WorldWideScience

Sample records for hf aqueous solution

  1. Sorption behaviour of rutherfordium and thorium from HCl/HF containing aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Schumann, D.; Nitsche, H. [Technische Univ. Dresden (Germany). Inst. fuer Analytische Chemie; Taut, S. [Institut fuer Radiochemie, FZ Rossendorf (Germany); Jost, D.T.; Gaeggeler, H.W. [Labor fuer Radio- und Umweltchemie, PSI Villigen (Switzerland); Yakushev, A.B.; Buklanov, G.V.; Domanov, V.P.; Lien Din Thi [Flerov Laboratory of Nuclear Reactions, JINR Dubna (Russian Federation); Kubica, B.; Misiak, R.; Szeglowski, Z. [H. Niewodniczanski Institute of Nuclear Physics, Krakow (Poland)

    1998-06-12

    The sorption was studied of element 104 (rutherfordium, Rf) and thorium on the strongly acidic cation exchanger DOWEX 50 x 8. The experiments were carried out on-line. Rf is strongly retained on cation exchange resins from diluted HCl/HF solutions in a concentration range of 0.05 to 0.1 M HCl and HF concentrations up to 0.01 M. This behaviour is similar to its pseudohomologue thorium and very different from its lighter homologue hafnium which is desorbed from DOWEX 50 x 8 at HF concentrations above 10{sup -3} M. The tested ion exchange system is suitable for fast on-line separation of element 106 (seaborgium, Sg) from all other contaminations and its decay product Rf. It, therefore, allows the indirect identification of Sg. (orig.) 12 refs.

  2. Resistless photochemical etching of a silicon wafer by UV laser with an H2O2 and HF aqueous solution

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A new resistless etching method has been developed for Silicon wafers. This new method uses an aqueous solution consisting of hydrogen peroxide (H2O2) and hydrogen fluoride (HF) as the activating etchants. A 193 nm ArF excimer laser and a 266 nm fourth harmonic generation Nd:YAG laser were used as the photon sources. Results showed that pattern etching has been achieved without any photoresist film. In the case of the 193 nm laser, the optimal etching appeared at a 1.3 H2O2/HF ratio, where an etch depth of 210 nm was achieved with a fluence of 29 mJ/cm2 and shot number of 10000. At the same conditions, the etch depth with H2O2 and HF solution was three times of that by using H2O and HF mixture. In the case of the 266 nm Nd:YAG laser, the optimal etching appeared at twice ratio of H2O2/HF, where the etch depth of 420 nm was achieved with a fluence of 12 mJ/cm2 and shot number of 30000. Results showed that the etch effect of the 266 nm Nd: YAG laser was more desirable than that of the 193 nm ArF excimer laser.``Keyords: UV laser, resistless photochemical etching, hydrogen peroxide (H2O2).

  3. Decolorization and degradation of reactive yellow HF aqueous solutions by electrochemical advanced oxidation processes.

    Science.gov (United States)

    Bedolla-Guzman, A; Feria-Reyes, R; Gutierrez-Granados, S; Peralta-Hernández, Juan M

    2017-05-01

    Textile manufacturing is the one responsible for water bodies' contamination through the discharge of colored wastes. This work presents the study of reactive yellow HF (RYHF) dye degradation under two different electrochemical advanced oxidation processes (EAOP), namely anodic oxidation (AO) and electro-Fenton (EF)/boron-doped diamond (BDD) process. For the AO, 100 and 300 mg/L solutions using Pt and BDD as anodes in a 100 mL stirred tank cell were used, with a supporting electrolyte of 0.05 mol/L of Na2SO4 at pH 3 under 30 and 50 mA/cm(2) current density. The EF/BDD process was carried out in a flow reactor at 4 and 7 L/min to degrade 100, 200, and 300 mg/L RYHF solutions under 50 and 80 mA/cm(2). UV-Vis determinations were used for decolorization evaluation, while high-performance liquid chromatography (HPLC) method provided information on dye degradation rate.

  4. First results on the sorption behaviour of Rutherfordium from HCl/HF containing aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Schumann, D.; Nitsche, H. [Technische Univ. Dresden (Germany); Taut, S. [Forschungszentrum Rossendorf e.V. (FZR), Dresden (Germany); Jost, D.T.; Gaeggeler, H.W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Yakushev, A.B.; Buklanov, G.V.; Domanov, V.P.; Lien Din Thi [Joint Inst. for Nuclear Research, Dubna (Russian Federation); Kubica, B.; Misiak, R.; Szeglowski, Z. [NINP Cracow (Poland)

    1997-09-01

    Rutherfordium shows strong sorption on the cation exchanger DOWEX 50x8 at a concentration of 0.1 M HCl/10{sup -2} M HF. This shows that Rf behaves under these conditions differently from Hf and Zr and more like Th under these conditions. (author) 1 fig., 5 refs.

  5. Characterization of stain etched p-type silicon in aqueous HF solutions containing HNO{sub 3} or KMnO{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Mogoda, A.S., E-mail: awad_mogoda@hotmail.com [Department of Chemistry, Faculty of Science, Cairo University, Giza (Egypt); Ahmad, Y.H.; Badawy, W.A. [Department of Chemistry, Faculty of Science, Cairo University, Giza (Egypt)

    2011-04-15

    Research highlights: {yields} Stain etching of p-Si in aqueous HF solutions containing HNO{sub 3} or KMnO{sub 4} was investigated. {yields} The electrical conductivity of the etched Si surfaces was measured using impedance technique. {yields} Scanning electron microscope and energy disperse X-ray were used to analyze the etched surfaces. {yields} Etching in aqueous HF solution containing HNO{sub 3} led to formation of a porous silicon layer. {yields} The formation of the porous silicon layer in HF/KMnO{sub 4} was accompanied by deposition of K{sub 2}SiF{sub 6} on the pores surfaces. - Abstract: Stain etching of p-type silicon in hydrofluoric acid solutions containing nitric acid or potassium permanganate as an oxidizing agent has been examined. The effects of etching time, oxidizing agent and HF concentrations on the electrochemical behavior of etched silicon surfaces have been investigated by electrochemical impedance spectroscopy (EIS). An electrical equivalent circuit was used for fitting the impedance data. The morphology and the chemical composition of the etched Si surface were studied using scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) techniques, respectively. A porous silicon layer was formed on Si etched in HF solutions containing HNO{sub 3}, while etching in HF solutions containing KMnO{sub 4} led to the formation of a porous layer and simultaneous deposition of K{sub 2}SiF{sub 6} inside the pores. The thickness of K{sub 2}SiF{sub 6} layer increases with increasing the KMnO{sub 4} concentration and decreases as the concentration of HF increases.

  6. Au-assisted electroless etching of silicon in aqueous HF/H{sub 2}O{sub 2} solution

    Energy Technology Data Exchange (ETDEWEB)

    Megouda, Nacera [Faculte des Sciences, Universite Mouloud Mammeri, Tizi-Ouzou (Algeria); Hadjersi, Toufik, E-mail: hadjersi@yahoo.com [Unite de Developpement de la Technologie du Silicium (UDTS), 2, Bd. Frantz Fanon, B.P. 140 Alger-7 merveilles, Alger (Algeria); Piret, Gaelle; Boukherroub, Rabah [Institut de Recherche Interdisciplinaire (IRI, USR 3078) and Institut d' Electronique, de Microelectronique et de Nanotechnologie (IEMN, CNRS-8520), Cite Scientifique, Avenue Poincare - B.P. 60069, 59652 Villeneuve d' Ascq (France); Elkechai, Omar [Faculte des Sciences, Universite Mouloud Mammeri, Tizi-Ouzou (Algeria)

    2009-04-01

    The Au-assisted electroless etching of p-type silicon substrate in HF/H{sub 2}O{sub 2} solution at 50 deg. C was investigated. The dependence of the crystallographic orientation, the concentration of etching solution and the silicon resistivity on morphology of etched layer was studied. The layers formed on silicon were investigated by scanning electron microscopy (SEM). It was demonstrated that although the deposited Au on silicon is a continuous film, it can produce a layer of silicon nanowires or macropores depending on the used solution concentration.

  7. Synthesis of ZrO2-HfO2-Y2O3-Sc2O3 Nano-Particles by Sol-Gel Technique in Aqueous Solution of Alcohol

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Agglomeration-free nanosized ZrO2-HfO2-Y2O3-Sc2O3 composite powders were successfully synthesized by Sol-Gel technique in heated aqueous solution of alcohol, using analytically pure ZrOCl2·8H2O, HfOCl2·8H2O, Y(NO3)3·6H2O, and Sc2O3 as raw materials. The effect of synthesis condition on the size and dispersity of the composite powders was investigated by means of XRD, TEM, and TG-DSC techniques. The results showed that well-dispersed predecessor of ZrO2-HfO2-Y2O3-Sc2O3 composite nanopowders could be obtained. The optional condition: PEG6000 as dispersant was 1%, alcohol/H2O ratio was 5/1, metallic ion concentration in whole solution was 0.5 mol·L-1 and the pH value of the solution was 12. After calcined at 620 ℃, the powder obtained was in uniform cubic structure, and its average particle size was about 13 nm, which was good for producing nanocrystalline solid electrolyte.

  8. Treatment of Aqueous Solutions

    NARCIS (Netherlands)

    Van Spronsen, J.; Witkamp, G.J.

    2013-01-01

    The invention is directed to a process for the recovery or removal of one or more crystallizable compounds from an aqueous solution containing, apart from the said crystallizable compounds, one or more organic or inorganic scale- forming or scale-inducing materials having a lower solubility in water

  9. 2010 Water & Aqueous Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Dor Ben-Amotz

    2010-08-13

    Water covers more than two thirds of the surface of the Earth and about the same fraction of water forms the total mass of a human body. Since the early days of our civilization water has also been in the focus of technological developments, starting from converting it to wine to more modern achievements. The meeting will focus on recent advances in experimental, theoretical, and computational understanding of the behavior of the most important and fascinating liquid in a variety of situations and applications. The emphasis will be less on water properties per se than on water as a medium in which fundamental dynamic and reactive processes take place. In the following sessions, speakers will discuss the latest breakthroughs in unraveling these processes at the molecular level: Water in Solutions; Water in Motion I and II; Water in Biology I and II; Water in the Environment I and II; Water in Confined Geometries and Water in Discussion (keynote lecture and poster winners presentations).

  10. Formation of aligned silicon nanowire on silicon by electroless etching in HF solution

    Energy Technology Data Exchange (ETDEWEB)

    Megouda, N.; Douani, R. [Faculte des Sciences, Universite Mouloud Mammeri, Tizi-Ouzou (Algeria); Hadjersi, T., E-mail: hadjersi@yahoo.co [Unite de Developpement de la Technologie du Silicium (UDTS), 2, Bd. Frantz Fanon, B.P. 140 Alger-7 merveilles, Alger (Algeria); Boukherroub, R. [Institut de Recherche Interdisciplinaire (IRI, FRE 2963), Institut d' Electronique, de Microelectronique et de Nanotechnologie (IEMN, CNRS-8520), Cite Scientifique, Avenue Poincare-B.P. 60069, 59652 Villeneuve d' Ascq (France)

    2009-12-15

    It was demonstrated that the etching in HF-based aqueous solution containing AgNO{sub 3} and Na{sub 2}S{sub 2}O{sub 8} as oxidizing agents or by Au-assisted electroless etching in HF/H{sub 2}O{sub 2} solution at 50 deg. C yields films composed of aligned Si nanowire (SiNW). SiNW of diameters {approx}10 nm were formed. The morphology and the photoluminescence (PL) of the etched layer as a function of etching solution composition were studied. The SiNW layers formed on silicon were investigated by scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) and photoluminescence. It was demonstrated that the morphology and the photoluminescence of the etched layers strongly depends on the type of etching solution. Finally, a discussion on the formation process of the silicon nanowires is presented.

  11. Angular correlation of annihilation photons in frozen aqueous solutions

    DEFF Research Database (Denmark)

    Milosevic-Kvajic, M.; Mogensen, O. E.; Kvajic, G.

    1972-01-01

    Linear‐slit angular correlation curves were obtained at about −140°C for frozen aqueous solutions of HF, HCl, HBr, HI, NH3, FeCl2, FeCl3, NaI, H2SO4, NHO3, MnSO4, KMnO4, K2Cr2O7, NaOH, and LiOH. We found no appreciable influence of a 4% concentration of the last seven impurities. Only halide‐cont...

  12. Formation of aligned silicon-nanowire on silicon in aqueous HF/(AgNO{sub 3} + Na{sub 2}S{sub 2}O{sub 8}) solution

    Energy Technology Data Exchange (ETDEWEB)

    Douani, R. [Faculte des Sciences, Universite Mouloud Mammeri, Tizi-Ouzou (Algeria); Hadjersi, T. [Unite de Developpement de la Technologie du Silicium (UDTS), 2, Bd. Frantz Fanon, B.P. 140 Alger-7 merveilles, Alger (Algeria)], E-mail: hadjersi@yahoo.com; Boukherroub, R. [Institut de Recherche Interdisciplinaire (IRI, FRE 2963) and Institut d' Electronique, de Microelectronique et de Nanotechnologie (IEMN, CNRS-8520), Cite Scientifique, Avenue Poincare - B.P. 60069, 59652 Villeneuve d' Ascq (France); Adour, L. [Faculte des Sciences, Universite Mouloud Mammeri, Tizi-Ouzou (Algeria); Manseri, A. [Unite de Developpement de la Technologie du Silicium (UDTS), 2, Bd. Frantz Fanon, B.P. 140 Alger-7 merveilles, Alger (Algeria)

    2008-09-15

    Highly oriented silicon nanowire (SiNW) layer was fabricated by etching Si substrate in HF/(AgNO{sub 3} + Na{sub 2}S{sub 2}O{sub 8}) solution at 50 deg. C. The morphology and the photoluminescence (PL) of the etched layer as a function of Na{sub 2}S{sub 2}O{sub 8} concentration were studied. The SiNW layers formed on silicon were investigated by scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). It was demonstrated that the morphology of the etched layers depends on the Na{sub 2}S{sub 2}O{sub 8} concentration. Room-temperature photoluminescence (PL) from etched layer was observed. It was found that the utilisation of Na{sub 2}S{sub 2}O{sub 8} decreases PL peak intensity. Finally, a discussion on the formation process of the silicon nanowires is presented.

  13. Formation of a-Si:H and a-Si{sub 1-x}C{sub x} :H nanowires by Ag-assisted electroless etching in aqueous HF/AgNO{sub 3} solution

    Energy Technology Data Exchange (ETDEWEB)

    Douani, Rachida [Faculte des Sciences, Universite Mouloud Mammeri, Tizi-Ouzou (Algeria); Piret, Gaelle, E-mail: gaelle.offranc@polytechnique.edu [Physique de la Matiere Condensee, Ecole Polytechnique, CNRS, 91128 Palaiseau (France); Hadjersi, Toufik [Unite de Developpement de la Technologie du Silicium (UDTS), 2, Bd. Frantz Fanon, B.P. 140 Alger-7 merveilles, Algiers (Algeria); Chazalviel, Jean-Noel; Solomon, Ionel [Physique de la Matiere Condensee, Ecole Polytechnique, CNRS, 91128 Palaiseau (France)

    2011-06-01

    The formation of hydrogenated amorphous silicon-carbon alloy (a-Si{sub 1-x}C{sub x}:H) nanowires is studied for different carbon concentrations (0-7%) by using Ag-assisted electroless etching of the thin a-Si{sub 1-x}C{sub x}:H films deposited by plasma-enhanced chemical vapour deposition from silane/methane gas mixtures. The nanowires morphologies (length, density, ...), studied by scanning electron microscopy, strongly depend on the concentration of the etchant (aqueous solution of hydrofluoric acid and silver nitrate), the etching time, and the carbon concentration of the deposited layer.

  14. Fabrication of silicon nanowire arrays by macroscopic galvanic cell-driven metal catalyzed electroless etching in aerated HF solution.

    Science.gov (United States)

    Liu, Lin; Peng, Kui-Qing; Hu, Ya; Wu, Xiao-Ling; Lee, Shuit-Tong

    2014-03-05

    Macroscopic galvanic cell-driven metal catalyzed electroless etching (MCEE) of silicon in aqueous hydrofluoric acid (HF) solution is devised to fabricate silicon nanowire (SiNW) arrays with dissolved oxygen acting as the one and only oxidizing agent. The key aspect of this strategy is the use of a graphite or other noble metal electrode that is electrically coupled with silicon substrate.

  15. Quinoxaline ozonation in aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Andreozzi, R.; Caprio, V.; D' Amore, M.G.; Insola, A. (Universita di Napoli (Italy))

    The oxidation of quinoxaline by ozone in aqueous solution is investigated. The chemical and kinetic evolution of the oxidation process at varying pH are followed by means of semi-batch and batch ozonation experiments. Results indicate that quinoxaline ozonation can develop according to both radical and ionic mechanisms whose relative occurrence can be varied by means of addition to the reacting system of radical scavengers or ozone decomposition promoters. It is shown that each mechanism involves an initial attack of ozone to both the homocyclic and heterocyclic rings of quinoxaline. Pyrazinedicarboxylic acid is formed as a stable final product in ionic ozonation, whereas it appears as an intermediate still reactive towards ozone in radical ozonation. Despite this, the radical ozonation of quinoxaline appears to be more selective than ionic ozonation with respect to production of pyrazinedicarboxylic acid. Reaction schemes are proposed to account for the observed kinetic behaviors and product formations. Oxidation experiments have also been extended to pyrazine, and its sensitivity to only radical ozonation is shown.

  16. Coalescence of silver clusters by immersion in diluted HF solution

    Energy Technology Data Exchange (ETDEWEB)

    Milazzo, R. G.; Mio, A. M.; D’Arrigo, G.; Spinella, C. [CNR-IMM Institute for Microelectronics and Microsystems, I-95121 Catania (Italy); Grimaldi, M. G. [Department of Physics and Astronomy, Università di Catania, I-95123 Catania (Italy); MATIS IMM-CNR, I-95123 Catania (Italy); Rimini, E. [CNR-IMM Institute for Microelectronics and Microsystems, I-95121 Catania (Italy); Department of Physics and Astronomy, Università di Catania, I-95123 Catania (Italy)

    2015-07-14

    The galvanic displacement deposition of silver on H-terminated Si (100) in the time scale of seconds is instantaneous and characterized by a cluster density of 10{sup 11}-10{sup 12} cm{sup −2}. The amount of deposited Ag follows a t{sup 1/2} dependence in agreement with a Cottrell diffusion limited mechanism. At the same time, during the deposition, the cluster density reduces by a factor 5. This behavior is in contrast with the assumption of immobile clusters. We show in the present work that coalescence and aggregation occur also in the samples immersed in the diluted hydrofluoric acid (HF) solution without the presence of Ag{sup +}. Clusters agglomerate according to a process of dynamic coalescence, typical of colloids, followed by atomic redistribution at the contact regions with the generation of multiple internal twins and stacking-faults. The normalized size distributions in terms of r/r{sub mean} follow also the prediction of the Smoluchowski ripening mechanism. No variation of the cluster density occurs for samples immersed in pure H{sub 2}O solution. The different behavior might be associated to the strong attraction of clusters to oxide-terminated Si surface in presence of water. The silver clusters are instead weakly bound to hydrophobic H-terminated Si in presence of HF. HF causes then the detachment of clusters and a random movement on the silicon surface with mobility of about 10{sup −13} cm{sup 2}/s. Attractive interaction (probably van der Waals) among particles promotes coarsening.

  17. Calorimetric studies of macromolecular aqueous solutions

    NARCIS (Netherlands)

    Blandamer, M.J; Cullis, P.M.; Engberts, J.B.F.N.

    1996-01-01

    Both titration and differential scanning microcalorimetric techniques are shown to yield important information concerning the properties of macromolecules in aqueous solution. Application of titration calorimetry is examined in me context of deaggregation of canonic micelles (e.g. hexadecyltrimethyl

  18. REMOVAL OF CADMIUM FROM AQUEOUS SOLUTION USING ...

    African Journals Online (AJOL)

    been identified as the best products [4]. Though little work has ... synthesized products for the removal of cadmium ion from aqueous solution. ... absence of suspect anions such as nitrate and chloride from the reagents used, which could be.

  19. Thermodynamic properties of potassium chloride aqueous solutions

    Science.gov (United States)

    Zezin, Denis; Driesner, Thomas

    2017-04-01

    Potassium chloride is a ubiquitous salt in natural fluids, being the second most abundant dissolved salt in many geological aqueous solutions after sodium chloride. It is a simple solute and strong electrolyte easily dissociating in water, however the thermodynamic properties of KCl aqueous solutions were never correlated with sufficient accuracy for a wide range of physicochemical conditions. In this communication we propose a set of parameters for a Pitzer-type model which allows calculation of all necessary thermodynamic properties of KCl solution, namely excess Gibbs free energy and derived activity coefficient, apparent molar enthalpy, heat capacity and volume, as well as osmotic coefficient and activity of water in solutions. The system KCl-water is one of the best studied aqueous systems containing electrolytes. Although extensive experimental data were collected for thermodynamic properties of these solutions over the years, the accurate volumetric data became available only recently, thus making possible a complete thermodynamic formulation including a pressure dependence of excess Gibbs free energy and derived properties of the KCl-water liquids. Our proposed model is intended for calculation of major thermodynamic properties of KCl aqueous solutions at temperatures ranging from freezing point of a solution to 623 K, pressures ranging from saturated water vapor up to 150 MPa, and concentrations up to the salt saturation. This parameterized model will be further implemented in geochemical software packages and can facilitate the calculation of aqueous equilibrium for reactive transport codes.

  20. Precipitation of neptunium dioxide from aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, K E

    1999-12-01

    Tens of thousands of metric tons of highly radioactive, nuclear waste have been generated in the US. Currently, there is no treatment or disposal facility for these wastes. Of the radioactive elements in high-level nuclear waste, neptunium (Np) is of particular concern because it has a long half-life and may potentially be very mobile in groundwaters associated with a proposed underground disposal site at Yucca Mountain, Nevada. Aqueous Np concentrations observed in previous, short-term solubility experiments led to calculated potential doses exceeding proposed long-term regulatory limits. However, thermodynamic data for Np at 25 C showed that these observed aqueous Np concentrations were supersaturated with respect to crystalline NpO{sub 2}. It was hypothesized that NpO{sub 2} is the thermodynamically stable solid phase in aqueous solution, but it is slow to form in an aqueous solution of NpO{sub 2}{sup +} on the time scale of previous experiments. The precipitation of NpO{sub 2} would provide significantly lower aqueous Np concentrations leading to calculated doses below proposed regulatory limits. To test this hypothesis, solubility experiments were performed at elevated temperature to accelerate any slow precipitation kinetics. Ionic NpO{sub 2}{sup +} (aq) was introduced into very dilute aqueous solutions of NaCl with initial pH values ranging from 6 to 10. The reaction vessels were placed in an oven and allowed to react at 200 C until steady-state aqueous Np concentrations were observed. In all cases, aqueous Np concentrations decreased significantly from the initial value of 10{sup {minus}4} M. The solids that formed were analyzed by x-ray powder diffraction, x-ray absorption spectroscopy, and scanning electron microscopy. The solids were determined to be high-purity crystals of NpO{sub 2}. This is the first time that crystalline NpO{sub 2} has been observed to precipitate from NpO{sub 2}{sup +}(aq) in near-neutral aqueous solutions. The results obtained

  1. Aqueous Solution Chemistry of Plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Clark, David L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-01-28

    Things I have learned working with plutonium: Chemistry of plutonium is complex; Redox equilibria make Pu solution chemistry particularly challenging in the absence of complexing ligands; Understanding this behavior is key to successful Pu chemistry experiments; There is no suitable chemical analog for plutonium.

  2. Hydrophobic Solvation: Aqueous Methane Solutions

    Science.gov (United States)

    Konrod, Oliver; Lankau, Timm

    2007-01-01

    A basic introduction to concept of a solvation shell around an apolar solute as well as its detection is presented. The hydrophobic solvation of toluene is found to be a good teaching example which connects macroscopic, phenomenological thermodynamic results with an atomistic point of view.

  3. Hydrophobic Solvation: Aqueous Methane Solutions

    Science.gov (United States)

    Konrod, Oliver; Lankau, Timm

    2007-01-01

    A basic introduction to concept of a solvation shell around an apolar solute as well as its detection is presented. The hydrophobic solvation of toluene is found to be a good teaching example which connects macroscopic, phenomenological thermodynamic results with an atomistic point of view.

  4. Aqueous Solution Chemistry on Mars

    Science.gov (United States)

    Quinn, R.; Hecht, M.; Kounaves, S.; Young, S.; West, S.; Fisher, A.; Grunthaner, P.

    2007-12-01

    Currently en route to Mars, the Phoenix mission carries four wet chemistry cells designed to perform basic solution chemistry on martian soil. The measurement objectives are typical of those that would be performed on an unknown sample on Earth, including detection of common anions and cations, total conductivity, pH, redox potential, cyclic voltammetry (CV), etc. Both the challenge and the novelty arise from the necessity to perform these measurements with severely constrained resources in a harsh and (literally) alien environment. Sensors for all measurements are integrated into a common "beaker," with the ability to perform a two-point calibration of some sensors using a pair of low-concentration solutions. Sulfate measurement is performed with a crude titration. While most measurements use ion selective electrodes, halide interferences are resolved by independent chronopotentiometry (CP) measurements. No preconditioning of the soil-water mixture is possible, nor is any physical characterization of the introduced soil sample beyond coarse visual inspection. Among the idiosyncrasies of the measurement is the low external pressure, which requires that the analysis be performed close to the boiling point of water under an atmosphere consisting almost entirely of water vapor. Despite these liabilities, however, extensive laboratory characterization has validated the basic approach, and protocols for both CV and CP have been developed and tested. Enhancing the value of the measurement is the suite of coordinated observations, such as microscopy and evolved gas analysis, to be performed by other Phoenix instruments.

  5. Recognition of caffeine in aqueous solutions

    NARCIS (Netherlands)

    Fiammengo, R.; Crego Calama, Mercedes; Timmerman, P.; Reinhoudt, David

    2003-01-01

    Binding of caffeine in aqueous solutions has been achieved for the first time by using water-soluble, tetracationic peptide-porphyrin conjugates Zn-1 as the receptor molecules. The association constant for caffeine with receptor Zn-1 is in some cases as high as 6000 M-1, only 5-6 times lower than

  6. Water & Aqueous Solutions. Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-08-09

    The Gordon Research Conference (GRC) on Water & Aqueous Solutions was held at Holderness School, New Hampshire, 8/4/02 thru 8/9/02. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

  7. Aqueous solutions of ionic liquids: microscopic assembly

    NARCIS (Netherlands)

    Vicent-Luna, J.M.; Dubbeldam, D.; Gómez-Álvarez, P.; Calero, S.

    2016-01-01

    Aqueous solutions of ionic liquids are of special interest, due to the distinctive properties of ionic liquids, in particular, their amphiphilic character. A better understanding of the structure-property relationships of such systems is hence desirable. One of the crucial molecular-level

  8. High-Frequency Electron Paramagnetic Resonance Spectroscopy of Nitroxide-Functionalized Nanodiamonds in Aqueous Solution.

    Science.gov (United States)

    Akiel, R D; Stepanov, V; Takahashi, S

    2016-06-21

    Nanodiamond (ND) is an attractive class of nanomaterial for fluorescent labeling, magnetic sensing of biological molecules, and targeted drug delivery. Many of those applications require tethering of target biological molecules on the ND surface. Even though many approaches have been developed to attach macromolecules to the ND surface, it remains challenging to characterize dynamics of tethered molecule. Here, we show high-frequency electron paramagnetic resonance (HF EPR) spectroscopy of nitroxide-functionalized NDs. Nitroxide radical is a commonly used spin label to investigate dynamics of biological molecules. In the investigation, we developed a sample holder to overcome water absorption of HF microwave. Then, we demonstrated HF EPR spectroscopy of nitroxide-functionalized NDs in aqueous solution and showed clear spectral distinction of ND and nitroxide EPR signals. Moreover, through EPR spectral analysis, we investigate dynamics of nitroxide radicals on the ND surface. The demonstration sheds light on the use of HF EPR spectroscopy to investigate biological molecule-functionalized nanoparticles.

  9. Exclusion of Nitrate from Frozen Aqueous Solutions

    Science.gov (United States)

    Marrocco, H. A.; Michelsen, R. R.

    2013-12-01

    Reactions occurring at the surface of ice, sea ice, and snow in Earth's cryosphere have an impact on the composition of the overlying atmosphere. In order to elucidate reaction mechanisms and model their contributions to atmospheric processes, the morphology of frozen aqueous surfaces and amounts of reactants contained therein must be determined. To this end, the exclusion of nitrate ions to the surface of frozen aqueous solutions has been studied by attenuated total reflection infrared spectroscopy (ATR-IR). In this technique the near-surface region of the frozen films are interrogated to a depth of a few hundred nanometers from the film-crystal interface. Aqueous solutions (0.001 to 0.01 M) of sodium nitrate (NaNO3), magnesium nitrate (Mg(NO3)2), and nitric acid (HNO3) were quickly frozen on the germanium ATR crystal and observed at a constant temperature of about -18°C. In addition to ice and the solutes, liquid water in varying amounts was observed in the spectra. The amount of nitrate in the surface liquid is three to four orders of magnitude higher than in the unfrozen solution. While all the nitrate salts exhibit exclusion to the unfrozen surface, the dynamics are different for different counter-ions. Results are compared to freezing point depression data and the predictions of equilibrium thermodynamics.

  10. Zeolites as alcohol adsorbents from aqueous solutions

    Directory of Open Access Journals (Sweden)

    Cekova Blagica

    2006-01-01

    Full Text Available The potential usage of zeolites as adsorbents for the removal of organic molecules from water was investigated in a series of experiments with aqueous solutions of lower alcohols. This could represent a simple solution to the problem of cleaning up industrial wastewater as well as recovering valuable chemicals at relatively low costs. Adsorption isotherms of the Langmuir type were applied, and calculations showed that the amount of propanol adsorbed on silicalite corresponded to approximately 70% of the pore volume. The adsorption process is simple, and recovery of the more concentrated products is easily done by heat treatment and/or at lowered pressures. Adsorption experiments with aqueous acetone showed that silicalite had approximately the same adsorption capacity for acetone as for n-propanol. Heats of adsorption were determined calorimetrically.

  11. Aqueous solution dispersement of carbon nanotubes

    Science.gov (United States)

    Kim, Jae-Woo (Inventor); Park, Cheol (Inventor); Choi, Sang H. (Inventor); Lillehei, Peter T. (Inventor); Harrison, Joycelyn S. (Inventor)

    2011-01-01

    Carbon nanotubes (CNTs) are dispersed in an aqueous buffer solution consisting of at least 50 weight percent water and a remainder weight percent that includes a buffer material. The buffer material has a molecular structure defined by a first end, a second end, and a middle disposed between the first and second ends. The first end is a cyclic ring with nitrogen and oxygen heteroatomes, the middle is a hydrophobic alkyl chain, and the second end is a charged group.

  12. OPTICAL PROPERTIES OF CARBAMIDE AQUEOUS SOLUTIONS

    Directory of Open Access Journals (Sweden)

    E. V. Avramenko

    2016-03-01

    Full Text Available Subject of Research. The paper presents the results of measurements of refractometric properties (refractive index n, its temperature factor dn/dt and the ultraviolet spectral absorption in carbonic acid diamide aqueous solutions (carbamide depending on solid residue mass fraction md = 0-50 % and on temperaturet = 10-70 °C.Method of Research. Laboratory methods ofliquid-phase medium refractometry and ultraviolet spectrophotometry were applied for the research. We carried out computational modeling of electronic states spectrum for the carbonic acid diamide molecule and theoretical calculation of the fundamental electronic absorption of the molecule in the ultraviolet wavelenght region.Main Results. We have established that the solution concentration md has a nonlinear character and may be represented by the quadratic polynomial with the error Δn= ± 0,0005. We have shown the refractive indexdependence on temperature n(t changes in linear fashion att = 10-70 °C.At that, the inclination of lines n(t increases at the increase of md; so, the temperature factor dn/dt may be approximated by the quadratic polynomial. Transmission spectra of solutions in the spectral region λ= 225-760 nm have no special features except for the sharp edge in the short-wavelength region; the fundamental electronic absorptionis responsible for it. We have established that dispersion dependences of the refraction index n(λ;md in aqueous solutions of carbamide at λ= 360-760 nm and at md = 0-50 % may be calculated with the satisfactory error without additional adjustable parameters from the ultraviolet absorption data in terms of the one-dimentional oscillator Lorentz model.PracticalRelevance. Representedmeasurements of carbonic acid diamide aqueous solutions optical properties may be applied for the adjustment and calibration of commercial refractometers at processing lines of the AdBlue reagent manufacture for the selective catalytic reduction (SCR of motor transport

  13. Density of aqueous solutions of CO2

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Julio E.

    2001-10-10

    In this report, we present a numerical representation for the partial molar volume of CO2 in water and the calculation of the corresponding aqueous solution density. The motivation behind this work is related to the importance of having accurate representations for aqueous phase properties in the numerical simulation of carbon dioxide disposal into aquifers as well as in geothermal applications. According to reported experimental data the density of aqueous solutions of CO2 can be as much as 2-3% higher than pure water density. This density variation might produce an influence on the groundwater flow regime. For instance, in geologic sequestration of CO2, convective transport mixing might occur when, several years after injection of carbon dioxide has stopped, the CO2-rich gas phase is concentrated at the top of the formation, just below an overlaying caprock. In this particular case the heavier CO2 saturated water will flow downward and will be replaced by water with a lesser CO2 content.

  14. Bentonite for ciprofloxacin removal from aqueous solution.

    Science.gov (United States)

    Genç, Nevim; Can Dogan, Esra; Yurtsever, Meral

    2013-01-01

    Ciprofloxacin hydrochloride (CIP) is the second generation of fluoroquinolone antibiotics whose residues are found in wastewater and surface water. CIP has high aqueous solubility under different pH conditions and high stability in the soil system. In this study, bentonite was used as a potential sorbent for the removal of CIP from aqueous solutions using batch experiments. The effects of various parameters such as contact time, pH, adsorbent dosage, agitation speed, ionic strength and initial concentration of CIP in aqueous solution on the adsorption capacity were investigated. The optimum contact time, pH, agitation speed and adsorbent dosage were found to be 30 min, 4.5 pH, 150 rpm and 2.5 g L(-1), respectively. When the ionic strength was increased from 5 to 50 mM, the adsorption of CIP decreased from 97.8 to 93.4%. The isotherm adsorption data fitted well with the Langmuir model, Kl and qe were found to be 0.27 L mg(-1) and 147.06 mg g(-1), and the data fitted well with the pseudo-second order kinetics, whereby k was found to be 2.19 g mg(-1) h(-1).

  15. Radiation-induced nitration of organic compounds in aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Ershov, B.G.; Gordeev, A.V.; Bykov, G.L. [Russian Academy of Sciences, Moscow (Russian Federation). Frumkin Inst. of Physical Chemistry and Electrochemistry; Moisy, P. [CEA, Bagnols sur Ceze (France). Nuclear Energy Div.

    2012-07-01

    Radiolysis in aqueous nitrate and acetic acid solutions and nitrate/nitric acid and phenol was studied. The radiolysis of these solutes occurs with {sup circle} NO{sup 2} radical, which is the active nitrating agent. Accumulation of nitromethane and nitrite was determined during {gamma}-irradiation of aqueous solutions containing acetic and nitrate solutions. Irradiation of aqueous phenol-nitrate/nitric acid solutions results in the formation of 2- and 4-nitrophenols.

  16. Aqueous Solution Vessel Thermal Model Development II

    Energy Technology Data Exchange (ETDEWEB)

    Buechler, Cynthia Eileen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-10-28

    The work presented in this report is a continuation of the work described in the May 2015 report, “Aqueous Solution Vessel Thermal Model Development”. This computational fluid dynamics (CFD) model aims to predict the temperature and bubble volume fraction in an aqueous solution of uranium. These values affect the reactivity of the fissile solution, so it is important to be able to calculate them and determine their effects on the reaction. Part A of this report describes some of the parameter comparisons performed on the CFD model using Fluent. Part B describes the coupling of the Fluent model with a Monte-Carlo N-Particle (MCNP) neutron transport model. The fuel tank geometry is the same as it was in the May 2015 report, annular with a thickness-to-height ratio of 0.16. An accelerator-driven neutron source provides the excitation for the reaction, and internal and external water cooling channels remove the heat. The model used in this work incorporates the Eulerian multiphase model with lift, wall lubrication, turbulent dispersion and turbulence interaction. The buoyancy-driven flow is modeled using the Boussinesq approximation, and the flow turbulence is determined using the k-ω Shear-Stress-Transport (SST) model. The dispersed turbulence multiphase model is employed to capture the multiphase turbulence effects.

  17. Effects of Modified Precursor Solution on Microstructure of (Y,Yb)MnO3/HfO2/Si

    Science.gov (United States)

    Suzuki, Kazuyuki; Kato, Kazumi

    2007-10-01

    Ferroelectric/insulator/silicon structures were prepared using (Y,Yb)MnO3 films as ferroelectrics and HfO2 thin films as insulators through alkoxy-derived precursor solutions. The HfO2 solution was chemically modified in order to decrease the number of heating cycles required. The HfO2 films prepared using a partially hydrolyzed alkoxide solution had a uniform structure. From the results of measurements of the roughness level and refractive index of the HfO2 films, the partial hydrolysis of the HfO2 solution was found to be effective for the formation of a uniform microstructure in a thin insulator film. (Y,Yb)MnO3/HfO2/Si structures were constructed using the resultant HfO2 thin films prepared using the modified solutions.

  18. An infrared study of thin-film formation on Si and Ge surfaces treated with aqueous NH4F and HF

    Science.gov (United States)

    Yota, J.; Burrows, V. A.

    1991-05-01

    The surface chemistry of Si and Ge after treatment with hydrofluoric acid buffered with ammonium fluoride (BHF) was studied using surface infrared spectroscopy. For each of these materials, the BHF not only dissolved the native oxide, but also deposited a thin inorganic film comprised of ammonium salts (NH4F and NH4F.HF). Through one or more complex reactions with the substrate, these salts slowly disappear as the thermodynamically very stable hexafluorometallate compounds [(NH4)2SiF6 and (NH4)2GeF6] form. The NH4F.HF disappearance correlates directly with the hexafluorometallate formation. Though the original fluoride and bifluoride salts are quite soluble in alcohols as well as in aqueous solutions, the hexafluorometallates are completely insoluble in alcohols, and can only be removed by thorough water rinse.

  19. Peroxide coordination of tellurium in aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Mikhaylov, Alexey A.; Medvedev, Alexander G. [Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of Sciences, Moscow (Russian Federation); The Casali Center of Applied Chemistry, The Institute of Chemistry, The Hebrew University of Jerusalem (Israel); Churakov, Andrei V.; Grishanov, Dmitry A.; Prikhodchenko, Petr V. [Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of Sciences, Moscow (Russian Federation); Lev, Ovadia [The Casali Center of Applied Chemistry, The Institute of Chemistry, The Hebrew University of Jerusalem (Israel)

    2016-02-15

    Tellurium-peroxo complexes in aqueous solutions have never been reported. In this work, ammonium peroxotellurates (NH{sub 4}){sub 4}Te{sub 2}(μ-OO){sub 2}(μ-O)O{sub 4}(OH){sub 2} (1) and (NH{sub 4}){sub 5}Te{sub 2}(μ-OO){sub 2}(μ-O)O{sub 5}(OH).1.28 H{sub 2}O.0.72 H{sub 2}O{sub 2} (2) were isolated from 5 % hydrogen peroxide aqueous solutions of ammonium tellurate and characterized by single-crystal and powder X-ray diffraction analysis, by Raman spectroscopy and thermal analysis. The crystal structure of 1 comprises ammonium cations and a symmetric binuclear peroxotellurate anion [Te{sub 2}(μ-OO){sub 2}(μ-O)O{sub 4}(OH){sub 2}]{sup 4-}. The structure of 2 consists of an unsymmetrical [Te{sub 2}(μ-OO){sub 2}(μ-O)O{sub 5}(OH)]{sup 5-} anion, ammonium cations, hydrogen peroxide, and water. Peroxotellurate anions in both 1 and 2 contain a binuclear Te{sub 2}(μ-OO){sub 2}(μ-O) fragment with one μ-oxo- and two μ-peroxo bridging groups. {sup 125}Te NMR spectroscopic analysis shows that the peroxo bridged bitellurate anions are the dominant species in solution, with 3-40 %wt H{sub 2}O{sub 2} and for pH values above 9. DFT calculations of the peroxotellurate anion confirm its higher thermodynamic stability compared with those of the oxotellurate analogues. This is the first direct evidence for tellurium-peroxide coordination in any aqueous system and the first report of inorganic tellurium-peroxo complexes. General features common to all reported p-block element peroxides could be discerned by the characterization of aqueous and crystalline peroxotellurates. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. Speciation in aqueous solutions of nitric acid.

    Science.gov (United States)

    Hlushak, S; Simonin, J P; De Sio, S; Bernard, O; Ruas, A; Pochon, P; Jan, S; Moisy, P

    2013-02-28

    In this study, speciation in aqueous solutions of nitric acid at 25 °C was assessed in two independent ways. First, Raman experiments were carried out and interpreted in terms of free nitrate ions, ion pairs and neutral HNO(3) molecules. In parallel, a model was developed to account for the formation of these two kinds of pairs. It was based on an extension of the binding mean spherical approximation (BiMSA), or associative MSA (AMSA), in which the size and the charge of the ions in the chemical pair may differ from those of the free ions. A simultaneous fit of the osmotic coefficient and of the proportion of free ions (obtained from Raman spectroscopy experiments) led to an estimation of the speciation in nitric acid solutions. The result obtained using this procedure was compared with the estimation obtained from the Raman experiments.

  1. Pulse Radiolysis of Aqueous Thiocyanate Solution

    Energy Technology Data Exchange (ETDEWEB)

    Milosavljevic, Bratoljub H.; LaVerne, Jay A.

    2005-01-13

    The pulse radiolysis of N2O saturated aqueous solutions of KSCN was studied under neutral pH conditions. The observed optical absorption spectrum of the SCN• radical in solution is more complex than previously reported, but it is in good agreement with that measured in the gas phase. Kinetic traces at 330 nm and 472 nm corresponding to SCN• and (SCN)2•¯, respectively, were fit using a Monte Carlo simulation kinetic model. The rate coefficient for the oxidation of SCN¯ ions by OH radicals, an important reaction used in competition kinetics measurements, was found to be 1.4 ± 0.1 x 1010 M-1 s-1, about 30 % higher than the normally accepted value. A detailed discussion of the reaction mechanism is presented.

  2. Multistep nucleation of nanocrystals in aqueous solution

    Science.gov (United States)

    Loh, N. Duane; Sen, Soumyo; Bosman, Michel; Tan, Shu Fen; Zhong, Jun; Nijhuis, Christian A.; Král, Petr; Matsudaira, Paul; Mirsaidov, Utkur

    2017-01-01

    The nucleation and growth of solids from solutions impacts many natural processes and is fundamental to applications in materials engineering and medicine. For a crystalline solid, the nucleus is a nanoscale cluster of ordered atoms that forms through mechanisms still poorly understood. In particular, it is unclear whether a nucleus forms spontaneously from solution via a single- or multiple-step process. Here, using in situ electron microscopy, we show how gold and silver nanocrystals nucleate from supersaturated aqueous solutions in three distinct steps: spinodal decomposition into solute-rich and solute-poor liquid phases, nucleation of amorphous nanoclusters within the metal-rich liquid phase, followed by crystallization of these amorphous clusters. Our ab initio calculations on gold nucleation suggest that these steps might be associated with strong gold-gold atom coupling and water-mediated metastable gold complexes. The understanding of intermediate steps in nuclei formation has important implications for the formation and growth of both crystalline and amorphous materials.

  3. Aqueous Solutions of Ionic Liquids: Microscopic Assembly.

    Science.gov (United States)

    Vicent-Luna, Jose Manuel; Dubbeldam, David; Gómez-Álvarez, Paula; Calero, Sofia

    2016-02-01

    Aqueous solutions of ionic liquids are of special interest, due to the distinctive properties of ionic liquids, in particular, their amphiphilic character. A better understanding of the structure-property relationships of such systems is hence desirable. One of the crucial molecular-level interactions that influences the macroscopic behavior is hydrogen bonding. In this work, we conduct molecular dynamics simulations to investigate the effects of ionic liquids on the hydrogen-bond network of water in dilute aqueous solutions of ionic liquids with various combinations of cations and anions. Calculations are performed for imidazolium-based cations with alkyl chains of different lengths and for a variety of anions, namely, [Br](-), [NO3](-), [SCN](-) [BF4](-), [PF6](-), and [Tf2N](-). The structure of water and the water-ionic liquid interactions involved in the formation of a heterogeneous network are analyzed by using radial distribution functions and hydrogen-bond statistics. To this end, we employ the geometric criterion of the hydrogen-bond definition and it is shown that the structure of water is sensitive to the amount of ionic liquid and to the anion type. In particular, [SCN](-) and [Tf2N](-) were found to be the most hydrophilic and hydrophobic anions, respectively. Conversely, the cation chain length did not influence the results.

  4. Terahertz absorption of dilute aqueous solutions.

    Science.gov (United States)

    Heyden, Matthias; Tobias, Douglas J; Matyushov, Dmitry V

    2012-12-21

    Absorption of terahertz (THz) radiation by aqueous solutions of large solutes reports on the polarization response of their hydration shells. This is because the dipolar relaxation of the solute is dynamically frozen at these frequencies, and most of the solute-induced absorption changes, apart from the expulsion of water, are caused by interfacial water. We propose a model expressing the dipolar response of solutions in terms of a single parameter, the interface dipole moment induced in the interfacial water by electromagnetic radiation. We apply this concept to experimental THz absorption of hydrated sugars, amino acids, and proteins. None of the solutes studied here follow the expectations of dielectric theories, which predict a negative projection of the interface dipole on the external electric field. We find that this prediction is not able to describe the available experimental data, which instead suggests a nearly zero interface dipole for sugars and a more diverse pattern for amino acids. Hydrophobic amino acids, similarly to sugars, give rise to near zero interface dipoles, while strongly hydrophilic ones are best described by a positive projection of the interface dipole on the external field. The sign of the interface dipole is connected to the slope of the absorption coefficient with the solute concentration. A positive slope, implying an increase in the solution polarity relative to water, mirrors results frequently reported for protein solutions. We therefore use molecular dynamics simulations of hydrated glucose and lambda repressor protein to calculate the interface dipole moments of these solutes and the concentration dependence of the THz absorption. The absorption at THz frequencies increases with increasing solute concentration in both cases, implying a higher polarity of the solution compared to bulk water. The structure of the hydration layer, extracted from simulations, is qualitatively similar in both cases, with spatial correlations

  5. Heterogeneous nucleation of aspartame from aqueous solutions

    Science.gov (United States)

    Kubota, Noriaki; Kinno, Hiroaki; Shimizu, Kenji

    1990-03-01

    Waiting times, the time from the instant of quenching needed for a first nucleus to appear, were measured at constant supercoolings for primary nucleation of aspartame (α-L-aspartyl-L-phenylalanine methylester) from aqueous solutions, which were sealed into glass ampoules (solution volume = 3.16 cm 3). Since the waiting time became shorter by filtering the solution prior to quenching, the nucleation was concluded to be heterogeneously induced. The measured waiting time consisted of two parts: time needed for the nucleus to grow to a detactable size (growth time) and stochastic time needed for nucleation (true waiting time). The distribution of the true waiting time, is well explained by a stochastic model, in which nucleation is regarded to occur heterogeneously and in a stochastic manner by two kinds of active sites. The active sites are estimated to be located on foreign particles in which such elements as Si, Al and Mg were contained. The amount of each element is very small in the order of magnitude of ppb (mass basis) of the whole solution. The growth time was correlated with the degree of supercooling.

  6. Functionalized polymers for binding to solutes in aqueous solutions

    Science.gov (United States)

    Smith, Barbara F.; Robison, Thomas W.

    2006-11-21

    A functionalized polymer for binding a dissolved molecule in an aqueous solution is presented. The polymer has a backbone polymer to which one or more functional groups are covalently linked. The backbone polymer can be such polymers as polyethylenimine, polyvinylamine, polyallylamine, and polypropylamine. These polymers are generally water-soluble, but can be insoluble when cross-linked. The functional group can be for example diol derivatives, polyol derivatives, thiol and dithiol derivatives, guest-host groups, affinity groups, beta-diphosphonic acids, and beta-diamides

  7. "Switchable water": aqueous solutions of switchable ionic strength.

    Science.gov (United States)

    Mercer, Sean M; Jessop, Philip G

    2010-04-26

    "Salting out" is a standard method for separating water-soluble organic compounds from water. In this method, adding a large amount of salt to the aqueous solution forces the organic compound out of the aqueous phase. However, the method can not be considered sustainable because it creates highly salty water. A greener alternative would be a method that allows reversible salting out. Herein, we describe aqueous solutions of switchable ionic strength. Aqueous solutions of a diamine in water have essentially zero ionic strength but are converted by CO(2) into solutions of high ionic strength. The change is reversible. Application to the reversible salting out of THF from water is described.

  8. Stability of cefozopran hydrochloride in aqueous solutions.

    Science.gov (United States)

    Zalewski, Przemysław; Skibiński, Robert; Paczkowska, Magdalena; Garbacki, Piotr; Talaczyńska, Alicja; Cielecka-Piontek, Judyta; Jelińska, Anna

    2016-01-01

    The influence of pH on the stability of cefozopran hydrochloride (CZH) was investigated in the pH range of 0.44-13.00. Six degradation products were identified with a hybrid ESI-Q-TOF mass spectrometer. The degradation of CZH as a result of hydrolysis was a pseudo-first-order reaction. As general acid-base hydrolysis of CZH was not occurred in the solutions of hydrochloric acid, sodium hydroxide, acetate, borate and phosphate buffers, kobs = kpH because specific acid-base catalysis was observed. Specific acid-base catalysis of CZH consisted of the following reactions: hydrolysis of CZH catalyzed by hydrogen ions (kH+), hydrolysis of dications (k1H2O), monocations (k2H2O) and zwitter ions (k3H2O) and hydrolysis of zwitter ions (k1OH-) and monoanions (k2OH-) of CZH catalyzed by hydroxide ions. The total rate of the reaction was equal to the sum of partial reactions: [Formula: see text]. CZH similarly like other fourth generation cephalosporin was most stable at slightly acidic and neutral pH and less stable in alkaline pH. The cleavage of the β-lactam ring resulting from a nucleophilic attack on the carbonyl carbon in the β-lactam moiety is the preferred degradation pathway of β-lactam antibiotics in aqueous solutions.

  9. Formation of hydroxyapatite in various aqueous solutions

    Science.gov (United States)

    Sturgeon, Jacqueline Lee

    Hydroxyapatite (HAp), Ca10(PO4)6(OH) 2, is important in the field of biomaterials as it is the mineral component of bones and teeth. Biological apatites do not maintain an exact composition and are usually calcium-deficient, represented as Ca(10- x)(HPO 4)x(PO4)(6-x)(OH)(2-x), where x ranges from 0 to 1, with various ion substitutions. Formation of calcium-deficient hydroxyapatites (CDHAp) from solid calcium phosphate precursor materials was performed at physiologic temperature (37°C) in a variety of aqueous solutions. Two cement systems were utilized in these experiments: tetralcium phosphate (TetCP) with dicalcium phosphate anhydrous (DCPA) and beta-tricalcium phosphate (beta-TCP). The kinetics, solution chemistry, phase evolution, and microstructure of the developed apatites were analyzed as appropriate. Reaction of beta-TCP in ammonium fluoride solutions formed HAp substituted with fluoride and calculated to be deficient in calcium. A new ratio of TetCP to DCPA was used with solutions of sodium bicarbonate to form a calcium-deficient carbonate hydroxyapatite. The capacity for sodium dihydrogen phosphate to buffer pH increases and enhance reaction kinetics in this system was also explored. Formation of a highly crystalline CDHAp was achieved by hydrolyzing beta-TCP in water for extended time periods. Lattice parameters were among the features characterized for this apatite. The hydrolysis of beta-TCP in phosphate buffered saline (PBS) and simulated body fluids (SBF) was also investigated; use of SBF was found to completely inhibit formation of HAp in this system while reaction in PBS was slow in comparison to water. The effects of filler materials on the mechanical properties of a calcium phosphate cement were examined using the TetCP/DCPA system. Dense aggregates were not found to decrease compressive strength in comparison to the cement alone. The use of aggregates was found to improve the compressive strength of cement formed using NaHCO3 solution as a

  10. 21 CFR 524.1200b - Kanamycin ophthalmic aqueous solution.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Kanamycin ophthalmic aqueous solution. 524.1200b Section 524.1200b Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 524.1200b Kanamycin ophthalmic aqueous solution. (a) Specifications. The drug, which is in an...

  11. Acetic acid extraction from aqueous solutions using fatty acids

    NARCIS (Netherlands)

    IJmker, H.M.; Gramblicka, M.; Kersten, Sascha R.A.; van der Ham, Aloysius G.J.; Schuur, Boelo

    2014-01-01

    A major challenge for production of acetic acid via bio-based routes is cost-effective concentration and purification of the acetic acid from the aqueous solutions, for which liquid–liquid extraction is a possible method. A main challenge in extraction of acetic acid from dilute aqueous solutions is

  12. Acetic acid extraction from aqueous solutions using fatty acids

    NARCIS (Netherlands)

    IJmker, H.M.; Gramblicka, M.; Kersten, S.R.A.; Ham, van der A.G.J.; Schuur, B.

    2014-01-01

    A major challenge for production of acetic acid via bio-based routes is cost-effective concentration and purification of the acetic acid from the aqueous solutions, for which liquid–liquid extraction is a possible method. A main challenge in extraction of acetic acid from dilute aqueous solutions is

  13. Structure of aqueous sodium perchlorate solutions.

    Science.gov (United States)

    General, Ignacio J; Asciutto, Eliana K; Madura, Jeffry D

    2008-12-01

    Salt solutions have been the object of study of many scientists through history, but one of the most important findings came along when the Hofmeister series were discovered. Their importance arises from the fact that they influence the relative solubility of proteins, and solubility is directly related to one of today's holy grails: protein folding. In this work we characterize one of the more-destabilizing salts in the series, sodium perchlorate, by studying it as an aqueous solution at various concentrations ranging from 0.08 to 1.60 mol/L. Molecular dynamics simulations at room temperature permitted a detailed study of the organization of solvent and cosolvent, in terms of its radial distribution functions, along with the study of the structure of hydrogen bonds in the ions' solvation shells. We found that the distribution functions have some variations in their shape as concentration changes, but the position of their peaks is mostly unaffected. Regarding water, the most salient fact is the noticeable (although small) change in the second hydration shell and even beyond, especially for g(O(w)***O(w)), showing that the locality of salt effects should not be restricted to considerations of only the first solvation shell. The perturbation of the second shell also appears in the study of the HB network, where the difference between the number of HBs around a water molecule and around the Na(+) cation gets much smaller as one goes from the first to the second solvation shell, yet the difference is not negligible. Nevertheless, the effect of the ions past their first hydration shell is not enough to make a noticeable change in the global HB network. The Kirkwood-Buff theory of liquids was applied to our system, in order to calculate the activity derivative of the cosolvent. This coefficient, along with a previously calculated preferential binding, allowed us to establish that if a folded AP peptide is immersed in the studied solution, becoming the solute, then

  14. Fluoride Adsorption by Pumice from Aqueous Solutions

    Directory of Open Access Journals (Sweden)

    Amir Hossein Mahvi

    2012-01-01

    Full Text Available Drinking water provides many vital elements for the human body, but the presence of some dissolved elements more than permissible concentration can endanger human health. Among the dissolved elements in drinking water, fluoride is noticeable, because both the very low or very high concentrations have adverse health impacts such as dental caries. Therefore, fluoride concentration should be kept in acceptable levels. In this study Pumice was used for fluoride removal. It was found that Fluoride sorption kinetic was fitted by pseudo-second-order model. The maximum sorption capacity of Pumice was found to be 13.51 mg/g at laboratory temperature (24°C. Maximum sorption study occurred at pH= 3. Results of Isotherm showed the fluoride sorption has been well fitted with Freundlich isotherm model. This study has demonstrated that Pumice can be used as effective adsorbents for fluoride removal from aqueous solutions. The adsorbent prepared in this study was cheap and efficient in removal of fluoride than other adsorbents.

  15. Effects of Hf incorporation on indium zinc oxide thin-film transistors using solution process

    Science.gov (United States)

    Li, Xifeng; Xin, Enlong; Zhang, Jianhua

    2015-01-01

    Thin-film transistors (TFTs) were fabricated by employing amorphous hafnium indium zinc oxide (HIZO) thin films as the active channel layer by the solution process. Thermogravimetry-differential thermal analysis, transmittance measurements, atomic force microscopy, scanning electron microscopy, x-ray diffraction, and Fourier transform infrared analysis were used to study the formation, structure, and optical properties of the HIZO films. The results showed that the addition of Hf to the IZO system resulted in suppression of carrier generation. The HIZO TFTs exhibited lower off-currents and higher onoff current ratios than IZO TFTs without Hf doping. HIZO TFTs with a Hf doping content of 5 at. % obtained a threshold voltage of 3.7 V, a mobility of 0.27 cm2 V-1 s-1, a subthreshold swing of 1.2 V/dec, and an on-off current ratio of 106.

  16. An experimental study of the solubility and speciation of niobium in fluoride-bearing aqueous solutions at elevated temperature

    Science.gov (United States)

    Timofeev, A.; Migdisov, Art. A.; Williams-Jones, A. E.

    2015-06-01

    The solubility of Nb2O5 and the speciation of niobium in HF-bearing aqueous solutions have been determined at temperatures of 150, 200, and 250 °C and saturated water pressure. At a pH of ∼2 and at low HF concentration, niobium is transported primarily as the species Nb(OH)4+ and at high HF concentration, as the species NbF2(OH)3°. Equilibrium constants for the formation of Nb(OH)4+ range from -11.23 ± 0.26 to -10.86 ± 0.24 and for the formation of NbF2(OH)3° from -3.84 ± 0.20 to -5.08 ± 0.42, at 150 and 250 °C. The results of this study show that the solubility of Nb2O5 (solid) in aqueous fluids increases with increasing HF concentration, but is not strongly affected by temperature. The influence of pH is variable; at low pH and HF concentration, a decrease in pH increases the solubility of Nb2O5 (solid). At higher pH, the reverse may be true. Modeling of the transport and deposition of niobium suggests that simple mixing with a brine is not an effective method for removing niobium from solution. By contrast, interaction of an acidic fluid with carbonate rock results in a rapid reduction in the capacity of the fluid to mobilize niobium.

  17. EXAFS study of the speciation of protactinium(V) in aqueous hydrofluoric acid solutions.

    Science.gov (United States)

    De Sio, Stéphanie M; Wilson, Richard E

    2014-12-01

    The speciation of protactinium(V) in hydrofluoric acid (HF) solutions was studied using X-ray absorption spectroscopy. Extended X-ray absorption fine structure measurements were performed on an aqueous solution of 0.05 M protactinium(V) with various HF concentrations ranging from 0.5 to 27 M in order to probe the protactinium coordination sphere with respect to the identity and number of coordinating ligands. The resulting fits to the spectra suggest the presence of an eight-coordinate homoleptic fluoro complex in highly concentrated fluoride solutions (27 M), with equilibrium between seven- and eight-coordinate fluoro complexes at moderate acidities, and in more dilute solutions, results indicate that one water molecule is likely to replace a fluoride in the first coordination sphere, at a distance of 2.54-2.57 Å. Comparisons of this chemistry with group V metals, niobium and tantalum, are presented, and the potential implications for these results on the hydrolytic behavior of protactinium in aqueous systems are discussed.

  18. Photolysis of Periodate and Periodic Acid in Aqueous Solution

    DEFF Research Database (Denmark)

    Sehested, Knud; Kläning, U. K.

    1978-01-01

    The photochemistry of periodate and periodic acid in aqueous solution was studied (i) by quantum yield measurements at low light intensity (ii) by flash photolysis, and (iii) by photolysis of glassy samples at 77 K. The photochemical studies were supplemented with pulse radiolysis studies...... of aqueous periodate solutions and with kinetic studies using stopped-flow technique. In strongly alkaline solution the photodecomposition of periodate proceeds via formation of O– and IVI. At pH

  19. Thermophysical Properties of Aqueous Solutions Used as Secondary Working Fluids

    OpenAIRE

    Melinder, Åke

    2007-01-01

    Secondary working fluids (secondary refrigerants, heat transfer fluids, antifreezes, brines) have long been used in various indirect re-frigeration and heat pump systems. Aqueous solutions (water solu-tions) have long been used as single phase (liquid only) secondary working fluids for cooling in supermarkets, ice rinks, heat recovery systems, heat pumps and other applications. However, aqueous solutions are increasingly used also for freezers in supermarkets and other applications in low tem...

  20. Ozone photolysis of paracetamol in aqueous solution.

    Science.gov (United States)

    Neamţu, Mariana; Bobu, Maria; Kettrup, Antonius; Siminiceanu, Ilie

    2013-01-01

    The degradation of a paracetamol (N-acetil-para-aminofenol) aqueous solution (C (0) P = 5 mmol L(-1)) is studied in a bench-scale setup by means of simple ozonation (O3) and ozonation catalyzed with UV light (O3/UV) in order to quantify the influence of UV light on the degradation process. The results have shown that under the adopted experimental conditions (25°C, applied ozone dose = 9.8 mg L(-1) and gas flow rate of 20 L h(-1)) both oxidative systems are capable of removing the substrate with mineralization degrees up to 51% for ozonation and 53% for O3/UV. HPICE chromatography allowed the detection of nitrate ions and maleic and oxalic acids as ultimate carboxylic acids. The experimental data have been interpreted through 5 indicators: the conversion of paracetamol (XP ), the conversion degree of TOC (XTOC ), the apparent rate constant (kap ), the Hatta number (Ha) and the enhancement factor (E). The main advantage of photo-ozonation compared to simple ozonation was a more advanced conversion (79% vs. 92% after 90 min). The paracetamol decay follows a pseudo-first-order reaction with a superior rate constant (higher by 54%) for the UV catalyzed system in comparison with direct ozonation. Mineralization is slightly accelerated (+4%) in the O3/UV system, due to the additional production of hydroxyl radicals induced by the UV light and a higher Hatta number (+24%). Nevertheless, the process was still in the slow reaction kinetic regime (Ha < 0.3), and the enhancement factor was not significantly increased. The results are useful for the design and scale-up of the gas-liquid processes.

  1. Critical properties of aqueous solutions. Part 1: Experimental data

    Science.gov (United States)

    Abdulagatov, A. I.; Stepanov, G. V.; Abdulagatov, I. M.

    2008-08-01

    All data available in the literature on the critical properties of binary aqueous solutions like H2O + common salt, H2O + hydrocarbon, H2O + alcohol, H2O + gas, and others are gathered. Methods for determining them are presented together with errors and concentration measurement intervals for each source of data. The format in which the data are presented will allow the readers to quickly find the necessary information on the critical properties of aqueous solutions from the original sources and use them for solving scientific and engineering tasks. Certain general features of the critical lines and phase diagrams of aqueous solutions with volatile and nonvolatile components are discussed.

  2. Interstitial solid solution Hf{sub 5}Ga{sub x}Sn{sub 3} (x = 0-1)

    Energy Technology Data Exchange (ETDEWEB)

    Voznyak, I., E-mail: iravoznyak@gmail.com [Department of Inorganic Chemistry, Ivan Franko National University of Lviv, Kyryla i Mefodiya St. 6, 79005 Lviv (Ukraine); Tokaychuk, Ya. [Department of Inorganic Chemistry, Ivan Franko National University of Lviv, Kyryla i Mefodiya St. 6, 79005 Lviv (Ukraine); Hlukhyy, V.; Faessler, T.F. [Department of Chemistry, Technische Universitaet Muenchen, Lichtenbergstr. 4, 85747 Garching (Germany); Gladyshevskii, R. [Department of Inorganic Chemistry, Ivan Franko National University of Lviv, Kyryla i Mefodiya St. 6, 79005 Lviv (Ukraine)

    2012-01-25

    Highlights: Black-Right-Pointing-Pointer Formation of an interstitial solid solution Hf{sub 5}Ga{sub x}Sn{sub 3} (x = 0-1) based on the binary compound Hf{sub 5}Sn{sub 3} was established at 600 Degree-Sign C. Black-Right-Pointing-Pointer The Ga atoms occupy [Hf{sub 6}] octahedral interstices (Wyckoff position 2b) up to the composition Hf{sub 5}GaSn{sub 3}, which represents a Hf{sub 5}CuSn{sub 3}-type structure (ordered derivative of Ti{sub 5}Ga{sub 4}). Black-Right-Pointing-Pointer The cell parameters and cell volume increase with increasing gallium content. Black-Right-Pointing-Pointer The coordination number of the hafnium atoms in Wyckoff position 6g is reduced from 15 (Hf1Sn{sub 5}Hf{sub 10} for Hf{sub 5}Sn{sub 3}) to 11 (Hf1Sn{sub 5}Ga{sub 2}Hf{sub 4} for Hf{sub 5}GaSn{sub 3}). - Abstract: Formation of an interstitial solid solution Hf{sub 5}Ga{sub x}Sn{sub 3} (x = 0-1) based on the binary compound Hf{sub 5}Sn{sub 3} (structure type Mn{sub 5}Si{sub 3}, Pearson symbol hP16, space group P6{sub 3}/mcm, a = 8.36562(6), c = 5.70775(4) Angstrom-Sign from X-ray powder diffraction) was established at 600 Degree-Sign C. The crystal structure (structure type Hf{sub 5}CuSn{sub 3}, ordered derivative of Ti{sub 5}Ga{sub 4}, hP18, P6{sub 3}/mcm) was refined on X-ray single-crystal diffraction data for three compositions: Hf{sub 5}Ga{sub 0.16(3)}Sn{sub 3} (a = 8.3288(12), c = 5.6988(11) Angstrom-Sign ), Hf{sub 5}Ga{sub 0.53(2)}Sn{sub 3} (a = 8.4205(12), c = 5.7655(12) Angstrom-Sign ) and Hf{sub 5}GaSn{sub 3} (a = 8.5564(12), c = 5.7859(12) Angstrom-Sign ). The Ga atoms occupy Wyckoff position 2b at the centres of Hf{sub 6} octahedral interstices.

  3. Enhanced etching of silicon didioxide guided by carbon nanotubes in HF solution

    Institute of Scientific and Technical Information of China (English)

    Zhao Hua-Bo; Ying Alex Yi-Qun; Yan Feng; Wei Qin-Qin; Fu Yun-Yi; Zhang Yan; Li Yan; Wei Zi-Jun; Zhang Zhao-Hui

    2011-01-01

    This paper describes a new method to create nanoscale SiO2 pits or channels using single-walled carbon nanotubes (SWNTs) in an HF solution at room temperature within a few seconds.Using aligned SWNT arrays,a pattern of nanoscale SiO2 channels can be prepared.The nanoscale SiO2 patterns can also be created on the surface of three dimensional (3D) SiO2 substrate and even the nanoscale trenches can be constructed with arbitrary shapes.A possible mechanism for this enhanced etching of SiO2 has been qualitatively analysed using defects in SWNTs,combined with H3O+ electric double layers around SWNTs in an HF solution.

  4. Wet Etching of Heat Treated Atomic Layer Chemical Vapor Deposited Zirconium Oxide in HF Based Solutions

    Science.gov (United States)

    Balasubramanian, Sriram; Raghavan, Srini

    2008-06-01

    Alternative materials are being considered to replace silicon dioxide as gate dielectric material. Of these, the oxides of hafnium and zirconium show the most promise. However, integrating these new high-k materials into the existing complementary metal-oxide-semiconductor (CMOS) process remains a challenge. One particular area of concern is the wet etching of heat treated high-k dielectrics. In this paper, work done on the wet etching of heat treated atomic layer chemical vapor deposited (ALCVD) zirconium oxide in HF based solutions is presented. It was found that heat treated material, while refractory to wet etching at room temperature, is more amenable to etching at higher temperatures when methane sulfonic acid is added to dilute HF solutions. Selectivity over SiO2 is still a concern.

  5. Removal of boron from aqueous solution using cryptocrystalline magnesite

    CSIR Research Space (South Africa)

    Masindi, Vhahangwele

    2016-05-01

    Full Text Available of Water Reuse and Desalination Removal of boron from aqueous solution using cryptocrystalline magnesite Vhahangwele Masindi and Mugera W. Gitari Abstract The present study aimed to evaluate the efficiency of using cryptocrystalline magnesite...

  6. (CI 42053) from an aqueous solution using Azadirachta indica leaf ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-11-05

    Nov 5, 2008 ... dye wastewater owing to low biodegradability of dyes. They are usually .... adsorption of organic acids on the surface of finely divided charcoal (Khan .... for the removal of chromium (VI) from aqueous solutions on the activated ...

  7. Instability of aqueous solutions of polyacrylamide in a hydrodynamic field

    Science.gov (United States)

    Makogon, B. P.; Bykova, E. N.; Bezrukova, M. A.; Klenin, S. I.; Ivanyuta, Yu. F.; Povkh, I. L.; Toryanik, A. I.

    1985-09-01

    This article discusses findings obtained regarding the effect of a hydrodynamic field on the reduced viscosity, effect of turbulent friction reduction, light scattering, double refraction, and optical density of aqueous solutions of hydrolyzed polyacrylamide.

  8. Surface tension and related thermodynamic quantities of aqueous electrolyte solutions

    CERN Document Server

    Matubayasi, Norihiro

    2013-01-01

    Surface tension provides a thermodynamic avenue for analyzing systems in equilibrium and formulating phenomenological explanations for the behavior of constituent molecules in the surface region. While there are extensive experimental observations and established ideas regarding desorption of ions from the surfaces of aqueous salt solutions, a more successful discussion of the theory has recently emerged, which allows the quantitative calculation of the distribution of ions in the surface region. Surface Tension and Related Thermodynamic Quantities of Aqueous Electrolyte Solutions provides a d

  9. The effect of aqueous solution in Raman spectroscopy

    Science.gov (United States)

    Kang, Jian; Yuan, Xiaojuan; Dong, Xiao; Gu, Huaimin

    2009-08-01

    In Raman detection, the most popular solution for the samples is tri-distilled water. But the effect of aqueous solution is barely studied in Raman spectroscopy. In fact Raman spectroscopy of solid-state and liquid-state are obvious different. In addition, FWHM of Raman spectral peaks also change evidently. In this paper, several samples were selected for the experiment; including sodium nitrate, sodium nitrite, glucose and caffeine. By comparing the Raman spectroscopy of samples at different concentrations, it is found that the concentration of the sample can affect the strength of Raman spectroscopy, but it can hardly impact FWHM of Raman spectral peaks. By comparing the Raman spectroscopy of liquid-state with the Raman spectroscopy of solid-state, it is observed that the FWHM of some Raman spectral peaks varied obviously; that may be because when the sample was dissolved into the water, the crystal lattice structure was broken, and for some samples atom form became ion form in aqueous solution. Those structural variations caused the variation of the FWHM. The Raman spectroscopy of caffeine aqueous solution at very low concentration was also detected and analyzed. Compared with the Raman spectra of solid-state samples, it is found that some Raman spectral peaks disappeared when the sample was dissolved in water. It is possible that the low concentration of the sample result in the weakening of Raman signals and the disappearing of some weak Raman spectral peaks. Then Ag nanoparticles were added into the caffeine aqueous solution, the results suggest that surface enhanced Raman spectroscopy (SERS) not only can enhance the Raman spectral signal, but also can reduce the effect of aqueous solution. It is concluded that the concentration of sample only affects the strength of Raman spectroscopy; the aqueous solution can affect the FWHM of Raman spectral peaks; and SERS can reduce the effect of aqueous solution.

  10. Ideal solution behaviour of glassy Cu–Ti, Zr, Hf alloys and properties of amorphous copper

    Energy Technology Data Exchange (ETDEWEB)

    Ristić, R. [Department of Physics, University of Osijek, Trg Ljudevita Gaja 6, HR-3100 Osijek (Croatia); Cooper, J.R. [Department of Physics, Cavendish Laboratory, J.J. Thomson Avenue, CB3 0HE Cambridge (United Kingdom); Zadro, K.; Pajić, D. [Department of Physics, Faculty of Science, Bijenička cesta 32, HR-10002 Zagreb (Croatia); Ivkov, J. [Institute of Physics, Bijenička cesta 46, HR-10002 Zagreb (Croatia); Babić, E. [Department of Physics, Faculty of Science, Bijenička cesta 32, HR-10002 Zagreb (Croatia)

    2015-02-05

    Highlights: • Ideal solution behaviour (ISB) is established in all Cu–Ti, Zr, Hf glassy alloys. • ISB enables reliable estimates for various properties of amorphous Cu. • ISB also impacts glass forming ability in these and probably other similar alloys. - Abstract: A comprehensive study of selected properties of amorphous (a) Cu–TE alloys (TE = Ti, Zr and Hf) has been performed. Data for average atomic volumes of a-Cu–Hf, Ti alloys combined with literature data show that ideal solution behaviour (Vegard’s law) extends over the whole glass forming range (GFR) in all a-Cu–TE alloys. This enables one to obtain an insight into some properties and probable atomic arrangements for both, a-TEs (Ristić et al., 2010) and a-Cu by extrapolation of the data for alloys. Indeed the atomic volumes and other properties studied for all a-Cu–TE alloys extrapolate to the same values for a-Cu. Depending on the property, these values are either close to those of crystalline (c) Cu, or are close to those for liquid (L) Cu. In particular, the electronic transport properties of a-Cu seem close to those of L-Cu, whereas the static properties, such as the density of states, and Young’s modulus, converge to those of c-Cu. The possible impact of these results on our understanding of a-Cu–TE alloys, including glass forming ability, is discussed.

  11. Aqueous solutions at the interface with phospholipid bilayers.

    Science.gov (United States)

    Berkowitz, Max L; Vácha, Robert

    2012-01-17

    In a sense, life is defined by membranes, because they delineate the barrier between the living cell and its surroundings. Membranes are also essential for regulating the machinery of life throughout many interfaces within the cell's interior. A large number of experimental, computational, and theoretical studies have demonstrated how the properties of water and ionic aqueous solutions change due to the vicinity of membranes and, in turn, how the properties of membranes depend on the presence of aqueous solutions. Consequently, understanding the character of aqueous solutions at their interface with biological membranes is critical to research progress on many fronts. The importance of incorporating a molecular-level description of water into the study of biomembrane surfaces was demonstrated by an examination of the interaction between phospholipid bilayers that can serve as model biological membranes. The results showed that, in addition to well-known forces, such as van der Waals and screened Coulomb, one has to consider a repulsion force due to the removal of water between surfaces. It was also known that physicochemical properties of biological membranes are strongly influenced by the specific character of the ions in the surrounding aqueous solutions because of the observation that different anions produce different effects on muscle twitch tension. In this Account, we describe the interaction of pure water, and also of aqueous ionic solutions, with model membranes. We show that a symbiosis of experimental and computational work over the past few years has resulted in substantial progress in the field. We now better understand the origin of the hydration force, the structural properties of water at the interface with phospholipid bilayers, and the influence of phospholipid headgroups on the dynamics of water. We also improved our knowledge of the ion-specific effect, which is observed at the interface of the phospholipid bilayer and aqueous solution, and its

  12. Acidities of Water and Methanol in Aqueous Solution and DMSO

    Science.gov (United States)

    Gao, Daqing

    2009-01-01

    The relative acidities of water and methanol have been a nagging issue. In gas phase, methanol is more acidic than water by 36.0 kJ/mol; however, in aqueous solution, the acidities of methanol and water are almost identical. The acidity of an acid in solution is determined by both the intrinsic gas-phase ionization Gibbs energy and the solvent…

  13. Acidities of Water and Methanol in Aqueous Solution and DMSO

    Science.gov (United States)

    Gao, Daqing

    2009-01-01

    The relative acidities of water and methanol have been a nagging issue. In gas phase, methanol is more acidic than water by 36.0 kJ/mol; however, in aqueous solution, the acidities of methanol and water are almost identical. The acidity of an acid in solution is determined by both the intrinsic gas-phase ionization Gibbs energy and the solvent…

  14. Synthesis and Aqueous Solution Viscosity of Hydrophobically Modified Xanthan Gum

    Institute of Scientific and Technical Information of China (English)

    QIAN Xiao-lin; WU Wen-hui; YU Pei-zhi; WANG Jian-quan

    2007-01-01

    Two xanthan gum derivatives hydrophobically modified by 4 or 8 tetradecyl chains per 100 xanthan gum structure units were synthesized. The derivatives were studied by scanning electron microscope and pyrene fluorescence spectrometry. And the aqueous solution apparent viscosity of the derivatives was investigated. The results indicate that the network of the derivatives with more hydrophobic groups is closer and tighter. With increasing of alkyl chain substitution degree, the hydrophobically associating interactions enhance in aqueous solution. Aqueous solution apparent viscosity of the derivatives increases with increasing of polymer concentration and alkyl substitution degree, and decreases with the increase of temperature. In the brine solution, the strong viscosity enhancement phenomenon appears. The interaction between the derivatives and surfactant sodium dodecylbenzene sulfonate is strong.

  15. Adsorption of arsenic from aqueous solution using magnetic graphene oxide

    Science.gov (United States)

    Sherlala, A. I. A.; Raman, A. A.; Bello, M. M.

    2017-06-01

    A binary of graphene oxide (GO) and iron oxide (IO) was prepared and used for the removal of arsenic from aqueous solution. The synthesized compound was characterized using XRD analysis. The prepared composite was used for the adsorption of arsenic from aqueous solution. Central Composite Design was used to design the adsorption experiments and to investigate the effects of operational parameters (initial concentration of arsenic, adsorbent dosage, pH and time) on the adsorption capacity and efficiency. The adsorbent shows a high adsorption capacity for the arsenic. The adsorption efficiency ranges between 33.2 % and 99.95 %. The most significant factors affecting the adsorption capacity were found to be the initial concentration of arsenic and the adsorbent dosage. The initial pH of the solution slightly affects the adsorption capacity, with the maximum adsorption capacity occurring around pH 6 - 7. Thus, the developed adsorbent has a potential for effective removal of arsenic from aqueous solution.

  16. Fabrication of resistive switching memory based on solution processed PMMA-HfO x blended thin films

    Science.gov (United States)

    Lee, Jae-Won; Cho, Won-Ju

    2017-02-01

    In this study, we developed PMMA-HfO x blended resistive random access memory (ReRAM) devices using solution processing to overcome the drawbacks of the individual organic and inorganic materials. Resistive switching behaviors of solution-processed PMMA, PMMA-HfO x , and HfO x film-based ReRAM devices were investigated. The poor electrical characteristic of PMMA and brittle mechanical properties of HfO x can be improved by blending PMMA and HfO x together. The PMMA-HfO x blended ReRAM device exhibited a larger memory window, stable endurance and retention, a lower operation power, and better set/reset voltage distributions. Furthermore, these new systems featured multilevel conduction states at different reset bias for non-volatile multilevel memory applications. Therefore, solution-processed PMMA-HfO x blended films are a promising material for non-volatile memory devices on flexible or wearable electronic systems.

  17. Structure of water and the thermodynamics of aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Nemethy, G.

    1970-10-26

    This report represents the summary of a series of lectures held at the Istituto Superiore di Sanita, Laboratori di Fisica, from 18 September to 26 October 1970. The topics discussed were: Intermolecular forces, the individual water molecule and the hydrogen bond, the structures of the solid phases of water, experimental information on the strucuture of liquid water, theoretical models of water structure, experimental properties and theoretical models of aqueous solutions of nonpolar solutes, polar solutes, and electrolytes, the conformational stability of biological macromolecules.

  18. Conductivity of Oxalic Acid in Aqueous Solution at Low Concentration

    Institute of Scientific and Technical Information of China (English)

    倪良; 韩世钧

    2005-01-01

    Oxalic acid is a weak and unsymmetrical bi-basic acid. There exist dissociation and association equilibria among the species in aqueous solution. The molar conductivity of the solution is the sum of the ionic contributions.Based on this idea, a new prediction equation of ionic conductivity was proposed at low concentration. The molar conductivities of the solution and its relevant ions were calculated respectively. The results obtained were in good agreement with those from experiments and the Quint-Viallard equation.

  19. Electrochemical oxidation of pyrrhotute in aqueous solution

    Institute of Scientific and Technical Information of China (English)

    QIN Wen-qing; LI Quan; QIU Guan-zhou; XU Ben-jun

    2005-01-01

    The anodic surface oxidation of natural pyrrhotite in 0.3 mol/L KCl and HCl solution (pH 4. 0) and 0.1 mol/L Na2 B4O7 solution (pH 9.18) respectively was investigated by using cyclic voltammetry, Tafel plot, and chronoamperometry. In 0.3 mol/L KCl and HCl solution (pH 4.0), at potential less than 0.5 V(vs SHE), the production of anodic oxidation on pyrrhotite surface can not maintain a stable phase to form a passive film. In 0. 1 mol/L Na2B4 O7 solution (pH 9.18), when the electrode potential increases to more than 0.5 V (vs SHE), part of S is oxidized to sulfate, making the passive film somewhat porous, but elemental S and metal oxidates Fe(OH)3 still remain on the electrode surface, and the passive film can not be broken down totally. According to PARCalc Tafel analysis,the corresponding corrosion current density (J0) is 5.34 μA/cm2 , which is also the exchange current density of the oxidation reaction on pyrrhotite electrode surface in 0. 1 mol/L Na2B4O7 solution (pH 9.18). The electrochemical dynamics equation of the oxidation was determined.

  20. Molecular Weight and Aggregation of Erwinia Gum in Aqueous Solutions

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Erwinia(E) gum is composed of glucose, fucose, galactose and glucuronic acid. The weight-average molecular weights Mw, number-average molecular weights Mn and intrinsic viscosities[η] of the four fractions and the unfractionated E gum in aqueous solutions at desired temperatures were studied by light scattering, membrane osmometry, size exclusion chromatography(SEC) and viscometry. The experimental results prove that E gum formed aggregates in the aqueous solution at 25 ℃ and the aggregates were broken gradually with increasing temperature. The dissociation of the aggregates of E gum in the aqueous solution started at 36 ℃, and was completed at around 90 ℃. The [η] values of E gum and its fractions are much higher than those of the conventional polymers with the similar molecular weights, and decrease with increasing NaCl concentration.

  1. Oxidation of Hydrazine in Aqueous Solutions

    Science.gov (United States)

    1978-03-01

    mechanism is different in the two different temperature regions [ Levenspiel (Reference 21)]. Lurker (Reference 7) also observed that at 6°C a kinetic...and Bielski, B., Kinetic Systems: Mathematical Descriptions of Chemical Kinetics in Solution, Wiley Interscience, New York (1972). 21. Levenspiel , 0

  2. [Extraction of alpha-cypermethrin from aqueous methanol solutions].

    Science.gov (United States)

    Shormanov, V K; Chigareva, E N; Belousova, O V

    2010-01-01

    Alpha cypermethrin was extracted from aqueous methanol solutions using hydrophobic organic solvents. The efficiency of extraction was shown to depend on the chemical nature of the solvent, the water to methanol ratio, and saturation of the aqueous methanol layer with an electrolyte. Optimal extraction of alpha-cypermethrin was achieved using toluene as the solvent under desalinization conditions. The extraction factor for the removal of the sought amount of alpha-cypermethrin from the water-methanol solution (4:1) using various solvents was calculated.

  3. Removal of Phosphate from Aqueous Solution with Modified Bentonite

    Institute of Scientific and Technical Information of China (English)

    唐艳葵; 童张法; 魏光涛; 李仲民; 梁达文

    2006-01-01

    Bentonite combined with sawdust and other metallic compounds was used to remove phosphate from aqueous solutions in this study. The adsorption characteristics of phosphate on the modified bentonite were investigated, including the effects of temperature, adsorbent dosage, initial concentration of phosphate and pH on removal of phosphate by conducting a series of batch adsorption experiments. The results showed that 98% of phosphate removal rate was obtained since sawdust and bentonite used in this investigation were abundantly and locally available. It is concluded that modified bentonite is a relatively efficient, low cost and easily available adsorbent for the removal of phosphate from aqueous solutions.

  4. Predicting accurate absolute binding energies in aqueous solution

    DEFF Research Database (Denmark)

    Jensen, Jan Halborg

    2015-01-01

    Recent predictions of absolute binding free energies of host-guest complexes in aqueous solution using electronic structure theory have been encouraging for some systems, while other systems remain problematic. In this paper I summarize some of the many factors that could easily contribute 1-3 kcal......-represented by continuum models. While I focus on binding free energies in aqueous solution the approach also applies (with minor adjustments) to any free energy difference such as conformational or reaction free energy differences or activation free energies in any solvent....

  5. A lithium ion battery using an aqueous electrolyte solution

    OpenAIRE

    Zheng Chang; Chunyang Li; Yanfang Wang; Bingwei Chen; Lijun Fu; Yusong Zhu; Lixin Zhang; Yuping Wu; Wei Huang

    2016-01-01

    Energy and environmental pollution have become the two major problems in today’s society. The development of green energy storage devices with good safety, high reliability, high energy density and low cost are urgently demanded. Here we report on a lithium ion battery using an aqueous electrolyte solution. It is built up by using graphite coated with gel polymer membrane and LISICON as the negative electrode, and LiFePO4 in aqueous solution as the positive electrode. Its average discharge vo...

  6. Ionisation constants of inorganic acids and bases in aqueous solution

    CERN Document Server

    Perrin, D D

    2013-01-01

    Ionisation Constants of Inorganic Acids and Bases in Aqueous Solution, Second Edition provides a compilation of tables that summarize relevant data recorded in the literature up to the end of 1980 for the ionization constants of inorganic acids and bases in aqueous solution. This book includes references to acidity functions for strong acids and bases, as well as details about the formation of polynuclear species. This text then explains the details of each column of the tables, wherein column 1 gives the name of the substance and the negative logarithm of the ionization constant and column 2

  7. Glasslike Behavior in Aqueous Electrolyte Solutions

    CERN Document Server

    Turton, David A; Hefter, Glenn; Buchner, Richard; Wynne, Klaas; 10.1063/1.2906132

    2009-01-01

    When salts are added to water, the viscosity generally increases suggesting the ions increase the strength of the water's hydrogen-bond network. However, infrared pump-probe measurements on electrolyte solutions have found that ions have no influence on the rotational dynamics of water molecules implying no enhance-ment or breakdown of the hydrogen-bond network. Here we report optical Kerr-effect and dielectric relaxa-tion spectroscopic measurements, which have enabled us to separate the effects of rotational and transitional motions of the water molecules. These data show that electrolyte solutions behave like a supercooled liquid approaching a glass transition in which rotational and translational molecular motions are decoupled. It is now possible to understand previously conflicting viscosity data, nuclear magnetic resonance relaxation, and ultrafast infrared spectroscopy in a single unified picture.

  8. Glasslike behavior in aqueous electrolyte solutions.

    Science.gov (United States)

    Turton, David A; Hunger, Johannes; Hefter, Glenn; Buchner, Richard; Wynne, Klaas

    2008-04-28

    When salts are added to water, generally the viscosity increases, suggesting that the ions increase the strength of the water's hydrogen-bond network. However, infrared pump-probe measurements on electrolyte solutions have found that ions have no influence on the rotational dynamics of water molecules, implying no enhancement or breakdown of the hydrogen-bond network. Here, we report optical Kerr effect and dielectric relaxation spectroscopic measurements, which have enabled us to separate the effects of rotational and transitional motions of the water molecules. These data show that electrolyte solutions behave like a supercooled liquid approaching a glass transition in which rotational and translational molecular motions are decoupled. It is now possible to understand previously conflicting viscosity data, nuclear magnetic resonance relaxation, and ultrafast infrared spectroscopy in a single unified picture.

  9. LIGHT SCATTERING OF POLYSACCHARIDE FROM LACQUER IN AQUEOUS SOLUTION

    Institute of Scientific and Technical Information of China (English)

    ZHANG Lina; DU Yumin; KUMANOTANI JU

    1989-01-01

    The polysaccharide having weight-average molecular weight Mw= 1. 09 × 105 , isolated from the sap of lac trees ( Vietnam ), was separated into 12 fractions by aqueous-phase preparative gel permeation chromatography. The molecular weights and molecular weight distributions of the fractions were measured in aqueous 0.08M KCl/0.01 M NaAc and 0.4M KCl/0.05M NaAc at pH = 7.6 by light scattering, viscometry and gel permeation chromatography. The Mark-Houwink equation in aqueous 0.08M KCl/0.01M NaAc at30 ℃ was found to be [ η] = 2.28 ×10-2 M0.52w ( cm3/g ), which indicated the polysaccharide chain in the aqueous solution to be a spherical random coil.

  10. Photocatalytic degradation of molinate in aqueous solutions.

    Science.gov (United States)

    Bizani, E; Lambropoulou, D; Fytianos, K; Poulios, I

    2014-11-01

    In this study, the degradation of molinate through heterogeneous photocatalysis, using two different types of the semiconductor TiO2 as photocatalyst, as well as through homogeneous treatment, applying the photo-Fenton reaction, has been investigated. As far as heterogeneous photocatalysis is concerned, the degradation of the pesticide follows apparent first-order kinetics, while the type of the catalyst and the pH value of the solution affect the degradation rate. The effect of the addition of electron scavengers (H2O2 and K2S2O8) was also studied. In the case of photo-Fenton-assisted system, the degradation also follows pseudo-first-order kinetics. Parameters such as iron's and electron scavenger's concentration and inorganic ions strongly affect the degradation rate. The extent of pesticide mineralization was investigated using dissolved organic carbon (DOC) measurements. The toxicity of the treated solution was evaluated using the Microtox test based on the luminescent bacteria Vibrio fischeri. The detoxification and mineralization efficiency was found to be dependent on the system studied, and although it did not follow the rate of pesticide disappearance, it took place in considerable extent. The study of the photodegradation treatment was completed by the determination of the intermediate by-products formed during the process, which was carried out using LC-MS/MS technique and led to similar compounds with both processes.

  11. Demonstration of reverse symmetry waveguide sensing in aqueous solutions

    DEFF Research Database (Denmark)

    Horvath, R.; Pedersen, H.C.; Larsen, N.B.

    2002-01-01

    A reverse symmetry waveguide is presented for evanescent wave sensing in aqueous solutions. The waveguide consists of a thin polystyrene film, supported by a thicker substrate layer of nanoporous silica on glass. The nanoporous substrate layer has a refractive index of n(S)=1.193, hence, with an ......A reverse symmetry waveguide is presented for evanescent wave sensing in aqueous solutions. The waveguide consists of a thin polystyrene film, supported by a thicker substrate layer of nanoporous silica on glass. The nanoporous substrate layer has a refractive index of n(S)=1.193, hence......, with an aqueous cover refractive index of n(C)=1.331, a reverse symmetry (n(S)

  12. Permeability in a state of partial solidification of aqueous solution

    Science.gov (United States)

    Okada, Masashi; Kang, Chaedong; Okiyama, Haruhiko

    A mushy region was formed by solidifying NaCl aqueous solution in a circular tube or a rectangular tube. The measurements of permeability were performed by changing volume fraction of liquid region in the mushy region. The dendritic ice in the solidification process was observed with a CCD microscope. The following results were obtained. The permeability increases with the volume fraction of liquid phase, and decreases with increasing the super-cooling degree of the solution or increasing the initial concentration of the solution, and is constant after the mushy region was formed. The arm space of dendrite becomes narrower as the super-cooling degree of the solution increases.

  13. Radiolysis of paracetamol in dilute aqueous solution

    Science.gov (United States)

    Szabó, László; Tóth, Tünde; Homlok, Renáta; Takács, Erzsébet; Wojnárovits, László

    2012-09-01

    Using radiolytic experiments hydroxyl radical (main reactant in advanced oxidation processes) was shown to effectively destroy paracetamol molecules. The basic reaction is attachment to the ring. The hydroxy-cyclohexadienyl radical produced in the further reactions may transform to hydroxylated paracetamol derivatives or to quinone type molecules and acetamide. The initial efficiency of aromatic ring destruction in the absence of dissolved O2 is c.a. 10%. The efficiency is 2-3 times higher in the presence of O2 due to its reaction with intermediate hydroxy-cyclohexadienyl radical and the subsequent ring destruction reactions through peroxi radical. Upon irradiation the toxicity of solutions at low doses increases with the dose and then at higher doses it decreases. This is due to formation of compounds with higher toxicity than paracetamol (e.g. acetamide, hidroquinone). These products, however, are highly sensitive to irradiation and degrade easily.

  14. [Anomalous Properties of Water and Aqueous Solutions at Low Temperatures].

    Science.gov (United States)

    Matsumoto, Masakazu

    2015-01-01

    Water has many anomalous properties below the room temperature. The temperature range overlaps with that of the Earth's atmosphere and also with that natural life forms favor. We review the origin of the anomalous properties of water and aqueous solutions in association with the hypothetical second critical point and liquid-liquid phase separation of water hidden in the supercooled state of liquid water.

  15. DETERMINATION OF CHLORHEXIDINE IN SALIVA AND IN AQUEOUS-SOLUTIONS

    NARCIS (Netherlands)

    de Vries, J.; Ruben, J; Arends, J.

    1991-01-01

    A new method is presented for the determination of chlorhexidine in centrifuged saliva and in aqueous solutions by means of fluorescence spectroscopy. The method relies on complex formation between chlorhexidine and eosin. The fluorescence value of the chlorhexidine-eosin system decreases with incre

  16. Pulse radiolysis of pyridine and methylpyridines in aqueous solutions

    DEFF Research Database (Denmark)

    Solar, S.; Getoff, N.; Sehested, K.

    1993-01-01

    The radicals formed from pyridine, 3-methylpyridine, 3,5-dimethylpyridine, 2,6-dimethylpyridine and 2,4,6-trimethylpyridine by attack of H, e(aq)-, OH and O.- in aqueous solutions were investigated by pulse radiolysis in the pH-range 1-13.8. The UV-vis. absorption spectra as well as the formation...

  17. CATALYSIS BY SURFACTANT AGGREGATES IN AQUEOUS-SOLUTIONS

    NARCIS (Netherlands)

    ENGBERTS, JBFN

    1992-01-01

    Catalysis of organic reactions by unfunctionalized surfactant aggregates (micelles, vesicles) in aqueous solution is largely determined by medium effects induced at the micellar binding sites and by entropy effects due to compartimentalization. The efficiency of these catalytic effects responds to c

  18. Reactive Extraction of Alcohols from Apolar Hydrocarbons with Aqueous Solutions

    NARCIS (Netherlands)

    Kuzmanovic, B.; Kuipers, N.J.M.; de Haan, A.B.; Kwant, Gerard

    2006-01-01

    The aqueous solutions are evaluated as sustainable reactive extraction solvents for the recovery of monohydroxyl alcohols (benzyl alcohol, 1-hexanol, cyclohexanol) present in few-percent concentrations in apolar hydrocarbons (toluene, n-hexane, and cyclohexane) by considering two approaches. An aque

  19. Reactive Extraction of Alcohols from Apolar Hydrocarbons with Aqueous Solutions

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The aqueous solutions are evaluated as sustainable reactive extraction solvents for the recovery of monohydroxyl alcohols (benzyl alcohol, 1-hexanol, cyclohexanol) present in few-percent concentrations in apolar hydrocarbons (toluene, n-hexane, and cyclohexane) by considering two approaches. An aqueous solution containing a reactive extractant, like borate salts, borate complexes, a monosalt of dicarboxylic acid,hydroxypropyl-cyclodextrins, and silver nitrate, shows limited potential to be used. Another approach, in which the alcohol is chemically modified prior to the extraction into an easy-extractable form, in this case a monoesterlcarboxylic acid, shows much more potential. An environmentally benign aqueous solution of sodium hydrogen carbonate can provide a distribution ratio of benzyl alcohol up to 200, leaving the solubility of the organic solvent in the aqueous solution unchanged relative to pure water and therefore increasing the selectivity with two orders of magnitude. The modification of aromatic, cyclo-aliphatic, and linear aliphatic alcohols can be performed efficiently in the apolar organic solvent without need for a catalyst. The recovery of the modified alcohol can be performed by back-extraction in combination with a spontaneous hydrolysis.

  20. Rheological properties of silica suspensions in aqueous cellulose derivatives solutions

    Science.gov (United States)

    Ryo, Y.; Kawaguchi, M.

    1992-05-01

    The rheological properties of the silica suspensions in aqueous solutions of hydroxypropylmethylcellulose (HPMC) were investigated in terms of the shear stress and storage and loss moduli (G' and G`) as a function of silica content, HPMC concentration, and HPMC molecular weight by using a coaxial cylinder rheometer.

  1. Solubility of carbon dioxide in aqueous piperazine solutions

    NARCIS (Netherlands)

    Derks, P. W. J.; Dijkstra, H. B. S.; Hogendoorn, J. A.; Versteeg, G. F.

    2005-01-01

    In the present work, new experimental data are presented on the solubility of carbon dioxide in aqueous piperazine solutions, for concentrations of 0.2 and 0.6 molar piperazine and temperatures of 25, 40, and 70°C respectively. The present data, and other data available in the literature, were

  2. Photodecomposition of an acaricide, fenazaquin, in aqueous alcoholic solution.

    Science.gov (United States)

    Bhattacharyya, Jayati; Banerjee, Hemanta; Bhattacharyya, Anjan

    2003-07-02

    Fenazaquin (I) is a new acaricide of the quinazoline class. The photodecomposition of I was studied in aqueous methanolic and 2-propanolic solution under UV light (30 h) and sunlight (70 h) separately. The photolytic half-lives in aqueous methanolic solution were found to be 17.1 h (UV) and 38.1 h (sunlight), whereas these were 12.9 h (UV) and 29.2 h (sunlight) for aqueous 2-propanolic solution; all followed a first-order reaction kinetics. Six photoproducts were obtained: beta-phenyl (p-tert-butyl) ethyl alcohol (II), 4-hydroxyquinazoline (III), p-tert-butyl vinyl benzene (IV), 2,4-dihydroxyquinazoline (V), phenyl (p-tert-butyl) acetic acid (VI), and 2-methyl-2-[4'-(2' '-hydroxyethyl)phenyl]propanoic acid (VII). Compounds VI and VII could be isolated only from aqueous 2-propanolic solution under sunlight irradiation. The major degradation products are formed as a result of cleavage of the ether bridge linking the quinazoline and phenyl ring systems of the molecule, oxidation of the tert-butyl substituent, and oxidation of the heterocyclic portion of the quinazoline ring. A probable mechanism of formation of the photoproducts is also suggested.

  3. Reactive Extraction of Alcohols from Apolar Hydrocarbons with Aqueous Solutions

    NARCIS (Netherlands)

    Kuzmanovic, Boris; Kuipers, Norbert J.M.; Haan, de André B.; Kwant, Gerard

    2006-01-01

    The aqueous solutions are evaluated as sustainable reactive extraction solvents for the recovery of monohydroxyl alcohols (benzyl alcohol, 1-hexanol, cyclohexanol) present in few-percent concentrations in apolar hydrocarbons (toluene, n-hexane, and cyclohexane) by considering two approaches. An aque

  4. Kinetics of absorption of carbon dioxide in aqueous piperazine solutions

    NARCIS (Netherlands)

    Derks, P. W. J.; Kleingeld, T.; van Aken, C.; Hogendoorn, J. A.; Versteeg, G. F.

    2006-01-01

    In the present work the absorption of carbon dioxide into aqueous piperazine (PZ) solutions has been studied in a stirred cell, at low to moderate temperatures, piperazine concentrations ranging from 0.6 to 1.5 kmol m- 3, and carbon dioxide pressures up to 500 mbar, respectively. The obtained experi

  5. Solubility of carbon dioxide in aqueous piperazine solutions

    NARCIS (Netherlands)

    Derks, P. W. J.; Dijkstra, H. B. S.; Hogendoorn, J. A.; Versteeg, G. F.

    2005-01-01

    In the present work, new experimental data are presented on the solubility of carbon dioxide in aqueous piperazine solutions, for concentrations of 0.2 and 0.6 molar piperazine and temperatures of 25, 40, and 70°C respectively. The present data, and other data available in the literature, were corr

  6. Adsorptive removal of antibiotics from aqueous solution using carbon materials.

    Science.gov (United States)

    Yu, Fei; Li, Yong; Han, Sheng; Ma, Jie

    2016-06-01

    Antibiotics, an important type of environmental contamination, have attracted many researchers to the study of their removal from aqueous solutions. Adsorption technology is a fast, efficient, and economical physicochemical method that is extensively used in wastewater treatment. From original activated carbon and carbon nanotubes to the latest graphene-based materials, carbon-based materials have been widely used as highly effective adsorbents for contaminant removal from aqueous solution because of their large specific surface area, high porosity, and high reaction activity. In this article, adsorption removal methods for four major types of antibiotic (tetracyclines, sulfonamides, macrolides, and quinolones) are reviewed. We also provide an overview of the application development of carbon materials as adsorbents for antibiotic removal from aqueous solution. The most promising works are discussed, and the main challenges in preparing high-performance adsorbents and the development tendency of adsorbents are also analyzed. This work provides theoretical guidance for subsequent research in the design and modification of carbon materials for applications in the adsorption removal of antibiotics from aqueous solution.

  7. Colorimetric and fluorescent detection of biological thiols in aqueous solution

    Institute of Scientific and Technical Information of China (English)

    Yin-Hui Li; Jin-Feng Yang; Chang-Hui Liu; Ji-Shan Li; Rong-Hua Yang

    2013-01-01

    A new colorimetric and fluorescent probe,2-(2,4-dinitrostyryl)-1,3,3-trimethyl-3H-indolium iodide (DTI),for selective and sensitive detection of biological thiols is reported.In aqueous solution at physiological pH 7.4,biological thiols react with DTI via Michael addition to give the brownish red adduct concomitant with fluorescence emission decrease.

  8. Removal of azo dye from aqueous solutions using chitosan

    Directory of Open Access Journals (Sweden)

    Zuhair Jabbar

    2014-06-01

    Full Text Available Adsorption of Congo Red (CR from aqueous solution onto chitosan was investigated in a batch system. The effects of solution pH, initial dye concentration, and temperature were studied. Results indicated that chitosan could be used as a biosorbent to remove the azo dyes from contaminated water. Synthesize of chitosan involved three main stages as preconditioning, demineralization, deproteinization and deacetylation. Chitosan was characterized using Fourier Transform Infrared Spectroscopy (FTIR and solubility in 1% acetic acid.

  9. Adsorption of lead ions from aqueous solutions using clinoptilolite

    OpenAIRE

    Golomeova, Mirjana; Zendelska, Afrodita; Krstev, Boris; Golomeov, Blagoj; Blažev, Krsto; Krstev, Aleksandar

    2014-01-01

    The adsorption of lead ions from synthetic aqueous solutions was performed by using natural zeolite (clinoptilolite). In order to determine the effectivity of clinoptilolite a series of experiments were performed under batch conditions from single ion solutions. Experiments were carried out at different initial concentration of lead ions, different initial pH values and different adsorbent mass. The adsorption kinetics is reasonably fast. It means that in the first 20 min approximately 90...

  10. The precipitation of potassium aluminium sulphate from aqueous solution

    Science.gov (United States)

    Mullin, J. W.; Žáček, S.

    1981-06-01

    A precipitation study has been made with potassium aluminium sulphate (potash alum) produced by mixing aqueous solutions of its constituent salts. Rates of nucleation, as indicated by the induction period, were measured for both agitated and non-agitated solutions over the temperature range 15-35°C. Nucleation rates increase with increases in agitation, temperature and supersaturation, but the latter has the dominant effect, as predicted by classical nucleation theory. The temperature-dependence of the interfacial tension is evaluated.

  11. Block copolymer membranes for aqueous solution applications

    KAUST Repository

    Nunes, Suzana Pereira

    2016-03-22

    Block copolymers are known for their intricate morphology. We review the state of the art of block copolymer membranes and discuss perspectives in this field. The main focus is on pore morphology tuning with a short introduction on non-porous membranes. The two main strategies for pore formation in block copolymer membranes are (i) film casting and selective block sacrifice and (ii) self-assembly and non-solvent induced phase separation (SNIPS). Different fundamental aspects involved in the manufacture of block copolymer membranes are considered, including factors affecting the equilibrium morphology in solid films, self-assembly of copolymer in solutions and macrophase separation by solvent-non-solvent exchange. Different mechanisms are proposed for different depths of the SNIPS membrane. Block copolymer membranes can be prepared with much narrower pore size distribution than homopolymer membranes. Open questions and indications of what we consider the next development steps are finally discussed. They include the synthesis and application of new copolymers and specific functionalization, adding characteristics to respond to stimuli and chemical environment, polymerization-induced phase separation, and the manufacture of organic-inorganic hybrids.

  12. Phytoremediation of Heavy Metals in Aqueous Solutions

    Directory of Open Access Journals (Sweden)

    Felix Aibuedefe AISIEN

    2010-12-01

    Full Text Available One of the major environmental problems is the pollution of water and soil by toxic heavy metals. This study investigated the phytoremediation potential of water hyacinth, for the removal of cadmium (Cd, lead (Pb and zinc (Zn. Water hyacinths were cultured in bore-hole water, supplemented with 5mg/l of Zn and Pb and 1mg/l of Cd at pH 4.5, 6.8 and 8.5. The plants were separately harvested each week for six weeks. The results showed that removal of these metals from solution was fast especially in the first two weeks, after which it became gradual till saturation point was reached. The accumulation of Cd and Zn in leaves and roots increased with increase in pH. The highest accumulation was in the roots with metal concentration of 4870mg/kg, 4150mg/kg and 710mg/kg for Zn, Pb and Cd respectively at pH 8.5. The maximum values of bioconcentration factor (BCF for Zn, Pb and Cd were 1674, 1531 and 1479 respectively, suggesting that water hyacinth was good accumulator of Zn, Pb and Cd, and could be used to treat industrial wastewater contaminated with heavy metals such as Zn, Pb and Cd.

  13. Critical droplet theory explains the glass formability of aqueous solutions.

    Science.gov (United States)

    Warkentin, Matthew; Sethna, James P; Thorne, Robert E

    2013-01-04

    When pure water is cooled at ~10(6) K / s, it forms an amorphous solid (glass) instead of the more familiar crystalline phase. The presence of solutes can reduce this required (or "critical") cooling rate by orders of magnitude. Here, we present critical cooling rates for a variety of solutes as a function of concentration and a theoretical framework for understanding these rates. For all solutes tested, the critical cooling rate is an exponential function of concentration. The exponential's characteristic concentration for each solute correlates with the solute's Stokes radius. A modification of critical droplet theory relates the characteristic concentration to the solute radius and the critical nucleation radius of ice in pure water. This simple theory of ice nucleation and glass formability in aqueous solutions has consequences for general glass-forming systems, and in cryobiology, cloud physics, and climate modeling.

  14. Assembly of DNA Architectures in a Non-Aqueous Solution

    Directory of Open Access Journals (Sweden)

    Thomas J. Proctor

    2012-08-01

    Full Text Available In the present work, the procedures for the creation of self-assembled DNA nanostructures in aqueous and non-aqueous media are described. DNA-Surfactant complex formation renders the DNA soluble in organic solvents offering an exciting way to bridge the transition of DNA origami materials electronics applications. The DNA retains its structural features, and these unique geometries provide an interesting candidate for future electronics and nanofabrication applications with potential for new properties. The DNA architectures were first assembled under aqueous conditions, and then characterized in solution (using circular dichroism (CD spectroscopy and on the surface (using atomic force microscopy (AFM. Following aqueous assembly, the DNA nanostructures were transitioned to a non-aqueous environment, where butanol was chosen for optical compatibility and thermal properties. The retention of DNA hierarchical structure and thermal stability in non-aqueous conditions were confirmed via CD spectroscopy. The formation and characterization of these higher order DNA-surfactant complexes is described in this paper.

  15. Raman spectra of amino acids and their aqueous solutions

    Science.gov (United States)

    Zhu, Guangyong; Zhu, Xian; Fan, Qi; Wan, Xueliang

    2011-03-01

    Amino acids are the basic "building blocks" that combine to form proteins and play an important physiological role in all life-forms. Amino acids can be used as models for the examination of the importance of intermolecular bonding in life processes. Raman spectra serve to obtain information regarding molecular conformation, giving valuable insights into the topology of more complex molecules (peptides and proteins). In this paper, amino acids and their aqueous solution have been studied by Raman spectroscopy. Comparisons of certain values for these frequencies in amino acids and their aqueous solutions are given. Spectra of solids when compared to those of the solute in solution are invariably much more complex and almost always sharper. We present a collection of Raman spectra of 18 kinds of amino acids ( L-alanine, L-arginine, L-aspartic acid, cystine, L-glutamic acid, L-glycine, L-histidine, L-isoluecine, L-leucine, L-lysine, L-phenylalanine, L-methionone, L-proline, L-serine, L-threonine, L-tryptophan, L-tyrosine, L-valine) and their aqueous solutions that can serve as references for the interpretation of Raman spectra of proteins and biological materials.

  16. Solid-like mechanical behaviors of ovalbumin aqueous solutions.

    Science.gov (United States)

    Ikeda, S; Nishinari, K

    2001-04-12

    Flow and dynamic mechanical properties of ovalbumin (OVA) aqueous solutions were investigated. OVA solutions exhibited relatively large zero-shear viscosity values under steady shear flow and solid-like mechanical responses against oscillating small shear strains, that is, the storage modulus was always larger than the loss modulus in the examined frequency range (0.1--100 rad s(-1)). These results suggest that dispersed OVA molecules arranged into a colloidal crystal like array stabilized by large interparticle repulsive forces. However, marked solid-like mechanical behaviors were detected even when electrostatic repulsive forces among protein molecules were virtually absent, which could not be explained solely on the basis of conventional Derjaguin--Landau--Verwey--Overbeek (DLVO) theory. Large non-DLVO repulsive forces seem to stabilize native OVA aqueous solutions.

  17. Adsorption of EDTA on activated carbon from aqueous solutions.

    Science.gov (United States)

    Zhu, Hai-song; Yang, Xiao-juan; Mao, Yan-peng; Chen, Yu; Long, Xiang-li; Yuan, Wei-kang

    2011-01-30

    In this study, the adsorption of EDTA on activated carbon from aqueous solutions has been investigated in a batch stirred cell. Experiments have been carried out to investigate the effects of temperature, EDTA concentration, pH, activated carbon mass and particle size on EDTA adsorption. The experimental results manifest that the EDTA adsorption rate increases with its concentration in the aqueous solutions. EDTA adsorption also increases with temperature. The EDTA removal from the solution increases as activated carbon mass increases. The Langmuir and Freundlich equilibrium isotherm models are found to provide a good fitting of the adsorption data, with R(2) = 0.9920 and 0.9982, respectively. The kinetic study shows that EDTA adsorption on the activated carbon is in good compliance with the pseudo-second-order kinetic model. The thermodynamic parameters (E(a), ΔG(0), ΔH(0), ΔS(0)) obtained indicate the endothermic nature of EDTA adsorption on activated carbon.

  18. Molecular mechanism of the viscosity of aqueous glucose solutions

    Science.gov (United States)

    Bulavin, L. A.; Zabashta, Yu. F.; Khlopov, A. M.; Khorol'skii, A. V.

    2017-01-01

    Experimental relations are obtained for the viscosity of aqueous glucose solutions in the temperature range of 10-80°C and concentration range 0.01-2.5%. It is found that the concentration dependence of fluidity is linear when the concentration is higher than a certain value and varies at different temperatures. The existence of such a dependence indicates that the mobilities of solvent and solute molecules are independent of the concentration of solutions. This assumption is used to construct a theoretical model, in which the structure of an aqueous glucose solution is presented as a combination of two weakly interacting networks formed by hydrogen bonds between water molecules and between glucose molecules. Theoretical relations are obtained using this model of network solution structure for the concentration and temperature dependence of solution viscosity. Experimental data are used to calculate the activation energies for water ( U w = 3.0 × 10-20 J) and glucose molecules ( U g = 2.8 × 10-20 J). It is shown that the viscosity of a solution in such a network structure is governed by the Brownian motion of solitons along the chains of hydrogen bonds. The weak interaction between networks results in the contributions to solution fluidity made by the motion of solitons in both of them being almost independent.

  19. Spontaneous Oligomerization of Nucleotide Alternatives in Aqueous Solutions

    Science.gov (United States)

    Smith, Karen E.; House, Christopher H.; Dworkin, Jason P.; Callahan, Michael P.

    2017-03-01

    On early Earth, a primitive polymer that could spontaneously form from likely available precursors may have preceded both RNA and DNA as the first genetic material. Here, we report that heated aqueous solutions containing 5-hydroxymethyluracil (HMU) result in oligomers of uracil, heated solutions containing 5-hydroxymethylcytosine (HMC) result in oligomers of cytosine, and heated solutions containing both HMU and HMC result in mixed oligomers of uracil and cytosine. Oligomerization of hydroxymethylated pyrimidines, which may have been abundant on the primitive Earth, might have been important in the development of simple informational polymers.

  20. Dephosphorization of Steelmaking Slag by Leaching with Acidic Aqueous Solution

    Science.gov (United States)

    Qiao, Yong; Diao, Jiang; Liu, Xuan; Li, Xiaosa; Zhang, Tao; Xie, Bing

    2016-09-01

    In the present paper, dephosphorization of steelmaking slag by leaching with acidic aqueous solution composed of citric acid, sodium hydroxide, hydrochloric acid and ion-exchanged water was investigated. The buffer solution of C6H8O7-NaOH-HCl system prevented changes in the pH values. Kinetic parameters including leaching temperature, slag particle size and pH values of the solution were optimized. The results showed that temperature has no obvious effect on the dissolution ratio of phosphorus. However, it has a significant effect on the dissolution ratio of iron. The dephosphorization rate increases with the decrease of slag particle size and the pH value of the solution. Over 90% of the phosphorus can be dissolved in the solution while the corresponding leaching ratio of iron was only 30% below the optimal condition. Leaching kinetics of dephosphorization follow the unreacted shrinking core model with a rate controlled step by the solid diffusion layer, the corresponding apparent activation energy being 1.233 kJ mol-1. A semiempirical kinetic equation was established. After leaching, most of the nC2S-C3P solid solution in the steelmaking slag was selectively dissolved in the aqueous solution and the iron content in the solid residue was correspondingly enriched.

  1. Rheological properties of novel thermo-responsive polycarbonates aqueous solutions

    Institute of Scientific and Technical Information of China (English)

    王月霞; 谭业邦; 黄晓玲

    2008-01-01

    Thermo-responsive multiblock polycarbonates were facilely synthesized by covalently binding poly(ethylene glycol)(PEG) and poly(propylene glycol)(PPG) blocks,using triphosgene as coupling agent and pyridine as catalyst.The aqueous solutions of thermo-responsive polycarbonates were investigated by rheological measurements.Steady-state shear measurements reveal that the polycarbonate solutions exhibit shear-thinning behavior and the hydrophilic content has a pronounced effect on the flow behavior of the polycarbonates aqueous solutions.The shear viscosity decreases with increasing poly(ethylene oxide)(PEO) composition.The increase of viscosity with increasing concentration is probably attributed to the formation of stronger network owing to interchain entanglement of PEO block at higher concentration.When the flow curves are fitted to the power law model,flow index is obtained to be less than 1,as exhibiting typical pesudoplastic fluid.The viscoelastic properties of the system also show close dependence on the composition of polycarbonates.Temperature sweep confirms that the multiblock polycarbonates exhibit thermo-responsive properties.For 7% aqueous solution of polycarbonate with composition ratio of EO to PO of 1/1,the sol-gel transition occurs at 37 ℃,which makes the system suitable as an injectable drug delivery system.

  2. Oscillometric and conductometric analysis of aqueous and organic dosimeter solutions

    DEFF Research Database (Denmark)

    Kovacs, A.; Slezsak, I.; McLaughlin, W.L.

    1995-01-01

    Conductometric and oscillometric evaluation methods have earlier been developed to determine absorbed dose in the ethanol-monochlorobenzene dosimeter solution. Recent investigations on the same solution as well as on alanine solutions included the study of the possible use of different type...... ''conductometric'' electrodes and the study of the effect of frequency on the sensitivity of the method. On the basis of these investigations an oscillometric reader has been designed and tested. The same evaluation methods have been tested on the irradiated aqueous alanine solutions, aiming also at the study...... of the applicable concentration of the alanine solute and the dose (1 to 50 kGy) and dose-rate range using both electron (2.6 mu s at 13 mu A to 4 mu s at 1.0 A pulse length and beam current) and gamma radiation (0.13 to 30 kGy h(-1))....

  3. Fractional Walden rule for electrolytes in supercooled disaccharide aqueous solutions.

    Science.gov (United States)

    Longinotti, M Paula; Corti, Horacio R

    2009-04-23

    The electrical conductivity of CsCl, KCl, Bu(4)NBr, and Bu(4)NI was studied in stable and supercooled (metastable) sucrose and trehalose aqueous solutions over a wide viscosity range. The results indicate that large positive deviations from the Walden rule occur in these systems due to the higher tendency of the ions to move in water-rich regions, as previously observed for NaCl and MgCl(2). The electrical molar conductivity viscosity dependence can be described with a fractional Walden rule (Lambdaeta(alpha) = constant), where alpha is a decoupling parameter which increases with ionic size and varies between 0.61 and 0.74 for all of the studied electrolytes. Using the electrical molar conductivity dependence of ion-ion interactions, an effective dielectric constant was calculated for a trehalose 39 wt% aqueous solution as a function of temperature. Above 278 K, the effective and the bulk solution dielectric constants are similar, but at lower temperatures, where the carbohydrate becomes less mobile than water, the effective dielectric constant approaches the dielectric constant of water. We also conclude that the solute-solvent dielectric friction contribution can be neglected, reinforcing the idea that the observed breakdown of the Walden rule is due to the existence of local microheterogeneities. The Walden plots for the studied ionic solutes show a decoupling similar to that found for the diffusion of water in the same solutions.

  4. Zinc chloride aqueous solution as a solvent for starch.

    Science.gov (United States)

    Lin, Meiying; Shang, Xiaoqin; Liu, Peng; Xie, Fengwei; Chen, Xiaodong; Sun, Yongyi; Wan, Junyan

    2016-01-20

    It is important to obtain starch-based homogeneous systems for starch modification. Regarding this, an important key point is to find cheap, low-cost and low-toxicity solvents to allow complete dissolution of starch and its easy regeneration. This study reveals that a ZnCl2 aqueous solution is a good non-derivatizing solvent for starch at 50 °C, and can completely dissolve starch granules. The possible formation of a "zinc-starch complex" might account for the dissolution; and the degradation of starch, which was caused by the H(+) inZnCl2 aqueous solution, could not contribute to full dissolution. From polarized light microscopic observation combined with the solution turbidity results, it was found that the lowest ZnCl2 concentration for full dissolution was 29.6 wt.% at 50 °C, with the dissolving time being 4h. Using Fourier-transform infrared (FTIR), solid state (13)C nuclear magnetic resonance (NMR), and X-ray diffraction (XRD), it was revealed that ZnCl2 solution had no chemical reaction with starch glucosides, but only weakened starch hydrogen bonding and converted the crystalline regions to amorphous regions. In addition, as shown by intrinsic viscosity and thermogravimetric analysis (TGA), ZnCl2 solution caused degradation of starch macromolecules, which was more serious with a higher concentration of ZnCl2 solution.

  5. Adsorption of cadmium from aqueous solutions by perlite.

    Science.gov (United States)

    Mathialagan, T; Viraraghavan, T

    2002-10-14

    The present study examined the use of perlite for the removal of cadmium from aqueous solutions. The effects of pH and contact time on the adsorption process were examined. The optimum pH for adsorption was found to be 6.0. Residual cadmium concentration reached equilibrium in 6h and the rate of cadmium adsorption by perlite was rapid in the first hour of the reaction time. Ho's pseudo-second-order model best described the kinetics of the reaction. Batch adsorption experiments conducted at room temperature (22+/-1 degrees C) showed that the adsorption pattern followed the Freundlich isotherm model. The maximum removal of cadmium obtained from batch studies was 55%. Thomas model was used to describe the adsorption data from column studies. The results generally showed that perlite could be considered as a potential adsorbent for cadmium removal from aqueous solutions.

  6. Removal of methyl violet from aqueous solution by perlite.

    Science.gov (United States)

    Doğan, Mehmet; Alkan, Mahir

    2003-11-01

    The use of perlite for the removal of methyl violet from aqueous solutions at different concentration, pH, and temperature has been investigated. Adsorption equilibrium is reached within 1 h. The capacity of perlite samples for the adsorption of methyl violet was found to increase with increasing pH and temperature and decrease with expansion and increasing acid-activation. The adsorption isotherms are described by means of the Langmuir and Freundlich isotherms. The adsorption isotherm was measured experimentally at different conditions and the experimental data were correlated reasonably well by the adsorption isotherm of Langmuir. The order of heat of adsorption corresponds to a physical reaction. It is concluded that the methyl violet is physically adsorbed onto the perlite. The removal efficiency (P) and dimensionless separation factor (R) have shown that perlite can be used for removal of methyl violet from aqueous solutions, but unexpanded perlite is more effective.

  7. Adsorption Kinetics of Methylene Blue from Aqueous Solutions onto Palygorskite

    Institute of Scientific and Technical Information of China (English)

    PENG Shuchuan; WANG Shisheng; CHEN Tianhu; JIANG Shaotong; HUANG Chuanhui

    2006-01-01

    The adsorption kinetics of methylene blue from aqueous solutions on purified palygorskite was investigated. The kinetics data related to the adsorption of methylene blue from aqueous solutions are in good agreement with the pseudo-second order equation in ranges of initial concentration of 120-210 mg/L, oscillation speed of 100-200 r/min and temperature of 298-328K. The experimental results show that methylene blue is only adsorbed onto the external surface of purified palygorskite,and the apparent adsorption activation energy is 13.92 k J/mol. The relatively low apparent adsorption activation energy suggests that the adsorption of methylene blue involves in not only a chemical, but also a physical adsorption process, and it is controlled by the combination of chemical adsorption and liquid-film diffusion.

  8. A lithium ion battery using an aqueous electrolyte solution

    Science.gov (United States)

    Chang, Zheng; Li, Chunyang; Wang, Yanfang; Chen, Bingwei; Fu, Lijun; Zhu, Yusong; Zhang, Lixin; Wu, Yuping; Huang, Wei

    2016-06-01

    Energy and environmental pollution have become the two major problems in today’s society. The development of green energy storage devices with good safety, high reliability, high energy density and low cost are urgently demanded. Here we report on a lithium ion battery using an aqueous electrolyte solution. It is built up by using graphite coated with gel polymer membrane and LISICON as the negative electrode, and LiFePO4 in aqueous solution as the positive electrode. Its average discharge voltage is up to 3.1 V and energy density based on the two electrode materials is 258 Wh kg‑1. It will be a promising energy storage system with good safety and efficient cooling effects.

  9. Photodegradation of Norfloxacin in aqueous solution containing algae

    Institute of Scientific and Technical Information of China (English)

    Junwei Zhang; Dafang Fu; Jilong Wu

    2012-01-01

    Photodegradation of Norfloxacin in aqueous solution containing algae under a medium pressure mercury lamp (15 W,λmax =365 nm) was investigated.Results indicated that the photodegradation of Norfloxacin could be induced by the algae in the heterogeneous algaewater systems.The photodegradation rate of Norfloxacin increased with increasing algae concentration,and was greatly influenced by the temperature and pH of solution.Meanwhile,the cooperation action of algae and Fe(Ⅲ),and the ultrasound were beneficial to photodegradation of Norfloxaciu.The degradation kinetics of Norfloxacin was found to follow the pseudo zero-order reaction in the suspension of algae.In addition,we discussed the photodegradation mechanism of Norfloxacin in the suspension of algae.This work will be helpful for understanding the photochemical degradation of antibiotics in aqueous environment in the presence of algae,for providing a new method to deal with antibiotics pollution.

  10. Predicting accurate absolute binding energies in aqueous solution

    DEFF Research Database (Denmark)

    Jensen, Jan Halborg

    2015-01-01

    Recent predictions of absolute binding free energies of host-guest complexes in aqueous solution using electronic structure theory have been encouraging for some systems, while other systems remain problematic. In this paper I summarize some of the many factors that could easily contribute 1-3 kcal...... mol(-1) errors at 298 K: three-body dispersion effects, molecular symmetry, anharmonicity, spurious imaginary frequencies, insufficient conformational sampling, wrong or changing ionization states, errors in the solvation free energy of ions, and explicit solvent (and ion) effects that are not well......-represented by continuum models. While I focus on binding free energies in aqueous solution the approach also applies (with minor adjustments) to any free energy difference such as conformational or reaction free energy differences or activation free energies in any solvent....

  11. SWELLING EQUILIBRIUM OF NONIONIC POLYACRYLAMIDE HYDROGEL IN AQUEOUS SALT SOLUTIONS

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A series of nonionic polyacrylamide hydrogels, using acrylamide as monomer and N,N’-methylene diacrylamide as crosslinking agent, were prepared by the free radical polymerization in aqueous solution. Swelling equilibria for the gels were carried out in aqueous solutions of NaCl, KCl, CaCl2, Na2HPO4 and K2HPO4 with concentration ranging from 10-3 to 5mol/kgH2O at 25℃. Experimental results revealed that the chlorides and phosphates cause a different behavior at higher salt concentration. The swelling ratio increases with increasing concentration of chlorides salts, while decreases with the increased phosphates salt concentration. The phenomena seem to be related to the different interactions of chloride and hydrogen phosphate ions with the network groups. Furthermore, the effects of different concentration of crosslinking agent and total monomers on gel swelling performance were also investigated.

  12. Diketopiperazine-mediated peptide formation in aqueous solution

    Science.gov (United States)

    Nagayama, M.; Takaoka, O.; Inomata, K.; Yamagata, Y.

    1990-05-01

    Though diketopiperazines (DKP) are formed in most experiments concerning the prebiotic peptide formation, the molecules have not been paid attention in the studies of chemical evolution. We have found that triglycine, tetraglycine or pentaglycine are formed in aqueous solution of glycine anhydride (DKP) and glycine, diglycine or triglycine, respectively. A reaction of alanine with DKP resulted in the formation of glycylglycylalanine under the same conditions. These results indicate that the formation of the peptide bonds proceeds through the nucleophilic attack of an amino group of the amino acids or the oligoglycines on the DKP accompanied by the ring-opening. The formation of glycine anhydride, di-, tri- and tetraglycine was also observed in a mixed aqueous solution of urea and glycine in an open system to allow the evaporation of ammonia. A probable pathway is proposed for prebiotic peptide formation through diketopiperazine on the primitive Earth.

  13. Photodegradation of Norfloxacin in aqueous solution containing algae.

    Science.gov (United States)

    Zhang, Junwei; Fu, Dafang; Wu, Jilong

    2012-01-01

    Photodegradation of Norfloxacin in aqueous solution containing algae under a medium pressure mercury lamp (15 W, lambda(max) = 365 nm) was investigated. Results indicated that the photodegradation of Norfloxacin could be induced by the algae in the heterogeneous algae-water systems. The photodegradation rate of Norfloxacin increased with increasing algae concentration, and was greatly influenced by the temperature and pH of solution. Meanwhile, the cooperation action of algae and Fe(III), and the ultrasound were beneficial to photodegradation of Norfloxacin. The degradation kinetics of Norfloxacin was found to follow the pseudo zero-order reaction in the suspension of algae. In addition, we discussed the photodegradation mechanism of Norfloxacin in the suspension of algae. This work will be helpful for understanding the photochemical degradation of antibiotics in aqueous environment in the presence of algae, for providing a new method to deal with antibiotics pollution.

  14. Pulse Radiolysis of Adrenaline in Acid Aqueous Solutions

    DEFF Research Database (Denmark)

    Gohn, M.; Getoff, N.; Bjergbakke, Erling

    1976-01-01

    Pulse radiolysis of adrenaline in acid aqueous solutions (pH 1–3) was carried out. The rate constants for the reactions of adrenaline with H and OH were determined: k(H + adr.) = (0·9±0·1) × 109 dm3 mol−1s−1; k(OH + adr.) = (1·65±0·15) × 1010 dm3 mol−1s−1. The H-adduct of adrenaline has two λmax...

  15. Pulse Radiolysis of Methyl Viologen in Aqueous Solutions

    DEFF Research Database (Denmark)

    Solar, S.; Solar, W.; Getoff, N.

    1982-01-01

    Pulse radiolysis of air-free aqueous methyl viologen (MV2+) solutions was carried out at various pH. The attack of e–aq on MV2+, with k(e–aq+ MV2+)= 7.5 × 1010 dm3 mol–1 s–1, leads to the formation of the long-lived radical cation (MV˙+), which possesses two absorption maxima at 392.5 nm (ε392...

  16. Micellization of Zonyl FSN-100 Fluorosurfactant in Aqueous Solutions

    OpenAIRE

    Skvarla, Juraj; Uchman, M.; Procházka, K.; Tošner, Z.; Garamus, V. M.; Pispas, S.; Štěpánek, M.

    2014-01-01

    We report on micellization of nonionic fluorosurfactant Zonyl FSN-100 in aqueous solutions studied by means of NMR spectroscopy, light and small-angle X-ray scattering, surface tension measurements, isothermal titration calorimetry and fluorescence spectroscopy. The results allow for determination of basic parameters of Zonyl FSN-100 association like critical micellar concentration, size and association number of Zonyl FSN-100 micelles which have a core–shell structure with the core of fluoro...

  17. Degradation of α-Naphthol by Plasma in Aqueous Solution

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Degradation of α-naphthol induced by plasma in aqueous solution was investigatedin different initial concentration with contact glow discharge electrolysis(CGDE). The resultsshowed that the degradation of α-naphthol obeyed the first-rate law. Some of predominant products were analyzed by a high performance liquid chromatography (HPLC). A path of α-naphtholdisappearance caused by plasma was proposed according to the detected intermediate products.

  18. Plasma Induced Degradation of Benzidine in Aqueous Solution

    Institute of Scientific and Technical Information of China (English)

    高锦章; 盖克; 杨武; 董彦杰

    2003-01-01

    The degradation of benzidine in aqueous solution by the low temperature plasmawas examined. The results showed that the concentration of medium and the value of pH have anappreciable effect on the degradation of benzidine. What is more important is that iron ions actingas a catalyst play an important role in this reaction. For exploring the degradation mechanismof benzidine, some of the intermediate products were recorded by HPLC(high performance liquidchromatography).

  19. Removal of arsenic from aqueous solution using electrocoagulation.

    Science.gov (United States)

    Balasubramanian, N; Kojima, Toshinori; Basha, C Ahmed; Srinivasakannan, C

    2009-08-15

    Removal of arsenic from aqueous solution was carried out using electrocoagulation. Experiments were conducted using mild steel sacrificial anode covering wide range in operating conditions to assess the removal efficiency. The maximum arsenic removal efficiency was recorded as 94% under optimum condition. The electrocoagulation mechanism of arsenic removal has been developed to understand the effect of applied charge and electrolyte pH on arsenic removal efficiency. Further the experimental data were tested with different adsorption isotherm model to describe the electrocoagulation process.

  20. EXAFS studies of actinide ions in aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Karim, D P; Georgopoulos, P; Knapp, G S

    1979-01-01

    The applicability of the EXAFS technique in the study of actinide systems is discussed. Uranium L/sub III/-edge spectra obtained on an in-lab rotating anode EXAFS facility are presented and analyzed for crystalline UO/sub 2/F/sub 2/ and aqueous solutions containing hexavalent uranium ions. Methods for the extension of the technique to more dilute systems are discussed.

  1. Electrodeposited SnS thin films from aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Zainal, Z.; Hussein, M.Z.; Kassim, A.; Ghazali, A. [University Pertanian Malaysia, Delangor (Malaysia). Dept. of Chemistry

    1997-09-01

    Considerable efforts have been made in recent years in the search for low-cost materials for solar energy conversion. This article describes the cathodic electrodeposition of another promising compound, tin sulphide, from aqueous solution. The deposits were sufficiently uniform and showed strong photoactivity. They were found to be of a p-type semiconductor with a band energy of about 0.9-1.1 eV. (UK)

  2. Adsorption of Copper from Aqueous Solution Using Mango Seed Powder

    OpenAIRE

    Samiksha V. Ashtikar; Amruta D. Parkhi

    2014-01-01

    The objective of the study was the removal of copper metal ions from aqueous solution using mango seed powder as low cost adsorbent. The influences of contact time, adsorbent doses & temperature were studied in batch experiments at room temperature. The results showed that with increase in the contact time percent removal of copper increases. The adsorption was rapid during first 45 minutes & equilibrium was reached in 90 minutes. The results also showed that with increase in ...

  3. Dermal absorption of a dilute aqueous solution of malathion

    Directory of Open Access Journals (Sweden)

    Scharf John

    2008-01-01

    Full Text Available Malathion is an organophosphate pesticide commonly used on field crops, fruit trees, livestock, agriculture, and for mosquito and medfly control. Aerial applications can result in solubilized malathion in swimming pools and other recreational waters that may come into contact with human skin. To evaluate the human skin absorption of malathion for the assessment of risk associated with human exposures to aqueous solutions, human volunteers were selected and exposed to aqueous solutions of malathion. Participants submerged their arms and hands in twenty liters of dilute malathion solution in either a stagnant or stirred state. The "disappearance method" was applied by measuring malathion concentrations in the water before and after human exposure for various periods of time. No measurable skin absorption was detected in 42% of the participants; the remaining 58% of participants measured minimal absorbed doses of malathion. Analyzing these results through the Hazard Index model for recreational swimmer and bather exposure levels typically measured in contaminated swimming pools and surface waters after bait application indicated that these exposures are an order of magnitude less than a minimal dose known to result in a measurable change in acetylcholinesterase activity. It is concluded that exposure to aqueous malathion in recreational waters following aerial bait applications is not appreciably absorbed, does not result in an effective dose, and therefore is not a public health hazard.

  4. Catalytic oxidation of calcium sulfite in solution/aqueous slurry

    Institute of Scientific and Technical Information of China (English)

    WU Xiao-qin; WU Zhong-biao; WANG Da-hui

    2004-01-01

    Forced oxidation of calcium sulfite aqueous slurry is a key step for the calcium-based flue gas desulfurization(FGD) residue. Experiments were conducted in a semi-batch system and a continuous flow system on lab scales. The main reactor in semi-batch system is a 1000 ml volume flask. It has five necks for continuous feeding of gas and a batch of calcium sulfite solution/aqueous slurry. In continuous flow system, the main part is a jacketed Pyrex glass reactor in which gas and solution/aqueous slurry are fed continuously. Calcium sulfite oxidation is a series of complex free-radical reactions. According to experimental results and literature data, the reactions are influenced significantly by manganese as catalyst. At low concentration of manganese and calcium sulfite, the reaction rate is dependent on 1.5 order of sulfite concentration, 0.5 order of manganese concentration, and zero order of oxygen concentration in which the oxidation is controlled by chemical kinetics. With concentrations of calcium sulfite and manganese increasing, the reactions are independent gradually on the constituents in solution but are impacted by oxygen concentration. Manganese can accelerate the free-radical reactions, and then enhances the mass transfer of oxygen from gas to liquid. The critical concentration of calcium sulfite is 0.007 mol/L, manganese is 10-4 mol/L, and oxygen is of 0.2-0.4 atm.

  5. Removal of fluoride ions from aqueous solution by waste mud

    Energy Technology Data Exchange (ETDEWEB)

    Kemer, Baris; Ozdes, Duygu; Gundogdu, Ali; Bulut, Volkan N.; Duran, Celal [Karadeniz Technical University, Faculty of Arts and Sciences, Department of Chemistry, 61080 Trabzon (Turkey); Soylak, Mustafa, E-mail: soylak@erciyes.edu.tr [Erciyes University, Faculty of Arts and Sciences, Department of Chemistry, 38039 Kayseri (Turkey)

    2009-09-15

    The present study was carried out to assess the ability of original waste mud (o-WM) and different types of activated waste mud which are acid-activated (a-WM) and precipitated waste mud (p-WM), in order to remove excess of fluoride from aqueous solution by using batch technique. The p-WM exhibited greater performance than the others. Adsorption studies were conducted as a function of pH, contact time, initial fluoride concentration, adsorbent concentration, temperature, etc. Studies were also performed to understand the effect of some co-existing ions present in aqueous solutions. Adsorption process was found to be almost independent of pH for all types of waste mud. Among the kinetic models tested for p-WM, pseudo-second-order model fitted the kinetic data well with a perfect correlation coefficient value of 1.00. It was found that the adequate time for the adsorption equilibrium of fluoride was only 1 h. Thermodynamic parameters including the Gibbs free energy ({Delta}G{sup o}), enthalpy ({Delta}H{sup o}), and entropy ({Delta}S{sup o}) revealed that adsorption of fluoride ions on the p-WM was feasible, spontaneous and endothermic in the temperature range of 0-40 deg. C. Experimental data showed a good fit with the Langmuir and Freundlich adsorption isotherm models. Results of this study demonstrated the effectiveness and feasibility of WM for removal of fluoride ions from aqueous solution.

  6. Application of Ionic Liquids for Tc Recovery from Aqueous Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Stepinski, Dominique C.; Shkrob, Ilya A.; Vandegrift, George F. [Argonne National Laboratory, Chemical Sciences and Engineering Division, 9700 S. Cass Ave, Argonne, IL 60439 (United States); Wishart, James F. [Brookhaven National Laboratory (United States); Dietz, Mark L. [University of Wisconsin at Milwaukee (United States)

    2009-06-15

    Removal of technetium (Tc) from spent fuel waste is important because of its high mobility and long half-life. Current method of removal of Tc(VII) from the Tc product stream of the UREX process is a lengthy and complicated process which involves a multi-step chemical reduction of Tc from aqueous solution. Ionic liquids (ILs) have a potential to simplify separation and reduction of Tc from spent fuel streams. Studies of the extraction of actinides and fission products into ILs have demonstrated that these solvents can yield metal ion extraction efficiencies far exceeding those obtained in conventional liquid-liquid systems. Furthermore, ionic liquids are finding an increasing number of applications in electrodeposition of metals as their electrochemical window can reach more than 4 V and thus gives access to a number of elements that can not be electrodeposited from aqueous solutions. These finding suggest that ionic liquids can be used for separation of pertechnetate and subsequent electrodeposition on an electrode, to produce a metallic waste form. In this presentation we will present our progress on examining ionic liquids based extraction media for the separation of Tc(VII) from aqueous ammonia solutions. (authors)

  7. Removal of fluoride ions from aqueous solution by waste mud.

    Science.gov (United States)

    Kemer, Baris; Ozdes, Duygu; Gundogdu, Ali; Bulut, Volkan N; Duran, Celal; Soylak, Mustafa

    2009-09-15

    The present study was carried out to assess the ability of original waste mud (o-WM) and different types of activated waste mud which are acid-activated (a-WM) and precipitated waste mud (p-WM), in order to remove excess of fluoride from aqueous solution by using batch technique. The p-WM exhibited greater performance than the others. Adsorption studies were conducted as a function of pH, contact time, initial fluoride concentration, adsorbent concentration, temperature, etc. Studies were also performed to understand the effect of some co-existing ions present in aqueous solutions. Adsorption process was found to be almost independent of pH for all types of waste mud. Among the kinetic models tested for p-WM, pseudo-second-order model fitted the kinetic data well with a perfect correlation coefficient value of 1.00. It was found that the adequate time for the adsorption equilibrium of fluoride was only 1h. Thermodynamic parameters including the Gibbs free energy (DeltaG degrees ), enthalpy (DeltaH degrees ), and entropy (DeltaS degrees ) revealed that adsorption of fluoride ions on the p-WM was feasible, spontaneous and endothermic in the temperature range of 0-40 degrees C. Experimental data showed a good fit with the Langmuir and Freundlich adsorption isotherm models. Results of this study demonstrated the effectiveness and feasibility of WM for removal of fluoride ions from aqueous solution.

  8. Radiolysis of berberine or palmatine in aqueous solution

    Science.gov (United States)

    Marszalek, Milena; Wolszczak, Marian

    2011-01-01

    The reactions of hydrated electron (eaq-), hydrogen atom (H rad ) (reducing species) and Cl2•-, Br2•-, N,O•H radicals (oxidizing species) with berberine or palmatine in aqueous solution have been studied by steady-state and pulse radiolysis. The spectra of transient intermediates, leading to the final products, are presented. The rate constants of the reaction of eaq- and rad OH radical with both alkaloids in the homogenous solution and in the presence of DNA are reported. It is demonstrated that the primary products of the reaction of berberine and palmatine with eaq- and radicals generated during radiolysis are unstable and undergo further reactions.

  9. Analysis and modeling of alkali halide aqueous solutions

    DEFF Research Database (Denmark)

    Kim, Sun Hyung; Anantpinijwatna, Amata; Kang, Jeong Won;

    2016-01-01

    A new model is proposed for correlation and prediction of thermodynamic properties of electrolyte solutions. In the proposed model, terms of a second virial coefficient-type and of a KT-UNIFAC model are used to account for a contribution of binary interactions between ion and ion, and water and ion...... on calculations for various electrolyte properties of alkali halide aqueous solutions such as mean ionic activity coefficients, osmotic coefficients, and salt solubilities. The model covers highly nonideal electrolyte systems such as lithium chloride, lithium bromide and lithium iodide, that is, systems...

  10. Direct photolysis of nitroaromatic compounds in aqueous solutions

    Institute of Scientific and Technical Information of China (English)

    CHEN Bing; YANG Chun; GOH Ngoh Khang

    2005-01-01

    The direct photolysis of nitrobenzene and nitrophenols in aqueous solutions irradiated by polychromatic light were investigated.Several aromatic intermediates were identified as three nitrophenol isomers, nitrohydroquinone, nitrosobenzene, nitrocatechol, catechol and phenol. Nitrite and nitrate ions were also detected in the irradiated solution indicating direct photolysis of nitrobenzene or nitrophenols.The degradation of nitrobenzene and nitrophenols and the formation of three nitrophenol isomers were observed to follow zero-order kinetics. The quantum yields for nitrobenzene and nitrophenols removal are about 10-3 and 10-3-10-4 respectively. The mechanism for nitrobenzene degradation was suggested to follow mainly nitro-nitrite intramolecular arrangement.

  11. Radiolytic degradation of atrazine aqueous solution containing humic substances.

    Science.gov (United States)

    Basfar, A A; Mohamed, K A; Al-Abduly, A J; Al-Shahrani, A A

    2009-03-01

    Degradation of atrazine herbicide in humic substances (HS) aqueous solutions and distilled water solutions was investigated on a laboratory scale upon gamma-irradiation from a (60)Co source. In addition, the effect of ionizing radiation on the atrazine residues removal efficiency was investigated in relation to degradation of by-products. gamma-Irradiation experiments were carried out for three targeted concentrations (i.e. 0.464, 2.318 and 4.636 microM) with doses over the range 0.1-60 kGy. The initial concentration of herbicide, scavengers and irradiation doses play a significant role in the degradation efficiency as shown by decay constants of atrazine residues. gamma-Radiolysis showed that atrazine exhibited high degradation percentages at low absorbed doses in HS aqueous solutions compared to distilled water solutions. Absorbed doses from 0.6 to 21 kGy and from 6 to 72 kGy at a dose rate of 14.52 kGyh(-1) achieved 90% degradation for atrazine with initial concentrations over the range 0.464-4.636 microM in humic and distilled water solutions, respectively. The radiolytic degradation by-products and their mass balances were qualitatively determined with good confidence using gas chromatography/quadruple mass spectrometry (GC/MS) with electron impact ionization (EI(+)) mode.

  12. Photodegradation in Micellar Aqueous Solutions of Erythrosin Esters Derivatives.

    Science.gov (United States)

    Herculano, Leandro Silva; Lukasievicz, Gustavo Vinicius Bassi; Sehn, Elizandra; Caetano, Wilker; Pellosi, Diogo Silva; Hioka, Noboru; Astrath, Nelson Guilherme Castelli; Malacarne, Luis Carlos

    2015-07-01

    Strong light absorption and high levels of singlet oxygen production indicate erythrosin B as a viable candidate as a photosensitizer in photodynamic therapy or photodynamic inactivation of microorganisms. Under light irradiation, erythrosin B undergoes a photobleaching process that can decrease the production of singlet oxygen. In this paper, we use thermal lens spectroscopy to investigate photobleaching in micellar solutions of erythrosin ester derivatives: methyl, butyl, and decyl esters in low concentrations of non-ionic micellar aqueous solutions. Using a previously developed thermal lens model, it was possible to determine the photobleaching rate and fluorescence quantum efficiency for dye-micelle solutions. The results suggest that photobleaching is related to the intensity of the dye-micelle interaction and demonstrate that the thermal lens technique can be used as a sensitive tool for quantitative measurement of photochemical properties in very diluted solutions.

  13. On the structure of an aqueous propylene glycol solution

    Science.gov (United States)

    Rhys, Natasha H.; Gillams, Richard J.; Collins, Louise E.; Callear, Samantha K.; Lawrence, M. Jayne; McLain, Sylvia E.

    2016-12-01

    Using a combination of neutron diffraction and empirical potential structure refinement computational modelling, the interactions in a 30 mol. % aqueous solution of propylene glycol (PG), which govern both the hydration and association of this molecule in solution, have been assessed. From this work it appears that PG is readily hydrated, where the most prevalent hydration interactions were found to be through both the PG hydroxyl groups but also alkyl groups typically considered hydrophobic. Hydration interactions of PG dominate the solution over PG self-self interactions and there is no evidence of more extensive association. This hydration behavior for PG in solutions suggests that the preference of PG to be hydrated rather than to be self-associated may translate into a preference for PG to bind to lipids rather than itself, providing a potential explanation for how PG is able to enhance the apparent solubility of drug molecules in vivo.

  14. Structure of concentrated aqueous solutions of scandium chloride

    Science.gov (United States)

    Smirnov, P. R.; Grechin, O. V.

    2017-03-01

    It is shown via X-ray diffraction that aqueous solutions of scandium chloride form ionic associates in a wide range of concentrations. It is established that the Sc3+ ion coordination number increases upon dilution to 8.2 at an unchanged Sc3+-OH2 distance of 0.215 nm. The second coordination sphere of the cation forms at an average distance of 0.420 nm. The number of solvent molecules in the sphere logically increases during dilution. It is concluded that the anion does not form its own sphere in highly concentrated solutions. This coordination sphere begins to form only in solutions with moderate concentrations at a distance of 0.315 nm, and it contains six water molecules in diluted solutions.

  15. Corrosion behavior of bulk metallic glasses in different aqueous solutions

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The corrosion behavior of as-cast fully amorphous, structural relaxed amorphous and crystallized Fe65.5Cr4Mo4Ga4P12C5B5.5 bulk metallic glasses (BMGs) in NaCl, HCl and NaOH solutions was investigated by electrochemical polarization and immersion methods. X-ray photoelectron spectroscopy measurements was used to analyze the changes of the elements on the alloy surface before and after immersion in various solutions. The corrosion resistance of the Fe65.5Cr4Mo4Ga4P12C5B5.5 BMG was better than its structural relaxation/crystallization counterparts and common alloys (such as stainless steel, carbonized steel, and steel) in the selected aqueous solutions. The high corrosion resistance of this alloy in corrosive solutions leads to the formation of Fe-, Cr- and Mo-enriched protective thin surface films.

  16. Hydrate phase equilibria of CO2+N2+aqueous solution of THF, TBAB or TBAF system

    DEFF Research Database (Denmark)

    Sfaxi, Imen Ben Attouche; Durand, Isabelle; Lugo, Rafael

    2014-01-01

    We report hydrate dissociation conditions of CO2 (15 and 30mol%)+N2 (85 and 70mol%) in the presence of aqueous solutions of THF, TBAB or TBAF. The concentrations of TBAB and TBAF in the aqueous solutions are 5wt% and 9wt% while THF concentration in aqueous solution is 3mol%. Two different experim...

  17. Adsorption of nicotine on different zeolite types, from aqueous solutions

    Directory of Open Access Journals (Sweden)

    Stošić Dušan K.

    2007-01-01

    Full Text Available The plant alkaloid, nicotine, is a strongly toxic heterocyclic compound: the lethal dose for an adult human being (40-60 mg is importantly lower in comparison with the other known poisons such as arsenic or strychni­ne. Cigarettes represent "the most toxic and addictive form of nicotine". Besides the negative effects of nicotine on public health produced by self-administration, recently another potentially very dangerous effect has been recognized: because of its miscibility with water, nicotine can be found in industrial wastewaters, and consequently, in groundwater. Therefore, the problem of nicotine removal from aqueous solutions has became an interesting topic. In this work, the removal of nicotine has been probed by adsorption on solid materials. Adsorption of nicotine on different zeolites (clinoptilolite, ZSM-5 and β zeolite and on activated carbon was investigated from aqueous solutions, at 298 K. The obtained results are presented as adsorption isotherms: the amount of adsorbed nicotine as a function of equilibrium concentration. These data were obtained from the residual amount of nicotine in the aqueous phase, by the use of UV spectroscopy. The highest amounts of adsorbed nicotine was found for activated carbon and p zeolite (~ mmol·g-1. The attempt to modify the adsorption properties of ZSM-5 zeolite has been also done: ZSM-5 was modified by ion-exchange with VIII group metal (Cu2+ and Fe3+. In addition, the adsorption of nicotine on ZSM-5 zeolite with different Si/Al ratios has been done. It has been noticed that ion-exchange did not improve the adsorption possibilities, while the adsorption was importantly lower in the case of higher silicon content in ZMS-5 structure. 13C NMR spectra were collected for suspensions formed of solid adsorbent and aqueous solution of nicotine; in this way, the part of nicotine molecule which is most probably connected with the adsorbent was recognized.

  18. The Gibbs-free-energy landscape for the solute association in nanoconfined aqueous solutions

    Institute of Scientific and Technical Information of China (English)

    赵亮; 王春雷; 方海平; 涂育松

    2015-01-01

    The theoretical model and the numerical analyses on the Gibbs-free-energy of the association states of am-phiphilic molecules in nanoconfined aqueous solutions are presented in detail. We exhibit the continuous change of the Gibbs-free-energy trend, which plays a critical role in the association states of the system transforming from the dispersion state, through the “reversible state”, and finally to the aggregation state in amphiphilic molecule solutions. Furthermore, for the“reversible state”, we present the difference in the free-energy bar-rier heights of the dispersion state and aggregation state, resulting from the competition between the entropy, which makes the solute molecules evenly disperse in the solution and the energy contribution driving the am-phiphilic molecules to aggregate into a larger cluster. These findings provide a comprehensive understanding of confinement effects on the solute association processes in aqueous solutions and may further improve the techniques of material fabrication.

  19. RHEOLOGICAL BEHAVIOR OF ERWINIA GUM IN AQUEOUS SOLUTION

    Institute of Scientific and Technical Information of China (English)

    Li-na Zhang; Mei Zhang; Jing-hua Chen; Hideki Iijima; Hiromichi Tsuchiya

    1999-01-01

    Erwinia (E) gum, an extracellular polysaccharide, is composed of fucose, galatose, glucose and glucuronic acid. Its viscosity behavior was investigated by a low-shear-rate multiball viscometer and a rotational viscometer. Its weight-average molecular weight Mw and intrinsic viscosity [η] in 0.2 mol/L NaCl aqueous solution were measured by light scattering method at 35℃ and viscometry at 25℃ and found to be 1.06 × 106 g/mol and 1050 mL/g, respectively, and its aggregates in aqueous solution were proved by gel permeation chromatography (GPC). These results indicated that E gum in water has exceedingly high viscosity and exhibits Binham fluid behavior, owing to its aggregation. The viscosity of E gum decreased with increasing temperature, and the turning point appeared at 38℃ for dilute solution and 80℃ for concentrated solution suggesting that the aggregates of E gum in water started to disaggregate under these temperatures. In addition, the aggregates can be disrupted by adding either acid or base. The experimental results indicated that the E gum is a good thickening agent, and its fluid behavior is similar to xanthan.

  20. Monte Carlo Simulation of Aqueous Dilute Solutions of Polyhydric Alcohols

    Science.gov (United States)

    Lilly, Arnys Clifton, Jr.

    In order to investigate the details of hydrogen bonding and solution molecular conformation of complex alcohols in water, isobaric-isothermal Monte Carlo simulations were carried out on several systems. The solutes investigated were ethanol, ethylene glycol, 1,2-propylene glycol, 1,3 -propylene glycol and glycerol. In addition, propane, which does not hydrogen bond but does form water hydrates, was simulated in aqueous solution. The complex alcohol-water systems are very nonideal in their behavior as a function of solute concentration down to very dilute solutions. The water model employed was TIP4P water^1 and the intermolecular potentials employed are of the Jorgensen type^2 in which the interactions between the molecules are represented by interaction sites usually located on nuclei. The interactions are represented by a sum of Coulomb and Lennard-Jones terms between all intermolecular pairs of sites. Intramolecular rotations in the solute are modeled by torsional potential energy functions taken from ethanol, 1-propanol and 2-propanol for C-O and C-C bond rotations. Quasi-component pair correlation functions were used to analyze the hydrogen bonding. Hydrogen bonds were classified as proton acceptor and proton donor bonds by analyzing the nearest neighbor pair correlation function between hydroxyl oxygen and hydrogen and between solvent-water hydrogen and oxygen. The results obtained for partial molar heats of solution are more negative than experimental values by 3.0 to 14 kcal/mol. In solution, all solutes reached a contracted molecular geometry with the OH groups generally on one side of the molecule. There is a tendency for the solute OH groups to hydrogen bond with water, with more proton acceptor bonds than proton donor bonds. The water -solute binding energies correlate with experimental measurements of the water-binding properties of the solute. ftn ^1Jorgensen, W. L. et al, J. Chem. Phys., 79, 926 (1983). ^2Jorgensen, W. L., J. Phys Chem., 87, 5304

  1. Beryllium Chelation by Dicarboxylic Acids in Aqueous Solution.

    Science.gov (United States)

    Schmidt, Michael; Bauer, Andreas; Schmidbaur, Hubert

    1997-05-07

    Maleic and phthalic acids are found to react with Be(OH)(2), generated in situ from BeSO(4)(aq) and Ba(OH)(2)(aq), in aqueous solution at pH 3.0 or 4.4, respectively (25 degrees C), to give solutions containing the complexes (H(2)O)(2)Be[(OOCCH)(2)] (1) and (H(2)O)(2)Be[(OOC)(2)C(6)H(4)] (3). The products can be isolated in high yield and identified by microanalytical data. With 2 equiv of the dicarboxylic acids and the pH adjusted to 5.5 and 5.9, respectively, by addition of ammonia, the bis-chelate complexes [(NH(4))(+)](2){[Be[(OOCCH)(2)](2)}(2)(-) (2) and [(NH(4))(+)](2){Be[(OOC)(2)C(6)H(4)](2)}(2)(-) (4) are obtained, which can also be isolated. The compounds show distinct (9)Be, (1)H, and (13)C resonances in their NMR spectra in aqueous solutions. Layering of an aqueous solution of compound 4 with acetone at ambient temperature leads to the precipitation of single crystals suitable for an X-ray structure determination. This salt (5) was found to contain the bis-chelated dianion {Be[(OOC)(2)C(6)H(4)](2)}(2)(-) with the beryllium atom in the spiro center of two seven-membered rings and an overall geometry approaching closely C(2) symmetry. These anions are associated with two crystallographically independent but structurally similar counterions [MeC(O)CH(2)CMe(2)NH(3)](+), which are the product of a condensation reaction of the ammonium cation with the acetone solvent. In the crystal the ammonium hydrogen atoms of the cations form N-H.O hydrogen bonds with the oxo functions of the dianion.

  2. Nano particles@Calix arenas via aqueous solution

    Directory of Open Access Journals (Sweden)

    Sahar Dehghani

    2016-05-01

    Full Text Available The electronic structure and magnetic properties of Al2O3, GaN and Fe3O4@ Calix (8 COOH have been studied using ONIOM and DFT methods. The studies focus on how to improve the adsorption of some nano particles solution aqueous for achieving good magnetic and functionalized potential performances. The results revealed that the Fe3O4@ Calix (8 COOH and some of its derivations exhibited better thermodynamic stability. Furthermore, the particle size and magnetic property of the GaN@ Calix (8 COOH nano particles can be controlled by the aqueous. The electrical properties such as NMR Shielding, electron densities, energy densities, potential energy densities, ELF, LOL, ellipticity of electron density, eta index and ECP for nano particles@ Calix (8COOH have been calculated.

  3. Separation characteristics of alcohol from aqueous solution by ultrasonic atomization.

    Science.gov (United States)

    Yasuda, Keiji; Mochida, Kyosuke; Asakura, Yoshiyuki; Koda, Shinobu

    2014-11-01

    The generation rate of ultrasonically atomized droplets and the alcohol concentration in droplets were estimated by measuring the flow rate and the alcohol concentration of vapors from a bulk solution with a fountain. The effect of the alcohol concentration in the bulk solution on the generation rate of droplets and the alcohol concentration in droplets were investigated. The ultrasonic frequency was 2.4MHz, and ethanol and methanol aqueous solutions were used as samples. The generation rate of droplets for ethanol was smaller than that for methanol at the same alcohol molar fraction in the bulk solution. For both solutions, at low alcohol concentration in the bulk solution, the alcohol concentration in droplets was lower than that in vapors and the atomized droplets were visible. On the other side, at high concentration, the concentration in droplets exceeded that in vapors and the atomized droplets became invisible. These results could be explained that the alcohol-rich clusters in the bulk solution were preferentially atomized by ultrasonic irradiation. The concentration in droplets for ethanol was higher than that for methanol at low alcohol concentration because the amount of alcohol-rich clusters was larger. When the alcohol molar fraction was greater than 0.6, the atomized droplets almost consisted of pure alcohol.

  4. Rapid structural analysis of nanomaterials in aqueous solutions

    Science.gov (United States)

    Ryuzaki, Sou; Tsutsui, Makusu; He, Yuhui; Yokota, Kazumichi; Arima, Akihide; Morikawa, Takanori; Taniguchi, Masateru; Kawai, Tomoji

    2017-04-01

    Rapid structural analysis of nanoscale matter in a liquid environment represents innovative technologies that reveal the identities and functions of biologically important molecules. However, there is currently no method with high spatio-temporal resolution that can scan individual particles in solutions to gain structural information. Here we report the development of a nanopore platform realizing quantitative structural analysis for suspended nanomaterials in solutions with a high z-axis and xy-plane spatial resolution of 35.8 ± 1.1 and 12 nm, respectively. We used a low thickness-to-diameter aspect ratio pore architecture for achieving cross sectional areas of analyte (i.e. tomograms). Combining this with multiphysics simulation methods to translate ionic current data into tomograms, we demonstrated rapid structural analysis of single polystyrene (Pst) beads and single dumbbell-like Pst beads in aqueous solutions.

  5. Hydrogen bond breaking in aqueous solutions near the critical point

    Science.gov (United States)

    Mayanovic, Robert A.; Anderson, Alan J.; Bassett, William A.; Chou, I.-Ming

    2001-01-01

    The nature of water-anion bonding is examined using X-ray absorption fine structure spectroscopy on a 1mZnBr2/6m NaBr aqueous solution, to near critical conditions. Analyses show that upon heating the solution from 25??C to 500??C, a 63% reduction of waters occurs in the solvation shell of ZnBr42-, which is the predominant complex at all pressure-temperature conditions investigated. A similar reduction in the hydration shell of waters in the Br- aqua ion was found. Our results indicate that the water-anion and water-water bond breaking mechanisms occurring at high temperatures are essentially the same. This is consistent with the hydration waters being weakly hydrogen bonded to halide anions in electrolyte solutions. ?? 2001 Elsevier Science B.V.

  6. Preparation of fluorescent polyaniline nanoparticles in aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Kleber G. B. [Universidade Federal de Pernambuco, Departamento de Engenharia Mecanica (Brazil); Melo, Etelino F. de [Universidade Federal de Pernambuco, Departamento de Quimica Fundamental (Brazil); Andrade, Cesar A. S. [Universidade Federal de Pernambuco, Departamento de Bioquimica (Brazil); Melo, Celso P. de, E-mail: celso@df.ufpe.br [Universidade Federal de Pernambuco, Departamento de Fisica (Brazil)

    2013-01-15

    We report the synthesis of stable polyaniline nanoparticles (PANI{sub N}Ps) based on the chemical oxidative polymerization of aniline in aqueous solutions of surfactants. Surfactants of three different types-cationic (dodecyltrimethylammonium bromide-DTAB), anionic (sodium dodecyl sulfate-SDS), and non-ionic (Triton X-405-TX-405)-were used. The resulting PANI{sub N}Ps{sub s}urfactant samples were characterized through UV-Vis, fluorescence and Fourier transform infrared spectroscopies, and scanning electronic microscopy (SEM). We have verified that the color of the PANI{sub N}Ps{sub s}urfactant dispersions is affected by a change in the pH of the solution. The PANI-NPs{sub s}urfactant colloidal suspensions in aqueous solution present a surprising high fluorescence quantum yield value (ranging from 1.9 Multiplication-Sign 10{sup -3} to 6.9 Multiplication-Sign 10{sup -3}) that can be controlled as a function of the pH, a fact that we associate to the corresponding protonation degree of the PANI polymeric chains. We suggest that these fluorescent nanocomposites can find important technological applications in different areas such as organic light emitting devices, biosensors, and pigments for coatings.

  7. Removal of Cholera Toxin from Aqueous Solution by Probiotic Bacteria

    Directory of Open Access Journals (Sweden)

    Jussi A. O. Meriluoto

    2012-06-01

    Full Text Available Cholera remains a serious health problem, especially in developing countries where basic hygiene standards are not met. The symptoms of cholera are caused by cholera toxin, an enterotoxin, which is produced by the bacterium Vibrio cholerae. We have recently shown that human probiotic bacteria are capable of removing cyanobacterial toxins from aqueous solutions. In the present study we investigate the ability of the human probiotic bacteria, Lactobacillus rhamnosus strain GG (ATCC 53103 and Bifidobacterium longum 46 (DSM 14583, to remove cholera toxin from solution in vitro. Lactobacillus rhamnosus strain GG and Bifidobacterium longum 46 were able to remove 68% and 59% of cholera toxin from aqueous solutions during 18 h of incubation at 37 °C, respectively. The effect was dependent on bacterial concentration and L. rhamnosus GG was more effective at lower bacterial concentrations. No significant effect on cholera toxin concentration was observed when nonviable bacteria or bacterial supernatant was used.

  8. Structural and dynamical properties of hydrogen fluoride in aqueous solution: an ab initio quantum mechanical charge field molecular dynamics simulation.

    Science.gov (United States)

    Kritayakornupong, Chinapong; Vchirawongkwin, Viwat; Hofer, Thomas S; Rode, Bernd M

    2008-09-25

    The novel ab initio quantum mechanical charge field (QMCF) molecular dynamics simulation at the Hartree-Fock level has been employed to investigate hydration structure and dynamics of hydrogen fluoride in aqueous solution. The average H-F bond length of 0.93 A obtained from the QMCF MD simulation is in good agreement with the experimental data. The HHF...Ow distance of 1.62 A was evaluated for the first hydration shell, and 2.00 A was observed for the FHF...Hw distance. The stability of hydrogen bonding is more pronounced in the hydrogen site of hydrogen fluoride, with a single water molecule in this part of the first hydration shell. A wide range of coordination numbers between 3 and 9 with an average value of 5.6 was obtained for the fluorine site. The force constants of 819.1 and 5.9 N/m were obtained for the HHF-FHF and HHF...Ow interactions, respectively, proving the stability of the nondissociated form of hydrogen fluoride in aqueous solution. The mean residence times of 2.1 and 2.5 ps were determined for ligand exchange processes in the neighborhood of fluorine and hydrogen atoms of hydrogen fluoride, respectively, indicating a weak structure-making effect of hydrogen fluoride in water. The corresponding H-bond lifetimes attribute this effect to the H atom site of HF.

  9. Lubrication, adsorption, and rheology of aqueous polysaccharide solutions.

    Science.gov (United States)

    Stokes, Jason R; Macakova, Lubica; Chojnicka-Paszun, Agnieszka; de Kruif, Cornelis G; de Jongh, Harmen H J

    2011-04-05

    Aqueous lubrication is currently at the forefront of tribological research due to the desire to learn and potentially mimic how nature lubricates biotribological contacts. We focus here on understanding the lubrication properties of naturally occurring polysaccharides in aqueous solution using a combination of tribology, adsorption, and rheology. The polysaccharides include pectin, xanthan gum, gellan, and locus bean gum that are all widely used in food and nonfood applications. They form rheologically complex fluids in aqueous solution that are both shear thinning and elastic, and their normal stress differences at high shear rates are found to be characteristic of semiflexible/rigid molecules. Lubrication is studied using a ball-on-disk tribometer with hydrophobic elastomer surfaces, mimicking biotribological contacts, and the friction coefficient is measured as a function of speed across the boundary, mixed, and hydrodynamic lubrication regimes. The hydrodynamic regime, where the friction coefficient increases with increasing lubricant entrainment speed, is found to depend on the viscosity of the polysaccharide solutions at shear rates of around 10(4) s(-1). The boundary regime, which occurs at the lowest entrainment speeds, depends on the adsorption of polymer to the substrate. In this regime, the friction coefficient for a rough substrate (400 nm rms roughness) is dependent on the dry mass of polymer adsorbed to the surface (obtained from surface plasmon resonance), while for a smooth substrate (10 nm rms roughness) the friction coefficient is strongly dependent on the hydrated wet mass of adsorbed polymer (obtained from quartz crystal microbalance, QCM-D). The mixed regime is dependent on both the adsorbed film properties and lubricant's viscosity at high shear rates. In addition, the entrainment speed where the friction coefficient is a minimum, which corresponds to the transition between the hydrodynamic and mixed regime, correlates linearly with the ratio

  10. NMR studies of proton exchange kinetics in aqueous formaldehyde solutions

    Science.gov (United States)

    Rivlin, Michal; Eliav, Uzi; Navon, Gil

    2014-05-01

    Aqueous solutions of formaldehyde, formalin, are commonly used for tissue fixation and preservation. Treatment with formalin is known to shorten the tissue transverse relaxation time T2. Part of this shortening is due to the effect of formalin on the water T2. In the present work we show that the shortening of water T2 is a result of proton exchange between water and the major constituent of aqueous solutions of formaldehyde, methylene glycol. We report the observation of the signal of the hydroxyl protons of methylene glycol at 2 ppm to high frequency of the water signal that can be seen at low temperatures and at pH range of 6.0 ± 1.5 and, at conditions where it cannot be observed by the single pulse experiment, it can be detected indirectly through the water signal by the chemical exchange saturation transfer (CEST) experiment. The above finding made it possible to obtain the exchange rate between the hydroxyl protons of the methylene glycol and water in aqueous formaldehyde solutions, either using the dispersion of the spin-lattice relaxation rate in the rotating frame (1/T1ρ) or, at the slow exchange regime, from the line width hydroxyl protons of methylene glycol. The exchange rate was ∼104 s-1 at pH 7.4 and 37 °C, the activation energy, 50.2 kJ/mol and its pH dependence at 1.1 °C was fitted to: k (s-1) = 520 + 6.5 × 107[H+] + 3.0 × 109[OH-].

  11. Characterization of aqueous silver nitrate solutions for leakage tests

    Directory of Open Access Journals (Sweden)

    José Ferreira Costa

    2011-06-01

    Full Text Available OBJECTIVE: To determine the pH over a period of 168 h and the ionic silver content in various concentrations and post-preparation times of aqueous silver nitrate solutions. Also, the possible effects of these factors on microleakage test in adhesive/resin restorations in primary and permanent teeth were evaluated. MATERIAL AND METHODS: A digital pHmeter was used for measuring the pH of the solutions prepared with three types of water (purified, deionized or distilled and three brands of silver nitrate salt (Merck, Synth or Cennabras at 0, 1, 2, 24, 48, 72, 96 and 168 h after preparation, and storage in transparent or dark bottles. Ionic silver was assayed according to the post-preparation times (2, 24, 48, 72, 96, 168 h and concentrations (1, 5, 25, 50% of solutions by atomic emission spectrometry. For each sample of each condition, three readings were obtained for calculating the mean value. Class V cavities were prepared with enamel margins on primary and permanent teeth and restored with the adhesive systems OptiBond FL or OptiBond SOLO Plus SE and the composite resin Filtek Z-250. After nail polish coverage, the permanent teeth were immersed in 25% or 50% AgNO3 solution and the primary teeth in 5% or 50% AgNO3 solutions for microleakage evaluation. ANOVA and the Tukey's test were used for data analyses (α=5%. RESULTS: The mean pH of the solutions ranged from neutral to alkaline (7.9±2.2 to 11.8±0.9. Mean ionic silver content differed depending on the concentration of the solution (4.75±0.5 to 293±15.3 ppm. In the microleakage test, significant difference was only observed for the adhesive system factor (p=0.000. CONCLUSIONS: Under the tested experimental conditions and based on the obtained results, it may be concluded that the aqueous AgNO3 solutions: have neutral/alkaline pH and service life of up to 168 h; the level of ionic silver is proportional to the concentration of the solution; even at 5% concentration, the solutions were

  12. Characterization of aqueous silver nitrate solutions for leakage tests

    Science.gov (United States)

    COSTA, José Ferreira; SIQUEIRA, Walter Luiz; LOGUERCIO, Alessandro Dourado; REIS, Alessandra; de OLIVEIRA, Elizabeth; ALVES, Cláudia Maria Coelho; BAUER, José Roberto de Oliveira; GRANDE, Rosa Helena Miranda

    2011-01-01

    Objectives To determine the pH over a period of 168 h and the ionic silver content in various concentrations and post-preparation times of aqueous silver nitrate solutions. Also, the possible effects of these factors on microleakage test in adhesive/resin restorations in primary and permanent teeth were evaluated. Material and Methods A digital pHmeter was used for measuring the pH of the solutions prepared with three types of water (purified, deionized or distilled) and three brands of silver nitrate salt (Merck, Synth or Cennabras) at 0, 1, 2, 24, 48, 72, 96 and 168 h after preparation, and storage in transparent or dark bottles. Ionic silver was assayed according to the post-preparation times (2, 24, 48, 72, 96, 168 h) and concentrations (1, 5, 25, 50%) of solutions by atomic emission spectrometry. For each sample of each condition, three readings were obtained for calculating the mean value. Class V cavities were prepared with enamel margins on primary and permanent teeth and restored with the adhesive systems OptiBond FL or OptiBond SOLO Plus SE and the composite resin Filtek Z-250. After nail polish coverage, the permanent teeth were immersed in 25% or 50% AgNO3 solution and the primary teeth in 5% or 50% AgNO3 solutions for microleakage evaluation. ANOVA and the Tukey's test were used for data analyses (α=5%). Results The mean pH of the solutions ranged from neutral to alkaline (7.9±2.2 to 11.8±0.9). Mean ionic silver content differed depending on the concentration of the solution (4.75±0.5 to 293±15.3 ppm). In the microleakage test, significant difference was only observed for the adhesive system factor (p=0.000). Conclusions Under the tested experimental conditions and based on the obtained results, it may be concluded that the aqueous AgNO3 solutions: have neutral/alkaline pH and service life of up to 168 h; the level of ionic silver is proportional to the concentration of the solution; even at 5% concentration, the solutions were capable of

  13. Fluorescence of aqueous solutions of commercial humic products

    Science.gov (United States)

    Gosteva, O. Yu.; Izosimov, A. A.; Patsaeva, S. V.; Yuzhakov, V. I.; Yakimenko, O. S.

    2012-01-01

    We have studied the spectral luminescence characteristics of aqueous solutions of humic products obtained from different raw material sources, and their behavior as the excitation wavelength increases from 270 nm to 355 nm. We have identified differences in the spectral properties of industrial humic products from coalified materials, lignin-containing organic waste, and humic products from plant raw material (peat, sapropel, vermicompost). We have shown that humic products from plant raw material have spectral properties closer to those for humic substances in natural water or soil than humic products from coalified materials.

  14. Kinetics of gibbsite leaching in sodium hydroxide aqueous solution

    Directory of Open Access Journals (Sweden)

    Pavlović Ljubica J.

    2002-01-01

    Full Text Available In order to study the kinetics and mechanism of the reaction, laboratory leaching was carried out with industrially produced gibbsite γ-Al(OH3 in aqueous solutions containing an excess of sodium hydroxide. The results obtained reaction temperature, duration and base concentration varied. The basic kinetic parameters were determined from: the reaction rate constant k=8.72·107 exp (-74990/RT and the process activation energy in the range Ea=72.5-96.81 kJ/mol.

  15. Hydrate-based heavy metal separation from aqueous solution

    Science.gov (United States)

    Song, Yongchen; Dong, Hongsheng; Yang, Lei; Yang, Mingjun; Li, Yanghui; Ling, Zheng; Zhao, Jiafei

    2016-02-01

    A novel hydrate-based method is proposed for separating heavy metal ions from aqueous solution. We report the first batch of experiments and removal characteristics in this paper, the effectiveness and feasibility of which are verified by Raman spectroscopy analysis and cross-experiment. 88.01-90.82% of removal efficiencies for Cr3+, Cu2+, Ni2+, and Zn2+ were obtained. Further study showed that higher R141b-effluent volume ratio contributed to higher enrichment factor and yield of dissociated water, while lower R141b-effluent volume ratio resulted in higher removal efficiency. This study provides insights into low-energy, intensive treatment of wastewater.

  16. Ethylbenzene Removal by Carbon Nanotubes from Aqueous Solution

    OpenAIRE

    Bijan Bina; Hamidreza Pourzamani; Alimorad Rashidi; Mohammad Mehdi Amin

    2012-01-01

    The removal of ethylbenzene (E) from aqueous solution by multiwalled, single-walled, and hybrid carbon nanotubes (MWCNTs, SWCNTs, and HCNTs) was evaluated for a nanomaterial dose of 1 g/L, concentration of 10–100 mg/L, and pH 7. The equilibrium amount removed by SWCNTs (E: 9.98 mg/g) was higher than by MWCNTs and HCNTs. Ethylbenzene has a higher adsorption tendency on CNTs, so that more than 98% of it adsorbed in first 14 min, which is related to the low water solubility and the high molecula...

  17. ADSORPTION OF METHYLENE BLUE FROM AQUEOUS SOLUTION ON ATTAPULGITE

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Batch adsorption experiments were carried out for the removal of methylene blue (MB) from aqueous solution using attapulgite as adsorbent. The effects of various parameters such as temperature, contact time, the pH value, and attapulgite dosage on the adsorption performance were investigated. The standard curve and regression equation were established by spectrophotometry. The adsorption experimental results showed that the adsorption equilibrium data were well in accord with Langmuir adsorptive model. The optimal result was acquired under the experimental condition of attapulgite dosage 0.18g, MB concentration 50.0mg/L, pH 10, and adsorption time 20min at room temperature.

  18. Standard Electrode Potentials Involving Radicals in Aqueous Solution: Inorganic Radicals

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, David A.; Huie, Robert E.; Koppenol, Willem H.; Lymar, Sergei V.; Merenyi, Gabor; Neta, Pedatsur; Ruscic, Branko; Stanbury, David M.; Steenken, Steen; Wardman, Peter

    2015-12-01

    Recommendations are made for standard potentials involving select inorganic radicals in aqueous solution at 25 °C. These recommendations are based on a critical and thorough literature review and also by performing derivations from various literature reports. The recommended data are summarized in tables of standard potentials, Gibbs energies of formation, radical pKa’s, and hemicolligation equilibrium constants. In all cases, current best estimates of the uncertainties are provided. An extensive set of Data Sheets is appended that provide original literature references, summarize the experimental results, and describe the decisions and procedures leading to each of the recommendations

  19. Adsorption of Copper from Aqueous Solution Using Mango Seed Powder

    Directory of Open Access Journals (Sweden)

    Samiksha V. Ashtikar

    2014-04-01

    Full Text Available The objective of the study was the removal of copper metal ions from aqueous solution using mango seed powder as low cost adsorbent. The influences of contact time, adsorbent doses & temperature were studied in batch experiments at room temperature. The results showed that with increase in the contact time percent removal of copper increases. The adsorption was rapid during first 45 minutes & equilibrium was reached in 90 minutes. The results also showed that with increase in the adsorbent doses & temperature percent removal of copper increases. Thus mango seeds have the potential to be applied as alternative low-cost biosorbent in the remediation of heavy metal contamination in waste water.

  20. Thermodynamics of multisolute adsorption from dilute aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Jossens, L. (Univ. Calif. Berkeley); Fritz, W.; Myers, A.L.; Prausnitz, J.M.; Schluender, E.U.

    1978-01-01

    Equilibrium adsorption data were obtained at 20/sup 0/C on activated carbon for six ternary aqueous systems simulating organic chemical wastewaters (phenol/p-nitrophenol, p-chlorophenol/p-nitrophenol, p-nitrophenol/benzoic acid, p-chlorophenol/phenyl acetic acid, o-phenylphenol/p-nitrophenol, and 2,4-dichlorophenol/dodecyl benzol sulfonic acid). The three-parameter Toth adsorption isotherm represented well the component single-solute data adsorption. With the thermodynamic ideal-adsorbed-solution method, total adsorptions were calculated from single-solute data predicted by the Toth equation and compared with experimental data. Prediction for total adsorption was within approx. 2-10Vertical Bar3<; for adsorption of individual components, within approx. 3-20Vertical Bar3<. A new three-parameter adsorption isotherm was derived, which also represented well the single-solute data. For bi-solute systems where dissociation is negligible, calculated individual adsorptions agreed with experiment within 2Vertical Bar3<. Systematic deviations between calculation and observed results may be due to the acidities of the solutes.

  1. Removal of phenols from aqueous solutions by emulsion liquid membranes.

    Science.gov (United States)

    Reis, M Teresa A; Freitas, Ondina M F; Agarwal, Shiva; Ferreira, Licínio M; Ismael, M Rosinda C; Machado, Remígio; Carvalho, Jorge M R

    2011-09-15

    The present study deals with the extraction of phenols from aqueous solutions by using the emulsion liquid membranes technique. Besides phenol, two derivatives of phenol, i.e., tyrosol (2-(4-hydroxyphenyl)ethanol) and p-coumaric acid (4-hydroxycinnamic acid), which are typical components of the effluents produced in olive oil plants, were selected as the target solutes. The effect of the composition of the organic phase on the removal of solutes was examined. The influence of pH of feed phase on the extraction of tyrosol and p-coumaric was tested for the membrane with Cyanex 923 as an extractant. The use of 2% Cyanex 923 allowed obtaining a very high extraction of phenols (97-99%) in 5-6 min of contact time for either single solute solutions or for their mixtures. The removal efficiency of phenol and p-coumaric acid attained equivalent values by using the system with 2% isodecanol, but the removal rate of tyrosol was found greatly reduced. The extraction of tyrosol and p-coumaric acid from their binary mixture was also analysed for different operating conditions like the volume ratio of feed phase to stripping phase (sodium hydroxide), the temperature and the initial concentration of solute in the feed phase.

  2. Simultaneous Preconcentration and Desalting of Organic Solutes in Aqueous Solutions by Bubble Bursting.

    Science.gov (United States)

    Chingin, Konstantin; Cai, Yunfeng; Liang, Juchao; Chen, Huanwen

    2016-05-17

    Significant efforts are being made to develop more practical and versatile approaches for the preconcentration and purification of complex chemical samples. Inspired by the naturally occurring enrichment of organic compounds in sea aerosols, in this study we demonstrate the potential of induced bubble bursting as an approach for the preconcentration of organic solutes in various aqueous solutions. Apart from the preconcentration of organics, notable decrease in the concentration of metal salt components was discovered for the first time. On the basis of a series of model experiments, the phenomenon has been attributed to intermolecular competition at the surface interface of rising bubbles. Overall, our results indicate the high versatility and simplicity of the bubble bursting approach for the simultaneous preconcentration and desalting of organic solutes in aqueous solutions for mass spectrometry, chromatography, optical detection, and other fields of analysis.

  3. Radiolysis of berberine or palmatine in aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Marszalek, Milena [Institute of Applied Radiation Chemistry, Technical University of Lodz, Wroblewskiego 15, 93-590 Lodz (Poland); Wolszczak, Marian, E-mail: marianwo@mitr.p.lodz.p [Institute of Applied Radiation Chemistry, Technical University of Lodz, Wroblewskiego 15, 93-590 Lodz (Poland)

    2011-01-15

    The reactions of hydrated electron (e{sub aq}{sup -}), hydrogen atom (H{sup {center_dot}}) (reducing species) and Cl{sub 2}{sup {center_dot}}{sup -},Br{sub 2}{sup {center_dot}}{sup -},{sup {center_dot}}N{sub 3},{sup {center_dot}}OH radicals (oxidizing species) with berberine or palmatine in aqueous solution have been studied by steady-state and pulse radiolysis. The spectra of transient intermediates, leading to the final products, are presented. The rate constants of the reaction of e{sub aq}{sup -} and {sup {center_dot}}OH radical with both alkaloids in the homogenous solution and in the presence of DNA are reported. It is demonstrated that the primary products of the reaction of berberine and palmatine with e{sub aq}{sup -} and radicals generated during radiolysis are unstable and undergo further reactions.

  4. INTERACTION OF POLYVINYLPYRROLIDONE WITH METAL CHLORIDE AQUEOUS SOLUTIONS

    Institute of Scientific and Technical Information of China (English)

    Mohammad Saleem Khan; Khaista Gul; Najeeb Ur Rehman

    2004-01-01

    Interactions of polyvinylpyrrolidone (PVP) with metal chlorides (MgCl2, CaCl2, KC1 and BaC12) have been investigated by viscometric and spectrophotometric techniques in aqueous solutions. Intrinsic viscosity [η] of (PVP) has shown a discontinuity with varying concentration of metal chlorides. The decreasing order of effectiveness of cation is K1+>Ca2+> Mg2+> Ba2+ for poly(vinylpyrrolidone) solution. Changes in the absorption spectra of the cosolutes were observed in the presence of PVP in the lower limit of the UV-visible region i.e. 200-210 nm. These changes were attributed to interaction of PVP molecules with the cosolute molecules. As the concentration of the cosolute increased, a red shift in the peaks was observed, indicating an increase in interaction between PVP and cosolutes.

  5. Removal of phosphate from aqueous solution with blast furnace slag.

    Science.gov (United States)

    Oguz, Ensar

    2004-10-18

    Blast furnace slag was used to remove phosphate from aqueous solutions. The influence of pH, temperature, agitation rate, and blast furnace slag dosage on phosphate removal was investigated by conducting a series of batch adsorption experiments. In addition, the yield and mechanisms of phosphate removal were explained on the basis of the results of X-ray spectroscopy, measurements of zeta potential of particles, specific surface area, and images of scanning electron microscopy (SEM) of the particles before and after adsorption. The specific surface area of the blast furnace slag was 0.4m(2)g(-1). The removal of phosphate predominantly has taken place by a precipitation mechanism and weak physical interactions between the surface of adsorbent and the metallic salts of phosphate. In this study, phosphate removal in excess of 99% was obtained, and it was concluded that blast furnace slag is an efficient adsorbent for the removal of phosphate from solution.

  6. Adsorption of thorium from aqueous solutions by perlite.

    Science.gov (United States)

    Talip, Z; Eral, M; Hiçsönmez, U

    2009-02-01

    The use of expanded perlite for the adsorption of thorium from aqueous solution by batch technique is presented. The effects of particle size, pH of the solution, initial thorium concentration, shaking time, V/m ratio and temperature were determined. It was found that the adsorption capacity increases by the increase in the pH of the suspensions. The rate of thorium adsorption on expanded perlite was observed to be fast in the first hour of the reaction time. Adsorption isotherms were expressed by Langmuir and Freundlich adsorption models and the adsorption experiments conducted at 30 +/- 1 degrees C showed that the adsorption isotherms correlated well with the Langmuir model. From the adsorption data, thermodynamic parameters such as DeltaG(o), DeltaH(o) and DeltaS(o) were calculated as a function of temperature.

  7. Photoelectron Spectra of Aqueous Solutions from First Principles

    Energy Technology Data Exchange (ETDEWEB)

    Gaiduk, Alex P.; Govoni, Marco; Seidel, Robert; Skone, Jonathan H.; Winter, Bernd; Galli, Giulia

    2016-06-08

    We present a combined computational and experimental study of the photoelectron spectrum of a simple aqueous solution of NaCl. Measurements were conducted on microjets, and first-principles calculations were performed using hybrid functionals and many-body perturbation theory at the G0W0 level, starting with wave functions computed in ab initio molecular dynamics simulations. We show excellent agreement between theory and experiments for the positions of both the solute and solvent excitation energies on an absolute energy scale and for peak intensities. The best comparison was obtained using wave functions obtained with dielectric-dependent self-consistent and range-separated hybrid functionals. Our computational protocol opens the way to accurate, predictive calculations of the electronic properties of electrolytes, of interest to a variety of energy problems.

  8. The crystal growth of barium flouride in aqueous solution

    Science.gov (United States)

    Barone, J. P.; Svrjcek, D.; Nancollas, G. H.

    1983-06-01

    The kinetics of growth of barium flouride seed crystals were investigated in aqueous solution at 25°C using a constant composition method, in which the supersaturation and ionic strength were maintained constant by the addition of titrants consisting of barium nitrate and potassium flouride solutions. The rates of reaction, studied over a range of supersaturation (σ ≈ 0.4 to 1.0), were interpreted in terms of crystal growth models. A spiral growth mechanism best describes the data, and scanning electron microscopy indicates a three-dimensional growth. In the presence of inorganic additives such as phosphate, however, induction periods precede a morphological two-dimensional crystallization. Coulter Counter results show little crystal agglomeration.

  9. Removal of methylene blue from aqueous solution by graphene oxide.

    Science.gov (United States)

    Yang, Sheng-Tao; Chen, Sheng; Chang, Yanli; Cao, Aoneng; Liu, Yuanfang; Wang, Haifang

    2011-07-01

    Graphene oxide (GO) is a highly effective absorbent of methylene blue (MB) and can be used to remove MB from aqueous solution. A huge absorption capacity of 714 mg/g is observed. At initial MB concentrations lower than 250 mg/L, the removal efficiency is higher than 99% and the solution can be decolorized to nearly colorless. The removal process is fast and more efficient at lower temperatures and higher pH values. The increase of ionic strength and the presence of dissolved organic matter would further enhance the removal process when MB concentration is high. The results indicate that GO can be applied in treating industrial effluent and contaminated natural water. The implications to graphene-based environmental technologies are discussed.

  10. Radiolysis of pentachlorophenol (PCP) in aqueous solution by gamma radiation

    Institute of Scientific and Technical Information of China (English)

    XUE Jun; WANG Jianlong

    2008-01-01

    Steady-state radiolysis experiments were performed to investigate the y-irradiation treatment of pentachlorophenol (PCP) in aqueoussolution. The effect of initial concentration on the PCP degradation was also investigated. The experimental results showed that γ-irradiation was able to degrade PCP in aqueous solution successfully, and the radiolytical degradation process of PCP could be describedby the first-order kinetic model. When the initial concentration of PCP was 25 and 50 mg/L and the radiation dose was 4 and 6 kGy,respectively, the degradation efficiency was 100%. A luminescence bacterial test was used for evaluating the toxicity of the radiolyticintermediate products. Total detoxification of a 75 mg/L PCP solution could be achieved by carrying out the irradiation procedure at the dose of 15 kGy.

  11. Rheological properties of aqueous solutions of biopolymeric hyaluronan

    Science.gov (United States)

    Szwajczak, Elzbieta

    2004-09-01

    Aqueous solutions of hyaluronic acid (hyaluronan, HA) were studied. The HA compound is a natural polysaccharide, bipolymer. It plays an important role in numerous biological processes as a component of the extracellular matrix, connective tissues and, especially, human and animal synovial joints. Natural and artificial solutions of the HA have demonstrated the viscoelastic nature. These properties are shown to be related to the microstructure parameters (bulk concentration, molecular weight) and external parameters (temperature, stress, shear rate). We emphasize the role of the flow properties of polymeric systems. It is found a liquid crystalline "order" can be "induced" during the material flow. The dynamic properties, such as the elastic shear modulus and viscous shear modulus, are given. These results are discussed in relation to the postulated function of hyaluronic acid in synovial joint and with respect to possibilities o their application in medicine and pharmacology.

  12. Influence of coal properties on mercury uptake from aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Lakatos, J.; Brown, S.D.; Snape, C.E. [Miskolc University, Miskolc-Egyetemvaros (Hungary). Research Inst. of Applied Chemistry

    1999-10-01

    The uptake of mercury (II) from aqueous solution by a range of coals has been studied and the results have been compared to those for a number of other sorbents, including commercial active carbons and cation-exchange resins. At pH 5 in a buffer medium, the capacities for mercury removal of the low-rank coals and the oxidized bituminous coals investigated are comparable to those of the other sorbents tested. For the lignites investigated, a high content of organic sulfur does not markedly affect the capacity for mercury uptake in relatively neutral and low chloride media, owing to redox reactions being the most likely mechanism involved. However, in highly acidic solutions, the capacities for mercury uptake are considerably greater for the high-sulfur coals investigated than for their low-sulfur counterparts due to chelation being the major sorption process involved. 36 refs., 4 figs., 7 tabs.

  13. Aqueous Solution Thermal Conductivity of Beryllium-Subgroup Metal Chlorides

    Directory of Open Access Journals (Sweden)

    K. Abdullayev

    2013-01-01

    Full Text Available The paper presents experimental data on thermal conductivity of BeCl2 and SrCl2 salt aqueous solutions in the temperature range from 20 to 300 °С  and at various electrolyte concentrations  in mass percent. For the first time thermal conductivity of the system Н2О + BeCl2 has been investigated at high temperatures.The experimental results are described with the help of an empirical equation in the form of: λs = λo (1+ Am + Bm3/2 + Cm2,where λs  and λo – thermal conductivity coefficients of solution and water; A, B and C – coefficients depending on electrolyte nature; m – molality in units mol/kg.The formula error is less than  ±1 %.

  14. Modeling of sodium acetate recovery from aqueous solutions by electrodialysis.

    Science.gov (United States)

    Fidaleo, Marcello; Moresi, Mauro

    2005-09-05

    The main engineering parameters (i.e., ion transport numbers in solution and electro-membranes; effective solute and water transport numbers; effective membrane surface area, membrane surface resistances, and limiting current intensity) affecting the recovery of sodium acetate from model solutions by electrodialysis (ED) were determined in accordance with a sequential experimental procedure. Such parameters allowed a satisfactory simulation of a few validation tests carried out under constant or step-wisely variable current intensity. The performance of this ED process was characterized in terms of a current efficiency (omega) of about 93% in the constant-current region, a water transport number (t(W)) of about 15, and a specific energy consumption (epsilon) increasing from 0.14 to 0.31 kWh/kg for a solute recovery yield of 95% as the current density (j) was increased from 112 to 337 A/m2. The specific resistance of the anion- or cation-exchange membranes were found to be three or two times greater than those measured in aqueous NaCl solutions and are to be used to design and/or optimize ED stacks involved in the downstream processing of acetic acid fermentation broths.

  15. QENS study on thermal gelation in aqueous solution of methylcellulose

    Energy Technology Data Exchange (ETDEWEB)

    Onoda-Yamamuro, N. [Department of Natural Sciences, College of Science and Engineering, Tokyo Denki University, Hiki-gun, Saitama 350-0394 (Japan)]. E-mail: yamamuro@u.dendai.ac.jp; Yamamuro, O. [Neutron Science Laboratory, Institute for Solid State Physics, University of Tokyo, 106-1 Shirakata, Tokai, Ibaraki 319-1106 (Japan); Inamura, Y. [Neutron Science Laboratory, Institute for Solid State Physics, University of Tokyo, 106-1 Shirakata, Tokai, Ibaraki 319-1106 (Japan); Nomura, H. [Department of Natural Sciences, College of Science and Engineering, Tokyo Denki University, Hiki-gun, Saitama 350-0394 (Japan)

    2007-04-30

    Dynamics of water and methylcellulose (MC) molecules in MC aqueous solution has been studied by means of quasi-elastic neutron-scattering (QENS) measurements. The dynamic structure factor S(Q,E) of the MC aqueous solution was fitted well to the sum of Lorentzian and delta functions. The former is attributed to diffusive motion of water molecules and the latter to local vibrational motion of MC molecules. The self-diffusion coefficient of water molecules was obtained from the Q dependence of the half-width at half-maximum (HWHM) of the Lorentzian function, while the mean-square displacement of MC molecules from the Q dependence of the intensity of the delta term. Both the diffusion coefficient and the mean-square displacement gradually increased on heating and abruptly decreased around the thermal gelation temperature (around 320 K). The present results revealed that the microscopic motions of both water and MC molecules give rise to dynamic slowing down on thermal gelation.

  16. Radiation crosslinking of methylcellulose and hydroxyethylcellulose in concentrated aqueous solutions

    Science.gov (United States)

    Wach, Radoslaw A.; Mitomo, Hiroshi; Nagasawa, Naotsugu; Yoshii, Fumio

    2003-12-01

    The effects of ionizing radiation on aqueous solutions of cellulose ethers, methylcellulose (MC) and hydroxyethylcellulose (HEC) were investigated. The well-established knowledge states that cellulose and its derivatives belong to degrading type of polymers. However, in our study intermolecular crosslinking initiated by gamma rays or electron beam leaded to the formation of insoluble gel. This is an opposite effect of irradiation to the degradation. Paste-like form of the initial specimen, i.e. concentration 20-30%, when water plasticizes the bulk of polymer; and a high dose rate were favorable for hydrogel formation. Gel fraction up to 60% and 70% was obtained from solutions of HEC and MC, respectively. Produced hydrogels swell markedly in aqueous media by imbibing and holding the solvent. Radiation parameters of irradiation, such as yields of degradation and crosslinking and the gelation dose, were evaluated by sol-gel analysis on the basis of Charlesby-Rosiak equation. Despite of the crosslinked structure, obtained hydrogels can be included into the group of biodegradable materials. They undergo decomposition by the action of cellulase enzyme or microorganisms from compost.

  17. Removal of heavy metals from aqueous solution by sawdust adsorption

    Institute of Scientific and Technical Information of China (English)

    BULUT Yasemin; TEZ Zeki

    2007-01-01

    The adsorption of lead, cadmium and nicel from aqueous solution by sawdust of walnut was investigated. The effect of contact time,initial metal ion concentration and temperature on metal ions removal has been studied. The equilibrium time was found to be of the order of 60 min. Kinetics fit pseudo first-order, second-order and intraparticle diffusion models, hence adsorption rate constants were calculated. The adsorption data of metal ions at temperatures of 25, 45 and 60C have been described by the Freundlich and Langmuir isotherm models. The thermodynamic parameters such as energy, entropy and enthalpy changes for the adsorption of heavy metal ions have also been computed and discussed. Ion exchange is probably one of the major adsorption mechanisms for binding divalent metal ions to the walnut sawdust. The selectivity order of the adsorbent is Pb(Ⅱ)≈Cd(Ⅱ)>Ni(Ⅱ). From these results, it can be concluded that the sawdust of walnut could be a good adsorbent for the metal ions from aqueous solutions.

  18. New terahertz dielectric spectroscopy for the study of aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    George, Deepu K.; Charkhesht, Ali; Vinh, N. Q., E-mail: Vinh@vt.edu [Department of Physics, Virginia Tech, Blacksburg, Virginia 24061 (United States)

    2015-12-15

    We present the development of a high precision, tunable far-infrared (terahertz) frequency-domain dielectric spectrometer for studying the dynamics of biomolecules in aqueous solutions in the gigahertz-to-terahertz frequency. As an important benchmark system, we report on the measurements of the absorption and refractive index for liquid water in the frequency range from 5 GHz to 1.12 THz (0.17–37.36 cm{sup −1} or 0.268–60 mm). The system provides a coherent radiation source with power up to 20 mW in the gigahertz-to-terahertz region. The dynamic range of our instrument reaches 10{sup 12} and the system achieves a spectral resolution of less than 100 Hz. The temperature of samples can be controlled precisely with error bars of ±0.02 °C from 0 °C to 90 °C. Given these attributes, our spectrometer provides unique capabilities for the accurate measurement of even very strongly absorbing materials such as aqueous solutions.

  19. Methanol Uptake By Low Temperature Aqueous Sulfuric Acid Solutions

    Science.gov (United States)

    Iraci, Laura T.; Essin, Andrew M.; Golden, David M.; Hipskind, R. Stephen (Technical Monitor)

    2001-01-01

    To evaluate the role of upper tropospheric and lower stratospheric aerosols in the global budget of methanol, the solubility and reactivity of CH3OH in aqueous sulfuric acid solutions are under investigation. Using standard uptake techniques in a Knudsen cell reactor, we have measured the effective Henry's law coefficient, H(*), for methanol dissolution into 45 to 70 percent by weight H2SO4. We find that methanol solubility ranges from 10(exp 5) to 10(exp 8) M/atm and increases with decreasing temperature and with increasing sulfuric acid content. These solubility measurements include uptake due to physical solvation and all rapid equilibria which are established in solution. Our data indicate that simple uptake by aqueous sulfuric acid particles will not be a significant sink for methanol in the UT/LS. These results differ from those recently reported in the literature, and an explanation of this disparity will be presented. In addition to solvation, reaction between primary alcohols and sulfuric acid does occur, leading to the production of alkyl sulfates. Literature values for the rate of this reaction suggest that formation of CH3OSO3H may proceed in the atmosphere but is not significant under our experimental conditions. Results obtained using a complementary equilibrium measurement technique confirm this directly. In addition, the extent of methanol sequestration via formation of mono- and dimethylsulfate will be evaluated under several atmospheric conditions.

  20. Gamma radiolytic degradation of naphthalene in aqueous solution

    Science.gov (United States)

    Chu, Libing; Yu, Shaoqing; Wang, Jianlong

    2016-06-01

    The decomposition of naphthalene in aqueous solution was studied using gamma irradiation combined with both H2O2 and TiO2 nanoparticles. Gamma irradiation led to a complete degradation of naphthalene and a partial mineralization. With initial concentration of 5-32 mg/L, more than 98% of naphthalene was removed and TOC reduction reached 28-31% at an absorbed dose of 3.0 kGy. The degradation of naphthalene was faster at neutral pH and the initial degradation rate increased with increasing the initial concentration of naphthalene. Addition of H2O2 and TiO2 nanoparticles all enhanced the degradation and mineralization of naphthalene. TOC removal efficiency increased from 28% (irradiation alone) to 35% with addition of H2O2 (40 mg/L), and to 48% with addition of TiO2 (0.8 g/L). The degradation of naphthalene in aqueous solution by gamma irradiation was mainly through the oxidation by ·OH radicals. The intermediate naphthol and carboxylic acids such as formic acid and oxalic acid were identified by LC-MS and IC.

  1. Pulse-Radiolysis of Aqueous KBrO4 Solutions

    DEFF Research Database (Denmark)

    Olsen, K. J.; Sehested, Knud; Appelman, L.H.

    1973-01-01

    Pulse-radiolysis of aqueous KBrO4 solutions show that BrO−4 reacts with e−aq by the reaction BrO−4 + e−aq → BrO−3 + O−. keaq + BrO−4 = (7.0 ± 0.7) × 109 M−1 sec−1. The reactions between BrO−4 and H, OH and O− are slow. The rate constants for these reactions are less than 107 M−1 sec−1.......Pulse-radiolysis of aqueous KBrO4 solutions show that BrO−4 reacts with e−aq by the reaction BrO−4 + e−aq → BrO−3 + O−. keaq + BrO−4 = (7.0 ± 0.7) × 109 M−1 sec−1. The reactions between BrO−4 and H, OH and O− are slow. The rate constants for these reactions are less than 107 M−1 sec−1....

  2. New terahertz dielectric spectroscopy for the study aqueous solutions

    CERN Document Server

    George, Deepu K; Vinh, N Q

    2015-01-01

    We present a development of a high precision, tunable far-infrared (terahertz) frequency-domain dielectric spectrometer for studying the dynamics of biomolecules in aqueous solutions in the gigahertz-to-terahertz frequency. As a first application we report on the measurement of the absorption and refractive index for liquid water in the frequency range from 5 GHz to 1.12 THz (0.17 to 37.36 cm-1 or 0.268 to 60 mm). The system provides a coherent radiation source with a power up to 20 mW in the gigahertz-to-terahertz region. The power signal-to-noise ratio of our instrument reaches 1015 and the system achieves a spectral resolution of less than 100 Hz. The temperature of samples can be controlled precisely with an error bars of 0.02 oC from above 0 oC to 90 oC. Given these attributes, our spectrometer provides unique capabilities for the accurate measurement of even very strongly absorbing materials such as aqueous solutions.

  3. Examination of rheological properties of aqueous solutions of sodium caseinate

    Directory of Open Access Journals (Sweden)

    Jolanta Gawałek

    2012-12-01

    Full Text Available Application of sodium caseinate as a functional additive in manufacturing processes requires production of its concentrated aqueous solutions which, in industrial conditions, presents a number of difficulties. In order to develop an effective and optimal industrial process of mixing – manufacturing a concentrated solution of sodium caseinate, it is essential to know rheological properties in a definite range of concentrations changing in the course of the dissolving process. The material for investigations was typical commercial sodium caseinate in the form of dry powder manufactured in Poland from acid casein using the method of extrusion. The objective of the undertaken empirical studies was the assessment of the impact of the concentration on rheological properties of sodium caseinate concentrates. Investigations were carried out for five concentrates manufactured in a mixer equipped in a mechanical agitator at concentrations ranging X (% Î (2.5¸12.5 and changing mass proportions of sodium caseinate in the aqueous solution as follows: GS/G (kgS·kg-1 = 0.025. On the basis of the obtained research results, classical flow curves were plotted for individual concentrates. The determined values of viscosity and density of the examined solutions were correlated in the form of h = f(GS/G and r = f(GS/G dependencies which were used during the determination of classical characteristics of mixing forces essential for the assessment of energetic expenditures required to manufacture concentrates in a mixer equipped in a mechanical agitator. The density of the examined concentrates increased in a way directly proportional, while the dynamic viscosity coefficient increased exponentially together with the increase of sodium caseinate concentration. Sodium caseinate concentrates exhibited Newtonian character in the examined range of concentrations.

  4. Removal of low molecular organic acids from aqueous solutions with reactive extraction

    National Research Council Canada - National Science Library

    Dominika Szternel; Magdalena Regel-Rosocka; Maciej Wiśniewski

    2013-01-01

    ...) from aqueous solutions with reactive extraction. The results specifically show that the extraction efficiency of acids depends on the type of extractant, diluents of the organic phase and the initial pH of the aqueous phase...

  5. Population and size distribution of solute-rich mesospecies within mesostructured aqueous amino acid solutions.

    Science.gov (United States)

    Jawor-Baczynska, Anna; Moore, Barry D; Lee, Han Seung; McCormick, Alon V; Sefcik, Jan

    2013-01-01

    Aqueous solutions of highly soluble substances such as small amino acids are usually assumed to be essentially homogenous systems with some degree of short range local structuring due to specific interactions on the sub-nanometre scale (e.g. molecular clusters, hydration shells), usually not exceeding several solute molecules. However, recent theoretical and experimental studies have indicated the presence of much larger supramolecular assemblies or mesospecies in solutions of small organic and inorganic molecules as well as proteins. We investigated both supersaturated and undersaturated aqueous solutions of two simple amino acids (glycine and DL-alanine) using Dynamic Light Scattering (DLS), Brownian Microscopy/Nanoparticles Tracking Analysis (NTA) and Cryogenic Transmission Electron Microscopy (Cryo-TEM). Colloidal scale mesospecies (nanodroplets) were previously reported in supersaturated solutions of these amino acids and were implicated as intermediate species on non-classical crystallization pathways. Surprisingly, we have found that the mesospecies are also present in significant numbers in undersaturated solutions even when the solute concentration is well below the solid-liquid equilibrium concentration (saturation limit). Thus, mesopecies can be observed with mean diameters ranging from 100 to 300 nm and a size distribution that broadens towards larger size with increasing solute concentration. We note that the mesospecies are not a separate phase and the system is better described as a thermodynamically stable mesostructured liquid containing solute-rich domains dispersed within bulk solute solution. At a given temperature, solute molecules in such a mesostructured liquid phase are subject to equilibrium distribution between solute-rich mesospecies and the surrounding bulk solution.

  6. Relationship between solution structure and phase behavior: a neutron scattering study of concentrated aqueous hexamethylenetetramine solutions.

    Science.gov (United States)

    Burton, R C; Ferrari, E S; Davey, R J; Finney, J L; Bowron, D T

    2009-04-30

    The water-hexamethylenetetramine system displays features of significant interest in the context of phase equilibria in molecular materials. First, it is possible to crystallize two solid phases depending on temperature, both hexahydrate and anhydrous forms. Second, saturated aqueous solutions in equilibrium with these forms exhibit a negative dependence of solubility (retrograde) on temperature. In this contribution, neutron scattering experiments (with isotopic substitution) of concentrated aqueous hexamethylenetetramine solutions combined with empirical potential structure refinement (EPSR) were used to investigate the time-averaged atomistic details of this system. Through the derivation of radial distribution functions, quantitative details emerge of the solution coordination, its relationship to the nature of the solid phases, and of the underlying cause of the solubility behavior of this molecule.

  7. Adsorption of cesium on cement mortar from aqueous solutions.

    Science.gov (United States)

    Volchek, Konstantin; Miah, Muhammed Yusuf; Kuang, Wenxing; DeMaleki, Zack; Tezel, F Handan

    2011-10-30

    The adsorption of cesium on cement mortar from aqueous solutions was studied in series of bench-scale tests. The effects of cesium concentration, temperature and contact time on process kinetics and equilibrium were evaluated. Experiments were carried out in a range of initial cesium concentrations from 0.0103 to 10.88 mg L(-1) and temperatures from 278 to 313 K using coupons of cement mortar immersed in the solutions. Non-radioactive cesium chloride was used as a surrogate of the radioactive (137)Cs. Solution samples were taken after set periods of time and analyzed by inductively coupled plasma mass spectroscopy. Depending on the initial cesium concentration, its equilibrium concentration in solution ranged from 0.0069 to 8.837 mg L(-1) while the respective surface concentration on coupons varied from 0.0395 to 22.34 μg cm(-2). Equilibrium test results correlated well with the Freundlich isotherm model for the entire test duration. Test results revealed that an increase in temperature resulted in an increase in adsorption rate and a decrease in equilibrium cesium surface concentration. Among several kinetic models considered, the pseudo-second order reaction model was found to be the best to describe the kinetic test results in the studied range of concentrations. The adsorption activation energy determined from Arrhenius equation was found to be approximately 55.9 kJ mol(-1) suggesting that chemisorption was the prevalent mechanism of interaction between cesium ions and cement mortar.

  8. Electrical conductivity of aqueous solutions of aluminum salts

    Science.gov (United States)

    Vila, J.; Rilo, E.; Segade, L.; Cabeza, O.; Varela, L. M.

    2005-03-01

    We present experimental measurements of the specific electrical conductivity (σ) in aqueous solutions of aluminum salts at different temperatures, covering all salt concentrations from saturation to infinite dilution. The salts employed were AlCl3 , AlBr3 , AlI3 , and Al(NO3)3 , which present a 1:3 relationship between the electrical charges of anion and cation. In addition, we have measured the density in all ranges of concentrations of the four aqueous electrolyte solutions at 298.15K . The measured densities show an almost linear behavior with concentration, and we have fitted it to a second order polynomial with very high degree of approximation. The measurement of the specific conductivity at constant temperature reveals the existence of maxima in the conductivity vs concentration curves at molar concentrations around 1.5M for the three halide solutions studied, and at approximately 2M for the nitrate. We present a theoretical foundation for the existence of these maxima, based on the classical Debye-Hückel-Onsager hydrodynamic mean-field framework for electrical transport and its high concentration extensions, and also a brief consideration of ionic frictional coefficients using mode-coupling theory. We also found that the calculated values of the equivalent conductance vary in an approximately linear way with the square root of the concentration at concentrations as high as those where the maximum of σ appears. Finally, and for completeness, we have measured the temperature dependence of the electrical conductivity at selected concentrations from 283to353K , and performed a fit to an exponential equation of the Vogel-Fulcher-Tamman type. The values of the calculated temperatures of null mobility of the four salts are reported.

  9. An experimental study of the solubility and speciation of tantalum in fluoride-bearing aqueous solutions at elevated temperature

    Science.gov (United States)

    Timofeev, A.; Migdisov, Art. A.; Williams-Jones, A. E.

    2017-01-01

    The solubility of Ta2O5 (solid) and the speciation of tantalum in HF-bearing aqueous solutions have been determined at temperatures of 100-250 °C and vapour-saturated water pressure. Tantalum is transported as the species Ta(OH)50 at low HF concentration and pH ∼1-3. At higher HF concentration, tantalum mobility is controlled by the species TaF3(OH)3- and TaF50; the presence of TaF50 is only evident at ⩽150 °C. Equilibrium constants range from -17.4 ± 0.45 to -16.4 ± 0.12 for the formation of Ta(OH)50 from crystalline Ta2O5 and from -8.24 ± 0.64 to -8.55 ± 0.68 for the formation of TaF3(OH)3- at 100 and 250 °C, respectively. For TaF50, they were determined to be 0.13 at 100 °C and -0.35 at 150 °C. In many respects, the behaviour of tantalum in acidic fluoride-bearing solutions is similar to that of niobium. The solubility of Ta2O5 (solid) is not dependent on HF concentration in fluoride-poor fluids, but rises rapidly at higher HF concentration. However, at the conditions of our experiments, namely a pH of ∼2, temperature up to 250 °C, and a wide range of HF concentrations, Ta2O5 (solid) solubility is almost invariably lower than that of Nb2O5 (solid). Modelling of Nb and Ta leaching confirmed the preferential mobility of niobium under most conditions expected in natural fluoride-rich hydrothermal systems. This modelling also demonstrated that both niobium and tantalum are rapidly deposited upon removal of fluoride from an acidic brine. As a result of hydrothermal alteration, the Nb/Ta ratios of secondary minerals may increase relative to those of the primary mineral, or remain largely unaffected, depending on the pH of the fluid.

  10. Molecular dynamics simulation of biomembranes in aqueous solution

    Science.gov (United States)

    Bostick, David Lee

    In recent years, the developments in classical molecular dynamics simulation have allowed for an atomistic depiction of mesoscopic biological systems. With the awareness of such developments, the natural strive of the scientific community has been to increase the size of such simulated systems [70]. Nonetheless, the subtleties in the properties of biomembranes require an unusually thoughtful approach [70, 203]. In this work, a hierarchical approach is taken, with respect to system complexity, in the classical molecular dynamics simulation of biomembrane systems in aqueous solution. A progression of simulation studies is presented that begins with the analysis of the interfacial properties of neat bilayers composed of zwitterionic (phosphatidylcholine) lipids in both pure water and in electrolyte. We move on to study mixed bilayers containing zwitterionic (phosphatidylcholine) and acidic (phosphatidylserine) lipids with counterions immersed in electrolyte. Yet another layer of complexity is added to the problem by studying hydrated bilayers containing phosphatidylcholine lipids and cholesterol. Finally, we address the semipermeable nature of biomembranes by studying two membrane-channel systems. We start with a simple model membrane-channel consisting of a six-helix alamethicin bundle embedded in a hydrated phosphatidylcholine bilayer. The knowledge gained from this study is then carried over to the simulation of a large membrane-embedded prokaryotic ClC Cl-/H + antiporter, utilizing a free-energetic analysis to reveal the role of protons in the Cl- transport mechanism. Throughout the progression, methods are developed and used in the analysis of interfacial aqueous solution structure, ion-membrane binding, lipid structural properties, inter-lipid hydrogen bonded complexation, and electrostatics at the membrane interface. The developments reveal the layered nature of water near the rugged, molecularscale aqueous solution/membrane interface and its electrostatic

  11. Osmotic potential calculations of inorganic and organic aqueous solutions over wide solute concentration levels and temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Cochrane, T. T., E-mail: agteca@hotmail.com [AGTECA S.A., 230 Oceanbeach Road, Mount Maunganui, Tauranga 3116 (New Zealand); Cochrane, T. A., E-mail: tom.cochrane@canterbury.ac.nz [Department of Civil and Natural Resources Engineering, University of Canterbury, Private Bag 4800, Christchurch 8140 (New Zealand)

    2016-01-15

    Purpose: To demonstrate that the authors’ new “aqueous solution vs pure water” equation to calculate osmotic potential may be used to calculate the osmotic potentials of inorganic and organic aqueous solutions over wide ranges of solute concentrations and temperatures. Currently, the osmotic potentials of solutions used for medical purposes are calculated from equations based on the thermodynamics of the gas laws which are only accurate at low temperature and solute concentration levels. Some solutions used in medicine may need their osmotic potentials calculated more accurately to take into account solute concentrations and temperatures. Methods: The authors experimented with their new equation for calculating the osmotic potentials of inorganic and organic aqueous solutions up to and beyond body temperatures by adjusting three of its factors; (a) the volume property of pure water, (b) the number of “free” water molecules per unit volume of solution, “N{sub f},” and (c) the “t” factor expressing the cooperative structural relaxation time of pure water at given temperatures. Adequate information on the volume property of pure water at different temperatures is available in the literature. However, as little information on the relative densities of inorganic and organic solutions, respectively, at varying temperatures needed to calculate N{sub f} was available, provisional equations were formulated to approximate values. Those values together with tentative t values for different temperatures chosen from values calculated by different workers were substituted into the authors’ equation to demonstrate how osmotic potentials could be estimated over temperatures up to and beyond bodily temperatures. Results: The provisional equations formulated to calculate N{sub f}, the number of free water molecules per unit volume of inorganic and organic solute solutions, respectively, over wide concentration ranges compared well with the calculations of N{sub f

  12. Comparison of Photochemical Reactions of m-Cresol in Aqueous Solution and in Ice

    Institute of Scientific and Technical Information of China (English)

    PENG Fei; XUE Hong-hai; TANG Xiao-jian; KANG Chun-li; LI Lin-lin; LI Zhe

    2012-01-01

    We compared the photochemical reaction of m-cresol containing OH precursors such as H2O2,NO2- and NO3- in aqueous solution with those in ice.The results show that the conversion rate of m-cresol in aqueous solution was higher than that in ice,H2O2,NO2- and NO3- all accelerated the photoconversion of m-cresol in both aqueous solution and ice.The photochemical reactions of m-cresol obeys the first order kinetics equation.According to the photoproducts identified by GC-MS,we proposed that hydroxylation and nitration reactions occurred in both aqueous solution and ice.Coupling reaction was common in ice,however,in aqueous solution it was found only in UV system.Our results suggest that the photochemical reactions of m-cresol were different in aqueous solution and in ice.

  13. Colloidal Stability of Graphene Oxide Nanosheets in Aqueous Solutions

    Science.gov (United States)

    Guikema, Janice; Wang, Yung-Li; Chen, Kai

    2013-03-01

    Carbon-based nanomaterials are increasingly used in commercial products as well as in research and industrial applications. Due to its extraordinary properties, graphene has attracted intense research interest and has been demonstrated in many potential applications including solar cells, conductive ink, and transistors. Graphene oxide has also been studied extensively and has been used to produce biocompatible antibacterial paper. Chemical reduction of graphene oxide is commonly used to produce inexpensive graphene in large quantities. With the increasing use of graphene and graphene oxide in consumer products, these nanomaterials may inevitably be released to aqueous systems, resulting in potential risk to environmental ecosystems and human health. The fate and mobility of graphene and its oxides in aquatic systems is dependent on their colloidal stability. We will discuss our study of the early-stage aggregation kinetics of graphene oxide in aqueous solutions. We prepared a suspension of single-layer graphene oxide nanosheets in water and used time-resolved dynamic light scattering to study the influence of electrolytes and pH on the aggregation kinetics of the nanosheets. Atomic force microscopy was employed to further examine the graphene oxide nanosheets.

  14. Chemical metallization of KMPR photoresist polymer in aqueous solutions

    Science.gov (United States)

    Zeb, Gul; Duong, Xuan Truong; Vu, Ngoc Pi; Phan, Quang The; Nguyen, Duc Tuong; Ly, Viet Anh; Salimy, Siamak; Le, Xuan Tuan

    2017-06-01

    While conventional methods for preparing thin films of metals and metallic alloys on insulating substrates in the field of microelectromechanical systems (MEMS) include vapor deposition techniques, we demonstrate here that electroless deposition can be considered as an alternate efficient approach to metallize the surface of insulating substrates, such as KMPR epoxy photoresist polymer. In comparison with the physical and chemical vapor deposition methods, which are well-established for metallization of photoresist polymers, our electroless nickel plating requires only immersing the substrates into aqueous solutions in open air at low temperatures. Thin films of nickel alloy have been deposited electrolessly on KMPR surface, through a cost-effective and environmental chromium-free process, mediated through direct grafting of amine palladium complexes in aqueous medium. This covalent organic coating provides excellent adhesion between KMPR and the nickel film and allows better control of the palladium catalyst content. Covalent grafting and characterization of the deposited nickel film have been carried out by means of Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy techniques.

  15. Arsenic Removal from Aqueous Solutions by Salvadora persica Stem Ash

    Directory of Open Access Journals (Sweden)

    Ferdos Kord Mostafapour

    2013-01-01

    Full Text Available Arsenic is a naturally occurring metalloid, which is widely distributed in nature and is regarded as the largest mass poisoning in history. In the present study, the adsorption potential of Salvadora persica (S. persica stem ash in a batch system for the removal of As(V from aqueous solutions was investigated. Isotherm studies were carried out to evaluate the effect of contact time (20–240 min, pH (2–11, initial arsenic concentration (50–500 μg/L, and adsorbent dose on sorption efficiency. Maximum removal efficiency of 98.33% and 99.32% was obtained at pH 6, adsorbent dosage 3.5 g/L, initial As(V concentration 500 μg/L, and contact time 80 and 60 min for S. persica stem ash at 300 °C and 500 °C, respectively. Also, the adsorption equilibriums were analyzed by the Langmuir and Freundlich isotherm models. Such equilibriums showed that the adsorption data was well fitted with the Freundlich isotherm model for S. persica stem ash at both 300 °C and 500 °C (R2=0.8983 and 0.9274, resp.. According to achieved results, it was defined that S. persica stem ash can be used effectively for As(V removal from the aqueous environment.

  16. Study of the nanobubble phase of aqueous NaCl solutions by dynamic light scattering

    Energy Technology Data Exchange (ETDEWEB)

    Bunkin, N F; Shkirin, A V [A M Prokhorov General Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation); Burkhanov, I S; Chaikov, L L [P N Lebedev Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation); Lomkova, A K [N.E. Bauman Moscow State Technical University, Moscow (Russian Federation)

    2014-11-30

    Aqueous NaCl solutions with different concentrations have been investigated by dynamic scattering of laser radiation. It is experimentally shown that these solutions contain scattering particles with a wide size distribution in a range of ∼10 – 100 nm. The experimental results indirectly confirm the existence of quasi-stable gas nanobubbles in the bulk of aqueous ionic solutions. (light scattering)

  17. Carbon dioxide capture capacity of sodium hydroxide aqueous solution.

    Science.gov (United States)

    Yoo, Miran; Han, Sang-Jun; Wee, Jung-Ho

    2013-01-15

    The present paper investigates the various features of NaOH aqueous solution when applied as an absorbent to capture carbon dioxide (CO(2)) emitted with relatively high concentration in the flue gas. The overall CO(2) absorption reaction was carried out according to consecutive reaction steps that are generated in the order of Na(2)CO(3) and NaHCO(3). The reaction rate and capture efficiency were strongly dependent on the NaOH concentration in the Na(2)CO(3) production range, but were constant in the NaHCO(3) production step, irrespective of the NaOH concentration. The amount of CO(2) absorbed in the solution was slightly less than the theoretical value, which was ascribed to the low trona production during the reaction and the consequent decrease in CO(2) absorption in the NaOH solution. The mass ratio of absorbed CO(2) that participated in the Na(2)CO(3), NaHCO(3), and trona production reactions was calculated to be 20:17:1, respectively.

  18. Aqueous solution of basic fuchsin as food irradiation dosimeter

    Institute of Scientific and Technical Information of China (English)

    Hasan M. KHAN; Shagufta NAZ

    2007-01-01

    Dosimetric characterization of aqueous solution of basic fuchsin was studied spectrophotometrically for possible application in the low-dose food irradiation dosimetry. Absorption spectra of unirradiated and irradiated solutions were determined and the decrease in absorbance with the dose was noted down. Radiation-induced bleaching of the dye was measured at wavelengths of maximum absorption λmax (540nm) as well as 510nm and 460 nm. At all these wavelengths, the decrease in absorbance of the dosimeter was linear with respect to the absorbed dose from 50 Gy to 600 Gy. The stability of dosimetric solution during post-irradiation storage in the dark at room temperature showed that after initial bleaching during first ten to twenty days, the response was almost stable for about 34 days. The study on the effect of different light and temperature conditions also showed that the response gradually decreased during the storage period of 34 days, which shows that basic fuchsin dye is photosensitive as well as thermally sensitive.

  19. Ultrasonic Measurements of Temperature in Aqueous Solutions: Why and How

    Directory of Open Access Journals (Sweden)

    A. Afaneh

    2011-01-01

    Full Text Available The paper describes two different approaches to ultrasonic measurements of temperature in aqueous solutions. The first approach uses two narrowband ultrasonic transducers and support electronics that form an oscillating sensor which output frequency is related to the measured temperature. This low-cost sensor demonstrated sensitivity of about 40 Hz/K at the distance of 190 mm and the operating frequency of about 25 kHz. The second approach utilised pulse-echo mode at the centre frequency of 20 MHz. The reflector featured a cavity that was filled with deionised water. The ultrasound propagation delay in the cavity was related to the temperature in the solution. The experiments were conducted for deionised water, and solutions of sodium persulfate, sodium chloride, and acetic acid with concentrations up to 0.5 M. In the experiments (conducted within the temperature range from 15 to 30°C, we observed increases in the ultrasound velocity for increased temperatures and concentrations as was expected. Measurement results were compared with literature data for pure and seawater. It was concluded that ultrasonic measurements of temperature were conducted with the resolution well below 0.1 K for both methods. Advantages of ultrasonic temperature measurements over conventional thermometers were discussed.

  20. Hydrophobicity and thermodynamic response for aqueous solutions of amphiphiles

    Science.gov (United States)

    Zemánková, Katerina; Troncoso, Jacobo; Cerdeiriña, Claudio A.; Romaní, Luis; Anisimov, Mikhail A.

    2016-06-01

    The anomalous behavior of aqueous solutions of amphiphiles in the water-rich region is analyzed via a phenomenological approach that utilizes the isobaric heat capacity Cp as an experimental probe. We report extensive data for solutions of 14 amphiphiles as a function of temperature at atmospheric pressure. Beyond that, Cp data but also isobaric thermal expansivities and isothermal compressibilities for three solutions of tert-butanol as a function of both temperature and pressure are presented. Results rule out the possibility that the observed phenomenology is associated with the anomalous thermodynamics of pure water. Indeed, our Cp data, quantitatively consistent with recent spectroscopic analyses, suggest that water-mediated interactions between the nonpolar parts of amphiphiles are at the origin of anomalies, with the effects of such "hydrophobic aggregation" being observed at mole fractions as small as 0.01. Physicochemical details like the size, the electronic charge distribution and the geometry of amphiphile molecules as well as third-order derivatives of the Gibbs energy and the associated Koga lines support the above claims while they further contribute to characterizing the role of hydrophobicity in these phenomena. Progress with a view to gain a deeper, more concrete understanding remains.

  1. Formation of wormlike micelles in anionic surfactant AES aqueous solutions

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The growth and structure of anionic micelles of sodium dodecyl trioxyethylene sulfate (AES) in the presence 3+of multivalent counterion Al were investigated by means of dynamic rheological methods. It has been obtained by the measurements of shear viscosity, complex viscosity and dynamic moduli, as well as the application of Cox-Merz rule and Cole-Cole plot that wormlike micelle and network structure could be formed in AES/AlCl3 aqueous solutions.The structure was of a character of nonlinear viscoelastic fluid and departure from the simple Maxwell model. The technique of freeze-fracture transmission electron microscopy (FF-TEM) was also used to confirm the formation of this interesting structure.``

  2. Aqueous dispersions of silver nanoparticles in polyelectrolyte solutions

    Indian Academy of Sciences (India)

    Dan Donescu; Raluca Somoghi; Marius Ghiurea; Raluca Ianchis; Cristian Petcu; Stefania Gavriliu; Magdalena Lungu; Claudia Groza; Carmen R Ionescu; Carmen Panzaru

    2013-03-01

    In this report, we present the versatile and effective technique, using environmental friendly reductant glucose, to prepare stable silver nanodispersions by reduction of Ag+ ions. Alternant copolymers of maleic anhydride with vinyl acetate and styrene sulphonate sodium acid salt polyelectrolytes were synthesized in aqueous solution and used as stabilizers. The formation of nano silver particles was confirmed by UV-Vis spectrophotometry and TEM measurements. Dynamic Light Scattering (DLS) measurements were needed to study how the reagents and their concentrations influence particle size. SEM images show the nanostructure of the hybrid films and indicate a strong interaction between the polyelectrolyte and the silver NPs. Moreover, the silver NPs could be stored for one year without observation of aggregates or sedimentation. The final solid products obtained after evaporating to dryness can be used to produce stable dispersions upon mixing with water. Few of the final products were found to exhibit a high antibacterial and antifungal activity.

  3. γ-Irradiation of malic acid in aqueous solutions

    Science.gov (United States)

    Negron-Mendoza, Alicia; Graff, Rebecca L.; Ponnamperuma, Cyril

    1980-12-01

    The γ-irradiation of malic acid in aqueous solutions was studied under initially oxygenated and oxygen-free conditions in an attempt to determine the possible interconversion of malic acid into other carboxylic acids, specifically those associated with Krebs cycle. The effect of dose on product formation of the system was investigated. Gas-liquid chromatography combined with mass spectrometry was used as the principal means of identification of the non-volatile products. Thin layer chromotography and direct probe mass spectroscopy were also employed. The findings show that a variety of carboxylic acids are formed, with malonic and succinic acids in greatest abundance. These products have all been identified as being formed in the γ-irradiation of acetic acid, suggesting a common intermediary. Since these molecules fit into a metabolic cycle, it is strongly suggestive that prebiotic pathways provided the basis for biological systems.

  4. Adsorption of CTAB onto perlite samples from aqueous solutions.

    Science.gov (United States)

    Alkan, Mahir; Karadaş, Mecit; Doğan, Mehmet; Demirbaş, Ozkan

    2005-11-15

    In this study, the adsorption properties of unexpanded and expanded perlite samples in aqueous cetyltrimethylammonium bromide (CTAB) solutions were investigated as a function of ionic strength, pH, and temperature. It was found that the amount of cetyltrimethylammonium bromide adsorbed onto unexpanded perlite was greater than that onto expanded perlite. For both perlite samples, the sorption capacity increased with increasing ionic strength and pH and decreasing temperature. Experimental data were analyzed by Langmuir and Freundlich isotherms and it was found that the experimental data were correlated reasonably well by the Freundlich adsorption isotherm. Furthermore, the isotherm parameters (KF and n) were also calculated. The adsorption enthalpy was determined from experimental data at different temperatures. Results have shown that the interaction between the perlite surface and CTAB is a physical interaction, and the adsorption process is an exothermic one.

  5. Infrared spectrophotometric analysis of acidified aqueous sodium oleate solutions

    Science.gov (United States)

    Drzymala, Jan; Kielkowska, M. M.

    Infrared spectroscopy was applied to the analysis of 10 -3 M aqueous sodium oleate solutions titrated with 0.2 M HCl. From characteristic absorption bands of sodium oleate at 1560 cm -1 and oleic acid at 1710 cm -1 the degree of oleate ion neutralization in the titrated system at varying pH was calculated.It was found that the pH-metric titration curve of oleate ions differs considerably from the theoretical curve calculated for the reaction Ol -aq + H + = HOl liq, taking the solubility product of oleic acid equal to 12.5. Most likely aggregates of oleate ons (micelles) are formed during titration and account for the deviation of the titration curves from theory.

  6. Experimental study on thermophoresis of colloids in aqueous surfactant solutions

    Science.gov (United States)

    Dong, Ruo-Yu; Zhou, Yi; Yang, Chun; Cao, Bing-Yang

    2015-12-01

    Thermophoresis refers to the motion of particles under a temperature gradient and it is one of the particle manipulation techniques. Regarding the thermophoresis of particles in liquid media, however, many open questions still remain, especially the role of the interfacial effect. This work reports on a systematic experimental investigation of surfactant effects, especially the induced interfacial effect, on the thermophoresis of colloids in aqueous solutions via a microfluidic approach. Two kinds of commonly used surfactants, sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB), are selected and the results show that from relatively large concentrations, the two surfactants can greatly enhance the thermophilic mobilities. Specifically, it is found that the colloid-water interfaces modified with more polar end groups can potentially lead to a stronger thermophilic tendency. Due to the complex effects of surfactants, further theoretical model development is needed to quantitatively describe the dependence of thermophoresis on the interface characteristics.

  7. Transport Process of Isopropanol Aqueous Solution by Pervaporation

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    To study the transport process of isopropanol aqueous solution by pervaporation, the transport model of isopropanol and that of water at 323 K in polyvinyl alcohol(PVA) membrane were obtained in this paper. Theoretical predictions agreed well with the experimental results. The interactional parameter between water and PVA membrane is less than that between isopropanol and PVA membrane, which shows that water is preferentially dissolved in PVA membrane. The plasticizing coefficient and diffusion coefficient at infinite dilution of water are larger than those of isopropanol,which shows that the dissolution and permeation in PVA membrane of water are greater than those of isopropanol. Both the interactional parameter between water and isopropanol in the membrane and that in feed rise with the increase of isopropanol content in feed, which shows that the larger isopropanol content is, the higher selectivity of the membrane is and the more remarkable separation effect of pervaporation is.

  8. Application of ultrasound to textiles washing in aqueous solutions.

    Science.gov (United States)

    Gotoh, Keiko; Harayama, Kokoro

    2013-03-01

    The ultrasound was applied to textile washing as a mechanical action for soil removal. The polyester fabric was soiled with carbon black or oleic acid as a model contaminant, and washed with the original fabric in aqueous solutions without and with alkali or surfactant by applying ultrasound, shaking or stirring action. The detergency and soil redeposition were evaluated from the change in the surface reflectance of artificially soiled fabrics and the original fabric due to washing. In comparison with shaking and stirring actions, ultrasound was found to remove the particulate and oily soils efficiently in a short time and at low bath ratio. With increasing ultrasound power, the detergency of both soils increased and exceeded that obtained with Wascator, a horizontal axis drum type washer. Using three standard fabrics for determining mechanical action during washing, it was shown that ultrasound washing caused little mechanical damage to the fabric. However, the soil redeposition was frequently observed for ultrasonic washing, especially at low bath ratio.

  9. Conformation of poly(γ-glutamic acid) in aqueous solution.

    Science.gov (United States)

    Muroga, Yoshio; Nakaya, Asami; Inoue, Atsuki; Itoh, Daiki; Abiru, Masaya; Wada, Kaori; Takada, Masako; Ikake, Hiroki; Shimizu, Shigeru

    2016-04-01

    Local conformation and overall conformation of poly(γ-DL-glutamic acid) (PγDLGA) and poly(γ-L-glutamic acid) (PγLGA) in aqueous solution was studied as a function of degree of ionization ε by (1) H-NMR, circular dichroism, and potentiometric titration. It was clarified that their local conformation is represented by random coil over an entire ε range and their overall conformation is represented by expanded random-coil in a range of ε > ε(*) , where ε(*) is about 0.3, 0.35, 0.45, and 0.5 for added-salt concentration of 0.02M, 0.05M, 0.1M, and 0.2M, respectively. In a range of ε acidic media.

  10. Infrared spectroscopy for monitoring gas hydrates in aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Dobbs, G.T.; Luzinova, Y.; Mizaikoff, B. [Georgia Inst. of Technology, Atlanta, GA (United States). School of Chemistry and Biochemistry; Raichlin, Y.; Katzir, A. [Tel-Aviv Univ., Tel-Aviv (Israel). Shool of Physics and Astronomy

    2008-07-01

    This paper introduced the first principles for monitoring gas hydrate formation and dissociation in aqueous solution by evaluating state-responsive infrared (IR) absorption features of water with fiberoptic evanescent field spectroscopy. A first order linear functional relationship was also derived according to Lambert Beer's law in order to quantify the percentage gas hydrate within the volume of water probed via the evanescent field. In addition, spectroscopic studies evaluating seafloor sediments collected from a gas hydrate site in the Gulf of Mexico revealed minimal spectral interferences from sediment matrix components. As such, evanescent field sensing strategies were established as a promising perspective for monitoring the dynamics of gas hydrates in oceanic environments. 21 refs., 5 figs.

  11. Degradation of aqueous solutions of camphor by heterogeneous photocatalysis.

    Science.gov (United States)

    Sirtori, Carla; Altvater, Priscila K; de Freitas, Adriane M; Peralta-Zamora, Patricio G

    2006-02-28

    In this study the photocatalytic degradation of aqueous solutions of camphor was investigated by using TiO2 and ZnO photocatalysts. In the presence of artificial UV-light the highly photosensitive camphor was almost totally degraded after reaction times of 60 min. However, under these conditions the mineralization degree was lower than 25%. In the presence of semiconductors the degradation was complete after a treatment time of about 30 min. Moreover, the mineralization was considerably greater, mainly with the use of TiO2 (> 80% at reaction time of 60 min). Heterogeneous photocatalytic processes applied in the presence of solar radiation show a promising degradation capability. TiO2-based processes afforded mineralization degrees of about 90% after a reaction time of 120 min, when the system was assisted by aeration.

  12. Microfluidic synthesis of monodisperse Cu nanoparticles in aqueous solution.

    Science.gov (United States)

    Ke, Te; Zeng, Xiao-Fei; Wang, Jie-Xin; Le, Yuan; Chu, Guang-Wen; Chen, Jian-Feng; Shao, Lei

    2011-06-01

    The continuous production of Cu nanoparticles with a particle size of 2-5 nm was conducted by sodium borohydride reduction of copper sulfate in aqueous solution in a tube-in-tube microchannel reactor (TMR), which consists of an inner tube and an outer tube with the reaction performed in the annular microchannel between these two tubes. The as-prepared Cu nanoparticles were compared with those obtained by a conventional batch synthesis process by using transmission electron microscopy (TEM), X-ray diffraction (XRD) and UV-vis spectroscopy. Due to the highly intensified micromixing effects in the TMR, Cu nanoparticles prepared by this route exhibits a smaller particle size, narrower size distribution and better stability in air. The TMR shows an excellent ability of preparing high-quality Cu nanoparticles in mild conditions. In addition, with the unique microchannel structure, the throughput capability of the TMR for the production of Cu nanoparticles is up to several liters per minute.

  13. Voltammetric oxidation of dipyridamole in aqueous acid solutions

    Directory of Open Access Journals (Sweden)

    Castilho Marilza

    2000-01-01

    Full Text Available The electrochemical oxidation of dipyridamole (DIP has been studied in acidified aqueous solutions at platinum electrodes employing cyclic voltammetry and controlled-potential electrolysis. The progress of the anodic oxidation as a function of time was monitored by cyclic voltammetry with platinum ultramicroelectrodes, absorption and fluorescence optical spectroscopies, the resulting integrated charge being indicative of a two electron process. The cyclic voltammograms registered for low scan speeds are characterized by a single irreversible diffusion controlled anodic wave, the related cathodic wave being also observable for scan speeds higher than 1 V s-1. Oxidation reaction stoichiommetric parameters were obtained through Tafel slopes resulting in unitary reaction orders for DIP and H+.

  14. Adsorption of catechol from aqueous solution by aminated hypercrosslinked polymers

    Institute of Scientific and Technical Information of China (English)

    SUN Yue; LI Xiao-tao; XU Chao; CHEN Jin-long; LI Ai-min; ZHANG Quan-xing

    2005-01-01

    Adsorption of catechol from aqueous solution with the hypercrosslinked polymeric adsorbent NDA-100 and its derivatives AH-1,AH-2 and AH-3 aminated by dimethylamine, the commercial resin Amberlite XAD-4 and weakly basic anion exchanger resin D301 was compared. It was found that the aminated hypercrosslinked resins had the highest adsorption capacities among the tested polymers. The empirical Freundlich equation was successfully employed to describe the adsorption process. Specific surface area and micropore structure of the adsorbent, in company with tertiary amino groups on matrix affected the adsorption performance towards catechol. In addition,thermodynamic study was carried out to interpret the adsorption mechanism. Kinetic study testified that the tertiary amino groups on the polymer matrix could decrease the adsorption rate and increase the adsorption apparent activation energy.

  15. Adsorption of Anthraquinone Dyes from Aqueous Solutions by Penicillium Terrestre

    Institute of Scientific and Technical Information of China (English)

    XIN Bao-ping; LIU Xiao-mei

    2006-01-01

    Penicillium terrestre was used for removing four anthraquinone dyes from aqueous solution. The experiments were performed in Erlenmeyer flasks and spore suspension was used for inoculation. The results show that the mechanism of dye removal by penicillium terrestre is biosorption and the growing pellets exhibit higher adsorptive capacity than the resting or dead ones. The maximum removals of disperse blue 2BLN, reactive brilliant blue KN-R, acid anthraquinone blue and bromamine acid at the concentration of 120 mg/L by biosorption of growing pellets are 100 %, 100 %, 96 % and 91%, respectively. The 100.0 % and 91.4 % KN-R removals are achieved respectively at the much higher concentration of 250 and 400 mg/L. 2.5 g/L glucose is sufficient for 100% KN-R removal by growing pellets. Salinity (NaC1) increase from 0 to 2% (W/V) moderately accelerates both mycelium growth and KN-R removal.

  16. Electron-beam-induced deposition of gold from aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Schardein, G; Donev, E U; Hastings, J T, E-mail: hastings@engr.uky.edu [Department of Electrical and Computer Engineering and Center for Nanoscale Science and Engineering (CeNSE), University of Kentucky, Lexington, KY 40506 (United States)

    2011-01-07

    Focused electron-beam-induced deposition (EBID) using bulk liquid precursors is a novel approach to nanofabrication that has shown improvements in purity compared to EBID with gas-phase precursors. Here we report the first EBID of gold using bulk liquid precursors. We study the differences in gold deposited from three different aqueous solutions containing chloroauric acid (HAuCl{sub 4}), sodium tetrachloroaurate (NaAuCl{sub 4}), and the disulfitoaurate complex ([Au(SO{sub 3}){sub 2}]{sup 3-}). We also examine the dependence of threshold dose upon precursor concentration and demonstrate high-resolution patterning with a pitch as small as 50 nm. Finally, we show that the purity of gold deposited using these liquid precursors is significantly improved in comparison with deposits from metal-organic gaseous precursors.

  17. Adsorption of basic dye from aqueous solution onto fly ash

    Energy Technology Data Exchange (ETDEWEB)

    J.X. Lin; S.L. Zhan; M.H. Fang; X.Q. Qian; H. Yang [Zhejiang University, Hangzhou (China). College of Civil Engineering and Architecture

    2008-04-15

    The fly ash treated by H{sub 2}SO{sub 4} was used as a low-cost adsorbent for the removal of a typical dye, methylene blue, from aqueous solution. An increase in the specific surface area and dye-adsorption capacity was observed after the acid treatment. The adsorption isotherm and kinetics of the treated fly ash were studied. The experimental results were fitted using Langmuir and Freundlich isotherms. It shows that the Freundlich isotherm is better in describing the adsorption process. Two kinetic models, pseudo-first order and pseudo-second order, were employed to analyze the kinetic data. It was found that the pseudo-second-order model is the better choice to describe the adsorption behavior. The thermodynamic study reveals that the enthalpy ({Delta}H{sup 0}) value is positive (5.63 kJ/mol), suggesting an endothermic nature of the adsorption.

  18. Removal of lead from aqueous solutions by Penicillium biomass

    Energy Technology Data Exchange (ETDEWEB)

    Hui Niu; Xue Shu Xu; Jian Hua Wang (Chengdu Univ. of Science and Technology, Sichuan (China). Dept. of Chemical Engineering); Volesky, B. (McGill Univ., Montreal (Canada). Dept. of Chemical Engineering)

    1993-09-05

    The removal of lead ions from aqueous solutions by adsorption on nonliving Penicillium chrysogenum biomass was studied. Biosorption of the Pb[sup +2] ion was strongly affected by pH. Within a pH range of 4 to 5, the saturated sorption uptake of Pb[sup +2] was 116 mg/g dry biomass, higher than that of activated charcoal and some other microorganisms. At pH 4.5, P. chrysogenum biomass exhibited selectivity for Pb[sup +2] over other metal ions such as Cd[sup +2], Cu[sup +2], Zn [sup +2], and As[sub +3]. Sorption preference for metals decreased in the following order: Pb > Cd > Cu > Zn > As. The sorption uptake of Pb[sup +2] remained unchanged in the presence of Cu[sup +2] and As [sup +3], it decreased in the presence of Zn[sup +2], and increased in the presence of Cd[sup +2].

  19. VISCOSITY BEHAVIOR OF LACQUER POLYSACCHARIDE IN AQUEOUS SOLUTION

    Institute of Scientific and Technical Information of China (English)

    QIU Xingping; ZHANG Lina; DU Yumin; QIAN Baogong

    1991-01-01

    The dependence of measured viscosity on NaCl concentration (0.1 to 3.0M), pH (range of 2-13) and cadoxen composition Wcad (from 2% to 100% ) for the lacquer polysaccharide in NaCl/cadoxen/H2O mixture containing HCl or without were obtained. All the viscosity exponents γ in the Mark-Houwink equations under three different solvent condition are close to 0.5. The wcad dependence of reduced viscosity ηsp/c confirms the single strand chain of the polysaccharide. As the γ values close to 0.5 and values of unperturbed dimension θ/M and [η] much smaller than those for usual linear polymers, these facts suggest that the polysaccharide chains in the aqueous solutions should be dense random coil owing to the highly branched structure.

  20. Mechanism of chitosan adsorption on silica from aqueous solutions.

    Science.gov (United States)

    Tiraferri, Alberto; Maroni, Plinio; Rodríguez, Diana Caro; Borkovec, Michal

    2014-05-06

    We present a study of the adsorption of chitosan on silica. The adsorption behavior and the resulting layer properties are investigated by combining optical reflectometry and the quartz crystal microbalance. Exactly the same surfaces are used to measure the amount of adsorbed chitosan with both techniques, allowing the systematic combination of the respective experimental results. This experimental protocol makes it possible to accurately determine the thickness of the layers and their water content for chitosan adsorbed on silica from aqueous solutions of varying composition. In particular, we study the effect of pH in 10 mM NaCl, and we focus on the influence of electrolyte type and concentration for two representative pH conditions. Adsorbed layers are stable, and their properties are directly dependent on the behavior of chitosan in solution. In mildly acidic solutions, chitosan behaves like a weakly charged polyelectrolyte, whereby electrostatic attraction is the main driving force for adsorption. Under these conditions, chitosan forms rigid and thin adsorption monolayers with an average thickness of approximately 0.5 nm and a water content of roughly 60%. In neutral solutions, on the other hand, chitosan forms large aggregates, and thus adsorption layers are significantly thicker (∼10 nm) as well as dissipative, resulting in a large maximum of adsorbed mass around the pK of chitosan. These films are also characterized by a substantial amount of water, up to 95% of their total mass. Our results imply the possibility to produce adsorption layers with tailored properties simply by adjusting the solution chemistry during adsorption.

  1. Influence of Hf solute additions on the precipitation and hardenability in Ni-rich NiTi alloys

    Energy Technology Data Exchange (ETDEWEB)

    Hornbuckle, B.C. [The University of Alabama, Department of Metallurgical and Materials Engineering, Tuscaloosa, AL 35487 (United States); Noebe, R.D. [NASA Glenn Research Center, Materials and Structures Division, Cleveland, OH 44135 (United States); Thompson, G.B., E-mail: gthompson@eng.ua.edu [The University of Alabama, Department of Metallurgical and Materials Engineering, Tuscaloosa, AL 35487 (United States)

    2015-08-15

    Highlights: • The initial hardening for all alloys was due to the precipitation of Ni{sub 4}Ti{sub 3}. • Extended aging resulted in H-phase precipitation for all the alloys. • Its presence yielded a slight secondary increase in hardness for all alloys. • The 56Ni–40Ti–4Hf (at.%) alloy yielded the highest hardness with a value of 679 VHN. • H-phase also appeared to alter the decomposition sequence of Ni{sub 4}Ti{sub 3} in this alloy. - Abstract: Very Ni-rich NiTi alloys have recently been shown to have an unusually high hardness, comparable to tool steels, and other attributes that make them promising candidates for bearing and related applications. This high hardness has been associated with the precipitation of a large volume fraction of Ni{sub 4}Ti{sub 3} platelets, resulting in a matrix that consists of narrow B2 matrix channels. In this work, a series of Ni-rich ternary alloys with dilute solute additions of Hf (54Ni–45Ti–1Hf, 55Ni–44Ti–1Hf, 54Ni–44Ti–2Hf, and 56Ni–40Ti–4Hf (at.%)) have been investigated. Transmission electron microscopy confirmed a B2 NiTi matrix phase containing nanoscale Ni{sub 4}Ti{sub 3} platelets, H-phase precipitates, and R-phase; however, the H-phase and R-phase were not present initially but only after aging for a period of time. At aging times greater than ∼100 h at 400 °C, all ternary alloys showed a slight secondary increase in hardness, which was attributed to H-phase precipitation and growth within the B2 channels. In the particular case of the 56Ni–40Ti–4Hf alloy, hardness increased with aging to a maximum value of 679 VHN, which was greater than all other binary or ternary alloys examined. Additionally the H-phase appeared to alter or delay the typical breakdown sequence of the metastable Ni{sub 4}Ti{sub 3} strengthening phase by removing the excess Ni needed for its decomposition. The collective results provide new material insights for creating a next-generation NiTi based bearing alloy.

  2. Removal of zirconium from aqueous solution by modified clinoptilolite

    Energy Technology Data Exchange (ETDEWEB)

    Faghihian, H., E-mail: h.faghih@sci.ui.ac.ir [Department of Chemistry, University of Isfahan, 81746-73441, Isfahan (Iran, Islamic Republic of); Kabiri-Tadi, M. [Department of Chemistry, University of Isfahan, 81746-73441, Isfahan (Iran, Islamic Republic of)

    2010-06-15

    Adsorptive behavior of natural clinoptilolite was assessed for the removal of zirconium from aqueous solutions. Natural zeolite was characterized by X-ray diffraction, X-ray fluorescence, thermal methods of analysis and FTIR. The zeolite sample composed mainly of clinoptilolite and presented a cation exchange capacity of 1.46 meq g{sup -1}. K, Na and Ca-exchanged forms of zeolite were prepared and their sorption capacities for removal of zirconium from aqueous solutions were determined. The effects of relevant parameters, including initial concentration, contact time, temperature and initial pH on the removal efficiency were investigated in batch studies. The pH strongly influenced zirconium adsorption capacity and maximal capacity was obtained at pH 1.0. The maximum removal efficiency obtained at 40 deg. C and equilibration time of 24 h on the Ca-exchanged form. Kinetics and isotherm of adsorption were also studied. The pseudo-first-order, pseudo-second-order, Elovich and intra-particle diffusion models were used to describe the kinetic data. The pseudo-second-order kinetic model provided excellent kinetic data fitting (R{sup 2} > 0.998) with rate constant of 1.60 x 10{sup -1}, 1.96 x 10{sup -1}, 2.45 x 10{sup -1} and 2.02 x 10{sup -1} g mmol{sup -1} min{sup -1} respectively for Na, K, Ca-exchanged forms and natural clinoptilolite. The Langmuir and Freundlich models were applied to describe the equilibrium isotherms for zirconium uptake and the Langmuir model agrees very well with experimental data. Thermodynamic parameters were determined and are discussed.

  3. Cations bind only weakly to amides in aqueous solutions.

    Science.gov (United States)

    Okur, Halil I; Kherb, Jaibir; Cremer, Paul S

    2013-04-01

    We investigated salt interactions with butyramide as a simple mimic of cation interactions with protein backbones. The experiments were performed in aqueous metal chloride solutions using two spectroscopic techniques. In the first, which provided information about contact pair formation, the response of the amide I band to the nature and concentration of salt was monitored in bulk aqueous solutions via attenuated total reflection Fourier transform infrared spectroscopy. It was found that molar concentrations of well-hydrated metal cations (Ca(2+), Mg(2+), Li(+)) led to the rise of a peak assigned to metal cation-bound amides (1645 cm(-1)) and a decrease in the peak associated with purely water-bound amides (1620 cm(-1)). In a complementary set of experiments, the effect of cation identity and concentration was investigated at the air/butyramide/water interface via vibrational sum frequency spectroscopy. In these studies, metal ion-amide binding led to the ordering of the adjacent water layer. Such experiments were sensitive to the interfacial partitioning of cations in either a contact pair with the amide or as a solvent separated pair. In both experiments, the ordering of the interactions of the cations was: Ca(2+) > Mg(2+) > Li(+) > Na(+) ≈ K(+). This is a direct cationic Hofmeister series. Even for Ca(2+), however, the apparent equilibrium dissociation constant of the cation with the amide carbonyl oxygen was no tighter than ∼8.5 M. For Na(+) and K(+), no evidence was found for any binding. As such, the interactions of metal cations with amides are far weaker than the analogous binding of weakly hydrated anions.

  4. Humic acid removal from aqueous solutions by peroxielectrocoagulation process

    Directory of Open Access Journals (Sweden)

    Ahmad Reza Yazdanbakhsh

    2015-06-01

    Full Text Available Background: Natural organic matter is the cause of many problems associated with water treatment such as the presence of disinfection by-products (DBPs and membrane fouling during water filtration. In this study, the performance of the peroxi-electrocoagulation process (PEP was investigated for the removal of humic acids (HAs from aqueous solutions. Methods: PEP was carried out for the removal of HA using a plexiglas reactor with a volume of 2 L and fitted with iron electrodes and a direct current supply (DC. Samples were taken at various amounts of pH (2-4, current density (1 and 2A/cm2, hydrogen peroxide (50-150 mg/L and reaction time (5-20 minutes and then filtered to remove sludge formed during reaction. Finally, the HA concentration was measured by UV absorbance at 254 nm (UV254. Results: Results indicated that increasing the concentration of H2O2 from 50 to 150 mg/L increased HA removal efficiency from 83% to 94.5%. The highest removal efficiency was observed at pH 3.0; by increasing the pH to the alkaline range, the efficiency of the process was reduced. It was found that HA removal efficiency was high in current density 1A/cm2. Increasing current density up to 1 A cm-2 caused a decrease in removal efficiency. Results of this study showed that under the optimum operating range for the process ([current density] = 1A/cm2, [hydrogen peroxide concentration] = 150 mg/L, [reaction time]= 20 minutes and [pH]= 3.0, HA removal efficiency reached 98%. Conclusion: It can be concluded that PEP has the potential to be utilized for cost-effective removal of HA from aqueous solutions.

  5. Biosorption of arsenic from aqueous solution using dye waste.

    Science.gov (United States)

    Nigam, Shubha; Vankar, Padma S; Gopal, Krishna

    2013-02-01

    The purpose of this study is to examine on removal of arsenic from water by biosorption through potential application of herbal dye wastes. Four different flower dye residues (after extraction of natural dye) viz. Hibiscus rosasinensis, Rosa rosa, Tagetes erecta, and Canna indica were utilized successfully for the removal of arsenic from aqueous solution. Batch studies were carried out for various parameters viz. pH, sorbent dose, contact time, initial metal ion concentration, and temperature. Data were utilized for isothermal, kinetic, and thermodynamic studies. Scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDAX), and Fourier transform infrared (FTIR) analyses of biomass were performed. The results showed that 1 g/100 ml for 5.0-5.5 h contact time at pH 6.0-7.5 with agitation rate 150 rpm provided 98, 96, 92, and 85 % maximum absorption of arsenic by R. rosa, H. rosasinensis, T. erecta, and C. indica, respectively, at initial concentration of 500 ppb. Data followed Langmuir isotherm showing sorption to be monolayer on heterogeneous surface of biosorbent. Negative values of ΔG° indicated spontaneous nature, whereas ΔH° indicates exothermic nature of system followed by pseudo-first-order adsorption kinetics. FTIR results showed apparent changes in functional group regions after metal chelation. SEM and EDAX analyses showed the changes in surface morphology of all test biosorbents. Herbal dye wastes, used as biosorbent, exhibited significant (85-98 %) removal of arsenic from aqueous solution. Hence, these biosorbents are cost-effective, easily available, eco-friendly, and comparatively more effective than other biosorbents already in use. These may be used to remove arsenic and other toxic metals from water.

  6. Self-referenced sensing based on terahertz metamaterial for aqueous solutions

    Science.gov (United States)

    Wu, Xiaojun; Pan, Xuecong; Quan, Baogang; Xu, Xinlong; Gu, Changzhi; Wang, Li

    2013-04-01

    We demonstrated a self-referenced sensing method in reflection geometry for characterizing aqueous solutions based on terahertz metamaterials. The sensing signal and the reference signal are taken in one measurement from different interfaces of the substrate. For ethanol-water mixture and aqueous solution of NaCl, the line-shape of the modulated response shows distinct polarity, while the peak-valley value near resonant region depends linearly on the solution concentration. These observations result from the variation of dielectric environment near the interface between the metamaterials and the aqueous solutions. This method holds promise for future application in monitoring real aqueous biosystems and ecological water systems.

  7. HFSE (High Field Strength Elements)-transport and U-Pb-Hf isotope homogenization mediated by Ca-bearing aqueous fluids at 2.04 Ga: Constraints from zircon, monazite, and garnet of the Venetia Klippe, Limpopo Belt, South Africa

    Science.gov (United States)

    Zeh, A.; Gerdes, A.

    2014-08-01

    Results from laser-ablation inductively-coupled-plasma mass spectrometry (LA-ICP-MS) and isotope dilution (ID) analyses of minerals and rocks from a single outcrop of the Venetia Klippe of the Limpopo Belt indicate that the U-Pb and Hf isotope system homogenized on the decimetre scale under amphibolite-facies conditions of ⩽645 ± 25 °C and ⩽7.0 ± 1.1 kbar, i.e. in the presence of an aqueous fluid phase. For a metabasite sample, homogenization is supported by isotope analyses of metamorphic zircon, garnet, and whole rock, which yield a six-point Lu-Hf isochron age of 2039.7 ± 3.4 Ma, with initial 176Hf/177Hf of 0.28126 ± 0.00001, and a U-Pb zircon age of 2042 ± 10 Ma. The occurrence of a few inherited magmatic zircon cores with ages up to 2705 Ma, and with significantly lower initial 176Hf/177Hf of 0.28112, however, indicate that homogenization was incomplete. For a chlorite-biotite-garnet schist isotope homogenization is reflected by within error identical zircon and monazite U-Pb ages of 2045 ± 10 Ma and 2041 ± 8 Ma, respectively, and by a zircon-garnet-whole rock Lu-Hf isochron age of 2083 ± 63 Ma, with an initial 176Hf/177Hf of 0.28140 ± 0.00003. Contemporaneous formation of metamorphic zircon, monazite and garnet in the chlorite schist is not only supported by the isotope data, but also by chlorite inclusions in all three minerals, and by inclusions of metamorphic zircon in garnet. The inclusion textures and the identical initial 176Hf/177Hf support the conclusion that metamorphic zircon grains precipitated from an aqueous fluid phase, after dissolution of zirconium-bearing phases elsewhere, followed by a major HFSE transport, and Hf isotope homogenization. This fluid perhaps was Ca-bearing, as is suggested by the fact that garnet in the schist sample is the only Ca-bearing phase, and that metamorphic monazite, dating the metamorphic peak, is partially replacement by apatite. The fact that the metamorphic zircon rims in the metabasite sample have

  8. Adsorption of cesium on cement mortar from aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Volchek, Konstantin, E-mail: konstantin.volchek@ec.gc.ca [Emergencies Science and Technology Section, Environment Canada, 335 River Road, Ottawa, Ontario, Canada K1A 0H3 (Canada); Miah, Muhammed Yusuf [Emergencies Science and Technology Section, Environment Canada, 335 River Road, Ottawa, Ontario, Canada K1A 0H3 (Canada); Department of Applied Chemistry and Chemical Technology, Noakhali Science and Technology University (Bangladesh); Kuang, Wenxing; DeMaleki, Zack [Emergencies Science and Technology Section, Environment Canada, 335 River Road, Ottawa, Ontario, Canada K1A 0H3 (Canada); Tezel, F. Handan [Department of Chemical and Biological Engineering, University of Ottawa, 161 Louis-Pasteur, Ottawa, Ontario, Canada K1N 6N5 (Canada)

    2011-10-30

    Highlights: {yields} The adsorption of cesium on cement mortar was investigated in a range of temperatures and cesium concentrations. {yields} The pseudo-second order kinetic model produced a good fit with the experimental kinetic data. {yields} Equilibrium test results correlated well with the Freundlich isotherm adsorption model. {yields} The interaction between cesium ions and cement mortar was dominated by chemical adsorption. - Abstract: The adsorption of cesium on cement mortar from aqueous solutions was studied in series of bench-scale tests. The effects of cesium concentration, temperature and contact time on process kinetics and equilibrium were evaluated. Experiments were carried out in a range of initial cesium concentrations from 0.0103 to 10.88 mg L{sup -1} and temperatures from 278 to 313 K using coupons of cement mortar immersed in the solutions. Non-radioactive cesium chloride was used as a surrogate of the radioactive {sup 137}Cs. Solution samples were taken after set periods of time and analyzed by inductively coupled plasma mass spectroscopy. Depending on the initial cesium concentration, its equilibrium concentration in solution ranged from 0.0069 to 8.837 mg L{sup -1} while the respective surface concentration on coupons varied from 0.0395 to 22.34 {mu}g cm{sup -2}. Equilibrium test results correlated well with the Freundlich isotherm model for the entire test duration. Test results revealed that an increase in temperature resulted in an increase in adsorption rate and a decrease in equilibrium cesium surface concentration. Among several kinetic models considered, the pseudo-second order reaction model was found to be the best to describe the kinetic test results in the studied range of concentrations. The adsorption activation energy determined from Arrhenius equation was found to be approximately 55.9 kJ mol{sup -1} suggesting that chemisorption was the prevalent mechanism of interaction between cesium ions and cement mortar.

  9. Lead removal from aqueous solutions by a Tunisian smectitic clay.

    Science.gov (United States)

    Chaari, Islem; Fakhfakh, Emna; Chakroun, Salima; Bouzid, Jalel; Boujelben, Nesrine; Feki, Mongi; Rocha, Fernando; Jamoussi, Fakher

    2008-08-15

    The adsorption of Pb(2+) ions onto Tunisian smectite-rich clay in aqueous solution was studied in a batch system. Four samples of clay (AYD, AYDh, AYDs, AYDc) were used. The raw AYD clay was sampled in the Coniacian-Early Campanian of Jebel Aïdoudi in El Hamma area (South of Tunisia). AYDh and AYDs corresponds to AYD activated by 2.5 mol/l hydrochloric acid and 2.5 mol/l sulphuric acid, respectively. AYDc corresponds to AYD calcined at different temperatures (100, 200, 300, 400, 500 and 600 degrees C). The raw AYD clay was characterized by X-ray diffraction, chemical analysis, infrared spectroscopy and coupled DTA-TGA. Specific surface area of all the clay samples was determined from nitrogen adsorption isotherms. Preliminary adsorption tests showed that sulphuric acid and hydrochloric acid activation of raw AYD clay enhanced its adsorption capacity for Pb(2+) ions. However, the uptake of Pb(2+) by AYDs was very high compared to that by AYDh. This fact was attributed to the greater solubility of clay minerals in sulphuric acid compared to hydrochloric acid. Thermic activation of AYD clay reduced the Pb(2+) uptake as soon as calcination temperature reaches 200 degrees C. All these preliminary results were well correlated to the variation of the specific surface area of the clay samples. The ability of AYDs sample to remove Pb(2+) from aqueous solutions has been studied at different operating conditions: contact time, adsorbent amount, metal ion concentration and pH. Kinetic experiments showed that the sorption of lead ions on AYDs was very fast and the equilibrium was practically reached after only 20 min. The results revealed also that the adsorption of lead increases with an increase in the solution pH from 1 to 4.5 and then decreases, slightly between pH 4.5 and 6, and rapidly at pH 6.5 due to the precipitation of some Pb(2+) ions. The equilibrium data were analysed using Langmuir isotherm model. The maximum adsorption capacity (Q(0)) increased from 25 to 25

  10. Gamma Radiolysis Studies of Aqueous Solution of Brilliant Green Dye

    Directory of Open Access Journals (Sweden)

    D. V. Parwate

    2011-01-01

    Full Text Available The effect of γ–radiation on colour intensity of aqueous solution of Brilliant Green has been investigated at two different concentrations. The degradation of Brilliant Green (BG has also been investigated in presence of suspended ZnO, by adding different amounts of ZnO. Simultaneously the conductance and pH of each solution system were measured before and after γ-irradiation. All the γ–irradiations were performed at a dose rate of 0.60 kGyhr-1 in GC-900. The maximum dose required for the complete degradation of the dye was found to be 0.39 kGy. G(-dye values were found to decrease with increase in gamma dose and were in the range 4.26 - 12.81. The conductance (7.6 - 25.3 μS and pH values increased marginally with dose for both the concentrations. The rate of decolouration was found to be high at lower doses and the efficiency of dye removal was higher at low concentration of the dye. This may be attributed to the presence of reaction by-products from the destruction of parent compound build up and compete for reaction intermediate species. The rate of reaction and rate constants were calculated and it was found that the degradation reaction follows first order kinetics. It was found that the decolouration percentage was more in dye systems in absence of ZnO.

  11. Photocatalytic decomposition of cortisone acetate in aqueous solution.

    Science.gov (United States)

    Romão, Joana Sobral; Hamdy, Mohamed S; Mul, Guido; Baltrusaitis, Jonas

    2015-01-23

    The photocatalytic decomposition of cortisone 21-acetate (CA), a model compound for the commonly used steroid, cortisone, was studied. CA was photocatalytically decomposed in a slurry reactor with the initial rates between 0.11 and 0.46 mg L(-1)min(-1) at 10 mg L(-1) concentration, using the following heterogeneous photocatalysts in decreasing order of their catalytic activity: ZnO>Evonik TiO2 P25>Hombikat TiO2>WO3. Due to the lack of ZnO stability in aqueous solutions, TiO2 P25 was chosen for further experiments. The decomposition reaction was found to be pseudo-first order and the rate constant decreased as a function of increasing initial CA concentration. Changing the initial pH of the CA solution did not affect the reaction rate significantly. The decomposition reaction in the presence of the oxidizing sacrificial agent sodium persulfate showed an observed decomposition rate constant of 0.004 min(-1), lower than that obtained for TiO2 P25 (0.040 min(-1)). The highest photocatalytic degradation rate constant was obtained combining both TiO2 P25 and S2O8(2-) (0.071 min(-1)) showing a synergistic effect. No reactive intermediates were detected using LC-MS showing fast photocatalytic decomposition kinetics of CA. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Decomposition of 2-mercaptothiazoline in aqueous solution by ozonation.

    Science.gov (United States)

    Chen, Y H; Chang, C Y; Chen, C C; Chiu, C Y; Yu, Y H; Chiang, P C; Ku, Y; Chen, J N; Chang, C F

    2004-07-01

    This study investigates the ozonation of 2-mercaptothiazoline (2-MT). The 2-MT is one of the important organic additives for the electroplating solution of the printed wiring board industry and has been widely used as a corrosion inhibitor in many industrial processes. It is of concern for the aquatic pollution control especially in the wastewaters. Semibatch ozonation experiments in the completely stirred tank reactor are performed under various concentrations of input ozone. The concentrations of 2-MT, sulfate, and ammonium are analyzed at specified time intervals to elucidate the decomposition of 2-MT during the ozonation. In addition, the time variation of the dissolved ozone concentration (C(ALb)) is continuously monitored in the course of experiments. Total organic carbon (TOC) is chosen and measured as a mineralization index of the ozonation of 2-MT. The results indicate that the decomposition of 2-MT is efficient, while the mineralization of TOC is limited via the ozonation only. Simultaneously, the yield of sulfate with the maximum value of about 47% is characterized by the increases of TOC removal and ozone consumption. These results can provide some useful information for assessing the feasibility of the treatment of 2-MT in the aqueous solution by the ozonation.

  13. Adsorption of itaconic acid from aqueous solutions onto alumina

    Directory of Open Access Journals (Sweden)

    JELENA J. GULICOVSKI

    2008-08-01

    Full Text Available Itaconic acid, IA (C5H6O4, was investigated as a potential flocculant for the aqueous processing of alumina powders. The adsorption of IA, as a function of its concentration and pH value of the solution, onto the alumina surface was studied by the solution depletion method. The stability of the suspensions in the presence of itaconic acid was evaluated in light of the surface charge of the alumina powder used, the degree of dissociation of IA, as well as the sedimentation behavior and rheology of the suspensions. It was found that the adsorption process is extremely pH dependent; the maximum adsorption of IA onto alumina surface occurring at a pH close to the value of the first IA dissociation constant, pKa1. Also, IA does not influence the value of the point of zero charge of alumina. It was shown that IA represents an efficient flocculant for concentrated acidic alumina suspensions.

  14. Cast iron deterioration with time in various aqueous salt solutions

    Indian Academy of Sciences (India)

    Rita Mehra; Aditi Soni

    2002-02-01

    The changes with time in the corrosion rate and corrosion current density on a cast iron electrode in various aqueous salt solutions have been carried out using total immersion test and potentiostatic polarization curves. The concentration of salts taken is expected to be present in potable water. The relative behaviour of these salts towards corrosion has also been studied, which is found to be different from previous studies. The total immersion test parameters viz. weight loss, corrosion rate as well as potentiostatic parameters, open circuit potential, corr, Tafel slopes, corrosion rate, have been calculated by standard methods. Besides these the relative increase in corrosion rate with time as well as the percentage to which corrosion rate should be decreased so as to provide protection towards corrosion have also been calculated. It was found that KCl and NaCl are major contributors than MnSO4, Pb(NO3)2, KI and KBr. The relative increase in corrosion is high in KBr, KI, NaNO3, CaCl2, and less in Pb(NO3)2, NaHCO3 and CaCO3 test solutions. For the reliability of results the data has been statistically analysed.

  15. Single Molecule Electrochemical Detection in Aqueous Solutions and Ionic Liquids.

    Science.gov (United States)

    Byers, Joshua C; Paulose Nadappuram, Binoy; Perry, David; McKelvey, Kim; Colburn, Alex W; Unwin, Patrick R

    2015-10-20

    Single molecule electrochemical detection (SMED) is an extremely challenging aspect of electroanalytical chemistry, requiring unconventional electrochemical cells and measurements. Here, SMED is reported using a "quad-probe" (four-channel probe) pipet cell, fabricated by depositing carbon pyrolytically into two diagonally opposite barrels of a laser-pulled quartz quadruple-barreled pipet and filling the open channels with electrolyte solution, and quasi-reference counter electrodes. A meniscus forms at the end of the probe covering the two working electrodes and is brought into contact with a substrate working electrode surface. In this way, a nanogap cell is produced whereby the two carbon electrodes in the pipet can be used to promote redox cycling of an individual molecule with the substrate. Anticorrelated currents generated at the substrate and tip electrodes, at particular distances (typically tens of nanometers), are consistent with the detection of single molecules. The low background noise realized in this droplet format opens up new opportunities in single molecule electrochemistry, including the use of ionic liquids, as well as aqueous solution, and the quantitative assessment and analysis of factors influencing redox cycling currents, due to a precisely known gap size.

  16. Structure and phase behavior of aqueous methylcellulose solutions

    Science.gov (United States)

    McAllister, John; Schmidt, Peter; Lodge, Timothy; Bates, Frank

    2015-03-01

    Cellulose ethers (CE) constitute a multi-billion dollar industry, and have found end uses in a broad array of applications from construction materials, food products, personal care products, and pharmaceuticals for more than 80 years. Methylcellulose (MC, with the trade name METHOCEL™) is a CE in which there is a partial substitution of -OH groups with -OCH3 groups. This results in a polymer that is water-soluble at low temperatures, and aqueous solutions of MC display gelation and phase separation at higher temperatures. The nature of MC gelation has been debated for many years, and this project has made significant advances in the understanding of the solution properties of CEs. We have characterized a fibrillar structure of MC gels by cryogenic transmission electron microscopy (cryo-TEM) and small angle neutron scattering (SANS). Using light scattering, turbidity measurements, and dynamic mechanical spectroscopy (DMS) we report that MC microphase separates by nucleation and growth of fibril aggregates, and is a different process from LCST phase separation.

  17. Removal of Nitrate From Aqueous Solution Using Rice Chaff

    Directory of Open Access Journals (Sweden)

    Dehghani

    2015-09-01

    Full Text Available Background Nitrate is largely dissolved in the surface and ground water, due to its high solubility. Continual uptake of nitrite through drinking water can lead to problems and diseases (such as blue baby for humans, especially children. Objectives The aim of this study was to develop a new and inexpensive method for the removal of nitrate from water. In this regard, the possibility of using chaff for removal of nitrate from aqueous solutions was studied and the optimum operating conditions of nitrate removal was determined. Materials and Methods This is a cross-sectional study conducted in laboratory scale. The UV spectrophotometer at a wavelength of maximum absorbance (220 nm was used to determine the nitrate concentration. The effect of pH, amount of chaff, temperature, and contact time were investigated. Results The result of this study revealed that chaff as an absorbent could remove nitrate from solutions, and the efficiency of adsorption increased as contact time increased from 5 to 30 minutes, amount of chaff increased from 1 to 3 g, temperature increased in a range of 300 - 400°C and the amount of pH decreased from 10 to 3. The maximum adsorption rate was around pH 3 (53.14%. Conclusions It was shown that the removal efficiency of nitrate was directly proportional to the amount of chaff, temperature, and contact time but inversely to the pH. This study showed that nitrate removal by chaff is a promising technique.

  18. Enrichment of surfactant from its aqueous solution using ultrasonic atomization.

    Science.gov (United States)

    Takaya, Haruko; Nii, Susumu; Kawaizumi, Fumio; Takahashi, Katsuroku

    2005-08-01

    Dilute aqueous solutions of dodecyl-benzenesulfonic acid sodium salt (DBS-Na) and polyoxyethylenenonylphenyl ethers (PONPEs) were ultrasonically atomized. The surfactants were concentrated in collected mist droplets. The enrichment ratio increased with decreasing surfactant concentration. Depending on the surfactant's molecular weight and affinity to water, different enrichment ratio was observed in the range of low feed concentrations. For anionic surfactant, DBS-Na, the enrichment ratio was significantly improved by KCl addition and a peak appeared on the plot of the ratio against KCl concentration. Addition of NaCl or CaCl2 . 2H2O to the surfactant solution also enhanced the enrichment ratio; however, the effect was relatively small. Such behaviors of the ratio were interpreted as enhanced interfacial adsorption of the surfactant and a lack of supply of surfactant monomers from liquid bulk because of slow breaking of surfactant micelles. Time required for collecting an amount of mist was also observed. Among the three salt systems, the time for KCl system was twice as long as others. This fact suggested that the formation of smaller droplets in KCl system.

  19. Drop-on-demand for aqueous solutions of sodium alginate

    Science.gov (United States)

    Herran, C. Leigh; Coutris, Nicole

    2013-06-01

    Inkjet printing is a rapidly growing commercial process for applications that depend on precisely patterning micro-scale droplets. These applications increasingly require complex fluids, introducing viscoelastic properties which play an important role in droplet formation. The objective of this study is to determine how to obtain single, uniform and spherical ("successful") droplets from aqueous solutions of sodium alginate with a piezoelectric drop-on-demand printing method. In order to control the volume and velocities of droplets, the effect on the droplet formation of the characteristics of the waveform such as voltage amplitude and dwell time is studied. The results depend also on the fluid rheology. The viscosity of the chosen fluid is a function of the concentration, as the viscoelastic properties increase at higher concentration. In this paper, the droplet formation process is characterized in terms of both the waveform and the rheological properties of the solution. The characterization of the fluids and waveform will be pursued first and the droplet formation and its control will be studied. Finally, the results will be presented with a map in ranges of the Ohnesorge, Deborah and Weber numbers.

  20. Columnar molecular aggregation in the aqueous solutions of disodium cromoglycate

    Science.gov (United States)

    Agra-Kooijman, Dena M.; Singh, Gautam; Lorenz, Alexander; Collings, Peter J.; Kitzerow, Heinz-S.; Kumar, Satyendra

    2014-06-01

    Stack, chimneylike, and threadlike assemblies have previously been proposed for the structure of disodium cromoglycate (DSCG) aggregates in aqueous solutions. The results of the synchrotron x-ray scattering investigations reported here reveal the formation of simple columnar assemblies with π-π stacking at a separation of 3.4 Å between the DSCG molecules. Lateral separation between the assemblies is concentration and temperature dependent, varying from ˜35 to 42 Å in the orientationally ordered nematic (N) phase and from 27 to 32 Å in the columnar or middle (M) phase having long range lateral positional order. The assemblies' length depends on concentration and consists of ˜23 molecules in the N phase, becoming three to ten times larger in the M phase. The scission energy is concentration dependent in the N phase with values ˜7.19 ± 0.14 kBT (15 wt %), 2.73 ± 0.4 kBT (20 wt %), and 3.05 ± 0.2 kBT (25 wt %). Solutions of all concentrations undergo a spinodal decomposition at temperatures above ˜40 °C, resulting in DSCG-rich regions with the M phase and water-rich regions in the N and isotropic phases.

  1. Corrosion of metastable iron alloys in aqueous solutions

    Science.gov (United States)

    Wolf, Gerhard K.; Ferber, H.

    1983-05-01

    There exist some examples showing that metastable surface alloys can modify the corrision properties of a substrate in the same way as stable alloys do. In the present paper the corrosion behaviour of metastable surface alloys obtained by implanting gold, lead and mercury in iron was studied in aqueous solution of pH = 5.6. Potentiodynamic current density-potential curves were recorded of the implanted samples without further treatment and after isothermal annealing to temperatures up to 800°C. The results were compared with structural information on the alloys obtained by Turos et al. with α-backscattering and channeling experiments. Gold implantation turned out to enhance the active corrosion rate of iron, while lead and mercury had an impeding effect. The annealing experiments showed that the surface alloying facilitated the passivation of iron as long as the substitutional solid solution was "(meta)stable". After the breakdown at higher annealing temperatures leading to surface migration and clustering of the implanted elements a significant increase of the critical current density for passivation took place. This indicates passivation difficulties caused by the heterogeneous distribution of the "alloying" particles. In general the results suggest that substitutional metastable iron alloys cause in a systematic way corrosion inhibition or enhancement. However, their corrosion properties may change completely for non-substitutional distribution of the alloying elements as originating from annealing at higher temperatures.

  2. Metal ion removal from aqueous solution using physic seed hull.

    Science.gov (United States)

    Mohammad, Masita; Maitra, Saikat; Ahmad, Naveed; Bustam, Azmi; Sen, T K; Dutta, Binay K

    2010-07-15

    The potential of physic seed hull (PSH), Jantropha curcas L. as an adsorbent for the removal of Cd(2+) and Zn(2+) metal ions from aqueous solution has been investigated. It has been found that the amount of adsorption for both Cd(2+) and Zn(2+) increased with the increase in initial metal ions concentration, contact time, temperature, adsorbent dosage and the solution pH (in acidic range), but decreased with the increase in the particle size of the adsorbent. The adsorption process for both metal ions on PSH consists of three stages-a rapid initial adsorption followed by a period of slower uptake of metal ions and virtually no uptake at the final stage. The kinetics of metal ions adsorption on PSH followed a pseudo-second-order model. The adsorption equilibrium data were fitted in the three adsorption isotherms-Freundlich, Langmuir and Dubinin-Radushkevich isotherms. The data best fit in the Langmuir isotherm indication monolayer chemisorption of the metal ions. The adsorption capacity of PSH for both Zn(2+) and Cd(2+) was found to be comparable with other available adsorbents. About 36-47% of the adsorbed metal could be leached out of the loaded PSH using 0.1M HCl as the eluting medium.

  3. Spectrometric analysis of process etching solutions of the photovoltaic industry--determination of HNO3, HF, and H2SiF6 using high-resolution continuum source absorption spectrometry of diatomic molecules and atoms.

    Science.gov (United States)

    Bücker, Stefan; Acker, Jörg

    2012-05-30

    The surface of raw multicrystalline silicon wafers is treated with HF-HNO(3) mixtures in order to remove the saw damage and to obtain a well-like structured surface of low reflectivity, the so-called texture. The industrial production of solar cells requires a consistent level of texturization for tens of thousands of wafers. Therefore, knowing the actual composition of the etch bath is a key element in process control in order to maintain a certain etch rate through replenishment of the consumed acids. The present paper describes a novel approach to quantify nitric acid (HNO(3)), hydrofluoric acid (HF), and hexafluosilicic acid (H(2)SiF(6)) using a high-resolution continuum source graphite furnace absorption spectrometer. The concentrations of Si (via Si atom absorption at the wavelength 251.611 nm, m(0),(Si)=130 pg), of nitrate (via molecular absorption of NO at the wavelength 214.803 nm, [Formula: see text] ), and of total fluoride (via molecular absorption of AlF at the wavelength 227.46 nm, m(0,F)=13 pg) were measured against aqueous standard solutions. The concentrations of H(2)SiF(6) and HNO(3) are directly obtained from the measurements. The HF concentration is calculated from the difference between the total fluoride content, and the amount of fluoride bound as H(2)SiF(6). H(2)SiF(6) and HNO(3) can be determined with a relative uncertainty of less than 5% and recoveries of 97-103% and 96-105%, respectively. With regards to HF, acceptable results in terms of recovery and uncertainty are obtained for HF concentrations that are typical for the photovoltaic industry. The presented procedure has the unique advantage that the concentration of both, acids and metal impurities in etch solutions, can be routinely determined by a single analytical instrument. Copyright © 2012 Elsevier B.V. All rights reserved.

  4. Sonochemical degradation of martius yellow dye in aqueous solution.

    Science.gov (United States)

    Singla, Ritu; Grieser, Franz; Ashokkumar, Muthupandian

    2009-01-01

    The sonolytic degradation of the textile dye martius yellow, also known as either naphthol yellow or acid orange 24, was studied at various initial concentrations in water. The degradation of the dye followed first-order kinetics under the conditions examined. Based on gas chromatographic results and sonoluminescence measurements of sonicated aqueous solutions of the dye, it is concluded that pyrolysis does not play a significant role in its degradation. The chromatographic identification of hydroxy added species indicates that an OH radical induced reaction is the main degradation pathway of the dye. Considering the non-volatility and surface activity of the dye, the degradation of the dye most probably takes place at the bubble/solution interface. The quantitative and qualitative formation of the degradation intermediates and final products were monitored using HPLC and ESMS. The analytical results suggest that the sonolytic degradation of the dye proceeds via hydroxylation of the aryl ring and also by C-N bond cleavage of the chromophoric ring, either through OH radical attack or through another unidentified process. The identification of various intermediates and end products also imply that the degradation of martius yellow proceeds through multiple reaction pathways. Total organic carbon (TOC) analyses of the dye solutions at various times following sonication revealed that sonolysis was effective in the initial degradation of the parent dye but very slow in achieving mineralization. The slow rate of mineralization is likely to be due to the inability of many of the intermediate products such as, the carboxylic acids, to accumulate at the bubble (air/water) interface and undergo decomposition due to their high water solubility (low surface activity).

  5. Interaction of gypsum with lead in aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Astilleros, J.M., E-mail: jmastill@geo.ucm.es [Dpto. Cristalografia y Mineralogia, Universidad Complutense de Madrid, Jose Antonio Novais, 2, E-28040 Madrid (Spain); Godelitsas, A. [Department of Mineralogy and Petrology, Faculty of Geology and Geoenvironment, University of Athens, Panepistimioupoli Zographou, 15784 Athens (Greece); Rodriguez-Blanco, J.D. [School of Earth and Environments, Faculty of Environment, University of Leeds, Leeds LS2 9JT (United Kingdom); Fernandez-Diaz, L. [Dpto. Cristalografia y Mineralogia, Universidad Complutense de Madrid, Jose Antonio Novais, 2, E-28040 Madrid (Spain); Prieto, M. [Dpto. de Geologia, Universidad de Oviedo, E-30005 Oviedo (Spain); Lagoyannis, A.; Harissopulos, S. [Tandem Accelerator Laboratory, Institute of Nuclear Physics, NCSR ' Demokritos' , GR-15310 Attiki (Greece)

    2010-07-15

    Sorption processes on mineral surfaces are a critical factor in controlling the distribution and accumulation of potentially harmful metals in the environment. This work investigates the effectiveness of gypsum (CaSO{sub 4}.2H{sub 2}O) to sequester Pb. The interaction of gypsum fragments with Pb-bearing solutions (10, 100 and 1000 mg/L) was monitored by performing macroscopic batch-type experiments conducted at room temperature. The aqueous phase composition was periodically determined by Atomic Absorption Spectrometry (AAS), Ion Chromatography (IC) and Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Regardless of the [Pb{sub aq}]{sub initial}, a [Pb{sub aq}]{sub final} < 4 mg/L was always reached. The uptake process was fast (t < 1 h) for [Pb{sub aq}]{sub initial} {>=} 100 mg/L and significantly slower (t > 1 week) for [Pb{sub aq}]{sub initial} = 10 mg/L. Speciation calculations revealed that after a long time of interaction (1 month), all the solutions reached equilibrium with respect to both gypsum and anglesite. For [Pb{sub aq}]{sub initial} {>=} 100 mg/L, sorption takes place mainly via the rapid dissolution of gypsum and the simultaneous formation of anglesite both on the gypsum surface and in the bulk solution. In the case of [Pb{sub aq}]{sub initial} = 10 mg/L, no anglesite precipitation was observed, but surface spectroscopy (proton Rutherford Backscattering Spectroscopy, p-RBS) confirmed the formation of Pb-bearing surface layers on the (0 1 0) gypsum surface in this case also. This study shows that the surface of gypsum can play an important role in the attenuation of Pb in contaminated waters.

  6. [Aqueous iodine solutions as disinfectants: composition, stability, comparison with chlorine and bromine solution (author's transl)].

    Science.gov (United States)

    Gottardi, W

    1978-09-01

    The equilibrium concentrations of aqueous iodine solutions in dependence of the total concentration and the pH-value have been calculated with and without regard of the iodate formation. The values obtained by the latter methode enabled by application of the known rate law to calculate the initial rate of the iodate formation and to draw from this conclusions concerning the stability of iodine solutions. On the grounds of these calculations to aqueous iodine solutions in the concentration and pH-range which is relevant for disinfection (greater than 10(-5) M/l, pH 6--9) one can attribute a stability sufficient for the use in practice and - unlike chlorine and bromine solutions - a content of bactericidal "free halogene" which is higher and independent of the pH-value. The disinfecting action of the iodine cation (H2O+J) which is supposed to be very powerful can be neglected because of its low concentration (10(-3)--10(-6%) of the total concentration). Hypoiodic acid which has already been converted into iodate by disproportionation is as good as lost for the disinfection because of the extremely slow reverse reaction.

  7. Improved phenol adsorption from aqueous solution using electrically conducting adsorbents

    Energy Technology Data Exchange (ETDEWEB)

    Asghar, Hafiz Muhammad Anwaar; Hussain, Syed Nadir [The University of Manchester, Manchester (United Kingdom); Sattar, Hamed [University of Leeds, Leeds (United Kingdom); Brown, Nigel Willis [Daresbury Innovation Centre, Cheshire (United Kingdom); Roberts, Edward Pelham Lindfield [University of Calgary, Calgary (Canada)

    2014-05-15

    The electrically conducting and partially porous graphite based adsorbent (called Nyex{sup TM} 2000) was tested for its adsorption capacity and electrochemical regeneration ability for the removal of phenol from aqueous solution. Nyex{sup TM} 2000 was tested in comparison with Nyex{sup TM} 1000, which is currently being used for a number of industrial waste water treatment applications. Nyex{sup TM} 1000 exhibited small adsorption capacity of 0.1 mg g{sup -1} for phenol because of having small specific surface area of 1 m{sup 2} g{sup -1}. In contrast, Nyex{sup TM} 2000 with specific surface area of 17 m{sup 2} g{sup -1} delivered an adsorption capacity of 0.8 mg g{sup -1}, which was eight-fold higher than that of Nyex{sup TM} 1000. Nyex{sup TM} 2000 was successfully electrochemically regenerated by passing a current of 0.5 A, charge passed of 31 C g{sup -1} for a treatment time of 45 minutes. These electrochemical parameters were comparable to Nyex{sup TM} 1000 for which a current of 0.5 A, charge passed of 5 C g{sup -1} for a treatment time of 20 minutes were applied for complete oxidation of adsorbed phenol. The comparatively high charge density was found to be required for Nyex{sup TM} 2000, which is justified with its higher adsorption capacity. The FTIR results validated the mineralization of adsorbed phenol into CO{sub 2} and H{sub 2}O except the formation of few by-products, which were in traces when compared with the concentration of phenol removed from aqueous solution. The electrical energy as required for electrochemical oxidation of phenol adsorbed onto Nyex{sup TM} 1000 and 2000 was found to be 214 and 196 J mg{sup -1}, respectively. The comparatively low energy requirement for electrochemical oxidation using Nyex{sup TM} 2000 is consistent with its higher bed electrical conductivity, which is twice that of Nyex{sup TM} 1000.

  8. The photochemical decomposition of Indol in an aqueous solution; Descomposicion fotoquimica de Indol en solucion acuosa

    Energy Technology Data Exchange (ETDEWEB)

    Ibarz, A.; Tejero, J.M.; Panades, R.

    1998-06-01

    The photo decomposition of Indol at different pH has been studied. The Indol photo decomposition rate in aqueous solution a maximum at pH 10. By means of a simple mechanism in three steps, it is possible to explain the kinetics behavior of the Indol photo decomposition in aqueous solution. (Author) 6 refs.

  9. Formation of quasi-free and bubble positronium states in water and aqueous solutions

    CERN Document Server

    Stepanov, Serge V; Byakov, Vsevolod M; Zvezhinskiy, D S; Subrahmanyam, V S

    2013-01-01

    It is shown that in aqueous solutions a positronium atom is first formed in the quasi-free state, and, after 50-100 ps, becomes localized in a nanobubble. Analysis of the annihilation spectra of NaNO3 aqueous solutions shows that the hydrated electron is not involved in the positronium (Ps) formation.

  10. A study on the reaction between CO2 and alkanolamines in aqueous solutions

    NARCIS (Netherlands)

    Blauwhoff, P.M.M.; Versteeg, G.F.; Swaaij, W.P.M. van

    1983-01-01

    Literature data on the rates of reaction between CO2 and alkanolamines (MEA, DEA, DIPA, TEA and MDEA) in aqueous solution are discussed. These data induced us to carry out absorption experiments of CO2 into aqueous DEA, DIPA, TEA and MDEA solutions from which the respective rate constants were deriv

  11. A study on the reaction between CO2 and alkanolamines in aqueous solutions

    NARCIS (Netherlands)

    Blauwhoff, P.M.M.; Versteeg, G.F.; Swaaij, W.P.M. van

    1984-01-01

    Literature data on the rates of reaction between CO2 and alkanolamines (MEA, DEA, DIPA, TEA and MDEA) in aqueous solution are discussed. These data induced us to carry out absorption experiments of CO2 into aqueous DEA, DIPA, TEA and MDEA solutions from which the respective rate constants were deriv

  12. Density, Viscosity, Solubility, and Diffusivity of N2O in Aqueous Amino Acid Salt Solutions

    NARCIS (Netherlands)

    Kumar, P. Senthil; Hogendoorn, J.A.; Feron, P.H.M.; Versteeg, G.F.

    2001-01-01

    Solubility and diffusivity of N2O in aqueous solutions of potassium taurate are reported over a wide range of concentration and temperature. Also, the solubility of N2O in aqueous potassium glycinate solution is reported at 295 K. The ion specific constants are reported for taurate and glycinate ani

  13. In Situ Structural Characterization of Ferric Iron Dimers in Aqueous Solutions

    DEFF Research Database (Denmark)

    Zhu, Mengqiang; Puls, Brendan W.; Frandsen, Cathrine

    2013-01-01

    The structure of ferric iron (Fe3+) dimers in aqueous solutions has long been debated. In this work, we have determined the dimer structure in situ in aqueous solutions using extended X-ray absorption fine structure (EXAFS) spectroscopy. An Fe K-edge EXAFS analysis of 0.2 M ferric nitrate solutio...

  14. Optical properties of chitosan in aqueous solution of L- and D-ascorbic acids

    Science.gov (United States)

    Malinkina, Olga N.; Shipovskaya, Anna B.; Kazmicheva, Olga F.

    2016-04-01

    The optical properties of aqueous chitosan solutions in L- and D-ascorbic acids were studied by optical rotatory dispersion and spectrophotometry. The specific optical rotation [α] of all chitosan solutions tested was positive, in contrast to aqueous solutions of the ascorbic acid enantiomers, which exhibit an inverse relationship of [α] values. Significant differences in the absolute values of [α] of the chitosan solutions at polymer-acid ratios exceeding the equimolar one were found.

  15. Development of an extraction system for the separation of dubnium from rutherfordium using MIBK and HCl/HF solutions

    Energy Technology Data Exchange (ETDEWEB)

    Schumann, Dorothea; Dressler, Rugard [Paul Scherrer Institut (PSI), Villigen (Switzerland)

    2016-04-01

    A chemical separation system was developed to separate group 4 and 5 elements using extraction from HCl/HF solution into methyl-isobutyl-ketone (MIBK). The system is proposed to be applied for a confident assignment of the spontaneous fissioning radionuclide produced as decay product of element 115 either as dubnium (Db, Z = 105) or rutherfordium (Rf, Z = 104). Moreover, extraction systems are proposed allowing the investigation of chemical properties of Db in comparison to the properties of its lighter homologs Nb and Ta.

  16. Effect of hydrofluoric acid (HF) concentration to pores size diameter of silicon membrane.

    Science.gov (United States)

    Burham, Norhafizah; Hamzah, Azrul Azlan; Majlis, Burhanuddin Yeop

    2014-01-01

    This paper studies parameters which affect the pore size diameter of a silicon membrane. Electrochemical etching is performed in characterise the parameter involved in this process. The parameter has been studied is volume ratio of hydrofluoric acid (HF) and ethanol as an electrolyte aqueous for electrochemical etch. This electrolyte aqueous solution has been mixed between HF and ethanol with volume ratio 3:7, 5:5, 7:3 and 9:1. As a result, the higher volume of HF in this electrolyte gives the smallest pore size diameter compared to the lower volume of HF. These samples have been dipped into HF and ethanol electrolyte aqueous with supplied 25 mA/cm2 current density for 20, 30, 40, and 50 minutes. The samples will inspect under Scanning Electron Microscope (SEM) to execute the pore formations on silicon membrane surface.

  17. Morphology control of brushite prepared by aqueous solution synthesis

    Directory of Open Access Journals (Sweden)

    T. Toshima

    2014-03-01

    Full Text Available Dicalcium phosphate dihydrate (DCPD, CaHPO4·2H2O, also known as brushite, is one of the important bioceramics due to not only diseases factors such as kidney stone and plaque formation but also purpose as fluoride insolubilization material. It is used medicinally to supply calcium, and is of interest for its unique properties in biological and pathological mineralization. It is important to control the crystal morphology of brushite since its chemical reactivity depends strongly on its surface properties; thus, its morphology is a key issue for its applications as a functional material or precursor for other bioceramics. Here, we report the effects of the initial pH and the Ca and phosphate ion concentrations on the morphology of DCPD particles during aqueous solution synthesis. Crystal morphologies were analyzed by scanning electron microscopy and X-ray diffraction. The morphology phase diagram of DCPD crystallization revealed that increasing the initial pH and/or ion concentration transformed DCPD morphology from petal-like into plate-like structures.

  18. Removal of nitrate and phosphate from aqueous solutions by microalgae

    Directory of Open Access Journals (Sweden)

    M.H. Sayadi

    2016-12-01

    Full Text Available The aim of this study was to evaluate the ability of microalgae Spirulina platensis and Chlorella vulgaris to remove nitrate and phosphate in aqueous solutions. Spirulina platensis and Chlorella vulgar is microalgae was collected in 1000 ml of municipal water and KNO3, K2HPO4 was added as sources of nitrate and phosphate in three different concentrations (0.25, 0.35 and 0.45g/L. During the growth period, the concentration of nitrate and phosphate was recorded at 1, 4, 6 and 8 days. The highest nitrate removal on the 8 day for Chlorella vulgaris was 89.80% at the treatment of 0.25g/L and for Spirulina platensis was 81.49% at the treatment of 0.25g/L. The highest phosphate removal for Spirulina platensis was 81.49% at the treatment of 0.45g/L and for Chlorella vulgaris was 88% at the treatment of 0.45g/L. The statistical results showed that the amount of phosphate and nitrate removal during different time periods by Chlorella vulgaris depicted a significant difference at P

  19. Lifetimes of -halo and -azidobenzyl carbocations in aqueous solution

    Indian Academy of Sciences (India)

    R Sanjeev; V Jagannadham

    2002-02-01

    The title cations were produced in aqueous solution by chemical initiation (solvolysis) of benzyl-gem-dihalides and benzyl-gem-diazides. The solvolysis reactions of benzyl-gem-dihalides and benzyl-gem-diazides in water proceed by a stepwise mechanism through -halobenzyl carbocation and -azidobenzyl carbocation intermediates, which are captured by water to give the corresponding carbonyl compounds as the sole detectable products. Rate constant ratio / (M-1) for partitioning of the carbocation between reaction with halide/azide ion and reaction with water is determined by analysis of halide/azide common ion inhibition of the solvolysis reaction. The rate constants (s-1) for the reaction of the cation with solvent water were determined from the experimental values of / and solv, for the solvolysis of the benzyl-gem-dihalides and benzyl-gem-diazides respectively, using = 5 × 109 M-1 s-1 for diffusion-limited reaction of halide/azide ion with -substituted benzyl carbocations. The values of 1/ are thus the lifetimes of the -halobenzyl carbocations and -azidobenzyl carbocations respectively.

  20. Defluoridation from aqueous solutions by granular ferric hydroxide (GFH).

    Science.gov (United States)

    Kumar, Eva; Bhatnagar, Amit; Ji, Minkyu; Jung, Woosik; Lee, Sang-Hun; Kim, Sun-Joon; Lee, Giehyeon; Song, Hocheol; Choi, Jae-Young; Yang, Jung-Seok; Jeon, Byong-Hun

    2009-02-01

    This research was undertaken to evaluate the feasibility of granular ferric hydroxide (GFH) for fluoride removal from aqueous solutions. Batch experiments were performed to study the influence of various experimental parameters such as contact time (1 min-24h), initial fluoride concentration (1-100 mgL(-1)), temperature (10 and 25 degrees C), pH (3-12) and the presence of competing anions on the adsorption of fluoride on GFH. Kinetic data revealed that the uptake rate of fluoride was rapid in the beginning and 95% adsorption was completed within 10 min and equilibrium was achieved within 60 min. The sorption process was well explained with pseudo-first-order and pore diffusion models. The maximum adsorption capacity of GFH for fluoride removal was 7.0 mgg(-1). The adsorption was found to be an endothermic process and data conform to Langmuir model. The optimum fluoride removal was observed between pH ranges of 4-8. The fluoride adsorption was decreased in the presence of phosphate followed by carbonate and sulphate. Results from this study demonstrated potential utility of GFH that could be developed into a viable technology for fluoride removal from drinking water.

  1. Ethylbenzene Removal by Carbon Nanotubes from Aqueous Solution

    Directory of Open Access Journals (Sweden)

    Bijan Bina

    2012-01-01

    Full Text Available The removal of ethylbenzene (E from aqueous solution by multiwalled, single-walled, and hybrid carbon nanotubes (MWCNTs, SWCNTs, and HCNTs was evaluated for a nanomaterial dose of 1 g/L, concentration of 10–100 mg/L, and pH 7. The equilibrium amount removed by SWCNTs (E: 9.98 mg/g was higher than by MWCNTs and HCNTs. Ethylbenzene has a higher adsorption tendency on CNTs, so that more than 98% of it adsorbed in first 14 min, which is related to the low water solubility and the high molecular weight. The SWCNTs performed better for ethylbenzene sorption than the HCNTs and MWCNTs. Isotherms study indicates that the BET isotherm expression provides the best fit for ethylbenzene sorption by SWCNTs. Carbon nanotubes, specially SWCNTs, are efficient and rapid adsorbents for ethylbenzene which possess good potential applications to maintain high-quality water. Therefore, it could be used for cleaning up environmental pollution to prevent ethylbenzene borne diseases.

  2. Photo- and thermal degradation of piroxicam in aqueous solution

    Directory of Open Access Journals (Sweden)

    M Aminuddin

    2011-01-01

    Full Text Available Light and temperature have considerable effect on the degradation of piroxicam in aqueous solutions. The pH and acetate buffer ions also affect the degradation process. The apparent first-order rate constants for the photochemical and thermal degradation of piroxicam have been determined as 2.04-10.01 and 0.86-3.06×10−3 min−1 , respectively. The first-order plots for the degradation of piroxicam showed good linearity within a range of 20-50% loss of piroxicam at pH 2.0-12.0. The rate-pH profile for the photodegradation of piroxicam is a U-shaped curve and for the thermal degradation a bell-shaped curve in the pH range of 2.0-12.0. The thermal degradation of piroxicam was maximum around pH 6.0. It is increased in the presence of acetate ions but was not affected by citrate and phosphate ions.

  3. Nonlinear optical properties of sodium copper chlorophyllin in aqueous solution.

    Science.gov (United States)

    Li, Jiangting; Peng, Yufeng; Han, Xueyun; Guo, Shaoshuai; Liang, Kunning; Zhang, Minggao

    2017-06-16

    Sodium copper chlorophyllin (SCC), as one of the derivatives of chlorophyll - with its inherent green features; good stability for heat, light, acids and alkalies; unique antimicrobial capability; and particular deodori zation performance - is widely applied in some fields such as the food industry, medicine and health care, daily cosmetic industry etc. SCC, as one of the metal porphyrins, has attracted much attention because of its unique electronic band structure and photon conversion performance. To promote the application of SCC in materials science; energy research and photonics, such as fast optical communications; and its use in nonlinear optical materials, solar photovoltaic cells, all-optical switches, optical limiters and saturable absorbers, great efforts should be dedicated to studying its nonlinear optical (NLO) properties. In this study, the absorption spectra and NLO properties of SCC in aqueous solution at different concentrations were measured. The Z-scan technique was used to determine NLO properties. The results indicated that the absorption spectra of SCC exhibit 2 characteristic absorption peaks located at the wavelengths 405 and 630 nm, and the values of the peaks increase with increasing SCC concentration. The results also showed that SCC exhibits reverse saturation absorption and negative nonlinear refraction (self-defocusing). It can be seen that SCC has good optical nonlinearity which will be convenient for applications in materials science, energy research and photonics.

  4. ADSORPTION FROM AQUEOUS SOLUTION ONTO NATURAL AND ACID ACTIVATED BENTONITE

    Directory of Open Access Journals (Sweden)

    Laila Al-Khatib

    2012-01-01

    Full Text Available Dyes have long been used in dyeing, paper and pulp, textiles, plastics, leather, paint, cosmetics and food industries. Nowadays, more than 100,000 commercial dyes are available with a total production of 700,000 tones manufactured all over the world annually. About 10-15% of dyes are being disposed off as a waste into the environment after dyeing process. This poses certain hazards and environmental problems. The objective of this study is to investigate the adsorption behavior of Methylene Blue (MB from aqueous solution onto natural and acid activated Jordanian bentonite. Both bentonites are firstly characterized using XRD, FTIR and SEM techniques. Then batch adsorption experiments were conducted to investigate the effect of initial MB concentration, contact time, pH and temperature. It was found that the percentage of dye removal was improved from 75.8% for natural bentonite to reach 99.6% for acid treated bentonite. The rate of MB removal followed the pseudo second order model with a high correlation factor. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms. The Langmuir isotherm model was found more representative. The results indicate that bentonite could be employed as a low cost adsorbent in wastewater treatment for the removal of colour and dyes.

  5. Effect of nanotechnology on heavy metal removal from aqueous solution

    Institute of Scientific and Technical Information of China (English)

    Hoda Kahrizi; Ali Bafkar; Masumeh Farasati

    2016-01-01

    The effect of nanotechnology on cadmium and zinc removal from aqueous solution was investigated. In order to characterize micro and nano phragmites australis adsorbent, we analyzed the data via FTIR, SEM, PSA, and EDX. The effect of various parameters such as pH, contact time, amount of adsorbent and initial concentration, was investigated. The optimum pH for the removal of cadmium for micro and nano phragmites australis adsorbent was 7, and for the removal of zinc by the micro adsorbent was 7 and by nano adsorbent was 6. The equilibrium time of zinc was 90 min and for the adsorption of cadmium by micro and nano adsorbent were 90 and 30 min, respectively. The optimum dose of micro adsorbent for the removal of cadmium was 0.7 g, and the other dose for the removal of zinc and cadmium was 0.5 g. The evaluation of adsorbent’s distribution coefficient showed that the highest rates of distribution coefficient with initial concentration of 5, 10, 30, and 50 mg/L were 394.83, 587.62, 759.39 and 1101.52 L/kg, respectively, which were observed in nano adsorbent. Desorption experiments for the nano adsorbent in three cycles were done. Among kinetics models, our experimental data were more consistent with Hoo kinetic model and for isotherm models, Freundlich isotherm was more consistent. The results show that nanotechnology could increase the performance of adsorbents and enhance the efficiency of the adsorption of cadmium and zinc ions.

  6. SORPTION OF Cu2+ FROM AQUEOUS SOLUTIONS BY SLOVAK BENTONITES

    Directory of Open Access Journals (Sweden)

    ANNA BRTÁŇOVÁ

    2012-03-01

    Full Text Available Bentonites are used as barriers in landfills, or in areas of old mining activities to prevent contamination of environment by leachates containing heavy metals. Batch experiments were performed under static conditions to study sorption of Cu2+ from aqueous solutions via adsorption on industrial products made from Slovak bentonites Lieskovec and Jelšový Potok. The samples were characterized by X-ray powder diffraction, infrared spectroscopy and by specific surface area and cation exchange capacities measurements. Effects of pH, concentration of metal cations and contact time were analysed. The adsorption was strongly dependent on pH of the medium, and the uptake of adsorbed metal increased from pH 2.0 to 6.5, while the solubility of Cu at higher pH values decreased. The uptake of Cu2+ was rapid and it increased with increasing metal concentration, while the relative amount of adsorbed Cu2+ decreased. The equilibrium adsorption capacity of the adsorbents used for Cu2+ was extrapolated using the linear Freundlich and Langmuir adsorption isotherms. The Langmuir isotherm was found to fit better the experimental data measured for both bentonites.

  7. Modeling platinum group metal complexes in aqueous solution.

    Science.gov (United States)

    Lienke, A; Klatt, G; Robinson, D J; Koch, K R; Naidoo, K J

    2001-05-07

    We construct force fields suited for the study of three platinum group metals (PGM) as chloranions in aqueous solution from quantum chemical computations and report experimental data. Density functional theory (DFT) using the local density approximation (LDA), as well as extended basis sets that incorporate relativistic corrections for the transition metal atoms, has been used to obtain equilibrium geometries, harmonic vibrational frequencies, and atomic charges for the complexes. We found that DFT calculations of [PtCl(6)](2-).3H(2)O, [PdCl(4)](2-).2H(2)O, and [RhCl(6)](3-).3H(2)O water clusters compared well with molecular mechanics (MM) calculations using the specific force field developed here. The force field performed equally well in condensed phase simulations. A 500 ps molecular dynamics (MD) simulation of [PtCl(6)](2-) in water was used to study the structure of the solvation shell around the anion. The resulting data were compared to an experimental radial distribution function derived from X-ray diffraction experiments. We found the calculated pair correlation functions (PCF) for hexachloroplatinate to be in good agreement with experiment and were able to use the simulation results to identify and resolve two water-anion peaks in the experimental spectrum.

  8. Cadmium Removal from Aqueous Solutions by Ground Pine Cone

    Directory of Open Access Journals (Sweden)

    H Izanloo, S Nasseri

    2005-01-01

    Full Text Available A study on the removal of cadmium ions from aqueous solutions by pine cone was conducted in batch conditions. Kinetic data and equilibrium removal isotherms were obtained. The influence of different experimental parameters such as contact time, initial concentration of cadmium, pine cone mass and particle size, and temperature on the kinetics of cadmium removal was studied. Results showed that the main parameters that played an important role in removal phenomenon were initial cadmium concentration, particle size and pine cone mass. The necessary time to reach equilibrium was between 4 and 7 hours based on the initial concentration of cadmium. The capacity of cadmium adsorption at equilibrium increased with the decrease of pine cone particle size. The capacity of cadmium adsorption at equilibrium by pine cone increased with the quantity of pine cone introduced (1–4 g/L. Temperature in the range of 20-30°C showed a restricted effect on the removal kinetics (13.56 mg/g at 20°C and a low capacity of adsorption about 11.48 mg/g at 30°C. The process followed pseudo second-order kinetics. The cadmium uptake of pine cone was quantitatively evaluated using adsorption isotherms. Results indicated that the Langmuir model gave a better fit to the experimental data in comparison with the Freundlich equation.

  9. Adsorption removal of thiocyanate from aqueous solution by calcined hydrotalcite

    Institute of Scientific and Technical Information of China (English)

    LI Yu-jiang; YANG Min; ZHANG Xiao-jin; WU Tao; CAO Nan; WEI Na; BI Yan-jun; WANG Jing

    2006-01-01

    A hydrotalcite with Mg/Al molar ratio 2 was prepared by co-precipitation method and was characterized by XRD,TG/DTA, Zeta potential and BET surface area. The hydrotalcite was calcined at 500℃, with the dehydration from interlayer, the dehydroxilation from the brucite-like layer and the decomposition of carbonate successively, transformed into the mixed oxide type.The removal of thiocyanate from aqueous solution by using the original hydrotalcite and calcined hydrotalcite (HTC-500) was investigated. The results showed that the thiocyanate adsorption capacity of calcined hydrotalcite was much higher than that of the original form. Calcined hydrotalcite was particularly effective at removing thiocyanate, and that the effective range of pH for the thiocyanate removal are between 5.5-10.0. The experimental data of thiocyanate removal fit nicely with Langmuir isotherm, and the saturated adsorption uptake was 96.2 mg SCN-/g HTC-500. The adsorption ofthiocyanate by calcined hydrotalcite follows first-order kinetics. And the intercalation to the structure recovery for calcined hydrotalcite. But the presence of additional anions could affect the adsorption behavior of thiocyanate.

  10. Adsorption removal of thiocyanate from aqueous solution by calcined hydrotalcite.

    Science.gov (United States)

    Li, Yu-Jiang; Yang, Min; Zhang, Xiao-Jin; Wu, Tao; Cao, Nan; Wei, Na; Bi, Yan-Jun; Wang, Jing

    2006-01-01

    A hydrotalcite with Mg/Al molar ratio 2 was prepared by co-precipitation method and was characterized by XRD, TG/DTA, Zeta potential and BET surface area. The hydrotalcite was calcined at 500 degrees C, with the dehydration from interlayer, the dehydroxilation from the brucite-like layer and the decomposition of carbonate successively, transformed into the mixed oxide type. The removal of thiocyanate from aqueous solution by using the original hydrotalcite and calcined hydrotalcite (HTC-500) was investigated. The results showed that the thiocyanate adsorption capacity of calcined hydrotalcite was much higher than that of the original form. Calcined hydrotalcite was particularly effective at removing thiocyanate, and that the effective range of pH for the thiocyanate removal are between 5.5-10.0. The experimental data of thiocyanate removal fit nicely with Langmuir isotherm, and the saturated adsorption uptake was 96.2 mg SCN-/g HTC-500. The adsorption of thiocyanate by calcined hydrotalcite follows first-order kinetics. And the intercalation to the structure recovery for calcined hydrotalcite. But the presence of additional anions could affect the adsorption behavior of thiocyanate.

  11. Adsorption of dimethylamine from aqueous solution by manganese dioxide.

    Science.gov (United States)

    Yang, L; Chen, Z; Zhang, D; Liu, Y; Han, Y; Shen, J

    2011-01-01

    Removal of precursors of N-nitrosodimethylamine (NDMA), such as the most direct precursor dimethylamine (DMA), might be an effective method to control NDMA formation during practical water treatment process. Adsorption of DMA onto manganese dioxide (MnO₂) from aqueous solution has been investigated using batch experiments in this study. Results indicate that DMA adsorption is initially rapid (in the first 5 h) and the adsorption process reaches a steady state after 15 h. The adsorption isotherms are well described by the Freundlich models. The desorption shows an irreversibility of DMA adsorption onto MnO₂. The effects of temperature, pH, ionic strength, humic acid, and the presence of other secondary aliphatic amines on adsorption processes are also examined. According to the experimental results, the amount of DMA adsorbed increases with an increase of temperature from 288 to 308 K, and with a decrease of ionic strength from 1 to 10 mM. The maximum adsorption appeared at pH 7.0. However, the amount of DMA adsorbed onto MnO₂ does not show obvious difference in the presence of humic acid. According to the results, it suggests that the adsorption is primarily brought about by electrostatic interaction between DMA and MnO₂ surface.

  12. Electrochemical degradation of amaranth aqueous solution on ACF.

    Science.gov (United States)

    Fan, Li; Zhou, Yanwei; Yang, Weishen; Chen, Guohua; Yang, Fenglin

    2006-09-21

    The degradation of Amaranth, a kind of azo dye, has been studied under galvanostatic model with activated carbon fiber (ACF) electrode in aqueous solution with electrochemical method. The ACF was used as anode and cathode, respectively for the decolorization process. The onset oxidation potential and reduction potential for Amaranth on ACF were respectively ascertained at 0.6 and -0.4 V. During the range of -1.1 to 0.50 mA cm(-2), the decolorization was clarified into three processes as electroreduction, adsorption and electrooxidation. There were little contributions to the color and COD removals for the process of adsorption. The color removal can be up to 99% when the current density was 0.50 mA cm(-2). The maximum COD removal was 52% for the process of electrooxidation. Hundred percent color removal was obtained when the current density of -1.0 mA cm(-2) was applied. The maximum COD removal was 62% for the electroreduction. The COD removal results from the adsorption of products for the decolorization process of electrooxidation or electroreduction.

  13. Batch liquid-liquid extraction of phenol from aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Palma, M.S.A.; Shibata, C. [Department of Biochemical Pharmaceutical Technology, Faculty of Pharmaceutical Sciences, University of Sao Paulo, Sao Paulo-SP (Brazil); Paiva, J.L. [Department of Chemical Engineering, Polytechnical School, University of Sao Paulo, Sao Paulo-SP (Brazil); Zilli, M. [Department of Chemical and Process Engineering, University of Genoa, Genoa (Italy); Converti, A.

    2010-01-15

    The aim of this work is the study of batch liquid-liquid extraction of phenol from aqueous solutions in a bench-scale well-mixed reactor. The influence of the ratio of phase volumes, temperature, and rotational speed on phenol removal (0.72-1.1 % w/w) was investigated using methyl isobutyl ketone as an extracting solvent. For this purpose, the ratio of phase volumes were set at 0.1 and 0.2, the temperature at 10, 20, and 30 C, and the rotational speed at 300, 400, and 500 rpm. A physical model based on the material balance of the phases as well as the equation of mass flux between the phases allowed the estimation of the overall coefficient of mass transfer coupled with the superficial area. Moreover, it proved to fit, satisfactorily well, the experimental data of residual phenol concentration in the organic phase versus time under all the conditions investigated. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  14. Structure of aqueous electrolyte solutions near a hydrophobic surface

    Directory of Open Access Journals (Sweden)

    M.Kinoshita

    2007-09-01

    Full Text Available The structure of aqueous solutions of 1:1 salts (KCl, NaCl, KF,and CsI near a hydrophobic surface is analysed using the angle-dependent integral equation theory. Water molecules are taken to be hard spheres imbedded with multipolar moments including terms up to octupole order, and hard spherical ions are immersed in this model water. The many-body interactions associated with molecular polarizability are treated at the self-consistent mean field level. The effects of cationic and anionic sizes and salt concentration in the bulk are discussed in detail. As the salt concentration increases, the layer of water molecules next to the surface becomes denser but its orientational order remains almost unchanged. The concentration of each ion at the surface can be drastically different from that in the bulk. Asa striking example, at sufficiently low salt concentrations, the concentration of I- is about 500 times higher than that of F- at the surface.

  15. Sonochemical degradation of organophosphorus pesticide in dilute aqueous solutions

    Institute of Scientific and Technical Information of China (English)

    Robina Farooq; FENG Kai-lin; S. F. Shaukat; HUANG Jian-jun

    2003-01-01

    Ultrasonic irradiation was found to accelerate the rate of hydrolysis of omethoate in aqueous solution over the pH range of 2-12. Process parameters studied include pH, steady-state temperature, concentration, and the type of gases. Greater than 96% hydrolysis was observed in 30 minutes through this process and the rate of destruction increased with the help of more soluble and low thermal inert gas. So with Krypton, omethoate was found to undergo rapid destruction as compared with Argon. In the presence of ultrasound, the observed first-order rate of hydrolysis of omethoate is found to be independent of pH. The formation of transient supercritical water(SCW) appears to be an important factor in the acceleration of chemical reactions in the presence of ultrasound. A detailed chemical reaction mechanism for omethoate destruction in water was formulated. Experimental results and theoretical kinetic mechanism demonstrated that the most of the omethoate undergo destruction inside the cavitating holes. A very less effect of temperature on the degradation of omethoate within a temperature range of 20-70℃ proves that a small quantity of omethoate undergoes secondary destruction in the bulk liquid.

  16. The evaporation behavior of sessile droplets from aqueous saline solutions.

    Science.gov (United States)

    Soulié, Virginie; Karpitschka, Stefan; Lequien, Florence; Prené, Philippe; Zemb, Thomas; Moehwald, Helmuth; Riegler, Hans

    2015-09-14

    Quantitative experiments on the evaporation from sessile droplets of aqueous saline (NaCl) solutions show a strong dependence on salt concentration and droplet shape. The experiments were performed with seven decades of initial NaCl concentrations, with various droplet sizes and with different contact angles. The evaporation rate is significantly lower for high salt concentrations and small contact angles than what is expected from the well-accepted diffusion-controlled evaporation scenario for sessile droplets, even if the change of the vapor pressure due to the salt is taken into account. Particle tracking velocimetry reveals that this modification of the evaporation behavior is caused by marangoni flows that are induced by surface tension gradients originating from the local evaporative peripheral salt enrichment. In addition it is found that already very low salt concentrations lead to a pinning of the three phase contact line. Whereas droplets with concentration ≥10(-6) M NaCl are pinned as soon as evaporation starts, droplets with lower salt concentration do evaporate in a constant contact angle mode. Aside from new, fundamental insights the findings are also relevant for a better understanding of the widespread phenomenon of corrosion initiated by sessile droplets.

  17. [Reductive degradation of chlorophenols in aqueous solution by gamma irradiation].

    Science.gov (United States)

    Peng, Yun-Xia; He, Shi-Jun; Gong, Wen-Qi; Wang, Jian-Long

    2013-04-01

    Because chlorine is an electron withdrawing group, the highly chlorinated phenols may react quickly with hydrated electrons rather than with hydroxyl radicals. The process of reactions of four chlorophenols (4-CP, 2-CP, 2,4-DCP, 2,4,6-TCP) with e(aq)(-) was investigated in aqueous solutions by detecting the concentration of CPs, Cl- and intermediates. In the e(aq)(-) reductive system, the experimental results showed that the order of four kinds of chlorophenol degradation and dechlorination was 2,4,6-TCP > 2,4-DCP > 2-CP > 4-CP. The greater the chlorine content was the higher reactivity of hydrated electrons towards chlorophenols was. Furthermore, hydrated electrons may preferentially attack the ortho-position of chlorine atom rather than the para-position of chlorine atom. Phenol and Cl- were detected as the final product of the reductive reaction. Additionally, processes of degradation and dechlorination of CPs were observed as the pseudo-first-order kinetics. The reaction constant of degradation of 4-CP, 2-CP, 2,4-DCP and 2,4,6-TCP were 0.154, 0.253, 0.750 and 1.188 kGy(-1), respectively. Meanwhile, the dechlorination of 4-CP, 2-CP, 2,4-DCP and 2,4,6-TCP were 0.137, 0.219, 0.251 and 0.306 kGy(-1), respectively.

  18. Fenton Oxidation of Methyl Violet in Aqueous Solution

    Directory of Open Access Journals (Sweden)

    Saeedeh Hashemian

    2013-01-01

    Full Text Available In this study, oxidative discoloration of methyl violet (MV dye in aqueous solution has been studied using Fenton (Fe2+/H2O2 process. The parameters such as concentration of Fe2+, H2O2, MV, temperature, and Cl− and ions that affected of discoloration in Fenton process were investigated. The rate of degradation is dependent on initial concentration of Fe2+ ion, initial concentration of H2O2, and pH of media. Discoloration of MV was increased by increasing the temperature of reaction. Optimized condition was determined and it was found that the obtained efficiency was about 95.5% after 15 minutes of reaction at pH 3. TOC of dye sample, before and after the oxidation process, was determined. TOC removal indicates partial and significant mineralization of MV dye. The results of experiments showed that degradation of MV dye in Fenton oxidation can be described with a pseudo-irst-order kinetic model. The thermodynamic constants of the Fenton oxidation process were evaluated. The results implied that the oxidation process was feasible, spontaneous, and endothermic.

  19. Spreading of aqueous SDS solutions over nitrocellulose membranes.

    Science.gov (United States)

    Zhdanov, S A; Starov, V M; Sobolev, V D; Velarde, M G

    2003-08-15

    Experimental investigations were carried out on the spreading of small drops of aqueous SDS solutions over dry thin porous substrates (nitrocellulose membranes) in the case of partial wetting. The time evolution was monitored of the radii of both the drop base and the wetted area inside the porous substrate. The total duration of the spreading process was subdivided into three stages: the first stage: the drop base expands until the maximum value of the drop base is reached, the contact angle rapidly decreases during this stage; the second stage: the radius of the drop base remains constant and the contact angle decreases linearly with time; the third stage: the drop base shrinks and the contact angle remains constant. The wetted area inside the porous substrate expends during the whole spreading process. Appropriate scales were used with a plot of the dimensionless radii of the drop base, of the wetted area inside the porous substrate and the dynamic contact angle on the dimensionless time. Our experimental data show: the overall time of the spreading of drops of SDS solution over dry thin porous substrates decreases with the increase of surfactant concentration; the difference between advancing and hydrodynamic receding contact angles decreases with the surfactant concentration increase; the constancy of the contact angle during the third stage of spreading has nothing to do with the hysteresis of contact angle, but determined by the hydrodynamic reasons. It is shown using independent spreading experiments of the same drops on nonporous nitrocellulose substrate that the static receding contact angle is equal to zero, which supports our conclusion on the hydrodynamic nature of the hydrodynamic receding contact angle on porous substrates.

  20. Pulse radiolysis of butyl acrylate in aqueous solution

    Science.gov (United States)

    Kujawa, P.; Mohid, N.; Zaman, K.; Manshol, W.; Ulanski, P.; Rosiak, J. M.

    1998-10-01

    The pulse radiolysis of n-butyl acrylate (nBA) in aqueous solution was studied. The rate constant of the reaction of nBA with hydroxyl radicals was calculated as 1.5×10 10 dm 3 mol -1 s -1. The absorption spectrum of the OH ·-nBA adduct appeared to have a broad maximum at 300 nm. This spectrum was attributed to the α-carbon centred radicals. It decayed with the first-order rate constant k=1.5×10 4 s -1 (pH 10.8). The rate constant of the nBA reaction with hydrated electrons was determined as k=1.6×10 10 dm 3 mol -1 s -1. The spectrum of H ·-nBA adduct was similar to that recorded for OH · adduct. It decayed with first-order kinetics at k=1.0×10 4 s -1. Spectra of the electron adduct were characterised by the band with a maximum at 285 nm (pH 10.0) or at 280 nm (pH 4.0) with ɛ=10 500 dm 3 mol -1 cm -1. In acidic solution, radical anion formed upon addition of hydrated electrons to the nBA molecule, undergoes fast, reversible protonation. The decay of the reversibly protonated electron adduct was a second-order process at k=2.5×10 9 dm 3 mol -1 s -1. This reaction took place at the carbonyl oxygen. Slow, irreversible protonation of the electron adduct at high pH takes place at the β-carbon atom at k=2.9×10 4 s -1.

  1. Heavy metal removal from aqueous solutions by activated phosphate rock

    Energy Technology Data Exchange (ETDEWEB)

    Elouear, Z. [Laboratoire Eau Energie et Environnement, Departement de genie geologique, Ecole Nationale d' Ingenieurs de Sfax, BP W 3038, Sfax (Tunisia)], E-mail: zouheir.elouaer@tunet.tn; Bouzid, J.; Boujelben, N. [Laboratoire Eau Energie et Environnement, Departement de genie geologique, Ecole Nationale d' Ingenieurs de Sfax, BP W 3038, Sfax (Tunisia); Feki, M. [Unite de chimie industriel I, Ecole Nationale d' Ingenieurs de Sfax, BP W 3038 Sfax (Tunisia); Jamoussi, F. [Laboratoire de Georessources CERTE BP 95, 2050 Hamam-Lif (Tunisia); Montiel, A. [Societe Anonyme de Gestion des Eaux de Paris, 9 rue Schoelcher, 75675 Paris cedex 14 (France)

    2008-08-15

    The use of natural adsorbent such as phosphate rock to replace expensive imported synthetic adsorbent is particularly appropriate for developing countries such as Tunisia. In this study, the removal characteristics of lead, cadmium, copper and zinc ions from aqueous solution by activated phosphate rock were investigated under various operating variables like contact time, solution pH, initial metal concentration and temperature. The kinetic and the sorption process of these metal ions were compared for phosphate rock (PR) and activated phosphate rock (APR). To accomplish this objective we have: (a) characterized both (PR) and (APR) using different techniques (XRD, IR) and analyses (EDAX, BET-N{sub 2}); and, (b) qualified and quantified the interaction of Pb{sup 2+}, Cd{sup 2+}, Cu{sup 2+} and Zn{sup 2+} with these sorbents through batch experiments. Initial uptake of these metal ions increases with time up to 1 h for (PR) and 2 h for (APR), after then, it reaches equilibrium. The maximum sorption obtained for (PR) and (APR) is between pH 2 and 3 for Pb{sup 2+} and 4 and 6 for Cd{sup 2+}, Cu{sup 2+} and Zn{sup 2+}. The effect of temperature has been carried out at 10, 20 and 40 deg. C. The data obtained from sorption isotherms of metal ions at different temperatures fit to linear form of Langmuir sorption equation. The heat of sorption ({delta}H{sup o}), free energy ({delta}G{sup o}) and change in entropy ({delta}S{sup o}) were calculated. They show that sorption of Pb{sup 2+}, Cd{sup 2+}, Cu{sup 2+} and Zn{sup 2+}on (PR) and (APR) an endothermic process. These findings are significant for future using of (APR) for the removal of heavy metal ions from wastewater under realistic competitive conditions in terms of initial heavy metals, concentrations and pH.

  2. Reomoval of Heavy Metals from Aqueous Solutions using Bascteria

    Institute of Scientific and Technical Information of China (English)

    HUANGMin-sheng; PANjing; 等

    2001-01-01

    The accumulation of heavy metals by microbial biomass with high surface area-to-volume ratio holds great potential for heavy metal removal in both soluble and particular forms,especially when the heavy metal concentrations are low(<50mg/L),E.coli and B.Subtilis are effective agents for metal removal.We further investigated the effect of pH,temperature,equilibration time,and pre-treatment reagents on the removal of pH(Ⅱ),Cd(Ⅱ) and Cr(VI) from aqueous solutions by E.Coli and B.subtilis.E.coli and B.subtilis were cultivated for 60 hours,the experimentally determined optimal cultivation time before they were used in metal removal experiments,Under the optimal conditions of pH 6.0,equilibration temperature 30℃ and equilibration time 1 hour,63.39% and 69.90%Cd(Ⅱ) can be removed by E.coli and B.subtilis.Under the optimal conditions of pH5.5,equilibration temperature 30℃ and equliobration time 1 hour,68.51% and 67.36% pB(Ⅱ) can be removed by E.coli and B.subtilis.And under the optimal conditons of pH5.5,equilibration temperature 30℃,and equilibration time 1 hour,60.26% and 54.56% Cr(VI) can be removed by E.coli and B.subtilis.Chemical treatment of cultivated bacteria(0.1mol/L NaOH,0.1mol/L HCl,30% ethanol,and distilled water)affects the efficiency of metal removal by E.coli and B.subtilis,pretreatment of biomass by NaOH enhanced Cd(Ⅱ),Pb(Ⅱ)and Cr(VI) removal,while preteatment by HCl,ethanol and distilled water reduced Ca(Ⅱ) ,Pb(Ⅱ) and Cr(VI) removal,For metal removal from industrial waste discharges,pretreated biomass of E.coli can remove 68.5% of Cd and 58.1% of Cr from solutions,while pretreated biomass of B.subtilis can remove 62.6% of Cd and 57% of Cr from Solutions.

  3. "Structure-making" ability of Na+ in dilute aqueous solution: an ONIOM-XS MD simulation study.

    Science.gov (United States)

    Sripa, Pattrawan; Tongraar, Anan; Kerdcharoen, Teerakiat

    2013-02-28

    An ONIOM-XS MD simulation has been performed to characterize the "structure-making" ability of Na(+) in dilute aqueous solution. The region of most interest, i.e., a sphere that includes Na(+) and its surrounding water molecules, was treated at the HF level of accuracy using LANL2DZ and DZP basis sets for the ion and waters, respectively, whereas the rest of the system was described by classical pair potentials. Detailed analyzes of the ONIOM-XS MD trajectories clearly show that Na(+) is able to order the structure of waters in its surroundings, forming two prevalent Na(+)(H(2)O)(5) and Na(+)(H(2)O)(6) species. Interestingly, it is observed that these 5-fold and 6-fold coordinated complexes can convert back and forth with some degrees of flexibility, leading to frequent rearrangements of the Na(+) hydrates as well as numerous attempts of inner-shell water molecules to interchange with waters in the outer region. Such a phenomenon clearly demonstrates the weak "structure-making" ability of Na(+) in aqueous solution.

  4. Ion aggregation in high salt solutions. III. Computational vibrational spectroscopy of HDO in aqueous salt solutions

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jun-Ho; Lim, Sohee; Chon, Bonghwan; Cho, Minhaeng, E-mail: mcho@korea.ac.kr [Center for Molecular Spectroscopy and Dynamics, Institute for Basic Science, Seoul 136-713 (Korea, Republic of); Department of Chemistry, Korea University, Seoul 136-713 (Korea, Republic of); Kim, Heejae; Kim, Seongheun [Department of Chemistry, Korea University, Seoul 136-713 (Korea, Republic of)

    2015-05-28

    The vibrational frequency, frequency fluctuation dynamics, and transition dipole moment of the O—D stretch mode of HDO molecule in aqueous solutions are strongly dependent on its local electrostatic environment and hydrogen-bond network structure. Therefore, the time-resolved vibrational spectroscopy the O—D stretch mode has been particularly used to investigate specific ion effects on water structure. Despite prolonged efforts to understand the interplay of O—D vibrational dynamics with local water hydrogen-bond network and ion aggregate structures in high salt solutions, still there exists a gap between theory and experiment due to a lack of quantitative model for accurately describing O—D stretch frequency in high salt solutions. To fill this gap, we have performed numerical simulations of Raman scattering and IR absorption spectra of the O—D stretch mode of HDO in highly concentrated NaCl and KSCN solutions and compared them with experimental results. Carrying out extensive quantum chemistry calculations on not only water clusters but also ion-water clusters, we first developed a distributed vibrational solvatochromic charge model for the O—D stretch mode in aqueous salt solutions. Furthermore, the non-Condon effect on the vibrational transition dipole moment of the O—D stretch mode was fully taken into consideration with the charge response kernel that is non-local polarizability density. From the fluctuating O—D stretch mode frequencies and transition dipole vectors obtained from the molecular dynamics simulations, the O—D stretch Raman scattering and IR absorption spectra of HDO in salt solutions could be calculated. The polarization effect on the transition dipole vector of the O—D stretch mode is shown to be important and the asymmetric line shapes of the O—D stretch Raman scattering and IR absorption spectra of HDO especially in highly concentrated NaCl and KSCN solutions are in quantitative agreement with experimental results. We

  5. Ultrasound assisted enzymatic depolymerization of aqueous guar gum solution.

    Science.gov (United States)

    Prajapat, Amrutlal L; Subhedar, Preeti B; Gogate, Parag R

    2016-03-01

    The present work investigates the effectiveness of application of low intensity ultrasonic irradiation for the intensification of enzymatic depolymerization of aqueous guar gum solution. The extent of depolymerization of guar gum has been analyzed in terms of intrinsic viscosity reduction. The effect of ultrasonic irradiation on the kinetic and thermodynamic parameters related to the enzyme activity as well as the intrinsic viscosity reduction of guar gum using enzymatic approach has been evaluated. The kinetic rate constant has been found to increase with an increase in the temperature and cellulase loading. It has been observed that application of ultrasound not only enhances the extent of depolymerization but also reduces the time of depolymerization as compared to conventional enzymatic degradation technique. In the presence of cellulase enzyme, the maximum extent of depolymerization of guar gum has been observed at 60 W of ultrasonic rated power and ultrasonic treatment time of 30 min. The effect of ultrasound on the kinetic and thermodynamic parameters as well as the molecular structure of cellulase enzyme was evaluated with the help of the chemical reaction kinetics model and fluorescence spectroscopy. Application of ultrasound resulted in a reduction in the thermodynamic parameters of activation energy (Ea), enthalpy (ΔH), entropy (ΔS) and free energy (ΔG) by 47%, 50%, 65% and 1.97%, respectively. The changes in the chemical structure of guar gum treated using ultrasound assisted enzymatic approach in comparison to the native guar gum were also characterized by FTIR. The results revealed that enzymatic depolymerization of guar gum resulted in a polysaccharide with low degree of polymerization, viscosity and consistency index without any change in the core chemical structure which could make it useful for incorporation in food products.

  6. Mineralization of paracetamol in aqueous solution with advanced oxidation processes.

    Science.gov (United States)

    Torun, Murat; Gültekin, Özge; Şolpan, Dilek; Güven, Olgun

    2015-01-01

    Paracetamol is a common analgesic drug widely used in all regions of the world more than hundred tonnes per year and it poses a great problem for the aquatic environment. Its phenolic intermediates are classified as persistent organic pollutants and toxic for the environment as well as human beings. In the present study, the irradiation of aqueous solutions of paracetamol with 60Co gamma-rays was examined on a laboratory scale and its degradation path was suggested with detected radiolysis products. The synergic effect of ozone on gamma-irradiation was investigated by preliminary ozonation before irradiation which reduced the irradiation dose from 5 to 3 kGy to completely remove paracetamol and its toxic intermediate hydroquinone from 6 to 4 kGy as well as increasing the radiation chemical yield (Gi values 1.36 and 1.66 in the absence and presence of ozone, respectively). The observed amount of formed hydroquinone was also decreased in the presence of ozone. There is a decrease in pH from 6.4 to 5.2 and dissolved oxygen consumed, which is up to 0.8 mg l(-1), to form some peroxyl radicals used for oxidation. Analytical measurements were carried out with gas chromatography/mass spectrometry and ion chromatography (IC) both qualitatively and quantitatively. Amounts of paracetamol and hydroquinone were measured with gas chromatography after trimethylsilane derivatization. Small aliphatic acids, such as acetic acid, formic acid and oxalic acid, were measured quantitatively with IC as well as inorganic ions (nitrite and nitrate) in which their yields increase with irradiation.

  7. Method for Non-Invasive Determination of Chemical Properties of Aqueous Solutions

    Science.gov (United States)

    Todd, Paul W. (Inventor); Jones, Alan (Inventor); Thomas, Nathan A. (Inventor)

    2016-01-01

    A method for non-invasively determining a chemical property of an aqueous solution is provided. The method provides the steps of providing a colored solute having a light absorbance spectrum and transmitting light through the colored solute at two different wavelengths. The method further provides the steps of measuring light absorbance of the colored solute at the two different transmitted light wavelengths, and comparing the light absorbance of the colored solute at the two different wavelengths to determine a chemical property of an aqueous solution.

  8. Photocatalytic decomposition of cortisone acetate in aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Romão, Joana Sobral; Hamdy, Mohamed S.; Mul, Guido, E-mail: g.mul@utwente.nl; Baltrusaitis, Jonas, E-mail: j.baltrusaitis@utwente.nl

    2015-01-23

    Graphical abstract: - Highlights: • Most efficient photocatalysts for cortisone 21-acetate (CA) degradation were ZnO and TiO{sub 2} (P25). • The decomposition rate increased at low CA concentrations. • No pH dependence was observed allowing CA photocatalytic degradation at native pH. • Synergistic CA degradation effects between TiO{sub 2} and S{sub 2}O{sub 8}{sup 2−} were found. • LC–MS confirmed a decrease in CA concentration, but no intermediate products were detected. - Abstract: The photocatalytic decomposition of cortisone 21-acetate (CA), a model compound for the commonly used steroid, cortisone, was studied. CA was photocatalytically decomposed in a slurry reactor with the initial rates between 0.11 and 0.46 mg L{sup −1} min{sup −1} at 10 mg L{sup −1} concentration, using the following heterogeneous photocatalysts in decreasing order of their catalytic activity: ZnO > Evonik TiO{sub 2} P25 > Hombikat TiO{sub 2} > WO{sub 3}. Due to the lack of ZnO stability in aqueous solutions, TiO{sub 2} P25 was chosen for further experiments. The decomposition reaction was found to be pseudo-first order and the rate constant decreased as a function of increasing initial CA concentration. Changing the initial pH of the CA solution did not affect the reaction rate significantly. The decomposition reaction in the presence of the oxidizing sacrificial agent sodium persulfate showed an observed decomposition rate constant of 0.004 min{sup −1}, lower than that obtained for TiO{sub 2} P25 (0.040 min{sup −1}). The highest photocatalytic degradation rate constant was obtained combining both TiO{sub 2} P25 and S{sub 2}O{sub 8}{sup 2−} (0.071 min{sup −1}) showing a synergistic effect. No reactive intermediates were detected using LC–MS showing fast photocatalytic decomposition kinetics of CA.

  9. Thermodynamics of polyamide separation membrane in contact with aqueous solutions

    Science.gov (United States)

    Zhang, Xijing

    Composite reverse osmosis (RO) membranes, which are typically comprised of a polyamide active-layer that is formed by interfacial polymerization on a porous polysulfone support, are widely used in technologies for desalination and water purification. The water permeation and the rejection of salts or other contaminants are mainly determined by the transport properties of the polyamide active layer. Both the permeabilities of water and salt are described using solution-diffusion model and the mechanism of salt distribution in polyamide is distinguished into ion-exchange and ion partitioning. The ion partition coefficient κ in the active layer is a key thermodynamic parameter that partially controls the ability of the membrane to desalinate water. FT30 membranes are soaked in aqueous solutions of CsCl, KBr, or Na 2WO4, freeze-dried to remove water without disturbing ion distribution, and analyzed by Rutherford backscattering spectrometry. κ is calculated as ˜ 6 from the ion concentration in active layer measured using RBS and porosity in the polysulfone support layer is also derived as 40--50% from RBS data. Stress change induced by salt distribution is investigated with an optical system. Stress goes up to 9 MPa for transferred polyamide active layer from commercial RO membrane FT30 and 8 MPa for lab-synthesized polyamide film. The saturation in stress change is due to the pre-occupation of ions onto all the stress-related sites. The absorption of water in reverse osmosis membranes FT30 and LF10 is investigated by a combination of measurements of water mass uptake and biaxial stress as a function of relative humidity. Water solubility in polyamide active layer is 12 wt% at a relative humidity of 95%. The slope of a water concentration versus humidity curve can be used to calculate inter-diffusivity of water in polyamide active layers. By combining the measurements of water mass uptake and biaxial stress, we estimate the specific volume of water in the active

  10. Kinetics of the decomposition and the estimation of the stability of 10% aqueous and non-aqueous hydrogen peroxide solutions

    Directory of Open Access Journals (Sweden)

    Zun Maria

    2014-12-01

    Full Text Available In this study, the stability of 10% hydrogen peroxide aqueous and non-aqueous solutions with the addition of 6% (w/w of urea was evaluated. The solutions were stored at 20°C, 30°C and 40°C, and the decomposition of hydrogen peroxide proceeded according to first-order kinetics. With the addition of the urea in the solutions, the decomposition rate constant increased and the activation energy decreased. The temperature of storage also affected the decomposition of substance, however, 10% hydrogen peroxide solutions prepared in PEG-300, and stabilized with the addition of 6% (w/w of urea had the best constancy.

  11. Laser-induced photoelectrochemistry: scavenging of photoemitted electrons in aqueous and non-aqueous solutions by electroactive organic species

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, J.H. (Lawrence Livermore Lab., CA); Kovalenko, L.J.; Deutscher, S.B.; Harrar, J.E.; Perone, S.P.

    1980-01-01

    Photoemission current at a mercury electrode has been characterized electrochemically for aqueous solutions of methyl viologen, the disodium salt of anthraquinone-1,5-disulfonic acid, hydroquinone, p-benzoquinone, and chlorophyllin, and in DMF solutions of N/sub 2/O and anthraquinone. The scavenging species could be determined by comparing photoemission current-voltage curves with polarographic and cyclic voltammetric data. 11 figures.

  12. Linear polymer aqueous solutions in soft lubrication:From boundary to mixed lubrication

    Institute of Scientific and Technical Information of China (English)

    LIU; ShuHai; TAN; GuiBin; WANG; DeGuo

    2013-01-01

    In order to better understand linear polymer aqueous solutions in soft lubrication from boundary to mixed lubrication,poly(ethylene glycol) and sodium hyaluronateare used as model polymers were investigated by using UMT-2 tribometer with the ball-on-disk mode. The relationship between the master Stribeck curves of the polymer aqueous solutions and the influence factors were investigated. Experimental results indicated that soft lubrication is determined by lubricant rheological properties and surface-lubricant interactions, e.g., wetting behavior of polymer aqueous solution on tribological surfaces.

  13. Preparation of CdTe nanocrystal-polymer composite microspheres in aqueous solution by dispersing method

    Institute of Scientific and Technical Information of China (English)

    LI Minjie; WANG Chunlei; HAN Kun; YANG Bai

    2005-01-01

    Highly fluorescent CdTe nanocrystals were synthesized in aqueous solution, and then processible CdTe nanocrystal-polymer composites were fabricated by coating the aqueous nanocrystals with copolymers of styrene and octadecyl-p-vinyl-benzyldimethylammonium chloride (SOV- DAC) directly. A dichloromethane solution of CdTe nano- crystal-polymer composites was dispersed in the aqueous solution of poly (vinyl alcohol) (PVA) generating highly fluorescent microspheres. Experimental parameters such as the concentration of nanocrystal-polymer composites, the concentration of PVA, and stirring speed which had important effect on the preparation of the microspheres were investigated in detail with fluorescent microscope characterization.

  14. Formation and disappearance of superoxide radicals in aqueous solutions. [79 references

    Energy Technology Data Exchange (ETDEWEB)

    Allen, A O; Bielski, B H.J.

    1980-01-01

    A literature review of superoxide radicals in aqueous solutions is presented covering the following: history; methods of formation of aqueous HO/sub 2//HO/sub 2//sup -/ by radiolysis and photolysis, electrolysis, mixing nonaqueous solutions into water, chemical reactions, enzymatic generation of O/sub 2//sup -/, and photosensitization; and properties of HO/sub 2//O/sub 2//sup -/ in aqueous solution, which cover spontaneous dismutation rates, pk and absorption spectra, catalyzed dismutation, thermodynamics and the so-called Haber-Weiss Reaction.

  15. Cryo-irradiation as a terminal method for the sterilization of drug aqueous solutions.

    Science.gov (United States)

    Maquille, Aubert; Habib Jiwan, Jean-Louis; Tilquin, Bernard

    2008-05-01

    The aim of this study is to evaluate the specificities of the irradiation of drugs in frozen aqueous solution. The structures of the degradation products were determined to gain insight into the radiolysis mechanisms occurring in frozen aqueous solutions. Metoclopramide hydrochloride and metoprolol tartrate were chosen as models. The frozen solutions were irradiated at dry ice temperature by high energy electrons at various doses. The drug purity (chemical potency) and the radiolysis products were quantified by HPLC-DAD. Characterization of the degradation products was performed by LC-APCI-MS-MS. The structures of the radiolysis products detected in irradiated frozen aqueous solutions were compared to those detected in solid-state and aqueous solutions (previous studies). For both metoclopramide and metoprolol, solute loss upon irradiation of frozen aqueous solutions was negligible. Five radiolysis products present in traces were identified in irradiated metoclopramide frozen solutions. Three of them were previously identified in solid-state irradiated metoclopramide crystals. The two others were formed following reactions with the hydroxyl radical (indirect effect). Only one fragmentation product was observed in irradiated metoprolol frozen solutions. For both drugs, radiosterilization of frozen solutions, even at high doses (25 kGy), was found to be possible.

  16. [Extraction of 2-amino-4-nitrophenol and 4-phenylphenol from aqueous solutions].

    Science.gov (United States)

    Fursova, I A; Shormanov, V K

    2002-01-01

    The authors provide the results of extraction of 2-amino-4-nitrophenol and 4-phenilphenol from aqueous solutions by five organic soluvants. The dependence of the extraction degree on some factors (nature of extragent, pH of aqueous phase medium, extragents saturation with water) was established. Necessary extraction rate for isolation of preset quality of the test substances was calculated.

  17. 1,3-DIPOLAR CYCLOADDITION OF PHENYL AZIDE TO NORBORNENE IN AQUEOUS-SOLUTIONS

    NARCIS (Netherlands)

    Wijnen, J.W; Steiner, R.A.; Engberts, J.B.F.N.

    1995-01-01

    Second-order rate constants for the cycloaddition of phenyl azide to norbornene were determined in aqueous solutions. In organic solvents this reaction shows a very small solvent effect. In highly aqueous media, however, remarkable accelerations are observed. The solvent dependence of the rate const

  18. Pulse radiolysis of tetrazolium violet in aqueous and aqueous-alcoholic solutions under oxidative and reductive conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kovacs, A. [Institute of Isotopes, Hungarian Academy of Sciences, P.O. Box 77, H-1525 Budapest (Hungary)], E-mail: akovacs@iki.kfki.hu; Wojnarovits, L.; Palfi, T. [Institute of Isotopes, Hungarian Academy of Sciences, P.O. Box 77, H-1525 Budapest (Hungary); Emi-Reynolds, G. [Radiation Protection Institute, Ghana Atomic Energy Commission, P.O. Box LG 80, Legon-Accra (Ghana); Fletcher, J. [Department of Physics, University of Cape Coast, Cape Coast (Ghana)

    2008-09-15

    The radiolytic reduction of colourless tetrazolium salts to coloured formazans in liquid and solid state is suggested for dosimetry purposes. In order to clarify the reaction mechanism, a pulse radiolysis study was conducted in aqueous and aqueous-alcoholic solutions under oxidative and reductive conditions. Under reducing conditions, fast formation of the electron adduct tetrazolinyl radical was observed: coloured formazan final product formed during the decay of electron adduct. Both the decay of the tetrazolinyl radical and the formation of the formazan were found to be second order. The spectra of the formazan were similar in neutral and alkaline solutions, but with higher absorbance in the latter solutions due to the higher molar absorption coefficient. Under oxidative conditions formazan did not form; hydroxylated products through OH-adducts were observed in the pH range studied.

  19. Pulse radiolysis of tetrazolium violet in aqueous and aqueous-alcoholic solutions under oxidative and reductive conditions

    Science.gov (United States)

    Kovács, A.; Wojnárovits, L.; Pálfi, T.; Emi-Reynolds, G.; Fletcher, J.

    2008-09-01

    The radiolytic reduction of colourless tetrazolium salts to coloured formazans in liquid and solid state is suggested for dosimetry purposes. In order to clarify the reaction mechanism, a pulse radiolysis study was conducted in aqueous and aqueous-alcoholic solutions under oxidative and reductive conditions. Under reducing conditions, fast formation of the electron adduct tetrazolinyl radical was observed: coloured formazan final product formed during the decay of electron adduct. Both the decay of the tetrazolinyl radical and the formation of the formazan were found to be second order. The spectra of the formazan were similar in neutral and alkaline solutions, but with higher absorbance in the latter solutions due to the higher molar absorption coefficient. Under oxidative conditions formazan did not form; hydroxylated products through OH-adducts were observed in the pH range studied.

  20. Thermodynamics of the complexation of arabinogalactan with salicylic and p-aminobenzoic acids in aqueous solutions

    Science.gov (United States)

    Mudarisova, R. Kh.; Badykova, L. A.

    2016-03-01

    The thermodynamics of complexation of arabinogalactan with salicylic and p-aminobenzoic acids in aqueous solutions is studied by means spectroscopy. The standard thermodynamic characteristics (Δ H°; Δ G°; Δ S°) of complexation are calculated.

  1. Absorption of nitric oxide into aqueous solutions of ferrous chelates accompanied by instantaneous reaction

    NARCIS (Netherlands)

    Demmink, J.F; vanGils, I.C.F.; Beenackers, A.A C M

    1997-01-01

    The absorption of nitric oxide (NO) into aqueous solutions of ferrous chelates of nitrilotriacetic acid (NTA), ethylene diaminetetraacetic acid (EDTA), hydroxyethylenediaminetriacetic acid (HEDTA), and diethylenetriaminepentaacetic acid (DTPA) was studied in a stirred cell reactor. Experimental cond

  2. Decomposition Studies of Triphenylboron, Diphenylborinic Acid and Phenylboric Acid in Aqueous Alkaline Solutions Containing Copper

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, C.L. [Westinghouse Savannah River Company, AIKEN, SC (United States); Peterson, R. A.

    1997-02-11

    This report documents the copper-catalyzed chemical kinetics of triphenylboron, diphenylborinic acid and phenylboric acid (3PB, 2PB and PBA) in aqueous alkaline solution contained in carbon-steel vessels between 40 and 70 degrees C.

  3. Absorption of nitric oxide into aqueous solutions of ferrous chelates accompanied by instantaneous reaction

    NARCIS (Netherlands)

    Demmink, J.F; vanGils, I.C.F.; Beenackers, A.A C M

    1997-01-01

    The absorption of nitric oxide (NO) into aqueous solutions of ferrous chelates of nitrilotriacetic acid (NTA), ethylene diaminetetraacetic acid (EDTA), hydroxyethylenediaminetriacetic acid (HEDTA), and diethylenetriaminepentaacetic acid (DTPA) was studied in a stirred cell reactor. Experimental

  4. Albendazole Solubilization in Aqueous Solutions of Nicotinamide: Thermodynamics and Solute Solvent Interactions

    Directory of Open Access Journals (Sweden)

    Sushree Tripathy

    2013-12-01

    Full Text Available The present study deals with experiments so as to highlight the solute (drug albendazole – solvent ( water interactions and related thermodynamic modifications in presence of the hydrotropic agent nicotinamide at different temperatures T (= 298.15 to 313.15K. Density and conductivity values of albendazole have been determined in water in (0.2, 0.4, 0.6, 0.8, 1 and 2 mol dm-3 aqueous solutions of nicotinamide at temperatures T(= 298.15, 303.15, 308.15 and 313.15K, where as solubility was studied at 308.15. A concentration dependent solubility enhancement of albendazole was observed. The solubility data was treated to obtain the concentration dependent solubilization efficiency and the Gibbs free energy of transfer (∆G0tr of albendazole from pure water to the solvent systems. From the density values, the limiting partial molar volumes and expansibilities have been calculated. The limiting molar conductance (L0 and Arrhenius activation energy (Es values have been calculated from the generated conductance values. The thermo physical parameters were discussed in terms of solute solvent interactions.

  5. Relation between the solubility of proteins in aqueous solutions and the second virial coefficient of the solution

    NARCIS (Netherlands)

    Haas, C; Drenth, J; Wilson, WW

    1999-01-01

    Tn recent publications it was pointed out that there is a correlation between the observed values of the solubility of proteins in aqueous solutions and the second virial coefficient of the solution. In this paper we give a theoretical explanation of this relation. The derived theoretical expression

  6. Relation between the solubility of proteins in aqueous solutions and the second virial coefficient of the solution

    NARCIS (Netherlands)

    Haas, C; Drenth, J; Wilson, WW

    1999-01-01

    Tn recent publications it was pointed out that there is a correlation between the observed values of the solubility of proteins in aqueous solutions and the second virial coefficient of the solution. In this paper we give a theoretical explanation of this relation. The derived theoretical expression

  7. Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation

    OpenAIRE

    Mohsen Hosseinzadeh; Seyyed Ali Seyyed Ebrahimi; Shahram Raygan; Seyed Morteza Masoudpanah

    2016-01-01

    In this study, the removal of cadmium and lead ions from aqueous solution by nanocrystalline magnetite was investigated. The nanocrystalline magnetite was synthesized by mechanochemical activation of hematite in a high energy planetary mill in argon atmosphere for 45 hours. The ability of the synthesized nanocrystalline magnetite for removal of Cd(II) and Pb(II) from aqueous solutions was studied in a batch reactor under different experimental conditions with different pHs, contact times, ini...

  8. Molecular structures and protonation state of 2-Mercaptopyridine in aqueous solution

    Science.gov (United States)

    Eckert, S.; Miedema, P. S.; Quevedo, W.; O'Cinneide, B.; Fondell, M.; Beye, M.; Pietzsch, A.; Ross, M.; Khalil, M.; Föhlisch, A.

    2016-03-01

    The speciation of 2-Mercaptopyridine in aqueous solution has been investigated with nitrogen 1s Near Edge X-ray Absorption Fine Structure spectroscopy and time dependent Density Functional Theory. The prevalence of distinct species as a function of the solvent basicity is established. No indications of dimerization towards high concentrations are found. The determination of different molecular structures of 2-Mercaptopyridine in aqueous solution is put into the context of proton-transfer in keto-enol and thione-thiol tautomerisms.

  9. Pervaporation of Aqueous Solution of Acetaldehyde Through ZSM-5 Filled PDMS Composite Membrane

    Institute of Scientific and Technical Information of China (English)

    伍艳辉; 谭惠芬; 李佟茗; 金源

    2012-01-01

    Hydrophobic ZSM-5 zeolite filled polydimethylsiloxane (PDMS) composite membranes with Nylon micro-filtration membrane as the support layer were prepared to separate acetaldehyde from its aqueous solution. The composite membranes were characterized by Fourier transform infrared spectroscopy and X-ray diffraction. Their structural morphology and thermal stability were also examined. The swelling study showed that the composite membranes presented higher degree of swelling in aqueous solution of acetaldehyde than in pure water at 25℃,

  10. Characterization of trehalose aqueous solutions by neutron spin echo

    CERN Document Server

    Branca, C; Magazù, S; Maisano, G; Mangione, A; Pappas, C; Triolo, A

    2002-01-01

    The present work reports neutron spin-echo (NSE) results on aqueous mixtures of trehalose, a naturally occurring disaccharide of glucose, which shows an extraordinary bioprotective effectiveness against dehydration and freezing. The aim of the work is to furnish new results on the dynamics of the trehalose/water system on the nano- and picosecond scales. (orig.)

  11. REMOVAL OF LEAD(II) IONS FROM AQUEOUS SOLUTIONS ...

    African Journals Online (AJOL)

    Preferred Customer

    osmosis have been used for removing heavy metal ions from aqueous media ... surface modification of the mesoporous silica materials to introduce organic .... groups were present in the frameworks of the composites as exemplified by ... They formed clusters of irregularly shaped particles which were mostly amorphous.

  12. Characterization of trehalose aqueous solutions by neutron spin echo

    Energy Technology Data Exchange (ETDEWEB)

    Branca, C.; Faraone, A.; Magazu' , S.; Maisano, G.; Mangione, A. [Dipartimento di Fisica and INFM, Universita di Messina, PO Box 55, 98166 Messina (Italy); Pappas, C.; Triolo, A. [Hahn-Meitner-Institut, BENSC (NI), Glienicker Strasse, 14109 Berlin (Germany)

    2002-07-01

    The present work reports neutron spin-echo (NSE) results on aqueous mixtures of trehalose, a naturally occurring disaccharide of glucose, which shows an extraordinary bioprotective effectiveness against dehydration and freezing. The aim of the work is to furnish new results on the dynamics of the trehalose/water system on the nano- and picosecond scales. (orig.)

  13. Oxidation of atrazine by photoactivated potassium persulfate in aqueous solutions

    Science.gov (United States)

    Khandarkhaeva, M. S.; Aseev, D. G.; Sizykh, M. R.; Batoeva, A. A.

    2016-11-01

    General laws of the photochemical oxidation of atrazine by inorganic peroxo compounds under the impact of solar radiation are studied. It is found that almost complete conversion of atrazine can be achieved via photochemical oxidation with persulfate after 120 min, but no deep mineralization is observed. The effect an aqueous matrix has on the processes of atrazine degradation in combined oxidation systems is considered.

  14. Kinetics of ozone-phenol reaction in aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, M.G.; Shambaugh, R.L.

    1982-01-01

    The kinetics of the reaction of ozone and phenol in aqueous medium was studied. The reaction was first order with respect to both ozone and phenol. The rate constant was found to increase with increase in the pH of the reaction mixture. Four different catalysts were examined for their effect on the rate of reaction. 30 refs.

  15. Interaction between bacteriophage and pyrophyllite clay in aqueous solution

    Science.gov (United States)

    Park, Jeong-Ann; Kim, Jae-Hyun; Kang, Jin-Kyu; Son, Jeong-Woo; Yi, In-Geol; Kim, Song-Bae

    2014-05-01

    Viral contamination results in a degradation in drinking water quality and a threat to public health. Toprovide safe drinking water, water treatment alternatives using various adsorbents and filter media such as activated carbon, bituminous coal, quartz sand and clay have been considered. Pyrophyllite is a 2:1 clay mineral having dioctahedral layer structure with octahedrally coordinated Al ion sheets between two sheets of SiO4 tetrahedra. It is a hydrous aluminosilicate clay with the chemical composition AlSi2O5(OH). Pyrophyllite has recently been investigated as a potential low-cost and environmental friendly adsorbent for removing various contaminants. The aim of this study was to investigate the removal of the bacteriophage MS2 from aqueous solution using pyrophyllite. Batch experiments were conducted to examine the MS2 sorption to pyrophyllite. The influence of fluoride, a groundwater contaminant, on the removal of MS2 was also observed. Batch results demonstrated that pyrophyllite was effective in MS2 removal. The percent removal increased from 5.26% to 99.99% (= 4.0 log removal) as the pyrophyllite concentrations increased from 0.2 to 20 g/L. More than 99% of MS2 could be removed with a pyrophyllite concentration of ≥ 4 g/L. The sorption of MS2 to pyrophyllite was rapid. Within 15 min, approximately 99.98% (= 3.7 log removal) of MS2 was attained. More than 4.0 log removal was achieved after 180 min. The experimental data were analyzed with the pseudo first-order and pseudo second-order kinetic models. The correlation coefficient showed that pseudo second-order model was better than pseudo first-order model at describing the kinetic data. The amount of MS2 removed at equilibrium was determined to be 1.43 × 108 pfu/g from the pseudo second-order model. The experimental data were also analyzed with the Freundlich and Langmuir isotherm models. The correlation coefficients showed that the Langmuir model was more suitable than the Freundlich model for MS2

  16. Development of tropine-salt aqueous two-phase systems and removal of hydrophilic ionic liquids from aqueous solution.

    Science.gov (United States)

    Wu, Haoran; Yao, Shun; Qian, Guofei; Song, Hang

    2016-08-26

    A novel aqueous two-phase systems (ATPS) composed of a small molecule organic compound tropine and an organic or inorganic salt aqueous solution has been developed for the first time. The phase behavior of tropine-salt ATPS was systemically investigated and the phase equilibrium data were measured in different temperatures and concentrations and correlated by the Merchuk equation with satisfactory results. The detection of the conductivity and particle size proved the formation of micelle in the process of forming tropine-salt ATPS. The separation application of the ATPS was assessed with the removal of hydrophilic benzothiazolium-based ionic liquids (ILs) from aqueous solution. The result showed that ILs were effectively extracted into the top tropine-rich phase. Finally, ILs in the top tropine-rich phase were further separated by the means of adsorption-desorption with DM301 macroporous resin and ethanol. The method of novel tropine-salt ATPS combined with adsorption-desorption is demonstrated a promising alternative thought and approach for the removal or recovery of hydrophilic compounds from aqueous media and also could provide a potential application for bio-separation.

  17. Preparation of nanoparticles of Magnolia bark extract by rapid expansion from supercritical solution into aqueous solutions.

    Science.gov (United States)

    He, Shuai; Zhou, Benjie; Zhang, Shouyao; Lei, Zhengjie; Zhang, Zhongyi

    2011-01-01

    A rapid expansion from supercritical solution into aqueous solution (RESSAS) technology was presented for the micronization of Chinese medicinal material. Magnolia bark extract (MBE) obtained by supercritical carbon dioxide (scCO₂) extraction technology was chosen as the experimental material. RESSAS process produced 303.0 nm nanoparticles (size distribution, 243.6-320.5 nm), which was significantly smaller than the 55.3 µm particles (size distribution, 8.3-102.4 µm) prepared by conventional mechanical milling. The effect of process parameters, including extraction temperature (30 °C, 40 °C, 50 °C), extraction pressure (200, 250, 300 bar) and nozzle size (50, 100, 200 µm), on the size distribution of nanoparticles was investigated. The characteristics of nanoparticles and materials were also studied by scanning electron microscopy (SEM) and laser light scattering (LLS). This study demonstrates that RESSAS is applicable for preparing nanoparticles of MBE at low operating temperature; the process is simple without any residual solvent.

  18. Aqueous solutions of acidic ionic liquids for enhanced stability of polyoxometalate-carbon supercapacitor electrodes

    Science.gov (United States)

    Hu, Chenchen; Zhao, Enbo; Nitta, Naoki; Magasinski, Alexandre; Berdichevsky, Gene; Yushin, Gleb

    2016-09-01

    Nanocomposites based on polyoxometalates (POMs) nanoconfined in microporous carbons have been synthesized and used as electrodes for supercapacitors. The addition of the pseudocapacitance from highly reversible redox reaction of POMs to the electric double-layer capacitance of carbon lead to an increase in specific capacitance of ∼90% at 1 mV s-1. However, high solubility of POM in traditional aqueous electrolytes leads to rapid capacity fading. Here we demonstrate that the use of aqueous solutions of protic ionic liquids (P-IL) as electrolyte instead of aqueous sulfuric acid solutions offers an opportunity to significantly improve POM cycling stability. Virtually no degradation in capacitance was observed in POM-based positive electrode after 10,000 cycles in an asymmetric capacitor with P-IL aqueous electrolyte. As such, POM-based carbon composites may now present a viable solution for enhancing energy density of electrical double layer capacitors (EDLC) based on pure carbon electrodes.

  19. Treatment of infectious skin defects or ulcers with electrolyzed strong acid aqueous solution.

    Science.gov (United States)

    Sekiya, S; Ohmori, K; Harii, K

    1997-01-01

    A chronic ulcer with an infection such as methicillin-resistant Staphylococcus aureus is hard to heal. Plastic and reconstructive surgeons often encounter such chronic ulcers that are resistant to surgical or various conservative treatments. We applied conservative treatment using an electrolyzed strong acid aqueous solution and obtained satisfactory results. The lesion was washed with the solution or soaked in a bowl of the solution for approximately 20 min twice a day. Fresh electrolyzed strong acid aqueous solution is unstable and should be stored in a cool, dark site in a sealed bottle. It should be used within a week after it has been produced. Here we report on 15 cases of infectious ulcers that were treated by electrolyzed strong acid aqueous solution. Of these cases, 7 patients were healed, 3 were granulated, and in 5, infection subsided. In most cases the lesion became less reddish and less edematous. Discharge or foul odor from the lesion was decreased. Electrolyzed strong acid aqueous solution was especially effective for treating a chronic refractory ulcer combined with diabetes melitus or peripheral circulatory insufficiency. This clinically applied therapy of electrolyzed strong acid aqueous solution was found to be effective so that this new therapeutic technique for ulcer treatment can now be conveniently utilized.

  20. Supercooling of aqueous dimethylsulfoxide solution at normal and high pressures: Evidence for the coexistence of phase-separated aqueous dimethylsulfoxide solutions of different water structures.

    Science.gov (United States)

    Kanno, H; Kajiwara, K; Miyata, K

    2010-05-21

    Supercooling behavior of aqueous dimethylsulfoxide (DMSO) solution was investigated as a function of DMSO concentration and at high pressures. A linear relationship was observed for T(H) (homogeneous ice nucleation temperature) and T(m) (melting temperature) for the supercooling of aqueous DMSO solution at normal pressure. Analysis of the DTA (differential thermal analysis) traces for homogeneous ice crystallization in the bottom region of the T(H) curve for a DMSO solution of R=20 (R: moles of water/moles of DMSO) at high pressures supported the contention that the second critical point (SCP) of liquid water should exist at P(c2)= approximately 200 MPa and at T(c2)temperature of SCP). The presence of two T(H) peaks for DMSO solutions (R=15, 12, and 10) suggests that phase separation occurs in aqueous DMSO solution (Rtemperatures (different liquid water structures [LDL-like and HDL-like structures (LDL: low-density liquid water, HDL: high-density liquid water)] in the pressure range of 120-230 MPa.

  1. Enthalpy of solution of CO{sub 2} in aqueous solutions of 2-amino-2-methyl-1-propanol

    Energy Technology Data Exchange (ETDEWEB)

    Arcis, Hugues [Laboratoire de Thermodynamique des Solutions et des Polymeres, Universite Blaise Pascal, Clermont-Ferrand/CNRS, 63177 Aubiere (France); Rodier, Laurence [Laboratoire de Thermodynamique des Solutions et des Polymeres, Universite Blaise Pascal, Clermont-Ferrand/CNRS, 63177 Aubiere (France); Coxam, Jean-Yves [Laboratoire de Thermodynamique des Solutions et des Polymeres, Universite Blaise Pascal, Clermont-Ferrand/CNRS, 63177 Aubiere (France)]. E-mail: j-yves.coxam@univ-bpclermont.fr

    2007-06-15

    The enthalpies of solution of CO{sub 2} in aqueous solution of 2-amino-2-methyl-1-propanol (AMP) 15 wt% and 30 wt% were measured at 322.5 K and pressures range from (0.2 to 5) MPa using a flow calorimetric technique. The gas solubilities were simultaneously determined from the calorimetric data. The solubilities were compared to available literature values obtained by direct measurements. The experimental enthalpies of solution were compared to the values derived from the literature vapor liquid equilibrium data. This work provides calorimetric data that will be used later for the development of a thermodynamic model to predict both solubilities and enthalpies of solution of acid gases in aqueous amine solutions.

  2. Tetraethyl Orthosilicate Coated Hydroxyapatite Powders for Lead Ions Removal from Aqueous Solutions

    Directory of Open Access Journals (Sweden)

    Rodica V. Ghita

    2014-01-01

    Full Text Available The goal of this study was to synthetize and characterize a porous material based on tetraethyl orthosilicate (TEOS coated hydroxyapatite (HApTh after removal experiments of Pb2+ ions from aqueous solutions. In order to study the morphology and composition, the samples obtained after removal experiments of Pb2+ ions from aqueous solution with the initial Pb2+ ion concentrations of the aqueous solutions were 0.1 g·L−1 (HApTh-50 and 0.9 g·L−1 (HApTh-450 have been investigated by scanning electron microscopy (SEM equipped with an energy dispersive X-ray spectrometer (EDS, Fourier transform infrared spectroscopy (FTIR, and transmission electron microscopy (TEM. Removal experiments of Pb2+ ions were carried out in aqueous solutions with controlled concentration of Pb2+. After the removal experiment of Pb2+ ions from solutions, porous hydroxyapatite nanoparticles were transformed into HApTh-50 and HApTh-450 due to the adsorption of Pb2+ ions followed by a cation exchange reaction. The obtained results show that the porous HApTh nanopowders could be used for Pb2+ ions removal from aqueous solutions.

  3. SEPARATION OF POLONIUM, PROTACTINIUM OR MIXTURES THEREOF IN AQUEOUS SOLUTION FROM BISMUTH, LEAD, ZIRCONIUM AND/OR COLUMBIUM VALUES

    Science.gov (United States)

    Van Winkle, Q.; Kraus, K.A.

    1959-10-27

    A process is presented for separating polonium, protactinium, or mixtures thereof in aqueous solution from bismuth, zirconium, lead, and niobium values contained in the solution. The method comprises providing hydrochloric acid in the solution in a concentration of at least 5N. contacting the aqueous solution with a substantially waterimmiscible organic solvent such as diisopropyl ketone, and separating the aqueous phase containing the bismuth, zirconium, lead, and niobium from the organic extract phase containing the polonium, protactinium, or mixture thereof.

  4. Experimental determination of the temperature dependence of water activities for a selection of aqueous organic solutions

    Directory of Open Access Journals (Sweden)

    G. Ganbavale

    2014-05-01

    Full Text Available This work presents experimental data of the temperature dependence of water activity in aqueous organic solutions relevant for tropospheric conditions (200–273 K. Water activity (aw at low temperatures (T is a crucial parameter for predicting homogeneous ice nucleation. We investigated temperature dependent water activities, ice freezing and melting temperatures of solutions, and vapour pressures of a selection of atmospherically relevant aqueous organic systems. To measure aw over a wide composition range and with a focus on low temperatures, we use various aw measurement techniques and instruments: a dew point water activity meter, an electrodynamic balance (EDB, differential scanning calorimetry (DSC, and a setup to measure the total gas phase pressure at equilibrium over aqueous solutions. Water activity measurements were performed for aqueous multicomponent and multifunctional organic mixtures containing the functional groups typically found in atmospheric organic aerosols, such as hydroxyl, carboxyl, ketone, ether, ester, and aromatic groups. The aqueous organic systems studied at several fixed compositions over a considerable temperature range differ significantly in their temperature dependence. Aqueous organic systems of 1,4-butanediol and methoxyacetic acid show a moderate decrease in aw with decreasing temperature. The aqueous M5 system (a multicomponent system containing five different dicarboxylic acids and aqueous 2-(2-ethoxyethoxyethanol solutions both show a strong increase of water activity with decreasing temperature at high solute concentrations for TTaw can be reversed at low temperatures and that linear extrapolations of high temperature data may lead to erroneous predictions. To avoid this, experimentally determined aw at low temperature are needed to improve thermodynamic models towards lower temperatures and for improved predictions of the ice nucleation ability of organic–water systems.

  5. Sorption Potentials of Waste Tyre for Some Heavy Metals (Pb Cd in Aqueous Solution

    Directory of Open Access Journals (Sweden)

    Austin Kanayo ASIAGWU

    2009-07-01

    Full Text Available An investigation into the adsorption potential of activated and inactivated waste tyre powders for some heavy metals (Pb2+ and Cd2+ in their aqueous solution has been studied. The result indicated that inactivated waste tyre is a good non-conventional adsorbent for the removal of Cd from aqueous solution. A total of 93.3% of Cadmium contents was removed. The inactivated waste type proved a good adsorbent for the removal of Pb2+ 5g of 500mm activated tyre removed over 86.66% of Pb2+ from solution.

  6. Corrosion resistance of amorphous and crystalline Pd40Ni40P20 alloys in aqueous solutions

    DEFF Research Database (Denmark)

    Wu, Y.F.; Chiang, Wen-Chi; Chu, J.

    2006-01-01

    The corrosion behaviors of amorphous and crystalline Pd40Ni40P20 alloys in various aqueous solutions are reported in this paper. The corrosion resistance of crystalline (annealed) Pd40Ni40P20 is better than that of amorphous Pd40Ni40P20 in various corrosive solutions, due to crystalline Pd40Ni40P20...

  7. Study on Thermosensitive Micellization of Dextran-g-PNIPAAm in Aqueous Solutions

    Institute of Scientific and Technical Information of China (English)

    Dan ZHAO; Li Qun WANG; Ke Hua TU; Song Wei TAN

    2006-01-01

    The thermosensitive micellization of dextran-g-PNIPAAm in aqueous solutions has been investigated by fluorescence spectroscopy, dynamic light scattering and transmission electron microscope. The formed polymeric micelles showed different diameters of about 20 nm or 100nm, when the solution temperature was below or above the phase transition temperature.

  8. Aqueous solutions of proline and NaCl studied by differential scanning calorimetry at subzero temperatures

    DEFF Research Database (Denmark)

    Rasmussen, Peter Have; Jørgensen, Bo; Nielsen, Jette

    1997-01-01

    The hydration properties of proline are studied by differential scanning calorimetry (DSC) in aqueous solutions during freezing to -60 degrees C and subsequent heating to +20 degrees C. The concentration of proline in the freeze concentrated solution was estimated to approximately 50 wt% (w/w) in...

  9. Modeling flavor release from aqueous sucrose solutions, using mass transfer and partition coefficients

    NARCIS (Netherlands)

    Nahon, D.F.; Harrison, M.; Roozen, J.P.

    2000-01-01

    The penetration theory of interfacial mass transfer was used to model flavor release from aqueous solutions containing different concentrations of sucrose. The mass transfer coefficient and the gas/solution partition coefficient are the main factors of the model influencing the release in time. Para

  10. KINETICS OF THE HYDROXYPROPYLATION OF POTATO STARCH IN AQUEOUS-SOLUTION

    NARCIS (Netherlands)

    LAMMERS, G; STAMHUIS, EJ; BEENACKERS, AACM

    1993-01-01

    Kinetic results are presented for the hydroxypropylation of Potato starch with methyloxirane in aqueous solution. Reaction temperatures were varied from 303 to 362 K. Sodium hydroxide was used as a catalyst. The overall conversion rate of methyloxirane in alkaline starch solution is determined by th

  11. Direct evidence on the existence of [Mo132]Keplerate-type species in aqueous solution.

    Science.gov (United States)

    Roy, Soumyajit; Planken, Karel L; Kim, Robbert; Mandele, Dexx v d; Kegel, Willem K

    2007-10-15

    We demonstrate the existence of discrete single molecular [Mo(132)] Keplerate-type clusters in aqueous solution. Starting from a discrete spherical [Mo(132)] cluster, the formation of an open-basket-type [Mo(116)] defect structure is shown for the first time in solution using analytical ultracentrifugation sedimentation velocity experiments.

  12. Ab initio aqueous thermochemistry: application to the oxidation of hydroxylamine in nitric acid solution.

    Science.gov (United States)

    Ashcraft, Robert W; Raman, Sumathy; Green, William H

    2007-10-18

    Ab initio molecular orbital calculations were performed and thermochemical parameters estimated for 46 species involved in the oxidation of hydroxylamine in aqueous nitric acid solution. Solution-phase properties were estimated using the several levels of theory in Gaussian03 and using COSMOtherm. The use of computational chemistry calculations for the estimation of physical properties and constants in solution is addressed. The connection between the pseudochemical potential of Ben-Naim and the traditional standard state-based thermochemistry is shown, and the connection of these ideas to computational chemistry results is established. This theoretical framework provides a basis for the practical use of the solution-phase computational chemistry estimates for real systems, without the implicit assumptions that often hide the nuances of solution-phase thermochemistry. The effect of nonidealities and a method to account for them is also discussed. A method is presented for estimating the solvation enthalpy and entropy for dilute aqueous solutions based on the solvation free energy from the ab initio calculations. The accuracy of the estimated thermochemical parameters was determined through comparison with (i) enthalpies of formation in the gas phase and in solution, (ii) Henry's law data for aqueous solutions, and (iii) various reaction equilibria in aqueous solution. Typical mean absolute deviations (MAD) for the solvation free energy in room-temperature water appear to be ~1.5 kcal/mol for most methods investigated. The MAD for computed enthalpies of formation in solution was 1.5-3 kcal/mol, depending on the methodology employed and the type of species (ion, radical, closed-shell) being computed. This work provides a relatively simple and unambiguous approach that can be used to estimate the thermochemical parameters needed to build detailed ab initio kinetic models of systems in aqueous solution. Technical challenges that limit the accuracy of the estimates are

  13. Phase-transition and aggregation characteristics of a thermoresponsive dextran derivative in aqueous solutions.

    Science.gov (United States)

    Shi, Huan-Ying; Zhang, Li-Ming

    2006-10-16

    Grafting of poly(N-vinylcaprolactam) side chains onto a hydrophilic dextran backbone was found to provide the dextran with new, thermoresponsive properties in aqueous solutions. Depending on its solution concentration, the resulting dextran derivative could exhibit a temperature-induced phase-transition and critical transition temperature (T(c)). Different anions and cations of added salts, including five potassium salts and five alkali-metal chlorides, were observed to influence the T(c) value of its aqueous solution. Except for potassium iodide, all added salts were found to lower the T(c) value. The addition of the surfactant, cationic cetyltrimethylammonium bromide or anionic sodium dodecyl sulfate, resulted in an increase of the T(c) value. With the help of the Coomassie Brilliant Blue dye as a polarity probe, the formation of hydrophobic aggregates above the T(c) was revealed for this new dextran derivative in aqueous solution.

  14. Comparison of cytotoxicity in vitro and irritation in vivo for aqueous and oily solutions of surfactants.

    Science.gov (United States)

    Czajkowska-Kośnik, Anna; Wolska, Eliza; Chorążewicz, Juliusz; Sznitowska, Małgorzata

    2015-01-01

    The in vivo model on rabbit eyes and the in vitro cytotoxicity on fibroblasts were used to compare irritation effect of aqueous and oily (Miglyol 812) solutions of surfactants. Tween 20, Tween 80 and Cremophor EL were tested in different concentrations (0.1, 1 or 5%) and the in vitro test demonstrated that surfactants in oil are less cytotoxic than in aqueous solutions. In the in vivo study, the aqueous solutions of surfactants were characterized as non-irritant while small changes in conjunctiva were observed after application the oily solutions of surfactants and the preparations were classified as slightly irritant, however this effect was similar when Miglyol was applied alone. In conclusion, it is reported that the MTT assay does not correlate well with the Draize scores.

  15. Morphological modifications of selenium by recrystallization of its aqueous complex solutions.

    Science.gov (United States)

    Batabyal, Sudip K; Basu, C; Das, A R; Sanyal, G S

    2006-07-01

    Recrystallization of elemental selenium (Se) from aqueous solution in presence of sodium sulphite (Na2SO3) and sodium sulphide (Na2S) acting as complexing agents has resulted in the formation of nano and microstructures of Se having five different morphological modifications. (1) An aqueous solution of sodium selenosulphate (Na2SO3Se) obtained by dissolving Se in Na2SO3 under refluxing condition yields hemispherical microcrystals. (2) The filtrate of the above reaction mixture on aging produces hexagonal prismatic microrods of Se. Addition of Na2SO3Se solution to formalin (HCHO) at room temperature and refluxing conditions generates (3) Se nanorods, and (4) spherical microcrystals, respectively. (5) Recrystallization of Se from aqueous solution of Na2S develops flower shaped microcrystals.

  16. The radiolysis of iodine in aqueous solutions containing methane

    Science.gov (United States)

    Paquette, Jean; Ford, Beverly L.

    The γ-radiolysis of iodine, iodine, iodate and periodate solutions containing methane has been investigated. Iodoalkanes are produced in these solutions upon irradiation. In the case of unbuffered iodine, iodate and periodate solutions at an initial concentration of 1.0 × 10 -4 mol dm -3, nearly all of the initial iodine is transformed into iodoalkanes after the absorption of a 4 kGy radiation dose. The yield of iodoalkanes is lower for iodine solutions and for iodide solutions buffered at neutral pH. It is concluded that the main reactions leading to the formation of iodoalkanes are CH 3+I 2→CH 3I+I and CH 3+I→CH 3I. In the case of iodate and periodate, these reactions could be preceeded by reactions involving the methyl radical and oxyiodine species: CH 3+IO x→CH 2O+HIO x-1.

  17. Reaction paths and equilibrium end-points in solid-solution aqueous-solution systems

    Science.gov (United States)

    Glynn, P.D.; Reardon, E.J.; Plummer, L.N.; Busenberg, E.

    1990-01-01

    Equations are presented describing equilibrium in binary solid-solution aqueous-solution (SSAS) systems after a dissolution, precipitation, or recrystallization process, as a function of the composition and relative proportion of the initial phases. Equilibrium phase diagrams incorporating the concept of stoichiometric saturation are used to interpret possible reaction paths and to demonstrate relations between stoichiometric saturation, primary saturation, and thermodynamic equilibrium states. The concept of stoichiometric saturation is found useful in interpreting and putting limits on dissolution pathways, but there currently is no basis for possible application of this concept to the prediction and/ or understanding of precipitation processes. Previously published dissolution experiments for (Ba, Sr)SO4 and (Sr, Ca)C??O3orth. solids are interpreted using equilibrium phase diagrams. These studies show that stoichiometric saturation can control, or at least influence, initial congruent dissolution pathways. The results for (Sr, Ca)CO3orth. solids reveal that stoichiometric saturation can also control the initial stages of incongruent dissolution, despite the intrinsic instability of some of the initial solids. In contrast, recrystallisation experiments in the highly soluble KCl-KBr-H2O system demonstrate equilibrium. The excess free energy of mixing calculated for K(Cl, Br) solids is closely modeled by the relation GE = ??KBr??KClRT[a0 + a1(2??KBr-1)], where a0 is 1.40 ?? 0.02, a1, is -0.08 ?? 0.03 at 25??C, and ??KBr and ??KCl are the mole fractions of KBr and KCl in the solids. The phase diagram constructed using this fit reveals an alyotropic maximum located at ??KBr = 0.676 and at a total solubility product, ???? = [K+]([Cl-] + [Br-]) = 15.35. ?? 1990.

  18. Thermodynamic behavior of erythritol in aqueous solutions and in gelatine gels and its quantification

    Energy Technology Data Exchange (ETDEWEB)

    Tyapkova, Oxana; Bader-Mittermaier, Stephanie, E-mail: stephanie.mittermaier@ivv.fraunhofer.de; Schweiggert-Weisz, Ute

    2013-08-10

    Highlights: • Differential scanning calorimetry as a method to determine erythritol crystallization. • Determination of crystallization using solution enthalpy. • Erythritol crystallization influenced by area of air–water-interfaces. • DSC method is applicable for both aqueous solutions and gels. • Adaption of DSC method to other, more complex food matrices is possible. - Abstract: As crystallization of erythritol can cause a sandy mouth-feel in sugar-free products, strategies to avoid crystallization or adaption of food formulation should be elucidated. However, until now erythritol crystallization was only quantified in aqueous solutions, but not in model food systems. Differential scanning calorimetry (DSC) is a simple method for the quantification of phase transition in various systems. However, no methods for the quantification of crystallization from aqueous systems based on DSC have been published until now. In the present study DSC was found to be suitable for the quantification of crystallization using supersaturated aqueous solutions of erythritol and erythritol containing gelatine gels for the first time. The developed method was validated by comparing the crystallization values determined by gravimetric measurement of erythritol crystals and the values obtained by DSC. No significant differences (p < 0.05) have been obtained between the results of the two methods if an appropriate design of measurements was applied. Additionally, the method was adapted to gelatine gels to elucidate the transferability to model food systems. Hence, the method is suitable for quantification of the amount of erythritol crystals present in aqueous solutions and gels, respectively.

  19. Synthesis of tyrocidine A and its analogues by spontaneous cyclization in aqueous solution.

    Science.gov (United States)

    Bu, Xianzhang; Wu, Xiaoming; Xie, Guiyang; Guo, Zhihong

    2002-08-22

    [reaction: see text] Head-to-tail cyclization of peptides is a multistep process involving tedious C-terminal activation and side chain protection. Here we report a facile, quantitative cyclization method in aqueous ammonia solution for the total syntheses of the cyclic decapeptide antibiotic Tyrocidine A and its analogues from their fully deprotected linear thioester precursors on a solid support. This novel aqueous method is conformation-dependent and may be applicable to syntheses of other natural cyclic peptides.

  20. Chemical etching investigation of polycrystalline p-type 6H-SiC in HF/Na{sub 2}O{sub 2} solutions

    Energy Technology Data Exchange (ETDEWEB)

    Gabouze, Noureddine [Silicon Technology Development Unit (UDTS), 2 Bd Frantz Fanon, B.P. 140, Algiers (Algeria); Keffous, Aissa, E-mail: ngabouze@yahoo.fr [Silicon Technology Development Unit (UDTS), 2 Bd Frantz Fanon, B.P. 140, Algiers (Algeria); Kerdja, Tahar; Belaroussi, Yasmine [Advanced Techniques Development Center (CDTA), Haouch Loukil, Baba Hassen, Algiers (Algeria)

    2009-05-15

    In this work, an experimental study on the chemical etching reaction of polycrystalline p-type 6H-SiC was carried out in HF/Na{sub 2}O{sub 2} solutions. The morphology of the etched surface was examined with varying Na{sub 2}O{sub 2} concentration, etching time, agitation speed and temperature. The surfaces of the etched samples were analyzed using scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) Fourier transform infrared spectroscopy (FT-IR) and photoluminescence. The surface morphology of samples etched in HF/Na{sub 2}O{sub 2} is shown to depend on the solution composition and bath temperature. The investigation of the HF/Na{sub 2}O{sub 2} solutions on 6H-SiC surface shows that as Na{sub 2}O{sub 2} concentration increases, the etch rate increases to reach a maximum value at about 0.5 M and then decreases. A similar behaviour has been observed when temperature of the solution is increased. The maximum etch rate is found for 80 deg. C. In addition, a new polishing etching solution of 6H-SiC has been developed. This result is very interesting since to date no chemical polishing solution has been developed on the material.

  1. Electroless Deposition of W-doped Ag Dendrites from HF Solution

    Institute of Scientific and Technical Information of China (English)

    YE Wei-Chun; MA Chuan-Li; CHANG Yan-Long; WANG Chun-Ming

    2008-01-01

    A simple method was developed for the preparation of W-doped Ag dendrites by using electroless deposition from hydrofluoride solution. The samples characterized by XPS, XRD, SEM and TEM techniques, show that the growth of silver is leading and can not be changed essentially by tungstate ions in the Ag-W binary system. A doping mode of W element was proposed, i.e., the doping of W may occur during silver deposition through chemi-sorption-chemical bonding of oxygen atoms of tungstate dimer with silver. Cyclic voltammetry was employed to determine the chemical bonding energy between silver and oxygen.

  2. Solubility of Carbon Dioxide and Hydrogen Sulfide in Aqueous N-Methyldiethanolamine Solutions

    OpenAIRE

    Huttenhuis, P. J. G.; Agrawal, N.J.; Versteeg, G. F.

    2009-01-01

    In this work, 72 new experimental solubility data points for H(2)S and CO(2) mixtures in aqueous N-methyldiethanol amine (MDEA) solutions at different methane partial pressures (up to 69 bara) are presented. They are correlated using an electrolyte equation of state (E-EOS) thermodynamic model. This model has already been used to estimate the CO(2) solubility in aqueous MDEA (Huttenhuis et al. Fluid Phase Equilib. 2008, 264, 99-112) and the H(2)S solubility in aqueous MDEA (Huttenhuis et al. ...

  3. First-principle based modeling of urea decomposition kinetics in aqueous solutions

    Science.gov (United States)

    Nicolle, André; Cagnina, Stefania; de Bruin, Theodorus

    2016-11-01

    This study aims at validating a multi-scale modeling methodology based on an implicit solvent model for urea thermal decomposition pathways in aqueous solutions. The influence of the number of cooperative water molecules on kinetics was highlighted. The obtained kinetic model is able to accurately reproduce urea decomposition in aqueous phase under a variety of experimental conditions from different research groups. The model also highlights the competition between HNCO desorption to gas phase and hydrolysis in aqueous phase, which may influence SCR depollution process operation.

  4. Biosorption of copper (II) from aqueous solution by mycelial pellets ...

    African Journals Online (AJOL)

    Syvia

    2012-01-19

    Jan 19, 2012 ... A stock solution of copper (II) was prepared by dissolving required amount of ... Reagent Co., Ltd, Shanghai, China) in double distilled water to obtain a .... through sharing or exchange of electrons between adsorbent and ...

  5. REMOVAL OF LEAD(II) IONS FROM AQUEOUS SOLUTIONS ...

    African Journals Online (AJOL)

    a

    Vishakhapatnam, Andhra Pradesh, India. 2Department of ... The pH effect and desorption studies showed that ion exchange mechanism .... The batch experiments were performed by adding the desired amount of the stock solution in. 250 mL ...

  6. REMOVAL OF Ni(II) FROM AQUEOUS SOLUTION USING LEAF ...

    African Journals Online (AJOL)

    Preferred Customer

    Elovich and intraparticle diffusion kinetic models indicating rate limiting step to be ... Environmental contamination with metal ions represents a potential threat to ..... energy of metal ions in solution also increase to make the number of metal ...

  7. Radiation induced degradation of ketoprofen in dilute aqueous solution

    Science.gov (United States)

    Illés, Erzsébet; Takács, Erzsébet; Dombi, András; Gajda-Schrantz, Krisztina; Gonter, Katalin; Wojnárovits, László

    2012-09-01

    The intermediates and final products of ketoprofen degradation were investigated in 0.4 mmol dm-3 solution by pulse radiolysis and gamma radiolysis. For observation of final products UV-vis spectrophotometry and HPLC separation with diode array detection were used, and for identification MS was used. The reactions of •OH lead to hydroxycyclohexadienyl type radical intermediates, in their further reactions hydroxylated derivatives of ketoprofen form as final products. The hydrated electron is scavenged by the carbonyl oxygen and the electron adduct protonates to ketyl radical •OH is more effective in decomposing ketoprofen than hydrated electron. Chemical oxygen demand and total organic carbon content measurements on irradiated aerated solutions showed that using irradiation technology ketoprofen can be mineralised. The initial toxicity of the solution monitored by the Daphnia magna test steadily decreases with irradiation. Using 5 kGy dose no toxicity of the solution was detected with this test.

  8. Forces between Hydrophobic Solids in Concentrated Aqueous Salt Solution

    OpenAIRE

    Mastropietro, Dean J; Ducker, William A.

    2012-01-01

    Much research has focused on the discovery and description of long-ranged forces between hydrophobic solids immersed in water. Here we show that the force between high contact-angle solids in concentrated salt solution (1 M KCl) agrees very well with van der Waals forces calculated from Lifshitz theory for separations greater than 5 nm. The hydrophobic solids are octadecyltrichlorosilane-coated glass, with an advancing contact angle of 108 degrees. Thus, in 1 M salt solution, it is unnecessar...

  9. Direct Synthesis of Nanoceria in Aqueous Polyhydroxyl Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Karakoti, A. S.; Kuchibhatla, Satyanarayana V N T; Babu, K. S.; Seal, Sudipta

    2007-11-22

    Nanoceria has been shown to possess biomedical properties which have potential use in treatment of diseases caused by reactive oxygen species (ROS) like cancer. In the present work, stability and redox changes in nanoceria in the presence of polyhydroxyl groups such as glucose and dextran is reported. The effect of both acidic and basic medium on stability of nanoceria in the absence of buffer had been examined using UV-Visible spectroscopy and transmission electron microscopy. Experimental results showed that both dextran and glucose can extend the stability of nanoceria in basic medium without interfering with the redox chemistry. A comparison of aqueous and saccharides suspension in acid/base media undergoing redox transformation has been reported.

  10. Chemical and photochemical properties of chloroharmine derivatives in aqueous solutions.

    Science.gov (United States)

    Rasse-Suriani, Federico A O; Denofrio, M Paula; Yañuk, Juan G; Gonzalez, M Micaela; Wolcan, Ezequiel; Seifermann, Marco; Erra-Balsells, Rosa; Cabrerizo, Franco M

    2016-01-14

    Thermal and photochemical stability (Φ(R)), room temperature UV-vis absorption and fluorescence spectra, fluorescence quantum yields (Φ(F)) and lifetimes (τ(F)), quantum yields of hydrogen peroxide (Φ(H2O2)) and singlet oxygen (Φ(Δ)) production, and triplet lifetimes (τ(T)) have been obtained for the neutral and protonated forms of 6-chloroharmine, 8-chloroharmine and 6,8-dichloroharmine, in aqueous media. When it was possible, the effect of pH and oxygen concentration was evaluated. The nature of electronic transitions of protonated and neutral species of the three investigated chloroharmines was established using Time-Dependent Density Functional Theory (TD-DFT) calculations. The impact of all the foregoing observations on the biological role of the studied compounds is discussed.

  11. Volatile release from aqueous solutions under dynamic headspace dilution conditions.

    Science.gov (United States)

    Marin, M; Baek, I; Taylor, A J

    1999-11-01

    Static equilibrium was established between the gas phase (headspace) and an unstirred aqueous phase in a sealed vessel. The headspace was then diluted with air to mimic the situation when a container of food is opened and the volatiles are diluted by the surrounding air. Because this first volatile signal can influence overall flavor perception, the parameters controlling volatile release under these conditions are of interest. A mechanistic model was developed and validated experimentally. Release of compounds depended on the air-water partition coefficient (K(aw)) and the mass transport in both phases. For compounds with K(aw) values 10(-)(3), mass transport in the gas phase became significant and the Reynolds number played a role. Because release from packaged foods occurs at low Reynolds numbers, whereas most experiments are conducted at medium to high Reynolds numbers, the experimentally defined profile may not reflect the real situation.

  12. Oxidation of aqueous HF-treated Si(001) surface induced by translational kinetic energy of O sub 2 at room temperature

    CERN Document Server

    Yoshigoe, A

    2003-01-01

    The oxidation induced by the translational kinetic energy of O sub 2 on the Si(001) surface treated with HF solution were investigated by combining synchrotron radiation photoemission spectroscopy with the supersonic molecular beam techniques. The oxidation at room temperature did not progress up to 3600 L of O sub 2 exposure with incident energy of 0.04 eV, whereas the oxidation states of up to Si sup 4 sup + species were formed in the case of 3.0 eV. The oxide-layer thickness was estimated to be 0.26 nm at the final oxidation stages. We concluded that the Si atoms at the top layers were oxidized by the incident energy of 3.0 eV.

  13. Adsorptive Removal of Acid Blue 80 Dye from Aqueous Solutions by Cu-TiO2

    OpenAIRE

    Ingrid Johanna Puentes-Cárdenas; Griselda Ma. Chávez-Camarillo; César Mateo Flores-Ortiz; María del Carmen Cristiani-Urbina; Alma Rosa Netzahuatl-Muñoz; Juan Carlos Salcedo-Reyes; Aura Marina Pedroza-Rodríguez; Eliseo Cristiani-Urbina

    2016-01-01

    The adsorption performance of a Cu-TiO2 composite for removing acid blue 80 (AB80) dye from aqueous solutions was investigated in terms of kinetics, equilibrium, and thermodynamics. The effect of operating variables, such as solution pH, initial dye concentration, contact time, and temperature, on AB80 adsorption was studied in batch experiments. AB80 adsorption increased with increasing contact time, initial dye concentration, and temperature and with decreasing solution pH. Modeling of adso...

  14. Electrochemical characteristics of dodecylbenzene sulfonic acid-doped polyaniline in aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Choi, B.Y. [Korea Electr. Power Res. Inst., Taejon (Korea, Republic of). Power Utilization Group; Chung, I.J. [Department of Chemical Engineering, Korea Advanced Institute of Science and Technology, 373-1 Kusong Yusong, Taejon 305-701 (Korea, Republic of); Chun, J.H.; Ko, J.M. [Department of Industrial Chemistry, Taejon National University of Technology, 305-3, Samsung-2 dong, Dong-gu, Taejon 300-717 (Korea, Republic of)

    1999-02-26

    The electrochemical characteristics of the polyaniline (PAn) films doped with dodecylbenzene sulfonic acid (DBSA) were investigated in aqueous solutions by means of cyclic voltammetry. The PAn-DBSAs film showed a good electrochemical activity in a weak acid solution as well as in a strong acid solution due to the incorporation of small cation instead of DBSA trapped in the film for charge neutralization of polymer matrix. (orig.) 39 refs.

  15. The standard enthalpies of formation of crystalline N-(carboxymethyl)aspartic acid and its aqueous solutions

    Science.gov (United States)

    Lytkin, A. I.; Chernyavskaya, N. V.; Volkov, A. V.; Nikol'Skii, V. M.

    2007-07-01

    The energy of combustion of N-(carboxymethyl)aspartic acid (CMAA) was determined by bomb calorimetry in oxygen. The standard enthalpies of combustion and formation of crystalline N-(carboxymethyl)aspartic acid were calculated. The heat effects of solution of crystalline CMAA in water and a solution of sodium hydroxide were measured at 298.15 K by direct calorimetry. The standard enthalpies of formation of CMAA and its dissociation products in aqueous solution were determined.

  16. Changes in the color, chemical stability and antioxidant capacity of thermally treated anthocyanin aqueous solution over storage.

    Science.gov (United States)

    Sui, Xiaonan; Bary, Solène; Zhou, Weibiao

    2016-02-01

    Many anthocyanin-containing foods are thermally processed to ensure their safety, and stored for some time before being consumed. However, the combination of thermal processing and subsequent storage has a significant impact on anthocyanins. This study aimed to investigate the color, chemical stability, and antioxidant capacity of thermally treated anthocyanin aqueous solutions during storage at 4, 25, 45, and 65 °C, respectively. Anthocyanin aqueous solutions were thermally treated before storage. Results showed that the degradation rate of anthocyanins in aqueous solutions was much faster than those in real food. The color of the anthocyanin aqueous solutions changed dramatically during storage. The anthocyanin aqueous solutions stored at 4 °C showed the best chemical stability. Interestingly, the antioxidant capacity of the anthocyanin aqueous solutions stored at lower temperatures remained the same; however, the antioxidant capacity of those thermally treated at 120 or 140 °C and stored at 45 or 65 °C significantly decreased.

  17. The Removal of Dye from Aqueous Solution by Adsorption on Low Cost Adsorbents

    Directory of Open Access Journals (Sweden)

    J. J. Chamargore

    2010-01-01

    Full Text Available Removal of color from aqueous solution by using low cost easily available adsorbent was conducted by batch experiment. The potential of the low cost adsorbent (Marble powder-treated and untreated to remove methylene red from aqueous solution were assessed at room temperature. Laboratory investigation of the potential of marble powder and sulphuric acid treated marble powder to remove dye color from aqueous solution has been studied. Parameters studied included pH, adsorbent dose, initial dye concentration and contact time. The influence of these system variables were investigated to observe the effect on the rate of dye uptake. Sulphuric acid treated marble powder has shown better adsorptive capacity than untreated marble powder and thus it has become an interesting option for dye removal from industrial effluents.

  18. Performance investigation of heat pipe using aqueous solution of n-Pentanol with different inclinations

    Energy Technology Data Exchange (ETDEWEB)

    Senthilkumar, R.; Vaidyanathan, S.; Sivaraman, B. [Annamalai University, Tamil Nadu (India)

    2011-04-15

    The orientation of the heat pipe plays the significant role in its performance. In specific orientations, the performance of the heat pipe is directly related to the wick structure. In conventional heat pipe, the working fluid is used a negative surface-tension gradient with temperature. It is an unfavorable one and it decreases the heat transport between the evaporator section and the condenser section. An Aqueous solution of n-Pentanol having a positive surface tension gradient with temperature is suggested as a working medium for heat pipe to improve the performance of capillary limit and operating stability. The objective of this paper is to perform a comparative study of heat pipe performance using the aqueous solution of n-Pentanol with water at various inclinations. The results are presented to demonstrate the merits and suitability of the aqueous solution of n-Pentanol as a working fluid for heat pipe.

  19. Fluoresence quenching of riboflavin in aqueous solution by methionin and cystein

    Energy Technology Data Exchange (ETDEWEB)

    Droessler, P.; Holzer, W.; Penzkofer, A.; Hegemann, P

    2003-01-15

    The fluorescence quantum distributions, fluorescence quantum yields, and fluorescence lifetimes of riboflavin in methanol, DMSO, water, and aqueous solutions of the sulphur atom containing amino acids methionin and cystein have been determined. In methanol, DMSO, and water (pH=4-8) only dynamic fluorescence reduction due to intersystem crossing and internal conversion is observed. In aqueous methionin solutions of pH=5.25-9 a pH independent static and dynamic fluorescence quenching occurs probably due to riboflavin anion-methionin cation pair formation. In aqueous cystein solutions (pH range from 4.15 to 9) the fluorescence quenching increases with rising pH due to cystein thiolate formation. The cystein thiol form present at low pH does not react with neutral riboflavin. Cystein thiolate present at high pH seems to react with neutral riboflavin causing riboflavin deprotonation (anion formation) by cystein thiolate reduction to the cystein thiol form.

  20. Fluoresence quenching of riboflavin in aqueous solution by methionin and cystein

    Science.gov (United States)

    Drössler, P.; Holzer, W.; Penzkofer, A.; Hegemann, P.

    2003-01-01

    The fluorescence quantum distributions, fluorescence quantum yields, and fluorescence lifetimes of riboflavin in methanol, DMSO, water, and aqueous solutions of the sulphur atom containing amino acids methionin and cystein have been determined. In methanol, DMSO, and water (pH=4-8) only dynamic fluorescence reduction due to intersystem crossing and internal conversion is observed. In aqueous methionin solutions of pH=5.25-9 a pH independent static and dynamic fluorescence quenching occurs probably due to riboflavin anion-methionin cation pair formation. In aqueous cystein solutions (pH range from 4.15 to 9) the fluorescence quenching increases with rising pH due to cystein thiolate formation. The cystein thiol form present at low pH does not react with neutral riboflavin. Cystein thiolate present at high pH seems to react with neutral riboflavin causing riboflavin deprotonation (anion formation) by cystein thiolate reduction to the cystein thiol form.

  1. Reversible Sol-Gel Transitions in Aqueous Solutions of N-Isopropylacrylamide Ionic Copolymers

    Energy Technology Data Exchange (ETDEWEB)

    Krzyminski, Karol J.; Jasionowski, Marek; Gutowska, Anna

    2008-04-01

    Ionic copolymers of N-isopropylacrylamide (NIPA) exhibiting sol-gel transitions in aqueous solutions were investigated. The studies were aimed at understanding of the structure-property relationship in design of injectable, in situ forming gels for potential biomedical applications in delivery of therapeutics and tissue engineering. Aqueous solutions of NIPA ionic copolymers were found to flow freely at ambient temperatures and formed soft gels with controlled syneresis above 32°C, the lower critical solution temperature of NIPA. The sol-gel transitions and temperature dependent properties of the resulting gels were analyzed using dynamic rheometry, UV and IR spectrometry, and were found to be controlled by the molecular weight and composition of copolymers, ionization state of comonomers, and composition of aqueous solvent.

  2. Adsorption of Pb2+, Zn2+ and Ni2+ from Aqueous Solution by Helix aspera Shell

    Directory of Open Access Journals (Sweden)

    A. S. Ekop

    2009-01-01

    Full Text Available The adsorption capacity of Helix aspera shell for Pb2+, Zn2+ and Ni2+ has been studied. This shell has the potential of adsorbing Pb2+, Zn2+ and Ni2+ from aqueous solution. The adsorption potentials of Helix aspera shell is largely influenced by the ionic character of the ions and occurred according to the order Pb2+ > Ni2+ > Zn2+. The adsorption of Pb(II, Zn(II and Ni(II ions from aqueous solutions by Helix aspera shell is thermodynamically feasible and is consistent with the models of Langmuir and Freundlich adsorption isotherms. From the results of the study, the shell of Helix aspera is recommended for use in the removal of Pb2+, Zn2+ and Ni2+ from aqueous solution.

  3. Sorption of ochratoxin A from aqueous solutions using β-cyclodextrin-polyurethane polymer.

    Science.gov (United States)

    Appell, Michael; Jackson, Michael A

    2012-02-01

    The ability of a cyclodextrin-polyurethane polymer to remove ochratoxin A from aqueous solutions was examined by batch rebinding assays. The results from the aqueous binding studies were fit to two parameter models to gain insight into the interaction of ochratoxin A with the nanosponge material. The ochratoxin A sorption data fit well to the heterogeneous Freundlich isotherm model. The polymer was less effective at binding ochratoxin A in high pH buffer (9.5) under conditions where ochratoxin A exists predominantly in the dianionic state. Batch rebinding assays in red wine indicate the polymer is able to remove significant levels of ochratoxin A from spiked solutions between 1-10 μg·L(-1). These results suggest cyclodextrin nanosponge materials are suitable to reduce levels of ochratoxin A from spiked aqueous solutions and red wine samples.

  4. Microwave-Based Microfluidic Sensor for Non-Destructive and Quantitative Glucose Monitoring in Aqueous Solution

    Directory of Open Access Journals (Sweden)

    Thomas Chretiennot

    2016-10-01

    Full Text Available This paper presents a reliable microwave and microfluidic miniature sensor dedicated to the measurement of glucose concentration in aqueous solution. The device; which is integrated with microtechnologies; is made of a bandstop filter implemented in a thin film microstrip technology combined with a fluidic microchannel. Glucose aqueous solutions have been characterized for concentration ranging from 80 g/L down to 0.3 g/L and are identified with the normalized insertion loss at optimal frequency. The sensitivity of the sensor has consequently been estimated at 7.6 × 10−3 dB/(g/L; together with the experimental uncertainty; the resolution of the sensor comes to 0.4 g/L. These results demonstrate the potentialities of such a sensor for the quantitative analysis of glucose in aqueous solution.

  5. APPLICATION OF NONIONIC TEMPERATURE SENSITIVE HYDROGEL FOR CONCENTRATION OF PROTEIN AQUEOUS SOLUTION

    Institute of Scientific and Technical Information of China (English)

    SUN Yishi; QIU Zhiyong; HONG Yaoliang

    1992-01-01

    Six different N-alkyl substituted acrylamide nonionic hydrogels were prepared and their swelling characteristics were measured. Poly N-isopropyl acrylamide (PNIPA) and poly N-n-propylacrylamide (PNNPA) temperature sensitive hydrogels were chosen as the nonionic temperature sensitive hydrogels for concentration of very dilute aqueous protein solution. The separation properties of PNIPA and PNNPA hydrogels with different network dimensions were studied and the modification of the hydrogels was surveyed in order to decrease their surface adsorption of protein molecules. The experimental results of the concentration of BSA (Bovin serum albumin) dilute aqueous solution by hydroxylpropyl methacrylate (HPMA) copolymerized PNIPA hydrogel were given. The value and the limitation of concentration of dilute aqueous protein solution by this method was evaluated.

  6. Adsorption of Polycyclic Aromatic Hydrocarbons (PAHS from Aqueous Solutions on Different Sorbents

    Directory of Open Access Journals (Sweden)

    Smol Marzena

    2014-12-01

    Full Text Available This paper presents the results of the possibility and effectiveness of PAHs removal from a model aqueous solution, during the sorption on the selected sorbents. Six PAHs (naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene listed by EPA for the analysis in the environmental samples were determined. Model aqueous solution was prepared with RESTEK 610 mix PAHs standard. After the sorption process, decrease in the concentration of individual hydrocarbons was observed. The removal percentage was dependent on the type of sorbent (quartz sand, mineral sorbent, activated carbon. The highest efficiency (98.1% was observed for activated carbon.. The results shows that the sorption processes can be used in aqueous solutions treatment procedures.

  7. Osmotic Second Virial Coefficients of Aqueous Solutions from Two-Component Equations of State.

    Science.gov (United States)

    Cerdeiriña, Claudio A; Widom, B

    2016-12-29

    Osmotic second virial coefficients in dilute aqueous solutions of small nonpolar solutes are calculated from three different two-component equations of state. The solutes are five noble gases, four diatomics, and six hydrocarbons in the range C1-C4. The equations of state are modified versions of the van der Waals, Redlich-Kwong, and Peng-Robinson equations, with an added hydrogen-bonding term for the solvent water. The parameters in the resulting equations of state are assigned so as to reproduce the experimental values and temperature dependence of the density, vapor pressure, and compressibility of the solvent, the gas-phase second virial coefficient of the pure solute, the solubility and partial molecular volume of the solute, and earlier estimates of the solutes' molecular radii. For all 15 solutes, the calculations are done for 298.15 K, whereas for CH4, C2H6, and C3H8 in particular, they are also done as functions of temperature over the full range 278.15-348.15 K. The calculated osmotic virial coefficients are compared with earlier calculations of these coefficients for these solutes and also with the results derived from earlier computer simulations of model aqueous solutions of methane. They are also compared with the experimental gas-phase second virial coefficients of the pure gaseous solutes to determine the effect the mediation of the solvent has on the resulting solute-solute interactions in the solution.

  8. Detecting the Biopolymer Behavior of Graphene Nanoribbons in Aqueous Solution

    Science.gov (United States)

    Wijeratne, Sithara S.; Penev, Evgeni S.; Lu, Wei; Li, Jingqiang; Duque, Amanda L.; Yakobson, Boris I.; Tour, James M.; Kiang, Ching-Hwa

    2016-01-01

    Graphene nanoribbons (GNR), can be prepared in bulk quantities for large-area applications by reducing the product from the lengthwise oxidative unzipping of multiwalled carbon nanotubes (MWNT). Recently, the biomaterials application of GNR has been explored, for example, in the pore to be used for DNA sequencing. Therefore, understanding the polymer behavior of GNR in solution is essential in predicting GNR interaction with biomaterials. Here, we report experimental studies of the solution-based mechanical properties of GNR and their parent products, graphene oxide nanoribbons (GONR). We used atomic force microscopy (AFM) to study their mechanical properties in solution and showed that GNR and GONR have similar force-extension behavior as in biopolymers such as proteins and DNA. The rigidity increases with reducing chemical functionalities. The similarities in rigidity and tunability between nanoribbons and biomolecules might enable the design and fabrication of GNR-biomimetic interfaces. PMID:27503635

  9. Radiolysis of Reactive Azo Dyes in Aqueous Solution

    Directory of Open Access Journals (Sweden)

    Agustin N.M. Bagyo

    2004-07-01

    Full Text Available The effects of radiation on aerated reactive dye solutions i.e Cibacron Violet, Cibacron Orange and Cibacron Yellow solutions have been studied. Parameters analysis were the change of pH after radiation, the change of absorption, degradation products and effects of pH on the radiolysis. The uv-vis absorption of solutions were observed before and after irradiation. pH variation was done from pHs 3, 5, 7, 9 and 12. Irradiation was done at doses of 0, 2, 4, 6, 8 and 10 kGy with dose rate of 5 kGy/h and was determined by a Fricke dosimeter. HPLC with UV detector was used to analyze the degradation products. Oxalic acid was the main degradation product and small amount of succinic acid was also detected.

  10. Detecting the Biopolymer Behavior of Graphene Nanoribbons in Aqueous Solution

    Science.gov (United States)

    Wijeratne, Sithara S.; Penev, Evgeni S.; Lu, Wei; Li, Jingqiang; Duque, Amanda L.; Yakobson, Boris I.; Tour, James M.; Kiang, Ching-Hwa

    2016-08-01

    Graphene nanoribbons (GNR), can be prepared in bulk quantities for large-area applications by reducing the product from the lengthwise oxidative unzipping of multiwalled carbon nanotubes (MWNT). Recently, the biomaterials application of GNR has been explored, for example, in the pore to be used for DNA sequencing. Therefore, understanding the polymer behavior of GNR in solution is essential in predicting GNR interaction with biomaterials. Here, we report experimental studies of the solution-based mechanical properties of GNR and their parent products, graphene oxide nanoribbons (GONR). We used atomic force microscopy (AFM) to study their mechanical properties in solution and showed that GNR and GONR have similar force-extension behavior as in biopolymers such as proteins and DNA. The rigidity increases with reducing chemical functionalities. The similarities in rigidity and tunability between nanoribbons and biomolecules might enable the design and fabrication of GNR-biomimetic interfaces.

  11. RECOVERY OF THORIUM AND URANIUM VALUES FROM AQUEOUS SOLUTIONS

    Science.gov (United States)

    Calkins, G.D.

    1958-02-18

    This patent deals with the separation and recovery of uranium from monazite sand. After initial treatment of the sand with sodium hydroxide, a precipitate is obtuined which contains the uranium, thorium, rare earths and some phosphorus. This precipitate is then dissolved in nitric acid. The bulk of the rare earths are removed from thls soiution by adding aa excess of alkali carbonate, causing precipitation of the rare earths together with part of the thorium present. The solution still contains a considerable amount of thorium, some rare earths, and practically all of the uranium originally present. Thorium and rare earth values are readily precipitated from such solution, and the uranium values thus isolated, by the addition of an excess hydrogen peroxide. The pH value of the solution is preferably adjusted to at least 9 prior to the addition of the peroxide.

  12. Partition Equilibrium Between Charged Membrane and Single Electrolyte Aqueous Solution

    Institute of Scientific and Technical Information of China (English)

    徐铜文; 杨伟华; 何柄林

    2001-01-01

    Ionic partition equilibrium in charged membrane immersed in solution of single electrolyte with monovalence or multi-valence is systematically investigated and several expressions are established for determination of partition coefficients. On this basis, the effects of the ratio of membrane charge density to hulk electrolyte solution concentration, the charge sign and valence of electrolyte ions and the type of membrane on the partition equilibrium were analyzed and simulated with in chosen parameters. It is revealed that ion partition is not related solely withthe respective concentrations but also definitely with the concentration ratio of fixed group to bulk solution in addition to the charge sign and the valence. For a counterion, the partition coefficient increases with this ratio and the valence; while for a coion, the partition coefficient decreases with this ratio and the valence. The theoreticalcal culations were compared with the experimental data and a good agreement was observed.

  13. Partition Equilibrium Between Charged Membrane and Single Electrolyte Aqueous Solution

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Ionic partition equilibrium in charged membrane immersed in solution of single electrolyte with mono valence or multi-valence is systematically investigated and several expressions are established for determination of partition coefficients. On this basis, the effects of the ratio of membrane charge density to bulk electrolyte solution concentration, the charge sign and valence of electrolyte ions and the type of membrane on the partition equilibrium were analyzed and simulated within chosen parameters. It is revealed that ion partition is not related solely with the respective concentrations but also definitely with the concentration ratio of fixed group to bulk solution in addition to the charge sign and the valence. For a counterion, the partition coefficient increases with this ratio and the valence; while for a coion, the partition coefficient decreases with this ratio and the valence. The theoretical calculations were compared with the experimental data and a good agreement was observed.

  14. The solubility of toluene in aqueous salt solutions.

    Science.gov (United States)

    Poulson, S; Harrington, R; Drever, J

    1999-03-01

    The solubility of toluene has been measured in distilled water, and in various inorganic salt solutions. Values of the Setschenow constant, K(S), which quantify toluene solubility versus salt concentration, have been determined for each salt. Values of K(S) are compared to the activity of water for the salt solutions. Data from this study, consistent with earlier data, suggests that the effects of salts upon toluene solubility are non-additive. This contrasts the additive behavior of inorganic salts upon the solubility of nonpolar organic compounds, such as benzene and naphthalene, reported in the literature. Specific interaction between slightly polar toluene and ions in solution is suggested as a possible explanation for the non-additive effect of salts on the solubility of toluene.

  15. Forces between hydrophobic solids in concentrated aqueous salt solution.

    Science.gov (United States)

    Mastropietro, Dean J; Ducker, William A

    2012-03-09

    Much research has focused on the discovery and description of long-ranged forces between hydrophobic solids immersed in water. Here we show that the force between high contact-angle solids in concentrated salt solution (1 M KCl) agrees very well with van der Waals forces calculated from Lifshitz theory for separations greater than 5 nm. The hydrophobic solids are octadecyltrichlorosilane-coated glass, with an advancing contact angle of 108°. Thus, in 1 M salt solution, it is unnecessary to invoke the presence of a hydrophobic force at separations greater than 5 nm. Through measurement in salt solution, we avoid the necessity of accounting for large electrostatic forces that frequently occur in pure water and may obscure resolution of other forces.

  16. Bi-assisted chemical etching of silicon in HF/Co(NO{sub 3}){sub 2} solution

    Energy Technology Data Exchange (ETDEWEB)

    Megouda, N. [Faculte des Sciences, Universite Mouloud Mammeri, Tizi-Ouzou (Algeria); Hadjersi, T. [Unite de Developpement de la Technologie du Silicium (UDTS), 2, Bd. Frantz Fanon, B.P. 140 Alger-7 merveilles, Alger (Algeria)], E-mail: hadjersi@yahoo.com; Elkechai, O.; Douani, R. [Faculte des Sciences, Universite Mouloud Mammeri, Tizi-Ouzou (Algeria); Guerbous, L. [Centre de Recherche Nucleaire d' Alger (CRNA) COMENA 2, Bd. Frantz Fanon, Alger (Algeria)

    2009-03-15

    The morphology and the photoluminescence (PL) of Bi-assisted electroless etched p-type silicon in HF-Co(NO{sub 3}){sub 2}-H{sub 2}O solution as a function of etching time were studied. The scanning electron microscopy (SEM) observations have shown that the morphology of etched layers strongly depends on the etching time and it was observed that macropores filled with silicon crystallites are formed for etching time higher than 50 min. Moreover, it was found that the PL spectra show a red emission with a peak centred at 640 nm. The PL peak intensity reaches a maximum for etching time of 50 min, and then it decreases with increasing etching time. The Fourier transform infrared (FTIR) measurements have shown a strong increase in intensities of the relevant Si-H and in the amount of oxide (absorption band at 1070 cm{sup -1}) for long etching time which was ascribed to an increase in the number of Si crystallites formed in the macropores.

  17. Selected specific rates of reactions of transients from water in aqueous solution. Hydrated electron, supplemental data. [Reactions with transients from water, with inorganic solutes, and with solutes

    Energy Technology Data Exchange (ETDEWEB)

    Ross, A.B.

    1975-06-01

    A compilation of rates of reactions of hydrated electrons with other transients and with organic and inorganic solutes in aqueous solution appeared in NSRDS-NBS 43, and covered the literature up to early 1971. This supplement includes additional rates which have been published through July 1973.

  18. Electrogenerated chemiluminescence induced by sequential hot electron and hole injection into aqueous electrolyte solution

    Energy Technology Data Exchange (ETDEWEB)

    Salminen, Kalle; Kuosmanen, Päivi; Pusa, Matti [Aalto University, Department of Chemistry, Laboratory of Analytical Chemistry, P.O. Box 16100, FI-00076 Aalto (Finland); Kulmala, Oskari [University of Helsinki, Department of Physics, P.O. Box 64, FI-00014 (Finland); Håkansson, Markus [Aalto University, Department of Chemistry, Laboratory of Analytical Chemistry, P.O. Box 16100, FI-00076 Aalto (Finland); Kulmala, Sakari, E-mail: sakari.kulmala@aalto.fi [Aalto University, Department of Chemistry, Laboratory of Analytical Chemistry, P.O. Box 16100, FI-00076 Aalto (Finland)

    2016-03-17

    Hole injection into aqueous electrolyte solution is proposed to occur when oxide-coated aluminum electrode is anodically pulse-polarized by a voltage pulse train containing sufficiently high-voltage anodic pulses. The effects of anodic pulses are studied by using an aromatic Tb(III) chelate as a probe known to produce intensive hot electron-induced electrochemiluminescence (HECL) with plain cathodic pulses and preoxidized electrodes. The presently studied system allows injection of hot electrons and holes successively into aqueous electrolyte solutions and can be utilized in detecting electrochemiluminescent labels in fully aqueous solutions, and actually, the system is suggested to be quite close to a pulse radiolysis system providing hydrated electrons and hydroxyl radicals as the primary radicals in aqueous solution without the problems and hazards of ionizing radiation. The analytical power of the present excitation waveforms are that they allow detection of electrochemiluminescent labels at very low detection limits in bioaffinity assays such as in immunoassays or DNA probe assays. The two important properties of the present waveforms are: (i) they provide in situ oxidation of the electrode surface resulting in the desired oxide film thickness and (ii) they can provide one-electron oxidants for the system by hole injection either via F- and F{sup +}-center band of the oxide or by direct hole injection to valence band of water at highly anodic pulse amplitudes. - Highlights: • Hot electrons injected into aqueous electrolyte solution. • Generation of hydrated electrons. • Hole injection into aqueous electrolyte solution. • Generation of hydroxyl radicals.

  19. Simultaneous leaching and carbon sequestration in constrained aqueous solutions.

    Science.gov (United States)

    Moon, Ji-Won; Cho, Kyu-Seong; Moberly, James G; Roh, Yul; Phelps, Tommy J

    2011-12-01

    The behavior of metal ions' leaching and precipitated mineral phases of metal-rich fly ash (FA) was examined in order to evaluate microbial impacts on carbon sequestration and metal immobilization. The leaching solutions consisted of aerobic deionized water (DW) and artificial eutrophic water (AEW) that was anaerobic, organic- and mineral-rich, and higher salinity as is typical of bottom water in eutrophic algae ponds. The Fe- and Ca-rich FAs were predominantly composed of quartz, mullite, portlandite, calcite, hannebachite, maghemite, and hematite. After 86 days, only Fe and Ca contents exhibited a decrease in leaching solutions while other major and trace elements showed increasing or steady trends in preference to the type of FA and leaching solution. Ca-rich FA showed strong carbon sequestration efficiency ranging up to 32.3 g CO(2)/kg FA after 86 days, corresponding to almost 65% of biotic carbon sequestration potential under some conditions. Variations in the properties of FAs such as chemical compositions, mineral constituents as well as the type of leaching solution impacted CO(2) capture. Even though the relative amount of calcite increased sixfold in the AEW and the relative amount of mineral phase reached 37.3 wt% using Ca-rich FA for 86 days, chemical sequestration did not accomplish simultaneous precipitation and sequestration of several heavy metals.

  20. Simultaneous leaching and carbon sequestration in constrained aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Phelps, Tommy Joe [ORNL; Moon, Ji Won [ORNL; Roh, Yul [Chonnam National University, Gwangju; Cho, Kyu Seong [ORNL

    2011-01-01

    The behavior of metal ions leaching and precipitated mineral phases of metal-rich fly ash (FA) was examined in order to evaluate microbial impacts on carbon sequestration and metal immobilization. The leaching solutions consisted of aerobic deionized water (DW) and artificial eutrophic water (AEW) that was anaerobic, organic- and mineral-rich, and higher salinity as is typical of bottom water in eutrophic algae ponds. The Fe- and Ca-rich FAs were predominantly composed of quartz, mullite, portlandite, calcite, hannebachite, maghemite, and hematite. After 86 days, only Fe and Ca contents exhibited a decrease in leaching solutions while other major and trace elements showed increasing or steady trends in preference to the type of FA and leaching solution. Ca-rich FA showed strong carbon sequestration efficiency ranging up to 32.3 g CO(2)/kg FA after 86 days, corresponding to almost 65% of biotic carbon sequestration potential under some conditions. Variations in the properties of FAs such as chemical compositions, mineral constituents as well as the type of leaching solution impacted CO(2) capture. Even though the relative amount of calcite increased sixfold in the AEW and the relative amount of mineral phase reached 37.3 wt% using Ca-rich FA for 86 days, chemical sequestration did not accomplish simultaneous precipitation and sequestration of several heavy metals.

  1. Cooling and Freezing Behaviors of Aqueous Sodium Chloride Solution in a Closed Rectangular Container

    Science.gov (United States)

    Narumi, Akira; Kashiwagi, Takao; Nakane, Ichirou

    This paper investigates cooling and freezing behaviors of NaCl aqueous solution in a rectangular container equipped with horizontal partitions of micro porous film in order to determine the mechanisms of heat and mass transfer through cell wall for the purpose of freezing food. For comparison, experiments were performed using partitions of copper plate, no partition, and water. These processes were visualized and measured using real-time laser holographic interferometry. It was found that there was very little difference in the cooling process due to partitions, but that there were significant differences in freezing process when NaCl aqueous solution is used.

  2. Volumetric and Transport Properties of Aqueous NaB(OH)4 Solutions

    Institute of Scientific and Technical Information of China (English)

    周永全; 房春晖; 房艳; 朱发岩

    2013-01-01

    Density, pH, viscosity, conductivity and the Raman spectra of aqueous NaB(OH)4 solutions precisely measured as functions of concentration at different temperatures (293.15, 298.15, 303.15, 313.15 and 323.15 K) are presented. Polyborate distributions in aqueous NaB(OH)4 solution were calculated, covering all the concentration range, 4B(OH)− is the most dominant species, other polyborate anions are less than 5.0%. The volumetric and the transport properties were discussed in detail, both of these properties indicate that 4B(OH)− behaves as a struc-ture-disordered anion.

  3. Pinning of phase separation of aqueous solution of hydroxypropylmethylcellulose by gelation

    Science.gov (United States)

    Kita, Rio; Kaku, Takeshi; Kubota, Kenji; Dobashi, Toshiaki

    1999-08-01

    Opalescence of the aqueous solution of hydroxypropylmethylcellulose (HPMC) induced by heating has been studied in terms of the phase diagram and the phase separation dynamics. The cloud point curve and the sol-to-gel transition curve intersected with each other at about 55 °C. Just above the cloud-point curve at which the spinodal curve has its minimum, a ring-like scattering pattern appeared corresponding to the spinodal decomposition. Temporal growth of the scattering function in the course of phase separation was studied by a time-resolved light scattering technique. The gelation pinned the phase separation (spinodal decomposition) of the aqueous HPMC solution.

  4. Adsorption of Pb2+, Zn2+ and Ni2+ from Aqueous Solution by Helix aspera Shell

    OpenAIRE

    A. S. Ekop; Eddy, N. O.

    2009-01-01

    The adsorption capacity of Helix aspera shell for Pb2+, Zn2+ and Ni2+ has been studied. This shell has the potential of adsorbing Pb2+, Zn2+ and Ni2+ from aqueous solution. The adsorption potentials of Helix aspera shell is largely influenced by the ionic character of the ions and occurred according to the order Pb2+ > Ni2+ > Zn2+. The adsorption of Pb(II), Zn(II) and Ni(II) ions from aqueous solutions by Helix aspera shell is thermodynamically feasible and is consistent with the models of La...

  5. Photocatalytic and photoelectrochemical oxidation mechanisms of methanol on TiO2 in aqueous solution

    Science.gov (United States)

    Ahmed, Amira Y.; Kandiel, Tarek A.; Ivanova, Irina; Bahnemann, Detlef

    2014-11-01

    Methanol is an available, small, and colorless molecule, which can be used for the photocatalytic activity evaluation without the sensitization problem associated with most dye molecules. Thus, TiO2 suspended in aqueous methanol solutions is commonly employed as a model test for the photocatalytic degradation of organic pollutants in aerobic system or for photocatalytic hydrogen production in absence of molecular oxygen. It is, hence, important to explore the mechanism of its photocatalytic and photoelectrochemical oxidation on TiO2 in aqueous solution. In this mini-review, the possible mechanisms for water and methanol oxidation on TiO2 will therefore be presented and discussed.

  6. Study of Penetration Kinetics of Sodium Hydroxide Aqueous Solution into Wood Samples

    Directory of Open Access Journals (Sweden)

    Lubomír Lapčík

    2013-12-01

    Full Text Available The kinetics of unidirectional penetration of NaOH aqueous solution into rectangular samples of wood oriented parallel to a stern axis were studied. Scots pine (Pinus sylvestris, European larch (Larix decidua, blackthorn (Prunus spinosa, white willow (Salix alba, and horse-chestnut wood (Aesculus hippocastanum were studied in this work. The time dependence of liquid incorporation was measured by the volumetric method as a change of total volume of coexisting liquid (NaOH/H2O phase. The total thickness of the swollen surface layer d and mean value of the apparent diffusion coefficient of aqueous NaOH solution at 22 °C were determined.

  7. Label-free monitoring of interaction between DNA and oxaliplatin in aqueous solution by terahertz spectroscopy

    Science.gov (United States)

    Wu, Xiaojun; E, Yiwen; Xu, Xinlong; Wang, Li

    2012-07-01

    We demonstrated the feasibility of applying terahertz time-domain spectroscopy (THz-TDS) to monitor the molecular reactions in aqueous solutions of anticancer drug oxaliplatin with λ-DNA and macrophages DNA. The reaction time dependent refractive index and absorption coefficient were extracted and analyzed. The reaction half-decaying time of about 4.0 h for λ-DNA and 12.9 h for M-DNA was established. The results suggest that the THz-TDS detection could be an effective label-free technique to sense the molecular reaction in aqueous solutions and could be very useful in biology, medicine, and pharmacy industry.

  8. Removal of biological stains from aqueous solution using a flow-through decontamination procedure.

    Science.gov (United States)

    Lunn, G; Klausmeyer, P J; Sansone, E B

    1994-01-01

    Chromatography columns filled with Amberlite XAD-16 were used to decontaminate, using a continuous flow-through procedure, aqueous solutions of the following biological stains: acridine orange, alcian blue 8GX, alizarin red S, azure A, azure B, brilliant blue G, brilliant blue R, Congo red, cresyl violet acetate, crystal violet, eosin B, eosin Y, erythrosin B, ethidium bromide, Giemsa stain, Janus green B, methylene blue, neutral red, nigrosin, orcein, propidium iodide, rose Bengal, safranine O, toluidine blue O, and trypan blue. Adsorption was most efficient for stains of lower molecular weight (removing stains from aqueous solution.

  9. Delayed luminescence induced by complex domains in water and in aqueous solutions

    CERN Document Server

    Colleoni, C; Grasso, R; Gulino, M; Musumeci, F; Romeli, D; Rosace, G; Salesi, G; Scordino, A

    2016-01-01

    Many recent studies on water have conjectured a complex structure composed of hydrogen bonded low- and high-density domains. In this work the structure of pure water and aqueous solutions of silica gel (TEOS) has been investigated by using delayed luminescence, which previously have showed significant increase in aqueous salt solutions where low-density domain formation is expected. Photon emission shows an Arrhenius trend with an activation energy in water-TEOS solutions larger than in pure water and salt-water solutions. Moreover, delayed photon emission decay shows an intrinsic lifetime of about 5 microseconds both in solutions and in pure water that, along with secondary lifetimes induced by the presence of TEOS, could be related to the formation of different domains.

  10. Ludwig-Soret effect of non-ionic surfactant aqueous solution studied by beam deflection method

    Science.gov (United States)

    Maeda, Kousaku; Kita, Rio; Shinyashiki, Naoki; Yagihara, Shin

    2013-02-01

    We have studied the thermal diffusion of non-ionic surfactant aqueous solutions by a beam deflection method. The thermal diffusion of pentaethylene glycol monododecyl ether (C12E5) and hexaethylene glycol monododecyl ether (C12E6) is studied in the concentration range of 1.0-99.0 wt% and in the temperature range of 20.0-35.0 °C. A stable temperature gradient is applied to the solution, where solute molecules shift to the cold side of the solution for lowconcentration samples. The concentration dependence of the Soret coefficient ST of the C12E6 aqueous solution shows a sign inversion behavior. At all concentrations, the developed concentration gradient is proportionally related to the applied temperature gradient. The results confirm that the magnitude of ST has no temperature gradient dependence under the studied experimental conditions.

  11. Determination of ferrous and ferric iron in aqueous biological solutions

    Energy Technology Data Exchange (ETDEWEB)

    Pepper, S.E. [Earth and Environmental Sciences Division, Los Alamos National Laboratory, 1400 University Drive, Carlsbad, NM 88220 (United States); Borkowski, M., E-mail: marian@lanl.gov [Earth and Environmental Sciences Division, Los Alamos National Laboratory, 1400 University Drive, Carlsbad, NM 88220 (United States); Richmann, M.K.; Reed, D.T. [Earth and Environmental Sciences Division, Los Alamos National Laboratory, 1400 University Drive, Carlsbad, NM 88220 (United States)

    2010-03-24

    A solvent extraction method was employed to determine ferrous and ferric iron in aqueous samples. Fe{sup 3+} is selectively extracted into the organic phase (n-heptane) using HDEHP (bis(2-ethylhexyl) hydrogen phosphate) and is then stripped using a strong acid. After separation, both oxidation states and the total iron content were determined directly by ICP-MS analysis. This extraction method was refined to allow determination of both iron oxidation states in the presence of strong complexing ligands, such as citrate, NTA and EDTA. The accuracy of the method was verified by crosschecking using a refinement of the ferrozine assay. Presented results demonstrate the ability of the extraction method to work in a microbiological system in the presence of strong chelating agents following the bioreduction of Fe{sup 3+} by the Shewanella alga BrY. Based on the results we report, a robust approach was defined to separately analyze Fe{sup 3+} and Fe{sup 2+} under a wide range of potential scenarios in subsurface environments where radionuclide/metal contamination may coexist with strongly complexing organic contaminants.

  12. Comparative analysis of the effect of pretreating aspen wood with aqueous and aqueous-organic solutions of sulfuric and nitric acid on its reactivity during enzymatic hydrolysis

    DEFF Research Database (Denmark)

    Dotsenko, Gleb; Osipov, D. O.; Zorov, I. N.;

    2016-01-01

    The effect of aspen wood pretreatment methods with the use of both aqueous solutions of sulfuric and nitric acids and aqueous-organic solutions (ethanol, butanol) of sulfuric acid (organosolv) on the limiting degree of conversion of this type of raw material into simple sugars during enzymatic...... of ground wood by 300–400%, compared to the initial raw material. Pretreatment with a 4.8% aqueous solution of nitric acid (125°C, 1.8 MPa, 10 min) is shown to be most effective, as it increases the reactivity of the ground aspen wood by more than 500%....

  13. Study of a Novel Method for the Thermolysis of Solutes in Aqueous Solution Using a Low Temperature Bubble Column Evaporator.

    Science.gov (United States)

    Shahid, Muhammad; Xue, Xinkai; Fan, Chao; Ninham, Barry W; Pashley, Richard M

    2015-06-25

    An enhanced thermal decomposition of chemical compounds in aqueous solution has been achieved at reduced solution temperatures. The technique exploits hitherto unrecognized properties of a bubble column evaporator (BCE). It offers better heat transfer efficiency than conventional heat transfer equipment. This is obtained via a continuous flow of hot, dry air bubbles of optimal (1-3 mm) size. Optimal bubble size is maintained by using the bubble coalescence inhibition property of some salts. This novel method is illustrated by a study of thermal decomposition of ammonium bicarbonate (NH4HCO3) and potassium persulfate (K2S2O8) in aqueous solutions. The decomposition occurs at significantly lower temperatures than those needed in bulk solution. The process appears to work via the continuous production of hot (e.g., 150 °C) dry air bubbles, which do not heat the solution significantly but produce a transient hot surface layer around each rising bubble. This causes the thermal decomposition of the solute. The decomposition occurs due to the effective collision of the solute with the surface of the hot bubbles. The new process could, for example, be applied to the regeneration of the ammonium bicarbonate draw solution used in forward osmosis.

  14. Free energy landscapes of ion coordination in aqueous solution.

    Science.gov (United States)

    Brancato, Giuseppe; Barone, Vincenzo

    2011-11-10

    We show how the fruitful concept of free energy landscape, as invoked in the description of complex biological systems, can be rather easily extended to build up a simple and accurate picture about solvent coordination around ions. This may represent a revealing key element for the qualitative and quantitative physical-chemical interpretation of a large number of phenomena occurring in solution, such as water exchange mechanisms, ion mobility, solvation dynamics, ion channel selectivity, and so on. In particular, using a computational approach rooted into molecular dynamics simulations and enhanced sampling techniques, we show how the free energy landscapes of ion coordination in solution can be very easily and accurately obtained in a number of illustrative examples.

  15. Rheology of mixed alginate-hyaluronan aqueous solutions.

    Science.gov (United States)

    Travan, Andrea; Fiorentino, Simona; Grassi, Mario; Borgogna, Massimiliano; Marsich, Eleonora; Paoletti, Sergio; Donati, Ivan

    2015-01-01

    The present manuscript addresses the description of binary systems of hyaluronan (HA) and alginate (Alg) in semi-concentrated solution. The two polysaccharides were completely miscible in the entire range of relative weight fraction explored at a total polymer concentration of up to 3% (w/V). The rheological study encompassed steady flow and mechanical spectra for HA/Alg systems at different weight fractions with hyaluronan at different molecular weights. These extensive analyses allowed us to propose a model for the molecular arrangement in solution that envisages a mutual exclusion between the two polysaccharides even though a clear phase separation does not occur. This result may have profound implications when combinations of alginate and hyaluronan are proposed in the field of biomedical materials.

  16. Surfactant-free exfoliation of graphite in aqueous solutions.

    Science.gov (United States)

    Ricardo, Karen B; Sendecki, Anne; Liu, Haitao

    2014-03-14

    We report an ultrasound exfoliation of graphite in a weakly basic solution to produce multi-layer graphene dispersion. A unique feature of this process is that no surfactant was added to stabilize the exfoliated graphene in water. The concentration of the graphene dispersion prepared by this approach can be up to 0.02 mg mL(-1) and it was stable at room temperature for several months.

  17. Interfacial structures of acidic and basic aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Tian, C.; Ji, N.; Waychunas, G.; Shen, Y.R.

    2008-10-20

    Phase-sensitive sum-frequency vibrational spectroscopy was used to study water/vapor interfaces of HCl, HI, and NaOH solutions. The measured imaginary part of the surface spectral responses provided direct characterization of OH stretch vibrations and information about net polar orientations of water species contributing to different regions of the spectrum. We found clear evidence that hydronium ions prefer to emerge at interfaces. Their OH stretches contribute to the 'ice-like' band in the spectrum. Their charges create a positive surface field that tends to reorient water molecules more loosely bonded to the topmost water layer with oxygen toward the interface, and thus enhances significantly the 'liquid-like' band in the spectrum. Iodine ions in solution also like to appear at the interface and alter the positive surface field by forming a narrow double-charge layer with hydronium ions. In NaOH solution, the observed weak change of the 'liquid-like' band and disappearance of the 'ice-like' band in the spectrum indicates that OH{sup -} ions must also have excess at the interface. How they are incorporated in the interfacial water structure is however not clear.

  18. Experimental study of directional solidification of aqueous ammonium chloride solution

    Science.gov (United States)

    Chen, C. F.; Chen, Falin

    1991-01-01

    Directional solidification experiments have been carried out using the analog casting system of NH4Cl-H2O solution by cooling it from below with a constant-temperature surface ranging from -31.5 C to +11.9 C. The NH4Cl concentration was 26 percent in all solutions, with a liquidus temperature of 15 C. It was found that finger convection occurred in the fluid region just above the mushy layer in all experiments. Plume convection with associated chimneys in the mush occurred in experiments with bottom temperatures as high as +11.0 C. However, when the bottom temperature was raised to +11.9 C, no plume convection was observed, although finger convection continued as usual. A method has been devised to determine the porosity of the mush by computed tomography. Using the mean value of the porosity across the mush layer and the permeability calculated by the Kozeny-Carman relationship, the critical solute Rayleigh number across the mush layer for onset of plume convection was estimated to be between 200 and 250.

  19. Electrosprayed molybdenum trioxide aqueous solution and its application in organic photovoltaic cells.

    Science.gov (United States)

    Suzuki, Katsumi; Fukuda, Takeshi; Liao, Yingjie

    2014-01-01

    A molybdenum trioxide thin film with smooth surface and uniform thickness was successfully achieved by an electrospray deposition method using an aqueous solution with a drastically low concentration of 0.05 wt%. Previous papers demonstrated that an additive solvent technique is useful for depositing the thin film by the electrospray deposition, and the high vapor pressure and a low surface tension of an additive solvent were found to be important factors. As a result, the smooth molybdenum trioxide thin film was obtained when the acetonitrile was used as the additive solvent. Furthermore, the vapor pressure of acetone is much higher than that of aqueous solution, and this indicates that the acetone is easily evaporated after spraying from the glass capillary. By optimizing a concentration of acetone in the molybdenum aqueous solution, a minimum root mean square roughness of the MoO3 thin film became 3.7 nm. In addition, an organic photovoltaic cell was also demonstrated using the molybdenum trioxide as a hole transport layer. Highest photoconversion efficiency was 1.72%, a value comparable to that using conventional thermal evaporation process even though the aqueous solution was used for the solution process. The photovonversion efficiency was not an optimized value, and the higher value can be achieved by optimizing the coating condition of the active layer.

  20. Electrosprayed molybdenum trioxide aqueous solution and its application in organic photovoltaic cells.

    Directory of Open Access Journals (Sweden)

    Katsumi Suzuki

    Full Text Available A molybdenum trioxide thin film with smooth surface and uniform thickness was successfully achieved by an electrospray deposition method using an aqueous solution with a drastically low concentration of 0.05 wt%. Previous papers demonstrated that an additive solvent technique is useful for depositing the thin film by the electrospray deposition, and the high vapor pressure and a low surface tension of an additive solvent were found to be important factors. As a result, the smooth molybdenum trioxide thin film was obtained when the acetonitrile was used as the additive solvent. Furthermore, the vapor pressure of acetone is much higher than that of aqueous solution, and this indicates that the acetone is easily evaporated after spraying from the glass capillary. By optimizing a concentration of acetone in the molybdenum aqueous solution, a minimum root mean square roughness of the MoO3 thin film became 3.7 nm. In addition, an organic photovoltaic cell was also demonstrated using the molybdenum trioxide as a hole transport layer. Highest photoconversion efficiency was 1.72%, a value comparable to that using conventional thermal evaporation process even though the aqueous solution was used for the solution process. The photovonversion efficiency was not an optimized value, and the higher value can be achieved by optimizing the coating condition of the active layer.

  1. Desalination of aqueous solutions by LTA and MFI zeolite membranes using pervaporation method

    Directory of Open Access Journals (Sweden)

    A. Malekpour

    2011-12-01

    Full Text Available LTA and MFI zeolite membranes were hydrothermally grown on the surface of an α-alumina porous support. The synthesized membranes were used for removal of cationic and anionic species from aqueous solutions by the pervaporation method. The perfection of the membranes was improved by employing the multi-stage synthesis method. The membranes were characterized by XRD, SEM and IR methods. The membranes were initially evaluated by the pervaporation separation of water from aqueous 2-propanol mixtures. The separation factors obtained were 7081 and 105 for NaA and ZSM-5 membranes, respectively. The ability of membranes for desalination of some aqueous solutions containing I-, Cs+ and Sr2+ ions was examined in various conditions. These ionic species were chosen because of their importance in the nuclear sciences. Both membranes effectively removed (more than 99 wt% I-, Cs+ and Sr2+ from their singlesalt solutions (0.001mol dm-3 over a temperature range of 298-338 K. The effects of parameters such as time and temperature on the separation factors and fluxes were investigated. This work shows that, due to their excellent chemical, thermal and mechanical stability, the zeolitic membranes are useful for desalination of aqueous solutions and treating saline wastewaters by pervaporation. Therefore, this method has the ability to desalinate harsh environment solutions involving strong solvent and radioactive components.

  2. Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation

    Directory of Open Access Journals (Sweden)

    Mohsen Hosseinzadeh

    2016-12-01

    Full Text Available In this study, the removal of cadmium and lead ions from aqueous solution by nanocrystalline magnetite was investigated. The nanocrystalline magnetite was synthesized by mechanochemical activation of hematite in a high energy planetary mill in argon atmosphere for 45 hours. The ability of the synthesized nanocrystalline magnetite for removal of Cd(II and Pb(II from aqueous solutions was studied in a batch reactor under different experimental conditions with different pHs, contact times, initial metal ion concentrations and temperatures. The solution’s pH was found to be a key factor in the adsorption of heavy metal ions on Fe3O4. The optimum pH of the solution for adsorption of Cd(II and Pb(II from aqueous solutions was found to be 6.5 and 5.5, respectively. The best models to describe the kinetics and isotherms of single adsorption were both the pseudo first and second-order kinetic models and Langmuir models, respectively, indicating the monolayer chemisorption of Cd(II and Pb(II on Fe3O4 nanoparticles. Moreover, the thermodynamic parameters (i.e., ∆H°, ∆S°, ∆G° were evaluated which indicated that the adsorption was spontaneous and exothermic. The results suggested that the synthesized material (magnetite nanocrystalline particles may be used as effective and economic absorbent for removal of Cd(II and Pb(II from aqueous solutions.

  3. Solution thermodynamics of sodium pyruvate in aqueous glycine solutions at T 298.15-313.15 K

    Directory of Open Access Journals (Sweden)

    Pandit Bijan Kumar

    2016-01-01

    Full Text Available In this study we investigated the effects of sodium pyruvate on the solution thermodynamics of glycine in terms of the solute-solute and solute-solvent interactions in aqueous solutions. Measured density and viscosity were used to derive apparent molar volumes (φV, standard partial molar volumes (φV0 and viscosity B-coefficients at 298.15, 303.15 K, 308.15, and 318.15 K under ambient pressure. The interactions are further discussed in terms of ion-dipolar, hydrophobic- hydrophobic, hydrophilic-hydrophobic group interactions. The activation parameters of viscous flow were also discussed in terms of transition state theory. The overall results indicated that ion-hydrophilic and hydrophilic-hydrophilic group interactions are predominant in the ternary solutions.

  4. [Photosensitized luminescence of singlet oxygen in aqueous solutions].

    Science.gov (United States)

    Krasnovskiĭ, A A

    1979-01-01

    The photoluminescence of singlet oxygen has been observed in air saturated solutions of riboflavin in D2O and mixtures of D2O and H2O. The excitation spectrum coincides with the absorption spectrum of the pigment, the emission maximum lies at 1275 nm. In D2O the quantum yield is approximately 1,2 x 10(-7). H2O quenches the luminescence. Analysis of quenching has shown that the quantum yield in H2O is less than in D2O by the factor of 20.

  5. The decisive role of free water in determining homogenous ice nucleation behavior of aqueous solutions.

    Science.gov (United States)

    Wang, Qiang; Zhao, Lishan; Li, Chenxi; Cao, Zexian

    2016-05-26

    It is a challenging issue to quantitatively characterize how the solute and pressure affect the homogeneous ice nucleation in a supercooled solution. By measuring the glass transition behavior of solutions, a universal feature of water-content dependence of glass transition temperature is recognized, which can be used to quantify hydration water in solutions. The amount of free water can then be determined for water-rich solutions, whose mass fraction, Xf, is found to serve as a universal relevant parameter for characterizing the homogeneous ice nucleation temperature, the meting temperature of primary ice, and even the water activity of solutions of electrolytes and smaller organic molecules. Moreover, the effects of hydrated solute and pressure on ice nucleation is comparable, and the pressure, when properly scaled, can be incorporated into the universal parameter Xf. These results help establish the decisive role of free water in determining ice nucleation and other relevant properties of aqueous solutions.

  6. Hydration and rotational diffusion of levoglucosan in aqueous solutions

    Science.gov (United States)

    Corezzi, S.; Sassi, P.; Paolantoni, M.; Comez, L.; Morresi, A.; Fioretto, D.

    2014-05-01

    Extended frequency range depolarized light scattering measurements of water-levoglucosan solutions are reported at different concentrations and temperatures to assess the effect of the presence and distribution of hydroxyl groups on the dynamics of hydration water. The anhydro bridge, reducing from five to three the number of hydroxyl groups with respect to glucose, considerably affects the hydration properties of levoglucosan with respect to those of mono and disaccharides. In particular, we find that the average retardation of water dynamics is ≈3-4, that is lower than ≈5-6 previously found in glucose, fructose, trehalose, and sucrose. Conversely, the average number of retarded water molecules around levoglucosan is 24, almost double that found in water-glucose mixtures. These results suggest that the ability of sugar molecules to form H-bonds through hydroxyl groups with surrounding water, while producing a more effective retardation, it drastically reduces the spatial extent of the perturbation on the H-bond network. In addition, the analysis of the concentration dependence of the hydration number reveals the aptitude of levoglucosan to produce large aggregates in solution. The analysis of shear viscosity and rotational diffusion time suggests a very short lifetime for these aggregates, typically faster than ≈20 ps.

  7. Micro-organization of humic acids in aqueous solutions

    Science.gov (United States)

    Klučáková, Martina; Věžníková, Kateřina

    2017-09-01

    The methods of dynamic light scattering and micro-rheology were used to investigate the molecular organization of humic acids in solutions. The obtained results were supplemented by ultraviolet/visible spectrometry and measurement of the zeta potential. Particle tracking micro-rheology was used for the first time as a novel method in humic research. Solutions of humic acids were prepared in three different mediums: NaOH, NaCl, and NaOH neutralized by HCl after dissolution of the humic sample. The molecular organization of humic acids was studied over a wide concentration range (0.01-10 g dm-3). Two breaks were detected in the obtained concentration dependencies. The rearrangements were observed at concentrations around 0.02 g dm-3 and 1 g dm-3. Changes in the measured values observed at around 0.02 g dm-3 were less noticeable and were related to the formation of particles between 100 and 1000 nm in size and the strong bimodal character of humic systems diluted by NaCl. The ;switch-over point; at around 1 g dm-3 indicated changes in the secondary structure of humic acids connected with the increase in colloidal stability (decrease of zeta potential), the decrease in polydispersity, and minimal values of viscosity.

  8. Dynamic contact angles in oil-aqueous polymer solutions.

    Science.gov (United States)

    Al-Shareef, Amer; Neogi, P; Bai, Baojun

    2017-01-25

    Polymer flooding is an important process in enhanced oil recovery. The displacement front is unstable when low viscosity brine displaces the heavy crude oil in the reservoir. Water-soluble polymers are added to the brine to increase its viscosity which stabilizes the displacement process. To analyze the displacement process at the micro-level, we have investigated the dynamic contact angles in silicone oil-polymer (polyethylene oxide) solution and for the first time. The dynamic contact angle is the apparent contact angle at the three-phase contact line which governs the capillary pressure, and thus is important for the displacement process. The data show no obvious signs of either shear thinning or elastic behavior, although for some systems with highest elastic effects some unexplained effects on dynamic contact angles are observed that correlate with elastic effects. Overall, dynamic contact angles are explained well using existing models for two Newtonian fluids, when the zero shear viscosity is used for the polymer solution.

  9. Growth and Structure of Zirconium Hydrous Polymers in Aqueous Solutions

    Science.gov (United States)

    Singhal; Toth; Beaucage; Lin; Peterson

    1997-10-15

    Zirconium oxychloride solutions prepared at different pH were heated at elevated temperatures for various aging periods to gain an understanding of the growth mechanism and structure of zirconium hydrous polymers. Small angle X-ray scattering (SAXS) measurements were made on these solutions. It was observed that shape of clusters at the earlier stages of growth is close to a rod rather than a sheet as suggested earlier. The scattering data indicate that a rod-shaped primary particle is formed at pH 1.2, and on an increase in the pH, the primary particles become more branched. On aging more than 1250 min at 92°C, these primary particles form large aggregates while retaining the primary particle structure. These aggregates, which are mass fractal in nature, restructure while growing in size and eventually transform into dense particles. Scattering data in this study were not enough to determine a specific kinetic growth model of the aggregates because the scattering intensity at low q constantly changes with time during the restructuring process. Copyright 1997 Academic Press. Copyright 1997Academic Press

  10. Growth and structure of zirconium hydrous polymers in aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Singhal, A. [Oak Ridge National Lab., TN (United States)]|[Univ. of Tennessee, Knoxville, TN (United States). Dept. of Chemistry; Toth, L.M.; Lin, J.S. [Oak Ridge National Lab., TN (United States); Beaucage, G. [Univ. of Cincinnati, OH (United States). Dept. of Materials Science and Engineering; Peterson, J. [Univ. of Tennessee, Knoxville, TN (United States). Dept. of Chemistry

    1997-10-15

    Zirconium oxychloride solutions prepared at different pH were heated at elevated temperatures for various aging periods to gain an understanding of the growth mechanism and structure of zirconium hydrous polymers. Small angle X-ray scattering (SAXS) measurements were made on these solutions. It was observed that shape of clusters at the earlier stages of growth is close to a rod rather than a sheet as suggested earlier. The scattering data indicate that a rod-shaped primary particle is formed at pH 1.2, and on an increase in the pH, the primary particles become more branched. On aging more than 1,250 min at 92 C, these primary particles form large aggregates while retaining the primary particle structure. These aggregates, which are mass fractal in nature, restructure while growing in size and eventually transform into dense particles. Scattering data in this study were not enough to determine a specific kinetic growth model of the aggregates because the scattering intensity at low q constantly changes with time during the restructuring process.

  11. Electrocrystallizations of copper on glassy carbon in CuCl2 silica sol and aqueous solutions

    Institute of Scientific and Technical Information of China (English)

    Yan Yan Feng; Min Gu; Yun Gui Du

    2012-01-01

    Electrocrystallizations of copper from both CuCl2 silica sol and aqueous solutions were studied by the chronoamperometry technique.It was found that current density contributions of the double-layer charging (iDL) in current-time transients (CTTs) from both of the solutions were large.An adsorption-nucleation based model was proposed to analyze quantitatively the CTTs,by which copper electrocrystallization mechanism was characterized as progressive nucleation with 3D growth (3DP) under diffusion control.The diffusion coefficient of copper ions and the AN∞ products in aqueous solutions were larger than that in silica sols,which indicated that copper nucleation was inhibited in sol solution.The large iDL may be resulted from the adsorption of chloride ions on the electrode surface.

  12. A Concise Equation of State for Aqueous Solutions of Electrolytes Incorporating Thermodynamic Laws and Entropy

    Directory of Open Access Journals (Sweden)

    Raji Heyrovská

    2004-03-01

    Full Text Available Abstract: Recently, the author suggested a simple and composite equation of state by incorporating fundamental thermodynamic properties like heat capacities into her earlier concise equation of state for gases based on free volume and molecular association / dissociation. This work brings new results for aqueous solutions, based on the analogy of the equation of state for gases and solutions over wide ranges of pressures (for gases and concentrations (for solutions. The definitions of entropy and heat energy through the equation of state for gases, also holds for solutions.

  13. Probing Ionic Liquid Aqueous Solutions Using Temperature of Maximum Density Isotope Effects

    Directory of Open Access Journals (Sweden)

    Mohammad Tariq

    2013-03-01

    Full Text Available This work is a new development of an extensive research program that is investigating for the first time shifts in the temperature of maximum density (TMD of aqueous solutions caused by ionic liquid solutes. In the present case we have compared the shifts caused by three ionic liquid solutes with a common cation—1-ethyl-3-methylimidazolium coupled with acetate, ethylsulfate and tetracyanoborate anions—in normal and deuterated water solutions. The observed differences are discussed in terms of the nature of the corresponding anion-water interactions.

  14. Ion spatial distributions at the liquid-vapor interface of aqueous potassium fluoride solutions.

    Science.gov (United States)

    Brown, Matthew A; D'Auria, Raffaella; Kuo, I-F William; Krisch, Maria J; Starr, David E; Bluhm, Hendrik; Tobias, Douglas J; Hemminger, John C

    2008-08-28

    X-Ray photoemission spectroscopy operating under ambient pressure conditions is used to probe ion distributions throughout the interfacial region of a free-flowing aqueous liquid micro-jet of 6 M potassium fluoride. Varying the energy of the ejected photoelectrons by carrying out experiments as a function of X-ray wavelength measures the composition of the aqueous-vapor interfacial region at various depths. The F(-) to K(+) atomic ratio is equal to unity throughout the interfacial region to a depth of 2 nm. The experimental ion profiles are compared with the results of a classical molecular dynamics simulation of a 6 M aqueous KF solution employing polarizable potentials. The experimental results are in qualitative agreement with the simulations when integrated over an exponentially decaying probe depth characteristic of an APPES experiment. First principles molecular dynamics simulations have been used to calculate the potential of mean force for moving a fluoride anion across the air-water interface. The results show that the fluoride anion is repelled from the interface, consistent with the depletion of F(-) at the interface revealed by the APPES experiment and polarizable force field-based molecular dynamics simulation. Together, the APPES and MD simulation data provide a detailed description of the aqueous-vapor interface of alkali fluoride systems. This work offers the first direct observation of the ion distribution at an aqueous potassium fluoride solution interface. The current experimental results are compared to those previously obtained for saturated solutions of KBr and KI to underscore the strong difference in surface propensity between soft/large and hard/small halide ions in aqueous solution.

  15. Sonochemical Decolorization of Methyl Orange in Aqueous Solution

    Institute of Scientific and Technical Information of China (English)

    XING Tie-ling; Chu K.H.; CHEN Guo-qiang

    2006-01-01

    The sonochemical decolorization of Methylene Orange was studied using a 24 kHz Ultrasound device with a 1.4 cm diameter horn. pH, power density, the effects of pH and power density on decolorization were discussed. The combined effect of radiate time, the initial concentration of dyes and the addition of Fe2+ on the decolorization was studied using response surface methodology. The results showed that the factorial central composite design was successfully employed for experimental design and predication of the results. AtpH = 2.8, T=30℃, power denstity= 300 W/L and Fe2+ of 2 mg/L, the decolorization percentage of 5 mg/L dye solution reached 96% after 60 min ultrasound treatment.The rate of decolorization of the dye was greatly improved in the presence of Fe2+. The sonolysis of the dye followed first-order kinetics.

  16. Removal of Acid Green 25 from Aqueous Solution by Adsorption

    Directory of Open Access Journals (Sweden)

    R. Parimalam

    2012-01-01

    Full Text Available The adsorptive removal of Acid Green 25 by Ananas Comosus (L Activated carbon was investigated in this study. The effects of initial dye concentration, contact time, pH and temperature were studied for the adsorption of Acid Green 25 in batch mode. At 100 mg/L of initial dye concentration the adsorbent removes 182.6 mg/g of dye from solution; it further increases on increasing the temperature. The calculated values of ∆G° indicate that the adsorption process is spontaneous, negative ∆H° indicate that the adsorption process is exothermic and the positive value of ∆S° indicates the increase in randomness. The rate of dye adsorption follows pseudo second order model with an r2 value of 0. 999. Standard adsorption isotherms were used to fit the experimental equilibrium data. The Langmuir, Freundlich, and Tempkin models are appropriate to explain the adsorption phenomenon with good fit.

  17. Structure of a passivated Ge surface prepared from aqueous solution.

    Energy Technology Data Exchange (ETDEWEB)

    Lyman, P. F.; Sakata, O.; Marasco, D, L.; Lee, T.-L.; Breneman, K. D.; Keane, D. T.; Bedzyk, M. J.; Materials Science Division; Northwestern Univ.; Univ. of Wisconsin at Milwaukee

    2000-08-10

    The structure of a passivating sulfide layer on Ge(001) was studied using X-ray standing waves and X-ray fluorescence. The sulfide layer was formed by reacting clean Ge substrates in (NH{sub 4}){sub 2}S solutions of various concentrations at 80{sup o}C. For each treatment, a sulfide layer containing approximately two to three monolayers (ML) of S was formed on the surface, and an ordered structure was found at the interface that contained approximately 0.4 ML of S. Our results suggest the rapid formation of a glassy GeS{sub x} layer containing 1.5-2.5 ML S residing atop a partially ordered interfacial layer of bridge-bonded S. The passivating reaction appears to be self-limited to 2-3 ML at this reaction temperature.

  18. Photodegradation of α-naphthaleneacetic acid in aqueous solution

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Kinetic processes of α-naphthaleneacetic acid (NAA) photolysis were studied under different conditions. The results showed that the ultraviolet light was more effective than fluorescent light in promoting degradation, and the degradation of NAA under ultraviolet light followed the first order kinetics with the photolysis rate constant of 1.15 x 10-2 min-1 and half-life time (t1/2) of 60 min. Further, it was proved that the photolysis rate was higher in the presence of oxygen, titanium dioxide (TiO2), and low pH ( acidic solution). At last, two photolysis intermediates were identified by GC-MS and possible photolysis pathways were proposed.

  19. Sorption of dyes from aqueous solutions onto fly ash.

    Science.gov (United States)

    Janos, Pavel; Buchtová, Hana; Rýznarová, Milena

    2003-12-01

    Brown coal fly ashes were tested as potentially low-cost sorbents for the removal of synthetic dyes from waters. It was shown that both basic (cationic) as well as acid (anionic) dyes can be sorbed onto the fly ash. The adsorption can be described by the multi-site Langmuir isotherm. The sorption capacities were in the range of 10(-1)-10(-3)mmol/g and did not differ significantly for basic and acid dyes. The dye sorption decreased in the presence of organic solvents (methanol, acetone). The presence of oppositely charged surfactants exhibited a pronounced effect on the dye sorption-low concentrations of the surfactant enhanced sorption, whereas high concentrations solubilized the dyes and kept them in solution. Inorganic salts exhibited only a minor effect on the dye sorption. The sorption of basic dyes increased at high pH values, whereas the opposite was true for acid dyes.

  20. Adsorption of ammonium dinitramide (ADN) from aqueous solutions. 1. Adsorption on powdered activated charcoal.

    Science.gov (United States)

    Santhosh, G; Venkatachalam, S; Ninan, K N; Sadhana, R; Alwan, S; Abarna, V; Joseph, M A

    2003-03-17

    Investigations on the adsorption of ammonium dinitramide (NH(4)N(NO(2))(2)) (ADN) from aqueous solutions on powdered activated charcoal (PAC) were carried out in order to find out an effective and easier method of separating ADN from aqueous solutions. The effectiveness of PAC in the selective adsorption of ADN from aqueous solutions of ADN (ADN-F) and ADN in presence of sulfate (SO(4)(2-)) and nitrate (NO(3)(-)) ions (ADN-PS) was examined and compared using batch and column methods. The adsorption process follows both Langmuir and Freundlich adsorption isotherms and the isotherm parameters for the models were determined. The observed data favor the formation of monolayer adsorption. The adsorption capacities were found to be 63.3, 119, 105.3 and 82 mg of ADN per g of PAC for ADN-F (batch), ADN-PS (batch), ADN-F (column) and ADN-PS (column), respectively. Break-through curves for ADN-F and ADN-PS were obtained for the optimization of separation of ADN from aqueous solutions. Elution curves were generated for the desorption of ADN from PAC using hot water as eluent.

  1. Study on Properties of Microemulsion AEO-9/Butanol/Cyclohexane/Salt Aqueous Solution

    Institute of Scientific and Technical Information of China (English)

    Qiu Guanming; Chen Yongjie; Tian Yiguang; Fang Li; Xiao Linjiu; Sun Yanbin

    2004-01-01

    The microemulsion AEO-9/butanol/cyclohexane/nitrate aqueous solution (or ammonium salt aqueous solution) was studied, which was used as 'micro-reactor' in preparing long afterglow phosphor materials SrAl2O4: Eu2+ ,Dy3+. The phase behavior of microemulsion was investigated. The radius of inner water droplet Rw and the change of standard free energy ΔG*o→i were obtained by means of dilution method and theoretical calculation. The result shows that with the increase of W/S, the area of microemulsion region decreases, Rw and ΔG*o→i increase and the microemulsion stability decreases. The structure change and formation area of microemulsion AEO-9/butanol/cyclohexane/nitrate aqueous solution ( or ammonium salt aqueous solution) were offered for the adoption of a synthesis method with newly high efficiency and utility. The particular size and its distribution theory gist, fluorescence life-span, and quenching concentration parameter data were expected. A new approach was explored for finding a new preparation method of rare earths afterglow materials and increasing luminescence intensity without crashing.

  2. Degradation/oxidation susceptibility of organic photovoltaic cells in aqueous solutions

    Science.gov (United States)

    Habib, K.; Husain, A.; Al-Hazza, A.

    2015-12-01

    A criterion of the degradation/oxidation susceptibility of organic photovoltaic (OPV) cells in aqueous solutions was proposed for the first time. The criterion was derived based on calculating the limit of the ratio value of the polarization resistance of an OPV cell in aqueous solution (Rps) to the polarization resistance of the OPV cell in air (Rpair). In other words, the criterion lim(Rps/Rpair) = 1 was applied to determine the degradation/oxidation of the OPV cell in the aqueous solution when Rpair became equal (increased) to Rps as a function of time of the exposure of the OPV cell to the aqueous solution. This criterion was not only used to determine the degradation/oxidation of different OPV cells in a simulated operational environment but also it was used to determine the electrochemical behavior of OPV cells in deionized water and a polluted water with fine particles of sand. The values of Rps were determined by the electrochemical impedance spectroscopy at low frequency. In addition, the criterion can be applied under diverse test conditions with a predetermined period of OPV operations.

  3. Reentrant condensation of lysozyme: Implications for studying dynamics of lysozyme in aqueous solutions of lithium chloride

    Energy Technology Data Exchange (ETDEWEB)

    Mamontov, Eugene [ORNL; O' Neill, Hugh Michael [ORNL

    2014-01-01

    Recent studies have outlined the use of eutectic solution of lithium chloride in water to study microscopic dynamics of lysozyme in an aqueous solvent that is remarkably similar to pure water in many respects, yet allows experiments over a wide temperature range without the solvent crystallization. The eutectic point in (H2O)R(LiCl) system corresponds to R 7.3, and it is of interest to investigate whether less concentrated aqueous solutions of LiCl could be employed in low-temperature studies of a solvated protein. We have investigated a range of concentrations of lysozyme and LiCl in aqueous solutions to identify systems that do not show phase separation and avoid solvent crystallization on cooling down. Compared to the lysozyme concentration in solution, the concentration of LiCl in the aqueous solvent plays the major role in determining systems suitable for low-temperature studies. We have observed interesting and rich phase behavior reminiscent of reentrant condensation of proteins.

  4. STEREOCHEMICAL ASPECTS OF HYDRATION OF CARBOHYDRATES IN AQUEOUS-SOLUTIONS .3. DENSITY AND ULTRASOUND MEASUREMENTS

    NARCIS (Netherlands)

    GALEMA, SA; HOILAND, H

    1991-01-01

    Density and ultrasound measurements have been performed in aqueous solutions of pentoses, hexoses, methylpyranosides, and disaccharides as a function of molality of carbohydrate (0-0.3 mol kg-1). Partial molar volumes, partial molar isentropic compressibilities, and hydration numbers have been calcu

  5. STEREOCHEMICAL ASPECTS OF HYDRATION OF CARBOHYDRATES IN AQUEOUS-SOLUTIONS .2. KINETIC MEDIUM EFFECTS

    NARCIS (Netherlands)

    GALEMA, SA; BLANDAMER, MJ; ENGBERTS, JBFN

    1992-01-01

    Rate constants for the hydrolysis of 1-benzoyl-3-phenyl-1,2,4-triazole in aqueous solutions of carbohydrates have been measured as a function of molality and nature of added mono- and disaccharides. The kinetic medium effects induced by the carbohydrates originate from hydration sphere overlap effec

  6. ADSORPTION CHARACTERISTIC OF IRON ONTO POLY[EUGENOL-CO-(DIVINYL BENZENE] FROM AQUEOUS SOLUTION

    Directory of Open Access Journals (Sweden)

    Fitrilia Silvianti

    2017-09-01

    • Zou, X.; Pan, J.; Ou, H.; Wang, X.;Guan, W.; Li, C.; Yan, Y.; Duan, Y. Adsorptive removal of Cr(III and Fe(III from aqueous solution by chitosan/attapulgite composites: Equilibrium, thermodynamics and kinetics. Chem. Eng. J. 2011, 167: 112-121, DOI: 10.1016/j.cej.2010.12.009

  7. The Reaction between Iron(II) Iodide and Potassium Dichromate(VI) in Acidified Aqueous Solution

    Science.gov (United States)

    Talbot, Christopher

    2013-01-01

    This "Science note" teaching lesson explores the possible reaction between the ions in a reaction mixture consisting of iron(II) iodide and potassium dichromate(VI) in acidified aqueous solution. The electrode potentials will be used to deduce any spontaneous reactions under standard thermodynamic conditions (298 K, 1 bar (approximately…

  8. Preparation of Ultrafine Cobalt Powder by Chemical Reduction in Aqueous Solution

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Nanocrystalline cobalt powders have been prepared from aqueous solution by reducing their corresponding metal salts under suitable conditions. The experimental conditions have been studied in detail. X-ray powder diffraction patterns show that the cobalt powder is hexagonal crystallite. The average particle size of the ultrafine cobalt powder is 55 nm.

  9. Chemiluminescence in the reaction of ozone with 6-methyluracil in aqueous solutions

    Science.gov (United States)

    Zimin, Yu. S.; Khairullina, L. R.; Kutlugil'dina, G. G.; Mustafin, A. G.

    2015-12-01

    Chemiluminescence in the visible part of the spectrum during the oxidation of 6-methyluracil with ozone in aqueous solutions was found. The kinetics of variation of the luminescence intensity was studied in the temperature range 287-333 K, and the activation parameters of the process were determined.

  10. Gelation Behavior of 5-Chloro-8-hydroxyquinoline, an Antituberculosis Agent in Aqueous Alcohol Solutions

    Directory of Open Access Journals (Sweden)

    Jukka Korpela

    2012-09-01

    Full Text Available It was shown that 5-chloro-8-hydroxyquinoline, an antituberculosis agent, gels aqueous alcohol solutions efficiently. Thermal stability and gel-to-sol transition temperature of 1% gel in CD3OD/D2O (2:1 was studied by 1H-NMR. Fibrous structures of four xerogels have been characterized by scanning electron microscope.

  11. Radiolysis of aqueous solutions of ammonium bicarbonate over a large dose range

    DEFF Research Database (Denmark)

    Draganic, Z.D.; Negrón-Mendoza, A.; Sehested, K.;

    1991-01-01

    Oxygen-free aqueous solutions of 0.05 mol dm-3 ammonium and sodium bicarbonate were studied after receiving various doses of Co-60 gammas (0.01-400 kGy) or 0.5-20 Gy pulses of 10 Mev electrons. Formate and oxalate were found to be the main radiolytic products, in addition to trace amounts of form...

  12. 49 CFR 173.195 - Hydrogen cyanide, anhydrous, stabilized (hydrocyanic acid, aqueous solution).

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Hydrogen cyanide, anhydrous, stabilized... Hazardous Materials Other Than Class 1 and Class 7 § 173.195 Hydrogen cyanide, anhydrous, stabilized (hydrocyanic acid, aqueous solution). (a) Hydrogen cyanide, anhydrous, stabilized, must be packed in...

  13. A New Fluorescent Sensor for Transition Metal Ions in Aqueous Solution

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A new fluorescent sensor consisted of fluorenyl and dioxotetraaza unit, namely, 2,10-dimethyl-6-(9-fluorenyl)-1,4,8,11-tetraazaundencane-5,7-dione (L), was synthesized. It is a fluorescent sensor for transition metal ions in aqueous solution.

  14. EXPERIMENTAL CHARACTERIZATION OF FLUOROCARBON-MODIFIED POLYACRYLAMIDE/SURFACTANT AQUEOUS SOLUTIONS

    Institute of Scientific and Technical Information of China (English)

    Huai-tian Bu; Zhen-zhong Yang; Yun-xiang Zhang

    2003-01-01

    The interaction between surfactants and fluorocarbon-modified polyacrylamide (FC-PAM) in aqueous solutions was evaluated by theological means and fluorescence spectroscopy and was found to be strong regardless of the surfactant's nature. Two representative surfactants, anionic sodium dodecyl sulfate (SDS) and nonionic Triton X-100, were used. The origin of the interaction and its dependence on the surfactant concentration were discussed.

  15. Degradation/oxidation susceptibility of organic photovoltaic cells in aqueous solutions.

    Science.gov (United States)

    Habib, K; Husain, A; Al-Hazza, A

    2015-12-01

    A criterion of the degradation/oxidation susceptibility of organic photovoltaic (OPV) cells in aqueous solutions was proposed for the first time. The criterion was derived based on calculating the limit of the ratio value of the polarization resistance of an OPV cell in aqueous solution (Rp(s)) to the polarization resistance of the OPV cell in air (Rp(air)). In other words, the criterion lim(Rp(s)/Rp(air)) = 1 was applied to determine the degradation/oxidation of the OPV cell in the aqueous solution when Rp(air) became equal (increased) to Rp(s) as a function of time of the exposure of the OPV cell to the aqueous solution. This criterion was not only used to determine the degradation/oxidation of different OPV cells in a simulated operational environment but also it was used to determine the electrochemical behavior of OPV cells in deionized water and a polluted water with fine particles of sand. The values of Rp(s) were determined by the electrochemical impedance spectroscopy at low frequency. In addition, the criterion can be applied under diverse test conditions with a predetermined period of OPV operations.

  16. Guest-host chemistry with dendrimers—binding of carboxylates in aqueous solution

    DEFF Research Database (Denmark)

    Ficker, Mario; Petersen, Johannes Fabritius; Hansen, Jon Stefan

    2015-01-01

    Recognition and binding of anions in water is difficult due to the ability of water molecules to form strong hydrogen bonds and to solvate the anions. The complexation of two different carboxylates with 1-(4-carbomethoxypyrrolidone)-terminated PAMAM dendrimers was studied in aqueous solution using...

  17. Poly(vinylpyridine) adsorbent for the removal of SIPA from its aqueous solution

    Institute of Scientific and Technical Information of China (English)

    Wei Hua Tao; Ai Min Li; Chao Long; Hong Ming Qian

    2009-01-01

    Poly(vinylpyridine) WH-225 resin was prepared and characterized.Compared with the commercial hypercrosslinked adsorbent NDA-100 and macroporous adsorbent XAD-4 resins,the newly synthesized poly(vinylpyridine) WH-225 resin exhibited the highest adsorption capacity toward SIPA from aqueous solution.

  18. A Review on Chemical Effects in Aqueous Solution induced by Plasma with Glow Discharge

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Chemical effects in different aqueous solutions induced by plasma with glow dis charge electrolysis (GDE) and contact glow discharge electrolysis (CGDE) are described in this paper. The experimental and discharge characteristics are also reviewed. These are followed by a discussion of their mechanisms of both anodic and cathodic CGDE..

  19. The solubility of hydrogen sulfide in aqueous N-methyldiethanolamine solutions

    NARCIS (Netherlands)

    Huttenhuis, P.J.G.; Agrawal, N.J.; Versteeg, G.F.

    2008-01-01

    In this work the electrolyte equation of state as developed previously for the system MDEA-H2O-CO2-CH4 was further developed for the system MDEA-H2O-H2S-CH4. With this thermodynamic equilibrium model the total solubility of hydrogen sulfide and the speciation in aqueous solutions of N-methyldiethano

  20. Solubility of Carbon Dioxide and Hydrogen Sulfide in Aqueous N-Methyldiethanolamine Solutions

    NARCIS (Netherlands)

    Huttenhuis, P. J. G.; Agrawal, N. J.; Versteeg, G. F.

    2009-01-01

    In this work, 72 new experimental solubility data points for H(2)S and CO(2) mixtures in aqueous N-methyldiethanol amine (MDEA) solutions at different methane partial pressures (up to 69 bara) are presented. They are correlated using an electrolyte equation of state (E-EOS) thermodynamic model. This

  1. Irreversible structural transitions in mixed micelles of oppositely charged diblock copolymers in aqueous solution

    NARCIS (Netherlands)

    Voets, I.K.; Keizer, de A.; Cohen Stuart, M.A.; Justynska, J.; Schlaad, H.

    2007-01-01

    Using light scattering (titration) measurements, we have shown that micelles can be formed in aqueous solutions of a mixture of poly(4-(2-amino hydrochloride-ethylthio)butylene)-block-poly(ethylene oxide), PAETB(49)-b-PEO212, and poly(4-(2-sodium carboxylate-ethylthio)butylene)-block-poly(ethylene

  2. Experimental and modeling studies on the absorption of NO in aqueous ferrous EDTA solutions

    NARCIS (Netherlands)

    Gambardella, F; Alberts, MS; Winkelman, JGM; Heeres, EJ; Alberts, Michel S.; Heeres, H.J.

    2005-01-01

    This work describes an experimental and modeling study on an industrial relevant process (i.e., the absorption of NO in aqueous Fell(EDTA) solutions) to accurately determine the equilibrium constant of the reaction in the temperature range of 299-329 K. The experiments were carried out in a stirred

  3. Relaxation of the Silver/Silver Iodide Electrode in Aqueous Solution

    NARCIS (Netherlands)

    Peverelli, K.J.

    1979-01-01

    The aim of this study is to detect and characterize relaxation processes on silver/silver iodide electrodes in aqueous electrolyte solution. The information obtained is to be used for an estimation of the consequences of similar processes on colloidal AgI particles during encounter.In chapter 1 a ge

  4. Gum karaya based hydrogel nanocomposites for the effective removal of cationic dyes from aqueous solutions

    CSIR Research Space (South Africa)

    Mittala, H

    2016-02-01

    Full Text Available after nanocomposite formation with SiC NPs. The HNC was employed for the removal of cationic dyes, i.e., malachite green (MG) and rhodamine B (RhB) from the aqueous solution. The HNC was found to remove 91% (MG) and 86% (RhB) of dyes with a polymer dose...

  5. Plasmon interactions between gold nanoparticles in aqueous solution with controlled spatial separation

    DEFF Research Database (Denmark)

    Sendroiu, I.E.; Mertens, Stijn; Schiffrin, D.J.

    2006-01-01

    The effects of interparticle distance on the UV-visible absorption spectrum of gold nanocrystals aggregates in aqueous solution have been investigated. The aggregates were produced by ion-templated chelation of omega-mercaptocarboxylic acid ligands covalently attached to the nanoparticles surface...

  6. Mixed matrix membranes for efficient adsorption of copper ions from aqueous solutions

    NARCIS (Netherlands)

    Tetala, K.K.R.; Stamatialis, Dimitrios

    2013-01-01

    This work presents adsorption of copper (Cu2+) ions from aqueous solutions using mixed matrix membrane (MMM) and its elution afterwards. The developed flat sheet MMM, comprises of chitosan beads incorporated in Ethylene vinyl alcohol (EVAL) polymer porous matrix and exhibits static Cu2+ ion

  7. 99TcO4(-): selective recognition and trapping in aqueous solution.

    Science.gov (United States)

    Alberto, Roger; Bergamaschi, Greta; Braband, Henrik; Fox, Thomas; Amendola, Valeria

    2012-09-24

    Too hot to handle: Unprecedented affinity and specificity for (99)TcO(4)(-) in aqueous solution was shown with the p-xylyl azacryptand in the hexaprotonated form. A crystal structure of the complex reveals how the anion fits within the cavity of the cage, and the formation of multiple H-bond interactions with protonated amino groups stabilize the adduct.

  8. Computer Simulation of the Process of Quenching Large-Size Parts in Water and Aqueous Solutions

    Institute of Scientific and Technical Information of China (English)

    N.I.Kobasko; W.S.Morhuniuk; V.V.Dobrivecher; A.M.Weinov

    2004-01-01

    The article presents results of the computer simulation of quenching large-size parts in water and aqueous solutions. It has been shown that the main attention should be paid to eliminating film boiling and providing uniform cooling at the surface of the part to be quenched. Simplified formulas for calculating the optimal time of cooling large-size steel parts are presented.

  9. Laser Flash Photolysis and Pulse Radiolysis of Iodate and Periodate in Aqueous Solution

    DEFF Research Database (Denmark)

    Kläning, U K; Sehested, Knud; Wolff, Thomas

    1981-01-01

    Species containing iodine in oxidation state six are formed by photolysis and radiolysis of aqueous iodate and periodate solutions in the following reactions: IO3–+ O–→ IO42–; IO3–+ OH → IO3; IVII+ eaq–→ IeVI and IVII [graphic omitted] I0VI+ O–(or OH). The present pulse radiolysis and laser flash...

  10. Nanoparticle detection in aqueous solutions using Raman and Laser Induced Breakdown Spectroscopy

    NARCIS (Netherlands)

    Sovago, M.; Buis, E.-J.; Sandtke, M.

    2013-01-01

    We show the chemical identification and quantification of the concentration and size of nanoparticle (NP) dispersions in aqueous solutions by using a combination of Raman Spectroscopy and Laser Induced Breakdown Spectroscopy (LIBS). The two spectroscopic techniques are applied to demonstrate the NP

  11. Nanoparticle detection in aqueous solutions using Raman and Laser Induced Breakdown Spectroscopy

    NARCIS (Netherlands)

    Sovago, M.; Buis, E.-J.; Sandtke, M.

    2013-01-01

    We show the chemical identification and quantification of the concentration and size of nanoparticle (NP) dispersions in aqueous solutions by using a combination of Raman Spectroscopy and Laser Induced Breakdown Spectroscopy (LIBS). The two spectroscopic techniques are applied to demonstrate the NP

  12. Removal of boron from aqueous solution using magnesite and bentonite clay composite

    CSIR Research Space (South Africa)

    Masindi, Vhahangwele

    2015-03-01

    Full Text Available and Water Treatment (2015) 1–11 www.deswater.com doi: 10.1080/19443994.2015.1025849 Removal of boron from aqueous solution using magnesite and bentonite clay Composite Vhahangwele Masidi, Mugera W. Gitari, Hlanganani Tutu, Marinda De Beer...: Bentonite clay; Magnesite; Composite; Boron; Kinetics; Adsorption ...

  13. Enzymatic removal of phenols from aqueous solutions by Coprinus cinereus peroxidase and hydrogen peroxide.

    Science.gov (United States)

    Kauffmann, C; Petersen, B R; Bjerrum, M J

    1999-07-30

    The fungal enzyme Coprinus cinereus peroxidase (CIP) can be used for the removal of toxic phenols from water. After treating aqueous solutions of phenols with CIP and H2O2 the phenols polymerized and precipitated. The decrease in phenol concentration was investigated for 10 different phenols. At neutral pH, the investigated phenols were in general removed with high efficiency.

  14. Importance of poly(ethylene glycol) conformation for the synthesis of silver nanoparticles in aqueous solution

    Science.gov (United States)

    In the formation of silver nanoparticles (NPs) using silver nitrate in a poly(ethylene glycol) (PEG) aqueous solution, which acts as both a reducing and stabilizing agent, the PEG chain structure was found to play a significant role. Even though PEG 100 (100 kg/mol) has limited reducing sites of hyd...

  15. A Large Conformational Change of a Bridged β-Cyclodextrin Dimer in Aqueous Solution

    Institute of Scientific and Technical Information of China (English)

    Xiao Qi ZHENG; Yong Hui WANG; Qing Xiang GUO; Li YANG; You Cheng LIU

    2003-01-01

    A novel bridged β-CD dimer in which two β-cyclodextrins were linked by a naphthalene at positions 2 and 7 has been synthesized. 1H and 13CNMR measurements showed that a large change in the conformation of the dimer occurred in aqueous solution. The dimer interacted with methyl and ethyl orange to form stable inclusion complexes via "induced fit" mechanism.

  16. The potential/pH diagram of silver in aqueous ammonium salt solution

    NARCIS (Netherlands)

    Sluyters, J.H.; Wijnen, M.D.; Hul, H.J. van den

    1961-01-01

    The potential/pH diagram of silver in aqueous ammonium salt solution at 25°C has been calculated and verified experimentally. Calculations were carried out on the basis of the standard potential of the silver/silver-ion couple, the dissociation constants of the silver mono- and di-ammonia

  17. Deacidification of oils and fats of biological origine by aqueous solutions of tertiary amines*

    Directory of Open Access Journals (Sweden)

    Peter Siegfried

    2001-01-01

    Full Text Available Deacidification of triacylglycerols by extraction is investigated using aqueous solutions of amines as extractants. Tertiary amines with boiling points ranging between 100° and 170°C, such as 2-methylamino-diethanol, 2-dimethylamino-ethanol, 4-methylmorpholine, 1-dimethylamino-2-propanol etc. were found to be suitable substances. Especially the deacidification by aqueous solutions of 2-dimethylamino-ethanol (DMAE was amply investigated as it is used as an active agent in remedies. Amazingly gelatinous soap stocks are not formed, when the concentration of DMAE exceeds 20% if the free fatty acid content of the oil is below 15%. Two liquid phases are formed in systems composed of triacylglyceroles and aqueous solutions containing 20 to 80% DMAE. Palm oil containing 4.3 wt.% free fatty acids was mixed with an equal amount of an aqueous solution of 30 wt.% DMAE at 60°C. In equilibrium an extract containing 86 wt.% free fatty acids (solvents deducted and a raffinate of 0.09 wt.% free fatty acids are obtained. Loss of neutral oil being 0.7 wt.%.

  18. General-base catalysed hydrolysis and nucleophilic substitution of activated amides in aqueous solutions

    NARCIS (Netherlands)

    Buurma, NJ; Blandamer, MJ; Engberts, JBFN; Buurma, Niklaas J.

    2003-01-01

    The reactivity of 1-benzoyl-3-phenyl-1,2,4-triazole (1a) was studied in the presence of a range of weak bases in aqueous solution. A change in mechanism is observed from general-base catalysed hydrolysis to nucleophilic substitution and general-base catalysed nucleophilic substitution. A slight tend

  19. Kinetics of absorption of carbon dioxide in aqueous MDEA solutions with carbonic anhydrase at 298 K

    NARCIS (Netherlands)

    Penders-van Elk, Nathalie J. M. C.; Derks, Peter W. J.; Fradette, Sylvie; Versteeg, Geert F.

    In present work the absorption of carbon dioxide in aqueous N-methyldiethanolamine (MDEA) solutions with and without the enzyme carbonic anhydrase has been studied in a stirred cell at 298 K, with MDEA concentrations ranging from 0.5 to 4 kmol m(-3) and carbonic anhydrase concentrations ranging from

  20. Removal of patulin from aqueous solutions by propylthiol functionalized SBA-15

    Science.gov (United States)

    The goal of this study is to investigate the ability of functionalized silicas to detoxify aqueous solutions including apple juice contaminated with the regulated mycotoxin patulin. Micelle templated silicas with a specific pore size were synthetically modified to possess propanethiol groups, a func...

  1. Stability of lysozyme in aqueous extremolyte solutions during heat shock and accelerated thermal conditions

    NARCIS (Netherlands)

    Avanti, Christina; Saluja, Vinay; Van Streun, Erwin L. P.; Frijlink, Henderik W.; Hinrichs, Wouter L. J.

    2014-01-01

    The purpose of this study was to investigate the stability of lysozyme in aqueous solutions in the presence of various extremolytes (betaine, hydroxyectoine, trehalose, ectoine, and firoin) under different stress conditions. The stability of lysozyme was determined by Nile red Fluorescence Spectrosc

  2. Performance of multiwall carbon nanotubes for removal phenol from aqueous solutions

    Directory of Open Access Journals (Sweden)

    Mohamad Hadi Dehghani

    2013-05-01

    Conclusion: It is concluded that carbon nanotubes being effective in a wide range of pH, short time to reach equilibrium and the absence of competing ions on the absorption process can be used effectively in removing phenol from aqueous solution.

  3. Solubility of N2O in and density, viscosity, and surface tension of aqueous piperazine solutions

    NARCIS (Netherlands)

    Derks, P. W.; Hogendoorn, K. J.; Versteeg, G. F.

    2005-01-01

    The physical solubility of N2O in and the density and viscosity of aqueous piperazine solutions have been measured over a temperature range of (293.15 to 323.15) K for piperazine concentrations ranging from about (0.6 to 1.8) kmol·mr-3. Furthermore, the present study contains experimental surface

  4. Polymers for enhanced oil recovery : A paradigm for structure-property relationship in aqueous solution

    NARCIS (Netherlands)

    Wever, D. A. Z.; Picchioni, F.; Broekhuis, A. A.

    2011-01-01

    Recent developments in the field of water-soluble polymers aimed at enhancing the aqueous solution viscosity are reviewed. Classic and novel associating water-soluble polymers for enhanced oil recovery (EOR) applications are discussed along with their limitations. Particular emphasis is placed on th

  5. Solubility of N2O in and density, viscosity, and surface tension of aqueous piperazine solutions

    NARCIS (Netherlands)

    Derks, P. W.; Hogendoorn, K. J.; Versteeg, G. F.

    2005-01-01

    The physical solubility of N2O in and the density and viscosity of aqueous piperazine solutions have been measured over a temperature range of (293.15 to 323.15) K for piperazine concentrations ranging from about (0.6 to 1.8) kmol·mr-3. Furthermore, the present study contains experimental surface t

  6. STEREOCHEMICAL ASPECTS OF HYDRATION OF CARBOHYDRATES IN AQUEOUS-SOLUTIONS .3. DENSITY AND ULTRASOUND MEASUREMENTS

    NARCIS (Netherlands)

    GALEMA, SA; HOILAND, H

    1991-01-01

    Density and ultrasound measurements have been performed in aqueous solutions of pentoses, hexoses, methylpyranosides, and disaccharides as a function of molality of carbohydrate (0-0.3 mol kg-1). Partial molar volumes, partial molar isentropic compressibilities, and hydration numbers have been

  7. Thermodynamics of complexation in an aqueous solution of Tb(III) nitrate at 298 K

    Science.gov (United States)

    Lobacheva, O. L.; Berlinskii, I. V.; Dzhevaga, N. V.

    2017-01-01

    The pH of the formation of hydroxo complexes and hydrates in an aqueous solution of terbium Tb(III) is determined using combined means of potentiometric and conductometric titration. The stability constants of the hydroxo complexes, the products of hydroxide solubility, and the Gibbs energy of terbium hydroxo complex formation are calculated.

  8. Gelation Behavior of 5-Chloro-8-hydroxyquinoline, an Antituberculosis Agent in Aqueous Alcohol Solutions

    OpenAIRE

    Jukka Korpela; Hannu Salo; Erkki Kolehmainen

    2012-01-01

    It was shown that 5-chloro-8-hydroxyquinoline, an antituberculosis agent, gels aqueous alcohol solutions efficiently. Thermal stability and gel-to-sol transition temperature of 1% gel in CD3OD/D2O (2:1) was studied by 1H-NMR. Fibrous structures of four xerogels have been characterized by scanning electron microscope.

  9. The Reaction between Iron(II) Iodide and Potassium Dichromate(VI) in Acidified Aqueous Solution

    Science.gov (United States)

    Talbot, Christopher

    2013-01-01

    This "Science note" teaching lesson explores the possible reaction between the ions in a reaction mixture consisting of iron(II) iodide and potassium dichromate(VI) in acidified aqueous solution. The electrode potentials will be used to deduce any spontaneous reactions under standard thermodynamic conditions (298 K, 1 bar (approximately…

  10. Sorption of Ochratoxin A from aqueous solutions using beta-cyclodextrin-polyurethane polymer

    Science.gov (United States)

    The ability of a cyclodextrin-polyurethane polymer to remove ochratoxin A from aqueous solutions, including wine, was examined by batch rebinding assays and equilibrium sorption isotherms. The results were fit to two parameter models. Freundlich analysis of the sorption isotherm indicates the polyme...

  11. Hydrogen-Atom Attack on Methyl Viologen in Aqueous Solution Studied by Pulse Radiolysis

    DEFF Research Database (Denmark)

    Solar, S.; Solar, W.; Getoff, N.;

    1984-01-01

    Using hydrogen at high pressures of up to 150 bar (0.12 mol dm–3 H2) as an OH scavenger in aqueous MV2+ solutions (pH 1) it is possible to differentiate between two kinds of transient formed simultaneously by H-atom attack on methyl viologen. One of them is assigned to an H adduct on the N atom, ...

  12. AFM study of steel corrosion in aqueous solutions in concrete

    Directory of Open Access Journals (Sweden)

    Díaz-Benito, B.

    2011-03-01

    Full Text Available Early corrosion stages are studied in carbon steel by means of a solution simulating that contained in concrete pores. Non-carbonated solution contains 5% NaCl. The atomic force microscopy (AFM technique is used to study material performance after different immersion times (up to 48 h. Obtained data are compared to electrochemical ones (corrosion potential and polarization resistance. Analysis of images and roughness evolution along time shows that steel initially tends to reach passivity, although the passive layer rapidly loses its protective character due to chloride attack.

    Este trabajo estudia los primeros estados de la corrosión de un acero al carbono en una disolución que simula la existente en los poros del hormigón, sin carbonatar, con un 5% de NaCl. Para ello, se ha empleado la técnica de microscopía de fuerza atómica (AFM, estudiando el comportamiento del material tras diferentes tiempos de inmersión, hasta 48 h, en la disolución. Estos datos se comparan con datos electroquímicos (potencial de corrosión y resistencia de polarización. El análisis de las imágenes y la evolución de la rugosidad con el tiempo muestran que el acero tiende inicialmente a pasivarse, pero la capa pasiva pierde rápidamente su carácter protector debido al ataque de los cloruros.

  13. Degradation of DEET by ozonation in aqueous solution.

    Science.gov (United States)

    Tay, Kheng Soo; Rahman, Noorsaadah Abd; Abas, Mhd Radzi Bin

    2009-08-01

    This study was undertaken in order to understand the factors affecting the degradation of an insect repellent, N,N-diethyl-m-toluamide (DEET) by ozonation. Kinetic studies on DEET degradation were carried out under different operating conditions, such as varied ozone doses, pH values of solution, initial concentrations of DEET, and solution temperatures. The degradation of DEET by ozonation follows the pseudo-first-order kinetic model. The rate of DEET degradation increased exponentially with temperature in the range studied (20-50 degrees C) and in proportion with the dosage of ozone applied. The ozonation of DEET under different pH conditions in the presence of phosphate buffer occurred in two stages. During the first stage, the rate constant, k(obs), increased with increasing pH, whereas in the second stage, the rate constant, k(obs2), increased from pH 2.3 up to 9.9, however, it decreased when the pH value exceeded 9.9. In the case where buffers were not employed, the k(obs) were found to increase exponentially with pH from 2.5 to 9.2 and the ozonation was observed to occur in one stage. The rate of degradation decreased exponentially with the initial concentration of DEET. GC/MS analysis of the by-products from DEET degradation were identified to be N,N-diethyl-formamide, N,N-diethyl-4-methylpent-2-enamide, 4-methylhex-2-enedioic acid, N-ethyl-m-toluamide, N,N-diethyl-o-toluamide, N-acetyl-N-ethyl-m-toluamide, N-acetyl-N-ethyl-m-toluamide 2-(diethylamino)-1-m-tolylethanone and 2-(diethylcarbamoyl)-4-methylhex-2-enedioic acid. These by-products resulted from ozonation of the aliphatic chain as well as the aromatic ring of DEET during the degradation process.

  14. Hydrogen Evolution by Plasma Electrolysis in Aqueous Solution

    Science.gov (United States)

    Mizuno, Tadahiko; Akimoto, Tadashi; Azumi, Kazuhisa; Ohmori, Tadayoshi; Aoki, Yoshiaki; Takahashi, Akito

    2005-01-01

    Hydrogen has recently attracted attention as a possible solution to environmental and energy problems. If hydrogen should be considered an energy storage medium rather than a natural resource. However, free hydrogen does not exist on earth. Many techniques for obtaining hydrogen have been proposed. It can be reformulated from conventional hydrocarbon fuels, or obtained directly from water by electrolysis or high-temperature pyrolysis with a heat source such as a nuclear reactor. However, the efficiencies of these methods are low. The direct heating of water to sufficiently high temperatures for sustaining pyrolysis is very difficult. Pyrolysis occurs when the temperature exceeds 4000°C. Thus plasma electrolysis may be a better alternative, it is not only easier to achieve than direct heating, but also appears to produce more hydrogen than ordinary electrolysis, as predicted by Faraday’s laws, which is indirect evidence that it produces very high temperatures. We also observed large amounts of free oxygen generated at the cathode, which is further evidence of direct decomposition, rather than electrolytic decomposition. To achieve the continuous generation of hydrogen with efficiencies exceeding Faraday efficiency, it is necessary to control the surface conditions of the electrode, plasma electrolysis temperature, current density and input voltage. The minimum input voltage required induce the plasma state depends on the density and temperature of the solution, it was estimated as 120 V in this study. The lowest electrolyte temperature at which plasma forms is ˜75°C. We have observed as much as 80 times more hydrogen generated by plasma electrolysis than by conventional electrolysis at 300 V.

  15. Homotopy perturbation method for Ozone decomposition of the second order in aqueous solutions

    Directory of Open Access Journals (Sweden)

    Ayati Z.

    2015-05-01

    Full Text Available In this article the problem of mass transfer of ozone of the second order from a gaseous phase into an aqueous phase has been studied. Homotopy perturbation method is employed to derive an analytical approximation to the solutions of the system of differential equations governing on the problem. Some parametric studies have been included. The effects of the temperature and hydroxyl ion reaction order to the solutions are illustrated by some plots

  16. Investigating self-assembly and metal nanoclusters in aqueous di-block copolymers solutions

    CERN Document Server

    Lo Celso, F; Triolo, R; Triolo, A; Strunz, P; Bronstein, L; Zwanziger, J; Lin, J S

    2002-01-01

    Self-assembling properties of di-block copolymers/ surfactant hybrids in aqueous solution can be exploited to obtain metal nanoparticles stable dispersion. Results will be presented here for polystyrene-block-poly(ethylene oxide) solutions. A SANS structural investigation has been performed over different molecular weights of both hydrophilic and hydrophobic block, by varying temperature and concentration of the copolymer. A SAXS characterization of micellar systems containing Pt nanoparticles is reported. (orig.)

  17. THE REMOVAL OF DYE STUFF FROM AQUEOUS SOLUTIONS USING ACTIVATED BENTONITE

    Directory of Open Access Journals (Sweden)

    Mehmet MAHRAMANLIOĞLU

    2004-02-01

    Full Text Available An activated clay was used as adsorbent for the adsorption of astrozone red from aqueous solution.The Langmuir and Freundlich isotherm constants were determined and the effects of contact time, initial concentration and particle size were studied. The effect of temperature on the adsorption was examined and the thermodynamic parameters were determined. Besides the batch studies, the adsorption of astrozon red was studied using fixd bed column. The effect of solution rate on the adsorption capacity was also studied.

  18. Removal of lead and zinc ions from aqueous solutions using clinoptilolite

    OpenAIRE

    Golomeova, Mirjana; Zendelska, Afrodita; Krstev, Boris; Golomeov, Blagoj; Blažev, Krsto

    2014-01-01

    The removed of lead and zinc ions from synthetic aqueous solutions was performed using clinoptilolite. In order to determine the effectivity of clinoptilolite a series of experiments were performed under batch conditions from single ion solutions. Experiments were carried out at different initial ions concentration, different initial pH values and different adsorbent mass. The adsorption kinetics is reasonably fast. It means that in the first 20 min approximately 90% o...

  19. Removal of Organic Dyes from Aqueous Solutions with Surfactant-Modified Magnetic Nanoparticles

    OpenAIRE

    Wybieralska Katarzyna; Wajda Anna

    2014-01-01

    The paper presents the results of studies on the possibility of using magnetic nanoparticles modified with selected hydrophobic surfactants for model post-production water purification. Colloidal solutions of iron hydroxide (III) and iron oxide (II and III) were obtained and their particles were subjected to surface modification using surfactants. Thus obtained magnetic fluids were used as active agents in the process of removing selected organic dyes from their aqueous solutions. The effecti...

  20. REMOVAL OF ASTROZON RED FROM AQUEOUS SOLUTIONS BY THE ADSORBENTS PRODUCED FROM LIGNITE COAL

    Directory of Open Access Journals (Sweden)

    Mehmet MAHRAMANLIOĞLU

    2002-01-01

    Full Text Available The adsorption of Astrozone Red on the activated coal from aqueous solutions was studied.The adsorption process followed the Lagergren first order kinetics equation. The adsorbent concentration affected the adsorption of Astrozone Red significiantly.The equilibrium data fit well in the Langmuir model and isotherm constants were calculated. The adsorption of Astrozon Red increased with increase of the pH value in the solution.The thermodynamics of adsorption indicated spontaneous and exothermic nature of the process.