Sample records for hf automatic link

  1. Integrated magnetics design for HF-link power converters

    DEFF Research Database (Denmark)

    Ljusev, Petar; Andersen, Michael Andreas E.


    This paper deals with the design of integrated magnetics for HF-link converters, where the integrated magnetic components do not necessarily belong to the same voltage loop. Depending on the specific HF-link converter topology, the proposed integrated magnetics can either alleviate the derivation...... of independent auxiliary supply voltages from the main transformer or integrate other magnetic structures, thus saving board space and cutting costs....

  2. Integrated magnetics design for HF-link power converters

    Energy Technology Data Exchange (ETDEWEB)

    Ljusev, P.; Andersen, Michael A.E.


    This paper deals with the design of integrated magnetics for HF-link converters, where the two integrated magnetic components on the same core do not necessarily belong to the same voltage loop. Depending on the specific HF-link converter topology, the proposed integrated magnetics can either alleviate the derivation of independent auxiliary supply voltages from the main transformer or integrate other magnetic structures, thus saving board space and cutting costs. (au)

  3. New active load voltage clamp for HF-link converters

    Energy Technology Data Exchange (ETDEWEB)

    Ljusev, P.; Andersen, M.A.E.


    This paper proposes a new active clamp for HF-link converters, which features very high efficiency by returning the clamped energy back to the primary side through a small auxiliary converter. It also increases the reliability of HF-link converters by providing an alternative load current path during malfunctions of the secondary bidirectional bridge. The feasibility of the approach is shown on audio power amplifier prototype. New integrated magnetics design is presented that incorporates both the main power and auxiliary transformer on the same magnetic core. (au)

  4. New active load voltage clamp for HF-link converters

    DEFF Research Database (Denmark)

    Ljusev, Petar; Andersen, Michael Andreas E.


    This paper proposes a new active clamp for HF-link converters, which features very high efficiency by returning the clamped energy back to the primary side through a small auxiliary converter. It also increases the reliability of HF-link converters by providing an alternative load current path du...... during malfunctions of the secondary bidirectional bridge. The feasibility of the approach is shown on audio power amplifier prototype. New integrated magnetics design is presented that incorporates both the main power and auxiliary transformer on the same magnetic core....

  5. New PWM method and commutation strategy for HF-link converters for fuel cells and photovoltaics

    DEFF Research Database (Denmark)

    Ljusev, Petar; Andersen, Michael Andreas E.


    This paper presents a new PWM method and commutation strategy for HF-link converters, which leads to safe commutation of the load current in the output bidirectional bridge. The proposed implementation is independent of the particular HF-link converter topology and bidirectional switch selection...

  6. Automatic Meal Inspection System Using LBP-HF Feature for Central Kitchen

    Directory of Open Access Journals (Sweden)

    Yue-Min Jiang


    Full Text Available This paper proposes an intelligent and automatic meal inspection system which can be applied to the meal inspection for the application of central kitchen automation. The diet specifically designed for the patients are required with providing personalized diet such as low sodium intake or some necessary food. Hence, the proposed system can benefit the inspection process that is often performed manually. In the proposed system, firstly, the meal box can be detected and located automatically with the vision-based method and then all the food ingredients can be identified by using the color and LBP-HF texture features. Secondly, the quantity for each of food ingredient is estimated by using the image depth information. The experimental results show that the meal inspection accuracy can approach 80%, meal inspection efficiency can reach1200ms, and the food quantity accuracy is about 90%. The proposed system is expected to increase the capacity of meal supply over 50% and be helpful to the dietician in the hospital for saving the time in the diet inspection process.

  7. A novel three-phase UPS system with a single-phase resonant HF link


    Darwish, MK


    This paper presents a new three-phase uninterruptible power supply (UPS) system based on a single-phase resonant high frequency (HF) link and a single-phase transformer. The three-phase output voltage is constructed and regulated from a three-phase cycloconverter fed from the constant amplitude, constant frequency link voltage. The generation of a novel switching stategy for the three-phase cycloconverter is presented. The simulation of the proposed system is carried out and verified with exp...

  8. Antenna selection in a SIMO architecture for HF radio links (United States)

    Erhel, Yvon; Lemur, Dominique; Oger, Martial; Le Masson, Jérôme


    This work takes place in the global design of a SIMO architecture (single input multiple output) for transhorizon radio links, aiming at a significant increase in the data rate when compared with standard modems based in general on a SISO scheme (single input single output). The project is subject to available space constraints at the receive end, involving mobile stations or onboard implementation. We consider solutions that appear as extensions of the compact and heterogeneous antenna array that we proposed previously: collocated antennas of different types are set up with the same phase center and present diversity in their polarization sensitivities to make array processing effective. Given the number NC of receive channels, we address the problem of selecting the most effective antennas in a set of NA possible candidates including monopoles, dipoles, loop antennas with various geometries, and orientations. The criterion to be maximized is the SIMO outage capacity, a quantity based on the statistical distribution of the SIMO Shannon capacity estimated for a large number of ionospheric channel realizations, each of them being quantified by its channel impulse response including the receive antenna directional responses. Results are presented in the context of a 1 × 2 SIMO structure: the identification of the two most effective antennas in a set of NA = 15 sensors indicates that the optimal structures involve two orthogonal horizontal dipoles or two vertical orthogonal loop antennas. In these conditions, the outage capacity reaches up to 2.23 bps/Hz, a value that significantly exceeds the performances of standard modems.

  9. A Brief Investigation of Adaptive Decision Feedback Equalization for Digital HF Links Employing PSK (Phase Shift Keying) Modulation. (United States)



  10. Polarization diversity in a long-haul transequatorial HF link from Antarctica to Spain (United States)

    Bergadà, Pau; Alsina-Pagès, Rosa Ma; Hervás, Marcos


    This paper describes a set of experiments which examine the feasibility of applying polarization diversity to a 12,760 km ionospheric link from Livingston Island (62.6°S, 60.4°W), South Shetlands, to Cambrils (41.0°N, 1.0°E), Spain. A transmitting monopole and both a monopole and a dipole (inverted-V) at reception are the antennas used in this measurement campaign. Receiving antennas are orthogonal polarized to check whether wave polarization rotation causes differences between simultaneous signals. The results gathered in the paper indicate that there is a marked difference between simultaneous signals at vertical and horizontal polarized antennas, which depends on the hour of the day and the signal frequency. In this low-throughput HF data link, polarization diversity could be used to increase SNR and performance through smart combination of receiving signals, due to the low cross-correlation factor between them.

  11. Physical Layer Definition for a Long-Haul HF Antarctica to Spain Radio Link

    Directory of Open Access Journals (Sweden)

    Rosa Ma Alsina-Pagès


    Full Text Available La Salle and the Observatori de l’Ebre (OE have been involved in a remote sensing project in Antarctica for the last 11 years. The OE has been monitoring the geomagnetic activity for more than twenty years and also the ionospheric activity of the last ten years in the Spanish Antarctic Station Juan Carlos I (ASJI (62.7 ° S, 299.6 ° E. La Salle is finishing the design and testing of a low-power communication system between the ASJI and Cambrils (41.0 ° N, 1.0 ° E with a double goal: (i the transmission of data from the sensors located at the ASJI and (ii the performance of an oblique ionospheric sounding of a 12,760 km HF link. Previously, La Salle has already performed sounding and modulation tests to describe the channel performance in terms of availability, Signal-to-Noise Ratio (SNR, Doppler spread and delay spread. This paper closes the design of the physical layer, by means of the channel error study and the synchronization performance, and concludes with a new physical layer proposal for the Oblique Ionosphere Sounder. Narrowband and wideband frames have been defined to be used when the oblique sounder performs as an ionospheric sensor. Finally, two transmission modes have been defined for the modem performance: the High Robustness Mode (HRM for low SNR hours and the High Throughput Mode (HTM for the high SNR hours.

  12. The AMIDA automatic content linking device: Just-in-time document retrieval in meetings

    NARCIS (Netherlands)

    Popescu-Belis, A.; Boertjes, E.M.; Kilgour, J.; Poller, P.; Castronovo, S.; Wilson, T.; Jaimes, A.; Carletta, J.


    The AMIDA Automatic Content Linking Device (ACLD) is a just-in-time document retrieval system for meeting environments. The ACLD listens to a meeting and displays information about the documents from the group's history that are most relevant to what is being said. Participants can view an outline

  13. The Effectiveness of Weights and Links in Automatic Indexing. Project MEDICO Second Progress Report. (United States)

    Artandi, Susan; Wolf, Edward H.

    This report describes work concerned with the statistical evaluation of the output of MEDICO automatic indexing procedure. The statistical tests were designed to examine the validity of the assumptions which formed the bases of the indexing algorithms with primary emphasis on the algorithm development for the computation of weights and links. Some…

  14. Automatic Generation Control in Multi Area Interconnected Power System by using HVDC Links

    Directory of Open Access Journals (Sweden)

    Yogendra Arya


    Full Text Available This paper investigates the effects of HVDC link in parallel with HVAC link on automatic generation control (AGC problem for a multi-area power system taking into consideration system parameter variations. A fuzzy logic controller is proposed for four area power system interconnected via parallel HVAC/HVDC transmission link which is also referred as asynchronous tie-lines. The linear model of HVAC/HVDC link is developed and the system responses to sudden load change are studied. The simulation studies are carried out for a four area interconnected thermal power system. Suitable solution for automatic generation control problem of four area electrical power system is obtained by means of improving the dynamic performance of power system under study. Robustness of controller is also checked by varying parameters. Simulation results indicate that the scheme works well. The dynamic analyses have been done with and without HVDC link using fuzzy logic controller in Matlab-Simulink. Further a comparison between the two is presented and it has been shown that the performance of the proposed scheme is superior in terms of overshoot and settling time.

  15. The missing link in the mystery of normal automaticity of cardiac pacemaker cells. (United States)

    Lakatta, Edward G; Vinogradova, Tatiana M; Maltsev, Victor A


    Earlier studies of the initiating event of normal automaticity of the heart's pacemaker cells, inspired by classical quantitative membrane theory, focused upon ion currents (IK, I f) that determine the maximum diastolic potential and the early phase of the spontaneous diastolic depolarization (DD). These early DD events are caused by the prior action potential (AP) and essentially reflect a membrane recovery process. Events following the recovery process that ignite APs have not been recognized and remained a mystery until recently. These critical events are linked to rhythmic intracellular signals initiated by Ca2+ clock (i.e., sarcoplasmic reticulum [SR] cycling Ca2+). Sinoatrial cells, regardless of size, exhibit intense ryanodine receptor (RyR), Na+/Ca2+ exchange (NCX)-1, and SR Ca2+ ATPase-2 immunolabeling and dense submembrane NCX/RyR colocalization; Ca2+ clocks generate spontaneous stochastic but roughly periodic local subsarcolemmal Ca2+ releases (LCR). LCRs generate inward currents via NCX that exponentially accelerate the late DD. The timing and amplitude of LCR/I NCX-coupled events control the timing and amplitude of the nonlinear terminal DD and therefore ultimately control the chronotropic state by determining the timing of the I CaL activation that initiates the next AP. LCR period is precisely controlled by the kinetics of SR Ca2+ cycling, which, in turn, are regulated by 1) the status of protein kinase A-dependent phosphorylation of SR Ca2+ cycling proteins; and 2) membrane ion channels ensuring the Ca2+ homeostasis and therefore the Ca2+ available to Ca2+ clock. Thus, the link between early DD and next AP, missed in earlier studies, is ensured by a precisely physiologically regulated Ca2+ clock within pacemaker cells that integrates multiple Ca2+-dependent functions and rhythmically ignites APs during late DD via LCRs-I NCX coupling.

  16. Design of Automatic Production Line for HF Welding Light Gauge H-beam%高频焊接轻型H型钢自动化生产线的设计

    Institute of Scientific and Technical Information of China (English)

    李冬林; 游颖; 李欢


    The automatic production line for high-frequency welding H-beam was designed, which was applied to produce the H-beam of the web plate with the height less than 100 mm. The technological process for the whole production line -was framed, and the designs were conducted by dividing the production line into pre-welding processing, HF welding and post-welding processing. The software SolidWorks was applied to design the virtual prototype and to simulate the motion of mechanisms on production line. The closed-loop control system composed of PLC was applied to control automatic running of the production line.%设计腹板高度不大于100 mm的高频焊接H型钢自动化生产线.制定了整个生产线的工艺流程,将生产线分为焊接前的准备、高频焊接、焊后的处理等过程;采用SolidWorks软件从零件的特征建模到机构的虚拟装配进行了虚拟样机设计,对机构和整条生产线进行了运动仿真;采用PLC控制器组成闭环控制系统,控制整条生产线的自动运行.

  17. High-speed free-space quantum key distribution with automatic tracking for short-distance urban links

    CERN Document Server

    Carrasco-Casado, Alberto; Denisenko, Natalia; Fernandez, Veronica


    High-speed free-space quantum key distribution located in urban environment offers an interesting alternative to public key encryption - whose security strength is yet to be mathematically proven. To achieve this, three main objectives need to be accomplished: both the emitter and receiver have to be capable of transmitting and receiving at high speed - with the selection of the source's wavelength and detectors being of especial importance - the error rate needs to be kept at a minimum, especially that due to solar background radiation; and finally, a fast automatic tracking system, capable of compensating for atmospheric turbulence effects, is needed. Regarding to sky background and atmospheric turbulence, two different tracking techniques involving the beam wander compensation in the emitter or the receiver are presented and one of them is selected for our system, based on the link propagation distance and the atmospheric turbulence regime.

  18. The Link Between Morphology and Structure of Brightest Cluster Galaxies: Automatic Identification of cDs

    CERN Document Server

    Zhao, Dongyao; Conselice, Christopher J


    We study a large sample of 625 low-redshift brightest cluster galaxies (BCGs) and link their morphologies to their structural properties. We derive visual morphologies and find that ~57% of the BCGs are cD galaxies, ~13% are ellipticals, and ~21% belong to the intermediate classes mostly between E and cD. There is a continuous distribution in the properties of the BCG's envelopes, ranging from undetected (E class) to clearly detected (cD class), with intermediate classes (E/cD and cD/E) showing the increasing degrees of the envelope presence. A minority (~7%) of BCGs have disk morphologies, with spirals and S0s in similar proportions, and the rest (~2%) are mergers. After carefully fitting the galaxies light distributions by using one-component (Sersic) and two-component (Sersic+Exponential) models, we find a clear link between the BCGs morphologies and their structures and conclude that a combination of the best-fit parameters derived from the fits can be used to separate cD galaxies from non-cD BCGs. In par...

  19. Linking DICOM pixel data with radiology reports using automatic semantic annotation (United States)

    Pathak, Sayan D.; Kim, Woojin; Munasinghe, Indeera; Criminisi, Antonio; White, Steve; Siddiqui, Khan


    Improved access to DICOM studies to both physicians and patients is changing the ways medical imaging studies are visualized and interpreted beyond the confines of radiologists' PACS workstations. While radiologists are trained for viewing and image interpretation, a non-radiologist physician relies on the radiologists' reports. Consequently, patients historically have been typically informed about their imaging findings via oral communication with their physicians, even though clinical studies have shown that patients respond to physician's advice significantly better when the individual patients are shown their own actual data. Our previous work on automated semantic annotation of DICOM Computed Tomography (CT) images allows us to further link radiology report with the corresponding images, enabling us to bridge the gap between image data with the human interpreted textual description of the corresponding imaging studies. The mapping of radiology text is facilitated by natural language processing (NLP) based search application. When combined with our automated semantic annotation of images, it enables navigation in large DICOM studies by clicking hyperlinked text in the radiology reports. An added advantage of using semantic annotation is the ability to render the organs to their default window level setting thus eliminating another barrier to image sharing and distribution. We believe such approaches would potentially enable the consumer to have access to their imaging data and navigate them in an informed manner.

  20. Going to the gym or to the movies?: situated decisions as a functional link connecting automatic and reflective evaluations of exercise with exercising behavior. (United States)

    Brand, Ralf; Schweizer, Geoffrey


    The goal of the present paper is to propose a model for the study of automatic cognition and affect in exercise. We have chosen a dual-system approach to social information processing to investigate the hypothesis that situated decisions between behavioral alternatives form a functional link between automatic and reflective evaluations and the time spent on exercise. A new questionnaire is introduced to operationalize this link. A reaction-time-based evaluative priming task was used to test participants' automatic evaluations. Affective and cognitive reflective evaluations, as well as exercising time, were requested via self-report. Path analyses suggest that the affective reflective (beta = .71) and the automatic evaluation (beta = .15) independently explain situated decisions, which, in turn (beta = .60) explain time spent on exercise. Our findings highlight the concept of contextualized decisions. They can serve as a starting point from which the so far seldom investigations of automatic cognition and affect in exercise can be integrated with multitudinous results from studies on reflective psychological determinants of health behavior.

  1. Linking attentional processes and conceptual problem solving: Visual cues facilitate the automaticity of extracting relevant information from diagrams

    Directory of Open Access Journals (Sweden)

    Amy eRouinfar


    Full Text Available This study investigated links between lower-level visual attention processes and higher-level problem solving. This was done by overlaying visual cues on conceptual physics problem diagrams to direct participants’ attention to relevant areas to facilitate problem solving. Participants (N = 80 individually worked through four problem sets, each containing a diagram, while their eye movements were recorded. Each diagram contained regions that were relevant to solving the problem correctly and separate regions related to common incorrect responses. Problem sets contained an initial problem, six isomorphic training problems, and a transfer problem. The cued condition saw visual cues overlaid on the training problems. Participants’ verbal responses were used to determine their accuracy. The study produced two major findings. First, short duration visual cues can improve problem solving performance on a variety of insight physics problems, including transfer problems not sharing the surface features of the training problems, but instead sharing the underlying solution path. Thus, visual cues can facilitate re-representing a problem and overcoming impasse, enabling a correct solution. Importantly, these cueing effects on problem solving did not involve the solvers’ attention necessarily embodying the solution to the problem. Instead, the cueing effects were caused by solvers attending to and integrating relevant information in the problems into a solution path. Second, these short duration visual cues when administered repeatedly over multiple training problems resulted in participants becoming more efficient at extracting the relevant information on the transfer problem, showing that such cues can improve the automaticity with which solvers extract relevant information from a problem. Both of these results converge on the conclusion that lower-order visual processes driven by attentional cues can influence higher-order cognitive processes

  2. Linking automatic evaluation to mood and information processing style: consequences for experienced affect, impression formation, and stereotyping. (United States)

    Chartrand, Tanya L; van Baaren, Rick B; Bargh, John A


    According to the feelings-as-information account, a person's mood state signals to him or her the valence of the current environment (N. Schwarz & G. Clore, 1983). However, the ways in which the environment automatically influences mood in the first place remain to be explored. The authors propose that one mechanism by which the environment influences affect is automatic evaluation, the nonconscious evaluation of environmental stimuli as good or bad. A first experiment demonstrated that repeated brief exposure to positive or negative stimuli (which leads to automatic evaluation) induces a corresponding mood in participants. In 3 additional studies, the authors showed that automatic evaluation affects information processing style. Experiment 4 showed that participants' mood mediates the effect of valenced brief primes on information processing. ((c) 2006 APA, all rights reserved).

  3. Robustness of digitally modulated signal features against variation in HF noise model

    Directory of Open Access Journals (Sweden)

    Shoaib Mobien


    Full Text Available Abstract High frequency (HF band has both military and civilian uses. It can be used either as a primary or backup communication link. Automatic modulation classification (AMC is of an utmost importance in this band for the purpose of communications monitoring; e.g., signal intelligence and spectrum management. A widely used method for AMC is based on pattern recognition (PR. Such a method has two main steps: feature extraction and classification. The first step is generally performed in the presence of channel noise. Recent studies show that HF noise could be modeled by Gaussian or bi-kappa distributions, depending on day-time. Therefore, it is anticipated that change in noise model will have impact on features extraction stage. In this article, we investigate the robustness of well known digitally modulated signal features against variation in HF noise. Specifically, we consider temporal time domain (TTD features, higher order cumulants (HOC, and wavelet based features. In addition, we propose new features extracted from the constellation diagram and evaluate their robustness against the change in noise model. This study is targeting 2PSK, 4PSK, 8PSK, 16QAM, 32QAM, and 64QAM modulations, as they are commonly used in HF communications.

  4. ExtraHF survey

    DEFF Research Database (Denmark)

    Piepoli, Massimo F; Binno, Simone; Corrà, Ugo


    AIMS: In heart failure (HF), exercise training programmes (ETPs) are a well-recognized intervention to improve symptoms, but are still poorly implemented. The Heart Failure Association promoted a survey to investigate whether and how cardiac centres in Europe are using ETPs in their HF patients...... of evidence on safety or benefit was cited. When implemented, an ETP was proposed to all HF patients in only 55% of the centres, with restriction according to severity or aetiology. CONCLUSIONS: With respect to previous surveys, there is evidence of increased availability of ETPs in HF in Europe, although too...

  5. Linking Automatic Evaluation to Mood and Information Processing Style: Consequences for Experienced Affect, Impression Formation, and Stereotyping (United States)

    Chartrand, Tanya L.; van Baaren, Rick B.; Bargh, John A.


    According to the feelings-as-information account, a person's mood state signals to him or her the valence of the current environment (N. Schwarz & G. Clore, 1983). However, the ways in which the environment automatically influences mood in the first place remain to be explored. The authors propose that one mechanism by which the environment…

  6. Investigation and Development of Data-Driven D-Region Model for HF Systems Impacts (United States)

    Eccles, J. V.; Rice, D.; Sojka, J. J.; Hunsucker, R. D.


    Space Environment Corporation (SEC) and RP Consultants (RPC) are to develop and validate a weather-capable D region model for making High Frequency (HF) absorption predictions in support of the HF communications and radar communities. The weather-capable model will assimilate solar and earth space observations from NASA satellites. The model will account for solar-induced impacts on HF absorption, including X-rays, Solar Proton Events (SPE's), and auroral precipitation. The work plan includes: I . Optimize D-region model to quickly obtain ion and electron densities for proper HF absorption calculations. 2. Develop indices-driven modules for D-region ionization sources for low, mid, & high latitudes including X-rays, cosmic rays, auroral precipitation, & solar protons. (Note: solar spectrum & auroral modules already exist). 3. Setup low-cost monitors of existing HF beacons and add one single-frequency beacon. 4. Use PENEX HF-link database with HF monitor data to validate D-region/HF absorption model using climatological ionization drivers. 5. Develop algorithms to assimilate NASA satellite data of solar, interplanetary, and auroral observations into ionization source modules. 6. Use PENEX HF-link & HF-beacon data for skill score comparison of assimilation versus climatological D-region/HF absorption model. Only some satellites are available for the PENEX time period, thus, HF-beacon data is necessary. 7. Use HF beacon monitors to develop HF-link data assimilation algorithms for regional improvement to the D-region/HF absorption model.

  7. Femtosecond stabilization of optical fiber links based on RF power detection; Femtosekundengenaue Stabilisierung von optischen Glasfaserstrecken basierend auf HF-Leistungsmessung

    Energy Technology Data Exchange (ETDEWEB)

    Lamb, Thorsten


    X-ray light sources like the free electron laser FLASH in Hamburg or the future XFEL generate light pulses with durations in the order of a few ten femtoseconds. To fulfill the requirements for the synchronisation of various components on this timescale, optical synchronisation systems are already successfully used. In this diploma thesis a novel photodiode-based, detection principle for the measurement of drifts in the optical links of such a synchronisation system is developed. The detection principle is nearly drift-free and highly robust. It is demonstrated that the long term stability of the assembled detector over 33 h is below 5 fs (peak to peak) at a standard deviation of 0.86 fs. Furthermore, an active stabilisation of a fibre link using this detector is successfully achieved. (orig.)

  8. New Adaptive Data Transmission Scheme Over HF Radio

    Directory of Open Access Journals (Sweden)

    Adil H. Ahmad


    Full Text Available Acceptable Bit Error rate can be maintained by adapting some of the design parameters such as modulation, symbol rate, constellation size, and transmit power according to the channel state.An estimate of HF propagation effects can be used to design an adaptive data transmission system over HF link. The proposed system combines the well known Automatic Link Establishment (ALE together with variable rate transmission system. The standard ALE is modified to suite the required goal of selecting the best carrier frequency (channel for a given transmission. This is based on measuring SINAD (Signal plus Noise plus Distortion to Noise plus Distortion, RSL (Received Signal Level, multipath phase distortion and BER (Bit Error Rate for each channel in the frequency list. Channel condition evaluation is done by two arrangements. In the first an FFT analysis is used where a pilot signal is transmitted over the channel, while the data itself is used in the second arrangement. Passive channel assessment is used to avoid bad channels hence limiting the frequency pool size to be used in the point to point communication and the time required for scanning and linking. An exchange of channel information between the transmitting and receiving stations is considered to select the modulation scheme for transmission. Mainly MPSK and MFSK are considered with different levels giving different data rate according to the channel condition. The results of the computer simulation have shown that when transmitting at a fixed channel symbol rate of 1200 symbol/sec, the information rate ranges from 2400 bps using 4FSK up to 3600 bps using 8PSK for SNR ranges from 11dB up to 26dB.

  9. Mitigating Doppler shift effect in HF multitone data modem (United States)

    Sonlu, Yasar


    Digital communications over High Frequency (HF) radio channels are getting important in recent years. Current HF requirements are for data transmission at rates 2.4 kbps or more to accommodate computer data links and digital secure voice. HF modems which were produced to meet these speeds are, serial modems and parallel modems. On the other hand, the HF sky-wave communication medium, the ionosphere, has some propagation problems such as multipath and Doppler shift. The effect of Doppler shift in a parallel modem which employs Differential Quadrature Phase Shift Keying (DQPSK) modulation is considered and a correction method to mitigate the Doppler Shift effect is introduced.

  10. Mid-Latitude Mobile Wideband HF- NVIS Channel Analysis: Part 1 (United States)


    communications (SATCOM) for beyond line-of- sight (LOS) links. However, standard HF systems operating over a 3-kHz bandwidth do not provide sufficient...wideband mid-latitude HF channel soundings and three-dimensional (3-D) ray-tracing simulations to develop a statistical model of a particular nearly...46 5 THE HF-NVIS CHANNEL SOUNDING SYSTEM ...................................................................... 47 5.1 TRANSMIT AND RECEIVE HF

  11. Text mining electronic hospital records to automatically classify admissions against disease: Measuring the impact of linking data sources. (United States)

    Kocbek, Simon; Cavedon, Lawrence; Martinez, David; Bain, Christopher; Manus, Chris Mac; Haffari, Gholamreza; Zukerman, Ingrid; Verspoor, Karin


    Text and data mining play an important role in obtaining insights from Health and Hospital Information Systems. This paper presents a text mining system for detecting admissions marked as positive for several diseases: Lung Cancer, Breast Cancer, Colon Cancer, Secondary Malignant Neoplasm of Respiratory and Digestive Organs, Multiple Myeloma and Malignant Plasma Cell Neoplasms, Pneumonia, and Pulmonary Embolism. We specifically examine the effect of linking multiple data sources on text classification performance. Support Vector Machine classifiers are built for eight data source combinations, and evaluated using the metrics of Precision, Recall and F-Score. Sub-sampling techniques are used to address unbalanced datasets of medical records. We use radiology reports as an initial data source and add other sources, such as pathology reports and patient and hospital admission data, in order to assess the research question regarding the impact of the value of multiple data sources. Statistical significance is measured using the Wilcoxon signed-rank test. A second set of experiments explores aspects of the system in greater depth, focusing on Lung Cancer. We explore the impact of feature selection; analyse the learning curve; examine the effect of restricting admissions to only those containing reports from all data sources; and examine the impact of reducing the sub-sampling. These experiments provide better understanding of how to best apply text classification in the context of imbalanced data of variable completeness. Radiology questions plus patient and hospital admission data contribute valuable information for detecting most of the diseases, significantly improving performance when added to radiology reports alone or to the combination of radiology and pathology reports. Overall, linking data sources significantly improved classification performance for all the diseases examined. However, there is no single approach that suits all scenarios; the choice of the

  12. Frederiksberg HF kursus

    DEFF Research Database (Denmark)

    Lindstrøm, Maria Duclos


    Notatet bygger på et interviewmateriale med dimitterede HF-kursister 3 måneder efter endt eksamen. Notatet undersøger dels, hvad der har hjulpet til at gennemføre, dels hvad der har været negativt og vanskeligt ved uddannelsen. Endvidere belyser notatet hvad kursisterne oplever at tage med fra de...

  13. Evaluating the provenance of Permian-Triassic and Palaeocene-Eocene ash beds by high precision U-Pb and Lu-Hf isotopic analyses of zircons: linking local sedimentary records to global events (United States)

    Eivind Augland, Lars; Jones, Morgan; Planke, Sverre; Svensen, Henrik; Tegner, Christian


    Zircons are a powerful tool in geochronology and isotope geochemistry, as their affinity for U and Hf in the crystal structure and the low initial Pb and Lu allow for precise and accurate dating by U-Pb ID-TIMS and precise and accurate determination of initial Hf isotopic composition by solution MC-ICP-MS analysis. The U-Pb analyses provide accurate chronostratigraphic controls on the sedimentary successions and absolute age frames for the biotic evolution across geological boundaries. Moreover, the analyses of Lu-Hf by solution MC-ICP-MS after Hf-purification column chemistry provide a powerful and robust fingerprinting tool to test the provenance of individual ash beds. Here we focus on ash beds from Permian-Triassic and Palaeocene successions in Svalbard and from the Palaeocene-Eocene Thermal Maximum (PETM) in Fur, Denmark. Used in combination with whole rock geochemistry from the ash layers and the available geochemical and isotopic data from potential source volcanoes, these data are used to evaluate the provenance of the Permian-Triassic and Palaeocene ashes preserved in Svalbard and PETM ashes in Denmark. If explosive eruptions from volcanic centres such as the Siberian Traps and the North Atlantic Igneous Province (NAIP) can be traced to distal basins as ash layers, they provide robust tests of hypotheses of global synchronicity of environmental changes and biotic crises. In addition, the potential correlation of ash layers with source volcanoes will aid in constraining the extent of explosive volcanism in the respective volcanic centres. The new integrated data sets will also contribute to establish new reference sections for the study of these boundary events when combined with stable isotope data and biostratigraphy.

  14. Pulsed inductive HF laser

    Energy Technology Data Exchange (ETDEWEB)

    Razhev, A M; Kargapol' tsev, E S [Institute of Laser Physics, Siberian Branch, Russian Academy of Sciences, Novosibirsk (Russian Federation); Churkin, D S; Demchuk, S V [Novosibirsk State University, Novosibirsk (Russian Federation)


    We report the results of experimentally investigated dependences of temporal, spectral and spatial characteristics of an inductive HF-laser generation on the pump conditions. Gas mixtures H{sub 2} – F{sub 2}(NF{sub 3} or SF6{sub 6}) and He(Ne) – H{sub 2} – F{sub 2}(NF{sub 3} or SF{sub 6}) were used as active media. The FWHM pulse duration reached 0.42 μs. This value corresponded to a pulsed power of 45 kW. For the first time, the emission spectrum of an inductive HF laser was investigated, which consisted of seven groups of bands with centres around the wavelengths of 2732, 2736, 2739, 2835, 2837, 2893 and 2913 nm. The cross section profile of the laser beam was a ring with a diameter of about 20 mm and width of about 5 mm. Parameters of laser operation in the repetitively pulsed regime were sufficiently stable. The amplitude instability of light pulses was no greater than 5% – 6%. (lasers)

  15. HF Interference, Procedures and Tools (Interferences HF, procedures et outils) (United States)


    such sources. The existing HF background noise possibly may be increased via ground wave and/or sky wave propagation. Increase of the existing HF...télécommunications filaires à large bande. Les télécommunications via le réseau électrique courant, dites PowerLine Communications (PLT ou PLC) et diverses...cumulative de nombreuses sources de même type. Le bruit de fond HF existant risque d’être augmenté par propagation de l’onde terrestre et/ou aérienne

  16. Automatic sequences

    CERN Document Server

    Haeseler, Friedrich


    Automatic sequences are sequences which are produced by a finite automaton. Although they are not random they may look as being random. They are complicated, in the sense of not being not ultimately periodic, they may look rather complicated, in the sense that it may not be easy to name the rule by which the sequence is generated, however there exists a rule which generates the sequence. The concept automatic sequences has special applications in algebra, number theory, finite automata and formal languages, combinatorics on words. The text deals with different aspects of automatic sequences, in particular:· a general introduction to automatic sequences· the basic (combinatorial) properties of automatic sequences· the algebraic approach to automatic sequences· geometric objects related to automatic sequences.

  17. Marburg Hemorrhagic Fever (Marburg HF) (United States)

    ... CDC Cancel Submit Search The CDC Marburg hemorrhagic fever (Marburg HF) Note: Javascript is disabled or is ... first recognized in 1967, when outbreaks of hemorrhagic fever occurred simultaneously in laboratories in Marburg and Frankfurt, ...

  18. Hf Transition Probabilities and Abundances

    CERN Document Server

    Lawler, J E; Labby, Z E; Sneden, C; Cowan, J J; Ivans, I I


    Radiative lifetimes from laser-induced fluorescence measurements, accurate to about +/- 5 percent, are reported for 41 odd-parity levels of Hf II. The lifetimes are combined with branching fractions measured using Fourier transform spectrometry to determine transition probabilities for 150 lines of Hf II. Approximately half of these new transition probabilities overlap with recent independent measurements using a similar approach. The two sets of measurements are found to be in good agreement for measurements in common. Our new laboratory data are applied to refine the hafnium photospheric solar abundance and to determine hafnium abundances in 10 metal-poor giant stars with enhanced r-process abundances. For the Sun we derive log epsilon (Hf) = 0.88 +/- 0.08 from four lines; the uncertainty is dominated by the weakness of the lines and their blending by other spectral features. Within the uncertainties of our analysis, the r-process-rich stars possess constant Hf/La and Hf/Eu abundance ratios, log epsilon (Hf...

  19. New evidence for coupled clock regulation of the normal automaticity of sinoatrial nodal pacemaker cells: bradycardic effects of ivabradine are linked to suppression of intracellular Ca2+ cycling (United States)

    Yaniv, Yael; Sirenko, Syevda; Ziman, Bruce D.; Spurgeon, Harold A.; Maltsev, Victor A.; Lakatta, Edward G.


    Beneficial clinical bradycardic effects of ivabradine (IVA) have been interpreted solely on the basis of If inhibition, because IVA specifically inhibits If in sinoatrial nodal pacemaker cells (SANC). However, it has been recently hypothesized that SANC normal automaticity is regulated by crosstalk between an “M clock,” the ensemble of surface membrane ion channels, and a “Ca2+ clock,” the sarcoplasmic reticulum (SR). We tested the hypothesis that crosstalk between the two clocks regulates SANC automaticity, and that indirect suppression of the Ca2+ clock further contributes to IVA-induced bradycardia. IVA (3μM) not only reduced If amplitude by 45±6% in isolated rabbit SANC, but the IVA-induced slowing of the action potential (AP) firing rate was accompanied by reduced SR Ca2+ load, slowed intracellular Ca2+ cycling kinetics, and prolonged the period of spontaneous local Ca2+ releases (LCRs) occurring during diastolic depolarization. Direct and specific inhibition of SERCA2 by cyclopiazonic acid (CPA) had effects similar to IVA on LCR period and AP cycle length. Specifically, the LCR period and AP cycle length shift toward longer times almost equally by either direct perturbations of the M clock (IVA) or the Ca2+ clock (CPA), indicating that the LCR period reports the crosstalk between the clocks. Our numerical model simulations predict that entrainment between the two clocks that involves a reduction in INCX during diastolic depolarization is required to explain the experimentally AP firing rate reduction by IVA. In summary, our study provides new evidence that a coupled-clock system regulates normal cardiac pacemaker cell automaticity. Thus, IVA-induced bradycardia includes a suppression of both clocks within this system. PMID:23651631

  20. Automatic extracting topic page links from Hub page%中心网页中主题网页链接的自动抽取

    Institute of Scientific and Technical Information of China (English)



    基于扩展标记树,提出了一种从中心网页中自动抽取主题网页链接的方法。首先构建链接有序表,利用链接前缀树发现主题网页链接拒绝规则,实现对网页链接类型的预判定;其次,通过分组分割和相似分组重新合并,把页面中的链接归入到不同分组之中,进而识别分组的类型和核心区域所在的分组,最终把链接归入三类链接集合之中。实验结果表明该方法无需训练即可实现中心网页中主题网页链接的高精度抽取。%A topic link extraction method from Hub page based on extended label tree was proposed.Firs,a topic link sorted list was build and deny rules were learned by prefix tree,then,the link type was pre-determined.Second,by group splitting and re-merging,each candidate link was classified into different groups.The group type and the group which represented the hub page's core region were identified,and finally all links were put into three different collections.Experimental results show that this method can achieve high-precision for topic link extraction without training.

  1. Treatment of atrial fibrillation with a dual defibrillator in heart failure patients (TRADE HF: protocol for a randomized clinical trial

    Directory of Open Access Journals (Sweden)

    Grandinetti Giuseppe


    Full Text Available Abstract Background Heart failure(HF and atrial fibrillation(AF frequently coexist in the same patient and are associated with increased mortality and frequent hospitalizations. As the concomitance of AF and HF is often associated with a poor prognosis, the prompt treatment of AF in HF patients may significantly improve outcome. Methods/design Recent implantable cardiac resynchronization (CRT devices allow electrical therapies to treat AF automatically. TRADE-HF (trial registration: NCT00345592; is a prospective, randomized, double arm study aimed at demonstrating the efficacy of an automatic, device-based therapy for treatment of atrial tachycardia and fibrillation(AT/AF in patients indicated for CRT. The study compares automatic electrical therapy to a traditional more usual treatment of AT/AF: the goal is to demonstrate a reduction in a combined endpoint of unplanned hospitalizations for cardiac reasons, death from cardiovascular causes or permanent AF when using automatic atrial therapy as compared to the traditional approach involving hospitalization for symptoms and in-hospital treatment of AT/AF. Discussion CRT pacemaker with the additional ability to convert AF as well as ventricular arrhythmias may play a simultaneous role in rhythm control and HF treatment. The value of the systematic implantation of CRT ICDs with the capacity to deliver atrial therapy in HF patients at risk of AF has not yet been explored. The TRADE-HF study will assess in CRT patients whether a strategy based on automatic management of atrial arrhythmias might be a valuable option to reduce the number of hospital admission and to reduce the progression the arrhythmia to a permanent form. Trial registration NCT00345592

  2. 基于CC-link总线的自动化生产线分布式控制技术%Discrete Control Technology Based on CC-link for Automatic Assembly Line

    Institute of Scientific and Technical Information of China (English)

    王鹏; 杨培生


    为适应产业转型升级对网络化自动化生产线提出的迫切需求,解决传统分布式控制(DCS)存在的通信速率低、故障率高的问题,利用一套6单元小型加工装配自动化生产线,开展了基于CC-link现场总线的新型分布式控制技术的研究,阐述了设备软、硬件设计和CC-link总线数据链接过程.这种结合工作流程和通信方式特点构建的过程控制级采用CC-link总线、过程监控级采用RS485/422串行总线的两层分布式控制网络,可实现手动、自动控制和上位机远程监控.使用效果表明该控制技术具有可靠性高、适应性强、成本较低的特点.%In order to meet the urgent demand for network-based automatic production lines resulting from transformation and upgrading of industrial structure,and for effective solution on the problem of low communication rate and high failure of traditional Discrete Control System(DCS),a new discrete control technology based on CC-link Field Bus was studied through using a set of 6-unit small-scale automated assembly and storage line,and the design process of software,hardware of the equipment and CC-link Bus data link was elaborated.The functions of manual,automatic control as well as remote supervision on upper machine could be implemented by the two-layer distributed control network composed of process control level based on CC-link Bus with characteristics of working flow and communication method structure and process monitor level based on RS485/422 serial Bus.Practice effect shows that the control technology bears the characteristics of high reliability,strong adaptability and lower cost.

  3. Environmentally friendly HF (DF) lasers (United States)

    Apollonov, V. V.


    Dedicated to the 100th anniversary of the birth of Academician A M Prokhorov, this paper reviews the physics of self-sustained volume discharge without preionization—self-initiated volume discharge (SIVD)—in the working mixtures of non-chain hydrofluoride HF (deuterofluoride (DF)) lasers. The dynamics of SIVD in discharge gaps with different geometries is thoroughly described. The mechanisms for the restriction of current density in a diffuse channel in electric discharges in SF6 and SF6 based mixtures (which determines whether SIVD is possible) are proposed and analyzed using simple models. The most probable mechanisms are the electron impact dissociation of SF6 and other mixture components, electron-ion recombination and electron attachment to vibrationally excited SF6 molecules. Starting from a comparative analysis of the rate coefficients of these processes, it is shown that electron-ion recombination is capable of compensating for electron detachment from negative ions via electron impact. It is also established that SIVD is not only observed in SF6, but also in other strongly electronegative gases. The factors that determine the uniformity of the active medium in non-chain HF (DF) lasers are analyzed. Some special features of non-chain HF (DF) lasers with different apertures operating are carefully examined. Consideration is given to the problem of increasing the aperture and discharge volume of non-chain HF (DF) lasers. Based on our experimental results, the possibility of increasing the energy of such lasers to ~1 kJ and above is shown.

  4. Crystal structure of Na2HfSi2O7 by Rietveld refinement

    Directory of Open Access Journals (Sweden)

    Nicolas Massoni


    Full Text Available The structure of triclinic disodium hafnium disilicate, Na2HfSi2O7, has been determined by laboratory powder X-ray diffraction and refined by the Rietveld refinement. The structure is a framework made of alternate layers of HfO6 octahedra and SiO4 tetrahedra linked by common O atoms. Sodium atoms are located in the voids of the framework, aligned into tunnels along the [010] direction. Na2HfSi2O7 is isostructural with the parakeldyshite Na2ZrSi2O7 phase.

  5. European coordination for coastal HF radar data in EMODnet Physics (United States)

    Mader, Julien; Novellino, Antonio; Gorringe, Patrick; Griffa, Annalisa; Schulz-Stellenfleth, Johannes; Montero, Pedro; Montovani, Carlo; Ayensa, Garbi; Vila, Begoña; Rubio, Anna; Sagarminaga, Yolanda


    HFR data access and tools. In this context, a coordinated action between EuroGOOS HF Radar Task Team and EMODnet Physics has been pushed to achieve a pilot integration of the data from existing HF radar systems, with the following operational objectives: definition of needed metadata; standardization for data format and QC; recommendation for the implementation of HF radar data in Regional and European Portals. This coordinated action for organizing and creating links between operators of HF radar platforms will benefit to the implementation of this key information in the European Marine Observation Data Network.

  6. Special Topics in HF Propagation (United States)


    Instituto Superiore Tecnico . Ava Rovisco Pals, IO00 Lisboa, Portugal Prof. FERNANDES, Manual C’arvalho, Mr Instituto Nacional de Meteorologia e Geofisica, Rua...frequency (channel) assignments which are based onl prediction services information must be used. The user in this case either manually or automatically...programmsed to provide full automatic frequency decision making and selection, if desired. Current plans include a limited manual capability. The

  7. Automatic Reading

    Institute of Scientific and Technical Information of China (English)



    <正>Reading is the key to school success and,like any skill,it takes practice.A child learns to walk by practising until he no longer has to think about how to put one foot in front of the other.The great athlete practises until he can play quickly,accurately and without thinking.Ed- ucators call it automaticity.

  8. A thirty second isomer in Hf-171

    NARCIS (Netherlands)

    Campbell, P; Billowes, J; Cochrane, ECA; Cooke, JL; Cooper, TG; Dendooven, P; Evans, DE; Grant, IS; Griffith, JAR; Honkanen, A; Huhta, M; Oinonen, M; Pearson, MR; Penttila, H; Persson, B.L.; Richardson, DS; Tungate, G; Wheeler, PD; Zybert, L; Aysto, J


    An isomer has been detected in Hf-171 with a half-life of T-1/2 = 29.5(9) s. The state was populated in the Yb-170(alpha,3n)Hf-171m reaction at a beam energy of E-alpha = 50 MeV in an on-line ion guide isotope separator. The isomeric Hf-17lm(+) beam was extracted from the ion guide, mass-analysed an

  9. A Semi-Automatic, Remote-Controlled Video Observation System for Transient Luminous Events

    DEFF Research Database (Denmark)

    Allin, Thomas Højgaard; Neubert, Torsten; Laursen, Steen


    In support for global ELF/VLF observations, HF measurements in France, and conjugate photometry/VLF observations in South Africa, we developed and operated a semi-automatic, remotely controlled video system for the observation of middle-atmospheric transient luminous events (TLEs). Installed...... at the Pic du Midi Observatory in Southern France, the system was operational during the period from July 18 to September 15, 2003. The video system, based two low-light, non-intensified CCD video cameras, was mounted on top of a motorized pan/tilt unit. The cameras and the pan/tilt unit were controlled over...... serial links from a local computer, and the video outputs were distributed to a pair of PCI frame grabbers in the computer. This setup allowed remote users to log in and operate the system over the internet. Event detection software provided means of recording and time-stamping single TLE video fields...

  10. An Experiment in Automatic Hierarchical Document Classification. (United States)

    Garland, Kathleen


    Describes method of automatic document classification in which documents classed as QA by Library of Congress classification system were clustered at six thresholds by keyword using single link technique. Automatically generated clusters were compared to Library of Congress subclasses, and partial classified hierarchy was formed. Twelve references…

  11. The study of multilayers Fe/Hf and Ni/Hf by slow positron beam technique (United States)

    Tashiro, Mutsumi; Nakajyo, Terunobu; Murashige, Yusuke; Koizumi, Tomoya; Kanazawa, Ikuzo; Komori, Fumio; Soe, We-Hyo; Yamamoto, Ryoichi; Ito, Yasuo


    The S-parameters versus the incident positron energy are measured in the Ni/Hf multilayer, thin Hf film, thin Fe film and the bilayer Fe/Hf. We have analyzed the change in vacancy-type defects in these multilayers and thin films with the deposition temperature in the MBE system.

  12. HF radiation emitted by chaotic leader processes (United States)

    Mäkelä, J. S.; Edirisinghe, M.; Fernando, M.; Montaño, R.; Cooray, V.


    This paper presents direct measurements of narrowband 10 MHz HF radiation from so-called “chaotic leaders” associated with subsequent return strokes. Although the term is controversial and poorly defined, we find that more than 30% of subsequent strokes in close lightning flashes contain electric field characteristics that are best described as “chaotic”. In earlier studies, return strokes have consistently been observed to be the strongest sources of HF radiation, but the results for leader processes are less consistent. We also observe return strokes to be the main HF emitter, and the leaders before the first return stroke in a flash sequence also emit HF though somewhat less intensely. The leaders preceding subsequent strokes typically emit little or no HF radiation, whether they are dart or dart-stepped leaders. However, it was observed that the presence of a chaotic component increases the leader HF intensity dramatically Defining the HF intensity unequivocally can be problematic for processes like chaotic leaders which have a combination of continuous and impulsive phenomena. Two time-domain methods were used to measure the HF intensity, the peak energy and the RMS energy. In the frequency domain these correspond to the energy spectral density (ESD) and power spectral density (PSD), respectively. It was found that the methods are not necessarily compatible. Thus, it is suggested that to clarify future work, leader processes should be characterized by the PSD rather than the ESD.

  13. HfS, Hyperfine Structure Fitting Tool

    CERN Document Server

    Estalella, Robert


    HfS is a tool to fit the hyperfine structure of spectral lines, with multiple velocity components. The HfS_nh3 procedures included in HfS fit simultaneously the hyperfine structure of the NH$_3$ (J,K)= (1,1) and (2,2) transitions, and perform a standard analysis to derive $T_\\mathrm{ex}$, NH$_3$ column density, $T_\\mathrm{rot}$, and $T_\\mathrm{k}$. HfS uses a Monte Carlo approach for fitting the line parameters. Especial attention is paid to the derivation of the parameter uncertainties. HfS includes procedures that make use of parallel computing for fitting spectra from a data cube.

  14. Aspects of HF radio propagation

    Directory of Open Access Journals (Sweden)

    Stephane Saillant


    Full Text Available

    radio systems. From the point of view Working Group 2 of the COST 296 Action, interest lies with effects associated

    with propagation via the ionosphere of signals within the HF band. Several aspects are covered in this paper:

    a The directions of arrival and times of flight of signals received over a path oriented along the trough have

    been examined and several types of propagation effects identified. Of particular note, combining the HF observations

    with satellite measurements has identified the presence of irregularities within the floor of the trough that

    result in propagation displaced from the great circle direction. An understanding of the propagation effects that

    result in deviations of the signal path from the great circle direction are of particular relevance to the operation

    of HF radiolocation systems.

    b Inclusion of the results from the above mentioned measurements into a propagation model of the northerly

    ionosphere (i.e. those regions of the ionosphere located poleward of, and including, the mid-latitude trough

    and the use of this model to predict the coverage expected from transmitters where the signals impinge on the

    northerly ionosphere

  15. Ergonomics action research II: a framework for integrating HF into work system design. (United States)

    Neumann, W P; Village, J


    This paper presents a conceptual framework that can support efforts to integrate human factors (HF) into the work system design process, where improved and cost-effective application of HF is possible. The framework advocates strategies of broad stakeholder participation, linking of performance and health goals, and process focussed change tools that can help practitioners engage in improvements to embed HF into a firm's work system design process. Recommended tools include business process mapping of the design process, implementing design criteria, using cognitive mapping to connect to managers' strategic goals, tactical use of training and adopting virtual HF (VHF) tools to support the integration effort. Consistent with organisational change research, the framework provides guidance but does not suggest a strict set of steps. This allows more adaptability for the practitioner who must navigate within a particular organisational context to secure support for embedding HF into the design process for improved operator wellbeing and system performance. There has been little scientific literature about how a practitioner might integrate HF into a company's work system design process. This paper proposes a framework for this effort by presenting a coherent conceptual framework, process tools, design tools and procedural advice that can be adapted for a target organisation.

  16. U-Pb ages and Hf isotope compositions of zircons in plutonic rocks from the central Famatinian arc, Argentina (United States)

    Otamendi, Juan E.; Ducea, Mihai N.; Cristofolini, Eber A.; Tibaldi, Alina M.; Camilletti, Giuliano C.; Bergantz, George W.


    The Famatinian arc formed around the South Iapetus rim during the Ordovician, when oceanic lithosphere subducted beneath the West Gondwana margin. We present combined in situ U-Th-Pb and Lu-Hf isotope analyses for zircon to gain insights into the origin and evolution of Famatinian magmatism. Zircon crystals sampled from four intermediate and silicic plutonic rocks confirm previous observations showing that voluminous magmatism took place during a relatively short pulse between the Early and Middle Ordovician (472-465 Ma). The entire zircon population for the four plutonic rocks yields coherent εHf negative values and spreads over several ranges of initial εHf(t) units (-0.3 to -8.0). The range of εHf units in detrital zircons of Famatinian metasedimentary rocks reflects a prolonged history of the cratonic sources during the Proterozoic to the earliest Phanerozoic. Typical tonalites and granodiorites that contain zircons with evolved Hf isotopic compositions formed upon incorporating (meta)sedimentary materials into calc-alkaline metaluminous magmas. The evolved Hf isotope ratios of zircons in the subduction related plutonic rocks strongly reflect the Hf isotopic character of the metasedimentary contaminant, even though the linked differentiation and growth of the Famatinian arc crust was driven by ascending and evolving mantle magmas. Geochronology and Hf isotope systematics in plutonic zircons allow us understanding the petrogenesis of igneous series and the provenance of magma sources. However, these data could be inadequate for computing model ages and supporting models of crustal evolution.

  17. HF Transverse Segmentation and Tagging Jet Capability

    CERN Document Server

    Doroshkevich, E A; Kuleshov, Sergey


    So called tagging jets and pile-up were simulated for the optimisation of the HF segmentation. The energy resolution, angular resolution and efficiency of jet reconstruction are defined for different calorimeter segmentation.

  18. Collisional quenching of highly rotationally excited HF

    CERN Document Server

    Yang, Benhui; Forrey, R C; Stancil, P C; Balakrishnan, N


    Collisional excitation rate coefficients play an important role in the dynamics of energy transfer in the interstellar medium. In particular, accurate rotational excitation rates are needed to interpret microwave and infrared observations of the interstellar gas for nonlocal thermodynamic equilibrium line formation. Theoretical cross sections and rate coefficients for collisional deexcitation of rotationally excited HF in the vibrational ground state are reported. The quantum-mechanical close-coupling approach implemented in the nonreactive scattering code MOLSCAT was applied in the cross section and rate coefficient calculations on an accurate 2D HF-He potential energy surface. Estimates of rate coefficients for H and H$_2$ colliders were obtained from the HF-He collisional data with a reduced-potential scaling approach. The calculation of state-to-state rotational quenching cross sections for HF due to He with initial rotational levels up to $j=20$ were performed for kinetic energies from 10$^{-5}$ to 15000...

  19. Microhardness evaluation alloys Hf-Si-B; Avaliacao de microdureza de ligas Hf-Si-B

    Energy Technology Data Exchange (ETDEWEB)

    Gigolotti, Joao Carlos Janio; Costa, Eliane Fernandes Brasil [Centro Universitario de Volta Redonda (UNIFOA), Volta Redonda, RJ (Brazil); Nunes, Carlos Angelo; Rocha, Elisa Gombio; Coelho, Gilberto Carvalho, E-mail:, E-mail:, E-mail:, E-mail:, E-mail: [Universidade de Sao Paulo (USP), Lorena, SP (Brazil)


    The technological advance has generated increasing demand for materials that can be used under high temperature, what includes intermetallic MR-Si-B (MR = refractory metal) alloys with multiphase structures, that can also be applied in oxide environments. Thus, this work had for objective the micro hardness study of the Hf-Si-B system alloys, heat treated at 1600 deg C, in the Hf rich region. Hf-Si-B alloys had been produced with blades of Hf (min. 99.8%), Si (min. 99.998%) and B (min. 99.5%), in the voltaic arc furnace and heat treated at 1600 deg C under argon atmosphere. The relationship of the phases had been previously identified by X-ray diffraction and contrast in backscattered electron imaging mode. The alloys had their hardness analyzed by method Vickers (micro hardness) with load of 0.05 kgf and 0.2 kgf and application time of 20 s. The results, obtained from the arithmetic mean of measurements for each alloy on the heterogeneous region, showed a mean hardness of 11.08 GPA, with small coefficient of variation of 3.8%. The borides HfB2 (19.34 GPa) e HfB - 11.76 GPa, showed the hardness higher than the silicides Hf2Si (8.57 GPa), Hf5Si3 (9.63 GPa), Hf3Si2 (11.66 GPa), Hf5Si4 (10.00 GPa), HfSi (10.02 GPa) e HfSi2 (8.61 GPa). (author)

  20. Curative effect of HF10 on liver and peritoneal metastasis mediated by host antitumor immunity (United States)

    Hotta, Yoshihiro; Kasuya, Hideki; Bustos, Itzel; Naoe, Yoshinori; Ichinose, Toru; Tanaka, Maki; Kodera, Yasuhiro


    Background HF10 is a highly attenuated type 1 herpes simplex virus (HSV) with proven effective oncolytic effect. Previous investigations have demonstrated that colon cancer mice model treated with HF10 not only had better survival but were also resistant to the reimplantation of the antitumor effect mediated by host antitumor immunity. Importantly, it has also been noted that in mice with antitumors implanted on both sides of the back, an injection of HF10 on only one side strongly restrains not only the injected antitumor but also the non-injected ones. Materials and methods MC26 colon cancer cells were injected subcutaneously into the back, spleen, and intraperitoneal region of metastasis model mice. Antitumor volume and survival rate were monitored. To measure cytotoxic T lymphocytes (CTL) cytotoxicity against MC26, lymphocytes were extracted from the spleens of the peritoneal metastasis model mice as well as from the thymus of the liver metastasis model mice. The expression of interferon gamma was examined by enzyme-linked immunospot assay. Samples from the liver metastasis model mice were subjected to polymerase chain reaction to quantify the level of HSV genomes. Results HF10 was injected only on the back antitumor; however, a antitumor-suppressor effect was observed against liver and peritoneal metastases. When HF10 genome was measured, we observed lower genome on liver metastases compared to back antitumor genome quantity. CTL activity against MC26 was also observed. These results indicate that local administration of HF10 exerts a curative effect on systemic disease, mediated by host antitumor immunity. Conclusion HF10 local administration stimulates antitumor immunity to recognize antitumor-specific antigen, which then improves systemic disease. Metastatic antitumors lysis, on the other hand, appears to be mediated by the host immune system, rather than by virus-mediated direct oncolysis. PMID:28331843

  1. General concepts of modern HF communications (United States)

    Aarons, Jules

    Both conceptual and hardware advancements have led to substantial systems developments in military HF communications; the former encompass coding and error correction techniques for security, in order to minimize propagation and interference, while the latter prominently include digital equipment permitting the selection of a frequency for a particular path and propagation mode, as well as modulation selection. Propagation-related advancements involve better statistical models as well as advancements in short-term forecasting methods responsive to changes in solar-geophysical parameters. Adaptive HF systems have been developed for meteor-scatter radio communications.

  2. Research on Multi-Layer Distributed HF Radio Network Structure

    Institute of Scientific and Technical Information of China (English)

    Hui Dai; Chun-Jiang Wang; Quan Yu


    High frequency (HF) transmission is an important communication techniques. However, conventional point-to-point transmission can be easily destroyed, which limits its utilization in practice. HF networking communication has the capability against demolishment. The network structure is one of the key factors for HF networking communication. In this paper, a novel analysis method of the network connectedness based on the eigenvalue is derived, and a multi-layer distributed HF radio network structure is proposed. Both the theore tical analysis and the computer simulation results verify that the application of the proposed network structure in the HF radio communication can improve the anti demolishment ability of the HF network efficiently.

  3. Systematic Comparison of HF CMOS Transconductors

    NARCIS (Netherlands)

    Klumperink, Eric A.M.; Nauta, Bram


    Transconductors are commonly used as active elements in high-frequency (HF) filters, amplifiers, mixers, and oscillators. This paper reviews transconductor design by focusing on the V-I kernel that determines the key transconductor properties. Based on bandwidth considerations, simple V-I kernels wi

  4. Electron impact on vibrationally cold {{HF}}^{+} (United States)

    Cristian Stroe, Marius; Fifirig, Magda


    The dissociative recombination and vibrational excitation processes induced by electron impact on vibrationally cold {{HF}}+ are investigated in the framework of the multichannel quantum defect theory for electron energies below 1 eV. The thermal rate coefficients for the electron temperature range from 10 to 5000 K are reported.


    DEFF Research Database (Denmark)

    Thrane, Kristine; Connelly, James Norman; Bizzarro, Martin


    After considerable controversy regarding the (176)Lu decay constant (lambda(176)Lu), there is now widespread agreement that (1.867 +/- 0.008) x 10(-11) yr(-1) as confirmed by various terrestrial objects and a 4557 Myr meteorite is correct. This leaves the (176)Hf excesses that are correlated with...

  6. The two-probe device for automatic measurement of the reflection coefficient

    Directory of Open Access Journals (Sweden)

    Л.Я. Ільницький


    Full Text Available  The two-probe device for automatic measurement of the reflection coefficient in the HF range is proposed and analyzed. The main parts in the instrument control system are the sum-and-difference bridge and the microprocessor.

  7. Automatic document navigation for digital content remastering (United States)

    Lin, Xiaofan; Simske, Steven J.


    This paper presents a novel method of automatically adding navigation capabilities to re-mastered electronic books. We first analyze the need for a generic and robust system to automatically construct navigation links into re-mastered books. We then introduce the core algorithm based on text matching for building the links. The proposed method utilizes the tree-structured dictionary and directional graph of the table of contents to efficiently conduct the text matching. Information fusion further increases the robustness of the algorithm. The experimental results on the MIT Press digital library project are discussed and the key functional features of the system are illustrated. We have also investigated how the quality of the OCR engine affects the linking algorithm. In addition, the analogy between this work and Web link mining has been pointed out.

  8. An Evaluation of Automatically Constructed Hypertexts for Information Retrieval. (United States)

    Melucci, Massimo


    Assesses the retrieval effectiveness of automatically constructed interdocument hypertext links in information retrieval (IR). Describes experiments using statistical and probabilistic techniques that were designed to obtain evidence concerning the usefulness of querying and browsing automatically constructed IR hypertexts. Results indicate a…

  9. REMPI Spectroscopy of HfF

    CERN Document Server

    Loh, Huanqian; Yahn, Tyler S; Looser, Herbert; Field, Robert W; Cornell, Eric A


    The spectrum of electronic states at 30000--33000 cm$^{-1}$ in hafnium fluoride has been studied using (1+1) resonance-enhanced multi-photon ionization (REMPI) and (1+1$'$) REMPI. Six $\\Omega' = 3/2$ and ten $\\Pi_{1/2}$ vibronic bands have been characterized. We report the molecular constants for these bands and estimate the electronic energies of the excited states using a correction derived from the observed isotope shifts. When either of two closely spaced $\\Pi_{1/2}$ electronic states is used as an intermediate state to access autoionizing Rydberg levels, qualitatively distinct autoionization spectra are observed. The intermediate state-specificity of the autoionization spectra bodes well for the possibility of using a selected $\\Pi_{1/2}$ state as an intermediate state to create ionic HfF$^+$ in various selected quantum states, an important requirement for our electron electric dipole moment (eEDM) search in HfF$^+$.

  10. Automatic Fiscal Stabilizers

    Directory of Open Access Journals (Sweden)

    Narcis Eduard Mitu


    Full Text Available Policies or institutions (built into an economic system that automatically tend to dampen economic cycle fluctuations in income, employment, etc., without direct government intervention. For example, in boom times, progressive income tax automatically reduces money supply as incomes and spendings rise. Similarly, in recessionary times, payment of unemployment benefits injects more money in the system and stimulates demand. Also called automatic stabilizers or built-in stabilizers.

  11. Digitally Driven Antenna for HF Transmission (United States)


    the 1-MHz carrier signal. This signal is then fed into the base terminals of an NPN/ PNP transistor pair arranged in a push–pull configura- tion. A dual...negative voltage connected to the collector terminal of the PNP transistor . Since it was not possible to explicitly simulate the radia- tion of the time...complementary pair of switching transistors is driven with a pulsewidth modulated HF signal, eliminating the requirement for a frequency-dependent

  12. RFID UHF i HF w bibliotekach

    Directory of Open Access Journals (Sweden)

    Gładysz Bartłomiej


    Full Text Available The potential of the innovative Radio Frequency Identification (RFID technology to be applied for support, acceleration and automation of the circulation process of library collection is presented. Technology basics, and hardware and software components are described. Two different radio standards used in libraries are compared. The goal is to present the potential of RFID technology for libraries, to highlight the differences and to build a basis for further consideration of UHF and HF alternatives.

  13. Automatic differentiation bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Corliss, G.F. (comp.)


    This is a bibliography of work related to automatic differentiation. Automatic differentiation is a technique for the fast, accurate propagation of derivative values using the chain rule. It is neither symbolic nor numeric. Automatic differentiation is a fundamental tool for scientific computation, with applications in optimization, nonlinear equations, nonlinear least squares approximation, stiff ordinary differential equation, partial differential equations, continuation methods, and sensitivity analysis. This report is an updated version of the bibliography which originally appeared in Automatic Differentiation of Algorithms: Theory, Implementation, and Application.

  14. Mediation and Automatization. (United States)

    Hutchins, Edwin

    This paper discusses the relationship between the mediation of task performance by some structure that is not inherent in the task domain itself and the phenomenon of automatization, in which skilled performance becomes effortless or phenomenologically "automatic" after extensive practice. The use of a common simple explicit mediating…

  15. Automatic Differentiation Package

    Energy Technology Data Exchange (ETDEWEB)


    Sacado is an automatic differentiation package for C++ codes using operator overloading and C++ templating. Sacado provide forward, reverse, and Taylor polynomial automatic differentiation classes and utilities for incorporating these classes into C++ codes. Users can compute derivatives of computations arising in engineering and scientific applications, including nonlinear equation solving, time integration, sensitivity analysis, stability analysis, optimization and uncertainity quantification.

  16. Digital automatic gain control (United States)

    Uzdy, Z.


    Performance analysis, used to evaluated fitness of several circuits to digital automatic gain control (AGC), indicates that digital integrator employing coherent amplitude detector (CAD) is best device suited for application. Circuit reduces gain error to half that of conventional analog AGC while making it possible to automatically modify response of receiver to match incoming signal conditions.

  17. Focusing Automatic Code Inspections

    NARCIS (Netherlands)

    Boogerd, C.J.


    Automatic Code Inspection tools help developers in early detection of defects in software. A well-known drawback of many automatic inspection approaches is that they yield too many warnings and require a clearer focus. In this thesis, we provide such focus by proposing two methods to prioritize

  18. Improvements on Signal Processing for HF Radar

    Institute of Scientific and Technical Information of China (English)

    LIU Yongtan; SHEN Yiying


    In this paper improvements on signalprocessing are achieved to enhance the performancesof H-F radar system, being unobtainable by the con-ventional signal processing. Using the improved sig-nal processing both high range resolution and longcoherent integration time may be obtained for goodbenefit to the target resolution and weak signal de-tection. Modification to the unmatched correspon-dence between range delay samples and range resolu-tion ceils saves an additional accumulation loss in therange processing. Finally, comparisons between theimproved and the conventional signal processing aregiven by numerical simulation.

  19. Systematic Study on Triaxial Superdeformed Bands of Hf Isotopes

    Institute of Scientific and Technical Information of China (English)

    ZHANG Da-Li; DING Bin-Gang


    Properties of the triaxial superdeformed (TSD) bands of Hf isotopes are investigated systematically within the supersymmetry scheme including many-body interactions and a perturbation possessing the SO(5) (or SU(5)) symmetry on the rotational symmetry. Quantitatively good results of the γ-ray energies, the dynamical moments of inertia,and the spin of the TSD bands in Hf isotopes are obtained. It shows that this approach is quite powerful in describing the properties of the triaxial superdeformation in Hf isotopes.

  20. Determining Energy Distributions of HF-Accelerated Electrons at HAARP (United States)


    AFRL-AFOSR-VA-TR-2015-0383 Determining energy distributions of HF-accelerated electrons at HAARP Christopher Fallen University of Alaska Fairbanks...2012 - 11/14/2015 4. TITLE AND SUBTITLE Determining energy distributions of HF-accelerated electrons at HAARP 5a. CONTRACT NUMBER FA9550-12-1-0424...transmitted from the High-frequency Active Auroral Research Program ( HAARP ) transmitter in Alaska. For a given fixed HF-plasma interaction altitude

  1. Physics of the Geospace Response to Powerful HF Radio Waves (United States)


    studies of the response of the Earth’s space plasma to high-power HF radio waves from the High-frequency Active Auroral Research Program ( HAARP ...of HF heating and explored to simulate artificial ducts. DMSP- HAARP experiments revealed that HF-created ion outflows and artificial density the topside ionosphere appeared faster than predicted by the models, pointing to kinetic (suprathermal) effects. CHAMP/GRACE- HAARP experiments

  2. Curative effect of HF10 on liver and peritoneal metastasis mediated by host antitumor immunity

    Directory of Open Access Journals (Sweden)

    Hotta Y


    Full Text Available Yoshihiro Hotta,1 Hideki Kasuya,2 Itzel Bustos,2 Yoshinori Naoe,2 Toru Ichinose,2 Maki Tanaka,3 Yasuhiro Kodera1 1Department of Surgery II, 2Cancer Immune Therapy Research Center, Nagoya University Graduate School of Medicine, Nagoya, 3Takara Bio Inc., Otsu, Japan Background: HF10 is a highly attenuated type 1 herpes simplex virus (HSV with proven effective oncolytic effect. Previous investigations have demonstrated that colon cancer mice model treated with HF10 not only had better survival but were also resistant to the reimplantation of the antitumor effect mediated by host antitumor immunity. Importantly, it has also been noted that in mice with antitumors implanted on both sides of the back, an injection of HF10 on only one side strongly restrains not only the injected antitumor but also the non-injected ones.Materials and methods: MC26 colon cancer cells were injected subcutaneously into the back, spleen, and intraperitoneal region of metastasis model mice. Antitumor volume and survival rate were monitored. To measure cytotoxic T lymphocytes (CTL cytotoxicity against MC26, lymphocytes were extracted from the spleens of the peritoneal metastasis model mice as well as from the thymus of the liver metastasis model mice. The expression of interferon gamma was examined by enzyme-linked immunospot assay. Samples from the liver metastasis model mice were subjected to polymerase chain reaction to quantify the level of HSV genomes.Results: HF10 was injected only on the back antitumor; however, a antitumor-suppressor effect was observed against liver and peritoneal metastases. When HF10 genome was measured, we observed lower genome on liver metastases compared to back antitumor genome quantity. CTL activity against MC26 was also observed. These results indicate that local administration of HF10 exerts a curative effect on systemic disease, mediated by host antitumor immunity.Conclusion: HF10 local administration stimulates antitumor immunity to


    Directory of Open Access Journals (Sweden)

    Dwi Biyantoro


    Full Text Available ABSTRAK PEMISAHAN Zr – Hf SECARA SINAMBUNG MENGGUNAKANMIXER SETTLER. Telah dilakukan pemisahanZr – Hf secara sinambung menggunakan pengaduk pengenap (mixer settler 16 stage. Larutan umpan adalah zirkon nitrat dengan kadar Zr = 30786 ppm dan Hf = 499 ppm. Ekstraktan dipakai adalah solven 60 % TBP dalam kerosen dan larutan scrubbingyang dipakai adalah asam nitrat 1 M. Umpan masuk pada stageke 5 dikontakkan secara berlawanan arah dengan solven masuk pada stage ke 16 dan larutan scrubbing masuk pada stage ke 1. Tujuan penelitian ini adalah memisahkan unsur Zr dan Hf dari hasil olah pasir zirkon menggunakan solven TBP dengan alat mixer settler16 stage. Analisis umpan dan hasil proses pemisahan untuk zirkonium (Zr dilakukan dengan menggunakan alat pendar sinar-X, sedangkananalisis unsur hafnium (Hf menggunakan Analisis Pengaktifan Neutron (APN. Parameter penelitian dilakukan dengan variasi keasaman asam nitrat dalam umpan dan variasi waktu pada berbagai laju pengadukan. Hasil penelitian pemisahan unsur Zr dengan Hf diperolehkondisi optimum pada keasaman umpan 4 N HNO3, keseimbangan dicapai setelah 3jam dan laju pengadukan 3300 rpm. Hasil ekstrak  unsur zirkon (Zr diperoleh kadar sebesar 28577 ppm dengan efisiensi 92,76 % serta kadar pengotor hafnium (Hf sebesar 95 ppm. Kata Kunci: pemisahan Zr, Hf, ekstraksi, mixer settler, alat pendar sinar-X, APN. ABSTRACT SEPARATION of Zr - Hf CONTINUOUSLY USE THE MIXER SETTLER. Separation of Zr - Hf continuously using mixer settler 16 stage has been done. The feed solution is zircon nitrate concentration of Zr = 30786 ppm  and Hf = 499 ppm. As the solvent used extractant 60 % TBP in 40 % kerosene. Nitric acid solution used srubbing 1 M. The feed entered into stage to 5 is contacted with solvents direction on the stage to 16 and the scrubbing solution enter the stage to 1. The purpose of this study is to separate Zr and Hf of the results from the process of zircon sand using solvent TBP using 16 stage

  4. Epitaxial Thin Films of Y doped HfO2 (United States)

    Serrao, Claudy; Khan, Asif; Ramamoorthy, Ramesh; Salahuddin, Sayeef

    Hafnium oxide (HfO2) is one of a few metal oxides that is thermodynamically stable on silicon and silicon oxide. There has been renewed interest in HfO2 due to the recent discovery of ferroelectricity and antiferroelectricity in doped HfO2. Typical ferroelectrics - such as strontium bismuth tantalate (SBT) and lead zirconium titanate (PZT) - contain elements that easily react with silicon and silicon oxide at elevated temperatures; therefore, such ferroelectrics are not suited for device applications. Meanwhile, ferroelectric HfO2 offers promise regarding integration with silicon. The stable phase of HfO2 at room temperature is monoclinic, but HfO2 can be stabilized in the tetragonal, orthorhombic or even cubic phase by suitable doping. We stabilized Y-doped HfO2 thin films using pulsed laser deposition. The strain state can be controlled using various perovskite substrates and controlled growth conditions. We report on Y-doped HfO2 domain structures from piezo-response force microscopy (PFM) and structural parameters via X-ray reciprocal space maps (RSM). We hope this work spurs further interest in strain-tuned ferroelectricity in doped HfO2.

  5. Microstructural characterization of as-cast hf-b alloys

    Directory of Open Access Journals (Sweden)

    João Carlos Jânio Gigolotti


    Full Text Available An accurate knowledge of several metal-boron phase diagrams is important to evaluation of higher order systems such as metal-silicon-boron ternaries. The refinement and reassessment of phase diagram data is a continuous work, thus the reevaluation of metal-boron systems provides the possibility to confirm previous data from an investigation using higher purity materials and better analytical techniques. This work presents results of rigorous microstructural characterization of as-cast hafnium-boron alloys which are significant to assess the liquid composition associated to most of the invariant reactions of this system. Alloys were prepared by arc melting high purity hafnium (minimum 99.8% and boron (minimum 99.5% slices under argon atmosphere in water-cooled copper crucible with non consumable tungsten electrode and titanium getter. The phases were identified by scanning electron microscopy, using back-scattered electron image mode and X-ray diffraction. In general, a good agreement was found between our data and those from the currently accepted Hafnium-Boron phase diagram. The phases identified are αHfSS and B-RhomSS, the intermediate compounds HfB and HfB2 and the liquide L. The reactions are the eutectic L ⇔ αHfSS + HfB and L ⇔ HfB2 + B-Rhom, the peritectic L + HfB2 ⇔ HfB and the congruent formation of HfB2.

  6. A DFT study of temperature dependent dissociation mechanism of HF in HF(H2O)7 cluster

    Indian Academy of Sciences (India)

    Swatantra K Yadav; Hirdyesh Mishra; Ashwani K Tiwari


    We report a Density Functional Theoretical (DFT) study of dissociation of Hydrogen Fluoride (HF) in HF(H2O)7 cluster, using B3LYP functional and empirical exchange correlation functional M06-2X along with 6-31+G(d,p) basis set. Dissociation constant, KRP, of HF dissociation and pKa values of HF in cluster at various temperatures have been reported. It has been found that both KRP and pKa are highly dependent on temperature. The variation of pKa with temperature suggests that HF is strong acid at lower temperatures. Our study also reveals that HF is a stronger acid in water cluster than in bulk water. Further, the results obtained by DFT calculations have been compared with the earlier reported results obtained from Monte Carlo (MC) simulation. It is found that DFT results are qualitatively consistent with the results of MC simulation but quantitatively different.

  7. The Key Word Description of Automatic Attaining Page by Hypertext Link Analysis%利用超链分析自动获取网页的主题词描述

    Institute of Scientific and Technical Information of China (English)



    本文介绍超级链接(Hypertext Link)中超链文字的作用,探讨如何利用超链文字的信息自动获取网页文件的主题词描述,以及该算法在搜索引擎中的相关度评价(relevance judgement)中的重要作用.

  8. Hf-W chronometry of primitive achondrites (United States)

    Schulz, T.; Münker, C.; Mezger, K.; Palme, H.


    Metal segregation and silicate melting on asteroids are the most incisive differentiation events in the early evolution of planetary bodies. The timing of these events can be constrained using the short-lived 182Hf- 182W radionuclide system. Here we present new 182Hf- 182W data for major types of primitive achondrites including acapulcoites, winonaites and one lodranite. These meteorites are of particular interest because they show only limited evidence for partial melting of silicates and are therefore intermediate between chondrites and achondrites. For acapulcoites we derived a 182Hf- 182W age of Δ tCAI = 4.1 +1.2/ -1.1 Ma. A model age for winonaite separates calculated from the intercept of the isochron defines an age of Δ tCAI = 4.8 +3.1/ -2.6 Ma (assuming a bulk Hf/W ratio of ˜1.2). Both ages most likely define primary magmatic events on the respective parent bodies, such as melting of metal, although metal stayed in place and did not segregate to form a core. A later thermal event is responsible for resetting of the winonaite isochron, yielding an age of Δ tCAI = 14.3 +2.7/ -2.2 Ma, significantly younger than the model age. Assuming a co-genetic relationship between winonaites and silicates present in IAB iron meteorites (based on oxygen isotope composition) and including data by Schulz et al. (2009), a common parent body chronology can be established. Magmatic activity occurred between ˜1.5 and 5 Ma after CAIs. More than 5 Ma later, intensive thermal metamorphism has redistributed Hf-W. Average cooling rates calculated for the winonaite/IAB parent asteroid range between ˜35 and ˜4 K/Ma, most likely reflecting different burial depths. Cooling rates obtained for acapulcoites were ˜40 K/Ma to ˜720 K and then ˜3 K/Ma to ˜550 K. Accretion and subsequent magmatism on the acapulcoite parent body occurred slightly later if compared to most achondrite parent bodies (e.g., angrites, ureilites and eucrites), in this case supporting the concept of an inverse

  9. Pressure induced novel compounds in the Hf-O system from first-principles calculations



    Using first-principles evolutionary simulations, we have systematically investigated phase stability in the Hf-O system at pressure up to 120 GPa. New compounds Hf5O2, Hf3O2, HfO and HfO3 are discovered to be thermodynamically stable at certain pressure ranges and a new stable high-pressure phase is found for Hf2O with space group Pnnm and anti-CaCl2-type structure. Both P62m-HfO and P4m2-Hf2O3 show semimetallic character. Pnnm-HfO3 shows interesting structure, simultaneously containing oxide...

  10. Ferroelectricity of nondoped thin HfO2 films in TiN/HfO2/TiN stacks (United States)

    Nishimura, Tomonori; Xu, Lun; Shibayama, Shigehisa; Yajima, Takeaki; Migita, Shinji; Toriumi, Akira


    We report on the impact of TiN interfaces on the ferroelectricity of nondoped HfO2. Ferroelectric properties of nondoped HfO2 in TiN/HfO2/TiN stacks are shown in capacitance-voltage and polarization-voltage characteristics. The Curie temperature is also estimated to be around 500 °C. The ferroelectricity of nondoped HfO2 clearly appears by thinning HfO2 film down to ˜35 nm. We directly revealed in thermal treatments that the ferroelectric HfO2 film on TiN was maintained by covering the top surface of HfO2 with TiN, while it was followed by a phase transition to the paraelectric phase in the case of the open surface of HfO2. Thus, it is concluded that the ferroelectricity in nondoped HfO2 in this study was mainly driven by both of top and bottom TiN interfaces.

  11. Word Automaticity of Tree Automatic Scattered Linear Orderings Is Decidable

    CERN Document Server

    Huschenbett, Martin


    A tree automatic structure is a structure whose domain can be encoded by a regular tree language such that each relation is recognisable by a finite automaton processing tuples of trees synchronously. Words can be regarded as specific simple trees and a structure is word automatic if it is encodable using only these trees. The question naturally arises whether a given tree automatic structure is already word automatic. We prove that this problem is decidable for tree automatic scattered linear orderings. Moreover, we show that in case of a positive answer a word automatic presentation is computable from the tree automatic presentation.

  12. Scandinavian links

    DEFF Research Database (Denmark)

    Matthiessen, Christian Wichmann; Knowles, Richard D.


    centres, one joins more thinly populated regions, and the last one links peripheral areas. Two of them (The Great Belt Link and the Oresund Link) have been constructed and are in full operation. The third (the Fehmarnbelt Link) has been decided 2008 on bilateral government level. The three links...

  13. Synthesis of Freestanding HfO2 Nanostructures (United States)


    Tang J, Fabbri J, Robinson RD, Zhu Y, Herman IP, Steigerwald ML, Brus LE: Solid-solution nanoparticles:use of a nonhydrolytic sol-gel synthesis to...colloidal HfO2 nanorods. Adv Mater 2007, 19:2608-2612. Page 21 5. Qiu X, Howe JY, Cardoso MB, Polat O, Heller W: Size control of highly ordered HfO2

  14. Parametric excitation of whistler waves by HF heater (United States)

    Kuo, S. P.; Lee, M. C.


    Possible generation of whistler waves by Tromso HF heater is investigated. It is shown that the HF heater wave can parametrically decay into a whistler wave and a Langmuir wave. Since whistler waves may have a broad range of frequency, the simultaneously excited Langmuir waves can have a much broader frequency bandwidth than those excited by the parametric decay instability.

  15. Study of {sup 179}Hf{sup m2} excitation

    Energy Technology Data Exchange (ETDEWEB)

    Vishnevsky, I. N.; Zheltonozhsky, V. A., E-mail:; Savrasov, A. N. [National Academy of Sciences of Ukraine, Institute for Nuclear Research (Ukraine); Mazur, V. M. [National Academy of Sciences of Ukraine, Institute of Electronic Physics (Ukraine)


    Isomeric ratios of {sup 179}Hf{sup m2,g} yields in the (γ, n) reaction and the cross section for the {sup 179}Hf{sup m2} population in the (α, p) reaction are measured for the first time at the end-point energies of 15.1 and 17.5 MeV for bremsstrahlung photons and 26 MeV for alpha particles. The results are σ = (1.1 ± 0.11) × 10{sup −27} cm{sup 2} for the {sup 176}Lu(α, p){sup 179}Hf{sup m2} reaction and Y{sub m2}/Y{sub g} = (6.1 ± 0.3) × 10{sup −6} and (3.7 ± 0.2) × 10{sup −6} for the {sup 180}Hf(γ, n){sup 179}Hf{sup m22} reaction at E{sub ep} =15.1 and 17.5 MeV, respectively. The experimental data on the relative {sup 179}Hf{sup m2} yield indicate a single-humped shape of the excitation function for the {sup 180}Hf(γ, n){sup 179}Hf{sup m2} reaction. Simulation is performed using the TALYS-1.4 and EMPIRE-3.2 codes.

  16. Diffusion of Hf and Nb in Zr-19%Nb

    Energy Technology Data Exchange (ETDEWEB)

    Zou, H. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.; Hood, G.M. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.; Schultz, R.J. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.; Matsuura, N. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.; Roy, J.A. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.; Jackman, J.A. [CANMET, Ottawa, Ont. (Canada). Met. Sci. and Technol.


    Diffusion of Hf and Nb in large-grained bcc Zr-19%Nb has been studied. Diffusion coefficients of Hf, D(Hf), were measured in the range 620-1173 K and D(Nb) was measured at 920 and 1167 K. The Hf diffusion profiles were determined by SIMS and the Nb profiles by microtome sectioning and radio-tracer counting. The Hf data show a smooth, temperature-dependent behaviour through the monotectoid temperature, 875 K, and may be characterised by D{approx}10{sup -9}.exp-1.4 (eV/kT) m{sup 2}/s. D(Nb) tends to be lower than the corresponding values for D(Hf). Overall, diffusion of Hf and Nb are characteristic of diffusion in bcc Zr. Surface hold-up (oxide film) at low temperatures was overcome by using ion-implanted Hf diffusion sources. The results are compared with earlier work and discussed in terms of diffusion mechanisms and the {beta}-phase transformation of commercial Zr-2.5Nb. (orig.).

  17. The link in Linking (United States)

    Caldwell, Jane C; Chiale, Pablo A; Gonzalez, Mario D; Baranchuk, Adrian


    We present 2 cases of the slow-fast form of AVNRT with initially narrow QRS complexes followed by sudden unexpected transition to persistently wide QRS complexes due to aberrant intraventricular conduction. Introduction of a properly timed extrastimulus in one case and critical oscillations in cycle length due to short-long coupling in the second case set the stage for the initial bundle branch block. However, persistence of the aberrancy pattern once the initial event abated was maintained by the "linking" phenomenon. Delayed, retrograde concealed activation from the contralateral bundle branch perpetuated the initial bundle branch block. PMID:23840106

  18. Automatic modulation classification principles, algorithms and applications

    CERN Document Server

    Zhu, Zhechen


    Automatic Modulation Classification (AMC) has been a key technology in many military, security, and civilian telecommunication applications for decades. In military and security applications, modulation often serves as another level of encryption; in modern civilian applications, multiple modulation types can be employed by a signal transmitter to control the data rate and link reliability. This book offers comprehensive documentation of AMC models, algorithms and implementations for successful modulation recognition. It provides an invaluable theoretical and numerical comparison of AMC algo

  19. Using Protege for Automatic Ontology Instantiation



    This paper gives an overview on the use of Protégé in the Artequakt system, which integrated Protégé with a set of natural language tools to automatically extract knowledge about artists from web documents and instantiate a given ontology. Protégé was also linked to structured templates that generate documents from the knowledge fragments it maintains.

  20. Oxygen Recovery in Hf Oxide Films Fabricated by Sputtering

    Institute of Scientific and Technical Information of China (English)

    JIANG Ran; LI Zi-Feng


    The chemical structure of ultrathin Hf oxide films (< 10 nm) fabricated by a standard sputtering method is investigated using x-ray spectroscopy and Rutherford backscattering spectroscopy. According to the experiments,oxygen species are impacted to the HfO2/Si interface during the initial sputtering, and then released back to the upper Hf02 region driven by the oxygen concentration grads. A vacuum annealing can greatly enhance this recovery process. Additionally, significant SiO2 reduction in the interface is observed after the vacuum annealing for the thick HfO2 films in our experiment. It might be an effective method to confine the interracial layer thickness by sputtering thick HfO2 in no-oxygen ambient.

  1. Crystal structure of Si-doped HfO2 (United States)

    Zhao, Lili; Nelson, Matthew; Aldridge, Henry; Iamsasri, Thanakorn; Fancher, Chris M.; Forrester, Jennifer S.; Nishida, Toshikazu; Moghaddam, Saeed; Jones, Jacob L.


    Si-doped HfO2 was prepared by solid state synthesis of the starting oxides. Using Rietveld refinement of high resolution X-ray diffraction patterns, a substitutional limit of Si in HfO2 was determined as less than 9 at. %. A second phase was identified as Cristobalite (SiO2) rather than HfSiO4, the latter of which would be expected from existing SiO2-HfO2 phase diagrams. Crystallographic refinement with increased Si-dopant concentration in monoclinic HfO2 shows that c/b increases, while β decreases. The spontaneous strain, which characterizes the ferroelastic distortion of the unit cell, was calculated and shown to decrease with increasing Si substitution.

  2. The (178m2)Hf Controversy

    Energy Technology Data Exchange (ETDEWEB)

    Becker, J A; Gemmell, D S; Schiffer, J P; Wilhelmy, J B


    Since its discovery in the 1960's the {sup 178m2}Hf isomer has garnered high attention from both the basic and applied communities in nuclear science. It's combination of high spin (16+), long half life (31 yrs), and high excitation energy (2.446 MeV) offer unique possibilities as an energy storage medium. Interest in the isomer was rekindled beginning in 1999 when a series of publications began to appear from a group (referred to here as the ''Texas collaboration'') primarily based at the University of Texas, Dallas [1]. They reported observations that some of the stored energy could be released (''triggered'') when the isomer was exposed to a fluence of photons in the energy range {approx}10 to {approx}60 keV. The implications of this observation are profound. Even though the claimed cross section for the process was {approx}7 orders of magnitude greater than would be predicted from the known systematics of photon absorption by nuclei in this mass range [2], such a highly efficient method for triggering the isomeric deexcitation immediately suggested applications utilizing the explosive or the controlled gradual energy release from a very compact source. The prospect of such applications has focused considerable interest on realizing the promise that is implicit in the reported observations. However, two experiments performed by a group from ANL/LANL/LLNL at the Advanced Photon Source at Argonne (the ''APS collaboration'') reported negative results for the observation of any photon-triggered deexcitation of the {sup 178m2}Hf isomer [3]. This has led to a continued controversy, where both sides have adamantly defended their observations. At this point an outsider has difficulty determining whether there is indeed a triggering effect that should be pursued energetically with substantial resources, or whether the phenomenon consists of overly optimistic interpretation of data.

  3. Ferroelectricity-modulated resistive switching in Pt/Si:HfO2/HfO2-x /Pt memory (United States)

    Ran, Jiang; Xianghao, Du; Zuyin, Han


    It is investigated for the effect of a ferroelectric Si:HfO2 thin film on the resistive switching in a stacked Pt/Si:HfO2/highly-oxygen-deficient HfO2-x /Pt structure. Improved resistance performance was observed. It was concluded that the observed resistive switching behavior was related to the modulation of the width and height of a depletion barrier in the HfO2-x layer, which was caused by the Si:HfO2 ferroelectric polarization field effect. Reliable switching reproducibility and long data retention were observed in these memory cells, suggesting their great potential in non-volatile memories applications with full compatibility and simplicity. Project supported by the National Natural Science Foundation of China (No. 11374182), the Natural Science Foundation of Shandong Province (No. ZR2012FQ012), and the Jinan Independent Innovation Projects of Universities (No. 201303019).

  4. Multipath Separation-Direction of Arrival (MS-DOA) with Genetic Search Algorithm for HF channels (United States)

    Arikan, Feza; Koroglu, Ozan; Fidan, Serdar; Arikan, Orhan; Guldogan, Mehmet B.


    Direction-of-Arrival (DOA) defines the estimation of arrival angles of an electromagnetic wave impinging on a set of sensors. For dispersive and time-varying HF channels, where the propagating wave also suffers from the multipath phenomena, estimation of DOA is a very challenging problem. Multipath Separation-Direction of Arrival (MS-DOA), that is developed to estimate both the arrival angles in elevation and azimuth and the incoming signals at the output of the reference antenna with very high accuracy, proves itself as a strong alternative in DOA estimation for HF channels. In MS-DOA, a linear system of equations is formed using the coefficients of the basis vector for the array output vector, the incoming signal vector and the array manifold. The angles of arrival in elevation and azimuth are obtained as the maximizers of the sum of the magnitude squares of the projection of the signal coefficients on the column space of the array manifold. In this study, alternative Genetic Search Algorithms (GA) for the maximizers of the projection sum are investigated using simulated and experimental ionospheric channel data. It is observed that GA combined with MS-DOA is a powerful alternative in online DOA estimation and can be further developed according to the channel characteristics of a specific HF link.

  5. Automatic Program Development

    DEFF Research Database (Denmark)

    by members of the IFIP Working Group 2.1 of which Bob was an active member. All papers are related to some of the research interests of Bob and, in particular, to the transformational development of programs and their algorithmic derivation from formal specifications. Automatic Program Development offers......Automatic Program Development is a tribute to Robert Paige (1947-1999), our accomplished and respected colleague, and moreover our good friend, whose untimely passing was a loss to our academic and research community. We have collected the revised, updated versions of the papers published in his...... honor in the Higher-Order and Symbolic Computation Journal in the years 2003 and 2005. Among them there are two papers by Bob: (i) a retrospective view of his research lines, and (ii) a proposal for future studies in the area of the automatic program derivation. The book also includes some papers...

  6. Automatic text summarization

    CERN Document Server

    Torres Moreno, Juan Manuel


    This new textbook examines the motivations and the different algorithms for automatic document summarization (ADS). We performed a recent state of the art. The book shows the main problems of ADS, difficulties and the solutions provided by the community. It presents recent advances in ADS, as well as current applications and trends. The approaches are statistical, linguistic and symbolic. Several exemples are included in order to clarify the theoretical concepts.  The books currently available in the area of Automatic Document Summarization are not recent. Powerful algorithms have been develop

  7. Automatic Camera Control

    DEFF Research Database (Denmark)

    Burelli, Paolo; Preuss, Mike


    Automatically generating computer animations is a challenging and complex problem with applications in games and film production. In this paper, we investigate howto translate a shot list for a virtual scene into a series of virtual camera configurations — i.e automatically controlling the virtual...... camera. We approach this problem by modelling it as a dynamic multi-objective optimisation problem and show how this metaphor allows a much richer expressiveness than a classical single objective approach. Finally, we showcase the application of a multi-objective evolutionary algorithm to generate a shot...

  8. Magmatic and crustal differentiation history of granitic rocks from Hf-O isotopes in zircon. (United States)

    Kemp, A I S; Hawkesworth, C J; Foster, G L; Paterson, B A; Woodhead, J D; Hergt, J M; Gray, C M; Whitehouse, M J


    Granitic plutonism is the principal agent of crustal differentiation, but linking granite emplacement to crust formation requires knowledge of the magmatic evolution, which is notoriously difficult to reconstruct from bulk rock compositions. We unlocked the plutonic archive through hafnium (Hf) and oxygen (O) isotope analysis of zoned zircon crystals from the classic hornblende-bearing (I-type) granites of eastern Australia. This granite type forms by the reworking of sedimentary materials by mantle-like magmas instead of by remelting ancient metamorphosed igneous rocks as widely believed. I-type magmatism thus drives the coupled growth and differentiation of continental crust.

  9. Power-Stepped HF Cross Modulation Experiments at HAARP (United States)

    Greene, S.; Moore, R. C.; Langston, J. S.


    High frequency (HF) cross modulation experiments are a well established means for probing the HF-modified characteristics of the D-region ionosphere. In this paper, we apply experimental observations of HF cross-modulation to the related problem of ELF/VLF wave generation. HF cross-modulation measurements are used to evaluate the efficiency of ionospheric conductivity modulation during power-stepped modulated HF heating experiments. The results are compared to previously published dependencies of ELF/VLF wave amplitude on HF peak power. The experiments were performed during the March 2013 campaign at the High Frequency Active Auroral Research Program (HAARP) Observatory. HAARP was operated in a dual-beam transmission format: the first beam heated the ionosphere using sinusoidal amplitude modulation while the second beam broadcast a series of low-power probe pulses. The peak power of the modulating beam was incremented in 1-dB steps. We compare the minimum and maximum cross-modulation effect and the amplitude of the resulting cross-modulation waveform to the expected power-law dependence of ELF/VLF wave amplitude on HF power.

  10. Linking human factors to corporate strategy with cognitive mapping techniques. (United States)

    Village, Judy; Greig, Michael; Salustri, Filippo A; Neumann, W Patrick


    For human factors (HF) to avoid being considered of "side-car" status, it needs to be positioned within the organization in such a way that it affects business strategies and their implementation. Tools are needed to support this effort. This paper explores the feasibility of applying a technique from operational research called cognitive mapping to link HF to corporate strategy. Using a single case study, a cognitive map is drawn to reveal the complex relationships between human factors and achieving an organization's strategic goals. Analysis of the map for central concepts and reinforcing loops enhances understanding that can lead to discrete initiatives to facilitate integration of HF. It is recommended that this technique be used with senior managers to understand the organizations` strategic goals and enhance understanding of the potential for HF to contribute to the strategic goals.

  11. HF dissociation in water clusters by computer simulations


    Elena, Alin Marin


    We perform Restrained hybrid Monte Carlo simulations to compute the equilibrium constant of the dissociation reaction of HF in HF(H2O)7. We find that, like in the bulk, hydrofluoric acid, is a weak acid also in the cubic HF(H2O)7 cluster, and that its acidity is higher at lower T. This latter phenomenon has a (vibrational) entropic origin, namely it is due to the reduction of the (negative) T∆S contribution to the variation of free energy between the reactant and product. We found also ...

  12. Exploring Automatization Processes. (United States)

    DeKeyser, Robert M.


    Presents the rationale for and the results of a pilot study attempting to document in detail how automatization takes place as the result of different kinds of intensive practice. Results show that reaction times and error rates gradually decline with practice, and the practice effect is skill-specific. (36 references) (CK)

  13. Automatic Complexity Analysis

    DEFF Research Database (Denmark)

    Rosendahl, Mads


    One way to analyse programs is to to derive expressions for their computational behaviour. A time bound function (or worst-case complexity) gives an upper bound for the computation time as a function of the size of input. We describe a system to derive such time bounds automatically using abstrac...

  14. Brut: Automatic bubble classifier (United States)

    Beaumont, Christopher; Goodman, Alyssa; Williams, Jonathan; Kendrew, Sarah; Simpson, Robert


    Brut, written in Python, identifies bubbles in infrared images of the Galactic midplane; it uses a database of known bubbles from the Milky Way Project and Spitzer images to build an automatic bubble classifier. The classifier is based on the Random Forest algorithm, and uses the WiseRF implementation of this algorithm.

  15. Automatic Dance Lesson Generation (United States)

    Yang, Yang; Leung, H.; Yue, Lihua; Deng, LiQun


    In this paper, an automatic lesson generation system is presented which is suitable in a learning-by-mimicking scenario where the learning objects can be represented as multiattribute time series data. The dance is used as an example in this paper to illustrate the idea. Given a dance motion sequence as the input, the proposed lesson generation…

  16. Decoupling of whole-rock Nd-Hf and zircon Hf-O isotopic compositions of a 284 Ma mafic-ultramafic intrusion in the Beishan Terrane, NW China (United States)

    Su, Ben-Xun; Qin, Ke-Zhang; Lu, Ying-Huai; Sun, He; Sakyi, Patrick Asamoah


    Abundant Permian mafic-ultramafic intrusions in the Beishan Terrane, NW China, are parts of the Tarim large igneous province. Among these intrusions, Luodong intrusion is composed of dunite, wehrlite and gabbro. These rocks have whole-rock Sr-Nd-Hf and zircon Hf-O isotope compositions that display significant decoupling. The decoupling of these generally well-correlated systems demonstrates contrasting evolving trends. Systematic compositional and mineralogical controls on decoupling have been investigated. Wehrlites and gabbros show MORB-like trace element patterns with negligible crustal contamination. They have high initial 143Nd/144Nd [ɛNd(t) = +6.6 to +11.2] and 176Hf/177HfHf(t) = +12.2 to +16.9] and low initial 87Sr/86Sr [(87Sr/86Sr)i = 0.702949-0.704098] ratios and plot within the MORB field, indicating that their parental magmas were derived from a depleted mantle source. The enrichment features are present in the zircon crystals separated from the gabbro. These homogeneously unzoned zircon crystals have high U concentrations, low Th/U ratios and a U-Pb age of 284.0 ± 2.3 Ma. They are therefore interpreted as having formed rapidly in a highly fractionated/evolved magma. Their ɛHf(t) and δ18O values range from -9.3 to -6.7 and +10.25 ‰ to +11.42 ‰, respectively. The decoupling is linked with crustal contamination by ancient crust (probably Proterozoic schist in the Beishan Terrane) that occurred during zircon crystallization. However, the contamination signature in the whole-rock composition was soon overprinted by magma mixing process. The inference is evidenced by zoning textures preserved in plagioclase, clinopyroxene, spinel and particularly olivine, and the presence of coeval diabase dykes cutting through the intrusion. The isotope decoupling observed in this mantle-plume-related mafic-ultramafic intrusion supports the idea that Nd-Hf decoupling and Lu/Hf and Sm/Nd parent/daughter variations exist only on a small hand-size scale in a

  17. Automaticity and Reading: Perspectives from the Instance Theory of Automatization. (United States)

    Logan, Gordon D.


    Reviews recent literature on automaticity, defining the criteria that distinguish automatic processing from non-automatic processing, and describing modern theories of the underlying mechanisms. Focuses on evidence from studies of reading and draws implications from theory and data for practical issues in teaching reading. Suggests that…

  18. Ionospheric heating with oblique HF waves (United States)

    Field, Edward C., Jr.; Bloom, Ron M.


    Calculations of ionospheric electron density perturbations and ground-level signal changes produce by intense oblique high frequency (HF) transmitters are presented. This analysis considers radio field focusing at caustics, the consequent joule-heating of the surrounding plasma, heat conduction, diffusion, and recombination processes: these being the effects of a powerful oblique 'modifying' wave. It neglects whatever plasma instabilities might occur. Then effects on a secondary 'test' wave that is propagated along the same path as the first are investigated. Calculations predict ground-level field-strength reductions of several dB in the test wave for modifying waves having ERP in the 85 to 90 dBW range. These field-strength changes are similar in sign, magnitude, and location to ones measured in Soviet experiments. The results are sensitive to the model ionosphere assumed, so future experiments should employ the widest possible range of frequencies and propagation conditions. An effective power of 90 dBW seems to be a sort of threshold that, if exceeded, results in substantial rather than small signal changes. The conclusions are based solely on joule-heating and subsequent defocusing of waves passing through caustic regions.

  19. Process Simulation Analysis of HF Stripping

    Directory of Open Access Journals (Sweden)

    Thaer A. Abdulla


    Full Text Available    HYSYS process simulator is used for the analysis of existing HF stripping column in LAB plant (Arab Detergent Company, Baiji-Iraq. Simulated column performance and profiles curves are constructed. The variables considered are the thermodynamic model option, bottom temperature, feed temperature, and column profiles for the temperature, vapor flow rate, liquid flow rate and composition. The five thermodynamic models options used (Margules, UNIQUAC, van laar, Antoine, and Zudkevitch-Joffee, affecting the results within (0.1-58% variation for the most cases.        The simulated results show that about 4% of paraffin (C10 & C11 presents at the top stream, which may cause a problem in the LAB production plant. The major variations were noticed for the total top vapor flow rate with bottom temperature and with feed composition. The column profiles maintain fairly constants from tray 5 to tray 18. The study gives evidence about a successful simulation with HYSYS because the results correspond with the real plant operation data.

  20. The (178m2) Hf Controversy

    CERN Document Server

    Becker, J A; Schiffer, J P; Wilhelmy, J


    Since its discovery in the 1960's the sup 1 sup 7 sup 8 sup m sup 2 Hf isomer has garnered high attention from both the basic and applied communities in nuclear science. It's combination of high spin (16+), long half life (31 yrs), and high excitation energy (2.446 MeV) offer unique possibilities as an energy storage medium. Interest in the isomer was rekindled beginning in 1999 when a series of publications began to appear from a group (referred to here as the ''Texas collaboration'') primarily based at the University of Texas, Dallas [1]. They reported observations that some of the stored energy could be released (''triggered'') when the isomer was exposed to a fluence of photons in the energy range approx 10 to approx 60 keV. The implications of this observation are profound. Even though the claimed cross section for the process was approx 7 orders of magnitude greater than would be predicted from the known systematics of photon absorption by nuclei in this mass range [2], such a highly efficient method fo...

  1. Grindability of cast Ti-Hf alloys. (United States)

    Kikuchi, Masafumi; Takahashi, Masatoshi; Sato, Hideki; Okuno, Osamu; Nunn, Martha E; Okabe, Toru


    As part of our systematic studies characterizing the properties of titanium alloys, we investigated the grindability of a series of cast Ti-Hf alloys. Alloy buttons with hafnium concentrations up to 40 mass% were made using an argon-arc melting furnace. Each button was cast into a magnesia-based mold using a dental titanium casting machine; three specimens were made for each metal. Prior to testing, the hardened surface layer was removed. The specimens were ground at five different speeds for 1 min at 0.98 N using a carborundum wheel on an electric dental handpiece. Grindability was evaluated as the volume of metal removed per minute (grinding rate) and the volume ratio of metal removed compared to the wheel material lost (grinding ratio). The data were analyzed using ANOVA. A trend of increasing grindability was found with increasing amounts of hafnium, although there was no statistical difference in the grindability with increasing hafnium contents. We also found that hafnium may be used to harden or strengthen titanium without deteriorating the grindability.

  2. The magnetic properties of $^{\\rm 177}$Hf and $^{\\rm 180}$Hf in the strong coupling deformed model


    Muto, S.; Stone, N. J.; Bingham, C. R.; STONE, J.R; Walker, P. M.; Audi, G.; Gaulard, C.; Köster, U.(Institut Laue-Langevin (ILL), Grenoble, France); Nikolov, J.; Nishimura,K; Ohtsubo, T.; Podolyak, Z.; Risegari, L.; Simpson, G.S.; Veskovic, M.


    This paper reports NMR measurements of the magnetic dipole moments of two high-K isomers, the 37/2$^-$, 51.4 m, 2740 keV state in $^{\\rm 177}$Hf and the 8$^-$, 5.5 h, 1142 keV state in $^{\\rm 180}$Hf by the method of on-line nuclear orientation. Also included are results on the angular distributions of gamma transitions in the decay of the $^{\\rm 177}$Hf isotope. These yield high precision E2/M1 multipole mixing ratios for transitions in bands built on the 23/2$^+$, 1.1 s, isomer at 1315 keV ...

  3. A thirty second isomer in {sup 171}Hf

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, P.; Billowes, J.; Cooper, T.G.; Grant, I.S.; Pearson, M.R.; Wheeler, P.D. [Schuster Laboratory, University of Manchester, M13 9PL (United Kingdom); Cochrane, E.C.A.; Cooke, J.L.; Evans, D.E.; Griffith, J.A.R.; Persson, J.R.; Richardson, D.S.; Tungate, G.; Zybert, L. [School of Physics and Space Research, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); Dendooven, P.; Honkanen, A.; Huhta, M.; Oinonen, M.; Penttilae, H.; Aeystoe, J. [Accelerator Laboratory, University of Jyvaeskylae, PL 35 Jyvaeskylae SF-403 51 (Finland)


    An isomer has been detected in {sup 171}Hf with a half-life of T{sub 1/2} 29.5(9) s. The state was populated in the {sup 170}Yb({alpha},3n){sup 171m}Hf reaction at a beam energy of E{sub {alpha}} = 50 MeV in an on-line ion guide isotope separator. The isomeric {sup 171m}Hf{sup +} beam was extracted from the ion guide, mass-analysed and implanted in the surface of a microchannel-plate. The half-life of the collected activity was measured from the decay of the microchannel-plate count rate. We associate the isomer with the first excited state in {sup 171}Hf with spin 1/2{sup -} at an excitation energy of 22(2) keV. (author)

  4. HF fiber stuffing in building 186 at CERN

    CERN Multimedia

    Tiziano Camporesi


    Each of the 36 HF wedges comprise ca 12000 quartz fibers which are the active element of the calorimeter. The fibers are produced by Polymicro (USA), cleaved and bundled at KFKI, Budapest, Hungary and inserted at CERN.

  5. Low-Frequency Waves in HF Heating of the Ionosphere (United States)

    Sharma, A. S.; Eliasson, B.; Milikh, G. M.; Najmi, A.; Papadopoulos, K.; Shao, X.; Vartanyan, A.


    Ionospheric heating experiments have enabled an exploration of the ionosphere as a large-scale natural laboratory for the study of many plasma processes. These experiments inject high-frequency (HF) radio waves using high-power transmitters and an array of ground- and space-based diagnostics. This chapter discusses the excitation and propagation of low-frequency waves in HF heating of the ionosphere. The theoretical aspects and the associated models and simulations, and the results from experiments, mostly from the HAARP facility, are presented together to provide a comprehensive interpretation of the relevant plasma processes. The chapter presents the plasma model of the ionosphere for describing the physical processes during HF heating, the numerical code, and the simulations of the excitation of low-frequency waves by HF heating. It then gives the simulations of the high-latitude ionosphere and mid-latitude ionosphere. The chapter also briefly discusses the role of kinetic processes associated with wave generation.

  6. Near-infrared LIF spectroscopy of HfF

    CERN Document Server

    Grau, Matt; Loh, Huanqian; Sinclair, Laura C; Stutz, Russel P; Yahn, Tylser S; Cornell, Eric A


    The molecular ion HfF$^+$ is the chosen species for a JILA experiment to measure the electron electric dipole moment (eEDM). Detailed knowledge of the spectrum of HfF is crucial to prepare HfF$^+$ in a state suitable for performing an eEDM measurement\\cite{Leanhardt}. We investigated the near-infrared electronic spectrum of HfF using laser-induced fluorescence (LIF) of a supersonic molecular beam. We discovered eight unreported bands, and assign each of them unambiguously, four to vibrational bands belonging to the transition $[13.8]0.5 \\leftarrow X1.5$, and four to vibrational bands belonging to the transition $[14.2]1.5 \\leftarrow X1.5$. Additionally, we report an improved measurement of vibrational spacing of the ground state, as well as anharmonicity $\\omega_e x_e$.

  7. Theoretical Assessment of 178m2Hf De-Excitation

    Energy Technology Data Exchange (ETDEWEB)

    Hartouni, E P; Chen, M; Descalle, M A; Escher, J E; Loshak, A; Navratil, P; Ormand, W E; Pruet, J; Thompson, I J; Wang, T F


    This document contains a comprehensive literature review in support of the theoretical assessment of the {sup 178m2}Hf de-excitation, as well as a rigorous description of controlled energy release from an isomeric nuclear state.

  8. Synthesis of freestanding HfO2 nanostructures

    Directory of Open Access Journals (Sweden)

    Boyle Kayla


    Full Text Available Abstract Two new methods for synthesizing nanostructured HfO2 have been developed. The first method entails exposing HfTe2 powders to air. This simple process resulted in the formation of nanometer scale crystallites of HfO2. The second method involved a two-step heating process by which macroscopic, freestanding nanosheets of HfO2 were formed as a byproduct during the synthesis of HfTe2. These highly two-dimensional sheets had side lengths measuring up to several millimeters and were stable enough to be manipulated with tweezers and other instruments. The thickness of the sheets ranged from a few to a few hundred nanometers. The thinnest sheets appeared transparent when viewed in a scanning electron microscope. It was found that the presence of Mn enhanced the formation of HfO2 by exposure to ambient conditions and was necessary for the formation of the large scale nanosheets. These results present new routes to create freestanding nanostructured hafnium dioxide. PACS: 81.07.-b, 61.46.Hk, 68.37.Hk.

  9. The isobutylene-isobutane alkylation process in liquid HF revisited. (United States)

    Esteves, P M; Araújo, C L; Horta, B A C; Alvarez, L J; Zicovich-Wilson, C M; Ramírez-Solís, A


    Details on the mechanism of HF catalyzed isobutylene-isobutane alkylation were investigated. On the basis of available experimental data and high-level quantum chemical calculations, a detailed reaction mechanism is proposed taking into account solvation effects of the medium. On the basis of our computational results, we explain why the density of the liquid media and stirring rates are the most important parameters to achieve maximum yield of alkylate, in agreement with experimental findings. The ab initio Car-Parrinello molecular dynamics calculations show that isobutylene is irreversibly protonated in the liquid HF medium at higher densities, leading to the ion pair formation, which is shown to be a minimum on the potential energy surface after optimization using periodic boundary conditions. The HF medium solvates preferentially the fluoride anion, which is found as solvated [FHF](-) or solvated F(-.)(HF)(3). On the other hand, the tert-butyl cation is weakly solvated, where the closest HF molecules appear at a distance of about 2.9 Angstrom with the fluorine termination of an HF chain.

  10. Hf impurity and defect interactions in helium-implanted NiHf

    Energy Technology Data Exchange (ETDEWEB)

    Govindaraj, R. E-mail:; Gopinathan, K.P.; Viswanathan, B


    TDPAC measurements on the reference and untreated sample indicate a loss in anisotropy which is attributed mainly to the association of probe atoms with defects produced by (n,{gamma}) reactions with isotopes of Ni and experiencing combined magnetic and quadrupole interactions of comparable strengths. Evolution of defect free and substitutional fraction of probe atoms experiencing Larmor frequency characteristic of Ni matrix has been studied as a function of isochronal annealing temperature in helium free {alpha}-irradiated and homogeneously helium-implanted samples. No defect associated Larmor precession frequency and/or quadrupole frequency could be deduced in these uncorrelated damage studies. Comparison of recovery stages in {alpha}-irradiated and helium-implanted samples indicates the binding of helium associated defects by Hf impurities. Segregation of Hf atoms is observed in the helium free {alpha}-irradiated sample for annealing treatment at 973 K, while no such effect is observed in the helium-implanted sample for isochronal annealing treatments up to 1273 K.

  11. Automatic Ultrasound Scanning

    DEFF Research Database (Denmark)

    Moshavegh, Ramin

    Medical ultrasound has been a widely used imaging modality in healthcare platforms for examination, diagnostic purposes, and for real-time guidance during surgery. However, despite the recent advances, medical ultrasound remains the most operator-dependent imaging modality, as it heavily relies...... on the user adjustments on the scanner interface to optimize the scan settings. This explains the huge interest in the subject of this PhD project entitled “AUTOMATIC ULTRASOUND SCANNING”. The key goals of the project have been to develop automated techniques to minimize the unnecessary settings...... on the scanners, and to improve the computer-aided diagnosis (CAD) in ultrasound by introducing new quantitative measures. Thus, four major issues concerning automation of the medical ultrasound are addressed in this PhD project. They touch upon gain adjustments in ultrasound, automatic synthetic aperture image...

  12. Automatic trend estimation

    CERN Document Server

    Vamos¸, C˘alin


    Our book introduces a method to evaluate the accuracy of trend estimation algorithms under conditions similar to those encountered in real time series processing. This method is based on Monte Carlo experiments with artificial time series numerically generated by an original algorithm. The second part of the book contains several automatic algorithms for trend estimation and time series partitioning. The source codes of the computer programs implementing these original automatic algorithms are given in the appendix and will be freely available on the web. The book contains clear statement of the conditions and the approximations under which the algorithms work, as well as the proper interpretation of their results. We illustrate the functioning of the analyzed algorithms by processing time series from astrophysics, finance, biophysics, and paleoclimatology. The numerical experiment method extensively used in our book is already in common use in computational and statistical physics.

  13. Reconciliation of the excess 176Hf conundrum in meteorites: Recent disturbances of the Lu-Hf and Sm-Nd isotope systematics (United States)

    Bast, Rebecca; Scherer, Erik E.; Sprung, Peter; Mezger, Klaus; Fischer-Gödde, Mario; Taetz, Stephan; Böhnke, Mischa; Schmid-Beurmann, Hinrich; Münker, Carsten; Kleine, Thorsten; Srinivasan, Gopalan


    The long-lived 176Lu-176Hf and 147Sm-143Nd radioisotope systems are commonly used chronometers, but when applied to meteorites, they can reveal disturbances. Specifically, Lu-Hf isochrons commonly yield dates up to ∼300 Myr older than the solar system and varying initial 176Hf/177Hf values. We investigated this problem by attempting to construct mineral and whole rock isochrons for eucrites and angrites. Meteorites from different parent bodies exhibit similar disturbance features suggesting that a common process is responsible. Minerals scatter away from isochron regressions for both meteorite classes, with low-Hf phases such as plagioclase and olivine typically being most displaced above (or left of) reference isochrons. Relatively Hf-rich pyroxene is less disturbed but still to the point of steepening Lu-Hf errorchrons. Using our Lu-Hf and Sm-Nd data, we tested various Hf and Lu redistribution scenarios and found that decoupling of Lu/Hf from 176Hf/177Hf must postdate the accumulation of significant radiogenic 176Hf. Therefore early irradiation or diffusion cannot explain the excess 176Hf. Instead, disturbed meteorite isochrons are more likely caused by terrestrial weathering, contamination, or common laboratory procedures. The partial dissolution of phosphate minerals may predominantly remove rare earth elements including Lu, leaving relatively immobile and radiogenic Hf behind. Robust Lu-Hf (and improved Sm-Nd) meteorite geochronology will require the development of chemical or physical methods for removing unsupported radiogenic Hf and silicate-hosted terrestrial contaminants without disturbing parent-daughter ratios.

  14. Tracking magmatic processes through Zr/Hf ratios in rocks and Hf and Ti zoning in zircons: An example from the Spirit Mountain batholith, Nevada (United States)

    Lowery, Claiborne L.E.; Miller, C.F.; Walker, B.A.; Wooden, J.L.; Mazdab, F.K.; Bea, F.


    Zirconium and Hf are nearly identical geochemically, and therefore most of the crust maintains near-chondritic Zr/Hf ratios of ???35-40. By contrast, many high-silica rhyolites and granites have anomalously low Zr/Hf (15-30). As zircon is the primary reservoir for both Zr and Hf and preferentially incorporates Zr, crystallization of zircon controls Zr/ Hf, imprinting low Zr/Hf on coexisting melt. Thus, low Zr/Hf is a unique fingerprint of effective magmatic fractionation in the crust. Age and compositional zonation in zircons themselves provide a record of the thermal and compositional histories of magmatic systems. High Hf (low Zr/ Hf) in zircon zones demonstrates growth from fractionated melt, and Ti provides an estimate of temperature of crystallization (TTiZ) (Watson and Harrison, 2005). Whole-rock Zr/Hf and zircon zonation in the Spirit Mountain batholith, Nevada, document repeated fractionation and thermal fluctuations. Ratios of Zr/Hf are ???30-40 for cumulates and 18-30 for high-SiO2 granites. In zircons, Hf (and U) are inversely correlated with Ti, and concentrations indicate large fluctuations in melt composition and TTiZ (>100??C) for individual zircons. Such variations are consistent with field relations and ion-probe zircon geochronology that indicate a >1 million year history of repeated replenishment, fractionation, and extraction of melt from crystal mush to form the low Zr/Hf high-SiO2 zone. ?? 2006 The Mineralogical Society.

  15. Automatic food decisions

    DEFF Research Database (Denmark)

    Mueller Loose, Simone

    Consumers' food decisions are to a large extent shaped by automatic processes, which are either internally directed through learned habits and routines or externally influenced by context factors and visual information triggers. Innovative research methods such as eye tracking, choice experiments...... and food diaries allow us to better understand the impact of unconscious processes on consumers' food choices. Simone Mueller Loose will provide an overview of recent research insights into the effects of habit and context on consumers' food choices....

  16. Automatic food decisions

    DEFF Research Database (Denmark)

    Mueller Loose, Simone

    Consumers' food decisions are to a large extent shaped by automatic processes, which are either internally directed through learned habits and routines or externally influenced by context factors and visual information triggers. Innovative research methods such as eye tracking, choice experiments...... and food diaries allow us to better understand the impact of unconscious processes on consumers' food choices. Simone Mueller Loose will provide an overview of recent research insights into the effects of habit and context on consumers' food choices....

  17. Automatization of lexicographic work

    Directory of Open Access Journals (Sweden)

    Iztok Kosem


    Full Text Available A new approach to lexicographic work, in which the lexicographer is seen more as a validator of the choices made by computer, was recently envisaged by Rundell and Kilgarriff (2011. In this paper, we describe an experiment using such an approach during the creation of Slovene Lexical Database (Gantar, Krek, 2011. The corpus data, i.e. grammatical relations, collocations, examples, and grammatical labels, were automatically extracted from 1,18-billion-word Gigafida corpus of Slovene. The evaluation of the extracted data consisted of making a comparison between the time spent writing a manual entry and a (semi-automatic entry, and identifying potential improvements in the extraction algorithm and in the presentation of data. An important finding was that the automatic approach was far more effective than the manual approach, without any significant loss of information. Based on our experience, we would propose a slightly revised version of the approach envisaged by Rundell and Kilgarriff in which the validation of data is left to lower-level linguists or crowd-sourcing, whereas high-level tasks such as meaning description remain the domain of lexicographers. Such an approach indeed reduces the scope of lexicographer’s work, however it also results in the ability of bringing the content to the users more quickly.

  18. Determination of isothermal section of Ni-Re-Hf ternary system at 1173 K

    Institute of Scientific and Technical Information of China (English)

    王日初; 柳春雷; 金展鹏


    The phase equilibriua in the Ni-Re-Hf ternary system at 1173K were investigated by means of diffusion triple technique and electron microprobe analysis(EMPA). The experimental results indicate that two ternary intermetallics (α and β) and five binary intermetallics (Ni3Hf, Ni10Hf7, Ni11Hf9, NiHf and NiHf2) exist in the Ni-Re-Hf system at 1173 K. A tentative isothermal section of this system at 1173 K was constructed on the basis of experimental results. The isothermal section consists of nine three-phase regions, five of which are supported by the experimental data.

  19. Spallation and fission products in the (p+{sup 179}Hf) and (p+{sup nat}Hf) reactions

    Energy Technology Data Exchange (ETDEWEB)

    Karamian, S.A. [Joint Institute for Nuclear Research, Moscow Region, Dubna 141980 (Russian Federation); Ur, C.A. [Horia Hulubei National Institute of Physics and Nuclear Engineering, P.O. Box MG-6, Bucharest 077125 (Romania); Induced Gamma Emission Foundation, P.O. Box 34-81, Bucharest 010044 (Romania)], E-mail:; Adam, J. [Joint Institute for Nuclear Research, Moscow Region, Dubna 141980 (Russian Federation); Institute of Nuclear Physics, Rez, Prague CZ-25068 (Czech Republic); Kalinnikov, V.G.; Lebedev, N.A.; Vostokin, G.K. [Joint Institute for Nuclear Research, Moscow Region, Dubna 141980 (Russian Federation); Collins, C.B. [Center for Quantum Electronics, University of Texas at Dallas, Richardson, TX 75083 (United States); Popescu, I.I. [Induced Gamma Emission Foundation, P.O. Box 34-81, Bucharest 010044 (Romania)


    Production of Hf and Lu high-spin isomers has been experimentally studied in spallation reactions induced by intermediate energy protons. Targets of enriched {sup 179}Hf (91%) and {sup nat}Hf were bombarded with protons of energy in the range from 90 to 650 MeV provided by the internal beam of the Dubna Phasotron synchrocyclotron. The activation yields of the reaction products were measured by using the {gamma}-ray spectroscopy and radiochemistry methods. The production cross-sections obtained for the {sup 179m2}Hf, {sup 178m2}Hf and {sup 177m}Lu isomers are similar to the previously measured values from the spallation of Ta, Re and W targets. Therefore, the reactions involving emission of only a few nucleons, like (p,p'), (p,p'n) and (p,2pn), can transfer high enough angular momentum to the final residual nuclei with reasonable large cross-sections. A significant gain in the isomeric yields was obtained when enriched {sup 179}Hf targets were used. The mass distribution of the residual nuclei was measured over a wide range of masses and the fission-to-spallation ratio could be deduced as a function of the projectile energy. Features of the reaction mechanism are briefly discussed.

  20. Hf-Nd isotope and trace element constraints on subduction inputs at island arcs: Limitations of Hf anomalies as sediment input indicators (United States)

    Handley, Heather K.; Turner, Simon; Macpherson, Colin G.; Gertisser, Ralf; Davidson, Jon P.


    New Nd-Hf isotope and trace element data for Javanese volcanoes are combined with recently published data to place constraints on subduction inputs at the Sunda arc in Indonesia and assess the value of Hf anomalies (expressed as Hf/Hf* and Sm/Hf ratios) as tracers of such inputs. Hf anomaly does not correlate with Hf isotope ratio in Javanese lavas, however, Hf/Hf* and Sm/Hf ratios do correlate with SiO 2. Contrary to previous work, we show that Hf anomaly variation may be controlled by fractionation of clinopyroxene and/or amphibole during magmatic differentiation and does not represent the magnitude or type of subduction input in some arcs. Correlation of Sm/Hf with indices of differentiation for other arcs (e.g., Vanuatu, New Britain, and Mariana) suggests that differentiation control on Sm/Hf ratios in volcanic arc rocks may be a relatively common phenomenon. This study corroborates the use of Nd-Hf isotope co-variations in arc volcanic rocks to ascertain subduction input characteristics. The trajectories of regional volcano groups (East, Central and West Java) in Nd-Hf isotope space reveal heterogeneity in the subducted sediment input along Java, which reflects present-day spatial variations in sediment compositions on the down-going plate in the Java Trench. The high Sm/Hf ratio required in the sediment end-member for some Javanese basalts suggests that partial melting of subducted sediment occurs in the presence of residual zircon, and is inconsistent with residual monazite or allanite.

  1. Serpentinization Changes Nd, but not Hf Isotopes of Abyssal Peridotites (United States)

    Bizimis, M.; Frisby, C. P.; Mallick, S.


    Serpentinization of the oceanic lithosphere is a known sink for fluid mobile elements (B, Cl, Li, Sr, etc.), while high field strength elements (HFSE: e.g., Hf, Zr, Ti, Nb) are thought to be unaffected by it. In contrast, the fate of REE during serpentinization is equivocal. Correlations between REE and HFSE concentrations in abyssal peridotites suggest control by magmatic processes (Niu, 2004, J. Pet), while some LREE enrichments in serpentinized peridotites compared to their clinopyroxene (cpx) and Nd, Sr isotope data (Delacour et al., 2008, Chem. Geol.) imply seawater-derived REE addition to the mantle protolith (Paulick et al., 2006, Chem. Geol). To further constrain peridotite-seawater interaction during serpentinization we compare bulk rock and cpx Hf and Nd isotope data in partially (up to ~70%) serpentinized abyssal peridotites (9-16°E South West Indian Ridge). We also present a new method that improves yields in Hf, Nd and Pb separations from depleted (90% of Hf, Zr, Ti are retained in the residue. LA-ICPMS data shows that serpentine after olivine typically has higher LREE/HREE ratios than cpx, pronounced negative Ce anomalies, high U, Sr concentrations and low HFSE, unlike the coexisting cpx. These data are consistent with some seawater-derived LREE addition to peridotite during serpentinization, localized in the serpentine and other secondary phases, while cpx retains the magmatic value. This process will lower the Sm/Nd relative to Lu/Hf ratio in the peridotite and can lead to decoupled radiogenic Hf and unradiogenic Nd isotopes upon recycling and aging. Our data further testifies to the fidelity of Hf isotopes in tracing mantle processes, even in serpentinized rocks.

  2. Joint Efforts Towards European HF Radar Integration (United States)

    Rubio, A.; Mader, J.; Griffa, A.; Mantovani, C.; Corgnati, L.; Novellino, A.; Schulz-Stellenfleth, J.; Quentin, C.; Wyatt, L.; Ruiz, M. I.; Lorente, P.; Hartnett, M.; Gorringe, P.


    During the past two years, significant steps have been made in Europe for achieving the needed accessibility to High Frequency Radar (HFR) data for a pan-European use. Since 2015, EuroGOOS Ocean Observing Task Teams (TT), such as HFR TT, are operational networks of observing platforms. The main goal is on the harmonization of systems requirements, systems design, data quality, improvement and proof of the readiness and standardization of HFR data access and tools. Particular attention is being paid by HFR TT to converge from different projects and programs toward those common objectives. First, JERICO-NEXT (Joint European Research Infrastructure network for Coastal Observatory - Novel European eXpertise for coastal observaTories, H2020 2015 Programme) will contribute on describing the status of the European network, on seeking harmonization through exchange of best practices and standardization, on developing and giving access to quality control procedures and new products, and finally on demonstrating the use of such technology in the general scientific strategy focused by the Coastal Observatory. Then, EMODnet (European Marine Observation and Data Network) Physics started to assemble HF radar metadata and data products within Europe in a uniform way. This long term program is providing a combined array of services and functionalities to users for obtaining free of charge data, meta-data and data products on the physical conditions of European sea basins and oceans. Additionally, the Copernicus Marine Environment Monitoring Service (CMEMS) delivers from 2015 a core information service to any user related to 4 areas of benefits: Maritime Safety, Coastal and Marine Environment, Marine Resources, and Weather, Seasonal Forecasting and Climate activities. INCREASE (Innovation and Networking for the integration of Coastal Radars into EuropeAn marine SErvices - CMEMS Service Evolution 2016) will set the necessary developments towards the integration of existing European

  3. Investigating the Relationship between Stable Personality Characteristics and Automatic Imitation. (United States)

    Butler, Emily E; Ward, Robert; Ramsey, Richard


    Automatic imitation is a cornerstone of nonverbal communication that fosters rapport between interaction partners. Recent research has suggested that stable dimensions of personality are antecedents to automatic imitation, but the empirical evidence linking imitation with personality traits is restricted to a few studies with modest sample sizes. Additionally, atypical imitation has been documented in autism spectrum disorders and schizophrenia, but the mechanisms underpinning these behavioural profiles remain unclear. Using a larger sample than prior studies (N=243), the current study tested whether performance on a computer-based automatic imitation task could be predicted by personality traits associated with social behaviour (extraversion and agreeableness) and with disorders of social cognition (autistic-like and schizotypal traits). Further personality traits (narcissism and empathy) were assessed in a subsample of participants (N=57). Multiple regression analyses showed that personality measures did not predict automatic imitation. In addition, using a similar analytical approach to prior studies, no differences in imitation performance emerged when only the highest and lowest 20 participants on each trait variable were compared. These data weaken support for the view that stable personality traits are antecedents to automatic imitation and that neural mechanisms thought to support automatic imitation, such as the mirror neuron system, are dysfunctional in autism spectrum disorders or schizophrenia. In sum, the impact that personality variables have on automatic imitation is less universal than initial reports suggest.

  4. Investigating the Relationship between Stable Personality Characteristics and Automatic Imitation.

    Directory of Open Access Journals (Sweden)

    Emily E Butler

    Full Text Available Automatic imitation is a cornerstone of nonverbal communication that fosters rapport between interaction partners. Recent research has suggested that stable dimensions of personality are antecedents to automatic imitation, but the empirical evidence linking imitation with personality traits is restricted to a few studies with modest sample sizes. Additionally, atypical imitation has been documented in autism spectrum disorders and schizophrenia, but the mechanisms underpinning these behavioural profiles remain unclear. Using a larger sample than prior studies (N=243, the current study tested whether performance on a computer-based automatic imitation task could be predicted by personality traits associated with social behaviour (extraversion and agreeableness and with disorders of social cognition (autistic-like and schizotypal traits. Further personality traits (narcissism and empathy were assessed in a subsample of participants (N=57. Multiple regression analyses showed that personality measures did not predict automatic imitation. In addition, using a similar analytical approach to prior studies, no differences in imitation performance emerged when only the highest and lowest 20 participants on each trait variable were compared. These data weaken support for the view that stable personality traits are antecedents to automatic imitation and that neural mechanisms thought to support automatic imitation, such as the mirror neuron system, are dysfunctional in autism spectrum disorders or schizophrenia. In sum, the impact that personality variables have on automatic imitation is less universal than initial reports suggest.

  5. First-principles study of the Hf-based Heusler alloys: Hf2CoGa and Hf2CoIn (United States)

    Hu, Yan; Zhang, Jian-Min


    The electronic structures and magnetic properties of the new Heusler alloys Hf2CoGa and Hf2CoIn have been studied by using the first-principles projector augmented wave (PAW) potential within the generalized gradient approximation (GGA). Both Hf2CoGa and Hf2CoIn Heusler alloys have the half-metallic character and completely (100%) spin polarization at the Fermi level (EF) and the indirect band gaps of 0.733 eV and 0.654 eV, respectively, in the minority spin channel. The total magnetic moments μt are all 2μB per formula unit, linearly scaled with the total number of valence electrons (Zt) by μt=Zt-18 and the atomic magnetic moments have localized character due to less affected by deformations. The origin of the indirect band gaps for these two new Heusler alloys is well understood. These two new Heusler alloys are the ideal candidates for spintronic devices.

  6. HF omnidirectional spectral CW auroral radar (HF-OSCAR) at very high latitude. Part 1: Technique (United States)

    Olesen, J. K.; Jacobsen, K. E.; Stauning, P.; Henriksen, S.


    An HF system for studies of very high latitude ionospheric irregularities was described. Radio aurora from field-aligned E-region irregularities of the Slant E Condition type were discussed. The complete system combines an ionosonde, a 12 MHz pulse radar and a 12 MHz bistatic CW Doppler-range set-up. The two latter units use alternately a 360 deg rotating Yagi antenna. High precision oscillators secure the frequency stability of the Doppler system in which the received signal is mixed down to a center frequency of 500 Hz. The Doppler shift range is max + or - 500 Hz. The received signal is recorded in analog form on magnetic tape and may be monitored visually and audibly. Echo range of the CW Doppler signal is obtained by a 150 Hz amplitude modulation of the transmitted signal and phase comparison with the backscattered signal.

  7. Comparison of HfAlO, HfO2/Al2O3, and HfO2 on n-type GaAs using atomic layer deposition (United States)

    Lu, Bin; Lv, Hongliang; Zhang, Yuming; Zhang, Yimen; Liu, Chen


    Different high-permittivity (high-k) gate dielectric structures of HfO2, HfAlO, and HfO2/Al2O3 deposited on HF-etched n-GaAs using ALD have been investigated. It has been demonstrated that the stacked structure of HfO2/Al2O3 has the lowest interface state density of 8.12 × 1012eV-1 cm-2 due to the "self-cleaning" reaction process, but the sample of HfAlO shows much better frequency dispersion and much higher dielectric permittivity extracted from the C-V curves. The investigation reveals that the electrical properties of gate dielectrics are improved by introducing alumina into HfO2.

  8. Automaticity or active control

    DEFF Research Database (Denmark)

    Tudoran, Ana Alina; Olsen, Svein Ottar

    This study addresses the quasi-moderating role of habit strength in explaining action loyalty. A model of loyalty behaviour is proposed that extends the traditional satisfaction–intention–action loyalty network. Habit strength is conceptualised as a cognitive construct to refer to the psychological...... aspects of the construct, such as routine, inertia, automaticity, or very little conscious deliberation. The data consist of 2962 consumers participating in a large European survey. The results show that habit strength significantly moderates the association between satisfaction and action loyalty, and...

  9. Automatic Configuration in NTP

    Institute of Scientific and Technical Information of China (English)

    Jiang Zongli(蒋宗礼); Xu Binbin


    NTP is nowadays the most widely used distributed network time protocol, which aims at synchronizing the clocks of computers in a network and keeping the accuracy and validation of the time information which is transmitted in the network. Without automatic configuration mechanism, the stability and flexibility of the synchronization network built upon NTP protocol are not satisfying. P2P's resource discovery mechanism is used to look for time sources in a synchronization network, and according to the network environment and node's quality, the synchronization network is constructed dynamically.

  10. Automatic Complexity Analysis

    DEFF Research Database (Denmark)

    Rosendahl, Mads


    One way to analyse programs is to to derive expressions for their computational behaviour. A time bound function (or worst-case complexity) gives an upper bound for the computation time as a function of the size of input. We describe a system to derive such time bounds automatically using abstrac...... interpretation. The semantics-based setting makes it possible to prove the correctness of the time bound function. The system can analyse programs in a first-order subset of Lisp and we show how the system also can be used to analyse programs in other languages....

  11. Automatic alignment of a Michelson interferometer

    Energy Technology Data Exchange (ETDEWEB)

    Barone, F.; Di Fiore, L.; Milano, L.; Russo, G.; Solimeno, S. (Inst. Nazionale di Fisica Nucleare, Napoli (IT))


    This paper describes the control system for the automatic control of a very large dual-wave Michelson interferometer to be used in the VIRGO experiment, a gravitational wave search in the band 10 to 3000 Hz. The system is mainly based on a VME bus architecture for the local controls, on which numeric control system based on digital filters are implemented. The authors describe these control systems, and the way they are linked together to form the global control system, in a hierarchical configuration.

  12. Mechanical properties of cast Ti-Hf alloys. (United States)

    Sato, Hideki; Kikuchi, Masafumi; Komatsu, Masashi; Okuno, Osamu; Okabe, Toru


    This study examined the mechanical properties of a series of Ti-Hf alloys. Titanium alloys with 10 to 40 mass % Hf were made with titanium and hafnium sponge in an argon-arc melting furnace. Specimens cast into magnesia-based investment molds were tested for yield strength, tensile strength, percentage elongation, and modulus of elasticity. Vickers microhardness was determined at 25 to 600 microm from the cast surface. X-ray diffractometry was also performed. Commercially pure Ti (CP Ti) and pure Ti prepared from titanium sponge were used as controls. The data (n = 5) were analyzed with a one-way ANOVA and the Student-Newman-Keuls test (alpha = 0.05). The diffraction peaks of all the metals matched those for alpha Ti; no beta phase peaks were found. Alloys with Hf > or = 25% had significantly (p 0.05) in elongation among all the Ti-Hf alloys and CP Ti, whereas the elongation of alloys with Hf > or = 30% was significantly (p alloys tested can be considered viable alternatives to CP Ti because they were stronger than CP Ti and had similar elongation.

  13. HfO2 Gate Dielectrics for Future Generation of CMOS Device Application

    Institute of Scientific and Technical Information of China (English)

    H.Y.Yu; J.F.Kang; Ren Chi; M.F.Li; D.L.Kwong


    The material and electrical properties of HfO2 high-k gate dielectric are reported.In the first part,the band alignment of HfO2 and (HfO2)x(Al2O3)1-x to (100)Si substrate and their thermal stability are studied by X-ray photoelectron spectroscopy and TEM.The energy gap of (HfO2)x(Al2O3)1-x,the valence band offset,and the conduction band offset between (HfO2)x(Al2O3)1-x and the Si substrate as functions of x are obtained based on the XPS results.Our XPS results also demonstrate that both the thermal stability and the resistance to oxygen diffusion of HfO2 are improved by adding Al to form Hf aluminates.In the second part,a thermally stable and high quality HfN/HfO2 gate stack is reported.Negligible changes in equivalent oxide thickness (EOT),gate leakage,and work function (close to Si mid-gap) of HfN/HfO2 gate stack are demonstrated even after 1000℃ post-metal annealing(PMA),which is attributed to the superior oxygen diffusion barrier of HfN as well as the thermal stability of the HfN/HfO2 interface.Therefore,even without surface nitridation prior to HfO2 deposition,the EOT of HfN/HfO2 gate stack has been successfully scaled down to less than 1nm after 1000℃ PMA with excellent leakage and long-term reliability.The last part demonstrates a novel replacement gate process employing a HfN dummy gate and sub-1nm EOT HfO2 gate dielectric.The excellent thermal stability of the HfN/HfO2 gate stack enables its use in high temperature CMOS processes.The replacement of HfN with other metal gate materials with work functions adequate for n- and p-MOS is facilitated by a high etch selectivity of HfN with respect to HfO2,without any degradation to the EOT,gate leakage,or TDDB characteristics of HfO2.

  14. Automaticity or active control

    DEFF Research Database (Denmark)

    Tudoran, Ana Alina; Olsen, Svein Ottar

    This study addresses the quasi-moderating role of habit strength in explaining action loyalty. A model of loyalty behaviour is proposed that extends the traditional satisfaction–intention–action loyalty network. Habit strength is conceptualised as a cognitive construct to refer to the psychologic......, respectively, between intended loyalty and action loyalty. At high levels of habit strength, consumers are more likely to free up cognitive resources and incline the balance from controlled to routine and automatic-like responses.......This study addresses the quasi-moderating role of habit strength in explaining action loyalty. A model of loyalty behaviour is proposed that extends the traditional satisfaction–intention–action loyalty network. Habit strength is conceptualised as a cognitive construct to refer to the psychological...... aspects of the construct, such as routine, inertia, automaticity, or very little conscious deliberation. The data consist of 2962 consumers participating in a large European survey. The results show that habit strength significantly moderates the association between satisfaction and action loyalty, and...

  15. Pressure-induced novel compounds in the Hf-O system from first-principles calculations (United States)

    Zhang, Jin; Oganov, Artem R.; Li, Xinfeng; Xue, Kan-Hao; Wang, Zhenhai; Dong, Huafeng


    Using first-principles evolutionary simulations, we have systematically investigated phase stability in the Hf-O system at pressure up to 120 GPa. New compounds Hf5O2,Hf3O2 , HfO, and HfO3 are discovered to be thermodynamically stable at certain pressure ranges. Two new high-pressure phases are found for Hf2O : one with space group Pnnm and anti-CaCl2-type structure, another with space group I 41/amd. Pnnm-HfO3 shows interesting structure, simultaneously containing oxide O2 - and peroxide [O-O]2 - anions. Remarkably, it is P 6 ¯2 m -HfO rather than OII-HfO2 that exhibits the highest mechanical characteristics among Hf-O compounds. Pnnm-Hf2O , Imm2-Hf5O2 ,P 3 ¯1 m -Hf2O , and P 4 ¯m 2 -Hf2O3 phases also show superior mechanical properties; theoretically these phases become metastable phases to ambient pressure and their properties can be exploited.

  16. Communication Links



    This interactive tutorial helps learners to: Identify key upward, lateral, downward, and informal communication links in their organizations. , Reflect on the benefits, control, satisfaction, information filters, and feedback mechanism of various communication links in the organizations. OCL1000 Communicating Change in Complex Organizations

  17. Operative links

    DEFF Research Database (Denmark)

    Wistoft, Karen


    as networks: second, a semantic perspective on discourses and concepts of health, and, third, a health pedagogical perspective on participation, intervention, and roles. This paper argues for the importance of 'operative links' between different levels in health strategies. It is proposed that such links...

  18. Effect of HF leaching on 14C dates of pottery (United States)

    Goslar, Tomasz; Kozłowski, Janusz; Szmyt, Marzena; Czernik, Justyna


    This paper presents the experiments with 14C dating of two potsherds, which contained carbon dispersed rather homogeneously in their clay fabric. After AAA treatment, the potsherds still appeared to be contaminated with young carbon, presumably connected with humic acids. To make removal of humic acids more effective, we treated the sherds with HF acid of different concentration. The 14C results obtained demonstrate that HF treatment indeed helps to remove humic contaminants, but it also mobilizes carbon bound to raw clay, which may make 14C dates too old. We conclude therefore, that using a simple combination of HF and AAA treatment seems insufficient in reliable 14C dating of carbon homogeneously dispersed in the volume of potsherds.

  19. Comparison of automatic control systems (United States)

    Oppelt, W


    This report deals with a reciprocal comparison of an automatic pressure control, an automatic rpm control, an automatic temperature control, and an automatic directional control. It shows the difference between the "faultproof" regulator and the actual regulator which is subject to faults, and develops this difference as far as possible in a parallel manner with regard to the control systems under consideration. Such as analysis affords, particularly in its extension to the faults of the actual regulator, a deep insight into the mechanism of the regulator process.

  20. The Status of Rotational Nonequilibrium in HF Chemical Lasers (United States)


    later study from the same laboratory, Copeland et al. 5 3 used a NdYAG dye laser to pump HF into v = 2, j, and an HF pulsed laser to probe various P 2(J... Weston , Jr., J. Chem. Phys. 77, 4776 (1982). 51. J. J. Hinchen and R. H. Hobbs, Appl. Phys. 50, 628 (1979). 52. j. K. Lambert, G. M. Jursich, and F. F...Crim, Chem. Phys. Lett. 71, 258 (1980). 53. R. A. Copeland , D. J. Pearson, and F. F. Crim, Chem. Phys. Lett. 81, 541 (1981). 54. T. J. Foster and F. F

  1. HF-induced airglow at magnetic zenith: theoretical considerations

    Directory of Open Access Journals (Sweden)

    E. V. Mishin


    Full Text Available Observations of airglow at 630nm (red line and 557.7nm (green line during HF modification experiments at the High Frequency Active Auroral Research Program (HAARP heating facility are analyzed. We propose a theoretical framework for understanding the generation of Langmuir and ion acoustic waves during magnetic zenith injections. We show that observations of HF-induced airglow in an underdense ionosphere as well as a decrease in the height of the emitting volume are consistent with this scenario.

  2. HF-hash : Hash Functions Using Restricted HFE Challenge-1

    CERN Document Server

    Dey, Dhananjoy; Gupta, Indranath Sen


    Vulnerability of dedicated hash functions to various attacks has made the task of designing hash function much more challenging. This provides us a strong motivation to design a new cryptographic hash function viz. HF-hash. This is a hash function, whose compression function is designed by using first 32 polynomials of HFE Challenge-1 with 64 variables by forcing remaining 16 variables as zero. HF-hash gives 256 bits message digest and is as efficient as SHA-256. It is secure against the differential attack proposed by Chabaud and Joux as well as by Wang et. al. applied to SHA-0 and SHA-1.

  3. Hf--Co--B alloys as permanent magnet materials

    Energy Technology Data Exchange (ETDEWEB)

    McGuire, Michael Alan; Rios, Orlando; Ghimire, Nirmal Jeevi


    An alloy composition is composed essentially of Hf.sub.2-XZr.sub.XCo.sub.11B.sub.Y, wherein 0Hf.sub.2-XZr.sub.XCo.sub.11B.sub.Y, wherein 0.ltoreq.X<2 and 0

  4. First HF radar measurements of summer mesopause echoes at SURA

    Directory of Open Access Journals (Sweden)

    A. N. Karashtin

    Full Text Available HF sounding of the mesosphere was first carried out at SURA in summer 1994 at frequencies in the range 8–9 MHz using one of the sub-arrays of the SURA heating facility. The observations had a range resolution of 3 km. Almost all measurements indicated the presence of strong radar returns from altitudes between 83 and 90 km with features very similar to VHF measurements of mesopause summer echoes at mid-latitudes and polar mesopause summer echoes. In contrast to VHF observations, HF mesopause echoes are almost always present.

  5. First HF radar measurements of summer mesopause echoes at SURA (United States)

    Karashtin, A. N.; Shlyugaev, Y. V.; Abramov, V. I.; Belov, I. F.; Berezin, I. V.; Bychkov, V. V.; Eryshev, E. B.; Komrakov, G. P.


    HF sounding of the mesosphere was first carried out at SURA in summer 1994 at frequencies in the range 8-9 MHz using one of the sub-arrays of the SURA heating facility. The observations had a range resolution of 3 km. Almost all measurements indicated the presence of strong radar returns from altitudes between 83 and 90 km with features very similar to VHF measurements of mesopause summer echoes at mid-latitudes and polar mesopause summer echoes. In contrast to VHF observations, HF mesopause echoes are almost always present.

  6. Validation of the CUTLASS HF radar gravity wave observing capability using EISCAT CP-1 data

    Directory of Open Access Journals (Sweden)

    N. F. Arnold

    Full Text Available Quasi-periodic fluctuations in the returned ground-scatter power from the SuperDARN HF radars have been linked to the passage of medium-scale gravity waves. We have applied a technique that extracts the first radar range returns from the F-region to study the spatial extent and characteristics of these waves in the CUTLASS field-of-view. Some ray tracing was carried out to test the applicability of this method. The EISCAT radar facility at Tromsø is well within the CUTLASS field-of-view for these waves and provides a unique opportunity to assess independently the ability of the HF radars to derive gravity wave information. Results from 1st March, 1995, where the EISCAT UHF radar was operating in its CP-1 mode, demonstrate that the radars were in good agreement, especially if one selects the electron density variations measured by EISCAT at around 235 km. CUTLASS and EISCAT gravity wave observations complement each other; the former extends the spatial field of view considerably, whilst the latter provides detailed vertical information about a range of ionospheric parameters.

    Key words. Ionosphere (ionosphere – atmosphere interactions · Meteorology and atmospheric dynamics (thermospheric dynamics · Radio science (ionospheric propagations

  7. Automatic Fixture Planning

    Institute of Scientific and Technical Information of China (English)


    Fixture planning is a crucial problem in the field of fixture design. In this paper, the research scope and research methods of the computer-aided fixture planning are presented. Based on positioning principles of typical workparts, an ANN algorithm, namely Hopfield algorithm, is adopted for the automatic fixture planning. Also, this paper leads a deep research into the selection of positioning and clamping surfaces (or points) on workparts using positioning-clamping-surface-selecting rules and matrix evaluation of deterministic workpart positioning. In the end of this paper, the methods to select positioning and clamping elements from database and the layout algorithm to assemble the selected fixture elements into a tangible fixture are developed.

  8. Link Analysis (United States)

    Donoho, Steve

    Link analysis is a collection of techniques that operate on data that can be represented as nodes and links. This chapter surveys a variety of techniques including subgraph matching, finding cliques and K-plexes, maximizing spread of influence, visualization, finding hubs and authorities, and combining with traditional techniques (classification, clustering, etc). It also surveys applications including social network analysis, viral marketing, Internet search, fraud detection, and crime prevention.

  9. Evolution of E2 transition strength in deformed hafnium isotopes from new measurements on $^{172}$Hf, $^{174}$Hf, and $^{176}$Hf

    CERN Document Server

    Rudigier, M; Dannhoff, M; Gerst, R-B; Jolie, J; Saed-Samii, N; Stegemann, S; Régis, J-M; Robledo, L M; Rodríguez-Guzmán, R; Blazhev, A; Fransen, Ch; Warr, N; Zell, K O


    The available data for E2 transition strengths in the region between neutron-deficient Hf and Pt isotopes are far from complete. More and precise data are needed to enhance the picture of structure evolution in this region and to test state-of-the-art nuclear models. In a simple model, the maximum collectivity is expected at the middle of the major shell. However, for actual nuclei, this picture may no longer be the case, and one should use a more realistic nuclear-structure model. We address this point by studying the spectroscopy of Hf. We remeasure the 2^+_1 half-lives of 172,174,176Hf, for which there is some disagreement in the literature. The main goal is to measure, for the first time, the half-lives of higher-lying states of the rotational band. The new results are compared to a theoretical calculation for absolute transition strengths. The half-lives were measured using \\gamma-\\gamma and conversion-electron-\\gamma delayed coincidences with the fast timing method. For the determination of half-lives i...

  10. Comparative study of atomic-layer-deposited HfO2/Al2O3, Hf0.8Al0.2Ox and Hf0.5Al0.5Ox on N-GaAs (United States)

    Yu, Xinjiang; Lv, Hongliang; Zhang, Yuming; Zhang, Yimen; Qin, Zaiyang


    Interfacial properties of n-GaAs metal-oxide-semiconductor (MOSCAPs) with the gate dielectrics of HfO2/Al2O3, Hf0.8Al0.2Ox and Hf0.5Al0.5Ox are investigated. The results reveal that Hf0.5Al0.5Ox has larger permittivity and lower interface trap density than that of HfO2/Al2O3. In order to explain the result from the physical perspective, the XPS tests of all three samples are performed. It is found that the main reason to form interface trap of three samples treated with 500 °C post-deposition annealing, is attributed to the interfacial component of Ga2O3 and The Hf0.5Al0.5Ox dielectric is beneficial to reducing the formation of Ga2O3.

  11. First 100 ms of HF modification at Tromso, Norway (United States)

    Djuth, F. T.; Isham, B.; Rietveld, M. T.; Hagfors, T.; La Hoz, C.

    Experiments were performed with the high-power high-frequency HF facility at Troms o Norway to test theoretical predictions for the excitation of ion and Langmuir oscillations in the ionosphere The principal diagnostic of wave-plasma interactions was the VHF radar at the European Incoherent Scatter EISCAT facility High resolution radar techniques were used to monitor the temporal development of the ion and Langmuir oscillations HF pulses 100 ms in duration were periodically transmitted into a smooth background F region plasma Measurements of the radar backscatter spectra show that all key spectral features predicted by strong Langmuir turbulence SLT theory modified Zakharov model are simultaneously present in the plasma and that their evolution is in agreement with theoretical expectations However several new features have been observed that cannot be anticipated by current theory because of limitations in the electric field strength within the simulations The experimental results reinforce the notion that new theoretical developments are needed to accommodate the large HF electric fields produced at Troms o and HAARP Gakona Alaska and to treat the electron acceleration process in a self-consistent fashion The F region response to two HF effective radiated power levels sim 58 MW and sim 125 MW was investigated at Troms o These ERP values include absorptive losses resulting from the sunlit D region In general the results at 58 MW ERP and 125 MW ERP are consistent with many of the SLT

  12. The multilayer Fe/Hf studied with slow positron beam (United States)

    Murashige, Y.; Tashiro, M.; Nakajyo, T.; Koizumi, T.; Kanazawa, I.; Komori, F.; Ito, Y.


    The positron annihilation parameter versus the incident positron energy is measured in the thin Fe films and the Fe/Hf bilayer on silica substrate, by means of the variable energetic slow-positron beam technique. We have analyzed the change in open-volume spaces and vacancy-type defects among the Fe microcrystals in these thin films with the deposition temperature.

  13. A CMOS OTA for HF filters with programmable transfer function

    NARCIS (Netherlands)

    van de Zwan, Eric J.; Klumperink, Eric A.M.; Seevinck, E.; Seevinck, Evert


    A CMOS operational transconductance amplifier (OTA) for programmable HF filters is presented. When used in an OTA-C integrator, the unity-gain frequency phase error remains less than 0.3° for frequencies up to more than one tenth of the OTA bandwidth. The OTA has built-in phase compensation, which

  14. Hf isotope evidence for a hidden mantle reservoir

    DEFF Research Database (Denmark)

    Bizzarro, Martin; Simonetti, A.; Stevenson, R.K.


    High-precision Hf isotopic analyses and U-Pb ages of carbonatites and kimberlites from Greenland and eastern North America, including Earth's oldest known carbonatite (3 Ga), indicate derivation from an enriched mantle source. This previously unidentified mantle reservoir-marked by an unradiogeni...

  15. Origin of excess 176Hf in meteorites

    DEFF Research Database (Denmark)

    Thrane, Kristine; Connelly, James; Bizzarro, Martin


    After considerable controversy regarding the (176)Lu decay constant (lambda(176)Lu), there is now widespread agreement that (1.867 +/- 0.008) x 10(-11) yr(-1) as confirmed by various terrestrial objects and a 4557 Myr meteorite is correct. This leaves the (176)Hf excesses that are correlated with...

  16. Self-diffusion of Er and Hf inpure and HfO/sub 2/-doped polycrystalline Er/sub 2/O/sub 3/. [Hf-175 and Er-169

    Energy Technology Data Exchange (ETDEWEB)

    Scheidecker, R.W.


    Using a tracer technique, self-diffusion of Er and Hf was measured over the approximate temperature interval of 1600 to 1970/sup 0/C in pure and HfO/sub 2/-doped polycryatalline Er/sub 2/O/sub 3/. Up to about 10 m/o HfO/sub 2/ dopant level, the Er self-diffusion coefficients followed a relationship based on cation vacancies. Above 10 m/o HfO/sub 2/, deviation from this relationship occurred, apparently due to clustering of cation vacancies and oxygen interstitials around the dopant hafnia ion. The activation energy for the self-diffusion of Er in pure Er/sub 2/O/sub 3/ was 82.2 Kcal/mole and increased with the HfO/sub 2/ dopant level present. Self-diffusion of Hf was measured in pure Er/sub 2/O/sub 3/ having two impurity levels, and a separation of the grain boundary. The volume diffusion of Hf showed both extrinsic and intrinsic behavior with the transition temperature increasing with the impurity level present in Er/sub 2/O/sub 3/. The activation energy for Hf volume diffusion in the intrinsic region was high, i.e. 235 -+ 9.5 Kcal/mole. The grain boundary diffusion was apparently extrinsic over the entire temperature interval Very low Hf self diffusion rates were found in both pure and HfO/sub 2/ doped Er/sub 2/O/sub 3/ compositions. Despite a clustering effect, the HfO/sub 2/ dopant increased the Hf volume diffusion coefficients.

  17. Helium implanted $\\rm\\underline{Al}$Hf as studied by 181Ta TDPAC

    Indian Academy of Sciences (India)

    R Govindaraj; K P Gopinathan; B Viswanathan


    Time differential perturbed angular correlation (TDPAC) measurement on $\\rm\\underline{Al}$Hf reference sample has shown that a fraction 0.88 of probe nuclei are defect free and are occupying the substitutional sites in fcc Al matrix, and the remaining are associated with Hf solute clusters. Measurements on helium implanted sample indicate the binding of helium associated defects by Hf solute clusters. Isochronal annealing measurements indicate the dissociation of the helium implantation induced defects from Hf solute clusters for annealing treatments beyond 650 K. On comparison of the present results with that reported in $\\rm\\underline{Cu}$Hf subjected to identical helium implantation, it is inferred that the Hf solute clusters in $\\rm\\underline{Al}$Hf bind less strongly the helium associated defects than in $\\rm\\underline{Cu}$Hf.

  18. Processing and crystallographic structure of non-equilibrium Si-doped HfO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Hou, Dong; Fancher, Chris M.; Esteves, Giovanni; Jones, Jacob L., E-mail: [Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695 (United States); Zhao, Lili [School of Information Science and Technology, Northwest University, Xi' an 710127 (China)


    Si-doped HfO{sub 2} was confirmed to exist as a non-equilibrium state. The crystallographic structures of Si-doped HfO{sub 2} were studied using high-resolution synchrotron X-ray diffraction and the Rietveld refinement method. Incorporation of Si into HfO{sub 2} and diffusion of Si out of (Hf,Si)O{sub 2} were determined as a function of calcination temperature. Higher thermal energy input at elevated calcination temperatures resulted in the formation of HfSiO{sub 4}, which is the expected major secondary phase in Si-doped HfO{sub 2}. The effect of SiO{sub 2} particle size (nano- and micron-sized) on the formation of Si-doped HfO{sub 2} was also determined. Nano-crystalline SiO{sub 2} was found to incorporate into HfO{sub 2} more readily.

  19. Data of evolutionary structure change: 1CLMA-2HF5A [Confc[Archive

    Lifescience Database Archive (English)


  20. HFM-128/143: Moderators as a Method to Link HF to Operational Behaviour (United States)


    It is not unusual to discern perceptual, attentional, cognitive, gross motor, fine motor functions, etc. (e.g., see Wickens’ Multiple Resource Theory ...conflicts are straightforward. Tasks such as typing and playing the piano are incompatible. A task may require several resources and the actual use...scientific theories can be brought to bear. For example, in reinforcement learning theory , behaviour is optimized by finding strategies that balance

  1. Geographic variations in the PARADIGM-HF heart failure trial. (United States)

    Kristensen, Søren Lund; Martinez, Felipe; Jhund, Pardeep S; Arango, Juan Luis; Bĕlohlávek, Jan; Boytsov, Sergey; Cabrera, Walter; Gomez, Efrain; Hagège, Albert A; Huang, Jun; Kiatchoosakun, Songsak; Kim, Kee-Sik; Mendoza, Iván; Senni, Michele; Squire, Iain B; Vinereanu, Dragos; Wong, Raymond Ching-Chiew; Gong, Jianjian; Lefkowitz, Martin P; Rizkala, Adel R; Rouleau, Jean L; Shi, Victor C; Solomon, Scott D; Swedberg, Karl; Zile, Michael R; Packer, Milton; McMurray, John J V


    The globalization of clinical trials has highlighted geographic variations in patient characteristics, event rates, and treatment effects. We investigated these further in PARADIGM-HF, the largest and most globally representative trial in heart failure (HF) to date. We looked at five regions: North America (NA) 602 (8%), Western Europe (WE) 1680 (20%), Central/Eastern Europe/Russia (CEER) 2762 (33%), Latin America (LA) 1433 (17%), and Asia-Pacific (AP) 1487 (18%). Notable differences included: WE patients (mean age 68 years) and NA (65 years) were older than AP (58 years) and LA (63 years) and had more coronary disease; NA and CEER patients had the worst signs, symptoms, and functional status. North American patients were the most likely to have a defibrillating-device (54 vs. 2% AP) and least likely prescribed a mineralocorticoid receptor antagonist (36 vs. 65% LA). Other evidence-based therapies were used most frequently in NA and WE. Rates of the primary composite outcome of cardiovascular (CV) death or HF hospitalization (per 100 patient-years) varied among regions: NA 13.6 (95% CI 11.7-15.7) WE 9.6 (8.6-10.6), CEER 12.3 (11.4-13.2), LA 11.2 (10.0-12.5), and AP 12.5 (11.3-13.8). After adjustment for prognostic variables, relative to NA, the risk of CV death was higher in LA and AP and the risk of HF hospitalization lower in WE. The benefit of sacubitril/valsartan was consistent across regions. There were many regional differences in PARADIGM-HF, including in age, symptoms, comorbidity, background therapy, and event-rates, although these did not modify the benefit of sacubitril/valsartan. CLINICAL TRIAL REGISTRATION URL: Unique identifier: NCT01035255. © The Author 2016. Published by Oxford University Press on behalf of the European Society of Cardiology.

  2. Generating links to background knowledge: a case study using narrative radiology reports

    NARCIS (Netherlands)

    He, J.; de Rijke, M.; Sevenster, M.; van Ommering, R.; Qian, Y.; Berendt, B.; de Vries, A.; Fan, W.; Macdonald, C.; Ounis, I.; Ruthven, I.


    Automatically annotating texts with background information has recently received much attention. We conduct a case study in automatically generating links from narrative radiology reports to Wikipedia. Such links help users understand the medical terminology and thereby increase the value of the

  3. Generating Links to Background Knowledge: A Case Study in Annotating Radiology Reports

    NARCIS (Netherlands)

    He, J.; Rijke, M. de; Sevenster, M.; Ommering, R. van; Qian, Y.


    Automatically annotating texts with background information has recently received much attention. We conduct a case study in automatically generating links from narrative radiology reports to Wikipedia. Such links help users understand the medical terminology and thereby increase the value of the rep

  4. HF Radar observations of the Dardanelles outflow current in North Eastern Aegean using validated WERA HF radar data

    Directory of Open Access Journals (Sweden)



    Full Text Available A two-site WERA HF radar station was installed in November 2009 at the eastern coast of Lemnos Island in North Aegean Sea, aiming to monitor the surface inflow of Black Sea waters exiting from the Dardanelles Strait, as well as to constitute a coastal management tool for incidents of oil-pollution or save-and-rescue operations. Strong interference by foreign transmissions is a source of noise deteriorating the quality of the backscattered signal, thus significantly reducing the HF radar’s effective data return rate. In order to ameliorate this problem, further quality-control and data gap interpolating procedures have been developed and applied, to be used in addition to the procedures incorporated and used by the manufacturer’s signal processing software. The second-level processing involves traditional despiking in the temporal domain, preceding Empirical Orthogonal Function analysis. The latter is used not only to filter high-frequency noise but also to fill data gaps in time and space. The data reconstruction procedure has been assessed via comparison of (a HF radial with CODE-type drifter radial velocities as well as (b HF-derived virtual drifter tracks with actual drifter tracks. The main circulation features and their variability, as revealed by the reconstructed fields, are presented.

  5. HF Radar observations of the Dardanelles outflow current in North Eastern Aegean using validated WERA HF radar data

    Directory of Open Access Journals (Sweden)



    Full Text Available A two-site WERA HF radar station was installed in November 2009 at the eastern coast of Lemnos Island in North Aegean Sea, aiming to monitor the surface inflow of Black Sea waters exiting from the Dardanelles Strait, as well as to constitute a coastal management tool for incidents of oil-pollution or save-and-rescue operations. Strong interference by foreign transmissions is a source of noise deteriorating the quality of the backscattered signal, thus significantly reducing the HF radar’s effective data return rate. In order to ameliorate this problem, further quality-control and data gap interpolating procedures have been developed and applied, to be used in addition to the procedures incorporated and used by the manufacturer’s signal processing software. The second-level processing involves traditional despiking in the temporal domain, preceding Empirical Orthogonal Function analysis. The latter is used not only to filter high-frequency noise but also to fill data gaps in time and space. The data reconstruction procedure has been assessed via comparison of (a HF radial with CODE-type drifter radial velocities as well as (b HF-derived virtual drifter tracks with actual drifter tracks. The main circulation features and their variability, as revealed by the reconstructed fields, are presented.

  6. Assimilative model for ionospheric dynamics employing delay, Doppler, and direction of arrival measurements from multiple HF channels (United States)

    Fridman, Sergey V.; Nickisch, L. J.; Hausman, Mark; Zunich, George


    We describe the development of new HF data assimilation capabilities for our ionospheric inversion algorithm called GPSII (GPS Ionospheric Inversion). Previously existing capabilities of this algorithm included assimilation of GPS total electron content data as well as assimilation of backscatter ionograms. In the present effort we concentrated on developing assimilation tools for data related to HF propagation channels. Measurements of propagation delay, angle of arrival, and the ionosphere-induced Doppler from any number of known propagation links can now be utilized by GPSII. The resulting ionospheric model is consistent with all assimilated measurements. This means that ray tracing simulations of the assimilated propagation links are guaranteed to be in agreement with measured data within the errors of measurement. The key theoretical element for assimilating HF data is the raypath response operator (RPRO) which describes response of raypath parameters to infinitesimal variations of electron density in the ionosphere. We construct the RPRO out of the fundamental solution of linearized ray tracing equations for a dynamic magnetoactive plasma. We demonstrate performance and internal consistency of the algorithm using propagation delay data from multiple oblique ionograms (courtesy of Defence Science and Technology Organisation, Australia) as well as with time series of near-vertical incidence sky wave data (courtesy of the Intelligence Advanced Research Projects Activity HFGeo Program Government team). In all cases GPSII produces electron density distributions which are smooth in space and in time. We simulate the assimilated propagation links by performing ray tracing through GPSII-produced ionosphere and observe that simulated data are indeed in agreement with assimilated measurements.

  7. The stability of the bifluoride ion (HF - 2) in the gas phase (United States)

    Heni, Martin; Illenberger, Eugen


    The bifluoride ion (HF-2) has been generated by dissociative electron attachment to trans-1,2-difluorethylene and cis-1,2-difluoroethylene. Evaluation of the energetics for these reactions leads to ΔH0f (HF-2) ≤-6.9 eV and E. A. (HF2)≥4.8 eV.

  8. Photon strength function in the Hf-181 nucleus by method of two-step cascade

    CERN Document Server

    Le Hong Khiem


    The applicability of sum-coincidence measurements of two-step cascade gamma ray spectra determining Photon Strength Function (PSF) of Hf-181 induced from Hf-180 (n,2 gamma) Hf-181 reaction is presented. Up to 80% intensity of the primary gamma ray transitions in a wide energy range have been deduced and compared to model calculation.

  9. Suppression Factor of ~(182)W for ~(182)Hf AMS at CIAE

    Institute of Scientific and Technical Information of China (English)


    Suppression factor of 182W is an important index in the measurement of 182Hf with AMS method. This factor is defined as the value of 182W/180Hf in blank samples divised by the measured value of 182 W/180Hf with AMS method. In order to satisfy a

  10. 40 CFR 180.1273 - Beauveria bassiana HF23; exemption from the requirement of a tolerance. (United States)


    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Beauveria bassiana HF23; exemption... FOOD Exemptions From Tolerances § 180.1273 Beauveria bassiana HF23; exemption from the requirement of a tolerance. Residues of Beauveria bassiana HF23 are exempt from the requirement of a tolerance on all...

  11. Semantic analysis of links in the musical Wikipedia

    DEFF Research Database (Denmark)

    Mølgaard, Lasse Lohilahti; Hansen, Lars Kai; Larsen, Jan


    Wikipedia has significant potential in music information retrieval research. In this work we analyze the of the link structure in the musical Wikipedia. Wikipedia links differ in certain ways from links on the Web at large. There are an over-abundance of internal links in Wikipedia, links...... are generated automatically, and they may even maliciously be used to promote certain topics. Wikipedia has been analyzed recently using methods fromWeb and text mining, however, the fact the link structure is different from the Web’s makes this approach questionable. To better understand the link structure...

  12. Automatic Kurdish Dialects Identification

    Directory of Open Access Journals (Sweden)

    Hossein Hassani


    Full Text Available Automatic dialect identification is a necessary Lan guage Technology for processing multi- dialect languages in which the dialects are linguis tically far from each other. Particularly, this becomes crucial where the dialects are mutually uni ntelligible. Therefore, to perform computational activities on these languages, the sy stem needs to identify the dialect that is the subject of the process. Kurdish language encompasse s various dialects. It is written using several different scripts. The language lacks of a standard orthography. This situation makes the Kurdish dialectal identification more interesti ng and required, both form the research and from the application perspectives. In this research , we have applied a classification method, based on supervised machine learning, to identify t he dialects of the Kurdish texts. The research has focused on two widely spoken and most dominant Kurdish dialects, namely, Kurmanji and Sorani. The approach could be applied to the other Kurdish dialects as well. The method is also applicable to the languages which are similar to Ku rdish in their dialectal diversity and differences.

  13. Automatic aircraft recognition (United States)

    Hmam, Hatem; Kim, Jijoong


    Automatic aircraft recognition is very complex because of clutter, shadows, clouds, self-occlusion and degraded imaging conditions. This paper presents an aircraft recognition system, which assumes from the start that the image is possibly degraded, and implements a number of strategies to overcome edge fragmentation and distortion. The current vision system employs a bottom up approach, where recognition begins by locating image primitives (e.g., lines and corners), which are then combined in an incremental fashion into larger sets of line groupings using knowledge about aircraft, as viewed from a generic viewpoint. Knowledge about aircraft is represented in the form of whole/part shape description and the connectedness property, and is embedded in production rules, which primarily aim at finding instances of the aircraft parts in the image and checking the connectedness property between the parts. Once a match is found, a confidence score is assigned and as evidence in support of an aircraft interpretation is accumulated, the score is increased proportionally. Finally a selection of the resulting image interpretations with the highest scores, is subjected to competition tests, and only non-ambiguous interpretations are allowed to survive. Experimental results demonstrating the effectiveness of the current recognition system are given.

  14. Electronic amplifiers for automatic compensators

    CERN Document Server

    Polonnikov, D Ye


    Electronic Amplifiers for Automatic Compensators presents the design and operation of electronic amplifiers for use in automatic control and measuring systems. This book is composed of eight chapters that consider the problems of constructing input and output circuits of amplifiers, suppression of interference and ensuring high sensitivity.This work begins with a survey of the operating principles of electronic amplifiers in automatic compensator systems. The succeeding chapters deal with circuit selection and the calculation and determination of the principal characteristics of amplifiers, as

  15. The Automatic Telescope Network (ATN)

    CERN Document Server

    Mattox, J R


    Because of the scheduled GLAST mission by NASA, there is strong scientific justification for preparation for very extensive blazar monitoring in the optical bands to exploit the opportunity to learn about blazars through the correlation of variability of the gamma-ray flux with flux at lower frequencies. Current optical facilities do not provide the required capability.Developments in technology have enabled astronomers to readily deploy automatic telescopes. The effort to create an Automatic Telescope Network (ATN) for blazar monitoring in the GLAST era is described. Other scientific applications of the networks of automatic telescopes are discussed. The potential of the ATN for science education is also discussed.

  16. Two-dimensional semiconductor HfSe{sub 2} and MoSe{sub 2}/HfSe{sub 2} van der Waals heterostructures by molecular beam epitaxy

    Energy Technology Data Exchange (ETDEWEB)

    Aretouli, K. E.; Tsipas, P.; Tsoutsou, D.; Marquez-Velasco, J.; Xenogiannopoulou, E.; Giamini, S. A.; Vassalou, E.; Kelaidis, N.; Dimoulas, A., E-mail: [Institute of Nanoscience and Nanotechnology, National Center for Scientific Research “Demokritos,” 15310, Aghia Paraskevi, Athens (Greece)


    Using molecular beam epitaxy, atomically thin 2D semiconductor HfSe{sub 2} and MoSe{sub 2}/HfSe{sub 2} van der Waals heterostructures are grown on AlN(0001)/Si(111) substrates. Details of the electronic band structure of HfSe{sub 2} are imaged by in-situ angle resolved photoelectron spectroscopy indicating a high quality epitaxial layer. High-resolution surface tunneling microscopy supported by first principles calculations provides evidence of an ordered Se adlayer, which may be responsible for a reduction of the measured workfunction of HfSe{sub 2} compared to theoretical predictions. The latter reduction minimizes the workfunction difference between the HfSe{sub 2} and MoSe{sub 2} layers resulting in a small valence band offset of only 0.13 eV at the MoSe{sub 2}/HfSe{sub 2} heterointerface and a weak type II band alignment.

  17. Age and origin of post collision Baltoro granites, south Karakoram, North Pakistan: Insights from in-situ U-Pb, Hf and oxygen isotopic record of zircons (United States)

    Mahar, Munazzam Ali; Mahéo, Gweltaz; Goodell, Philip C.; Pavlis, Terry L.


    Origin of post collision plutonism is critical to understand the tectonothermal evolution of the over thickened continental crust in collision zones. This has proven difficult to reconcile with the conventional whole rock geochemical and field based studies alone. We report in-situ study of zircon U-Pb, Hf and O isotopes from five samples of the Baltoro Plutonic Unit (BPU) in south Karakoram. The plutonic unit is the western part of the southern Asian margin of the India-Asia convergent zone. Baltoro granites and a biotite-rich enclave yielded similar and overlapping U-Pb ages ranging from 26 to 15 Ma. Hafnium isotopic composition (εHf (0)) is very heterogeneous ranging from - 17.1 to + 4.4 while the oxygen isotopic composition of the granites is homogeneous with mean δ18O ranging from 7.2 to 9.4‰. Based on U-Pb geochronology and Hf-O isotopic composition, the involvement of two main sources is suggested (1) Cretaceous calc-alkaline Karakoram crust and (2) Karakoram gneisses. Moreover, possible involvement of metasomatized Asian lithospheric mantle is supported by elevated oxygen composition of granites and identical Hf composition of biotite-rich enclave to the mantle derived Baltoro lamprophyre. However, direct contribution from juvenile pristine mantle is unlikely as no juvenile mantle type Hf and oxygen values were obtained. This also precludes the involvement of southward juvenile arc related component of Kohistan-Ladakh batholith. Our new U-Pb and Hf data are comparable to the Mesozoic Karakoram batholith, Miocene two-mica leucogranites in the Pangong Range and magmatism from the Lhasa terrane in south Tibet, suggesting a genetic link between the Karakoram and the rocks to the east. This magmatic event is best explained by lower crust partial melting promoted by both thermal equilibration following crustal thickening and heat advection by ultrapotassic magmas associated with the breakoff of the Indian continental margin.

  18. Neuro-fuzzy system modeling based on automatic fuzzy clustering

    Institute of Scientific and Technical Information of China (English)

    Yuangang TANG; Fuchun SUN; Zengqi SUN


    A neuro-fuzzy system model based on automatic fuzzy clustering is proposed.A hybrid model identification algorithm is also developed to decide the model structure and model parameters.The algorithm mainly includes three parts:1) Automatic fuzzy C-means (AFCM),which is applied to generate fuzzy rules automatically,and then fix on the size of the neuro-fuzzy network,by which the complexity of system design is reducesd greatly at the price of the fitting capability;2) Recursive least square estimation (RLSE).It is used to update the parameters of Takagi-Sugeno model,which is employed to describe the behavior of the system;3) Gradient descent algorithm is also proposed for the fuzzy values according to the back propagation algorithm of neural network.Finally,modeling the dynamical equation of the two-link manipulator with the proposed approach is illustrated to validate the feasibility of the method.

  19. Clothes Dryer Automatic Termination Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    TeGrotenhuis, Ward E.


    Volume 2: Improved Sensor and Control Designs Many residential clothes dryers on the market today provide automatic cycles that are intended to stop when the clothes are dry, as determined by the final remaining moisture content (RMC). However, testing of automatic termination cycles has shown that many dryers are susceptible to over-drying of loads, leading to excess energy consumption. In particular, tests performed using the DOE Test Procedure in Appendix D2 of 10 CFR 430 subpart B have shown that as much as 62% of the energy used in a cycle may be from over-drying. Volume 1 of this report shows an average of 20% excess energy from over-drying when running automatic cycles with various load compositions and dryer settings. Consequently, improving automatic termination sensors and algorithms has the potential for substantial energy savings in the U.S.

  20. Prospects for de-automatization. (United States)

    Kihlstrom, John F


    Research by Raz and his associates has repeatedly found that suggestions for hypnotic agnosia, administered to highly hypnotizable subjects, reduce or even eliminate Stroop interference. The present paper sought unsuccessfully to extend these findings to negative priming in the Stroop task. Nevertheless, the reduction of Stroop interference has broad theoretical implications, both for our understanding of automaticity and for the prospect of de-automatizing cognition in meditation and other altered states of consciousness.

  1. Process automatization in system administration


    Petauer, Janja


    The aim of the thesis is to present automatization of user management in company Studio Moderna. The company has grown exponentially in recent years, that is why we needed to find faster, easier and cheaper way of man- aging user accounts. We automatized processes of creating, changing and removing user accounts within Active Directory. We prepared user interface inside of existing application, used Java Script for drop down menus, wrote script in scripting programming langu...

  2. Automatic Sarcasm Detection: A Survey


    Joshi, Aditya; Bhattacharyya, Pushpak; Carman, Mark James


    Automatic sarcasm detection is the task of predicting sarcasm in text. This is a crucial step to sentiment analysis, considering prevalence and challenges of sarcasm in sentiment-bearing text. Beginning with an approach that used speech-based features, sarcasm detection has witnessed great interest from the sentiment analysis community. This paper is the first known compilation of past work in automatic sarcasm detection. We observe three milestones in the research so far: semi-supervised pat...

  3. Automatic Coarse Graining of Polymers


    Faller, Roland


    Several recently proposed semi--automatic and fully--automatic coarse--graining schemes for polymer simulations are discussed. All these techniques derive effective potentials for multi--atom units or super--atoms from atomistic simulations. These include techniques relying on single chain simulations in vacuum and self--consistent optimizations from the melt like the simplex method and the inverted Boltzmann method. The focus is on matching the polymer structure on different scales. Several ...

  4. The automatization of journalistic narrative

    Directory of Open Access Journals (Sweden)

    Naara Normande


    Full Text Available This paper proposes an initial discussion about the production of automatized journalistic narratives. Despite being a topic discussed in specialized sites and international conferences in communication area, the concepts are still deficient in academic research. For this article, we studied the concepts of narrative, databases and algorithms, indicating a theoretical trend that explains this automatized journalistic narratives. As characterization, we use the cases of Los Angeles Times, Narrative Science and Automated Insights.

  5. Charge storage characteristics and tunneling mechanism of amorphous Ge-doped HfOx films (United States)

    Qiu, X. Y.; Zhang, S. Y.; Zhang, T.; Wang, R. X.; Li, L. T.; Zhang, Y.; Dai, J. Y.


    Amorphous Ge-doped HfOx films have been deposited on p-Si(100) substrates by means of RF magnetron sputtering. Microstructural investigations reveal the partial oxidation of doped Ge atoms in the amorphous HfOx matrix and the existence of HfSiOx interfacial layer. Capacitance-voltage hysteresis of the Ag-/Ge-doped HfOx/Si/Ag memory capacitor exhibits a memory window of 3.15 V which can maintain for >5 × 104 cycles. Current-voltage characteristics reveal that Poole-Frenkel tunneling is responsible for electron transport in the Ge-doped HfOx film.

  6. Clinical trials update from the Heart Failure Society of America Meeting 2009: FAST, IMPROVE-HF, COACH galectin-3 substudy, HF-ACTION nuclear substudy, DAD-HF, and MARVEL-1. (United States)

    Lainscak, Mitja; Coletta, Alison P; Sherwi, Nasser; Cleland, John G F


    This article presents findings and a commentary on late-breaking trials presented during the meeting of the Heart Failure Society of America in September 2009. Unpublished reports should be considered as preliminary, since analyses may change in the final publication. The FAST trial showed somewhat better performance of intrathoracic impedance for prediction of deterioration in patients with heart failure (HF) when compared with daily weighing. The IMPROVE-HF study reported the benefits of education on the management of patients with systolic HF. Galectin-3 appeared a useful method for improving risk stratification of patients with chronic HF in a substudy of the COACH trial. A nuclear substudy of the HF-ACTION trial failed to demonstrate that resting myocardial perfusion imaging, a measure of myocardial scar and viability, was clinically useful. A small randomized controlled trial (DAD-HF) suggested that the use of low-dose dopamine in patients with acutely decompensated HF was associated with less deterioration in renal function and less hypokalaemia. The MARVEL-1 trial raises further concerns about the safety of myoblast transplantation in ischaemic HF.

  7. The anisotropy of Hf diffusion in {alpha}-Zr

    Energy Technology Data Exchange (ETDEWEB)

    Hood, G.M. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.]|[Metals Technology Laboratory, CANMET, Ottawa, Ontario (Canada); Zou, H. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.]|[Metals Technology Laboratory, CANMET, Ottawa, Ontario (Canada); Roy, J.A. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.]|[Metals Technology Laboratory, CANMET, Ottawa, Ontario (Canada); Schultz, R.J. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.]|[Metals Technology Laboratory, CANMET, Ottawa, Ontario (Canada); Matsuura, N. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.]|[Metals Technology Laboratory, CANMET, Ottawa, Ontario (Canada); Jackman, J.A. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.]|[Metals Technology Laboratory, CANMET, Ottawa, Ontario (Canada)


    Hf diffusion coefficients (D) have been measured ({proportional_to}870-1100 K) in directions parallel (D{sub pa}) and perpendicular (D{sub pe}) to the c-axis of double-faced, single-crystal specimens of both high purity (HP) and nominally pure (NP) {alpha}-Zr. The diffusion profiles were measured by secondary ion mass spectrometry. Hf diffusion in HP {alpha}-Zr is characterised by an activation energy of about 3.0 eV and a pre-exponential factor of about 10{sup -5} m{sup 2}/s. The anisotropy ratio, D{sub pa}/D{sub pe}, is {proportional_to}<1.0 for the HP specimens and mostly >1.0 for the NP specimens. A dependence of D on diffusion time/depth is indicated for some experiments on NP Zr. (orig.).

  8. Photodetachment of HF-in an Electric Field

    Institute of Scientific and Technical Information of China (English)

    WANG De-Hua


    @@ Photdetachment of a negative HF-ion in an electric field is studied by using the two-centre model and the closed orbit theory.An analytic formula is presented for the electron flux of HF- in the presence of an electric field.The results show that the oscillation in the electron flux distribution is caused by the rescattering effect of the molecular ion core and the interference betweed the two nuclei.In addition,the interference between the orbits passing through the given spatial point also plays an important role in the electron flux distribution.This study provides a new understanding of the photodetachment of polar molecules in the presence of external field.

  9. Generation of ionospheric ducts by the HAARP HF heater

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, J A; Pradipta, R; Burton, L M; Labno, A; Lee, M C [Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Watkins, B J; Fallen, C [University of Alaska Fairbanks, Fairbanks, AK 99775 (United States); Kuo, S P [New York University, Brooklyn, NY 11201 (United States); Burke, W J [Air Force Research Laboratory, Hanscom AFB, MA 01731 (United States); Mabius, D; See, B Z, E-mail: [Boston University, Boston, MA 02215 (United States)


    We report an investigation of ionospheric ducts having the shape of large plasma sheets, generated by vertically transmitted HAARP HF heater waves in several experiments conducted in Gakona, Alaska. Theory predicts that O-mode heater wave-created ionospheric ducts form parallel-plate waveguides within the meridional plane, and those generated by the X-mode heater waves are orthogonal to the meridional plane. Our theoretical prediction is supported by measurements of ionosonde data (namely ionograms), range-time-intensity (RTI) plots of UHF and HF backscatter radars, as well as magnetometer data analyses. When these plasma sheets experienced ExB drifts, they were intercepted by the HAARP UHF radar and seen as slanted stripes in the RTI plots. This striking feature was also observed in our earlier experiments using the Arecibo UHF radar.

  10. Use of GPS network data for HF Doppler measurements interpretation

    CERN Document Server

    Petrova, Inna R; Latypov, Ruslan R


    The method of measurement of Doppler frequency shift of ionospheric signal - HF Doppler technique - is one of well-known and widely used methods of ionosphere research. It allows to research various disturbances in the ionosphere. There are some sources of disturbances in the ionosphere. These are geomagnetic storms, solar flashes, metrological effects, atmospheric waves. This method allows to find out the influence of earthquakes, explosions and other processes on the ionosphere, which occur near to the Earth. HF Doppler technique has the high sensitivity to small frequency variations and the high time resolution, but interpretation of results is difficult. In this work we make an attempt to use GPS data for Doppler measurements interpretation. Modeling of Doppler frequency shift variations with use of TEC allows to separate ionosphere disturbances of medium scale.

  11. Imaging HF-induced large-scale irregularities above HAARP (United States)

    Djuth, Frank T.; Reinisch, Bodo W.; Kitrosser, David F.; Elder, John H.; Snyder, A. Lee; Sales, Gary S.


    The University of Massachusetts-Lowell digisonde is used with the HAARP high-frequency (HF), ionospheric modification facility to obtain radio images of artificially-produced, large-scale, geomagnetic field-aligned irregularities. F region irregularities generated with the HAARP beam pointed in the vertical and geomagnetic field-aligned directions are examined in a smooth background plasma. It is found that limited large-scale irregularity production takes place with vertical transmissions, whereas there is a dramatic increase in the number of source irregularities with the beam pointed parallel to the geomagnetic field. Strong irregularity production appears to be confined to within ~5° of the geomagnetic zenith and does not fill the volume occupied by the HF beam. A similar effect is observed in optical images of artificial airglow.

  12. Performance Analysis of HF Band FB-MC-SS

    Energy Technology Data Exchange (ETDEWEB)

    Hussein Moradi; Stephen Andrew Laraway; Behrouz Farhang-Boroujeny


    Abstract—In a recent paper [1] the filter bank multicarrier spread spectrum (FB-MC-SS) waveform was proposed for wideband spread spectrum HF communications. A significant benefit of this waveform is robustness against narrow and partial band interference. Simulation results in [1] demonstrated good performance in a wideband HF channel over a wide range of conditions. In this paper we present a theoretical analysis of the bit error probably for this system. Our analysis tailors the results from [2] where BER performance was analyzed for maximum ration combining systems that accounted for correlation between subcarriers and channel estimation error. Equations are give for BER that closely match the simulated performance in most situations.

  13. Investigation of new type Cu-Hf-Al bulk glassy alloys (United States)

    Nagy, E.; Rontó, V.; Sólyom, J.; Roósz, A.


    In the last years new type Cu-Hf-Al ternary alloys were developed with high glass forming ability and ductility. The addition of Al to Cu-Hf alloys results in improvements in glass formation, thermal stability and mechanical properties of these alloys. We have investigated new Cu-based bulk amorphous alloys in Cu-Hf-Al ternary system. The alloys with Cu49Hf42Al9, Cu46Hf45Al9, Cu50Hf42.5Al7.5 and Cu50Hf45Al5 compositions were prepared by arc melting. The samples were made by centrifugal casting and were investigated by X-ray diffraction method. Thermodynamic properties were examined by differential scanning calorimetry and the structure of the crystallising phases by scanning electron microscopy. The determination of liquidus temperatures of alloys were measured by differential thermal analysis.

  14. First-principles studies of HF molecule adsorption on intrinsic graphene and Al-doped graphene (United States)

    Sun, Yuanyuan; Chen, Li; Zhang, Feiwu; Li, Daoyong; Pan, Hongzhe; Ye, Jun


    In the search for a high-sensitivity sensor for HF gas, the adsorption of HF molecules on both intrinsic and Al-doped graphene sheets is studied by first-principles calculations. We find that the adsorption mechanisms of HF molecules are different for intrinsic graphene and Al-doped graphene. Al-doped graphene has higher adsorption energy and shorter connecting distance to the HF molecule than intrinsic graphene. The calculated net electron transfers, electronic density difference images and densities of states give evidence that the adsorption of HF molecules on Al-doped graphene is by chemisorption, while there is weak physisorption on intrinsic graphene. Therefore, Al-doped graphene can be expected to have applications as a novel sensor for the detection of HF gas. The HF molecules adsorbed on Al-doped graphene material can be reactivated by applying an external electric field of 0.013 a.u.

  15. Ferroelectric HfO2 for Emerging Ferroelectric Semiconductor Devices (United States)

    Florent, Karine

    The spontaneous polarization in ferroelectrics (FE) makes them particularly attractive for non-volatile memory and logic applications. Non-volatile FRAM memories using perovskite structure materials, such as Lead Zirconate Titanate (PZT) and Strontium Bismuth Tantalate (SBT) have been studied for many years. However, because of their scaling limit and incompatibility with CMOS beyond 130 nm node, floating gate Flash memory technology has been preferred for manufacturing. The recent discovery of ferroelectricity in doped HfO2 in 2011 has opened the door for new ferroelectric based devices compatible with CMOS technology, such as Ferroelectric Field Effect Transistor (FeFET) and Ferroelectric Tunnel Junctions (FTJ). This work began with developing ferroelectric hysteresis characterization capabilities at RIT. Initially reactively sputtered aluminum doped HfO 2 films were investigated. It was observed that the composition control using co-sputtering was not achievable within the existing capabilities. During the course of this study, collaboration was established with the NaMLab group in Germany to investigate Si doped HfO2 deposited by Atomic Layer Deposition (ALD). Metal Ferroelectric Metal (MFM) devices were fabricated using TiN as the top and bottom electrode with Si:HfO2 thickness ranging from 6.4 nm to 22.9 nm. The devices were electrically tested for P-E, C-V and I-V characteristics. Structural characterizations included TEM, EELS, XRR, XRD and XPS/Auger spectroscopy. Higher remanant polarization (Pr) was observed for films of 9.3 nm and 13.1 nm thickness. Thicker film (22.9 nm) showed smaller Pr. Devices with 6.4 nm thick films exhibit tunneling behavior showing a memristor like I-V characteristics. The tunnel current and ferroelectricity showed decrease with cycling indicating a possible change in either the structure or the domain configurations. Theoretical simulations using the improved FE model were carried out to model the ferroelectric behavior of

  16. Centrifugal stretching of 170Hf in the interacting boson model

    Directory of Open Access Journals (Sweden)

    Werner V.


    Full Text Available We present the results of a recent experiment to deduce lifetimes of members of the ground state rotational band of 170Hf, which show the effect of centrifugal stretching in this deformed isotope. Results are compared to the geometrical confined beta-soft(CBS rotor model, as well as to the interacting boson model (IBM. Two methods to correct for effects due to the finite valence space within the IBM are proposed.

  17. Electrochemical characterization of cast Ti-Hf binary alloys. (United States)

    Cai, Z; Koike, M; Sato, H; Brezner, M; Guo, Q; Komatsu, M; Okuno, O; Okabe, T


    This study characterized the electrochemical behavior of Ti-Hf binary alloys in a simulated oral environment. Ti-Hf alloys (10, 20, 25, 30, 35 and 40 mass% Hf) were prepared by arc-melting titanium sponge and hafnium sponge. Specimens of each alloy (n = 4) were prepared using a dental titanium casting system with a MgO-based investment. Specimens were inspected with X-ray radiography to ensure minimal internal porosity. Castings (n = 4) made from pure titanium and commercially pure titanium were used as controls. The ground flat surface (10 mm x 10 mm) on each specimen where approximately 30 microm was removed was used for the characterization. Sixteen-hour open-circuit potential (OCP) measurement, linear polarization and potentiodynamic cathodic polarization were performed sequentially in aerated (air + 10% CO2) MTZ synthetic saliva at 37 degrees C. Potentiodynamic anodic polarization was conducted in the same medium but deaerated (N2 + 10% CO2) 2 h before and during testing. Polarization resistance (R(P)) and Tafel slopes were determined, as were corrosion current density (I(CORR)) and passive current density (I(PASS)). Results were subjected to nonparametric statistical analysis (alpha = 0.05). The OCP stabilized (mean values -229 mV to -470 mV vs. SCE) for all specimens after the 16-h immersion. Similar passivation was observed for all the metals on their anodic polarization diagrams. The Kruskal-Wallis test showed significant differences in OCP among the test groups (p = 0.006). No significant differences were found in R(P), I(CORR) or I(PASS) among all the metals (p>0.3). Results indicate that the electrochemical behavior of the Ti-Hf alloys examined resembles that of pure titanium.

  18. Self-healing structural properties of thermoplastics in HF field

    Directory of Open Access Journals (Sweden)

    N. G. Filippenko


    Full Text Available The article concerns one of the possible ways for safe operation of polymer products with initiating a process of their self-healing. This is especially true for products from polymer materials, used in hard-to-reach areas and units of machines and mechanisms. In this regard, the aim of this study was to develop techniques for a self-healing process of the mechanical properties of products from polymer materials.To achieve this goal, the author has solved problems to define a complex method of HF self-healing of polymer material: damage detection in products from polymer materials, determination of signal initiating the recovery process, determining the efficiency of material regeneration. The present study uses proposed and developed by the author methods for the determination of necessary and sufficient indicators of the strength characteristics of products under realmeteorological and climatic conditions of their operation.To determine the practical results of the developed algorithm for self-healing the polymer products in the HF field, a series of experimental studies has been conducted to regenerate the polyamide cage fatigue destruction of the rolling stock axle equipment of Russian Railways JSC.The obtained results of the strength characteristics of the material under investigation prove the self-healing process of polymer materials in HF field.According to research results, the conclusion is drawn that it is required to provide a technological HF self-healing process of products from polymer materials. The created algorithm of regeneration enables a new approach to study the effects of electromagnetic fields on polymer and polymer-based composite materials when solving the practical tasks to improve the quality of repairing parts from thermoplastics.

  19. Hf--Co--B alloys as permanent magnet materials (United States)

    McGuire, Michael Alan; Rios, Orlando; Ghimire, Nirmal Jeevi


    An alloy composition is composed essentially of Hf.sub.2-XZr.sub.XCo.sub.11B.sub.Y, wherein 0B.sub.Y, wherein 0.ltoreq.X<2 and 0

  20. Ionizing wave via high-power HF acceleration

    CERN Document Server

    Mishin, Evgeny


    Recent ionospheric modification experiments with the 3.6 MW transmitter at the High Frequency Active Auroral Research Program (HAARP) facility in Alaska led to discovery of artificial ionization descending from the nominal interaction altitude in the background F-region ionosphere by ~60 km. This paper presents a physical model of an ionizing wavefront created by suprathermal electrons accelerated by the HF-excited plasma turbulence.

  1. Study on Preparation of 182Hf AMS Standards

    Institute of Scientific and Technical Information of China (English)

    YINXin-yi; JIANGShan; HEMing; ZHANGChun-hua; ZHANGSheng-dong


    The neutron-rich isotope 182Hf with its half-life of (9±2)×106 a produced by neutron activation can be used to determine the neutron flux of some places, in order to study the transport of radioactive nuclides and the safe disposal of nuclear waste. AMS is a kind of relative measurement method with high sensitivity (10-15), it requires corresponding standard samples.

  2. Ionizing wave via high-power HF acceleration


    Mishin, Evgeny; Pedersen, Todd


    Recent ionospheric modification experiments with the 3.6 MW transmitter at the High Frequency Active Auroral Research Program (HAARP) facility in Alaska led to discovery of artificial ionization descending from the nominal interaction altitude in the background F-region ionosphere by ~60 km. This paper presents a physical model of an ionizing wavefront created by suprathermal electrons accelerated by the HF-excited plasma turbulence.

  3. On the Onset of HF-Induced Airglow at HAARP (United States)


    AFRL-VS-HA-TR-2005-1061 JOURNAL OF GEOPHYSICAL RESEARCH, VOL. 109, A02305, doi:10.1029/2003JA010205, 2004 On the onset of HF-induced airglow at HAARP ...line) during the February 2002 campaign at the High Frequency Active Auroral Research Program ( HAARP ) heating facility are analyzed. We find that... HAARP , J. Geophys. Res., 109, A02305, doi: 10.1029/2003JA010205. 1. Introduction known as the parametric decay (PDI) or oscillating two- [2] A

  4. HF Over-the-Horizon Radar System Performance Analysis (United States)


    target detection technique and radar equations are applied. Chapter V uses PROPLAB model simulation to bring in the principle of raytracing and... RADAR SYSTEM PERFORMANCE ANALYSIS by Bin-Yi Liu September 2007 Thesis Co-Advisors: Phillip E. Pace Jeffrey B. Knorr THIS PAGE...Thesis 4. TITLE AND SUBTITLE HF Over-the-Horizon Radar System Performance Analysis 6. AUTHOR(S) Bin-Yi Liu 5. FUNDING NUMBERS 7. PERFORMING

  5. Wideband high frequency (HF) skywave channel parameters from narrowband measurements (United States)

    Hausman, Cynthia L.; Uffelman, Donald R.; Walton, Thomas L.

    The HF wideband channel allow the use of spread-spectrum techniques to provide covert communications with low probability of intercept (LPI) and antijam protection. The objective of this work is to determine the extent to which oblique narrowband channel measurements can be used to infer effects in the wideband skywave channel. If oblique narrowband channel measurements can be used as a basis for developing wideband channel models, a large number of existing narrowband measurements can be made available for this task.

  6. Detection of HCl and HF by TTFMS and WMS. (United States)

    De Luca, Anna Chiara; Pesce, Giuseppe; Rusciano, Giulia; Sasso, Antonio


    In this work we discuss on a compact spectrometer based on DFB diode lasers for detection of chloridric and fluoridric acids. HCl and HF concentrations are determined through optical absorption of the P(4) line (lambda=1.7 microm) and the R(3) line (lambda=1.3 microm), respectively. Both lines belong to first overtone vibrational bands and their line strengths are 7.8 x 10(-21)cm/molecule for HCl and 2.8 x 10(-20)cm/molecule for HF. We chose these lines for their relative high intensities and because they are quite far from water vapour lines which represent the main interfering gas for trace-gases analysis. To detect these species we used two different high frequency modulation techniques: two-tone frequency modulation spectroscopy (f(1)=800 MHz and f(2)=804 MHz) was used for HCl while for HF we followed a simpler approach based on wavelength modulation spectroscopy (f=600 kHz). We demonstrate that the two techniques provide comparable detection limit of about 80 ppbV at atmospheric pressure. Positive testing of our spectrometer makes it suitable for in situ measurements of exhaust gases coming from waste incinerators.

  7. Multiple excitation modes in 163Hf

    DEFF Research Database (Denmark)

    Yadav, Rachita; Ma, J.C.; Marsh, J.C.


    Excited states of Hf163 were populated using the Zr94(Ge74,5n) reaction and the decay γ rays were measured with the Gammasphere spectrometer. Two previously known bands were extended to higher spins, and nine new bands were identified. In addition to bands associated with three- and five-quasipar......Excited states of Hf163 were populated using the Zr94(Ge74,5n) reaction and the decay γ rays were measured with the Gammasphere spectrometer. Two previously known bands were extended to higher spins, and nine new bands were identified. In addition to bands associated with three- and five......-quasiparticle configurations, two γ−vibrational bands coupled to the i13/2 excitation were also observed. The lowest level of a newly identified, negative-parity band is proposed to be the ground state of the nucleus. A systematic delay of the high-spin proton crossing frequency with increasing quadrupole deformation from Hf...

  8. Electronic structures and properties of Ti, Zr and Hf metals

    Institute of Scientific and Technical Information of China (English)


    The electronic structures of pure Ti, Zr and Hf metals with hcp structure were determined by one-atom (OA) theory. According to the electronic structures of these metals,their potential curves, cohesive energies, lattice constants, elasticities and the temperature dependence of linear thermal expansion coefficients were calculated. The electronic structures and characteristic properties of these metals with bcc and fcc structures and liquids were also studied. The results show that the electronic structures of Ti, Zr and Hf metals are respectively [Ar](3dn)0.481 0(3dc)2.085 7(4sc)1.000 0(4sf)0.433 3, [Kr](4dn)0.396 8(4dc)2.142 8(5sc)1.262 0(5sf)0.198 4, [Xe](5dn)0.368 0(5dc)2.041 4(6sc)1.406 6(6sf)0.184 0. It is explained why the pure Ti, Zr and Hf metals with hcp and bcc structures can exist naturally, while those with fcc structure can not.

  9. Lu-Hf and Sm-Nd garnet geochronology

    DEFF Research Database (Denmark)

    Smit, Matthijs Arjen; Scherer, Erik E.; Mezger, Klaus


    are similar among grains having radii larger than 1.3 mm (weighted mean: 2714±6 Ma2714±6 Ma; 2 s.d.) and up to 20 Myr younger for finer fractions. In contrast, Sm–Nd dates are equal to or younger than the 2641–2637 Ma age of peak metamorphism. The roles of concurrently digested inclusions and core–rim Lu......To investigate the systematics of the 176Lu–176Hf and 147Sm–143Nd garnet chronometers, we performed REE and isotope analyses on garnet crystals of different size (0.55–3.1 mm radius) from a single granulite specimen (Archean Pikwitonei Granulite Domain, Manitoba, Canada). The Lu–Hf dates....../Sm fractionation are quantitatively evaluated and excluded as causes for the observed age heterogeneity. Instead, the isotope dates are interpreted to reflect partial loss of radiogenic 176Hf and 143Nd, and are used to constrain the systematics of the garnet chronometers at high temperature. The data constrain...

  10. TID measurement using oblique transmissions of HF pulses (United States)

    Galkin, Ivan; Reinisch, Bodo; Huang, Xueqin; Paznukhov, Vadym; Hamel, Ryan; Kozlov, Alexander; Belehaki, Anna


    The Traveling Ionospheric Disturbance (TID), a wave-like signature of moving plasma density modulation in the ionosphere, is widely acknowledged for its utility in backtracking the anomalous events responsible for the TID generation, and as a major inconvenience to high-frequency (HF) operational systems because of its deleterious impact on the accuracy of navigation and geolocation. The pilot project "Net-TIDE" for the real-time detection and evaluation of TIDs began its operation in 2016 based on the remote-sensing data from synchronized, network-coordinated HF sounding between pairs of DPS4D ionosondes at five participating observatories in Europe. Measurement of all signal properties (Doppler frequency, angle of arrival, and time-of-flight from transmitter to receiver) proved to be instrumental in detecting the TID and deducing the TID parameters: amplitude, wavelength, phase velocity, and direction of propagation. Processing of the measured HF signal data required a specialized signal processing technique that is capable of consistently extracting different signals that have propagated along different ionospheric paths. The multi-path signal environment proved to be the greatest challenge for the reliable TID specification by Net-TIDE, demanding the development of an intelligent system for "signal tracking". The intelligent system is based on a neural network model of a pre-attentive vision capable of extracting continuous signal tracks from the multi-path signal ensemble. Specific examples of the Net-TIDE algorithm suite operation and its suitability for a fully automated TID warning service are discussed.

  11. High-spin positive-parity states in 179Hf studied by the 180Hf(τ, α) 179Hf reaction AT 32 MeV (United States)

    Thorsteinsen, T. F.; Løvhøiden, G.; Vaagen, J. S.; Bjørnberg, A.; Burke, D. G.


    Full angular distributions are presented for states populated in the reaction 180Hf(τ, α) 179Hf at 32 MeV beam energy. Positive-parity states associated with the i {13}/{2} unique parity intruder orbital are given special attention. Thus, angular distributions for the five first members of the [624 {9}/{2}] groundstate sequence are given, as well as for a number of more highly excited states, some being new assignments. The distribution of l = 6 transfer strength is quite characteristic, two {13}/{2}+ states being substantially more populated than the rest. The characteristic features of the data are explained by a quasiparticle-rotor calculation employing deformed Woods-Saxon orbitals, but only if the hexadecapole shape parameter of the nuclear potential is β 4 ˜ -0.08. The often anomalous differential cross sections for I π ≠ {13}/{2}+ band members are well accounted for by a rotor model CCBA calculation employing transfer form factors extracted from the orbitals of the deformed Woods-Saxon field, and including non-adiabatic Coriolis mixing effects.

  12. Hf isotopic compositions of the standard zircons for U-Pb dating

    Institute of Scientific and Technical Information of China (English)

    XU Ping; WU Fuyuan; XIE Liewen; YANG Yueheng


    Using the newly published Yb isotopic abundances and the mass bias relationship between Yb and Hf, we carried out an analysis of Hf isotopes in the standard zircon 91500 by means of 193 nm laser attached to Neptune multi-collector ICP-MS (LA-MC-ICPMS). The obtained Hf isotopic data, in either in situ or line scan modes, are not only identical for different spot sizes, but also are consistent with previously published results obtained on TIMS or other MC-ICPMS machines within errors. This indicates that it is possible to obtain reliable 176Hf/177Hf isotopic ratios for zircon in either in situ or line scan conditions on LA-MC-ICPMS machine, and the applied procedures in our study for elemental interfering correction are appropriate for the purpose of acquiring satisfactory accuracy for Hf isotope analyses. The Hf isotopic compositions of four zircon standards in high spatial resolution U-Pb dating, 91500, CZ3,CN92-1 and TEMORA, are measured, respectively. The obtained 176Hf/177Hf ratios are 0.282316+4 (n = 34, 2σ) for 91500, 0.281704±6 (n = 16, 2σ) for CZ3, 0.282200±6 (n = 20,2σ-) for CN92-1 and 0.282684±14 (n = 24, 2σ) for TEMORA,respectively, with 176Lu/177Hf ratios of ~0.00031, 0.000036,0.00083 and 0.00127. Zircons 91500 and CZ3 show narrower variations in 176Hf/177Hf and 176Lu/177Hf ratios than those of zircons CN92-1 and TEMORA, and thus are appropriate standards for the Hf isotope analysis.

  13. Exploiting Social Annotation for Automatic Resource Discovery

    CERN Document Server

    Plangprasopchok, Anon


    Information integration applications, such as mediators or mashups, that require access to information resources currently rely on users manually discovering and integrating them in the application. Manual resource discovery is a slow process, requiring the user to sift through results obtained via keyword-based search. Although search methods have advanced to include evidence from document contents, its metadata and the contents and link structure of the referring pages, they still do not adequately cover information sources -- often called ``the hidden Web''-- that dynamically generate documents in response to a query. The recently popular social bookmarking sites, which allow users to annotate and share metadata about various information sources, provide rich evidence for resource discovery. In this paper, we describe a probabilistic model of the user annotation process in a social bookmarking system We then use the model to automatically find resources relevant to a particular information dom...

  14. Electrical characteristics of MOS capacitor with HfTiON gate dielectric and HfTiSiON interlayer

    Institute of Scientific and Technical Information of China (English)

    Chen Wei-Bing; Xu Jing-Ping; Lai Pui-To; Li Yan-Ping; Xu Sheng-Guo; Chan Chu-Lok


    The paper reports that HfTiO dielectric is deposited by reactive co-sputtering of Hf and Ti targets in an Ar/O2 ambience, followed by an annealing in different gas ambiences of N2, NO and NHa at 600°C for 2 min. Capacitance-voltage and gate-leakage properties are characterized and compared. The results indicate that the NO-annealed sample exhibits the lowest interface-state and dielectric-charge densities and best device reliability. This is attributed to the fact that nitridation can create strong Si≡N bonds to passivate dangling Si bonds and replace strained Si- O bonds, thus the sample forms a hardened dielectric/Si interface with high reliability.

  15. Nightside studies of coherent HF Radar spectral width behaviour

    Directory of Open Access Journals (Sweden)

    E. E. Woodfield

    Full Text Available A previous case study found a relationship between high spectral width measured by the CUTLASS Finland HF radar and elevated electron temperatures observed by the EISCAT and ESR incoherent scatter radars in the post-midnight sector of magnetic local time. This paper expands that work by briefly re-examining that interval and looking in depth at two further case studies. In all three cases a region of high HF spectral width (>200 ms-1 exists poleward of a region of low HF spectral width (<200 ms-1. Each case, however, occurs under quite different geomagnetic conditions. The original case study occurred during an interval with no observed electrojet activity, the second study during a transition from quiet to active conditions with a clear band of ion frictional heating indicating the location of the flow reversal boundary, and the third during an isolated sub-storm. These case studies indicate that the relationship between elevated electron temperature and high HF radar spectral width appears on closed field lines after 03:00 magnetic local time (MLT on the nightside. It is not clear whether the same relationship would hold on open field lines, since our analysis of this relationship is restricted in latitude. We find two important properties of high spectral width data on the nightside. Firstly the high spectral width values occur on both open and closed field lines, and secondly that the power spectra which exhibit high widths are both single-peak and multiple-peak. In general the regions of high spectral width (>200 ms-1 have more multiple-peak spectra than the regions of low spectral widths whilst still maintaining a majority of single-peak spectra. We also find that the region of ion frictional heating is collocated with many multiple-peak HF spectra. Several mechanisms for the generation of high spectral width have been proposed which would produce multiple-peak spectra, these are discussed in relation to

  16. The magnetic properties of $^{\\rm 177}$Hf and $^{\\rm 180}$Hf in the strong coupling deformed model

    CERN Document Server

    Muto, S; Bingham, C R; Stone, J R; Walker, P M; Audi, G; Gaulard, C; Köster, U; Nikolov, J; Nishimura, K; Ohtsubo, T; Podolyak, Z; Risegari, L; Simpson, G S; Veskovic, M; Walters, W B


    This paper reports NMR measurements of the magnetic dipole moments of two high-K isomers, the 37/2$^-$, 51.4 m, 2740 keV state in $^{\\rm 177}$Hf and the 8$^-$, 5.5 h, 1142 keV state in $^{\\rm 180}$Hf by the method of on-line nuclear orientation. Also included are results on the angular distributions of gamma transitions in the decay of the $^{\\rm 177}$Hf isotope. These yield high precision E2/M1 multipole mixing ratios for transitions in bands built on the 23/2$^+$, 1.1 s, isomer at 1315 keV and on the 9/2$^+$, 0.663 ns, isomer at 321 keV. The new results are discussed in the light of the recently reported finding of systematic dependence of the behavior of the g$_{\\rm R}$ parameter upon the quasi-proton and quasi-neutron make up of high-K isomeric states in this region.

  17. Automatic Analog Beamforming Transceiver for 60 GHz Radios

    CERN Document Server

    Gupta, Shalabh


    We propose a transceiver architecture for automatic beamforming and instantaneous setup of a multigigabit-per-second wireless link between two millimeter wave radios. The retro-directive architecture eliminates necessity of slow and complex digital algorithms required for searching and tracking the directions of opposite end radios. Simulations predict <5 micro-seconds setup time for a 2-Gbps bidirectional 60-GHz communication link between two 10-meters apart radios. The radios have 4-element arrayed antennas, and use QPSK modulation with 1.5 GHz analog bandwidth.

  18. Polarity reversion of the operation mode of HfO2-based resistive random access memory devices by inserting Hf metal layer. (United States)

    Peng, Ching-Shiang; Chang, Wen-Yuan; Lin, Ming-Ho; Chen, Wei-Su; Chen, Frederick; Tsai, Ming-Jinn


    The reversion of polarity within bipolar resistive switching operation occurs in Pt/HfO2/TiN and Pt/Hf/HfO2/TiN resistive random access memory devices. This reversion of voltage polarity is the result of interface generation which induces a conduction mechanism transformation from Poole-Frenkel emission to space charge limited current mechanism. To prove the reversion of polarity, this study uses curve fitting of I-V relations to verify the conduction mechanism theoretically and physical analysis to verify the oxygen ion distribution practically. The proposed Pt/Hf/HfO2/TiN devices exhibit good resistive switching characteristics, such as good uniformity, low voltage operation, robust endurance (10(3) dc sweep), and long retention (3 x 10(4) s at 85 degrees C).

  19. Vertically oriented few-layered HfS2 nanosheets: growth mechanism and optical properties (United States)

    Zheng, Binjie; Chen, Yuanfu; Wang, Zegao; Qi, Fei; Huang, Zhishuo; Hao, Xin; Li, Pingjian; Zhang, Wanli; Li, Yanrong


    For the first time, large-area, vertically oriented few-layered hafnium disulfide (V-{{{HfS}}}2) nanosheets have been grown by chemical vapor deposition. The individual {{{HfS}}}2 nanosheets are well [001] oriented, with highly crystalline quality. Far different from conventional van der Waals epitaxial growth mechanism for two-dimensional transition metal dichalcogenides, a novel dangling-bond-assisted self-seeding growth mechanism is proposed to describe the growth of V-{{{HfS}}}2 nanosheets: difficult migration of {{{HfS}}}2 adatoms on substrate surface results in {{{HfS}}}2 seeds growing perpendicularly to the substrate; V-{{{HfS}}}2 nanosheets inherit the growth direction of {{{HfS}}}2 seeds; V-{{{HfS}}}2 nanosheets further expand in the in-plane direction with time evolution. Moreover, the V-{{{HfS}}}2 nanosheets show strong and broadened photons absorption from near infrared to ultraviolet; the V-{{{HfS}}}2-based photodetector exhibits an ultrafast photoresponse time of 24 ms, and a high photosensitivity ca. 103 for 405 nm laser.

  20. Empirical Study of the Multiaxial, Thermomechanical Behavior of NiTiHf Shape Memory Alloys (United States)

    Shukla, Dhwanil; Noebe, Ronald D.; Stebner Aaron P.


    An empirical study was conducted to characterize the multiaxial, thermomechanical responses of new high temperature NiTiHf alloys. The experimentation included loading thin walled tube Ni(sub 50.3)Ti(sub 29.7)Hf(sub 20) alloy samples along both proportional and nonproportional axial-torsion paths at different temperatures while measuring surface strains using stereo digital image correlation. A Ni(sub 50.3)Ti(sub 33.7)Hf(sub 16) alloy was also studied in tension and compression to document the effect of slightly depleting the Hf content on the constitutive responses of NiTiHf alloys. Samples of both alloys were made from nearly texture free polycrystalline material processed by hot extrusion. Analysis of the data shows that very small changes in composition significantly alter NiTiHf alloy properties, as the austenite finish (Af) temperature of the 16-at Hf alloy was found to be approximately 60 C less than the 20-at Hf alloy (approximately 120 C vs. 180 C). In addition, the 16-at Hf alloy exhibited smaller compressive transformation strains (2 vs. 2.5 percent). Multi-axial characterization of the 20-at % Hf alloy showed that while the random polycrystal transformation strains in tension (4 percent) and compression (2.5 percent) are modest in comparison with binary NiTi (6 percent, 4 percent), the torsion performance is superior (7 vs. 4 shear strain width to the pseudoelastic plateau).

  1. Effects of HfB2 and HfN Additions on the Microstructures and Mechanical Properties of TiB2-Based Ceramic Tool Materials

    Directory of Open Access Journals (Sweden)

    Jing An


    Full Text Available The effects of HfB2 and HfN additions on the microstructures and mechanical properties of TiB2-based ceramic tool materials were investigated. The results showed that the HfB2 additive not only can inhibit the TiB2 grain growth but can also change the morphology of some TiB2 grains from bigger polygons to smaller polygons or longer ovals that are advantageous for forming a relatively fine microstructure, and that the HfN additive had a tendency toward agglomeration. The improvement of flexural strength and Vickers hardness of the TiB2-HfB2 ceramics was due to the relatively fine microstructure; the decrease of fracture toughness was ascribed to the formation of a weaker grain boundary strength due to the brittle rim phase and the poor wettability between HfB2 and Ni. The decrease of the flexural strength and Vickers hardness of the TiB2-HfN ceramics was due to the increase of defects such as TiB2 coarse grains and HfN agglomeration; the enhancement of fracture toughness was mainly attributed to the decrease of the pore number and the increase of the rim phase and TiB2 coarse grains. The toughening mechanisms of TiB2-HfB2 ceramics mainly included crack bridging and transgranular fracture, while the toughening mechanisms of TiB2-HfN ceramics mainly included crack deflection, crack bridging, transgranular fracture, and the core-rim structure.

  2. Crystallography of the NiHfSi Phase in a NiAl (0.5 Hf) Single-Crystal Alloy (United States)

    Garg, A.; Noebe, R. D.; Darolia, R.


    Small additions of Hf to conventionally processed NiAl single crystals result in the precipitation of a high density of cuboidal G-phase along with a newly identified silicide phase. Both of these phases form in the presence of Si which is not an intentional alloying addition but is a contaminant resulting from contact with the ceramic shell molds during directional solidification of the single-crystal ingots. The morphology, crystal structure and Orientation Relationship (OR) of the silicide phase in a NiAl (0.5 at.%Hf) single-crystal alloy have been determined using transmission electron microscopy, electron microdiffraction and energy dispersive X-ray spectroscopy. Qualitative elemental analysis and indexing of the electron microdiffraction patterns from the new phase indicate that it is an orthorhombic NiHfSi phase with unit cell parameters, a = 0.639 nm, b = 0.389 nm and c = 0.72 nm, and space group Pnma. The NiHfSi phase forms as thin rectangular plates on NiAl/111/ planes with an OR that is given by NiHfSi(100))(parallel) NiAl(111) and NiHfSi zone axes(010) (parallel) NiAl zone axes (101). Twelve variants of the NiHfSi phase were observed in the alloy and the number of variants and rectangular morphology of NiHfSi plates are consistent with symmetry requirements. Quenching experiments indicate that nucleation of the NiHfSi phase in NiAI(Hf) alloys is aided by the formation of NiAl group of zone axes (111) vacancy loops that form on the NiAl /111/ planes.

  3. An ab initio study of the C2H2-HF, C2H(CH3)-HF and C2(CH3)2-HF hydrogen-bonded complexes. (United States)

    Ramos, Mozart N; Lopes, Kelson C; Silva, Washington L V; Tavares, Alessandra M; Castriani, Fátima A; do Monte, Silmar A; Ventura, Elizete; Araújo, Regiane C M U


    MP2/6-31++G** and B3LYP/6-31++G** ab initio molecular orbital calculations have been performed in order to obtain molecular geometries, binding energies and vibrational properties of the C2H2-HF, C2H(CH3)-HF and C2(CH3)2-HF H-bonded complexes. As expected, the more pronounced effects on the structural properties of the isolated molecules due to complexation was verified for the C[triple bond]C and H-F bond lengths, which are directly involved in the H-bond formation. These bond distances increased after complexation. BSSE uncorrected B3LYP binding energies are always lower than the corresponding MP2 values. However, the opposite trend has been verified after BSSE correction by the counterpoise method since it is much lower at B3LYP than at MP2 level. The binding energies for these complexes as well as for the HF acid submolecule modes (the HF stretching and vibrational frequency modes) showed an increasing hydrogen-bonding strength with increasing methyl substitution. The splitting in the HF in-plane and out-of-plane bending modes reflects the anisotropy in the hydrogen-bonding interaction with the pi system of the C[triple bond]C bond. The H-F stretching frequency is shifted downward after complexation and it increases with the methyl substitution. The IR intensities of the HF acid submolecule fundamentals are adequately interpreted through the atomic polar tensor of the hydrogen atom using the charge-charge flux-overlap model. The skeletal stretching modes of the Alkyne submolecule are decreased in the complex. The new vibrational modes arising from complexation show several interesting features.

  4. Algorithms for skiascopy measurement automatization (United States)

    Fomins, Sergejs; Trukša, Renārs; KrūmiĆa, Gunta


    Automatic dynamic infrared retinoscope was developed, which allows to run procedure at a much higher rate. Our system uses a USB image sensor with up to 180 Hz refresh rate equipped with a long focus objective and 850 nm infrared light emitting diode as light source. Two servo motors driven by microprocessor control the rotation of semitransparent mirror and motion of retinoscope chassis. Image of eye pupil reflex is captured via software and analyzed along the horizontal plane. Algorithm for automatic accommodative state analysis is developed based on the intensity changes of the fundus reflex.

  5. Annual review in automatic programming

    CERN Document Server

    Goodman, Richard


    Annual Review in Automatic Programming focuses on the techniques of automatic programming used with digital computers. Topics covered range from the design of machine-independent programming languages to the use of recursive procedures in ALGOL 60. A multi-pass translation scheme for ALGOL 60 is described, along with some commercial source languages. The structure and use of the syntax-directed compiler is also considered.Comprised of 12 chapters, this volume begins with a discussion on the basic ideas involved in the description of a computing process as a program for a computer, expressed in

  6. Automatic mapping of monitoring data

    DEFF Research Database (Denmark)

    Lophaven, Søren; Nielsen, Hans Bruun; Søndergaard, Jacob


    This paper presents an approach, based on universal kriging, for automatic mapping of monitoring data. The performance of the mapping approach is tested on two data-sets containing daily mean gamma dose rates in Germany reported by means of the national automatic monitoring network (IMIS......). In the second dataset an accidental release of radioactivity in the environment was simulated in the South-Western corner of the monitored area. The approach has a tendency to smooth the actual data values, and therefore it underestimates extreme values, as seen in the second dataset. However, it is capable...

  7. Automatic Construction of Finite Algebras

    Institute of Scientific and Technical Information of China (English)



    This paper deals with model generation for equational theories,i.e.,automatically generating (finite)models of a given set of (logical) equations.Our method of finite model generation and a tool for automatic construction of finite algebras is described.Some examples are given to show the applications of our program.We argue that,the combination of model generators and theorem provers enables us to get a better understanding of logical theories.A brief comparison betwween our tool and other similar tools is also presented.

  8. Transatlantic link (United States)

    (left) European Geophysical Society (EGS) President Rolf Meissner at AGU Headquarters with (center) Executive Director Fred Spilhaus and (right) Foreign Secretary Juan Roederer. Meissner attended the meeting of AGU's Committee on International Participation (CIP) on February 26, 1988. At that meeting, specific ways of fostering close links between AGU and EGS were discussed.A few weeks later, Roederer and AGU staff, working with EGS Secretary-General Arne Richter at the EGS meeting in Bologna, Italy, March 21-25, planned details of the establishment of an AGU office in Europe. The Copernicus Gesellschaft, a new entity located on the premises of the Max Planck Institute for Aeronomy in Lindau, Federal Republic of Germany, will provide the administrative staff and handle logistics.

  9. Processing of intentional and automatic number magnitudes in children born prematurely: evidence from fMRI. (United States)

    Klein, Elise; Moeller, Korbinian; Kiechl-Kohlendorfer, Ursula; Kremser, Christian; Starke, Marc; Cohen Kadosh, Roi; Pupp-Peglow, Ulrike; Schocke, Michael; Kaufmann, Liane


    This study examined the neural correlates of intentional and automatic number processing (indexed by number comparison and physical Stroop task, respectively) in 6- and 7-year-old children born prematurely. Behavioral results revealed significant numerical distance and size congruity effects. Imaging results disclosed (1) largely overlapping fronto-parietal activation for intentional and automatic number processing, (2) a frontal to parietal shift of activation upon considering the risk factors gestational age and birth weight, and (3) a task-specific link between math proficiency and functional magnetic resonance imaging (fMRI) signal within distinct regions of the parietal lobes-indicating commonalities but also specificities of intentional and automatic number processing.

  10. Coalescence of silver clusters by immersion in diluted HF solution

    Energy Technology Data Exchange (ETDEWEB)

    Milazzo, R. G.; Mio, A. M.; D’Arrigo, G.; Spinella, C. [CNR-IMM Institute for Microelectronics and Microsystems, I-95121 Catania (Italy); Grimaldi, M. G. [Department of Physics and Astronomy, Università di Catania, I-95123 Catania (Italy); MATIS IMM-CNR, I-95123 Catania (Italy); Rimini, E. [CNR-IMM Institute for Microelectronics and Microsystems, I-95121 Catania (Italy); Department of Physics and Astronomy, Università di Catania, I-95123 Catania (Italy)


    The galvanic displacement deposition of silver on H-terminated Si (100) in the time scale of seconds is instantaneous and characterized by a cluster density of 10{sup 11}-10{sup 12} cm{sup −2}. The amount of deposited Ag follows a t{sup 1/2} dependence in agreement with a Cottrell diffusion limited mechanism. At the same time, during the deposition, the cluster density reduces by a factor 5. This behavior is in contrast with the assumption of immobile clusters. We show in the present work that coalescence and aggregation occur also in the samples immersed in the diluted hydrofluoric acid (HF) solution without the presence of Ag{sup +}. Clusters agglomerate according to a process of dynamic coalescence, typical of colloids, followed by atomic redistribution at the contact regions with the generation of multiple internal twins and stacking-faults. The normalized size distributions in terms of r/r{sub mean} follow also the prediction of the Smoluchowski ripening mechanism. No variation of the cluster density occurs for samples immersed in pure H{sub 2}O solution. The different behavior might be associated to the strong attraction of clusters to oxide-terminated Si surface in presence of water. The silver clusters are instead weakly bound to hydrophobic H-terminated Si in presence of HF. HF causes then the detachment of clusters and a random movement on the silicon surface with mobility of about 10{sup −13} cm{sup 2}/s. Attractive interaction (probably van der Waals) among particles promotes coarsening.

  11. Strong photoluminescence of the porous silicon with HfO2-filled microcavities (United States)

    Jiang, Ran; Wu, Zhengran; Du, Xianghao; Han, Zuyin; Sun, Weideng


    Greatly enhanced blue emission was observed at room temperature in the single-crystal silicon with HfO2 filled into its microcavities. The broad blue band light was emitted from both the HfO2 dielectric and the porous Si. The ferroelectricity of HfO2 enhances the blue emission from Si by its filling into the microcaivities. At the same time, HfO2 contributes to the light emission for the transitions of the defect levels for oxygen vacancy. The observation of greatly enhanced blue light emission of the porous Si filled with HfO2 dielectric is remarkable as both HfO2 and Si are highly compatible with Si-based electronic industry.

  12. Ozone Treatment Improved the Resistive Switching Uniformity of HfAlO2 Based RRAM Devices

    Directory of Open Access Journals (Sweden)

    Lifeng Liu


    Full Text Available HfAlO2 based resistive random access memory (RRAM devices were fabricated using atomic layer deposition by modulating deposition cycles for HfO2 and Al2O3. Effect of ozone treatment on the resistive switching uniformity of HfAlO2 based RRAM devices was investigated. Compared to the as-fabricated devices, the resistive switching uniformity of HfAlO2 based RRAM devices with the ozone treatment is significantly improved. The uniformity improvement of HfAlO2 based RRAM devices is related to changes in compositional and structural properties of the HfAlO2 resistive switching film with the ozone treatment.

  13. Medium-Range Order Structure and Fragility of Superheated Melts of Amorphous CuHf Alloys

    Institute of Scientific and Technical Information of China (English)

    BIAN Xiu-Fang; SUN Bao-An; HU Li-Na


    @@ The structural factors of amorphous CuHf alloys at different temperatures are determined by using a high temperature x-ray diffractometer. It is found that not only the short-range order structure but also the medium-range order structure exists in amorphous CuHf alloys. The dynamic viscosities of CuHf alloy melts are measured by a torsional oscillation viscometer. The fragility of superheated melts of CuHf alloys is calculated based on the viscosity data. The experimental results show that the glass-forming ability of the CuHf alloys is closely related to the fragility of their superheated melt. The relationship between the medium-range order structures and the fragility of superheated melts has also been established in amorphous CuHf alloys. In contrast to the fragility of supercooled liquids, the fragility of superheated liquids promises a better approach to reflecting the dynamics of glass forming liquids.

  14. Ionosphere research with a HF/MF cubesat radio instrument (United States)

    Kallio, Esa; Aikio, Anita; Alho, Markku; Fontell, Mathias; Harri, Ari-Matti; Kauristie, Kirsti; Kestilä, Antti; Koskimaa, Petri; Mäkelä, Jakke; Mäkelä, Miika; Turunen, Esa; Vanhamäki, Heikki; Verronen, Pekka


    New technology provides new possibilities to study geospace and 3D ionosphere by using spacecraft and computer simulations. A type of nanosatellites, CubeSats, provide a cost effective possibility to provide in-situ measurements in the ionosphere. Moreover, combined CubeSat observations with ground-based observations gives a new view on auroras and associated electromagnetic phenomena. Especially joint and active CubeSat - ground based observation campaigns enable the possibility of studying the 3D structure of the ionosphere. Furthermore using several CubeSats to form satellite constellations enables much higher temporal resolution. At the same time, increasing computation capacity has made it possible to perform simulations where properties of the ionosphere, such as propagation of the electromagnetic waves in the medium frequency, MF (0.3-3 MHz) and high frequency, HF (3-30 MHz), ranges is based on a 3D ionospheric model and on first-principles modelling. Electromagnetic waves at those frequencies are strongly affected by ionospheric electrons and, consequently, those frequencies can be used for studying the plasma. On the other hand, even if the ionosphere originally enables long-range telecommunication at MF and HF frequencies, the frequent occurrence of spatiotemporal variations in the ionosphere disturbs communication channels, especially at high latitudes. Therefore, study of the MF and HF waves in the ionosphere has both a strong science and technology interests. We introduce recently developed simulation models as well as measuring principles and techniques to investigate the arctic ionosphere by a polar orbiting CubeSat whose novel AM radio instrument measures HF and MF waves. The cubesat, which contains also a white light aurora camera, is planned to be launched in late 2017 ( The new models are (1) a 3D ray tracing model and (2) a 3D full kinetic electromagnetic simulation. We also introduce how combining of the

  15. HF beacon network for ionospheric specification in Peru (United States)

    Hysell, D. L.; Milla, M. A.; Vierinen, J.


    A growing network of HF beacon transmitters and receivers is being deployed in Peru for specifying the F region ionosphere regionally. The effort is motivated by ionospheric disturbances associated with equatorial spread F (ESF), especially disturbances arising under inauspicious ESF conditions. The beacons use dual frequencies (2.72 and 3.64 MHz). They incorporate PRN coding to afford group-delay measurements. Scatered power, Doppler shift, bearing, and polarization are also measured. An algorithm for inverting the beacon data combined with electron density profiles from Jicamarca is described. Data and representative solutions from recent campaigns will be reviewed.


    Institute of Scientific and Technical Information of China (English)

    Yang Lei; Zhang You'ai


    In this letter, a kind of associated synchronization algorithm which is suitable for HF (High Frequency) broadband OFDM (Orthogonal Frequency Division Multiplexing) system is presented based on describing and constructing the GMW (Gorden, Mills and Welch) sequence. The algorithm is based on the Schmidl and Minn's symbol timing principle, the constructed GMW sequence is transmitted and disposed, and the synchronization is adjudicated using the correlation of GMW sequence. The simulation result indicates that this algorithm has high performance synchronization ability under the low SNR (Signal to Noise Ratio) at two different kinds of channel models.

  17. Meteorite zircon constraints on the bulk Lu-Hf isotope composition and early differentiation of the Earth. (United States)

    Iizuka, Tsuyoshi; Yamaguchi, Takao; Hibiya, Yuki; Amelin, Yuri


    Knowledge of planetary differentiation is crucial for understanding the chemical and thermal evolution of terrestrial planets. The (176)Lu-(176)Hf radioactive decay system has been widely used to constrain the timescales and mechanisms of silicate differentiation on Earth, but the data interpretation requires accurate estimation of Hf isotope evolution of the bulk Earth. Because both Lu and Hf are refractory lithophile elements, the isotope evolution can be potentially extrapolated from the present-day (176)Hf/(177)Hf and (176)Lu/(177)Hf in undifferentiated chondrite meteorites. However, these ratios in chondrites are highly variable due to the metamorphic redistribution of Lu and Hf, making it difficult to ascertain the correct reference values for the bulk Earth. In addition, it has been proposed that chondrites contain excess (176)Hf due to the accelerated decay of (176)Lu resulting from photoexcitation to a short-lived isomer. If so, the paradigm of a chondritic Earth would be invalid for the Lu-Hf system. Herein we report the first, to our knowledge, high-precision Lu-Hf isotope analysis of meteorite crystalline zircon, a mineral that is resistant to metamorphism and has low Lu/Hf. We use the meteorite zircon data to define the Solar System initial (176)Hf/(177)Hf (0.279781 ± 0.000018) and further to identify pristine chondrites that contain no excess (176)Hf and accurately represent the Lu-Hf system of the bulk Earth ((176)Hf/(177)Hf = 0.282793 ± 0.000011; (176)Lu/(177)Hf = 0.0338 ± 0.0001). Our results provide firm evidence that the most primitive Hf in terrestrial zircon reflects the development of a chemically enriched silicate reservoir on Earth as far back as 4.5 billion years ago.

  18. Thermodynamic modeling of the Co–Hf system supported by key experiments and first-principles calculations

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Xingxu [School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083 (China); State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083 (China); Liu, Shuhong, E-mail: [State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083 (China); Sino-German Cooperation Group “Microstructure in Al alloys”, Central South University, Changsha, Hunan 410083 (China); Cheng, Kaiming; Tang, Ying [State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083 (China); Ou, Pengfei [School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083 (China); State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083 (China); Nash, Philip [Thermal Processing Technology Center, Illinois Institute of Technology (IIT), 10 West 32nd Street, Chicago, IL 60616 (United States); Sundman, Bo [INSTN, CEA Saclay, 91191 Gif-Sur-Yvette Cedex (France); Du, Yong [State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083 (China); Sino-German Cooperation Group “Microstructure in Al alloys”, Central South University, Changsha, Hunan 410083 (China); Zheng, Feng [School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083 (China)


    Highlights: • Heat contents of Co{sub 2}Hf and CoHf{sub 2} were measured by drop calorimetry. • Enthalpy of formation for Co{sub 23}Hf{sub 6} was computed via first-principles calculations. • Co–Hf system was assessed by means of CALPHAD approach. • Order–disorder model is used to describe B2 (CoHf) and A2 (βHf). • Glass forming range of the Co–Hf amorphous alloys was predicted. - Abstract: Phase equilibria and thermodynamic properties of the Co–Hf system were investigated via calorimetric measurements, first-principles calculations and thermodynamic modeling. Heat contents of Co{sub 2}Hf and CoHf{sub 2} were measured by drop calorimetry from 300 to 1200 °C. The enthalpy of formation for Co{sub 23}Hf{sub 6} at 0 K was computed via first-principles calculations. Based on the experimental measurements and first-principles calculations from the present work and the literature, the Co–Hf system was assessed by means of CALPHAD (CALculation of PHAse Diagram) approach. The excess Gibbs energy of solution phases was modeled with Redlich–Kister polynomial. Sublattice models were employed to describe the homogeneity ranges of Co{sub 2}Hf, CoHf and CoHf{sub 2}. The order–disorder transition between B2 (CoHf) and A2 (βHf) phases was taken into account in the current optimization. Using the optimized parameters, glass forming range (GFR) of the Co–Hf amorphous alloys was predicted to be 15–75 at.% Hf, which is in satisfactory agreement with the experimental observation.

  19. Description of $^{178}$Hf$^{m2}$ in the constrained relativistic mean field theory

    CERN Document Server

    Wei, Zhang; Shuang-Quan, Zhang


    The properties of the ground state of $^{178}$Hf and the isomeric state $^{178}$Hf$^{m2}$ are studied within the adiabatic and diabatic constrained relativistic mean field (RMF) approaches. The RMF calculations reproduce well the binding energy and the deformation for the ground state of $^{178}$Hf. Using the ground state single-particle eigenvalues obtained in the present calculation, the lowest excitation configuration with $K^\\pi=16^+$ is found to be $\

  20. Assembly of the CMS HF (hadron forward) calorimeter, April 2003 to June 2005

    CERN Multimedia

    Tejinder S. Virdee, CERN


    The forward calorimeters (HF) of the CMS hadron calorimeter system are located 11.2 m from the interaction point. Each HF module is composed by 18 wedges, made of steel absorbers and radiation-hard quartz fibers. The photogallery shows the wedges (Figs. 1-3, April 2003), the assembly of one HF module (Figs. 4-9, May and June 2004) and the assembly of the other (Figs. 10-11, June 2005)

  1. Far-Field Testing Method of Spurious Emission Produced by HF RFID


    Nikola Gvozdenovic; Ralph Prestros; Mecklenbräuker, Christoph F.


    We present measurements of spurious emission produced by high-frequency radio frequency identification (HF RFID) using carrier frequency of 13.56 MHz. HF RFID tags produce unwanted emission due to rectification and more generally due to nonlinearity of analog front end. Depending on the conducting material of an HF RFID coil and surrounding dielectric material, the coil behaves as more or less good antenna on some harmonic frequencies. Exact characterization and analysis of unwanted emission ...

  2. Automatic Validation of Protocol Narration

    DEFF Research Database (Denmark)

    Bodei, Chiara; Buchholtz, Mikael; Degano, Pierpablo;


    We perform a systematic expansion of protocol narrations into terms of a process algebra in order to make precise some of the detailed checks that need to be made in a protocol. We then apply static analysis technology to develop an automatic validation procedure for protocols. Finally, we...

  3. How CBO Estimates Automatic Stabilizers (United States)


    Medicare Payroll Taxes ........................................................................................ 10 Taxes on Production and Imports ...the economy. Most types of revenues—mainly personal, corporate, and social insurance taxes—are sensitive to the business cycle and account for most of...States: Automatic Stabilizers, Discretionary Fiscal Policy Actions, and the Economy, Finance and Economic Discussion Series Paper 2010-43 (Board of

  4. Automatic Identification of Metaphoric Utterances (United States)

    Dunn, Jonathan Edwin


    This dissertation analyzes the problem of metaphor identification in linguistic and computational semantics, considering both manual and automatic approaches. It describes a manual approach to metaphor identification, the Metaphoricity Measurement Procedure (MMP), and compares this approach with other manual approaches. The dissertation then…

  5. Automatic Error Analysis Using Intervals (United States)

    Rothwell, E. J.; Cloud, M. J.


    A technique for automatic error analysis using interval mathematics is introduced. A comparison to standard error propagation methods shows that in cases involving complicated formulas, the interval approach gives comparable error estimates with much less effort. Several examples are considered, and numerical errors are computed using the INTLAB…

  6. Trevi Park: Automatic Parking System


    ECT Team, Purdue


    TreviPark is an underground, multi-story stacking system that holds cars efficiently, thus reducing the cost of each parking space, as a fully automatic parking system intended to maximize space utilization in parking structures. TreviPark costs less than the price of a conventional urban garage and takes up half the volume and 80% of the depth.

  7. Automatic agar tray inoculation device (United States)

    Wilkins, J. R.; Mills, S. M.


    Automatic agar tray inoculation device is simple in design and foolproof in operation. It employs either conventional inoculating loop or cotton swab for uniform inoculation of agar media, and it allows technician to carry on with other activities while tray is being inoculated.

  8. An Automatic Program Synthesis Bibliography. (United States)


    experimentation of the BIS system. Interna- tional Journal of Man-Machine Studies, 17:173-188, 1982. [67] A F Cardenas . Technology for automatic...Philadelphia, PA, May 1978. [110] B L Gates and J A van Hulzen. Proceedings of European Conference on Computer Algebra (EUROCAL 85), pages 583-584. Volume 203

  9. Automatic milking : a better understanding

    NARCIS (Netherlands)

    Meijering, A.; Hogeveen, H.; Koning, de C.J.A.M.


    In 2000 the book Robotic Milking, reflecting the proceedings of an International Symposium which was held in The Netherlands came out. At that time, commercial introduction of automatic milking systems was no longer obstructed by technological inadequacies. Particularly in a few west-European countr

  10. Enhanced resistive switching and multilevel behavior in bilayered HfAlO/HfAlO{sub x} structures for non-volatile memory applications

    Energy Technology Data Exchange (ETDEWEB)

    Faita, F. L., E-mail: [Centre of Physics, University of Minho, Campus de Gualtar, 4710-057 Braga (Portugal); Departamento de Física, Universidade Federal de Santa Catarina, Campus Trindade, 88040-900 Florianópolis, SC (Brazil); Silva, J. P. B., E-mail: [Centre of Physics, University of Minho, Campus de Gualtar, 4710-057 Braga (Portugal); IFIMUP and IN-Institute of Nanoscience and Nanotechnology, Departamento de Física e Astronomia, Faculdade de Ciências da Universidade do Porto, 4169-007 Porto (Portugal); Pereira, M.; Gomes, M. J. M. [Centre of Physics, University of Minho, Campus de Gualtar, 4710-057 Braga (Portugal)


    In this work, hafnium aluminum oxide (HfAlO) thin films were deposited by ion beam sputtering deposition technique on Si substrate. The presence of oxygen vacancies in the HfAlO{sub x} layer deposited in oxygen deficient environment is evidenced from the photoluminescence spectra. Furthermore, HfAlO(oxygen rich)/HfAlO{sub x}(oxygen poor) bilayer structures exhibit multilevel resistive switching (RS), and the switching ratio becomes more prominent with increasing the HfAlO layer thickness. The bilayer structure with HfAlO/HfAlO{sub x} thickness of 30/40 nm displays the enhanced multilevel resistive switching characteristics, where the high resistance state/intermediate resistance state (IRS) and IRS/low resistance state resistance ratios are ≈10{sup 2} and ≈5 × 10{sup 5}, respectively. The switching mechanisms in the bilayer structures were investigated by the temperature dependence of the three resistance states. This study revealed that the multilevel RS is attributed to the coupling of ionic conduction and the metallic conduction, being the first associated to the formation and rupture of conductive filaments related to oxygen vacancies and the second with the formation of a metallic filament. Moreover, the bilayer structures exhibit good endurance and stability in time.

  11. Dancing links

    CERN Document Server

    Knuth, Donald E


    The author presents two tricks to accelerate depth-first search algorithms for a class of combinatorial puzzle problems, such as tiling a tray by a fixed set of polyominoes. The first trick is to implement each assumption of the search with reversible local operations on doubly linked lists. By this trick, every step of the search affects the data incrementally. The second trick is to add a ghost square that represents the identity of each polyomino. Thus puts the rule that each polyomino be used once on the same footing as the rule that each square be covered once. The coding simplifies to a more abstract form which is equivalent to 0-1 integer programming. More significantly for the total computation time, the search can naturally switch between placing a fixed polyomino or covering a fixed square at different stages, according to a combined heuristic. Finally the author reports excellent performance for his algorithm for some familiar puzzles. These include tiling a hexagon by 19 hexiamonds and the N queen...

  12. Ferroelectric phase stabilization of HfO2 by nitrogen doping (United States)

    Xu, Lun; Nishimura, Tomonori; Shibayama, Shigehisa; Yajima, Takeaki; Migita, Shinji; Toriumi, Akira


    We report that nitrogen (N) doping can drive the ferroelectricity of HfO2. It was found that N doping can cause the transition from a monoclinic phase to a highly symmetric phase. The role of N doping is discussed from the viewpoints of charge balance and bond-constraining effects. The former is responsible for the structural transformation from a paraelectric phase to a ferroelectric phase by forming an oxygen vacancy. In addition, Hf-N and N-O bonds with covalent characteristics have strong effects on HfO2 structural and electrical properties, and thus contribute to a marked HfO2 para-/ferroelectric transition.

  13. Efficient noble metal nanocatalysts supported on HfC(001 for O2 dissociation

    Directory of Open Access Journals (Sweden)

    Shiyan Wang


    Full Text Available The adsorption and dissociation of O2 on the M4 (M=Au, Pd, Pt clusters supported on HfC(001 (Hafnium Carbide are investigated using ab initio density functional theory calculations. The geometric and electronic structures are analyzed in detail. It is found that the dissociation barriers of O2 on Au4/HfC(001 (0.26 eV, Pd4/HfC(001 (0.49 eV and Pt4/HfC(001 (0.09 eV are much smaller than those on the clean surfaces of HfC(001 (1.60 eV, Au(111 (1.37 eV, Pd(111 (1.0 and 0.91 eV and Pt(111 (0.27–0.7 eV, respectively. The low dissociation barriers imply that the Pt4/HfC(001 exhibits the highest catalytic activity for O2 dissociation, and the Au4/HfC(001 and Pd4/HfC(001 may also be possible substitutes with lower cost for the current Pt/C catalyst for O2 dissociation. The present study is conductive to designing new efficient noble metal catalyst using HfC support for efficiently promoting O2 dissociation.

  14. Efficient noble metal nanocatalysts supported on HfC(001) for O2 dissociation (United States)

    Wang, Shiyan; Zhang, Xilin; Zhang, Yanxing; Mao, Jianjun; Yang, Zongxian


    The adsorption and dissociation of O2 on the M4 (M=Au, Pd, Pt) clusters supported on HfC(001) (Hafnium Carbide) are investigated using ab initio density functional theory calculations. The geometric and electronic structures are analyzed in detail. It is found that the dissociation barriers of O2 on Au4/HfC(001) (0.26 eV), Pd4/HfC(001) (0.49 eV) and Pt4/HfC(001) (0.09 eV) are much smaller than those on the clean surfaces of HfC(001) (1.60 eV), Au(111) (1.37 eV), Pd(111) (1.0 and 0.91 eV) and Pt(111) (0.27-0.7 eV), respectively. The low dissociation barriers imply that the Pt4/HfC(001) exhibits the highest catalytic activity for O2 dissociation, and the Au4/HfC(001) and Pd4/HfC(001) may also be possible substitutes with lower cost for the current Pt/C catalyst for O2 dissociation. The present study is conductive to designing new efficient noble metal catalyst using HfC support for efficiently promoting O2 dissociation.

  15. Study of Direct-Contact HfO2/Si Interfaces

    Directory of Open Access Journals (Sweden)

    Noriyuki Miyata


    Full Text Available Controlling monolayer Si oxide at the HfO2/Si interface is a challenging issue in scaling the equivalent oxide thickness of HfO2/Si gate stack structures. A concept that the author proposes to control the Si oxide interface by using ultra-high vacuum electron-beam HfO2 deposition is described in this review paper, which enables the so-called direct-contact HfO2/Si structures to be prepared. The electrical characteristics of the HfO2/Si metal-oxide-semiconductor capacitors are reviewed, which suggest a sufficiently low interface state density for the operation of metal-oxide-semiconductor field-effect-transistors (MOSFETs but reveal the formation of an unexpected strong interface dipole. Kelvin probe measurements of the HfO2/Si structures provide obvious evidence for the formation of dipoles at the HfO2/Si interfaces. The author proposes that one-monolayer Si-O bonds at the HfO2/Si interface naturally lead to a large potential difference, mainly due to the large dielectric constant of the HfO2. Dipole scattering is demonstrated to not be a major concern in the channel mobility of MOSFETs.

  16. Structural degradation of thin HfO2 film on Ge during the postdeposition annealing (United States)

    Miyata, Noriyuki; Yasuda, Tetsuji; Abe, Yasuhiro


    Securing the thermal robustness of thin hafnium oxide (HfO2) film on the semiconductor surface is an important technical issue in the fabrication of the metal-oxide-semiconductor field-effect transistor devices, as the HfO2-based high-k gate stacks usually undergo high-temperature processes. In this study, the structural development of thin HfO2 film on a Ge surface during postdeposition annealing in an ultrahigh vacuum was examined to explore the origin for the initial degradation of thin HfO2 film. Void nucleation and subsequent two-dimensional void growth take place at 780-840 °C, while the chemical composition of the remaining Hf oxide is virtually stable. Both the void nucleation and growth processes show similar larger activation energy of about 10 eV. Based on the observed manner of void growth and the estimated activation energies, the authors propose that mass transport on the HfO2 surface is responsible for void nucleation in the HfO2 films on Ge. The authors also compare the present results with the previous studies on HfO2/Si structures, and suggest that similar surface process leads to the local Hf silicidation.

  17. The effect of Cu doping concentration on resistive switching of HfO{sub 2} film

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Tingting; Tan, Tingting, E-mail:; Liu, Zhengtang


    Graphical abstract: - Highlights: • The Cu doped and undoped HfO{sub 2} films were fabricated. • The improved RS behaviors were observed for Cu doped HfO{sub 2} film with BRS. • The 9.7% doped HfO{sub 2}:Cu film showed both BRS and URS behaviors. • The related switching mechanisms were illustrated. - Abstract: The Cu-doped and undoped HfO{sub 2} films were fabricated and the effect of Cu doping concentration on resistive switching (RS) of HfO{sub 2} film was demonstrated. The X-ray photoelectron spectroscopy (XPS) was carried out to investigate the chemical bonding states of Cu in HfO{sub 2}:Cu film. The improved RS behaviors in terms of ON/OFF ratio and switching parameters were observed for Cu-doped HfO{sub 2} film with bipolar resistive switching (BRS) behavior. With the increase of Cu doping concentration, the 9.7% Cu-doped HfO{sub 2} film showed both BRS and unipolar resistive switching (URS) behaviors with large operating voltages. The space charge limited current (SCLC) effect was proposed to interpret the switching mechanism of HfO{sub 2}:Cu films with BRS behavior and the URS behavior can be explained by the migration of Cu ions.

  18. Lu-hf total-rock isochron for the eucrite meteorites (United States)

    Patchett, P.J.; Tatsumoto, M.


    The isotope 176Lu (2.6% of natural lutetium) decays by ??- to 176Hf, with a long half life. We present here the first Lu-Hf isochron. The eucrite meteorites, a suite of planetary igneous rocks of known age, 4,550 Myr, define a 10-point total-rock isochron with a slope of 0.0934 ?? 40, leading to a value of 3.53 ?? 0.14 ??1010yr for the ??--decay half life of 176Lu. The isochron intercept of 0.27973 ?? 12 gives the initial 176Hf/177Hf for the inner Solar System at the time of accretion. ?? 1980 Nature Publishing Group.

  19. Chemical stability and defect formation in CaHfO3

    KAUST Repository

    Alay-E-Abbas, Syed Muhammad


    Defects in CaHfO3 are investigated by ab initio calculations based on density functional theory. Pristine and anion-deficient CaHfO 3 are found to be insulating, whereas cation-deficient CaHfO 3 is hole-doped. The formation energies of neutral and charged cation and anion vacancies are evaluated to determine the stability in different chemical environments. Moreover, the energies of the partial and full Schottky defect reactions are computed. We show that clustering of anion vacancies in the HfO layers is energetically favorable for sufficiently high defect concentrations and results in metallicity. © 2014 EPLA.

  20. Anticooperativity of FHF hydrogen bonds in clusters of the type F- × (HF)n, RF × (HF)n and XF × (HF)n, R = alkyl and X = H, Br, Cl, F (United States)

    Kucherov, S. Yu.; Bureiko, S. F.; Denisov, G. S.


    Properties of twenty five hydrogen-bonded complexes, namely, F- × (HF)n (n = 1-6), RF × (HF)n (R = t-Bu, i-Pr, Et, Me; n = 1-3), XF × (HF)n (X = H, Br, Cl; n = 1-2), and FF…HF with the hydrogen bond energy varying in a wide range have been calculated using ab initio methods at the MP2/6-31++G** level. For the first time, the energies, geometrical parameters and vibrational frequencies are obtained for the series of clusters, where the bonding character changes from covalent to van der Waals on the variation of proton-acceptor ability of the base, and the energies are in the range of 45-1 kcal/mol. The mutual influence of multiple hydrogen bonds of F…HF type in clusters, in which a fluorine anion or an atom participates in hydrogen bond formation as the acceptor, is systematically investigated. The relative changes in the values of the considered parameters on the sequential addition of an HF molecule (anticooperativity) were determined. It was shown that non-additivity of the interaction is most strongly pronounced in the energy and vibrational frequency values, geometrical parameters of hydrogen bonds are less sensitive to the mutual influence. The anticooperative effect is more pronounced on the hydrogen bridge length R(F...F) than on the geometry of proton donor r(HF). The hydrogen bond formation and the increase of the number n of ligands lead to successive lengthening of the r(XF) bond adjacent to the hydrogen bridge. The length of an XF bond changes stronger on formation of each hydrogen bond than the HF bond length.

  1. Effects of Hf Incorporation on Negative Bias-Illumination Stress Stability in Hf-In-Zn-O Thin-Film Transistors (United States)

    Kim, Sangwook; Park, Jae Chul; Kim, Dae Hwan; Lee, Jang-Sik


    In this study, highly reliable amorphous oxide semiconductor-based thin-film transistors (TFTs) were developed. The Hf concentration was systematically changed in the Hf-incorporated In-Zn-O (HIZO) TFTs, and Hf played an important role in determining the negative bias-illumination instability. The process parameters were optimized in order to obtain HIZO TFTs with an excellent stability. HIZO can be processed on a 6-in. wafer at low temperatures and is almost transparent in the visible range. Thus this material is promising for use in current TFTs as well as future transparent electronic device components with good electrical performance and excellent stability.

  2. Phase1 upgrade of the CMS-HF Calorimeter

    CERN Document Server

    Gulmez, Erhan


    In this presentation, results of the Phase I upgrade of the CMS Hadron Forward Calorimeter (HF) are discussed. The CMS-HF Calorimeter was using regular PMTs. Cherenkov light produced in the quartz fibers embedded in the iron absorber was read out with the PMTs. However, occasionally, stray muons hitting the PMT windows cause Cherenkov radiation in the PMT itself and produce large signals. These large signals mimic a very high-energy particle and are tagged as important by the trigger. To reduce this problem, PMTs had to be replaced. The four-anode PMTs that were chosen have thinner windows; thereby reducing the Cherenkov radiation in the PMT window. As part of the upgrade, the read-out electronics is to be replaced so that the PMTs are read out in two channels by connecting each pair of anodes to a single channel. Information provided by these two channels will help us reject the false signals due to the stray muons since the Cherenkov radiation in the PMT window is more likely to produce a signal only in one...

  3. Reversible spin texture in ferroelectric Hf O2 (United States)

    Tao, L. L.; Paudel, Tula R.; Kovalev, Alexey A.; Tsymbal, Evgeny Y.


    Spin-orbit coupling effects occurring in noncentrosymmetric materials are known to be responsible for nontrivial spin configurations and a number of emergent physical phenomena. Ferroelectric materials may be especially interesting in this regard due to reversible spontaneous polarization making possible a nonvolatile electrical control of the spin degrees of freedom. Here, we explore a technologically relevant oxide material, Hf O2 , which has been shown to exhibit robust ferroelectricity in a noncentrosymmetric orthorhombic phase. Using theoretical modelling based on density-functional theory, we investigate the spin-dependent electronic structure of the ferroelectric Hf O2 and demonstrate the appearance of chiral spin textures driven by spin-orbit coupling. We analyze these spin configurations in terms of the Rashba and Dresselhaus effects within the k .p Hamiltonian model and find that the Rashba-type spin texture dominates around the valence-band maximum, while the Dresselhaus-type spin texture prevails around the conduction band minimum. The latter is characterized by a very large Dresselhaus constant λD= 0.578 eV Å, which allows using this material as a tunnel barrier to produce tunneling anomalous and spin Hall effects that are reversible by ferroelectric polarization.

  4. Radiation effects in Zr and Hf containing garnets

    Energy Technology Data Exchange (ETDEWEB)

    Whittle, Karl R. [Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation, PMB1, Menai, NSW 2234 (Australia); Department of Materials Science and Engineering, University of Sheffield, Mappin Street, Sheffield S1 3JD (United Kingdom); Blackford, Mark G.; Smith, Katherine L. [Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation, PMB1, Menai, NSW 2234 (Australia); Zaluzec, Nestor J. [Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439 (United States); Weyland, Matthew [Monash Centre for Electron Microscopy, Monash University, Victoria 3800 (Australia); Department of Materials Engineering, Monash University, Victoria 3800 (Australia); Lumpkin, Gregory R. [Institute of Materials Engineering, Australian Nuclear Science and Technology Organisation, PMB1, Menai, NSW 2234 (Australia)


    Garnets have been considered as host phases for the safe immobilisation of high-level nuclear waste, as they have been shown to accommodate a wide range of elements across three different cation sites, such as Ca, Y, Mn on the a-site, Fe, Al, U, Zr, and Ti on the b-site, and Si, Fe, Al on the c-site. Garnets, due to their ability to have variable composition, make ideal model materials for the examination of radiation damage and recovery in nuclear materials, including as potential waste forms. Kimzeyite, Ca{sub 3}Zr{sub 2}FeAlSiO{sub 12}, has been shown naturally to contain up to 30 wt% Zr, and has previously been examined to elucidate both the structure and ordering within the lattice. This study examines the effects of radiation damage and recovery using in-situ ion beam irradiation with 1 MeV Kr ions at the IVEM-TANDEM facility, Argonne National Laboratory. The complementary Hf containing system Ca{sub 3}Hf{sub 2}FeAlSiO{sub 12} was also examined, and found to have a different response to irradiation damage. A sample of irradiated Ca{sub 3}Zr{sub 2}FeAlSiO{sub 12}, at 1000 K, was characterised using aberration corrected (S)TEM and found to contain discreet, nano-sized, crystalline Fe rich particles, indicating a competing process during recovery is occurring.

  5. Observations of HF backscatter decay rates from HAARP generated FAI (United States)

    Bristow, W. A.; Hysell, D. L.


    Suitable experiments at the High-frequency Active Auroral Research Program (HAARP) facilities in Gakona, Alaska, create a region of ionospheric Field-Aligned Irregularities (FAI) that produces strong radar backscatter observed by the SuperDARN radar on Kodiak Island, Alaska. Creation of FAI in HF ionospheric modification experiments has been studied by a number of authors who have developed a rich theoretical background. The decay of the irregularities, however, has not been so widely studied yet it has the potential for providing estimates of the parameters of natural irregularity diffusion, which are difficult measure by other means. Hysell, et al. [1996] demonstrated using the decay of radar scatter above the Sura heating facility to estimate irregularity diffusion. A large database of radar backscatter from HAARP generated FAI has been collected over the years. Experiments often cycled the heater power on and off in a way that allowed estimates of the FAI decay rate. The database has been examined to extract decay time estimates and diffusion rates over a range of ionospheric conditions. This presentation will summarize the database and the estimated diffusion rates, and will discuss the potential for targeted experiments for aeronomy measurements. Hysell, D. L., M. C. Kelley, Y. M. Yampolski, V. S. Beley, A. V. Koloskov, P. V. Ponomarenko, and O. F. Tyrnov, HF radar observations of decaying artificial field aligned irregularities, J. Geophys. Res. , 101, 26,981, 1996.

  6. Observations of HF backscatter decay rates from HAARP generated FAI (United States)

    Bristow, William; Hysell, David


    Suitable experiments at the High-frequency Active Auroral Research Program (HAARP) facilities in Gakona, Alaska, create a region of ionospheric Field-Aligned Irregularities (FAI) that produces strong radar backscatter observed by the SuperDARN radar on Kodiak Island, Alaska. Creation of FAI in HF ionospheric modification experiments has been studied by a number of authors who have developed a rich theoretical background. The decay of the irregularities, however, has not been so widely studied yet it has the potential for providing estimates of the parameters of natural irregularity diffusion, which are difficult measure by other means. Hysell, et al. [1996] demonstrated using the decay of radar scatter above the Sura heating facility to estimate irregularity diffusion. A large database of radar backscatter from HAARP generated FAI has been collected over the years. Experiments often cycled the heater power on and off in a way that allowed estimates of the FAI decay rate. The database has been examined to extract decay time estimates and diffusion rates over a range of ionospheric conditions. This presentation will summarize the database and the estimated diffusion rates, and will discuss the potential for targeted experiments for aeronomy measurements. Hysell, D. L., M. C. Kelley, Y. M. Yampolski, V. S. Beley, A. V. Koloskov, P. V. Ponomarenko, and O. F. Tyrnov, HF radar observations of decaying artificial field aligned irregularities, J. Geophys. Res. , 101, 26,981, 1996.

  7. Interrogation zone determination in HF RFID systems with multiplexed antennas*

    Directory of Open Access Journals (Sweden)

    Jankowski-Mihułowicz Piotr


    Full Text Available The operation of an anti-collision RFID system is characterized by the interrogation zone which should be estimated in any direction of 3D space for a group of electronic transponders. The interrogation zone should be as large as possible. However, the many problems in this area are due to the fact that energy can be transferred to transponders only on a limited distance. The greatest flexibility in developing RFID applications and shaping the interrogation zone can be achieved using the system with an antenna multiplexer. Therefore the problem of the interrogation zone determination in HF RFID systems with two orthogonal RWD antennas is presented in the paper. The perceived issues have been effectively dealt with and the solution has been proposed on the basis of the elaborated model. Conducted studies have been used to develop the software tool JankoRFIDmuxHF in the Mathcad environment. The research results are analysed in an example system configuration. The specialized measuring stand has been used for experimental verification of the identification efficiency. The convergence of the measurements and calculations confirms a practical usefulness of the presented concept of interrogation zone determination in anti-collision systems. It also shows the practical utility of the developed model and software tools.

  8. On-Line Automatic Visual Inspection Of Internal Surfaces (United States)

    Closier, M. J.; Sood, S. C.


    The Research and Development Department at Peerless Control Systems Limited, at Milton Keynes is developing an Automatic Visual Inspection System for inspecting internal surfaces. The system will automatically inspect and measure useful parameters (ie. longitudinal distances, internal hole diameters, screw threads, pitches, surface, finish quality) and detect defects of types which may be due to machining marks, material defects, and inclusions due to environmental contamination Leg. rust, stains, smears, etc.). The system consists of special customized optics and a dedicated real time computer system with its integral image processing and display system. The final production version will be a customized, dedicated micro processor based system. The customized optics implement optical sensing of imaging data of internal surfaces. The optics are linked to a specialised image converter which is interfaced to a computer system. The software developed at P.C.S. provides the image analysis of the internal surface, thus providing auto-inspection variables, which can be applied to numerous industrial and scientific inspection tasks. The machine will be capable of being used on the production line with an inspection time of a few seconds. Automatic mechanical handling can be incorporated within the above system to save routine handling tasks. This Automatic Inspection System reduces internal surface inspection time, maintains consistent higher quality inspection specifications resulting in a cost time saving, economic utilization of raw materials and increased output.

  9. The role of Upper Hybrid Turbulence on HF Artificial Ionization (United States)

    Papadopoulos, Konstantinos Dennis; Najmi, Amir; Eliasson, Bengt; Milikh, Gennady


    One of the most fascinating and scientifically interesting phenomena of active space experiments is the discovery of artificial ionization by Todd Pedersen when the HAARP ERP reached the GW level. The phenomenon has been well documented experimentally. A theoretical model based on ionization by energetic electrons accelerated by 50-100 V/m localized electric fields due to Strong Langmuir Turbulence (SLT) near the reflection surface of the HF pump wave, reproduced the observed dynamics of the descending plasma layer quite accurately. A major defect of the model was that the electron temperature in the SLT region was a free parameter. When taken as the 2000 K representing the ambient electron temperature the SLT driven electron flux was insufficient to produce ionization. An equivalent electron temperature of 5000 K or higher was necessary to reproduce the observations. The needed electron heating was attributed to the interaction of the HF at the Upper Hybrid (UH) resonant layer, approximately 5 Km below the reflection region where the HF electric field is perpendicular to the ambient magnetic field. The heated electrons expanded upwards along the magnetic field line and interacted with SLT fields near the resonance region. A consequence of this defect was that the theory could not explain the puzzling double resonance effect. Namely the observation that the ionization level was much stronger when the HF frequency and the UH resonance were a multiple of the electron cyclotron frequency. To remedy this we used a series of Vlasov simulations to explore the HF-plasma interaction in the vicinity of the UH resonance. The simulations followed the evolution of the spectral density of the electric field over a 7.5 MHz frequency band and cm scale lengths and of the electron distribution function over one millisecond for both double resonant and non-resonant cases. Many new features were revealed by the analysis of the simulations such as: 1. Broadening of the wave

  10. Electron Microprobe Analysis of Hf in Zircon: Suggestions for Improved Accuracy of a Difficult Measurement (United States)

    Fournelle, J.; Hanchar, J. M.


    It is not commonly recognized as such, but the accurate measurement of Hf in zircon is not a trivial analytical issue. This is important to assess because Hf is often used as an internal standard for trace element analyses of zircon by LA-ICPMS. The issues pertaining to accuracy revolve around: (1) whether the Hf Ma or the La line is used; (2) what accelerating voltage is applied if Zr La is also measured, and (3) what standard for Hf is used. Weidenbach, et al.'s (2004) study of the 91500 zircon demonstrated the spread (in accuracy) of possible EPMA values for six EPMA labs, 2 of which used Hf Ma, 3 used Hf La, and one used Hf Lb, and standards ranged from HfO2, a ZrO2-HfO2 compound, Hf metal, and hafnon. Weidenbach, et al., used the ID-TIMS values as the correct value (0.695 wt.% Hf.), for which not one of the EPMA labs came close to that value (3 were low and 3 were high). Those data suggest: (1) that there is a systematic underestimation error of the 0.695 wt% Hf (ID-TIMS Hf) value if Hf Ma is used; most likely an issue with the matrix correction, as the analytical lines and absorption edges of Zr La, Si Ka and Hf Ma are rather tightly packed in the electromagnetic spectrum. Mass absorption coefficients are easily in error (e.g., Donovan's determination of the MAC of Hf by Si Ka of 5061 differs from the typically used Henke value of 5449 (Donovan et al, 2002); and (2) For utilization of the Hf La line, however, the second order Zr Ka line interferes with Hf La if the accelerating voltage is greater than 17.99 keV. If this higher keV is used and differential mode PHA is applied, only a portion of the interference is removed (e.g., removal of escape peaks), causing an overestimation of Hf content. Unfortunately, it is virtually impossible to apply an interference correction in this case, as it is impossible to locate Hf-free Zr probe standard. We have examined many of the combinations used by those six EPMA labs and concluded that the optimal EPMA is done with Hf

  11. Automatic Control System for Neutron Laboratory Safety

    Institute of Scientific and Technical Information of China (English)

    ZHAO; Xiao; ZHANG; Guo-guang; FENG; Shu-qiang; SU; Dan; YANG; Guo-zhao; ZHANG; Shuai


    In order to cooperate with the experiment of neutron generator,and realize the automatic control in the experiment,a set of automatic control system for the safety of the neutron laboratory is designed.The system block diagram is shown as Fig.1.Automatic control device is for processing switch signal,so PLC is selected as the core component

  12. An Automatic Proof of Euler's Formula

    Directory of Open Access Journals (Sweden)

    Jun Zhang


    Full Text Available In this information age, everything is digitalized. The encoding of functions and the automatic proof of functions are important. This paper will discuss the automatic calculation for Taylor expansion coefficients, as an example, it can be applied to prove Euler's formula automatically.

  13. Self-Compassion and Automatic Thoughts (United States)

    Akin, Ahmet


    The aim of this research is to examine the relationships between self-compassion and automatic thoughts. Participants were 299 university students. In this study, the Self-compassion Scale and the Automatic Thoughts Questionnaire were used. The relationships between self-compassion and automatic thoughts were examined using correlation analysis…

  14. 8 CFR 1205.1 - Automatic revocation. (United States)


    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Automatic revocation. 1205.1 Section 1205.1... REGULATIONS REVOCATION OF APPROVAL OF PETITIONS § 1205.1 Automatic revocation. (a) Reasons for automatic revocation. The approval of a petition or self-petition made under section 204 of the Act and in...

  15. 8 CFR 205.1 - Automatic revocation. (United States)


    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Automatic revocation. 205.1 Section 205.1 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS REVOCATION OF APPROVAL OF PETITIONS § 205.1 Automatic revocation. (a) Reasons for automatic revocation. The approval of a petition...

  16. Atomic scale engineering of HfO{sub 2}-based dielectrics for future DRAM applications

    Energy Technology Data Exchange (ETDEWEB)

    Dudek, Piotr


    Modern dielectrics in combination with appropriate metal electrodes have a great potential to solve many difficulties associated with continuing miniaturization process in the microelectronic industry. One significant branch of microelectronics incorporates dynamic random access memory (DRAM) market. The DRAM devices scaled for over 35 years starting from 4 kb density to several Gb nowadays. The scaling process led to the dielectric material thickness reduction, resulting in higher leakage current density, and as a consequence higher power consumption. As a possible solution for this problem, alternative dielectric materials with improved electrical and material science parameters were intensively studied by many research groups. The higher dielectric constant allows the use of physically thicker layers with high capacitance but strongly reduced leakage current density. This work focused on deposition and characterization of thin insulating layers. The material engineering process was based on Si cleanroom compatible HfO{sub 2} thin films deposited on TiN metal electrodes. A combined materials science and dielectric characterization study showed that Ba-added HfO{sub 2} (BaHfO{sub 3}) films and Ti-added BaHfO{sub 3} (BaHf{sub 0.5}Ti{sub 0.5}O{sub 3}) layers are promising candidates for future generation of state-of-the-art DRAMs. In especial a strong increase of the dielectric permittivity k was achieved for thin films of cubic BaHfO{sub 3} (k{proportional_to}38) and BaHf{sub 0.5}Ti{sub 0.5}O{sub 3} (k{proportional_to}90) with respect to monoclinic HfO{sub 2} (k{proportional_to}19). Meanwhile the CET values scaled down to 1 nm for BaHfO{sub 3} and {proportional_to}0.8 nm for BaHf{sub 0.5}Ti{sub 0.5}O{sub 3} with respect to HfO{sub 2} (CET=1.5 nm). The Hf{sup 4+} ions substitution in BaHfO{sub 3} by Ti{sup 4+} ions led to a significant decrease of thermal budget from 900 C for BaHfO{sub 3} to 700 C for BaHf{sub 0.5}Ti{sub 0.5}O{sub 3}. Future studies need to focus

  17. Evolution of continental crust and mantle heterogeneity: Evidence from Hf isotopes (United States)

    Jonathan, Patchett P.; Kouvo, O.; Hedge, C.E.; Tatsumoto, M.


    We present initial 176Hf/177 Hf ratios for many samples of continental crust 3.7-0.3 Gy old. Results are based chiefly on zircons (1% Hf) and whole rocks: zircons are shown to be reliable carriers of essentially the initial Hf itself when properly chosen on the basis of U-Pb studies. Pre-3.0 Gy gneisses were apparently derived from an unfractionated mantle, but both depleted and undepleted mantle are evident as magma sources from 2.9 Gy to present. This mantle was sampled mainly from major crustal growth episodes 2.8, 1.8 and 0.7 Gy ago, all of which show gross heterogeneity of 176Hf/177Hf in magma sources from ??Hf=0 to +14, or about 60% of the variability of the present mantle. The approximate ??Hf=2??Nd relationship in ancient and modern igneous rocks shows that 176Lu/177Hf fractionates in general twice as much as 147Sm/144Nd in mantle melting processes. This allows an estimation of the relative value of the unknown bulk solid/liquid distribution coefficient for Hf. DLu/DHf=??? 2.3 holds for most mantle source regions. For garnet to be an important residual mantle phase, it must hold Hf strongly in order to preserve Hf-Nd isotopic relationships. The ancient Hf initials are consistent with only a small proportion of recycled older cratons in new continental crust, and with quasi-continuous, episodic growth of the continental crust with time. However, recycling of crust less than 150 My old cannot realistically be detected using Hf initials. The mantle shows clearly the general positive ??Hf resulting from a residual geochemical state at least back to 2.9 Gy ago, and seems to have repeatedly possessed a similar degree of heterogeneity, rather than a continuously-developing depletion. This is consistent with a complex dynamic disequilibrium model for the creation, maintenance and destruction of heterogeneity in the mantle. ?? 1981 Springer-Verlag.

  18. What Hf isotopes in zircon tell us about crust-mantle evolution (United States)

    Iizuka, Tsuyoshi; Yamaguchi, Takao; Itano, Keita; Hibiya, Yuki; Suzuki, Kazue


    The 176Lu-176Hf radioactive decay system has been widely used to study planetary crust-mantle differentiation. Of considerable utility in this regard is zircon, a resistant mineral that can be precisely dated by the U-Pb chronometer and record its initial Hf isotope composition due to having low Lu/Hf. Here we review zircon U-Pb age and Hf isotopic data mainly obtained over the last two decades and discuss their contributions to our current understanding of crust-mantle evolution, with emphasis on the Lu-Hf isotope composition of the bulk silicate Earth (BSE), early differentiation of the silicate Earth, and the evolution of the continental crust over geologic history. Meteorite zircon encapsulates the most primitive Hf isotope composition of our solar system, which was used to identify chondritic meteorites best representative of the BSE (176Hf/177Hf = 0.282793 ± 0.000011; 176Lu/177Hf = 0.0338 ± 0.0001). Hadean-Eoarchean detrital zircons yield highly unradiogenic Hf isotope compositions relative to the BSE, providing evidence for the development of a geochemically enriched silicate reservoir as early as 4.5 Ga. By combining the Hf and O isotope systematics, we propose that the early enriched silicate reservoir has resided at depth within the Earth rather than near the surface and may represent a fractionated residuum of a magma ocean underlying the proto-crust, like urKREEP beneath the anorthositic crust on the Moon. Detrital zircons from world major rivers potentially provide the most robust Hf isotope record of the preserved granitoid crust on a continental scale, whereas mafic rocks with various emplacement ages offer an opportunity to trace the Hf isotope evolution of juvenile continental crust (from εHf[4.5 Ga] = 0 to εHf[present] = + 13). The river zircon data as compared to the juvenile crust composition highlight that the supercontinent cycle has controlled the evolution of the continental crust by regulating the rates of crustal generation and intra

  19. Influence of Hf contents on interface state properties in a-HfInZnO thin-film transistors with SiNx/SiOx gate dielectrics (United States)

    Choi, Hyun-Sik; Jeon, Sanghun; Kim, Hojung; Shin, Jaikwang; Kim, Changjung; Chung, U.-In


    We evaluated the interface properties of amorphous hafnium-indium-zinc-oxide (a-HIZO) thin-film transistors (TFTs) with respect to various Hf contents. To this end, the subthreshold swing and the low-frequency noise (LFN) of the a-HIZO TFTs were measured and compared. From LFNs providing more accurate information, we quantitatively analyzed the interface trap densities and found that they decrease with increasing Hf contents. Although the acceptor-like tail state densities in bulk channel increase with Hf contents, higher Hf contents show lower threshold voltage shift under bias stress, implying that reliability characteristics of a-HIZO TFTs are more sensitive to interface quality rather than bulk property.

  20. Automatic spikes detection in seismogram

    Institute of Scientific and Technical Information of China (English)

    王海军; 靳平; 刘贵忠


    @@ Data processing for seismic network is very complex and fussy, because a lot of data is recorded in seismic network every day, which make it impossible to process these data all by manual work. Therefore, seismic data should be processed automatically to produce a initial results about events detection and location. Afterwards, these results are reviewed and modified by analyst. In automatic processing data quality checking is important. There are three main problem data thatexist in real seismic records, which include: spike, repeated data and dropouts. Spike is defined as isolated large amplitude point; the other two problem datahave the same features that amplitude of sample points are uniform in a interval. In data quality checking, the first step is to detect and statistic problem data in a data segment, if percent of problem data exceed a threshold, then the whole data segment is masked and not be processed in the later process.

  1. Automatic Schema Evolution in Root

    Institute of Scientific and Technical Information of China (English)

    ReneBrun; FonsRademakers


    ROOT version 3(spring 2001) supports automatic class schema evolution.In addition this version also produces files that are self-describing.This is achieved by storing in each file a record with the description of all the persistent classes in the file.Being self-describing guarantees that a file can always be read later,its structure browsed and objects inspected.also when the library with the compiled code of these classes is missing The schema evolution mechanism supports the frequent case when multiple data sets generated with many different class versions must be analyzed in the same session.ROOT supports the automatic generation of C++ code describing the data objects in a file.

  2. Physics of Automatic Target Recognition

    CERN Document Server

    Sadjadi, Firooz


    Physics of Automatic Target Recognition addresses the fundamental physical bases of sensing, and information extraction in the state-of-the art automatic target recognition field. It explores both passive and active multispectral sensing, polarimetric diversity, complex signature exploitation, sensor and processing adaptation, transformation of electromagnetic and acoustic waves in their interactions with targets, background clutter, transmission media, and sensing elements. The general inverse scattering, and advanced signal processing techniques and scientific evaluation methodologies being used in this multi disciplinary field will be part of this exposition. The issues of modeling of target signatures in various spectral modalities, LADAR, IR, SAR, high resolution radar, acoustic, seismic, visible, hyperspectral, in diverse geometric aspects will be addressed. The methods for signal processing and classification will cover concepts such as sensor adaptive and artificial neural networks, time reversal filt...

  3. Automatic design of magazine covers (United States)

    Jahanian, Ali; Liu, Jerry; Tretter, Daniel R.; Lin, Qian; Damera-Venkata, Niranjan; O'Brien-Strain, Eamonn; Lee, Seungyon; Fan, Jian; Allebach, Jan P.


    In this paper, we propose a system for automatic design of magazine covers that quantifies a number of concepts from art and aesthetics. Our solution to automatic design of this type of media has been shaped by input from professional designers, magazine art directors and editorial boards, and journalists. Consequently, a number of principles in design and rules in designing magazine covers are delineated. Several techniques are derived and employed in order to quantify and implement these principles and rules in the format of a software framework. At this stage, our framework divides the task of design into three main modules: layout of magazine cover elements, choice of color for masthead and cover lines, and typography of cover lines. Feedback from professional designers on our designs suggests that our results are congruent with their intuition.

  4. Distribution of p-process 174Hf in early solar system materials and the origin of nucleosynthetic Hf and W isotope anomalies in Ca-Al rich inclusions (United States)

    Peters, Stefan T. M.; Münker, Carsten; Pfeifer, Markus; Elfers, Bo-Magnus; Sprung, Peter


    Some nuclides that were produced in supernovae are heterogeneously distributed between different meteoritic materials. In some cases these heterogeneities have been interpreted as the result of interaction between ejecta from a nearby supernova and the nascent solar system. Particularly in the case of the oldest objects that formed in the solar system - Ca-Al rich inclusions (CAIs) - this view is confirm the hypothesis that a nearby supernova event facilitated or even triggered solar system formation. We present Hf isotope data for bulk meteorites, terrestrial materials and CAIs, for the first time including the low-abundance isotope 174Hf (∼0.16%). This rare isotope was likely produced during explosive O/Ne shell burning in massive stars (i.e., the classical "p-process"), and therefore its abundance potentially provides a sensitive tracer for putative heterogeneities within the solar system that were introduced by supernova ejecta. For CAIs and one LL chondrite, also complementary W isotope data are reported for the same sample cuts. Once corrected for small neutron capture effects, different chondrite groups, eucrites, a silicate inclusion of a IAB iron meteorite, and terrestrial materials display homogeneous Hf isotope compositions including 174Hf. Hafnium-174 was thus uniformly distributed in the inner solar system when planetesimals formed at the system composition, and also variable r-process (or s-process) Hf and W contributions. Based on combined Hf and W isotope compositions, we show that CAIs sampled at least one component in which the proportion of r- and s-process derived Hf and W deviates from that of supernova ejecta. The Hf and W isotope anomalies in CAIs are therefore best explained by selective processing of presolar carrier phases prior to CAI formation, and not by a late injection of supernova materials. Likewise, other isotope anomalies in additional elements in CAIs relative to the bulk solar system may reflect the same process. The isotopic

  5. The Automatic Galaxy Collision Software

    CERN Document Server

    Smith, Beverly J; Pfeiffer, Phillip; Perkins, Sam; Barkanic, Jason; Fritts, Steve; Southerland, Derek; Manchikalapudi, Dinikar; Baker, Matt; Luckey, John; Franklin, Coral; Moffett, Amanda; Struck, Curtis


    The key to understanding the physical processes that occur during galaxy interactions is dynamical modeling, and especially the detailed matching of numerical models to specific systems. To make modeling interacting galaxies more efficient, we have constructed the `Automatic Galaxy Collision' (AGC) code, which requires less human intervention in finding good matches to data. We present some preliminary results from this code for the well-studied system Arp 284 (NGC 7714/5), and address questions of uniqueness of solutions.

  6. Automatic computation of transfer functions (United States)

    Atcitty, Stanley; Watson, Luke Dale


    Technologies pertaining to the automatic computation of transfer functions for a physical system are described herein. The physical system is one of an electrical system, a mechanical system, an electromechanical system, an electrochemical system, or an electromagnetic system. A netlist in the form of a matrix comprises data that is indicative of elements in the physical system, values for the elements in the physical system, and structure of the physical system. Transfer functions for the physical system are computed based upon the netlist.

  7. Annual review in automatic programming

    CERN Document Server

    Halpern, Mark I; Bolliet, Louis


    Computer Science and Technology and their Application is an eight-chapter book that first presents a tutorial on database organization. Subsequent chapters describe the general concepts of Simula 67 programming language; incremental compilation and conversational interpretation; dynamic syntax; the ALGOL 68. Other chapters discuss the general purpose conversational system for graphical programming and automatic theorem proving based on resolution. A survey of extensible programming language is also shown.

  8. Automatic Detection of Fake News


    Pérez-Rosas, Verónica; Kleinberg, Bennett; Lefevre, Alexandra; Mihalcea, Rada


    The proliferation of misleading information in everyday access media outlets such as social media feeds, news blogs, and online newspapers have made it challenging to identify trustworthy news sources, thus increasing the need for computational tools able to provide insights into the reliability of online content. In this paper, we focus on the automatic identification of fake content in online news. Our contribution is twofold. First, we introduce two novel datasets for the task of fake news...

  9. The Automatic Measurement of Targets

    DEFF Research Database (Denmark)

    Höhle, Joachim


    The automatic measurement of targets is demonstrated by means of a theoretical example and by an interactive measuring program for real imagery from a réseau camera. The used strategy is a combination of two methods: the maximum correlation coefficient and the correlation in the subpixel range. F...... interactive software is also part of a computer-assisted learning program on digital photogrammetry....

  10. Automatically-Programed Machine Tools (United States)

    Purves, L.; Clerman, N.


    Software produces cutter location files for numerically-controlled machine tools. APT, acronym for Automatically Programed Tools, is among most widely used software systems for computerized machine tools. APT developed for explicit purpose of providing effective software system for programing NC machine tools. APT system includes specification of APT programing language and language processor, which executes APT statements and generates NC machine-tool motions specified by APT statements.

  11. Automatically-Programed Machine Tools (United States)

    Purves, L.; Clerman, N.


    Software produces cutter location files for numerically-controlled machine tools. APT, acronym for Automatically Programed Tools, is among most widely used software systems for computerized machine tools. APT developed for explicit purpose of providing effective software system for programing NC machine tools. APT system includes specification of APT programing language and language processor, which executes APT statements and generates NC machine-tool motions specified by APT statements.

  12. Automatic translation among spoken languages (United States)

    Walter, Sharon M.; Costigan, Kelly


    The Machine Aided Voice Translation (MAVT) system was developed in response to the shortage of experienced military field interrogators with both foreign language proficiency and interrogation skills. Combining speech recognition, machine translation, and speech generation technologies, the MAVT accepts an interrogator's spoken English question and translates it into spoken Spanish. The spoken Spanish response of the potential informant can then be translated into spoken English. Potential military and civilian applications for automatic spoken language translation technology are discussed in this paper.

  13. The Mark II Automatic Diflux

    Directory of Open Access Journals (Sweden)

    Jean L Rasson


    Full Text Available We report here on the new realization of an automatic fluxgate theodolite able to perform unattended absolute geomagnetic declination and inclination measurements: the AUTODIF MKII. The main changes of this version compared with the former one are presented as well as the better specifications we expect now. We also explain the absolute orientation procedure by means of a laser beam and a corner cube and the method for leveling the fluxgate sensor, which is different from a conventional DIflux theodolite.

  14. Air sensitivity of MoS2, MoSe2, MoTe2, HfS2, and HfSe2 (United States)

    Mirabelli, Gioele; McGeough, Conor; Schmidt, Michael; McCarthy, Eoin K.; Monaghan, Scott; Povey, Ian M.; McCarthy, Melissa; Gity, Farzan; Nagle, Roger; Hughes, Greg; Cafolla, Attilio; Hurley, Paul K.; Duffy, Ray


    A surface sensitivity study was performed on different transition-metal dichalcogenides (TMDs) under ambient conditions in order to understand which material is the most suitable for future device applications. Initially, Atomic Force Microscopy and Scanning Electron Microscopy studies were carried out over a period of 27 days on mechanically exfoliated flakes of 5 different TMDs, namely, MoS2, MoSe2, MoTe2, HfS2, and HfSe2. The most reactive were MoTe2 and HfSe2. HfSe2, in particular, showed surface protrusions after ambient exposure, reaching a height and width of approximately 60 nm after a single day. This study was later supplemented by Transmission Electron Microscopy (TEM) cross-sectional analysis, which showed hemispherical-shaped surface blisters that are amorphous in nature, approximately 180-240 nm tall and 420-540 nm wide, after 5 months of air exposure, as well as surface deformation in regions between these structures, related to surface oxidation. An X-ray photoelectron spectroscopy study of atmosphere exposed HfSe2 was conducted over various time scales, which indicated that the Hf undergoes a preferential reaction with oxygen as compared to the Se. Energy-Dispersive X-Ray Spectroscopy showed that the blisters are Se-rich; thus, it is theorised that HfO2 forms when the HfSe2 reacts in ambient, which in turn causes the Se atoms to be aggregated at the surface in the form of blisters. Overall, it is evident that air contact drastically affects the structural properties of TMD materials. This issue poses one of the biggest challenges for future TMD-based devices and technologies.

  15. Sex-linked dominant (United States)

    Inheritance - sex-linked dominant; Genetics - sex-linked dominant; X-linked dominant; Y-linked dominant ... can be either an autosomal chromosome or a sex chromosome. It also depends on whether the trait ...

  16. Automatic tracking sensor camera system (United States)

    Tsuda, Takao; Kato, Daiichiro; Ishikawa, Akio; Inoue, Seiki


    We are developing a sensor camera system for automatically tracking and determining the positions of subjects moving in three-dimensions. The system is intended to operate even within areas as large as soccer fields. The system measures the 3D coordinates of the object while driving the pan and tilt movements of camera heads, and the degree of zoom of the lenses. Its principal feature is that it automatically zooms in as the object moves farther away and out as the object moves closer. This maintains the area of the object as a fixed position of the image. This feature makes stable detection by the image processing possible. We are planning to use the system to detect the position of a soccer ball during a soccer game. In this paper, we describe the configuration of the developing automatic tracking sensor camera system. We then give an analysis of the movements of the ball within images of games, the results of experiments on method of image processing used to detect the ball, and the results of other experiments to verify the accuracy of an experimental system. These results show that the system is sufficiently accurate in terms of obtaining positions in three-dimensions.

  17. On isoelectronic fluorides [H 3tren]ṡ(AlF 6)ṡH 2O, [H 3tren]ṡ(AlF 6)ṡHF, [H 4tren]ṡ(AlF 6)ṡ(F) and the iron analogue [H 4tren]ṡ(FeF 6)ṡ(F) (United States)

    Adil, K.; Ben Ali, A.; Leblanc, M.; Maisonneuve, V.


    [H 3tren]ṡ(AlF 6)ṡH 2O, [H 3tren]ṡ(AlF 6)ṡHF and [H 4tren]ṡ( MF 6)ṡ(F) ( M=Al, Fe), are obtained by hydrothermal technique and microwave heating in the (Al(OH) 3,FeF 3)- tren-(HF/H 2O)-ethanol system. Structure determinations are performed from single crystal X-ray diffraction data. All phases are built up from ( MF 6) 3- anions linked by hydrogen bonds to [H 3tren] 3+ or [H 4tren] 4+ cations and to water or HF molecules or "isolated" fluoride anions. [H 3tren] 3+ and [H 4tren] 4+ cations adopt a "spider" shape configuration. Surprisingly, the HF molecule is strongly hydrogen bonded with one fluoride ion of the AlF 6 octahedron (d=2.38 Å) in [H 3tren]ṡ(AlF 6)ṡHF while "isolated" fluoride ion is weakly coordinated by three hydrogen atoms in [H 4tren]ṡ( MF 6)ṡ(F). The evolution of the formulations, from [H 3tren]ṡ(AlF 6)ṡH 2O to [H 3tren]ṡ(AlF 6)ṡHF and to [H 4tren]ṡ( MF 6)ṡ(F) ( M=Al, Fe), is linked with the increase of the HF content of the starting solution. The volumes per formula unit decrease from 321.3(1) Å 3 and 320.6(1) Å 3 in [H 3tren]ṡ(AlF 6)ṡH 2O and [H 3tren]ṡ(AlF 6)ṡHF, respectively, to 298.5(4) Å 3 in [H 4tren]ṡ(AlF 6)ṡ(F).

  18. EURObservational Research Programme : The Heart Failure Pilot Survey (ESC-HF Pilot)

    NARCIS (Netherlands)

    Maggioni, Aldo P.; Dahlstrom, Ulf; Filippatos, Gerasimos; Chioncel, Ovidiu; Crespo Leiro, Marisa; Drozdz, Jaroslaw; Fruhwald, Friedrich; Gullestad, Lars; Logeart, Damien; Metra, Marco; Parissis, John; Persson, Hans; Ponikowski, Piotr; Rauchhaus, Mathias; Voors, Adriaan A.; Nielsen, Olav Wendelboe; Zannad, Faiez; Tavazzi, Luigi


    The primary objective of the new ESC-HF Pilot Survey was to describe the clinical epidemiology of outpatients and inpatients with heart failure (HF) and the diagnostic/therapeutic processes applied across 12 participating European countries. This pilot study was specifically aimed at validating the

  19. EURObservational Research Programme: the Heart Failure Pilot Survey (ESC-HF Pilot)

    DEFF Research Database (Denmark)

    Maggioni, Aldo P; Dahlström, Ulf; Filippatos, Gerasimos;


    The primary objective of the new ESC-HF Pilot Survey was to describe the clinical epidemiology of outpatients and inpatients with heart failure (HF) and the diagnostic/therapeutic processes applied across 12 participating European countries. This pilot study was specifically aimed at validating...... the structure, performance, and quality of the data set, for continuing the survey into a permanent registry....

  20. Effects of sol aging on resistive switching behaviors of HfO{sub x} resistive memories

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, Chih-Chieh, E-mail: [Graduate School of Engineering Science and Technology, National Yunlin University of Science and Technology, Douliu 64002, Taiwan, ROC (China); Department of Electronic Engineering, National Yunlin University of Science and Technology, Douliu 64002, Taiwan, ROC (China); Graduate School of Electronic Engineering, National Yunlin University of Science and Technology, Douliu 64002, Taiwan, ROC (China); Sun, Jhen-Kai; Tsao, Che-Chang; Chen, Yu-Ting [Graduate School of Electronic Engineering, National Yunlin University of Science and Technology, Douliu 64002, Taiwan, ROC (China)


    This work investigates effects of long-term sol-aging time on sol-gel HfO{sub x} resistive random access memories (RRAMs). A nontoxic solvent of ethanol is used to replace toxic 2-methoxyethanol, which is usually used in sol-gel processes. The top electrodes are fabricated by pressing indium balls onto the HfO{sub x} surface rather than by using conventional sputtering or evaporation processes. The maximum process temperature is limited to be 100 ℃. Therefore, influences of plasma and high temperature on HfO{sub x} film can be avoided. Under this circumstance, effects of sol aging time on the HfO{sub x} films can be more clearly studied. The current conduction mechanisms in low and high electric regions of the HfO{sub x} RRAM are found to be dominated by Ohmic conduction and trap-filled space charge limited conduction (TF-SCLC), respectively. When the sol aging time increases, the resistive switching characteristic of the HfO{sub x} layer becomes unstable and the transition voltage from Ohmic conduction to TF-SCLC is also increased. This suggests that an exceedingly long aging time will give a HfO{sub x} film with more defect states. The XPS results are consistent with FTIR analysis and they can further explain the unstable HfO{sub x} resistive switching characteristic induced by sol aging.

  1. The effects of composition on mechanical properties of W-4Re-Hf-C alloys (United States)

    Witzke, W. R.


    Studies were made of the effects of alloy composition on the mechanical behavior of as-worked W-4Re-Hf-C alloys containing up to about 0.8 mol % Hfc. Extracted second-phase particles were analyzed and related to alloy composition and creep strength. While strengthening is attributed to HfC particles, the presence of excess hafnium or carbon (above the calculated amounts for stoichiometric HfC) in swaged W-4Re-Hf-C alloys generally causes a reduction of the high-temperature (1930 C) tensile strength; maximum creep strength is, however, indicated for alloys with a slight (about 0.05 to 0.1 at. %) excess of hafnium. Particle strengthening is reduced by WC in solid solution with HfC for allow compositions with an excess of carbon. The low-temperature ductility of worked W-4Re-Hf-C alloys appears to be far more dependent on the amount of excess C or Hf present than on the HfC particle content in the range studies.

  2. First results on the sorption behaviour of Rutherfordium from HCl/HF containing aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Schumann, D.; Nitsche, H. [Technische Univ. Dresden (Germany); Taut, S. [Forschungszentrum Rossendorf e.V. (FZR), Dresden (Germany); Jost, D.T.; Gaeggeler, H.W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Yakushev, A.B.; Buklanov, G.V.; Domanov, V.P.; Lien Din Thi [Joint Inst. for Nuclear Research, Dubna (Russian Federation); Kubica, B.; Misiak, R.; Szeglowski, Z. [NINP Cracow (Poland)


    Rutherfordium shows strong sorption on the cation exchanger DOWEX 50x8 at a concentration of 0.1 M HCl/10{sup -2} M HF. This shows that Rf behaves under these conditions differently from Hf and Zr and more like Th under these conditions. (author) 1 fig., 5 refs.

  3. Effects of sol aging on resistive switching behaviors of HfOx resistive memories (United States)

    Hsu, Chih-Chieh; Sun, Jhen-Kai; Tsao, Che-Chang; Chen, Yu-Ting


    This work investigates effects of long-term sol-aging time on sol-gel HfOx resistive random access memories (RRAMs). A nontoxic solvent of ethanol is used to replace toxic 2-methoxyethanol, which is usually used in sol-gel processes. The top electrodes are fabricated by pressing indium balls onto the HfOx surface rather than by using conventional sputtering or evaporation processes. The maximum process temperature is limited to be 100 ℃. Therefore, influences of plasma and high temperature on HfOx film can be avoided. Under this circumstance, effects of sol aging time on the HfOx films can be more clearly studied. The current conduction mechanisms in low and high electric regions of the HfOx RRAM are found to be dominated by Ohmic conduction and trap-filled space charge limited conduction (TF-SCLC), respectively. When the sol aging time increases, the resistive switching characteristic of the HfOx layer becomes unstable and the transition voltage from Ohmic conduction to TF-SCLC is also increased. This suggests that an exceedingly long aging time will give a HfOx film with more defect states. The XPS results are consistent with FTIR analysis and they can further explain the unstable HfOx resistive switching characteristic induced by sol aging.

  4. The Modulation of Ionospheric Alfven Resonator on Heating HF Waves and the Doppler Effect

    Institute of Scientific and Technical Information of China (English)

    NiBin-bin; ZhaoZheng-yu; XieShu-guo


    The propagation of HF waves in IAR can produce many nonlinear effects, including the modulation effect of IAR on HF waves and the Doppler effect. To start with the dependence of the ionospheric electron temperature varia-tions on the Alfven resonant field, We discuss the mechanism of the modulation effect and lucubrate possible reasons for the Doppler effect. The results show that the Alfven resonant field can have an observable modulation effect on HF waves while its mechanism is quite different from that of Schumann resonant field on HF waves. The depth of modulation of IAR on HF waves has a quasi-quadratic relation with the Alfven field, which directly inspires the formation of cross-spectrum between ULF waves and HF waves and results in spectral peaks at some gyro-frequencies of IAR. With respect to the Doppler effect during the propagation of HF waves in IAR, it is mainly caused by the motion of the high-speed flyer and the drifting electrons and the frequency shift from the phase vari-ation of the reflected waves can be neglected when the frequency of HF incident wave is high enough.

  5. The first HF table, after heat treatment and ready to be machined in HEPCO, Arak (IRAN)

    CERN Multimedia

    Tiziano Camporesi


    The first HF support table 'load' tested by the team of people who have contributed to it from design to welding. This table will support the 240 tons of 1 HF detector and will integrate the raisers which will push it up to the beam line level. It is the first Iranian contribution to an HEP experiment.

  6. 47 CFR 73.758 - System specifications for digitally modulated emissions in the HF broadcasting service. (United States)


    ... emissions in the HF broadcasting service. 73.758 Section 73.758 Telecommunication FEDERAL COMMUNICATIONS... § 73.758 System specifications for digitally modulated emissions in the HF broadcasting service. (a... digital audio broadcasting and datacasting are authorized. The RF requirements for the DRM system...

  7. Computed tomographic coronary angiography for patients with heart failure (CTA-HF): a randomized controlled trial (IMAGE HF Project 1-C). (United States)

    Chow, Benjamin J W; Green, Rachel E; Coyle, Doug; Laine, Mika; Hanninen, Helena; Leskinen, Hanna; Rajda, Miroslav; Larose, Eric; Hartikainen, Juha; Hedman, Marja; Mielniczuk, Lisa; O'Meara, Eileen; deKemp, Robert A; Klein, Ran; Paterson, Ian; White, James A; Yla-Herttuala, Seppo; Leber, Alex; Tandon, Vikas; Lee, Ting; Al-Hesayen, Abdul; Hessian, Renee; Dowsley, Taylor; Kass, Malek; Kelly, Cathy; Garrard, Linda; Tardif, Jean-Claude; Knuuti, Juhani; Beanlands, Rob S; Wells, George A


    The prevalence of heart failure (HF) is rising in industrialized and developing countries. Though invasive coronary angiography (ICA) remains the gold standard for anatomical assessment of coronary artery disease in HF patients, alternatives are being sought. Computed tomographic coronary angiography (CTA) has emerged as an accurate non-invasive diagnostic tool for coronary artery disease (CAD) and has been demonstrated to have prognostic value. Whether or not CTA can be used in HF patients is unknown. Acknowledging the aging population, the growing prevalence of HF and the increasing financial burden of healthcare, we need to identify non-invasive diagnostic tests that are available, safe, accurate and cost-effective. The proposed study aims to provide insight into the efficacy of CTA in HF patients. A multicenter randomized controlled trial will enroll 250 HF patients requiring coronary anatomical definition. Enrolled patients will be randomized to either CTA or ICA (n = 125 per group) as the first test to define coronary anatomy. The primary outcomes will be collected to determine downstream resource utilization. Secondary outcomes will include the composite clinical events and major adverse cardiac events. In addition, the accuracy of CTA for detecting coronary anatomy and obstruction will be assessed in patients who subsequently undergo both CTA and ICA. It is expected that CTA will be a more cost-effective strategy for diagnosis: yielding similar outcomes with fewer procedural risks and improved resource utilization., NCT01283659. Team grant #CIF 99470.

  8. Signal processing technique for randomly discontinuous spectra HF radar waveforms

    Institute of Scientific and Technical Information of China (English)

    张东坡; 刘兴钊


    A major problem with all high frequency (HF) radars is a relatively poor range resolution available due to many interference sources. To avoid the interferences in frequency domain and operate with wideband, the randomly discontinuous spectra (RDS) signal is employed. However, it results in high range sidelobes when matching the reflected echo, which is much more difficult for target detection. A new signal processing technique that is radically different from the conventional technique to lower range sidelobes is introduced. This method is based on suppressing the selfclutter of the radar range ambiguity function (AF) by mismatched filtering. An effective algorithm is adopted to solve the filter coefficients. Simulation results show that the peak sidelobe level can be reduced to -30dB and the achievable system bandwidth is about 400KHz. The technique is adaptable to practical radar systems and applicable for other realtime signal processing.

  9. Modification of polarization filtering technique in HF ground wave radar

    Institute of Scientific and Technical Information of China (English)

    Zhang Guoyi; Tan Zhongji; Wang Jiantao


    The polarization filter using three orthogonal linear polarization antennas can suppress more disturbances than the polarization filter using two orthogonal linear polarization antennas in HF ground wave radar. But the algorithm of the threedimension filter is relatively complicated and not suitable for real-time processing. It can't use linear and nonlinear polarization vector translation technique directly. A modified polarization filter which is simple and has same suppressing ability as the three-dimension polarization filter is given. It only has half parameters of the primary one. Some problems about estimation of polarization parameters and selection of disturbances are discussed. A method of holding the phase of radar backscatter signal constantly is put forward so that unstationary disturbance signal can be processed.

  10. Toward an european Med HF-radar coastal monitoring (United States)

    Molcard, A.; Fraunie, P.


    The monitoring of coastal areas through HF radar is developping in the european Mediterranean coasts, through national and international projects. Surface current maps may be used for process studies, forecast correction through assimilation, or for practical applications in transport studies (jellyfish, oil-spill, search-and-rescue operations). Results of radar campaigns in the North-western Mediterranean (evidence of mesoscale eddy in the Gulf of Lions and identification of dynamical structures by FSLE in the Ligurian Sea) are shown, as well as techniques for current reconstruction using a single site. A new inter-regional european project started in summer 2010, regrouping 5 countries for an integrated oil-spill coastal awarness network is presented.

  11. Nanohertz Frequency Determination for the Gravity Probe B HF SQUID Signal

    CERN Document Server

    Salomon, M; Kozaczuk, J; Berberian, J E; Santiago, D I; Keiser, G M; Silbergleit, A S; Worden, P


    In this paper, we present a method to measure the frequency and the frequency change rate of a digital signal. This method consists of three consecutive algorithms: frequency interpolation, phase differencing, and a third algorithm specifically designed and tested by the authors. The succession of these three algorithms allowed a 5 parts in 10^10 resolution in frequency determination. The algorithm developed by the authors can be applied to a sampled scalar signal such that a model linking the harmonics of its main frequency to the underlying physical phenomenon is available. This method was developed in the framework of the Gravity Probe B (GP-B) mission. It was applied to the High Frequency (HF) component of GP-B's Superconducting QUantum Interference Device (SQUID) signal, whose main frequency fz is close to the spin frequency of the gyroscopes used in the experiment. A 30 nHz resolution in signal frequency and a 0.1 pHz/sec resolution in its decay rate were achieved out of a succession of 1.86 second-long...

  12. A multistatic HF beacon network for ionospheric specification in the Peruvian sector (United States)

    Hysell, D. L.; Milla, M. A.; Vierinen, J.


    A small network of HF beacon transmitters and receivers has been deployed in Peru for specifying the F region ionosphere in the sector. The effort is motivated by ionospheric disturbances associated with equatorial spread F (ESF) and specifically disturbances arising under inauspicious conditions for ESF as determined by numerical simulations. The beacons operate at dual frequencies (2.72 and 3.64 MHz). They are CW but incorporate pseudorandom noise (PRN) coding so that the group delays of the links can be measured. Other observables are power, Doppler shift, bearing, and polarization. A transmitter is currently deployed at Ancon (11°46'37''S, 77°09'1''W, 51 m above sea level (asl)), while receivers are at Jicamarca (11°57'5.8''S, 76°52'27''W, 510 m asl) and Huancayo (12°02'30''S, 75°19'15''W, 3315 m asl). An algorithm for inverting the beacon data combined with electron density profiles from Jicamarca is described. Data and representative solutions from an experimental campaign held in August 2015 are presented and evaluated.

  13. Prolonged magmatism on 4 Vesta inferred from Hf-W analyses of eucrite zircon (United States)

    Roszjar, J.; Whitehouse, M. J.; Srinivasan, G.; Mezger, K.; Scherer, E. E.; Van Orman, J. A.; Bischoff, A.


    The asteroid 4 Vesta is the second most massive planetesimal in the Solar System and a rare example of a planetary object that possibly can be linked to a specific group of differentiated meteorites, the howardite-eucrite-diogenite suite. The 182Hf-182W chronometry of individual zircon grains from six basaltic eucrites revealed distinct growth episodes ranging from 4532 - 11 / + 6 Ma to 4565.0 ± 0.9 Ma and constrains the early thermal history of 4 Vesta, indicating that its mantle generated basaltic melts for at least 35 million years (Myr). Initially, the energy needed for melting was provided by decay of short-lived isotopes, mostly 26Al. The long duration of magmatism despite the short lifetime of 26Al implies that the asteroid must have accreted within the first ∼4 Myr of Solar System formation, similar to the formation of iron meteorite parent bodies, and that its interior must have been thermally well insulated by an early-formed crust that prevented heat loss.

  14. Telemonitoring Adherence to Medications in Heart Failure Patients (TEAM-HF): A Pilot Randomized Clinical Trial. (United States)

    Gallagher, Benjamin D; Moise, Nathalie; Haerizadeh, Mytra; Ye, Siqin; Medina, Vivian; Kronish, Ian M


    Medication nonadherence contributes to hospitalizations in recently discharged patients with heart failure (HF). We aimed to test the feasibility of telemonitoring medication adherence in patients with HF. We randomized 40 patients (1:1) hospitalized for HF to 30 days of loop diuretic adherence monitoring with telephonic support or to passive adherence monitoring alone. Eighty-three percent of eligible patients agreed to participate. The median age of patients was 64 years, 25% were female, and 45% were Hispanic. Overall, 67% of patients were nonadherent (percentage of days that the correct number of doses were taken telemonitoring was acceptable to most patients with HF. Diuretic nonadherence was common even when patients knew they were being monitored. Future studies should assess whether adherence telemonitoring can improve adherence and reduce readmissions among patients with HF. Copyright © 2016 Elsevier Inc. All rights reserved.

  15. The electronic structure of HfF5- and WF5- (United States)

    Chen, Hongshan; Andersson, Pontus; Lindahl, Anton O.; Hanstorp, Dag


    The electronic structure of HfF5-, WF5- and the related species HfF n and WF n is studied using ab initio methods. Computation reveals that the hafnium fluorides are much more stable than the corresponding tungsten fluorides. The detachment energy of HfF5- is 8.8 eV, whereas the corresponding quantity of WF5- is only 3.9 eV. These results show that WF5- can be photodetached while HfF5- is unaffected, and so it is possible by using photodetachment to suppress the interfering isobar 182W in the ion beam of 182Hf. Such information is the precondition for the successful implementation of a future photodetachment process in Accelerator Mass Spectrometry.

  16. Effect of hydrofluoric acid (HF) concentration to pores size diameter of silicon membrane. (United States)

    Burham, Norhafizah; Hamzah, Azrul Azlan; Majlis, Burhanuddin Yeop


    This paper studies parameters which affect the pore size diameter of a silicon membrane. Electrochemical etching is performed in characterise the parameter involved in this process. The parameter has been studied is volume ratio of hydrofluoric acid (HF) and ethanol as an electrolyte aqueous for electrochemical etch. This electrolyte aqueous solution has been mixed between HF and ethanol with volume ratio 3:7, 5:5, 7:3 and 9:1. As a result, the higher volume of HF in this electrolyte gives the smallest pore size diameter compared to the lower volume of HF. These samples have been dipped into HF and ethanol electrolyte aqueous with supplied 25 mA/cm2 current density for 20, 30, 40, and 50 minutes. The samples will inspect under Scanning Electron Microscope (SEM) to execute the pore formations on silicon membrane surface.

  17. Suspended HfO{sub 2} photonic crystal slab on III-nitride/Si platform

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yongjin; Feng, Jiao; Cao, Ziping; Zhu, Hongbo [Nanjing University of Posts and Telecommunications, Grueenberg Research Centre, Nanjing, Jiang-Su (China)


    We present here the fabrication of suspended hafnium oxide (HfO{sub 2}) photonic crystal slab on a III-nitride/Si platform. The calculations are performed to model the suspended HfO{sub 2} photonic crystal slab. Aluminum nitride (AlN) film is employed as the sacrificial layer to form air gap. Photonic crystal patterns are defined by electron beam lithography and transferred into HfO{sub 2} film, and suspended HfO{sub 2} photonic crystal slab is achieved on a III-nitride/Si platform through wet-etching of AlN layer in the alkaline solution. The method is promising for the fabrication of suspended HfO{sub 2} nanostructures incorporating into a III-nitride/Si platform, or acting as the template for epitaxial growth of III-nitride materials. (orig.)

  18. Crystal structure of Si-doped HfO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Lili [Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695 (United States); School of Information Science and Technology, Northwest University, Xi' an 710127 (China); Department of Materials Science and Engineering, University of Florida, Gainesville, Florida 32611 (United States); Nelson, Matthew; Fancher, Chris M. [Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695 (United States); Aldridge, Henry [Department of Materials Science and Engineering, University of Florida, Gainesville, Florida 32611 (United States); Iamsasri, Thanakorn; Forrester, Jennifer S.; Jones, Jacob L., E-mail: [Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695 (United States); Department of Materials Science and Engineering, University of Florida, Gainesville, Florida 32611 (United States); Nishida, Toshikazu [Department of Electrical and Computer Engineering, University of Florida, Gainesville, Florida 32611 (United States); Moghaddam, Saeed [Department of Mechanical and Aerospace Engineering, University of Florida, Gainesville, Florida 32611 (United States)


    Si-doped HfO{sub 2} was prepared by solid state synthesis of the starting oxides. Using Rietveld refinement of high resolution X-ray diffraction patterns, a substitutional limit of Si in HfO{sub 2} was determined as less than 9 at. %. A second phase was identified as Cristobalite (SiO{sub 2}) rather than HfSiO{sub 4}, the latter of which would be expected from existing SiO{sub 2}-HfO{sub 2} phase diagrams. Crystallographic refinement with increased Si-dopant concentration in monoclinic HfO{sub 2} shows that c/b increases, while β decreases. The spontaneous strain, which characterizes the ferroelastic distortion of the unit cell, was calculated and shown to decrease with increasing Si substitution.

  19. Tsunami Arrival Detection with High Frequency (HF Radar

    Directory of Open Access Journals (Sweden)

    Donald Barrick


    Full Text Available Quantitative real-time observations of a tsunami have been limited to deep-water, pressure-sensor observations of changes in the sea surface elevation and observations of sea level fluctuations at the coast, which are essentially point measurements. Constrained by these data, models have been used for predictions and warning of the arrival of a tsunami, but to date no system exists for local detection of an actual incoming wave with a significant warning capability. Networks of coastal high frequency (HF-radars are now routinely observing surface currents in many countries. We report here on an empirical method for the detection of the initial arrival of a tsunami, and demonstrate its use with results from data measured by fourteen HF radar sites in Japan and USA following the magnitude 9.0 earthquake off Sendai, Japan, on 11 March 2011. The distance offshore at which the tsunami can be detected, and hence the warning time provided, depends on the bathymetry: the wider the shallow continental shelf, the greater this time. We compare arrival times at the radars with those measured by neighboring tide gauges. Arrival times measured by the radars preceded those at neighboring tide gauges by an average of 19 min (Japan and 15 min (USA The initial water-height increase due to the tsunami as measured by the tide gauges was moderate, ranging from 0.3 to 2 m. Thus it appears possible to detect even moderate tsunamis using this method. Larger tsunamis could obviously be detected further from the coast. We find that tsunami arrival within the radar coverage area can be announced 8 min (i.e., twice the radar spectral time resolution after its first appearance. This can provide advance warning of the tsunami approach to the coastline locations.

  20. The Thermodynamic Characterization of ZrCo–H, HfCo−H, HfNi−H and Zr{sub 1–x}HfxNi(Co) Alloy–H Systems

    Energy Technology Data Exchange (ETDEWEB)

    Flanagan, Ted B., E-mail:; Noh, Hak; Luo, Suifang


    ZrCo and HfCo intermetallic compounds have the same cubic (CsCl-type) structure and their ternary (Zr{sub 1−x}Hf{sub x})Co alloys are also cubic. ZrNi and HfNi intermetallic compounds have the orthorhombic structure (CrB-type) and the ternary (Zr{sub 1−x}Hf{sub x})Ni alloys also have this structure. Thermodynamic data for hydride formation and decomposition in ZrCo, HfCo and HfNi intermetallic compounds have been determined from reaction calorimetry and from pressure-composition isotherms. Thermodynamic data have been determined for the three ternary alloys: (Zr{sub 0.75}Hf{sub 0.25})Co, (Zr{sub 0.50}Hf{sub 0.50})Co, and (Zr{sub 0.25}Hf{sub 0.75})Co and the four ternary alloys: (Zr{sub 0.875}Hf{sub 0.125})Ni, (Zr{sub 0.75}Hf{sub 0.25})Ni, (Zr{sub 0.50}Hf{sub 0.50})Ni, and (Zr{sub 0.25}Hf{sub 0.75})Ni. This offers the opportunity to learn how the thermodynamic properties of the ternary alloy-H systems change with the stoichiometry of alloys with the same structure. - Highlights: • Calorimetric enthalpies determined for H absorption by ZrCo, HfCo, HfNi are determined. • Ternary alloys, e.g., Zr{sub 1−x}Hf{sub x}Ni, prepared and characterized by x-ray diffraction. • Isotherms for the ternary alloys give thermodynamic parameters for H solution.

  1. Optimised inductively coupled reader antennas for smart HF RFID systems.


    Soodmand, Soheyl


    The Internet of things (IoT) refers to uniquely identifiable objects and their virtual representations in an Internet-like structure to be managed and inventoried by computers. Radio-frequency identification (RFID) - a prerequisite for the IoT - is an automatic way for data transaction in object identification and is used to improve automation, inventory control and checkout operations. An RFID system consists of a reader device and one or several tags. Smart reader systems are...

  2. Single layer of Ge quantum dots in HfO2 for floating gate memory capacitors. (United States)

    Lepadatu, A M; Palade, C; Slav, A; Maraloiu, A V; Lazanu, S; Stoica, T; Logofatu, C; Teodorescu, V S; Ciurea, M L


    High performance trilayer memory capacitors with a floating gate of a single layer of Ge quantum dots (QDs) in HfO2 were fabricated using magnetron sputtering followed by rapid thermal annealing (RTA). The layer sequence of the capacitors is gate HfO 2/floating gate of single layer of Ge QDs in HfO 2/tunnel HfO 2/p-Si wafers. Both Ge and HfO2 are nanostructured by RTA at moderate temperatures of 600-700 °C. By nanostructuring at 600 °C, the formation of a single layer of well separated Ge QDs with diameters of 2-3 nm at a density of 4-5 × 10(15) m(-2) is achieved in the floating gate (intermediate layer). The Ge QDs inside the intermediate layer are arranged in a single layer and are separated from each other by HfO2 nanocrystals (NCs) about 8 nm in diameter with a tetragonal/orthorhombic structure. The Ge QDs in the single layer are located at the crossing of the HfO2 NCs boundaries. In the intermediate layer, besides Ge QDs, a part of the Ge atoms is segregated by RTA at the HfO2 NCs boundaries, while another part of the Ge atoms is present inside the HfO2 lattice stabilizing the tetragonal/orthorhombic structure. The fabricated capacitors show a memory window of 3.8 ± 0.5 V and a capacitance-time characteristic with 14% capacitance decay in the first 3000-4000 s followed by a very slow capacitance decrease extrapolated to 50% after 10 years. This high performance is mainly due to the floating gate of a single layer of well separated Ge QDs in HfO2, distanced from the Si substrate by the tunnel oxide layer with a precise thickness.

  3. Garnet effect on Nd-Hf isotope decoupling: Evidence from the Jinfosi batholith, Northern Tibetan Plateau (United States)

    Huang, Hui; Niu, Yaoling; Mo, Xuanxue


    The initial Nd and Hf isotope ratios of a 420 Ma post-collisional dioritic-granitic batholith from the Northern Tibetan plateau define a negative trend above and orthogonal to the ԐHf(t)-ԐNd(t) terrestrial array. This uncommon trend offers an insight into the origin of the puzzling Nd-Hf isotope decoupling in the crustal rocks. On this trend, samples depleted in heavy rare earth elements (HREEs, i.e., [Dy/Yb]N ≫ 1) deviate most from the terrestrial array whereas samples with flat HREEs (i.e., [Dy/Yb]N ≥ 1) deviate less or plot within the terrestrial array, pointing to the controlling effect of garnet in the magma source. Ancient garnet-bearing residues after melt extraction will have elevated Lu/Hf ratios and can evolve with time to produce high ԐHf(t) at a low ԐNd(t) value. Mixing of melts derived from such source lithologies (high Lu/Hf) with melts possessing a within-terrestrial array Nd-Hf isotopic composition (low Lu/Hf) best explains the observed trend orthogonal to the terrestrial array. The samples from the Jinfosi batholith with the most decoupled Nd-Hf isotope compositions require a larger degree (> 40%) and ancient (i.e., ≥ 1.8 Gyr) previous melt extraction from their source. It follows that the ancient melts with depleted HREEs complementary to those garnet-bearing residues should have low ԐHf values and plot below the terrestrial array, which is indeed shown by some Archean/Paleoproterozic TTGs.

  4. Hardness and Second Phase Percentage of Ni-Ti-Hf Compounds After Heat Treatment at 700C (United States)

    Stanford, Malcolm K.


    The Vickers hardness and second phase precipitation of three ternary intermetallic Ni-Ti-Hf compounds containing either 1, 3 or 5 at.% Hf were compared to 60-Nitinol (55 at.% Ni - 45 at.% Ti). Heat treatment either at 700 C or with a subsequent aging step, hardened the 3 and 5 at.% Hf-containing ternaries to approximately 620 HV (56 HRC). Heat treatment increased the hardness of the 1 at.% Hf compound by more than 25 percent. Average hardness of the 3 and 5 at.% Hf ternaries, though higher than that of the binary Ni-Ti or the Ni-Ti-Hf compound containing 1 at.% Hf, appeared to be fairly insensitive to the different heat treatments. There was a drastic reduction of fatigue-enhancing second phase precipitates for the 5 at.% Hf ternaries compared to the other compounds. These results should guide materials selection for development of aerospace componentry.

  5. Mixing and melt sources in the Miocene Aztec Wash pluton (Nevada, USA) as revealed by zircon Hf and O and whole rock Sr, Nd, and Hf isotopes (United States)

    Ryan, M.; Miller, J. S.; Miller, C. F.; Bromley, S.; Davies, G. R.; Schmitt, A. K.


    The 15.6 Ma Aztec Wash Pluton (AWP) is one of several Miocene intrusions located within the northern Colorado River extensional corridor. Extensive E-W tilting of fault blocks has exposed the pluton from the roof to 5 km structural depth. Earlier field and petrologic studies subdivided the AWP into two distinct zones: (1) a Granite Zone (GZ) comprised of relatively homogeneous granite with subtle differences in textures and mineralogy; (2) a Heterogeneous Zone (HZ), which interfingers the GZ, contains evidence for mafic and felsic magma input with a wide compositional range (42-78 wt% SiO2), and abundant field evidence for hybridization. Previous whole rock geochemistry and zircon trace element analyses indicated that compositional variation was produced by multi-component mixing between mafic and felsic melts within the HZ. New whole rock Sr, Nd, and Hf isotope data from the HZ show that all rocks (including high-silica granites) formed by mixing Precambrian crust and enriched mantle, with mixtures having a large mantle fraction (≥50%). New Hf (n=189) and O (n=241) isotope analyses of zircon from samples in the HZ confirm these melt sources and provide a broader perspective on hybridization processes within the AWP. Zircon grains from all samples show heterogeneous Hf and O isotopic compositions (-5 to -18 ɛHf; 4.5-7.5% δ18O), but despite the clear signature of Precambrian crust in the whole rock data, obvious Precambrian zircons (or cores) were mostly absent; only one zircon was clearly Precambrian (ɛHf = -25). Resolvable intragrain variability is relatively limited (including the Precambrian grain, which is unzoned). Zircons from hand samples and from compositional groups also show heterogeneous ɛHf and δ18O values, although the spreads are more restricted than in the whole data set (6-10 ɛHf in granites, 5-7 ɛHf in intermediate "hybrids", 5-6 ɛHf in gabbro/diorite sheets). Oxygen isotope values for the zircons also show intra-handsample heterogeneity

  6. Computational-Experimental Processing of Boride/Carbide Composites by Reactive Infusion of Hf Alloy Melts into B4C (United States)


    elements from the Hf family (i.e., Hf, Ti and Zr ) into a capillary to understand the effects of surface tension and viscosity during processing of melts...project primarily investigated computationally the infusion of liquid elements from the Hf family (i.e., Hf, Ti and Zr ) into a capillary to understand the... effects of surface tension and viscosity during processing of melts with a packed bed of B4C to form boride-carbide precipitates. Although the

  7. Structure, optical properties and thermal stability of HfErO films deposited by simultaneous RF and VHF magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, H.Y. [Soochow University, College of Physics, Optoelectronics and Energy and Collaborative Innovation Center of Suzhou Nano Science and Technology, Suzhou (China); Nanjing University of Posts and Telecommunications, School of Tongda, Nanjing (China); Soochow University, Key Lab of Advanced Optical Manufacturing Technologies of Jiangsu Province and Key Lab of Modern Optical Technologies of Education Ministry of China, Suzhou (China); He, H.J.; Zhang, Z.; Jin, C.G.; Yang, Y.; Wang, Y.Y.; Ye, C. [Soochow University, College of Physics, Optoelectronics and Energy and Collaborative Innovation Center of Suzhou Nano Science and Technology, Suzhou (China); Soochow University, Key Lab of Advanced Optical Manufacturing Technologies of Jiangsu Province and Key Lab of Modern Optical Technologies of Education Ministry of China, Suzhou (China); Zhuge, L.J. [Soochow University, Key Lab of Advanced Optical Manufacturing Technologies of Jiangsu Province and Key Lab of Modern Optical Technologies of Education Ministry of China, Suzhou (China); Soochow University, Analysis and Testing Center, Suzhou (China); Wu, X.M. [Soochow University, College of Physics, Optoelectronics and Energy and Collaborative Innovation Center of Suzhou Nano Science and Technology, Suzhou (China); Soochow University, Key Lab of Advanced Optical Manufacturing Technologies of Jiangsu Province and Key Lab of Modern Optical Technologies of Education Ministry of China, Suzhou (China); Chinese Academy of Sciences, State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Shanghai (China)


    HfErO films are deposited on Si substrates by simultaneous radio frequency (RF) and very high frequency (VHF) magnetron sputtering technique. The content of the doped ingredient of Er and the body composition of HfO{sub x} are, respectively, controlled through the VHF and RF powers. Low content of Er doping in the HfErO films can be achieved, because the VHF source of 27.12 MHz has higher ion energy and lower ion flux than the RF source resulting in low sputtering rate in the magnetron sputtering system. The structure, optical properties and thermal stability of the HfErO films are investigated in this work. Results show that the doped content of Er is independently controlled by the VHF power. The oxygen vacancies are created by the Er incorporation. The hafnium in the HfErO films forms mixed valence of Hf{sup 2+} and Hf{sup 4+}. The HfErO films are composed with the structures of HfO{sub 2}, HfO and ErO{sub x}, which can be optimized through the VHF power. At high VHF power, the Hf-Er-O bonds are formed, which demonstrates that the Er atoms are doped into the lattice of HfO{sub 2} in the HfErO films. The HfErO films have bad thermal stability as the crystallization temperature decreases from 900 to 800 C. After thermal annealing, cubic phase of HfO{sub 2} are stabilized, which is ascribed to the oxygen vacancies creation by the Er incorporation. The optical properties such as the refractive index and the optical band gap of the HfErO films are optimized by the VHF power. (orig.)

  8. Unification of automatic target tracking and automatic target recognition (United States)

    Schachter, Bruce J.


    The subject being addressed is how an automatic target tracker (ATT) and an automatic target recognizer (ATR) can be fused together so tightly and so well that their distinctiveness becomes lost in the merger. This has historically not been the case outside of biology and a few academic papers. The biological model of ATT∪ATR arises from dynamic patterns of activity distributed across many neural circuits and structures (including retina). The information that the brain receives from the eyes is "old news" at the time that it receives it. The eyes and brain forecast a tracked object's future position, rather than relying on received retinal position. Anticipation of the next moment - building up a consistent perception - is accomplished under difficult conditions: motion (eyes, head, body, scene background, target) and processing limitations (neural noise, delays, eye jitter, distractions). Not only does the human vision system surmount these problems, but it has innate mechanisms to exploit motion in support of target detection and classification. Biological vision doesn't normally operate on snapshots. Feature extraction, detection and recognition are spatiotemporal. When vision is viewed as a spatiotemporal process, target detection, recognition, tracking, event detection and activity recognition, do not seem as distinct as they are in current ATT and ATR designs. They appear as similar mechanism taking place at varying time scales. A framework is provided for unifying ATT and ATR.

  9. Application of IRI-Plas in Ionospheric Tomography and HF Communication Studies with Assimilation of GPS-TEC (United States)

    Arikan, Feza; Gulyaeva, Tamara; Sezen, Umut; Arikan, Orhan; Toker, Cenk; Hakan Tuna, MR.; Erdem, Esra


    International Reference Ionosphere is the most acknowledged climatic model of ionosphere that provides electron density profile and hourly, monthly median values of critical layer parameters of the ionosphere for a desired location, date and time between 60 to 2,000 km altitude. IRI is also accepted as the International Standard Ionosphere model. Recently, the IRI model is extended to the Global Positioning System (GPS) satellite orbital range of 20,000 km. The new version is called IRI-Plas and it can be obtained from /SPIM/. A user-friendly online version is also provided at as a space weather service. Total Electron Content (TEC), which is defined as the line integral of electron density on a given ray path, is an observable parameter that can be estimated from earth based GPS receivers in a cost-effective manner as GPS-TEC. One of the most important advantages of IRI-Plas is the possible input of GPS-TEC to update the background deterministic ionospheric model to the current ionospheric state. This option is highly useful in regional and global tomography studies and HF link assessments. IONOLAB group currently implements IRI-Plas as a background model and updates the ionospheric state using GPS-TEC in IONOLAB-CIT and IONOLAB-RAY algorithms. The improved state of ionosphere allows the most reliable 4-D imaging of electron density profiles and HF and satellite communication link simulations.This study is supported by TUBITAK 115E915 and joint TUBITAK 114E092 and AS CR 14/001.

  10. Archean Lithosphere Beneath Arctic Canada: Lu-Hf Isotope Systematics for Kimberlite-Hosted Garnet-Peridotites From Somerset Island (United States)

    Schmidberger, S. S.; Simonetti, A.; Francis, D.; Gariepy, C.


    Knowledge of the age of lithospheric mantle underlying the continents provides valuable constraints for the timing of formation and stabilization of Archean cratons. This study reports Lu-Hf isotopic data for garnet-peridotites, and their constituent garnets, from the Nikos kimberlite (100 Ma) on Somerset Island in the Canadian Arctic obtained using a Micromass IsoProbe multicollector inductively coupled plasma mass spectrometer (MC-ICP-MS) at GEOTOP-UQAM. The low temperature peridotites (1100 C; 160-190 km) and their 176Hf/177Hf(0.1Ga) isotopic compositions (0.28265-0.28333; \\epsilonHf(0.1Ga)=-2 to +22) are less radiogenic than those of the shallow xenoliths. A Lu-Hf isochron for six peridotites yields a mid Archean age of 3.4\\pm0.3 Ga and an initial 176Hf/177Hf ratio of 0.28101\\pm24. The remaining peridotites (n=9), in contrast, are characterized by extremely high (+35) initial \\epsilonHf(3.4Ga) values, which correlate negatively with their 176Lu/177Hf ratios, suggesting addition of Hf as a result of metasomatic interaction with the host kimberlite. The garnets from the low temperature (3.4 Ga old) peridotites are characterized by high 176Lu/177Hf ratios and define an errorchron age of 1.4\\pm0.2 Ga, which may reflect re-equilibration of Hf during kimberlite magmatism.

  11. Design for human factors (DfHF): a grounded theory for integrating human factors into production design processes. (United States)

    Village, Judy; Searcy, Cory; Salustri, Filipo; Patrick Neumann, W


    The 'design for human factors' grounded theory explains 'how' human factors (HF) went from a reactive, after-injury programme in safety, to being proactively integrated into each step of the production design process. In this longitudinal case study collaboration with engineers and HF Specialists in a large electronics manufacturer, qualitative data (e.g. meetings, interviews, observations and reflections) were analysed using a grounded theory methodology. The central tenet in the theory is that when HF Specialists acclimated to the engineering process, language and tools, and strategically aligned HF to the design and business goals of the organisation, HF became a means to improve business performance. This led to engineers 'pulling' HF Specialists onto their team. HF targets were adopted into engineering tools to communicate HF concerns quantitatively, drive continuous improvement, visibly demonstrate change and lead to benchmarking. Senior management held engineers accountable for HF as a key performance indicator, thus integrating HF into the production design process. Practitioner Summary: Research and practice lack explanations about how HF can be integrated early in design of production systems. This three-year case study and the theory derived demonstrate how ergonomists changed their focus to align with design and business goals to integrate HF into the design process.

  12. Annual review in automatic programming

    CERN Document Server

    Goodman, Richard


    Annual Review in Automatic Programming, Volume 2 is a collection of papers that discusses the controversy about the suitability of COBOL as a common business oriented language, and the development of different common languages for scientific computation. A couple of papers describes the use of the Genie system in numerical calculation and analyzes Mercury autocode in terms of a phrase structure language, such as in the source language, target language, the order structure of ATLAS, and the meta-syntactical language of the assembly program. Other papers explain interference or an ""intermediate

  13. Automatic analysis of multiparty meetings

    Indian Academy of Sciences (India)

    Steve Renals


    This paper is about the recognition and interpretation of multiparty meetings captured as audio, video and other signals. This is a challenging task since the meetings consist of spontaneous and conversational interactions between a number of participants: it is a multimodal, multiparty, multistream problem. We discuss the capture and annotation of the Augmented Multiparty Interaction (AMI) meeting corpus, the development of a meeting speech recognition system, and systems for the automatic segmentation, summarization and social processing of meetings, together with some example applications based on these systems.

  14. Annual review in automatic programming

    CERN Document Server

    Goodman, Richard


    Annual Review in Automatic Programming, Volume 4 is a collection of papers that deals with the GIER ALGOL compiler, a parameterized compiler based on mechanical linguistics, and the JOVIAL language. A couple of papers describes a commercial use of stacks, an IBM system, and what an ideal computer program support system should be. One paper reviews the system of compilation, the development of a more advanced language, programming techniques, machine independence, and program transfer to other machines. Another paper describes the ALGOL 60 system for the GIER machine including running ALGOL pro

  15. Automatic Inference of DATR Theories

    CERN Document Server

    Barg, P


    This paper presents an approach for the automatic acquisition of linguistic knowledge from unstructured data. The acquired knowledge is represented in the lexical knowledge representation language DATR. A set of transformation rules that establish inheritance relationships and a default-inference algorithm make up the basis components of the system. Since the overall approach is not restricted to a special domain, the heuristic inference strategy uses criteria to evaluate the quality of a DATR theory, where different domains may require different criteria. The system is applied to the linguistic learning task of German noun inflection.

  16. Coordinated hybrid automatic repeat request

    KAUST Repository

    Makki, Behrooz


    We develop a coordinated hybrid automatic repeat request (HARQ) approach. With the proposed scheme, if a user message is correctly decoded in the first HARQ rounds, its spectrum is allocated to other users, to improve the network outage probability and the users\\' fairness. The results, which are obtained for single- and multiple-antenna setups, demonstrate the efficiency of the proposed approach in different conditions. For instance, with a maximum of M retransmissions and single transmit/receive antennas, the diversity gain of a user increases from M to (J+1)(M-1)+1 where J is the number of users helping that user.

  17. Commutated automatic gain control system (United States)

    Yost, S. R.


    The commutated automatic gain control (AGC) system was designed and built for the prototype Loran-C receiver is discussed. The current version of the prototype receiver, the Mini L-80, was tested initially in 1980. The receiver uses a super jolt microcomputer to control a memory aided phase loop (MAPLL). The microcomputer also controls the input/output, latitude/longitude conversion, and the recently added AGC system. The AGC control adjusts the level of each station signal, such that the early portion of each envelope rise is about at the same amplitude in the receiver envelope detector.

  18. On automatic machine translation evaluation

    Directory of Open Access Journals (Sweden)

    Darinka Verdonik


    Full Text Available An important task of developing machine translation (MT is evaluating system performance. Automatic measures are most commonly used for this task, as manual evaluation is time-consuming and costly. However, to perform an objective evaluation is not a trivial task. Automatic measures, such as BLEU, TER, NIST, METEOR etc., have their own weaknesses, while manual evaluations are also problematic since they are always to some extent subjective. In this paper we test the influence of a test set on the results of automatic MT evaluation for the subtitling domain. Translating subtitles is a rather specific task for MT, since subtitles are a sort of summarization of spoken text rather than a direct translation of (written text. Additional problem when translating language pair that does not include English, in our example Slovene-Serbian, is that commonly the translations are done from English to Serbian and from English to Slovenian, and not directly, since most of the TV production is originally filmed in English. All this poses additional challenges to MT and consequently to MT evaluation. Automatic evaluation is based on a reference translation, which is usually taken from an existing parallel corpus and marked as a test set. In our experiments, we compare the evaluation results for the same MT system output using three types of test set. In the first round, the test set are 4000 subtitles from the parallel corpus of subtitles SUMAT. These subtitles are not direct translations from Serbian to Slovene or vice versa, but are based on an English original. In the second round, the test set are 1000 subtitles randomly extracted from the first test set and translated anew, from Serbian to Slovenian, based solely on the Serbian written subtitles. In the third round, the test set are the same 1000 subtitles, however this time the Slovene translations were obtained by manually correcting the Slovene MT outputs so that they are correct translations of the

  19. Linked alternating forms and linked symplectic Grassmannians

    CERN Document Server

    Osserman, Brian


    Motivated by applications to higher-rank Brill-Noether theory and the Bertram-Feinberg-Mukai conjecture, we introduce the concepts of linked alternating and linked symplectic forms on a chain of vector bundles, and show that the linked symplectic Grassmannians parametrizing chains of subbundles isotropic for a given linked symplectic form has good dimensional behavior analogous to that of the classical symplectic Grassmannian.

  20. Similar crustal evolution in the western units of the Adrar Souttouf Massif (Moroccan Sahara) and the Avalonian terranes: Insights from Hf isotope data (United States)

    Gärtner, Andreas; Villeneuve, Michel; Linnemann, Ulf; Gerdes, Axel; Youbi, Nasrrddine; Hofmann, Mandy


    The Adrar Souttouf Massif is located at the western margin of the West African Craton and consists of several NNE-SSW trending units. Of them, the two westernmost have been interpreted to be linked with the Avalonian terrane assemblage and Meguma, respectively. New Hf isotopic data corroborates the Avalon correlation but has no impact one way or another on the possible Meguma connection, as there is no Hf data available from the latter. The obtained pattern of εHf(t) values vs. zircon age of the likely Avalonia related Oued Togba unit is similar to published data from Avalonia. Zircons of this unit show characteristic patterns of crustal mixing at 0.7 to 1.3 Ga and 1.75 to 2.25 Ga, while juvenile crust was likely formed around 0.6 to 0.75 Ga, from 1.2 to 2.2 Ga, and between 2.5 and 3.2 Ga. The zircons of the Sebkha Gezmayet unit reveal crustal mixing for the entire Palaeozoic and Neoproterozoic, from 2.05 to 2.11 Ga, and 2.8 to 2.9 Ga. Juvenile crust formation is interpreted to have occurred from 0.5 to 0.7 Ga, at around 2.1 Ga, and at ca. 2.9 Ga. As Mesoproterozoic zircons are abundant in the likely Avalonia-like Oued Togba unit, but uncommon at the West African Craton, their origin has to be found elsewhere. A comparison of available Hf data from Amazonia and Baltica, the two potential source cratons of Avalonia, shows similarities but is hampered by the lack of available data from Amazonia. Finally, a few grains from both units have Eoarchaean model ages. Among similar grains from other peri-Gondwanan terranes, they give indication of partial recycling of Eoarchaean crust in the vicinity of the northwestern West African Craton.

  1. Photocurrent generation in carbon nanotube/cubic-phase HfO2 nanoparticle hybrid nanocomposites

    Directory of Open Access Journals (Sweden)

    Protima Rauwel


    Full Text Available A hybrid material consisting of nonfunctionalized multiwall carbon nanotubes (MWCNTs and cubic-phase HfO2 nanoparticles (NPs with an average diameter of 2.6 nm has been synthesized. Free standing HfO2 NPs present unusual optical properties and a strong photoluminescence emission in the visible region, originating from surface defects. Transmission electron microscopy studies show that these NPs decorate the MWCNTs on topological defect sites. The electronic structure of the C K-edge in the nanocomposites was probed by electron energy loss spectroscopy, highlighting the key role of the MWCNT growth defects in anchoring HfO2 NPs. A combined optical emission and absorption spectroscopy approach illustrated that, in contrast to HfO2 NPs, the metallic MWCNTs do not emit light but instead expose their discrete electronic structure in the absorption spectra. The hybrid material manifests characteristic absorption features with a gradual merger of the MWCNT π-plasmon resonance band with the intrinsic defect band and fundamental edge of HfO2. The photoluminescence of the nanocomposites indicates features attributed to combined effects of charge desaturation of HfO2 surface states and charge transfer to the MWCNTs with an overall reduction of radiative recombination. Finally, photocurrent generation under UV–vis illumination suggests that a HfO2 NP/MWCNT hybrid system can be used as a flexible nanodevice for light harvesting applications.

  2. Superelasticity and Shape Memory Behavior of NiTiHf Alloys (United States)

    Sehitoglu, H.; Wu, Y.; Patriarca, L.; Li, G.; Ojha, A.; Zhang, S.; Chumlyakov, Y.; Nishida, M.


    The NiTiHf high-temperature shape memory alloys represent a significant advancement in extending the functionality of binary NiTi to elevated temperatures above 100 °C. Despite this potential, the previous results in the literature point to a disappointingly low shape memory strains with addition of Hf. On the other hand, based on theoretical analysis using the lattice constants, the transformation strains should increase substantially with increase in Hf content. The present paper addresses this discrepancy, and using atomistic simulations, determination of twinning modes in martensite with transmission electron microscopy, digital image measurements of habit plane orientation, and strains in single-crystal specimens show that the experimental transformation strains in NiTiHf indeed increase with increasing Hf to unprecedented strain levels near 20%. The Hf contents considered were in the range 6.25-25 at.%, and NiTi (0% Hf) results are provided as the baseline. The current work represents more than 60 experiments representing an extremely thorough study on single crystals and polycrystals.

  3. Isolation and Characterization of a Virulent Bacteriophage φPA-HF17 of Pseudomonas aeruginosa

    Directory of Open Access Journals (Sweden)

    Fang Han


    Full Text Available Pseudomonas aeruginosa, an important causative agent of nosocomial infection, is found throughout the hospital environment in moist reservoirs, and multidrug-resistant strains of P. aeruginosa have been increasingly reported worldwide. Bacteriophages are often considered potential therapeutic candidates in treating infectious diseases. In this study, a novel virulent bacteriophage φPA-HF17, specific infecting clinical isolates of P. aeruginosa, was isolated and characterized from environmental sewage. Transmission electron microscopy showed that phage φPA-HF17 had an icosahedral head with a very short tail, and exhibited characteristics typical of a podovirus. Restriction analysis indicated that phage φPA-HF17 was a double-stranded DNA virus, which might be digested by some restriction endonucleases. Phage φPA-HF17 was highly infectious with a rapid adsorption (>90% adsorbed in 4 min. In a one-step growth experiment, phage φPA-HF17 was shown having a latent period of 10 minute, with corresponding burst sizes of 200 PFU/cell. Furthermore, when φPA-HF17 alone was incubated at different pHs and different temperatures, the phage was stable over a wide pH range (4 to 10 and at extreme temperature (50°C. These results suggest that φPA-HF17 may be candidate therapeutic phage to control P. aeruginosa infection.

  4. In-situ atomic layer deposition growth of Hf-oxide

    Energy Technology Data Exchange (ETDEWEB)

    Karavaev, Konstantin


    We have grown HfO{sub 2} on Si(001) by atomic layer deposition (ALD) using HfCl{sub 4}, TEMAHf, TDMAHf and H{sub 2}O as precursors. The early stages of the ALD were investigated with high-resolution photoelectron spectroscopy and X-ray absorption spectroscopy. We observed the changes occurring in the Si 2p, O 1s, Hf 4f, Hf 4d, and Cl 2p (for HfCl{sub 4} experiment) core level lines after each ALD cycle up to the complete formation of two layers of HfO{sub 2}. The investigation was carried out in situ giving the possibility to determine the properties of the grown film after every ALD cycle or even after a half cycle. This work focused on the advantages in-situ approach in comparison with ex-situ experiments. The study provides to follow the evolution of the important properties of HfO{sub 2}: contamination level, density and stoichiometry, and influence of the experimental parameters to the interface layer formation during ALD. Our investigation shows that in-situ XPS approach for ALD gives much more information than ex-situ experiments. (orig.)

  5. Linear Trimeric Hafnium Clusters in Hf0.86(1I3

    Directory of Open Access Journals (Sweden)

    Jan Beekhuizen


    Full Text Available The reduction of hafnium tetraiodide, HfI4, with aluminum at 600 °C or 850 °C in the presence of a NaI flux resulted in black single crystals of Hf0.86(1I3. This composition corresponds well to the upper end of the non-stoichiometry range 0.89 ≤ x ≤ 1.00 previously reported for HfxI3. The crystal structure (a = 1250.3(2, c = 1999.6(3 pm, R-3m, Z = 18 is made up of hexagonal closest packed layers of iodide ions. One third of the octahedral holes would be filled as in TiI3 or ZrI3 if it were Hf1.00I3. In Hf0.86(1I3, one out of six octahedral holes along [001] are, however, only occupied by 16%. In contrast to TiI3-I and ZrI3, one striking structural feature is in the formation of linear hafnium trimers with identical Hf―Hf distances of 318.3(2 pm rather than the formation of dimers. These may be associated with Hf―Hf bonding although only 2.64 electrons are available for one Hf5.16I18 column.

  6. Microstructure and Phase Stability of Single Crystal NiAl Alloyed with Hf and Zr (United States)

    Locci, I. E.; Dickerson, R. M.; Garg, A.; Noebe, R. D.; Whittenberger, J. D.; Nathal, M. V.; Darolia, R.


    Six near stoichiometric, NiAl single-crystal alloys, with 0.05-1.5 at.% of Hf and Zr additions plus Si impurities, were microstructurally analyzed in the as-cast, homogenized, and aged conditions. Hafnium-rich interdendritic regions, containing the Heusler phase (Ni2AlHf), were found in all the as-cast alloys containing Hf. Homogenization heat treatments partially reduced these interdendritic segregated regions. Transmission electron microscopy (TEM) observations of the as-cast and homogenized microstructures revealed the presence of a high density of fine Hf (or Zr) and Si-rich precipitates. These were identified as G-phase, Nil6X6Si7, or as an orthorhombic NiXSi phase, where X is Hf or Zr. Under these conditions the expected Heusler phase (beta') was almost completely absent. The Si responsible for the formation of the G and NiHfSi phases is the result of molten metal reacting with the Si-containing crucible used during the casting process. Varying the cooling rates after homogenization resulted in the refinement or complete suppression of the G and NiHfSi phases. In some of the alloys studied, long-term aging heat treatments resulted in the formation of Heusler precipitates, which were more stable at the aging temperature and coarsened at the expense of the G-phase. In other alloys, long-term aging resulted in the formation of the NiXSi phase. The stability of the Heusler or NiXSi phases can be traced to the reactive element (Hf or Zr) to silicon ratio. If the ratio is high, then the Heusler phase appears stable after long time aging. If the ratio is low, then the NiHfSi phase appears to be the stable phase.

  7. Vibrational relaxation of hydrogen fluoride by HF dimers in a laser excited nozzle beam

    Energy Technology Data Exchange (ETDEWEB)

    Knuth, E.L.; Rubahn, H.; Toennies, J.P.; Wanner, J.


    An HF nozzle beam and a cw HF laser beam in a coaxial and antiparallel arrangement facilitated exciting HF molecules vibrationally in v-italic = 1,J-italic up to the saturation limit. A beam consisting exclusively of monomeric HF was generated by heating the beam source to 600 K and was confirmed using a mass spectrometer. Energy-flux measurements made using a bolometer indicate that the vibrational energy distribution initiated by the laser is conserved, confirming that V--T energy transfer to monomers is slow. The maximum measured flux of HF(v-italic = 1,J-italic) molecules was 1.5 x 10/sup 17/ molecules s/sup -1/ sr/sup -1/ at 670 mbar stagnation pressure. Beams consisting of a mixture of monomeric and polymeric HF were generated using appropriate combinations of source temperature and pressure. In the presence of dimers, the excited monomers relax rapidly by a fast V--V transfer and subsequent predissociation of the metastable dimers. The loss of beam energy due to energy transport by the departing dimer fragments was detected bolometrically. The laser-induced depletion of dimers was determined over a wide source pressure range at T-italic/sub 0/ = 300 K using a mass spectrometer. From a kinetic model of these dimer-depletion data, the product of cross section and transfer probability for V--V energy transfer from HF (v-italic = 1) monomers to dimers was deduced to be 14 A-circle/sup 2/. The terminal-dimer-concentration equation for HF nozzle beams was refined. An analysis of the energy fluxes measured by the bolometer with no laser excitation of the beam revealed that, for an HF nozzle beam, the flow from the source to the detector is, in general, nonisenthalpic due to the onset of dimerization. Mach-number focusing enriches the dimer mole fractions detected by the bolometer.

  8. Properties of HfAlO film deposited by plasma enhanced atomic layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Duo [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Micro-system and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050 (China); Cheng, Xinhong, E-mail: [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Micro-system and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050 (China); Jia, Tingting; Zheng, Li; Xu, Dawei; Wang, Zhongjian; Xia, Chao; Yu, Yuehui [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Micro-system and Information Technology, Chinese Academy of Sciences, Changning Road 865, Shanghai 200050 (China)


    Plasma enhanced atomic layer deposition (PEALD) method can reduce film growing temperature, and allow in situ plasma treatment. In this work, HfAlO and HfO{sub 2} films were deposited with PEALD at 160 °C. Microstructure analysis showed that both films were amorphous after rapid thermal annealing (RTA) treatment, and HfAlO sample showed better interfacial structure than HfO{sub 2}. X-ray photoelectron spectroscopy (XPS) spectra indicated that main component of the interfacial layer of HfAlO sample was Hf–Si–O and Al–Si–O bonds, the valence band offset value between the HfAlO film and Si substrate was calculated to be 2.5 eV. The dominant leakage current mechanism of the samples was Schottky emission at a low electric field (<1.4 MV/cm), and Poole–Frenkel emission mechanism at a higher electric field (>1.4 MV/cm). The equivalent oxide thicknesses (EOT) of the HfAlO samples were 1.0 nm and 1.3 nm, respectively. The density of interface states between dielectric and substrate were calculated to be 1.2 × 10{sup 12} eV{sup −1}cm{sup −2} and 1.3 × 10{sup 12} eV{sup −1}cm{sup −2}, respectively. In comparison with HfO{sub 2} film, HfAlO film has good interfacial structure and electrical performance.

  9. Automatic generation of tourist brochures

    KAUST Repository

    Birsak, Michael


    We present a novel framework for the automatic generation of tourist brochures that include routing instructions and additional information presented in the form of so-called detail lenses. The first contribution of this paper is the automatic creation of layouts for the brochures. Our approach is based on the minimization of an energy function that combines multiple goals: positioning of the lenses as close as possible to the corresponding region shown in an overview map, keeping the number of lenses low, and an efficient numbering of the lenses. The second contribution is a route-aware simplification of the graph of streets used for traveling between the points of interest (POIs). This is done by reducing the graph consisting of all shortest paths through the minimization of an energy function. The output is a subset of street segments that enable traveling between all the POIs without considerable detours, while at the same time guaranteeing a clutter-free visualization. © 2014 The Author(s) Computer Graphics Forum © 2014 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

  10. ACIR: automatic cochlea image registration (United States)

    Al-Dhamari, Ibraheem; Bauer, Sabine; Paulus, Dietrich; Lissek, Friedrich; Jacob, Roland


    Efficient Cochlear Implant (CI) surgery requires prior knowledge of the cochlea's size and its characteristics. This information helps to select suitable implants for different patients. To get these measurements, a segmentation method of cochlea medical images is needed. An important pre-processing step for good cochlea segmentation involves efficient image registration. The cochlea's small size and complex structure, in addition to the different resolutions and head positions during imaging, reveals a big challenge for the automated registration of the different image modalities. In this paper, an Automatic Cochlea Image Registration (ACIR) method for multi- modal human cochlea images is proposed. This method is based on using small areas that have clear structures from both input images instead of registering the complete image. It uses the Adaptive Stochastic Gradient Descent Optimizer (ASGD) and Mattes's Mutual Information metric (MMI) to estimate 3D rigid transform parameters. The use of state of the art medical image registration optimizers published over the last two years are studied and compared quantitatively using the standard Dice Similarity Coefficient (DSC). ACIR requires only 4.86 seconds on average to align cochlea images automatically and to put all the modalities in the same spatial locations without human interference. The source code is based on the tool elastix and is provided for free as a 3D Slicer plugin. Another contribution of this work is a proposed public cochlea standard dataset which can be downloaded for free from a public XNAT server.

  11. QXT-full Automatic Saccharify Instrument

    Institute of Scientific and Technical Information of China (English)


    QXT is a full automatic saccharify instrument of eight holes . The instrument use process control technology of micro-computer. It can realize automatic of saccharify full process correctly. Due to adapt control mode of high precision expert PID and digit automatic calibration technology of fill micro computer, not only ensure precision of linear raising temperature region (1 ℃ /min) and constant temperature region (temperature error ±0.2 ℃), but also overcome the disturbance

  12. Automatic Control of Water Pumping Stations

    Institute of Scientific and Technical Information of China (English)

    Muhannad Alrheeh; JIANG Zhengfeng


    Automatic Control of pumps is an interesting proposal to operate water pumping stations among many kinds of water pumping stations according to their functions.In this paper, our pumping station is being used for water supply system. This paper is to introduce the idea of pump controller and the important factors that must be considering when we want to design automatic control system of water pumping stations. Then the automatic control circuit with the function of all components will be introduced.

  13. Ti insertion in the MTe5 (M = Zr, Hf structure type: Hf0.78Ti0.22Te5

    Directory of Open Access Journals (Sweden)

    Hoseop Yun


    Full Text Available The group 5 mixed-metal telluride, Hf0.78Ti0.22Te5 (hafnium titanium pentatelluride, is isostructural with the binary phases HfTe5 and ZrTe5 and forms a layered structure extending parallel to (010. The layers are made up from chains of bicapped metal-centered trigonal prisms and zigzag Te chains. The metal site (site symmetry m2m is occupied by statistically disordered Hf [78.1 (5%] and Ti [21.9 (5%]. In addition to the regular Te—Te pair [2.7448 (13 Å] forming the short base of the equilateral triangle of the trigonal prism, an intermediate Te...Te separation [2.9129 (9 Å] is also found. The classical charge balance of the compound can be described as [M4+][Te2−][Te22−][Te20] (M = Hf, Ti. The individual metal content can vary in different crystals, apparently forming a random substitutional solid solution (Hf1-xTixTe5, with 0.15 ≤ x ≤ 0.22.

  14. First-principles calculated spin-gapless semiconducting behavior in quaternary VCoHfGa and CrFeHfGa Heusler compounds

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Xiude; Wu, Xiaolin [Institute of Theoretical Physics, Zunyi Normal College, Zunyi 563002 (China); Wu, Bo, E-mail: [Institute of Theoretical Physics, Zunyi Normal College, Zunyi 563002 (China); School of Marine Science and Technology, Northwestern Polytechnical University, Xian 710072 (China); Feng, Yu [School of Physical Science and Technology, Southwest University, Chongqing 400715 (China); Li, Ping [Institute for Clean Energy & Advanced Materials (ICAEM), Southwest University, Chongqing 400715 (China); Huang, Haishen [Institute of Theoretical Physics, Zunyi Normal College, Zunyi 563002 (China)


    Highlights: • Structural, electronic and magnetic properties of quaternary Heusler alloy [VCo,CrFe]HfGa were detected theoretically. • The quaternary Heusler alloy [VCo,CrFe]HfGa are (or are nearly) spin gapless semiconductors at the lowest energy state. • The ferromagnetic coupling plays an important role in magnetism. - Abstract: By using generalized gradient approximation (GGA) scheme within the density functional theory (DFT), the structural, electronic and magnetic properties of LiMgPdSn-type quaternary Heusler alloy CrFeHfGa and VCoHfGa were detected compressively. The results reveal that the two alloys are (or are nearly) potential spin gapless semiconductors with a magnetic moment of 3 μ{sub B} per primitive cell and the minority-spin gap of 0.8 eV and 0.6 eV at Fermi level (ε{sub F}) during the rate of lattice change of about −5%, respectively. We deduce that the ferromagnetic coupling among transitional metals plays an important role in magnetism of Heusler alloy [CrFe,VCo]HfGa.

  15. First-principles study of the (001) surface of cubic PbHfO3 and BaHfO3

    Institute of Scientific and Technical Information of China (English)

    Ni Guang-Xin; Wang Yuan-Xu


    Using first-principles techniques, we investigate the (001) surfaces of cubic PbHfO3 (PHO) and BaHfO3 (BHO) terminated with both AO (A=Pb and Ba) and HfO2- Surface structure, partial density of states, band structure, and surface energy are obtained. The BaO surface is found to be similar to its counterpart in BHO. For the HfO2-terminated surface of cubic PHO, the largest relaxation appears on the second-layer atoms but not on the first-layer ones. The analysis of the structure relaxation parameters reveals that the rumpling of the (001) surface for PHO is stronger than that for BHO. The surface thermodynamic stability is explored, and it is found that both the PbO- and the BaO-terminated surfaces are more stable than the HfO2-terminated surfaces for PHO and BHO, respectively. The surface energy calculations show that the (001) surface of PHO is more easily constructed than that of BHO.

  16. PDBalert: automatic, recurrent remote homology tracking and protein structure prediction

    Directory of Open Access Journals (Sweden)

    Söding Johannes


    Full Text Available Abstract Background During the last years, methods for remote homology detection have grown more and more sensitive and reliable. Automatic structure prediction servers relying on these methods can generate useful 3D models even below 20% sequence identity between the protein of interest and the known structure (template. When no homologs can be found in the protein structure database (PDB, the user would need to rerun the same search at regular intervals in order to make timely use of a template once it becomes available. Results PDBalert is a web-based automatic system that sends an email alert as soon as a structure with homology to a protein in the user's watch list is released to the PDB database or appears among the sequences on hold. The mail contains links to the search results and to an automatically generated 3D homology model. The sequence search is performed with the same software as used by the very sensitive and reliable remote homology detection server HHpred, which is based on pairwise comparison of Hidden Markov models. Conclusion PDBalert will accelerate the information flow from the PDB database to all those who can profit from the newly released protein structures for predicting the 3D structure or function of their proteins of interest.

  17. Recent progress in AMS measurement of 182Hf at the CIAE

    Institute of Scientific and Technical Information of China (English)

    LI Zhen-Yu; LI Heng; WU Shao-Yong; YUAN Jian; JIANG Shan; HE Ming; DONG Ke-Jun; HE Guo-Zhu; LI Chao-Li; HE Xian-Wen; ZHANG Wei; HU Hao; ZHENG Guo-Wen


    In order to improve the accuracy of accelerator mass spectrometry (AMS) measurement for 182Hf/180Hf,a series of measurements have been taken in the AMS laboratory at the China Institute of Atomic Energy (CIAE).The major ones include the instantaneous monitoring of 180HfF-5current,testing the stability of transmission,the alternate measurements of an unknown sample and standard,and the origin identification and minimization of background 182W.The experimental details and the improvement in the measurement accuracy,as well as some useful suggestions for better satisfying the requirements of certain practical applications,are presented in this paper.

  18. Structural and thermal properties of Cu-Hf-Ti bulk amorphous alloys (United States)

    Rontó, V.; Nagy, E.; Svéda, M.; Roósz, A.; Tranta, F.


    Cu-Hf-Ti amorphous alloys are high strength and wear resistant materials. Master alloys of Cu57.5Hf27.5Ti15 and Cu57.5Hf25Ti17.5 ternary alloys have been prepared by arc melting, and wedge and rod shaped samples have been cast by centrifugal casting. Liquidus and solidus temperatures of the alloys were determined by DTA. The fully amorphous size was determined by X-ray diffraction. Thermodynamic properties of the amorphous alloys were studied by DSC measurements and Kissinger analyses were performed.

  19. Artificial Ionization and UHF Radar Response Associated with HF Frequencies near Electron Gyro-Harmonics (Invited) (United States)

    Watkins, B. J.; Fallen, C. T.; Secan, J. A.


    We present new results from O-mode ionospheric heating experiments at the HAARP facility in Alaska to demonstrate that the magnitude of artificial ionization production is critically dependent on the choice of HF frequency near gyro-harmonics. For O-mode heating in the lower F-region ionosphere, typically about 200 km altitude, artificial ionization enhancements are observed in the lower ionosphere (about 150 - 220 km) and also in the topside ionosphere above about 500 km. Lower ionosphere density enhancements are inferred from HF-enhanced ion and plasma-line signals observed with UHF radar. Upper ionospheric density enhancements have been observed with TEC (total electron content) experiments by monitoring satellite radio beacons where signal paths traverse the HF-modified ionosphere. Both density enhancements and corresponding upward plasma fluxes have also been observed in the upper ionosphere via in-situ satellite observations. The data presented focus mainly on observations near the third and fourth gyro-harmonics. The specific values of the height-dependent gyro-harmonics have been computed from a magnetic model of the field line through the HF heated volume. Experiments with several closely spaced HF frequencies around the gyro-harmonic frequency region show that the magnitude of the lower-ionosphere artificial ionization production maximizes for HF frequencies about 1.0 - 1.5 MHz above the gyro-harmonic frequency. The response is progressively larger as the HF frequency is increased in the frequency region near the gyro-harmonics. For HF frequencies that are initially greater than the gyro-harmonic value the UHF radar scattering cross-section is relatively small, and non-existent or very weak signals are observed; as the signal returns drop in altitude due to density enhancements the HF interaction region passes through lower altitudes where the HF frequency is less than the gyro-harmonic value, for these conditions the radar scattering cross-section is

  20. Graphene contacts to a HfSe2/SnS2 heterostructure (United States)

    Su, Shanshan; Das, Protik; Ge, Supeng; Lake, Roger K.


    Two-dimensional (2D) heterostructures and all-2D contacts are of high interest for electronic device applications, and the SnS2/HfSe2 bilayer heterostructure with graphene contacts has some unique, advantageous properties. The SnS2/HfSe2 heterostructure is interesting because of the strong intermixing of the two conduction bands and the large work function of the SnS2. The band lineup of the well separated materials indicates a type II heterostructure, but the conduction band minimum of the SnS2/HfSe2 bilayer is a coherent superposition of the orbitals from the two layers with a spectral weight of 60% on the SnS2 and 40% on the HfSe2 for AA stacking. These relative weights can be either increased or reversed by an applied vertical field. A 3 ×3 supercell of graphene and a 2 ×2 supercell of SnS2/HfSe2 have a lattice mismatch of 0.1% and both the SnS2/HfSe2 conduction band at M and the graphene Dirac point at K are zone-folded to Γ . Placing graphene on the SnS2/HfSe2 bilayer results in large n-type charge transfer doping of the SnS2/HfSe2 bilayer, on the order of 1013/cm2, and the charge transfer is accompanied by a negative Schottky barrier contact for electron injection from the graphene into the SnS2/HfSe2 bilayer conduction band. Binding energies and the anti-crossing gaps of the graphene and the SnS2/HfSe2 electronic bands both show that the coupling of graphene to the HfSe2 layer is significantly larger than its coupling to the SnS2 layer. A tunneling Hamiltonian estimate of the contact resistance of the graphene to the SnS2/HfSe2 heterostructure predicts an excellent low-resistance contact.

  1. Control of photoassociation reaction F+H→HF with ultrashort laser pulse

    Institute of Scientific and Technical Information of China (English)


    The laser-induced vibrational state-selectivity of product HF in photoassociation reaction H+F→HF is theoretically investigated by using the time-dependent quantum wave packet method. The population transfer process from the continuum state down to the bound vibrational states can be controlled by the driving laser. The effects of laser pulse parameters and the initial momentum of the two collision atoms on the vibrational population of the product HF are discussed in detail. Photodissociation accompanied with the photoassociation process is also described.

  2. [18F]Fluoride recovery via gaseous [18F]HF

    DEFF Research Database (Denmark)

    Mathiessen, Bente; Jensen, Mikael; Zhuravlev, Fedor


    Acidification of target water with H2SO4 in a specially constructed glassy carbon/polyethylene apparatus allowed for recovery of up to 82% of [18F]fluoride as [18F]HF gas. The [18F]HF distillate was found to be acid-free but moist; when passed through a solution of tBuPh2SiOTf, it yielded [18F......]tBuPh2SiF. The multivariate design of experiment showed that the key to high yield of [18F]HF was the efficient degassing of the reaction mixture....

  3. The role of phosphates for the Lu-Hf chronology of meteorites (United States)

    Debaille, Vinciane; Van Orman, James; Yin, Qing-Zhu; Amelin, Yuri


    The 176Lu-176Hf isotopic system is widely used for dating and tracing cosmochemical and geological processes, but still suffers from two uncertainties. First, Lu-Hf isochrons for some early Solar System materials have excess slope of unknown origin that should not be expected for meteorites with ages precisely determined with other isotopic chronometers. This observation translates to an apparent Lu decay constant higher than the one calculated by comparing ages obtained with various dating methods on terrestrial samples. Second, unlike the well constrained Sm/Nd value (to within 2%) for the chondritic uniform reservoir (CHUR), the Lu/Hf ratios in chondrites vary up to 18% when considering all chondrites, adding uncertainty to the Lu/Hf CHUR value. In order to better understand the Lu-Hf systematics of chondrites, we analyzed mineral fractions from the Richardton H5 chondrite to construct an internal Lu-Hf isochron, and set up a numerical model to investigate the effect of preferential diffusion of Lu compared to Hf from phosphate, the phase with the highest Lu-Hf ratio in chondrites, to other minerals. The isochron yields an age of 4647 ± 210 million years (Myr) using the accepted 176Lu decay constant of 1.867 ± 0.008 ×10-11yr-1. Combining this study with the phosphate fractions measured in a previous study yields a slope of 0.08855 ± 0.00072, translating to a 176Lu decay constant of 1.862 ± 0.016 ×10-11yr-1 using the Pb-Pb age previously obtained, in agreement with the accepted value. The large variation of the Lu/Hf phosphates combined with observations in the present study identify phosphates as the key in perturbing Lu-Hf dating and generating the isochron slope discrepancy. This is critical as apatite has substantially higher diffusion rates of rare earth elements than most silicate minerals that comprise stony meteorites. Results of numerical modeling depending of temperature peak, size of the grains and duration of the metamorphic event, show that

  4. Interaction of La2O3 capping layers with HfO2 gate dielectrics (United States)

    Copel, M.; Guha, S.; Bojarczuk, N.; Cartier, E.; Narayanan, V.; Paruchuri, V.


    We report the effect of La2O3 capping layers on HfO2/SiO2/Si dielectrics, proposed for use in threshold voltage tuning of field effect transistors. Depth profiling with medium energy ion scattering shows that an initial surface layer of La2O3 diffuses through the HfO2 at elevated temperatures, ultimately converting some of the thin interfacial SiO2 into a silicate. Core-level photoemission measurements indicate that the additional band-bending induced by the La2O3 only appears after diffusion, and the added charge resides between the HfO2 and the substrate.

  5. A first-principles high-pressure study of Hf2PX (X=B, C, N) (United States)

    Li, Hui; Luo, Zhili; Liu, Zhe; Sun, Guodong; Wang, Zhenjun


    New members of MAX family Hf2PX (X=B, C, N) were studied by first-principles calculations under pressure range of 0-100 GPa. Their structural, elastic and electronic properties were reported. The results show that they are energetically stable at zero pressure and mechanically stable under pressure range from 0 to 100 GPa. It reveals that Hf2PB>Hf2PC>Hf2PN for the structural parameters of a and V, and Hf2PBpressure environments.

  6. Fabrication and characteristics of high-K HfO2 gate dielectrics on n-germanium

    Institute of Scientific and Technical Information of China (English)

    Han De-Dong; Kang Jin-Feng; Liu Xiao-Yan; Sun Lei; Luo Hao; Han Ru-Qi


    This paper reports that the high-K HfO2 gate dielectrics are fabricated on n-germanium substrates by sputtering Hf on Ge and following by a furnace annealing. The impacts of sputtering ambient, annealing ambient and annealing temperature on the electrical properties of high-K HfO2 gate dielectrics on germanium substrates are investigated.Experimental results indicate that high-K HfO2 gate dielectrics on germanium substrates with good electrical characteristics are obtained, the electrical properties of high-K HfO2 gate dielectrics is strongly correlated with sputtering ambient, annealing ambient and annealing temperature.

  7. Transparent restructuring of pointer-linked data structures

    NARCIS (Netherlands)

    Spek, Harmen Laurens Anne van der


    In contemporary computer systems, data layout has great influence on performance. Traditionally, automatic restructuring in type-unsafe languages has been hard, especially in the presence of pointers. In this thesis, the foundations are laid for successful restructuring of pointer linked data struct

  8. Low modulus Ti-Nb-Hf alloy for biomedical applications. (United States)

    González, M; Peña, J; Gil, F J; Manero, J M


    β-Type titanium alloys with a low elastic modulus are a potential strategy to reduce stress shielding effect and to enhance bone remodeling in implants used to substitute failed hard tissue. For biomaterial application, investigation on the mechanical behavior, the corrosion resistance and the cell response is required. The new Ti25Nb16Hf alloy was studied before and after 95% cold rolling (95% C.R.). The mechanical properties were determined by tensile testing and its corrosion behavior was analyzed by potentiostatic equipment in Hank's solution at 37°C. The cell response was studied by means of cytotoxicity evaluation, cell adhesion and proliferation measurements. The stress-strain curves showed the lowest elastic modulus (42GPa) in the cold worked alloy and high tensile strength, similar to that of Ti6Al4V. The new alloy exhibited better corrosion resistance in terms of open circuit potential (EOCP), but was similar in terms of corrosion current density (iCORR) compared to Ti grade II. Cytotoxicity studies revealed that the chemical composition of the alloy does not induce cytotoxic activity. Cell studies in the new alloy showed a lower adhesion and a higher proliferation compared to Ti grade II presenting, therefore, mechanical features similar to those of human cortical bone and, simultaneously, a good cell response.

  9. Anomalous phenomena on HF radio paths during geomagnetic disturbances (United States)

    Blagoveshchenskii, D. V.


    We analyze ionospheric oblique sounding data on three high-latitude and one high-latitude-midlatitude HF radio paths for February 15 and 16, 2014, when two substorms and one magnetic storm occurred. We investigate cases of anomalous propagation of signals: their reflection from sporadic layer Es, lateral reflections, type "M" or "N" modes, the presence of traveling ionospheric disturbances, and the diffusivity of signals and triplets. The most significant results are the following. In geomagnetically undisturbed times, sporadic Es-layers with reduced maximum observed frequencies (MOF Es) on three high-latitude paths were observed in both days. The values of MOF Es during disturbances are large, which leads to the screening of other oblique sounding signals reflected from the ionosphere. On all four paths, the most frequently traveling ionospheric disturbances due to the terminator were observed in quiet hours from 03:00 to 15:00 UT on the first day and from 06:00 to 13:00 UT on the second day of the experiment. In addition, both the sunset terminator and the magnetic storm on the high-latitude-mid-latitude path were found to generate traveling ionospheric disturbances jointly. No such phenomenon was found on high-latitude paths.

  10. Large ionospheric disturbances produced by the HAARP HF facility (United States)

    Bernhardt, Paul A.; Siefring, Carl L.; Briczinski, Stanley J.; McCarrick, Mike; Michell, Robert G.


    The enormous transmitter power, fully programmable antenna array, and agile frequency generation of the High Frequency Active Auroral Research Program (HAARP) facility in Alaska have allowed the production of unprecedented disturbances in the ionosphere. Using both pencil beams and conical (or twisted) beam transmissions, artificial ionization clouds have been generated near the second, third, fourth, and sixth harmonics of the electron gyrofrequency. The conical beam has been used to sustain these clouds for up to 5 h as opposed to less than 30 min durations produced using pencil beams. The largest density plasma clouds have been produced at the highest harmonic transmissions. Satellite radio transmissions at 253 MHz from the National Research Laboratory TACSat4 communications experiment have been severely disturbed by propagating through artificial plasma regions. The scintillation levels for UHF waves passing through artificial ionization clouds from HAARP are typically 16 dB. This is much larger than previously reported scintillations at other HF facilities which have been limited to 3 dB or less. The goals of future HAARP experiments should be to build on these discoveries to sustain plasma densities larger than that of the background ionosphere for use as ionospheric reflectors of radio signals.

  11. Equatorial ionospheric disturbance observed through a transequatorial HF propagation experiment

    Directory of Open Access Journals (Sweden)

    T. Maruyama


    Full Text Available A transequatorial radio-wave propagation experiment at shortwave frequencies (HF-TEP was done between Shepparton, Australia, and Oarai, Japan, using the radio broadcasting signals of Radio Australia. The receiving facility at Oarai was capable of direction finding based on the MUSIC (Multiple Signal Classification algorithm. The results were plotted in azimuth-time diagrams (AT plots. During the daytime, the propagation path was close to the great circle connecting Shepparton and Oarai, thus forming a single line in the AT plots. After sunset, off-great-circle paths, or satellite traces in the AT plot, often appeared abruptly to the west and gradually returned to the great circle direction. However, there were very few signals across the great circle to the east. The off-great-circle propagation was very similar to that previously reported and was attributed to reflection by an ionospheric structure near the equator. From the rate of change in the direction, we estimated the drift velocity of the structure to range mostly from 100 to 300 m/s eastward. Multiple instances of off-great-circle propagation with a quasi-periodicity were often observed and their spatial distance in the east-west direction was within the range of large-scale traveling ionospheric disturbances (LS-TIDs. Off-great-circle propagation events were frequently observed in the equinox seasons. Because there were many morphological similarities, the events were attributed to the onset of equatorial plasma bubbles.

  12. Automatic identification and normalization of dosage forms in drug monographs

    Directory of Open Access Journals (Sweden)

    Li Jiao


    Full Text Available Abstract Background Each day, millions of health consumers seek drug-related information on the Web. Despite some efforts in linking related resources, drug information is largely scattered in a wide variety of websites of different quality and credibility. Methods As a step toward providing users with integrated access to multiple trustworthy drug resources, we aim to develop a method capable of identifying drug's dosage form information in addition to drug name recognition. We developed rules and patterns for identifying dosage forms from different sections of full-text drug monographs, and subsequently normalized them to standardized RxNorm dosage forms. Results Our method represents a significant improvement compared with a baseline lookup approach, achieving overall macro-averaged Precision of 80%, Recall of 98%, and F-Measure of 85%. Conclusions We successfully developed an automatic approach for drug dosage form identification, which is critical for building links between different drug-related resources.

  13. Automatically Identifying Morphological Relations in = Machine-Readable Dictionaries

    CERN Document Server

    Pentheroudakis, J; Pentheroudakis, Joseph; Vanderwende, Lucy


    We describe an automated method for identifying classes of morphologically related words in an on-line dictionary, and for linking individual senses in the derived form to one or more senses in the base form by means of morphological relation attributes. We also present an algorithm for computing a score reflecting the system=92s certainty in these derivational links; this computation relies on the content of semantic relations associated with each sense, which are extracted automatically by parsing each sense definition and subjecting the parse structure to automated semantic analysis. By processing the entire set of headwords in the dictionary in this fashion we create a large set of directed derivational graphs, which can then be accessed by other components in our broad-coverage NLP system. Spurious or unlikely derivations are not discarded, but are rather added to the dictionary and assigned a negative score; this allows the system to handle non-standard uses of these forms.

  14. Formation of Al2O3-HfO2 Eutectic EBC Film on Silicon Carbide Substrate

    Directory of Open Access Journals (Sweden)

    Kyosuke Seya


    Full Text Available The formation mechanism of Al2O3-HfO2 eutectic structure, the preparation method, and the formation mechanism of the eutectic EBC layer on the silicon carbide substrate are summarized. Al2O3-HfO2 eutectic EBC film is prepared by optical zone melting method on the silicon carbide substrate. At high temperature, a small amount of silicon carbide decomposed into silicon and carbon. The components of Al2O3 and HfO2 in molten phase also react with the free carbon. The Al2O3 phase reacts with free carbon and vapor species of AlO phase is formed. The composition of the molten phase becomes HfO2 rich from the eutectic composition. HfO2 phase also reacts with the free carbon and HfC phase is formed on the silicon carbide substrate; then a high density intermediate layer is formed. The adhesion between the intermediate layer and the substrate is excellent by an anchor effect. When the solidification process finished before all of HfO2 phase is reduced to HfC phase, HfC-HfO2 functionally graded layer is formed on the silicon carbide substrate and the Al2O3-HfO2 eutectic structure grows from the top of the intermediate layer.

  15. Effects of Modified Precursor Solution on Microstructure of (Y,Yb)MnO3/HfO2/Si (United States)

    Suzuki, Kazuyuki; Kato, Kazumi


    Ferroelectric/insulator/silicon structures were prepared using (Y,Yb)MnO3 films as ferroelectrics and HfO2 thin films as insulators through alkoxy-derived precursor solutions. The HfO2 solution was chemically modified in order to decrease the number of heating cycles required. The HfO2 films prepared using a partially hydrolyzed alkoxide solution had a uniform structure. From the results of measurements of the roughness level and refractive index of the HfO2 films, the partial hydrolysis of the HfO2 solution was found to be effective for the formation of a uniform microstructure in a thin insulator film. (Y,Yb)MnO3/HfO2/Si structures were constructed using the resultant HfO2 thin films prepared using the modified solutions.

  16. Effects of C and Hf concentration on phase relations and microstructure of a wrought powder-metallurgy superalloy (United States)

    Miner, R. V., Jr.


    NASA IIB-11, a candidate alloy for advanced temperature turbine engine disks, and four modifications with varying C and Hf concentrations were produced from prealloyed powders. Several notable effects of C and Hf concentration in the alloys were observed. Both the amount of the gamma-prime phase and its solvus temperature increased with decreasing C, but only the gamma-prime solvus was affected by Hf, increasing with increasing Hf. Hf also promoted a cellular gamma-prime precipitation. Hf was, however, about equally distributed between gamma-prime and gamma. Hf and C both affected the carbides formed. Increasing both promoted formation of an MC relative to that of an M6C.

  17. The Modulation of Ionospheric Alfvén Resonator on Heating HF Waves and the Doppler Effect

    Institute of Scientific and Technical Information of China (English)

    Ni Bin-bin; Zhao Zheng-yu; Xie Shu-guo


    Abstract: The propagation of HF waves in IAR can produce many nonlinear effects, including the modulation effect of IAR on HF waves and the Doppler effect. To start with the dependence of the ionospheric electron temperature variaof the modulation effect and lucubrate possible reasons for the field can have an observable modulation effect on HF waves while its mechanism is quite different from that of Schumann resonant field on HF waves. The depth of modulation of IAR field, which directly inspires the formation of cross-spectrum between ULF waves and HF waves and results in spectral peaks at some gyro-frequencies of IAR. With respect to the Doppler effect during the propagation of HF waves in IAR, it is mainly caused by the motion of the high-speed flyer and the drifting electrons and the frequency shift from the phase variation of the reflected waves can be neglected when the frequency of HF incident wave is high enough.

  18. Autoclass: An automatic classification system (United States)

    Stutz, John; Cheeseman, Peter; Hanson, Robin


    The task of inferring a set of classes and class descriptions most likely to explain a given data set can be placed on a firm theoretical foundation using Bayesian statistics. Within this framework, and using various mathematical and algorithmic approximations, the AutoClass System searches for the most probable classifications, automatically choosing the number of classes and complexity of class descriptions. A simpler version of AutoClass has been applied to many large real data sets, has discovered new independently-verified phenomena, and has been released as a robust software package. Recent extensions allow attributes to be selectively correlated within particular classes, and allow classes to inherit, or share, model parameters through a class hierarchy. The mathematical foundations of AutoClass are summarized.

  19. Automatic quantification of iris color

    DEFF Research Database (Denmark)

    Christoffersen, S.; Harder, Stine; Andersen, J. D.


    An automatic algorithm to quantify the eye colour and structural information from standard hi-resolution photos of the human iris has been developed. Initially, the major structures in the eye region are identified including the pupil, iris, sclera, and eyelashes. Based on this segmentation...... regions. The result is a blue-brown ratio for each eye. Furthermore, an image clustering approach has been used with promising results. The approach is based on using a sparse dictionary of feature vectors learned from a training set of iris regions. The feature vectors contain both local structural...... is completely data driven and it can divide a group of eye images into classes based on structure, colour or a combination of the two. The methods have been tested on a large set of photos with promising results....

  20. Automatic Image Interpolation Using Homography

    Directory of Open Access Journals (Sweden)

    Chi-Tsung Liu


    Full Text Available While taking photographs, we often face the problem that unwanted foreground objects (e.g., vehicles, signs, and pedestrians occlude the main subject(s. We propose to apply image interpolation (also known as inpainting techniques to remove unwanted objects in the photographs and to automatically patch the vacancy after the unwanted objects are removed. When given only a single image, if the information loss after the unwanted objects in images being removed is too great, the patching results are usually unsatisfactory. The proposed inpainting techniques employ the homographic constraints in geometry to incorporate multiple images taken from different viewpoints. Our experiment results showed that the proposed techniques could effectively reduce process in searching for potential patches from multiple input images and decide the best patches for the missing regions.

  1. Automatic validation of numerical solutions

    DEFF Research Database (Denmark)

    Stauning, Ole


    This thesis is concerned with ``Automatic Validation of Numerical Solutions''. The basic theory of interval analysis and self-validating methods is introduced. The mean value enclosure is applied to discrete mappings for obtaining narrow enclosures of the iterates when applying these mappings...... is the possiblility to combine the three methods in an extremely flexible way. We examine some applications where this flexibility is very useful. A method for Taylor expanding solutions of ordinary differential equations is presented, and a method for obtaining interval enclosures of the truncation errors incurred...... with intervals as initial values. A modification of the mean value enclosure of discrete mappings is considered, namely the extended mean value enclosure which in most cases leads to even better enclosures. These methods have previously been described in connection with discretizing solutions of ordinary...

  2. Automatic summarising factors and directions

    CERN Document Server

    Jones, K S


    This position paper suggests that progress with automatic summarising demands a better research methodology and a carefully focussed research strategy. In order to develop effective procedures it is necessary to identify and respond to the context factors, i.e. input, purpose, and output factors, that bear on summarising and its evaluation. The paper analyses and illustrates these factors and their implications for evaluation. It then argues that this analysis, together with the state of the art and the intrinsic difficulty of summarising, imply a nearer-term strategy concentrating on shallow, but not surface, text analysis and on indicative summarising. This is illustrated with current work, from which a potentially productive research programme can be developed.

  3. Automatic Network Reconstruction using ASP

    CERN Document Server

    Ostrowski, Max; Durzinsky, Markus; Marwan, Wolfgang; Wagler, Annegret


    Building biological models by inferring functional dependencies from experimental data is an im- portant issue in Molecular Biology. To relieve the biologist from this traditionally manual process, various approaches have been proposed to increase the degree of automation. However, available ap- proaches often yield a single model only, rely on specific assumptions, and/or use dedicated, heuris- tic algorithms that are intolerant to changing circumstances or requirements in the view of the rapid progress made in Biotechnology. Our aim is to provide a declarative solution to the problem by ap- peal to Answer Set Programming (ASP) overcoming these difficulties. We build upon an existing approach to Automatic Network Reconstruction proposed by part of the authors. This approach has firm mathematical foundations and is well suited for ASP due to its combinatorial flavor providing a characterization of all models explaining a set of experiments. The usage of ASP has several ben- efits over the existing heuristic a...

  4. Automatic orientation correction for radiographs (United States)

    Luo, Hui; Luo, Jiebo; Wang, Xiaohui


    In picture archiving and communications systems (PACS), images need to be displayed in standardized ways for radiologists' interpretations. However, for most radiographs acquired by computed radiography (CR), digital radiography (DR), or digitized films, the image orientation is undetermined because of the variation of examination conditions and patient situations. To address this problem, an automatic orientation correction method is presented. It first detects the most indicative region for orientation in a radiograph, and then extracts a set of low-level visual features sensitive to rotation from the region. Based on these features, a trained classifier based on a support vector machine is employed to recognize the correct orientation of the radiograph and reorient it to a desired position. A large-scale experiment has been conducted on more than 12,000 radiographs covering a large variety of body parts and projections to validate the method. The overall performance is quite promising, with the success rate of orientation correction reaching 95.2%.

  5. Ferroelectric modulation of terahertz waves with graphene/ultrathin-Si:HfO2/Si structures (United States)

    Jiang, Ran; Han, Zuyin; Sun, Weideng; Du, Xianghao; Wu, Zhengran; Jung, Hyung-Suk


    Ferroelectric-field-effect-tunable modulation of terahertz waves in graphene/Si:HfO2/Si stack structure was observed. The modulation shows distinct behaviors when the samples under different gate polarities. At a negative voltage, a transmission modulation depth up to ˜74% was present without depending on the photo illumination power, whereas, at a positive voltage, the modulation of Thz wave shows dependence on the illumination power, which is ascribed to the creation/elimination of an extra barrier in Si layer in response to the polarization in the ferroelectric Si:HfO2 layer. Considering the good compatibility of HfO2 on Si-based semiconductor process, the ferroelectricity layer of Si:HfO2 may open up an avenue for the tunable modulation of Thz wave.

  6. Modulation of auroral electrojet currents using dual HF beams with ELF phase offset (United States)

    Golkowski, M.; Cohen, M.; Moore, R. C.


    The modulation of naturally occuring ionospheric currents with high power radio waves in the high frequency (HF, 3-10 MHz) band is a well known technique for generation of extremely low frequency (ELF, 3-3000 Hz) and very low frequency (VLF, 3-30 kHz) waves. We use the heating facility of the High Frequency Active Auroral Research Program (HAARP) to investigate the effect of using dual HF beams with an ELF/VLF phase offset between the modulation waveforms. Experiments with offset HF beams confirm the model of independent ELF/VLF sources. Experiments with co-located HF beams exhibit interaction between the first and second harmonics of the modulated tones when square and sine wave modulation waveforms are employed. Using ELF/VLF phase offsets for co-loacted beams is also shown to be a potential diagnostic for the D-region ionospheric profile.

  7. Hf diffusion in dilute Fe-free Zr(Nb) alloys

    Energy Technology Data Exchange (ETDEWEB)

    Zou, H.; Hood, G.M.; Roy, J.A.; Schultz, R.J. [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.; Jackman, J.A. [Canada Centre for Mineral and Energy Technology, Ottawa, ON (Canada)


    Hf diffusion coefficients D have been measured in the {alpha}-phase of the Fe-free binary alloys Zr-1.0 at.% Nb and Zr-2.5 at.% Nb in the temperature range 830-1100 K. The D values for the two alloys are essentially indistinguishable and little different from extant Hf diffusion coefficients measured in Fe-free polycrystalline {alpha}-Zr. The temperature dependence of D in the alloys is characteristic of intrinsic {alpha}-Zr bulk behaviour. The present hf D values are much lower than corresponding values measured in commercial Zr-2.5 Nb. The difference is attributable to the influence of solid-solution Fe. In addition, the absence of a strong enhancement of Hf diffusion in {alpha}-Zr by Nb suggests that intrinsic Nb diffusion in {alpha}-Zr may not be controlled by a normal vacancy mechanism. (author).

  8. HF183/BFDrev and HumM2 qPCR data (United States)

    U.S. Environmental Protection Agency — Concentration estimates for HF183/BFDrev and HumM2 qPCR genetic markers in raw sewage collected from 54 geographic locations across the United States. This dataset...

  9. Phase Transformation and Thermal Stability of Aged Ti-Ni-Hf High Temperature Shape Memory Alloys

    Institute of Scientific and Technical Information of China (English)

    Xianglong MENG; Wei CAI; K.T.Lau; L.M.Zhou; Liancheng ZHAO


    The use of Ni-rich TiNiHf alloys as high temperature shape memory alloys(SMAs)through aging has been presented. For Ni-rich Ti80-xNixHf20 alloys, their phase transformation temperatures are averagely increased more than 100 K by aging at 823 K for 2 h. Especially for the alloys with Ni-content of 50.4 at. pct and 50.6 at. pct, their martensitic transformation start temperatures(Ms)are more than 473 K after aging. TEM observation confirmed that some fine particles precipitate from the matrix during aging. The aged Ni-rich TiNiHf SMAs show the better thermal stability of phase transformation temperatures than the solutiontreated TiNiHf alloys. The fine particles precipitated during aging should be responsible for the increase of phase transformation temperatures and its high stability.

  10. Luminescence and scintillation properties of Rb2HfCl6 crystals (United States)

    Saeki, Keiichiro; Wakai, Yuki; Fujimoto, Yutaka; Koshimizu, Masanori; Yanagida, Takayuki; Nakauchi, Daisuke; Asai, Keisuke


    We developed a scintillator based on a Rb2HfCl6 crystal as a ternary halide crystal with intrinsic luminescence. In the photoluminescence spectra, two emission bands are observed at 383 and 434 nm. The 434 nm emission band for Rb2HfCl6 may be attributed to [HfCl6]2- complex ion or [ZrCl6]2- impurity, since the Rb2HfCl6 contained Zr as impurity at 0.62 mol %. The radioluminescence band is observed at 420 nm and can be attributed to the same origin as the photoluminescence band at 434 nm. The scintillation decay-time constants were 0.84 and 5.4 µs. The light yield was estimated to be 24,100 photons/MeV.

  11. Development of Hf(4+)-immobilized polydopamine-coated magnetic graphene for highly selective enrichment of phosphopeptides. (United States)

    Lin, Haizhu; Deng, Chunhui


    In this work, we first designed and synthesized an IMAC material with Hf(4+) immobilized on polydopamine-coated magnetic graphene and applied it to phosphopeptides enrichment successfully. The newly prepared material gathered the advantages of large specific surface area of graphene, good hydrophilicity and biocompatibility of polydopamine and superparamagnetism of Fe3O4. We investigated the performance of Hf(4+)-immobilized polydopamine-coated magnetic graphene (denoted as magG@PDA-Hf(4+)) in phosphopeptides enrichment and the results showed high selectivity and sensitivity of the new material. Finally, we successfully applied magG@PDA-Hf(4+) to phosphopeptides enrichment from non-fat milk digests and human serum, further demonstrating excellent performance of this new material in phosphopeptides enrichment. Copyright © 2015 Elsevier B.V. All rights reserved.

  12. Intergrowth Structure in U- and Hf-Bearing Pyrochlore and Zirconolite: TEM Investigation

    Energy Technology Data Exchange (ETDEWEB)

    Xu, H; Wang, Y; Zhao, P; Bourcier, W L; Van Konynenburg, R; Shaw, H F


    Transmission electron microscopy results from a sintered ceramics with stoichiometry of Ca(U{sub 0.5}Ce{sub 0.25}Hf{sub 0.25})Ti{sub 2}O{sub 7} show the material contains both pyrochlore and zirconolite phases and structural intergrowth of zirconolite lamellae within pyrochlore. (001) plane of zirconolite is parallel to (111) plane of pyrochlore because of their structural similarities. The pyrochlore is relatively rich in U, Ce, and Ca with respect to the coexisting zirconolite. Average compositions for the coexisting pyrochlore and zirconolite produced by sintering at 1350 C are (Ca{sub 1.01}Ce{sub 0.13}{sup 3+}Ce{sub 0.19}{sup 4+}U{sub 0.52}Hf{sub 0.18})(Ti{sub 1.95}Hf{sub 0.05})O{sub 7} (with U/(U+Hf) (in the AB sites) = 0.74) and (Ca{sub 0.91}Ce{sub 0.09})(Ce{sub 0.08}{sup 3+}U{sub 0.26}Hf{sub 0.66}Ti{sub 0.01})Ti{sub 2.00}O{sub 7} (with U/(U+Hf) = 0.28) respectively. A single pyrochlore ((Ca,U,Hf){sub 2}Ti{sub 2}O{sub 7}) phase may be synthesized at 1350 C if the ratio of U/(U+Hf) is greater than 0.72, and a single zirconolite (Ca(Hf,U)Ti{sub 2}O{sub 7}) phase may be synthesized at 1350 C if the ratio of U/(U+Hf) is less than 0.28. An amorphous leached layer that is rich in Ti and Hf forms on the surface after the ceramics has been leached in pH 4 buffered solution. The thickness of the layer ranges from 5 nm to 15 nm. It is suggested that under these conditions, the leached layer functions as a protective layer, and reduces the leaching rate over time.

  13. Subduction Controls of Hf and Nd Isotopes in Lavas of the Aleutian Island Arc

    Energy Technology Data Exchange (ETDEWEB)

    Yogodzinski, Gene; Vervoort, Jeffery; Brown, Shaun Tyler; Gerseny, Megan


    The Hf and Nd isotopic compositions of 71 Quaternary lavas collected from locations along the full length of the Aleutian island arc are used to constrain the sources of Aleutian magmas and to provide insight into the geochemical behavior of Nd and Hf and related elements in the Aleutian subduction-magmatic system. Isotopic compositions of Aleutian lavas fall approximately at the center of, and form a trend parallel to, the terrestrial Hf-Nd isotopic array with {var_epsilon}{sub Hf} of +12.0 to +15.5 and {var_epsilon}{sub Nd} of +6.5 to +10.5. Basalts, andesites, and dacites within volcanic centers or in nearby volcanoes generally all have similar isotopic compositions, indicating that there is little measurable effect of crustal or other lithospheric assimilation within the volcanic plumbing systems of Aleutian volcanoes. Hafnium isotopic compositions have a clear pattern of along-arc increase that is continuous from the eastern-most locations near Cold Bay to Piip Seamount in the western-most part of the arc. This pattern is interpreted to reflect a westward decrease in the subducted sediment component present in Aleutian lavas, reflecting progressively lower rates of subduction westward as well as decreasing availability of trench sediment. Binary bulk mixing models (sediment + peridotite) demonstrate that 1-2% of the Hf in Aleutian lavas is derived from subducted sediment, indicating that Hf is mobilized out of the subducted sediment with an efficiency that is similar to that of Sr, Pb and Nd. Low published solubility for Hf and Nd in aqueous subduction fluids lead us to conclude that these elements are mobilized out of the subducted component and transferred to the mantle wedge as bulk sediment or as a silicate melt. Neodymium isotopes also generally increase from east to west, but the pattern is absent in the eastern third of the arc, where the sediment flux is high and increases from east to west, due to the presence of abundant terrigenous sediment in the

  14. Automatic cobb angle determination from radiographic images

    NARCIS (Netherlands)

    Sardjono, Tri Arief; Wilkinson, Michael H.F.; Veldhuizen, Albert G.; Ooijen, van Peter M.A.; Purnama, Ketut E.; Verkerke, Gijsbertus J.


    Study Design. Automatic measurement of Cobb angle in patients with scoliosis. Objective. To test the accuracy of an automatic Cobb angle determination method from frontal radiographical images. Summary of Background Data. Thirty-six frontal radiographical images of patients with scoliosis. Met

  15. Automatic Cobb Angle Determination From Radiographic Images

    NARCIS (Netherlands)

    Sardjono, Tri Arief; Wilkinson, Michael H. F.; Veldhuizen, Albert G.; van Ooijen, Peter M. A.; Purnama, Ketut E.; Verkerke, Gijsbertus J.


    Study Design. Automatic measurement of Cobb angle in patients with scoliosis. Objective. To test the accuracy of an automatic Cobb angle determination method from frontal radiographical images. Summary of Background Data. Thirty-six frontal radiographical images of patients with scoliosis. Methods.

  16. Automatic cobb angle determination from radiographic images

    NARCIS (Netherlands)

    Sardjono, Tri Arief; Wilkinson, Michael H.F.; Veldhuizen, Albert G.; van Ooijen, Peter M.A.; Purnama, Ketut E.; Verkerke, Gijsbertus Jacob


    Study Design. Automatic measurement of Cobb angle in patients with scoliosis. Objective. To test the accuracy of an automatic Cobb angle determination method from frontal radiographical images. Summary of Background Data. Thirty-six frontal radiographical images of patients with scoliosis. Methods.

  17. Generalization versus Contextualization in Automatic Evaluation (United States)

    Gawronski, Bertram; Rydell, Robert J.; Vervliet, Bram; De Houwer, Jan


    Research has shown that automatic evaluations can be highly robust and difficult to change, highly malleable and easy to change, and highly context dependent. We tested a representational account of these disparate findings, which specifies the conditions under which automatic evaluations reflect (a) initially acquired information, (b)…

  18. Solar Powered Automatic Shrimp Feeding System

    Directory of Open Access Journals (Sweden)

    Dindo T. Ani


    Full Text Available - Automatic system has brought many revolutions in the existing technologies. One among the technologies, which has greater developments, is the solar powered automatic shrimp feeding system. For instance, the solar power which is a renewable energy can be an alternative solution to energy crisis and basically reducing man power by using it in an automatic manner. The researchers believe an automatic shrimp feeding system may help solve problems on manual feeding operations. The project study aimed to design and develop a solar powered automatic shrimp feeding system. It specifically sought to prepare the design specifications of the project, to determine the methods of fabrication and assembly, and to test the response time of the automatic shrimp feeding system. The researchers designed and developed an automatic system which utilizes a 10 hour timer to be set in intervals preferred by the user and will undergo a continuous process. The magnetic contactor acts as a switch connected to the 10 hour timer which controls the activation or termination of electrical loads and powered by means of a solar panel outputting electrical power, and a rechargeable battery in electrical communication with the solar panel for storing the power. By undergoing through series of testing, the components of the modified system were proven functional and were operating within the desired output. It was recommended that the timer to be used should be tested to avoid malfunction and achieve the fully automatic system and that the system may be improved to handle changes in scope of the project.

  19. Microstructure and Elevated Temperature Properties of a Refractory TaNbHfZrTi Alloy (United States)


    alloy was prepared by vacuum arc melting of the equimolar mixtures of the corresponding elements. Titanium, zirconium, and hafnium were in the form of...AND ELEVATED TEMPERATURE PROPERTIES OF A REFRACTORY TaNbHfZrTi ALLOY (POSTPRINT) 5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER 5c. PROGRAM...6260-2. 14. ABSTRACT Compression properties of a refractory multicomponent alloy , Ta20Nb20Hf20Zr20Ti20, were determined in the temperature range

  20. The Instagram: A Novel Sounding Technique for Enhanced HF Propagation Advice (United States)


    The Instagram : A Novel Sounding Technique for Enhanced HF Propagation Advice Rod I. Barnes, G. Fred Earl Riverside Research Organization Rosslyn...low transmit powers, is reduced over conventional methods by up to three orders of magnitude leading to the term ‘ Instagram ’. The technique is...TYPE 3. DATES COVERED 00-00-2010 to 00-00-2010 4. TITLE AND SUBTITLE The Instagram : A Novel Sounding Technique for Enhanced HF Propagation Advice

  1. High-reflectivity HfO2/SiO2 ultraviolet mirrors. (United States)

    Torchio, Philippe; Gatto, Alexandre; Alvisi, Marco; Albrand, Gérard; Kaiser, Norbert; Amra, Claude


    High-reflectivity dense multilayer coatings were produced for the ultraviolet spectral region. Thin-film single layers and UV mirrors were deposited by ion plating and plasma ion-assisted deposition high-energetic technologies. Optical characterizations of HfO2 and SiO2 single layers are made. The optical constants obtained for these two materials are presented. HfO2 and SiO2 mirrors with a reflectance of approximately 99% near 250 nm are reported.

  2. Soft Magnetic Thin Films FeCoHfO for High-Frequency Noise Suppression Applications

    Institute of Scientific and Technical Information of China (English)

    LU Guang-Duo; ZHANG Huai-Wu; TANG Xiao-Li


    @@ A series of FeCoHfO films were fabricated by dc magnetron reactive sputtering at varying partial pressure of oxygen(Po2)from 0 to 11.7%,and the electrical and magnetic properties of films have been studied.It is shown that optimal Fe43.29 Co19.51 Hf7.49O29.71 films with desired properties can be obtained when the films were prepared under Po2 = 5.1%.

  3. Creation of Artificial Ionospheric Layers Using High-Power HF Waves (United States)


    Program ( HAARP ) transmitter in Gakona, Alaska. The HF- driven ionization process is initiated near the 2nd electron gyroharmonic at 220 km altitude in...the 3.6 MW High-Frequency Active Auroral Program ( HAARP ) transmitter in Gakona, Alaska. The HF-driven ionization process is initiated near the 2nd...Maine. USA. Copyright 2010 by the American Geophysical Union. 0094-8276/I0/2009GLO41895SO5.0O Research Program ( HAARP ) transmitter facility, however

  4. Characterization of Ionosphere Waveguide Propagation by Monitoring HAARP HF Transmissions in Antarctica (United States)



  5. Longitudinal Plasmoid in High-Speed Vortex Gas Flow Created by Capacity HF Discharge (United States)


    instrumentation will be used in this Project to study plasma and gas flow parameters, including new shadow device with excimer KrF laser, MW...vortex decay (attenuation) by HF plasma. The additional experiments with small helium jet injection prove the conclusion about vortex attenuation by a...equilibrium HF plasma. Plasma and airflow parameters are measured by different diagnostic instrumentation including shadow optical device with excimer

  6. Electron scattering cross sections with HF, OH, NH and CH molecules

    Energy Technology Data Exchange (ETDEWEB)

    Joshipura, K.N. [Sardar Patel Univ., Vallabh Vidyanagar (India). Dept. of Physics; Vinodkumar, M. [Sardar Patel Univ., Vallabh Vidyanagar (India). Dept. of Physics


    Total cross sections including elastic scattering, electronic excitation-ionisation and the dipole rotational excitation are calculated for electron impact on HF, OH, NH, and CH molecules. The additivity rules as well as single-centre expansion are employed for this purpose. A comparison was possible for the e-HF system only. Our results are expected to be good at intermediate to high energies (>50 eV). (orig.).

  7. Automatic Text Decomposition and Structuring. (United States)

    Salton, Gerard; And Others


    Text similarity measurements are used to determine relationships between natural-language texts and text excerpts. The resulting linked hypertext maps can be broken down into text segments and themes used to identify different text types and structures, leading to improved information access and utilization. Examples are provided for text…

  8. Ultrathin Hf0.5Zr0.5O2 Ferroelectric Films on Si. (United States)

    Chernikova, Anna; Kozodaev, Maksim; Markeev, Andrei; Negrov, Dmitrii; Spiridonov, Maksim; Zarubin, Sergei; Bak, Ohheum; Buragohain, Pratyush; Lu, Haidong; Suvorova, Elena; Gruverman, Alexei; Zenkevich, Andrei


    Because of their immense scalability and manufacturability potential, the HfO2-based ferroelectric films attract significant attention as strong candidates for application in ferroelectric memories and related electronic devices. Here, we report the ferroelectric behavior of ultrathin Hf0.5Zr0.5O2 films, with the thickness of just 2.5 nm, which makes them suitable for use in ferroelectric tunnel junctions, thereby further expanding the area of their practical application. Transmission electron microscopy and electron diffraction analysis of the films grown on highly doped Si substrates confirms formation of the fully crystalline non-centrosymmetric orthorhombic phase responsible for ferroelectricity in Hf0.5Zr0.5O2. Piezoresponse force microscopy and pulsed switching testing performed on the deposited top TiN electrodes provide further evidence of the ferroelectric behavior of the Hf0.5Zr0.5O2 films. The electronic band lineup at the top TiN/Hf0.5Zr0.5O2 interface and band bending at the adjacent n(+)-Si bottom layer attributed to the polarization charges in Hf0.5Zr0.5O2 have been determined using in situ X-ray photoelectron spectroscopy analysis. The obtained results represent a significant step toward the experimental implementation of Si-based ferroelectric tunnel junctions.

  9. ELF/VLF wave generation from the beating of two HF ionospheric heating sources (United States)

    Cohen, M. B.; Moore, R. C.; Golkowski, M.; Lehtinen, N. G.


    It is well established that Extremely Low Frequency (ELF, 0.3-3 kHz) and Very Low Frequency (VLF, 3-30 kHz) radio waves can be generated via modulated High Frequency (HF, 3-10 MHz) heating of the lower ionosphere (60-100 km). The ionospheric absorption of HF power modifies the conductivity of the lower ionosphere, which in the presence of natural currents such as the auroral electrojet, creates an `antenna in the sky.' We utilize a theoretical model of the HF to ELF/VLF conversion and the ELF/VLF propagation, and calculate the amplitudes of the generated ELF/VLF waves when two HF heating waves, separated by the ELF/VLF frequency, are transmitted from two adjacent locations. The resulting ELF/VLF radiation pattern exhibits a strong directional dependence (as much as 15 dB) that depends on the physical spacing of the two HF sources. This beat wave source can produce signals 10-20 dB stronger than those generated using amplitude modulation, particularly for frequencies greater than 5-10 kHz. We evaluate recent suggestions that beating two HF waves generates ELF/VLF waves in the F-region (>150 km), and conclude that those experimental results may have misinterpreted, and can be explained strictly by the much more well established D region mechanism.

  10. Superconductivity in HfTe5 across weak to strong topological insulator transition induced via pressures. (United States)

    Liu, Y; Long, Y J; Zhao, L X; Nie, S M; Zhang, S J; Weng, Y X; Jin, M L; Li, W M; Liu, Q Q; Long, Y W; Yu, R C; Gu, C Z; Sun, F; Yang, W G; Mao, H K; Feng, X L; Li, Q; Zheng, W T; Weng, H M; Dai, X; Fang, Z; Chen, G F; Jin, C Q


    Recently, theoretical studies show that layered HfTe5 is at the boundary of weak &strong topological insulator (TI) and might crossover to a Dirac semimetal state by changing lattice parameters. The topological properties of 3D stacked HfTe5 are expected hence to be sensitive to pressures tuning. Here, we report pressure induced phase evolution in both electronic &crystal structures for HfTe5 with a culmination of pressure induced superconductivity. Our experiments indicated that the temperature for anomaly resistance peak (Tp) due to Lifshitz transition decreases first before climbs up to a maximum with pressure while the Tp minimum corresponds to the transition from a weak TI to strong TI. The HfTe5 crystal becomes superconductive above ~5.5 GPa where the Tp reaches maximum. The highest superconducting transition temperature (Tc) around 5 K was achieved at 20 GPa. Crystal structure studies indicate that HfTe5 transforms from a Cmcm phase across a monoclinic C2/m phase then to a P-1 phase with increasing pressure. Based on transport, structure studies a comprehensive phase diagram of HfTe5 is constructed as function of pressure. The work provides valuable experimental insights into the evolution on how to proceed from a weak TI precursor across a strong TI to superconductors.

  11. Resistive switching characteristics of Pt/TaOx/HfNx structure and its performance improvement

    Directory of Open Access Journals (Sweden)

    Qigang Zhou


    Full Text Available The refractory transition metal nitride (TMN film Hafnium nitride (HfNx was successfully prepared on silicon-based substrates as bottom electrodes for resistive random access memory (RRAM cells in Pt (top/metal oxide/ HfNx (bottom sandwich structure. The reproducible resistive switching (RS characteristics of the memory cells were studied systematically for RRAM applications. The advantages of adopting HfNx instead of Pt as bottom electrode material were demonstrated, including the improvement of the low resistive state value, the RS endurance and the uniformity of RS parameters. The composition and chemical bonding states of the prepared HfNx was analyzed by X-ray photoelectron spectroscopy (XPS technique. The nitrogen content in the HfNx and the Gibbs free energy of the corresponding metal oxide formation has great influences on the RS properties. The oxygen reservoir ability and diffusion barrier effect of the HfNx play a key role in the RS performance improvement of the RRAM devices.

  12. First-principles calculations of adhesion, bonding and magnetism of the Fe/HfC interface

    Energy Technology Data Exchange (ETDEWEB)

    Si Abdelkader, H., E-mail: [Laboratoire d' Etude et Prediction des Materiaux, Unite de Recherche Materiaux et Energies Renouvelables. LEPM-URMER. Universite de Tlemcen, Tlemcen 13000 (Algeria); Faraoun, H.I. [Laboratoire d' Etude et Prediction des Materiaux, Unite de Recherche Materiaux et Energies Renouvelables. LEPM-URMER. Universite de Tlemcen, Tlemcen 13000 (Algeria)


    First-principles plane-wave pseudopotential calculations of the adhesion, bonding and magnetism of the interface between the ferromagnetic bcc Fe and non-magnetic HfC are performed. The work of adhesion for C- and Hf-site Fe/HfC interfaces is calculated. High adhesion at C-site interface is found and Fe-C polar covalent bonds are formed across the interface. The magnetic moments of Fe atoms at interface are increased in both interfaces. The effect of the magnetism on the electronic structure of Fe/HfC interface is also investigated. It is shown that the change in band of majority-spin leads to enhance the magnetic moment of Fe. - Highlights: Black-Right-Pointing-Pointer Adhesion, electronic and magnetism of Fe(110)/HfC(100) interface are studied. Black-Right-Pointing-Pointer High adhesion at C-site interface is found and Fe-C polar covalent bonds are formed across the interface. Black-Right-Pointing-Pointer The magnetic moments of interfacial Fe atoms are increased in both C-site and Hf-site interfaces.

  13. Hf, Zr, and REE partition coefficients between ilmenite and liquid - Implications for lunar petrogenesis (United States)

    Nakamura, Y.; Fujimaki, H.; Nakamura, N.; Tatsumoto, M.; Mckay, G. A.


    Partition coefficients (D) between ilmenite and coexisting liquid were determined under near-lunar conditions for Hf, Zr, and REE. Through isotope dilution analysis, ilmenite D values of 0.41 and 0.33 were obtained for Hf and Zr respectively, values significantly lower than those of ilmenite from a kimberlite megacryst. Partition coefficients of REE for the synthesized ilmenite are slightly smaller than those of ilmenite from the kimberlite megacryst, and the lunar (Lu) partition coefficient is 0.056. These results suggest that ilmenite was significant in the lunar-Hf evolution of lunar mare basalts. Using lunar and Hf D values for ilmenite, the Lu-Hf evolution of lunar cumulates and the coexisting magma was examined for various crystallization sequences. The Lu-Hf variation trend of most high-Ti mare basalts is explained by a small degree of partial cumulate melting, though a higher degree is required to explain the variation of very low-Ti basalts, green glass, and Apollo 12 low-Ti basalts. Apollo 15 low-Ti basalts may require chromite crystallization as well.

  14. Partition coefficients of Hf, Zr, and REE between phenocrysts and groundmasses (United States)

    Fujimaki, H.; Tatsumoto, M.; Aoki, K.-I.


    Partition coefficients of Hf, Zr, and REE between olivine, orthopyroxene, clinopyroxene, plagioclase, garnet, amphibole, ilmenite, phlogopite, and liquid are presented. Samples consist of megacrysts in kimberlite, phenocrysts in alkaline basalts, tholeiitic basalts and andesitic to dacitic rocks, and synthetic garnet and clinopyroxene in Hawaiian tholeiites. The Hf-Lu and Zr-Lu elemental fractionations are as large as the Lu-Sm or Lu-Nd fractionation. The Hf and Zr partition coefficients between mafic phenocrysts and liquids are smaller than the Lu partition coefficients, but are similar to the Nd or Sm partition coefficients. The Hf and Zr partition coefficients between ilmenite, phlogopite, and liquid are larger than the Lu partition coefficients for these minerals and their corresponding liquids. The Hf-Zr elemental fractionation does not occur except for extreme fractionation involving Zr-minerals and extremely low fO2. These data have an important bearing on chronological and petrogenetic tracer studies involving the Lu-Hf isotopic system.

  15. Power-Stepped HF Cross-Modulation Experiments: Simulations and Experimental Observations (United States)

    Greene, S.; Moore, R. C.


    High frequency (HF) cross modulation experiments are a well established means for probing the HF-modified characteristics of the D-region ionosphere. The interaction between the heating wave and the probing pulse depends on the ambient and modified conditions of the D-region ionosphere. Cross-modulation observations are employed as a measure of the HF-modified refractive index. We employ an optimized version of Fejer's method that we developed during previous experiments. Experiments were performed in March 2013 at the High Frequency Active Auroral Research Program (HAARP) observatory in Gakona, Alaska. During these experiments, the power of the HF heating signal incrementally increased in order to determine the dependence of cross-modulation on HF power. We found that a simple power law relationship does not hold at high power levels, similar to previous ELF/VLF wave generation experiments. In this paper, we critically compare these experimental observations with the predictions of a numerical ionospheric HF heating model and demonstrate close agreement.

  16. Influence of cointercalated HF on the electrochemical behavior of highly fluorinated graphite (United States)

    Nakajima, Tsuyoshi; Gupta, Vinay; Ohzawa, Yoshimi; Groult, Henri; Mazej, Zoran; Žemva, Boris

    Highly fluorinated graphite was prepared at room temperature using high oxidation state transition metal complex fluoride (K 2PdF 6, K 2MnF 6, K 2NiF 6 or KAgF 4) and elemental fluorine under pressure ((5.9-11.8) ×10 5 Pa) in anhydrous liquid HF (aHF). The composition of the fluorinated graphite samples ranged from C 1.1F to C 1.9F containing small amounts of HF. IR absorption spectra revealed that stage 1 phase of C xF contained several different phases with planar (sp 2) and puckered (sp 3) graphene layers. Electrochemical discharge of the fluorinated graphite showed that profile of discharge potential and discharge capacity varied depending on the amount of cointercalated HF. The C xF samples with less amounts of HF and HF 2δ- had relatively flat discharge potentials and large discharge capacities. The discharge capacity reached 500-600 mAh/g in 1 mol/dm 3 LiClO 4-propylene carbonate solution at 25 °C. Chemical diffusion coefficients of Li + ion in the intermediate discharge products were (4.4-13) ×10 -12 cm 2/s from impedance measurement.

  17. Experimental and numerical investigation of the refinement of Hf by EBM (United States)

    Donchev, Veliko; Vutova, Katia; Vassileva, Vania


    Electron beam melting (EBM) in vacuum is one of the most promising technologies for refining and recycling of metals that react with oxygen when heated. Hf is such a metal. Pure Hf (with a small content of gas and metal impurities) is needed for a variety of applications in the aerospace industry and metallurgy, in the production of components of nuclear reactors, microprocessors, optical components etc. We conducted experiments with the ELIT-60 equipment on Hf ingots at electron beam powers of 12, 15, 17 kW and obtained data about the concentration of impurities by the ICP-MS method. For further understanding and optimizing the Hf refining processes, a non-stationary heat model was applied for numerical simulation of the heat transfer processes. Simulation data about the liquid pool variation during the e-beam treatment was thus obtained. The flatness of the crystallization front shape, which is connected to the structure quality, was investigated by optimization criteria related to the curvature of the liquid/solid boundary curve. We also describe an algorithm for calculation of the criteria. One of the criteria was applied to EBM of Hf for different electron beam powers; the results obtained were confirmed by the experimental data. Combining experimental, theoretical and simulation results, a proper technological regime is proposed for better Hf refining.

  18. A new wideband HF technique for MHz-bandwidth spread-spectrum radio communications (United States)

    Perry, B. D.


    The one-way results are seen as demonstrating that equalized MHz-bandwidth skywave HF channels can be achieved using long-range one-hop F-layer propagation paths. It has thus become possible to use direct-sequence pseudo-noise or coherent fast-frequency-hop signaling at HF with processing gains of several orders of magnitude for teletype data rates. Possibilities are seen for using the spread spectrum in covert and/or jam-resistant communications. What is more, the equalized wideband HF channel is not subject to the fading caused by multiple propagation modes; as a consequence, it is substantially more reliable than the traditional narrow-band HF channel. Conversely, reliability comparable to traditional HF can be attained at greatly reduced signal margins. Since the time stability of the wideband HF channel is of the order of 10 s, very little channel-transmission time is needed for initializing and maintaining the equalizer. It is noted that probe signals similar to the channel-measuring waveform described here or spread-spectrum training sequences at the beginning of each message are adequate. Results from the 1982 two-way experimentation show that N(omega) is not reciprocal between terminals 2000 km apart.

  19. Finland HF and Esrange MST radar observations of polar mesosphere summer echoes

    Directory of Open Access Journals (Sweden)

    T. Ogawa

    Full Text Available Peculiar near range echoes observed in summer with the SuperDARN HF radar in Finland are presented. The echoes were detected at four frequencies of 9, 11, 13 and 15 MHz at slant ranges of 105–250 km for about 100 min. Interferometer measurements indicate that the echoes are returned from 80–100 km altitudes with elevation angles of 20°–60°. Echo power (< 16 dB, Doppler velocity (between –30 and + 30 ms-1 and spectral width (< 60 ms-1 fluctuate with periods of several to 20 min, perhaps due to short–period atmospheric gravity waves. When the HF radar detected the echoes, a vertical incidence MST radar, located at Esrange in Sweden (650 km north of the HF radar site, observed polar mesosphere summer echoes (PMSE at altitudes of 80–90 km. This fact suggests that the near range HF echoes are PMSE at HF band, although both radars did not probe a common volume. With increasing radar frequency, HF echo ranges are closer to the radar site and echo power becomes weaker. Possible mechanisms to explain these features are discussed.

    Key words. Meteorology and atmospheric dynamics (middle atmosphere dynamics; thermospheric dynamics; waves and tides; instruments and techniques

  20. Finishing and Commissioning the New Arecibo HF Facility (United States)

    Sulzer, M. P.; Gonzalez, S. A.


    The imminent completion of the major tasks in the construction of the New Arecibo HF facility means that we must verify that the components are working as intended. The antenna system and the transmitters must be separately commissioned before they can be connected together so that we an be sure it will provide 83 dbW at 8.175 MHz, and 80 dbW at 5.1 MHz. The antenna system will be ready for initial testing in September. It Illuminates the 305 meter dish using dipoles near the surface of the dish transmitting upward to a wire mesh sub-reflector. There are three crossed dipoles for each of the two frequencies. The dipoles are supported on towers mounted on concrete pads underneath the dish. Each dipole element is connected to a transmitter through a three inch coax line. The tower foundations are nearly complete, and the towers will be erected in early September, and we expect to have at least one crossed dipole in place for initial testing by the end of September. We will need to make some measurements on the antenna system to ensure that it meets our requirements. One requirement is to match the antenna impedance to the transmission line and the transmitter closely enough to meet the transmitter specifications, the closer, the better. We have additional requirements; for example, it is necessary for efficient use of the facility that the polarization be close to circular. In most experiments, we want O mode excitation. If we were to transmit linear only half the power would reach the reflection height. The symmetry of the system assures that most of the conditions for achieving accurate circular polarization are met, but one condition is not: that exciting the transmitters driving the orthogonal elements at 90 degrees assures 90 degree separation in the corresponding antenna currents. One of the dipoles of each pair points toward the center of the array. If we think of the three crossed dipoles as consisting of a reference and two that are excited relative to it

  1. Low Threshold Voltage and High Mobility N-Channel Metal-Oxide-Semiconductor Field-Effect Transistor Using Hf-Si/HfO2 Gate Stack Fabricated by Gate-Last Process (United States)

    Ando, Takashi; Hirano, Tomoyuki; Tai, Kaori; Yamaguchi, Shinpei; Yoshida, Shinichi; Iwamoto, Hayato; Kadomura, Shingo; Watanabe, Heiji


    Systematic characterization of Hf-Si/HfO2 gate stacks revealed two mobility degradation modes. One is carrier scattering by fixed charges and/or trapped charges induced by the crystallization in the thick HfO2 case (inversion oxide thickness, Tinv> 1.6 nm). The other is the Hf penetration into the interfacial layer with the Si substrate in the thin HfO2 case (Tinv< 1.6 nm) for the Hf-rich electrode. It was demonstrated that careful optimization of the HfO2 thickness and the Hf-Si composition can suppress both modes. As a result, a high electron mobility equivalent to that of n+polycrystalline silicon (poly-Si)/SiO2 (248 cm2 V-1 s-1 at Eeff=1 MV/cm) was obtained at Tinv of 1.47 nm. Moreover, the effective work function of the optimized Hf-Si/HfO2 gate stack is located within 50 mV from the Si band edge (Ec). An extremely high Ion of 1165 µA/µm (at Ioff = 81 nA/µm) at Vdd=1.0 V was demonstrated for a 45 nm gate n-channel metal-oxide-semiconductor field-effect transistor (n-MOSFET) without strain enhanced technology.

  2. Low modulus Ti–Nb–Hf alloy for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    González, M., E-mail: [Department of Materials Science and Metallurgy, Universitat Politècnica de Catalunya (UPC), Avda. Diagonal 647, 08028 Barcelona (Spain); Materials Science, Elisava Escola Superior de Disseny i Enginyeria de Barcelona, La Rambla 30-32, 08002 Barcelona (Spain); Peña, J. [Department of Materials Science and Metallurgy, Universitat Politècnica de Catalunya (UPC), Avda. Diagonal 647, 08028 Barcelona (Spain); Materials Science, Elisava Escola Superior de Disseny i Enginyeria de Barcelona, La Rambla 30-32, 08002 Barcelona (Spain); Gil, F.J.; Manero, J.M. [Department of Materials Science and Metallurgy, Universitat Politècnica de Catalunya (UPC), Avda. Diagonal 647, 08028 Barcelona (Spain); Ciber-BBN (Spain)


    β-Type titanium alloys with a low elastic modulus are a potential strategy to reduce stress shielding effect and to enhance bone remodeling in implants used to substitute failed hard tissue. For biomaterial application, investigation on the mechanical behavior, the corrosion resistance and the cell response is required. The new Ti25Nb16Hf alloy was studied before and after 95% cold rolling (95% C.R.). The mechanical properties were determined by tensile testing and its corrosion behavior was analyzed by potentiostatic equipment in Hank's solution at 37 °C. The cell response was studied by means of cytotoxicity evaluation, cell adhesion and proliferation measurements. The stress–strain curves showed the lowest elastic modulus (42 GPa) in the cold worked alloy and high tensile strength, similar to that of Ti6Al4V. The new alloy exhibited better corrosion resistance in terms of open circuit potential (E{sub OCP}), but was similar in terms of corrosion current density (i{sub CORR}) compared to Ti grade II. Cytotoxicity studies revealed that the chemical composition of the alloy does not induce cytotoxic activity. Cell studies in the new alloy showed a lower adhesion and a higher proliferation compared to Ti grade II presenting, therefore, mechanical features similar to those of human cortical bone and, simultaneously, a good cell response. - Highlights: • Presents low elastic modulus and high strength and elastic deformability. • Exhibits good biocompatibility in terms of cytotoxicity and cell response. • Corrosion resistance of this alloy is good, similar to that of Ti grade II. • Potential candidate for implants used to substitute failed hard tissue.

  3. FormLink/FeynCalcFormLink : Embedding FORM in Mathematica and FeynCalc

    CERN Document Server

    Feng, Feng


    FORM, a symbolic manipulation system, has been widely used in a lot of calculations for High Energy Physics due to its high performance and fficient design. Mathematica, another computational software program, has also widely been used, but more for reasons of generality and user-friendliness than for speed. Especially calculations involving tensors and noncommutative operations like calculating Dirac traces can be rather slow in Mathematica, compared to FORM. In this article we describe FormLink and FeynCalcFormLink, two Mathematica packages to link Mathematica and FeynCalc with FORM. FormLink can be used without FeynCalc and FeynCalcFormLink, which is an extension loading FormLink and FeynCalc automatically. With these two packages the impressive speed and other special features of FORM get embedded into the generality of Mathematica and FeynCalc in a simple manner. FeynCalcFormLink provides a FORM-based turbo for FeynCalc, making it much more efficient. FormLink turns Mathematica into an editor and code or...

  4. Linked data management

    CERN Document Server

    Hose, Katja; Schenkel, Ralf


    Linked Data Management presents techniques for querying and managing Linked Data that is available on today’s Web. The book shows how the abundance of Linked Data can serve as fertile ground for research and commercial applications. The text focuses on aspects of managing large-scale collections of Linked Data. It offers a detailed introduction to Linked Data and related standards, including the main principles distinguishing Linked Data from standard database technology. Chapters also describe how to generate links between datasets and explain the overall architecture of data integration systems based on Linked Data. A large part of the text is devoted to query processing in different setups. After presenting methods to publish relational data as Linked Data and efficient centralized processing, the book explores lookup-based, distributed, and parallel solutions. It then addresses advanced topics, such as reasoning, and discusses work related to read-write Linked Data for system interoperation. Desp...

  5. The audiomat: An automatic audiometer to be used in occupational audiometry (United States)

    Smoorenburg, G. F.; Vanraaij, J. L.; Mimpen, A. M.


    An automatic audiometer which runs fully automatically a customer tailored audiometric program using a microprocessor is described. It can be used as an independent unit, or it can be linked to an ITT 2020 microcomputer to control four audiomats simultaneously and asynchronously. The measurement procedure is based on the von Bekesy method optimized by research with test subjects and computer simulation. Two audiograms (left and right ears) based on 8 frequencies are measured within 8 min with an accuracy of 3dB. The audiomat is supplied with a transducer mounted in an earmuff, which makes it possible to measure thresholds in a not completely quiet environment.

  6. Interstitial solid solution Hf{sub 5}Ga{sub x}Sn{sub 3} (x = 0-1)

    Energy Technology Data Exchange (ETDEWEB)

    Voznyak, I., E-mail: [Department of Inorganic Chemistry, Ivan Franko National University of Lviv, Kyryla i Mefodiya St. 6, 79005 Lviv (Ukraine); Tokaychuk, Ya. [Department of Inorganic Chemistry, Ivan Franko National University of Lviv, Kyryla i Mefodiya St. 6, 79005 Lviv (Ukraine); Hlukhyy, V.; Faessler, T.F. [Department of Chemistry, Technische Universitaet Muenchen, Lichtenbergstr. 4, 85747 Garching (Germany); Gladyshevskii, R. [Department of Inorganic Chemistry, Ivan Franko National University of Lviv, Kyryla i Mefodiya St. 6, 79005 Lviv (Ukraine)


    Highlights: Black-Right-Pointing-Pointer Formation of an interstitial solid solution Hf{sub 5}Ga{sub x}Sn{sub 3} (x = 0-1) based on the binary compound Hf{sub 5}Sn{sub 3} was established at 600 Degree-Sign C. Black-Right-Pointing-Pointer The Ga atoms occupy [Hf{sub 6}] octahedral interstices (Wyckoff position 2b) up to the composition Hf{sub 5}GaSn{sub 3}, which represents a Hf{sub 5}CuSn{sub 3}-type structure (ordered derivative of Ti{sub 5}Ga{sub 4}). Black-Right-Pointing-Pointer The cell parameters and cell volume increase with increasing gallium content. Black-Right-Pointing-Pointer The coordination number of the hafnium atoms in Wyckoff position 6g is reduced from 15 (Hf1Sn{sub 5}Hf{sub 10} for Hf{sub 5}Sn{sub 3}) to 11 (Hf1Sn{sub 5}Ga{sub 2}Hf{sub 4} for Hf{sub 5}GaSn{sub 3}). - Abstract: Formation of an interstitial solid solution Hf{sub 5}Ga{sub x}Sn{sub 3} (x = 0-1) based on the binary compound Hf{sub 5}Sn{sub 3} (structure type Mn{sub 5}Si{sub 3}, Pearson symbol hP16, space group P6{sub 3}/mcm, a = 8.36562(6), c = 5.70775(4) Angstrom-Sign from X-ray powder diffraction) was established at 600 Degree-Sign C. The crystal structure (structure type Hf{sub 5}CuSn{sub 3}, ordered derivative of Ti{sub 5}Ga{sub 4}, hP18, P6{sub 3}/mcm) was refined on X-ray single-crystal diffraction data for three compositions: Hf{sub 5}Ga{sub 0.16(3)}Sn{sub 3} (a = 8.3288(12), c = 5.6988(11) Angstrom-Sign ), Hf{sub 5}Ga{sub 0.53(2)}Sn{sub 3} (a = 8.4205(12), c = 5.7655(12) Angstrom-Sign ) and Hf{sub 5}GaSn{sub 3} (a = 8.5564(12), c = 5.7859(12) Angstrom-Sign ). The Ga atoms occupy Wyckoff position 2b at the centres of Hf{sub 6} octahedral interstices.

  7. High frequency based detection of TIDs in the Net-TIDE project: challenges and opportunities for long HF paths (United States)

    Verhulst, Tobias


    Travelling Ionospheric Disturbances (TIDs) are the ionospheric signatures of atmospheric gravity waves. TIDs carry along information about their sources of excitations which may be either natural (energy input from the auroral region, earthquakes/tsunamis, hurricanes, solar terminator, and others) or artificial (ionospheric modification experiments, nuclear explosions, and other powerful blasts like industrial accidents). TIDs contribute to the energy and momentum exchange between different regions of the ionosphere, especially during geomagnetic storms. Their tracking is important because the TIDs affect all services that rely on predictable ionospheric radio wave propagation. Although a number of methods have been proposed to measure TID characteristics, none is able to operate in real time for monitoring purposes. In the framework of a new NATO Science for Peace and Security multi-year project (2014--2017) we are exploiting for the first time the European network of high precision ionospheric DPS4D sounders and the related software to directly identify TIDs over Europe and specify in real-time the gravity wave parameters based on measuring the variations of the angles-of-arrival and Doppler frequencies of ionospherically reflected HF radio signals. The project will run until 2017 and is expected to result in a pilot network of DPS4D ionospheric sounders in Europe, enhanced with a system to process the TID observations for real-time diagnostics and issue warnings for TIDs and the potential disturbance over the area. Based on these warnings the end-users can put in action specific mitigation techniques to protect their systems. The technical challenges of operating long distance ionospheric HF radio links for the detection of TIDs will be discussed.

  8. High-Frequency Link Inverter for Fuel Cells Based on Multiple-Carrier PWM

    Institute of Scientific and Technical Information of China (English)


    HIGH-FREQUENCY (I-IF) ac link inverter topologies, with or without soft switching, have important practical advantages compared to more conventional dc link inverters in terms of isolation, size of magnetics, and other properties. It is possible to obtain these basic advantages directly in a conventional PWM inverter with trans former-coupled output, but only if the transformer can handle the low modulating frequency. HF link topologies have not been common for medium power (1 to 20kW), largely because of the number of power stages and control complexity.

  9. 7 CFR 58.418 - Automatic cheese making equipment. (United States)


    ... processing or packaging areas. (c) Automatic salter. The automatic salter shall be constructed of stainless.... The automatic salter shall be constructed so that it can be satisfactorily cleaned. The salting...

  10. Analysis of sodium metal by X-ray fluorescence spectrometry (I). Determination of Hf, Mo, Nb, Ta, Ti, V and Zr; Analisis de sodio metal por espectrometria de fluorescencia de rayos X. Determinacion de Hf, Mo, Nb, Ta, Ti, V y Zr

    Energy Technology Data Exchange (ETDEWEB)

    Diaz-Guerra, J. P.


    A method allowing the determination of trace quantities of Hf, Mo, Nb, Ta, Ti, Vi and Zr in sodium metal previous transformation into Na{sub 2}S0{sub 4} is described. The enrichment of the impurities is performed through a coprecipitation technique in sulfuric medium by using Fe{sup 3}+ as a collector and cupferron or phenyfluorone as the precipitating reagent. The matrix influence and the best concentration of the collector (10/{mu}/ml), adequate pH (1,3 or 4, respectively) and optimum filter type (Millipore BSWP02500 or BDWP04700, respectively) have been studied, as well as the precipitation recoveries corresponding to the reagent above. It has been demonstrated the batter efficiency of the cupferron for determining all the Impurities. Detection limits range from 0.01 to 0.2 ppm., depending on the element, for samples 4 g in weight. An automatic spectrometer attached to a 16 K minicomputer and X-ray tube with a gold anode (2250-2700 W) are used. The Interferences between the lines ZrK{alpha} (2{sup n}d order) - HfL{alpha} and TiK{beta} - VK {alpha} have been studied and the respective correction coefficients have been deduced. (Author) 8 refs.

  11. Synthesis of metallic glasses and metallic glass based composites in the Cu-Mo-Hf system by ion beam mixing

    Institute of Scientific and Technical Information of China (English)

    BAI Xue; WANG TongLe; CUI YuanYuan; DING Ning; LI JiaHao; LIU BaiXin


    Single-phase and dual-phase metallic glasses as well as metallic glass based composites were synthesized in the Cu-Mo-Hf ternary metal system by 200 keV xenon ion beam mixing of far-from-equilibrium.It was found that Mo-Hf-based and Cu-Mo-based single-phase metallic glasses could be obtained at compositions around Cu17Mo20Hf63 and Cu34Mo57Hf9,respectively.Interestingly,at the nearly equal-atomic stoichiometry of Cu38Mo31Hf31,a dual-phase Cu-Mo-Hf metallic glass,consisting both of the Mo-Hf-based and Cu-Mo-based phases,was first obtained at relatively low irradiation doses ranging from (1-5)×1015 Xe+/cm2,and a single-phase metallic glass was eventually obtained at a dose of 7×1015 Xe+/cm2.In addition,two glass-based composites were obtained at the compositions of Cu14Mo62Hf24 and Cu77Mo14Hf9,and they consisted of the Mo-Hf based and Cu-Mo based metallic glasses,dissolved with some uniformly distributed BCC Mo-based and FCC Cu-based crystalline solid solutions,respectively.The formation mechanism of the above described non-equilibrium alloy phases was also discussed in terms of the atomic collision theory.

  12. Tracing Proterozoic arc mantle Hf isotope depletion of southern Fennoscandia through coupled zircon U-Pb and Lu-Hf isotopes (United States)

    Petersson, Andreas; Bjärnborg, Karolina; Scherstén, Anders; Gerdes, Axel; Næraa, Tomas


    Constraints on the composition of the depleted mantle Sm-Nd and Lu-Hf crust formation ages have a long history of scientific debate. When calculating mantle extraction ages, and constructing crustal growth models, a linear evolution of incompatible trace elements in a depleted mantle since > 4 Ga is routinely used. Mantle depletion however varies regionally and over time and subduction of sediments and oceanic crust renders a mantle-wedge variously enriched relative to a modelled depleted mantle. Here we show that primitive mantle-derived subduction related gabbroic intrusions from southern Fennoscandia have Hf isotope compositions that are enriched relative to a MORB-like linear depleted mantle evolution curve. Extrapolation of primitive Paleoproterozoic gabbro suites enables the construction of a regional mantle evolution curve, providing improved constraints on model ages, crustal residence times and the fraction of juvenile versus reworked continental crust. Convergent margins are assumed to be one of the main sites of continental crust growth, and using an overly depleted mantle source yield model ages that are too old, and hence cumulative crustal growth models show too much crust generation early in the Earth's history. The approach of using the Hf isotope composition of zircon from primitive subduction related gabbroic intrusions as a proxy for mantle Hf isotope composition, piloted in this study, can be applied to other convergent margins.

  13. HfO{sub 2} dielectric thickness dependence of electrical properties in graphene field effect transistors with double conductance minima

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Cheng; Xie, Dan, E-mail:; Xu, Jian-Long; Sun, Yi-Lin; Dai, Rui-Xuan; Li, Xian [Institute of Microelectronics, Tsinghua National Laboratory for Information Science and Technology (TNList), Tsinghua University, Beijing 100084 (China); Li, Xin-Ming [National Center for Nanoscience and Technology, Zhongguancun, Beijing 100190 (China); Zhu, Hong-Wei [School of Materials Science and Engineering, State Key Laboratory of New Ceramics and Fine Processing, Key Laboratory of Materials Processing Technology of MOE, Tsinghua University, Beijing 100084 (China); Center for Nano and Micro Mechanics, Tsinghua University, Beijing 100084 (China)


    We investigate the electrical properties in back-gated graphene field effect transistors (GFETs) with SiO{sub 2} dielectric and different thickness of high-k HfO{sub 2} dielectric. The results show that transform characteristic (I{sub ds}–V{sub gs}) curves of GFETs are uniquely W-shaped with two charge neutrality point (left and right) in both SiO{sub 2} and HfO{sub 2} dielectric (SiO{sub 2}-GFETs and HfO{sub 2}-GFETs). The gate voltage reduces drastically in HfO{sub 2}-GFETs compared with that in SiO{sub 2}-GFETs, and it becomes much smaller with the decline of HfO{sub 2} thickness. The left charge neutrality point in I{sub d}–V{sub g} curves of all HfO{sub 2}-GFETs is negative, compared to the positive ones in SiO{sub 2}-GFETs, which means that there exists n-doping in graphene with HfO{sub 2} as bottom dielectric. We speculate that this n-doping comes from the HfO{sub 2} layer, which brings fixed charged impurities in close proximity to graphene. The carrier mobility is also researched, demonstrating a decreasing trend of hole mobility in HfO{sub 2}-GFETs contrast to that in SiO{sub 2}-GFETs. In a series of HfO{sub 2}-GFETs with different HfO{sub 2} dielectric thickness, the hole mobility shows a tendency of rise when the thickness decreases to 7 nm. The possible reason might be due to the introduced impurities into HfO{sub 2} film from atomic layer deposition process, the concentration of which varies from the thickness of HfO{sub 2} layer.

  14. Automatic identification of type 2 diabetes, hypertension, ischaemic heart disease, heart failure and their levels of severity from Italian General Practitioners' electronic medical records: a validation study (United States)

    Schuemie, Martijn J; Mazzaglia, Giampiero; Lapi, Francesco; Francesconi, Paolo; Pasqua, Alessandro; Bianchini, Elisa; Montalbano, Carmelo; Roberto, Giuseppe; Barletta, Valentina; Cricelli, Iacopo; Cricelli, Claudio; Dal Co, Giulia; Bellentani, Mariadonata; Sturkenboom, Miriam; Klazinga, Niek


    Objectives The Italian project MATRICE aimed to assess how well cases of type 2 diabetes (T2DM), hypertension, ischaemic heart disease (IHD) and heart failure (HF) and their levels of severity can be automatically extracted from the Health Search/CSD Longitudinal Patient Database (HSD). From the medical records of the general practitioners (GP) who volunteered to participate, cases were extracted by algorithms based on diagnosis codes, keywords, drug prescriptions and results of diagnostic tests. A random sample of identified cases was validated by interviewing their GPs. Setting HSD is a database of primary care medical records. A panel of 12 GPs participated in this validation study. Participants 300 patients were sampled for each disease, except for HF, where 243 patients were assessed. Outcome measures The positive predictive value (PPV) was assessed for the presence/absence of each condition against the GP's response to the questionnaire, and Cohen's κ was calculated for agreement on the severity level. Results The PPV was 100% (99% to 100%) for T2DM and hypertension, 98% (96% to 100%) for IHD and 55% (49% to 61%) for HF. Cohen's kappa for agreement on the severity level was 0.70 for T2DM and 0.69 for hypertension and IHD. Conclusions This study shows that individuals with T2DM, hypertension or IHD can be validly identified in HSD by automated identification algorithms. Automatic queries for levels of severity of the same diseases compare well with the corresponding clinical definitions, but some misclassification occurs. For HF, further research is needed to refine the current algorithm. PMID:27940627

  15. Performance Analysis of ARQ-Based RF-FSO Links

    KAUST Repository

    Makki, Behrooz


    We study the performance of hybrid radio-frequency (RF) and free-space optical (FSO) links using automatic repeat request (ARQ). We derive closed-form expressions for the throughput and outage probability with different channel models. We also evaluate the effect of adaptive power allocation between the ARQ retransmissions on the system performance. The results show that joint implementation of the RF and FSO links leads to substantial performance improvement, compared to the cases with only the RF or the FSO link.

  16. A Hierarchy of Tree-Automatic Structures

    CERN Document Server

    Finkel, Olivier


    We consider $\\omega^n$-automatic structures which are relational structures whose domain and relations are accepted by automata reading ordinal words of length $\\omega^n$ for some integer $n\\geq 1$. We show that all these structures are $\\omega$-tree-automatic structures presentable by Muller or Rabin tree automata. We prove that the isomorphism relation for $\\omega^2$-automatic (resp. $\\omega^n$-automatic for $n>2$) boolean algebras (respectively, partial orders, rings, commutative rings, non commutative rings, non commutative groups) is not determined by the axiomatic system ZFC. We infer from the proof of the above result that the isomorphism problem for $\\omega^n$-automatic boolean algebras, $n > 1$, (respectively, rings, commutative rings, non commutative rings, non commutative groups) is neither a $\\Sigma_2^1$-set nor a $\\Pi_2^1$-set. We obtain that there exist infinitely many $\\omega^n$-automatic, hence also $\\omega$-tree-automatic, atomless boolean algebras $B_n$, $n\\geq 1$, which are pairwise isomorp...

  17. Early Differentiation of the Crust-Mantle System: a Hf Isotope Perspective (United States)

    Scherer, E.; Munker, C.; Mezger, K.


    The Lu decay constant recently determined by Scherer et al. 2001 (i.e., 1.865 x 10-11 yr-1) agrees with the results of the two latest physical counting experiments (1.86 x 10-11 yr-1; Dalmasso et al 1992, Nir-El and Lavi 1998), but is ca. 4 percent lower than the decay constants that have been used throughout the Hf isotope literature (e.g., 1.94 x 10-11, Tatsumoto et al., 1981; 1.93 x 10-11 Sguigna et al, 1982). In addition to making Lu-Hf ages older by ca. 4 percent, the revised decay constant also shifts the calculated initial epsilon Hf values of early Archean and Hadean rocks and zircons that are used to constrain crust-mantle differentiation in the early Earth. The initial epsilon Hf values for low-Lu/Hf samples such as zircons and evolved felsic rocks shift downward by 2-4 epsilon units, primarily due to the shift in the position of the CHUR evolution curve rather than that of the samples themselves. Mafic rocks, such as komatiites have higher Lu/Hf ratios that are closer to that of CHUR and therefore their initial epsilon Hf values do not shift as much (up to 1.3 epsilon units lower or 0.4 epsilon units higher). Using the old decay constant, some early Archean rocks (e.g., Amitsoq gneisses; Vervoort et al., 1996, Vervoort and Blichert-Toft, 1999) seemed to have very high initial epsilon Hf values (up to +6), implying that the upper mantle was moderately depleted in the early Archean and that a substantial volume of crust was produced in the Hadean. However, when recalculated with the new decay constant, the data suggest that the mantle was only slightly depleted, requiring less early crust extraction, and allowing a later date for the onset of significant crust production. In contrast, the extremely low recalculated epsilon Hf values of Earth's oldest zircons (Amelin et al., 1999, Amelin et al., 2000) indicate that Earth's first crust formed at or before 4.3 Ga, and that this crust remained intact long enough (>200 million years) to evolve to such low

  18. Automatic Weather Station (AWS) Lidar (United States)

    Rall, Jonathan A.R.; Abshire, James B.; Spinhirne, James D.; Smith, David E. (Technical Monitor)


    An autonomous, low-power atmospheric lidar instrument is being developed at NASA Goddard Space Flight Center. This compact, portable lidar will operate continuously in a temperature controlled enclosure, charge its own batteries through a combination of a small rugged wind generator and solar panels, and transmit its data from remote locations to ground stations via satellite. A network of these instruments will be established by co-locating them at remote Automatic Weather Station (AWS) sites in Antarctica under the auspices of the National Science Foundation (NSF). The NSF Office of Polar Programs provides support to place the weather stations in remote areas of Antarctica in support of meteorological research and operations. The AWS meteorological data will directly benefit the analysis of the lidar data while a network of ground based atmospheric lidar will provide knowledge regarding the temporal evolution and spatial extent of Type la polar stratospheric clouds (PSC). These clouds play a crucial role in the annual austral springtime destruction of stratospheric ozone over Antarctica, i.e. the ozone hole. In addition, the lidar will monitor and record the general atmospheric conditions (transmission and backscatter) of the overlying atmosphere which will benefit the Geoscience Laser Altimeter System (GLAS). Prototype lidar instruments have been deployed to the Amundsen-Scott South Pole Station (1995-96, 2000) and to an Automated Geophysical Observatory site (AGO 1) in January 1999. We report on data acquired with these instruments, instrument performance, and anticipated performance of the AWS Lidar.

  19. Pattern-Driven Automatic Parallelization

    Directory of Open Access Journals (Sweden)

    Christoph W. Kessler


    Full Text Available This article describes a knowledge-based system for automatic parallelization of a wide class of sequential numerical codes operating on vectors and dense matrices, and for execution on distributed memory message-passing multiprocessors. Its main feature is a fast and powerful pattern recognition tool that locally identifies frequently occurring computations and programming concepts in the source code. This tool also works for dusty deck codes that have been "encrypted" by former machine-specific code transformations. Successful pattern recognition guides sophisticated code transformations including local algorithm replacement such that the parallelized code need not emerge from the sequential program structure by just parallelizing the loops. It allows access to an expert's knowledge on useful parallel algorithms, available machine-specific library routines, and powerful program transformations. The partially restored program semantics also supports local array alignment, distribution, and redistribution, and allows for faster and more exact prediction of the performance of the parallelized target code than is usually possible.

  20. Automatic segmentation of psoriasis lesions (United States)

    Ning, Yang; Shi, Chenbo; Wang, Li; Shu, Chang


    The automatic segmentation of psoriatic lesions is widely researched these years. It is an important step in Computer-aid methods of calculating PASI for estimation of lesions. Currently those algorithms can only handle single erythema or only deal with scaling segmentation. In practice, scaling and erythema are often mixed together. In order to get the segmentation of lesions area - this paper proposes an algorithm based on Random forests with color and texture features. The algorithm has three steps. The first step, the polarized light is applied based on the skin's Tyndall-effect in the imaging to eliminate the reflection and Lab color space are used for fitting the human perception. The second step, sliding window and its sub windows are used to get textural feature and color feature. In this step, a feature of image roughness has been defined, so that scaling can be easily separated from normal skin. In the end, Random forests will be used to ensure the generalization ability of the algorithm. This algorithm can give reliable segmentation results even the image has different lighting conditions, skin types. In the data set offered by Union Hospital, more than 90% images can be segmented accurately.

  1. Automatic Assessment of Programming assignment

    Directory of Open Access Journals (Sweden)

    Surendra Gupta


    Full Text Available In today’s world study of computer’s language is more important. Effective and good programming skills are need full all computer science students. They can be master in programming, only through intensive exercise practices. Due to day by day increasing number of students in the class, the assessment of programming exercises leads to extensive workload for teacher/instructor, particularly if it has to be carried out manually. In this paper, we propose an automatic assessment system for programming assignments, using verification program with random inputs. One of the most important properties of a program is that, it carries out its intended function. The intended function of a program or part of a program can be verified by using inverse function’s verification program. For checking intended functionality and evaluation of a program, we have used verification program. This assessment system has been tested on basic C programming courses, and results shows that it can work well in basic programming exercises, with some initial promising results

  2. Automatic Transmission Of Liquid Nitrogen

    Directory of Open Access Journals (Sweden)

    Sumedh Mhatre


    Full Text Available Liquid Nitrogen is one of the major substance used as a chiller in industry such as Ice cream factory Milk Diary Storage of blood sample Blood Bank etc. It helps to maintain the required product at a lower temperature for preservation purpose. We cannot fully utilise the LN2 so practically if we are using 3.75 litre LN2 for a single day then around 12 of LN2 450 ml is wasted due to vaporisation. A pressure relief valve is provided to create a pressure difference. If there is no pressure difference between the cylinder carrying LN2 and its surrounding it will results in damage of container as well as wastage of LN2.Transmission of LN2 from TA55 to BA3 is carried manually .So care must be taken for the transmission of LN2 in order to avoid its wastage. With the help of this project concept the transmission of LN2 will be carried automatically so as to reduce the wastage of LN2 in case of manual operation.

  3. Automatic image cropping for republishing (United States)

    Cheatle, Phil


    Image cropping is an important aspect of creating aesthetically pleasing web pages and repurposing content for different web or printed output layouts. Cropping provides both the possibility of improving the composition of the image, and also the ability to change the aspect ratio of the image to suit the layout design needs of different document or web page formats. This paper presents a method for aesthetically cropping images on the basis of their content. Underlying the approach is a novel segmentation-based saliency method which identifies some regions as "distractions", as an alternative to the conventional "foreground" and "background" classifications. Distractions are a particular problem with typical consumer photos found on social networking websites such as FaceBook, Flickr etc. Automatic cropping is achieved by identifying the main subject area of the image and then using an optimization search to expand this to form an aesthetically pleasing crop. Evaluation of aesthetic functions like auto-crop is difficult as there is no single correct solution. A further contribution of this paper is an automated evaluation method which goes some way towards handling the complexity of aesthetic assessment. This allows crop algorithms to be easily evaluated against a large test set.

  4. Magnetism of coexisting rhombohedral and orthorhombic Hf{sub 2}Co{sub 11} phases in rapidly quenched Hf{sub 2}Co{sub 11}B

    Energy Technology Data Exchange (ETDEWEB)

    Musiał, A. [Institute of Molecular Physics, Polish Academy of Sciences, M. Smoluchowskiego 17, Poznań 60-179 (Poland); Nanobiomedical Centre, Adam Mickiewicz University in Poznań, Umultowska 85, Poznań 61-614 (Poland); Śniadecki, Z., E-mail: [Institute of Molecular Physics, Polish Academy of Sciences, M. Smoluchowskiego 17, Poznań 60-179 (Poland); Marcin, J.; Kováč, J.; Škorvánek, I. [Institute of Experimental Physics, Slovak Academy of Sciences, Watsonova 47, Košice 040 01 (Slovakia); Idzikowski, B. [Institute of Molecular Physics, Polish Academy of Sciences, M. Smoluchowskiego 17, Poznań 60-179 (Poland)


    Evolution of crystalline structure caused by heat treatment and its influence on magnetic properties of two melt-spun Hf{sub 2}Co{sub 11}B alloys in fully amorphous and partially crystalline states have been investigated. The as-cast ribbons were annealed in order to improve the hard magnetic properties by inducing the formation of nanocrystalline phases with high anisotropy. The X-ray diffraction and magnetic measurements confirmed the coexistence of two Hf{sub 2}Co{sub 11} phases, crystallizing in different structures, with the rhombohedral one showing hard magnetic properties. Annealing of fully amorphous alloy resulted in the lower coercive field in comparison to that of annealed partially crystalline ribbon. From the point of view of exchange coupling between magnetic phases and magnetic hardening, the optimum annealing temperature and time were determined to be 570 °C and 60 min, for partially crystalline sample. Annealing at 650 °C for 1 h leads to excess of the HfCo{sub 3}B{sub 2} phase above the critical value and results in a decrease in the coercive field. Isothermal annealing increases the magnetocrystalline anisotropy constant K{sub 1} from 7.52 for the as-quenched sample to 12.11 Merg/cm{sup 3} for the partially crystalline ribbon. The existence of quenched-in nanocrystals resulted in higher coercive fields, up to 3.23 kOe, after annealing. - Highlights: • Hf{sub 2}Co{sub 11}B rapidly quenched in two states: (i) amorphous, (ii) partially crystalline. • formation of nanocrystalline phases with high magnetic anisotropy. • high magnetocrystalline anisotropy constant K{sub 1} > 10 Merg/cm{sup 3} • coexistence of two Hf{sub 2}Co{sub 11} phases: (i) rhombohedral and (ii) orthorhombic.

  5. Document Exploration and Automatic Knowledge Extraction for Unstructured Biomedical Text (United States)

    Chu, S.; Totaro, G.; Doshi, N.; Thapar, S.; Mattmann, C. A.; Ramirez, P.


    We describe our work on building a web-browser based document reader with built-in exploration tool and automatic concept extraction of medical entities for biomedical text. Vast amounts of biomedical information are offered in unstructured text form through scientific publications and R&D reports. Utilizing text mining can help us to mine information and extract relevant knowledge from a plethora of biomedical text. The ability to employ such technologies to aid researchers in coping with information overload is greatly desirable. In recent years, there has been an increased interest in automatic biomedical concept extraction [1, 2] and intelligent PDF reader tools with the ability to search on content and find related articles [3]. Such reader tools are typically desktop applications and are limited to specific platforms. Our goal is to provide researchers with a simple tool to aid them in finding, reading, and exploring documents. Thus, we propose a web-based document explorer, which we called Shangri-Docs, which combines a document reader with automatic concept extraction and highlighting of relevant terms. Shangri-Docsalso provides the ability to evaluate a wide variety of document formats (e.g. PDF, Words, PPT, text, etc.) and to exploit the linked nature of the Web and personal content by performing searches on content from public sites (e.g. Wikipedia, PubMed) and private cataloged databases simultaneously. Shangri-Docsutilizes Apache cTAKES (clinical Text Analysis and Knowledge Extraction System) [4] and Unified Medical Language System (UMLS) to automatically identify and highlight terms and concepts, such as specific symptoms, diseases, drugs, and anatomical sites, mentioned in the text. cTAKES was originally designed specially to extract information from clinical medical records. Our investigation leads us to extend the automatic knowledge extraction process of cTAKES for biomedical research domain by improving the ontology guided information extraction

  6. Automatic Testing of a CANopen Node


    Liang, Hui


    This Bachelor’s thesis was commissioned by TK Engineering Oy in Vaasa. The goals of the thesis were to test a prototype CANopen node, called UWASA Node for conformance to the CiA 301 standard, and to develop the automatic performance test software and the automatic CiA 401 test software. A test report that describes to the designer what needs to be corrected and improved is made in this thesis. For the CiA 301 test there is a CANopen conformance test tool that can be used. The automatic perfo...

  7. An Automatic Clustering Technique for Optimal Clusters

    CERN Document Server

    Pavan, K Karteeka; Rao, A V Dattatreya; 10.5121/ijcsea.2011.1412


    This paper proposes a simple, automatic and efficient clustering algorithm, namely, Automatic Merging for Optimal Clusters (AMOC) which aims to generate nearly optimal clusters for the given datasets automatically. The AMOC is an extension to standard k-means with a two phase iterative procedure combining certain validation techniques in order to find optimal clusters with automation of merging of clusters. Experiments on both synthetic and real data have proved that the proposed algorithm finds nearly optimal clustering structures in terms of number of clusters, compactness and separation.

  8. Effects of biased irradiation on charge trapping in HfO2 dielectric thin films (United States)

    Mu, Yifei; Zhao, Ce Zhou; Lu, Qifeng; Zhao, Chun; Qi, Yanfei; Lam, Sang; Mitrovic, Ivona Z.; Taylor, Stephen; Chalker, Paul R.


    This paper reports the low-dose-rate radiation response of Al-HfO2/SiO2-Si MOS devices, in which the gate dielectric was formed by atomic layer deposition (ALD) with 5-nm equivalent oxide thickness. The degradation of the devices was characterized by a pulse capacitance-voltage (CV) and on-site radiation response technique under continuous gamma (γ) ray exposure at a relatively low dose rate of 0.116 rad (HfO2)/s. Compared with conventional CV measurements, the proposed measurements extract significant variations of flat-band voltage shift of the hafnium based MOS devices. The large flat-band voltage shift is mainly attributed to the radiation-induced oxide trapped charges, which are not readily compensated by bias-induced charges produced over the measurement timescales (for timescales less than 5 ms). A negative flat-band voltage shift up to -1.02 V was observed under a positive biased irradiation with the total dose up to 40 krad (HfO2) and with the electric field of 0.5 MV/cm. This is attributed to net positive charge generation in the HfO2 oxide layer. The generated charges are transported towards the HfO2/SiO2 interface, and then form effective trapped holes in the HfO2. Similarly, a positive flat-band voltage shift up to 1.1 V was observed from irradiation under negative bias with an electric field of -0.5 MV/cm. The positive shift is mainly due to the accumulation of trapped electrons. Analyses of the experimental results suggest that both hole and electron trapping can dominate the radiation response performance of the HfO2-based MOS devices depending upon the applied bias. It was also found there was no distinct border traps with irradiation in all cases.

  9. Early Postdischarge STOP-HF-Clinic Reduces 30-day Readmissions in Old and Frail Patients With Heart Failure. (United States)

    Pacho, Cristina; Domingo, Mar; Núñez, Raquel; Lupón, Josep; Moliner, Pedro; de Antonio, Marta; González, Beatriz; Santesmases, Javier; Vela, Emili; Tor, Jordi; Bayes-Genis, Antoni


    Heart failure (HF) is associated with a high rate of readmissions within 30 days postdischarge. Strategies to lower readmission rates generally show modest results. To reduce readmission rates, we developed a STructured multidisciplinary outpatient clinic for Old and frail Postdischarge patients hospitalized for HF (STOP-HF-Clinic). This prospective all-comers study enrolled patients discharged from internal medicine or geriatric wards after HF hospitalization. The intervention involved a face-to-face early visit (within 7 days), HF nurse education, treatment titration, and intravenous medication when needed. Thirty-day readmission risk was calculated using the CORE-HF risk score. We also studied the impact of 30-day readmission burden on regional health care by comparing the readmission rate in the STOP-HF-Clinic Referral Area (∼250000 people) with that of the rest of the Catalan Health Service (CatSalut) (∼7.5 million people) during the pre-STOP-HF-Clinic (2012-2013) and post-STOP-HF-Clinic (2014-2015) time periods. From February 2014 to June 2016, 518 consecutive patients were included (age, 82 years; Barthel score, 70; Charlson index, 5.6, CORE-HF 30-day readmission risk, 26.5%). The observed all-cause 30-day readmission rate was 13.9% (47.5% relative risk reduction) and the observed HF-related 30-day readmission rate was 7.5%. The CatSalut registry included 65131 index HF admissions, with 9267 all-cause and 6686 HF-related 30-day readmissions. The 30-day readmission rate was significantly reduced in the STOP-HF-Clinic Referral Area in 2014-2015 compared with 2012-2013 (P < .001), mainly driven by fewer HF-related readmissions. The STOP-HF-Clinic, an approach that could be promptly implemented elsewhere, is a valuable intervention for reducing the global burden of early readmissions among elder and vulnerable patients with HF. Copyright © 2017 Sociedad Española de Cardiología. Published by Elsevier España, S.L.U. All rights reserved.

  10. Dual HF radar study of the subauroral polarization stream

    Directory of Open Access Journals (Sweden)

    R. A. Makarevich


    Full Text Available The dual HF radars comprising the Tasman International Geophysical Environment Radar (TIGER system often observe localized high-velocity F-region plasma flows (≥1500 m/s in the midnight sector (20:00–02:00 MLT at magnetic latitudes as low as Λ=60° S. The flow channels exhibit large variability in the latitudinal extent and electric field strength, and are similar to the subauroral polarization stream or SAPS, a plasma convection feature thought to be related to the polarization electric field due to the charge separation during substorm and storm development. In this study, the 2-D plasma drift velocity within the channel is derived for each of the two TIGER radars from the maximum velocities measured in all 16 radar beams within the latitudinally narrow channel, and the time variation of the subauroral electric field is examined near substorm onset. It is demonstrated that the flow channel often does not have a clear onset, rather it manifests differently in different phases of its evolution and can persist for at least two substorm cycles. During the growth phase the electric fields within the flow channel are difficult to distinguish from those of the background auroral convection but they start to increase near substorm onset and peak during the recovery phase, in contrast to what has been reported previously for auroral convection which peaks just before the substorm onset and falls sharply at the substorm onset. The response times to substorm onset range from −5 to +40 min and show some dependence on the substorm location with longer delays observed for substorms eastward of the radars' viewing area. The propagation velocity of the high-velocity region is also investigated by comparing the observations from the two closely-spaced TIGER radars. The observations are consistent with the notion that the polarization electric field is established with the energetic ions drifting westward and equatorward from the initial substorm

  11. Hybrid flow analyzer for automatic hollow-fiber-assisted ionic liquid-based liquid-phase microextraction with in-line membrane regeneration. (United States)

    Nitiyanontakit, Sira; Varanusupakul, Pakorn; Miró, Manuel


    The proof-of-concept of a new methodology for in-line hollow-fiber (HF)-assisted three-phase liquid-phase microextraction (LPME) allowing for handling of the feed and acceptor aqueous solutions and of minute volumes of the organic extracting phase in a programmable flow mode is reported in this paper. The flow analyzer fosters in-line anchoring of ionic-liquid-laden extracting solution (10 % (v/v) methyltrioctyl ammonium chloride in kerosene) in the pores of a single-strand microporous polypropylene HF, and regeneration of the liquid-phase membrane itself for each individual analysis cycle in a fully automated mode. Using hexavalent chromium as a model analyte and 1,5-diphenylcarbazide as a chromogenic probe in the acceptor solution, the flow-based HF-LPME hyphenated system was harnessed to the clean-up of troublesome samples (viz., domestic wastewater and soil leachates) with concomitant enrichment of target species. Distinct extraction modes and chemistries were assessed for enhanced Cr(VI) permeability. A single sample plug was subjected to a twofold backward-forward flow extraction so as to decrease the thickness of the boundary layer at the HF shell side for improved extraction efficiency. Under the optimized physicochemical variables, a limit of detection of 4.6 μg L(-1) Cr(VI), a dynamic linear range of up to 500 μg L(-1) and intermediate precision better than 10 % were obtained for a sample volume of 2.8 mL buffered at pH 4 and a volume of organic extractant of 120 μL, with an enrichment factor of ca. 11 for a sample residence time in the donor compartment of merely 4.5 min. Analyte recoveries in domestic wastewaters were ≥83 % using external calibration with relative standard deviations better than 14 %, thereby demonstrating the expedient clean-up of samples with elevated content of dissolved organic carbon. The automatic HF-LPME method was validated in terms of bias against the SRM 2701 (NIST soil) preceded by the EPA alkaline digestion method 3060A

  12. Luminescence and scintillation properties of Tl- and Ce-doped Cs2HfCl6 crystals (United States)

    Saeki, Keiichiro; Fujimoto, Yutaka; Koshimizu, Masanori; Nakauchi, Daisuke; Tanaka, Hironori; Yanagida, Takayuki; Asai, Keisuke


    The luminescence and scintillation properties of Tl- and Ce-doped Cs2HfCl6 crystals were investigated by photoluminescence and radioluminescence spectroscopy. In the photoluminescence spectra, emission bands of the activators were observed at 500 nm for Tl-doped Cs2HfCl6, and at 340 and 380 nm for Ce-doped Cs2HfCl6. The radioluminescence bands were observed at 405 and 430 nm for Tl- and Ce-doped Cs2HfCl6, respectively. Scintillation decay time constants for the Tl- and Ce-doped Cs2HfCl6 were smaller than those for the corresponding undoped crystals. Scintillation light yields for Tl- and Ce-doped Cs2HfCl6 were estimated to be 23,700 and 15,700 photons/MeV, respectively.

  13. The atomic structure and chemical composition of HfOx (x < 2) films prepared by ion-beam sputtering deposition (United States)

    Aliev, V. S.; Gerasimova, A. K.; Kruchinin, V. N.; Gritsenko, V. A.; Prosvirin, I. P.; Badmaeva, I. A.


    Non-stoichiometric HfOx films of different chemical composition (x partial pressure in a chamber. An effect of chemical composition on the atomic structure of the films was studied by reflection high-energy electron diffraction, x-ray photoelectron spectroscopy and field emission scanning electron microscopy methods. The films were found to be amorphous, consisting only of three components: Hf-metal clusters, Hf4O7 suboxide and stoichiometric HfO2. The relative concentration of these components varies with changing x. The surface of the films contains the increased oxygen content compared to the bulk. It was found that the Hf4O7 suboxide concentration is maximal at x = 1.8. The concept of hafnium oxide film growth by the IBSD method is proposed to explain the lack of suboxides variety in the films and the instability of HfO2, when annealed at high temperature.

  14. The study of single station inverting the sea surface current by HF ground wave radar based on adjoint assimilation technology (United States)

    Han, Shuzong; Yang, Hua; Xue, Wenhu; Wang, Xingchi


    This paper introduces the assimilation technology in an ocean dynamics model and discusses the feasibility of inverting the sea surface current in the detection zone by assimilating the sea current radial velocity detected by single station HF ground wave radar in ocean dynamics model. Based on the adjoint assimilation and POM model, the paper successfully inverts the sea surface current through single station HF ground wave radar in the Zhoushan sea area. The single station HF radar inversion results are also compared with the bistatic HF radar composite results and the fixed point measured results by Annderaa current meter. The error analysis shows that acquisition of flow velocity and flow direction data from the single station HF radar based on adjoint assimilation and POM model is viable and the data obtained have a high correlation and consistency with the flow field observed by HF radar.

  15. Microstructure and Corrosion Behavior of Hf-40 Wt Pct Ti Alloy in Nitric Acid Medium for Reprocessing Applications (United States)

    Jayaraj, J.; Ravi, K. R.; Mallika, C.; Kamachi Mudali, U.


    The Hf-40 wt pct Ti (Hf-Ti) alloy was developed for neutron poison application in the spent nuclear fuel reprocessing plant. The furnace-cooled Hf-Ti sample exhibited the microstructure comprising equiaxed-α, lamellar-α, and feathery-α. The water-quenched Hf-Ti sample confirmed the presence of lath and internally twinned martensite. In comparison to the furnace-cooled sample, low corrosion current density and passivation current density values obtained for the water-quenched Hf-Ti in 6 M HNO3 at 298 K (25 °C) indicated better passivation ability. The martensitic structure exhibited high hardness (660 HV) and negligible corrosion rate in 6 M nitric acid at 298 K (25 °C). X-ray photoelectron spectroscopic (XPS) analysis confirmed that passivation behavior of this alloy was due to the protective passive film composed of TiO2 and HfO2.

  16. Ferroelectric-field-effect-enhanced resistance performance of TiN/Si:HfO2/oxygen-deficient HfO2/TiN resistive switching memory cells (United States)

    Jiang, Ran; Wu, Zhengran; Du, Xianghao; Han, Zuyin; Sun, Weideng


    Greatly improved resistance performance, including high resistance ratio between the high resistance state and the low resistance state, long-time retention, and reliable endurance, was observed in TiN/Si:HfO2/oxygen-deficient HfO2/TiN memory cells. The enhanced resistance ratio is ascribed to the creation/elimination of an extra barrier in oxygen-deficient HfO2 layer in response to the polarization reversal in the ferroelectric Si:HfO2 layer. Along with the enhanced resistance ratio, the long retention and good endurance make the proposed device a promising candidate for non-volatile resistive memories.

  17. Gas-phase reaction studies of dipositive hafnium and hafnium oxide ions: generation of the peroxide HfO2(2+). (United States)

    Lourenço, Célia; Michelini, Maria del Carmen; Marçalo, Joaquim; Gibson, John K; Oliveira, Maria Conceição


    Fourier transform ion cyclotron resonance mass spectrometry was used to characterize the gas-phase reactivity of Hf dipositive ions, Hf(2+)and HfO(2+), toward several oxidants: thermodynamically facile O-atom donor N(2)O, ineffective donor CO, and intermediate donors O(2), CO(2), NO, and CH(2)O. The Hf(2+) ion exhibited electron transfer with N(2)O, O(2), NO, and CH(2)O, reflecting the high ionization energy of Hf(+). The HfO(2+) ion was produced by O-atom transfer to Hf(2+) from N(2)O, O(2), and CO(2), and the HfO(2)(2+) ion by O-atom transfer to HfO(2+) from N(2)O; these reactions were fairly efficient. Density functional theory revealed the structure of HfO(2)(2+) as a peroxide. The HfO(2)(2+) ion reacted by electron transfer with N(2)O, CO(2), and CO to give HfO(2)(+). Estimates were made for the second ionization energies of Hf (14.5 ± 0.5 eV), HfO (14.3 ± 0.5 eV), and HfO(2) (16.2 ± 0.5 eV), and also for the bond dissociation energies, D[Hf(2+)-O] = 686 ± 69 kJ mol(-1) and D[OHf(2+)-O] = 186 ± 98 kJ mol(-1). The computed bond dissociation energies, 751 and 270 kJ mol(-1), respectively, are within these experimental ranges. Additionally, it was found that HfO(2)(2+) oxidized CO to CO(2) and is thus a catalyst in the oxidation of CO by N(2)O and that Hf(2+) activates methane to produce a carbene, HfCH(2)(2+).

  18. Bonding and Site Preferences in the New Quasi-Binary Zr 2.7Hf 11.3P 9 (United States)

    Kleinke, Holger; Franzen, Hugo F.


    The new quasi-binary Zr 2.7Hf 11.3P 9was synthesized by arc-melting of Zr, Hf, Co, and HfP in a ratio corresponding to the initial composition "Zr 2.25Hf 6.75Co 2P 4". Zr 2.7Hf 11.3P 9crystallizes in the Zr 14P 9structure type, which is unknown in the binary Hf/P system. The ideal orthorhombic lattice dimensions (space group Pnnm(No. 58), Z=4) were refined to a=16.640(7) Å, b=27.40(2) Å, c=3.619(1) Å, V=1650(2) Å 3. The structure consists of three-dimensional condensed one-, two-, and three-capped trigonal (Zr, Hf) 6P prisms, occurring with numerous short M- Mbonds ( M=Zr, Hf). Each of the 15 metal sites is statistically occupied by a mixture of Zr and Hf, which varies significantly from site to site. The Hf/Zr ratio in a given site depends on the M- Mand M-P interactions. The systematic increase of this ratio with increasing total bond order, as evaluated via Mulliken overlap populations and Pauling bond orders, can be understood based on the trend that Hf forms stronger M- Mand M-P bonds than Zr. As expected for a metal-rich phosphide, band structure calculations for the hypothetical "Hf 14P 9" carried out with the extended Hückel approximation result in a significant density of states at the Fermi level.

  19. Automatic thoracic body region localization (United States)

    Bai, PeiRui; Udupa, Jayaram K.; Tong, YuBing; Xie, ShiPeng; Torigian, Drew A.


    Radiological imaging and image interpretation for clinical decision making are mostly specific to each body region such as head & neck, thorax, abdomen, pelvis, and extremities. For automating image analysis and consistency of results, standardizing definitions of body regions and the various anatomic objects, tissue regions, and zones in them becomes essential. Assuming that a standardized definition of body regions is available, a fundamental early step needed in automated image and object analytics is to automatically trim the given image stack into image volumes exactly satisfying the body region definition. This paper presents a solution to this problem based on the concept of virtual landmarks and evaluates it on whole-body positron emission tomography/computed tomography (PET/CT) scans. The method first selects a (set of) reference object(s), segments it (them) roughly, and identifies virtual landmarks for the object(s). The geometric relationship between these landmarks and the boundary locations of body regions in the craniocaudal direction is then learned through a neural network regressor, and the locations are predicted. Based on low-dose unenhanced CT images of 180 near whole-body PET/CT scans (which includes 34 whole-body PET/CT scans), the mean localization error for the boundaries of superior of thorax (TS) and inferior of thorax (TI), expressed as number of slices (slice spacing ≍ 4mm)), and using either the skeleton or the pleural spaces as reference objects, is found to be 3,2 (using skeleton) and 3, 5 (using pleural spaces) respectively, or in mm 13, 10 mm (using skeleton) and 10.5, 20 mm (using pleural spaces), respectively. Improvements of this performance via optimal selection of objects and virtual landmarks and other object analytics applications are currently being pursued. and the skeleton and pleural spaces used as a reference objects

  20. Automatic tuning of myoelectric prostheses. (United States)

    Bonivento, C; Davalli, A; Fantuzzi, C; Sacchetti, R; Terenzi, S


    This paper is concerned with the development of a software package for the automatic tuning of myoelectric prostheses. The package core consists of Fuzzy Logic Expert Systems (FLES) that embody skilled operator heuristics in the tuning of prosthesis control parameters. The prosthesis system is an artificial arm-hand system developed at the National Institute of Accidents at Work (INAIL) laboratories. The prosthesis is powered by an electric motor that is controlled by a microprocessor using myoelectric signals acquired from skin-surface electrodes placed on a muscle in the residual limb of the subject. The software package, Microprocessor Controlled Arm (MCA) Auto Tuning, is a tool for aiding both INAIL expert operators and unskilled persons in the controller parameter tuning procedure. Prosthesis control parameter setup and subsequent recurrent adjustments are fundamental for the correct working of the prosthesis, especially when we consider that myoelectric parameters may vary greatly with environmental modifications. The parameter adjustment requires the end-user to go to the manufacturer's laboratory for the control parameters setup because, generally, he/she does not have the necessary knowledge and instruments to do this at home. However, this procedure is not very practical and involves a waste of time for the technicians and uneasiness for the clients. The idea behind the MCA Auto Tuning package consists in translating technician expertise into an FLES knowledge database. The software interacts through a user-friendly graphic interface with an unskilled user, who is guided through a step-by-step procedure in the prosthesis parameter tuning that emulates the traditional expert-aided procedure. The adoption of this program on a large scale may yield considerable economic benefits and improve the service quality supplied to the users of prostheses. In fact, the time required to set the prosthesis parameters are remarkably reduced, as is the technician

  1. Automatization and familiarity in repeated checking

    NARCIS (Netherlands)

    Dek, Eliane C P; van den Hout, Marcel A.; Giele, Catharina L.; Engelhard, Iris M.


    Repeated checking paradoxically increases memory uncertainty. This study investigated the underlying mechanism of this effect. We hypothesized that as a result of repeated checking, familiarity with stimuli increases, and automatization of the checking procedure occurs, which should result in decrea

  2. Automatic Speech Segmentation Based on HMM

    Directory of Open Access Journals (Sweden)

    M. Kroul


    Full Text Available This contribution deals with the problem of automatic phoneme segmentation using HMMs. Automatization of speech segmentation task is important for applications, where large amount of data is needed to process, so manual segmentation is out of the question. In this paper we focus on automatic segmentation of recordings, which will be used for triphone synthesis unit database creation. For speech synthesis, the speech unit quality is a crucial aspect, so the maximal accuracy in segmentation is needed here. In this work, different kinds of HMMs with various parameters have been trained and their usefulness for automatic segmentation is discussed. At the end of this work, some segmentation accuracy tests of all models are presented.

  3. Collapsible truss structure is automatically expandable (United States)


    Coil springs wound with maximum initial tension in a three-truss, closed loop structure form a collapsible truss structure. The truss automatically expands and provides excellent rigidity and close dimensional tolerance when expanded.

  4. Automatic coding of online collaboration protocols

    NARCIS (Netherlands)

    Erkens, Gijsbert; Janssen, J.J.H.M.


    An automatic coding procedure is described to determine the communicative functions of messages in chat discussions. Five main communicative functions are distinguished: argumentative (indicating a line of argumentation or reasoning), responsive (e.g., confirmations, denials, and answers), informati

  5. 2010 United States Automatic Identification System Database (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The 2010 United States Automatic Identification System Database contains vessel traffic data for planning purposes within the U.S. coastal waters. The database is...

  6. 12th Portuguese Conference on Automatic Control

    CERN Document Server

    Soares, Filomena; Moreira, António


    The biennial CONTROLO conferences are the main events promoted by The CONTROLO 2016 – 12th Portuguese Conference on Automatic Control, Guimarães, Portugal, September 14th to 16th, was organized by Algoritmi, School of Engineering, University of Minho, in partnership with INESC TEC, and promoted by the Portuguese Association for Automatic Control – APCA, national member organization of the International Federation of Automatic Control – IFAC. The seventy-five papers published in this volume cover a wide range of topics. Thirty-one of them, of a more theoretical nature, are distributed among the first five parts: Control Theory; Optimal and Predictive Control; Fuzzy, Neural and Genetic Control; Modeling and Identification; Sensing and Estimation. The papers go from cutting-edge theoretical research to innovative control applications and show expressively how Automatic Control can be used to increase the well being of people. .

  7. Automatic Evolution of Molecular Nanotechnology Designs (United States)

    Globus, Al; Lawton, John; Wipke, Todd; Saini, Subhash (Technical Monitor)


    This paper describes strategies for automatically generating designs for analog circuits at the molecular level. Software maps out the edges and vertices of potential nanotechnology systems on graphs, then selects appropriate ones through evolutionary or genetic paradigms.

  8. Automatic lexical classification: bridging research and practice. (United States)

    Korhonen, Anna


    Natural language processing (NLP)--the automatic analysis, understanding and generation of human language by computers--is vitally dependent on accurate knowledge about words. Because words change their behaviour between text types, domains and sub-languages, a fully accurate static lexical resource (e.g. a dictionary, word classification) is unattainable. Researchers are now developing techniques that could be used to automatically acquire or update lexical resources from textual data. If successful, the automatic approach could considerably enhance the accuracy and portability of language technologies, such as machine translation, text mining and summarization. This paper reviews the recent and on-going research in automatic lexical acquisition. Focusing on lexical classification, it discusses the many challenges that still need to be met before the approach can benefit NLP on a large scale.

  9. Automaticity in social-cognitive processes. (United States)

    Bargh, John A; Schwader, Kay L; Hailey, Sarah E; Dyer, Rebecca L; Boothby, Erica J


    Over the past several years, the concept of automaticity of higher cognitive processes has permeated nearly all domains of psychological research. In this review, we highlight insights arising from studies in decision-making, moral judgments, close relationships, emotional processes, face perception and social judgment, motivation and goal pursuit, conformity and behavioral contagion, embodied cognition, and the emergence of higher-level automatic processes in early childhood. Taken together, recent work in these domains demonstrates that automaticity does not result exclusively from a process of skill acquisition (in which a process always begins as a conscious and deliberate one, becoming capable of automatic operation only with frequent use) - there are evolved substrates and early childhood learning mechanisms involved as well.

  10. Automatic acquisition of pattern collocations in GO

    Institute of Scientific and Technical Information of China (English)

    LIU Zhi-qing; DOU Qing; LI Wen-hong; LU Ben-jie


    The quality, quantity, and consistency of the knowledgeused in GO-playing programs often determine their strengths,and automatic acquisition of large amounts of high-quality andconsistent GO knowledge is crucial for successful GO playing.In a previous article of this subject, we have presented analgorithm for efficient and automatic acquisition of spatialpatterns of GO as well as their frequency of occurrence fromgame records. In this article, we present two algorithms, one forefficient and automatic acquisition of pairs of spatial patternsthat appear jointly in a local context, and the other for deter-mining whether the joint pattern appearances are of certainsignificance statistically and not just a coincidence. Results ofthe two algorithms include 1 779 966 pairs of spatial patternsacquired automatically from 16 067 game records of profess-sional GO players, of which about 99.8% are qualified as patterncollocations with a statistical confidence of 99.5% or higher.

  11. 2014 United States Automatic Identification System Database (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The 2014 United States Automatic Identification System Database contains vessel traffic data for planning purposes within the U.S. coastal waters. The database is...

  12. Natural language processing techniques for automatic test ...

    African Journals Online (AJOL)

    Journal of Computer Science and Its Application ... The questions were generated by first extracting the text from the materials supplied by the ... Keywords: Discourse Connectives, Machine Learning, Automatic Test Generation E-Learning.

  13. Automatic identification for standing tree limb pruning

    Institute of Scientific and Technical Information of China (English)

    Sun Renshan; Li Wenbin; Tian Yongchen; Hua Li


    To meet the demand of automatic pruning machines,this paper presents a new method for dynamic automatic identification of standing tree limbs and capture of the digital images of Platycladus orientalis.Methods of computer vision,image processing and wavelet analysis technology were used to compress,filter,segment,abate noise and capture the outline of the picture.We then present the arithmetic for dynamic automatic identification of standing tree limbs,extracting basic growth characteristics of the standing trees such as the form,size,degree of bending and their relative spatial position.We use pattern recognition technology to confirm the proportionate relationship matching the database and thus achieve the goal of dynamic automatic identification of standing tree limbs.

  14. 2009 United States Automatic Identification System Database (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The 2009 United States Automatic Identification System Database contains vessel traffic data for planning purposes within the U.S. coastal waters. The database is...

  15. A Demonstration of Automatically Switched Optical Network

    Institute of Scientific and Technical Information of China (English)


    We build an automatically switched optical network (ASON) testbed with four optical cross-connect nodes. Many fundamental ASON features are demonstrated, which is implemented by control protocols based on generalized multi-protocol label switching (GMPLS) framework.

  16. 2011 United States Automatic Identification System Database (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The 2011 United States Automatic Identification System Database contains vessel traffic data for planning purposes within the U.S. coastal waters. The database is...

  17. 2012 United States Automatic Identification System Database (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The 2012 United States Automatic Identification System Database contains vessel traffic data for planning purposes within the U.S. coastal waters. The database is...

  18. Automatic Classification of Interplanetary Dust Particles (United States)

    Lasue, J.; Stepinski, T. F.; Bell, S. W.


    We present an automatic classification of the IDPs collected by NASA-JSC based on their EDS spectra. Agglomerative clustering and the Sammon's map algorithms are used to visualize relationships between the clusters.

  19. Weierstrass polynomials for links

    DEFF Research Database (Denmark)

    Hansen, Vagn Lundsgaard


    There is a natural way of identifying links in3-space with polynomial covering spaces over thecircle. Thereby any link in 3-space can be definedby a Weierstrass polynomial over the circle. Theequivalence relation for covering spaces over thecircle is, however, completely different from...... that for links in 3-space. This paper initiates a study of the connections between polynomial covering spaces over the circle and links in 3-space....

  20. Characteristics of high-quality HfSiON gate dielectric prepared by physical vapour deposition

    Institute of Scientific and Technical Information of China (English)

    Xu Gao-Bo; Xu Qiu-Xia


    This paper presents a method using simple physical vapour deposition to form high-quality hafnium silicon oxyni-tride (HfSiON) on ultrathin SiO2 buffer layer. The gate dielectric with 10A (1/A = 0.1 nm) equivalent oxide thickness is obtained. The experimental results indicate that the prepared HfSiON gate dielectric exhibits good physical and electrical characteristics, including very good thermal stability up to 1000℃, excellent interface properties, high dielec-tric constant (k = 14) and low gate-leakage current (Ig= 1.9×10-3 A/cm2@Vg = Vfb-1V for EOT of 10A). TaN metal gate electrode is integrated with the HfSiON gate dielectric.The effective work function of TaN on HfSiON is 4.3eV, meeting the requirements of NMOS for the metal gate. And, the impacts of sputtering ambient and annealing temperature on the electrical properties of HfSiON gate dielectric are investigated.