WorldWideScience

Sample records for hierarchical power control

  1. Hierarchical Power Sharing Control in DC Microgrids

    DEFF Research Database (Denmark)

    Peyghami Akhuleh, Saeed; Mokhtari, Hossein; Blaabjerg, Frede

    2016-01-01

    Because of the advances in power electronics, DC-based power systems, have been used in industrial applications such as data centers [18], space applications [10], aircraft [12], offshore wind farms, electric vehicles [56], DC home systems [5, 20], and high-voltage DC transmission systems...

  2. Hierarchical model-based predictive control of a power plant portfolio

    DEFF Research Database (Denmark)

    Edlund, Kristian; Bendtsen, Jan Dimon; Jørgensen, John Bagterp

    2011-01-01

    control” – becomes increasingly important as the ratio of renewable energy in a power system grows. As a consequence, tomorrow's “smart grids” require highly flexible and scalable control systems compared to conventional power systems. This paper proposes a hierarchical model-based predictive control...... design for power system portfolio control, which aims specifically at meeting these demands.The design involves a two-layer hierarchical structure with clearly defined interfaces that facilitate an object-oriented implementation approach. The same hierarchical structure is reflected in the underlying...

  3. Distributed Hierarchical Control of Multi-Area Power Systems with Improved Primary Frequency Regulation

    Energy Technology Data Exchange (ETDEWEB)

    Lian, Jianming; Marinovici, Laurentiu D.; Kalsi, Karanjit; Du, Pengwei; Elizondo, Marcelo A.

    2012-12-12

    The conventional distributed hierarchical control architecture for multi-area power systems is revisited. In this paper, a new distributed hierarchical control architecture is proposed. In the proposed architecture, pilot generators are selected in each area to be equipped with decentralized robust control as a supplementary to the conventional droop speed control. With the improved primary frequency control, the system frequency can be restored to the nominal value without the help of secondary frequency control, which reduces the burden of the automatic generation control for frequency restoration. Moreover, the low frequency inter-area electromechanical oscillations can also be effectively damped. The effectiveness of the proposed distributed hierarchical control architecture is validated through detailed simulations.

  4. Distributed Hierarchical Control Architecture for Transient Dynamics Improvement in Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Marinovici, Laurentiu D.; Lian, Jianming; Kalsi, Karanjit; Du, Pengwei; Elizondo, Marcelo A.

    2013-08-24

    In this paper, a novel distributed hierarchical coordinated control architecture is proposed for large scale power systems. The newly considered architecture facilitates frequency restoration and power balancing functions to be decoupled and implemented at different levels. At the local level, decentralized robust generator controllers are designed to quickly restore frequency after large faults and disturbances in the system. The controllers presented herein are shown to improve transient stability performance, as compared to conventional governor and excitation control. At the area level, Automatic Generation Control (AGC) is modified and coordinates with the decentralized robust controllers to reach the interchange schedule in the tie lines. The interaction of local and zonal controllers is validated through detailed simulations.

  5. A Hierarchical Control Scheme for Reactive Power and Harmonic Current Sharing in Islanded Microgrids

    DEFF Research Database (Denmark)

    Lorzadeh, Iman; Firoozabadi, Mehdi Savaghebi; Askarian Abyaneh, Hossein

    2015-01-01

    of each inverter output current are extracted at primary level and transmitted to the secondary controller. Then, instantaneous circulating currents at different frequencies are calculated and applied by the secondary level to generate proper control signals for accurate reactive power and harmonic......In this paper, a hierarchical control scheme consisting of primary and secondary levels is proposed for achieving accurate reactive power and harmonic currents sharing among interface inverters of distributed generators (DGs) in islanded microgrids. Firstly, fundamental and main harmonic components...... current sharing among the inverters. Consequently, these signals are sent to the primary level and inserted as voltage references after passing the control blocks. In contrast to the conventional virtual impedance schemes, where reactive power and harmonic current sharing are realized at the expense...

  6. Development of design support tool using integrated hierarchical control chart (HCC) and IEC61131 for nuclear power plant control

    Energy Technology Data Exchange (ETDEWEB)

    Nasimi, E.; Gabbar, H.A. [Univ. of Ontario Inst. of Tech., Oshawa, Ontario (Canada)

    2009-07-01

    This paper proposes a new intelligent and highly automated Hierarchical Control Chart (HCC) and operations mapping solution for nuclear power plant operators that provides control system designers, developers and operators with a single view of all elements and systems across a power plant with the integrated interactive data access and information retrieval capabilities that enables a faster fault diagnostics as well aids in a more efficient decision making for the routine daily tasks. (author)

  7. Adaptive Hierarchical Voltage Control of a DFIG-Based Wind Power Plant for a Grid Fault

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jinho; Muljadi, Eduard; Park, Jung-Wook; Kang, Yong Cheol

    2016-11-01

    This paper proposes an adaptive hierarchical voltage control scheme of a doubly-fed induction generator (DFIG)-based wind power plant (WPP) that can secure more reserve of reactive power (Q) in the WPP against a grid fault. To achieve this, each DFIG controller employs an adaptive reactive power to voltage (Q-V) characteristic. The proposed adaptive Q-V characteristic is temporally modified depending on the available Q capability of a DFIG; it is dependent on the distance from a DFIG to the point of common coupling (PCC). The proposed characteristic secures more Q reserve in the WPP than the fixed one. Furthermore, it allows DFIGs to promptly inject up to the Q limit, thereby improving the PCC voltage support. To avert an overvoltage after the fault clearance, washout filters are implemented in the WPP and DFIG controllers; they can prevent a surplus Q injection after the fault clearance by eliminating the accumulated values in the proportional-integral controllers of both controllers during the fault. Test results demonstrate that the scheme can improve the voltage support capability during the fault and suppress transient overvoltage after the fault clearance under scenarios of various system and fault conditions; therefore, it helps ensure grid resilience by supporting the voltage stability.

  8. A Hierarchical Algorithm for Integrated Scheduling and Control With Applications to Power Systems

    DEFF Research Database (Denmark)

    Sokoler, Leo Emil; Dinesen, Peter Juhler; Jørgensen, John Bagterp

    2016-01-01

    The contribution of this paper is a hierarchical algorithm for integrated scheduling and control via model predictive control of hybrid systems. The controlled system is a linear system composed of continuous control, state, and output variables. Binary variables occur as scheduling decisions...... portfolio case study show that the hierarchical algorithm reduces the computation to solve the OCP by several orders of magnitude. The improvement in computation time is achieved without a significant increase in the overall cost of operation....

  9. Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle

    DEFF Research Database (Denmark)

    Ghiasi, Mohammad Iman; Aliakbar Golkar, Masoud; Hajizadeh, Amin

    2016-01-01

    complexities and uncertainties in this kind of hybrid system, a hybrid supervisory control with an adaptive fuzzy sliding power control strategy is proposed to regulate the amount of requested fuel from a fuel cell power source to produce the electrical power and heat. Then, simulation results are used......This paper presents a hierarchical control strategy for heat and electric power control of a building integrating hybrid renewable power sources including photovoltaic, fuel cell and battery energy storage with Plug-in Electric Vehicles (PEV) in smart distribution systems. Because...... of the controllability of fuel cell power, this power sources plays the main role for providing heat and electric power to zero emission buildings. First, the power flow structure between hybrid power resources is described. To do so, all necessary electrical and thermal equations are investigated. Next, due to the many...

  10. Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle

    DEFF Research Database (Denmark)

    Ghiasi, Mohammad Iman; Aliakbar Golkar, Masoud; Hajizadeh, Amin

    2016-01-01

    This paper presents a hierarchical control strategy for heat and electric power control of a building integrating hybrid renewable power sources including photovoltaic, fuel cell and battery energy storage with Plug-in Electric Vehicles (PEV) in smart distribution systems. Because...... of the controllability of fuel cell power, this power sources plays the main role for providing heat and electric power to zero emission buildings. First, the power flow structure between hybrid power resources is described. To do so, all necessary electrical and thermal equations are investigated. Next, due to the many...... complexities and uncertainties in this kind of hybrid system, a hybrid supervisory control with an adaptive fuzzy sliding power control strategy is proposed to regulate the amount of requested fuel from a fuel cell power source to produce the electrical power and heat. Then, simulation results are used...

  11. Review of Active and Reactive Power Sharing Strategies in Hierarchical Controlled Microgrids

    DEFF Research Database (Denmark)

    Han, Yang; Li, Hong; Shen, Pan

    2017-01-01

    Microgrids consist of multiple parallel-connected distributed generation (DG) units with coordinated control strategies, which are able to operate in both grid-connected and islanded mode. Microgrids are attracting more and more attention since they can alleviate the stress of main transmission...... strategies are utilized as supplements of the conventional droop controls and virtual impedance methods. The improved hierarchical control approaches such as the algorithms based on graph theory, multi-agent system, the gain scheduling method and predictive control have been proposed to achieve proper...

  12. Hierarchical Control for Smart Grids

    DEFF Research Database (Denmark)

    Trangbæk, K; Bendtsen, Jan Dimon; Stoustrup, Jakob

    2011-01-01

    This paper deals with hierarchical model predictive control (MPC) of smart grid systems. The design consists of a high level MPC controller, a second level of so-called aggregators, which reduces the computational and communication-related load on the high-level control, and a lower level...... of autonomous consumers. The control system is tasked with balancing electric power production and consumption within the smart grid, and makes active use of the flexibility of a large number of power producing and/or power consuming units. The objective is to accommodate the load variation on the grid, arising...

  13. Active Power Quality Improvement Strategy for Grid-connected Microgrid Based on Hierarchical Control

    DEFF Research Database (Denmark)

    Wei, Feng; Sun, Kai; Guan, Yajuan

    2017-01-01

    When connected to a distorted grid utility, droop-controlled grid-connected microgrids (DCGC-MG) exhibit low equivalent impedance. The harmonic and unbalanced voltage at the point of common coupling (PCC) deteriorates the power quality of the grid-connected current (GCC) of DCGC-MG. This work...

  14. On Energy Efficient Hierarchical Cross-Layer Design: Joint Power Control and Routing for Ad Hoc Networks

    CERN Document Server

    Comaniciu, Cristina

    2007-01-01

    In this paper, a hierarchical cross-layer design approach is proposed to increase energy efficiency in ad hoc networks through joint adaptation of nodes' transmitting powers and route selection. The design maintains the advantages of the classic OSI model, while accounting for the cross-coupling between layers, through information sharing. The proposed joint power control and routing algorithm is shown to increase significantly the overall energy efficiency of the network, at the expense of a moderate increase in complexity. Performance enhancement of the joint design using multiuser detection is also investigated, and it is shown that the use of multiuser detection can increase the capacity of the ad hoc network significantly for a given level of energy consumption.

  15. On Energy-Efficient Hierarchical Cross-Layer Design: Joint Power Control and Routing for Ad Hoc Networks

    Directory of Open Access Journals (Sweden)

    Poor HVincent

    2007-01-01

    Full Text Available A hierarchical cross-layer design approach is proposed to increase energy efficiency in ad hoc networks through joint adaptation of nodes' transmitting powers and route selection. The design maintains the advantages of the classic OSI model, while accounting for the cross-coupling between layers, through information sharing. The proposed joint power control and routing algorithm is shown to increase significantly the overall energy efficiency of the network, at the expense of a moderate increase in complexity. Performance enhancement of the joint design using multiuser detection is also investigated, and it is shown that the use of multiuser detection can increase the capacity of the ad hoc network significantly for a given level of energy consumption.

  16. DC Hierarchical Control System for Microgrid Applications

    OpenAIRE

    Lu, Xiaonan; Sun, Kai; Guerrero, Josep M.; Huang, Lipei

    2013-01-01

    In order to enhance the DC side performance of AC-DC hybrid microgrid,a DC hierarchical control system is proposed in this paper.To meet the requirement of DC load sharing between the parallel power interfaces,droop method is adopted.Meanwhile,DC voltage secondary control is employed to restore the deviation in the DC bus voltage.The hierarchical control system is composed of two levels.DC voltage and AC current controllers are achieved in the primary control level.

  17. Frequency-Division Power Sharing and Hierarchical Control Design for DC Shipboard Microgrids with Hybrid Energy Storage Systems

    DEFF Research Database (Denmark)

    Jin, Zheming; Meng, Lexuan; Quintero, Juan Carlos Vasquez

    2017-01-01

    Due to the increasing need to reduce the cost and emission of ships, shipboard applications are calling advanced technologies to go onboard. Recently, cleaner power sources (i.e. gas turbines, fuel cell, solar and wind power), energy storage, advanced control and power/energy management are intro......Due to the increasing need to reduce the cost and emission of ships, shipboard applications are calling advanced technologies to go onboard. Recently, cleaner power sources (i.e. gas turbines, fuel cell, solar and wind power), energy storage, advanced control and power/energy management...... are introduced to meet the new requirement, and therefore, making shipboard power system more like a microgrid. In this paper, a frequency-division based power sharing method is proposed to solve the contradiction between fuel efficiency and dynamic load conditions of marine vessels. With effective design...

  18. Hierarchical control theory and power system automation research%分层递阶控制理论与电力系统自动化研究

    Institute of Scientific and Technical Information of China (English)

    冯进兵

    2012-01-01

      随着科学技术及电力设计的发展,电力系统的自动化水平日益提高,智能控制技术在电力系统中的应用越越来越深入。本文分析了分层递阶控制理论与电力系统智能化之间的联系,以及相似的理论与实践间的相互促进关系。并在电力控制系统中引入了仿人智能控制理论,分析了职能技术在电力自动化系统中的应用。%  with the development of science and technology and design of electric power development,power system automation level increasing,intel igent control technology and its application in power system is more and more thorough.This paper analyzes the hierarchical control theory and power system intel igent connection between theory and practice,as wel as the similarity of the mutual promotion relationship.And in the power control is introduced to the system of the imitation of human intel igent control theory,analysis the function of technology in electric power automation system application.

  19. Hierarchical Control for Multiple DC Microgrids Clusters

    DEFF Research Database (Denmark)

    Shafiee, Qobad; Dragicevic, Tomislav; Vasquez, Juan Carlos;

    2014-01-01

    This paper presents a distributed hierarchical control framework to ensure reliable operation of dc Microgrid (MG) clusters. In this hierarchy, primary control is used to regulate the common bus voltage inside each MG locally. An adaptive droop method is proposed for this level which determines....... Another distributed policy is employed then to regulate the power flow among the MGs according to their local SOCs. The proposed distributed controllers on each MG communicate with only the neighbor MGs through a communication infrastructure. Finally, the small signal model is expanded for dc MG clusters...

  20. Power Efficient Hierarchical Scheduling for DSP Transformations

    Directory of Open Access Journals (Sweden)

    P. K. Merakos

    2002-01-01

    Full Text Available In this paper, the problem of scheduling the computation of partial products in transformational Digital Signal Processing (DSP algorithms, aiming at the minimization of the switching activity in data and address buses, is addressed. The problem is stated as a hierarchical scheduling problem. Two different optimization algorithms, which are based on the Travelling Salesman Problem (TSP, are defined. The proposed optimization algorithms are independent on the target architecture and can be adapted to take into account it. Experimental results obtained from the application of the proposed algorithms in various widely used DSP transformations, like Discrete Cosine Transform (DCT and Discrete Fourier Transform (DFT, show that significant switching activity savings in data and address buses can be achieved, resulting in corresponding power savings. In addition, the differences between the two proposed methods are underlined, providing envisage for their suitable selection for implementation, in particular transformational algorithms and architectures.

  1. Hierarchical control of electron-transfer

    DEFF Research Database (Denmark)

    Westerhoff, Hans V.; Jensen, Peter Ruhdal; Egger, Louis;

    1997-01-01

    In this chapter the role of electron transfer in determining the behaviour of the ATP synthesising enzyme in E. coli is analysed. It is concluded that the latter enzyme lacks control because of special properties of the electron transfer components. These properties range from absence of a strong...... back pressure by the protonmotive force on the rate of electron transfer to hierarchical regulation of the expression of the gens that encode the electron transfer proteins as a response to changes in the bioenergetic properties of the cell.The discussion uses Hierarchical Control Analysis...

  2. Hierarchical Control of Thermostatically Controller Loads for Primary Frequency Control

    DEFF Research Database (Denmark)

    Zhao, Haoran; Wu, Qiuwei; Huang, Shaojun

    2016-01-01

    This paper proposes a hierarchical control of Thermostatically Controlled Loads (TCLs) to provide primary frequency control support. The control architecture is comprised of three levels. At the high level, an aggregator coordinates multiple distribution substations and dispatches the primary...... respond to the frequency event autonomously. Case studies show that the proposed controller can efficiently respond to frequency events and fulfill the requirement specified by the system operator. The users’ comforts are not compromised and the short cycling of TCLs is largely reduced. Due...

  3. Hierarchical Robot Control In A Multisensor Environment

    Science.gov (United States)

    Bhanu, Bir; Thune, Nils; Lee, Jih Kun; Thune, Mari

    1987-03-01

    Automatic recognition, inspection, manipulation and assembly of objects will be a common denominator in most of tomorrow's highly automated factories. These tasks will be handled by intelligent computer controlled robots with multisensor capabilities which contribute to desired flexibility and adaptability. The control of a robot in such a multisensor environment becomes of crucial importance as the complexity of the problem grows exponentially with the number of sensors, tasks, commands and objects. In this paper we present an approach which uses CAD (Computer-Aided Design) based geometric and functional models of objects together with action oriented neuroschemas to recognize and manipulate objects by a robot in a multisensor environment. The hierarchical robot control system is being implemented on a BBN Butterfly multi processor. Index terms: CAD, Hierarchical Control, Hypothesis Generation and Verification, Parallel Processing, Schemas

  4. A secure solution on hierarchical access control

    CERN Document Server

    Wei, Chuan-Sheng; Huang, Tone-Yau; Ong, Yao Lin

    2011-01-01

    Hierarchical access control is an important and traditional problem in information security. In 2001, Wu et.al. proposed an elegant solution for hierarchical access control by the secure-filter. Jeng and Wang presented an improvement of Wu et. al.'s method by the ECC cryptosystem. However, secure-filter method is insecure in dynaminc access control. Lie, Hsu and Tripathy, Paul pointed out some secure leaks on the secure-filter and presented some improvements to eliminate these secure flaws. In this paper, we revise the secure-filter in Jeng-Wang method and propose another secure solutions in hierarchical access control problem. CA is a super security class (user) in our proposed method and the secure-filter of $u_i$ in our solutions is a polynomial of degree $n_i+1$ in $\\mathbb{Z}_p^*$, $f_i(x)=(x-h_i)(x-a_1)...(x-a_{n_i})+L_{l_i}(K_i)$. Although the degree of our secure-filter is larger than others solutions, our solution is secure and efficient in dynamics access control.

  5. Hierarchical Communication Network Architectures for Offshore Wind Power Farms

    Directory of Open Access Journals (Sweden)

    Mohamed A. Ahmed

    2014-05-01

    Full Text Available Nowadays, large-scale wind power farms (WPFs bring new challenges for both electric systems and communication networks. Communication networks are an essential part of WPFs because they provide real-time control and monitoring of wind turbines from a remote location (local control center. However, different wind turbine applications have different requirements in terms of data volume, latency, bandwidth, QoS, etc. This paper proposes a hierarchical communication network architecture that consist of a turbine area network (TAN, farm area network (FAN, and control area network (CAN for offshore WPFs. The two types of offshore WPFs studied are small-scale WPFs close to the grid and medium-scale WPFs far from the grid. The wind turbines are modelled based on the logical nodes (LN concepts of the IEC 61400-25 standard. To keep pace with current developments in wind turbine technology, the network design takes into account the extension of the LNs for both the wind turbine foundation and meteorological measurements. The proposed hierarchical communication network is based on Switched Ethernet. Servers at the control center are used to store and process the data received from the WPF. The network architecture is modelled and evaluated via OPNET. We investigated the end-to-end (ETE delay for different WPF applications. The results are validated by comparing the amount of generated sensing data with that of received traffic at servers. The network performance is evaluated, analyzed and discussed in view of end-to-end (ETE delay for different link bandwidths.

  6. Power margin improvement for OFDMA-PON using hierarchical modulation.

    Science.gov (United States)

    Cao, Pan; Hu, Xiaofeng; Zhuang, Zhiming; Zhang, Liang; Chang, Qingjiang; Yang, Qi; Hu, Rong; Su, Yikai

    2013-04-08

    We propose and experimentally demonstrate a hierarchical modulation scheme to improve power margin for orthogonal frequency division multiple access-passive optical networks (OFDMA-PONs). In a PON system, under the same launched optical power, optical network units (ONUs) have different power margins due to unequal distribution fiber lengths. The power margin of the PON system is determined by the ONU with the lowest power margin. In our proposed scheme, ONUs with long and short distribution fibers are grouped together, and downstream signals for the paired ONUs are mapped onto the same OFDM subcarriers using hierarchical modulation. In a pair of ONUs, part of the power margin of the ONU with short distribution fiber is re-allocated to the ONU with long distribution fiber. Therefore, the power margin of the ONU with the longest distribution fiber can be increased, leading to the power margin improvement of the PON system. Experimental results show that the hierarchical modulation scheme improves the power margin by 2.7 dB for an OFDMA-PON system, which can be used to support more users or extend transmission distance.

  7. Hierarchical unilamellar vesicles of controlled compositional heterogeneity.

    Directory of Open Access Journals (Sweden)

    Maik Hadorn

    Full Text Available Eukaryotic life contains hierarchical vesicular architectures (i.e. organelles that are crucial for material production and trafficking, information storage and access, as well as energy production. In order to perform specific tasks, these compartments differ among each other in their membrane composition and their internal cargo and also differ from the cell membrane and the cytosol. Man-made structures that reproduce this nested architecture not only offer a deeper understanding of the functionalities and evolution of organelle-bearing eukaryotic life but also allow the engineering of novel biomimetic technologies. Here, we show the newly developed vesicle-in-water-in-oil emulsion transfer preparation technique to result in giant unilamellar vesicles internally compartmentalized by unilamellar vesicles of different membrane composition and internal cargo, i.e. hierarchical unilamellar vesicles of controlled compositional heterogeneity. The compartmentalized giant unilamellar vesicles were subsequently isolated by a separation step exploiting the heterogeneity of the membrane composition and the encapsulated cargo. Due to the controlled, efficient, and technically straightforward character of the new preparation technique, this study allows the hierarchical fabrication of compartmentalized giant unilamellar vesicles of controlled compositional heterogeneity and will ease the development of eukaryotic cell mimics that resemble their natural templates as well as the fabrication of novel multi-agent drug delivery systems for combination therapies and complex artificial microreactors.

  8. Hierarchical Model Predictive Control for Resource Distribution

    DEFF Research Database (Denmark)

    Bendtsen, Jan Dimon; Trangbæk, K; Stoustrup, Jakob

    2010-01-01

    This paper deals with hierarchichal model predictive control (MPC) of distributed systems. A three level hierachical approach is proposed, consisting of a high level MPC controller, a second level of so-called aggregators, controlled by an online MPC-like algorithm, and a lower level of autonomous...... facilitates plug-and-play addition of subsystems without redesign of any controllers. The method is supported by a number of simulations featuring a three-level smart-grid power control system for a small isolated power grid....

  9. Balancing the Power Consumption Speed in Flat and Hierarchical WSN

    Institute of Scientific and Technical Information of China (English)

    Hesham Abusaimeh; Shuang-Hua Yang

    2008-01-01

    A combination of a cluster tree routing protocol and an Ad hoc on demand vector (AODV) routing protocol is used in the latest ZigBee standard wireless sensor networks (WSNs) technology. However, the AODV routing protocol has no means by which to take into consideration the power consumption of the nodes during the routing process. Therefore, a new approach is proposed in this paper to balance the power consumption speed and to distribute the responsibilities of routing among fiat wireless sensor nodes and the three levels of hierarchical wireless sensor nodes. These three levels are based on the three types of devices, which are used in the ZigBee standard: the coordinator, the touters, and the end devices. In this paper, we have compared the original AODV routing protocol with our extension approach for the distribution of power consumption. Based on the simulation results, our new approach has achieved better performance in terms of increasing the lifetime of the fiat wireless sensor network, the personal area network (PAN)coordinator, the touters, and the whole network of the hierarchical wireless sensor network. Additionally, it has better performance in terms of distributing the power consumption among the key nodes of the wireless sensor network.

  10. 基于混合储能的并网光伏电站有功分级控制策略%Active Power Hierarchical Control Strategy of Interconnected Photovoltaic Station Based on Hybrid Energy Storage

    Institute of Scientific and Technical Information of China (English)

    鲍雪娜; 张建成; 徐明; 刘汉民

    2013-01-01

    针对自然条件下光伏电源有功出力的波动性,以超级电容器和磷酸铁锂电池组成的混合储能系统为基础,制定了有功分级控制策略.首先分析了光伏电站整体结构及混合储能装置的接入方式,然后考虑电网需求利用指数平滑法来实时更新光伏电站整体出力参考值,实现第1级控制.根据储能元件能量存储与功率吞吐特性,提出了以超级电容器为充放电主体的混合储能系统能量管理策略,实现第2级控制,并设计了脉宽调制的控制原理电路.编程计算结果证实了所述方法的有效性.%In view of the active power fluctuation of large capacity photovoltaic (PV) power systems, based on a hybrid energy storage system consisting of supercapacitors and lithium-ion ferrous phosphate batteries, an active power hierarchical control strategy is formulated to optimize the output power of PV source. First, the overall structure of photovoltaic power station and the way of accessing the hybrid energy storage system are analyzed. Then, by considering the power grid needs, the exponential smoothing method is used to real-time update the reference values of output power to realize the first level control. The energy management strategy is put forward according to the storage characteristics of energy storage components and power throughput so as to realize the second level control of the hybrid energy storage system. In addition, an energy management strategy is put forward with supercapacitors as the principal part of charge and discharge. Finally, a control circuit of pulse width modulation (PWM) is designed. Programming results demonstrate the effectiveness of the proposed method.

  11. Dynamic power flow controllers

    Science.gov (United States)

    Divan, Deepakraj M.; Prasai, Anish

    2017-03-07

    Dynamic power flow controllers are provided. A dynamic power flow controller may comprise a transformer and a power converter. The power converter is subject to low voltage stresses and not floated at line voltage. In addition, the power converter is rated at a fraction of the total power controlled. A dynamic power flow controller controls both the real and the reactive power flow between two AC sources having the same frequency. A dynamic power flow controller inserts a voltage with controllable magnitude and phase between two AC sources; thereby effecting control of active and reactive power flows between two AC sources.

  12. Hierarchical robust nonlinear switching control design for propulsion systems

    Science.gov (United States)

    Leonessa, Alexander

    1999-09-01

    The desire for developing an integrated control system- design methodology for advanced propulsion systems has led to significant activity in modeling and control of flow compression systems in recent years. In this dissertation we develop a novel hierarchical switching control framework for addressing the compressor aerodynamic instabilities of rotating stall and surge. The proposed control framework accounts for the coupling between higher-order modes while explicitly addressing actuator rate saturation constraints and system modeling uncertainty. To develop a hierarchical nonlinear switching control framework, first we develop generalized Lyapunov and invariant set theorems for nonlinear dynamical systems wherein all regularity assumptions on the Lyapunov function and the system dynamics are removed. In particular, local and global stability theorems are given using lower semicontinuous Lyapunov functions. Furthermore, generalized invariant set theorems are derived wherein system trajectories converge to a union of largest invariant sets contained in intersections over finite intervals of the closure of generalized Lyapunov level surfaces. The proposed results provide transparent generalizations to standard Lyapunov and invariant set theorems. Using the generalized Lyapunov and invariant set theorems, a nonlinear control-system design framework predicated on a hierarchical switching controller architecture parameterized over a set of moving system equilibria is developed. Specifically, using equilibria- dependent Lyapunov functions, a hierarchical nonlinear control strategy is developed that stabilizes a given nonlinear system by stabilizing a collection of nonlinear controlled subsystems. The switching nonlinear controller architecture is designed based on a generalized lower semicontinuous Lyapunov function obtained by minimizing a potential function over a given switching set induced by the parameterized system equilibria. The proposed framework provides a

  13. Hierarchical Control of Parallel AC-DC Converter Interfaces for Hybrid Microgrids

    DEFF Research Database (Denmark)

    Lu, Xiaonan; Guerrero, Josep M.; Sun, Kai;

    2014-01-01

    In this paper, a hierarchical control system for parallel power electronics interfaces between ac bus and dc bus in a hybrid microgrid is presented. Both standalone and grid-connected operation modes in the dc side of the microgrid are analyzed. Concretely, a three-level hierarchical control syst...... the three control levels is developed in order to adjust the main control parameters and study the system stability. Experimental results of a 2×2.2 kW parallel ac-dc converter system have shown satisfactory realization of the designed system.......In this paper, a hierarchical control system for parallel power electronics interfaces between ac bus and dc bus in a hybrid microgrid is presented. Both standalone and grid-connected operation modes in the dc side of the microgrid are analyzed. Concretely, a three-level hierarchical control system...... is implemented. In the primary control level, the decentralized control is realized by using the droop method. Local ac current proportional-resonant controller and dc voltage proportional-integral controller are employed. When the local load is connected to the dc bus, dc droop control is applied to obtain...

  14. Hierarchical Control of Droop-Controlled DC and AC Microgrids - A General Approach Towards Standardization

    DEFF Research Database (Denmark)

    Guerrero, Josep M.; Vásquez, Juan V.; Teodorescu, Remus

    2009-01-01

    DC and AC Microgrids are key elements to integrate renewable and distributed energy resources as well as distributed energy storage systems. In the last years, efforts toward the standardization of these Microgrids have been made. In this sense, this paper present the hierarchical control derived...... the deviations produced by the primary control; and iii) the tertiary control manage the power flow between the microgrid and the external electrical distribution system. Results from a hierarchicalcontrolled microgrid are provided to show the feasibility of the proposed approach....

  15. Distributed Power Flow Controller

    NARCIS (Netherlands)

    Yuan, Z.

    2010-01-01

    In modern power systems, there is a great demand to control the power flow actively. Power flow controlling devices (PFCDs) are required for such purpose, because the power flow over the lines is the nature result of the impedance of each line. Due to the control capabilities of different types of P

  16. Distributed Power Flow Controller

    NARCIS (Netherlands)

    Yuan, Z.

    2010-01-01

    In modern power systems, there is a great demand to control the power flow actively. Power flow controlling devices (PFCDs) are required for such purpose, because the power flow over the lines is the nature result of the impedance of each line. Due to the control capabilities of different types of P

  17. Power oscillation damping controller

    DEFF Research Database (Denmark)

    2012-01-01

    A power oscillation damping controller is provided for a power generation device such as a wind turbine device. The power oscillation damping controller receives an oscillation indicating signal indicative of a power oscillation in an electricity network and provides an oscillation damping control...

  18. Hierarchical Control for Multiple DC-Microgrids Clusters

    DEFF Research Database (Denmark)

    Shafiee, Qobad; Dragicevic, Tomislav; Vasquez, Juan Carlos

    2014-01-01

    DC microgrids (MGs) have gained research interest during the recent years because of many potential advantages as compared to the ac system. To ensure reliable operation of a low-voltage dc MG as well as its intelligent operation with the other DC MGs, a hierarchical control is proposed in this p......DC microgrids (MGs) have gained research interest during the recent years because of many potential advantages as compared to the ac system. To ensure reliable operation of a low-voltage dc MG as well as its intelligent operation with the other DC MGs, a hierarchical control is proposed...

  19. Power flow controller

    NARCIS (Netherlands)

    Ferreira, J.A.; Yuan, Z.; De Haan, S.W.H.

    2008-01-01

    The invention relates to a power flow controller, comprising at least one first converter coupled with a power transmission line, and at least one second converter coupled with a power source, wherein said power source operates at a predeter-mined first frequency and connects to the power transmissi

  20. Disturbance observer based hierarchical control of coaxial-rotor UAV.

    Science.gov (United States)

    Mokhtari, M Rida; Cherki, Brahim; Braham, Amal Choukchou

    2017-03-01

    This paper propose an hierarchical controller based on a new disturbance observer with finite time convergence (FTDO) to solve the path tracking of a small coaxial-rotor-typs Unmanned Aerial Vehicles (UAVs) despite of unknown aerodynamic efforts. The hierarchical control technique is used to separate the flight control problem into an inner loop that controls attitude and an outer loop that controls the thrust force acting on the vehicle. The new disturbance observer with finite time convergence is intergated to online estimate the unknown uncertainties and disturbances and to actively compensate them in finite time.The analysis further extends to the design of a control law that takes the disturbance estimation procedure into account. Numerical simulations are carried out to demonstrate the efficiency of the proposed control strategy.

  1. Exact Power Constraints in Smart Grid Control

    DEFF Research Database (Denmark)

    Trangbæk, K; Petersen, Mette Højgaard; Bendtsen, Jan Dimon

    2011-01-01

    This paper deals with hierarchical model predictive control (MPC) of smart grid systems. The objective is to accommodate load variations on the grid, arising from varying consumption and natural variations in the power production e.g. from wind turbines. This balancing between supply and demand...

  2. Hierarchical Process Control of Chemical Vapor Infiltration.

    Science.gov (United States)

    1995-05-31

    in these variables with reference to Figure 8. Conventional PID controllers are beneficially employed at this level in order to retain industry...to achieve minimum controlled-variable variations. PID controllers are beneficially employed at this level to retain industry standard functions useful

  3. Hierarchical Power Flow Control Strategy and Algorithm for Multi-terminal Interconnected AC/DC Distribution Network%多端互联交直流配电网的潮流分层控制策略及算法

    Institute of Scientific and Technical Information of China (English)

    彭克; 咸日常; 张新慧; 陈羽; 陆海

    2016-01-01

    随着直流配电系统的提出与发展,传统配电网的网架结构与运行方式正在逐渐改变,未来会形成交直流混联的配电网新型供电模式,交直流之间的电气量耦合给潮流的有序控制以及混联求解都带来了新的挑战。为此,提出了多端互联的交直流配电网分层潮流控制策略,实现交直流电压的有序控制。第一层控制由交直流互联的换流器实现,采用下垂控制均摊直流配电网内的负荷,并根据下垂曲线对直流母线电压进行控制。第二层控制由具有调压功能的分布式电源实现,维持就地电压平衡。第三层控制由电压调节器实现,进行区域电压调整。针对交直流配电网的特点,提出了高斯—牛顿交直流混合潮流算法,提高了算法的收敛性能。最后,在改进的 IEEE 123节点系统上进行了测试,验证了所述控制策略及算法的有效性与正确性。%With the development of DC distribution system , the network structure and operation mode of traditional distribution system have greatly changed . The AC/DC hybrid distribution network will be dominant in the future and poses a new challenge to power flow control and the AC/DC hybrid algorithm . For this reason , a hierarchical power flow control strategy is proposed to carry out orderly voltage control . At the first layer , DC load sharing is realized by the bidirectional converter with droop control , and DC bus voltage is controlled according to the droop control curve , at the second layer , local voltage balance is regulated by the distributed generator , while at the third , regional voltage is controlled by the voltage regulator . Secondly , the Gauss‐Newton hybrid algorithm is proposed according to the characteristics of the AC/DC hybrid distribution system to improve the convergence performance of the algorithm . Finally , the test results on a modified IEEE 123‐bus system show the validity and

  4. Nonlinear robust hierarchical control for nonlinear uncertain systems

    Directory of Open Access Journals (Sweden)

    Leonessa Alexander

    1999-01-01

    Full Text Available A nonlinear robust control-system design framework predicated on a hierarchical switching controller architecture parameterized over a set of moving nominal system equilibria is developed. Specifically, using equilibria-dependent Lyapunov functions, a hierarchical nonlinear robust control strategy is developed that robustly stabilizes a given nonlinear system over a prescribed range of system uncertainty by robustly stabilizing a collection of nonlinear controlled uncertain subsystems. The robust switching nonlinear controller architecture is designed based on a generalized (lower semicontinuous Lyapunov function obtained by minimizing a potential function over a given switching set induced by the parameterized nominal system equilibria. The proposed framework robustly stabilizes a compact positively invariant set of a given nonlinear uncertain dynamical system with structured parametric uncertainty. Finally, the efficacy of the proposed approach is demonstrated on a jet engine propulsion control problem with uncertain pressure-flow map data.

  5. Hierarchical Control Strategy for the Cooperative Braking System of Electric Vehicle.

    Science.gov (United States)

    Peng, Jiankun; He, Hongwen; Liu, Wei; Guo, Hongqiang

    2015-01-01

    This paper provides a hierarchical control strategy for cooperative braking system of an electric vehicle with separated driven axles. Two layers are defined: the top layer is used to optimize the braking stability based on two sliding mode control strategies, namely, the interaxle control mode and signal-axle control strategies; the interaxle control strategy generates the ideal braking force distribution in general braking condition, and the single-axle control strategy can ensure braking safety in emergency braking condition; the bottom layer is used to maximize the regenerative braking energy recovery efficiency with a reallocated braking torque strategy; the reallocated braking torque strategy can recovery braking energy as much as possible in the premise of meeting battery charging power. The simulation results show that the proposed hierarchical control strategy is reasonable and can adapt to different typical road surfaces and load cases; the vehicle braking stability and safety can be guaranteed; furthermore, the regenerative braking energy recovery efficiency can be improved.

  6. Flexible System Integration and Advanced Hierarchical Control Architectures in the Microgrid Research Laboratory of Aalborg University

    DEFF Research Database (Denmark)

    Meng, Lexuan; Hernández, Adriana Carolina Luna; Diaz, Enrique Rodriguez

    2016-01-01

    This paper presents the system integration and hierarchical control implementation in an inverter-based microgrid research laboratory (MGRL) in Aalborg University, Denmark. MGRL aims to provide a flexible experimental platform for comprehensive studies of microgrids. The structure of the laboratory...... system supervision, advanced secondary and tertiary management are realized in a microgrid central controller. The software and hardware schemes are described. Several example case studies are introduced and performed in order to achieve power quality regulation, energy management and flywheel energy...

  7. Study on Hierarchical Structure of Detailed Control Planning

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Using case studies,this paper analyzes the characteristics of detailed control planning and its hierarchical controls,the form and composition of plan content,and methodological innovations.It then suggests improvements to the planning structure that are oriented at adaptability,fairness,centrality,and scientific principles with regard to the content,methods,and results of the planning.Regarding the hierarchical control system,the paper suggests that the detailed control plan should be composed of "block planning" and "plot planning".It is believed that through a combination of block and plot planning,the problem of joining long-term and short-term planning will be solved and it will be possible to address the need for adjustment and revision of detailed control plan.

  8. MULTILEVEL RECURRENT MODEL FOR HIERARCHICAL CONTROL OF COMPLEX REGIONAL SECURITY

    Directory of Open Access Journals (Sweden)

    Andrey V. Masloboev

    2014-11-01

    Full Text Available Subject of research. The research goal and scope are development of methods and software for mathematical and computer modeling of the regional security information support systems as multilevel hierarchical systems. Such systems are characterized by loosely formalization, multiple-aspect of descendent system processes and their interconnectivity, high level dynamics and uncertainty. The research methodology is based on functional-target approach and principles of multilevel hierarchical system theory. The work considers analysis and structural-algorithmic synthesis problem-solving of the multilevel computer-aided systems intended for management and decision-making information support in the field of regional security. Main results. A hierarchical control multilevel model of regional socio-economic system complex security has been developed. The model is based on functional-target approach and provides both formal statement and solving, and practical implementation of the automated information system structure and control algorithms synthesis problems of regional security management optimal in terms of specified criteria. An approach for intralevel and interlevel coordination problem-solving in the multilevel hierarchical systems has been proposed on the basis of model application. The coordination is provided at the expense of interconnection requirements satisfaction between the functioning quality indexes (objective functions, which are optimized by the different elements of multilevel systems. That gives the possibility for sufficient coherence reaching of the local decisions, being made on the different control levels, under decentralized decision-making and external environment high dynamics. Recurrent model application provides security control mathematical models formation of regional socioeconomic systems, functioning under uncertainty. Practical relevance. The model implementation makes it possible to automate synthesis realization of

  9. Hierarchical Control for Voltage Harmonics Compensation in Multi-Area Microgrids

    DEFF Research Database (Denmark)

    Hashempour, Mohammad M.; Firoozabadi, Mehdi Savaghebi; Quintero, Juan Carlos Vasquez

    2015-01-01

    is proposed. Hierarchical control is applied to control DGs inverters and APFs in a coordinated way. Primary control consists of power droop controller of DGs, selective virtual impedance and voltage/current regulators. Based on the secondary control, voltage compensation of Points of Common Coupling (PCCs......) of multi-area microgrid is carried out by DGs. Voltage compensation of PCCs by DGs may cause violation from maximum allowable voltage distortion at DGs terminals. Thus, tertiary control is used to mitigate these violations by using APF in proper coordination with secondary control. Evaluation...

  10. Hierarchical Control of the ATLAS Experiment

    CERN Document Server

    Barriuso-Poy, Alex; Llobet-Valero, E

    2007-01-01

    Control systems at High Energy Physics (HEP) experiments are becoming increasingly complex mainly due to the size, complexity and data volume associated to the front-end instrumentation. In particular, this becomes visible for the ATLAS experiment at the LHC accelerator at CERN. ATLAS will be the largest particle detector ever built, result of an international collaboration of more than 150 institutes. The experiment is composed of 9 different specialized sub-detectors that perform different tasks and have different requirements for operation. The system in charge of the safe and coherent operation of the whole experiment is called Detector Control System (DCS). This thesis presents the integration of the ATLAS DCS into a global control tree following the natural segmentation of the experiment into sub-detectors and smaller sub-systems. The integration of the many different systems composing the DCS includes issues such as: back-end organization, process model identification, fault detection, synchronization ...

  11. Hierarchical Control of the ATLAS Experiment

    CERN Document Server

    Barriuso-Poy, Alex; Llobet-Valero, E

    2007-01-01

    Control systems at High Energy Physics (HEP) experiments are becoming increasingly complex mainly due to the size, complexity and data volume associated to the front-end instrumentation. In particular, this becomes visible for the ATLAS experiment at the LHC accelerator at CERN. ATLAS will be the largest particle detector ever built, result of an international collaboration of more than 150 institutes. The experiment is composed of 9 different specialized sub-detectors that perform different tasks and have different requirements for operation. The system in charge of the safe and coherent operation of the whole experiment is called Detector Control System (DCS). This thesis presents the integration of the ATLAS DCS into a global control tree following the natural segmentation of the experiment into sub-detectors and smaller sub-systems. The integration of the many different systems composing the DCS includes issues such as: back-end organization, process model identification, fault detection, synchronization ...

  12. Controlling the wettability of hierarchically structured thermoplastics.

    Science.gov (United States)

    Cortese, Barbara; Morgan, Hywel

    2012-01-10

    Surfaces play an important role in defining the properties of materials, controlling wetting, adsorption, or desorption of biomolecules, and sealing/bonding of different materials. We have combined microscale features with plasma-etched nanoscale roughness and chemical modification to tailor the wettability of the substrates. Cyclic olefin polymers and copolymers (COPs/COCs) were processed to make a range of surfaces with controlled superhydrophobic or -hydrophilic properties. The hydrophobic properties of the polymers were increased by the introduction of microstructures of varying geometry and spacing through hot embossing. The COC/COP substrates were functionalized by plasma activation in O(2), CF(4), and a mixture of both gases. The plasma etching introduces nanoscale roughness and also chemically modifies the surface, creating either highly hydrophilic or highly hydrophobic (contact angle >150°) surfaces depending on the gas mixture. The influence of geometry and chemistries was characterized by atomic force microscopy, contact angle measurements, and X-ray photoelectron spectroscopy. Measurements of the contact angle and contact angle hysteresis demonstrated long-term stability of the superhydrophobic/superhydrophilic characteristics (>6 months).

  13. A multi-mode operation control strategy for flexible microgrid based on sliding-mode direct voltage and hierarchical controls.

    Science.gov (United States)

    Zhang, Qinjin; Liu, Yancheng; Zhao, Youtao; Wang, Ning

    2016-03-01

    Multi-mode operation and transient stability are two problems that significantly affect flexible microgrid (MG). This paper proposes a multi-mode operation control strategy for flexible MG based on a three-layer hierarchical structure. The proposed structure is composed of autonomous, cooperative, and scheduling controllers. Autonomous controller is utilized to control the performance of the single micro-source inverter. An adaptive sliding-mode direct voltage loop and an improved droop power loop based on virtual negative impedance are presented respectively to enhance the system disturbance-rejection performance and the power sharing accuracy. Cooperative controller, which is composed of secondary voltage/frequency control and phase synchronization control, is designed to eliminate the voltage/frequency deviations produced by the autonomous controller and prepare for grid connection. Scheduling controller manages the power flow between the MG and the grid. The MG with the improved hierarchical control scheme can achieve seamless transitions from islanded to grid-connected mode and have a good transient performance. In addition the presented work can also optimize the power quality issues and improve the load power sharing accuracy between parallel VSIs. Finally, the transient performance and effectiveness of the proposed control scheme are evaluated by theoretical analysis and simulation results.

  14. Hierarchical cooperative control for multiagent systems with switching directed topologies.

    Science.gov (United States)

    Hu, Jianqiang; Cao, Jinde

    2015-10-01

    The hierarchical cooperative control problem is concerned for a two-layer networked multiagent system under switching directed topologies. The group cooperative objective is to achieve finite-time formation control for the upper layer of leaders and containment control for the lower layer of followers. Two kinds of cooperative strategies, including centralized-distributed control and distributed-distributed control, are proposed for two types of switching laws: 1) random switching law with the dwell time and 2) Markov switching law with stationary distribution. Utilizing the state transition matrix methods and matrix measure techniques, some sufficient conditions are derived for asymptotical containment control and exponential almost sure containment control, respectively. Finally, some numerical examples are provided to demonstrate the effectiveness of the proposed control schemes.

  15. Hierarchical control based on Hopfield network for nonseparable optimization problems

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The nonseparable optimization control problem is considered, where the overall objective function is not of an additive form with respect to subsystems. Since there exists the problem that computation is very slow when using iterative algorithms in multiobjective optimization, Hopfield optimization hierarchical network based on IPM is presented to overcome such slow computation difficulty. Asymptotic stability of this Hopfield network is proved and its equilibrium point is the optimal point of the original problem. The simulation shows that the net is effective to deal with the optimization control problem for large-scale nonseparable steady state systems.

  16. Agent-based distributed hierarchical control of dc microgrid systems

    DEFF Research Database (Denmark)

    Meng, Lexuan; Vasquez, Juan Carlos; Guerrero, Josep M.

    2014-01-01

    In order to enable distributed control and management for microgrids, this paper explores the application of information consensus and local decisionmaking methods formulating an agent based distributed hierarchical control system. A droop controlled paralleled DC/DC converter system is taken...... as a case study. The objective is to enhance the system efficiency by finding the optimal sharing ratio of load current. Virtual resistances in local control systems are taken as decision variables. Consensus algorithms are applied for global information discovery and local control systems coordination....... Standard genetic algorithm is applied in each local control system in order to search for a global optimum. Hardware-in-Loop simulation results are shown to demonstrate the effectiveness of the method....

  17. Hierarchical Control for Optimal and Distributed Operation of Microgrid Systems

    DEFF Research Database (Denmark)

    Meng, Lexuan

    of the underlying communication features (sampling time, topology, parameters, etc.). System dynamics and sensitivity analysis are conducted based on the proposed model. A MG central controller is also developed based on the experimental system in the intelligent MG lab in Aalborg University for providing...... are also conducted in order to ensure safe operation during the optimization procedure. In addition, as the secondary and tertiary controls require global information to perform the functions, they are usually implemented in centralized fashion. In this sense the communication links are required from...... the central unit to each local unit, a single point of failure in the central controller may jerpodize the safety of the whole system, and the flexibility of the system is limited. Consequently, this project proposes the application of dynamic consensus algorithm (DCA) into existing hierarchical control...

  18. Hierarchical Model Predictive Control for Plug-and-Play Resource Distribution

    DEFF Research Database (Denmark)

    Bendtsen, Jan Dimon; Trangbæk, K; Stoustrup, Jakob

    2012-01-01

    This chapter deals with hierarchical model predictive control (MPC) of distributed systems. A three level hierarchical approach is proposed, consisting of a high level MPC controller, a second level of so-called aggregators, controlled by an online MPC-like algorithm, and a lower level of autonom......This chapter deals with hierarchical model predictive control (MPC) of distributed systems. A three level hierarchical approach is proposed, consisting of a high level MPC controller, a second level of so-called aggregators, controlled by an online MPC-like algorithm, and a lower level...

  19. Oilwell Power Controller (OPC)

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    The Oil Well Power Controller (OPC) prototype units is nearing completion. This device is an oilwell beam pump controller and data logger. Applications for this device have been for an electrical power saving device, pump off control, parafffin detection, demand power load control, chemical treatment data, dynamometer and pump efficiency data. Preliminary results appear vary promising. A total of ten OPC rod pump controllers were assembled and installed on oilwells in several areas of Central and Western United States. Data was analyzed on these wells and forwarded to the participating oil companies. Cost savings on each individual oil well participating in the OPC testing vary considerably, savings on some situations have been outstanding. In situations where the pump efficiency was determined to be low, the cost savings have been considerable. Cost savings due to preventive maintenance are also present, but are difficult to pin point an exact dollar amount at the present time. A break out of actual cost data obtained on some of the oilwells controlled and monitored with the oilwell power controller.

  20. Controlled Synthesis and Magnetic Properties of Uniform Hierarchical Polyhedral α-Fe2O3 Particles

    Science.gov (United States)

    Long, Nguyen Viet; Yang, Yong; Thi, Cao Minh; Phuc, Le Hong; Nogami, Masayuki

    2017-02-01

    The controlled synthesis of uniform hierarchical polyhedral iron (Fe) micro-/nanoscale oxide particles with the α-Fe2O3 structure is presented. The hierarchical polyhedral iron oxide particles were synthesized by modified polyol methods with sodium borohydride as a powerful and efficient reducing agent. A critical heat treatment process used during the synthesis allowed for the interesting formation of α-Fe2O3 hematite with a micro-/nanoscale structure. The structure and weak ferromagnetism of the α-Fe2O3 particles were investigated by x-ray diffraction with whole pattern fitting and Rietveld refinement, scanning electron microscopy, and by vibrating sample magnetometry. The as-prepared α-Fe2O3 particles and the three dimensional models presented have promising practical applications for energy storage and conversion in batteries, capacitors, and fuel cells, and related spintronic devices and technologies.

  1. Fuzzy/Kalman Hierarchical Horizontal Motion Control of Underactuated ROVs

    Directory of Open Access Journals (Sweden)

    Francesco M. Raimondi

    2010-09-01

    Full Text Available A new closed loop fuzzy motion control system including on-line Kalman's filter (KF for the two dimensional motion of underactuated and underwater Remotely Operated Vehicle (ROV is presented. Since the sway force is unactuated, new continuous and discrete time models are developed using a polar transformation. A new hierarchical control architecture is developed, where the high level fuzzy guidance controller generates the surge speed and the yaw rate needed to achieve the objective of planar motion, while the low level controller gives the thruster surge force and the yaw control signals. The Fuzzy controller ensures robustness with respect to uncertainties due to the marine environment, forward surge speed and saturation of the control signals. Also Lyapunov's stability of the motion errors is proved based on the properties of the fuzzy maps. If Inertial Measurement Unit data (IMU is employed for the feedback directly, aleatory noises due to accelerometers and gyros damage the performances of the motion control. These noises denote a king of non parametric uncertainty which perturbs the model of the ROV. Therefore a KF is inserted in the feedback of the control system to compensate for the above uncertainties and estimate the feedback signals with more precision.

  2. Fuzzy/Kalman Hierarchical Horizontal Motion Control of Underactuated ROVs

    Directory of Open Access Journals (Sweden)

    Francesco M. Raimondi

    2010-06-01

    Full Text Available A new closed loop fuzzy motion control system including on-line Kalman's filter (KF for the two dimensional motion of underactuated and underwater Remotely Operated Vehicle (ROV is presented. Since the sway force is unactuated, new continuous and discrete time models are developed using a polar transformation. A new hierarchical control architecture is developed, where the high level fuzzy guidance controller generates the surge speed and the yaw rate needed to achieve the objective of planar motion, while the low level controller gives the thruster surge force and the yaw torque control signals. The Fuzzy controller ensures robustness with respect to uncertainties due to the marine environment, forward surge speed and saturation of the control signals. Also Lyapunov's stability of the motion errors is proved based on the properties of the fuzzy maps. If Inertial Measurement Unit data (IMU is employed for the feedback directly, aleatory noises due to accelerometers and gyros damage the performances of the motion control. These noises denote a kind of non parametric uncertainty which perturbs the model of the ROV. Therefore a KF is inserted in the feedback of the control system to compensate for the above uncertainties and estimate the feedback signals with more precision.

  3. Power, control and optimization

    CERN Document Server

    Vasant, Pandian; Barsoum, Nader

    2013-01-01

    The book consists of chapters based on selected papers of international conference „Power, Control and Optimization 2012”, held in Las Vegas, USA. Readers can find interesting chapters discussing various topics from the field of power control, its distribution and related fields. Book discusses topics like energy consumption impacted by climate, mathematical modeling of the influence of thermal power plant on the aquatic environment, investigation of cost reduction in residential electricity bill using electric vehicle at peak times or allocation and size evaluation of distributed generation using ANN model and others.  Chapter authors are to the best of our knowledge the originators or closely related to the originators of presented ideas and its applications. Hence, this book certainly is one of the few books discussing the benefit from intersection of those modern and fruitful scientific fields of research with very tight and deep impact on real life and industry. This book is devoted to the studies o...

  4. Correction: β-Sialon nanowires, nanobelts and hierarchical nanostructures: morphology control, growth mechanism and cathodoluminescence properties

    Science.gov (United States)

    Huang, Juntong; Huang, Zhaohui; Liu, Yangai; Fang, Minghao; Chen, Kai; Huang, Yaoting; Huang, Saifang; Ji, Haipeng; Yang, Jingzhou; Wu, Xiaowen; Zhang, Shaowei

    2016-07-01

    Correction for `β-Sialon nanowires, nanobelts and hierarchical nanostructures: morphology control, growth mechanism and cathodoluminescence properties' by Juntong Huang, et al., Nanoscale, 2014, 6, 424-432.

  5. Frequency Stability of Hierarchically Controlled Hybrid Photovoltaic-Battery-Hydropower Microgrids

    DEFF Research Database (Denmark)

    Guan, Yajuan; Quintero, Juan Carlos Vasquez; Guerrero, Josep M.;

    2015-01-01

    Hybrid photovoltaic (PV) -battery-hydropower microgrids can be considered to enhance electricity accessibility and availability in remote areas. However, the coexistence of different renewable energy sources with different inertias and control strategies may affect system stability. In this paper......, a hierarchical controller for hybrid PV-battery-hydropower microgrid is proposed in order to achieve the parallel operation of hydropower and PV-battery system with different rates, and to guarantee power sharing performance among PV voltage controlled inverters, while the required power to hydropower...... is derived to analyze the system stability of the hybrid microgrid. The simulation results show system frequency and voltage stability for a hybrid microgrid demonstration which includes 2 MWp PV installations, a 15.2 MWh battery system, and a 12.8 MVA hydropower plant. Experimental results on a small...

  6. Hierarchical control framework for integrated coordination between distributed energy resources and demand response

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Di; Lian, Jianming; Sun, Yannan; Yang, Tao; Hansen, Jacob

    2017-09-01

    Demand response is representing a significant but largely untapped resource that can greatly enhance the flexibility and reliability of power systems. In this paper, a hierarchical control framework is proposed to facilitate the integrated coordination between distributed energy resources and demand response. The proposed framework consists of coordination and device layers. In the coordination layer, various resource aggregations are optimally coordinated in a distributed manner to achieve the system-level objectives. In the device layer, individual resources are controlled in real time to follow the optimal power generation or consumption dispatched from the coordination layer. For the purpose of practical applications, a method is presented to determine the utility functions of controllable loads by taking into account the real-time load dynamics and the preferences of individual customers. The effectiveness of the proposed framework is validated by detailed simulation studies.

  7. Hierarchical Control Scheme for Improving Transient Voltage Recovery of a DFIG-Based WPP

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jinho; Muljadi, Eduard; Kang, Yong Cheol

    2015-06-05

    Modern grid codes require that wind power plants (WPPs) inject reactive power according to the voltage dip at a point of interconnection (POI). This requirement helps to support a POI voltage during a fault. However, if a fault is cleared, the POI and wind turbine generator (WTG) voltages are likely to exceed acceptable levels unless the WPP reduces the injected reactive power quickly. This might deteriorate the stability of a grid by allowing the disconnection of WTGs to avoid any damage. This paper proposes a hierarchical control scheme of a doubly-fed induction generator (DFIG)-based WPP. The proposed scheme aims to improve the reactive power injecting capability during the fault and suppress the overvoltage after the fault clearance. To achieve the former, an adaptive reactive power-to-voltage scheme is implemented in each DFIG controller so that a DFIG with a larger reactive power capability will inject more reactive power. To achieve the latter, a washout filter is used to capture a high frequency component contained in the WPP voltage, which is used to remove the accumulated values in the proportional-integral controllers. Test results indicate that the scheme successfully supports the grid voltage during the fault, and recovers WPP voltages without exceeding the limit after the fault clearance.

  8. Design And Analysis Of Low Power Hierarchical Decoder

    Directory of Open Access Journals (Sweden)

    Abhinav Singh

    2012-11-01

    Full Text Available Due to the high degree of miniaturization possible today in semiconductor technology, the size and complexity of designs that may be implemented in hardware has increased dramatically. Process scaling has been used in the miniaturization process to reduce the area needed for logic functions in an effort to lower the product costs. Precharged Complementary Metal Oxide Semiconductor (CMOS domino logic techniques may be applied to functional blocks to reduce power. Domino logic forms an attractive design style for high performance designs since its low switching threshold and reduced transistor count leads to fast and area efficient circuit implementations. In this paper all the necessary components required to form a 5-to-32 bit decoder using domino logic are designed to perform different analysis at 180nm & 350 nm technologies. Decoderimplemented through domino logic is compared to static decoder.

  9. Indirect Control and Power

    Directory of Open Access Journals (Sweden)

    Cesarino Bertini

    2016-01-01

    Full Text Available To determine who has the power within a stock corporate company can be a quite complex problem, especially when control is achieved through alliances between shareholders. This problem arises especially in cases of indirect control of corporations, that is, in situations involving shareholders and companies with cross-shareholdings. The first to solve the problem of measuring power in the case of indirect share control were Gianfranco Gambarelli and Guillermo Owen in [10]. In the following years, numerous other models were introduced. In this paper, we critically examine the models of: Gambarelli and Owen, Denti and Prati, Crama and Leruth, Karos and Peters, as well as Mercik and Lobos, taking into account two well-known, illustrative examples, one with an acyclic corporate structure and the other with a cyclic structure. (original abstract

  10. Hierarchical Control Strategy for the Cooperative Braking System of Electric Vehicle

    Science.gov (United States)

    Peng, Jiankun; He, Hongwen; Guo, Hongqiang

    2015-01-01

    This paper provides a hierarchical control strategy for cooperative braking system of an electric vehicle with separated driven axles. Two layers are defined: the top layer is used to optimize the braking stability based on two sliding mode control strategies, namely, the interaxle control mode and signal-axle control strategies; the interaxle control strategy generates the ideal braking force distribution in general braking condition, and the single-axle control strategy can ensure braking safety in emergency braking condition; the bottom layer is used to maximize the regenerative braking energy recovery efficiency with a reallocated braking torque strategy; the reallocated braking torque strategy can recovery braking energy as much as possible in the premise of meeting battery charging power. The simulation results show that the proposed hierarchical control strategy is reasonable and can adapt to different typical road surfaces and load cases; the vehicle braking stability and safety can be guaranteed; furthermore, the regenerative braking energy recovery efficiency can be improved. PMID:26236772

  11. Hierarchical Control Strategy for the Cooperative Braking System of Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Jiankun Peng

    2015-01-01

    Full Text Available This paper provides a hierarchical control strategy for cooperative braking system of an electric vehicle with separated driven axles. Two layers are defined: the top layer is used to optimize the braking stability based on two sliding mode control strategies, namely, the interaxle control mode and signal-axle control strategies; the interaxle control strategy generates the ideal braking force distribution in general braking condition, and the single-axle control strategy can ensure braking safety in emergency braking condition; the bottom layer is used to maximize the regenerative braking energy recovery efficiency with a reallocated braking torque strategy; the reallocated braking torque strategy can recovery braking energy as much as possible in the premise of meeting battery charging power. The simulation results show that the proposed hierarchical control strategy is reasonable and can adapt to different typical road surfaces and load cases; the vehicle braking stability and safety can be guaranteed; furthermore, the regenerative braking energy recovery efficiency can be improved.

  12. Stirling engine power control

    Science.gov (United States)

    Fraser, James P.

    1983-01-01

    A power control method and apparatus for a Stirling engine including a valved duct connected to the junction of the regenerator and the cooler and running to a bypass chamber connected between the heater and the cylinder. An oscillating zone of demarcation between the hot and cold portions of the working gas is established in the bypass chamber, and the engine pistons and cylinders can run cold.

  13. A Fuzzy Logic Based Supervisory Hierarchical Control Scheme for Real Time Pressure Control

    Institute of Scientific and Technical Information of China (English)

    N.Kanagaraj; P.Sivashanmugam; S.Paramasivam

    2009-01-01

    This paper describes a supervisory hierarchical fuzzy controller (SHFC) for regulating pressure in a real-time pilot pressure control system.The input scaling factor tuning of a direct expert controller is made using the error and process input parameters in a closed loop system in order to obtain better controller performance for set-point change and load disturbances.This on-line tuning method reduces operator involvement and enhances the controller performance to a wide operating range.The hierarchical control scheme consists of an intelligent upper level supervisory fuzzy controller and a lower level direct fuzzy controller.The upper level controller provides a mechanism to the main goal of the system and the lower level controller delivers the solutions to a particular situation. The control algorithm for the proposed scheme has been developed and tested using an ARM7 microcontroller-based embedded target board for a nonlinear pressure process having dead time.To demonstrate the effectiveness,the results of the proposed hierarchical controller,fuzzy controller and conventional proportional-integral (PI) controller are analyzed.The results prove that the SHFC performance is better in terms of stability and robustness than the conventional control methods.

  14. Hierarchical control of motor units in voluntary contractions.

    Science.gov (United States)

    De Luca, Carlo J; Contessa, Paola

    2012-01-01

    For the past five decades there has been wide acceptance of a relationship between the firing rate of motor units and the afterhyperpolarization of motoneurons. It has been promulgated that the higher-threshold, larger-soma, motoneurons fire faster than the lower-threshold, smaller-soma, motor units. This relationship was based on studies on anesthetized cats with electrically stimulated motoneurons. We questioned its applicability to motor unit control during voluntary contractions in humans. We found that during linearly force-increasing contractions, firing rates increased as exponential functions. At any time and force level, including at recruitment, the firing rate values were inversely related to the recruitment threshold of the motor unit. The time constants of the exponential functions were directly related to the recruitment threshold. From the Henneman size principle it follows that the characteristics of the firing rates are also related to the size of the soma. The "firing rate spectrum" presents a beautifully simple control scheme in which, at any given time or force, the firing rate value of earlier-recruited motor units is greater than that of later-recruited motor units. This hierarchical control scheme describes a mechanism that provides an effective economy of force generation for the earlier-recruited lower force-twitch motor units, and reduces the fatigue of later-recruited higher force-twitch motor units-both characteristics being well suited for generating and sustaining force during the fight-or-flight response.

  15. NEW METHOD TO ESTIMATE SCALING OF POWER-LAW DEGREE DISTRIBUTION AND HIERARCHICAL NETWORKS

    Institute of Scientific and Technical Information of China (English)

    YANG Bo; DUAN Wen-qi; CHEN Zhong

    2006-01-01

    A new method and corresponding numerical procedure are introduced to estimate scaling exponents of power-law degree distribution and hierarchical clustering func tion for complex networks. This method can overcome the biased and inaccurate faults of graphical linear fitting methods commonly used in current network research. Furthermore, it is verified to have higher goodness-of-fit than graphical methods by comparing the KS (Kolmogorov-Smirnov) test statistics for 10 CNN (Connecting Nearest-Neighbor)networks.

  16. Exact Power Constraints in Smart Grid Control

    DEFF Research Database (Denmark)

    Trangbæk, K; Petersen, Mette Højgaard; Bendtsen, Jan Dimon

    2011-01-01

    This paper deals with hierarchical model predictive control (MPC) of smart grid systems. The objective is to accommodate load variations on the grid, arising from varying consumption and natural variations in the power production e.g. from wind turbines. This balancing between supply and demand...... is performed by distributing power to consumers in an optimal manner, subject to the requirement that each consumer receives the specific amount of energy the consumer is entitled to within a specific time horizon. However, in order to do so, the high-level controller requires knowledge of how much energy...... consumer models. The example illustrates that the exact bounds computed by the proposed method leads to a better power distribution than a conventional, conservative approach in case of fast changes in the load....

  17. Resilient control of cyber-physical systems against intelligent attacker: a hierarchal stackelberg game approach

    Science.gov (United States)

    Yuan, Yuan; Sun, Fuchun; Liu, Huaping

    2016-07-01

    This paper is concerned with the resilient control under denial-of-service attack launched by the intelligent attacker. The resilient control system is modelled as a multi-stage hierarchical game with a corresponding hierarchy of decisions made at cyber and physical layer, respectively. Specifically, the interaction in the cyber layer between different security agents is modelled as a static infinite Stackelberg game, while in the underlying physical layer the full-information H∞ minimax control with package drops is modelled as a different Stackelberg game. Both games are solved sequentially, which is consistent with the actual situations. Finally, the proposed method is applied to the load frequency control of the power system, which demonstrates its effectiveness.

  18. Hierarchical Control Scheme for Voltage Unbalance Compensation in Islanded Microgrids

    DEFF Research Database (Denmark)

    Savaghebi, Mehdi; Guerrero, Josep M.; Jalilian, Alireza;

    2011-01-01

    active and reactive power controllers, virtual impedance loop and voltage and current controllers. The secondary level is designed to compensate the voltage unbalance at the load bus (LB) of the islanded microgrid. Also, restoration of LB voltage amplitude and microgrid frequency to the rated values...... is considered in the secondary level. These functions are achieved by proper control of distributed generators (DGs) interface converters. The presented simulation results show the effectiveness of the proposed control structure in compensating the voltage unbalance and restoring the voltage amplitude...

  19. Controlled Growth of a Hierarchical Nickel Carbide "Dandelion" Nanostructure.

    Science.gov (United States)

    Qiao, Liang; Zhao, Wenxia; Qin, Yueling; Swihart, Mark T

    2016-07-01

    We present a new type of highly hierarchical but nonporous nanostructure with a unique "dandelion" morphology. Based on the time evolution of these Ni3 C nanostructures, we suggest a mechanism for their formation. This type of hierarchical nanocrystal, with high accessible specific surface area in a relatively large (ca. 750 nm overall diameter) stable structure, can be valuable in catalysis and related applications.

  20. Hierarchical algorithms of functional modelling for solution of optimal operation problems in electrical power systems

    Energy Technology Data Exchange (ETDEWEB)

    Makeechev, V.A. [Industrial Power Company, Krasnopresnenskaya Naberejnaya 12, 123610 Moscow (Russian Federation); Soukhanov, O.A. [Energy Systems Institute, 1 st Yamskogo Polya Street 15, 125040 Moscow (Russian Federation); Sharov, Y.V. [Moscow Power Engineering Institute, Krasnokazarmennaya Street 14, 111250 Moscow (Russian Federation)

    2008-07-15

    This paper presents foundations of the optimization method intended for solution of power systems operation problems and based on the principles of functional modeling (FM). This paper also presents several types of hierarchical FM algorithms for economic dispatch in these systems derived from this method. According to the FM method a power system is represented by hierarchical model consisting of systems of equations of lower (subsystem) levels and higher level system of connection equations (SCE), in which only boundary variables of subsystems are present. Solution of optimization problem in accordance with the FM method consists of the following operations: (1) solution of optimization problem for each subsystem (values of boundary variables for subsystems should be determined on the higher level of model); (2) calculation of functional characteristic (FC) of each subsystem, pertaining to state of subsystem on current iteration (these two steps are carried out on the lower level of the model); (3) formation and solution of the higher level system of equations (SCE), which gives values of boundary and supplementary boundary variables on current iteration. The key elements in the general structure of the FM method are FCs of subsystems, which represent them on the higher level of the model as ''black boxes''. Important advantage of hierarchical FM algorithms is that results obtained with them on each iteration are identical to those of corresponding basic one level algorithms. (author)

  1. Road Network Selection Based on Road Hierarchical Structure Control

    Directory of Open Access Journals (Sweden)

    HE Haiwei

    2015-04-01

    Full Text Available A new road network selection method based on hierarchical structure is studied. Firstly, road network is built as strokes which are then classified into hierarchical collections according to the criteria of betweenness centrality value (BC value. Secondly, the hierarchical structure of the strokes is enhanced using structural characteristic identification technique. Thirdly, the importance calculation model was established according to the relationships among the hierarchical structure of the strokes. Finally, the importance values of strokes are got supported with the model's hierarchical calculation, and with which the road network is selected. Tests are done to verify the advantage of this method by comparing it with other common stroke-oriented methods using three kinds of typical road network data. Comparision of the results show that this method had few need to semantic data, and could eliminate the negative influence of edge strokes caused by the criteria of BC value well. So, it is better to maintain the global hierarchical structure of road network, and suitable to meet with the selection of various kinds of road network at the same time.

  2. Large-scale multi-zone optimal power dispatch using hybrid hierarchical evolution technique

    Directory of Open Access Journals (Sweden)

    Manjaree Pandit

    2014-03-01

    Full Text Available A new hybrid technique based on hierarchical evolution is proposed for large, non-convex, multi-zone economic dispatch (MZED problems considering all practical constraints. Evolutionary/swarm intelligence-based optimisation techniques are reported to be effective only for small/medium-sized power systems. The proposed hybrid hierarchical evolution (HHE algorithm is specifically developed for solving large systems. The HHE integrates the exploration and exploitation capabilities of particle swarm optimisation and differential evolution in a novel manner such that the search efficiency is improved substantially. Most hybrid techniques export or exchange features or operations from one algorithm to the other, but in HHE their entire individual features are retained. The effectiveness of the proposed algorithm has been verified on six-test systems having different sizes and complexity levels. Non-convex MZED solution for such large and complex systems has not yet been reported.

  3. Negative Sequence Droop Method based Hierarchical Control for Low Voltage Ride-Through in Grid-Interactive Microgrids

    DEFF Research Database (Denmark)

    Zhao, Xin; Firoozabadi, Mehdi Savaghebi; Quintero, Juan Carlos Vasquez

    2015-01-01

    . In this paper, a voltage support strategy based on negative sequence droop control, which regulate the positive/negative sequence active and reactive power flow by means of sending proper voltage reference to the inner control loop, is proposed for the grid connected MGs to ride through voltage sags under...... complex line impedance conditions. In this case, the MGs should inject a certain amount of positive and negative sequence power to the grid so that the voltage quality at load side can be maintained at a satisfied level. A two layer hierarchical control strategy is proposed in this paper. The primary...... control loop consists of voltage and current inner loops, conventional droop control and virtual impedance loop while the secondary control loop is based on positive/negative sequence droop control which can achieve power injection under voltage sags. Experimental results with asymmetrical voltage sags...

  4. Hierarchical control strategy of reactive power for wind farm based on the composition of the front-end speed adjusting wind turbine%基于前端调速式风电机组的风电场无功分层控制策略*

    Institute of Scientific and Technical Information of China (English)

    燕尧; 董海鹰

    2015-01-01

    前端调速式风电机组具有较强的动态无功调节能力,针对由前端调速式风电机组组成的风电场存在随风电出力的变化而引起的并网点电压波动的问题,提出了一种前端调速式风电场无功电压分层控制策略。该策略首先确定了风电场无功控制点的选取,利用风电场控制点电压偏差,通过整定控制得到整个风电场无功需求量,以风电场内有功网损最小为目标函数,采用改进的遗传算法优化分配给各台风机,并结合静止同步补偿器的无功输出来调节整个风电场的无功输出,达到维持控制点电压稳定的目的。最后以某一风电场的仿真结果验证了该策略的有效性和可行性。%The front-end speed adjusting wind turbine has strong dynamic reactive power regulation ability. Aiming at the wind farm with the front-end speed adjusting wind turbine exists grid connection node voltage fluctuation problem caused by the change of wind power, a hierarchical control strategy of reactive voltage in the front-end speed adjusting wind farm is proposed. The strategy determines the selection of the reactive power control point in the wind farm, utilizes the voltage deviation of the wind farm control point, and obtains the reactive power demand of the whole wind farm by the tuning control. The minimum real power loss of the wind farm is used as objective function to allocate to each wind turbine based on the optimized and improved genetic algorithm. The strategy combines the reactive power output of the Static Synchronous Compensator to adjust the reactive power output of the whole wind farm and thus to achieve the purpose of maintaining the voltage stability of the control point. The simulation results prove the feasibility and effectiveness of the strategy.

  5. Hierarchical sliding mode control for under-actuated cranes design, analysis and simulation

    CERN Document Server

    Qian, Dianwei

    2015-01-01

    This book reports on the latest developments in sliding mode overhead crane control, presenting novel research ideas and findings on sliding mode control (SMC), hierarchical SMC and compensator design-based hierarchical sliding mode. The results, which were previously scattered across various journals and conference proceedings, are now presented in a systematic and unified form. The book will be of interest to researchers, engineers and graduate students in control engineering and mechanical engineering who want to learn the methods and applications of SMC.

  6. Activate distributed energy resources' services: Hierarchical voltage controller as an application

    DEFF Research Database (Denmark)

    Han, Xue; Kosek, Anna Magdalena; Gehrke, Oliver

    2014-01-01

    The flexibilities from controllable distributed energy resources (DERs) offer the opportunities to mitigate some of the operation problems in the power distribution grid. The provision of system services requires the aggregation and coordination of their flexibilities, in order to obtain the flex...... the efficient aggregation and dispatch, and it simplifies the optimization complexity; the involvement of DER flexibilities in voltage services can significantly improve the voltage quality and reduce the grid power loss without additional regulating devices....... the flexible capacity of large scale. In this paper, a hierarchical controller is presented to activate the aggregation, and tries to obtain a global optimum of the grid operation. A distribution grid with large penetration of highly varying generation or load is under the risk that the voltage quality...... delivered to the end users is very poor. Hence, a coordinated voltage control function is investigated given such control hierarchy utilizing the flexibilities from the DER units to obtain an optimal voltage profile along the distribution feeder. The results are two folded: the controller enables...

  7. Hierarchical flight control system synthesis for rotorcraft-based unmanned aerial vehicles

    Science.gov (United States)

    Shim, Hyunchul

    The Berkeley Unmanned Aerial Vehicle (UAV) research aims to design, implement, and analyze a group of autonomous intelligent UAVs and UGVs (Unmanned Ground Vehicles). The goal of this dissertation is to provide a comprehensive procedural methodology to design, implement, and test rotorcraft-based unmanned aerial vehicles (RUAVs). We choose the rotorcraft as the base platform for our aerial agents because it offers ideal maneuverability for our target scenarios such as the pursuit-evasion game. Aided by many enabling technologies such as lightweight and powerful computers, high-accuracy navigation sensors and communication devices, it is now possible to construct RUAVs capable of precise navigation and intelligent behavior by the decentralized onboard control system. Building a fully functioning RUAV requires a deep understanding of aeronautics, control theory and computer science as well as a tremendous effort for implementation. These two aspects are often inseparable and therefore equally highlighted throughout this research. The problem of multiple vehicle coordination is approached through the notion of a hierarchical system. The idea behind the proposed architecture is to build a hierarchical multiple-layer system that gradually decomposes the abstract mission objectives into the physical quantities of control input. Each RUAV incorporated into this system performs the given tasks and reports the results through the hierarchical communication channel back to the higher-level coordinator. In our research, we provide a theoretical and practical approach to build a number of RUAVs based on commercially available navigation sensors, computer systems, and radio-controlled helicopters. For the controller design, the dynamic model of the helicopter is first built. The helicopter exhibits a very complicated multi-input multi-output, nonlinear, time-varying and coupled dynamics, which is exposed to severe exogenous disturbances. This poses considerable difficulties for

  8. Using variance components to estimate power in a hierarchically nested sampling design.

    Science.gov (United States)

    Dzul, Maria C; Dixon, Philip M; Quist, Michael C; Dinsmore, Stephen J; Bower, Michael R; Wilson, Kevin P; Gaines, D Bailey

    2013-01-01

    We used variance components to assess allocation of sampling effort in a hierarchically nested sampling design for ongoing monitoring of early life history stages of the federally endangered Devils Hole pupfish (DHP) (Cyprinodon diabolis). Sampling design for larval DHP included surveys (5 days each spring 2007-2009), events, and plots. Each survey was comprised of three counting events, where DHP larvae on nine plots were counted plot by plot. Statistical analysis of larval abundance included three components: (1) evaluation of power from various sample size combinations, (2) comparison of power in fixed and random plot designs, and (3) assessment of yearly differences in the power of the survey. Results indicated that increasing the sample size at the lowest level of sampling represented the most realistic option to increase the survey's power, fixed plot designs had greater power than random plot designs, and the power of the larval survey varied by year. This study provides an example of how monitoring efforts may benefit from coupling variance components estimation with power analysis to assess sampling design.

  9. Loss Performance Modeling for Hierarchical Heterogeneous Wireless Networks With Speed-Sensitive Call Admission Control

    DEFF Research Database (Denmark)

    Huang, Qian; Huang, Yue-Cai; Ko, King-Tim;

    2011-01-01

    dimensioning and planning. This paper investigates the computationally efficient loss performance modeling for multiservice in hierarchical heterogeneous wireless networks. A speed-sensitive call admission control (CAC) scheme is considered in our model to assign overflowed calls to appropriate tiers...

  10. Energy Management Systems and tertiary regulation in hierarchical control architectures for islanded micro-grids

    DEFF Research Database (Denmark)

    Sanseverino, Eleonora Riva; Di Silvestre, Maria Luisa; Quang, Ninh Nguyen;

    2015-01-01

    In this paper, the structure of the highest level of a hierarchical control architecture for micro-grids is proposed. Such structure includes two sub-levels: the Energy Management System, EMS, and the tertiary regulation. The first devoted to energy resources allocation in each time slot based...... on marginal production costs, the latter aiming at finding the match between production and consumption satisfying the constraints set by the EMS level about the energy production in each time slot. Neglecting the efficiency of the different energy generation systems as well as that of the infrastructure...... for electrical energy distribution, the problem dealt with by the EMS sub-level is linear and can be solved by well known Linear Programming optimization procedures. The tertiary sub-level, below the EMS, optimizes mainly technical objectives and requires the solution of the Optimal Power Flow problem. After...

  11. Hierarchically Coordinated Power Management for Target Tracking in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Feng Juan

    2013-10-01

    Full Text Available Energy efficiency is very important for wireless sensor networks (WSNs since sensor nodes have a limited energy supply from a battery. So far, a lot research has focused on this issue, while less emphasis has been placed on the adaptive sleep time for each node with a consideration for the application constraints. In this paper, we propose a hierarchically coordinated power management (HCPM approach, which both addresses the energy conservation problem and reduces the packet forwarding delay for target tracking WSNs based on a virtual‐grid‐based network structure. We extend the network lifetime by adopting an adaptive sleep scheduling scheme that combines the local power management (PM and the adaptive coordinate PM strategies to schedule the activities of the sensor nodes at the surveillance stage. Furthermore, we propose a hierarchical structure for the tracking stage. Experimental results show that the proposed approach has a greater capability of extending the network lifetime while maintaining a short transmission delay when compared with the protocol which does not consider the application constraints in target tracking sensor networks.

  12. Vehicle Chassis Integrated Control Based on Multimodel and Multilevel Hierarchical Control

    Directory of Open Access Journals (Sweden)

    Shu-en Zhao

    2014-01-01

    Full Text Available Aiming at the differences of vehicle chassis key subsystems influence on vehicle handling stability and effective acting regions, comprehensive considering of the nonlinear characteristic of the tires and the dynamic coupling among suspension, steering, and braking subsystems in vehicle chassis, the 14-DOF full vehicle model is built. Based on the control characteristic local optimum of each subsystem, multilevel hierarchical control theory is adopted and the vehicle stability coordinated control system including organization, coordination, and execution level is established. Using sliding mode control theory and the inverse tire model, the generalized target forces and moments from organization level are translated into the tire sideslip angle and slip ratio. And then, based on the principle of functional allocation, the control functions of each subsystem are coordinated and the function decoupling of vehicle chassis complex system is realized. The Matlab/Simulink platform is used and the full vehicle stability coordinated control system is simulated. The results show that the full vehicle coordinated control system based on multilevel hierarchical control theory can improve the vehicle stability preferably than the subsystem combined control and uncontrolled system.

  13. Microgrids: Hierarchical Control and an Overview of the Control and Reserve Management Strategies

    DEFF Research Database (Denmark)

    Vandoorn, T.L.; Vasquez, Juan Carlos; de Kooning, D.M.

    2013-01-01

    in the network, allowing the DG units to actively contribute in the frequency and voltage regulation. Microgrids can provide such coordination by aggregating DG, (controllable) loads and storage in small-scale networks, that can operate both in grid-connected and islanded mode. Here, the islanded operating...... as either local or centralized. In this article, the hierarchical control for application in microgrids is discussed and an overview of the control strategies is given with respect to the reserve provision by the DG units, loads and storage equipment....

  14. Developing a Hierarchical Decision Model to Evaluate Nuclear Power Plant Alternative Siting Technologies

    Science.gov (United States)

    Lingga, Marwan Mossa

    A strong trend of returning to nuclear power is evident in different places in the world. Forty-five countries are planning to add nuclear power to their grids and more than 66 nuclear power plants are under construction. Nuclear power plants that generate electricity and steam need to improve safety to become more acceptable to governments and the public. One novel practical solution to increase nuclear power plants' safety factor is to build them away from urban areas, such as offshore or underground. To date, Land-Based siting is the dominant option for siting all commercial operational nuclear power plants. However, the literature reveals several options for building nuclear power plants in safer sitings than Land-Based sitings. The alternatives are several and each has advantages and disadvantages, and it is difficult to distinguish among them and choose the best for a specific project. In this research, we recall the old idea of using the alternatives of offshore and underground sitings for new nuclear power plants and propose a tool to help in choosing the best siting technology. This research involved the development of a decision model for evaluating several potential nuclear power plant siting technologies, both those that are currently available and future ones. The decision model was developed based on the Hierarchical Decision Modeling (HDM) methodology. The model considers five major dimensions, social, technical, economic, environmental, and political (STEEP), and their related criteria and sub-criteria. The model was designed and developed by the author, and its elements' validation and evaluation were done by a large number of experts in the field of nuclear energy. The decision model was applied in evaluating five potential siting technologies and ranked the Natural Island as the best in comparison to Land-Based, Floating Plant, Artificial Island, and Semi-Embedded plant.

  15. Thermionic power system power processing and control

    Science.gov (United States)

    Metcalf, Kenneth J.

    1992-01-01

    Thermionic power systems are being considered for space-based miltary applications because of their survivability and high efficiency. Under the direction of the Air Force, conceptual designs were generated for two thermionic power systems to determine preliminary system performance data and direct future component development. This paper discusses the power processing and control (PP&C) subsystem that conditions the thermionic converter power and controls the operation of the reactor and thermionic converter subsystems. The baseline PP&C design and design options are discussed, mass and performance data are provided, and technology needs are identified. The impact on PP&C subsystem mass and efficiency of alternate power levels and boom lengths is also presented. The baseline PP&C subsystem is lightweight and reliable, and it uses proven design concepts to minimize development and testing time. However, the radiation dosages specified in the program research and development announcement (PRDA) are 10 to 100 times the capabilities of present semiconductor devices. While these levels are aggressive, they are considered to be achievable by 1995 if the Air Force and other government agencies continue to actively develop radiation resistant electronics devices for military applications.

  16. Power-control switch

    Science.gov (United States)

    Kessler, L. L.

    1976-01-01

    Constant-current source creates drive current independent of input-voltage variations, 50% reduction in power loss in base drive circuitry, maintains essentially constant charge rate, and improves rise-time consistency over input voltage range.

  17. Preventing Distribution Grid Congestion by Integrating Indirect Control in a Hierarchical Electric Vehicles Management System

    DEFF Research Database (Denmark)

    Hu, Junjie; Si, Chengyong; Lind, Morten

    2016-01-01

    In this paper, a hierarchical management system is proposed to integrate electric vehicles (EVs) into a distribution grid. Three types of actors are included in the system: Distribution system operators (DSOs), Fleet operators (FOs) and EV owners. In contrast to a typical hierarchical control...... system where the upper level controller directly controls the lower level subordinated nodes, this study aims to integrate two common indirect control methods:market-based control and price-based control into the hierarchical electric vehicles management system. Specifically, on the lower level...... of the hierarchy, the FOs coordinate the charging behaviors of their EV users using a price-based control method. A parametric utility model is used on the lower level to characterize price elasticity of electric vehicles and thus used by the FO to coordinate the individual EV charging. On the upper level...

  18. Statistical Power Supply Dynamic Noise Prediction in Hierarchical Power Grid and Package Networks

    OpenAIRE

    Piccinini, Gianluca; Graziano, Mariagrazia

    2008-01-01

    One of the most crucial high performance systems-on-chip design challenge is to front their power supply noise sufferance due to high frequencies, huge number of functional blocks and technology scaling down. Marking a difference from traditional post physical-design static voltage drop analysis, /a priori dynamic voltage drop/evaluation is the focus of this work. It takes into account transient currents and on-chip and package /RLC/ parasitics while exploring the power grid design solution s...

  19. STEADY-STATE HIERARCHICAL INTELLIGENT CONTROL OF LARGE-SCALE INDUSTRIAL PROCESSES

    Institute of Scientific and Technical Information of China (English)

    WAN Baiwu

    2004-01-01

    This paper considers the fourth stage of development of hierarchical control ofindustrial processes to the intelligent control and optimization stage, and reviews what theauthor and his Group have been investigating for the past decade in the on-line steady-state hierarchical intelligent control of large-scale industrial processes (LSIP)This papergives a definition of intelligent control of large-scale systems first, and then reviews the useof neural networks for identification and optimization, the use of expert systems to solvesome kinds of hierarchical multi-objective optimization problems by an intelligent decisionunit (ID), the use of fuzzy logic control, and the use of iterative learning controlSeveralimplementation examples are introducedThis paper reviews other main achievements ofthe Group alsoFinally this paper gives a perspective of future development.

  20. Microprocessor control for standardized power control systems

    Science.gov (United States)

    Green, D. G.; Perry, E.

    1978-01-01

    The use of microcomputers in space-oriented power systems as a replacement for existing inflexible analog type controllers has been proposed. This study examines multiprocessor systems, various modularity concepts and presents a conceptualized power system incorporating a multiprocessor controller as well as preliminary results from a breadboard model of the proposed system.

  1. Robust power system frequency control

    CERN Document Server

    Bevrani, Hassan

    2008-01-01

    Emphasizes the physical and engineering aspects of the power system frequency control design problem while providing a conceptual understanding of frequency regulation and application of robust control techniques. This book summarizes the author's research outcomes, contributions and experiences with power system frequency regulation.

  2. DSP controlled power converter

    OpenAIRE

    Chan, CH; Pong, MH

    1995-01-01

    A digital controller is designed and implemented by a Digital Signal Processor (DSP) to replace the Pulse Width Modulator (PWM) and error amplifier compensation network in a two wheeler forward converter. The DSP controller is designed in three approaches: a) Discretization of analog controller - the design is based on the transfer function of the error amplifier compensation network. b) Digital PID controller design - the design is based on the general form of the pulse transfer function of ...

  3. Power generation, operation, and control

    CERN Document Server

    Wood, Allen J

    2012-01-01

    A comprehensive text on the operation and control of power generation and transmission systems In the ten years since Allen J. Wood and Bruce F. Wollenberg presented their comprehensive introduction to the engineering and economic factors involved in operating and controlling power generation systems in electric utilities, the electric power industry has undergone unprecedented change. Deregulation, open access to transmission systems, and the birth of independent power producers have altered the structure of the industry, while technological advances have created a host of new opportunities

  4. Power-constrained intermittent control

    OpenAIRE

    Gawthrop, P.; Wagg, D.; Neild, S.; Wang, L

    2013-01-01

    In this article, input power, as opposed to the usual input amplitude, constraints are introduced in the context of intermittent control. They are shown to result in a combination of quadratic optimisation and quadratic constraints. The main motivation for considering input power constraints is its similarity with semi-active control. Such methods are commonly used to provide damping in mechanical systems and structures. It is shown that semi-active control can be re-expressed and generalised...

  5. A novel 300 kW arc plasma inverter system based on hierarchical controlled building block structure

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    To date, the high power arc plasma technology is widely used. A next generation high power arc plasma system based on building block structure is presented. The whole arc plasma inverter system is composed of 12 paralleled units to increase the system output capability. The hierarchical control system is adopted to improve the reliability and flexibility of the high power arc plasma inverter. To ensure the reliable turn on and off of the IGBT module in each building block unit, a special pulse drive circuit is designed by using pulse transformer. The experimental result indicates that the high power arc plasma inverter system can transfer 300 kW arc plasma energy reliably with high efficiency.

  6. A method of transition conflict resolving in hierarchical control

    Science.gov (United States)

    Łabiak, Grzegorz

    2016-09-01

    The paper concerns the problem of automatic solving of transition conflicts in hierarchical concurrent state machines (also known as UML state machine). Preparing by the designer a formal specification of a behaviour free from conflicts can be very complex. In this paper, it is proposed a method for solving conflicts through transition predicates modification. Partially specified predicates in the nondeterministic diagram are transformed into a symbolic Boolean space, whose points of the space code all possible valuations of transition predicates. Next, all valuations under partial specifications are logically multiplied by a function which represents all possible orthogonal predicate valuations. The result of this operation contains all possible collections of predicates, which under given partial specification make that the original diagram is conflict free and deterministic.

  7. Hierarchical Control Strategy for the Cooperative Braking System of Electric Vehicle

    OpenAIRE

    Jiankun Peng; Hongwen He; Wei Liu; Hongqiang Guo

    2015-01-01

    This paper provides a hierarchical control strategy for cooperative braking system of an electric vehicle with separated driven axles. Two layers are defined: the top layer is used to optimize the braking stability based on two sliding mode control strategies, namely, the interaxle control mode and signal-axle control strategies; the interaxle control strategy generates the ideal braking force distribution in general braking condition, and the single-axle control strategy can ensure braking s...

  8. Hierarchical hybrid control network design based on LON and master-slave RS-422/485 protocol

    Institute of Scientific and Technical Information of China (English)

    彭可; 陈际达; 陈岚

    2002-01-01

    Aiming at the weaknesses of LON bus, combining the coexistence of fieldbus and DCS (Distribu-ted Control Systems) in control networks, the authors introduce a hierarchical hybrid control network design based on LON and master-slave RS-422/485 protocol. This design adopts LON as the trunk, master-slave RS-422/485 control networks are connected to LON as special subnets by dedicated gateways. It is an implementation method for isomerous control network integration. Data management is ranked according to real-time requirements for different network data. The core components, such as control network nodes, router and gateway, are detailed in the paper. The design utilizes both communication advantage of LonWorks technology and the more powerful control ability of universal MCUs or PLCs, thus it greatly increases system response speed and performance-cost ratio.

  9. A Rapid Prototyping Tool for Embedded, Real-Time Hierarchical Control Systems

    Directory of Open Access Journals (Sweden)

    Ramamoorthy Subramanian

    2008-01-01

    Full Text Available Abstract Laboratory Virtual Instrumentation and Engineering Workbench (LabVIEW is a graphical programming tool based on the dataflow language G. Recently, runtime support for a hard real-time environment has become available for LabVIEW, which makes it an option for embedded systems prototyping. Due to its characteristics, the environment presents itself as an ideal tool for both the design and implementation of embedded software. In this paper, we study the design and implementation of embedded software by using G as the specification language and the LabVIEW RT real-time platform. One of the main advantages of this approach is that the environment leads itself to a very smooth transition from design to implementation, allowing for powerful cosimulation strategies (e.g., hardware in the loop, runtime modeling. We characterize the semantics and formal model of computation of G. We compare it to other models of computation and develop design rules and algorithms to propose sound embedded design in the language. We investigate the specification and mapping of hierarchical control systems in LabVIEW and G. Finally, we describe the development of a state-of-the-art embedded motion control system using LabVIEW as the specification, simulation and implementation tool, using the proposed design principles. The solution is state-of-the-art in terms of flexibility and control performance.

  10. A Rapid Prototyping Tool for Embedded, Real-Time Hierarchical Control Systems

    Directory of Open Access Journals (Sweden)

    Hugo Andrade

    2008-12-01

    Full Text Available Laboratory Virtual Instrumentation and Engineering Workbench (LabVIEW is a graphical programming tool based on the dataflow language G. Recently, runtime support for a hard real-time environment has become available for LabVIEW, which makes it an option for embedded systems prototyping. Due to its characteristics, the environment presents itself as an ideal tool for both the design and implementation of embedded software. In this paper, we study the design and implementation of embedded software by using G as the specification language and the LabVIEW RT real-time platform. One of the main advantages of this approach is that the environment leads itself to a very smooth transition from design to implementation, allowing for powerful cosimulation strategies (e.g., hardware in the loop, runtime modeling. We characterize the semantics and formal model of computation of G. We compare it to other models of computation and develop design rules and algorithms to propose sound embedded design in the language. We investigate the specification and mapping of hierarchical control systems in LabVIEW and G. Finally, we describe the development of a state-of-the-art embedded motion control system using LabVIEW as the specification, simulation and implementation tool, using the proposed design principles. The solution is state-of-the-art in terms of flexibility and control performance.

  11. Smart Energy Systems Laboratory - A Real-Time Control, ICT and Power HIL platform

    DEFF Research Database (Denmark)

    Iov, Florin; Petersen, Lennart

    using a complete low voltage grid implementation in Opal-RT. Moreover, results for hierarchical power balancing and voltage control involving assets connected to MV and LV distribution system are shown. Finally, on-going activities regarding voltage control of large wind power plants are presented....

  12. HIERARCHICAL ACCESS CONTROL IN DYNAMIC PEER GROUPS USING SYMMETRIC POLYNOMIAL AND TREE BASED GROUP ELLIPTIC CURVE DIFFIE HELLMAN SCHEME

    Directory of Open Access Journals (Sweden)

    Nafeesa Begum Jeddy

    2014-01-01

    Full Text Available Hierarchical Access Control in group communication is an active area of research which is difficult to achieve it. Its primary objective is to allow users of a higher authority group to access information or resource held by lower group users and preventing the lower group users to access information held by higher class users. Large collection of collaborative applications in organizations inherently has hierarchical structures for functioning, where providing security by efficient group key management is a big challenging issue. While preserving centralized methods for hierarchical access control, it is difficult to achieve efficiency as a single membership change will result in lot of changes which are difficult to maintain. So, using distributed key agreement techniques is more appropriate for this scenario. This study explore on novel group key agreement approach, which combines both the symmetric polynomial scheme and Tree Based Group elliptic Curve key exchange. Also, it yields a secure protocol suite that is good in fault-tolerant and simple. The efficiency of SP-TGECDH is better than many other schemes. Using TGECDH makes the scheme suitable small Low powered devices.

  13. Optimal Power Flow Control by Rotary Power Flow Controller

    Directory of Open Access Journals (Sweden)

    KAZEMI, A.

    2011-05-01

    Full Text Available This paper presents a new power flow model for rotary power flow controller (RPFC. RPFC injects a series voltage into the transmission line and provides series compensation and phase shifting simultaneously. Therefore, it is able to control the transmission line impedance and the active power flow through it. An RPFC is composed mainly of two rotary phase shifting transformers (RPST and two conventional (series and shunt transformers. Structurally, an RPST consists of two windings (stator and rotor windings. The rotor windings of the two RPSTs are connected in parallel and their stator windings are in series. The injected voltage is proportional to the vector sum of the stator voltages and so its amplitude and angle are affected by the rotor position of the two RPSTs. This paper, describes the steady state operation and single-phase equivalent circuit of the RPFC. Also in this paper, a new power flow model, based on power injection model of flexible ac transmission system (FACTS controllers, suitable for the power flow analysis is introduced. Proposed model is used to solve optimal power flow (OPF problem in IEEE standard test systems incorporating RPFC and the optimal settings and location of the RPFC is determined.

  14. Cosmological parameters, shear maps and power spectra from CFHTLenS using Bayesian hierarchical inference

    CERN Document Server

    Alsing, Justin; Jaffe, Andrew H

    2016-01-01

    We apply two Bayesian hierarchical inference schemes to infer shear power spectra, shear maps and cosmological parameters from the CFHTLenS weak lensing survey - the first application of this method to data. In the first approach, we sample the joint posterior distribution of the shear maps and power spectra by Gibbs sampling, with minimal model assumptions. In the second approach, we sample the joint posterior of the shear maps and cosmological parameters, providing a new, accurate and principled approach to cosmological parameter inference from cosmic shear data. As a first demonstration on data we perform a 2-bin tomographic analysis to constrain cosmological parameters and investigate the possibility of photometric redshift bias in the CFHTLenS data. Under the baseline $\\Lambda$CDM model we constrain $S_8 = \\sigma_8(\\Omega_\\mathrm{m}/0.3)^{0.5} = 0.67 ^{\\scriptscriptstyle+ 0.03 }_{\\scriptscriptstyle- 0.03 }$ $(68\\%)$, consistent with previous CFHTLenS analysis but in tension with Planck. Adding neutrino m...

  15. Hierarchical Distributed Control Design for Multi-agent Systems Using Approximate Simulation

    Institute of Scientific and Technical Information of China (English)

    TANG Yu-Tao; HONG Yi-Guang

    2013-01-01

    In this paper,we consider a hierarchical control design for multi-agent systems based on approximate simulation.To reduce complexity,we first construct a simple abstract system to guide the agents,then we discuss the simulation relations between the abstract system and multiple agents.With the help of this abstract system,distributed hierarchical control is proposed to complete a coordination task.By virtue of a common Lyapunov function,we analyze the collective behaviors with switching multi-agent topology in light of simulation functions.

  16. Dynamic Hierarchical Power Control in Multi-User Cognitive Wi-Fi 2.0 Wireless Networks%认知Wi-Fi 2.0无线网络多用户动态分层功率控制算法∗

    Institute of Scientific and Technical Information of China (English)

    杨春刚; 盛敏; 李建东; 李红艳

    2013-01-01

      具有认知性、自主性和适变性等特点的认知Wi-Fi 2.0无线网络技术,作为提高无线网络容量的重要技术不断引起学术界、标准组织和工业界的关注.针对现有功率控制技术不能刻画多个认知节点存在分层决策的现象,提出一种认知Wi-Fi 2.0无线网络中多用户动态分层功率控制算法.基于提出的斯坦科尔伯格(Stackelberg)容量最大化博弈模型,为认知Wi-Fi 2.0无线网络中感知信息不对称的多用户分别设计了分布式功率控制方法,实现领导者用户和跟随者用户的多阶段动态交互在保证个体效用的同时实现网络整体性能.该算法根据当前认知Wi-Fi 2.0无线网络中多个认知节点接入频谱顺序的不同,确定领导者用户和跟随者用户;然后,对于领导者和跟随者分别采用不同的功率控制策略,并多次交互实现多用户分层算法的动态交互收敛.蒙特卡洛仿真验证了算法的有效性.%Cognitive Wi-Fi 2.0 wireless networks with the typical characteristics of cognition, reconfirmation and self-organizing abilities as the novel open spectrum sharing technology, that are used to improve the network performance, have promisingly captured a great attention from the wireless community. In this paper, to capture the hierarchical decision-making properties of the power control, the study proposes a dynamic hierarchical power control for the cognitive Wi-Fi 2.0 wireless networks. The spectrum sharing issue is formulated as the Stackelberg game with the more foresighted cognitive users as the leaders and short-sighted users as follower, and the paper derives the closed-form power policy, respectively. Meanwhile, the study concludes that this policy can achieve the optimal performance in the weak interference environment after analysis. Simulations results show that the proposed algorithm converges after limited iterations, which also effectively guarantees the optimal

  17. Digital control in power electronics

    CERN Document Server

    Buso, Simone

    2015-01-01

    This book presents the reader, whether an electrical engineering student in power electronics or a design engineer, a selection of power converter control problems and their basic digital solutions, based on the most widespread digital control techniques. The presentation is primarily focused on different applications of the same power converter topology, the half-bridge voltage source inverter, considered both in its single- and three-phase implementation. This is chosen as the test case because, besides being simple and well known, it allows the discussion of a significant spectrum of the mo

  18. Bidirectional power converter control electronics

    Science.gov (United States)

    Mildice, J. W.

    1987-01-01

    The object of this program was to design, build, test, and deliver a set of control electronics suitable for control of bidirectional resonant power processing equipment of the direct output type. The program is described, including the technical background, and results discussed. Even though the initial program tested only the logic outputs, the hardware was subsequently tested with high-power breadboard equipment, and in the testbed of NASA contract NAS3-24399. The completed equipment is now operating as part of the Space Station Power System Test Facility at NASA Lewis Research Center.

  19. Power optimized programmable embedded controller

    CERN Document Server

    Kamaraju, M; Tilak, A V N; 10.5121/ijcnc.2010.2409

    2010-01-01

    Now a days, power has become a primary consideration in hardware design, and is critical in computer systems especially for portable devices with high performance and more functionality. Clock-gating is the most common technique used for reducing processor's power. In this work clock gating technique is applied to optimize the power of fully programmable Embedded Controller (PEC) employing RISC architecture. The CPU designed supports i) smart instruction set, ii) I/O port, UART iii) on-chip clocking to provide a range of frequencies , iv) RISC as well as controller concepts. The whole design is captured using VHDL and is implemented on FPGA chip using Xilinx .The architecture and clock gating technique together is found to reduce the power consumption by 33.33% of total power consumed by this chip.

  20. Radiation tolerant power converter controls

    CERN Document Server

    Todd, B; King, Q; Uznanski, S

    2012-01-01

    The Large Hadron Collider (LHC) at the European Organisation for Nuclear Research (CERN) is the world's most powerful particle collider. The LHC has several thousand magnets, both warm and super-conducting, which are supplied with current by power converters. Each converter is controlled by a purpose-built electronic module called a Function Generator Controller (FGC). The FGC allows remote control of the power converter and forms the central part of a closed-loop control system where the power converter voltage is set, based on the converter output current and magnet-circuit characteristics. Some power converters and FGCs are located in areas which are exposed to beam-induced radiation. There are numerous radiation induced effects, some of which lead to a loss of control of the power converter, having a direct impact upon the accelerator's availability. Following the first long shut down (LS1), the LHC will be able to run with higher intensity beams and higher beam energy. This is expected to lead to signifi...

  1. The hierarchical expert tuning of PID controllers using tools of soft computing.

    Science.gov (United States)

    Karray, F; Gueaieb, W; Al-Sharhan, S

    2002-01-01

    We present soft computing-based results pertaining to the hierarchical tuning process of PID controllers located within the control loop of a class of nonlinear systems. The results are compared with PID controllers implemented either in a stand alone scheme or as a part of conventional gain scheduling structure. This work is motivated by the increasing need in the industry to design highly reliable and efficient controllers for dealing with regulation and tracking capabilities of complex processes characterized by nonlinearities and possibly time varying parameters. The soft computing-based controllers proposed are hybrid in nature in that they integrate within a well-defined hierarchical structure the benefits of hard algorithmic controllers with those having supervisory capabilities. The controllers proposed also have the distinct features of learning and auto-tuning without the need for tedious and computationally extensive online systems identification schemes.

  2. Power control for ac motor

    Science.gov (United States)

    Dabney, R. W. (Inventor)

    1984-01-01

    A motor controller employing a triac through which power is supplied to a motor is described. The open circuit voltage appearing across the triac controls the operation of a timing circuit. This timing circuit triggers on the triac at a time following turn off which varies inversely as a function of the amplitude of the open circuit voltage of the triac.

  3. Hierarchical Control Architecture for Demand Response in Smart Grid Scenario

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu Prasad; Bak-Jensen, Birgitte; Mahat, Pukar

    2013-01-01

    effective tool for optimum asset utilization and to avoid or delay the need for new infrastructure investment. Furthermore, most of the power networks are under the process of reconfiguration to realize the concept of smart grid and are at the transforming stage to support various forms of DR. However...

  4. Radiation tolerant power converter controls

    Science.gov (United States)

    Todd, B.; Dinius, A.; King, Q.; Uznanski, S.

    2012-11-01

    The Large Hadron Collider (LHC) at the European Organisation for Nuclear Research (CERN) is the world's most powerful particle collider. The LHC has several thousand magnets, both warm and super-conducting, which are supplied with current by power converters. Each converter is controlled by a purpose-built electronic module called a Function Generator Controller (FGC). The FGC allows remote control of the power converter and forms the central part of a closed-loop control system where the power converter voltage is set, based on the converter output current and magnet-circuit characteristics. Some power converters and FGCs are located in areas which are exposed to beam-induced radiation. There are numerous radiation induced effects, some of which lead to a loss of control of the power converter, having a direct impact upon the accelerator's availability. Following the first long shut down (LS1), the LHC will be able to run with higher intensity beams and higher beam energy. This is expected to lead to significantly increased radiation induced effects in materials close to the accelerator, including the FGC. Recent radiation tests indicate that the current FGC would not be sufficiently reliable. A so-called FGClite is being designed to work reliably in the radiation environment in the post-LS1 era. This paper outlines the concepts of power converter controls for machines such as the LHC, introduces the risks related to radiation and a radiation tolerant project flow. The FGClite is then described, with its key concepts and challenges: aiming for high reliability in a radiation field.

  5. Robust power system frequency control

    CERN Document Server

    Bevrani, Hassan

    2014-01-01

    This updated edition of the industry standard reference on power system frequency control provides practical, systematic and flexible algorithms for regulating load frequency, offering new solutions to the technical challenges introduced by the escalating role of distributed generation and renewable energy sources in smart electric grids. The author emphasizes the physical constraints and practical engineering issues related to frequency in a deregulated environment, while fostering a conceptual understanding of frequency regulation and robust control techniques. The resulting control strategi

  6. Controlling Torque Distribution for Parallel Hybrid Vehicle Based on Hierarchical Structure Fuzzy Logic

    Institute of Scientific and Technical Information of China (English)

    HuangMiao-hua; JinGuo-dong

    2003-01-01

    The Hierarchical Structure Fuzzy Logic Control(HSFLC) strategies of torque distribute for Parallel Hybrid Electric Vehicle (PHEV) in the mocle of operation of the vehicle i. e. , acceleration, cruise, deceleration etc. have been studied. Using secondly developed the hybrid vehicle simulation tool ADVISOR, the dynamic model of PHEV has been set up by MATLAB/SIMULINK. The engine, motor as well as the battery characteristics have been studied. Simulation results show that the proposed hierarchical structured fuzzy logic control strategy is effective over the entire operating range of the vehicle in terms of fuel economy. Based on the analyses of the simulation results and driver's experiences, a fuzzy controller is designed and developed to control the torque distribution. The controller is evaluated via hardware-in-the-loop simulator (HILS). The results show that controller verify its value.

  7. Power generation, operation and control

    CERN Document Server

    Wood, Allen J; Sheblé, Gerald B

    2013-01-01

    Since publication of the second edition, there have been extensive changes in the algorithms, methods, and assumptions in energy management systems that analyze and control power generation. This edition is updated to acquaint electrical engineering students and professionals with current power generation systems. Algorithms and methods for solving integrated economic, network, and generating system analysis are provided. Also included are the state-of-the-art topics undergoing evolutionary change, including market simulation, multiple market analysis, multiple interchange contract analysis, c

  8. Enriching the Hierarchical Model of Achievement Motivation: Autonomous and Controlling Reasons Underlying Achievement Goals

    Science.gov (United States)

    Michou, Aikaterini; Vansteenkiste, Maarten; Mouratidis, Athanasios; Lens, Willy

    2014-01-01

    Background: The hierarchical model of achievement motivation presumes that achievement goals channel the achievement motives of need for achievement and fear of failure towards motivational outcomes. Yet, less is known whether autonomous and controlling reasons underlying the pursuit of achievement goals can serve as additional pathways between…

  9. Hierarchical predictive control scheme for distributed energy storage integrated with residential demand and photovoltaic generation

    NARCIS (Netherlands)

    Lampropoulos, I.; Garoufalis, P.; van den Bosch, P.P.J.; Kling, W.L.

    2015-01-01

    A hierarchical control scheme is defined for the energy management of a battery energy storage system which is integrated in a low-voltage distribution grid with residential customers and photovoltaic installations. The scope is the economic optimisation of the integrated system by employing predict

  10. A Quality Control Design for Validating Hierarchical Sequencing of Programed Instruction.

    Science.gov (United States)

    Tennyson, Robert D.; Boutwell, Richard C.

    A quality control model is proposed to facilitate development of effective instructional programs. The theories of R. M. Gagne and of M. D. Merrill provide the foundations for a theory of sequencing behavior into a hierarchical order in order to improve the learning potential of an instructional program. The initial step in the procedural model is…

  11. Local Design Methodologies for a Hierarchic Control Architecture

    Science.gov (United States)

    1990-04-12

    Journal of Engineering for Power, Vol. 105, No. 3, July 1983, pp 585-590. Jensen, D.W., Crawley, E.F., Dugundji , J., "Vibration of Cantilevered Graphite... Dugundji , J., "Frequency Determination and Nondimensionalization of Composite Cantilever Plates," Journal of Sound and Vibration, Vol. 72_, No. 1, 8...at the Air Force Vibration Damping Workshop I, Long Beach, California, February 1984. Crawley, E.F., Kerrebrock, J.L., Dugundji , J., "Preliminary

  12. Assessing Short-Term Voltage Stability of Electric Power Systems by a Hierarchical Intelligent System.

    Science.gov (United States)

    Xu, Yan; Zhang, Rui; Zhao, Junhua; Dong, Zhao Yang; Wang, Dianhui; Yang, Hongming; Wong, Kit Po

    2016-08-01

    In the smart grid paradigm, growing integration of large-scale intermittent renewable energies has introduced significant uncertainties to the operations of an electric power system. This makes real-time dynamic security assessment (DSA) a necessity to enable enhanced situational-awareness against the risk of blackouts. Conventional DSA methods are mainly based on the time-domain simulation, which are insufficiently fast and knowledge-poor. In recent years, the intelligent system (IS) strategy has been identified as a promising approach to facilitate real-time DSA. While previous works mainly concentrate on the rotor angle stability, this paper focuses on another yet increasingly important dynamic insecurity phenomenon-the short-term voltage instability, which involves fast and complex load dynamics. The problem is modeled as a classification subproblem for transient voltage collapse and a prediction subproblem for unacceptable dynamic voltage deviation. A hierarchical IS is developed to address the two subproblems sequentially. The IS is based on ensemble learning of random-weights neural networks and is implemented in an offline training, a real-time application, and an online updating pattern. The simulation results on the New England 39-bus system verify its superiority in both learning speed and accuracy over some state-of-the-art learning algorithms.

  13. Numerically Optimized Uniformly Most Powerful Alphabets for Hierarchical-Decode-and-Forward Two-Way Relaying

    Directory of Open Access Journals (Sweden)

    M. Hekrdla

    2011-01-01

    Full Text Available We address the issue of the parametric performance of the Hierarchical-Decode-and-Forward (HDF strategy in a wireless 2-way relay channel. Promising HDF, representing the concept of wireless network coding, performs well with a pre-coding strategy that requires Channel State Information (CSI on the transceiver side. Assuming a practical case when CSI is available only on the receiver side and the channel conditions do not allow adaptive strategies, the parametrization causes significant HDF performance degradation for some modulation alphabets. Alphabets that are robust to the parametrization (denoted Uniformly Most Powerful (UMP have already been proposed restricting on the class of non-linear multi-dimensional frequency modulations. In this work, we focus on the general design of unrestricted UMP alphabets. We formulate an optimization problem which is solved by standard non-linear convex constrained optimization algorithms, particularly by Nelder-Mead global optimization search, which is further refined by the local interior-pointsmethod.

  14. Hierarchical Motion Control for a Team of Humanoid Soccer Robots

    Directory of Open Access Journals (Sweden)

    Seung-Joon Yi

    2016-02-01

    Full Text Available Robot soccer has become an effective benchmarking problem for robotics research as it requires many aspects of robotics including perception, self localization, motion planning and distributed coordination to work in uncertain and adversarial environments. Especially with humanoid robots that lack inherent stability, a capable and robust motion controller is crucial for generating walking and kicking motions without losing balance. In this paper, we describe the details of a motion controller to control a team of humanoid soccer robots, which consists of a hierarchy of controllers with different time frames and abstraction levels. A low level controller governs the real time control of each joint angle, either using target joint angles or target endpoint transforms. A mid-level controller handles bipedal locomotion and balancing of the robot. A high level controller decides the long term behavior of the robot, and finally the team level controller coordinates the behavior of a group of robots by means of asynchronous communication between the robots. The suggested motion system has been successfully used by many humanoid robot teams at the RoboCup international robot soccer competitions, which has awarded us five successful championships in a row.

  15. Hierarchical Motion Control for a Team of Humanoid Soccer Robots

    Directory of Open Access Journals (Sweden)

    Seung-Joon Yi

    2016-02-01

    Full Text Available Robot soccer has become an effective benchmarking problem for robotics research as it requires many aspects of robotics including perception, self localization, motion planning and distributed coordination to work in uncertain and adversarial environments. Especially with humanoid robots that lack inherent stability, a capable and robust motion controller is crucial for generating walking and kicking motions without losing balance. In this paper, we describe the details of a motion controller to control a team of humanoid soccer robots, which consists of a hierarchy of controllers with different time frames and abstraction levels. A low level controller governs the real time control of each joint angle, either using target joint angles or target endpoint transforms. A mid-level controller handles bipedal locomotion and balancing of the robot. A high level controller decides the long term behavior of the robot, and finally the team level controller coordinates the behavior of a group of robots by means of asynchronous communication between the robots. The suggested motion system has been successfully used by many humanoid robot teams at the RoboCup international robot soccer competitions, which has awarded us five successful championships in a row.

  16. Hierarchical type-2 fuzzy aggregation of fuzzy controllers

    CERN Document Server

    Cervantes, Leticia

    2016-01-01

    This book focuses on the fields of fuzzy logic, granular computing and also considering the control area. These areas can work together to solve various control problems, the idea is that this combination of areas would enable even more complex problem solving and better results. In this book we test the proposed method using two benchmark problems: the total flight control and the problem of water level control for a 3 tank system. When fuzzy logic is used it make it easy to performed the simulations, these fuzzy systems help to model the behavior of a real systems, using the fuzzy systems fuzzy rules are generated and with this can generate the behavior of any variable depending on the inputs and linguistic value. For this reason this work considers the proposed architecture using fuzzy systems and with this improve the behavior of the complex control problems.

  17. Robust Hierarchical Control for Uncertain Multivariable Hexarotor Systems

    Directory of Open Access Journals (Sweden)

    Wei Lin

    2015-01-01

    Full Text Available Multirotor helicopter attracts more attention due to its increased load capacity and being highly maneuverable. However, these helicopters are uncertain multivariable systems, which pose a challenge for their robust controller design. In this paper, a robust two-loop control scheme is proposed for a hexarotor system. The resulted controller consists of a nominal controller and a robust compensator. The robust compensators are added to restrain the influences of uncertainties such as nonlinear dynamics, coupling, parametric uncertainties, and external disturbances. It is proven that the tracking errors are ultimately bounded with specified boundaries by choosing the parameters of the robust compensators. Simulation results on the hexarotor demonstrate the effectiveness of the proposed control method.

  18. Cosmological parameters, shear maps and power spectra from CFHTLenS using Bayesian hierarchical inference

    Science.gov (United States)

    Alsing, Justin; Heavens, Alan; Jaffe, Andrew H.

    2017-04-01

    We apply two Bayesian hierarchical inference schemes to infer shear power spectra, shear maps and cosmological parameters from the Canada-France-Hawaii Telescope (CFHTLenS) weak lensing survey - the first application of this method to data. In the first approach, we sample the joint posterior distribution of the shear maps and power spectra by Gibbs sampling, with minimal model assumptions. In the second approach, we sample the joint posterior of the shear maps and cosmological parameters, providing a new, accurate and principled approach to cosmological parameter inference from cosmic shear data. As a first demonstration on data, we perform a two-bin tomographic analysis to constrain cosmological parameters and investigate the possibility of photometric redshift bias in the CFHTLenS data. Under the baseline ΛCDM (Λ cold dark matter) model, we constrain S_8 = σ _8(Ω _m/0.3)^{0.5} = 0.67+0.03-0.03 (68 per cent), consistent with previous CFHTLenS analyses but in tension with Planck. Adding neutrino mass as a free parameter, we are able to constrain ∑mν linear redshift-dependent photo-z bias Δz = p2(z - p1), we find p_1=-0.25+0.53-0.60 and p_2 = -0.15+0.17-0.15, and tension with Planck is only alleviated under very conservative prior assumptions. Neither the non-minimal neutrino mass nor photo-z bias models are significantly preferred by the CFHTLenS (two-bin tomography) data.

  19. Exporting Variables in a Hierarchically Distributed Control System

    Energy Technology Data Exchange (ETDEWEB)

    Chamizo Llatas, M.

    1995-07-01

    We describe the Remote Variable Access Service (RVAS), a network service developed and used in the distributed control and monitoring system of the TJ-II Heliac, which is under construction at CIEMAT (Madrid, Spain) and devoted to plasma studies in the nuclear fusion field. The architecture of the TJ-II control system consists of one central Sun workstation Sparc 10 and several autonomous subsystems based on VME crates with embedded processors running the OS-9 (V.24) real time operating system. The RVAS service allows state variables in local control processes running in subsystems to be exported to remote processes running in the central control workstation. Thus we extend the concept of exporting of file systems in UNIX machines to variables in processes running in different machines. (Author) 6 refs.

  20. Control Strategies for Islanded Microgrid using Enhanced Hierarchical Control Structure with Multiple Current-Loop Damping Schemes

    DEFF Research Database (Denmark)

    Han, Yang; Shen, Pan; Zhao, Xin

    2017-01-01

    In this paper, the modeling, controller design, and stability analysis of the islanded microgrid (MG) using enhanced hierarchical control structure with multiple current loop damping schemes is proposed. The islanded MG is consisted of the parallel-connected voltage source inverters using LCL...

  1. A control architecture to coordinate distributed generators and active power filters coexisting in a microgrid

    DEFF Research Database (Denmark)

    Hashempour, Mohammad M.; Savaghebi, Mehdi; Quintero, Juan Carlos Vasquez

    2016-01-01

    This paper proposes a control architecture of distributed generators (DGs) inverters and shunt active power filters (APFs) in microgrids to compensate voltage harmonics in a coordinated way. For this, a hierarchical control structure is proposed that includes two control levels. The primary (local...

  2. A Control Architecture to Coordinate Distributed Generators and Active Power Filters Coexisting in a Microgrid

    DEFF Research Database (Denmark)

    Hashempour, Mohammad M.; Firoozabadi, Mehdi Savaghebi; Quintero, Juan Carlos Vasquez

    2016-01-01

    This paper proposes a control architecture of distributed generators (DGs) inverters and shunt active power filters (APFs) in microgrids to compensate voltage harmonics in a coordinated way. For this, a hierarchical control structure is proposed that includes two control levels. The primary (local...

  3. A Wireless Power Sharing Control Strategy for Hybrid Energy Storage Systems in DC Microgrids

    DEFF Research Database (Denmark)

    Yang, Jie; Jin, Xinmin; Wu, Xuezhi

    2017-01-01

    In order to compensate multiple time scales power fluctuation resulted from distributed energy resources and loads, hybrid energy storage systems are employed as the buffer unit in DC microgrid. In this paper, a wireless hierarchical control strategy is proposed to realize power sharing between...

  4. Frequency control in power systems with high wind power penetration

    Energy Technology Data Exchange (ETDEWEB)

    Tarnowski, German Claudio [Technical Univ. of Denmark (Denmark). Centre for Electric Technology; Vestas Wind Systems A/S, Alsve (Denmark); Kjaer, Philip Carne [Vestas Wind Systems A/S, Alsve (Denmark); Oestergaard, Jacob [Technical Univ. of Denmark (Denmark). Centre for Electric Technology; Soerensen, Poul E. [Risoe National Laboratory for Sustainable Energy, Roskilde (Denmark). Wind Energy Dept.

    2010-07-01

    The fluctuating nature of wind power introduces several challenges to reliable operation of power system. With high wind power penetration, conventional power plants are displaced and wind speed fluctuations introduce large power imbalances which lead to power system frequency control and operational problems. This paper analysis the impact of wind power in the frequency control of power systems for different amount of controllable variable speed wind turbines. Real measurements from short term wind power penetration tests in a power system are shown and used to study the amount of total regulating power needed from conventional power plants. Dynamic simulations with validated model of the power system support the studies. The paper also presents control concepts for wind power plants necessary to achieve characteristic of frequency response and active power balancing similarly to conventional power plants, therefore allowing higher wind power penetration. As the power system dependency on wind power increases, wind power generation has to contribute with dynamic response and control actions similarly to conventional power plants. (orig.)

  5. A Hierarchical Fuzzy Control Design for Indoor Mobile Robot

    Directory of Open Access Journals (Sweden)

    Foudil Abdessemed

    2014-03-01

    Full Text Available This paper presents a motion control for an autonomous robot navigation using fuzzy logic motion control and stereo vision based path-planning module. This requires the capability to maneuver in a complex unknown environment. The mobile robot uses intuitive fuzzy rules and is expected to reach a specific target or follow a prespecified trajectory while moving among unforeseen obstacles. The robot's mission depends on the choice of the task. In this paper, behavioral-based control architecture is adopted, and each local navigational task is analyzed in terms of primitive behaviors. Our approach is systematic and original in the sense that some of the fuzzy rules are not triggered in face of critical situations for which the stere

  6. Hierarchical Model Predictive Control for Sustainable Building Automation

    Directory of Open Access Journals (Sweden)

    Barbara Mayer

    2017-02-01

    Full Text Available A hierarchicalmodel predictive controller (HMPC is proposed for flexible and sustainable building automation. The implications of a building automation system for sustainability are defined, and model predictive control is introduced as an ideal tool to cover all requirements. The HMPC is presented as a development suitable for the optimization of modern buildings, as well as retrofitting. The performance and flexibility of the HMPC is demonstrated by simulation studies of a modern office building, and the perfect interaction with future smart grids is shown.

  7. Power Control in Multi-Layer Cellular Networks

    CERN Document Server

    Davaslioglu, Kemal

    2012-01-01

    We investigate the possible performance gains of power control in multi-layer cellular systems where microcells and picocells are distributed within macrocells. Although multilayers in cellular networks help increase system capacity and coverage, and can reduce total energy consumption; they cause interference, reducing the performance of the network. Therefore, downlink transmit power levels of multi-layer hierarchical cellular networks need to be controlled in order to fully exploit their benefits. In this work, we present an analytical derivation to determine optimum power levels for two-layer cellular networks and generalize our solution to multi-layer cellular networks. We also simulate our results in a typical multi-layer network setup and observe significant power savings compared to single-layer cellular networks.

  8. On the hierarchical risk-averse control problems for diffusion processes

    OpenAIRE

    Befekadu, Getachew K.; Veremyev, Alexander; Pasiliao, Eduardo L.

    2016-01-01

    In this paper, we consider a risk-averse control problem for diffusion processes, in which there is a partition of the admissible control strategy into two decision-making groups (namely, the {\\it leader} and {\\it follower}) with different cost functionals and risk-averse satisfactions. Our approach, based on a hierarchical optimization framework, requires that a certain level of risk-averse satisfaction be achieved for the {\\it leader} as a priority over that of the {\\it follower's} risk-ave...

  9. Hierarchical control of procedural and declarative category-learning systems.

    Science.gov (United States)

    Turner, Benjamin O; Crossley, Matthew J; Ashby, F Gregory

    2017-02-16

    Substantial evidence suggests that human category learning is governed by the interaction of multiple qualitatively distinct neural systems. In this view, procedural memory is used to learn stimulus-response associations, and declarative memory is used to apply explicit rules and test hypotheses about category membership. However, much less is known about the interaction between these systems: how is control passed between systems as they interact to influence motor resources? Here, we used fMRI to elucidate the neural correlates of switching between procedural and declarative categorization systems. We identified a key region of the cerebellum (left Crus I) whose activity was bidirectionally modulated depending on switch direction. We also identified regions of the default mode network (DMN) that were selectively connected to left Crus I during switching. We propose that the cerebellum-in coordination with the DMN-serves a critical role in passing control between procedural and declarative memory systems.

  10. Linear Logic Validation and Hierarchical Modeling for Interactive Storytelling Control

    OpenAIRE

    Dang, Kim Dung; Pham, Phuong Thao; Champagnat, Ronan; Rabah, Mourad

    2013-01-01

    International audience; The games are typical interactive applications where the system has to react to user actions and behavior with respect to some predefined rules established by the designer. The storytelling allows the interactive system to unfold the scenario of the game story according to these inputs and constraints. In order to improve system's behavior, the scenario should be structured and the system's control should be validated. In this paper, we deal with these two issues. We f...

  11. Power system dynamics and control

    CERN Document Server

    Kwatny, Harry G

    2016-01-01

    This monograph explores a consistent modeling and analytic framework that provides the tools for an improved understanding of the behavior and the building of efficient models of power systems. It covers the essential concepts for the study of static and dynamic network stability, reviews the structure and design of basic voltage and load-frequency regulators, and offers an introduction to power system optimal control with reliability constraints. A set of Mathematica tutorial notebooks providing detailed solutions of the examples worked-out in the text, as well as a package that will enable readers to work out their own examples and problems, supplements the text. A key premise of the book is that the design of successful control systems requires a deep understanding of the processes to be controlled; as such, the technical discussion begins with a concise review of the physical foundations of electricity and magnetism. This is followed by an overview of nonlinear circuits that include resistors, inductors, ...

  12. Naturalizing sense of agency with a hierarchical event-control approach.

    Directory of Open Access Journals (Sweden)

    Devpriya Kumar

    Full Text Available Unraveling the mechanisms underlying self and agency has been a difficult scientific problem. We argue for an event-control approach for naturalizing the sense of agency by focusing on the role of perception-action regularities present at different hierarchical levels and contributing to the sense of self as an agent. The amount of control at different levels of the control hierarchy determines the sense of agency. The current study investigates this approach in a set of two experiments using a scenario containing multiple agents sharing a common goal where one of the agents is partially controlled by the participant. The participant competed with other agents for achieving the goal and subsequently answered questions on identification (which agent was controlled by the participant, the degree to which they are confident about their identification (sense of identification and the degree to which the participant believed he/she had control over his/her actions (sense of authorship. Results indicate a hierarchical relationship between goal-level control (higher level and perceptual-motor control (lower level for sense of agency. Sense of identification ratings increased with perceptual-motor control when the goal was not completed but did not vary with perceptual-motor control when the goal was completed. Sense of authorship showed a similar interaction effect only in experiment 2 that had only one competing agent unlike the larger number of competing agents in experiment 1. The effect of hierarchical control can also be seen in the misidentification pattern and misidentification was greater with the agent affording greater control. Results from the two studies support the event-control approach in understanding sense of agency as grounded in control. The study also offers a novel paradigm for empirically studying sense of agency and self.

  13. GOTHIC: Gravitational oct-tree code accelerated by hierarchical time step controlling

    CERN Document Server

    Miki, Yohei

    2016-01-01

    The tree method is a widely implemented algorithm for collisionless $N$-body simulations in astrophysics well suited for GPU(s). Adopting hierarchical time stepping can accelerate $N$-body simulations; however, it is infrequently implemented and its potential remains untested in GPU implementations. We have developed a Gravitational Oct-Tree code accelerated by HIerarchical time step Controlling named \\texttt{GOTHIC}, which adopts both the tree method and the hierarchical time step. The code adopts some adaptive optimizations by monitoring the execution time of each function on-the-fly and minimizes the time-to-solution by balancing the measured time of multiple functions. Results of performance measurements with realistic particle distribution performed on NVIDIA Tesla M2090, K20X, and GeForce GTX TITAN X, which are representative GPUs of the Fermi, Kepler, and Maxwell generation of GPUs, show that the hierarchical time step achieves a speedup by a factor of around 3--5 times compared to the shared time step...

  14. GOTHIC: Gravitational oct-tree code accelerated by hierarchical time step controlling

    Science.gov (United States)

    Miki, Yohei; Umemura, Masayuki

    2017-04-01

    The tree method is a widely implemented algorithm for collisionless N-body simulations in astrophysics well suited for GPU(s). Adopting hierarchical time stepping can accelerate N-body simulations; however, it is infrequently implemented and its potential remains untested in GPU implementations. We have developed a Gravitational Oct-Tree code accelerated by HIerarchical time step Controlling named GOTHIC, which adopts both the tree method and the hierarchical time step. The code adopts some adaptive optimizations by monitoring the execution time of each function on-the-fly and minimizes the time-to-solution by balancing the measured time of multiple functions. Results of performance measurements with realistic particle distribution performed on NVIDIA Tesla M2090, K20X, and GeForce GTX TITAN X, which are representative GPUs of the Fermi, Kepler, and Maxwell generation of GPUs, show that the hierarchical time step achieves a speedup by a factor of around 3-5 times compared to the shared time step. The measured elapsed time per step of GOTHIC is 0.30 s or 0.44 s on GTX TITAN X when the particle distribution represents the Andromeda galaxy or the NFW sphere, respectively, with 224 = 16,777,216 particles. The averaged performance of the code corresponds to 10-30% of the theoretical single precision peak performance of the GPU.

  15. Hierarchical Control with Virtual Resistance Optimization for Efficiency Enhancement and State-of-Charge Balancing in DC Microgrids

    DEFF Research Database (Denmark)

    Meng, Lexuan; Dragicevic, Tomislav; Quintero, Juan Carlos Vasquez

    2015-01-01

    This paper proposes a hierarchical control scheme which applies optimization method into DC microgrids in order to improve the system overall efficiency while considering the State-of-Charge (SoC) balancing at the same time. Primary droop controller, secondary voltage restoration controller...... and tertiary optimization tool formulate the complete hierarchical control system. Virtual resistances are taken as the decision variables for achieving the objective. simulation results are presented to verify the proposed approach....

  16. Control of entity interactions in a hierarchical variable resolution simulation

    Energy Technology Data Exchange (ETDEWEB)

    Powell, D.R.

    1997-10-01

    There has long been interest in variable resolution modeling to support military analysis for a broad range of interest areas. Despite the ever-present desire for models of greater fidelity at the expense of analysis and computation resources, models of moderate to low fidelity are still required at many levels of decision-making. Problems can arise due to the issue of consistency among the family of models used for analysis. To address this and other problems, models of variable resolution have been suggested. However, such variable resolution architectures inherently carry their own set of issues which must be resolved in order to be useful. First, what are the structural requirements for a variable resolution model; and second, how are interactions between entities governed, especially when the entities have different resolutions? This paper addresses these issues and discusses key mechanisms needed to develop a variable resolution combat simulation that meets several core requirements for such models: seamless aggregation/disaggregation, appropriate interactions between entities of differing resolution, and control of the aggregation/disaggregation process.

  17. Control of entity interactions in a hierarchical variable resolution simulation

    Energy Technology Data Exchange (ETDEWEB)

    Powell, D.R.

    1997-08-01

    There has long been interest in variable resolution modeling to support military analysis for a broad range of interest areas. Despite the ever-present desire for models of greater fidelity at the expense of analysis and computation resources, models of moderate to low fidelity are still required at many levels of decision-making. Problems can arise due to the issue of consistency among the family of models used for analysis. To address this and other problems, models of variable resolution have been suggested. However, such variable resolution architectures inherently carry their own set of issues which must be resolved in order to be useful. First, what are the structural requirements for a variable resolution model; and second, how are interactions between entities governed, especially when the entities have different resolutions? This paper addresses these issues and discusses key mechanisms needed to develop a variable resolution combat simulation that meets several core requirements for such models: seamless aggregation/disaggregation, appropriate interactions between entities of differing resolution, and control of the aggregation/disaggregation process.

  18. Bioactive Hierarchical Structures for Genetic Control of Bone Morphogenesis

    Directory of Open Access Journals (Sweden)

    Pilar Sepulveda

    2002-09-01

    Full Text Available For thirty years it has been known that certain compositions of Na2O-CaO-P2O5-SiO 2 glasses will form a mechanically strong, chemical bond to bone. These materials have become known as bioactive glasses and the process of bonding is called bioactive fixation. Bioactive glasses are widely used clinically in the repair of bone defects. Recent research at the Imperial College Tissue Engineering Centre has now established that there is a genetic control of the cellular response to bioactive materials. Seven families of genes are up-regulated when primary human osteoblasts are exposed to the ionic dissolution products of bioactive glasses. The gene expression occurs very rapidly, within two days, and includes enhanced expression of cell cycle regulators. The consequence is rapid differentiation of the osteoblasts into a mature phenotype and formation of large three-dimensional bone nodules within six days in vitro. These cell culture results correlate with extensive human clinical results using the same bioactive material. The new genetic theory of bioactive materials provides a scientific foundation for molecular design of new generation of resorbable bioactive materials for tissue engineering and in situ tissue regeneration and repair. Application of this theory to the synthesis of bioactive foams for tissue engineering of bone is described.

  19. Hierarchical Control and Skilled Typing: Evidence for Word-Level Control over the Execution of Individual Keystrokes

    Science.gov (United States)

    Crump, Matthew J. C.; Logan, Gordon D.

    2010-01-01

    Routine actions are commonly assumed to be controlled by hierarchically organized processes and representations. In the domain of typing theories, word-level information is assumed to activate the constituent keystrokes required to type each letter in a word. We tested this assumption directly using a novel single-letter probe technique. Subjects…

  20. Distributed Power Control Network and Green Building Test-Bed for Demand Response in Smart Grid

    Science.gov (United States)

    Sakaguchi, Kei; Nguyen, Van Ky; Tao, Yu; Tran, Gia Khanh; Araki, Kiyomichi

    It is known that demand and supply power balancing is an essential method to operate power delivery system and prevent blackouts caused by power shortage. In this paper, we focus on the implementation of demand response strategy to save power during peak hours by using Smart Grid. It is obviously impractical with centralized power control network to realize the real-time control performance, where a single central controller measures the huge metering data and sends control command back to all customers. For that purpose, we propose a new architecture of hierarchical distributed power control network which is scalable regardless of the network size. The sub-controllers are introduced to partition the large system into smaller distributed clusters where low-latency local feedback power control loops are conducted to guarantee control stability. Furthermore, sub-controllers are stacked up in an hierarchical manner such that data are fed back layer-by-layer in the inbound while in the outbound control responses are decentralized in each local sub-controller for realizing the global objectives. Numerical simulations in a realistic scenario of up to 5000 consumers show the effectiveness of the proposed scheme to achieve a desired 10% peak power saving by using off-the-shelf wireless devices with IEEE802.15.4g standard. In addition, a small scale power control system for green building test-bed is implemented to demonstrate the potential use of the proposed scheme for power saving in real life.

  1. Development of Control Structure for Hybrid Wind Generators with Active Power Capability

    Directory of Open Access Journals (Sweden)

    Mehdi Niroomand

    2014-01-01

    Full Text Available A hierarchical control structure is proposed for hybrid energy systems (HES which consist of wind energy system (WES and energy storage system (ESS. The proposed multilevel control structure consists of four blocks: reference generation and mode select, power balancing, control algorithms, and switching control blocks. A high performance power management strategy is used for the system. Also, the proposed system is analyzed as an active power filter (APF with ability to control the voltage, to compensate the harmonics, and to deliver active power. The HES is designed with parallel DC coupled structure. Simulation results are shown for verification of the theoretical analysis.

  2. Design and evaluation of a hierarchical control architecture for an autonomous underwater vehicle

    Institute of Scientific and Technical Information of China (English)

    BIAN Xin-qian; QIN Zheng; YAN Zhe-ping

    2008-01-01

    This paper researches on a kind of control architecture for autonomous underwater vehicle (AUV). After describing the hybrid property of the AUV control system, we present the hierarchical AUV control architecture. The architecture is organized in three layers: mission layer, task layer and execution layer. State supervisor and task coordinator are two key modules handling discrete events, so we describe these two modules in detail. Finally, we carried out a series of tests to verify this architecture. The test results show that the AUV can perform autonomous missions effectively and safely. We can conclude the control architecture is valid and practical.

  3. SOFM Neural Network Based Hierarchical Topology Control for Wireless Sensor Networks

    OpenAIRE

    2014-01-01

    Well-designed network topology provides vital support for routing, data fusion, and target tracking in wireless sensor networks (WSNs). Self-organization feature map (SOFM) neural network is a major branch of artificial neural networks, which has self-organizing and self-learning features. In this paper, we propose a cluster-based topology control algorithm for WSNs, named SOFMHTC, which uses SOFM neural network to form a hierarchical network structure, completes cluster head selection by the...

  4. Solar powered actuator with continuously variable auxiliary power control

    Science.gov (United States)

    Nola, F. J. (Inventor)

    1984-01-01

    A solar powered system is disclosed in which a load such as a compressor is driven by a main induction motor powered by a solar array. An auxiliary motor shares the load with the solar powered motor in proportion to the amount of sunlight available, is provided with a power factor controller for controlling voltage applied to the auxiliary motor in accordance with the loading on that motor. In one embodiment, when sufficient power is available from the solar cell, the auxiliary motor is driven as a generator by excess power from the main motor so as to return electrical energy to the power company utility lines.

  5. Hierarchical Decentralized Control Strategy for Demand-Side Primary Frequency Response

    Energy Technology Data Exchange (ETDEWEB)

    Lian, Jianming; Hansen, Jacob; Marinovici, Laurentiu D.; Kalsi, Karanjit

    2016-07-21

    The Grid Friendly$^\\textrm{TM}$ Appliance~(GFA) controller, developed at Pacific Northwest National Laboratory, was designed for the purpose of autonomously switching off appliances by detecting under-frequency events. In this paper, a new frequency responsive load~(FRL) controller is first proposed by extending the functionality of the original GFA controller. The proposed FRL controller can autonomously switch on (or off) end-use loads by detecting over-frequency (or under-frequency) events through local frequency measurement. Then, a hierarchical decentralized control framework is developed for engaging the end-use loads to provide primary frequency response with the proposed FRL controller. The developed framework has several important features that are desirable in terms of providing primary frequency control. It not only exclusively maintains the autonomous operation of the end-use loads, but also effectively overcomes the stability issue associated with high penetration of FRLs. The simulation results illustrate the effectiveness of the developed hierarchical control framework for providing primary frequency response with the proposed FRL controller.

  6. Hierarchical robot control structure and Newton's divided difference approach to robot path planning

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A hierarchical robot control is proposed for robot soccer system. The Newton' s divided difference is utilized in robot path planning. This paper describes the problems encoutered, software design considerations, vision algorithm and controls of individual robots. The solutions.to the problems implemented are simple and di rect. It is observed that many of the ideas and solutions can be evolved based on simple theories and concepts. This paper focuses on software structure of multi-agent controls, vision algorithm and simple path planning method.

  7. Automated power management and control

    Science.gov (United States)

    Dolce, James L.

    1991-01-01

    A comprehensive automation design is being developed for Space Station Freedom's electric power system. A joint effort between NASA's Office of Aeronautics and Exploration Technology and NASA's Office of Space Station Freedom, it strives to increase station productivity by applying expert systems and conventional algorithms to automate power system operation. The initial station operation will use ground-based dispatches to perform the necessary command and control tasks. These tasks constitute planning and decision-making activities that strive to eliminate unplanned outages. We perceive an opportunity to help these dispatchers make fast and consistent on-line decisions by automating three key tasks: failure detection and diagnosis, resource scheduling, and security analysis. Expert systems will be used for the diagnostics and for the security analysis; conventional algorithms will be used for the resource scheduling.

  8. Active Power Controls from Wind Power: Bridging the Gaps

    Energy Technology Data Exchange (ETDEWEB)

    Ela, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gevorgian, V. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Fleming, P. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zhang, Y. C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Singh, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Muljadi, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Scholbrook, A. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Aho, J. [Univ. of Colorado, Boulder, CO (United States); Buckspan, A. [Univ. of Colorado, Boulder, CO (United States); Pao, L. [Univ. of Colorado, Boulder, CO (United States); Singhvi, V. [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Tuohy, A. [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Pourbeik, P. [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Brooks, D. [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Bhatt, N. [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States)

    2014-01-01

    This paper details a comprehensive study undertaken by the National Renewable Energy Laboratory, Electric Power Research Institute, and the University of Colorado to understand how the contribution of wind power providing active power control (APC) can benefit the total power system economics, increase revenue streams, improve the reliability and security of the power system, and provide superior and efficient response while reducing any structural and loading impacts that may reduce the life of the wind turbine or its components. The study includes power system simulations, control simulations, and actual field tests using turbines at NREL's National Wind Technology Center (NWTC). The study focuses on synthetic inertial control, primary frequency control, and automatic generation control, and analyzes timeframes ranging from milliseconds to minutes to the lifetime of wind turbines, locational scope ranging from components of turbines to large wind plants to entire synchronous interconnections, and additional topics ranging from economics to power system engineering to control design.

  9. Hierarchical LiFePO4 with a controllable growth of the (010) facet for lithium-ion batteries.

    Science.gov (United States)

    Guo, Binbin; Ruan, Hongcheng; Zheng, Cheng; Fei, Hailong; Wei, Mingdeng

    2013-09-27

    Hierarchically structured LiFePO4 was successfully synthesized by ionic liquid solvothermal method. These hierarchically structured LiFePO4 samples were constructed from nanostructured platelets with their (010) facets mainly exposed. To the best of our knowledge, facet control of a hierarchical LiFePO4 crystal has not been reported yet. Based on a series of experimental results, a tentative mechanism for the formation of these hierarchical structures was proposed. After these hierarchically structured LiFePO4 samples were coated with a thin carbon layer and used as cathode materials for lithium-ion batteries, they exhibited excellent high-rate discharge capability and cycling stability. For instance, a capacity of 95% can be maintained for the LiFePO4 sample at a rate as high as 20 C, even after 1000 cycles.

  10. Hierarchical rule-based monitoring and fuzzy logic control for neuromuscular block.

    Science.gov (United States)

    Shieh, J S; Fan, S Z; Chang, L W; Liu, C C

    2000-01-01

    The important task for anaesthetists is to provide an adequate degree of neuromuscular block during surgical operations, so that it should not be difficult to antagonize at the end of surgery. Therefore, this study examined the application of a simple technique (i.e., fuzzy logic) to an almost ideal muscle relaxant (i.e., rocuronium) at general anaesthesia in order to control the system more easily, efficiently, intelligently and safely during an operation. The characteristics of neuromuscular blockade induced by rocuronium were studied in 10 ASA I or II adult patients anaesthetized with inhalational (i.e., isoflurane) anaesthesia. A Datex Relaxograph was used to monitor neuromuscular block. And, ulnar nerve was stimulated supramaximally with repeated train-of-four via surface electrodes at the wrist. Initially a notebook personal computer was linked to a Datex Relaxograph to monitor electromyogram (EMG) signals which had been pruned by a three-level hierarchical structure of filters in order to design a controller for administering muscle relaxants. Furthermore, a four-level hierarchical fuzzy logic controller using the fuzzy logic and rule of thumb concept has been incorporated into the system. The Student's test was used to compare the variance between the groups. p control of muscle relaxation with a mean T1% error of -0.19 (SD 0.66) % accommodating a range in mean infusion rate (MIR) of 0.21-0.49 mg x kg(-1) x h(-1). When these results were compared with our previous ones using the same hierarchical structure applied to mivacurium, less variation in the T1% error (p controller activity of these two drugs showed no significant difference (p > 0.5). However, the consistent medium coefficient variance (CV) of the MIR of both rocuronium (i.e., 36.13 (SD 9.35) %) and mivacurium (i.e., 34.03 (SD 10.76) %) indicated a good controller activity. The results showed that a hierarchical rule-based monitoring and fuzzy logic control architecture can provide stable control

  11. A distributed control approach for power and energy management in a notional shipboard power system

    Science.gov (United States)

    Shen, Qunying

    The main goal of this thesis is to present a power control module (PCON) based approach for power and energy management and to examine its control capability in shipboard power system (SPS). The proposed control scheme is implemented in a notional medium voltage direct current (MVDC) integrated power system (IPS) for electric ship. To realize the control functions such as ship mode selection, generator launch schedule, blackout monitoring, and fault ride-through, a PCON based distributed power and energy management system (PEMS) is developed. The control scheme is proposed as two-layer hierarchical architecture with system level on the top as the supervisory control and zonal level on the bottom as the decentralized control, which is based on the zonal distribution characteristic of the notional MVDC IPS that was proposed as one of the approaches for Next Generation Integrated Power System (NGIPS) by Norbert Doerry. Several types of modules with different functionalities are used to derive the control scheme in detail for the notional MVDC IPS. Those modules include the power generation module (PGM) that controls the function of generators, the power conversion module (PCM) that controls the functions of DC/DC or DC/AC converters, etc. Among them, the power control module (PCON) plays a critical role in the PEMS. It is the core of the control process. PCONs in the PEMS interact with all the other modules, such as power propulsion module (PPM), energy storage module (ESM), load shedding module (LSHED), and human machine interface (HMI) to realize the control algorithm in PEMS. The proposed control scheme is implemented in real time using the real time digital simulator (RTDS) to verify its validity. To achieve this, a system level energy storage module (SESM) and a zonal level energy storage module (ZESM) are developed in RTDS to cooperate with PCONs to realize the control functionalities. In addition, a load shedding module which takes into account the reliability

  12. Centralised power control of wind farm, with doubly fed induction generators

    DEFF Research Database (Denmark)

    Hansen, Anca Daniela; Sørensen, Poul; Iov, Florin;

    2006-01-01

    At the moment, the control ability of wind farms is a prime research concern for the grid integration of large wind farms, due to their required active role in the power system. This paper describes the on-going work of a research project, whose overall objective is to analyse and assess...... to regulate the wind farm power production to the reference power ordered by the system operators. The presented wind farm control has a hierarchical structure with both a central control level and a local control level. The central wind farm control level controls the power production of the whole farm...... by sending out reference power signals to each individual wind turbine, while the local wind turbine control level ensures that the reference power signal send by the central control level is reached. The performance of the control strategy is assessed and discussed by means of simulations illustrated both...

  13. Centralised power control of wind farm with doubly fed induction generators

    DEFF Research Database (Denmark)

    Hansen, A.D.; Sørensen, Poul Ejnar; Iov, F.;

    2006-01-01

    At the moment, the control ability of wind farms is a prime research concern for the grid integration of large wind farms, due to their required active role in the power system. This paper describes the on-going work of a research project, whose overall objective is to analyse and assess...... to regulate the wind farm power production to the reference power ordered by the system operators. The presented wind farm control has a hierarchical structure with both a central control level and a local control level. The central wind farm control level controls the power production of the whole farm...... by sending out reference power signals to each individual wind turbine, while the local wind turbine control level ensures that the reference power signal send by the central control level is reached. The performance of the control strategy is assessed and discussed by means of simulations illustrated both...

  14. Periodic Control of Power Electronic Converters

    DEFF Research Database (Denmark)

    Zhou, Keliang; Danwei, Wang; Yang, Yongheng

    Advanced power electronic converters convert, control and condition electricity. Power converters require control strategies for periodic signal compensation to assure good power quality and stable power system operation. This comprehensive text presents the most recent internal model principle...... based periodic control technology, which offers the perfect periodic control solution for power electronic conversion. It also provides complete analysis and synthesis methods for periodic control systems, and plenty of practical examples to demonstrate the validity of proposed periodic control...... technology for power converters. It proposes a unified framework for housing periodic control schemes for power converters, and provides a general proportional-integral-derivative control solution to periodic signal compensation in extensive engineering applications. Periodic Control of Power Electronic...

  15. Controlled Synthesis and Ferrimagnetism of Homogeneous Hierarchical CoFe2O4 Particles

    Science.gov (United States)

    Long, Nguyen Viet; Yang, Yong; Thi, Cao Minh; Phuc, Le Hong; Lu, Le Trong; Nogami, Masayuki

    2017-10-01

    Uniform, large, spherical, hierarchical CoFe2O4 spinel particles have been successfully prepared by a modified polyol method using NaBH4 and NaOH, revealing controlled size, shape, and morphology with high crystallinity in a certain microscale range. Their inverse AB2O4-type crystal structure was intensively studied by x-ray diffraction (XRD) analysis and scanning electron microscopy (SEM). Using stock solutions of CoCl2 and FeCl3 precursors in 1:2 ratio, CoFe2O4 particles were formed well with high crystallinity in the best inverse spinel structure in space group Fd-3m. The fascinating ferrimagnetic and hysteretic properties of the as-prepared hierarchical CoFe2O4 spinel particles were investigated by vibrating-sample magnetometry (VSM) at room temperature (RT). The results confirm formation of hierarchical CoFe2O4 microscale particles with inverse-spinel AB2O4-type structure and high magnetization by modified polyol method with heat treatment.

  16. Directed assembly of bio-inspired hierarchical materials with controlled nanofibrillar architectures

    Science.gov (United States)

    Tseng, Peter; Napier, Bradley; Zhao, Siwei; Mitropoulos, Alexander N.; Applegate, Matthew B.; Marelli, Benedetto; Kaplan, David L.; Omenetto, Fiorenzo G.

    2017-05-01

    In natural systems, directed self-assembly of structural proteins produces complex, hierarchical materials that exhibit a unique combination of mechanical, chemical and transport properties. This controlled process covers dimensions ranging from the nano- to the macroscale. Such materials are desirable to synthesize integrated and adaptive materials and systems. We describe a bio-inspired process to generate hierarchically defined structures with multiscale morphology by using regenerated silk fibroin. The combination of protein self-assembly and microscale mechanical constraints is used to form oriented, porous nanofibrillar networks within predesigned macroscopic structures. This approach allows us to predefine the mechanical and physical properties of these materials, achieved by the definition of gradients in nano- to macroscale order. We fabricate centimetre-scale material geometries including anchors, cables, lattices and webs, as well as functional materials with structure-dependent strength and anisotropic thermal transport. Finally, multiple three-dimensional geometries and doped nanofibrillar constructs are presented to illustrate the facile integration of synthetic and natural additives to form functional, interactive, hierarchical networks.

  17. Power inverter implementing phase skipping control

    Science.gov (United States)

    Somani, Utsav; Amirahmadi, Ahmadreza; Jourdan, Charles; Batarseh, Issa

    2016-10-18

    A power inverter includes a DC/AC inverter having first, second and third phase circuitry coupled to receive power from a power source. A controller is coupled to a driver for each of the first, second and third phase circuitry (control input drivers). The controller includes an associated memory storing a phase skipping control algorithm, wherein the controller is coupled to receive updating information including a power level generated by the power source. The drivers are coupled to control inputs of the first, second and third phase circuitry, where the drivers are configured for receiving phase skipping control signals from the controller and outputting mode selection signals configured to dynamically select an operating mode for the DC/AC inverter from a Normal Control operation and a Phase Skipping Control operation which have different power injection patterns through the first, second and third phase circuitry depending upon the power level.

  18. Advanced Coordinating Control System for Power Plant

    Institute of Scientific and Technical Information of China (English)

    WU Peng; WEI Shuangying

    2006-01-01

    The coordinating control system is popular used in power plant. This paper describes the advanced coordinating control by control methods and optimal operation, introduces their principals and features by using the examples of power plant operation. It is wealthy for automation application in optimal power plant operation.

  19. Power flow control using quadrature boosters

    Science.gov (United States)

    Sadanandan, Sandeep N.

    A power system that can be controlled within security constraints would be an advantage to power planners and real-time operators. Controlling flows can lessen reliability issues such as thermal limit violations, power stability problems, and/or voltage stability conditions. Control of flows can also mitigate market issues by reducing congestion on some lines and rerouting power to less loaded lines or onto preferable paths. In the traditional control of power flows, phase shifters are often used. More advanced methods include using Flexible AC Transmission System (FACTS) Controllers. Some examples include Thyristor Controlled Series Capacitors, Synchronous Series Static Compensators, and Unified Power Flow Controllers. Quadrature Boosters (QBs) have similar structures to phase-shifters, but allow for higher voltage magnitude during real power flow control. In comparison with other FACTS controllers QBs are not as complex and not as expensive. The present study proposes to use QBs to control power flows on a power system. With the inclusion of QBs, real power flows can be controlled to desired scheduled values. In this thesis, the linearized power flow equations used for power flow analysis were modified for the control problem. This included modifying the Jacobian matrix, the power error vector, and calculating the voltage injected by the quadrature booster for the scheduled real power flow. Two scenarios were examined using the proposed power flow control method. First, the power flow in a line in a 5-bus system was modified with a QB using the method developed in this thesis. Simulation was carried out using Matlab. Second, the method was applied to a 30-bus system and then to a 118-bus system using several QBs. In all the cases, the calculated values of the QB voltages led to desired power flows in the designated line.

  20. Power System Stability Enhancement Using Unified Power Flow Controller

    Directory of Open Access Journals (Sweden)

    Prechanon Kumkratug

    2010-01-01

    Full Text Available Problem statement: The enhancement of transient stability of the power system is one of the most challenging research areas in power engineer. Approach: This study presents the method to enhance transient stability of power system by Unified Power Flow Controller (UPFC. The mathematical model of power system equipped with a UPFC is systematically derived. The parameters of UPFC are modeled into power flow equation and thus it is used to determine control strategy. The swing curves of the three phase faulted power system without and with a UPFC are tested and compared in various cases. Results: The swing curve of system without a UPFC gets increases monotonically and thus the system can be considered as unstable whereas the swing curves of system with a UPFC can return to stable equilibrium point. Conclusion: From the simulation results, the UPFC can enhance transient stability of power system.

  1. Human performance in monitoring and controlling hierarchical large-scale systems

    Energy Technology Data Exchange (ETDEWEB)

    Henneman, R.L.; Rouse, W.B.

    1984-03-01

    Human performance in monitoring and controlling activities in a hierarchical large-scale network, such as a communications system, is considered. A scenario is described that is used in an experiment to examine three factors affecting humans functioning as network supervisor: cluster size (number of elements per display page), number of levels of pages in the hierarchy, and failure rate per element. It is indicated by the results that increasing cluster size improves performance, increasing number of levels degrades performance, and failure rate affects only subjects strategies.

  2. Design and Co-simulation of Hierarchical Architecture for Demand Response Control and Coordination

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu Prasad; Lévesque, Martin; Bak-Jensen, Birgitte

    2017-01-01

    Demand response (DR) plays a key role for optimum asset utilization and to avoid or delay the need of new infrastructure investment. However, coordinated execution of multiple DRs is desired to maximize the DR benefits. In this study, we propose a hierarchical DR architecture (HDRA) to control...... and coordinate the performance of various DR categories such that the operation of every DR category is backed-up by time delayed action of the others. A reliable, cost-effective communication infrastructure based on ZigBee, WiMAX, and fibers is designed to facilitate the HDRA execution. The performance...

  3. The electric power engineering handbook power system stability and control

    CERN Document Server

    Grisby, Leonard L

    2012-01-01

    With contributions from worldwide leaders in the field, Power System Stability and Control, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) updates coverage of recent developments and rapid technological growth in essential aspects of power systems. Edited by L.L. Grigsby, a respected and accomplished authority in power engineering, and section editors Miroslav Begovic, Prabha Kundur, and Bruce Wollenberg, this reference presents substantially new and revised content. Topics covered include: * Power System Protection * Power System Dynamics and Stability *

  4. Power flow control schemes for series-connected FACTS controllers

    Energy Technology Data Exchange (ETDEWEB)

    Ye, Yang; Kazerani, Mehrdad [University of Waterloo, Department of Electrical & amp; Computer Engineering, Waterloo, Ont. (Canada N2L 3G1)

    2006-06-15

    Unified power flow controller (UPFC) and interline power flow controller (IPFC) are FACTS devices that can control the power flow in transmission lines by injecting active and reactive voltage components in series with the lines, using power converter modules, based on an externally regulated dc-link voltage. One key issue, in this application, is to find a relationship between the injected voltage and the resulting power flow in the line. In this paper, this relationship is derived analytically, and used to design two power flow control schemes. The proposed control schemes are applicable to any series-connected FACTS controller with the capability of producing a controllable voltage. In this paper, the proposed power flow control schemes are applied to a voltage-sourced converter-based IPFC, and the resulting control performances are examined using PSCAD/EMTDC simulation package. The simulation results show the effectiveness of the proposed power flow control schemes. (author)

  5. Serial grey-box model of a stratified thermal tank for hierarchical control of a solar plant

    Energy Technology Data Exchange (ETDEWEB)

    Arahal, Manuel R. [Universidad de Sevilla, Dpto. de Ingenieria de Sistemas y Automatica, Camino de los Descubrimientos s/n, 41092 Sevilla (Spain); Cirre, Cristina M. [Convenio Universidad de Almeria-Plataforma Solar de Almeria, Ctra. Senes s/n, 04200 Tabernas, Almeria (Spain); Berenguel, Manuel [Universidad de Almeria, Dpto. Lenguajes y Computacion, Ctra. Sacramento s/n, 04120, Almeria (Spain)

    2008-05-15

    The ACUREX collector field together with a thermal storage tank and a power conversion system forms the Small Solar Power Systems plant of the Plataforma Solar de Almeria, a facility that has been used for research for the last 25 years. A simulator of the collector field produced by the last author has been available to and used as a test-bed for control strategies. Up to now, however, there is not a model for the whole plant. Such model is needed for hierarchical control schemes also proposed by the authors. In this paper a model of the thermal storage tank is derived using the Simultaneous Perturbation Stochastic Approximation technique to adjust the parameters of a serial grey-box model structure. The benefits of the proposed approach are discussed in the context of the intended use, requiring a model capable of simulating the behavior of the storage tank with low computational load and low error over medium to large horizons. The model is tested against real data in a variety of situations showing its performance in terms of simulation error in the temperature profile and in the usable energy stored in the tank. The results obtained demonstrate the viability of the proposed approach. (author)

  6. Microgrid Central Controller Development and Hierarchical Control Implementation in the Intelligent MicroGrid Lab of Aalborg University

    DEFF Research Database (Denmark)

    Meng, Lexuan; Savaghebi, Mehdi; Andrade, Fabio

    2015-01-01

    This paper presents the development of a microgrid central controller in an inverter-based intelligent microgrid (iMG) lab in Aalborg University, Denmark. The iMG lab aims to provide a flexible experimental platform for comprehensive studies of microgrids. The complete control system applied...... in this lab is based on the hierarchical control scheme for microgrids and includes primary, secondary and tertiary control. The structure of the lab, including the lab facilities, configurations and communication network, is first introduced. Primary control loops are developed in MATLAB....../Simulink and compiled to dSPACEs for local control purposes. In order to realize system supervision and proper secondary and tertiary management, a LabVIEW-based microgrid central controller is also developed. The software and hardware schemes are described. An example case is introduced and tested in the iMG lab...

  7. Multicast Address Management and Connection Control Based on Hierarchical Autonomous Structure

    Institute of Scientific and Technical Information of China (English)

    WANG Jian; ZHANG Fuyan

    1999-01-01

    Multicast capability, including multicast address and multicast routing mechanisms, at the network layeris necessary in order to reduce the bandwidth requirements of multiparty, multicast applications. Based on hierarchical autonomous structure in accordance with the self-organization topologies of Internet, the paper puts forward a multicast address management scheme that is shown to be robust and scalable. Connection control hierarchy (CCH) based on master/slave relationship and a simple efficient building algorithm of multi-point connection is also built. The paper also describes the normal operations of multicast address management andmulti-point connection controller. Through simulation experiment, HAM, CM and DDM of Multicast Address Allocation are compared. HAM integrates the merits of CM and DDM, which is efficient as a whole, robust andscalable. CCH raises the efficiency of connection control, and is highly robust, flexible and scalable.

  8. Hierarchical Brokering with Feedback Control Framework in Mobile Device-Centric Clouds

    Directory of Open Access Journals (Sweden)

    Chao-Lieh Chen

    2016-01-01

    Full Text Available We propose a hierarchical brokering architecture (HiBA and Mobile Multicloud Networking (MMCN feedback control framework for mobile device-centric cloud (MDC2 computing. Exploiting the MMCN framework and RESTful web-based interconnection, each tier broker probes resource state of its federation for control and management. Real-time and seamless services were developed. Case studies including intrafederation energy-aware balancing based on fuzzy feedback control and higher tier load balancing are further demonstrated to show how HiBA with MMCN relieves the embedding of algorithms when developing services. Theoretical performance model and real-world experiments both show that an MDC2 based on HiBA features better quality in terms of resource availability and network latency if it federates devices with enough resources distributed in lower tier hierarchy. The proposed HiBA realizes a development platform for MDC2 computing which is a feasible solution to User-Centric Networks (UCNs.

  9. The Next Big Five Inventory (BFI-2): Developing and Assessing a Hierarchical Model With 15 Facets to Enhance Bandwidth, Fidelity, and Predictive Power.

    Science.gov (United States)

    Soto, Christopher J; John, Oliver P

    2016-04-07

    Three studies were conducted to develop and validate the Big Five Inventory-2 (BFI-2), a major revision of the Big Five Inventory (BFI). Study 1 specified a hierarchical model of personality structure with 15 facet traits nested within the Big Five domains, and developed a preliminary item pool to measure this structure. Study 2 used conceptual and empirical criteria to construct the BFI-2 domain and facet scales from the preliminary item pool. Study 3 used data from 2 validation samples to evaluate the BFI-2's measurement properties and substantive relations with self-reported and peer-reported criteria. The results of these studies indicate that the BFI-2 is a reliable and valid personality measure, and an important advance over the original BFI. Specifically, the BFI-2 introduces a robust hierarchical structure, controls for individual differences in acquiescent responding, and provides greater bandwidth, fidelity, and predictive power than the original BFI, while still retaining the original measure's conceptual focus, brevity, and ease of understanding. The BFI-2 therefore offers valuable new opportunities for research examining the structure, assessment, development, and life outcomes of personality traits. (PsycINFO Database Record

  10. Remote Power Control of Ethernet PON System

    Institute of Scientific and Technical Information of China (English)

    Inkwun Jung; Chunghwan Lim; Youngil Park

    2003-01-01

    A power control scheme to make all ONU channels’ power received at OLT nearly equal is proposed. Implemented by monitoring powers at OLT and sending control message to each ONU, it helps data recovery from the burst type upstream optical signals.

  11. A hybrid approach to space power control

    Science.gov (United States)

    Gholdston, E. W.; Janik, D. F.; Newton, K. A.

    1990-01-01

    Conventional control systems have traditionally been utilized for space-based power designs. However, the use of expert systems is becoming important for NASA applications. Rocketdyne has been pursuing the development of expert systems to aid and enhance control designs of space-based power systems. The need for integrated expert systems is vital for the development of autonomous power systems.

  12. Remote Power Control of Ethernet PON System

    Institute of Scientific and Technical Information of China (English)

    Inkwun; Jung; Chunghwan; Lim; Youngil; Park

    2003-01-01

    A power control scheme to make all ONU channels' power received at OLT nearly equal is proposed. Implemented by monitoring powers at OLT and sending control message to each ONU, it helps data recovery from the burst type upstream optical signals.

  13. Conceptual framework for distributed expert-system use in time-sensitive hierarchical control

    Energy Technology Data Exchange (ETDEWEB)

    Henningsen, J.R.

    1987-01-01

    There are many problems faced by decision makers involved in complex, time-sensitive hierarchical control systems. These may include maintaining knowledge of the functional status of the system components, forecasting the impact of past and future events, transferring information to a distant or poorly connected location, changing the requirements for an operation according to resources available, or creating an independent course of action when system connectivity falls. These problems are transdisciplinary in nature, so decision makers in a variety of organizations face them. This research develops a framework for the use of distributed expert systems in support of time-sensitive hierarchical control systems. Attention is focused on determining ways to enhance the likelihood that a system will remain functional during a crisis in which one or more of the system nodes fail. Options in the use of distributed expert systems for this purpose are developed following investigation of related research in the areas of cooperative and distributed systems. A prototype under development of a generic system model called DES (distributed expert systems) is described. DES is a trimular form of support structure, where a trimule is defined to be a combination of a human decision agent, a component system model and an expert system. This concept is an extension of the domular theory of Tenney and Sandell (1981).

  14. Intelligent Hierarchical Modal Control of a Novel Manipulator with Slewing and Deployable Links

    Science.gov (United States)

    Modi, V. J.; Zhang, J.; de Silva, C. W.

    1. Introduction The Space Shuttle based Canada arm has vividly demonstrated its application in launching of satellites as well as retrieval of disabled spacecraft for repair. There have been proposals for free flying robotic systems with appropriate instrumentation to monitor health of spacecraft, identify problems and even perform corrective measures. Most of these applications involve multilink manipulators with revolute joints for which there is a vast body of literature [1]. On the other hand, manipulators with revolute as well as prismatic joints, permitting slewing as well as deployment/retrieval of links, have received relatively little attention [2]. Such variable geometry, snake-like manipulators have distinct advantages of reduced coupling effects leading to simpler equations of motion and inverse kinematics, less number of singularity conditions, and ease of obstacle avoidance [3]. 2. Hierarchical Structure The control system developed for the deployable manipulator has a three-level structure. This hierarchical structure takes the advantages of a crisp controller; specially, a modal controller, with those of a soft, knowledge-based, supervisory control . The overall structure can be separated and developed as three main layers. The first layer is the lowest layer of the control system. It deals with information coming from sensors attached to the plant ( manipulator). This type of information is characterized by a large amount of individual data points of high resolution, produced and collected at high frequency. The crisp controller that is used is a state feedback regulator with its feedback gain matrix determined using the eigenstructure assignment approach. The data processing for monitoring and evaluation of the system performance occurs in this intermediate or second layer. Here high-resolution, crisp data from sensors are filtered to afford representation of the current state of the manipulator. This servo-expert layer acts as an interface

  15. Joint excitation and reactive power control in thermal power plant

    Directory of Open Access Journals (Sweden)

    Dragosavac Jasna

    2013-01-01

    Full Text Available The coordinated voltage and reactive power controller, designed for the thermal power plant, is presented in the paper. A brief explanation of the need for such device is given and justification for commissioning of such equipment is outlined. After short description of the theoretical background of the proposed control design, the achieved features of the commissioned equipment are fully given. Achieved performances are illustrated by recorded reactive power and bus voltage responses after commissioning of the described equipment into the largest thermal power plant in Serbia. As it can be seen in presented records, all design targets are met.

  16. Autonomous power system intelligent diagnosis and control

    Science.gov (United States)

    Ringer, Mark J.; Quinn, Todd M.; Merolla, Anthony

    1991-01-01

    The Autonomous Power System (APS) project at NASA Lewis Research Center is designed to demonstrate the abilities of integrated intelligent diagnosis, control, and scheduling techniques to space power distribution hardware. Knowledge-based software provides a robust method of control for highly complex space-based power systems that conventional methods do not allow. The project consists of three elements: the Autonomous Power Expert System (APEX) for fault diagnosis and control, the Autonomous Intelligent Power Scheduler (AIPS) to determine system configuration, and power hardware (Brassboard) to simulate a space based power system. The operation of the Autonomous Power System as a whole is described and the responsibilities of the three elements - APEX, AIPS, and Brassboard - are characterized. A discussion of the methodologies used in each element is provided. Future plans are discussed for the growth of the Autonomous Power System.

  17. Pool power control in remelting systems

    Science.gov (United States)

    Williamson, Rodney L.; Melgaard, David K.; Beaman, Joseph J.

    2011-12-13

    An apparatus for and method of controlling a remelting furnace comprising adjusting current supplied to an electrode based upon a predetermined pool power reference value and adjusting the electrode drive speed based upon the predetermined pool power reference value.

  18. Hierarchical Velocity Control Based on Differential Flatness for a DC/DC Buck Converter-DC Motor System

    Directory of Open Access Journals (Sweden)

    R. Silva-Ortigoza

    2014-01-01

    Full Text Available This paper presents a hierarchical controller that carries out the angular velocity trajectory tracking task for a DC motor driven by a DC/DC Buck converter. The high level control is related to the DC motor and the low level control is dedicated to the DC/DC Buck converter; both controls are designed via differential flatness. The high level control provides a desired voltage profile for the DC motor to achieve the tracking of a desired angular velocity trajectory. Then, a low level control is designed to ensure that the output voltage of the DC/DC Buck converter tracks the voltage profile imposed by the high level control. In order to experimentally verify the hierarchical controller performance, a DS1104 electronic board from dSPACE and Matlab-Simulink are used. The switched implementation of the hierarchical average controller is accomplished by means of pulse width modulation. Experimental results of the hierarchical controller for the velocity trajectory tracking task show good performance and robustness against the uncertainties associated with different system parameters.

  19. Technical and economic viability of electric power plants on the basis of renewable energy resources regarding hierarchical structure

    Directory of Open Access Journals (Sweden)

    Balzannikov Mikhail

    2017-01-01

    Full Text Available The article deals with power stations working on the basis of non-renewable energy resources and finite resources which will inevitably come to depletion in the future. These installations produce considerable negative impact on the environment, including air pollution. It is noted that considerable amounts of emissions of harmful substances accounts for the share of small thermal installations which aren’t always considered in calculations of pollution. The author specifies that emission reduction of harmful substances should be achieved due to wider use of environmentally friendly renewable energy resources. It is recommended to use hierarchical structure with the priority of ecological and social conditions of the region for technical and economic viability of consumers’ power supply systems and installations, based on renewable energy resources use. At the same time the author suggests considering federal, regional and object levels of viability. It is recommended to consider the main stages of lifecycle of an object for object level: designing, construction, operation, reconstruction of an object and its preservation. The author shows the example of calculation of power plant efficiency, based on renewable energy resources during its reconstruction, followed by power generation increase.

  20. A novel decentralized hierarchical access control scheme for the medical scenario

    DEFF Research Database (Denmark)

    Eskeland, Sigurd; Prasad, Neeli R.

    2006-01-01

    Electronic patient records contains highly personal and confidential information that it is essential to keep private. Thus, only the medical professionals providing care to a patient should access the patient record of the concerning patient. As personal medical data can be considered...... to be the property of the corresponding patient, it is justified that patients should have the opportunity to exert control over their own data. In this paper, we propose a cryptographic access control scheme allowing patients to grant medical teams authorizations to access their medical data. Moreover......, the hierarchical aspects of teams are taken into account so that the modules of the patient record are to be accessed according to the individual privileges of the medical professionals of the team. Thus, more privileged users obtain larger portions of the data than less privileged users....

  1. Coordination of baseload power plant group control with static reactive power compensator control

    Directory of Open Access Journals (Sweden)

    Zbigniew Szczerba

    2012-06-01

    Full Text Available Reactive power sources in power system nodes: generators and static reactive power compensators, are controlled by control systems. Generators – by generator node group controllers, compensators – by voltage controllers. The paper presents issues of these control systems’ coordination and proposals for its implementation.

  2. Power system damping - Structural aspects of controlling active power

    Energy Technology Data Exchange (ETDEWEB)

    Samuelsson, O.

    1997-04-01

    Environmental and economical aspects make it difficult to build new power lines and to reinforce existing ones. The continued growth in demand for electric power must therefore to a great extent be met by increased loading of available lines. A consequence is that power system damping is reduced, leading to a risk of poorly damped power oscillations between the generators. This thesis proposes the use of controlled active loads to increase damping of such electro-mechanical oscillations. The focus is on structural aspects of controller interaction and of sensor and actuator placement. On-off control based on machine frequency in a single machine infinite bus system is analysed using energy function analysis and phase plane plots. An on-off controller with estimated machine frequency as input has been implemented. At a field test it damped oscillations of a 0.9 MW hydro power generator by controlling a 20kW load. The linear analysis uses two power system models with three and twenty-three machines respectively. Each damper has active power as output and local bus frequency or machine frequency as input. The power system simulator EUROSTAG is used both for generation of the linearized models and for time simulations. Measures of active power mode controllability and phase angle mode observability are obtained from the eigenvectors of the differential-algebraic models. The geographical variation in the network of these quantities is illustrated using the resemblance to bending modes of flexible mechanical structures. Eigenvalue sensitivities are used to determine suitable damper locations. A spring-mass equivalent to an inter-area mode provides analytical expressions, that together with the concept of impedance matching explain the structural behaviour of the power systems. For large gains this is investigated using root locus plots. 64 refs, 99 figs, 20 tabs

  3. Power Control Method for Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Baang, Dane; Suh, Yongsuk; Park, Cheol [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    Considering safety-oriented design concept and other control environment, we developed a simple controller that provides limiting function of power change- rate as well as fine tracking performance. The design result has been well-proven via simulation and actual application to a TRIGA-II type research reactor. The proposed controller is designed to track the PDM(Power Demand) from operator input as long as maintaining the power change rate lower than a certain value for stable reactor operation. A power control method for a TRIGA-II type research reactor has been designed, simulated, and applied to actual reactor. The control performance during commissioning test shows that the proposed controller provides fine control performance for various changes in reference values (PDM), even though there is large measurement noise from neutron detectors. The overshoot at low power level is acceptable in a sense of reactor operation.

  4. Controllable synthesis of α-sulfur spheres with hierarchical nanostructures for efficient visible-light-driven photocatalytic ability

    Energy Technology Data Exchange (ETDEWEB)

    Dang, Xueming; Zhang, Xiufang, E-mail: zhangxf@dlpu.edu.cn; Zhang, Weiqiang; Dong, Xiaoli; Wang, Guowen; Ma, Hongchao

    2015-08-30

    Highlights: • α-Sulfur spheres with hierarchical nanostructures are controllably produced. • Addition quantity of PVP affects photocatalytic ability of α-sulfur. • The enhanced photocatalytic ability of α-sulfur hierarchical sphere is found. - Abstract: Visible-light-active α-sulfur spheres with hierarchical nanostructures were fabricated by simple solution-phase synthesis with PVP as the template for enhanced photocatalytic ability. The α-sulfur hierarchical spheres with an ultrahigh specific surface area can controllable synthesized by changing the addition quantity of PVP. The obtained products are systematically studied by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–vis absorption spectroscopy (DRS), Fluorescence (FL) and Brunauer-Emmett-Teller (BET). The photocatalytic activity of the as-prepared samples is evaluated by photocatalytic degradation of Rhodamine B (RhB) aqueous solution under visible light illumination. The results indicate that the morphology, specific surface area, photo absorbance ability, the separation efficiency of photogenerated carriers and the reactant adsorption performance can be controlled by varying the addition quantity of PVP. When 200 mg PVP is added, α-sulfur hierarchical spheres with uniform particle size about 1 μm and ultrahigh specific surface area of 67.1 m{sup 2}/g is obtained, and its photocatalytic activity reaches a maximum value, which can be attributed to the combined effects of photo absorbance ability, the separation efficiency of photogenerated carriers and the reactant adsorption performance.

  5. H-RBAC: A Hierarchical Access Control Model for SaaS Systems

    Directory of Open Access Journals (Sweden)

    Dancheng Li

    2011-08-01

    Full Text Available SaaS is a new way to deploy software as a hosted service and accessed over the Internet which means the customers don’t need to maintain the software code and data on their own servers. So it’s more important for SaaS systems to take security issues into account. Access control is a security mechanism that enables an authority to access to certain restricted areas and resources according to the permissions assigned to a user. Several access models have been proposed to realize the access control of single instance systems. However, most of the existing models couldn’t address the following SaaS system problems: (1 role name conflicts (2 cross-level management (3 the isomerism of tenants' access control (4 temporal delegation constraints. This paper describes a hierarchical RBAC model called H-RBAC solves all the four problems of SaaS systems mentioned above. This model addresses the SaaS system access control in both system level and tenant level. It combines the advantages of RBDM and ARBAC97 model and introduces temporal constraints to SaaS access control model. In addition, a practical approach to implement the access control module for SaaS systems based on H-RBAC model is also proposed in this paper.

  6. Hierarchical structural control of visual properties in self-assembled photonic-plasmonic pigments

    CERN Document Server

    Koay, Natalie; Kay, Theresa M; Nerger, Bryan A; Miles-Rossouw, Malaika; Shirman, Tanya; Vu, Thy L; England, Grant; Phillips, Katherine R; Utech, Stefanie; Vogel, Nicolas; Kolle, Mathias; Aizenberg, Joanna

    2014-01-01

    We present a simple one-pot co-assembly method for the synthesis of hierarchically structured pigment particles consisting of silica inverse-opal bricks that are doped with plasmonic absorbers. We study the interplay between the plasmonic and photonic resonances and their effect on the visual appearance of macroscopic collections of photonic bricks that are distributed in randomized orientations. Manipulating the pore geometry tunes the wavelength- and angle-dependence of the scattering profile, which can be engineered to produce angle-dependent Bragg resonances that can either enhance or contrast with the color produced by the plasmonic absorber. By controlling the overall dimensions of the photonic bricks and their aspect ratios, their preferential alignment can either be encouraged or suppressed. This causes the Bragg resonance to appear either as uniform color travel in the former case or as sparse iridescent sparkle in the later case. By manipulating the surface chemistry of these photonic bricks, which ...

  7. Enforcing Access Control in Virtual Organizations Using Hierarchical Attribute-Based Encryption

    CERN Document Server

    Asim, Muhammad; Petkovic, Milan; Trivellato, Daniel; Zannone, Nicola

    2012-01-01

    Virtual organizations are dynamic, inter-organizational collaborations that involve systems and services belonging to different security domains. Several solutions have been proposed to guarantee the enforcement of the access control policies protecting the information exchanged in a distributed system, but none of them addresses the dynamicity characterizing virtual organizations. In this paper we propose a dynamic hierarchical attribute-based encryption (D-HABE) scheme that allows the institutions in a virtual organization to encrypt information according to an attribute-based policy in such a way that only users with the appropriate attributes can decrypt it. In addition, we introduce a key management scheme that determines which user is entitled to receive which attribute key from which domain authority.

  8. Hierarchical charge distribution controls self-assembly process of silk in vitro

    Science.gov (United States)

    Zhang, Yi; Zhang, Cencen; Liu, Lijie; Kaplan, David L.; Zhu, Hesun; Lu, Qiang

    2015-12-01

    Silk materials with different nanostructures have been developed without the understanding of the inherent transformation mechanism. Here we attempt to reveal the conversion road of the various nanostructures and determine the critical regulating factors. The regulating conversion processes influenced by a hierarchical charge distribution were investigated, showing different transformations between molecules, nanoparticles and nanofibers. Various repulsion and compressive forces existed among silk fibroin molecules and aggregates due to the exterior and interior distribution of charge, which further controlled their aggregating and deaggregating behaviors and finally formed nanofibers with different sizes. Synergistic action derived from molecular mobility and concentrations could also tune the assembly process and final nanostructures. It is suggested that the complicated silk fibroin assembly processes comply a same rule based on charge distribution, offering a promising way to develop silk-based materials with designed nanostructures.

  9. Thyristor Controlled Reactor for Power Factor Improvement

    Directory of Open Access Journals (Sweden)

    Sheila Mahapatra

    2014-04-01

    Full Text Available Power factor improvement is the essence of any power sector for reliable operation. This paper provides Thyristor Controlled Reactor regulated by programmed microcontroller which aids in improving power factor and retaining it close to unity under various loading conditions. The implementation is done on 8051 microcontrollerwhich isprogrammed using Keil software. To determine time lag between current and voltage PSpice softwareis used and to display power factor according tothe variation in loadProteus software is used. Whenever a capacitive load is connected to the transmission linea shunt reactor is connected which injects lagging reactive VARs to the power system. As a result the power factor is improved. The results given in this paper provides suitable microcontroller based reactive power compensation and power factor improvement technique using a Thyristor Controlled Reactor module.

  10. Electric power distribution, automation, protection, and control

    CERN Document Server

    Momoh, James A

    2007-01-01

    * Each Chapter Provides an Introduction, Illustrative Examples, and a SummaryIntroduction to Distribution Automation Systems Historical Background Distribution System Topology and Structure Distribution Automation (DA) and Control Computational Techniques for Distribution Systems Complex Power Concepts Balanced Voltage to Neutral-Connected System Power Relationship for f Y-?-Connected System Per-Unit System Calculation of Power Losses Voltage Regulation Techniques Voltage-Sag Analysis and Calculation Equipment Modeling Components Modeling Distribution System Line Model Distribution Power Flo

  11. Enriching the hierarchical model of achievement motivation: autonomous and controlling reasons underlying achievement goals.

    Science.gov (United States)

    Michou, Aikaterini; Vansteenkiste, Maarten; Mouratidis, Athanasios; Lens, Willy

    2014-12-01

    The hierarchical model of achievement motivation presumes that achievement goals channel the achievement motives of need for achievement and fear of failure towards motivational outcomes. Yet, less is known whether autonomous and controlling reasons underlying the pursuit of achievement goals can serve as additional pathways between achievement motives and outcomes. We tested whether mastery approach, performance approach, and performance avoidance goals and their underlying autonomous and controlling reasons would jointly explain the relation between achievement motives (i.e., fear of failure and need for achievement) and learning strategies (Study 1). Additionally, we examined whether the autonomous and controlling reasons underlying learners' dominant achievement goal would account for the link between achievement motives and the educational outcomes of learning strategies and cheating (Study 2). Six hundred and six Greek adolescent students (Mage = 15.05, SD = 1.43) and 435 university students (Mage M = 20.51, SD = 2.80) participated in studies 1 and 2, respectively. In both studies, a correlational design was used and the hypotheses were tested via path modelling. Autonomous and controlling reasons underlying the pursuit of achievement goals mediated, respectively, the relation of need for achievement and fear of failure to aspects of learning outcomes. Autonomous and controlling reasons underlying achievement goals could further explain learners' functioning in achievement settings. © 2014 The British Psychological Society.

  12. Commercialization of the power factor controller

    Science.gov (United States)

    1981-01-01

    The purpose of the Motor Power Controller, also known as the Power Factor Controller, is to improve power factor and reduce power dissipation in induction motors operating below full load. These purposes were studied and tested in detail. The Motor Power Controller is capable of raising power factors from 0.2 to 0.8 and results in energy savings. It was found that many motors, in their present operating applications, are classified as unstable. The electronic nature of the controller vs. the electrical nature of the motor, compound this problem due to the differences in response time of the two devices. Many tests were successfully completed, the most indicating greater savings than anticipated. Also, there was an effect on efficiency which was not included in the calculations.

  13. A Lyapunov theory based UPFC controller for power flow control

    Energy Technology Data Exchange (ETDEWEB)

    Zangeneh, Ali; Kazemi, Ahad; Hajatipour, Majid; Jadid, Shahram [Center of Excellence for Power Systems Automation and Operation, Iran University of Science and Technology, Tehran (Iran)

    2009-09-15

    Unified power flow controller (UPFC) is the most comprehensive multivariable device among the FACTS controllers. Capability of power flow control is the most important responsibility of UPFC. According to high importance of power flow control in transmission lines, the proper controller should be robust against uncertainty and disturbance and also have suitable settling time. For this purpose, a new controller is designed based on the Lyapunov theory and its stability is also evaluated. The Main goal of this paper is to design a controller which enables a power system to track reference signals precisely and to be robust in the presence of uncertainty of system parameters and disturbances. The performance of the proposed controller is simulated on a two bus test system and compared with a conventional PI controller. The simulation results show the power and accuracy of the proposed controller. (author)

  14. Laser welding closed-loop power control

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    2003-01-01

    A closed-loop control system is developed to maintain an even seam width on the root side of a laser weld by continually controlling the output laser power of a 1500 W CO2 laser.......A closed-loop control system is developed to maintain an even seam width on the root side of a laser weld by continually controlling the output laser power of a 1500 W CO2 laser....

  15. Laser welding closed-loop power control

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    2003-01-01

    A closed-loop control system is developed to maintain an even seam width on the root side of a laser weld by continually controlling the output laser power of a 1500 W CO2 laser.......A closed-loop control system is developed to maintain an even seam width on the root side of a laser weld by continually controlling the output laser power of a 1500 W CO2 laser....

  16. Predictive control strategy for power management in parallel hybrid-electric vehicle

    DEFF Research Database (Denmark)

    Nodeh, Mohammad Taqi; Gholizade, Hossein; Hajizadeh, Amin

    2016-01-01

    In this paper, a hybrid model-based nonlinear optimal control method is used to compute the optimal power distribution and power management in parallel hybrid electric vehicles. In the power management strategy, for optimal power distribution between the internal combustion engine, electrical...... system and the other subsystems, nonlinear predictive control is applied. In order to achieve this goal, a hierarchical control structure is utilized. This type of control structure consists of three levels of monitoring, coordinating and local controllers. Nonlinear modeling and performance index...... in the proposed method should be formulated at the regulatory level of the controller. Discrete dynamic mode of operation (motor-generator) in hybrid electric vehicle requires to use a dual-mode switch model and to define an alternative expression of performance index for the optimal control problem...

  17. Piezoelectric Power Requirements for Active Vibration Control

    Science.gov (United States)

    Brennan, Matthew C.; McGowan, Anna-Maria Rivas

    1997-01-01

    This paper presents a method for predicting the power consumption of piezoelectric actuators utilized for active vibration control. Analytical developments and experimental tests show that the maximum power required to control a structure using surface-bonded piezoelectric actuators is independent of the dynamics between the piezoelectric actuator and the host structure. The results demonstrate that for a perfectly-controlled system, the power consumption is a function of the quantity and type of piezoelectric actuators and the voltage and frequency of the control law output signal. Furthermore, as control effectiveness decreases, the power consumption of the piezoelectric actuators decreases. In addition, experimental results revealed a non-linear behavior in the material properties of piezoelectric actuators. The material non- linearity displayed a significant increase in capacitance with an increase in excitation voltage. Tests show that if the non-linearity of the capacitance was accounted for, a conservative estimate of the power can easily be determined.

  18. Establishing Causality Using Longitudinal Hierarchical Linear Modeling: An Illustration Predicting Achievement From Self-Control.

    Science.gov (United States)

    Duckworth, Angela Lee; Tsukayama, Eli; May, Henry

    2010-10-01

    The predictive validity of personality for important life outcomes is well established, but conventional longitudinal analyses cannot rule out the possibility that unmeasured third-variable confounds fully account for the observed relationships. Longitudinal hierarchical linear models (HLM) with time-varying covariates allow each subject to serve as his or her own control, thus eliminating between-individual confounds. HLM also allows the directionality of the causal relationship to be tested by reversing time-lagged predictor and outcome variables. We illustrate these techniques through a series of models that demonstrate that within-individual changes in self-control over time predict subsequent changes in GPA but not vice-versa. The evidence supporting a causal role for self-control was not moderated by IQ, gender, ethnicity, or income. Further analyses rule out one time-varying confound: self-esteem. The analytic approach taken in this study provides the strongest evidence to date for the causal role of self-control in determining achievement.

  19. Control Architecture for Future Power Systems

    DEFF Research Database (Denmark)

    Heussen, Kai

    This project looks at control of future electric power grids with a high proportion of wind power and a large number of decentralized power generation, consumption and storage units participating to form a reliable supply of electrical energy. The first objective is developing a method...... for assessment of control architecture of electric power systems with a means-ends perspective. Given this purpose-oriented understanding of a power system, the increasingly stochastic nature of this problem shall be addressed and approaches for robust, distributed control will be proposed and analyzed....... The introduction of close-to-real-time markets is envisioned to enable fast distributed resource allocation while guaranteeing system stability. Electric vehicles will be studied as a means of distributed reversible energy storage and a flexible power electronic interface, with application to the case...

  20. Power Preservation Friendly Congestion Control

    Directory of Open Access Journals (Sweden)

    Ittipong Khemapech

    2014-03-01

    Full Text Available Wireless sensor networks (WSNs are an important area with a major technological impact. Power preservation is one of the important issues in communication protocol development for WSNs. This article presents a review of Event-to-Sink Reliable Transport (ESRT which is specifically developed for an event-based WSNs application. Five characteristic regions and corresponding algorithms have been proposed in ESRT. At the end of each cycle, the reliability is observed and the data reporting rate is adjusted accordingly. Two main contributions of this study include an evaluation of the algorithms proposed by ESRT on their capabilities of power preservation and convergence to the optimal state where a sink receives a desired number of received packets and there is no congestion. According to the results, all of the algorithms demonstrate profound reporting rate adjustments. Moreover, both transmitting and receiving powers can be significantly preserved in the case when the sources generated more packets than required and the network is congested. Therefore, the proposed algorithms unlikely require any enhancements. Moreover, ESRT is analysed how well it can fit in some of the existing WSNs applications. The application category which may deploy ESRT is the event detection and tracking where complete reliability is not required.

  1. Object-based task-level control: A hierarchical control architecture for remote operation of space robots

    Science.gov (United States)

    Stevens, H. D.; Miles, E. S.; Rock, S. J.; Cannon, R. H.

    1994-01-01

    Expanding man's presence in space requires capable, dexterous robots capable of being controlled from the Earth. Traditional 'hand-in-glove' control paradigms require the human operator to directly control virtually every aspect of the robot's operation. While the human provides excellent judgment and perception, human interaction is limited by low bandwidth, delayed communications. These delays make 'hand-in-glove' operation from Earth impractical. In order to alleviate many of the problems inherent to remote operation, Stanford University's Aerospace Robotics Laboratory (ARL) has developed the Object-Based Task-Level Control architecture. Object-Based Task-Level Control (OBTLC) removes the burden of teleoperation from the human operator and enables execution of tasks not possible with current techniques. OBTLC is a hierarchical approach to control where the human operator is able to specify high-level, object-related tasks through an intuitive graphical user interface. Infrequent task-level command replace constant joystick operations, eliminating communications bandwidth and time delay problems. The details of robot control and task execution are handled entirely by the robot and computer control system. The ARL has implemented the OBTLC architecture on a set of Free-Flying Space Robots. The capability of the OBTLC architecture has been demonstrated by controlling the ARL Free-Flying Space Robots from NASA Ames Research Center.

  2. Modeling Control Situations in Power System Operations

    DEFF Research Database (Denmark)

    Saleem, Arshad; Lind, Morten; Singh, Sri Niwas

    2010-01-01

    Increased interconnection and loading of the power system along with deregulation has brought new challenges for electric power system operation, control and automation. Traditional power system models used in intelligent operation and control are highly dependent on the task purpose. Thus, a model...... for intelligent operation and control must represent system features, so that information from measurements can be related to possible system states and to control actions. These general modeling requirements are well understood, but it is, in general, difficult to translate them into a model because of the lack...... of explicit principles for model construction. This paper presents a work on using explicit means-ends model based reasoning about complex control situations which results in maintaining consistent perspectives and selecting appropriate control action for goal driven agents. An example of power system...

  3. Modeling Control Situations in Power System Operations

    DEFF Research Database (Denmark)

    Saleem, Arshad; Lind, Morten; Singh, Sri Niwas

    2010-01-01

    Increased interconnection and loading of the power system along with deregulation has brought new challenges for electric power system operation, control and automation. Traditional power system models used in intelligent operation and control are highly dependent on the task purpose. Thus, a model...... for intelligent operation and control must represent system features, so that information from measurements can be related to possible system states and to control actions. These general modeling requirements are well understood, but it is, in general, difficult to translate them into a model because of the lack...... of explicit principles for model construction. This paper presents a work on using explicit means-ends model based reasoning about complex control situations which results in maintaining consistent perspectives and selecting appropriate control action for goal driven agents. An example of power system...

  4. Autonomous Active Power Control for Islanded AC Microgrids with Photovoltaic Generation and Energy Storage System

    DEFF Research Database (Denmark)

    Wu, Dan; Tang, Fen; Dragicevic, Tomislav;

    2014-01-01

    , an autonomous active power control strategy is proposed for AC islanded microgrids in order to achieve power management in a decentralized manner. The proposed control algorithm is based on frequency bus-signaling of ESS and uses only local measurements for power distribution among microgrid elements. Moreover......, this paper also presents a hierarchical control structure for AC microgrids that is able to integrate the ESS, PV systems and loads. Hereby, basic power management function is realized locally in primary level, while strict frequency regulation can be achieved by using additional secondary controller......In an islanded AC microgrid with distributed energy storage system (ESS), photovoltaic (PV) generation and loads, a coordinated active power regulation is required to ensure efficient utilization of renewable energy, while keeping the ESS from overcharge and over discharge conditions. In this paper...

  5. MODEM: a multi-agent hierarchical structure to model the human motor control system.

    Science.gov (United States)

    Emadi Andani, Mehran; Bahrami, Fariba; Jabehdar Maralani, Parviz; Ijspeert, Auke Jan

    2009-12-01

    In this study, based on behavioral and neurophysiological facts, a new hierarchical multi-agent architecture is proposed to model the human motor control system. Performance of the proposed structure is investigated by simulating the control of sit to stand movement. To develop the model, concepts of mixture of experts, modular structure, and some aspects of equilibrium point hypothesis were brought together. We have called this architecture MODularized Experts Model (MODEM). Human motor system is modeled at the joint torque level and the role of the muscles has been embedded in the function of the joint compliance characteristics. The input to the motor system, i.e., the central command, is the reciprocal command. At the lower level, there are several experts to generate the central command to control the task according to the details of the movement. The number of experts depends on the task to be performed. At the higher level, a "gate selector" block selects the suitable subordinate expert considering the context of the task. Each expert consists of a main controller and a predictor as well as several auxiliary modules. The main controller of an expert learns to control the performance of a given task by generating appropriate central commands under given conditions and/or constraints. The auxiliary modules of this expert learn to scrutinize the generated central command by the main controller. Auxiliary modules increase their intervention to correct the central command if the movement error is increased due to an external disturbance. Each auxiliary module acts autonomously and can be interpreted as an agent. Each agent is responsible for one joint and, therefore, the number of the agents of each expert is equal to the number of joints. Our results indicate that this architecture is robust against external disturbances, signal-dependent noise in sensory information, and changes in the environment. We also discuss the neurophysiological and behavioral basis of

  6. Modular supervisory controller for hybrid power systems

    Energy Technology Data Exchange (ETDEWEB)

    Lemos Pereira, A. de

    2000-06-01

    The power supply of remote places has been commonly provided by thermal power plants, usually diesel generators. Although hybrid power systems may constitute the most economical solution in many applications their widespread application to the electrification schemes of remote areas still depends on improvements in the issues of design and operation control. The main limitations of the present hybrid power systems technology, which are identified in this work, are related to the control and supervision of the power system. Therefore this thesis focuses on the modularity of supervisory controllers in order to design cost-competitive and reliable hybrid power systems. The modular supervisory controller created in this project is considered an important part of a system design approach that aims to overcome the technical difficulties of the current engineering practice and contribute to open the market of hybrid power systems. The term modular refers to a set of design characteristics that allows the use of basically the same supervisory controller in different projects. The modularization and standardisation of the controller include several issues such as interfacing components, communication protocols, modelling, programming and control strategies. The modularity can reduce the highly specialised system engineering related to the integration of components, operation and control. It can also avoid the high costs for installation, service and maintenance. A modular algorithm for supervisory controllers has been developed (a Matlab program called SuperCon) using an object-oriented design and it has been tested through several simulations using different hybrid system configurations and different control strategies. This thesis presents a complete control system design process which can be used as the basis for the development and implementation of intelligent and autonomous supervisory controllers for hybrid power systems with modular characteristics. (au)

  7. Power module control moment gyro

    Science.gov (United States)

    1979-01-01

    The directed design modifications to the Skylab/ATM CMG for application to the Power Module include new rotors of a different material with high resistance to stress corrosion cracking. The spin bearing retainer fix which was determined during the post Skylab mission was incorporated, and the speed pickoff was improved through the use of pickoff thermal cycling screening tests. The unlimited gimbal freedom on box axes was incorporated using slip ring assemblies. The on-orbit replacement capability was also incorporated for the CMG assembly and the inverter assembly.

  8. Output power control for large wind power penetration in small power system

    Energy Technology Data Exchange (ETDEWEB)

    Senjyu, Tomonobu; Kaneko, Toshiaki; Uehara, Akie; Yona, Atsushi; Sekine, Hideomi [University of the Ryukyus, 1 Senbaru, Nishihara-cho, Nakagami, Okinawa 903-0213 (Japan); Kim, Chul-Hwan [Sungkyunkwan University, Suwon 440-746 (Korea)

    2009-11-15

    Nowadays, wind turbine generator (WTG) is increasingly required to provide control capabilities regarding output power. Under this scenario, this paper proposes an output power control of WTG using pitch angle control connected to small power systems. By means of the proposed method, output power control of WTG considering states of power system becomes possible, and in general both conflicting objectives of output power leveling and acquisition power increase are achieved. In this control approach, WTG is given output power command by fuzzy reasoning which has three inputs for average wind speed, variance of wind speed, and absolute average of frequency deviation. Since fuzzy reasoning is used, it is possible to define output power command corresponding to wind speed condition and changing capacity of power system momentarily. Moreover, high performance pitch angle control based on output power command is achieved by generalized predictive control (GPC). The simulation results by using actual detailed model for wind power system show the effectiveness of the proposed method. (author)

  9. Hierarchical path planning and control of a small fixed-wing UAV: Theory and experimental validation

    Science.gov (United States)

    Jung, Dongwon

    2007-12-01

    problem is formulated by setting up geometric linear constraints as well as boundary conditions. Subsequently, we construct B-spline path templates by solving a set of distinct optimization problems. For application in UAV motion planning, the path templates are incorporated to replace parts of the entire path by the smooth B-spline paths. Each path segment is stitched together while preserving continuity to obtain a final smooth reference path to be used for path following control. The path following control for a small fixed-wing UAV to track the prescribed smooth reference path is also addressed. Assuming the UAV is equipped with an autopilot for low level control, we adopt a kinematic error model with respect to the moving Serret-Frenet frame attached to a path for tracking controller design. A kinematic path following control law that commands heading rate is presented. Backstepping is applied to derive the roll angle command by taking into account the approximate closed-loop roll dynamics. A parameter adaptation technique is employed to account for the inaccurate time constant of the closed-loop roll dynamics during actual implementation. Finally, we implement the proposed hierarchical path control of a small UAV on the actual hardware platform, which is based on an 1/5 scale R/C model airframe (Decathlon) and the autopilot hardware and software. Based on the hardware-in-the-loop (HIL) simulation environment, the proposed hierarchical path control algorithm has been validated through on-line, real-time implementation on a small micro-controller. By a seamless integration of the control algorithms for path planning, path smoothing, and path following, it has been demonstrated that the UAV equipped with a small autopilot having limited computational resources manages to accomplish the path control objective to reach the goal while avoiding obstacles with minimal human intervention.

  10. Controllable growth of polyaniline nanowire arrays on hierarchical macro/mesoporous graphene foams for high-performance flexible supercapacitors

    Science.gov (United States)

    Yu, Pingping; Zhao, Xin; Li, Yingzhi; Zhang, Qinghua

    2017-01-01

    Free-standing hierarchical macro/mesoporous flexible graphene foam have been constructed by rational intergration ofwell dispersed graphene oxide sheets and amino-modified polystyrene (PS) spheres through a facile ;templating and embossing; technique. The three dimensional (3D) macro/mesoporous flexible graphene foam not only inherits the uniform porous structures of graphene foam, but also contains hierarchical macro/mesopores on the struts by sacrificing PS spheres and the activation of KOH, which could providing rapid pathways for ionic and electronic transport to high specific capacitance. Vertically polyaniline (PANI) nanowire arrays are then uniformly deposited onto the hierarchical macro/mesoporous graphene foam(fRGO-F/PANI) by a simple in situ polymerization, which show a high specific capacitance of 939 F g-1. Thanks to the synergistic function of 3D bicontinuous hierarchical porous structure of graphene foam and effective immobilization of PANI nanowires on the struts, the assembled symmetric supercapctior with fRGO-F/PANI as electrodes exhibits a maximum energy density and power density of 20.9 Wh kg-1 and 103.2 kW kg-1, respectively. Moreover, it also displays an excellent cyclic stability with a 88.7% retention after 5000 cycles.

  11. Selective harmonic control for power converters

    DEFF Research Database (Denmark)

    Zhou, Keliang; Yang, Yongheng; Blaabjerg, Frede;

    2014-01-01

    This paper proposes an Internal Model Principle (IMP) based Selective Harmonic Controller (SHC) for power converters. The proposed SHC offers an optimal control solution for power converters to mitigate power harmonics. It makes a good trade-off among cost, complexity and performance. It has high...... accuracy and fast transient response, and it is cost-effective, easy for real-time implementation, and compatible for design rules-of-thumb. An application on a three-phase PWM converter has confirmed the effectiveness of the proposed control scheme in terms of harmonic mitigation....

  12. Concept and controllability of virtual power plant

    Energy Technology Data Exchange (ETDEWEB)

    Setiawan, E.A.

    2007-07-01

    In the end of 20th century the conception of electrical power supply is morphing gradually from centralized into decentralized system, indicated by increasing the installation of distributed generation on the main grid. With emerging of advanced communication and information technology, the aggregation control of several DG units can be developed as virtual power plant in order to provide added-value to the electric power system. This thesis presents definitions and types of Virtual Power Plants (VPP), then developing control through numerical simulation. The thesis proposes three DG controls namely Basic Autocontrol System (BAS), Smart Autocontrol System (SAS) and Tracking Efficiency Autocontrol System (TEAS). The BAS controls the DG output power with the objective to cover the local load demand. The drawback of this system is that the coordination among DG units is not established yet. In contrast to the BAS, the SAS has a control coordination centre which is responsible of controlling a certain number of DG units. The SAS controls and coordinates the operation of the dedicated DG units in order to minimize power exchange with the superior grid. However the efficiency issue is not considered at two previous control systems, therefore the TEAS was developed. Principally this system is similar to the SAS in terms of information exchange but additionally optimizes the operation efficiency of DG units. This is accomplished by tracking the systems' most efficient operation point. All control systems have been implemented into a simulation environment. The simulation results show that all developed control systems are capable to minimize the power exchange with the superior grid. The systems are able to follow changing load conditions. Furthermore the simulation results prove the ability of TEAS to optimize the system efficiency. Finally the contribution of VPP to voltage regulation is investigated with several scenarios. The influence of both, active and reactive

  13. Reactive Power Management in Islanded Microgrid – Proportional Power Sharing in Hierarchical Droop Control

    DEFF Research Database (Denmark)

    Milczarek, Adam; Malinowski, Mariusz; Guerrero, Josep M.

    2015-01-01

    A microgrid (MG) is a local energy system consisting a number of energy sources (e.g. wind turbine or solar panels among others), energy storage units and loads that operate connected to the main electrical grid or autonomously. MGs provide flexibility, reduce the main electricity grid dependence...

  14. Optimal control applications in electric power systems

    CERN Document Server

    Christensen, G S; Soliman, S A

    1987-01-01

    Significant advances in the field of optimal control have been made over the past few decades. These advances have been well documented in numerous fine publications, and have motivated a number of innovations in electric power system engineering, but they have not yet been collected in book form. Our purpose in writing this book is to provide a description of some of the applications of optimal control techniques to practical power system problems. The book is designed for advanced undergraduate courses in electric power systems, as well as graduate courses in electrical engineering, applied mathematics, and industrial engineering. It is also intended as a self-study aid for practicing personnel involved in the planning and operation of electric power systems for utilities, manufacturers, and consulting and government regulatory agencies. The book consists of seven chapters. It begins with an introductory chapter that briefly reviews the history of optimal control and its power system applications and also p...

  15. Design of IP Camera Access Control Protocol by Utilizing Hierarchical Group Key

    Directory of Open Access Journals (Sweden)

    Jungho Kang

    2015-08-01

    Full Text Available Unlike CCTV, security video surveillance devices, which we have generally known about, IP cameras which are connected to a network either with or without wire, provide monitoring services through a built-in web-server. Due to the fact that IP cameras can use a network such as the Internet, multiple IP cameras can be installed at a long distance and each IP camera can utilize the function of a web server individually. Even though IP cameras have this kind of advantage, it has difficulties in access control management and weakness in user certification, too. Particularly, because the market of IP cameras did not begin to be realized a long while ago, systems which are systematized from the perspective of security have not been built up yet. Additionally, it contains severe weaknesses in terms of access authority to the IP camera web server, certification of users, and certification of IP cameras which are newly installed within a network, etc. This research grouped IP cameras hierarchically to manage them systematically, and provided access control and data confidentiality between groups by utilizing group keys. In addition, IP cameras and users are certified by using PKI-based certification, and weak points of security such as confidentiality and integrity, etc., are improved by encrypting passwords. Thus, this research presents specific protocols of the entire process and proved through experiments that this method can be actually applied.

  16. An Efficient Admission Control Algorithm for Load Balancing In Hierarchical Mobile IPv6 Networks

    CERN Document Server

    Harini, Prof P

    2009-01-01

    In hierarchical Mobile IPv6 networks, Mobility Anchor Point (MAP) may become a single point of bottleneck as it handles more and more mobile nodes (MNs). A number of schemes have been proposed to achieve load balancing among different MAPs. However, signaling reduction is still imperfect because these schemes also avoid the effect of the number of CNs. Also only the balancing of MN is performed, but not the balancing of the actual traffic load, since CN of each MN may be different. This paper proposes an efficient admission control algorithm along with a replacement mechanism for HMIPv6 networks. The admission control algorithm is based on the number of serving CNs and achieves actual load balancing among MAPs. Moreover, a replacement mechanism is introduced to decrease the new MN blocking probability and the handoff MN dropping probability. By simulation results, we show that, the handoff delay and packet loss are reduced in our scheme, when compared with the standard HMIPv6 based handoff.

  17. Multiagent voltage and reactive power control system

    Directory of Open Access Journals (Sweden)

    I. Arkhipov

    2014-12-01

    Full Text Available This paper is devoted to the research of multiagent voltage and reactive power control system development. The prototype of the system has been developed by R&D Center at FGC UES (Russia. The control system architecture is based on the innovative multiagent system theory application that leads to the achievement of several significant advantages (in comparison to traditional control systems implementation such as control system efficiency enhancement, control system survivability and cyber security.

  18. Voltage Control of Distribution Grids with Multi-Microgrids Using Reactive Power Management

    Directory of Open Access Journals (Sweden)

    WLODARCZYK, P.

    2015-02-01

    Full Text Available Low-voltage Microgrids can be valuable sources of ancillary services for the Distribution System Operators (DSOs. The aim of this paper was to study if and how multi-microgrids can contribute to Voltage Control (VC in medium-voltage distribution grids by means of reactive power generation and/or absorption. The hierarchical control strategy was proposed with the main focus on the tertiary control which was defined as optimal power flow problem. The interior-point algorithm was applied to optimise experimental benchmark grid with the presence of Distributed Energy Resources (DERs. Moreover, two primary objectives were formulated: active power losses and amount of reactive power used to reach the voltage profile. As a result the active power losses were minimised to the high extent achieving the savings around 22% during entire day.

  19. Distributed Power-Flow Controller (DPFC Simulation

    Directory of Open Access Journals (Sweden)

    T Jagan Mohan Rao

    2014-10-01

    Full Text Available This paper describes the steady-state response and control of power in transmission line equipped with FACTS devices. Detailed simulations are carried out on two -machine systems to illustrate the control features of these devices and their influence to increase power transfer capability and improve system reliability. The DPFC is derived from the unified power-flow controller (UPFC and DPFC has the same control capability as the UPFC. The DPFC can be considered as a UPFC with an eliminated common dc link. The active power exchange between the shunt and series converters, which is through the common dc link in the UPFC, is now through the transmission lines at the third -harmonic frequency. The interaction between the DPFC, the network and the machines are analyzed.

  20. Controlled Compact High Voltage Power Lines

    Directory of Open Access Journals (Sweden)

    Postolati V.

    2016-04-01

    Full Text Available Nowadays modern overhead transmission lines (OHL constructions having several significant differences from conventional ones are being used in power grids more and more widely. Implementation of compact overhead lines equipped with FACTS devices, including phase angle regulator settings (compact controlled OHL, appears to be one of the most effective ways of power grid development. Compact controlled AC HV OHL represent a new generation of power transmission lines embodying recent advanced achievements in design solutions, including towers and insulation, together with interconnection schemes and control systems. Results of comprehensive research and development in relation to 110–500kV compact controlled power transmission lines together with theoretical basis, substantiation, and methodological approaches to their practical application are presented in the present paper.

  1. Automated Power Control for Virtualized Infrastructures

    Institute of Scientific and Technical Information of China (English)

    文雨; 王伟平; 郭莉; 孟丹

    2014-01-01

    Power control for virtualized environments has gained much attention recently. One of the ma jor challenges is keeping underlying infrastructure in reasonably low power states and achieving service-level objectives (SLOs) of upper applications as well. Existing solutions, however, cannot effectively tackle this problem for virtualized environments. In this paper, we propose an automated power control solution for such scenarios in hope of making some progress. The major advantage of our solution is being able to precisely control the CPU frequency levels of a physical environment and the CPU power allocations among virtual machines with respect to the SLOs of multiple applications. Based on control theory and online model estimation, our solution can adapt to the variations of application power demands. Additionally, our solution can simultaneously manage the CPU power control for all virtual machines according to their dependencies at either the application-level or the infrastructure-level. The experimental evaluation demonstrates that our solution outperforms three state-of-the-art methods in terms of achieving the application SLOs with low infrastructure power consumption.

  2. Facts controllers in power transmission and distribution

    CERN Document Server

    Padiyar, KR

    2007-01-01

    About the Book: The emerging technology of Flexible AC Transmission System (FACTS) enables planning and operation of power systems at minimum costs, without compromising security. This is based on modern high power electronic systems that provide fast controllability to ensure ''flexible'' operation under changing system conditions. This book presents a comprehensive treatment of the subject by discussing the operating principles, mathematical models, control design and issues that affect the applications. The concepts are explained often with illustrative examples and case studies. In partic

  3. Power system dynamics stability and control

    CERN Document Server

    Padiyar, K R

    2008-01-01

    Modern power systems tend to be very Complex not only due to increasing Demand for quality power, but also on Account of extensive interconnections and increasing dependence on control for optimum utilization for existing resources. A good Knowledge of system dynamics and control is Essential for secure operation of the system. This book is intended to serve the needs of the Student and practicing engineers. A Large number of illustrative examples are included to provide an insight into the application of the theory.

  4. Fractional Power Control for Decentralized Wireless Networks

    CERN Document Server

    Jindal, Nihar; Andrews, Jeffrey G

    2007-01-01

    We propose and analyze a new paradigm for power control in decentralized wireless networks, termed fractional power control. Transmission power is chosen as the current channel quality raised to an exponent -s, where s is a constant between 0 and 1. Choosing s = 1 and s = 0 correspond to the familiar cases of channel inversion and constant power transmission, respectively. Choosing s in (0, 1) allows all intermediate policies between these two extremes to be evaluated, and we see that neither extreme is ideal. We prove that using an exponent of s = 1/2 optimizes the transmission capacity of an ad hoc network, meaning that the inverse square root of the channel strength is the optimal transmit power scaling. Intuitively, this choice achieves the optimal balance between helping disadvantaged users while making sure they do not flood the network with interference.

  5. Progesterone and oestrogen in pregnancy and parturition: comparative aspects and hierarchical control.

    Science.gov (United States)

    Heap, R B; Galil, A K; Harrison, F A; Jenkin, G; Perry, J S

    1977-01-01

    The different ways in which the progesterone requirements of pregnancy are met in various species are reviewed here. Progesterone production expressed in terms of metabolic body weight lies within about one order of magnitude in several species (but not in the rat), whether the hormone is predominantly ovarian or placental in origin. Parturition is usually preceded by a decrease in the plasma concentration of progesterone and the evidence which suggests that a decrease in secretion involves enzyme induction is summarized. In the sheep a sequence of well-marked hormonal changes can be discerned--an increase in fetal cortisol secretion followed by a fall in placental progesterone and a rise in oestrogen and prostaglandin F2alpha secretion. This sequence has been interpreted in terms of hierarchical control theory which envisages a series of levels placed in a descending order of importance and in which there is a downward transmission of a signal from a higher level that modifies activity at a lower level. A dominant level in the hierarchy in the sheep and pig seems to be the fetal hypothalamus and pituitary, but in the rabbit the maternal hypothalamus, pituitary and ovary play a more dominant role.

  6. Preparation of magnetic hierarchically porous microspheres with temperature-controlled wettability for removal of oils.

    Science.gov (United States)

    Tao, Shengyang; Ding, Yunzhe; Jiang, Lei; Li, Guangtao

    2017-04-15

    A series of monodispersed microspheres with hierarchically porous structures were prepared by microfluidic devices. Phase separation of the silica sol in microdroplets was adopted to construct these structures. The effects of velocity ratios (for both the continuous and the dispersed phases), collection solvents and calcination temperatures were investigated. The diameters of the microspheres were tuned from 148μm to 940μm by adjusting the velocity ratio. Tests revealed that the surface areas and pore volumes of the microspheres can reach 495m(2)g(-1) and 0.6068mlg(-1), respectively. The macroporous structure can be controlled by the collection solvents, and the wettability of the microspheres is determined by the calcination temperature. A calcination temperature of 450°C leads to a hydrophilic surface property. Fe3O4 nanoparticles were added to the silica sol to form magnetic microspheres, and the porous structure was not affected. This kind of hybrid microsphere adsorbs 3.29 times its own weight in toluene. These spheres can adsorb oil on water surfaces, and then be removed from the water with an external magnetic field. The microspheres can be recovered and reused more than 10 times. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Formation and shape-control of hierarchical cobalt nanostructures using quaternary ammonium salts in aqueous media

    Science.gov (United States)

    Deshmukh, Ruchi; Mehra, Anurag

    2017-01-01

    Aggregation and self-assembly are influenced by molecular interactions. With precise control of molecular interactions, in this study, a wide range of nanostructures ranging from zero-dimensional nanospheres to hierarchical nanoplates and spindles have been successfully synthesized at ambient temperature in aqueous solution. The nanostructures reported here are formed by aggregation of spherical seed particles (monomers) in presence of quaternary ammonium salts. Hydroxide ions and a magnetic moment of the monomers are essential to induce shape anisotropy in the nanostructures. The cobalt nanoplates are studied in detail, and a growth mechanism based on collision, aggregation, and crystal consolidation is proposed based on a electron microscopy studies. The growth mechanism is generalized for rods, spindles, and nearly spherical nanostructures, obtained by varying the cation group in the quaternary ammonium hydroxides. Electron diffraction shows different predominant lattice planes on the edge and on the surface of a nanoplate. The study explains, hereto unaddressed, the temporal evolution of complex magnetic nanostructures. These ferromagnetic nanostructures represent an interesting combination of shape anisotropy and magnetic characteristics.

  8. Coordinated Control Strategies of VSC-HVDC-Based Wind Power Systems for Low Voltage Ride Through

    Directory of Open Access Journals (Sweden)

    Xinyin Zhang

    2015-07-01

    Full Text Available The Voltage Source Converter-HVDC (VSC-HVDC system applied to wind power generation can solve large scale wind farm grid-connection and long distance transmission problems. However, the low voltage ride through (LVRT of the VSC-HVDC connected wind farm is a key technology issue that must be solved, and it is currently lacking an economic and effective solution. In this paper, a LVRT coordinated control strategy is proposed for the VSC-HVDC-based wind power system. In this strategy, the operation and control of VSC-HVDC and wind farm during the grid fault period is improved. The VSC-HVDC system not only provides reactive power support to the grid, but also effectively maintains the power balance and DC voltage stability by reducing wind-farm power output, without increasing the equipment investment. Correspondingly, to eliminate the influence on permanent magnet synchronous generator (PMSG-based wind turbine (WT systems, a hierarchical control strategy is designed. The speed and validity of the proposed LVRT coordinated control strategy and hierarchical control strategy were verified by MATLAB/Simulink simulations.

  9. A GPS-Based Control Framework for Accurate Current Sharing and Power Quality Improvement in Microgrids

    DEFF Research Database (Denmark)

    Golsorkhi, Mohammad; Savaghebi, Mehdi; Lu, Dylan;

    2016-01-01

    consensus protocol to ensure proportional sharing of average power. The voltage conditioning scheme produces compensation signals at fundamental and dominant harmonics to improve the voltage quality at a sensitive load bus. Experimental results are presented to validate the efficacy of the proposed method.......This paper proposes a novel hierarchical control strategy for improvement of load sharing and power quality in ac microgrids. This control framework is composed of a droop based controller at the primary level, and a combination of distributed power sharing and voltage conditioning schemes...... dynamic response. The droop coefficient, which acts as a virtual resistance is adaptively changed as a function of the peak current. This strategy not only simplifies the control design but also improves the current sharing accuracy at high loading conditions. The distributed power sharing scheme uses...

  10. Femtosecond double-pulse fabrication of hierarchical nanostructures based on electron dynamics control for high surface-enhanced Raman scattering.

    Science.gov (United States)

    Zhang, Ning; Li, Xin; Jiang, Lan; Shi, Xuesong; Li, Cong; Lu, Yongfeng

    2013-09-15

    This Letter presents a simple, efficient approach for high surface-enhanced Raman scattering by one-step controllable fabrication of hierarchical structures (nanoparticles+subwavelength ripples) on silicon substrates in silver nitrate solutions using femtosecond double pulses based on nanoscale electron dynamics control. As the delays of the double pulses increase from 0 fs to 1 ps, the hierarchical structures can be controlled with (1) nanoparticles--the number of nanoparticles in the range of 40-100 nm reaches the maximum at 800 fs and (2) ripples--the subwavelength ripples become intermittent with decreased ablation depths. The redistributed nanoparticles and the modified ripple structures contribute to the maximum enhancement factor of 2.2×10(8) (measured by 10(-6)  M rhodamine 6G solution) at the pulse delay of 800 fs.

  11. Controllable fabrication of large-scale hierarchical silver nanostructures for long-term stable and ultrasensitive SERS substrates

    Science.gov (United States)

    Wu, Jing; Fang, Jinghuai; Cheng, Mingfei; Gong, Xiao

    2016-09-01

    In this work, we aim to prepare effective and long-term stable hierarchical silver nanostructures serving as surface-enhanced Raman scattering (SERS) substrates simply via displacement reaction on Aluminum foils. In our experiments, Hexadecyltrimethylammonium bromide (CTAB) is used as cationic surfactant to control the velocity of displacement reaction as well as the hierarchical morphology of the resultant. We find that the volume ratio of CTAB to AgNO3 plays a dominant role in regulating the hierarchical structures besides the influence of displacement reaction time. These as-prepared hierarchical morphologies demonstrate excellent SERS sensitivity, structural stability and reproducibility with low values of relative standard deviation less than 20 %. The high SERS analytical enhancement factor of ~6.7 × 108 is achieved even at the concentration of Crystal Violet (CV) as low as 10-7 M, which is sufficient for single-molecule detection. The detection limit of CV is 10-9 M in this study. We believe that this simple and rapid approach integrating advantages of low-cost production and high reproducibility would be a promising way to facilitate routine SERS detection and will get wide applications in chemical synthesis.

  12. Modelling supervisory controller for hybrid power systems

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, A.; Bindner, H.; Lundsager, P. [Risoe National Lab., Roskilde (Denmark); Jannerup, O. [Technical Univ. of Denmark, Dept. of Automation, Lyngby (Denmark)

    1999-03-01

    Supervisory controllers are important to achieve optimal operation of hybrid power systems. The performance and economics of such systems depend mainly on the control strategy for switching on/off components. The modular concept described in this paper is an attempt to design standard supervisory controllers that could be used in different applications, such as village power and telecommunication applications. This paper presents some basic aspects of modelling and design of modular supervisory controllers using the object-oriented modelling technique. The functional abstraction hierarchy technique is used to formulate the control requirements and identify the functions of the control system. The modular algorithm is generic and flexible enough to be used with any system configuration and several goals (different applications). The modularity includes accepting modification of system configuration and goals during operation with minor or no changes in the supervisory controller. (au)

  13. Power System Security and Stability Control Company

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Branch Company Profile Power System Security and Stability Control Company is called "NARI Stability" to externals. It has a scientific research team, led by Prof. Yusheng Xue, who is an international renowned expert on stability technology, and an academician of the Chinese Academy of Engineering. Based on support and service of security and stability control technology and equipment,

  14. Are watershed and lacustrine controls on planktonic N2 fixation hierarchically structured?

    Science.gov (United States)

    Scott, J Thad; Doyle, Robert D; Prochnow, Shane J; White, Joseph D

    2008-04-01

    N2 fixation can be an important source of N to limnetic ecosystems and can influence the structure of phytoplankton communities. However, watershed-scale conditions that favor N2 fixation in lakes and reservoirs have not been well studied. We measured N2 fixation and lacustrine variables monthly over a 19-month period in Waco Reservoir, Texas, USA, and linked these data with nutrient-loading estimates from a physically based watershed model. Readily available topographic, soil, land cover, effluent discharge, and climate data were used in the Soil and Water Assessment Tool (SWAT) to derive watershed nutrient-loading estimates. Categorical and regression tree (CART) analysis revealed that lacustrine and watershed correlates of N2 fixation were hierarchically structured. Lacustrine conditions showed greater predictive capability temporally. For instance, low NO3(-) concentration (27 degrees C) in the reservoir were correlated with the initiation of N2 fixation seasonally. When lacustrine conditions were favorable for N2 fixation, watershed conditions appeared to influence spatial patterns of N2 fixation within the reservoir. For example, spatially explicit patterns of N2 fixation were correlated with the ratio of N:P in nutrient loadings and the N loading rate, which were driven by anthropogenic activity in the watershed and periods of low stream flow, respectively. Although N2 fixation contributed <5% of the annual N load to the reservoir, 37% of the N load was derived from atmospheric N2 fixation during summertime when stream flow in the watershed was low. This study provides evidence that watershed anthropogenic activity can exert control on planktonic N2 fixation, but that temporality is controlled by lacustrine conditions. Furthermore, this study also supports suggestions that reduced inflows may increase the propensity of N2-fixing cyanobacterial blooms in receiving waters of anthropogenically modified landscapes.

  15. Chaotic dynamics of controlled electric power systems

    Science.gov (United States)

    Kozlov, V. N.; Trosko, I. U.

    2016-12-01

    The conditions for appearance of chaotic dynamics of electromagnetic and electromechanical processes in energy systems described by the Park-Gorev bilinear differential equations with account for lags of coordinates and restrictions on control have been formulated. On the basis of classical equations, the parameters of synchronous generators and power lines, at which the chaotic dynamics of energy systems appears, have been found. The qualitative and quantitative characteristics of chaotic processes in energy associations of two types, based on the Hopf theorem, and methods of nonstationary linearization and decompositions are given. The properties of spectral characteristics of chaotic processes have been investigated, and the qualitative similarity of bilinear equations of power systems and Lorentz equations have been found. These results can be used for modernization of the systems of control of energy objects. The qualitative and quantitative characteristics for power energy systems as objects of control and for some laws of control with the feedback have been established.

  16. Wireless Power Control for Tactical MANET: Power Rate Bounds

    Science.gov (United States)

    2016-09-01

    Allen David F. Schwartz Approved for public release. . SSC Pacific San Diego , CA 92152-5001 SB SSC Pacific San Diego ...and Naval Warfare Systems Center Pacific (SSC Pacific), San Diego , CA. Funding for this effort was provided by the SSC Pacific Naval Innovative...Delgado & Luna- Rivera ob- serve [7]: 5 “Therefore, the main challenge in distributed power control is to compensate the time-varying profiles of the

  17. Optimal coordinated voltage control of power systems

    Institute of Scientific and Technical Information of China (English)

    LI Yan-jun; HILL David J.; WU Tie-jun

    2006-01-01

    An immune algorithm solution is proposed in this paper to deal with the problem of optimal coordination of local physically based controllers in order to preserve or retain mid and long term voltage stability. This problem is in fact a global coordination control problem which involves not only sequencing and timing different control devices but also tuning the parameters of controllers. A multi-stage coordinated control scheme is presented, aiming at retaining good voltage levels with minimal control efforts and costs after severe disturbances in power systems. A self-pattern-recognized vaccination procedure is developed to transfer effective heuristic information into the new generation of solution candidates to speed up the convergence of the search procedure to global optima. An example of four bus power system case study is investigated to show the effectiveness and efficiency of the proposed algorithm, compared with several existing approaches such as differential dynamic programming and tree-search.

  18. Reasoning about Control Situations in Power Systems

    DEFF Research Database (Denmark)

    Saleem, Arshad; Lind, Morten

    2009-01-01

    Introduction of distributed generation, deregulation and distribution of control has brought new challenges for electric power system operation, control and automation. Traditional power system models used in reasoning tasks such as intelligent control are highly dependent on the task purpose. Thus......, a model for intelligent control must represent system features, so that information from measurements can be related to possible system states and to control actions. These general modeling requirements are well understood, but it is, in general, difficult to translate them into a model because...... of the lack of explicit principles for model construction. Available modeling concepts for intelligent control do not assist the model builder in the selection of model content i.e. in deciding what is relevant to represent for a particular reasoning task and thereby faced with a difficult interpretation...

  19. Adaptive Power Control for Space Communications

    Science.gov (United States)

    Thompson, Willie L., II; Israel, David J.

    2008-01-01

    This paper investigates the implementation of power control techniques for crosslinks communications during a rendezvous scenario of the Crew Exploration Vehicle (CEV) and the Lunar Surface Access Module (LSAM). During the rendezvous, NASA requires that the CEV supports two communication links: space-to-ground and crosslink simultaneously. The crosslink will generate excess interference to the space-to-ground link as the distances between the two vehicles decreases, if the output power is fixed and optimized for the worst-case link analysis at the maximum distance range. As a result, power control is required to maintain the optimal power level for the crosslink without interfering with the space-to-ground link. A proof-of-concept will be described and implemented with Goddard Space Flight Center (GSFC) Communications, Standard, and Technology Lab (CSTL).

  20. The CERN Control Protocol for power converters

    Energy Technology Data Exchange (ETDEWEB)

    Barnett, I.; Benincasa, G.; Berrig, O.; Brun, R.; Burla, P.; Coudert, G.; Pett, J.G.; Pittin, R.; Royer, J.P.; Trofimov, N. (CERN, Geneva (Switzerland))

    1993-08-01

    The Control Protocols provide, for a class of similar devices, a unique and standard access procedure from the control system. Behavioral models have been proposed for the different kinds of Power Converters and the corresponding functionalities, with their parameters, variables and attributes have been identified. The resulting data structures have been presented using the ISO ASN.1 metalanguage, that permits universal representation independent of any computer environment. Implementations in the UNIX-based CERN accelerator control systems are under development.

  1. Analysis of Control Power in Controlled Remote State Preparation Schemes

    Science.gov (United States)

    Li, Xihan; Ghose, Shohini

    2017-03-01

    We quantify and analyze the controller's power in controlled remote state preparation schemes. Our analysis provides a lower bound on the control power required for controlled remote preparation of arbitrary D-dimensional states. We evaluate several existing controlled remote state preparation protocols and show that some proposed non-maximally entangled channels are not suitable for perfect controlled remote preparation of arbitrary quantum states from the controller's point of view. We find that for remotely preparing D-dimensional states, the entropy of each controller should be no less than log2 D bits. Our new criteria are not only useful for evaluating controlled remote state preparation schemes but can also be used for other controlled quantum communication schemes.

  2. Power and Control in Kathmandu: A Comparison of Attempted Power, Actual Power, and Achieved Power.

    Science.gov (United States)

    Emery, Clifton R; Thapa, Sirjana; Wu, Shali

    2016-05-05

    We argue that the concept of power has been inadvertently sidelined in recent theory and research on husband violence. Three types of relationship power may matter with respect to husband violence: attempted power, actual power, and achieved power. Analyses of a randomly selected representative sample of 270 married or partnered women in Kathmandu showed that actual power was related to husband violence prevalence, severity, and injury. Achieved power was related to husband violence prevalence and severity, and attempted power was related to husband violence injury. Implications are discussed.

  3. Power control electronics for cryogenic instrumentation

    Science.gov (United States)

    Ray, Biswajit; Gerber, Scott S.; Patterson, Richard L.; Myers, Ira T.

    1995-01-01

    In order to achieve a high-efficiency high-density cryogenic instrumentation system, the power processing electronics should be placed in the cold environment along with the sensors and signal-processing electronics. The typical instrumentation system requires low voltage dc usually obtained from processing line frequency ac power. Switch-mode power conversion topologies such as forward, flyback, push-pull, and half-bridge are used for high-efficiency power processing using pulse-width modulation (PWM) or resonant control. This paper presents several PWM and multiresonant power control circuits, implemented using commercially available CMOS and BiCMOS integrated circuits, and their performance at liquid-nitrogen temperature (77 K) as compared to their room temperature (300 K) performance. The operation of integrated circuits at cryogenic temperatures results in an improved performance in terms of increased speed, reduced latch-up susceptibility, reduced leakage current, and reduced thermal noise. However, the switching noise increased at 77 K compared to 300 K. The power control circuits tested in the laboratory did successfully restart at 77 K.

  4. Correlation between Hierarchical Structure and Processing Control of Large-area Spray-coated Polymer Solar Cells toward High Performance.

    Science.gov (United States)

    Huang, Yu-Ching; Tsao, Cheng-Si; Cha, Hou-Chin; Chuang, Chih-Min; Su, Chun-Jen; Jeng, U-Ser; Chen, Charn-Ying

    2016-01-28

    The formation mechanism of a spray-coated film is different from that of a spin-coated film. This study employs grazing incidence small- and wide-angle X-ray Scattering (GISAXS and GIWAXS, respectively) quantitatively and systematically to investigate the hierarchical structure and phase-separated behavior of a spray-deposited blend film. The formation of PCBM clusters involves mutual interactions with both the P3HT crystal domains and droplet boundary. The processing control and the formed hierarchical structure of the active layer in the spray-coated polymer/fullerene blend film are compared to those in the spin-coated film. How the different post-treatments, such as thermal and solvent vapor annealing, tailor the hierarchical structure of the spray-coated films is quantitatively studied. Finally, the relationship between the processing control and tailored BHJ structures and the performance of polymer solar cell devices is established here, taking into account the evolution of the device area from 1 × 0.3 and 1 × 1 cm(2). The formation and control of the special networks formed by the PCBM cluster and P3HT crystallites, respectively, are related to the droplet boundary. These structures are favorable for the transverse transport of electrons and holes.

  5. Correlation between Hierarchical Structure and Processing Control of Large-area Spray-coated Polymer Solar Cells toward High Performance

    Science.gov (United States)

    Huang, Yu-Ching; Tsao, Cheng-Si; Cha, Hou-Chin; Chuang, Chih-Min; Su, Chun-Jen; Jeng, U-Ser; Chen, Charn-Ying

    2016-01-01

    The formation mechanism of a spray-coated film is different from that of a spin-coated film. This study employs grazing incidence small- and wide-angle X-ray Scattering (GISAXS and GIWAXS, respectively) quantitatively and systematically to investigate the hierarchical structure and phase-separated behavior of a spray-deposited blend film. The formation of PCBM clusters involves mutual interactions with both the P3HT crystal domains and droplet boundary. The processing control and the formed hierarchical structure of the active layer in the spray-coated polymer/fullerene blend film are compared to those in the spin-coated film. How the different post-treatments, such as thermal and solvent vapor annealing, tailor the hierarchical structure of the spray-coated films is quantitatively studied. Finally, the relationship between the processing control and tailored BHJ structures and the performance of polymer solar cell devices is established here, taking into account the evolution of the device area from 1 × 0.3 and 1 × 1 cm2. The formation and control of the special networks formed by the PCBM cluster and P3HT crystallites, respectively, are related to the droplet boundary. These structures are favorable for the transverse transport of electrons and holes. PMID:26817585

  6. APPLICATION OF HIERARCHICAL REINFORCEMENT LEARNING IN ENGINEERING DOMAIN

    Institute of Scientific and Technical Information of China (English)

    WEI LI; Qingtai YE; Changming ZHU

    2005-01-01

    The slow convergence rate of reinforcement learning algorithms limits their wider application.In engineering domains, hierarchical reinforcement learning is developed to perform actions temporally according to prior knowledge. This system can converge fast due to reduced state space.There is a test of elevator group control to show the power of the new system. Two conventional group control algorithms are adopted as prior knowledge. Performance indicates that hierarchical reinforcement learning can reduce the learning time dramatically.

  7. Control algorithms for control of real and reactive power flows and power oscillation damping using UPFC

    Energy Technology Data Exchange (ETDEWEB)

    Ilango, G. Saravana; Nagamani, C.; Sai, A.V.S.S.R.; Aravindan, D. [Department of Electrical and Electronics Engineering, National Institute of Technology, Tiruchirappalli 620015, Tamil Nadu (India)

    2009-04-15

    This paper investigates the application of multivariable control technique to multi-input multi-output (MIMO) non-linear problem of a power transmission system with UPFC. The main objective is to achieve effective independent control of real and reactive power flows with zero dynamic interactions. Towards achieving the objective, feed-back linearization control (FBLC) scheme is implemented in the laboratory for the control of UPFC. A two-bus power system with UPFC has been built in laboratory and the control implementation has been carried out using DSP TMS320LF2407A. Both power flow control and power oscillation damping issues are addressed. The excellent correlation between simulation and experimental results using a laboratory test system establish the validity of the proposed scheme. Although the power stage of the developed laboratory system is a scaled down model and has limited ratings, the FBLC controller can be used equally effectively in a more realistic system set up by appropriate scaling factors for the fed-back signals of currents and voltages and for initiating the inverter voltages. The proposed controller enables UPFC to independently control the real and reactive power with absolute decoupling. Also it is found that the overall performance of the system with the proposed controller is far superior to that using conventional cascade PI control structure. (author)

  8. Evaluation of the hierarchical control of distributed Energy Storage Systems in islanded Microgrids based on Std IEC/ISO 62264

    DEFF Research Database (Denmark)

    Palizban, Omid; Kauhaniemi, Kimmo; Guerrero, Josep M.

    2016-01-01

    In this paper, a decentralized control methodology based on hierarchical control levels is investigated. In recent years, efforts have been made to standardize microgrids (MGs), and the decentralized control method evaluated here is based on the IEC/ISO 62264 standard. Since the main challenge...... proportionally and directly proportionally, respectively, to the state of charge (SoC) of each battery unit during discharging and charging mode. To evaluate this decentralized method based on the IEC/ISO 62264 standard, PSCAD/EMTDC software is used....

  9. Current limiting remote power control module

    Science.gov (United States)

    Hopkins, Douglas C.

    1990-01-01

    The power source for the Space Station Freedom will be fully utilized nearly all of the time. As such, any loads on the system will need to operate within expected limits. Should any load draw an inordinate amount of power, the bus voltage for the system may sag and disrupt the operation of other loads. To protect the bus and loads some type of power interface between the bus and each load must be provided. This interface is most crucial when load faults occur. A possible system configuration is presented. The proposed interface is the Current Limiting Remote Power Controller (CL-RPC). Such an interface should provide the following power functions: limit overloading and resulting undervoltage; prevent catastrophic failure and still provide for redundancy management within the load; minimize cable heating; and provide accurate current measurement. A functional block diagram of the power processing stage of a CL-RPC is included. There are four functions that drive the circuit design: rate control of current; current sensing; the variable conductance switch (VCS) technology; and the algorithm used for current limiting. Each function is discussed separately.

  10. Power Quality Improvement Using Hybrid Power Flow Controller in Power System

    Directory of Open Access Journals (Sweden)

    Manidhar Thula ,

    2014-01-01

    Full Text Available This paper discusses the applicability of Hybrid Power Flow Controller (HPFC as an alternative to Unified Power Flow Controller (UPFC for improvement of power system performance. UPFC is a flexible AC transmission system (FACTS device containing two switching converters, one in series and one in shunt. To configure the HPFC, one of the switching converters of the UPFC is replaced by thyristor controlled variable impedances, thus reducing the cost. In this paper, the HPFC has been configured by multilevel Voltage Source Converter (VSC used for the shunt compensation branches and a thyristor controlled variable impedance used for series compensation. It is shown that with suitable control the HPFC can inject a voltage of required magnitude in series with the line at any desired angle, just like UPFC. This helps in providing compensation equivalent to UPFC and improving the steady state stability limits of the power system.

  11. Shape Controlled Hierarchical Porous Hydrophobic/Oleophilic Metal-Organic Nanofibrous Gel Composites for Oil Adsorption.

    Science.gov (United States)

    Jayaramulu, Kolleboyina; Geyer, Florian; Petr, Martin; Zboril, Radek; Vollmer, Doris; Fischer, Roland A

    2017-03-01

    A versatile and facile synthetic route toward a ultralight hierarchical poroushybrid composed of metal-organic gels and fluorinated graphene oxide is reported. The composite gels show excellent absorbency of oil and various organic solvents due to their prominent meso/macropores, notable hydrophobicity, and superoleophilicity. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Controlled Fabrication of Flower-like Nickel Oxide Hierarchical Structures and Their Application in Water Treatment

    Directory of Open Access Journals (Sweden)

    Linxia Wang

    2012-01-01

    Full Text Available Flower-like NiO hierarchical structures with 2–5 μm diameter assembled from nanosheet building blocks have been successfully fabricated via a wet-chemical method combined with thermodecomposition technology. The template-free method is facile and effective in preparing flower-like NiO superstructures in high yield. The intermediate product and final hierarchical structures are characterized by transmission electron microscopy (TEM, scanning electron microscopy (SEM, X-ray diffraction (XRD, Fourier transform IR (FTIR, and thermogravimetric analysis (TGA. The effects of growth temperature and reaction time on the morphologies of the as-prepared structures were investigated by SEM characterization and a possible mechanism for the formation of flower-like NiO is proposed. Based on the nitrogen adsorption and desorption measurements, the BET surface area of the as-obtained sample is 55.7 m2/g and the pore-size distribution plot indicates a bimodal mesopore distribution, with pore sizes of ca. 2.6 nm and 7.4 nm, respectively. In comparison with sphere-like and rod-like structures, the flower-like NiO hierarchical structures show an excellent ability to rapidly remove various pollutants when used as adsorbent and photocatalyst in waste-water treatment, which may be attributed to its unique hierarchical and porous surface structures.

  13. Research on Power Control of Wind Power Generation Based on Neural Network Adaptive Control

    Institute of Scientific and Technical Information of China (English)

    Hai-ying DONG; Chuan-hua SUN

    2010-01-01

    -For the characteristics of wind power generation system is multivariable,nonlinear and random,in this paper the neural network PID adaptive control is adopted.The size of pitch angle is adjusted in time to improve the performance of power control.The PID parameters are corrected by the gradient descent method,and Radial Basis Functinn(RBF)neural network is used as the system identifier in this method.Simulation results shaw that by using neural adaptive PID controller the generator power control can inhibit effectively the speed and affect the output power of generator.The dynamic performance and robustness of the controlled system is good,and the performance of wind power system is improved.

  14. Model-Based Power Plant Master Control

    Energy Technology Data Exchange (ETDEWEB)

    Boman, Katarina; Thomas, Jean; Funkquist, Jonas

    2010-08-15

    The main goal of the project has been to evaluate the potential of a coordinated master control for a solid fuel power plant in terms of tracking capability, stability and robustness. The control strategy has been model-based predictive control (MPC) and the plant used in the case study has been the Vattenfall power plant Idbaecken in Nykoeping. A dynamic plant model based on nonlinear physical models was used to imitate the true plant in MATLAB/SIMULINK simulations. The basis for this model was already developed in previous Vattenfall internal projects, along with a simulation model of the existing control implementation with traditional PID controllers. The existing PID control is used as a reference performance, and it has been thoroughly studied and tuned in these previous Vattenfall internal projects. A turbine model was developed with characteristics based on the results of steady-state simulations of the plant using the software EBSILON. Using the derived model as a representative for the actual process, an MPC control strategy was developed using linearization and gain-scheduling. The control signal constraints (rate of change) and constraints on outputs were implemented to comply with plant constraints. After tuning the MPC control parameters, a number of simulation scenarios were performed to compare the MPC strategy with the existing PID control structure. The simulation scenarios also included cases highlighting the robustness properties of the MPC strategy. From the study, the main conclusions are: - The proposed Master MPC controller shows excellent set-point tracking performance even though the plant has strong interactions and non-linearity, and the controls and their rate of change are bounded. - The proposed Master MPC controller is robust, stable in the presence of disturbances and parameter variations. Even though the current study only considered a very small number of the possible disturbances and modelling errors, the considered cases are

  15. Model predictive control for wind power gradients

    DEFF Research Database (Denmark)

    Hovgaard, Tobias Gybel; Boyd, Stephen; Jørgensen, John Bagterp

    2015-01-01

    ranges. The system dynamics are quite non-linear, and the constraints and objectives are not convex functions of the control inputs, so the resulting optimal control problem is difficult to solve globally. In this paper, we show that by a novel change of variables, which focuses on power flows, we can......We consider the operation of a wind turbine and a connected local battery or other electrical storage device, taking into account varying wind speed, with the goal of maximizing the total energy generated while respecting limits on the time derivative (gradient) of power delivered to the grid. We...... transform the problem to one with linear dynamics and convex constraints. Thus, the problem can be globally solved, using robust, fast solvers tailored for embedded control applications. We implement the optimal control problem in a receding horizon manner and provide extensive closed-loop tests with real...

  16. Phase-Controlled Iron Oxide Nanobox Deposited on Hierarchically Structured Graphene Networks for Lithium Ion Storage and Photocatalysis

    Science.gov (United States)

    Yun, Sol; Lee, Young-Chul; Park, Ho Seok

    2016-01-01

    The phase control, hierarchical architecturing and hybridization of iron oxide is important for achieving multifunctional capability for many practical applications. Herein, hierarchically structured reduced graphene oxide (hrGO)/α-Fe2O3 and γ-Fe3O4 nanobox hybrids (hrGO/α-Fe and hrGO/γ-Fe NBhs) are synthesized via a one-pot, hydrothermal process and their functionality controlled by the crystalline phases is adapted for energy storage and photocatalysis. The three-dimensionally (3D) macroporous structure of hrGO/α-Fe NBhs is constructed, while α-Fe2O3 nanoboxes (NBs) in a proximate contact with the hrGO surface are simultaneously grown during a hydrothermal treatment. The discrete α-Fe2O3 NBs are uniformly distributed on the surface of the hrGO/α-Fe and confined in the 3D architecture, thereby inhibiting the restacking of rGO. After the subsequent phase transition into γ-Fe3O4, the hierarchical structure and the uniform distribution of NBs are preserved. Despite lower initial capacity, the hrGO/α-Fe NBhs show better rate and cyclic performances than those of commercial rGO/α-Fe due to the uniform distribution of discrete α-Fe2O3 NBs and electronic conductivity, macroporosity, and buffering effect of the hrGO for lithium ion battery anodes. Moreover, the catalytic activity and kinetics of hrGO/γ-Fe NBhs are enhanced for photo-Fenton reaction because of the uniform distribution of discrete γ-Fe3O4 NBs on the 3D hierarchical architecture.

  17. Power Trading and Congestion Management Through Real Power Rescheduling Using Unified Power Flow Controller

    Directory of Open Access Journals (Sweden)

    S.K. Gupta

    2014-09-01

    Full Text Available Congestion is termed as the operating condition in which there is not enough transmission capacity to implement all the desired transactions. This paper deals with the power trading in electricity market to ensure regular supply at competitive rates. Bidding process of 75 Indian bus systems is analyzed. It is shown that how can congestion cost can be addressed through active power rescheduling with transmission line constraints using Unified power flow controller.

  18. A Survey on Control of Electric Power Distributed Generation Systems for Microgrid Applications

    DEFF Research Database (Denmark)

    Bouzid, Allal; Guerrero, Josep M.; Cheriti, Ahmed

    2015-01-01

    The introduction of microgrids in distribution networks based on power electronics facilitates the use of renewable energy resources, distributed generation (DG) and storage systems while improving the quality of electric power and reducing losses thus increasing the performance and reliability...... of the electrical system, opens new horizons for microgrid applications integrated into electrical power systems. The hierarchical control structure consists of primary, secondary, and tertiary levels for microgrids that mimic the behavior of the mains grid is reviewed. The main objective of this paper is to give...... a description of state of the art for the distributed power generation systems (DPGS) based on renewable energy and explores the power converter connected in parallel to the grid which are distinguished by their contribution to the formation of the grid voltage and frequency and are accordingly classified...

  19. Power-based control of physical systems

    NARCIS (Netherlands)

    Garcia-Canseco, Eloisa; Jeltsema, Dimitri; Ortega, Romeo; Scherpen, Jacquelien M. A.

    2010-01-01

    It is well known that energy-balancing control is stymied by the presence of pervasive dissipation. To overcome this problem in electrical circuits, the alternative paradigm of power shaping was introduced in Ortega, Jeltsema, and Scherpen (2003)-where, as suggested by its name, stabilization is ach

  20. Power, Control and Status in Physical Education.

    Science.gov (United States)

    Thomson, Ian

    2003-01-01

    For most of the 20th century, Scottish teacher education in physical education, sport, and recreation were divided by gender and philosophy and provided by two specialist colleges. Analysis of the government's 1986 decision to merge the colleges focuses on the shift in power and control from the self-contained world of physical education to…

  1. A GPS-Based Control Method for Load Sharing and Power Quality Improvement in Microgrids

    DEFF Research Database (Denmark)

    Golsorkhi, Mohammad; Lu, Dylan; Savaghebi, Mehdi;

    2016-01-01

    This paper proposes a novel control method for accurate sharing of load current among the Distributed Energy Resources (DER) and high power quality operating in islanded ac microgrids. This control scheme is based on hierarchical structure comprising of decentralized primary controllers and a cen....... The secondary controller produces compensation signals at fundamental and dominant harmonics to improve the voltage quality at a sensitive load bus. Experimental results are presented to validate the efficacy of the proposed method.......This paper proposes a novel control method for accurate sharing of load current among the Distributed Energy Resources (DER) and high power quality operating in islanded ac microgrids. This control scheme is based on hierarchical structure comprising of decentralized primary controllers......-I) droop characteristic. The droop coefficient, which acts as a virtual resistance, is adaptively changed as a function of peak current. This strategy not only simplifies the control design but also enables faster dynamics and higher accuracy of current sharing especially at high loading conditions...

  2. Rapid phase-controlled microwave synthesis of nanostructured hierarchical tetragonal and cubic β-In 2S 3 dandelion flowers

    Science.gov (United States)

    Naik, S. D.; Jagadale, T. C.; Apte, S. K.; Sonawane, R. S.; Kulkarni, M. V.; Patil, S. I.; Ogale, S. B.; Kale, B. B.

    2008-02-01

    Phase controlled synthesis of hierarchical nanostructured β-In 2S 3 dandelion flowers is realized by a rapid microwave solvothermal process using indium metal, nitric acid and thiourea as precursors. The tetragonal and cubic phases of the compound have been successfully and separately stabilized in the same type of dandelion morphology by using aqueous-mediated and methanol-mediated synthesis, respectively. The possible mechanism responsible for phase control is discussed. Optical properties of the flowers as well as their hydrogen generation capability by photodecomposition of H 2S under visible light are also reported.

  3. CCLIBS: The CERN Power Converter Control Libraries

    CERN Document Server

    AUTHOR|(SzGeCERN)404953; Lebioda, Krzysztof Tomasz; Magrans De Abril, Marc; Martino, Michele; Murillo Garcia, Raul; Nicoletti, Achille

    2015-01-01

    Accurate control of power converters is a vital activity in large physics projects. Several different control scenarios may coexist, including regulation of a circuit’s voltage, current, or field strength within a magnet. Depending on the type of facility, a circuit’s reference value may be changed asynchronously or synchronously with other circuits. Synchronous changes may be on demand or under the control of a cyclic timing system. In other cases, the reference may be calculated in real-time by an outer regulation loop of some other quantity, such as the tune of the beam in a synchrotron. The power stage may be unipolar or bipolar in voltage and current. If it is unipolar in current, it may be used with a polarity switch. Depending on the design, the power stage may be controlled by a firing angle or PWM duty-cycle reference, or a voltage or current reference. All these cases are supported by the CERN Converter Control Libraries (CCLIBS). These open-source C libraries include advanced reference generati...

  4. Low Power CMOS Digitally Controlled Oscillator

    Directory of Open Access Journals (Sweden)

    Sujata Pandey,

    2010-08-01

    Full Text Available Here, two new designs of CMOS digitally controlled oscillators (DCO for low power application have been proposed. First design has been implemented with one driving strength controlled delay cell and withtwo NAND gates used as inverters. The second design with one delay cell and by two NOR gates is presented. The proposed circuits have been simulated in spice with 0.35 μm (micrometer technology at supply voltage of 3.3V. The first design shows 35-40% reduction in power consumption and second design shows 37.5-41.8% power saving as compared to conventional DCO. The frequency range of first and second design varies [3.1316 - 3.1085] GHz and [3.8112 – 3.7867] GHz respectively with the variation in control word from ‘000000’ to ‘000001'. Power consumption of first and second design varies [640.3845 - 700.2977] μW and [617.6616 -6 77.3996] μW respectively.

  5. 14 CFR 27.695 - Power boost and power-operated control system.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Power boost and power-operated control... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Control Systems § 27.695 Power boost and power-operated control system. (a) If a power boost or...

  6. 14 CFR 29.695 - Power boost and power-operated control system.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Power boost and power-operated control... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Control Systems § 29.695 Power boost and power-operated control system. (a) If a power boost or...

  7. Controllable preparation of hierarchically core–shell structure NiO/C microspheres for non-enzymatic glucose sensor

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Zhenzhen; Yin, Haoyong; Nie, Qiulin, E-mail: nieqiulin@hdu.edu.cn

    2015-05-25

    Highlights: • Hierarchically core–shell structure NiO/C microspheres were prepared. • The NiO/C microspheres were obtained via layer-by-layer assembly methods. • The NiO/C sensor shows excellent performance in glucose detection. • Good stability and anti-interference were also obtained on the NiO/C sensor. - Abstract: Hierarchically core–shell structure NiO/C microspheres were controllably fabricated with a facile hydrothermal method via layer-by-layer assembly. The single-/double-/triple-/quadri-shelled NiO/C microspheres were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), and energy dispersive X-ray spectroscopy (EDX). The results showed that the NiO/C composites are flower-like hierarchically structured microspheres composed of the interconnecting porous nanoplates with the thickness of about 50 nm. Every nanoplate is assembled by NiO nanoparticles with diameter about 10 nm. All the multi-shelled NiO/C microspheres show high electro-catalytic activity toward the oxidation of glucose. The double-shelled NiO/C glucose sensor exhibits the best performance with a much wider linear range of 2 μM–1.279 mM, higher sensitivity of 30.19 mA mM{sup −1} cm{sup −2} and lower detection limit of 2 μM. Importantly, long-term stability and favorable anti-interference were obtained thanks to the hierarchically core–shell structure.

  8. Design of Controller for New EAST Fast Control Power Supply

    Institute of Scientific and Technical Information of China (English)

    HUANG Haihong; YIN Ming; WANG Haixin

    2014-01-01

    The effectiveness of the magnetic confinement of plasma can be improved by elongating the plasma cross-section in tokamak devices.But elongated plasma has vertical displacement instability,so a feedback control system is needed to restrain the plasma's vertical displacement.A fast control power supply is needed to excite the active feedback coils,which produces a magnetic field to control the plasma's displacement.With the development of EAST,the fast control power supply needs to keep on enhancing the fast response and output current.The structure of a new power supply is introduced in this paper.The method of multiple inverters paralleled with the current sharing reactor is presented to meet the need for large current and fast control.According to the design demands of the EAST fast control power supply,the adjuster of the current close loop is applied to the inverter,which can advance its ability to restrain the loop current in low frequency and DC output.The result of the experiment confirms the validity of the proposed scheme and control strategy.

  9. Power quality control of an autonomous wind-diesel power system based on hybrid intelligent controller.

    Science.gov (United States)

    Ko, Hee-Sang; Lee, Kwang Y; Kang, Min-Jae; Kim, Ho-Chan

    2008-12-01

    Wind power generation is gaining popularity as the power industry in the world is moving toward more liberalized trade of energy along with public concerns of more environmentally friendly mode of electricity generation. The weakness of wind power generation is its dependence on nature-the power output varies in quite a wide range due to the change of wind speed, which is difficult to model and predict. The excess fluctuation of power output and voltages can influence negatively the quality of electricity in the distribution system connected to the wind power generation plant. In this paper, the authors propose an intelligent adaptive system to control the output of a wind power generation plant to maintain the quality of electricity in the distribution system. The target wind generator is a cost-effective induction generator, while the plant is equipped with a small capacity energy storage based on conventional batteries, heater load for co-generation and braking, and a voltage smoothing device such as a static Var compensator (SVC). Fuzzy logic controller provides a flexible controller covering a wide range of energy/voltage compensation. A neural network inverse model is designed to provide compensating control amount for a system. The system can be optimized to cope with the fluctuating market-based electricity price conditions to lower the cost of electricity consumption or to maximize the power sales opportunities from the wind generation plant.

  10. Adaptive Hierarchical Sliding Mode Control with Input Saturation for Attitude Regulation of Multi-satellite Tethered System

    Science.gov (United States)

    Ma, Zhiqiang; Sun, Guanghui

    2017-06-01

    This paper proposes a novel adaptive hierarchical sliding mode control for the attitude regulation of the multi-satellite inline tethered system, where the input saturation is taken into account. The governing equations for the attitude dynamics of the three-satellite inline tethered system are derived firstly by utilizing Lagrangian mechanics theory. Considering the fact that the attitude of the central satellite can be adjusted by using the simple exponential stabilization scheme, the decoupling of the central satellite and the terminal ones is presented, and in addition, the new adaptive sliding mode control law is applied to stabilize the attitude dynamics of the two terminal satellites based on the synchronization and partial contraction theory. In the adaptive hierarchical sliding mode control design, the input is modeled as saturated input due to the fact that the flywheel torque is bounded, and meanwhile, an adaptive update rate is introduced to eliminate the effect of the saturated input and the external perturbation. The proposed control scheme can be applied on the two-satellite system to achieve fixed-point rotation. Numerical results validate the effectiveness of the proposed method.

  11. Adaptive Hierarchical Sliding Mode Control with Input Saturation for Attitude Regulation of Multi-satellite Tethered System

    Science.gov (United States)

    Ma, Zhiqiang; Sun, Guanghui

    2016-11-01

    This paper proposes a novel adaptive hierarchical sliding mode control for the attitude regulation of the multi-satellite inline tethered system, where the input saturation is taken into account. The governing equations for the attitude dynamics of the three-satellite inline tethered system are derived firstly by utilizing Lagrangian mechanics theory. Considering the fact that the attitude of the central satellite can be adjusted by using the simple exponential stabilization scheme, the decoupling of the central satellite and the terminal ones is presented, and in addition, the new adaptive sliding mode control law is applied to stabilize the attitude dynamics of the two terminal satellites based on the synchronization and partial contraction theory. In the adaptive hierarchical sliding mode control design, the input is modeled as saturated input due to the fact that the flywheel torque is bounded, and meanwhile, an adaptive update rate is introduced to eliminate the effect of the saturated input and the external perturbation. The proposed control scheme can be applied on the two-satellite system to achieve fixed-point rotation. Numerical results validate the effectiveness of the proposed method.

  12. Simulation and Control Lab Development for Power and Energy Management for NASA Manned Deep Space Missions

    Science.gov (United States)

    McNelis, Anne M.; Beach, Raymond F.; Soeder, James F.; McNelis, Nancy B.; May, Ryan; Dever, Timothy P.; Trase, Larry

    2014-01-01

    The development of distributed hierarchical and agent-based control systems will allow for reliable autonomous energy management and power distribution for on-orbit missions. Power is one of the most critical systems on board a space vehicle, requiring quick response time when a fault or emergency is identified. As NASAs missions with human presence extend beyond low earth orbit autonomous control of vehicle power systems will be necessary and will need to reliably function for long periods of time. In the design of autonomous electrical power control systems there is a need to dynamically simulate and verify the EPS controller functionality prior to use on-orbit. This paper presents the work at NASA Glenn Research Center in Cleveland, Ohio where the development of a controls laboratory is being completed that will be utilized to demonstrate advanced prototype EPS controllers for space, aeronautical and terrestrial applications. The control laboratory hardware, software and application of an autonomous controller for demonstration with the ISS electrical power system is the subject of this paper.

  13. Power control for hot gas engines

    Science.gov (United States)

    Macglashan, W. F. (Inventor)

    1980-01-01

    A hot gas engine in which the expander piston of the engine is connected to an expander crankshaft. A displacer piston of the engine is connected to a separate displacer crankshaft which may or may not be coaxial with the expander crankshaft. A phase angle control mechanism used as a power control for changing the phase angle between the expander and displacer crankshaft is located between the two crankshafts. The phase angle control mechanism comprises a differential type mechanism comprised of a pair of gears, as for example, bevel gears, one of which is connected to one end of the expander crankshaft and the other of which is connected to the opposite end of the displacer crankshaft. A mating bevel gear is disposed in meshing engagement with the first two level gears to provide a phase angle control between the two crankshafts. Other forms of differential mechanisms may be used including conventional spur gears connected in a differential type arrangement.

  14. Control voltage and power fluctuations when connecting wind farms

    Energy Technology Data Exchange (ETDEWEB)

    Berinde, Ioan, E-mail: ioan-berinde@yahoo.com; Bălan, Horia, E-mail: hbalan@mail.utcluj.ro; Oros, Teodora Susana, E-mail: teodoraoros-87@yahoo.com [Technical University of Cluj-Napoca, Romania, Faculty of Electrical Engineering, Department of Power Engineering and Management (Romania)

    2015-12-23

    Voltage, frequency, active power and reactive power are very important parameters in terms of power quality. These parameters are followed when connecting any power plant, the more the connection of wind farms. Connecting wind farms to the electricity system must not cause interference outside the limits set by regulations. Modern solutions for fast and automatic voltage control and power fluctuations using electronic control systems of reactive power flows. FACTS (Flexible Alternating Current Transmision System) systems, established on the basis of power electronic circuits ensure control of electrical status quantities to achieve the necessary transfer of power to the power grid. FACTS devices can quickly control parameters and sizes of state power lines, such as impedance line voltages and phase angles of the voltages of the two ends of the line. Their use can lead to improvement in power system operation by increasing the transmission capacity of power lines, power flow control lines, improved static and transient stability reserve.

  15. Autonomous Control of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Basher, H.

    2003-10-20

    A nuclear reactor is a complex system that requires highly sophisticated controllers to ensure that desired performance and safety can be achieved and maintained during its operations. Higher-demanding operational requirements such as reliability, lower environmental impacts, and improved performance under adverse conditions in nuclear power plants, coupled with the complexity and uncertainty of the models, necessitate the use of an increased level of autonomy in the control methods. In the opinion of many researchers, the tasks involved during nuclear reactor design and operation (e.g., design optimization, transient diagnosis, and core reload optimization) involve important human cognition and decisions that may be more easily achieved with intelligent methods such as expert systems, fuzzy logic, neural networks, and genetic algorithms. Many experts in the field of control systems share the idea that a higher degree of autonomy in control of complex systems such as nuclear plants is more easily achievable through the integration of conventional control systems and the intelligent components. Researchers have investigated the feasibility of the integration of fuzzy logic, neural networks, genetic algorithms, and expert systems with the conventional control methods to achieve higher degrees of autonomy in different aspects of reactor operations such as reactor startup, shutdown in emergency situations, fault detection and diagnosis, nuclear reactor alarm processing and diagnosis, and reactor load-following operations, to name a few. With the advancement of new technologies and computing power, it is feasible to automate most of the nuclear reactor control and operation, which will result in increased safety and economical benefits. This study surveys current status, practices, and recent advances made towards developing autonomous control systems for nuclear reactors.

  16. Controllable synthesis of branched ZnO/Si nanowire arrays with hierarchical structure.

    Science.gov (United States)

    Huang, Shengli; Yang, Qianqian; Yu, Binbin; Li, Dingguo; Zhao, Ruisheng; Li, Shuping; Kang, Junyong

    2014-01-01

    A rational approach for creating branched ZnO/Si nanowire arrays with hierarchical structure was developed based on a combination of three simple and cost-effective synthesis pathways. The crucial procedure included growth of crystalline Si nanowire arrays as backbones by chemical etching of Si substrates, deposition of ZnO thin film as a seed layer by magnetron sputtering, and fabrication of ZnO nanowire arrays as branches by hydrothermal growth. The successful synthesis of ZnO/Si heterogeneous nanostructures was confirmed by morphologic, structural, and optical characterizations. The roles of key experimental parameters, such as the etchant solution, the substrate direction, and the seed layer on the hierarchical nanostructure formation, were systematically investigated. It was demonstrated that an etchant solution with an appropriate redox potential of the oxidant was crucial for a moderate etching speed to achieve a well-aligned Si nanowire array with solid and round surface. Meanwhile, the presence of gravity gradient was a key issue for the growth of branched ZnO nanowire arrays. The substrate should be placed vertically or facedown in contrast to the solution surface during the hydrothermal growth. Otherwise, only the condensation of the ZnO nanoparticles took place in a form of film on the substrate surface. The seed layer played another important role in the growth of ZnO nanowire arrays, as it provided nucleation sites and determined the growing direction and density of the nanowire arrays for reducing the thermodynamic barrier. The results of this study might provide insight on the synthesis of hierarchical three-dimensional nanostructure materials and offer an approach for the development of complex devices and advanced applications.

  17. Wide-Area Robust Decentralized Coordinated Control of HVDC Power System Based on Polytopic System Theory

    Directory of Open Access Journals (Sweden)

    Shiyun Xu

    2015-01-01

    Full Text Available The present study proposes a hierarchical wide-area decentralized coordinated control framework for HVDC power system that is robust to multiple operating conditions. The upper level wide-area coordinated controller is designed in the form of dynamic output feedback control that coordinates the lower level HVDC supplementary controller, PSS, and SVC. In order to enhance the robustness of the designed controller under various operating conditions, the polytopic model is introduced such that the closed-loop control system can be operated under strong damping mode in virtue of the stability criterion based on damping ratio. Simulation results demonstrate that the proposed controller design algorithm is capable of enhancing the system damping over four different conditions.

  18. Automation of control and analysis of execution of official duties and instructions in the hierarchical organization

    Directory of Open Access Journals (Sweden)

    Demchenko A.I.

    2017-01-01

    Full Text Available The article considers the problem of monitoring over execution of official duties of employees. This problem is characteristic of the enterprises having a hierarchical management structure. The functions and the modes of monitoring are defined, the types of analysis of the staff activities are provided. The description of the program complex allowing distributing functions and instructions for between the employees is given. The developed computer program allows tracking the performance, creating reports. The computer program has a demarcation of access rights and provides the can be operated in both local, and a large-scale network.

  19. A hyperaccumulation pathway to three-dimensional hierarchical porous nanocomposites for highly robust high-power electrodes

    Science.gov (United States)

    Zhu, Jian; Shan, Yu; Wang, Tao; Sun, Hongtao; Zhao, Zipeng; Mei, Lin; Fan, Zheng; Xu, Zhi; Shakir, Imran; Huang, Yu; Lu, Bingan; Duan, Xiangfeng

    2016-11-01

    Natural plants consist of a hierarchical architecture featuring an intricate network of highly interconnected struts and channels that not only ensure extraordinary structural stability, but also allow efficient transport of nutrients and electrolytes throughout the entire plants. Here we show that a hyperaccumulation effect can allow efficient enrichment of selected metal ions (for example, Sn2+, Mn2+) in the halophytic plants, which can then be converted into three-dimensional carbon/metal oxide (3DC/MOx) nanocomposites with both the composition and structure hierarchy. The nanocomposites retain the 3D hierarchical porous network structure, with ultrafine MOx nanoparticles uniformly distributed in multi-layers of carbon derived from the cell wall, cytomembrane and tonoplast. It can simultaneously ensure efficient electron and ion transport and help withstand the mechanical stress during the repeated electrochemical cycles, enabling the active material to combine high specific capacities typical of batteries and the cycling stability of supercapacitors.

  20. Power Electronics Control of Wind Energy in Distributed Power System

    DEFF Research Database (Denmark)

    Iov, Florin; Ciobotaru, Mihai; Blaabjerg, Frede

    2008-01-01

    is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. The other is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most...... emerging renewable energy sources, wind energy, which by means of power electronics are changing from being a minor energy source to be acting as an important power source in the energy system. Power electronics is the enabling technology and the presentation will cover the development in wind turbine...... technology from kW to MW, discuss which power electronic solutions are most feasible and used today....

  1. Power factor control system for ac induction motors

    Science.gov (United States)

    Nola, F. J. (Inventor)

    1981-01-01

    A power control circuit for an induction motor is disclosed in which a servo loop is used to control power input by controlling the power factor of motor operation. The power factor is measured by summing the voltage and current derived square wave signals.

  2. Trend of Control Technique of Power Electronic Equipments for Power System

    Science.gov (United States)

    Kimura, Noriyuki; Nakajima, Tatsuhito; Gibo, Naoki

    This paper aims to introduce recent topics about the control technique of power electronic equipments for power system. the control technique is explained from the view points of the power system control, the local system control and the converter control. The installation of STATCOM in Japan and UPFC in Korea are mentioned as the examples.

  3. Distributed solid state programmable thermostat/power controller

    Science.gov (United States)

    Alexander, Jane C. (Inventor); Howard, David E. (Inventor); Smith, Dennis A. (Inventor)

    2008-01-01

    A self-contained power controller having a power driver switch, programmable controller, communication port, and environmental parameter measuring device coupled to a controllable device. The self-contained power controller needs only a single voltage source to power discrete devices, analog devices, and the controlled device. The programmable controller has a run mode which, when selected, upon the occurrence of a trigger event changes the state of a power driver switch and wherein the power driver switch is maintained by the programmable controller at the same state until the occurrence of a second event.

  4. Integrating Autonomous Load Controllers in Power Systems

    DEFF Research Database (Denmark)

    Douglass, Philip James

    violations of voltage constraints. This voltage-sensitive controller can also operate alone, without the frequency-sensitive controller, to provide voltage regulation service and increase load diversity in any distribution network where lower voltage level corresponds to higher load.The frequency......-sensitive and voltage-sensitive autonomous load are viable alternatives to conventional frequency and voltage control devices. When used in combination, they complement each other. In systems where the operator has centrally dispatchable resources to regulate frequency, these resources can be used to dispatch otherwise...... autonomous frequency-sensitive loads. Moreover, where centrally dispatchable frequency regulation resources can rapidly change operating points, such as in a micro-grid, the energy sources can be used as transmitters for a ultra-low-bandwidth uni-directional power line communication system....

  5. Controllable synthesis of ZnO hierarchical architectures and their photocatalytic property

    Science.gov (United States)

    Fang, Linxia; Zhang, Baoliang; Li, Wei; Li, Xiangjie; Xin, Tinjun; Zhang, Qiuyu

    2014-11-01

    A facile solution route to synthesize ZnO hierarchical architectures was carried out employing trisodium citrate as structure-directing agent. Three different morphologies and crystal phase samples, including double-layer hexagonal prism ascribed to wurtzite ZnO (JCPDS No. 36-1451), porous microspheres ascribed to an unusual ZnO phase (JCPDS No. 21-1486) and smooth solid amorphous zinc citrate microsphere, were obtained. FESEM, TEM, XRD and FT-IR spectroscope were used to investigate the structure character of the products. The influence of the citrate concentration on ZnO microstructure was studied. It was found that the citrate concentration played a key role in evolution of the morphology and crystal phase. On the basis of experimental results, a possible formation mechanism of the ZnO hierarchical nanostructures was proposed. Photocatalytic property of the samples was evaluated by photodegradation reaction of methylene blue (MB) under UV irradiation. Among these products, double-layer hexagonal prism samples exhibited the highest photocatalytic activity.

  6. Power electronics and control for wind power systems

    DEFF Research Database (Denmark)

    Iov, Florin; Blaabjerg, Frede

    2009-01-01

    the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most emerging...... renewable energy sources, wind energy, which by means of power electronics are changing from being minor energy sources to be acting as important power sources in the electrical network.......The global electrical energy consumption is still rising and there is a steady demand to increase the power capacity. It is expected that it has to be doubled within 20 years. The production, distribution and use of the energy should be as technological efficient as possible and incentives to save...

  7. FPGA for Power Control of MSL Avionics

    Science.gov (United States)

    Wang, Duo; Burke, Gary R.

    2011-01-01

    A PLGT FPGA (Field Programmable Gate Array) is included in the LCC (Load Control Card), GID (Guidance Interface & Drivers), TMC (Telemetry Multiplexer Card), and PFC (Pyro Firing Card) boards of the Mars Science Laboratory (MSL) spacecraft. (PLGT stands for PFC, LCC, GID, and TMC.) It provides the interface between the backside bus and the power drivers on these boards. The LCC drives power switches to switch power loads, and also relays. The GID drives the thrusters and latch valves, as well as having the star-tracker and Sun-sensor interface. The PFC drives pyros, and the TMC receives digital and analog telemetry. The FPGA is implemented both in Xilinx (Spartan 3- 400) and in Actel (RTSX72SU, ASX72S). The Xilinx Spartan 3 part is used for the breadboard, the Actel ASX part is used for the EM (Engineer Module), and the pin-compatible, radiation-hardened RTSX part is used for final EM and flight. The MSL spacecraft uses a FC (Flight Computer) to control power loads, relays, thrusters, latch valves, Sun-sensor, and star-tracker, and to read telemetry such as temperature. Commands are sent over a 1553 bus to the MREU (Multi-Mission System Architecture Platform Remote Engineering Unit). The MREU resends over a remote serial command bus c-bus to the LCC, GID TMC, and PFC. The MREU also sends out telemetry addresses via a remote serial telemetry address bus to the LCC, GID, TMC, and PFC, and the status is returned over the remote serial telemetry data bus.

  8. Wind power integration into the automatic generation control of power systems with large-scale wind power

    DEFF Research Database (Denmark)

    Basit, Abdul; Hansen, Anca Daniela; Altin, Müfit

    2014-01-01

    Transmission system operators have an increased interest in the active participation of wind power plants (WPP) in the power balance control of power systems with large wind power penetration. The emphasis in this study is on the integration of WPPs into the automatic generation control (AGC......) of the power system. The present paper proposes a coordinated control strategy for the AGC between combined heat and power plants (CHPs) and WPPs to enhance the security and the reliability of a power system operation in the case of a large wind power penetration. The proposed strategy, described...... and exemplified for the future Danish power system, takes the hour-ahead regulating power plan for generation and power exchange with neighbouring power systems into account. The performance of the proposed strategy for coordinated secondary control is assessed and discussed by means of simulations for different...

  9. Precise size control over ultrafine rutile titania nanocrystallites in hierarchical nanotubular silica/titania hybrids with efficient photocatalytic activity.

    Science.gov (United States)

    Gu, Yuanqing; Huang, Jianguo

    2013-08-12

    Hierarchical-structured nanotubular silica/titania hybrids incorporated with particle-size-controllable ultrafine rutile titania nanocrystallites were realized by deposition of ultrathin titania sandwiched silica gel films onto each nanofiber of natural cellulose substances (e.g., common commercial filter paper) and subsequent flame burning in air. The rapid flame burning transforms the initially amorphous titania into rutile phase titania, and the silica gel films suppress the crystallite growth of rutile titania, thereby achieving nano-precise size regulation of ultrafine rutile titania nanocrystallites densely embedded in the silica films of the nanotubes. The average diameters of these nanocrystallites are adjustable in a range of approximately 3.3-16.0 nm by a crystallite size increment rate of about 2.4 nm per titania deposition cycle. The silica films transfer the electrons activated by crystalline titania and generate catalytic reactive species at the outer surface. The size-tuned ultrafine rutile titania nanocrystallites distributed in the unique hierarchical networks significantly improve the photocatalytic performance of the rutile phase titania, thereby enabling a highly efficient photocatalytic degradation of the methylene blue dye under ultraviolet light irradiation, which is even superior to the pure anatase-titania-based materials. The facile stepwise size control of the rutile titania crystallites described here opens an effective pathway for the design and preparation of fine-nanostructured rutile phase titania materials to explore potential applications.

  10. Unified power flow controller: Modeling, stability analysis, control strategy and control system design

    Science.gov (United States)

    Sreenivasachar, Kannan

    2001-07-01

    Unified power flow controller (UPFC) has been the most versatile Flexible AC Transmission System (FACTS) device due to its ability to control real and reactive power flow on transmission lines while controlling the voltage of the bus to which it is connected. UPFC being a multi-variable power system controller it is necessary to analyze its effect on power system operation. To study the performance of the UPFC in damping power oscillations using PSCAD-EMTDC software, a de-coupled control system has been designed for the shunt inverter to control the UPFC bus voltage and the DC link capacitor voltage. The series inverter of a UPFC controls the real power flow in the transmission line. One problem associated with using a high gain PI controller (used to achieve fast control of transmission line real power flow) for the series inverter of a UPFC to control the real power flow in a transmission line is the presence of low damping. This problem is solved in this research by using a fuzzy controller. A method to model a fuzzy controller in PSCAD-EMTDC software has also been described. Further, in order to facilitate proper operation between the series and the shunt inverter control system, a new real power coordination controller has been developed and its performance was evaluated. The other problem concerning the operation of a UPFC is with respect to transmission line reactive power flow control. Step changes to transmission line reactive power references have significant impact on the UPFC bus voltage. To reduce the adverse effect of step changes in transmission line reactive power references on the UPFC bus voltage, a new reactive power coordination controller has been designed. Transient response studies have been conducted using PSCAD-EMTDC software to show the improvement in power oscillation damping with UPFC. These simulations include the real and reactive power coordination controllers. Finally, a new control strategy has been proposed for UPFC. In this

  11. Controlled synthesis, growth mechanism and highly efficient solar photocatalysis of nitrogen-doped bismuth subcarbonate hierarchical nanosheets architectures.

    Science.gov (United States)

    Dong, Fan; Sun, Yanjuan; Ho, Wing-Kei; Wu, Zhongbiao

    2012-07-21

    The synthesis and self-assembly of hierarchical architectures from nanoscale building blocks with unique morphology, orientation and dimension have opened up new opportunities to enhance their functional performances and remain a great challenge. This work represents tunable synthesis of various types of 3D monodisperse in situ N-doped (BiO)(2)CO(3) hierarchical architectures composed of 2D single-crystal nanosheets with dominant (001) facets by a one-pot template-free hydrothermal method from bismuth citrate and ammonia solution. Depending on the concentration of ammonia solution, the morphology of N-doped (BiO)(2)CO(3), including dandelion-like, hydrangea-like and peony flower-like microspheres, can be selectively constructed due to different self-assembly patterns of nanosheets. It was revealed that the ammonia played dual roles in the formation of N-doped (BiO)(2)CO(3) architectures. One is to hydrolyze bismuth citrate, and the other is to behave as a nitrogen doping source. The in situ doped nitrogen substituted for oxygen in (BiO)(2)CO(3) and subsequently narrowed the band gap, making N-doped (BiO)(2)CO(3) visible light active. Due to the special nanosheets architectures, the prepared various N-doped (BiO)(2)CO(3) materials exhibited especially efficient photocatalytic activity and high durability for the removal of NO in air under both visible and UV light irradiation. Based on the direct observation of the growth process with respect to phase structure, chemical composition and morphological structure, a novel growth mechanism is revealed, which involves a unique multistep pathway, including reaction-nucleation, aggregation, crystallization, dissolution-recrystallization, and Ostwald ripening. The facile synthesis approach and the proposed growth mechanism could provide new insights into the design and controlled synthesis of inorganic hierarchical materials with new or enhanced properties.

  12. Investigating power control in autonomous power systems with increasing wind power penetration

    Energy Technology Data Exchange (ETDEWEB)

    Margaris, Ioannis D. [National Technical Univ. of Athens (Greece). Electric Energy Systems Lab.; Hansen, Anca D.; Sorensen, Poul [Risoe National Laboratory, Roskilde (Denmark). Wind Energy Dept.; Hatziargyriou, Nikos D. [National Technical Univ. of Athens (Greece). Electric Energy Systems Lab.; Public Power Corporation S.A., Athens (Greece)

    2009-07-01

    Increasing levels of wind penetration in autonomous power systems has set intensively high standards with respect to wind turbine technology during the last years. Special features of non-interconnected power systems make security issues rather critical, as the operation of large wind farms like conventional power plants is becoming a necessity. This paper includes the study case of Rhodos island, in Greece, where rapidly increasing wind penetration has started to impose serious security issues for the immediate future. The scenarios studied here correspond to reference year of study 2012 and include wind farms with three different wind turbine technologies - namely Doubly Fed Induction Generator (DFIG), Permanent Magnet Synchronous Generator (PMSG) and Active Stall Induction Generator (ASIG) based wind turbines. Aggregated models of the wind farms are being used and results for different load cases are being analyzed and discussed. The ability of wind farms to assist in some of the power system control services traditionally carried out by conventional synchronous generation is being investigated and discussed. The power grid of the island, including speed governors and automatic voltage regulators, is simulated in the dedicated power system simulation program Power Factory from DIgSILENT. (orig.)

  13. Impact of wind power in autonomous power systems—power fluctuations—modelling and control issues

    DEFF Research Database (Denmark)

    Margaris, Ioannis D.; Hansen, Anca Daniela; Cutululis, Nicolaos Antonio;

    2011-01-01

    technologies, power system protection and load. Analytical models for wind farms with three different wind turbine technologies, namely Doubly Fed Induction Generator, Permanent Magnet Synchronous Generator and Active Stall Induction Generator-based wind turbines, are included. Likewise, analytical models...... for diesel and steam generation plants are applied. The power grid, including speed governors, automatic voltage regulators, protection system and loads is modelled in the same platform. Results for different load and wind profile cases are being presented for the case study of the island Rhodes, in Greece......This paper describes a detailed modelling approach to study the impact of wind power fluctuations on the frequency control in a non-interconnected system with large-scale wind power. The approach includes models for wind speed fluctuations, wind farm technologies, conventional generation...

  14. Use of UPFC device controlled by fuzzy logic controllers for decoupled power flow control

    Directory of Open Access Journals (Sweden)

    Ivković Sanja

    2014-01-01

    Full Text Available This paper investigates the possibility of decoupled active and reactive power flow control in a power system using a UPFC device controlled by fuzzy logic controllers. A Brief theoretical review of the operation principles and applications of UPFC devices and design principles of the fuzzy logic controller used are given. A Matlab/Simulink model of the system with UPFC, the fuzzy controller setup, and graphs of the results are presented. Conclusions are drawn regarding the possibility of using this system for decoupled control of the power flow in power systems based on analysis of these graphs.

  15. A Turbine-powered UAV Controls Testbed

    Science.gov (United States)

    Motter, Mark A.; High, James W.; Guerreiro, Nelson M.; Chambers, Ryan S.; Howard, Keith D.

    2007-01-01

    The latest version of the NASA Flying Controls Testbed (FLiC) integrates commercial-off-the-shelf components including airframe, autopilot, and a small turbine engine to provide a low cost experimental flight controls testbed capable of sustained speeds up to 200 mph. The series of flight tests leading up to the demonstrated performance of the vehicle in sustained, autopiloted 200 mph flight at NASA Wallops Flight Facility's UAV runway in August 2006 will be described. Earlier versions of the FLiC were based on a modified Army target drone, AN/FQM-117B, developed as part of a collaboration between the Aviation Applied Technology Directorate at Fort Eustis, Virginia and NASA Langley Research Center. The newer turbine powered platform (J-FLiC) builds on the successes using the relatively smaller, slower and less expensive unmanned aerial vehicle developed specifically to test highly experimental flight control approaches with the implementation of C-coded experimental controllers. Tracking video was taken during the test flights at Wallops and will be available for presentation at the conference. Analysis of flight data from both remotely piloted and autopiloted flights will be presented. Candidate experimental controllers for implementation will be discussed. It is anticipated that flight testing will resume in Spring 2007 and those results will be included, if possible.

  16. A Hierarchical Reliability Control Method for a Space Manipulator Based on the Strategy of Autonomous Decision-Making

    Directory of Open Access Journals (Sweden)

    Xin Gao

    2016-01-01

    Full Text Available In order to maintain and enhance the operational reliability of a robotic manipulator deployed in space, an operational reliability system control method is presented in this paper. First, a method to divide factors affecting the operational reliability is proposed, which divides the operational reliability factors into task-related factors and cost-related factors. Then the models describing the relationships between the two kinds of factors and control variables are established. Based on this, a multivariable and multiconstraint optimization model is constructed. Second, a hierarchical system control model which incorporates the operational reliability factors is constructed. The control process of the space manipulator is divided into three layers: task planning, path planning, and motion control. Operational reliability related performance parameters are measured and used as the system’s feedback. Taking the factors affecting the operational reliability into consideration, the system can autonomously decide which control layer of the system should be optimized and how to optimize it using a control level adjustment decision module. The operational reliability factors affect these three control levels in the form of control variable constraints. Simulation results demonstrate that the proposed method can achieve a greater probability of meeting the task accuracy requirements, while extending the expected lifetime of the space manipulator.

  17. Controlling Hierarchically Self-Assembly in Supramolecular Tailed-Dendron Systems

    Science.gov (United States)

    Merlet-Lacroix, Nathalie; Rao, Jingui; Zhang, Afang; Schlüter, Dieter; Ruokolainen, Janne; Mezzenga, Raffaele

    2010-03-01

    We study the self-assembly of a dendritic macromolecular system formed by a second-generation dendron and a polymer chain emanating from its focal point. We use supramolecular ionic interactions to attach to the periphery of the dendrons sulphated alkyl tails. The resulting ``triblock copolymers'' have a molecular architecture similar to a four-arm pitchfork with varying arms and holder lengths. The bulk morphologies observed by SAXS and TEM show thermodynamically stable, hierarchical ``inverted'' hexagonal or lamellar structures. The structural models for the molecular packing emerging from experimental findings are benchmarked to available self-consistent field theories (SCFT) and experiments and theoretical predictions are found in perfect agreement. The present results show that supramolecular systems based on tailed dendrons and surfactants can be used to scale up of the structural organization from the liquid crystalline length scale to the block copolymer length scale, while preserving the inverted unconventional morphologies offering new possibilities in the design of nanostructured materials.

  18. Digitally Controlled High Availability Power Supply

    Energy Technology Data Exchange (ETDEWEB)

    MacNair, David; /SLAC

    2009-05-07

    This paper will report on the test results of a prototype 1320 watt power module for a high availability power supply. The module will allow parallel operation for N+1 redundancy with hot swap capability. The two quadrant output of each module allows pairs of modules to provide a 4 quadrant (bipolar) operation. Each module employs a novel 4 FET buck regulator arranged in a bridge configuration. Each side of the bridge alternately conducts through a small saturable ferrite that limits the reverse current in the FET body diode during turn off. This allows hard switching of the FETs with low switching losses. The module is designed with over-rated components to provide high reliability and better then 97% efficiency at full load. The modules use a Microchip DSP for control, monitoring, and fault detection. The switching FETS are driven by PWM modules in the DSP at 60 KHz. A Dual CAN bus interface provides for low cost redundant control paths. The DSP will also provide current sharing between modules, synchronized switching, and soft start up for hot swapping. The input and output of each module have low resistance FETs to allow hot swapping and isolation of faulted units.

  19. Micromechanics of hierarchical materials

    DEFF Research Database (Denmark)

    Mishnaevsky, Leon, Jr.

    2012-01-01

    A short overview of micromechanical models of hierarchical materials (hybrid composites, biomaterials, fractal materials, etc.) is given. Several examples of the modeling of strength and damage in hierarchical materials are summarized, among them, 3D FE model of hybrid composites...... with nanoengineered matrix, fiber bundle model of UD composites with hierarchically clustered fibers and 3D multilevel model of wood considered as a gradient, cellular material with layered composite cell walls. The main areas of research in micromechanics of hierarchical materials are identified, among them......, the investigations of the effects of load redistribution between reinforcing elements at different scale levels, of the possibilities to control different material properties and to ensure synergy of strengthening effects at different scale levels and using the nanoreinforcement effects. The main future directions...

  20. Hierarchical auxetic mechanical metamaterials.

    Science.gov (United States)

    Gatt, Ruben; Mizzi, Luke; Azzopardi, Joseph I; Azzopardi, Keith M; Attard, Daphne; Casha, Aaron; Briffa, Joseph; Grima, Joseph N

    2015-02-11

    Auxetic mechanical metamaterials are engineered systems that exhibit the unusual macroscopic property of a negative Poisson's ratio due to sub-unit structure rather than chemical composition. Although their unique behaviour makes them superior to conventional materials in many practical applications, they are limited in availability. Here, we propose a new class of hierarchical auxetics based on the rotating rigid units mechanism. These systems retain the enhanced properties from having a negative Poisson's ratio with the added benefits of being a hierarchical system. Using simulations on typical hierarchical multi-level rotating squares, we show that, through design, one can control the extent of auxeticity, degree of aperture and size of the different pores in the system. This makes the system more versatile than similar non-hierarchical ones, making them promising candidates for industrial and biomedical applications, such as stents and skin grafts.

  1. Hierarchical Auxetic Mechanical Metamaterials

    Science.gov (United States)

    Gatt, Ruben; Mizzi, Luke; Azzopardi, Joseph I.; Azzopardi, Keith M.; Attard, Daphne; Casha, Aaron; Briffa, Joseph; Grima, Joseph N.

    2015-02-01

    Auxetic mechanical metamaterials are engineered systems that exhibit the unusual macroscopic property of a negative Poisson's ratio due to sub-unit structure rather than chemical composition. Although their unique behaviour makes them superior to conventional materials in many practical applications, they are limited in availability. Here, we propose a new class of hierarchical auxetics based on the rotating rigid units mechanism. These systems retain the enhanced properties from having a negative Poisson's ratio with the added benefits of being a hierarchical system. Using simulations on typical hierarchical multi-level rotating squares, we show that, through design, one can control the extent of auxeticity, degree of aperture and size of the different pores in the system. This makes the system more versatile than similar non-hierarchical ones, making them promising candidates for industrial and biomedical applications, such as stents and skin grafts.

  2. 分层递阶多模型自适应解耦控制器%Multivariable Adaptive Decoupling Controller Using Hierarchical Multiple Models

    Institute of Scientific and Technical Information of China (English)

    王昕; 李少远; 岳恒

    2005-01-01

    To solve the problem such as too many models, long computing time and so on, a hierarchical multiple models direct adaptive decoupling controller is designed. It consists of multiple levels. In the upper level, the best model is chosen according to the switching index. Then multiple fixed models are constructed on line to cover the region which the above chosen fixed model lies in.In the last level, one free-running and one re-initialized adaptive model are added to guarantee the stability and improve the transient response. By selection of the weighting polynomial matrix, it not only eliminates the steady output error and places the poles of the closed loop system arbitrarily, but also decouples the system dynamically. At last, for this multiple models switching system, global convergence is obtained under common assumptions. Compared with the conventional multiple models adaptive controller, it reduces the number of the fixed models greatly. If the same number of the fixed models is used, the system transient response and decoupling result are improved. The simulation example illustrates the power of the derived controller.

  3. Retrofitting automated process control systems at Ukrainian power stations

    Energy Technology Data Exchange (ETDEWEB)

    B.E. Simkin; V.S. Naumchik; B.D. Kozitskii (and others) [OAO L' vovORGRES, Lviv (Ukraine)

    2008-04-15

    Approaches and principles for retrofitting automated process control systems at Ukrainian power stations are considered. The results obtained from retrofitting the monitoring and control system of Unit 9 at the Burshtyn thermal power station are described.

  4. A hybrid electromechanical solid state switch for ac power control

    Science.gov (United States)

    1972-01-01

    Bidirectional thyristor coupled to a series of actuator driven electromechanical contacts generates hybrid electromechanical solid state switch for ac power control. Device is useful in power control applications where zero crossover switching is required.

  5. Hierarchical nitrogen doped bismuth niobate architectures: Controllable synthesis and excellent photocatalytic activity

    Energy Technology Data Exchange (ETDEWEB)

    Hou, Jungang, E-mail: lorinhjg@yahoo.com.cn [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Cao, Rui; Wang, Zheng [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Jiao, Shuqiang, E-mail: sjiao@ustb.edu.cn [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Zhu, Hongmin [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083 (China)

    2012-05-30

    Graphical abstract: Efficient visible-light-driven photocatalysts of peony-like nitrogen doped Bi{sub 3}NbO{sub 7} hierarchical architectures and silver-layered Bi{sub 3}NbO{sub 7-x}Nx heterostructures were successfully synthesized in this discovery. Highlights: Black-Right-Pointing-Pointer N-Bi{sub 3}NbO{sub 7} architectures were synthesized via two-step hydrothermal process. Black-Right-Pointing-Pointer Electronic structure calculations indicated that N replaced O in samples. Black-Right-Pointing-Pointer Growth mechanism is proposed for transformation of nanoparticles to microflowers. Black-Right-Pointing-Pointer Excellent activities of N-Bi{sub 3}NbO{sub 7} architectures were obtained for degradation. Black-Right-Pointing-Pointer Enhanced photocatalytic performance was observed for Ag/N-Bi{sub 3}NbO{sub 7} architectures. - Abstract: Nitrogen doped bismuth niobate (N-Bi{sub 3}NbO{sub 7}) hierarchical architectures were synthesized via a facile two-step hydrothermal process. XRD patterns revealed that the defect fluorite-type crystal structure of Bi{sub 3}NbO{sub 7} remained intact upon nitrogen doping. Electron microscopy showed the N-Bi{sub 3}NbO{sub 7} architecture has a unique peony-like spherical superstructure composed of numerous nanosheets. UV-vis spectra indicated that nitrogen doping in the compound results in a red-shift of the absorption edge from 450 nm to 470 nm. XPS indicated that [Bi/Nb]-N bonds were formed by inducing nitrogen to replace a small amount of oxygen in Bi{sub 3}NbO{sub 7-x}N{sub x}, which is explained by electronic structure calculations including energy band and density of states. Based on observations of architectures formation, a possible growth mechanism was proposed to explain the transformation of polyhedral-like nanoparticles to peony-like microflowers via an Ostwald riping mechanism followed by self-assembly. The N-Bi{sub 3}NbO{sub 7} architectures due to the large specific surface area and nitrogen doping exhibited higher

  6. 21 CFR 890.3725 - Powered environmental control system.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Powered environmental control system. 890.3725... environmental control system. (a) Identification. A powered environmental control system is an AC- or battery-powered device intended for medical purposes that is used by a patient to operate an environmental...

  7. Introducing Model Predictive Control for Improving Power Plant Portfolio Performance

    DEFF Research Database (Denmark)

    Edlund, Kristian Skjoldborg; Bendtsen, Jan Dimon; Børresen, Simon

    2008-01-01

    This paper introduces a model predictive control (MPC) approach for construction of a controller for balancing the power generation against consumption in a power system. The objective of the controller is to coordinate a portfolio consisting of multiple power plant units in the effort to perform...

  8. 14 CFR 23.1142 - Auxiliary power unit controls.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Auxiliary power unit controls. 23.1142... Powerplant Controls and Accessories § 23.1142 Auxiliary power unit controls. Means must be provided on the... power unit....

  9. Spectrum management considerations of adaptive power control in satellite networks

    Science.gov (United States)

    Sawitz, P.; Sullivan, T.

    1983-01-01

    Adaptive power control concepts for the compensation of rain attenuation are considered for uplinks and downlinks. The performance of example power-controlled and fixed-EIRP uplinks is compared in terms of C/Ns and C/Is. Provisional conclusions are drawn with regard to the efficacy of uplink and downlink power control orbit/spectrum utilization efficiency.

  10. 7 CFR 917.33 - Powers of Control Committee.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Powers of Control Committee. 917.33 Section 917.33... CALIFORNIA Order Regulating Handling Administrative Bodies § 917.33 Powers of Control Committee. The Control Committee shall have the following powers: (a) To administer, as specifically provided in this part,...

  11. Motor power control circuit for ac induction motors

    Science.gov (United States)

    Nola, F. J. (Inventor)

    1983-01-01

    A motor power control of the type which functions by controlling the power factor wherein one of the parameters of power factor current on time is determined by the on time of a triac through which current is supplied to the motor. By means of a positive feedback circuit, a wider range of control is effected.

  12. POWER QUALITY CONTROL IN A WIND POWER GENERATING SYSTEM USING SVPWM CONTROLLED UNIFIED POWER QUALITY CONDITIONER WITH GENETIC ALGORITHM

    Directory of Open Access Journals (Sweden)

    P.SARAVANAN

    2013-06-01

    Full Text Available Renewable energy resources (RES are being increasingly connected in distribution systems utilizing power electronic converters.This paper proposes a novel control design for achieving maximum benefits from the grid-interfacing inverters when installed in 3-phase 3-wire distribution systems. The main aim of the proposed system is to compensate current unbalance, load current harmonics, load reactive power demand and load neutral current. Modulation technique used is Space Vector Pulse Width Modulation (SVPWM. Simulation and experimental studies on a three phase 3 wire distribution system is used to verify the performance and real time implementation of the control design.

  13. Prediction control of active power filters

    Institute of Scientific and Technical Information of China (English)

    王莉娜; 罗安

    2003-01-01

    A prediction method to obtain harmonic reference for active power filter is presented. It is a new use ofthe adaptive predictive filter based on FIR. The delay inherent in digital controller is successfully compensated by u-sing the proposed method, and the computing load is not very large compared with the conventional method. Moreo-ver, no additional hardware is needed. Its DSP-based realization is also presented, which is characterized by time-va-riant rate sampling, quasi synchronous sampling, and synchronous operation among the line frequency, PWM gener-ating and sampling in A/D unit. Synchronous operation releases the limitation on PWM modulation ratio and guar-antees that the electrical noises resulting from the switching operation of IGBTs do not interfere with the sampledcurrent. The simulation and experimental results verify the satisfactory performance of the proposed method.

  14. Adaptive Hierarchical Control for the Muscle Strength Training of Stroke Survivors in Robot-aided Upper-limb Rehabilitation

    Directory of Open Access Journals (Sweden)

    Guozheng Xu

    2012-10-01

    Full Text Available Muscle strength training for stroke patients is of vital importance for helping survivors to progressively restore muscle strength and improve the performance of their activities in daily living (ADL. An adaptive hierarchical therapy control framework which integrates the patient’s real biomechanical state estimation with task‐performance quantitative evaluation is proposed. Firstly, a high‐level progressive resistive supervisory controller is designed to determine the resistive force base for each training session based on the patient’s online task‐performance evaluation. Then, a low‐level adaptive resistive force triggered controller is presented to further regulate the interactive resistive force corresponding to the patient’s real‐time biomechanical state ‐ characterized by the patient’s bio‐damping and bio‐stiffness in the course of one training session, so that the patient is challenged in a moderate but engaging and motivating way. Finally, a therapeutic robot system using a Barrett WAMTM compliant manipulator is set up. We recruited eighteen inpatient and outpatient stroke participants who were randomly allocated in experimental (robot‐aided and control (conventional physical therapy groups and enrolled for sixteen weeks of progressive resistance training. The preliminary results show that the proposed therapy control strategies can enhance the recovery of strength and motor control ability.

  15. Computing an operating parameter of a unified power flow controller

    Science.gov (United States)

    Wilson, David G; Robinett, III, Rush D

    2015-01-06

    A Unified Power Flow Controller described herein comprises a sensor that outputs at least one sensed condition, a processor that receives the at least one sensed condition, a memory that comprises control logic that is executable by the processor; and power electronics that comprise power storage, wherein the processor causes the power electronics to selectively cause the power storage to act as one of a power generator or a load based at least in part upon the at least one sensed condition output by the sensor and the control logic, and wherein at least one operating parameter of the power electronics is designed to facilitate maximal transmittal of electrical power generated at a variable power generation system to a grid system while meeting power constraints set forth by the electrical power grid.

  16. The chromosome axis controls meiotic events through a hierarchical assembly of HORMA domain proteins.

    Science.gov (United States)

    Kim, Yumi; Rosenberg, Scott C; Kugel, Christine L; Kostow, Nora; Rog, Ofer; Davydov, Vitaliy; Su, Tiffany Y; Dernburg, Abby F; Corbett, Kevin D

    2014-11-24

    Proteins of the HORMA domain family play central, but poorly understood, roles in chromosome organization and dynamics during meiosis. In Caenorhabditis elegans, four such proteins (HIM-3, HTP-1, HTP-2, and HTP-3) have distinct but overlapping functions. Through combined biochemical, structural, and in vivo analysis, we find that these proteins form hierarchical complexes through binding of their HORMA domains to cognate peptides within their partners' C-terminal tails, analogous to the "safety belt" binding mechanism of Mad2. These interactions are critical for recruitment of HIM-3, HTP-1, and HTP-2 to chromosome axes. HTP-3, in addition to recruiting the other HORMA domain proteins to the axis, plays an independent role in sister chromatid cohesion and double-strand break formation. Finally, we find that mammalian HORMAD1 binds a motif found both at its own C terminus and at that of HORMAD2, indicating that this mode of intermolecular association is a conserved feature of meiotic chromosome structure in eukaryotes. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. A Hybrid System of Hierarchical Planning of Behaviour Selection Networks for Mobile Robot Control

    Directory of Open Access Journals (Sweden)

    Young-Seol Lee

    2014-04-01

    Full Text Available An office delivery robot receives a large amount of sensory data and there is uncertainty in its action outcomes. The robot should not only accomplish its goals using environmental information, but also consider various exceptions simultaneously. In this paper, we propose a hybrid system using hierarchical planning of modular behaviour selection networks to generate autonomous behaviour in the office delivery robot. Behaviour selection networks, one of the well-known behaviour-based methods suitable for goal-oriented tasks, are made up of several smaller behaviour modules. Planning is attached to the construct and adjust sequences of the modules by considering the sub-goals, the priority in each task and the user feedback. This helps the robot to quickly react in dynamic situations as well as achieve global goals efficiently. The proposed system is verified with both the Webot simulator and a Khepera II robot that runs in a real office environment carrying out delivery tasks. Experimental results have shown that a robot can achieve goals and generate module sequences successfully even in unpredictable situations. Additionally, the proposed planning method reduced the elapsed time during tasks by 17.5% since it adjusts the behaviour module sequences more effectively.

  18. Controlled synthesis of hierarchical TiO2 nanoparticles on glass fibres and their photocatalytic performance.

    Science.gov (United States)

    Chen, Lin; Yang, Sudong; Mäder, Edith; Ma, Peng-Cheng

    2014-09-07

    This paper reports the synthesis of novel photocatalysts consisting of TiO2 nanoparticles and glass fibres (GF) using a two-step process. The method involves the hydrolysis of titanium tetrachloride in the presence of GF and a following hydrothermal process under alkaline conditions. Various techniques are employed to characterize the morphology, structure and crystallinity of TiO2 on the fibre surface. The results show that depending on the experiment setups, TiO2 nanoparticles exhibit spherical or flake-like morphology, forming characteristic hierarchical structures along with flexible GF. Flake-like TiO2/GF exhibits much enhanced photocatalytic activity thanks to the large surface area and the hetero-junction of anatase and TiO2-B phases observed in its structure. An interesting observation is that the alkali treatment of GF leads to the formation of porous structures on the fibre surface, facilitating the adsorption-concentration-promoted photocatalytic process. The removal ratio of the organic dye by employing TiO2/GF remains more than 80% after six cyclic runs, showing the reusability of photocatalysts in real application. The novelty of this work lies in the synergy arising from materials with unique morphologies, structures and availabilities as well as capabilities in separating photogenerated electron-hole pairs, which have not been specifically considered previously in photocatalytic semiconductors.

  19. Wind power integration into the automatic generation control of power systems with large-scale wind power

    Directory of Open Access Journals (Sweden)

    Abdul Basit

    2014-10-01

    Full Text Available Transmission system operators have an increased interest in the active participation of wind power plants (WPP in the power balance control of power systems with large wind power penetration. The emphasis in this study is on the integration of WPPs into the automatic generation control (AGC of the power system. The present paper proposes a coordinated control strategy for the AGC between combined heat and power plants (CHPs and WPPs to enhance the security and the reliability of a power system operation in the case of a large wind power penetration. The proposed strategy, described and exemplified for the future Danish power system, takes the hour-ahead regulating power plan for generation and power exchange with neighbouring power systems into account. The performance of the proposed strategy for coordinated secondary control is assessed and discussed by means of simulations for different possible future scenarios, when wind power production in the power system is high and conventional production from CHPs is at a minimum level. The investigation results of the proposed control strategy have shown that the WPPs can actively help the AGC, and reduce the real-time power imbalance in the power system, by down regulating their production when CHPs are unable to provide the required response.

  20. 基于串行及并行恢复的电力系统重构%Power System Reconstruction Based on Hierarchical and Partitioned Restoration

    Institute of Scientific and Technical Information of China (English)

    赵腾; 张焰; 张志强

    2015-01-01

    The research on system reconstruction after blackout is of great significance for fast and safe system restoration.The hierarchical and partitioned restoration concept is elaborated from a new perspective, and a new system reconstruction algorithm is proposed based on hierarchical and partitioned restoration.The algorithm uses the way of stepwise searching optimization,and takes the balance of power and the importance degree of target nodes in the system restoring process into consideration dynamically.The topology of reconstruction network is integrally optimized in the hierarchical restoring process on the basis of ensuring the flexibility of the reconstruction plan,and the partition distance sensitivity index is introduced to provide quantitative references for effective coordination between different subsystems in the partitioned restoring process.The power flow constraints of the target system in each step are checked to ensure the feasibility of the reconstruction plan.The effectiveness of this algorithm is verified by the calculation results of an IEEE 1 18-bus system and the East China power system.%研究大停电后的电力系统重构问题对于系统的快速安全恢复有着重要意义。文中在对大停电后电力系统串行及并行恢复概念进行新的阐述的基础上,提出一种基于串行和并行恢复的系统重构优化算法。该算法采用分步探索寻优方式,动态地考虑系统恢复过程中的功率平衡以及目标节点在网络中的重要程度等问题,在保证重构方案灵活性的基础上对串行恢复过程中重构网架的拓扑结构进行整体优化,引入分区距离灵敏度指标为并行恢复过程中各子系统间的有效配合提供定量参考,并对每一步得到的目标系统进行潮流校验以保证重构方案的可行性。以 IEEE 118节点系统和华东电网为例验证了算法的有效性。

  1. APHiD: Hierarchical Task Placement to Enable a Tapered Fat Tree Topology for Lower Power and Cost in HPC Networks

    Energy Technology Data Exchange (ETDEWEB)

    Michelogiannakis, George; Ibrahim, Khaled Z.; Shalf, John; Wilke, Jeremiah J.; Knight, Samuel; Kenny, Joseph P.

    2017-05-14

    The power and procurement cost of bandwidth in system-wide networks has forced a steady drop in the byte/flop ratio. This trend of computation becoming faster relative to the network is expected to hold. In this paper, we explore how cost-oriented task placement enables reducing the cost of system-wide networks by enabling high performance even on tapered topologies where more bandwidth is provisioned at lower levels. We describe APHiD, an efficient hierarchical placement algorithm that uses new techniques to improve the quality of heuristic solutions and reduces the demand on high-level, expensive bandwidth in hierarchical topologies. We apply APHiD to a tapered fat-tree, demonstrating that APHiD maintains application scalability even for severely tapered network configurations. Using simulation, we show that for tapered networks APHiD improves performance by more than 50% over random placement and even 15% in some cases over costlier, state-of-the-art placement algorithms.

  2. Morphology and Crystallinity-controlled Synthesis of Manganese Cobalt Oxide/Manganese Dioxides Hierarchical Nanostructures for High-Performance Supercapacitors

    Institute of Scientific and Technical Information of China (English)

    Fei; Li; Gang; Li; Hao; Chen; Jia; Qi; Jia; Fan; Dong; Yao; Bo; Hu; Zheng; Guo; Shang; 张育新

    2015-01-01

    We demonstrate a novel preparative strategy for the well-controlled MnCo2O4.5@MnO2 hierarchical nanostructures.Bothδ-MnO2 nanosheets andα-MnO2 nanorods can uniformly decorate the surface of MnCo2O4.5nanowires to form core-shell heterostructures.Detailed electrochemical characterization reveals that MnCo2O4.5@δ-MnO2 pattern exhibits not only high specific capacitance of 357.5 F g-1at a scan rate of 0.5 A g-1,but also good cycle stability(97%capacitance retention after 1000 cycles at a scan rate of 5 A g-1),which make it have a promising application as a supercapacitor electrode material.

  3. Hierarchical Coordinated Idea of Wind and Thermal Power Bundled Transmission System%风火联运源端系统有功优化运行分层协调思路

    Institute of Scientific and Technical Information of China (English)

    叶希; 鲁宗相; 乔颖; 闵勇; 黄强; 汪宁渤

    2014-01-01

    The reverse distribution of wind resource and electrical load center forms the regional transmission systems with multiple types of power sources and high penetration of wind power in the Northwest,North and Northeast China.Of those systems,the wind and thermal power bundled transmission system is the most typical one. Improving its generation controllability is the key issue to increase the proportion of wind power accommodation.First,based on an understanding of characteristics of the wind and thermal power bundled transmission system,an idea of building a new optimal operation layer between the generation units and dispatch center is proposed,which is responsible for the coordinated control between local scattered wind farms and thermal units to make the total generation more controllable and increase the wind power utilization rate.The control complexity of the combined multiple types of units with different characteristics,and dealing with the variability from renewable energy in such strong rigid generation systems are the main challenges to this optimal operation layer.The entire operation control schemes are described from three aspects,i.e.the wind farm clusters coordinated control mode,the hierarchical control mode over multiple spatial scales and the detailed coordinated control over multiple temporal scales.Finally,the hierarchical coordinated optimal operation system and corresponding operation performance evaluation indices are proposed.Moreover,the key technical problems of the optimal operation system are discussed from two aspects:the coordinated layer between wind and thermal power and that inside wind power clusters.%中国风资源与负荷中心逆向分布的特点客观上形成了含集群风电的多电源联运源端系统,其中最典型的是风火联运源端系统,提高其发电的控制灵活性对于促进风电消纳十分重要。针对“三北”地区风火联运源端系统特点,提出在调度中心和源端发电单

  4. Coordinated power control of unified power flow controller and its application for enhancing dynamic power system performance

    Science.gov (United States)

    Fang, Wanliang

    This thesis focuses on reporting my research study on a problem area relating to use of Unified Power Flow Controller (UPFC) for coordinating load flow in power systems so as to enhance their static and dynamic performance by having more secure and economical operation and higher dynamic stability margin. UPFC is considered as one of the most promising devices for implementing the Flexible AC Transmission System (FACTS) concept. Although development of UPFC is still on an infant stage, probing into its impact on power system operation is actively pursued and significant effort has been devoted to put it forward as a practical FACTS device and as a challenging academic research object. In order to consider UPFC as a basic power system element, it has to be involved in associated load flow computation essentially for power system control analysis and operational planning. An up front problem for design engineers is therefore pointing to a need to modify existing load flow program so as to accommodate interactions of UPFCs. A lot of research output start coming out but their computational efficiency are not high enough. In this regard, I propose two methods to perform the UPFC embedded load flow calculation to cater for two different types of application. The first one caters for analyzing direct control of load flow on transmission lines with embedded UPFCs. In this type of problem, active and reactive power of the lines, as well as the magnitude of bus voltages are priori given. The load flow solution can then be obtained and enables the UPFC parameters to be determined with a significantly improved computational efficiency. The second one works in contrary to the first one by which parameters of UPFCs are given before hand and the load flow calculation is performed for conforming a feasible operation. It can be regarded as an indirect load flow control calculation which is useful in planning stage for incorporating UPFC into existing system and/or carrying out

  5. Dynamic model of frequency control in Danish power system with large scale integration of wind power

    DEFF Research Database (Denmark)

    Basit, Abdul; Hansen, Anca Daniela; Sørensen, Poul Ejnar

    2013-01-01

    power system model with large scale of wind power is developed and a case study for an inaccurate wind power forecast is investigated. The goal of this work is to develop an adequate power system model that depicts relevant dynamic features of the power plants and compensates for load generation......This work evaluates the impact of large scale integration of wind power in future power systems when 50% of load demand can be met from wind power. The focus is on active power balance control, where the main source of power imbalance is an inaccurate wind speed forecast. In this study, a Danish...... imbalances, caused by inaccurate wind speed forecast, by an appropriate control of the active power production from power plants....

  6. Hierarchical tree-structured control network for the Antares laser facility

    Energy Technology Data Exchange (ETDEWEB)

    McGirt, F.

    1979-01-01

    The design and implementation of a distributed, computer-based control system for the Antares 100-kJ gas laser fusion facility is presented. Control system requirements and their operational interrelationships that consider both integrated system control and individual subsystem control are described. Several configurations of minicomputers are established to provide direct control of sets of microcomputers and to provide points of operator-laser interaction. Over 100 microcomputers are located very close to the laser device control points or sources of data and perform the real-time functions of the control system, such as data and control signal multiplexing, stepping motor control, and vacuum and gas system control. These microcomputers are designed to be supported as an integral part of the control network and to be software compatible with the larger minicomputers.

  7. Reinforcement learning based backstepping control of power system oscillations

    Energy Technology Data Exchange (ETDEWEB)

    Karimi, Ali; Eftekharnejad, Sara; Feliachi, Ali [Advanced Power and Electric Research Center (APERC), West Virginia University, Morgantown, WV 26506-6109 (United States)

    2009-11-15

    This paper proposes a reinforcement learning based backstepping control technique for damping oscillations in electric power systems using the generators excitation systems. Decentralized controllers are first designed using the backstepping technique. Then, reinforcement learning is used to tune the gains of these controllers to adapt to various operating conditions. Simulation results for a two area power system show that the proposed control technique provides better damping than (i) conventional power system stabilizers and (ii) backstepping fixed gain controllers. (author)

  8. Hierarchical photocatalysts.

    Science.gov (United States)

    Li, Xin; Yu, Jiaguo; Jaroniec, Mietek

    2016-05-01

    As a green and sustainable technology, semiconductor-based heterogeneous photocatalysis has received much attention in the last few decades because it has potential to solve both energy and environmental problems. To achieve efficient photocatalysts, various hierarchical semiconductors have been designed and fabricated at the micro/nanometer scale in recent years. This review presents a critical appraisal of fabrication methods, growth mechanisms and applications of advanced hierarchical photocatalysts. Especially, the different synthesis strategies such as two-step templating, in situ template-sacrificial dissolution, self-templating method, in situ template-free assembly, chemically induced self-transformation and post-synthesis treatment are highlighted. Finally, some important applications including photocatalytic degradation of pollutants, photocatalytic H2 production and photocatalytic CO2 reduction are reviewed. A thorough assessment of the progress made in photocatalysis may open new opportunities in designing highly effective hierarchical photocatalysts for advanced applications ranging from thermal catalysis, separation and purification processes to solar cells.

  9. Communications and control for electric power systems

    Science.gov (United States)

    Kirkham, H.

    1992-01-01

    A long-term strategy for the integration of new control technologies for power generation and delivery is proposed: the industry would benefit from an evolutionary approach that would adapt to its needs future technologies as well as those that it has so far not heeded. The integrated operation of the entire system, including the distribution system, was proposed as a future goal. The AbNET communication protocols are reviewed, and additions that were made in 1991 are described. In the original network, traffic was controlled by polling at the master station, located at the substation, and routed by a flooding algorithm. In a revised version, the polling and flooding are modified. The question of interfacing low-energy measurement transducers or instrument transformers is considered. There is presently little or no agreement on what the output of optical current transducers (CT's) should be. Appendices deal with the calibration of current transducers; with Delta modulation, a simple means of serially encoding the output of an OCT; and with noise shaping, a method of digital signal processing that trades off the number of bits in a digital sample for a higher number of samples.

  10. Macrofouling control in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Ekis, E.W. Jr.; Keoplin-Gall, S.M.; McCarthy, R.E.

    1991-11-01

    Macrofouling of cooling-water systems is one of the more significant and costly problems encountered in the nuclear power industry. Both marine and freshwater macroinvertebrates can be responsible for losses in plant availability because of plugged intakes and heat transfer equipment. There is a greater diversity of macrofouling organisms in marine waters than in fresh waters. Marine macrofouling organisms include barnacles, mollusks, bryozoans, and hydroids. Barnacles are crustaceans with feathery appendages, which allow them to attach to a variety of surfaces. They are a major cause of severe macrofouling because they can remain attached even after death. The major freshwater macrofouling organisms include the Asiatic Clam (Corbicula fluminea) and the newest freshwater macrofouler, the Zebra Mussel (Dreissena polymorpha). The introduction of the Zebra Mussel into the Great Lakes has created economic and ecological problems that will not easily be solved. The threat of intercontinental dispersal of the Zebra Mussel in America is serious. Research programs have been initiated around the country to develop control methods for this macrofouling problem. The various control methodologies can be classified in the following categories: biological, chemical, physical, and mechanical. Laboratory experiments were performed to evaluate the efficacy of Actibrom against mature Zebra Mussels.

  11. Solar Power Station Output Inverter Control Design

    Directory of Open Access Journals (Sweden)

    J. Bauer

    2011-04-01

    Full Text Available The photovoltaic applications spreads in these days fast, therefore they also undergo great development. Because the amount of the energy obtained from the panel depends on the surrounding conditions, as intensity of the sun exposure or the temperature of the solar array, the converter must be connected to the panel output. The Solar system equipped with inverter can supply small loads like notebooks, mobile chargers etc. in the places where the supplying network is not present. Or the system can be used as a generator and it shall deliver energy to the supply network. Each type of the application has different requirements on the converter and its control algorithm. But for all of them the one thing is common – the maximal efficiency. The paper focuses on design and simulation of the low power inverter that acts as output part of the whole converter. In the paper the design of the control algorithm of the inverter for both types of inverter application – for islanding mode and for operation on the supply grid – is discussed. Attention is also paid to the design of the output filter that should reduce negative side effects of the converter on the supply network.

  12. Adaptive decoupled power control method for inverter connected DG

    DEFF Research Database (Denmark)

    Sun, Xiaofeng; Tian, Yanjun; Chen, Zhe

    2014-01-01

    The integration of renewable energy technology is making the power distribution system more flexible, but also introducing challenges for traditional technology. With the nature of intermittent and less inertial, renewable energy-based generations need effective control methods to cooperate...... an adaptive droop control method based on online evaluation of power decouple matrix for inverter connected distributed generations in distribution system. Traditional decoupled power control is simply based on line impedance parameter, but the load characteristics also cause the power coupling, and alter...

  13. Evaluation of power control concepts using the PMAD systems test bed. [Power Management and Distribution

    Science.gov (United States)

    Beach, R. F.; Kimnach, G. L.; Jett, T. A.; Trash, L. M.

    1989-01-01

    The Lewis Research Center's Power Management and Distribution (PMAD) System testbed and its use in the evaluation of control concepts applicable to the NASA Space Station Freedom electric power system (EPS) are described. The facility was constructed to allow testing of control hardware and software in an environment functionally similar to the space station electric power system. Control hardware and software have been developed to allow operation of the testbed power system in a manner similar to a supervisory control and data acquisition (SCADA) system employed by utility power systems for control. The system hardware and software are described.

  14. Electric power systems analysis and control

    CERN Document Server

    Saccomanno, Fabio

    2003-01-01

    "Highly relevant and timely in scope, the book is essential reading for anyone associated with electric power systems, including students and teachers of power engineering courses, professionals in the industry, consultants, and researchers."--Jacket.

  15. Optimisation of a storage facility used to effect power control in the PBMR power cycle

    OpenAIRE

    Mathews, Edward A; Pelzer, Ruaan; Matimba, A

    2008-01-01

    This article presents the optimization of a gas storage facility used to effect power control in South Africa's PBMR power cycle. It was shown in the article, a multitank storage facility to affect power control in the PBMR power cyclel, that a multi tank design with heat capacitance improves storage effictiveness, which could make the system cheaper. This storage facility is known as the Inventory Control System (ICS). The focus in this article is to determine an optimum numbe...

  16. Power flow analysis for DC voltage droop controlled DC microgrids

    DEFF Research Database (Denmark)

    Li, Chendan; Chaudhary, Sanjay; Dragicevic, Tomislav

    2014-01-01

    This paper proposes a new algorithm for power flow analysis in droop controlled DC microgrids. By considering the droop control in the power flow analysis for the DC microgrid, when compared with traditional methods, more accurate analysis results can be obtained. The algorithm verification...... is carried out by comparing the calculation results with detailed time domain simulation results. With the droop parameters as variables in the power flow analysis, their effects on power sharing and secondary voltage regulation can now be analytically studied, and specialized optimization in the upper level...... control can also be made accordingly. Case studies on power sharing and secondary voltage regulation are carried out using proposed power flow analysis....

  17. Design of power control system using SMES and SVC for fusion power plant

    Science.gov (United States)

    Niiyama, K.; Yagai, T.; Tsuda, M.; Hamajima, T.

    2008-02-01

    A SMES (Superconducting Magnetic Energy Storage System) system with converter composed of self-commutated valve devices such as GTO and IGBT is available to control active and reactive power simultaneously. A SVC (Static Var Compensators) or STATCOM (Static Synchronous Compensator) is widely employed to reduce reactive power in power plants and substations. Owing to progress of power electronics technology using GTO and IGBT devices, power converters in the SMES system and the SVC can easily control power flow in few milliseconds. Moreover, since the valve devices for the SMES are equivalent to those for the SVC, the device cost must be reduced. In this paper the basic control system combined with the SMES and SVC is designed for large pulsed loads of a nuclear fusion power plant. This combined system largely expands the reactive power control region as well as the active one. The simulation results show that the combined system is effective and prospective for the nuclear fusion power plant.

  18. Modeling and control of sustainable power systems

    CERN Document Server

    Wang, Lingfeng

    2011-01-01

    The concept of the smart grid promises the world an efficient and intelligent approach of managing energy production, transportation, and consumption by incorporating intelligence, efficiency, and optimality into the power grid. Both energy providers and consumers can take advantage of the convenience, reliability, and energy savings achieved by real-time and intelligent energy management. To this end, the current power grid is experiencing drastic changes and upgrades. For instance, more significant green energy resources such as wind power and solar power are being integrated into the power

  19. Dynamic Reactive Power Control in Offshore HVDC Connected Wind Power Plants

    DEFF Research Database (Denmark)

    Sakamuri, Jayachandra N.; Cutululis, Nicolaos Antonio; Rather, Zakir Hussain;

    2016-01-01

    This paper presents a coordinated reactive power control for a HVDC connected cluster of offshore wind power plants (WPPs). The reactive power reference for the WPP cluster is estimated by an optimization algorithm aiming at minimum active power losses in the offshore AC Grid. For each optimal...

  20. Complexity, Robustness, and Multistability in Network Systems with Switching Topologies: A Hierarchical Hybrid Control Approach

    Science.gov (United States)

    2015-05-22

    Control Problem for UAV For- mations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.2. Output Feedback Adaptive...10 2.6. On the Equivalence Between Dissipativity and Optimality of Discontinuous Nonlinear Regulators for Filippov Dynamical Systems...dynamical 1 systems controlled by optimal and inverse optimal discontinuous regulators . These results were used to design protocol controllers for group

  1. A project of upgrading the operations control system of the Hungarian electric power system

    Energy Technology Data Exchange (ETDEWEB)

    Oroszki, L.; Kovacs, G.

    1998-07-01

    About 20 years ago an on-line EMS/SCADA system replaced the previously used off-line control system in the Hungarian power system. The system that has met the technological requirements of that time now became obsolete. A project started in 1995 by the Hungarian Power Companies, Ltd. (MVM Rt.), the regional utility companies and the power plant companies, with funding through a World Bank loan to cover international procurement, aims to upgrade that system into a complex, intelligent and state-of-the-art process control system. The new hierarchical system will rely on a distributed computer network structure, universally accepted hardware/software interface standards and communication protocols and use hardware platform independent software. The automatic generation control, performed from the National Dispatch Centre, will have expanded functionality, the most important single item of this will be the inclusion of automatic voltage/var control. The upgrading project includes the replacement of the substation and power plant remote terminal units and the installation of a telecommunication network to provide this telecontrol system with the necessary communications links. The supply contracts for both the master station and the remote terminal unit parts were awarded to the winners of open international bidding processes. In the project implementation MVM has the overall responsibility and works with assistance from international and Hungarian engineering firms.

  2. Testing power system controllers by real-time simulation

    DEFF Research Database (Denmark)

    Venne, Philippe; Guillaud, Xavier; Sirois, Frédéric

    2007-01-01

    In this paper, we present a number of state-of-the art methods for testing power system controllers based on the use of a real-time power system simulator. After introducing Hypersim, we list and discuss the different means of connection between the controller under tests and the power system...

  3. Hierarchical nanostructures of copper(II) phthalocyanine on electrospun TiO(2) nanofibers: controllable solvothermal-fabrication and enhanced visible photocatalytic properties.

    Science.gov (United States)

    Zhang, Mingyi; Shao, Changlu; Guo, Zengcai; Zhang, Zhenyi; Mu, Jingbo; Cao, Tieping; Liu, Yichun

    2011-02-01

    In the present work, 2,9,16,23-tetranitrophthalocyanine copper(II) (TNCuPc)/TiO(2) hierarchical nanostructures were successfully fabricated by a simple combination method of electrospinning technique and solvothermal processing. Scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), UV-vis diffuse reflectance (DR), Fourier transform infrared spectrum (FT-IR), X-ray photoelectron spectroscopy (XPS), and thermal gravimetric and differential thermal analysis (TG-DTA) were used to characterize the as-synthesized TNCuPc/TiO(2) hierarchical nanostructures. The results showed that the secondary TNCuPc nanostructures were not only successfully grown on the primary TiO(2) nanofibers substrates but also uniformly distributed without aggregation. By adjusting the solvothermal fabrication parameters, the TNCuPc nanowires or nanoflowers were facilely fabricated, and also the loading amounts of TNCuPc could be controlled on the TNCuPc/TiO(2) hierarchical nanostructural nanofibers. And, there might exist the interaction between TNCuPc and TiO(2). A possible mechanism for the formation of TNCuPc/TiO(2) hierarchical nanostructures was suggested. The photocatalytic studies revealed that the TNCuPc/TiO(2) hierarchical nanostructures exhibited enhanced photocatalytic efficiency of photodegradation of Rhodamine B (RB) compared with the pure TNCuPc or TiO(2) nanofibers under visible-light irradiation.

  4. Digital power factor control and reactive power regulation for grid-connected photovoltaic inverter

    Energy Technology Data Exchange (ETDEWEB)

    Hassaine, L. [Power Electronics Systems Group, Universidad Carlos III de Madrid, Avda. de la Universidad 30, 28911 Leganes, Madrid (Spain); Ecole Nationale Polytechnique, Hassen Badi, El Harrach, Alger (Algeria); Olias, E.; Quintero, J. [Power Electronics Systems Group, Universidad Carlos III de Madrid, Avda. de la Universidad 30, 28911 Leganes, Madrid (Spain); Haddadi, M. [Ecole Nationale Polytechnique, Hassen Badi, El Harrach, Alger (Algeria)

    2009-01-15

    The overall efficiency of photovoltaic (PV) systems connected to the grid depends on the efficiency of direct current (DC) of the solar modules to alternate current (AC) inverter conversion. The requirements for inverter connection include: maximum power point, high efficiency, control power injected into the grid, high power factor and low total harmonic distortion of the currents injected into the grid. An approach to power factor control and reactive power regulation for PV systems connected to the grid using field programmable gate array (FPGA) is proposed. According to the grid demands; both the injected active and reactive powers are controlled. In this paper, a new digital control strategy for a single-phase inverter is carried out. This control strategy is based on the phase shift between the inverter output voltage and the grid voltage, and the digital sinusoidal pulse width modulation (DSPWM) patterns, in order to control the power factor for a wide range of the inverter output current and consequently the control and the regulation of the reactive power will be achieved. The advantage of the proposed control strategy is its implementation around simple digital circuits. In this work, a simulation study of this strategy has been realized using Matlab/Simulink and PSIM. In order to validate its performance, this control has been implemented in a FPGA. Experimental tests have been carried out demonstrating the viability of this control in order to control the power factor and the injected power into the grid. (author)

  5. Advanced Electric Distribution, Switching, and Conversion Technology for Power Control

    Science.gov (United States)

    Soltis, James V.

    1998-01-01

    The Electrical Power Control Unit currently under development by Sundstrand Aerospace for use on the Fluids Combustion Facility of the International Space Station is the precursor of modular power distribution and conversion concepts for future spacecraft and aircraft applications. This unit combines modular current-limiting flexible remote power controllers and paralleled power converters into one package. Each unit includes three 1-kW, current-limiting power converter modules designed for a variable-ratio load sharing capability. The flexible remote power controllers can be used in parallel to match load requirements and can be programmed for an initial ON or OFF state on powerup. The unit contains an integral cold plate. The modularity and hybridization of the Electrical Power Control Unit sets the course for future spacecraft electrical power systems, both large and small. In such systems, the basic hybridized converter and flexible remote power controller building blocks could be configured to match power distribution and conversion capabilities to load requirements. In addition, the flexible remote power controllers could be configured in assemblies to feed multiple individual loads and could be used in parallel to meet the specific current requirements of each of those loads. Ultimately, the Electrical Power Control Unit design concept could evolve to a common switch module hybrid, or family of hybrids, for both converter and switchgear applications. By assembling hybrids of a common current rating and voltage class in parallel, researchers could readily adapt these units for multiple applications. The Electrical Power Control Unit concept has the potential to be scaled to larger and smaller ratings for both small and large spacecraft and for aircraft where high-power density, remote power controllers or power converters are required and a common replacement part is desired for multiples of a base current rating.

  6. 3级递阶舰艇作战系统控制结构%Kind of three-level hierarchical control architecture for shipborne combat system

    Institute of Scientific and Technical Information of China (English)

    吕遐东; 姚腾钢; 黄心汉

    2011-01-01

    介绍了一种舰艇作战系统3级递阶集成控制结构,该结构自上而下包括系统组织级、资源协调级和设备执行级,形成了“信号-数据-知识”的3层信息递阶关系和“伺服-协调-组织”的3层控制递阶关系;同时融合了基于领域专家设计经验和指挥员作战知识的学习控制,结合“人在回路”设计实现人机智能的统一.针对作战系统分级递阶控制的信息度量、资源调度的离散事件建模、基于知识/规则的系统控制等基础理论问题进行了分析探讨.%A kind of three-level hierarchical control architecture for shipborne combat system Was introduced. The architecture consisted of three control levels from top to bottom including system-organizing layer, resource-coordinating layer and device-executing layer. It induced "signal-data-knowledge" hierarchical information model and "servo-coordinate-organize" hierarchical control model. The architecture also fused learning control based on expert experience and commander knowledge to integrate with human and machine intelligence by "man-in-loop" design. Considering hierarchical information evaluation, discrete event modeling for resource scheduling and knowledge-based system control, these theoretical fundamental issues had been discussed to combat system's hierarchical control application.

  7. "The next Big Five Inventory (BFI-2): Developing and assessing a hierarchical model with 15 facets to enhance bandwidth, fidelity, and predictive power": Correction to Soto and John (2016).

    Science.gov (United States)

    2017-07-01

    . Study 3 used data from 2 validation samples to evaluate the BFI-2's measurement properties and substantive relations with self-reported and peer-reported criteria. The results of these studies indicate that the BFI-2 is a reliable and valid personality measure, and an important advance over the original BFI. Specifically, the BFI-2 introduces a robust hierarchical structure, controls for individual differences in acquiescent responding, and provides greater bandwidth, fidelity, and predictive power than the original BFI, while still retaining the original measure's conceptual focus, brevity, and ease of understanding. The BFI-2 therefore offers valuable new opportunities for research examining the structure, assessment, development, and life outcomes of personality traits. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  8. Joint Transmit Beamforming and Power Control for CDMA System

    Institute of Scientific and Technical Information of China (English)

    LI Ji-long; CHEN Yu; LI Chun-yuan; ZHANG Ping

    2005-01-01

    Downlink transmit beamforming is a promising technique to reduce interference,and power control is a technique to adjust transmission power to satisfy the link quality.Joint transmission power control and beamforming are proposed to minimize total transmission power.The joint optimization problem is solved by receiver beamforming and power control in virtual uplink.SIR based power control is performed to adjust the power allocation,and transmit beamforming weight vectors are determined by Minimum Variance Distortionless Response(MVDR)criterion.The multipath combining weight vectors are determined by maximum ratio combining criterion.Simulation results show the joint optimization scheme decreases the transmission power,and system performance is enhanced.

  9. Power Control in Multi-cluster Mobile Ad hoc Networks

    Institute of Scientific and Technical Information of China (English)

    JINYanliang; YANGYuhang

    2003-01-01

    Power control gives us many advantages including power saving, lower interference, and efficient channel utilization. We proposed two clustering algorithms with power control for multl-cluster mobile ad hoc networks in this paper. They improve the network throughput and the network stability as compared to other ad hoc networks in which all mobile nodes use the same transmission power. Furthermore, they help in reducing the system power consumption. We compared the performances of the two approaches. Simulation results show that the DCAP (Distributed clustering algorithm with power control) would achieve a better throughput performance and lower power consumption than the CCAP (Centralized clustering algorithm with power control), but it is complicated and liable to be affected by node velocity.

  10. Resistojet control and power for high frequency ac buses

    Science.gov (United States)

    Gruber, Robert P.

    1987-01-01

    Resistojets are operational on many geosynchronous communication satellites which all use dc power buses. Multipropellant resistojets were selected for the Initial Operating Capability (IOC) Space Station which will supply 208 V, 20 kHz power. This paper discusses resistojet heater temperature controllers and passive power regulation methods for ac power systems. A simple passive power regulation method suitable for use with regulated sinusoidal or square wave power was designed and tested using the Space Station multipropellant resistojet. The breadboard delivered 20 kHz power to the resistojet heater. Cold start surge current limiting, a power efficiency of 95 percent, and power regulation of better than 2 percent were demonstrated with a two component, 500 W breadboard power controller having a mass of 0.6 kg.

  11. How hierarchical is language use?

    Science.gov (United States)

    Frank, Stefan L.; Bod, Rens; Christiansen, Morten H.

    2012-01-01

    It is generally assumed that hierarchical phrase structure plays a central role in human language. However, considerations of simplicity and evolutionary continuity suggest that hierarchical structure should not be invoked too hastily. Indeed, recent neurophysiological, behavioural and computational studies show that sequential sentence structure has considerable explanatory power and that hierarchical processing is often not involved. In this paper, we review evidence from the recent literature supporting the hypothesis that sequential structure may be fundamental to the comprehension, production and acquisition of human language. Moreover, we provide a preliminary sketch outlining a non-hierarchical model of language use and discuss its implications and testable predictions. If linguistic phenomena can be explained by sequential rather than hierarchical structure, this will have considerable impact in a wide range of fields, such as linguistics, ethology, cognitive neuroscience, psychology and computer science. PMID:22977157

  12. How hierarchical is language use?

    Science.gov (United States)

    Frank, Stefan L; Bod, Rens; Christiansen, Morten H

    2012-11-22

    It is generally assumed that hierarchical phrase structure plays a central role in human language. However, considerations of simplicity and evolutionary continuity suggest that hierarchical structure should not be invoked too hastily. Indeed, recent neurophysiological, behavioural and computational studies show that sequential sentence structure has considerable explanatory power and that hierarchical processing is often not involved. In this paper, we review evidence from the recent literature supporting the hypothesis that sequential structure may be fundamental to the comprehension, production and acquisition of human language. Moreover, we provide a preliminary sketch outlining a non-hierarchical model of language use and discuss its implications and testable predictions. If linguistic phenomena can be explained by sequential rather than hierarchical structure, this will have considerable impact in a wide range of fields, such as linguistics, ethology, cognitive neuroscience, psychology and computer science.

  13. Integrated power electronic converters and digital control

    CERN Document Server

    Emadi, Ali; Nie, Zhong

    2009-01-01

    Non-isolated DC-DC ConvertersBuck ConverterBoost ConverterBuck-Boost ConverterIsolated DC-DC ConvertersFlyback ConverterForward ConverterPush-Pull ConverterFull-Bridge ConverterHalf-Bridge ConverterPower Factor CorrectionConcept of PFCGeneral Classification of PFC CircuitsHigh Switching Frequency Topologies for PFCApplication of PFC in Advanced Motor DrivesIntegrated Switched-Mode Power ConvertersSwitched-Mode Power SuppliesThe Concept of Integrated ConverterDefinition of Integrated Switched-Mode Power Supplies (ISMPS)Boost-Type Integrated TopologiesGeneral Structure of Boost-Type Integrated T

  14. Control of Power Converters in AC Microgrids

    DEFF Research Database (Denmark)

    Rocabert, Joan; Luna, Alvaro; Blaabjerg, Frede

    2012-01-01

    The enabling of ac microgrids in distribution networks allows delivering distributed power and providing grid support services during regular operation of the grid, as well as powering isolated islands in case of faults and contingencies, thus increasing the performance and reliability of the ele......The enabling of ac microgrids in distribution networks allows delivering distributed power and providing grid support services during regular operation of the grid, as well as powering isolated islands in case of faults and contingencies, thus increasing the performance and reliability...

  15. Analysis of Interline Power Flow Controller (IPFC Location in Power Transmission Systems

    Directory of Open Access Journals (Sweden)

    Amir Kahyaei

    2011-07-01

    Full Text Available The Interline Power Flow Controller (IPFC is one of the latest generation Flexible AC Transmission Systems (FACTS controller used to control power flows of multiple transmission lines. The aim of this paper is investigation of the effect of location of IPFC on profile of voltage and real and reactive power flow in transmission lines in power system. This model is incorporated in Newton- Raphson (NR power flow algorithm to study the power flow control in transmission lines in which IPFC is placed. A program in MATLAB/SIMULINK has been written in order to extend conventional NR algorithm based on this model. Numerical results are carried out on a standard power system. The results without and with IPFC for various locations are compared in terms of voltages, active and reactive power flows to demonstrate the performance of the IPFC model.

  16. SIMULATION STUDY OF GENERALIZED PREDICTIVE CONTROL FOR TURBINE POWER

    Institute of Scientific and Technical Information of China (English)

    Shi Xiaoping; Li Dongmei

    2004-01-01

    A GPC (generalized predictive control) law is developed to control the power of a turbine, after transforming the nonlinear mathematical model of the power regulation system into a CARIMA(controlled auto-regressive integrated moving average) form. The effect of the new control law is compared with a traditional PID (proportional, integral and differential) control law by numerical simulation. The simulation results verify the effectiveness, the correctness and the advantage of the new control scheme.

  17. A novel decentralized hierarchical access control scheme for the medical scenario

    DEFF Research Database (Denmark)

    Eskeland, Sigurd; Prasad, Neeli R.

    2006-01-01

    to be the property of the corresponding patient, it is justified that patients should have the opportunity to exert control over their own data. In this paper, we propose a cryptographic access control scheme allowing patients to grant medical teams authorizations to access their medical data. Moreover...

  18. Sliding mode control of switching power converters techniques and implementation

    CERN Document Server

    Tan, Siew-Chong; Tse, Chi-Kong

    2011-01-01

    Sliding Mode Control of Switching Power Converters: Techniques and Implementation is perhaps the first in-depth account of how sliding mode controllers can be practically engineered to optimize control of power converters. A complete understanding of this process is timely and necessary, as the electronics industry moves toward the use of renewable energy sources and widely varying loads that can be adequately supported only by power converters using nonlinear controllers.Of the various advanced control methods used to handle the complex requirements of power conversion systems, sliding mode c

  19. Power system stabilizers based on modern control techniques

    Energy Technology Data Exchange (ETDEWEB)

    Malik, O.P.; Chen, G.P.; Zhang, Y.; El-Metwally, K. [Calgary Univ., AB (Canada). Dept. of Electrical and Computer Engineering

    1994-12-31

    Developments in digital technology have made it feasible to develop and implement improved controllers based on sophisticated control techniques. Power system stabilizers based on adaptive control, fuzzy logic and artificial networks are being developed. Each of these control techniques possesses unique features and strengths. In this paper, the relative performance of power systems stabilizers based on adaptive control, fuzzy logic and neural network, both in simulation studies and real time tests on a physical model of a power system, is presented and compared to that of a fixed parameter conventional power system stabilizer. (author) 16 refs., 45 figs., 3 tabs.

  20. A scheme to design power controller in wireless network systems

    Science.gov (United States)

    Kong, Shulan; Zhang, Huanshui; Zhang, Zhaosheng

    2007-02-01

    In this Letter, power control problem is firstly studied at an angle of LQG measurement-feedback control problem. A stochastic uplink power control problem is considered for CDMA systems. An effective distributed algorithm is proposed based on stochastic linear quadratic optimal control theory assuming SIR measurements contain white noise. The presented scheme minimizes the sum of the power and the error of SIR. A measurement-feedback power controller is designed by constructing an optimization problem of a stochastic linear quadratic type in Krein space and solving the Kalman filter problem for the systems.

  1. A scheme to design power controller in wireless network systems

    Energy Technology Data Exchange (ETDEWEB)

    Kong Shulan [School of Mathematics Science, Qufu Normal University, Qufu 273165, Shandong (China)]. E-mail: shulankong@sina.com; Zhang Huanshui [School of Control Science and Control Engineering, Shandong University, Jinnan 250061, Shandong (China); Zhang Zhaosheng [School of Mathematics Science, Qufu Normal University, Qufu 273165, Shandong (China)

    2007-02-05

    In this Letter, power control problem is firstly studied at an angle of LQG measurement-feedback control problem. A stochastic uplink power control problem is considered for CDMA systems. An effective distributed algorithm is proposed based on stochastic linear quadratic optimal control theory assuming SIR measurements contain white noise. The presented scheme minimizes the sum of the power and the error of SIR. A measurement-feedback power controller is designed by constructing an optimization problem of a stochastic linear quadratic type in Krein space and solving the Kalman filter problem for the systems.

  2. Power electronic converters PWM strategies and current control techniques

    CERN Document Server

    Monmasson, Eric

    2013-01-01

    A voltage converter changes the voltage of an electrical power source and is usually combined with other components to create a power supply. This title is devoted to the control of static converters, which deals with pulse-width modulation (PWM) techniques, and also discusses methods for current control. Various application cases are treated. The book is ideal for professionals in power engineering, power electronics, and electric drives industries, as well as practicing engineers, university professors, postdoctoral fellows, and graduate students.

  3. Optimizing data access for wind farm control over hierarchical communication networks

    DEFF Research Database (Denmark)

    Madsen, Jacob Theilgaard; Findrik, Mislav; Madsen, Tatiana Kozlova

    2016-01-01

    and communication networks on the controller performance. We start by investigating the effects of a communication network that introduces delays in the information access for the central controller. The control performance as measured by accumulated fatigue is shown to be significantly impacted by communication....... This information quality metric is called mismatch probability, mmPr, and is used to express quantitatively the information accuracy in a given scenario. Lastly measurements of different communication technologies have been performed in order to carry out the analysis in a practically relevant scenario......In this paper we investigate a centralized wind farm controller which runs periodically. The controller attempts to reduce the damage a wind turbine sustains during operation by estimating fatigue based on the wind turbine state. The investigation focuses on the impact of information access...

  4. Software-Based Wireless Power Transfer Platform for Various Power Control Experiments

    OpenAIRE

    Sun-Han Hwang; Chung G. Kang; Yong-Ho Son; Byung-Jun Jang

    2015-01-01

    In this paper, we present the design and evaluation of a software-based wireless power transfer platform that enables the development of a prototype involving various open- and closed-loop power control functions. Our platform is based on a loosely coupled planar wireless power transfer circuit that uses a class-E power amplifier. In conjunction with this circuit, we implement flexible control functions using a National Instruments Data Acquisition (NI DAQ) board and algorithms in the MATLAB/...

  5. Optimal Power Control in Wireless Powered Sensor Networks: A Dynamic Game-Based Approach

    Science.gov (United States)

    Xu, Haitao; Guo, Chao; Zhang, Long

    2017-01-01

    In wireless powered sensor networks (WPSN), it is essential to research uplink transmit power control in order to achieve throughput performance balancing and energy scheduling. Each sensor should have an optimal transmit power level for revenue maximization. In this paper, we discuss a dynamic game-based algorithm for optimal power control in WPSN. The main idea is to use the non-cooperative differential game to control the uplink transmit power of wireless sensors in WPSN, to extend their working hours and to meet QoS (Quality of Services) requirements. Subsequently, the Nash equilibrium solutions are obtained through Bellman dynamic programming. At the same time, an uplink power control algorithm is proposed in a distributed manner. Through numerical simulations, we demonstrate that our algorithm can obtain optimal power control and reach convergence for an infinite horizon. PMID:28282945

  6. Remarks on Hierarchic Control for a Linearized Micropolar Fluids System in Moving Domains

    Energy Technology Data Exchange (ETDEWEB)

    Jesus, Isaías Pereira de, E-mail: isaias@ufpi.edu.br [Universidade Federal do Piauí, Dpto. Matemática (Brazil)

    2015-12-15

    We study a Stackelberg strategy subject to the evolutionary linearized micropolar fluids equations in domains with moving boundaries, considering a Nash multi-objective equilibrium (non necessarily cooperative) for the “follower players” (as is called in the economy field) and an optimal problem for the leader player with approximate controllability objective. We will obtain the following main results: the existence and uniqueness of Nash equilibrium and its characterization, the approximate controllability of the linearized micropolar system with respect to the leader control and the existence and uniqueness of the Stackelberg–Nash problem, where the optimality system for the leader is given.

  7. Wind Farm Coordinated Control for Power Optimization

    Institute of Scientific and Technical Information of China (English)

    SHU Jin; HAO Zhiguo; ZHANG Baohui; BO Zhiqian

    2011-01-01

    The total wind energy capture would decrease with the aerodynamic interaction among turbines known as wake effect, and the conventional maximum power point track (MPPT) schemes for individual wind turbine generator (WTG) can not maximize the total farm power.

  8. Power flow control of intertied ac microgrids

    DEFF Research Database (Denmark)

    Nutkani, Inam Ullah; Loh, Poh Chiang; Blaabjerg, Frede

    2013-01-01

    of interlinking power converters. Active and reactive power flows of these converters should preferably be managed autonomously without demanding for fast communication links. A scheme that can fulfill the objectives is now proposed, which upon realised, will result in more robustly integrated microgrids...

  9. Power system small signal stability analysis and control

    CERN Document Server

    Mondal, Debasish; Sengupta, Aparajita

    2014-01-01

    Power System Small Signal Stability Analysis and Control presents a detailed analysis of the problem of severe outages due to the sustained growth of small signal oscillations in modern interconnected power systems. The ever-expanding nature of power systems and the rapid upgrade to smart grid technologies call for the implementation of robust and optimal controls. Power systems that are forced to operate close to their stability limit have resulted in the use of control devices by utility companies to improve the performance of the transmission system against commonly occurring power system

  10. Variable structure control for maximum wind power extraction

    Energy Technology Data Exchange (ETDEWEB)

    Barambones, O.; Gonzalez de Durana, J.M.; Alcorta, P. [Univ. of the Basque Country, Vitoria (Spain)

    2009-07-01

    The future development of wind power technology will affect the level of impact that wind power will have on the power system. Very large wind farms can pose complex technical challenges while also paving the way for other new technologies that will help with electric grid integration. Increasingly complicated power electronic and computerized control schemes will lead to significant improvements and full controllability of available wind power. Reactive power compensation is an important issue in the control of distribution and transmission systems as it increases feeder system losses, reduces system power factor, and can cause large-amplitude variations in load-side voltage. Moreover, rapid changes in the reactive power consumption of large load centers can cause voltage amplitude oscillations, leading to a change in the electric system real power demand resulting in power oscillation. This paper described a sliding mode vector control for a double fed induction generator (DFIG) drive, used in variable speed wind power generation. The study proposed a new variable structure control which has an integral sliding surface to relax the requirement of the acceleration signal, commonly used in conventional sliding mode speed control techniques. The paper discussed the system modelling, DFIG control scheme, and simulation results. A test of the proposed method based on a two-bladed horizontal axis wind turbine was conducted using the Matlab/Simulink software. In this test, several operating conditions were simulated and the study concluded that satisfactory results were obtained. 14 refs., 5 figs.

  11. On the hierarchical optimal control of a chain of distributed systems

    OpenAIRE

    Befekadu, Getachew K.; Pasiliao, Eduardo L.

    2015-01-01

    In this paper, we consider a chain of distributed systems governed by a degenerate parabolic equation, which satisfies a weak H\\"{o}rmander type condition, with a control distributed over an open subdomain. In particular, we consider two objectives that we would like to accomplish. The first one being of a controllability type that consists of guaranteeing the terminal state to reach a target set starting from an initial condition; while the second one is keeping the state trajectory of the o...

  12. Power Admission Control with Predictive Thermal Management in Smart Buildings

    DEFF Research Database (Denmark)

    Yao, Jianguo; Costanzo, Giuseppe Tommaso; Zhu, Guchuan

    2015-01-01

    This paper presents a control scheme for thermal management in smart buildings based on predictive power admission control. This approach combines model predictive control with budget-schedulability analysis in order to reduce peak power consumption as well as ensure thermal comfort. First...

  13. 14 CFR 29.1142 - Auxiliary power unit controls.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Auxiliary power unit controls. 29.1142... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Powerplant Controls and Accessories § 29.1142 Auxiliary power unit controls. Means must be provided on the flight deck for...

  14. 14 CFR 25.1142 - Auxiliary power unit controls.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Auxiliary power unit controls. 25.1142... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Powerplant Controls and Accessories § 25.1142 Auxiliary power unit controls. Means must be provided on the flight deck for...

  15. Authority, Power, and the Legitimation of Social Control.

    Science.gov (United States)

    Mitchell, Douglas E.; Spady, William G.

    1983-01-01

    To clarify "power" and "authority," the authors review the concepts' history, examine contemporary concepts of social control, identify four authority modes (based on social relations and controls), derive four power resources from these modes, discuss persuasion and exchange as social control mechanisms, and demarcate…

  16. The effect of unified power flow controller location in power systems

    Energy Technology Data Exchange (ETDEWEB)

    Tumay, M. [Cukurova University, Baliai-Adana (Turkey). Department of Electrical and Electronic Engineering; Vural, A.M. [Gaziantep University (Turkey). Department of Electrical and Electronic Engineering; Lo, K.L. [University of Strathclyde, Glasgow (United Kingdom). Department of Electrical and Electronic Engineering

    2004-09-01

    The Unified Power Flow Controller (UPFC) is a device that is capable of providing control of voltage magnitude, active and reactive power flows. This paper represents the effect of UPFC location in steady-state analysis and to demonstrate the capabilities of UPFC in controlling active and reactive power flow within any electrical network. In this paper, a complete power injection model of UPFC including both the series injection branch and the shunt exciting branch is derived in rectangular form. An injected power model method is used to represent UPFC in load flow program. Finally, different types of simulation tasks are carried out based on IEEE 30-bus test system. (author)

  17. Synchronously Driven Power Converter Controller Solution for MedAustron

    CERN Document Server

    Šepetavc, Luka; Tavčar, Rok; Moser, Roland; Gutleber, Johannes

    2011-01-01

    MedAustron is an ion beam cancer therapy and research centre currently under construction in Wiener Neustadt, Austria. This facility features a synchrotron particle accelerator for light ions. Cosylab is closely working together with MedAustron on the development of a power converter controller (PCC) for the 260 deployed power converters – power supplies. Power converters deliver power to magnets used for focusing and steering particle beams. We have designed and developed software and hardware which allows integration of different types of power converters into MedAustron's control system (MACS). PCC's role is to synchronously control and monitor connected power converters. Custom real-time fibre optics link and modular front end devices have been designed for this purpose. Modular front end devices make it possible to interface with almost any type of power converter – with or without built in regulation logic. We implemented realtime mechanisms and a dedicated real-time fibre link to ...

  18. Palm Power Free-Piston Stirling Engine Control Electronics

    Science.gov (United States)

    Keiter, Douglas E.; Holliday, Ezekiel

    2007-01-01

    A prototype 35We, JP-8 fueled, soldier-wearable power system for the DARPA Palm Power program has been developed and tested by Sunpower. A hermetically-sealed 42We Sunpower Free-Piston Stirling Engine (FPSE) with integral linear alternator is the prime mover for this system. To maximize system efficiency over a broad range of output power, a non-dissipative, highly efficient electronic control system which modulates engine output power by varying piston stroke and converts the AC output voltage of the FPSE into 28Vdc for the Palm Power end user, has been designed and demonstrated as an integral component of the Palm Power system. This paper reviews the current status and progress made in developing the control electronics for the Palm Power system, in addition to describing the operation and demonstrated performance of the engine controller in the context of the current JP-8 fueled Palm Power system.

  19. ENVIRONMENTAL ASPECTS OF GRID CONNECTED POWER ELECTRONIC CONVERTERS CONTROL

    Directory of Open Access Journals (Sweden)

    Tomasz Chmielewski

    2017-03-01

    Full Text Available This paper presents an unconventional view on power electronic converters control as an important factor in environmental protection. Two distinct features that are provided by the control system, namely harmonics elimination and Fault Ride-Through are addressed herein. The paper provides the discussion on how well designed and robust power converter control can influence the environment in a positive way. One of the shortcomings of power converters is emission of current harmonics which results in supply voltage distortion. The appropriate control minimizes the harmonics content which leads to energy losses reduction, especially in power transformers cores. Fault ride-through is an ability of power converter to remain connected and operating in a grid where the fault occurred. It is of paramount importance for integration of large power renewable energy sources. Shutting down e.g. large wind farm would result in engaging the conventional power plants to fill in the energy production gap.

  20. PULSE MODULATION POWER AMPLIFIER WITH ENHANCED CASCADE CONTROL METHOD

    DEFF Research Database (Denmark)

    1998-01-01

    A digital switching power amplifier with Multivariable Enhanced Cascade Controlled (MECC) includes a modulator, a switching power stage and a low pass filter. In the first preferred embodiment an enhanced cascade control structure local to the switching power stage is added, characterised by havi...... and feedback path A to determine stable self-oscillating conditions. An implemented 250W example MECC digital power amplifier has proven superior performance in terms of audio performance (0.005 % distortion, 115 dB dynamic range) and efficiency (92 %).......A digital switching power amplifier with Multivariable Enhanced Cascade Controlled (MECC) includes a modulator, a switching power stage and a low pass filter. In the first preferred embodiment an enhanced cascade control structure local to the switching power stage is added, characterised by having...

  1. Reactive power control methods for improved reliability of wind power inverters under wind speed variations

    DEFF Research Database (Denmark)

    Ma, Ke; Liserre, Marco; Blaabjerg, Frede

    2012-01-01

    The thermal cycling of power switching devices may lead to failures that compromise the reliability of power converters. Wind Turbine Systems (WTS) are especially subject to severe thermal cycling which may be caused by the wind speed variations or power grid faults. This paper proposes a control...... in the most stressed devices. The possible model-based control system for the proposed method is demonstrated, designed and simulated based on the Three-level Neutral-Point- Clamped (3L-NPC) grid-connected converters. It is concluded that with the proposed reactive power control method, the junction...... method to relieve the thermal cycling of power switching devices under severe wind speed variations, by circulating reactive power among the parallel power converters in a WTS or among the WTS's in a wind park. The amount of reactive power is adjusted to limit the junction temperature fluctuation...

  2. Design of power controller in CDMA system with power and SIR error minimization

    Institute of Scientific and Technical Information of China (English)

    Shulan KONG; Huanshui ZHANG; Zhaosheng ZHANG; Hongxia WANG

    2007-01-01

    In this paper, an uplink power control problem is considered for code division multiple access (CDMA) systems. A distributed algorithm is proposed based on linear quadratic optimal control theory. The proposed scheme minimizes the sum of the power and the error of signal-to-interference ratio (SIR). A power controller is designed by constructing an optimization problem of a stochastic linear quadratic type in Krein space and solving a Kalman filter problem.

  3. Investigation of axial power gradients near a control rod tip

    Energy Technology Data Exchange (ETDEWEB)

    Loberg, John, E-mail: John.Loberg@fysast.uu.se [Uppsala University, Department of Physics and Astronomy, Division of Applied Nuclear Physics, Box 525, SE-75120 Uppsala (Sweden); Osterlund, Michael, E-mail: Michael.Osterlund@fysast.uu.se [Uppsala University, Department of Physics and Astronomy, Division of Applied Nuclear Physics, Box 525, SE-75120 Uppsala (Sweden); Bejmer, Klaes-Hakan, E-mail: Klaes-Hakan.Bejmer@vattenfall.com [Vattenfall Nuclear Fuel AB, Jaemtlandsgatan 99, 162 60 Vaellingby, Stockholm (Sweden); Blomgren, Jan, E-mail: Jan.Blomgren@vattenfall.com [Vattenfall Nuclear Fuel AB, Jaemtlandsgatan 99, 162 60 Vaellingby, Stockholm (Sweden); Kierkegaard, Jesper, E-mail: Jesper.Kierkegaar@vattenfall.com [Vattenfall Nuclear Fuel AB, Jaemtlandsgatan 99, 162 60 Vaellingby, Stockholm (Sweden)

    2011-07-15

    Highlights: > Pin power gradients near BWR control rod tips have been investigated. > A control rod tip is modeled in MCNP and compared to simplified 2D/3D geometry. > Small nodes increases pin power gradients; standard nodes underestimates gradients. > The MCNP results are validated against axial gamma scan of a controlled fuel pin. - Abstract: Control rod withdrawal in BWRs induces large power steps in the adjacent fuel assemblies. This paper investigates how well a 2D/3D method, e.g., CASMO5/SIMULATE5 computes axial pin power gradients adjacent to an asymmetrical control-rod tip in a BWR. The ability to predict pin power gradients accurately is important for safety considerations whereas large powers steps induced by control rod withdrawal can cause Pellet Cladding Interaction. The computation of axial pin power gradients axially around a control rod tip is a challenging task for any nodal code. On top of that, asymmetrical control rod handles are present in some BWR designs. The lattice code CASMO requires diagonal symmetry of all control rod parts. This introduces an error in computed pin power gradients that has been evaluated by Monte Carlo calculations. The results show that CASMO5/SIMULATE5, despite the asymmetrical control rod handle, is able to predict the axial pin power gradient within 1%/cm for axial nodal sizes of 15-3.68 cm. However, a nodal size of 3.68 cm still causes underestimations of pin power gradients compared with 1 cm nodes. Furthermore, if conventional node sizes are used, {approx}15 cm, pin power gradients can be underestimated by over 50% compared with 1 cm nodes. The detailed axial pin power profiles from MCNP are corroborated by measured gamma scan data on fuel rods irradiated adjacent to control rods.

  4. Strategy Implementation through Hierarchical Couplings in a Management Control Package : An Explorative Case Study

    NARCIS (Netherlands)

    van der Kolk, Berend; Schokker, Tom

    2016-01-01

    We examine how couplings of management control (MC) elements help to implement an organization’s strategy. Despite prior research stating that couplings between MC elements form fruitful soil for further research, empirical studies in this area are still scarce. We draw on coupling theory to explore

  5. PMBLDC motor drive with power factor correction controller

    DEFF Research Database (Denmark)

    George, G.J.; Ramachandran, Rakesh; Arun, N.

    2012-01-01

    This paper presents a boost converter configuration, control scheme and design of single phase power factor controller for permanent magnet brushless DC motor (PMBLDCM) drive. PMBLDC motors are the latest choice of researchers, due to the high efficiency, silent operation, compact size, high...... reliability, and low maintenance requirements. The proposed Power Factor Controller topology improves power quality by improving performance of PMBLDCM drive, such as reduction of AC main current harmonics, near unity power factor. PFC converter forces the drive to draw sinusoidal supply current in phase...... with supply voltage. It uses a boost converter to obtain unity power factor with improved performance. The system includes a speed controller for PMBLDC drive and a voltage controller for boost converter.. The voltage or speed controllers can be realized using proportional integral (PI) controller...

  6. Power factor correction, controlling voltage distortion

    Directory of Open Access Journals (Sweden)

    A. Ceclan

    2008-05-01

    Full Text Available This paper presents, an approach fordetermining optimal sizes of single-tuned passiveharmonic filters among existent capacitor busses ina power system. The proposed method uses EdsaHarmonics Analysis and the obtained results arepresented in detail.

  7. Power flow model/calculation for power systems with multiple FACTS controllers

    Energy Technology Data Exchange (ETDEWEB)

    Radman, Ghadir; Raje, Reshma S. [Center for Energy Systems Research, Tennessee Technological University, P.O. Box 5004, Cookeville, Tennessee-38505 (United States)

    2007-10-15

    This paper presents a new procedure for steady state power flow calculation of power systems with multiple flexible AC transmission system (FACTS) controllers. The focus of this paper is to show how the conventional power flow calculation method can systematically be modified to include multiple FACTS controllers. Newton-Raphson method of iterative solution is used for power flow equations in polar coordinate. The impacts of FACTS controllers on power flow is accommodated by adding new entries and modifying some existing entries in the linearized Jacobian equation of the same system with no FACTS controllers. Three major FACTS controllers (STATic synchronous COMpensator (STATCOM), static synchronous series compensator (SSSC), and unified power flow controller (UPFC)) are studied in this paper. STATCOM is modeled in voltage control mode. SSSC controls the active power of the link to which it is connected. The UPFC controls the active and the reactive power flow of the link while maintaining a constant voltage at one of the buses. The modeling approach presented in this paper is tested on the 9-bus western system coordinating council (WSCC) power system and implemented using MATLAB software package. The numerical results show the robust convergence of the presented procedure. (author)

  8. Power system security enhancement with unified power flow controller under multi-event contingency conditions

    National Research Council Canada - National Science Library

    S. Ravindra; Chintalapudi V. Suresh; S. Sivanagaraju; V.C. Veera Reddy

    2017-01-01

    .... An improved teaching learning based optimization (ITLBO) algorithm has been presented. To enhance the system security under contingency conditions in the presence of unified power flow controller (UPFC...

  9. An effective and secure key-management scheme for hierarchical access control in E-medicine system.

    Science.gov (United States)

    Odelu, Vanga; Das, Ashok Kumar; Goswami, Adrijit

    2013-04-01

    Recently several hierarchical access control schemes are proposed in the literature to provide security of e-medicine systems. However, most of them are either insecure against 'man-in-the-middle attack' or they require high storage and computational overheads. Wu and Chen proposed a key management method to solve dynamic access control problems in a user hierarchy based on hybrid cryptosystem. Though their scheme improves computational efficiency over Nikooghadam et al.'s approach, it suffers from large storage space for public parameters in public domain and computational inefficiency due to costly elliptic curve point multiplication. Recently, Nikooghadam and Zakerolhosseini showed that Wu-Chen's scheme is vulnerable to man-in-the-middle attack. In order to remedy this security weakness in Wu-Chen's scheme, they proposed a secure scheme which is again based on ECC (elliptic curve cryptography) and efficient one-way hash function. However, their scheme incurs huge computational cost for providing verification of public information in the public domain as their scheme uses ECC digital signature which is costly when compared to symmetric-key cryptosystem. In this paper, we propose an effective access control scheme in user hierarchy which is only based on symmetric-key cryptosystem and efficient one-way hash function. We show that our scheme reduces significantly the storage space for both public and private domains, and computational complexity when compared to Wu-Chen's scheme, Nikooghadam-Zakerolhosseini's scheme, and other related schemes. Through the informal and formal security analysis, we further show that our scheme is secure against different attacks and also man-in-the-middle attack. Moreover, dynamic access control problems in our scheme are also solved efficiently compared to other related schemes, making our scheme is much suitable for practical applications of e-medicine systems.

  10. Adaptive Neural Network Algorithm for Power Control in Nuclear Power Plants

    Science.gov (United States)

    Masri Husam Fayiz, Al

    2017-01-01

    The aim of this paper is to design, test and evaluate a prototype of an adaptive neural network algorithm for the power controlling system of a nuclear power plant. The task of power control in nuclear reactors is one of the fundamental tasks in this field. Therefore, researches are constantly conducted to ameliorate the power reactor control process. Currently, in the Department of Automation in the National Research Nuclear University (NRNU) MEPhI, numerous studies are utilizing various methodologies of artificial intelligence (expert systems, neural networks, fuzzy systems and genetic algorithms) to enhance the performance, safety, efficiency and reliability of nuclear power plants. In particular, a study of an adaptive artificial intelligent power regulator in the control systems of nuclear power reactors is being undertaken to enhance performance and to minimize the output error of the Automatic Power Controller (APC) on the grounds of a multifunctional computer analyzer (simulator) of the Water-Water Energetic Reactor known as Vodo-Vodyanoi Energetichesky Reaktor (VVER) in Russian. In this paper, a block diagram of an adaptive reactor power controller was built on the basis of an intelligent control algorithm. When implementing intelligent neural network principles, it is possible to improve the quality and dynamic of any control system in accordance with the principles of adaptive control. It is common knowledge that an adaptive control system permits adjusting the controller’s parameters according to the transitions in the characteristics of the control object or external disturbances. In this project, it is demonstrated that the propitious options for an automatic power controller in nuclear power plants is a control system constructed on intelligent neural network algorithms.

  11. Power effects on cognitive control: Turning conflict into action.

    Science.gov (United States)

    Schmid, Petra C; Kleiman, Tali; Amodio, David M

    2015-06-01

    Power is known to promote effective goal pursuit, especially when it requires one to overcome distractions or bias. We proposed that this effect involves the ability to engage and implement cognitive control. In Study 1, we demonstrated that power enhances behavioral performance on a response conflict task and that it does so by enhancing controlled processing rather than by reducing automatic processing. In Study 2, we used an event-related potential index of anterior cingulate activity to test whether power effects on control were due to enhanced conflict sensitivity or action implementation. Power did not significantly affect neural sensitivity to conflict; rather, high power was associated with a stronger link between conflict processing and intended action, relative to low power. These findings suggest a new perspective on how social factors can affect controlled processing and offer new evidence regarding the transition between conflict detection and the implementation of action control.

  12. Utility based Power Control with FEC in Hexagonally deployed WSN

    Directory of Open Access Journals (Sweden)

    Rajendran Valli

    2012-03-01

    Full Text Available The fundamental component of resource management in Wireless Sensor Network (WSN is transmitter power control since they are miniature battery powered devices. An efficient power control technique is essential to maintain reliable communication links in WSN and to maintain the battery life of the sensor node and in turn the sensor network. Error control coding (ECC schemes can improve the system performance and has an impact on energy consumption. This paper analyses a game theoretic model with pricing for power control in a sensor network considering ECC for random, square, triangular and hexagonal deployment schemes. The performance of the proposed power control scheme with RS and MIDRS code for WSN is evaluated in terms of utility, and energy consumption. Simulation results show that, for hexagonal deployment scheme, with the inclusion of ECC, the transmitting power of the nodes is reduced thereby saving energy and increasing the network lifetime

  13. A Fuzzy Control System of Turbine Rotate Speed and Power for a Power Plant Simulator

    Institute of Scientific and Technical Information of China (English)

    史小平; 王子才

    2002-01-01

    In this paper, a fuzzy control system of turbine rotate speed and power for a power plant simulator is designed. Rotate speed and power control is a rather important technique in a thermal power plant, because the rotate speed of the turbine rotor and the power of the generator must be enhanced gradually in order to prevent the relative expansion of the cylinder from increasing abruptly. The two parameters of a turbine used to be controlled manually or manual-automatically. To improve the control quality and the automation level, a fuzzy control method is developed for apower plant simulator to fit the DCS (Distributed Control System). The results of practical debugging on the simulator are shown in the paper to demonstrate the correctness and effectiveness of the presented fuzzy control law.

  14. Economic COP Optimization of a Heat Pump with Hierarchical Model Predictive Control

    DEFF Research Database (Denmark)

    Tahersima, Fatemeh; Stoustrup, Jakob; Rasmussen, Henrik

    2012-01-01

    A low-temperature heating system is studied in this paper. It consists of hydronic under-floor heating pipes and an air/ground source heat pump. The heat pump in such a setup is conventionally controlled only by feed-forwarding the ambient temperature. Having shown >10% cut-down on electricity...... bills by involving feedback control in a previous study, this paper has continued the same line of argument and has investigated effects of a priori knowledge on weather forecast and electricity price profile to alleviate the total electricity cost subject to constraints on resident's thermal comfort......'s coefficient of performance. At the same time, it determines the actual temperature set-points of the rooms by deviating from the user-defined set-points within a thermal tolerance zone. Simulations results confirm significant cut-down on electricity bills without sacrificing resident thermal comfort...

  15. Multiple-Time-Scales Hierarchical Frequency Stability Control Strategy of Medium-Voltage Isolated Microgrid

    DEFF Research Database (Denmark)

    Zhao, Zhuoli; Yang, Ping; Guerrero, Josep M.

    2016-01-01

    In this paper, an islanded medium-voltage (MV) microgrid placed in Dongao Island is presented, which integrates renewable-energy-based distributed generations (DGs), energy storage system (ESS), and local loads. In an isolated microgrid without connection to the main grid to support the frequency...... of Zone B. Theoretical analysis, time-domain simulation and field test results under various conditions and scenarios in the Dongao Island microgrid are presented to prove the validity of the introduced control strategy....

  16. High Performance Low Cost Digitally Controlled Power Conversion Technology

    DEFF Research Database (Denmark)

    Jakobsen, Lars Tønnes

    2008-01-01

    Digital control of switch-mode power supplies and converters has within the last decade evolved from being an academic subject to an emerging market in the power electronics industry. This development has been pushed mainly by the computer industry that is looking towards digital power management...

  17. Model based active power control of a wind turbine

    DEFF Research Database (Denmark)

    Mirzaei, Mahmood; Soltani, Mohsen; Poulsen, Niels Kjølstad;

    2014-01-01

    in the electricity market that selling the reserve power is more profitable than producing with the full capacity. Therefore wind turbines can be down-regulated and sell the differential capacity as the reserve power. In this paper we suggest a model based approach to control wind turbines for active power reference...

  18. Microcomputer Control of a Hydraulic Power Element.

    Science.gov (United States)

    1986-12-01

    Electrohydraulic (EHD) Servovalves .................... 9 3. Advantages of EHD Servovalves .......................................... 10 4. Control System Types ................................. 10...positional control with less error. [Ref. 3:pp. 1-21 4. Control System Types Control systems are the means by which servovalves can be used to obtain a

  19. Power-Based Control for a Bidirectional AC-DC Power Converter

    NARCIS (Netherlands)

    del Puerto Flores, Dunstano; Scherpen, Jacquelien M.A.

    2011-01-01

    In many electrical applications it is indispensable that the power converter can operate as a generating or rectifier unit, and the controller must be able to handle this bidirectional power flow. An application example is the doubly fed induction machine, where power can flow in both directions thr

  20. Mesochanneled hierarchically porous aluminosiloxane aerogel microspheres as a stable support for pH-responsive controlled drug release.

    Science.gov (United States)

    Vazhayal, Linsha; Talasila, Sindhoor; Abdul Azeez, Peer Mohamed; Solaiappan, Ananthakumar

    2014-09-10

    The molecular-scale self-assembly of a 3D aluminosiloxane (Al-O-Si) hybrid gel network was successfully performed via the cocondensation of hydrolyzed alumina (AlOOH) and (3-aminopropyl)trimethoxysilane (APS). It was transformed into a microspherical aerogel framework of Al-O-Si containing mesochannels with tunable hierarchically bimodal meso/macroporosities by a subcritical drying technique. Good homogeneity of AlOOH and APS brought during the synthesis guaranteed a uniform distribution of two metal oxides in a single body. A systematic characterization of the aerogel support was carried out using FTIR, SEM, TEM, nitrogen adsorption/desorption analysis, WAXS, SAXS, and ξ-potential measurement in order to explore the material for drug uptake and release. The drug loading and release capacity and chemical stability of an aluminosiloxane aerogel were studied using two nonsteroidal antiinflammatory drugs, ibuprofen and aspirin. A comprehensive evaluation of the aluminosiloxane aerogel with ordered mesoporous MCM-41 was also performed. Aerogel supports showed a high drug loading capacity and a pH-responsive controlled-release property compared to MCM-41. Meanwhile, kinetic modeling studies indicate that the drug releases with a zero-order profile following the Korsmeyer-Peppas model. The biocompatibility of aluminosiloxane aerogels was established via ex vivo and in vivo studies. We also outline the use of aluminosiloxane aerogel as a support for a possible 3D matrix for an osteoconductive structure for bone tissue engineering.

  1. Controlled lecithin release from a hierarchical architecture on blood-contacting surface to reduce hemolysis of stored red blood cells.

    Science.gov (United States)

    Shi, Qiang; Fan, Qunfu; Ye, Wei; Hou, Jianwen; Wong, Shing-Chung; Xu, Xiaodong; Yin, Jinghua

    2014-06-25

    Hemolysis of red blood cells (RBCs) caused by implant devices in vivo and nonpolyvinyl chloride containers for RBC preservation in vitro has recently gained much attention. To develop blood-contacting biomaterials with long-term antihemolysis capability, we present a facile method to construct a hydrophilic, 3D hierarchical architecture on the surface of styrene-b-(ethylene-co-butylene)-b-styrene elastomer (SEBS) with poly(ethylene oxide) (PEO)/lecithin nano/microfibers. The strategy is based on electrospinning of PEO/lecithin fibers onto the surface of poly [poly(ethylene glycol) methyl ether methacrylate] [P(PEGMEMA)]-modified SEBS, which renders SEBS suitable for RBC storage in vitro. We demonstrate that the constructed 3D architecture is composed of hydrophilic micro- and nanofibers, which transforms to hydrogel networks immediately in blood; the controlled release of lecithin is achieved by gradual dissolution of PEO/lecithin hydrogels, and the interaction of lecithin with RBCs maintains the membrane flexibility and normal RBC shape. Thus, the blood-contacting surface reduces both mechanical and oxidative damage to RBC membranes, resulting in low hemolysis of preserved RBCs. This work not only paves new way to fabricate high hemocompatible biomaterials for RBC storage in vitro, but provides basic principles to design and develop antihemolysis biomaterials for implantation in vivo.

  2. Choosing Actuators for Automatic Control Systems of Thermal Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Gorbunov, A. I., E-mail: gor@tornado.nsk.ru [JSC “Tornado Modular Systems” (Russian Federation); Serdyukov, O. V. [Siberian Branch of the Russian Academy of Sciences, Institute of Automation and Electrometry (Russian Federation)

    2015-03-15

    Two types of actuators for automatic control systems of thermal power plants are analyzed: (i) pulse-controlled actuator and (ii) analog-controlled actuator with positioning function. The actuators are compared in terms of control circuit, control accuracy, reliability, and cost.

  3. Power Control in Wireless Sensor Networks with Variable Interference

    Directory of Open Access Journals (Sweden)

    Michele Chincoli

    2016-01-01

    Full Text Available Adaptive transmission power control schemes have been introduced in wireless sensor networks to adjust energy consumption under different network conditions. This is a crucial goal, given the constraints under which sensor communications operate. Power reduction may however have counterproductive effects to network performance. Yet, indiscriminate power boosting may detrimentally affect interference. We are interested in understanding the conditions under which coordinated power reduction may lead to better spectrum efficiency and interference mitigation and, thus, have beneficial effects on network performance. Through simulations, we analyze the performance of sensor nodes in an environment with variable interference. Then we study the relation between transmission power and communication efficiency, particularly in the context of Adaptive and Robust Topology (ART control, showing how appropriate power reduction can benefit both energy and spectrum efficiency. We also identify critical limitations in ART, discussing the potential of more cooperative power control approaches.

  4. Modeling and sensitivity analysis of consensus algorithm based distributed hierarchical control for dc microgrids

    DEFF Research Database (Denmark)

    Meng, Lexuan; Dragicevic, Tomislav; Vasquez, Juan Carlos

    2015-01-01

    of dynamic study. The aim of this paper is to model the complete DC microgrid system in z-domain and perform sensitivity analysis for the complete system. A generalized modeling method is proposed and the system dynamics under different control parameters, communication topologies and communication speed...... the dynamics of electrical and communication systems interact with each other. Apart from that, the communication characteristics also affect the dynamics of the system. Due to discrete nature of information exchange in communication network, Laplace domain analysis is not accurate enough for this kind...

  5. Admission Control for Multiservices Traffic in Hierarchical Mobile IPv6 Networks by Using Fuzzy Inference System

    Directory of Open Access Journals (Sweden)

    Jung-Shyr Wu

    2012-01-01

    Full Text Available CAC (Call Admission Control plays a significant role in providing QoS (Quality of Service in mobile wireless networks. In addition to much research that focuses on modified Mobile IP to get better efficient handover performance, CAC should be introduced to Mobile IP-based network to guarantee the QoS for users. In this paper, we propose a CAC scheme which incorporates multiple traffic types and adjusts the admission threshold dynamically using fuzzy control logic to achieve better usage of resources. The method can provide QoS in Mobile IPv6 networks with few modifications on MAP (Mobility Anchor Point functionality and slight change in BU (Binding Update message formats. According to the simulation results, the proposed scheme presents good performance of voice and video traffic at the expenses of poor performance on data traffic. It is evident that these CAC schemes can reduce the probability of the handoff dropping and the cell overload and limit the probability of the new call blocking.

  6. Building on the Enriched Hierarchical Model of Achievement Motivation: Autonomous and Controlling Reasons Underlying Mastery Goals

    Directory of Open Access Journals (Sweden)

    Aikaterini Michou

    2016-07-01

    Full Text Available Two motivational theories – the Achievement Goal Theory and Self-Determination Theory – have recently been combined to explain students’ motivation, making it possible to study the “what” and the “why” of learners’ achievement strivings. The present study built on this approach by (a investigating whether the distinction between autonomous or volitional and controlling or pressuring reasons can be meaningfully applied to the adoption of mastery-avoidance goals, (b investigating the concurrent and prospective relations between mastery-avoidance goals and their underlying reasons and learning strategies when mastery-approach goals and their underlying reasons were also considered, and by (c incorporating psychological need experiences as an explanatory variable in the relation between achievement motives (i.e., the motive to succeed and motive to avoid failure and both mastery goals and their underlying reasons. In two Turkish university students samples ('N' = 226, 'Mage '= 22.36; 'N' = 331, 'Mage '= 19.5, autonomous and controlling reasons appeared applicable to mastery-avoidance goals and regression and path analysis further showed that mastery-avoidance goals and their underlying autonomous reasons fail to predicted learning strategies over and above the pursuit of mastery-approach goals and their underlying reasons. Finally, need experiences were established as mediators between achievement motives and both mastery goals and their underlying reasons.

  7. Using tobacco mosaic virus template for the fabrication of three-dimensional hierarchical microbattery electrodes with high energy and high power density

    Science.gov (United States)

    Pomerantseva, Ekaterina; Gerasopoulos, Konstantinos; Gnerlich, Markus; Odenwald, Philipp; Culver, James; Ghodssi, Reza

    2013-09-01

    We present a novel approach for the fabrication of lithium-ion microbattery electrodes which deliver high energy and high power density. The key enabling technology is the use of self-assembled Tobacco mosaic virus (TMV) nanoforests as a template for active battery materials. The self-assembling TMV is a genetically modified biological nanorod with increased metal binding properties for enhanced manufacturability. High energy density is achieved due to the active surface area increase within a given footprint by combining TMV with three-dimensional (3D) microfabricated structures. The TMV nanostructure enables high power density through larger electrode/electrolyte contact area and faster charge transport. The electrodes consist of an array of electroplated gold micropillars. The pillars are coated with the self-assembled nanoscale TMV template and subsequently metalized in-place. Active battery material (V2O5) is conformally deposited using atomic layer deposition (ALD) on the hierarchical micro/nano network. Electrochemical testing of these electrodes indicates a 3-5 fold increase in energy density, compared to the TMV-templated electrodes without micropillars, without increasing footprint area or reducing rate performance. Further increase in energy density can be achieved by increasing surface area of 3D microelements as demonstrated by fabrication and electrochemical testing of the electrodes with hollow gold micropillars. Scaling up energy density by increasing active material thickness beyond 100 nm revealed some loss in surface area which highlighted the importance of nanoscale engineering for achieving maximum energy and power density in energy storage systems.

  8. Model-free adaptive control of advanced power plants

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, George Shu-Xing; Mulkey, Steven L.; Wang, Qiang

    2015-08-18

    A novel 3-Input-3-Output (3.times.3) Model-Free Adaptive (MFA) controller with a set of artificial neural networks as part of the controller is introduced. A 3.times.3 MFA control system using the inventive 3.times.3 MFA controller is described to control key process variables including Power, Steam Throttle Pressure, and Steam Temperature of boiler-turbine-generator (BTG) units in conventional and advanced power plants. Those advanced power plants may comprise Once-Through Supercritical (OTSC) Boilers, Circulating Fluidized-Bed (CFB) Boilers, and Once-Through Supercritical Circulating Fluidized-Bed (OTSC CFB) Boilers.

  9. Model-free adaptive control of advanced power plants

    Science.gov (United States)

    Cheng, George Shu-Xing; Mulkey, Steven L.; Wang, Qiang

    2015-08-18

    A novel 3-Input-3-Output (3.times.3) Model-Free Adaptive (MFA) controller with a set of artificial neural networks as part of the controller is introduced. A 3.times.3 MFA control system using the inventive 3.times.3 MFA controller is described to control key process variables including Power, Steam Throttle Pressure, and Steam Temperature of boiler-turbine-generator (BTG) units in conventional and advanced power plants. Those advanced power plants may comprise Once-Through Supercritical (OTSC) Boilers, Circulating Fluidized-Bed (CFB) Boilers, and Once-Through Supercritical Circulating Fluidized-Bed (OTSC CFB) Boilers.

  10. Optimization and Control of Electric Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Lesieutre, Bernard C. [Univ. of Wisconsin, Madison, WI (United States); Molzahn, Daniel K. [Univ. of Wisconsin, Madison, WI (United States)

    2014-10-17

    The analysis and optimization needs for planning and operation of the electric power system are challenging due to the scale and the form of model representations. The connected network spans the continent and the mathematical models are inherently nonlinear. Traditionally, computational limits have necessitated the use of very simplified models for grid analysis, and this has resulted in either less secure operation, or less efficient operation, or both. The research conducted in this project advances techniques for power system optimization problems that will enhance reliable and efficient operation. The results of this work appear in numerous publications and address different application problems include optimal power flow (OPF), unit commitment, demand response, reliability margins, planning, transmission expansion, as well as general tools and algorithms.

  11. Coordinated Frequency Control of Wind Turbines in Power Systems with High Wind Power Penetration

    DEFF Research Database (Denmark)

    Tarnowski, Germán Claudio

    particular views. These models were developed and verified during this work, basedaround a particular manufacturer’s wind turbine and on said isolated power system withwind power. The capability of variable speed wind turbines for providing Inertial Response is analysed. To perform this assessment, a control...... and the dynamic stability of the grid frequency under large disturbances would be compromised. The aim of this study is to investigate the integration of large scale wind power generation in power systems and its active power control.Novel methods and solutions dealing specifically with the electric frequency...... stability and high wind power penetration or in islanding situations are addressed. The review of relevant theoretical concepts is supported by measurements carried out on an isolated power system characterized by high wind power penetration. Different mathematical and simulation models are used in several...

  12. Automated electric power management and control for Space Station Freedom

    Science.gov (United States)

    Dolce, James L.; Mellor, Pamela A.; Kish, James A.

    1990-01-01

    A comprehensive automation design is being developed for Space Station Freedom's electric power system. It strives to increase station productivity by applying expert systems and conventional algorithms to automate power system operation. An integrated approach to the power system command and control problem is defined and used to direct technology development in: diagnosis, security monitoring and analysis, battery management, and cooperative problem-solving for resource allocation. The prototype automated power system is developed using simulations and test-beds.

  13. Power flow control using distributed saturable reactors

    Energy Technology Data Exchange (ETDEWEB)

    Dimitrovski, Aleksandar D.

    2016-02-13

    A magnetic amplifier includes a saturable core having a plurality of legs. Control windings wound around separate legs are spaced apart from each other and connected in series in an anti-symmetric relation. The control windings are configured in such a way that a biasing magnetic flux arising from a control current flowing through one of the plurality of control windings is substantially equal to the biasing magnetic flux flowing into a second of the plurality of control windings. The flow of the control current through each of the plurality of control windings changes the reactance of the saturable core reactor by driving those portions of the saturable core that convey the biasing magnetic flux in the saturable core into saturation. The phasing of the control winding limits a voltage induced in the plurality of control windings caused by a magnetic flux passing around a portion of the saturable core.

  14. Integrated low power digital gyro control electronics

    Science.gov (United States)

    M'Closkey, Robert (Inventor); Challoner, A. Dorian (Inventor); Grayver, Eugene (Inventor); Hayworth, Ken J. (Inventor)

    2005-01-01

    Embodiments of the invention generally encompass a digital, application specific integrated circuit (ASIC) has been designed to perform excitation of a selected mode within a vibratory rate gyroscope, damping, or force-rebalance, of other modes within the sensor, and signal demodulation of the in-phase and quadrature components of the signal containing the angular rate information. The ASIC filters dedicated to each channel may be individually programmed to accommodate different rate sensor designs/technology or variations within the same class of sensors. The ASIC architecture employs a low-power design, making the ASIC, particularly suitable for use in power-sensitive applications.

  15. Feasibility Study B-1 Power Controller.

    Science.gov (United States)

    1979-11-01

    Study performed by the Autonetics Strategic Systems Division ( ASSD ) of Rockwell International on Contract N62269-79-C-0294. The objective of this study...Modify the design of the ASSD B-1 SSPC, Part Number 12880-507-1, to be a 115 Vac quadruple SSPC unit, with a SOSTEL compatible interface. 3.1.2 115 Vac...Primary Power Modifications. The ASSD SSPC Unit, Appendix A, contains four identical PC’s operating from 230 Vac primary power. Referring to Figure 1

  16. Control of Fuel Cell Power System

    OpenAIRE

    KOCALMIŞ BİLHAN, Ayşe; Wang, Caisheng

    2017-01-01

    In recent years, it is gettingattention for renewable energy sources such as Fuel Cell (FC), batteries,ultracapacitors or photovoltaic panels (PV) for distributed power generationsystems (DG) or electrical vehicles. This paper proposes a DC/DC converter andDC/AC inverter scheme to combine the Fuel Cell Stack (FC). The power systemconsist of a FC stack, a DC/DC converter, inverter and load. A FC mostly couldnot produce necessary output voltage, the DC/DC boost converter is used forobtaining th...

  17. Multiagent based protection and control in decentralized electric power systems

    DEFF Research Database (Denmark)

    Saleem, Arshad; Lind, Morten; Veloso, Manuela

    2010-01-01

    created interesting possibilities for application of intelligent systems such as multiagent systems for control and automation in electric power systems. This paper describes work on designing a multiagent system for protection and control of electric power distribution networks.It demonstrates how......Electric power systems are going through a major change both in their physical and control structure. A large num- ber of small and geographically dispersed power generation units (e.g., wind turbines, solar cells, plug-in electric cars) are replacing big centralized power plants. This shift has...... explicit modeling of capabilities, states, roles and role transition in agents can capture the control and automation in electric power systems. We present illustrative results from using our proposed schema in realistic simulations....

  18. Multiagent based protection and control in decentralized electric power systems

    DEFF Research Database (Denmark)

    Saleem, Arshad; Lind, Morten; Veloso, Manuela

    2010-01-01

    Electric power systems are going through a major change both in their physical and control structure. A large num- ber of small and geographically dispersed power generation units (e.g., wind turbines, solar cells, plug-in electric cars) are replacing big centralized power plants. This shift has...... created interesting possibilities for application of intelligent systems such as multiagent systems for control and automation in electric power systems. This paper describes work on designing a multiagent system for protection and control of electric power distribution networks.It demonstrates how...... explicit modeling of capabilities, states, roles and role transition in agents can capture the control and automation in electric power systems. We present illustrative results from using our proposed schema in realistic simulations....

  19. Power control for wind turbines in weak grids: Concepts development

    DEFF Research Database (Denmark)

    Bindner, H.

    1999-01-01

    and analyze methods and technologies for making it viable to utilize more of the wind potential in remote areas. The suggestion is to develop a power control concept for wind turbines which will even out thepower fluctuations and make it possible to increase the wind energy penetration. The main options...... will make wind power more firm and possible to connect to weaker grids. So, when the concept is matured, theexpectation is that for certain wind power installations, the cost of the power control is paid back as added wind power capacity value and saved grid reinforcement costs. Different systems...... for controlling the power output from a wind farm connected to aweak grid have been investigated. The investigation includes development of different control strategies, use of different storage types, development of a framework for comparing different options and tools needed as part of the framework...

  20. Evaluation of power control with different electrical and control concept of wind farm

    DEFF Research Database (Denmark)

    Margaris, Ioannis; Hansen, Anca Daniela

    This report investigates the impact of wind power in non interconnected power systems with increasing wind power penetration. Issues such as power fluctuations, short circuits and FRT capability of wind turbines and frequency control support are under focus. The study case of Rhodes power system...

  1. Cooperative Control of Active Power Filters in Power Systems without Mutual Communication

    Directory of Open Access Journals (Sweden)

    Josef Tlustý

    2010-01-01

    Full Text Available The procedure for calculating controller parameters of the APFs implemented into a multibus industrial power system for harmonic voltage mitigation is presented. The node-voltage-detection control strategy is applied and the basic controller parameters are found under the condition that the demanded THD factors at the buses where the APFs are placed will be obtained. A cooperative control of several APFs without mutual communication is proposed, simulated, and experimentally verified. By tuning the controller gains without considering the power circuit parameters, all APFs used tend to share harmonic load currents approximately equally regardless of the operation modes of the nonlinear loads in different parts of the power system.

  2. Development of the power control system for semiconductor lasers

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kwang Suk; Kim, Cheol Jung

    1997-12-01

    For the first year plan of this program, we developed the power control system for semiconductor lasers. We applied the high-current switching mode techniques to fabricating a power control system. Then, we investigated the direct side pumping techniques with GaA1As diode laser bars to laser crystal without pumping optics. We obtained 0.5W average output power from this DPSSL. (author). 54 refs., 3 tabs., 18 figs.

  3. Design and Control of a Powered Transfemoral Prosthesis

    OpenAIRE

    Sup, Frank; Bohara, Amit; Goldfarb, Michael

    2008-01-01

    The paper describes the design and control of a transfemoral prosthesis with powered knee and ankle joints. The initial prototype is a pneumatically actuated powered-tethered device, which is intended to serve as a laboratory test bed for a subsequent self-powered version. The prosthesis design is described, including its kinematic optimization and the design of a three-axis socket load cell that measures the forces and moments of interaction between the socket and prosthesis. A gait controll...

  4. Reactive power control with CHP plants - A demonstration

    DEFF Research Database (Denmark)

    Nyeng, Preben; Østergaard, Jacob; Andersen, Claus A.;

    2010-01-01

    power rating of 7.3 MW on two synchronous generators. A closed-loop control is implemented, that remote controls the CHP plant to achieve a certain reactive power flow in a near-by substation. The solution communicates with the grid operator’s existing SCADA system to obtain measurements from...

  5. Adaptive voltage control in power systems modeling, design and applications

    CERN Document Server

    Fusco, Giuseppe

    2006-01-01

    Large-scale power cuts in both North America and Europe emphasised the need to maintain an adequate supply of high-quality electricity. This book offers information on the relatively low-cost of doing so using self-regulating control mechanisms. It is of interest to the practising power/control engineer and to academics needing industrial inputs.

  6. neural network based load frequency control for restructuring power ...

    African Journals Online (AJOL)

    2012-03-01

    Mar 1, 2012 ... the system in the back propagation chain used in controller training. For this ... power systems. Different types of controllers ... role to allow power exchanges and to supply bet- ter conditions for the ... To solve all these problems in the above men- ..... term load forecasting using generalized neural network ...

  7. High-power CSI-fed induction motor drive with optimal power distribution based control

    Science.gov (United States)

    Kwak, S.-S.

    2011-11-01

    In this article, a current source inverter (CSI) fed induction motor drive with an optimal power distribution control is proposed for high-power applications. The CSI-fed drive is configured with a six-step CSI along with a pulsewidth modulated voltage source inverter (PWM-VSI) and capacitors. Due to the PWM-VSI and the capacitor, sinusoidal motor currents and voltages with high quality as well as natural commutation of the six-step CSI can be obtained. Since this CSI-fed drive can deliver required output power through both the six-step CSI and PWM-VSI, this article shows that the kVA ratings of both the inverters can be reduced by proper real power distribution. The optimal power distribution under load requirements, based on power flow modelling of the CSI-fed drive, is proposed to not only minimise the PWM-VSI rating but also reduce the six-step CSI rating. The dc-link current control of the six-step CSI is developed to realise the optimal power distribution. Furthermore, a vector controlled drive for high-power induction motors is proposed based on the optimal power distribution. Experimental results verify the high-power CSI-fed drive with the optimal power distribution control.

  8. Optimizd Design of Power Scheduling in WSN Based on Sink Root Data Tree with Hierarchical Clustering%Sink根数据聚集树分层的WSN电力调度优化设计

    Institute of Scientific and Technical Information of China (English)

    朱文忠

    2014-01-01

    为提高电力数据调度效率,缩短电力数据调度延时,提出一种改进的无通信冲突的分布式电力数据聚集调度近似算法,采用Sink根数据聚集树对无线传感器网络中各个节点电力资源数据进行分层数据调度,根据分布式数据集对各个电力节点之间的控制信息进行不断融合处理,在最大独立集的基础上建立一棵根在Sink的数据聚集树。每个节点分配一个时间片,使该节点能在无通信冲突的情况下传输数据。仿真实验表明,采用改进算法得到的聚集延时明显减小,有效保证了电力调度控制的实时性,电力信息数据分层融合度能达到90%以上,而改进前的算法只有10%~50%之间。%In order to improve the power data scheduling efficiency, shorten the power data scheduling delay, and improve matching and integration degree, and improved power scheduling optimization design method based on Sink root data tree hierarchical clustering was proposed for improve the management efficiency. We established a tree root in the Sink data ag-gregation tree based on the maximum independent set. Each node was assigned a time slice, so that the node could transmit data in the absence of communication conflict situations. Simulation results show that the improved algorithm has signifi-cantly reduced aggregation delay, and it has effectively ensured the real-time dispatching control, and the data hierarchical fusion degree can reach more than 90%, while the former algorithm is only 10%~50%.

  9. Reactive power control of wind-diesel-micro-hydro hybrid power systems using matlab/simulink

    Energy Technology Data Exchange (ETDEWEB)

    Bansal, R.C.; Bhatti, T.S.; Kothari, D.P.; Bhat, S. [Birla Inst. of Technology and Science, Pilani (India); Indian Inst. of Technology, New Delhi (India). Centre for Energy Studies; Visvesvaraya National Inst. of Technology, Nagpur (IN). Dept. of Electrical Engineering)

    2005-07-01

    This paper presents reactive power control of isolated wind-diesel-micro-hydro hybrid power system for realistic load disturbance using matlab/simulink. The mathematical model of the system based on matlab/simulink is developed. Reactive power control performance is compared using three different types of Static VAR Compensators (SVC). Transient responses for step plus normally distributed or band limited white noise random change in load have also been presented in this paper. (Author)

  10. Maximum Power Point Tracking and Reactive Power Control of Single Stage Grid Connected Photovoltaic System

    OpenAIRE

    2011-01-01

    Single-stage grid-connected Photovoltaic (PV) systems have advantages such as simple topology, high efficiency, etc. However, since all the control objectives such as the maximum power point tracking (with the utility voltage, and harmonics reduction for output current need to be considered simultaneously, the complexity of the control scheme is much increased. In this paper a new type of grid connected photovoltaic (PV) system with Maximum Power Point Tracking (MPPT) and reactive power simul...

  11. Regime-based supervisory control to reduce power fluctuations from offshore wind power plants

    DEFF Research Database (Denmark)

    Barahona Garzón, Braulio; Cutululis, Nicolaos Antonio; Trombe, Pierre-Julien

    2013-01-01

    of production, hence revenue for the wind farm operator. On the other hand, progresses in short term forecasting, together with the increasing use of probabilistic forecasting can help in achieving efficient power fluctuations reduction with minimum lost production. Here we present supervisory control concepts...... that consider different wind power regimes to derive control setpoints by using a Markov-Switching AutoRegressive model. We evaluate the performance versus measured data in terms of power ramp characteristics and energy efficiency....

  12. A Hybrid Optimization Method for Reactive Power and Voltage Control Considering Power Loss Minimization

    DEFF Research Database (Denmark)

    Liu, Chengxi; Qin, Nan; Bak, Claus Leth;

    2015-01-01

    This paper proposes a hybrid optimization method to optimally control the voltage and reactive power with minimum power loss in transmission grid. This approach is used for the Danish automatic voltage control (AVC) system which is typically a non-linear non-convex problem mixed with both continu...

  13. Performance and Analysis of Reactive Power Compensation by Unified Power Flow Controller

    Directory of Open Access Journals (Sweden)

    Yogita Kumari

    2015-09-01

    Full Text Available The Unified Power Flow Controller (UPFC is the most versatile of the FACTS controllers envisaged so far. The main function of the UPFC is to control the flow of real and reactive power by injection of a voltage in series with the transmission line. Both the magnitude and the phase angle of the voltage can be varied independently. Real and Reactive power flow control can allow for power flow in prescribed routes, loading of transmission lines close to their thermal limits and can be utilized for improving transient and small signal stability of the power system. In this paper UPFC is incorporated in a SMIB (Single Machine Infinite Bus system and the response of SMIB system has been recorded with and without UPFC, thereafter the comparison of both the output has been done. When no UPFC is installed, real and reactive power through the transmission line cannot be controlled. This paper presents control and performance of UPFC intended for installation on that transmission line to control power flow. Installing the UPFC makes it possible to control amount of active power flowing through the line. Simulations are carried out using MATLAB software to validate the performance of the UPFC.

  14. Template-particle stabilized bicontinuous emulsion yielding controlled assembly of hierarchical high-flux filtration membranes.

    Science.gov (United States)

    Hess, Samuel C; Kohll, A Xavier; Raso, Renzo A; Schumacher, Christoph M; Grass, Robert N; Stark, Wendelin J

    2015-01-14

    A novel solvent-evaporation-based process that exploits template-particle stabilized bicontinuous emulsions for the formation of previously unreached membrane morphologies is reported in this article. Porous membranes have a wide range of applications spanning from water filtration, pharmaceutical purification, and battery separators to scaffolds for tissue engineering. Different situations require different membrane morphologies including various pore sizes and pore gradients. However, most of the previously reported membrane preparation procedures are restricted to specific morphologies and morphology alterations require an extensive optimization process. The tertiary system presented in this article, which consists of a poly(ether sulfone)/dimethylacetamide (PES/DMAc) solution, glycerol, and ZnO-nanoparticles, allows simple and exact tuning of pore diameters ranging from sub-20 nm, up to 100 nm. At the same time, the pore size gradient is controlled from 0 up to 840%/μm yielding extreme asymmetry. In addition to structural analysis, water flux rates of over 5600 L m(-2) h(-1) are measured for membranes retaining 45 nm silica beads.

  15. Controlling the contractile strength of engineered cardiac muscle by hierarchal tissue architecture.

    Science.gov (United States)

    Feinberg, Adam W; Alford, Patrick W; Jin, Hongwei; Ripplinger, Crystal M; Werdich, Andreas A; Sheehy, Sean P; Grosberg, Anna; Parker, Kevin Kit

    2012-08-01

    The heart is a muscular organ with a wrapping, laminar structure embedded with neural and vascular networks, collagen fibrils, fibroblasts, and cardiac myocytes that facilitate contraction. We hypothesized that these non-muscle components may have functional benefit, serving as important structural alignment cues in inter- and intra-cellular organization of cardiac myocytes. Previous studies have demonstrated that alignment of engineered myocardium enhances calcium handling, but how this impacts actual force generation remains unclear. Quantitative assays are needed to determine the effect of alignment on contractile function and muscle physiology. To test this, micropatterned surfaces were used to build 2-dimensional myocardium from neonatal rat ventricular myocytes with distinct architectures: confluent isotropic (serving as the unaligned control), confluent anisotropic, and 20 μm spaced, parallel arrays of multicellular myocardial fibers. We combined image analysis of sarcomere orientation with muscular thin film contractile force assays in order to calculate the peak sarcomere-generated stress as a function of tissue architecture. Here we report that increasing peak systolic stress in engineered cardiac tissues corresponds with increasing sarcomere alignment. This change is larger than would be anticipated from enhanced calcium handling and increased uniaxial alignment alone. These results suggest that boundary conditions (heterogeneities) encoded in the extracellular space can regulate muscle tissue function, and that structural organization and cytoskeletal alignment are critically important for maximizing peak force generation.

  16. Stability and control of wind farms in power systems

    DEFF Research Database (Denmark)

    Jauch, Clemens

    oscillating power injection can only be realised by controlling the pitch angle.Hence the power system stabiliser of an active-stall turbine is a pitch angle controller. Two different approaches are chosen for designing such a power system stabiliser: a conventional PID controller, and a fuzzy logic...... is part of the project. The mostextensive modelling work deals with the design of the electrical part of the variable speed turbine and its controls. To simulate realistic grid operation the wind turbine models are connected to an aggregated model of the Nordic power system. For thatpurpose the Nordic...... power system model, which was available prior to the project, is extended with a realistic feeder configuration. It is commonly demanded from modern wind turbines, that they must not disconnect in case of transient faults. Therefore,controllers are designed that enable the two turbine types to ride...

  17. Hybrid zero-voltage switching (ZVS) control for power inverters

    Science.gov (United States)

    Amirahmadi, Ahmadreza; Hu, Haibing; Batarseh, Issa

    2016-11-01

    A power inverter combination includes a half-bridge power inverter including first and second semiconductor power switches receiving input power having an intermediate node therebetween providing an inductor current through an inductor. A controller includes input comparison circuitry receiving the inductor current having outputs coupled to first inputs of pulse width modulation (PWM) generation circuitry, and a predictive control block having an output coupled to second inputs of the PWM generation circuitry. The predictive control block is coupled to receive a measure of Vin and an output voltage at a grid connection point. A memory stores a current control algorithm configured for resetting a PWM period for a switching signal applied to control nodes of the first and second power switch whenever the inductor current reaches a predetermined upper limit or a predetermined lower limit.

  18. Advanced and intelligent control in power electronics and drives

    CERN Document Server

    Blaabjerg, Frede; Rodríguez, José

    2014-01-01

    Power electronics and variable frequency drives are continuously developing multidisciplinary fields in electrical engineering, and it is practically not possible to write a book covering the entire area by one individual specialist. Especially by taking account the recent fast development in the neighboring fields like control theory, computational intelligence and signal processing, which all strongly influence new solutions in control of power electronics and drives. Therefore, this book is written by individual key specialist working on the area of modern advanced control methods which penetrates current implementation of power converters and drives. Although some of the presented methods are still not adopted by industry, they create new solutions with high further research and application potential. The material of the book is presented in the following three parts: Part I: Advanced Power Electronic Control in Renewable Energy Sources (Chapters 1-4), Part II: Predictive Control of Power Converters and D...

  19. Power control and management of the grid containing largescale wind power systems

    Science.gov (United States)

    Aula, Fadhil Toufick

    The ever increasing demand for electricity has driven many countries toward the installation of new generation facilities. However, concerns such as environmental pollution and global warming issues, clean energy sources, high costs associated with installation of new conventional power plants, and fossil fuels depletion have created many interests in finding alternatives to conventional fossil fuels for generating electricity. Wind energy is one of the most rapidly growing renewable power sources and wind power generations have been increasingly demanded as an alternative to the conventional fossil fuels. However, wind power fluctuates due to variation of wind speed. Therefore, large-scale integration of wind energy conversion systems is a threat to the stability and reliability of utility grids containing these systems. They disturb the balance between power generation and consumption, affect the quality of the electricity, and complicate load sharing and load distribution managing and planning. Overall, wind power systems do not help in providing any services such as operating and regulating reserves to the power grid. In order to resolve these issues, research has been conducted in utilizing weather forecasting data to improve the performance of the wind power system, reduce the influence of the fluctuations, and plan power management of the grid containing large-scale wind power systems which consist of doubly-fed induction generator based energy conversion system. The aims of this research, my dissertation, are to provide new methods for: smoothing the output power of the wind power systems and reducing the influence of their fluctuations, power managing and planning of a grid containing these systems and other conventional power plants, and providing a new structure of implementing of latest microprocessor technology for controlling and managing the operation of the wind power system. In this research, in order to reduce and smooth the fluctuations, two

  20. Modelling and Control Design of Unified Power Flow Controller for Various Control Strategies

    Directory of Open Access Journals (Sweden)

    T. Nireekshana

    2010-11-01

    Full Text Available Unified Power Flow Controller (UPFC is used to control the power flow in the transmission systems by controlling the impedance, voltage magnitude and phase angle. This controller offers advantages in terms of static and dynamic operation of the power system. It also brings in new challenges in power electronics and power system design. The basic structure of the UPFC consists of two voltage source inverter (VSI; where one converter is connected in parallel to the transmission line while the other is in series with the transmission line. The aim of the paper is to develop a control strategy for UPFC, modeling UPFC using MATLAB/SIMULINK and to analyze the control strategy to use the series voltage injection and shunt current injection for UPFC control. To simplify the design procedure we carry out the design for the series and shunt branches separately.In each case, a simple equivalent circuit represents the external system. The design has to be validated when the various subsystems are integrated.

  1. 风电直流微网的电压分层协调控制%Hierarchical Coordinated Control of Wind Turbine-based DC Microgrid

    Institute of Scientific and Technical Information of China (English)

    王毅; 张丽荣; 李和明; 刘均鹏

    2013-01-01

    For the microgrid system dominated by new energy power generation, the DC microgrid has become a new microgrid technology with its advantages. Taking a wind turbine-based DC microgrid configuration as an example, different operation modes are described and a three-layer voltage hierarchical coordinated control strategy is proposed. Each power electronic converter coordinates its control method by monitoring the DC voltage variation to keep the power balance of the DC microgrid under different operating conditions. Each unit is controlled independently without communicating with each other, which simplifies the control structure and increases the control flexibility. The proposed control strategy is validated by simulation on a DC microgrid with permanent magnet synchronous generator based wind turbines and energy storage battery. The simulation results show that the converters have the ability to respond quickly to the DC voltage variation caused by the various operating conditions, such as variations of wind speed and loads, AC grid fault, so that the stability and the power supply quality of the DC microgrid system are improved.%对于以新能源发电为主的微网系统,直流微网以其显著优势成为微网技术新的研究方向.该文以风电直流微网为例,在分析直流微网的构成以及各种运行模式的基础上,提出电压分层协调控制策略.该控制策略通过检测直流电压的变化量来协调各电力电子变流器的工作方式,从而确保在不同工况下都能保持微网内的有功功率平衡.各变流器独立工作,无需相互通信,可简化控制系统结构,并使直流微网具备“即插即用”功能.通过对含永磁风电机组、储能蓄电池的直流微网的仿真分析,验证所提控制策略对直流微网的有效控制.在风速或负荷变化、电网故障、蓄电池达到容量限定值等各种工作状态下,各端变流器都能根据直流电压变化量做出快速响应,从而

  2. Application of Newton's optimal power flow in voltage/reactive power control

    Energy Technology Data Exchange (ETDEWEB)

    Bjelogrlic, M.; Babic, B.S. (Electric Power Board of Serbia, Belgrade (YU)); Calovic, M.S. (Dept. of Electrical Engineering, University of Belgrade, Belgrade (YU)); Ristanovic, P. (Institute Nikola Tesla, Belgrade (YU))

    1990-11-01

    This paper considers an application of Newton's optimal power flow to the solution of the secondary voltage/reactive power control in transmission networks. An efficient computer program based on the latest achievements in the sparse matrix/vector techniques has been developed for this purpose. It is characterized by good robustness, accuracy and speed. A combined objective function appropriate for various system load levels with suitable constraints, for treatment of the power system security and economy is also proposed. For the real-time voltage/reactive power control, a suboptimal power flow procedure has been derived by using the reduced set of control variables. This procedure is based on the sensitivity theory applied to the determination of zones for the secondary voltage/reactive power control and corresponding reduced set of regulating sources, whose reactive outputs represent control variables in the optimal power flow program. As a result, the optimal power flow program output becomes a schedule to be used by operators in the process of the real-time voltage/reactive power control in both normal and emergency operating states.

  3. Software-Based Wireless Power Transfer Platform for Various Power Control Experiments

    Directory of Open Access Journals (Sweden)

    Sun-Han Hwang

    2015-07-01

    Full Text Available In this paper, we present the design and evaluation of a software-based wireless power transfer platform that enables the development of a prototype involving various open- and closed-loop power control functions. Our platform is based on a loosely coupled planar wireless power transfer circuit that uses a class-E power amplifier. In conjunction with this circuit, we implement flexible control functions using a National Instruments Data Acquisition (NI DAQ board and algorithms in the MATLAB/Simulink. To verify the effectiveness of our platform, we conduct two types of power-control experiments: a no-load or metal detection using open-loop power control, and an output voltage regulation for different receiver positions using closed-loop power control. The use of the MATLAB/Simulink software as a part of the planar wireless power transfer platform for power control experiments is shown to serve as a useful and inexpensive alternative to conventional hardware-based platforms.

  4. On load flow control in electric power systems

    Energy Technology Data Exchange (ETDEWEB)

    Herbig, Arnim

    2000-01-01

    This dissertation deals with the control of active power flow, or load flow in electric power systems. During the last few years, interest in the possibilities to control the active power flows in transmission systems has increased significantly. There is a number of reasons for this, coming both from the application side - that is, from power system operations - and from the technological side. where advances in power electronics and related technologies have made new system components available. Load flow control is by nature a multi-input multi-output problem, since any change of load flow in one line will be complemented by changes in other lines. Strong cross-coupling between controllable components is to be expected, and the possibility of adverse interactions between these components cannot be rejected straightaway. Interactions with dynamic phenomena in the power system are also a source of concern. Three controllable components are investigated in this thesis, namely the controlled series capacitor (CSC), the phase angle regulator (PAR), and the unified power flow controller (UPFC). Properties and characteristics of these devices axe investigated and discussed. A simple control strategy is proposed. This strategy is then analyzed extensively. Mathematical methods and physical knowledge about the pertinent phenomena are combined, and it is shown that this control strategy can be used for a fairly general class of devices. Computer simulations of the controlled system provide insight into the system behavior in a system of reasonable size. The robustness and stability of the control system are discussed as are its limits. Further, the behavior of the control strategy in a system where the modeling allows for dynamic phenomena are investigated with computer simulations. It is discussed under which circumstances the control action has beneficial or detrimental effect on the system dynamics. Finally, a graphical approach for analyzing the effect of controllers

  5. Power electronic converters modeling and control with case studies

    CERN Document Server

    Bacha, Seddik; Bratcu, Antoneta Iuliana

    2014-01-01

    Modern power electronic converters are involved in a very broad spectrum of applications: switched-mode power supplies, electrical-machine-motion-control, active power filters, distributed power generation, flexible AC transmission systems, renewable energy conversion systems and vehicular technology, among them. Power Electronics Converters Modeling and Control teaches the reader how to analyze and model the behavior of converters and so to improve their design and control. Dealing with a set of confirmed algorithms specifically developed for use with power converters, this text is in two parts: models and control methods. The first is a detailed exposition of the most usual power converter models: ·        switched and averaged models; ·        small/large-signal models; and ·        time/frequency models. The second focuses on three groups of control methods: ·        linear control approaches normally associated with power converters; ·        resonant controllers b...

  6. Hierarchical Robot Control System and Method for Controlling Select Degrees of Freedom of an Object Using Multiple Manipulators

    Science.gov (United States)

    Abdallah, Muhammad E. (Inventor); Platt, Robert (Inventor); Wampler, II, Charles W. (Inventor)

    2013-01-01

    A robotic system includes a robot having manipulators for grasping an object using one of a plurality of grasp types during a primary task, and a controller. The controller controls the manipulators during the primary task using a multiple-task control hierarchy, and automatically parameterizes the internal forces of the system for each grasp type in response to an input signal. The primary task is defined at an object-level of control, e.g., using a closed-chain transformation, such that only select degrees of freedom are commanded for the object. A control system for the robotic system has a host machine and algorithm for controlling the manipulators using the above hierarchy. A method for controlling the system includes receiving and processing the input signal using the host machine, including defining the primary task at the object-level of control, e.g., using a closed-chain definition, and parameterizing the internal forces for each of grasp type.

  7. Controlling Power Consumption for Displays With Backlight Dimming

    DEFF Research Database (Denmark)

    Mantel, Claire; Burini, Nino; Nadernejad, Ehsan

    2013-01-01

    Backlight dimming of Liquid Crystal Displays (LCD) is a technology which aims at saving power and improving visual quality. The evolution of energy standards and the increasing public expectations regarding power consumption have made it necessary for backlight systems to manage their power....... Such a control is challenging to implement, because for LCD displays quality and power are closely interlinked, and one cannot be modified without affecting the other. To address this issue, we present a framework for power controlled backlight dimming defining some key concepts. Two methods to obtain backlights...... with a predefined power level for images are presented: one method has low complexity and the other achieves high performance in terms of quality/power trade-off. Those methods are evaluated on a modeled Light-Emitting Diode edge-lit backlight display. The high-performance method performs significantly better than...

  8. Energy-efficient power control for OFDMA cellular networks

    KAUST Repository

    Sboui, Lokman

    2016-12-24

    In this paper, we study the energy efficiency (EE) of orthogonal frequency-division multiple access (OFDMA) cellular networks. Our objective is to present a power allocation scheme that maximizes the EE of downlink communications. We propose a novel explicit expression of the optimal power allocation to each subcarrier. We also present the power control when the transmit power is limited by power budget constraint or/and minimal rate constraint and we highlight the occurrence of some transmission outage events depending on the constraints\\' parameters. In the numerical results, we show that our proposed power control improves the EE especially at high power budget regime and low minimal rate regime. In addition, we show that having a higher number of subcarriers enhances the OFDMA EE.

  9. Smart — STATCOM control strategy implementation in wind power plants

    DEFF Research Database (Denmark)

    Sintamarean, Nicolae Christian; Cantarellas, Antoni Mir; Miranda, H.;

    2012-01-01

    converters is increasing. This paper deals with an advanced control strategy design of a three-level converter performing STATCOM and Active Filter functionalities. The proposed system is called Smart-STATCOM since it has the capability of self-controlling reactive power and harmonic voltages at the same......High penetration of wind energy into the grid may introduce stability and power quality problems due to the fluctuating nature of the wind and the increasing complexity of the power system. By implementing advanced functionalities in power converters, it is possible to improve the performance...... of the wind farm and also to provide grid support, as it is required by the grid codes. One of the main compliance difficulties that can be found in such power plants are related to reactive power compensation and to keep the harmonics content between the allowed limits, even if the power of the WPP...

  10. Achieving high-powered Zn/air fuel cell through N and S co-doped hierarchically porous carbons with tunable active-sites as oxygen electrocatalysts

    Science.gov (United States)

    Tang, Qiaowei; Wang, Luming; Wu, Mingjie; Xu, Nengneng; Jiang, Lei; Qiao, Jinli

    2017-10-01

    Electrochemical reduction of oxygen is the heart of the next-generation energy technologies to fuel cells and metal-air batteries, of which the reference catalysts suffer from two critical bottlenecks lying in their insufficient electroactivities and unclear active site structures. Herein, we introduce the effectively hierarchically porous carbons (HPCs) as the active-sites enriched platform for oxygen electroreduction. Three quaternized copolymers (PUB, PAADDA and PICP) with different chemical structures are used to pursue Fe/N/S-tailored ORR electrocatalysts. The most efficient one prepared by PAADDA gives the onset potential of 0.94 V and a half-wave potential of 0.85 V in basic solution, as well as superb electroactivities of low H2O2% and high electron transfer number in both alkaline and acidic medium. Surprisingly, they all display high discharge power density as applied to Zn-air fuel cells, and the HPCs-PAADDA catalyst thrillingly reaches 516.3 mW cm-2 when catalyst loading is optimized to 5.0 mg cm-2. The results elucidate that the polymer with long aliphatic chain is propitious to trap metals to create active sites and enwrap silica template to construct uniform pore structure. Only two kinds of nitrogen configuration (pyridinic-N and graphitic-N) are found with distinct structure in these HPCs, which happens to be active sites.

  11. Integrated control of next generation power system

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2010-02-28

    The multi-agent system (MAS) approach has been applied with promising results for enhancing an electric power distribution circuit, such as the Circuit of the Future as developed by Southern California Edison. These next generation power system results include better ability to reconfigure the circuit as well as the increased capability to improve the protection and enhance the reliability of the circuit. There were four main tasks in this project. The specific results for each of these four tasks and their related topics are presented in main sections of this report. Also, there were seven deliverables for this project. The main conclusions for these deliverables are summarized in the identified subtask section of this report. The specific details for each of these deliverables are included in the “Project Deliverables” section at the end of this Final Report.

  12. Testing power system controllers by real-time simulation

    DEFF Research Database (Denmark)

    Venne, Philippe; Guillaud, Xavier; Sirois, Frédéric

    2007-01-01

    In this paper, we present a number of state-of-the art methods for testing power system controllers based on the use of a real-time power system simulator. After introducing Hypersim, we list and discuss the different means of connection between the controller under tests and the power system...... simulator. We then present two applications based on this method. The first one is an agent based controller used to increase the penetration of wind energy in a weak grid, and the second one is the controller of a gas micro turbine connected to the distribution grid....

  13. Digital signal processing in power electronics control circuits

    CERN Document Server

    Sozanski, Krzysztof

    2013-01-01

    Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using

  14. Thermal control system for Space Station Freedom photovoltaic power module

    Science.gov (United States)

    Hacha, Thomas H.; Howard, Laura

    1994-01-01

    The electric power for Space Station Freedom (SSF) is generated by the solar arrays of the photovoltaic power modules (PVM's) and conditioned, controlled, and distributed by a power management and distribution system. The PVM's are located outboard of the alpha gimbals of SSF. A single-phase thermal control system is being developed to provide thermal control of PVM electrical equipment and energy storage batteries. This system uses ammonia as the coolant and a direct-flow deployable radiator. The description and development status of the PVM thermal control system is presented.

  15. Evaluation of Current Controllers for Distributed Power Generation Systems

    DEFF Research Database (Denmark)

    Timbus, Adrian; Liserre, Marco; Teodorescu, Remus

    2009-01-01

    This paper discusses the evaluation of different current controllers employed for grid-connected distributed power generation systems having variable input power, such as wind turbines and photovoltaic systems. The focus is mainly set on linear controllers such as proportional....... First, in steady-state conditions, the contribution of controllers to the total harmonic distortion of the grid current is pursued. Further on, the behavior of controllers in the case of transient conditions like input power variations and grid voltage faults is also examined. Experimental results...

  16. Control architecture of power systems: Modeling of purpose and function

    DEFF Research Database (Denmark)

    Heussen, Kai; Saleem, Arshad; Lind, Morten

    2009-01-01

    for semantically consistent modeling of control architecture is presented. The method, called Multilevel Flow Modeling (MFM), is applied to the case of system balancing. It was found that MFM is capable of capturing implicit control knowledge, which is otherwise difficult to formalize. The method has possible...... of power systems and it is necessary to identify requirements and functions. How does new control architecture fit with the old architecture? How can power system functions be specified independent of technology? What is the purpose of control in power systems? In this paper, a method suitable...

  17. Stability and control of wind farms in power systems

    Energy Technology Data Exchange (ETDEWEB)

    Jauch, C.

    2006-10-15

    The Ph.D. project 'Stability and Control of Wind Farms in Power Systems' deals with some selected problems related to wind power in power systems. With increasing wind power penetration, wind turbines substitute the power production of conventional power plants. Therefore, wind turbines also have to take over the power system stabilisation and control tasks, that were traditionally carried out by conventional power plants. Out of the many aspects related to this problem, this project focuses on transient fault ride-through and power system stabilisation. The selection of turbine types considered in this project is limited to active-stall turbines and variable speed, variable pitch turbines with gearboxes and full-scale converter-connected synchronous generators. As a basis for the project, a study into the state of the art is conducted at the beginning of the project. Grid connection requirements that were in force, or published as drafts, at the time, and scientific literature related to the topic, are studied. The project is based on simulations of wind turbines in a power system simulations tool. Some of the models used in this project were readily available prior to the project; the development of others is part of the project. The most extensive modelling work deals with the design of the electrical part of the variable speed turbine and its controls. To simulate realistic grid operation the wind turbine models are connected to an aggregated model of the Nordic power system. For that purpose the Nordic power system model, which was available prior to the project, is extended with a realistic feeder configuration. It is commonly demanded from modern wind turbines, that they must not disconnect in case of transient faults. Therefore, controllers are designed that enable the two turbine types to ride through transient faults. With these transient fault controllers the wind turbines can stay connected to the grid, such that their generation capacity is

  18. Collaborative Hierarchical Sparse Modeling

    CERN Document Server

    Sprechmann, Pablo; Sapiro, Guillermo; Eldar, Yonina C

    2010-01-01

    Sparse modeling is a powerful framework for data analysis and processing. Traditionally, encoding in this framework is done by solving an l_1-regularized linear regression problem, usually called Lasso. In this work we first combine the sparsity-inducing property of the Lasso model, at the individual feature level, with the block-sparsity property of the group Lasso model, where sparse groups of features are jointly encoded, obtaining a sparsity pattern hierarchically structured. This results in the hierarchical Lasso, which shows important practical modeling advantages. We then extend this approach to the collaborative case, where a set of simultaneously coded signals share the same sparsity pattern at the higher (group) level but not necessarily at the lower one. Signals then share the same active groups, or classes, but not necessarily the same active set. This is very well suited for applications such as source separation. An efficient optimization procedure, which guarantees convergence to the global opt...

  19. Maximum Power Point Tracking and Reactive Power Control of Single Stage Grid Connected Photovoltaic System

    Directory of Open Access Journals (Sweden)

    Y. Hoseynpoor

    2011-12-01

    Full Text Available Single-stage grid-connected Photovoltaic (PV systems have advantages such as simple topology, high efficiency, etc. However, since all the control objectives such as the maximum power point tracking (with the utility voltage, and harmonics reduction for output current need to be considered simultaneously, the complexity of the control scheme is much increased. In this paper a new type of grid connected photovoltaic (PV system with Maximum Power Point Tracking (MPPT and reactive power simultaneous control system is presented. System has two controlling loops to obtain the maximum power from the PV array and also has reactive power control (RPC. In order to decrease the complexity, cost and the number of converters, a singlestage PV system is applied. Using RPC and MPPT controllers, reference current is calculated and the current with low THD (<5% is injected to grid through Adaptive Predictive Current Control (APCC and current Controlled Voltage Source Inverter (CCVSI. The operation of the system is classified in to two day and night modes. In day mode MPPT and RPC control is accomplished and in night mode RPC control is accomplished like STATCOM operation. Reactive power control is continuously performed correctly with appropriate speed in two inductive and capacitive modes in both day and night modes. Thus, System Utilization Factor (SUF increases to 100% which is just 20% for common PV systems. Mathematical modeling of the system and the results of simulations in MATLAB/SIMULINK software are presented to investigate the correctness of the results.

  20. 输电网络的分层分区电压无功调节方法%An Algorithm for Hierarchical and Partitioned Regulation of Voltage and Reactive Power in Transmission Network

    Institute of Scientific and Technical Information of China (English)

    颜伟; 高强; 余娟; 杜跃明

    2011-01-01

    According to the principles of hierarchical and partitioned balance and local compensation of reactive power as well as the principle of contrary regulation of voltage, a method for voltage and reactive power regulation in transmission network is proposed. Firstly, the concepts such as partition in the same hierarchy and its load factor, reactive power regulation ability and unbalancedness degree of reactive power are defined and used to determine ideal targets of reactive power balance and contrary regulation of voltage and to evaluate reactive power balance level. On this basis, a hierarchical and partitioned regulation strategy of voltage and reactive power is put forward, and the regulation strategy consists of three stages: global voltage and reactive power regulation, hierarchical and partitioned regulation of voltage and reactive power and local regulation of voltage and ractive power of teminal substaions. The features of power flow in every single stage are analyzed and the regulation rules of voltage and reactive power in each stage are drafted for the aims of making the voltage of whole network conforming to the guide as well as implementing hierarchical and partitioned reactive power balance as possible. The availability of the proposed algurithm is verified by the results of calculation example.%基于无功的分层分区平衡与就地补偿原则、中枢点电压的逆调压原则,提出了输电网络电压无功调节方法.首先定义了同层区及其负载率、无功调节能力和无功不平衡度等概念,以此来确定无功平衡与逆调压的理想目标,评估电网的无功平衡水平.在此基础上提出了分层分区的电压无功调节策略,该策略包括3个阶段:1)全局电压无功调节;2)无功的分层分区平衡调节;3)终端变电站的局部电压与无功调节.分析了每个阶段的潮流特征,制定了各阶段的电压无功调节规则,尽可能实现全网的电压合格和分层分区的无功平衡.

  1. Growth of self-organized hierarchical ZnO nanoarchitectures by a simple In/In2S3 controlled thermal evaporation process.

    Science.gov (United States)

    Shen, Guozhen; Bando, Yoshio; Lee, Cheol-Jin

    2005-06-02

    Novel hierarchical ZnO nanoarchitectures, such as microtrepangs, microbelts, nanoflowers, nanocombs, nanowheels, and nanofans assembled by ZnO nanocones, nanobowling pins, nanobottles, nanoarrows, and nanonails, have had their growth controlled by the thermal evaporation of Zn and a mixture of In and In2S3. Both the morphologies of the products and their construction units could be efficiently controlled by simple adjustment of the weight ratio of In/In2S3. The phase structure, morphologies, and photoluminescence properties of the ZnO products were investigated by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and photoluminescence spectroscopy. These novel hierarchical ZnO nanoarchitectures may be attractive building blocks for creating optical or other nanodevices.

  2. CDMA Closed-loop Power Control in the Presence of Narrowband Interference

    Institute of Scientific and Technical Information of China (English)

    YU Ai; WANG Jiangzhou

    2001-01-01

    Power control is an important issue in the DS-CDMA communication systems. This paper investigates the power control error of a closedloop power controlled CDMA system in the presence of narrowband interference. By use of a simplified loglinear power control model, the power control error,based on a strength-based power control algorithm, is studied in the overlay situation.

  3. Onboard hierarchical network

    Science.gov (United States)

    Tunesi, Luca; Armbruster, Philippe

    2004-02-01

    The objective of this paper is to demonstrate a suitable hierarchical networking solution to improve capabilities and performances of space systems, with significant recurrent costs saving and more efficient design & manufacturing flows. Classically, a satellite can be split in two functional sub-systems: the platform and the payload complement. The platform is in charge of providing power, attitude & orbit control and up/down-link services, whereas the payload represents the scientific and/or operational instruments/transponders and embodies the objectives of the mission. One major possibility to improve the performance of payloads, by limiting the data return to pertinent information, is to process data on board thanks to a proper implementation of the payload data system. In this way, it is possible to share non-recurring development costs by exploiting a system that can be adopted by the majority of space missions. It is believed that the Modular and Scalable Payload Data System, under development by ESA, provides a suitable solution to fulfil a large range of future mission requirements. The backbone of the system is the standardised high data rate SpaceWire network http://www.ecss.nl/. As complement, a lower speed command and control bus connecting peripherals is required. For instance, at instrument level, there is a need for a "local" low complexity bus, which gives the possibility to command and control sensors and actuators. Moreover, most of the connections at sub-system level are related to discrete signals management or simple telemetry acquisitions, which can easily and efficiently be handled by a local bus. An on-board hierarchical network can therefore be defined by interconnecting high-speed links and local buses. Additionally, it is worth stressing another important aspect of the design process: Agencies and ESA in particular are frequently confronted with a big consortium of geographically spread companies located in different countries, each one

  4. Real Time & Power Efficient Adaptive - Robust Control

    Science.gov (United States)

    Ioan Gliga, Lavinius; Constantin Mihai, Cosmin; Lupu, Ciprian; Popescu, Dumitru

    2017-01-01

    A design procedure for a control system suited for dynamic variable processes is presented in this paper. The proposed adaptive - robust control strategy considers both adaptive control advantages and robust control benefits. It estimates the degradation of the system’s performances due to the dynamic variation in the process and it then utilizes it to determine when the system must be adapted with a redesign of the robust controller. A single integral criterion is used for the identification of the process, and for the design of the control algorithm, which is expressed in direct form, through a cost function defined in the space of the parameters of both the process and the controller. For the minimization of this nonlinear function, an adequate mathematical programming minimization method is used. The theoretical approach presented in this paper was validated for a closed loop control system, simulated in an application developed in C. Because of the reduced number of operations, this method is suitable for implementation on fast processes. Due to its effectiveness, it increases the idle time of the CPU, thereby saving electrical energy.

  5. An Approach to Autonomous Control for Space Nuclear Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Wood, Richard Thomas [ORNL; Upadhyaya, Belle R. [University of Tennessee, Knoxville (UTK)

    2011-01-01

    Under Project Prometheus, the National Aeronautics and Space Administration (NASA) investigated deep space missions that would utilize space nuclear power systems (SNPSs) to provide energy for propulsion and spacecraft power. The initial study involved the Jupiter Icy Moons Orbiter (JIMO), which was proposed to conduct in-depth studies of three Jovian moons. Current radioisotope thermoelectric generator (RTG) and solar power systems cannot meet expected mission power demands, which include propulsion, scientific instrument packages, and communications. Historically, RTGs have provided long-lived, highly reliable, low-power-level systems. Solar power systems can provide much greater levels of power, but power density levels decrease dramatically at {approx} 1.5 astronomical units (AU) and beyond. Alternatively, an SNPS can supply high-sustained power for space applications that is both reliable and mass efficient. Terrestrial nuclear reactors employ varying degrees of human control and decision-making for operations and benefit from periodic human interaction for maintenance. In contrast, the control system of an SNPS must be able to provide continuous operatio for the mission duration with limited immediate human interaction and no opportunity for hardware maintenance or sensor calibration. In effect, the SNPS control system must be able to independently operate the power plant while maintaining power production even when subject to off-normal events and component failure. This capability is critical because it will not be possible to rely upon continuous, immediate human interaction for control due to communications delays and periods of planetary occlusion. In addition, uncertainties, rare events, and component degradation combine with the aforementioned inaccessibility and unattended operation to pose unique challenges that an SNPS control system must accommodate. Autonomous control is needed to address these challenges and optimize the reactor control design.

  6. Active Power Control of Waked Wind Farms: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Fleming, Paul A [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-15

    Active power control can be used to balance the total power generated by wind farms with the power consumed on the electricity grid. With the increasing penetration levels of wind energy, there is an increasing need for this ancillary service. In this paper, we show that the tracking of a certain power reference signal provided by the transmission system operator can be significantly improved by using feedback control at the wind farm level. We propose a simple feedback control law that significantly improves the tracking behavior of the total power output of the farm, resulting in higher performance scores. The effectiveness of the proposed feedback controller is demonstrated using high-fidelity computational fluid dynamics simulations of a small wind farm.

  7. Robust Power Management Control for Stand-Alone Hybrid Power Generation System

    Science.gov (United States)

    Kamal, Elkhatib; Adouane, Lounis; Aitouche, Abdel; Mohammed, Walaa

    2017-01-01

    This paper presents a new robust fuzzy control of energy management strategy for the stand-alone hybrid power systems. It consists of two levels named centralized fuzzy supervisory control which generates the power references for each decentralized robust fuzzy control. Hybrid power systems comprises: a photovoltaic panel and wind turbine as renewable sources, a micro turbine generator and a battery storage system. The proposed control strategy is able to satisfy the load requirements based on a fuzzy supervisor controller and manage power flows between the different energy sources and the storage unit by respecting the state of charge and the variation of wind speed and irradiance. Centralized controller is designed based on If-Then fuzzy rules to manage and optimize the hybrid power system production by generating the reference power for photovoltaic panel and wind turbine. Decentralized controller is based on the Takagi-Sugeno fuzzy model and permits us to stabilize each photovoltaic panel and wind turbine in presence of disturbances and parametric uncertainties and to optimize the tracking reference which is given by the centralized controller level. The sufficient conditions stability are formulated in the format of linear matrix inequalities using the Lyapunov stability theory. The effectiveness of the proposed Strategy is finally demonstrated through a SAHPS (stand-alone hybrid power systems) to illustrate the effectiveness of the overall proposed method.

  8. Nuclear electric power safety, operation, and control aspects

    CERN Document Server

    Knowles, J Brian

    2013-01-01

    Assesses the engineering of renewable sources for commercial power generation and discusses the safety, operation, and control aspects of nuclear electric power From an expert who advised the European Commission and UK government in the aftermath of Three Mile Island and Chernobyl comes a book that contains experienced engineering assessments of the options for replacing the existing, aged, fossil-fired power stations with renewable, gas-fired, or nuclear plants. From geothermal, solar, and wind to tidal and hydro generation, Nuclear Electric Power: Safety, Operation, and Control Aspects ass

  9. Decomposing Objectives and Functions in Power System Operation and Control

    DEFF Research Database (Denmark)

    Heussen, Kai; Lind, Morten

    2009-01-01

    mix of challenges posed by renewable energy sources, demand response technologies and smartgrid concepts, affecting all areas of power system operation. Both, new control modes and changes in market design are required. This paper presents a mean-ends perspective to the analysis of the control...... way. Finally, the discussion is opened up toward a formalization of service-exchange between market participants.......The introduction of many new energy solutions requires the adaptation of classical operation paradigms in power systems. In the standard paradigm, a power system is some equivalent of a synchronous generators, a power line and an uncontrollable load. This paradigm has been challenged by a diverse...

  10. Analyzing the dynamic stability of controlled electric power systems

    Energy Technology Data Exchange (ETDEWEB)

    Nikolaeva, S.I.

    1983-01-01

    Techniques from the theory of optimal control are used to consider the possibilities for evaluating the effectiveness of emergency control of turbines at power plants of complex electric power systems. An algorithm is given for calculating the optimal control functions; it has been developed on the basis of the Pontryagin principle of the maximum and the method of quasi-linearization. Calculations for a particular four-machine circuit are used to evaluate the factors affecting the computational effectiveness of the algorithm.

  11. Neuro-fuzzy based Controller for Solving Active Power Filter

    Directory of Open Access Journals (Sweden)

    Homayoun Ebrahimian

    2016-03-01

    Full Text Available In this paper, two soft computing techniques by fuzzy logic, neural network are used to design alternative control schemes for switching the APF active power filter (APF. The control of a shunt active power filter designed for harmonic and reactive current mitigation. Application of the mentioned model has been combined by an intelligent algorithm for improving the efficiency of proposed controller. Effectiveness of the proposed method has been applied over test case and shows the validity of proposed model.

  12. Power system integration and control of variable speed wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Eek, Jarle

    2009-12-15

    A wind power plant is a highly dynamic system that dependent on the type of technology requires a number of automatic control loops. This research deals with modelling, control and analysis related to power system integration of variable speed, pitch controlled wind turbines. All turbine components have been modelled and implemented in the power system simulation program SIMPOW, and a description of the modelling approach for each component is given. The level of model detail relates to the classical modelling of power system components for power system stability studies, where low frequency oscillations are of special importance. The wind turbine model includes a simplified representation of the developed rotor torque and the thrust force based on C{sub p-} and C{sub t} characteristic curves. The mechanical system model represents the fundamental torsional mode and the first mode of blades and tower movements. Two generator technologies have been investigated. The doubly fed induction generator (DFIG) and the stator converter interfaced permanent magnet synchronous generator (PMSG). A simplified model of a 2 level voltage source converter is used for both machine types. The generator converter controllers have been given special attention. All model components are linearized for the purpose of control system design and power system interaction related to small signal stability analysis. Different control strategies discussed in the literature have been investigated with regard to power system interaction aspects. All control parameters are identified using the internal model control approach. The analysis is focused on three main areas: 1. Identification of low damped oscillatory modes. This is carried out by the establishment and discussion of wind turbine modelling. 2. Interaction between control loops. A systematic approach is presented in order to analyse the influence of control loops used in variable speed wind turbines. 3.Impact on power system performance

  13. Frequency Control for Island Operation of Bornholm Power System

    DEFF Research Database (Denmark)

    Cha, Seung-Tae; Wu, Qiuwei; Zhao, Haoran;

    2014-01-01

    This paper presents a coordinated control strategy of a battery energy storage system (BESS) and distributed generation (DG) units for the island operation of the Danish island of Bornholm. The Bornholm power system is able to transit from the grid connected operation with the Nordic power system...... the primary frequency control and the DG units are used to provide the secondary frequency control. As such, the proposed control scheme can strike a balance of the frequency control speed and the energy used from the BESS for the frequency control support. The real-time model of the Bornholm power system...... to the isolated island operation. In order to ensure the secure island operation, the coordinated control of the BESS and the DG has been proposed to stabilize the frequency of the system after the transition to the island operation. In the proposed coordinate control scheme, the BESS is used to provide...

  14. A particle-swarm-based approach of power system stability enhancement with unified power flow controller

    Energy Technology Data Exchange (ETDEWEB)

    Al-Awami, Ali T.; Abido, M.A. [Electrical Engineering Department, King Fahd University of Petroleum and Minerals, Dhahran 31261, Box 784 (Saudi Arabia); Abdel-Magid, Y.L. [Electrical Engineering Program, The Petroleum Institute, P.O. Box 2533, Abu Dhabi (United Arab Emirates)

    2007-03-15

    The use of the supplementary controllers of a unified power flow controller (UPFC) to damp low frequency oscillations in a weakly connected system is investigated. The potential of the UPFC supplementary controllers to enhance the dynamic stability is evaluated by measuring the electromechanical controllability through singular value decomposition (SVD) analysis. Individual designs of the UPFC controllers and power system stabilizer (PSS) using particle-swarm optimization (PSO) technique are discussed. The effectiveness of the proposed controllers on damping low frequency oscillations is tested through eigenvalue analysis and non-linear time simulation. (author)

  15. Electrical power distribution control methods, electrical energy demand monitoring methods, and power management devices

    Science.gov (United States)

    Chassin, David P.; Donnelly, Matthew K.; Dagle, Jeffery E.

    2006-12-12

    Electrical power distribution control methods, electrical energy demand monitoring methods, and power management devices are described. In one aspect, an electrical power distribution control method includes providing electrical energy from an electrical power distribution system, applying the electrical energy to a load, providing a plurality of different values for a threshold at a plurality of moments in time and corresponding to an electrical characteristic of the electrical energy, and adjusting an amount of the electrical energy applied to the load responsive to an electrical characteristic of the electrical energy triggering one of the values of the threshold at the respective moment in time.

  16. Optimization Algorithms for Nuclear Reactor Power Control

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yeong Min; Oh, Won Jong; Oh, Seung Jin; Chun, Won Gee; Lee, Yoon Joon [Jeju National University, Jeju (Korea, Republic of)

    2010-10-15

    One of the control techniques that could replace the present conventional PID controllers in nuclear plants is the linear quadratic regulator (LQR) method. The most attractive feature of the LQR method is that it can provide the systematic environments for the control design. However, the LQR approach heavily depends on the selection of cost function and the determination of the suitable weighting matrices of cost function is not an easy task, particularly when the system order is high. The purpose of this paper is to develop an efficient and reliable algorithm that could optimize the weighting matrices of the LQR system

  17. Study and Effects of UPFC and its Control System for Power Flow Control and Voltage Injection in a Power System

    Directory of Open Access Journals (Sweden)

    Vibhor Gupta

    2010-07-01

    Full Text Available The maintenance and reliability of the power system has become a major aspect of study. The encouragement to the construction of HV lines, the amount of power transmission/km on HV line and the amount of power transaction as seen from economic side is much responsible for concern towards congestion in power system. The solution is the use of FACTS devices especially the use of UPFC. In this paper the study of UPFC with its various modes of operation is understood. Second, the operation of control system used in its converters is also studied. Finally by help of modeling of a power system in ATLAB, and by installing UPFC in transmission link, its use as power flow controller and voltage injection is seen. Conclusion is made ondifferent results to see the benefit of UPFC in power system.

  18. Power control for wind turbines in weak grids: Concepts development

    Energy Technology Data Exchange (ETDEWEB)

    Bindner, Henrik

    1999-03-01

    Presently, high wind potentials in remote areas may not be utilized for electricity production due to limited grid transmission capacity and/or difficulties in matching the electricity production with the demand. The overall project objective is to help overcome these bottlenecks, i.e. to identify and analyze methods and technologies for making it viable to utilize more of the wind potential in remote areas. The suggestion is to develop a power control concept for wind turbines which will even out the power fluctuations and make it possible to increase the wind energy penetration. The main options are to combine wind power with a pumped hydro power storage or with an AC/DC converter and battery storage. The AC/DC converter can either be an `add-on` type or it can be designed as an integrated part of a variable speed wind turbine. The idea is that combining wind power with the power control concept will make wind power more firm and possible to connect to weaker grids. So, when the concept is matured, the expectation is that for certain wind power installations, the cost of the power control is paid back as added wind power capacity value and saved grid reinforcement costs. Different systems for controlling the power output from a wind farm connected to a weak grid have been investigated. The investigation includes development of different control strategies, use of different storage types, development of a framework for comparing different options and tools needed as part of the framework. The main issues in the assessment of the power control concept are the storage capacity and power rating compared to the installed wind power capacity. The model SimStore has been developed to assess that. The economic investigations have shown that for small systems where only small amounts of wind energy would otherwise have been dumped add-on PQ-controllers with battery storage can be the least cost option compared to grid reinforcement and dumping of energy. For larger

  19. UPFC control parameter identification for effective power oscillation damping

    Energy Technology Data Exchange (ETDEWEB)

    Pandey, R.K.; Singh, N.K. [Dept. of Electrical Engineering, Institute of Technology, Banaras Hindu University, Varanasi, UP 22100 (India)

    2009-07-15

    This paper presents UPFC control parameter identification for effective power oscillation damping (POD). A comparative analysis with minimum singular value (MSV), Hankel singular value (HSV), direct component of torque (DCT) and residue has been proposed for finding the most appropriate control input parameters of unified power flow controller (UPFC) for damping power system oscillations. The basic objective of the paper is to identify the control parameters of UPFC in order to provide adequate damping in power network with changing system conditions. The results presented in this paper are studied widely on single machine infinite bus. The test has also been carried for two area systems and same trend has been observed. The results show the suitability of this approach in identification of UPFC control parameters. (author)

  20. The New Modular Control System for Power Converters at CERN

    CERN Document Server

    Di Cosmo, Matteo

    2015-01-01

    The CERN accelerator complex consists of several generations of particle accelerators, with around 5000 power converters supplying regulated current and voltage to normal and superconducting magnet circuits. Today around 12 generations of converter control platforms can be found in the accelerator complex, ranging in age and technology. The diversity of these platforms has a significant impact on operability, maintenance and support of power converters. Over the past few years a new generation of modular controls called RegFGC3 has been developed by CERN’s power conversion group, with a goal to provide a standardised control platform, supporting a wide variety of converter topologies. The aim of this project is to reduce maintenance costs by decreasing the variety and diversity of control systems whilst simultaneously improving the operability and reliability of power converters and their controls. This paper describes the state of the on-going design and realization of the RegFGC3 platform, focusing on fun...