WorldWideScience

Sample records for hendel control programs

  1. Design study on the helium engineering demonstration loop (HENDEL)

    International Nuclear Information System (INIS)

    Aochi, Tetsuo; Yasuno, Takehiko; Muto, Yasushi; Suzuki, Kunihiko

    1977-11-01

    Four reference studies made on Helium Engineering Demonstration Loop (HENDEL) are described. HENDEL is used in confirmation of the designs of VHTR components such as reactor structure, core structure, intermediate heat exchanger and piping. It consists of mother loop, adapter section and four test sections for fuel stack, reactor support and insulation structure, core structure and high temperature heat transfer component respectively. System and component designs of the mother and adapter section and preliminary designs of the four test sections are shown. And, the plans of operation, instrumentation, control, safety, utilities (electricity, cooling water and helium gas) and construction schedule of HENDEL and research and development of the test sections are also briefed. (auth.)

  2. HENDEL

    International Nuclear Information System (INIS)

    Yasuno, Takehiko; Sanokawa, Konomo

    1986-01-01

    The multi-purpose high temperature gas-cooled experimental reactor project in Japan Atomic Energy Research Institute aims at the coolant temperature at the reactor exit as very high as 950 deg C, and includes the development of many high temperature structures such as fuel elements, in-core structures, high temperature pipings, intermediate heat exchangers and steam generators. Prior to the incorporation in the experimental reactor, for confirming the basic performance and the safety, it is important to test these high temperature structures under the actual conditions using the full scale models. The helium engineering demonstration loop (HENDEL) was planned for the purpose like this. The tests to be carried out by using the HENDEL, the construction and operation of the mother-adapter section, the fuel assembly stack verifying test continued since March, 1983, and the in-core structure verifying test which is started in June, 1986, are reported. The experimental reactor project was changed to the test and research reactor project to verify the safety, to aim at the improvement of thermal efficiency and the utilization of high temperature heat, and to heighten the reactor performance. (Kako, I.)

  3. An overview of helium engineering demonstration loop (HENDEL) 1982

    International Nuclear Information System (INIS)

    Izawa, Naoki; Inagaki, Yoshiyuki; Tanaka, Toshiyuki; Hishida, Makoto; Shimomura, Hiroaki; Okamoto, Yoshizo

    1982-09-01

    The Helium Engineering Demonstration Loop (HENDEL) for proof testing of a large scale model of the VHTR components under simulated reactor operation conditions has been constructed at JAERI. This paper presented is markedly focused on the detail description of HENDEL facilities, including Mother (M), Adapter (A) and Test sections (T 1 -- T 4 ). (author)

  4. Construction and performance tests of Helium Engineering Demonstration Loop (HENDEL) for VHTR

    International Nuclear Information System (INIS)

    Hishida, M.; Tanaka, T.; Shimomura, H.; Sanokawa, K.

    1984-01-01

    A helium engineering demonstration loop (HENDEL) was constructed and operated in JAERI in order to develop the high-temperature key components of an experimental very high temperature gas cooled reactor, like fuel stack, in-core reactor structure, hot gas duct, intermediate heat exchanger. Performance tests as well as demonstration of integrity are carried out with large-size or actual-size models of key components. The key components to be tested in HENDEL are: fuel stack and control rod; core supporting structure, or bottom structure of rector core exposed to direct impingement of high temperature core outlet flow; reactor internal components and structure; high temperature components in heat removal system (primary and secondary cooling systems)

  5. Construction of helium engineering demonstration loop (HENDEL M+A) for VHTR

    International Nuclear Information System (INIS)

    Shimomura, Saneaki; Tanaka, Toshiyuki; Nakano, Tadasuke

    1983-01-01

    The mother and adapter sections of the large structural component demonstration test loop, alias Helium Engineering Demonstration Loop, for the multipurpose, high temperature gas-cooled experimental reactor were completed in March, 1982. This facility was constructed by Fuji Electric Co., Ltd. and Kawasaki Heavy Industries Ltd. as the main contractors, and by the cooperation with Mitsubishi Heavy Industries Ltd. and Ishikawajima Harima Heavy Industries Co., Ltd. The HENDEL M+A is the testing facility of the largest scale in the world, which can handle 1000 deg C, 40 kgf/cm 2 G helium at a half flow rate of one core cooling loop of the experimental reactor. With the HENDEL M+A, the demonstration tests of fuel assembly stacks, in-core structures, large flow rate and high temperature equipment are planned. The HENDEL M+A comprises two mother loops, an adapter loop, and common auxiliary systems fon measurement and control (In), refining (Mp), makeup (Mu) and cooling water (Uc). The construction and function of such main equipment as a heater, circulators and internally insulated piping are described. The progress of the construction and the main experience during the construction, the process of operation and the performance are reported. (Kako, I.)

  6. Genetic Variation among the White-striped Bactrocera dorsalis (Hendel) in Comparison with a Trok Nong-derived Population

    International Nuclear Information System (INIS)

    Boonsirichai, Kanokporn; Segsarnviriya, Suchada; Limohpasmanee, Wanitch; Kongratarpon, Titima; Thannarin, Thodsapol; Sungsinleart; Kwanpisut

    2011-06-01

    Full text: A white-striped strain of Bactrocera dorsalis (Hendel) had been developed for the fruit fly population control using the radiation-induced sterile insect technique (SIT). This report aimed at elucidating the inheritance of the white-striped phenotype and the genetic differences between the white-striped strain and the strain derived from Trok Nong sub district, Khlung district, Chantaburi. The white-striped phenotype appeared recessive to the wild type. Meanwhile, twelve ISSR primers yielded DNA bands with significantly different frequencies between the two populations. The analysis indicated four DNA bands which were absent from the white-striped population but apparent at frequencies 0.4 to 0.9 among the Trok Nong-derived population. Another four DNA bands were found absent from the Trok Nong-derived population but existed at frequencies 0.3 to 0.5 among the white-striped population. These data may benefit the monitoring of gene flow from the white-striped fruit flies to the natural population when released in a SIT program. Keywords: Bactrocera dorsalis (Hendel), SIT, genetic

  7. The utility of microsatellite DNA markers for the evaluation of area-wide integrated pest management using SIT for the fruit fly, Bactrocera dorsalis (Hendel), control programs in Thailand.

    Science.gov (United States)

    Aketarawong, Nidchaya; Chinvinijkul, Suksom; Orankanok, Watchreeporn; Guglielmino, Carmela Rosalba; Franz, Gerald; Malacrida, Anna Rodolfa; Thanaphum, Sujinda

    2011-01-01

    The oriental fruit fly, Bactrocera dorsalis (Hendel), is a key pest that causes reduction of the crop yield within the international fruit market. Fruit flies have been suppressed by two Area-Wide Integrated Pest Management programs in Thailand using Sterile Insect Technique (AW-IPM-SIT) since the late 1980s and the early 2000s. The projects' planning and evaluation usually rely on information from pest status, distribution, and fruit infestation. However, the collected data sometimes does not provide enough detail to answer management queries and public concerns, such as the long term sterilization efficacy of the released fruit fly, skepticism about insect migration or gene flow across the buffer zone, and the re-colonisation possibility of the fruit fly population within the core area. Established microsatellite DNA markers were used to generate population genetic data for the analysis of the fruit fly sampling from several control areas, and non-target areas, as well as the mass-rearing facility. The results suggested limited gene flow (m flies in the control areas and flies captured outside. In addition, no genetic admixture was revealed from the mass-reared colony flies from the flies within the control area, which supports the effectiveness of SIT. The control pests were suppressed to low density and showed weak bottleneck footprints although they still acquired a high degree of genetic variation. Potential pest resurgence from fragmented micro-habitats in mixed fruit orchards rather than pest incursion across the buffer zone has been proposed. Therefore, a suitable pest control effort, such as the SIT program, should concentrate on the hidden refuges within the target area.

  8. Summary of facility and operating experience on helium engineering demonstration loop (HENDEL)

    Energy Technology Data Exchange (ETDEWEB)

    Ouchi, Yoshihiro; Fujisaki, Katsuo; Kobayashi, Toshiaki; Kato, Michio; Ota, Yukimaru; Watanabe, Syuji; Kobayashi, Hideki; Mogi, Haruyoshi [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

    1996-07-01

    The HENDEL is a test facility to perform full scale demonstration tests on the core internals and high temperature components for the High Temperature Engineering Test Reactor(HTTR). The main systems consist of Mother(M) and Adapter(A), fuel stack Test(T{sub 1}) and in-core structure Test(T{sub 2}) sections. The (M+A) section can supply high temperature helium gas to the test section. The M+A section completed in March 1982 has been operated for about 22900 hours till February 1995. The T{sub 1} and T{sub 2} sections, completed in March 1983 and June 1986, have been operated for about 19400 and 16700 hours, respectively. In this period, a large number of tests have been conducted to verify the performance and safety features of the HTTR components. The results obtained from these tests have been effectively applied to the detailed design, licensing procedures and construction of the HTTR. The operating experience of the HENDEL for more than 10 years also brought us establishment of the technique of operation of a large scale helium gas loop, handling of helium gas and maintenance of high temperature facilities. The technique will be available for the operation of the HTTR. This paper mainly describes the summary of plant facirities, operating experience and maintenance on the HENDEL. (author)

  9. Studies on mating competitiveness of sterile oriental fruit fly, Bactrocera dorsalis (Hendel)

    International Nuclear Information System (INIS)

    Limohpasmanee, W.; Segsarnviriya, S.

    1998-01-01

    An essential prerequisite for insect control by the sterile insect technique releasing method is mass rearing and sterilizing that do not have adverse effects on longevity and mating behavior of the released males. But many laboratory studies have shown that males irradiated at the completely sterility dose often could not compete with untreated males in mating. This paper studies the effects of gamma radiation at the sterile dose on mating, sexual and sperm competitiveness of the oriental fruit fly, Bactrocera dorsalis (Hendel) under the laboratory condition. It is found that irradiation at the completely sterility dose (90 Gy) had reduced the mating and sperm competition ability of the males. Though the sexual competition was not

  10. Case 3693 Cryptodacus Hendel, 1914 (Insecta: Diptera: Tephritidae): Proposed suppression of Cryptodacus Gundlach, 1862 (Reptilia, Serpentes, Colubridae)

    Science.gov (United States)

    Norrbom, Allen L.; McDiarmid, Roy W.; Chen, Xiao-Lin; David, King J.; De Meyer, Marc; Freidberg, Amnon; Han, Ho-Yeon; Steck, Gary J.; Thompson, F. Christian; White, Ian M.; Zucchi, Roberto A.

    2015-01-01

    The purpose of this application, under Article 23.9.3, is to conserve current usage of the well-established genus-group name Cryptodacus Hendel, 1914 for a genus of Neotropical fruit flies by suppression of the earlier, unused name Crypto- dacus Gundlach, 1862, currently a junior synonym of Arrhyton Günther, 1858, a genus of snakes, under the plenary power of the Commission, in the interest of nomenclatural stability. Cryptodacus Gundlach has not been used as a valid name since 1883, whereas Cryptodacus Hendel has been used in a significant body of literature relating to fruit fly systematics, morphology and phylogeny and is the currently used name in various name and molecular databases. 

  11. Cooling performance of helium-gas/water coolers in HENDEL

    International Nuclear Information System (INIS)

    Inagaki, Yoshiyuki; Takada, Shoji; Hayashi, Haruyoshi; Kobayashi, Toshiaki; Ohta, Yukimaru; Shimomura, Hiroaki; Miyamoto, Yoshiaki

    1994-01-01

    The helium engineering demonstration loop (HENDEL) has four helium-gas/water coolers where the cooling water flows in the tubes and helium gas on the shell side. Their cooling performance was studied using the operational data from 1982 to 1991. The heat transfer of helium gas on the shell was obtained for segmental and step-up baffle type coolers. Also, the change with operation time was investigated. The cooling performance was lowered by the graphite powder released from the graphite components for several thousand hours and thereafter recovered because the graphite powder from the components was reduced and the powder in the cooler shell was blown off during the operation. (orig.)

  12. Achievement of Eradication of the Solanum Fruit Fly, Bactrocera Latifrons (Hendel) from Yonaguni Island, Okinawa, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Fukugasako, Akira [Plant Protection Division, Food Safety and Consumer Affairs Bureau, Ministry of Agriculture, Forestry and Fisheries (Japan); Okamoto, Masahiro [Naha Plant Protection Station, Ministry of Agriculture, Forestry and Fisheries (Japan)

    2014-01-15

    Full text: Solanum fruit fly, Bactrocera latifrons (Hendel), (hereinafter referred to as SFF) was recorded for the first time from Yonaguni Islands (westernmost island of Japan located near Taiwan) on August 1984. After that record, SFF was not detected from 1987 to 1998 in Okinawa Prefectural Government (OPG) survey. Infested fruits by SFF were collected again on October, 1999, and SFF was found to be present throughout the Island in 2004 and OPG issued pest alert on SFF in the same year. The Ministry of Agriculture, Forestry and Fisheries (MAFF) issued the notice on November, 2004 based on the Plant Protection Law to order OPG to control SFF and to prevent the spread of SFF to Japan's mainland. OPG inaugurated SFF control program (including development of technologies for suppression and Sterile Insect Technique (SIT) use and implementation of suppression and SIT control) on October, 2004. As a result of the eradication program, no SFF has been recorded since 2004. Naha Plant Protection Station (branch of NPPO in Naha, Okinawa Pref. = Naha PPS) conducted confirmation surveys in 2011 (April - June) MAFF, based on the result of confirmation surveys by Naha PPS, declared the eradication on 19th of August in 2011 after authorization by experts. OPG successfully achieved the eradication of SFF by applying SIT for the first time in the world against this pest. The SFF control program by OPG is as follows: (1) Suppression control: Protein bait spraying and host plants removal were conducted from Oct., 2004 to Dec., 2006 to reduce the population prior to conducting SIT control. (2) SIT R and D and control: Several technologies and other things related to SIT control were developed or determined (2004 to 2007). These include development of artificial diet for SFF mass rearing, determination of both appropriate irradiation dose and developmental stage for SFF colony. Nurturing of SFF transport adapted for artificial egging devices, carrying method of SFF from Naha city to

  13. Quality of the oriental fruit fly, bactrocera dorsalis (Hendel) after sifting pupae by mechanical sifter

    International Nuclear Information System (INIS)

    Sutantawong, M.; Uthaisarn, K.

    1996-01-01

    Quality of fruit fly, bactrocera dorsalis (Hendel) in mass production is important for controlling pest populations by means of the sterile insect technique. The experiment was to study the quality of fruit fly after sifting pupae by mechanical sifter. Laboratory-reared pupae, held at 26 ± 1 degree C were sifted at intensity of 18 rpm in a rotary sifting device at 1, 2, 3, 4, 5, 6, 7 and 8 days of age. The quality of fruit flies were determined on adult eclosion and flight capability. The results showed that there were no significantly different (P < 0.05) in adult eclosion between control with sifted pupae at 1 to 8 days of age. However, there were significantly different (P < 0.05) in flight capability between control and sifted pupae at 1, 5, 6, 7, 8 days of age with sifted pupae at 2, 3, 4 days of age

  14. Construction of In-core Structure Test Section in HENDEL, (1)

    International Nuclear Information System (INIS)

    Kunitomi, Kazuhiko; Inagaki, Yoshiyuki; Ioka, Ikuo; Kondoh, Yasuo; Nekoya, Shinichi; Miyamoto, Yoshiaki; Akisada, Toshihiro; Yamaguchi, Shigeru.

    1988-01-01

    An In-core Structure Test Section (T 2 ) in Helium Engineering Demonstration Loop (HENDEL) simulates a part of the core bottom structure with the same scale as that of a high temperature engineering test reactor (HTTR) designed in Japan Atomic Energy Research Institute. The design and construction of T 2 test section were started in March 1983, and completed in June 1986. The main objectives of the T 2 test section are to verify thermal-hydraulic performance and integrity of the core bottom structure. The report describes the general outline of T 2 test section, and experience gained from construction and preliminary test with regard to the simulated core bottom structure. (author)

  15. Pre and post harvest IPM for the mango fruit fly, Bactrocera dorsalis (Hendel)

    International Nuclear Information System (INIS)

    Verghese, Abraham; Sreedevi, K.; Nagaraju, D.K.

    2006-01-01

    The fruit fly, Bactrocera dorsalis (Hendel) is a major pest of mango in India. So, investigations were carried out to standardize an Integrated Pest Management (IPM) for fruit fly-free and residue-free mango fruits. The study required orchard and laboratory studies, which were conducted on the commercial variety Banganapalli, at the Indian Institute of Horticultural Research, Hessaraghatta Lake P.O., Bangalore, India, during 2004 and 2005. Results showed that a pre harvest IPM combination of male annihilation technique (MAT) (using methyl eugenol as a lure) + sanitation brought down B. dorsalis infestation to 5.00% from an infestation ranging from 17 to 66% in control in both years. An additional cover spray of Decamethrin 2.8EC 0.5ml/l (which is half the recommended dose) + Azadirachtin (0.03 %) 2ml/l (neem based botanical) gave 100% control in both the years. Post harvest treatments with hot water at 48 degree C for 60 and 75 min resulted in 100% control at both the time regimes in 2004 and 2005. The untreated fruits, which were also exposed to gravid females (but not treated in hot water) showed 30% and 5.5% infestations, respectively, in 2004 and 2005. (author)

  16. Pre and post harvest IPM for the mango fruit fly, Bactrocera dorsalis (Hendel)

    Energy Technology Data Exchange (ETDEWEB)

    Verghese, Abraham; Sreedevi, K.; Nagaraju, D.K., E-mail: avergis@iihr.ernet.i [Indian Institute of Horticultural Research, Bangalore, Karnataka (India)

    2006-07-01

    The fruit fly, Bactrocera dorsalis (Hendel) is a major pest of mango in India. So, investigations were carried out to standardize an Integrated Pest Management (IPM) for fruit fly-free and residue-free mango fruits. The study required orchard and laboratory studies, which were conducted on the commercial variety Banganapalli, at the Indian Institute of Horticultural Research, Hessaraghatta Lake P.O., Bangalore, India, during 2004 and 2005. Results showed that a pre harvest IPM combination of male annihilation technique (MAT) (using methyl eugenol as a lure) + sanitation brought down B. dorsalis infestation to 5.00% from an infestation ranging from 17 to 66% in control in both years. An additional cover spray of Decamethrin 2.8EC 0.5ml/l (which is half the recommended dose) + Azadirachtin (0.03 %) 2ml/l (neem based botanical) gave 100% control in both the years. Post harvest treatments with hot water at 48 degree C for 60 and 75 min resulted in 100% control at both the time regimes in 2004 and 2005. The untreated fruits, which were also exposed to gravid females (but not treated in hot water) showed 30% and 5.5% infestations, respectively, in 2004 and 2005. (author)

  17. A review of recorded host plants of Oriental Fruit Fly, Bactrocera (Bactrocera)dorsalis(Hendel)(Diptera: Tephritidae), version 3.0

    Science.gov (United States)

    Bactrocera (Bactrocera) dorsalis (Hendel)(Diptera: Tephritidae), commonly known as the Oriental fruit fly, is regulated through the Plant Protection Act of 2000 (7 U.S.C. 7701-7772) and relevant Parts and Subparts of the Code of Federal Regulations (7 CFR – Agriculture). Presented herein is a compre...

  18. Consideration of heat transfer performance of helium-gas/water coolers in HENDEL

    International Nuclear Information System (INIS)

    Inagaki, Yoshiyuki; Miyamoto, Yoshiaki

    1986-10-01

    The helium engineering loop (HENDEL) has four helium-gas/water coolers, where the cooling water flows in the tubes and the helium gas flows on the shell side. Their cooling performance depends on mainly the heat transfer of helium gas on the shell side. This report describes the operational data of the coolers and the consideration of the heat transfer performance which is important for the design of coolers. It becomes clear that Donohue's equation is close to the operational data and conservative for the segmental baffle type cooler and preduction by Fishenden-Saunders or Zukauskas' equation is conservation for the step-up baffle type cooler. (author)

  19. Primeiro registro de Tomoplagia reimoseri Hendel e Xanthaciura mallochi Aczél (Diptera: Tephritidae para o Estado de Santa Catarina, Brasil First records of Tomoplagia reimoseri Hendel e Xanthaciura mallochi Aczél (Diptera: Tephritidae for Santa Catarina state, Brazil

    Directory of Open Access Journals (Sweden)

    Sandra Mara Sabedot

    2008-09-01

    Full Text Available O presente trabalho tem como objetivo levantar as espécies de tefritídeos endófagos associados a capítulos de asteráceas em Chapecó, Santa Catarina. Para tanto, foram efetuadas coletas quinzenais no município de Chapecó, Santa Catarina, durante o período de setembro de 2005 a setembro de 2006, concentradas na primavera e no verão. Os capítulos foram destacados diretamente das plantas, no campo, e acondicionados em sacos plásticos. Este trabalho constitui o primeiro registro de Tomoplagia reimoseri Hendel e Xanthaciura mallochi Aczél coletados em capítulos de Asteraceae no município de Chapecó, elevando para 72 espécies de tefritídeos registradas para o referido Estado.The present research aimed to inventory the species of endophagous tephritids associated to Asteraceae capitula in Chapecó, Santa Catarina. Samples of capitula were collected every two weeks in Chapecó, from september 2005 to september 2006, concentrating efforts on spring and summer. The capitula were collected directly from the plants and conditioned in plastic bags. This research constitutes the first register of Tomoplagia reimoseri Hendel and Xanthaciura mallochi Aczél specimens collected from Asteraceae capitula in Chapecó, elevating to 72 the number of tephritid species registered to the State of Santa Catarina.

  20. Thermal performance test of the hot gas ducts of HENDEL

    International Nuclear Information System (INIS)

    Hishida, M.; Kunitomi, K.; Ioka, I.; Umenishi, K.; Tanaka, T.; Shimomura, H.; Sanokawa, K.

    1984-01-01

    A hot gas duct provided with internal thermal insulation is to be used for high-temperature gas-cooled reactors (HTGR). This type of hot gas duct has not been used so far in industrial facilities, and only a couple of tests on such a large-scale model of a hot gas duct have been conducted. The present report deals with the results of the thermal performance of the single tube type hot gas ducts which are installed as parts of a helium engineering demonstration loop (HENDEL). Uniform temperature and heat flux distribution at the surface of the duct were observed, the experimental correlations being obtained for the effective thermal conductivity of the internal thermal insulation layer. The measured temperature distribution of the pressure tube was in good agreement with the calculation by a TRUMP heat transfer computer code. The temperature distribution of the inner tube of the co-axial hot gas duct was evaluated and no hot spot was detected. These results would be very valuable for the design and development of HTGR. (orig.)

  1. A revision of the shore-fly genus Hydrochasma Hendel (Diptera, Ephydridae).

    Science.gov (United States)

    Mathis, Wayne N; Zatwarnicki, Tadeusz

    2013-01-01

    A revision of the shore-fly genus Hydrochasma Hendel. The species of the genus Hydrochasma Hendel are revised, including 27 new species (type locality in parenthesis): H. andeum (Ecuador. Guayas: Boliche (02°07.7'S, 79°35.5'W)), H. annae (United States. Utah. Grand: Swasey Beach (15.3 km N Green River; 39°07'N, 110°06.6'W; Green River; 1255 m)), H. capsum (Ecuador. Orellana: RíoTiputini (0°38.2'S, 76°8.9'W)), H. castilloi (Ecuador. Loja: Catamayo (03°59'S, 79°21'W)), H. crenulum (Peru. Cuzco: Paucartambo, Atalaya (Río Alto Madre de Dios; 12°53.3'S, 71°21.6'W; 600 m)), H. denticum (Ecuador. Orellana: Río Tiputini (0°38.2'S, 76°8.9'W)), H. digitatum (Peru. Madre de Dios: Diamante (Río Alto Madre de Dios; 12°19.9'S, 70°57.5'W; 400 m)), H. distinctum (Costa Rica. Limón: Parque Nacional Barbilla, Sector Casas Negras, (10°0.8'N, 83°28.1'W; 300 m)), H. dolabrutum (Dominican Republic. Barahona: Barahona (18°12'N, 71°5.3'W)), H. edmistoni (Dominican Republic. Azua: near Pueblo Viejo (18°24.8'N, 70°44.7'W)), H. falcatum (Peru. Madre de Dios: Río Manu, Erika (near Salvación; 12°50.7'S, 71°23.3'W; 550 m)), H. glochium (Dominican Republic. Peravia: San José Ocoa (10 km NE; 18°35'N, 70°25.6'W)), H. kaieteur (Guyana. Kaieteur Falls (05°10.5'N, 59°26.9'W)), H. lineatum (Trinidad and Tobago. Trinidad. St. George: Filette (1 km SE; 10°47'N, 61°21'W)), H. miguelito (Honduras. Cortés: San Pedro Sula (8 km S; 15°25.7'N, 88°01.4'W)), H. octogonum (Ecuador. Manabí: Pichincha (01°02.7'S, 79°49.2'W)), H. parallelum (Trinidad and Tobago. Trinidad. St. Andrew: Lower Manzanilla (16 km S; 10°22'N, 61°01'W)), H. peniculum (Dominican Republic. Pedernales: Pedernales (18°01.8'N, 71°44.7'W)), H. rictum (Honduras. Cortés: San Pedro Sula (8 km S; 15°25.7'N, 88°01.4'W)), H. robustum (Brazil. São Paulo. Ubatuba, Praia Puruba (23°21'S, 44°55.6'W; beach)), H. sagittarium (Trinidad and Tobago. Tobago: St. John: Parlatuvier (creek; 11°17.9'N, 60°35'W

  2. Viability of the miss-sexed female pupae in the process of application of sterile insect technique of male oriental fruit fly, Bactrocera dorsalis (Hendel)

    International Nuclear Information System (INIS)

    Ji Qing'e; Du Yinggang; Hou Weirong; Chen Jiahua

    2008-01-01

    Female pupae came from the genetic sexing strain (GSS) of Bactrocera dorsalis (Hendel) were irradiated by 60 Co at 1d, 2d and 3d separately before emergence and the dosage were 90, 100 and 105Gy. The emergence percentage, flight ability and survival percentage under stress were tested. The irradiated female adults mated with unirradiated males and irradiated males came from GSS after emergence, the number of eggs and egg hatch rates were scored for each treatment at 10d and 17d separately. The results showed that the quality control trend of irradiated female were the same as the irradiated male. The irradiated female did not lay egg when mated with irradiated male. The number of eggs decreased sharp when the irradiated females mated with unirradiated males, and the number of eggs would decrease with the increase of irradiation dosage and decrease of pupae age. (authors)

  3. Thermal performance test of hot gas ducts of helium engineering demonstration loop (HENDEL)

    International Nuclear Information System (INIS)

    Hishida, Makoto; Kunitomi, Kazuhiko; Ioka, Ikuo; Umenishi, Koji; Kondo, Yasuo; Tanaka, Toshiyuki; Shimomura, Hiroaki

    1984-01-01

    A hot gas duct provided with internal thermal insulation is supposed to be used for an experimental very high-temperature gas-cooled reactor (VHTR) which has been developed by the Japan Atomic Energy Research Institute (JAERI). This type of hot gas duct has not been used so far in industrial facilities, and only a couple of tests on such a large-scale model of hot gas duct have been conducted. The present test was to investigate the thermal performance of the hot gas ducts which are installed as parts of a helium engineering demonstration loop (HENDEL) of JAERI. Uniform temperature and heat flux distributions at the surface of the duct were observed, the experimental correlation being obtained for the effective thermal conductivity of the internal thermal insulation layer. The measured temperature distribution of the pressure tube was in good agreement with the calculation by a TRUMP heat transfer computer code. The temperature distribution of the inner tube of VHTR hot gas duct was evaluated, and no hot spot was detected. These results would be very valuable for the design and development of VHTR. (author)

  4. The role of the transformer gene in sex determination and reproduction in the tephritid fruit fly, Bactrocera dorsalis (Hendel).

    Science.gov (United States)

    Peng, Wei; Zheng, Wenping; Handler, Alfred M; Zhang, Hongyu

    2015-12-01

    Transformer (tra) is a switch gene in the somatic sex-determination hierarchy that regulates sexual dimorphism based on RNA splicing in many insects. In tephritids, a Y-linked male determining gene (M) controls sex in the sex-determination pathway. Here, homologues of Drosophila tra and transformer-2 (tra-2) genes were isolated and characterized in Bactrocera dorsalis (Hendel), one of the most destructive agricultural insect pests in many Asian countries. Two male-specific and one female-specific isoforms of B. dorsalis transformer (Bdtra) were identified. The presence of multiple TRA/TRA-2 binding sites in Bdtra suggests that the TRA/TRA-2 proteins are splicing regulators promoting and maintaining, epigenetically, female sex determination by a tra positive feedback loop in XX individuals during development. The expression patterns of female-specific Bdtra transcripts during early embryogenesis shows that a peak appears at 15 h after egg laying. Using dsRNA to knock-down Bdtra expression in the embryo and adult stages, we showed that sexual formation is determined early in the embryo stage and that parental RNAi does not lead to the production of all male progeny as in Tribolium castaneum. RNAi results from adult abdominal dsRNA injections show that Bdtra has a positive influence on female yolk protein gene (Bdyp1) expression and fecundity.

  5. Sealing performance test for main flange of pressure vessel of T2 test section in HENDEL

    International Nuclear Information System (INIS)

    Ioka, Ikuo; Inagaki, Yoshiyuki; Matsumoto, Kiminori; Kondou, Yasuo; Suzuki, Kunihiko; Miyamoto, Yoshiaki; Asami, Masanobu.

    1990-12-01

    A pressure vessel of T 2 test section in helium engineering demonstration loop (HENDEL) was fabricated to the same scale of the reactor pressure vessel made of 2(1/4)Cr-1Mo steel in high temperature engineering test reactor (HTTR). Also, the sealing structure of a main flange of pressure vessel in T 2 test section was composed of the double metal O-rings and Ω-seal which would be used in the sealing structure of HTTR. The sealing performance test for the main flange of the pressure vessel in T 2 test section was carried out to confirm the integrity of sealing structure of a main flange in HTTR. T 2 test section has been operated about 7700 hours in previous 18 cycles. The leakage of helium gas from inner metal O-ring was measured by the static pressurized process under the operating condition of HTTR (helium gas: 400degC, 40kg/cm 2 G, 4gk/s). The calculated leakage of helium gas was less than 9.6x10 -7 atm·cm 3 /sec. From the result, it is expected that the sealing structure of main flange in HTTR would maintain the leak tightness in the life. (author)

  6. Measurement control program

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    A measurement control program for the model plant is described. The discussion includes the technical basis for such a program, the application of measurement control principles to each measurement, and the use of special experiments to estimate measurement error parameters for difficult-to-measure materials. The discussion also describes the statistical aspects of the program, and the documentation procedures used to record, maintain, and process the basic data. The purpose of the session is to enable participants to: (1) understand the criteria for this type of a measurement control program; (2) understand the kinds of physical standards required for the various measurement processes, e.g., weighing, analytical, NDA; (3) understand the need for and importance of a measurement control program; (4) understand the need for special experiments to provide an improved basis for the measurement of difficult-to-measure materials; (5) understand the general scope of the program's statistical aspects; and (6) understand the basis and scope of the documentation procedures

  7. Female-biased attraction of Oriental fruit fly, bactrocera dorsalis (Hendel), to a blend of host fruit volatiles from Terminalia catappa L.

    Science.gov (United States)

    Siderhurst, Matthew S; Jang, Eric B

    2006-11-01

    Coupled gas chromatography-electroantennogram detection (GC-EAD) analysis of volatiles from tropical almond fruit, Terminalia catappa L., revealed 22 compounds that were detected by antennae of oriental fruit fly females, Bactrocera dorsalis (Hendel). Both solid-phase microextraction (SPME) and Porapak Q were used for sampling odors in fruit headspace, with SPME collections producing larger EAD responses from a greater number of compounds. Geranyl acetate and methyl eugenol elicited the largest EAD responses. A synthetic blend containing SPME collected, EAD stimulatory compounds showed female-biased attraction in laboratory wind tunnel bioassays, but heavily male-biased trap captures in a larger olfactometer arena. A nine-component subset of compounds eliciting relatively small EAD responses (EAD minor) and consisting of equal parts ethanol, ethyl acetate, ethyl hexanoate, hexyl acetate, linalyl acetate, ethyl nonanate, nonyl acetate, ethyl cinnamate, and (E)-beta-farnesene, attracted mainly females. This EAD minor blend was as attractive to females and much less attractive to males when compared to torula yeast in field cage experiments using glass McPhail traps. Similar results were obtained with outdoor rotating olfactometer tests in which the EAD minor blend was almost completely inactive for males.

  8. Rearing larvae of the oriental fruit fly, Dacus Dorsalis Hendel on media containing banana or rice bran

    International Nuclear Information System (INIS)

    Poramarcom, R.; Mitchell, S.

    1983-12-01

    Materials available in Thailand were substituted for some of those in the standard medium currently used in rearing larvae of Dacus dorsalis Hendel at the Tropical Fruit and Vegetable Research Laboratory, Honolulu, Hawaii. The purpose of this study is to decrease rearing costs through medium modification in Thailand. Larvae were reared in different media: three media containing banana and the other three containing rice bran, as the main ingredient. Wheat germ flakes and torula yeast were added to at: (1) 7.2 and 3.6% (2) 7.2 and 7.2% and (3) 10.8 and 7.2% by weight respectively. The standard medium comprised the seventh medium. The results showed that higher mean pupal recovery, higher mean pupal weight, and higher mean percentage of adult eclosion were obtained from media containing banana compared to media without banana. Media containing banana, (3) and (1), resulted in a significantly (P=0.05) higher mean pupal recovery, 57.49 and 56.88% respectively. Media containing banana, (2) and (3), resulted in the highest mean pupal weight, 12 and 11.68 mg. respectively. Media containing banana produced pupae with highest percentage of adult eclosion. No significant difference was observed in fecundity and fertility of flies reared in all media. Torula yeast and/or wheat germ flakes did not increase the number or weight of pupae. This study showed that media containing banana was the most suitable media for rearing D. dorsalis larvae. All three media containing rice bran were unsuitable for rearing this insect

  9. Demonstration tests for HTGR fuel elements and core components with test sections in HENDEL

    Energy Technology Data Exchange (ETDEWEB)

    Miyamoto, Yoshiaki; Hino, Ryutaro; Inagaki, Yoshiyuki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment] [and others

    1995-03-01

    In the fuel stack test section (T{sub 1}) of the Helium Engineering Demonstration Loop (HENDEL), thermal and hydraulic performances of helium gas flows through a fuel rod channel and a fuel stack have been investigated for the High-Temperature Engineering Test Reactor (HTTR) core thermal design. The test data showed that the turbulent characteristics appearing in the Reynolds number above 2000: no typical behavior in the transition zone, and friction factors and heat transfer coefficients in the fuel channel were found to be higher than those in a smooth annular channel. Heat transfer behavior of gas flow in a fuel element channel with blockage and cross-flow through a gap between upper and lower fuel elements stacked was revealed using the mock-up models. On the other hand, demonstration tests have been performed to verify thermal and hydraulic characteristics and structural integrity related to the core bottom structure using a full-scale test facility named as the in-core structure test section (T{sub 2}). The sealing performance test revealed that the leakage of low-temperature helium gas through gaps between the permanent reflector blocks to the core was very low level compared with the HTTR design value and no change of the leakage flow rate were observed after a long term operation. The heat transfer tests including thermal transient at shutdown of gas circulators verified good insulating performance of core insulation structures in the core bottom structure and the hot gas duct; the temperature of the metal portion of these structure was below the design value. Examination of the thermal mixing characteristics indicated that the mixing of the hot helium gas started at a hot plenum and finished completely at downstream of the outlet hot gas duct. The present results obtained from these demonstration tests have been practically applied to the detailed design works and licensing procedures of the HTTR. (J.P.N.) 92 refs.

  10. Perspective on BVDV control programs.

    Science.gov (United States)

    Givens, M Daniel; Newcomer, Benjamin W

    2015-06-01

    Programs for control and eradication of bovine viral diarrhea virus (BVDV) are often considered prudent when the expense of a control program within a specified time frame effectively prevents loss due to disease and the expense of control does not exceed the costs associated with infection. In some geographic areas, concerns about animal welfare or desires to reduce antibiotic usage may motivate BVDV control even when control programs are associated with a lack of financial return on investment. In other geographic areas, concerns about financial return on investment may be the key motivating factor in considering implementation of BVDV control programs. Past experiences indicate that systematic, well-coordinated control programs have a clear potential for success, while voluntary control programs in cultures of distributed decision-making often result in notable initial progress that ultimately ends in dissolution of efforts. Segmentation of the cattle industry into cow-calf producers, stocker/backgrounders, and feedlot operators amplifies the distribution of decision-making regarding control programs and may result in control measures for one industry segment that are associated with significant costs and limited rewards. Though the host range of BVDV extends well beyond cattle, multiple eradication programs that focus only on testing and removal of persistently infected (PI) cattle have proven to be effective in various countries. While some individuals consider education of producers to be sufficient to stimulate eradication of BVDV, research surrounding the adoption of innovative health care procedures suggests that the process of adopting BVDV control programs has a social element. Collegial interactions and discussions may be crucial in facilitating the systematic implementation necessary to optimize the long-term success of control programs. Compulsory control programs may be considered efficient and effective in some regions; however, in a nation where

  11. Process control program development

    International Nuclear Information System (INIS)

    Dameron, H.J.

    1985-01-01

    This paper details the development and implementation of a ''Process Control Program'' at Duke Power's three nuclear stations - Oconee, McGuire, and Catawba. Each station is required by Technical Specification to have a ''Process Control Program'' (PCP) to control all dewatering and/or solidification activities for radioactive wastes

  12. Characterization of a β-Adrenergic-Like Octopamine Receptor in the Oriental Fruit Fly, Bactrocera dorsalis (Hendel

    Directory of Open Access Journals (Sweden)

    Hui-Min Li

    2016-09-01

    Full Text Available The biogenic amine octopamine plays a critical role in the regulation of many physiological processes in insects. Octopamine transmits its action through a set of specific G-protein coupled receptors (GPCRs, namely octopamine receptors. Here, we report on a β-adrenergic-like octopamine receptor gene (BdOctβR1 from the oriental fruit fly, Bactrocera dorsalis (Hendel, a destructive agricultural pest that occurs in North America and the Asia-Pacific region. As indicated by RT-qPCR, BdOctβR1 was highly expressed in the central nervous system (CNS and Malpighian tubules (MT in the adult flies, suggesting it may undertake important roles in neural signaling in the CNS as well as physiological functions in the MT of this fly. Furthermore, its ligand specificities were tested in a heterologous expression system where BdOctβR1 was expressed in HEK-293 cells. Based on cyclic AMP response assays, we found that BdOctβR1 could be activated by octopamine in a concentration-dependent manner, confirming that this receptor was functional, while tyramine and dopamine had much less potency than octopamine. Naphazoline possessed the highest agonistic activity among the tested agonists. In antagonistic assays, mianserin had the strongest activity and was followed by phentolamine and chlorpromazine. Furthermore, when the flies were kept under starvation, there was a corresponding increase in the transcript level of BdOctβR1, while high or low temperature stress could not induce significant expression changes. The above results suggest that BdOctβR1 may be involved in the regulation of feeding processes in Bactrocera dorsalis and may provide new potential insecticide leads targeting octopamine receptors.

  13. Toy Control Program evaluation.

    Science.gov (United States)

    Stewart, H A; Ormond, C; Seeger, B R

    1991-08-01

    The Toy Control Program for the Apple IIe microcomputer is a software and hardware package developed for the training of single-switch scanning skills. The specially designed scanning programs provide on screen visual feedback and activate a battery-powered toy to reinforce performance. This study examined whether the training of preschool subjects in single-switch scanning skills with the Toy Control Program would result in increased task completion scores and increased levels of attention to task, as compared with conditions of toy activation only and microcomputer programs with screen reinforcement only. The results showed that the subjects paid significantly more attention to the toys as reinforcers (p less than .01). No significant difference was found for the performance results of the three conditions. These findings support the use of a program like the Toy Control Program, which integrates the instructional capabilities of a computer with the reinforcement potential of a toy and the creativity of a therapist.

  14. Control of fruit flies by sterile insect technique. I. Population fluctuation studies of oriental fruit fly (Dacus dorsalis Hendel and Dacus zonatus Saunders) and micro climates at Royal Ang Khang Highland Research Station Chiang Mai

    International Nuclear Information System (INIS)

    Chiravathanapong, S.

    1984-12-01

    The studies of population fluctuation of male oriental fruit fly, (Dacus dorsalis Hendel) and [Dacus zontanus (Saunders)] and micro climate at Royal Ang Khang Highland Research Station Chiang Mai in 1983 were conducted. It was found that population of Dacus zonatus was rather high and almost seemed equal to that of Dacus dorsalis. Population of these two species increased at the beginning of February. Population of Dacus zonatus increased rapidly and reached the peak in the middle of May and of June. The number at peaks were 103 males and 87 males/trap/day respectively. However, the population of Dacus dorsalis increased slowly and followed the pattern of Dacus zonatus until the beginning of June, after that, the population increased rapidly and reached the peak in the middle of July. The number at peak was 240 males/trap/day. Later on they dropped rapidly in the middle of August, then the population of the two species fluctuated together. Finally they decreased down to near zero in November, December and January of the following year. In summary, population density of the said two species adult flies were rather high from the end of winter (the beginning of February) to the middle of raining season (July) and this period coincided with the time of fruit development in many introduced varieties (peach, persimmon, apple, pear and plum)

  15. Angra nuclear plant - environmental control program

    International Nuclear Information System (INIS)

    Kircher, E.; Cruz, E.S. da

    1989-01-01

    The pre-operational studies, that were elaborated before the beginning of Angra I Power Plant operation, are described in particular the environmental radiological safety area till the fuel loading in the core reactor. Several aspects are included, as socio-economic survey, seismological analysis, Meteorological Program, marine biology, water cooling system, exposure measures of natural radiation, marine sediments characterization in the effluent dispersion area and Environmental Radiological Monitoring Program. The main environmental programs developed for the operational phase of the Angra I Plant are also presented, citing some considerations about the Meteorological Program, Marine Biology Control Program, Temperature and Chlorine Control in Piraquara de Fora Bay, Radiological Environmental Monitoring Program, Sanitary Effluent Control Program and Radiological Emergency Program. (C.G.C.). 2 refs

  16. Phenotypes, antioxidant responses, and gene expression changes accompanying a sugar-only diet in Bactrocera dorsalis (Hendel) (Diptera: Tephritidae).

    Science.gov (United States)

    Chen, Er-Hu; Hou, Qiu-Li; Wei, Dan-Dan; Jiang, Hong-Bo; Wang, Jin-Jun

    2017-08-17

    Diet composition (yeast:carbohydrate ratio) is an important determinant of growth, development, and reproduction. Recent studies have shown that decreased yeast intake elicits numerous transcriptomic changes and enhances somatic maintenance and lifespan, which in turn reduces reproduction in various insects. However, our understanding of the responses leading to a decrease in yeast ratio to 0% is limited. In the present study, we investigated the effects of a sugar-only diet (SD) on the gene expression patterns of the oriental fruit fly, Bactrocera dorsalis (Hendel), one of the most economically important pests in the family Tephritidae. RNA sequencing analyses showed that flies reared on an SD induced significant changes in the expression levels of genes associated with specific metabolic as well as cell growth and death pathways. Moreover, the observed upregulated genes in energy production and downregulated genes associated with reproduction suggested that SD affects somatic maintenance and reproduction in B. dorsalis. As expected, we observed that SD altered B. dorsalis phenotypes by significantly increasing stress (starvation and desiccation) resistance, decreasing reproduction, but did not extend lifespan compared to those that received a normal diet (ND) regime. In addition, administration of an SD resulted in a reduction in antioxidant enzyme activities and an increase in MDA concentrations, thereby suggesting that antioxidants cannot keep up with the increase in oxidative damage induced by SD regime. The application of an SD diet induces changes in phenotypes, antioxidant responses, and gene expressions in B. dorsalis. Previous studies have associated extended lifespan with reduced fecundity. The current study did not observe a prolongation of lifespan in B. dorsalis, which instead incurred oxidative damage. The findings of the present study improve our understanding of the molecular, biochemical, and phenotypic response of B. dorsalis to an SD diet.

  17. Environmental Restoration Program Control Management System

    International Nuclear Information System (INIS)

    Duke, R.T.

    1992-01-01

    Environmental Restoration managers need to demonstrate that their programs are under control. Unlike most industrial programs, the public is heavily involved in Environmental Restoration activities. The public is demanding that the country prove that real progress is being made towards cleaning up the environment. A Program Control Management System can fill this need. It provides a structure for planning, work authorization, data accumulation, data analysis and change control. But it takes time to implement a control system and the public is losing its patience. This paper describes critical items essential to the quick development and implementation of a successful control system

  18. Program Baseline Change Control Board charter

    International Nuclear Information System (INIS)

    1993-02-01

    The purpose of this Charter is to establish the Program Baseline Change Control Board (PBCCB) for the Office of Civilian Radioactive Waste Management (OCRWM) Program, and to describe its organization, responsibilities, and basic methods of operation. Guidance for implementing this Charter is provided by the OCRWM Baseline Management Plan (BMP) and OCRWM Program Baseline Change Control Procedure

  19. 15 CFR 752.11 - Internal Control Programs.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Internal Control Programs. 752.11... COMPREHENSIVE LICENSE § 752.11 Internal Control Programs. (a) Scope—(1) Introduction. It is through Internal Control Programs (ICPs) that the SCL holder and the consignee assure that exports and reexports are not...

  20. Computer program CDCID: an automated quality control program using CDC update

    International Nuclear Information System (INIS)

    Singer, G.L.; Aguilar, F.

    1984-04-01

    A computer program, CDCID, has been developed in coordination with a quality control program to provide a highly automated method of documenting changes to computer codes at EG and G Idaho, Inc. The method uses the standard CDC UPDATE program in such a manner that updates and their associated documentation are easily made and retrieved in various formats. The method allows each card image of a source program to point to the document which describes it, who created the card, and when it was created. The method described is applicable to the quality control of computer programs in general. The computer program described is executable only on CDC computing systems, but the program could be modified and applied to any computing system with an adequate updating program

  1. Measurement control program at model facility

    International Nuclear Information System (INIS)

    Schneider, R.A.

    1984-01-01

    A measurement control program for the model plant is described. The discussion includes the technical basis for such a program, the application of measurement control principles to each measurement, and the use of special experiments to estimate measurement error parameters for difficult-to-measure materials. The discussion also describes the statistical aspects of the program, and the documentation procedures used to record, maintain, and process the basic data

  2. RNAi-Mediated Knock-Down of transformer and transformer 2 to Generate Male-Only Progeny in the Oriental Fruit Fly, Bactrocera dorsalis (Hendel).

    Science.gov (United States)

    Liu, Guiqing; Wu, Qiang; Li, Jianwei; Zhang, Guifen; Wan, Fanghao

    2015-01-01

    The transformer (tra) gene appears to act as the genetic switch that promotes female development by interaction with the transformer2 (tra-2) gene in several dipteran species including the Medfly, housefly and Drosophila melanogaster. In this study, we describe the isolation, expression and function of tra and tra-2 in the economically important agricultural pest, the oriental fruit fly, Bactrocera dorsalis (Hendel). Bdtra and Bdtra-2 are similar to their homologs from other tephritid species. Bdtra demonstrated sex-specific transcripts: one transcript in females and two transcripts in males. In contrast, Bdtra-2 only had one transcript that was common to males and females, which was transcribed continuously in different adult tissues and developmental stages. Bdtra-2 and the female form of Bdtra were maternally inherited in eggs, whereas the male form of Bdtra was not detectable until embryos of 1 and 2 h after egg laying. Function analyses of Bdtra and Bdtra-2 indicated that both were indispensable for female development, as nearly 100% males were obtained with embryonic RNAi against either Bdtra or Bdtra-2. The fertility of these RNAi-generated males was subsequently tested. More than 80% of RNAi-generated males could mate and the mated females could lay eggs, but only 40-48.6% males gave rise to progeny. In XX-reversed males and intersex individuals, no clear female gonadal morphology was observed after dissection. These results shed light on the development of a genetic sexing system with male-only release for this agricultural pest.

  3. Auditing measurement control programs

    International Nuclear Information System (INIS)

    Roberts, F.P.; Brouns, R.J.

    1979-10-01

    Requirements and a general procedure for auditing measurement control programs used in special nuclear material accounting are discussed. The areas of measurement control that need to be examined are discussed and a suggested checklist is included to assist in the preparation and performance of the audit

  4. Environmental Restoration Program Management Control Plan

    International Nuclear Information System (INIS)

    1991-09-01

    This Management Control Plan has been prepared to define the Energy Systems approach to managing its participation in the US DOE's Environmental Restoration (ER) Program in a manner consistent with DOE/ORO 931: Management Plan for the DOE Field Office, Oak Ridge, Decontamination and Decommissioning Program; and the Energy Systems Environmental Restoration Contract Management Plan (CMP). This plan discusses the systems, procedures, methodology, and controls to be used by the program management team to attain these objectives

  5. Field estimates of attraction of Ceratitis capitata to Trimedlure and Bactrocera dorsalis (Diptera: Tephritidae) to methyl eugenol in varying environments

    Science.gov (United States)

    Measuring and modeling the attractiveness of semiochemical-baited traps is of significant importance to detection, delimitation and control of invasive pests. Here we describe the results of field mark-release-recapture experiments with Ceratitis capitata (Wiedemann) and Bactrocera dorsalis (Hendel)...

  6. An ALARA-conscious hot particle control program

    International Nuclear Information System (INIS)

    Doolittle, W.W.; Bredvad, R.S.; Bevelacqua, J.J.

    1992-01-01

    In 1989 approximately twenty-five percent of the radiation dose received by the Point Beach Nuclear Plant (PBNP) Health Physics group was due to its hot particle control program. The Health Physics group initiated a review of the program with the objective of decreasing the dose expenditure for hot particle control while maintaining a high standard for hot particle detection and control. In this paper the methods and results of this evaluation are described. The components of the hot particle control program, rules of thumb, and radionuclide composition at PBNP are presented

  7. 18 CFR 12.40 - Quality control programs.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Quality control... PROJECT WORKS Other Responsibilities of Applicant or Licensee § 12.40 Quality control programs. (a... meeting any requirements or standards set by the Regional Engineer. If a quality control program is...

  8. Low Diversity Bacterial Community and the Trapping Activity of Metabolites from Cultivable Bacteria Species in the Female Reproductive System of the Oriental Fruit Fly, Bactrocera dorsalis Hendel (Diptera: Tephritidae

    Directory of Open Access Journals (Sweden)

    Hongyu Zhang

    2012-05-01

    Full Text Available Our goal was to identify the bacteria inhabiting the reproductive system of the female oriental fruit fly, Bactrocera dorsalis (Hendel, and evaluate the chemotaxis of B. dorsalis to the metabolites produced by the bacteria. Based on 16S rRNA-based polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE, 18 operational taxonomic units (OTUs were assigned to the five bacterial classes Betaproteobacteria, Alphaproteobacteria, Gammaproteobacteria, Bacilli and Actinobacteria. Nine OTUs were assigned to Gammaproteobacteria, which was the most highly represented class. Enterobacteriaceae constituted the dominant family, and within this family, three genera and five species were identified, including Enterobacter sakazakii, Klebsiella oxytoca, Klebsiella pneumoniae, Raoultella terrigena and Enterobacter amnigenus. In this set, the first two species were the dominant components, and the latter three species were the minor ones. Finally, we found that the metabolites produced by R. terrigena, K. oxytoca and K. pneumoniae were attractive to the B. dorsalis adults, and in field studies, B. dorsalis adults were most attracted to K. oxytoca. Collectively, our results suggest that the female reproductive system plays an important role in the transfer of enterobacteria from the gut to fruit. Our data may prompt the development of a female-targeted population control strategy for this fly.

  9. AEC controlled area safety program

    Energy Technology Data Exchange (ETDEWEB)

    Hendricks, D W [Nevada Operations Office, Atomic Energy Commission, Las Vegas, NV (United States)

    1969-07-01

    The detonation of underground nuclear explosives and the subsequent data recovery efforts require a comprehensive pre- and post-detonation safety program for workers within the controlled area. The general personnel monitoring and environmental surveillance program at the Nevada Test Site are presented. Some of the more unusual health-physics aspects involved in the operation of this program are also discussed. The application of experience gained at the Nevada Test Site is illustrated by description of the on-site operational and safety programs established for Project Gasbuggy. (author)

  10. AEC controlled area safety program

    International Nuclear Information System (INIS)

    Hendricks, D.W.

    1969-01-01

    The detonation of underground nuclear explosives and the subsequent data recovery efforts require a comprehensive pre- and post-detonation safety program for workers within the controlled area. The general personnel monitoring and environmental surveillance program at the Nevada Test Site are presented. Some of the more unusual health-physics aspects involved in the operation of this program are also discussed. The application of experience gained at the Nevada Test Site is illustrated by description of the on-site operational and safety programs established for Project Gasbuggy. (author)

  11. Radiological control technician: Training program management manual

    International Nuclear Information System (INIS)

    1992-10-01

    This manual defines and describes the DOE Radiological Control Technician Core Training Program qualification and training process, material development requirements, standards and policies, and administration. The manual applies to Radiological Control Technician Training Programs at all DOE contractor sites

  12. Automatic control of commercial computer programs

    International Nuclear Information System (INIS)

    Rezvov, B.A.; Artem'ev, A.N.; Maevskij, A.G.; Demkiv, A.A.; Kirillov, B.F.; Belyaev, A.D.; Artem'ev, N.A.

    2010-01-01

    The way of automatic control of commercial computer programs is presented. The developed connection of the EXAFS spectrometer automatic system (which is managed by PC for DOS) is taken with the commercial program for the CCD detector control (which is managed by PC for Windows). The described complex system is used for the automation of intermediate amplitude spectra processing in EXAFS spectrum measurements at Kurchatov SR source

  13. A quality control program for radiation sources

    International Nuclear Information System (INIS)

    Almeida, C.E. de; Sibata, C.H.; Cecatti, E.R.; Kawakami, N.S.; Alexandre, A.C.; Chiavegatti Junior, M.

    1982-01-01

    An extensive quality control program was established covering the following areas: physical parameters of the therapeutical machines, dosimetric standards, preventive maintenance of radiation sources and measuring instruments. A critical evaluation of this program was done after two years (1977-1979) of routine application and the results will be presented. The fluctuation on physical parameters strongly supports the efforts and cost of a quality control program. This program has certainly improved the accuracy required on the delivery of the prescribed dose for radiotherapy treatment. (Author) [pt

  14. DOE Radiological Control Manual Core Training Program

    International Nuclear Information System (INIS)

    Scott, H.L.; Maisler, J.

    1993-01-01

    Over the past year, the Department of Energy (DOE) Office of Health (EH-40) has taken a leading role in the development of new standardized radiological control training programs for use throughout the DOE complex. The Department promulgated its Radiological Control (RadCon) Manual in June 1992. To ensure consistent application of the criteria presented in the RadCon Manual, standardized radiological control core training courses and training materials have been developed for implementation at all DOE facilities. In producing local training programs, standardized core courses are to be supplemented with site-specific lesson plans, viewgraphs, student handbooks, qualification standards, question banks, and wallet-sized training certificates. Training programs for General Employee Radiological Training, Radiological Worker I and II Training, and Radiological Control Technician Training have been disseminated. Also, training committees under the direction of the Office of Health (EH-40) have been established for the development of additional core training courses, development of examination banks, and the update of the existing core training courses. This paper discusses the current activities and future direction of the DOE radiological control core training program

  15. Sensitivity Analysis of Linear Programming and Quadratic Programming Algorithms for Control Allocation

    Science.gov (United States)

    Frost, Susan A.; Bodson, Marc; Acosta, Diana M.

    2009-01-01

    The Next Generation (NextGen) transport aircraft configurations being investigated as part of the NASA Aeronautics Subsonic Fixed Wing Project have more control surfaces, or control effectors, than existing transport aircraft configurations. Conventional flight control is achieved through two symmetric elevators, two antisymmetric ailerons, and a rudder. The five effectors, reduced to three command variables, produce moments along the three main axes of the aircraft and enable the pilot to control the attitude and flight path of the aircraft. The NextGen aircraft will have additional redundant control effectors to control the three moments, creating a situation where the aircraft is over-actuated and where a simple relationship does not exist anymore between the required effector deflections and the desired moments. NextGen flight controllers will incorporate control allocation algorithms to determine the optimal effector commands and attain the desired moments, taking into account the effector limits. Approaches to solving the problem using linear programming and quadratic programming algorithms have been proposed and tested. It is of great interest to understand their relative advantages and disadvantages and how design parameters may affect their properties. In this paper, we investigate the sensitivity of the effector commands with respect to the desired moments and show on some examples that the solutions provided using the l2 norm of quadratic programming are less sensitive than those using the l1 norm of linear programming.

  16. Program Baseline Change Control Procedure

    International Nuclear Information System (INIS)

    1993-02-01

    This procedure establishes the responsibilities and process for approving initial issues of and changes to the technical, cost, and schedule baselines, and selected management documents developed by the Office of Civilian Radioactive Waste Management (OCRWM) for the Civilian Radioactive Waste Management System. This procedure implements the OCRWM Baseline Management Plan and DOE Order 4700.1, Chg 1. It streamlines the change control process to enhance integration, accountability, and traceability of Level 0 and Level I decisions through standardized Baseline Change Proposal (BCP) forms to be used by the Level 0, 1, 2, and 3 Baseline Change Control Boards (BCCBs) and to be tracked in the OCRWM-wide Configuration Information System (CIS) Database.This procedure applies to all technical, cost, and schedule baselines controlled by the Energy System Acquisition Advisory Board (ESAAB) BCCB (Level 0) and, OCRWM Program Baseline Control Board (PBCCB) (Level 1). All baseline BCPs initiated by Level 2 or lower BCCBs, which require approval from ESAAB or PBCCB, shall be processed in accordance with this procedure. This procedure also applies to all Program-level management documents controlled by the OCRWM PBCCB

  17. Guided Synthesis of Control Programs Using UPPAAL

    DEFF Research Database (Denmark)

    Hune, T.; Larsen, Kim Guldstrand; Pettersson, P.

    2000-01-01

    the transitions with extra guards. Applying this technique have made synthesis of control programs feasible for a plant producing as many as 60 batches. In comparison, we could only handle plants producing two batches without using guides. The synthesized control programs have been executed in a physical plant...

  18. 7 CFR 58.141 - Alternate quality control program.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Alternate quality control program. 58.141 Section 58... Service 1 Quality Specifications for Raw Milk § 58.141 Alternate quality control program. When a plant has in operation an acceptable quality program, at the producer level, which is approved by the...

  19. Graphical programming: On-line robot simulation for telerobotic control

    International Nuclear Information System (INIS)

    McDonald, M.J.; Palmquist, R.D.

    1993-01-01

    Sandia has developed an advanced operational control system approach, caged Graphical Programming, to design and operate robotic waste cleanup and other hazardous duty robotic systems. The Graphical Programming approach produces robot systems that are faster to develop and use, safer in operation, and cheaper overall than altemative teleoperation or autonomous robot control systems. The Graphical Programming approach uses 3-D visualization and simulation software with intuitive operator interfaces for the programming and control of complex robotic systems. Graphical Programming Supervisor software modules allow an operator to command and simulate complex tasks in a graphic preview mode and, when acceptable, command the actual robots and monitor their motions with the graphic system. Graphical Progranuning Supervisors maintain registration with the real world and allow the robot to perform tasks that cannot be accurately represented with models alone by using a combination of model and sensor-based control. This paper describes the Graphical Programming approach, several example control systems that use Graphical Programming, and key features necessary for implementing successful Graphical Programming systems

  20. Angra nuclear plant - environmental control program; Usina Nuclear de Angra: programa de controle ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Kircher, E; Cruz, E.S. da [FURNAS, Rio de Janeiro, RJ (Brazil)

    1990-12-31

    The pre-operational studies, that were elaborated before the beginning of Angra I Power Plant operation, are described in particular the environmental radiological safety area till the fuel loading in the core reactor. Several aspects are included, as socio-economic survey, seismological analysis, Meteorological Program, marine biology, water cooling system, exposure measures of natural radiation, marine sediments characterization in the effluent dispersion area and Environmental Radiological Monitoring Program. The main environmental programs developed for the operational phase of the Angra I Plant are also presented, citing some considerations about the Meteorological Program, Marine Biology Control Program, Temperature and Chlorine Control in Piraquara de Fora Bay, Radiological Environmental Monitoring Program, Sanitary Effluent Control Program and Radiological Emergency Program. (C.G.C.). 2 refs.

  1. Measurement control program for nuclear material accounting

    International Nuclear Information System (INIS)

    Brouns, R.J.; Roberts, F.P.; Merrill, J.A.; Brown, W.B.

    1980-06-01

    A measurement control program for nuclear material accounting monitors and controls the quality of the measurments of special nuclear material that are involved in material balances. The quality is monitored by collecting data from which the current precision and accuracy of measurements can be evaluated. The quality is controlled by evaluations, reviews, and other administrative measures for control of selection or design of facilities, equipment and measurement methods and the training and qualification of personnel who perform SNM measurements. This report describes the most important elements of a program by which management can monitor and control measurement quality

  2. The advanced controls program at Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Knee, H.E.; White, J.D.

    1990-01-01

    The Oak Ridge National Laboratory (ORNL), under sponsorship of the US Department of Energy (DOE), is conducting research that will lead to advanced, automated control of new liquid-metal-reactor (LMR) nuclear power plants. Although this program of research (entitled the ''Advanced Controls Program'') is focused on LMR technology, it will be capable of providing control design, test, and qualification capability for other advanced reactor designs (e.g., the advanced light water reactor [ALWR] and high temperature gas-cooled reactor [HTGR] designs), while also benefiting existing nuclear plants. The Program will also have applicability to complex, non-nuclear process control environments (e.g., petrochemical, aerospace, etc.). The Advanced Controls Program will support capabilities throughout the entire plant design life cycle, i.e., from the initial interactive first-principle dynamic model development for the process, systems, components, and instruments through advanced control room qualification. The current program involves five principal areas of research activities: (1) demonstrations of advanced control system designs, (2) development of an advanced controls design environment, (3) development of advanced control strategies, (4) research and development (R ampersand D) in human-system integration for advanced control system designs, and (5) testing and validation of advanced control system designs. Discussion of the research in these five areas forms the basis of this paper. Also included is a description of the research directions of the program. 8 refs

  3. Measurement control program for new special recovery

    International Nuclear Information System (INIS)

    Hsue, S.T.; Campbell, K.; Barlich, G.

    1987-04-01

    This report summarizes the design of the measurement control (MC) program for the New Special Recovery facility. The MC program is divided into two levels. Level 1 MC checks are performed at the individual instrument computer and will always be functional even when the instrument-control computer is down. The level 1 MCs are divided into statistical checks for both bias and precision, and diagnostic checks. All the instruments are connected on line to an instrument-control computer to which the measurement results can be communicated. Level 2 MC analyses are performed at this computer. The analyses consist of control charts for bias and precision and statistical tests used as analytic supplements to the control charts. They provide the desired detection sensitivity and yet can be interpreted quickly and easily. Recommendations are also made in terms of the frequency of the tests, the standard used, and other operational aspects of the MC program. 16 refs., 11 figs., 10 tabs

  4. Divison of Environmental Control Technology program, 1978

    International Nuclear Information System (INIS)

    1979-06-01

    This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above

  5. Divison of Environmental Control Technology program, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Mott, William E.

    1979-06-01

    This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above.

  6. Stochastic control theory dynamic programming principle

    CERN Document Server

    Nisio, Makiko

    2015-01-01

    This book offers a systematic introduction to the optimal stochastic control theory via the dynamic programming principle, which is a powerful tool to analyze control problems. First we consider completely observable control problems with finite horizons. Using a time discretization we construct a nonlinear semigroup related to the dynamic programming principle (DPP), whose generator provides the Hamilton–Jacobi–Bellman (HJB) equation, and we characterize the value function via the nonlinear semigroup, besides the viscosity solution theory. When we control not only the dynamics of a system but also the terminal time of its evolution, control-stopping problems arise. This problem is treated in the same frameworks, via the nonlinear semigroup. Its results are applicable to the American option price problem. Zero-sum two-player time-homogeneous stochastic differential games and viscosity solutions of the Isaacs equations arising from such games are studied via a nonlinear semigroup related to DPP (the min-ma...

  7. Overview of Japanese control rods development program

    International Nuclear Information System (INIS)

    Koyama, M.

    1984-01-01

    The Japanese control rods development program was established based on the fast breeder reactor program. Therefore, PNC's efforts have been made mainly for the development of analysis, design and fabrication technologies for ''JOYO'' and ''MONJU'' control rods. Laboratory studies were performed to obtain the information for absorber materials. The design and fabrication of the sealed and vented type control rod pins were completed, and water loop tests and in-sodium tests were carried out. Irradiation behavior of enriched B 4 C pellets with low and high density in DFR was examined. Japan's experimental fast reactor, JOYO, has been operated at the rated power of 50MWt and 75MWt since April 1977 when the MK-I core (breeder core) attained initial criticality. Post irradiation examinations on control rod, removed from the reactor, were carried out and their performance behavior were evaluated. In the MK-II core, a control rods monitoring program has been in investigation. Absorber Materials Irradiation Rigs (AMIR) are scheduled to be loaded and irradiated in the JOYO MK-II core from 1984. (author)

  8. Model-Checking Real-Time Control Programs

    DEFF Research Database (Denmark)

    Iversen, T. K.; Kristoffersen, K. J.; Larsen, Kim Guldstrand

    2000-01-01

    In this paper, we present a method for automatic verification of real-time control programs running on LEGO(R) RCX(TM) bricks using the verification tool UPPALL. The control programs, consisting of a number of tasks running concurrently, are automatically translated into the mixed automata model...... of UPPAAL. The fixed scheduling algorithm used by the LEGO(R) RCX(TM) processor is modeled in UPPALL, and supply of similar (sufficient) timed automata models for the environment allows analysis of the overall real-time system using the tools of UPPALL. To illustrate our technique for sorting LEGO(R) bricks...

  9. IADC's well control accreditation program

    International Nuclear Information System (INIS)

    Kropla, S.M.

    1997-01-01

    WellCAP is a well control accreditation program devised and implemented by the International Association of Drilling Contractors (IADC). It is a worldwide comprehensive system that defines a well control training curriculum, establishes minimum standards and recommends guidelines for course structure. The program began in mid-1993 and is viewed as a means for training institutions to demonstrate industry recognition to customers, contractors and local governments. Schools can apply to have their courses accredited. The accreditation system is administered by a review panel. The application process requires that the school perform a detailed review of its curriculum and operations and bring them in line with the WellCAP curriculum and accreditation criteria. Currently, more than 75 schools around the world have requested application materials for WellCAP. To date fifteen schools have been fully accredited

  10. Programming Programmable Logic Controller. High-Technology Training Module.

    Science.gov (United States)

    Lipsky, Kevin

    This training module on programming programmable logic controllers (PLC) is part of the memory structure and programming unit used in a packaging systems equipment control course. In the course, students assemble, install, maintain, and repair industrial machinery used in industry. The module contains description, objectives, content outline,…

  11. Synthetic RNA Controllers for Programming Mammalian Cell Fate and Function

    Science.gov (United States)

    2015-11-04

    Final report for “Synthetic RNA controllers for programming mammalian cell fate and function” Principal Investigator: Christina D. Smolke...SUBTITLE Synthetic RNA controllers for programming mammalian cell fate and function 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER...Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18   2 Synthetic RNA controllers for programming mammalian cell fate and function Task 1

  12. Material control system simulator program reference manual

    Energy Technology Data Exchange (ETDEWEB)

    Hollstien, R.B.

    1978-01-24

    A description is presented of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts. Although MCSS may be used independently in the design or analysis of material handling and processing systems, it has been tailored toward the determination of material accountability and the response of material control systems to adversary action sequences.

  13. Material control system simulator program reference manual

    International Nuclear Information System (INIS)

    Hollstien, R.B.

    1978-01-01

    A description is presented of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts. Although MCSS may be used independently in the design or analysis of material handling and processing systems, it has been tailored toward the determination of material accountability and the response of material control systems to adversary action sequences

  14. Controlled thermonuclear reactions and Tora Supra program

    International Nuclear Information System (INIS)

    1988-01-01

    The research programs for the nuclear energy production by means of thermonuclear fusion are shown. TORA SUPRA, Joint European Torus, Next European Torus and those developed at the Atomic Energy Center are described. The controlled fusion necessary conditions, the energy and confinement balance, and the research of a better tokamak configuration are discussed. A description of TORA SUPRA, the ways of achieving the project and the expected delays are shown. The Controlled Fusion Research Department functions, concerning these programs, are described. The importance of international cooperation and the perspectives about the use of controlled fusion are underlined [fr

  15. Controlled thermonuclear research program

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    The Plasma Physics and Controlled-Fusion Research Program at the Lawrence Berkeley Laboratory is divided into five projects: Plasma Production and Heating Experiments, Plasma Theory, Atomic Physics Studies, the Tormac Project, and Neutral-Beam Development and Technology listed in order of increasing magnitude, as regards manpower and budget. Some cross sections and yields are shown in atomic physics

  16. Impact of introduction of Bactrocera dorsalis (Diptera: Tephritidae) and classical biological control releases of Fopius arisanus (Hymenoptera: Braconidae) on economically important fruit flies in French Polynesia.

    Science.gov (United States)

    Vargas, Roger I; Leblanc, Luc; Putoa, Rudolph; Eitam, Avi

    2007-06-01

    Oriental fruit fly, Bactrocera dorsalis (Hendel) (Diptera: Tephritidae), was discovered on Tahiti Island in July 1996. Eradication programs were conducted from 1997 to 2001, but failed. From 1998 to 2006, B. dorsalis was recovered from 29 different host fruit from the five Society Islands: Tahiti, Moorea, Raiatea, Tahaa, and Huahine. Analysis of coinfestation patterns by B. dorsalis, Bactrocera tryoni (Froggatt), and Bactrocera kirki (Froggatt) suggested B. dorsalis had displaced these two species and become the most abundant fruit fly in coastal areas. To suppress B. dorsalis populations, a classical biological control program was initiated to introduce the natural enemy Fopius arisanus (Sonan) (Hymenoptera: Braconidae) into French Polynesia from Hawaii. Wasps were released and established on Tahiti, Moorea, Raiatea, Tahaa, and Huahine Islands. In guava, Psidium guajava L., collections for Tahiti, F. arisanus parasitism of fruit flies was 2.1, 31.8, 37.5, and 51.9% for fruit collected for 2003, 2004, 2005 and 2006, respectively. Based on guava collections in 2002 (before releases) and 2006 (after releases), there was a subsequent decrease in numbers of B. dorsalis, B. tryoni, and B. kirki fruit flies emerging (per kilogram of fruit) by 75.6, 79.3, and 97.9%, respectively. These increases in F. arisanus parasitism and decreases in infestation were similar for other host fruit. Establishment of F. arisanus is the most successful example of classical biological control of fruit flies in the Pacific area outside of Hawaii and serves as a model for introduction into South America, Africa, and China where species of the B. dorsalis complex are established.

  17. Program, policy, and price interventions for tobacco control: quantifying the return on investment of a state tobacco control program.

    Science.gov (United States)

    Dilley, Julia A; Harris, Jeffrey R; Boysun, Michael J; Reid, Terry R

    2012-02-01

    We examined health effects associated with 3 tobacco control interventions in Washington State: a comprehensive state program, a state policy banning smoking in public places, and price increases. We used linear regression models to predict changes in smoking prevalence and specific tobacco-related health conditions associated with the interventions. We estimated dollars saved over 10 years (2000-2009) by the value of hospitalizations prevented, discounting for national trends. Smoking declines in the state exceeded declines in the nation. Of the interventions, the state program had the most consistent and largest effect on trends for heart disease, cerebrovascular disease, respiratory disease, and cancer. Over 10 years, implementation of the program was associated with prevention of nearly 36,000 hospitalizations, at a value of about $1.5 billion. The return on investment for the state program was more than $5 to $1. The combined program, policy, and price interventions resulted in reductions in smoking and related health effects, while saving money. Public health and other leaders should continue to invest in tobacco control, including comprehensive programs.

  18. Monitoring control program as a tool for regulatory control

    International Nuclear Information System (INIS)

    Silva Peres, Sueli da; Lauria, Dejanaira C.; Martins, Nadia S.F.; Rio, Monica A.P.

    2008-01-01

    Full text: The Institute of Radiation Protection and Dosimetry (IRD) of the Brazilian Commission of Nuclear Energy (CNEN) is responsible for developing, establishing and carrying out an independent assessment to verify the adequacy, effectiveness and accuracy of environmental radiological control carried out by licensed and controlled facilities. This independent assessment is performed by Environmental Monitoring Control Program (MCP). The MCP is a regulatory control and its main goal is to provide public and environment with an appropriate protection level against harmful effects of ionising radiation. The main purpose of the MCP is to verify whether applicable requirements prescribed by legislation are met, the environmental radiological control of the facilities are adequate and effective and the facilities are able to generate valid measuring results. The MCP is carried out in order to evaluate the quality of environmental radiation monitoring programs (EMP) and the effectiveness of their implementation, sampling conditions in the field, changes of environmental aspects in the impact area, adequacy of and adherence to procedures established and other applicable documents, technical competence of the staff and the necessary resources to ensure the required quality of the EMP. The MCP has been performed by activities should include inspecting and auditing of several types of nuclear and radioactive facilities. The inspection programme include the joint sampling program (CCP). The aim of the CCP is to check data of environmental monitoring of operator. The MCP was implemented in 1994. Ever since several problems related to the environmental control performed by operator was identified. The most important of them include problems related to the preparation and analysis of environmental samples, training of personnel, necessary resources, adherence of procedures to the purpose of the monitoring, fulfillment of procedures established, adequacy of the EMP and EMP

  19. Employers should disband employee weight control programs.

    Science.gov (United States)

    Lewis, Alfred; Khanna, Vikram; Montrose, Shana

    2015-02-01

    American corporations continue to expand wellness programs, which now reach an estimated 90% of workers in large organizations, yet no study has demonstrated that the main focus of these programs-weight control-has any positive effect. There is no published evidence that large-scale corporate attempts to control employee body weight through financial incentives and penalties have generated savings from long-term weight loss, or a reduction in inpatient admissions associated with obesity or even long-term weight loss itself. Other evidence contradicts the hypothesis that population obesity rates meaningfully retard economic growth or manufacturing productivity. Quite the contrary, overscreening and crash dieting can impact employee morale and even harm employee health. Therefore, the authors believe that corporations should disband or significantly reconfigure weight-oriented wellness programs, and that the Affordable Care Act should be amended to require such programs to conform to accepted guidelines for harm avoidance.

  20. Control system design and analysis using the INteractive Controls Analysis (INCA) program

    Science.gov (United States)

    Bauer, Frank H.; Downing, John P.

    1987-01-01

    The INteractive Controls Analysis (INCA) program was developed at the Goddard Space Flight Center to provide a user friendly efficient environment for the design and analysis of linear control systems. Since its inception, INCA has found extensive use in the design, development, and analysis of control systems for spacecraft, instruments, robotics, and pointing systems. Moreover, the results of the analytic tools imbedded in INCA have been flight proven with at least three currently orbiting spacecraft. This paper describes the INCA program and illustrates, using a flight proven example, how the package can perform complex design analyses with relative ease.

  1. Theoretical and algorithmic advances in multi-parametric programming and control

    KAUST Repository

    Pistikopoulos, Efstratios N.; Dominguez, Luis; Panos, Christos; Kouramas, Konstantinos; Chinchuluun, Altannar

    2012-01-01

    This paper presents an overview of recent theoretical and algorithmic advances, and applications in the areas of multi-parametric programming and explicit/multi-parametric model predictive control (mp-MPC). In multi-parametric programming, advances include areas such as nonlinear multi-parametric programming (mp-NLP), bi-level programming, dynamic programming and global optimization for multi-parametric mixed-integer linear programming problems (mp-MILPs). In multi-parametric/explicit MPC (mp-MPC), advances include areas such as robust multi-parametric control, multi-parametric nonlinear MPC (mp-NMPC) and model reduction in mp-MPC. A comprehensive framework for multi-parametric programming and control is also presented. Recent applications include a hydrogen storage device, a fuel cell power generation system, an unmanned autonomous vehicle (UAV) and a hybrid pressure swing adsorption (PSA) system. © 2012 Springer-Verlag.

  2. Theoretical and algorithmic advances in multi-parametric programming and control

    KAUST Repository

    Pistikopoulos, Efstratios N.

    2012-04-21

    This paper presents an overview of recent theoretical and algorithmic advances, and applications in the areas of multi-parametric programming and explicit/multi-parametric model predictive control (mp-MPC). In multi-parametric programming, advances include areas such as nonlinear multi-parametric programming (mp-NLP), bi-level programming, dynamic programming and global optimization for multi-parametric mixed-integer linear programming problems (mp-MILPs). In multi-parametric/explicit MPC (mp-MPC), advances include areas such as robust multi-parametric control, multi-parametric nonlinear MPC (mp-NMPC) and model reduction in mp-MPC. A comprehensive framework for multi-parametric programming and control is also presented. Recent applications include a hydrogen storage device, a fuel cell power generation system, an unmanned autonomous vehicle (UAV) and a hybrid pressure swing adsorption (PSA) system. © 2012 Springer-Verlag.

  3. Intelligent Flight Control Simulation Research Program

    National Research Council Canada - National Science Library

    Stolarik, Brian

    2007-01-01

    ...). Under the program, entitled "Intelligent Flight Control Simulation Research Laboratory," a variety of technologies were investigated or developed during the course of the research for AFRL/VAC...

  4. Object oriented programming interfaces for accelerator control

    International Nuclear Information System (INIS)

    Hoff, L.T.

    1997-01-01

    Several years ago, the AGS controls group was given the task of developing software for the RHIC accelerator. Like the AGS, the RHIC control system needs to control and monitor equipment distributed around a relatively large geographic area. A local area network connects this equipment to a collection of UNIX workstations in a central control room. Similar software had been developed for the AGS about a decade earlier, but isn't well suited for RHIC use for a number of reasons. Rather than adapt the AGS software for RHIC use, the controls group opted to start with a clean slate. To develop software that would address the shortcomings of the AGS software, while preserving the useful features that evolved through years of use. A current trend in control system design is to provide an object oriented programming interface for application developers. This talk will discuss important aspects and features of object oriented application programming interfaces (APIs) for accelerator control systems, and explore why such interfaces are becoming the norm

  5. Salmonella Control Programs in Denmark

    DEFF Research Database (Denmark)

    Wegener, Henrik Caspar; Hald, Tine; Wong, Danilo Lo Fo

    2003-01-01

    We describe Salmonella control programs of broiler chickens, layer hens, and pigs in Denmark. Major reductions in the incidence of foodborne human salmonellosis have occurred by integrated control of farms and food processing plants. Disease control has been achieved by monitoring the herds...... and flocks, eliminating infected animals, and diversifying animals (animals and products are processed differently depending on Salmonella status) and animal food products according to the determined risk. In 2001, the Danish society saved U.S.$25.5 million by controlling Salmonella. The total annual...... Salmonella control costs in year 2001 were U.S.$14.1 million (U.S.$0.075/kg of pork and U.S.$0.02/kg of broiler or egg). These costs are paid almost exclusively by the industry. The control principles described are applicable to most industrialized countries with modern intensive farming systems....

  6. Scheduling and control of programs in the CICADA computer system for TFTR

    International Nuclear Information System (INIS)

    Christianson, G.B.; Sherrick, M.; Stark, W.

    1983-01-01

    The CICADA computer system is a network of super minicomputers for data acquisition, reduction, display and device control on the TFTR experiment. Human interaction with the CICADA system is accomplished by consoles offering color displays with a high degree of operator interaction with the computer system, and by interactive terminals offering a limited degree of operator interaction. The authors describe the software packages and data bases used to control the consoles and provide communication to an application program attached to a console. The console control program in its turn schedules the execution of control programs that furnish operating system interfaces to applications programs executing at a console or terminal (in response to human activation), or upon activation by scheduling tasks. The control programs handle functions such as applications task activation. They discuss the implementation of the control programs in the multi-computer CICADA environment, and describe the control program data bases. In a TFTR shot cycle, applications programs must be scheduled for activation at operator-defined stages, in order to accomplish the arming of hardware devices, acquisition of summary waveform data, and the acquisition and archiving of raw data. The authors describe the software tasks and data bases of the CICADA event system, which accomplishes this scheduling of applications task activation in conjunction with the control programs. Future enhancements planned for the console control, program control, and event systems are outlined

  7. Area-Wide Suppression of the Mediterranean Fruit Fly, Ceratitis capitata, and the Oriental Fruit Fly, Bactrocera dorsalis, in Kamuela, Hawaii

    OpenAIRE

    Vargas, Roger I.; Pi?ero, Jaime C.; Mau, Ronald F. L.; Jang, Eric B.; Klungness, Lester M.; McInnis, Donald O.; Harris, Ernest B.; McQuate, Grant T.; Bautista, Renato C.; Wong, Lyle

    2010-01-01

    The United States Department of Agriculture's Agricultural Research Service initiated an area-wide fruit fly management program in Hawaii in 2000. The first demonstration site was established in Kamuela, Hawaii, USA. This paper documents suppression of the Mediterranean fruit fly, Ceratitis capitata (Wiedemann), and the oriental fruit fly, Bactrocera dorsalis (Hendel) (Diptera: Tephritidae), in a 40 km2 area containing urban, rural and agricultural zones during a 6 year period. The suppressio...

  8. HEALS Hypertension Control Program: Training Church Members as Program Leaders.

    Science.gov (United States)

    Dodani, Sunita; Beayler, Irmatine; Lewis, Jennifer; Sowders, Lindsey A

    2014-01-01

    Health disparities related to cardiovascular diseases (CVDs) including stroke have remained higher in the African-Americans (AAs) than in other populations. HEALS is a faith-based hypertension (HTN) control program modified according to AA community needs, and delivered by the church-lay members called church health advisors (CHAs). This study examined the feasibility and acceptability of training CHAs as HEALS program leaders. Four CHAs completed a 10-hour HEALS program training workshop at the Church, conducted by the nutrition experts. Workshop was evaluated by CHAs on their level of satisfaction, clarity of contents covered and comfort in delivery the program to the church congregation. The overall six main HEALS curriculum components were completed. Workshop was highly evaluated by CHAs on length of training, balance between content and skills development, and level of satisfaction with program delivery. Church-based culturally modified health promotion interventions conducted by the community lay members may be a way to reduce health disparities in ethnic minorities.

  9. Performance expectations of measurement control programs

    International Nuclear Information System (INIS)

    Hammond, G.A.

    1985-01-01

    The principal index for designing and assessing the effectiveness of safeguards is the sensitivity and reliability of gauging the true status of material balances involving material flows, transfers, inventories, and process holdup. The measurement system must not only be capable of characterizing the material for gradation or intensity of protection, but also be responsive to needs for detection and localization of losses, provide confirmation that no diversion has occurred, and help meet requirements for process control, health and safety. Consequently, the judicious application of a measurement control and quality assurance program is vital to a complete understanding of the capabilities and limitations of the measurement system including systematic and random components of error for weight, volume, sampling, chemical, isotopic, and nondestructive determinations of material quantities in each material balance area. This paper describes performance expectations or criteria for a measurement control program in terms of ''what'' is desired and ''why'', relative to safeguards and security objectives

  10. Status of selected air pollution control programs, February 1992

    International Nuclear Information System (INIS)

    1992-02-01

    The collection of status reports has been prepared in order to provide a timely summary of selected EPA air pollution control activities to those individuals who are involved with the implementation of these programs. The report contains ozone/carbon monoxide (CO) programs; mobile sources programs; particulate matter nominally 10M and less (PM-10), sulfur dioxide (SO2) and lead programs; New Source Review (NSR); economics programs; emission standards programs; Indian activity programs; mobile sources programs; air toxics programs; acid rain programs; permits programs; chlorofluorocarbons programs; enforcement programs; and other programs

  11. A Performance Management Initiative for Local Health Department Vector Control Programs.

    Science.gov (United States)

    Gerding, Justin; Kirshy, Micaela; Moran, John W; Bialek, Ron; Lamers, Vanessa; Sarisky, John

    2016-01-01

    Local health department (LHD) vector control programs have experienced reductions in funding and capacity. Acknowledging this situation and its potential effect on the ability to respond to vector-borne diseases, the U.S. Centers for Disease Control and Prevention and the Public Health Foundation partnered on a performance management initiative for LHD vector control programs. The initiative involved 14 programs that conducted a performance assessment using the Environmental Public Health Performance Standards. The programs, assisted by quality improvement (QI) experts, used the assessment results to prioritize improvement areas that were addressed with QI projects intended to increase effectiveness and efficiency in the delivery of services such as responding to mosquito complaints and educating the public about vector-borne disease prevention. This article describes the initiative as a process LHD vector control programs may adapt to meet their performance management needs. This study also reviews aggregate performance assessment results and QI projects, which may reveal common aspects of LHD vector control program performance and priority improvement areas. LHD vector control programs interested in performance assessment and improvement may benefit from engaging in an approach similar to this performance management initiative.

  12. Applied Research of Enterprise Cost Control Based on Linear Programming

    Directory of Open Access Journals (Sweden)

    Yu Shuo

    2015-01-01

    This paper researches the enterprise cost control through the linear programming model, and analyzes the restriction factors of the labor of enterprise production, raw materials, processing equipment, sales price, and other factors affecting the enterprise income, so as to obtain an enterprise cost control model based on the linear programming. This model can calculate rational production mode in the case of limited resources, and acquire optimal enterprise income. The production guiding program and scheduling arrangement of the enterprise can be obtained through calculation results, so as to provide scientific and effective guidance for the enterprise production. This paper adds the sensitivity analysis in the linear programming model, so as to learn about the stability of the enterprise cost control model based on linear programming through the sensitivity analysis, and verify the rationality of the model, and indicate the direction for the enterprise cost control. The calculation results of the model can provide a certain reference for the enterprise planning in the market economy environment, which have strong reference and practical significance in terms of the enterprise cost control.

  13. Effluent controls and environmental monitoring programs for uranium milling operations

    International Nuclear Information System (INIS)

    Maixner, R.D.

    1979-01-01

    Controls will reduce gaseous, particulate, and liquid discharges. Monitoring programs are used to determine effectiveness. The controls and programs discussed are used at Cotter Corporation's Canon City Mill in Colorado. 3 refs

  14. Economics of area-wide sit control programs

    International Nuclear Information System (INIS)

    Enkerlin, Walther

    2003-01-01

    The economic feasibility of using the sterile insect technique (SIT) to control certain key insect pests has been demonstrated clearly. The successful implementation of a number of area-wide and large-scale SIT programs has produced substantial economic benefits for the beneficiaries of the technology. The economic advantages of this technology will become more evident as indirect benefits of SIT application are incorporated into total program benefit estimates. Awareness of the technical and economic advantages of the SIT, and market forces favoring the use of environmentally clean pest control methods, will encourage private investment in this technology. (author)

  15. Control and evaluation programs for TANSY-KM5

    International Nuclear Information System (INIS)

    Grosshoeg, G.; Aronsson, D.; Hoek, M.; Rydz, R.; Norberg, L.; Urholm, L.

    1991-01-01

    Our first task was to purchase a computer and to create a basic software library for the preliminary test of the components. Our choice was a Starburst system from CES. The computer was a PDP-11/70 on a chip. It is the same computer as the ones used by the auxiliary CAMAC crate controllers in the TANSY system. However, the host has a 256 kbyte memory instead of the 64 kbyte memory used in the crate controllers. The operation system is RSX11-M. It is a real time system with properties suitable for laboratory works. However, the computer works in 64 kbyte partitions which limits the size of the programs. Four program systems were written. The two first were one-parameter systems for amplitude and time measurements using the ADCs and TDCs which later should be included in the TANSY system. These systems were supplemented with two two-parameter systems, one for time and amplitude measurements and one for time measurements on 16 detectors simultaneously. The display capabilities of these program systems have been used extensively by the TANSY programs. The programs needed for the manipulation of the system give the user a possibility to manually run the system without any intervention from the normal CODAS control system. The programs have been used for calibration measurements as well as test of the TANSY system. The evaluation programs use the output file from a normal measurement. The data file may be tested for errors. The true events can be sorted into different configurations. The final one is the neutron energy sort program, which gives the neutron energy distribution

  16. A stochastic programming approach to manufacturing flow control

    OpenAIRE

    Haurie, Alain; Moresino, Francesco

    2012-01-01

    This paper proposes and tests an approximation of the solution of a class of piecewise deterministic control problems, typically used in the modeling of manufacturing flow processes. This approximation uses a stochastic programming approach on a suitably discretized and sampled system. The method proceeds through two stages: (i) the Hamilton-Jacobi-Bellman (HJB) dynamic programming equations for the finite horizon continuous time stochastic control problem are discretized over a set of sample...

  17. Tank waste remediation system heat stress control program report, 1995

    International Nuclear Information System (INIS)

    Carls, D.R.

    1995-01-01

    Protecting employees from heat stress within tank farms during the summer months is challenging. Work constraints typically experienced in tank farms complicate the measures taken to protect employees from heat stress. TWRS-Industrial Hygiene (IH) has endeavored to control heat stress injuries by anticipating, recognizing, evaluating and controlling the factors which lead or contribute to heat stress in Tank Farms. The TWRS Heat Stress Control Program covers such areas as: employee and PIC training, communication of daily heat stress alerts to tank farm personnel, setting work/rest regimens, and the use of engineering and personal protective controls when applicable. The program has increased worker awareness of heat stress and prevention, established provisions for worker rest periods, increased drinking water availability to help ensure worker hydration, and allowed for the increased use of other protective controls to combat heat stress. The TWRS Heat Stress Control Program is the cornerstone for controlling heat stress among tank farm employees. The program has made great strides since it's inception during the summer of 1994. Some improvements can still be made to enhance the program for the summer of 1996, such as: (1) procurement and use of personal heat stress monitoring equipment to ensure appropriate application of administrative controls, (2) decrease the need for use of containment tents and anti-contamination clothing, and (3) providing a wider variety of engineering and personal protective controls for heat stress prevention

  18. A method of numerically controlled machine part programming

    Science.gov (United States)

    1970-01-01

    Computer program is designed for automatically programmed tools. Preprocessor computes desired tool path and postprocessor computes actual commands causing machine tool to follow specific path. It is used on a Cincinnati ATC-430 numerically controlled machine tool.

  19. Status of Pantex Plant Waste Management Project/program control system

    International Nuclear Information System (INIS)

    Price, Wesley J.; Matthews, William L.

    1992-01-01

    During a December 1990 Waste Management Program Review held in Albuquerque, New Mexico, the Waste Management and Operational Surety Division (WMOSD) introduced the project control system to be used for the Waste Management (WM) Operations Program. The system was entitled 'TRAC-WM' (Tracking and Control for Waste Management). The stated objective for this system was to establish a frame work for planning, managing, and controlling work within the WM program. As a result Mason and Hanger (the operating contractor at the Pantex Plant) initiated the development of a computerized waste management project tracking system. (author)

  20. Nuclear materials control and accountability internal audit program

    International Nuclear Information System (INIS)

    Barham, M.A.; Abbott, R.R.

    1991-01-01

    This paper reports that the Department of Energy Order (DOE) 5633.3, Control and Accountability for Nuclear Materials, includes several requirements for development and implementation of an internal audit program. Martin Marietta Energy System, Inc., manages five sites in Tennessee, Kentucky, and Ohio for the DOE Field Office, Oak Ridge and has a Central Nuclear Materials Control and Accountability (NMC and A) Manager with matrixed responsibility for the NMC and A program at the five sites. The Energy Systems Central NMC and A Manager has developed an NMC and A Internal Audit Handbook which defines the functional responsibilities, performance criteria, and reporting and documentation requirements for the Energy Systems NMC and A Internal Audit Program. The initial work to develop and implement these standards was tested at the K-25 Site when the site hired an internal auditor to meet the DOE requirements for an NMC and A Internal Audit program

  1. Adaptive Dynamic Programming for Control Algorithms and Stability

    CERN Document Server

    Zhang, Huaguang; Luo, Yanhong; Wang, Ding

    2013-01-01

    There are many methods of stable controller design for nonlinear systems. In seeking to go beyond the minimum requirement of stability, Adaptive Dynamic Programming for Control approaches the challenging topic of optimal control for nonlinear systems using the tools of  adaptive dynamic programming (ADP). The range of systems treated is extensive; affine, switched, singularly perturbed and time-delay nonlinear systems are discussed as are the uses of neural networks and techniques of value and policy iteration. The text features three main aspects of ADP in which the methods proposed for stabilization and for tracking and games benefit from the incorporation of optimal control methods: • infinite-horizon control for which the difficulty of solving partial differential Hamilton–Jacobi–Bellman equations directly is overcome, and  proof provided that the iterative value function updating sequence converges to the infimum of all the value functions obtained by admissible control law sequences; • finite-...

  2. On a program manifold's stability of one contour automatic control systems

    Science.gov (United States)

    Zumatov, S. S.

    2017-12-01

    Methodology of analysis of stability is expounded to the one contour systems automatic control feedback in the presence of non-linearities. The methodology is based on the use of the simplest mathematical models of the nonlinear controllable systems. Stability of program manifolds of one contour automatic control systems is investigated. The sufficient conditions of program manifold's absolute stability of one contour automatic control systems are obtained. The Hurwitz's angle of absolute stability was determined. The sufficient conditions of program manifold's absolute stability of control systems by the course of plane in the mode of autopilot are obtained by means Lyapunov's second method.

  3. Application oriented programming and control of industrial robots

    International Nuclear Information System (INIS)

    Nilsson, Klas.

    1992-07-01

    Efficient use of industrial robots requires a strong interplay between user level commands, the motion control system, and external equipment. It should also be possible for an experienced application engineer to tailor the motion control to a specific application in a convenient way, instead of deficient utilization of the device or tricky user programming which is often the case today. A layered software architecture has been designed based on an application oriented view, considering typical hardware and software constraints. The top layers or the architecture support improved integration of off-line programming with interactive teach-in programming. The proposed solution is based on a transformation of robot programs between an on-line and an off-line representation. A central part of the architecture is an intermediate software layer, allowing the experienced user to introduce application specific motion primitives, on top of the motion control system. Flexibility during system configuration combined with computing efficiency and performance at run-time is of major importance. The solution is based on so called actions, which are methods to be passed between different software layers. Such methods can be specification of nonlinear control parameters, application specific control strategies, or treatment of external sensor signals. The actions can be implemented efficiently even in the multiprocessor case by using relocatable executable pieces of code generated from a special cross-compilation strategy. The lowest layers, comprising the motion control, have to be efficient and still fit in with the upper layers. In these layers, software solutions include an external sensor interface and a concept of motion pipelining allowing sensor based motions to be partly computed in advance. An experimental platform, built around commercially available robots, has been developed to verify the proposed solutions. (au)

  4. The value of partnerships in state obesity prevention and control programs.

    Science.gov (United States)

    Hersey, James; Kelly, Bridget; Roussel, Amy; Curtis, LaShawn; Horne, Joseph; Williams-Piehota, Pamela; Kuester, Sarah; Farris, Rosanne

    2012-03-01

    State health departments funded by the Centers for Disease Control and Prevention's Nutrition, Physical Activity, and Obesity Program collaborate with multiple partners to develop and implement comprehensive obesity prevention and control programs. A mixed-methods evaluation of 28 state programs over a 5-year period assessed states' progress on program requirements, including developing statewide partnerships and coordinating with partners to support obesity prevention and control efforts. States with greater partnership involvement leveraged more funding support for their programs, passed more obesity-related policies, and were more likely to implement obesity interventions in multiple settings. Case studies provided guidance for establishing and maintaining strong partnerships. Findings from this study offer emerging evidence to support assumptions about the centrality of partnerships to states' success in obesity program development and implementation and related health promotion activities.

  5. A user's guide to the Flexible Spacecraft Dynamics and Control Program

    Science.gov (United States)

    Fedor, J. V.

    1984-01-01

    A guide to the use of the Flexible Spacecraft Dynamics Program (FSD) is presented covering input requirements, control words, orbit generation, spacecraft description and simulation options, and output definition. The program can be used in dynamics and control analysis as well as in orbit support of deployment and control of spacecraft. The program is applicable to inertially oriented spinning, Earth oriented or gravity gradient stabilized spacecraft. Internal and external environmental effects can be simulated.

  6. Knowledge based system for control rod programming of BWRs

    International Nuclear Information System (INIS)

    Fukuzaki, Takaharu; Yoshida, Ken-ichi; Kobayashi, Yasuhiro

    1988-01-01

    A knowledge based system has been developed to support designers in control rod programming of BWRs. The programming searches through optimal control rod patterns to realize safe and effective burning of nuclear fuel. Knowledge of experienced designers plays the main role in minimizing the number of calculations by the core performance evaluation code. This code predicts power distibution and thermal margins of the nuclear fuel. This knowledge is transformed into 'if-then' type rules and subroutines, and is stored in a knowledge base of the knowledge based system. The system consists of working area, an inference engine and the knowledge base. The inference engine can detect those data which have to be regenerated, call those subroutine which control the user's interface and numerical computations, and store competitive sets of data in different parts of the working area. Using this system, control rod programming of a BWR plant was traced with about 500 rules and 150 subroutines. Both the generation of control rod patterns for the first calculation of the code and the modification of a control rod pattern to reflect the calculation were completed more effectively than in a conventional method. (author)

  7. The first decade of the Massachusetts Tobacco Control Program.

    Science.gov (United States)

    Koh, Howard K; Judge, Christine M; Robbins, Harriet; Celebucki, Carolyn Cobb; Walker, Deborah K; Connolly, Gregory N

    2005-01-01

    This article provides a comprehensive overview of the first decade of the Massachusetts Tobacco Control Program (MTCP). Born after Massachusetts passed a 1992 ballot initiative raising cigarette excise taxes to fund the program, MTCP greatly reduced statewide cigarette consumption before being reduced to a skeletal state by funding cuts. The article describes the program's components and goals, details outcomes, presents a summary of policy accomplishments, and reviews the present status of MTCP in the current climate of national and state fiscal crises. The first decade of the MTCP offers many lessons learned for the future of tobacco control.

  8. Computer program for automatic generation of BWR control rod patterns

    International Nuclear Information System (INIS)

    Taner, M.S.; Levine, S.H.; Hsia, M.Y.

    1990-01-01

    A computer program named OCTOPUS has been developed to automatically determine a control rod pattern that approximates some desired target power distribution as closely as possible without violating any thermal safety or reactor criticality constraints. The program OCTOPUS performs a semi-optimization task based on the method of approximation programming (MAP) to develop control rod patterns. The SIMULATE-E code is used to determine the nucleonic characteristics of the reactor core state

  9. An improved instrument setpoint control program

    International Nuclear Information System (INIS)

    Cash, J.S. Jr.; George, R.T.; Kincaid, S.C.

    1991-01-01

    Instrument setpoints have a definite and often significant impact on plant safety, reliability, and availability. Although typically overshadowed by plant design, modification, and physical change activities, instrument setpoints can alter plant status and system operating characteristics just as significantly. Recognizing the need for a formal program that provides configuration control of instrument setpoints, provides a readily accessible and clearly documented basis for instrument setpoints, and integrates and coordinates operations, engineering, and maintenance activities that influence the basis for instrument setpoints, Philadelphia Electric Company (PECo) is developing an Improved Instrument Setpoint Control Program (IISCP) that incorporates current industry guidance and practices and state-of-the-art information systems technology. The IISCP was designed around PECo's then existing business processes for setpoint control, determination, and maintenance. A task force representing the various constituencies from both plants and the engineering and services organizations were formed to identify objectives and design features for the IISCP. Utilizing industry standards and guidance, regulatory documents, the experiences and good practices obtained from other utilities, and PECo's nuclear group strategies, objectives, and goals, specific objectives were identified to enhance the business processes

  10. Scalable control program for multiprecursor flow-type atomic layer deposition system

    Energy Technology Data Exchange (ETDEWEB)

    Selvaraj, Sathees Kannan [Department of Chemical Engineering, University of Illinois at Chicago, Chicago, Illinois 60607 (United States); Takoudis, Christos G., E-mail: takoudis@uic.edu [Department of Chemical Engineering, University of Illinois at Chicago, Chicago, Illinois 60607 and Department of Bioengineering, University of Illinois at Chicago, Chicago, Illinois 60607 (United States)

    2015-01-01

    The authors report the development and implementation of a scalable control program to control flow type atomic layer deposition (ALD) reactor with multiple precursor delivery lines. The program logic is written and tested in LABVIEW environment to control ALD reactor with four precursor delivery lines to deposit up to four layers of different materials in cyclic manner. The programming logic is conceived such that to facilitate scale up for depositing more layers with multiple precursors and scale down for using single layer with any one precursor in the ALD reactor. The program takes precursor and oxidizer exposure and purging times as input and controls the sequential opening and closing of the valves to facilitate the complex ALD process in cyclic manner. The program could be used to deposit materials from any single line or in tandem with other lines in any combination and in any sequence.

  11. Model-based control strategies for systems with constraints of the program type

    Science.gov (United States)

    Jarzębowska, Elżbieta

    2006-08-01

    The paper presents a model-based tracking control strategy for constrained mechanical systems. Constraints we consider can be material and non-material ones referred to as program constraints. The program constraint equations represent tasks put upon system motions and they can be differential equations of orders higher than one or two, and be non-integrable. The tracking control strategy relies upon two dynamic models: a reference model, which is a dynamic model of a system with arbitrary order differential constraints and a dynamic control model. The reference model serves as a motion planner, which generates inputs to the dynamic control model. It is based upon a generalized program motion equations (GPME) method. The method enables to combine material and program constraints and merge them both into the motion equations. Lagrange's equations with multipliers are the peculiar case of the GPME, since they can be applied to systems with constraints of first orders. Our tracking strategy referred to as a model reference program motion tracking control strategy enables tracking of any program motion predefined by the program constraints. It extends the "trajectory tracking" to the "program motion tracking". We also demonstrate that our tracking strategy can be extended to a hybrid program motion/force tracking.

  12. PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid N

    International Nuclear Information System (INIS)

    KOCH, M.R.

    2000-01-01

    This document describe the software programs for the Programmable Logic Controller and the Datable Access Module for Pumping Instrumentation and Control skid ''N''. The Appendices contains copies of the printouts of these software programs. This document describes the software programs for the Allen-Bradley SLC 500 programmable logic controller (PLC) and the Allen-Bradley DTAM PLUS operator interface module used on Pumping Instrumentation and Control (PIC) skid ''N''. The software programs for the SLC 500 and DTAM Plus are based on the core programs provided by Allen-Bradley. The PLC and DTAM software programs on skid ''D'' for SX-104 are the baseline programs. These baselines have been tailored for U-farm skids. The skid ''N'' program for U-109 is similar to the skid ''M'' program for U-102. An Acceptance Test Procedure (ATP) and an Operational Test Procedure (OTP) verify that the software programs meet the specific requirements for U-109 pumping. This document represents the final PLC and DTAM programs for PIC skid ''N'' at U-109. These programs were printed out after the performance of the OTP. The OTP acts as the final qualification test for the software programs. Functional requirements and details of the PLC ladder logic are described in this document. The final programs entered into the PLC and DTAM Plus are included as Appendices to this document

  13. Systematic control of large computer programs

    International Nuclear Information System (INIS)

    Goedbloed, J.P.; Klieb, L.

    1986-07-01

    A package of CCL, UPDATE, and FORTRAN procedures is described which facilitates the systematic control and development of large scientific computer programs. The package provides a general tool box for this purpose which contains many conveniences for the systematic administration of files, editing, reformating of line printer output files, etc. In addition, a small number of procedures is devoted to the problem of structured development of a large computer program which is used by a group of scientists. The essence of the method is contained in three procedures N, R, and X for the creation of a new UPDATE program library, its revision, and execution, resp., and a procedure REVISE which provides a joint editor - UPDATE session which combines the advantages of the two systems, viz. speed and rigor. (Auth.)

  14. Steam generator deposit control program assessment at Comanche Peak

    International Nuclear Information System (INIS)

    Stevens, J.; Fellers, B.; Orbon, S.

    2002-01-01

    Comanche Peak has employed a variety of methods to assess the effectiveness of the deposit control program. These include typical methods such as an extensive visual inspection program and detailed corrosion product analysis and trending. In addition, a recently pioneered technique, low frequency eddy current profile analysis (LFEC) has been utilized. LFEC provides a visual mapping of the magnetite deposit profile of the steam generator. Analysis of the LFEC results not only provides general area deposition rates, but can also provide local deposition patterns, which is indicative of steam generator performance. Other techniques utilized include trending of steam pressure, steam generator hideout-return, and flow assisted corrosion (FAC) results. The sum of this information provides a comprehensive assessment of the deposit control program effectiveness and the condition of the steam generator. It also provides important diagnostic and predictive information relative to steam generator life management and mitigative strategies, such as special cleaning procedures. This paper discusses the techniques employed by Comanche Peak Chemistry to monitor the effectiveness of the deposit control program and describes how this information is used in strategic planning. (authors)

  15. Expert system for control rod programming of boiling water reactors

    International Nuclear Information System (INIS)

    Fukuzaki, T.; Yoshida, K.; Kobayashi, Y.; Matsuura, H.; Hoshi, K.

    1986-01-01

    Control rod programming, one of the main tasks in reactor core management of boiling water reactors (BWRs), can be successfully accomplished by well-experienced engineers. By use of core performance evaluation codes, their knowledge plays the main role in searching through optimal control rod patterns and exposure points for adjusting notch positions and exchanging rod patterns. An expert system has been developed, based on a method of knowledge engineering, to lighten the engineer's load in control rod programming. This system utilizes an inference engine suited for planning/designing problems, and stores the knowledge of well-experienced engineers in its knowledge base. In this report, the inference engine, developed considering the characteristics of the control rod programming, is introduced. Then the constitution and function of the expert system are discussed

  16. Food and Nutrition Services Quality Control Management Program.

    Science.gov (United States)

    Wimsatt-Fraim, Teresa S.

    A program was conducted to improve the quality of food service through the training of 44 food and nutrition service employees in a 200-bed hospital. A 12-week quality control program was implemented to address four key areas: food temperatures, food accuracy, food quality, and dietary personnel. Learning strategies, emphasizing critical thinking…

  17. PLC/DTAM Software Programs for Pumping Instrumentation and Control Skid ''L''

    International Nuclear Information System (INIS)

    KOCH, M.R.

    2000-01-01

    This document describes the software programs for the Programmable Logic Controller and the Data Table Access Module for Pumping Instrumentation and Control skid ''L''. The Appendices contains copies of the printouts of these software programs

  18. Dedicated Programming Language for Small Distributed Control Divices

    DEFF Research Database (Denmark)

    Madsen, Per Printz; Borch, Ole

    2007-01-01

    . This paper describes a new, flexible and simple language for programming distributed control tasks. The compiler for this language generates a target code that is very easy to interpret. A interpreter, that can be easy ported to different hardwares, is described. The new language is simple and easy to learn...... become a reality if each of these controlling computers can be configured to perform a cooperative task. This again requires the necessary communicating facilities. In other words this requires that all these simple and distributed computers can be programmed in a simple and hardware independent way...

  19. The sheep blowfly genetic control program in Australia

    International Nuclear Information System (INIS)

    Foster, Geoffrey G.

    1989-01-01

    The blowfly Lucilia cuprina is the most important myiasis pet of sheep in Australia. Other species are associated with sheep myiasis, but L. cuprina is probably responsible for initiating more than 90% of infestations. Annual costs of production losses, prevention and treatment have been estimated at $149 millions in 1985. Prevention and treatment encompass both insecticidal applications to sheep and non-chemical management practices. In the absence of effective preventive measures, the sheep industry would be non-viable over much of Australia. Insecticide usage against L. cuprina has been marked by the appearance of widespread resistance to cyclodienes in 1956, the organophosphates in 1965, and carbamates in 1966. Resistance has not yet been reported against the triazine compounds introduced for blowfly control in 1981. The most effective non-chemical control measures are surgical (removal of skin from the breech in certain breeds of sheep, and tail-docking). They protect sheep by reducing favourable oviposition sites (dung and urine-stained wool). The spectre of insecticide resistance and the early success of the sterile insect technique (SIT) against screwworm fly in the U.S.A., led this Division to consider SIT and other autocidal methods in the 1960s. The L. cuprina genetics research program was established in 1966 and subsequently expanded in 1971. More recently, lobbying by animal welfare groups against surgical blowfly control practices, as well as increasing consumer awareness of insecticide residues in animal products, have accelerated the search for alternatives to chemical control. When SIT was first considered for L. cuprina control in 1960, little was known about the population dynamics of L. cuprina. There were insufficient ecological data to evaluate the prospects of alternative strategies such as suppression or containment. The number of flies which would have to be released in a SIT program was unknown, as were the costs. Assuming that the cost of

  20. CDC Best Practices for Comprehensive Tobacco Control Programs - 2007

    Data.gov (United States)

    U.S. Department of Health & Human Services — Centers for Disease Control and Prevention (CDC). Best Practices for Comprehensive Tobacco Control Programs. Funding. CDC's Best Practices for Comprehensive Tobacco...

  1. CDC Best Practices for Comprehensive Tobacco Control Programs - 2014

    Data.gov (United States)

    U.S. Department of Health & Human Services — Centers for Disease Control and Prevention (CDC). Best Practices for Comprehensive Tobacco Control Programs. Funding. CDC's Best Practices for Comprehensive Tobacco...

  2. PLC/DTAM Software Programs for Pumping Instrumentation and Control Skid L

    Energy Technology Data Exchange (ETDEWEB)

    KOCH, M.R.

    2000-01-03

    This document describes the software programs for the Programmable Logic Controller and the Data Table Access Module for Pumping Instrumentation and Control skid ''L''. The Appendices contains copies of the printouts of these software programs.

  3. OVERVIEW OF ADVANCED PETROLEUM-BASED FUELS-DIESEL EMISSIONS CONTROL PROGRAM (APBF-DEC)

    Energy Technology Data Exchange (ETDEWEB)

    Sverdrup, George M.

    2000-08-20

    The Advanced Petroleum-Based Fuels-Diesel Emissions Control Program (APBF-DEC) began in February 2000 and is supported by government agencies and industry. The purpose of the APBF-DEC program is to identify and evaluate the optimal combinations of fuels, lubricants, diesel engines, and emission control systems to meet the projected emission standards for the 2000 to 2010 time period. APBF-DEC is an outgrowth of the earlier Diesel Emission Control-Sulfur Effects Program (DECSE), whose objective is to determine the impact of the sulfur levels in fuel on emission control systems that could lower the emissions of NOx and particulate matter (PM) from diesel powered vehicles in the 2002 to 2004 period. Results from the DECSE studies of two emission control technologies-diesel particle filter (DPF) and NOx adsorber-will be used in the APBF-DEC program. These data are expected to provide initial information on emission control technology options and the effects of fuel properties (including additives) on the performance of emission control systems.

  4. Implementation contexts of a Tuberculosis Control Program in Brazilian prisons

    Directory of Open Access Journals (Sweden)

    Luisa Gonçalves Dutra de Oliveira

    2015-01-01

    Full Text Available OBJECTIVE To analyze the influence from context characteristics in the control of tuberculosis in prisons, and the influence from the program implementation degrees in observed effects.METHODS A multiple case study, with a qualitative approach, conducted in the prison systems of two Brazilian states in 2011 and 2012. Two prisons were analyzed in each state, and a prison hospital was analyzed in one of them. The data were submitted to a content analysis, which was based on external, political-organizational, implementation, and effect dimensions. Contextual factors and the ones in the program organization were correlated. The independent variable was the program implementation degree and the dependent one, the effects from the Tuberculosis Control Program in prisons.RESULTS The context with the highest sociodemographic vulnerability, the highest incidence rate of tuberculosis, and the smallest amount of available resources were associated with the low implementation degree of the program. The results from tuberculosis treatment in the prison system were better where the program had already been partially implemented than in the case with low implementation degree in both cases.CONCLUSIONS The implementation degree and its contexts – external and political-organizational dimensions – simultaneously contribute to the effects that are observed in the control of tuberculosis in analyzed prisons.

  5. Traffic Control Device Evaluation Program : FY 2017

    Science.gov (United States)

    2018-03-01

    This report presents findings on the activities conducted in the Traffic Control Device Evaluation Program during the 2017 fiscal year. The research on sponsored changeable message signs (continued from the previous year) was terminated by the Federa...

  6. Development of in-plant real-time materials control: the DYMAC program

    International Nuclear Information System (INIS)

    Augustson, R.H.

    1976-01-01

    LASL is in the process of developing a dynamic materials control program, called DYMAC, to provide the technology for stringent real-time nuclear materials control. The DYMAC program combines hardware and software into four component subsystems: nondestructive assay (NDA), instrumentation, data acquisition, data base management, and real-time accountability. To demonstrate the feasibility of DYMAC, a working real-time materials control system will be installed at the new plutonium facility presently under construction at LASL. Program emphasis is on developing practical solutions to generic problems and communicating those solutions to other installations for use throughout the nuclear fuel cycle

  7. On a program manifold’s stability of one contour automatic control systems

    Directory of Open Access Journals (Sweden)

    Zumatov S. S.

    2017-12-01

    Full Text Available Methodology of analysis of stability is expounded to the one contour systems automatic control feedback in the presence of non-linearities. The methodology is based on the use of the simplest mathematical models of the nonlinear controllable systems. Stability of program manifolds of one contour automatic control systems is investigated. The sufficient conditions of program manifold’s absolute stability of one contour automatic control systems are obtained. The Hurwitz’s angle of absolute stability was determined. The sufficient conditions of program manifold’s absolute stability of control systems by the course of plane in the mode of autopilot are obtained by means Lyapunov’s second method.

  8. Robust Control Design via Linear Programming

    Science.gov (United States)

    Keel, L. H.; Bhattacharyya, S. P.

    1998-01-01

    This paper deals with the problem of synthesizing or designing a feedback controller of fixed dynamic order. The closed loop specifications considered here are given in terms of a target performance vector representing a desired set of closed loop transfer functions connecting various signals. In general these point targets are unattainable with a fixed order controller. By enlarging the target from a fixed point set to an interval set the solvability conditions with a fixed order controller are relaxed and a solution is more easily enabled. Results from the parametric robust control literature can be used to design the interval target family so that the performance deterioration is acceptable, even when plant uncertainty is present. It is shown that it is possible to devise a computationally simple linear programming approach that attempts to meet the desired closed loop specifications.

  9. 7 CFR 58.149 - Alternate quality control programs for dairy products.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Alternate quality control programs for dairy products... for dairy products. (a) When a plant has in operation an acceptable quality control program which is... (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS...

  10. Programs for control of an analog-signal switching network

    International Nuclear Information System (INIS)

    D'Ottavio, T.; Enriquez, R.; Katz, R.; Skelly, J.

    1989-01-01

    A suite of programs has been developed to control the network of analog-signal switching multiplexers in the AGS complex. The software is driven by a relational database which describes the architecture of the multiplexer tree and the set of available analog signals. Signals are routed through a three-layer multiplexer tree, to be made available at four consoles each with three 4-trace oscilloscopes. A menu-structured operator interface program is available at each console, to accept requests to route any available analog signal to any of that console's 12 oscilloscope traces. A common routing-server program provides automatic routing-server program provides automatic routing of requested signals through the layers of multiplexers, maintaining a reservation database to denote free and in-use trunks. Expansion of the analog signal system is easily accommodated in software by adding new signals, trunks, multiplexers, or consoles to the database. Programmatic control of the triggering signals for each of the oscilloscopes is also provided. 3 refs., 4 figs., 3 tabs

  11. Coordination Between the HEU Transparency Program and the Material Protection, Control and Accountability Program

    International Nuclear Information System (INIS)

    Glaser, J.; Hernandez, J.; Dougherty, D.; Bieniawski, A.; Cahalane, P.; Mastal, E.

    2000-01-01

    DOE sponsored programs such as Material Protection Control and Accountability (MPC and A) and implementation of the Highly-Enriched Uranium (HEU) Transparency Program send US personnel into Russian nuclear facilities and receive Russian representatives from these programs. While there is overlap in the Russian nuclear facilities visited by these two programs, there had not been any formal mechanism to share information between them. Recently, an MPC and A/HEU Working Group was developed to facilitate the sharing of appropriate information and to address concerns expressed by Minatom and Russian facility personnel such as US visit scheduling conflicts. This paper discusses the goals of the Working Group and ways it has helped to allow the programs to work more efficiently with the Russian facilities

  12. Quality-control activities of the Hanford Environmental Surveillance Program

    International Nuclear Information System (INIS)

    Price, K.R.; Jaquish, R.E.

    1982-01-01

    A comprehensive approach to quality control (QC) has been developed by the Pacific Northwest Laboratory for the Hanford Environmental Surveillance Program. The framework of quality control for the surveillance program has been documented in a QC implementation guide wherein QC requirements are specified and specific responsibilities and authorities are described. Subjects in the guide include the collection, analysis, and reporting of samples as well as equipment calibration and maintenance, training, audits, and record keeping. A QC file and library have been established to store pertinent documentation, records, and references for ready access

  13. PLC/DTAM Software Programs for Pumping Instrumentation and Control Skid X

    International Nuclear Information System (INIS)

    HORNER, T.M.

    2001-01-01

    This document describes the software programs for the Allen-Bradley SLC 500 programmable logic controller (PLC) and the Allen-Bradley DTAM PLUS operator interface module used on Pumping Instrumentation and Control (PIC) skid ''X''. The software programs for the SLC 500 and DTAM Plus are based on the core programs provided by Allen-Bradley. The PLC and DTAM software programs on skid ''D'' for SX-104 are the baseline programs. These baselines will be tailored for each individual BY-farm skid. An Acceptance Test Procedure (ATP) and an Operational Test Procedure (OTP) verify that the software programs meet the specific requirements for BY-105 pumping. This document represents the final PLC and DTAM programs for PIC skid ''X'' at BY-105. These programs were printed out after the performance of the OTP. The OTP acts as the final qualification test for the software programs. Functional requirements and details of the PLC ladder logic are described in this document. The final programs entered into the PLC and DTAM Plus are included as Appendices to this document

  14. PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid P

    International Nuclear Information System (INIS)

    KOCH, M.R.

    2000-01-01

    This document describe the software programs for the Programmable Logic Controller and the Datable Access Module for Pumping Instrumentation and Control skid ''P''. The Appendices contains copies of the printouts of these software programs

  15. [Analysis of the results of the SEIMC External Quality Control Program, 2007].

    Science.gov (United States)

    Guna Serrano, María del Remedio; Orta Mira, Nieves; Ovies, María; Gimeno Cardona, Concepción; Pérez, José L

    2008-11-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) includes controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. This article presents the most important conclusions and lessons drawn from the 2007 controls. As a whole, the results obtained in 2007 confirm the excellent skill and good technical standards found in previous years. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. A few deviations were observed in some controls, calling for critical reflection. Once again, the results of this program highlighted the need to complement internal with external controls, such as those offered by the SEIMC program.

  16. Water quality control program in experimental circuits

    International Nuclear Information System (INIS)

    Cegalla, Miriam A.

    1996-01-01

    The Water Quality Control Program of the Experimental Circuits visualizes studying the water chemistry of the cooling in the primary and secondary circuits, monitoring the corrosion of the systems and studying the mechanism of the corrosion products transport in the systems. (author)

  17. Neurolinguistic programming training, trait anxiety, and locus of control.

    Science.gov (United States)

    Konefal, J; Duncan, R C; Reese, M A

    1992-06-01

    Training in the neurolinguistic programming techniques of shifting perceptual position, visual-kinesthetic dissociation, timelines, and change-history, all based on experiential cognitive processing of remembered events, leads to an increased awareness of behavioral contingencies and a more sensitive recognition of environmental cues which could serve to lower trait anxiety and increase the sense of internal control. This study reports on within-person and between-group changes in trait anxiety and locus of control as measured on the Spielberger State-Trait Anxiety Inventory and Wallston, Wallston, and DeVallis' Multiple Health Locus of Control immediately following a 21-day residential training in neurolinguistic programming. Significant with-in-person decreases in trait-anxiety scores and increases in internal locus of control scores were observed as predicted. Chance and powerful other locus of control scores were unchanged. Significant differences were noted on trait anxiety and locus of control scores between European and U.S. participants, although change scores were similar for the two groups. These findings are consistent with the hypothesis that this training may lower trait-anxiety scores and increase internal locus of control scores. A matched control group was not available, and follow-up was unfortunately not possible.

  18. PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid ''M''

    International Nuclear Information System (INIS)

    KOCH, M.R.

    2000-01-01

    This document describes the software programs for the Programmable Logic Controller and the Data Table Access Module for Pumping Instrumentation and Control skid ''M''. The Appendices contains copies of the printouts of these software programs

  19. Establishment of seed quality control programs Implantação de programas de controle de qualidade de sementes

    Directory of Open Access Journals (Sweden)

    S. M. Cicero

    1998-01-01

    Full Text Available An efficient quality control program should lead to the production of high quality seeds. Consequently, a series of technical and administrative procedures must be adopted in a way that does not compromise this objective. Considering that, in applied terms, external control becomes less important as internal control programs advance technologically, this work emphasizes the principle factors that should be considered in the implantation of a seed quality control program, such as: work groups, physical structure and procedures to initiate the program.Um programa de controle de qualidade deve proporcionar a produção de sementes de alta qualidade. Para que tal objetivo seja alcançado com sucesso, e necessário a adoção de uma serie de procedimentos técnicos e administrativos, sem os quais haverá comprometimento das metas a serem atingidas. Levando-se em conta que, em termos aplicados, o controle externo perde importância na medida que avançam tecnologicamente os programas de controle interno, o presente trabalho aborda os principais fatores que devem ser considerados na implantação de um programa de controle de qualidade de sementes, tais como: equipe de trabalho, estrutura física e procedimentos para iniciar o programa.

  20. The first decade of the Massachusetts Tobacco Control Program.

    OpenAIRE

    Koh, Howard K.; Judge, Christine M.; Robbins, Harriet; Celebucki, Carolyn Cobb; Walker, Deborah K.; Connolly, Gregory N.

    2005-01-01

    This article provides a comprehensive overview of the first decade of the Massachusetts Tobacco Control Program (MTCP). Born after Massachusetts passed a 1992 ballot initiative raising cigarette excise taxes to fund the program, MTCP greatly reduced statewide cigarette consumption before being reduced to a skeletal state by funding cuts. The article describes the program's components and goals, details outcomes, presents a summary of policy accomplishments, and reviews the present status of M...

  1. Modifications to the control program HASP

    International Nuclear Information System (INIS)

    Bartoli, M.; Dall'Olio, L.; Mareso, T.; Ricci, F.

    1973-01-01

    Modification to HASP version 3, level 0, a control program for an electronic computer, was described with the purpose of solving some operative and managing problems not solved by the standard version for the IBM 360/75 computer. The application and utilization of these facilities require a deep knowledge of the HASP II design, version 3, level 0, 360D-05.1.014

  2. Programming a real-time operating system for satellite control applications Satellite Control Applications

    International Nuclear Information System (INIS)

    Omer, M.; Anjum, O.; Suddle, M.R.

    2004-01-01

    With the realization of ideas like formation flights and multi-body space vehicles the demands on an attitude control system have become increasingly complex. Even in its most simplified form, the control system for a typical geostationary satellite has to run various supervisory functions along with determination and control algorithms side by side. Within each algorithm it has to employ multiple actuation and sensing mechanisms and service real time interrupts, for example, in the case of actuator saturation and sensor data fusion. This entails the idea of thread scheduling and program synchronization, tasks specifically meant for a real time OS. This paper explores the embedding of attitude determination and control loop within the framework of a real time operating system provided for TI's DSP C6xxx series. The paper details out the much functionality provided within the scaleable real time kernel and the analysis and configuration tools available, It goes on to describe a layered implementation stack associated with a typical control for Geo Stationary satellites. An application for control is then presented in which state of the art analysis tools are employed to view program threads, synchronization semaphores, hardware interrupts and data exchange pipes operating in real time. (author)

  3. Validation of FORTRAN emulators for the G2 varian control programs

    International Nuclear Information System (INIS)

    Delorme, G.

    1996-01-01

    The extensive use of the Gentilly full scope simulator for training and verification of plant procedures, forced the development of a reliable desktop simulator for software maintenance purposes. For that we needed emulators for the control programs which run on the DCC Varian computers in the full scope simulator. This paper presents the validation results for the Reactor Regulating System (RRS) program. This emulator was programmed in a modular fashion providing ease of maintenance and of transportation to another environment. The results obtained with specific tests or with integrated testing involving complex control rule interactions, compared favorably with the ones obtained using the actual plant control programs running on the full scope simulator, which constitutes an irrefutable validation procedure. This RRS package along with the other emulators being validated In this manner could be used in safety codes with confidence. (author)

  4. Validation of a proposal for evaluating hospital infection control programs.

    Science.gov (United States)

    Silva, Cristiane Pavanello Rodrigues; Lacerda, Rúbia Aparecida

    2011-02-01

    To validate the construct and discriminant properties of a hospital infection prevention and control program. The program consisted of four indicators: technical-operational structure; operational prevention and control guidelines; epidemiological surveillance system; and prevention and control activities. These indicators, with previously validated content, were applied to 50 healthcare institutions in the city of São Paulo, Southeastern Brazil, in 2009. Descriptive statistics were used to characterize the hospitals and indicator scores, and Cronbach's α coefficient was used to evaluate the internal consistency. The discriminant validity was analyzed by comparing indicator scores between groups of hospitals: with versus without quality certification. The construct validity analysis was based on exploratory factor analysis with a tetrachoric correlation matrix. The indicators for the technical-operational structure and epidemiological surveillance presented almost 100% conformity in the whole sample. The indicators for the operational prevention and control guidelines and the prevention and control activities presented internal consistency ranging from 0.67 to 0.80. The discriminant validity of these indicators indicated higher and statistically significant mean conformity scores among the group of institutions with healthcare certification or accreditation processes. In the construct validation, two dimensions were identified for the operational prevention and control guidelines: recommendations for preventing hospital infection and recommendations for standardizing prophylaxis procedures, with good correlation between the analysis units that formed the guidelines. The same was found for the prevention and control activities: interfaces with treatment units and support units were identified. Validation of the measurement properties of the hospital infection prevention and control program indicators made it possible to develop a tool for evaluating these programs

  5. SEMTAP (Serpentine End Match TApe program): The Easy Way to Program Your Numerically Controlled Router for the Production of SEM Joints

    Science.gov (United States)

    Ronald E. Coleman

    1977-01-01

    SEMTAP (Serpentine End Match TApe Program) is an easy and inexpensive method of programing a numerically controlled router for the manufacture of SEM (Serpentine End Matching) joints. The SEMTAP computer program allows the user to issue commands that will accurately direct a numerically controlled router along any SEM path. The user need not be a computer programer to...

  6. A mathematical method for boiling water reactor control rod programming

    International Nuclear Information System (INIS)

    Tokumasu, S.; Hiranuma, H.; Ozawa, M.; Yokomi, M.

    1985-01-01

    A new mathematical programming method has been developed and utilized in OPROD, an existing computer code for automatic generation of control rod programs as an alternative inner-loop routine for the method of approximate programming. The new routine is constructed of a dual feasible direction algorithm, and consists essentially of two stages of iterative optimization procedures Optimization Procedures I and II. Both follow almost the same algorithm; Optimization Procedure I searches for feasible solutions and Optimization Procedure II optimizes the objective function. Optimization theory and computer simulations have demonstrated that the new routine could find optimum solutions, even if deteriorated initial control rod patterns were given

  7. A program development tool for KEK VME-MAP control system

    International Nuclear Information System (INIS)

    Nakagawa, H.; Katoh, T.; Kadokura, E.; Akiyama, A.; Nigorikawa, K.; Ishii, K.

    1992-01-01

    The control system for KEK 12 GeV Proton Synchrotron has been replaced with a distributed VME-bus based microcomputer system and a MAP local area network. In order to simplify programming for network application tasks, a set of a preprocessor for a PASCAL compiler and a network communication server has been developed. Application programs for accelerator control system have blocks with similar codes; sending, waiting for, receiving, analyzing messages, etc. The preprocessor called 'OBJP' incorporates such common codes into the source code written by an application programmer. In case of a simple program, the size of the source code is reduced by one tenth of a full coding. (author)

  8. Duke Power Company's control rod wear program

    International Nuclear Information System (INIS)

    Culp, D.C.; Kitlan, M.S. Jr.

    1990-01-01

    Recent examinations performed at several foreign and domestic pressurized water reactors have identified significant control rod cladding wear, leading to the conclusion that previously believed control rod lifetimes are not attainable. To monitor control rod performance and reduce safety concerns associated with wear, Duke Power Company has developed a comprehensive control rod wear program for Ag-In-Cd and boron carbide (B 4 C) rods at the McGuire and Catawba nuclear stations. Duke Power currently uses the Westinghouse 17 x 17 Ag-In-Cd control rod design at McGuire Unit 1 and the Westinghouse 17 x 17 hybrid B 4 C control rod design with a Ag-In-Cd tip at McGuire Unit 2 and Catawba Units 1 and 2. The designs are similar, with the exception of the absorber material and clad thickness. There are 53 control rods per unit

  9. Precedent approach to the formation of programs for cyclic objects control

    Science.gov (United States)

    Kulakov, S. M.; Trofimov, V. B.; Dobrynin, A. S.; Taraborina, E. N.

    2018-05-01

    The idea and procedure for formalizing the precedent method of formation of complex control solutions (complex control programs) is discussed with respect to technological or organizational objects, the operation of which is organized cyclically. A typical functional structure of the system of precedent control by complex technological unit is developed, including a subsystem of retrospective optimization of actually implemented control programs. As an example, the problem of constructing replaceable planograms for the operation of the link of a heading-and-winning machine on the basis of precedents is considered.

  10. PLC and DTAM Software Programs for Pumping Instrumentation and Control Skid M

    Energy Technology Data Exchange (ETDEWEB)

    KOCH, M.R.

    2000-02-14

    This document describes the software programs for the Programmable Logic Controller and the Data Table Access Module for Pumping Instrumentation and Control skid ''M''. The Appendices contains copies of the printouts of these software programs.

  11. Programming the control of magnetic field measurements

    International Nuclear Information System (INIS)

    David, L.

    1998-01-01

    This paper gives a short review concerning the new NMR probe measurement control system. Then it presents the new program 'CYCLOCHAMP' attached to the magnetic field measurement which also allows to cycle the magnetic field inside the cyclotrons and to equilibrate it among the SSC sectors. (authors)

  12. Interspecific Mating between Wild and Sterile Fruit Flies of Oriental Fruit Fly, Bactrocera dorsalis (Hendel) with Guava Fruit Fly, Bactrocera correcta (Bezzi) in Cages

    International Nuclear Information System (INIS)

    Pransopon, Prapon; Sutantawong, Manon

    2003-06-01

    Copulation and sperm transfer were observed between wild flies and sterile flies of Bactrocera dorsalis (Hendel) and Bactrocera correcta (Bezzi) in cages. 8-day old pupae of B. dorsalis and B. correcta were irradiated with gamma rays at 90 and 80 gray respectively. Wild flies from infested fruits and sterile flies from artificial diet in the labolatory were used for testing. The experiments were conducted 3 treatments and 3 replications. The ratio of sterile male : wild male: wild female were 3:1:1 by using sterile male of B. dorsalis: wild male of B. correcta : wild female of B. correcta and sterile male of B. correcta: wild male of B. dorsalis: wild female of B. dorsalis as 60:20:20 flies respectively. The experiment found 69 pairs of copulation consisting of 3 mating pairs(4.3%) of wild male with wild female of B. dorsalis, 22 mating pairs (31.9%) of wild male with wild female of B. correcta, 2 mating pairs(2.9%) of sterile male of B dorsalis with wild female of B. correcta, 42 mating pairs(60.9%) of sterile male of B. correcta with wild female of B. dorsalis. The cages which ratio 1:1 consisted of wild B. dorsalis and wild B. correcta (male and female = 50:50 flies) were observed and found that 43 pairs of copulation such as 2 mating pairs (4.6%) of wild male with wild female of B. dorsalis, 26 mating pairs (60.5%) of wild male with wild female of B. correcta, 2 mating pairs(2.9%) of sterile male of B. dorsalis with wild female of B. correcta and 15 mating pairs(34.9%) of wild male of B. correcta with wild female of B. dorsalis. Mated female flies were separated from male flies. Egg hatch and sperm were checked. The hatchability of normal copulation of B. dorsalis and B. correcta were 81 and 90%. The average sperm level in spermathecae of normal copulation of B. dorsalis and B. correcta were 2.2 and 2.3 respectively but had no sperm in their spemathecae of females of interspecific copulations Mating behavior of both species began in the evening before sunset at

  13. Creating a meaningful infection control program: one home healthcare agency's lessons.

    Science.gov (United States)

    Poff, Renee McCoy; Browning, Sarah Via

    2014-03-01

    Creating a meaningful infection control program in the home care setting proved to be challenging for agency leaders of one hospital-based home healthcare agency. Challenges arose when agency leaders provided infection control (IC) data to the hospital's IC Committee. The IC Section Chief asked for national benchmark comparisons to align home healthcare reporting to that of the hospital level. At that point, it was evident that the home healthcare IC program lacked definition and structure. The purpose of this article is to share how one agency built a meaningful IC program.

  14. Purwarupa Sistem Kontrol Elevator Berbasis Programable Logic Control

    Directory of Open Access Journals (Sweden)

    Fathahillah Fathahillah

    2017-12-01

    Full Text Available Various methods / types of controls developed in accordance with industry needs one of them in the field of building automation system. One of the controls in the field of building automation system is the elevator control system (elevator. Early elevator control systems that transport humans or goods as vertical transportation vehicles are still conventional using human power, then evolved using steam engines, until now the elevators use AC motors equipped with control systems. The purpose of this research is to design the prototype of elevator control system using programmable logic control (PLC. The type of PLC controller used in the study using Omron PLC. The results show the design of prototype of elevator control system using PLC successfully and can control eleveator in accordance with its function, besides its programming form can be more simple.

  15. PWM CONTROLLER'S MODELS FOR INVESTIGATION ACS IN SPICEFAMILY ECAD PROGRAMS

    Directory of Open Access Journals (Sweden)

    O. V. VASYLENKO

    2018-05-01

    Full Text Available Purpose. To improve simulation and design of Automatic Control Systems in the SPICE-compatible programs and to obtain separate economic and universal macromodels of PWM controller. Development of an PWM controller economical macromodel for the study of automatic control systems (ACS in computer-aided design (ECAD  programs, which does not generate algorithmic failures in comparison with the existing models of PWM. Findings. Analysis of SPICE-family applications’ mathematical basis allowed to classifying existing models of PWM-controllers, defining their suitability for ACS simulation. The criteria for the synthesis of new models have been defined. For the SPICE 3G algorithms, the Switch and Averaged models based on behavioral elements has been developed. Universal and economical PWM controller macromodel based on the simple algorithm for determining the output signal with minimum numbers of input parameters has been designed. For the Automated Measuring magnetic susceptibility System, the macromodel of quasi-PWM signal generator have been designed, which is used in the compensation subsystem. This model is different from the existing ones: it synthesizes the staircase output signal instead the pulse one, thus, there is direct control of the amplitude of the output signal, which is taken averaged. The adequacy of the models is confirmed as comparison of the simulation results during investigations of the model already existing in the SPICE program, as well as the results of experiments with real ACS. The modeling of the PWM controller was carried out on the basis of behavioral elements from the ECAD library, simulation (solution of algebra-differential equations systems with programming elements is based on SPICE algorithms. The object of the study was the simulation process of ACS with the pulse-width principle of adjusting the output value. The subject of the research are the models of PWM controllers. Originality. The new macromodel of PWM

  16. Computer program for post-flight evaluation of the control surface response for an attitude controlled missile

    Science.gov (United States)

    Knauber, R. N.

    1982-01-01

    A FORTRAN IV coded computer program is presented for post-flight analysis of a missile's control surface response. It includes preprocessing of digitized telemetry data for time lags, biases, non-linear calibration changes and filtering. Measurements include autopilot attitude rate and displacement gyro output and four control surface deflections. Simple first order lags are assumed for the pitch, yaw and roll axes of control. Each actuator is also assumed to be represented by a first order lag. Mixing of pitch, yaw and roll commands to four control surfaces is assumed. A pseudo-inverse technique is used to obtain the pitch, yaw and roll components from the four measured deflections. This program has been used for over 10 years on the NASA/SCOUT launch vehicle for post-flight analysis and was helpful in detecting incipient actuator stall due to excessive hinge moments. The program is currently set up for a CDC CYBER 175 computer system. It requires 34K words of memory and contains 675 cards. A sample problem presented herein including the optional plotting requires eleven (11) seconds of central processor time.

  17. North Fork Feather River Erosion Control Program

    International Nuclear Information System (INIS)

    Harrison, L.

    1991-01-01

    PG and E, an investor owned gas and electric utility serving northern and central California, has been engaged since 1984 in the development and implementation of a regional erosion control program for the 954 square mile northern Sierra Nevada watersheed of the East Branch of the North Fork Feather River in Plumas County, California. PG and E entered into an agreement with 13 governmental agencies and a number of private landowners using Coordinated Resource Management and Planning: to cooperatively develop, fund and implement the program. The group has completed several field projects and has a number of additional projects in various stages of development. This paper reports that the program provides multiple environmental and economic benefits including reduction of soil erosion and sedimentation, improved fisheries, enhancement of riparian habitat, increased land values, improved recreation opportunities, and preservation of watershed resources

  18. Monsanto Mound Laboratory tritium waste control technology development program

    International Nuclear Information System (INIS)

    Bixel, J.C.; Kershner, C.J.; Rhinehammer, T.B.

    1975-01-01

    Over the past four years, implementation of tritium waste control programs has resulted in a 30-fold reduction in the gaseous tritium effluents from Mound Laboratory. However, to reduce tritium waste levels to the ''as low as practicable'' guideline poses problems that are beyond ready solution with state-of-the-art tritium control technology. To meet this advanced technology need, a tritium waste control technology program was initiated. Although the initial thrust of the work under this program was oriented toward development of gaseous effluent treatment systems, its natural evolution has been toward the liquid waste problem. It is thought that, of all the possible approaches to disposal of tritiated liquid wastes, recovery offers the greatest advantages. End products of the recovery processes would be water detritiated to a level below the Radioactivity Concentration Guide (RCG) or detritiated to a level that would permit safe recycle in a closed loop operation and enriched tritium. The detritiated water effluent could be either recycled in a closed loop operation such as in a fuel reprocessing plant or safely released to the biosphere, and the recovered tritium could be recycled for use in fusion reactor studies or other applications

  19. A Clustered Randomized Controlled Trial of the Positive Prevention PLUS Adolescent Pregnancy Prevention Program.

    Science.gov (United States)

    LaChausse, Robert G

    2016-09-01

    To determine the impact of Positive Prevention PLUS, a school-based adolescent pregnancy prevention program on delaying sexual intercourse, birth control use, and pregnancy. I randomly assigned a diverse sample of ninth grade students in 21 suburban public high schools in California into treatment (n = 2483) and control (n = 1784) groups that participated in a clustered randomized controlled trial. Between October 2013 and May 2014, participants completed baseline and 6-month follow-up surveys regarding sexual behavior and pregnancy. Participants in the treatment group were offered Positive Prevention PLUS, an 11-lesson adolescent pregnancy prevention program. The program had statistically significant impacts on delaying sexual intercourse and increasing the use of birth control. However, I detected no program effect on pregnancy rates at 6-month follow-up. The Positive Prevention PLUS program demonstrated positive impacts on adolescent sexual behavior. This suggests that programs that focus on having students practice risk reduction skills may delay sexual activity and increase birth control use.

  20. Development of a standard for computer program verification and control

    International Nuclear Information System (INIS)

    Dunn, T.E.; Ozer, O.

    1980-01-01

    It is expected that adherence to the guidelines of the ANS 10.4 will: 1. Provide confidence that the program conforms to its requirements specification; 2. Provide confidence that the computer program has been adequately evaluated and tested; 3. Provide confidence that program changes are adequately evaluated, tested, and controlled; and 4. Enhance assurance that reliable data will be produced for engineering, scientific, and safety analysis purposes

  1. Automation of program model developing for complex structure control objects

    International Nuclear Information System (INIS)

    Ivanov, A.P.; Sizova, T.B.; Mikhejkina, N.D.; Sankovskij, G.A.; Tyufyagin, A.N.

    1991-01-01

    A brief description of software for automated developing the models of integrating modular programming system, program module generator and program module library providing thermal-hydraulic calcualtion of process dynamics in power unit equipment components and on-line control system operation simulation is given. Technical recommendations for model development are based on experience in creation of concrete models of NPP power units. 8 refs., 1 tab., 4 figs

  2. Advanced Emissions Control Development Program

    Energy Technology Data Exchange (ETDEWEB)

    A.P.Evans; K.E. Redinger; M.J. Holmes

    1998-04-01

    The objective of the Advanced Emissions Control Development Program (AECDP) is to develop practical, cost-effective strategies for reducing the emissions of air toxics from coal-fired boilers. Ideally, the project aim is to effectively control air toxic emissions through the use of conventional flue gas cleanup equipment such as electrostatic precipitators (ESPS), fabric filters (baghouse), and wet flue gas desulfurization. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate and hydrogen chloride. Following the construction and evaluation of a representative air toxics test facility in Phase I, Phase II focused on the evaluation of mercury and several other air toxics emissions. The AECDP is jointly funded by the United States Department of Energy's Federal Energy Technology Center (DOE), the Ohio Coal Development Office within the Ohio Department of Development (oCDO), and Babcock& Wilcox-a McDermott company (B&W).

  3. Artificial intelligence programming with LabVIEW: genetic algorithms for instrumentation control and optimization.

    Science.gov (United States)

    Moore, J H

    1995-06-01

    A genetic algorithm for instrumentation control and optimization was developed using the LabVIEW graphical programming environment. The usefulness of this methodology for the optimization of a closed loop control instrument is demonstrated with minimal complexity and the programming is presented in detail to facilitate its adaptation to other LabVIEW applications. Closed loop control instruments have variety of applications in the biomedical sciences including the regulation of physiological processes such as blood pressure. The program presented here should provide a useful starting point for those wishing to incorporate genetic algorithm approaches to LabVIEW mediated optimization of closed loop control instruments.

  4. Controller design approach based on linear programming.

    Science.gov (United States)

    Tanaka, Ryo; Shibasaki, Hiroki; Ogawa, Hiromitsu; Murakami, Takahiro; Ishida, Yoshihisa

    2013-11-01

    This study explains and demonstrates the design method for a control system with a load disturbance observer. Observer gains are determined by linear programming (LP) in terms of the Routh-Hurwitz stability criterion and the final-value theorem. In addition, the control model has a feedback structure, and feedback gains are determined to be the linear quadratic regulator. The simulation results confirmed that compared with the conventional method, the output estimated by our proposed method converges to a reference input faster when a load disturbance is added to a control system. In addition, we also confirmed the effectiveness of the proposed method by performing an experiment with a DC motor. © 2013 ISA. Published by ISA. All rights reserved.

  5. A novel Python program for implementation of quality control in the ELISA.

    Science.gov (United States)

    Wetzel, Hanna N; Cohen, Cinder; Norman, Andrew B; Webster, Rose P

    2017-09-01

    The use of semi-quantitative assays such as the enzyme-linked immunosorbent assay (ELISA) requires stringent quality control of the data. However, such quality control is often lacking in academic settings due to unavailability of software and knowledge. Therefore, our aim was to develop methods to easily implement Levey-Jennings quality control methods. For this purpose, we created a program written in Python (a programming language with an open-source license) and tested it using a training set of ELISA standard curves quantifying the Fab fragment of an anti-cocaine monoclonal antibody in mouse blood. A colorimetric ELISA was developed using a goat anti-human anti-Fab capture method. Mouse blood samples spiked with the Fab fragment were tested against a standard curve of known concentrations of Fab fragment in buffer over a period of 133days stored at 4°C to assess stability of the Fab fragment and to generate a test dataset to assess the program. All standard curves were analyzed using our program to batch process the data and to generate Levey-Jennings control charts and statistics regarding the datasets. The program was able to identify values outside of two standard deviations, and this identification of outliers was consistent with the results of a two-way ANOVA. This program is freely available, which will help laboratories implement quality control methods, thus improving reproducibility within and between labs. We report here successful testing of the program with our training set and development of a method for quantification of the Fab fragment in mouse blood. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Approximate Dynamic Programming in Tracking Control of a Robotic Manipulator

    Directory of Open Access Journals (Sweden)

    Marcin Szuster

    2016-02-01

    Full Text Available This article focuses on the implementation of an approximate dynamic programming algorithm in the discrete tracking control system of the three-degrees of freedom Scorbot-ER 4pc robotic manipulator. The controlled system is included in an articulated robots group which uses rotary joints to access their work space. The main part of the control system is a dual heuristic dynamic programming algorithm that consists of two structures designed in the form of neural networks: an actor and a critic. The actor generates the suboptimal control law while the critic approximates the difference of the value function from Bellman's equation with respect to the state. The residual elements of the control system are the PD controller, the supervisory term and an additional control signal. The structure of the supervisory term derives from the stability analysis performed using the Lyapunov stability theorem. The control system works online, the neural networks' weights-adaptation procedure is performed in every iteration step, and the neural networks' preliminary learning process is not required. The performance of the control system was verified by a series of computer simulations and experiments performed using the Scorbot-ER 4pc robotic manipulator.

  7. Optimal control of a programmed motion of a rigid spacecraft using redundant kinematics parameterizations

    International Nuclear Information System (INIS)

    El-Gohary, Awad

    2005-01-01

    This paper considers the problem of optimal controlling of a programmed motion of a rigid spacecraft. Given a cost of the spacecraft as a quadratic function of state and control variables we seek for optimal control laws as functions of the state variables and the angle of programmed rotation that minimize this cost and asymptotically stabilize the required programmed motion. The stabilizing properties of the proposed controllers are proved using the optimal Liapunov techniques. Numerical simulation study is presented

  8. Structural optimization of static power control programs of nuclear power plants with WWER-1000

    International Nuclear Information System (INIS)

    Kokol, E.O.

    2015-01-01

    The question of possibility the power control programs switching for WWER-1000 is considered. The aim of this research is to determine the best program for the power control of nuclear reactor under cyclic diurnal behavior of electrical generation, as well as the switching implementation. The considered problem of finding the best control program refers to the multicriteria optimization class of problems. Operation of the nuclear power generation system simulated using the following power control programs: with constant average temperature of transfer fluid, with constant pressure in the reactor secondary circuit, with constant temperature in input of the nuclear reactor. The target function was proposed. It consists of three normalized criteria: the burn up fraction, the damage level of fuel rod array shells, as well as changes in the power values. When simulation of the nuclear power generation system operation within the life was done, the values of the selected criteria were obtained and inserted in the target function. The minimum of three values of the target function depending on the control program at current time defined the criterion of switching of considered static power control programs for nuclear power generation system

  9. Wellness program for anesthesiology residents: a randomized, controlled trial.

    Science.gov (United States)

    Saadat, H; Snow, D L; Ottenheimer, S; Dai, F; Kain, Z N

    2012-10-01

    Multiple reports illustrate the deleterious effects of stress on physicians' mental and physical health, as well as on patient care. This study evaluates the effects of a wellness program on anesthesiology residents' well-being. Sixty residents were randomly assigned to one of three groups: (1) wellness intervention group, (2) no-treatment control with release time, and (3) no-treatment control with routine duties. Coping, stressors, social support, psychological symptoms, and alcohol and tobacco use were measured using a pre-test-post-test design. Residents in the wellness program reported significantly fewer stressors in their role as parent, increased social support at work, greater problem-solving coping, and less anxiety as compared with one or both of the control groups. Findings related to reducing avoidance coping and alcohol consumption also were suggestive of positive intervention effects. An intervention to increase the use of active coping and social support, to reduce reliance on avoidance coping, and to decrease work and family stressors had an overall pattern of beneficial effects on residents' well-being. The importance of offering such programs during residency training, ways to strengthen intervention effectiveness, and areas for future research are discussed. © 2012 The Authors. Acta Anaesthesiologica Scandinavica © 2012 The Acta Anaesthesiologica Scandinavica Foundation.

  10. R and D on thermal hydraulics of core and core-bottom structure

    International Nuclear Information System (INIS)

    Inagaki, Yoshiyuki; Hino, Ryutaro; Kunitomi, Kazuhiko; Takase, Kazuyuki; Ioka, Ikuo; Maruyama, So

    2004-01-01

    Thermal hydraulic tests on the core and core-bottom structure of the high-temperature engineering test reactor (HTTR) were carried out with the helium engineering demonstration loop (HENDEL) under simulated reactor operating conditions. The HENDEL was composed of helium gas circulation loops, mother sections (M 1 and M 2 ) and adaptor section (A), and two test sections, i.e. the fuel stack test section (T 1 ) and in-core structure test section (T 2 ). In the T 1 test section simulating a fuel stack of the core, thermal and hydraulic performances of helium gas flowing through a fuel block were investigated for thermal design of the HTTR core. In the T 2 test section simulating the core-bottom structure, demonstration tests were performed to verify the structural integrity of graphite and metal components, seal performance against helium gas leakage among the graphite permanent blocks and thermal mixing performance of helium gas. The above test results in the T 1 and T 2 test sections were applied to the detailed design and licensing works of the HTTR and the HENDEL-loop was dismantled in 1999

  11. Simulation of the control rod drop under seismic excitations. Experimental program

    International Nuclear Information System (INIS)

    Chaudat, Th.

    2001-01-01

    This paper describes the experimental program that will be performed at the end of 1998 at the CEA Saclay on a specially constructed analytical mock-up of a control rod. The purpose of these tests is to partially validate the current methodology of the drop time numerical calculations of a PWR (pressurized water reactor) control rod under seismic excitations. The French nuclear partners (EDF and FRAMATOME) are involved in this program. (author)

  12. A combined stochastic programming and optimal control approach to personal finance and pensions

    DEFF Research Database (Denmark)

    Konicz, Agnieszka Karolina; Pisinger, David; Rasmussen, Kourosh Marjani

    2015-01-01

    The paper presents a model that combines a dynamic programming (stochastic optimal control) approach and a multi-stage stochastic linear programming approach (SLP), integrated into one SLP formulation. Stochastic optimal control produces an optimal policy that is easy to understand and implement....

  13. Experimental control of a fluidic pinball using genetic programming

    Science.gov (United States)

    Raibaudo, Cedric; Zhong, Peng; Noack, Bernd R.; Martinuzzi, Robert J.

    2017-11-01

    The wake stabilization of a triangular cluster of three rotating cylinders was investigated in the present study. Experiments were performed at Reynolds number Re 6000, and compared with URANS-2D simulations at same flow conditions. 2D2C PIV measurements and constant temperature anemometry were used to characterize the flow without and with actuation. Open-loop actuation was first considered for the identification of particular control strategies. Machine learning control was also implemented for the experimental study. Linear genetic programming has been used for the optimization of open-loop parameters and closed-loop controllers. Considering a cost function J based on the fluctuations of the velocity measured by the hot-wire sensor, significant performances were achieved using the machine learning approach. The present work is supported by the senior author's (R. J. Martinuzzi) NSERC discovery Grant. C. Raibaudo acknowledges the financial support of the University of Calgary Eyes-High PDF program.

  14. Quality control in screening programs for cervical cancer

    International Nuclear Information System (INIS)

    Sarduy Napoles, Miguel

    2012-01-01

    The malignancy of the cervix is one of the few locations avoidable cancers, if detected before it progresses to the infiltration. The most efficient way of early detection is through a screening program to provide women undertaking a regular and quality Pap smear. If this test results abnormal, the program offers easier access to specialized care, effective treatment, and follow-up. The objective of this article is to present usefulness of methods for quality control used in screening programs for cervical cancer to detect their inadequacies. Here are some factors and conditions that must be considered in each of the steps to take, for a cervical cancer screening program to be successful and to meet the objectives proposed in reducing mortality due to this cause. This document contains some useful indexes calculated to ensure quality throughout the process. There should be the measurement of quality throughout the screening process that allows collecting of reliable data as well as correcting deficiencies

  15. Aquatic Plant Control Research Program. Volume A-00-1

    National Research Council Canada - National Science Library

    Kirk, James

    2000-01-01

    ... at the Waterways Experiment Station. It is principally intended to be a forum whereby information pertaining to and resulting from the Corps of Engineers' nationwide Aquatic Plant Control Research Program (APCRP...

  16. Optimal traffic control in highway transportation networks using linear programming

    KAUST Repository

    Li, Yanning; Canepa, Edward S.; Claudel, Christian G.

    2014-01-01

    of the Hamilton-Jacobi PDE, the problem of controlling the state of the system on a network link in a finite horizon can be posed as a Linear Program. Assuming all intersections in the network are controllable, we show that the optimization approach can

  17. Discrete Globalised Dual Heuristic Dynamic Programming in Control of the Two-Wheeled Mobile Robot

    OpenAIRE

    Marcin Szuster; Zenon Hendzel

    2014-01-01

    Network-based control systems have been emerging technologies in the control of nonlinear systems over the past few years. This paper focuses on the implementation of the approximate dynamic programming algorithm in the network-based tracking control system of the two-wheeled mobile robot, Pioneer 2-DX. The proposed discrete tracking control system consists of the globalised dual heuristic dynamic programming algorithm, the PD controller, the supervisory term, and an additional control signal...

  18. Near-Optimal Tracking Control of Mobile Robots Via Receding-Horizon Dual Heuristic Programming.

    Science.gov (United States)

    Lian, Chuanqiang; Xu, Xin; Chen, Hong; He, Haibo

    2016-11-01

    Trajectory tracking control of wheeled mobile robots (WMRs) has been an important research topic in control theory and robotics. Although various tracking control methods with stability have been developed for WMRs, it is still difficult to design optimal or near-optimal tracking controller under uncertainties and disturbances. In this paper, a near-optimal tracking control method is presented for WMRs based on receding-horizon dual heuristic programming (RHDHP). In the proposed method, a backstepping kinematic controller is designed to generate desired velocity profiles and the receding horizon strategy is used to decompose the infinite-horizon optimal control problem into a series of finite-horizon optimal control problems. In each horizon, a closed-loop tracking control policy is successively updated using a class of approximate dynamic programming algorithms called finite-horizon dual heuristic programming (DHP). The convergence property of the proposed method is analyzed and it is shown that the tracking control system based on RHDHP is asymptotically stable by using the Lyapunov approach. Simulation results on three tracking control problems demonstrate that the proposed method has improved control performance when compared with conventional model predictive control (MPC) and DHP. It is also illustrated that the proposed method has lower computational burden than conventional MPC, which is very beneficial for real-time tracking control.

  19. Communicating program outcomes to encourage policymaker support for evidence-based state tobacco control.

    Science.gov (United States)

    Schmidt, Allison M; Ranney, Leah M; Goldstein, Adam O

    2014-12-04

    Tobacco use, the leading cause of preventable death in the U.S., can be reduced through state-level tobacco prevention and cessation programs. In the absence of research about how to communicate the need for these programs to policymakers, this qualitative study aimed to understand the motivations and priorities of policymakers in North Carolina, a state that enacted a strong tobacco control program from 2003-2011, but drastically reduced funding in recent years. Six former legislators (three Democrats, three Republicans) and three lobbyists for health organizations were interviewed about their attitudes towards tobacco use, support of state-funded programs, and reactions to two policy briefs. Five themes emerged: (1) high awareness of tobacco-related health concerns but limited awareness of program impacts and funding, (2) the primacy of economic concerns in making policy decisions, (3) ideological differences in views of the state's role in tobacco control, (4) the impact of lobbyist and constituent in-person appeals, and (5) the utility of concise, contextualized data. These findings suggest that building relationships with policymakers to communicate ongoing program outcomes, emphasizing economic data, and developing a constituent advocacy group would be valuable to encourage continued support of state tobacco control programs.

  20. Provably Correct Control-Flow Graphs from Java Programs with Exceptions

    NARCIS (Netherlands)

    Amighi, A.; de Carvalho Gomes, Pedro; Huisman, Marieke

    2011-01-01

    We present an algorithm to extract flow graphs from Java bytecode, focusing on exceptional control flows. We prove its correctness, meaning that the behaviour of the extracted control-flow graph is an over-approximation of the behaviour of the original program. Thus any safety property that holds

  1. Designing single phase Current-Programmed-Controlled rectifiers by harmonic currents

    DEFF Research Database (Denmark)

    Andersen, Gert Karmisholt; Blaabjerg, Frede

    2002-01-01

    The grid current harmonics of a Current-Programmed-Controlled (CPC) pfc rectifier strongly depends on the choice of switching frequency and switching inductance. This paper describes a new simple and vert fast method to calculate the grid current of a CPC controlled pfc converter. The method...

  2. Staffing and structure of infection prevention and control programs.

    Science.gov (United States)

    Stone, Patricia W; Dick, Andrew; Pogorzelska, Monika; Horan, Teresa C; Furuya, E Yoko; Larson, Elaine

    2009-06-01

    The nature of infection prevention and control is changing; however, little is known about current staffing and structure of infection prevention and control programs. Our objectives were to provide a snapshot of the staffing and structure of hospital-based infection prevention and control programs in the United States. A Web-based survey was sent to 441 hospitals that participate in the National Healthcare Safety Network. The response rate was 66% (n = 289); data were examined on 821 professionals. Infection preventionist (IP) staffing was significantly negatively related to bed size, with higher staffing in smaller hospitals (P hospital epidemiologists were reported to have authority to close beds for outbreaks always or most of the time (n = 225, 78%). Only 32% (n = 92) reported using an electronic surveillance system to track infections. This study is the first to provide a comprehensive description of current infection prevention and control staffing, organization, and support in a select group of hospitals across the nation. Further research is needed to identify effective staffing levels for various hospital types as well as examine how the IP role is changing over time.

  3. Object oriented programming techniques applied to device access and control

    International Nuclear Information System (INIS)

    Goetz, A.; Klotz, W.D.; Meyer, J.

    1992-01-01

    In this paper a model, called the device server model, has been presented for solving the problem of device access and control faced by all control systems. Object Oriented Programming techniques were used to achieve a powerful yet flexible solution. The model provides a solution to the problem which hides device dependancies. It defines a software framework which has to be respected by implementors of device classes - this is very useful for developing groupware. The decision to implement remote access in the root class means that device servers can be easily integrated in a distributed control system. A lot of the advantages and features of the device server model are due to the adoption of OOP techniques. The main conclusion that can be drawn from this paper is that 1. the device access and control problem is adapted to being solved with OOP techniques, 2. OOP techniques offer a distinct advantage over traditional programming techniques for solving the device access problem. (J.P.N.)

  4. Project control support services for the National Waste Terminal Storage Program

    International Nuclear Information System (INIS)

    1977-12-01

    The Boeing Engineering and Construction Company has the responsibility to recommend and assist in designing and implementing a project control system for the Office of Waste Isolation. BEC, after analysis of the OWI management structure and techniques utilized, has recommended the implementation of a Program Control System (PCS) for use by OWI. This system embraces the scope of management needs for visibility and control of cost and schedule performance as well as providing a framework for all the various segments of a complete program control system. Because of the schedule constraints placed on OWI by DOE it was not deemed practical to implement all segments of PCS but rather those that are basic to the concept and can return the greatest short-term benefit. The area of cost and schedule control appears to provide the greatest benefit when combined with the control room techniques for visibility and control. Technical performance is not covered in this report. The segment of PCS titled Integrated Cost/Schedule (IC/S) was used to identify those functions unique to cost and schedule control

  5. Institutional Control Program: Long Term Care and Control of Decommissioned Mine/Mill Sites Located on Crown Land

    International Nuclear Information System (INIS)

    Cunningham, K.

    2014-01-01

    Institutional Control Program: • Establishes an endpoint for mining company activities on sites located on Crown land; • Establishes funding for the long-term care and control of the closed sites; • Company responsibilities for sites under the Environmental Management and Protection Act remain; • Establishes an Institutional Control Registry; • Establishes an Institutional Control Monitoring and Maintenance Fund and an Institutional Control Unforeseen Events Fund

  6. Strong tobacco control program requirements and secure funding are not enough: lessons from Florida.

    Science.gov (United States)

    Kennedy, Allison; Sullivan, Sarah; Hendlin, Yogi; Barnes, Richard; Glantz, Stanton

    2012-05-01

    Florida's Tobacco Pilot Program (TPP; 1998-2003), with its edgy Truth media campaign, achieved unprecedented youth smoking reductions and became a model for tobacco control programming. In 2006, 3 years after the TPP was defunded, public health groups restored funding for tobacco control programming by convincing Florida voters to amend their constitution. Despite the new program's strong legal structure, Governor Charlie Crist's Department of Health implemented a low-impact program. Although they secured the program's strong structure and funding, Florida's nongovernmental public health organizations did not mobilize to demand a high-impact program. Implementation of Florida's Amendment 4 demonstrates that a strong programmatic structure and secure funding are insufficient to ensure a successful public health program, without external pressure from nongovernmental groups.

  7. Knowledge Gaps Impacting the Development of Bovine Viral Diarrhea Virus Control Programs in the United States

    Science.gov (United States)

    This paper identifies knowledge gaps that impact on the design of programs to control and or eradicate bovine viral diarrhea viruses (BVDV) in the United States. Currently there are several voluntary regional BVDV control programs in place. These control programs are aimed at the removal of animals ...

  8. The genetic algorithm for the nonlinear programming of water pollution control system

    Energy Technology Data Exchange (ETDEWEB)

    Wei, J.; Zhang, J. [China University of Geosciences (China)

    1999-08-01

    In the programming of water pollution control system the combined method of optimization with simulation is used generally. It is not only laborious in calculation, but also the global optimum of the obtained solution is guaranteed difficult. In this paper, the genetic algorithm (GA) used in the nonlinear programming of water pollution control system is given, by which the preferred conception for the programming of waste water system is found in once-through operation. It is more succinct than the conventional method and the global optimum of the obtained solution could be ensured. 6 refs., 4 figs., 3 tabs.

  9. Spent Nuclear Fuel Project document control and Records Management Program Description

    International Nuclear Information System (INIS)

    MARTIN, B.M.

    2000-01-01

    The Spent Nuclear Fuel (SNF) Project document control and records management program, as defined within this document, is based on a broad spectrum of regulatory requirements, Department of Energy (DOE) and Project Hanford and SNF Project-specific direction and guidance. The SNF Project Execution Plan, HNF-3552, requires the control of documents and management of records under the auspices of configuration control, conduct of operations, training, quality assurance, work control, records management, data management, engineering and design control, operational readiness review, and project management and turnover. Implementation of the controls, systems, and processes necessary to ensure compliance with applicable requirements is facilitated through plans, directives, and procedures within the Project Hanford Management System (PHMS) and the SNF Project internal technical and administrative procedures systems. The documents cited within this document are those which directly establish or define the SNF Project document control and records management program. There are many peripheral documents that establish requirements and provide direction pertinent to managing specific types of documents that, for the sake of brevity and clarity, are not cited within this document

  10. IMPLICIT DUAL CONTROL BASED ON PARTICLE FILTERING AND FORWARD DYNAMIC PROGRAMMING.

    Science.gov (United States)

    Bayard, David S; Schumitzky, Alan

    2010-03-01

    This paper develops a sampling-based approach to implicit dual control. Implicit dual control methods synthesize stochastic control policies by systematically approximating the stochastic dynamic programming equations of Bellman, in contrast to explicit dual control methods that artificially induce probing into the control law by modifying the cost function to include a term that rewards learning. The proposed implicit dual control approach is novel in that it combines a particle filter with a policy-iteration method for forward dynamic programming. The integration of the two methods provides a complete sampling-based approach to the problem. Implementation of the approach is simplified by making use of a specific architecture denoted as an H-block. Practical suggestions are given for reducing computational loads within the H-block for real-time applications. As an example, the method is applied to the control of a stochastic pendulum model having unknown mass, length, initial position and velocity, and unknown sign of its dc gain. Simulation results indicate that active controllers based on the described method can systematically improve closed-loop performance with respect to other more common stochastic control approaches.

  11. [Analysis of the results of the SEIMC External Quality Control Program. Year 2011].

    Science.gov (United States)

    Ruiz de Gopegui Bordes, Enrique; Guna Serrano, M del Remedio; Orta Mira, Nieves; Ovies, María Rosario; Poveda, Marta; Gimeno Cardona, Concepción

    2013-02-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica [SEIMC]) includes controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology, and molecular microbiology. This article presents the most relevant conclusions and lessons from the 2011 controls. Overall, the results obtained in 2011 confirm the excellent skill and good technical standards found in previous years. Nevertheless, erroneous results can be obtained in any laboratory and in clinically relevant determinations. The results of this program highlight the need to implement both internal and external controls, such as those offered by the SEIMC program, in order to ensure maximal quality of microbiological tests. Copyright © 2013 Elsevier España, S.L. All rights reserved.

  12. [The effects of a weight control program with competence].

    Science.gov (United States)

    Seo, Yeong-Mi; Suh, Sun-Lim

    2007-12-01

    The purpose of this study was to identify the effects of a weight control program and compliancy in overweight women. This program was composed of strategies to modify diet and exercise and to change compliance and self determination over an 8 week period. The subjects were 19 overweight women who participated in our project voluntarily. Data was collected from May 4 to June 30 of 2007. The program consisted of regular rapid walking exercise, diet, mobile phone messages and e-mail. The data was analyzed by Repeated Measures ANOVA using the SPSS WIN program. According to 3 assessment periods, there were significant differences in body weight, body mass index, and compliance. There were no significant differences in self determination. These findings suggest that more intensive interventions may be needed to demonstrate a change in self determination.

  13. HEALS: A Faith-Based Hypertension Control and Prevention Program for African American Churches: Training of Church Leaders as Program Interventionists.

    Science.gov (United States)

    Dodani, Sunita; Sullivan, Debra; Pankey, Sydney; Champagne, Catherine

    2011-01-01

    Background. A 12-session church-based HEALS program (healthy eating and living spiritually) was developed for hypertension control and prevention program in African Americans (AAs). This study presents specifics of training lay health educators to effectively deliver HEALS to high-risk AAs. Methods. A one-day workshop was conducted by the research experts in an AA church. Five church members were recruited to be program interventionists called church health counselors (CHCs). Results. Using principles of adult education, a training protocol was developed with the intention of recognizing and supporting CHCs skills. CHCs received training on delivering HEALS program. The process of training emphasized action methods including role playing and hands-on experience with diet portion measurements. Conclusion. With adequate training, the community lay health educator can be an essential partner in a community-based hypertension control programs. This may motivate program participants more and encourages the individual to make the behavior modifications on a permanent basis.

  14. Communicating Program Outcomes to Encourage Policymaker Support for Evidence-Based State Tobacco Control

    Directory of Open Access Journals (Sweden)

    Allison M. Schmidt

    2014-12-01

    Full Text Available Tobacco use, the leading cause of preventable death in the U.S., can be reduced through state-level tobacco prevention and cessation programs. In the absence of research about how to communicate the need for these programs to policymakers, this qualitative study aimed to understand the motivations and priorities of policymakers in North Carolina, a state that enacted a strong tobacco control program from 2003–2011, but drastically reduced funding in recent years. Six former legislators (three Democrats, three Republicans and three lobbyists for health organizations were interviewed about their attitudes towards tobacco use, support of state-funded programs, and reactions to two policy briefs. Five themes emerged: (1 high awareness of tobacco-related health concerns but limited awareness of program impacts and funding, (2 the primacy of economic concerns in making policy decisions, (3 ideological differences in views of the state’s role in tobacco control, (4 the impact of lobbyist and constituent in-person appeals, and (5 the utility of concise, contextualized data. These findings suggest that building relationships with policymakers to communicate ongoing program outcomes, emphasizing economic data, and developing a constituent advocacy group would be valuable to encourage continued support of state tobacco control programs.

  15. Empowerment Program for People With Prediabetes: A Randomized Controlled Trial.

    Science.gov (United States)

    Chen, Mei-Fang; Hung, Shu-Ling; Chen, Shu-Lin

    2017-04-01

    Practicing a health-promoting lifestyle is believed to be effective for delaying or preventing the onset of diabetes. However, although empowerment interventions have proven effective for encouraging the adoption of a health-promoting lifestyle in people with diabetes, these interventions are rarely promoted to people with prediabetes. The aims of this study were to develop an empowerment program for people with prediabetes and to examine its efficacy in terms of the adoption of a health-promoting lifestyle and improvements in blood sugar, body mass index, and self-efficacy. A randomized controlled trial was conducted between May and December 2013. A convenience sample of people with a fasting blood sugar level of 100-125 mg/dl during the previous 3 months was recruited from the health examination center of a hospital in Kaohsiung, Taiwan. Participants were assigned to either the experimental group or the control group using block randomization with a block size of 8. The experimental group (n = 38) participated in a 4-month empowerment program (the ABC empowerment program), which encouraged participants to practice a health-promoting lifestyle in three phases: awareness raising, behavior building, and results checking. The control group (n = 40) received routine clinical care. Statistical analyses included descriptive statistics, independent t test, paired t test, and generalized estimated equations. After controlling for the differences at baseline and considering the interaction between group and time from baseline to 1 week and 3 months after completing the intervention, the generalized estimating equation showed significantly larger improvements in a health-promoting lifestyle, blood sugar, and self-efficacy in the experimental group than in the control group (p empowerment program was shown to have short-term, positive effects on behavioral, physical, and psychosocial outcomes in a Taiwan population with prediabetes. The results of this study provide a useful

  16. Proposal of a control and quality guarantee program in radiotherapy and radiodiagnosis

    International Nuclear Information System (INIS)

    Tovar Rodas, J.A.

    1998-01-01

    In Guatemala, as regards guarantee and control of quality in the radiotherapy and radiodiagnostic areas, doesn't have until the moment, properly established, an action plan to carry out in systematic form, a program that it satisfies the design requirements and operation in an installation of this nature. However, it is well-known that the techniques that involve the employment of the ionizing radiations are powerful tools for their applications in industry, investigation and medicine; their use should be optimized and the associate risks should be evaluated to prevent them and to limit them. At the moment, the first actions of a guarantee program and quality control are carried out in the radiotherapy area for the intervention of the Secondary Laboratory of Dosimetric Calibration, but the quick growth of this area and the high number of radiodiagnosis facilities that work in the country, they outline the necessity to develop a methodology that solves the problem that is presented by the lack of controls of quality in these practices partly. The present work, presents in first plane the objectives, antecedents, forms of development, available resources and the necessities that are had in each area for the setting in march of the Quality Guarantee Program in Radiotherapy and of the Quality Control Program in Radiodiagnosis

  17. A neo-strategic planning approach to enhance local tobacco control programs.

    Science.gov (United States)

    Douglas, Malinda R; Carter, Sara Sally R; Wilson, Andrew P; Chan, Andie

    2015-01-01

    Research in tobacco control demonstrating best practices is widely disseminated; however, application at the local level is often difficult. Translating research into practice requires a concerted effort to develop an understanding of the evidence and how it can be applied within diverse contexts. A strategic planning infrastructure was developed to support the translation of evidence-based interventions into community practice. This paper highlights the strategic process of turning "know-what" into "know-how" to facilitate the strategic planning and implementation of tobacco control best practices at the local level. The purpose, people, process, and product strategies of knowledge management and translation provided a framework for the strategic planning infrastructure. The knowledge translation concepts of audience, motivations, and mechanisms were synergized in the neo-strategic planning component design. The participants were 20 community coalitions funded to implement local tobacco control programs. From 2004 to 2011, the strategic planners facilitated a cyclical process to translate research into practice using a trio of integrated tools, skill-building workshops on strategic planning, and grantee-driven technical assistance and consultation. In the short term, the usefulness of the strategic planning components to the programs was measured. The intermediate outcome was the successful movement of the community programs from the planning stage to the implementation stage. The achievement of community-level changes in planned tobacco control efforts was the overall outcome measure for the success of the local coalitions. Seventeen of 20 communities that began the planning process implemented strategic plans. All 17 of the programs implemented evidence-based practices, resulting in numerous tobacco-free policies, increased cessation, and increased support from the media and community. Bridging the gap between research and practice can enhance the practicality

  18. Implementation of a quality control program for a 6 MeV linear photon accelerator

    International Nuclear Information System (INIS)

    Berdaky, Mafalda F.; Caldas, Linda V.E.

    2001-01-01

    This paper describes the operational characteristics of the final process of implementation of a quality control program using routine mechanical and radiation tests. The quality control program was performed during 35 months and demonstrated the excellent stability of this accelerator. (author)

  19. Control of octopus arm extension by a peripheral motor program.

    Science.gov (United States)

    Sumbre, G; Gutfreund, Y; Fiorito, G; Flash, T; Hochner, B

    2001-09-07

    For goal-directed arm movements, the nervous system generates a sequence of motor commands that bring the arm toward the target. Control of the octopus arm is especially complex because the arm can be moved in any direction, with a virtually infinite number of degrees of freedom. Here we show that arm extensions can be evoked mechanically or electrically in arms whose connection with the brain has been severed. These extensions show kinematic features that are almost identical to normal behavior, suggesting that the basic motor program for voluntary movement is embedded within the neural circuitry of the arm itself. Such peripheral motor programs represent considerable simplification in the motor control of this highly redundant appendage.

  20. Effectiveness of the home-based alcohol prevention program "In control: No alcohol!": study protocol of a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Verdurmen Jacqueline EE

    2011-08-01

    Full Text Available Abstract Background In the Netherlands, children start to drink at an early age; of the Dutch 12-year olds, 40% reports lifetime alcohol use, while 9.7% reports last-month drinking. Starting to drink at an early age puts youth at risk of developing several alcohol-related problems later in life. Recently, a home-based prevention program called "In control: No alcohol!" was developed to delay the age of alcohol onset in children. The main aim of this project is to conduct a Randomized Controlled Trial (RCT to evaluate the effectiveness of the program. Methods/Design The prevention program will be tested with an RCT among mothers and their 6 grade primary school children (11-12 years old, randomly assigned to the prevention or control condition. The program consists of five printed magazines and an activity book designed to improve parental alcohol-specific socialization. Parent-child dyads in the control group receive a factsheet information brochure, which is the standard alcohol brochure of the Trimbos Institute (the Netherlands Institute for Mental Health and Addiction. Outcome measures are initiation of alcohol use (have been drinking at least one glass of alcohol, alcohol-specific parenting, susceptibility to drinking alcohol, alcohol expectancies, self-efficacy, and frequency and intensity of child alcohol use. Questionnaires will be administered online on secured Internet webpages, with personal login codes for both mothers and children. Mothers and children in both the experimental and control condition will be surveyed at baseline and after 6, 12, and 18 months (follow-ups. Discussion The present study protocol presents the design of an RCT evaluating the effectiveness of the home-based "In control: No alcohol!" program for 6 grade primary school children (11-12 years old. It is hypothesized that children in the prevention condition will be less likely to have their first glass of alcohol, compared to the control condition. When the

  1. Discrete Time McKean–Vlasov Control Problem: A Dynamic Programming Approach

    Energy Technology Data Exchange (ETDEWEB)

    Pham, Huyên, E-mail: pham@math.univ-paris-diderot.fr; Wei, Xiaoli, E-mail: tyswxl@gmail.com [Laboratoire de Probabilités et Modèles Aléatoires, CNRS, UMR 7599, Université Paris Diderot (France)

    2016-12-15

    We consider the stochastic optimal control problem of nonlinear mean-field systems in discrete time. We reformulate the problem into a deterministic control problem with marginal distribution as controlled state variable, and prove that dynamic programming principle holds in its general form. We apply our method for solving explicitly the mean-variance portfolio selection and the multivariate linear-quadratic McKean–Vlasov control problem.

  2. Discrete Time McKean–Vlasov Control Problem: A Dynamic Programming Approach

    International Nuclear Information System (INIS)

    Pham, Huyên; Wei, Xiaoli

    2016-01-01

    We consider the stochastic optimal control problem of nonlinear mean-field systems in discrete time. We reformulate the problem into a deterministic control problem with marginal distribution as controlled state variable, and prove that dynamic programming principle holds in its general form. We apply our method for solving explicitly the mean-variance portfolio selection and the multivariate linear-quadratic McKean–Vlasov control problem.

  3. Cost avoidance techniques through the Fernald controlled area trash segregation program and the RIMIA solid waste reduction program

    International Nuclear Information System (INIS)

    Menche, C.E.

    1997-01-01

    The Fernald Environmental Management Project is a Department of Energy owned facility that produced high quality uranium metals for military defense. The Fernald mission has changed from one of production to remediation. Remediation is intended to clean up legacy (primary) waste from past practices. Little opportunity is available to reduce the amount of primary waste. However, there is an opportunity to reduce secondary waste generation, primarily through segregation. Two programs which accomplish this are the Controlled Area Trash Segregation Program and the RIMIA Solid Waste Reduction Program. With these two programs now in place at the FEMP, it has been estimated that a 60% reduction has been achieved in unnecessary clean waste being disposed as Low Level Waste at the Nevada Test Site. The cost savings associated with these programs (currently 79,000 cubic feet, $428,000) could easily run into the millions of dollars based on the upcoming restoration activities to be undertaken. The segregation of non-radiological waste in the radiologically Controlled Area not only establishes a firm commitment to send only low-level radioactive waste to the Nevada Test Site, but also results in substantial cost avoidance

  4. The Atomic Energy Control Board's regulatory research and support program

    International Nuclear Information System (INIS)

    1988-04-01

    The purpose of the Regulatory Research and Support Program is to augment and extend the capability of the Atomic Energy Control Board's (AECB) regulatory program beyond the capability of in-house resources. The overall objective of the program is to produce pertinent and independent scientific and other knowledge and expertise that will assist the AECB in making correct, timely and credible decisions on regulating the development, application and use of atomic energy. The objectives are achieved through contracted research, development, studies, consultant and other kinds of projects administered by the Research and Radiation Protection Branch (RRB) of the AECB

  5. Structure and management of tuberculosis control programs in fragile states--Afghanistan, DR Congo, Haiti, Somalia.

    Science.gov (United States)

    Mauch, Verena; Weil, Diana; Munim, Aayid; Boillot, Francois; Coninx, Rudi; Huseynova, Sevil; Powell, Clydette; Seita, Akihiro; Wembanyama, Henriette; van den Hof, Susan

    2010-07-01

    Health care delivery is particularly problematic in fragile states often connected with increased incidence of communicable diseases, among them tuberculosis. This article draws upon experiences in tuberculosis control in four fragile states from which four lessons learned were derived. A structured inventory to extract common themes specific for TB control in fragile states was conducted among twelve providers of technical assistance who have worked in fragile states. The themes were applied to the TB control programs of Afghanistan, DR Congo, Haiti and Somalia during the years 2000-2006. Case notifications and treatment outcomes have increased in all four countries since 2003 (treatment success rates 81-90%). Access to care and case detection however have remained insufficient (case detection rates 39-62%); There are four lessons learned: 1. TB control programs can function in fragile states. 2. National program leadership and stewardship are essential for quality and sustained TB control. 3. Partnerships with non-governmental providers are vital for continuous service delivery; 4. TB control programs in fragile states require consistent donor support. Despite challenges in management, coordination, security, logistics and funding, TB control programs can function in fragile states, but face considerable problems in access to diagnosis and treatment and therefore case detection. Copyright (c) 2010 Elsevier Ireland Ltd. All rights reserved.

  6. A Fully Automated Diabetes Prevention Program, Alive-PD: Program Design and Randomized Controlled Trial Protocol.

    Science.gov (United States)

    Block, Gladys; Azar, Kristen Mj; Block, Torin J; Romanelli, Robert J; Carpenter, Heather; Hopkins, Donald; Palaniappan, Latha; Block, Clifford H

    2015-01-21

    In the United States, 86 million adults have pre-diabetes. Evidence-based interventions that are both cost effective and widely scalable are needed to prevent diabetes. Our goal was to develop a fully automated diabetes prevention program and determine its effectiveness in a randomized controlled trial. Subjects with verified pre-diabetes were recruited to participate in a trial of the effectiveness of Alive-PD, a newly developed, 1-year, fully automated behavior change program delivered by email and Web. The program involves weekly tailored goal-setting, team-based and individual challenges, gamification, and other opportunities for interaction. An accompanying mobile phone app supports goal-setting and activity planning. For the trial, participants were randomized by computer algorithm to start the program immediately or after a 6-month delay. The primary outcome measures are change in HbA1c and fasting glucose from baseline to 6 months. The secondary outcome measures are change in HbA1c, glucose, lipids, body mass index (BMI), weight, waist circumference, and blood pressure at 3, 6, 9, and 12 months. Randomization and delivery of the intervention are independent of clinic staff, who are blinded to treatment assignment. Outcomes will be evaluated for the intention-to-treat and per-protocol populations. A total of 340 subjects with pre-diabetes were randomized to the intervention (n=164) or delayed-entry control group (n=176). Baseline characteristics were as follows: mean age 55 (SD 8.9); mean BMI 31.1 (SD 4.3); male 68.5%; mean fasting glucose 109.9 (SD 8.4) mg/dL; and mean HbA1c 5.6 (SD 0.3)%. Data collection and analysis are in progress. We hypothesize that participants in the intervention group will achieve statistically significant reductions in fasting glucose and HbA1c as compared to the control group at 6 months post baseline. The randomized trial will provide rigorous evidence regarding the efficacy of this Web- and Internet-based program in reducing or

  7. Development of Computer-Aided Learning Programs on Nuclear Nonproliferation and Control

    International Nuclear Information System (INIS)

    Kim, Hyun Chul

    2011-01-01

    The fulfillment of international norms for nuclear nonproliferation is indispensable to the promotion of nuclear energy. The education and training for personnel and mangers related to the nuclear material are one of crucial factors to avoid unintended non-compliance to international norms. Korea Institute of Nuclear Nonproliferation and Control (KINAC) has been providing education and training on nuclear control as its legal duty. One of the legally mandatory educations is 'nuclear control education' performed since 2006 for the observation of the international norms on nuclear nonproliferation and the spread of the nuclear control culture. The other is 'physical protection education' performed since 2010 for maintaining the national physical protection regime effectively and the spread of the nuclear security culture. The 2010 Nuclear Security Summit was held in Washington, DC to enhance international cooperation to prevent nuclear terrorism. During the Summit, the South Korea was chosen to host the second Nuclear Summit in 2012. South Korean President announced that South Korea would share its expertise and support the Summit's mission by setting up an international education and training center on nuclear security in 2014. KINAC is making a full effort to set up the center successfully. An important function of the center is education and training in the subjects of nuclear nonproliferation, nuclear safeguards, nuclear security, and nuclear export/import control. With increasing importance of education and training education on nuclear nonproliferation and control, KINAC has been developing computer-aided learning programs on nuclear nonproliferation and control to overcome the weaknesses in classroom educations. This paper shows two learning programs. One is an e-learning system on the nuclear nonproliferation and control and the other is a virtual reality program for training nuclear material accountancy inspection of light water reactor power plants

  8. Development of Computer-Aided Learning Programs on Nuclear Nonproliferation and Control

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun Chul [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2011-10-15

    The fulfillment of international norms for nuclear nonproliferation is indispensable to the promotion of nuclear energy. The education and training for personnel and mangers related to the nuclear material are one of crucial factors to avoid unintended non-compliance to international norms. Korea Institute of Nuclear Nonproliferation and Control (KINAC) has been providing education and training on nuclear control as its legal duty. One of the legally mandatory educations is 'nuclear control education' performed since 2006 for the observation of the international norms on nuclear nonproliferation and the spread of the nuclear control culture. The other is 'physical protection education' performed since 2010 for maintaining the national physical protection regime effectively and the spread of the nuclear security culture. The 2010 Nuclear Security Summit was held in Washington, DC to enhance international cooperation to prevent nuclear terrorism. During the Summit, the South Korea was chosen to host the second Nuclear Summit in 2012. South Korean President announced that South Korea would share its expertise and support the Summit's mission by setting up an international education and training center on nuclear security in 2014. KINAC is making a full effort to set up the center successfully. An important function of the center is education and training in the subjects of nuclear nonproliferation, nuclear safeguards, nuclear security, and nuclear export/import control. With increasing importance of education and training education on nuclear nonproliferation and control, KINAC has been developing computer-aided learning programs on nuclear nonproliferation and control to overcome the weaknesses in classroom educations. This paper shows two learning programs. One is an e-learning system on the nuclear nonproliferation and control and the other is a virtual reality program for training nuclear material accountancy inspection of light water

  9. A Community-Directed Integrated Strongyloides Control Program in Queensland, Australia

    Directory of Open Access Journals (Sweden)

    Adrian Miller

    2018-05-01

    Full Text Available This paper describes two phases of a community-directed intervention to address strongyloidiasis in the remote Aboriginal community of Woorabinda in central Queensland, Australia. The first phase provides the narrative of a community-driven ‘treat-and-test’ mass drug administration (MDA intervention that was co-designed by the Community Health Service and the community. The second phase is a description of the re-engagement of the community in order to disseminate the key factors for success in the previous MDA for Strongyloides stercoralis, as this information was not shared or captured in the first phase. During the first phase in 2004, there was a high prevalence of strongyloidiasis (12% faecal examination, 30% serology; n = 944 community members tested that resulted in increased morbidity and at least one death in the community. Between 2004–2005, the community worked in partnership with the Community Health Service to implement a S. stercoralis control program, where all of the residents were treated with oral ivermectin, and repeat doses were given for those with positive S. stercoralis serology. The community also developed their own health promotion campaign using locally-made resources targeting relevant environmental health problems and concerns. Ninety-two percent of the community residents participated in the program, and the prevalence of strongyloidiasis at the time of the ‘treat-and-test’ intervention was 16.6% [95% confidence interval 14.2–19.3]. The cure rate after two doses of ivermectin was 79.8%, based on pre-serology and post-serology tests. The purpose of this paper is to highlight the importance of local Aboriginal leadership and governance and a high level of community involvement in this successful mass drug administration program to address S. stercoralis. The commitment required of these leaders was demanding, and involved intense work over a period of several months. Apart from controlling strongyloidiasis

  10. Adipocyte lipid synthesis coupled to neuronal control of thermogenic programming

    Directory of Open Access Journals (Sweden)

    Adilson Guilherme

    2017-08-01

    Conclusions: These results demonstrate that downregulation of fatty acid synthesis via FASN depletion in white adipocytes of mature mice can stimulate neuronal signaling to control thermogenic programming in iWAT.

  11. Self-control program in the treatment of obesity.

    Science.gov (United States)

    Rosen, L W

    1981-06-01

    In a pilot study utilizing self-control techniques for the purpose of modifying the cue-reactive eating habits of obese patients, three subjects maintained a continuous weight loss throughout the first year of treatment. Techniques included goal setting, self-monitoring, brief delay and self-confrontation prior to eating unauthorized food and direct observation of oneself in a mirror when eating unauthorized food. All patients are expected to remain in treatment for the foreseeable future with no termination of the program despite apparent success with regard to control of their feeding disturbance. The rationale for this approach is discussed.

  12. Active vibration control testing of the SPICES program: final demonstration article

    Science.gov (United States)

    Dunne, James P.; Jacobs, Jack H.

    1996-05-01

    The Synthesis and Processing of Intelligent Cost Effective Structures (SPICES) Program is a partnership program sponsored by the Advanced Research Projects Agency. The mission of the program is to develop cost effective material processing and synthesis technologies to enable new products employing active vibration suppression and control devices to be brought to market. The two year program came to fruition in 1995 through the fabrication of the final smart components and testing of an active plate combined with two trapezoidal rails, forming an active mount. Testing of the SPICES combined active mount took place at McDonnell Douglas facilities in St. Louis, MO, in October-December 1995. Approximately 15 dB reduction in overall response of a motor mounted on the active structure was achieved. Further details and results of the SPICES combined active mount demonstration testing are outlined. Results of numerous damping and control strategies that were developed and employed in the testing are presented, as well as aspects of the design and fabrication of the SPICES active mount components.

  13. Apollo experience report: Guidance and control systems. Engineering simulation program

    Science.gov (United States)

    Gilbert, D. W.

    1973-01-01

    The Apollo Program experience from early 1962 to July 1969 with respect to the engineering-simulation support and the problems encountered is summarized in this report. Engineering simulation in support of the Apollo guidance and control system is discussed in terms of design analysis and verification, certification of hardware in closed-loop operation, verification of hardware/software compatibility, and verification of both software and procedures for each mission. The magnitude, time, and cost of the engineering simulations are described with respect to hardware availability, NASA and contractor facilities (for verification of the command module, the lunar module, and the primary guidance, navigation, and control system), and scheduling and planning considerations. Recommendations are made regarding implementation of similar, large-scale simulations for future programs.

  14. Qualitative Assessment of Challenges in Tuberculosis Control in West Gojjam Zone, Northwest Ethiopia: Health Workers’ and Tuberculosis Control Program Coordinators’ Perspectives

    Directory of Open Access Journals (Sweden)

    Senedu B. Gebreegziabher

    2016-01-01

    Full Text Available Background. Weak health systems pose many barriers to effective tuberculosis (TB control. This study aimed at exploring health worker’s and TB control program coordinator’s perspectives on health systems challenges facing TB control in West Gojjam Zone, Amhara Region, Ethiopia. Methods. This was a qualitative descriptive study. Eight in-depth interviews with TB control program coordinators and two focus group discussions among 16 health workers were conducted. Purposive sampling was used to recruit study participants. Thematic analysis was used to identify and analyse main themes. Results. We found that intermittent interruptions of laboratory reagents and anti-TB drugs supplies, absence of trained and motivated health workers, poor TB data documentation, lack of adherence to TB treatment guideline, and lack of access to TB diagnostic tools at peripheral health institutions were challenges facing the TB control program performance in the study zone. Conclusions. Ensuring uninterrupted supply of anti-TB drugs and laboratory reagents to all health institutions is essential. Continuous refresher training of health workers on standard TB care and data handling and developing and implementing a sound retention strategy to attract and motivate health professionals to work in rural areas are necessary interventions to improve the TB control program performance in the study zone.

  15. Fetal health locus of control: Scale properties and applications in preconception health programs.

    Science.gov (United States)

    Soliday, Elizabeth; Strahm, Anna; Mammenga, Stefani

    2016-04-01

    Preconception health programs have resulted in improved health behaviors among participants and have shown promise in reducing adverse birth outcomes. However, the role of health beliefs in preconception health program outcomes has been overlooked but warrants attention due to reported positive associations between women's views of control over fetal health and health behavior in pregnancy. Towards an ultimate aim of improving preconception health program reach and effectiveness, we examined properties of a fetal health locus of control (FHLC; Labs & Wurtele, 1986) measure in nulliparous, childbearing aged university women and men. Students (n=1467) completed an online survey that included the FHLC subscales maternal, powerful others', and chance control over fetal health. Factor analyses and correlations with related scales supported the soundness of FHLC constructs in both women and men. All participants rated maternal control in fetal health nearly twice as highly as powerful others' and chance. We therefore recommend that FHLC be integrated into preconception health program evaluation as personal agency in fetal health likely has an important role in women's and men's preconception health behavior and health behavior change. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Discrete Globalised Dual Heuristic Dynamic Programming in Control of the Two-Wheeled Mobile Robot

    Directory of Open Access Journals (Sweden)

    Marcin Szuster

    2014-01-01

    Full Text Available Network-based control systems have been emerging technologies in the control of nonlinear systems over the past few years. This paper focuses on the implementation of the approximate dynamic programming algorithm in the network-based tracking control system of the two-wheeled mobile robot, Pioneer 2-DX. The proposed discrete tracking control system consists of the globalised dual heuristic dynamic programming algorithm, the PD controller, the supervisory term, and an additional control signal. The structure of the supervisory term derives from the stability analysis realised using the Lyapunov stability theorem. The globalised dual heuristic dynamic programming algorithm consists of two structures: the actor and the critic, realised in a form of neural networks. The actor generates the suboptimal control law, while the critic evaluates the realised control strategy by approximation of value function from the Bellman’s equation. The presented discrete tracking control system works online, the neural networks’ weights adaptation process is realised in every iteration step, and the neural networks preliminary learning procedure is not required. The performance of the proposed control system was verified by a series of computer simulations and experiments realised using the wheeled mobile robot Pioneer 2-DX.

  17. Chemical inventory control program for mixed and hazardous waste facilities at SRS

    International Nuclear Information System (INIS)

    Ades, M.J.; Vincent, A.M. III.

    1997-01-01

    Mixed Waste (MW) and Hazardous Waste (HW) are being stored at the Savannah River Site (SRS) pending onsite and/or offsite treatment and disposal. The inventory control for these wastes has recently been brought under Technical Safety Requirements (TSR) in accordance with DOE Order 5480.22. With the TSRs was the question of the degree of rigor with which the inventory is to be tracked, considering that the variety of chemicals present, or that could be present, numbers in the hundreds. This paper describes the graded approach program to track Solid Waste (SW) inventories relative to TSRs. The approach uses a ratio of the maximum anticipated chemical inventory to the permissible inventory in accordance with Emergency Response Planning Guideline (ERPG) limits for on- and off-site receptors. A specific threshold ratio can then be determined. The chemicals above this threshold ratio are to be included in the chemical inventory control program. The chemicals that fall below the threshold ratio are managed in accordance with existing practice per State and RCRA hazardous materials requirements. Additionally, the facilities are managed in accordance with process safety management principles, specifically using process hazards analyses, which provides safety assurance for even the small quantities that may be excluded from the formal inventory control program. The method yields a practical approach to chemical inventory control, while maintaining appropriate chemical safety margins. The resulting number of specific chemicals that require inclusion in a rigorous inventory control program is greatly reduced by about 80%, thereby resulting in significant reduction in chemical data management while preserving appropriate safety margins

  18. Medical Marijuana programs: implications for cannabis control policy--observations from Canada.

    Science.gov (United States)

    Fischer, Benedikt; Kuganesan, Sharan; Room, Robin

    2015-01-01

    While prohibition has been the dominant regime of cannabis control in most countries for decades, an increasing number of countries have been implementing cannabis control reforms recently, including decriminalization or even legalization frameworks. Canada has held out from this trend, although it has among the highest cannabis use rates in the world. Cannabis use is universally criminalized, and the current (conservative) federal government has vowed not to implement any softening reforms to cannabis control. As a result of several higher court decisions, the then federal government was forced to implement a 'medical marijuana access regulations' program in 2001 to allow severely ill patients therapeutic use and access to therapeutic cannabis while shielding them from prosecution. The program's regulations and approval processes were complex and subject to extensive criticism; initial uptake was low and most medical marijuana users continued their use and supply outside the program's auspices. This year, the government introduced new 'marijuana for medical purposes regulations', which allow physicians to 'authorize' medical marijuana use for virtually any health condition for which this is considered beneficial; supply is facilitated by licensed commercial producers. It is expected that some 500,000 users, and dozens of commercial producers will soon be approved under the program, arguably constituting - as with medical marijuana schemes elsewhere, e.g. in California--de facto 'legalization'. We discuss the question whether the evolving scope and realities of 'medical cannabis' provisions in Canada offer a 'sneaky side door' or a 'better third way' to cannabis control reform, and what the potential wider implications are of these developments. Copyright © 2014. Published by Elsevier B.V.

  19. Dairy farmers can change: results of a five-year national mastitis control program in The Netherlands

    NARCIS (Netherlands)

    Jansen, J.; Schaik, van G.; Renes, R.J.; Lam, T.J.G.M.

    2010-01-01

    Over the years, much effort has been put into mastitis control programs. To further improve such programs, we need to understand farmers’ knowledge, attitude and behavior regarding udder health, and the way this can be influenced by mastitis control programs. This study aimed to explore the effect

  20. Drag reduction of a car model by linear genetic programming control

    Science.gov (United States)

    Li, Ruiying; Noack, Bernd R.; Cordier, Laurent; Borée, Jacques; Harambat, Fabien

    2017-08-01

    We investigate open- and closed-loop active control for aerodynamic drag reduction of a car model. Turbulent flow around a blunt-edged Ahmed body is examined at ReH≈ 3× 105 based on body height. The actuation is performed with pulsed jets at all trailing edges (multiple inputs) combined with a Coanda deflection surface. The flow is monitored with 16 pressure sensors distributed at the rear side (multiple outputs). We apply a recently developed model-free control strategy building on genetic programming in Dracopoulos and Kent (Neural Comput Appl 6:214-228, 1997) and Gautier et al. (J Fluid Mech 770:424-441, 2015). The optimized control laws comprise periodic forcing, multi-frequency forcing and sensor-based feedback including also time-history information feedback and combinations thereof. Key enabler is linear genetic programming (LGP) as powerful regression technique for optimizing the multiple-input multiple-output control laws. The proposed LGP control can select the best open- or closed-loop control in an unsupervised manner. Approximately 33% base pressure recovery associated with 22% drag reduction is achieved in all considered classes of control laws. Intriguingly, the feedback actuation emulates periodic high-frequency forcing. In addition, the control identified automatically the only sensor which listens to high-frequency flow components with good signal to noise ratio. Our control strategy is, in principle, applicable to all multiple actuators and sensors experiments.

  1. Design of a PLC control program for a batch plant : VHS case study 1

    NARCIS (Netherlands)

    Mader, A.H.; Brinksma, E.; Wupper, H.; Bauer, N.

    2001-01-01

    This article reports on the systematic design and validation of a PLC control program for the batch plant that has been selected as a case study for the EC project on Verification of Hybrid Systems (VHS). We show how a correct design of the control program can be obtained in an incremental manner

  2. Design of a PLC Control Program for a Batch Plant - VHS Case Study 1

    NARCIS (Netherlands)

    Mader, Angelika H.; Brinksma, Hendrik; Wupper, H.; Bauer, N.

    2001-01-01

    This article reports on the systematic design and validation of a PLC control program for the batch plant that has been selected as a case study for the EC project on Verification of Hybrid Systems (VHS). We show how a correct design of the control program can be obtained in an incremental manner

  3. Control programs of multichannel pulse height analyzer with CAMAC system using FACOM U-200 mini-computer

    International Nuclear Information System (INIS)

    Yamagishi, Kojiro

    1978-02-01

    The 4096 channel Pulse Height Analyzer (PHA) assembled with CAMAC plug-in units has been developed in JAERI. The PHA consists of ADC unit, CRT-display unit, and CAMAC plug-in units, which are memory-controller, MCA-timer, 4K words RAM memory and CRT-driver. The system is on-line connected to FACOM U-200 Mini-Computer through CAMAC interface unit Crate-controller. The softwares for on-line data acquisition of the system have been developed. These are four utility programs written in FORTRAN and two program packages written in assembler language FASP which are CAMAC Program Package and Basic Input/Output Program Package. CAMAC Program Package has 18 subroutine programs for control of CAMAC plug-in units from FACOM U-200 Mini-Computer; and Basic Input/Output Program Package has 26 subroutine programs to input/output data to/from a typewriter, keyboard, cassette magnetic tape and open reel magnetic tape. These subroutine programs are all FORTRAN callable. The PHA with CAMAC system is first outlined, and then usage is described in detail of four utility programs, CAMAC Program Package and Basic Input/Output Program Package. (auth.)

  4. A measurement control program for plutonium isotopic gamma-ray systems at the Rocky Flats Plant

    International Nuclear Information System (INIS)

    Fleissner, J.G.

    1986-01-01

    A sound measurement control (MC) program should be an integral part of every nondestructive assay measurement system used for the assay of special nuclear materials. This paper describes a measurement control program for plutonium isotopic composition measurements, using high-resolution gamma-ray spectroscopy, that has been implemented in the Analytical Laboratories and the Chemistry Standards Laboratory at the Rocky Flats Plant. This MC program emphasizes the standardization of data collection procedures along with the implementation of internal and external measurement control checks to provide the requisite measurement quality assurance

  5. Medicaid/CHIP Program; Medicaid Program and Children's Health Insurance Program (CHIP); Changes to the Medicaid Eligibility Quality Control and Payment Error Rate Measurement Programs in Response to the Affordable Care Act. Final rule.

    Science.gov (United States)

    2017-07-05

    This final rule updates the Medicaid Eligibility Quality Control (MEQC) and Payment Error Rate Measurement (PERM) programs based on the changes to Medicaid and the Children's Health Insurance Program (CHIP) eligibility under the Patient Protection and Affordable Care Act. This rule also implements various other improvements to the PERM program.

  6. The inception and evolution of a unique masters program in cancer biology, prevention and control.

    Science.gov (United States)

    Cousin, Carolyn; Blancato, Jan

    2010-09-01

    The University of the District of Columbia (UDC) and the Lombardi Comprehensive Cancer Center (LCCC), Georgetown University Medical Center established a Masters Degree Program in Cancer Biology, Prevention and Control at UDC that is jointly administered and taught by UDC and LCCC faculty. The goal of the Masters Degree Program is to educate students as master-level cancer professionals capable of conducting research and service in cancer biology, prevention, and control or to further advance the education of students to pursue doctoral studies. The Program's unique nature is reflected in its philosophy "the best cancer prevention and control researchers are those with a sound understanding of cancer biology". This program is a full-time, 2-year, 36-credit degree in which students take half of their coursework at UDC and half of their coursework at LCCC. During the second year, students are required to conduct research either at LCCC or UDC. Unlike most cancer biology programs, this unique Program emphasizes both cancer biology and cancer outreach training.

  7. A computer program for controlling a university radioactive material inventory: From confusion to computer to control

    International Nuclear Information System (INIS)

    Robb, D.B.; Riches, C.G.; O'Brian, M.J.; Riordan, F.J.

    1984-01-01

    The University of Washington is a large user of radioactive material. Over 250 authorized programs are working in over 600 labs with nearly 3500 orders of radioactive material per year. The state license sets limits on the total amount of material on campus. There are also limits on sewer disposal. To meet these needs it is necessary to know the amount of material on campus at any time. A computer program was developed which covered many aspects of the radiation safety record needs including inventory control. Inventory is now managed by tracking each order from purchase to disposal. A screen menu as part of the interactive program allows immediate and detailed information about the inventory at time of purchase approval and delivery. Because of this system our knowledge and control of radionuclide work on campus has increased dramatically. A description of how this system is used during ordering, delivery and disposal will be given. Details on the methods to check limits are included along with a summary of the reports made possible by the current data files

  8. Statistical Process Control in the Practice of Program Evaluation.

    Science.gov (United States)

    Posavac, Emil J.

    1995-01-01

    A technique developed to monitor the quality of manufactured products, statistical process control (SPC), incorporates several features that may prove attractive to evaluators. This paper reviews the history of SPC, suggests how the approach can enrich program evaluation, and illustrates its use in a hospital-based example. (SLD)

  9. Improving bovine udder health: A national mastitis control program in the Netherlands

    NARCIS (Netherlands)

    Lam, T.J.G.M.; Borne, van den B.H.P.; Jansen, J.; Huijps, K.; Veersen, J.C.L.; Schaick, van G.; Hogeveen, H.

    2013-01-01

    Because of increasing bulk milk somatic cell counts and continuous clinical mastitis problems in a substantial number of herds, a national mastitis control program was started in 2005 to improve udder health in the Netherlands. The program started with founding the Dutch Udder Health Centre (UGCN),

  10. Lawrence Livermore Laboratory's beryllium control program for high-explosive test firing bunkers and tables

    International Nuclear Information System (INIS)

    Johnson, J.S.

    1980-01-01

    This report on the control program to minimize beryllium levels in Laboratory workplaces includes an outline of beryllium surface, soil, and air levels and an 11-y summary of sampling results from two high-use, high-explosive test firing bunkers. These sampling data and other studies demonstrate that the beryllium control program is functioning effectively

  11. An Electronic Workshop on the Performance Seeking Control and Propulsion Controlled Aircraft Results of the F-15 Highly Integrated Digital Electronic Control Flight Research Program

    Science.gov (United States)

    Powers, Sheryll Goecke (Compiler)

    1995-01-01

    Flight research for the F-15 HIDEC (Highly Integrated Digital Electronic Control) program was completed at NASA Dryden Flight Research Center in the fall of 1993. The flight research conducted during the last two years of the HIDEC program included two principal experiments: (1) performance seeking control (PSC), an adaptive, real-time, on-board optimization of engine, inlet, and horizontal tail position on the F-15; and (2) propulsion controlled aircraft (PCA), an augmented flight control system developed for landings as well as up-and-away flight that used only engine thrust (flight controls locked) for flight control. In September 1994, the background details and results of the PSC and PCA experiments were presented in an electronic workshop, accessible through the Dryden World Wide Web (http://www.dfrc.nasa.gov/dryden.html) and as a compact disk.

  12. Lawrence Livermore Laboratory's beryllium control program for high-explosive test firing bunkers and tables

    International Nuclear Information System (INIS)

    Johnson, J.S.

    1978-01-01

    This detailed report on Lawrence Livermore Laboratory's control program to minimize beryllium levels in Laboratory workplaces includes an outline of beryllium surface, soil, and air levels and an 11-y summary of sampling results from two high-use, high-explosive test firing bunkers. These sampling data and other studies demonstrate that the beryllium control program is funcioning effectively

  13. [Analysis of the results of the SEIMC External Quality Control Program. Year 2012].

    Science.gov (United States)

    de Gopegui Bordes, Enrique Ruiz; Guna Serrano, M del Remedio; Orta Mira, Nieves; Ovies, María Rosario; Poveda, Marta; Gimeno Cardona, Concepción

    2014-02-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. This article presents the most relevant conclusions and lessons from the 2012 controls. As a whole, the results obtained in 2012 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. Once again, the results of this program highlighted the need to implement both internal and external controls in order to assure the maximal quality of the microbiological tests. Copyright © 2014 Elsevier España, S.L. All rights reserved.

  14. [Analysis of the results of the SEIMC External Quality Control Program. Year 2014].

    Science.gov (United States)

    Gopegui Bordes, Enrique Ruiz de; Guna Serrano, M Del Remedio; Orta Mira, Nieves; Medina González, Rafael; Rosario Ovies, María; Poveda, Marta; Gimeno Cardona, Concepción

    2016-07-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. This article presents the most relevant conclusions and lessons from the 2014 controls. As a whole, the results obtained in 2014 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. Once again, the results of the SEIMC program highlighted the need to implement both internal and external controls in order to assure the maximal quality of the microbiological tests. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

  15. [Analysis of the results of the SEIMC External Quality Control Program. Year 2008].

    Science.gov (United States)

    Serrano, María del Remedio Guna; Mira, Nieves Orta; de Gopegui, Enrique Ruiz; Ovies, María Rosario; Cardona, Concepción Gimeno; Pérez, José L

    2010-01-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria and virology. This article present the most relevant conclusions and lessons from the 2008 controls. As a whole, the results obtained in 2008 confirm the excellent skill and good technical standards of the microbiology laboratories in Spain found in previous editions. However, a few deviations can be obtained in any laboratory, even in clinically relevant determinations. Once again, the results of this program highlighted the need to implement both internal an external controls in order to assure the maximal quality of the microbiological tests. 2010 Elsevier España S.L. All rights reserved.

  16. [Analysis of the results of the SEIMC External Quality Control Program. Year 2009].

    Science.gov (United States)

    de Gopegui Bordes, Enrique Ruiz; del Remedio Guna Serrano, M; Orta Mira, Nieves; Ovies, María; Poveda, Marta; Gimeno Cardona, Concepción; Pérez, José L

    2011-03-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) includes controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. In this article, the most important conclusions and lessons from the 2009 controls are presented. As a whole, the results obtained in 2009 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. The results of this program highlight the need to implement both internal and external controls in order to ensure maximal quality of microbiological tests. Copyright © 2011 Elsevier España S.L. All rights reserved.

  17. A Comparison of Types of Robot Control for Programming by Demonstration

    DEFF Research Database (Denmark)

    Fischer, Kerstin; Kirstein, Franziska; Jensen, Lars Christian

    2016-01-01

    Programming by Demonstration (PbD) is an efficient way for non-experts to teach new skills to a robot. PbD can be carried out in different ways, for instance, by kinesthetic guidance, teleoperation or by using external controls. In this paper, we compare these three ways of controlling a robot in...

  18. School-Based Smoking Prevention Programs for Middle School Students in Nowshahr- Iran: a Randomized Controlled Trial

    Directory of Open Access Journals (Sweden)

    Maryam Khazaee-Pool

    2016-11-01

    Full Text Available Background: Smoking among youths is a main public health concern, and detecting predictors of smoking is essential for designing preventive programs. Any interventional program should plan with highlighting on behavioral change models and based on operative interventional program. So, this study aimed to investigate school-based smoking prevention programs for middle school students in Nowshahr, Iran.Materials and Methods: A quasi-experimental study was performed with 280 male students aged 15-17 years selected by multistage sampling. For this purpose, 6 middle schools were randomly recruited from male students in Nowshahr- Iran. Then, 140 students were randomly chosen for each the experimental and the control groups. After pretest, educational program based on Health Belief Model were performed in experimental group. Also, post-test was applied four months after interventional program in both experimental and control group.Results: Based on the results, the prevalence of smoking was higher at age 14 old in both experimental (38.7% and control (30 % groups. About 35% of participants in the experimental group and 33.6% in control group had smoker father. Additionally, 10% in experimental group and 7.8% in control group had smoker mother. Most main cause for smoking in 57.9% of the experimental group and 52.63% of the control group was reducing anxiety. Results also shown that there was a significant difference between students in the experimental and control groups after performing educational program in the mean scores of perceived susceptibility, perceived severity, perceived benefits, perceived barriers, perceived self-efficacy, and preventive behaviors of smoking (P < 0.05.Conclusion: By performing educational program, it was found that the prevalence of cigarette smoking was decreased in the intervention group. So, with a better understanding of factors affecting on this complex behavior (cigarette smoking, it can be a valuable phase to

  19. A work-site weight control program using financial incentives collected through payroll deduction.

    Science.gov (United States)

    Forster, J L; Jeffery, R W; Sullivan, S; Snell, M K

    1985-11-01

    In a work-site weight control program using a self-motivational program of financial incentives implemented through payroll deduction, 131 university employees chose weight loss goals (0 to 60 lb) and incentives (+5 to +30) to be deducted from each paycheck for six months. Return of incentive money was contingent on progress toward weight goals. Participants were assigned randomly to one of four protocols, involving group educational sessions v self-instruction only and required v optional attendance at weigh-ins and sessions. Overall, dropout rates (21.4%) and mean weight loss (12.2 lb) were encouraging, especially compared with those of other work-site programs. Weight loss was positively associated with attendance at weigh-ins and educational sessions. However, requiring attendance did not increase program effectiveness and seemed also to discourage enrollment among men. The weight control program was equally effective when offered with professionally led educational sessions or when accompanied by self-instructional materials only.

  20. Automated Generation of Formal Models from ST Control Programs for Verification Purposes

    CERN Document Server

    Fernandez Adiego, B; Tournier, J-C; Blanco Vinuela, E; Blech, J-O; Gonzalez Suarez, V

    2014-01-01

    In large industrial control systems such as the ones installed at CERN, one of the main issues is the ability to verify the correct behaviour of the Programmable Logic Controller (PLC) programs. While manual and automated testing can achieve good results, some obvious problems remain unsolved such as the difficulty to check safety or liveness properties. This paper proposes a general methodology and a tool to verify PLC programs by automatically generating formal models for different model checkers out of ST code. The proposed methodology defines an automata-based formalism used as intermediate model (IM) to transform PLC programs written in ST language into different formal models for verification purposes. A tool based on Xtext has been implemented that automatically generates models for the NuSMV and UPPAAL model checkers and the BIP framework.

  1. Study on Production Management in Programming of Computer Numerical Control Machines

    Directory of Open Access Journals (Sweden)

    Gheorghe Popovici

    2014-12-01

    Full Text Available The paper presents the results of a study regarding the need for technology in programming for machinetools with computer-aided command. Engineering is the science of making skilled things. That is why, in the "factory of the future", programming engineering will have to realise the part processing on MU-CNCs (Computer Numerical Control Machines in the optimum economic variant. There is no "recipe" when it comes to technologies. In order to select the correct variant from among several technical variants, 10 technological requirements are forwarded for the engineer to take into account in MU-CNC programming. It is the first argued synthesis of the need for technological knowledge in MU-CNC programming.

  2. The high beta tokamak-extended pulse magnetohydrodynamic mode control research program

    International Nuclear Information System (INIS)

    Maurer, D A; Bialek, J; Byrne, P J; De Bono, B; Levesque, J P; Li, B Q; Mauel, M E; Navratil, G A; Pedersen, T S; Rath, N; Shiraki, D

    2011-01-01

    The high beta tokamak-extended pulse (HBT-EP) magnetohydrodynamic (MHD) mode control research program is studying ITER relevant internal modular feedback control coil configurations and their impact on kink mode rigidity, advanced digital control algorithms and the effects of plasma rotation and three-dimensional magnetic fields on MHD mode stability. A new segmented adjustable conducting wall has been installed on the HBT-EP and is made up of 20 independent, movable, wall shell segments instrumented with three distinct sets of 40 saddle coils, totaling 120 in-vessel modular feedback control coils. Each internal coil set has been designed with varying toroidal angular coil coverage of 5, 10 and 15 0 , spanning the toroidal angle range of an ITER port plug based internal coil to test resistive wall mode (RWM) interaction and multimode MHD plasma response to such highly localized control fields. In addition, we have implemented 336 new poloidal and radial magnetic sensors to quantify the applied three-dimensional fields of our control coils along with the observed plasma response. This paper describes the design and implementation of the new control shell incorporating these control and sensor coils on the HBT-EP, and the research program plan on the upgraded HBT-EP to understand how best to optimize the use of modular feedback coils to control instability growth near the ideal wall stabilization limit, answer critical questions about the role of plasma rotation in active control of the RWM and the ferritic resistive wall mode, and to improve the performance of MHD control systems used in fusion experiments and future burning plasma systems.

  3. REP activities of the conference of radiation control program directors

    International Nuclear Information System (INIS)

    Bevill, B.

    1995-01-01

    This talk provides an overview of the activities within the Conference of Radiation Control Program Directors associated with Radiological Emergency Preparedness. Included are summaries of interactions with FEMA, with US DOE, with US FDA, and with US DOT

  4. [A school program for dengue control in Honduras: from knowledge to action].

    Science.gov (United States)

    Avila Montes, Gustavo Adolfo; Araujo, Roxana; Leontsini, Elli; Orellana Herrera, Gabriel; Fernández Cerna, Eduardo

    2012-06-01

    The Environmental School Program (PEA, for its Spanish acronym), a dengue control initiative focused on primary schools that took place during 2005-2010 in several cities in Honduras, is described. The environmental health program was designed to increase knowledge and develop skills in the identification and control of Aedes aegypti breeding sites, as well as in water and solid waste management. The results, as measured by behavioral change and reduced larval indices, were satisfactory in the majority of the participating schools. The initiative involved not only children, but also their parents and teachers. In addition to reducing larval indices, PEA was successful in promoting community participation in environmental issues, particularly Aedes control. The inclusion of this educational content in the primary school curriculum in Honduras remains pending.

  5. Software requirements specification for the program analysis and control system risk management module

    International Nuclear Information System (INIS)

    SCHAEFER, J.C.

    1999-01-01

    TWR Program Analysis and Control System Risk Module is used to facilitate specific data processes surrounding the Risk Management program of the Tank Waste Retrieval environment. This document contains the Risk Management system requirements of the database system

  6. Radiotherapy procedures quality control program: Guidelines established by the Spanish Society of Radiotherapy and Oncology

    International Nuclear Information System (INIS)

    Palacios, A.; Pardo, J.; Valls, A.; Petschen, I.; Castell, A.; Villar, A.; Pedro Olive, B.A.; Munoz, V.; Fernandez, J.; Rodriguez, R.; Oton, C.

    2001-01-01

    The main purpose of the Royal Decree 1566/1998 of July 17 th , is to establish the quality criteria in radiation therapy in order to assure the optimisation of both radiation oncology treatments and radiation protection of the patients. According to this decree, the implementation of a quality control program in the radiation oncology departments is imperative. This program must be in writing and always available for supervision of health authorities. When necessary, modifications to improve non-optimal procedures or equipment will be made. The Spanish Society of Radiotherapy and Oncology, in order to co-operate and facilitate to all its members, set up a task force focussing on elaborating a set of guidelines that every single Radiation Oncology Department could use to develop its own quality control program. No agreements regarding equipment quality control were made by the Commission, in spite they are a part of the quality control program in radiotherapy, because it is considered that they correspond to members of other scientific societies. (author)

  7. Control program for punched paper tape for the PDP-8/1 computer

    International Nuclear Information System (INIS)

    German, U.

    1976-01-01

    A program was developed for the PDP-8/1 computer to control the punched paper tape supplied by the measuring instruments. Any departure from the program is detected by an optical reader which stops the tape and displays the error on an accumulator. This program which is suitable for large amounts of data punched on paper tape has been in use at the Beer-Sheva laboratories for detecting errors in the sample changing operation. (B.G.)

  8. Averaging and Linear Programming in Some Singularly Perturbed Problems of Optimal Control

    Energy Technology Data Exchange (ETDEWEB)

    Gaitsgory, Vladimir, E-mail: vladimir.gaitsgory@mq.edu.au [Macquarie University, Department of Mathematics (Australia); Rossomakhine, Sergey, E-mail: serguei.rossomakhine@flinders.edu.au [Flinders University, Flinders Mathematical Sciences Laboratory, School of Computer Science, Engineering and Mathematics (Australia)

    2015-04-15

    The paper aims at the development of an apparatus for analysis and construction of near optimal solutions of singularly perturbed (SP) optimal controls problems (that is, problems of optimal control of SP systems) considered on the infinite time horizon. We mostly focus on problems with time discounting criteria but a possibility of the extension of results to periodic optimization problems is discussed as well. Our consideration is based on earlier results on averaging of SP control systems and on linear programming formulations of optimal control problems. The idea that we exploit is to first asymptotically approximate a given problem of optimal control of the SP system by a certain averaged optimal control problem, then reformulate this averaged problem as an infinite-dimensional linear programming (LP) problem, and then approximate the latter by semi-infinite LP problems. We show that the optimal solution of these semi-infinite LP problems and their duals (that can be found with the help of a modification of an available LP software) allow one to construct near optimal controls of the SP system. We demonstrate the construction with two numerical examples.

  9. Tuberculosis control program in the municipal context: performance evaluation

    Directory of Open Access Journals (Sweden)

    Tiemi Arakawa

    Full Text Available ABSTRACT OBJECTIVE The objective of this study is to evaluate the performance of the Tuberculosis Control Program in municipalities of the State of São Paulo. METHODS This is a program evaluation research, with ecological design, which uses three non-hierarchical groups of the municipalities of the State of São Paulo according to their performance in relation to operational indicators. We have selected 195 municipalities with at least five new cases of tuberculosis notified in the Notification System of the State of São Paulo and with 20,000 inhabitants or more in 2010. The multiple correspondence analysis was used to identify the association between the groups of different performances, the epidemiological and demographic characteristics, and the characteristics of the health systems of the municipalities. RESULTS The group with the worst performance showed the highest rates of abandonment (average [avg] = 10.4, standard deviation [sd] = 9.4 and the lowest rates of supervision of Directly Observed Treatment (avg = 6.1, sd = 12.9, and it was associated with low incidence of tuberculosis, high tuberculosis and HIV, small population, high coverage of the Family Health Strategy/Program of Community Health Agents, and being located on the countryside. The group with the best performance presented the highest cure rate (avg = 83.7, sd = 10.5 and the highest rate of cases in Directly Observed Treatment (avg = 83.0, sd = 12.7; the group of regular performance showed regular results for outcome (avg cure = 79.8, sd = 13.2; abandonment avg = 9.5, sd = 8.3 and supervision of the Directly Observed Treatment (avg = 42.8, sd = 18.8. Large population, low coverage of the Family Health Strategy/Program of Community Health Agents, high incidence of tuberculosis and AIDS, and being located on the coast and in metropolitan areas were associated with these groups. CONCLUSIONS The findings highlight the importance of the Directly Observed Treatment in relation

  10. The control and execution of programmed cell death

    International Nuclear Information System (INIS)

    Begum, R.; Pathak, N.; Hasnain, S.E.; Sah, N.K.; Athar, M.

    1999-01-01

    Apoptosis or programmed cell death is a highly conserved genetically controlled response of metazoan cells to commit suicide. Non apoptotic programmed cell death seems to operate in single celled eukaryotes implying that evolution of PCD has preceded the evolution of multicellularity. PCD plays a crucial role in the regulation of cellular and tissue homeostasis and any aberrations in apoptosis leads to several diseases including cancer, neurodegenerative disorders and AIDS. The mechanisms by which apoptosis is controlled are varied. In some cells, members of bcl-2 family or p53 are crucial for regulating the apoptosis programme, whereas in other cells Fas ligand is more important. bcl-2 family members have a prime role in the regulation of cell death at all stages including development, whereas cell death during development is independent of p53. bcl-2 family members being localized on the outer mitochondrial membrane, control the mitochondrial homeostasis and cytochrome c redistribution and thereby regulate the cell death process. p53 promotes DNA damage mediated cell death after growth arrest and failed DNA repair. Caspases play a key role in the execution of cell death by mediating highly specific cleavages of crucial cellular proteins collectively manifesting the apoptotic phenotype. Protein inhibitors like crm A, p35 and IAPs could prevent/control apoptosis induced by a broad array of cell death stimuli by several mechanisms specially interfering in caspase activation or caspase activity. Among endonucleases, caspase activated DNase (CAD) plays a crucial role in DNA fragmentation, a biochemical hallmark of apoptosis. As regulation of cell death seems to be as complex as regulation of cell proliferation, multiple kinase mediated regulatory mechanisms might control the apoptotic process. Thus, in spite of intensive research over the past few years, the field of apoptosis still remains fertile to unravel among others, the molecular mechanisms of cytochrome c

  11. The control and execution of programmed cell death

    Energy Technology Data Exchange (ETDEWEB)

    Begum, R.; Pathak, N.; Hasnain, S.E.; Sah, N.K. [National Inst. of Immunology, New Delhi (India). Eukaryotic Gene Expression Lab.; Taneja, T.K.; Mohan, M. [National Inst. of Immunology, New Delhi (India). Eukaryotic Gene Expression Lab.]|[Dept. of Medical Elementology and Toxicology, New Delhi (India); Athar, M. [Dept. of Medical Elementology and Toxicology, New Delhi (India)

    1999-07-01

    Apoptosis or programmed cell death is a highly conserved genetically controlled response of metazoan cells to commit suicide. Non apoptotic programmed cell death seems to operate in single celled eukaryotes implying that evolution of PCD has preceded the evolution of multicellularity. PCD plays a crucial role in the regulation of cellular and tissue homeostasis and any aberrations in apoptosis leads to several diseases including cancer, neurodegenerative disorders and AIDS. The mechanisms by which apoptosis is controlled are varied. In some cells, members of bcl-2 family or p53 are crucial for regulating the apoptosis programme, whereas in other cells Fas ligand is more important. bcl-2 family members have a prime role in the regulation of cell death at all stages including development, whereas cell death during development is independent of p53. bcl-2 family members being localized on the outer mitochondrial membrane, control the mitochondrial homeostasis and cytochrome c redistribution and thereby regulate the cell death process. p53 promotes DNA damage mediated cell death after growth arrest and failed DNA repair. Caspases play a key role in the execution of cell death by mediating highly specific cleavages of crucial cellular proteins collectivley manifesting the apoptotic phenotype. Protein inhibitors like crm A, p35 and IAPs could prevent/control apoptosis induced by a broad array of cell death stimuli by several mechanisms specially interfering in caspase activation or caspase activity. Among endonucleases, caspase activated DNase (CAD) plays a crucial role in DNA fragmentation, a biochemical hallmark of apoptosis. As regulation of cell death seems to be as complex as regulation of cell proliferation, multiple kinase mediated regulatory mechanisms might control the apoptotic process. Thus, in spite of intensive research over the past few years, the field of apoptosis still remains fertile to unravel among others, the molecular mechanisms of cytochrome c

  12. A 3-Year Workplace-Based Intervention Program to Control Noncommunicable Disease Risk Factors in Sousse, Tunisia.

    Science.gov (United States)

    Bhiri, Sana; Maatoug, Jihene; Zammit, Nawel; Msakni, Zineb; Harrabi, Imed; Amimi, Souad; Mrizek, Nejib; Ghannem, Hassen

    2015-07-01

    To assess the effectiveness of a 3-year workplace-based intervention program on the control of the main noncommunicable disease risk factors (poor nutrition, physical inactivity, and tobacco use) among the employees of Sousse, Tunisia. We conducted a quasi-experimental study (pre- and postassessments with intervention and control groups) in six companies of the governorate of Sousse in Tunisia.The intervention program consisted of health education programs (eg, workshops, films and open sensitization days). We also scheduled free physical activity sessions and free smoking cessation consultations. Our intervention program showed meaningful improvement among the employees toward dietary and physical activity behaviors but not for tobacco use. Workplace is a crucial setting for health promotion, and future programs should consider a multisectoral approach to control the main noncommunicable disease risk factors.

  13. [Analysis of the results of the SEIMC External Quality Control Program. Year 2013].

    Science.gov (United States)

    de Gopegui Bordes, Enrique Ruiz; Orta Mira, Nieves; Del Remedio Guna Serrano, M; Medina González, Rafael; Rosario Ovies, María; Poveda, Marta; Gimeno Cardona, Concepción

    2015-07-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) include controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology, molecular microbiology and HIV-1, HCV and HBV viral loads. This manuscript presents the analysis of results obtained of the participants from the 2013 SEIMC External Quality Control Programme, except viral loads controls, that they are summarized in a manuscript abroad. As a whole, the results obtained in 2013 confirm the excellent skill and good technical standards found in previous editions. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. Once again, the results of this program highlighted the need to implement both internal and external controls in order to assure the maximal quality of the microbiological tests. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

  14. Verification and Validation of Heat Transfer Model of AGREE Code

    Energy Technology Data Exchange (ETDEWEB)

    Tak, N. I. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Seker, V.; Drzewiecki, T. J.; Downar, T. J. [Department of Nuclear Engineering and Radiological Sciences, Univ. of Michigan, Michigan (United States); Kelly, J. M. [US Nuclear Regulatory Commission, Washington (United States)

    2013-05-15

    The AGREE code was originally developed as a multi physics simulation code to perform design and safety analysis of Pebble Bed Reactors (PBR). Currently, additional capability for the analysis of Prismatic Modular Reactor (PMR) core is in progress. Newly implemented fluid model for a PMR core is based on a subchannel approach which has been widely used in the analyses of light water reactor (LWR) cores. A hexagonal fuel (or graphite block) is discretized into triangular prism nodes having effective conductivities. Then, a meso-scale heat transfer model is applied to the unit cell geometry of a prismatic fuel block. Both unit cell geometries of multi-hole and pin-in-hole types of prismatic fuel blocks are considered in AGREE. The main objective of this work is to verify and validate the heat transfer model newly implemented for a PMR core in the AGREE code. The measured data in the HENDEL experiment were used for the validation of the heat transfer model for a pin-in-hole fuel block. However, the HENDEL tests were limited to only steady-state conditions of pin-in-hole fuel blocks. There exist no available experimental data regarding a heat transfer in multi-hole fuel blocks. Therefore, numerical benchmarks using conceptual problems are considered to verify the heat transfer model of AGREE for multi-hole fuel blocks as well as transient conditions. The CORONA and GAMMA+ codes were used to compare the numerical results. In this work, the verification and validation study were performed for the heat transfer model of the AGREE code using the HENDEL experiment and the numerical benchmarks of selected conceptual problems. The results of the present work show that the heat transfer model of AGREE is accurate and reliable for prismatic fuel blocks. Further validation of AGREE is in progress for a whole reactor problem using the HTTR safety test data such as control rod withdrawal tests and loss-of-forced convection tests.

  15. System level approaches for mainstreaming tobacco control into existing health programs in India: Perspectives from the field

    Directory of Open Access Journals (Sweden)

    Rajmohan Panda

    2015-01-01

    Full Text Available Introduction: India is the second largest consumer of tobacco in the world, and varieties of both smoked and smokeless tobacco products are widely available. The national program for tobacco control is run like a vertical stand-alone program. There is a lack of understanding of existing opportunities and barriers within the health programs that influence the integration of tobacco control messages into them. The present formative research identifies such opportunities and barriers. Methods: We conducted a multi-step, mixed methodological study of primary care personnel and policy-makers in two Indian states of Andhra Pradesh and Gujarat. The primary purpose of our study was to investigate health worker and policy-maker perceptions on the integration of tobacco control intervention. We systematically collected data in three steps: In Step I, we conducted in-depth interviews (IDIs and focus group discussions with primary care health personnel, Step II consists of a quantitative survey among health care providers (n = 1457 to test knowledge, attitudes and practices in tobacco control and Step III we conducted 75 IDIs with program heads and policy-makers to evaluate the relative congruence of their views on integration of the tobacco control program. Results: Majority of the health care providers recognized tobacco use as a major health problem. There was a general consensus for the need of training for effective dissemination of information from health care providers to patients. Almost 92% of the respondents opined that integration of tobacco control with other health programs will be highly effective to downscale the tobacco epidemic. Conclusions: Our findings suggest the need for integration of tobacco control program into existing health programs. Integration of tobacco control strategies into the health care system within primary and secondary care will be more effective and counseling for tobacco cessation should be available for population

  16. Blood Pressure Control in Hypertensive Patients in the "Hiperdia Program": A Territory-Based Study

    Directory of Open Access Journals (Sweden)

    Clarita Silva de Souza

    2014-06-01

    Full Text Available Background: Systemic hypertension is highly prevalent and an important risk factor for cardiovascular events. Blood pressure control in hypertensive patients enrolled in the Hiperdia Program, a program of the Single Health System for the follow-up and monitoring of hypertensive patients, is still far below the desired level. Objective: To describe the epidemiological profile and to assess blood pressure control of patients enrolled in Hiperdia, in the city of Novo Hamburgo (State of Rio Grande do Sul, Brazil. Methods: Cross-sectional study with a stratified cluster random sample, including 383 adults enrolled in the Hiperdia Program of the 15 Basic Health Units of the city of Porto Alegre, conducted between 2010 and 2011. Controlled blood pressure was defined as ≤140 mmHg × 90 mmHg. The hypertensive patients were interviewed and their blood pressure was measured using a calibrated aneroid device. Prevalence ratios (PR with 95% confidence interval, Wald's χ2 test, and simple and multiple Poisson regression were used in the statistical analysis. Results: The mean age was 63 ± 10 years, and most of the patients were females belonging to social class C, with a low level of education, a sedentary lifestyle, and family history positive for systemic hypertension. Diabetes mellitus (DM was observed in 31%; adherence to the antihypertensive treatment in 54.3%; and 33.7% had their blood pressure controlled. DM was strongly associated with inadequate BP control, with only 15.7% of the diabetics showing BP considered as controlled. Conclusion: Even for hypertensive patients enrolled in the Hiperdia Program, BP control is not satisfactorily reached or sustained. Diabetic hypertensive patients show the most inappropriate BP control.

  17. Cancer Control Programs in East Asia: Evidence From the International Literature

    Directory of Open Access Journals (Sweden)

    Malcolm A. Moore

    2014-07-01

    Full Text Available Cancer is a major cause of mortality and morbidity throughout the world, including the countries of North-East and South-East Asia. Assessment of burden through cancer registration, determination of risk and protective factors, early detection and screening, clinical practice, interventions for example in vaccination, tobacco cessation efforts and palliative care all should be included in comprehensive cancer control programs. The degree to which this is possible naturally depends on the resources available at local, national and international levels. The present review concerns elements of cancer control programs established in China, Taiwan, Korea, and Japan in North-East Asia, Viet Nam, Thailand, Malaysia, and Indonesia as representative larger countries of South-East Asia for comparison, using the published literature as a guide. While major advances have been made, there are still areas which need more attention, especially in South-East Asia, and international cooperation is essential if standard guidelines are to be generated to allow effective cancer control efforts throughout the Far East.

  18. Risk Analysis of Loblolly Pine Controlled Mass Pollination Program

    Science.gov (United States)

    T.D. Byram; F.E. Bridgwater

    1999-01-01

    The economic success of controlled mass pollination (CMP) depends both upon the value of the genetic gain obtained and the cost per seed. Crossing the best six loblolly pine (Pinus taeda) parents currently available in each deployment region of the Western Gulf Forest Tree Improvement Program will produce seed with an average additional gain in mean...

  19. Programmed Control of Optical Grating Scales for Visual Research.

    Science.gov (United States)

    1980-12-01

    A -AOO .9 AIR FORCE INST OF TECH WRIGHT-PATTERSON AFB OH SCHOO--ETC F/6 14/2 PROGRAMMED CONTROL OF OPTI CAL GRATING SCALES FOR VISUAL RESEARC --ETC(fl...custom system for AMRL. The cost in memory parts alone was $40,000, a good indication that the market is not over-priced. Ca-? western Reserve

  20. [Impact of an educational institutional program in the control of the diabetic patient].

    Science.gov (United States)

    Mendoza-Romo, Miguel Angel; Velasco-Chávez, José Fernando; Nieva de Jesús, Rafael Natividad; Andrade-Rodríguez, Héctor de Jesús; Rodríguez-Pérez, Carlos Vicente; Palou-Fraga, Elizabeth

    2013-01-01

    to assess the impact of an educational institutional program in the control of type 2 diabetic patient. intervention educational study, with quasi-experimental and self-controlled subjects. A convenience non-probabilistic sample was used including 151 patients from the program for the integral care of diabetic patients. Demographic variables: gender, age, type of insurance, somatometric and metabolic profile. The assistance to a one-year length, educational program was necessary. Descriptive and inferential parametric statistics were used. 106 women and 45 men, with age range between 15 and 87 years, and with an average of 57.22 ± 11.47, were studied. A significant decrease in body mass index, waist circumference, venous glucose fasting and post-prandial values, cholesterol, systolic blood pressure, triglycerides and glycosylated hemoglobin (t Student semi-detached, p education for the control of the diabetic patient shown a favorable pattern in most of somatometric and metabolic parameters. We suggest to extend this study over a longer period to determine if the effects persist over time.

  1. Research and Development programs for HTGRs in JAERI

    Energy Technology Data Exchange (ETDEWEB)

    Nishiguchi, Isoharu; Saito, Sinzo [Department of HTTR Project, Japan Atomic Energy Research Institute (Japan)

    1990-07-01

    Since 1969, JAERI has conducted research and development (R and D) programs for High-Temperature Gas-Cooled Reactors (HTGR). And the High Temperature engineering Test Reactor (HTTR), which will be the first High Temperature Gas Cooled Reactor (HTGR) in Japan, is under licensing process now. In this paper, some of the results of R and D are outlined in the following fields which are closely connected with the HTTR design, that is: i) fuel; ii) nuclear design; iii) thermal-hydraulic design; iv) graphite structure and v) high temperature metal structure. In the field of fuel, extensive investigations have been performed to develop the fabrication technology of coated particle fuel (cpf). In parallel, data of coated fuel particle failure and fission product release in in- and ex-reactor experiments as well as mechanical properties data were obtained and irradiation tests have been done using the Oarai Gas Loop No.1 (OGL-1) to verify the integrity of mass-produced fuel. Concerning the nuclear design, critical experiments were conducted using the Very High-Temperature Reactor Critical Assembly (VHTRC). Also carried out were hydrodynamical and thermal experiments using the Helium Engineering Demonstration Loop (HENDEL). On the graphite structures which compose the reactor internals, design criteria have been developed based on ASME BandPV Code Section III Div.2, subsection CE and design data have been accumulated on a domestic graphite material. High temperature metal structure is also one of major subjects of R and D for HTGRs. Hastelloy XR, which is a modified version of Hastelloy X, was developed and various tests have been conducted which include creep tests, creep-fatigue tests, etc. to establish design criteria and allowables. Component tests of the Intermediate Heat Exchanger (IHX) have been also performed. (author)

  2. Research and Development programs for HTGRs in JAERI

    International Nuclear Information System (INIS)

    Nishiguchi, Isoharu; Saito, Sinzo

    1990-01-01

    Since 1969, JAERI has conducted research and development (R and D) programs for High-Temperature Gas-Cooled Reactors (HTGR). And the High Temperature engineering Test Reactor (HTTR), which will be the first High Temperature Gas Cooled Reactor (HTGR) in Japan, is under licensing process now. In this paper, some of the results of R and D are outlined in the following fields which are closely connected with the HTTR design, that is: i) fuel; ii) nuclear design; iii) thermal-hydraulic design; iv) graphite structure and v) high temperature metal structure. In the field of fuel, extensive investigations have been performed to develop the fabrication technology of coated particle fuel (cpf). In parallel, data of coated fuel particle failure and fission product release in in- and ex-reactor experiments as well as mechanical properties data were obtained and irradiation tests have been done using the Oarai Gas Loop No.1 (OGL-1) to verify the integrity of mass-produced fuel. Concerning the nuclear design, critical experiments were conducted using the Very High-Temperature Reactor Critical Assembly (VHTRC). Also carried out were hydrodynamical and thermal experiments using the Helium Engineering Demonstration Loop (HENDEL). On the graphite structures which compose the reactor internals, design criteria have been developed based on ASME BandPV Code Section III Div.2, subsection CE and design data have been accumulated on a domestic graphite material. High temperature metal structure is also one of major subjects of R and D for HTGRs. Hastelloy XR, which is a modified version of Hastelloy X, was developed and various tests have been conducted which include creep tests, creep-fatigue tests, etc. to establish design criteria and allowables. Component tests of the Intermediate Heat Exchanger (IHX) have been also performed. (author)

  3. Development of a Computer Program for the Integrated Control of the Fuel Homogeneity Measurement System

    International Nuclear Information System (INIS)

    Shin, H. S.; Jang, J. W.; Lee, Y. H.; Oh, S. J.; Park, H. D.; Kim, C. K.

    2005-11-01

    The computer program is developed based on Visual C++, which is equipped with a user-friendly interface of the input/output(I/O) and a display function for the measuring conditions. This program consists of three parts which are the port communication, PLC(Programmable Logic Controller) and the MCA(Multi Channel Analyzer) control parts. The communication type between the CPU of the PLC module box and the computer is selected as be the Rs-232 asynchronous type and the thread method is adapted in the development of the first part of the program. The PLC-related program has been developed so that the data communication between the PLC CPU and the computer could be harmonized with the unique commands which have already been defined in the PLC. The measuring space and time intervals, the start and end ROI(region of interest) values, and the allowable error limitation are input at each measurement in this program. Finally the controlling MCA program has been developed by using Canberra's programming library which contains several files including the head files in which the variable and the function of C++ are declared according to the MCA function. The performance test has been carried out through an application of the developed computer program to the homogeneity measurement system. The gamma counts at 28 measuring points of a fuel rod of 700 mm in length are measured for 50 sec at each point. It was revealed that the measurement results are better than the previous ones in respects of the measurement accuracy and a measurement time saving could be achieved. It was concluded that the gamma measurement system can be improved through equipping it with the developed control program

  4. A worksite prevention program for construction workers: Design of a randomized controlled trial

    NARCIS (Netherlands)

    Oude Hengel, K.M.; Joling, C.I.; Proper, K.I.; Blatter, B.M.; Bongers, P.M.

    2010-01-01

    Background. A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program

  5. Development of the Dutch Johne's disease control program supported by a simulation model

    NARCIS (Netherlands)

    Groenendaal, H.; Nielen, M.; Hesselink, J.W.

    2003-01-01

    The development of a simulation model, "JohneSSim", was part of a research program aimed at designing a national Johne's disease control program for The Netherlands. Initially, the focus was mainly directed towards different compulsory "test-and-cull" strategies. However, the results from the

  6. National control and eradication program of bovine tuberculosis in Chile.

    Science.gov (United States)

    Max, Vanessa; Paredes, Luis; Rivera, Alejandro; Ternicier, Claudio

    2011-07-05

    There have been reports of the presence of bovine tuberculosis (TB) in Chile for more than 100 years. Several prevalence studies have revealed that there is a wide spectrum of disease across the country with certain geographic areas where the disease is endemic through to other geographic areas where infection is sporadic and at very low prevalence. In 2009, this information was used to divide Chile into different geographic zones based on prevalence rates. This will enable the correct actions to be undertaken to reduce the prevalence of TB. Thus the northern part of Chile which has a medium to high prevalence of TB will be categorized as a control zone. In contrast, the southern part of Chile which has a high proportion of the bovine population, has a low prevalence of TB and will be classified as an eradication zone (Paredes, 2008). Although there have been several past attempts to create a national control and eradication program in Chile, none has been successful. A national program is proposed, and outlined in this paper. Progress toward program initiation in 2009 has been difficult, mostly because of the global economic crisis, difficulties in the milk and meat industry, and social and political issues. Copyright © 2011 Elsevier B.V. All rights reserved.

  7. A program for the numerical control of a pulse increment system

    Energy Technology Data Exchange (ETDEWEB)

    Gray, D.C.

    1963-08-21

    This report will describe the important features of the development of magnetic tapes for the numerical control of a pulse-increment system consisting of a modified Gorton lathe and its associated control unit developed by L. E. Foley of Equipment Development Service, Engineering Services, General Electric Co., Schenectady, N.Y. Included is a description of CUPID (Control and Utilization of Pulse Increment Devices), a FORTRAN program for the design of these tapes on the IBM 7090 computer, and instructions for its operation.

  8. Multiple educational programs improves glycemic control, quality of life with diminishing the impact of diabetes in poorly controlled type 1 diabetics.

    Science.gov (United States)

    Vyas, Chintan; Dalal, Lopa; Talaviya, Praful; Saboo, Banshi

    2017-12-01

    The aim of present study was to assess the outcomes of multiple educational programs on glycemic control, quality of life and impact of diabetes in poorly controlled Type 1 Diabetic patients. A 12 months diabetes education programs were conducted every week for first one month then followed by every 3 months with follow up on improvement of HbA1c and QOL in T1D patients (n=54). Clinical characteristics were recorded at baseline visit. The QOL was evaluated by 15 set DQOL questionnaires in 40 consecutive patients at baseline, 3, 6 and 12 months after education programs. The HbA1c level (%) was evaluated at same time point. Decrease in DQOL score was reported as improvement in QOL. The rate of patients response to educational programs was noted 74.07% (n=40) at end of the study (12 months). The prevalence of T1D was reported higher in men than in women. The overall DQOL score and HbA1c% level was significantly (Peducational programs. Patients exhibited greater satisfaction and diminished impact of diabetes after educational programs was observed after 3 months and it was continue up to end of study. The frequencies of self-monitoring of blood glucose were increased. Numbers of hypoglycemic and DKA events were decreased after educational programs when compared to baseline. Results of study revealed that the appropriate education and counseling diminish impact of diabetes, improve QOL and help to achieve desired glycemic (HbA1c) level in poorly control T1D patients. Copyright © 2017. Published by Elsevier Ltd.

  9. Stochastic Control of Energy Efficient Buildings: A Semidefinite Programming Approach

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Xiao [ORNL; Dong, Jin [ORNL; Djouadi, Seddik M [ORNL; Nutaro, James J [ORNL; Kuruganti, Teja [ORNL

    2015-01-01

    The key goal in energy efficient buildings is to reduce energy consumption of Heating, Ventilation, and Air- Conditioning (HVAC) systems while maintaining a comfortable temperature and humidity in the building. This paper proposes a novel stochastic control approach for achieving joint performance and power control of HVAC. We employ a constrained Stochastic Linear Quadratic Control (cSLQC) by minimizing a quadratic cost function with a disturbance assumed to be Gaussian. The problem is formulated to minimize the expected cost subject to a linear constraint and a probabilistic constraint. By using cSLQC, the problem is reduced to a semidefinite optimization problem, where the optimal control can be computed efficiently by Semidefinite programming (SDP). Simulation results are provided to demonstrate the effectiveness and power efficiency by utilizing the proposed control approach.

  10. Policy Gradient Adaptive Dynamic Programming for Data-Based Optimal Control.

    Science.gov (United States)

    Luo, Biao; Liu, Derong; Wu, Huai-Ning; Wang, Ding; Lewis, Frank L

    2017-10-01

    The model-free optimal control problem of general discrete-time nonlinear systems is considered in this paper, and a data-based policy gradient adaptive dynamic programming (PGADP) algorithm is developed to design an adaptive optimal controller method. By using offline and online data rather than the mathematical system model, the PGADP algorithm improves control policy with a gradient descent scheme. The convergence of the PGADP algorithm is proved by demonstrating that the constructed Q -function sequence converges to the optimal Q -function. Based on the PGADP algorithm, the adaptive control method is developed with an actor-critic structure and the method of weighted residuals. Its convergence properties are analyzed, where the approximate Q -function converges to its optimum. Computer simulation results demonstrate the effectiveness of the PGADP-based adaptive control method.

  11. Reducing Violence in Non-Controlling Ways: A Change Program Based on Self Determination Theory

    Science.gov (United States)

    Assor, Avi; Feinberg, Ofra; Kanat-Maymon, Yaniv; Kaplan, Haya

    2018-01-01

    This paper presents and examines the first school change program focusing on violence and caring based on self-determination theory (Deci & Ryan, 2012). The program aimed at promoting teachers' capacity to cope with violence and enhance caring without becoming more controlling. Comparisons of the effects of a 22-month-long program in three…

  12. The History and Use of Cancer Registry Data by Public Health Cancer Control Programs in the United States

    Science.gov (United States)

    White, Mary C.; Babcock, Frances; Hayes, Nikki S.; Mariotto, Angela B.; Wong, Faye L.; Kohler, Betsy A.; Weir, Hannah K.

    2018-01-01

    Because cancer registry data provide a census of cancer cases, registry data can be used to: 1) define and monitor cancer incidence at the local, state, and national levels; 2) investigate patterns of cancer treatment; and 3) evaluate the effectiveness of public health efforts to prevent cancer cases and improve cancer survival. The purpose of this article is to provide a broad overview of the history of cancer surveillance programs in the United States, and illustrate the expanding ways in which cancer surveillance data are being made available and contributing to cancer control programs. The article describes the building of the cancer registry infrastructure and the successful coordination of efforts among the 2 federal agencies that support cancer registry programs, the Centers for Disease Control and Prevention and the National Cancer Institute, and the North American Association of Central Cancer Registries. The major US cancer control programs also are described, including the National Comprehensive Cancer Control Program, the National Breast and Cervical Cancer Early Detection Program, and the Colorectal Cancer Control Program. This overview illustrates how cancer registry data can inform public health actions to reduce disparities in cancer outcomes and may be instructional for a variety of cancer control professionals in the United States and in other countries. PMID:29205307

  13. A Controlled Randomized Preliminary Trial of a Modified Dissonance-Based Eating Disorder Intervention Program.

    Science.gov (United States)

    Green, M A; Willis, M; Fernandez-Kong, K; Reyes, S; Linkhart, R; Johnson, M; Thorne, T; Lindberg, J; Kroska, E; Woodward, H

    2017-12-01

    We conducted a controlled randomized preliminary trial of a modified dissonance-based eating disorder program (n = 24) compared to an assessment-only control condition (n = 23) via a longitudinal design (baseline, postintervention, 2-month follow-up) in a community sample of women (N = 47) with clinical (n = 22) and subclinical (n = 25) eating disorder symptoms. The traditional content of the Body Project, a dissonance-based eating disorder prevention program, was modified to include verbal, written, and behavioral exercises designed to dissuade self-objectification and maladaptive social comparison. Women with clinical and subclinical symptoms were included in the target audience to investigate both the treatment and the indicated prevention utility of the modified dissonance program. Body dissatisfaction, self-esteem, self-objectification, thin-ideal internalization, maladaptive social comparison, trait anxiety, and eating disorder symptoms were evaluated in the control and the modified dissonance condition at baseline, postintervention, and 2-month follow-up. We predicted a statistically significant 2 (condition: control, modified dissonance) x 3 (time: baseline, postintervention, 2-month follow-up) interaction in the mixed factorial multivariate analyses of variance results. Results confirmed this hypothesis. Eating disorder risk factors and symptoms decreased significantly among participants in the modified dissonance condition at postintervention and 2-month follow-up compared to baseline; symptom improvement was greater among participants in the modified compared to the control condition. A secondary analysis indicated symptom improvement did not vary as a function of symptom status (clinical, subclinical), suggesting the program is efficacious in both indicated prevention and treatment applications. Results provide preliminary support for the modified dissonance program. © 2017 Wiley Periodicals, Inc.

  14. Sound Control-Flow Graph Extraction for Java Programs with Exceptions

    NARCIS (Netherlands)

    Amighi, A.; de Carvalho Gomes, Pedro; Gurov, Dilian; Huisman, Marieke; Eleftherakis, George; Hinchey, Mike; Holcombe, Mike

    2012-01-01

    We present an algorithm to extract control-flow graphs from Java bytecode, considering exceptional flows. We then establish its correctness: the behavior of the extracted graphs is shown to be a sound over-approximation of the behavior of the original programs. Thus, any temporal safety property

  15. Program for control and editing the output data of spiral reader

    International Nuclear Information System (INIS)

    Yamburenko, V.S.

    1983-01-01

    The program forming the magnetic tape with outpug data of Spiral Reader from that one containing initial data for computing on big computers is desribed. The program is controlled by ''operator-computer'' dialogue using the HT-340 display. During rewriting the data structure and quality are checked. Manual and automatic modes of rewriting are possible. The editing mode permits to create easily arrays of data of a given format. The magnetic tapes format and data structure are also described

  16. Risk Assessment on the Transition Program for Air Traffic Control Automation System Upgrade

    Directory of Open Access Journals (Sweden)

    Li Dong Bin

    2016-01-01

    Full Text Available We analyzed the safety risks of the transition program for Air Traffic Control (ATC automation system upgrade by using the event tree analysis method in this paper. We decomposed the occurrence progress of the three transition phase and built the event trees corresponding to the three stages, and then we determined the probability of success of each factor and calculated probability of success of the air traffic control automation system upgrade transition. In the conclusion, we illustrate the transition program safety risk according to the results.

  17. Cohort Study of the Success of Controlled Weight Loss Programs for Obese Dogs.

    Science.gov (United States)

    German, A J; Titcomb, J M; Holden, S L; Queau, Y; Morris, P J; Biourge, V

    2015-01-01

    Most weight loss studies in obese dogs assess rate and percentage of weight loss in the first 2-3 months, rather than the likelihood of successfully reaching target weight. To determine outcome of controlled weight loss programs for obese dogs, and to determine the factors associated with successful completion. 143 obese dogs undergoing a controlled weight loss program. This was a cohort study of obese dogs attending a referral weight management clinic. Dogs were studied during their period of weight loss, and cases classified according to outcome as "completed" (reached target weight), "euthanized" (was euthanized before reaching target weight), or "stopped prematurely" (program stopped early for other reasons). Factors associated with successful completion were assessed using simple and multiple logistic regression. 87/143 dogs (61%) completed their weight loss program, 11 [8%] died or were euthanized, and the remaining 45 [32%] stopped prematurely. Reasons for dogs stopping prematurely included inability to contact owner, refusal to comply with weight management advice, or development of another illness. Successful weight loss was positively associated with a faster rate (P obese dogs on a controlled weight loss program reach their target weight. Future studies should better clarify reasons for success in individual cases, and also the role of factors such as activity and behavioral modification. Copyright © 2015 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

  18. CONTROL: the run control program used on the WA62 VAX data acquisition system at CERN

    International Nuclear Information System (INIS)

    Hand, R.P.

    1980-11-01

    The criteria are described which have been used in the design of CONTROL, a program in the WA62 VAX Native mode data acquisition system which serves the triple purpose of driving a status display, an operator's console and a message reporter. (U.K.)

  19. Utilisation of the egg-larval parasitoid, Fopius (Biosteres) arisanus, for augmentative biological control of tephritid fruit flies

    International Nuclear Information System (INIS)

    Harris, Ernest J.; Bautista, Renato C.; Spencer, John P.

    2000-01-01

    In Hawaii, entomologists concerned about tephritid fruit fly control recognise and accept the fact that the introduction of tephritid fruit flies consisting of the melon fly Bactrocera cucurbitae (Coquillet), Mediterranean fruit fly, C. capitata (Wiedemann), Oriental fruit fly, B. dorsalis (Hendel) and the Solanaceous fruit fly, B. latifrons (Hendel) required the introduction of many species of parasitoids into Hawaii (Clausen 1956) to reduce crop damage caused by tephritid fruit flies. The parasitoids established in the order of their succession were Diachasimorpha longicaudata (Ashmead), Biosteres vandenboschi (Fullaway), and Fopius (Biosteres) arisanus (Sonan). F. arisanus was first discovered in Hawaii in 1949 in a guava fruit collection (van den Bosch and Haramoto 1951). In 1950, the rate of parasitism caused F. arisanus to increase and this insect spread and became the dominant and most widely distributed parasitoid in Hawaii (Haramoto and Bess 1970). Entomologists investigating fruit fly ecology in Hawaii recognised that the four species of tephritid fruit flies differ in their distribution, abundance and host utilisation patterns in different habitats. The rapid spread and distribution of F. arisanus in Hawaii indicated the reality that among the parasitoids, F. arisanus has the highest adaptation capabilities in the Hawaiian ecosystem comparable to that of B. dorsalis and C. capitata, the most persistent fruit fly species in Hawaii. A strategy receiving high priority to improve biological control of tephritid fruit flies is foreign exploration to find new parasitoids for introduction into tephritid fruit fly invested areas including Guatemala and Hawaii. It is possible another species comparable to F. arisanus might be found. New introductions could increase the diversity of parasitoid species and result in the introduction of species more efficient for suppressing B. latifrons in Hawaii. The cost of parasitoid exploration is very expensive, US$100,000 or

  20. DCS-Neural-Network Program for Aircraft Control and Testing

    Science.gov (United States)

    Jorgensen, Charles C.

    2006-01-01

    A computer program implements a dynamic-cell-structure (DCS) artificial neural network that can perform such tasks as learning selected aerodynamic characteristics of an airplane from wind-tunnel test data and computing real-time stability and control derivatives of the airplane for use in feedback linearized control. A DCS neural network is one of several types of neural networks that can incorporate additional nodes in order to rapidly learn increasingly complex relationships between inputs and outputs. In the DCS neural network implemented by the present program, the insertion of nodes is based on accumulated error. A competitive Hebbian learning rule (a supervised-learning rule in which connection weights are adjusted to minimize differences between actual and desired outputs for training examples) is used. A Kohonen-style learning rule (derived from a relatively simple training algorithm, implements a Delaunay triangulation layout of neurons) is used to adjust node positions during training. Neighborhood topology determines which nodes are used to estimate new values. The network learns, starting with two nodes, and adds new nodes sequentially in locations chosen to maximize reductions in global error. At any given time during learning, the error becomes homogeneously distributed over all nodes.

  1. [Resource allocation analysis for international cooperation program for HIV/AIDS prevention and control].

    Science.gov (United States)

    Li, Hui; Xue, Hui; Liu, Hui; Guo, Hao-yan; Zhang, Hua; Sun, Jiang-ping

    2008-12-01

    To provide evidence for resource allocation and cooperation between domestic and international HIV/AIDS programs in China by analyzing the needs and current levels of resource input in provinces. National and provincial international cooperation program investment and allocation data from 2000 to 2006 were collected. Several factors in each province were analyzed through multiple regression analysis in order to determine whether they had a statistical correlation to the distribution of international HIV/AIDS program resources in China, including: the Gross Domestic Product (GDP), the number of accumulated people living with HIV/AIDS, and the number of accumulated people living with AIDS. Then the Z values were calculated at each provincial level and compared with related international investment. The resource allocation in different program areas were compared with the level of resource input by international and central government HIV/AIDS prevention and control programs through Chi-square test. The international cooperation program investment at local level from 2000 to 2006 were 4893, 24 669, 50 567, 52 950, 112 143, 363 396 and 247 045 thousand RMB respectively, and at national level were 3007, 19 726, 29 035, 37 530, 77 500, 105 786 and 77 035 thousand RMB respectively. There was a statistical correlation between international HIV/AIDS program resource input and the accumulated number of people living with AIDS (R is 0.56 and 0.69 accordingly, and P international resource input and the GDP of each province. International HIV/AIDS cooperation programs did not invest in each province according to its practical needs (R = 0.066, P = 0.725). The international cooperation program investments and needs in different province could not meet completely. The ranks of Z value in Guangdong, Shandong and Jiangsu were 3, 5 and 6, but the ranks of international cooperation program in those provinces were 18, 13 and 28 respectively. The investment proportion for national

  2. Liquefied gaseous fuels safety and environmental control assessment program: third status report

    Energy Technology Data Exchange (ETDEWEB)

    1982-03-01

    This Status Report contains contributions from all contractors currently participating in the DOE Liquefied Gaseous Fuels (LG) Safety and Environmental Control Assessment Program and is presented in two principal sections. Section I is an Executive Summary of work done by all program participants. Section II is a presentation of fourteen individual reports (A through N) on specific LGF Program activities. The emphasis of Section II is on research conducted by Lawrence Livermore National Laboratory (Reports A through M). Report N, an annotated bibliography of literature related to LNG safety and environmental control, was prepared by Pacific Northwest Laboratory (PNL) as part of its LGF Safety Studies Project. Other organizations who contributed to this Status Report are Aerojet Energy Conversion Company; Applied Technology Corporation; Arthur D. Little, Incorporated; C/sub v/ International, Incorporated; Institute of Gas Technology; and Massachusetts Institute of Technology. Separate abstracts have been prepared for Reports A through N for inclusion in the Energy Data Base.

  3. Development and demonstration program for dynamic nuclear materials control

    International Nuclear Information System (INIS)

    Augustson, R.H.; Baron, N.; Ford, R.F.; Ford, W.; Hagen, J.; Li, T.K.; Marshall, R.S.; Reams, V.S.; Severe, W.R.; Shirk, D.G.

    1978-01-01

    A significant portion of the Los Alamos Scientific Laboratory Safeguards Program is directed toward the development and demonstration of dynamic nuclear materials control. The building chosen for the demonstration system is the new Plutonium Processing Facility in Los Alamos, which houses such operations as metal-to-oxide conversion, fuel pellet fabrication, and scrap recovery. A DYnamic MAterials Control (DYMAC) system is currently being installed in the facility as an integral part of the processing operation. DYMAC is structured around interlocking unit-process accounting areas. It relies heavily on nondestructive assay measurements made in the process line to draw dynamic material balances in near real time. In conjunction with the nondestructive assay instrumentation, process operators use interactive terminals to transmit additional accounting and process information to a dedicated computer. The computer verifies and organizes the incoming data, immediately updates the inventory records, monitors material in transit using elapsed time, and alerts the Nuclear Materials Officer in the event that material balances exceed the predetermined action limits. DYMAC is part of the United States safeguards system under control of the facility operator. Because of its advanced features, the system will present a new set of inspection conditions to the IAEA, whose response is the subject of a study being sponsored by the US-IAEA Technical Assistance Program. The central issue is how the IAEA can use the increased capabilities of such a system and still maintain independent verification

  4. Explicit/multi-parametric model predictive control (MPC) of linear discrete-time systems by dynamic and multi-parametric programming

    KAUST Repository

    Kouramas, K.I.

    2011-08-01

    This work presents a new algorithm for solving the explicit/multi- parametric model predictive control (or mp-MPC) problem for linear, time-invariant discrete-time systems, based on dynamic programming and multi-parametric programming techniques. The algorithm features two key steps: (i) a dynamic programming step, in which the mp-MPC problem is decomposed into a set of smaller subproblems in which only the current control, state variables, and constraints are considered, and (ii) a multi-parametric programming step, in which each subproblem is solved as a convex multi-parametric programming problem, to derive the control variables as an explicit function of the states. The key feature of the proposed method is that it overcomes potential limitations of previous methods for solving multi-parametric programming problems with dynamic programming, such as the need for global optimization for each subproblem of the dynamic programming step. © 2011 Elsevier Ltd. All rights reserved.

  5. Design Challenges Encountered in a Propulsion-Controlled Aircraft Flight Test Program

    Science.gov (United States)

    Maine, Trindel; Burken, John; Burcham, Frank; Schaefer, Peter

    1994-01-01

    The NASA Dryden Flight Research Center conducted flight tests of a propulsion-controlled aircraft system on an F-15 airplane. This system was designed to explore the feasibility of providing safe emergency landing capability using only the engines to provide flight control in the event of a catastrophic loss of conventional flight controls. Control laws were designed to control the flightpath and bank angle using only commands to the throttles. Although the program was highly successful, this paper highlights some of the challenges associated with using engine thrust as a control effector. These challenges include slow engine response time, poorly modeled nonlinear engine dynamics, unmodeled inlet-airframe interactions, and difficulties with ground effect and gust rejection. Flight and simulation data illustrate these difficulties.

  6. Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review.

    Science.gov (United States)

    Perraton, Luke; Machotka, Zuzana; Kumar, Saravana

    2009-11-30

    Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS). The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials. A systematic review of randomized controlled trials was conducted. Only trials that have reported significant FMS-related outcomes were included. Data relating to the components of hydrotherapy programs (exercise type, duration, frequency and intensity, environmental factors, and service delivery) were analyzed. Eleven randomized controlled trials were included in this review. Overall, the quality of trials was good. Aerobic exercise featured in all 11 trials and the majority of hydrotherapy programs included either a strengthening or flexibility component. Great variability was noted in both the environmental components of hydrotherapy programs and service delivery. Aerobic exercise, warm up and cool-down periods and relaxation exercises are common features of hydrotherapy programs that report significant FMS-related outcomes. Treatment duration of 60 minutes, frequency of three sessions per week and an intensity equivalent to 60%-80% maximum heart rate were the most commonly reported exercise components. Exercise appears to be the most important component of an effective hydrotherapy program for FMS, particularly when considering mental health-related outcomes.

  7. Diesel Emission Control -- Sulfur Effects (DECSE) Program; Phase I Interim Data Report No. 1

    Energy Technology Data Exchange (ETDEWEB)

    DOE; ORNL; NREL; EMA; MECA

    1999-08-15

    The Diesel Emission Control-Sulfur Effects (DECSE) is a joint government/industry program to determine the impact of diesel fuel sulfur levels on emission control systems whose use could lower emissions of nitrogen oxides (NO{sub x}) and particulate matter (PM) from on-highway trucks in the 2002--2004 model years. Phase 1 of the program was developed with the following objectives in mind: (1) evaluate the effects of varying the level of sulfur content in the fuel on the emission reduction performance of four emission control technologies; and (2) measure and compare the effects of up to 250 hours of aging on selected devices for multiple levels of fuel sulfur content. This interim data report summarizes results as of August, 1999, on the status of the test programs being conducted on three technologies: lean-NO{sub x} catalysts, diesel particulate filters and diesel oxidation catalysts.

  8. Development and implementation of an automated quantitative film digitizer quality control program

    Science.gov (United States)

    Fetterly, Kenneth A.; Avula, Ramesh T. V.; Hangiandreou, Nicholas J.

    1999-05-01

    A semi-automated, quantitative film digitizer quality control program that is based on the computer analysis of the image data from a single digitized test film was developed. This program includes measurements of the geometric accuracy, optical density performance, signal to noise ratio, and presampled modulation transfer function. The variability of the measurements was less than plus or minus 5%. Measurements were made on a group of two clinical and two laboratory laser film digitizers during a trial period of approximately four months. Quality control limits were established based on clinical necessity, vendor specifications and digitizer performance. During the trial period, one of the digitizers failed the performance requirements and was corrected by calibration.

  9. Air Breathing Propulsion Controls and Diagnostics Research at NASA Glenn Under NASA Aeronautics Research Mission Programs

    Science.gov (United States)

    Garg, Sanjay

    2015-01-01

    The Intelligent Control and Autonomy Branch (ICA) at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet the goals of the NASA Aeronautics Research Mission Directorate (ARMD) Programs. These efforts are primarily under the various projects under the Advanced Air Vehicles Program (AAVP), Airspace Operations and Safety Program (AOSP) and Transformative Aeronautics Concepts Program (TAC). The ICA Branch is focused on advancing the state-of-the-art of aero-engine control and diagnostics technologies to help improve aviation safety, increase efficiency, and enable operation with reduced emissions. This paper describes the various ICA research efforts under the NASA Aeronautics Research Mission Programs with a summary of motivation, background, technical approach, and recent accomplishments for each of the research tasks.

  10. Implementing preventive chemotherapy through an integrated National Neglected Tropical Disease Control Program in Mali.

    Directory of Open Access Journals (Sweden)

    Massitan Dembélé

    Full Text Available BACKGROUND: Mali is endemic for all five targeted major neglected tropical diseases (NTDs. As one of the five 'fast-track' countries supported with the United States Agency for International Development (USAID funds, Mali started to integrate the activities of existing disease-specific national control programs on these diseases in 2007. The ultimate objectives are to eliminate lymphatic filariasis, onchocerciasis and trachoma as public health problems and to reduce morbidity caused by schistosomiasis and soil-transmitted helminthiasis through regular treatment to eligible populations, and the specific objectives were to achieve 80% program coverage and 100% geographical coverage yearly. The paper reports on the implementation of the integrated mass drug administration and the lessons learned. METHODOLOGY/PRINCIPAL FINDINGS: The integrated control program was led by the Ministry of Health and coordinated by the national NTD Control Program. The drug packages were designed according to the disease endemicity in each district and delivered through various platforms to eligible populations involving the primary health care system. Treatment data were recorded and reported by the community drug distributors. After a pilot implementation of integrated drug delivery in three regions in 2007, the treatment for all five targeted NTDs was steadily scaled up to 100% geographical coverage by 2009, and program coverage has since been maintained at a high level: over 85% for lymphatic filariasis, over 90% for onchocerciasis and soil-transmitted helminthiasis, around 90% in school-age children for schistosomiasis, and 76-97% for trachoma. Around 10 million people have received one or more drug packages each year since 2009. No severe cases of adverse effects were reported. CONCLUSIONS/SIGNIFICANCE: Mali has scaled up the drug treatment to national coverage through integrated drug delivery involving the primary health care system. The successes and lessons

  11. An appraisal of oak wilt control programs in Pennsylvania and West Virginia

    Science.gov (United States)

    Thomas W. Jones; Thomas W. Jones

    1971-01-01

    Attempts to control oak wilt, ranging from relatively smallscale experiments to statewide programs, have been made in many States. Among the few currently active, those of Pennsylvania and West Virginia are notable for their size and duration. The pest-control organizations of the Pennsylvania Department of Agriculture and the West Virginia Department of Agriculture...

  12. Programming for controlling of pulse radiolysis setup. Program RADIO96

    International Nuclear Information System (INIS)

    Mirkowski, J.; Grodkowski, J.

    1998-01-01

    Program RADIO96 was written in Pascal using DELPHI 1.0 (Borland) programming platform. It can operate on IBM PC compatible computers in WINDOWS 3x or WINDOWS'95 environment. The program is dedicated to the pulse radiolysis setup based on the linear electron accelerator LAE 13/9 of the Department of Radiation Chemistry and Technology of the INCT. This work was based on apparatus and results described before and also on programming manuals of used equipment and technical data of programming platform. (author)

  13. Gynecologic Cancer Prevention and Control in the National Comprehensive Cancer Control Program: Progress, Current Activities, and Future Directions

    OpenAIRE

    Stewart, Sherri L.; Lakhani, Naheed; Brown, Phaeydra M.; Larkin, O. Ann; Moore, Angela R.; Hayes, Nikki S.

    2013-01-01

    Gynecologic cancer confers a large burden among women in the United States. Several evidence-based interventions are available to reduce the incidence, morbidity, and mortality from these cancers. The National Comprehensive Cancer Control Program (NCCCP) is uniquely positioned to implement these interventions in the US population. This review discusses progress and future directions for the NCCCP in preventing and controlling gynecologic cancer.

  14. Gynecologic cancer prevention and control in the National Comprehensive Cancer Control Program: progress, current activities, and future directions.

    Science.gov (United States)

    Stewart, Sherri L; Lakhani, Naheed; Brown, Phaeydra M; Larkin, O Ann; Moore, Angela R; Hayes, Nikki S

    2013-08-01

    Gynecologic cancer confers a large burden among women in the United States. Several evidence-based interventions are available to reduce the incidence, morbidity, and mortality from these cancers. The National Comprehensive Cancer Control Program (NCCCP) is uniquely positioned to implement these interventions in the US population. This review discusses progress and future directions for the NCCCP in preventing and controlling gynecologic cancer.

  15. Computerization aspects of the Health Physics' Radiation Control Program at Argonne National Laboratory

    International Nuclear Information System (INIS)

    Dolecek, Elwyn H.

    1978-01-01

    Greater public awareness of the potential hazards of ionizing radiation and the more stringent governmental compliance programs have made accountability of radioactive materials an item of increasingly major concern for all radionuclide users. For low-volume (radioisotopically) organizations, manual record keeping techniques may suffice without requiring significant work-hour allocations. When considering high-volume users, the workload contingent with manual inventory is usually excessive from an employee time-allocation standpoint. Therefore, various automation systems are employed, usually with the aid of an in-house or time-purchase computer system. The computer programs developed for these systems often do not allow for future modification without major rewriting. Therefore, to facilitate in program concept, modification, and implementation the Health Physics Section at Argonne National Laboratory chose to design and code its computer program(s) and has instituted a Radiation Administrative Program (RAP) as a major component of the Section's laboratory-wide radiation control program. Coded in ANSI PL/I, RAP provides both flexibility in present concept and allowance for future growth. It requires less than 300K words of computer memory and can be easily incorporated at other organizations with minimal modifications. The modular design provides run cost benefits and versatility of report generation and modification. Through the use of this type of information processing and retrieval system, one can manipulate large amounts of radionuclide data, providing control and identification, while still maintaining commitment of computer costs and employee time at a reasonable level. (author)

  16. Fundamental attributes of a practical configuration management program for nuclear plant design control

    International Nuclear Information System (INIS)

    Klein, S.M.

    1988-06-01

    This summarizes the results of an evaluation of findings identifies during a number of Safety-System Functional Inspections and Safety System Outage Modification Inspections which are related to configuration management for nuclear plant design control. A computerized database of these findings was generated from a review of the design inspection reports. Based on the results of the evaluation, attributes of a configuration management program were developed which are responsive to minimizing these types of inspection findings. Incorporation of these key attributes is considered good practice in the development of a configuration management program for design control at operating nuclear plants

  17. A two-step method for developing a control rod program for boiling water reactors

    International Nuclear Information System (INIS)

    Taner, M.S.; Levine, S.H.; Hsiao, M.Y.

    1992-01-01

    This paper reports on a two-step method that is established for the generation of a long-term control rod program for boiling water reactors (BWRs). The new method assumes a time-variant target power distribution in core depletion. In the new method, the BWR control rod programming is divided into two steps. In step 1, a sequence of optimal, exposure-dependent Haling power distribution profiles is generated, utilizing the spectral shift concept. In step 2, a set of exposure-dependent control rod patterns is developed by using the Haling profiles generated at step 1 as a target. The new method is implemented in a computer program named OCTOPUS. The optimization procedure of OCTOPUS is based on the method of approximation programming, in which the SIMULATE-E code is used to determine the nucleonics characteristics of the reactor core state. In a test in cycle length over a time-invariant, target Haling power distribution case because of a moderate application of spectral shift. No thermal limits of the core were violated. The gain in cycle length could be increased further by broadening the extent of the spetral shift

  18. The Alzheimer's Association external quality control program for cerebrospinal fluid biomarkers

    DEFF Research Database (Denmark)

    Mattsson, Niklas; Andreasson, Ulf; Persson, Staffan

    2011-01-01

    . The Alzheimer's Association has initiated a global quality control program to estimate and monitor variability of measurements, quantify batch-to-batch assay variations, and identify sources of variability. In this article, we present the results from the first two rounds of the program.......The cerebrospinal fluid (CSF) biomarkers amyloid β (Aβ)-42, total-tau (T-tau), and phosphorylated-tau (P-tau) demonstrate good diagnostic accuracy for Alzheimer's disease (AD). However, there are large variations in biomarker measurements between studies, and between and within laboratories...

  19. Adaptive dynamic programming with applications in optimal control

    CERN Document Server

    Liu, Derong; Wang, Ding; Yang, Xiong; Li, Hongliang

    2017-01-01

    This book covers the most recent developments in adaptive dynamic programming (ADP). The text begins with a thorough background review of ADP making sure that readers are sufficiently familiar with the fundamentals. In the core of the book, the authors address first discrete- and then continuous-time systems. Coverage of discrete-time systems starts with a more general form of value iteration to demonstrate its convergence, optimality, and stability with complete and thorough theoretical analysis. A more realistic form of value iteration is studied where value function approximations are assumed to have finite errors. Adaptive Dynamic Programming also details another avenue of the ADP approach: policy iteration. Both basic and generalized forms of policy-iteration-based ADP are studied with complete and thorough theoretical analysis in terms of convergence, optimality, stability, and error bounds. Among continuous-time systems, the control of affine and nonaffine nonlinear systems is studied using the ADP app...

  20. A multi-site controlled trial of a cognitive skills program for mentally disordered offenders.

    Science.gov (United States)

    Rees-Jones, Angharad; Gudjonsson, Gisli; Young, Susan

    2012-05-18

    The effectiveness of offending behaviour programs in forensic mental health settings is not well established. Thus this study aimed to evaluate the Reasoning and Rehabilitation Mental Health program (R&R2 MHP) among a mentally disordered offender (MDO) population. A sample of 121 adult males drawn from 10 forensic mental health sites completed questionnaires at baseline and post-treatment to assess violent attitudes, locus of control, social problem-solving and anger. An informant measure of social and psychological functioning, including disruptive behaviour, was completed by unit staff at the same time. At three month follow-up patients completed again the violent attitudes and locus of control questionnaires. The data of 67 patients who participated in the group condition were compared with 54 waiting-list controls who received treatment as usual. 78% of group participants completed the program. In contrast to controls, significant treatment effects were found at outcome on self-reported measures of violent attitudes, rational problem-solving and anger cognitions. Improvements were endorsed by informant ratings of social and psychological functioning within the establishments. At follow-up significant treatment effects were found for both violent attitudes and locus of control. R&R2 MHP was effective in a sample of MDOs and had a comparatively low drop-out rate. Future research should use a randomized controlled design.

  1. A multi-site controlled trial of a cognitive skills program for mentally disordered offenders

    Directory of Open Access Journals (Sweden)

    Rees-Jones Angharad

    2012-05-01

    Full Text Available Abstract Background The effectiveness of offending behaviour programs in forensic mental health settings is not well established. Thus this study aimed to evaluate the Reasoning and Rehabilitation Mental Health program (R&R2 MHP among a mentally disordered offender (MDO population. Methods A sample of 121 adult males drawn from 10 forensic mental health sites completed questionnaires at baseline and post-treatment to assess violent attitudes, locus of control, social problem-solving and anger. An informant measure of social and psychological functioning, including disruptive behaviour, was completed by unit staff at the same time. At three month follow-up patients completed again the violent attitudes and locus of control questionnaires. The data of 67 patients who participated in the group condition were compared with 54 waiting-list controls who received treatment as usual. Results 78% of group participants completed the program. In contrast to controls, significant treatment effects were found at outcome on self-reported measures of violent attitudes, rational problem-solving and anger cognitions. Improvements were endorsed by informant ratings of social and psychological functioning within the establishments. At follow-up significant treatment effects were found for both violent attitudes and locus of control. Conclusions R&R2 MHP was effective in a sample of MDOs and had a comparatively low drop-out rate. Future research should use a randomized controlled design.

  2. Optimal traffic control in highway transportation networks using linear programming

    KAUST Repository

    Li, Yanning

    2014-06-01

    This article presents a framework for the optimal control of boundary flows on transportation networks. The state of the system is modeled by a first order scalar conservation law (Lighthill-Whitham-Richards PDE). Based on an equivalent formulation of the Hamilton-Jacobi PDE, the problem of controlling the state of the system on a network link in a finite horizon can be posed as a Linear Program. Assuming all intersections in the network are controllable, we show that the optimization approach can be extended to an arbitrary transportation network, preserving linear constraints. Unlike previously investigated transportation network control schemes, this framework leverages the intrinsic properties of the Halmilton-Jacobi equation, and does not require any discretization or boolean variables on the link. Hence this framework is very computational efficient and provides the globally optimal solution. The feasibility of this framework is illustrated by an on-ramp metering control example.

  3. The Gap between the Knowledge and Current Practices--A Case of Tobacco Control Programs in Croatia.

    Science.gov (United States)

    Civljak, Marta; Tudor Car, Lorainne; Skara, Silvana; Oresković, Stipe

    2015-09-01

    Despite the availability of numerous evidence-based smoking prevention and cessation programs, many countries are still not implementing these research-proven programs. The primary aim of this paper is to summarize the extent to which evidence-based smoking control programs have been implemented in Croatia over the last two decades. Data from the systematic reviews of the Cochrane Tobacco Addiction Group, which are readily available worldwide, were used as criteria to evaluate whether effective, evidence-based programs have been implemented in Croatia. According to our findings, the most effective behavioral and pharmacological smoking cessation interventions have thus far been underutilized in Croatia. In addition, some interventions that have been continuously implemented in Croatia--such as using self-help materials, school-based programs and the celebration of World No Tobacco Day--have only small, short-term beneficial effects according to the Cochrane reviews. However, Croatia is a party to the World health Organization Framework Convention on Tobacco Control and therefore has effective national legislation on tobacco control. Croatia should develop and implement programs that integrate the existing high-quality empirical evidence on the effectiveness of various behavioral, pharmacological, and social interventions for smoking prevention and cessation. This programming should become a part of a continuous national strategy, and should be implemented throughout all of Croatia.

  4. Material protection control and accounting program activities at the Urals electrochemical integrated plant

    International Nuclear Information System (INIS)

    McAllister, S.

    1997-01-01

    The Urals Electrochemical Integrated Plant (UEIP) is the Russian Federation's largest uranium enrichment plant and one of three sites in Russia blending high enriched uranium (HEU) into commercial grade low enriched uranium. UEIP is located approximately 70 km north of Yekaterinburg in the closed city of Novouralsk (formerly Sverdlovsk- 44). DOE's MPC ampersand A program first met with UEIP in June of 1996, however because of some contractual issues the work did not start until September of 1997. The six national laboratories participating in DOE's Material Protection Control and Accounting program are cooperating with UEIP to enhance the capabilities of the physical protection, access control, and nuclear material control and accounting systems. The MPC ampersand A work at UEIP is expected to be completed during fiscal year 2001

  5. The Results of a Randomized Control Trial Evaluation of the SPARK Literacy Program

    Science.gov (United States)

    Jones, Curtis J.; Christian, Michael; Rice, Andrew

    2016-01-01

    The purpose of this report is to present the results of a two-year randomized control trial evaluation of the SPARK literacy program. SPARK is an early grade literacy program developed by Boys & Girls Clubs of Greater Milwaukee. In 2010, SPARK was awarded an Investing in Innovation (i3) Department of Education grant to further develop the…

  6. Air-Breathing Hypersonic Vehicle Tracking Control Based on Adaptive Dynamic Programming.

    Science.gov (United States)

    Mu, Chaoxu; Ni, Zhen; Sun, Changyin; He, Haibo

    2017-03-01

    In this paper, we propose a data-driven supplementary control approach with adaptive learning capability for air-breathing hypersonic vehicle tracking control based on action-dependent heuristic dynamic programming (ADHDP). The control action is generated by the combination of sliding mode control (SMC) and the ADHDP controller to track the desired velocity and the desired altitude. In particular, the ADHDP controller observes the differences between the actual velocity/altitude and the desired velocity/altitude, and then provides a supplementary control action accordingly. The ADHDP controller does not rely on the accurate mathematical model function and is data driven. Meanwhile, it is capable to adjust its parameters online over time under various working conditions, which is very suitable for hypersonic vehicle system with parameter uncertainties and disturbances. We verify the adaptive supplementary control approach versus the traditional SMC in the cruising flight, and provide three simulation studies to illustrate the improved performance with the proposed approach.

  7. Availability of tobacco cessation services in substance use disorder treatment programs: Impact of state tobacco control policy.

    Science.gov (United States)

    Abraham, Amanda J; Bagwell-Adams, Grace; Jayawardhana, Jayani

    2017-08-01

    Given the high prevalence of smoking among substance use disorder (SUD) patients, the specialty SUD treatment system is an important target for adoption and implementation of tobacco cessation (TC) services. While research has addressed the impact of tobacco control on individual tobacco consumption, largely overlooked in the literature is the potential impact of state tobacco control policies on availability of services for tobacco cessation. This paper examines the association between state tobacco control policy and availability of TC services in SUD treatment programs in the United States. State tobacco control and state demographic data (n=51) were merged with treatment program data from the 2012 National Survey of Substance Abuse Treatment Services (n=10.413) to examine availability of TC screening, counseling and pharmacotherapy services in SUD treatment programs using multivariate logistic regression models clustered at the state-level. Approximately 60% of SUD treatment programs offered TC screening services, 41% offered TC counseling services and 26% offered TC pharmacotherapy services. Results of multivariate logistic regression showed the odds of offering TC services were greater for SUD treatment programs located in states with higher cigarette excise taxes and greater spending on tobacco prevention and control. Findings indicate cigarette excise taxes and recommended funding levels may be effective policy tools for increasing access to TC services in SUD treatment programs. Coupled with changes to insurance coverage for TC under the Affordable Care Act, state tobacco control policy tools may further reduce tobacco use in the United States. Published by Elsevier Ltd.

  8. Effectiveness of Comprehensive Tobacco Control Programs in Reducing Teenage Smoking: A Review

    OpenAIRE

    Wakefield, Melanie A PhD; Chaloupka, Frank J. PhD

    1999-01-01

    This review focuses on the extent to which comprehensive, statewide, tobacco control programs in the United States have induced change in teenage smoking or made progress towards this goal and under what circumstances such programs are likely to be most effective. The sources for this review include published journal articles, reports and documents, rather than any primary data analysis. We review evidence for the extent to which individual strategies that comprise a comprehensive tobacco con...

  9. A Recourse-Based Type-2 Fuzzy Programming Method for Water Pollution Control under Uncertainty

    Directory of Open Access Journals (Sweden)

    Jing Liu

    2017-11-01

    Full Text Available In this study, a recourse-based type-2 fuzzy programming (RTFP method is developed for supporting water pollution control of basin systems under uncertainty. The RTFP method incorporates type-2 fuzzy programming (TFP within a two-stage stochastic programming with recourse (TSP framework to handle uncertainties expressed as type-2 fuzzy sets (i.e., a fuzzy set in which the membership function is also fuzzy and probability distributions, as well as to reflect the trade-offs between conflicting economic benefits and penalties due to violated policies. The RTFP method is then applied to a real case of water pollution control in the Heshui River Basin (a rural area of China, where chemical oxygen demand (COD, total nitrogen (TN, total phosphorus (TP, and soil loss are selected as major indicators to identify the water pollution control strategies. Solutions of optimal production plans of economic activities under each probabilistic pollutant discharge allowance level and membership grades are obtained. The results are helpful for the authorities in exploring the trade-off between economic objective and pollutant discharge decision-making based on river water pollution control.

  10. The role of nutrition in integrated programs to control neglected tropical diseases

    Directory of Open Access Journals (Sweden)

    Hall Andrew

    2012-04-01

    Full Text Available Abstract There are strong and direct relationships between undernutrition and the disease caused by infectious organisms, including the diverse pathogens labeled as neglected tropical diseases (NTDs. Undernutrition increases the risk of infection, the severity of disease and the risk that children will die, while the physical damage, loss of appetite, and host responses during chronic infection can contribute substantially to undernutrition. These relationships are often synergistic. This opinion article examines the role of nutrition in controlling NTDs and makes the point that mass drug treatment - the major strategy currently proposed to control several diseases - is crucial to controlling disease and transmission, but is only the start of the process of physical recovery. Without adequate energy and nutrients to repair damaged tissues or recover lost growth and development, the benefits of treatment may not be evident quickly; the effects of control programs may be not appreciated by beneficiaries; while vulnerability to reinfection and disease may not be reduced. There is substantial potential for nutritional interventions to be added to large-scale programs to deliver drug treatments and thereby contribute, within a broad strategy of public health interventions and behavior change activities, to controlling and preventing NTDs in populations, and to restoring their health.

  11. 33 CFR Appendix C to Part 273 - Information Requirements for Aquatic Plant Control Program Environmental Impact Statements

    Science.gov (United States)

    2010-07-01

    ... Aquatic Plant Control Program Environmental Impact Statements C Appendix C to Part 273 Navigation and... Environmental Impact Statements 1. Description of the problem. a. Pests. Identify the pest to be controlled by.... Relationship to environmental situation. Non-target organisms and integrated pest management programs. 2...

  12. Windows Calorimeter Control (WinCal) program computer software design description

    International Nuclear Information System (INIS)

    Pertzborn, N.F.

    1997-01-01

    The Windows Calorimeter Control (WinCal) Program System Design Description contains a discussion of the design details for the WinCal product. Information in this document will assist a developer in maintaining the WinCal system. The content of this document follows the guidance in WHC-CM-3-10, Software Engineering Standards, Standard for Software User Documentation

  13. A multifunction editor for programming control sequences for a robot based radiopharmaceutical synthesis system

    International Nuclear Information System (INIS)

    Appelquist, G.; Bohm, C.

    1990-01-01

    A Multifunction Editor is a development tool for building control sequences for a robotized production system for positron emitting radiopharmaceuticals. This system consists of SCARA robot and a PC-AT personal computer as a controller together with general and synthesis specific chemistry equipment. The general equipment, which is common for many synthesis, is fixed to the wall of the hotcell, while the specific equipment, dedicated to the given synthesis, is located on a removable tray. The program recognizes commands to move the robot, to control valves and to control the computer screen. From within the editor it is possible to run the control sequence forward or backward to test it and to use the single step feature to debug. The editor commands include insert, replace and delete of commands in the sequence. When programming or editing robot movements the robot may be controlled by the mouse, from the keyboard or from a remote control box. The robot control sequence consists of a succession of stored robot positions. The screen control is used to display dynamic flowchart diagrams. This is achieved by displaying a modified picture on the screen whenever the system state has been changed significantly

  14. Parametric synthesis of a robust controller on a base of mathematical programming method

    Science.gov (United States)

    Khozhaev, I. V.; Gayvoronskiy, S. A.; Ezangina, T. A.

    2018-05-01

    Considered paper is dedicated to deriving sufficient conditions, linking root indices of robust control quality with coefficients of interval characteristic polynomial, on the base of mathematical programming method. On the base of these conditions, a method of PI- and PID-controllers, providing aperiodic transient process with acceptable stability degree and, subsequently, acceptable setting time, synthesis was developed. The method was applied to a problem of synthesizing a controller for a depth control system of an unmanned underwater vehicle.

  15. The history and use of cancer registry data by public health cancer control programs in the United States.

    Science.gov (United States)

    White, Mary C; Babcock, Frances; Hayes, Nikki S; Mariotto, Angela B; Wong, Faye L; Kohler, Betsy A; Weir, Hannah K

    2017-12-15

    Because cancer registry data provide a census of cancer cases, registry data can be used to: 1) define and monitor cancer incidence at the local, state, and national levels; 2) investigate patterns of cancer treatment; and 3) evaluate the effectiveness of public health efforts to prevent cancer cases and improve cancer survival. The purpose of this article is to provide a broad overview of the history of cancer surveillance programs in the United States, and illustrate the expanding ways in which cancer surveillance data are being made available and contributing to cancer control programs. The article describes the building of the cancer registry infrastructure and the successful coordination of efforts among the 2 federal agencies that support cancer registry programs, the Centers for Disease Control and Prevention and the National Cancer Institute, and the North American Association of Central Cancer Registries. The major US cancer control programs also are described, including the National Comprehensive Cancer Control Program, the National Breast and Cervical Cancer Early Detection Program, and the Colorectal Cancer Control Program. This overview illustrates how cancer registry data can inform public health actions to reduce disparities in cancer outcomes and may be instructional for a variety of cancer control professionals in the United States and in other countries. Cancer 2017;123:4969-76. Published 2017. This article is a U.S. Government work and is in the public domain in the USA. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

  16. A flexible simulation program for multitasking operating systems to investigate controllers in thermal solar systems

    Energy Technology Data Exchange (ETDEWEB)

    Wittwer, C.; Horlitz, O.; Rommel, M. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany)

    1996-12-31

    This paper describes a new program CoISim to simulate systems with complex controllers which is based on a principle similar to the wide-spread modular program TRNSYS. To get an accurate response of this dynamic system, small time are used steps. A numerical integration algorithm is used which is especially suitable for solving a system of nonlinear equations. With time steps of 1 second, it is possible to observe the dynamic effect of ``matched flow systems`` where the flow is a continous function of the state. An important motivation for the development of this dynamic simulation model is the validation of system models. This will be possible by comparing simulations with real measurement data having different time steps. One of the main aims is to determine the dependence of the heat transfer in the collector and the heat exchanger and the flow speed of the fluid. The energy demand of the pump is greatly influenced very much by this dependency. The mass flow controller can be a simple ``two-position controller`` or, as well, a complex ``fuzzy controller``. To describe the fuzzy controller, a separate, commercially available development program may be used. The controller is usually implemented in ANSI-C. (orig.)

  17. Evaluating a community-based early childhood education and development program in Indonesia: study protocol for a pragmatic cluster randomized controlled trial with supplementary matched control group

    NARCIS (Netherlands)

    Pradhan, M.; Brinkman, S.A.; Beatty, A.; Maika, A.; Satriawan, E.; de Ree, J.; Hasan, A.

    2013-01-01

    Background This paper presents the study protocol for a pragmatic cluster randomized controlled trial (RCT) with a supplementary matched control group. The aim of the trial is to evaluate a community-based early education and development program launched by the Government of Indonesia. The program

  18. Evaluating a community-based early childhood education and development program in Indonesia: study protocol for a pragmatic cluster randomized controlled trial with supplementary matched control group

    NARCIS (Netherlands)

    Pradhan, M.P.; Brinkman, S.A.; Beatty, A.; Maika, A.; Satriawan, E.; de Ree, J.; Hasan, A.

    2013-01-01

    Background: This paper presents the study protocol for a pragmatic cluster randomized controlled trial (RCT) with a supplementary matched control group. The aim of the trial is to evaluate a community-based early education and development program launched by the Government of Indonesia. The program

  19. 2553 IJBCS-Article-Seyni Sané

    African Journals Online (AJOL)

    hp

    Etude de la dynamique de Bactrocera dorsalis (Hendel) (Diptera: Tephritidae) dans les vergers ... faibles «densités» semblent être les périodes les plus propices pour le contrôle des mouches. ... meilleure gestion des populations de mouches.

  20. FAMILY PYRGOTIDAE.

    Science.gov (United States)

    Mello, Ramon Luciano; Lamas, Carlos José Einicker

    2016-06-14

    Pyrgotidae is a family of endoparasitics flies of beetles with worldwide distribution. The Neotropical fauna is composed by 59 valid species names disposed in 13 genera. The occurrence of Pyrgota longipes Hendel is the first record of the family in Colombia.

  1. The CERN PS/SL Controls Java Application Programming Interface

    International Nuclear Information System (INIS)

    I. Deloose; J. Cuperus; P. Charrue; F. DiMaio; K. Kostro; M. Vanden Eynden; W. Watson

    1999-01-01

    The PS/SL Convergence Project was launched in March 1998. Its objective is to deliver a common control as infrastructure for the CERN accelerators by year 2001. In the framework of this convergence activity, a project was launched to develop a Java Application Programming Interface (API) between programs written in the Java language and the PS and SL accelerator equipment. This Java API was specified and developed in collaboration with TJNAF. It is based on the Java CDEV [1] package that has been extended in order to end up with a CERN/TJNAF common product. It implements a detailed model composed of devices organized in named classes that provide a property-based interface. It supports data subscription and introspection facilities. The device model is presented and the capabilities of the API are described with syntax examples. The software architecture is also described

  2. Pilot program of quality control in mammography and conventional equipment in the Antioquia Department

    International Nuclear Information System (INIS)

    Martinez, P.; Puerta, J.A.; Morales, J.; Beltran, C.C.

    2006-01-01

    The Sectional Health Division of Antioquia and the National University of Colombia- Medellin Headquarters formalized an agreement for the realization of the quality control of thirty mammographs and twenty-five conventional X-ray equipment located in the one metropolitan area of Medellin, and ten municipalities of the nine regions in that the antioquen county is divided. The National University of Colombia- Headquarters Medellin possesses a program for the formation in quality control and radiological protection at master level in physics for that which endowed a radiodiagnostic laboratory for these purposes. In the Antioquia department only exists an institution, the San Vicente of Paul University Hospital that possesses a quality control program in radiodiagnostic; this hospital given its great volume of studies in radiodiagnostic has a medical physicist and of that instrumental necessary to maintain the program. The quality control programs have not been implemented in the rest of health institutions, public or private, big or small, until the moment. The project then allowed to carry out an initial evaluation of the pertinent parameters of the quality control of the facilities like its are those that refer to the state of the x-ray generator, the disposition of the installation, the dark room, the film processor and negatoscopies room; these its were carried out with base in the protocol produced in the ARCAL XLIX project in which participated six Latin American countries. The dose average in mammography, following the proposed course in the ARCAL LXXV, where its participate eleven Latin American countries was also evaluated. This study pilot serves like reference of the current state of the regional radiodiagnostic services, with base in this sampling that is representative. The obtained data gave the necessary information so that the Sectional Division of Health of Antioquia can generate tending actions to the implementation of quality guarantee programs and

  3. Adaptive Event-Triggered Control Based on Heuristic Dynamic Programming for Nonlinear Discrete-Time Systems.

    Science.gov (United States)

    Dong, Lu; Zhong, Xiangnan; Sun, Changyin; He, Haibo

    2017-07-01

    This paper presents the design of a novel adaptive event-triggered control method based on the heuristic dynamic programming (HDP) technique for nonlinear discrete-time systems with unknown system dynamics. In the proposed method, the control law is only updated when the event-triggered condition is violated. Compared with the periodic updates in the traditional adaptive dynamic programming (ADP) control, the proposed method can reduce the computation and transmission cost. An actor-critic framework is used to learn the optimal event-triggered control law and the value function. Furthermore, a model network is designed to estimate the system state vector. The main contribution of this paper is to design a new trigger threshold for discrete-time systems. A detailed Lyapunov stability analysis shows that our proposed event-triggered controller can asymptotically stabilize the discrete-time systems. Finally, we test our method on two different discrete-time systems, and the simulation results are included.

  4. Trace contaminant control simulation computer program, version 8.1

    Science.gov (United States)

    Perry, J. L.

    1994-01-01

    The Trace Contaminant Control Simulation computer program is a tool for assessing the performance of various process technologies for removing trace chemical contamination from a spacecraft cabin atmosphere. Included in the simulation are chemical and physical adsorption by activated charcoal, chemical adsorption by lithium hydroxide, absorption by humidity condensate, and low- and high-temperature catalytic oxidation. Means are provided for simulating regenerable as well as nonregenerable systems. The program provides an overall mass balance of chemical contaminants in a spacecraft cabin given specified generation rates. Removal rates are based on device flow rates specified by the user and calculated removal efficiencies based on cabin concentration and removal technology experimental data. Versions 1.0 through 8.0 are documented in NASA TM-108409. TM-108409 also contains a source file listing for version 8.0. Changes to version 8.0 are documented in this technical memorandum and a source file listing for the modified version, version 8.1, is provided. Detailed descriptions for the computer program subprograms are extracted from TM-108409 and modified as necessary to reflect version 8.1. Version 8.1 supersedes version 8.0. Information on a separate user's guide is available from the author.

  5. A measurement control program to meet desired levels of precision and accuracy

    International Nuclear Information System (INIS)

    Bruckner, L.A.

    1991-01-01

    Measurement control programs are usually designed to test for precision and accuracy. Many instruments, however, display non-random data patterns such as biases or seasonal variations which are statistically significant but are of no practical significance. Application of the usual statistical tests can cause these instruments to be removed from service unnecessarily. It is tempting to try to overcome this problem by frequently adjusting the instrument or by arbitrarily changing the parameters of the statistical tests so that failures occur less often. This, of course invalidates the statistical tests. In the author's opinion, the correct way to handle this problem is to identify the desired levels of precision and accuracy, and then to combine these levels with valid statistical techniques in the measurement control-program. This paper describes one way to accomplish this

  6. Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review

    Directory of Open Access Journals (Sweden)

    Luke Perraton

    2009-11-01

    Full Text Available Luke Perraton, Zuzana Machotka, Saravana KumarInternational Centre for Allied Health Evidence, University of South Australia, Adelaide, South Australia, AustraliaAim: Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS. The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials.Method: A systematic review of randomized controlled trials was conducted. Only trials that have reported significant FMS-related outcomes were included. Data relating to the components of hydrotherapy programs (exercise type, duration, frequency and intensity, environmental factors, and service delivery were analyzed.Results: Eleven randomized controlled trials were included in this review. Overall, the quality of trials was good. Aerobic exercise featured in all 11 trials and the majority of hydrotherapy programs included either a strengthening or flexibility component. Great variability was noted in both the environmental components of hydrotherapy programs and service delivery.Conclusions: Aerobic exercise, warm up and cool-down periods and relaxation exercises are common features of hydrotherapy programs that report significant FMS-related outcomes. Treatment duration of 60 minutes, frequency of three sessions per week and an intensity equivalent to 60%–80% maximum heart rate were the most commonly reported exercise components. Exercise appears to be the most important component of an effective hydrotherapy program for FMS, particularly when considering mental health-related outcomes.Keywords: hydrotherapy, fibromyalgia syndrome, exercise, effective, components

  7. Web Environment for Programming and Control of a Mobile Robot in a Remote Laboratory

    Science.gov (United States)

    dos Santos Lopes, Maísa Soares; Gomes, Iago Pacheco; Trindade, Roque M. P.; da Silva, Alzira F.; de C. Lima, Antonio C.

    2017-01-01

    Remote robotics laboratories have been successfully used for engineering education. However, few of them use mobile robots to to teach computer science. This article describes a mobile robot Control and Programming Environment (CPE) and its pedagogical applications. The system comprises a remote laboratory for robotics, an online programming tool,…

  8. The preliminary effect of a parenting program for Korean American mothers: a randomized controlled experimental study.

    Science.gov (United States)

    Kim, Eunjung; Cain, Kevin C; Webster-Stratton, Carolyn

    2008-09-01

    Traditional Korean American discipline is characterized by a lack of expression of affection and use of harsh discipline. The purpose of this study was to pilot test the effect of the Incredible Years Parenting Program among Korean American mothers. A randomized controlled experimental study design was used; 29 first-generation Korean American mothers of young children (3-8 years old) were randomly assigned to intervention (n=20) and control (n=9) groups. Intervention group mothers received a 12-week parenting program. Control group mothers did not receive the intervention. Mothers reported on discipline styles (positive, appropriate, and harsh), level of acculturation, and their child's outcomes (behavioral problems and social competence) at pre-, post-, and 1-year follow-up intervals. After completing the program, intervention group mothers significantly increased use of positive discipline as compared to control group mothers. Among intervention group mothers, high-acculturated mothers significantly increased appropriate discipline whereas low-acculturated mothers significantly decreased harsh discipline. In the 1-year follow-up, intervention group mothers maintained the significant effect for positive discipline. Providing this program appears to be a promising way of promoting positive discipline among Korean American mothers.

  9. Impact of an exercise program on acylcarnitines in obesity: a prospective controlled study

    Directory of Open Access Journals (Sweden)

    Rodríguez-Gutiérrez René

    2012-05-01

    Full Text Available Abstract Background Acylcarnitine (AC transport dysfunction into the mitochondrial matrix is one of the pathophysiological mechanisms of type 2 diabetes mellitus (DM. The effect of an aerobic exercise (AE program on this condition in obese subjects without DM is unclear. Methods A prospective, randomized, longitudinal, interventional study in a University Research Center involved a 10-week AE program in 32 women without DM and a body mass index (BMI greater than 27 kg/m2. (Cases n = 17; Controls n = 15. The primary objective was to evaluate the influence of a controlled AE program on beta-oxidation according to modifications in short, medium, and long-chain ACs. Secondary objectives were to define the behavior of amino acids, and the correlation between these modifications with metabolic and anthropometric markers. Results The proportion of dropouts was 17% and 6% in controls and cases, respectively. In cases there was a significant reduction in total carnitine (30.40 [95% CI 28.2 to 35.6] vs. (29.4 [CI 95% 25.1 to 31.7] p = 0.0008 and long-chain AC C14 (0.06 [95% CI 0.05 to 0.08] vs. (0.05 [95% CI 0.05 to 0.09] p = 0.005 and in C18 (0.31 [95% CI 0.27 to 0.45] vs. (0.28 [95% CI 0.22 to 0.32] p = 0.03. Free fatty acid levels remained without change during the study in both groups. Conclusion In conclusion, a controlled 10-week AE program improved beta-oxidation by reducing long-chain ACs. This finding highlights the importance that AE might have in avoiding or reverting lipotoxicity, and in consequence, improving insulin sensitivity and pancreatic beta cell functional reserve.

  10. Population-level effects of automated smoking cessation help programs: a randomized controlled trial.

    Science.gov (United States)

    Borland, Ron; Balmford, James; Benda, Peter

    2013-03-01

    To test the population impact of offering automated smoking cessation interventions via the internet and/or by mobile phone. Pragmatic randomized controlled trial with five conditions: offer of (i) minimal intervention control; (ii) QuitCoach personalized tailored internet-delivered advice program; (iii) onQ, an interactive automated text-messaging program; (iv) an integration of both QuitCoach and onQ; and (v) a choice of either alone or the combined program. Australia, via a mix of internet and telephone contacts. A total of 3530 smokers or recent quitters recruited from those interested in quitting, and seeking self-help resources (n = 1335) or cold-contacted from internet panels (n = 2195). The primary outcome was self-report of 6 months sustained abstinence at 7 months post-recruitment. Only 42.5% of those offered one of the interventions took it up to a minimal level. The intervention groups combined had a non-significantly higher 6-month sustained abstinence rate than the control [odds ratio (OR) = 1.48; 95% confidence interval (CI): 0.98-2.24] (missing cases treated as smokers), with no differences between the interventions. Among those who used an intervention, there was a significant overall increase in abstinence (OR = 1.95; CI: 1.04-3.67), but not clearly so when analysing only cases with reported outcomes. Success rates were greater among those recruited after seeking information compared to those cold-contacted. Smokers interested in quitting who were assigned randomly to an offer of either the QuitCoach internet-based support program and/or the interactive automated text-messaging program had non-significantly greater odds of quitting for at least 6 months than those randomized to an offer of a simple information website. © 2012 The Authors, Addiction © 2012 Society for the Study of Addiction.

  11. Effectiveness of a parent training program in (pre)adolescence: Evidence from a randomized controlled trial

    NARCIS (Netherlands)

    Leijten, P.H.O.; Overbeek, G.J.; Janssens, J.M.A.M.

    2012-01-01

    The present randomized controlled trial examined the effectiveness of the parent training program Parents and Children Talking Together (PCTT) for parents with children in the preadolescent period who experience parenting difficulties. The program is focused on reducing child problem behavior by

  12. Six Sigma Evaluation of the High Level Waste Tank Farm Corrosion Control Program at the Savannah River Site

    International Nuclear Information System (INIS)

    Hill, P. J.

    2003-01-01

    Six Sigma is a disciplined approach to process improvement based on customer requirements and data. The goal is to develop or improve processes with defects that are measured at only a few parts per million. The process includes five phases: Identify, Measure, Analyze, Improve, and Control. This report describes the application of the Six Sigma process to improving the High Level Waste (HLW) Tank Farm Corrosion Control Program. The report documents the work performed and the tools utilized while applying the Six Sigma process from September 28, 2001 to April 1, 2002. During Fiscal Year 2001, the High Level Waste Division spent $5.9 million to analyze samples from the F and H Tank Farms. The largest portion of these analytical costs was $2.45 million that was spent to analyze samples taken to support the Corrosion Control Program. The objective of the Process Improvement Project (PIP) team was to reduce the number of analytical tasks required to support the Corrosion Control Program by 50 percent. Based on the data collected, the corrosion control decision process flowchart, and the use of the X-Y Matrix tool, the team determined that analyses in excess of the requirements of the corrosion control program were being performed. Only two of the seven analytical tasks currently performed are required for the 40 waste tanks governed by the Corrosion Control Program. Two additional analytical tasks are required for a small subset of the waste tanks resulting in an average of 2.7 tasks per sample compared to the current 7 tasks per sample. Forty HLW tanks are sampled periodically as part of the Corrosion Control Program. For each of these tanks, an analysis was performed to evaluate the stability of the chemistry in the tank and then to determine the statistical capability of the tank to meet minimum corrosion inhibitor limits. The analyses proved that most of the tanks were being sampled too frequently. Based on the results of these analyses and th e use of additional

  13. A Comprehensive Examination of the Influence of State Tobacco Control Programs and Policies on Youth Smoking

    Science.gov (United States)

    Loomis, Brett R.; Han, Beth; Gfroerer, Joe; Kuiper, Nicole; Couzens, G. Lance; Dube, Shanta; Caraballo, Ralph S.

    2013-01-01

    Objectives. We examined the influence of tobacco control policies (tobacco control program expenditures, smoke-free air laws, youth access law compliance, and cigarette prices) on youth smoking outcomes (smoking susceptibility, past-year initiation, current smoking, and established smoking). Methods. We combined data from the 2002 to 2008 National Surveys on Drug Use and Health with state and municipality population data from the US Census Bureau to assess the associations between state tobacco control policy variables and youth smoking outcomes, focusing on youths aged 12 to 17 years. We also examined the influence of policy variables on youth access when these variables were held at 2002 levels. Results. Per capita funding for state tobacco control programs was negatively associated with all 4 smoking outcomes. Smoke-free air laws were negatively associated with all outcomes except past-year initiation, and cigarette prices were associated only with current smoking. We found no association between these outcomes and retailer compliance with youth access laws. Conclusions. Smoke-free air laws and state tobacco control programs are effective strategies for curbing youth smoking. PMID:23327252

  14. Liquefied Gaseous Fuels Safety and Environmental Control Assessment Program: second status report

    Energy Technology Data Exchange (ETDEWEB)

    1980-10-01

    The Assistant Secretary for Environment has responsibility for identifying, characterizing, and ameliorating the environmental, health, and safety issues and public concerns associated with commercial operation of specific energy systems. The need for developing a safety and environmental control assessment for liquefied gaseous fuels was identified by the Environmental and Safety Engineering Division as a result of discussions with various governmental, industry, and academic persons having expertise with respect to the particular materials involved: liquefied natural gas, liquefied petroleum gas, hydrogen, and anhydrous ammonia. This document is arranged in three volumes and reports on progress in the Liquefied Gaseous Fuels (LGF) Safety and Environmental Control Assessment Program made in Fiscal Year (FY)-1979 and early FY-1980. Volume 1 (Executive Summary) describes the background, purpose and organization of the LGF Program and contains summaries of the 25 reports presented in Volumes 2 and 3. Annotated bibliographies on Liquefied Natural Gas (LNG) Safety and Environmental Control Research and on Fire Safety and Hazards of Liquefied Petroleum Gas (LPG) are included in Volume 1.

  15. Perceptions, circumstances and motivators that influence implementation of zoonotic control programs on cattle farms

    NARCIS (Netherlands)

    Ellis-Iversen, J.; Cook, A.J.; Watson, E.; Nielen, M.; Larkin, L.; Wooldridge, M.; Hogeveen, H.

    2010-01-01

    The implementation of disease control programs on farms requires an act of behavioral change. This study presents a theoretical framework from behavioral science, combined with basic epidemiological principles to investigate and explain the control of zoonotic agents on cattle farms. A pathway to

  16. SisterTalk: final results of a culturally tailored cable television delivered weight control program for Black women

    OpenAIRE

    Risica, Patricia Markham; Gans, Kim M; Kumanyika, Shiriki; Kirtania, Usree; Lasater, Thomas M

    2013-01-01

    Background Obesity among Black women continues to exceed that of other women. Most weight loss programs created without reference to specific cultural contexts are less effective for Black than White women. Weight control approaches accessible to Black women and adapted to relevant cultural contexts are important for addressing this problem. This paper reports the final results of SisterTalk, the randomized controlled trial of a cable TV weight control program oriented toward Black women. Met...

  17. National Spill Control School. A pilot program in environmental training. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Oberholtzer, G.R.; Acuff, J.T.

    1980-01-01

    Increased environmental awareness and the amended Federal Water Pollution Control Act of 1972 required an increased level of expertise by the American Public in the field of oil spill prevention and control. The National Spill Control School was created at Corpus Christi State University to help meet this need. Drawing on the talents of a nationwide sample of experts in this field, the project team created a unique management oriented course. A review of the origination and experiences of two years of classes of this pilot program is provided in this report.

  18. Susceptibility of low-chill blueberry cultivars to oriental fruit fly, mediterranean fruit fly, and melon fly (Diptera: Tephritidae)

    Science.gov (United States)

    Forced infestation studies were conducted to determine if fruits of southern highbush blueberries (Vaccinium corymbosum L. hybrids) are hosts for three invasive tephritid fruit flies. Fruits of 17 blueberry cultivars were exposed to gravid female flies of Bactrocera dorsalis (Hendel) (oriental frui...

  19. Low-dose irradiation with modified atmosphere packaging for mango against the Oriental Fruit Fly (Diptera: Tephritidae)

    Science.gov (United States)

    Irradiation and vapor–heating treatments are commonly used to disinfest the Oriental fruit fly, Bactrocera dorsalis (Hendel) (Diptera:Tephritidae), and other pests on mango fruits before export from Thailand to foreign markets. Modified atmosphere packaging (MAP) used during export of mangoes create...

  20. A randomised controlled trial of a web-based educational program in child mental health for schoolteachers.

    Science.gov (United States)

    Pereira, Celina Andrade; Wen, Chao Lung; Miguel, Eurípedes Constantino; Polanczyk, Guilherme V

    2015-08-01

    Children affected by mental disorders are largely unrecognised and untreated across the world. Community resources, including the school system and teachers, are important elements in actions directed to promoting child mental health and preventing and treating mental disorders, especially in low- and middle-income countries. We developed a web-based program to educate primary school teachers on mental disorders in childhood and conducted a cluster-randomised controlled trial to test the effectiveness of the web-based program intervention in comparison with the same program based on text and video materials only and to a waiting-list control group. All nine schools of a single city in the state of São Paulo, Brazil, were randomised to the three groups, and teachers completed the educational programs during 3 weeks. Data were analysed according to complete cases and intention-to-treat approaches. In terms of gains of knowledge about mental disorders, the web-based program intervention was superior to the intervention with text and video materials, and to the waiting-list control group. In terms of beliefs and attitudes about mental disorders, the web-based program intervention group presented less stigmatised concepts than the text and video group and more non-stigmatised concepts than the waiting-list group. No differences were detected in terms of teachers' attitudes. This study demonstrated initial data on the effectiveness of a web-based program in educating schoolteachers on child mental disorders. Future studies are necessary to replicate and extend the findings.

  1. The Material Protection, Control and Accounting Sustainability Program Implementation at the Electrochemical Plant

    International Nuclear Information System (INIS)

    Sirotenko, Vladimir; Antonov, Eduard; Sirotenko, Alexei; Kukartsev, Alexander; Krivenko, Vladimir; Dabbs, Richard D.; Carroll, Michael F.; Garrett, Albert G.; Patrick, Scott W.; Ku, Esther M.

    2008-01-01

    Joint efforts by the Electrochemical Plant (ECP) in Zelenogorsk, Russia, and the United States Department of Energy National Nuclear Security Administration (US DOE/NNSA) Material Protection, Control and Accounting (MPC and A) Program to upgrade ECP security systems began in 1996. The commissioning of major MPC and A systems at ECP occurred in December 2004. Since that time, the US Project Team (USPT) and ECP personnel have focused jointly on the development and implementation of an enterprise-wide MPC and A Sustainability Program (SP) that address the seven essential MPC and A Program sustainability elements. This paper describes current operational experience at the ECP with the full implementation of the site SP utilizing an earned-value methodology. In support of this site program, ECP has established a Document Control Program (DCP) for sustainability-related documents; developed a robust master Work Breakdown Structure (WBS) that outlines all ECP MPC and A sustainability activities; and chartered an Enterprise-Wide Sustainability Working Group (ESWG) The earned value methodology uses ECP-completed (and USPT-verified) analyses to assess project performance on a quarterly basis. The MPC and A SP, presently operational through a contract between ECP and the Los Alamos National Laboratory (LANL), incorporates the seven essential MPC and A Program sustainability elements and governs all sustainability activities associated with MPC and A systems at ECP. The site SP is designed to ensure over the near term the upgraded MPC and A systems continuous operation at ECP as funding transitions from US-assisted to fully Russian supported and sustained

  2. Impact of Frequent Interruption on Nurses' Patient-Controlled Analgesia Programming Performance.

    Science.gov (United States)

    Campoe, Kristi R; Giuliano, Karen K

    2017-12-01

    The purpose was to add to the body of knowledge regarding the impact of interruption on acute care nurses' cognitive workload, total task completion times, nurse frustration, and medication administration error while programming a patient-controlled analgesia (PCA) pump. Data support that the severity of medication administration error increases with the number of interruptions, which is especially critical during the administration of high-risk medications. Bar code technology, interruption-free zones, and medication safety vests have been shown to decrease administration-related errors. However, there are few published data regarding the impact of number of interruptions on nurses' clinical performance during PCA programming. Nine acute care nurses completed three PCA pump programming tasks in a simulation laboratory. Programming tasks were completed under three conditions where the number of interruptions varied between two, four, and six. Outcome measures included cognitive workload (six NASA Task Load Index [NASA-TLX] subscales), total task completion time (seconds), nurse frustration (NASA-TLX Subscale 6), and PCA medication administration error (incorrect final programming). Increases in the number of interruptions were associated with significant increases in total task completion time ( p = .003). We also found increases in nurses' cognitive workload, nurse frustration, and PCA pump programming errors, but these increases were not statistically significant. Complex technology use permeates the acute care nursing practice environment. These results add new knowledge on nurses' clinical performance during PCA pump programming and high-risk medication administration.

  3. Assessing Awareness and Use of Evidence-Based Programs for Cancer Control in Puerto Rico

    Science.gov (United States)

    Calo, William A.; Fernández, María E.; Rivera, Mirza; Díaz, Elba C.; Correa-Fernández, Virmarie; Pattatucci, Angela; Wetter, David W.

    2012-01-01

    The Community Cancer Control Outreach Program (CCCOP) is a community-academic partnership aimed at developing and implementing a cancer control outreach, research, and training program in Puerto Rico. The CCCOP surveyed 56 partners to assess their awareness, training needs, and use of resources related to evidence-based programs (EBPs). Despite relatively high levels (70%) of confidence in adopting EBPs, there were low levels of awareness (37%) and use (25%) of existing EBPs resources. Respondents’ who had used EBPs resources were more likely to have positive beliefs about EBPs than nonusers (p<0.05). Training needs were high among respondents and no significant differences were found between those who had and had not used existing EBPs resources. These findings can guide the development of training tools and technical assistance to increase the use of EBPs for Latino audiences. PMID:22528632

  4. Effects of a dynamic core stability program on the biomechanics of cutting maneuvers: A randomized controlled trial.

    Science.gov (United States)

    Whyte, E F; Richter, C; O'Connor, S; Moran, K A

    2018-02-01

    Deficits in trunk control predict ACL injuries which frequently occur during high-risk activities such as cutting. However, no existing trunk control/core stability program has been found to positively affect trunk kinematics during cutting activities. This study investigated the effectiveness of a 6-week dynamic core stability program (DCS) on the biomechanics of anticipated and unanticipated side and crossover cutting maneuvers. Thirty-one male, varsity footballers participated in this randomized controlled trial. Three-dimensional trunk and lower limb biomechanics were captured in a motion analysis laboratory during the weight acceptance phase of anticipated and unanticipated side and crossover cutting maneuvers at baseline and 6-week follow-up. The DCS group performed a DCS program three times weekly for 6 weeks in a university rehabilitation room. Both the DCS and control groups concurrently completed their regular practice and match play. Statistical parametric mapping and repeated measures analysis of variance were used to determine any group (DCS vs control) by time (pre vs post) interactions. The DCS resulted in greater internal hip extensor (P=.017, η 2 =0.079), smaller internal knee valgus (P=.026, η 2 =0.076), and smaller internal knee external rotator moments (P=.041, η 2 =0.066) during anticipated side cutting compared with the control group. It also led to reduced posterior ground reaction forces for all cutting activities (P=.015-.030, η 2 =0.074-0.105). A 6-week DCS program did not affect trunk kinematics, but it did reduce a small number of biomechanical risk factors for ACL injury, predominantly during anticipated side cutting. A DCS program could play a role in multimodal ACL injury prevention programs. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  5. National Waste Terminal Storage Program: planning and control plan. Volume II. Plan description

    International Nuclear Information System (INIS)

    1977-05-01

    Objective of the NWTS program planning and control plan is to provide the information necessary for timely and effective OWI management decisions. Purpose is to describe the concepts and techniques that will be utilized by OWI to establish structured, completely planned and controlled technical, cost, and schedule NWTS baselines from which performance or progress can be accurately measured

  6. Uncertainty Modeling and Robust Output Feedback Control of Nonlinear Discrete Systems: A Mathematical Programming Approach

    Directory of Open Access Journals (Sweden)

    Olav Slupphaug

    2001-01-01

    Full Text Available We present a mathematical programming approach to robust control of nonlinear systems with uncertain, possibly time-varying, parameters. The uncertain system is given by different local affine parameter dependent models in different parts of the state space. It is shown how this representation can be obtained from a nonlinear uncertain system by solving a set of continuous linear semi-infinite programming problems, and how each of these problems can be solved as a (finite series of ordinary linear programs. Additionally, the system representation includes control- and state constraints. The controller design method is derived from Lyapunov stability arguments and utilizes an affine parameter dependent quadratic Lyapunov function. The controller has a piecewise affine output feedback structure, and the design amounts to finding a feasible solution to a set of linear matrix inequalities combined with one spectral radius constraint on the product of two positive definite matrices. A local solution approach to this nonconvex feasibility problem is proposed. Complexity of the design method and some special cases such as state- feedback are discussed. Finally, an application of the results is given by proposing an on-line computationally feasible algorithm for constrained nonlinear state- feedback model predictive control with robust stability.

  7. Participation in a National Lifestyle Change Program is associated with improved diabetes Control outcomes.

    Science.gov (United States)

    Jackson, Sandra L; Staimez, Lisa R; Safo, Sandra; Long, Qi; Rhee, Mary K; Cunningham, Solveig A; Olson, Darin E; Tomolo, Anne M; Ramakrishnan, Usha; Narayan, Venkat K M; Phillips, Lawrence S

    2017-09-01

    Clinical trials show lifestyle change programs are beneficial, yet large-scale, successful translation of these programs is scarce. We investigated the association between participation in the largest U.S. lifestyle change program, MOVE!, and diabetes control outcomes. This longitudinal, retrospective cohort study used Veterans Health Administration databases of patients with diabetes who participated in MOVE! between 2005 and 2012, or met eligibility criteria (BMI ≥25kg/m 2 ) but did not participate. Main outcomes were diabetic eye disease, renal disease, and medication intensification. There were 400,170 eligible patients with diabetes, including 87,366 (22%) MOVE! Included patients were 96% male, 77% white, with mean age 58years and BMI 34kg/m 2 . Controlling for baseline measurements and age, race, sex, BMI, and antidiabetes medications, MOVE! participants had lower body weight (-0.6kg), random plasma glucose (-2.8mg/dL), and HbA1c (-0.1%) at 12months compared to nonparticipants (each plifestyle change programs in U.S. health systems may improve health among the growing patient population with diabetes. Published by Elsevier Inc.

  8. Host range and reproductive output of Diachasmimorpha kraussii (Hymenoptera: Braconidae), a parasitoid of tephritid fruit flies newly imported to Hawaii

    International Nuclear Information System (INIS)

    Messing, R.H.; Ramadan, M.M.

    2000-01-01

    Four exotic tephritid fruit fly pests have colonised the Hawaiian islands over the past 100 years, where they have become major pests infesting hundreds of horticultural crops. The Mediterranean fruit fly, Ceratitis capitata (Wiedemann), Oriental fruit fly, Bactrocera dorsalis (Hendel), melon fly, B. cucurbitae (Coquillett), and Solanaceous fruit fly, B. latifrons (Hendel) are considered among the major obstacles to the development of a more robust agricultural economy in the state of Hawaii. Furthermore, the flies pose a continuous threat to agriculture in California and other areas in the southern United States, where it has been estimated that the establishment of the Medfly alone would result in losses of over one billion dollars annually (Andrew et al. 1978). Entomologists in Hawaii have conducted a number of classical biological control programmes against these tephritid pests over the years, resulting in the establishment of several parasitoid species and partial control of the flies in some crops (see reviews in Clausen et al. 1965, Wharton 1989). However, these programmes were conducted before the invasion of the state by the Solanaceous fruit fly; thus, there have been no biocontrol programmes targeted against this pest. Also, several entomologists have pointed out the potential of improved control over the other tephritid species in Hawaii by introducing new natural enemies (Gilstrap and Hart 1987, Messing 1995, Steck et al. 1986, Wharton 1989, Wong and Ramadan 1992). We have therefore renewed efforts to import parasitoids from tropical and sub-tropical areas around the world to attack tephritid fruit flies in Hawaii. As part of this effort, we imported Diachasmimorpha kraussii Fullaway from Queensland, Australia, where it is an endemic parasitoid of Bactrocera tryoni (Froggatt) and several other endemic Australian tephritids. This paper reports the results of initial host range tests and studies on the reproductive output of D. kraussii in quarantine

  9. Schistosomiasis Sustained Control Program in Ethnic Groups Around Ninefescha (Eastern Senegal).

    Science.gov (United States)

    N'Diaye, Monique; Dioukhane, Elhadji M; Ndao, Babacar; Diedhiou, Kemo; Diawara, Lamine; Talla, Idrissa; Vernet, Charlotte; Bessin, François; Barbier, Dominique; Dewavrin, Patrick; Klotz, Francis; Georges, Pierre

    2016-09-07

    Schistosomiasis is the second most significant parasitic disease in children in several African countries. For this purpose, the "Programme National de Lutte contre les Bilharzioses" (PNLB) was developed in partnership with the World Health Organization (WHO) to control this disease in Senegal. However, geographic isolation of Bedik ethnic groups challenged implementation of the key elements of the schistosomiasis program in eastern Senegal, and therefore, a hospital was established in Ninefescha to improve access to health care as well as laboratory support for this population. The program we have implemented from 2008 in partnership with the PNLB/WHO involved campaigns to 1) evaluate schistosomiasis prevalence in children of 53 villages around Ninefescha hospital, 2) perform a mass drug administration following the protocol established by the PNLB in school-aged children, 3) monitor annual prevalence, 4) implement health education campaigns, and 5) oversee the building of latrines. This campaign led to a drop in schistosomiasis prevalence but highlighted that sustainable schistosomiasis control by praziquantel treatment, awareness of the use of latrines, and inhabitants' voluntary commitment to the program are crucial to improve Schistosoma elimination. Moreover, this study revealed that preschool-aged children, for whom praziquantel was not recommended until 2014 in Senegal, constituted a significant reservoir for the parasite. © The American Society of Tropical Medicine and Hygiene.

  10. SAVLOC, computer program for automatic control and analysis of X-ray fluorescence experiments

    Science.gov (United States)

    Leonard, R. F.

    1977-01-01

    A program for a PDP-15 computer is presented which provides for control and analysis of trace element determinations by using X-ray fluorescence. The program simultaneously handles data accumulation for one sample and analysis of data from previous samples. Data accumulation consists of sample changing, timing, and data storage. Analysis requires the locating of peaks in X-ray spectra, determination of intensities of peaks, identification of origins of peaks, and determination of a real density of the element responsible for each peak. The program may be run in either a manual (supervised) mode or an automatic (unsupervised) mode.

  11. Maintaining quality control in a nontraditional nuclear technology degree program

    International Nuclear Information System (INIS)

    DeSain, G.W.

    1989-01-01

    Regents College, created by the Board of Regents of the University of The State on New York in 1971, has been offering, since January 1985, AS and BS degrees in nuclear technology. The impetus for establishing the nuclear technology degrees came from nuclear utility management and had to do with the US Nuclear Regulatory Commission proposed rule regarding degreed operators on shift. There are a variety of ways to earn credits in Regents College degree programs: (1) college courses taken for degree-level credit from regionally accredited colleges; (2) courses sponsored by business, industry, or government that have been evaluated and recommended for credit by the New York National or American Council on Education (ACE's) Program on Noncollegiate Sponsored Instruction (PONSI); (3) military education that has been evaluated by ACE PONSI; (4) approved college-proficiency examinations; and (5) special assessment: an individualized examination of college-level knowledge gained from experience or independent study. Nuclear technology students primarily use college course work, evaluated military education, and proficiency examinations to complete degree programs. However, an increasing number of utilities are having training programs PONSI evaluated, resulting in an increased use of these courses in the nuclear technology degrees. Quality control is a function of several factors described in the paper

  12. Postural control in elderly persons with osteoporosis: Efficacy of an intervention program to improve balance and muscle strength: a randomized controlled trial.

    Science.gov (United States)

    Burke, Thomaz Nogueira; França, Fábio Jorge Renovato; Ferreira de Meneses, Sarah Rúbia; Cardoso, Viviam Inhasz; Marques, Amélia Pasqual

    2010-07-01

    To assess the efficacy of an exercise program aiming to improve balance and muscular strength, for postural control and muscular strength of women with osteoporosis. Sample consisted of 33 women with osteoporosis, randomized into one of two groups: intervention group, in which exercises for balance and improvement of muscular strength of the inferior members were performed for 8 wks (n = 17, age 72.8 +/- 3.6 yrs); control group, which was women not practicing exercises (n = 16, age 74.4 +/- 3.7 yrs). At baseline and after 8 wks of treatment, postural control was assessed using a force plate (Balance Master, Neurocom), and muscular strength during ankle dorsiflexion, knee extension, and flexion was assessed by dynamometry. Adherence to the program was 82%. When compared with the control group, individuals in the intervention group significantly improved the center of pressure velocity (P = 0.02) in the modified clinical test of sensory interaction for balance test, center of pressure velocity (P control (P postural control and lower-limb strength in elderly women with osteoporosis.

  13. DBSSP - A computer program for simulation of controlled circulation boiler and natural circulation boiler start up behavior

    International Nuclear Information System (INIS)

    Li Bin; Chen Tingkuan; Yang Dong

    2005-01-01

    In this paper, a computer program, Drum Boiler Start-up Simulation Program (DBSSP), is developed for simulating the start up behavior of controlled circulation and natural circulation boilers. The mathematical model developed here is based on the first principles of mass, energy and momentum conservations. In the boiler model, heat transfer in the waterwall, the superheater, the reheater and the economizer is simulated by the distributing parameter method, while heat transfer in the drum and the downcomer is simulated by lumped parameter analysis. The program can provide detailed flow and thermodynamic characteristics of the boiler components. The development of this program is based only on design data, so it can be used for any subcritical, controlled or natural circulation boiler. The simulation results were compared with experimental measurements, and good agreements between them were found. This program is expected to be useful for predicting the characteristics and the performance of controlled circulation and natural circulation boilers during the start up process. It also can be used to optimize a start up system for minimum start up time

  14. Applying economic incentives to increase effectiveness of an outpatient weight loss program (TRIO) - A randomized controlled trial.

    Science.gov (United States)

    Finkelstein, Eric A; Tham, Kwang-Wei; Haaland, Benjamin A; Sahasranaman, Aarti

    2017-07-01

    The prevalence of overweight and obesity has more than doubled in the past three decades, leading to rising rates of non-communicable diseases. This study tests whether adding a payment/rewards (term reward) program to an existing evidence-based weight loss program can increase weight loss and weight loss maintenance. We conducted a parallel-group randomized controlled trial from October 2012 to October 2015 with 161 overweight or obese individuals randomized to either control or reward arm in a 1:2 ratio. Control and reward arm participants received a four month weight loss program at the LIFE (Lifestyle Improvement and Fitness Enhancement) Centre at Singapore General Hospital. Those in the reward arm paid a fee of S$165.00 (1US$ = 1.35S$) to access a program that provided rewards of up to S$660 for meeting weight loss and physical activity goals. Participants could choose to receive rewards as guaranteed cash payments or a lottery ticket with a 1 in 10 chance of winning but with the same expected value. The primary outcome was weight loss at months 4, 8, and 12. 161 participants were randomized to control (n = 54) or reward (n = 107) arms. Average weight loss was more than twice as great in the reward arm compared to the control arm at month 4 when the program concluded (3.4 kg vs 1.4 kg, p rewards concluded (3.3 kg vs 1.8 kg, p rewards program can be used to improve weight loss and weight loss maintenance when combined with an evidence-based weight loss program. Future efforts should attempt to replicate this approach and identify how to cost effectively expand these programs to maximize their reach. This study is registered at www.clinicaltrials.gov (Identifier: NCT01533454). Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. 21 CFR 1301.73 - Physical security controls for non-practitioners; compounders for narcotic treatment programs...

    Science.gov (United States)

    2010-04-01

    ...; compounders for narcotic treatment programs; manufacturing and compounding areas. 1301.73 Section 1301.73 Food... controls for non-practitioners; compounders for narcotic treatment programs; manufacturing and compounding... unauthorized persons may not enter or leave the area without his knowledge. (c) During the production of...

  16. Installation of PMV Operation Program in DDC Controller and Air Conditioning Control Using PMV Directly as Set Point

    Science.gov (United States)

    Haramoto, Ken-Ichi

    In general, air conditioning control in a building is operated mainly by indoor air temperature control. Although the operators of the machine in the building accepted a claim for indoor air temperature presented by the building inhabitants, the indoor conditions have been often too cool or warm. Therefore, in an attempt to create better thermal environments, the author paid attention to the PMV that is a thermal comfort index. And then, the possibility of air conditioning control using the PMV directly as the set point was verified by employing actual equipment in an air conditioning testing room and an office building. Prior to the execution of this control, the operation program of the PMV was installed in a DDC controller for the air conditioning control. And information from indoor sensors and so on was inputted to the controller, and the computed PMV was used as the feedback variable.

  17. Study on chemical reactivity control of liquid sodium. Research program

    International Nuclear Information System (INIS)

    Saito, Jun-ichi; Ara, Kuniaki; Sugiyama, Ken-ichiro; Kitagawa, Hiroshi; Oka, Nobuki; Yoshioka, Naoki

    2007-01-01

    Liquid sodium has the excellent properties as coolant of the fast breeder reactor (FBR). On the other hand, it reacts high with water and oxygen. So an innovative technology to suppress the reactivity is desired. The purpose of this study is to control the chemical reactivity of liquid sodium by dispersing the nanometer-size metallic particles (we call them Nano-particles) into liquid sodium. We focus on the atomic interaction between Nano-particles and sodium atoms. And we try to apply it to suppress the chemical reactivity of liquid sodium. Liquid sodium dispersing Nano-particles is named 'Nano-fluid'. Research programs of this study are the Nano-particles production, the evaluation of reactivity suppression of liquid sodium and the feasibility study to FBR plant. In this paper, the research programs and status are described. The important factors for particle production were understood. In order to evaluate the chemical reactivity of Nano-fluid the research programs were planned. The feasibility of the application of Nano-fluid to the coolant of FBR plant was evaluated preliminarily from the viewpoint of design and operation. (author)

  18. A Web Based Educational Programming Logic Controller Training Set Based on Vocational High School Students' Demands

    Directory of Open Access Journals (Sweden)

    Abdullah Alper Efe

    2018-01-01

    Full Text Available The purpose of this study was to design and develop aProgramming Logic Controller Training Set according to vocational high school students’ educational needs. In this regard, by using the properties of distance education the proposed system supported “hands-on” PLC programming laboratory exercises in industrial automation area. The system allowed students to access and control the PLC training set remotely. For this purpose, researcher designed a web site to facilitate students’ interactivity and support PLC programming. In the training set, Induction Motor, Frequency Converter and Encoder tripart controlled by Siemens Simatic S7-200 PLC controller by the help of SIMATIC Step 7 Programming Software were used to make the system more effective and efficient. Moreover, training set included an IP camera system allowing to monitor devices and pilot application. By working with this novel remote accessible training set, students and researchers recieved a chance to inhere self paced learning experiences. Also, The PLC training set offered an effective learning enviroenment for distance education, which is based on presenting the content on the web and opening it to the online users and provided a safe and economical solution for multiple users in a workplace to enhance the quality of education with less overall cost.

  19. Radiological control aspects of the fabrication of the Light Water Breeder Reactor core (LWBR Development Program)

    International Nuclear Information System (INIS)

    Schultz, B.G.

    1979-05-01

    A description is presented of the radiological control aspects of the fabrication of the Light Water Breeder Reactor (LWBR) core. Included are the radiological control criteria applied for the design and use of fabrication facilities, the controls and limits imposed to minimize radiaion exposure to personnel, and an evaluation of the applied radiological program in meeting the program objectives. The goal of the LWBR program is to develop the technology to breed in light water reactors so that nuclear fuel may be used significantly more efficiently in these reactors. This technology is being developed by designing and fabricating a breeder reactor core, utilizing thoria (ThO 2 ) and binary thoria--urania (ThO 2 - 233 UO 2 ) fuel, to be operated in the existing pressurized water reactor plant owned by the Department of Energy at Shippingport, Pennsylvania

  20. The Centers for Disease Control program to prevent primary and secondary disabilities in the United States.

    OpenAIRE

    Houk, V N; Thacker, S B

    1989-01-01

    The Disabilities Prevention Program builds on traditional Centers for Disease Control (CDC) strengths in public health surveillance, epidemiology, and technology transfer to State and local governments in translating the findings of research into prevention programs. The objectives of the CDC program are to provide a national focus for the prevention of primary and secondary disabilities, build capacity at the State and community levels to maintain programs to prevent disabilities, and increa...

  1. Effectiveness of the tailored EBP training program for Filipino physiotherapists: a randomised controlled trial.

    Science.gov (United States)

    Dizon, Janine Margarita; Grimmer-Somers, Karen; Kumar, Saravana

    2011-04-13

    Evidence implementation continues to challenge health professionals most especially those from developing countries. Filipino physiotherapists represent a group of health professionals in a developing country who by tradition and historical practice, take direction from a doctor, on treatment options. Lack of autonomy in decision-making challenges their capacity to deliver evidence-based care. However, this scenario should not limit them from updating and up-skilling themselves on evidence- based practice (EBP). EBP training tailored to their needs and practice was developed to address this gap. This study will be conducted to assess the effectiveness of a tailored EBP-training program for Filipino physiotherapists, in improving knowledge, skills, attitudes and behaviour to EBP. Participation in this program aims to improve capacity to EBP and engage with referring doctors to determine the most effective treatments for their patients. A double blind randomised controlled trial, assessing the effectiveness of the EBP training intervention, compared with a waitlist control, will be conducted. An adequately powered sample of 54 physiotherapists from the Philippines will be recruited and randomly allocated to EBP intervention or waitlist control. The EBP program for Filipino physiotherapists is a one-day program on EBP principles and techniques, delivered using effective adult education strategies. It consists of lectures and practical workshops. A novel component in this program is the specially-developed recommendation form, which participants can use after completing their training, to assist them to negotiate with referring doctors regarding evidence-based treatment choices for their patients.Pre and post measures of EBP knowledge, skills and attitudes will be assessed in both groups using the Adapted Fresno Test and the Questions to EBP attitudes. Behaviour to EBP will be measured using activity diaries for a period of three months. Should the EBP-training program

  2. Self-Image Development: A Chicano Enfasis. Self-Programmed Counseling and Self-Programmed Control. Instructor's Guide = Desarrollo de la Imagen Propia: Enfasis en el Chicano. Sistema de Consejo y Control Auto-Programado. Manuel del Profesor.

    Science.gov (United States)

    Mireles, S. Raymond

    Self-Programmed Counseling, the instructor's guidance, and Self-Programmed Control (SPC), the student's response, was initially developed by Title III Project USTED (United Students and Teachers for Educational Development) for Mexican American students on academic probation to use on a non-credit, special group counseling basis. As part of a…

  3. Development and evaluation of a cancer-related fatigue patient education program: protocol of a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Görres Stefan

    2008-07-01

    Full Text Available Abstract Background Cancer-related fatigue (CRF and its impact on patients' quality of life has been an increasing subject of research. However, in Germany there is a lack of evidence-based interventions consistent with the multidimensional character of fatigue. The objective of this study is to develop and evaluate a self-management program for disease-free cancer patients to cope with CRF. Methods Based on evidence extracted from a literature review, a curriculum for the self-management program was elaborated. The curriculum was reviewed and validated by an interdisciplinary expert group and the training-modules will be pretested with a small number of participants and discussed in terms of feasibility and acceptance. To determine the efficacy of the program a randomised controlled trial will be carried out: 300 patients will be recruited from oncological practices in Bremen, Germany, and will be allocated to intervention or control group. The intervention group participates in the program, whereas the control group receives standard care and the opportunity to take part in the program after the end of the follow-up (waiting control group. Primary outcome measure is the level of fatigue, secondary outcome measures are quality of life, depression, anxiety, self-efficacy and physical activity. Data will be collected before randomisation, after intervention, and after a follow-up of 6 months. Discussion Because there are no comparable self-management programs for cancer survivors with fatigue, the development of the curriculum has been complex; therefore, the critical appraisal by the experts was an important step to validate the program and their contributions have been integrated into the curriculum. The experts appreciated the program as filling a gap in outpatient cancer care. If the results of the evaluation prove to be satisfactory, the outpatient care of cancer patients can be broadened and supplemented. Trial Registration Clinical

  4. A Telerehabilitation Program Improves Postural Control in Multiple Sclerosis Patients: A Spanish Preliminary Study

    Directory of Open Access Journals (Sweden)

    Rosa Ortiz-Gutiérrez

    2013-10-01

    Full Text Available Postural control disorders are among the most frequent motor disorder symptoms associated with multiple sclerosis. This study aims to demonstrate the potential improvements in postural control among patients with multiple sclerosis who complete a telerehabilitation program that represents a feasible alternative to physical therapy for situations in which conventional treatment is not available. Fifty patients were recruited. Control group (n = 25 received physiotherapy treatment twice a week (40 min per session. Experimental group (n = 25 received monitored telerehabilitation treatment via videoconference using the Xbox 360® and Kinect console. Experimental group attended 40 sessions, four sessions per week (20 min per session.The treatment schedule lasted 10 weeks for both groups. A computerized dynamic posturography (Sensory Organization Test was used to evaluate all patients at baseline and at the end of the treatment protocol. Results showed an improvement over general balance in both groups. Visual preference and the contribution of vestibular information yielded significant differences in the experimental group. Our results demonstrated that a telerehabilitation program based on a virtual reality system allows one to optimize the sensory information processing and integration systems necessary to maintain the balance and postural control of people with multiple sclerosis. We suggest that our virtual reality program enables anticipatory PC and response mechanisms and might serve as a successful therapeutic alternative in situations in which conventional therapy is not readily available.

  5. A Telerehabilitation Program Improves Postural Control in Multiple Sclerosis Patients: A Spanish Preliminary Study

    Science.gov (United States)

    Ortiz-Gutiérrez, Rosa; Cano-de-la-Cuerda, Roberto; Galán-del-Río, Fernando; Alguacil-Diego, Isabel María; Palacios-Ceña, Domingo; Miangolarra-Page, Juan Carlos

    2013-01-01

    Postural control disorders are among the most frequent motor disorder symptoms associated with multiple sclerosis. This study aims to demonstrate the potential improvements in postural control among patients with multiple sclerosis who complete a telerehabilitation program that represents a feasible alternative to physical therapy for situations in which conventional treatment is not available. Fifty patients were recruited. Control group (n = 25) received physiotherapy treatment twice a week (40 min per session). Experimental group (n = 25) received monitored telerehabilitation treatment via videoconference using the Xbox 360® and Kinect console. Experimental group attended 40 sessions, four sessions per week (20 min per session).The treatment schedule lasted 10 weeks for both groups. A computerized dynamic posturography (Sensory Organization Test) was used to evaluate all patients at baseline and at the end of the treatment protocol. Results showed an improvement over general balance in both groups. Visual preference and the contribution of vestibular information yielded significant differences in the experimental group. Our results demonstrated that a telerehabilitation program based on a virtual reality system allows one to optimize the sensory information processing and integration systems necessary to maintain the balance and postural control of people with multiple sclerosis. We suggest that our virtual reality program enables anticipatory PC and response mechanisms and might serve as a successful therapeutic alternative in situations in which conventional therapy is not readily available. PMID:24185843

  6. Estimating the Impacts of Direct Load Control Programs Using GridPIQ, a Web-Based Screening Tool

    Energy Technology Data Exchange (ETDEWEB)

    Pal, Seemita; Thayer, Brandon L.; Barrett, Emily L.; Studarus, Karen E.

    2017-11-13

    In direct load control (DLC) programs, utilities can curtail the demand of participating loads to contractually agreed-upon levels during periods of critical peak load, thereby reducing stress on the system, generation cost, and required transmission and generation capacity. Participating customers receive financial incentives. The impacts of implementing DLC programs extend well beyond peak shaving. There may be a shift of load proportional to the interrupted load to the times before or after a DLC event, and different load shifts have different consequences. Tools that can quantify the impacts of such programs on load curves, peak demand, emissions, and fossil fuel costs are currently lacking. The Grid Project Impact Quantification (GridPIQ) screening tool includes a Direct Load Control module, which takes into account project-specific inputs as well as the larger system context in order to quantify the impacts of a given DLC program. This allows users (utilities, researchers, etc.) to test and compare different program specifications and their impacts.

  7. Phytosanitary treatments against Bactrocera dorsalis(Diptera: Tephritidae): current situation and future prospects

    Science.gov (United States)

    Bactrocera dorsalis(Hendel)(Diptera: Tephritidae) is arguably the most important tephritid attacking fruits after Ceratitis capitata(Wiedemann)(Diptera: Tephritidae). In 2003, it was found in Africa and quickly spread to most of the sub-Saharan part of the continent destroying fruits and creating re...

  8. Effectiveness of a sprayable male annihilation treatment with a biopesticide against fruit flies (Diptera:Tephritidae) attacking tropical fruits

    Science.gov (United States)

    SPLAT-MAT Spinosad ME(aka STATIC Spinosad ME),an "attract and kill" sprayable biopesticide, was evaluated as an area wide suppression treatment against Bactrocera carambolae(Drew & Hancock),carambola fruit fly, in Brazil and Bactrocera dorsalis(Hendel),oriental fruit fly, in Hawaii. In Brazil, a sin...

  9. 76 FR 56982 - Announcement of Federal Underground Injection Control (UIC) Class VI Program for Carbon Dioxide (CO2

    Science.gov (United States)

    2011-09-15

    ...-9465-1] Announcement of Federal Underground Injection Control (UIC) Class VI Program for Carbon Dioxide... Injection Control (UIC) Class VI Program for Carbon Dioxide (CO 2 ) Geologic Sequestration (GS) Wells under... highlighted in the ``Report of the Interagency Task Force on Carbon Capture and Storage'' (August 2010), it is...

  10. Impulsive Control for Continuous-Time Markov Decision Processes: A Linear Programming Approach

    Energy Technology Data Exchange (ETDEWEB)

    Dufour, F., E-mail: dufour@math.u-bordeaux1.fr [Bordeaux INP, IMB, UMR CNRS 5251 (France); Piunovskiy, A. B., E-mail: piunov@liv.ac.uk [University of Liverpool, Department of Mathematical Sciences (United Kingdom)

    2016-08-15

    In this paper, we investigate an optimization problem for continuous-time Markov decision processes with both impulsive and continuous controls. We consider the so-called constrained problem where the objective of the controller is to minimize a total expected discounted optimality criterion associated with a cost rate function while keeping other performance criteria of the same form, but associated with different cost rate functions, below some given bounds. Our model allows multiple impulses at the same time moment. The main objective of this work is to study the associated linear program defined on a space of measures including the occupation measures of the controlled process and to provide sufficient conditions to ensure the existence of an optimal control.

  11. Consumer preferences in format and type of community-based weight control programs.

    Science.gov (United States)

    Sherwood, N E; Morton, N; Jeffery, R W; French, S A; Neumark-Sztainer, D; Falkner, N H

    1998-01-01

    The purpose of this study was to provide further information about preferences for types and formats (e.g., correspondence vs. face to face) of eating and exercise programs, actual participation rates in a variety of offered programs, and characteristics of program participants vs. nonparticipants. Over a 3-year period, a large sample of community volunteers was given the opportunity to participate in various forms of diet and exercise programs as part of a weight gain prevention study. The study was conducted at a university and three local health department sites. Subjects in the study were 616 individuals participating in the Pound of Prevention study (POP), a 3-year randomized evaluation of an intervention for preventing weight gain. The primary outcomes assessed were participation rates for each program offering. Program participants were also compared to those who did not participate on demographic characteristics, smoking, diet behavior, exercise behavior, and weight concern. Survey results indicated that correspondence formats for delivery of health education programs were rated as more desirable than face-to-face formats. Participation for program offering ranged from 0 to 16% of the study population. Participation data were consistent with survey results and showed participants' preference for correspondence formats even more strongly. Program offering attracted health-conscious participants with higher education and income levels. These data suggest that some community members will get interested and take part in low-cost, minimal contact programs for exercise and weight control. Future research efforts should focus on investigating ways to increase participation in brief or minimal contact programs, particularly among groups that may be difficult to reach and at high risk for the development of obesity.

  12. The development of SisterTalk: a cable TV-delivered weight control program for black women.

    Science.gov (United States)

    Gans, Kim M; Kumanyika, Shiriki K; Lovell, H Joan; Risica, Patricia M; Goldman, Roberta; Odoms-Young, Angela; Strolla, Leslie O; Decaille, Donna O; Caron, Colleen; Lasater, Thomas M

    2003-12-01

    Overweight and obesity have reached epidemic proportions in the United States, with black women disproportionately affected. SisterTalk is a weight control program designed specifically for delivery to black women via cable TV. The theoretical and conceptual frameworks and formative research that guided the development and cultural tailoring of SisterTalk are described. Social Action Theory was applied in the development of SisterTalk along with a detailed behavioral analysis of the way that black women view weight and weight loss within the context of their cultural and social realities. The entire intervention development process was framed using this information, rather than by changing only superficial aspects of program delivery. Community networking and both qualitative and quantitative interview techniques from the fields of social marketing and cultural anthropology were used to involve black women from Boston in the design and implementation of a program that would be practical, appealing, and culturally sensitive. Also discussed are strategies for evaluating the program, and lessons learned that might have broader applicability are highlighted. The development of the SisterTalk program could provide a useful starting point for development of successful weight control programs for black women in other parts of the United States as well as for other ethnic and racial groups.

  13. A Case Study on Cyber-security Program for the Programmable Logic Controller of Modern NPPs

    International Nuclear Information System (INIS)

    Song, S. H.; Lee, M. S.; Kim, T. H.; Park, C. H.; Park, S. P.; Kim, H. S.

    2014-01-01

    As instrumentation and control (I and C) systems for modern Nuclear Power Plants (NPPs) have been digitalized to cope with their growing complexity, the cyber-security has become an important issue. To protect the I and C systems adequately from cyber threats, such as Stuxnet that attacked Iran's nuclear facilities, regulations of many countries require a cyber-security program covering all the life cycle phases of the system development, from the concept to the retirement. This paper presents a case study of cyber-security program that has been performed during the development of the programmable logic controller (PLC) for modern NPPs of Korea. In the case study, a cyber-security plan, including technical, management, and operational controls, was established through a security risk assessment. Cyber-security activities, such as development of security functions and periodic inspections, were conducted according to the plan: the security functions were applied to the PLC as the technical controls, and periodic inspections and audits were held to check the security of the development environment, as the management and operational controls. A final penetration test was conducted to inspect all the security problems that had been issued during the development. The case study has shown that the systematic cyber-security program detected and removed the vulnerabilities of the target system, which could not be found otherwise, enhancing the cyber-security of the system

  14. A Case Study on Cyber-security Program for the Programmable Logic Controller of Modern NPPs

    Energy Technology Data Exchange (ETDEWEB)

    Song, S. H. [Korea University, Seoul (Korea, Republic of); Lee, M. S.; Kim, T. H. [Formal Work Inc., Seoul (Korea, Republic of); Park, C. H. [LINE Corp., Tokyo (Japan); Park, S. P. [Ahnlab Inc., Seoul (Korea, Republic of); Kim, H. S. [Sejong University, Seoul (Korea, Republic of)

    2014-08-15

    As instrumentation and control (I and C) systems for modern Nuclear Power Plants (NPPs) have been digitalized to cope with their growing complexity, the cyber-security has become an important issue. To protect the I and C systems adequately from cyber threats, such as Stuxnet that attacked Iran's nuclear facilities, regulations of many countries require a cyber-security program covering all the life cycle phases of the system development, from the concept to the retirement. This paper presents a case study of cyber-security program that has been performed during the development of the programmable logic controller (PLC) for modern NPPs of Korea. In the case study, a cyber-security plan, including technical, management, and operational controls, was established through a security risk assessment. Cyber-security activities, such as development of security functions and periodic inspections, were conducted according to the plan: the security functions were applied to the PLC as the technical controls, and periodic inspections and audits were held to check the security of the development environment, as the management and operational controls. A final penetration test was conducted to inspect all the security problems that had been issued during the development. The case study has shown that the systematic cyber-security program detected and removed the vulnerabilities of the target system, which could not be found otherwise, enhancing the cyber-security of the system.

  15. Pilot study comparing changes in postural control after training using a video game balance board program and 2 standard activity-based balance intervention programs.

    Science.gov (United States)

    Pluchino, Alessandra; Lee, Sae Yong; Asfour, Shihab; Roos, Bernard A; Signorile, Joseph F

    2012-07-01

    To compare the impacts of Tai Chi, a standard balance exercise program, and a video game balance board program on postural control and perceived falls risk. Randomized controlled trial. Research laboratory. Independent seniors (N=40; 72.5±8.40) began the training, 27 completed. Tai Chi, a standard balance exercise program, and a video game balance board program. The following were used as measures: Timed Up & Go, One-Leg Stance, functional reach, Tinetti Performance Oriented Mobility Assessment, force plate center of pressure (COP) and time to boundary, dynamic posturography (DP), Falls Risk for Older People-Community Setting, and Falls Efficacy Scale. No significant differences were seen between groups for any outcome measures at baseline, nor were significant time or group × time differences for any field test or questionnaire. No group × time differences were seen for any COP measures; however, significant time differences were seen for total COP, 3 of 4 anterior/posterior displacement and both velocity, and 1 displacement and 1 velocity medial/lateral measure across time for the entire sample. For DP, significant improvements in the overall score (dynamic movement analysis score), and in 2 of the 3 linear and angular measures were seen for the sample. The video game balance board program, which can be performed at home, was as effective as Tai Chi and the standard balance exercise program in improving postural control and balance dictated by the force plate postural sway and DP measures. This finding may have implications for exercise adherence because the at-home nature of the intervention eliminates many obstacles to exercise training. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  16. Coastal nonpoint pollution control program: Program development and approval guidance

    International Nuclear Information System (INIS)

    1993-01-01

    The document, developed by NOAA and EPA, contains guidance for states in developing and implementing their coastal nonpoint pollutant source programs. It describes the requirements that must be met, including: the geographic scope of the program; the pollutant sources to be addressed; the types of management measures used; the establishment of critical areas; technical assistance, public participation, and administrative coordination; and, the process for program submission and Federal approval. The document also contains the criteria by which NOAA and EPA will review the states' submissions

  17. Oak Ridge National Laboratory Radiation Control Program - Partners in Site Restoration

    International Nuclear Information System (INIS)

    Jones, S. L.; Stafford, M. W.

    2002-01-01

    In 1998, the U.S. Department of Energy (DOE) awarded the Management and Integration (M and I) contract for all five of the Oak Ridge Operations (ORO) facilities to Bechtel Jacobs Company LLC (BJC). At Oak Ridge National Laboratory (ORNL), a world renowned national laboratory and research and development facility, the BJC mission involves executing the DOE Environmental Management (EM) program. In addition to BJC's M and I contract, UT-Battelle, LLC, a not-for-profit company, is the Management and Operating (M and O) contractor for DOE on the ORNL site. As part of ORNL's EM program, legacy inactive facilities (i.e., reactors, nuclear material research facilities, burial grounds, and underground storage tanks) are transferred to BJC and are designated as remediation, decontamination and decommissioning (D and D), or long-term surveillance and maintenance (S and M) facilities. Facilities operated by both UT-Battelle and BJC are interspersed throughout the site and are usually in close proximity. Both UT-Battelle and BJC have DOE-approved Radiation Protection Programs established in accordance with 10 CFR 835. The BJC Radiological Control (RADCON) Program adapts to the M and I framework and is comprised of a combination of subcontracted program responsibilities with BJC oversight. This paper focuses on the successes and challenges of executing the BJC RADCON Program for BJC's ORNL Project through a joint M and I contractor relationship, while maintaining a positive working relationship and partnership with UT-Battelle's Radiation Protection organization

  18. The international atom: evolution of radiation control programs.

    Science.gov (United States)

    Bradley, F J

    2002-07-01

    Under the Atoms for Peace program, Turkey received a one MWt swimming pool reactor in 1962 that initiated a health physics program for the reactor and a Radiation Control Program (RCP) for the country's use of ionizing radiation. Today, over 13,000 radiation workers, concentrated in the medical field, provide improved medical care with 6,200 x-ray units, including 494 CAT scanners, 222 radioimmunoassay (RIA) labs and 42 radiotherapy centers. Industry has a large stake in the safe use of ionizing radiation with over 1,200 x-ray and gamma radiography and fluoroscopic units, 2,500 gauges in automated process control and five irradiators. A 48-person RCP staff oversees this expanded radiation use. One incident involving a spent 3.3 TBq (88 Ci) 60Co source resulted in 10 overexposures but no fatalities. Taiwan received a 1.6 MWt swimming pool reactor in 1961 and rapidly applied nuclear technology to the medical and industrial fields. Today, there are approximately 24,000 licensed radiation workers in nuclear power field, industry, medicine and academia. Four BWRs and two PWRs supply about 25% of the island's electrical power needs. One traumatic event galvanized the RCP when an undetermined amount of 60Co was accidentally incorporated into reinforcing bars, which in turn were incorporated into residential and commercial buildings. Public exposures were estimated to range up to 15 mSv (1.3 rem) per annum. There were no reported ill effects, except possibly psychological, to date. The RCP now has instituted stringent control measures to ensure radiation-free dwellings and work places. Albania's RCP is described as it evolved since 1972. Regulations were promulgated which followed the IAEA Basic Safety Standards of that era. With 525 licenses and 600 radiation workers, the problem was not in the regulations per se but in their enforcement. The IAEA helped to upgrade the RCP as the economy evolved from one that was centrally planned economy to a free market economy. As this

  19. Variable Displacement Control of the Concrete Pumping System Based on Dynamic Programming

    Directory of Open Access Journals (Sweden)

    Ye Min

    2017-01-01

    Full Text Available To solve the problems of cylinder piston striking cylinder and the hydraulic shocking of the main pump, and causing energy waste problem, the method of variable displacement control of piston stroke was proposed. In order to achieve effective control of the piston stroke, variable displacement control model was established under the physical constraint condition of non-collision between piston and cylinder. And the control process was realized by Dynamic Programming(DP, the simulation and test results show that piston of concrete pumping system don’t strike cylinder and reduce the hydraulic shock of the main pump outlet, meanwhile improve the response speed of the cylinder and achieve energy-saving purposes under varying loads. This control model built in the integration design space of structure variable and control variable is of guiding significance for solving open-loop system’s engineering problems.

  20. The Swift Project Contamination Control Program: A Case Study of Balancing Cost, Schedule and Risk

    Science.gov (United States)

    Hansen, Patricia A.; Day, Diane T.; Secunda, Mark S.; Rosecrans, Glenn P.

    2004-01-01

    The Swift Observatory will be launched in early 2004 to examine the dynamic process of gamma ray burst (GRB) events. The multi-wavelength Observatory will study the GRB afterglow characteristics, which will help to answer fundamental questions about both the structure and the evolution of the universe. The Swift Observatory Contamination Control Program has been developed to aid in ensuring the success of the on-orbit performance of two of the primary instruments: the Ultraviolet and Optical Telescope (UVOT) and the X-Ray Telescope (XRT). During the design phase of the Observatory, the contamination control program evolved and trade studies were performed to assess the risk of contaminating the sensitive UVOT and XRT optics during both pre-launch testing and on-orbit operations, within the constraints of the overall program cost and schedule.

  1. Stochastic optimal control in infinite dimension dynamic programming and HJB equations

    CERN Document Server

    Fabbri, Giorgio; Święch, Andrzej

    2017-01-01

    Providing an introduction to stochastic optimal control in infinite dimension, this book gives a complete account of the theory of second-order HJB equations in infinite-dimensional Hilbert spaces, focusing on its applicability to associated stochastic optimal control problems. It features a general introduction to optimal stochastic control, including basic results (e.g. the dynamic programming principle) with proofs, and provides examples of applications. A complete and up-to-date exposition of the existing theory of viscosity solutions and regular solutions of second-order HJB equations in Hilbert spaces is given, together with an extensive survey of other methods, with a full bibliography. In particular, Chapter 6, written by M. Fuhrman and G. Tessitore, surveys the theory of regular solutions of HJB equations arising in infinite-dimensional stochastic control, via BSDEs. The book is of interest to both pure and applied researchers working in the control theory of stochastic PDEs, and in PDEs in infinite ...

  2. Impact of a diabetes disease management program on diabetes control and patient quality of life.

    Science.gov (United States)

    Rasekaba, Tshepo Mokuedi; Graco, Marnie; Risteski, Chrissie; Jasper, Andrea; Berlowitz, David J; Hawthorne, Graeme; Hutchinson, Anastasia

    2012-02-01

    The worldwide burden of diabetes is projected to be 5.4% of the adult population by the year 2025. Diabetes is associated with multiple medical complications that both decrease health-related quality of life (HR-QOL) and contribute to earlier mortality. There is growing evidence for the effectiveness of multidisciplinary disease management programs that incorporate self-management principles in improving patients' long-term outcomes. The aim of this project was to evaluate the effectiveness of this approach in improving: (1) glycemic control measured by HbA1c, and (2) HR-QOL measured by the Assessment of Quality of Life (AQOL), at enrollment and at 12-months follow-up. Between 2004 and 2008, a total of 967 patients were enrolled in the program; 545 (56%) of these patients had HbA1c data available at baseline and at 12 months. Mean HbA1c at enrollment was 8.6% (SD 1.9) versus 7.3% (SD 1.2) at 12 months (Pmanagement program for patients with poorly controlled type 2 diabetes can improve both glycemic control and HR-QOL.

  3. Surveying managers to inform a regionally relevant invasive Phragmites australis control research program.

    Science.gov (United States)

    Rohal, C B; Kettenring, K M; Sims, K; Hazelton, E L G; Ma, Z

    2018-01-15

    Managers of invasive species consider the peer-reviewed literature only moderately helpful for guiding their management programs. Though this "knowing-doing gap" has been well-described, there have been few efforts to guide scientists in how to develop useful and usable science. Here we demonstrate how a comprehensive survey of managers (representing 42 wetland management units across the Great Salt Lake watershed) can highlight management practices and challenges (here for the widespread invasive plant, Phragmites australis, a recent and aggressive invader in this region) to ultimately inform a research program. The diversity of surveyed organizations had wide-ranging amounts of Phragmites which led to different goals and approaches including more aggressive control targets and a wider array of control tools for smaller, private organizations compared to larger government-run properties. We found that nearly all managers (97%) used herbicide as their primary Phragmites control tool, while burning (65%), livestock grazing (49%), and mowing (43%) were also frequently used. Managers expressed uncertainties regarding the timing of herbicide application and type of herbicide for effective control. Trade-offs between different Phragmites treatments were driven by budgetary concerns, as well as environmental conditions like water levels and social constraints like permitting issues. Managers had specific ideas about the plant communities they desired following Phragmites control, yet revegetation of native species was rarely attempted. The results of this survey informed the development of large-scale, multi-year Phragmites control and native plant revegetation experiments to address management uncertainties regarding herbicide type and timing. The survey also facilitated initial scientist-manager communication, which led to collaborations and knowledge co-production between managers and researchers. An important outcome of the survey was that experimental results were

  4. Using GPS instruments and GIS techniques in data management for insect pest control programs

    International Nuclear Information System (INIS)

    2006-01-01

    This interactive tutorial CD entitled 'Using GPS Instruments and GIS Techniques in Data Management for Insect Pest Control Programs' was developed by Micha silver of the Arava Development Co., Sapir, Israel, and includes step-by-step hands on lessons on the use of GPS/GIS in support of area-wide pest control operations

  5. The PLE(2)NO self-management and exercise program for knee osteoarthritis: Study Protocol for a Randomized Controlled Trial.

    Science.gov (United States)

    Marconcin, Priscila; Espanha, Margarida; Yázigi, Flávia; Campos, Pedro

    2016-06-07

    International recommendations suggest exercise and self-management programs, including non-pharmacological treatments, for knee osteoarthritis (KOA) because they can benefit pain relief and improve function and exercise adherence. The implementation of a combined self-management and exercise program termed PLE(2)NO may be a good method for controlling KOA symptoms because it encourages the development of self-efficacy to manage the pathology. This study will assess the effects of a self-management and exercise program in comparison to an educational intervention (control program) on symptoms, physical fitness, health-related quality of life, self-management behaviors, self-efficacy, physical activity level and coping strategies. This PLE(2)NO study is a single-blinded, randomized controlled trial of elderly (aged above 60 yrs old) patients with clinical and radiographic KOA. The patients will be allocated into either an educational group (control) or a self-management and exercise group (experimental). All participants will receive a supplement of chondroitin and glucosamine sulfates. This paper describes the protocol that will be used in the PLE(2)NO program. This program has several strengths. First, it involves a combination of self-management and exercise approaches, is available in close proximity to the patients and occurs over a short period of time. The latter two characteristics are crucial for maintaining participant adherence. Exercise components will be implemented using low-cost resources that permit their widespread application. Moreover, the program will provide guidance regarding the effectiveness of using a self-management and exercise program to control KOA symptoms and improve self-efficacy and health-related quality of life. NCT02562833 (09/23/2015).

  6. Water pollution control in river basin by interactive fuzzy interval multiobjective programming

    Energy Technology Data Exchange (ETDEWEB)

    Chang, N.B.; Chen, H.W. [National Cheng-Kung Univ., Tainan (Taiwan, Province of China). Dept. of Environmental Engineering; Shaw, D.G.; Yang, C.H. [Academia Sinica, Taipei (Taiwan, Province of China). Inst. of Economics

    1997-12-01

    The potential conflict between protection of water quality and economic development by different uses of land within river basins is a common problem in regional planning. Many studies have applied multiobjective decision analysis under uncertainty to problems of this kind. This paper presents the interactive fuzzy interval multiobjective mixed integer programming (IFIMOMIP) model to evaluate optimal strategies of wastewater treatment levels within a river system by considering the uncertainties in decision analysis. The interactive fuzzy interval multiobjective mixed integer programming approach is illustrated in a case study for the evaluation of optimal wastewater treatment strategies for water pollution control in a river basin. In particular, it demonstrates how different types of uncertainty in a water pollution control system can be quantified and combined through the use of interval numbers and membership functions. The results indicate that such an approach is useful for handling system complexity and generating more flexible policies for water quality management in river basins.

  7. Programs and resources for control of job stress in the Federal workplace

    Science.gov (United States)

    Joice, Wendell

    1993-01-01

    A couple of weeks ago, the American Psychological Association and the National Institute of Occupational Safety and Health held a conference in Washingtion, D.C. entitled 'Stress in the 90's'. At this conference the Office of Personnel Management (OPM) conducted a session on 'Programs and Resources for the Control of Job Stress in the Federal Workplace'. I am going to present an overview of that three-hour session and some related information from the conference. My discussion covers stress terminology and models, selected programs and resources, evaluation research, some concerns about our progress, and plans to expand our efforts at OPM.

  8. Labeling programs and efficiency standards to control the energy consumption of household appliances: current situation, main results and recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Menanteau, Ph.

    2000-09-01

    To control the rise in electricity consumption for specific uses, the industrialized countries started by introducing special programs aimed at improving energy efficiency. Among the different instruments available, labeling programs and minimum energy performance standards (MEPS) have proved to be very effective. The first part of this document presents the current situation, the main results and recommendations concerning the labeling programs and efficiency standards to control the energy consumption of household appliances. This analyze is done for each country in details providing the name of the program or measure, the date of implementation, the objective and the main characteristics of the program, the impacts and evaluation. (A.L.B.)

  9. Demand controllers with optimized programing; Controladores de demanda com programacao otimizada

    Energy Technology Data Exchange (ETDEWEB)

    Santos, A.H.M.; Haddad, J.; Almeida, A.T.L. [Escola Federal de Engenharia de Itajuba, MG (Brazil); Devienne, R.F. [Universidade de Taubate (UNITAU), SP (Brazil)

    1995-12-31

    This work presents a methodological proposal for load re-allocation strategy in opposition to the empiric methodology presently used by demand controllers. Through the utilization of dynamic programing techniques associated to fuzzy theory it is possible to modulate the electric power consumers load curve, incorporating different objectives resulting in the global energy consumption rationing 6 figs., 5 tabs., 8 refs.

  10. Cyber Security Testing and Training Programs for Industrial Control Systems

    Energy Technology Data Exchange (ETDEWEB)

    Daniel Noyes

    2012-03-01

    Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These trainings vary from web-based cyber security trainings for control systems engineers to more advanced hands-on training that culminates with a Red Team/ Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors.

  11. Carboy Security Testing and Training Programs for Industrial Control Systems

    International Nuclear Information System (INIS)

    Noyes, Daniel

    2012-01-01

    Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These training vary from web-based cyber security training for control systems engineers to more advanced hands-on training that culminates with a Red Team/Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors

  12. Cyber Security Testing and Training Programs for Industrial Control Systems

    International Nuclear Information System (INIS)

    Noyes, Daniel

    2012-01-01

    Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These trainings vary from web-based cyber security trainings for control systems engineers to more advanced hands-on training that culminates with a Red Team/ Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors.

  13. Carboy Security Testing and Training Programs for Industrial Control Systems

    Energy Technology Data Exchange (ETDEWEB)

    Noyes, Daniel [Idaho National Laboratory, Idaho (United States)

    2012-03-15

    Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These training vary from web-based cyber security training for control systems engineers to more advanced hands-on training that culminates with a Red Team/Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors.

  14. [Family planning programs and birth control in the third world].

    Science.gov (United States)

    Wohlschlagl, H

    1991-01-01

    The population explosion has been abating since the 2nd half of the 1960s. The birth rate of the 3rd World dropped from 45/1000 during 1950-55 to 31/1000 during 1985-90. From the 1st half of the 1960s to the 1st half of the 1980s the total fertility of such countries dropped from 6.1 to 4.2 children/woman. In Taiwan, Singapore, Hong Kong, South Korea, and Malaysia living standards improved as a result of industrialization, and fertility decreased significantly. In Sri Lanka, China, North Vietnam, and Thailand the drop of fertility is explained by cultural and religious factors. In 1982 about 78% of the population of developing countries lived in 39 states that followed an official policy aimed at reducing the population. Another 16% lived in countries supporting the concept of a desired family size. However, World Bank data showed that in the mid-1980s in 27 developing countries no state family planning (FP) programs existed. India adopted an official FP program in 1952, Pakistan followed suit in 1960, South Korea in 1961, and China in 1962. In Latin America a split policy manifested itself: in Brazil birth control was rejected, only Colombia had a FP policy. In 1986 the governments of 68 of 131 developing countries representing 3.1 billion people considered the number of children per woman too high. 31 of these countries followed concrete population control policies. On the other hand, in 1986 24 countries of Africa with 40% of the continent's population took no measures to influence population growth. In Latin America and the Caribbean 18 of 33 countries were idle, except for Mexico that had a massive state FP program. These programs also improve maternal and child health with birth spacing of at least 2 years, and the prevention of pregnancies of too young women or those over 40. The evaluation of rapidly spreading FP programs in the 1970s was carried out by the World Fertility Survey in 41 countries. The impact of FP programs was more substantial than

  15. The evaluation of water hyacinth (Eichhornia crassiper) control program in Rawapening Lake, Central Java Indonesia

    Science.gov (United States)

    Hidayati, N.; Soeprobowati, T. R.; Helmi, M.

    2018-03-01

    The existence of water hyacinths and other aquatic plants have been a major concern in Rawapening Lake for many years. Nutrient input from water catchment area and fish feed residues suspected to leads eutrophication, a condition that induces uncontrolled growth of aquatic plants. In dry season, aquatic plants cover almost 70% of lake area. This problem should be handled properly due to wide range of lake function such as water resources, fish farming, power plants, flood control, irrigation and many other important things. In 2011, Rawapening Lake was appointed as pilot project of Save Indonesian Lake Movement: the Indonesian movement for lakes ecosystem conservation and rehabilitation. This project consists of 6 super priority programs and 11 priority programs. This paper will evaluate the first super priority program which aims to control water hyacinth bloom. Result show that the three indicators in water hyacinth control program was not achieved. The coverage area of Water hyacinth was not reduced, tend to increase during period 2012 to 2016. We suggesting better coordination should be performed in order to avoid policies misinterpretation and to clarify the authority from each institution. We also give a support to the establishment of lake zonation plan and keep using all the three methods of cleaning water hyacinth with a maximum population remained at 20%.

  16. Effectiveness of a universal health-promoting parenting program: a randomized waitlist-controlled trial of All Children in Focus.

    Science.gov (United States)

    Ulfsdotter, Malin; Enebrink, Pia; Lindberg, Lene

    2014-10-18

    Parenting programs have been highlighted as a way of supporting and empowering parents. As programs designed to promote children's health and well-being are scarce, a new health-promotion program, All Children in Focus, has been developed. The purpose of this trial was to evaluate the potential effectiveness of the program in promoting parental self-efficacy and child health and development, as well as to investigate possible moderators of these outcomes. A multicenter randomized waitlist-controlled trial was conducted. The trial included 621 parents with children aged 3-12 years. Parents were randomized to receive the intervention directly or to join a waitlist control group. Parents completed questionnaires at baseline, 2 weeks after the intervention, and 6 months post-baseline. To evaluate potential effects of the program, as well as any moderating variables, multilevel modeling with a repeated-measures design was applied. Parents in the intervention group reported that their self-efficacy (p parents in the control group. One variable was found to moderate both outcomes: parents' positive mental health. Furthermore, parents' educational level and number of children moderated parental self-efficacy, while the children's age moderated child health and development. Having a poor positive mental health, a university-level education, more than one child in the family, and older children, made the families benefit more. In the first randomized controlled trial of All Children in Focus, we found that the program appears to promote both parental self-efficacy and children's health and development in a general population. Additionally, we found that families may benefit differently depending on their baseline characteristics. This contributes to an existing understanding of the advantages of offering universal parenting programs as a public health approach to strengthening families. However, further research is needed to investigate long-term effects and mediating

  17. The Impact of the Project K Youth Development Program on Self-Efficacy: A Randomized Controlled Trial.

    Science.gov (United States)

    Deane, Kelsey L; Harré, Niki; Moore, Julie; Courtney, Matthew G R

    2017-03-01

    A key issue for youth development programs is whether the learning they provide is transferred to participants' daily lives. It is also important that they are effective for the diverse range of participants they attract. This study used a randomized controlled trial design to measure the impact of Project K, a New Zealand-based youth development program, on academic and social self-efficacy. Project K combines a 3-week wilderness adventure, a 10 day community service component, and 1 year of mentoring to promote positive growth in 14-15 year olds with low self-efficacy. At baseline, the evaluation included 600 Project K (46 % female) and 577 Control participants (48 % female) and revealed that Project K was effective in improving both social and academic self-efficacy from pre- to post-program with effects being sustained 1 year later. Parents' perceptions of changes in the participants' interpersonal skills supported these findings. Differential program effects were found across participant subgroups, particularly 1 year after program completion. The implications of these differences are discussed.

  18. Resource control of object-oriented programs

    OpenAIRE

    Marion, Jean-Yves; Pechoux, Romain

    2007-01-01

    International audience; A sup-interpretation is a tool which provides an upper bound on the size of a value computed by some symbol of a program. Sup-interpretations have shown their interest to deal with the complexity of first order functional programs. For instance, they allow to characterize all the functions bitwise computable in \\texttt{Alogtime}. This paper is an attempt to adapt the framework of sup-interpretations to a fragment of oriented-object programs, including distinct encoding...

  19. Transcriptional Programs Controlling Perinatal Lung Maturation

    Science.gov (United States)

    Xu, Yan; Wang, Yanhua; Besnard, Valérie; Ikegami, Machiko; Wert, Susan E.; Heffner, Caleb; Murray, Stephen A.; Donahue, Leah Rae; Whitsett, Jeffrey A.

    2012-01-01

    The timing of lung maturation is controlled precisely by complex genetic and cellular programs. Lung immaturity following preterm birth frequently results in Respiratory Distress Syndrome (RDS) and Broncho-Pulmonary Dysplasia (BPD), which are leading causes of mortality and morbidity in preterm infants. Mechanisms synchronizing gestational length and lung maturation remain to be elucidated. In this study, we designed a genome-wide mRNA expression time-course study from E15.5 to Postnatal Day 0 (PN0) using lung RNAs from C57BL/6J (B6) and A/J mice that differ in gestational length by ∼30 hr (B6controlling lung maturation. We identified both temporal and strain dependent gene expression patterns during lung maturation. For time dependent changes, cell adhesion, vasculature development, and lipid metabolism/transport were major bioprocesses induced during the saccular stage of lung development at E16.5–E17.5. CEBPA, PPARG, VEGFA, CAV1 and CDH1 were found to be key signaling and transcriptional regulators of these processes. Innate defense/immune responses were induced at later gestational ages (E18.5–20.5), STAT1, AP1, and EGFR being important regulators of these responses. Expression of RNAs associated with the cell cycle and chromatin assembly was repressed during prenatal lung maturation and was regulated by FOXM1, PLK1, chromobox, and high mobility group families of transcription factors. Strain dependent lung mRNA expression differences peaked at E18.5. At this time, mRNAs regulating surfactant and innate immunity were more abundantly expressed in lungs of B6 (short gestation) than in A/J (long gestation) mice, while expression of genes involved in chromatin assembly and histone modification were expressed at lower levels in B6 than in A/J mice. The present study systemically mapped key regulators, bioprocesses, and transcriptional networks controlling lung maturation, providing the basis for new therapeutic strategies to enhance lung function in preterm

  20. 78 FR 23246 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2013-04-18

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9804-8] Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for Exemption--Class I Hazardous Waste Injection; BASF... exemption to the land disposal Restrictions, under the 1984 Hazardous and Solid Waste [[Page 23247...

  1. Asia Oceania Guidelines for the Implementation of Programs for Cervical Cancer Prevention and Control

    Directory of Open Access Journals (Sweden)

    Hextan Y. S. Ngan

    2011-01-01

    The primary purpose of these guidelines is to provide information on scientific evidence on the different modalities and approaches of cervical cancer prevention programs, for high resource and low resource settings. The secondary purpose is to provide an overview of the current situation of cervical cancer control and prevention in various Asian Oceania countries: their views of an ideal program, identified obstacles, and suggestions to overcome them are discussed.

  2. Strengthening cancer biology research, prevention, and control while reducing cancer disparities: student perceptions of a collaborative master's degree program in cancer biology, preventions, and control.

    Science.gov (United States)

    Jillson, I A; Cousin, C E; Blancato, J K

    2013-09-01

    This article provides the findings of a survey of previous and current students in the UDC/GU-LCCC master's degree program. This master's degree program, Cancer Biology, Prevention, and Control is administered and taught jointly by faculty of a Minority Serving Institution, the University of the District of Columbia, and the Lombardi Comprehensive Cancer Center to incorporate the strengths of a community-based school with a research intensive medical center. The program was initiated in 2008 through agreements with both University administrations and funding from the National Cancer Institute. The master's degree program is 36 credits with a focus on coursework in biostatistics, epidemiology, tumor biology, cancer prevention, medical ethics, and cancer outreach program design. For two semesters during the second year, students work full-time with a faculty person on a laboratory or outreach project that is a requirement for graduation. Students are supported and encouraged to transition to a doctoral degree after they obtain the master's and many of them are currently in doctorate programs. Since the inception of the program, 45 students have initiated the course of study, 28 have completed the program, and 13 are currently enrolled in the program. The survey was designed to track the students in their current activities, as well as determine which courses, program enhancements, and research experiences were the least and most useful, and to discern students' perceptions of knowledge acquired on various aspects of Cancer Biology Prevention, and Control Master's Program. Thirty of the 35 individuals to whom email requests were sent responded to the survey, for a response rate of 85.7%. The results of this study will inform the strengthening of the Cancer Biology program by the Education Advisory Committee. They can also be used in the development of comparable collaborative master's degree programs designed to address the significant disparities in prevalence of

  3. Improving the quality control program for patient dose calibrator according to IEC 60580

    International Nuclear Information System (INIS)

    Costa, Nathalia Almeida; Potiens, Maria da Penha Albuquerque

    2013-01-01

    The objective of this work was to improve the program quality control of this equipment based on the International Standard IEC 60580 - Medical electrical equipment - Dose area product meters . The initial program was established following the recommendations of IEC 61674 quoting dosimeters with ionization chambers and / or semiconductor detectors used in diagnostic X-ray image, however, the IEC 60580 is referred specifically to gauges and KAP (kerma-area product) presents additional tests. Tests included: intrinsic relative error, repeatability, scanning resolution, settling time, restarting, float values, response time and spatial uniformity of response. As a rule, all measurements are within the range characteristic of equipment performance. Thus, the PDC (Patient Dose Calibrator) again shows a device with excellent functionality and reliability in characterization tests carried out to quality control as( for the test in clinical PKA meters

  4. Control of Angra 1' PZR by a fuzzy rule base build through genetic programming

    International Nuclear Information System (INIS)

    Caldas, Gustavo Henrique Flores; Schirru, Roberto

    2002-01-01

    There is an optimum pressure for the normal operation of nuclear power plant reactors and thresholds that must be respected during transients, what make the pressurizer an important control mechanism. Inside a pressurizer there are heaters and a shower. From their actuation levels, they control the vapor pressure inside the pressurizer and, consequently, inside the primary circuit. Therefore, the control of the pressurizer consists in controlling the actuation levels of the heaters and of the shower. In the present work this function is implemented through a fuzzy controller. Besides the efficient way of exerting control, this approach presents the possibility of extracting knowledge of how this control is been made. A fuzzy controller consists basically in an inference machine and a rule base, the later been constructed with specialized knowledge. In some circumstances, however, this knowledge is not accurate, and may lead to non-efficient results. With the development of artificial intelligence techniques, there wore found methods to substitute specialists, simulating its knowledge. Genetic programming is an evolutionary algorithm particularly efficient in manipulating rule base structures. In this work genetic programming was used as a substitute for the specialist. The goal is to test if an irrational object, a computer, is capable, by it self, to find out a rule base reproducing a pre-established actuation levels profile. The result is positive, with the discovery of a fuzzy rule base presenting an insignificant error. A remarkable result that proves the efficiency of the approach. (author)

  5. A computer program to automatically control the multi leaf collimator; Un programa informatico para el control automatico del colimador multilamina

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Galiano, P.; Crelgo Alonso, D.; Gonzalez Sancho, J. M.; Fernandez Garcia, J.; Vivanco Parellada, J.

    2012-07-01

    A computer program to automatically analyze strip test images for MLC leaf positioning quality assurance was developed and assessed. The program is fed with raw individual segment images in DICOM format supplied by the accelerator software and it automatically carries out all the steps in the leaf positioning quality control test (image merging, image analysis, storing and reporting). A comprehensive description of the software, that allows a relatively easy implementation, is shown. To check the performance of the program, a series of test fields with intentionally introduced errors were used. The obtained Measurement uncertainty of any individual leaf position was lower than 0.15 mm with gantry at 0 degree centigrade. At another gantry angles (90 degree centigrade, 180 degree centigrade and 270 degree centigrade) the dispersion of the measurements was larger, specially towards the external positions of the leafs, probably due to a slight rotation of the EPID caused by gravity. That reduces the useful area of the MLC to control when gantry angles different from 0 degree centigrade are used. In conclusion, this technique is fast enough to be carried out in a daily basis being also very precise and reliable. (Author)

  6. Space and Missile Systems Center Standard: Parts, Materials, and Processes Control Program for Space Vehicles

    Science.gov (United States)

    2013-04-12

    preparation , implementation, and operation of a Parts, Materials, and Processes (PMP) control program for use during the design, development...Processes List CDR Critical Design Review CDRL Contract Data Requirements List CMOS Complementary Metal Oxide Semiconductor CONOPS Concept of Operations...Failure Review Board GFE Government Furnished Equipment GIDEP Government Industry Data Exchange Program HBT Heterojunction Bipolar Transistor IPT

  7. Cryogenic instrumentation needs in the controlled thermonuclear research program

    International Nuclear Information System (INIS)

    Walstrom, P.L.

    1976-01-01

    The magnet development effort for the controlled thermonuclear research program will require extensive testing of superconducting coils at various sizes from small-scale models to full-size prototypes. Extensive use of diagnostic instrumentation will be required and to make detailed comparisons of predicted and actual performance in magnet tests and to monitor the test facility for incipient failure modes. At later stages of the program, cryogenic instrumentation will be required to monitor magnet system performance in fusion power reactors. Measured quantities may include temperature, strain, deflection, coil resistance, helium coolant pressure and flow, current, voltages, etc. The test environment, which includes high magnetic fields (up to 8-10 T) and low temperature, makes many commercial measuring devices inoperative or at least inaccurate. In order to ensure reliable measurements, careful screening of commercial devices for performance in the test environment will be required. A survey of potentially applicable instrumentation is presented along with available information on operation in the test environment based on experimental data or on analysis of the physical characteristics of the device. Areas where further development work is needed are delineated

  8. The Effectiveness of Healthy Start Home Visit Program: Cluster Randomized Controlled Trial

    Science.gov (United States)

    Leung, Cynthia; Tsang, Sandra; Heung, Kitty

    2015-01-01

    Purpose: The study reported the effectiveness of a home visit program for disadvantaged Chinese parents with preschool children, using cluster randomized controlled trial design. Method: Participants included 191 parents and their children from 24 preschools, with 84 dyads (12 preschools) in the intervention group and 107 dyads (12 preschools) in…

  9. A New Internet Tool for Automatic Evaluation in Control Systems and Programming

    Science.gov (United States)

    Munoz de la Pena, D.; Gomez-Estern, F.; Dormido, S.

    2012-01-01

    In this paper we present a web-based innovative education tool designed for automating the collection, evaluation and error detection in practical exercises assigned to computer programming and control engineering students. By using a student/instructor code-fusion architecture, the conceptual limits of multiple-choice tests are overcome by far.…

  10. 77 FR 26755 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2012-05-07

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9669-6] Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for Exemption--Class I Hazardous Waste Injection; Diamond... reissuance of an exemption to the land disposal Restrictions, under the 1984 Hazardous and Solid Waste...

  11. 76 FR 55908 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2011-09-09

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9461-5] Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for Exemption--Class I Hazardous Waste Injection; Great Lakes... of an exemption to the land disposal restrictions, under the 1984 Hazardous and Solid Waste...

  12. 76 FR 36129 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2011-06-21

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9321-3] Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for Exemption--Class I Hazardous Waste Injection; ExxonMobil... disposal Restrictions, under the 1984 Hazardous and Solid Waste Amendments to the Resource Conservation and...

  13. 78 FR 42776 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2013-07-17

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL9834-8] Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for Exemption--Class I Hazardous Waste Injection; Blanchard Refining... disposal Restrictions, under the 1984 Hazardous and Solid Waste Amendments to the Resource Conservation and...

  14. 77 FR 52717 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2012-08-30

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9724-1] Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for Exemption--Class I Hazardous Waste Injection; Cornerstone... exemption to the land disposal Restrictions, under the 1984 Hazardous and Solid Waste Amendments to the...

  15. Effectiveness of an exercise program on postural control in frail older adults

    Directory of Open Access Journals (Sweden)

    Alfieri FM

    2012-12-01

    Full Text Available Fábio Marcon Alfieri,1,2 Marcelo Riberto,3 Àngels Abril-Carreres,4 Maria Boldó-Alcaine,4 Elisabet Rusca-Castellet,4 Roser Garreta-Figuera,4 Linamara Rizzo Battistella51São Paulo Adventist University Center, São Paulo, Brazil; 2Institute of Physical and Rehabilitation Medicine Hospital of Clinics, University of São Paulo, Brazil; 3School of Medicine in Ribeirão Preto, University of São Paulo, Brazil; 4University Hospital Mútua Terrassa Department of Rehabilitation, University of Barcelona, Barcelona, Spain; 5School of Medicine, Institute of Physical Medicine and Rehabilitation, Clinics Hospital of University of São Paulo, São Paulo, BrazilBackground: Exercise programs have proved to be helpful for frail older adults. This study aimed to investigate the effects of an exercise program with a focus on postural control exercises in frail older adults.Method: Twenty-six older adults (76.7 ± 4.9 years deemed clinically stable, chosen from the Falls Unit, University Hospital Mútua Terrassa, Barcelona, Spain, participated in this single-group study. Volunteers' postural control was evaluated using the Timed Up and Go test (TUG and the Guralnik test battery, and their static and dynamic posturography were evaluated using the Synapsys Posturography System®. These evaluations were performed before and after the intervention program, which included an educational session and two weekly 1-hour sessions over an 8-week period of stretching exercises, proprioception, balance, and motor coordination. Data were analyzed using the Student's t-test or the Wilcoxon test, with a significance level of 5%.Results: The TUG and Guralnik tests did not show significant differences. Concerning static posturography, there was improvement in the base of support (P = 0.006, anteroposterior displacement with eyes open (P = 0.02 and closed (P = 0.03, and the total amplitude of the center of pressure with eyes closed (P = 0.02. Regarding dynamic posturography, a

  16. The ACTIVATE study: results from a group-randomized controlled trial comparing a traditional worksite health promotion program with an activated consumer program.

    Science.gov (United States)

    Terry, Paul E; Fowles, Jinnet Briggs; Xi, Min; Harvey, Lisa

    2011-01-01

    PURPOSE. This study compares a traditional worksite-based health promotion program with an activated consumer program and a control program DESIGN. Group randomized controlled trial with 18-month intervention. SETTING. Two large Midwestern companies. SUBJECTS. Three hundred and twenty employees (51% response). INTERVENTION. The traditional health promotion intervention offered population-level campaigns on physical activity, nutrition, and stress management. The activated consumer intervention included population-level campaigns for evaluating health information, choosing a health benefits plan, and understanding the risks of not taking medications as prescribed. The personal development intervention (control group) offered information on hobbies. The interventions also offered individual-level coaching for high risk individuals in both active intervention groups. MEASURES. Health risk status, general health status, consumer activation, productivity, and the ability to evaluate health information. ANALYSIS. Multivariate analyses controlled for baseline differences among the study groups. RESULTS. At the population level, compared with baseline performance, the traditional health promotion intervention improved health risk status, consumer activation, and the ability to recognize reliable health websites. Compared with baseline performance, the activated consumer intervention improved consumer activation, productivity, and the ability to recognize reliable health websites. At the population level, however, only the activated consumer intervention improved any outcome more than the control group did; that outcome was consumer activation. At the individual level for high risk individuals, both traditional health coaching and activated consumer coaching positively affected health risk status and consumer activation. In addition, both coaching interventions improved participant ability to recognize a reliable health website. Consumer activation coaching also

  17. MODLP program description: A program for solving linear optimal hydraulic control of groundwater contamination based on MODFLOW simulation. Version 1.0

    International Nuclear Information System (INIS)

    Ahlfeld, D.P.; Dougherty, D.E.

    1994-11-01

    MODLP is a computational tool that may help design capture zones for controlling the movement of contaminated groundwater. It creates and solves linear optimization programs that contain constraints on hydraulic head or head differences in a groundwater system. The groundwater domain is represented by USGS MODFLOW groundwater flow simulation model. This document describes the general structure of the computer program, MODLP, the types of constraints that may be imposed, detailed input instructions, interpretation of the output, and the interaction with the MODFLOW simulation kernel

  18. Effects of a 10-week weight control program on obese patients with schizophrenia or schizoaffective disorder: a 12-month follow up.

    Science.gov (United States)

    Chen, Chih-Ken; Chen, Yi-Chih; Huang, Yu-Shu

    2009-02-01

    Weight gain secondary to antipsychotic medication is associated with many serious conditions, including type II diabetes mellitus, hypertension, and coronary heart disease, and also with poor medication compliance. Weight control programs may be of benefit to outpatients with schizophrenia, but also raise an issue of cost-effectiveness. We aimed to evaluate the effectiveness of a 10-week weight control program for outpatients taking atypical antipsychotics for treatment of schizophrenia, and to follow up the effects of this weight control program in controlling weight gain after termination of the program. A total of 33 patients with schizophrenia and antipsychotic-related obesity were enrolled in a 10-week multimodal weight control program. The patients' weights were recorded at baseline, week 4, week 8, week 10 (end of the intervention), week 12, week 24, and week 48. Secondary measures included blood sugar levels, cholesterol levels, triglyceride levels, quality of life and mental health. For those who completed the weight control program, there was a mean weight loss of 2.1 kg by the end of the intervention, 3.7 kg over 6 months, and 2.7 kg over 12 months. The mean body mass index decreased by 0.8, 1.5 and 1.1 at week 10, week 24 and week 48, respectively, all with statistical significance. The 10-week weight control program was effective in terms of weight reduction among obese patients with schizophrenia or schizoaffective disorder, and the weight reduction effect lasted for up to 6 months, and up to 12 months in some cases.

  19. Space station environmental control and life support systems test bed program - an overview

    Science.gov (United States)

    Behrend, Albert F.

    As the National Aeronautics and Space Administration (NASA) begins to intensify activities for development of the Space Station, decisions must be made concerning the technical state of the art that will be baselined for the initial Space Station system. These decisions are important because significant potential exists for enhancing system performance and for reducing life-cycle costs. However, intelligent decisions cannot be made without an adequate assessment of new and ready technologies, i.e., technologies which are sufficiently mature to allow predevelopment demonstrations to prove their application feasibility and to quantify the risk associated with their development. Therefore, the NASA has implemented a technology development program which includes the establishment of generic test bed capabilities in which these new technologies and approaches can be tested at the prototype level. One major Space Station subsystem discipline in which this program has been implemented is the environmental control and life support system (ECLSS). Previous manned space programs such as Gemini, Apollo, and Space Shuttle have relied heavily on consumables to provide environmental control and life support services. However, with the advent of a long-duration Space Station, consumables must be reduced within technological limits to minimize Space Station resupply penalties and operational costs. The use of advanced environmental control and life support approaches involving regenerative processes offers the best solution for significant consumables reduction while also providing system evolutionary growth capability. Consequently, the demonstration of these "new technologies" as viable options for inclusion in the baseline that will be available to support a Space Station initial operational capability in the early 1990's becomes of paramount importance. The mechanism by which the maturity of these new regenerative life support technologies will be demonstrated is the Space

  20. Effects of a training program after surgically treated ankle fracture: a prospective randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Ekdahl Charlotte S

    2009-09-01

    Full Text Available Abstract Background Despite conflicting results after surgically treated ankle fractures few studies have evaluated the effects of different types of training programs performed after plaster removal. The aim of this study was to evaluate the effects of a 12-week standardised but individually suited training program (training group versus usual care (control group after plaster removal in adults with surgically treated ankle fractures. Methods In total, 110 men and women, 18-64 years of age, with surgically treated ankle fracture were included and randomised to either a 12-week training program or to a control group. Six and twelve months after the injury the subjects were examined by the same physiotherapist who was blinded to the treatment group. The main outcome measure was the Olerud-Molander Ankle Score (OMAS which rates symptoms and subjectively scored function. Secondary outcome measures were: quality of life (SF-36, timed walking tests, ankle mobility tests, muscle strength tests and radiological status. Results 52 patients were randomised to the training group and 58 to the control group. Five patients dropped out before the six-month follow-up resulting in 50 patients in the training group and 55 in the control group. Nine patients dropped out between the six- and twelve-month follow-up resulting in 48 patients in both groups. When analysing the results in a mixed model analysis on repeated measures including interaction between age-group and treatment effect the training group demonstrated significantly improved results compared to the control group in subjects younger than 40 years of age regarding OMAS (p = 0.028, muscle strength in the plantar flexors (p = 0.029 and dorsiflexors (p = 0.030. Conclusion The results of this study suggest that when adjusting for interaction between age-group and treatment effect the training model employed in this study was superior to usual care in patients under the age of 40. However, as only three

  1. 76 FR 42125 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2011-07-18

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9440-3] Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for Exemption--Class I Hazardous Waste Injection; ConocoPhillips... Restrictions, under the 1984 Hazardous and Solid Waste Amendments to the Resource Conservation and Recovery Act...

  2. 78 FR 76294 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2013-12-17

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9904-21-OW] Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for Exemption--Class I Hazardous Waste Injection; Mosaic... Restrictions, under the 1984 Hazardous and Solid Waste Amendments to the Resource Conservation and Recovery Act...

  3. 75 FR 60457 - Underground Injection Control Program Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2010-09-30

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9208-4] Underground Injection Control Program Hazardous Waste Injection Restrictions; Petition for Exemption--Class I Hazardous Waste Injection Dow Chemical Company (DOW... 1984 Hazardous and Solid Waste Amendments to the Resource Conservation and Recovery Act have been...

  4. A worksite prevention program for construction workers: design of a randomized controlled trial.

    Science.gov (United States)

    Oude Hengel, Karen M; Joling, Catelijne I; Proper, Karin I; Blatter, Birgitte M; Bongers, Paulien M

    2010-06-14

    A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program compared with usual care for construction workers. The study is designed as a randomized controlled trial with a follow-up of one year. Employees eligible for this study are construction workers performing actual construction work. The worksite intervention will be compared with usual care. This intervention was developed by using the Intervention Mapping approach and consists of the following components: (1) two individual training sessions of a physical therapist to lower the physical workload, (2) a Rest-Break tool to improve the balance between work and recovery, and (3) two empowerment training sessions to increase the influence of the construction workers at the worksite. Outcome measures are assessed at baseline, 3, 6, and 12 months. The primary outcome measures of this study are work ability and health-related quality of life. Secondary outcome measures include need for recovery, musculoskeletal complaints, work engagement and self efficacy. Cost-effectiveness will be evaluated from the company perspective. Moreover, a process evaluation will be conducted. The feasibility of the intervention and the study has been enhanced by creating an intervention program that explicitly appeals to construction workers and will not interfere too much with the ongoing construction. The feasibility and effectiveness of this worksite prevention program will be investigated by means of an effect- and a process evaluation. If proven effective, this worksite prevention program can be implemented on a larger scale within the construction industry. NTR1278.

  5. [Assessment on the capacity for programs regarding chronic non-communicable diseases prevention and control, in China].

    Science.gov (United States)

    Si, Xiang; Zhai, Yi; Shi, Xiaoming

    2014-06-01

    To assess the policies and programs on the capacity of prevention and control regarding non-communicable diseases (NCDs) at the Centers for Disease Control and Prevention (CDCs) at all levels and grass roots health care institutions, in China. On-line questionnaire survey was adopted by 3 352 CDCs at provincial, city and county levels and 1 200 grass roots health care institutions. 1) On policies: 75.0% of the provincial governments provided special funding for chronic disease prevention and control, whereas 19.7% city government and 11.3% county government did so. 2) Infrastructure:only 7.1% county level CDCs reported having a department taking care of NCD prevention and control. 8 263 staff members worked on NCDs prevention and control, accounting for 4.2% of all the CDCs' personnel. 40.2% CDCs had special funding used for NCDs prevention and control. 3)Capacity on training and guidance:among all the CDCs, 96.9% at provincial level, 50.3% at city level and 42.1% at county level had organized training on NCDs prevention and control. Only 48.3% of the CDCs at county level provided technical guidance for grass-roots health care institutions. 4) Capacities regarding cooperation and participation: 20.2% of the CDCs had experience in collaborating with mass media. 5) Surveillance capacity: 64.6% of the CDCs at county level implemented death registration, compare to less than 30.0% of CDCs at county level implemented surveillance programs on major NCDs and related risk factors. In the grass roots health care institutions, 18.6% implemented new stroke case reporting system but only 3.0% implemented program on myocardial infarction case reporting. 6) Intervention and management capacity: 36.1% and 32.2% of the CDCs conducted individualized intervention on hypertension and diabetes, while less than another 20% intervened into other NCDs and risk factors. More than 50% of the grass roots health care institutions carried follow-up survey on hypertension and diabetes. Rates

  6. Evaluation of the Nuclear Medicine facilities in Minas Gerais state: quality control program of equipment

    International Nuclear Information System (INIS)

    Kubo, Tadeu Takao Almodovar; Biancardi, Rodrigo; Rocha, Adriana Marcia Guimaraes; Ferreira, Denia Romao; Silva, Franciele Aquiles Anjos; Assuncao, Jonathan Buenos Aires; Alves, Ederson Henrique; Almeida, Ana Flavia Batista; Alves, Nathalia Fernandes; Xavier, Faber Henrique Zacarias; Gontijo, Rodrigo Modesto Gadelha; Mamede, Marcelo; Universidade Federal de Minas Gerais

    2017-01-01

    With the reformulation of the CNEN-NN-3.05 standard in December 2013, Brazil's Nuclear Medicine (NMS) services have to perform a greater number of quality controls for SPECT and PET equipment. However, little is known about the reality of the quality control programs of these services regarding the application of the new standard. Thus, in this context, the objective of the present study was to evaluate the quality control program of MNSs in the state of Minas Gerais. All NMSs in the state of Minas Gerais were invited to participate in the project. Of these, 34.48% (20 facilities) agreed to participate in the project, 50.00% (29 facilities) did not respond to the invitation and 15.52%(9 facilities) declined their participation. Thus, as of November 2015, 20 SPECT and 2 PET/CT equipment were evaluated for the performance of the quality control tests recommended by the new CNEN standard. The phantoms required for the evaluation came from the Laboratory of Dosimetry and Quality Control of UFMG. Even with the deadlines set by CNEN for the implementation of the quality control program in the NMSs, more than 50% of the evaluated services did not implement the quality controls, and the absence of specific phantoms is the main reason for the failure. Among the problems found in the installations, the most critical were: collimators with no conditions of use in the clinical routine, linearity problems of the evaluated image and values of image uniformity superior to the limits of acceptance. Problems in the uniformity and linearity of the image found directly impacted the performance of other tests, such as spatial resolution, SPECT performance, among others. In a general way, the NMSs in the state of Minas Gerais evaluated with the present study are in clinical feasible conditions. (author)

  7. Hazardous materials management and control program at Oak Ridge National Laboratory - environmental protection

    International Nuclear Information System (INIS)

    Eisenhower, B.M.; Oakes, T.W.

    1982-01-01

    In the Federal Register of May 19, 1980, the US Environmental Protection Agency promulgated final hazardous waste regulations according to the Resource Conservation and Recovery Act (RCRA) of 1976. The major substantive portions of these regulations went into effect on November 19, 1980, and established a federal program to provide comprehensive regulation of hazardous waste from its generation to its disposal. In an effort to comply with these regulations, a Hazardous Materials Management and Control Program was established at Oak Ridge National Laboratory. The program is administered by two Hazardous Materials Coordinators, who together with various support groups, ensure that all hazardous materials and wastes are handled in such a manner that all personnel, the general public, and the environment are adequately protected

  8. Developmental programming of hypothalamic neuronal circuits: impact on energy balance control

    Directory of Open Access Journals (Sweden)

    Thanuja eGali Ramamoorthy

    2015-04-01

    Full Text Available The prevalence of obesity in adults and children has increased globally at an alarming rate. Mounting evidence from both epidemiological studies and animal models indicates that adult obesity and associated metabolic disorders can be programmed by intrauterine and early postnatal environment- a phenomenon known as fetal programming of adult disease. Data from nutritional intervention studies in animals including maternal under- and over-nutrition support the developmental origins of obesity and metabolic syndrome. The hypothalamic neuronal circuits located in the arcuate nucleus controlling appetite and energy expenditure are set early in life and are perturbed by maternal nutritional insults. In this review, we focus on the effects of maternal nutrition in programming permanent changes in these hypothalamic circuits, with experimental evidence from animal models of maternal under- and over-nutrition. We discuss the epigenetic modifications which regulate hypothalamic gene expression as potential molecular mechanisms linking maternal diet during pregnancy to the offspring’s risk of obesity at a later age. Understanding these mechanisms in key metabolic genes may provide insights into the development of preventative intervention strategies.

  9. Developmental programming of hypothalamic neuronal circuits: impact on energy balance control

    Science.gov (United States)

    Gali Ramamoorthy, Thanuja; Begum, Ghazala; Harno, Erika; White, Anne

    2015-01-01

    The prevalence of obesity in adults and children has increased globally at an alarming rate. Mounting evidence from both epidemiological studies and animal models indicates that adult obesity and associated metabolic disorders can be programmed by intrauterine and early postnatal environment- a phenomenon known as “fetal programming of adult disease.” Data from nutritional intervention studies in animals including maternal under- and over-nutrition support the developmental origins of obesity and metabolic syndrome. The hypothalamic neuronal circuits located in the arcuate nucleus controlling appetite and energy expenditure are set early in life and are perturbed by maternal nutritional insults. In this review, we focus on the effects of maternal nutrition in programming permanent changes in these hypothalamic circuits, with experimental evidence from animal models of maternal under- and over-nutrition. We discuss the epigenetic modifications which regulate hypothalamic gene expression as potential molecular mechanisms linking maternal diet during pregnancy to the offspring's risk of obesity at a later age. Understanding these mechanisms in key metabolic genes may provide insights into the development of preventative intervention strategies. PMID:25954145

  10. Does the incorporation of portion-control strategies in a behavioral program improve weight loss in a 1-year randomized controlled trial?

    Science.gov (United States)

    Rolls, B J; Roe, L S; James, B L; Sanchez, C E

    2017-03-01

    Controlling food portion sizes can help reduce energy intake, but the effect of different portion-control methods on weight management is not known. In a 1-year randomized trial, we tested whether the efficacy of a behavioral weight-loss program was improved by incorporating either of the two portion-control strategies instead of standard advice about eating less. The Portion-Control Strategies Trial included 186 women with obesity (81%) or overweight (19%). Participants were randomly assigned to one of three equally intensive behavioral programs, consisting of 19 individual sessions over 12 months. The Standard Advice Group was instructed to eat less food while making healthy choices, the Portion Selection Group was instructed to choose portions based on the energy density using tools such as food scales and the Pre-portioned Foods Group was instructed to structure meals around pre-portioned foods such as single-serving main dishes, for which some vouchers were provided. In an intention-to-treat analysis, a mixed-effects model compared weight loss trajectories across 23 measurements; at month 12, weight was measured for 151 participants (81%). The trajectories showed that the Pre-portioned Foods Group initially lost weight at a greater rate than the other two groups (P=0.021), but subsequently regained weight at a greater rate (P=0.0005). As a result, weight loss did not differ significantly across groups at month 6 (mean±s.e. 5.2±0.4 kg) or month 12 (4.5±0.5 kg). After 1 year, measured weight loss averaged 6% of baseline weight. The frequency of using portion-control strategies initially differed across groups, then declined over time and converged at months 6 and 12. Incorporating instruction on portion-control strategies within a 1-year behavioral program did not lead to a greater weight loss than standard advice. Using pre-portioned foods enhanced early weight loss, but this was not sustained over time. Long-term maintenance of behavioral strategies to

  11. Generalized Analytical Program of Thyristor Phase Control Circuit with Series and Parallel Resonance Load

    OpenAIRE

    Nakanishi, Sen-ichiro; Ishida, Hideaki; Himei, Toyoji

    1981-01-01

    The systematic analytical method is reqUired for the ac phase control circuit by means of an inverse parallel thyristor pair which has a series and parallel L-C resonant load, because the phase control action causes abnormal and interesting phenomena, such as an extreme increase of voltage and current, an unique increase and decrease of contained higher harmonics, and a wide variation of power factor, etc. In this paper, the program for the analysis of the thyristor phase control circuit with...

  12. Development of computational program for studying the reactor control system in PWR plants; Desenvolvimento de um programa computacional para estudo do sistema de controle do reator em plantas PWR

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Jose Ricardo de; Soares, Adalberto Jose [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    2002-07-01

    In this work a computational program is presented which has been developed for specific application on the study of the reactor control system of a typical PWR plant. As to the basic function of simulating power transients the program has the following structure: a representative mathematical model of the dynamic and stationary behaviors of the primary circuit; a group of equations associated to the reactor power control and system pressure control; screens for the entry of reference data as well as of control blocks and control bar speed programming module parameters; main entering screens for the configuration of the excitement/transient function as well as of simulation time and control mood; and graphical output of all the process variables incorporated to the model. As premise it has been considered as sufficient the modeling of the primary circuit, a differential equation being used which associates the average temperature of the coolant within the steam generator with the potency transferred to the secondary circuit, denominated 'secondary potency', as an interface with the secondary circuit. Every transient - ramp or step - is established upon the 'turbine power' variable, which in turn is related to the 'secondary power' variable by means of a differential equation that represents a first - order delay, having adjustable parameters on the data - entry screen. In the neutronic model as defined for the reactor, the reactivity feedback effects due to primary circuit pressure variation, as well as fuel and coolant temperature variation, were taken into consideration. Thermo-hydraulics constants and project data taken from the available bibliography, adapted to a particular small PWR unit conception , were employed for loading the program. With the open-loop simulation results a positive qualitative evaluation of the program was obtained, in comparison to published results related to simulators bearing equal purposes, more

  13. Advantages of a program of quality control in the nuclear medicine equipment

    International Nuclear Information System (INIS)

    Trujillo Z, F.E.; Argumosa, E.; Herrera R, M.R.

    2007-01-01

    In Nuclear Medicine more 90% of the entirety of the carried out procedures its are with diagnostic ends where it is acquired one or several images. This makes indispensable to have an appropriate operation of the dedicated equipment to produce images and also of those non former images, as the activity caliper, to assure an appropriate quality diagnoses not from the images and the correct dose administration to the patient. In this work the main calibrations that should be carried out and an example of the program of quality control of a gamma camera mark Siemens and model E.CAM are presented. Considerations that should take as for the radiological protection are exposed. Comments on the parameters that correct the required calibrations and the images taken place by an operation or inadequate calibrations are included. In conclusion, the necessity of a program that it contains as minimum the quality control of the gamma cameras and of the activity caliper, having as main advantages a good image quality diagnoses and to minimize the dose imparted the patient are exposed. (Author)

  14. Programming Cells for Dynamic Assembly of Inorganic Nano-Objects with Spatiotemporal Control.

    Science.gov (United States)

    Wang, Xinyu; Pu, Jiahua; An, Bolin; Li, Yingfeng; Shang, Yuequn; Ning, Zhijun; Liu, Yi; Ba, Fang; Zhang, Jiaming; Zhong, Chao

    2018-04-01

    Programming living cells to organize inorganic nano-objects (NOs) in a spatiotemporally precise fashion would advance new techniques for creating ordered ensembles of NOs and new bio-abiotic hybrid materials with emerging functionalities. Bacterial cells often grow in cellular communities called biofilms. Here, a strategy is reported for programming dynamic biofilm formation for the synchronized assembly of discrete NOs or hetero-nanostructures on diverse interfaces in a dynamic, scalable, and hierarchical fashion. By engineering Escherichia coli to sense blue light and respond by producing biofilm curli fibers, biofilm formation is spatially controlled and the patterned NOs' assembly is simultaneously achieved. Diverse and complex fluorescent quantum dot patterns with a minimum patterning resolution of 100 µm are demonstrated. By temporally controlling the sequential addition of NOs into the culture, multilayered heterostructured thin films are fabricated through autonomous layer-by-layer assembly. It is demonstrated that biologically dynamic self-assembly can be used to advance a new repertoire of nanotechnologies and materials with increasing complexity that would be otherwise challenging to produce. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. The effects of an integrated health education and exercise program in community-dwelling older adults with hypertension: a randomized controlled trial.

    Science.gov (United States)

    Park, Yeon-Hwan; Song, Misoon; Cho, Be-Long; Lim, Jae-Young; Song, Wook; Kim, Seon-Ho

    2011-01-01

    the aim of this study was to examine the effectiveness of HAHA (Healthy Aging and Happy Aging) program, which is an integrated health education and exercise program for community-dwelling older adults with hypertension. older adults with hypertension from one senior center were randomly allocated to experimental (n=18) or control group (n=22). Experimental group received health education, individual counseling and tailored exercise program for 12 weeks. the mean ages were 71 years (experimental group) and 69 (control group). After the intervention, systolic blood pressure of experimental group was significantly decreased than that of control group. Scores of exercise self-efficacy, general health, vitality, social functioning, and mental health in SF-36 were statistically higher than those of control group. the HAHA program was effective in control of systolic blood pressure and improving self-efficacy for exercise and health-related quality of life. 2010 Elsevier Ireland Ltd. All rights reserved.

  16. The Revised WIPP Passive Institutional Controls Program - A Conceptual Plan - 13145

    International Nuclear Information System (INIS)

    Patterson, Russ; Klein, Thomas; Van Luik, Abraham

    2013-01-01

    The Department of Energy/Carlsbad Field Office (DOE/CBFO) is responsible for managing all activities related to the disposal of TRU and TRU-mixed waste in the geologic repository, 650 m below the land surface, at WIPP, near Carlsbad, New Mexico. The main function of the Passive Institutional Controls (PIC's) program is to inform future generations of the long-lived radioactive wastes buried beneath their feet in the desert. For the first 100 years after cessation of disposal operations, the rooms are closed and the shafts leading underground sealed, WIPP is mandated by law to institute Active Institutional Controls (AIC's) with fences, gates, and armed guards on patrol. At this same time a plan must be in place of how to warn/inform the future, after the AIC's are gone, of the consequences of intrusion into the geologic repository disposal area. A plan was put into place during the 1990's with records management and storage, awareness triggers, permanent marker design concepts and testing schedules. This work included the thoughts of expert panels and individuals. The plan held up under peer review and met the requirements of the U.S. Environmental Protection Agency (EPA). Today the NEA is coordinating a study called the 'Preservation of Records, Knowledge and Memory (RK and M) Across Generations' to provide the international nuclear waste repository community with a guide on how a nuclear record archive programs should be approached and developed. CBFO is cooperating and participating in this project and will take what knowledge is gained and apply that to the WIPP program. At the same time CBFO is well aware that the EPA and others are expecting DOE to move forward with planning for the future WIPP PIC's program; so a plan will be in place in time for WIPP's closure slated for the early 2030's. The DOE/CBFO WIPP PIC's program in place today meets the regulatory criteria, but complete feasibility of implementation is questionable, and may not be in conformance

  17. Cost-Effectiveness of a Model Infection Control Program for Preventing Multi-Drug-Resistant Organism Infections in Critically Ill Surgical Patients.

    Science.gov (United States)

    Jayaraman, Sudha P; Jiang, Yushan; Resch, Stephen; Askari, Reza; Klompas, Michael

    2016-10-01

    Interventions to contain two multi-drug-resistant Acinetobacter (MDRA) outbreaks reduced the incidence of multi-drug-resistant (MDR) organisms, specifically methicillin-resistant Staphylococcus aureus, vancomycin-resistant Enterococcus, and Clostridium difficile in the general surgery intensive care unit (ICU) of our hospital. We therefore conducted a cost-effective analysis of a proactive model infection-control program to reduce transmission of MDR organisms based on the practices used to control the MDRA outbreak. We created a model of a proactive infection control program based on the 2011 MDRA outbreak response. We built a decision analysis model and performed univariable and probabilistic sensitivity analyses to evaluate the cost-effectiveness of the proposed program compared with standard infection control practices to reduce transmission of these MDR organisms. The cost of a proactive infection control program would be $68,509 per year. The incremental cost-effectiveness ratio (ICER) was calculated to be $3,804 per aversion of transmission of MDR organisms in a one-year period compared with standard infection control. On the basis of probabilistic sensitivity analysis, a willingness-to-pay (WTP) threshold of $14,000 per transmission averted would have a 42% probability of being cost-effective, rising to 100% at $22,000 per transmission averted. This analysis gives an estimated ICER for implementing a proactive program to prevent transmission of MDR organisms in the general surgery ICU. To better understand the causal relations between the critical steps in the program and the rate reductions, a randomized study of a package of interventions to prevent healthcare-associated infections should be considered.

  18. Development of a Biological Control Program for Eurasian Watermilfoil (Myriophyllum spicatum)

    Science.gov (United States)

    2008-08-01

    Eignung einer Insektengruppe für die Fauna - Flora -Habitat-Richtlinie der EU (92/43/EWG, 21. Mai 1992) am Beispiel der Rüsselkäfer-Unterfamilie Bagoinae... y Approved for public release; distribution is unlimited. Aquatic Plant Control Research Program ERDC/EL TR-08-22 August 2008 Development of...Survey). .............................. 7 Tables Table A1. Known Myriophyllum species in Eurasia, North and South America, and Africa ..............26

  19. Modular programming for tuberculosis control, the "AuTuMN" platform.

    Science.gov (United States)

    Trauer, James McCracken; Ragonnet, Romain; Doan, Tan Nhut; McBryde, Emma Sue

    2017-08-07

    Tuberculosis (TB) is now the world's leading infectious killer and major programmatic advances will be needed if we are to meet the ambitious new End TB Targets. Although mathematical models are powerful tools for TB control, such models must be flexible enough to capture the complexity and heterogeneity of the global TB epidemic. This includes simulating a disease that affects age groups and other risk groups differently, has varying levels of infectiousness depending upon the organ involved and varying outcomes from treatment depending on the drug resistance pattern of the infecting strain. We adopted sound basic principles of software engineering to develop a modular software platform for simulation of TB control interventions ("AuTuMN"). These included object-oriented programming, logical linkage between modules and consistency of code syntax and variable naming. The underlying transmission dynamic model incorporates optional stratification by age, risk group, strain and organ involvement, while our approach to simulating time-variant programmatic parameters better captures the historical progression of the epidemic. An economic model is overlaid upon this epidemiological model which facilitates comparison between new and existing technologies. A "Model runner" module allows for predictions of future disease burden trajectories under alternative scenario situations, as well as uncertainty, automatic calibration, cost-effectiveness and optimisation. The model has now been used to guide TB control strategies across a range of settings and countries, with our modular approach enabling repeated application of the tool without the need for extensive modification for each application. The modular construction of the platform minimises errors, enhances readability and collaboration between multiple programmers and enables rapid adaptation to answer questions in a broad range of contexts without the need for extensive re-programming. Such features are particularly

  20. A Linear Programming Approach to Routing Control in Networks of Constrained Nonlinear Positive Systems with Concave Flow Rates

    Science.gov (United States)

    Arneson, Heather M.; Dousse, Nicholas; Langbort, Cedric

    2014-01-01

    We consider control design for positive compartmental systems in which each compartment's outflow rate is described by a concave function of the amount of material in the compartment.We address the problem of determining the routing of material between compartments to satisfy time-varying state constraints while ensuring that material reaches its intended destination over a finite time horizon. We give sufficient conditions for the existence of a time-varying state-dependent routing strategy which ensures that the closed-loop system satisfies basic network properties of positivity, conservation and interconnection while ensuring that capacity constraints are satisfied, when possible, or adjusted if a solution cannot be found. These conditions are formulated as a linear programming problem. Instances of this linear programming problem can be solved iteratively to generate a solution to the finite horizon routing problem. Results are given for the application of this control design method to an example problem. Key words: linear programming; control of networks; positive systems; controller constraints and structure.

  1. Gener: a minimal programming module for chemical controllers based on DNA strand displacement.

    Science.gov (United States)

    Kahramanoğulları, Ozan; Cardelli, Luca

    2015-09-01

    : Gener is a development module for programming chemical controllers based on DNA strand displacement. Gener is developed with the aim of providing a simple interface that minimizes the opportunities for programming errors: Gener allows the user to test the computations of the DNA programs based on a simple two-domain strand displacement algebra, the minimal available so far. The tool allows the user to perform stepwise computations with respect to the rules of the algebra as well as exhaustive search of the computation space with different options for exploration and visualization. Gener can be used in combination with existing tools, and in particular, its programs can be exported to Microsoft Research's DSD tool as well as to LaTeX. Gener is available for download at the Cosbi website at http://www.cosbi.eu/research/prototypes/gener as a windows executable that can be run on Mac OS X and Linux by using Mono. ozan@cosbi.eu. © The Author 2015. Published by Oxford University Press.

  2. Cost-effectiveness and budget impact analyses of a long-term hypertension detection and control program for stroke prevention.

    Science.gov (United States)

    Yamagishi, Kazumasa; Sato, Shinichi; Kitamura, Akihiko; Kiyama, Masahiko; Okada, Takeo; Tanigawa, Takeshi; Ohira, Tetsuya; Imano, Hironori; Kondo, Masahide; Okubo, Ichiro; Ishikawa, Yoshinori; Shimamoto, Takashi; Iso, Hiroyasu

    2012-09-01

    The nation-wide, community-based intensive hypertension detection and control program, as well as universal health insurance coverage, may well be contributing factors for helping Japan rank near the top among countries with the longest life expectancy. We sought to examine the cost-effectiveness of such a community-based intervention program, as no evidence has been available for this issue. The hypertension detection and control program was initiated in 1963 in full intervention and minimal intervention communities in Akita, Japan. We performed comparative cost-effectiveness and budget-impact analyses for the period 1964-1987 of the costs of public health services and treatment of patients with hypertension and stroke on the one hand, and incidence of stroke on the other in the full intervention and minimal intervention communities. The program provided in the full intervention community was found to be cost saving 13 years after the beginning of program in addition to the fact of effectiveness that; the prevalence and incidence of stroke were consistently lower in the full intervention community than in the minimal intervention community throughout the same period. The incremental cost was minus 28,358 yen per capita over 24 years. The community-based intensive hypertension detection and control program was found to be both effective and cost saving. The national government's policy to support this program may have contributed in part to the substantial decline in stroke incidence and mortality, which was largely responsible for the increase in Japanese life expectancy.

  3. Internet-Delivered Parenting Program for Prevention and Early Intervention of Anxiety Problems in Young Children: Randomized Controlled Trial.

    Science.gov (United States)

    Morgan, Amy J; Rapee, Ronald M; Salim, Agus; Goharpey, Nahal; Tamir, Elli; McLellan, Lauren F; Bayer, Jordana K

    2017-05-01

    The Cool Little Kids parenting group program is an effective intervention for preventing anxiety disorders in young children who are at risk because of inhibited temperament. The program has six group sessions delivered by trained psychologists to parents of 3- to 6-year-old children. An online adaptation (Cool Little Kids Online) has been developed to overcome barriers to its wide dissemination in the community. This study tested the efficacy of Cool Little Kids Online in a randomized controlled trial. A total of 433 parents of a child aged 3 to 6 years with an inhibited temperament were randomized to the online parenting program or to a 24-week waitlist. The online program has 8 interactive modules providing strategies that parents can implement with their child to manage their child's avoidant coping, reduce parental overprotection, and encourage child independence. Parents were provided telephone consultation support with a psychologist when requested. Parents completed self-report questionnaires at baseline and at 12 and 24 weeks after baseline. The intervention group showed significantly greater improvement over time in child anxiety symptoms compared to the control group (d = 0.38). The intervention group also showed greater reductions in anxiety life interference (ds = 0.33-0.35) and lower rates of anxiety disorders than the control group (40% versus 54%), but there were minimal effects on broader internalizing symptoms or overprotective parenting. Results provide empirical support for the efficacy of online delivery of the Cool Little Kids program. Online dissemination may improve access to an evidence-based prevention program for child anxiety disorders. Clinical trial registration information-Randomised Controlled Trial of Cool Little Kids Online: A Parenting Program to Prevent Anxiety Problems in Young Children; http://www.anzctr.org.au/; 12615000217505. Copyright © 2017 American Academy of Child and Adolescent Psychiatry. Published by Elsevier Inc

  4. Rearing Fopius arisanus (Sonan) (Hymenoptera:Braconidae) on Mediterranean fruit fly and its introduction into Senegal against Oriental fruit fly (Diptera: Tephritidae)

    Science.gov (United States)

    Oriental fruit fly, Bactrocera dorsalis(Hendel)(aka B.invadens Drew, Tsuruta, and White) was first reported in Africa in 2003 and has since spread to over 27 countries. It has become a serious tree fruit pest, particularly in mango (Mangifera indica L.). Because of uncertainty as to the exact status...

  5. Are multilateral malaria research and control programs the most successful? Lessons from the past 100 years in Africa.

    Science.gov (United States)

    Alilio, Martin S; Bygbjerg, Ib C; Breman, Joel G

    2004-08-01

    Multilateral malaria research and control programs in Africa have regained prominence recently as bilateral assistance has diminished. The transnational nature of the threat and the need for inspired leadership, good coordination, and new discoveries to decrease the impact of the disease has led to the founding of the Multilateral Initiative on Malaria, the Roll Back Malaria Project, Global Fund for HIV, Tuberculosis and Malaria (Global Fund), the Medicines for Malaria Venture, and the Malaria Vaccine Initiative, among other groups. Historically, the most striking feature of malaria control and elimination activities was the connectedness and balance between malaria research and control especially, from 1892 to 1949. A combination of scientific originality, perseverance in research, integrated approaches, and social concern were the keys for success. The elimination of Anopheles gambiae from Upper Egypt in 1942 using integrated vector control methods is a prime example of malaria control during the first half of the 20th century where those factors were brought together. After 1949, there were three decades of great optimism. Four notable landmarks characterized this period: the Kampala Conference in 1950; the Global Malaria Eradication Program beginning in 1955; the primary health care strategies adopted by most African States after attaining their political independence in the 1960s, and accelerating in the 1980s; and creation of the Special Program in Training and Research in Tropical Diseases at the World Health Organization in 1975. The initial highly encouraging operational results, largely obtained in temperate or subtropical areas where transmission was unstable, engendered undue expectations for the success of identical antimalarial measures elsewhere. Many were convinced that the eradication was in sight, such that support for malaria research virtually ceased. Young, bright scientists were discouraged from seeking a career in a discipline that appeared

  6. Quality control in screening programs for cervical cancer; Control de la calidad en los programas de pesquisa de cancer cervicouterino

    Energy Technology Data Exchange (ETDEWEB)

    Sarduy Napoles, Miguel, E-mail: miguel.sarduy@infomed.sld.cu [Centro de Investigaciones Medico Quirurgicas, La Habana (Cuba)

    2012-07-01

    The malignancy of the cervix is one of the few locations avoidable cancers, if detected before it progresses to the infiltration. The most efficient way of early detection is through a screening program to provide women undertaking a regular and quality Pap smear. If this test results abnormal, the program offers easier access to specialized care, effective treatment, and follow-up. The objective of this article is to present usefulness of methods for quality control used in screening programs for cervical cancer to detect their inadequacies. Here are some factors and conditions that must be considered in each of the steps to take, for a cervical cancer screening program to be successful and to meet the objectives proposed in reducing mortality due to this cause. This document contains some useful indexes calculated to ensure quality throughout the process. There should be the measurement of quality throughout the screening process that allows collecting of reliable data as well as correcting deficiencies

  7. Decentralized real time control system of inspection robot programmed in APL

    International Nuclear Information System (INIS)

    Dupeyrat, Benoit; Liabot, M.J.; Vertut, Jean

    1979-01-01

    The running of the SUPER PHENIX vessel inspection robot meets with special practical necessities: the distance between the robot and the computer responsible for its management is important since the piloting station is outside the safety enclosure. For this reason the control and alarm functions have been separated from those of strategy and readjustment. The system described here is thus made up of: a mini-computer to manage the piloting station and a microprocessor as close as possible to the machine for control and safety duties. This arrangement has the advantage of limiting the input/output volume of the mini-computer which can thus be programmed in APL, a language particularly efficient and well suited to the problem [fr

  8. Changes in weight control behaviors and hedonic hunger during a 12-week commercial weight loss program.

    Science.gov (United States)

    O'Neil, Patrick M; Theim, Kelly R; Boeka, Abbe; Johnson, Gail; Miller-Kovach, Karen

    2012-12-01

    Greater use of key self-regulatory behaviors (e.g., self-monitoring of food intake and weight) is associated with greater weight loss within behavioral weight loss treatments, although this association is less established within widely-available commercial weight loss programs. Further, high hedonic hunger (i.e., susceptibility to environmental food cues) may present a barrier to successful behavior change and weight loss, although this has not yet been examined. Adult men and women (N=111, body mass index M±SD=31.5±2.7kg/m(2)) were assessed before and after participating in a 12-week commercial weight loss program. From pre- to post-treatment, reported usage of weight control behaviors improved and hedonic hunger decreased, and these changes were inversely associated. A decrease in hedonic hunger was associated with better weight loss. An improvement in reported weight control behaviors (e.g., self-regulatory behaviors) was associated with better weight loss, and this association was even stronger among individuals with high baseline hedonic hunger. Findings highlight the importance of specific self-regulatory behaviors within weight loss treatment, including a commercial weight loss program developed for widespread community implementation. Assessment of weight control behavioral skills usage and hedonic hunger may be useful to further identify mediators of weight loss within commercial weight loss programs. Future interventions might specifically target high hedonic hunger and prospectively examine changes in hedonic hunger during other types of weight loss treatment to inform its potential impact on sustained behavior change and weight control. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Completion report : Effect of Comprehensive Yogic Breathing program on type 2 diabetes: A randomized control trial

    Directory of Open Access Journals (Sweden)

    V P Jyotsna

    2014-01-01

    Full Text Available Background: Yoga has been shown to be benefi cial in diabetes in many studies, though randomized control trials are few. The aim of this randomized control trial was to see the effect of Sudarshan Kriya and related practices (comprehensive yogic breathing program on quality of life, glycemic control, and cardiac autonomic functions in diabetes. Diabetes mellitus is a risk factor for sudden cardiac death. Cardiac autonomic neuropathy has been implicated in the causation of sudden cardiac death. Therefore, a maneuver to prevent progression of cardiac autonomic neuropathy holds signifi cance. Materials and Methods: A total of 120 patients of diabetes on oral medication and diet and exercise advice were randomized into two groups: (1 Continued to receive standard treatment for diabetes. (2 Patients administered comprehensive yogic breathing program and monitored to regularly practice yoga in addition to standard treatment of diabetes. At 6 months, quality of life and postprandial plasma glucose signifi cantly improved in the group practicing yoga compared to baseline, but there was no significant improvement in the fasting plasma glucose and glycated hemoglobin. Results: On per protocol analysis, sympathetic cardiac autonomic functions signifi cantly improved from baseline in the group practicing comprehensive yogic breathing. Conclusion: This randomized control trial points towards the beneficial effect of yogic breathing program in preventing progression of cardiac neuropathy. This has important implications as cardiac autonomic neuropathy has been considered as one of the factors for sudden cardiac deaths.Keywords: comprehensive yogic breathing program, diabetes mellitus, cardiac autonomic function

  10. A worksite prevention program for construction workers: design of a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Proper Karin I

    2010-06-01

    Full Text Available Abstract Background A worksite prevention program was developed to promote the work ability of construction workers and thereby prolong a healthy working life. The objective of this paper is to present the design of a randomized controlled trial evaluating the effectiveness of that intervention program compared with usual care for construction workers. Methods The study is designed as a randomized controlled trial with a follow-up of one year. Employees eligible for this study are construction workers performing actual construction work. The worksite intervention will be compared with usual care. This intervention was developed by using the Intervention Mapping approach and consists of the following components: (1 two individual training sessions of a physical therapist to lower the physical workload, (2 a Rest-Break tool to improve the balance between work and recovery, and (3 two empowerment training sessions to increase the influence of the construction workers at the worksite. Outcome measures are assessed at baseline, 3, 6, and 12 months. The primary outcome measures of this study are work ability and health-related quality of life. Secondary outcome measures include need for recovery, musculoskeletal complaints, work engagement and self efficacy. Cost-effectiveness will be evaluated from the company perspective. Moreover, a process evaluation will be conducted. Discussion The feasibility of the intervention and the study has been enhanced by creating an intervention program that explicitly appeals to construction workers and will not interfere too much with the ongoing construction. The feasibility and effectiveness of this worksite prevention program will be investigated by means of an effect- and a process evaluation. If proven effective, this worksite prevention program can be implemented on a larger scale within the construction industry. Trial Registration NTR1278

  11. Group program procedure for machining seal rings of steam turbines on digital computer controlled machines

    International Nuclear Information System (INIS)

    Glukhikh, V.K.; Skvortsov, S.B.; Sidorov, V.A.

    1982-01-01

    Developed is a group program procedure for turning machining of seal rings, including the use of new progressive high-accuracy equipment, universal device for securing of all nomenclature of treated seal rings, necessary cutting tools and program control of the process of treatment. Introduction of a new technological process permitted to improve the quality of treated seal rings; to reduce the labour consumption in 30...40% [ru

  12. Effect of a life review program for Chinese patients with advanced cancer: a randomized controlled trial.

    Science.gov (United States)

    Xiao, Huimin; Kwong, Enid; Pang, Samantha; Mok, Esther

    2013-01-01

    Empirical data suggest that life review is an effective psychospiritual intervention. However, it has not been applied to Chinese patients with advanced cancer, and its effects on this population remain unknown. The aim of the study was to determine the effect of a life review program on quality of life among Chinese patients with advanced cancer. In this prospective randomized controlled trial, a total of 80 patients were randomly assigned to the life review program group and the control group. The 3-weekly life review program included reviewing a life and formulating a life review booklet. Outcome data were assessed by a collector who was blinded to group assignment before and immediately after the program and at a 3-week follow-up. Significantly better scores in overall quality of life, support, negative emotions, sense of alienation, existential distress, and value of life were found in the life review group immediately after the program and at the 3-week follow-up. This study provides additional data on the potential role of a life review in improving quality of life, particularly psychospiritual well being; it also indicates that the life review program could enable Chinese patients with advanced cancer to express their views on life and death. The life review program offers advanced cancer patients an opportunity to integrate their whole life experiences and discuss end-of-life issues, which lays the ground for further active intervention in their psychospiritual distress. The program could be integrated into daily home care to enhance the psychospiritual well-being of Chinese patients with advanced cancer.

  13. Environmental emissions control programs at Lambton TGS [Thermal Generating Station

    International Nuclear Information System (INIS)

    Kalvins, A.K.

    1992-01-01

    Ontario Hydro's air emissions control programs at Lambton thermal generating station, both committed and planned, are reviewed, and their potential impacts on emissions, effluents and wastes are discussed. Control technologies examined include flue gas conditioning, wet limestone scrubbing, combustion process modifications, urea injection, and selective catalytic reduction. The implementation of these technologies has the potential to create new solid and liquid waste disposal problems, the full extent of which is often not realized at the process selection stage. For example, selective noncatalytic reduction using urea injection can lead to increased CO emissions, escape of unreacted ammonia from the stack at levels of 5-50 ppM, increase in N 2 O emissions, contamination of fly ash, gypsum and waste water with ammonia, and an increase in CO 2 emissions of less than 0.4% due to increased power consumption. Optimum performance of the air emissions control systems, with minimum negative impact on the environment, requires consideration of the impact of these systems on all waste streams. 11 refs., 3 figs., 1 tab

  14. Dynamic Programming and Error Estimates for Stochastic Control Problems with Maximum Cost

    International Nuclear Information System (INIS)

    Bokanowski, Olivier; Picarelli, Athena; Zidani, Hasnaa

    2015-01-01

    This work is concerned with stochastic optimal control for a running maximum cost. A direct approach based on dynamic programming techniques is studied leading to the characterization of the value function as the unique viscosity solution of a second order Hamilton–Jacobi–Bellman (HJB) equation with an oblique derivative boundary condition. A general numerical scheme is proposed and a convergence result is provided. Error estimates are obtained for the semi-Lagrangian scheme. These results can apply to the case of lookback options in finance. Moreover, optimal control problems with maximum cost arise in the characterization of the reachable sets for a system of controlled stochastic differential equations. Some numerical simulations on examples of reachable analysis are included to illustrate our approach

  15. Dynamic Programming and Error Estimates for Stochastic Control Problems with Maximum Cost

    Energy Technology Data Exchange (ETDEWEB)

    Bokanowski, Olivier, E-mail: boka@math.jussieu.fr [Laboratoire Jacques-Louis Lions, Université Paris-Diderot (Paris 7) UFR de Mathématiques - Bât. Sophie Germain (France); Picarelli, Athena, E-mail: athena.picarelli@inria.fr [Projet Commands, INRIA Saclay & ENSTA ParisTech (France); Zidani, Hasnaa, E-mail: hasnaa.zidani@ensta.fr [Unité de Mathématiques appliquées (UMA), ENSTA ParisTech (France)

    2015-02-15

    This work is concerned with stochastic optimal control for a running maximum cost. A direct approach based on dynamic programming techniques is studied leading to the characterization of the value function as the unique viscosity solution of a second order Hamilton–Jacobi–Bellman (HJB) equation with an oblique derivative boundary condition. A general numerical scheme is proposed and a convergence result is provided. Error estimates are obtained for the semi-Lagrangian scheme. These results can apply to the case of lookback options in finance. Moreover, optimal control problems with maximum cost arise in the characterization of the reachable sets for a system of controlled stochastic differential equations. Some numerical simulations on examples of reachable analysis are included to illustrate our approach.

  16. Intensive exercise program after spinal cord injury ("Full-On"): study protocol for a randomized controlled trial.

    Science.gov (United States)

    Galea, Mary P; Dunlop, Sarah A; Davis, Glen M; Nunn, Andrew; Geraghty, Timothy; Hsueh, Ya-seng Arthur; Churilov, Leonid

    2013-09-11

    Rehabilitation after spinal cord injury (SCI) has traditionally involved teaching compensatory strategies for identified impairments and deficits in order to improve functional independence. There is some evidence that regular and intensive activity-based therapies, directed at activation of the paralyzed extremities, promotes neurological improvement. The aim of this study is to compare the effects of a 12-week intensive activity-based therapy program for the whole body with a program of upper body exercise. A multicenter, parallel group, assessor-blinded randomized controlled trial will be conducted. One hundred eighty-eight participants with spinal cord injury, who have completed their primary rehabilitation at least 6 months prior, will be recruited from five SCI units in Australia and New Zealand. Participants will be randomized to an experimental or control group. Experimental participants will receive a 12-week program of intensive exercise for the whole body, including locomotor training, trunk exercises and functional electrical stimulation-assisted cycling. Control participants will receive a 12-week intensive upper body exercise program. The primary outcome is the American Spinal Injuries Association (ASIA) Motor Score. Secondary outcomes include measurements of sensation, function, pain, psychological measures, quality of life and cost effectiveness. All outcomes will be measured at baseline, 12 weeks, 6 months and 12 months by blinded assessors. Recruitment commenced in January 2011. The results of this trial will determine the effectiveness of a 12-week program of intensive exercise for the whole body in improving neurological recovery after spinal cord injury. NCT01236976 (10 November 2010), ACTRN12610000498099 (17 June 2010).

  17. Instrumentation and control in the Canadian nuclear power program -1989 status

    International Nuclear Information System (INIS)

    Lepp, R.M.

    1990-01-01

    Canada currently has 18 CANDU Pressurized Heavy Water Reactors in operation and 4 under construction, for an installed nuclear capacity of 15,500 MWe. Most of the reactors are in the province of Ontario where 50% of the electricity is nuclear generated. Atomic Energy of Canada is developing the CANDU-3, a 450 MWe reactor incorporating the latest available technologies, including distributed control. The three Canadian Utilities with CANDU reactors have made a major commitment to full-scope training simulators. In Canada there is a growing commitment to developing major improvements to the interface between the control systems, the field equipment and the operating staff. The development program underway makes extensive use of information technology, particularly expert systems and interactive media tools. Out of this will come an advanced CANDU control concept that should further improve the reliability and availability of CANDU stations. (author). 3 refs

  18. Organization of control programs of business

    OpenAIRE

    S.A. Riabichenko

    2011-01-01

    Article is devoted to the need to develop an institutional mechanism of program management of the enterprise. Briefly it is considered the optimal organizational structure in developing and managing innovative programs for the company. The article discusses the advantages of the strong matrix structure (strong matrix) relatively weak matrix structure (weak matrix).

  19. Control-rod parametrical studies in the framework of the PRE-RACINE and RACINE programs

    International Nuclear Information System (INIS)

    Humbert, G.; Ruelle, B.; Daguzan, G.; Stanculescu, A.; Kappler, F.; Scholtyssek, W.; Bouscavet, D.; Martini, M.; Broccoli, U.

    1982-01-01

    A control-rod experimental program is presented. This program, established in the frame of PRE-RACINE and RACINE common DEBENE, Italian and French experiments at MASURCA facility, is still under progress at the moment. The results, limited to single central rod worth are already available. For these experiments, a parametrical approach has been used. The effects of rod worth, varied separatly by rod side, boron enrichment and core size, on experiment to calculation relative discrepancy (E-C)/C can be drawn out

  20. Relationships Between Shame, Restrictiveness, Authoritativeness, and Coercive Control in Men Mandated to a Domestic Violence Offenders Program.

    Science.gov (United States)

    Kaplenko, Hannah; Loveland, Jennifer E; Raghavan, Chitra

    2018-04-01

    Coercive control, a key element of intimate partner violence (IPV), is defined as an abuse dynamic that intends to strip the target of autonomy and liberty. While coercive control is gaining popularity in the research world, little is known about its correlates and causes. This study sought to examine how shame and men's need for dominance, measured by two trait indexes of dominance, restrictiveness and the need for authority, influence coercive control. The present study used a diverse sample of men (n = 134) who were mandated to attend a domestic violence offenders program. Findings suggest that shame plays a role in the commission of coercively controlling behavior both directly and partially through its influence on authority but not through restrictiveness. Implications for understanding IPV in a domestic violence offenders program are discussed.

  1. Structural mode significance using INCA. [Interactive Controls Analysis computer program

    Science.gov (United States)

    Bauer, Frank H.; Downing, John P.; Thorpe, Christopher J.

    1990-01-01

    Structural finite element models are often too large to be used in the design and analysis of control systems. Model reduction techniques must be applied to reduce the structural model to manageable size. In the past, engineers either performed the model order reduction by hand or used distinct computer programs to retrieve the data, to perform the significance analysis and to reduce the order of the model. To expedite this process, the latest version of INCA has been expanded to include an interactive graphical structural mode significance and model order reduction capability.

  2. Optimal Control of Scalar Conservation Laws Using Linear/Quadratic Programming: Application to Transportation Networks

    KAUST Repository

    Li, Yanning

    2014-03-01

    This article presents a new optimal control framework for transportation networks in which the state is modeled by a first order scalar conservation law. Using an equivalent formulation based on a Hamilton-Jacobi (H-J) equation and the commonly used triangular fundamental diagram, we pose the problem of controlling the state of the system on a network link, in a finite horizon, as a Linear Program (LP). We then show that this framework can be extended to an arbitrary transportation network, resulting in an LP or a Quadratic Program. Unlike many previously investigated transportation network control schemes, this method yields a globally optimal solution and is capable of handling shocks (i.e., discontinuities in the state of the system). As it leverages the intrinsic properties of the H-J equation used to model the state of the system, it does not require any approximation, unlike classical methods that are based on discretizations of the model. The computational efficiency of the method is illustrated on a transportation network. © 2014 IEEE.

  3. Optimal Control of Scalar Conservation Laws Using Linear/Quadratic Programming: Application to Transportation Networks

    KAUST Repository

    Li, Yanning; Canepa, Edward S.; Claudel, Christian

    2014-01-01

    This article presents a new optimal control framework for transportation networks in which the state is modeled by a first order scalar conservation law. Using an equivalent formulation based on a Hamilton-Jacobi (H-J) equation and the commonly used triangular fundamental diagram, we pose the problem of controlling the state of the system on a network link, in a finite horizon, as a Linear Program (LP). We then show that this framework can be extended to an arbitrary transportation network, resulting in an LP or a Quadratic Program. Unlike many previously investigated transportation network control schemes, this method yields a globally optimal solution and is capable of handling shocks (i.e., discontinuities in the state of the system). As it leverages the intrinsic properties of the H-J equation used to model the state of the system, it does not require any approximation, unlike classical methods that are based on discretizations of the model. The computational efficiency of the method is illustrated on a transportation network. © 2014 IEEE.

  4. Evaluation of Borama tuberculosis control program in Somaliland, Somalia.

    Science.gov (United States)

    Qayad, Mohamed Gedi; Tarsitani, Gianfranco

    2017-02-28

    The Borama TB program in Somalia lost resources for TB operations in 2003. We evaluated the impact of the loss on the program. Pre-event (2002-2003) and post-event (2007) design were used. All TB patients registered in Borama and a sample of four months from Hargeisa (comparison) TB patients in both periods were abstracted. The following TB treatment outcomes were estimated: treatment success, treatment failure, case fatality, treatment interruption and transfer rates, along with percentage of patients with sputum specimen prior to treatment, percentage of patients from neighboring countries, and monthly average patients enrolled in treatment. The pre-event to post-event outcomes and measures were compared using descriptive and multivariate analyses. In total, 3,367 TB cases were abstracted. In Borama, the TB treatment success rate increased 6% in the post-event. The treatment failure and interruption rates both declined 75%. Monthly average TB patients declined 55%. Percentage of patients smear tested prior to the initiation of the treatment declined 9%. Percentage of TB patients from neighboring countries and other parts of Somalia declined 51%. Treatment interruption/transfer rates declined significantly in the post-event, compared to the pre-event period. Treatment failure/death rate did not change in the post-event period. In Hargeisa, the treatment success, failure/death, and interruption/transfer rates were similar in both periods. The RR did not change in these measures after adjusting for age and gender. This study indicates a significant setback to the Borama TB control program in the majority of measures evaluated, except the TB success rate.

  5. Regulatory quality control in the metal and semi metal environmental monitoring program at IPEN/CNEN-SP

    International Nuclear Information System (INIS)

    Faustino, Mainara G.; Silva, Doulgas Batista; Monteiro, Lucilena R.; Dantas, Elizabeth S.K.; Pires, Maria Aparecida F.; Cotrim, Marycel E.B.

    2013-01-01

    The CONAMA's Resolution 430 recently published in May 13 th of 2011, that completes and modifies the Resolution 357/2005, defined new quality standards to perform liquid effluent monitoring essays in order to allow the release in the public sewer system. This Resolution has established that the essay laboratories must be certified by Brazilian National Metrology, Normalization and Industrial Quality Institute - INMETRO and also count with an implemented quality control system. Thereby this publication affected directly IPEN's Environmental Monitoring Program of Stables Chemical Compound (PMA-Q), performed since 2007. In this program, 20 parameters related to the metallic and non-metallic chemical elements content are monitored by using sensitive analytical techniques such as graphite furnace atomic absorption spectrometry - GF-AAS or inductively coupled plasma spectrometry - ICP-OES. Therefore this paper presents improvements to determine the laboratory individual performance performed by GF-AAS and ICP-OES. To achieve the legislation compliance for these parameters, the following actions were implemented: the construction of control charts (internal quality control) and the participation of the laboratory in interlaboratory proficiency tests (external quality control). These actions are presented and discussed with the results of elements such as Arsenic and Lead that are analyzed through GF-AAS as well as Chromium, Cooper, Zinc, Iron and Nickel, that are analyzed through ICP-OES. These actions of quality control allowed the continuous monitoring of laboratory performance, the identification and resolution of analytic problems and interlaboratory differences, provide additional confidence to monitoring program. (author)

  6. Optimal blood glucose level control using dynamic programming based on minimal Bergman model

    Science.gov (United States)

    Rettian Anggita Sari, Maria; Hartono

    2018-03-01

    The purpose of this article is to simulate the glucose dynamic and the insulin kinetic of diabetic patient. The model used in this research is a non-linear Minimal Bergman model. Optimal control theory is then applied to formulate the problem in order to determine the optimal dose of insulin in the treatment of diabetes mellitus such that the glucose level is in the normal range for some specific time range. The optimization problem is solved using dynamic programming. The result shows that dynamic programming is quite reliable to represent the interaction between glucose and insulin levels in diabetes mellitus patient.

  7. Explicit/multi-parametric model predictive control (MPC) of linear discrete-time systems by dynamic and multi-parametric programming

    KAUST Repository

    Kouramas, K.I.; Faí sca, N.P.; Panos, C.; Pistikopoulos, E.N.

    2011-01-01

    This work presents a new algorithm for solving the explicit/multi- parametric model predictive control (or mp-MPC) problem for linear, time-invariant discrete-time systems, based on dynamic programming and multi-parametric programming techniques

  8. Space Station Engineering and Technology Development. Proceedings of the Panel on Program Performance and Onboard Mission Control

    Science.gov (United States)

    1985-01-01

    An ad-hoc committee was asked to review the following questions relevant to the space station program: (1) onboard maintainability and repair; (2) in-space research and technology program and facility plans; (3) solar thermodynamic research and technology development program planning; (4) program performance (cost estimating, management, and cost avoidance); (5) onboard versus ground-based mission control; and (6) technology development road maps from IOC to the growth station. The objective of these new assignments is to provide NASA with advice on ways and means for improving the content, performance, and/or effectiveness of these elements of the space station program.

  9. The quality control program for an Ontario Hydro operated thermoluminescence dosimetry service at nuclear generating stations

    International Nuclear Information System (INIS)

    Orr, B.H.; Walsh, M.L.

    1975-11-01

    An essential aspect of the Ontario Hydro TLD service is the operation of an acceptable quality control (QC) program. The QC program which has been generally accepted by the A.E.C.B. is presented in this document. The aims of the program are as follows: (1) to ensure that Ontario Hydro maintains an acceptable standard of dosimetry; (2) to be able to demonstrate to any interested party that the dose measurements for individual workers have a high degree of credibility. (author)

  10. Air Vehicle Technology Integration Program (AVTIP) Delivery Order 0015: Open Control Platform (OCP) Software Enabled Control (SEC) Hardware in the Loop Simulation - OCP Hardware Integration

    National Research Council Canada - National Science Library

    Paunicka, James L

    2005-01-01

    ...) project sponsored by the DARPA Software Enabled Control (SEC) Program. The purpose of this project is to develop the capability to be an OCP test-bed and to evaluate the OCP controls and simulation environment for a specific test case...

  11. The effect of a national control program on mastitis occurence in the Netherlands

    NARCIS (Netherlands)

    Borne, van den B.H.P.; Lam, T.G.J.M.; Sampimon, O.C.; Jansen, J.; Schalk, G.

    2011-01-01

    A 5-year national mastitis control program was initiated in the Netherlands in 2005. Knowledge transfer and improvements of dairy farmers’ motivation towards udder health were used as means to decrease mastitis occurrence in Dutch dairy herds. The aim of this study was to determine the effect of the

  12. Control program of the neutron four-circle-diffractometer P32 at the SILOE reactor/CEN Grenoble

    International Nuclear Information System (INIS)

    Guth, H.; Paulus, H.; Reimers, W.; Heger, G.

    1983-09-01

    The four-circle diffractometer P32 for elastic neutron scattering on single crystals was installed at the SILOE reactor/CEN Grenoble in 1981. The control program, presented here, is a new update of the former program versions used at the FR2 reactor/Kernforschungszentrum Karlsruhe. Important improvements concerning reliability and handling of the diffractometer are added. (orig.) [de

  13. A 12-week commercial web-based weight-loss program for overweight and obese adults: randomized controlled trial comparing basic versus enhanced features.

    Science.gov (United States)

    Collins, Clare E; Morgan, Philip J; Jones, Penelope; Fletcher, Kate; Martin, Julia; Aguiar, Elroy J; Lucas, Ashlee; Neve, Melinda J; Callister, Robin

    2012-04-25

    The development and use of Web-based programs for weight loss is increasing rapidly, yet they have rarely been evaluated using randomized controlled trials (RCTs). Interestingly, most people who attempt weight loss use commercially available programs, yet it is very uncommon for commercial programs to be evaluated independently or rigorously. To compare the efficacy of a standard commercial Web-based weight-loss program (basic) versus an enhanced version of this Web program that provided additional personalized e-feedback and contact from the provider (enhanced) versus a wait-list control group (control) on weight outcomes in overweight and obese adults. This purely Web-based trial using a closed online user group was an assessor-blinded RCT with participants randomly allocated to the basic or enhanced 12-week Web-based program, based on social cognitive theory, or the control, with body mass index (BMI) as the primary outcome. We enrolled 309 adults (129/309, 41.8% male, BMI mean 32.3, SD 4 kg/m(2)) with 84.1% (260/309) retention at 12 weeks. Intention-to-treat analysis showed that both intervention groups reduced their BMI compared with the controls (basic: -0.72, SD 1.1 kg/m(2), enhanced: -1.0, SD 1.4, control: 0.15, SD 0.82; P 3.0, SD 4.1, control: 0.4, SD 2.3; P 3.0; P Web-based weight-loss program can be efficacious across a range of weight-related outcomes and lifestyle behaviors and achieve clinically important weight loss. Although the provision of additional personalized feedback did not facilitate greater weight loss after 12 weeks, the impact of superior participant retention on longer-term outcomes requires further study. Further research is required to determine the optimal mix of program features that lead to the biggest treatment impact over time. Australian New Zealand Clinical Trials Registry (ANZCTR): 12610000197033.

  14. A cost/schedule and control system for the environmental restoration program Albuquerque Field Office

    International Nuclear Information System (INIS)

    Fiske, Wanda S.; Bischoff, Edward L.; Rea, Kenneth H.; Dwain Farley, P.; Biedermann, Charles A.

    1992-01-01

    The Department of Energy (DOE) Field Office Albuquerque (AL), Environmental Restoration Project Office (ERPO), has developed a project management system used to plan, document, and control Environmental Restoration (ER) work at eight installations and one superfund site managed by AL. This system emphasizes control of the cost, schedule, and technical elements of the Program. It supports programmatic documentation such as the Environmental Restoration/Waste Management Five-Year Plan, Site Specific Plan, and budget requests. The System provides information used to manage the ER Program at all levels of management (i.e., from low-level day-to-day activities to high-level upper management). The System requires substantial effort to ensure reliability; however, the benefit to ERPO is an effective, proactive project management tool. This paper provides an overview of the ERPO System, an explanation of how it is implemented, and lessons learned from this process. Application of the System to cost estimating, annual and five-year budget preparation, resource projections, scheduling, and cost/schedule performance measurement is discussed. Also discussed are cost/schedule review procedures, along with variance identification and resolution. Examples are taken from the Pinellas ER Program. (author)

  15. Physical activity and nutrition behavioural outcomes of a home-based intervention program for seniors: a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Burke Linda

    2013-01-01

    Full Text Available Abstract Background This intervention aimed to ascertain whether a low-cost, accessible, physical activity and nutrition program could improve physical activity and nutrition behaviours of insufficiently active 60–70 year olds residing in Perth, Australia. Methods A 6-month home-based randomised controlled trial was conducted on 478 older adults (intervention, n = 248; control, n = 230 of low to medium socioeconomic status. Both intervention and control groups completed postal questionnaires at baseline and post-program, but only the intervention participants received project materials. A modified fat and fibre questionnaire measured nutritional behaviours, whereas physical activity was measured using the International Physical Activity Questionnaire. Generalised estimating equation models were used to assess the repeated outcomes over both time points. Results The final sample consisted of 176 intervention participants and 199 controls (response rate 78.5% with complete data. After controlling for demographic and other confounding factors, the intervention group demonstrated increased participation in strength exercise (p Conclusions A minimal contact, low-cost and home-based physical activity program can positively influence seniors’ physical activity and nutrition behaviours. Trial registration anzctr.org.au Identifier: ACTRN12609000735257

  16. Engaging rural women in healthy lifestyle programs: insights from a randomized controlled trial.

    Science.gov (United States)

    Kozica, Samantha L; Harrison, Cheryce L; Teede, Helena J; Ng, Sze; Moran, Lisa J; Lombard, Catherine B

    2015-09-16

    The obesity epidemic is well established, particularly in rural settings. Programs promoting healthy lifestyles for rural women are urgently needed; however, participant engagement is challenging. In the context of a large randomized controlled trial targeting the prevention of weight gain in rural women, we explored successful recruitment strategies and aimed to understand participants' barriers, enablers and reasons for program participation. We recruited women (aged 18-55 years) from the general rural Australian population. A mixed-methods approach was applied to explore factors that influenced program participation, including quantitative questionnaires for all participants (n = 649) and qualitative semi-structured interviews conducted for a subgroup of participants (n = 45). Data were collected at three time points: baseline, 6 and 12 months post program commencement. We recruited 649 rural women through a community communication and partnering strategy, a program marketing campaign and mobilization of social networks. Program participants were diverse across education and income levels and were representative of the wider Australian regional population. Factors that influenced program engagement were divided into personal (perceived program benefits and program accessibility) and social (peer persuasion and support). Identified enablers included convenience of the program location, perceived program utility, such as weight management and optimization of lifestyle choices, as well as attending the program with peer support. Barriers to engagement, which are likely exacerbated in rural communities included lack of anonymity, self-consciousness and segregated social networks in rural settings. Participants reported that eliciting local support and maximizing publicity is fundamental to improving future program engagement. Multiple program promotion strategies including communication, marketing and partnering, as well as mobilization of social networks and peer

  17. Controlled sample program publication No. 1: characterization of rock samples

    International Nuclear Information System (INIS)

    Ames, L.L.

    1978-10-01

    A description is presented of the methodology used and the geologic parameters measured on several rocks which are being used in round-robin laboratory and nuclide adsorption methodology experiments. Presently investigators from various laboratories are determining nuclide distribution coefficients utilizing numerous experimental techniques. Unfortunately, it appears that often the resultant data are dependent not only on the type of groundwater and rock utilized, but also on the experimentor or method used. The Controlled Sample Program is a WISAP (Waste Isolation Safety Assessment Program) attempt to resolve the apparent method and dependencies and to identify individual experimenter's bias. The rock samples characterized in an interlaboratory Kd methodology comparison program include Westerly granite, Argillaceous shale, Oolitic limestone, Sentinel Gap basalt, Conasauga shale, Climax Stock granite, anhydrite, Magenta dolomite and Culebra dolomite. Techniques used in the characterization include whole rock chemical analysis, X-ray diffraction, optical examination, electron microprobe elemental mapping, and chemical analysis of specific mineral phases. Surface areas were determined by the B.E.T. and ethylene glycol sorption methods. Cation exchange capacities were determined with 85 Sr, but were of questionable value for the high calcium rocks. A quantitative mineralogy was also estimated for each rock. Characteristics which have the potential of strongly affecting radionuclide Kd values such as the presence of sulfides, water-soluble, pH-buffering carbonates, glass, and ferrous iron were listed for each rock sample

  18. Vector control programs in Saint Johns County, Florida and Guayas, Ecuador: successes and barriers to integrated vector management.

    Science.gov (United States)

    Naranjo, Diana P; Qualls, Whitney A; Jurado, Hugo; Perez, Juan C; Xue, Rui-De; Gomez, Eduardo; Beier, John C

    2014-07-02

    Vector-borne diseases (VBDs) and mosquito control programs (MCPs) diverge in settings and countries, and lead control specialists need to be aware of the most effective control strategies. Integrated Vector Management (IVM) strategies, once implemented in MCPs, aim to reduce cost and optimize protection of the populations against VBDs. This study presents a strengths, weaknesses, opportunities, and threats (SWOT) analysis to compare IVM strategies used by MCPs in Saint Johns County, Florida and Guayas, Ecuador. This research evaluates MCPs strategies to improve vector control activities. Methods included descriptive findings of the MCP operations. Information was obtained from vector control specialists, directors, and residents through field trips, surveys, and questionnaires. Evaluations of the strategies and assets of the control programs where obtained through SWOT analysis and within an IVM approach. Organizationally, the Floridian MCP is a tax-based District able to make decisions independently from county government officials, with the oversight of an elected board of commissioners. The Guayas program is directed by the country government and assessed by non-governmental organizations like the World health Organization. Operationally, the Floridian MCP conducts entomological surveillance and the Ecuadorian MCP focuses on epidemiological monitoring of human disease cases. Strengths of both MCPs were their community participation and educational programs. Weaknesses for both MCPs included limitations in budgets and technical capabilities. Opportunities, for both MCPs, are additional funding and partnerships with private, non-governmental, and governmental organizations. Threats experienced by both MCPs included political constraints and changes in the social and ecological environment that affect mosquito densities and control efforts. IVM pillars for policy making were used to compare the information among the programs. Differences included how the Ecuadorian

  19. Vector control programs in Saint Johns County, Florida and Guayas, Ecuador: successes and barriers to integrated vector management

    Science.gov (United States)

    2014-01-01

    Background Vector-borne diseases (VBDs) and mosquito control programs (MCPs) diverge in settings and countries, and lead control specialists need to be aware of the most effective control strategies. Integrated Vector Management (IVM) strategies, once implemented in MCPs, aim to reduce cost and optimize protection of the populations against VBDs. This study presents a strengths, weaknesses, opportunities, and threats (SWOT) analysis to compare IVM strategies used by MCPs in Saint Johns County, Florida and Guayas, Ecuador. This research evaluates MCPs strategies to improve vector control activities. Methods Methods included descriptive findings of the MCP operations. Information was obtained from vector control specialists, directors, and residents through field trips, surveys, and questionnaires. Evaluations of the strategies and assets of the control programs where obtained through SWOT analysis and within an IVM approach. Results Organizationally, the Floridian MCP is a tax-based District able to make decisions independently from county government officials, with the oversight of an elected board of commissioners. The Guayas program is directed by the country government and assessed by non-governmental organizations like the World health Organization. Operationally, the Floridian MCP conducts entomological surveillance and the Ecuadorian MCP focuses on epidemiological monitoring of human disease cases. Strengths of both MCPs were their community participation and educational programs. Weaknesses for both MCPs included limitations in budgets and technical capabilities. Opportunities, for both MCPs, are additional funding and partnerships with private, non-governmental, and governmental organizations. Threats experienced by both MCPs included political constraints and changes in the social and ecological environment that affect mosquito densities and control efforts. IVM pillars for policy making were used to compare the information among the programs. Differences

  20. A perturbation-based balance training program for older adults: study protocol for a randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Peters Amy L

    2007-05-01

    Full Text Available Abstract Background Previous research investigating exercise as a means of falls prevention in older adults has shown mixed results. Lack of specificity of the intervention may be an important factor contributing to negative results. Change-in-support (CIS balance reactions, which involve very rapid stepping or grasping movements of the limbs, play a critical role in preventing falls; hence, a training program that improves ability to execute effective CIS reactions could potentially have a profound effect in reducing risk of falling. This paper describes: 1 the development of a perturbation-based balance training program that targets specific previously-reported age-related impairments in CIS reactions, and 2 a study protocol to evaluate the efficacy of this new training program. Methods/Design The training program involves use of unpredictable, multi-directional moving-platform perturbations to evoke stepping and grasping reactions. Perturbation magnitude is gradually increased over the course of the 6-week program, and concurrent cognitive and movement tasks are included during later sessions. The program was developed in accordance with well-established principles of motor learning, such as individualisation, specificity, overload, adaptation-progression and variability. Specific goals are to reduce the frequency of multiple-step responses, reduce the frequency of collisions between the stepping foot and stance leg, and increase the speed of grasping reactions. A randomised control trial will be performed to evaluate the efficacy of the training program. A total of 30 community-dwelling older adults (age 64–80 with a recent history of instability or falling will be assigned to either the perturbation-based training or a control group (flexibility/relaxation training, using a stratified randomisation that controls for gender, age and baseline stepping/grasping performance. CIS reactions will be tested immediately before and after the six

  1. Optimal blood glucose control in diabetes mellitus treatment using dynamic programming based on Ackerman’s linear model

    Science.gov (United States)

    Pradanti, Paskalia; Hartono

    2018-03-01

    Determination of insulin injection dose in diabetes mellitus treatment can be considered as an optimal control problem. This article is aimed to simulate optimal blood glucose control for patient with diabetes mellitus. The blood glucose regulation of diabetic patient is represented by Ackerman’s Linear Model. This problem is then solved using dynamic programming method. The desired blood glucose level is obtained by minimizing the performance index in Lagrange form. The results show that dynamic programming based on Ackerman’s Linear Model is quite good to solve the problem.

  2. An instrument control and data analysis program for imaging and in vivo spectroscopy

    International Nuclear Information System (INIS)

    Roos, M.S.; Mushlin, R.A.; Veklerov, E.; Port, J.D.; Ladd, C.; Harrison, C.G.

    1987-01-01

    The spectrometer control data processing environment and the libraries of macros designed are used to support imaging and in vivo spectroscopy at the Lawrence Berkeley Laboratory, the Massachusetts Institute of Technology, and the Brigham and Women's Hospital in systems ranging from a 2-T animal spectrometer to a 0.5-T whole body imager. Experiments that have been successfully implemented include multi-slice, multi-echo imaging fast steady state free precession imaging and 31 P spectroscopy. The flexibility of the macro programming structure allowed very rapid development of these macro libraries. We have demonstrated that instrumentation developed around standard hosts, buses, and operating systems can yield research tools with performance comparable to highly specialized systems. The combination of low macro instruction overhead, provision of user access to system internals, and a rich command set controlling basic acquisition and processing functions provides a foundation on which libraries of macros may be built to serve a broad range of users, perhaps more easily than a system with larger sets of less primitive commands and a more limited batch processor. Well defined program interfaces for macros and for installing commands, as well as the ability to modify instrument control code significantly broaden the range of experiments accessible to the researcher

  3. Environmental Radiological Impact of Nuclear Power. Monitoring and Control Programs

    International Nuclear Information System (INIS)

    Ramos, L. M.

    2000-01-01

    Radioactive contamination of the environment and public exposure to ionizing radiation may result from releases from programmed or accidental operations in regulated activities, or they may be due to preexisting situations such as contamination caused by past accidents, radioactive rain caused by nuclear tests, or increased natural radioactivity resulting from human activities. In many cases, both the emission sources and the environment should be monitored to determine the risk to the population and verify to what extent the limits and conditions established by competent authorities are being observed. Monitoring can be divided into three categories: monitoring of the emission source, of the receiving medium and of members of the public; individual monitoring of the population is extremely rare and would only be considered when estimated doses substantially exceed the annual public dose limit. In practices likely to produce significant radioactive releases, as is the case of nuclear fuel cycle facilities, the limits and conditions for monitoring and controlling them and the requirements for environmental radiological monitoring are established in the licensing process. Programs implemented during normal operation of the facilities form the basis for monitoring in the event of accidents. in addition to environmental radiological monitoring associated with facilities, different countries have monitoring programs outside the facilities zones of influence, in order to ascertain the nationwide radiological fund and determine possible increases in this fund. In Spain, the facilities that generate radioactive waste have effluent storage, treatment and removal systems and radiological monitoring programs based on site and discharge characteristics. The environmental radiological monitoring system is composed of the network implemented by the owners in the nuclear fuel cycle facilities zones of influence, and by nationwide monitoring networks managed by the Consejo de

  4. Development of Geometrical Quality Control Real-time Analysis Program using an Electronic Portal Imaging

    International Nuclear Information System (INIS)

    Lee, Sang Rok; Jung, Kyung Yong; Jang, Min Sun; Lee, Byung Gu; Kwon, Young Ho

    2012-01-01

    To develop a geometrical quality control real-time analysis program using an electronic portal imaging to replace film evaluation method. A geometrical quality control item was established with the Eclipse treatment planning system (Version 8.1, Varian, USA) after the Electronic Portal Imaging Device (EPID) took care of the problems occurring from the fixed substructure of the linear accelerator (CL-iX, Varian, USA). Electronic portal image (single exposure before plan) was created at the treatment room's 4DTC (Version 10.2, Varian, USA) and a beam was irradiated in accordance with each item. The gaining the entire electronic portal imaging at the Off-line review and was evaluated by a self-developed geometrical quality control real-time analysis program. As for evaluation methods, the intra-fraction error was analyzed by executing 5 times in a row under identical conditions and procedures on the same day, and in order to confirm the infer-fraction error, it was executed for 10 days under identical conditions of all procedures and was compared with the film evaluation method using an Iso-align quality control device. Measurement and analysis time was measured by sorting the time into from the device setup to data achievement and the time amount after the time until the completion of analysis and the convenience of the users and execution processes were compared. The intra-fraction error values for each average 0.1, 0.2, 0.3, 0.2 mm at light-radiation field coincidence, collimator rotation axis, couch rotation axis and gantry rotation axis. By checking the infer-fraction error through 10 days of continuous quality control, the error values obtained were average 1.7, 1.4, 0.7, 1.1 mm for each item. Also, the measurement times were average 36 minutes, 15 minutes for the film evaluation method and electronic portal imaging system, and the analysis times were average 30 minutes, 22 minutes. When conducting a geometrical quality control using an electronic portal imaging

  5. Advanced Emissions Control Development Program: Mercury Control

    International Nuclear Information System (INIS)

    Evans, A.P.; Redinger, K.W.; Holmes, M.J.

    1997-07-01

    McDermott Technology, Inc. (a subsidiary of Babcock ampersand Wilcox) is conducting the Advanced Emissions Control Development Project (AECDP) which is aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (HAPS) from coal-fired electric utility plants. The need for such controls may arise as the US Environmental Protection Agency (EPA) proceeds with implementation of requirements set forth in the Clean Air Act Amendments (CAAA's) of 1990. Promulgation of air toxics emissions regulations for electric utility plants could dramatically impact utilities burning coal, their industrial and residential customers, and the coal industry. AECDP project work will supply the information needed by utilities to respond to potential HAPs regulations in a timely, cost-effective, enviromnentally-sound manner which supports the continued use of the Nation's abundant reserves of coal, such as those in the State of Ohio. The development work is being carried out using the 10 MW Clean Environment Development Facility wherein air toxics emissions control strategies can be developed under controlled conditions. The specific objectives of the project are to (1) measure and understand production and partitioning of air toxics species for a variety of coals, (2) optimize the air toxics removal performance of conventional flue gas cleanup systems, (3) develop advanced air toxics emissions control concepts, (4) develop and validate air toxics emissions measurement and monitoring techniques, and (5) establish a comprehensive, self-consistent air toxics data library. This project is supported by the Department of Energy, the Ohio Coal Development Office within the Ohio Department of Development and Babcock ampersand Wilcox. A comprehensive assessment of HAP emissions from coal-fired electric utility boilers sponsored by the Department of Energy and the Electric Power Research Institute concluded that with the exception of

  6. Development and implementation of documents control and records management system for KNPP units 5 and 6 modernization program

    International Nuclear Information System (INIS)

    Manchev, B.L.; Ilieva, M.; Nenkova, B. G. . E-mail of corresponding author: ilieva@riskeng.bg; Ilieva, M.)

    2005-01-01

    It was proposed to KNPP to develop and implement a Dcuments Control and Records Management System for an efficient and effective Configuration Management (CM) Program. It will provide reasonable assurance that consistency among design requirements, physical configuration and facility documentation is established and maintained during the Modernization Program and throughout the life of KNPP Units 5 and 6. The fully implemented CM Program will consider and track the modifications resulting from the Units 5 and 6 Modernization Program and will be consistent with internationally recognized principles and customized to fit within the KNPP organizational structure and philosophy (ANSI/NIRMA CM 1.0 - 2000, Configuration Management Of Nuclear Facilities). Development and implementation phase of Documents Control and Records Management System and SmartDoc information system, as well as ideas for further development are presented in this report. (author)

  7. Implementation of a quality control program for a 6 MeV linear photon accelerator; Implantacao de um programa de controle de qualidade de um acelerador linear de 6 MeV de fotons

    Energy Technology Data Exchange (ETDEWEB)

    Berdaky, Mafalda F. [Centro Brasileiro de Radioterapia, Oncologia e Mastologia (CEBROM), Goiania, GO (Brazil); Caldas, Linda V.E. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: lcaldas@net.ipen.br

    2001-10-01

    This paper describes the operational characteristics of the final process of implementation of a quality control program using routine mechanical and radiation tests. The quality control program was performed during 35 months and demonstrated the excellent stability of this accelerator. (author)

  8. Effectiveness of a psycho-oncology training program for oncology nurses: a randomized controlled trial.

    Science.gov (United States)

    Kubota, Yosuke; Okuyama, Toru; Uchida, Megumi; Umezawa, Shino; Nakaguchi, Tomohiro; Sugano, Koji; Ito, Yoshinori; Katsuki, Fujika; Nakano, Yumi; Nishiyama, Takeshi; Katayama, Yoshiko; Akechi, Tatsuo

    2016-06-01

    Oncology nurses are expected to play an important role in psychosocial care for cancer patients. The aim of this study was to examine whether a novel training program aimed at enhancing oncology nurses' ability to assess and manage common psychological problems in cancer patients would improve participants' self-reported confidence, knowledge, and attitudes regarding care of patients with common psychological problems (trial register: UMIN000008559). Oncology nurses were assigned randomly to either the intervention group (N = 50) or the waiting list control group (N = 46). The intervention group received a 16-h program, the content of which focused on four psychological issues: normal reactions, clinically significant distress, suicidal thoughts, and delirium. Each session included a role-play exercise, group work, and didactic lecture regarding assessment and management of each problem. Primary outcomes were changes in self-reported confidence, knowledge, and attitudes toward the common psychological problems between pre-intervention and 3 months post-intervention. Secondary outcomes were job-related stress and burnout. Intervention acceptability to participants was also assessed. In the intervention group, confidence and knowledge but not attitudes were significantly improved relative to the control group. No significant intervention effects were found for job- related stress and burnout. A high percentage (98%) of participants considered the program useful in clinical practice. This psycho-oncology training program improved oncology nurses' confidence and knowledge regarding care for patients with psychological problems. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

  9. Development of special ionization chambers for a quality control program in mammography

    International Nuclear Information System (INIS)

    Silva, Jonas Oliveira da

    2013-01-01

    Mammography is an imaging method that uses X-rays. The use of ionization chambers in mammography quality control programs presents an essential role which is to verify whether the parameters of the patient exposure are correct. However, the commercial ionization chambers for dosimetry in mammography represent a high cost for small and medium size clinics that wish to have this equipment or for professionals that work with quality control programs. The innovative feature of this work was to develop ionization chambers for this purpose. In this work ionization chambers for X radiation beams in the mammography energy range were designed, constructed and characterized. The ionization chambers were tested in standard X radiation beams at the LCI/IPEN. The main characterization tests performed with the ionization chambers were: saturation curve, linearity of response, angular and energy dependence. The response stability tests of the ionization chambers were also conducted at the LCI, presenting results within 2.0 % for long-term stability. The results of the remaining tests are in accordance with international standards. These ionization chambers were also submitted to quality control tests of mammography equipment: linearity of the air kerma rates, determination of half-value layers and mean glandular doses. The results for air kerma rate linearity were less than 10 %, as recommended in international standards. The mean glandular dose obtained with the developed chambers presented values comparable to those of commercial ionization chambers tested, with an estimated variation within international standards. (author)

  10. Policy Iteration for $H_\\infty $ Optimal Control of Polynomial Nonlinear Systems via Sum of Squares Programming.

    Science.gov (United States)

    Zhu, Yuanheng; Zhao, Dongbin; Yang, Xiong; Zhang, Qichao

    2018-02-01

    Sum of squares (SOS) polynomials have provided a computationally tractable way to deal with inequality constraints appearing in many control problems. It can also act as an approximator in the framework of adaptive dynamic programming. In this paper, an approximate solution to the optimal control of polynomial nonlinear systems is proposed. Under a given attenuation coefficient, the Hamilton-Jacobi-Isaacs equation is relaxed to an optimization problem with a set of inequalities. After applying the policy iteration technique and constraining inequalities to SOS, the optimization problem is divided into a sequence of feasible semidefinite programming problems. With the converged solution, the attenuation coefficient is further minimized to a lower value. After iterations, approximate solutions to the smallest -gain and the associated optimal controller are obtained. Four examples are employed to verify the effectiveness of the proposed algorithm.

  11. Tuberculosis control program in the municipal context: performance evaluation.

    Science.gov (United States)

    Arakawa, Tiemi; Magnabosco, Gabriela Tavares; Andrade, Rubia Laine de Paula; Brunello, Maria Eugenia Firmino; Monroe, Aline Aparecida; Ruffino-Netto, Antonio; Scatena, Lucia Marina; Villa, Tereza Cristina Scatena

    2017-03-30

    The objective of this study is to evaluate the performance of the Tuberculosis Control Program in municipalities of the State of São Paulo. This is a program evaluation research, with ecological design, which uses three non-hierarchical groups of the municipalities of the State of São Paulo according to their performance in relation to operational indicators. We have selected 195 municipalities with at least five new cases of tuberculosis notified in the Notification System of the State of São Paulo and with 20,000 inhabitants or more in 2010. The multiple correspondence analysis was used to identify the association between the groups of different performances, the epidemiological and demographic characteristics, and the characteristics of the health systems of the municipalities. The group with the worst performance showed the highest rates of abandonment (average [avg] = 10.4, standard deviation [sd] = 9.4) and the lowest rates of supervision of Directly Observed Treatment (avg = 6.1, sd = 12.9), and it was associated with low incidence of tuberculosis, high tuberculosis and HIV, small population, high coverage of the Family Health Strategy/Program of Community Health Agents, and being located on the countryside. The group with the best performance presented the highest cure rate (avg = 83.7, sd = 10.5) and the highest rate of cases in Directly Observed Treatment (avg = 83.0, sd = 12.7); the group of regular performance showed regular results for outcome (avg cure = 79.8, sd = 13.2; abandonment avg = 9.5, sd = 8.3) and supervision of the Directly Observed Treatment (avg = 42.8, sd = 18.8). Large population, low coverage of the Family Health Strategy/Program of Community Health Agents, high incidence of tuberculosis and AIDS, and being located on the coast and in metropolitan areas were associated with these groups. The findings highlight the importance of the Directly Observed Treatment in relation to the outcome for treatment and raise reflections on the

  12. The effect on cross sections for Quad Cities by introducing control rod history in the assembly program LEWARD

    International Nuclear Information System (INIS)

    Nonboel, E.

    1989-08-01

    This paper shows the effect on the 2-group neutron cross sections for the BWR reactor Quad Cities by introducing control rod ''history'' in the assembly program LEWARD. Control rod ''history'' is a concept which accounts for the movement of control rods during operation. (author)

  13. Evaluating the impact of a disease management program for chronic complex conditions at two large northeast health plans using a control group methodology.

    Science.gov (United States)

    Schwerner, Henry; Mellody, Timothy; Goldstein, Allan B; Wansink, Daryl; Sullivan, Virginia; Yelenik, Stephan N; Charlton, Warwick; Lloyd, Kelley; Courtemanche, Ted

    2006-02-01

    The objective of this study was to observe trends in payer expenditures for plan members with one of 14 chronic, complex conditions comparing one group with a disease management program specific to their condition (the intervention group) and the other with no specific disease management program (the control group) for these conditions. The authors used payer claims and membership data to identify members eligible for the program in a 12-month baseline year (October 2001 to September 2002) and a subsequent 12-month program year (October 2002 to September 2003). Two payers were analyzed: one health plan with members primarily in New Jersey (AmeriHealth New Jersey [AHNJ]), where the disease management program was offered, and one affiliated large plan with members primarily in the metro Philadelphia area, where the program was not offered. The claims payment policy for both plans is identical. Intervention and control groups were analyzed for equivalence. The analysis was conducted in both groups over identical time periods. The intervention group showed statistically significant (p control group. Intervention group members showed a reduction in expenditures of -8%, while control group members showed an increase of +10% over identical time periods. Subsequent analyses controlling for outliers and product lines served to confirm the overall results. The disease management program is likely responsible for the observed difference between the intervention and control group results. A well-designed, targeted disease management program offered by a motivated, supportive health plan can play an important role in cost improvement strategies for members with complex, chronic conditions.

  14. Core elements of hospital antibiotic stewardship programs from the Centers for Disease Control and Prevention.

    Science.gov (United States)

    Pollack, Loria A; Srinivasan, Arjun

    2014-10-15

    The proven benefits of antibiotic stewardship programs (ASPs) for optimizing antibiotic use and minimizing adverse events, such as Clostridium difficile and antibiotic resistance, have prompted the Centers for Disease Control and Prevention (CDC) to recommend that all hospitals have an ASP. This article summarizes Core Elements of Hospital Antibiotic Stewardship Programs, a recently released CDC document focused on defining the infrastructure and practices of coordinated multidisciplinary programs to improve antibiotic use and patient care in US hospitals. Published by Oxford University Press on behalf of the Infectious Diseases Society of America 2014. This work is written by (a) US Government employee(s) and is in the public domain in the US.

  15. Petri Nets Based Modelling of Control Flow for Memory-Aid Interactive Programs in Telemedicine

    CERN Document Server

    Khoromskaia, V K

    2004-01-01

    Petri Nets (PN) based modelling of the control flow for the interactive memory assistance programs designed for personal pocket computers and having special requirements for robustness is considered. The proposed concept allows one to elaborate the programs which can give users a variety of possibilities for a day-time planning in the presence of environmental and time restrictions. First, a PN model for a known simple algorithm is constructed and analyzed using the corresponding state equations and incidence matrix. Then a PN graph for a complicated algorithm with overlapping actions and choice possibilities is designed, supplemented by an example of its analysis. Dynamic behaviour of this graph is tested by tracing of all possible paths of the flow of control using the PN simulator. It is shown that PN based modelling provides reliably predictable performance of interactive algorithms with branched structures and concurrency requirements.

  16. US/Russian program in materials protection, control and accounting at the RRC Kurchatov Institute: 1997--1998

    International Nuclear Information System (INIS)

    Sukhoruchkin, V.; Rumyantsev, A.; Shmelev, V.

    1998-01-01

    Six US Department of Energy Laboratories are carrying out a program of cooperation with the Russian Research Center Kurchatov Institute to improve nuclear material protection, control and accounting (MPC and A) at Kurchatov. In 1997--1998 the primary thrust of this program has been directed to Building 106, which houses a number of test reactors and critical facilities. Substantial improvements in physical protection, upgrades in the physical inventory taking procedures, installation of equipment for the computerized materials accounting system, and installation of nuclear material portal monitors and neutron-based measurement equipment are being carried out at this facility. Software for the computerized accounting system, named KI-MACS, has been developed at Kurchatov and the system has been fully integrated with the bar code printing and reading equipment, electronic scales, and nondestructive assay equipment provided under this program. Additional 1997--1998 activities at Kurchatov include continuation of a tamper indicating device program, vulnerability assessments of several facilities, hosting of a Russian-American Workshop on Fissile Material Control and Accountability at Critical Facilities, and the development of accounting procedures for transfers of nuclear materials between material balance areas

  17. Comparison of mosquito control programs in seven urban sites in Africa, the Middle East, and the Americas

    Science.gov (United States)

    Impoinvil, Daniel E.; Ahmad, Sajjad; Troyo, Adriana; Keating, Joseph; Githeko, Andrew K.; Mbogo, Charles M; Kibe, Lydiah; Githure, John I.; Gad, Adel M.; Hassan, Ali N.; Orshan, Laor; Warburg, Alon; Calderón-Arguedas, Olger; Sánchez-Loría, Victoria M.; Velit-Suarez, Rosanna; Chadee, Dave D.; Novak, Robert J.; Beier, John C.

    2007-01-01

    Mosquito control programs at seven urban sites in Kenya, Egypt, Israel, Costa Rica, and Trinidad are described and compared. Site-specific urban and disease characteristics, organizational diagrams, and strengths, weaknesses, obstacles and threats (SWOT) analysis tools are used to provide a descriptive assessment of each mosquito control program, and provide a comparison of the factors affecting mosquito abatement. The information for SWOT analysis is collected from surveys, focus group discussions, and personal communication. SWOT analysis identified various issues affecting the efficiency and sustainability of mosquito control operations. The main outcome of our work was the description and comparison of mosquito control operations within the context of each study site’s biological, social, political, management, and economic conditions. The issues identified in this study ranged from lack of inter-sector collaboration to operational issues of mosquito control efforts. A lack of sustainable funding for mosquito control was a common problem for most sites. Many unique problems were also identified, which included lack of mosquito surveillance, lack of law enforcement, and negative consequences of human behavior. Identifying common virtues and shortcomings of mosquito control operations is useful in identifying “best practices” for mosquito control operations, thus leading to better control of mosquito biting and mosquito-borne disease transmission. PMID:17316882

  18. Comparison of mosquito control programs in seven urban sites in Africa, the Middle East, and the Americas.

    Science.gov (United States)

    Impoinvil, Daniel E; Ahmad, Sajjad; Troyo, Adriana; Keating, Joseph; Githeko, Andrew K; Mbogo, Charles M; Kibe, Lydiah; Githure, John I; Gad, Adel M; Hassan, Ali N; Orshan, Laor; Warburg, Alon; Calderón-Arguedas, Olger; Sánchez-Loría, Victoria M; Velit-Suarez, Rosanna; Chadee, Dave D; Novak, Robert J; Beier, John C

    2007-10-01

    Mosquito control programs at seven urban sites in Kenya, Egypt, Israel, Costa Rica, and Trinidad are described and compared. Site-specific urban and disease characteristics, organizational diagrams, and strengths, weaknesses, obstacles and threats (SWOT) analysis tools are used to provide a descriptive assessment of each mosquito control program, and provide a comparison of the factors affecting mosquito abatement. The information for SWOT analysis is collected from surveys, focus-group discussions, and personal communication. SWOT analysis identified various issues affecting the efficiency and sustainability of mosquito control operations. The main outcome of our work was the description and comparison of mosquito control operations within the context of each study site's biological, social, political, management, and economic conditions. The issues identified in this study ranged from lack of inter-sector collaboration to operational issues of mosquito control efforts. A lack of sustainable funding for mosquito control was a common problem for most sites. Many unique problems were also identified, which included lack of mosquito surveillance, lack of law enforcement, and negative consequences of human behavior. Identifying common virtues and shortcomings of mosquito control operations is useful in identifying "best practices" for mosquito control operations, thus leading to better control of mosquito biting and mosquito-borne disease transmission.

  19. The Effect of Hints and Model Answers in a Student-Controlled Problem-Solving Program for Secondary Physics Education

    NARCIS (Netherlands)

    Pol, Henk J.; Harskamp, Egbert G.; Suhre, Cor J. M.; Goedhart, Martin J.

    Many students experience difficulties in solving applied physics problems. Most programs that want students to improve problem-solving skills are concerned with the development of content knowledge. Physhint is an example of a student-controlled computer program that supports students in developing

  20. BWR Radiation Assessment and Control Program: assessment and control of BWR radiation fields. Volume 1. Executive summary

    International Nuclear Information System (INIS)

    Anstine, L.D.

    1983-05-01

    This report covers work on the BWR Radiation Assessment and Control (BRAC) Program from 1978 to 1982. The major activities during this report period were assessment of the radiation-level trends in BWRs, evaluation of the effects of forward-pumped heater drains on BWR water quality, installation and operation of a corrosion-product deposition loop in an operating BWR, and analyzation of fuel-deposit samples from two BWRs. Radiation fields were found to be controlled by cobalt-60 and to vary from as low as 50 mr/hr to as high as 800 mr/hr on the recirculation-system piping. Detailed information on BWR corrosion films and system deposits is presented in the report. Additionally, the results of an oxygen-injection experiment and recontamination monitoring studies are provided