ORD BROWNFIELDS RESEARCH

Science.gov (United States)

The exhibit is a 10'x10' skyline truss which will be used to highlight the activities of the U.S.-German Bilateral Working Group in the area of brownfields revitalization. The U.S. product, Sustainable Management Approaches and Revitalization Tools - electronic (SMARTe) will be d...

Brownfield redevelopment as a measure for climate changes mitigation

Directory of Open Access Journals (Sweden)

Cizler Jasna

2013-01-01

Full Text Available This paper explores brownfield renewal as a measure of sustainable land use. The aim was to highlight the brownfield redevelopment as a strategy for mitigation of negative effects of climate changes. Emphasis was put on innovative concepts in brownfield redevelopment, which involve land recycling, application of ecological and sustainable solutions. Main case studies are from Austria. Their analysis and evaluation show which concepts and strategies are used in successful redevelopment projects, and which strategies give the best results. This shows that brownfield renewal can have positive effects on regulation and mitigation of climate changes. Finally, guidelines for climate changes accountable and redevelopment will be derived. Research methodology is qualitative and combined, comprising of data analysis, case studies (field work, interviews with relevant actors, analysis of case studies and evaluation according to previously defined criteria, synthesis of results and generalisation and interpretation of results.

National brownfield redevelopment strategy: Executive summary

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-02-01

Brownfields refer to contaminated land which lies unused and unproductive. The potential for rejuvenation of such lands exist, which would bring health and economic benefits to local communities, as numerous sites are located in urban areas. The National Round Table on the Environment and the Economy (NRTEE) agreed, upon request from the government of Canada. to develop a redevelopment strategy designed specifically for brownfields. It is estimated that there are some 30,000 brownfield sites in Canada, such as former railway yards, decommissioned refineries, old waterfronts and riverbanks, crumbling warehouses, abandoned gas stations, former dry cleaners and other commercial properties where toxic substances were either used or stored. The rejuvenation of such sites results in economic, social, and environmental benefits through the creation of numerous jobs, millions of dollars in additional property taxes, as well as thousands of new housing units. There are several challenges in cleaning up those sites: lack of access to capital, regulatory liability risk, civil liability risk, limited access to insurance protection, regulatory delays, stigma and risk perception, and lack or awareness among many key public and private sector groups. This document presents the national strategy developed to address those issues. Three strategic directions have been identified for action: (1) applying strategic public investments to address up front costs, (2) establishing an effective public policy regime for environmental liability and risk management, and (3) building capacity for and community awareness of brownfield redevelopment. Recommendations and the rationale were presented under each proposal.

76 FR 2405 - Notice of Proposed Information Collection: Brownfield Economic Development Initiative (BEDI)

Science.gov (United States)

2011-01-13

... Information Collection: Brownfield Economic Development Initiative (BEDI) AGENCY: Office of the Assistant... proposed use: The Brownfield Economic Development Initiative is authorized pursuant to Section 108(q... applicable: HUD 40123, Brownfields Economic Development Application; SF-LLL, Disclosure of Lobbying...

Green Turning Brown - Domain Engineering for Social and Health Services in Finland.

Science.gov (United States)

Suomi, Reima; Nykänen, Pirkko; Vepsäläinen, Tapio; Hiltunen, Riina

2017-01-01

Being able to design information systems to an untouched domain, without the burden of existing information systems, especially legacy systems, is often seen as a dream of most information system professionals. Uncharted domains are anyway scarce, and often such greenfield projects turn into brownfield projects, also to projects where existing structures severely constrain the development of new systems. In this article we discuss the concepts of greenfield and brownfield domain engineering and software development, and reflect their possible messages to the re-engineering of the Finnish health- and social care ecosystem currently under way. In our fieldwork we could identify a lot of need and wish for greenfield domain engineering in the Finnish health and social services delivery. As well we found a lot of brownfield elements inhibiting change. Our proposal for the future is a ecosystem approach, where new and established elements could live together in a self-governed balance.

Brownfield Grant Site Points, Region 9, 2014, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — EPA's Brownfields Program provides direct funding for brownfields assessment, cleanup, revolving loans, and environmental job training. To facilitate the leveraging...

Renewable energy potential on brownfield sites: A case study of Michigan

International Nuclear Information System (INIS)

Adelaja, Soji; Shaw, Judy; Beyea, Wayne; Charles McKeown, J.D.

2010-01-01

Federal priorities are increasingly favoring the replacement of conventional sources of energy with renewable energy. With the potential for a federal Renewable Electricity Standard (RES) legislation, many states are seeking to intensify their renewable energy generation. The demand for wind, solar, geothermal and bio-fuels-based energy is likely to be rapidly expressed on the landscape. However, local zoning and NIMBYism constraints slow down the placement of renewable energy projects. One area where land constraints may be lower is brownfields; whose development is currently constrained by diminished housing, commercial, and industrial property demand. Brownfield sites have the potential for rapid renewable energy deployment if state and national interests in this area materialize. This study investigates the application of renewable energy production on brownfield sites using Michigan as a case study. Wind and solar resource maps of Michigan were overlaid with the brownfield locations based on estimates of brownfield land capacity. The total estimated energy potential available on Michigan's brownfield sites is 4320 megawatts (MW) of plate capacity for wind and 1535for solar, equating to 43% of Michigan's residential electricity consumption (using 30% capacity factor). Estimated economic impacts include over $15 billion in investments and 17,500 in construction and long-term jobs.

Land Use and Land Cover - BROWNFIELD AREAS IN FLORIDA - APRIL 2012

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — This data set contains Brownfield Boundaries. Brownfields are defined by the Florida Department of Environmental Protection (FDEP) as abandoned, idled, or underused...

Reversing urban sprawl : a reclaimability index approach for reviving downtown brownfields.

Science.gov (United States)

2011-03-01

A key step to promoting urban revitalization is the reclamation of abandoned or underutilized contaminated sites, also known as brownfields. : Effective brownfield redevelopment approaches require environmental, socio-economic and urban planning dime...

A challenge of a Brownfield Redevelopment: Identifying Real Estate Features

NARCIS (Netherlands)

Glumac, B.; Smeets, J.J.A.M.; Schaefer, W.F.; Otter, den A.F.H.J.

2009-01-01

One of the biggest challenges in urban areas is the redevelopment of brownfields. Most of the brownfield sites are currently not fully in use or even totally vacant, derelict or contaminated. They are not available for intended use without a drastic intervention. During the decision making process

Soil and brownfield bioremediation.

Science.gov (United States)

Megharaj, Mallavarapu; Naidu, Ravi

2017-09-01

Soil contamination with petroleum hydrocarbons, persistent organic pollutants, halogenated organic chemicals and toxic metal(loid)s is a serious global problem affecting the human and ecological health. Over the past half-century, the technological and industrial advancements have led to the creation of a large number of brownfields, most of these located in the centre of dense cities all over the world. Restoring these sites and regeneration of urban areas in a sustainable way for beneficial uses is a key priority for all industrialized nations. Bioremediation is considered a safe economical, efficient and sustainable technology for restoring the contaminated sites. This brief review presents an overview of bioremediation technologies in the context of sustainability, their applications and limitations in the reclamation of contaminated sites with an emphasis on brownfields. Also, the use of integrated approaches using the combination of chemical oxidation and bioremediation for persistent organic pollutants is discussed. © 2017 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

Brownfields and Land Revitalization Programmatic Information

Data.gov (United States)

U.S. Environmental Protection Agency — This asset contains resources provided by EPA's Brownfields and Land Revitalization program that can be used for the assessment, cleanup, and redevelopment of...

'Greenfields' and 'Brownfields': automotive industrial development in the UK and in Portugal

Directory of Open Access Journals (Sweden)

Mário Vale

1996-12-01

Full Text Available The industrial policy in the UK and in Portugal, as in most EU countries, seeks to attract new investment capacity, to create jobs and to promote the impact of the so-called "demonstration efect" of "greenfield" development strategies pursued in the new plants of inward investors on existing or "brownfield" plants. This industrial policy focus is particularly evident in the automobile industry.This paper compares the industrial policy oriented towards the automobile industry in the UK and in Portugal. Two recent "greenfield" investments are analised: Nissan in the North-East region (UK and Ford/VW in the Setúbal Peninsula (Portugal, as well as three "brownfield" plants: Ford Halewood and GM Vauxhall Ellesmere Port in the North-West region (UK and Renault in Setúbal (Portugal. The first part starts with a discussion of industrial policy in the automobile sector, the role of "greenfield" development strategies and the "demonstration effect" on "brownfield" plants. Then, the limits of new inward investment are pointed out, basically their problems and restrictions. Afterwards, the structural barriers to the "demonstration effect" within "brownfield" plants are outlined and some possabilities for alternative "brownfield" development strategies are presented.

Comparison of informations from the brownfield catalog and the data needed to evaluate real estate

Directory of Open Access Journals (Sweden)

Kramářová Zuzana

2018-01-01

Full Text Available At present, the topic of sustainable development of the area with brownfield revitalization is one of the current topics. The revitalization of each brownfield requires a completely individual approach, but the whole process can be generalized into several successive points: the identification and cataloging of the site, the search for the investor and the new suitable functions for the brownfield, the design phase of the project, the authorization processes for the realization of the project, realization of the project, new use of the site and realistic return on investment. One of the major challenges for revitalization is the search for an investor. This is due to many factors, among which the acquisition cost of the property, which is based on units of measurement, excels. The tool used to encourage potential investors can be, for example, databases - catalogs of existing brownfields. These contain clearly arranged basic information about individual locations. In view of the easier pricing of the brownfield price (its value, it would be advisable to align this information with the necessary valuation data. The paper therefore deals with comparing the information contained in the brownfield databases and the data needed to determine the brownfield price as a real estate.

COMPETITIVE BROWNFIELD REDEVELOPMENT - PROJECT MANAGEMENT AND MARKETING STRATEGIES (CD 2 OF 6)

Science.gov (United States)

The goal of this interactive CD is to inform urban planners and State and Federal Brownfield development personnel of new and innovative project management and marketing strategies related to brownfield activities. To order this CD by email: www.epa.gov/ncepi/ or phone 1-800-490-...

CRITICAL SUCCESS FACTORS FOR BROWN-FIELD CAPITAL AND RENEWAL PROJECTS

Directory of Open Access Journals (Sweden)

J. Warchol

2012-01-01

Full Text Available

ENGLISH ABSTRACT: Manufacturing companies operate in a business environment where incremental growth may be achieved through expansion and renewal of existing plant and facilities. Effective management of the critical success factors of such capital development projects may also provide competitive advantage. These projects tend to be of a brown-field nature, characterised by a significant level of risk arising from the interaction between the project implementation and concurrent operation of the existing physical asset base. So it is vital to understand the factors that influence the success of capital expansion and renewal projects in the brown-field context. Although each project has unique features, there are critical success factors that can be customised for successful outcomes in the brown-field environment. This study identifies five critical success factors applicable to brown-field capital expansion and renewal projects. Managerial focus on the critical factors, and the prospects for successful brown-field projects, are discussed in the paper.

AFRIKAANSE OPSOMMING: Vervaardigers funksioneer in ‘n sakeomgewing waar voortgesette groei bereik word via uitbreiding en hernuwing van bestaande fasiliteite. Die doeltreffende bestuur van kritiese suksesfaktore van sodanige kapitaalprojekte bied geleentheid vir mededingende voordeel. Projekte van hierdie aard neig om geklassifiseer te word as van herontwikkelingsaard, met betekenisvolle gepaardgaande risiko wat voortspruit uit die interaksie tussen projekimplementering en gelyktydige bedryf van bestaande fisiese bates. Derhalwe is dit belangrik om in die konteks van herontwikkeling aandag te gee aan die kritiese faktore wat ‘n rol speel in die bereiking van sukses. Die navorsing identifiseer vyf kritiese suksesfaktore van belang vir uitbreidings- en vernuwingsprojekte.

Influence of Brownfield Conversion on Evaluating Real Estate and Implemeting the Possibilites of Urban Brownfields in Lithuanian Cities

Directory of Open Access Journals (Sweden)

Vytautas Bielinskas

2015-05-01

Full Text Available The article deals with the problems of brownfield in Lithuania. The paper overviews Lithuanian and foreign experience of integrating the introduced areas into the urban framework based on social, economic, ecological and cultural contextuality. The main problem, on Lithuanian scale, is the absence of an official definition of urban brownfield. The legal framework in Lithuania does not contain any provisions to be processed. The article is aimed at identifying potential threats to the areas in respect of criteria for urban brownfields, and, according to this review, at revealing possible uses of this land. One of the most effective ways of urban sustainable development is the conversion of former military, industrial and other land accepted as the legacy of the Soviet regime. The authors have established a causal relationship resulting in the emergence of the urban areas of wilderness and developed guidance on using them. The authors have analysed and evaluated the existing real estate developers and current trends towards opportunities for private and public partnership (PPP in Lithuania. Although PPP is widespread in most of European countries, it is a rare phenomenon in Lithuania, and has no deep-rooted tradition of this kind of investment in urban infrastructure; however, evaluation is one of the most potential ways to revitalize abandoned urban territories. Based on practices of foreign countries, the authors have identified PPP as a priority.

Bending Priorities: a Study in Policy Framing. State of Michigan’s Brownfield Initiative

Directory of Open Access Journals (Sweden)

Richard HULA

2009-10-01

Full Text Available This paper explores the political process bywhich the state of Michigan successfully crafted andimplemented such a brownfield initiative. Althoughthe primary focus here is on the experience of asingle state, the lessons to be learned from thiscase have national and international implicationsbecause Michigan is a leader in brownfieldprograms. The paper begins with a review of thegeneral policy context in which state brownfieldpolicy is made. Particular attention is given tothe widespread dissatisfaction of a variety ofstakeholders with long dominant federal programsin the area of environmental cleanups. The secondsection outlines a number of fundamental legislativeand administrative changes that have beenimplemented in Michigan environmental policyover the past decade. Section three reviews thebroad literature on issue framing and considershow it might help identify the specific mechanismsby which the innovative brownfield program wasadopted. The final section provides an informal testof elements of the issue-framing model by exploringin some detail the convergence of public opinionwith key elements of the innovative policy, andwhether there was any significant shift in publicopinion over time.

An Information System for Brownfield Regeneration: providing customised information according to stakeholders' characteristics and needs.

Science.gov (United States)

Rizzo, Erika; Pizzol, Lisa; Zabeo, Alex; Giubilato, Elisa; Critto, Andrea; Cosmo, Luca; Marcomini, Antonio

2018-07-01

In the EU brownfield presence is still considered a widespread problem. Even though, in the last decades, many research projects and initiatives developed a wealth of methods, guidelines, tools and technologies aimed at supporting brownfield regeneration. However, this variety of products had and still has a limited practical impact on brownfield revitalisation success, because they are not used in their entire potential due to their scarce visibility. Also, another problem that stakeholders face is finding customised information. To overcome this non-visibility and not-sufficient customisation of information, the Information System for Brownfield Regeneration (ISBR) has been developed, based on Artificial Neural Networks, which allows understanding stakeholders' information needs by providing tailored information. The ISBR has been tested by stakeholders from the EU project TIMBRE case studies, located in the Czech Republic, Germany, Poland and Romania. Data gained during tests allowed to understand stakeholders' information needs. Overall, stakeholders showed to be concerned first on remediation aspects, then on benchmarking information, which are valuable to improve practices in the complex field of brownfield regeneration, and then on the relatively new issue of sustainability applied to brownfield regeneration and remediation. Mature markets confirmed their interest for remediation-related aspects, highlighting the central role that risk assessment plays in the process. Emerging markets showed to seek information and tools for strategic and planning issues, like brownfield inventories and georeferenced data sets. Results led to conclude that a new improved platform, combining the ISBR functionalities with geo-referenced ones, would be useful and could represent a further research application. Copyright © 2018 Elsevier Ltd. All rights reserved.

Turning a hazardous waste lagoon into reclaimed land for wildlife management: A case study

Energy Technology Data Exchange (ETDEWEB)

Leong, A.K. [Woodward-Clyde International, Kuala Lumpur (Malaysia)

1996-12-31

Brownfields are turning back to green. This paper presents a case study of a former dump site for hazardous waste that has been remediated and will be developed into an enhanced wildlife management habitat. This successful remediation case combined various investigations, remedial designs, risk assessments, ecological studies, and engineering practices. 3 refs., 1 fig., 1 tab.

Screening of groundwater remedial alternatives for brownfield sites: a comprehensive method integrated MCDA with numerical simulation.

Science.gov (United States)

Li, Wei; Zhang, Min; Wang, Mingyu; Han, Zhantao; Liu, Jiankai; Chen, Zhezhou; Liu, Bo; Yan, Yan; Liu, Zhu

2018-06-01

Brownfield sites pollution and remediation is an urgent environmental issue worldwide. The screening and assessment of remedial alternatives is especially complex owing to its multiple criteria that involves technique, economy, and policy. To help the decision-makers selecting the remedial alternatives efficiently, the criteria framework conducted by the U.S. EPA is improved and a comprehensive method that integrates multiple criteria decision analysis (MCDA) with numerical simulation is conducted in this paper. The criteria framework is modified and classified into three categories: qualitative, semi-quantitative, and quantitative criteria, MCDA method, AHP-PROMETHEE (analytical hierarchy process-preference ranking organization method for enrichment evaluation) is used to determine the priority ranking of the remedial alternatives and the solute transport simulation is conducted to assess the remedial efficiency. A case study was present to demonstrate the screening method in a brownfield site in Cangzhou, northern China. The results show that the systematic method provides a reliable way to quantify the priority of the remedial alternatives.

The Chicago Center for Green Technology: life-cycle assessment of a brownfield redevelopment project

International Nuclear Information System (INIS)

Brecheisen, Thomas; Theis, Thomas

2013-01-01

The sustainable development of brownfields reflects a fundamental, yet logical, shift in thinking and policymaking regarding pollution prevention. Life-cycle assessment (LCA) is a tool that can be used to assist in determining the conformity of brownfield development projects to the sustainability paradigm. LCA was applied to the process of a real brownfield redevelopment project, now known as the Chicago Center for Green Technology, to determine the cumulative energy required to complete the following redevelopment stages: (1) brownfield assessment and remediation, (2) building rehabilitation and site development and (3) ten years of operation. The results of the LCA have shown that operational energy is the dominant life-cycle stage after ten years of operation. The preservation and rehabilitation of the existing building, the installation of renewable energy systems (geothermal and photovoltaic) on-site and the use of more sustainable building products resulted in 72 terajoules (TJ) of avoided energy impacts, which would provide 14 years of operational energy for the site. (letter)

Communication and information strategy for Brownfield redevelopment

NARCIS (Netherlands)

Otter, den A.F.H.J.; Han, Q.; Kleis, N.R.; Ramli, M.; Hassan, A.; Razak, A.A.

2009-01-01

Stakeholders communication and information management are key elements for successful Brownfield redevelopment. Still, the effects of these matters often are underestimated by private and public developers. Conflicting opinions between these stakeholders put a serious threat on the smooth process in

77 FR 5044 - Announcement of Funding Awards for the Brownfields Economic Development Initiative (BEDI) Program...

Science.gov (United States)

2012-02-01

... Awards for the Brownfields Economic Development Initiative (BEDI) Program for Fiscal Year 2010 AGENCY...) for the Brownfield Economic Development Initiative (BEDI) program. This announcement contains the... CONTACT: David Kaminsky, Office of Economic Development Grants Management Division, Office of Community...

77 FR 5043 - Announcement of Funding Awards for the Brownfields Economic Development Initiative (BEDI) Program...

Science.gov (United States)

2012-02-01

... Awards for the Brownfields Economic Development Initiative (BEDI) Program for Fiscal Year 2009 AGENCY...) for the Brownfield Economic Development Initiative (BEDI) program. This announcement contains the... CONTACT: David Kaminsky, Office of Economic Development Grants Management Division, Office of Community...

76 FR 17662 - Notice of Submission of Proposed Information Collection to OMB Brownfields Economic Development...

Science.gov (United States)

2011-03-30

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5480-N-29] Notice of Submission of Proposed Information Collection to OMB Brownfields Economic Development Initiative (BEDI) Grant Application...--State Certifications Related to Nonentitlement; HUD--40123--Brownfields Economic Development Application...

Directory of Technology Support Services to Brownfields Localities

Science.gov (United States)

This directory provides information about EPA offices, nongovernment organizations funded by EPA, and other federal agencies, that may be able to provide expertise to assist in the selection of technologies to characterize and clean up brownfields.

Brownfield Sites, Region 9, 2012, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Brownfields are real property, the expansion, redevelopment, or reuse of which may be complicated by the presence or potential presence of a hazardous substance,...

Denitrification and potential nitrous oxide and carbon dioxide production in brownfield wetland soils.

Science.gov (United States)

Palta, Monica M; Ehrenfeld, Joan G; Groffman, Peter M

2013-09-01

Brownfields, previously developed sites that are derelict, vacant, or underused, are ubiquitous in urban areas. Wetlands on brownfields often retain rain and stormwater longer than the surrounding landscape because they are low-lying; this increases the possibility for these areas to process waterborne contaminants from the urban environment. In the northeastern United States, atmospheric deposition of nitrate (NO) is high. Denitrification, a microbial process common in wetlands, is a means of removing excess NO. Nitrogen gas is the desired end product of denitrification, but incomplete denitrification results in the production of NO, a greenhouse gas. The goal of this study was to investigate the potential of brownfield wetlands to serve as sinks for inorganic nitrogen and sources of greenhouse gases. We examined limitations to denitrification and NO production in brownfield wetland soils in New Jersey. Soil C:N ratios were high (18-40) and intact core denitrification (-0.78 to 11.6 μg NO-N kg dry soil d) and N mineralization (0.11-2.97 mg N kg dry soil d) were low for all sites. However, soil NO increased during dry periods. Nitrate additions to soil slurries increased denitrification rates, whereas labile C additions did not, indicating that soil denitrifiers were nitrogen limited. Incubations indicated that the end product of denitrification was primarily NO and not N. These results indicate that brownfield wetlands can develop significant denitrification capacity, potentially causing NO limitation. They might be significant sinks for atmospheric NO but may also become a significant source of NO if NO deposition were to increase. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Measuring site-level success in brownfield redevelopments: a focus on sustainability and green building.

Science.gov (United States)

Wedding, G Christopher; Crawford-Brown, Douglas

2007-10-01

This research has met the following four objectives within the broader research topic of characterizing and quantifying success in brownfield revitalization: (1) to define 40 total indicators that define and determine the success of brownfield redevelopments in four categories: environment-health, finance, livability, and social-economic; (2) to use these indicators to develop a partially automated tool that stakeholders in brownfield redevelopment may use to more easily assess and communicate success (or failures) in these projects; (3) to integrate "green" building as an important aspect of successful brownfield redevelopments; and (4) to develop this tool within the framework of a specific multi-attribute decision method (MADM), the analytical hierarchical process (AHP). Future research should include the operationalization and application of this tool to specific sites. Currently, no such indicator framework or automated tool is known to exist or be in use. Indicators were chosen because of their ability to reduce data into comprehensible measurements and to systematically measure success in a standardized fashion. Appropriate indicators were selected based on (1) interviews with prominent private developers and national leaders in brownfield redevelopment, (2) a review of the relevant literature, (3) objective hierarchies created in this project, and (4) the ability for each indicator to serve goals in more than one of the four categories described above. These were combined to form the Sustainable Brownfields Redevelopment (SBR) Tool. A survey was conducted to serve as a preliminary assessment and proposed methodology for judging the validity of the SBR Tool. Professionals in the academic, private, and public sector were asked to provide an evaluation of the management tool and a weighting of the relative importance of each indicator and each of the four categories listed previously. Experts rated the tool at 7.68 out of 10 suggesting that this framework will

Brownfields Technology Primer: Selecting and Using Phytoremediation for Site Cleanup

Science.gov (United States)

This primer explains the phytoremediation process, discusses the potential advantages and considerations in selecting phytoremediation to clean up brownfields sites, and provides information on additional resources about phytoremediation.

Cleanups In My Community (CIMC) - Brownfields Grant Jurisdictions, National Layer

Data.gov (United States)

U.S. Environmental Protection Agency — This data layer provides access to Brownfields Grant Jurisdictions as part of the CIMC web service. The data represent polygonal boundaries that show different types...

Woody biomass phytoremediation of contaminated brownfield land

Energy Technology Data Exchange (ETDEWEB)

French, Christopher J. [School of Biological and Earth Sciences, Liverpool John Moores University, Byrom Street, Liverpool L3 3AF (United Kingdom); Dickinson, Nicholas M. [School of Biological and Earth Sciences, Liverpool John Moores University, Byrom Street, Liverpool L3 3AF (United Kingdom)]. E-mail: n.m.dickinson@livjm.ac.uk; Putwain, Philip D. [Ecological Restoration Consultants (ERC), Ness Botanic Gardens, University of Liverpool, Ness, Cheshire CH64 (United Kingdom)

2006-06-15

Economic and environmental regeneration of post-industrial landscapes frequently involves some element of re-afforestation or tree planting. We report field trials that evaluate whether woody biomass production is compatible with managing residual trace element contamination in brownfield soils. Large-scale mapping of contamination showed a heterogenous dispersion of metals and arsenic, and highly localised within-site hotspots. Yields of Salix, Populus and Alnus were economically viable, showing that short-rotation coppice has a potentially valuable role in community forestry. Mass balance modelling demonstrated that phytoextraction potentially could reduce contamination hotspots of more mobile elements (Cd and Zn) within a 25-30-year life cycle of the crops. Cd and Zn in stems and foliage of Salix were 4-13 times higher than EDTA-extractable soil concentrations. Lability of other trace elements (As, Pb, Cu, Ni) was not increased 3 years after planting the coppice; woody biomass may provide an effective reduction of exposure (phytostabilisation) to these less mobile contaminants. - Field trials show short-rotation coppice provides effective risk management and remediation solutions to hotspots of residual metal and As contamination of brownfield land.

Woody biomass phytoremediation of contaminated brownfield land

International Nuclear Information System (INIS)

French, Christopher J.; Dickinson, Nicholas M.; Putwain, Philip D.

2006-01-01

Economic and environmental regeneration of post-industrial landscapes frequently involves some element of re-afforestation or tree planting. We report field trials that evaluate whether woody biomass production is compatible with managing residual trace element contamination in brownfield soils. Large-scale mapping of contamination showed a heterogenous dispersion of metals and arsenic, and highly localised within-site hotspots. Yields of Salix, Populus and Alnus were economically viable, showing that short-rotation coppice has a potentially valuable role in community forestry. Mass balance modelling demonstrated that phytoextraction potentially could reduce contamination hotspots of more mobile elements (Cd and Zn) within a 25-30-year life cycle of the crops. Cd and Zn in stems and foliage of Salix were 4-13 times higher than EDTA-extractable soil concentrations. Lability of other trace elements (As, Pb, Cu, Ni) was not increased 3 years after planting the coppice; woody biomass may provide an effective reduction of exposure (phytostabilisation) to these less mobile contaminants. - Field trials show short-rotation coppice provides effective risk management and remediation solutions to hotspots of residual metal and As contamination of brownfield land

The Path From Passivity Toward Entrepreneurship: Public Sector Actors in Brownfield Regeneration Processes in Central Eastern Europe

Czech Academy of Sciences Publication Activity Database

Alexandrescu, F.; Martinát, Stanislav; Klusáček, Petr; Bartke, S.

2014-01-01

Roč. 27, č. 2 (2014), s. 181-201 ISSN 1086-0266 Institutional support: RVO:68145535 Keywords : brownfield regeneration * institutional entrepreneurs * Tailored Improvement of Brownfield Regeneration in Europe Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 1.386, year: 2013 http://oae.sagepub.com/content/27/2/181.full.pdf+html

Conflicts and cooperation in Brownfield redevelopment projects : application of conjoint analysis and game theory to model strategic decision making

NARCIS (Netherlands)

Blokhuis, E.G.J.; Snijders, C.C.P.; Han, Q.; Schaefer, W.F.

2012-01-01

Redevelopment of brownfields is placed high on the political agendas in many countries. However, brownfield redevelopment projects are often problematic, and the frequent occurrence of conflicts between involved and interdependent stakeholders is directly related to this. To date, there is no

Transport Infrastructure in the Process of Cataloguing Brownfields

Science.gov (United States)

Kramářová, Zuzana

2017-10-01

To begin with, the identification and follow-up revitalisation of brownfields raises a burning issue in territorial planning as well as in construction engineering. This phenomenon occurs not only in the Czech Republic and Europe, but also world-wide experts conduct its careful investigation. These issues may be divided into several areas. First, it is identifying and cataloguing single territorial localities; next, it means a complex process of locality revitalisation. As a matter of fact, legislative framework represents a separate area, which is actually highly specific in individual countries in accordance with the existing law, norms and regulations (it concerns mainly territorial planning and territory segmentation into appropriate administrative units). Legislative base of the Czech Republic was analysed in an article at WMCAUS in 2016. The solution of individual identification and following cataloguing of brownfields is worked out by Form of Regional Studies within the Legislation of the Czech Republic. Due to huge the scale of issues to be tackled, their content is only loosely defined in regard to Building Act and its implementing regulations, e.g. examining the layout of future construction in the area, locating architecturally or otherwise interesting objects, transport or technical infrastructure management, tourism, socially excluded localities etc. Legislative base does not exist, there is no common method for identifying and cataloguing brownfields. Therefore, individual catalogue lists are subject to customer’s requirements. All the same, the relevant information which the database contains may be always examined. One of them is part about transport infrastructure. The information may be divided into three subareas - information on transport accessibility of the locality, information on the actual infrastructure in the locality and information on the transport accessibility of human resources.

A GIS connection between brownfield sites, transportation and economic development.

Science.gov (United States)

2011-08-01

"This report outlines the design and development of a web-based data distribution system for brownfield site redevelopment in Toledo-Lucas County, Ohio. The system is designed to advance smart growth initiatives by creating the link between transport...

Economic efficiency of brownfield regeneration: study of South Moravian projects

Directory of Open Access Journals (Sweden)

Jana Korytárová

2017-06-01

Full Text Available The objective of brownfield regeneration is to increase the attractiveness and value of individual sites to a level where they can compete directly with the construction of a greenfi eld project. The aim of this paper is to examine the economic efficiency of brownfield regeneration. By using CBA outputs, the contribution of socio-economic efficiency to the total efficiency of individual projects based on EBCR was investigated on the basis of a sample of 14 projects located in the South Moravian Region. Furthermore, the expected value of EBCR was simulated by using the Monte Carlo method. The results reveal that socio-economic efficiency contributes significantly to the overall efficiency of these projects and therefore cannot be neglected during their evaluation. At the end of the paper, future research directions in this area are outlined.

Environmental Impact Assessment, Brownfield Areas. Brownfields are defined by the Florida DEP as abandoned, idled, or underused industrial and commercial facilities where expansion or redevelopment is complicated by real or perceived environmental contamination., Published in 2001, 1:24000 (1in=2000ft) scale, Florida Department of Environmental Protection (FDEP).

Data.gov (United States)

NSGIC State | GIS Inventory — Environmental Impact Assessment dataset current as of 2001. Brownfield Areas. Brownfields are defined by the Florida DEP as abandoned, idled, or underused industrial...

Brownfields and Urban Agriculture: Interim Guidelines for Safe Gardening Practices

Science.gov (United States)

This document is a condensation of the input of experts from the government, the nonprofit sector, and academia who gathered to outline the range of issues which need to be addressed in order to safely grow food on former brownfield sites.

Brownfields Assessing Contractor Capabilities for Streamlined Site Investigations -- Additional Information Regarding All Appropriate Inquiries and Hiring an Environmental Professional (November 2006)

Science.gov (United States)

Guidance for Brownfields grantees and other decision makers to assess the capabilities of contractors and consultants to determine their qualifications to provide streamlined and innovative strategies for the assessment and cleanup of brownfields.

Earth Science Instruction Using Brownfields in the Virtual Classroom

Science.gov (United States)

Bower, P. M.; Liddicoat, J. C.

2008-05-01

Geophysical methods of defining contaminant plumes from brownfields are taught in lecture and laboratory using Brownfield Action (BA) that is a network-based, interactive, digital space and simulation in which undergraduate students explore and solve problems in geohydrology. In the U.S., BA is recognized nationally as an innovative curriculum and simulation that has been developed by Peter Bower at Barnard College in collaboration with Columbia University's Center for New Media Teaching and Learning. Brownfields are former industrial sites that have potential as recreational, residential, and commercial real estate sites when reclaimed. As part of assessing the value of such a site, an environmental site assessment (ESA) is required to determine the nature and extent of any contamination. To reach that objective, BA contains a narrative element that is embedded and to be discovered in simulation; it is a story of groundwater contamination complete with underground contaminant plumes in a fictitious town with buildings, roads, wells, water tower, homes, and businesses as well as a municipal government with relevant historical documents. Student companies work collaboratively in teams of two, sign a contract with a development corporation to conduct a Phase One ESA, receive a realistic budget, and compete with other teams to fulfill the contract while maximizing profit. To reach a valid conclusion in the form of a professional-level ESA and 3-D maps of the physical site, teams must construct a detailed narrative from diverse forms of information, including socio-historical and a scientific dataset comprised of over 2,000,000 data points. BA forces the students to act on their perceptions of the interlocking realms of knowledge, theory and practical experience, providing an opportunity for them to gain valuable practice at tackling the complexity and ambiguity of a large-scale, interdisciplinary investigation of groundwater contamination and environmental forensics.

Allocating risk capital for a brownfields redevelopment project under hydrogeological and financial uncertainty.

Science.gov (United States)

Yu, Soonyoung; Unger, Andre J A; Parker, Beth; Kim, Taehee

2012-06-15

In this study, we defined risk capital as the contingency fee or insurance premium that a brownfields redeveloper needs to set aside from the sale of each house in case they need to repurchase it at a later date because the indoor air has been detrimentally affected by subsurface contamination. The likelihood that indoor air concentrations will exceed a regulatory level subject to subsurface heterogeneity and source zone location uncertainty is simulated by a physics-based hydrogeological model using Monte Carlo realizations, yielding the probability of failure. The cost of failure is the future value of the house indexed to the stochastic US National Housing index. The risk capital is essentially the probability of failure times the cost of failure with a surcharge to compensate the developer against hydrogeological and financial uncertainty, with the surcharge acting as safety loading reflecting the developers' level of risk aversion. We review five methodologies taken from the actuarial and financial literature to price the risk capital for a highly stylized brownfield redevelopment project, with each method specifically adapted to accommodate our notion of the probability of failure. The objective of this paper is to develop an actuarially consistent approach for combining the hydrogeological and financial uncertainty into a contingency fee that the brownfields developer should reserve (i.e. the risk capital) in order to hedge their risk exposure during the project. Results indicate that the price of the risk capital is much more sensitive to hydrogeological rather than financial uncertainty. We use the Capital Asset Pricing Model to estimate the risk-adjusted discount rate to depreciate all costs to present value for the brownfield redevelopment project. A key outcome of this work is that the presentation of our risk capital valuation methodology is sufficiently generalized for application to a wide variety of engineering projects. Copyright © 2012 Elsevier

Preliminary study of phytoremediation of brownfield soil contaminated by PAHs

Czech Academy of Sciences Publication Activity Database

Petrová, Šárka; Rezek, Jan; Soudek, Petr; Vaněk, Tomáš

599-600, DEC 1 (2017), s. 572-580 ISSN 0048-9697 Institutional support: RVO:61389030 Keywords : Brownfield * Energy plants * Phytoremediation * Polyaromatic hydrocarbon s Subject RIV: DJ - Water Pollution ; Quality OBOR OECD: Bioremediation, diagnostic biotechnologies (DNA chips and biosensing devices) in environmental management Impact factor: 4.900, year: 2016

Combined strategic and tactical negotiation methodology for resolving complex brownfield conflicts

Directory of Open Access Journals (Sweden)

Keith W. Hipel

2010-08-01

Full Text Available An innovative negotiation methodology for strategic and tactical decision making is proposed for resolving conflicts in brownfield redevelopment. At the strategic level, the Graph Model for Conflict Resolution is systematically employed for determining a potential overall agreement, or set of resolutions, that is politically possible given the competing interests of the decision makers involved in a brownfield redevelopment project. At the tactical level, a possible strategic solution can be studied in depth using utility theory to determine trade-offs or concessions needed to reach a mutually acceptable detailed solution. Also, the proposed negotiation methodology can take into account the attitudes of negotiators and investigates the impact of the negotiators' attitudes on the outcome of negotiations at both levels of negotiation. The design of a negotiation decision support system is put forward to allow the proposed negotiation methodology to be conveniently applied to actual disputes.

A geochemical study of toxic metal translocation in an urban brownfield wetland

International Nuclear Information System (INIS)

Qian Yu; Gallagher, Frank J.; Feng Huan; Wu Meiyin

2012-01-01

Rhizosphere soil and dominant plant samples were collected at a brownfield site in New Jersey, USA, during summer 2005 to evaluate plant metal uptake from the contaminated soils. Metal concentrations varied from 4.25 to 978 μg g −1 for As, 9.68–209 μg g −1 for Cr, 23.9–1870 μg g −1 for Cu, and 24.8–6502 μg g −1 for Zn. A wide range of metal uptake efficiencies in the roots, stems and leaves was found in this study. Data showed that (1) Betula populifolia has high Zn, Cu and As accumulations in the root, and high concentrations of Cu and Zn in the stem and the leaf; (2) Rhus copallinum has high accumulation of Zn and Cr in the leaf and Cu in the stem; (3) Polygonum cuspidatum has high accumulations of Cu and As in the root; and (4) Artemisia vulgaris shows high Cu accumulation in the leaf and the stem. - Highlights: ► Rhizosphere soil and dominant plant samples were studied at a brownfield. ► Plant roots showed exceptional capacity of heavy metal accumulation. ► Metal uptake efficiency decrease with the increases of pH and organic matter. ► Variations in metal uptake efficiency in the root, stem and leave were found. - Metal uptake by brownfield wetland plants in the New York/New Jersey metropolitan area.

Phytoremediation of Chicago's brownfields: consideration of ecological approaches and social issues.

Science.gov (United States)

Lynne M. Westphal; J. G. Isebrands

2001-01-01

Phytoremediation is an emerging technology for remediating brownfields, landfills, and other contaminated sites. Many laboratory and field tests have demonstrated that trees and other vegetation can absorb, transform, or contain a variety of contaminants, including soft and heavy metals and volatile organics through hydraulic control, absorption, and mycorrhizal...

Assessing Success Factors of Brownfields Regeneration: International and Inter-stakeholder Perspective

Czech Academy of Sciences Publication Activity Database

Frantál, Bohumil; Kunc, Josef; Klusáček, Petr; Martinát, Stanislav

44E, 44E (2015), s. 91-107 ISSN 2247-8310 R&D Projects: GA TA ČR(CZ) TD020259 Institutional support: RVO:68145535 Keywords : brownfields * success factors * stakeholders perception Subject RIV: DE - Earth Magnetism, Geodesy, Geography http://rtsa.ro/tras/index.php/tras/article/view/427/417

Altered vegetative assemblage trajectories within an urban brownfield

Energy Technology Data Exchange (ETDEWEB)

Gallagher, Frank J., E-mail: Gallagher@sebs.rutgers.edu [Urban Forestry Program, Department of Ecology, Evolution and Natural Resources, Rutgers, State University, 14 College Farm Road, New Brunswick, NJ 08901-8551 (United States); Pechmann, Ildiko; Holzapfel, Claus [Department of Biological Sciences, Rutgers, State University, 195 University Avenue, Newark, NJ 07102 (United States); Grabosky, Jason [Urban Forestry Program, Department of Ecology, Evolution and Natural Resources, Rutgers, State University, 14 College Farm Road, New Brunswick, NJ 08901-8551 (United States)

2011-05-15

Recognizing the growing importance of both structure (maintenance of biodiversity) and function (fostering natural cycles) of urban ecologies, we examine coarse scale (herbaceous, shrub and forest) beta guild trajectory in an urban brownfield. The distribution of the pioneer forest assemblage dominated by Betula populifolia Marsh. and Populus spp. could be correlated positively with total soil metal load (arsenic, cadmium, chromium, copper, lead, zinc, lead and vanadium),whereas herbaceous and shrub guilds were negatively correlated. Distinct assemblage development trajectories above and below a critical soil metal threshold are demonstrated. In addition, we postulate that the translocation of metals into the plant tissue of several dominant species may provide a positive feedback loop, maintaining relatively high concentrations of metals in the litter and soil. Therefore assembly theory, which allows for the development of alternate stable states, may provide a better model for the establishment of restoration objectives on degraded urban sites. - Highlights: > Forest distribution and total soil metal load yield strong positive correlations. > Shrub and herbaceous guild distribution and TML are negative and weaker. > Below a critical TML threshold transition between guilds exhibit a standard trajectory. > Above the critical TML threshold the shrub guild is virtually absent. > Metal cycling has the potential to lead to an alternative steady state. - High concentrationsof soil metals, impact the trajectory of vegetative assemblages in an urban brownfield leading to the speculation of an alternate stable state.

76 FR 2905 - FY2011 Supplemental Funding for Brownfields Revolving Loan Fund (RLF) Grantees

Science.gov (United States)

2011-01-18

...- 3364, Fax (415) 972- 3364. EPA Region 10, Susan Morales, AK, ID, OR, WA... 1200 Sixth Avenue, Morales.... Dated: January 10, 2011. David R. Lloyd, Director, Office of Brownfields and Land Revitalization, Office...

75 FR 10793 - FY2010 Supplemental Funding for Brownfields Revolving Loan Fund (RLF) Grantees

Science.gov (United States)

2010-03-09

... (213) 244- 1850. EPA Region 10, Susan Morales, AK, ID, OR, WA 1200 Sixth Avenue, Suite Morales.Susan...: March 2, 2010. David R. Lloyd, Director, Office of Brownfields and Land Revitalization, Office of Solid...

2016 Revolving Loan Fund Supplemental Awards for Brownfields and Land Revitalization in New England

Science.gov (United States)

EPA has announced grants of nearly $2.6 million in RLF supplemental funding for communities in Connecticut, Maine, Massachusetts, Rhode Island and Vermont to carry out cleanup and redevelopment projects at contaminated Brownfields properties.

Altered vegetative assemblage trajectories within an urban brownfield

International Nuclear Information System (INIS)

Gallagher, Frank J.; Pechmann, Ildiko; Holzapfel, Claus; Grabosky, Jason

2011-01-01

Recognizing the growing importance of both structure (maintenance of biodiversity) and function (fostering natural cycles) of urban ecologies, we examine coarse scale (herbaceous, shrub and forest) beta guild trajectory in an urban brownfield. The distribution of the pioneer forest assemblage dominated by Betula populifolia Marsh. and Populus spp. could be correlated positively with total soil metal load (arsenic, cadmium, chromium, copper, lead, zinc, lead and vanadium),whereas herbaceous and shrub guilds were negatively correlated. Distinct assemblage development trajectories above and below a critical soil metal threshold are demonstrated. In addition, we postulate that the translocation of metals into the plant tissue of several dominant species may provide a positive feedback loop, maintaining relatively high concentrations of metals in the litter and soil. Therefore assembly theory, which allows for the development of alternate stable states, may provide a better model for the establishment of restoration objectives on degraded urban sites. - Highlights: → Forest distribution and total soil metal load yield strong positive correlations. → Shrub and herbaceous guild distribution and TML are negative and weaker. → Below a critical TML threshold transition between guilds exhibit a standard trajectory. → Above the critical TML threshold the shrub guild is virtually absent. → Metal cycling has the potential to lead to an alternative steady state. - High concentrationsof soil metals, impact the trajectory of vegetative assemblages in an urban brownfield leading to the speculation of an alternate stable state.

Local Government Planning Tool to Calculate Institutional and Engineering Control Costs for Brownfield Properties

Science.gov (United States)

This cost calculator is designed as a guide for municipal or local governments to assist in calculating their expected costs of implementing and conducting long-term stewardship of institutional controls and engineering controls at brownfield properties.

Assessing the effect of publicly assisted brownfield redevelopment on surrounding property values

Science.gov (United States)

Christopher A. De Sousa; Changson Wu; Lynne M. Westphal

2009-01-01

This study measures and compares the impact of publicly assisted brownfield redevelopment on nearby residential property values in Milwaukee and Minneapolis. It also examines the influence of land use, neighborhood characteristics, and other redevelopment factors on this impact. The research approach incorporates a hedonic method to quantify nearby property value...

U.S. - GERMAN BILATERAL WORKING GROUP WORKSHOP ON: ECONOMIC TOOLS FOR SUSTAINABLE BROWNFIELDS REDEVELOPMENT

Science.gov (United States)

This CD-ROM contains information from a two-day workshop discussing innovative brownfields financing and economic strategies in the United States and Germany. A special emphasis was given to the identification of advantages and disadvantages of different financial tools, economi...

2015 Revolving Loan Fund Supplemental Awards for Brownfields and Land Revitalization in New England

Science.gov (United States)

Communities in CT, ME, MA and VT will receive additional grants of $4.3 million in revolving loan fund (RLF) supplemental funding to carry out cleanup and redevelopment projects at contaminated Brownfields properties. See a list of recipients for 2015.

Remediating MGP brownfields

International Nuclear Information System (INIS)

Larsen, B.R.

1997-01-01

Before natural gas pipelines became widespread in this country, gas fuel was produced locally in more than 5,000 manufactured gas plants (MGPs). The toxic wastes from these processes often were disposed onsite and have since seeped into the surrounding soil and groundwater. Although the MGPs--commonly called gas plants, gas-works or town gas plants--have closed and most have been demolished, they have left a legacy of environmental contamination. At many MGP sites, underground storage tanks were constructed of wood or brick, with process piping and equipment which frequently leaked. Waste materials often were disposed onsite. Releases of coal tars, oils and condensates produced within the plants contributed to a wide range of contamination from polycyclic aromatic hydrocarbons, phenols, benzene and cyanide. Remediation of selected MGP sites has been sporadic. Unless the site has been identified as a Comprehensive Environmental Response, Compensation and Liability Information System (CERCLIS) Superfund site, the regulatory initiative to remediate often remains with the state in which the MGP is located. A number of factors are working to change that picture and to create a renewed interest in MGP site remediation. The recent Brownfield Initiative by the US Environmental Protection Agency (EPA) is such an example

Brownfields Recover Your Resources - Reduce, Reuse, and Recycle Construction and Demolition Materials at Land Revitalization Projects

Science.gov (United States)

This document provides background information on how the sustainable reuse of brownfield properties includes efforts to reduce the environmental impact by reusing and recycling materials generated during building construction, demolition, or renovation.

Carbonation of stainless steel slag in the context of in situ Brownfield remediation

NARCIS (Netherlands)

Capobianco, O.; Costa, G.; Thuy, L.; Magliocco, E.; Hartog, Niels; Baciocchi, R.

The main aim of this work was to assess the potential of in situ carbonation as a treatment to modify the properties of alkaline materials such as industrial soil in terms of leaching behaviour and mineralogy and to store the CO2 generated by specific treatments applied in the context of Brownfield

US EPA Region 4 Brownfields

Science.gov (United States)

To improve public health and the environment, the United States Environmental Protection Agency (USEPA) collects information about facilities, sites, or places subject to environmental regulation or of environmental interest. Through the Geospatial Data Download Service, the public is now able to download the EPA Geodata shapefile containing facility and site information from EPA's national program systems. The file is Internet accessible from the Envirofacts Web site (https://www3.epa.gov/enviro/). The data may be used with geospatial mapping applications. (Note: The shapefile omits facilities without latitude/longitude coordinates.) The EPA Geospatial Data contains the name, location (latitude/longitude), and EPA program information about specific facilities and sites. In addition, the file contains a Uniform Resource Locator (URL), which allows mapping applications to present an option to users to access additional EPA data resources on a specific facility or site. This dataset shows Brownfields listed in the 2012 Facility Registry System.

Brownfield regeneration from the perspective of residents: Place circumstances versus character of respondents

Czech Academy of Sciences Publication Activity Database

Martinát, S.; Navrátil, J.; Pícha, K.; Turečková, K.; Klusáček, Petr

2017-01-01

Roč. 9, č. 2 (2017), s. 71-92 ISSN 1821-2506 R&D Projects: GA ČR(CZ) GA17-26934S Institutional support: RVO:68145535 Keywords : brownfields * regeneration * perception Subject RIV: DE - Earth Magnetism, Geodesy, Geography OBOR OECD: Environmental sciences (social aspects) http://www.deturope.eu/index.php?navi=101&vol=26

Instructing high school students in forensic environmental science using Brownfield Action

Science.gov (United States)

Bower, Peter; Liddicoat, Joseph; Patterson, Angelica; Kelsey, Ryan; Cox, Alice; Tynes, Nicholas

2010-05-01

Barnard College and Columbia University's Center for New Media Teaching and Learning's Brownfield Action is a digital web-based, interactive simulation that combines lecture, laboratory exercises, and individual and collaborative out-of-classroom assignments. The objective of the instruction is to locate and define a subsurface plume of gasoline whose point source is a leaking underground storage tank (LUST) at a gas station. In the fall of 2009, fifteen pre-college high school students from the five boroughs of New York City used Brownfield Action in a 12-week after-school enrichment program at Barnard to investigate the gasoline plume using a variety of geophysical methods - excavation, ground penetrating radar, magnetic metal detection, soil gas, and drilling. The investigation resulted in individual Phase One Site Assessment Reports about the LUST. As coordinators and instructors of the program, we will share our experience teaching the students and the advantages and challenges of using a digital simulation as an instructional centerpiece. Such instruction is intended to include civic engagement and responsibility as part of science education and to create a curriculum that, instead of relying on fragmented and abstract instruction, provides students with a realistic, inquiry-based, and interdisciplinary construction of knowledge.

Exploring spatial patterns of urban brownfields regeneration: The case of Brno, Czech Republic

Czech Academy of Sciences Publication Activity Database

Frantál, Bohumil; Greer-Wootten, B.; Klusáček, Petr; Krejčí, Tomáš; Kunc, Josef; Martinát, Stanislav

2015-01-01

Roč. 44, č. 1 (2015), s. 9-18 ISSN 0264-2751 R&D Projects: GA TA ČR(CZ) TD020259 Institutional support: RVO:68145535 Keywords : brownfields * urban renewal * spatial patterns Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 2.051, year: 2015 http://dx.doi.org/10.1016/j.cities.2014.12.007

Online Higher Education Instruction to Foster Critical Thinking When Assessing Environmental Issues - the Brownfield Action Model

Science.gov (United States)

Bower, Peter; Liddicoat, Joseph; Dittrick, Diane; Maenza-Gmelch, Terryanne; Kelsey, Ryan

2013-04-01

According to the Environmental Protection Agency, there are presently over half a million brownfields in the United States, but this number only includes sites for which an Environmental Site Assessment has been conducted. The actual number of brownfields is certainly into the millions and constitutes one of the major environmental issues confronting all communities today. Taught in part online for more than a decade in environmental science courses at over a dozen colleges, universities, and high schools in the United States, Brownfield Action (BA) is an interactive, web-based simulation that combines scientific expertise, constructivist education philosophy, and multimedia to advance the teaching of environmental science (Bower et al., 2011). In the online simulation and classroom, students form geotechnical consulting companies, conduct environmental site assessment investigations, and work collaboratively to solve a problem in environmental forensics. The BA model contains interdisciplinary scientific and social information that are integrated within a digital learning environment that encourages students to construct their knowledge as they learn by doing. As such, the approach improves the depth and coherence of students understanding of the course material. Like real-world environmental consultants, students are required to develop and apply expertise from a wide range of fields, including environmental science and engineering as well as journalism, medicine, public health, law, civics, economics, and business management. The overall objective is for students to gain an unprecedented appreciation of the complexity, ambiguity, and risk involved in any environmental issue or crisis.

Negotiation issues in forming public–private partnerships for brownfield redevelopment: Applying a game theoretical experiment

NARCIS (Netherlands)

Glumac, B.; Han, Q.; Schaefer, W.; Krabben, E. van der

2015-01-01

The redevelopment of a brownfield can provide a range of societal, environmental but also economic benefits for a number of entities. In the Netherlands (and elsewhere), public–private partnerships are common practice for such projects, because of two main reasons. First, limitations to public

The influence of compost addition on the water repellency of brownfield soils

Science.gov (United States)

Whelan, Amii; Kechavarzi, Cedric; Sakrabani, Ruben; Coulon, Frederic; Simmons, Robert; Wu, Guozhong

2010-05-01

Compost application to brownfield sites, which can facilitate the stabilisation and remediation of contaminants whilst providing adequate conditions for plant growth, is seen as an opportunity to divert biodegradable wastes from landfill and put degraded land back into productive use. However, although compost application is thought to improve soil hydraulic functioning, there is a lack of information on the impact of large amounts of compost on soil water repellency. Water repellency in soils is attributed to the accumulation of hydrophobic organic compounds released as root exudates, fungal and microbial by-products and decomposition of organic matter. It has also been shown that brownfield soils contaminated with petroleum-derived organic contaminants can exhibit strong water repellency, preventing the rapid infiltration of water and leading potentially to surface run off and erosion of contaminated soil. However, hydrophobic organic contaminants are known to become sequestrated by partitioning into organic matter or diffusing into nano- and micropores, making them less available over time (ageing). The effect of large amounts of organic matter addition through compost application on the water repellency of soils contaminated with petroleum-derived organic contaminants requires further investigation. We characterised the influence of compost addition on water repellency in the laboratory by measuring the Water Drop Penetration Time (WDPT), sorptivity and water repellency index through infiltration experiments on soil samples amended with two composts made with contrasting feedstocks (green waste and predominantly meat waste). The treatments consisted of a sandy loam, a clay loam and a sandy loam contaminated with diesel fuel and aged for 3 years, which were amended with the two composts at a rate equivalent to 750t/ha. In addition core samples collected from a brownfield site, amended with compost at three different rates (250, 500 and 750t/ha) in 2007, were

Hydrogeochemical and stream sdeiment reconnaissance basic data for Brownfield Quadrangle, New Mexico; Texas

International Nuclear Information System (INIS)

1981-01-01

Field and laboratory data are presented for 452 water samples and 351 sediment samples from the Brownfield Quadrangle, New Mexico; Texas. Uranium values have been reported by Los Alamos National Laboratory in Report GJBX-103(78). The samples were collected by Los Alamos National Laboratory; laboratory analysis and data reporting were performed by the Uranium Resource Evaluation Project at Oak Ridge, Tennessee

Metal accumulation and performance of nestlings of passerine bird species at an urban brownfield site

Energy Technology Data Exchange (ETDEWEB)

Hofer, Charles; Gallagher, Frank J. [Department of Ecology, Evolution and Natural Resources, Rutgers, the State University of New Jersey, 14 College Farm Rd., New Brunswick, NJ 08901-8551 (United States); Holzapfel, Claus, E-mail: holzapfe@andromeda.rutgers.ed [Department of Biological Sciences, Rutgers, the State University of New Jersey, Newark, 195 University Ave., Newark, NJ 07102-1811 (United States)

2010-05-15

The use of passerine species as bioindicators of metal bioaccumulation is often underutilized when examining the wildlife habitat value of polluted sites. In this study we tested feathers of nestlings of two common bird species (house wren and American robin) for accumulation of Pb, Zn, As, Cr, Cu, Fe in comparison of a polluted, urban brownfield with a rural, unpolluted site. House wren nestlings at the study site accumulated significantly greater concentrations of all target metals except Zn. At the polluted site we found significant species differences of metal concentrations in feathers, with house wrens accumulating greater concentrations of Pb, Fe, and Zn but slightly lesser accumulations of Cr and Cu than American robins. Although house wren nestlings demonstrated significant accumulation of metals, these concentrations showed little effect on size metrics or fledge rates during the breeding season compared to nestlings from the control site. - Nestlings of birds in an urban brownfield accumulated soil contaminants but did not show signs of reduced breeding success or growth.

Metal accumulation and performance of nestlings of passerine bird species at an urban brownfield site

International Nuclear Information System (INIS)

Hofer, Charles; Gallagher, Frank J.; Holzapfel, Claus

2010-01-01

The use of passerine species as bioindicators of metal bioaccumulation is often underutilized when examining the wildlife habitat value of polluted sites. In this study we tested feathers of nestlings of two common bird species (house wren and American robin) for accumulation of Pb, Zn, As, Cr, Cu, Fe in comparison of a polluted, urban brownfield with a rural, unpolluted site. House wren nestlings at the study site accumulated significantly greater concentrations of all target metals except Zn. At the polluted site we found significant species differences of metal concentrations in feathers, with house wrens accumulating greater concentrations of Pb, Fe, and Zn but slightly lesser accumulations of Cr and Cu than American robins. Although house wren nestlings demonstrated significant accumulation of metals, these concentrations showed little effect on size metrics or fledge rates during the breeding season compared to nestlings from the control site. - Nestlings of birds in an urban brownfield accumulated soil contaminants but did not show signs of reduced breeding success or growth.

Impact of dust filter installation in ironworks and construction on brownfield area on the toxic metal concentration in street and house dust (Celje, Slovenia).

Science.gov (United States)

Zibret, Gorazd

2012-05-01

This article presents the impact of the ecological investment in ironworks (dust filter installation) and construction works at a highly contaminated brownfield site on the chemical composition of household dust (HD) and street sediment (SS) in Celje, Slovenia. The evaluation is based on two sampling campaigns: the first was undertaken 1 month before the ecological investment became operational and the second 3 years later. The results show that dust filter installations reduced the content of Co, Cr, Fe, Mn, Mo, W and Zn on average by 58% in HD and by 51% in SS. No reduction was observed at sampling points in the upwind direction from the ironworks. By contrast, the impact of the construction works on the highly contaminated brownfield site was detected by a significant increase (on average by 37%) of elements connected to the brownfield contamination in SS. Such increase was not detected in HD.

Destiny of Urban Brownfields: Spatial Patterns and Perceived Consequences of Post-Socialistic Deindustrialization

Czech Academy of Sciences Publication Activity Database

Kunc, J.; Martinát, Stanislav; Tonev, P.; Frantál, Bohumil

41E, February (2014), s. 109-128 ISSN 1842-2845 R&D Projects: GA MŠk EE2.3.20.0025 Institutional support: RVO:68145535 Keywords : brownfields * perception * residents * city of Brno * city of Ostrava Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 0.333, year: 2014 http://rtsa.ro/en/files/RTSA%2041%20E%20-7KUNC,%20MARTINAT,%20TONEV,%20FRANTAL.pdf

Financial resources for the environment: the unsuccessful attempt to create a private financing intermediary for brownfield redevelopment projects

OpenAIRE

Keith Welkes

2005-01-01

This paper analyzes an unsuccessful attempt to establish a financing intermediary for the development of environmentally contaminated property (commonly known as brownfields) in Pennsylvania. The proposed intermediary was entitled Financial Resources for the Environment.

Accounting for land-use efficiency and temporal variations between brownfield remediation alternatives in life-cycle assessment

NARCIS (Netherlands)

Beames, A.; Broekx, S.; Heijungs, R.; Lookman, R.; Boonen, K.; van Geert, Y.; Dendoncker, K.; Seuntjes, P.

2015-01-01

Abstract The latest life-cycle assessment methods account for land use, due to the production, use and disposal of products and services, in terms of ecosystem damage. The process of brownfield remediation converts otherwise idle urban space into productive space. The value to ecosystems in this

Brownfield Action III - Modular use of hydrogeology instruction in the virtual classroom

Science.gov (United States)

Bower, P.; Liddicoat, J.

2009-04-01

Brownfield Action III (BA III) is a network-based, interactive, digital space and simulation developed by Barnard College and the Columbia Center for New Media Teaching and Learning in which students explore and solve problems in environmental forensics. BA III is a proven inquiry-based approach to teaching and learning that, since its inception in 1999, has been recognized as an exemplary curriculum. Indeed, in 2002 it was selected as a national model curriculum by SENCER (Science Education for New Civic Engagements and Responsibilities). BA III provides instruction in environmental site assessments and in the remediation of former industrial sites (brownfields) for secondary and higher education students. The initial full-semester, three hours of weekly laboratory instruction that complements lectures in BA II has been revised for modular use in Hydrology, Environmental Science, and Environmental Ethics undergraduate and graduate courses in the United States. The remediation of brownfields is important because they have potential as recreational, residential, and commercial real estate sites. As part of determining the value of such a site, an environmental site assessment (ESA) is required to determine the nature and extent of any contamination. To reach that objective, BA III contains a narrative that is embedded and to be discovered in simulation; it is a story of groundwater contamination complete with underground contaminant plumes in a fictitious town with buildings, roads, wells, water tower, homes, and businesses as well as a municipal government with relevant historical documents. Student companies work collaboratively in teams of two, sign a contract with a development corporation to conduct a Phase One ESA, receive a realistic budget, and compete with other teams to fulfill the contract while maximizing profit. To reach a valid conclusion in the form of a professional-level ESA and 3-D maps of the physical site, teams construct a detailed narrative

Assessment of the suitability of trees for brownfields reuse in the post-mining landscape

Science.gov (United States)

Mec, J.; Lokajickova, B.; Sotkova, N.; Svehlakova, H.; Stalmachova, B.

2017-10-01

The post-mining landscape of Upper Silesian is deterioration of the original landscape caused by underground coal mining. There are huge ecosystems changes, which have been reclaimed by nature-friendly procedures. The aim of the work is to evaluate the suitability of selected trees for reuse of brownfields in this landscape and proposals for reclamation in the interest areas of Upper Silesian.

Interactive Higher Education Instruction to Advance STEM Instruction in the Environmental Sciences - the Brownfield Action Model

Science.gov (United States)

Liddicoat, J. C.; Bower, P.

2015-12-01

The U.S. Environmental Protection Agency estimates that presently there are over half a million brownfields in the United States, but this number only includes sites for which an Environmental Site Assessment has been conducted. The actual number of brownfields is certainly in the millions and constitutes one of the major environmental issues confronting all communities today. Taught in part or entirely online for more than 15 years in environmental science, engineering, and hydrology courses at over a dozen colleges, universities, and high schools in the United States, Brownfield Action (BA) is an interactive, web-based simulation that combines scientific expertise, constructivist education philosophy, and multimedia to advance the teaching of environmental science (Bower et al., 2011, 2014; Liddicoat and Bower, 2015). In the online simulation and classroom, students form geotechnical consulting companies with a peer chosen at random to solve a problem in environmental forensics. The BA model contains interdisciplinary scientific and social information that are integrated within a digital learning environment that encourages students to construct their knowledge as they learn by doing. As such, the approach improves the depth and coherence of students understanding of the course material. Like real-world environmental consultants and professionals, students are required to develop and apply expertise from a wide range of fields, including environmental science and engineering as well as journalism, medicine, public health, law, civics, economics, and business management. The overall objective is for students to gain an unprecedented appreciation of the complexity, ambiguity, and risk involved in any environmental issue, and to acquire STEM knowledge that can be used constructively when confronted with such an issue.

Brownfields Assessing Contractor Capabilities for Streamlined Site Investigation: Additional Information Regarding All Appropriate Inquiries and Hiring an Environmental Professional

Science.gov (United States)

This document assists Brownfields grantees and other decision makers as they assess the capabilities of contractors and consultants to determine their qualifications to provide streamlined and innovative strategies for the assessment and and cleanup.

Investigation, Pollution Mapping and Simulative Leakage Health Risk Assessment for Heavy Metals and Metalloids in Groundwater from a Typical Brownfield, Middle China.

Science.gov (United States)

Li, Fei; Qiu, Zhenzhen; Zhang, Jingdong; Liu, Wenchu; Liu, Chaoyang; Zeng, Guangming

2017-07-13

Heavy metal and metalloid (Cr, Pb, Cd, Zn, Cu, Ni, As and Hg) concentrations in groundwater from 19 typical sites throughout a typical brownfield were detected. Mean concentrations of toxic metals in groundwater decreased in the order of Cr > Zn > Cu > Cd > Ni > Pb > Hg > As. Concentration of Cr 6+ in groundwater was detected to further study chromium contamination. Cr 6+ and Cd in groundwater were recommended as the priority pollutants because they were generally 1399-fold and 12-foldgreater than permissible limits, respectively. Owing to the fact that a waterproof curtain (WPC) in the brownfield is about to pass the warranty period, a steady two-dimensional water quality model and health risk assessment were applied to simulate and evaluate adverse effects of Cr 6 + and Cd on the water quality of Xiangjiang River and the drinking-water intake of Wangcheng Waterworks. The results indicated that when groundwater in the brownfield leaked with valid curtain prevention, the water quality in Xiangjiang River and drinking-water intake downstream were temporarily unaffected. However, if there was no curtain prevention, groundwater leakage would have adverse impact on water quality of Xiangjiang River. Under the requirements of Class III surface water quality, the pollution belt for Cr 6+ was 7500 m and 200 m for Cd. The non-carcinogenic risk of toxic metals in Xiangjiang River exceeded the threshold in a limited area, but did not threaten Wangcheng Waterworks. By contrast, the carcinogenic risk area for adults was at a transverse distance of 200 m and a longitudinal distance of 18,000 m, which was close to the Wangcheng Waterworks (23,000 m). Therefore, it was essential to reconstruct the WPC in the brownfield for preventing pollution diffusion.

Investigation, Pollution Mapping and Simulative Leakage Health Risk Assessment for Heavy Metals and Metalloids in Groundwater from a Typical Brownfield, Middle China

Science.gov (United States)

Qiu, Zhenzhen; Zhang, Jingdong; Liu, Wenchu; Liu, Chaoyang; Zeng, Guangming

2017-01-01

Heavy metal and metalloid (Cr, Pb, Cd, Zn, Cu, Ni, As and Hg) concentrations in groundwater from 19 typical sites throughout a typical brownfield were detected. Mean concentrations of toxic metals in groundwater decreased in the order of Cr > Zn > Cu > Cd > Ni > Pb > Hg > As. Concentration of Cr6+ in groundwater was detected to further study chromium contamination. Cr6+ and Cd in groundwater were recommended as the priority pollutants because they were generally 1399-fold and 12-foldgreater than permissible limits, respectively. Owing to the fact that a waterproof curtain (WPC) in the brownfield is about to pass the warranty period, a steady two-dimensional water quality model and health risk assessment were applied to simulate and evaluate adverse effects of Cr6 + and Cd on the water quality of Xiangjiang River and the drinking-water intake of Wangcheng Waterworks. The results indicated that when groundwater in the brownfield leaked with valid curtain prevention, the water quality in Xiangjiang River and drinking-water intake downstream were temporarily unaffected. However, if there was no curtain prevention, groundwater leakage would have adverse impact on water quality of Xiangjiang River. Under the requirements of Class III surface water quality, the pollution belt for Cr6+ was 7500 m and 200 m for Cd. The non-carcinogenic risk of toxic metals in Xiangjiang River exceeded the threshold in a limited area, but did not threaten Wangcheng Waterworks. By contrast, the carcinogenic risk area for adults was at a transverse distance of 200 m and a longitudinal distance of 18,000 m, which was close to the Wangcheng Waterworks (23,000 m). Therefore, it was essential to reconstruct the WPC in the brownfield for preventing pollution diffusion. PMID:28703781

Brownfield Dilemmas in the Transformation of Post-Communist Cities. A Case Study of Ostrava, Czech Republic

Czech Academy of Sciences Publication Activity Database

Duží, Barbora; Jakubínský, Jiří

2013-01-01

Roč. 7, č. 2 (2013), s. 53-64 ISSN 1843-6587 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0073; GA MŠk(CZ) EE2.4.31.0056 Institutional support: RVO:67179843 Keywords : Cultural continuity * Demolition * Environmental change perception * Frame analysis * Remediation * Urban brownfields * Urban planning Subject RIV: EH - Ecology, Behaviour

Comparison of risk-based decision-support systems for brownfield site rehabilitation: DESYRE and SADA applied to a Romanian case study.

Science.gov (United States)

Stezar, I C; Pizzol, L; Critto, A; Ozunu, A; Marcomini, A

2013-12-15

Brownfield rehabilitation is an essential step for sustainable land-use planning and management in the European Union. In brownfield regeneration processes, the legacy contamination plays a significant role, firstly because of the persistent contaminants in soil or groundwater which extends the existing hazards and risks well into the future; and secondly, problems from historical contamination are often more difficult to manage than contamination caused by new activities. Due to the complexity associated with the management of brownfield site rehabilitation, Decision Support Systems (DSSs) have been developed to support problem holders and stakeholders in the decision-making process encompassing all phases of the rehabilitation. This paper presents a comparative study between two DSSs, namely SADA (Spatial Analysis and Decision Assistance) and DESYRE (Decision Support System for the Requalification of Contaminated Sites), with the main objective of showing the benefits of using DSSs to introduce and process data and then to disseminate results to different stakeholders involved in the decision-making process. For this purpose, a former car manufacturing plant located in the Brasov area, Central Romania, contaminated chiefly by heavy metals and total petroleum hydrocarbons, has been selected as a case study to apply the two examined DSSs. Major results presented here concern the analysis of the functionalities of the two DSSs in order to identify similarities, differences and complementarities and, thus, to provide an indication of the most suitable integration options. Copyright © 2013 Elsevier Ltd. All rights reserved.

Targeted selection of brownfields from portfolios for sustainable regeneration: User experiences from five cases testing the Timbre\

Czech Academy of Sciences Publication Activity Database

Bartke, S.; Martinát, Stanislav; Klusáček, Petr; Pizzol, L.; Alexandrescu, F.; Frantál, Bohumil; Critto, A.; Zabeo, A.

2016-01-01

Roč. 184, č. 1 (2016), s. 94-107 ISSN 0301-4797 R&D Project s: GA MŠk(CZ) 7E11035 Institutional support: RVO:68145535 Keywords : brownfields * prioritisation * sustainability Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 4.010, year: 2016 http://dx.doi.org/10.1016/j.jenvman.2016.07.037

Targeted selection of brownfields from portfolios for sustainable regeneration: User experiences from five cases testing the Timbre\

Czech Academy of Sciences Publication Activity Database

Bartke, S.; Martinát, Stanislav; Klusáček, Petr; Pizzol, L.; Alexandrescu, F.; Frantál, Bohumil; Critto, A.; Zabeo, A.

2016-01-01

Roč. 184, č. 1 (2016), s. 94-107 ISSN 0301-4797 R&D Projects: GA MŠk(CZ) 7E11035 Institutional support: RVO:68145535 Keywords : brownfields * prioritisation * sustainability Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 4.010, year: 2016 http://dx.doi.org/10.1016/j.jenvman.2016.07.037

Expedited Remedial Action Program (SB 923): A California Brownfields initiative

Energy Technology Data Exchange (ETDEWEB)

Cambridge, M.; Wolfenden, A.K.

1996-12-31

California`s Expedited Remedial Action Program (ERAP) created a comprehensive program that promotes an equitable and expedited approach for redevelopment of properties contaminated with hazardous substances. This bill embodies an emerging trend in environmental policy that permits flexibility, cooperation and creativity without compromising protection to public health or the environment. Within the California Environmental Protection Agency, the Department of Toxic Substances Control (DTSC) is promoting a number of programs to facilitate the restoration of contaminated properties as part of its Brownfields initiative. ERAP represents a potentially more efficient process to remediate sites by minimizing economic risks through a clearly identified liability scheme, indemnifying future owners through a covenant not to sue, and providing risk based cleanups that are based on the permanent use of the site.

Role of Sports Facilities in the Process of Revitalization of Brownfields

Science.gov (United States)

Taraszkiewicz, Karolina; Nyka, Lucyna

2017-10-01

The paper gives an evidence that building a large sports facility can generate beneficial urban space transformation and a significant improvement in the dilapidated urban areas. On the basis of theoretical investigations and case studies it can be proved that sports facilities introduced to urban brownfields could be considered one of the best known large scale revitalization methods. Large urban spaces surrounding sport facilities such as stadiums and other sports arenas create excellent conditions for designing additional recreational function, such as parks and other green areas. Since sports venues are very often located on brownfields and post-industrial spaces, there are usually well related with canals, rivers and other water routes or reservoirs. Such spaces become attractors for large groups of people. This, in effect initiate the process of introducing housing estates to the area and gradually the development of multifunctional urban structure. As research shows such process of favourable urban transformation could be based on implementing several important preconditions. One of the most significant one is the formation of the new communication infrastructure, which links newly formed territories with the well-structured urban core. Well planned program of the new sports facilities is also a very important factor. As research shows multifunctional large sports venues may function in the city as a new kind of public space that stimulates new genres of social relations, offers entertainment and free time activities, not necessarily related with sport. This finally leads to the creation of new jobs and more general improvement of a widely understood image of the district, growing appreciation for the emerging new location and consequently new investments in the neighbouring areas. The research gives new evidence to the ongoing discussion on the drawbacks and benefits of placing stadiums and sports arenas in the urban core.

Location Matters! Exploring Brownfields regeneration in a Spatial Context (Case Study of the South Moravian Region, Czech Republic)

Czech Academy of Sciences Publication Activity Database

Frantál, Bohumil; Kunc, Josef; Nováková, Eva; Klusáček, Petr; Martinát, Stanislav; Osman, Robert

2013-01-01

Roč. 21, č. 2 (2013), s. 5-19 ISSN 1210-8812 R&D Projects: GA MŠk(CZ) 7E11035 Institutional support: RVO:68145535 Keywords : brownfields * success factors * spatial analysis Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 0.341, year: 2013 http://www.geonika.cz/EN/research/ENMgr/MGR_2013_02.pdf

Integration of the subsurface and the surface sectors for a more holistic approach for sustainable redevelopment of urban brownfields.

Science.gov (United States)

Norrman, Jenny; Volchko, Yevheniya; Hooimeijer, Fransje; Maring, Linda; Kain, Jaan-Henrik; Bardos, Paul; Broekx, Steven; Beames, Alistair; Rosén, Lars

2016-09-01

This paper presents a holistic approach to sustainable urban brownfield redevelopment where specific focus is put on the integration of a multitude of subsurface qualities in the early phases of the urban redevelopment process, i.e. in the initiative and plan phases. Achieving sustainability in brownfield redevelopment projects may be constrained by a failure of engagement between two key expert constituencies: urban planners/designers and subsurface engineers, leading to missed opportunities and unintended outcomes in the plan realisation phase. A more integrated approach delivers greater benefits. Three case studies in the Netherlands, Belgium and Sweden were used to test different sustainability assessment instruments in terms of the possibility for knowledge exchange between the subsurface and the surface sectors and in terms of cooperative learning among experts and stakeholders. Based on the lessons learned from the case studies, a generic decision process framework is suggested that supports holistic decision making. The suggested framework focuses on stakeholder involvement, communication, knowledge exchange and learning and provides an inventory of instruments that can support these processes. Copyright © 2016 Elsevier B.V. All rights reserved.

The ontological turn meets the certainty of death.

Science.gov (United States)

McDonald, Maryon

2017-08-01

The 'ontological turn' involves some anthropological points of long standing but the approaches recently coordinated into this turn have been presented as a 'call to arms', as shaking up 'mono-realist singularities' and as inherently political. This fighting talk has no doubt made important contributions to anthropology and insights from the ontological turn can help in anthropological understandings of medical practices. However, this paper contends that this helpfulness is also limited and that a call to arms may be inappropriate. This point is made through an ethnographic understanding of medical concern about the diagnosis of death.

Insights into a 20-ha multi-contaminated brownfield megasite: An environmental forensics approach

Energy Technology Data Exchange (ETDEWEB)

Gallego, J.R., E-mail: jgallego@uniovi.es; Rodríguez-Valdés, E.; Esquinas, N.; Fernández-Braña, A.; Afif, E.

2016-09-01

Here we addressed the contamination of soils in an abandoned brownfield located in an industrial area. Detailed soil and waste characterisation guided by historical information about the site revealed pyrite ashes (a residue derived from the roasting of pyrite ores) as the main environmental risk. In fact, the disposal of pyrite ashes and the mixing of these ashes with soils have affected a large area of the site, thereby causing heavy metal(loid) pollution (As and Pb levels reaching several thousands of ppm). A full characterisation of the pyrite ashes was thus performed. In this regard, we determined the bioavailable metal species present and their implications, grain-size distribution, mineralogy, and Pb isotopic signature in order to obtain an accurate conceptual model of the site. We also detected significant concentrations of pyrogenic benzo(a)pyrene and other PAHs, and studied the relation of these compounds with the pyrite ashes. In addition, we examined other waste and spills of minor importance within the study site. The information gathered offered an insight into pollution sources, unravelled evidence from the industrial processes that took place decades ago, and identified the co-occurrence of contaminants by means of multivariate statistics. The environmental forensics study carried out provided greater information than conventional analyses for risk assessment purposes and for the selection of clean-up strategies adapted to future land use. - Highlights: • Complex legacy of contamination afflicts 20-ha brownfield • As and Pb highest soil pollutants • Forensic study reveals main waste and spills. • Comprehensive study of pyrite ashes (multi-point source of pollution) • Co-occurrence of PAH also linked to pyrite ashes.

Insights into a 20-ha multi-contaminated brownfield megasite: An environmental forensics approach

International Nuclear Information System (INIS)

Gallego, J.R.; Rodríguez-Valdés, E.; Esquinas, N.; Fernández-Braña, A.; Afif, E.

2016-01-01

Here we addressed the contamination of soils in an abandoned brownfield located in an industrial area. Detailed soil and waste characterisation guided by historical information about the site revealed pyrite ashes (a residue derived from the roasting of pyrite ores) as the main environmental risk. In fact, the disposal of pyrite ashes and the mixing of these ashes with soils have affected a large area of the site, thereby causing heavy metal(loid) pollution (As and Pb levels reaching several thousands of ppm). A full characterisation of the pyrite ashes was thus performed. In this regard, we determined the bioavailable metal species present and their implications, grain-size distribution, mineralogy, and Pb isotopic signature in order to obtain an accurate conceptual model of the site. We also detected significant concentrations of pyrogenic benzo(a)pyrene and other PAHs, and studied the relation of these compounds with the pyrite ashes. In addition, we examined other waste and spills of minor importance within the study site. The information gathered offered an insight into pollution sources, unravelled evidence from the industrial processes that took place decades ago, and identified the co-occurrence of contaminants by means of multivariate statistics. The environmental forensics study carried out provided greater information than conventional analyses for risk assessment purposes and for the selection of clean-up strategies adapted to future land use. - Highlights: • Complex legacy of contamination afflicts 20-ha brownfield • As and Pb highest soil pollutants • Forensic study reveals main waste and spills. • Comprehensive study of pyrite ashes (multi-point source of pollution) • Co-occurrence of PAH also linked to pyrite ashes

Sustainable urban development in a city affected by heavy industry and mining? Case study of brownfields in Karvina, Czech Republic

Czech Academy of Sciences Publication Activity Database

Martinát, S.; Dvořák, Petr; Frantál, B.; Klusáček, P.; Kunc, J.; Navrátil, J.; Osman, R.; Turečková, K.; Reed, M.

2016-01-01

Roč. 118, April 2016 (2016), s. 78-87 ISSN 0959-6526 R&D Projects: GA TA ČR(CZ) TD020259 Institutional support: RVO:68145535 Keywords : brownfields * human geography * spatial analysis Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 5.715, year: 2016 http://www.sciencedirect.com/science/article/pii/S095965261600055X

Where Do Jamaican Adolescents Turn for Psychological Help?

Science.gov (United States)

Williams, Dahra Jackson

2012-01-01

Background: Stigma about mental health is a significant problem in Jamaica and the wider English-speaking Caribbean. In general, negative attitudes and opinions about mental illness have been found to negatively impact psychological help-seeking among several populations. Objective: This study examined Jamaican adolescents' preferential sources of…

Actor networks and the construction of applicable knowledge: the case of the Timbre Brownfield Prioritization Tool

Czech Academy of Sciences Publication Activity Database

Alexandrescu, F.; Klusáček, Petr; Bartke, S.; Osman, Robert; Frantál, Bohumil; Martinát, Stanislav; Kunc, Josef; Pizzol, L.; Zabeo, A.; Giubilato, E.; Critto, A.; Bleicher, A.

2017-01-01

Roč. 19, č. 5 (2017), s. 1323-1334 ISSN 1618-954X R&D Projects: GA MŠk(CZ) 7E11035; GA ČR(CZ) GA17-26934S Institutional support: RVO:68145535 Keywords : actor network theory * applicable knowledge * brownfield prioritization * four moments of translation * end-users Subject RIV: DE - Earth Magnetism, Geodesy, Geography OBOR OECD: Environment al sciences (social aspects) Impact factor: 3.331, year: 2016 https://link.springer.com/article/10.1007/s10098-016-1331-8

Actor networks and the construction of applicable knowledge: the case of the Timbre Brownfield Prioritization Tool

Czech Academy of Sciences Publication Activity Database

Alexandrescu, F.; Klusáček, Petr; Bartke, S.; Osman, Robert; Frantál, Bohumil; Martinát, Stanislav; Kunc, Josef; Pizzol, L.; Zabeo, A.; Giubilato, E.; Critto, A.; Bleicher, A.

2017-01-01

Roč. 19, č. 5 (2017), s. 1323-1334 ISSN 1618-954X R&D Projects: GA MŠk(CZ) 7E11035; GA ČR(CZ) GA17-26934S Institutional support: RVO:68145535 Keywords : actor network theory * applicable knowledge * brownfield prioritization * four moments of translation * end-users Subject RIV: DE - Earth Magnetism, Geodesy, Geography OBOR OECD: Environmental sciences (social aspects) Impact factor: 3.331, year: 2016 https://link.springer.com/article/10.1007/s10098-016-1331-8

Factors affecting brownfield regeneration in post-socialist space: The case of the Czech Republic

Czech Academy of Sciences Publication Activity Database

Osman, Robert; Frantál, Bohumil; Klusáček, Petr; Kunc, Josef; Martinát, Stanislav

2015-01-01

Roč. 48, November 2015 (2015), s. 309-316 ISSN 0264-8377 R&D Projects: GA TA ČR(CZ) TD020259; GA MŠk(CZ) 7E11035 Institutional support: RVO:68145535 Keywords : brownfields * success factors * land use management Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 2.768, year: 2015 http://ac.els-cdn.com/S0264837715001702/1-s2.0-S0264837715001702-main.pdf?_tid=0d849052-9f28-11e5-8c6b-00000aacb35f&acdnat=1449743188_a27012ae5c616955d77af87b79b63135

The South Wilmington Area remedial cost estimating methodology (RCEM) -- A planning tool and reality check for brownfield development

International Nuclear Information System (INIS)

Yancheski, T.B.; Swanson, J.E.

1996-01-01

The South Wilmington Area (SWA), which is comprised of 200 acres of multi-use urban lowlands adjacent to the Christina River, is a brownfields area that has been targeted for redevelopment/restoration as part of a major waterfront revitalization project for the City of Wilmington, Delaware. The vision for this riverfront development, which is being promoted by a state-funded development corporation, includes plans for a new harbor, convention and entertainment facilities, upscale residences, an urban wildlife refuge, and the restoration of the Christina River. However, the environmental quality of the SWA has been seriously impacted by an assortment of historic and current heavy industrial land-uses since the late 1800's, and extensive environmental cleanup of this area will be required as part of any redevelopment plan. Given that the environmental cleanup cost will be a major factor in determining the overall economic feasibility of brownfield development in the SWA, a reliable means of estimating potential preliminary remedial costs, without the expense of costly investigative and engineering studies, was needed to assist with this redevelopment initiative. The primary chemicals-of-concern (COCs) area-wide are lead and petroleum compounds, however, there are hot-spot occurrences of polynuclear aromatic hydrocarbons (PAHs), PCBs, and other heavy metals such as arsenic and mercury

Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) or Superfund, Section 104(k); and CERCLA Section 104(d); ‘‘ ‘Discounted Loans’ Under Brownfields Revolving Loan Fund Grants’

Science.gov (United States)

Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) or Superfund, Section 104(k); and CERCLA Section 104(d); ‘‘ ‘Discounted Loans’ Under Brownfields Revolving Loan Fund Grants’`

BALANCE 4P - Balancing decisions for urban brownfield redevelopment : Technical report of the BALANCE 4P project of the SNOWMAN Network coordinated call IV

NARCIS (Netherlands)

Norrman, J.; Volchko, Y.; Maring, L; Hooimeijer, F.L.; Broekx, S.; Garcao, R.; Beames, A.; Kain, J.H.; Ivarsson, M.; Touchant, K.

2015-01-01

Land take as a result of urbanization is one of the major soil threats in Europe. One of the key measures to prevent further urban sprawl and additional land take, is redevelopment of urban brownfields: underused urban areas with, in many cases, soil and groundwater pollution. The latter issue can

Spontaneous plant colonization of brownfield soil and sludges and effects on substrate properties and pollutants mobility

Science.gov (United States)

Rocco, Claudia; Agrelli, Diana; Gonzalez, Maria Isabel; Mingo, Antonio; Motti, Riccardo; Stinca, Adriano; Coppola, Ida; Adamo, Paola

2017-04-01

This work was done on brownfield soil and sludges from a dismantled steel plant, moderately polluted by heavy metals (mainly Pb and Zn), 1) to analyzed the effects of substrate properties and environmental conditions on spontaneous vegetation; 2) to assess changes in the chemical properties of soils and sludges, with particular reference to the mobility and bioavailability of pollutants, induced by spontaneous plants revegetation. From 2006 to 2011, spontaneous plant colonization was monitored in the presence or absence of acidic peat both inside the degraded brownfield site and after transferal into a nearby Oak Park environment. During the five experimental years the vegetation growth was monitored using phytosociological method and data analyzed statistically. Both substrates, before and after plant growth, were analyzed for main chemical properties. Metals mobility and bioavailability was assessed using single (H2O; DTPA) and sequential extractions (EU-BCR). At the end of the experiment, plant ability to uptake metal was evaluated on selected species. Overall, 57 plant species grew healthily on the substrates. The combination of soil and sludges with peat resulted in an effective revegetation with a sensible increasing of plants biomass. Most of the species were found in the park (91%), showing plant colonization was mainly affected by the immediate environment rather than by substrate properties. Furthermore, after the five years, the substrate properties (pH, O.C.) were slightly affected by plant growth and, although metal pollutants in both substrates are characterized by low water solubility and DTPA availability, after plants growth an increase (even if not significant) of rhizospheric Cu, Fe, Mn and Zn solubility in H2O was detected. Metals speciation indicated a low risk of Pb and Zn mobility being either largely trapped in the mineralogical structure of oxides and silicates and occluded in easily reducible manganese or iron oxides. Restricted metal

Soil metal concentrations and vegetative assemblage structure in an urban brownfield

International Nuclear Information System (INIS)

Gallagher, Frank J.; Pechmann, Ildiko; Bogden, John D.; Grabosky, Jason; Weis, Peddrick

2008-01-01

Anthropogenic sources of toxic elements have had serious ecological and human health impacts. Analysis of the soil samples from a brownfield within Liberty State Park, Jersey City, NJ, USA, showed that arsenic, chromium, lead, zinc and vanadium exist at concentrations above those considered ambient for the area. Accumulation and translocation features were characterized for the dominant plant species of four vegetative assemblages. The trees Betula populifolia and Populus deltoides were found to be accumulating Zn in leaf tissue at extremely high levels. B. populifolia, P. deltoides and Rhus copallinum accumulated Cr primarily in the root tissue. A comparison of soil metal maps and vegetative assemblage maps indicates that areas of increasing total soil metal load were dominated by successional northern hardwoods while semi-emergent marshes consisting mostly of endemic species were restricted primarily to areas of low soil metal load. - The study yields insight into the impact of metal contaminates soils on vegetative assemblage structure and development

Site recycling: From Brownfield to football field

Energy Technology Data Exchange (ETDEWEB)

Lee, C.; Haas, W.L. [HDR Engineering Inc., Charlotte, NC (United States)

1995-07-01

The Carolina Panther`s new home, Carolinas Stadium, will be impressive. It will include a 75,000-seat stadium, about 2,000 parking spaces, and a practice facility equipped with three full-sized football fields, all located on 30 acres bordering the central business district of Charlotte, NC. Fans of the NFL expansion team may never know that, until recently, 13 of those 30 acres were a former state Superfund site contaminated by a commercial scrapyard that had operated from the early 1930s to 1983. The salvage of nonferrous metals from lead-acid batteries, copper from transformers and other electrical equipment, and ferrous metal scrap from junk automobiles at the Smith Metal and Iron (SMI) site had left a complex contamination legacy. The soil contained lead, polychlorinated biphenyls (PCBs), lesser amounts of semivolatiles (polyaromatic hydrocarbons, or PAHs), and volatile organic compounds and petroleum hydrocarbons. The site had remained dormant, like many former industrial sites that have come be called {open_quotes}brownfields,{close_quotes} for nearly a decade when in 1993, Charlotte was selected as the future home of the Carolina Panthers, a National Football League expansion team. The city was able to attract the team in part by offering to redevelop the site, a prime location adjacent to the downtown area. An eight-month-long site remediation effort by HDR Engineering Inc. was completed March 31, on schedule for a June 1996 unveiling of the team`s new facility.

Recuperación paisajística de vertederos de basura: un ejemplo de brownfields

Directory of Open Access Journals (Sweden)

Caceres Cortez Ana Tereza

2007-11-01

Full Text Available Los vertederos de basuras y los basureros que cierran sus actividades son llamados brownfields; tienen necesidad de mantenimiento debido al potencial de contaminación que presentan. Tras su cierre, deben tener un proyecto de revitalización y de reintegración al paisaje que beneficie al ambiente y a la comunidad cercana. Nuestra investigación se enfoca en las experiencias que se han dado en el Brasil, con el objetivo de mostrar las diversas metodologías de siembra de aquellas especies de plantas que mejor se adaptan a este ambiente, teniendo en cuenta lo estrecho de la capa de la tierra y las células subsecuentes con basura orgánica e inorgánica.

Recuperación paisajística de vertederos de basura: un ejemplo de brownfields

Directory of Open Access Journals (Sweden)

Ana Tereza Caceres Cortez

2007-01-01

Full Text Available Los vertederos de basuras y los basureros que cierran sus actividades son llamados brownfields; tienen necesidad de mantenimiento debido al potencial de contaminación que presentan. Tras su cierre, deben tener un proyecto de revitalización y de reintegración al paisaje que beneficie al ambiente y a la comunidad cercana. Nuestra investigación se enfoca en las experiencias que se han dado en el Brasil, con el objetivo de mostrar las diversas metodologías de siembra de aquellas especies de plantas que mejor se adaptan a este ambiente, teniendo en cuenta lo estrecho de la capa de la tierra y las células subsecuentes con basura orgánica e inorgánica.

Comprehensive waste characterization and organic pollution co-occurrence in a Hg and As mining and metallurgy brownfield

Energy Technology Data Exchange (ETDEWEB)

Gallego, J.R., E-mail: jgallego@uniovi.es [Environmental Technology, Biotechnology and Geochemistry Group, C/Gonzalo Gutiérrez Quirós s/n, 33600 Mieres, Asturias (Spain); Esquinas, N.; Rodríguez-Valdés, E.; Menéndez-Aguado, J.M. [Environmental Technology, Biotechnology and Geochemistry Group, C/Gonzalo Gutiérrez Quirós s/n, 33600 Mieres, Asturias (Spain); Sierra, C. [Environmental Technology, Biotechnology and Geochemistry Group, C/Gonzalo Gutiérrez Quirós s/n, 33600 Mieres, Asturias (Spain); Escuela Superior Politécnica del Litoral, Guayaquil (Ecuador)

2015-12-30

Highlights: • Complex legacy of contamination afflicts As–Hg brownfields. • As- and Hg-rich waste analyzed in a paradigmatic study site. • Co-ocurrence of a complex speciation of As and Hg, and organic pollution (PAHs). • Arsenolite was determined to be the main source of risk at the site. • Unexpected Hg organo-compounds found. - Abstract: The abandonment of Hg–As mining and metallurgy sites, together with long-term weathering, can dramatically degrade the environment. In this work it is exemplified the complex legacy of contamination that afflicts Hg–As brownfields through the detailed study of a paradigmatic site. Firstly, an in-depth study of the former industrial process was performed to identify sources of different types of waste. Subsequently, the composition and reactivity of As- and Hg-rich wastes (calcines, As-rich soot, stupp, and flue dust) was analyzed by means of multielemental analysis, mineralogical characterization (X-ray diffraction, electronic, and optical microscopy, microbrobe), chemical speciation, and sequential extractions. As-rich soot in the form of arsenolite, a relatively mobile by-product of the pyrometallurgical process, and stupp, a residue originated in the former condensing system, were determined to be the main risk at the site. In addition, the screening of organic pollution was also aimed, as shown by the outcome of benzo(a) pyrene and other PAHs, and by the identification of unexpected Hg organo-compounds (phenylmercury propionate). The approach followed unravels evidence from waste from the mining and metallurgy industry that may be present in other similar sites, and identifies unexpected contaminants overlooked by conventional analyses.

Business Intelligence: Turning Knowledge into Power

Science.gov (United States)

Endsley, Krista

2009-01-01

Today, many school districts are turning to business intelligence tools to retrieve, organize, and share knowledge for faster analysis and more effective, guided decision making. Business intelligence (BI) tools are the technologies and applications that gather and report information to help an organization's leaders make better decisions. BI…

Investigating Heavy Metal Pollution in Mining Brownfield and Its Policy Implications: A Case Study of the Bayan Obo Rare Earth Mine, Inner Mongolia, China

Science.gov (United States)

Pan, Yuxue; Li, Haitao

2016-04-01

The rapid urbanization of China and associated demand for land resources necessitates remediation, redevelopment, and reclamation of contaminated soil. Before these measures are taken, a basic investigation and inventory of heavy metal (HM) pollution levels in contaminated soil is necessary for establishing and implementing the redevelopment plan. In the present study, to identify the policy implications of inventorying and mapping HM pollution of soil in brownfields throughout China, the Bayan Obo giant rare earth element (REE)-Nb-Fe ore deposit of Baotou in Inner Mongolia, China, which is the largest REE mineral deposit in the world, was taken as a case study. Soil samples from 24 sites in Bayan Obo mining area (MA) and 76 sites in mine tailing area (TA) were collected for determining contents of soil HMs (Cr, Cd, Pb, Cu, and Zn). The results showed that the average concentrations of Cr, Cd, Pb, Cu, and Zn in both MA and TA were all higher than their corresponding background values for Inner Mongolia but lower than the Class II criteria of the National Soil Quality Standards of China (GB 15618—1995). Enrichment factor (EF) analysis of the soil samples indicated that the soil in the brownfield sites was highly enriched with Cr, Cd, Pb, Cu, and Zn compared to the corresponding background values. In MA, the EF for Cd was the highest among the studied elements, while in TA, the EF for Cr (3.45) was the highest, closely followed by the EF for Cd (3.34). The potential ecological risk index (RI) indicated a moderate potential ecological risk from the studied HMs in MA and a low potential ecological risk in TA, and the results of RI also suggested that the soil was most heavily polluted by Cd. According to the spatial distribution maps of HM, contamination hot-spots were primarily located near mining-related high-pollution plants. Based on the results, policy recommendations are proposed related to brownfield management in urban planning.

Investigating Heavy Metal Pollution in Mining Brownfield and Its Policy Implications: A Case Study of the Bayan Obo Rare Earth Mine, Inner Mongolia, China.

Science.gov (United States)

Pan, Yuxue; Li, Haitao

2016-04-01

The rapid urbanization of China and associated demand for land resources necessitates remediation, redevelopment, and reclamation of contaminated soil. Before these measures are taken, a basic investigation and inventory of heavy metal (HM) pollution levels in contaminated soil is necessary for establishing and implementing the redevelopment plan. In the present study, to identify the policy implications of inventorying and mapping HM pollution of soil in brownfields throughout China, the Bayan Obo giant rare earth element (REE)-Nb-Fe ore deposit of Baotou in Inner Mongolia, China, which is the largest REE mineral deposit in the world, was taken as a case study. Soil samples from 24 sites in Bayan Obo mining area (MA) and 76 sites in mine tailing area (TA) were collected for determining contents of soil HMs (Cr, Cd, Pb, Cu, and Zn). The results showed that the average concentrations of Cr, Cd, Pb, Cu, and Zn in both MA and TA were all higher than their corresponding background values for Inner Mongolia but lower than the Class II criteria of the National Soil Quality Standards of China (GB 15618-1995). Enrichment factor (EF) analysis of the soil samples indicated that the soil in the brownfield sites was highly enriched with Cr, Cd, Pb, Cu, and Zn compared to the corresponding background values. In MA, the EF for Cd was the highest among the studied elements, while in TA, the EF for Cr (3.45) was the highest, closely followed by the EF for Cd (3.34). The potential ecological risk index (RI) indicated a moderate potential ecological risk from the studied HMs in MA and a low potential ecological risk in TA, and the results of RI also suggested that the soil was most heavily polluted by Cd. According to the spatial distribution maps of HM, contamination hot-spots were primarily located near mining-related high-pollution plants. Based on the results, policy recommendations are proposed related to brownfield management in urban planning.

Body shape helps legged robots climb and turn in complex 3-D terrains

Science.gov (United States)

Han, Yuanfeng; Wang, Zheliang; Li, Chen

Analogous to streamlined shapes that reduce drag in fluids, insects' ellipsoid-like rounded body shapes were recently discovered to be ``terradynamically streamlined'' and enhance locomotion in cluttered terrain by facilitating body rolling. Here, we hypothesize that there exist more terradynamic shapes that facilitate other modes of locomotion like climbing and turning in complex 3-D terrains by facilitating body pitching and yawing. To test our hypothesis, we modified the body shape of a legged robot by adding an elliptical and a rectangular shell and tested how it negotiated with circular and square vertical pillars. With a rectangular shell the robot always pitched against square pillars in an attempt to climb, whereas with an elliptical shell it always yawed and turned away from circular pillars given a small initial lateral displacement. Square / circular pillars facilitated pitching / yawing, respectively. To begin to reveal the contact physics, we developed a locomotion energy landscape model. Our model revealed that potential energy barriers to transition from pitching to yawing are high for angular locomotor and obstacle shapes (rectangular / square) but vanish for rounded shapes (elliptical / circular). Our study supports the plausibility of locomotion energy landscapes for understanding the rich locomotor transitions in complex 3-D terrains.

Helping Young Children in Frightening Times.

Science.gov (United States)

Young Children, 2001

2001-01-01

Presents ways parents and other adults can help young children deal with tragedy and violence in the wake of terrorist attacks on the United States. Suggests giving reassurance and physical comfort, providing structure and stability, expecting a range of reactions, helping children to talk if they are ready, turning off the television, and…

Soil metal concentrations and productivity of Betula populifolia (gray birch) as measured by field spectrometry and incremental annual growth in an abandoned urban Brownfield in New Jersey

Energy Technology Data Exchange (ETDEWEB)

Gallagher, Frank J. [Urban Forestry Program, Department of Ecology, Evolution and Natural Resources, Rutgers, State University, 14 College Farm Road, New Brunswick, NJ 08901-8551 (United States); Pechmann, Ildiko [Department of Biological Sciences, Rutgers, State University, 113 University Avenue, Newark, NJ 07102 (United States)], E-mail: pildiko@andromeda.rutgers.edu; Bogden, John D. [Department of Preventive Medicine and Community Health, University of Medicine and Dentistry of New Jersey - N. J. Medical School, P.O. Box 1709, Newark, NJ 07101-1709 (United States); Grabosky, Jason [Urban Forestry Program, Department of Ecology, Evolution and Natural Resources, Rutgers, State University, 14 College Farm Road, New Brunswick, NJ 08901-8551 (United States); Weis, Peddrick [Department of Radiology, University of Medicine and Dentistry of New Jersey - N. J. Medical School, P.O. Box 1709, Newark, NJ 07101-1709 (United States)

2008-12-15

A forested brownfield within Liberty State Park, Jersey City, New Jersey, USA, has soils with arsenic, chromium, lead, zinc and vanadium at concentrations above those considered ambient for the area. Using both satellite imagery and field spectral measurements, this study examines plant productivity at the assemblage and individual specimen level. Longer term growth trends (basal area increase in tree cores) were also studied. Leaf chlorophyll content within the hardwood assemblage showed a threshold model for metal tolerance, decreasing significantly beyond a soil total metal load (TML) of 3.0. Biomass production (calculated with RG - Red/Green Ratio Index) in Betula populifolia (gray birch), the co-dominant tree species, had an inverse relationship with the Zn concentration in leaf tissue during the growing season. Growth of B. populifolia exhibited a significant relationship with TML. Assemblage level NDVI and individual tree NDVI also had significant decreases with increasing TML. Ecosystem function measured as plant production is impaired at a critical soil metal load. - Ecosystem function as measured by plant production is impaired at a critical soil metal load (TML above 3) in northern hardwood assemblages growing in a metal-contaminated brownfield.

Soil metal concentrations and productivity of Betula populifolia (gray birch) as measured by field spectrometry and incremental annual growth in an abandoned urban Brownfield in New Jersey

International Nuclear Information System (INIS)

Gallagher, Frank J.; Pechmann, Ildiko; Bogden, John D.; Grabosky, Jason; Weis, Peddrick

2008-01-01

A forested brownfield within Liberty State Park, Jersey City, New Jersey, USA, has soils with arsenic, chromium, lead, zinc and vanadium at concentrations above those considered ambient for the area. Using both satellite imagery and field spectral measurements, this study examines plant productivity at the assemblage and individual specimen level. Longer term growth trends (basal area increase in tree cores) were also studied. Leaf chlorophyll content within the hardwood assemblage showed a threshold model for metal tolerance, decreasing significantly beyond a soil total metal load (TML) of 3.0. Biomass production (calculated with RG - Red/Green Ratio Index) in Betula populifolia (gray birch), the co-dominant tree species, had an inverse relationship with the Zn concentration in leaf tissue during the growing season. Growth of B. populifolia exhibited a significant relationship with TML. Assemblage level NDVI and individual tree NDVI also had significant decreases with increasing TML. Ecosystem function measured as plant production is impaired at a critical soil metal load. - Ecosystem function as measured by plant production is impaired at a critical soil metal load (TML above 3) in northern hardwood assemblages growing in a metal-contaminated brownfield

The Relational Antecedents of Interpersonal Helping

DEFF Research Database (Denmark)

Stea, Diego; Pedersen, Torben; Foss, Nicolai Juul

2017-01-01

networks are also associated with cognitive costs, which may reduce the focal employee's ability to both recognize the need for help and engage in helping behaviours. For these reasons, the authors assert an inverted U-shaped relation between the size of an ego's social network and engagement in helping...... behaviour. However, high-quality relationships imply higher mutual understanding between the actors, and hence lower cognitive costs. In turn, the position (and threshold) of the curve between network size and interpersonal helping should be influenced by the quality of the relationship between the provider...

Turn by Turn Measurements at the KEK-ATF

CERN Document Server

Renier, Y; Tomas, R; Wendt, M; Eddy, N; Kubo, K; Kuroda, S; Naito, T; Okugi, T; Terunuma, N; Urakawa, J

2013-01-01

The ATF damping ring has been upgraded with new read-out electronics for the beam position monitors (BPM), capable to acquire the beam orbits on a turn-by-turn basis, as well as in a high resolution averaging mode. The new BPM system allows to improve optic corrections and to achieve an even smaller vertical emittance (<2pm). Experimental results are presented based on turn-by-turn beam orbit measurements in the ring, for estimating the β functions and dispersion along the lattice. A fast method to measure spectral line amplitude in a few turns is also presented, including the evaluation of chromaticity.

Turning points in the history of mathematics

CERN Document Server

Grant, Hardy

2015-01-01

This book explores some of the major turning points in the history of mathematics, ranging from ancient Greece to the present, demonstrating the drama that has often been a part of its evolution. Studying these breakthroughs, transitions, and revolutions, their stumbling-blocks and their triumphs, can help illuminate the importance of the history of mathematics for its teaching, learning, and appreciation. Some of the turning points considered are the rise of the axiomatic method (most famously in Euclid), and the subsequent major changes in it (for example, by David Hilbert); the “wedding,” via analytic geometry, of algebra and geometry; the “taming” of the infinitely small and the infinitely large; the passages from algebra to algebras, from geometry to geometries, and from arithmetic to arithmetics; and the revolutions in the late nineteenth and early twentieth centuries that resulted from Georg Cantor’s creation of transfinite set theory. The origin of each turning point is discussed, along with...

Help Stop the Flu | NIH MedlinePlus the Magazine

Science.gov (United States)

... page please turn Javascript on. Feature: Flu Shot Help Stop the Flu Past Issues / Winter 2011 Table ... CDC recommends that Americans do the following to help stop the flu: Cover nose and mouth with ...

Pilot study: Assessing the effect of continual position monitoring technology on compliance with patient turning protocols

OpenAIRE

Schutt, Suann Cirigliano; Tarver, Christine; Pezzani, Michelle

2017-01-01

Abstract Aim The study aim was to evaluate if continual patient position monitoring, taking into account self‐turns and clinician‐assisted turns, would increase the percentage of time a patient's position changed at least every 2 hr. Background While patient turning has clinical benefits, current models to help staff remember to turn patients, such as “turn clocks” and timers, have not resulted in high compliance with turning protocols. In addition, reminders are based on arbitrary 2‐hr windo...

Recuperación paisajística de vertederos de basura: un ejemplo de brownfields

Directory of Open Access Journals (Sweden)

Ana Tereza Caceres Cortez

2007-01-01

Full Text Available Los vertederos de basuras y los basureros que cierran sus actividades son llamados brownfields; tienen  necesidad  de  mantenimiento  debido  al  potencial  de  contaminación  que  presentan.  Tras  su  cierre, deben  tener  un  proyecto  de  revitalización  y  de reintegración  al  paisaje  que  beneficie  al  ambiente  y  a  la comunidad cercana. Nuestra investigación se enfoca en las experiencias que se han dado en el Brasil, con el  objetivo  de  mostrar  las  diversas  metodologías  de  siembra  de  aquellas  especies  de  plantas  que  mejor  se adaptan a este ambiente, teniendo en cuenta lo estrecho de la capa de la tierra y las células subsecuentes con basura orgánica e inorgánica.

Guide for Identifying and Converting High-Potential Petroleum Brownfield Sites to Alternative Fuel Stations

Energy Technology Data Exchange (ETDEWEB)

Johnson, C.; Hettinger, D.; Mosey, G.

2011-05-01

Former gasoline stations that are now classified as brownfields can be good sites to sell alternative fuels because they are in locations that are convenient to vehicles and they may be seeking a new source of income. However, their success as alternative fueling stations is highly dependent on location-specific criteria. First, this report outlines what these criteria are, how to prioritize them, and then applies that assessment framework to five of the most popular alternative fuels--electricity, natural gas, hydrogen, ethanol, and biodiesel. The second part of this report delves into the criteria and tools used to assess an alternative fuel retail site at the local level. It does this through two case studies of converting former gasoline stations in the Seattle-Eugene area into electric charge stations. The third part of this report addresses steps to be taken after the specific site has been selected. This includes choosing and installing the recharging equipment, which includes steps to take in the permitting process and key players to include.

No perfect tools: trade-offs of sustainability principles and user requirements in designing support tools for land-use decisions between greenfields and brownfields.

Science.gov (United States)

Bartke, Stephan; Schwarze, Reimund

2015-04-15

The EU Soil Thematic Strategy calls for the application of sustainability concepts and methods as part of an integrated policy to prevent soil degradation and to increase the re-use of brownfields. Although certain general principles have been proposed for the evaluation of sustainable development, the practical application of sustainability assessment tools (SATs) is contingent on the actual requirements of tool users, e.g. planners or investors, to pick up such instruments in actual decision making. We examine the normative sustainability principles that need to be taken into account in order to make sound land-use decisions between new development on greenfield sites and the regeneration of brownfields - and relate these principles to empirically observed user requirements and the properties of available SATs. In this way we provide an overview of approaches to sustainability assessment. Three stylized approaches, represented in each case by a typical tool selected from the literature, are presented and contrasted with (1) the norm-oriented Bellagio sustainability principles and (2) the requirements of three different stakeholder groups: decision makers, scientists/experts and representatives of the general public. The paper disentangles some of the inevitable trade-offs involved in seeking to implement sustainable land-use planning, i.e. between norm orientation and holism, broad participation and effective communication. It concludes with the controversial assessment that there are no perfect tools and that to be meaningful the user requirements of decision makers must take precedence over those of other interest groups in the design of SATs. Copyright © 2015 Elsevier Ltd. All rights reserved.

OpenTURNS, an open source uncertainty engineering software

International Nuclear Information System (INIS)

Popelin, A.L.; Dufoy, A.

2013-01-01

The needs to assess robust performances for complex systems have lead to the emergence of a new industrial simulation challenge: to take into account uncertainties when dealing with complex numerical simulation frameworks. EDF has taken part in the development of an Open Source software platform dedicated to uncertainty propagation by probabilistic methods, named OpenTURNS for Open source Treatment of Uncertainty, Risk and Statistics. OpenTURNS includes a large variety of qualified algorithms in order to manage uncertainties in industrial studies, from the uncertainty quantification step (with possibilities to model stochastic dependence thanks to the copula theory and stochastic processes), to the uncertainty propagation step (with some innovative simulation algorithms as the ziggurat method for normal variables) and the sensitivity analysis one (with some sensitivity index based on the evaluation of means conditioned to the realization of a particular event). It also enables to build some response surfaces that can include the stochastic modeling (with the chaos polynomial method for example). Generic wrappers to link OpenTURNS to the modeling software are proposed. At last, OpenTURNS is largely documented to provide rules to help use and contribution

美国环保署棕地计划——合作共赢%The EPA Brownfields Program in the United States: Partnering for Success

Institute of Scientific and Technical Information of China (English)

弗兰克·加德纳; 崔晓培

2017-01-01

Successful revitalization of brownfields typically requires a high degree of partnership and collaboration among government agencies,non-governmental organizations (NGOs),and private sector developers.Since its inception,EPA's Brownfields Program has grown into a proven,results-oriented program that has changed the way contaminated property is perceived,addressed,and managed.In addition to improved public health and environmental quality,benefits include new housing,businesses,public facilities,and parks and the creation of new jobs.The program continues to look to the future by forming new partnerships and constantly exploring creative new ways to help revitalize communities throughout the United States.By presenting a case study from Connecticut,the author illustrates how a sense of partnership and cooperation between various levels of government,the private sector,and non-governmental organizations is an important factor in the successful cleanup and redevelopment ofbrownfields.%成功的棕地再生通常需要政府部门、非政府机构(NGOS)和开发商之间高度的协作.至今,美国环保署的棕地计划已经发展为一个成熟的、以结果为导向的计划.这个计划改变了公众怎么去看待、定位和管理污染土地的方式.此外,除了改善公共健康和环境质量,棕地振兴还给新的居民建筑、商业、公共设施、公园,以及新的工作提供了更多可能性.美国环保署的棕地计划,在形成新的合伙人关系和持续探索创新方法振兴全美社区的过程中不断展望未来.通过介绍康涅狄格州的案例研究,说明各级政府、私营部门和非政府组织间的合作与协作意识是棕地清理和再开发成功的重要因素.

Helpful Entry Level Skills Checklist--Revised Manual [and] Helpful Entry Level Skill Checklist--Revised Edition.

Science.gov (United States)

Child Development Centers of the Bluegrass, Lexington, KY.

The Helpful Entry Level Skills Checklist was designed to assist preschool teachers in selecting functional skills that children (including children with disabilities) may need to make a successful transition into the public schools. These skills, for the most part, deal with attending, compliance, ability to follow directions, turn taking, ability…

Arsenic mobility in brownfield soils amended with green waste compost or biochar and planted with Miscanthus

International Nuclear Information System (INIS)

Hartley, William; Dickinson, Nicholas M.; Riby, Philip; Lepp, Nicholas W.

2009-01-01

Degraded land that is historically contaminated from different sources of industrial waste provides an opportunity for conversion to bioenergy fuel production and also to increase sequestration of carbon in soil through organic amendments. In pot experiments, As mobility was investigated in three different brownfield soils amended with green waste compost (GWC, 30% v/v) or biochar (BC, 20% v/v), planted with Miscanthus. Using GWC improved crop yield but had little effect on foliar As uptake, although the proportion of As transferred from roots to foliage differed considerably between the three soils. It also increased dissolved carbon concentrations in soil pore water that influenced Fe and As mobility. Effects of BC were less pronounced, but the impacts of both amendments on SOC, Fe, P and pH are likely to be critical in the context of As leaching to ground water. Growing Miscanthus had no measurable effect on As mobility. - Green waste compost enhances water-soluble iron, phosphorus and carbon, increasing arsenic mobility in soil pore water.

Brownfield Action: An education through an environmental science simulation experience for undergraduates

Science.gov (United States)

Kelsey, Ryan Daniel

Brownfield Action is a computer simulation experience used by undergraduates in an Introduction to Environmental Science course for non-science majors at Barnard College. Students play the role of environmental consultants given the semester-long task of investigating a potentially contaminated landsite in a simulated town. The simulation serves as the integration mechanism for the entire course. The project is a collaboration between Professor Bower and the Columbia University Center for New Media Teaching and Learning (CCNMTL). This study chronicles the discovery, design, development, implementation, and evaluation of this project over its four-year history from prototype to full-fledged semester-long integrated lecture and lab experience. The complete project history serves as a model for the development of best practices in contributing to the field of educational technology in higher education through the study of fully designed and implemented projects in real classrooms. Recommendations from the project focus on linking the laboratory and lecture portions of a course, the use of simulations (especially for novice students), instructor adaptation to the use of technology, general educational technology project development, and design research, among others. Findings from the study also emphasize the uniqueness of individual student's growth through the experience, and the depth of understanding that can be gained from embracing the complexity of studying sophisticated learning environments in real classrooms.

Using support vector machine to predict beta- and gamma-turns in proteins.

Science.gov (United States)

Hu, Xiuzhen; Li, Qianzhong

2008-09-01

By using the composite vector with increment of diversity, position conservation scoring function, and predictive secondary structures to express the information of sequence, a support vector machine (SVM) algorithm for predicting beta- and gamma-turns in the proteins is proposed. The 426 and 320 nonhomologous protein chains described by Guruprasad and Rajkumar (Guruprasad and Rajkumar J. Biosci 2000, 25,143) are used for training and testing the predictive model of the beta- and gamma-turns, respectively. The overall prediction accuracy and the Matthews correlation coefficient in 7-fold cross-validation are 79.8% and 0.47, respectively, for the beta-turns. The overall prediction accuracy in 5-fold cross-validation is 61.0% for the gamma-turns. These results are significantly higher than the other algorithms in the prediction of beta- and gamma-turns using the same datasets. In addition, the 547 and 823 nonhomologous protein chains described by Fuchs and Alix (Fuchs and Alix Proteins: Struct Funct Bioinform 2005, 59, 828) are used for training and testing the predictive model of the beta- and gamma-turns, and better results are obtained. This algorithm may be helpful to improve the performance of protein turns' prediction. To ensure the ability of the SVM method to correctly classify beta-turn and non-beta-turn (gamma-turn and non-gamma-turn), the receiver operating characteristic threshold independent measure curves are provided. (c) 2008 Wiley Periodicals, Inc.

Are Mentor Relationships Helping Organizations? An Exploration of Developing Mentee-Mentor-Organizational Identifications Using Turning Point Analysis.

Science.gov (United States)

Bullis, Connie; Bach, Betsy Wackernagel

1989-01-01

Examines developing mentor relationships and the association between mentor relationships and individual-organizational relationships. Indicates that many turning points occur later than proposed in broad-phase models of mentor relationship development. Finds that mentor relationships should not be assumed to benefit organizations. (SR)

Modeling of residual stress state in turning of 304L

International Nuclear Information System (INIS)

Valiorgue, F.; Rech, J.; Bergheau, J.M.

2010-01-01

Research presented in this paper aims to link machining parameters to residual stress state and helps understanding mechanisms responsible of machined surface properties modifications. The first presented works are based on an experimental campaign. They reproduce the finishing turning operation of 304L and allow observing the residual stress state evolution at the work piece surface and for an affected depth of 0.2 mm for such processes. Then, the finishing turning operation is simulated numerically in order to realize the same sensitivity study to cutting parameters. This simulation is based on an hybrid approach mixing experimental data and numerical simulation. This method allows getting round the classical difficulties of turning simulation by applying equivalent thermo mechanical loadings onto the work piece surface without modeling the material separation phenomena. Moreover the numerical model uses an hardening law taking into account dynamic recrystallization phenomena. (authors)

SNS 2.1K Cold Box Turn-down Studies

International Nuclear Information System (INIS)

F. Casagrande; P.A. Gurd; D.R. Hatfield; M.P. Howell; W.H. Strong; D. Arenius; J. Creel; V. Ganni; P. Knudsen

2006-01-01

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory is nearing completion. The cold section of the Linac consists of 81 superconducting radio frequency cavities cooled to 2.1K by a 2400 watt cryogenic refrigeration system. The 2.1K cold box consists of four stages of centrifugal compressors with LN2-cooled variable speed electric motors and magnetic bearings. The cryogenic system successfully supported the Linac beam commissioning at both 4.2K and 2.1K and has been fully operational since June 2005. This paper describes the control principles utilized and the experimental results obtained for the SNS cold compressors turn-down capability to about 30% of the design flow, and possible limitation of the frequency dependent power factor of the cold compressor electric motors, which was measured for the first time during commissioning. These results helped to support the operation of the Linac over a very broad and stable cold compressor operating flow range (refrigeration capacity) and pressure. This in turn helped to optimize the cryogenic system operating parameters, minimizing the utilities and improving the system reliability and availability

The Translator's Turn: in the Cultural Turn

Institute of Scientific and Technical Information of China (English)

徐玮玮

2003-01-01

@@ Introduction: Douglas Robinson rose to the defense of the " atheoretical" American literary translator in The Translator's Turn (1991). Here, I borrowed the title from him, but I will write my paper in the thought of the translator's role in translating. In his book, Robinson argued that the literary translator embodies an integration of feeling and thought, of intuition and systematization. In analyzing the " turn" that the translator take from the source text to the target text, Robinson offered a " dialogical" model, that is the translator's dialogical engagement with the source language and with the ethic of the target language. Robinson allows for the translator to intervene, subvert, divert, even entertain, emphasizing the creative aspect of literary translation. The translation linguists, scientists, and philosophers have had their chance at translation theory; now it is time, he argued, for the literary translators to have their " turn".

Use of brownfield trust for revitalising a petrochemical industry and a large contaminated site in the city of Montreal

Energy Technology Data Exchange (ETDEWEB)

Beaulieu, M. [Quebec Ministry of the Environment (Canada)

2003-07-01

One part, a 210 000 m{sup 2} property including the former refinery, was sold to Kemtech Petrochemical Corporation Inc. (Kemtech). Instead of resuming Gulf activities, refining petroleum hydrocarbons, Kemtech modified the plant to produce para-xylene from naphta. To accomplish that, Kemtech was financially backed by diverse banks and by the Quebec Government. By1991, Kemtech financial situation had seriously deteriorated. The company finally went out of business, leaving behind the property, the plant and the workers. A preliminary assessment pictured a site in a poor condition, with not only a lot of abandoned surface waste and equipment waiting to be manage but also heavily contaminated soil and groundwater. The limited data suggested that if could cost as much as 100 million dollar Can. to restore the site. When this became known, the potential buyers vanished, as well as all the Kemtech preferential creditors which preferred to renounce any claim on this piece of property (and the recovery of their loans) instead of facing the risk to have to cleanup the site. The government, as one of the lender, was left alone to face the problem. If the property could not be sold, the Quebec would end up not only burying a once profitable economic activity but also having the responsibility to secure the site and address its contamination. Facing losses on all side, Quebec looked for an original solution. This solution consisted in creating a Brownfield Trust. Through that mechanism, the Quebec government was able to attract an investor to restart the Kemtech plant, create 250 jobs, realise a soil and groundwater assessment, clean up surface waste, elaborate and apply a program allowing the recovery of contaminated groundwater and start the contaminated soil clean up. Moreover, two other related industries were build later on or close to the Kemtech site, bringing to the area 750 millions Can. dollars investment. The conference will explain what was done at the Kemtech site

Why humans might help strangers

Directory of Open Access Journals (Sweden)

Nichola Jayne Raihani

2015-02-01

Full Text Available Humans regularly help strangers, even when interactions are apparently unobserved and unlikely to be repeated. Such situations have been simulated in the laboratory using anonymous one-shot games (e.g. prisoner's dilemma where the payoff matrices used make helping biologically altruistic. As in real-life, participants often cooperate in the lab in these one-shot games with non-relatives, despite that fact that helping is under negative selection under these circumstances. Two broad explanations for such behavior prevail. The 'big mistake' or 'mismatch' theorists argue that behavior is constrained by psychological mechanisms that evolved predominantly in the context of repeated interactions with known individuals. In contrast, the cultural group selection theorists posit that humans have been selected to cooperate in anonymous one-shot interactions due to strong between-group competition, which creates interdependence among in-group members. We present these two hypotheses before discussing alternative routes by which humans could increase their direct fitness by cooperating with strangers under natural conditions. In doing so, we explain why the standard lab games do not capture real-life in various important aspects. First, asymmetries in the cost of perceptual errors regarding the context of the interaction (one-shot versus repeated; anonymous versus public might have selected for strategies that minimize the chance of making costly behavioral errors. Second, helping strangers might be a successful strategy for identifying other cooperative individuals in the population, where partner choice can turn strangers into interaction partners. Third, in many real-world situations individuals are able to parcel investments such that a one-shot interaction is turned into a repeated game of many decisions. Finally, in contrast to the assumptions of the prisoner's dilemma model, it is possible that benefits of cooperation follow a non-linear function of

Lattice modeling and calibration with turn-by-turn orbit data

Directory of Open Access Journals (Sweden)

Xiaobiao Huang

2010-11-01

Full Text Available A new method that explores turn-by-turn beam position monitor (BPM data to calibrate lattice models of accelerators is proposed. The turn-by-turn phase space coordinates at one location of the ring are first established using data from two BPMs separated by a simple section with a known transfer matrix, such as a drift space. The phase space coordinates are then tracked with the model to predict positions at other BPMs, which can be compared to measurements. The model is adjusted to minimize the difference between the measured and predicted orbit data. BPM gains and rolls are included as fitting variables. This technique can be applied to either the entire or a section of the ring. We have tested the method experimentally on a part of the SPEAR3 ring.

Lattice modeling and calibration with turn-by-turn orbit data

Science.gov (United States)

Huang, Xiaobiao; Sebek, Jim; Martin, Don

2010-11-01

A new method that explores turn-by-turn beam position monitor (BPM) data to calibrate lattice models of accelerators is proposed. The turn-by-turn phase space coordinates at one location of the ring are first established using data from two BPMs separated by a simple section with a known transfer matrix, such as a drift space. The phase space coordinates are then tracked with the model to predict positions at other BPMs, which can be compared to measurements. The model is adjusted to minimize the difference between the measured and predicted orbit data. BPM gains and rolls are included as fitting variables. This technique can be applied to either the entire or a section of the ring. We have tested the method experimentally on a part of the SPEAR3 ring.

Turning a page of Agency history

Energy Technology Data Exchange (ETDEWEB)

NONE

1969-07-01

Recent developments, and especially the new and critical interest of developing countries, have helped to mark the turning of a page in the Agency's history. If the present situation in the economics of nuclear power does not change there is a danger that developing countries will lag further and further behind the advanced countries in its use. Shortage of resources impose a brake on Agency efforts to promote benefits of nuclear techniques, especially by technical assistance. These were some of the points made by Dr. Sigvard Eklund, the Director General, when he presented the Agency's annual report to the Economic and Social Council (ECOSOC) in July. (author)

Biomechanical Evaluation of a Bed Feature to Assist in Turning and Laterally Repositioning Patients.

Science.gov (United States)

Wiggermann, Neal

2016-08-01

This study investigated the effects of hospital bed features on the biomechanical stresses experienced by nurses when turning and laterally repositioning patients. Turn Assist, a common feature in ICU beds that helps to rotate patients, and side rail orientation were evaluated. Manual patient handling is a risk factor for musculoskeletal injury, and turning patients is one of the most common patient handling activities. No known studies have evaluated bed attributes such as the Turn Assist feature and side rail orientation that may affect the stresses experienced by the nurse. Nine female nurses laterally repositioned and turned a 63-kg and 123-kg subject on an ICU bed while motion capture, ground reaction forces, and hand force data were recorded. Loading of the spine and shoulder was modeled using 3D Static Strength Prediction Program (3DSSPP). Spine compression and shear forces did not exceed recommended limits when turning or laterally repositioning. However, the mean pull forces required to manually laterally reposition even the 63-kg subject was 340 Newtons, more than 50% greater than limits established in psychophysical testing. Turn Assist considerably reduced spine loading and pull forces for both turning and laterally repositioning. Lowering side rails reduced spinal compression by 11% when turning patients. Laterally repositioning patients as part of turning may pose an injury risk to caregivers. Turn Assist reduces physical loading on nurses when turning and repositioning patients. Caregivers should consider using Turn Assist and other aids such as mechanical lifts or sliding sheets especially when turning patients requires lateral repositioning. © 2015, Human Factors and Ergonomics Society.

"Depression Can Disguise Itself…" —But There Is Help

Science.gov (United States)

... of this page please turn Javascript on. Feature: Depression "Depression Can Disguise Itself…" —But There Is Help Past ... 20 million Americans. What are the signs of depression? Sadness or inability to enjoy things are hallmarks ...

Mimicry by asx- and ST-turns of the four main types of beta-turn in proteins.

Science.gov (United States)

Duddy, William J; Nissink, J Willem M; Allen, Frank H; Milner-White, E James

2004-11-01

Hydrogen-bonded beta-turns in proteins occur in four categories: type I (the most common), type II, type II', and type I'. Asx-turns resemble beta-turns, in that both have an NH. . .OC hydrogen bond forming a ring of 10 atoms. Serine and threonine side chains also commonly form hydrogen-bonded turns, here called ST-turns. Asx-turns and ST-turns can be categorized into four classes, based on side chain rotamers and the conformation of the central turn residue, which are geometrically equivalent to the four types of beta-turns. We propose asx- and ST-turns be named using the type I, II, I', and II' beta-turn nomenclature. Using this, the frequency of occurrence of both asx- and ST-turns is: type II' > type I > type II > type I', whereas for beta-turns it is type I > type II > type I' > type II'. Almost all type II asx-turns occur as a recently described three residue feature named an asx-nest.

Turning breech babies after 34 weeks: the if, how, & when of turning breech babies.

Science.gov (United States)

Cohain, Judy Slome

2007-01-01

Techniques for turning a term breech baby are 1). External cephalic version (ECV) using hands and ultrasound only; 2). Acupuncture point stimulation, by needle or moxibustion; 3). Chiropractic "Webster" technique; 4). Hypnotherapy; and 5). Special exercises. Fifty % of breech fetuses at 34 weeks will turn by themselves to head down by 38 weeks. Therefore, to be considered effective, a technique for turning breech must turn the baby and keep it turned more than 50% of the time. Only ECV with an experienced practitioner has been documented to have a greater than 50% success rate at 37 weeks; in 95% of cases the head stays down. Most women experience the fetus turning by hand as quick but very painful. "Unstable lie" is sometimes used as a baseless excuse for inducing labor after the baby turns from breech to head down. (judyslome@hotmail.com).

How changes in top water bother big turning packs of up-going wet air

Science.gov (United States)

Wood, K.

2017-12-01

Big turning packs of up-going wet air form near areas of warm water at the top of big bodies of water. After these turning packs form, they usually get stronger if the top water stays warm. If the top water becomes less warm, the turning packs usually get less strong. Other things can change how strong a turning pack gets, like how wet the air around it is and if that air moves faster higher up than lower down. When these turning packs hit land, their rain and winds can hurt people and the stuff they own, especially if the turning pack is really strong. But it's hard to know how much stronger or less strong it will become before it hits land. Warm top water gives a turning pack of up-going wet air a lot of power, but cool top water doesn't, so we need to know how warm the top water is. Because I can't go into every turning pack myself, flying computers in outer space tell me what the top water is doing. I look at the top water near turning packs that get strong and see how it's different from the top water near those that get less strong. Top water that changes from warm to cool in a small area bothers a turning pack of up-going wet air, which then gets less strong. If we see these top water changes ahead of time, that might help us know what a turning pack will do before it gets close to land.

Brownfield Action Online - An Interactive Undergraduate Science Course in Environmental Forensics

Science.gov (United States)

Liddicoat, Joseph; Bower, Peter

2014-05-01

Brownfield Action (BA) is a web-based, interactive, three dimensional digital space and learning simulation in which students form geotechnical consulting companies and work collectively to explore problems in environmental forensics. Created at Barnard College (BC) in conjunction with the Center for New Media Teaching and Learning at Columbia University, BA has a 12-year history at BC of use in one semester of a two-semester Introduction to Environmental Science course that is taken by more than 100 female undergraduate non-science majors to satisfy their science requirement. The pedagogical methods and design of the BA model are grounded in a substantial research literature focused on the design, use, and effectiveness of games and simulation in education. The successful use of the BA simulation at BC and 14 other institutions in the U.S. is described in Bower et al. (2011 and 2014). Soon to be taught online to non-traditional undergraduate students, BA has 15 modules that include a reconnaissance survey; scale; topographic, bedrock, and water table maps; oral and written reports from residents and the municipal government; porosity and permeability measurements of the regolith (sand) in the area of interest; hydrocarbon chemistry; direction and velocity of groundwater flow; and methods of geophysical exploration (soil gas, ground penetrating radar, magnetic metal detection, excavation, and drilling). Student performance is assessed by weekly exercises and a semester ending Environmental Site Assessment Phase I Report that summarizes the individual and collective discoveries about a contaminated subsurface plume that emanates from a leaking underground storage tank at a gasoline station upgrade from the water well that serves the surrounding community. Texts for the course are Jonathan Harr's A Civil Action and Rachel Carson's Silent Spring, which are accompanied by questions that direct the reading.

Determination of linear optics functions from turn-by-turn data

Energy Technology Data Exchange (ETDEWEB)

Alexahin, Y; Gianfelice-Wendt, E, E-mail: alexahin@fnal.gov [Fermi National Accelerator Laboratory, P.O. Box 500, Batavia, Illinois 60510 (United States)

2011-10-15

A method for evaluation of coupled optics functions, detection of strong perturbing elements, determination of BPM calibration errors and tilts using turn-by-turn (TBT) data is presented as well as the new version of the Hamiltonian perturbation theory of betatron oscillations the method is based upon. An example of application of the considered method to the Tevatron is given.

Turn-around improvements

International Nuclear Information System (INIS)

Redaelli, S.; Venturini Delsolaro, W.

2012-01-01

An efficient turn-around will be an important parameter for the integrated luminosity performance at LHC in 2012, when an operation with steady beam parameters and machine configuration will be achieved at the beginning of the run. Improvements of the operational cycle were already put successfully in place after the 2010 experience but additional ways to reduce the time required to setup collisions are possible. In this paper, the 2011 turn-around performance is reviewed and the benefits of the improvements from 2010 are presented. Phases of the operational cycle when further amelioration is possible are discussed and some proposal for a faster turn-around in 2012 are outlined. (authors)

Turns prediction : Turns prediction

OpenAIRE

Fuchs, Patrick; Etchebest, Catherine; De Brevern, Alexandre

2007-01-01

The description of protein 3D structure usually focuses on the repetitive local folds (alpha-helices and beta-sheets). The remaining class, sometimes called unordered region, has often been considered as random (one also calls it ‘random coil'). However, some interesting local folds are also highly recurrent and definitely more structured than a real random region. One of such particularly interesting motif is tight turn; this latter is characterized by few residues (3 to 5) and by the revers...

Turning nuclear communications inside out

International Nuclear Information System (INIS)

Besenyei, Elisabeth; Czibolya, Laszlo

2002-01-01

Due to debates on the security of energy supply in the European Union, the international efforts on the implementation of Kyoto protocol and the forthcoming liberalization of the electrical energy market the attention of Hungarian decision-makers was focused on energy related problems. Discussions started on the future role of nuclear power and anti-nuclear environmentalists became more active in their criticism. Changes were needed in the approach and practice of communication on nuclear energy. Previous practice turned to be inefficient in dialogue with different social and influential groups. Public information could not be considered any more as an activity explaining measures to cope with incidents and accidents or giving technical answers to mostly superficial statements on allegedly unsafe features and solutions in nuclear industry. It was time to change the paradigm and to turn the communication into a powerful tool to put forward the arguments, to show the achievements and facts and to explain the efforts in addressing public concerns. The new paradigm turned the previous outside-in approach to a new inside-out type of behavior. Instead of reacting to the attacks coming from outside the new approach means first of all commitment to be open and pro-active in communication and to act in close cooperation with all interested organizations and institutions. The three pillars of the new paradigm, commitment, communication and co-operation are applicable not only for the nuclear industry, but also for the governmental agencies (regulatory bodies, health and emergency authorities etc.) and for the wide range of technical, scientific and civil organizations. Public information should be turned from a burden to a challenge for open, technically valid and honest dialogue. This active communication approach is illustrated by some new initiatives in public information in Hungary. Following the successful Nuclear Academy for Journalists formed new Section of Nuclear

Research of remote control system in turn by turn timing system

International Nuclear Information System (INIS)

Zhan Zhifeng; Xiao Yanguo; Ma Kui; Yin Zejie; Wu Xiaoyi

2003-01-01

In this paper, we introduce a remote control system which is used in a frequency dividing and time-delay module. This control system is based on client/server architecture, and RS232 serial communication protocol. This control system is used in timing system of NSRL turn by turn beam position monitor

Application of digital lock-in detection to Hefei Light Source turn-by-turn system

International Nuclear Information System (INIS)

Yang Yongliang; Wang Junhua; Sun Baogen; Chen Yuanbo; Zhou Zeran

2010-01-01

This paper introduces the digital lock-in detection theory and discusses its feasibility to obtain the damping rate in turn-by-turn measurement systems. Numerical simulations of this method were carried out with Matlab. Then principle presenting beam experiments were conducted on the Hefei Light Source (HLS) storage ring. The measured beta oscillation growth time is about 0.26 ms and the damping time is about 1.2 ms. Simulation and experimental results show that, the digital lock-in detection method is effective in damping rate measurement in turn-by-turn measurement systems. (authors)

Turned on/turned off

DEFF Research Database (Denmark)

Petersen, Eva Bendix

2016-01-01

position, it attempts to sense into the lived experience of being subject to, and of, turns in social theory. As a whole the paper seeks to work with and allow for multiplicity in tone, focus, researcher positioning, reader positioning, and more, to see what knowledge that does not seek confident closure......Through cacophonic story-telling, emerging from ethnographic observations from academic scenes in Australia and elsewhere, the article seeks to explore the timeliness and untimeliness of feminist knowledge production. Rather than arguing a particular point or making a claim for a particular...

Immediate Effects of Clock-Turn Strategy on the Pattern and Performance of Narrow Turning in Persons With Parkinson Disease.

Science.gov (United States)

Yang, Wen-Chieh; Hsu, Wei-Li; Wu, Ruey-Meei; Lin, Kwan-Hwa

2016-10-01

Turning difficulty is common in people with Parkinson disease (PD). The clock-turn strategy is a cognitive movement strategy to improve turning performance in people with PD despite its effects are unverified. Therefore, this study aimed to investigate the effects of the clock-turn strategy on the pattern of turning steps, turning performance, and freezing of gait during a narrow turning, and how these effects were influenced by concurrent performance of a cognitive task (dual task). Twenty-five people with PD were randomly assigned to the clock-turn or usual-turn group. Participants performed the Timed Up and Go test with and without concurrent cognitive task during the medication OFF period. The clock-turn group performed the Timed Up and Go test using the clock-turn strategy, whereas participants in the usual-turn group performed in their usual manner. Measurements were taken during the 180° turn of the Timed Up and Go test. The pattern of turning steps was evaluated by step time variability and step time asymmetry. Turning performance was evaluated by turning time and number of turning steps. The number and duration of freezing of gait were calculated by video review. The clock-turn group had lower step time variability and step time asymmetry than the usual-turn group. Furthermore, the clock-turn group turned faster with fewer freezing of gait episodes than the usual-turn group. Dual task increased the step time variability and step time asymmetry in both groups but did not affect turning performance and freezing severity. The clock-turn strategy reduces turning time and freezing of gait during turning, probably by lowering step time variability and asymmetry. Dual task compromises the effects of the clock-turn strategy, suggesting a competition for attentional resources.Video Abstract available for more insights from the authors (see Supplemental Digital Content 1, http://links.lww.com/JNPT/A141).

Salt-bridging effects on short amphiphilic helical structure and introducing sequence-based short beta-turn motifs.

Science.gov (United States)

Guarracino, Danielle A; Gentile, Kayla; Grossman, Alec; Li, Evan; Refai, Nader; Mohnot, Joy; King, Daniel

2018-02-01

Determining the minimal sequence necessary to induce protein folding is beneficial in understanding the role of protein-protein interactions in biological systems, as their three-dimensional structures often dictate their activity. Proteins are generally comprised of discrete secondary structures, from α-helices to β-turns and larger β-sheets, each of which is influenced by its primary structure. Manipulating the sequence of short, moderately helical peptides can help elucidate the influences on folding. We created two new scaffolds based on a modestly helical eight-residue peptide, PT3, we previously published. Using circular dichroism (CD) spectroscopy and changing the possible salt-bridging residues to new combinations of Lys, Arg, Glu, and Asp, we found that our most helical improvements came from the Arg-Glu combination, whereas the Lys-Asp was not significantly different from the Lys-Glu of the parent scaffold, PT3. The marked 3 10 -helical contributions in PT3 were lessened in the Arg-Glu-containing peptide with the beginning of cooperative unfolding seen through a thermal denaturation. However, a unique and unexpected signature was seen for the denaturation of the Lys-Asp peptide which could help elucidate the stages of folding between the 3 10 and α-helix. In addition, we developed a short six-residue peptide with β-turn/sheet CD signature, again to help study minimal sequences needed for folding. Overall, the results indicate that improvements made to short peptide scaffolds by fine-tuning the salt-bridging residues can enhance scaffold structure. Likewise, with the results from the new, short β-turn motif, these can help impact future peptidomimetic designs in creating biologically useful, short, structured β-sheet-forming peptides.

Predictors and use of nonpharmacologic interventions for procedural pain associated with turning among hospitalized adults.

Science.gov (United States)

Faigeles, Bonnie; Howie-Esquivel, Jill; Miaskowski, Christine; Stanik-Hutt, Julie; Thompson, Carol; White, Cheri; Wild, Lorie Rietman; Puntillo, Kathleen

2013-06-01

Many hospitalized adults cannot reposition themselves in their beds. Therefore, they are regularly turned by their nurses, primarily to prevent pressure ulcer formation. Earlier research indicates that turning is painful and that patients are rarely premedicated with analgesics. Nonpharmacologic interventions may be used to help with this painful procedure. However, no published research was found on the use of nonpharmacologic interventions for turning of hospitalized patients. The objectives of this study were: 1) to describe patient pain characteristics during turning and their association with patient demographic and clinical characteristics; 2) to determine the frequency of use of various nonpharmacologic interventions for hospitalized adult patients undergoing the painful procedure of turning; and 3) to identify factors that predict the use of specific nonpharmacologic interventions for pain associated with turning. Hospitalized adult patients who experienced turning, the nurses caring for them, and others who were present at the time of turning were asked if they used various nonpharmacologic interventions to manage pain during the turning. Out of 1,395 patients, 92.5% received at least one nonpharmacologic intervention. Most frequently used were calming voice (65.7%), information (60.6%), and deep breathing (37.9%). Critical-care patients were more likely to receive a calming voice (odds ratio [OR] 1.66, p patients. Those reporting higher pain were consistently more likely to receive each of the three interventions (OR 1.01, p turning procedure. The specific interventions used most often are ones that can be initiated spontaneously. Our data suggest that patients, nurses, and family members respond to patients' turning-related pain by using nonpharmacologic interventions. Copyright © 2013 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

Pilot study: Assessing the effect of continual position monitoring technology on compliance with patient turning protocols.

Science.gov (United States)

Schutt, Suann Cirigliano; Tarver, Christine; Pezzani, Michelle

2018-01-01

The study aim was to evaluate if continual patient position monitoring, taking into account self-turns and clinician-assisted turns, would increase the percentage of time a patient's position changed at least every 2 hr. While patient turning has clinical benefits, current models to help staff remember to turn patients, such as "turn clocks" and timers, have not resulted in high compliance with turning protocols. In addition, reminders are based on arbitrary 2-hr windows (such as turning on "even" hours) rather than on individual patient activity, including self-turns. This is a first inpatient, non-randomized, pre-/postintervention study. Data collection occurred from May 2013-February 2014 on a 39-bed medical unit in a community hospital. Baseline patient turning data were recorded by a sensor; however, the patient data were not displayed at the nurses' station to establish compliance with the hospital's turning protocol. Postintervention, patient position information was wirelessly displayed on nurses' station computer monitors in real time. A Student t test was used to compare baseline to postintervention "mean time in compliance." Data from 138 patients ( N  =   7,854 hr of monitoring) were collected. The baseline phase yielded 4,322 hr of position monitoring data and the postintervention phase yielded 3,532 hr of data. Statistically significant improvement was demonstrated in the percentage of time a patient's position changed at least every 2 hr from baseline to postintervention.

Turning Schools Inside Out: Connecting Schools and Communities through Public Arts and Literacies

Science.gov (United States)

Charest, Brian C.; Bell, Lauren D.; Gonzalez, Marialuisa; Parker, Veronica L.

2014-01-01

In this paper we tell a story about how we partnered with a Chicago high school in order to turn the school inside out by displaying larger-than-life teacher portraits and statements at street level throughout the community. This paper explores how public art and activism can help teachers and students develop notions of civic literacy and…

Infrared thermography based diagnosis of inter-turn fault and cooling system failure in three phase induction motor

Science.gov (United States)

Singh, Gurmeet; Naikan, V. N. A.

2017-12-01

Thermography has been widely used as a technique for anomaly detection in induction motors. International Electrical Testing Association (NETA) proposed guidelines for thermographic inspection of electrical systems and rotating equipment. These guidelines help in anomaly detection and estimating its severity. However, it focus only on location of hotspot rather than diagnosing the fault. This paper addresses two such faults i.e. inter-turn fault and failure of cooling system, where both results in increase of stator temperature. Present paper proposes two thermal profile indicators using thermal analysis of IRT images. These indicators are in compliance with NETA standard. These indicators help in correctly diagnosing inter-turn fault and failure of cooling system. The work has been experimentally validated for healthy and with seeded faults scenarios of induction motors.

Turn-by-Turn and Bunch-by-Bunch Transverse Profiles of a Single Bunch in a Full Ring

International Nuclear Information System (INIS)

Kraus, R.; Fisher, A.S.

2005-01-01

The apparatus described in this paper can image the evolution of the transverse profile of a single bunch, isolated from a full PEP-II ring of 1500 bunches. Using this apparatus there are two methods of single bunch imaging; bunch-by-bunch beam profiling can image every bunch in the ring a single bunch at a time with the images of sequential bunches being in order, allowing one to see variations in beam size along a train. Turn-by-turn beam profiling images a single bunch on each successive turn it makes around the ring. This method will be useful in determining the effect that an injected bunch has on a stable bunch as the oscillations of the injected bunch damp out. Turn-by-turn imaging of the synchrotron light uses a system of lenses and mirrors to image many turns of both the major and minor axis of a single bunch across the photocathode of a gateable camera. The bunch-by-bunch method is simpler: because of a focusing mirror used in porting the light from the ring, the synchrotron light from the orbiting electrons becomes an image at a certain distance from the mirror; and since the camera does not use a lens, the photocathode is set exactly at this image distance. Bunch-by-bunch profiling has shown that in the Low Energy Ring (LER) horizontal bunch size decreases along a train. Turn-by-turn profiling has been able to image 100 turns of a single bunch on one exposure of the camera. The turn-by-turn setup has also been able to image 50 turns of the minor axis showing part of the damping process of an oscillating injected charge during a LER fill. The goal is to image the damping of oscillations of injected charge for 100 turns of both the major and minor axis throughout the damping process during trickle injection. With some changes to the apparatus this goal is within reach and will make turn-by-turn imaging a very useful tool in beam diagnostics

Study on the machinability characteristics of superalloy Inconel 718 during high speed turning

International Nuclear Information System (INIS)

Thakur, D.G.; Ramamoorthy, B.; Vijayaraghavan, L.

2009-01-01

The present paper is an attempt of an experimental investigation on the machinability of superalloy, Inconel 718 during high speed turning using tungsten carbide insert (K20) tool. The effect of machining parameters on the cutting force, specific cutting pressure, cutting temperature, tool wear and surface finish criteria were investigated during the experimentation. The machining parameters have been optimized by measuring forces. The effect of machining parameters on the tool wear was examined through SEM micrographs. During high speed turning acoustic emission signal were collected and analyzed to understand the effect of cutting parameters during online. The research work findings will also provide useful economic machining solution by utilizing economical tungsten carbide tooling during high speed processing of Inconel 718, which is otherwise usually machined by costly PCD or CBN tools. The present approach and results will be helpful for understanding the machinability of Inconel 718 during high speed turning for the manufacturing engineers

Help-Seeking on Facebook Versus More Traditional Sources of Help: Cross-Sectional Survey of Military Veterans.

Science.gov (United States)

Teo, Alan R; Marsh, Heather E; Liebow, Samuel B L; Chen, Jason I; Forsberg, Christopher W; Nicolaidis, Christina; Saha, Somnath; Dobscha, Steven K

2018-02-26

The media has devoted significant attention to anecdotes of individuals who post messages on Facebook prior to suicide. However, it is unclear to what extent social media is perceived as a source of help or how it compares to other sources of potential support for mental health problems. This study aimed to evaluate the degree to which military veterans with depression use social media for help-seeking in comparison to other more traditional sources of help. Cross-sectional self-report survey of 270 adult military veterans with probable major depression. Help-seeking intentions were measured with a modified General Help-Seeking Questionnaire. Facebook users and nonusers were compared via t tests, Chi-square, and mixed effects regression models. Associations between types of help-seeking were examined using mixed effects models. The majority of participants were users of social media, primarily Facebook (n=162). Mean overall help-seeking intentions were similar between Facebook users and nonusers, even after adjustment for potential confounders. Facebook users were very unlikely to turn to Facebook as a venue for support when experiencing either emotional problems or suicidal thoughts. Compared to help-seeking intentions for Facebook, help-seeking intentions for formal (eg, psychologists), informal (eg, friends), or phone helpline sources of support were significantly higher. Results did not substantially change when examining users of other social media, women, or younger adults. In its current form, the social media platform Facebook is not seen as a venue to seek help for emotional problems or suicidality among veterans with major depression in the United States. ©Alan R Teo, Heather E Marsh, Samuel B L Liebow, Jason I Chen, Christopher W Forsberg, Christina Nicolaidis, Somnath Saha, Steven K Dobscha. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 26.02.2018.

Helping organizations help others: organization development as a facilitator of social change.

Science.gov (United States)

Boyd, Neil M

2011-01-01

This article explores organization development (OD) interventions and their likelihood of increasing social change outcomes in public agencies. The central argument of this work is that public and nonprofit organizations can deliver better social outcomes by systematically engaging in OD interventions. An in-depth survey was conducted in 3 agencies of the Commonwealth of Pennsylvania at the end of the gubernatorial administration of Tom Ridge (1995-2002). During his administration, Governor Ridge led the agencies of Pennsylvania government through a large-scale change effort to improve the efficiency and effectiveness of service delivery to the citizens of the Commonwealth of Pennsylvania. The change effort was a remarkable event for the Commonwealth because no other governor in the history of the state had attempted to conceptualize and deliver a comprehensive large-scale change management initiative. The successes and setbacks served as a fertile context to shed light on the following research question: Do OD interventions increase the likelihood that public organizations will deliver better social outcomes? This question is important in that public organizations may need to engage in organization development activities to improve their internal operations, which in turn may help them provide exemplary social outcomes to those whom they serve. In short, organization development interventions might allow public organizations to help themselves to help others.

Comprehensive waste characterization and organic pollution co-occurrence in a Hg and As mining and metallurgy brownfield.

Science.gov (United States)

Gallego, J R; Esquinas, N; Rodríguez-Valdés, E; Menéndez-Aguado, J M; Sierra, C

2015-12-30

The abandonment of Hg-As mining and metallurgy sites, together with long-term weathering, can dramatically degrade the environment. In this work it is exemplified the complex legacy of contamination that afflicts Hg-As brownfields through the detailed study of a paradigmatic site. Firstly, an in-depth study of the former industrial process was performed to identify sources of different types of waste. Subsequently, the composition and reactivity of As- and Hg-rich wastes (calcines, As-rich soot, stupp, and flue dust) was analyzed by means of multielemental analysis, mineralogical characterization (X-ray diffraction, electronic, and optical microscopy, microbrobe), chemical speciation, and sequential extractions. As-rich soot in the form of arsenolite, a relatively mobile by-product of the pyrometallurgical process, and stupp, a residue originated in the former condensing system, were determined to be the main risk at the site. In addition, the screening of organic pollution was also aimed, as shown by the outcome of benzo(a) pyrene and other PAHs, and by the identification of unexpected Hg organo-compounds (phenylmercury propionate). The approach followed unravels evidence from waste from the mining and metallurgy industry that may be present in other similar sites, and identifies unexpected contaminants overlooked by conventional analyses. Copyright © 2015 Elsevier B.V. All rights reserved.

Beam Optics Measurements Through Turn by Turn Beam Position Data in the SLS

CERN Document Server

Zisopoulos, P; Streun, A; Ziemann, v

2013-01-01

Refined Fourier analysis of turn-by-turn (TBT) transverse position data measurements can be used for determining several beam properties of a ring, such as transverse tunes, optics functions, phases, chromatic properties and coupling. In particular, the Numerical Analysis of Fundamental Frequencies (NAFF) algorithm is used to analyse TBT data from the Swiss Light Source (SLS) storage ring in order to estimate on and off-momentum beam characteristics. Of particular interest is the potential of using the full position information within one turn in order to measure beam optics properties.

Realistic page-turning of electronic books

Science.gov (United States)

Fan, Chaoran; Li, Haisheng; Bai, Yannan

2014-01-01

The booming electronic books (e-books), as an extension to the paper book, are popular with readers. Recently, many efforts are put into the realistic page-turning simulation o f e-book to improve its reading experience. This paper presents a new 3D page-turning simulation approach, which employs piecewise time-dependent cylindrical surfaces to describe the turning page and constructs smooth transition method between time-dependent cylinders. The page-turning animation is produced by sequentially mapping the turning page into the cylinders with different radii and positions. Compared to the previous approaches, our method is able to imitate various effects efficiently and obtains more natural animation of turning page.

Hummingbirds control turning velocity using body orientation and turning radius using asymmetrical wingbeat kinematics.

Science.gov (United States)

Read, Tyson J G; Segre, Paolo S; Middleton, Kevin M; Altshuler, Douglas L

2016-03-01

Turning in flight requires reorientation of force, which birds, bats and insects accomplish either by shifting body position and total force in concert or by using left-right asymmetries in wingbeat kinematics. Although both mechanisms have been observed in multiple species, it is currently unknown how each is used to control changes in trajectory. We addressed this problem by measuring body and wingbeat kinematics as hummingbirds tracked a revolving feeder, and estimating aerodynamic forces using a quasi-steady model. During arcing turns, hummingbirds symmetrically banked the stroke plane of both wings, and the body, into turns, supporting a body-dependent mechanism. However, several wingbeat asymmetries were present during turning, including a higher and flatter outer wingtip path and a lower more deviated inner wingtip path. A quasi-steady analysis of arcing turns performed with different trajectories revealed that changes in radius were associated with asymmetrical kinematics and forces, and changes in velocity were associated with symmetrical kinematics and forces. Collectively, our results indicate that both body-dependent and -independent force orientation mechanisms are available to hummingbirds, and that these kinematic strategies are used to meet the separate aerodynamic challenges posed by changes in velocity and turning radius. © 2016 The Author(s).

Learning turning points--in life with long-term illness--visualized with the help of the life-world philosophy.

Science.gov (United States)

Berglund, Mia M U

2014-01-01

A long-term illness is an occurrence that changes one's life and generates a need to learn how to live with it. This article is based on an empirical study of interviews on people living with different long-term illnesses. The results have shown that the learning process is a complex phenomenon interwoven with life as a whole. The essential meaning of learning to live with long-term illness concerns a movement toward a change of understanding of access to the world. In this movement, in which everyday lives as well as relationships with oneself and others are affected, a continual renegotiation is needed. Texts from existential/lifeworld philosopher, Heidegger and Gadamer, have been used to get a greater understanding of the empirical results. These texts have been analysed with particular focus on learning turning points and the importance of reflection. The results are highlighted under the following themes: Pursuit of balance-the aim of learning, The tense grip-the resistance to learning, To live more really-the possibilities of the learning, Distancing-the how of the learning, and The tense of the learning-the whole of the learning. In those learning turning points are present. Knowledge from this study has been used to make a didactic model designed to give caregivers a tool to support patients' learning. The didactic model is called: The challenge to take charge of life with a long-term illness.

CONNECTION OF TURN AHEAD AND TURN BACK WITH MOTORIC ABILITIES OF THE FIFTH GRADE STUDENTS

Directory of Open Access Journals (Sweden)

Jovica Petković

2006-06-01

Full Text Available The research is done for the purpose of determination and defining of the level of connection between some motoric abilities with success in realization of programmed contents from the area of gymnastics (turn ahead and turn back. The research is done on the sample of fifty one students from the fifth grade of Elementary School, on ten motoric tests and on two specific motoric assignments – turn ahead and turn back. The results of this research clearly point that there exist the multitude of statistically important coefficients of correlation between treated motoric abilities and applied motoric assignments.

The embodied turn in research on language and social interaction

DEFF Research Database (Denmark)

Nevile, Maurice

2015-01-01

I use the term the embodied turn to mean the point when interest in the body became established among researchers on language and social interaction, exploiting the greater ease of video-recording. This review paper tracks the growth of "embodiment" in over 400 papers published in Research...... on Language and Social Interaction from 1987-2013. I consider closely two areas where analysts have confronted challenges, and how they have responded: settling on precise and analytically helpful terminology for the body; and transcribing and representing the body, particularly its temporality and manner....

CERN PS Optical Properties Measured with Turn-By-Turn Orbit Data

CERN Document Server

Bach, T; Giovannozzi, M; Hernalsteens, C; Lachaize, A; Sterbini, G; Tom´as, R; Wasef, R

2013-01-01

The performance of the CERN Proton Synchrotron (PS) has been constantly increasing over the years both in terms of beam parameters (intensity and brightness) and beam manipulations (transverse and longitudinal splitting). This implies a very good knowledge of the linear and non-linear model of the ring. In this paper we report on a detailed campaign of beam measurements based on turn-by-turn orbit data aimed at measuring the optics in several conditions as well as the resonance driving terms.

Safety effects of traffic signing for left turn flashing yellow arrow signals.

Science.gov (United States)

Schattler, Kerrie L; Gulla, Cody J; Wallenfang, Travis J; Burdett, Beau A; Lund, Jessica A

2015-02-01

In 2010, the left turn flashing yellow arrow (FYA) signal displays were installed at signalized intersections on state routes in the Peoria, Illinois, area. Supplemental traffic signs with text "Left Turn Yield on Flashing Yellow Arrow" were mounted on the mast arm adjacent to the left turn signal at over half of the FYA installations. The purpose of this paper is to present the results of the effectiveness evaluation of the FYA supplemental sign on safety. Analyses are presented on the effects of the FYA supplemental sign for all drivers and a subset of drivers age 65 and older. A crash-based comparison of 164 FYA approaches including 90 approaches with the sign and 74 approaches without the sign showed greater crash reductions when the supplemental FYA sign was present. The results also showed that crashes involving drivers age 65 and older did not experience the same magnitudes of crash reductions as compared to all drivers. The findings of this research indicate that supplemental FYA signs may help in improving safety for left-turning vehicles during the permissive interval. Thus, it is recommended that supplemental signs be used when initially implementing the FYA, and that effort to educate the driving public on new traffic control be made to further improve safety at signalized intersections. Copyright © 2014. Published by Elsevier Ltd.

Sandstone Turning by Abrasive Waterjet

Czech Academy of Sciences Publication Activity Database

Hlaváček, Petr; Cárach, J.; Hloch, Sergej; Vasilko, K.; Klichová, Dagmar; Klich, Jiří; Lehocká, D.

2015-01-01

Roč. 48, č. 6 (2015), s. 2489-2493 ISSN 0723-2632 R&D Projects: GA MŠk ED2.1.00/03.0082; GA MŠk(CZ) LO1406 Institutional support: RVO:68145535 Keywords : turning away from the jet * conventional turning towards the jet * sandstone * abrasive water jet Subject RIV: JQ - Machines ; Tools Impact factor: 2.386, year: 2015 http://www.springerprofessional.de/sandstone-turning-by-abrasive-waterjet/6038028.html

NetTurnP--neural network prediction of beta-turns by use of evolutionary information and predicted protein sequence features.

Directory of Open Access Journals (Sweden)

Bent Petersen

Full Text Available UNLABELLED: β-turns are the most common type of non-repetitive structures, and constitute on average 25% of the amino acids in proteins. The formation of β-turns plays an important role in protein folding, protein stability and molecular recognition processes. In this work we present the neural network method NetTurnP, for prediction of two-class β-turns and prediction of the individual β-turn types, by use of evolutionary information and predicted protein sequence features. It has been evaluated against a commonly used dataset BT426, and achieves a Matthews correlation coefficient of 0.50, which is the highest reported performance on a two-class prediction of β-turn and not-β-turn. Furthermore NetTurnP shows improved performance on some of the specific β-turn types. In the present work, neural network methods have been trained to predict β-turn or not and individual β-turn types from the primary amino acid sequence. The individual β-turn types I, I', II, II', VIII, VIa1, VIa2, VIba and IV have been predicted based on classifications by PROMOTIF, and the two-class prediction of β-turn or not is a superset comprised of all β-turn types. The performance is evaluated using a golden set of non-homologous sequences known as BT426. Our two-class prediction method achieves a performance of: MCC=0.50, Qtotal=82.1%, sensitivity=75.6%, PPV=68.8% and AUC=0.864. We have compared our performance to eleven other prediction methods that obtain Matthews correlation coefficients in the range of 0.17-0.47. For the type specific β-turn predictions, only type I and II can be predicted with reasonable Matthews correlation coefficients, where we obtain performance values of 0.36 and 0.31, respectively. CONCLUSION: The NetTurnP method has been implemented as a webserver, which is freely available at http://www.cbs.dtu.dk/services/NetTurnP/. NetTurnP is the only available webserver that allows submission of multiple sequences.

NetTurnP--neural network prediction of beta-turns by use of evolutionary information and predicted protein sequence features.

Science.gov (United States)

Petersen, Bent; Lundegaard, Claus; Petersen, Thomas Nordahl

2010-11-30

β-turns are the most common type of non-repetitive structures, and constitute on average 25% of the amino acids in proteins. The formation of β-turns plays an important role in protein folding, protein stability and molecular recognition processes. In this work we present the neural network method NetTurnP, for prediction of two-class β-turns and prediction of the individual β-turn types, by use of evolutionary information and predicted protein sequence features. It has been evaluated against a commonly used dataset BT426, and achieves a Matthews correlation coefficient of 0.50, which is the highest reported performance on a two-class prediction of β-turn and not-β-turn. Furthermore NetTurnP shows improved performance on some of the specific β-turn types. In the present work, neural network methods have been trained to predict β-turn or not and individual β-turn types from the primary amino acid sequence. The individual β-turn types I, I', II, II', VIII, VIa1, VIa2, VIba and IV have been predicted based on classifications by PROMOTIF, and the two-class prediction of β-turn or not is a superset comprised of all β-turn types. The performance is evaluated using a golden set of non-homologous sequences known as BT426. Our two-class prediction method achieves a performance of: MCC=0.50, Qtotal=82.1%, sensitivity=75.6%, PPV=68.8% and AUC=0.864. We have compared our performance to eleven other prediction methods that obtain Matthews correlation coefficients in the range of 0.17-0.47. For the type specific β-turn predictions, only type I and II can be predicted with reasonable Matthews correlation coefficients, where we obtain performance values of 0.36 and 0.31, respectively. The NetTurnP method has been implemented as a webserver, which is freely available at http://www.cbs.dtu.dk/services/NetTurnP/. NetTurnP is the only available webserver that allows submission of multiple sequences.

Self-help groups and mental health/substance use agencies: the benefits of organizational exchange.

Science.gov (United States)

Powell, Thomas; Perron, Brian Edward

2010-02-01

Self-help groups benefit clients by linking them to people who have "been there" and are successfully coping with their situations. Mental health/substance use agencies can increase access to evidence-based benefits of self-help groups by engaging them in organizational exchanges. Organizational theories are used to frame beneficial exchanges with self-help groups. Adaptational theory is used to frame exchanges with self-help groups and various service agency subunits, e.g., board, practitioner, and client units. Institutional theory is used to frame joint agency/self-help initiatives to promote community acceptance of self-help groups, which in turn may enhance the credibility of the professional agency.

and γγ-turns in proteins revisited: A new set of amino acid turn-type de

Indian Academy of Sciences (India)

mine, valine, glutamic acid and alanine has decreased for β-turns. Certain new amino acid preferences were observed for both turn types and individual amino acids showed turn-type dependent positional preferences. The rationale for new amino acid preferences are discussed in the light of hydrogen bonds and other.

Predictors and use of non-pharmacologic interventions for procedural pain associated with turning among hospitalized adults

Science.gov (United States)

Faigeles, Bonnie; Howie-Esquivel, Jill; Miaskowski, Christine; Stanik - Hutt, Julie; Thompson, Carol; White, Cheri; Wild, Lorie Rietman; Puntillo, Kathleen

2010-01-01

Background Many hospitalized adults cannot reposition themselves in their beds. Therefore, they are regularly turned by their nurses, primarily to prevent pressure ulcer formation. Previous research indicates that turning is painful and that patients are rarely pre-medicated with analgesics. Non-pharmacologic interventions may be used to help with this painful procedure. However, no published research was found on the use of non-pharmacologic interventions for turning of hospitalized patients. Objectives 1) to describe patient pain characteristics during turning and their association with patient demographic and clinical characteristics; 2) to determine the frequency of use of various non-pharmacologic interventions for hospitalized adult patients undergoing the painful procedure of turning; and 3) to identify factors that predict the use of specific non-pharmacologic interventions for pain associated with turning. Methods Hospitalized adult patients who experienced turning, the nurses caring for them, and others who were present at the time of turning were asked if they used various non-pharmacologic interventions to manage pain during the turning. Results Of 1395 patients, 92.5% received at least one non-pharmacologic intervention. Most frequently used were calming voice (65.7%), information (60.6%), and deep breathing (37.9%). Critical care patients were more likely to receive a calming voice (OR= 1.66, ppatients. Those reporting higher pain were consistently more likely to receive each of the three interventions (OR=1.01, pturning procedure. The specific interventions used most often are ones that can be initiated spontaneously. These data suggest that patients, nurses, and family members respond to patients’ turning-related pain by using non-pharmacologic interventions. PMID:23688362

Revitalização de brownfields : da aplicação do princípio da função socioambiental da propriedade ao gerenciamento de áreas contaminadas ou suspeitas de contaminação

OpenAIRE

Mattei, Juliana Flávia

2010-01-01

Como efeito negativo da sociedade marcada pelo desenvolvimento industrial a qualquer preço, especialmente decorrente do revés processo histórico de desativação de indústrias, surgiram no espaço urbano extensas áreas abandonadas suspeitas ou efetivamente contaminadas. Estas áreas são denominadas brownfields, e podem ser encontradas em praticamente todos os países industrializados ou em processo intenso de industrialização, em qualquer dos Continentes. Mostra-se relevante perceber a situação at...

Beta-and gamma-turns in proteins revisited: a new set of amino acid turn-type dependent positional preferences and potentials.

Science.gov (United States)

Guruprasad, K; Rajkumar, S

2000-06-01

The number of beta-turns in a representative set of 426 protein three-dimensional crystal structures selected from the recent Protein Data Bank has nearly doubled and the number of gamma-turns in a representative set of 320 proteins has increased over seven times since the previous analysis. Beta-turns (7153) and gamma-turns (911) extracted from these proteins were used to derive a revised set of type-dependent amino acid positional preferences and potentials. Compared with previous results, the preference for proline, methionine and tryptophan has increased and the preference for glutamine, valine, glutamic acid and alanine has decreased for beta-turns. Certain new amino acid preferences were observed for both turn types and individual amino acids showed turn-type dependent positional preferences. The rationale for new amino acid preferences are discussed in the light of hydrogen bonds and other interactions involving the turns. Where main-chain hydrogen bonds of the type NH(i + 3) --> CO(i) were not observed for some beta-turns, other main-chain hydrogen bonds or solvent interactions were observed that possibly stabilize such beta-turns. A number of unexpected isolated beta-turns with proline at i + 2 position were also observed. The NH(i + 2) --> CO(i) hydrogen bond was observed for almost all gamma-turns. Nearly 20% classic gamma-turns and 43% inverse gamma-turns are isolated turns.

Turn-by-Turn Imaging of the Transverse Beam Profile in PEP-II

Energy Technology Data Exchange (ETDEWEB)

Fisher, Alan A.; Petree, Mark; /SLAC

2006-12-18

During injection or instability, the transverse profile of an individual bunch in a storage ring can change significantly in a few turns. However, most synchrotron-light imaging techniques are not designed for this time scale. We have developed a novel diagnostic that enhances the utility of a fast gated camera by adding, inexpensively, some features of a dual-axis streak camera, in order to watch the turn-by-turn evolution of the transverse profile, in both x and y. The beam's elliptical profile is reshaped using cylindrical lenses to form a tall and narrow ellipse--essentially the projection of the full ellipse onto one transverse axis. We do this projection twice, by splitting the beam into two paths at different heights, and rotating the ellipse by 90{sup o} on one path. A rapidly rotating mirror scans these vertical ''pencils'' of light horizontally across the photocathode of the camera, which is gated for 3 ns on every Nth ring turn. A single readout of the camera captures 100 images, looking like a stroboscopic photograph of a moving object. We have observed the capture of injected charge into a bunch and the rapid change of beam size at the onset of a fast instability.

Clinical evaluation of an automated turning bed.

Science.gov (United States)

Melland, H I; Langemo, D; Hanson, D; Olson, B; Hunter, S

1999-01-01

The purposes of this study were to assess client comfort and sleep quality, client physiologic response (skin and respiratory status), the effect on the need for caregiver assistance, and cost when using an automated turning bed. Nonexperimental, evaluative study. Twenty-four adult home or long-term care resident subjects who had a degenerative disease, spinal cord injury, stroke, cerebral palsy, or back surgery. Each subject agreed to use the automated turning bed for four weeks. Researchers completed a demographic survey and skin assessment, and assessed each subject for pressure ulcer risk and for the need of assistance of a care giver for turning before and after the four weeks of using the turning bed. Subjects rated the turning bed in terms of comfort and sleep quality. Subjects rated the turning bed as more comfortable than their own bed and expressed satisfaction at the pain relief attained when on the turning bed. While using the turning bed, there was a significant improvement in sleep quality. No skin breakdown or deterioration in respiratory status occurred. Fewer subjects required the assistance of a caregiver for turning when on the turning bed. This automated turning bed shows great promise in meeting a need for patients with limited mobility whether they are homebound or in a residential community. Future studies that further investigate use of the turning bed for postoperative back patients while still in the acute care setting are indicated. Replicative studies with a larger sample size are also indicated.

and γγ-turns in proteins revisited: A new set of amino acid turn-type de

Indian Academy of Sciences (India)

cent Protein Data Bank has nearly doubled and the number of γ-turns in a representative set of 320 proteins has in- creased over seven times since the previous analysis. β-turns (7153) and γ-turns (911) extracted from these proteins were used to derive a revised set of type-dependent amino acid positional preferences and ...

Conformational interconversions in peptide beta-turns: analysis of turns in proteins and computational estimates of barriers.

Science.gov (United States)

Gunasekaran, K; Gomathi, L; Ramakrishnan, C; Chandrasekhar, J; Balaram, P

1998-12-18

The two most important beta-turn features in peptides and proteins are the type I and type II turns, which differ mainly in the orientation of the central peptide unit. Facile conformational interconversion is possible, in principle, by a flip of the central peptide unit. Homologous crystal structures afford an opportunity to structurally characterize both possible conformational states, thus allowing identification of sites that are potentially stereochemically mobile. A representative data set of 250 high-resolution (turns that are assigned different conformational types (type I/type II) in related structures. A total of 55 examples of beta-turns were identified as possible candidates for a stereochemically mobile site. Of the 55 examples, 45 could be classified as a potential site for interconversion between type I and type II beta-turns, while ten correspond to flips from type I' to type II' structures. As a further check, the temperature factors of the central peptide unit carbonyl oxygen atom of the 55 examples were examined. The analysis reveals that the turn assignments are indeed reliable. Examination of the secondary structures at the flanking positions of the flippable beta-turns reveals that seven examples occur in the loop region of beta-hairpins, indicating that the formation of ordered secondary structures on either side of the beta-turn does not preclude local conformational variations. In these beta-turns, Pro (11 examples), Lys (nine examples) and Ser (seven examples) were most often found at the i+1 position. Glycine was found to occur overwhelmingly at position i+2 (28 examples), while Ser (seven examples) and Asn (six examples) were amongst the most frequent residues. Activation energy barriers for the interconversion between type I and type II beta-turns were computed using the peptide models Ac-Pro-Aib-NHMe and Ac-Pro-Gly-NHMe within the framework of the AM1 semi-empirical molecular orbital procedure. In order to have a uniform basis for

NetTurnP – Neural Network Prediction of Beta-turns by Use of Evolutionary Information and Predicted Protein Sequence Features

DEFF Research Database (Denmark)

Petersen, Bent; Lundegaard, Claus; Petersen, Thomas Nordahl

2010-01-01

is the highest reported performance on a two-class prediction of β-turn and not-β-turn. Furthermore NetTurnP shows improved performance on some of the specific β-turn types. In the present work, neural network methods have been trained to predict β-turn or not and individual β-turn types from the primary amino......β-turns are the most common type of non-repetitive structures, and constitute on average 25% of the amino acids in proteins. The formation of β-turns plays an important role in protein folding, protein stability and molecular recognition processes. In this work we present the neural network method...... NetTurnP, for prediction of two-class β-turns and prediction of the individual β-turn types, by use of evolutionary information and predicted protein sequence features. It has been evaluated against a commonly used dataset BT426, and achieves a Matthews correlation coefficient of 0.50, which...

Effects of turning on skin-bed interface pressures in healthy adults.

Science.gov (United States)

Peterson, Matthew J; Schwab, Wilhelm; van Oostrom, Johannes H; Gravenstein, Nikolaus; Caruso, Lawrence J

2010-07-01

This paper is a report of a study of the effects of lateral turning on skin-bed interface pressures in the sacral, trochanteric and buttock regions, and its effectiveness in unloading at-risk tissue. Minimizing skin-support surface interface pressure is important in pressure ulcer prevention, but the effect of standard patient repositioning on skin interface pressure has not been objectively established. Data were collected from 15 healthy adults from a university-affiliated hospital. Mapped 24-inch x 24-inch (2304 half-inch sensors) interface pressure profiles were obtained in the supine position, followed by lateral turning with pillow or wedge support and subsequent head-of-bed elevation to 30 degrees . Raising the head-of-bed to 30 degrees in the lateral position statistically significantly increased peak interface pressures and total area > or = 32 mmHg. Comparing areas > or = 32 mmHg from all positions, 93% of participants had skin areas with interface pressures > or = 32 mmHg throughout all positions (60 +/- 54 cm(2)), termed 'triple jeopardy areas'. The triple jeopardy area increased statistically significantly with wedges as compared to pillows (153 +/- 99 cm(2) vs. 48 +/- 47 cm(2), P turning by experienced intensive care unit nurses does not reliably unload all areas of high skin-bed interface pressures. These areas remain at risk for skin breakdown, and help to explain why pressure ulcers occur despite the implementation of standard preventive measures. Support materials for maintaining lateral turned positions can also influence tissue unloading and triple jeopardy areas.

Electrical Machines: Turn-to-Turn Capacitance in Formed Windings with Rectangular Cross-Section Wire

NARCIS (Netherlands)

Djukic, Nenad; Encica, L.; Paulides, Johan

2015-01-01

Calculation of turn-to-turn capacitance (Ctt) in electrical machines (EMs) with formed windings with rectangular cross-section wire is presented. Three calculation methods are used for the calculation of Ctt in case of rectangular conductors – finite element (FE) method and two previously published

Brownfields to green fields: Realising wider benefits from practical contaminant phytomanagement strategies.

Science.gov (United States)

Cundy, A B; Bardos, R P; Puschenreiter, M; Mench, M; Bert, V; Friesl-Hanl, W; Müller, I; Li, X N; Weyens, N; Witters, N; Vangronsveld, J

2016-12-15

Gentle remediation options (GROs) are risk management strategies or technologies involving plant (phyto-), fungi (myco-), and/or bacteria-based methods that result in a net gain (or at least no gross reduction) in soil function as well as effective risk management. GRO strategies can be customised along contaminant linkages, and can generate a range of wider economic, environmental and societal benefits in contaminated land management (and in brownfields management more widely). The application of GROs as practical on-site remedial solutions is still limited however, particularly in Europe and at trace element (typically metal and metalloid) contaminated sites. This paper discusses challenges to the practical adoption of GROs in contaminated land management, and outlines the decision support tools and best practice guidance developed in the European Commission FP7-funded GREENLAND project aimed at overcoming these challenges. The GREENLAND guidance promotes a refocus from phytoremediation to wider GROs- or phyto-management based approaches which place realisation of wider benefits at the core of site design, and where gentle remediation technologies can be applied as part of integrated, mixed, site risk management solutions or as part of "holding strategies" for vacant sites. The combination of GROs with renewables, both in terms of biomass generation but also with green technologies such as wind and solar power, can provide a range of economic and other benefits and can potentially support the return of low-level contaminated sites to productive usage, while combining GROs with urban design and landscape architecture, and integrating GRO strategies with sustainable urban drainage systems and community gardens/parkland (particularly for health and leisure benefits), has large potential for triggering GRO application and in realising wider benefits in urban and suburban systems. Quantifying these wider benefits and value (above standard economic returns) will be

The Reading Turn-Around: A Five Part Framework for Differentiated Instruction. Practitioners Bookshelf, Language & Literacy Series

Science.gov (United States)

Jones, Stephanie; Clarke, Lane; Enriquez, Grace

2009-01-01

This book demonstrates a five-part framework for teachers, reading specialists, and literacy coaches who want to help their least engaged students become powerful readers. Merging theory and practice, the guide offers successful strategies to reach your "struggling" learners. The authors show how you can "turn-around" your instructional practice,…

32 CFR 636.23 - Turning movements.

Science.gov (United States)

2010-07-01

... Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL... movements. (a) U-turns are prohibited on all streets in the cantonment area. (b) Right-turns will be made from a position as close to the right edge or right curb of the roadway as possible. (c) Left-turns...

Turn stability in beta-hairpin peptides: Investigation of peptides containing 3:5 type I G1 bulge turns.

Science.gov (United States)

Blandl, Tamas; Cochran, Andrea G; Skelton, Nicholas J

2003-02-01

The turn-forming ability of a series of three-residue sequences was investigated by substituting them into a well-characterized beta-hairpin peptide. The starting scaffold, bhpW, is a disulfide-cyclized 10-residue peptide that folds into a stable beta-hairpin with two antiparallel strands connected by a two-residue reverse turn. Substitution of the central two residues with the three-residue test sequences leads to less stable hairpins, as judged by thiol-disulfide equilibrium measurements. However, analysis of NMR parameters indicated that each molecule retains a significant folded population, and that the type of turn adopted by the three-residue sequence is the same in all cases. The solution structure of a selected peptide with a PDG turn contained an antiparallel beta-hairpin with a 3:5 type I + G1 bulge turn. Analysis of the energetic contributions of individual turn residues in the series of peptides indicates that substitution effects have significant context dependence, limiting the predictive power of individual amino acid propensities for turn formation. The most stable and least stable sequences were also substituted into a more stable disulfide-cyclized scaffold and a linear beta-hairpin scaffold. The relative stabilities remained the same, suggesting that experimental measurements in the bhpW context are a useful way to evaluate turn stability for use in protein design projects. Moreover, these scaffolds are capable of displaying a diverse set of turns, which can be exploited for the mimicry of protein loops or for generating libraries of reverse turns.

Turning collectors for solar radiation

Science.gov (United States)

Barak, Amitzur Z.

1976-01-01

A device is provided for turning a solar collector about the polar axis so that the collector is directed toward the sun as the sun tracks the sky each day. It includes two heat-expansive elements and a shadow plate. In the morning a first expansive element is heated, expands to turn the collector to face the sun, while the second expansive element is shaded by the plate. In the afternoon the second element is heated, expands to turn the collector to face the sun, while the first is shaded by the plate.

NetTurnP – Neural Network Prediction of Beta-turns by Use of Evolutionary Information and Predicted Protein Sequence Features

Science.gov (United States)

Petersen, Bent; Lundegaard, Claus; Petersen, Thomas Nordahl

2010-01-01

β-turns are the most common type of non-repetitive structures, and constitute on average 25% of the amino acids in proteins. The formation of β-turns plays an important role in protein folding, protein stability and molecular recognition processes. In this work we present the neural network method NetTurnP, for prediction of two-class β-turns and prediction of the individual β-turn types, by use of evolutionary information and predicted protein sequence features. It has been evaluated against a commonly used dataset BT426, and achieves a Matthews correlation coefficient of 0.50, which is the highest reported performance on a two-class prediction of β-turn and not-β-turn. Furthermore NetTurnP shows improved performance on some of the specific β-turn types. In the present work, neural network methods have been trained to predict β-turn or not and individual β-turn types from the primary amino acid sequence. The individual β-turn types I, I', II, II', VIII, VIa1, VIa2, VIba and IV have been predicted based on classifications by PROMOTIF, and the two-class prediction of β-turn or not is a superset comprised of all β-turn types. The performance is evaluated using a golden set of non-homologous sequences known as BT426. Our two-class prediction method achieves a performance of: MCC  = 0.50, Qtotal = 82.1%, sensitivity  = 75.6%, PPV  = 68.8% and AUC  = 0.864. We have compared our performance to eleven other prediction methods that obtain Matthews correlation coefficients in the range of 0.17 – 0.47. For the type specific β-turn predictions, only type I and II can be predicted with reasonable Matthews correlation coefficients, where we obtain performance values of 0.36 and 0.31, respectively. Conclusion The NetTurnP method has been implemented as a webserver, which is freely available at http://www.cbs.dtu.dk/services/NetTurnP/. NetTurnP is the only available webserver that allows submission of multiple sequences. PMID:21152409

Predicting turns in proteins with a unified model.

Directory of Open Access Journals (Sweden)

Qi Song

Full Text Available MOTIVATION: Turns are a critical element of the structure of a protein; turns play a crucial role in loops, folds, and interactions. Current prediction methods are well developed for the prediction of individual turn types, including α-turn, β-turn, and γ-turn, etc. However, for further protein structure and function prediction it is necessary to develop a uniform model that can accurately predict all types of turns simultaneously. RESULTS: In this study, we present a novel approach, TurnP, which offers the ability to investigate all the turns in a protein based on a unified model. The main characteristics of TurnP are: (i using newly exploited features of structural evolution information (secondary structure and shape string of protein based on structure homologies, (ii considering all types of turns in a unified model, and (iii practical capability of accurate prediction of all turns simultaneously for a query. TurnP utilizes predicted secondary structures and predicted shape strings, both of which have greater accuracy, based on innovative technologies which were both developed by our group. Then, sequence and structural evolution features, which are profile of sequence, profile of secondary structures and profile of shape strings are generated by sequence and structure alignment. When TurnP was validated on a non-redundant dataset (4,107 entries by five-fold cross-validation, we achieved an accuracy of 88.8% and a sensitivity of 71.8%, which exceeded the most state-of-the-art predictors of certain type of turn. Newly determined sequences, the EVA and CASP9 datasets were used as independent tests and the results we achieved were outstanding for turn predictions and confirmed the good performance of TurnP for practical applications.

What 'empirical turn in bioethics'?

Science.gov (United States)

Hurst, Samia

2010-10-01

Uncertainty as to how we should articulate empirical data and normative reasoning seems to underlie most difficulties regarding the 'empirical turn' in bioethics. This article examines three different ways in which we could understand 'empirical turn'. Using real facts in normative reasoning is trivial and would not represent a 'turn'. Becoming an empirical discipline through a shift to the social and neurosciences would be a turn away from normative thinking, which we should not take. Conducting empirical research to inform normative reasoning is the usual meaning given to the term 'empirical turn'. In this sense, however, the turn is incomplete. Bioethics has imported methodological tools from empirical disciplines, but too often it has not imported the standards to which researchers in these disciplines are held. Integrating empirical and normative approaches also represents true added difficulties. Addressing these issues from the standpoint of debates on the fact-value distinction can cloud very real methodological concerns by displacing the debate to a level of abstraction where they need not be apparent. Ideally, empirical research in bioethics should meet standards for empirical and normative validity similar to those used in the source disciplines for these methods, and articulate these aspects clearly and appropriately. More modestly, criteria to ensure that none of these standards are completely left aside would improve the quality of empirical bioethics research and partly clear the air of critiques addressing its theoretical justification, when its rigour in the particularly difficult context of interdisciplinarity is what should be at stake.

Using risk maps to link land value damage and risk as basis of flexible risk management for brownfield redevelopment.

Science.gov (United States)

Chen, I-chun; Ma, Hwong-wen

2013-02-01

Brownfield redevelopment involves numerous uncertain financial risks associated with market demand and land value. To reduce the uncertainty of the specific impact of land value and social costs, this study develops small-scale risk maps to determine the relationship between population risk (PR) and damaged land value (DLV) to facilitate flexible land reutilisation plans. This study used the spatial variability of exposure parameters in each village to develop the contaminated site-specific risk maps. In view of the combination of risk and cost, risk level that most affected land use was mainly 1.00×10(-6) to 1.00×10(-5) in this study area. Village 2 showed the potential for cost-effective conversion with contaminated land development. If the risk of remediation target was set at 5.00×10(-6), the DLV could be reduced by NT$15,005 million for the land developer. The land developer will consider the net benefit by quantifying the trade-off between the changes of land value and the cost of human health. In this study, small-scale risk maps can illuminate the economic incentive potential for contaminated site redevelopment through the adjustment of land value damage and human health risk. Copyright © 2012 Elsevier Ltd. All rights reserved.

CONNECTION OF TURN AHEAD AND TURN BACK WITH MOTORIC ABILITIES OF THE FOURTH GRADE OF HIGH SCHOOL

Directory of Open Access Journals (Sweden)

Jovica Petković

2008-08-01

Full Text Available The research is done for the purpose of determination and defining of the level of connection between some motoric abilities with success in realization of programmed contents from the area of gymnastics (turn ahead and turn back. The research is done on the sample of fifty students from the fourth grade of High School, on ten motoric tests and on two specific motoric assignments – turn ahead and turn back. The results of this research clearly point that there exist the multitude of statistically important coefficients of correlation between treated motoric abilities and applied motoric assignments.

The Philosophy of Turning Points

DEFF Research Database (Denmark)

Turcan, Romeo V.

2013-01-01

business and management field, the turning point is seen as a valuable unit of analysis within the research field. It is expected that this paper will encourage a dynamic scholarly conversation about the concept of turning point and how it can aid international business researchers in the development...

Prediction of beta-turns with learning machines.

Science.gov (United States)

Cai, Yu-Dong; Liu, Xiao-Jun; Li, Yi-Xue; Xu, Xue-biao; Chou, Kuo-Chen

2003-05-01

The support vector machine approach was introduced to predict the beta-turns in proteins. The overall self-consistency rate by the re-substitution test for the training or learning dataset reached 100%. Both the training dataset and independent testing dataset were taken from Chou [J. Pept. Res. 49 (1997) 120]. The success prediction rates by the jackknife test for the beta-turn subset of 455 tetrapeptides and non-beta-turn subset of 3807 tetrapeptides in the training dataset were 58.1 and 98.4%, respectively. The success rates with the independent dataset test for the beta-turn subset of 110 tetrapeptides and non-beta-turn subset of 30,231 tetrapeptides were 69.1 and 97.3%, respectively. The results obtained from this study support the conclusion that the residue-coupled effect along a tetrapeptide is important for the formation of a beta-turn.

Turn-Based War Chess Model and Its Search Algorithm per Turn

Directory of Open Access Journals (Sweden)

Hai Nan

2016-01-01

Full Text Available War chess gaming has so far received insufficient attention but is a significant component of turn-based strategy games (TBS and is studied in this paper. First, a common game model is proposed through various existing war chess types. Based on the model, we propose a theory frame involving combinational optimization on the one hand and game tree search on the other hand. We also discuss a key problem, namely, that the number of the branching factors of each turn in the game tree is huge. Then, we propose two algorithms for searching in one turn to solve the problem: (1 enumeration by order; (2 enumeration by recursion. The main difference between these two is the permutation method used: the former uses the dictionary sequence method, while the latter uses the recursive permutation method. Finally, we prove that both of these algorithms are optimal, and we analyze the difference between their efficiencies. An important factor is the total time taken for the unit to expand until it achieves its reachable position. The factor, which is the total number of expansions that each unit makes in its reachable position, is set. The conclusion proposed is in terms of this factor: Enumeration by recursion is better than enumeration by order in all situations.

Study on Turn-to-turn Short Circuit On一line Monitoring System for Dry一type Ai r一core Reactor

Directory of Open Access Journals (Sweden)

GAO Zi-wei

2017-04-01

Full Text Available The change of current value caused by turn-to-turn short circuit of dry-type air-core reactor is so little that failure detection is difficult to be carried out. In order to solve this problem，a new on-line monitoring system based on impedance variation of turn-to-turn short circuit is proposed. The numerical method is applied to analyze the variation of equivalent resistance and equivalent reactance when dry-type air-core reactor winding short circuit happens in different places，and the monitoring method based on harmonic analysis method and quasi- synchronization sampling method is analyzed by theory. The hardware system，which takes single-chip microcomputer as the core of data processing and logic control，completes data acquisition of voltage signal and current signal of the reactor. In the respect of software design，the impedance variation will be uploaded to the PC after it has been calculated by using the above monitoring method，and then monitoring of turn-to-turn short circuit fault will be realized. Finally，the design of on-line monitoring system is studied by testing. The research result shows that，the equivalent resistance increases and the equivalent reactance decreases when turn-to-turn short circuit occurs，and the variation of equivalent resistance is more obvious than equivalent reactance. The experiment results prove that this monitoring method is true and the on-line monitoring system is feasible.

"Why doesn't she seek help for partner abuse?" An exploratory study with South Asian immigrant women.

Science.gov (United States)

Ahmad, Farah; Driver, Natasha; McNally, Mary Jane; Stewart, Donna E

2009-08-01

This study explores why South Asian immigrant women with experiences of partner abuse delay seeking help from professionals. Three focus groups were conducted in Hindi language with South Asian immigrant women in Toronto. Twenty-two women participated with a mean age of 46 years (range 29-68 years). Thematic analysis was conducted on the transcribed data using constant comparison techniques within and across the groups. We found that three major themes emerged from the discussions: reasons for delayed help-seeking, turning points and talking to professionals. Women expressed delaying help-seeking to the point when "Pani sar se guzar jata he" (water crosses over your head). Their dominant reasons for delayed help-seeking were social stigma, rigid gender roles, marriage obligations, expected silence, loss of social support after migration and limited knowledge about available resources and myths about partner abuse. Women usually turned for help only after experiencing pronounced mental and physical health problems. The findings are interpreted in light of participants' immigration context and the socio-cultural norms of patriarchy, collectivism and familism. Prevention approaches to address partner abuse and delayed help-seeking among South Asian immigrant women should include tailored community education, social services to reduce vulnerability, and cultural competency of professionals. Further research and program evaluation is needed to advance the field.

Development process and data management of TurnSTEP, a STEP-compliant CNC system for turning

NARCIS (Netherlands)

Choi, I.; Suh, S.-H; Kim, K.; Song, M.S.; Jang, M.; Lee, B.-E.

2006-01-01

TurnSTEP is one of the earliest STEP-compliant CNC systems for turning. Based on the STEP-NC data model formalized as ISO 14649-12 and 121, it is designed to support intelligent and autonomous control of NC machines for e-manufacturing. The present paper introduces the development process and data

Determinants of the half-turn with the ball in sub-elite youth soccer players.

Science.gov (United States)

Zago, Matteo; Codari, Marina; Grilli, Massimo; Bellistri, Giuseppe; Lovecchio, Nicola; Sforza, Chiarella

2016-06-01

We explored the biomechanics of the 180° change-of-direction with the ball (half-turn) in soccer. We aimed at identifying movement strategies which enhance the players' half-turning performance, by characterising technique kinematics and understanding the structure of biomechanical and anthropometrics variables. Ten Under-13 sub-elite male players were recorded with an optoelectronic motion analyser while performing a 5-m straight dribbling followed by a half-turn with the sole. Joints kinematics differences between faster and slower trials were found in support-side hip rotation, driving-side hip adduction, trunk flexion and rotation, and arms abduction. To unveil the data-set structure, a principal component (PC) analysis and a stepwise linear discriminant analysis were performed using 30 biomechanical parameters and four anthropometric variables for each trial. Seven retained PCs explained 79% of the overall variability, featuring combinations of original variables that help in understanding the factors facilitating fast half-turns: keeping short steps, minimising lateral and forward body movements, and centre-of-mass lowering, even with ample lower limbs ranges of motion (RoM); abducting the upper limbs while limiting trunk flexion and pelvic inclination RoM. Balance and task-constrained exercises may be proposed to improve this technique. Moreover, a quantitative knowledge of the movement structure could give coaches objective insights to better instruct young players.

Data-driven battery product development: Turn battery performance into a competitive advantage.

Energy Technology Data Exchange (ETDEWEB)

Sholklapper, Tal [Voltaiq, Inc.

2016-04-19

Poor battery performance is a primary source of user dissatisfaction across a broad range of applications, and is a key bottleneck hindering the growth of mobile technology, wearables, electric vehicles, and grid energy storage. Engineering battery systems is difficult, requiring extensive testing for vendor selection, BMS programming, and application-specific lifetime testing. This work also generates huge quantities of data. This presentation will explain how to leverage this data to help ship quality products faster using fewer resources while ensuring safety and reliability in the field, ultimately turning battery performance into a competitive advantage.

Fast Turn-off Mine Transient Electromagnetic Transmitter System

Directory of Open Access Journals (Sweden)

ZHENG Xiao-Liang

2014-05-01

Full Text Available For solving problems such as short turn-off time, high linear degree of falling edge, measurement of turn-off time and influence of primary signals for transient electromagnetic transmitter, and restrictions because of the environmental conditions of underground coal mine, this thesis aims at designing a new transient electromagnetic transmitter system suitable for coal mine. Supported by damping absorption circuit, such system applies small volume, sectional transmitting coil, with features of short turn-off time, high linear degree of current falling edge. It uses the transmitter monitoring circuit, which accurately measures turn-off time and simultaneously records the current value changes after turn-off, thus to eliminate the influence of primary field as well as to restore earlier secondary field signals for reference and finally to improve the ability to detect the shallow structure. It turns out that the new system has a shorter turn-off time, a higher linear degree of current falling and more accurate data record of turn-off current.

Prostate Cancer Research Trial Helps John Spencer Treat His Cancer | NIH MedlinePlus the Magazine

Science.gov (United States)

... of this page please turn Javascript on. Feature: Prostate Cancer Prostate Cancer Research Trial Helps John Spencer Treat His Cancer ... because of timely detection and treatment of his prostate cancer. He participated in an NIH-sponsored clinical trial. ...

Increasing protein stability by improving beta-turns.

Science.gov (United States)

Fu, Hailong; Grimsley, Gerald R; Razvi, Abbas; Scholtz, J Martin; Pace, C Nick

2009-11-15

Our goal was to gain a better understanding of how protein stability can be increased by improving beta-turns. We studied 22 beta-turns in nine proteins with 66-370 residues by replacing other residues with proline and glycine and measuring the stability. These two residues are statistically preferred in some beta-turn positions. We studied: Cold shock protein B (CspB), Histidine-containing phosphocarrier protein, Ubiquitin, Ribonucleases Sa2, Sa3, T1, and HI, Tryptophan synthetase alpha-subunit, and Maltose binding protein. Of the 15 single proline mutations, 11 increased stability (Average = 0.8 +/- 0.3; Range = 0.3-1.5 kcal/mol), and the stabilizing effect of double proline mutants was additive. On the basis of this and our previous work, we conclude that proteins can generally be stabilized by replacing nonproline residues with proline residues at the i + 1 position of Type I and II beta-turns and at the i position in Type II beta-turns. Other turn positions can sometimes be used if the phi angle is near -60 degrees for the residue replaced. It is important that the side chain of the residue replaced is less than 50% buried. Identical substitutions in beta-turns in related proteins give similar results. Proline substitutions increase stability mainly by decreasing the entropy of the denatured state. In contrast, the large, diverse group of proteins considered here had almost no residues in beta-turns that could be replaced by Gly to increase protein stability. Improving beta-turns by substituting Pro residues is a generally useful way of increasing protein stability. 2009 Wiley-Liss, Inc.

Anticipation in turn-taking: mechanisms and information sources.

Science.gov (United States)

Riest, Carina; Jorschick, Annett B; de Ruiter, Jan P

2015-01-01

During conversations participants alternate smoothly between speaker and hearer roles with only brief pauses and overlaps. There are two competing types of accounts about how conversationalists accomplish this: (a) the signaling approach and (b) the anticipatory ('projection') approach. We wanted to investigate, first, the relative merits of these two accounts, and second, the relative contribution of semantic and syntactic information to the timing of next turn initiation. We performed three button-press experiments using turn fragments taken from natural conversations to address the following questions: (a) Is turn-taking predominantly based on anticipation or on reaction, and (b) what is the relative contribution of semantic and syntactic information to accurate turn-taking. In our first experiment we gradually manipulated the information available for anticipation of the turn end (providing information about the turn end in advance to completely removing linguistic information). The results of our first experiment show that the distribution of the participants' estimation of turn-endings for natural turns is very similar to the distribution for pure anticipation. We conclude that listeners are indeed able to anticipate a turn-end and that this strategy is predominantly used in turn-taking. In Experiment 2 we collected purely reacted responses. We used the distributions from Experiments 1 and 2 together to estimate a new dependent variable called Reaction Anticipation Proportion. We used this variable in our third experiment where we manipulated the presence vs. absence of semantic and syntactic information by low-pass filtering open-class and closed class words in the turn. The results suggest that for turn-end anticipation, both semantic and syntactic information are needed, but that the semantic information is a more important anticipation cue than syntactic information.

Breaking New Ground with High Resolution Turn-By-Turn BPMs at the ESRF

CERN Document Server

Farvacque, L; Scheidt, K

2001-01-01

This High-Resolution, Turn-by-Turn BPM system is a low-cost extension to the existing BPM system, based on the RF-multiplexing concept, used for slow Closed-Orbit measurements. With this extension Beam Position measurements in both planes, at all (224) BPMs in the 844 m ESRF Storage Ring, for up to 2048 Orbit Turns with 1 μm resolution are performed. The data acquisition is synchronised to a single, flat 1 μs, transverse deflection kick to the 1μs beamfill in the 2.8μs revolution period. The high quality of this synchronisation, together with the good reproducibility of the deflection kick and the overall stability of the Closed Orbit beam allows to repeat the kick and acquisition in many cycles. The subsequent averaging of the data obtained in these cycles yields the 1um resolution. The latter allows lattice measurements with high precision such as the localisation of very small focussing errors and modulation in Beta values and phase advances. It also finds an unique ...

Laterality of the lower limbs and carving turns

Directory of Open Access Journals (Sweden)

F Vaverka

2010-06-01

Full Text Available The aim of this study is to discover whether the lateral preference of the lower limbs influences the execution of successive carving turns or not. Six skilled skiers (men, right lower limb preference, age 26.5±1.61 years old, height 1.80±0.04 m, body weight 78.83±5.46 kg executed 30 (18 left, 12 right symmetrical carving turns. Kinetic analysis of the final vertical component of reaction force FZ(t measured dynamometrically provided the information about the time of initiation and steering phases of the turn and the maximum force, average force and force impulse. Differences between right and left turns are not statistically significant. Factual analyses of the magnitude of measured variables confirmed that left turns were found to have a longer duration, a shorter initiation and longer steering phase, and higher level of produced force and force impulse in comparison with right turns. Based on the results it can be concluded that the turns where the outer leg is the preferred limb are preferentially used to regulate the speed of the ride. The study of laterality in symmetrical carving turns has proven that lateral preference of lower extremities influences the execution of the turn also by expert skiers.

Wittgenstein and the linguistic turn in social theory

DEFF Research Database (Denmark)

Hermansen, Jens Christian

of Winch in social theory, the wider and more recent influence of Wittgenstein in areas such as technology and science studies, social theory, feminist and gender studies and conversation and discourse analysis is also considered. Historically, the readings of Wittgenstein in the social sciences have taken...... of the linguistic turn in social theory, the linguistic turn is a double-edged sword of both profound insights and limits; the claim is that the limits of the linguistic turn are the strengths of functionalist, structuralist and materialist approaches to the social sciences. The approach of the critical turn...... is to develop a more comprehensive social theory that is sensitive to these strengths and thus supersedes the limits of the linguistic turn. This paper suggests a different approach. Against the critical turn, the paper argues that the limits of the linguistic turn are identical with the very assumptions...

Characterization of beta-turn and Asx-turns mimicry in a model peptide: stabilization via C--H . . . O interaction.

Science.gov (United States)

Thakur, A K; Kishore, R

2006-04-15

The chemical synthesis and single-crystal X-ray diffraction analysis of a model peptide, Boc-Thr-Thr-NH2 (1) comprised of proteinogenic residues bearing an amphiphilic Cbeta -stereogenic center, has been described. Interestingly, the analysis of its molecular structure revealed the existence of a distinct conformation that mimics a typical beta-turn and Asx-turns, i.e., the two Thr residues occupy the left- and right-corner positions. The main-chain torsion angles of the N- and C-terminal residues i.e., semiextended: phi = -68.9 degrees , psi = 128.6 degrees ; semifolded: phi = -138.1 degrees , psi = 2.5 degrees conformations, respectively, in conjunction with a gauche- disposition of the obligatory C-terminus Thr CgammaH3 group, characterize the occurrence of the newly described beta-turn- and Asx-turns-like topology. The preferred molecular structure is suggested to be stabilized by an effective nonconventional main-chain to side-chain Ci=O . . . H--Cgamma(i+2)-type intraturn hydrogen bond. Noteworthy, the observed topology of the resulting 10-membered hydrogen-bonded ring is essentially similar to the one perceived for a classical beta-turn and the Asx-turns, stabilized by a conventional intraturn hydrogen bond. Considering the signs as well as magnitudes of the backbone torsion angles and the orientation of the central peptide bond, the overall mimicked topology resembles the type II beta-turn or type II Asx-turns. An analysis of Xaa-Thr sequences in high-resolution X-ray elucidated protein structures revealed the novel topology prevalence in functional proteins (unpublished). In view of indubitable structural as well as functional importance of nonconventional interactions in bioorganic and biomacromolecules, we intend to highlight the participation of Thr CgammaH in the creation of a short-range C=O . . . H--Cgamma -type interaction in peptides and proteins. Copyright 2006 Wiley Periodicals, Inc.

METHODICAL MODEL FOR TEACHING BASIC SKI TURN

Directory of Open Access Journals (Sweden)

Danijela Kuna

2013-07-01

Full Text Available With the aim of forming an expert model of the most important operators for basic ski turn teaching in ski schools, an experiment was conducted on a sample of 20 ski experts from different countries (Croatia, Bosnia and Herzegovina and Slovenia. From the group of the most commonly used operators for teaching basic ski turn the experts picked the 6 most important: uphill turn and jumping into snowplough, basic turn with hand sideways, basic turn with clapping, ski poles in front, ski poles on neck, uphill turn with active ski guiding. Afterwards, ranking and selection of the most efficient operators was carried out. Due to the set aim of research, a Chi square test was used, as well as the differences between frequencies of chosen operators, differences between values of the most important operators and differences between experts due to their nationality. Statistically significant differences were noticed between frequencies of chosen operators (c2= 24.61; p=0.01, while differences between values of the most important operators were not obvious (c2= 1.94; p=0.91. Meanwhile, the differences between experts concerning thier nationality were only noticeable in the expert evaluation of ski poles on neck operator (c2=7.83; p=0.02. Results of current research are reflected in obtaining useful information about methodological priciples of learning basic ski turn organization in ski schools.

Informing Physics: Jacob Bekenstein and the Informational Turn in Theoretical Physics

Science.gov (United States)

Belfer, Israel

2014-03-01

In his PhD dissertation in the early 1970s, the Mexican-Israeli theoretical physicist Jacob Bekenstein developed the thermodynamics of black holes using a generalized version of the second law of thermodynamics. This work made it possible for physicists to describe and analyze black holes using information-theoretical concepts. It also helped to transform information theory into a fundamental and foundational concept in theoretical physics. The story of Bekenstein's work—which was initially opposed by many scientists, including Stephen Hawking—highlights the transformation within physics towards an information-oriented scientific mode of theorizing. This "informational turn" amounted to a mild-mannered revolution within physics, revolutionary without being rebellious.

Urban Agriculture, Commons and Urban Policies: Scaling up Local Innovation

Directory of Open Access Journals (Sweden)

François Mancebo

2016-04-01

Full Text Available May urban agriculture be the cornerstone that helps reconfigure more sustainable cities and if so, under which conditions? And if so, what type of urban agriculture? Such are the two issues underlying this article. Why not counteracting urban sprawl by fostering what could be called “rural sprawl”, by introducing nature and rural characteristics such as farming within the city, in its interstitial areas and wastelands? In this perspective, urban agriculture becomes a common good, bringing people together and reshaping the whole urban fabric that would eventually propose a radical remaking of the urban. Urban agriculture lends particularly well to long-lasting urban policies, especially those turning environmental “bads”—such as brownfields and wastelands—into environmental “goods” and urban amenities. Urban agriculture in interstitial abandoned urban areas may be one of cities’ main seedbeds of creative innovation. It is all about the right to decide and the power to create, renewing and deepening what Henri Lefebvre called The Right to the City.

Experience sharing, emotional reciprocity, and turn-taking

Directory of Open Access Journals (Sweden)

Melisa eStevanovic

2015-04-01

Full Text Available In this perspective article, we consider the relationship between experience sharing and turn-taking. There is much evidence suggesting that human social interaction is permeated by two temporal organizations: (1 the sequential framework of turn-taking and (2 the concurrent framework of emotional reciprocity. From this perspective, we introduce two alternative hypotheses about how the relationship between experience sharing and turn-taking could be viewed. According to the first hypothesis, the home environment of experience sharing is in the concurrent framework of emotional reciprocity, while the motivation to share experiences is in tension with the sequential framework of turn-taking. According to the second hypothesis, then again, people’s inclination to coordinate their actions in terms of turn-taking is motivated precisely by their propensity to share experiences. We consider theoretical and empirical ideas in favor of both of these hypotheses and discuss their implications for future research.

Exploring interaction between a non-speaking boy using aided AAC and his everyday communication partners: features of turn organizing and turn design

DEFF Research Database (Denmark)

Pilesjö, Maja Sigurd; Rasmussen, Gitte

2011-01-01

-at-action is suggested. The analyses demonstrate that the boy’s turn-at-actions are oriented to as a co-constructed and thus interactionally achieved unit: the boy points at a bliss symbol which is given voice by the speaking co-participant. In and through the relevant made voicing of the turn-at-action, a turn...... AAC, bliss symbolics. The analysis indicates that the participants can collaborately create and orient to units in interaction equivalent to turns in interaction although they differ dramatically from ordinary turns-at-talk. In order to capture the nature of the described units, the category turn...

Turning for Ulcer Reduction (TURN) Study: An Economic Analysis.

Science.gov (United States)

Paulden, Mike; Bergstrom, Nancy; Horn, Susan D; Rapp, Mary; Stern, Anita; Barrett, Ryan; Watkiss, Michael; Krahn, Murray

2014-01-01

The Turning for Ulcer Reduction (TURN) study was a multisite, randomized controlled trial that aimed to determine the optimal frequency of turning nursing facility residents with mobility limitations who are at moderate and high risk for pressure ulcer (PrU) development. Here we present data from the economic analysis. This economic analysis aims to estimate the economic consequences for Ontario of switching from a repositioning schedule of 2-hour intervals to a schedule of 3-hour or 4-hour intervals. Costs considered in the analysis included those associated with nursing staff time spent repositioning residents and with incontinent care supplies, which included briefs, barrier cream, and washcloths. The total economic benefit of switching to 3-hour or 4-hour repositioning is estimated to be $11.05 or $16.74 per day, respectively, for every resident at moderate or high risk of developing PrUs. For a typical facility with 123 residents, 41 (33%) of whom are at moderate or high risk of developing PrUs, the total economic benefit is estimated to be $453 daily for 3-hour or $686 daily for 4-hour repositioning. For Ontario as a whole, assuming that there are 77,933 residents at 634 LTC facilities, 25,927 (33%) of whom are at moderate or high risk of developing PrUs, the total economic benefits of switching to 3-hour or 4-hour repositioning are estimated to be $286,420 or $433,913 daily, respectively, equivalent to $104.5 million or $158.4 million per year. We did not consider the savings the Ontario Ministry of Health and Long-Term Care might incur should less frequent repositioning reduce the incidence of work-related injury among nursing staff, so our findings are potentially conservative. A switch to 3-hour or 4-hour repositioning appears likely to yield substantial economic benefits to Ontario without placing residents at greater risk of developing PrUs.

Primordial spectra from sudden turning trajectory

Science.gov (United States)

Noumi, Toshifumi; Yamaguchi, Masahide

2013-12-01

Effects of heavy fields on primordial spectra of curvature perturbations are discussed in inflationary models with a sudden turning trajectory. When heavy fields are excited after the sudden turn and oscillate around the bottom of the potential, the following two effects are generically induced: deformation of the inflationary background spacetime and conversion interactions between adiabatic and isocurvature perturbations, both of which can affect the primordial density perturbations. In this paper, we calculate primordial spectra in inflationary models with sudden turning potentials taking into account both of the two effects appropriately. We find that there are some non-trivial correlations between the two effects in the power spectrum and, as a consequence, the primordial scalar power spectrum has a peak around the scale exiting the horizon at the turn. Though both effects can induce parametric resonance amplifications, they are shown to be canceled out for the case with the canonical kinetic terms. The peak feature and the scale dependence of bispectra are also discussed.

Kantian Turning Point in Gadamer's Philosophical Hermeneutics

Directory of Open Access Journals (Sweden)

Kristína Bosáková

2016-11-01

Full Text Available The paper is treating the theme of a Kantian turning-point in the philosophical hermeneutics of H.- G. Gadamer based on of the harmonic relationship between metaphysics and science in Kantian philosophy from the point of view of the philosophical hermeneutics of Gadamer. The philosophical work of Kant had such an influence on Gadamer that without exaggerating we can talk about the Kantian turning-point in Gadamerian hermeneutics. Grondin, a former student of Gadamer, is talking about Kantian turning-point on the field of aesthetics, but in reality Kantian turning-point means much more than a mere change in the reception of the concept of judgement. It is a discovery of harmonical relationship between the beauty and the moral, between the reason and the sensitivity, between the modern sciences and the metaphysical tradition in the Kantian philosophy, made by Gadamer. This is what we call the Kantian turning-point in Gadamerian hermeneutics.

Searching for Criteria in Evaluating the Monofin Swimming Turn from the Perspective of Coaching and Improving Technique

Science.gov (United States)

Rejman, Marek; Borowska, Grażyna

2008-01-01

and glide time. Key pointsShort time and large surface of the monofin additionally hinders complexity of the turn performance by disturbance in sensing and controlling body in water. Availability of no objective data on monofin swimming turns resulted in research in the field connected with specifying parameters needed for the technique evaluation.Correct turn technique may help to improve swimming race results.The diagram constructed on the basis of the interdependency of the total turn time and the remaining recorded kinematic parameters should establish the areas of searching for mechanism of effective and efficient monofin swimming turn.The most crucial, from the coaching and improving point of view, seem to be activities which take place from the moment of feet wall contact till the first propulsive movements. Therefore, the high quality of the monofin swimming turn technique is not just a simple consequence of the fastest performance of all its component parts.The most important criteria of the quality in the monofin swimming turn technique are: striving for extending in the optimum scope of wall contact time, the time of the push-off phase and the glide time. PMID:24150136

Review Essay: Turn, Turn, Turn Around—Till Categories Blur

Directory of Open Access Journals (Sweden)

Lars Allolio-Näcke

2008-01-01

Full Text Available I begin this review by introducing the book and discussing its manifest content chapter by chapter (see 2.1, focusing particularly on the author's argumentation concerning the development of new orientations in cultural studies and on how, in relation to the turns discussed, the names of the researchers and central categories involved are collected. In a second step, I give a close reading of the book's latent content, which I consider to be more important (see 2.2. In this context I discuss several questions of scientific politics—especially the issue of hegemonic claims. Thirdly, I read the book from the critical standpoint of a psychologist, a sociologist and a theologian and show the shortcomings of BACHMANN-MEDICK's outsider perspective on these disciplines. In this regard I read the book again and provide a critique of the quality of the author's scientific performance (see 3. Finally, I state the reasons I do not recommend reading this book (see 4. URN: urn:nbn:de:0114-fqs0801266

[Study of beta-turns in globular proteins].

Science.gov (United States)

Amirova, S R; Milchevskiĭ, Iu V; Filatov, I V; Esipova, N G; Tumanian, V G

2005-01-01

The formation of beta-turns in globular proteins has been studied by the method of molecular mechanics. Statistical method of discriminant analysis was applied to calculate energy components and sequences of oligopeptide segments, and after this prediction of I type beta-turns has been drawn. The accuracy of true positive prediction is 65%. Components of conformational energy considerably affecting beta-turn formation were delineated. There are torsional energy, energy of hydrogen bonds, and van der Waals energy.

Data versus Spock: lay theories about whether emotion helps or hinders.

Science.gov (United States)

Karnaze, Melissa M; Levine, Linda J

2018-05-01

The android Data from Star Trek admired human emotion whereas Spock viewed emotion as irrational and maladaptive. The theory that emotions fulfil adaptive functions is widely accepted in academic psychology but little is known about laypeople's theories. The present study assessed the extent to which laypeople share Data's view of emotion as helpful or Spock's view of emotion as a hindrance. We also assessed how help and hinder theory endorsement were related to reasoning, emotion regulation, and well-being. Undergraduates (N = 630) completed a stressful timed reasoning task and questionnaires that assessed their theories of emotion, emotion regulation strategies, happiness, and social support. Overall, participants viewed emotion more as a help than a hindrance. The more they endorsed the view that emotion helps, the better their reasoning scores. Endorsing a help theory also predicted the use of reappraisal which, in turn, predicted greater happiness and social support. In contrast, endorsing the view that emotion hinders was associated with emotion suppression and less social support. Thus, people's theories about the functionality of emotion may have important implications for their reasoning and emotional well-being.

Tomographic reconstruction of transverse phase space from turn-by-turn profile data

CERN Document Server

Hancock, S; Lindroos, M

1999-01-01

Tomographic methods have the potential for useful application in beam diagnostics. The tomographic reconstruction of transverse phase space density from turn-by-turn profile data has been studied with particular attention to the effects of dispersion and chromaticity. It is shown that the modified Algebraic Reconstruction Technique (ART) that deals successfully with the problem of non-linear motion in the longitudinal plane cannot, in general, be extended to cover the transverse case. Instead, an approach is proposed in which the effect of dispersion is deconvoluted from the measured profiles before the phase space picture is reconstructed using either the modified ART algorithm or the inverse Radon Transform. This requires an accurate knowledge of the momentum distribution of the beam and the modified ART reconstruction of longitudinal phase space density yields just such information. The method has been tested extensively with simulated data.

Learning From Our Past: How a Vietnam-Era Pacification Program Can Help Us Win in Afghanistan

Science.gov (United States)

2009-09-01

it as an operational and management problem—it was everybody’s business and nobody’s. It fell between the cracks . The reason I began zeroing in on...kind of help from us.”264 Farming programs can also help revive the economy by growing what other nations want to import: pomegranates , almonds...pistachios, raisins, and fruits such as apricots that can be dried or turned into juice.265 The Agribusiness Development Teams manned by state- based

Turning to Ontology in STS? Turning to STS through ‘Ontology’

NARCIS (Netherlands)

van Heur, B.; Leydesdorff, L.; Wyatt, S.

2012-01-01

We examine the evidence for the claim of an ‘ontological turn’ in science and technology studies (STS). Despite an increase in references to ‘ontology’ in STS since 1989, we show that there has not so much been an ontological turn as multiple discussions deploying the language of ontology,

Development of a QFD-based expert system for CNC turning centre selection

Science.gov (United States)

Prasad, Kanika; Chakraborty, Shankar

2015-12-01

Computer numerical control (CNC) machine tools are automated devices capable of generating complicated and intricate product shapes in shorter time. Selection of the best CNC machine tool is a critical, complex and time-consuming task due to availability of a wide range of alternatives and conflicting nature of several evaluation criteria. Although, the past researchers had attempted to select the appropriate machining centres using different knowledge-based systems, mathematical models and multi-criteria decision-making methods, none of those approaches has given due importance to the voice of customers. The aforesaid limitation can be overcome using quality function deployment (QFD) technique, which is a systematic approach for integrating customers' needs and designing the product to meet those needs first time and every time. In this paper, the adopted QFD-based methodology helps in selecting CNC turning centres for a manufacturing organization, providing due importance to the voice of customers to meet their requirements. An expert system based on QFD technique is developed in Visual BASIC 6.0 to automate the CNC turning centre selection procedure for different production plans. Three illustrative examples are demonstrated to explain the real-time applicability of the developed expert system.

FCC-hh turn-around cycle

CERN Document Server

Alemany Fernandez, Reyes; Bartmann, Wolfgang; Buffat, Xavier; Niemi, Arto; Schulte, Daniel; Solfaroli Camillocci, Matteo; Stoel, Linda

2016-01-01

The turn-around cycle time of a collider is defined as the time spent between the end of stable beams and the start of the next stable beams period, and its calculation is of fundamental importance. On one side it is a crucial ingredient for the computation of the optimal time spent in luminosity production, which defines the integrated luminosity per fill or store. On the other side, combined with the availability and reliability of the machine, it allows to perform a detailed breakdown of the operational performance of the collider over an operational season, i.e. percentage of time in stable beams and beam in the machine with respect to down time. This paper presents a preliminary operational cycle definition for the hadron-hadron Future Circular Collider, as a base line for estimating the corresponding turn-around time. The cycle definition is based on the Large Hadron Collider (LHC) operational cycle. Two turn-around times are presented, the theoretical one and a more realistic one based on the LHC exper...

Turning to alcohol?

International Nuclear Information System (INIS)

Reiboro, S.K.

1998-01-01

Brazil is examining whether turning to alcohol could solve its problems. The fuel alcohol producers are lobbying hard for the government to increase the use of alcohol to fuel the country's cars. Not only does using alcohol reduce CO 2 , runs the argument, but the Kyoto agreement might just attract international financing for the project. (author)

Silicon Carbide Emitter Turn-Off Thyristor

Directory of Open Access Journals (Sweden)

Jun Wang

2008-01-01

Full Text Available A novel MOS-controlled SiC thyristor device, the SiC emitter turn-off thyristor (ETO is a promising technology for future high-voltage switching applications because it integrates the excellent current conduction capability of a SiC thyristor with a simple MOS-control interface. Through unity-gain turn-off, the SiC ETO also achieves excellent Safe Operation Area (SOA and faster switching speeds than silicon ETOs. The world's first 4.5-kV SiC ETO prototype shows a forward voltage drop of 4.26 V at 26.5 A/cm2 current density at room and elevated temperatures. Tested in an inductive circuit with a 2.5 kV DC link voltage and a 9.56-A load current, the SiC ETO shows a fast turn-off time of 1.63 microseconds and a low 9.88 mJ turn-off energy. The low switching loss indicates that the SiC ETO could operate at about 4 kHz if 100 W/cm2 conduction and the 100 W/cm2 turn-off losses can be removed by the thermal management system. This frequency capability is about 4 times higher than 4.5-kV-class silicon power devices. The preliminary demonstration shows that the SiC ETO is a promising candidate for high-frequency, high-voltage power conversion applications, and additional developments to optimize the device for higher voltage (>5 kV and higher frequency (10 kHz are needed.

Process planning optimization on turning machine tool using a hybrid genetic algorithm with local search approach

Directory of Open Access Journals (Sweden)

Yuliang Su

2015-04-01

Full Text Available A turning machine tool is a kind of new type of machine tool that is equipped with more than one spindle and turret. The distinctive simultaneous and parallel processing abilities of turning machine tool increase the complexity of process planning. The operations would not only be sequenced and satisfy precedence constraints, but also should be scheduled with multiple objectives such as minimizing machining cost, maximizing utilization of turning machine tool, and so on. To solve this problem, a hybrid genetic algorithm was proposed to generate optimal process plans based on a mixed 0-1 integer programming model. An operation precedence graph is used to represent precedence constraints and help generate a feasible initial population of hybrid genetic algorithm. Encoding strategy based on data structure was developed to represent process plans digitally in order to form the solution space. In addition, a local search approach for optimizing the assignments of available turrets would be added to incorporate scheduling with process planning. A real-world case is used to prove that the proposed approach could avoid infeasible solutions and effectively generate a global optimal process plan.

Recent developments in turning hardened steels - A review

Science.gov (United States)

Sivaraman, V.; Prakash, S.

2017-05-01

Hard materials ranging from HRC 45 - 68 such as hardened AISI H13, AISI 4340, AISI 52100, D2 STL, D3 STEEL Steel etc., need super hard tool materials to machine. Turning of these hard materials is termed as hard turning. Hard turning makes possible direct machining of the hard materials and also eliminates the lubricant requirement and thus favoring dry machining. Hard turning is a finish turning process and hence conventional grinding is not required. Development of the new advanced super hard tool materials such as ceramic inserts, Cubic Boron Nitride, Polycrystalline Cubic Boron Nitride etc. enabled the turning of these materials. PVD and CVD methods of coating have made easier the production of single and multi layered coated tool inserts. Coatings of TiN, TiAlN, TiC, Al2O3, AlCrN over cemented carbide inserts has lead to the machining of difficult to machine materials. Advancement in the process of hard machining paved way for better surface finish, long tool life, reduced tool wear, cutting force and cutting temperatures. Micro and Nano coated carbide inserts, nanocomposite coated PCBN inserts, micro and nano CBN coated carbide inserts and similar developments have made machining of hardened steels much easier and economical. In this paper, broad literature review on turning of hardened steels including optimizing process parameters, cooling requirements, different tool materials etc., are done.

REACHING THE COMPUTING HELP DESK

CERN Multimedia

Miguel MARQUINA; Roger WOOLNOUGH; IT/User Support

1999-01-01

The way to contact the Computing Help Desk (also known as 'UCO' and hosted by IT Division as an entry point for general computing issues) has been streamlined in order to facilitate access to it. A new telephone line and email address have been set: Phone number: 78888Email: Helpdesk@cern.chhopefully easier to remember. Both entries are operational since last December. The previous number and email address remain valid and have been turned into aliases of the above. However we encourage using the latter at your convenience from now on. For additional information please see the article published at the CERN Computing Newsletter 233:http://consult.cern.ch/cnl/233/art_uco.htmlDo not hesitate to contact us (by email to User.Relations@cern.ch) for additional information or feedback regarding this matter.Nicole Cremel, Miguel Marquina, Roger WoolnoughIT/UserSupport

First turn simulations in the cooler synchrotron COSY

International Nuclear Information System (INIS)

Dinev, D.

1991-07-01

This paper is devoted to the first turn correction and related problems in particle accelerators of synchrotron type. The paper consists of two parts. The first part is a survey of the existing methods for first turn steering. The second part is entirely devoted to the first turn in the cooler synchrotron COSY which is under assembling in KFA-Julich, Germany. (orig.)

First turn around strategy for RHIC

International Nuclear Information System (INIS)

Milutinovic, J.; Ruggiero, A.G.

1991-01-01

The authors present a strategy for achieving the so-called first turn around in RHIC. The strategy is based on the same method proposed to correct a distorted closed orbit in RHIC, i.e. on a generalization of the local three-bump method. They found out that the method is very effective in passing the beam through a non-ideal, insufficiently known, machine. The perturbed lattice was generated by the code PATRIS, which was also adapted to control the newly developed software. In ten distributions of errors the software was capable of passing the beam through in 2-3 injection attempts, at full sextupole strength. It was also determined that once the beam makes the first turn around and all the correctors are energized, it stays in the machine for at least several hundred turns

Compensatory help-seeking in young and older adults: does seeking help, help?

Science.gov (United States)

Alea, Nicole; Cunningham, Walter R

2003-01-01

Asking other people for help is a compensatory behavior that may be useful across the life span to enhance functioning. Seventy-two older and younger men and women were either allowed to ask for help or were not allowed to ask for help while solving reasoning problems. Although the older adults answered fewer problems correctly, they did not seek additional help to compensate for their lower levels of performance. Younger adults sought more help. There were no age differences, however, in the types of help sought: indirect help (e.g., hints) was sought more often than direct help (e.g., asking for the answer). Exploratory analyses revealed that one's ability level was a better indicator than age of the utility of help-seeking. Findings are interpreted in the context of social and task-related influences on the use of help-seeking as a compensatory behavior across the life span.

Performance improvement studies for cutting tools with perforated surface in turning of titanium alloy

Directory of Open Access Journals (Sweden)

Charitha Rao

2018-01-01

Full Text Available In turning process, the cutting tool is essential for shaping materials. The cutting tools with various perforated surfaces help to increase the cutting tool life. Also, advances in CNC machining technologies have enhanced the productivity of machining process. One of the best or futuristic approaches in modern manufacturing engineering is the use of FEM Simulation for the metal cutting process. FEM simulation helps in understanding the metal deformation process and also helps in the reduction of experiments. The simulation helps the researchers to predict the major influencing cutting variable values without carrying out any experiment which is time-consuming and expensive. This research presents the simulation study of the performance of micro-hole patterned Polycrystalline Diamond cutting insert in machining Titanium alloy (Ti-6Al-4V. Micro-holes are drilled using Electrical Discharge Wire Drilling machine on the rake face of Polycrystalline Diamond (PCD cutting inserts. FEM analysis is carried out to evaluate the effect of perforations on the mechanical integrity of insert. The micro-hole patterned insert is modeled in PRO-E modeler and simulated using DEFORM-3D software. The effective stress, strain, and temperature distribution are analyzed and the results are compared with the normal insert.

Synthesis of conformationally restricted beta-turn mimics

NARCIS (Netherlands)

IJsselstijn, M.

2006-01-01

This thesis aims at developing methods for introducing conformational restriction in Beta-turns, the turn elements present in Beta-sheets. A conformationally restricted peptide might either be formed via incorporation of a bridging diamino acids in a growing peptide chain, or via covalent bond

Turn key contracts

International Nuclear Information System (INIS)

Feretic, D.

1975-01-01

The aim of this summary is to point out some specific areas which have to be covered in a turn-key contract and which are of primarily interest to the buyer of a nuclear plant. It will be assumed that the buyer is utility company in a developing country and a plant supplier a company in an industrial country. (orig./FW) [de

Salted neutrinos our favourite seasoning is helping to solve a great cosmic mystery

CERN Multimedia

Chown, M

2001-01-01

Underground salt domes could be the neutrino detectors of the future and help scientists to understand where high-energy cosmic rays originate. Neutrinos are extremely difficult to detect because they rarely interact with matter. Inside salt crystals though, neutrinos will occasionally strike an atomic nucleus and produce a shower of charged particles which in turn produces an intense burst of radio waves (1/2 page).

Stepping in Place While Voluntarily Turning Around Produces a Long-Lasting Posteffect Consisting in Inadvertent Turning While Stepping Eyes Closed

Directory of Open Access Journals (Sweden)

Stefania Sozzi

2016-01-01

Full Text Available Training subjects to step in place on a rotating platform while maintaining a fixed body orientation in space produces a posteffect consisting in inadvertent turning around while stepping in place eyes closed (podokinetic after-rotation, PKAR. We tested the hypothesis that voluntary turning around while stepping in place also produces a posteffect similar to PKAR. Sixteen subjects performed 12 min of voluntary turning while stepping around their vertical axis eyes closed and 12 min of stepping in place eyes open on the center of a platform rotating at 60°/s (pretests. Then, subjects continued stepping in place eyes closed for at least 10 min (posteffect. We recorded the positions of markers fixed to head, shoulder, and feet. The posteffect of voluntary turning shared all features of PKAR. Time decay of angular velocity, stepping cadence, head acceleration, and ratio of angular velocity after to angular velocity before were similar between both protocols. Both postrotations took place inadvertently. The posteffects are possibly dependent on the repeated voluntary contraction of leg and foot intrarotating pelvic muscles that rotate the trunk over the stance foot, a synergy common to both protocols. We propose that stepping in place and voluntary turning can be a scheme ancillary to the rotating platform for training body segment coordination in patients with impairment of turning synergies of various origin.

Train turn restrictions and line plan performance

DEFF Research Database (Denmark)

Burggraeve, Sofie; Bull, Simon Henry; Lusby, Richard Martin

In this paper we study the impact of the `turn conditions' in end stations on the performance of a line plan. If trains have to turn on their platform in an end station, the yoccupy the platform for several minutes. A more preferred option, from a timetabling point of view, would be that a train...... in a exible and large enough shunt. Starting from a given line plan, we compare two timetables, one where trains have to turn on their platform and one where trains can turn in a shunt. We evaluate the impact on the performance of the line plan by its feasibility for timetabling,the minimum overall buffer...... disappears from the platform in its end station after dwelling and only appears again when departing for a subsequent trip. In this case, the train will not interfere with other trains that dwell on the platform during the time between these events. However, this option is only possible if the train can stay...

Derrida’s Turn to Franciscan Philosophy

Directory of Open Access Journals (Sweden)

Marko Zlomislic

2008-12-01

Full Text Available Contemporary French philosophers such as Levinas, Bataille, and Derrida, along with the existentialists Kierkegaard and Nietzsche have all made use of Franciscan insights in order to safeguard the ipseity that cannot be reduced or totalized. In keeping with the taste that concerns me, this paper will examine Derrida’s turn to the poetry of Gerard Manley Hopkins and how such a turn may place Derrida within a catholic and Franciscan tradition.

A streamlined risk screening method for managing reutilization of abandoned factories in Taiwan

Directory of Open Access Journals (Sweden)

I-Chun Chen

2017-05-01

Full Text Available An integrated management strategy that considers the competing relationships between land values and associated risks in the process of land-use conversion is needed to assess and manage the reutilization of brownfields. However, the often large number of individual brownfields renders it difficult to conduct a completed risk assessment for all sites, and a streamlined risk screening method would facilitate prioritization of the redevelopment of those factories. This methodology takes into account the spatial heterogeneity of contaminated lands and produces risk mapping that compiles complex risk-related information. Using abandoned factories in Taiwan as a case study, the method considers 40 points (50% accumulated probability as the threshold of acceptable risk. Emergency risk should be over 90% of accumulated probability. For the sustainability of brownfield reutilization in Taiwan, this research uses a risk matrix to identify the low, middle, and high risk for brownfield reutilization. It can indicate zones with a high risk level or low economic incentive as areas of concern for future decision making. In Taiwan, high-risk sites with high incentive account for only 21.3% of the sites. In contrast, the sites with the lowest incentive and low risk account for 57.6% of the sites. To avoid failure in the brownfield market, three strategies are suggested: (1 flexible land management with urban planning is a feasible option for protecting the receptor's health; (2 the government could provide the tool or brownfield funds to reduce the uncertainty of investment risk; and (3 risk monitoring and management can reduce the possible pitfalls associated with brownfield reutilization.

performance characteristics of a cam turning attachment

African Journals Online (AJOL)

Dr Obe

ABSTRACT. A modification of a cylindrical turning unit has been done to give a non- cylindrical turning attachment for production of irregular shapes, like cams on the lathe machine. To assess the performance of the attachment, cutting forces have been measured using a 'Sigma' Cutting Tool. Dynamometer. Furthermore ...

Turn over management and optimization of Shangdong nuclear power plant

International Nuclear Information System (INIS)

Zheng Tong

2014-01-01

After the equipments' installation is completed, the system will carry out commissioning tests. After commissioning work is completed, the system will be transferred to temporary operation. The plant buildings and structures will be transferred to operation for management and maintenance after civil work. The turn over work is an important part of the transfer from construction to operation. The article describes the significance of the nuclear power plant turn over work, turn over organization and management mode, the workflow of system turn over from construction to commissioning (TOP), turn over form commissioning to operation (TOTO), house hand over (HHO), building hand over (BHO) of Shandong Haiyang nuclear power plant, and analyze the current lack and future improvements of turn over work. Shandong Haiyang nuclear power plant will usher in the peak period of turn over work in 2013, fully aware of the importance of the turn over work, will play a key role in the long-term stable operation of the unit. (author)

Hatchability of chicken eggs as influenced by turning frequency in ...

African Journals Online (AJOL)

An experiment was conducted to determine the influence of turning frequency of chicken eggs on hatchability in hurricane lantern incubator. There were four treatments in which eggs were not turned in treatment one (control), those in treatment two were turned once daily (morning), treatment three turned twice daily ...

Precision lens assembly with alignment turning system

Science.gov (United States)

Ho, Cheng-Fang; Huang, Chien-Yao; Lin, Yi-Hao; Kuo, Hui-Jean; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Chen, Fong-Zhi

2017-10-01

The poker chip assembly with high precision lens barrels is widely applied to ultra-high performance optical system. ITRC applies the poker chip assembly technology to the high numerical aperture objective lenses and lithography projection lenses because of its high efficiency assembly process. In order to achieve high precision lens cell for poker chip assembly, an alignment turning system (ATS) is developed. The ATS includes measurement, alignment and turning modules. The measurement module is equipped with a non-contact displacement sensor (NCDS) and an autocollimator (ACM). The NCDS and ACM are used to measure centration errors of the top and the bottom surface of a lens respectively; then the amount of adjustment of displacement and tilt with respect to the rotational axis of the turning machine for the alignment module can be determined. After measurement, alignment and turning processes on the ATS, the centration error of a lens cell with 200 mm in diameter can be controlled within 10 arcsec. Furthermore, a poker chip assembly lens cell with three sub-cells is demonstrated, each sub-cells are measured and accomplished with alignment and turning processes. The lens assembly test for five times by each three technicians; the average transmission centration error of assembly lens is 12.45 arcsec. The results show that ATS can achieve high assembly efficiency for precision optical systems.

Structural and sequence features of two residue turns in beta-hairpins.

Science.gov (United States)

Madan, Bharat; Seo, Sung Yong; Lee, Sun-Gu

2014-09-01

Beta-turns in beta-hairpins have been implicated as important sites in protein folding. In particular, two residue β-turns, the most abundant connecting elements in beta-hairpins, have been a major target for engineering protein stability and folding. In this study, we attempted to investigate and update the structural and sequence properties of two residue turns in beta-hairpins with a large data set. For this, 3977 beta-turns were extracted from 2394 nonhomologous protein chains and analyzed. First, the distribution, dihedral angles and twists of two residue turn types were determined, and compared with previous data. The trend of turn type occurrence and most structural features of the turn types were similar to previous results, but for the first time Type II turns in beta-hairpins were identified. Second, sequence motifs for the turn types were devised based on amino acid positional potentials of two-residue turns, and their distributions were examined. From this study, we could identify code-like sequence motifs for the two residue beta-turn types. Finally, structural and sequence properties of beta-strands in the beta-hairpins were analyzed, which revealed that the beta-strands showed no specific sequence and structural patterns for turn types. The analytical results in this study are expected to be a reference in the engineering or design of beta-hairpin turn structures and sequences. © 2014 Wiley Periodicals, Inc.

Diamond turning machine controller implementation

Energy Technology Data Exchange (ETDEWEB)

Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

1988-12-01

The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

Hatchability of chicken eggs as influenced by turning frequency in ...

African Journals Online (AJOL)

STORAGESEVER

2008-12-03

Dec 3, 2008 ... Brake (2004) confirmed that absence of turning resulted in presentation of the head in the small end of the egg. Egg turning facilitated the transfer of yolk nutrients to the embryo via the sub-embryonic fluid (Deeming, 1989a). With modern incubators, automatic turning devices allow the eggs to be turned on ...

The Effect of a Textured Insole on Symmetry of Turning

Directory of Open Access Journals (Sweden)

Etem Curuk

2018-01-01

Full Text Available Turning while walking is a common daily activity. Individuals with unilateral impairment frequently perform turns asymmetrically. The purpose of the study was to investigate the effect of a discomfort-inducing textured insole on symmetry of turning. Nine healthy individuals performed turns to the right while walking with no insole, immediately after the insole was inserted in the right shoe, and after walking for six minutes with the insole. The duration of turning, displacements of pelvic markers, and perceived level of discomfort were evaluated. Utilizing the insole was associated with the increased level of perceived discomfort (p<0.05. Moreover, using the insole was linked to changes in the displacement of two pelvic markers and larger asymmetry index while turning immediately after the insole was inserted in the right shoe as compared to no insole condition (p<0.05. The duration of right turning increased immediately after the insole was inserted (p<0.05 and after walking with the insole for six minutes. The results indicate that the textured insole creates asymmetry of turning in healthy individuals. The outcome provides a background for future studies focused on using a textured insole to minimize the asymmetry of turning commonly seen in individuals with unilateral impairment.

Assessing Contractor Capabilities for Streamlined Site Investigations

Science.gov (United States)

The purpose of this document is to familiarize and encourage brownfields decision makers to investigate and employ innovative methods for characterizing their sites, to assist brownfields decision makers in assessing contractors' capabilities.

Characteristics of turn signal use at intersections in baseline naturalistic driving.

Science.gov (United States)

Sullivan, John M; Bao, Shan; Goudy, Roy; Konet, Heather

2015-01-01

The purpose of this study was to determine whether a driver's use of turn signals is sufficiently reliable to forecast a vehicle's future path around an intersection, when detailed information about the intersection is unavailable. Naturalistic observations of turn signal use among 108 drivers on surface streets were extracted from the baseline portion of a field operational test of a safety system. Left and right turns that resulted in heading changes of between 70 and 110° and turn radii between 18 and 90 m were selected from the dataset. The odds that a driver would signal a turn were modeled as a function of road type, turn direction, presence of a forward vehicle, whether the vehicle stopped before the turn, and driver age and gender. Overall, 25 percent of left turns and 29 percent of right turns were not signaled. Road type, turn direction, and presence of a forward vehicle were found to influence the odds that a turn is signaled, while gender and age of the driver did not. The results suggest that situational factors like road type and turn direction are more powerful predictors of whether a turn will be signaled than either age or gender. Signaling on major and minor surface roads was about 5 times more likely than on local roads and 1.5 times more likely when a forward vehicle was present, suggesting a possible effect of traffic volume. It was concluded that turn signal activation alone may be insufficiently reliable to forecast a driver's path. Copyright © 2014 Elsevier Ltd. All rights reserved.

Diamond turning of Si and Ge single crystals

Energy Technology Data Exchange (ETDEWEB)

Blake, P.; Scattergood, R.O.

1988-12-01

Single-point diamond turning studies have been completed on Si and Ge crystals. A new process model was developed for diamond turning which is based on a critical depth of cut for plastic flow-to-brittle fracture transitions. This concept, when combined with the actual machining geometry for single-point turning, predicts that {open_quotes}ductile{close_quotes} machining is a combined action of plasticity and fracture. Interrupted cutting experiments also provide a meant to directly measure the critical depth parameter for given machining conditions.

Turning is an important marker of balance confidence and walking limitation in persons with multiple sclerosis.

Directory of Open Access Journals (Sweden)

Gautam Adusumilli

Full Text Available The standard functional tool for gait assessment in multiple sclerosis (MS clinical trials has been the 25-Foot Timed Walk Test, a measure of gait speed. Straight-line gait assessment may not reflect adequately upon balance and coordination. Walking tests with turns may add additional information towards understanding gait and balance status, and be more reflective of ambulation in the community. Understanding the impact of turn parameters on patient-reported outcomes of balance and walking would help MS clinicians better formulate treatment plans for persons with gait limitations. In this study, ninety-one persons with MS (Expanded Disability Status Score; EDSS, range: 0-6.5 were enrolled in an initial cross-sectional study. Twenty-four subjects (EDSS, range:1.0-6.0 completed a follow-up visit an average of 12 months later. Spatiotemporal gait analysis was collected at both visits using APDM Opal wireless body-worn sensors while performing the Timed-Up-and-Go (TUG and 6-Minute Walk Test (6MWT. For both cross-sectional and longitudinal data, regression analyses determined the impact on the addition of turning parameters to stride velocity (SV, in the prediction of self-reported balance confidence (Activities-Specific Balance Confidence Scale (ABC and walking limitation (12-item Multiple Sclerosis Walking Scale (MSWS-12. The addition of 6MWT peak turn velocity (PTV to 6MWT SV increased the predictive power of the 6MWT for the ABC from 20% to 33%, and increased the predictive power from 28% to 41% for the MSWS-12. TUG PTV added to TUG SV also strengthened the relationship of the TUG for the ABC from 19% to 28%, and 27% to 36% for the MSWS-12. For those with 1 year follow-up, percent change in turn number of steps (TNS%Δ during the 6MWT added to 6MWT SV%Δ improved the modeling of ABC%Δ from 24% to 33%. 6MWT PTV%Δ added to 6MWT SV%Δ increased the predictive power of MSWS-12%Δ from 8% to 27%. Conclusively, turn parameters improved modeling of

ω-Turn: a novel β-turn mimic in globular proteins stabilized by main-chain to side-chain C−H···O interaction.

Science.gov (United States)

Dhar, Jesmita; Chakrabarti, Pinak; Saini, Harpreet; Raghava, Gajendra Pal Singh; Kishore, Raghuvansh

2015-02-01

Mimicry of structural motifs is a common feature in proteins. The 10-membered hydrogen-bonded ring involving the main-chain C − O in a β-turn can be formed using a side-chain carbonyl group leading to Asx-turn. We show that the N − H component of hydrogen bond can be replaced by a C(γ) -H group in the side chain, culminating in a nonconventional C − H···O interaction. Because of its shape this β-turn mimic is designated as ω-turn, which is found to occur ∼ three times per 100 residues. Three residues (i to i + 2) constitute the turn with the C − H···O interaction occurring between the terminal residues, constraining the torsion angles ϕi + 1, ψi + 1, ϕi + 2 and χ'1(i + 2) (using the interacting C(γ) atom). Based on these angles there are two types of ω-turns, each of which can be further divided into two groups. C(β) -branched side-chains, and Met and Gln have high propensities to occur at i + 2; for the last two residues the carbonyl oxygen may participate in an additional interaction involving the S and amino group, respectively. With Cys occupying the i + 1 position, such turns are found in the metal-binding sites. N-linked glycosylation occurs at the consensus pattern Asn-Xaa-Ser/Thr; with Thr at i + 2, the sequence can adopt the secondary structure of a ω-turn, which may be the recognition site for protein modification. Location between two β-strands is the most common occurrence in protein tertiary structure, and being generally exposed ω-turn may constitute the antigenic determinant site. It is a stable scaffold and may be used in protein engineering and peptide design. © 2014 Wiley Periodicals, Inc.

Beam polarization during a Siberian snake turn-on

International Nuclear Information System (INIS)

Anferov, Vladimir A.

1999-01-01

Installing Siberian snakes in a circular proton accelerator allows one to overcome all spin depolarizing resonances even at very high energies. However, Siberian snake application at low energies is technically rather difficult. Turning snake on at some energy during acceleration would allow using Siberian snakes even in rings with low injection energies. It is shown that the beam polarization would be preserved during the snake ramp, provided that the snake is turned on in more than ten turns, and the energy is set near a half-integer Gγ

A mediation model of professional psychological help seeking for suicide ideation among Asian American and white American college students.

Science.gov (United States)

Wong, Joel; Brownson, Chris; Rutkowski, Leslie; Nguyen, Chi P; Becker, Marty Swanbrow

2014-01-01

This study examined professional psychological help seeking among 1,045 white American and Asian American students from 70 U.S. colleges and universities who had seriously considered attempting suicide. The authors found that Asian American college students had lower rates of professional psychological help seeking for their suicide ideation than White American college students. Guided by social network perspectives on professional psychological help seeking, the authors also tested mediators of this racial disparity. Relative to white Americans, Asian Americans were advised by fewer people (especially fewer family members) to seek professional help, which was, in turn, associated with lower rates of professional psychological help seeking for suicide ideation. These findings underscore the importance of gatekeeping as a suicide prevention strategy for Asian American college students.

First turn around strategy for RHIC

International Nuclear Information System (INIS)

Milutinovic, J.; Ruggiero, A.G.

1991-06-01

We present a strategy for achieving the so-called first turn around in RHIC. The strategy is based on the same method we had proposed to correct a distorted closed orbit in RHIC, i.e., on a generalization of the local three-bump method. We found out that the method is very effective in passing the beam through a non-ideal, insufficiently known, machine. We tested that software on ten different Gaussian distributions of dominant orbit distorting lattice imperfections. The perturbed lattice was generated by the code PATRIS, which was also adapted to control the newly developed software. In all of the ten distributions the software was capable of passing the beam through in 2--3 injection attempts, at full sextupole strength. It was also determined that once the beam makes the first turn around and all the correctors are energized, it stays in the machine for at least several hundred turns that we had checked. The quality of the orbit, that was established in this way, was also found to be very good, i.e., the residual distortions at the places of large beta function were much less than one millimeter. With one or two monitors/correctors broken, the software established a first turn around without any extra difficulties. The quality of such orbit was, of course, somewhat degraded, especially around the broken devices. It was also observed that, in the process of actual closing, the beam develops free betatron oscillations in the amplitude range of 1--5 mm, which can be reduced either by changing the injection conditions to better match the actual closed orbit or by an appropriate damping device. The hardware proposed for RHIC is more than sufficient to meet the demands of the first turn controlling software. The maximum kick angle to be applied to the beam would require less than 2/3 of the corrector's top strength even at the top magnetic rigidity Bρ = 850 T·m, which means that the correctors will be performing an easy task at injection

Medium dependent dual turn on/turn off fluorescence sensing for Cu2 + ions using AMI/SDS assemblies

Science.gov (United States)

Gujar, Varsha B.; Ottoor, Divya

2017-02-01

Behavior of Amiloride (AMI) as a metal ion sensor in anionic surfactant assemblies of varying concentrations at different pH is depicted in this work. From a non-sensor fluorophore, AMI has been transformed in to a tunable fluorosensor for Cu2 + ions in various SDS concentrations. At premicellar concentration of SDS, ion-pair complex is expected to be formed between AMI and SDS due to electrostatic interactions between them. However at CMC concentrations of SDS, fluorescence intensity of AMI is greatly enhanced with red shift in emission, due to the incorporation of AMI molecule in the hydrophobic micellar interface. The behavior of metal sensing by AMI-SDS assemblies gives rise to several interesting observations. Micellation of SDS has been greatly enhanced by increasing copper ion concentrations, as these counter ions screens the charge on monomers of SDS which lead to the aggregation at premicellar concentrations only. Concentrations and pH dependent discrete trends of interactions between SDS-AMI and SDS-Cu2 + ions, have given tunable fluorescence responses (fluorescence turn on/turn off) of AMI for added Cu2 + ions. The electrostatic interaction between the metal cations and the anionic surfactants is the driving force for bringing the metal ions near to the vicinity of micelle where AMI resides. Thus, a comprehensive understanding of the mechanism related to the 'turn on-turn off' fluorescence response of AMI with respect to pH and SDS concentration for effective Cu2 + ion sensing is illustrated in this work.

Reconceptualizing Autonomy: A Relational Turn in Bioethics.

Science.gov (United States)

Jennings, Bruce

2016-05-01

History's judgment on the success of bioethics will not depend solely on the conceptual creativity and innovation in the field at the level of ethical and political theory, but this intellectual work is not insignificant. One important new development is what I shall refer to as the relational turn in bioethics. This development represents a renewed emphasis on the ideographic approach, which interprets the meaning of right and wrong in human actions as they are inscribed in social and cultural practices and in structures of lived meaning and interdependence; in an ideographic approach, the task of bioethics is to bring practice into theory, not the other way around. The relational turn in bioethics may profoundly affect the critical questions that the field asks and the ethical guidance it offers society, politics, and policy. The relational turn provides a way of correcting the excessive atomism of many individualistic perspectives that have been, and continue to be, influential in bioethics. Nonetheless, I would argue that most of the work reflecting the relational turn remains distinctively liberal in its respect for the ethical significance of the human individual. It moves away from individualism, but not from the value of individuality.In this review essay, I shall focus on how the relational turn has manifested itself in work on core concepts in bioethics, especially liberty and autonomy. Following a general review, I conclude with a brief consideration of two important recent books in this area: Jennifer Nedelsky's Law's Relations and Rachel Haliburton's Autonomy and the Situated Self. © 2016 The Hastings Center.

Simulation of turn-by-turn passage of protons through the H-minus stripping foil in booster

Energy Technology Data Exchange (ETDEWEB)

Gardner, C. [Brookhaven National Lab. (BNL), Upton, NY (United States)

2017-07-06

Equations for transverse emittance growth due to multiple passes of circulating proton beam through the H-minus stripping foil in Booster were developed in [1]. These were based on simple principles of statistics and simple assumptions about the initial distribution of particles incident on the foil. It was assumed there that the foil dimensions and position of the incoming beam are such that all particles hit the foil on every turn around the machine. In the present note we assume only that all incoming H-minus ions from Linac hit the foil and are stripped of their electrons. The resulting protons circulate indefinitely around the machine. Setups in which the foil width is reduced so that not all protons hit the foil on every turn are studied here by simulation. The aim is to determine the effectiveness of such setups in reducing the emittance growth of circulating proton beam during the injection of H-minus beam. The simulations also serve as a check of the equations developed in [1], and vice versa. The particulars of the simulation setup are given in Sections 1 through 11. Figures 1 through 12 show simulation results for the case in which all particles hit the foil on every turn. The results are in good agreement with those obtained from the equations of reference [1]. Figures 13 through 19 show simulation results for various setups in which the foil width is reduced. These results are summarized in Section 12. In all gures the horizontal axis gives the turn number. The unit of the vertical axis is micrometers ( m) in all plots of emittance.

Is It Cheating or Learning the Craft of Writing? Using Turnitin to Help Students Avoid Plagiarism

Science.gov (United States)

Graham-Matheson, Lynne; Starr, Simon

2013-01-01

Plagiarism is a growing problem for universities, many of which are turning to software detection for help in detecting and dealing with it. This paper explores issues around plagiarism and reports on a study of the use of Turnitin in a new university. The purpose of the study was to inform the senior management team about the plagiarism policy…

Postural hemodynamic changes after turning to prone position

Directory of Open Access Journals (Sweden)

Микола Віталійович Лизогуб

2015-03-01

Full Text Available Background of study. Prone position is one of the most complex positions for anesthesiologist as it is accompanied by several physiological changes that can lead to specific complications. Hemodynamic changes are most controversial.Aim of study was to establish hemodynamic changes in non-anaesthetized patients in prone position depending on body mass index.Material and methods. We examined central hemodynamics in 40 patients the day before surgery using thoracic rheography in supine position, in prone position 5 min after turning and in prone position 20 min after turning. Patients were divided into 2 groups according to body mass index (18-25 and 26-35.Results. Patients with normal body weight did not have any hemodynamic changes after turning to prone position. Patients with increased body weight had higher cardiac index. After turning to prone position obese patients’ cardiac output and cardiac index reduced 22% comparing with supine position. After 20 min in prone position these hemodynamic parameters were found to be reduced to the same level.Conclusion. Significant hemodynamic changes after turning from supine to prone position were revealed only in patients with increased body mass index. In these patients cardiac index in prone position was reduced by 22% comparing to supine position

1.06 μm 150 psec laser damage study of diamond turned, diamond turned/polished and polished metal mirrors

International Nuclear Information System (INIS)

Saito, T.T.; Milam, D.; Baker, P.; Murphy, G.

1975-01-01

Using a well characterized 1.06 μm 150 ps glass laser pulse the damage characteristics for diamond turned, diamond turned/ polished, and polished copper and silver mirrors less than 5 cm diameter were studied. Although most samples were tested with a normal angle of incidence, some were tested at 45 0 with different linear polarization showing an increase in damage threshold for S polarization. Different damage mechanisms observed will be discussed. Laser damage is related to residual surface influences of the fabrication process. First attempts to polish diamond turned surfaces resulted in a significant decrease in laser damage threshold. The importance of including the heat of fusion in the one dimensional heat analysis of the theoretical damage threshold and how close the samples came to the theoretical damage threshold is discussed. (auth)

Turning around Newton's Second Law

Science.gov (United States)

Goff, John Eric

2004-01-01

Conceptual and quantitative difficulties surrounding Newton's second law often arise among introductory physics students. Simply turning around how one expresses Newton's second law may assist students in their understanding of a deceptively simple-looking equation.

Alternative Fuels Data Center: Central Ohio Turns Trash Into Natural Gas

Science.gov (United States)

Central Ohio Turns Trash Into Natural Gas to someone by E-mail Share Alternative Fuels Data Center : Central Ohio Turns Trash Into Natural Gas on Facebook Tweet about Alternative Fuels Data Center: Central Ohio Turns Trash Into Natural Gas on Twitter Bookmark Alternative Fuels Data Center: Central Ohio Turns

Experimental investigation on hard turning of AISI 4340 steel using cemented coated carbide insert

Science.gov (United States)

Pradeep Kumar, J.; Kishore, K. P.; Ranjith Kumar, M.; Saran Karthick, K. R.; Vishnu Gowtham, S.

2018-02-01

Hard turning is a developing technology that offers many potential advantages compared to grinding, which remains the standard finishing process for critical hardened surfaces. In this work, an attempt has been made to experimentally investigate hard turning of AISI 4340 steel under wet and dry condition using cemented coated carbide insert. Hardness of the workpiece material is tested using Brinell and Rockwell hardness testers. CNC LATHE and cemented coated carbide inserts of designation CNMG 120408 are used for conducting experimental trials. Significant cutting parameters like cutting speed, feed rate and depth of cut are considered as controllable input parameters and surface roughness (Ra), tool wear are considered as output response parameters. Design of experiments is carried out with the help of Taguchi’s L9 orthogonal array. Results of response parameters like surface roughness and tool wear under wet and dry condition are analysed. It is found that surface roughness and tool wear are higher under dry machining condition when compared to wet machining condition. Feed rate significantly influences the surface roughness followed by cutting speed. Depth of cut significantly influences the tool wear followed by cutting speed.

The spatial turn and the scenario approach in flood risk management—Implementing the European Floods Directive in the Netherlands

Directory of Open Access Journals (Sweden)

Leon J. van Ruiten

2016-10-01

Full Text Available The European Floods Directive requires member states to prepare flood risk management plans for their river catchments. The first generation of those plans was just developed at the end of 2015; the next revision is due in 2021. The new instrument institutionalizes an ongoing paradigm shift from flood protection to flood risk management in Europe. It implies two major governance challenges: the spatial turn and the scenario approach. This contribution studies the implementation of these two governance challenges in the Netherlands, where the paradigm shift is considered to be advanced. Therefore, the spatial turn and the scenario approach are operationalized. The spatial turn consists of three aspects: space for the river, an integrated approach, and beyond structural measures. The scenario approach introduces the vulnerability of society in flood risk management. It is discussed how the challenges of spatial turn and the scenario approach—and thus the shift towards flood risk management—have an effect on the prevailing modes of governance in water management in the Netherlands. This helps understand the tensions and frictions with implementing the plans, but also illustrates how the European Floods Directive institutionalizes the shift towards flood risk management. The analytical scheme, consists mainly of operationalization, can foster future comparative studies with other countries and over time, to trace the changes in approaches to flood risks in Europe.

Minimum-fuel turning climbout and descent guidance of transport jets

Science.gov (United States)

Neuman, F.; Kreindler, E.

1983-01-01

The complete flightpath optimization problem for minimum fuel consumption from takeoff to landing including the initial and final turns from and to the runway heading is solved. However, only the initial and final segments which contain the turns are treated, since the straight-line climbout, cruise, and descent problems have already been solved. The paths are derived by generating fields of extremals, using the necessary conditions of optimal control together with singular arcs and state constraints. Results show that the speed profiles for straight flight and turning flight are essentially identical except for the final horizontal accelerating or decelerating turns. The optimal turns require no abrupt maneuvers, and an approximation of the optimal turns could be easily integrated with present straight-line climb-cruise-descent fuel-optimization algorithms. Climbout at the optimal IAS rather than the 250-knot terminal-area speed limit would save 36 lb of fuel for the 727-100 aircraft.

Sequence-specific unusual (1-->2)-type helical turns in alpha/beta-hybrid peptides.

Science.gov (United States)

Prabhakaran, Panchami; Kale, Sangram S; Puranik, Vedavati G; Rajamohanan, P R; Chetina, Olga; Howard, Judith A K; Hofmann, Hans-Jörg; Sanjayan, Gangadhar J

2008-12-31

This article describes novel conformationally ordered alpha/beta-hybrid peptides consisting of repeating l-proline-anthranilic acid building blocks. These oligomers adopt a compact, right-handed helical architecture determined by the intrinsic conformational preferences of the individual amino acid residues. The striking feature of these oligomers is their ability to display an unusual periodic pseudo beta-turn network of nine-membered hydrogen-bonded rings formed in the forward direction of the sequence by 1-->2 amino acid interactions both in solid-state and in solution. Conformational investigations of several of these oligomers by single-crystal X-ray diffraction, solution-state NMR, and ab initio MO theory suggest that the characteristic steric and dihedral angle restraints exerted by proline are essential for stabilizing the unusual pseudo beta-turn network found in these oligomers. Replacing proline by the conformationally flexible analogue alanine (Ala) or by the conformationally more constrained alpha-amino isobutyric acid (Aib) had an adverse effect on the stabilization of this structural architecture. These findings increase the potential to design novel secondary structure elements profiting from the steric and dihedral angle constraints of the amino acid constituents and help to augment the conformational space available for synthetic oligomer design with diverse backbone structures.

A turn-on supramolecular fluorescent probe for sensing benzimidazole fungicides and its application in living cell imaging

Science.gov (United States)

Tang, Qing; Zhang, Jing; Sun, Tao; Wang, Cheng-Hui; Huang, Ying; Zhou, Qingdi; Wei, Gang

2018-02-01

A cucurbit[8]uril-based turn-on supramolecular fluorescent probe between cucurbit[8]uril (Q[8]) and pyronine Y (PyY) (designated 2PyY@Q[8]) in acidic aqueous solution showed a remarkable fluorescence 'turn-on' response to benzimidazole fungicides such as thiabendazole, fuberidazole and carbendazim. The 2PyY@Q[8] fluorescent probe can be used to detect benzimidazole fungicides with high sensitivity and selectivity with a detection limit of 10- 8 mol/L. A good linear relationship of emission intensity at 580 nm for benzimidazole fungicides at concentrations of 0.4-5.0 μmol/L was observed. The proposed sensing mechanism was investigated using 1H NMR spectroscopy combined with density functional theory calculations at the B3LYP/6-31G(d) level. The cell imaging study showed that the 2PyY@Q[8] complex could be used to image benzimidazole fungicide in prostate cancer (PC3) cells, which may help to elucidate relevant biological processes at the molecular level.

Comparing different commercial zero valent iron nanoparticles to immobilize As and Hg in brownfield soil.

Science.gov (United States)

Gil-Díaz, M; Alonso, J; Rodríguez-Valdés, E; Gallego, J R; Lobo, M C

2017-04-15

Nanoscale zero valent iron (nZVI) particles obtained by different methods differ in their structure, which lead to different reactivity, and therefore a likely difference in the remediation efficiency. The present study compares the effectiveness of three commercial ZVI nanoparticles to immobilize As and Hg in two soils (A and B) collected from a brownfield highly contaminated by mining and metallurgy activities. Scarce data are available on the effectiveness of nZVI for Hg immobilization in soil. Two commercial nZVI slurries from Toda (RNIP and RNIP-D) and one from Nano Iron (25S) were used at different doses (1, 5 and 10%). The metal(loid) availability and mobility was evaluated with the TCLP test and Tessier extraction procedure. The influence of nZVI application on As and Hg speciation was also evaluated as well as its impact on soil pH, electrical conductivity and soil phytotoxicity to vetch germination. The three commercial nZVI particles significantly reduced As and Hg availability in the two soils studied, which led to a decrease in soil phytotoxicity. At the dose of 5% of nZVI a decrease of exchangeable-As higher than 70% was observed for both soils, whereas in the case of Hg, a higher dose of nZVI (10%) was necessary to achieve reductions of exchangeable-Hg between 63 and 90% depending on the type of nZVI and soil. No impact on soil pH and electrical conductivity was observed. The effectiveness of metal(loid) immobilization depended on type of nZVI, soil properties and metal(loid) characteristics. Nanoparticles from Nano Iron showed better results for As immobilization whereas RNIP nanoparticles were more effective for Hg. Overall, 25S at the dose of 5% resulted more effective than RNIP nanoparticles for the reduction of exchangeable-As (in the range of 6-14%), whereas RNIP and RNIP-D were 10 and 13% more effective, respectively, for the reduction of exchangeable-Hg at the dose of 10% in soil B. Thus, nZVI can be used for the remediation of highly As and

History of Education in Canada: Historiographic "Turns" and Widening Horizons

Science.gov (United States)

Bruno-Jofré, Rosa

2014-01-01

This paper explores major historiographic "turns" in history of education with a focus, although not exclusively, on English-speaking Canada. It addresses the transformative intellectual impact of the turn toward social history on the history of education, the impact of cultural history and the linguistic turn, the reception of Michel…

Turn-taking cue delays in human-robot communication

NARCIS (Netherlands)

Cuijpers, R. H.; Van Den Goor, V. J.P.

2017-01-01

Fluent communication between a human and a robot relies on the use of effective turn-taking cues. In human speech staying silent after a sequence of utterances is usually accompanied by an explicit turnyielding cue to signal the end of a turn. Here we study the effect of the timing of four

Human Rights Education and the Post Secular Turn

Science.gov (United States)

Bowie, Bob

2012-01-01

This article questions whether human rights education (HRE) scholarship is responding adequately to the post secular turn in thinking about the place and nature of religion in society. Here the post secular turn is used to describe the discrediting of secularisation theory, the recognition of religion as an enduring and pervasive global cultural…

Conflicts and cooperation in Dutch industrial area redevelopment projects : Application of conjoint analysis and game theory to model strategic decision making

NARCIS (Netherlands)

Blokhuis, E.G.J.; Schaefer, W.F.; Han, Q.; Malleson, N.; Olner, D.; Jordan, R.

2010-01-01

Redevelopment of brownfields is placed high on the political agendas in many countries. However, brownfield redevelopment projects are often problematic; the frequent occurrence of conflicts between involved and interdependent stakeholders is directly related to this. To date, tools are lacking to

Model-independent analysis of the Fermilab Tevatron turn-by-turn beam position monitor measurements

Science.gov (United States)

Petrenko, A. V.; Valishev, A. A.; Lebedev, V. A.

2011-09-01

Coherent transverse beam oscillations in the Tevatron were analyzed with the model-independent analysis (MIA) technique. This allowed one to obtain the model-independent values of coupled betatron amplitudes, phase advances, and dispersion function around the ring from a single dipole kick measurement. In order to solve the MIA mode mixing problem which limits the accuracy of determination of the optical functions, we have developed a new technique of rotational MIA mode untangling. The basic idea is to treat each beam position monitor (BPM) as two BPMs separated in a ring by exactly one turn. This leads to a simple criterion of MIA mode separation: the betatron phase advance between any BPM and its counterpart shifted by one turn should be equal to the betatron tune and therefore should not depend on the BPM position in the ring. Furthermore, we describe a MIA-based technique to locate vibrating magnets in a storage ring.

Model-independent analysis of the Fermilab Tevatron turn-by-turn beam position monitor measurements

Directory of Open Access Journals (Sweden)

A. V. Petrenko

2011-09-01

Full Text Available Coherent transverse beam oscillations in the Tevatron were analyzed with the model-independent analysis (MIA technique. This allowed one to obtain the model-independent values of coupled betatron amplitudes, phase advances, and dispersion function around the ring from a single dipole kick measurement. In order to solve the MIA mode mixing problem which limits the accuracy of determination of the optical functions, we have developed a new technique of rotational MIA mode untangling. The basic idea is to treat each beam position monitor (BPM as two BPMs separated in a ring by exactly one turn. This leads to a simple criterion of MIA mode separation: the betatron phase advance between any BPM and its counterpart shifted by one turn should be equal to the betatron tune and therefore should not depend on the BPM position in the ring. Furthermore, we describe a MIA-based technique to locate vibrating magnets in a storage ring.

Turning goals into results: the power of catalytic mechanisms.

Science.gov (United States)

Collins, J

1999-01-01

Most executives have a big, hairy, audacious goal. They write vision statements, formalize procedures, and develop complicated incentive programs--all in pursuit of that goal. In other words, with the best of intentions, they install layers of stultifying bureaucracy. But it doesn't have to be that way. In this article, Jim Collins introduces the catalytic mechanism, a simple yet powerful managerial tool that helps translate lofty aspirations into concrete reality. Catalytic mechanisms are the crucial link between objectives and performance; they are a galvanizing, nonbureaucratic means to turn one into the other. What's the difference between catalytic mechanisms and most traditional managerial controls? Catalytic mechanisms share five characteristics. First, they produce desired results in unpredictable ways. Second, they distribute power for the benefit of the overall system, often to the discomfort of those who traditionally hold power. Third, catalytic mechanisms have teeth. Fourth, they eject "viruses"--those people who don't share the company's core values. Finally, they produce an ongoing effect. Catalytic mechanisms are just as effective for reaching individual goals as they are for corporate ones. To illustrate how catalytic mechanisms work, the author draws on examples of individuals and organizations that have relied on such mechanisms to achieve their goals. The same catalytic mechanism that works in one organization, however, will not necessarily work in another. Catalytic mechanisms must be tailored to specific goals and situations. To help readers get started, the author offers some general principles that support the process of building catalytic mechanisms effectively.

Compensations for increased rotational inertia during human cutting turns.

Science.gov (United States)

Qiao, Mu; Brown, Brian; Jindrich, Devin L

2014-02-01

Locomotion in a complex environment is often not steady state, but unsteady locomotion (stability and maneuverability) is not well understood. We investigated the strategies used by humans to perform sidestep cutting turns when running. Previous studies have argued that because humans have small yaw rotational moments of inertia relative to body mass, deceleratory forces in the initial velocity direction that occur during the turning step, or 'braking' forces, could function to prevent body over-rotation during turns. We tested this hypothesis by increasing body rotational inertia and testing whether braking forces during stance decreased. We recorded ground reaction force and body kinematics from seven participants performing 45 deg sidestep cutting turns and straight running at five levels of body rotational inertia, with increases up to fourfold. Contrary to our prediction, braking forces remained consistent at different rotational inertias, facilitated by anticipatory changes to body rotational speed. Increasing inertia revealed that the opposing effects of several turning parameters, including rotation due to symmetrical anterior-posterior forces, result in a system that can compensate for fourfold changes in rotational inertia with less than 50% changes to rotational velocity. These results suggest that in submaximal effort turning, legged systems may be robust to changes in morphological parameters, and that compensations can involve relatively minor adjustments between steps to change initial stance conditions.

Characterization of jellyfish turning using 3D-PTV

Science.gov (United States)

Xu, Nicole; Dabiri, John

2017-11-01

Aurelia aurita are oblate, radially symmetric jellyfish that consist of a gelatinous bell and subumbrellar muscle ring, which contracts to provide motive force. Swimming is typically modeled as a purely vertical motion; however, asymmetric activations of swim pacemakers (sensory organs that innervate the muscle at eight locations around the bell margin) result in turning and more complicated swim behaviors. More recent studies have examined flow fields around turning jellyfish, but the input/output relationship between locomotive controls and swim trajectories is unclear. To address this, bell kinematics for both straight swimming and turning are obtained using 3D particle tracking velocimetry (3D-PTV) by injecting biocompatible elastomer tags into the bell, illuminating the tank with ultraviolet light, and tracking the resulting fluorescent particles in a multi-camera setup. By understanding these kinematics in both natural and externally controlled free-swimming animals, we can connect neuromuscular control mechanisms to existing flow measurements of jellyfish turning for applications in designing more energy efficient biohybrid robots and underwater vehicles. NSF GRFP.

Zigzag turning preference of freely crawling cells.

Directory of Open Access Journals (Sweden)

Taeseok Daniel Yang

Full Text Available The coordinated motion of a cell is fundamental to many important biological processes such as development, wound healing, and phagocytosis. For eukaryotic cells, such as amoebae or animal cells, the cell motility is based on crawling and involves a complex set of internal biochemical events. A recent study reported very interesting crawling behavior of single cell amoeba: in the absence of an external cue, free amoebae move randomly with a noisy, yet, discernible sequence of 'run-and-turns' analogous to the 'run-and-tumbles' of swimming bacteria. Interestingly, amoeboid trajectories favor zigzag turns. In other words, the cells bias their crawling by making a turn in the opposite direction to a previous turn. This property enhances the long range directional persistence of the moving trajectories. This study proposes that such a zigzag crawling behavior can be a general property of any crawling cells by demonstrating that 1 microglia, which are the immune cells of the brain, and 2 a simple rule-based model cell, which incorporates the actual biochemistry and mechanics behind cell crawling, both exhibit similar type of crawling behavior. Almost all legged animals walk by alternating their feet. Similarly, all crawling cells appear to move forward by alternating the direction of their movement, even though the regularity and degree of zigzag preference vary from one type to the other.

Effects of turning and through lane sharing on traffic performance at intersections

Science.gov (United States)

Li, Xiang; Sun, Jian-Qiao

2016-02-01

Turning vehicles strongly influence traffic flows at intersections. Effective regulation of turning vehicles is important to achieve better traffic performance. This paper studies the impact of lane sharing and turning signals on traffic performance at intersections by using cellular automata. Both right-turn and left-turn lane sharing are studied. Interactions between vehicles and pedestrians are considered. The transportation efficiency, road safety and energy economy are the traffic performance metrics. Extensive simulations are carried out to study the traffic performance indices. It is observed that shared turning lanes and permissive left-turn signal improve the transportation efficiency and reduce the fuel consumption in most cases, but the safety is usually sacrificed. It is not always beneficial for the through vehicles when they are allowed to be in the turning lanes.

Effect of cutting edge radius on surface roughness in diamond tool turning of transparent MgAl2O4 spinel ceramic

Science.gov (United States)

Yue, Xiaobin; Xu, Min; Du, Wenhao; Chu, Chong

2017-09-01

Transparent magnesium aluminate spinel (MgAl2O4) ceramic is one of an important optical materials. However, due to its pronounced hardness and brittleness, the optical machining of this material is very difficult. Diamond turning has advantages over the grinding process in flexibility and material removal rate. However, there is a lack of research that could support the use of diamond turning technology in the machining of MgAl2O4 spinel ceramic. Using brittle-ductile transition theory of brittle material machining, this work provides critical information that may help to realize ductile-regime turning of MgAl2O4 spinel ceramic. A characterization method of determination the cutting edge radius is introduced here. Suitable diamond tools were measured for sharpness and then chosen from a large number of candidate tools. The influence of rounded cutting edges on surface roughness of the MgAl2O4 spinel ceramic is also investigated. These results indicate that surface quality of MgAl2O4 spinel is relate to the radius of diamond tool's cutting edge, cutting speed, and feed rate. Sharp diamond tools (small radius of cutting edge) facilitated ductile-regime turning of MgAl2O4 spinel and shows great potential to reduce surface roughness and produce smoother final surface.

Phenomenology and the Empirical Turn

NARCIS (Netherlands)

Zwier, Jochem; Blok, Vincent; Lemmens, Pieter

2016-01-01

This paper provides a phenomenological analysis of postphenomenological philosophy of technology. While acknowledging that the results of its analyses are to be recognized as original, insightful, and valuable, we will argue that in its execution of the empirical turn, postphenomenology forfeits

Help Helps, but Only so Much: Research on Help Seeking with Intelligent Tutoring Systems

Science.gov (United States)

Aleven, Vincent; Roll, Ido; McLaren, Bruce M.; Koedinger, Kenneth R.

2016-01-01

Help seeking is an important process in self-regulated learning (SRL). It may influence learning with intelligent tutoring systems (ITSs), because many ITSs provide help, often at the student's request. The Help Tutor was a tutor agent that gave in-context, real-time feedback on students' help-seeking behavior, as they were learning with an ITS.…

Self-Concealment Mediates the Relationship Between Perfectionism and Attitudes Toward Seeking Psychological Help Among Adolescents.

Science.gov (United States)

Abdollahi, Abbas; Hosseinian, Simin; Beh-Pajooh, Ahmad; Carlbring, Per

2017-01-01

One of the biggest barriers in treating adolescents with mental health problems is their refusing to seek psychological help. This study was designed to examine the relationships between two forms of perfectionism, self-concealment and attitudes toward seeking psychological help and to test the mediating role of self-concealment in the relationship between perfectionism and attitudes toward seeking psychological help among Malaysian high school students. The participants were 475 Malaysian high school students from four high schools in Kuala Lumpur, Malaysia. Structural equation modelling results indicated that high school students with high levels of socially prescribed perfectionism, high levels of self-concealment, and low levels of self-oriented perfectionism reported negative attitudes toward seeking psychological help. Bootstrapping analysis showed that self-concealment emerged as a significant, full mediator in the link between socially prescribed perfectionism and attitudes toward seeking psychological help. Moderated mediation analysis also examined whether the results generalized across men and women. The results revealed that male students with socially prescribed perfectionism are more likely to engage in self-concealment, which in turn, leads to negative attitudes toward seeking psychological help more than their female counterparts. The results suggested that students high in socially prescribed perfectionism were more likely to engage in self-concealment and be less inclined to seek psychological help.

Transparent lattice characterization with gated turn-by-turn data of diagnostic bunch train

Science.gov (United States)

Li, Yongjun; Cheng, Weixing; Ha, Kiman; Rainer, Robert

2017-11-01

Methods of characterization of a storage ring's lattice have traditionally been intrusive to routine operations. More importantly, the lattice seen by particles can drift with the beam current due to collective effects. To circumvent this, we have developed a novel approach for dynamically characterizing a storage ring's lattice that is transparent to operations. Our approach adopts a dedicated filling pattern which has a short, separate diagnostic bunch train (DBT). Through the use of a bunch-by-bunch feedback system, the DBT can be selectively excited on demand. Gated functionality of a beam position monitor system is capable of collecting turn-by-turn data of the DBT, from which the lattice can then be characterized after excitation. As the DBT comprises only about one percent of the total operational bunches, the effects of its excitation are negligible to users. This approach allows us to localize the distributed quadrupolar wakefields generated in the storage ring vacuum chamber during beam accumulation. While effectively transparent to operations, our approach enables us to dynamically control the beta beat and phase beat, and unobtrusively optimize performance of the National Synchrotron Light Source-II accelerator during routine operations.

Density of Plutonium Turnings Generated from Machining Activities

Energy Technology Data Exchange (ETDEWEB)

Gonzales, John Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Vigil, Duane M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jachimowski, Thomas A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Archuleta, Alonso [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Arellano, Gerald Joseph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Melton, Vince Lee [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-10-20

The purpose of this project was to determine the density of plutonium (Pu) turnings generated from the range of machining activities, using both surrogate material and machined Pu turnings. Verify that 500 grams (g) of plutonium will fit in a one quart container using a surrogate equivalent volume and that 100 grams of Pu will fit in a one quart Savy container.

Attracting Private Investment to Contaminated Properties: The Value of Public Interventions

Science.gov (United States)

Wernstedt, Kris; Meyer, Peter B.; Alberini, Anna

2006-01-01

We employ a mail survey of private developers that uses conjoint choice experiments and Likert-scaled attitudinal questions to examine preferences for policy instruments and incentives intended to encourage brownfield cleanup and redevelopment. Our analysis suggests that developers judge public hearing requirements at brownfield redevelopments…

Prediction and analysis of beta-turns in proteins by support vector machine.

Science.gov (United States)

Pham, Tho Hoan; Satou, Kenji; Ho, Tu Bao

2003-01-01

Tight turn has long been recognized as one of the three important features of proteins after the alpha-helix and beta-sheet. Tight turns play an important role in globular proteins from both the structural and functional points of view. More than 90% tight turns are beta-turns. Analysis and prediction of beta-turns in particular and tight turns in general are very useful for the design of new molecules such as drugs, pesticides, and antigens. In this paper, we introduce a support vector machine (SVM) approach to prediction and analysis of beta-turns. We have investigated two aspects of applying SVM to the prediction and analysis of beta-turns. First, we developed a new SVM method, called BTSVM, which predicts beta-turns of a protein from its sequence. The prediction results on the dataset of 426 non-homologous protein chains by sevenfold cross-validation technique showed that our method is superior to the other previous methods. Second, we analyzed how amino acid positions support (or prevent) the formation of beta-turns based on the "multivariable" classification model of a linear SVM. This model is more general than the other ones of previous statistical methods. Our analysis results are more comprehensive and easier to use than previously published analysis results.

Effects of dual task on turning ability in stroke survivors and older adults.

Science.gov (United States)

Hollands, K L; Agnihotri, D; Tyson, S F

2014-09-01

Turning is an integral component of independent mobility in which stroke survivors frequently fall. This study sought to measure the effects of competing cognitive demands on the stepping patterns of stroke survivors, compared to healthy age-match adults, during turning as a putative mechanism for falls. Walking and turning (90°) was assessed under single (walking and turning alone) and dual task (subtracting serial 3s while walking and turning) conditions using an electronic, pressure-sensitive walkway. Dependent measures were time to turn, variability in time to turn, step length, step width and single support time during three steps of the turn. Turning ability in single and dual task conditions was compared between stroke survivors (n=17, mean ± SD: 59 ± 113 months post-stroke, 64 ± 10 years of age) and age-matched healthy counterparts (n=15). Both groups took longer, were more variable, tended to widen the second step and, crucially, increased single support time on the inside leg of the turn while turning and distracted. Increased single support time during turning may represent biomechanical mechanism, within stepping patterns of turning under distraction, for increased risk of falls for both stroke survivors and older adults. Crown Copyright © 2014. Published by Elsevier B.V. All rights reserved.

Hydrodynamics of Turning Flocks

OpenAIRE

Yang, Xingbo; Marchetti, M. Cristina

2014-01-01

We present a hydrodynamic model of flocking that generalizes the familiar Toner-Tu equations to incorporate turning inertia of well-polarized flocks. The continuum equations controlled by only two dimensionless parameters, orientational inertia and alignment strength, are derived by coarse graining the inertial spin model recently proposed by Cavagna et al. The interplay between orientational inertia and bend elasticity of the flock yields anisotropic spin waves that mediate the propagation o...

A prospective observational study of ICU patient position and frequency of turning.

Science.gov (United States)

Goldhill, D R; Badacsonyi, A; Goldhill, A A; Waldmann, C

2008-05-01

Positioning and turning critically ill patients may be beneficial but there are little data on current practice. We prospectively recorded patient position every hour over two separate days in 40 British intensive care units and analysed 393 sets of observation. Five patients were prone at any time and 3.8% (day 1) and 5% (day 2) were on rotating beds. Patients were on their back for 46.1% of observations, turned left for 28.4% and right for 25.5%, and head up for 97.4%. A turn was defined as a change between on back, turned left or turned right. The average time (SD) between turns was 4.85 (3.3) h. There was no significant association between the average time between turns and age, weight, height, gender, respiratory diagnosis, intubated and ventilated, sedation score, day of week or nurse:patient ratio. There was a significant difference between hospitals in the frequency with which patients were turned.

TOWARDS COLLABORATION BETWEEN PUBLIC WELFARE AGENCIES AND MASS ENTERTAINMENT MEDIA TO BRING ABOUT A TURNING POINT STAGE IN THE LIVES OF BATTERED WOMEN

Directory of Open Access Journals (Sweden)

Nourit Segev

2010-06-01

Full Text Available This article examines the promoting and impeding factors that advance the turning point in thelives of battered women. The subject is important because of the contribution of the turning pointstage to the ability of women to leave the violent relationship and the way in which the publicwelfare agencies become involved in order to help the victim to advance towards the turning point.The article also reviews the influence of the entertainment media in shaping the positions of thepublic regarding marital violence, the presentation of battered women in the media, and theconnection between their media presentation and their advancement towards the turning point inreality.The research is based on a combination of qualitative and quantitative data, and focuses on contentanalysis. The qualitative content analysis included 40 journal articles, 1 documentary film and onedrama series, the personal interviews included 8 social workers and 6 journalists, and the focusgroup included 8 battered women. The findings indicate an awareness of battered women in thevarious media, and of a gap between the perception of social workers and the journalists regardingthe role of the media in raising social problems.The article calls for cooperation between the media and the professionals in order to construct messages of empowerment that will enable women to advance towards the turning point in theirlives.

pi-Turns: types, systematics and the context of their occurrence in protein structures.

Science.gov (United States)

Dasgupta, Bhaskar; Chakrabarti, Pinak

2008-09-22

For a proper understanding of protein structure and folding it is important to know if a polypeptide segment adopts a conformation inherent in the sequence or it depends on the context of its flanking secondary structures. Turns of various lengths have been studied and characterized starting from three-residue gamma-turn to six-residue pi-turn. The Schellman motif occurring at the C-terminal end of alpha-helices is a classical example of hydrogen bonded pi-turn involving residues at (i) and (i+5) positions. Hydrogen bonded and non-hydrogen bonded beta- and alpha-turns have been identified previously; likewise, a systematic characterization of pi-turns would provide valuable insight into turn structures. An analysis of protein structures indicates that at least 20% of pi-turns occur independent of the Schellman motif. The two categories of pi-turns, designated as pi-HB and SCH, have been further classified on the basis of backbone conformation and both have AAAa as the major class. They differ in the residue usage at position (i+1), the former having a large preference for Pro that is absent in the latter. As in the case of shorter length beta- and alpha-turns, pi-turns have also been identified not only on the basis of the existence of hydrogen bond, but also using the distance between terminal C alpha-atoms, and this resulted in a comparable number of non-hydrogen-bonded pi-turns (pi-NHB). The presence of shorter beta- and alpha-turns within all categories of pi-turns, the subtle variations in backbone torsion angles along the turn residues, the location of the turns in the context of tertiary structures have been studied. pi-turns have been characterized, first using hydrogen bond and the distance between C alpha atoms of the terminal residues, and then using backbone torsion angles. While the Schellman motif has a structural role in helix termination, many of the pi-HB turns, being located on surface cavities, have functional role and there is also sequence

Topological side-chain classification of beta-turns: ideal motifs for peptidomimetic development.

Science.gov (United States)

Tran, Tran Trung; McKie, Jim; Meutermans, Wim D F; Bourne, Gregory T; Andrews, Peter R; Smythe, Mark L

2005-08-01

Beta-turns are important topological motifs for biological recognition of proteins and peptides. Organic molecules that sample the side chain positions of beta-turns have shown broad binding capacity to multiple different receptors, for example benzodiazepines. Beta-turns have traditionally been classified into various types based on the backbone dihedral angles (phi2, psi2, phi3 and psi3). Indeed, 57-68% of beta-turns are currently classified into 8 different backbone families (Type I, Type II, Type I', Type II', Type VIII, Type VIa1, Type VIa2 and Type VIb and Type IV which represents unclassified beta-turns). Although this classification of beta-turns has been useful, the resulting beta-turn types are not ideal for the design of beta-turn mimetics as they do not reflect topological features of the recognition elements, the side chains. To overcome this, we have extracted beta-turns from a data set of non-homologous and high-resolution protein crystal structures. The side chain positions, as defined by C(alpha)-C(beta) vectors, of these turns have been clustered using the kth nearest neighbor clustering and filtered nearest centroid sorting algorithms. Nine clusters were obtained that cluster 90% of the data, and the average intra-cluster RMSD of the four C(alpha)-C(beta) vectors is 0.36. The nine clusters therefore represent the topology of the side chain scaffold architecture of the vast majority of beta-turns. The mean structures of the nine clusters are useful for the development of beta-turn mimetics and as biological descriptors for focusing combinatorial chemistry towards biologically relevant topological space.

Head turning as a prominent motor symptom in status epilepticus.

Science.gov (United States)

Bauer, Gerhard; Broessner, Gregor; Unterberger, Iris; Walser, Gerald; Pfausler, Bettina; Trinka, Eugen

2008-06-01

Head and eye turning is frequently observed during seizures. Versions with tonic and/or clonic symptoms can be differentiated from smooth head deviations. Head turning as a prominent symptom of status epilepticus has not previously been reported. We present eight case reports, (7 women/1 man, mean age 41 years, median 41.5, range 10 to 74), of status epilepticus (SE), with head turning as a prominent motor symptom. Six were accompanied by continuous frontal, occipital and temporal ictal epileptiform discharges. Furthermore, two patients had absence status with rhythmic and clonic head versions. While the localizing significance of head turnings in SE is low, in our cases, the direction was away from the discharging hemisphere in all cases of focal SE regardless of whether the turning was classified as version (three cases) or deviation (three cases). In this small series of SE, the classical observation of a patient looking away from the discharging hemisphere is still valid.

Turn Management or Impression Management?

NARCIS (Netherlands)

ter Maat, Mark; Heylen, Dirk K.J.; Ruttkay, Z.M.; Kipp, M.; Nijholt, Antinus; Vilhjálmsson, H.H.

2009-01-01

We look at how some basic choices in the management of turns influence the impression that people get from an agent. We look at scales concerning personality, emotion and interpersonal stance. We do this by a person perception study, or rather an agent perception study, using simulated conversations

Professional Employees Turn to Unions

Science.gov (United States)

Chamot, Dennis

1976-01-01

White-collar and professional employees are increasingly turning to unions to combat their loss of independence as employees of large organizations. Managers should realize that they and professional employees have different viewpoints about job situations and that the current trend toward white-collar unionism is apt to continue. (JG)

A Cognitive Analysis of Truck Drivers’ Right-hand Turns

DEFF Research Database (Denmark)

Sieker, Tobias Grønborg; G. Skulason, Thorgeir; Sletting, Kristian

2015-01-01

This paper presents an investigation of truck drivers’ performance during right-hand turns performed in intersections with traffic lights in order to elicit the truck drivers’ domain, decision-making processes, and the strategies used while executing the turn. To gain knowledge about this, a truc...

Did you get any help? A post-hoc secondary analysis of a randomized controlled trial of psychoeducation for patients with antisocial personality disorder in outpatient substance abuse treatment programs.

Science.gov (United States)

Thylstrup, Birgitte; Schrøder, Sidsel; Fridell, Mats; Hesse, Morten

2017-01-09

People in treatment for substance use disorder commonly have comorbid personality disorders, including antisocial personality disorder. Little is known about treatments that specifically address comorbid antisocial personality disorder. Self-rated help received for antisocial personality disorder was assessed during follow-ups at 3, 9 and 15 months post-randomization of a randomized trial of psychoeducation for people with comorbid substance use and antisocial personality disorder (n = 175). Randomization to psychoeducation was associated with increased perceived help for antisocial personality disorder. Perceived help for antisocial personality disorder was in turn associated with more days abstinent and higher treatment satisfaction at the 3-month follow-up, and reduced risk of dropping out of treatment after the 3-month follow-up, and perceived help mediated the effects of random assignment on days abstinent at 3-month. Brief psychoeducation for antisocial personality disorder increased patients' self-rated help for antisocial personality disorder in substance abuse treatment, and reporting having received help for antisocial personality disorder was in turn associated with better short-term outcomes, e.g., days abstinent, dropout from treatment and treatment satisfaction. ISRCTN registry, ISRCTN67266318 , retrospectively registered 17/7/2012.

Assessing lexical, syntactic, and conceptual turn-by-turn alignment in conversations involving conflict and deception

DEFF Research Database (Denmark)

Duran, Nicholas; Fusaroli, Riccardo; Paxton, Alexandra

2015-01-01

-based NLP tools, the procedure begins by taking conversational partners' turns and converting each into a lemmatized sequence of words, assigning part-of-speech tags and computing high-dimensional semantic vectors per each utterance. Words and part-of-speech tags are further sequenced into n-g! rams...

Turn me on! Using the “Internet of Things” to turn things on and off

CSIR Research Space (South Africa)

Butgereit, L

2011-10-01

Full Text Available to the Internet. There are many examples of things posting their status on Twitter and allowing uni-directional access. TurnMeOn is an example of allowing bidirectional access between people and things using Internet protocols. Users can query the status of a...

Semiautomatic machine for turning inside out industrial leather gloves

International Nuclear Information System (INIS)

Aragón-Gonzalez, G; Cano-Blanco, M; León-Galicia, A; Medrano-Sierra, L F; Morales-Gómez, J R

2015-01-01

The last step in the industrial leather gloves manufacturing is to turn the inside out so that the sewing be in the inside of the glove. This work presents the design and testing of a machine for that purpose. In order to quantify the relevant variables, testing was performed with a prototype glove. The employed devices and the testing proceeding were developed experimentally. The obtained information was used to build the turning inside out machine. This machine works with pneumatic power to carry the inside out turning by means of double effect lineal actuators. It has two independent work stations that could be operated simultaneously by two persons, one in each station or in single mode operating one station by one person. The turning inside out cycle is started by means of directional control valves operated with pedals. The velocity and developed force by the actuators is controlled with typical pneumatic resources. The geometrical dimensions of the machine are: 1.15 m length; 0.71 m width and 2.15 m high. Its approximated weight is 120 kg. The air consumption is 5.4 fps by each working station with 60 psig work pressure. The turning inside out operation is 40 s for each industrial leather glove

75 FR 53689 - Creation of the Fiscal Year (FY) 2011 “Environmental Workforce Development and Job Training...

Science.gov (United States)

2010-09-01

... Workforce Development and Job Training Grants Program,'' Formerly Referred to as the ``Brownfields Job... collaborate on workforce development and job training with other programs within OSWER to develop a job... ``Brownfields Job Training Grants Program'' was expanded and will now be referred to as the ``Environmental...

Identification of a key structural element for protein folding within beta-hairpin turns.

Science.gov (United States)

Kim, Jaewon; Brych, Stephen R; Lee, Jihun; Logan, Timothy M; Blaber, Michael

2003-05-09

Specific residues in a polypeptide may be key contributors to the stability and foldability of the unique native structure. Identification and prediction of such residues is, therefore, an important area of investigation in solving the protein folding problem. Atypical main-chain conformations can help identify strains within a folded protein, and by inference, positions where unique amino acids may have a naturally high frequency of occurrence due to favorable contributions to stability and folding. Non-Gly residues located near the left-handed alpha-helical region (L-alpha) of the Ramachandran plot are a potential indicator of structural strain. Although many investigators have studied mutations at such positions, no consistent energetic or kinetic contributions to stability or folding have been elucidated. Here we report a study of the effects of Gly, Ala and Asn substitutions found within the L-alpha region at a characteristic position in defined beta-hairpin turns within human acidic fibroblast growth factor, and demonstrate consistent effects upon stability and folding kinetics. The thermodynamic and kinetic data are compared to available data for similar mutations in other proteins, with excellent agreement. The results have identified that Gly at the i+3 position within a subset of beta-hairpin turns is a key contributor towards increasing the rate of folding to the native state of the polypeptide while leaving the rate of unfolding largely unchanged.

Neurodharma Self-Help: Personalized Science Communication as Brain Management.

Science.gov (United States)

Eklöf, Jenny

2017-09-01

Over the past ten to fifteen years, medical interventions, therapeutic approaches and scientific studies involving mindfulness meditation have gained traction in areas such as clinical psychology, psychotherapy, and neuroscience. Simultaneously, mindfulness has had a very strong public appeal. This article examines some of the ways in which the medical and scientific meaning of mindfulness is communicated in public and to the public. In particular, it shows how experts in the field of mindfulness neuroscience seek to communicate to the public at large the imperative of brain fitness for the promotion of health, wellbeing and happiness. The study identifies claims being made in popular outlets that, by and large, bypass traditional mass media, such as self-help books, websites and online videos. By treating this material as a form of personalized science communication, this article contributes to the body of literature that understands science communication as a continuum and the boundary between science and popularized science as the outcome of human negotiations. The study finds that processes of personalization help to build bridges between scientific findings and their supposed application, that they infuse science with subjective meaning, and turn expert communication with the public into a moral vocation.

Family matters: Directionality of turning bias while kissing is modulated by context.

Science.gov (United States)

Sedgewick, Jennifer R; Elias, Lorin J

2016-01-28

When leaning forward to kiss to a romantic partner, individuals tend to direct their kiss to the right more often than the left. Studies have consistently demonstrated this kissing asymmetry, although other factors known to influence lateral biases, such as sex or situational context, had yet to be explored. The primary purpose of our study was to investigate if turning direction was consistent between a romantic (parent-parent) and parental (parent-child) kissing context, and secondly, to examine if sex differences influenced turning bias between parent-child kissing partners. An archival analysis coded the direction of turning bias for 161 images of romantic kissing (mothers kissing fathers) and 529 images of parental kissing (mothers or fathers kissing sons or daughters). The results indicated that the direction of turning bias differed between kissing contexts. As expected, a right-turn bias was observed for romantic kissing; however, a left-turn bias was exhibited for parental kissing. There was no significant difference of turning bias between any parent-child kissing partners. Interpretations for the left-turn bias discuss parental kissing as a learned lateral behaviour.

TESTING OF THE OSCILLATIONS DAMPING CAPABILITY BY EXTERNAL TURNING WITH THE USE OF ALTERNATE BARS IN THE CONSTRUCTION OF THE TURNING TOOL HOLDER

Directory of Open Access Journals (Sweden)

Marten Madissoo

2015-09-01

Full Text Available Modern machinery is highly demanding and the requirement for producing high quality parts is crucial in modern engineering. The most important is the setting of dimensions and tolerances of the surfaces which work together. The shape- and position tolerances may raise the existence of failures and can affect the performance of different machinery. Consequently it is very important that the cutting process is as stable as possible in order to get the best quality parts and to achieve the maximum lifetime of the cutting tool. Unfortunately the machining of complex products from hard materials is accompanied by loss of stability of the cutting process, which leads to tool oscillations, causing an increasing wear of the cutting tools, reducing the lifetime of the machine actuators, which ultimately affects the quality and accuracy of processing responsible products. To avoid this kind of chatter vibrations it is possible to construct specialized cutting tools and tool holder witch reduce this kind of vibrations and can help to increase the manufacturing precision of machine components. In consequence of this the paper focuses on testing the utility effect of a cutting tool holder with alternate bars of different material structure in its construction. The different bars are made from rolled steel and have an anisotropic structure which also has different mechanical properties. This construction is considered as a method to improve the cutting stability of the cutting tool and helps to reduce the oscillations in the finishing turning. The method for the construction of the damper instrument holder with alternate bars is proposed.DOI: http://dx.doi.org/10.5755/j01.ms.21.3.7351

Cutting forces during turning with variable depth of cut

Directory of Open Access Journals (Sweden)

M. Sadílek

2016-03-01

The proposed research for the paper is an experimental work – measuring cutting forces and monitoring of the tool wear on the cutting edge. It compares the turning where standard roughing cycle is used and the turning where the proposed roughing cycle with variable depth of cut is applied.

An expert machine tools selection system for turning operation

NARCIS (Netherlands)

Tan, C.F.; Khalil, S.N.; Karjanto, J.; Wahidin, L.S.; Chen, W.; Rauterberg, G.W.M.

2015-01-01

The turning machining process is an important process in the manufacturing industry. It is important to select the right tool for the turning process so that the manufacturing cost will be decreased. The main objective of this research is to select the most suitable machine tools with respect to

Support vector machines for prediction and analysis of beta and gamma-turns in proteins.

Science.gov (United States)

Pham, Tho Hoan; Satou, Kenji; Ho, Tu Bao

2005-04-01

Tight turns have long been recognized as one of the three important features of proteins, together with alpha-helix and beta-sheet. Tight turns play an important role in globular proteins from both the structural and functional points of view. More than 90% tight turns are beta-turns and most of the rest are gamma-turns. Analysis and prediction of beta-turns and gamma-turns is very useful for design of new molecules such as drugs, pesticides, and antigens. In this paper we investigated two aspects of applying support vector machine (SVM), a promising machine learning method for bioinformatics, to prediction and analysis of beta-turns and gamma-turns. First, we developed two SVM-based methods, called BTSVM and GTSVM, which predict beta-turns and gamma-turns in a protein from its sequence. When compared with other methods, BTSVM has a superior performance and GTSVM is competitive. Second, we used SVMs with a linear kernel to estimate the support of amino acids for the formation of beta-turns and gamma-turns depending on their position in a protein. Our analysis results are more comprehensive and easier to use than the previous results in designing turns in proteins.

Why Does Hair Turn Gray?

Science.gov (United States)

... out, but people with naturally lighter hair are just as likely to go gray. From the time a person notices a few gray hairs, it may take more than 10 years for all of that person's hair to turn ... really believe that this happens. Just in case, try not to freak out your ...

Crack turning in integrally stiffened aircraft structures

Science.gov (United States)

Pettit, Richard Glen

Current emphasis in the aircraft industry toward reducing manufacturing cost has created a renewed interest in integrally stiffened structures. Crack turning has been identified as an approach to improve the damage tolerance and fail-safety of this class of structures. A desired behavior is for skin cracks to turn before reaching a stiffener, instead of growing straight through. A crack in a pressurized fuselage encounters high T-stress as it nears the stiffener---a condition favorable to crack turning. Also, the tear resistance of aluminum alloys typically varies with crack orientation, a form of anisotropy that can influence the crack path. The present work addresses these issues with a study of crack turning in two-dimensions, including the effects of both T-stress and fracture anisotropy. Both effects are shown to have relation to the process zone size, an interaction that is central to this study. Following an introduction to the problem, the T-stress effect is studied for a slightly curved semi-infinite crack with a cohesive process zone, yielding a closed form expression for the future crack path in an infinite medium. For a given initial crack tip curvature and tensile T-stress, the crack path instability is found to increase with process zone size. Fracture orthotropy is treated using a simple function to interpolate between the two principal fracture resistance values in two-dimensions. An extension to three-dimensions interpolates between the six principal values of fracture resistance. Also discussed is the transition between mode I and mode II fracture in metals. For isotropic materials, there is evidence that the crack seeks out a direction of either local symmetry (pure mode I) or local asymmetry (pure mode II) growth. For orthotropic materials the favored states are not pure modal, and have mode mixity that is a function of crack orientation. Drawing upon these principles, two crack turning prediction approaches are extended to include fracture

Prediction of beta-turns and beta-turn types by a novel bidirectional Elman-type recurrent neural network with multiple output layers (MOLEBRNN).

Science.gov (United States)

Kirschner, Andreas; Frishman, Dmitrij

2008-10-01

Prediction of beta-turns from amino acid sequences has long been recognized as an important problem in structural bioinformatics due to their frequent occurrence as well as their structural and functional significance. Because various structural features of proteins are intercorrelated, secondary structure information has been often employed as an additional input for machine learning algorithms while predicting beta-turns. Here we present a novel bidirectional Elman-type recurrent neural network with multiple output layers (MOLEBRNN) capable of predicting multiple mutually dependent structural motifs and demonstrate its efficiency in recognizing three aspects of protein structure: beta-turns, beta-turn types, and secondary structure. The advantage of our method compared to other predictors is that it does not require any external input except for sequence profiles because interdependencies between different structural features are taken into account implicitly during the learning process. In a sevenfold cross-validation experiment on a standard test dataset our method exhibits the total prediction accuracy of 77.9% and the Mathew's Correlation Coefficient of 0.45, the highest performance reported so far. It also outperforms other known methods in delineating individual turn types. We demonstrate how simultaneous prediction of multiple targets influences prediction performance on single targets. The MOLEBRNN presented here is a generic method applicable in a variety of research fields where multiple mutually depending target classes need to be predicted. http://webclu.bio.wzw.tum.de/predator-web/.

Expanding the peptide beta-turn in alphagamma hybrid sequences: 12 atom hydrogen bonded helical and hairpin turns.

Science.gov (United States)

Chatterjee, Sunanda; Vasudev, Prema G; Raghothama, Srinivasarao; Ramakrishnan, Chandrasekharan; Shamala, Narayanaswamy; Balaram, Padmanabhan

2009-04-29

Hybrid peptide segments containing contiguous alpha and gamma amino acid residues can form C(12) hydrogen bonded turns which may be considered as backbone expanded analogues of C(10) (beta-turns) found in alphaalpha segments. Exploration of the regular hydrogen bonded conformations accessible for hybrid alphagamma sequences is facilitated by the use of a stereochemically constrained gamma amino acid residue gabapentin (1-aminomethylcyclohexaneacetic acid, Gpn), in which the two torsion angles about C(gamma)-C(beta) (theta(1)) and C(beta)-C(alpha) (theta(2)) are predominantly restricted to gauche conformations. The crystal structures of the octapeptides Boc-Gpn-Aib-Gpn-Aib-Gpn-Aib-Gpn-Aib-OMe (1) and Boc-Leu-Phe-Val-Aib-Gpn-Leu-Phe-Val-OMe (2) reveal two distinct conformations for the Aib-Gpn segment. Peptide 1 forms a continuous helix over the Aib(2)-Aib(6) segment, while the peptide 2 forms a beta-hairpin structure stabilized by four cross-strand hydrogen bonds with the Aib-Gpn segment forming a nonhelical C(12) turn. The robustness of the helix in peptide 1 in solution is demonstrated by NMR methods. Peptide 2 is conformationally fragile in solution with evidence of beta-hairpin conformations being obtained in methanol. Theoretical calculations permit delineation of the various C(12) hydrogen bonded structures which are energetically feasible in alphagamma and gammaalpha sequences.

BetaTPred: prediction of beta-TURNS in a protein using statistical algorithms.

Science.gov (United States)

Kaur, Harpreet; Raghava, G P S

2002-03-01

beta-turns play an important role from a structural and functional point of view. beta-turns are the most common type of non-repetitive structures in proteins and comprise on average, 25% of the residues. In the past numerous methods have been developed to predict beta-turns in a protein. Most of these prediction methods are based on statistical approaches. In order to utilize the full potential of these methods, there is a need to develop a web server. This paper describes a web server called BetaTPred, developed for predicting beta-TURNS in a protein from its amino acid sequence. BetaTPred allows the user to predict turns in a protein using existing statistical algorithms. It also allows to predict different types of beta-TURNS e.g. type I, I', II, II', VI, VIII and non-specific. This server assists the users in predicting the consensus beta-TURNS in a protein. The server is accessible from http://imtech.res.in/raghava/betatpred/

Effect of stern hull shape on turning circle of ships

Science.gov (United States)

Jaswar, Maimun, A.; Wahid, M. A.; Priyanto, A.; Zamani, Pauzi, Saman

2012-06-01

Many factors such as: stern hull shape, length, draught, trim, propulsion system and external forces affecting the drift angle influence rate of turn and size of turning circle of ships. This paper discusses turning circle characteristics of U and V stern hull shape of Very Large Crude Oil Carrier (VLCC) ships. The ships have same principal dimension such as length, beam, and draught. The turning circle characteristics of the VLCC ships are simulated at 35 degree of rudder angle. In the analysis, firstly, turning circle performance of U-type VLCC ship is simulated. In the simulation, initial ship speed is determined using given power and rpm. Hydrodynamic derivatives coefficients are determined by including effect of fullness of aft run. Using the obtained, speed and hydrodynamic coefficients, force and moment acting on hull, force and moment induced by propeller, force and moment induced by rudder are determined. Finally, ship trajectory, ratio of speed, yaw angle and drift angle are determined. Results of simulation results of the VLCC ship are compared with the experimental one as validation. Using the same method, V-type VLCC is simulated and the simulation results are compared with U-type VLCC ship. Results shows the turning circle of U-type is larger than V-type due to effect stern hul results of simulation are.

Measurement of signal use and vehicle turns as indication of driver cognition.

Science.gov (United States)

Wallace, Bruce; Goubran, Rafik; Knoefel, Frank

2014-01-01

This paper uses data analytics to provide a method for the measurement of a key driving task, turn signal usage as a measure of an automatic over-learned cognitive function drivers. The paper augments previously reported more complex executive function cognition measures by proposing an algorithm that analyzes dashboard video to detect turn indicator use with 100% accuracy without any false positives. The paper proposes two algorithms that determine the actual turns made on a trip. The first through analysis of GPS location traces for the vehicle, locating 73% of the turns made with a very low false positive rate of 3%. A second algorithm uses GIS tools to retroactively create turn by turn directions. Fusion of GIS and GPS information raises performance to 77%. The paper presents the algorithm required to measure signal use for actual turns by realigning the 0.2Hz GPS data, 30fps video and GIS turn events. The result is a measure that can be tracked over time and changes in the driver's performance can result in alerts to the driver, caregivers or clinicians as indication of cognitive change. A lack of decline can also be shared as reassurance.

Analysis of the lateral push-off in the freestyle flip turn.

Science.gov (United States)

Araujo, Luciana; Pereira, Suzana; Gatti, Roberta; Freitas, Elinai; Jacomel, Gabriel; Roesler, Helio; Villas-Boas, Joao

2010-09-01

The aim of this study was to examine the contact phase during the lateral push-off in the turn of front crawl swimming to determine which biomechanical variables (maximum normalized peak force, contact time, impulse, angle of knee flexion, and total turn time within 15 m) contribute to the performance of this turn technique. Thirty-four swimmers of state, national, and international competitive standard participated in the study. For data collection, the following equipment was used: an underwater force platform, a 30-Hz VHS video camera, and a MiniDv digital camera within an underwater box. Data are expressed as descriptive statistics. Inferential analyses were performed using Pearson's correlation and multiple linear regressions. All variables studied had a significant relationship with turn performance. We conclude that a turn executed with a knee flexion angle of between 100° and 120° provides optimum peak forces to generate impulses that allow the swimmer to lose less time in the turn without the need for an excessive force application and with less energy lost.

A novel method for calculating the energy cost of turning during running

Directory of Open Access Journals (Sweden)

Hatamoto Y

2013-05-01

Full Text Available Yoichi Hatamoto,1 Yosuke Yamada,2 Tatsuya Fujii,3 Yasuki Higaki,3 Akira Kiyonaga,3 Hiroaki Tanaka31Graduate School of Sports and Health Science, Fukuoka University, Nanakuma Jonan-ku Fukuoka, Japan; 2The Fukuoka University Institute for Physical Activity, Nanakuma Jonan-ku Fukuoka, Japan; 3Faculty of Sports and Health Science, Fukuoka University, Nanakuma Jonan-ku Fukuoka, JapanAbstract: Although changes of direction are one of the essential locomotor patterns in ball sports, the physiological demand of turning during running has not been previously investigated. We proposed a novel approach by which to evaluate the physiological demand of turning. The purposes of this study were to establish a method of measuring the energy expenditure (EE of a 180° turn during running and to investigate the effect of two different running speeds on the EE of a 180° turn. Eleven young, male participants performed measurement sessions at two different running speeds (4.3 and 5.4 km/hour. Each measurement session consisted of five trials, and each trial had a different frequency of turns. At both running speeds, as the turn frequency increased the gross oxygen consumption (V · O2 also increased linearly (4.3 km/hour, r = 0.973; 5.4 km/hour, r = 0.996. The V · O2 of a turn at 5.4 km/hour (0.55 [SD 0.09] mL/kg was higher than at 4.3 km/hour (0.34 [SD 0.13] mL/kg (P < 0.001. We conclude that the gross V · O2 of running at a fixed speed with turns is proportional to turn frequency and that the EE of a turn is different at different running speeds. The Different Frequency Accumulation Method is a useful tool for assessing the physiological demands of complex locomotor activity.Keywords: energy expenditure, turning, turn frequency, running speed, V · O2, heart rate

Now, It's Your Turn: How You Can Take Medicine Safely

Science.gov (United States)

... turn Javascript on. Feature: Taking Medicines Safely Now, It's Your Turn: How You Can Take Medicine Safely ... medicine. The pharmacist has filled the prescription. Now it's up to you to take the medicine safely. ...

Helping You Help Me: The Role of Diagnostic (In)congruence in the Helping Process within Organizations

OpenAIRE

Fisher, Colin M.; Pillemer, Julianna; Amabile, Teresa M.

2014-01-01

Through an inductive, multi-method field study at a major design firm, we investigated the helping process in project work and how that process affects the success of a helping episode, as perceived by help-givers and/or -receivers. We used daily diary entries and weekly interviews from four project teams, and a separate sample of critical incident interviews, to induce process models of successful and unsuccessful helping episodes. We found that, in unsuccessful episodes, help-givers and -re...

ANALYSIS OF CHIP FORMATION DURING HARD TURNING THROUGH ACOUSTIC EMISSION

Directory of Open Access Journals (Sweden)

Miroslav Neslušan

2012-01-01

Full Text Available The paper deals with analysis of chip formation and related aspects of the chip formation during turning hardened steel 100Cr6. The paper draws a comparison of some aspects of the chip formation between turning annealed and hardened roll bearing steel. The results of the analysis show that there is the formation of a segmented chip in the case of hard turning. Frequency of segmentation is very high. A conventional piezoelectric dynamometer limits the frequency response to about 3.5 kHz. On the other hand, the frequency of process fluctuation may by obtained by using accelerometers or acoustic emission. This paper reports about the dynamic character of cutting process when hard turning and correlation among the calculated segmentation frequencies and the experimental analysis.

Helping HELP with limited resources: the Luquillo experience

Science.gov (United States)

F.N. Scatena; JR Ortiz-Zayas; J.F. Blanco-Libreros

2008-01-01

By definition the HELP approach involves the active participation of individuals from a wide range of disciplines and backgrounds, including representatives of industry, academics, natural resource managers, and local officials and community leaders. While there is considerable enthusiasm and support for the integrated HELP approach, a central problem for all HELP...

Diamond turning of glass

Energy Technology Data Exchange (ETDEWEB)

Blackley, W.S.; Scattergood, R.O.

1988-12-01

A new research initiative will be undertaken to investigate the critical cutting depth concepts for single point diamond turning of brittle, amorphous materials. Inorganic glasses and a brittle, thermoset polymer (organic glass) are the principal candidate materials. Interrupted cutting tests similar to those done in earlier research are Ge and Si crystals will be made to obtain critical depth values as a function of machining parameters. The results will provide systematic data with which to assess machining performance on glasses and amorphous materials

Optical spectroscopic elucidation of beta-turns in disulfide bridged cyclic tetrapeptides.

Science.gov (United States)

Borics, Attila; Murphy, Richard F; Lovas, Sándor

2007-01-01

Vibrational circular dichroism (VCD) spectroscopic features of type II beta-turns were characterized previously, but, criteria for differentiation between beta-turn types had not been established yet. Model tetrapeptides, cyclized through a disulfide bridge, were designed on the basis of previous experimental results and the observed incidence of amino acid residues in the i + 1 and i + 2 positions in beta-turns, to determine the features of VCD spectra of type I and II beta-turns. The results were correlated with electronic circular dichroism (ECD) spectra and VCD spectra calculated from conformational data obtained by molecular dynamics (MD) simulations. All cyclic tetrapeptides yielded VCD signals with a higher frequency negative and a lower frequency positive couplet with negative lobes overlapping. MD simulations confirmed the conformational homogeneity of these peptides in solution. Comparison with ECD spectroscopy, MD, and quantum chemical calculation results suggested that the low frequency component of VCD spectra originating from the tertiary amide vibrations could be used to distinguish between types of beta-turn structures. On the basis of this observation, VCD spectroscopic features of type II and VIII beta-turns and ECD spectroscopic properties of a type VIII beta-turn were suggested. The need for independent experimental as well as theoretical investigations to obtain decisive conformational information was recognized. Copyright 2006 Wiley Periodicals, Inc.

Getting Help

Science.gov (United States)

... Parents & Students Home > Special Features > Getting Help Getting Help Resources from NIAAA Treatment for Alcohol Problems: Finding ... and find ways to make a change. Professional help Your doctor. Primary care and mental health practitioners ...

Turning university professors into competent learners

NARCIS (Netherlands)

Stefanova, Eliza; Ilieva, Miroslava; Nikolova, Nikolina; Stefanov, Krassen

2008-01-01

Stefanova, E., Ilieva, M., Nikolova, N, & Stefanov, K. (2008). Turning university professors into competent learners. In H. W. Sligte & R. Koper (Eds.), Proceedings of the 4th TENCompetence Open Workshop. Empowering Learners for Lifelong Competence Development: pedagogical, organisational and

Cellular Reprogramming–Turning the Clock Back

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 18; Issue 6. Cellular Reprogramming - Turning the Clock Back - Nobel Prize in Physiology or Medicine, 2012. Deepa Subramanyam. General Article Volume 18 Issue 6 June 2013 pp 514-521 ...

Ignition experiment in a single-turn-coil tokamak

International Nuclear Information System (INIS)

Carrera, R.; Driga, M.; Gully, J.H.

1989-01-01

A novel concept for a fusion ignition experiment, IGNITEX proposed along the lines of previous ideas for a compact thermonuclear device is analyzed. A single-turn-coil tokamak is analyzed. A single-turn-coil tokamak supplied by homopolar generators can ohmically heat a DT plasma to ignition conditions and maintain a thermally stable ignited phase for about ten energy confinement times. The IGNITEX experiment can provide a simple and relatively inexpensive way to produce and control ignited plasmas for scientific study

Models and Algorithms for Tracking Target with Coordinated Turn Motion

Directory of Open Access Journals (Sweden)

Xianghui Yuan

2014-01-01

Full Text Available Tracking target with coordinated turn (CT motion is highly dependent on the models and algorithms. First, the widely used models are compared in this paper—coordinated turn (CT model with known turn rate, augmented coordinated turn (ACT model with Cartesian velocity, ACT model with polar velocity, CT model using a kinematic constraint, and maneuver centered circular motion model. Then, in the single model tracking framework, the tracking algorithms for the last four models are compared and the suggestions on the choice of models for different practical target tracking problems are given. Finally, in the multiple models (MM framework, the algorithm based on expectation maximization (EM algorithm is derived, including both the batch form and the recursive form. Compared with the widely used interacting multiple model (IMM algorithm, the EM algorithm shows its effectiveness.

Effect of a printed reminder in the waiting room to turn off mobile phones during consultation: a before and after study

Directory of Open Access Journals (Sweden)

de Aguiar Sylvia

2009-03-01

Full Text Available Abstract Background Telephone interruptions during consultations are one cause of work-related stress amongst general practitioners. Many health care centers recommend that patients turn off any mobile phones to avoid interruptions to the discussion with the physicians. Methods The purpose of this before and after study was to determine whether a printed reminder for turning off the mobile phone in the waiting room is helpful in decreasing the number of interruptions during consultation. A visual phone off sign utilizing the International "No" symbol of a diagonal line through a circle, along with a "please turn off your phone during consultation" reminder was used in the waiting room in the "after" period. Results A significant difference was found in the proportion of patients receiving or making a call during the consultation (8.8% vs. 13.5%, RR = 0.66; 95%CI 0.46–0.94; p = 0.021 and in the total number of calls (10.4% vs. 17.3%, RR = 0.60; 95%CI 0.44–0.83, p = 0.003 between the exposed and the non-exposed groups. However, no significant differences were found in the total time or the median time spent talking during consultation. The duration of the calls had median times of 20.5 seconds and 22.3 seconds in the exposed and the non-exposed groups respectively. Women from both groups who received a call during consultation answered significantly more when compared to men (70% vs. 52%; p = 0.05; Conclusion Our findings suggest that a printed reminder in the waiting room is helpful in decreasing the number of interruptions by mobile phone during consultation in our settings. The study provides the basis for further quantitative and qualitative research on this topic

Turn-taking in Human Communication--Origins and Implications for Language Processing.

Science.gov (United States)

Levinson, Stephen C

2016-01-01

Most language usage is interactive, involving rapid turn-taking. The turn-taking system has a number of striking properties: turns are short and responses are remarkably rapid, but turns are of varying length and often of very complex construction such that the underlying cognitive processing is highly compressed. Although neglected in cognitive science, the system has deep implications for language processing and acquisition that are only now becoming clear. Appearing earlier in ontogeny than linguistic competence, it is also found across all the major primate clades. This suggests a possible phylogenetic continuity, which may provide key insights into language evolution. Copyright © 2015 Elsevier Ltd. All rights reserved.

MATHEMATICAL MODEL AND METHODOLOGY FOR CALCULATION OF MINIMIZATION ON TURNING RADIUS OF TRACTOR UNIT WITH REPLACEABLE SUPPORTING AND MANEUVERING DEVICE

Directory of Open Access Journals (Sweden)

P. V. Zeleniy

2016-01-01

Full Text Available Smooth plowing with the help of reversible plows has replaced an enclosure method of soil treatment. The method may cause a formation of back ridges or open furrows. Due to this fact turnings of a tractor unit with a minimum radius required in order to ensure shuttle movements each time in the furrow of the preceding operating stroke have become a dominant type of turnings. Non-productive shift time is directly dependent on them and it is on the average 10–12 %, and it is up to 40 % in small contour areas with short run. Large non-productive time is connected with the desire to reduce headland width at field edges, and then a turning is made in several stages while using a complicated maneuvering. Therefore, an increase in efficiency of a plowing unit by means of minimization on its turning radius and execution of turning at one stage in the shortest possible time are considered as relevant objectives. In such a case it is necessary to take into account the fact that potential capabilities of universal tractors having established time-proved designs in respect of reduction of turning radius are practically at the end. So it is expedient to solve the matter at the expense of additional removable devices that ensure transformation of tractor wheel formula at the run end in order to reorient its position. Finally high quality plowing ensured by future-oriented reversible plows will be accompanied not only by output increase per shift, but also by decrease in headland width, their compaction and abrasion due to suspension systems and increase in productivity. The developed design having a novelty which proved by an invention patent and representing an additional supporting and maneuvering device significantly minimizes all the above-mentioned disadvantages and does not require any changes in tractor production design. Investigations have been carried on the following topic: “Minimization of turning radius for universal tractors by transformation

Virtual reality training improves turning capacity and functional reach in stroke patients

International Nuclear Information System (INIS)

Malik, A.N.; Masood, T.

2017-01-01

Objective: To determine the added effects of virtual reality training on turning capacity, gait parameters and functional reach capacity of stroke patients compared to task oriented training alone. Methodology: A randomized control trial was conducted from February 2016 to July 2106 at Physical Rehabilitation Department Pakistan Railway Hospital, Rawalpindi, Pakistan. Twenty stroke patients were selected through purposive sampling. The patients were randomly assigned through sealed envelope method into two groups; Task Oriented Training (TOT) and Virtual Reality Training (VRT) Group. The standardized tools were used for assessment. The TOT was provided for 4 days per week for 6 weeks while VRT group received additional exer-gaming training during sessions. Results: Significant improvement was observed in both groups regarding reaching forward, turning 360, gait pivot turn (p a 0.01) and FRT (p a 0.001). The two groups were statistically different from each other in terms of turning capacity, reaching forward, gait pivot turn and functional reach after 6 weeks of intervention (p a 0.05) Conclusion: Addition of virtual reality training further improves the significant improvement caused by task oriented training on turning capacity, reaching forward, gait pivot turn and functional reach in stroke patients. (author)

Bugs, bees and spiders : green roof design for rare invertebrates

Energy Technology Data Exchange (ETDEWEB)

Gedge, D. [Livingroofs.org, London (United Kingdom); Kadas, G. [Royal Holloway Univ. of London, London (United Kingdom)

2004-07-01

The use of green roofs as mitigation technique for biodiversity is particularly relevant for the objectives of the London Biodiversity Partnership, particularly since London is undergoing large-scale regeneration and many of the new developments will be targeted on brownfield land. In 2002 two research projects were undertaken to create a baseline of data on how invertebrates were using the current green roofs in London. The London Biodiversity Partnership's Black Redstart Action Plan conducts research into green roofs to demonstrate how they can be maximized for biodiversity. The Black Redstart Project ensures that green roofs are used in new developments in London where such developments threaten this species. It is one of the country's rarest breeding birds, and is unique in that it is predominantly found in cities, on brownfield sites and post-industrial sites. Three green roof laboratories were established at 2 sites in London to investigate how substrates, substrate depths and planting affects the fauna associated with brownfields and green roofs in London. Although conservationists in London have urged many developers to provide green roofs to help the Black Redstart, there is concern that many of these roofs do no provide the proper support for the species. In some cases roofs are constructed of commercially driven products such as sedum mats that do provide habitat for some rare invertebrates but are not as supportive of a greater diversity of species as they could be due to the design process and a lack of knowledge of green roof technology. It was suggested that there is a need for cooperation between ecologists and Architects in order to achieve the habitat. 18 refs., 6 figs.

Incorporating beta-turns and a turn mimetic out of context in loop 1 of the WW domain affords cooperatively folded beta-sheets.

Science.gov (United States)

Kaul, R; Angeles, A R; Jäger, M; Powers, E T; Kelly, J W

2001-06-06

To probe the conformational requirements of loop 1 in the Pin1 WW domain, the residues at the i + 2 and i + 3 positions of a beta-turn within this loop were replaced by dPro-Gly and Asn-Gly, which are known to prefer the conformations required at the i + 1 and i + 2 positions of type II' and type I' beta-turns. Conformational specificity or lack thereof was further examined by incorporating into the i + 2 and i + 3 positions a non-alpha-amino acid-based beta-turn mimetic (4-(2'-aminoethyl)-6-dibenzofuran propionic acid residue, 1), which was designed to replace the i + 1 and i + 2 positions of beta-turns. All these Pin WW variants are monomeric and folded as discerned by analytical ultracentrifugation, NMR, and CD. They exhibit cooperative two-state transitions and display thermodynamic stability within 0.5 kcal/mol of the wild-type WW domain, demonstrating that the acquisition of native structure and stability does not require a specific sequence and, by extension, conformation within loop 1. However, it could be that these loop 1 mutations alter the kinetics of antiparallel beta-sheet folding, which will be addressed by subsequent kinetic studies.

A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data

Energy Technology Data Exchange (ETDEWEB)

Yang, Xi [Brookhaven National Laboratory, Upton, Long Island, NY 11973 (United States); Huang, Xiaobiao, E-mail: xiahuang@slac.stanford.edu [SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States)

2016-08-21

We propose a method to simultaneously correct linear optics errors and linear coupling for storage rings using turn-by-turn (TbT) beam position monitor (BPM) data. The independent component analysis (ICA) method is used to isolate the betatron normal modes from the measured TbT BPM data. The betatron amplitudes and phase advances of the projections of the normal modes on the horizontal and vertical planes are then extracted, which, combined with dispersion measurement, are used to fit the lattice model. The fitting results are used for lattice correction. The method has been successfully demonstrated on the NSLS-II storage ring.

A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data

Energy Technology Data Exchange (ETDEWEB)

Yang, Xi [Brookhaven National Lab. (BNL), Upton, NY (United States); Huang, Xiaobiao [SLAC National Accelerator Lab., Menlo Park, CA (United States)

2016-08-01

We propose a method to simultaneously correct linear optics errors and linear coupling for storage rings using turn-by-turn (TbT) beam position monitor (BPM) data. The independent component analysis (ICA) method is used to isolate the betatron normal modes from the measured TbT BPM data. The betatron amplitudes and phase advances of the projections of the normal modes on the horizontal and vertical planes are then extracted, which, combined with dispersion measurement, are used to fit the lattice model. Furthermore, the fitting results are used for lattice correction. Our method has been successfully demonstrated on the NSLS-II storage ring.

[Abnormal head turn in a patient with Brown's syndrome].

Science.gov (United States)

van Waveren, M; Krzizok, T; Besch, D

2008-08-01

We report on an eight-year-old boy, who was presented in our clinic because of head turn. The cause of the tortecollis (ocular or general) in this case was and still cannot be explained. Only by applying extensive prism adaptation tests it was possible to prove the ocular character of the head turn. An eight-year-old boy with Brown's syndrome was referred to us because of a head tilt to the left side. Six months previously surgery on the M. obl. superior of the right eye was performed in another clinic. No improvement of the head tilt could be observed after the operation. In addition, an exotropia became decompensated. Under a 3-day occlusion of one eye, no change of the head turn and the squint could be measured. No other cause of the head turn could be found by an orthopaedist and a paediatrist. Under a prism of 20 cm/m basis in and 10 cm/m basis against the positive vertical deviation, the head tilt decreased, so that we decided to do a second surgery. The head tilting had not resumed at one year after the surgery. Although the initial diagnostic findings ruled out an ocular cause, it was possible to lessen the head tilting with the aid of the prism adaptation test. This case study emphasises the usefulness of a prism adaptation test of several days duration in order to validate an ocular cause of head turn and to determine an adequate indication for surgery.

How turn-taking strategies influence users’ impressions of an agent

NARCIS (Netherlands)

ter Maat, Mark; Truong, Khiet Phuong; Heylen, Dirk K.J.; Allbeck, Jan; Badler, Norman; Bickmore, Timothy; Pelachaud, Catherine; Safonova, Alla

Different turn-taking strategies of an agent influence the impression that people have of it. We recorded conversations of a human with an interviewing agent, controlled by a wizard and using a particular turn-taking strategy. A questionnaire with 27 semantic differential scales concerning

Observation of diamond turned OFHC copper using Scanning Tunneling Microscopy

Energy Technology Data Exchange (ETDEWEB)

Grigg, D.A.; Russell, P.E.; Dow, T.A.

1988-12-01

Diamond turned OFHC copper samples have been observed within the past few months using the Scanning Tunneling Microscope. Initial results have shown evidence of artifacts which may be used to better understand the diamond turning process. The STM`s high resolution capability and three dimensional data representation allows observation and study of surface features unobtainable with conventional profilometry systems. Also, the STM offers a better quantitative means by which to analyze surface structures than the SEM. This paper discusses findings on several diamond turned OFHC copper samples having different cutting conditions. Each sample has been cross referenced using STM and SEM.

Going Online: Helping Technical Communicators Help Translators.

Science.gov (United States)

Flint, Patricia; Lord van Slyke, Melanie; Starke-Meyerring, Doreen; Thompson, Aimee

1999-01-01

Explains why technical communicators should help translators. Offers tips for creating "translation-friendly" documentation. Describes the research and design process used by the authors to create an online tutorial that provides technical communicators at a medical technology company the information they need to help them write and…

Evaluation of cutting force uncertainty components in turning

DEFF Research Database (Denmark)

Axinte, Dragos Aurelian; Belluco, Walter; De Chiffre, Leonardo

2000-01-01

A procedure is proposed for the evaluation of those uncertainty components of a single cutting force measurement in turning that are related to the contributions of the dynamometer calibration and the cutting process itself. Based on an empirical model including errors form both sources......, the uncertainty for a single measurement of cutting force is presented, and expressions for the expected uncertainty vs. cutting parameters are proposed. This approach gives the possibility of evaluating cutting force uncertainty components in turning, for a defined range of cutting parameters, based on few...

Causal Role of Motor Simulation in Turn-Taking Behavior.

Science.gov (United States)

Hadley, Lauren V; Novembre, Giacomo; Keller, Peter E; Pickering, Martin J

2015-12-16

Overlap between sensory and motor representations has been documented for a range of human actions, from grasping (Rizzolatti et al., 1996b) to playing a musical instrument (Novembre and Keller, 2014). Such overlap suggests that individuals use motor simulation to predict the outcome of observed actions (Wolpert, 1997). Here we investigate motor simulation as a basis of human communication. Using a musical turn-taking task, we show that pianists call on motor representations of their partner's part to predict when to come in for their own turn. Pianists played alternating solos with a videoed partner, and double-pulse transcranial magnetic stimulation was applied around the turn-switch to temporarily disrupt processing in two cortical regions implicated previously in different forms of motor simulation: (1) the dorsal premotor cortex (dPMC), associated with automatic motor resonance during passive observation of hand actions, especially when the actions are familiar (Lahav et al., 2007); and (2) the supplementary motor area (SMA), involved in active motor imagery, especially when the actions are familiar (Baumann et al., 2007). Stimulation of the right dPMC decreased the temporal accuracy of pianists' (right-hand) entries relative to sham when the partner's (left-hand) part had been rehearsed previously. This effect did not occur for dPMC stimulation without rehearsal or for SMA stimulation. These findings support the role of the dPMC in predicting the time course of observed actions via resonance-based motor simulation during turn-taking. Because turn-taking spans multiple modes of human interaction, we suggest that simulation is a foundational mechanism underlying the temporal dynamics of joint action. Even during passive observation, seeing or hearing somebody execute an action from within our repertoire activates motor cortices of our brain. But what is the functional relevance of such "motor simulation"? By combining a musical duet task with a real

Factors influencing turning and its relationship with falls in individuals with Parkinson's disease.

Directory of Open Access Journals (Sweden)

Fang-Yu Cheng

Full Text Available BACKGROUND: Falls are a major problem for people with Parkinson's disease (PD. Many studies indicate that more than 50% of people with PD have difficulty in turning that may lead to falls during daily activities. The aims of this study were to identify the relationship between turning performance and falls, and to determine the factors that influence turning performance. METHODS: This study examined 45 patients with idiopathic PD (Hoehn and Yahr stage 1-3 using a battery of tests, including 180° turn time, balance, and muscle strength. The levels of disease severity and freezing of gait were also measured. The number of falls in the past 6 months was recorded. RESULTS: Sixteen out of forty-five participants experienced falls in the past 6 months. A receiver operating characteristic curve showed that turn time was highly related to falls [more affected side: sensitivity = 0.81, specificity = 0.79, area under the curve (AUC = 0.83; less affected side: sensitivity = 0.88, specificity = 0.76, AUC = 0.83]. The most important factor influencing turn time was balance ability (both sides: p = 0.000 according to the regression model. Correlations between turn time and dynamic balance were further established with reaction time, movement velocity, endpoint excursion, and maximal excursion of the LOS (limits of stability test. CONCLUSION: The time needed to complete a 180° turn during the SQT (step/quick turn test is a good index to differentiate fallers from non-fallers in persons with PD. Turn time is most influenced by balance. Furthermore, balance control, especially in an anterior or sideways direction, is important for turning performance.

A model of sexually and physically victimized women's process of attaining effective formal help over time: the role of social location, context, and intervention.

Science.gov (United States)

Kennedy, Angie C; Adams, Adrienne; Bybee, Deborah; Campbell, Rebecca; Kubiak, Sheryl Pimlott; Sullivan, Cris

2012-09-01

As empirical evidence has demonstrated the pervasiveness of sexual assault and intimate partner violence in the lives of women, and the links to poor mental health outcomes, attention has turned to examining how women seek and access formal help. We present a conceptual model that addresses prior limitations and makes three key contributions: It foregrounds the influence of social location and multiple contextual factors; emphasizes the importance of the attainment of effective formal help that meets women's needs and leads to positive mental health outcomes; and highlights the role of interventions in facilitating help attainment. We conclude with research and practice implications.

Constraining eye movement in individuals with Parkinson's disease during walking turns.

Science.gov (United States)

Ambati, V N Pradeep; Saucedo, Fabricio; Murray, Nicholas G; Powell, Douglas W; Reed-Jones, Rebecca J

2016-10-01

Walking and turning is a movement that places individuals with Parkinson's disease (PD) at increased risk for fall-related injury. However, turning is an essential movement in activities of daily living, making up to 45 % of the total steps taken in a given day. Hypotheses regarding how turning is controlled suggest an essential role of anticipatory eye movements to provide feedforward information for body coordination. However, little research has investigated control of turning in individuals with PD with specific consideration for eye movements. The purpose of this study was to examine eye movement behavior and body segment coordination in individuals with PD during walking turns. Three experimental groups, a group of individuals with PD, a group of healthy young adults (YAC), and a group of healthy older adults (OAC), performed walking and turning tasks under two visual conditions: free gaze and fixed gaze. Whole-body motion capture and eye tracking characterized body segment coordination and eye movement behavior during walking trials. Statistical analysis revealed significant main effects of group (PD, YAC, and OAC) and visual condition (free and fixed gaze) on timing of segment rotation and horizontal eye movement. Within group comparisons, revealed timing of eye and head movement was significantly different between the free and fixed gaze conditions for YAC (p  0.05). In addition, while intersegment timings (reflecting segment coordination) were significantly different for YAC and OAC during free gaze (p training programs for those with PD, possibly promoting better coordination during turning and potentially reducing the risk of falls.

On the evolving portfolio of community-standards and data sharing policies: turning challenges into new opportunities

Directory of Open Access Journals (Sweden)

Sansone Susanna-Assunta

2012-07-01

Full Text Available Abstract There are thousands of biology databases with hundreds of terminologies, reporting guidelines, representations models, and exchange formats to help annotate, report, and share bioscience investigations. It is evident, however, that researchers and bioinformaticians struggle to navigate the various standards and to find the appropriate database to collect, manage, and share data. Further, policy makers, funders, and publishers lack sufficient information to formulate their guidelines. In this paper, we highlight a number of key issues that can be used to turn these challenges into new opportunities. It is time for all stakeholders to work together to reconcile cause and effect and make the data-sharing culture functional and efficient.

'Help me! I'm old!' How negative aging stereotypes create dependency among older adults.

Science.gov (United States)

Coudin, Genevieve; Alexopoulos, Theodore

2010-07-01

This study examined the effects of negative aging stereotypes on self-reported loneliness, risk-taking, subjective health, and help-seeking behavior in a French sample of older adults. The aim of this study was to show the detrimental effects of negative aging stereotypes on older adults' self-evaluations and behaviors, therefore contributing to the explanations of the iatrogenic effect of social environments that increase dependency (e.g., health care institutions). In the first experiment conducted on 57 older adults, we explored the effects of positive, neutral, or negative stereotype activation on the feeling of loneliness and risk taking decision. The second experiment (n = 60) examined the impact of stereotype activation on subjective health, self-reported extraversion as well as on a genuine help-seeking behavior, by allowing participants to ask for the experimenter's help while completing a task. As predicted, negative stereotype activation resulted in lower levels of risk taking, subjective health and extraversion, and in higher feelings of loneliness and a more frequent help-seeking behavior. These findings suggest that the mere activation of negative stereotypes can have broad and deleterious effects on older individuals' self-evaluation and functioning, which in turn may contribute to the often observed dependency among older people.

Computation of the Coupling Resonance Driving term f1001 and the coupling coefficient C from turn-by-turn single-BPM data.

CERN Document Server

Franchi, A; Vanbavinkhove, G; CERN. Geneva. BE Department

2010-01-01

In this note we show how to compute the Resonance Driving Term (RDT) f1001, the local resonance term chi 1010 and the coupling coefficient C from the spectrum of turn-by-turn single-BPM data. The harmonic analysis of real coordinate x(y) is model independent, conversely to the the analysis of the complex Courant-Snyder coordinate hx,- = x-ipx. From the computation of f1001 along the ring is closely related to the global coupling coefficient C, but it is affected by an intrinsic error, discussed in this note.

Turn-Taking Based on Information Flow for Fluent Human-Robot Interaction

OpenAIRE

Thomaz, Andrea L.; Chao, Crystal

2011-01-01

Turn-taking is a fundamental part of human communication. Our goal is to devise a turn-taking framework for human-robot interaction that, like the human skill, represents something fundamental about interaction, generic to context or domain. We propose a model of turn-taking, and conduct an experiment with human subjects to inform this model. Our findings from this study suggest that information flow is an integral part of human floor-passing behavior. Following this, we implement autonomous ...

Roles of beta-turns in protein folding: from peptide models to protein engineering.

Science.gov (United States)

Marcelino, Anna Marie C; Gierasch, Lila M

2008-05-01

Reverse turns are a major class of protein secondary structure; they represent sites of chain reversal and thus sites where the globular character of a protein is created. It has been speculated for many years that turns may nucleate the formation of structure in protein folding, as their propensity to occur will favor the approximation of their flanking regions and their general tendency to be hydrophilic will favor their disposition at the solvent-accessible surface. Reverse turns are local features, and it is therefore not surprising that their structural properties have been extensively studied using peptide models. In this article, we review research on peptide models of turns to test the hypothesis that the propensities of turns to form in short peptides will relate to the roles of corresponding sequences in protein folding. Turns with significant stability as isolated entities should actively promote the folding of a protein, and by contrast, turn sequences that merely allow the chain to adopt conformations required for chain reversal are predicted to be passive in the folding mechanism. We discuss results of protein engineering studies of the roles of turn residues in folding mechanisms. Factors that correlate with the importance of turns in folding indeed include their intrinsic stability, as well as their topological context and their participation in hydrophobic networks within the protein's structure.

Measurement of tool forces in diamond turning

Energy Technology Data Exchange (ETDEWEB)

Drescher, J.; Dow, T.A.

1988-12-01

A dynamometer has been designed and built to measure forces in diamond turning. The design includes a 3-component, piezoelectric transducer. Initial experiments with this dynamometer system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. Many cutting experiments have been conducted on OFHC Copper and 6061-T6 Aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool forces. Velocity has been determined to have negligible effects between 4 and 21 m/s. Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a simple model may not be sufficient to describe the forces produced in the diamond turning process.

Kinematical Comparison of the 200 m Backstroke Turns between National and Regional Level Swimmers

Science.gov (United States)

Veiga, Santiago; Cala, Antonio; Frutos, Pablo González; Navarro, Enrique

2013-01-01

The aims of this investigation were to determine the evolution of selected turn variables during competitive backstroke races and to compare these kinematic variables between two different levels of swimmers. Sixteen national and regional level male swimmers participant in the 200 m backstroke event at the Spanish Swimming Championships in short course (25 m) were selected to analyze their turn performances. The individual distances method with two-dimensional Direct Linear Transformation (2D-DLT) algorithms was used to perform race analyses. National level swimmers presented a shorter “turn time”, a longer “distance in”, a faster “underwater velocity” and “normalized underwater velocity”, and a faster “stroking velocity” than regional level swimmers, whereas no significant differences were detected between levels for the “underwater distance”. National level swimmers maintained similar “turn times” over the event and increased “underwater velocity” and “normalized underwater velocity” in the last (seventh) turn segment, whereas regional level swimmers increased “turn time” in the last half of the race. For both national and regional level swimmers, turn “underwater distance” during the last three turns of the race was significantly shorter while no significant differences in distance into the wall occurred throughout the race. The skill level of the swimmers has an impact on the competitive backstroke turn segments. In a 200 m event, the underwater velocity should be maximized to maintain turn proficiency, whereas turn distance must be subordinated to the average velocity. Key Points The underwater turn velocity is as a critical variable related to the swimmers’ level of skill in a 200 m backstroke event. Best swimmers perform faster but no longer turn segments during a 200 m backstroke event. Best swimmers maintain their turn performance throughout the 200 m backstroke event by increasing the underwater velocity

Part-turn gearboxes for electric actuators; Schwenkgetriebe fuer elektrische Stellantriebe

Energy Technology Data Exchange (ETDEWEB)

Herbstritt, M. [Riester (W.) GmbH und Co. KG, Muellheim (Germany)

2002-09-01

Different types of gearboxes provide a useful complement to the electric actuator type ranges. The gearboxes can be combined with the actuators in many ways. Multi-turn actuators, for example, can be turned into part-turn actuators. When using a modular system, a suitable solution for almost any automation task in the field of industrial valves can be found. (orig.) [German] Sinnvoll ergaenzt werden elektrische Stellantriebe fuer Armaturen durch verschiedene Arten von Getrieben. Die Getriebe sind in vielfaeltiger Weise mit den Stellantrieben kombinierbar. So werden beispielsweise aus Drehantrieben Schwenkantriebe. Mit einem Baukasten-System laesst sich so fuer nahezu jede Automatisierungsaufgabe im Bereich der Industriearmaturen eine passende Loesung finden. (orig.)

Universal compact lower limb turning module intended for use in orthotic robots

Directory of Open Access Journals (Sweden)

Janowski Mateusz

2018-01-01

Full Text Available In this paper, a model of an orthotic robot’s lower limb rotation system is presented. The system is intended for use in typical contemporary orthotic robots such as the ‘Veni-Prometheus’ System for Verticalization and Aiding Motion designed at the Faculty of Mechatronics, Warsaw University of Technology. In the paper, the state of the art is briefly stated, with the relatively low number of orthotic robots allowing realization of pivoting turns highlighted. The intended two-stage pivoting turning movement is analyzed in detail and the operating conditions as well as limitations of the turning module are indicated. The conception of a turning module introduces additional degree of freedom to the existing orthotic robot designs by realizing the rotation about the lengthwise axis in the thigh link. A three-dimensional model and its analysis are shown. The proposed design ensures the necessary movement of the lower limb and the torso of an impaired person during the execution of pivoting turn while remaining compact in order to ease the introduction of the turning system to different orthotic robot designs.

Analyses of quenching process during turn-off of plasma electrolytic carburizing on carbon steel

International Nuclear Information System (INIS)

Wu, Jie; Liu, Run; Xue, Wenbin; Wang, Bin; Jin, Xiaoyue; Du, Jiancheng

2014-01-01

Highlights: • Cooling rate of carburized steel at the end of PEC treatment is measured. • The quench hardening in the fast or slow turn-off mode hardly takes place. • Decrease of the surface roughness during slow turn-off process is found. • A slow turn-off mode is recommended to replace the conventional turn-off mode. - Abstract: Plasma electrolytic carburizing (PEC) under different turn-off modes was employed to fabricate a hardening layer on carbon steel in glycerol solution without stirring at 380 V for 3 min. The quenching process in fast turn-off mode or slow turn-off mode of power supply was discussed. The temperature in the interior of steel and electron temperature in plasma discharge envelope during the quenching process were evaluated. It was found that the cooling rates of PEC samples in both turn-off modes were below 20 °C/s, because the vapor film boiling around the steel sample reduced the cooling rate greatly in terms of Leidenfrost effect. Thus the quench hardening hardly took place, though the slow turn-off mode slightly decreased the surface roughness of PEC steel. At the end of PEC treatment, the fast turn-off mode used widely at present cannot enhance the surface hardness by quench hardening, and the slow turn-off mode was recommended in order to protect the electronic devices against a large current surge

A Practice Turn for Teacher Education?

Science.gov (United States)

Reid, Jo-Anne

2011-01-01

Within the Research Institute for Professional Practice, Learning and Education (RIPPLE) at Charles Sturt University, teacher education researchers have been quick to respond to the opportunities created by what is known as "the practice turn" that characterises contemporary theory around the globe and across disciplines. We are working,…

The Dynamic Turn in Quantum Logic

NARCIS (Netherlands)

Baltag, A.; Smets, S.

2012-01-01

In this paper we show how ideas coming from two areas of research in logic can reinforce each other. The first such line of inquiry concerns the "dynamic turn" in logic and especially the formalisms inspired by Propositional Dynamic Logic (PDL); while the second line concerns research into the

The dynamic turn in quantum logic

NARCIS (Netherlands)

Baltag, Alexandru; Smets, Sonja

In this paper we show how ideas coming from two areas of research in logic can reinforce each other. The first such line of inquiry concerns the "dynamic turn" in logic and especially the formalisms inspired by Propositional Dynamic Logic (PDL); while the second line concerns research into the

Novel β-amyloid aggregation inhibitors possessing a turn mimic.

Science.gov (United States)

Hamada, Yoshio; Miyamoto, Naoko; Kiso, Yoshiaki

2015-04-01

Amyloid β peptide, the main component of senile plaques found in the brain of Alzheimer disease (AD) patients, is a molecular target for AD therapeutic intervention. A number of potential AD therapeutics have been reported, including inhibitors of β-secretase, γ-secretase, and Aβ aggregation, and anti-amyloid agents, such as neprilysin, insulin degrading enzyme (IDE), and Aβ antibodies. Recently, we reported potent small-sized β-secretase (BACE1) inhibitors, which could serve as anti-AD drugs. However AD is a progressive disorder, where dementia symptoms gradually worsen over several decades, and therefore may require many years to get cured. One possible way to achieve a greater therapeutic effect is through simultaneous administration of multiple drugs, similar to those used in Highly Active Anti-Retroviral Therapy (HAART) used to treat AIDS. In order to overcome AD, we took a drug discovery approach to evaluate, novel β-amyloid aggregation inhibitors. Previously, we reported that a tong-type compound possessing a turn mimic as the inhibitor of HIV-1 protease dimerization. Oligomerized amyloid β peptides contain a turn structure within the molecule. Here, we designed and synthesized novel β-amyloid aggregation inhibitors with a turn-mimic template, based on the turn conformer of the oligomerized amyloid β peptides. Copyright © 2015 Elsevier Ltd. All rights reserved.

A high performance gate drive for large gate turn off thyristors

Energy Technology Data Exchange (ETDEWEB)

Szilagyi, C.P.

1993-01-01

Past approaches to gate turn-off (GTO) gating are application oriented, inefficient and dissipate power even when inactive. They allow the gate to avalanch, and do not reduce GTO turn-on and turn-off losses. A new approach is proposed which will allow modular construction and adaptability to large GTOs in the 50 amp to 2000 amp range. The proposed gate driver can be used in large voltage source and current source inverters and other power converters. The approach consists of a power metal-oxide-silicon field effect transistor (MOSFET) technology gating unit, with associated logic and supervisory circuits and an isolated flyback converter as the dc power source for the gating unit. The gate driver formed by the gating unit and the flyback converter is designed for 4000 V isolation. Control and supervisory signals are exchanged between the gate driver and the remote control system via fiber optics. The gating unit has programmable front-porch current amplitude and pulse-width, programmable closed-loop controlled back-porch current, and a turn-off switch capable of supplying negative gate current at demand as a function of peak controllable forward anode current. The GTO turn-on, turn-off and gate avalanch losses are reduced to a minimum. The gate driver itself has minimum operating losses. Analysis, design and practical realization are reported. 19 refs., 54 figs., 1 tab.

Turn-on delay of QD and QW laser diodes: What is the difference?

International Nuclear Information System (INIS)

Sokolovskii, G S; Dudelev, V V; Kolykhalova, E D; Deryagin, A G; Maximov, M V; Nadtochiy, A M; Kuchinskii, V I; Mikhrin, S S; Livshits, D A; Viktorov, E A; Erneux, T

2013-01-01

Turn-on delay of laser diodes with quantum-sized active media is investigated both theoretically and experimentally. In this research we show the striking difference in turn-on delay of quantum dot and quantum well laser diodes: With quantum-well lasers turn on delay tends to zero in the limit of high pumping, while with quantum dot lasers turn-on delay has the non-vanishing component which is independent of pumping

Extended phenotype: nematodes turn ants into bird-dispersed fruits

DEFF Research Database (Denmark)

Hughes, D P; Kronauer, D J C; Boomsma, J J

2008-01-01

A recent study has discovered a novel extended phenotype of a nematode which alters its ant host to resemble ripe fruit. The infected ants are in turn eaten by frugivorous birds that disperse the nematode's eggs.......A recent study has discovered a novel extended phenotype of a nematode which alters its ant host to resemble ripe fruit. The infected ants are in turn eaten by frugivorous birds that disperse the nematode's eggs....

Virtual turning points

CERN Document Server

Honda, Naofumi; Takei, Yoshitsugu

2015-01-01

The discovery of a virtual turning point truly is a breakthrough in WKB analysis of higher order differential equations. This monograph expounds the core part of its theory together with its application to the analysis of higher order Painlevé equations of the Noumi–Yamada type and to the analysis of non-adiabatic transition probability problems in three levels. As M.V. Fedoryuk once lamented, global asymptotic analysis of higher order differential equations had been thought to be impossible to construct. In 1982, however, H.L. Berk, W.M. Nevins, and K.V. Roberts published a remarkable paper in the Journal of Mathematical Physics indicating that the traditional Stokes geometry cannot globally describe the Stokes phenomena of solutions of higher order equations; a new Stokes curve is necessary.

Turning lead into gold

DEFF Research Database (Denmark)

Jensen, Steffen Moltrup Ernø

For years the field of entrepreneurship has been blinded by the alchemical promise of turning lead into gold, of finding the ones most likely to become the next Branson, Zuckerberg or Gates. The promise has been created in the midst of political and scientific agendas where certain individuals...... is not to accumulate state or market wealth, but for entrepreneurial skills to become tools towards the liberation of the individual from oppressive systems of control – essentially to add public value rather than economic value. In this presentation I will sketch an anarchist perspective on entrepreneurship, looking...

Greywater turns to gold: Treatment units to help low-income ...

International Development Research Centre (IDRC) Digital Library (Canada)

2011-02-08

Feb 8, 2011 ... In Jordan, the demand for freshwater already exceeds the supply. With no new sources to tap, Jordanians must find ways to reduce their demand and make better use of existing supplies. One of option being pursued is greywater reuse. In a series of projects supported by Canada's International ...

Help-Seeking and Help-Giving for Teen Dating Violence

Science.gov (United States)

Weisz, Arlene N.; Black, Beverly M.

2009-01-01

This article is based on numerous research projects conducted by the authors on adolescent dating violence. It reviews the results of those projects as they relate to how teens seek help for dating violence and how teens provide help to their friends in violent dating relationships. It concludes with helpful strategies for adults who work with…

The Timed 180° Turn Test for Assessing People with Hemiplegia from Chronic Stroke

Directory of Open Access Journals (Sweden)

Regan L. Robinson

2018-01-01

Full Text Available Background. Turning is ubiquitous in activities of daily living. For people with hemiplegia, persistent impairments in strength, balance, and coordination will affect their ability to turn safely. Consequently, turning retraining should be addressed in rehabilitation programs. To measure turning for these individuals, a reliable clinical tool is required. Objective. To investigate (i the intrarater, interrater, and test-retest reliability of the timed 180° turn test; (ii the correlation of the timed 180° turn test with other measures of stroke-specific impairments; and (iii the cut-off time that best discriminates individuals with hemiplegia from chronic stroke and healthy older adults. Methods. 33 individuals with hemiplegia due to chronic stroke and 32 healthy elderly individuals participated in this cross-sectional study. The timed 180° turn test was administered along with other measures of stroke-specific impairment. Results. The timed 180° turn test demonstrated excellent intrarater, interrater, and test-retest reliability in individuals with hemiplegia from chronic stroke. The timed 180° turn test (times significantly correlated with the Fugl-Meyer Assessment of the Lower Extremities (FMA-LE, affected ankle plantar flexion strength, the 5-Times-Sit-To-Stand test, the Berg Balance Scale (BBS, and the Timed Up and Go (TUG test. Conclusion. The timed 180° turn test is a reliable clinical tool to assess the turning ability of subjects with hemiplegia from chronic stroke.

Turning points in reactor design

International Nuclear Information System (INIS)

Beckjord, E.S.

1995-01-01

This article provides some historical aspects on nuclear reactor design, beginning with PWR development for Naval Propulsion and the first commercial application at Yankee Rowe. Five turning points in reactor design and some safety problems associated with them are reviewed: (1) stability of Dresden-1, (2) ECCS, (3) PRA, (4) TMI-2, and (5) advanced passive LWR designs. While the emphasis is on the thermal-hydraulic aspects, the discussion is also about reactor systems

Turning points in reactor design

Energy Technology Data Exchange (ETDEWEB)

Beckjord, E.S.

1995-09-01

This article provides some historical aspects on nuclear reactor design, beginning with PWR development for Naval Propulsion and the first commercial application at Yankee Rowe. Five turning points in reactor design and some safety problems associated with them are reviewed: (1) stability of Dresden-1, (2) ECCS, (3) PRA, (4) TMI-2, and (5) advanced passive LWR designs. While the emphasis is on the thermal-hydraulic aspects, the discussion is also about reactor systems.

In silico platform for predicting and initiating β-turns in a protein at desired locations.

Science.gov (United States)

Singh, Harinder; Singh, Sandeep; Raghava, Gajendra P S

2015-05-01

Numerous studies have been performed for analysis and prediction of β-turns in a protein. This study focuses on analyzing, predicting, and designing of β-turns to understand the preference of amino acids in β-turn formation. We analyzed around 20,000 PDB chains to understand the preference of residues or pair of residues at different positions in β-turns. Based on the results, a propensity-based method has been developed for predicting β-turns with an accuracy of 82%. We introduced a new approach entitled "Turn level prediction method," which predicts the complete β-turn rather than focusing on the residues in a β-turn. Finally, we developed BetaTPred3, a Random forest based method for predicting β-turns by utilizing various features of four residues present in β-turns. The BetaTPred3 achieved an accuracy of 79% with 0.51 MCC that is comparable or better than existing methods on BT426 dataset. Additionally, models were developed to predict β-turn types with better performance than other methods available in the literature. In order to improve the quality of prediction of turns, we developed prediction models on a large and latest dataset of 6376 nonredundant protein chains. Based on this study, a web server has been developed for prediction of β-turns and their types in proteins. This web server also predicts minimum number of mutations required to initiate or break a β-turn in a protein at specified location of a protein. © 2015 Wiley Periodicals, Inc.

Racial and ethnic minority college students' stigma associated with seeking psychological help: Examining psychocultural correlates.

Science.gov (United States)

Cheng, Hsiu-Lan; Kwan, Kwong-Liem Karl; Sevig, Todd

2013-01-01

Many college students underuse professional psychological help for mental health difficulties. The stigma associated with seeking such help appears to be one of the reasons for this underuse. Levels of psychological distress and past use of counseling/psychotherapy have been found to be important correlates of stigma associated with seeking psychological help (Obasi & Leong, 2009; Vogel, Wade, & Haake, 2006). For racial and ethnic minorities, the hindering effects of self-stigma and perceived stigmatization by others on treatment seeking may further be compounded by their relationships with their own ethnic groups, with other ethnic groups, and with the dominant society. This study used structural equation modeling (SEM) to test a model that explored the effects of psychological distress and psychocultural variables (i.e., ethnic identity, other-group orientation, perceived discrimination) on perceived stigmatization by others and self-stigma for seeking psychological help, controlling for past use of counseling/psychotherapy. The sample consisted of 260 African American, 166 Asian American, and 183 Latino American students. SEM multigroup analyses indicated measurement invariance, but partial structural invariance, across racial/ethnic groups. Across all 3 groups, higher levels of psychological distress and perceived racial/ethnic discrimination, respectively, predicted higher levels of perceived stigmatization by others for seeking psychological help, which, in turn, predicted greater self-stigma for seeking psychological help. Higher levels of other-group orientation predicted lower levels of self-stigma of seeking psychological help across groups. Higher levels of ethnic identity predicted lower levels of self-stigma of seeking psychological help only for African Americans. Implications for research and practice are discussed. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Kinematical Comparison of the 200 m Backstroke Turns between National and Regional Level Swimmers

Directory of Open Access Journals (Sweden)

Santiago Veiga

2013-12-01

Full Text Available The aims of this investigation were to determine the evolution of selected turn variables during competitive backstroke races and to compare these kinematic variables between two different levels of swimmers. Sixteen national and regional level male swimmers participant in the 200 m backstroke event at the Spanish Swimming Championships in short course (25 m were selected to analyze their turn performances. The individual distances method with two-dimensional Direct Linear Transformation (2D-DLT algorithms was used to perform race analyses. National level swimmers presented a shorter “turn time”, a longer “distance in”, a faster “underwater velocity” and “normalized underwater velocity”, and a faster “stroking velocity” than regional level swimmers, whereas no significant differences were detected between levels for the “underwater distance”. National level swimmers maintained similar “turn times” over the event and increased “underwater velocity” and “normalized underwater velocity” in the last (seventh turn segment, whereas regional level swimmers increased “turn time” in the last half of the race. For both national and regional level swimmers, turn “underwater distance” during the last three turns of the race was significantly shorter while no significant differences in distance into the wall occurred throughout the race. The skill level of the swimmers has an impact on the competitive backstroke turn segments. In a 200 m event, the underwater velocity should be maximized to maintain turn proficiency, whereas turn distance must be subordinated to the average velocity.

Prediction of beta-turns in proteins using the first-order Markov models.

Science.gov (United States)

Lin, Thy-Hou; Wang, Ging-Ming; Wang, Yen-Tseng

2002-01-01

We present a method based on the first-order Markov models for predicting simple beta-turns and loops containing multiple turns in proteins. Sequences of 338 proteins in a database are divided using the published turn criteria into the following three regions, namely, the turn, the boundary, and the nonturn ones. A transition probability matrix is constructed for either the turn or the nonturn region using the weighted transition probabilities computed for dipeptides identified from each region. There are two such matrices constructed for the boundary region since the transition probabilities for dipeptides immediately preceding or following a turn are different. The window used for scanning a protein sequence from amino (N-) to carboxyl (C-) terminal is a hexapeptide since the transition probability computed for a turn tetrapeptide is capped at both the N- and C- termini with a boundary transition probability indexed respectively from the two boundary transition matrices. A sum of the averaged product of the transition probabilities of all the hexapeptides involving each residue is computed. This is then weighted with a probability computed from assuming that all the hexapeptides are from the nonturn region to give the final prediction quantity. Both simple beta-turns and loops containing multiple turns in a protein are then identified by the rising of the prediction quantity computed. The performance of the prediction scheme or the percentage (%) of correct prediction is evaluated through computation of Matthews correlation coefficients for each protein predicted. It is found that the prediction method is capable of giving prediction results with better correlation between the percent of correct prediction and the Matthews correlation coefficients for a group of test proteins as compared with those predicted using some secondary structural prediction methods. The prediction accuracy for about 40% of proteins in the database or 50% of proteins in the test set is

Egg turning behavior and incubation temperature in Forster’s terns in relation to mercury contamination

Science.gov (United States)

Taylor, Gregory T.; Ackerman, Joshua T.; Shaffer, Scott A.

2018-01-01

Egg turning behavior is an important determinant of egg hatchability, but it remains relatively understudied. Here, we examined egg turning rates and egg temperatures in Forster’s terns (Sterna forsteri). We used artificial eggs containing a data logger with a 3-D accelerometer, a magnetometer, and a temperature thermistor to monitor parental incubation behavior of 131 tern nests. Overall, adults turned their eggs an average (±SD) of 3.8 ± 0.8 turns h-1, which is nearly two times higher than that of other seabirds. Egg turning rates increased with nest initiation date. We also examined egg turning rates and egg temperatures in relation to egg mercury contamination. Mercury contamination has been shown to be associated with reduced egg hatchability, and we hypothesized that mercury may decrease egg hatchability via altered egg turning behavior by parents. Despite the high variability in egg turning rates among individuals, the rate of egg turning was not related to mercury concentrations in sibling eggs. These findings highlight the need for further study concerning the potential determinants of egg turning behavior.

Treatment of uranium turning with the controllable oxidizing process

International Nuclear Information System (INIS)

Shen Bingyi; Zhang Yonggang; Zhen Huikuan

1989-02-01

The concept, procedure and safety measures of the controllable oxidizing for uranium turning is described. The feasibility study on technological process has been made. The process provided several advantages such as: simplicity of operation, no pollution environment, safety, high efficiency and low energy consumption. The process can yield nuclear pure uranium dioxide under making no use of a great number of chemical reagent. It may supply raw material for fluoration and provide a simply method of treatment for safe store of uranium turning

Turning Technology into Business Using University Patents

NARCIS (Netherlands)

Hartmann, L.

2014-01-01

We present an education paradigm that stimulates innovation and entrepreneurship through a master's-level university course: "Turning Technology into Business". The course was specifically designed to connect technological research with education using patented technologies developed at the research

Competence skills help deter smoking among inner city adolescents.

Science.gov (United States)

Epstein, J A; Griffin, K W; Botvin, G J

2000-03-01

To test whether higher levels of general competence are linked to more frequent use of refusal assertiveness that is in turn related to less subsequent smoking among inner city adolescents. Longitudinal study conducted during three year middle school or junior high school period. A sample of 1459 students attending 22 middle (ages 11-14 years) and junior high (ages 12-15 years) schools in New York City participated. Students completed surveys at baseline, one year follow up, and two year follow up. The students self reported smoking, decision making skills, personal efficacy, and refusal assertiveness. Teams of three to five data collectors administered the questionnaire following a standardised protocol. These data were collected in school during a regular 40 minute class period. Based on the tested structural equation model, decision making and personal efficacy (that is, general competence) predicted higher refusal assertiveness and this greater assertiveness predicted less smoking at the two year follow up. The tested model had a good fit and was parsimonious and consistent with theory. Adolescent smoking prevention programmes often teach refusal skills in order to help youth resist peer pressure to smoke. The present findings suggest that teaching general competence skills as well may help to reduce smoking because youth with better personal efficacy and decision making skills are better able to implement smoking refusal strategies.

Towards a Practice Turn in EU Studies

DEFF Research Database (Denmark)

Adler-Nissen, Rebecca

2016-01-01

This article explores how practice theory can be recruited for the study of European integration. New generations of EU researchers are fascinated by the prospect of leaving the armchair and studying the people and artefacts that make the EU on an everyday level. This article surveys key practice......-oriented, anthropological and micro-sociological studies of the EU and European integration and shows how their findings challenge more traditional understandings of the dynamics of European integration. Moving beyond a stock-taking, the article distinguishes between ‘order- ing’ and ‘disordering’ practices and explores...... the potential of a practice turn in EU studies for both theory (overcoming dualism, replacing substantialism with processualism and rethinking power) and methods (including unstructured interviews, fieldwork and participant observation). A practice turn will force us to rethink core assumptions about the EU...

Anticipated Guilt for not Helping and Anticipated Warm Glow for Helping are Differently Impacted by Personal Responsibility to Help

Directory of Open Access Journals (Sweden)

Arvid Erlandsson

2016-09-01

Full Text Available One important motivation for people behaving prosocially is that they want to avoid negative and obtain positive emotions. In the prosocial behavior literature however, the motivations to avoid negative emotions (e.g. guilt and to approach positive emotions (e.g. warm glow are rarely separated, and sometimes even aggregated into a single mood-management construct. The aim of this study was to investigate whether anticipated guilt if not helping and anticipated warm glow if helping are influenced similarly or differently when varying situational factors related to personal responsibility to help. Helping scenarios were created and pilot tests established that each helping scenario could be formulated both in a high-responsibility version and in a low-responsibility version. In Study 1 participants read high-responsibility and low-responsibility helping scenarios, and rated either their anticipated guilt if not helping or their anticipated warm glow if helping (i.e. separate evaluation. Study 2 was similar but here participants rated both their anticipated guilt if not helping and their anticipated warm glow if helping (i.e. joint evaluation. Anticipated guilt was clearly higher in the high-responsibility versions, but anticipated warm glow was unaffected (in Studies 1a and 1b, or even higher in the low-responsibility versions (Study 2. In Studies 3 (where anticipated guilt and warm glow were evaluated separately and 4 (where they were evaluated jointly, personal responsibility to help was manipulated within-subjects. Anticipated guilt was again constantly higher in the high-responsibility versions but for many types of responsibility-manipulations, anticipated warm glow was higher in the low-responsibility versions. The results suggest that we anticipate guilt if not fulfilling our responsibility but that we anticipate warm glow primarily when doing over and beyond our responsibility. We argue that future studies investigating motivations for

Anticipated Guilt for Not Helping and Anticipated Warm Glow for Helping Are Differently Impacted by Personal Responsibility to Help

Science.gov (United States)

Erlandsson, Arvid; Jungstrand, Amanda Å.; Västfjäll, Daniel

2016-01-01

One important motivation for people behaving prosocially is that they want to avoid negative and obtain positive emotions. In the prosocial behavior literature however, the motivations to avoid negative emotions (e.g., guilt) and to approach positive emotions (e.g., warm glow) are rarely separated, and sometimes even aggregated into a single mood-management construct. The aim of this study was to investigate whether anticipated guilt if not helping and anticipated warm glow if helping are influenced similarly or differently when varying situational factors related to personal responsibility to help. Helping scenarios were created and pilot tests established that each helping scenario could be formulated both in a high-responsibility version and in a low-responsibility version. In Study 1 participants read high-responsibility and low-responsibility helping scenarios, and rated either their anticipated guilt if not helping or their anticipated warm glow if helping (i.e., separate evaluation). Study 2 was similar but here participants rated both their anticipated guilt if not helping and their anticipated warm glow if helping (i.e., joint evaluation). Anticipated guilt was clearly higher in the high-responsibility versions, but anticipated warm glow was unaffected (in Studies 1a and 1b), or even higher in the low-responsibility versions (Study 2). In Studies 3 (where anticipated guilt and warm glow were evaluated separately) and 4 (where they were evaluated jointly), personal responsibility to help was manipulated within-subjects. Anticipated guilt was again constantly higher in the high-responsibility versions but for many types of responsibility-manipulations, anticipated warm glow was higher in the low-responsibility versions. The results suggest that we anticipate guilt if not fulfilling our responsibility but that we anticipate warm glow primarily when doing over and beyond our responsibility. We argue that future studies investigating motivations for helping

Perceptions of Help Given to Healthy Older Mothers by Adult Daughters: Ways of Initiating Help and Types of Help Given

Science.gov (United States)

Martini, Tanya S.; Grusec, Joan E.; Bernardini, Silvia Cortese

2003-01-01

Older mother-adult daughter dyads (N = 43) addressed two issues pertaining to the ways in which help is initiated (offered, requested, and imposed help) and type of help given (instrumental help, advice, and emotional support) a) mothers' reasoning about these aspects of help, and b) daughters' understanding of mothers' feelings. Both groups noted…

Diamond turning of thermoplastic polymers

Energy Technology Data Exchange (ETDEWEB)

Smith, E.; Scattergood, R.O.

1988-12-01

Single point diamond turning studies were made using a series of thermoplastic polymers with different glass transition temperatures. Variations in surface morphology and surface roughness were observed as a function of cutting speed. Lower glass transition temperatures facilitate smoother surface cuts and better surface finish. This can be attributed to the frictional heating that occurs during machining. Because of the very low glass transition temperatures in polymeric compared to inorganic glasses, the precision machining response can be very speed sensitive.

Effect of surface integrity of hard turned AISI 52100 steel on fatigue performance

International Nuclear Information System (INIS)

Smith, Stephen; Melkote, Shreyes N.; Lara-Curzio, Edgar; Watkins, Thomas R.; Allard, Larry; Riester, Laura

2007-01-01

This paper addresses the relationship between surface integrity and fatigue life of hard turned AISI 52100 steel (60-62 HRC), with grinding as a benchmark. The impact of superfinishing on the fatigue performance of hard turned and ground surfaces is also discussed. Specifically, the surface integrity and fatigue life of the following five distinct surface conditions are examined: hard turned with continuous white layer, hard turned with no white layer, ground, and superfinished hard turned and ground specimens. Surface integrity of the specimens is characterized via surface topography measurement, metallography, residual stress measurements, transmission electron microscopy (TEM), and nano-indentation tests. High cycle tension-tension fatigue tests show that the presence of white layer does not adversely affect fatigue life and that, on average, the hard turned surface performs as well or better than the ground surface. The effect of superfinishing is to exaggerate these differences in performance. The results obtained from this study suggest that the effect of residual stress on fatigue life is more significant than the effect of white layer. For the hard turned surfaces, the fatigue life is found to be directly proportional to both the surface compressive residual stress and the maximum compressive residual stress. Possible explanations for the observed effects are discussed

Help-seeking preferences in the area of mild cognitive impairment: comparing family physicians and the lay public.

Science.gov (United States)

Werner, Perla; Heinik, Jeremia; Giveon, Shmuel; Segel-Karpas, Dikla; Kitai, Eliezer

2014-01-01

Mild cognitive impairment (MCI) or mild neurocognitive disorder is a well-established clinical entity included in current diagnostic guidelines for Alzheimer's disease and in major psychiatric classifications. In all, a loosely defined concern obtained from conceptually different sources (the individual, a knowledgeable informant, or a clinician) regarding a decline in cognition and change in functioning constitutes a sine qua non for initiating diagnostics and providing therapy and support. This concern in practice may translate into complex proactive help-seeking behavior. A better understanding of help-seeking preferences is required in order to promote early detection and management. To compare help-seeking preferences of family physicians and the lay public in the area of MCI. A structured questionnaire was used to collect data from 197 family physicians (self-administered) and 517 persons aged 45 and over from the lay public (face to face). Information regarding familiarity with MCI and help-seeking preferences was assessed. The vast majority in both samples reported that family physician, spouse, and children are the most highly recommended sources of help-seeking. In regard to professional sources of help-seeking, a higher percentage of the physicians than the lay public sample consistently recommended seeking help from nurses and social workers and psychiatrists, but a higher percentage of the lay public recommended turning to a neurologist for help. There were both similarities and differences between family physicians and the lay public in their preferences regarding help-seeking for a person with MCI. Most prominent is the physicians' greater tendency to recommend professional sources of help-seeking. Understanding of help-seeking preferences of both physicians and lay persons might help overcome barriers for establishing diagnosis, receiving care, and improving communication between doctors and patients.

Surface Corrosion Resistance in Turning of Titanium Alloy

Directory of Open Access Journals (Sweden)

Rui Zhang

2015-01-01

Full Text Available This work addresses the issues associated with implant surface modification. We propose a method to form the oxide film on implant surfaces by dry turning to generate heat and injecting oxygen-rich gas at the turning-tool flank. The morphology, roughness, composition, and thickness of the oxide films in an oxygen-rich atmosphere were characterized using scanning electron microscopy, optical profiling, and Auger electron spectroscopy. Electrochemical methods were used to study the corrosion resistance of the modified surfaces. The corrosion resistance trends, analyzed relative to the oxide film thickness, indicate that the oxide film thickness is the major factor affecting the corrosion resistance of titanium alloys in a simulated body fluid (SBF. Turning in an oxygen-rich atmosphere can form a thick oxide film on the implant surface. The thickness of surface oxide films processed at an oxygen concentration of 80% was improved to 4.6 times that of films processed at an oxygen concentration of 21%; the free corrosion potential shifted positively by 0.357 V, which significantly improved the corrosion resistance of titanium alloys in the SBF. Therefore, the proposed method may (partially replace the subsequent surface oxidation. This method is significant for biomedical development because it shortens the process flow, improves the efficiency, and lowers the cost.

When attempts at robbing prey turn fatal

Science.gov (United States)

Dejean, Alain; Corbara, Bruno; Azémar, Frédéric; Carpenter, James M.

2012-07-01

Because group-hunting arboreal ants spread-eagle insect prey for a long time before retrieving them, these prey can be coveted by predatory flying insects. Yet, attempting to rob these prey is risky if the ant species is also an effective predator. Here, we show that trying to rob prey from Azteca andreae workers is a fatal error as 268 out of 276 potential cleptobionts (97.1 %) were captured in turn. The ant workers hunt in a group and use the "Velcro®" principle to cling firmly to the leaves of their host tree, permitting them to capture very large prey. Exceptions were one social wasp, plus some Trigona spp. workers and flies that landed directly on the prey and were able to take off immediately when attacked. We conclude that in this situation, previously captured prey attract potential cleptobionts that are captured in turn in most of the cases.

Social conformity and propagation of information in collective U-turns of fish schools.

Science.gov (United States)

Lecheval, Valentin; Jiang, Li; Tichit, Pierre; Sire, Clément; Hemelrijk, Charlotte K; Theraulaz, Guy

2018-04-25

Moving animal groups such as schools of fishes or flocks of birds often undergo sudden collective changes of their travelling direction as a consequence of stochastic fluctuations in heading of the individuals. However, the mechanisms by which these behavioural fluctuations arise at the individual level and propagate within a group are still unclear. In this study, we combine an experimental and theoretical approach to investigate spontaneous collective U-turns in groups of rummy-nose tetra ( Hemigrammus rhodostomus ) swimming in a ring-shaped tank. U-turns imply that fish switch their heading between the clockwise and anticlockwise direction. We reconstruct trajectories of individuals moving alone and in groups of different sizes. We show that the group decreases its swimming speed before a collective U-turn. This is in agreement with previous theoretical predictions showing that speed decrease facilitates an amplification of fluctuations in heading in the group, which can trigger U-turns. These collective U-turns are mostly initiated by individuals at the front of the group. Once an individual has initiated a U-turn, the new direction propagates through the group from front to back without amplification or dampening, resembling the dynamics of falling dominoes. The mean time between collective U-turns sharply increases as the size of the group increases. We develop an Ising spin model integrating anisotropic and asymmetrical interactions between fish and their tendency to follow the majority of their neighbours nonlinearly (social conformity). The model quantitatively reproduces key features of the dynamics and the frequency of collective U-turns observed in experiments. © 2018 The Author(s).

3D characterisation of tool wear whilst diamond turning silicon

OpenAIRE

Durazo-Cardenas, Isidro Sergio; Shore, Paul; Luo, X.; Jacklin, T.; Impey, S. A.; Cox, A.

2006-01-01

Nanometrically smooth infrared silicon optics can be manufactured by the diamond turning process. Due to its relatively low density, silicon is an ideal optical material for weight sensitive infrared (IR) applications. However, rapid diamond tool edge degradation and the effect on the achieved surface have prevented significant exploitation. With the aim of developing a process model to optimise the diamond turning of silicon optics, a series of experimental trials were devi...

Interferometric evaluation of diamond-turned mirrors for CO2 laser fusion

International Nuclear Information System (INIS)

Munroe, J.L.

1979-01-01

It is shown that single-point diamond-turned optics exhibit different characteristics than conventionally manufactured optics and the type of information required by the machinist is quite different than the information that would be required by an optician. It was also seen, with Antares being a good example, that single-point diamond turning allows the manufacture of geometries and scales that might be unthinkable if conventional manufacturing were to be used. As single-point diamond turning continues to improve in quality, machined optics will find application at shorter and shorter wavelengths. A whole new formalism to describe manufacturing errors in terms meaningful to the machinist will have to be developed

Efficiency analysis of the speed turns in the crawl stroke swimming.

Directory of Open Access Journals (Sweden)

Savchenko M.I.

2011-02-01

Full Text Available Contemporary approaches to improving technique of the speed in the crawl stroke swimming, namely roll-forward turn were considered in the paper. The performance efficiency is defined by the time covering 15 meter distance. The students of the sports mastering group aged 16-20 took part in the experiment. The video recordings of the Ukrainian, European and World Championships and Deflympic Games, and also chronometration during the department trainings served as the experimental data. The research showed that white improving the technical level of turns performance, the attention should be paid to the exact performance of all the elements of the turns.

The Lewisian turning point and international migration: the case of Japan.

Science.gov (United States)

Watanabe, S

1994-01-01

"This article critically examines the Lewisian turning point [concerning the availability of unlimited manpower resources] in light of Japan's experience since the mid-1800s. Japan reached its Lewisian turning point around 1960. Contrary to the assumptions of the theory however, the findings for Japan indicate that political factors have been more determinative of the rate of migration than purely economic ones. Prior to its turning point in 1960, international relations, war and forced repatriation were the decisive factors. Recently, though the inflow of foreign workers to fill labor shortages has increased, so also has the outflow of Japanese to accompany direct foreign investment." excerpt

grid will help physicists' global hunt for particles Researchers have begun running experiments with the MidWest Tier 2 Center, one of five regional computing centers in the US.

CERN Multimedia

Ames, Ben

2006-01-01

"When physicists at Switzerland's CERN laboratory turn on their newsest particle collider in 2007, they will rely on computer scientists in Chicago and Indianapolis to help sift through the results using a worldwide supercomputing grid." (1/2 page)

Strategy in Generative Planning of Turning Processes

NARCIS (Netherlands)

van Houten, Frederikus J.A.M.; Kals, H.J.J.

1986-01-01

This paper reports on the process and operations planning system ROUND and the strategies which underlie the decision making processes in the planning of turning operations. At first, an outline is given about the environment for which generative systems like ROUND are being developed. The

Turning theory into practice: the development of modern transdermal drug delivery systems and future trends.

Science.gov (United States)

Perumal, O; Murthy, S N; Kalia, Y N

2013-01-01

Despite its remarkable barrier function, the skin remains an attractive site for systemic drug delivery given its easy accessibility, large surface area and the possibility to bypass the gastrointestinal tract and the liver and so modify drug absorption kinetics. The pioneering work of Scheuplein, Higuchi and others in the 1960s helped to explain the processes involved in passive percutaneous absorption and led to the development of mathematical models to describe transdermal drug delivery. The intervening years have seen these theories turned to practice and a significant number of transdermal systems are now available including some that employ active drug delivery. This review briefly discusses the evolution of transdermal therapeutic systems over the years and the potential of newer transdermal technologies to deliver hydrophilic drugs and macromolecules through the skin. © 2013 S. Karger AG, Basel.

Help with Hives

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Help With Hives KidsHealth / For Kids / Help With Hives What's in this article? What Are ... about what happened. The doctor can try to help figure out what might be causing your hives, ...

Negotiating behavioural change: therapists' proposal turns in Cognitive Behavioural Therapy.

Science.gov (United States)

Ekberg, Katie; Lecouteur, Amanda

2012-01-01

Cognitive behavioural therapy (CBT) is an internationally recognised method for treating depression. However, many of the techniques involved in CBT are accomplished within the therapy interaction in diverse ways, and with varying consequences for the trajectory of therapy session. This paper uses conversation analysis to examine some standard ways in which therapists propose suggestions for behavioural change to clients attending CBT sessions for depression in Australia. Therapists' proposal turns displayed their subordinate epistemic authority over the matter at hand, and emphasised a high degree of optionality on behalf of the client in accepting their suggestions. This practice was routinely accomplished via three standard proposal turns: (1) hedged recommendations; (2) interrogatives; and (3) information-giving. These proposal turns will be examined in relation to the negotiation of behavioural change, and the implications for CBT interactions between therapist and client will be discussed.

Bodies with noncircular cross sections and bank-to-turn missiles

Science.gov (United States)

Jackson, C. M., Jr.; Sawyer, W. C.

1992-01-01

A development status evaluation is presented for the aerodynamics of missile configurations with noncircular cross-sections and bank-to-turn maneuvering systems, giving attention to cases with elliptical and square cross-sections, as well as bodies with variable cross-sections. The assessment of bank-to-turn missile performance notes inherent stability/control problems. A summary and index are provided for aerodynamic data on monoplanar configurations, including those which incorporate airbreathing propulsion systems.

Learning, Teaching, and Turn Taking in the Repeated Assignment Game

OpenAIRE

Timothy N. Cason; Sau-Him Paul Lau; Vai-Lam Mui

2011-01-01

History-dependent strategies are often used to support cooperation in repeated game models. Using the indefinitely repeated common-pool resource assignment game and a perfect stranger experimental design, this paper reports novel evidence that players who have successfully used an efficiency-enhancing turn-taking strategy will teach other players in subsequent supergames to adopt this strategy. We find that subjects engage in turn taking frequently in both the Low Conflict and the High Confli...

Effect of transmitter turn-off time on transient soundings

Science.gov (United States)

Fitterman, D.V.; Anderson, W.L.

1987-01-01

A general procedure for computing the effect of non-zero turn-off time on the transient electromagnetic response is presented which can be applied to forward and inverse calculation methods for any transmitter-receiver configuration. We consider in detail the case of a large transmitter loop which has a receiver coil located at the center of the loop (central induction or in-loop array). For a linear turn-off ramp of width t0, the voltage response is shown to be the voltage due to an ideal step turn-off averaged over windows of width t0. Thus the effect is similar to that obtained by using averaging windows in the receiver. In general when time zero is taken to be the end of the ramp, the apparent resistivity increases for a homogeneous half-space over a limited time range. For time zero taken to be the start of the ramp the apparent resistivity is affected in the opposite direction. The effect of the ramp increases with increasing t0 and first-layer resistivity, is largest during the intermediate stage, and decreases with increasing time. It is shown that for a ramp turn-off, there is no effect in the early and late stages. For two-layered models with a resistive first layer (??1>??2), the apparent resistivity is increased in the intermediate stage. When the first layer is more conductive than the second layer (??1interpretation as shown by field examples; the influence is the greatest on near-surface layer parameters. ?? 1987.

Composting of tobacco plant waste by manual turning and forced aeration system

OpenAIRE

Nonglak Saithep

2009-01-01

The efficiency of tobacco plant waste composting, by the manual turning and the forced aeration system, was compared. Tobacco plant waste, cow manure, urea fertiliser, and a compost inoculum mixture at a 100:10:0.2:0.01 ratio respectively, with 60% (w/v) moisture content, were set up in piling forms. The piles of the manual turning system were provided with turning aeration by hand at intervals of 7 days during the composting process. For the forced aeration system, each pile was aerated by a...

Postcolonial turn : re-imagining anthropology and Africa

NARCIS (Netherlands)

Devisch, R.; Nyamnjoh, F.

2011-01-01

This book is a reflection on the mental decolonization of the postcolonialist turn in Africanist scholarship and is simultaneously a tribute to the late Professor Archibald Mafeje. A number of the articles, including the Introduction by A. Olukoshi and F. Nyamnjoh, are reprinted from the Codesria

La valorisation du végétal dans la trajectoire de mutation des friches urbaines : une approche socio-environnementale

OpenAIRE

Anquetil , Virginie

2016-01-01

Urban brownfields and other derelict lands are resources for cities development and densification. Some of them may be colonized by spontaneous vegetation. Particular brownfield redevelopment projects take advantage of this vegetation by preserving and integrating it into the master plan. Could the persistence of this vegetation be the key to understand the socio-spatial and environmental functioning of newly-created public spaces? We carried out a comprehensive evaluation of three revevelopm...

Abolishment of Spontaneous Flight Turns in Visually Responsive Drosophila.

Science.gov (United States)

Ferris, Bennett Drew; Green, Jonathan; Maimon, Gaby

2018-01-22

Animals react rapidly to external stimuli, such as an approaching predator, but in other circumstances, they seem to act spontaneously, without any obvious external trigger. How do the neural processes mediating the execution of reflexive and spontaneous actions differ? We studied this question in tethered, flying Drosophila. We found that silencing a large but genetically defined set of non-motor neurons virtually eliminates spontaneous flight turns while preserving the tethered flies' ability to perform two types of visually evoked turns, demonstrating that, at least in flies, these two modes of action are almost completely dissociable. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of magneto rheological damper on tool vibration during hard turning

Science.gov (United States)

Paul, P. Sam; Varadarajan, A. S.

2012-12-01

Recently, the concept of hard turning has gained considerable attention in metal cutting as it can apparently replace the traditional process cycle of turning, heat treating, and finish grinding for assembly of hard wear resistant steel parts. The present investigation aims at developing a magneto rheological (MR) fluid damper for suppressing tool vibration and promoting better cutting performance during hard turning. The magneto rheological Fluid acts as a viscoelastic spring with non-linear vibration characteristics that are controlled by the composition of the magneto rheological fluid, the shape of the plunger and the electric parameters of the magnetizing field. Cutting experiments were conducted to arrive at a set of electrical, compositional and shape parameters that can suppress tool vibration and promote better cutting performance during turning of AISI 4340 steel of 46 HRC with minimal fluid application using hard metal insert with sculptured rake face. It was observed that the use of MR fluid damper reduces tool vibration and improves the cutting performance effectively. Also commercialization of this idea holds promise to the metal cutting industry.

Mass enhances speed but diminishes turn capacity in terrestrial pursuit predators

Science.gov (United States)

Wilson, Rory P; Griffiths, Iwan W; Mills, Michael GL; Carbone, Chris; Wilson, John W; Scantlebury, David M

2015-01-01

The dynamics of predator-prey pursuit appears complex, making the development of a framework explaining predator and prey strategies problematic. We develop a model for terrestrial, cursorial predators to examine how animal mass modulates predator and prey trajectories and affects best strategies for both parties. We incorporated the maximum speed-mass relationship with an explanation of why larger animals should have greater turn radii; the forces needed to turn scale linearly with mass whereas the maximum forces an animal can exert scale to a 2/3 power law. This clarifies why in a meta-analysis, we found a preponderance of predator/prey mass ratios that minimized the turn radii of predators compared to their prey. It also explained why acceleration data from wild cheetahs pursuing different prey showed different cornering behaviour with prey type. The outcome of predator prey pursuits thus depends critically on mass effects and the ability of animals to time turns precisely. DOI: http://dx.doi.org/10.7554/eLife.06487.001 PMID:26252515

Composting of tobacco plant waste by manual turning and forced aeration system

Directory of Open Access Journals (Sweden)

Nonglak Saithep

2009-05-01

Full Text Available The efficiency of tobacco plant waste composting, by the manual turning and the forced aeration system, was compared. Tobacco plant waste, cow manure, urea fertiliser, and a compost inoculum mixture at a 100:10:0.2:0.01 ratio respectively, with 60% (w/v moisture content, were set up in piling forms. The piles of the manual turning system were provided with turning aeration by hand at intervals of 7 days during the composting process. For the forced aeration system, each pile was aerated by a 3-HP air pump with a flow rate of 19 litres min-1 for 15 minutes every morning and evening. The completely randomised design of turned and force-aerated piles was performed in triplicate. The composting activity of both systems during the composting period was measured by several parameters: temperature, pH, moisture content, C/N ratio, growth of microorganisms, cellulase activity, and nicotine degradation in the set-up piles. Both systems had similar temperature, pH, and moisture content conditions in the piles during the composting process. However, the forced aeration system was more advantageous for the growth of mesophilic and thermophilic microorganisms, for cellulase activity from cellulase-producing microorganisms, and for nicotine degradation, when compared to the manual turning system. In conclusion, the forced aeration system was more efficient than the manual turning system in composting and is a viable alternative method for the composting process.

Experimentation and Prediction of Temperature Rise in Turning ...

African Journals Online (AJOL)

Experimentation and Prediction of Temperature Rise in Turning Process using Response Surface Methodology. ... Science, Technology and Arts Research Journal. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue ...

A helping hand

NARCIS (Netherlands)

Mirjam de Klerk; Alice de Boer; Sjoerd Kooiker; Inger Plaisier; Peggy Schyns

2014-01-01

Original title: Hulp geboden   The help provided to people with a care need is about to undergo major changes in the Netherlands. People who need help will be expected to rely more on help from members of their network. What are the opportunities for informal carers and volunteers, and where

Spontaneous perseverative turning in rats with radiation-induced hippocampal damage

International Nuclear Information System (INIS)

Mickley, G.A.; Ferguson, J.L.; Nemeth, T.J.; Mulvihill, M.A.; Alderks, C.E.

1989-01-01

This study found a new behavioral correlate of lesions specific to the dentate granule cell layer of the hippocampus: spontaneous perseverative turning. Irradiation of a portion of the neonatal rat cerebral hemispheres produced hypoplasia of the granule cell layer of the hippocampal dentate gyrus while sparing the rest of the brain. Radiation-induced damage to the hippocampal formation caused rats placed in bowls to spontaneously turn in long, slow bouts without reversals. Irradiated subjects also exhibited other behaviors characteristic of hippocampal damage (e.g., perseveration in spontaneous exploration of the arms of a T-maze, retarded acquisition of a passive avoidance task, and increased horizontal locomotion). These data extend previously reported behavioral correlates of fascia dentata lesions and suggest the usefulness of a bout analysis of spontaneous bowl turning as a measure of nondiscrete-trial spontaneous alternation and a sensitive additional indicator of radiation-induced hippocampal damage

Travel Time Model for Right-Turning Vehicles of Secondary Street at Unsignalized Intersections

Directory of Open Access Journals (Sweden)

Feng Yu-Qin

2013-01-01

Full Text Available The travel time of right-turning vehicles on secondary street at unsignalized intersection is discussed in this paper. Under the assumption that the major-street through vehicles’ headway follows Erlang distribution and secondary-street right-turning vehicles’ headway follows Poisson distribution. The right-turning vehicles travel time model is established on the basis of gap theory and M/G/1 queue theory. Comparison is done with the common model based on the assumption that the major-street vehicles’ headway follows Poisson distribution. An intersection is selected to verify each model. The results show that the model established in this paper has stronger applicability, and its most relative error is less than 15%. In addition, the sensitivity analysis has been done. The results show that right-turning flow rate and major-street flow rate have a significant impact on the travel time. Hence, the methodology for travel time of right-turning vehicles at unsignalized intersection proposed in this paper is effective and applicable.

Measuring of roundness after turning of composite material with natural fibers

Directory of Open Access Journals (Sweden)

D. Mital

2016-12-01

Full Text Available The article is based on practical requirements from the reason of unequally removed material during the turning of the wood plastic composite (WPC. This results in geometrical deviations of the WPC bar diameter. WPC represents a relatively new group of materials that has been at the market for almost 30 years. In 1983 Lear Corporation in Wisconsine, USA made for the first time the interior panels of cars from composite materials – PP matrix with organic filler – 50 % wood flour. WPCs displace traditional materials such as wood, steel and cement materials in the marina industry. Designers are not limited technology of production from construction aspect, because different shapes and profiles can be produced by injection (resp. process of extrusion, but in the process of machining were monitored problems with tolerances. Mixed colors can be achieved by using of different pigments and one feels that this is real wood. Technologists begin to use convention technologies – drilling, milling and turning, as tendency of application of WPC increased. Knowledges about machining of WPC are not elaborate as deep as machining of metals or plastics. And this is a reason for orientation in this direction too. Commercial wood plastic composite MEGAWOOD (70 % wood flour, 30 % HDPE was a sample material in current investigation of roundness after turning of WPC. HSS EN ISO HS6-5-2 cutting tool was used. The geometry of the cutting tool was γ0 = 20°, α0 = 8°, κr = 45°, rε = 0,5 mm, εr = 90°. Cutting conditions during turning were as follows: cutting speed n = 900 m/min (constant, feed f = 0,1 to 0,61 mm, depth of cut ap = 0,5 mm for turning of final diameter d = 36 mm. It was dry turning. Roundness/cylindricity measuring system RA – 120 was used for measuring of roundness deviation. It was found that the roundness deviation increases with feed increasing. Popped heat was not used during the turning to final diameter – 36 mm. Using of popped heat

Turn-key SRF accelerators to drive subcritical reactors

International Nuclear Information System (INIS)

Johnson, Rolland P.

2011-01-01

Large particle accelerator projects, both accomplished and proposed, have been used to engage US industry through contracts and grants to develop efficient capabilities to design, develop, produce, and deliver entire accelerator systems or any needed subsystems. Staffed in many cases by experienced scientists and engineers from National Laboratories and Universities, existing companies could extend their portfolios to offer turn-key accelerators with parameters to match the needs of ADS. If the reactors were based on molten salt fuel such that trip rate requirements were relaxed, the developments needed for a multi-MW proton accelerator for ADS would be minimal. Turn-key SRF proton linacs for ADS operation can be ordered now to enable GW-level power generation from natural thorium, natural uranium, or nuclear waste from conventional reactors. (author)

Erratum to: Courses of helping alliance in the treatment of people with severe mental illness in Europe

DEFF Research Database (Denmark)

Loos, Sabine; Arnold, Katrin; Slade, Mike

2015-01-01

with severe mental illness across Europe over a measurement period of one year. METHODS: Self-ratings of the HA by 588 people with severe mental illness who participated in a multicentre European study (CEDAR; ISRCTN75841675) were examined using latent class analysis. RESULTS: Four main patterns of alliance...... of life. CONCLUSIONS: Results support findings from psychotherapy research about a predominantly stable course of the helping alliance in patients with severe mental illness over time. Implications for research and practice indicate to turn the attention to subgroups with noticeable courses.......PURPOSE: The helping alliance (HA) between patient and therapist has been studied in detail in psychotherapy research, but less is known about the HA in long-term community mental health care. The aim of this study was to identify typical courses of the HA and their predictors in a sample of people...

Helping for Change

Science.gov (United States)

Neuringer, Allen; Oleson, Kathryn C.

2010-01-01

In "Helping for Change," Allen Neuringer and Kathryn Oleson describe another strategy that individuals can use to achieve their green goals. You might ask, "How can helping someone else help me change when I'm in the habit of not fulfilling my own promises?" The authors answer that question by explaining how the social reinforcement in a helping…

Development of a Low Cost MQL Setup for Turning Operations

OpenAIRE

Islam Sumaiya; Khandoker Noman; Izham Mohamad; Azizi Tengku; Debnath Sujan

2017-01-01

In this study, the effect of MQL application on the tool wear, surface roughness and chip formation in turning Aluminum alloy 6061 is investigated. Experiments were carried out by plain turning of an Aluminum bar with varying depth of cut, cutting speeds (spindle speed) and cutting environments (Dry, Wet and MQL). A newly designed, cost efficient and portable MQL setup was developed for this study. For each experimental trial, five passes were carried out in order to promote the formation of ...

Heading Estimation of Robot Combine Harvesters during Turning Maneuveres.

Science.gov (United States)

Rahman, Md Mostafizar; Ishii, Kazunobu

2018-05-01

Absolute heading is an important parameter for a robot combine harvester or a robot tracked combine harvester, especially while it is turning, but due to the rapid turning of robot combine harvesters, its inertial measurement unit gives a gyro measurement bias that causes heading drift. Our research goal is to estimate the absolute heading of robot combine harvesters by compensating this gyro measurement bias during non-linear turning maneuvers. A sensor fusion method like the extended Kalman filter combined with the tracked combine harvester dynamic model and sensor measurements was used to estimate the absolute heading of a robot combine harvester. Circular, sinusoidal and concave shapes were used to evaluate the estimated heading produced by the sensor fusion method. The results indicate that the estimated heading is better than measured heading which was calculated from the integration of yaw rate gyro measurements, and the root mean square errors (RMSEs) for estimated headings are smaller than the measured headings. In practics, the target of this paper is thus the estimation of a heading or absolute heading that is bias compensated, and can be further used to calculate the exact crop periphery for automatic path planning of robot combine harvesters.

Fuzzy Linguistic Optimization on Surface Roughness for CNC Turning

Directory of Open Access Journals (Sweden)

Tian-Syung Lan

2010-01-01

Full Text Available Surface roughness is often considered the main purpose in contemporary computer numerical controlled (CNC machining industry. Most existing optimization researches for CNC finish turning were either accomplished within certain manufacturing circumstances or achieved through numerous equipment operations. Therefore, a general deduction optimization scheme is deemed to be necessary for the industry. In this paper, the cutting depth, feed rate, speed, and tool nose runoff with low, medium, and high level are considered to optimize the surface roughness for finish turning based on L9(34 orthogonal array. Additionally, nine fuzzy control rules using triangle membership function with respective to five linguistic grades for surface roughness are constructed. Considering four input and twenty output intervals, the defuzzification using center of gravity is then completed. Thus, the optimum general fuzzy linguistic parameters can then be received. The confirmation experiment result showed that the surface roughness from the fuzzy linguistic optimization parameters is significantly advanced compared to that from the benchmark. This paper certainly proposes a general optimization scheme using orthogonal array fuzzy linguistic approach to the surface roughness for CNC turning with profound insight.

Spatial turn and animation practices inspired by cultural anthropology

Directory of Open Access Journals (Sweden)

Agnieszka Wieszaczewska

2016-09-01

Full Text Available Spatial turn is one of the cultural turns, which have recently occurred in the humanities. It stresses the importance of issues such as space and place and can be successfully used as a theoretical perspective gaining use in thought over issues such as globalisation, transnationality, mapping but also education. In the discourses of pedagogical science space and place are considered through their multidimensional impact on education and learning. As significant concepts rooting pedagogy or pedagogy of borderland. The pedagogical reflection on space could be also used in the field of animation practices, especially in activities, which are related to place somehow colonised.

Diamond-turning HP-21 beryllium to achieve an optical surface

International Nuclear Information System (INIS)

Allen, D.K.; Hauschildt, H.W.; Bryan, J.B.

1975-01-01

Investigation of diamond turning on beryllium was made in anticipation of obtaining an optical finish. Although results of past experiences were poor, it was decided to continue diamond turning on beryllium beyond initial failures. By changing speed and using coolant, partial success was achieved. Tool wear was the major problem. Tests were made to establish and plot wear as a function of cutting speed and time. Slower speeds did cause lower wear rates, but at no time did wear reach an acceptable level. The machine, tools, and procedure used were chosen based on the results of preliminary attempts and on previous experience. It was unnecessary to use an air-bearing spindle because tool failure governed the best finish that could be expected. All tools of diamond composition, whether single crystal or polycrystalline, wore at unacceptable rates. Based on present technology, it must be concluded that beryllium cannot be feasibly diamond turned to achieve an optical finish. (22 fig.)

Surface quality and topographic inspection of variable compliance part after precise turning

Science.gov (United States)

Nieslony, P.; Krolczyk, G. M.; Wojciechowski, S.; Chudy, R.; Zak, K.; Maruda, R. W.

2018-03-01

The paper presents the problem of precise turning of the mould parts with variable compliance and demonstrates a topographic inspection of the machined surface quality. The study was conducted for the cutting tools made of cemented carbide with coatings, in a range of variable cutting parameters. The long shaft with special axial hole, made of hardened 55NiCrMoV6 steel was selected as a workpiece. The carried out study included the stiffness measurement of the machining system, as well as the investigation of cutting force components. In this context, the surface topography parameters were evaluated using the stylus profile meter and analysed. The research revealed that the surface topography, alongside the 3D functional parameters, and PSD influences the performance of the machined surface. The lowest surface roughness parameters values, equalled to Sa = 1 μm and Sz = 4.3 μm have been obtained during turning with cutting speed vc = 90 m/min. The stable turning of variable compliance part affects the surface texture formation with a unidirectional perpendicular, anisotropic structure. Nevertheless, in case of unstable turning, the characteristic chatter marks are observed, and process dynamics has greater contribution in formation of surface finish than turning kinematics and elastic plastic deformation of workpiece.

Changes in inertia and effect on turning effort across different wheelchair configurations.

Science.gov (United States)

Caspall, Jayme J; Seligsohn, Erin; Dao, Phuc V; Sprigle, Stephen

2013-01-01

When executing turning maneuvers, manual wheelchair users must overcome the rotational inertia of the wheelchair system. Differences in wheelchair rotational inertia can result in increases in torque required to maneuver, resulting in greater propulsion effort and stress on the shoulder joints. The inertias of various configurations of an ultralightweight wheelchair were measured using a rotational inertia-measuring device. Adjustments in axle position, changes in wheel and tire type, and the addition of several accessories had various effects on rotational inertias. The configuration with the highest rotational inertia (solid tires, mag wheels with rearward axle) exceeded the configuration with the lowest (pneumatic tires, spoke wheels with forward axle) by 28%. The greater inertia requires increased torque to accelerate the wheelchair during turning. At a representative maximum acceleration, the reactive torque spanned the range of 11.7 to 15.0 N-m across the wheelchair configurations. At higher accelerations, these torques exceeded that required to overcome caster scrub during turning. These results indicate that a wheelchair's rotational inertia can significantly influence the torque required during turning and that this influence will affect active users who turn at higher speeds. Categorizing wheelchairs using both mass and rotational inertia would better represent differences in effort during wheelchair maneuvers.

Paying it forward: How helping others can reduce the psychological threat of receiving help

NARCIS (Netherlands)

Alvarez, K.; van Leeuwen, E.

2015-01-01

This paper shows that receiving help could be psychologically harmful for recipients, and passing on help to others after receiving help ("helping forward") is a good strategy to improve and restore help recipients' self-competence. Participants (N=87) received autonomy- or dependency-oriented help

Buoyancy frequency profiles and internal semidiurnal tide turning depths in the oceans

NARCIS (Netherlands)

King, B.; Stone, M.; Zhang, H.P.; Gerkema, T.; Marder, M.; Scott, R.B.; Swinney, H.L.

2012-01-01

We examine the possible existence of internal gravity wave "turning depths," depths below which the local buoyancy frequency N(z) becomes smaller than the wave frequency. At a turning depth, incident gravity waves reflect rather than reaching the ocean bottom as is generally assumed. Here we

Differences of Ballet Turns ("Pirouette") Performance between Experienced and Novice Ballet Dancers

Science.gov (United States)

Lin, Chia-Wei; Chen, Shing-Jye; Su, Fong-Chin; Wu, Hong-Wen; Lin, Cheng-Feng

2014-01-01

Purpose: This study investigated the different postural control strategies exhibited by experienced and novice dancers in ballet turns ("pirouettes"). Method: Thirteen novice and 13 experienced dancers performed ballet turns with dominant-leg support. The peak push force was measured in the double-leg support phase. The inclination…

Quench analysis of pancake wound REBCO coils with low resistance between turns

International Nuclear Information System (INIS)

Markiewicz, W Denis; Jaroszynski, Jan J; Abraimov, Dymtro V; Joyner, Rachel E; Khan, Amanatullah

2016-01-01

Quench in a pancake wound REBCO superconducting coil with low resistance (LR) between turns is examined by numerical analysis. In these calculations it is generally observed that once established, quench propagates rapidly in LR coils. Large transients are induced in the azimuthal solenoid current, allowed by the LR between turns, and become self-propagating. The transition from an initial state characterized by thermal diffusion to the dynamic inductive state of quench propagation is observed. The analysis is applied to the inner coil of a 30 T magnet where the quench performance is studied as a function of the value of resistance between turns. Rapid propagation of quench is seen in calculations for resistance between turns significantly greater than the resistance reported for no-insulation coils. The influence on quench of both steel co-wind and the amount of copper in the conductor is examined through calculation of the maximum temperature and the quench propagation velocity. (paper)

The turning points of world history : financial and methodological interpretations

OpenAIRE

Kukliński, Antoni (ed.); Pawłowski, Krzysztof (ed.); Swianiewicz, Jan (ed.)

2012-01-01

Volumes VI and VII of the REUPUS Series “The Atlantic Community. The Titanic of the XXI Century?” and “The Turning Points of World History” can be seen as twin volumes trying to find new empirical observations, new methodological approaches and new value judgements to face the enigma of the XXI Century. Those volumes try to present some new interpretations of one of the greatest turning points of human history which is the essential feature of our times... Volume VII is the ...

Improving the safety of patient turning and repositioning tasks for caregivers.

Science.gov (United States)

Fragala, Guy; Fragala, Maren

2014-07-01

Current evidence demonstrates why turning and positioning patients in bed presents a serious occupational risk of musculoskeletal disorders for caregivers. Results of the laboratory study investigating a new method of turning and positioning patients in bed are presented. The study was designed to evaluate how this new method reduced the risk of occupational musculoskeletal disorders to caregivers and may improve outcomes for patients. Copyright 2014, SLACK Incorporated.

Leibniz, Lefebvre and the spatial turn in law

Directory of Open Access Journals (Sweden)

Isolde de Villiers

2016-11-01

Full Text Available This contribution takes as its point of departure the spatial turn in law and the notion of spatial justice. It traces the term ‘spatial justice’ as introduced through the Spatial Planning and Land Use Management Act and it looks at the underlying view of space that has influenced the spatial turn in law. It furthermore investigates the ways in which the spatial turn in law has been influenced by the thinking of Henri Lefebvre, who relies on a Leibnizian conception of space. Lastly the link between Leibniz and legal positivism is considered in order to reach the final conclusion in the form of a caution against merely adding the language of spatial justice to an approach to space that remains caught up in abstract space. This will only further entrench existing fault lines in society. For this conclusion the work of Roger Berkowitz is central. Berkowitz argues convincingly that the work of Leibniz was central in the development of legal positivism, despite Leibniz in general being considered as a natural law thinker. The same applies to spatial justice theory, where the work of Leibniz is central: it may present the possibilities of another law – the law as it ought to be. The law conceptualised as ‘ought’ instead of ‘is’ would promote reconciliation. Alternatively, spatial justice can simply present the law as it ‘is’ and reconfirm and deepen the chasms in our world.

Helping Your Child through Early Adolescence -- Helping Your Child Series

Science.gov (United States)

... Bibliography Acknowledgements Tips to Help Your Child through Early Adolescence No Child Left Behind Printable ... Information About... Transforming Teaching Family and Community Engagement Early Learning Helping Your Child Our mission is to promote student achievement and ...

Energy-Based Analysis of Ultrasonically Assisted Turning

Directory of Open Access Journals (Sweden)

G.A. Volkov

2011-01-01

Full Text Available The process of ultrasonically-assisted turning (UAT is a superposition of vibration of a cutting tool on its standard movement in conventional turning (CT. The former technique has several advantages compared with the latter, one of the main being a significant decrease in the level of cutting forces. In this paper the effects observed in UAT are analysed employing ideas of dynamic fracture mechanics. The active stage of loading duration depends heavily on ultrasonic frequency and the cutting speed; he application of the fracture criterion based on the notion of incubation time makes it possible to calculate a dependence of this duration on its threshold amplitude. An estimation of energy, necessary to create a threshold pulse in the material, is made by solving the contact Hertz problem. The obtained time dependence of energy has a marked minimum. Thus, the existence of energy-efficient loading duration is demonstrated. This explains the decrease in the cutting force resulting from superimposed ultrasonic vibration. The obtained results are in agreement with experiments on ultrasonic assisted machining of aluminium and Inconel 718 alloy.

Ductile-regime turning of germanium and silicon

Science.gov (United States)

Blake, Peter N.; Scattergood, Ronald O.

1989-01-01

Single-point diamond turning of silicon and germanium was investigated in order to clarify the role of cutting depth in coaxing a ductile chip formation in normally brittle substances. Experiments based on the rapid withdrawal of the tool from the workpiece have shown that microfracture damage is a function of the effective depth of cut (as opposed to the nominal cutting depth). In essence, damage created by the leading edge of the tool is removed several revolutions later by lower sections of the tool edge, where the effective cutting depth is less. It appears that a truly ductile cutting response can be achieved only when the effective cutting depth, or critical chip thickness, is less than about 20 nm. Factors such as tool rake angle are significant in that they will affect the actual value of the critical chip thickness for transition from brittle to ductile response. It is concluded that the critical chip thickness is an excellent parameter for measuring the effects of machining conditions on the ductility of the cut and for designing tool-workpiece geometry in both turning and grinding.

Can attribution theory explain carers' propensity to help men with intellectual disabilities who display inappropriate sexual behaviour?

Science.gov (United States)

Willner, P; Smith, M

2008-01-01

This study examined the responses of care managers and direct care staff to vignettes of inappropriate sexual behaviour by a man with an intellectual disability. The aim was to test the theory that helping behaviour is determined by emotional responses (positive and negative emotional reactions, and optimism), which in turn are determined by causal attributions (respectively: controllability and stability of the incident depicted in the vignette). The vignettes varied in response topography and the age of the victim. Regression analysis was used to examine the relationships between causal attributions, emotional responses, and willingness to invest extra time and effort in the service user's care. No support was found for the pathway: low controllability --> increased sympathy and/or decreased negative emotions --> increased helping. However, strong support was found for the pathway: low stability --> high optimism --> increased helping, particularly in direct care staff. High levels of sympathy were also associated with increased helping, the effect again being mediated by feelings of optimism. The data provide support for one (but not the other) strand of attribution theory as applied to inappropriate sexual behaviour. The discussion considers the discrepancy between the present data and the far less encouraging literature on attribution theory as applied to challenging behaviour.

A Turn-Projected State-Based Conflict Resolution Algorithm

Science.gov (United States)

Butler, Ricky W.; Lewis, Timothy A.

2013-01-01

State-based conflict detection and resolution (CD&R) algorithms detect conflicts and resolve them on the basis on current state information without the use of additional intent information from aircraft flight plans. Therefore, the prediction of the trajectory of aircraft is based solely upon the position and velocity vectors of the traffic aircraft. Most CD&R algorithms project the traffic state using only the current state vectors. However, the past state vectors can be used to make a better prediction of the future trajectory of the traffic aircraft. This paper explores the idea of using past state vectors to detect traffic turns and resolve conflicts caused by these turns using a non-linear projection of the traffic state. A new algorithm based on this idea is presented and validated using a fast-time simulator developed for this study.

Memory boosts turn taking in evolutionary dilemma games.

Science.gov (United States)

Wang, Tao; Chen, Zhigang; Yang, Lei; Zou, You; Luo, Juan

2015-05-01

Spontaneous turn taking phenomenon can be observed in many self-organized systems, and the mechanism is unclear. This paper tries to model it by evolutionary dilemma games with memory mechanism. Prisoner's dilemma, Snowdrift (including Leader and Hero) and Stag-hunt games are unified on an extended S-T plane. Agents play game with all the others and make decision by the last game histories. The experiments find that when agents remember last 2-step histories or more, a kind of cooperative turn taking (CAD) bursts at the area of Snowdrift game with restriction of S + T > 2R and S ≠ T, while the consistent strategy (DorC) gathers on the line of S + T > 2R and S = T. We also find that the system's fitness ratio greatly improved with 2-step memory. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Emotions and Social Sciences in 20th century: The Prequel of Affective Turn

OpenAIRE

Giazú Enciso Domínguez; Alí Lara

2014-01-01

The Affective Turn is an innovative movement that is transforming the production of knowledge based on the study of affect and emotion. To understand the current role of emotions, we proposed a 'prequel. Telling what happened with emotions within the social sciences before the Affective Turn, and before the twentieth century. In this work we explain the present from the past, we tell the story before The History, we pay a debt to a previous work: The Affective Turn. We articulate the prequel ...

Effect of turning frequency on co-composting pig manure and fungus residue.

Science.gov (United States)

Jiang-Ming, Zhou

2017-03-01

Composting of agricultural wastes not only can reduce environmental pollution caused by improper disposal, but also can recycle agricultural wastes and transform them into highly valuable products, such as fertilizers or soil conditioners, for agricultural applications. However, the composting process and final product are easily affected by the limited oxygen supply that results from insufficient aeration, especially in the center of a large-scale windrow. Hence, a pilot-scale experiment was conducted to investigate the effects of the turning frequency on the composting efficiency and compost quality of used pig manure and fungus residue. Physical and chemical characteristics were measured over the course of 63 days of composting. The data indicate that higher temperatures and more rapid moisture removal generally result from a turning treatment of once every 2-4 days than in fewer, or no, turning treatments. The total nitrogen, total phosphorus, and total potassium contents increased in all windrows as the organic matter content decreased, but both the increases and decrease were greater in windrows that were turned more frequently. The reduction of the organic matter mass by 53.7-66.0% for a turning of once every 2-8 days is significantly higher than that for the static windrow (39.1%). Although there is an increase in nitrogen mass loss with an increased turning frequency, lower nitrogen mass losses (12.7-25.7%) in all treatments were noted compared with previous studies. A final compost product with less moisture, less weight, higher nutrient content (N, P, and K), and greater stability was obtained in windrows with turning frequencies of once every 2-4 days, which is recommended when composting pig manure and fungus residue. Composting of agricultural wastes not only can reduce environmental pollution caused by improper disposal, but recycling of agricultural wastes transforms them into highly valuable products, such as fertilizers or soil conditioners, for

Transformation of an Industrial Brownfield into an Ecological Buffer for Michigan’s Only Ramsar Wetland of International Importance

Directory of Open Access Journals (Sweden)

Greg Norwood

2012-05-01

Full Text Available The Detroit River International Wildlife Refuge spans 77 km along the Detroit River and western Lake Erie, and is the only unit of the National Wildlife Refuge System that is international. A key unit of the refuge is the 166-ha Humbug Marsh that represents the last kilometer of natural shoreline on the U.S. mainland of the river and Michigan’s only “Wetland of International Importance” designated under the 1971 International Ramsar Convention. Adjacent to Humbug Marsh is an 18-ha former industrial manufacturing site (now called the Refuge Gateway that is being remediated and restored as an ecological buffer for Humbug Marsh and the future home of the refuge’s visitor center. Restoration and redevelopment activities have included: cleanup and capping of contaminated lands; daylighting a creek (i.e., deliberately exposing the flow of a creek that was historically placed underground in a culvert and constructing a retention pond and emergent wetland to treat storm water prior to discharge to the Detroit River; restoring coastal wetland, riparian buffer, and upland habitats; and constructing two roads, hiking/biking trails, and a kayak/canoe landing to offer wildlife-compatible public uses that allow visitors to experience this internationally-recognized natural resource. This project has been described as transformational for the region by restoring an industrial brownfield into high quality wildlife habitat that expands the ecological buffer of a Ramsar site. Specific restoration targets for the site include: achieving a net gain of 6.5 ha of wetlands in a river that has lost 97% of its coastal wetlands to development; restoring 10.1 ha of upland buffer habitat; treating invasive Phragmites along 4 km of shoreline; and treatment of invasive plant species in 20.2 ha of upland habitats in Humbug Marsh. Further, the Refuge Gateway is being restored as a model of environmental sustainability for nearly seven million

A survey report for the turning of biped locomotion robot

International Nuclear Information System (INIS)

Kato, Ichiro; Takanishi, Atsuo; Kume, Etsuo.

1992-12-01

A mechanical design study of biped locomotion robots is going on at JAERI within the scope of the Human Acts Simulation Program (HASP). The design study at JAERI is of an arbitrarily mobile robot for inspection of nuclear facilities. A survey has been performed for collecting useful information from already existing biped locomotion robots. This is a survey report for the turning of biped locomotion robot: the WL-10R designed and developed at Waseda University. This report includes the control method of turning, machine model and control system. (author)

Isochronous 180 degree turns for the SLC positron system

International Nuclear Information System (INIS)

Helm, R.H.; Clendenin, J.E.; Ecklund, S.D.; Kulikov, A.V.; Pitthan, R.

1991-05-01

The design of the compact, achromatic, second order isochronous 180 degrees turn for the SLC positron transport system will be described. Design criteria require an energy range of 200±20 MeV, energy acceptance of ±5%, transverse admittance of 25π mm-mr, and minimal lengthening of the 3 to 4 mm (rms) positron bunch. The devices had to fit within a maximum height or width of about 10 ft. Optics specifications and theoretical performance are presented and compared to experimental results based on streak camera measurements of bunch length immediately after the first isochronous turn (200 MeV) and positron beam energy spread after S-band acceleration to 1.15 GeV. 5 refs., 7 figs

Magnetostrictive actuator-based micropositioner and its application in turning

Science.gov (United States)

Kanizar, William L.; Liu, Dongming; Moon, Kee S.; Sutherland, John W.

1996-05-01

The surface finish of a turned part is primarily generated from process parameters such as feed, tool geometry, and cutting speed. A micropositioner system utilizing a magnetostrictive material, Terfenol-D, as a linear motor is presented as a means to actively control the process. The system has an actuator clamped in a flexor that is rigid in the feed and main cutting force directions, yet is flexible in the radial direction. Using control algorithms implemented on a digital computer, the system can provide a means to compensate for deleterious vibrations. The system has also been used to manipulate the tool position in the radial direction so that non-circular turning can be accomplished.

Measurements of diamond-turned copper mirrors at glancing incidence

International Nuclear Information System (INIS)

Kimura, W.D.; Saito, T.T.

1987-01-01

The results of glancing incidence absorptance measurements performed on diamond-turned copper mirrors are presented. A photoacoustic calorimetry technique is used in which the output from a low power, chopped cw Nd:YAG laser (1.06 μm) is incident upon the mirror at angles of incidence from 0 to 87 0 , for both s and p-polarizations. Measurements are obtained as a function of the diamond turning groove orientation with respect to the plane of incidence. Minimum absorptance, at high angles of incidence, is achieved with s-polarized light and with the grooves aligned parallel to the plane of incidence. The affects on the absorptance of a large scratch at glancing incidence are also described

Measurements of diamond turned copper mirrors at glancing incidence

International Nuclear Information System (INIS)

Kimura, W.D.; Saito, T.T.

1987-01-01

The results of glancing incidence absorptance measurements performed on diamond turned copper mirrors are presented. A photoacoustic calorimetry technique is used in which the output from a low power, chopped cw Nd:YAG laser (1.06 μm) is incident upon the mirror at angles of incidence from 0 to 87 0 , for both s and p-polarizations. Measurements are obtained as a function of the diamond turning groove orientation with respect to the plane of incidence. Minimum absorptance at high angles of incidence is achieved with s-polarized light and with the grooves aligned parallel to the plane of incidence. The effects on the absorptance of a large scratch at glancing incidence are also described

SEARCHING FOR CRITERIA IN EVALUATING THE MONOFIN SWIMMING TURN FROM THE PERSPECTIVE OF COACHING AND IMPROVING TECHNIQUE

Directory of Open Access Journals (Sweden)

Marek Rejman

2008-03-01

Full Text Available This study aims to analysise the selected kinematic parameters of the monofin swimming turn. The high complexity of performing turns is hindered by the large surface of the monofin, which disturbs control and sense of the body in water. A lack of objective data available on monofin swimming turns has resulted in field research connected with the specification of parameters needed for the evaluation of the technique. Therefore, turns observed in elite swimmers contain underlying conclusions for objective criteria, ensuring the highest level of coaching and the improving of turns in young swimmers. Six, high level, male swimmers participated in the study. The subject of the analysis was the fastest turn, from one out of three trial turns made after swimming a distance of 25 m. Images of the turns were collected from two cameras located under water in accordance with the procedures of the previous analyses of freestyle turns. The images were digitized and analysed by the SIMI®- Movement Analysis System. The interdependency of the total turn time and the remaining recorded parameters, constituted the basis for analysis of the kinematic parameters of five turn phases. The interdependency was measured using r- Pearson's correlation coefficients. The novel character of the subject covered in this study, forced interpretation of the results on the basis of turn analyses in freestyle swimming. The results allow for the creation of a diagram outlinig area of search for an effective and efficient monofin swimming turn mechanism. The activities performed from the moment of wall contact until the commencement of stroking seem to be crucial for turn improvement. A strong belief has resulted that, the correct monofin swimming turn, is more than just a simple consequence of the fastest performance of all its components. The most important criteria in evaluating the quality of the monofin swimming turn are: striving for the optimal extension of wall contact

Combating land degradation: the potential of soil reconversion

Science.gov (United States)

Tobias, Silvia; Conen, Franz; Duss, Adrian; Wenzel, Leonore; Buser, Christine; Alewell, Christine

2017-04-01

Land degradation is usually not seen as a major problem in industrialised countries, although continuous soil sealing for human settlements and infrastructure entails the loss of agricultural land, landscape fragmentation and the loss of natural habitats. In many European countries, land-take on greenfields is unbowed, while, at the same time, there is a considerable number of unused brownfields, like abandoned rail yards and industrial or military sites. In addition, many new by-pass roads have been constructed to take up the volume of traffic and unburden the towns and villages from traffic emissions, but the old roads are rarely downgraded or reconverted and risk being used as shortcuts. Today the sealed area exceeds the requirements of the current generation and contributes to degraded land with heavily disturbed soil-borne ecosystem services. Soil reconversion, i.e. replacing a sealed surface with soil to restore ecosystem services, could mitigate this unsustainable trend that restricts the options of future generations. This contribution discusses the potential and challenges of soil reconversion to reduce net soil loss. The expanses of brownfield area vary between countries, whereas the rate of new soil sealing is still high in most countries and soil reconversion should be considered more. Our research revealed that the current techniques enable successful restoration of agricultural soils and pioneer habitats on site. However, reconverting single small areas can hardly mitigate landscape fragmentation at a regional scale. The same principle prevails as for soil sealing, but in the inverse way: the benefit of soil reconversion may appear small for single cases, but in the sum soil reconversion might be effective. Today, many brownfield areas stay sealed because of economic and political reasons, or because the potential benefit from restoring ecosystem services at these brownfield sites is not known. We developed a mapping approach to assess the potential

Protected Turning Movements of Noncooperative Automated Vehicles: Geometrics, Trajectories, and Saturation Flow

Directory of Open Access Journals (Sweden)

Xiaobo Liu

2018-01-01

Full Text Available This study is the first to quantify throughput (saturation flow of noncooperative automated vehicles when performing turning maneuvers, which are critical bottlenecks in arterial road networks. We first develop a constrained optimization problem based on AVs’ kinematic behavior during a protected signal phase which considers both ABS-enabled and wheels-locked braking, as well as avoiding encroaching into oncoming traffic or past the edge-of-receiving-lane. We analyze noncooperative (“defensive” behavior, in keeping with the Assured Clear Distance Ahead legal standard to which human drivers are held and AVs will likely also be for the foreseeable future. We demonstrate that, under plausible behavioral parameters, AVs appear likely to have positive impacts on throughput of turning traffic streams at intersections, in the range of +0.2% (under the most conservative circumstances to +43% for a typical turning maneuver. We demonstrate that the primary mechanism of impact of turning radius is its effect on speed, which is likely to be constrained by passenger comfort. We show heterogeneous per-lane throughput in the case of “double turn lanes.” Finally, we demonstrate limited sensitivity to crash-risk criterion, with a 4% difference arising from a change from 1 in 10,000 to 1 in 100,000,000. The paper concludes with a brief discussion of policy implications and future research needs.

Heading Estimation of Robot Combine Harvesters during Turning Maneuveres

Directory of Open Access Journals (Sweden)

Md Mostafizar Rahman

2018-05-01

Full Text Available Absolute heading is an important parameter for a robot combine harvester or a robot tracked combine harvester, especially while it is turning, but due to the rapid turning of robot combine harvesters, its inertial measurement unit gives a gyro measurement bias that causes heading drift. Our research goal is to estimate the absolute heading of robot combine harvesters by compensating this gyro measurement bias during non-linear turning maneuvers. A sensor fusion method like the extended Kalman filter combined with the tracked combine harvester dynamic model and sensor measurements was used to estimate the absolute heading of a robot combine harvester. Circular, sinusoidal and concave shapes were used to evaluate the estimated heading produced by the sensor fusion method. The results indicate that the estimated heading is better than measured heading which was calculated from the integration of yaw rate gyro measurements, and the root mean square errors (RMSEs for estimated headings are smaller than the measured headings. In practics, the target of this paper is thus the estimation of a heading or absolute heading that is bias compensated, and can be further used to calculate the exact crop periphery for automatic path planning of robot combine harvesters.

Forest Service Turns to NREL for Help Fighting Fires More Sustainably |

Science.gov (United States)

to need power," said Mike Ferris, public information officer for the Forest Service. "We're going to need phones and some sort of internet connectivity." Ferris said he's worked in fire camps bring in a caterer and a shower unit," Ferris said. "Both of those are going to need power. If

CNC Turning Center Advanced Operations. Computer Numerical Control Operator/Programmer. 444-332.

Science.gov (United States)

Skowronski, Steven D.; Tatum, Kenneth

This student guide provides materials for a course designed to introduce the student to the operations and functions of a two-axis computer numerical control (CNC) turning center. The course consists of seven units. Unit 1 presents course expectations and syllabus, covers safety precautions, and describes the CNC turning center components, CNC…

Structure of a rare non-standard sequence k-turn bound by L7Ae protein

Science.gov (United States)

Huang, Lin; Lilley, David M.J.

2014-01-01

Kt-23 from Thelohania solenopsae is a rare RNA kink turn (k-turn) where an adenine replaces the normal guanine at the 2n position. L7Ae is a member of a strongly conserved family of proteins that bind a range of k-turn structures in the ribosome, box C/D and H/ACA small nucleolar RNAs and U4 small nuclear RNA. We have solved the crystal structure of T. solenopsae Kt-23 RNA bound to Archeoglobus fulgidus L7Ae protein at a resolution of 2.95 Å. The protein binds in the major groove displayed on the outer face of the k-turn, in a manner similar to complexes with standard k-turn structures. The k-turn adopts a standard N3 class conformation, with a single hydrogen bond from A2b N6 to A2n N3. This contrasts with the structure of the same sequence located in the SAM-I riboswitch, where it adopts an N1 structure, showing the inherent plasticity of k-turn structure. This potentially can affect any tertiary interactions in which the RNA participates. PMID:24482444

Right-­turn traffic volume adjustment in traffic signal warrant analysis : final report.

Science.gov (United States)

2016-05-06

This report was based on the research project, Right-Turn Traffic Volume Adjustment in Traffic Signal Warrants, sponsored by the Nevada Department of Transportation (NDOT) and SOLARIS. Right-turn traffic does not affect intersection performance in th...

Children's Recognition of Pride and Guilt as Consequences of Helping and Not Helping.

Science.gov (United States)

Shorr, David N.; McClelland, Stephen E.

1998-01-01

Investigated the relationship between young children's age and their recognition that helping or choosing not to help can cause feelings of pride or guilt. Found age differences in identifying helping-action or inaction as causes, but little support for the hypothesis that identification of guilt as a consequence of not helping would…

Emotions and Social Sciences in 20th century: The Prequel of Affective Turn

Directory of Open Access Journals (Sweden)

Giazú Enciso Domínguez

2014-02-01

Full Text Available The Affective Turn is an innovative movement that is transforming the production of knowledge based on the study of affect and emotion. To understand the current role of emotions, we proposed a 'prequel. Telling what happened with emotions within the social sciences before the Affective Turn, and before the twentieth century. In this work we explain the present from the past, we tell the story before The History, we pay a debt to a previous work: The Affective Turn. We articulate the prequel through seven approaches: Socialconstructionism, Discursive Social Psychology, Cultural Studies of Emotions, Emocionologies, Interpretative Sociology, Sociolinguistic of Emotions and Feminist Studies of emotions. We review the interests of each approach, their schools, their past, and give hints about not only the present but the future(s of the Affective Turn, in social science and academy as well.

Turning shopping habits of young consumers into green

NARCIS (Netherlands)

Bialkova, Svetlana; van 't Erve, Sanne; van Hoof, Joris Jasper; Pruyn, Adriaan T.H.; Bigné, Enrique

2014-01-01

Consumers have strong shopping habits, and although being aware of sustainable issues, they hardly do green shopping. Therefore, a challenging question is: how to break the old shopping habits and turn those into green? The current study addresses this question looking at barriers and potential

Asking for Help: A Relational Perspective on Help Seeking in the Workplace

Science.gov (United States)

van der Rijt, Janine; Van den Bossche, Piet; van de Wiel, Margje W. J.; De Maeyer, Sven; Gijselaers, Wim H.; Segers, Mien S. R.

2013-01-01

In the context of the complexity of today's organizations, help seeking behavior is considered as an important step to problem solving and learning in organizations. Yet, help seeking has received less attention in organizational literature. To increase the potential impact of help seeking on learning, it is essential to understand which…

Three-residue turns in alpha/beta-peptides and their application in the design of tertiary structures.

Science.gov (United States)

Sharma, Gangavaram V M; Nagendar, Pendem; Ramakrishna, Kallaganti V S; Chandramouli, Nagula; Choudhary, Madavi; Kunwar, Ajit C

2008-06-02

A new three-residue turn was serendipitously discovered in alpha/beta hybrid peptides derived from alternating C-linked carbo-beta-amino acids (beta-Caa) and L-Ala residues. The three-residue beta-alpha-beta turn at the C termini, nucleated by a helix at the N termini, resulted in helix-turn (HT) supersecondary structures in these peptides. The turn in the HT motif is stabilized by two H bonds-CO(i-2)-NH(i), with a seven-membered pseudoring (gamma turn) in the backward direction, and NH(i-2)-CO(i), with a 13-membered pseudoring in the forward direction (i being the last residue)--at the C termini. The study was extended to generalize the new three-residue turn (beta-alpha-beta) by using different alpha- and beta-amino acids. Furthermore, the HT motifs were efficiently converted, by an extension with helical oligomers at the C termini, into peptides with novel helix-turn-helix (HTH) tertiary structures. However, this resulted in the destabilization of the beta-alpha-beta turn with the concomitant nucleation of another three-residue turn, alpha-beta-beta, which is stabilized by 11- and 15-membered bifurcated H bonds. Extensive NMR spectroscopic studies were carried out to delineate the secondary and tertiary structures in these peptides, which are further supported by molecular dynamics (MD) investigations.

Predicting beta-turns in proteins using support vector machines with fractional polynomials.

Science.gov (United States)

Elbashir, Murtada; Wang, Jianxin; Wu, Fang-Xiang; Wang, Lusheng

2013-11-07

β-turns are secondary structure type that have essential role in molecular recognition, protein folding, and stability. They are found to be the most common type of non-repetitive structures since 25% of amino acids in protein structures are situated on them. Their prediction is considered to be one of the crucial problems in bioinformatics and molecular biology, which can provide valuable insights and inputs for the fold recognition and drug design. We propose an approach that combines support vector machines (SVMs) and logistic regression (LR) in a hybrid prediction method, which we call (H-SVM-LR) to predict β-turns in proteins. Fractional polynomials are used for LR modeling. We utilize position specific scoring matrices (PSSMs) and predicted secondary structure (PSS) as features. Our simulation studies show that H-SVM-LR achieves Qtotal of 82.87%, 82.84%, and 82.32% on the BT426, BT547, and BT823 datasets respectively. These values are the highest among other β-turns prediction methods that are based on PSSMs and secondary structure information. H-SVM-LR also achieves favorable performance in predicting β-turns as measured by the Matthew's correlation coefficient (MCC) on these datasets. Furthermore, H-SVM-LR shows good performance when considering shape strings as additional features. In this paper, we present a comprehensive approach for β-turns prediction. Experiments show that our proposed approach achieves better performance compared to other competing prediction methods.

Ants show a leftward turning bias when exploring unknown nest sites.

Science.gov (United States)

Hunt, Edmund R; O'Shea-Wheller, Thomas; Albery, Gregory F; Bridger, Tamsyn H; Gumn, Mike; Franks, Nigel R

2014-12-01

Behavioural lateralization in invertebrates is an important field of study because it may provide insights into the early origins of lateralization seen in a diversity of organisms. Here, we present evidence for a leftward turning bias in Temnothorax albipennis ants exploring nest cavities and in branching mazes, where the bias is initially obscured by thigmotaxis (wall-following) behaviour. Forward travel with a consistent turning bias in either direction is an effective nest exploration method, and a simple decision-making heuristic to employ when faced with multiple directional choices. Replication of the same bias at the colony level would also reduce individual predation risk through aggregation effects, and may lead to a faster attainment of a quorum threshold for nest migration. We suggest the turning bias may be the result of an evolutionary interplay between vision, exploration and migration factors, promoted by the ants' eusociality.

Advancing the deliberative turn in natural resource management: an analysis of discourses on the use of local resources.

Science.gov (United States)

Rodela, Romina

2012-04-15

The natural resource management literature stresses the need for public participation and community involvement in resource management and planning. Recently, some of this literature turned to the theory on deliberative democracy and demonstrated that a deliberative perspective on participation can help to challenge established practices and contribute with new ideas about how to conduct participation. The purpose of this paper is to consider the latest developments in deliberative democracy and outline the implications arising from these insights for a "deliberative turn" in resource management. A bottom-up protected area establishment, the Goričko Landscape Park, is examined. The empirical case is discussed from a discursive perspective, which relied on John Dryzek's approach to discourse analysis here used to explore the construction of discourses on the use of local natural resources. Two discourses are identified and the way these interfaced with the participatory park establishment process is considered. Findings indicate that advocates of the two discourses engaged differently with the participatory tools used and this had important implications for the park establishment. The case study suggests that, in contexts where participation has been recently introduced, knowledge of discourses on the use of local natural resources and of mobilization strategies actors may pursue could usefully assist in the design and implementation of participatory processes. Copyright © 2011 Elsevier Ltd. All rights reserved.

Student Wellbeing and the Therapeutic Turn in Education

Science.gov (United States)

Wright, Katie

2014-01-01

This article considers current concerns with promoting student mental health and wellbeing against the backdrop of critiques of the "therapeutic turn" in education. It begins by situating accounts of "therapeutic education" within broader theorisation of therapeutic culture. In doing so, the importance of this work is…

Toddlers Help a Peer.

Science.gov (United States)

Hepach, Robert; Kante, Nadine; Tomasello, Michael

2017-09-01

Toddlers are remarkably prosocial toward adults, yet little is known about their helping behavior toward peers. In the present study with 18- and 30-month-old toddlers (n = 192, 48 dyads per age group), one child needed help reaching an object to continue a task that was engaging for both children. The object was within reach of the second child who helped significantly more often compared to a no-need control condition. The helper also fulfilled the peer's need when the task was engaging only for the child needing help. These findings suggest that toddlers' skills and motivations of helping do not depend on having a competent and helpful recipient, such as an adult, but rather they are much more flexible and general. © 2016 The Authors. Child Development © 2016 Society for Research in Child Development, Inc.

Alchemical inflation: inflaton turns into Higgs

Science.gov (United States)

Nakayama, Kazunori; Takahashi, Fuminobu

2012-11-01

We propose a new inflation model in which a gauge singlet inflaton turns into the Higgs condensate after inflation. The inflationary path is characterized by a moduli space of supersymmetric vacua spanned by the inflaton and Higgs field. The inflation energy scale is related to the soft supersymmetry breaking, and the Hubble parameter during inflation is smaller than the gravitino mass. The initial condition for the successful inflation is naturally realized by the pre-inflation in which the Higgs plays a role of the waterfall field.

Alchemical inflation: inflaton turns into Higgs

International Nuclear Information System (INIS)

Nakayama, Kazunori; Takahashi, Fuminobu

2012-01-01

We propose a new inflation model in which a gauge singlet inflaton turns into the Higgs condensate after inflation. The inflationary path is characterized by a moduli space of supersymmetric vacua spanned by the inflaton and Higgs field. The inflation energy scale is related to the soft supersymmetry breaking, and the Hubble parameter during inflation is smaller than the gravitino mass. The initial condition for the successful inflation is naturally realized by the pre-inflation in which the Higgs plays a role of the waterfall field

A proposed residual stress model for oblique turning

International Nuclear Information System (INIS)

Elkhabeery, M. M.

2001-01-01

A proposed mathematical model is presented for predicting the residual stresses caused by turning. Effects of change in tool free length, cutting speed, feed rate, and the tensile strength of work piece material on the maximum residual stress are investigated. The residual stress distribution in the surface region due to turning under unlubricated condition is determined using a deflection etching technique. To reduce the number of experiments required and build the mathematical model for these variables, Response Surface Methodology (RSM) is used. In addition, variance analysis and an experimental check are conducted to determine the prominent parameters and the adequacy of the model. The results show that the tensile stress of the work piece material, cutting speed, and feed rate have significant effects on the maximum residual stresses. The proposed model, that offering good correlation between the experimental and predicted results, is useful in selecting suitable cutting parameters for the machining of different materials. (author)

Optimization of machining parameters of turning operations based on multi performance criteria

Directory of Open Access Journals (Sweden)

N.K.Mandal

2013-01-01

Full Text Available The selection of optimum machining parameters plays a significant role to ensure quality of product, to reduce the manufacturing cost and to increase productivity in computer controlled manufacturing process. For many years, multi-objective optimization of turning based on inherent complexity of process is a competitive engineering issue. This study investigates multi-response optimization of turning process for an optimal parametric combination to yield the minimum power consumption, surface roughness and frequency of tool vibration using a combination of a Grey relational analysis (GRA. Confirmation test is conducted for the optimal machining parameters to validate the test result. Various turning parameters, such as spindle speed, feed and depth of cut are considered. Experiments are designed and conducted based on full factorial design of experiment.

A gate drive circuit for gate-turn-off (GTO) devices in series stack

International Nuclear Information System (INIS)

Despe, O.

1999-01-01

A gate-turn-off (GTO) switch is under development at the Advanced Photon Source as a replacement for a thyratron switch in high power pulsed application. The high voltage in the application requires multiple GTOs connected in series. One component that is critical to the success of GTO operation is the gate drive circuit. The gate drive circuit has to provide fast high-current pulses to the GTO gate for fast turn-on and turn-off. It also has to be able to operate while floating at high voltage. This paper describes a gate drive circuit that meets these requirements

Fermilab turns 50! Congratulations!

CERN Multimedia

Staff Association

2017-01-01

This year Fermilab turns 50 and the celebrations are ongoing. The ties between CERN and Fermilab are numerous and have been ranging from competition between two labs at the forefront of their field, e.g. with the chase of the top quark, finally discovered by Fermilab, to outright collaboration, e.g. on LHC low-beta quadrupole magnet development and production and in the CMS collaboration. In June, in the name of the CERN staff and scientific community, the CERN Staff Association sent a message to the Fermilab staff and scientific community, through Dr. Nigel Lockyer, Fermilab Director. The letter, and the assurance from Nigel Lockyer that the message has been passed onto the Fermilab community can be found on our website. Congratulations to Fermilab on its fiftieth Anniversary, and to the staff and collaborators who made this laboratory through their hard work, dedication and vision!

Required coefficient of friction in the anteroposterior and mediolateral direction during turning at different walking speeds.

Science.gov (United States)

Yamaguchi, Takeshi; Suzuki, Akito; Hokkirigawa, Kazuo

2017-01-01

This study investigated the required coefficient of friction (RCOF) and the tangent of center of mass (COM)-center of pressure (COP) angle in the mediolateral (ML) and anteroposterior (AP) directions during turning at different walking speeds. Sixteen healthy young adults (8 males and 8 females) participated in this study. The participants were instructed to conduct trials of straight walking and 90° step and spin turns to the right at each of three self-selected speeds (slow, normal, and fast). The ML and AP directions during turning gait were defined using the orientation of the pelvis to construct a body-fixed reference frame. The RCOF values and COM-COP angle tangent in the ML direction during turning at weight acceptance phase were higher than those during straight walking, and those values increased with increasing walking speed. The ML component of the RCOF and COM-COP tangent values during weight acceptance for step turns were higher than those for spin turns. The mean centripetal force during turning tended to increase with an increase in walking speed and had a strong positive correlation with the RCOF values in the ML direction (R = 0.97 during the weight acceptance phase; R = 0.95 during the push-off phase). Therefore, turning, particularly step turn, is likely to cause lateral slip at weight acceptance because of the increased centripetal force compared with straight walking. Future work should test at-risk population and compare with the present results.

Required coefficient of friction in the anteroposterior and mediolateral direction during turning at different walking speeds.

Directory of Open Access Journals (Sweden)

Takeshi Yamaguchi

Full Text Available This study investigated the required coefficient of friction (RCOF and the tangent of center of mass (COM-center of pressure (COP angle in the mediolateral (ML and anteroposterior (AP directions during turning at different walking speeds. Sixteen healthy young adults (8 males and 8 females participated in this study. The participants were instructed to conduct trials of straight walking and 90° step and spin turns to the right at each of three self-selected speeds (slow, normal, and fast. The ML and AP directions during turning gait were defined using the orientation of the pelvis to construct a body-fixed reference frame. The RCOF values and COM-COP angle tangent in the ML direction during turning at weight acceptance phase were higher than those during straight walking, and those values increased with increasing walking speed. The ML component of the RCOF and COM-COP tangent values during weight acceptance for step turns were higher than those for spin turns. The mean centripetal force during turning tended to increase with an increase in walking speed and had a strong positive correlation with the RCOF values in the ML direction (R = 0.97 during the weight acceptance phase; R = 0.95 during the push-off phase. Therefore, turning, particularly step turn, is likely to cause lateral slip at weight acceptance because of the increased centripetal force compared with straight walking. Future work should test at-risk population and compare with the present results.

Prediction of beta-turns from amino acid sequences using the residue-coupled model.

Science.gov (United States)

Guruprasad, K; Shukla, S

2003-04-01

We evaluated the prediction of beta-turns from amino acid sequences using the residue-coupled model with an enlarged representative protein data set selected from the Protein Data Bank. Our results show that the probability values derived from a data set comprising 425 protein chains yielded an overall beta-turn prediction accuracy 68.74%, compared with 94.7% reported earlier on a data set of 30 proteins using the same method. However, we noted that the overall beta-turn prediction accuracy using probability values derived from the 30-protein data set reduces to 40.74% when tested on the data set comprising 425 protein chains. In contrast, using probability values derived from the 425 data set used in this analysis, the overall beta-turn prediction accuracy yielded consistent results when tested on either the 30-protein data set (64.62%) used earlier or a more recent representative data set comprising 619 protein chains (64.66%) or on a jackknife data set comprising 476 representative protein chains (63.38%). We therefore recommend the use of probability values derived from the 425 representative protein chains data set reported here, which gives more realistic and consistent predictions of beta-turns from amino acid sequences.

Multiobjective Traffic Signal Control Model for Intersection Based on Dynamic Turning Movements Estimation

Directory of Open Access Journals (Sweden)

Pengpeng Jiao

2014-01-01

Full Text Available The real-time traffic signal control for intersection requires dynamic turning movements as the basic input data. It is impossible to detect dynamic turning movements directly through current traffic surveillance systems, but dynamic origin-destination (O-D estimation can obtain it. However, the combined models of dynamic O-D estimation and real-time traffic signal control are rare in the literature. A framework for the multiobjective traffic signal control model for intersection based on dynamic O-D estimation (MSC-DODE is presented. A state-space model using Kalman filtering is first formulated to estimate the dynamic turning movements; then a revised sequential Kalman filtering algorithm is designed to solve the model, and the root mean square error and mean percentage error are used to evaluate the accuracy of estimated dynamic turning proportions. Furthermore, a multiobjective traffic signal control model is put forward to achieve real-time signal control parameters and evaluation indices. Finally, based on practical survey data, the evaluation indices from MSC-DODE are compared with those from Webster method. The actual and estimated turning movements are further input into MSC-DODE, respectively, and results are also compared. Case studies show that results of MSC-DODE are better than those of Webster method and are very close to unavailable actual values.

Left-turn phase: permissive, protected, or both? A quasi-experimental design in New York City.

Science.gov (United States)

Chen, Li; Chen, Cynthia; Ewing, Reid

2015-03-01

The practice of left-turn phasing selection (permissive, protected-only, or both) varies from one locality to another. The literature evidence on this issue is equally mixed and insufficient. In this study, we evaluate the safety impacts of changing left-turn signal phasing from permissive to protected/permissive or protected-only at 68 intersections in New York City using a rigorous quasi-experimental design accompanied with regression modeling. Changes in police reported crashes including total crashes, multiple-vehicle crashes, left-turn crashes, pedestrian crashes and bicyclist crashes were compared between before period and after period for the treatment group and comparison group by means of negative binomial regression using a Generalized Estimating Equations (GEE) technique. Confounding factors such as the built environment characteristics that were not controlled in comparison group selection are accounted for by this approach. The results show that the change of permissive left-turn signal phasing to protected/permissive or protected-only signal phasing does not result in a significant reduction in intersection crashes. Though the protected-only signal phasing does reduce the left-turn crashes and pedestrian crashes, this reduction was offset by a possible increase in over-taking crashes. These results suggest that left-turn phasing should not be treated as a universal solution that is always better than the permissive control for left-turn vehicles. The selection and implementation of left-turn signal phasing needs to be done carefully, considering potential trade-offs between safety and delay, and many other factors such as geometry, traffic flows and operations. Copyright © 2014 Elsevier Ltd. All rights reserved.

CNC Turning Technician. A Competency-Based Instructional System.

Science.gov (United States)

Sloan, Kelly; Hilley, Robert

This competency-based curriculum guide for instructing students in using computer numerically controlled (CNC) turning machines is one of a series of instructional guides for the machinist field developed in Oklahoma. Although developed jointly with Baxter Technologies Corporation and oriented toward the Baxter Vo-Tec 2000 Future Builder CNC…

Online Memorials 2.0: When Mourning Turns Social

DEFF Research Database (Denmark)

Gotved, Stine

This paper investigates the turn from individual to social online mourning rituals and introduces a research project that follows a new memorial platform where the best from both sides are sought combined. The Danish online memorial site from 2000, mindet.dk, is about to launch in a version 2...

Diamond Turning Of Infra-Red Components

Science.gov (United States)

Hodgson, B.; Lettington, A. H.; Stillwell, P. F. T. C.

1986-05-01

Single point diamond machining of infra-red optical components such as aluminium mirrors, germanium lenses and zinc sulphide domes is potentially the most cost effective method for their manufacture since components may be machined from the blanks to a high surface finish, requiring no subsequent polishing, in a few minutes. Machines for the production of flat surfaces are well established. Diamond turning lathes for curved surfaces however require a high capital investment which can be justified only for research purposes or high volume production. The present paper describes the development of a low cost production machine based on a Bryant Symons diamond turning lathe which is able to machine spherical components to the required form and finish. It employs two horizontal spindles one for the workpiece the other for the tool. The machined radius of curvature is set by the alignment of the axes and the radius of the tool motion, as in conventional generation. The diamond tool is always normal to the workpiece and does not need to be accurately profiled. There are two variants of this basic machine. For machining hemispherical domes the axes are at right angles while for lenses with positive or negative curvature these axes are adjustable. An aspherical machine is under development, based on the all mechanical spherical machine, but in which a ± 2 mm aspherecity may be imposed on the best fit sphere by moving the work spindle under numerical control.

Prediction of the location and type of beta-turns in proteins using neural networks.

OpenAIRE

Shepherd, A. J.; Gorse, D.; Thornton, J. M.

1999-01-01

A neural network has been used to predict both the location and the type of beta-turns in a set of 300 nonhomologous protein domains. A substantial improvement in prediction accuracy compared with previous methods has been achieved by incorporating secondary structure information in the input data. The total percentage of residues correctly classified as beta-turn or not-beta-turn is around 75% with predicted secondary structure information. More significantly, the method gives a Matthews cor...