WorldWideScience

Sample records for hierarchically designed national

  1. Hierarchical Network Design

    DEFF Research Database (Denmark)

    Thomadsen, Tommy

    2005-01-01

    of different types of hierarchical networks. This is supplemented by a review of ring network design problems and a presentation of a model allowing for modeling most hierarchical networks. We use methods based on linear programming to design the hierarchical networks. Thus, a brief introduction to the various....... The thesis investigates models for hierarchical network design and methods used to design such networks. In addition, ring network design is considered, since ring networks commonly appear in the design of hierarchical networks. The thesis introduces hierarchical networks, including a classification scheme...... linear programming based methods is included. The thesis is thus suitable as a foundation for study of design of hierarchical networks. The major contribution of the thesis consists of seven papers which are included in the appendix. The papers address hierarchical network design and/or ring network...

  2. Hierarchical Network Design

    DEFF Research Database (Denmark)

    Thomadsen, Tommy

    2005-01-01

    Communication networks are immensely important today, since both companies and individuals use numerous services that rely on them. This thesis considers the design of hierarchical (communication) networks. Hierarchical networks consist of layers of networks and are well-suited for coping...... the clusters. The design of hierarchical networks involves clustering of nodes, hub selection, and network design, i.e. selection of links and routing of ows. Hierarchical networks have been in use for decades, but integrated design of these networks has only been considered for very special types of networks....... The thesis investigates models for hierarchical network design and methods used to design such networks. In addition, ring network design is considered, since ring networks commonly appear in the design of hierarchical networks. The thesis introduces hierarchical networks, including a classification scheme...

  3. Design of Hierarchical Structures for Synchronized Deformations

    Science.gov (United States)

    Seifi, Hamed; Javan, Anooshe Rezaee; Ghaedizadeh, Arash; Shen, Jianhu; Xu, Shanqing; Xie, Yi Min

    2017-01-01

    In this paper we propose a general method for creating a new type of hierarchical structures at any level in both 2D and 3D. A simple rule based on a rotate-and-mirror procedure is introduced to achieve multi-level hierarchies. These new hierarchical structures have remarkably few degrees of freedom compared to existing designs by other methods. More importantly, these structures exhibit synchronized motions during opening or closure, resulting in uniform and easily-controllable deformations. Furthermore, a simple analytical formula is found which can be used to avoid collision of units of the structure during the closing process. The novel design concept is verified by mathematical analyses, computational simulations and physical experiments.

  4. Hierarchical Design Method for Micro Device

    Directory of Open Access Journals (Sweden)

    Zheng Liu

    2013-05-01

    Full Text Available Traditional mask-beginning design flow of micro device is unintuitive and fussy for designers. A hierarchical design method and involved key technologies for features mapping procedure are presented. With the feature-based design framework, the model of micro device is organized by various features in different designing stages, which can be converted into each other based on the mapping rules. The feature technology is the foundation of the three-level design flow that provides a more efficient design way. In system level, functional features provide the top level of schematic and functional description. After the functional mapping procedure, on the other hand, parametric design features construct the 3D model of micro device in device level, which is based on Hybird Model representation. By means of constraint features, the corresponding revision rules are applied to the rough model to optimize the original structure. As a result, the model reconstruction algorithm makes benefit for the model revision and constraint features mapping process. Moreover, the formulating description of manufacturing features derivation provides the automatic way for model conversion.

  5. Hierarchical Codebook Design for Massive MIMO

    Directory of Open Access Journals (Sweden)

    Xin Su

    2015-02-01

    Full Text Available The Research of Massive MIMO is an emerging area, since the more antennas the transmitters or receivers equipped with, the higher spectral efficiency and link reliability the system can provide. Due to the limited feedback channel, precoding and codebook design are important to exploit the performance of massive MIMO. To improve the precoding performance, we propose a novel hierarchical codebook with the Fourier-based perturbation matrices as the subcodebook and the Kerdock codebook as the main codebook, which could reduce storage and search complexity due to the finite a lphabet. Moreover, t o f urther r educe t he search complexity and feedback overhead without noticeable performance degradation, we use an adaptive selection algorithm to decide whether to use the subcodebook. Simulation results show that the proposed codebook has remarkable performance gain compared to the conventional Kerdock codebook, without significant increase in feedback overhead and search complexity.

  6. Hierarchical Network Design Using Simulated Annealing

    DEFF Research Database (Denmark)

    Thomadsen, Tommy; Clausen, Jens

    2002-01-01

    The hierarchical network problem is the problem of finding the least cost network, with nodes divided into groups, edges connecting nodes in each groups and groups ordered in a hierarchy. The idea of hierarchical networks comes from telecommunication networks where hierarchies exist. Hierarchical...... networks are described and a mathematical model is proposed for a two level version of the hierarchical network problem. The problem is to determine which edges should connect nodes, and how demand is routed in the network. The problem is solved heuristically using simulated annealing which as a sub......-algorithm uses a construction algorithm to determine edges and route the demand. Performance for different versions of the algorithm are reported in terms of runtime and quality of the solutions. The algorithm is able to find solutions of reasonable quality in approximately 1 hour for networks with 100 nodes....

  7. Micromechanical design of hierarchical composites using global load sharing theory

    Science.gov (United States)

    Rajan, V. P.; Curtin, W. A.

    2016-05-01

    Hierarchical composites, embodied by natural materials ranging from bone to bamboo, may offer combinations of material properties inaccessible to conventional composites. Using global load sharing (GLS) theory, a well-established micromechanics model for composites, we develop accurate numerical and analytical predictions for the strength and toughness of hierarchical composites with arbitrary fiber geometries, fiber strengths, interface properties, and number of hierarchical levels, N. The model demonstrates that two key material properties at each hierarchical level-a characteristic strength and a characteristic fiber length-control the scalings of composite properties. One crucial finding is that short- and long-fiber composites behave radically differently. Long-fiber composites are significantly stronger than short-fiber composites, by a factor of 2N or more; they are also significantly tougher because their fiber breaks are bridged by smaller-scale fibers that dissipate additional energy. Indeed, an "infinite" fiber length appears to be optimal in hierarchical composites. However, at the highest level of the composite, long fibers localize on planes of pre-existing damage, and thus short fibers must be employed instead to achieve notch sensitivity and damage tolerance. We conclude by providing simple guidelines for microstructural design of hierarchical composites, including the selection of N, the fiber lengths, the ratio of length scales at successive hierarchical levels, the fiber volume fractions, and the desired properties of the smallest-scale reinforcement. Our model enables superior hierarchical composites to be designed in a rational way, without resorting either to numerical simulation or trial-and-error-based experimentation.

  8. Urban pattern: Layout design by hierarchical domain splitting

    KAUST Repository

    Yang, Yongliang

    2013-11-01

    We present a framework for generating street networks and parcel layouts. Our goal is the generation of high-quality layouts that can be used for urban planning and virtual environments. We propose a solution based on hierarchical domain splitting using two splitting types: streamline-based splitting, which splits a region along one or multiple streamlines of a cross field, and template-based splitting, which warps pre-designed templates to a region and uses the interior geometry of the template as the splitting lines. We combine these two splitting approaches into a hierarchical framework, providing automatic and interactive tools to explore the design space.

  9. Hierarchical robust nonlinear switching control design for propulsion systems

    Science.gov (United States)

    Leonessa, Alexander

    1999-09-01

    The desire for developing an integrated control system- design methodology for advanced propulsion systems has led to significant activity in modeling and control of flow compression systems in recent years. In this dissertation we develop a novel hierarchical switching control framework for addressing the compressor aerodynamic instabilities of rotating stall and surge. The proposed control framework accounts for the coupling between higher-order modes while explicitly addressing actuator rate saturation constraints and system modeling uncertainty. To develop a hierarchical nonlinear switching control framework, first we develop generalized Lyapunov and invariant set theorems for nonlinear dynamical systems wherein all regularity assumptions on the Lyapunov function and the system dynamics are removed. In particular, local and global stability theorems are given using lower semicontinuous Lyapunov functions. Furthermore, generalized invariant set theorems are derived wherein system trajectories converge to a union of largest invariant sets contained in intersections over finite intervals of the closure of generalized Lyapunov level surfaces. The proposed results provide transparent generalizations to standard Lyapunov and invariant set theorems. Using the generalized Lyapunov and invariant set theorems, a nonlinear control-system design framework predicated on a hierarchical switching controller architecture parameterized over a set of moving system equilibria is developed. Specifically, using equilibria- dependent Lyapunov functions, a hierarchical nonlinear control strategy is developed that stabilizes a given nonlinear system by stabilizing a collection of nonlinear controlled subsystems. The switching nonlinear controller architecture is designed based on a generalized lower semicontinuous Lyapunov function obtained by minimizing a potential function over a given switching set induced by the parameterized system equilibria. The proposed framework provides a

  10. Design of Hierarchical Ring Networks Using Branch-and-Price

    DEFF Research Database (Denmark)

    Thomadsen, Tommy; Stidsen, Thomas K.

    2004-01-01

    We consider the problem of designing hierarchical two layer ring networks. The top layer consists of a federal-ring which establishes connection between a number of node disjoint metro-rings in a bottom layer. The objective is to minimize the costs of links in the network, taking both the fixed...... link establishment costs and the link capacity costs into account. The hierarchical two layer ring network design problem is solved in two stages: First the bottom layer, i.e. the metro-rings are designed, implicitly taking into account the capacity cost of the federal-ring. Then the federal......-ring is designed connecting the metro-rings, minimizing fixed link establishment costs of the federal-ring. A branch-and-price algorithm is presented for the design of the bottom layer and it is suggested that existing methods are used for the design of the federal-ring. Computational results are given...

  11. Hierarchical Ring Network Design Using Branch-and-Price

    DEFF Research Database (Denmark)

    Thomadsen, Tommy; Stidsen, Thomas K.

    2005-01-01

    We consider the problem of designing hierarchical two layer ring networks. The top layer consists of a federal-ring which establishes connection between a number of node disjoint metro-rings in a bottom layer. The objective is to minimize the costs of links in the network, taking both the fixed l...... for jointly solving the clustering problem, the metro ring design problem and the routing problem. Computational results are given for networks with up to 36 nodes.......We consider the problem of designing hierarchical two layer ring networks. The top layer consists of a federal-ring which establishes connection between a number of node disjoint metro-rings in a bottom layer. The objective is to minimize the costs of links in the network, taking both the fixed...... link establishment costs and the link capacity costs into account. Hierarchical ring network design problems combines the following optimization problems: Clustering, hub selection, metro ring design, federal ring design and routing problems. In this paper a branch-and-price algorithm is presented...

  12. Impact of hierarchical memory systems on linear algebra algorithm design

    Energy Technology Data Exchange (ETDEWEB)

    Gallivan, K.; Jalby, W.; Meier, U.; Sameh, A.H.

    1988-01-01

    Linear algebra algorithms based on the BLAS or extended BLAS do not achieve high performance on multivector processors with a hierarchical memory system because of a lack of data locality. For such machines, block linear algebra algorithms must be implemented in terms of matrix-matrix primitives (BLAS3). Designing efficient linear algebra algorithms for these architectures requires analysis of the behavior of the matrix-matrix primitives and the resulting block algorithms as a function of certain system parameters. The analysis must identify the limits of performance improvement possible via blocking and any contradictory trends that require trade-off consideration. The authors propose a methodology that facilitates such an analysis and use it to analyze the performance of the BLAS3 primitives used in block methods. A similar analysis of the block size-performance relationship is also performed at the algorithm level for block versions of the LU decomposition and the Gram-Schmidt orthogonalization procedures.

  13. Virtual Screening and Molecular Design Based on Hierarchical Qsar Technology

    Science.gov (United States)

    Kuz'min, Victor E.; Artemenko, A. G.; Muratov, Eugene N.; Polischuk, P. G.; Ognichenko, L. N.; Liahovsky, A. V.; Hromov, A. I.; Varlamova, E. V.

    This chapter is devoted to the hierarchical QSAR technology (HiT QSAR) based on simplex representation of molecular structure (SiRMS) and its application to different QSAR/QSPR tasks. The essence of this technology is a sequential solution (with the use of the information obtained on the previous steps) of the QSAR paradigm by a series of enhanced models based on molecular structure description (in a specific order from 1D to 4D). Actually, it's a system of permanently improved solutions. Different approaches for domain applicability estimation are implemented in HiT QSAR. In the SiRMS approach every molecule is represented as a system of different simplexes (tetratomic fragments with fixed composition, structure, chirality, and symmetry). The level of simplex descriptors detailed increases consecutively from the 1D to 4D representation of the molecular structure. The advantages of the approach presented are an ability to solve QSAR/QSPR tasks for mixtures of compounds, the absence of the "molecular alignment" problem, consideration of different physical-chemical properties of atoms (e.g., charge, lipophilicity), and the high adequacy and good interpretability of obtained models and clear ways for molecular design. The efficiency of HiT QSAR was demonstrated by its comparison with the most popular modern QSAR approaches on two representative examination sets. The examples of successful application of the HiT QSAR for various QSAR/QSPR investigations on the different levels (1D-4D) of the molecular structure description are also highlighted. The reliability of developed QSAR models as the predictive virtual screening tools and their ability to serve as the basis of directed drug design was validated by subsequent synthetic, biological, etc. experiments. The HiT QSAR is realized as the suite of computer programs termed the "HiT QSAR" software that so includes powerful statistical capabilities and a number of useful utilities.

  14. Evaluation Model of Design for Operation and Architecture of Hierarchical Virtual Simulation for Flight Vehicle Design

    Institute of Scientific and Technical Information of China (English)

    LIU Hu; TIAN Yongliang; ZHANG Chaoying; YIN Jiao; SUN Yijie

    2012-01-01

    In order to take requirements for commercial operations or military missions into better consideration in new flight vehicle design,a tri-hierarchical task classification model of "design for operation" is proposed,which takes basic man-object interaction task,complex collaborative operation and large-scale joint operation into account.The corresponding general architecture of evaluation criteria is also depicted.Then a virtual simulation-based approach to implement the evaluations at three hierarchy levels is mainly analyzed with a detailed example,which validates the feasibility and effectiveness of evaluation architecture.Finally,extending the virtual simulation architecture from design to operation training is discussed.

  15. Hierarchical sliding mode control for under-actuated cranes design, analysis and simulation

    CERN Document Server

    Qian, Dianwei

    2015-01-01

    This book reports on the latest developments in sliding mode overhead crane control, presenting novel research ideas and findings on sliding mode control (SMC), hierarchical SMC and compensator design-based hierarchical sliding mode. The results, which were previously scattered across various journals and conference proceedings, are now presented in a systematic and unified form. The book will be of interest to researchers, engineers and graduate students in control engineering and mechanical engineering who want to learn the methods and applications of SMC.

  16. The Hierarchical Specification and Mechanical Verification of the SIFT Design

    Science.gov (United States)

    1983-01-01

    The formal specification and proof methodology employed to demonstrate that the SIFT computer system meets its requirements are described. The hierarchy of design specifications is shown, from very abstract descriptions of system function down to the implementation. The most abstract design specifications are simple and easy to understand, almost all details of the realization were abstracted out, and are used to ensure that the system functions reliably and as intended. A succession of lower level specifications refines these specifications into more detailed, and more complex, views of the system design, culminating in the Pascal implementation. The section describes the rigorous mechanical proof that the abstract specifications are satisfied by the actual implementation.

  17. Intraclass Correlation Coefficients in Hierarchical Designs: Evaluation Using Latent Variable Modeling

    Science.gov (United States)

    Raykov, Tenko

    2011-01-01

    Interval estimation of intraclass correlation coefficients in hierarchical designs is discussed within a latent variable modeling framework. A method accomplishing this aim is outlined, which is applicable in two-level studies where participants (or generally lower-order units) are clustered within higher-order units. The procedure can also be…

  18. Design And Analysis Of Low Power Hierarchical Decoder

    Directory of Open Access Journals (Sweden)

    Abhinav Singh

    2012-11-01

    Full Text Available Due to the high degree of miniaturization possible today in semiconductor technology, the size and complexity of designs that may be implemented in hardware has increased dramatically. Process scaling has been used in the miniaturization process to reduce the area needed for logic functions in an effort to lower the product costs. Precharged Complementary Metal Oxide Semiconductor (CMOS domino logic techniques may be applied to functional blocks to reduce power. Domino logic forms an attractive design style for high performance designs since its low switching threshold and reduced transistor count leads to fast and area efficient circuit implementations. In this paper all the necessary components required to form a 5-to-32 bit decoder using domino logic are designed to perform different analysis at 180nm & 350 nm technologies. Decoderimplemented through domino logic is compared to static decoder.

  19. Hierarchical Distributed Control Design for Multi-agent Systems Using Approximate Simulation

    Institute of Scientific and Technical Information of China (English)

    TANG Yu-Tao; HONG Yi-Guang

    2013-01-01

    In this paper,we consider a hierarchical control design for multi-agent systems based on approximate simulation.To reduce complexity,we first construct a simple abstract system to guide the agents,then we discuss the simulation relations between the abstract system and multiple agents.With the help of this abstract system,distributed hierarchical control is proposed to complete a coordination task.By virtue of a common Lyapunov function,we analyze the collective behaviors with switching multi-agent topology in light of simulation functions.

  20. Design of Experiments for Factor Hierarchization in Complex Structure Modelling

    Directory of Open Access Journals (Sweden)

    C. Kasmi

    2013-07-01

    Full Text Available Modelling the power-grid network is of fundamental interest to analyse the conducted propagation of unintentional and intentional electromagnetic interferences. The propagation is indeed highly influenced by the channel behaviour. In this paper, we investigate the effects of appliances and the position of cables in a low voltage network. First, the power-grid architecture is described. Then, the principle of Experimental Design is recalled. Next, the methodology is applied to power-grid modelling. Finally, we propose an analysis of the statistical moments of the experimental design results. Several outcomes are provided to describe the effects induced by parameter variability on the conducted propagation of spurious compromising emanations.

  1. Hierarchical classifier design in high-dimensional, numerous class cases

    Science.gov (United States)

    Kim, Byungyong; Landgrebe, David A.

    1991-01-01

    As progress in new sensor technology continues, increasingly high spectral resolution sensors are being developed. These sensors give more detailed and complex data for each picture element and greatly increase the dimensionality of data over past systems. Three methods for designing a decision tree classifier are discussed; a top down approach, a bottom up approach, and a hybrid approach. Three feature extraction techniques are implemented. Canonical and extended canonical techniques are mainly dependent on the mean difference between two classes. An autocorrelation technique is dependent on the correlation differences. The mathematical relationship among sample size, dimensionality, and risk value is derived.

  2. Designing superhydrophobic disordered arrays of fibers with hierarchical roughness and low-surface-energy

    Science.gov (United States)

    Rawal, Amit; Sharma, Sumit; Kumar, Vijay; Saraswat, Harshvardhan

    2016-12-01

    Hierarchical roughness and low surface energy are the main criteria for designing superhydrophobic surfaces with extreme water repellency. Herein, we present a step-wise approach to devise three-dimensional (3D) superhydrophobic disordered arrays of fibers in the form of nonwoven mats exhibiting hierarchical surface roughness and low surface energy. Key design parameters in the form of roughness factors at multiple length scales for 3D nonwoven mats have been quantified. The contact angles have been predicted for each of the wetting regimes that exists for nonwoven mats with predefined level of hierarchical surface roughness and surface energy. Experimental realization of superhydrophobic mats was attained by decorating the highly hydrophilic nonwoven viscose fibers with ZnO rods that effectively modulated the surface roughness at multiple length scales and subsequently, the surface energy was lowered using fluorocarbon treatment. Synergistic effects of hierarchical roughness and surface energy have systematically increased the static water contact angle of nonwoven mat (up to 164°) and simultaneously, lowered the roll-off angle (≈11°).

  3. Implementation of Hierarchical Task Analysis for User Interface Design in Drawing Application for Early Childhood Education

    National Research Council Canada - National Science Library

    Mira Kania Sabariah; Veronikha Effendy; Muhamad Fachmi Ichsan

    2016-01-01

    ... of learning and characteristics of early childhood (4-6 years). Based on the results, Hierarchical Task Analysis method generated a list of tasks that must be done in designing an user interface that represents the user experience in draw learning. Then by using the Heuristic Evaluation method the usability of the model has fulfilled a very good level of understanding and also it can be enhanced and produce a better model.

  4. Efficient Hierarchical Algorithm for Mixed Mode Placement in Three Dimensional Integrated Circuit Chip Designs

    Institute of Scientific and Technical Information of China (English)

    YAN Haixia; ZHOU Qiang; HONG Xianlong; LI Zhuoyuan

    2009-01-01

    Hierarchical art was used to solve the mixed mode placement for three dimensional (3-D) inte-grated circuit design. The 3-D placement flow stream includes hierarchical clustering, hierarchical 3-D floor-planning, vertical via mapping, and recursive two dimensional (2-D) global/detailed placement phases. With state-of-the-art clustering and de-clustering phases, the design complexity was reduced to enhance the placement algorithm efficiency and capacity. The 3-D floorplanning phase solved the layer assignment problem and controlled the number of vertical vias. The vertical via mapping transformed the 3-D placement problem to a set of 2-D placement sub-problems, which not only simplifies the original 3-D placement prob-lem, but also generates the vertical via assignment solution for the routing phase. The design optimizes both the wire length and the thermal load in the floorplan and placement phases to improve the performance and reliability of 3-D integrate circuits. Experiments on IBM benchmarks show that the total wire length is reduced from 15% to 35% relative to 2-D placement with two to four stacked layers, with the number of vertical vias minimized to satisfy a pre-defined upper bound constraint. The maximum temperature is reduced by 16% with two-stage optimization on four stacked layers.

  5. Hierarchical Modeling and Robust Synthesis for the Preliminary Design of Large Scale Complex Systems

    Science.gov (United States)

    Koch, Patrick N.

    1997-01-01

    Large-scale complex systems are characterized by multiple interacting subsystems and the analysis of multiple disciplines. The design and development of such systems inevitably requires the resolution of multiple conflicting objectives. The size of complex systems, however, prohibits the development of comprehensive system models, and thus these systems must be partitioned into their constituent parts. Because simultaneous solution of individual subsystem models is often not manageable iteration is inevitable and often excessive. In this dissertation these issues are addressed through the development of a method for hierarchical robust preliminary design exploration to facilitate concurrent system and subsystem design exploration, for the concurrent generation of robust system and subsystem specifications for the preliminary design of multi-level, multi-objective, large-scale complex systems. This method is developed through the integration and expansion of current design techniques: Hierarchical partitioning and modeling techniques for partitioning large-scale complex systems into more tractable parts, and allowing integration of subproblems for system synthesis; Statistical experimentation and approximation techniques for increasing both the efficiency and the comprehensiveness of preliminary design exploration; and Noise modeling techniques for implementing robust preliminary design when approximate models are employed. Hierarchical partitioning and modeling techniques including intermediate responses, linking variables, and compatibility constraints are incorporated within a hierarchical compromise decision support problem formulation for synthesizing subproblem solutions for a partitioned system. Experimentation and approximation techniques are employed for concurrent investigations and modeling of partitioned subproblems. A modified composite experiment is introduced for fitting better predictive models across the ranges of the factors, and an approach for

  6. Simple and cost-effective fabrication of highly flexible, transparent superhydrophobic films with hierarchical surface design.

    Science.gov (United States)

    Kim, Tae-Hyun; Ha, Sung-Hun; Jang, Nam-Su; Kim, Jeonghyo; Kim, Ji Hoon; Park, Jong-Kweon; Lee, Deug-Woo; Lee, Jaebeom; Kim, Soo-Hyung; Kim, Jong-Man

    2015-03-11

    Optical transparency and mechanical flexibility are both of great importance for significantly expanding the applicability of superhydrophobic surfaces. Such features make it possible for functional surfaces to be applied to various glass-based products with different curvatures. In this work, we report on the simple and potentially cost-effective fabrication of highly flexible and transparent superhydrophobic films based on hierarchical surface design. The hierarchical surface morphology was easily fabricated by the simple transfer of a porous alumina membrane to the top surface of UV-imprinted polymeric micropillar arrays and subsequent chemical treatments. Through optimization of the hierarchical surface design, the resultant superhydrophobic films showed superior surface wetting properties (with a static contact angle of >170° and contact angle hysteresis of 82% at 550 nm wavelength). The superhydrophobic films were also experimentally found to be robust without significant degradation in the superhydrophobicity, even under repetitive bending and pressing for up to 2000 cycles. Finally, the practical usability of the proposed superhydorphobic films was clearly demonstrated by examining the antiwetting performance in real time while pouring water on the film and submerging the film in water.

  7. Hierarchical nanostructured carbons with meso-macroporosity: design, characterization, and applications.

    Science.gov (United States)

    Fang, Baizeng; Kim, Jung Ho; Kim, Min-Sik; Yu, Jong-Sung

    2013-07-16

    Nanostructured porous carbon materials have diverse applications including sorbents, catalyst supports for fuel cells, electrode materials for capacitors, and hydrogen storage systems. When these materials have hierarchical porosity, interconnected pores of different dimensions, their potential application is increased. Hierarchical nanostructured carbons (HNCs) that contain 3D-interconnected macroporous/mesoporous and mesoporous/microporous structures have enhanced properties compared with single-sized porous carbon materials, because they have improved mass transport through the macropores/mesopores and enhanced selectivity and increased specific surface area on the level of fine pore systems through mesopores/micropores. The HNCs with macro/mesoporosity are of particular interest because chemists can tailor specific applications through controllable synthesis of HNCs with designed nanostructures. An efficient and commonly used technique for creating HNCs is "nanocasting", a technique that first involves the creation of a sacrificial silica template with hierarchical porous nanostructure and then the impregnation of the silica template with an appropriate carbon source. This is followed by carbonization of the filled carbon precursor, and subsequent removal of the silica template. The resulting HNC is an inverse replica of its parent hierarchical nanostructured silica (HNS). Through such nanocasting, scientists can create different HNC frameworks with tailored pore structures and narrow pore size distribution. Generally, HNSs with specific structure and 3D-interconnected porosity are needed to fabricate HNCs using the nanocasting strategy. However, how can we fabricate a HNS framework with tailored structure and hierarchical porosity of meso-macropores? This Account reports on our recent work in the development of novel HNCs and their interesting applications. We have explored a series of strategies to address the challenges in synthesis of HNSs and HNCs. Through

  8. A debugging system for azimuthally acoustic logging tools based on modular and hierarchical design ideas

    Science.gov (United States)

    Zhang, K.; Ju, X. D.; Lu, J. Q.; Men, B. Y.

    2016-08-01

    On the basis of modular and hierarchical design ideas, this study presents a debugging system for an azimuthally sensitive acoustic bond tool (AABT). The debugging system includes three parts: a personal computer (PC), embedded front-end machine and function expansion boards. Modular and hierarchical design ideas are conducted in all design and debug processes. The PC communicates with the front-end machine via the Internet, and the front-end machine and function expansion boards connect each other by the extended parallel bus. In this method, the three parts of the debugging system form stable and high-speed data communication. This study not only introduces the system-level debugging and sub-system level debugging of the tool but also the debugging of the analogue signal processing board, which is important and greatly used in logging tools. Experiments illustrate that the debugging system can greatly improve AABT verification and calibration efficiency and that, board-level debugging can examine and improve analogue signal processing boards. The design thinking is clear and the design structure is reasonable, thus making it easy to extend and upgrade the debugging system.

  9. Design and Co-simulation of Hierarchical Architecture for Demand Response Control and Coordination

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu Prasad; Lévesque, Martin; Bak-Jensen, Birgitte

    2017-01-01

    Demand response (DR) plays a key role for optimum asset utilization and to avoid or delay the need of new infrastructure investment. However, coordinated execution of multiple DRs is desired to maximize the DR benefits. In this study, we propose a hierarchical DR architecture (HDRA) to control...... and coordinate the performance of various DR categories such that the operation of every DR category is backed-up by time delayed action of the others. A reliable, cost-effective communication infrastructure based on ZigBee, WiMAX, and fibers is designed to facilitate the HDRA execution. The performance...

  10. Hierarchical star formation across the grand-design spiral NGC 1566

    Science.gov (United States)

    Gouliermis, Dimitrios A.; Elmegreen, Bruce G.; Elmegreen, Debra M.; Calzetti, Daniela; Cignoni, Michele; Gallagher, John S., III; Kennicutt, Robert C.; Klessen, Ralf S.; Sabbi, Elena; Thilker, David; Ubeda, Leonardo; Aloisi, Alessandra; Adamo, Angela; Cook, David O.; Dale, Daniel; Grasha, Kathryn; Grebel, Eva K.; Johnson, Kelsey E.; Sacchi, Elena; Shabani, Fayezeh; Smith, Linda J.; Wofford, Aida

    2017-06-01

    We investigate how star formation is spatially organized in the grand-design spiral NGC 1566 from deep Hubble Space Telescope photometry with the Legacy ExtraGalactic UV Survey. Our contour-based clustering analysis reveals 890 distinct stellar conglomerations at various levels of significance. These star-forming complexes are organized in a hierarchical fashion with the larger congregations consisting of smaller structures, which themselves fragment into even smaller and more compact stellar groupings. Their size distribution, covering a wide range in length-scales, shows a power law as expected from scale-free processes. We explain this shape with a simple 'fragmentation and enrichment' model. The hierarchical morphology of the complexes is confirmed by their mass-size relation that can be represented by a power law with a fractional exponent, analogous to that determined for fractal molecular clouds. The surface stellar density distribution of the complexes shows a lognormal shape similar to that for supersonic non-gravitating turbulent gas. Between 50 and 65 per cent of the recently formed stars, as well as about 90 per cent of the young star clusters, are found inside the stellar complexes, located along the spiral arms. We find an age difference between young stars inside the complexes and those in their direct vicinity in the arms of at least 10 Myr. This time-scale may relate to the minimum time for stellar evaporation, although we cannot exclude the in situ formation of stars. As expected, star formation preferentially occurs in spiral arms. Our findings reveal turbulent-driven hierarchical star formation along the arms of a grand-design galaxy.

  11. A hierarchical approach for the design improvements of an Organocat biorefinery.

    Science.gov (United States)

    Abdelaziz, Omar Y; Gadalla, Mamdouh A; El-Halwagi, Mahmoud M; Ashour, Fatma H

    2015-04-01

    Lignocellulosic biomass has emerged as a potentially attractive renewable energy source. Processing technologies of such biomass, particularly its primary separation, still lack economic justification due to intense energy requirements. Establishing an economically viable and energy efficient biorefinery scheme is a significant challenge. In this work, a systematic approach is proposed for improving basic/existing biorefinery designs. This approach is based on enhancing the efficiency of mass and energy utilization through the use of a hierarchical design approach that involves mass and energy integration. The proposed procedure is applied to a novel biorefinery called Organocat to minimize its energy and mass consumption and total annualized cost. An improved heat exchanger network with minimum energy consumption of 4.5 MJ/kgdry biomass is designed. An optimal recycle network with zero fresh water usage and minimum waste discharge is also constructed, making the process more competitive and economically attractive. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Mechanics of robust and releasable adhesion in biology: Bottom up designed hierarchical structures of gecko

    Science.gov (United States)

    Yao, Haimin; Gao, Huajian

    2006-06-01

    Gecko and many insects have evolved specialized adhesive tissues with bottom-up designed (from nanoscale and up) hierarchical structures that allow them to maneuver on vertical walls and ceilings. The adhesion mechanisms of gecko must be robust enough to function on unknown rough surfaces and also easily releasable upon animal movement. How does nature design such macroscopic sized robust and releasable adhesion devices? How can an adhesion system designed for robust attachment simultaneously allow easy detachment? These questions have motivated the present investigation on mechanics of robust and releasable adhesion in biology. On the question of robust adhesion, we introduce a fractal gecko hairs model, which assumes self-similar fibrillar structures at multiple hierarchical levels mimicking gecko's spatula ultrastructure, to show that structural hierarchy plays a key role in robust adhesion: it allows the work of adhesion to be exponentially enhanced with each added level of hierarchy. We demonstrate that, barring fiber fracture, the fractal gecko hairs can be designed from nanoscale and up to achieve flaw tolerant adhesion at any length scales. However, consideration of crack-like flaws in the hairs themselves results in an upper size limit for flaw tolerant design. On the question of releasable adhesion, we hypothesize that the asymmetrically aligned seta hairs of gecko form a strongly anisotropic material with adhesion strength strongly varying with the direction of pulling. We use analytical solutions to show that a strongly anisotropic elastic solid indeed exhibits a strongly anisotropic adhesion strength when sticking on a rough surface. Furthermore, we perform finite element calculations to show that the adhesion strength of a strongly anisotropic attachment pad exhibits essentially two levels of adhesion strength depending on the direction of pulling, resulting in an orientation-controlled switch between attachment and detachment. These findings not only

  13. Design of Energy-efficient Hierarchical Scheduling for Integrated Modular Avionics Systems

    Institute of Scientific and Technical Information of China (English)

    ZHOU Tianran; XIONG Huagang

    2012-01-01

    Recently the integrated modular avionics (IMA) architecture which introduces the concept of resource partitions becomes popular as an alternative to the traditional federated architecture.This study investigates the problem of designing hierarchical scheduling for IMA systems.The proposed scheduler model enables strong temporal partitioning,so that multiple hard real-time applications can be easily integrated into an uniprocessor platform.This paper derives the mathematic relationships among partition cycle,partition capacity and schedulability under the real-time condition,and then proposes an algorithm for optimizing partition parameters.Real-time tasks with arbitrary deadlines are considered for generality.To further improve the basic algorithm and reduce the energy consumption for embedded systems in aircraft,a power optimization approach is also proposed by exploiting the slack time.Experimental results show that the designed system can guarantee the hard real-time requirement and reduce the power consumption by at least 14%.

  14. Hierarchical Materials Design by Pattern Transfer Printing of Self-Assembled Binary Nanocrystal Superlattices

    Energy Technology Data Exchange (ETDEWEB)

    Paik, Taejong; Yun, Hongseok; Fleury, Blaise; Hong, Sung-Hoon; Jo, Pil Sung; Wu, Yaoting; Oh, Soong-Ju; Cargnello, Matteo; Yang, Haoran; Murray, Christopher B.; Kagan, Cherie R.

    2017-02-08

    We demonstrate the fabrication of hierarchical materials by controlling the structure of highly ordered binary nanocrystal superlattices (BNSLs) on multiple length scales. Combinations of magnetic, plasmonic, semiconducting, and insulating colloidal nanocrystal (NC) building blocks are self-assembled into BNSL membranes via the liquid–interfacial assembly technique. Free-standing BNSL membranes are transferred onto topographically structured poly(dimethylsiloxane) molds via the Langmuir–Schaefer technique and then deposited in patterns onto substrates via transfer printing. BNSLs with different structural motifs are successfully patterned into various meso- and microstructures such as lines, circles, and even three-dimensional grids across large-area substrates. A combination of electron microscopy and grazing incidence small-angle X-ray scattering (GISAXS) measurements confirm the ordering of NC building blocks in meso- and micropatterned BNSLs. This technique demonstrates structural diversity in the design of hierarchical materials by assembling BNSLs from NC building blocks of different composition and size by patterning BNSLs into various size and shape superstructures of interest for a broad range of applications.

  15. The impact of hierarchical memory systems on linear algebra algorithm design

    Energy Technology Data Exchange (ETDEWEB)

    Gallivan, K.; Jalby, W.; Meier, U.; Sameh, A.

    1987-09-14

    Performing an extremely detailed performance optimization analysis is counterproductive when the concern is performance behavior on a class of architecture, since general trends are obscured by the overwhelming number of machine-specific considerations required. Instead, in this paper, a methodology is used which identifies the effects of a hierarchical memory system on the performance of linear algebra algorithms on multivector processors; provides a means of producing a set of algorithm parameters, i.e., blocksizes, as functions of system parameters which yield near-optimal performance; and provides guidelines for algorithm designers which reduce the influence of the hierarchical memory system on algorithm performance to negligible levels and thereby allow them to concentrate on machine-specific optimizations. The remainder of this paper comprises five major discussions. First, the methodology and the attendant architectural model are discussed. Next, an analysis of the basic BLAS3 matrix-matrix primitive is presented. This is followed by a discussion of three block algorithms: a block LU decomposition, a block LDL/sup T/ decomposition and a block Gram-Schmidt algorithm. 22 refs., 9 figs.

  16. Hierarchical Materials Design by Pattern Transfer Printing of Self-Assembled Binary Nanocrystal Superlattices.

    Science.gov (United States)

    Paik, Taejong; Yun, Hongseok; Fleury, Blaise; Hong, Sung-Hoon; Jo, Pil Sung; Wu, Yaoting; Oh, Soong-Ju; Cargnello, Matteo; Yang, Haoran; Murray, Christopher B; Kagan, Cherie R

    2017-03-08

    We demonstrate the fabrication of hierarchical materials by controlling the structure of highly ordered binary nanocrystal superlattices (BNSLs) on multiple length scales. Combinations of magnetic, plasmonic, semiconducting, and insulating colloidal nanocrystal (NC) building blocks are self-assembled into BNSL membranes via the liquid-interfacial assembly technique. Free-standing BNSL membranes are transferred onto topographically structured poly(dimethylsiloxane) molds via the Langmuir-Schaefer technique and then deposited in patterns onto substrates via transfer printing. BNSLs with different structural motifs are successfully patterned into various meso- and microstructures such as lines, circles, and even three-dimensional grids across large-area substrates. A combination of electron microscopy and grazing incidence small-angle X-ray scattering (GISAXS) measurements confirm the ordering of NC building blocks in meso- and micropatterned BNSLs. This technique demonstrates structural diversity in the design of hierarchical materials by assembling BNSLs from NC building blocks of different composition and size by patterning BNSLs into various size and shape superstructures of interest for a broad range of applications.

  17. Using variance components to estimate power in a hierarchically nested sampling design.

    Science.gov (United States)

    Dzul, Maria C; Dixon, Philip M; Quist, Michael C; Dinsmore, Stephen J; Bower, Michael R; Wilson, Kevin P; Gaines, D Bailey

    2013-01-01

    We used variance components to assess allocation of sampling effort in a hierarchically nested sampling design for ongoing monitoring of early life history stages of the federally endangered Devils Hole pupfish (DHP) (Cyprinodon diabolis). Sampling design for larval DHP included surveys (5 days each spring 2007-2009), events, and plots. Each survey was comprised of three counting events, where DHP larvae on nine plots were counted plot by plot. Statistical analysis of larval abundance included three components: (1) evaluation of power from various sample size combinations, (2) comparison of power in fixed and random plot designs, and (3) assessment of yearly differences in the power of the survey. Results indicated that increasing the sample size at the lowest level of sampling represented the most realistic option to increase the survey's power, fixed plot designs had greater power than random plot designs, and the power of the larval survey varied by year. This study provides an example of how monitoring efforts may benefit from coupling variance components estimation with power analysis to assess sampling design.

  18. Hierarchical design of a polymeric nanovehicle for efficient tumor regression and imaging

    Science.gov (United States)

    An, Jinxia; Guo, Qianqian; Zhang, Peng; Sinclair, Andrew; Zhao, Yu; Zhang, Xinge; Wu, Kan; Sun, Fang; Hung, Hsiang-Chieh; Li, Chaoxing; Jiang, Shaoyi

    2016-04-01

    Effective delivery of therapeutics to disease sites significantly contributes to drug efficacy, toxicity and clearance. Here we designed a hierarchical polymeric nanoparticle structure for anti-cancer chemotherapy delivery by utilizing state-of-the-art polymer chemistry and co-assembly techniques. This novel structural design combines the most desired merits for drug delivery in a single particle, including a long in vivo circulation time, inhibited non-specific cell uptake, enhanced tumor cell internalization, pH-controlled drug release and simultaneous imaging. This co-assembled nanoparticle showed exceptional stability in complex biological media. Benefiting from the synergistic effects of zwitterionic and multivalent galactose polymers, drug-loaded nanoparticles were selectively internalized by cancer cells rather than normal tissue cells. In addition, the pH-responsive core retained their cargo within their polymeric coating through hydrophobic interaction and released it under slightly acidic conditions. In vivo pharmacokinetic studies in mice showed minimal uptake of nanoparticles by the mononuclear phagocyte system and excellent blood circulation half-lives of 14.4 h. As a result, tumor growth was completely inhibited and no damage was observed for normal organ tissues. This newly developed drug nanovehicle has great potential in cancer therapy, and the hierarchical design principle should provide valuable information for the development of the next generation of drug delivery systems.Effective delivery of therapeutics to disease sites significantly contributes to drug efficacy, toxicity and clearance. Here we designed a hierarchical polymeric nanoparticle structure for anti-cancer chemotherapy delivery by utilizing state-of-the-art polymer chemistry and co-assembly techniques. This novel structural design combines the most desired merits for drug delivery in a single particle, including a long in vivo circulation time, inhibited non-specific cell uptake

  19. Optimizing Blocking and Nonblocking Reduction Operations for Multicore Systems: Hierarchical Design and Implementation

    Energy Technology Data Exchange (ETDEWEB)

    Gorentla Venkata, Manjunath [ORNL; Shamis, Pavel [ORNL; Graham, Richard L [ORNL; Ladd, Joshua S [ORNL; Sampath, Rahul S [ORNL

    2013-01-01

    Many scientific simulations, using the Message Passing Interface (MPI) programming model, are sensitive to the performance and scalability of reduction collective operations such as MPI Allreduce and MPI Reduce. These operations are the most widely used abstractions to perform mathematical operations over all processes that are part of the simulation. In this work, we propose a hierarchical design to implement the reduction operations on multicore systems. This design aims to improve the efficiency of reductions by 1) tailoring the algorithms and customizing the implementations for various communication mechanisms in the system 2) providing the ability to configure the depth of hierarchy to match the system architecture, and 3) providing the ability to independently progress each of this hierarchy. Using this design, we implement MPI Allreduce and MPI Reduce operations (and its nonblocking variants MPI Iallreduce and MPI Ireduce) for all message sizes, and evaluate on multiple architectures including InfiniBand and Cray XT5. We leverage and enhance our existing infrastructure, Cheetah, which is a framework for implementing hierarchical collective operations to implement these reductions. The experimental results show that the Cheetah reduction operations outperform the production-grade MPI implementations such as Open MPI default, Cray MPI, and MVAPICH2, demonstrating its efficiency, flexibility and portability. On Infini- Band systems, with a microbenchmark, a 512-process Cheetah nonblocking Allreduce and Reduce achieves a speedup of 23x and 10x, respectively, compared to the default Open MPI reductions. The blocking variants of the reduction operations also show similar performance benefits. A 512-process nonblocking Cheetah Allreduce achieves a speedup of 3x, compared to the default MVAPICH2 Allreduce implementation. On a Cray XT5 system, a 6144-process Cheetah Allreduce outperforms the Cray MPI by 145%. The evaluation with an application kernel, Conjugate

  20. Hierarchical photocatalysts.

    Science.gov (United States)

    Li, Xin; Yu, Jiaguo; Jaroniec, Mietek

    2016-05-01

    As a green and sustainable technology, semiconductor-based heterogeneous photocatalysis has received much attention in the last few decades because it has potential to solve both energy and environmental problems. To achieve efficient photocatalysts, various hierarchical semiconductors have been designed and fabricated at the micro/nanometer scale in recent years. This review presents a critical appraisal of fabrication methods, growth mechanisms and applications of advanced hierarchical photocatalysts. Especially, the different synthesis strategies such as two-step templating, in situ template-sacrificial dissolution, self-templating method, in situ template-free assembly, chemically induced self-transformation and post-synthesis treatment are highlighted. Finally, some important applications including photocatalytic degradation of pollutants, photocatalytic H2 production and photocatalytic CO2 reduction are reviewed. A thorough assessment of the progress made in photocatalysis may open new opportunities in designing highly effective hierarchical photocatalysts for advanced applications ranging from thermal catalysis, separation and purification processes to solar cells.

  1. Implementation of Hierarchical Task Analysis for User Interface Design in Drawing Application for Early Childhood Education

    Directory of Open Access Journals (Sweden)

    Mira Kania Sabariah

    2016-05-01

    Full Text Available Draw learning in early childhood is an important lesson and full of stimulation of the process of growth and development of children which could help to train the fine motor skills. We have had a lot of applications that can be used to perform learning, including interactive learning applications. Referring to the observations that have been conducted showed that the experiences given by the applications that exist today are very diverse and have not been able to represent the model of learning and characteristics of early childhood (4-6 years. Based on the results, Hierarchical Task Analysis method generated a list of tasks that must be done in designing an user interface that represents the user experience in draw learning. Then by using the Heuristic Evaluation method the usability of the model has fulfilled a very good level of understanding and also it can be enhanced and produce a better model.

  2. A hierarchical layout design method based on rubber band potentialenergy descending

    Directory of Open Access Journals (Sweden)

    Ou Cheng Yi

    2016-01-01

    Full Text Available Strip packing problems is one important sub-problem of the Cutting stock problems. Its application domains include sheet metal, ship making, wood, furniture, garment, shoes and glass. In this paper, a hierarchical layout design method based on rubber band potential-energy descending was proposed. The basic concept of the rubber band enclosing model was described in detail. We divided the layout process into three different stages: initial layout stage, rubber band enclosing stage and local adjustment stage. In different stages, the most efficient strategies were employed for further improving the layout solution. Computational results show that the proposed method performed better than the GLSHA algorithm for three out of nine instances in utilization.

  3. Extending hierarchical task analysis to identify cognitive demands and information design requirements.

    Science.gov (United States)

    Phipps, Denham L; Meakin, George H; Beatty, Paul C W

    2011-07-01

    While hierarchical task analysis (HTA) is well established as a general task analysis method, there appears a need to make more explicit both the cognitive elements of a task and design requirements that arise from an analysis. One way of achieving this is to make use of extensions to the standard HTA. The aim of the current study is to evaluate the use of two such extensions--the sub-goal template (SGT) and the skills-rules-knowledge (SRK) framework--to analyse the cognitive activity that takes place during the planning and delivery of anaesthesia. In quantitative terms, the two methods were found to have relatively poor inter-rater reliability; however, qualitative evidence suggests that the two methods were nevertheless of value in generating insights about anaesthetists' information handling and cognitive performance. Implications for the use of an extended HTA to analyse work systems are discussed.

  4. Rational design of hierarchically nanostructured electrodes for solid oxide fuel cells

    Science.gov (United States)

    Çelikbilek, Ӧzden; Jauffrès, David; Siebert, Elisabeth; Dessemond, Laurent; Burriel, Mónica; Martin, Christophe L.; Djurado, Elisabeth

    2016-11-01

    Understanding, controlling and optimizing the mechanisms of electrode reactions need to be addressed for high performance energy and storage conversion devices. Hierarchically structured porous films of mixed ionic electronic conductors (MIECs) and their composites with ionic conductors offer unique properties. However, correlating the intrinsic properties of electrode components to microstructural features remains a challenging task. Here, La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) and La0.6Sr0.4Co0.2Fe0.8O3-δ: Ce0.9Gd0.1O2-δ (LSCF:CGO) composite cathodes with hierarchical porosity from nano to micro range are fabricated. The LSCF film exhibits exceptional electrode performance with area specific resistance values of 0.021 and 0.065 Ω cm2 at 650 and 600 °C respectively, whereas LSCF:CGO composite is only slightly superior than pure LSCF below 450 °C. We report for the first time a numerical 3D Finite Element Model (FEM) comprising real micro/nanostructural parameters from 3D reconstructions into a simple geometry similar to experimentally observed columnar features. The model demonstrates that heterogeneities in porosity within the film thickness and percolation of the ionically conducting phase significantly impact bulk transport at low temperatures. Design guidelines relating performance to microstructure and bulk material properties in relation to experimental results are proposed. Our model has potential to be extended for rational design of larger, regular and heterogeneous microstructures.

  5. An Isogeometric Design-through-analysis Methodology based on Adaptive Hierarchical Refinement of NURBS, Immersed Boundary Methods, and T-spline CAD Surfaces

    Science.gov (United States)

    2012-01-22

    ICES REPORT 12-05 January 2012 An Isogeometric Design-through-analysis Methodology based on Adaptive Hierarchical Refinement of NURBS , Immersed...M.J. Borden, E. Rank, T.J.R. Hughes, An Isogeometric Design-through-analysis Methodology based on Adaptive Hierarchical Refinement of NURBS , Immersed...analysis Methodology based on Adaptive Hierarchical Refinement of NURBS , Immersed Boundary Methods, and T-spline CAD Surfaces 5a. CONTRACT NUMBER 5b

  6. The Hierarchical Factor Model of ADHD: Invariant across Age and National Groupings?

    Science.gov (United States)

    Toplak, Maggie E.; Sorge, Geoff B.; Flora, David B.; Chen, Wai; Banaschewski, Tobias; Buitelaar, Jan; Ebstein, Richard; Eisenberg, Jacques; Franke, Barbara; Gill, Michael; Miranda, Ana; Oades, Robert D.; Roeyers, Herbert; Rothenberger, Aribert; Sergeant, Joseph; Sonuga-Barke, Edmund; Steinhausen, Hans-Christoph; Thompson, Margaret; Tannock, Rosemary; Asherson, Philip; Faraone, Stephen V.

    2012-01-01

    Objective: To examine the factor structure of attention-deficit/hyperactivity disorder (ADHD) in a clinical sample of 1,373 children and adolescents with ADHD and their 1,772 unselected siblings recruited from different countries across a large age range. Hierarchical and correlated factor analytic models were compared separately in the ADHD and…

  7. Design of Hierarchically Cut Hinges for Highly Stretchable and Reconfigurable Metamaterials with Enhanced Strength.

    Science.gov (United States)

    Tang, Yichao; Lin, Gaojian; Han, Lin; Qiu, Songgang; Yang, Shu; Yin, Jie

    2015-11-25

    Applying hierarchical cuts to thin sheets of elastomer generates super-stretchable and reconfigurable metamaterials, exhibiting highly nonlinear stress-strain behaviors and tunable phononic bandgaps. The cut concept fails on brittle thin sheets due to severe stress concentration in the rotating hinges. By engineering the local hinge shapes and global hierarchical structure, cut-based reconfigurable metamaterials with largely enhanced strength are realized.

  8. EPA Holds National Sustainable Design Expo

    Science.gov (United States)

    WASHINGTON, DC - Environmental Protection Agency (EPA) Deputy Administrator Stan Meiburg will open the 11th Annual National Sustainable Design Expo Saturday morning in Alexandria, Va. The expo will host student teams from colleges and universities across t

  9. POLLUTION PREVENTION IN THE DESIGN OF CHEMICAL PROCESSES USING HIERARCHICAL DESIGN AND SIMULATION

    Science.gov (United States)

    The design of chemical processes is normally an interactive process of synthesis and analysis. When one also desires or needs to limit the amount of pollution generated by the process the difficulty of the task can increase substantially. In this work, we show how combining hier...

  10. Hierarchical Kinematic Modelling and Optimal Design of a Novel Hexapod Robot with Integrated Limb Mechanism

    Directory of Open Access Journals (Sweden)

    Guiyang Xin

    2015-09-01

    Full Text Available This paper presents a novel hexapod robot, hereafter named PH-Robot, with three degrees of freedom (3-DOF parallel leg mechanisms based on the concept of an integrated limb mechanism (ILM for the integration of legged locomotion and arm manipulation. The kinematic model plays an important role in the parametric optimal design and motion planning of robots. However, models of parallel mechanisms are often difficult to obtain because of the implicit relationship between the motions of actuated joints and the motion of a moving platform. In order to derive the kinematic equations of the proposed hexapod robot, an extended hierarchical kinematic modelling method is proposed. According to the kinematic model, the geometrical parameters of the leg are optimized utilizing a comprehensive objective function that considers both dexterity and payload. PH-Robot has distinct advantages in accuracy and load ability over a robot with serial leg mechanisms through the former's comparison of performance indices. The reachable workspace of the leg verifies its ability to walk and manipulate. The results of the trajectory tracking experiment demonstrate the correctness of the kinematic model of the hexapod robot.

  11. Scripps building designated as national historic landmark

    Science.gov (United States)

    The George H. Scripps Memorial Marine Laboratory in La Jolla, Calif., has been designated a national historic landmark by the U.S. Department of the Interior. Completed in 1910, the building is the oldest structure at the Scripps Institution of Oceanography of the University of California, San Diego, and is the oldest marine laboratory building in the western hemisphere.The laboratory, designed by notable San Diego architect Irving Gill, was designated San Diego National Landmark 119 and was listed in the National Register of Historic Places in 1977, the year it was scheduled to be demolished. (The building had been thought to be not sturdy enough to withstand earthquakes; a review of the original building plans showed that no major structural changes would be required to meet modern seismic safety standards. Demolition plans were canceled.)

  12. Development of design support tool using integrated hierarchical control chart (HCC) and IEC61131 for nuclear power plant control

    Energy Technology Data Exchange (ETDEWEB)

    Nasimi, E.; Gabbar, H.A. [Univ. of Ontario Inst. of Tech., Oshawa, Ontario (Canada)

    2009-07-01

    This paper proposes a new intelligent and highly automated Hierarchical Control Chart (HCC) and operations mapping solution for nuclear power plant operators that provides control system designers, developers and operators with a single view of all elements and systems across a power plant with the integrated interactive data access and information retrieval capabilities that enables a faster fault diagnostics as well aids in a more efficient decision making for the routine daily tasks. (author)

  13. A Quality Control Design for Validating Hierarchical Sequencing of Programed Instruction.

    Science.gov (United States)

    Tennyson, Robert D.; Boutwell, Richard C.

    A quality control model is proposed to facilitate development of effective instructional programs. The theories of R. M. Gagne and of M. D. Merrill provide the foundations for a theory of sequencing behavior into a hierarchical order in order to improve the learning potential of an instructional program. The initial step in the procedural model is…

  14. Aerodynamic design of the National Rotor Testbed.

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, Christopher Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    A new wind turbine blade has been designed for the National Rotor Testbed (NRT) project and for future experiments at the Scaled Wind Farm Technology (SWiFT) facility with a specific focus on scaled wakes. This report shows the aerodynamic design of new blades that can produce a wake that has similitude to utility scale blades despite the difference in size and location in the atmospheric boundary layer. Dimensionless quantities circulation, induction, thrust coefficient, and tip-speed-ratio were kept equal between rotor scales in region 2 of operation. The new NRT design matched the aerodynamic quantities of the most common wind turbine in the United States, the GE 1.5sle turbine with 37c model blades. The NRT blade design is presented along with its performance subject to the winds at SWiFT. The design requirements determined by the SWiFT experimental test campaign are shown to be met.

  15. Design and implementation of a real-time hierarchical parallel postprocessor for 100 keV electron beam lithography

    Energy Technology Data Exchange (ETDEWEB)

    Muray, L.P.; Anderson, E.H.; Boegli, V. [Ernest Orlando Lawrence Berkeley National Laboratory, M/S 2-400, Berkeley, California 94720 (United States)

    1997-11-01

    A farm of off-the-shelf microprocessors is evaluated for use as a real-time parallel postprocessing subsystem of the Lawrence Berkeley National Laboratory datapath, including backscatter proximity correction. The native data format is GDSII with embedded control. Data storage is fully hierarchical with no intermediate binary pattern data formats. Benchmarks of a four Pentium Pro{trademark} farm, after optimization, demonstrate compatibility with exposure rates of 25 MHz for 32{percent} area fill on a vector scan Gaussian beam e-beam tool. Scalability of the architecture is discussed in detail. {copyright} {ital 1997 American Vacuum Society.}

  16. Design + energy: results of a national student design competition

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    A national competition for students in schools of architecture was conducted during the Spring of 1980. The competition was the first of a series of competitions that emphasized the integration of architectural design and energy considerations in medium-scale building projects, and specifically applying passive solar design strategies and the appropriate use of brick masonry materials. Some 300 faculty members and over 2200 students representing 80 of the 92 US architecture schools participated in the program. A summary is presented of the program and the range of submissions grouped by problem types and general climatic region.

  17. Design Criteria for Hierarchical Exclusive Code with Parameter-Invariant Decision Regions for Wireless 2-Way Relay Channel

    Directory of Open Access Journals (Sweden)

    Tomas Uricar

    2010-01-01

    Full Text Available The unavoidable parametrization of the wireless link represents a major problem of the network-coded modulation synthesis in a 2-way relay channel. Composite (hierarchical codeword received at the relay is generally parametrized by the channel gain, forcing any processing on the relay to be dependent on channel parameters. In this paper, we introduce the codebook design criteria, which ensure that all permissible hierarchical codewords have decision regions invariant to the channel parameters (as seen by the relay. We utilize the criterion for parameter-invariant constellation space boundary to obtain the codebooks with channel parameter-invariant decision regions at the relay. Since the requirements on such codebooks are relatively strict, the construction of higher-order codebooks will require a slightly simplified design criteria. We will show that the construction algorithm based on these relaxed criteria provides a feasible way to the design of codebooks with arbitrary cardinality. The promising performance benefits of the example codebooks (compared to a classical linear modulation alphabets will be exemplified on the minimum distance analysis.

  18. A hierarchical spatial framework and database for the national river fish habitat condition assessment

    Science.gov (United States)

    Wang, L.; Infante, D.; Esselman, P.; Cooper, A.; Wu, D.; Taylor, W.; Beard, D.; Whelan, G.; Ostroff, A.

    2011-01-01

    Fisheries management programs, such as the National Fish Habitat Action Plan (NFHAP), urgently need a nationwide spatial framework and database for health assessment and policy development to protect and improve riverine systems. To meet this need, we developed a spatial framework and database using National Hydrography Dataset Plus (I-.100,000-scale); http://www.horizon-systems.com/nhdplus). This framework uses interconfluence river reaches and their local and network catchments as fundamental spatial river units and a series of ecological and political spatial descriptors as hierarchy structures to allow users to extract or analyze information at spatial scales that they define. This database consists of variables describing channel characteristics, network position/connectivity, climate, elevation, gradient, and size. It contains a series of catchment-natural and human-induced factors that are known to influence river characteristics. Our framework and database assembles all river reaches and their descriptors in one place for the first time for the conterminous United States. This framework and database provides users with the capability of adding data, conducting analyses, developing management scenarios and regulation, and tracking management progresses at a variety of spatial scales. This database provides the essential data needs for achieving the objectives of NFHAP and other management programs. The downloadable beta version database is available at http://ec2-184-73-40-15.compute-1.amazonaws.com/nfhap/main/.

  19. Design and evaluation of a hierarchical control architecture for an autonomous underwater vehicle

    Institute of Scientific and Technical Information of China (English)

    BIAN Xin-qian; QIN Zheng; YAN Zhe-ping

    2008-01-01

    This paper researches on a kind of control architecture for autonomous underwater vehicle (AUV). After describing the hybrid property of the AUV control system, we present the hierarchical AUV control architecture. The architecture is organized in three layers: mission layer, task layer and execution layer. State supervisor and task coordinator are two key modules handling discrete events, so we describe these two modules in detail. Finally, we carried out a series of tests to verify this architecture. The test results show that the AUV can perform autonomous missions effectively and safely. We can conclude the control architecture is valid and practical.

  20. Hierarchical zeolites: Enhanced utilisation of microporous crystals in catalysis by advances in materials design

    DEFF Research Database (Denmark)

    Perez-Ramirez, Javier; Christensen, Claus H.; Egeblad, Kresten

    2008-01-01

    in these materials often imposes intracrystalline diffusion limitations, rendering low utilisation of the zeolite active volume in catalysed reactions. This critical review examines recent advances in the rapidly evolving area of zeolites with improved accessibility and molecular transport. Strategies to enhance...... the properties of the resulting materials and the catalytic function. We particularly dwell on the exciting field of hierarchical zeolites, which couple in a single material the catalytic power of micropores and the facilitated access and improved transport consequence of a complementary mesopore network...

  1. On Energy Efficient Hierarchical Cross-Layer Design: Joint Power Control and Routing for Ad Hoc Networks

    CERN Document Server

    Comaniciu, Cristina

    2007-01-01

    In this paper, a hierarchical cross-layer design approach is proposed to increase energy efficiency in ad hoc networks through joint adaptation of nodes' transmitting powers and route selection. The design maintains the advantages of the classic OSI model, while accounting for the cross-coupling between layers, through information sharing. The proposed joint power control and routing algorithm is shown to increase significantly the overall energy efficiency of the network, at the expense of a moderate increase in complexity. Performance enhancement of the joint design using multiuser detection is also investigated, and it is shown that the use of multiuser detection can increase the capacity of the ad hoc network significantly for a given level of energy consumption.

  2. Hierarchical hybrid control network design based on LON and master-slave RS-422/485 protocol

    Institute of Scientific and Technical Information of China (English)

    彭可; 陈际达; 陈岚

    2002-01-01

    Aiming at the weaknesses of LON bus, combining the coexistence of fieldbus and DCS (Distribu-ted Control Systems) in control networks, the authors introduce a hierarchical hybrid control network design based on LON and master-slave RS-422/485 protocol. This design adopts LON as the trunk, master-slave RS-422/485 control networks are connected to LON as special subnets by dedicated gateways. It is an implementation method for isomerous control network integration. Data management is ranked according to real-time requirements for different network data. The core components, such as control network nodes, router and gateway, are detailed in the paper. The design utilizes both communication advantage of LonWorks technology and the more powerful control ability of universal MCUs or PLCs, thus it greatly increases system response speed and performance-cost ratio.

  3. On Energy-Efficient Hierarchical Cross-Layer Design: Joint Power Control and Routing for Ad Hoc Networks

    Directory of Open Access Journals (Sweden)

    Poor HVincent

    2007-01-01

    Full Text Available A hierarchical cross-layer design approach is proposed to increase energy efficiency in ad hoc networks through joint adaptation of nodes' transmitting powers and route selection. The design maintains the advantages of the classic OSI model, while accounting for the cross-coupling between layers, through information sharing. The proposed joint power control and routing algorithm is shown to increase significantly the overall energy efficiency of the network, at the expense of a moderate increase in complexity. Performance enhancement of the joint design using multiuser detection is also investigated, and it is shown that the use of multiuser detection can increase the capacity of the ad hoc network significantly for a given level of energy consumption.

  4. National Ignition Facility design, performance, and cost

    Energy Technology Data Exchange (ETDEWEB)

    Hogan, W.J.; Paisner, J.A.; Lowdermilk, W.H. [and others

    1994-09-16

    A conceptual design for the National Ignition Facility (NIF) has been completed and its cost has been estimated by a multilaboratory team. To maximize the performance/cost ratio a compact, segmented amplifier is used in a multipass architecture. Many recent optical and laser technology developments have been incorporated into the final design. The Beamlet project has successfully demonstrated the new concept. The mission of ICF Program using the NEF is to achieve ignition and gain in the laboratory. The facility will be used for defense applications such as weapons physics and weapons effects experiments, and for civilian applications such as inertial fusion energy development and fundamental studies of matter at high energy density.

  5. The porous carbon derived from water hyacinth with well-designed hierarchical structure for supercapacitors

    Science.gov (United States)

    Zheng, Kaiwen; Li, Yuanyuan; Zhu, Ming; Yu, Xi; Zhang, Mengyan; Shi, Ling; Cheng, Jue

    2017-10-01

    A hierarchical porous water hyacinth-derived carbon (WHC) is fabricated by pre-carbonization and KOH activation for supercapacitors. The physicochemical properties of WHC are researched by scanning electron microscopy (SEM), N2 adsorption-desorption measurements, X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). The results indicate that WHC exhibits hierarchical porous structure and high specific surface area of 2276 m2/g. And the electrochemical properties of WHC are studied by cyclic voltammetry (CV), galvanostatic charge-discharge and electrochemical impedance spectroscopy (EIS) tests. In a three-electrode test system, WHC shows considerable specific capacitance of 344.9 F/g at a current density of 0.5 A/g, good rate performance with 225.8 F/g even at a current density of 30 A/g, and good cycle stability with 95% of the capacitance retention after 10000 cycles of charge-discharge at a current density of 5 A/g. Moreover, WHC cell delivers an energy density of 23.8 Wh/kg at 0.5 A/g and a power density of 15.7 kW/kg at 10 A/g. Thus, using water hyacinth as carbon source to fabricate supercapacitors electrodes is a promising approach for developing inexpensive, sustainable and high-performance carbon materials. Additionally, this study supports the sustainable development and the control of biological invasion.

  6. HIERARCHICAL DESIGN BASED INTRUSION DETECTION SYSTEM FOR WIRELESS AD HOC SENSOR NETWORK

    Directory of Open Access Journals (Sweden)

    Mohammad Saiful Islam Mamun

    2010-07-01

    Full Text Available In recent years, wireless ad hoc sensor network becomes popular both in civil and military jobs.However, security is one of the significant challenges for sensor network because of their deploymentin open and unprotected environment. As cryptographic mechanism is not enough to protect sensornetwork from external attacks, intrusion detection system needs to be introduced. Though intrusionprevention mechanism is one of the major and efficient methods against attacks, but there might besome attacks for which prevention method is not known. Besides preventing the system from someknown attacks, intrusion detection system gather necessary information related to attack technique andhelp in the development of intrusion prevention system. In addition to reviewing the present attacksavailable in wireless sensor network this paper examines the current efforts to intrusion detectionsystem against wireless sensor network. In this paper we propose a hierarchical architectural designbased intrusion detection system that fits the current demands and restrictions of wireless ad hocsensor network. In this proposed intrusion detection system architecture we followed clusteringmechanism to build a four level hierarchical network which enhances network scalability to largegeographical area and use both anomaly and misuse detection techniques for intrusion detection. Weintroduce policy based detection mechanism as well as intrusion response together with GSM cellconcept for intrusion detection architecture.

  7. Using Hierarchical Adaptive Neuro Fuzzy Systems And Design Two New Edge Detectors In Noisy Images

    Directory of Open Access Journals (Sweden)

    M. H. Olyaee

    2013-10-01

    Full Text Available One of the most important topics in image processing is edge detection. Many methods have been proposed for this end but most of them have weak performance in noisy images because noise pixels are determined as edge. In this paper, two new methods are represented based on Hierarchical Adaptive Neuro Fuzzy Systems (HANFIS. Each method consists of desired number of HANFIS operators that receive the value of some neighbouring pixels and decide central pixel is edge or not. Simple train images are used in order to set internal parameters of each HANFIS operator. The presented methods are evaluated by some test images and compared with several popular edge detectors. The experimental results show that these methods are robust against impulse noise and extract edge pixels exactly.

  8. Hierarchical Pathfinding and AI-Based Learning Approach in Strategy Game Design

    Directory of Open Access Journals (Sweden)

    Le Minh Duc

    2008-01-01

    Full Text Available Strategy game and simulation application are an exciting area with many opportunities for study and research. Currently most of the existing games and simulations apply hard coded rules so the intelligence of the computer generated forces is limited. After some time, player gets used to the simulation making it less attractive and challenging. It is also costly and tedious to incorporate new rules for an existing game. The main motivation behind this research project is to improve the quality of artificial intelligence- (AI- based on various techniques such as qualitative spatial reasoning (Forbus et al., 2002, near-optimal hierarchical pathfinding (HPA* (Botea et al., 2004, and reinforcement learning (RL (Sutton and Barto, 1998.

  9. Design of the National Bioforensics Library Infrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Slezak, T; Critchlow, T; Hazlett, S; Samatova, N; Chandramohan, P; Krishnamurthy, R

    2004-02-02

    This design document is the first concrete step in developing a national resource for Bioforensics, the ''Bioforensics Information Encyclopedia''. This resource will contain a semantically consistent representation of all the information relevant to the nation's bio-defense efforts. The availability of such a resource will provide analysts and scientists with efficient, timely access to the information needed to accomplish such tasks as locating relevant experts, determining an optimal order of appropriate forensic tests, and comparing the ''signature'' of the current attack to previous ones. Much of the information required for this repository is scattered across multiple institutions in differing formats and is either currently being generated or is proposed as part of new research efforts. Without effective integration and curation, the data is of limited availability and use. This resource would be utilized by several government agencies to prepare for, investigate, analyze, and respond to bio-terrorist events. In particular, NBACC requires a highly advanced knowledge base of this nature to perform its unique role for the Department of Homeland Security (DHS). Under our current execution plan, an implementation of the design provided in this document will be demonstrated in a limited functionality prototype that can be deployed at NBACC-West (LLNL). This prototype will provide analysts with access to semantically consistent data from multiple data sources through a single, web-based interface. This interface will support a limited number of queries against an underlying data warehouse. The prototype data warehouse will include information from at least three of the scientific domains relevant to Bioforensics (e.g. genomics, pathogen signature, disease symptoms, chemical/toxicity). While the purpose of this document is to provide a design for the entire infrastructure, we identify those aspects of the infrastructure

  10. Design of the National Bioforensics Library Infrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Slezak, T; Critchlow, T; Hazlett, S; Samatova, N; Chandramohan, P; Krishnamurthy, R

    2004-02-02

    This design document is the first concrete step in developing a national resource for Bioforensics, the ''Bioforensics Information Encyclopedia''. This resource will contain a semantically consistent representation of all the information relevant to the nation's bio-defense efforts. The availability of such a resource will provide analysts and scientists with efficient, timely access to the information needed to accomplish such tasks as locating relevant experts, determining an optimal order of appropriate forensic tests, and comparing the ''signature'' of the current attack to previous ones. Much of the information required for this repository is scattered across multiple institutions in differing formats and is either currently being generated or is proposed as part of new research efforts. Without effective integration and curation, the data is of limited availability and use. This resource would be utilized by several government agencies to prepare for, investigate, analyze, and respond to bio-terrorist events. In particular, NBACC requires a highly advanced knowledge base of this nature to perform its unique role for the Department of Homeland Security (DHS). Under our current execution plan, an implementation of the design provided in this document will be demonstrated in a limited functionality prototype that can be deployed at NBACC-West (LLNL). This prototype will provide analysts with access to semantically consistent data from multiple data sources through a single, web-based interface. This interface will support a limited number of queries against an underlying data warehouse. The prototype data warehouse will include information from at least three of the scientific domains relevant to Bioforensics (e.g. genomics, pathogen signature, disease symptoms, chemical/toxicity). While the purpose of this document is to provide a design for the entire infrastructure, we identify those aspects of the infrastructure

  11. Hierarchically structured superhydrophobic flowers with low hysteresis of the wild pansy (Viola tricolor – new design principles for biomimetic materials

    Directory of Open Access Journals (Sweden)

    Anna J. Schulte

    2011-05-01

    Full Text Available Hierarchically structured flower leaves (petals of many plants are superhydrophobic, but water droplets do not roll-off when the surfaces are tilted. On such surfaces water droplets are in the “Cassie impregnating wetting state”, which is also known as the “petal effect”. By analyzing the petal surfaces of different species, we discovered interesting new wetting characteristics of the surface of the flower of the wild pansy (Viola tricolor. This surface is superhydrophobic with a static contact angle of 169° and very low hysteresis, i.e., the petal effect does not exist and water droplets roll-off as from a lotus (Nelumbo nucifera leaf. However, the surface of the wild pansy petal does not possess the wax crystals of the lotus leaf. Its petals exhibit high cone-shaped cells (average size 40 µm with a high aspect ratio (2.1 and a very fine cuticular folding (width 260 nm on top. The applied water droplets are in the Cassie–Baxter wetting state and roll-off at inclination angles below 5°. Fabricated hydrophobic polymer replicas of the wild pansy were prepared in an easy two-step moulding process and possess the same wetting characteristics as the original flowers. In this work we present a technical surface with a new superhydrophobic, low adhesive surface design, which combines the hierarchical structuring of petals with a wetting behavior similar to that of the lotus leaf.

  12. Point-Mass Aircraft Trajectory Prediction Using a Hierarchical, Highly-Adaptable Software Design

    Science.gov (United States)

    Karr, David A.; Vivona, Robert A.; Woods, Sharon E.; Wing, David J.

    2017-01-01

    A highly adaptable and extensible method for predicting four-dimensional trajectories of civil aircraft has been developed. This method, Behavior-Based Trajectory Prediction, is based on taxonomic concepts developed for the description and comparison of trajectory prediction software. A hierarchical approach to the "behavioral" layer of a point-mass model of aircraft flight, a clear separation between the "behavioral" and "mathematical" layers of the model, and an abstraction of the methods of integrating differential equations in the "mathematical" layer have been demonstrated to support aircraft models of different types (in particular, turbojet vs. turboprop aircraft) using performance models at different levels of detail and in different formats, and promise to be easily extensible to other aircraft types and sources of data. The resulting trajectories predict location, altitude, lateral and vertical speeds, and fuel consumption along the flight path of the subject aircraft accurately and quickly, accounting for local conditions of wind and outside air temperature. The Behavior-Based Trajectory Prediction concept was implemented in NASA's Traffic Aware Planner (TAP) flight-optimizing cockpit software application.

  13. Design of IP Camera Access Control Protocol by Utilizing Hierarchical Group Key

    Directory of Open Access Journals (Sweden)

    Jungho Kang

    2015-08-01

    Full Text Available Unlike CCTV, security video surveillance devices, which we have generally known about, IP cameras which are connected to a network either with or without wire, provide monitoring services through a built-in web-server. Due to the fact that IP cameras can use a network such as the Internet, multiple IP cameras can be installed at a long distance and each IP camera can utilize the function of a web server individually. Even though IP cameras have this kind of advantage, it has difficulties in access control management and weakness in user certification, too. Particularly, because the market of IP cameras did not begin to be realized a long while ago, systems which are systematized from the perspective of security have not been built up yet. Additionally, it contains severe weaknesses in terms of access authority to the IP camera web server, certification of users, and certification of IP cameras which are newly installed within a network, etc. This research grouped IP cameras hierarchically to manage them systematically, and provided access control and data confidentiality between groups by utilizing group keys. In addition, IP cameras and users are certified by using PKI-based certification, and weak points of security such as confidentiality and integrity, etc., are improved by encrypting passwords. Thus, this research presents specific protocols of the entire process and proved through experiments that this method can be actually applied.

  14. Hierarchically designed three-dimensional macro/mesoporous carbon frameworks for advanced electrochemical capacitance storage.

    Science.gov (United States)

    Yang, Yanbing; Li, Peixu; Wu, Shiting; Li, Xinyang; Shi, Enzheng; Shen, Qicang; Wu, Dehai; Xu, Wenjing; Cao, Anyuan; Yuan, Quan

    2015-04-13

    Mesoporous carbon (m-C) has potential applications as porous electrodes for electrochemical energy storage, but its applications have been severely limited by the inherent fragility and low electrical conductivity. A rational strategy is presented to construct m-C into hierarchical porous structures with high flexibility by using a carbon nanotube (CNT) sponge as a three-dimensional template, and grafting Pt nanoparticles at the m-C surface. This method involves several controllable steps including solution deposition of a mesoporous silica (m-SiO2 ) layer onto CNTs, chemical vapor deposition of acetylene, and etching of m-SiO2 , resulting in a CNT@m-C core-shell or a CNT@m-C@Pt core-shell hybrid structure after Pt adsorption. The underlying CNT network provides a robust yet flexible support and a high electrical conductivity, whereas the m-C provides large surface area, and the Pt nanoparticles improves interfacial electron and ion diffusion. Consequently, specific capacitances of 203 and 311 F g(-1) have been achieved in these CNT@m-C and CNT@m-C@Pt sponges as supercapacitor electrodes, respectively, which can retain 96 % of original capacitance under large degree compression.

  15. 36 CFR 65.5 - Designation of National Historic Landmarks.

    Science.gov (United States)

    2010-07-01

    ... program have been met. A simple majority is required to make a recommendation of designation. The Board's... OF THE INTERIOR NATIONAL HISTORIC LANDMARKS PROGRAM § 65.5 Designation of National Historic Landmarks... sources other than the regularly programmed funds of the National Historic Landmarks Program. (b) Special...

  16. Using light to guide the motion of nanorods in photoresponsive binary blends: designing hierarchically structured nanocomposites.

    Science.gov (United States)

    Liu, Ya; Kuksenok, Olga; Balazs, Anna C

    2013-10-15

    One of the challenges in creating high-performance polymer nanocomposites is establishing effective routes for tailoring the morphology of both the polymer mixture and the dispersed nanoparticles, which contribute desirable optical, electrical, and mechanical properties. Using computational modeling, we devise an effective method for simultaneously controlling the spatial regularity of the polymer phases and the distribution of the rods within this matrix. We focus on mixtures of photosensitive AB binary blends and A-coated nanorods; in the presence of light, the binary blends undergo a reversible chemical reaction and phase separation to yield a morphology resembling that of microphase-separated diblock copolymers. We simulate the effects of illuminating this sample with a uniform background light and a higher intensity, spatially localized light, which is rastered over the sample with a velocity v. The resulting material displays a periodically ordered, essentially defect-free morphology, with the A-like nanoparticles localized in lamellar A domains. The dynamic behavior of the rods within this system can be controlled by varying the velocity v and Γ2, the reaction rate coefficient produced by the higher intensity light. Specifically, the rastering light can drive the rods to be "pushed" along the lamellar domains or oriented perpendicular to these stripes. Given these attributes, we isolate scenarios where the system encompasses a complex hierarchical structure, with rods that are simultaneously ordered along two distinct directions within the periodic matrix. Namely, the rods form long nanowires that span the length of the sample and lie perpendicular to these wires in regularly spaced A lamellae. Hence, our approach points to new routes for producing self-organized rectangular grids, which can impart remarkable optoelectronic or mechanical properties to the materials.

  17. A hierarchical method for structural topology design problems with local stress and displacement constraints

    DEFF Research Database (Denmark)

    Stolpe, Mathias; Stidsen, Thomas K.

    2005-01-01

    of minimizing the weight of a structure subject to displacement and local design-dependent stress constraints. The method iteratively solves a sequence of problems of increasing size of the same type as the original problem. The problems are defined on a design mesh which is initially coarse...... from global optimization, which have only recently become available, for solving the problems in the sequence. Numerical examples of topology design problems of continuum structures with local stress and displacement constraints are presented....

  18. A hierarchical method for discrete structural topology design problems with local stress and displacement constraints

    DEFF Research Database (Denmark)

    Stolpe, Mathias; Stidsen, Thomas K.

    2007-01-01

    of minimizing the weight of a structure subject to displacement and local design-dependent stress constraints. The method iteratively treats a sequence of problems of increasing size of the same type as the original problem. The problems are defined on a design mesh which is initially coarse...... from global optimization, which have only recently become available, for solving the problems in the sequence. Numerical examples of topology design problems of continuum structures with local stress and displacement constraints are presented....

  19. Designated Overlook Areas at Cedar Breaks National Monument, Utah (ovrareas)

    Data.gov (United States)

    National Park Service, Department of the Interior — This coverage contains three polygons that represent areas of designated overlooks at Cedar Breaks National Monument. Note: Point Supreme needs an FMSS number - it...

  20. Hierarchical Linear Modeling Meta-Analysis of Single-Subject Design Research

    Science.gov (United States)

    Gage, Nicholas A.; Lewis, Timothy J.

    2014-01-01

    The identification of evidence-based practices continues to provoke issues of disagreement across multiple fields. One area of contention is the role of single-subject design (SSD) research in providing scientific evidence. The debate about SSD's utility centers on three issues: sample size, effect size, and serial dependence. One potential…

  1. Hierarchical auxetic mechanical metamaterials.

    Science.gov (United States)

    Gatt, Ruben; Mizzi, Luke; Azzopardi, Joseph I; Azzopardi, Keith M; Attard, Daphne; Casha, Aaron; Briffa, Joseph; Grima, Joseph N

    2015-02-11

    Auxetic mechanical metamaterials are engineered systems that exhibit the unusual macroscopic property of a negative Poisson's ratio due to sub-unit structure rather than chemical composition. Although their unique behaviour makes them superior to conventional materials in many practical applications, they are limited in availability. Here, we propose a new class of hierarchical auxetics based on the rotating rigid units mechanism. These systems retain the enhanced properties from having a negative Poisson's ratio with the added benefits of being a hierarchical system. Using simulations on typical hierarchical multi-level rotating squares, we show that, through design, one can control the extent of auxeticity, degree of aperture and size of the different pores in the system. This makes the system more versatile than similar non-hierarchical ones, making them promising candidates for industrial and biomedical applications, such as stents and skin grafts.

  2. Hierarchical Auxetic Mechanical Metamaterials

    Science.gov (United States)

    Gatt, Ruben; Mizzi, Luke; Azzopardi, Joseph I.; Azzopardi, Keith M.; Attard, Daphne; Casha, Aaron; Briffa, Joseph; Grima, Joseph N.

    2015-02-01

    Auxetic mechanical metamaterials are engineered systems that exhibit the unusual macroscopic property of a negative Poisson's ratio due to sub-unit structure rather than chemical composition. Although their unique behaviour makes them superior to conventional materials in many practical applications, they are limited in availability. Here, we propose a new class of hierarchical auxetics based on the rotating rigid units mechanism. These systems retain the enhanced properties from having a negative Poisson's ratio with the added benefits of being a hierarchical system. Using simulations on typical hierarchical multi-level rotating squares, we show that, through design, one can control the extent of auxeticity, degree of aperture and size of the different pores in the system. This makes the system more versatile than similar non-hierarchical ones, making them promising candidates for industrial and biomedical applications, such as stents and skin grafts.

  3. Multi-Scale Hierarchical and Topological Design of Structures for Failure Resistance

    Science.gov (United States)

    2013-10-04

    Molecular mechanics of mineralized collagen fibrils in bone, Nature Communications, (04 2013): 0. doi: 10.1038/ncomms2720 TOTAL: 14 (b) Papers published in...multiscale modeling and applications of collagen materials – MURI project funded (start date end of 2009), focused on the design of disruptive fibers...and mats of carbon nanotubes – Keynote/plenary speaker at many conferences and workshops, enabled outreach to academic and technical community

  4. DNA-inspired hierarchical polymer design: electrostatics and hydrogen bonding in concert.

    Science.gov (United States)

    Hemp, Sean T; Long, Timothy E

    2012-01-01

    Nucleic acids and proteins, two of nature's biopolymers, assemble into complex structures to achieve desired biological functions and inspire the design of synthetic macromolecules containing a wide variety of noncovalent interactions including electrostatics and hydrogen bonding. Researchers have incorporated DNA nucleobases into a wide variety of synthetic monomers/polymers achieving stimuli-responsive materials, supramolecular assemblies, and well-controlled macromolecules. Recently, scientists utilized both electrostatics and complementary hydrogen bonding to orthogonally functionalize a polymer backbone through supramolecular assembly. Diverse macromolecules with noncovalent interactions will create materials with properties necessary for biomedical applications.

  5. Research on Flexible Transfer Line Schematic Design Using Hierarchical Process Planning

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Flexible transfer line(FTL)is now widely used in ma ny manufacturing domains to realize efficiently,high quantity and economic prod uction.These manufacturing domains include automobile,tractor,internal-combu stion engine,and so on.In today's competitive business environment,it is vit ally important for machine tool manufacturers to design flexible transfer line m ore effectively and efficiently according to a wider variety of customer demand s.This paper proposes an approach to a bidding-based flexible tra...

  6. 3D hierarchically patterned tubular NiSe with nano-/microstructures for Li ion battery design.

    Science.gov (United States)

    Mi, Liwei; Sun, Hui; Ding, Qi; Chen, Weihua; Liu, Chuntai; Hou, Hongwei; Zheng, Zhi; Shen, Changyu

    2012-10-28

    Tubular nickel selenide (NiSe) crystals with hierarchical structures were successfully fabricated using a one-step solvothermal method in moderate conditions, in which ethylenediamine and ethylene glycol were used as the mixed solvent. The growth of hierarchical NiSe microtubes from NiSe microflakes was achieved without surfactants or other chemical additives by changing the reaction time. When the as-synthesized NiSe microtubes were employed as cathode materials for lithium-ion batteries, the initial discharge capacity of hierarchical NiSe microtubes reached 410.7 mAh g(-1).

  7. Hierarchically Nanoporous Bioactive Glasses for High Efficiency Immobilization of Enzymes

    DEFF Research Database (Denmark)

    He, W.; Min, D.D.; Zhang, X.D.

    2014-01-01

    Bioactive glasses with hierarchical nanoporosity and structures have been heavily involved in immobilization of enzymes. Because of meticulous design and ingenious hierarchical nanostructuration of porosities from yeast cell biotemplates, hierarchically nanostructured porous bioactive glasses can...

  8. National Ignition Facility Target Design and Fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Cook, R C; Kozioziemski, B J; Nikroo, A; Wilkens, H L; Bhandarkar, S; Forsman, A C; Haan, S W; Hoppe, M L; Huang, H; Mapoles, E; Moody, J D; Sater, J D; Seugling, R M; Stephens, R B; Takagi, M; Xu, H W

    2007-12-10

    The current capsule target design for the first ignition experiments at the NIF Facility beginning in 2009 will be a copper-doped beryllium capsule, roughly 2 mm in diameter with 160-{micro}m walls. The capsule will have a 75-{micro}m layer of solid DT on the inside surface, and the capsule will driven with x-rays generated from a gold/uranium cocktail hohlraum. The design specifications are extremely rigorous, particularly with respect to interfaces, which must be very smooth to inhibit Rayleigh-Taylor instability growth. This paper outlines the current design, and focuses on the challenges and advances in capsule fabrication and characterization; hohlraum fabrication, and D-T layering and characterization.

  9. No wilderness designation announcement [Laguna Atascosa National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a brief announcement stating that wilderness designation will not be recommended for any portion of the Laguna Atascosa National Wildlife Refuge....

  10. Plastic ablator ignition capsule design for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Clark, D S; Haan, S W; Hammel, B A; Salmonson, J D; Callahan, D A; Town, R P

    2009-12-01

    The National Ignition Campaign, tasked with designing and fielding targets for fusion ignition experiments on the National Ignition Facility (NIF), has carried forward three complementary target designs for the past several years: a beryllium ablator design, a plastic ablator design, and a high-density carbon or synthetic diamond design. This paper describes current simulations and design optimization to develop the plastic ablator capsule design as a candidate for the first ignition attempt on NIF. The trade-offs in capsule scale and laser energy that must be made to achieve a comparable ignition probability to that with beryllium are emphasized. Large numbers of 1-D simulations, meant to assess the statistical behavior of the target design, as well as 2-D simulations to assess the target's susceptibility to Rayleigh-Taylor growth are presented.

  11. Hierarchical Porous Structures

    Energy Technology Data Exchange (ETDEWEB)

    Grote, Christopher John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-06-07

    Materials Design is often at the forefront of technological innovation. While there has always been a push to generate increasingly low density materials, such as aero or hydrogels, more recently the idea of bicontinuous structures has gone more into play. This review will cover some of the methods and applications for generating both porous, and hierarchically porous structures.

  12. Hierarchical Neural Network (HNN) for Closed Loop Decision Making: Designing the Architecture of a Hierarchical Neural Network to Model Attention, Learning and Goal Oriented Behavior

    Science.gov (United States)

    1990-12-01

    equation (2. 1). define the virtual reference trajectory Iqr qd -A J e dt (3.1) 3 where qd is an n xl vector of dezired joint coordinates. e = q - qd, and...asymptotic stability is guaranteed despite the highly nonlinear define the virtual reference trajectory q, q, ’q, and the virtual nature of the...designate ’!-e !u,:red trajectory. Following [4] define the virtual reference trajectory 4r, qr, and the virtual ’.-:!--,.:vory velocity error 6rIr = d

  13. Molecular-Level Design of Hierarchically Porous Carbons Codoped with Nitrogen and Phosphorus Capable of In Situ Self-Activation for Sustainable Energy Systems.

    Science.gov (United States)

    Ai, Wei; Wang, Xuewan; Zou, Chenji; Du, Zhuzhu; Fan, Zhanxi; Zhang, Hua; Chen, Peng; Yu, Ting; Huang, Wei

    2017-02-01

    Hierarchically porous carbons are attracting tremendous attention in sustainable energy systems, such as lithium ion battery (LIB) and fuel cell, due to their excellent transport properties that arise from the high surface area and rich porosity. The state-of-the-art approaches for synthesizing hierarchically porous carbons normally require chemical- and/or template-assisted activation techniques, which is complicate, time consuming, and not feasible for large scale production. Here, a molecular-level design principle toward large-scale synthesis of nitrogen and phosphorus codoped hierarchically porous carbon (NPHPC) through an in situ self-activation process is proposed. The material is fabricated based on the direct pyrolysis of a well-designed polymer, melamine polyphosphate, which is capable of in situ self-activation to generate large specific surface area (1479 m(2) g(-1) ) and hierarchical pores in the final NPHPC. As an anode material for LIB, NPHPC delivers a high reversible capacity of 1073 mAh g(-1) and an excellent cyclic stability for 300 cycles with negligible capacity decay. The peculiar structural properties and synergistic effect of N and P codopants also enable NPHPC a promising electrocatalyst for oxygen reduction reaction, a key cathodic reaction process of many energy conversion devices (for example, fuel cells and metal air batteries). Electrochemical measurements show NPHPC a comparable electrocatalytic performance to commercial Pt/C catalyst (onset potential of 0.88 V vs reversible hydrogen electrode in alkaline medium) with excellent stability (89.8% retention after 20 000 s continuous operation) and superior methanol tolerance. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Hierarchically porous carbon membranes containing designed nanochannel architectures obtained by pyrolysis of ion-track etched polyimide

    Energy Technology Data Exchange (ETDEWEB)

    Muench, Falk, E-mail: muench@ca.tu-darmstadt.de [Department of Material- and Geoscience, Technische Universität Darmstadt, Alarich-Weiss-Straße 2, 64287 Darmstadt (Germany); Seidl, Tim; Rauber, Markus [Department of Material- and Geoscience, Technische Universität Darmstadt, Alarich-Weiss-Straße 2, 64287 Darmstadt (Germany); Material Research Department, GSI Helmholtzzentrum für Schwerionenforschung GmbH, Planckstraße 1, 64291 Darmstadt (Germany); Peter, Benedikt; Brötz, Joachim [Department of Material- and Geoscience, Technische Universität Darmstadt, Alarich-Weiss-Straße 2, 64287 Darmstadt (Germany); Krause, Markus; Trautmann, Christina [Department of Material- and Geoscience, Technische Universität Darmstadt, Alarich-Weiss-Straße 2, 64287 Darmstadt (Germany); Material Research Department, GSI Helmholtzzentrum für Schwerionenforschung GmbH, Planckstraße 1, 64291 Darmstadt (Germany); Roth, Christina [Department of Chemistry and Biochemistry, Freie Universität Berlin, Takustraße 3, 14195 Berlin (Germany); Katusic, Stipan [Evonik Industries AG, Rodenbacher Chaussee 4, 63457 Hanau (Germany); Ensinger, Wolfgang [Department of Material- and Geoscience, Technische Universität Darmstadt, Alarich-Weiss-Straße 2, 64287 Darmstadt (Germany)

    2014-12-15

    Well-defined, porous carbon monoliths are highly promising materials for electrochemical applications, separation, purification and catalysis. In this work, we present an approach allowing to transfer the remarkable degree of synthetic control given by the ion-track etching technology to the fabrication of carbon membranes with porosity structured on multiple length scales. The carbonization and pore formation processes were examined with Raman, Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM) and X-ray diffraction (XRD) measurements, while model experiments demonstrated the viability of the carbon membranes as catalyst support and pollutant adsorbent. Using ion-track etching, specifically designed, continuous channel-shaped pores were introduced into polyimide foils with precise control over channel diameter, orientation, density and interconnection. At a pyrolysis temperature of 950 °C, the artificially created channels shrunk in size, but their shape was preserved, while the polymer was transformed to microporous, amorphous carbon. Channel diameters ranging from ∼10 to several 100 nm could be achieved. The channels also gave access to previously closed micropore volume. Substantial surface increase was realized, as it was shown by introducing a network consisting of 1.4 × 10{sup 10} channels per cm{sup 2} of 30 nm diameter, which more than tripled the mass-normalized surface of the pyrolytic carbon from 205 m{sup 2} g{sup −1} to 732 m{sup 2} g{sup −1}. At a pyrolysis temperature of 3000 °C, membranes consisting of highly ordered graphite were obtained. In this case, the channel shape was severely altered, resulting in a pronounced conical geometry in which the channel diameter quickly decreased with increasing distance to the membrane surface. - Highlights: • Pyrolysis of ion-track etched polyimide yields porous carbon membranes. • Hierarchic porosity: continuous nanochannels embedded in a microporous carbon matrix.

  15. Hierarchical materials: Background and perspectives

    DEFF Research Database (Denmark)

    2016-01-01

    Hierarchical design draws inspiration from analysis of biological materials and has opened new possibilities for enhancing performance and enabling new functionalities and extraordinary properties. With the development of nanotechnology, the necessary technological requirements for the manufactur...

  16. Optical Design Capabilities at Lawrence Livermore National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Lawson, J K

    2002-12-30

    Optical design capabilities continue to play the same strong role at Lawrence Livermore National Laboratory (LLNL) that they have played in the past. From defense applications to the solid-state laser programs to the Atomic Vapor Laser Isotope Separation (AVLIS), members of the optical design group played critical roles in producing effective system designs and are actively continuing this tradition. This talk will explain the role optical design plays at LLNL, outline current capabilities and summarize a few activities in which the optical design team has been recently participating.

  17. Ignition target design for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Haan, S.W.; Pollaine, S.M.; Lindl, J.D. [Los Alamos National Laboratory, NM (United States)] [and others

    1996-06-01

    The goal of inertial confinement fusion (ICF) is to produce significant thermonuclear burn from a target driven with a laser or ion beam. To achieve that goal, the national ICF Program has proposed a laser capable of producing ignition and intermediate gain. The facility is called the National Ignition Facility (NIF). This article describes ignition targets designed for the NIF and their modeling. Although the baseline NIF target design, described herein, is indirect drive, the facility will also be capable of doing direct-drive ignition targets - currently being developed at the University of Rochester.

  18. Conceptual design for the National Water Information System

    Science.gov (United States)

    Edwards, M.D.; Putnam, A.L.; Hutchison, N.E.

    1986-01-01

    The Water Resources Division of the U.S. Geological Survey began the design and development of a National Water Information System (NWIS) in 1983. The NWIS will replace and integrate the existing data systems of the National Water Data Storage and Retrieval System, National Water Data Exchange, National Water-Use Information Program, and Water Resources Scientific Information Center. The NWIS has been designed as an interactive , distributed data system. The software system has been designed in a modular manner which integrates existing software functions and allows multiple use of software modules. The data of the existing water data, water use data, and water data indexing information by using a common relational data base management system. The NWIS will be operated on microcomputers located in each of the Water Resources Division 's District offices and many of its state, subdistrict, and field offices. The microcomputers will be linked together through a national telecommunication network maintained by the U.S. Geological Survey. The NWIS is scheduled to be placed in operation in 1990. (Author 's abstract)

  19. National Design and Multinational Integration of Balancing Services Markets

    NARCIS (Netherlands)

    Abbasy, A.

    2012-01-01

    The “balancing market” in the liberalized electricity sector of today is the tool in the hands of the system operator to balance generation and consumption in the grid and ensure system security. This dissertation addresses market design issues of balancing services markets from a national perspecti

  20. HDS: Hierarchical Data System

    Science.gov (United States)

    Pearce, Dave; Walter, Anton; Lupton, W. F.; Warren-Smith, Rodney F.; Lawden, Mike; McIlwrath, Brian; Peden, J. C. M.; Jenness, Tim; Draper, Peter W.

    2015-02-01

    The Hierarchical Data System (HDS) is a file-based hierarchical data system designed for the storage of a wide variety of information. It is particularly suited to the storage of large multi-dimensional arrays (with their ancillary data) where efficient access is needed. It is a key component of the Starlink software collection (ascl:1110.012) and is used by the Starlink N-Dimensional Data Format (NDF) library (ascl:1411.023). HDS organizes data into hierarchies, broadly similar to the directory structure of a hierarchical filing system, but contained within a single HDS container file. The structures stored in these files are self-describing and flexible; HDS supports modification and extension of structures previously created, as well as functions such as deletion, copying, and renaming. All information stored in HDS files is portable between the machines on which HDS is implemented. Thus, there are no format conversion problems when moving between machines. HDS can write files in a private binary format (version 4), or be layered on top of HDF5 (version 5).

  1. 32 CFR 553.7 - Design and layout of Army national cemeteries.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Design and layout of Army national cemeteries... RESERVATIONS AND NATIONAL CEMETERIES ARMY NATIONAL CEMETERIES § 553.7 Design and layout of Army national cemeteries. (a) General cemetery layout plans, landscape planting plans and gravesite layout plans for...

  2. On the Optimization of the Hierarchical Structure in National Governance System%论国家治理体系的层级结构优化

    Institute of Scientific and Technical Information of China (English)

    桑玉成; 鄢波

    2014-01-01

    T he main problem of the hierarchical structure in national governance system is that there is a lack of norms in relationship between central and local governments ;the authority allocation and function definition in vertical level is vague , forming “isomorphic responsibility" governmental system .The phenomenon of isomorphic responsibilities is related to the constitutional law and resource allocation . There is a separate structure between governance organization from top to bottom and expression of the social interests from bottom to top .In order to improve the governance system ,it is necessary to distinguish the boundary among state market and society ,and allocate reasonably the functions and resources among different levels of the government .%当前我国国家治理层级结构中存在的问题主要是央地关系缺乏制度化规范,纵向层级间的权力配置和职能界定模糊不清,上下形成职责同构。职责同构现象同宪法法律规定和资源分配现状有关。自上而下的同构组织与自下而上的社会利益表达存在结构性分离。要完善治理体系,需要将国家与市场、社会边界进行区分,并在不同政府层级间合理配置职权和治理资源。

  3. Optimization of the National Ignition Facility primary shield design

    Energy Technology Data Exchange (ETDEWEB)

    Annese, C.E.; Watkins, E.F.; Greenspan, E.; Miller, W.F. [California Univ., Berkeley, CA (United States). Dept. of Nuclear Engineering; Latkowski, J.; Lee, J.D.; Soran, P.; Tobin, M.L. [Lawrence Livermore National Lab., CA (United States)

    1993-10-01

    Minimum cost design concepts of the primary shield for the National Ignition laser fusion experimental Facility (NIF) are searched with the help of the optimization code SWAN. The computational method developed for this search involves incorporating the time dependence of the delayed photon field within effective delayed photon production cross sections. This method enables one to address the time-dependent problem using relatively simple, time-independent transport calculations, thus significantly simplifying the design process. A novel approach was used for the identification of the optimal combination of constituents that will minimize the shield cost; it involves the generation, with SWAN, of effectiveness functions for replacing materials on an equal cost basis. The minimum cost shield design concept was found to consist of a mixture of polyethylene and low cost, low activation materials such as SiC, with boron added near the shield boundaries.

  4. COF-Net on CNT-Net as a Molecularly Designed, Hierarchical Porous Chemical Trap for Polysulfides in Lithium-Sulfur Batteries.

    Science.gov (United States)

    Yoo, JongTae; Cho, Sung-Ju; Jung, Gwan Yeong; Kim, Su Hwan; Choi, Keun-Ho; Kim, Jeong-Hoon; Lee, Chang Kee; Kwak, Sang Kyu; Lee, Sang-Young

    2016-05-11

    The hierarchical porous structure has garnered considerable attention as a multiscale engineering strategy to bring unforeseen synergistic effects in a vast variety of functional materials. Here, we demonstrate a "microporous covalent organic framework (COF) net on mesoporous carbon nanotube (CNT) net" hybrid architecture as a new class of molecularly designed, hierarchical porous chemical trap for lithium polysulfides (Li2Sx) in Li-S batteries. As a proof of concept for the hybrid architecture, self-standing COF-net on CNT-net interlayers (called "NN interlayers") are fabricated through CNT-templated in situ COF synthesis and then inserted between sulfur cathodes and separators. Two COFs with different micropore sizes (COF-1 (0.7 nm) and COF-5 (2.7 nm)) are chosen as model systems. The effects of the pore size and (boron-mediated) chemical affinity of microporous COF nets on Li2Sx adsorption phenomena are theoretically investigated through density functional theory calculations. Benefiting from the chemical/structural uniqueness, the NN interlayers effectively capture Li2Sx without impairing their ion/electron conduction. Notably, the COF-1 NN interlayer, driven by the well-designed microporous structure, allows for the selective deposition/dissolution (i.e., facile solid-liquid conversion) of electrically inert Li2S. As a consequence, the COF-1 NN interlayer provides a significant improvement in the electrochemical performance of Li-S cells (capacity retention after 300 cycles (at charge/discharge rate = 2.0 C/2.0 C) = 84% versus 15% for a control cell with no interlayer) that lies far beyond those accessible with conventional Li-S technologies.

  5. Space station interior design: Results of the NASA/AIA space station interior national design competition

    Science.gov (United States)

    Haines, R. F.

    1975-01-01

    The results of the NASA/AIA space station interior national design competition held during 1971 are presented in order to make available to those who work in the architectural, engineering, and interior design fields the results of this design activity in which the interiors of several space shuttle size modules were designed for optimal habitability. Each design entry also includes a final configuration of all modules into a complete space station. A brief history of the competition is presented with the competition guidelines and constraints. The first place award entry is presented in detail, and specific features from other selected designs are discussed. This is followed by a discussion of how some of these design features might be applied to terrestrial as well as space situations.

  6. Methodological design of the National Health and Nutrition Survey 2016

    Directory of Open Access Journals (Sweden)

    Martín Romero-Martínez

    2017-05-01

    Full Text Available Objective. Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC 2016. Materials and methods. The Ensanut-MC is a national probabilistic survey whose objective population are the in­habitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organization. Results. A final sample of 9 479 completed household interviews, and a sample of 16 591 individual interviews. The response rate for households was 77.9%, and the response rate for individuals was 91.9%. Conclusions. The Ensanut-MC probabilistic design allows valid statistical inferences about interest parameters for Mexico´s public health and nutrition, specifically on over­weight, obesity and diabetes mellitus. Updated information also supports the monitoring, updating and formulation of new policies and priority programs.

  7. Hierarchical DSE for multi-ASIP platforms

    DEFF Research Database (Denmark)

    Micconi, Laura; Corvino, Rosilde; Gangadharan, Deepak;

    2013-01-01

    This work proposes a hierarchical Design Space Exploration (DSE) for the design of multi-processor platforms targeted to specific applications with strict timing and area constraints. In particular, it considers platforms integrating multiple Application Specific Instruction Set Processors (ASIPs...

  8. Functional annotation of hierarchical modularity.

    Directory of Open Access Journals (Sweden)

    Kanchana Padmanabhan

    Full Text Available In biological networks of molecular interactions in a cell, network motifs that are biologically relevant are also functionally coherent, or form functional modules. These functionally coherent modules combine in a hierarchical manner into larger, less cohesive subsystems, thus revealing one of the essential design principles of system-level cellular organization and function-hierarchical modularity. Arguably, hierarchical modularity has not been explicitly taken into consideration by most, if not all, functional annotation systems. As a result, the existing methods would often fail to assign a statistically significant functional coherence score to biologically relevant molecular machines. We developed a methodology for hierarchical functional annotation. Given the hierarchical taxonomy of functional concepts (e.g., Gene Ontology and the association of individual genes or proteins with these concepts (e.g., GO terms, our method will assign a Hierarchical Modularity Score (HMS to each node in the hierarchy of functional modules; the HMS score and its p-value measure functional coherence of each module in the hierarchy. While existing methods annotate each module with a set of "enriched" functional terms in a bag of genes, our complementary method provides the hierarchical functional annotation of the modules and their hierarchically organized components. A hierarchical organization of functional modules often comes as a bi-product of cluster analysis of gene expression data or protein interaction data. Otherwise, our method will automatically build such a hierarchy by directly incorporating the functional taxonomy information into the hierarchy search process and by allowing multi-functional genes to be part of more than one component in the hierarchy. In addition, its underlying HMS scoring metric ensures that functional specificity of the terms across different levels of the hierarchical taxonomy is properly treated. We have evaluated our

  9. Rather unspectacular: design choices in National Health Service glasses

    Directory of Open Access Journals (Sweden)

    Dr Joanne Gooding

    2017-04-01

    Full Text Available This article considers the design and production of spectacles in Britain following the introduction of standardised frame styles under the National Health Service. NHS spectacles were provided as a functional, durable medical appliance to be delivered cost-effectively and there was no explicit concern for fashion or the patient experience. The actions of the government and professional bodies greatly affected the trade in eyewear and thus restricted opportunities for innovative design and consumer choice. Within the range of state regulation frames there was no active concern for ‘design’ in terms of appearance and it was only through the purchase of private frames that significant choice and variety in eyewear could be attained. The scope for the public to select a more fashionable frame whilst receiving an element of state aid was through the purchase of NHS hybrid private frames.

  10. Hierarchical Grid Based on OGSA Grid Scheduling Design%基于OGSA网格的分层式网格任务调度器设计

    Institute of Scientific and Technical Information of China (English)

    邓宾

    2012-01-01

    Based on the demand for grid task scheduling,task scheduling features of the grid,in the full analysis of the general process of grid task scheduling,etc.,based on a grid computing environment,while taking into account some characteristics,such as virtualization,hierarchical and the essential characteristics of autonomy,and collaborative workflow tasks demand grid tasks under resource-dependent,coarse-grained,repeat and other characteristics of the premise,to improve the design of a grid workflow task master-slave hierarchical scheduling model,and gives the scheduling policy and scheduling algorithm.The scheduler model grid in the actual task of collaborative workflow system has been good application results.%文章根据网格任务调度的需求、网格任务调度的特点,在充分分析一般网格任务调度的过程等的基础上,另外考虑到了网格计算环境的一些特点,比如虚拟化、分层次及自治的本质特征,以及在工作流任务协同需求下网格任务的资源依赖、粗粒度、重复执行等特性的前提下,改进设计了一种网格工作流任务主从式分层调度模型,并给出了调度策略和调度算法实现。该调度器模型在实际的网格工作流任务协同系统中得到了较好的应用效果。

  11. Discussion on Hierarchical Design of Compiler Principles Practice%《编译原理》实验的层次化设计

    Institute of Scientific and Technical Information of China (English)

    金永霞; 丁海军

    2012-01-01

    《编译原理》实验方案的设计与实施对该课程整体教学质量起着重要作用。提出一种层次化实验设计方案,根据课堂授课进度、学生的接受能力以及编译理论的实际应用.设计不同难度的实验内容并分阶段实施。该项研究对《编译原理》课程建设和教学改革具有一定的意义。%Design and implementation of the practice scheme of Compiler Principles is very important to the whole teaching quality. Proposes a hierarchical practice design scheme. Based on the class- teaching schedule, capabilities of students and application of Compiler Principles, designs and realizes different practice contents by stages. This work has significance for construction and teaching reformation of Compiler Principle course.

  12. Design for environment for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Cantwell, E.; Gobor, K.; Celeste, J.; Cerruti, S.

    1998-05-01

    The National Ignition Facility (NIF) will be a U.S. Department of Energy (DOE) national center for inertial confinement fusion (ICF) and other research into the physics of high temperatures and high densities, and a vital element of the DOE`s nuclear weapons Stockpile Stewardship and Management Program. It will be used by scientists from a numerous different institutions and disciplines to support research advancements in national security, energy, basic science, and economic development. Multiple powerful laser beams will `ignite` small fusion targets, helping liberate more energy than is required to initiate the fusion reactions. This paper discusses the Design for Environment process for NIF, some of the subsequent activities resulting from the initial study, and a few of the lessons learned from this process. Subsequent activities include the development of a Pollution Prevention and Waste Minimization Plan (P2/WMin) for the facility, which includes Pollution Prevention Opportunity Assessments (PPOAS) on predicted waste streams from NIF, development of construction phase recycling plans, analysis of some of the specialized materials of construction to minimize future demolition and decommissioning (D&D) costs and development of cost assessments for more benign cleaning procedures that meet the stringent cleaning specifications for this facility.

  13. Preliminary Design Study for a National Digital Seismograph Network

    Science.gov (United States)

    Peterson, Jon; Hutt, Charles R.

    1981-01-01

    Introduction Recently, the National Research Council published a report by the Panel on National, Regional, and Local Seismograph Networks of the Committee on Seismology in which the principal recommendation was for the establishment of a national digital seismograph network (NDSN). The Panel Report (Bolt, 1980) addresses both the need and the scientific requirements for the new national network. The purpose of this study has been to translate the scientific requirements into an instrumentation concept for the NSDS. There are literally hundreds, perhaps thousands, of seismographs in operation within the United States. Each serves an important purpose, but most have limited objectives in time, in region, or in the types of data that are being recorded. The concept of a national network, funded and operated by the Federal Government, is based on broader objectives that include continuity of time, uniform coverage, standardization of data format and instruments, and widespread use of the data for a variety of research purposes. A national digital seismograph network will be an important data resource for many years to come; hence, its design is likely to be of interest to most seismologists. Seismologists have traditionally been involved in the development and field operation of seismic systems and thus have been familiar with both the potential value and the limitations of the data. However, in recent years of increasing technological sophistication, the development of data sstems has fallen more to system engineers, and this trend is likely to continue. One danger in this is that the engineers may misinterpret scientific objectives or subordinate them to purely technological considerations. Another risk is that the data users may misuse or misinterpret the data because they are not aware of the limitations of the data system. Perhaps the most important purpose of a design study such as this is to stimulate a dialogue between system engineers and potential data users

  14. Design Method of the Semantic-driven Hierarchical Map Symbols%语义驱动的层次化地图符号设计方法

    Institute of Scientific and Technical Information of China (English)

    田江鹏; 贾奋励; 夏青; 吴金兵

    2012-01-01

    Research of map symbols is an important part of cartography. Currently, the main research of map symbols was focused on the visual graphics but paying little attention to the semantic. This paper puts forward a method of semantic-driven hierarchical map symbols design. In this method the semantic relation of map symbols is as a benchmark to the construction of symbol graphics, and the symbol graphics is controlled by semantic model. So we can fully exploit the intrinsic value of the semantic components of the map symbols in its design activities. We mainly focused on such four key steps of the method. The first one is semantic feature extraction. We systematically summarized the semantic feature of the map symbols by using ontological level concept. Second step is about morphemes design. The concept, design principles of morphemes and its important role in map symbols design was discussed. The third is about modeling of the associative semantic relation. In this step the modeling methods was discussed and a practice that show how to construct an associative semantic model based on common map symbols for the public geographical information was conducted. The fourth is semantics-driven generation of map symbols. The processes and characteristics of a symbol's generation was analyzed. An existing map symbol standard was improved by using our symbol design method. And a group of cognitive experiments have been done which show that the propound method has a superior performance in cognitive efficiency and relatively stable and high transmission efficiency in the analog process of information transmission. In conclusion, the semantic relation of the geospatial objects is the core of the method of semantic-driven hierarchical map symbols design, which is aimed to improve the graphic design and understanding of map symbols. Characterized by the symbol design oriented ontology domain, this method makes the map symbols more semantic-evident for better recognition

  15. Rational design of anatase TiO2 architecture with hierarchical nanotubes and hollow microspheres for high-performance dye-sensitized solar cells

    Science.gov (United States)

    Gu, Jiuwang; Khan, Javid; Chai, Zhisheng; Yuan, Yufei; Yu, Xiang; Liu, Pengyi; Wu, Mingmei; Mai, Wenjie

    2016-01-01

    Large surface area, sufficient light-harvesting and superior electron transport property are the major factors for an ideal photoanode of dye-sensitized solar cells (DSSCs), which requires rational design of the nanoarchitectures and smart integration of state-of-the-art technologies. In this work, a 3D anatase TiO2 architecture consisting of vertically aligned 1D hierarchical TiO2 nanotubes (NTs) with ultra-dense branches (HTNTs, bottom layer) and 0D hollow TiO2 microspheres with rough surface (HTS, top layer) is first successfully constructed on transparent conductive fluorine-doped tin oxide glass through a series of facile processes. When used as photoanodes, the DSSCs achieve a very large short-current density of 19.46 mA cm-2 and a high overall power conversion efficiency of 8.38%. The remarkable photovoltaic performance is predominantly ascribed to the enhanced charge transport capacity of the NTs (function as the electron highway), the large surface area of the branches (act as the electron branch lines), the pronounced light harvesting efficiency of the HTS (serve as the light scattering centers), and the engineered intimate interfaces between all of them (minimize the recombination effect). Our work demonstrates a possibility of fabricating superior photoanodes for high-performance DSSCs by rational design of nanoarchitectures and smart integration of multi-functional components.

  16. Structural integrity of hierarchical composites

    Directory of Open Access Journals (Sweden)

    Marco Paggi

    2012-01-01

    Full Text Available Interface mechanical problems are of paramount importance in engineering and materials science. Traditionally, due to the complexity of modelling their mechanical behaviour, interfaces are often treated as defects and their features are not explored. In this study, a different approach is illustrated, where the interfaces play an active role in the design of innovative hierarchical composites and are fundamental for their structural integrity. Numerical examples regarding cutting tools made of hierarchical cellular polycrystalline materials are proposed, showing that tailoring of interface properties at the different scales is the way to achieve superior mechanical responses that cannot be obtained using standard materials

  17. Hierarchical Multiagent Reinforcement Learning

    Science.gov (United States)

    2004-01-25

    In this paper, we investigate the use of hierarchical reinforcement learning (HRL) to speed up the acquisition of cooperative multiagent tasks. We...introduce a hierarchical multiagent reinforcement learning (RL) framework and propose a hierarchical multiagent RL algorithm called Cooperative HRL. In

  18. Hierarchically Nanostructured Materials for Sustainable Environmental Applications

    Science.gov (United States)

    Ren, Zheng; Guo, Yanbing; Liu, Cai-Hong; Gao, Pu-Xian

    2013-11-01

    This article presents a comprehensive overview of the hierarchical nanostructured materials with either geometry or composition complexity in environmental applications. The hierarchical nanostructures offer advantages of high surface area, synergistic interactions and multiple functionalities towards water remediation, environmental gas sensing and monitoring as well as catalytic gas treatment. Recent advances in synthetic strategies for various hierarchical morphologies such as hollow spheres and urchin-shaped architectures have been reviewed. In addition to the chemical synthesis, the physical mechanisms associated with the materials design and device fabrication have been discussed for each specific application. The development and application of hierarchical complex perovskite oxide nanostructures have also been introduced in photocatalytic water remediation, gas sensing and catalytic converter. Hierarchical nanostructures will open up many possibilities for materials design and device fabrication in environmental chemistry and technology.

  19. Hierarchically nanostructured materials for sustainable environmental applications

    Science.gov (United States)

    Ren, Zheng; Guo, Yanbing; Liu, Cai-Hong; Gao, Pu-Xian

    2013-01-01

    This review presents a comprehensive overview of the hierarchical nanostructured materials with either geometry or composition complexity in environmental applications. The hierarchical nanostructures offer advantages of high surface area, synergistic interactions, and multiple functionalities toward water remediation, biosensing, environmental gas sensing and monitoring as well as catalytic gas treatment. Recent advances in synthetic strategies for various hierarchical morphologies such as hollow spheres and urchin-shaped architectures have been reviewed. In addition to the chemical synthesis, the physical mechanisms associated with the materials design and device fabrication have been discussed for each specific application. The development and application of hierarchical complex perovskite oxide nanostructures have also been introduced in photocatalytic water remediation, gas sensing, and catalytic converter. Hierarchical nanostructures will open up many possibilities for materials design and device fabrication in environmental chemistry and technology. PMID:24790946

  20. Hierarchically Nanostructured Materials for Sustainable Environmental Applications

    Directory of Open Access Journals (Sweden)

    Zheng eRen

    2013-11-01

    Full Text Available This article presents a comprehensive overview of the hierarchical nanostructured materials with either geometry or composition complexity in environmental applications. The hierarchical nanostructures offer advantages of high surface area, synergistic interactions and multiple functionalities towards water remediation, environmental gas sensing and monitoring as well as catalytic gas treatment. Recent advances in synthetic strategies for various hierarchical morphologies such as hollow spheres and urchin-shaped architectures have been reviewed. In addition to the chemical synthesis, the physical mechanisms associated with the materials design and device fabrication have been discussed for each specific application. The development and application of hierarchical complex perovskite oxide nanostructures have also been introduced in photocatalytic water remediation, gas sensing and catalytic converter. Hierarchical nanostructures will open up many possibilities for materials design and device fabrication in environmental chemistry and technology.

  1. On the Integration of National Costume Elements and Modern Costume Design

    Directory of Open Access Journals (Sweden)

    Ning Sun

    2014-02-01

    Full Text Available With the increasing development of modern national costume design, the integration of national costume elements and modern costume design has been in widely application and has become the focus of modern costume designers. In order to protect and develop the essence of the traditional national culture, it is necessary to further explore and flexibly apply national costume elements, to find the joint point between national culture and modern elements, and to create modern costume which is rich in national characteristics. The paper describes the main content of national costume elements and the meaning of its application to modern costume design, discusses the specific content of the integration of national costume elements and modern costume design, and further reflects the profound traditional culture by using modern design language which makes the works vintage and modern.

  2. Frequency-Division Power Sharing and Hierarchical Control Design for DC Shipboard Microgrids with Hybrid Energy Storage Systems

    DEFF Research Database (Denmark)

    Jin, Zheming; Meng, Lexuan; Quintero, Juan Carlos Vasquez

    2017-01-01

    Due to the increasing need to reduce the cost and emission of ships, shipboard applications are calling advanced technologies to go onboard. Recently, cleaner power sources (i.e. gas turbines, fuel cell, solar and wind power), energy storage, advanced control and power/energy management are intro......Due to the increasing need to reduce the cost and emission of ships, shipboard applications are calling advanced technologies to go onboard. Recently, cleaner power sources (i.e. gas turbines, fuel cell, solar and wind power), energy storage, advanced control and power/energy management...... are introduced to meet the new requirement, and therefore, making shipboard power system more like a microgrid. In this paper, a frequency-division based power sharing method is proposed to solve the contradiction between fuel efficiency and dynamic load conditions of marine vessels. With effective design...

  3. Hierarchical self-assembly of designed 2x2-alpha-helix bundle proteins on Au(111) surfaces

    DEFF Research Database (Denmark)

    Wackerbarth, Hainer; Tofteng, A.P.; Jensen, K.J.

    2006-01-01

    Self-assembled monolayers of biomolecules on atomically planar surfaces offer the prospect of complex combinations of controlled properties, e. g., for bioelectronics. We have prepared a novel hemi-4-alpha-helix bundle protein by attaching two alpha-helical peptides to a cyclo-dithiothreitol (cyclo......-DTT) template. The protein was de novo designed to self-assemble in solution to form a 4-alpha-helix bundle, whereas the disulfide moiety enables the formation of a self-assembled monolayer on a Au(111) surface by opening of the disulfide, thus giving rise to a two-step self-assembly process. The 2 x 2-alpha......-helix bundle protein and its template were studied by X-ray photo electron spectroscopy (XPS), electrochemical methods, and electrochemical in situ scanning tunneling microscopy (in situ STM). XPS showed that the cyclo-DTT opens on adsorption to a gold surface with the integrity of the 2 x 2- R-helix bundle...

  4. 75 FR 2935 - Extension of Deadline for Promulgating Designations for the 2008 Ozone National Ambient Air...

    Science.gov (United States)

    2010-01-19

    ... Protection Agency 40 CFR Parts 50, 58 and 81 Ozone National Ambient Air Quality Standards; Final Rule and... Designations for the 2008 Ozone National Ambient Air Quality Standards AGENCY: Environmental Protection Agency... promulgating initial area designations for the ozone national ambient air quality standards (NAAQS) that...

  5. 78 FR 19799 - National Baseball Hall of Fame Commemorative Coin Program Design Competition

    Science.gov (United States)

    2013-04-02

    ... United States Mint National Baseball Hall of Fame Commemorative Coin Program Design Competition ACTION: Notification of the Opening of the National Baseball Hall of Fame Commemorative Coin Program Design Competition... (heads side) of the 2014 National Baseball Hall of Fame Commemorative Coins. The competition, which...

  6. 3 CFR - Designation of Officers of the National Aeronautics And Space Administration To Act as Administrator

    Science.gov (United States)

    2010-01-01

    ... 3 The President 1 2010-01-01 2010-01-01 false Designation of Officers of the National Aeronautics... Memorandum of January 16, 2009 Designation of Officers of the National Aeronautics And Space Administration To Act as Administrator Memorandum for the Administrator of the National Aeronautics and...

  7. Estimates from two survey designs: national hospital discharge survey.

    Science.gov (United States)

    Haupt, B J; Kozak, L J

    1992-05-01

    The methodology for the National Hospital Discharge Survey (NHDS) has been revised in several ways. These revisions, which were implemented for the 1988 NHDS, included adoption of a different hospital sampling frame, changes in the sampling design (in particular the implementation of a three-stage design), increased use of data purchased from abstracting service organizations, and adjustments to the estimation procedures used to derive the national estimates. To investigate the effects of these revisions on the estimates of hospital use from the NHDS, data were collected from January through March of 1988 using both the old and the new survey methods. This study compared estimates based on the old and the new survey methods for a variety of hospital and patient characteristics. Although few estimates were identical across survey methodologies, most of the variations could be attributed to sampling error. Estimates from two different samples of the same population would be expected to vary by chance even if precisely the same methods were used to collect and process the data. Because probability samples were used for the old and new survey methodologies, sampling error could be measured. Approximate relative standard errors were calculated for the estimates using the old and new survey methods. Taking these errors into account, less than 10 percent of the estimates were found to differ across survey methodologies at the 0.05 level of significance. Because a large number of comparisons were made, 5 percent of the estimates could have been found to be significantly different by chance alone. When there were statistically significant differences in nonmedical data, the new methods appeared to produce more accurate estimates than the old methods did. Race was more likely to be reported using the new methods. "New" estimates for hospitals in the West Region and government-owned hospitals were more similar than the corresponding "old" estimates to data from the census of

  8. Hierarchical Affinity Propagation

    CERN Document Server

    Givoni, Inmar; Frey, Brendan J

    2012-01-01

    Affinity propagation is an exemplar-based clustering algorithm that finds a set of data-points that best exemplify the data, and associates each datapoint with one exemplar. We extend affinity propagation in a principled way to solve the hierarchical clustering problem, which arises in a variety of domains including biology, sensor networks and decision making in operational research. We derive an inference algorithm that operates by propagating information up and down the hierarchy, and is efficient despite the high-order potentials required for the graphical model formulation. We demonstrate that our method outperforms greedy techniques that cluster one layer at a time. We show that on an artificial dataset designed to mimic the HIV-strain mutation dynamics, our method outperforms related methods. For real HIV sequences, where the ground truth is not available, we show our method achieves better results, in terms of the underlying objective function, and show the results correspond meaningfully to geographi...

  9. The Bulgarian National Corpus: Theory and Practice in Corpus Design

    Directory of Open Access Journals (Sweden)

    Svetla Koeva

    2012-12-01

    Full Text Available The paper discusses several key concepts related to the development of corpora and reconsiders them in light of recent developments in NLP. On the basis of an overview of present-day corpora, we conclude that the dominant practices of corpus design do not utilise adequately the technologies and, as a result, fail to meet the demands of corpus linguistics, computational lexicology and computational linguistics alike.We proceed to lay out a data-driven approach to corpus design, which integrates the best practices of traditional corpus linguistics with the potential of the latest technologies allowing fast collection, automatic metadata description and annotation of large amounts of data. Thus, the gist of the approach we propose is that corpus design should be centred on amassing large amounts of mono- and multilingual texts and on providing them with a detailed metadata description and high-quality multi-level annotation.We go on to illustrate this concept with a description of the compilation, structuring, documentation, and annotation of the Bulgarian National Corpus (BulNC. At present it consists of a Bulgarian part of 979.6 million words, constituting the corpus kernel, and 33 Bulgarian-X language corpora, totalling 972.3 million words, 1.95 billion words altogether. The BulNC is supplied with a comprehensive metadata description, which allows us to organise the texts according to different principles. The Bulgarian part of the BulNC is automatically processed (tokenised and sentence split and  annotated at several levels: morphosyntactic tagging, lemmatisation, word-sense annotation, annotation of noun phrases and named entities. Some levels of annotation are also applied to the Bulgarian-English parallel corpus with the prospect of expanding multilingual annotation both in terms of linguistic levels and the number of languages for which it is available. We conclude with a brief evaluation of the quality of the corpus and an outline of

  10. Build a Band Hands-on Challenge: Investigate Sound with PBS's "Design Squad Nation"[TM

    Science.gov (United States)

    Feinberg, Lauren

    2010-01-01

    This article describes "Build a Band" hands-on activity from "Design Squad Nation," which allows kids to use simple materials to build a four-stringed instrument, then tune it and play a song. Kids explore frequency, pitch, and sound energy while following the steps of the engineering design process. By weaving "Design Squad Nation" episodes,…

  11. Hybrid and hierarchical composite materials

    CERN Document Server

    Kim, Chang-Soo; Sano, Tomoko

    2015-01-01

    This book addresses a broad spectrum of areas in both hybrid materials and hierarchical composites, including recent development of processing technologies, structural designs, modern computer simulation techniques, and the relationships between the processing-structure-property-performance. Each topic is introduced at length with numerous  and detailed examples and over 150 illustrations.   In addition, the authors present a method of categorizing these materials, so that representative examples of all material classes are discussed.

  12. The National Early Intervention Longitudinal Study (NEILS) Design Overview.

    Science.gov (United States)

    Hebbeler, Kathleen; Wagner, Mary

    The National Early Intervention Longitudinal Study (NEILS) is being conducted to address some of the most important questions related to the implementation and outcomes of Part C of the Individuals with Disabilities Education Act (IDEA). NEILS is following a nationally representative sample of children from birth to 3 years old and their families…

  13. Hierarchical Optimization of Material and Structure

    DEFF Research Database (Denmark)

    Rodrigues, Helder C.; Guedes, Jose M.; Bendsøe, Martin P.

    2002-01-01

    This paper describes a hierarchical computational procedure for optimizing material distribution as well as the local material properties of mechanical elements. The local properties are designed using a topology design approach, leading to single scale microstructures, which may be restricted...... in various ways, based on design and manufacturing criteria. Implementation issues are also discussed and computational results illustrate the nature of the procedure....

  14. 76 FR 72097 - Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards

    Science.gov (United States)

    2011-11-22

    ... AGENCY 40 CFR Part 81 RIN 2060-AR17 Air Quality Designations for the 2008 Lead (Pb) National Ambient Air... establishes air quality designations for most areas in the United States for the 2008 lead (Pb) National Ambient Air Quality Standards (NAAQS). In a previous action established on November 16, 2010, the EPA...

  15. 75 FR 71033 - Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards

    Science.gov (United States)

    2010-11-22

    ... AGENCY 40 CFR Part 81 RIN-2060-AP78 Air Quality Designations for the 2008 Lead (Pb) National Ambient Air... establishes air quality designations for certain areas in the United States for the 2008 lead (Pb) National Ambient Air Quality Standards (NAAQS). Based on air quality monitoring data, EPA is issuing this rule to...

  16. A Pilot Sampling Design for Estimating Outdoor Recreation Site Visits on the National Forests

    Science.gov (United States)

    Stanley J. Zarnoch; S.M. Kocis; H. Ken Cordell; D.B.K. English

    2002-01-01

    A pilot sampling design is described for estimating site visits to National Forest System lands. The three-stage sampling design consisted of national forest ranger districts, site days within ranger districts, and last-exiting recreation visitors within site days. Stratification was used at both the primary and secondary stages. Ranger districts were stratified based...

  17. Ocmulgee National Monument Visitor Center solar heating and cooling system design review data

    Energy Technology Data Exchange (ETDEWEB)

    1978-05-01

    This document has been prepared as a part of the detailed design of the solar heating and cooling system to be installed at the Ocmulgee National Monument Visitor Center. It describes the 50 percent design review data for this site, and discusses the design approaches, system trade studies, subsystem design and development approach, solar collectors, preliminary specifications and other related information.

  18. Rehabilitation Counseling Practicum: A National Survey of Design and Implementation

    Science.gov (United States)

    Dalgin, Rebecca Spirito; Bruch, Lori A.; Barber, Gerianne

    2010-01-01

    This national study documents current processes and practices used in the master's level rehabilitation counseling practicum such as type of supervision provided, training setting, activities related to rehabilitation skill development, written documentation used during practicum, and use of microskills training. Results are described in relation…

  19. National Merit Scholars; By Design and not by Chance.

    Science.gov (United States)

    Potter, Paula; Dawson, Julie W.

    1988-01-01

    Describes the Potential National Merit Scholars program at Jacksonville (Florida) Schools, an effort to identify exceptionally talented students and schedule them into advanced mathematics and language arts clases in the eighth grade. They may also attend special summer sessions and the superintendent's 100 superscholars program. (MLH)

  20. 77 FR 71399 - Notice of Public Workshop: Blueprint for Action: Workshop on the Design of the National Network...

    Science.gov (United States)

    2012-11-30

    ... the Design of the National Network for Manufacturing Innovation (NNMI) AGENCY: National Institute of... on the Design of the National Network for Manufacturing Innovation (NNMI).'' This workshop series provides a forum for the AMNPO to present the proposed design of the National Network for...

  1. Micromechanics of hierarchical materials

    DEFF Research Database (Denmark)

    Mishnaevsky, Leon, Jr.

    2012-01-01

    A short overview of micromechanical models of hierarchical materials (hybrid composites, biomaterials, fractal materials, etc.) is given. Several examples of the modeling of strength and damage in hierarchical materials are summarized, among them, 3D FE model of hybrid composites...... with nanoengineered matrix, fiber bundle model of UD composites with hierarchically clustered fibers and 3D multilevel model of wood considered as a gradient, cellular material with layered composite cell walls. The main areas of research in micromechanics of hierarchical materials are identified, among them......, the investigations of the effects of load redistribution between reinforcing elements at different scale levels, of the possibilities to control different material properties and to ensure synergy of strengthening effects at different scale levels and using the nanoreinforcement effects. The main future directions...

  2. Introduction into Hierarchical Matrices

    KAUST Repository

    Litvinenko, Alexander

    2013-12-05

    Hierarchical matrices allow us to reduce computational storage and cost from cubic to almost linear. This technique can be applied for solving PDEs, integral equations, matrix equations and approximation of large covariance and precision matrices.

  3. Applied Bayesian Hierarchical Methods

    CERN Document Server

    Congdon, Peter D

    2010-01-01

    Bayesian methods facilitate the analysis of complex models and data structures. Emphasizing data applications, alternative modeling specifications, and computer implementation, this book provides a practical overview of methods for Bayesian analysis of hierarchical models.

  4. Programming with Hierarchical Maps

    DEFF Research Database (Denmark)

    Ørbæk, Peter

    This report desribes the hierarchical maps used as a central data structure in the Corundum framework. We describe its most prominent features, ague for its usefulness and briefly describe some of the software prototypes implemented using the technology....

  5. Catalysis with hierarchical zeolites

    DEFF Research Database (Denmark)

    Holm, Martin Spangsberg; Taarning, Esben; Egeblad, Kresten

    2011-01-01

    Hierarchical (or mesoporous) zeolites have attracted significant attention during the first decade of the 21st century, and so far this interest continues to increase. There have already been several reviews giving detailed accounts of the developments emphasizing different aspects of this research...... topic. Until now, the main reason for developing hierarchical zeolites has been to achieve heterogeneous catalysts with improved performance but this particular facet has not yet been reviewed in detail. Thus, the present paper summaries and categorizes the catalytic studies utilizing hierarchical...... zeolites that have been reported hitherto. Prototypical examples from some of the different categories of catalytic reactions that have been studied using hierarchical zeolite catalysts are highlighted. This clearly illustrates the different ways that improved performance can be achieved with this family...

  6. US Forest Service National Forest Lands with Nationally Designated Management or Use Limitations 

    Data.gov (United States)

    US Forest Service, Department of Agriculture — A map service on the www depicting an area depicting National Forest System land parcels that have management or use limits placed on them by legal authority....

  7. US Forest Service National Forest Lands with Nationally Designated Management or Use Limitations: Legal Status

    Data.gov (United States)

    US Forest Service, Department of Agriculture — A map service on the www depicting the status of areas showing National Forest System land parcels that have management or use limits placed on them by legal...

  8. Computer integration of engineering design and production: A national opportunity

    Science.gov (United States)

    1984-01-01

    The National Aeronautics and Space Administration (NASA), as a purchaser of a variety of manufactured products, including complex space vehicles and systems, clearly has a stake in the advantages of computer-integrated manufacturing (CIM). Two major NASA objectives are to launch a Manned Space Station by 1992 with a budget of $8 billion, and to be a leader in the development and application of productivity-enhancing technology. At the request of NASA, a National Research Council committee visited five companies that have been leaders in using CIM. Based on these case studies, technical, organizational, and financial issues that influence computer integration are described, guidelines for its implementation in industry are offered, and the use of CIM to manage the space station program is recommended.

  9. Design and development of linked data from the National Map

    Science.gov (United States)

    Usery, E. Lynn; Varanka, Dalia E.

    2012-01-01

    The development of linked data on the World-Wide Web provides the opportunity for the U.S. Geological Survey (USGS) to supply its extensive volumes of geospatial data, information, and knowledge in a machine interpretable form and reach users and applications that heretofore have been unavailable. To pilot a process to take advantage of this opportunity, the USGS is developing an ontology for The National Map and converting selected data from nine research test areas to a Semantic Web format to support machine processing and linked data access. In a case study, the USGS has developed initial methods for legacy vector and raster formatted geometry, attributes, and spatial relationships to be accessed in a linked data environment maintaining the capability to generate graphic or image output from semantic queries. The description of an initial USGS approach to developing ontology, linked data, and initial query capability from The National Map databases is presented.

  10. Treatment Protocols as Hierarchical Structures

    Science.gov (United States)

    Ben-Bassat, Moshe; Carlson, Richard W.; Puri, Vinod K.; Weil, Max Harry

    1978-01-01

    We view a treatment protocol as a hierarchical structure of therapeutic modules. The lowest level of this structure consists of individual therapeutic actions. Combinations of individual actions define higher level modules, which we call routines. Routines are designed to manage limited clinical problems, such as the routine for fluid loading to correct hypovolemia. Combinations of routines and additional actions, together with comments, questions, or precautions organized in a branching logic, in turn, define the treatment protocol for a given disorder. Adoption of this modular approach may facilitate the formulation of treatment protocols, since the physician is not required to prepare complex flowcharts. This hierarchical approach also allows protocols to be updated and modified in a flexible manner. By use of such a standard format, individual components may be fitted together to create protocols for multiple disorders. The technique is suited for computer implementation. We believe that this hierarchical approach may facilitate standarization of patient care as well as aid in clinical teaching. A protocol for acute pancreatitis is used to illustrate this technique.

  11. Onboard hierarchical network

    Science.gov (United States)

    Tunesi, Luca; Armbruster, Philippe

    2004-02-01

    The objective of this paper is to demonstrate a suitable hierarchical networking solution to improve capabilities and performances of space systems, with significant recurrent costs saving and more efficient design & manufacturing flows. Classically, a satellite can be split in two functional sub-systems: the platform and the payload complement. The platform is in charge of providing power, attitude & orbit control and up/down-link services, whereas the payload represents the scientific and/or operational instruments/transponders and embodies the objectives of the mission. One major possibility to improve the performance of payloads, by limiting the data return to pertinent information, is to process data on board thanks to a proper implementation of the payload data system. In this way, it is possible to share non-recurring development costs by exploiting a system that can be adopted by the majority of space missions. It is believed that the Modular and Scalable Payload Data System, under development by ESA, provides a suitable solution to fulfil a large range of future mission requirements. The backbone of the system is the standardised high data rate SpaceWire network http://www.ecss.nl/. As complement, a lower speed command and control bus connecting peripherals is required. For instance, at instrument level, there is a need for a "local" low complexity bus, which gives the possibility to command and control sensors and actuators. Moreover, most of the connections at sub-system level are related to discrete signals management or simple telemetry acquisitions, which can easily and efficiently be handled by a local bus. An on-board hierarchical network can therefore be defined by interconnecting high-speed links and local buses. Additionally, it is worth stressing another important aspect of the design process: Agencies and ESA in particular are frequently confronted with a big consortium of geographically spread companies located in different countries, each one

  12. Design and Implementation of the Australian National Data Service

    Directory of Open Access Journals (Sweden)

    Andrew Treloar

    2009-06-01

    Full Text Available Normal 0 This paper will describe the genesis and realisation of the Australian National Data Service (ANDS. It will commence by outlining the context within which ANDS was conceived, both in the international research and Australian research support domains. It will then describe the process that brought about the ANDS vision and the principles that informed the realisation of that vision. The paper will then outline each of the four ANDS programs (Developing Frameworks, Providing Utilities, Seeding the Commons, and Building Capabilities while also discussing particular items of note about the approach ANDS is taking. The paper concludes by briefly examining related work in the UK and US.

  13. 75 FR 77783 - Designation of National Security Positions

    Science.gov (United States)

    2010-12-14

    ..., discussing public trust risk designations related to suitability. When read together, the two sections.... 13488 now requires public trust suitability reinvestigations under 5 CFR part 731 for every covered... From the Federal Register Online via the Government Publishing Office #0; #0;Proposed Rules...

  14. Evaluating Hierarchical Structure in Music Annotations.

    Science.gov (United States)

    McFee, Brian; Nieto, Oriol; Farbood, Morwaread M; Bello, Juan Pablo

    2017-01-01

    Music exhibits structure at multiple scales, ranging from motifs to large-scale functional components. When inferring the structure of a piece, different listeners may attend to different temporal scales, which can result in disagreements when they describe the same piece. In the field of music informatics research (MIR), it is common to use corpora annotated with structural boundaries at different levels. By quantifying disagreements between multiple annotators, previous research has yielded several insights relevant to the study of music cognition. First, annotators tend to agree when structural boundaries are ambiguous. Second, this ambiguity seems to depend on musical features, time scale, and genre. Furthermore, it is possible to tune current annotation evaluation metrics to better align with these perceptual differences. However, previous work has not directly analyzed the effects of hierarchical structure because the existing methods for comparing structural annotations are designed for "flat" descriptions, and do not readily generalize to hierarchical annotations. In this paper, we extend and generalize previous work on the evaluation of hierarchical descriptions of musical structure. We derive an evaluation metric which can compare hierarchical annotations holistically across multiple levels. sing this metric, we investigate inter-annotator agreement on the multilevel annotations of two different music corpora, investigate the influence of acoustic properties on hierarchical annotations, and evaluate existing hierarchical segmentation algorithms against the distribution of inter-annotator agreement.

  15. Evaluating Hierarchical Structure in Music Annotations

    Directory of Open Access Journals (Sweden)

    Brian McFee

    2017-08-01

    Full Text Available Music exhibits structure at multiple scales, ranging from motifs to large-scale functional components. When inferring the structure of a piece, different listeners may attend to different temporal scales, which can result in disagreements when they describe the same piece. In the field of music informatics research (MIR, it is common to use corpora annotated with structural boundaries at different levels. By quantifying disagreements between multiple annotators, previous research has yielded several insights relevant to the study of music cognition. First, annotators tend to agree when structural boundaries are ambiguous. Second, this ambiguity seems to depend on musical features, time scale, and genre. Furthermore, it is possible to tune current annotation evaluation metrics to better align with these perceptual differences. However, previous work has not directly analyzed the effects of hierarchical structure because the existing methods for comparing structural annotations are designed for “flat” descriptions, and do not readily generalize to hierarchical annotations. In this paper, we extend and generalize previous work on the evaluation of hierarchical descriptions of musical structure. We derive an evaluation metric which can compare hierarchical annotations holistically across multiple levels. sing this metric, we investigate inter-annotator agreement on the multilevel annotations of two different music corpora, investigate the influence of acoustic properties on hierarchical annotations, and evaluate existing hierarchical segmentation algorithms against the distribution of inter-annotator agreement.

  16. Title I conceptual design for Pit 6 landfill closure at Lawrence Livermore National Laboratory Site 300

    Energy Technology Data Exchange (ETDEWEB)

    MacDonnell, B.A.; Obenauf, K.S. [Golder Associates, Inc., Alameda, CA (United States)

    1996-08-01

    The objective of this design project is to evaluate and prepare design and construction documents for a closure cover cap for the Pit 6 Landfill located at Lawrence Livermore National Laboratory Site 300. This submittal constitutes the Title I Design (Conceptual Design) for the closure cover of the Pit 6 Landfill. A Title I Design is generally 30 percent of the design effort. Title H Design takes the design to 100 percent complete. Comments and edits to this Title I Design will be addressed in the Title II design submittal. Contents of this report are as follows: project background; design issues and engineering approach; design drawings; calculation packages; construction specifications outline; and construction quality assurance plan outline.

  17. 77 FR 34023 - Notice of Public Workshop: “Designing for Impact: Workshop on Building the National Network for...

    Science.gov (United States)

    2012-06-08

    ... on Building the National Network for Manufacturing Innovation'' AGENCY: Advanced Manufacturing... entitled ``Designing for Impact: Workshop on Building the National Network for Manufacturing Innovation... proposed building a national network consisting of up to 15 IMIs. On December 15, 2011, Commerce...

  18. 77 FR 20010 - Notice of Public Workshop: “Designing for Impact: Workshop on Building the National Network for...

    Science.gov (United States)

    2012-04-03

    ... on Building the National Network for Manufacturing Innovation'' AGENCY: Advanced Manufacturing... ``Designing for Impact: Workshop on Building the National Network for Manufacturing Innovation.'' The... building a national network consisting of up to 15 IMIs. Individuals planning to attend the public...

  19. Picnic Tables within the Designated Picnic Area at Cedar Breaks National Monument, Utah (pcnctbl)

    Data.gov (United States)

    National Park Service, Department of the Interior — This coverage contains the individual picnic areas (as points where the picnic tables are generally located) within the only designated picnic area at Cedar Breaks...

  20. Design of Initial Opacity Platform at the National Ignition Facility

    Science.gov (United States)

    Heeter, R. F.; Ahmed, M. F.; Ayers, S. L.; Emig, J. A.; Iglesias, C. A.; Liedahl, D. A.; Schneider, M. B.; Wilson, B. G.; Huffman, E. J.; King, J. A.; Opachich, Y. P.; Ross, P. W.; Bailey, J. E.; Rochau, G. A.; Craxton, R. S.; Garcia, E. M.; McKenty, P. W.; Zhang, R.; Cardenas, T.; Devolder, B. G.; Dodd, E. S.; Kline, J. L.; Sherrill, M. E.; Perry, T. S.

    2016-10-01

    The absorption and re-emission of x-rays by partly stripped ions plays a critical role in stars and in many laboratory plasmas. A NIF Opacity Platform has been designed to resolve a persistent disagreement between theory and experiments on the Sandia Z facility, studying iron in conditions closely related to the solar radiation-convection transition boundary. A laser heated hohlraum ``oven'' will produce iron plasmas at temperatures >150 eV and electron densities >=7x1021/cm3, and be probed with continuum X-rays from a capsule implosion backlighter source. The resulting X-ray transmission spectra will be recorded on a specially designed Opacity Spectrometer. This work was performed under the auspices of the U.S. Department of Energy by LLNL under Contract DE-AC52-07NA27344.

  1. Engineering design of the National Spherical Torus Experiment

    Energy Technology Data Exchange (ETDEWEB)

    C. Neumeyer; P. Heitzenroeder; J. Spitzer, J. Chrzanowski; et al

    2000-05-11

    NSTX is a proof-of-principle experiment aimed at exploring the physics of the ``spherical torus'' (ST) configuration, which is predicted to exhibit more efficient magnetic confinement than conventional large aspect ratio tokamaks, amongst other advantages. The low aspect ratio (R/a, typically 1.2--2 in ST designs compared to 4--5 in conventional tokamaks) decreases the available cross sectional area through the center of the torus for toroidal and poloidal field coil conductors, vacuum vessel wall, plasma facing components, etc., thus increasing the need to deploy all components within the so-called ``center stack'' in the most efficient manner possible. Several unique design features have been developed for the NSTX center stack, and careful engineering of this region of the machine, utilizing materials up to their engineering allowables, has been key to meeting the desired objectives. The design and construction of the machine has been accomplished in a rapid and cost effective manner thanks to the availability of extensive facilities, a strong experience base from the TFTR era, and good cooperation between institutions.

  2. Hierarchical Control for Smart Grids

    DEFF Research Database (Denmark)

    Trangbæk, K; Bendtsen, Jan Dimon; Stoustrup, Jakob

    2011-01-01

    This paper deals with hierarchical model predictive control (MPC) of smart grid systems. The design consists of a high level MPC controller, a second level of so-called aggregators, which reduces the computational and communication-related load on the high-level control, and a lower level...... of autonomous consumers. The control system is tasked with balancing electric power production and consumption within the smart grid, and makes active use of the flexibility of a large number of power producing and/or power consuming units. The objective is to accommodate the load variation on the grid, arising...

  3. Safety and environmental process for the design and construction of the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Brereton, S.J., LLNL

    1998-05-27

    The National Ignition Facility (NIF) is a U.S. Department of Energy (DOE) laser fusion experimental facility currently under construction at the Lawrence Livermore National Laboratory (LLNL). This paper describes the safety and environmental processes followed by NIF during the design and construction activities.

  4. 77 FR 30087 - Air Quality Designations for the 2008 Ozone National Ambient Air Quality Standards

    Science.gov (United States)

    2012-05-21

    ... 21, 2012 Part III Environmental Protection Agency 40 CFR Parts 50, 51 and 81 Air Quality Designations for the 2008 Ozone National Ambient Air Quality Standards; Implementation of the 2008 National Ambient Air Quality Standards for Ozone: Nonattainment Area Classifications Approach, Attainment Deadlines and...

  5. The Danish National Health Survey 2010. Study design and respondent characteristics

    DEFF Research Database (Denmark)

    Christensen, Anne Illemann; Ekholm, Ola; Glümer, Charlotte;

    2012-01-01

    In 2010 the five Danish regions and the National Institute of Public Health at the University of Southern Denmark conducted a national representative health survey among the adult population in Denmark. This paper describes the study design and the sample and study population as well as the content...... of the questionnaire....

  6. 78 FR 31847 - Designation of National Security Positions in the Competitive Service, and Related Matters

    Science.gov (United States)

    2013-05-28

    ... OF PERSONNEL MANAGEMENT 5 CFR Part 732 and Chapter IV OFFICE OF THE DIRECTOR OF NATIONAL INTELLIGENCE 5 CFR Chapter IV RIN 3206-AM73 Designation of National Security Positions in the Competitive Service... Intelligence. ACTION: Proposed rule and withdrawal of prior proposed rule. SUMMARY: The U.S. Office...

  7. 50 CFR 86.102 - How did the Service design the National Framework?

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false How did the Service design the National Framework? 86.102 Section 86.102 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT... INFRASTRUCTURE GRANT (BIG) PROGRAM Service Completion of the National Framework § 86.102 How did the...

  8. Parallel hierarchical radiosity rendering

    Energy Technology Data Exchange (ETDEWEB)

    Carter, M.

    1993-07-01

    In this dissertation, the step-by-step development of a scalable parallel hierarchical radiosity renderer is documented. First, a new look is taken at the traditional radiosity equation, and a new form is presented in which the matrix of linear system coefficients is transformed into a symmetric matrix, thereby simplifying the problem and enabling a new solution technique to be applied. Next, the state-of-the-art hierarchical radiosity methods are examined for their suitability to parallel implementation, and scalability. Significant enhancements are also discovered which both improve their theoretical foundations and improve the images they generate. The resultant hierarchical radiosity algorithm is then examined for sources of parallelism, and for an architectural mapping. Several architectural mappings are discussed. A few key algorithmic changes are suggested during the process of making the algorithm parallel. Next, the performance, efficiency, and scalability of the algorithm are analyzed. The dissertation closes with a discussion of several ideas which have the potential to further enhance the hierarchical radiosity method, or provide an entirely new forum for the application of hierarchical methods.

  9. Advanced hierarchical distance sampling

    Science.gov (United States)

    Royle, Andy

    2016-01-01

    In this chapter, we cover a number of important extensions of the basic hierarchical distance-sampling (HDS) framework from Chapter 8. First, we discuss the inclusion of “individual covariates,” such as group size, in the HDS model. This is important in many surveys where animals form natural groups that are the primary observation unit, with the size of the group expected to have some influence on detectability. We also discuss HDS integrated with time-removal and double-observer or capture-recapture sampling. These “combined protocols” can be formulated as HDS models with individual covariates, and thus they have a commonality with HDS models involving group structure (group size being just another individual covariate). We cover several varieties of open-population HDS models that accommodate population dynamics. On one end of the spectrum, we cover models that allow replicate distance sampling surveys within a year, which estimate abundance relative to availability and temporary emigration through time. We consider a robust design version of that model. We then consider models with explicit dynamics based on the Dail and Madsen (2011) model and the work of Sollmann et al. (2015). The final major theme of this chapter is relatively newly developed spatial distance sampling models that accommodate explicit models describing the spatial distribution of individuals known as Point Process models. We provide novel formulations of spatial DS and HDS models in this chapter, including implementations of those models in the unmarked package using a hack of the pcount function for N-mixture models.

  10. Biosurveillance: Efforts to Develop a National Biosurveillance Capability Need a National Strategy and a Designated Leader

    Science.gov (United States)

    2010-06-01

    currently covered are cattle, sheep, goats, equine , swine, commercial poultry, and commercial food fish. The system is a joint effort of the U.S...tuberculosis. However, it can often be prevented with vaccines and can usually be treated with antibiotics or antiviral drugs. Page 77 GAO-10-645 Federal...goats, equine , swine, commercial poultry, and commercial food fish. The National Animal Health Reporting System is a joint effort of the U.S. Animal

  11. Neutrosophic Hierarchical Clustering Algoritms

    Directory of Open Access Journals (Sweden)

    Rıdvan Şahin

    2014-03-01

    Full Text Available Interval neutrosophic set (INS is a generalization of interval valued intuitionistic fuzzy set (IVIFS, whose the membership and non-membership values of elements consist of fuzzy range, while single valued neutrosophic set (SVNS is regarded as extension of intuitionistic fuzzy set (IFS. In this paper, we extend the hierarchical clustering techniques proposed for IFSs and IVIFSs to SVNSs and INSs respectively. Based on the traditional hierarchical clustering procedure, the single valued neutrosophic aggregation operator, and the basic distance measures between SVNSs, we define a single valued neutrosophic hierarchical clustering algorithm for clustering SVNSs. Then we extend the algorithm to classify an interval neutrosophic data. Finally, we present some numerical examples in order to show the effectiveness and availability of the developed clustering algorithms.

  12. An Intelligent Hierarchical Approach to Actuator Fault Diagnosis and Accommodation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal presents a novel intelligent hierarchical approach to detection, isolation, and accommodation of primary aerodynamic actuator failures. The proposed...

  13. Hierarchical social networks and information flow

    Science.gov (United States)

    López, Luis; F. F. Mendes, Jose; Sanjuán, Miguel A. F.

    2002-12-01

    Using a simple model for the information flow on social networks, we show that the traditional hierarchical topologies frequently used by companies and organizations, are poorly designed in terms of efficiency. Moreover, we prove that this type of structures are the result of the individual aim of monopolizing as much information as possible within the network. As the information is an appropriate measurement of centrality, we conclude that this kind of topology is so attractive for leaders, because the global influence each actor has within the network is completely determined by the hierarchical level occupied.

  14. Analyzing security protocols in hierarchical networks

    DEFF Research Database (Denmark)

    Zhang, Ye; Nielson, Hanne Riis

    2006-01-01

    Validating security protocols is a well-known hard problem even in a simple setting of a single global network. But a real network often consists of, besides the public-accessed part, several sub-networks and thereby forms a hierarchical structure. In this paper we first present a process calculus...... capturing the characteristics of hierarchical networks and describe the behavior of protocols on such networks. We then develop a static analysis to automate the validation. Finally we demonstrate how the technique can benefit the protocol development and the design of network systems by presenting a series...

  15. TEXTILE DESIGN ON THE BASE OF THE GOLDEN GEOMETRY AND BULGARIAN NATIONAL TRADITION

    Directory of Open Access Journals (Sweden)

    ILIEVA Julieta

    2016-05-01

    Full Text Available The Golden and Fibonacci geometry forms are symbols of beauty and harmony. The shapes and symbols in the national traditions are always a source of creative ideas. The paper presents textile designs on the base of creations from the Golden and Fibonacci geometry and Bulgarian national tradition. Fourteen textile design project are presented with the use of the Golden spiral in the Golden square, Fibonacci series tiling with equalitarian triangles named Fibonacci rose and the spiral square with four Golden spirals from the Golden and Fibonacci geometry, and the three turtles – symbols from Kolobar tradition in Bulgarian national culture. The forms from the Golden and Fibonacci geometry are used directly as ornaments, constructional elements for ornaments, or as frames for entered elements. The symbols from Kolobar tradition are used directly as ornaments. Every design is presented in suitable two, three or four color model. The used geometrical forms from the Golden geometry and the Bulgarian national tradition are the base for successful textile design using the mirror, radial and translated symmetry and the plain rhythms as result from their combinations. The design is more successful when the geometrical ornaments are combined with suitable colors according to the connections between colors and lines on the base of their meaning, the latest fashion trends, and national traditions.

  16. Improving broadcast channel rate using hierarchical modulation

    CERN Document Server

    Meric, Hugo; Arnal, Fabrice; Lesthievent, Guy; Boucheret, Marie-Laure

    2011-01-01

    We investigate the design of a broadcast system where the aim is to maximise the throughput. This task is usually challenging due to the channel variability. Forty years ago, Cover introduced and compared two schemes: time sharing and superposition coding. The second scheme was proved to be optimal for some channels. Modern satellite communications systems such as DVB-SH and DVB-S2 mainly rely on time sharing strategy to optimize throughput. They consider hierarchical modulation, a practical implementation of superposition coding, but only for unequal error protection or backward compatibility purposes. We propose in this article to combine time sharing and hierarchical modulation together and show how this scheme can improve the performance in terms of available rate. We present the gain on a simple channel modeling the broadcasting area of a satellite. Our work is applied to the DVB-SH standard, which considers hierarchical modulation as an optional feature.

  17. Towards a sustainable manufacture of hierarchical zeolites.

    Science.gov (United States)

    Verboekend, Danny; Pérez-Ramírez, Javier

    2014-03-01

    Hierarchical zeolites have been established as a superior type of aluminosilicate catalysts compared to their conventional (purely microporous) counterparts. An impressive array of bottom-up and top-down approaches has been developed during the last decade to design and subsequently exploit these exciting materials catalytically. However, the sustainability of the developed synthetic methods has rarely been addressed. This paper highlights important criteria to ensure the ecological and economic viability of the manufacture of hierarchical zeolites. Moreover, by using base leaching as a promising case study, we verify a variety of approaches to increase reactor productivity, recycle waste streams, prevent the combustion of organic compounds, and minimize separation efforts. By reducing their synthetic footprint, hierarchical zeolites are positioned as an integral part of sustainable chemistry. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Static and dynamic friction of hierarchical surfaces

    Science.gov (United States)

    Costagliola, Gianluca; Bosia, Federico; Pugno, Nicola M.

    2016-12-01

    Hierarchical structures are very common in nature, but only recently have they been systematically studied in materials science, in order to understand the specific effects they can have on the mechanical properties of various systems. Structural hierarchy provides a way to tune and optimize macroscopic mechanical properties starting from simple base constituents and new materials are nowadays designed exploiting this possibility. This can be true also in the field of tribology. In this paper we study the effect of hierarchical patterned surfaces on the static and dynamic friction coefficients of an elastic material. Our results are obtained by means of numerical simulations using a one-dimensional spring-block model, which has previously been used to investigate various aspects of friction. Despite the simplicity of the model, we highlight some possible mechanisms that explain how hierarchical structures can significantly modify the friction coefficients of a material, providing a means to achieve tunability.

  19. Prevention Trial in the Cherokee Nation: Design of a Randomized Community Trial

    OpenAIRE

    Komro, Kelli A.; Wagenaar, Alexander C; Boyd, Misty; Boyd, B. J.; Kominsky, Terrence; Pettigrew, Dallas; Tobler, Amy L.; LYNNE-LANDSMAN, SARAH D.; Livingston, Melvin D.; Livingston, Bethany; Molina, Mildred M. Maldonado

    2014-01-01

    Despite advances in prevention science and practice in recent decades, the U.S. continues to struggle with significant alcohol-related risks and consequences among youth, especially among vulnerable rural and Native American youth. The Prevention Trial in the Cherokee Nation is a partnership between prevention scientists and Cherokee Nation Behavioral Health to create, implement, and evaluate a new, integrated community-level intervention designed to prevent underage drinking and associated n...

  20. Synthesis of robust hierarchical silica monoliths by surface-mediated solution/precipitation reactions over different scales: designing capillary microreactors for environmental applications.

    Science.gov (United States)

    García-Aguilar, J; Miguel-García, I; Berenguer-Murcia, Á; Cazorla-Amorós, D

    2014-12-24

    A synthetic procedure to prepare novel materials (surface-mediated fillings) based on robust hierarchical monoliths is reported. The methodology includes the deposition of a (micro- or mesoporous) silica thin film on the support followed by growth of a porous monolithic SiO2 structure. It has been demonstrated that this synthesis is viable for supports of different chemical nature with different inner diameters without shrinkage of the silica filling. The formation mechanism of the surface-mediated fillings is based on a solution/precipitation process and the anchoring of the silica filling to the deposited thin film. The interaction between the two SiO2 structures (monolith and thin film) depends on the porosity of the thin film and yields composite materials with different mechanical stability. By this procedure, capillary microreactors have been prepared and have been proved to be highly active and selective in the total and preferential oxidation of carbon monoxide (TOxCO and PrOxCO).

  1. Collaborative Hierarchical Sparse Modeling

    CERN Document Server

    Sprechmann, Pablo; Sapiro, Guillermo; Eldar, Yonina C

    2010-01-01

    Sparse modeling is a powerful framework for data analysis and processing. Traditionally, encoding in this framework is done by solving an l_1-regularized linear regression problem, usually called Lasso. In this work we first combine the sparsity-inducing property of the Lasso model, at the individual feature level, with the block-sparsity property of the group Lasso model, where sparse groups of features are jointly encoded, obtaining a sparsity pattern hierarchically structured. This results in the hierarchical Lasso, which shows important practical modeling advantages. We then extend this approach to the collaborative case, where a set of simultaneously coded signals share the same sparsity pattern at the higher (group) level but not necessarily at the lower one. Signals then share the same active groups, or classes, but not necessarily the same active set. This is very well suited for applications such as source separation. An efficient optimization procedure, which guarantees convergence to the global opt...

  2. Spatial filter lens design for the main laser of the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Korniski, R. J., Optics 1 Inc, Westlake Village, CA

    1998-06-05

    The National Ignition Facility (NIF), being designed and constructed at Lawrence Livermore National Laboratory (LLNL), comprises 192 laser beams The lasing medium is neodymium in phosphate glass with a fundamental frequency (1{omega}) of 1 053{micro}m Sum frequency generation in a pair of conversion crystals (KDP/KD*P) will produce 1 8 megajoules of the third harmonic light (3{omega} or {lambda}=351{micro}m) at the target The purpose of this paper is to provide the lens design community with the current lens design details of the large optics in the Main Laser This paper describes the lens design configuration and design considerations of the Main Laser The Main Laser is 123 meters long and includes two spatial filters one 13 5 meters and one 60 meters These spatial filters perform crucial beam filtering and relaying functions We shall describe the significant lens design aspects of these spatial filter lenses which allow them to successfully deliver the appropriate beam characteristic onto the target For an overview of NIF please see ``Optical system design of the National Ignition Facility,`` by R Edward English. et al also found in this volume.

  3. TRANSIMS and the hierarchical data format

    Energy Technology Data Exchange (ETDEWEB)

    Bush, B.W.

    1997-06-12

    The Hierarchical Data Format (HDF) is a general-purposed scientific data format developed at the National Center for Supercomputing Applications. It supports metadata, compression, and a variety of data structures (multidimensional arrays, raster images, tables). FORTRAN 77 and ANSI C programming interfaces are available for it and a wide variety of visualization tools read HDF files. The author discusses the features of this file format and its possible uses in TRANSIMS.

  4. 75 FR 22409 - Decision To Evaluate a Petition To Designate a Class of Employees From the Sandia National...

    Science.gov (United States)

    2010-04-28

    ... National Laboratory in Albuquerque, NM, To Be Included in the Special Exposure Cohort AGENCY: National... designate a class of employees from the Sandia National Laboratory in Albuquerque, New Mexico, to be... warranted by the evaluation, is as follows: Facility: Sandia National Laboratory. Location: Albuquerque,...

  5. Hierarchical manifold learning.

    Science.gov (United States)

    Bhatia, Kanwal K; Rao, Anil; Price, Anthony N; Wolz, Robin; Hajnal, Jo; Rueckert, Daniel

    2012-01-01

    We present a novel method of hierarchical manifold learning which aims to automatically discover regional variations within images. This involves constructing manifolds in a hierarchy of image patches of increasing granularity, while ensuring consistency between hierarchy levels. We demonstrate its utility in two very different settings: (1) to learn the regional correlations in motion within a sequence of time-resolved images of the thoracic cavity; (2) to find discriminative regions of 3D brain images in the classification of neurodegenerative disease,

  6. Hierarchically Structured Electrospun Fibers

    Directory of Open Access Journals (Sweden)

    Nicole E. Zander

    2013-01-01

    Full Text Available Traditional electrospun nanofibers have a myriad of applications ranging from scaffolds for tissue engineering to components of biosensors and energy harvesting devices. The generally smooth one-dimensional structure of the fibers has stood as a limitation to several interesting novel applications. Control of fiber diameter, porosity and collector geometry will be briefly discussed, as will more traditional methods for controlling fiber morphology and fiber mat architecture. The remainder of the review will focus on new techniques to prepare hierarchically structured fibers. Fibers with hierarchical primary structures—including helical, buckled, and beads-on-a-string fibers, as well as fibers with secondary structures, such as nanopores, nanopillars, nanorods, and internally structured fibers and their applications—will be discussed. These new materials with helical/buckled morphology are expected to possess unique optical and mechanical properties with possible applications for negative refractive index materials, highly stretchable/high-tensile-strength materials, and components in microelectromechanical devices. Core-shell type fibers enable a much wider variety of materials to be electrospun and are expected to be widely applied in the sensing, drug delivery/controlled release fields, and in the encapsulation of live cells for biological applications. Materials with a hierarchical secondary structure are expected to provide new superhydrophobic and self-cleaning materials.

  7. Hierarchical video summarization

    Science.gov (United States)

    Ratakonda, Krishna; Sezan, M. Ibrahim; Crinon, Regis J.

    1998-12-01

    We address the problem of key-frame summarization of vide in the absence of any a priori information about its content. This is a common problem that is encountered in home videos. We propose a hierarchical key-frame summarization algorithm where a coarse-to-fine key-frame summary is generated. A hierarchical key-frame summary facilitates multi-level browsing where the user can quickly discover the content of the video by accessing its coarsest but most compact summary and then view a desired segment of the video with increasingly more detail. At the finest level, the summary is generated on the basis of color features of video frames, using an extension of a recently proposed key-frame extraction algorithm. The finest level key-frames are recursively clustered using a novel pairwise K-means clustering approach with temporal consecutiveness constraint. We also address summarization of MPEG-2 compressed video without fully decoding the bitstream. We also propose efficient mechanisms that facilitate decoding the video when the hierarchical summary is utilized in browsing and playback of video segments starting at selected key-frames.

  8. The Application of Instructional Design in the National Open University of the Republic of China

    Directory of Open Access Journals (Sweden)

    Bosco Wen-Ruey Lee

    1988-03-01

    Full Text Available 無Designing instruction through the systematic approach is a way to assure the efficiency and the effectiveness of teaching and learning. Since the institute was established in August 1986, the National Open University of R.O.C. has adapted this concept into her system. Experts in the university developed an eight-step model for the carrying out of this instructional design concept. Main tasks to be executed at each step are clearly identified and stated in this model. Each member of the course design team, which includes the subject matter experts, the instructional designer, the media specialist, and the team assistant, follows this model to perform his or her duties. In the past years, this ID model has been widely applied to all NOU courses. Though, many difficulties and problems encountered, it is leading the instructions of the National Open University up to the goal of efficiency and effectiveness.

  9. The design of Fe, N-doped hierarchically porous carbons as highly active and durable electrocatalysts for a Zn-air battery.

    Science.gov (United States)

    Wu, Mingjie; Tang, Qiaowei; Dong, Fang; Wang, Yongzhen; Li, Donghui; Guo, Qinping; Liu, Yuyu; Qiao, Jinli

    2016-07-28

    A new type of Fe, N-doped hierarchically porous carbons (N-Fe-HPCs) has been synthesized via a cost-effective synthetic route, derived from nitrogen-enriched polyquaternium networks by combining a simple silicate templated two-step graphitization of the impregnated carbon. The as-prepared N-Fe-HPCs present a high catalytic activity for the oxygen reduction reaction (ORR) with onset and half-wave potentials of 0.99 and 0.86 V in 0.1 M KOH, respectively, which are superior to commercially available Pt/C catalyst (half-wave potential 0.86 V vs. RHE). Surprisingly, the diffusion-limited current density of N-S-HPCs approaches ∼7.5 mA cm(-2), much higher than that of Pt/C (∼5.5 mA cm(-2)). As a cathode electrode material used in Zn-air batteries, the unique configuration of the N-Fe-HPCs delivers a high discharge peak power density reaching up to 540 mW cm(-2) with a current density of 319 mA cm(-2) at 1.0 V of cell voltage and an energy density >800 Wh kg(-1). Additionally, outstanding ORR durability of the N-Fe-HPCs is demonstrated, as evaluated by the transient cell-voltage behavior of the Zn-air battery retaining an open circuit voltage of 1.48 V over 10 hours with a discharge current density of 100 mA cm(-2).

  10. 76 FR 76048 - Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards

    Science.gov (United States)

    2011-12-06

    ... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 81 RIN 2060-AR17 Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards Correction In rule document 2011-29460 appearing on pages 72097-72120 in the issues of...

  11. 77 FR 60177 - Unblocking of Two Specially Designated Nationals and Blocked Persons Pursuant to Executive Order

    Science.gov (United States)

    2012-10-02

    ... Office of Foreign Assets Control Unblocking of Two Specially Designated Nationals and Blocked Persons...: The Treasury Department's Office of Foreign Assets Control (``OFAC'') is publishing the names of two... are available from OFAC's web site ( www.treasury.gov/ofac ) or via facsimile through a 24-hour fax-on...

  12. Assessing the open method of coordination: institutional design and national influence of EU social policy coordination

    NARCIS (Netherlands)

    Barcevičius, E.; Weishaupt, J.T.; Zeitlin, J.

    2014-01-01

    Based on the findings of a large-scale, comparative research project, this book systematically assesses the institutional design and national influence of the Open Method of Coordination (OMC) on Social Inclusion and Social Protection, at the European Union (EU) level and in ten EU Member States.

  13. Good Practice in Designing and Implementing National Monitoring Systems for Adaptation to Climate Change

    DEFF Research Database (Denmark)

    Naswa, Prakriti; Trærup, Sara Lærke Meltofte; Bouroncle, Claudia

    In this report, we identify, analyse and compare international good practices in the design and implementation of national monitoring and evaluating indicator systems for climate change adaptation. This first chapter provides an introduction to the context and key terminology in the domain...

  14. A Case Study of MOOCs Design and Administration at Seoul National University

    Science.gov (United States)

    Lim, Cheolil; Kim, Sunyoung; Kim, Mihwa; Han, Songlee; Seo, Seungil

    2014-01-01

    This research, based on the case study of edX at Seoul National University, which is running Korea's first Massive Open Online Courses (MOOCs), discussed and proposed the roles of principal facilitators, the process, and the relationships among various facilitators in selecting, designing, opening and administrating MOOCs classes. Researches on…

  15. Application of Hierarchical Bilevel Framework of MDO Methodology to AUV Design Optimization%两层分级多学科设计框架在AUV的总体设计中的应用

    Institute of Scientific and Technical Information of China (English)

    刘蔚; 苟鹏; 操安喜; 崔维成

    2006-01-01

    将多学科优化方法作为一种新的设计方法应用于AUV的总体性能优化设计中.文中构建顶层控制系统层和并行独立子系统底层的两层分级的多学科优化设计框架,来实现AUV总体设计的有效载荷部分长度和推进力最大化和总重量最小化等的多个设计目标.使用的设计工具为商业软件iSIGHT和Fortran.%Multidisciplinary optimization design (MDO) is presented for an autonomous underwater vehicle (AUV) design as a new approach of general performance optimization. The framework of MDO introduced in this paper is bilevel and hierarchical, which is the high controlling system level and low level of parallel individual subsystems. The methodology is suitable to maximize the payload length and thrust force of AUV and minimize its gross weight.The tools of commercial software iSIGHT and Fortran are used to realize MDO design of AUV.

  16. Test Results From The Idaho National Laboratory Of The NASA Bi-Supported Cell Design

    Energy Technology Data Exchange (ETDEWEB)

    C Stoots; J O' Brien; T Cable

    2009-11-01

    The Idaho National Laboratory has been researching the application of solid-oxide fuel cell technology for large-scale hydrogen production. As a result, the Idaho National Laboratory has been testing various cell designs to characterize electrolytic performance. NASA, in conjunction with the University of Toledo, has developed a new cell concept with the goals of reduced weight and high power density. This paper presents results of the INL's testing of this new solid oxide cell design as an electrolyzer. Gas composition, operating voltage, and other parameters were varied during testing. Results to date show the NASA cell to be a promising design for both high power-to-weight fuel cell and electrolyzer applications.

  17. Detecting Hierarchical Structure in Networks

    DEFF Research Database (Denmark)

    Herlau, Tue; Mørup, Morten; Schmidt, Mikkel Nørgaard;

    2012-01-01

    a generative Bayesian model that is able to infer whether hierarchies are present or not from a hypothesis space encompassing all types of hierarchical tree structures. For efficient inference we propose a collapsed Gibbs sampling procedure that jointly infers a partition and its hierarchical structure......Many real-world networks exhibit hierarchical organization. Previous models of hierarchies within relational data has focused on binary trees; however, for many networks it is unknown whether there is hierarchical structure, and if there is, a binary tree might not account well for it. We propose....... On synthetic and real data we demonstrate that our model can detect hierarchical structure leading to better link-prediction than competing models. Our model can be used to detect if a network exhibits hierarchical structure, thereby leading to a better comprehension and statistical account the network....

  18. Context updates are hierarchical

    Directory of Open Access Journals (Sweden)

    Anton Karl Ingason

    2016-10-01

    Full Text Available This squib studies the order in which elements are added to the shared context of interlocutors in a conversation. It focuses on context updates within one hierarchical structure and argues that structurally higher elements are entered into the context before lower elements, even if the structurally higher elements are pronounced after the lower elements. The crucial data are drawn from a comparison of relative clauses in two head-initial languages, English and Icelandic, and two head-final languages, Korean and Japanese. The findings have consequences for any theory of a dynamic semantics.

  19. Plan for the design, development, and implementation, and operation of the National Water Information System

    Science.gov (United States)

    Edwards, M.D.

    1987-01-01

    The Water Resources Division of the U.S. Geological Survey is developing a National Water Information System (NWIS) that will integrate and replace its existing water data and information systems of the National Water Data Storage and Retrieval System, National Water Data Exchange, National Water-Use Information, and Water Resources Scientific Information Center programs. It will be a distributed data system operated as part of the Division 's Distributed Information System, which is a network of computers linked together through a national telecommunication network known as GEONET. The NWIS is being developed as a series of prototypes that will be integrated as they are completed to allow the development and implementation of the system in a phased manner. It also is being developed in a distributed manner using personnel who work under the coordination of a central NWIS Project Office. Work on the development of the NWIS began in 1983 and it is scheduled for completion in 1990. This document presents an overall plan for the design, development, implementation, and operation of the system. Detailed discussions are presented on each of these phases of the NWIS life cycle. The planning, quality assurance, and configuration management phases of the life cycle also are discussed. The plan is intended to be a working document for use by NWIS management and participants in its design and development and to assist offices of the Division in planning and preparing for installation and operation of the system. (Author 's abstract)

  20. Design and construction of models for the National Transonic Facility, part 1

    Science.gov (United States)

    Young, C. P., Jr.

    1985-01-01

    The design and construction of models for the National Transonic Facility (NTF) has resulted in significant technology developments in many areas. This lecture covers the development of design criteria and major research and development work that has contributed to the successful design and fabrication models for testing at full scale Reynolds number the NTF. Emphasis is placed on the materials aspect of the design and fabrication proces, including metallic materials, mechanical properties characterization, new steel alloy development, fracture toughness enhancement, and identification of fillers and solders suitable for use in cryogenic models. Quantitative data are provided which will be of value to the potential user of NTF or for application to the design and fabrication of model systems for other cryogenic wind tunnels.

  1. Design and construction of models for the National Transonic Facility, part 2

    Science.gov (United States)

    Young, C. P., Jr.

    1985-01-01

    This lecture presents the results of fastener load and retention systems tests which were carried out as a part of the cryogenic models technology development program a the NASA Langley Research Center (LaRC). Various design concepts for the National Transonic Facility (NTF) developmental and production models are discussed. A number of NTF models are described with emphasis on materials used, uniqueness of design and design drivers. Design and fabrication experience is presented in terms of the primary thermal and mechanical considerations required for design as well as fabrication. Cost considerations are addressed in terms of factors influencing costs for NTF models and cost data comparisons which are taken from both NASA Langley and industry experience.

  2. Design of the opacity spectrometer for opacity measurements at the National Ignition Facility

    Science.gov (United States)

    Ross, P. W.; Heeter, R. F.; Ahmed, M. F.; Dodd, E.; Huffman, E. J.; Liedahl, D. A.; King, J. A.; Opachich, Y. P.; Schneider, M. B.; Perry, T. S.

    2016-11-01

    Recent experiments at the Sandia National Laboratory Z facility have called into question models used in calculating opacity, of importance for modeling stellar interiors. An effort is being made to reproduce these results at the National Ignition Facility (NIF). These experiments require a new X-ray opacity spectrometer (OpSpec) spanning 540 eV-2100 eV with a resolving power E/ΔE > 700. The design of the OpSpec is presented. Photometric calculations based on expected opacity data are also presented. First use on NIF is expected in September 2016.

  3. 论生态取向教师学习内容的层级设计%On the Hierarchical Design of Teachers' Learning Content of Ecological Orientation

    Institute of Scientific and Technical Information of China (English)

    肖正德

    2011-01-01

    根据生态位原理,生态取向教师学习内容的层级设计是满足不同类别、不同层级教师需求的多样性设计,是促使教师学习、工作与生活融合一体的持续性设计,是促使教师同伴互助共生发展的互动性设计,是源于教师生命发展需要、提升教师幸福感的生命化设计。生态取向的教师学习应该以教师发展的层级理论为依据,视其发展层级,为其可持续发展设计层级学习内容框架。%According to the niche theory, the hierarehical design of teachers' learning content of ecological orientation is the diverse design to meet the needs of different classes and levels of teachers, which is not only the sustainahle design to promote the integration of teachers' learning, work and life, the interactive design to promote common development of the teachers of mutual companion, hut also the life design resulted from the needs of the intergrowth of teachers' development and the enhancement of teachers' sense of happiness. Teachers' learning of ecological orientation should be based on the theory of the hierarchy of teachers' development, and the framework of the level of learning contents should be designed according to the level of teachers' development, and catered for the teachers' sustainable development.

  4. Modular, Hierarchical Learning By Artificial Neural Networks

    Science.gov (United States)

    Baldi, Pierre F.; Toomarian, Nikzad

    1996-01-01

    Modular and hierarchical approach to supervised learning by artificial neural networks leads to neural networks more structured than neural networks in which all neurons fully interconnected. These networks utilize general feedforward flow of information and sparse recurrent connections to achieve dynamical effects. The modular organization, sparsity of modular units and connections, and fact that learning is much more circumscribed are all attractive features for designing neural-network hardware. Learning streamlined by imitating some aspects of biological neural networks.

  5. A note on hierarchical hubbing for a generalization of the VPN problem

    NARCIS (Netherlands)

    Olver, N.K.

    2014-01-01

    Robust network design refers to a class of optimization problems that occur when designing networks to efficiently handle variable demands. The notion of "hierarchical hubbing" was introduced (in the narrow context of a specific robust network design question), by Olver and Shepherd [2010]. Hierarch

  6. 77 FR 65310 - Additional Air Quality Designations for the 2006 24-Hour Fine Particle National Ambient Air...

    Science.gov (United States)

    2012-10-26

    ... Ambient Air Quality Standards AGENCY: Environmental Protection Agency (EPA). ACTION: Supplemental... particle (PM 2.5 ) national ambient air quality standards (NAAQS) air quality designations for the Ak-Chin... Federal Register NAAQS National Ambient Air Quality Standards NTTAA National Technology...

  7. 77 FR 50469 - Notice of Public Workshop: “Designing for Impact III: Workshop on Building the National Network...

    Science.gov (United States)

    2012-08-21

    ...: Workshop on Building the National Network for Manufacturing Innovation'' AGENCY: Advanced Manufacturing... entitled ``Designing for Impact: Workshop on Building the National Network for Manufacturing Innovation... proposed building a national network consisting of up to 15 IMIs. On December 15, 2011, Commerce...

  8. National Registry of Designated Intractable Diseases in Japan: Present Status and Future Prospects

    Science.gov (United States)

    KANATANI, Yasuhiro; TOMITA, Naoko; SATO, Yoko; ETO, Akiko; OMOE, Hiroe; MIZUSHIMA, Hiroshi

    2017-01-01

    Japan promotes research related to intractable diseases and financially supports patients with these diseases. Intractable diseases are designated as those that fulfill the following criteria: (1) rarity (affecting less than 0.1% of the population in Japan), (2) unknown etiology, (3) lack of effective treatment, (4) necessity of long-term treatment, and (5) existence of objective diagnostic criteria and not necessarily equal to rare diseases in other countries. The construction of a national database is required to promote research to clarify the pathogenesis of these diseases and to develop pharmaceutical products and medical devices. The Ministry of Health, Labor, and Welfare launched an online registration system in 2001, but many problems associated with gathering and utilizing information on patients with intractable diseases remain. In this paper, we describe the present status of the national registry of designated intractable diseases in Japan and discuss future prospects. PMID:27666154

  9. Design demonstrations for category B tank systems at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    1994-11-01

    This document presents design demonstrations conducted of liquid low-level waste (LLLW) storage tank systems located at the Oak Ridge National Laboratory (ORNL). Demonstration of the design of these tank systems has been stipulated by the Federal Facility Agreement (FFA) between the US Environmental Protection Agency (EPA)-Region IV; the Tennessee Department of Environment and Conservation (TDEC); and the DOE. The FFA establishes four categories of tanks. These are: Category A -- New or replacement tank systems with secondary containment; Category B -- Existing tank systems with secondary containment; Category C -- Existing tank systems without secondary containment; Category D -- Existing tank systems without secondary containment that are removed from service. This document provides a design demonstration of the secondary containment and ancillary equipment of 11 tank systems listed in the FFA as Category B. The design demonstration for each tank is presented.

  10. 76 FR 64948 - Decision To Evaluate a Petition To Designate a Class of Employees From Oak Ridge National...

    Science.gov (United States)

    2011-10-19

    ... Ridge, Tennessee. Job Titles and/or Job Duties: All contractor employees, subcontractor employees, and... HUMAN SERVICES Decision To Evaluate a Petition To Designate a Class of Employees From Oak Ridge National... designate a class of employees from Oak Ridge National Laboratory (X-10), Oak Ridge, Tennessee, to be...

  11. Design for mosquito abundance, diversity, and phenology sampling within the National Ecological Observatory Network

    Science.gov (United States)

    Hoekman, D.; Springer, Yuri P; Barker, C.M.; Barrera, R.; Blackmore, M.S.; Bradshaw, W.E.; Foley, D. H.; Ginsberg, Howard; Hayden, M. H.; Holzapfel, C. M.; Juliano, S. A.; Kramer, L. D.; LaDeau, S. L.; Livdahl, T. P.; Moore, C. G.; Nasci, R.S.; Reisen, W.K.; Savage, H. M.

    2016-01-01

    The National Ecological Observatory Network (NEON) intends to monitor mosquito populations across its broad geographical range of sites because of their prevalence in food webs, sensitivity to abiotic factors and relevance for human health. We describe the design of mosquito population sampling in the context of NEON’s long term continental scale monitoring program, emphasizing the sampling design schedule, priorities and collection methods. Freely available NEON data and associated field and laboratory samples, will increase our understanding of how mosquito abundance, demography, diversity and phenology are responding to land use and climate change.

  12. Design of a new electron cyclotron resonance ion source at Oshima National College of Maritime Technology

    Energy Technology Data Exchange (ETDEWEB)

    Asaji, T., E-mail: asaji@oshima-k.ac.jp; Hirabara, N.; Izumihara, T.; Nakamizu, T.; Ohba, T.; Nakamura, T.; Furuse, M. [Oshima National College of Maritime Technology (OCMT), 1091-1 Komatsu, Suo-oshima, Yamaguchi 742-2193 (Japan); Hitobo, T. [Tateyama Machine Co., Ltd., 30 Shimonoban, Toyama 930-1305 (Japan); Kato, Y. [Graduate School of Engineering, Osaka University, 2-1 Yamada-oka, Suita, Osaka 565-0871 (Japan)

    2014-02-15

    A new electron cyclotron resonance ion/plasma source has been designed and will be built at Oshima National College of Maritime Technology by early 2014. We have developed an ion source that allows the control of the plasma parameters over a wide range of electron temperatures for material research. A minimum-B magnetic field composed of axial mirror fields and radial cusp fields was designed using mainly Nd-Fe-B permanent magnets. The axial magnetic field can be varied by three solenoid coils. The apparatus has 2.45 GHz magnetron and 2.5–6.0 GHz solid-state microwave sources.

  13. A Hierarchical Sensor Network Based on Voronoi Diagram

    Institute of Scientific and Technical Information of China (English)

    SHANG Rui-qiang; ZHAO Jian-li; SUN Qiu-xia; WANG Guang-xing

    2006-01-01

    A hierarchical sensor network is proposed which places the sensing and routing capacity at different layer nodes.It thus simplifies the hardware design and reduces cost. Adopting Voronoi diagram in the partition of backbone network,a mathematical model of data aggregation based on hierarchical architecture is given. Simulation shows that the number of transmission data packages is sharply cut down in the network, thus reducing the needs in the bandwidth and energy resources and is thus well adapted to sensor networks.

  14. Hierarchical partial order ranking.

    Science.gov (United States)

    Carlsen, Lars

    2008-09-01

    Assessing the potential impact on environmental and human health from the production and use of chemicals or from polluted sites involves a multi-criteria evaluation scheme. A priori several parameters are to address, e.g., production tonnage, specific release scenarios, geographical and site-specific factors in addition to various substance dependent parameters. Further socio-economic factors may be taken into consideration. The number of parameters to be included may well appear to be prohibitive for developing a sensible model. The study introduces hierarchical partial order ranking (HPOR) that remedies this problem. By HPOR the original parameters are initially grouped based on their mutual connection and a set of meta-descriptors is derived representing the ranking corresponding to the single groups of descriptors, respectively. A second partial order ranking is carried out based on the meta-descriptors, the final ranking being disclosed though average ranks. An illustrative example on the prioritization of polluted sites is given.

  15. Trees and Hierarchical Structures

    CERN Document Server

    Haeseler, Arndt

    1990-01-01

    The "raison d'etre" of hierarchical dustering theory stems from one basic phe­ nomenon: This is the notorious non-transitivity of similarity relations. In spite of the fact that very often two objects may be quite similar to a third without being that similar to each other, one still wants to dassify objects according to their similarity. This should be achieved by grouping them into a hierarchy of non-overlapping dusters such that any two objects in ~ne duster appear to be more related to each other than they are to objects outside this duster. In everyday life, as well as in essentially every field of scientific investigation, there is an urge to reduce complexity by recognizing and establishing reasonable das­ sification schemes. Unfortunately, this is counterbalanced by the experience of seemingly unavoidable deadlocks caused by the existence of sequences of objects, each comparatively similar to the next, but the last rather different from the first.

  16. Optimisation by hierarchical search

    Science.gov (United States)

    Zintchenko, Ilia; Hastings, Matthew; Troyer, Matthias

    2015-03-01

    Finding optimal values for a set of variables relative to a cost function gives rise to some of the hardest problems in physics, computer science and applied mathematics. Although often very simple in their formulation, these problems have a complex cost function landscape which prevents currently known algorithms from efficiently finding the global optimum. Countless techniques have been proposed to partially circumvent this problem, but an efficient method is yet to be found. We present a heuristic, general purpose approach to potentially improve the performance of conventional algorithms or special purpose hardware devices by optimising groups of variables in a hierarchical way. We apply this approach to problems in combinatorial optimisation, machine learning and other fields.

  17. How hierarchical is language use?

    Science.gov (United States)

    Frank, Stefan L.; Bod, Rens; Christiansen, Morten H.

    2012-01-01

    It is generally assumed that hierarchical phrase structure plays a central role in human language. However, considerations of simplicity and evolutionary continuity suggest that hierarchical structure should not be invoked too hastily. Indeed, recent neurophysiological, behavioural and computational studies show that sequential sentence structure has considerable explanatory power and that hierarchical processing is often not involved. In this paper, we review evidence from the recent literature supporting the hypothesis that sequential structure may be fundamental to the comprehension, production and acquisition of human language. Moreover, we provide a preliminary sketch outlining a non-hierarchical model of language use and discuss its implications and testable predictions. If linguistic phenomena can be explained by sequential rather than hierarchical structure, this will have considerable impact in a wide range of fields, such as linguistics, ethology, cognitive neuroscience, psychology and computer science. PMID:22977157

  18. How hierarchical is language use?

    Science.gov (United States)

    Frank, Stefan L; Bod, Rens; Christiansen, Morten H

    2012-11-22

    It is generally assumed that hierarchical phrase structure plays a central role in human language. However, considerations of simplicity and evolutionary continuity suggest that hierarchical structure should not be invoked too hastily. Indeed, recent neurophysiological, behavioural and computational studies show that sequential sentence structure has considerable explanatory power and that hierarchical processing is often not involved. In this paper, we review evidence from the recent literature supporting the hypothesis that sequential structure may be fundamental to the comprehension, production and acquisition of human language. Moreover, we provide a preliminary sketch outlining a non-hierarchical model of language use and discuss its implications and testable predictions. If linguistic phenomena can be explained by sequential rather than hierarchical structure, this will have considerable impact in a wide range of fields, such as linguistics, ethology, cognitive neuroscience, psychology and computer science.

  19. Associative Hierarchical Random Fields.

    Science.gov (United States)

    Ladický, L'ubor; Russell, Chris; Kohli, Pushmeet; Torr, Philip H S

    2014-06-01

    This paper makes two contributions: the first is the proposal of a new model-The associative hierarchical random field (AHRF), and a novel algorithm for its optimization; the second is the application of this model to the problem of semantic segmentation. Most methods for semantic segmentation are formulated as a labeling problem for variables that might correspond to either pixels or segments such as super-pixels. It is well known that the generation of super pixel segmentations is not unique. This has motivated many researchers to use multiple super pixel segmentations for problems such as semantic segmentation or single view reconstruction. These super-pixels have not yet been combined in a principled manner, this is a difficult problem, as they may overlap, or be nested in such a way that the segmentations form a segmentation tree. Our new hierarchical random field model allows information from all of the multiple segmentations to contribute to a global energy. MAP inference in this model can be performed efficiently using powerful graph cut based move making algorithms. Our framework generalizes much of the previous work based on pixels or segments, and the resulting labelings can be viewed both as a detailed segmentation at the pixel level, or at the other extreme, as a segment selector that pieces together a solution like a jigsaw, selecting the best segments from different segmentations as pieces. We evaluate its performance on some of the most challenging data sets for object class segmentation, and show that this ability to perform inference using multiple overlapping segmentations leads to state-of-the-art results.

  20. Modeling hierarchical structures - Hierarchical Linear Modeling using MPlus

    CERN Document Server

    Jelonek, M

    2006-01-01

    The aim of this paper is to present the technique (and its linkage with physics) of overcoming problems connected to modeling social structures, which are typically hierarchical. Hierarchical Linear Models provide a conceptual and statistical mechanism for drawing conclusions regarding the influence of phenomena at different levels of analysis. In the social sciences it is used to analyze many problems such as educational, organizational or market dilemma. This paper introduces the logic of modeling hierarchical linear equations and estimation based on MPlus software. I present my own model to illustrate the impact of different factors on school acceptation level.

  1. Resilient 3D hierarchical architected metamaterials.

    Science.gov (United States)

    Meza, Lucas R; Zelhofer, Alex J; Clarke, Nigel; Mateos, Arturo J; Kochmann, Dennis M; Greer, Julia R

    2015-09-15

    Hierarchically designed structures with architectural features that span across multiple length scales are found in numerous hard biomaterials, like bone, wood, and glass sponge skeletons, as well as manmade structures, like the Eiffel Tower. It has been hypothesized that their mechanical robustness and damage tolerance stem from sophisticated ordering within the constituents, but the specific role of hierarchy remains to be fully described and understood. We apply the principles of hierarchical design to create structural metamaterials from three material systems: (i) polymer, (ii) hollow ceramic, and (iii) ceramic-polymer composites that are patterned into self-similar unit cells in a fractal-like geometry. In situ nanomechanical experiments revealed (i) a nearly theoretical scaling of structural strength and stiffness with relative density, which outperforms existing nonhierarchical nanolattices; (ii) recoverability, with hollow alumina samples recovering up to 98% of their original height after compression to ≥ 50% strain; (iii) suppression of brittle failure and structural instabilities in hollow ceramic hierarchical nanolattices; and (iv) a range of deformation mechanisms that can be tuned by changing the slenderness ratios of the beams. Additional levels of hierarchy beyond a second order did not increase the strength or stiffness, which suggests the existence of an optimal degree of hierarchy to amplify resilience. We developed a computational model that captures local stress distributions within the nanolattices under compression and explains some of the underlying deformation mechanisms as well as validates the measured effective stiffness to be interpreted as a metamaterial property.

  2. Elements of a pragmatic approach for dealing with bias and uncertainty in experiments through predictions : experiment design and data conditioning; %22real space%22 model validation and conditioning; hierarchical modeling and extrapolative prediction.

    Energy Technology Data Exchange (ETDEWEB)

    Romero, Vicente Jose

    2011-11-01

    This report explores some important considerations in devising a practical and consistent framework and methodology for utilizing experiments and experimental data to support modeling and prediction. A pragmatic and versatile 'Real Space' approach is outlined for confronting experimental and modeling bias and uncertainty to mitigate risk in modeling and prediction. The elements of experiment design and data analysis, data conditioning, model conditioning, model validation, hierarchical modeling, and extrapolative prediction under uncertainty are examined. An appreciation can be gained for the constraints and difficulties at play in devising a viable end-to-end methodology. Rationale is given for the various choices underlying the Real Space end-to-end approach. The approach adopts and refines some elements and constructs from the literature and adds pivotal new elements and constructs. Crucially, the approach reflects a pragmatism and versatility derived from working many industrial-scale problems involving complex physics and constitutive models, steady-state and time-varying nonlinear behavior and boundary conditions, and various types of uncertainty in experiments and models. The framework benefits from a broad exposure to integrated experimental and modeling activities in the areas of heat transfer, solid and structural mechanics, irradiated electronics, and combustion in fluids and solids.

  3. The Design and Implementation of University Hierarchical Course Scheduling System Based on WEB%基于WEB的高校分级排课系统设计与实现

    Institute of Scientific and Technical Information of China (English)

    张海涛; 饶志坚; 李俊杰; 高泉; 邢晓庆

    2014-01-01

    Course scheduling is an important work ensuring the normal order of teaching in universities, but the algorithm of con-flict detection is complex with heavy tasks, so the C/S structure is adopted in most of the present course scheduling systems. This article interprets the main principles of using .NET technology and scheduling courses in universities, designs and achieves a u-niversity hierarchical course scheduling system based on WEB, and proposes a more efficient binary system conflict detection al-gorithm for course scheduling. This system has been working well in Yunnan Agricultural University and the practice effect is im-pressive.%排课是高校能否保证教学有序进行的一项重要工作,冲突检测算法复杂,任务繁重,目前多数排课系统的实现采用C/S结构。本文主要阐述运用.NET技术和高校排课的主要原则,设计并实现了基于WEB的校院分级排课系统,同时还提出了更高效的二进制占位排课冲突检测算法。系统在云南农业大学排课过程中得到实际运行,实践效果较好。

  4. Design and application of dynamic allocation scheme for business based on hierarchical control%基于分层控制的业务动态分配方案设计与应用

    Institute of Scientific and Technical Information of China (English)

    李竹林; 马燕

    2012-01-01

    现代企业人员层级制度分明,工作任务分工细致,业务分配机制的灵活性至关重要.因此如何达到业务分配的灵活性和动态性是必须解决的问题.文中提出了一种基于用户角色和所属部门的分层控制模型来实现企业的业务动态分配,并将其应用于采油厂原油生产管理系统中,取得了良好的应用效果.%Hierarchy of modern enterprise staff is clear, labor division is meticulous, and business distribution mechanism is flexible. These are important to an enterprise. So, how to achieve flexible and dynamic business distribution is a problem to be solved. This paper designs a hierarchical control model to realize dynamic allocation scheme of business based on departments and user roles, and uses it in the crude oil production management system. The application result shows the method is very good.

  5. Design and modeling of ignition targets for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Haan, S.W.; Pollaine, S.M.; Lindl, J.D.; Suter, L.J.; Berger, R.L.; Powers, L.V.; Alley, W.E.; Amendt, P.A.; Futterman, J.A.; Levedahl, W.K.; Rosen, M.D.; Rowley, D.P.; Sacks, R.A.; Shestakov, A.I.; Strobel, G.L.; Tabak, M.; Weber, S.V.; Zimmerman, G.B. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Krauser, W.J.; Wilson, D.C.; Coggeshall, S.V.; Harris, D.B.; Hoffman, N.M.; Wilde, B.H. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

    1995-06-01

    Several targets are described that in simulations give yields of 1--30 MJ when indirectly driven by 0.9--2 MJ of 0.35 {mu}m laser light. The article describes the targets, the modeling that was used to design them, and the modeling done to set specifications for the laser system in the proposed National Ignition Facility. Capsules with beryllium or polystyrene ablators are enclosed in gold hohlraums. All the designs utilize a cryogenic fuel layer; it is very difficult to achieve ignition at this scale with a noncryogenic capsule. It is necessary to use multiple bands of illumination in the hohlraum to achieve sufficiently uniform x-ray irradiation, and to use a low-{ital Z} gas fill in the hohlraum to reduce filling of the hohlraum with gold plasma. Critical issues are hohlraum design and optimization, Rayleigh--Taylor instability modeling, and laser--plasma interactions.

  6. Hierarchical Robot Control In A Multisensor Environment

    Science.gov (United States)

    Bhanu, Bir; Thune, Nils; Lee, Jih Kun; Thune, Mari

    1987-03-01

    Automatic recognition, inspection, manipulation and assembly of objects will be a common denominator in most of tomorrow's highly automated factories. These tasks will be handled by intelligent computer controlled robots with multisensor capabilities which contribute to desired flexibility and adaptability. The control of a robot in such a multisensor environment becomes of crucial importance as the complexity of the problem grows exponentially with the number of sensors, tasks, commands and objects. In this paper we present an approach which uses CAD (Computer-Aided Design) based geometric and functional models of objects together with action oriented neuroschemas to recognize and manipulate objects by a robot in a multisensor environment. The hierarchical robot control system is being implemented on a BBN Butterfly multi processor. Index terms: CAD, Hierarchical Control, Hypothesis Generation and Verification, Parallel Processing, Schemas

  7. Optimizd Design of Power Scheduling in WSN Based on Sink Root Data Tree with Hierarchical Clustering%Sink根数据聚集树分层的WSN电力调度优化设计

    Institute of Scientific and Technical Information of China (English)

    朱文忠

    2014-01-01

    为提高电力数据调度效率,缩短电力数据调度延时,提出一种改进的无通信冲突的分布式电力数据聚集调度近似算法,采用Sink根数据聚集树对无线传感器网络中各个节点电力资源数据进行分层数据调度,根据分布式数据集对各个电力节点之间的控制信息进行不断融合处理,在最大独立集的基础上建立一棵根在Sink的数据聚集树。每个节点分配一个时间片,使该节点能在无通信冲突的情况下传输数据。仿真实验表明,采用改进算法得到的聚集延时明显减小,有效保证了电力调度控制的实时性,电力信息数据分层融合度能达到90%以上,而改进前的算法只有10%~50%之间。%In order to improve the power data scheduling efficiency, shorten the power data scheduling delay, and improve matching and integration degree, and improved power scheduling optimization design method based on Sink root data tree hierarchical clustering was proposed for improve the management efficiency. We established a tree root in the Sink data ag-gregation tree based on the maximum independent set. Each node was assigned a time slice, so that the node could transmit data in the absence of communication conflict situations. Simulation results show that the improved algorithm has signifi-cantly reduced aggregation delay, and it has effectively ensured the real-time dispatching control, and the data hierarchical fusion degree can reach more than 90%, while the former algorithm is only 10%~50%.

  8. 层次化动态实时调度框架的设计与实现%Design and Realization of Hierarchical Dynamic Real-time Scheduling Framework

    Institute of Scientific and Technical Information of China (English)

    胡家义; 张激; 刘玲

    2013-01-01

    The development of embedded systems is facing new trends including variousness of usage scenarios, strict requirement for real-time feature, complexity of upper applications and assurance of strong robustness, demanding the advance of system safety by means of promoting embedded operating systems. Temporal isolation mechanism is an important part to improve the safety of system, proposing a hierarchical dynamic real-time scheduling framework to be the implementation of temporal isolation. This paper uses the homogeneity of task to generate task sets, which can be the basis of hierarchical framework for task partitioning;testifies the schedulable condition of the framework, designs the structure of scheduling algorithm and realizes the dynamic switching of scheduling algorithm. The simulation result and theoretical analysis indicate that the issued framework can improve the safety of system and dynamically adjust to the variation of system load while guaranteeing the stability of time complexity of context switch.%现有嵌入式系统具有应用场景多变、实时性要求严格、上层应用复杂、鲁棒性较强等特点,在嵌入式操作系统层面对系统防危性要求较高。时间隔离机制是提高系统防危性的重要组成部分,为此,提出一种将层次化动态实时调度框架作为时间隔离的实现策略。引入任务同质性的概念进行任务分划,将产生的任务集作为层次框架的基础,证明多层次框架下实时任务的可调度性条件,设计调度算法结构并实现调度算法的动态切换。仿真结果和理论分析表明,该调度框架在保证上下文切换时间复杂度稳定的前提下,可提高系统防危性并动态应对系统负载的变化。

  9. The design of the optical Thomson scattering diagnostic for the National Ignition Facility

    Science.gov (United States)

    Datte, P. S.; Ross, J. S.; Froula, D. H.; Daub, K. D.; Galbraith, J.; Glenzer, S.; Hatch, B.; Katz, J.; Kilkenny, J.; Landen, O.; Manha, D.; Manuel, A. M.; Molander, W.; Montgomery, D.; Moody, J.; Swadling, G. F.; Weaver, J.

    2016-11-01

    The National Ignition Facility (NIF) is a 192 laser beam facility designed to support the Stockpile Stewardship, High Energy Density and Inertial Confinement Fusion (ICF) programs. We report on the design of an Optical Thomson Scattering (OTS) diagnostic that has the potential to transform the community's understanding of NIF hohlraum physics by providing first principle, local, time-resolved measurements of under-dense plasma conditions. The system design allows operation with different probe laser wavelengths by manual selection of the appropriate beam splitter and gratings before the shot. A deep-UV probe beam (λ0-210 nm) will be used to optimize the scattered signal for plasma densities of 5 × 1020 electrons/cm3 while a 3ω probe will be used for experiments investigating lower density plasmas of 1 × 1019 electrons/cm3. We report the phase I design of a two phase design strategy. Phase I includes the OTS telescope, spectrometer, and streak camera; these will be used to assess the background levels at NIF. Phase II will include the design and installation of a probe laser.

  10. Methodology for CFD Design Analysis of National Launch System Nozzle Manifold

    Science.gov (United States)

    Haire, Scot L.

    1993-01-01

    The current design environment dictates that high technology CFD (Computational Fluid Dynamics) analysis produce quality results in a timely manner if it is to be integrated into the design process. The design methodology outlined describes the CFD analysis of an NLS (National Launch System) nozzle film cooling manifold. The objective of the analysis was to obtain a qualitative estimate for the flow distribution within the manifold. A complex, 3D, multiple zone, structured grid was generated from a 3D CAD file of the geometry. A Euler solution was computed with a fully implicit compressible flow solver. Post processing consisted of full 3D color graphics and mass averaged performance. The result was a qualitative CFD solution that provided the design team with relevant information concerning the flow distribution in and performance characteristics of the film cooling manifold within an effective time frame. Also, this design methodology was the foundation for a quick turnaround CFD analysis of the next iteration in the manifold design.

  11. Sandia National Laboratories Facilities Management and Operations Center Design Standards Manual

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Timothy L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-09-01

    At Sandia National Laboratories in New Mexico (SNL/NM), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/NM applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. The safety and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule. These design standards generally apply to all disciplines on all SNL/NM projects. Architectural and engineering design must be both functional and cost-effective. Facility design must be tailored to fit its intended function, while emphasizing low-maintenance, energy-efficient, and energy-conscious design. Design facilities that can be maintained easily, with readily accessible equipment areas, low maintenance, and quality systems. To promote an orderly and efficient appearance, architectural features of new facilities must complement and enhance the existing architecture at the site. As an Architectural and Engineering (A/E) professional, you must advise the Project Manager when this approach is prohibitively expensive. You are encouraged to use professional judgment and ingenuity to produce a coordinated interdisciplinary design that is cost-effective, easily contractible or buildable, high-performing, aesthetically pleasing, and compliant with applicable building codes. Close coordination and development of civil, landscape, structural, architectural, fire

  12. Rational design of hierarchically porous birnessite-type manganese dioxides nanosheets on different one-dimensional titania-based nanowires for high performance supercapacitors

    KAUST Repository

    Zhang, Yu Xin

    2014-12-01

    A facile and large-scale strategy of mesoporous birnessite-type manganese dioxide (MnO2) nanosheets on one-dimension (1D) H2Ti 3O7 and anatase/TiO2 (B) nanowires (NWs) is developed for high performance supercapacitors. The morphological characteristics of MnO2 nanoflakes on H2Ti 3O7 and anatase/TiO2 (B) NWs could be rationally designed with various characteristics (e.g., the sheet thickness, surface area). Interestingly, the MnO2/TiO2 NWs exhibit a more optimized electrochemical performance with specific capacitance of 120 F g-1 at current density of 0.1 A g-1 (based on MnO 2 + TiO2) than MnO2/H2Ti 3O7 NWs. An asymmetric supercapacitor of MnO 2/TiO2//activated graphene (AG) yields a better energy density of 29.8 Wh kg-1 than MnO2/H2Ti 3O7//AG asymmetric supercapacitor, while maintaining desirable cycling stability. Indeed, the pseudocapacitive difference is related to the substrates, unique structure and surface area. Especially, the anatase/TiO2 (B) mixed-phase system can provide good electronic conductivity and high utilization of MnO2 nanosheets. © 2014 Elsevier B.V. All rights reserved.

  13. Rational design of hierarchically porous birnessite-type manganese dioxides nanosheets on different one-dimensional titania-based nanowires for high performance supercapacitors

    Science.gov (United States)

    Zhang, Yu Xin; Kuang, Min; Hao, Xiao Dong; Liu, Yan; Huang, Ming; Guo, Xiao Long; Yan, Jing; Han, Gen Quan; Li, Jing

    2014-12-01

    A facile and large-scale strategy of mesoporous birnessite-type manganese dioxide (MnO2) nanosheets on one-dimension (1D) H2Ti3O7 and anatase/TiO2 (B) nanowires (NWs) is developed for high performance supercapacitors. The morphological characteristics of MnO2 nanoflakes on H2Ti3O7 and anatase/TiO2 (B) NWs could be rationally designed with various characteristics (e.g., the sheet thickness, surface area). Interestingly, the MnO2/TiO2 NWs exhibit a more optimized electrochemical performance with specific capacitance of 120 F g-1 at current density of 0.1 A g-1 (based on MnO2 + TiO2) than MnO2/H2Ti3O7 NWs. An asymmetric supercapacitor of MnO2/TiO2//activated graphene (AG) yields a better energy density of 29.8 Wh kg-1 than MnO2/H2Ti3O7//AG asymmetric supercapacitor, while maintaining desirable cycling stability. Indeed, the pseudocapacitive difference is related to the substrates, unique structure and surface area. Especially, the anatase/TiO2 (B) mixed-phase system can provide good electronic conductivity and high utilization of MnO2 nanosheets.

  14. Structural Testing at the NWTC Helps Improve Blade Design and Increase System Reliability; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-08-01

    Since 1990, the National Renewable Energy Laboratory’s (NREL's) National Wind Technology Center (NWTC) has tested more than 150 wind turbine blades. NWTC researchers can test full-scale and subcomponent articles, conduct data analyses, and provide engineering expertise on best design practices. Structural testing of wind turbine blades enables designers, manufacturers, and owners to validate designs and assess structural performance to specific load conditions. Rigorous structural testing can reveal design and manufacturing problems at an early stage of development that can lead to overall improvements in design and increase system reliability.

  15. Modeling hierarchical structures - Hierarchical Linear Modeling using MPlus

    OpenAIRE

    Jelonek, Magdalena

    2006-01-01

    The aim of this paper is to present the technique (and its linkage with physics) of overcoming problems connected to modeling social structures, which are typically hierarchical. Hierarchical Linear Models provide a conceptual and statistical mechanism for drawing conclusions regarding the influence of phenomena at different levels of analysis. In the social sciences it is used to analyze many problems such as educational, organizational or market dilemma. This paper introduces the logic of m...

  16. Modeling the deformation behavior of nanocrystalline alloy with hierarchical microstructures

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Hongxi; Zhou, Jianqiu, E-mail: zhouj@njtech.edu.cn [Nanjing Tech University, Department of Mechanical Engineering (China); Zhao, Yonghao, E-mail: yhzhao@njust.edu.cn [Nanjing University of Science and Technology, Nanostructural Materials Research Center, School of Materials Science and Engineering (China)

    2016-02-15

    A mechanism-based plasticity model based on dislocation theory is developed to describe the mechanical behavior of the hierarchical nanocrystalline alloys. The stress–strain relationship is derived by invoking the impeding effect of the intra-granular solute clusters and the inter-granular nanostructures on the dislocation movements along the sliding path. We found that the interaction between dislocations and the hierarchical microstructures contributes to the strain hardening property and greatly influence the ductility of nanocrystalline metals. The analysis indicates that the proposed model can successfully describe the enhanced strength of the nanocrystalline hierarchical alloy. Moreover, the strain hardening rate is sensitive to the volume fraction of the hierarchical microstructures. The present model provides a new perspective to design the microstructures for optimizing the mechanical properties in nanostructural metals.

  17. Enterprise System Design for RFID Enabled Supply Chains from Experience in Two National Projects

    Directory of Open Access Journals (Sweden)

    John P.T. Mo

    2009-10-01

    Full Text Available Two national demonstrator projects have been developed using global RFID standards to explore the suitability of this pervasive technology to the fast moving consumer goods supply chain. The projects show that RFID technology is still not reliable enough to produce advantages over traditional tracking technologies. This paper reviews the processes and gaps in these experiences, and assesses future research opportunities in this area. A system modelling approach is used to understand the relationships between different sub-systems in the enterprises of the supply chain and examine the enterprise processes that drive the activities in the national projects. Based on these analyses, an enterprise system model is proposed for designing future development of RFID based supply chains.

  18. The study design and characteristics of the Danish national health interview surveys

    DEFF Research Database (Denmark)

    Ekholm, Ola; Hesse, Ulrik; Davidsen, Michael;

    2009-01-01

    AIMS: The Danish National Institute of Public Health, University of Southern Denmark has carried out national representative health interview surveys among adult Danes in 1987, 1994, 2000 and 2005. The aim of this study is to describe the characteristics of the design, including the response rate...... to the Danish population. However, these surveys are essential, as the information collected cannot be gathered by means of official statistical registers. Hence, efforts to increase the response rate will be important in the forthcoming surveys....... of the four surveys. METHODS: The samples in 1987 and 1994 are based on simple random sampling. The samples in 2000 and 2005 are based on stratified random sampling. In addition, all invited to the survey in 1994 were re-invited in both 2000 and 2005. Data were collected via face-to-face interview...

  19. Determining visitors' dispositions toward the designation of a Greek National Park.

    Science.gov (United States)

    Machairas, Ioannis; Hovardas, Tasos

    2005-07-01

    This article presents the findings of the first major visitor survey conducted at the Central Rhodope Mountain Complex, situated in northern Greece. The study area is one of a number of sites planned to become National Parks under a recent initiative of the Greek government. We used a logistic regression method to define significant predictors of visitors' awareness and attitude toward park designation, as well as their willingness to pay a conditional entrance fee. Study findings demonstrated that the probability of being aware of the park designation initiative is higher for visitors who obtained information from travel agencies or media to make their destination choice, compared to visitors who resorted to word-of-mouth recommendations. Knowledge and attitudes toward animals living in the study area revealed a limited influence on visitors' dispositions toward park designation. The results of this study call for action to implement education programs for National Park users. These programs should aim at rendering the environmental characteristics of the Central Rhodope Mountain Complex to be significant predictors of visitors' dispositions toward the study area. This would favor its uniqueness as a destination, as well as contribute to its long-term economic sustainability.

  20. The reflection of hierarchical cluster analysis of co-occurrence matrices in SPSS

    NARCIS (Netherlands)

    Zhou, Q.; Leng, F.; Leydesdorff, L.

    2015-01-01

    Purpose: To discuss the problems arising from hierarchical cluster analysis of co-occurrence matrices in SPSS, and the corresponding solutions. Design/methodology/approach: We design different methods of using the SPSS hierarchical clustering module for co-occurrence matrices in order to compare the

  1. The reflection of hierarchical cluster analysis of co-occurrence matrices in SPSS

    NARCIS (Netherlands)

    Zhou, Q.; Leng, F.; Leydesdorff, L.

    2015-01-01

    Purpose: To discuss the problems arising from hierarchical cluster analysis of co-occurrence matrices in SPSS, and the corresponding solutions. Design/methodology/approach: We design different methods of using the SPSS hierarchical clustering module for co-occurrence matrices in order to compare

  2. Hierarchical fringe tracking

    CERN Document Server

    Petrov, Romain G; Boskri, Abdelkarim; Folcher, Jean-Pierre; Lagarde, Stephane; Bresson, Yves; Benkhaldoum, Zouhair; Lazrek, Mohamed; Rakshit, Suvendu

    2014-01-01

    The limiting magnitude is a key issue for optical interferometry. Pairwise fringe trackers based on the integrated optics concepts used for example in GRAVITY seem limited to about K=10.5 with the 8m Unit Telescopes of the VLTI, and there is a general "common sense" statement that the efficiency of fringe tracking, and hence the sensitivity of optical interferometry, must decrease as the number of apertures increases, at least in the near infrared where we are still limited by detector readout noise. Here we present a Hierarchical Fringe Tracking (HFT) concept with sensitivity at least equal to this of a two apertures fringe trackers. HFT is based of the combination of the apertures in pairs, then in pairs of pairs then in pairs of groups. The key HFT module is a device that behaves like a spatial filter for two telescopes (2TSF) and transmits all or most of the flux of a cophased pair in a single mode beam. We give an example of such an achromatic 2TSF, based on very broadband dispersed fringes analyzed by g...

  3. Hierarchical Reverberation Mapping

    CERN Document Server

    Brewer, Brendon J

    2013-01-01

    Reverberation mapping (RM) is an important technique in studies of active galactic nuclei (AGN). The key idea of RM is to measure the time lag $\\tau$ between variations in the continuum emission from the accretion disc and subsequent response of the broad line region (BLR). The measurement of $\\tau$ is typically used to estimate the physical size of the BLR and is combined with other measurements to estimate the black hole mass $M_{\\rm BH}$. A major difficulty with RM campaigns is the large amount of data needed to measure $\\tau$. Recently, Fine et al (2012) introduced a new approach to RM where the BLR light curve is sparsely sampled, but this is counteracted by observing a large sample of AGN, rather than a single system. The results are combined to infer properties of the sample of AGN. In this letter we implement this method using a hierarchical Bayesian model and contrast this with the results from the previous stacked cross-correlation technique. We find that our inferences are more precise and allow fo...

  4. The preliminary design of the optical Thomson scattering diagnostic for the National Ignition Facility

    Science.gov (United States)

    Datte, P.; Ross, J. S.; Froula, D.; Galbraith, J.; Glenzer, S.; Hatch, B.; Kilkenny, J.; Landen, O.; Manuel, A. M.; Molander, W.; Montgomery, D.; Moody, J.; Swadling, G.; Weaver, J.; Vergel de Dios, G.; Vitalich, M.

    2016-05-01

    The National Ignition Facility (NIF) is a 192 laser beam facility designed to support the Stockpile Stewardship, High Energy Density and Inertial Confinement Fusion programs. We report on the preliminary design of an Optical Thomson Scattering (OTS) diagnostic that has the potential to transform the community's understanding of NIF hohlraum physics by providing first principle, local, time-resolved measurements of under-dense plasma conditions. The system design allows operation with different probe laser wavelengths by manual selection of the appropriate beamsplitter and gratings before the shot. A deep-UV probe beam (λ0 between 185-215 nm) will optimally collect Thomson scattered light from plasma densities of 5 x 1020 electrons/cm3 while a 3ω probe will optimally collect Thomson scattered light from plasma densities of 1 x 1019 electrons/cm3. We report the phase I design of a two phase design strategy. Phase I includes the OTS recording system to measure background levels at NIF and phase II will include the integration of a probe laser.

  5. Design of the polar neutron-imaging aperture for use at the National Ignition Facility

    Science.gov (United States)

    Fatherley, V. E.; Barker, D. A.; Fittinghoff, D. N.; Hibbard, R. L.; Martinez, J. I.; Merrill, F. E.; Oertel, J. A.; Schmidt, D. W.; Volegov, P. L.; Wilde, C. H.

    2016-11-01

    The installation of a neutron imaging diagnostic with a polar view at the National Ignition Facility (NIF) required design of a new aperture, an extended pinhole array (PHA). This PHA is different from the pinhole array for the existing equatorial system due to significant changes in the alignment and recording systems. The complex set of component requirements, as well as significant space constraints in its intended location, makes the design of this aperture challenging. In addition, lessons learned from development of prior apertures mandate careful aperture metrology prior to first use. This paper discusses the PHA requirements, constraints, and the final design. The PHA design is complex due to size constraints, machining precision, assembly tolerances, and design requirements. When fully assembled, the aperture is a 15 mm × 15 mm × 200 mm tungsten and gold assembly. The PHA body is made from 2 layers of tungsten and 11 layers of gold. The gold layers include 4 layers containing penumbral openings, 4 layers containing pinholes and 3 spacer layers. In total, there are 64 individual, triangular pinholes with a field of view (FOV) of 200 μm and 6 penumbral apertures. Each pinhole is pointed to a slightly different location in the target plane, making the effective FOV of this PHA a 700 μm square in the target plane. The large FOV of the PHA reduces the alignment requirements both for the PHA and the target, allowing for alignment with a laser tracking system at NIF.

  6. High-Performance Cryogenic Designs for OMEGA and the National Ignition Facility

    Science.gov (United States)

    Goncharov, V. N.; Collins, T. J. B.; Marozas, J. A.; Regan, S. P.; Betti, R.; Boehly, T. R.; Campbell, E. M.; Froula, D. H.; Igumenshchev, I. V.; McCrory, R. L.; Myatt, J. F.; Radha, P. B.; Sangster, T. C.; Shvydky, A.

    2016-10-01

    The main advantage of laser symmetric direct drive (SDD) is a significantly higher coupled drive laser energy to the hot-spot internal energy at stagnation compared to that of laser indirect drive. Because of coupling losses resulting from cross-beam energy transfer (CBET), however, reaching ignition conditions on the NIF with SDD requires designs with excessively large in-flight aspect ratios ( 30). Results of cryogenic implosions performed on OMEGA show that such designs are unstable to short-scale nonuniformity growth during shell implosion. Several CBET reduction strategies have been proposed in the past. This talk will discuss high-performing designs using several CBET-mitigation techniques, including using drive laser beams smaller than the target size and wavelength detuning. Designs that are predicted to reach alpha burning regimes as well as a gain of 10 to 40 at the NIF-scale will be presented. Hydrodynamically scaled OMEGA designs with similar CBET-reduction techniques will also be discussed. This material is based upon work supported by the Department Of Energy National Nuclear Security Administration under Award Number DE-NA0001944.

  7. Design of the polar neutron-imaging aperture for use at the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Fatherley, V. E., E-mail: vef@lanl.gov; Martinez, J. I.; Merrill, F. E.; Oertel, J. A.; Schmidt, D. W.; Volegov, P. L.; Wilde, C. H. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Barker, D. A.; Fittinghoff, D. N.; Hibbard, R. L. [Lawrence Livermore National Laboratory, Livermore, California 94551-0808 (United States)

    2016-11-15

    The installation of a neutron imaging diagnostic with a polar view at the National Ignition Facility (NIF) required design of a new aperture, an extended pinhole array (PHA). This PHA is different from the pinhole array for the existing equatorial system due to significant changes in the alignment and recording systems. The complex set of component requirements, as well as significant space constraints in its intended location, makes the design of this aperture challenging. In addition, lessons learned from development of prior apertures mandate careful aperture metrology prior to first use. This paper discusses the PHA requirements, constraints, and the final design. The PHA design is complex due to size constraints, machining precision, assembly tolerances, and design requirements. When fully assembled, the aperture is a 15 mm × 15 mm × 200 mm tungsten and gold assembly. The PHA body is made from 2 layers of tungsten and 11 layers of gold. The gold layers include 4 layers containing penumbral openings, 4 layers containing pinholes and 3 spacer layers. In total, there are 64 individual, triangular pinholes with a field of view (FOV) of 200 μm and 6 penumbral apertures. Each pinhole is pointed to a slightly different location in the target plane, making the effective FOV of this PHA a 700 μm square in the target plane. The large FOV of the PHA reduces the alignment requirements both for the PHA and the target, allowing for alignment with a laser tracking system at NIF.

  8. Nearly Cyclic Pursuit and its Hierarchical variant for Multi-agent Systems

    DEFF Research Database (Denmark)

    Iqbal, Muhammad; Leth, John-Josef; Ngo, Trung Dung

    2015-01-01

    The rendezvous problem for multiple agents under nearly cyclic pursuit and hierarchical nearly cyclic pursuit is discussed in this paper. The control law designed under nearly cyclic pursuit strategy enables the agents to converge at a point dictated by a beacon. A hierarchical version of the nea......The rendezvous problem for multiple agents under nearly cyclic pursuit and hierarchical nearly cyclic pursuit is discussed in this paper. The control law designed under nearly cyclic pursuit strategy enables the agents to converge at a point dictated by a beacon. A hierarchical version...

  9. Preliminary Design of the Brazilian's National Institute for Space Research Broadband Radiometer for Solar Observations

    Science.gov (United States)

    Berni, L. A.; Vieira, L. E. A.; Savonov, G. S.; Dal Lago, A.; Mendes, O.; Silva, M. R.; Guarnieri, F.; Sampaio, M.; Barbosa, M. J.; Vilas Boas, J. V.; Branco, R. H. F.; Nishimori, M.; Silva, L. A.; Carlesso, F.; Rodríguez Gómez, J. M.; Alves, L. R.; Vaz Castilho, B.; Santos, J.; Silva Paula, A.; Cardoso, F.

    2017-10-01

    The Total Solar Irradiance (TSI), which is the total radiation arriving at Earth's atmosphere from the Sun, is one of the most important forcing of the Earths climate. Measurements of the TSI have been made employing instruments on board several space-based platforms during the last four solar cycles. However, combining these measurements is still challenging due to the degradation of the sensor elements and the long-term stability of the electronics. Here we describe the preliminary efforts to design an absolute radiometer based on the principle of electrical substitution that is under development at Brazilian's National Institute for Space Research (INPE).

  10. Designing an effective microbial forensics program for law enforcement and national security purposes.

    Science.gov (United States)

    Murch, Randall S

    2014-06-01

    Forensic capabilities that provide lead information, and investigative, intelligence, prosecution and policy decision support can be invaluable for responding to and resolving bioterrorism events. Attributing biological attacks through scientific and other resources and processes is an important goal, for which science can be instrumental. Some even believe that having effective microbial forensics capabilities along with others can even deter adversaries from using biological weapons. For those nations that do not have such or wish to integrate or upgrade capabilities, thoughtful analysis and consideration of certain design principles will increase the likelihood that success will be attained.

  11. A preliminary study on designing ecological corridors in Xishuangbanna National Nature Reserve with 3S techniques

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    This paper is based on the fieldwork in Xishuang-banna Natioanl Nature Reserve in Yunnan Province of China. GPS data of Asian elephants were collected and analyzed with the remote sensing satellite photos of the region to estimate the landform physiognomy of different colors. We also analyzed a series of ecological factors includ-ing altitude, landform, relief, villages and roads which affected the distribution and movement of Asian elephants. The results suggested the possibility of designing and estab-lishing corridors in Xishuangbanna National Nature Reserve to protect the population of wild elephants in the region.

  12. Nation

    DEFF Research Database (Denmark)

    Østergaard, Uffe

    2014-01-01

    Nation er et gammelt begreb, som kommer af det latinske ord for fødsel, natio. Nationalisme bygger på forestillingen om, at mennesker har én og kun én national identitet og har ret til deres egen nationalstat. Ordet og forestillingen er kun godt 200 år gammel, og i 1900-tallet har ideologien bredt...... sig over hele verden. Nationalisme er blevet global....

  13. Hierarchical clustering for graph visualization

    CERN Document Server

    Clémençon, Stéphan; Rossi, Fabrice; Tran, Viet Chi

    2012-01-01

    This paper describes a graph visualization methodology based on hierarchical maximal modularity clustering, with interactive and significant coarsening and refining possibilities. An application of this method to HIV epidemic analysis in Cuba is outlined.

  14. Direct hierarchical assembly of nanoparticles

    Science.gov (United States)

    Xu, Ting; Zhao, Yue; Thorkelsson, Kari

    2014-07-22

    The present invention provides hierarchical assemblies of a block copolymer, a bifunctional linking compound and a nanoparticle. The block copolymers form one micro-domain and the nanoparticles another micro-domain.

  15. A Hierarchical Statistic Methodology for Advanced Memory System Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Sun, X.-J.; He, D.; Cameron, K.W.; Luo, Y.

    1999-04-12

    Advances in technology have resulted in a widening of the gap between computing speed and memory access time. Data access time has become increasingly important for computer system design. Various hierarchical memory architectures have been developed. The performance of these advanced memory systems, however, varies with applications and problem sizes. How to reach an optimal cost/performance design eludes researchers still. In this study, the authors introduce an evaluation methodology for advanced memory systems. This methodology is based on statistical factorial analysis and performance scalability analysis. It is two fold: it first determines the impact of memory systems and application programs toward overall performance; it also identifies the bottleneck in a memory hierarchy and provides cost/performance comparisons via scalability analysis. Different memory systems can be compared in terms of mean performance or scalability over a range of codes and problem sizes. Experimental testing has been performed extensively on the Department of Energy's Accelerated Strategic Computing Initiative (ASCI) machines and benchmarks available at the Los Alamos National Laboratory to validate this newly proposed methodology. Experimental and analytical results show this methodology is simple and effective. It is a practical tool for memory system evaluation and design. Its extension to general architectural evaluation and parallel computer systems are possible and should be further explored.

  16. Hierarchical architecture of active knits

    Science.gov (United States)

    Abel, Julianna; Luntz, Jonathan; Brei, Diann

    2013-12-01

    Nature eloquently utilizes hierarchical structures to form the world around us. Applying the hierarchical architecture paradigm to smart materials can provide a basis for a new genre of actuators which produce complex actuation motions. One promising example of cellular architecture—active knits—provides complex three-dimensional distributed actuation motions with expanded operational performance through a hierarchically organized structure. The hierarchical structure arranges a single fiber of active material, such as shape memory alloys (SMAs), into a cellular network of interlacing adjacent loops according to a knitting grid. This paper defines a four-level hierarchical classification of knit structures: the basic knit loop, knit patterns, grid patterns, and restructured grids. Each level of the hierarchy provides increased architectural complexity, resulting in expanded kinematic actuation motions of active knits. The range of kinematic actuation motions are displayed through experimental examples of different SMA active knits. The results from this paper illustrate and classify the ways in which each level of the hierarchical knit architecture leverages the performance of the base smart material to generate unique actuation motions, providing necessary insight to best exploit this new actuation paradigm.

  17. Quick Web Services Lookup Model Based on Hierarchical Registration

    Institute of Scientific and Technical Information of China (English)

    谢山; 朱国进; 陈家训

    2003-01-01

    Quick Web Services Lookup (Q-WSL) is a new model to registration and lookup of complex services in the Internet. The model is designed to quickly find complex Web services by using hierarchical registration method. The basic concepts of Web services system are introduced and presented, and then the method of hierarchical registration of services is described. In particular, service query document description and service lookup procedure are concentrated, and it addresses how to lookup these services which are registered in the Web services system. Furthermore, an example design and an evaluation of its performance are presented.Specifically, it shows that the using of attributionbased service query document design and contentbased hierarchical registration in Q-WSL allows service requesters to discover needed services more flexibly and rapidly. It is confirmed that Q-WSL is very suitable for Web services system.

  18. Designations in US EPA Region 9 for the 1997 8-hour ozone (O3) national ambient air quality standards

    Data.gov (United States)

    U.S. Environmental Protection Agency — Polygon Esri shapefile of designated areas for 8-hour ozone, for the revoked primary and secondary 1997 National Ambient Air Quality Standards (NAAQS). Nonattainment...

  19. Design and development for updating national 1:50,000 topographic databases in China

    Directory of Open Access Journals (Sweden)

    CHEN Jun

    2010-02-01

    Full Text Available 1.1 Objective Map databases are irreplaceable national treasure of immense importance. Their currency referring to its consistency with respect to the real world plays a critical role in its value and applications. The continuous updating of map databases at 1:50,000 scales is a massive and difficult task for larger countries of the size of more than several million’s kilometer squares. This paper presents the research and technological development to support the national map updating at 1:50,000 scales in China, including the development of updating models and methods, production tools and systems for large-scale and rapid updating, as well as the design and implementation of the continuous updating workflow. 1.2 Methodology The updating of map databases is different than its original creation, and a number of new problems should be solved, such as change detection using latest multi-source data, incremental object revision and relation amendment. The methodology of this paper consists of the following three parts: 1 Examine the four key aspects of map database updating and develop basic updating models/methods, such as currentness-oriented integration of multi-resource data, completeness-based incremental change detection in the context of existing datasets, consistency-aware processing of updated data sets, and user-friendly propagation and services of updates. 2 Design and develop specific software tools and packages to support the large-scale updating production with high resolution imagery and large-scale data generalization, such as map generalization, GIS-supported change interpretation from imagery, DEM interpolation, image matching-based orthophoto generation, data control at different levels. 3 Design a national 1:50,000 databases updating strategy and its production workflow, including a full coverage updating pattern characterized by all element topographic data modeling, change detection in all related areas, and whole process

  20. Design of Installing Check Dam Using RAMMS Model in Seorak National Park of South Korea

    Science.gov (United States)

    Jun, K.; Tak, W.; JUN, B. H.; Lee, H. J.; KIM, S. D.

    2016-12-01

    Design of Installing Check Dam Using RAMMS Model in Seorak National Park of South Korea Kye-Won Jun*, Won-Jun Tak*, Byong-Hee Jun**, Ho-Jin Lee***, Soung-Doug Kim* *Graduate School of Disaster Prevention, Kangwon National University, 346 Joogang-ro, Samcheok-si, Gangwon-do, Korea **School of Fire and Disaster Protection, Kangwon National University, 346 Joogang-ro, Samcheok-si, Gangwon-do, Korea ***School of Civil Engineering, Chungbuk National University, 1 Chungdae-ro, Seowon-gu, Cheongju, Korea Abstract As more than 64% of the land in South Korea is mountainous area, so many regions in South Korea are exposed to the danger of landslide and debris flow. So it is important to understand the behavior of debris flow in mountainous terrains, the various methods and models are being presented and developed based on the mathematical concept. The purpose of this study is to investigate the regions that experienced the debris flow due to typhoon called Ewiniar and to perform numerical modeling to design and layout of the Check dam for reducing the damage by the debris flow. For the performance of numerical modeling, on-site measurement of the research area was conducted including: topographic investigation, research on bridges in the downstream, and precision LiDAR 3D scanning for composed basic data of numerical modeling. The numerical simulation of this study was performed using RAMMS (Rapid Mass Movements Simulation) model for the analysis of the debris flow. This model applied to the conditions of the Check dam which was installed in the upstream, midstream, and downstream. Considering the reduction effect of debris flow, the expansion of debris flow, and the influence on the bridges in the downstream, proper location of the Check dam was designated. The result of present numerical model showed that when the Check dam was installed in the downstream section, 50 m above the bridge, the reduction effect of the debris flow was higher compared to when the Check dam were

  1. Assessing usual dietary intake in complex sample design surveys: the National Dietary Survey

    Directory of Open Access Journals (Sweden)

    Flávia dos Santos Barbosa

    2013-02-01

    Full Text Available The National Cancer Institute (NCI method allows the distributions of usual intake of nutrients and foods to be estimated. This method can be used in complex surveys. However, the user must perform additional calculations, such as balanced repeated replication (BRR, in order to obtain standard errors and confidence intervals for the percentiles and mean from the distribution of usual intake. The objective is to highlight adaptations of the NCI method using data from the National Dietary Survey. The application of the NCI method was exemplified analyzing the total energy (kcal and fruit (g intake, comparing estimations of mean and standard deviation that were based on the complex design of the Brazilian survey with those assuming simple random sample. Although means point estimates were similar, estimates of standard error using the complex design increased by up to 60% compared to simple random sample. Thus, for valid estimates of food and energy intake for the population, all of the sampling characteristics of the surveys should be taken into account because when these characteristics are neglected, statistical analysis may produce underestimated standard errors that would compromise the results and the conclusions of the survey.

  2. Simulated performance of the optical Thomson scattering diagnostic designed for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Ross, J. S., E-mail: ross36@llnl.gov; Datte, P.; Divol, L.; Galbraith, J.; Hatch, B.; Landen, O.; Manuel, A. M.; Molander, W.; Moody, J. D.; Swadling, G. [Lawrence Livermore National Laboratory, Livermore, California 94551 (United States); Froula, D. H.; Katz, J. [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States); Glenzer, S. H. [SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Kilkenny, J. [General Atomics, San Diego, California 92186 (United States); Montgomery, D. S. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Weaver, J. [Plasma Physics Division, Naval Research Laboratory, Washington, DC 20375 (United States)

    2016-11-15

    An optical Thomson scattering diagnostic has been designed for the National Ignition Facility to characterize under-dense plasmas. We report on the design of the system and the expected performance for different target configurations. The diagnostic is designed to spatially and temporally resolve the Thomson scattered light from laser driven targets. The diagnostic will collect scattered light from a 50 × 50 × 200 μm volume. The optical design allows operation with different probe laser wavelengths. A deep-UV probe beam (λ{sub 0} = 210 nm) will be used to Thomson scatter from electron plasma densities of ∼5 × 10{sup 20} cm{sup −3} while a 3ω probe will be used for plasma densities of ∼1 × 10{sup 19} cm{sup −3}. The diagnostic package contains two spectrometers: the first to resolve Thomson scattering from ion acoustic wave fluctuations and the second to resolve scattering from electron plasma wave fluctuations. Expected signal levels relative to background will be presented for typical target configurations (hohlraums and a planar foil).

  3. Fish Springs National Wildlife Refuge National Vegetation Classification (NVC) map

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — National Vegetation Classification (NVC) map for Fish Springs National Wildlife Refuge. NVC provides a standardized hierarchical approach to classifying vegetation...

  4. Implications of sampling design and sample size for national carbon accounting systems.

    Science.gov (United States)

    Köhl, Michael; Lister, Andrew; Scott, Charles T; Baldauf, Thomas; Plugge, Daniel

    2011-11-08

    Countries willing to adopt a REDD regime need to establish a national Measurement, Reporting and Verification (MRV) system that provides information on forest carbon stocks and carbon stock changes. Due to the extensive areas covered by forests the information is generally obtained by sample based surveys. Most operational sampling approaches utilize a combination of earth-observation data and in-situ field assessments as data sources. We compared the cost-efficiency of four different sampling design alternatives (simple random sampling, regression estimators, stratified sampling, 2-phase sampling with regression estimators) that have been proposed in the scope of REDD. Three of the design alternatives provide for a combination of in-situ and earth-observation data. Under different settings of remote sensing coverage, cost per field plot, cost of remote sensing imagery, correlation between attributes quantified in remote sensing and field data, as well as population variability and the percent standard error over total survey cost was calculated. The cost-efficiency of forest carbon stock assessments is driven by the sampling design chosen. Our results indicate that the cost of remote sensing imagery is decisive for the cost-efficiency of a sampling design. The variability of the sample population impairs cost-efficiency, but does not reverse the pattern of cost-efficiency of the individual design alternatives. Our results clearly indicate that it is important to consider cost-efficiency in the development of forest carbon stock assessments and the selection of remote sensing techniques. The development of MRV-systems for REDD need to be based on a sound optimization process that compares different data sources and sampling designs with respect to their cost-efficiency. This helps to reduce the uncertainties related with the quantification of carbon stocks and to increase the financial benefits from adopting a REDD regime.

  5. Los Alamos national Laboratory overview of the SAVY-4000 design: meeting the challenge for worker safety

    Energy Technology Data Exchange (ETDEWEB)

    Stone, Timothy Amos [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2012-06-12

    Incidents involving release of nuclear materials stored in containers of convenience such as food pack cans, slip lid taped cans, paint cans, etc. has resulted in defense board concerns over the lack of prescriptive performance requirements for interim storage of nuclear materials. Los Alamos National Laboratory (LANL) has shared in these incidents and in response proactively moved into developing a performance based storage container design, the SAVY-4000. The SAVY-4000 is the first vented general use nuclear material container demonstrated to meet the requirements of DOE M 441.1-1, Nuclear Material Packaging Manual. The SAVY-4000 is an innovative and creative design demonstrated by the fact that it can be opened and closed in a few seconds without torque wrenches or other tools; has a built-in, fire-rated filter that prevents the build-up of hydrogen gas, yet retains 99.97% of plutonium particulates, and prevents release of material even in a 12 foot drop. Finally, it has been tested to 500C for 2 hours, and will reduce the risk to the public in the event of an earthquake/fire scenario. This will allow major nuclear facilities to credit the container towards source term Material at Risk (MAR) reduction. The container was approved for nuclear material storage in theTA-55 Plutonium Facility on March 15, 2011, and the first order of 79 containers was received at LANL on March 21, 2011. The first four SAVY-4000 containers were packaged with plutonium on August 2, 2011. Key aspects ofthe SAVY-4000 vented storage container design will be discussed which include design qualification and testing, implementation plan development and status, risk ranking methodology for re-packaging, in use implementation with interface to LANMAS, surveillance strategy, the design life extension program as enhanced by surveillance activities and production status with the intent to extend well beyond the current five year design life.

  6. Designing a National Longitudinal Faculty Development Curriculum Focused on Educational Scholarship: Process, Outcomes, and Lessons Learned.

    Science.gov (United States)

    Chandran, Latha; Gusic, Maryellen E; Lane, J Lindsey; Baldwin, Constance D

    2017-01-01

    Clinical educators at U.S. academic health centers are frequently disadvantaged in the academic promotion system, lacking needed faculty development, mentoring, and networking support. In 2006, we implemented the national Educational Scholars Program to offer faculty development in educational scholarship for early career educators in pediatrics. We aimed to provide them with skills, experience, and initial success in educational scholarship and dissemination. The 3-year curriculum is delivered in interactive sessions at the annual pediatric academic meetings and online intersession modules. Curriculum content progresses from educational scholarship and implementing scholarly projects to dissemination and professional networking. Intersession modules address project planning, building an educator portfolio, reviewing the literature, using technology, authorship, and peer review. Concurrently, all scholars must complete a mentored educational project and demonstrate national dissemination of a peer-reviewed product to obtain a Certificate of Excellence in Educational Scholarship. The setting of this study was a national, longitudinal, cohort-based faculty development program built within the Academic Pediatric Association, a 2,000-member professional organization. In 10 years, the Educational Scholars Program has enrolled 172 scholars in 8 cohorts; 94 have graduated so far. We describe how formative evaluation guided curriculum refinement and process improvement. Summative evaluations show that faculty and scholars were satisfied with the program. Participant outcomes from Cohort 1, assessed at Kirkpatrick's four levels of evaluation, demonstrate increases in scholarly productivity, leadership activities, and academic promotions. Curriculum building is a dynamic process of ongoing evaluation and modification. Our program benefited from designing an integrated and focused curriculum, developing educational principles to guide program improvements, creating

  7. Designing Robust Hierarchically Textured Oleophobic Fabrics.

    Science.gov (United States)

    Kleingartner, Justin A; Srinivasan, Siddarth; Truong, Quoc T; Sieber, Michael; Cohen, Robert E; McKinley, Gareth H

    2015-12-08

    Commercially available woven fabrics (e.g., nylon- or PET-based fabrics) possess inherently re-entrant textures in the form of cylindrical yarns and fibers. We analyze the liquid repellency of woven and nanotextured oleophobic fabrics using a nested model with n levels of hierarchy that is constructed from modular units of cylindrical and spherical building blocks. At each level of hierarchy, the density of the topographical features is captured using a dimensionless textural parameter D(n)*. For a plain-woven mesh comprised of chemically treated fiber bundles (n = 2), the tight packing of individual fibers in each bundle (D2* ≈ 1) imposes a geometric constraint on the maximum oleophobicity that can be achieved solely by modifying the surface energy of the coating. For liquid droplets contacting such tightly bundled fabrics with modified surface energies, we show that this model predicts a lower bound on the equilibrium contact angle of θ(E) ≈ 57° below which the Cassie–Baxter to Wenzel wetting transition occurs spontaneously, and this is validated experimentally. We demonstrate how the introduction of an additional higher order micro-/nanotexture onto the fibers (n = 3) is necessary to overcome this limit and create more robustly nonwetting fabrics. Finally, we show a simple experimental realization of the enhanced oleophobicity of fabrics by depositing spherical microbeads of poly(methyl methacrylate)/fluorodecyl polyhedral oligomeric silsesquioxane (fluorodecyl POSS) onto the fibers of a commercial woven nylon fabric.

  8. Hierarchical Management to be Implemented on Ratification Risk of Certification Institution

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Recently, the China National Accreditation Service for Conformity Assessment (CNAS) has promulgated Measures for Hierarchical Management of Ratification Risk of Certification Institution (hereinafter referred to as Measures), which was put into execution.

  9. Hierarchical topic modeling with nested hierarchical Dirichlet process

    Institute of Scientific and Technical Information of China (English)

    Yi-qun DING; Shan-ping LI; Zhen ZHANG; Bin SHEN

    2009-01-01

    This paper deals with the statistical modeling of latent topic hierarchies in text corpora. The height of the topic tree is assumed as fixed, while the number of topics on each level as unknown a priori and to be inferred from data. Taking a nonparametric Bayesian approach to this problem, we propose a new probabilistic generative model based on the nested hierarchical Dirichlet process (nHDP) and present a Markov chain Monte Carlo sampling algorithm for the inference of the topic tree structure as welt as the word distribution of each topic and topic distribution of each document. Our theoretical analysis and experiment results show that this model can produce a more compact hierarchical topic structure and captures more free-grained topic relationships compared to the hierarchical latent Dirichlet allocation model.

  10. Royal Canadian Mounted Police National Operations Center Layout Study and Design Options

    Science.gov (United States)

    2012-03-01

    and related child goals. That is, following each top-level goal, all related first-level goals were listed, and between each first-level goals, all...documentation and feedback from the interviews with NOC personnel. This inventory illustrates the hierarchical relationship between child and...as (S), (C), (R), or (U). It is not necessary to include here abstracts in both official languages unless the text is bilingual .) The Centre for

  11. Design of the National Trends Network for monitoring the chemistry of atmospheric precipitation

    Science.gov (United States)

    Robertson, J.K.; Wilson, J.W.

    1985-01-01

    Long-term monitoring (10 years minimum) of the chemistry of wet deposition will be conducted at National Trends Network (NTN) sites across the United States. Precipitation samples will be collected at sites that represent broad regional characteristics. Design of the NTN considered four basic elements during construction of a model to distribute 50, 75, 100, 125 or 150 sites. The modeling oriented design was supplemented with guidance developed during the course of the site selection process. Ultimately, a network of 151 sites was proposed. The basic elements of the design are: (1) Assurance that all areas of the country are represented in the network on the basis of regional ecological properties (96 sites); (2) Placement of additional sites east of the Rocky Mountains to better define high deposition gradients (27 sites); (3) Placement of sites to assure that potentially sensitive regions are represented (15 sites); (4) Placement of sites to allow for other considerations, such as urban area effects (5 sites), intercomparison with Canada (3 sites), and apparent disparities in regional coverage (5 sites). Site selection stressed areas away from urban centers, large point sources, or ocean influences. Local factors, such as stable land ownership, nearby small emission sources (about 10 km), and close-by roads and fireplaces (about 0.5 km) were also considered. All proposed sites will be visited as part of the second phase of the study.

  12. Numerical analysis on mechanical behaviors of hierarchical cellular structures with negative Poisson’s ratio

    Science.gov (United States)

    Li, Dong; Yin, Jianhua; Dong, Liang; Lakes, Roderic S.

    2017-02-01

    Two-dimensional hierarchical re-entrant honeycomb structures were designed and the mechanical behaviors of the structures were studied using a finite element method. Hierarchical re-entrant structure of order n (n ≥ 1) was constructed by replacing each vertex of a lower order (n - 1) hierarchical re-entrant structure with a smaller re-entrant hexagon with identical strut aspect ratio. The Poisson’s ratio and energy absorption capacity of re-entrant structures of different hierarchical orders were studied under different compression velocities. The results showed that the Poisson’s ratio of the first and second order hierarchical structures can reach -1.36 and -1.33 with appropriate aspect ratio, 13.8% and 12.1% lower than that of the zeroth order hierarchical structure. The energy absorption capacity of the three models increased with an increasing compression velocity; the second order hierarchical structure exhibited the highest rate of increase in energy absorption capacity with an increasing compression velocity. The plateau stresses of the first and second order hierarchical structures were slightly lower than that of the zeroth order hierarchical structure; however the second order hierarchical structure exhibited the highest energy absorption capacity at high compression velocity (60 m s-1).

  13. 78 FR 47191 - Air Quality Designations for the 2010 Sulfur Dioxide (SO2) Primary National Ambient Air Quality...

    Science.gov (United States)

    2013-08-05

    ... AGENCY 40 CFR Part 81 RIN 2060-AR18 Air Quality Designations for the 2010 Sulfur Dioxide (SO ) Primary National Ambient Air Quality Standard AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY: This rule establishes air quality designations for certain areas in the United States for the...

  14. New design concepts for energy-conserving buildings. Results of a national competition among students in schools of architecture

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-01

    The National Student Competition in Energy Conscious Design held among professional schools of architecture in 1976 is documented. Fifty-five schools participated, submitting 115 entries; twelve were chosen as finalists. Details are presented on the twelve winning designs and excerpts from the remaining 103 entries are published. (MCW)

  15. 17 CFR 140.20 - Designation of senior official to oversee Commission use of national security information.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Designation of senior official to oversee Commission use of national security information. 140.20 Section 140.20 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION ORGANIZATION, FUNCTIONS, AND PROCEDURES OF THE COMMISSION Functions § 140.20 Designation...

  16. Evaluation of the Low-Energy Design Process and Energy Performance of the Zion National Park Visitor Center: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Long, N.; Torcellini, P.; Pless, S.; Judkoff, R.

    2005-10-01

    Paper discusses NREL's role in the participation of the design process of the Zion National Park Visitor Center Complex and the results documented from monitoring the energy performance of the building for several years. Paper includes PV system and Trombe wall description and lessons learned in the design, construction, and commissioning of the building.

  17. Adaptive color visualization for dichromats using a customized hierarchical palette

    Science.gov (United States)

    Rodríguez-Pardo, Carlos E.; Sharma, Gaurav

    2011-01-01

    We propose a user-centric methodology for displaying digital color documents, that optimizes color representations in an observer specific and adaptive fashion. We apply our framework to situations involving viewers with common dichromatic color vision deficiencies, who face challenges in perceiving information presented in color images and graphics designed for color normal individuals. For situations involving qualitative data visualization, we present a computationally efficient solution that combines a customized observer-specific hierarchical palette with "display time" selection of the number of colors to generate renderings with colors that are easily discriminated by the intended viewer. The palette design is accomplished via a clustering algorithm, that arranges colors in a hierarchical tree based on their perceived differences for the intended viewer. A desired number of highly discriminable colors are readily obtained from the hierarchical palette via a simple truncation. As an illustration, we demonstrate the application of the methodology to Ishihara style images.

  18. [Methodological Aspects of the Sampling Design for the 2015 National Mental Health Survey].

    Science.gov (United States)

    Rodríguez, Nelcy; Rodríguez, Viviana Alejandra; Ramírez, Eugenia; Cediel, Sandra; Gil, Fabián; Rondón, Martín Alonso

    2016-12-01

    The WHO has encouraged the development, implementation and evaluation of policies related to mental health all over the world. In Colombia, within this framework and promoted by the Ministry of Health and Social Protection, as well as being supported by Colciencias, the fourth National Mental Health Survey (NMHST) was conducted using a observational cross sectional study. According to the context and following the guidelines and sampling design, a summary of the methodology used for this sampling process is presented. The fourth NMHST used the Homes Master Sample for Studies in Health from the National System of Studies and Population Surveys for Health to calculate its sample. This Master Sample was developed and implemented in the year 2013 by the Ministry of Social Protection. This study included non-institutionalised civilian population divided into four age groups: children 7-11 years, adolescent 12-17 years, 18-44 years and 44 years old or older. The sample size calculation was based on the reported prevalences in other studies for the outcomes of mental disorders, depression, suicide, associated morbidity, and alcohol use. A probabilistic, cluster, stratified and multistage selection process was used. Expansions factors to the total population were calculated. A total of 15,351 completed surveys were collected and were distributed according to the age groups: 2727, 7-11 years, 1754, 12-17 years, 5889, 18-44 years, and 4981, ≥45 years. All the surveys were distributed in five regions: Atlantic, Oriental, Bogotá, Central and Pacific. A sufficient number of surveys were collected in this study to obtain a more precise approximation of the mental problems and disorders at the regional and national level. Copyright © 2016 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

  19. Design and initial deployment of the wireless local area networking infrastructure at Sandia National Laboratories.

    Energy Technology Data Exchange (ETDEWEB)

    Long, John P.; Hamill, Michael J.; Mitchell, M. G.; Miller, Marc M.; Witzke, Edward L.; Wiener, Dallas J

    2006-11-01

    A major portion of the Wireless Networking Project at Sandia National Laboratories over the last few years has been to examine IEEE 802.11 wireless networking for possible use at Sandia and if practical, introduce this technology. This project team deployed 802.11a, b, and g Wireless Local Area Networking at Sandia. This report examines the basics of wireless networking and captures key results from project tests and experiments. It also records project members thoughts and designs on wireless LAN architecture and security issues. It documents some of the actions and milestones of this project, including pilot and production deployment of wireless networking equipment, and captures the team's rationale behind some of the decisions made. Finally, the report examines lessons learned, future directions, and conclusions.

  20. Design and implementation of a national public health surveillance system in Jordan.

    Science.gov (United States)

    Sheikhali, Sami Adel; Abdallat, Mohammed; Mabdalla, Sultan; Al Qaseer, Bashir; Khorma, Rania; Malik, Mamunur; Profili, Maria Cristina; Rø, Gunnar; Haskew, John

    2016-04-01

    Understanding and improving the health status of communities depend on effective public health surveillance. Adoption of new technologies, standardised case definitions and clinical guidelines for accurate diagnosis, and access to timely and reliable data, remains a challenge for public health surveillance systems however and existing public health surveillance systems are often fragmented, disease specific, inconsistent and of poor quality. We describe the application of an enterprise architecture approach to the design, planning and implementation of a national public health surveillance system in Jordan. This enabled a well planned and collaboratively supported system to be built and implemented using consistent standards for data collection, management, reporting and use. The system is case-based and integrated and employs mobile information technology to aid collection of real-time, standardised data to inform and improve decision-making at different levels of the health system.

  1. Waste Management Education and Research Consortium (WERC), National Environmental Design. Topical report

    Energy Technology Data Exchange (ETDEWEB)

    Reed, B.E.

    1994-10-01

    The 4th Annual Waste-Management Education and Research Consortium (WERC) for National Environmental Design was held on April 10--14 in Las Cruces, New Mexico. The purpose of the WERC is to train students in the area of site remediation and restoration. Consistent with the Cooperative Agreement`s 3rd Task, the ultimate goal of WERC is to provide training for potential engineers and scientists for the DOE`s remediation and restoration efforts. WERC is sponsored by the Department of Energy and is housed at New Mexico State University. Two student groups from West Virginia University`s Department of Civil and Environmental Engineering traveled to New Mexico. Group 1 was composed of graduate students and Group 2 was composed of undergraduate students. Students who participated in this program were exposed to all aspects of the solution of a real life environmental problem.

  2. Design of the neutron imaging pinhole for use at the national ignition facility

    Energy Technology Data Exchange (ETDEWEB)

    Fatherley, Valerie E [Los Alamos National Laboratory; Day, Robert D [Los Alamos National Laboratory; Garcia, Felix P [Los Alamos National Laboratory; Grim, Gary P [Los Alamos National Laboratory; Oertel, John A [Los Alamos National Laboratory; Wilde, Carl H [Los Alamos National Laboratory; Wilke, Mark D [Los Alamos National Laboratory

    2010-01-01

    The Neutron Imaging (NI) diagnostic is designed to be used at the National Ignition Facility (NIF). This instrument will be used to image both primary (14MeV neutrons) and down scattered (6-8MeV neutrons). The pinhole body sits 225mm from the target, while the scintillator and recording systems are located 28m from the target. The diagnostic uses port 90, 315 and the recording system is located in a specifically built room located outside of switchyard I. The location of the pinhole and the recording system combine to give a magnification of 104. The recording of both the primary and downscattered image is done by recording the image from both the front and back side of the scintillator.

  3. Tick-, mosquito-, and rodent-borne parasite sampling designs for the National Ecological Observatory Network

    Science.gov (United States)

    Springer, Yuri P; Hoekman, David; Johnson, Pieter TJ; Duffy, Paul A; Hufft, Rebecca A.; Barnett, David T.; Allan, Brian F.; Amman, Brian R; Barker, Christopher M; Barrera, Roberto; Beard, Charles B; Beati, Lorenza; Begon, Mike; Blackmore, Mark S; Bradshaw, William E; Brisson, Dustin; Calisher, Charles H.; Childs, James E; Diuk-Wasser, Maria A.; Douglass, Richard J; Eisen, Rebecca J; Foley, Desmond H; Foley, Janet E.; Gaff, Holly D; Gardner, Scott L; Ginsberg, Howard; Glass, Gregory E; Hamer, Sarah A; Hayden, Mary H; Hjelle, Brian; Holzapfel, Christina M; Juliano, Steven A.; Kramer, Laura D.; Kuenzi, Amy J.; LaDeau, Shannon L.; Livdahl, Todd P.; Mills, James N.; Moore, Chester G.; Morand, Serge; Nasci, Roger S.; Ogden, Nicholas H.; Ostfeld, Richard S.; Parmenter, Robert R.; Piesman, Joseph; Reisen, William K.; Savage, Harry M.; Sonenshine, Daniel E.; Swei, Andrea; Yabsley, Michael J.

    2016-01-01

    Parasites and pathogens are increasingly recognized as significant drivers of ecological and evolutionary change in natural ecosystems. Concurrently, transmission of infectious agents among human, livestock, and wildlife populations represents a growing threat to veterinary and human health. In light of these trends and the scarcity of long-term time series data on infection rates among vectors and reservoirs, the National Ecological Observatory Network (NEON) will collect measurements and samples of a suite of tick-, mosquito-, and rodent-borne parasites through a continental-scale surveillance program. Here, we describe the sampling designs for these efforts, highlighting sampling priorities, field and analytical methods, and the data as well as archived samples to be made available to the research community. Insights generated by this sampling will advance current understanding of and ability to predict changes in infection and disease dynamics in novel, interdisciplinary, and collaborative ways.

  4. Deliberate change without hierarchical influence?

    DEFF Research Database (Denmark)

    Nørskov, Sladjana; Kesting, Peter; Ulhøi, John Parm

    2017-01-01

    Purpose This paper aims to present that deliberate change is strongly associated with formal structures and top-down influence. Hierarchical configurations have been used to structure processes, overcome resistance and get things done. But is deliberate change also possible without formal...... reveals that deliberate change is indeed achievable in a non-hierarchical collaborative OSS community context. However, it presupposes the presence and active involvement of informal change agents. The paper identifies and specifies four key drivers for change agents’ influence. Originality....../value The findings contribute to organisational analysis by providing a deeper understanding of the importance of leadership in making deliberate change possible in non-hierarchical settings. It points to the importance of “change-by-conviction”, essentially based on voluntary behaviour. This can open the door...

  5. Static Correctness of Hierarchical Procedures

    DEFF Research Database (Denmark)

    Schwartzbach, Michael Ignatieff

    1990-01-01

    A system of hierarchical, fully recursive types in a truly imperative language allows program fragments written for small types to be reused for all larger types. To exploit this property to enable type-safe hierarchical procedures, it is necessary to impose a static requirement on procedure calls....... We introduce an example language and prove the existence of a sound requirement which preserves static correctness while allowing hierarchical procedures. This requirement is further shown to be optimal, in the sense that it imposes as few restrictions as possible. This establishes the theoretical...... basis for a general type hierarchy with static type checking, which enables first-order polymorphism combined with multiple inheritance and specialization in a language with assignments. We extend the results to include opaque types. An opaque version of a type is different from the original but has...

  6. Design of Mixed Batch Reactor and Column Studies at Oak Ridge National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Weimin [Stanford Univ., CA (United States); Criddle, Craig S. [Stanford Univ., CA (United States)

    2015-11-16

    We (the Stanford research team) were invited as external collaborators to contribute expertise in environmental engineering and field research at the ORNL IFRC, Oak Ridge, TN, for projects carried out at the Argonne National Laboratory and funded by US DOE. Specifically, we assisted in the design of batch and column reactors using ORNL IFRC materials to ensure the experiments were relevant to field conditions. During the funded research period, we characterized ORNL IFRC groundwater and sediments in batch microcosm and column experiments conducted at ANL, and we communicated with ANL team members through email and conference calls and face-to-face meetings at the annual ERSP PI meeting and national meetings. Microcosm test results demonstrated that U(VI) in sediments was reduced to U(IV) when amended with ethanol. The reduced products were not uraninite but unknown U(IV) complexes associated with Fe. Fe(III) in solid phase was only partially reduced. Due to budget reductions at ANL, Stanford contributions ended in 2011.

  7. Conceptual design of initial opacity experiments on the national ignition facility

    Science.gov (United States)

    Heeter, R. F.; Bailey, J. E.; Craxton, R. S.; Devolder, B. G.; Dodd, E. S.; Garcia, E. M.; Huffman, E. J.; Iglesias, C. A.; King, J. A.; Kline, J. L.; Liedahl, D. A.; McKenty, P. W.; Opachich, Y. P.; Rochau, G. A.; Ross, P. W.; Schneider, M. B.; Sherrill, M. E.; Wilson, B. G.; Zhang, R.; Perry, T. S.

    2017-02-01

    Accurate models of X-ray absorption and re-emission in partly stripped ions are necessary to calculate the structure of stars, the performance of hohlraums for inertial confinement fusion and many other systems in high-energy-density plasma physics. Despite theoretical progress, a persistent discrepancy exists with recent experiments at the Sandia Z facility studying iron in conditions characteristic of the solar radiative-convective transition region. The increased iron opacity measured at Z could help resolve a longstanding issue with the standard solar model, but requires a radical departure for opacity theory. To replicate the Z measurements, an opacity experiment has been designed for the National Facility (NIF). The design uses established techniques scaled to NIF. A laser-heated hohlraum will produce X-ray-heated uniform iron plasmas in local thermodynamic equilibrium (LTE) at temperatures eV and electron densities 21~\\text{cm}-3$ . The iron will be probed using continuum X-rays emitted in a ps, diameter source from a 2 mm diameter polystyrene (CH) capsule implosion. In this design, of the NIF beams deliver 500 kJ to the mm diameter hohlraum, and the remaining directly drive the CH capsule with 200 kJ. Calculations indicate this capsule backlighter should outshine the iron sample, delivering a point-projection transmission opacity measurement to a time-integrated X-ray spectrometer viewing down the hohlraum axis. Preliminary experiments to develop the backlighter and hohlraum are underway, informing simulated measurements to guide the final design.

  8. Preliminary Conceptual Design Report for the FACET-II Project at SLAC National Accelerator Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Hogan, Mark [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2016-04-22

    Plasma wakefield acceleration has the potential to dramatically shrink the size and cost of particle accelerators. Research at the SLAC National Accelerator Laboratory has demonstrated that plasmas can provide 1,000 times the acceleration in a given distance compared with current technologies. Developing revolutionary and more efficient acceleration techniques that allow for an affordable high-energy collider is the focus of FACET, a National User Facility at SLAC. The existing FACET National User Facility uses part of SLAC’s two-mile-long linear accelerator to generate high-density beams of electrons and positrons. FACET-II is a new test facility to develop advanced acceleration and coherent radiation techniques with high-energy electron and positron beams. It is the only facility in the world with high energy positron beams. FACET-II provides a major upgrade over current FACET capabilities and the breadth of the potential research program makes it truly unique. It will synergistically pursue accelerator science that is vital to the future of both advanced acceleration techniques for High Energy Physics, ultra-high brightness beams for Basic Energy Science, and novel radiation sources for a wide variety of applications. The design parameters for FACET-II are set by the requirements of the plasma wakefield experimental program. To drive the plasma wakefield requires a high peak current, in excess of 10kA. To reach this peak current, the electron and positron design bunch size is 10μ by 10μ transversely with a bunch length of 10μ. This is more than 200 times better than what has been achieved at the existing FACET. The beam energy is 10 GeV, set by the Linac length available and the repetition rate is up to 30 Hz. The FACET-II project is scheduled to be constructed in three major stages. Components of the project discussed in detail include the following: electron injector, bunch compressors and linac, the positron system, the Sector 20 sailboat and W chicanes

  9. Los Alamos National Laboratory new generation standard nuclear material storage container - the SAVY4000 design

    Energy Technology Data Exchange (ETDEWEB)

    Stone, Timothy Amos [Los Alamos National Laboratory

    2010-01-01

    Incidents involving release of nuclear materials stored in containers of convenience such as food pack cans, slip lid taped cans, paint cans, etc. has resulted in defense board concerns over the lack of prescriptive performance requirements for interim storage of nuclear materials. Los Alamos National Laboratory (LANL) has shared in these incidents and in response proactively moved into developing a performance based standard involving storage of nuclear material (RD003). This RD003 requirements document has sense been updated to reflect requirements as identified with recently issued DOE M 441.1-1 'Nuclear Material Packaging Manual'. The new packaging manual was issued at the encouragement of the Defense Nuclear Facilities Safety Board with a clear directive for protecting the worker from exposure due to loss of containment of stored materials. The Manual specifies a detailed and all inclusive approach to achieve a high level of protection; from package design & performance requirements, design life determinations of limited life components, authorized contents evaluations, and surveillance/maintenance to ensure in use package integrity over time. Materials in scope involve those stored outside an approved engineered-contamination barrier that would result in a worker exposure of in excess of 5 rem Committed Effective Does Equivalent (CEDE). Key aspects of meeting the challenge as developed around the SAVY-3000 vented storage container design will be discussed. Design performance and acceptance criteria against the manual, bounding conditions as established that the user must ensure are met to authorize contents in the package (based upon the activity of heat-source plutonium (90% Pu-238) oxide, which bounds the requirements for weapons-grade plutonium oxide), interface as a safety class system within the facility under the LANL plutonium facility DSA, design life determinations for limited life components, and a sense of design specific surveillance

  10. Design progress for the National Ignition Facility laser alignment and beam diagnostics

    Science.gov (United States)

    Bliss, Erlan S.; Boege, Steven J.; Boyd, Robert D.; Davis, Donald T.; Demaret, Robert D.; Feldman, Mark; Gates, Alan J.; Holdener, Fred R.; Knopp, Carl F.; Kyker, R. D.; Lauman, C. W.; McCarville, Tom J.; Miller, John L.; Miller-Kamm, Victoria J.; Rivera, W. E.; Salmon, J. Thaddeus; Severyn, J. R.; Sheem, Sang K.; Thomas, Stan W.; Thompson, Calvin E.; Wang, David Y.; Yoeman, M. F.; Zacharias, Richard A.; Chocol, Clifford J.; Hollis, J.; Whitaker, Daniel E.; Brucker, J.; Bronisz, L.; Sheridan, T.

    1999-07-01

    Earlier papers have described approaches to NIF alignment and laser diagnostics tasks. Now, detailed design of alignment and diagnostic systems for the National Ignition Facility (NIF) laser is in its last year. Specifications are more detailed, additional analyses have been completed, Pro- E models have been developed, and prototypes of specific items have been built. In this paper we update top level concepts, illustrate specific areas of progress, and show design implementations as represented by prototype hardware. The alignment light source network has been fully defined. It utilizes an optimized number of lasers combined with fiber optic distribution to provide the chain alignment beams, system centering references, final spatial filter pinhole references, target alignment beams, and wavefront reference beams. The input and output sensor are being prototyped. They are located respectively in the front end just before beam injection into the full aperture chain and at the transport spatial filter, where the full energy infrared beam leaves the laser. The modularity of the input sensor is improved, and each output sensor mechanical package now incorporates instrumentation for four beams.

  11. Promoting Robust Design of Diode Lasers for Space: A National Initiative

    Science.gov (United States)

    Tratt, David M.; Amzajerdian, Farzin; Kashem, Nasir B.; Shapiro, Andrew A.; Mense, Allan T.

    2007-01-01

    The Diode-laser Array Working Group (DAWG) is a national-level consumer/provider forum for discussion of engineering and manufacturing issues which influence the reliability and survivability of high-power broad-area laser diode devices in space, with an emphasis on laser diode arrays (LDAs) for optical pumping of solid-state laser media. The goals of the group are to formulate and validate standardized test and qualification protocols, operational control recommendations, and consensus manufacturing and certification standards. The group is using reliability and lifetime data collected by laser diode manufacturers and the user community to develop a set of standardized guidelines for specifying and qualifying laser diodes for long-duration operation in space, the ultimate goal being to promote an informed U.S. Government investment and procurement strategy for assuring the availability and durability of space-qualified LDAs. The group is also working to establish effective implementation of statistical design techniques at the supplier design, development, and manufacturing levels to help reduce product performance variability and improve product reliability for diodes employed in space applications

  12. GEO light imaging national testbed (GLINT) heliostat design and testing status

    Science.gov (United States)

    Thornton, Marcia A.; Oldenettel, Jerry R.; Hult, Dane W.; Koski, Katrina; Depue, Tracy; Cuellar, Edward L.; Balfour, Jim; Roof, Morey; Yarger, Fred W.; Newlin, Greg; Ramzel, Lee; Buchanan, Peter; Mariam, Fesseha G.; Scotese, Lee

    2002-01-01

    The GEO Light Imaging National Testbed (GLINT) will use three laser beams producing simultaneous interference fringes to illuminate satellites in geosynchronous earth orbit (GEO). The reflected returns will be recorded using a large 4,000 m2 'light bucket' receiver. This imaging methodology is termed Fourier Telescopy. A major component of the 'light bucket' will be an array of 40 - 80 heliostats. Each heliostat will have a mirrored surface area of 100 m2 mounted on a rigid truss structure which is supported by an A-frame. The truss structure attaches to the torque tube elevation drive and the A-frame structure rests on an azimuth ring that could provide nearly full coverage of the sky. The heliostat is designed to operate in 15 mph winds with jitter of less than 500 microradians peak-to- peak. One objective of the design was to minimize receiver cost to the maximum extent possible while maintaining GLINT system performance specifications. The mechanical structure weights approximately seven tons and is a simple fabricated steel framework. A prototype heliostat has been assembled at Stallion Range Center, White Sands Missile Range, New Mexico and is being tested under a variety of weather and operational conditions. The preliminary results of that testing will be presented as well as some finite element model analyses that were performed to predict the performance of the structure.

  13. Hydraulic manipulator design, analysis, and control at Oak Ridge National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Kress, R.L.; Jansen, J.F. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Love, L.J. [Oak Ridge Inst. for Science and Education, TN (United States); Basher, A.M.H. [South Carolina State Univ., Orangeburg, SC (United States)

    1996-09-01

    To meet the increased payload capacities demanded by present-day tasks, manipulator designers have turned to hydraulics as a means of actuation. Hydraulics have always been the actuator of choice when designing heavy-life construction and mining equipment such as bulldozers, backhoes, and tunneling devices. In order to successfully design, build, and deploy a new hydraulic manipulator (or subsystem) sophisticated modeling, analysis, and control experiments are usually needed. To support the development and deployment of new hydraulic manipulators Oak Ridge National Laboratory (ORNL) has outfitted a significant experimental laboratory and has developed the software capability for research into hydraulic manipulators, hydraulic actuators, hydraulic systems, modeling of hydraulic systems, and hydraulic controls. The hydraulics laboratory at ORNL has three different manipulators. First is a 6-Degree-of-Freedom (6-DoF), multi-planer, teleoperated, flexible controls test bed used for the development of waste tank clean-up manipulator controls, thermal studies, system characterization, and manipulator tracking. Finally, is a human amplifier test bed used for the development of an entire new class of teleoperated systems. To compliment the hardware in the hydraulics laboratory, ORNL has developed a hydraulics simulation capability including a custom package to model the hydraulic systems and manipulators for performance studies and control development. This paper outlines the history of hydraulic manipulator developments at ORNL, describes the hydraulics laboratory, discusses the use of the equipment within the laboratory, and presents some of the initial results from experiments and modeling associated with these hydraulic manipulators. Included are some of the results from the development of the human amplifier/de-amplifier concepts, the characterization of the thermal sensitivity of hydraulic systems, and end-point tracking accuracy studies. Experimental and analytical

  14. One-megajoule, wetted-foam target-design performance for the National Ignition Facilitya)

    Science.gov (United States)

    Collins, T. J. B.; Marozas, J. A.; Betti, R.; Harding, D. R.; McKenty, P. W.; Radha, P. B.; Skupsky, S.; Goncharov, V. N.; Knauer, J. P.; McCrory, R. L.

    2007-05-01

    Wetted-foam, direct-drive target designs are a path to high-gain experiments on the National Ignition Facility (NIF) [J. Paisner et al., Laser Focus World 30, 75 (1994)]. Wetted-foam designs [S. Skupsky et al., in Inertial Fusion Sciences and Applications 2001, edited by K. Tanaka, D. D. Meyerhofer, and J. Meyer-ter-Vehn (Elsevier, Paris, 2002)] take advantage of the increased laser absorption provided by the higher-atomic-number elements in a target ablator composed of plastic foam saturated with deuterium-tritium (DT). The increased laser coupling allows more fuel to be driven with the same incident laser energy, resulting in increased hydrodynamic stability and target gain. A stability analysis of a 1-MJ design was performed using the two-dimensional hydrodynamic code DRACO [P. B. Radha et al., Phys. Plasmas 12, 032702 (2005)]. Simulations examining the effect of the expected levels of laser nonuniformities (single-beam and multiple-beam) and target nonuniformities (surface and ice roughness) have been performed. A nonuniformity-budget analysis has been constructed and suggests that two-dimensional (2D) smoothing by spectral dispersion (SSD) [S. Skupsky et al., J. Appl. Phys. 66, 3456 (1989)] is needed to reduce single-beam nonuniformities to levels sufficient for ignition to proceed. Two integrated 2D simulations with 0.75-μm initial ice roughness, multiple-beam nonuniformity, surface roughness, and imprint were completed, one with 2D SSD smoothing and one with 1D SSD. The former ignited and produced a gain of 32, while the latter failed to ignite. A third integrated 2D simulation with 1-μm initial ice roughness and an ice power-law spectral index of 1 was also completed and produced a gain of 27.

  15. Partnership effectiveness in primary community care networks: A national empirical analysis of partners' coordination infrastructure designs.

    Science.gov (United States)

    Lin, Blossom Yen-Ju; Lin, Yung-Kai; Lin, Cheng-Chieh

    2010-01-01

    Previous empirical and managerial studies have ignored the effectiveness of integrated health networks. It has been argued that the varying definitions and strategic imperatives of integrated organizations may have complicated the assessment of the outcomes/performance of varying models, particularly when their market structures and contexts differed. This study aimed to empirically verify a theoretical perspective on the coordination infrastructure designs and the effectiveness of the primary community care networks (PCCNs) formed and funded by the Bureau of National Health Insurance since March 2003. The PCCNs present a model to replace the traditional fragmented providers in Taiwan's health care. The study used a cross-sectional mailed survey designed to ascertain partnership coordination infrastructure and integration of governance, clinical care, bonding, finances, and information. The outcome indicators were PCCNs' perceived performance and willingness to remain within the network. Structural equation modeling examined the causal relationships, controlling for organizational and environmental factors. Primary data collection occurred from February through December 2005, via structured questionnaires sent to 172 PCCNs. Using the individual PCCN as the unit of analysis, the results found that a network's efforts regarding coordination infrastructures were positively related to the PCCN's perceived performance and willingness to remain within the network. In addition, PCCNs practicing in rural areas and in areas with higher density of medical resources had better perceived effectiveness and willingness to cooperate in the network.Practical Implication: The lack of both an operational definition and an information about system-wide integration may have obstructed understanding of integrated health networks' organizational dynamics. This study empirically examined individual PCCNs and offers new insights on how to improve networks' organizational design and

  16. The plant phenology monitoring design for the National Ecological Observatory Network

    Science.gov (United States)

    Elmendorf, Sarah C; Jones, Katherine D; Cook, Benjamin I.; Diez, Jeffrey M.; Enquist, Carolyn A.F.; Hufft, Rebecca A.; Jones, Matthew O.; Mazer, Susan J.; Miller-Rushing, Abraham J.; Moore, David J. P.; Schwartz, Mark D.; Weltzin, Jake

    2016-01-01

    Phenology is an integrative science that comprises the study of recurring biological activities or events. In an era of rapidly changing climate, the relationship between the timing of those events and environmental cues such as temperature, snowmelt, water availability or day length are of particular interest. This article provides an overview of the plant phenology sampling which will be conducted by the U.S. National Ecological Observatory Network NEON, the resulting data, and the rationale behind the design. Trained technicians will conduct regular in situ observations of plant phenology at all terrestrial NEON sites for the 30-year life of the observatory. Standardized and coordinated data across the network of sites can be used to quantify the direction and magnitude of the relationships between phenology and environmental forcings, as well as the degree to which these relationships vary among sites, among species, among phenophases, and through time. Vegetation at NEON sites will also be monitored with tower-based cameras, satellite remote sensing and annual high-resolution airborne remote sensing. Ground-based measurements can be used to calibrate and improve satellite-derived phenometrics. NEON’s phenology monitoring design is complementary to existing phenology research efforts and citizen science initiatives throughout the world and will produce interoperable data. By collocating plant phenology observations with a suite of additional meteorological, biophysical and ecological measurements (e.g., climate, carbon flux, plant productivity, population dynamics of consumers) at 47 terrestrial sites, the NEON design will enable continentalscale inference about the status, trends, causes and ecological consequences of phenological change.

  17. The Plant Phenology Monitoring Design for the National Ecological Observatory Network

    Science.gov (United States)

    Elmendorf, Sarah C.; Jones, Katherine D.; Cook, Benjamin I.; Diez, Jeffrey M.; Enquist, Carolyn A. F.; Hufft, Rebecca A.; Jones, Matthew O.; Mazer, Susan J.; Miller-Rushing, Abraham J.; Moore, David J. P.; Schwartz, Mark D.; Weltzin, Jake F.

    2016-01-01

    Phenology is an integrative science that comprises the study of recurring biological activities or events. In an era of rapidly changing climate, the relationship between the timing of those events and environmental cues such as temperature, snowmelt, water availability, or day length are of particular interest. This article provides an overview of the observer-based plant phenology sampling conducted by the U.S. National Ecological Observatory Network (NEON), the resulting data, and the rationale behind the design. Trained technicians will conduct regular in situ observations of plant phenology at all terrestrial NEON sites for the 30-yr life of the observatory. Standardized and coordinated data across the network of sites can be used to quantify the direction and magnitude of the relationships between phenology and environmental forcings, as well as the degree to which these relationships vary among sites, among species, among phenophases, and through time. Vegetation at NEON sites will also be monitored with tower-based cameras, satellite remote sensing, and annual high-resolution airborne remote sensing. Ground-based measurements can be used to calibrate and improve satellite-derived phenometrics. NEON's phenology monitoring design is complementary to existing phenology research efforts and citizen science initiatives throughout the world and will produce interoperable data. By collocating plant phenology observations with a suite of additional meteorological, biophysical, and ecological measurements (e.g., climate, carbon flux, plant productivity, population dynamics of consumers) at 47 terrestrial sites, the NEON design will enable continental-scale inference about the status, trends, causes, and ecological consequences of phenological change.

  18. Sensory Hierarchical Organization and Reading.

    Science.gov (United States)

    Skapof, Jerome

    The purpose of this study was to judge the viability of an operational approach aimed at assessing response styles in reading using the hypothesis of sensory hierarchical organization. A sample of 103 middle-class children from a New York City public school, between the ages of five and seven, took part in a three phase experiment. Phase one…

  19. Memory Stacking in Hierarchical Networks.

    Science.gov (United States)

    Westö, Johan; May, Patrick J C; Tiitinen, Hannu

    2016-02-01

    Robust representations of sounds with a complex spectrotemporal structure are thought to emerge in hierarchically organized auditory cortex, but the computational advantage of this hierarchy remains unknown. Here, we used computational models to study how such hierarchical structures affect temporal binding in neural networks. We equipped individual units in different types of feedforward networks with local memory mechanisms storing recent inputs and observed how this affected the ability of the networks to process stimuli context dependently. Our findings illustrate that these local memories stack up in hierarchical structures and hence allow network units to exhibit selectivity to spectral sequences longer than the time spans of the local memories. We also illustrate that short-term synaptic plasticity is a potential local memory mechanism within the auditory cortex, and we show that it can bring robustness to context dependence against variation in the temporal rate of stimuli, while introducing nonlinearities to response profiles that are not well captured by standard linear spectrotemporal receptive field models. The results therefore indicate that short-term synaptic plasticity might provide hierarchically structured auditory cortex with computational capabilities important for robust representations of spectrotemporal patterns.

  20. A hierarchical architecture for an energy management system

    NARCIS (Netherlands)

    Piotrowski, Krzysztof; Casaca, Augusto; Gerards, Marco E.T.; Jongerden, Marijn; Melo, Francisco; Garrido, Daniel; Geers, Marcel; Peralta, Jacoba

    2016-01-01

    This paper introduces an innovative energy management system architecture for Smart Grids, designed in the European 7th framework program project e-balance. The architecture is hierarchical and fractal-like, which results in better scalability and reuse of algorithms and programming code for energy

  1. Historic Sites and National Register of Historic Places, Historic places Nationally registered or Locally Designated by Ordinance and Historic Site Survey, Published in 2012, 1:1200 (1in=100ft) scale, City of Bloomington Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Historic Sites and National Register of Historic Places dataset current as of 2012. Historic places Nationally registered or Locally Designated by Ordinance and...

  2. Hierarchical honeycomb auxetic metamaterials.

    Science.gov (United States)

    Mousanezhad, Davood; Babaee, Sahab; Ebrahimi, Hamid; Ghosh, Ranajay; Hamouda, Abdelmagid Salem; Bertoldi, Katia; Vaziri, Ashkan

    2015-12-16

    Most conventional materials expand in transverse directions when they are compressed uniaxially resulting in the familiar positive Poisson's ratio. Here we develop a new class of two dimensional (2D) metamaterials with negative Poisson's ratio that contract in transverse directions under uniaxial compressive loads leading to auxeticity. This is achieved through mechanical instabilities (i.e., buckling) introduced by structural hierarchy and retained over a wide range of applied compression. This unusual behavior is demonstrated experimentally and analyzed computationally. The work provides new insights into the role of structural organization and hierarchy in designing 2D auxetic metamaterials, and new opportunities for developing energy absorbing materials, tunable membrane filters, and acoustic dampeners.

  3. Hierarchical model of matching

    Science.gov (United States)

    Pedrycz, Witold; Roventa, Eugene

    1992-01-01

    The issue of matching two fuzzy sets becomes an essential design aspect of many algorithms including fuzzy controllers, pattern classifiers, knowledge-based systems, etc. This paper introduces a new model of matching. Its principal features involve the following: (1) matching carried out with respect to the grades of membership of fuzzy sets as well as some functionals defined on them (like energy, entropy,transom); (2) concepts of hierarchies in the matching model leading to a straightforward distinction between 'local' and 'global' levels of matching; and (3) a distributed character of the model realized as a logic-based neural network.

  4. Whole-Body MR Imaging in the German National Cohort: Rationale, Design, and Technical Background.

    Science.gov (United States)

    Bamberg, Fabian; Kauczor, Hans-Ulrich; Weckbach, Sabine; Schlett, Christopher L; Forsting, Michael; Ladd, Susanne C; Greiser, Karin Halina; Weber, Marc-André; Schulz-Menger, Jeanette; Niendorf, Thoralf; Pischon, Tobias; Caspers, Svenja; Amunts, Katrin; Berger, Klaus; Bülow, Robin; Hosten, Norbert; Hegenscheid, Katrin; Kröncke, Thomas; Linseisen, Jakob; Günther, Matthias; Hirsch, Jochen G; Köhn, Alexander; Hendel, Thomas; Wichmann, Heinz-Erich; Schmidt, Börge; Jöckel, Karl-Heinz; Hoffmann, Wolfgang; Kaaks, Rudolf; Reiser, Maximilian F; Völzke, Henry

    2015-10-01

    To detail the rationale, design, and future perspective of implementing whole-body magnetic resonance (MR) imaging in the German National Cohort, a large multicentric population-based study. All institutional review boards approved the study, and informed consent is obtained before study enrollment. Participants are enrolled from a random sample of the general population at five dedicated imaging sites among 18 recruitment centers. MR imaging facilities are equipped with identical 3.0-T imager technology and use uniform MR protocols. Imager-specific hardware and software settings remained constant over the study period. On-site and centralized measures of image quality enable monitoring of completeness of the acquisitions and quality of each of the MR sequences. Certified radiologists read all MR imaging studies for presence of incidental findings according to predefined algorithms. Over a 4-year period, six participants per day are examined at each center, totaling a final imaging cohort of approximately 30 000 participants. The MR imaging protocol is identical for each site and comprises a set of 12 native series to cover neurologic, cardiovascular, thoracoabdominal, and musculoskeletal imaging phenotypes totaling approximately 1 hour of imaging time. A dedicated analysis platform as part of a central imaging core incorporates a thin client-based integrative and modular data handling platform to enable multicentric off-site image reading for incidental findings. Scientific analysis will be pursued on a per-project hypothesis-driven basis. Population-based whole-body MR imaging as part of the German National Cohort will serve to compile a comprehensive image repository, will provide insight into physiologic variants and subclinical disease burden, and has the potential to enable identification of novel imaging biomarkers of risk. (©) RSNA, 2015 Online supplemental material is available for this article.

  5. Hierarchical organisation of Britain through percolation theory

    CERN Document Server

    Arcaute, Elsa; Hatna, Erez; Murcio, Roberto; Vargas-Ruiz, Camilo; Masucci, Paolo; Wang, Jiaqiu; Batty, Michael

    2015-01-01

    Urban systems present hierarchical structures at many different scales. These are observed as administrative regional delimitations, which are the outcome of geographical, political and historical constraints. Using percolation theory on the street intersections and on the road network of Britain, we obtain hierarchies at different scales that are independent of administrative arrangements. Natural boundaries, such as islands and National Parks, consistently emerge at the largest/regional scales. Cities are devised through recursive percolations on each of the emerging clusters, but the system does not undergo a phase transition at the distance threshold at which cities can be defined. This specific distance is obtained by computing the fractal dimension of the clusters extracted at each distance threshold. We observe that the fractal dimension presents a maximum over all the different distance thresholds. The clusters obtained at this maximum are in very good correspondence to the morphological definition of...

  6. The Design of Data Disaster Recovery of National Fundamental Geographic Information System

    Science.gov (United States)

    Zhai, Y.; Chen, J.; Liu, L.; Liu, J.

    2014-04-01

    With the development of information technology, data security of information system is facing more and more challenges. The geographic information of surveying and mapping is fundamental and strategic resource, which is applied in all areas of national economic, defence and social development. It is especially vital to national and social interests when such classified geographic information is directly concerning Chinese sovereignty. Several urgent problems that needs to be resolved for surveying and mapping are how to do well in mass data storage and backup, establishing and improving the disaster backup system especially after sudden natural calamity accident, and ensuring all sectors rapidly restored on information system will operate correctly. For overcoming various disaster risks, protect the security of data and reduce the impact of the disaster, it's no doubt the effective way is to analysis and research on the features of storage and management and security requirements, as well as to ensure that the design of data disaster recovery system suitable for the surveying and mapping. This article analyses the features of fundamental geographic information data and the requirements of storage management, three site disaster recovery system of DBMS plan based on the popular network, storage and backup, data replication and remote switch of application technologies. In LAN that synchronous replication between database management servers and the local storage of backup management systems, simultaneously, remote asynchronous data replication between local storage backup management systems and remote database management servers. The core of the system is resolving local disaster in the remote site, ensuring data security and business continuity of local site. This article focuses on the following points: background, the necessity of disaster recovery system, the analysis of the data achievements and data disaster recovery plan. Features of this program is to use a

  7. Serious Gaming for Test & Evaluation of Clean-Slate (Ab Initio) National Airspace System (NAS) Designs

    Science.gov (United States)

    Allen, B. Danette; Alexandrov, Natalia

    2016-01-01

    Incremental approaches to air transportation system development inherit current architectural constraints, which, in turn, place hard bounds on system capacity, efficiency of performance, and complexity. To enable airspace operations of the future, a clean-slate (ab initio) airspace design(s) must be considered. This ab initio National Airspace System (NAS) must be capable of accommodating increased traffic density, a broader diversity of aircraft, and on-demand mobility. System and subsystem designs should scale to accommodate the inevitable demand for airspace services that include large numbers of autonomous Unmanned Aerial Vehicles and a paradigm shift in general aviation (e.g., personal air vehicles) in addition to more traditional aerial vehicles such as commercial jetliners and weather balloons. The complex and adaptive nature of ab initio designs for the future NAS requires new approaches to validation, adding a significant physical experimentation component to analytical and simulation tools. In addition to software modeling and simulation, the ability to exercise system solutions in a flight environment will be an essential aspect of validation. The NASA Langley Research Center (LaRC) Autonomy Incubator seeks to develop a flight simulation infrastructure for ab initio modeling and simulation that assumes no specific NAS architecture and models vehicle-to-vehicle behavior to examine interactions and emergent behaviors among hundreds of intelligent aerial agents exhibiting collaborative, cooperative, coordinative, selfish, and malicious behaviors. The air transportation system of the future will be a complex adaptive system (CAS) characterized by complex and sometimes unpredictable (or unpredicted) behaviors that result from temporal and spatial interactions among large numbers of participants. A CAS not only evolves with a changing environment and adapts to it, it is closely coupled to all systems that constitute the environment. Thus, the ecosystem that

  8. DESIGN CHARACTERISTICS OF THE IDAHO NATIONAL LABORATORY HIGH-[TEMPERATURE GAS-COOLED TEST REACTOR

    Energy Technology Data Exchange (ETDEWEB)

    Sterbentz, James; Bayless, Paul; Strydom, Gerhard; Kumar, Akansha; Gougar, Hans

    2016-11-01

    A point design for a graphite-moderated, high-temperature, gas-cooled test reactor (HTG TR) has been developed by Idaho National Laboratory (INL) as part of a United States (U.S.) Department of Energy (DOE) initiative to explore and potentially expand the existing U.S. test reactor capabilities. This paper provides a summary of the design and its main attributes. The 200 MW HTG TR is a thermal-neutron spectrum reactor composed of hexagonal prismatic fuel and graphite reflector blocks. Twelve fuel columns (96 fuel blocks total and 6.34 m active core height) are arranged in two hexagonal rings to form a relatively compact, high-power density, annular core sandwiched between inner, outer, top, and bottom graphite reflectors. The HTG-TR is designed to operate at 7 MPa with a coolant inlet/outlet temperature of 325°C/650°C, and utilizes TRISO particle fuel from the DOE AGR Program with 425 ?m uranium oxycarbide (UCO) kernels and an enrichment of 15.5 wt% 235U. The primary mission of the HTG TR is material irradiation and therefore the core has been specifically designed and optimized to provide the highest possible thermal and fast neutron fluxes. The highest thermal neutron flux (3.90E+14 n/cm2s) occurs in the outer reflector, and the maximum fast flux levels (1.17E+14 n/cm2s) are produced in the central reflector column where most of the graphite has been removed. Due to high core temperatures under accident conditions, all the irradiation test facilities have been located in the inner and outer reflectors where fast flux levels decline. The core features a large number of irradiation positions with large test volumes and long test lengths, ideal for thermal neutron irradiation of large test articles. The total available test volume is more than 1100 liters. Up to four test loop facilities can be accommodated with pressure tube boundaries to isolate test articles and test fluids (e.g., liquid metal, liquid salt, light water) from the helium primary coolant system.

  9. Auction-based resource allocation game under a hierarchical structure

    Science.gov (United States)

    Cui, Yingying; Zou, Suli; Ma, Zhongjing

    2016-01-01

    This paper studies a class of auction-based resource allocation games under a hierarchical structure, such that each supplier is assigned a certain amount of resource from a single provider and allocates it to its buyers with auction mechanisms. To implement the efficient allocations for the underlying hierarchical system, we first design an auction mechanism, for each local system composed of a supplier and its buyers, which inherits the advantages of the progressive second price mechanism. By employing a dynamic algorithm, each local system converges to its own efficient Nash equilibrium, at which the efficient resource allocation is achieved and the bidding prices of all the buyers in this local system are identical with each other. After the local systems reach their own equilibria respectively, the resources assigned to suppliers are readjusted via a dynamic hierarchical algorithm with respect to the bidding prices associated with the implemented equilibria of local systems. By applying the proposed hierarchical process, the formulated hierarchical system can converge to the efficient allocation under certain mild conditions. The developed results in this work are demonstrated with simulations.

  10. 3D Printing of Hierarchical Silk Fibroin Structures.

    Science.gov (United States)

    Sommer, Marianne R; Schaffner, Manuel; Carnelli, Davide; Studart, André R

    2016-12-21

    Like many other natural materials, silk is hierarchically structured from the amino acid level up to the cocoon or spider web macroscopic structures. Despite being used industrially in a number of applications, hierarchically structured silk fibroin objects with a similar degree of architectural control as in natural structures have not been produced yet due to limitations in fabrication processes. In a combined top-down and bottom-up approach, we exploit the freedom in macroscopic design offered by 3D printing and the template-guided assembly of ink building blocks at the meso- and nanolevel to fabricate hierarchical silk porous materials with unprecedented structural control. Pores with tunable sizes in the range 40-350 μm are generated by adding sacrificial organic microparticles as templates to a silk fibroin-based ink. Commercially available wax particles or monodisperse polycaprolactone made by microfluidics can be used as microparticle templates. Since closed pores are generated after template removal, an ultrasonication treatment can optionally be used to achieve open porosity. Such pore templating particles can be further modified with nanoparticles to create a hierarchical template that results in porous structures with a defined nanotopography on the pore walls. The hierarchically porous silk structures obtained with this processing technique can potentially be utilized in various application fields from structural materials to thermal insulation to tissue engineering scaffolds.

  11. Hierarchical surfaces for enhanced self-cleaning applications

    Science.gov (United States)

    Fernández, Ariadna; Francone, Achille; Thamdrup, Lasse H.; Johansson, Alicia; Bilenberg, Brian; Nielsen, Theodor; Guttmann, Markus; Sotomayor Torres, Clivia M.; Kehagias, Nikolaos

    2017-04-01

    In this study we present a flexible and adaptable fabrication method to create complex hierarchical structures over inherently hydrophobic resist materials. We have tested these surfaces for their superhydrophobic behaviour and successfully verified their self-cleaning properties. The followed approach allow us to design and produce superhydrophobic surfaces in a reproducible manner. We have analysed different combination of hierarchical micro-nanostructures for their application to self-cleaning surfaces. A static contact angle value of 170° with a hysteresis of 4° was achieved without the need of any additional chemical treatment on the fabricated hierarchical structures. Dynamic effects were analysed on these surfaces, obtaining a remarkable self-cleaning effect as well as a good robustness over impacting droplets.

  12. YAP-mediated mechanotransduction regulates osteogenic and adipogenic differentiation of BMSCs on hierarchical structure.

    Science.gov (United States)

    Pan, Houhua; Xie, Youtao; Zhang, Zequan; Li, Kai; Hu, Dandan; Zheng, Xuebin; Fan, Qiming; Tang, Tingting

    2017-04-01

    Hierarchical structure mimicking the natural bone microenvironment has been considered as a promising platform to regulate cell functions. We have previously fabricated hierarchical macropore/nanowire structure and evidence has shown that it can better manipulate the cytoskeleton status and osteogenic performance of osteoblasts. However, how cues of hierarchical structure are translated and ultimately linked to BMSC lineage commitment have still remained elusive, which hinders the accurate knowledge and further development of the hierarchical structure. In this study, bone marrow-derived mesenchymal stem cells (BMSCs) fate on hierarchical structure was investigated as well as the detailed mechanisms. It was shown that well-developed cytoskeleton and focal adhesion were observed for BMSCs on hierarchical structure, which was accompanied by enhanced osteogenic and depressed adipogenic potential. Evidence of increased YAP activity and nuclear translocation were exhibited on hierarchical structure and YAP knockdown inhibited osteogenic differentiation and promoted adipogenic differentiation induced by hierarchical structure. Further remove of cytoskeleton tension inhibited YAP function, which confirmed the key role of YAP-mediated mechanotransduction in the BMSC differentiation. These results together provide information of the stem cell fate commitment on hierarchical structure and a promising approach to design advanced biomaterials by focusing on specific mechanotransduction process.

  13. Northern Great Plains Network water quality monitoring design for tributaries to the Missouri National Recreational River

    Science.gov (United States)

    Rowe, Barbara L.; Wilson, Stephen K.; Yager, Lisa; Wilson, Marcia H.

    2013-01-01

    The National Park Service (NPS) organized more than 270 parks with important natural resources into 32 ecoregional networks to conduct Inventory and Monitoring (I&M) activities for assessment of natural resources within park units. The Missouri National Recreational River (NRR) is among the 13 parks in the NPS Northern Great Plain Network (NGPN). Park managers and NGPN staff identified surface water resources as a high priority vital sign to monitor in park units. The objectives for the Missouri NRR water quality sampling design are to (1) assess the current status and long-term trends of select water quality parameters; and (2) document trends in streamflow at high-priority stream systems. Due to the large size of the Missouri River main stem, the NGPN water quality design for the Missouri NRR focuses on wadeable tributaries within the park unit. To correlate with the NGPN water quality protocols, monitoring of the Missouri NRR consists of measurement of field core parameters including dissolved oxygen, pH, specific conductance, and temperature; and streamflow. The purpose of this document is to discuss factors examined for selection of water quality monitoring on segments of the Missouri River tributaries within the Missouri NRR.Awareness of the complex history of the Missouri NRR aids in the current understanding and direction for designing a monitoring plan. Historical and current monitoring data from agencies and entities were examined to assess potential NGPN monitoring sites. In addition, the U.S. Environmental Protection Agency 303(d) list was examined for the impaired segments on tributaries to the Missouri River main stem. Because major tributaries integrate water quality effects from complex combinations of land use and environmental settings within contributing areas, a 20-mile buffer of the Missouri NRR was used to establish environmental settings that may impact the water quality of tributaries that feed the Missouri River main stem. For selection of

  14. 75 FR 23847 - Blocking of Specially Designated National Pursuant to Executive Order 13413

    Science.gov (United States)

    2010-05-04

    ..., Democratic Republic of the; DOB 1973; POB Nord-Kivu, DRC; alt. POB Rwanda; nationality Congo, Democratic..., Utcha Sector, Djugu Territory, Ituri District, Orientale Province, DRC; nationality Congo, Democratic... District, DRC; nationality Congo, Democratic Republic of the (individual) NGUDJOLO, Matthieu Cui...

  15. Are national policies on global health in fact national policies on global health governance? A comparison of policy designs from Norway and Switzerland.

    Science.gov (United States)

    Jones, Catherine M; Clavier, Carole; Potvin, Louise

    2017-03-01

    Since the signing of the Oslo Ministerial Declaration in 2007, the idea that foreign policy formulation should include health considerations has gained traction on the United Nations agenda as evidenced by annual General Assembly resolutions on global health and foreign policy. The adoption of national policies on global health (NPGH) is one way that some member states integrate health and foreign policymaking. This paper explores what these policies intend to do and how countries plan to do it. Using a most similar systems design, we carried out a comparative study of two policy documents formally adopted in 2012. We conducted a directed qualitative content analysis of the Norwegian White Paper on Global health in foreign and development policy and the Swiss Health Foreign Policy using Schneider and Ingram's policy design framework. After replicating analysis methods for each document, we analysed them side by side to explore the commonalities and differences across elements of NPGH design. Analyses indicate that NPGH expect to influence change outside their borders. Targeting the international level, they aim to affect policy venues, multilateral partnerships and international institutions. Instruments for supporting desired changes are primarily those of health diplomacy, proposed as a tool for negotiating interests and objectives for global health between multiple sectors, used internally in Switzerland and externally in Norway. Findings suggest that NPGH designs contribute to constructing the global health governance system by identifying it as a policy target, and policy instruments may elude the health sector actors unless implementation rules explicitly include them. Research should explore how future NPGH designs may construct different kinds of targets as politicised groups of actors on which national governments seek to exercise influence for global health decision-making.

  16. Hierarchical Prisoner's Dilemma in Hierarchical Public-Goods Game

    CERN Document Server

    Fujimoto, Yuma; Kaneko, Kunihiko

    2016-01-01

    The dilemma in cooperation is one of the major concerns in game theory. In a public-goods game, each individual pays a cost for cooperation, or to prevent defection, and receives a reward from the collected cost in a group. Thus, defection is beneficial for each individual, while cooperation is beneficial for the group. Now, groups (say, countries) consisting of individual players also play games. To study such a multi-level game, we introduce a hierarchical public-goods (HPG) game in which two groups compete for finite resources by utilizing costs collected from individuals in each group. Analyzing this HPG game, we found a hierarchical prisoner's dilemma, in which groups choose the defection policy (say, armaments) as a Nash strategy to optimize each group's benefit, while cooperation optimizes the total benefit. On the other hand, for each individual within a group, refusing to pay the cost (say, tax) is a Nash strategy, which turns to be a cooperation policy for the group, thus leading to a hierarchical d...

  17. Conceptual Design Report for a Phase 3 upgrade of the National Synchrotron Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Foyt, W.; Krinsky, S.; Hastings, J. [eds.; Finlay, L.

    1994-03-01

    Considerable investment by both the Department of Energy and the facility`s Participating Research teams has permitted the NSLS to offer a national facility to a wide range of scientific pursuits. The purpose of the NSLS Phase III project is to maximize the scientific output of this premier 2nd generation synchrotron radiation facility through a number of distinct projects. Over the years the NSLS has made significant improvements in the area of beam reliability which has resulted in deliverable, reproducible beam during 98% and 97% of scheduled operations on the VUV and X-ray rings respectively. This project will focus on improving beam intensity and stability by upgrading the optics and detector systems on a number of beamlines as well as upgrading radio frequency (rf) and beam position monitoring systems in the storage rings. In addition, the project includes plans for the design and procurement of a utility isolation system that would guard against voltage transients that disrupt the facility`s electrical system. Also a new insertion device will be installed at beamline X25 and a 2nd floor will be constructed over the X6 -- X16 region which will provide sorely needed laboratory and office space for the user community. This project requests funding of 22.5 million dollars over a three year period: FY 1996 ($6.3M), FY 1997 ($13.4M) and FY 1998 ($2.8M).

  18. High brightness, high current injector design for the ATF upgrade at Brookhaven National Laboratory

    Science.gov (United States)

    Stratakis, Diktys

    2015-04-01

    Brookhaven National Accelerator Test Facility (BNL ATF) is in the process of moving to a new place and upgrading its major capabilities: The electron beam energy and CO2 laser power. Specifically, the maximum electron beam energy will be first projected to 100-150 MeV and then upgraded to 500 MeV while at the same time the laser power will increase 100 fold, thus making the new ATF a powerful tool in advanced accelerator concept research. The bright electron bunch produced by the new state-of-the-art photocathode rf gun will be accelerated and optionally delivered to multiple beamlines. The injector is a key element of this accelerator upgrade. It must deliver a high average current beam with very small transverse and longitudinal emittances, at a sufficiently high energy that space charge effects are under control. We review here the detailed injector design and present first results from beam dynamics simulations. We give emphasis in the production of compressed flat beams which have important applications in novel light-source concepts and could possibly alleviate the need for damping rings in lepton colliders. We present a theoretical model and with the aid of simulation examine the influence of space charge, bunch compression and suggest a operating regime with minimal phase space dilutions.

  19. Hierarchical structure of biological systems

    Science.gov (United States)

    Alcocer-Cuarón, Carlos; Rivera, Ana L; Castaño, Victor M

    2014-01-01

    A general theory of biological systems, based on few fundamental propositions, allows a generalization of both Wierner and Berthalanffy approaches to theoretical biology. Here, a biological system is defined as a set of self-organized, differentiated elements that interact pair-wise through various networks and media, isolated from other sets by boundaries. Their relation to other systems can be described as a closed loop in a steady-state, which leads to a hierarchical structure and functioning of the biological system. Our thermodynamical approach of hierarchical character can be applied to biological systems of varying sizes through some general principles, based on the exchange of energy information and/or mass from and within the systems. PMID:24145961

  20. Automatic Hierarchical Color Image Classification

    Directory of Open Access Journals (Sweden)

    Jing Huang

    2003-02-01

    Full Text Available Organizing images into semantic categories can be extremely useful for content-based image retrieval and image annotation. Grouping images into semantic classes is a difficult problem, however. Image classification attempts to solve this hard problem by using low-level image features. In this paper, we propose a method for hierarchical classification of images via supervised learning. This scheme relies on using a good low-level feature and subsequently performing feature-space reconfiguration using singular value decomposition to reduce noise and dimensionality. We use the training data to obtain a hierarchical classification tree that can be used to categorize new images. Our experimental results suggest that this scheme not only performs better than standard nearest-neighbor techniques, but also has both storage and computational advantages.

  1. Intuitionistic fuzzy hierarchical clustering algorithms

    Institute of Scientific and Technical Information of China (English)

    Xu Zeshui

    2009-01-01

    Intuitionistic fuzzy set (IFS) is a set of 2-tuple arguments, each of which is characterized by a mem-bership degree and a nonmembership degree. The generalized form of IFS is interval-valued intuitionistic fuzzy set (IVIFS), whose components are intervals rather than exact numbers. IFSs and IVIFSs have been found to be very useful to describe vagueness and uncertainty. However, it seems that little attention has been focused on the clus-tering analysis of IFSs and IVIFSs. An intuitionistic fuzzy hierarchical algorithm is introduced for clustering IFSs, which is based on the traditional hierarchical clustering procedure, the intuitionistic fuzzy aggregation operator, and the basic distance measures between IFSs: the Hamming distance, normalized Hamming, weighted Hamming, the Euclidean distance, the normalized Euclidean distance, and the weighted Euclidean distance. Subsequently, the algorithm is extended for clustering IVIFSs. Finally the algorithm and its extended form are applied to the classifications of building materials and enterprises respectively.

  2. Hierarchical Formation of Galactic Clusters

    CERN Document Server

    Elmegreen, B G

    2006-01-01

    Young stellar groupings and clusters have hierarchical patterns ranging from flocculent spiral arms and star complexes on the largest scale to OB associations, OB subgroups, small loose groups, clusters and cluster subclumps on the smallest scales. There is no obvious transition in morphology at the cluster boundary, suggesting that clusters are only the inner parts of the hierarchy where stars have had enough time to mix. The power-law cluster mass function follows from this hierarchical structure: n(M_cl) M_cl^-b for b~2. This value of b is independently required by the observation that the summed IMFs from many clusters in a galaxy equals approximately the IMF of each cluster.

  3. Hierarchical matrices algorithms and analysis

    CERN Document Server

    Hackbusch, Wolfgang

    2015-01-01

    This self-contained monograph presents matrix algorithms and their analysis. The new technique enables not only the solution of linear systems but also the approximation of matrix functions, e.g., the matrix exponential. Other applications include the solution of matrix equations, e.g., the Lyapunov or Riccati equation. The required mathematical background can be found in the appendix. The numerical treatment of fully populated large-scale matrices is usually rather costly. However, the technique of hierarchical matrices makes it possible to store matrices and to perform matrix operations approximately with almost linear cost and a controllable degree of approximation error. For important classes of matrices, the computational cost increases only logarithmically with the approximation error. The operations provided include the matrix inversion and LU decomposition. Since large-scale linear algebra problems are standard in scientific computing, the subject of hierarchical matrices is of interest to scientists ...

  4. Hierarchical Cont-Bouchaud model

    CERN Document Server

    Paluch, Robert; Holyst, Janusz A

    2015-01-01

    We extend the well-known Cont-Bouchaud model to include a hierarchical topology of agent's interactions. The influence of hierarchy on system dynamics is investigated by two models. The first one is based on a multi-level, nested Erdos-Renyi random graph and individual decisions by agents according to Potts dynamics. This approach does not lead to a broad return distribution outside a parameter regime close to the original Cont-Bouchaud model. In the second model we introduce a limited hierarchical Erdos-Renyi graph, where merging of clusters at a level h+1 involves only clusters that have merged at the previous level h and we use the original Cont-Bouchaud agent dynamics on resulting clusters. The second model leads to a heavy-tail distribution of cluster sizes and relative price changes in a wide range of connection densities, not only close to the percolation threshold.

  5. DVB-S2 Spectrum Efficiency Improvement with Hierarchical Modulation

    OpenAIRE

    Meric, Hugo; Piquer, Jose Miguel

    2013-01-01

    We study the design of a DVB-S2 system in order to maximise spectrum efficiency. This task is usually challenging due to channel variability. Modern satellite communications systems such as DVB-SH and DVB-S2 rely mainly on a time sharing strategy to optimise the spectrum efficiency. Recently, we showed that combining time sharing with hierarchical modulation can provide significant gains (in terms of spectrum efficiency) compared to the best time sharing strategy. However, our previous design...

  6. Hierarchical Clustering and Active Galaxies

    CERN Document Server

    Hatziminaoglou, E; Manrique, A

    2000-01-01

    The growth of Super Massive Black Holes and the parallel development of activity in galactic nuclei are implemented in an analytic code of hierarchical clustering. The evolution of the luminosity function of quasars and AGN will be computed with special attention paid to the connection between quasars and Seyfert galaxies. One of the major interests of the model is the parallel study of quasar formation and evolution and the History of Star Formation.

  7. Effects of cycle length and plot density on estimators for a national-scale forest monitoring sample design

    Science.gov (United States)

    Francis A. Roesch; Todd A. Schroeder; James T. Vogt

    2017-01-01

    The resilience of a National Forest Inventory and Monitoring sample design can sometimes depend upon the degree to which it can adapt to fluctuations in funding. If a budget reduction necessitates the observation of fewer plots per year, some practitioners weigh the problem as a tradeoff between reducing the total number of plots and measuring the original number of...

  8. 75 FR 24957 - Decision to Evaluate a Petition to Designate a Class of Employees From the Los Alamos National...

    Science.gov (United States)

    2010-05-06

    ... warranted by the evaluation, is as follows: Facility: Los Alamos National Laboratory. Location: Los Alamos... HUMAN SERVICES Decision to Evaluate a Petition to Designate a Class of Employees From the Los Alamos...: Notice. SUMMARY: HHS gives notice as required by 42 CFR 83.12(e) of a decision to evaluate a petition to...

  9. 76 FR 70456 - Decision To Evaluate a Petition To Designate a Class of Employees From Brookhaven National...

    Science.gov (United States)

    2011-11-14

    ... evaluation, is as follows: Facility: Brookhaven National Laboratory. Location: Upton, New York. Job Titles... HUMAN SERVICES Decision To Evaluate a Petition To Designate a Class of Employees From Brookhaven...: Notice. SUMMARY: HHS gives notice as required by 42 CFR 83.12(e) of a decision to evaluate a petition to...

  10. Hierarchical model-based predictive control of a power plant portfolio

    DEFF Research Database (Denmark)

    Edlund, Kristian; Bendtsen, Jan Dimon; Jørgensen, John Bagterp

    2011-01-01

    control” – becomes increasingly important as the ratio of renewable energy in a power system grows. As a consequence, tomorrow's “smart grids” require highly flexible and scalable control systems compared to conventional power systems. This paper proposes a hierarchical model-based predictive control...... design for power system portfolio control, which aims specifically at meeting these demands.The design involves a two-layer hierarchical structure with clearly defined interfaces that facilitate an object-oriented implementation approach. The same hierarchical structure is reflected in the underlying...

  11. Sandia National Laboratories Facilities Management and Operations Center Design Standards Manual

    Energy Technology Data Exchange (ETDEWEB)

    Fattor, Steven [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2014-06-01

    The manual contains general requirements that apply to nonnuclear and nonexplosive facilities. For design and construction requirements for modifications to nuclear or explosive facilities, see the project-specific design requirements noted in the Design Criteria.

  12. Conceptual design of initial opacity experiments on the national ignition facility

    Energy Technology Data Exchange (ETDEWEB)

    Heeter, R.  F.; Bailey, J.  E.; Craxton, R.  S.; DeVolder, B.  G.; Dodd, E.  S.; Garcia, E.  M.; Huffman, E.  J.; Iglesias, C.  A.; King, J.  A.; Kline, J.  L.; Liedahl, D.  A.; McKenty, P.  W.; Opachich, Y.  P.; Rochau, G.  A.; Ross, P.  W.; Schneider, M.  B.; Sherrill, M.  E.; Wilson, B.  G.; Zhang, R.; Perry, T.  S.

    2017-01-09

    Accurate models of X-ray absorption and re-emission in partly stripped ions are necessary to calculate the structure of stars, the performance of hohlraums for inertial confinement fusion and many other systems in high-energy-density plasma physics. Despite theoretical progress, a persistent discrepancy exists with recent experiments at the Sandia Z facility studying iron in conditions characteristic of the solar radiative–convective transition region. The increased iron opacity measured at Z could help resolve a longstanding issue with the standard solar model, but requires a radical departure for opacity theory. To replicate the Z measurements, an opacity experiment has been designed for the National Facility (NIF). The design uses established techniques scaled to NIF. A laser-heated hohlraum will produce X-ray-heated uniform iron plasmas in local thermodynamic equilibrium (LTE) at temperatures${\\geqslant}150$ eV and electron densities${\\geqslant}7\\times 10^{21}~\\text{cm}^{-3}$. The iron will be probed using continuum X-rays emitted in a${\\sim}200$ ps,${\\sim}200~\\unicode[STIX]{x03BC}\\text{m}$diameter source from a 2 mm diameter polystyrene (CH) capsule implosion. In this design

  13. Whole-Body MR Imaging in the German National Cohort: Rationale, Design, and Technical Background

    National Research Council Canada - National Science Library

    Bamberg, Fabian; Kauczor, Hans-Ulrich; Weckbach, Sabine; Schlett, Christopher L; Forsting, Michael; Ladd, Susanne C; Greiser, Karin Halina; Weber, Marc-André; Schulz-Menger, Jeanette; Niendorf, Thoralf; Pischon, Tobias; Caspers, Svenja; Amunts, Katrin; Berger, Klaus; Bülow, Robin; Hosten, Norbert; Hegenscheid, Katrin; Kröncke, Thomas; Linseisen, Jakob; Günther, Matthias; Hirsch, Jochen G; Köhn, Alexander; Hendel, Thomas; Wichmann, Heinz-Erich; Schmidt, Börge; Jöckel, Karl-Heinz; Hoffmann, Wolfgang; Kaaks, Rudolf; Reiser, Maximilian F; Völzke, Henry

    2015-01-01

    ...) imaging in the German National Cohort, a large multicentric population-based study. All institutional review boards approved the study, and informed consent is obtained before study enrollment...

  14. National Ignition Facility sub-system design requirements ancillary systems SSDR 1.5.6

    Energy Technology Data Exchange (ETDEWEB)

    Spann, J.; Reed, R.; VanArsdall, P.; Bliss, E.

    1996-09-01

    This System Design Requirement document establishes the performance, design, development, and test requirements for the Ancillary Systems, which is part of the NIF Integrated Computer Control System (ICCS).

  15. Design demonstrations for the remaining 19 Category B tank systems at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    This document presents design demonstrations conducted of liquid low-level waste (LLLW) storage tank systems located at the Oak Ridge National Laboratory (ORNL). Demonstration of the design of these tank systems has been stipulated by the Federal Facility Agreement (FFA) between the US Environmental Protection Agency (EPA)--Region IV; the Tennessee Department of Environment and Conservation (TDEC); and the DOE. The FFA establishes four categories of tank systems: Category A--New or Replacement Tank Systems with Secondary Containment; Category B--Existing Tank Systems with Secondary Containment; Category C--Existing Tank Systems Without Secondary Containment; and Category D--Existing Tank Systems Without Secondary Containment That are Removed from Service. This document provides a design demonstration of the secondary containment and ancillary equipment of 19 tank systems listed in the FFA as Category B. Three tank systems originally designated as Category B have been redesignated as Category C and one tank system originally designated as Category B has been redesignated as Category D. The design demonstration for each tank is presented in Section 2. The design demonstrations were developed using information obtained from the design drawings (as-built when available), construction specifications, and interviews with facility operators. The assessments assume that each tank system was constructed in accordance with the design drawings and construction specifications for that system unless specified otherwise. Each design demonstration addresses system conformance to the requirements of the FFA.

  16. Hierarchical Decentralized Control Strategy for Demand-Side Primary Frequency Response

    Energy Technology Data Exchange (ETDEWEB)

    Lian, Jianming; Hansen, Jacob; Marinovici, Laurentiu D.; Kalsi, Karanjit

    2016-07-21

    The Grid Friendly$^\\textrm{TM}$ Appliance~(GFA) controller, developed at Pacific Northwest National Laboratory, was designed for the purpose of autonomously switching off appliances by detecting under-frequency events. In this paper, a new frequency responsive load~(FRL) controller is first proposed by extending the functionality of the original GFA controller. The proposed FRL controller can autonomously switch on (or off) end-use loads by detecting over-frequency (or under-frequency) events through local frequency measurement. Then, a hierarchical decentralized control framework is developed for engaging the end-use loads to provide primary frequency response with the proposed FRL controller. The developed framework has several important features that are desirable in terms of providing primary frequency control. It not only exclusively maintains the autonomous operation of the end-use loads, but also effectively overcomes the stability issue associated with high penetration of FRLs. The simulation results illustrate the effectiveness of the developed hierarchical control framework for providing primary frequency response with the proposed FRL controller.

  17. Multi-objective hierarchical genetic algorithms for multilevel redundancy allocation optimization

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Ranjan [Department of Aeronautics and Astronautics, Kyoto University, Yoshida-honmachi, Sakyo-ku, Kyoto 606-8501 (Japan)], E-mail: ranjan.k@ks3.ecs.kyoto-u.ac.jp; Izui, Kazuhiro [Department of Aeronautics and Astronautics, Kyoto University, Yoshida-honmachi, Sakyo-ku, Kyoto 606-8501 (Japan)], E-mail: izui@prec.kyoto-u.ac.jp; Yoshimura, Masataka [Department of Aeronautics and Astronautics, Kyoto University, Yoshida-honmachi, Sakyo-ku, Kyoto 606-8501 (Japan)], E-mail: yoshimura@prec.kyoto-u.ac.jp; Nishiwaki, Shinji [Department of Aeronautics and Astronautics, Kyoto University, Yoshida-honmachi, Sakyo-ku, Kyoto 606-8501 (Japan)], E-mail: shinji@prec.kyoto-u.ac.jp

    2009-04-15

    Multilevel redundancy allocation optimization problems (MRAOPs) occur frequently when attempting to maximize the system reliability of a hierarchical system, and almost all complex engineering systems are hierarchical. Despite their practical significance, limited research has been done concerning the solving of simple MRAOPs. These problems are not only NP hard but also involve hierarchical design variables. Genetic algorithms (GAs) have been applied in solving MRAOPs, since they are computationally efficient in solving such problems, unlike exact methods, but their applications has been confined to single-objective formulation of MRAOPs. This paper proposes a multi-objective formulation of MRAOPs and a methodology for solving such problems. In this methodology, a hierarchical GA framework for multi-objective optimization is proposed by introducing hierarchical genotype encoding for design variables. In addition, we implement the proposed approach by integrating the hierarchical genotype encoding scheme with two popular multi-objective genetic algorithms (MOGAs)-the strength Pareto evolutionary genetic algorithm (SPEA2) and the non-dominated sorting genetic algorithm (NSGA-II). In the provided numerical examples, the proposed multi-objective hierarchical approach is applied to solve two hierarchical MRAOPs, a 4- and a 3-level problems. The proposed method is compared with a single-objective optimization method that uses a hierarchical genetic algorithm (HGA), also applied to solve the 3- and 4-level problems. The results show that a multi-objective hierarchical GA (MOHGA) that includes elitism and mechanism for diversity preserving performed better than a single-objective GA that only uses elitism, when solving large-scale MRAOPs. Additionally, the experimental results show that the proposed method with NSGA-II outperformed the proposed method with SPEA2 in finding useful Pareto optimal solution sets.

  18. The Design and Product of National 1:1000000 Cartographic Data of Topographic Map

    Science.gov (United States)

    Wang, Guizhi

    2016-06-01

    National administration of surveying, mapping and geoinformation started to launch the project of national fundamental geographic information database dynamic update in 2012. Among them, the 1:50000 database was updated once a year, furthermore the 1:250000 database was downsized and linkage-updated on the basis. In 2014, using the latest achievements of 1:250000 database, comprehensively update the 1:1000000 digital line graph database. At the same time, generate cartographic data of topographic map and digital elevation model data. This article mainly introduce national 1:1000000 cartographic data of topographic map, include feature content, database structure, Database-driven Mapping technology, workflow and so on.

  19. Scenario design and basic analysis of the National Data Centre Preparedness Exercise 2013

    Science.gov (United States)

    Ross, Ole; Ceranna, Lars; Hartmann, Gernot; Gestermann, Nicolai; Bönneman, Christian

    2014-05-01

    The Comprehensive Nuclear-Test-Ban Treaty (CTBT) prohibits all kinds of nuclear explosions. For the detection of treaty violations the International Monitoring System (IMS) operates stations observing seismic, hydroacoustic, and infrasound signals as well as radioisotopes in the atmosphere. While the IMS data is collected, processed and technically analyzed in the International Data Center (IDC) of the CTBT-Organization, National Data Centers (NDC) provide interpretation and advice to their government concerning suspicious detections occurring in IMS data. NDC Preparedness Exercises (NPE) are regularly performed dealing with fictitious treaty violations to practice the combined analysis of CTBT verification technologies and for the mutual exchange of information between NDC and also with the IDC. The NPE2010 and NPE2012 trigger scenarios were based on selected seismic events from the Reviewed Event Bulletin (REB) serving as starting point for fictitious Radionuclide dispersion. The main task was the identification of the original REB event and the discrimination between earthquakes and explosions as source. The scenario design of NPE2013 differs from those of previous NPEs. The waveform event selection is not constrained to events in the REB. The exercise trigger is a combination of a tempo-spatial indication pointing to a certain waveform event and simulated radionuclide concentrations generated by forward Atmospheric Transport Modelling based on a fictitious release. For the waveform event the date (4 Sept. 2013) is given and the region is communicated in a map showing the fictitious state of "Frisia" at the Coast of the North Sea in Central Europe. The synthetic radionuclide detections start in Vienna (8 Sept, I-131) and Schauinsland (11 Sept, Xe-133) with rather low activity concentrations and are most prominent in Stockholm and Spitsbergen mid of September 2013. Smaller concentrations in Asia follow later on. The potential connection between the waveform and

  20. 77 FR 2609 - Unblocking of Specially Designated Nationals and Blocked Persons Pursuant to the Foreign...

    Science.gov (United States)

    2012-01-18

    ...., Guadalajara, Jalisco, Mexico; DOB 05 Aug 1959; POB Guadalajara, Mexico; citizen Mexico; nationality Mexico; C... EXPRESS, S.A. DE C.V.; a.k.a. GRUPO LOMEDIC), Av. del Parque 489, Col. San Andres, Guadalajara, Jalisco...

  1. 75 FR 26846 - Unblocking of Three Specially Designated Nationals Pursuant to Executive Order 13224

    Science.gov (United States)

    2010-05-12

    ...''; a.k.a. ``ABU SAAD''; a.k.a. ``FREEDOM FIGHTER''); DOB 17 Feb 1971; POB Madiun, East Java, Indonesia..., East Java province, Indonesian; nationality Indonesia (individual) . SAMUDRA, Imam (a.k.a....

  2. Design and implementation of speed humps: supplement to national guidelines for traffic calming

    CSIR Research Space (South Africa)

    Emslie, I

    1997-03-01

    Full Text Available This report presents guidelines to assist local authorities and traffic engineers with a uniform approach to the implementation of speed humps. It is recommended that these guidelines be read in conjunction with The National Guidelines for Traffic...

  3. National Ignition Facility sub-system design requirements automatic alignment system SSDR 1.5.5

    Energy Technology Data Exchange (ETDEWEB)

    VanArsdall, P.; Bliss, E.

    1996-09-01

    This System Design Requirement document establishes the performance, design, development, and test requirements for the Automatic Alignment System, which is part of the NIF Integrated Computer Control System (ICCS).

  4. National Ignition Facility sub-system design requirements integrated safety systems SSDR 1.5.4

    Energy Technology Data Exchange (ETDEWEB)

    Reed, R.; VanArsdall, P.; Bliss, E.

    1996-09-01

    This System Design Requirement document establishes the performance, design, development, and test requirements for the Integrated Safety System, which is part of the NIF Integrated Computer Control System (ICCS).

  5. Growth Mechanism of Pumpkin-Shaped Vaterite Hierarchical Structures

    Science.gov (United States)

    Ma, Guobin; Xu, Yifei; Wang, Mu

    2015-03-01

    CaCO3-based biominerals possess sophisticated hierarchical structures and promising mechanical properties. Recent researches imply that vaterite may play an important role in formation of CaCO3-based biominerals. However, as a less common polymorph of CaCO3, the growth mechanism of vaterite remains not very clear. Here we report the growth of a pumpkin-shaped vaterite hierarchical structure with a six-fold symmetrical axis and lamellar microstructure. We demonstrate that the growth is controlled by supersaturation and the intrinsic crystallographic anisotropy of vaterite. For the scenario of high supersaturation, the nucleation rate is higher than the lateral extension rate, favoring the ``double-leaf'' spherulitic growth. Meanwhile, nucleation occurs preferentially in as determined by the crystalline structure of vaterite, modulating the grown products with a hexagonal symmetry. The results are beneficial for an in-depth understanding of the biomineralization of CaCO3. The growth mechanism may also be applicable to interpret the formation of similar hierarchical structures of other materials. The authors gratefully acknowledge the financial support from National Science Foundation of China (Grant Nos. 51172104 and 50972057) and National Key Basic Research Program of China (Grant No. 2010CB630705).

  6. Hierarchical Structures in Hypertext Learning Environments

    NARCIS (Netherlands)

    Bezdan, Eniko; Kester, Liesbeth; Kirschner, Paul A.

    2011-01-01

    Bezdan, E., Kester, L., & Kirschner, P. A. (2011, 9 September). Hierarchical Structures in Hypertext Learning Environments. Presentation for the visit of KU Leuven, Open University, Heerlen, The Netherlands.

  7. Ferritic Alloys with Extreme Creep Resistance via Coherent Hierarchical Precipitates

    Science.gov (United States)

    Song, Gian; Sun, Zhiqian; Li, Lin; Xu, Xiandong; Rawlings, Michael; Liebscher, Christian H.; Clausen, Bjørn; Poplawsky, Jonathan; Leonard, Donovan N.; Huang, Shenyan; Teng, Zhenke; Liu, Chain T.; Asta, Mark D.; Gao, Yanfei; Dunand, David C.; Ghosh, Gautam; Chen, Mingwei; Fine, Morris E.; Liaw, Peter K.

    2015-01-01

    There have been numerous efforts to develop creep-resistant materials strengthened by incoherent particles at high temperatures and stresses in response to future energy needs for steam turbines in thermal-power plants. However, the microstructural instability of the incoherent-particle-strengthened ferritic steels limits their application to temperatures below 900 K. Here, we report a novel ferritic alloy with the excellent creep resistance enhanced by coherent hierarchical precipitates, using the integrated experimental (transmission-electron microscopy/scanning-transmission-electron microscopy, in-situ neutron diffraction, and atom-probe tomography) and theoretical (crystal-plasticity finite-element modeling) approaches. This alloy is strengthened by nano-scaled L21-Ni2TiAl (Heusler phase)-based precipitates, which themselves contain coherent nano-scaled B2 zones. These coherent hierarchical precipitates are uniformly distributed within the Fe matrix. Our hierarchical structure material exhibits the superior creep resistance at 973 K in terms of the minimal creep rate, which is four orders of magnitude lower than that of conventional ferritic steels. These results provide a new alloy-design strategy using the novel concept of hierarchical precipitates and the fundamental science for developing creep-resistant ferritic alloys. The present research will broaden the applications of ferritic alloys to higher temperatures. PMID:26548303

  8. Dynamic Organization of Hierarchical Memories.

    Science.gov (United States)

    Kurikawa, Tomoki; Kaneko, Kunihiko

    2016-01-01

    In the brain, external objects are categorized in a hierarchical way. Although it is widely accepted that objects are represented as static attractors in neural state space, this view does not take account interaction between intrinsic neural dynamics and external input, which is essential to understand how neural system responds to inputs. Indeed, structured spontaneous neural activity without external inputs is known to exist, and its relationship with evoked activities is discussed. Then, how categorical representation is embedded into the spontaneous and evoked activities has to be uncovered. To address this question, we studied bifurcation process with increasing input after hierarchically clustered associative memories are learned. We found a "dynamic categorization"; neural activity without input wanders globally over the state space including all memories. Then with the increase of input strength, diffuse representation of higher category exhibits transitions to focused ones specific to each object. The hierarchy of memories is embedded in the transition probability from one memory to another during the spontaneous dynamics. With increased input strength, neural activity wanders over a narrower state space including a smaller set of memories, showing more specific category or memory corresponding to the applied input. Moreover, such coarse-to-fine transitions are also observed temporally during transient process under constant input, which agrees with experimental findings in the temporal cortex. These results suggest the hierarchy emerging through interaction with an external input underlies hierarchy during transient process, as well as in the spontaneous activity.

  9. Nonlinear robust hierarchical control for nonlinear uncertain systems

    Directory of Open Access Journals (Sweden)

    Leonessa Alexander

    1999-01-01

    Full Text Available A nonlinear robust control-system design framework predicated on a hierarchical switching controller architecture parameterized over a set of moving nominal system equilibria is developed. Specifically, using equilibria-dependent Lyapunov functions, a hierarchical nonlinear robust control strategy is developed that robustly stabilizes a given nonlinear system over a prescribed range of system uncertainty by robustly stabilizing a collection of nonlinear controlled uncertain subsystems. The robust switching nonlinear controller architecture is designed based on a generalized (lower semicontinuous Lyapunov function obtained by minimizing a potential function over a given switching set induced by the parameterized nominal system equilibria. The proposed framework robustly stabilizes a compact positively invariant set of a given nonlinear uncertain dynamical system with structured parametric uncertainty. Finally, the efficacy of the proposed approach is demonstrated on a jet engine propulsion control problem with uncertain pressure-flow map data.

  10. How national context, project design, and local community characteristics influence success in community-based conservation projects.

    Science.gov (United States)

    Brooks, Jeremy S; Waylen, Kerry A; Borgerhoff Mulder, Monique

    2012-12-26

    Community-based conservation (CBC) promotes the idea that conservation success requires engaging with, and providing benefits for, local communities. However, CBC projects are neither consistently successful nor free of controversy. Innovative recent studies evaluating the factors associated with success and failure typically examine only a single resource domain, have limited geographic scope, consider only one outcome, or ignore the nested nature of socioecological systems. To remedy these issues, we use a global comparative database of CBC projects identified by systematic review to evaluate success in four outcome domains (attitudes, behaviors, ecological, economic) and explore synergies and trade-offs among these outcomes. We test hypotheses about how features of the national context, project design, and local community characteristics affect these measures of success. Using bivariate analyses and multivariate proportional odds logistic regressions within a multilevel analysis and model-fitting framework, we show that project design, particularly capacity-building in local communities, is associated with success across all outcomes. In addition, some characteristics of the local community in which projects are conducted, such as tenure regimes and supportive cultural beliefs and institutions, are important for project success. Surprisingly, there is little evidence that national context systematically influences project outcomes. We also find evidence of synergies between pairs of outcomes, particularly between ecological and economic success. We suggest that well-designed and implemented projects can overcome many of the obstacles imposed by local and national conditions to succeed in multiple domains.

  11. Bayesian Hierarchical Models to Augment the Mediterranean Forecast System

    Science.gov (United States)

    2016-06-07

    year. Our goal is to develop an ensemble ocean forecast methodology, using Bayesian Hierarchical Modelling (BHM) tools . The ocean ensemble forecast...from above); i.e. we assume Ut ~ Z Λt1/2. WORK COMPLETED The prototype MFS-Wind-BHM was designed and implemented based on stochastic...coding refinements we implemented on the prototype surface wind BHM. A DWF event in February 2005, in the Gulf of Lions, was identified for reforecast

  12. THE DESIGN AND PRODUCT OF NATIONAL 1:1000000 CARTOGRAPHIC DATA OF TOPOGRAPHIC MAP

    Directory of Open Access Journals (Sweden)

    G. Wang

    2016-06-01

    Full Text Available National administration of surveying, mapping and geoinformation started to launch the project of national fundamental geographic information database dynamic update in 2012. Among them, the 1:50000 database was updated once a year, furthermore the 1:250000 database was downsized and linkage-updated on the basis. In 2014, using the latest achievements of 1:250000 database, comprehensively update the 1:1000000 digital line graph database. At the same time, generate cartographic data of topographic map and digital elevation model data. This article mainly introduce national 1:1000000 cartographic data of topographic map, include feature content, database structure, Database-driven Mapping technology, workflow and so on.

  13. TECHNOLOGY OF ART AND DESIGN ANALYSIS ON THE CASE STUDY MALE DAGHESTAN NATIONAL COSTUME

    Directory of Open Access Journals (Sweden)

    T. M. Serova

    2014-01-01

    Full Text Available The article considers the stages of artistic analysis of masculine humeral service widespread on the territory of Daghestan in the nineteenth and early twentieth centuries. For example Circassian presents illustrative material: photos, technical drawing, scan cut. The results of the artistic design of the analysis are shown in table form and in the quality of the chart. The elements identified male costume can be used in design designing modern service. 

  14. Report of the workshop on evidence-based design of national wildlife health programs

    Science.gov (United States)

    Nguyen, Natalie T.; Duff, J. Paul; Gavier-Widén, Dolores; Grillo, Tiggy; He, Hongxuan; Lee, Hang; Ratanakorn, Parntep; Rijks, Jolianne M.; Ryser-Degiorgis, Marie-Pierre; Sleeman, Jonathan M.; Stephen, Craig; Tana, Toni; Uhart, Marcela; Zimmer , Patrick

    2017-05-08

    SummaryThis report summarizes a Wildlife Disease Association sponsored workshop held in 2016. The overall objective of the workshop was to use available evidence and selected subject matter expertise to define the essential functions of a National Wildlife Health Program and the resources needed to deliver a robust and reliable program, including the basic infrastructure, workforce, data and information systems, governance, organizational capacity, and essential features, such as wildlife disease surveillance, diagnostic services, and epidemiological investigation. This workshop also provided the means to begin the process of defining the essential attributes of a national wildlife health program that could be scalable and adaptable to each nation’s needs.

  15. 78 FR 21495 - Unblocking of Specially Designated Nationals and Blocked Persons Pursuant To Executive Order 12978

    Science.gov (United States)

    2013-04-10

    ... identifying information for the following individuals previously designated pursuant to Order: ] 1. PUENTE.... PUENTE GONZALEZ, Carlos Alberto; DOB 28 Nov 1937; Cedula No. 2449885 (Colombia); Passport...

  16. Hierarchical Geometric Constraint Model for Parametric Feature Based Modeling

    Institute of Scientific and Technical Information of China (English)

    高曙明; 彭群生

    1997-01-01

    A new geometric constraint model is described,which is hierarchical and suitable for parametric feature based modeling.In this model,different levels of geometric information are repesented to support various stages of a design process.An efficient approach to parametric feature based modeling is also presented,adopting the high level geometric constraint model.The low level geometric model such as B-reps can be derived automatically from the hig level geometric constraint model,enabling designers to perform their task of detailed design.

  17. Preliminary Feasibility, Design, and Hazard Analysis of a Boiling Water Test Loop Within the Idaho National Laboratory Advanced Test Reactor National Scientific User Facility

    Energy Technology Data Exchange (ETDEWEB)

    Douglas M. Gerstner

    2009-05-01

    The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The ATR and its support facilities are located at the Idaho National Laboratory (INL). A Boiling Water Test Loop (BWTL) is being designed for one of the irradiation test positions within the. The objective of the new loop will be to simulate boiling water reactor (BWR) conditions to support clad corrosion and related reactor material testing. Further it will accommodate power ramping tests of candidate high burn-up fuels and fuel pins/rods for the commercial BWR utilities. The BWTL will be much like the pressurized water loops already in service in 5 of the 9 “flux traps” (region of enhanced neutron flux) in the ATR. The loop coolant will be isolated from the primary coolant system so that the loop’s temperature, pressure, flow rate, and water chemistry can be independently controlled. This paper presents the proposed general design of the in-core and auxiliary BWTL systems; the preliminary results of the neutronics and thermal hydraulics analyses; and the preliminary hazard analysis for safe normal and transient BWTL and ATR operation.

  18. Guided hierarchical co-assembly of soft patchy nanoparticles

    Science.gov (United States)

    Gröschel, André H.; Walther, Andreas; Löbling, Tina I.; Schacher, Felix H.; Schmalz, Holger; Müller, Axel H. E.

    2013-11-01

    The concept of hierarchical bottom-up structuring commonly encountered in natural materials provides inspiration for the design of complex artificial materials with advanced functionalities. Natural processes have achieved the orchestration of multicomponent systems across many length scales with very high precision, but man-made self-assemblies still face obstacles in realizing well-defined hierarchical structures. In particle-based self-assembly, the challenge is to program symmetries and periodicities of superstructures by providing monodisperse building blocks with suitable shape anisotropy or anisotropic interaction patterns (`patches'). Irregularities in particle architecture are intolerable because they generate defects that amplify throughout the hierarchical levels. For patchy microscopic hard colloids, this challenge has been approached by using top-down methods (such as metal shading or microcontact printing), enabling molecule-like directionality during aggregation. However, both top-down procedures and particulate systems based on molecular assembly struggle to fabricate patchy particles controllably in the desired size regime (10-100nm). Here we introduce the co-assembly of dynamic patchy nanoparticles--that is, soft patchy nanoparticles that are intrinsically self-assembled and monodisperse--as a modular approach for producing well-ordered binary and ternary supracolloidal hierarchical assemblies. We bridge up to three hierarchical levels by guiding triblock terpolymers (length scale ~10nm) to form soft patchy nanoparticles (20-50nm) of different symmetries that, in combination, co-assemble into substructured, compartmentalized materials (>10μm) with predictable and tunable nanoscale periodicities. We establish how molecular control over polymer composition programs the building block symmetries and regulates particle positioning, offering a route to well-ordered mixed mesostructures of high complexity.

  19. 77 FR 74918 - Unblocking of Specially Designated Nationals and Blocked Persons Pursuant to Executive Order 12978

    Science.gov (United States)

    2012-12-18

    ... (Colombia) (individual) . ] 10. FLOREZ UPEGUI, Carlos Jairo, c/o FLOREZ HERMANOS LTDA., Medellin, Colombia; nationality Colombia; citizen Colombia; Cedula No. 70660584 (Colombia) (individual) . 11. FLOREZ UPEGUI, Elkin de Jesus, c/o FLOREZ HERMANOS LTDA., Medellin, Colombia; c/o INVERSIONES FLOREZ Y FLOREZ Y CIA S.C.A...

  20. 77 FR 33561 - Unblocking of Specially Designated Nationals and Blocked Persons Pursuant to Executive Order 12978

    Science.gov (United States)

    2012-06-06

    ..., Colonia Americana, Guadalajara, Jalisco, Mexico; Ignacio Ramos Praslow 640, Guadalajara, Jalisco, Mexico; DOB 18 Apr 1942; POB Ciudad Guzman, Jalisco, Mexico; citizen Mexico; nationality Mexico; C.U.R.P. LARL420418HJCRNS01 (Mexico) (individual) Entities 1. CORPORACION CLUB DEPORTIVO TULUA (a.k.a. CORTULUA), Carrera...

  1. Implications of sampling design and sample size for national carbon accounting systems

    Science.gov (United States)

    Michael Köhl; Andrew Lister; Charles T. Scott; Thomas Baldauf; Daniel. Plugge

    2011-01-01

    Countries willing to adopt a REDD regime need to establish a national Measurement, Reporting and Verification (MRV) system that provides information on forest carbon stocks and carbon stock changes. Due to the extensive areas covered by forests the information is generally obtained by sample based surveys. Most operational sampling approaches utilize a combination of...

  2. Research-Based Curriculum Design for Multicultural School Music: Reflections on a National Project in Guyana

    Science.gov (United States)

    Sagar, Rohan; Hebert, David G.

    2015-01-01

    This article reports on an applied ethnomusicological and historical study that guided the development of a new music curriculum for schools in Guyana, a multi-ethnic and postcolonial nation in Latin America. We establish our rationale with an introduction to Guyana and the status quo of its school music education, then embark on examining the…

  3. Journal Article: EPA's National Dioxin Air Monitoring Network (Ndamn): Design, Implementation, and Final Results

    Science.gov (United States)

    The U.S. Environmental Protection Agency (U.S. EPA) established the National Dioxin Air Monitoring Network (NDAMN) in June of 1998, and operated it until November of 2004. The objective of NDAMN was to determine background air concentrations of polychlorinated dibenzo-p-dioxins (...

  4. 75 FR 76319 - Amendments to National Marine Sanctuary Regulations Regarding Low Overflights in Designated Zones

    Science.gov (United States)

    2010-12-08

    ... within one nautical mile of Flattery Rocks, Quillayute Needles, or Copalis National Wildlife Refuge, or within one nautical mile seaward from the coastal boundary of the sanctuary. These restrictions vary... restrictions are not depicted on current FAA aeronautical charts. The FAA has advised NOAA that if...

  5. 76 FR 294 - Amendments to National Marine Sanctuary Regulations Regarding Low Overflights in Designated Zones

    Science.gov (United States)

    2011-01-04

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF COMMERCE... Sanctuaries (ONMS), National Oceanic and Atmospheric Administration (NOAA), Department of Commerce (DOC... 0648-AX79 by any one of the following methods: Electronic Submissions: Submit all electronic public...

  6. The enhanced forest inventory and analysis program - national sampling design and estimation procedures

    Science.gov (United States)

    William A. Bechtold; Paul L. Patterson; [Editors

    2005-01-01

    The Forest Inventory and Analysis (FIA) Program of the U.S. Department of Agriculture Forest Service is in the process of moving from a system of quasiindependent, regional, periodic inventories to an enhanced program featuring greater national consistency, annual measurement of a proportion of plots in each State, new reporting requirements, and integration with the...

  7. A sense of place: Ecoregional design at Mesa Verde National Park

    Science.gov (United States)

    Robert G. Bailey

    2012-01-01

    When the National Park Service was established in 1916, the new agency inherited an architectural legacy developed by private interests, particularly the railroads. This legacy included Northern Pacific's Old Faithful Inn in Yellowstone and Santa Fe's El Tovar at the south rim of the Grand Canyon, both built in the Swiss Chalet­Norway Villa tradition. This...

  8. 78 FR 72751 - Unblocking of Specially Designated Nationals and Blocked Persons Pursuant to the Foreign...

    Science.gov (United States)

    2013-12-03

    ... C.V., Chihuahua, Chihuahua, Mexico; Fernando De Borja 509, Chihuahua, Chihuahua 31240, Mexico; DOB 04 Nov 1945; POB Aquiles Serdan, Chihuahua, Mexico; nationality Mexico; citizen Mexico; R.F.C... SERVICIO AEREO LEO LOPEZ, S.A. DE C.V., Chihuahua, Chihuahua, Mexico; Calle Septima No. 1401, Villa...

  9. 77 FR 33562 - Unblocking of Specially Designated Nationals and Blocked Persons Pursuant to the Foreign...

    Science.gov (United States)

    2012-06-06

    ..., c/o PV STAR, S.A. DE C.V., Chihuahua, Chihuahua, Mexico; Calle Cedro No. 804, Chihuahua, Chihuahua, Mexico; DOB 14 Mar 1960; POB Chihuahua, Chihuahua, Mexico; citizen Mexico; nationality Mexico; C.U.R.P... 4. PV STAR, S.A. DE C.V., Ohio No. 4123, Col. Quintas Del Sol, Chihuahua, Chihuahua 31214, Mexico;...

  10. 77 FR 30590 - Unblocking of Specially Designated Nationals and Blocked Persons Pursuant to the Foreign...

    Science.gov (United States)

    2012-05-23

    ... significant foreign narcotics traffickers as identified by the President. In addition, the Secretary of the... Secretary of Defense, the Secretary of State, and the Secretary of Homeland Security when designating and..., a person designated pursuant to the Kingpin Act; and/or (3) playing a significant role in...

  11. National Ignition Facility sub-system design requirements computer system SSDR 1.5.1

    Energy Technology Data Exchange (ETDEWEB)

    Spann, J.; VanArsdall, P.; Bliss, E.

    1996-09-05

    This System Design Requirement document establishes the performance, design, development and test requirements for the Computer System, WBS 1.5.1 which is part of the NIF Integrated Computer Control System (ICCS). This document responds directly to the requirements detailed in ICCS (WBS 1.5) which is the document directly above.

  12. National Ignition Facility sub-system design requirements integrated timing system SSDR 1.5.3

    Energy Technology Data Exchange (ETDEWEB)

    Wiedwald, J.; Van Aersau, P.; Bliss, E.

    1996-08-26

    This System Design Requirement document establishes the performance, design, development, and test requirements for the Integrated Timing System, WBS 1.5.3 which is part of the NIF Integrated Computer Control System (ICCS). The Integrated Timing System provides all temporally-critical hardware triggers to components and equipment in other NIF systems.

  13. 76 FR 38533 - Alphabetical Listings: Specially Designated Nationals and Blocked Persons; Blocked Vessels...

    Science.gov (United States)

    2011-06-30

    ..., specially designated terrorists, specially designated global terrorists, foreign terrorist organizations...-6, Wheelock Hse, 20 Pedder St, Central, Hong Kong; PO Box 1894, Baniyas St, Deira, Dubai City, United Arab Emirates; PO Box 1894, Al Wasl Rd, Jumeirah, Dubai, United Arab Emirates; 43 Avenue...

  14. Discovering hierarchical structure in normal relational data

    DEFF Research Database (Denmark)

    Schmidt, Mikkel Nørgaard; Herlau, Tue; Mørup, Morten

    2014-01-01

    Hierarchical clustering is a widely used tool for structuring and visualizing complex data using similarity. Traditionally, hierarchical clustering is based on local heuristics that do not explicitly provide assessment of the statistical saliency of the extracted hierarchy. We propose a non-param...

  15. Discursive Hierarchical Patterning in Economics Cases

    Science.gov (United States)

    Lung, Jane

    2011-01-01

    This paper attempts to apply Lung's (2008) model of the discursive hierarchical patterning of cases to a closer and more specific study of Economics cases and proposes a model of the distinct discursive hierarchical patterning of the same. It examines a corpus of 150 Economics cases with a view to uncovering the patterns of discourse construction.…

  16. A Model of Hierarchical Key Assignment Scheme

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhigang; ZHAO Jing; XU Maozhi

    2006-01-01

    A model of the hierarchical key assignment scheme is approached in this paper, which can be used with any cryptography algorithm. Besides, the optimal dynamic control property of a hierarchical key assignment scheme will be defined in this paper. Also, our scheme model will meet this property.

  17. Design and Fabrication of a Highly Integrated Silicon Detector for the STAR Experiment at Brookhaven National Laboratory

    CERN Document Server

    Buck, Benjamin; Bessuille, Jason; Cepeda, Mario; Johnson, Thomas; Kelsey, James; van Nieuwenhuizen, Gerrit; Visser, Gerard

    2014-01-01

    We present the design of a detector used as a particle tracking device in the STAR experiment at the RHIC collider of Brookhaven National Laboratories. The "stave," 24 of which make up the completed detector, is a highly mechanically integrated design comprised of 6 custom silicon sensors mounted on a Kapton substrate. 4608 wire bonds connect these sensors to 36 analog front-end chips which are mounted on the same substrate. Power and signal connectivity from the hybrid to the front-end chips is provided by wire bonds. The entire circuit is mounted on a carbon fiber base co-cured to the Kapton substrate. We present the unique design challenges for this detector and some novel techniques for overcoming them.

  18. Galaxy formation through hierarchical clustering

    Science.gov (United States)

    White, Simon D. M.; Frenk, Carlos S.

    1991-01-01

    Analytic methods for studying the formation of galaxies by gas condensation within massive dark halos are presented. The present scheme applies to cosmogonies where structure grows through hierarchical clustering of a mixture of gas and dissipationless dark matter. The simplest models consistent with the current understanding of N-body work on dissipationless clustering, and that of numerical and analytic work on gas evolution and cooling are adopted. Standard models for the evolution of the stellar population are also employed, and new models for the way star formation heats and enriches the surrounding gas are constructed. Detailed results are presented for a cold dark matter universe with Omega = 1 and H(0) = 50 km/s/Mpc, but the present methods are applicable to other models. The present luminosity functions contain significantly more faint galaxies than are observed.

  19. Groups possessing extensive hierarchical decompositions

    CERN Document Server

    Januszkiewicz, T; Leary, I J

    2009-01-01

    Kropholler's class of groups is the smallest class of groups which contains all finite groups and is closed under the following operator: whenever $G$ admits a finite-dimensional contractible $G$-CW-complex in which all stabilizer groups are in the class, then $G$ is itself in the class. Kropholler's class admits a hierarchical structure, i.e., a natural filtration indexed by the ordinals. For example, stage 0 of the hierarchy is the class of all finite groups, and stage 1 contains all groups of finite virtual cohomological dimension. We show that for each countable ordinal $\\alpha$, there is a countable group that is in Kropholler's class which does not appear until the $\\alpha+1$st stage of the hierarchy. Previously this was known only for $\\alpha= 0$, 1 and 2. The groups that we construct contain torsion. We also review the construction of a torsion-free group that lies in the third stage of the hierarchy.

  20. Quantum transport through hierarchical structures.

    Science.gov (United States)

    Boettcher, S; Varghese, C; Novotny, M A

    2011-04-01

    The transport of quantum electrons through hierarchical lattices is of interest because such lattices have some properties of both regular lattices and random systems. We calculate the electron transmission as a function of energy in the tight-binding approximation for two related Hanoi networks. HN3 is a Hanoi network with every site having three bonds. HN5 has additional bonds added to HN3 to make the average number of bonds per site equal to five. We present a renormalization group approach to solve the matrix equation involved in this quantum transport calculation. We observe band gaps in HN3, while no such band gaps are observed in linear networks or in HN5. We provide a detailed scaling analysis near the edges of these band gaps.

  1. Hierarchical networks of scientific journals

    CERN Document Server

    Palla, Gergely; Mones, Enys; Pollner, Péter; Vicsek, Tamás

    2015-01-01

    Scientific journals are the repositories of the gradually accumulating knowledge of mankind about the world surrounding us. Just as our knowledge is organised into classes ranging from major disciplines, subjects and fields to increasingly specific topics, journals can also be categorised into groups using various metrics. In addition to the set of topics characteristic for a journal, they can also be ranked regarding their relevance from the point of overall influence. One widespread measure is impact factor, but in the present paper we intend to reconstruct a much more detailed description by studying the hierarchical relations between the journals based on citation data. We use a measure related to the notion of m-reaching centrality and find a network which shows the level of influence of a journal from the point of the direction and efficiency with which information spreads through the network. We can also obtain an alternative network using a suitably modified nested hierarchy extraction method applied ...

  2. Adaptive Sampling in Hierarchical Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Knap, J; Barton, N R; Hornung, R D; Arsenlis, A; Becker, R; Jefferson, D R

    2007-07-09

    We propose an adaptive sampling methodology for hierarchical multi-scale simulation. The method utilizes a moving kriging interpolation to significantly reduce the number of evaluations of finer-scale response functions to provide essential constitutive information to a coarser-scale simulation model. The underlying interpolation scheme is unstructured and adaptive to handle the transient nature of a simulation. To handle the dynamic construction and searching of a potentially large set of finer-scale response data, we employ a dynamic metric tree database. We study the performance of our adaptive sampling methodology for a two-level multi-scale model involving a coarse-scale finite element simulation and a finer-scale crystal plasticity based constitutive law.

  3. Multicollinearity in hierarchical linear models.

    Science.gov (United States)

    Yu, Han; Jiang, Shanhe; Land, Kenneth C

    2015-09-01

    This study investigates an ill-posed problem (multicollinearity) in Hierarchical Linear Models from both the data and the model perspectives. We propose an intuitive, effective approach to diagnosing the presence of multicollinearity and its remedies in this class of models. A simulation study demonstrates the impacts of multicollinearity on coefficient estimates, associated standard errors, and variance components at various levels of multicollinearity for finite sample sizes typical in social science studies. We further investigate the role multicollinearity plays at each level for estimation of coefficient parameters in terms of shrinkage. Based on these analyses, we recommend a top-down method for assessing multicollinearity in HLMs that first examines the contextual predictors (Level-2 in a two-level model) and then the individual predictors (Level-1) and uses the results for data collection, research problem redefinition, model re-specification, variable selection and estimation of a final model.

  4. A neural signature of hierarchical reinforcement learning.

    Science.gov (United States)

    Ribas-Fernandes, José J F; Solway, Alec; Diuk, Carlos; McGuire, Joseph T; Barto, Andrew G; Niv, Yael; Botvinick, Matthew M

    2011-07-28

    Human behavior displays hierarchical structure: simple actions cohere into subtask sequences, which work together to accomplish overall task goals. Although the neural substrates of such hierarchy have been the target of increasing research, they remain poorly understood. We propose that the computations supporting hierarchical behavior may relate to those in hierarchical reinforcement learning (HRL), a machine-learning framework that extends reinforcement-learning mechanisms into hierarchical domains. To test this, we leveraged a distinctive prediction arising from HRL. In ordinary reinforcement learning, reward prediction errors are computed when there is an unanticipated change in the prospects for accomplishing overall task goals. HRL entails that prediction errors should also occur in relation to task subgoals. In three neuroimaging studies we observed neural responses consistent with such subgoal-related reward prediction errors, within structures previously implicated in reinforcement learning. The results reported support the relevance of HRL to the neural processes underlying hierarchical behavior.

  5. Hierarchical Identity-Based Lossy Trapdoor Functions

    CERN Document Server

    Escala, Alex; Libert, Benoit; Rafols, Carla

    2012-01-01

    Lossy trapdoor functions, introduced by Peikert and Waters (STOC'08), have received a lot of attention in the last years, because of their wide range of applications in theoretical cryptography. The notion has been recently extended to the identity-based scenario by Bellare et al. (Eurocrypt'12). We provide one more step in this direction, by considering the notion of hierarchical identity-based lossy trapdoor functions (HIB-LTDFs). Hierarchical identity-based cryptography generalizes identitybased cryptography in the sense that identities are organized in a hierarchical way; a parent identity has more power than its descendants, because it can generate valid secret keys for them. Hierarchical identity-based cryptography has been proved very useful both for practical applications and to establish theoretical relations with other cryptographic primitives. In order to realize HIB-LTDFs, we first build a weakly secure hierarchical predicate encryption scheme. This scheme, which may be of independent interest, is...

  6. Hierarchical characterization procedures for dimensional metrology

    Science.gov (United States)

    MacKinnon, David; Beraldin, Jean-Angelo; Cournoyer, Luc; Carrier, Benjamin

    2011-03-01

    We present a series of dimensional metrology procedures for evaluating the geometrical performance of a 3D imaging system that have either been designed or modified from existing procedures to ensure, where possible, statistical traceability of each characteristic value from the certified reference surface to the certifying laboratory. Because there are currently no internationally-accepted standards for characterizing 3D imaging systems, these procedures have been designed to avoid using characteristic values provided by the vendors of 3D imaging systems. For this paper, we focus only on characteristics related to geometric surface properties, dividing them into surface form precision and surface fit trueness. These characteristics have been selected to be familiar to operators of 3D imaging systems that use Geometrical Dimensioning and Tolerancing (GD&T). The procedures for generating characteristic values would form the basis of either a volumetric or application-specific analysis of the characteristic profile of a 3D imaging system. We use a hierarchical approach in which each procedure builds on either certified reference values or previously-generated characteristic values. Starting from one of three classes of surface forms, we demonstrate how procedures for quantifying for flatness, roundness, angularity, diameter error, angle error, sphere-spacing error, and unidirectional and bidirectional plane-spacing error are built upon each other. We demonstrate how these procedures can be used as part of a process for characterizing the geometrical performance of a 3D imaging system.

  7. Automatic layout of structured hierarchical reports.

    Science.gov (United States)

    Bakke, Eirik; Karger, David R; Miller, Robert C

    2013-12-01

    Domain-specific database applications tend to contain a sizable number of table-, form-, and report-style views that must each be designed and maintained by a software developer. A significant part of this job is the necessary tweaking of low-level presentation details such as label placements, text field dimensions, list or table styles, and so on. In this paper, we present a horizontally constrained layout management algorithm that automates the display of structured hierarchical data using the traditional visual idioms of hand-designed database UIs: tables, multi-column forms, and outline-style indented lists. We compare our system with pure outline and nested table layouts with respect to space efficiency and readability, the latter with an online user study on 27 subjects. Our layouts are 3.9 and 1.6 times more compact on average than outline layouts and horizontally unconstrained table layouts, respectively, and are as readable as table layouts even for large datasets.

  8. Hierarchical mutual information for the comparison of hierarchical community structures in complex networks

    CERN Document Server

    Perotti, Juan Ignacio; Caldarelli, Guido

    2015-01-01

    The quest for a quantitative characterization of community and modular structure of complex networks produced a variety of methods and algorithms to classify different networks. However, it is not clear if such methods provide consistent, robust and meaningful results when considering hierarchies as a whole. Part of the problem is the lack of a similarity measure for the comparison of hierarchical community structures. In this work we give a contribution by introducing the {\\it hierarchical mutual information}, which is a generalization of the traditional mutual information, and allows to compare hierarchical partitions and hierarchical community structures. The {\\it normalized} version of the hierarchical mutual information should behave analogously to the traditional normalized mutual information. Here, the correct behavior of the hierarchical mutual information is corroborated on an extensive battery of numerical experiments. The experiments are performed on artificial hierarchies, and on the hierarchical ...

  9. Designing for action: adapting and implementing a community-based newborn care package to affect national change in Uganda.

    Science.gov (United States)

    Waiswa, Peter; Namazzi, Gertrude; Kerber, Kate; Peterson, Stefan

    2015-01-01

    There is a lack of literature on how to adapt new evidence-based interventions for maternal and newborn care into local health systems and policy for rapid scale-up, particularly for community-based interventions in low-income settings. The Uganda Newborn Study (UNEST) was a cluster randomised control trial to test a community-based care package which was rapidly taken up at national level. Understanding this process may help inform other studies looking to design and evaluate with scale-up in mind. This study aimed to describe the process of using evidence to design a community-based maternal and newborn care package in rural eastern Uganda, and to determine the dissemination and advocacy approaches used to facilitate rapid policy change and national uptake. We reviewed UNEST project literature including meeting reports and minutes, supervision reports, and annual and midterm reports. National stakeholders, project and district staff were interviewed regarding their role in the study and perceptions of what contributed to uptake of the package under evaluation. Data related to UNEST formative research, study design, implementation and policy influence were extracted and analysed. An advisory committee of key players in development of maternal and newborn policies and programmes in Uganda was constituted from many agencies and disciplines. Baseline qualitative and quantitative data collection was done at district, community and facility level to examine applicability of aspects of a proposed newborn care package to the local setting. Data were summarised and presented to stakeholders to adapt the intervention that was ultimately tested. Quarterly monitoring of key activities and events around the interventions were used to further inform implementation. The UNEST training package, home visit schedule and behaviour change counselling materials were incorporated into the national Village Health Team and Integrated Community Case Management packages while the study

  10. Don Edwards National Wildlife Refuge : Ducks Unlimited Pond A6 Draft Design : October 2007

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Ducks Unlimited (DU) received a grant from the North American Wetlands Conservation Council to design and implement the proposed restoration on Pond A6. This grant...

  11. Rational design of hierarchically-structured CuBi2O4 composites by deliberate manipulation of the nucleation and growth kinetics of CuBi2O4 for environmental applications

    Science.gov (United States)

    Oh, Wen-Da; Lua, Shun-Kuang; Dong, Zhili; Lim, Teik-Thye

    2016-01-01

    A versatile, eco-friendly synthesis scheme was developed to fabricate a series of hierarchically-structured CuBi2O4 composites for environmental applications. By simple tuning of the synthesis protocol (i.e. controlling the ethylene glycol to water ratio in the reaction matrix and employing different auxiliary metal precursors consisting of Cu2+, Co2+ or Fe3+ species), deposition of various metal oxides on CuBi2O4 was achieved. The proposed one-pot synthesis protocol utilizes the fast nucleation and controlled growth kinetics of CuBi2O4 to deliberately immobilize the desired metal oxides on the surface of the CuBi2O4. The manipulation of the diffusion rate, mass transfer kinetics and atomic mobility of the metal precursors by controlling the viscosity and dielectric properties of the reaction matrix lead to the formation of different CuBi2O4 composites with the desired properties. The synergistic coupling effect between the CuBi2O4 and deposited metal oxide contributed to the superior performance of the novel CuBi2O4 composites. The CuBi2O4 composites demonstrate excellent potential for various environmental applications such as being a catalyst for generating sulfate radicals from peroxymonosulfate for organic pollutant removal in water and being a disinfectant. The proposed green synthesis protocol is simple and offers flexibility for fabricating hierarchically-structured CuBi2O4 composites with enhanced properties for targeted applications.A versatile, eco-friendly synthesis scheme was developed to fabricate a series of hierarchically-structured CuBi2O4 composites for environmental applications. By simple tuning of the synthesis protocol (i.e. controlling the ethylene glycol to water ratio in the reaction matrix and employing different auxiliary metal precursors consisting of Cu2+, Co2+ or Fe3+ species), deposition of various metal oxides on CuBi2O4 was achieved. The proposed one-pot synthesis protocol utilizes the fast nucleation and controlled growth kinetics

  12. Target Area design basis and system performance for the National Ignition Facility. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Tobin, M.; Karpenko, V.; Hagans, K.; Anderson, A.; Latkowski, J.; Warren, R. [Lawrence Livermore National Lab., CA (United States); Wavrik, R.; Garcia, R.; Boyes, J. [Sandia National Labs., Albuquerque, NM (United States)

    1994-10-01

    The NIF Target Area is designed to confine the ICF target experiments leading up to and including fusion ignition and gain. The Target Area will provide appropriate in-chamber conditions before, during, and after each shot. The repeated introduction of large amounts of laser energy into the chamber and emission of fusion energy from targets represents a new challenge in ICF facility design. Prior to a shot, the facility provides proper illumination geometry, target chamber vacuum, and a stable platform for the target and its diagnostics. During a shot, the impact of the energy introduced into the chamber is minimized, and workers and the public are protected from excessive prompt radiation doses. After the shot, the residual radioactivation is managed to allow required accessibility. Tritium and other radioactive wastes are confined and disposed of. Diagnostic data is also retrieved, and the facility is readied for the next shot. The Target Area will accommodate yields up to 20 MJ, and its design lifetime is 30 years. The Target Area provides the personnel access needed to support the use precision diagnostics. The annual shot mix for design purposes is shown. Designing to this experimental envelope ensures the ability and flexibility to move through the experimental campaign to ignition efficiently.

  13. Analysis and Optimisation of Hierarchically Scheduled Multiprocessor Embedded Systems

    DEFF Research Database (Denmark)

    Pop, Traian; Pop, Paul; Eles, Petru;

    2008-01-01

    , they are organised in a hierarchy. In this paper, we first develop a holistic scheduling and schedulability analysis that determines the timing properties of a hierarchically scheduled system. Second, we address design problems that are characteristic to such hierarchically scheduled systems: assignment......We present an approach to the analysis and optimisation of heterogeneous multiprocessor embedded systems. The systems are heterogeneous not only in terms of hardware components, but also in terms of communication protocols and scheduling policies. When several scheduling policies share a resource...... of scheduling policies to tasks, mapping of tasks to hardware components, and the scheduling of the activities. We also present several algorithms for solving these problems. Our heuristics are able to find schedulable implementations under limited resources, achieving an efficient utilisation of the system...

  14. Disturbance observer based hierarchical control of coaxial-rotor UAV.

    Science.gov (United States)

    Mokhtari, M Rida; Cherki, Brahim; Braham, Amal Choukchou

    2017-03-01

    This paper propose an hierarchical controller based on a new disturbance observer with finite time convergence (FTDO) to solve the path tracking of a small coaxial-rotor-typs Unmanned Aerial Vehicles (UAVs) despite of unknown aerodynamic efforts. The hierarchical control technique is used to separate the flight control problem into an inner loop that controls attitude and an outer loop that controls the thrust force acting on the vehicle. The new disturbance observer with finite time convergence is intergated to online estimate the unknown uncertainties and disturbances and to actively compensate them in finite time.The analysis further extends to the design of a control law that takes the disturbance estimation procedure into account. Numerical simulations are carried out to demonstrate the efficiency of the proposed control strategy.

  15. High fracture toughness in a hierarchical nanostructured zirconium

    Energy Technology Data Exchange (ETDEWEB)

    Li, Ming [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, 066004 Qinhuangdao (China); College of Mechanical Engineering, Yanshan University, 066004 Qinhuangdao (China); Guo, Defeng; Ma, Tengyun; Zhang, Guosheng; Shi, Yindong [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, 066004 Qinhuangdao (China); Zhang, Xiangyi, E-mail: xyzh66@ysu.edu.cn [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, 066004 Qinhuangdao (China)

    2014-06-01

    Nanocrystalline metals usually exhibit a high strength but a disappointingly low ductility and toughness, which limit their practical utility. Here, we report a high fracture toughness (K{sub IC}∼117 MPa m{sup 1/2}) in a hierarchical nanostructured Zr that consists of nano-, sub-micrometer- and micrometer-sized grains, which is much larger than that K{sub IC}∼78 MPa m{sup 1/2} in coarse-grained Zr. This hierarchical nanostructured Zr shows a good combination of yield strength (σ{sub s}∼550 MPa) and fracture toughness as compared with its coarse-grained counterpart. We expect that these results will have implications in the enhancement of fracture toughness of nanocrystalline materials and in the design of high-performance structural materials.

  16. Biominerals--hierarchical nanocomposites: the example of bone.

    Science.gov (United States)

    Beniash, Elia

    2011-01-01

    Many organisms incorporate inorganic solids in their tissues to enhance their functional, primarily mechanical, properties. These mineralized tissues, also called biominerals, are unique organo-mineral nanocomposites, organized at several hierarchical levels, from nano- to macroscale. Unlike man-made composite materials, which often are simple physical blends of their components, the organic and inorganic phases in biominerals interface at the molecular level. Although these tissues are made of relatively weak components under ambient conditions, their hierarchical structural organization and intimate interactions between different elements lead to superior mechanical properties. Understanding basic principles of formation, structure, and functional properties of these tissues might lead to novel bioinspired strategies for material design and better treatments for diseases of the mineralized tissues. This review focuses on general principles of structural organization, formation, and functional properties of biominerals on the example the bone tissues.

  17. Hierarchically porous carbon nanosheets from waste coffee grounds for supercapacitors.

    Science.gov (United States)

    Yun, Young Soo; Park, Min Hong; Hong, Sung Ju; Lee, Min Eui; Park, Yung Woo; Jin, Hyoung-Joon

    2015-02-18

    The nanostructure design of porous carbon-based electrode materials is key to improving the electrochemical performance of supercapacitors. In this study, hierarchically porous carbon nanosheets (HP-CNSs) were fabricated using waste coffee grounds by in situ carbonization and activation processes using KOH. Despite the simple synthesis process, the HP-CNSs had a high aspect ratio nanostructure (∼20 nm thickness to several micrometers in lateral size), a high specific surface area of 1945.7 m(2) g(-1), numerous heteroatoms, and good electrical transport properties, as well as hierarchically porous characteristics (0.5-10 nm in size). HP-CNS-based supercapacitors showed a specific energy of 35.4 Wh kg(-1) at 11250 W kg(-1) and of 23 Wh kg(-1) for a 3 s charge/discharge current rate corresponding to a specific power of 30000 W kg(-1). Additionally, the HP-CNS supercapacitors demonstrated good cyclic performance over 5000 cycles.

  18. An interference cancellation strategy for broadcast in hierarchical cell structure

    KAUST Repository

    Yang, Yuli

    2014-12-01

    In this paper, a hierarchical cell structure is considered, where public safety broadcasting is fulfilled in a femtocell located within a macrocell. In the femtocell, also known as local cell, an access point broadcasts to each local node (LN) over an orthogonal frequency sub-band independently. Since the local cell shares the spectrum licensed to the macrocell, a given LN is interfered by transmissions of the macrocell user (MU) in the same sub-band. To improve the broadcast performance in the local cell, a novel scheme is proposed to mitigate the interference from the MU to the LN while achieving diversity gain. For the sake of performance evaluation, ergodic capacity of the proposed scheme is quantified and a corresponding closed-form expression is obtained. By comparing with the traditional scheme that suffers from the MU\\'s interference, numerical results substantiate the advantage of the proposed scheme and provide a useful tool for the broadcast design in hierarchical cell systems.

  19. Hierarchical decomposition considered inconvenient: self-adaptation across abstraction layers

    Science.gov (United States)

    Gallagher, John C.

    2012-06-01

    Hierarchy may be difficult, if not impossible, to avoid either in natural or artificially engineered systems. Nevertheless, hierarchical decomposition can be considered inconvenient in a number of ways that interfere with the construction of adaptive systems capable of full exploitation of unexpected opportunities in an operational environment. This paper will briefly review some of those inconveniences and suggest principles by which to circumvent them while maintaining the obviously beneficial, and perhaps inevitable, paradigm of hierarchical decomposition of engineering designs. The paper will illustrate the introduced principles by appeal to an example auto-adaptive flight controller for an insect-scale flapping-wing micro air vehicle. The paper will conclude with discussion of possible future applications and methodological extensions.

  20. A Heuristic Hierarchical Scheme for Academic Search and Retrieval

    DEFF Research Database (Denmark)

    Amolochitis, Emmanouil; Christou, Ioannis T.; Tan, Zheng-Hua

    2013-01-01

    We present PubSearch, a hybrid heuristic scheme for re-ranking academic papers retrieved from standard digital libraries such as the ACM Portal. The scheme is based on the hierarchical combination of a custom implementation of the term frequency heuristic, a time-depreciated citation score...... and a graph-theoretic computed score that relates the paper’s index terms with each other. We designed and developed a meta-search engine that submits user queries to standard digital repositories of academic publications and re-ranks the repository results using the hierarchical heuristic scheme. We evaluate...... in Information Retrieval including Normalized Discounted Cumulative Gain (NDCG), Expected Reciprocal Rank (ERR) as well as a newly introduced lexicographic rule (LEX) of ranking search results. In particular, PubSearch outperforms ACM Portal by more than 77% in terms of ERR, by more than 11% in terms of NDCG...

  1. Hierarchical Cellular Structures in High-Capacity Cellular Communication Systems

    CERN Document Server

    Jain, R K; Agrawal, N K

    2011-01-01

    In the prevailing cellular environment, it is important to provide the resources for the fluctuating traffic demand exactly in the place and at the time where and when they are needed. In this paper, we explored the ability of hierarchical cellular structures with inter layer reuse to increase the capacity of mobile communication network by applying total frequency hopping (T-FH) and adaptive frequency allocation (AFA) as a strategy to reuse the macro and micro cell resources without frequency planning in indoor pico cells [11]. The practical aspects for designing macro- micro cellular overlays in the existing big urban areas are also explained [4]. Femto cells are inducted in macro / micro / pico cells hierarchical structure to achieve the required QoS cost effectively.

  2. Hardware and software design for a National Instrument-based magnetic induction tomography system for prospective biomedical applications.

    Science.gov (United States)

    Wei, Hsin-Yu; Soleimani, Manuchehr

    2012-05-01

    Magnetic induction tomography (MIT) is a new and emerging type of tomography technique that is able to map the passive electromagnetic properties (in particular conductivity) of an object. Excitation coils are used to induce eddy currents in the medium, and the magnetic field produced by the induced eddy current is then sensed by the receiver coils. Because of its non-invasive and contactless feature, it becomes an attractive technique for many applications (especially in biomedical area) compared to traditional contact electrode-based electrical impedance tomography. Due to the low contrast in conductivity between biological tissues, an accurate and stable hardware system is necessary. Most MIT systems in the literature employ external signal generators, power amplifiers and highly stable down-conversion electronics to obtain a satisfactory phase measurement. However, this would increase design complexity substantially. In this paper, a National Instrument-based MIT system is developed at the University of Bath, aiming for biomedical applications. The system utilizes National Instrument products to accomplish all signal driving, switching and data acquisition tasks, which ease the system design whilst providing satisfactory performance. This paper presents a full-scaled medical MIT system, from the sensor and system hardware design, eddy current model verification to the image reconstruction software: the performance of this MIT instrumentation system is characterized in detail, including the system accuracy and system stability. The methods of solving eddy current problem are presented. The reconstructed images of detecting the presence of saline solutions are also included in this paper, which show the capability of national instrument products to be developed into a full-scaled biomedical MIT system, by demonstrating the practical experimental results.

  3. Winter National Design Engineering Show and Conference, Anaheim, CA, December 11-13, 1985, Conference Talks

    Science.gov (United States)

    1985-12-01

    Papers are presented on an interactive computer package for the design of spur and helical gears; helical spring and analysis software for m icrocomputers; the principles, justification and cost-benefits of CAD/CAM selection; technology transfer management; and materials processing in space. Topics discussed include the control of pneumatic noise in the workplace, the networking of micro CAD/CAM, finite element techniques for composite transmission shafts, finite-element thermal analysis of a resistive bus conduction with a joint interface, and the use of a two-dimensional finite element for optimal design. Consideration is given to data collection systems for the design engineer, tolerancing application for CAD, the commercial use of space, and the use of engineering management to reduce the risks of R&D.

  4. Experimental burn plot trial in the Kruger National Park: history, experimental design and suggestions for data analysis

    Directory of Open Access Journals (Sweden)

    R. Biggs

    2003-12-01

    Full Text Available The experimental burn plot (EBP trial initiated in 1954 is one of few ongoing long-termfire ecology research projects in Africa. The trial aims to assess the impacts of differentfire regimes in the Kruger National Park. Recent studies on the EBPs have raised questions as to the experimental design of the trial, and the appropriate model specificationwhen analysing data. Archival documentation reveals that the original design was modified on several occasions, related to changes in the park's fire policy. These modifications include the addition of extra plots, subdivision of plots and changes in treatmentsover time, and have resulted in a design which is only partially randomised. The representativity of the trial plots has been questioned on account of their relatively small size,the concentration of herbivores on especially the frequently burnt plots, and soil variation between plots. It is suggested that these factors be included as covariates inexplanatory models or that certain plots be excluded from data analysis based on resultsof independent studies of these factors. Suggestions are provided for the specificationof the experimental design when analysing data using Analysis of Variance. It is concluded that there is no practical alternative to treating the trial as a fully randomisedcomplete block design.

  5. Study on Designing Standards System Framework of Hainan National Breeding and Multiplication

    Institute of Scientific and Technical Information of China (English)

    Guanming CHE; Jing YANG; Yaqiong LIN; Liping WANG; Jinsong LI1

    2012-01-01

    A preliminary feasibility study was set up for the HNBM standard system. By introducing the set theory and basic methods of the solid geometry and adopting the Verman three-dimensional structure ideology innovatively, the standards system of Hainan National Breeding and Multiplication (HNBM) was studied with the four-di- mensional structure and integration by combining with the time dimension. The four- dimensional structure standards system will be useful for guiding the construction of the HNBM standards system, carrying on the division of labor and realizing the dy- namic development of the standards system. The standards set of HNBM helps to computer programming and information

  6. National Ignition Facility, subsystem design requirements beam control {ampersand} laser diagnostics SSDR 1.7

    Energy Technology Data Exchange (ETDEWEB)

    Bliss, E.

    1996-11-01

    This Subsystem Design Requirement document is a development specification that establishes the performance, design, development, and test requirements for the Alignment subsystem (WBS 1.7.1), Beam Diagnostics (WBS 1.7.2), and the Wavefront Control subsystem (WBS 1.7. 3) of the NIF Laser System (WBS 1.3). These three subsystems are collectively referred to as the Beam Control & Laser Diagnostics Subsystem. The NIF is a multi-pass, 192-beam, high-power, neodymium-glass laser that meets requirements set forth in the NIF SDR 002 (Laser System). 3 figs., 3 tabs.

  7. The Correlation between Traditional National Costume Design and National Dancing Costume Design%民族传统服饰和民族舞蹈服饰设计相关性

    Institute of Scientific and Technical Information of China (English)

    张颖; 张韬

    2015-01-01

    Costume is an important part of national culture. Dancing costumes can help performers show their graceful figures and give intuitive images to audience, delivering a clear signal in a silent way. They are not only the symbols of local culture, but also the integral part of dancing culture, and also capable of reflecting the connotations of multiple cultures. The paper mainly discusses the designing of both traditional national costume and national dancing costume and the correlation between the two.%服饰是民族文化中的重要组成部分。舞蹈者穿上舞蹈服饰,展现婀娜的体态,为观众展现直观的形象。在无声中,给人一种明确的信号,是地区文化的象征,也是舞蹈文化中的重要成分,从中也能够体现多种文化的内涵。文章在探讨课题时,主要从民族传统服饰、民族舞蹈服饰设计及两者的相关性进行具体的探讨,对于了解两者之间的关系具有十分重要的意义。

  8. Optical design and performance of the phase II inelastic scattering beamline at the National Synchrotron Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Caliebe, W.A.; Kao, C.-C.; Oversluizen, T.; Montanez, P.; Hastings, J.B. [National Synchrotron Light Source, Brookhaven National Laboratory, Upton New York, 11973 (United States); Caliebe, W.A. [Hamburger Synchrotronstrahlungslabor HASYLAB, Deutsches Elektronen-Synchrotron DESY, 22603Hamburg (Germany)] Krisch, M. [European Synchrotron Radiation Facility, F-38043Grenoble Cedex (France)

    1997-07-01

    We report the optical design and performance of the phase II inelastic scattering beamline at the National Synchrotron Light Source. The new beamline consists of a four-crystal Si(220) monochromator followed by a bent cylinder mirror. The monochromator is tunable from 5 to 10 keV with about 0.2 eV energy resolution throughout the tuning range. The size of the focused beam is about 0.5mm(H){times}0.3mm(V). {copyright} {ital 1997 American Institute of Physics.}

  9. A Hierarchical Security Architecture for Cyber-Physical Systems

    Energy Technology Data Exchange (ETDEWEB)

    Quanyan Zhu; Tamer Basar

    2011-08-01

    Security of control systems is becoming a pivotal concern in critical national infrastructures such as the power grid and nuclear plants. In this paper, we adopt a hierarchical viewpoint to these security issues, addressing security concerns at each level and emphasizing a holistic cross-layer philosophy for developing security solutions. We propose a bottom-up framework that establishes a model from the physical and control levels to the supervisory level, incorporating concerns from network and communication levels. We show that the game-theoretical approach can yield cross-layer security strategy solutions to the cyber-physical systems.

  10. A DATABASE DESIGN OF MAJOR PAST FLOOD EVENTS IN ROMANIA FROM NATIONAL AND INTERNATIONAL INVENTORIES

    Directory of Open Access Journals (Sweden)

    CHENDEŞ V.

    2015-03-01

    Full Text Available Floods are one of the most significant natural hazards in Romania, causing losses of human lives and important damages to buildings and infrastructure. Romania is recognized among the most flood prone European countries. This work was conducted in the framework of the VULMIN project, aiming to extract the available key indicators of major and historical flood events in Romania, as a basis for better understanding the patterns of socio-economic vulnerability to floods at regional and national scales and of the adaptive capacity of living areas along the main rivers of this country. The existing databases on flood records at global (e.g. EM-DAT International Disaster Database, Dartmouth Flood Observatory, GLIDE database and national level (the preliminary flood risk assessment conducted within the framework of the EU Flood Directive, research projects (e.g. Hydrate, Danube Flood Risk and the available literature have been explored to collect indicators of intensity, magnitude, extent and impacts associated to past major flood events recorded in Romania. Starting from the scientific and reporting needs, taking into account the reliable information found in the documented databases, the main attributes of floods and flash-floods events has been embedded into a proposed database to be developed in the project, which may be useful for further analyses related to hydrological changes associated to climate change.

  11. Frequency converter design and manufacturing considerations for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Hibbard, R.L.; English, R.E., Jr.; De Yoreo, J.J.; Montesanti, R.C.

    1998-03-25

    The National Ignition Facility (NIF), being constructed at Lawrence Livermore National Laboratory (LLNL), comprises 192 laser beams, Figure 1. The lasing medium is neodymium in phosphate glass with a fundamental frequency (1{omega}) of 1.053 {micro}m. Sum frequency generation in a pair of conversion crystals (KDP/KD*P) produces 1.8 Mj of the third harmonic light (3{omega} or {lambda}=0.35). On NIF the frequency conversion crystals are part of the Final Optics Assembly (FOA), whose two principal functions are to convert the laser light to 3{omega} and focus it on target. In addition, the FOA provides a vacuum window to the target chamber, smoothes the on- target irradiance profile, moves the unconverted light away from the target, and provides signals for alignment and diagnostics. The FOA has four Integrated Optics Modules (IOM), Figure 4, each of which contains two 41 cm square crystals are mounted with the full edge support to micro radian angular and micron flatness tolerances. This paper is intended to be an overview of the important factors that affect frequency conversion on NIF. Chief among these are angular errors arising from crystal growth, finishing, and mounting. The general nature of these errors and how they affect frequency conversion, and finally the importance of a frequency conversion metrology tool in assessing converter performance before opto-mechanical assemblies are installed on NIF will be discussed.

  12. Technical Design Report for the FACET-II Project at SLAC National Accelerator Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-08-26

    The discovery of the Higgs boson, a subatomic particle whose field is responsible for endowing all other particles with mass, is one of the major discoveries of the last decade. To unlock the mysteries of the subatomic world, physicists use the worlds’ most powerful microscopes – particle accelerators. The resolving power of these microscopes is proportional to the energy of the beams they produce. Since their inception nearly 80 years ago, the energy reach of accelerators has grown exponentially due to continued breakthroughs in accelerator physics and engineering. The highest energy beams in the world are currently at the 27km circumference Large Hadron Collider (LHC) in Europe. Although it is a monument to human engineering, scientists are approaching a practical limit to the size and cost of such collider facilities. Innovation is essential for continued progress. Electrons can “surf” on waves of plasma – a hot gas of charged particles – gaining very high energies in very short distances. This approach, called plasma wakefield acceleration, has the potential to dramatically shrink the size and cost of particle accelerators. Research at the SLAC National Accelerator Laboratory has demonstrated that plasmas can provide 1,000 times the acceleration in a given distance compared with current technologies. Developing revolutionary and more efficient acceleration techniques that allow for an affordable high-energy collider has been the focus of FACET, a National User Facility at SLAC.

  13. Time as a dimension of the sample design in national-scale forest inventories

    Science.gov (United States)

    Francis Roesch; Paul Van Deusen

    2013-01-01

    Historically, the goal of forest inventories has been to determine the extent of the timber resource. Predictions of how the resource was changing were made by comparing differences between successive inventories. The general view of the associated sample design was with selection probabilities based on land area observed at a discrete point in time. Time was not...

  14. National design environment for pulp mills; Kansallinen paperitehtaan suunnitteluympaeristoe - PMST 03

    Energy Technology Data Exchange (ETDEWEB)

    Kaijaluoto, S. [VTT Energy, Jyvaeskylae (Finland)

    1998-12-31

    The research to be done in the CACTUS research programme produces new process models and generates new knowledge about the influence of various contaminants on the runnability and the quality of paper. The generated information calls for an environment where it can be analysed and utilised. The goal of the project is to build a design environment for papermaking processes. The environment will be composed of a number of tools, all integrated together, that can be used in process design from preliminary concept screening through detailed simulation studies to the design and tuning of control systems. The design environment is based on the Balas and APMS simulation programmes developed at VTT. Balas is a general steady-state simulation package for chemical processes with emphasis on pulp and paper. Recent applications include the analysis of the influence of new drying techniques on the energy and water management of a paper mill and the evaluation of new paper machine and water treatment concepts. APMS (Advanced Pulp and Paper Mill Simulator) is a new flexible tool intended for fast modelling and efficient simulation of the dynamic performance the various unit processes in pulp and paper mill, or even of the whole integrated mill. (orig.)

  15. National Ignition Facility subsystem design requirements target diagnostics subsystem SSDR 1.8.3

    Energy Technology Data Exchange (ETDEWEB)

    Lee, D.

    1996-10-28

    This SSDR establishes the performance, design, development and test requirements for the Target Experimental System`s Diagnostic, WBS 1.8. 3. This includes the individual diagnostic components, the Target Diagnostic Data Acquisition System (Target DAS), the diagnostic vacuum system, the timing/fiducial system, and the EMI protection system.

  16. 78 FR 55743 - Notice of Service Delivery Area Designation for the Shinnecock Indian Nation

    Science.gov (United States)

    2013-09-11

    ..., OR. Coushatta Tribe of Louisiana Allen Parish, LA, Elton, LA.\\13\\ Cow Creek Band of Umpqua Indians of...\\ Cow Creek Band of Umpqua Indians of Oregon recognized by Public Law 97-391, signed into law on... HUMAN SERVICES Indian Health Service Notice of Service Delivery Area Designation for the Shinnecock...

  17. Assessing the healthcare landscape within developing nations: impact on design reality gaps

    CSIR Research Space (South Africa)

    Ouma, S

    2010-09-01

    Full Text Available technology based as a result of design reality gaps. We therefore use landscape methodology and case studies to illustrate how documentation can be extracted and used before developing the projects to understand the context of the project domain and as a...

  18. 78 FR 60347 - Self-Regulatory Organizations; National Securities Clearing Corporation; Notice of Designation of...

    Science.gov (United States)

    2013-10-01

    ... Proposed Rule Change, as Modified by Amendment Nos. 1 and 2, To Institute Supplemental Liquidity Deposits to Its Clearing Funding Designed To Increase Liquidity Resources To Meet Its Liquidity Needs... supplemental liquidity deposits to its Clearing Fund in order to increase liquidity resources to meet...

  19. Hierarchically structured, nitrogen-doped carbon membranes

    KAUST Repository

    Wang, Hong

    2017-08-03

    The present invention is a structure, method of making and method of use for a novel macroscopic hierarchically structured, nitrogen-doped, nano-porous carbon membrane (HNDCMs) with asymmetric and hierarchical pore architecture that can be produced on a large-scale approach. The unique HNDCM holds great promise as components in separation and advanced carbon devices because they could offer unconventional fluidic transport phenomena on the nanoscale. Overall, the invention set forth herein covers a hierarchically structured, nitrogen-doped carbon membranes and methods of making and using such a membranes.

  20. A Model for Slicing JAVA Programs Hierarchically

    Institute of Scientific and Technical Information of China (English)

    Bi-Xin Li; Xiao-Cong Fan; Jun Pang; Jian-Jun Zhao

    2004-01-01

    Program slicing can be effectively used to debug, test, analyze, understand and maintain objectoriented software. In this paper, a new slicing model is proposed to slice Java programs based on their inherent hierarchical feature. The main idea of hierarchical slicing is to slice programs in a stepwise way, from package level, to class level, method level, and finally up to statement level. The stepwise slicing algorithm and the related graph reachability algorithms are presented, the architecture of the Java program Analyzing Tool (JATO) based on hierarchical slicing model is provided, the applications and a small case study are also discussed.

  1. Hierarchical analysis of acceptable use policies

    Directory of Open Access Journals (Sweden)

    P. A. Laughton

    2008-01-01

    Full Text Available Acceptable use policies (AUPs are vital tools for organizations to protect themselves and their employees from misuse of computer facilities provided. A well structured, thorough AUP is essential for any organization. It is impossible for an effective AUP to deal with every clause and remain readable. For this reason, some sections of an AUP carry more weight than others, denoting importance. The methodology used to develop the hierarchical analysis is a literature review, where various sources were consulted. This hierarchical approach to AUP analysis attempts to highlight important sections and clauses dealt with in an AUP. The emphasis of the hierarchal analysis is to prioritize the objectives of an AUP.

  2. Hierarchical modeling and analysis for spatial data

    CERN Document Server

    Banerjee, Sudipto; Gelfand, Alan E

    2003-01-01

    Among the many uses of hierarchical modeling, their application to the statistical analysis of spatial and spatio-temporal data from areas such as epidemiology And environmental science has proven particularly fruitful. Yet to date, the few books that address the subject have been either too narrowly focused on specific aspects of spatial analysis, or written at a level often inaccessible to those lacking a strong background in mathematical statistics.Hierarchical Modeling and Analysis for Spatial Data is the first accessible, self-contained treatment of hierarchical methods, modeling, and dat

  3. SafeZone: A Hierarchical Inter-Domain Authenticated Source Address Validation Solution

    CERN Document Server

    Li, Jie; Xu, Ke

    2011-01-01

    Next generation Internet is highly concerned about the issue of reliability. Principally, the foundation of reliability is authentication of the source IP address. With the signature-and-verification based defense mechanisms available today, unfortunately, there is a lack of hierarchical architecture, which makes the structure of the trust alliance excessively flat and single. Moreover, with the increasing scale of the trust alliance, costs of validation grow so quickly that they do not adapt to incremental deployment. Via comparison with traditional solutions, this article proposes a hierarchical, inter-domain authenticated source address validation solution named SafeZone. SafeZone employs two intelligent designs, lightweight tag replacement and a hierarchical partitioning scheme, each of which helps to ensure that SafeZone can construct trustworthy and hierarchical trust alliances without the negative influences and complex operations on de facto networks. Extensive experiments also indicate that SafeZone ...

  4. Self-Sensing of Damage Progression in Unidirectional Multiscale Hierarchical Composites Subjected to Cyclic Tensile Loading

    Science.gov (United States)

    Ku-Herrera, J. J.; Pacheco-Salazar, O. F.; Ríos-Soberanis, C. R.; Domínguez-Rodríguez, G.; Avilés, F.

    2016-01-01

    The electrical sensitivity of glass fiber/multiwall carbon nanotube/vinyl ester hierarchical composites containing a tailored electrically-percolated network to self-sense accumulation of structural damage when subjected to cyclic tensile loading-unloading is investigated. The hierarchical composites were designed to contain two architectures differentiated by the location of the multiwall carbon nanotubes (MWCNTs), viz. MWCNTs deposited on the fibers and MWCNTs dispersed within the matrix. The changes in electrical resistance of the hierarchical composites are associated to their structural damage and correlated to acoustic emissions. The results show that such tailored hierarchical composites are able to self-sense damage onset and accumulation upon tensile loading-unloading cycles by means of their electrical response, and that the electrical response depends on the MWCNT location. PMID:26999158

  5. [Design and Implementation of the Data Collection Tools for National Mental Health Survey of Colombia, 2015].

    Science.gov (United States)

    Rodriguez, Viviana; Moreno, Socorro; Camacho, Jhon; Gómez-Restrepo, Carlos; de Santacruz, Cecilia; Rodriguez, Maria Nelcy; Tamayo Martínez, Nathalie

    2016-12-01

    Population surveys on mental health are performed as part of the inputs required for the creation, implementation and evaluation of policies related to mental health, worldwide, and as an initiative of the World Health Organisation (WHO). was held The fourth National Survey of Mental Health (ENSM 2015) was carried out during the first half of 2015 on a representative sample of 2,727 children between 7 and 11 years of age, 1,754 adolescents, and 10, 870 adults who were selected throughout the country. To describe the selection and definition of the tools used to measure mental health (including social cognition and violence), problems, mental disorders, and the evaluation of health states, as well as to describe the process used to develop the data collection tools finally used. The measurement of mental disorders in children was performed using the Diagnostic Interview Schedule for Children (DISC), and the Composite International Diagnostic Interview (CIDI) was used for adolescents and adults. For the remaining components evaluated in the survey, a search was conducted on the tools used at a national and international level. The selection of the toos used for the evaluation was based on the questions made by each tool, as well as the scientific validity that could be obtained from the results. In some cases the complete tool (as published) was used, in other cases the tools were constructed unifying parts of different ones, or questions were written based on the concepts or characteristics to be measured. Subsequently, a validation of content, concept and semantic of every tool was carried out, including the CIDI and DISC. The resulting tools were used on a group of people with different characteristics. It was noted that further clarification was necessary for some people to fully understand what was being asked. Because the collection of all the information in the survey would be computer assisted, a stream format was generated to guide the implementation in

  6. Image meshing via hierarchical optimization

    Institute of Scientific and Technical Information of China (English)

    Hao XIE; Ruo-feng TONG‡

    2016-01-01

    Vector graphic, as a kind of geometric representation of raster images, has many advantages, e.g., defi nition independence and editing facility. A popular way to convert raster images into vector graphics is image meshing, the aim of which is to fi nd a mesh to represent an image as faithfully as possible. For traditional meshing algorithms, the crux of the problem resides mainly in the high non-linearity and non-smoothness of the objective, which makes it difficult to fi nd a desirable optimal solution. To ameliorate this situation, we present a hierarchical optimization algorithm solving the problem from coarser levels to fi ner ones, providing initialization for each level with its coarser ascent. To further simplify the problem, the original non-convex problem is converted to a linear least squares one, and thus becomes convex, which makes the problem much easier to solve. A dictionary learning framework is used to combine geometry and topology elegantly. Then an alternating scheme is employed to solve both parts. Experiments show that our algorithm runs fast and achieves better results than existing ones for most images.

  7. Image meshing via hierarchical optimization*

    Institute of Scientific and Technical Information of China (English)

    Hao XIE; Ruo-feng TONGS

    2016-01-01

    Vector graphic, as a kind of geometric representation of raster images, has many advantages, e.g., definition independence and editing facility. A popular way to convert raster images into vector graphics is image meshing, the aim of which is to find a mesh to represent an image as faithfully as possible. For traditional meshing algorithms, the crux of the problem resides mainly in the high non-linearity and non-smoothness of the objective, which makes it difficult to find a desirable optimal solution. To ameliorate this situation, we present a hierarchical optimization algorithm solving the problem from coarser levels to finer ones, providing initialization for each level with its coarser ascent. To further simplify the problem, the original non-convex problem is converted to a linear least squares one, and thus becomes convex, which makes the problem much easier to solve. A dictionary learning framework is used to combine geometry and topology elegantly. Then an alternating scheme is employed to solve both parts. Experiments show that our algorithm runs fast and achieves better results than existing ones for most images.

  8. Hierarchical Bayes Ensemble Kalman Filtering

    CERN Document Server

    Tsyrulnikov, Michael

    2015-01-01

    Ensemble Kalman filtering (EnKF), when applied to high-dimensional systems, suffers from an inevitably small affordable ensemble size, which results in poor estimates of the background error covariance matrix ${\\bf B}$. The common remedy is a kind of regularization, usually an ad-hoc spatial covariance localization (tapering) combined with artificial covariance inflation. Instead of using an ad-hoc regularization, we adopt the idea by Myrseth and Omre (2010) and explicitly admit that the ${\\bf B}$ matrix is unknown and random and estimate it along with the state (${\\bf x}$) in an optimal hierarchical Bayes analysis scheme. We separate forecast errors into predictability errors (i.e. forecast errors due to uncertainties in the initial data) and model errors (forecast errors due to imperfections in the forecast model) and include the two respective components ${\\bf P}$ and ${\\bf Q}$ of the ${\\bf B}$ matrix into the extended control vector $({\\bf x},{\\bf P},{\\bf Q})$. Similarly, we break the traditional backgrou...

  9. Packaging design for Lawrence Berkeley National Laboratory high-resistivity CCDs

    Science.gov (United States)

    Stover, Richard J.; Brown, William E.; Robinson, Lloyd B.; Gilmore, D. K.; Wei, Mingzhi; Lockwood, Christopher

    2004-09-01

    The Lawrence Berkeley National Laboratory has been developing fully-depleted high resistivity CCDs. These CCDs exhibit very high red quantum efficiency, no red fringing, and very low lateral charge diffusion, making them good candidates for astronomical applications that require better red response or better point spread function than can typically be achieved with standard thinned CCDs. For the LBNL 2Kx4K CCD we have developed a four-side mosaic package fabricated from aluminum nitride. Our objectives have been to achieve a flatness of less than 10 micrometers peak-to-valley and a consistent final package thickness variation of 10 micrometers or less in a light-weight package. We have achieved the flatness objective, and we are working toward the thickness variation objective.

  10. Standard design for National Ignition Facility x-ray streak and framing cameras

    Energy Technology Data Exchange (ETDEWEB)

    Kimbrough, J. R.; Bell, P. M.; Bradley, D. K.; Holder, J. P.; Kalantar, D. K.; MacPhee, A. G.; Telford, S.

    2010-10-01

    The x-ray streak camera and x-ray framing camera for the National Ignition Facility were redesigned to improve electromagnetic pulse hardening, protect high voltage circuits from pressure transients, and maximize the use of common parts and operational software. Both instruments use the same PC104 based controller, interface, power supply, charge coupled device camera, protective hermetically sealed housing, and mechanical interfaces. Communication is over fiber optics with identical facility hardware for both instruments. Each has three triggers that can be either fiber optic or coax. High voltage protection consists of a vacuum sensor to enable the high voltage and pulsed microchannel plate phosphor voltage. In the streak camera, the high voltage is removed after the sweep. Both rely on the hardened aluminum box and a custom power supply to reduce electromagnetic pulse/electromagnetic interference (EMP/EMI) getting into the electronics. In addition, the streak camera has an EMP/EMI shield enclosing the front of the streak tube.

  11. Importance of information system design improvisation in meeting the needs of an emerging democracy in South Africa, a case study of a national waste information system

    CSIR Research Space (South Africa)

    Godfrey, Linda K

    2006-09-01

    Full Text Available Designing a successful national waste information system (WIS) for an emerging democracy in South Africa requires that the system be relevant, efficient, effective and above all sustainable. To do this, the needs of government and stakeholders...

  12. The principle and main structure design on national database of poverty, environment, and development in China

    Science.gov (United States)

    Wang, Yingjie; Feng, Xiangfeng; Yu, Zhuoyuan; Cui, Jing

    2009-07-01

    Poverty is listed as the one of eight "Millennium Development Goals" by UN Summit. From 1978 to 2004, rural poverty population in China is cut to 26.1 million from 250 million. In order to support the decision maker to make nice planning in elimination of poverty and promotion of regional sustainable development in China, the GIS based systemic and comprehensive database for poverty, environment and development is proposed and designed in the paper. Additionally, the design principle and main content of the database is discussed by utilization modern technology, such as spatialtemporal and tree-ring data models for data structuring and coding, in order to represent current poverty status, spatial distribution and temporal variations, and to explore the relationship among poverty, environment and development ultimately.

  13. A National Baseline Prevalence Survey of Schistosomiasis in the Philippines Using Stratified Two-Step Systematic Cluster Sampling Design

    Directory of Open Access Journals (Sweden)

    Lydia Leonardo

    2012-01-01

    Full Text Available For the first time in the country, a national baseline prevalence survey using a well-defined sampling design such as a stratified two-step systematic cluster sampling was conducted in 2005 to 2008. The purpose of the survey was to stratify the provinces according to prevalence of schistosomiasis such as high, moderate, and low prevalence which in turn would be used as basis for the intervention program to be implemented. The national survey was divided into four phases. Results of the first two phases conducted in Mindanao and the Visayas were published in 2008. Data from the last two phases showed three provinces with prevalence rates higher than endemic provinces surveyed in the first two phases thus changing the overall ranking of endemic provinces at the national level. Age and sex distribution of schistosomiasis remained the same in Luzon and Maguindanao. Soil-transmitted and food-borne helminthes were also recorded in these surveys. This paper deals with the results of the last 2 phases done in Luzon and Maguindanao and integrates all four phases in the discussion.

  14. A national baseline prevalence survey of schistosomiasis in the Philippines using stratified two-step systematic cluster sampling design.

    Science.gov (United States)

    Leonardo, Lydia; Rivera, Pilarita; Saniel, Ofelia; Villacorte, Elena; Lebanan, May Antonnette; Crisostomo, Bobby; Hernandez, Leda; Baquilod, Mario; Erce, Edgardo; Martinez, Ruth; Velayudhan, Raman

    2012-01-01

    For the first time in the country, a national baseline prevalence survey using a well-defined sampling design such as a stratified two-step systematic cluster sampling was conducted in 2005 to 2008. The purpose of the survey was to stratify the provinces according to prevalence of schistosomiasis such as high, moderate, and low prevalence which in turn would be used as basis for the intervention program to be implemented. The national survey was divided into four phases. Results of the first two phases conducted in Mindanao and the Visayas were published in 2008. Data from the last two phases showed three provinces with prevalence rates higher than endemic provinces surveyed in the first two phases thus changing the overall ranking of endemic provinces at the national level. Age and sex distribution of schistosomiasis remained the same in Luzon and Maguindanao. Soil-transmitted and food-borne helminthes were also recorded in these surveys. This paper deals with the results of the last 2 phases done in Luzon and Maguindanao and integrates all four phases in the discussion.

  15. Vegetation study in support of the design and optimization of vegetative soil covers, Sandia National Laboratories, Albuquerque, New Mexico.

    Energy Technology Data Exchange (ETDEWEB)

    Peace, Gerald (Jerry) L.; Goering, Timothy James (GRAM inc., Albuquerque, NM); Knight, Paul J. (Marron and Associates, Albuquerque, NM); Ashton, Thomas S. (Marron and Associates, Albuquerque, NM)

    2004-11-01

    A vegetation study was conducted in Technical Area 3 at Sandia National Laboratories, Albuquerque, New Mexico in 2003 to assist in the design and optimization of vegetative soil covers for hazardous, radioactive, and mixed waste landfills at Sandia National Laboratories/New Mexico and Kirtland Air Force Base. The objective of the study was to obtain site-specific, vegetative input parameters for the one-dimensional code UNSAT-H and to identify suitable, diverse native plant species for use on vegetative soil covers that will persist indefinitely as a climax ecological community with little or no maintenance. The identification and selection of appropriate native plant species is critical to the proper design and long-term performance of vegetative soil covers. Major emphasis was placed on the acquisition of representative, site-specific vegetation data. Vegetative input parameters measured in the field during this study include root depth, root length density, and percent bare area. Site-specific leaf area index was not obtained in the area because there was no suitable platform to measure leaf area during the 2003 growing season due to severe drought that has persisted in New Mexico since 1999. Regional LAI data was obtained from two unique desert biomes in New Mexico, Sevilletta Wildlife Refuge and Jornada Research Station.

  16. Optimal design of irradiance redistribution guides for the National Renewable Energy Laboratory's high-flux solar furnace

    Science.gov (United States)

    Bortz, John C.; Shatz, Narkis E.; Lewandowski, Allan

    1995-08-01

    The National Renewable Energy Laboratory (NREL) has developed and operates the high-flux solar furnace (HFSF), a 10-kW solar concentrator used for research in solar energy applications. An application of ongoing interest is the heat-bonding of metallic foils to ceramic substrates, a process requiring a highly uniform irradiance distribution over a 10 by 10-cm target area, as well as a mean irradiance of at least 10 W/cm2, and a working distance of at least 10-cm from the optics. Science Applications International Corporation (SAIC) and NREL have developed designs for two reflective irradiance redistribtuion guides (IRGs) for use in conjunction with the HFSF, which provide significantly enhanced irradiance uniformity while exceeding the mean-irradiance and working-distance requirements. Irradiance- uniformity levels of 7.2% and 3.1% root-mean-square (RMS) deviation over the target area were achieved by the two IRG designs. The designs were generated using SAICs nonimaging concentrator synthesis code, which employs a global optimization procedure. The HFSF was modeled by means of an optical ray set produced by NREL's solar furnace code. The IRG designs are novel in that they feature re-entrant optics combined with the intentional use of ray paths having different nubmers of multiple reflections within a single reflective optical component in order to achieve the desired irradiance distribution.

  17. An Automatic Hierarchical Delay Analysis Tool

    Institute of Scientific and Technical Information of China (English)

    FaridMheir-El-Saadi; BozenaKaminska

    1994-01-01

    The performance analysis of VLSI integrated circuits(ICs) with flat tools is slow and even sometimes impossible to complete.Some hierarchical tools have been developed to speed up the analysis of these large ICs.However,these hierarchical tools suffer from a poor interaction with the CAD database and poorly automatized operations.We introduce a general hierarchical framework for performance analysis to solve these problems.The circuit analysis is automatic under the proposed framework.Information that has been automatically abstracted in the hierarchy is kept in database properties along with the topological information.A limited software implementation of the framework,PREDICT,has also been developed to analyze the delay performance.Experimental results show that hierarchical analysis CPU time and memory requirements are low if heuristics are used during the abstraction process.

  18. Packaging glass with hierarchically nanostructured surface

    KAUST Repository

    He, Jr-Hau

    2017-08-03

    An optical device includes an active region and packaging glass located on top of the active region. A top surface of the packaging glass includes hierarchical nanostructures comprised of honeycombed nanowalls (HNWs) and nanorod (NR) structures extending from the HNWs.

  19. Generation of hierarchically correlated multivariate symbolic sequences

    CERN Document Server

    Tumminello, Mi; Mantegna, R N

    2008-01-01

    We introduce an algorithm to generate multivariate series of symbols from a finite alphabet with a given hierarchical structure of similarities. The target hierarchical structure of similarities is arbitrary, for instance the one obtained by some hierarchical clustering procedure as applied to an empirical matrix of Hamming distances. The algorithm can be interpreted as the finite alphabet equivalent of the recently introduced hierarchically nested factor model (M. Tumminello et al. EPL 78 (3) 30006 (2007)). The algorithm is based on a generating mechanism that is different from the one used in the mutation rate approach. We apply the proposed methodology for investigating the relationship between the bootstrap value associated with a node of a phylogeny and the probability of finding that node in the true phylogeny.

  20. Hierarchical modularity in human brain functional networks

    CERN Document Server

    Meunier, D; Fornito, A; Ersche, K D; Bullmore, E T; 10.3389/neuro.11.037.2009

    2010-01-01

    The idea that complex systems have a hierarchical modular organization originates in the early 1960s and has recently attracted fresh support from quantitative studies of large scale, real-life networks. Here we investigate the hierarchical modular (or "modules-within-modules") decomposition of human brain functional networks, measured using functional magnetic resonance imaging (fMRI) in 18 healthy volunteers under no-task or resting conditions. We used a customized template to extract networks with more than 1800 regional nodes, and we applied a fast algorithm to identify nested modular structure at several hierarchical levels. We used mutual information, 0 < I < 1, to estimate the similarity of community structure of networks in different subjects, and to identify the individual network that is most representative of the group. Results show that human brain functional networks have a hierarchical modular organization with a fair degree of similarity between subjects, I=0.63. The largest 5 modules at ...

  1. HIERARCHICAL ORGANIZATION OF INFORMATION, IN RELATIONAL DATABASES

    Directory of Open Access Journals (Sweden)

    Demian Horia

    2008-05-01

    Full Text Available In this paper I will present different types of representation, of hierarchical information inside a relational database. I also will compare them to find the best organization for specific scenarios.

  2. When to Use Hierarchical Linear Modeling

    National Research Council Canada - National Science Library

    Veronika Huta

    2014-01-01

    Previous publications on hierarchical linear modeling (HLM) have provided guidance on how to perform the analysis, yet there is relatively little information on two questions that arise even before analysis...

  3. An introduction to hierarchical linear modeling

    National Research Council Canada - National Science Library

    Woltman, Heather; Feldstain, Andrea; MacKay, J. Christine; Rocchi, Meredith

    2012-01-01

    This tutorial aims to introduce Hierarchical Linear Modeling (HLM). A simple explanation of HLM is provided that describes when to use this statistical technique and identifies key factors to consider before conducting this analysis...

  4. Conservation Laws in the Hierarchical Model

    NARCIS (Netherlands)

    Beijeren, H. van; Gallavotti, G.; Knops, H.

    1974-01-01

    An exposition of the renormalization-group equations for the hierarchical model is given. Attention is drawn to some properties of the spin distribution functions which are conserved under the action of the renormalization group.

  5. Hierarchical organization versus self-organization

    OpenAIRE

    Busseniers, Evo

    2014-01-01

    In this paper we try to define the difference between hierarchical organization and self-organization. Organization is defined as a structure with a function. So we can define the difference between hierarchical organization and self-organization both on the structure as on the function. In the next two chapters these two definitions are given. For the structure we will use some existing definitions in graph theory, for the function we will use existing theory on (self-)organization. In the t...

  6. Hierarchical decision making for flood risk reduction

    DEFF Research Database (Denmark)

    Custer, Rocco; Nishijima, Kazuyoshi

    2013-01-01

    . In current practice, structures are often optimized individually without considering benefits of having a hierarchy of protection structures. It is here argued, that the joint consideration of hierarchically integrated protection structures is beneficial. A hierarchical decision model is utilized to analyze...... and compare the benefit of large upstream protection structures and local downstream protection structures in regard to epistemic uncertainty parameters. Results suggest that epistemic uncertainty influences the outcome of the decision model and that, depending on the magnitude of epistemic uncertainty...

  7. Hierarchical self-organization of tectonic plates

    OpenAIRE

    2010-01-01

    The Earth's surface is subdivided into eight large tectonic plates and many smaller ones. We reconstruct the plate tessellation history and demonstrate that both large and small plates display two distinct hierarchical patterns, described by different power-law size-relationships. While small plates display little organisational change through time, the structure of the large plates oscillate between minimum and maximum hierarchical tessellations. The organization of large plates rapidly chan...

  8. Angelic Hierarchical Planning: Optimal and Online Algorithms

    Science.gov (United States)

    2008-12-06

    restrict our attention to plans in I∗(Act, s0). Definition 2. ( Parr and Russell , 1998) A plan ah∗ is hierarchically optimal iff ah∗ = argmina∈I∗(Act,s0):T...Murdock, Dan Wu, and Fusun Yaman. SHOP2: An HTN planning system. JAIR, 20:379–404, 2003. Ronald Parr and Stuart Russell . Reinforcement Learning with...Angelic Hierarchical Planning: Optimal and Online Algorithms Bhaskara Marthi Stuart J. Russell Jason Wolfe Electrical Engineering and Computer

  9. Hierarchical Needs, Income Comparisons and Happiness Levels

    OpenAIRE

    Drakopoulos, Stavros

    2011-01-01

    The cornerstone of the hierarchical approach is that there are some basic human needs which must be satisfied before non-basic needs come into the picture. The hierarchical structure of needs implies that the satisfaction of primary needs provides substantial increases to individual happiness compared to the subsequent satisfaction of secondary needs. This idea can be combined with the concept of comparison income which means that individuals compare rewards with individuals with similar char...

  10. The Effect of National and International Culture on Logo Design of Iran’s Graphic Art

    OpenAIRE

    2015-01-01

    Art is an intellectual accumulation, which is unique to the society where it exists, and it is shaped by that land’s culture. In the other words, art is not an element, which can be taken from other cultures directly and applied to a society. On the other hand, communication instruments play a significant role in transferring the cultural and artistic heritage, which are the basis of a country. Furthermore, graphic design is a language which conveys a message, it is an identification of the c...

  11. Modeling place field activity with hierarchical slow feature analysis

    Directory of Open Access Journals (Sweden)

    Fabian eSchoenfeld

    2015-05-01

    Full Text Available In this paper we present six experimental studies from the literature on hippocampal place cells and replicate their main results in a computational framework based on the principle of slowness. Each of the chosen studies first allows rodents to develop stable place field activity and then examines a distinct property of the established spatial encoding, namely adaptation to cue relocation and removal; directional firing activity in the linear track and open field; and results of morphing and stretching the overall environment. To replicate these studies we employ a hierarchical Slow Feature Analysis (SFA network. SFA is an unsupervised learning algorithm extracting slowly varying information from a given stream of data, and hierarchical application of SFA allows for high dimensional input such as visual images to be processed efficiently and in a biologically plausible fashion. Training data for the network is produced in ratlab, a free basic graphics engine designed to quickly set up a wide range of 3D environments mimicking real life experimental studies, simulate a foraging rodent while recording its visual input, and training & sampling a hierarchical SFA network.

  12. How Hierarchical Topics Evolve in Large Text Corpora.

    Science.gov (United States)

    Cui, Weiwei; Liu, Shixia; Wu, Zhuofeng; Wei, Hao

    2014-12-01

    Using a sequence of topic trees to organize documents is a popular way to represent hierarchical and evolving topics in text corpora. However, following evolving topics in the context of topic trees remains difficult for users. To address this issue, we present an interactive visual text analysis approach to allow users to progressively explore and analyze the complex evolutionary patterns of hierarchical topics. The key idea behind our approach is to exploit a tree cut to approximate each tree and allow users to interactively modify the tree cuts based on their interests. In particular, we propose an incremental evolutionary tree cut algorithm with the goal of balancing 1) the fitness of each tree cut and the smoothness between adjacent tree cuts; 2) the historical and new information related to user interests. A time-based visualization is designed to illustrate the evolving topics over time. To preserve the mental map, we develop a stable layout algorithm. As a result, our approach can quickly guide users to progressively gain profound insights into evolving hierarchical topics. We evaluate the effectiveness of the proposed method on Amazon's Mechanical Turk and real-world news data. The results show that users are able to successfully analyze evolving topics in text data.

  13. Final Report of Optimization Algorithms for Hierarchical Problems, with Applications to Nanoporous Materials

    Energy Technology Data Exchange (ETDEWEB)

    Nash, Stephen G.

    2013-11-11

    The research focuses on the modeling and optimization of nanoporous materials. In systems with hierarchical structure that we consider, the physics changes as the scale of the problem is reduced and it can be important to account for physics at the fine level to obtain accurate approximations at coarser levels. For example, nanoporous materials hold promise for energy production and storage. A significant issue is the fabrication of channels within these materials to allow rapid diffusion through the material. One goal of our research is to apply optimization methods to the design of nanoporous materials. Such problems are large and challenging, with hierarchical structure that we believe can be exploited, and with a large range of important scales, down to atomistic. This requires research on large-scale optimization for systems that exhibit different physics at different scales, and the development of algorithms applicable to designing nanoporous materials for many important applications in energy production, storage, distribution, and use. Our research has two major research thrusts. The first is hierarchical modeling. We plan to develop and study hierarchical optimization models for nanoporous materials. The models have hierarchical structure, and attempt to balance the conflicting aims of model fidelity and computational tractability. In addition, we analyze the general hierarchical model, as well as the specific application models, to determine their properties, particularly those properties that are relevant to the hierarchical optimization algorithms. The second thrust was to develop, analyze, and implement a class of hierarchical optimization algorithms, and apply them to the hierarchical models we have developed. We adapted and extended the optimization-based multigrid algorithms of Lewis and Nash to the optimization models exemplified by the hierarchical optimization model. This class of multigrid algorithms has been shown to be a powerful tool for

  14. Hierarchical Nanoceramics for Industrial Process Sensors

    Energy Technology Data Exchange (ETDEWEB)

    Ruud, James, A.; Brosnan, Kristen, H.; Striker, Todd; Ramaswamy, Vidya; Aceto, Steven, C.; Gao, Yan; Willson, Patrick, D.; Manoharan, Mohan; Armstrong, Eric, N., Wachsman, Eric, D.; Kao, Chi-Chang

    2011-07-15

    This project developed a robust, tunable, hierarchical nanoceramics materials platform for industrial process sensors in harsh-environments. Control of material structure at multiple length scales from nano to macro increased the sensing response of the materials to combustion gases. These materials operated at relatively high temperatures, enabling detection close to the source of combustion. It is anticipated that these materials can form the basis for a new class of sensors enabling widespread use of efficient combustion processes with closed loop feedback control in the energy-intensive industries. The first phase of the project focused on materials selection and process development, leading to hierarchical nanoceramics that were evaluated for sensing performance. The second phase focused on optimizing the materials processes and microstructures, followed by validation of performance of a prototype sensor in a laboratory combustion environment. The objectives of this project were achieved by: (1) synthesizing and optimizing hierarchical nanostructures; (2) synthesizing and optimizing sensing nanomaterials; (3) integrating sensing functionality into hierarchical nanostructures; (4) demonstrating material performance in a sensing element; and (5) validating material performance in a simulated service environment. The project developed hierarchical nanoceramic electrodes for mixed potential zirconia gas sensors with increased surface area and demonstrated tailored electrocatalytic activity operable at high temperatures enabling detection of products of combustion such as NOx close to the source of combustion. Methods were developed for synthesis of hierarchical nanostructures with high, stable surface area, integrated catalytic functionality within the structures for gas sensing, and demonstrated materials performance in harsh lab and combustion gas environments.

  15. Designing a national plan for improving sexual health in Iran: An experience of an Islamic country

    Science.gov (United States)

    Damari, Behzad; Tabrizchi, Narges; Riazi-Isfahani, Sahand

    2016-01-01

    Background: Prevalence of sexual dysfunction varies from 20% to 40% in men and women in different studies in Iran. Despite its high prevalence, it seems that this issue has been neglected, particularly in Islamic countries. The aim of this study was to assess sexual health in Iran. This was a mixed method study. Methods: Data were collected through evaluating country’s sexual health programs and literature review. Sexual health status was drafted and formed following a sound analysis by stakeholders. After conducting interviews and focus group discussions, the main points of the meetings, influencing factors of the present status and oncoming strategies were obtained upon experts’ opinions. Results: Review of general policies and the literature showed that although there is adequate support for improving sexual health status in the country, sexual health status has been decreased in the last decade. Based on Iranian sexual health indicators and experts’ opinions, the focus points could be divided into the following groups: Structural and functional –political, legal-behavior, and cultural. Conclusion: Breaking the taboo of sexual health issues would require attention from the policy makers especially in Islamic nations to facilitate the steps on the road to sexual health. In this regard, clarified vision, strategic goals and interventional policies are proposed. An inter-sectional cooperation is needed to implement interventions to promote sexual health status. PMID:27683648

  16. The moral imperative of designating patient safety and quality care as a national nursing research priority.

    Science.gov (United States)

    Johnstone, Megan-Jane; Kanitsaki, Olga

    2006-01-01

    Since the early 1990s, research studies conducted respectively in the USA, UK and Australia have found that between 4 and 16.6 per cent of patients suffer from some kind of harm (including permanent disability and death) as a result of human errors and adverse events while in hospital. It has been further estimated that approximately 50 per cent of these human errors/adverse events resulting in harm could have been prevented. In response to the significant financial, social, and political implications of these figures, a range of processes have been put in place in an attempt to improve patient safety and quality care in Australia. Nonetheless, it is evident that more can be done to improve the status quo. One process that warrants consideration is that of peak health professional groups and organisations providing active leadership in the promotion of patient safety, such as by making a visible and recognisable commitment to patient safety as a strategic research priority area. In this paper it is contended that, given the moral importance of patient safety and quality care in nursing and related health care domains, the inseparable link between nursing practice and patient safety, and the central role that research has to play in driving safety improvements in these domains, it is morally imperative that the nursing profession gives sustained and focussed public attention to patient safety and quality care as a national research priority.

  17. Design, calibration, and operation of 220Rn stack effluent monitoring systems at Argonne National Laboratory.

    Science.gov (United States)

    Munyon, W J; Kretz, N D; Marchetti, F P

    1994-09-01

    A group of stack effluent monitoring systems have been developed to monitor discharges of 220Rn from a hot cell facility at Argonne National Laboratory. The stack monitors use flow-through scintillation cells and are completely microprocessor-based systems. A method for calibrating the stack monitors in the laboratory and in the field is described. A nominal calibration factor for the stack monitoring systems in use is 15.0 cts min-1 per kBq m-3 (0.56 cts min-1 per pCi L-1) +/- 26% at the 95% confidence level. The plate-out fraction of decay products in the stack monitor scintillation cells, without any pre-filtering, was found to be nominally 25% under normal operating conditions. When the sample was pre-filtered upstream of the scintillation cell, the observed cell plate-out fraction ranged from 16-22%, depending on the specific sampling conditions. The instantaneous 220Rn stack concentration can be underestimated or overestimated when the steady state condition established between 220Rn and its decay products in the scintillation cell is disrupted by sudden changes in the monitored 220Rn concentration. For long-term measurements, however, the time-averaged response of the monitor represents the steady state condition and leads to a reasonable estimate of the average 220Rn concentration during the monitoring period.

  18. The National Traumatic Coma Data Bank. Part 1: Design, purpose, goals, and results.

    Science.gov (United States)

    Marshall, L F; Becker, D P; Bowers, S A; Cayard, C; Eisenberg, H; Gross, C R; Grossman, R G; Jane, J A; Kunitz, S C; Rimel, R; Tabaddor, K; Warren, J

    1983-08-01

    This paper describes the pilot phase of the National Traumatic Coma Data Bank, a cooperative effort of six clinical head-injury centers in the United States. Data were collected on 581 hospitalized patients with severe non-penetrating traumatic head injury. Severe head injury was defined on the basis of a Glasgow Coma Scale (GCS) score of 8 or less following nonsurgical resuscitation or deterioration to a GCS score of 8 or less within 48 hours after head injury. A common data collection protocol, definitions, and data collection instruments were developed and put into use by all centers commencing in June, 1979. Extensive information was collected on pre-hospital, emergency room, intensive care, and recovery phases of patient care. Data were obtained on all patients from the time of injury until the end of the pilot study. The pilot phase of the Data Bank provides data germane to questions of interest to neurosurgeons and to the lay public. Questions are as diverse as: what is the prognosis of severe brain injury; what is the impact of emergency care; and what is the role of rehabilitation in the recovery of the severely head-injured patient?

  19. Design of a Large Bore 60-T Pulse Magnet for Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    LESCH,B.; LI,L.; PERNAMBUCO-WISE,P.; ROVANG,DEAN C.; SCHNEIDER-MUNTAU,H.J.

    1999-09-23

    The design of a new pulsed magnet system for the generation of intense electron beams is presented. Determined by the required magnetic field profile along the axis, the magnet system consists of two coils (Coil No.1 and No.2) separated by a 32-mm axial gap. Each coil is energized independently. Both coils are internally reinforced with HIM Zylon fiber/epoxy composite. Coil No.1 made with AI-15 Glidcop wire has a bore of 110-mm diameter and is 200-mm long; it is energized by a 1.3-MJ, 13-kV capacitor bank. The magnetic field at the center of this coil is 30 T. Coil No.2 made with CuNb wire has a bore of 45 mm diameter, generates 60 T with a pulse duration of 60 ms, and is powered by a 4.0-MJ, 17.7-kV capacitor bank. We present design criteria, the coupling of the magnets, and the normal and the fault conditions during operation.

  20. HIERARCHICAL OPTIMIZATION MODEL ON GEONETWORK

    Directory of Open Access Journals (Sweden)

    Z. Zha

    2012-07-01

    Full Text Available In existing construction experience of Spatial Data Infrastructure (SDI, GeoNetwork, as the geographical information integrated solution, is an effective way of building SDI. During GeoNetwork serving as an internet application, several shortcomings are exposed. The first one is that the time consuming of data loading has been considerately increasing with the growth of metadata count. Consequently, the efficiency of query and search service becomes lower. Another problem is that stability and robustness are both ruined since huge amount of metadata. The final flaw is that the requirements of multi-user concurrent accessing based on massive data are not effectively satisfied on the internet. A novel approach, Hierarchical Optimization Model (HOM, is presented to solve the incapability of GeoNetwork working with massive data in this paper. HOM optimizes the GeoNetwork from these aspects: internal procedure, external deployment strategies, etc. This model builds an efficient index for accessing huge metadata and supporting concurrent processes. In this way, the services based on GeoNetwork can maintain stable while running massive metadata. As an experiment, we deployed more than 30 GeoNetwork nodes, and harvest nearly 1.1 million metadata. From the contrast between the HOM-improved software and the original one, the model makes indexing and retrieval processes more quickly and keeps the speed stable on metadata amount increasing. It also shows stable on multi-user concurrent accessing to system services, the experiment achieved good results and proved that our optimization model is efficient and reliable.

  1. The study and design of a national supply chain for the aerospace titanium components manufacturing industry

    Directory of Open Access Journals (Sweden)

    Lene van der Merwe

    2012-11-01

    Full Text Available Titanium’s strength-to-density ratio, corrosion resistance and high thermal compatibility makes it the perfect metal for aerospace. Titanium is for instance used for the structural airframe, seat tracks, engine components and landing gear of aircraft. The Boeing 787 that had its test flight in 2009 is one of the latest aircraft designs that incorporates a substantially higher percentage of parts manufactured from titanium due to the weight benefit. Titanium’s extensive use in aerospace applications ensures that the aerospace market is the main driver of titanium metal demand. South Africa is the second largest titanium producer in the world after Australia. The abundance of titanium in South Africa together with the growing demand has led it to be identified as a beneficiation priority in a collaborative government initiative, called Titanium Beneficiation Initiative (TBI. The purpose of this paper is to develop a supply chain model for the anticipated South African titanium component manufacturing industry.

  2. Methodology and Policy of Designing and Implementing the National Qualification System

    Directory of Open Access Journals (Sweden)

    A. N. Leybovitch

    2012-01-01

    Full Text Available The paper looks at the current research in the field of the new qualification system development, procedures and outcomes of devising its elements and their influence on vocational training development. The author takes the methodology of the system analysis in the labor and training spheres as the scientific basis for solving the above problems.The main emphasis is on the new approach, which provides the comprehensive analysis of the integrated and complete labor process instead of the in-depth analysis of separate specialties. The above approach was developed and applied in the methodological schemes for creating the national qualification framework and professional standards. The research findings include defining the functions and goals of the new qualification system; methodology tools for its formation; current analysis and immediate tasks of the state policy concerning the given sphere. The research is aimed at the practical application of the Russian vocational training at all levels in the course of modernization. The necessary methodology basis is given for devising a new structure of vocational training system, as well as the new generation of educational programs meant to meet the demand for the personnel in the modern Russian economy. The necessity of integrating the approach to labor and training on a new methodological basis is substantiated. The introduction of the new qualification framework should correspond with the changes in the assessment mechanism of training outcomes. The existing legal base of the Russian system of vocational training, unable to correlate the vocational training and economy, should be further developed. 

  3. Hydro/Engineering Geophysical Parameters and Design Response Spectrum for Sustainable Development in Ras Muhammed National Park, Sinai

    Science.gov (United States)

    Khalil, Mohamed H.; Gamal, Mohamed A.

    2016-06-01

    The Egyptian government is preparing a sustainable development master plan for the Ras Muhammed National Park (RMNP), south Sinai. Noteworthy, the scarcity of the freshwater resources and close proximity to the active seismic zones of the Gulf of Aqaba implicate geophysical investigations for the fresh groundwater aquifers and construct a design response spectrum, respectively. Accordingly, 14 VESs, hydro/engineering geophysical analysis, pumping tests, downhole seismic test, a design response spectrum for buildings, and borehole data were carried out in the study area. The unconfined freshwater aquifer was effectively depicted with true resistivities, thickness, and EC ranged from 56 to 135 Ω m, 11 to 112 m, and 1.4 to 7.1 mS/m, respectively. The Northeastern part was characterized by higher aquifer potentiality, where coarser grains size, highest thickness (112 m), high true resistivity (135 Ω m), groundwater flow (0.074 m3/day), tortuosity (1.293-1.312), formation resistivity factor (4.1-4.6), and storativity (0.281-0.276). An increase in pumping rate was accompanied by an increase in well loss, increase in aquifer losses, decrease in well specific capacity, and decrease in well efficiency. Design response spectrum prognosticated the short buildings (<7 floors) in RMNP to be suffering from a high peak horizontal acceleration and shear forces for acceleration between 0.25 and 0.35 g. Therefore, appropriate detailing of shear reinforcement is indispensable to reduce the risk of structural damages at RMNP.

  4. Design and Performance of the First Dual-Coil Magnet at the Wuhan National High Magnetic Field Center

    Science.gov (United States)

    Peng, T.; Sun, Q. Q.; Zhang, X.; Xu, Q.; Xiao, H. X.; Herlach, F.; Pan, Y.; Li, L.

    2013-03-01

    The first 80 T dual-coil magnet was manufactured and tested at the Wuhan National High Magnetic Field Center (WHMFC). The inner coil consists of 8 layers of 2.8 mm × 4.3 mm CuNb microcomposite wire developed in China; the bore diameter is 14 mm and the outer diameter 135 mm. The outer coil was wound directly on the inner coil with 12 layers of 3 mm × 6 mm soft copper. Each conductor layer of both coils was reinforced by Zylon/epoxy composite. The inner and outer coil were driven by a 1.6 MJ/5.12 mF capacitor bank and by eight 1 MJ/3.2 mF modules, respectively. At the voltage of 14.3 kV for the inner coil and 22 kV for the outer coil, the inner and outer coils produced peak fields of 48.5 T and 34.5 T respectively, which gave a total field of 83 T. This was the first combined operation of the new capacitor banks installed at the WHMFC. We present details of the design, manufacture and test of the dual-coil magnet and discuss crucial material properties. Based on this experience, a second dual-coil magnet will be designed; the enhanced design will be discussed. With the total energy of 12.6 MJ, peak field up to 90 T is expected.

  5. Coupled Mechanical-Electrochemical-Thermal Modeling for Accelerated Design of EV Batteries; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Pesaran, Ahmad; Zhang, Chao; Kim, Gi-heon; Santhanagopalan, Shriram

    2015-06-10

    The physical and chemical phenomena occurring in a battery are many and complex and in many different scales. Without a better knowledge of the interplay among the multi-physics occurring across the varied scales, it is very challenging and time consuming to design long-lasting, high-performing, safe, affordable large battery systems, enabling electrification of the vehicles and modernization of the grid. The National Renewable Energy Laboratory, a U.S. Department of Energy laboratory, has been developing thermal and electrochemical models for cells and battery packs. Working with software producers, carmakers, and battery developers, computer-aided engineering tools have been developed that can accelerate the electrochemical and thermal design of batteries, reducing time to develop and optimize them and thus reducing the cost of the system. In the past couple of years, we initiated a project to model the mechanical response of batteries to stress, strain, fracture, deformation, puncture, and crush and then link them to electrochemical and thermal models to predict the response of a battery. This modeling is particularly important for understanding the physics and processes that happen in a battery during a crush-inducing vehicle crash. In this paper, we provide an overview of electrochemical-thermal-mechanical models for battery system understanding and designing.

  6. Mobile Tourism Guide in the Context of Thai National Parks: The Effects of Mobile Design Qualities in TAM2

    Directory of Open Access Journals (Sweden)

    Trakulmaykee Numtip

    2014-01-01

    Full Text Available This study aims to predict the level of international tourists’ intention to use MTG in the context of Thai national parks, and investigates the roles of mobile design qualities (content quality, appearance quality, and interaction quality through perceived usefulness and perceived ease-of-use on intention. The mixed-method via exploratory sequential design is conducted this study. The qualitative approach is started in the first stage then quantitative approach is employed to analyze the large sample size. This study extends the TAM2 with mobile design qualities. The results shows the high level of international tourist’ intention to use MTG. It indicates that the international tourists will intent to the mobile tourism guide (MTG, if the MTG is provided for them. The direct factors of tourists’ intention are perceived usefulness, perceived ease-of-use, mobile content quality and mobile appearance quality. The most direct effect is mobile content quality. The qualities of content and appearance have the positive roles on perceived usefulness, while the qualities of appearance and interaction have the indirect effects through perceived ease-of-use on tourists’ intention. The proposed model provides the body of knowledge in the context of MTG, especially the factors of international tourists’ intention to use MTG.

  7. Designing Adult Education Activities: A Case of Civic Education Programmes by National Commission for Civic Education in the Ashaiman Municipality in Ghana

    Science.gov (United States)

    Afriyie, Sally Adwoa

    2015-01-01

    This article discusses the efficiency of the design of educational activities of the National Commission for Civic Education (NCCE) in Ashaiman municipality in Ghana. Using a descriptive case study design, data was collected from seven (7) Community Based Groups in Ashaiman. The results of the study indicated that to a large extent, there was…

  8. Designing Adult Education Activities: A Case of Civic Education Programmes by National Commission for Civic Education in the Ashaiman Municipality in Ghana

    Science.gov (United States)

    Afriyie, Sally Adwoa

    2015-01-01

    This article discusses the efficiency of the design of educational activities of the National Commission for Civic Education (NCCE) in Ashaiman municipality in Ghana. Using a descriptive case study design, data was collected from seven (7) Community Based Groups in Ashaiman. The results of the study indicated that to a large extent, there was…

  9. HIV testing during the Canadian immigration medical examination: a national survey of designated medical practitioners.

    Science.gov (United States)

    Tran, Jennifer M; Li, Alan; Owino, Maureen; English, Ken; Mascarenhas, Lyndon; Tan, Darrell H S

    2014-01-01

    HIV testing is mandatory for individuals wishing to immigrate to Canada. Since the Designated Medical Practitioners (DMPs) who perform these tests may have varying experience in HIV and time constraints in their clinical practices, there may be variability in the quality of pre- and posttest counseling provided. We surveyed DMPs regarding HIV testing, counseling, and immigration inadmissibility. A 16-item survey was mailed to all DMPs across Canada (N = 203). The survey inquired about DMP characteristics, knowledge of HIV, attitudes and practices regarding inadmissibility and counseling, and interest in continuing medical education. There were a total of 83 respondents (41%). Participants frequently rated their knowledge of HIV diagnostics, cultural competency, and HIV/AIDS service organizations as "fair" (40%, 43%, and 44%, respectively). About 25%, 46%, and 11% of the respondents agreed/strongly agreed with the statements "HIV infected individuals pose a danger to public health and safety," "HIV-positive immigrants cause excessive demand on the healthcare system," and "HIV seropositivity is a reasonable ground for denial into Canada," respectively. Language was cited as a barrier to counseling, which focused on transmission risks (46% discussed this as "always" or "often") more than coping and social support (37%). There was a high level of interest (47%) in continuing medical education in this area. There are areas for improvement regarding DMPs' knowledge, attitudes, and practices about HIV infection, counseling, and immigration criteria. Continuing medical education and support for DMPs to facilitate practice changes could benefit newcomers who test positive through the immigration process.

  10. Calculation set for design and optimization of vegetative soil covers Sandia National Laboratories, Albuquerque, New Mexico.

    Energy Technology Data Exchange (ETDEWEB)

    Peace, Gerald L.; Goering, Timothy James (GRAM, Inc., Albuquerque, NM)

    2005-02-01

    This study demonstrates that containment of municipal and hazardous waste in arid and semiarid environments can be accomplished effectively without traditional, synthetic materials and complex, multi-layer systems. This research demonstrates that closure covers combining layers of natural soil, native plant species, and climatic conditions to form a sustainable, functioning ecosystem will meet the technical equivalency criteria prescribed by the U. S. Environmental Protection Agency. In this study, percolation through a natural analogue and an engineered cover is simulated using the one-dimensional, numerical code UNSAT-H. UNSAT-H is a Richards. equation-based model that simulates soil water infiltration, unsaturated flow, redistribution, evaporation, plant transpiration, and deep percolation. This study incorporates conservative, site-specific soil hydraulic and vegetation parameters. Historical meteorological data are used to simulate percolation through the natural analogue and an engineered cover, with and without vegetation. This study indicates that a 3-foot (ft) cover in arid and semiarid environments is the minimum design thickness necessary to meet the U. S. Environmental Protection Agency-prescribed technical equivalency criteria of 31.5 millimeters/year and 1 x 10{sup -7} centimeters/second for net annual percolation and average flux, respectively. Increasing cover thickness to 4 or 5 ft results in limited additional improvement in cover performance.

  11. 77 FR 59599 - Notice of Public Meeting: Designing for Impact IV: Workshop on Building the National Network for...

    Science.gov (United States)

    2012-09-28

    ... on Building the National Network for Manufacturing Innovation AGENCY: Advanced Manufacturing Office... for Impact: Workshop on Building the National Network for Manufacturing Innovation. This workshop... March 9, 2012 announcement, President Obama proposed building a national network consisting of up to...

  12. Designating Earth's Moon as a United Nations World Heritage Site - Permanently Protected from Commercial or Military Uses

    Science.gov (United States)

    Steiner, R. G.

    2002-01-01

    This paper proposes that Earth's Moon, in its entirety, be designated a United Nations World Heritage Site (WHS), permanently protected from any and all commercial or military utilization and reserved exclusively for scientific and aesthetic purposes. The paper discusses: 1) the extraordinary importance of the Moon for science, culture, and religion - past, present and future; 2) the history of proposals to exploit the Moon for commercial and military purposes and the shortcomings of this colonial, exploitation paradigm; and 3) the necessity, policy mechanisms, and political dynamics of designating the Moon as a World Heritage Site, permanently protected from commercial and/or military uses. The first part of the paper discusses the extraordinary importance of the Moon as it exists today - as a scientific laboratory, a source of beauty and inspiration throughout human evolution, a source for artistic expression, and as an object that is considered sacred by many cultures. Next, the paper traces the history of specific proposals for the exploitation of the Moon for commercial and/or military purposes - including plans by the U.S. Air Force in 1959 to detonate a nuclear explosion on the Moon, proposals to strip-mine the lunar regolith for helium-3 and rocket-fuel hydrogen; construction of solar power plants to transmit energy to Earth, and proposals to use the lunar surface as a billboard upon which to project commercial advertisements visible from Earth. The profound ethical, legal, and scientific shortcomings of this exploitation paradigm are described as an emerging Extraterrestrial Manifest Destiny that we have a collective obligation to challenge and constrain. The paper proposes that space exploration be infused with an ethical commitment to compassion, reverence, conservation, and non-interference to abiotic and biotic systems alike; as opposed to the expansion and extraterrestrial imposition of the colonization, exploitation, domination, and despoliation

  13. Hierarchical linear regression models for conditional quantiles

    Institute of Scientific and Technical Information of China (English)

    TIAN Maozai; CHEN Gemai

    2006-01-01

    The quantile regression has several useful features and therefore is gradually developing into a comprehensive approach to the statistical analysis of linear and nonlinear response models,but it cannot deal effectively with the data with a hierarchical structure.In practice,the existence of such data hierarchies is neither accidental nor ignorable,it is a common phenomenon.To ignore this hierarchical data structure risks overlooking the importance of group effects,and may also render many of the traditional statistical analysis techniques used for studying data relationships invalid.On the other hand,the hierarchical models take a hierarchical data structure into account and have also many applications in statistics,ranging from overdispersion to constructing min-max estimators.However,the hierarchical models are virtually the mean regression,therefore,they cannot be used to characterize the entire conditional distribution of a dependent variable given high-dimensional covariates.Furthermore,the estimated coefficient vector (marginal effects)is sensitive to an outlier observation on the dependent variable.In this article,a new approach,which is based on the Gauss-Seidel iteration and taking a full advantage of the quantile regression and hierarchical models,is developed.On the theoretical front,we also consider the asymptotic properties of the new method,obtaining the simple conditions for an n1/2-convergence and an asymptotic normality.We also illustrate the use of the technique with the real educational data which is hierarchical and how the results can be explained.

  14. Multiscale Inorganic Hierarchically Materials: Towards an Improved Orthopaedic Regenerative Medicine.

    Science.gov (United States)

    Ruso, Juan M; Sartuqui, Javier; Messina, Paula V

    2015-01-01

    Bone is a biologically and structurally sophisticated multifunctional tissue. It dynamically responds to biochemical, mechanical and electrical clues by remodelling itself and accordingly the maximum strength and toughness are along the lines of the greatest applied stress. The challenge is to develop an orthopaedic biomaterial that imitates the micro- and nano-structural elements and compositions of bone to locally match the properties of the host tissue resulting in a biologically fixed implant. Looking for the ideal implant, the convergence of life and materials sciences occurs. Researchers in many different fields apply their expertise to improve implantable devices and regenerative medicine. Materials of all kinds, but especially hierarchical nano-materials, are being exploited. The application of nano-materials with hierarchical design to calcified tissue reconstructive medicine involve intricate systems including scaffolds with multifaceted shapes that provides temporary mechanical function; materials with nano-topography modifications that guarantee their integration to tissues and that possesses functionalized surfaces to transport biologic factors to stimulate tissue growth in a controlled, safe, and rapid manner. Furthermore materials that should degrade on a timeline coordinated to the time that takes the tissues regrow, are prepared. These implantable devices are multifunctional and for its construction they involve the use of precise strategically techniques together with specific material manufacturing processes that can be integrated to achieve in the design, the required multifunctionality. For such reasons, even though the idea of displacement from synthetic implants and tissue grafts to regenerative-medicine-based tissue reconstruction has been guaranteed for well over a decade, the reality has yet to emerge. In this paper, we examine the recent approaches to create enhanced bioactive materials. Their design and manufacturing procedures as well

  15. Effects of Cycle Length and Plot Density on Estimators for a National-Scale Forest Monitoring Sample Design

    Directory of Open Access Journals (Sweden)

    Francis A. Roesch

    2017-09-01

    Full Text Available The resilience of a National Forest Inventory and Monitoring sample design can sometimes depend upon the degree to which it can adapt to fluctuations in funding. If a budget reduction necessitates the observation of fewer plots per year, some practitioners weigh the problem as a tradeoff between reducing the total number of plots and measuring the original number of plots over a greater number of years. Here, we explore some of the effects of differing plot intensities and cycle lengths on variants of three general classes of estimators for annual cubic meter per hectare volume, using a simulated population and appropriately-graduated sampling simulations. The simulations showed that an increase in cycle length yielded quite dramatic effects while differences due to a simulated reduction in plot intensity had more subtle effects.

  16. After Action Report:Idaho National Laboratory (INL) 2014 Multiple Facility Beyond Design Basis (BDBE) Evaluated Drill October 21, 2014

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, V. Scott [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-12-01

    On October 21, 2014, Idaho National Laboratory (INL), in coordination with local jurisdictions, and Department of Energy (DOE) Idaho Operations Office (DOE ID) conducted an evaluated drill to demonstrate the ability to implement the requirements of DOE O 151.1C, “Comprehensive Emergency Management System” when responding to a beyond design basis event (BDBE) scenario as outlined in the Office of Health, Safety, and Security Operating Experience Level 1 letter (OE-1: 2013-01). The INL contractor, Battelle Energy Alliance, LLC (BEA), in coordination with CH2M-WG Idaho, LLC (CWI), and Idaho Treatment Group LLC (ITG), successfully demonstrated appropriate response measures to mitigate a BDBE event that would impact multiple facilities across the INL while protecting the health and safety of personnel, the environment, and property. Offsite response organizations participated to demonstrate appropriate response measures.

  17. The Design Fabrication Installation & Evaluation of the Balance Probe Monitor for Large Centrifuges at a National Laboratory Facility.

    Energy Technology Data Exchange (ETDEWEB)

    Gallegos, Jonathan Michael [Univ. of Texas, Austin, TX (United States)

    2016-11-01

    Balance Probe Monitors were designed, fabricated, installed, and evaluated at Sandia National Laboratories (SNL) for the 22,600 g kg (50,000 g lb) direct drive electromotor driven large centrifuges. These centrifuges provide a high onset/decay rate g environment. The Balance Probe Monitor is physically located near a centrifuge’s Capacitance Probe, a crucial sensor for the centrifuge’s sustainability. The Balance Probe Monitor will validate operability of the centrifuge. Most importantly, it is used for triggering a kill switch under the condition that the centrifuge displacement value exceeds allowed tolerances. During operational conditions, the Capacitance Probe continuously detects the structural displacement of the centrifuge and an adjoining AccuMeasure 9000 translates this displacement into an output voltage.

  18. Design and preliminary test results of the 40 MW power supply at the National High Magnetic Field Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Boenig, H.J. [Los Alamos National Lab., NM (United States); Bogdan, F.; Morris, G.C. [ABB Drives Inc., New Berlin, WI (United States); Ferner, J.A.; Schneider-Muntau, H.J. [National High Magnetic Field Lab., Tallahassee, FL (United States); Rumrill, R.H.; Rumrill, R.S. [Alpha Scientific Electronics Inc., Hayward, CA (United States)

    1993-11-01

    Four highly stabilized, steady-state, 10 MW power supplies have been installed at the National High Magnetic Field Laboratory in Tallahassee, FL. Each supply consists of a 12.5 kV vacuum circuit breaker, two three-winding, step-down transformers, a 24-pulse rectifier with interphase reactors and freewheeling diodes, and a passive and an active filter. Two different transformer tap settings allow dc supply output voltages of 400 and 500 V. The rated current of a supply is 17 kA and each supply has a one hour overload capability of 20 kA. The power supply output bus system, including a reversing switch at the input and 2 {times} 16 disconnect switches at the output, connects each supply to 16 different magnet cells. The design of the power supply is described and preliminary test results with a supply feeding a 10 MW resistive load are presented.

  19. Design, installation, and performance of a multi-layered permeable reactive barrier, Los Alamos National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Kaszuba, J. P. (John P.); Longmire, P. A. (Patrick A.); Strietelmeier, E. A. (Elizabeth A.); Taylor, T. P. (Tammy P.); Den-Baars, P. S. (Peter S.)

    2004-01-01

    A multi-layered permeable reactive barrier (PRB) has been installed in Mortandad Canyon, on the Pajarito Plateau in the north-central part of LANL, to demonstrate in-situ treatment of a suite of contaminants with dissimilar geochemical properties. The PRB will also mitigate possible vulnerabilities from downgradient contaminant movement within alluvial and deeper perched groundwater. Mortandad Canyon was selected as the location for this demonstration project because the flow of alluvial groundwater is constrained by the geology of the canyon, a large network of monitoring wells already were installed along the canyon reach, and the hydrochemistry and contaminant history of the canyon is well-documented. The PRB uses a funnel-and-gate system with a series of four reactive media cells to immobilize or destroy contaminants present in alluvial groundwater, including strontium-90, plutonium-238,239,240, americium-241, perchlorate, and nitrate. The four cells, ordered by sequence of contact with the groundwater, consist of gravel-sized scoria (for colloid removal); phosphate rock containing apatite (for metals and radionuclides); pecan shells and cotton seed admixed with gravel (bio-barrier, to deplete dissolved oxygen and destroy potential RCRA organic compounds, nitrate and perchlorate); and limestone (pH buffering and anion adsorption). Design elements of the PRB are based on laboratory-scale treatability studies and on a field investigation of hydrologic, geochemical, and geotechnical parameters. The PRB was designed with the following criteria: 1-day residence time within the biobarrier, 10-year lifetime, minimization of surface water infiltration and erosion, optimization of hydraulic capture, and minimization of excavated material requiring disposal. Each layer has been equipped with monitoring wells or ports to allow sampling of groundwater and reactive media, and monitor wells are located immediately adjacent to the up- and down-gradient perimeter of the

  20. Understanding of large Far Eastern organizational cultures in approaches to new product development process : designing versus controlling

    OpenAIRE

    Hwangbo, Hyunwook; Tsekleves, Emmanuel

    2014-01-01

    This paper explores how approaches to new product design can differ nationally when examining large organizational cultures between the East and the West, especially looking at different approaches in the context of ‘openness’. Currently, approaches to new product development in digital landscape have shifted to evolutionary perspectives, which embrace an ‘open’ context in the design process – ‘designing’, rather than single hierarchical and closed strategy for efficiency- ‘controlling’. This...

  1. The design, implementation, and operational management of a comprehensive quality management program to support national telehealth networks.

    Science.gov (United States)

    Darkins, Adam; Foster, Linda; Anderson, Carla; Goldschmidt, Leonard; Selvin, Gerald

    2013-07-01

    The Veterans Health Administration (VHA) is a large integrated healthcare system with a mission to care for over 5.6 million Veteran patients annually. VHA, like other healthcare organizations, is challenged with providing access to care to those it serves when they live at a distance from a physical site of care. VHA has embraced telehealth as a way of delivering care at a distance and increase access to specialty care services. Since 2003 VHA has developed large national telehealth networks that provided care to 497,342 patients in fiscal year 2012, who received 1,429,424 episodes of care, and is recognized as a national leader in this field. To ensure the safety and effectiveness of its telehealth networks in their delivery of care VHA has implemented a dedicated quality management (QM) program for telehealth. QM data for telehealth are reviewed at 3-month intervals, and the procedures and processes in place to support telehealth in VHA are assessed biannually in an internal accreditation process called "Telehealth Conditions of Participation." This collegial, nonadversarial process has ensured that all designated telehealth programs meet minimal standards and disseminate best practice. As a result of VHA's QM program, telehealth services in VHA meet consistently high clinical outcomes and have received no adverse Joint Commission citations. The Joint Commission regularly assesses patients managed via telehealth under its tracer methodology reviews.

  2. The use of beam propagation modeling of Beamlet and Nova to ensure a ``safe`` National Ignition Facility laser system design

    Energy Technology Data Exchange (ETDEWEB)

    Henesian, M.A.; Renard, P.; Auerbach, J. [and others

    1997-03-17

    An exhaustive set of Beamlet and Nova laser system simulations were performed over a wide range of power levels in order to gain understanding about the statistical trends in Nova and Beamlet`s experimental data sets, and to provide critical validation of propagation tools and design ``rules`` applied to the 192-arm National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL). The experiments considered for modeling were at 220-ps FWHM duration with unpumped booster slabs on Beamlet, and 100-ps FWHM with pumped 31.5-cm and 46-cm disk amplifiers on Nova. Simulations indicated that on Beamlet, the AB (the intensity pendent phase shift parameter characterizing the tendency towards beam filamentation) for the booster amplifier stage without pumping, would be nearly identical to the AB expected on NIF at the peak of a typical 20-ns long shaped pulse intended for ICF target irradiation. Therefore, with energies less than I kJ in short-pulses, we examined on Beamlet the comparable AB-driven filamentation conditions predicted for long ICF pulseshapes in the 18 kJ regime on the NIF, while avoiding fluence dependent surface damage. Various spatial filter pinhole configurations were examined on Nova and Beamlet. Open transport spatial filter pinholes were used in some experiments to allow the direct measurement of the onset of beam filamentation. Schlieren images on Beamlet of the far field irradiance measuring the scattered light fraction outside of 33-{micro}radians were also obtained and compared to modeled results.

  3. Design and analysis of x-ray driven shock wave equation-of-state experiments on the National Ignition Facility

    Science.gov (United States)

    London, R. A.; Lazicki, A.; Celliers, P. M.; Erskine, D. J.; Fratanduono, D. E.; Meezan, N. B.; Peterson, J. L.; NIF EOS Team

    2016-10-01

    The equation-of-state (EOS) is important for describing and predicting material properties in the field of high energy density physics. Especially important is the EOS of materials compressed and heated from ambient conditions by shockwaves. For most materials, experimental data at high pressures, much above 10 Mbar, is sparse. The large energy and power of the National Ignition Facility readily enable EOS experiments in a new regime, at pressures on order of 100 Mbar. We describe a platform for EOS measurements using planar shockwaves driven by x rays within a hohlraum target. The EOS is determined by an impedance matching method, using a reference material of known EOS. For transparent materials, the shock velocity is measured directly by optical interferometry, while for opaque materials, the measurement is done by timing the entrance and exit of the shock and correcting for time variations with an adjacent transparent reference. We describe the computational design and analysis of experiments. Predicted shock velocities and transit times are used to set the target layer thicknesses and interferometer timing. Data from several NIF shots are compared to post-shot calculations. New, high pressure EOS data is presented for several materials. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

  4. Hierarchical Visual Analysis and Steering Framework for Astrophysical Simulations

    Institute of Scientific and Technical Information of China (English)

    肖健; 张加万; 原野; 周鑫; 纪丽; 孙济洲

    2015-01-01

    A framework for accelerating modern long-running astrophysical simulations is presented, which is based on a hierarchical architecture where computational steering in the high-resolution run is performed under the guide of knowledge obtained in the gradually refined ensemble analyses. Several visualization schemes for facilitating ensem-ble management, error analysis, parameter grouping and tuning are also integrated owing to the pluggable modular design. The proposed approach is prototyped based on the Flash code, and it can be extended by introducing user-defined visualization for specific requirements. Two real-world simulations, i.e., stellar wind and supernova remnant, are carried out to verify the proposed approach.

  5. Optimal DVB-S2 spectral efficiency with hierarchical modulation

    OpenAIRE

    Meric, Hugo

    2014-01-01

    We study the design of a DVB-S2 system in order to maximise spectral efficiency. This task is usually challenging due to channel variability. The solution adopted in modern satellite communications systems such as DVB-SH and DVB-S2 relies mainly on a time sharing strategy. Recently, we proposed to combine time sharing with hierarchical modulation to increase the transmission rate of broadcast systems. However, the optimal spectral efficiency remained an open question. In this paper, we show t...

  6. Extended hierarchical temporal memory for visual object tracking

    Science.gov (United States)

    Kryś, Sebastian; Jankowski, Stanisław

    2011-10-01

    A system for simultaneous multi-obstacle recognition and tracking is proposed. Based on the novel Hierarchical Temporal Memory algorithm, it is design for application in vision problems but generally not constrained to it. Thanks to its modular and mostly parallel architecture it can be easily implemented in distributed environment attaining significant computation speed and thus it is suited for real-time processing tasks like visual data processing in mobile robotics. Derived from standard neural network paradigm the system can extract information concerning position, relative speed and type of an obstacle in a dynamically changing environment. It can be easily enhanced for basic prediction tasks.

  7. Self-assembled biomimetic superhydrophobic hierarchical arrays.

    Science.gov (United States)

    Yang, Hongta; Dou, Xuan; Fang, Yin; Jiang, Peng

    2013-09-01

    Here, we report a simple and inexpensive bottom-up technology for fabricating superhydrophobic coatings with hierarchical micro-/nano-structures, which are inspired by the binary periodic structure found on the superhydrophobic compound eyes of some insects (e.g., mosquitoes and moths). Binary colloidal arrays consisting of exemplary large (4 and 30 μm) and small (300 nm) silica spheres are first assembled by a scalable Langmuir-Blodgett (LB) technology in a layer-by-layer manner. After surface modification with fluorosilanes, the self-assembled hierarchical particle arrays become superhydrophobic with an apparent water contact angle (CA) larger than 150°. The throughput of the resulting superhydrophobic coatings with hierarchical structures can be significantly improved by templating the binary periodic structures of the LB-assembled colloidal arrays into UV-curable fluoropolymers by a soft lithography approach. Superhydrophobic perfluoroether acrylate hierarchical arrays with large CAs and small CA hysteresis can be faithfully replicated onto various substrates. Both experiments and theoretical calculations based on the Cassie's dewetting model demonstrate the importance of the hierarchical structure in achieving the final superhydrophobic surface states. Copyright © 2013 Elsevier Inc. All rights reserved.

  8. Analysis hierarchical model for discrete event systems

    Science.gov (United States)

    Ciortea, E. M.

    2015-11-01

    The This paper presents the hierarchical model based on discrete event network for robotic systems. Based on the hierarchical approach, Petri network is analysed as a network of the highest conceptual level and the lowest level of local control. For modelling and control of complex robotic systems using extended Petri nets. Such a system is structured, controlled and analysed in this paper by using Visual Object Net ++ package that is relatively simple and easy to use, and the results are shown as representations easy to interpret. The hierarchical structure of the robotic system is implemented on computers analysed using specialized programs. Implementation of hierarchical model discrete event systems, as a real-time operating system on a computer network connected via a serial bus is possible, where each computer is dedicated to local and Petri model of a subsystem global robotic system. Since Petri models are simplified to apply general computers, analysis, modelling, complex manufacturing systems control can be achieved using Petri nets. Discrete event systems is a pragmatic tool for modelling industrial systems. For system modelling using Petri nets because we have our system where discrete event. To highlight the auxiliary time Petri model using transport stream divided into hierarchical levels and sections are analysed successively. Proposed robotic system simulation using timed Petri, offers the opportunity to view the robotic time. Application of goods or robotic and transmission times obtained by measuring spot is obtained graphics showing the average time for transport activity, using the parameters sets of finished products. individually.

  9. Hierarchical models and chaotic spin glasses

    Science.gov (United States)

    Berker, A. Nihat; McKay, Susan R.

    1984-09-01

    Renormalization-group studies in position space have led to the discovery of hierarchical models which are exactly solvable, exhibiting nonclassical critical behavior at finite temperature. Position-space renormalization-group approximations that had been widely and successfully used are in fact alternatively applicable as exact solutions of hierarchical models, this realizability guaranteeing important physical requirements. For example, a hierarchized version of the Sierpiriski gasket is presented, corresponding to a renormalization-group approximation which has quantitatively yielded the multicritical phase diagrams of submonolayers on graphite. Hierarchical models are now being studied directly as a testing ground for new concepts. For example, with the introduction of frustration, chaotic renormalization-group trajectories were obtained for the first time. Thus, strong and weak correlations are randomly intermingled at successive length scales, and a new microscopic picture and mechanism for a spin glass emerges. An upper critical dimension occurs via a boundary crisis mechanism in cluster-hierarchical variants developed to have well-behaved susceptibilities.

  10. Idaho National Laboratory Lead or Lead-Bismuth Eutectic (LBE) Test Facility - R&D Requirements, Design Criteria, Design Concept, and Concept Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Eric P. Loewen; Paul Demkowicz

    2005-05-01

    The Idaho National Laboratory Lead-Bismuth Eutectic Test Facility will advance the state of nuclear technology relative to heavy-metal coolants (primarily Pb and Pb-Bi), thereby allowing the U.S. to maintain the pre-eminent position in overseas markets and a future domestic market. The end results will be a better qualitative understanding and quantitative measure of the thermal physics and chemistry conditions in the molten metal systems for varied flow conditions (single and multiphase), flow regime transitions, heat input methods, pumping requirements for varied conditions and geometries, and corrosion performance. Furthering INL knowledge in these areas is crucial to sustaining a competitive global position. This fundamental heavy-metal research supports the National Energy Policy Development Group’s stated need for energy systems to support electrical generation.1 The project will also assist the Department of Energy in achieving goals outlined in the Nuclear Energy Research Advisory Committee Long Term Nuclear Technology Research and Development Plan,2 the Generation IV Roadmap for Lead Fast Reactor development, and Advanced Fuel Cycle Initiative research and development. This multi-unit Lead-Bismuth Eutectic Test Facility with its flexible and reconfigurable apparatus will maintain and extend the U.S. nuclear knowledge base, while educating young scientists and engineers. The uniqueness of the Lead-Bismuth Eutectic Test Facility is its integrated Pool Unit and Storage Unit. This combination will support large-scale investigation of structural and fuel cladding material compatibility issues with heavy-metal coolants, oxygen chemistry control, and thermal hydraulic physics properties. Its ability to reconfigure flow conditions and piping configurations to more accurately approximate prototypical reactor designs will provide a key resource for Lead Fast Reactor research and development. The other principal elements of the Lead-Bismuth Eutectic Test Facility

  11. Study of hierarchical federation architecture using multi-resolution modeling

    Institute of Scientific and Technical Information of China (English)

    HAO Yan-ling; SHEN Dong-hui; QIAN Hua-ming; DENG Ming-hui

    2004-01-01

    This paper aims at finding a solution to the problem aroused in complex system simulation, where a specific functional federation is coupled with other simulation systems. In other words, the communication information within the system may be received by other federates that participated in this united simulation. For the purpose of ensuring simulation system unitary character, a hierarchical federation architecture (HFA) is taken. Also considering the real situation, where federates in a complicated simulation system can be made simpler to an extent, a multi-resolution modeling (MRM) method is imported to implement the design of hierarchical federation. By utilizing the multiple resolution entity (MRE) modeling approach, MRE for federates are designed out. When different level training simulation is required, the appropriate MRE at corresponding layers can be called. The design method realizes the reuse feature of the simulation system and reduces simulation complexity and improves the validity of system Simulation Cost (SC). Taking submarine voyage training simulator (SVTS) for instance, a HFA for submarine is constructed inthis paper, which approves the feasibility of studied approach.

  12. Hierarchical zeolites from class F coal fly ash

    Science.gov (United States)

    Chitta, Pallavi

    Fly ash, a coal combustion byproduct is classified as types class C and class F. Class C fly ash is traditionally recycled for concrete applications and Class F fly ash often disposed in landfills. Class F poses an environmental hazard due to disposal and leaching of heavy metals into ground water and is important to be recycled in order to mitigate the environmental challenges. A major recycling option is to reuse the fly ash as a low-cost raw material for the production of crystalline zeolites, which serve as catalysts, detergents and adsorbents in the chemical industry. Most of the prior literature of fly ash conversion to zeolites does not focus on creating high zeolite surface area zeolites specifically with hierarchical pore structure, which are very important properties in developing a heterogeneous catalyst for catalysis applications. This research work aids in the development of an economical process for the synthesis of high surface area hierarchical zeolites from class F coal fly ash. In this work, synthesis of zeolites from fly ash using classic hydrothermal treatment approach and fusion pretreatment approach were examined. The fusion pretreatment method led to higher extent of dissolution of silica from quartz and mullite phases, which in turn led to higher surface area and pore size of the zeolite. A qualitative kinetic model developed here attributes the difference in silica content to Si/Al ratio of the beginning fraction of fly ash. At near ambient crystallization temperatures and longer crystallization times, the zeolite formed is a hierarchical faujasite with high surface area of at least 360 m2/g. This work enables the large scale recycling of class F coal fly ash to produce zeolites and mitigate environmental concerns. Design of experiments was used to predict surface area and pore sizes of zeolites - thus obviating the need for intense experimentation. The hierarchical zeolite catalyst supports tested for CO2 conversion, yielded hydrocarbons

  13. Hierarchical linear model: thinking outside the traditional repeated-measures analysis-of-variance box.

    Science.gov (United States)

    Lininger, Monica; Spybrook, Jessaca; Cheatham, Christopher C

    2015-04-01

    Longitudinal designs are common in the field of athletic training. For example, in the Journal of Athletic Training from 2005 through 2010, authors of 52 of the 218 original research articles used longitudinal designs. In 50 of the 52 studies, a repeated-measures analysis of variance was used to analyze the data. A possible alternative to this approach is the hierarchical linear model, which has been readily accepted in other medical fields. In this short report, we demonstrate the use of the hierarchical linear model for analyzing data from a longitudinal study in athletic training. We discuss the relevant hypotheses, model assumptions, analysis procedures, and output from the HLM 7.0 software. We also examine the advantages and disadvantages of using the hierarchical linear model with repeated measures and repeated-measures analysis of variance for longitudinal data.

  14. Hierarchical Linear Model: Thinking Outside the Traditional Repeated-Measures Analysis-of-Variance Box

    Science.gov (United States)

    Lininger, Monica; Spybrook, Jessaca; Cheatham, Christopher C.

    2015-01-01

    Longitudinal designs are common in the field of athletic training. For example, in the Journal of Athletic Training from 2005 through 2010, authors of 52 of the 218 original research articles used longitudinal designs. In 50 of the 52 studies, a repeated-measures analysis of variance was used to analyze the data. A possible alternative to this approach is the hierarchical linear model, which has been readily accepted in other medical fields. In this short report, we demonstrate the use of the hierarchical linear model for analyzing data from a longitudinal study in athletic training. We discuss the relevant hypotheses, model assumptions, analysis procedures, and output from the HLM 7.0 software. We also examine the advantages and disadvantages of using the hierarchical linear model with repeated measures and repeated-measures analysis of variance for longitudinal data. PMID:25875072

  15. 76 FR 13499 - Designation of Officers of the Office of the Director of National Intelligence To Act as Director...

    Science.gov (United States)

    2011-03-11

    ... National Intelligence To Act as Director of National Intelligence Memorandum for the Director of National Intelligence By the authority vested in me as President by the Constitution and the laws of the United States... the Office of the Director of National Intelligence named in section 2, in the order listed, shall...

  16. 78 FR 59159 - Designation of Officers of the Office of the Director of National Intelligence To Act as Director...

    Science.gov (United States)

    2013-09-25

    ... National Intelligence To Act as Director of National Intelligence Memorandum for the Director of National Intelligence By the authority vested in me as President by the Constitution and the laws of the United States... of the Office of the Director of National Intelligence, in the order listed, shall act as and...

  17. Design, construction, and implementation of a ground-based solar spectrograph for the National Student Solar Spectrograph Competition

    Science.gov (United States)

    Keeler, E.; Moen, D.; Peck, C.; Zimny, C.; Repasky, K.

    2012-10-01

    A solar spectrograph is an instrument that takes incoming sunlight over a specified portion of the sun's emitted electromagnetic spectrum and separates the light into its constituent frequency components, or spectrum. The components are then sent to a detector that measures intensity, which reveals the location of spectral properties of the light such as absorption and emission lines. The National Student Solar Spectrograph Competition (NSSSC) is a Montana Space Grant Consortium sponsored competition where undergraduate student teams from across the country design, build, and implement a ground-based solar spectrograph to perform any solar related task and demonstrate their spectrographs for the competition in May 2012 in Bozeman, MT. Each team is given a 2,000-dollar budget to build their spectrograph, which cannot be exceeded, and all spectrographs must follow regulations in the NSSSC guidelines. This team designed a spectrograph to be capable of imaging the sun across the visible spectrum using spatial filters and a standard photo detector rather than a traditional charge-coupled device due to budget limitations. The spectrograph analyzes the spectrum of small sections of the sun to determine how the spectrum varies across solar features such as the corona, active regions, and quiet regions. In addition to solar imaging, the spectrograph will also analyze atmospheric absorption of the solar spectrum by comparing the measured spectrum to the theoretical spectrum calculated from the blackbody equation.

  18. A national upgrade of the climate monitoring grid in Sri Lanka. The place of Open Design, OSHW and FOSS.

    Science.gov (United States)

    Chemin, Yann; Bandara, Niroshan; Eriyagama, Nishadi

    2015-04-01

    The National Climate Observatory of Sri lanka is a proposition designed for the Government of Sri Lanka in September and discussed with private and public stakeholders in November 2014. The idea was initially to install a networked grid of weather instruments from locally-made open source hardware technology, on land and seas, that report live the state of climate. After initial stakeholder meetings, it was agreed to first try to connect any existing weather stations from different governmental and private sector agencies. This would bring existing information to a common ground through the Internet. At this point, it was realized that extracting information from various vendors set up would take a large amount of efforts, that is still the best and fastest anyway, as considerations from ownership and maintenance are the most important issues in a tropical humid country as Sri Lanka. Thus, the question of Open Design, open source hardware (OSHW) and free and open source software (FOSS) became a pivotal element in considering operationalization of any future elements of a national grid. Reasons range from ownership, to low-cost and customization, but prominently it is about technology ownership, royalty-free and local availability. Building on previous work from (Chemin and Bandara, 2014) we proposed to open design specifications and prototypes for weather monitoring for various kinds of needs, the Meteorological Department clearly specified that the highest variability observed spatially in Sri Lanka is rainfall, and their willingness to investigate OSHW electronics using their new team of electronics and sensors specialists. A local manufacturer is providing an OSHW micro-controller product, a start up is providing additional sensor boards under OSHW specifications and local manufacture of the sensors (tipping-bucket and other wind sensors) is under development and blueprints have been made available in the Public Domain for CNC machine, 3D printing or Plastic

  19. Biased trapping issue on weighted hierarchical networks

    Indian Academy of Sciences (India)

    Meifeng Dai; Jie Liu; Feng Zhu

    2014-10-01

    In this paper, we present trapping issues of weight-dependent walks on weighted hierarchical networks which are based on the classic scale-free hierarchical networks. Assuming that edge’s weight is used as local information by a random walker, we introduce a biased walk. The biased walk is that a walker, at each step, chooses one of its neighbours with a probability proportional to the weight of the edge. We focus on a particular case with the immobile trap positioned at the hub node which has the largest degree in the weighted hierarchical networks. Using a method based on generating functions, we determine explicitly the mean first-passage time (MFPT) for the trapping issue. Let parameter (0 < < 1) be the weight factor. We show that the efficiency of the trapping process depends on the parameter a; the smaller the value of a, the more efficient is the trapping process.

  20. Incentive Mechanisms for Hierarchical Spectrum Markets

    CERN Document Server

    Iosifidis, George; Alpcan, Tansu; Koutsopoulos, Iordanis

    2011-01-01

    We study spectrum allocation mechanisms in hierarchical multi-layer markets which are expected to proliferate in the near future based on the current spectrum policy reform proposals. We consider a setting where a state agency sells spectrum to Primary Operators (POs) and in turn these resell it to Secondary Operators (SOs) through auctions. We show that these hierarchical markets do not result in a socially efficient spectrum allocation which is aimed by the agency, due to lack of coordination among the entities in different layers and the inherently selfish revenue-maximizing strategy of POs. In order to reconcile these opposing objectives, we propose an incentive mechanism which aligns the strategy and the actions of the POs with the objective of the agency, and thus it leads to system performance improvement in terms of social welfare. This pricing based mechanism constitutes a method for hierarchical market regulation and requires the feedback provision from SOs. A basic component of the proposed incenti...