WorldWideScience

Sample records for helicopter control system

  1. Helicopter controllability

    OpenAIRE

    Carico, Dean

    1989-01-01

    Approved for public release; distribution is unlimited The concept of helicopter controllability is explained. A background study reviews helicopter development in the U.S. General helicopter configurations, linearized equations of motion, stability, and piloting requirements are discussed. Helicopter flight controls, handling qualities, and associated specification are reviewed. Analytical, simulation and flight test methods for evaluating helicopter automatic flight control systems ar...

  2. Modeling, Control and Coordination of Helicopter Systems

    CERN Document Server

    Ren, Beibei; Chen, Chang; Fua, Cheng-Heng; Lee, Tong Heng

    2012-01-01

    Modeling, Control and Coordination of Helicopter Systems provides a comprehensive treatment of helicopter systems, ranging from related nonlinear flight dynamic modeling and stability analysis to advanced control design for single helicopter systems, and also covers issues related to the coordination and formation control of multiple helicopter systems to achieve high performance tasks. Ensuring stability in helicopter flight is a challenging problem for nonlinear control design and development. This book is a valuable reference on modeling, control and coordination of helicopter systems,providing readers with practical solutions for the problems that still plague helicopter system design and implementation. Readers will gain a complete picture of helicopters at the systems level, as well as a better understanding of the technical intricacies involved. This book also: Presents a complete picture of modeling, control and coordination for helicopter systems Provides a modeling platform for a general class of ro...

  3. Adaptive Control System for Autonomous Helicopter Slung Load Operations

    DEFF Research Database (Denmark)

    Bisgaard, Morten; la Cour-Harbo, Anders; Bendtsen, Jan Dimon

    2010-01-01

    system on the helicopter that measures the position of the slung load. The controller is a combined feedforward and feedback scheme for simultaneous avoidance of swing excitation and active swing damping. Simulations and laboratory flight tests show the effectiveness of the combined control system......This paper presents design and verification of an estimation and control system for a helicopter slung load system. The estimator provides position and velocity estimates of the slung load and is designed to augment existing navigation in autonomous helicopters. Sensor input is provided by a vision......, yielding significant load swing reduction compared to the baseline controller....

  4. Modeling, Estimation, and Control of Helicopter Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten

    This thesis treats the subject of autonomous helicopter slung load flight and presents the reader with a methodology describing the development path from modeling and system analysis over sensor fusion and state estimation to controller synthesis. The focus is directed along two different....... To enable slung load flight capabilities for general cargo transport, an integrated estimation and control system is developed for use on already autonomous helicopters. The estimator uses vision based updates only and needs little prior knowledge of the slung load system as it estimates the length...... of the suspension system together with the system states. The controller uses a combined feedforward and feedback approach to simultaneously prevent exciting swing and to actively dampen swing in the slung load. For the mine detection application an estimator is developed that provides full system state information...

  5. Design of a Helicopter Stability and Control Augmentation System Using Optimal Control Theory.

    Science.gov (United States)

    technique is described for the design of multivariable feedback controllers based upon results in optimal control theory . For a specified performance...helicopter flight envelope. The results show that optimal control theory can be used to design a helicopter stability and control augmentation system

  6. Direct Self-Repairing Control for Quadrotor Helicopter Attitude Systems

    Directory of Open Access Journals (Sweden)

    Huiliao Yang

    2014-01-01

    Full Text Available A quadrotor helicopter with uncertain actuator faults, such as loss of effectiveness and lock-in-place, is studied in this paper. An adaptive fuzzy sliding mode controller based on direct self-repairing control is designed for such nonlinear system to track the desired output signal, when any actuator of this quadrotor helicopter is loss of effectiveness or stuck at some place. Moreover, using the Lyapunov stability theory, the stability of the whole system and the convergence of the tracking error can be guaranteed. Finally, the availability of the proposed method is verified by simulation on 3-DOF hover to ensure that the system performance under faulty conditions can be quickly recovered to its normal level. And this proposed method is also proved to be better than that of LQR through simulation.

  7. Framework of Combined Adaptive and Non-adaptive Attitude Control System for a Helicopter Experimental System

    Institute of Scientific and Technical Information of China (English)

    Akira Inoue; Ming-Cong Deng

    2006-01-01

    This paper presents a framework of a combined adaptive and non-adaptive attitude control system for a helicopter experimental system. The design method is based on a combination of adaptive nonlinear control and non-adaptive nonlinear control. With regard to detailed attitude control system design, two schemes are shown for different application cases.

  8. Small unmanned helicopter's attitude controller by an on-line adaptive fuzzy control system

    Institute of Scientific and Technical Information of China (English)

    GAO Tong-yue; RAO Jin-jun; GONG Zhen-bang; LUO Jun

    2009-01-01

    Since small unmanned helicopter flight attitude control process has strong time-varying characteristics and there are random disturbances, the conventional control methods with unchanged parameters are often unworkable. An on-line adaptive fuzzy control system (AFCS) was designed, in a way that does not depend on a process model of the plant or its approximation in the form of a Jacobian matrix. Neither is it necessary to know the desired response at each instant of time. AFCS implement a simultaneous on-line tuning of fuzzy rules and output scale of fuzzy control system. The two cascade controller design with an inner (attitude controller) and outer controller (navigation controller) of the small unmanned helicopter was proposed. At last, an attitude controller based on AFCS was implemented. The flight experiment showed that the proposed fuzzy logic controller provides quicker response, smaller overshoot, higher precision, robustness and adaptive ability. It satisfies the needs of autonomous flight.

  9. Integrated Flight Path Planning System and Flight Control System for Unmanned Helicopters

    Directory of Open Access Journals (Sweden)

    Yu-Hsiang Lin

    2011-07-01

    Full Text Available This paper focuses on the design of an integrated navigation and guidance system for unmanned helicopters. The integrated navigation system comprises two systems: the Flight Path Planning System (FPPS and the Flight Control System (FCS. The FPPS finds the shortest flight path by the A-Star (A* algorithm in an adaptive manner for different flight conditions, and the FPPS can add a forbidden zone to stop the unmanned helicopter from crossing over into dangerous areas. In this paper, the FPPS computation time is reduced by the multi-resolution scheme, and the flight path quality is improved by the path smoothing methods. Meanwhile, the FCS includes the fuzzy inference systems (FISs based on the fuzzy logic. By using expert knowledge and experience to train the FIS, the controller can operate the unmanned helicopter without dynamic models. The integrated system of the FPPS and the FCS is aimed at providing navigation and guidance to the mission destination and it is implemented by coupling the flight simulation software, X-Plane, and the computing software, MATLAB. Simulations are performed and shown in real time three-dimensional animations. Finally, the integrated system is demonstrated to work successfully in controlling the unmanned helicopter to operate in various terrains of a digital elevation model (DEM.

  10. Design of fault tolerant control system for individual blade control helicopters

    Science.gov (United States)

    Tamayo, Sergio

    This dissertation presents the development of a fault tolerant control scheme for helicopters fitted with individually controlled blades. This novel approach attempts to improve fault tolerant capabilities of helicopter control system by increasing control redundancy using additional actuators for individual blade input and software re-mixing to obtain nominal or close to nominal conditions under failure. An advanced interactive simulation environment has been developed including modeling of sensor failure, swashplate actuator failure, individual blade actuator failure, and blade delamination to support the design, testing, and evaluation of the control laws. This simulation environment is based on the blade element theory for the calculation of forces and moments generated by the main rotor. This discretized model allows for individual blade analysis, which in turn allows measuring the consequences of a stuck blade, or loss of the surface area of the blade itself, with respect to the dynamics of the whole helicopter. The control laws are based on non-linear dynamic inversion and artificial neural network augmentation, which is a mix of linear and nonlinear methods that compensates for model inaccuracies due to linearization or failure. A stability analysis based on the Lyapunov function approach has shown that bounded tracking error is guaranteed, and under specific circumstances, global stability is guaranteed as well. An analysis over the degrees of freedom of the mechanical system and its impact over the helicopter handling qualities is also performed to measure the degree of redundancy achieved with the addition of individual blade actuators as compared to a classic swashplate helicopter configuration. Mathematical analysis and numerical simulation, using reconfiguration of the individual blade control under failure have shown that this control architecture can potentially improve the survivability of the aircraft and reduce pilot workload under failure

  11. Sliding Mode Implementation of an Attitude Command Flight Control System for a Helicopter in Hover

    Directory of Open Access Journals (Sweden)

    D. J. McGeoch

    2005-01-01

    Full Text Available This paper presents an investigation into the design of a flight control system, using a decoupled non-linear sliding mode control structure, designed using a linearised, 9th order representation of the dynamics of a PUMA helicopter in hover. The controllers are then tested upon a higher order, non-linear helicopter model, called RASCAL. This design approach is used for attitude command flight control implementation and the control performance is assessed in the terms of handling qualities through the Aeronautical Design Standards for Rotorcraft (ADS-33. In this context a linearised approximation of the helicopter system is used to design an SMC control scheme. These controllers have been found to yield a system that satisfies the Level 1 handling qualities set out by ADS-33. 

  12. Development of an Autonomous Flight Control System for Small Size Unmanned Helicopter Based on Dynamical Model

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    It is devoted to the development of an autonomous flight control system for small size unmanned helicopter based on dynamical model. At first, the mathematical model of a small size helicopter is described. After that simple but effective MTCV control algorithm was proposed. The whole flight control algorithm is composed of two parts:orientation controller based on the model for rotation dynamics and a robust position controller for a double integrator. The MTCV block is also used to achieve translation velocity control. To demonstrate the performance of the presented algorithm, simulation results and results achieved in real flight experiments were presented.

  13. Piloted simulator investigation of helicopter control systems effects on handling qualities during instrument flight

    Science.gov (United States)

    Forrest, R. D.; Chen, R. T. N.; Gerdes, R. M.; Alderete, T. S.; Gee, D. R.

    1979-01-01

    An exploratory piloted simulation was conducted to investigate the effects of the characteristics of helicopter flight control systems on instrument flight handling qualities. This joint FAA/NASA study was motivated by the need to improve instrument flight capability. A near-term objective is to assist in updating the airworthiness criteria for helicopter instrument flight. The experiment consisted of variations of single-rotor helicopter types and levels of stability and control augmentation systems (SCAS). These configurations were evaluated during an omnirange approach task under visual and instrument flight conditions. The levels of SCAS design included a simple rate damping system, collective decoupling plus rate damping, and an attitude command system with collective decoupling. A limited evaluation of stick force versus airspeed stability was accomplished. Some problems were experienced with control system mechanization which had a detrimental effect on longitudinal stability. Pilot ratings, pilot commentary, and performance data related to the task are presented.

  14. ADAPTIVE FLIGHT CONTROL SYSTEM OF ARMED HELICOPTER USING WAVELET NEURAL NETWORK METHOD

    Institute of Scientific and Technical Information of China (English)

    ZHURong-gang; JIANGChangsheng; FENGBin

    2004-01-01

    A discussion is devoted to the design of an adaptive flight control system of the armed helicopter using wavelet neural network method. Firstly, the control loop of the attitude angle is designed with a dynamic inversion scheme in a quick loop and a slow loop. respectively. Then, in order to compensate the error caused by dynamic inversion, the adaptive flight control system of the armed helicopter using wavelet neural network method is put forward, so the BP wavelet neural network and the Lyapunov stable wavelet neural network are used to design the helicopter flight control system. Finally, the typical maneuver flight is simulated to demonstrate its validity and effectiveness. Result proves that the wavelet neural network has an engineering practical value and the effect of WNN is good.

  15. Helicopter vibration reduction using robust control

    OpenAIRE

    Mannchen, Thomas

    2003-01-01

    This dissertation presents a control law for helicopters to reduce vibration and to increase damping using individual blade control. H-infinity control synthesis is used to develop a robust controller usable in different operating conditions with different helicopter flight speeds. The control design is applied in simulation to the four-blade BO 105 helicopter rotor, which is equipped with an individual blade control system, where the pitch rod links are replaced by hydraulic actuators, allow...

  16. A New Hybrid Control Scheme for an Integrated Helicopter and Engine System

    Institute of Scientific and Technical Information of China (English)

    ZHANG Haibo; WANG Jiankang; CHEN Guoqiang; YAN Changkai

    2012-01-01

    A new hybrid control scheme is presented with a robust multiple model fusion control (RMMFC) law for a UH-60 helicopter and an active disturbance rejection control (ADRC) controller for its engines.This scheme is a control design method with every subsystem designed separately but fully considering the couplings between them.With three subspaces with respect to forward flight velocity,a RMMFC is proposed to devise a four-loop reference signal tracing control for the helicopter,which escapes the closed-loop system from unstable state due to the extreme complexity of this integrated nonlinear system.The engines are controlled by the proposed ADRC decoupling controller,which fully takes advantage of a good compensation ability for unmodeled dynamics and extra disturbances,so as to compensate torque disturbance in power turbine speed loop.By simulating a forward acceleration flight task,the RMMFC for the helicopter is validated.It is apparent that the integrated helicopter and engine system (IHES) has much better dynamic performance under the new control scheme.Especially in the switching process,the large transient is significantly weakened,and smooth transition among candidate controllers is achieved.Over the entire simulation task,the droop of power turbine speed with the proposed ADRC controller is significantly slighter than with the conventional PID controller,and the response time of the former is much faster than the latter.By simulating a rapid climb and descent flight task,the results also show the feasibility for the application of the proposed multiple model fusion control.Although there is aggressive power demand in this maneuver,the droop of power turbine speed with an ADRC controller is smaller than using a PID controller.The control performance for helicopter and engine is enhanced by adopting this hybrid control scheme,and simulation results in other envelope stale give proofs of robustness for this new scheme.

  17. Study of Helicopter Roll Control Effectiveness Criteria.

    Science.gov (United States)

    1986-04-01

    variety of helicopter configurations and control system types , and a wide range of flight tasks and maneuvers. The basis of the experimental design...represent a wide range of basic helicopter rotor hub and airframe designs and flight control system types . It was intended to generally limit

  18. Design of a Stability Augmentation System for an Unmanned Helicopter Based on Adaptive Control Techniques

    Directory of Open Access Journals (Sweden)

    Shouzhao Sheng

    2015-09-01

    Full Text Available The task of control of unmanned helicopters is rather complicated in the presence of parametric uncertainties and measurement noises. This paper presents an adaptive model feedback control algorithm for an unmanned helicopter stability augmentation system. The proposed algorithm can achieve a guaranteed model reference tracking performance and speed up the convergence rates of adjustable parameters, even when the plant parameters vary rapidly. Moreover, the model feedback strategy in the algorithm further contributes to the improvement in the control quality of the stability augmentation system in the case of low signal to noise ratios, mainly because the model feedback path is noise free. The effectiveness and superiority of the proposed algorithm are demonstrated through a series of tests.

  19. Type-2 fuzzy logic control of a 2-DOF helicopter (TRMS system)

    Science.gov (United States)

    Zeghlache, Samir; Kara, Kamel; Saigaa, Djamel

    2014-09-01

    The helicopter dynamic includes nonlinearities, parametric uncertainties and is subject to unknown external disturbances. Such complicated dynamics involve designing sophisticated control algorithms that can deal with these difficulties. In this paper, a type 2 fuzzy logic PID controller is proposed for TRMS (twin rotor mimo system) control problem. Using triangular membership functions and based on a human operator experience, two controllers are designed to control the position of the yaw and the pitch angles of the TRMS. Simulation results are given to illustrate the effectiveness of the proposed control scheme.

  20. Neuro-optimal control of helicopter UAVs

    Science.gov (United States)

    Nodland, David; Ghosh, Arpita; Zargarzadeh, H.; Jagannathan, S.

    2011-05-01

    Helicopter UAVs can be extensively used for military missions as well as in civil operations, ranging from multirole combat support and search and rescue, to border surveillance and forest fire monitoring. Helicopter UAVs are underactuated nonlinear mechanical systems with correspondingly challenging controller designs. This paper presents an optimal controller design for the regulation and vertical tracking of an underactuated helicopter using an adaptive critic neural network framework. The online approximator-based controller learns the infinite-horizon continuous-time Hamilton-Jacobi-Bellman (HJB) equation and then calculates the corresponding optimal control input that minimizes the HJB equation forward-in-time. In the proposed technique, optimal regulation and vertical tracking is accomplished by a single neural network (NN) with a second NN necessary for the virtual controller. Both of the NNs are tuned online using novel weight update laws. Simulation results are included to demonstrate the effectiveness of the proposed control design in hovering applications.

  1. Development of swashplateless helicopter blade pitch control system using the limited angle direct-drive motor (LADDM

    Directory of Open Access Journals (Sweden)

    Wang Jian

    2015-10-01

    Full Text Available It can be greatly beneficial to remove the swashplate of conventional helicopter, because the swashplate is usually complicated, aerodynamically resistive, and obstacle of more complex pitch control for improving performance. The present technologies for helicopter vibration reduction are usually narrow in effective range or requiring additional actuators and signal transfer links, and more effective technology is desired. Helicopter blade pitch control system, which is removed of swashplate and integrated high-frequency pitch control function for active vibration reduction, is likely the suitable solution at current technical level. Several potential implementation schemes are discussed, such as blades being directly or indirectly driven by actuators mounted in rotating frame and application of different types of actuators, especially implementation schemes of electro-mechanical actuator with or without gear reducer. It is found that swashplateless blade pitch control system based on specially designed limited angle direct-drive motor (LADDM is a more practical implementation scheme. An experimental prototype of the finally selected implementation scheme has been designed, fabricated and tested on rotor tower. The test results show considerable feasibility of the swashplateless helicopter blade pitch control system using the LADDM.

  2. Development of swashplateless helicopter blade pitch control system using the limited angle direct-drive motor (LADDM)

    Institute of Scientific and Technical Information of China (English)

    Wang Jian; Wang Haowen; Wu Chao

    2015-01-01

    It can be greatly beneficial to remove the swashplate of conventional helicopter, because the swashplate is usually complicated, aerodynamically resistive, and obstacle of more complex pitch control for improving performance. The present technologies for helicopter vibration reduc-tion are usually narrow in effective range or requiring additional actuators and signal transfer links, and more effective technology is desired. Helicopter blade pitch control system, which is removed of swashplate and integrated high-frequency pitch control function for active vibration reduction, is likely the suitable solution at current technical level. Several potential implementation schemes are discussed, such as blades being directly or indirectly driven by actuators mounted in rotating frame and application of different types of actuators, especially implementation schemes of electro-mechanical actuator with or without gear reducer. It is found that swashplateless blade pitch control system based on specially designed limited angle direct-drive motor (LADDM) is a more practical implementation scheme. An experimental prototype of the finally selected implementation scheme has been designed, fabricated and tested on rotor tower. The test results show considerable feasibility of the swashplateless helicopter blade pitch control system using the LADDM.

  3. A New Framework For Helicopter Vibration Suppression; Time-Periodic System Identification and Controller Design

    Science.gov (United States)

    Ulker, Fatma Demet

    In forward flight, helicopter rotor blades function within a highly complex aerodynamic environment that includes both near-blade and far-blade aerodynamic phenomena. These aerodynamic phenomena cause fluctuating aerodynamic loads on the rotor blades. These loads when coupled with the dynamic characteristics and elastic motion of the blade create excessive amount of vibration. These vibrations degrade helicopter performance, passenger comfort and contributes to high cost maintenance problems. In an effort to suppress helicopter vibration, recent studies have developed active control strategies using active pitch links, flaps, twist actuation and higher harmonic control of the swash plate. In active helicopter vibration control, designing a controller in a computationally efficient way requires accurate reduced-order models of complex helicopter aeroelasticity. In previous studies, controllers were designed using aeroelastic models that were obtained by coupling independently reduced aerodynamic and structural dynamic models. Unfortunately, these controllers could not satisfy stability and performance criteria when implemented in high-fidelity computer simulations or real-time experiments. In this thesis, we present a novel approach that provides accurate time-periodic reduced-order models and time-periodic H2 and H infinity controllers that satisfy the stability and performance criteria. Computational efficiency and the necessity of using the approach were validated by implementing an actively controlled flap strategy. In this proposed approach, the reduced-order models were directly identified from high-fidelity coupled aeroelastic analysis by using the time-periodic subspace identification method. Time-periodic H2 and Hinfinity controllers that update the control actuation at every time step were designed. The control synthesis problem was solved using Linear Matrix Inequality and periodic Riccati Equation based formulations, for which an in-house periodic

  4. Development of a resonant trailing-edge flap actuation system for helicopter rotor vibration control

    Science.gov (United States)

    Kim, J.-S.; Wang, K. W.; Smith, E. C.

    2007-12-01

    A resonant trailing-edge flap actuation system for helicopter rotors is developed and evaluated experimentally. The concept involves deflecting each individual trailing-edge flap using a compact resonant piezoelectric actuation system. Each resonant actuation system yields high authority, while operating at a single frequency. By tailoring the natural frequencies of the actuation system (including the piezoelectric actuator and the related mechanical and electrical elements) to the required operating frequencies, one can increase the output authority. The robustness of the device can be enhanced by increasing the high authority bandwidth through electric circuitry design. Such a resonant actuation system (RAS) is analyzed for a full-scale piezoelectric induced-shear tube actuator, and bench-top testing is conducted to validate the concept. An adaptive feed-forward controller is developed to realize the electric network dynamics and adapt to phase variation. The control strategy is then implemented via a digital signal processor (DSP) system. Analysis is also performed to examine the rotor system dynamics in forward flight with piezoelectric resonant actuators, using a perturbation method to evaluate the system's time-varying characteristics. Numerical simulations reveal that the resonant actuator concept can be applied to forward flights as well as to hover conditions.

  5. IMPACT OF AN UNDERSLUNG LOAD ON A HELICOPTER CONTROLLABILITY

    Directory of Open Access Journals (Sweden)

    2016-01-01

    Full Text Available This article is aimed at finding the causes of controllability variations of a helicopter while transporting sling load.The maximum angular acceleration taken by the helicopter at similar controller displacement at different flight speeds was taken as a quantity characteristic of controllability efficiency to study the load impact on the helicopter cont- rollability.This article offers research results obtained with the use of the НеliСargо software. This software has proven to be a great tool for integrated research of the impact of an underslung load on the parameters of a helicopter controllability, and allows carrying out an analysis of the impact of an underslung load on the parameters of controllability under its dyna- mic behavior.The performed computational experiments have shown that the helicopter maximum angular acceleration with an underslung load significantly rises, as compared to a helicopter without cargo or a helicopter carrying the same load inside the cargo compartment. The data obtained during computational experiments corresponds to the results of analytical computations, and is in line with the literature based on the experience of helicopter flight operations.The cause of the variation in the helicopter controllability parameters during transportation of an underslung load has been found, that is - the underslung load considerably increases the main rotor thrust, due to sling load, as compared to a helicopter without cargo. When compared to a helicopter carrying a load inside the cargo compartment, this increased efficiency is mainly attributed to the fact that a helicopter with an underslung load has lower rotational inertia, since the load is not inside the cargo compartment, but outside.The obtained results can be used to improve flight manuals and flight personnel training publications, which could play a significant part in ensuring flight safety and security, and increasing the operational efficiency of

  6. Application of a Broadband Active Vibration Control System to a Helicopter Trim Panel

    Science.gov (United States)

    Cabell, Randolph H.; Schiller, Noah H.; Simon, Frank

    2013-01-01

    This paper discusses testing of a broadband active vibration control concept on an interior trim panel in a helicopter cabin mockup located at ONERA's Centre de Toulouse. The control system consisted of twelve diamond-shaped piezoelectric actuators distributed around a 1.2m x 1.2m trim panel. Accelerometers were mounted at the four vertices of each diamond. The aspect ratio of the diamond was based on the dielectric constants of the piezoelectric material in order to create an actuator-sensor pair that was collocated over a broad frequency range. This allowed robust control to be implemented using simple, low power analog electronics. Initial testing on a thick acrylic window demonstrated the capability of the controller, but actuator performance was less satisfactory when mounted on a composite sandwich trim panel. This may have been due to the orthotropic nature of the trim panel, or due to its much higher stiffness relative to the acrylic window. Insights gained from a finite element study of the actuator-sensor-structural system are discussed.

  7. Heavy Class Helicopter Fuselage Model Drag Reduction by Active Flow Control Systems

    Science.gov (United States)

    De Gregorio, F.

    2017-08-01

    A comprehensive experimental investigation of helicopter blunt fuselage drag reduction using active flow control is being carried out within the European Clean Sky program. The objective is to demonstrate the capability of several active flow technologies to decrease fuselage drag by alleviating the flow separation occurring in the rear area of some helicopters. The work is performed on a simplified blunt fuselage at model-scale. Two different flow control actuators are considered for evaluation: steady blowing, unsteady blowing (or pulsed jets). Laboratory tests of each individual actuator are first performed to assess their performance and properties. The fuselage model is then equipped with these actuators distributed in 3 slots located on the ramp bottom edge. This paper addresses the promising results obtained during the wind-tunnel campaign, since significant drag reductions are achieved for a wide range of fuselage angles of attack and yaw angles without detriment of the other aerodynamic characteristics.

  8. Modelling and Daisy Chaining Control Allocation of a Multirotor Helicopter with a Single Tilting Rotor

    Directory of Open Access Journals (Sweden)

    Robert Porter

    2016-11-01

    Full Text Available This paper presents the development and implementation of a single tilting rotor multirotor helicopter. A single tilting rotor multirotor helicopter is proposed that allows for decoupled lateral acceleration and attitude states. A dynamics model of the proposed multirotor helicopter is established to enable control system development. A control system architecture and daisy chaining-based control allocation scheme is developed and implemented. The control architecture facilitates the control of decoupled lateral accelerations and attitudes. Further, a computational and experimental analysis is undertaken and offers evidence that the proposed multirotor helicopter and control system architecture enables the multirotor helicopter to achieve lateral accelerations without requiring attitude actuation.

  9. Prototype of a tilt rotor helicopter: A helicopter comprising a multi-rotor system with individual collective and cyclic pitch control.

    OpenAIRE

    Napsholm, Svein Rivli

    2013-01-01

    The use of drones and remote operated aircrafts has become a useful tool for the oil and mining industry, when searching for new production areas. The remote controlled aircrafts can perform some of the tasks during these operations such as deploy sensors, gather geographical data and perform area inspections. The smaller and cheaper aircrafts are a cost and time effective solution compared to using bigger helicopters and air planes. In this master thesis, it is proposed a new type of remote ...

  10. The Development of the CONDUIT Advanced Control System Design and Evaluation Interface with a Case Study Application to an Advanced Fly by Wire Helicopter Design

    Science.gov (United States)

    Colbourne, Jason

    1999-01-01

    This report details the development and use of CONDUIT (Control Designer's Unified Interface). CONDUIT is a design tool created at Ames Research Center for the purpose of evaluating and optimizing aircraft control systems against handling qualities. Three detailed design problems addressing the RASCAL UH-60A Black Hawk are included in this report to show the application of CONDUIT to helicopter control system design.

  11. Modeling, State Estimation and Control of Unmanned Helicopters

    Science.gov (United States)

    Lau, Tak Kit

    Unmanned helicopters hold both tremendous potential and challenges. Without risking the lives of human pilots, these vehicles exhibit agile movement and the ability to hover and hence open up a wide range of applications in the hazardous situations. Sparing human lives, however, comes at a stiff price for technology. Some of the key difficulties that arise in these challenges are: (i) There are unexplained cross-coupled responses between the control axes on the hingeless helicopters that have puzzled researchers for years. (ii) Most, if not all, navigation on the unmanned helicopters relies on Global Navigation Satellite Systems (GNSSs), which are susceptible to jamming. (iii) It is often necessary to accommodate the re-configurations of the payload or the actuators on the helicopters by repeatedly tuning an autopilot, and that requires intensive human supervision and/or system identification. For the dynamics modeling and analysis, we present a comprehensive review on the helicopter actuation and dynamics, and contributes toward a more complete understanding on the on-axis and off-axis dynamical responses on the helicopter. We focus on a commonly used modeling technique, namely the phase-lag treatment, and employ a first-principles modeling method to justify that (i) why that phase-lag technique is inaccurate, (ii) how we can analyze the helicopter actuation and dynamics more accurately. Moreover, these dynamics modeling and analysis reveal the hard-to-measure but crucial parameters on a helicopter model that require the constant identifications, and hence convey the reasoning of seeking a model-implicit method to solve the state estimation and control problems on the unmanned helicopters. For the state estimation, we present a robust localization method for the unmanned helicopter against the GNSS outage. This method infers position from the acceleration measurement from an inertial measurement unit (IMU). In the core of our method are techniques of the sensor

  12. Helicopter Flight Control Research - A Demanding Application of Piloted Simulation.

    Science.gov (United States)

    1986-01-01

    Sigma-8 digital computer (used to run the aircraft mathematical model) and an Applied Dynamics AD-4 analogue computer (used principally as a flexible...interface to cockpit instruments, and for motion and visual systems operation) (Fig 4). The first helicopter simulation to use a digital aircraft...34 Control Technology for helicopters. For fixed-wing aircraft, impresive claims were being made for electrically (and later optically) signalled control

  13. Dynamics Analysis of Close-coupling Multiple Helicopters System

    Institute of Scientific and Technical Information of China (English)

    Zhao Zhigang; Lu Tiansheng

    2008-01-01

    The particularity and practicality of harmony operations of close-coupling multiple helicopters indicate that the researches on it are urgent and necessary. Using the model that describes two hovering helicopters carrying one heavy load, an inertia coordinate system and body coordinate systems of each sub-system are established. A nonlinear force model is established too. The equilibrium computation results can be regarded as the reference control inputs of the flight control system under hovering or low-speed flight condition. After the establishment of a translation kinematics model and a posture kinematics model, a coupling dynamics model of the multiple helicopter system is set up. The results can also be regarded as the base to analyze stabilization and design a controller for a close-coupling multiple helicopters harmony operation system.

  14. Swing Damping for Helicopter Slung Load Systems using Delayed Feedback

    DEFF Research Database (Denmark)

    Bisgaard, Morten; la Cour-Harbo, Anders; Bendtsen, Jan Dimon

    2009-01-01

    of swing. The design of the delayed feedback controller is presented as an optimization problem which gives the possibility of an automated design process. Simulations and flight test verifications of the control system on two different autonomous helicopters are presented and it is shown how a significant......This paper presents the design and verification of a swing reducing controller for helicopter slung load systems using intentional delayed feedback. It is intended for augmenting a trajectory tracking helicopter controller and thereby improving the slung load handing capabilities for autonomous...... helicopters. The delayed feedback controller is added to actively reduce oscillations of the slung load by improving the damping of the slung load pendulum modes. Furthermore, it is intended for integration with a feedforward control scheme based on input shaping for concurrent avoidance and dampening...

  15. Development and evaluation of a generic active helicopter vibration controller

    Science.gov (United States)

    Davis, M. W.

    1984-01-01

    A computerized generic active controller is developed, which alleviates helicopter vibration by closed-loop implementation of higher harmonic control (HHC). In the system, the higher harmonic blade pitch is input through a standard helicopter swashplate; for a four-blade helicopter rotor the 4/rev vibration in the rotorcraft is minimized by inducing cyclic pitch motions at 3, 4, and 5/rev in the rotating system. The controller employs the deterministic, cautious, and dual control approaches and two linear system models (local and global), as well as several methods of limiting control. Based on model testing, performed at moderate to high values of forward velocity and rotor thrust, reductions in the rotor test apparatus vibration from 75 to 95 percent are predicted, with HHC pitch amplitudes of less than one degree. Good performance is also noted for short-duration maneuvers.

  16. Output Tracking for Systems with Non-Hyperbolic and Near Non-Hyperbolic Internal Dynamics: Helicopter Hover Control

    Science.gov (United States)

    Devasia, Santosh

    1996-01-01

    A technique to achieve output tracking for nonminimum phase linear systems with non-hyperbolic and near non-hyperbolic internal dynamics is presented. This approach integrates stable inversion techniques, that achieve exact-tracking, with approximation techniques, that modify the internal dynamics to achieve desirable performance. Such modification of the internal dynamics is used (1) to remove non-hyperbolicity which an obstruction to applying stable inversion techniques and (2) to reduce large pre-actuation time needed to apply stable inversion for near non-hyperbolic cases. The method is applied to an example helicopter hover control problem with near non-hyperbolic internal dynamic for illustrating the trade-off between exact tracking and reduction of pre-actuation time.

  17. Helicopter Propulsion Systems

    Science.gov (United States)

    1981-09-01

    r " for the introduction of the gas turbine with its high horsepower output per unit weighL .nd volume, good efficiency, and its virtually unlimited...approach, plus the use of maximum continuous limits for the drive system, would virtually eliminate the pilot’s concern for exceeding time-at-power...is turbine libro . Pour cola, ii faut connaitra parfaitemont les regimes do survitossos (d~rives do r~gulation, etc...) rencontrts sur h6licopto~re en

  18. Flying control of small-type helicopter by detecting its in-air natural features

    Directory of Open Access Journals (Sweden)

    Chinthaka Premachandra

    2015-05-01

    Full Text Available Control of a small type helicopter is an interesting research area in unmanned aerial vehicle development. This study aims to detect a more typical helicopter unequipped with markers as a means by which to resolve the various issues of the prior studies. Accordingly, we propose a method of detecting the helicopter location and pose through using an infrastructure camera to recognize its in-air natural features such as ellipse traced by the rotation of the helicopter's propellers. A single-rotor system helicopter was used as the controlled airframe in our experiments. Here, helicopter location is measured by detecting the main rotor ellipse center and pose is measured following relationship between the main rotor ellipse and the tail rotor ellipse. Following these detection results we confirmed the hovering control possibility of the helicopter through experiments.

  19. Helicopter trajectory planning using optimal control theory

    Science.gov (United States)

    Menon, P. K. A.; Cheng, V. H. L.; Kim, E.

    1988-01-01

    A methodology for optimal trajectory planning, useful in the nap-of-the-earth guidance of helicopters, is presented. This approach uses an adjoint-control transformation along with a one-dimensional search scheme for generating the optimal trajectories. In addition to being useful for helicopter nap-of-the-earth guidance, the trajectory planning solution is of interest in several other contexts, such as robotic vehicle guidance and terrain-following guidance for cruise missiles and aircraft. A distinguishing feature of the present research is that the terrain constraint and the threat envelopes are incorporated in the equations of motion. Second-order necessary conditions are examined.

  20. Neuroevolutionary reinforcement learning for generalized helicopter control

    NARCIS (Netherlands)

    Koppejan, R.; Whiteson, S.

    2009-01-01

    Helicopter hovering is an important challenge problem in the field of reinforcement learning. This paper considers several neuroevolutionary approaches to discovering robust controllers for a generalized version of the problem used in the 2008 Reinforcement Learning Competition, in which wind in the

  1. Development of adaptive helicopter seat systems for aircrew vibration mitigation

    Science.gov (United States)

    Chen, Yong; Wickramasinghe, Viresh; Zimcik, David G.

    2008-03-01

    Helicopter aircrews are exposed to high levels of whole body vibration during flight. This paper presents the results of an investigation of adaptive seat mount approaches to reduce helicopter aircrew whole body vibration levels. A flight test was conducted on a four-blade helicopter and showed that the currently used passive seat systems were not able to provide satisfactory protection to the helicopter aircrew in both front-back and vertical directions. Long-term exposure to the measured whole body vibration environment may cause occupational health issues such as spine and neck strain injuries for aircrew. In order to address this issue, a novel adaptive seat mount concept was developed to mitigate the vibration levels transmitted to the aircrew body. For proof-of-concept demonstration, a miniature modal shaker was properly aligned between the cabin floor and the seat frame to provide adaptive actuation authority. Adaptive control laws were developed to reduce the vibration transmitted to the aircrew body, especially the helmet location in order to minimize neck and spine injuries. Closed-loop control test have been conducted on a full-scale helicopter seat with a mannequin configuration and a large mechanical shaker was used to provide representative helicopter vibration profiles to the seat frame. Significant vibration reductions to the vertical and front-back vibration modes have been achieved simultaneously, which verified the technical readiness of the adaptive mount approach for full-scale flight test on the vehicle.

  2. Identification and stochastic control of helicopter dynamic modes

    Science.gov (United States)

    Molusis, J. A.; Bar-Shalom, Y.

    1983-01-01

    A general treatment of parameter identification and stochastic control for use on helicopter dynamic systems is presented. Rotor dynamic models, including specific applications to rotor blade flapping and the helicopter ground resonance problem are emphasized. Dynamic systems which are governed by periodic coefficients as well as constant coefficient models are addressed. The dynamic systems are modeled by linear state variable equations which are used in the identification and stochastic control formulation. The pure identification problem as well as the stochastic control problem which includes combined identification and control for dynamic systems is addressed. The stochastic control problem includes the effect of parameter uncertainty on the solution and the concept of learning and how this is affected by the control's duel effect. The identification formulation requires algorithms suitable for on line use and thus recursive identification algorithms are considered. The applications presented use the recursive extended kalman filter for parameter identification which has excellent convergence for systems without process noise.

  3. Sliding mode tracking control for miniature unmanned helicopters

    Directory of Open Access Journals (Sweden)

    Bin Xian

    2015-02-01

    Full Text Available A sliding mode control design for a miniature unmanned helicopter is presented. The control objective is to let the helicopter track some predefined velocity and yaw trajectories. A new sliding mode control design method is developed based on a linearized dynamic model. In order to facilitate the control design, the helicopter’s dynamic model is divided into two subsystems, such as the longitudinal-lateral and the heading-heave subsystem. The proposed controller employs sliding mode control technique to compensate for the immeasurable flapping angles’ dynamic effects and external disturbances. The global asymptotic stability (GAS of the closed-loop system is proved by the Lyapunov based stability analysis. Numerical simulations demonstrate that the proposed controller can achieve superior tracking performance compared with the proportional-integral-derivative (PID and linear-quadratic regulator (LQR cascaded controller in the presence of wind gust disturbances.

  4. Sliding mode tracking control for miniature unmanned helicopters

    Institute of Scientific and Technical Information of China (English)

    Xian Bin; Guo Jianchuan; Zhang Yao; Zhao Bo

    2015-01-01

    A sliding mode control design for a miniature unmanned helicopter is presented. The control objective is to let the helicopter track some predefined velocity and yaw trajectories. A new sliding mode control design method is developed based on a linearized dynamic model. In order to facilitate the control design, the helicopter’s dynamic model is divided into two subsystems, such as the longitudinal-lateral and the heading-heave subsystem. The proposed controller employs sliding mode control technique to compensate for the immeasurable flapping angles’ dynamic effects and external disturbances. The global asymptotic stability (GAS) of the closed-loop system is proved by the Lyapunov based stability analysis. Numerical simulations demonstrate that the proposed controller can achieve superior tracking performance compared with the proportional-integral-derivative (PID) and linear-quadratic regulator (LQR) cascaded controller in the presence of wind gust disturbances.

  5. Development of helicopter attitude axes controlled hover flight without pilot assistance and vehicle crashes

    Science.gov (United States)

    Simon, Miguel

    In this work, we show how to computerize a helicopter to fly attitude axes controlled hover flight without the assistance of a pilot and without ever crashing. We start by developing a helicopter research test bed system including all hardware, software, and means for testing and training the helicopter to fly by computer. We select a Remote Controlled helicopter with a 5 ft. diameter rotor and 2.2 hp engine. We equip the helicopter with a payload of sensors, computers, navigation and telemetry equipment, and batteries. We develop a differential GPS system with cm accuracy and a ground computerized navigation system for six degrees of freedom (6-DoF) free flight while tracking navigation commands. We design feedback control loops with yet-to-be-determined gains for the five control "knobs" available to a flying radio-controlled (RC) miniature helicopter: engine throttle, main rotor collective pitch, longitudinal cyclic pitch, lateral cyclic pitch, and tail rotor collective pitch. We develop helicopter flight equations using fundamental dynamics, helicopter momentum theory and blade element theory. The helicopter flight equations include helicopter rotor equations of motions, helicopter rotor forces and moments, helicopter trim equations, helicopter stability derivatives, and a coupled fuselage-rotor helicopter 6-DoF model. The helicopter simulation also includes helicopter engine control equations, a helicopter aerodynamic model, and finally helicopter stability and control equations. The derivation of a set of non-linear equations of motion for the main rotor is a contribution of this thesis work. We design and build two special test stands for training and testing the helicopter to fly attitude axes controlled hover flight, starting with one axis at a time and progressing to multiple axes. The first test stand is built for teaching and testing controlled flight of elevation and yaw (i.e., directional control). The second test stand is built for teaching and

  6. Higher harmonic control analysis for vibration reduction of helicopter rotor systems

    Science.gov (United States)

    Nguyen, Khanh Q.

    1994-01-01

    An advanced higher harmonic control (HHC) analysis has been developed and applied to investigate its effect on vibration reduction levels, blade and control system fatigue loads, rotor performance, and power requirements of servo-actuators. The analysis is based on a finite element method in space and time. A nonlinear time domain unsteady aerodynamic model, based on the indicial response formulation, is used to calculate the airloads. The rotor induced inflow is computed using a free wake model. The vehicle trim controls and blade steady responses are solved as one coupled solution using a modified Newton method. A linear frequency-domain quasi-steady transfer matrix is used to relate the harmonics of the vibratory hub loads to the harmonics of the HHC inputs. Optimal HHC is calculated from the minimization of the vibratory hub loads expressed in term of a quadratic performance index. Predicted vibratory hub shears are correlated with wind tunnel data. The fixed-gain HHC controller suppresses completely the vibratory hub shears for most of steady or quasi-steady flight conditions. HHC actuator amplitudes and power increase significantly at high forward speeds (above 100 knots). Due to the applied HHC, the blade torsional stresses and control loads are increased substantially. For flight conditions where the blades are stalled considerably, the HHC input-output model is quite nonlinear. For such cases, the adaptive-gain controller is effective in suppressing vibratory hub loads, even though HHC may actually increase stall areas on the rotor disk. The fixed-gain controller performs poorly for such flight conditions. Comparison study of different rotor systems indicates that a soft-inplane hingeless rotor requires less actuator power at high speeds (above 130 knots) than an articulated rotor, and a stiff-inplane hingeless rotor generally requires more actuator power than an articulated or a soft-inplane hingeless rotor. Parametric studies for a hingeless rotor

  7. Rice Crop Field Monitoring System with Radio Controlled Helicopter Based Near Infrared Cameras Through Nitrogen Content Estimation and Its Distribution Monitoring

    Directory of Open Access Journals (Sweden)

    Kohei Arai

    2013-03-01

    Full Text Available Rice crop field monitoring system with radio controlled helicopter based near infrared cameras is proposed together with nitrogen content estimation method for monitoring its distribution in the field in concern. Through experiments at the Saga Prefectural Agricultural Research Institute: SPARI, it is found that the proposed system works well for monitoring nitrogen content in the rice crop which indicates quality of the rice crop and its distribution in the field in concern. Therefore, it becomes available to maintain the rice crop fields in terms of quality control.

  8. A Hybrid Flight Control for a Simulated Raptor-30 V2 Helicopter

    Directory of Open Access Journals (Sweden)

    Arbab Nighat Khizer

    2015-04-01

    Full Text Available This paper presents a hybrid flight control system for a single rotor simulated Raptor-30 V2 helicopter. Hybrid intelligent control system, combination of the conventional and intelligent control methodologies, is applied to small model helicopter. The proposed hybrid control used PID as a traditional control and fuzzy as an intelligent control so as to take the maximum advantage of advanced control theory. The helicopter?s model used; comes from X-Plane flight simulator and their hybrid flight control system was simulated using MATLAB/SIMULINK in a simulation platform. X-Plane is also used to visualize the performance of this proposed autopilot design. Through a series of numerous experiments, the operation of hybrid control system was investigated. Results verified that the proposed hybrid control has an excellent performance at hovering flight mode.

  9. Contributions to the dynamics of helicopters with active rotor controls

    Science.gov (United States)

    Malpica, Carlos A.

    This dissertation presents an aeromechanical closed loop stability and response analysis of a hingeless rotor helicopter with a Higher Harmonic Control (HHC) system for vibration reduction. The analysis includes the rigid body dynamics of the helicopter and blade flexibility. The gain matrix is assumed to be fixed and computed off-line. The discrete elements of the HHC control loop are rigorously modeled, including the presence of two different time scales in the loop. By also formulating the coupled rotor-fuselage dynamics in discrete form, the entire coupled helicopter-HHC system could be rigorously modeled as a discrete system. The effect of the periodicity of the equations of motion is rigorously taken into account by converting the system into an equivalent system with constant coefficients and identical stability properties using a time lifting technique. The most important conclusion of the present study is that the discrete elements in the HHC loop must be modeled in any HHC analysis. Not doing so is unconservative. For the helicopter configuration and HHC structure used in this study, an approximate continuous modeling of the HHC system indicates that the closed loop, coupled helicopter-HHC system remains stable for optimal feedback control configurations which the more rigorous discrete analysis shows can result in closed loop instabilities. The HHC gains must be reduced to account for the loss of gain margin brought about by the discrete elements. Other conclusions of the study are: (i) the HHC is effective in quickly reducing vibrations, at least at its design condition, although the time constants associated with the closed loop transient response indicate closed loop bandwidth to be 1 rad/sec on average, thus overlapping with FCS or pilot bandwidths, and raising the issue of potential interactions; (ii) a linearized model of helicopter dynamics is adequate for HHC design, as long as the periodicity of the system is correctly taken into account, i

  10. Optimal Tracking Controller Design for a Small Scale Helicopter

    Institute of Scientific and Technical Information of China (English)

    Agus Budiyono; Singgih S. Wibowo

    2007-01-01

    A model helicopter is more difficult to control than its full scale counterpart. This is due to its greater sensitivity to control inputs and disturbances as well as higher bandwidth of dynamics. This work is focused on designing practical tracking controller for a small scale helicopter following predefined trajectories. A tracking controller based on optimal control theory is synthesized as a part of the development of an autonomous helicopter. Some issues with regards to control constraints are addressed.The weighting between state tracking performance and control power expenditure is analyzed. Overall performance of the control design is evaluated based on its time domain histories of trajectories as well as control inputs.

  11. An Investigation of Multi-Axis Isometric Side-Arm Controllers in a Variable Stability Helicopter(Etude de Systeme de Controle Lateral Isometrique a Axes Multiples a Bord d’un Helicoptere a Stabilite Variable).

    Science.gov (United States)

    1981-08-01

    helicopter pilot and consequently has the status of an international standard. The benefits gained in any substantial deviation from this arrangement must be...questions which were designed to highlight the benefits and deficiencies of the multi-axis isometric control system. The questions and abbreviated...34 ambidextrous " by installing controllers for both left and right hand operation. Such a system would have a fundamental influence on cockpit layout since

  12. A cable detection lidar system for helicopters

    Science.gov (United States)

    Grossmann, Benoist; Capbern, Alain; Defour, Martin; Fertala, Remi

    1992-01-01

    Helicopters in low-level flight are endangered by power lines or telephone wires, especially when flying at night and under poor visibility conditions. In order to prevent 'wire strike', Thomson has developed a lidar system consisting of a pulsed diode laser emitting in the near infrared region (lambda = 0.9 microns). The HOWARD (Helicopter Obstacle Warning and Detection) System utilizes a high repetition rate diode laser (PRE = 20 KHz) along with counter-rotating prisms for laser beam deflection with a total field of view of 30 degrees. This system was successfully field tested in 1991. HOWARD can detect one inch wires at ranges up to 200 meters. We are presently in the process of developing a flyable compact lidar system capable of detection ranges in the order of 400 meters.

  13. Nonlinear Feedforward Control for Wind Disturbance Rejection on Autonomous Helicopter

    DEFF Research Database (Denmark)

    Bisgaard, Morten; la Cour-Harbo, Anders; A. Danapalasingam, Kumeresan

    2010-01-01

    for the purpose. The model is inverted for the calculation of rotor collective and cyclic pitch angles given the wind disturbance. The control strategy is then applied on a small helicopter in a controlled wind environment and flight tests demonstrates the effectiveness and advantage of the feedforward controller.......This paper presents the design and verification of a model based nonlinear feedforward controller for wind disturbance rejection on autonomous helicopters. The feedforward control is based on a helicopter model that is derived using a number of carefully chosen simplifications to make it suitable...

  14. Small-Scale Helicopter Automatic Autorotation: Modeling, Guidance, and Control

    NARCIS (Netherlands)

    Taamallah, S.

    2015-01-01

    Our research objective consists in developing a, model-based, automatic safety recovery system, for a small-scale helicopter Unmanned Aerial Vehicle (UAV) in autorotation, i.e. an engine OFF flight condition, that safely flies and lands the helicopter to a pre-specified ground location. In pursuit o

  15. Fully controlled helicopter for 3D-reconstruction of buildings and survey applications

    Science.gov (United States)

    Lehmann, Raimund; Staiger, Stefan; Schröder, Werner

    2011-05-01

    At the Hochschule Offenburg, a fully controlled helicopter has been developed, which is very easy to fly by anybody and can be flown very close to objects. The flight control system consists of an attitude and heading reference system, an inertial navigator augmented by GPS and a flight control computer. The electrically driven helicopter can easily carry payloads of more than 1 kg. With this helicopter high resolution pictures were taken from parts of the Freiburg cathedral. Also pictures with a calibrated camera of terrain have been taken. Pictures were paired and using a commercial software, a 3D-model of a part of the top of the "Hahnenturm" of the Freiburg cathedral has been generated. The terrain pictures have been bundled and used to precisely measure the position of certain objects in the terrain. The first results of these trials are very promising in respect to future applications of the helicopter.

  16. Sensitivity analysis of helicopter IMC decelerating steep approach and landing performance to navigation system parameters

    Science.gov (United States)

    Karmali, M. S.; Phatak, A. V.

    1982-01-01

    Results of a study to investigate, by means of a computer simulation, the performance sensitivity of helicopter IMC DSAL operations as a function of navigation system parameters are presented. A mathematical model representing generically a navigation system is formulated. The scenario simulated consists of a straight in helicopter approach to landing along a 6 deg glideslope. The deceleration magnitude chosen is 03g. The navigation model parameters are varied and the statistics of the total system errors (TSE) computed. These statistics are used to determine the critical navigation system parameters that affect the performance of the closed-loop navigation, guidance and control system of a UH-1H helicopter.

  17. Helicopter

    NARCIS (Netherlands)

    Van Holten, T.

    2004-01-01

    The invention relates to a helicopter provided with a rotor with at least one rotor blade (5), wherein drive means are provided for actively moving the or each rotor blade up and down during rotation of the rotor, in particular about a flapping hinge (8) thereof, so that moments, applied by the roto

  18. Active structural acoustic control of helicopter interior multifrequency noise using input-output-based hybrid control

    Science.gov (United States)

    Ma, Xunjun; Lu, Yang; Wang, Fengjiao

    2017-09-01

    This paper presents the recent advances in reduction of multifrequency noise inside helicopter cabin using an active structural acoustic control system, which is based on active gearbox struts technical approach. To attenuate the multifrequency gearbox vibrations and resulting noise, a new scheme of discrete model predictive sliding mode control has been proposed based on controlled auto-regressive moving average model. Its implementation only needs input/output data, hence a broader frequency range of controlled system is modelled and the burden on the state observer design is released. Furthermore, a new iteration form of the algorithm is designed, improving the developing efficiency and run speed. To verify the algorithm's effectiveness and self-adaptability, experiments of real-time active control are performed on a newly developed helicopter model system. The helicopter model can generate gear meshing vibration/noise similar to a real helicopter with specially designed gearbox and active struts. The algorithm's control abilities are sufficiently checked by single-input single-output and multiple-input multiple-output experiments via different feedback strategies progressively: (1) control gear meshing noise through attenuating vibrations at the key points on the transmission path, (2) directly control the gear meshing noise in the cabin using the actuators. Results confirm that the active control system is practical for cancelling multifrequency helicopter interior noise, which also weakens the frequency-modulation of the tones. For many cases, the attenuations of the measured noise exceed the level of 15 dB, with maximum reduction reaching 31 dB. Also, the control process is demonstrated to be smoother and faster.

  19. Helicopter individual-blade-control and its applications

    Science.gov (United States)

    Ham, N. D.

    1984-01-01

    A new, advanced type of active control for helicopters and its applications are described. The system, based on previously developed M.I.T. Individual-Blade-Control hardware, employs blade-mounted accelerometers to sense blade motion and feeds back information to control blade pitch in such a manner as to reduce the response of selected blade modes. A linear model of the blade and control system dynamics is used to give guidance in the design process as well as to aid in analysis of experimental results. System performance in wind tunnel tests is described, and evidence is given of the system's ability to provide substantial reduction in blade modal responses, including blade bending vibration.

  20. Flight test results of the fuzzy logic adaptive controller-helicopter (FLAC-H)

    Science.gov (United States)

    Wade, Robert L.; Walker, Gregory W.

    1996-05-01

    The fuzzy logic adaptive controller for helicopters (FLAC-H) demonstration is a cooperative effort between the US Army Simulation, Training, and Instrumentation Command (STRICOM), the US Army Aviation and Troop Command, and the US Army Missile Command to demonstrate a low-cost drone control system for both full-scale and sub-scale helicopters. FLAC-H was demonstrated on one of STRICOM's fleet of full-scale rotary-winged target drones. FLAC-H exploits fuzzy logic in its flight control system to provide a robust solution to the control of the helicopter's dynamic, nonlinear system. Straight forward, common sense fuzzy rules governing helicopter flight are processed instead of complex mathematical models. This has resulted in a simplified solution to the complexities of helicopter flight. Incorporation of fuzzy logic reduced the cost of development and should also reduce the cost of maintenance of the system. An adaptive algorithm allows the FLAC-H to 'learn' how to fly the helicopter, enabling the control system to adjust to varying helicopter configurations. The adaptive algorithm, based on genetic algorithms, alters the fuzzy rules and their related sets to improve the performance characteristics of the system. This learning allows FLAC-H to automatically be integrated into a new airframe, reducing the development costs associated with altering a control system for a new or heavily modified aircraft. Successful flight tests of the FLAC-H on a UH-1H target drone were completed in September 1994 at the White Sands Missile Range in New Mexico. This paper discuses the objective of the system, its design, and performance.

  1. Neural network-based optimal adaptive output feedback control of a helicopter UAV.

    Science.gov (United States)

    Nodland, David; Zargarzadeh, Hassan; Jagannathan, Sarangapani

    2013-07-01

    Helicopter unmanned aerial vehicles (UAVs) are widely used for both military and civilian operations. Because the helicopter UAVs are underactuated nonlinear mechanical systems, high-performance controller design for them presents a challenge. This paper introduces an optimal controller design via an output feedback for trajectory tracking of a helicopter UAV, using a neural network (NN). The output-feedback control system utilizes the backstepping methodology, employing kinematic and dynamic controllers and an NN observer. The online approximator-based dynamic controller learns the infinite-horizon Hamilton-Jacobi-Bellman equation in continuous time and calculates the corresponding optimal control input by minimizing a cost function, forward-in-time, without using the value and policy iterations. Optimal tracking is accomplished by using a single NN utilized for the cost function approximation. The overall closed-loop system stability is demonstrated using Lyapunov analysis. Finally, simulation results are provided to demonstrate the effectiveness of the proposed control design for trajectory tracking.

  2. Fuzzy Control of Yaw and Roll Angles of a Simulated Helicopter Model Includes Articulated Manipulators

    Directory of Open Access Journals (Sweden)

    Hossein Sadegh Lafmejani

    2015-09-01

    Full Text Available Fuzzy logic controller (FLC is a heuristic method by If-Then Rules which resembles human intelligence and it is a good method for designing Non-linear control systems. In this paper, an arbitrary helicopter model includes articulated manipulators has been simulated with Matlab SimMechanics toolbox. Due to the difficulties of modeling this complex system, a fuzzy controller with simple fuzzy rules has been designed for its yaw and roll angles in order to stabilize the helicopter while it is in the presence of disturbances or its manipulators are moving for a task. Results reveal that a simple FLC can appropriately control this system.

  3. Vision Aided State Estimation for Helicopter Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; la Cour-Harbo, Anders

    2007-01-01

    This paper presents the design and verification of a state estimator for a helicopter based slung load system. The estimator is designed to augment the IMU driven estimator found in many helicopter UAV s and uses vision based updates only. The process model used for the estimator is a simple 4 st...

  4. Full State Estimation for Helicopter Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; la Cour-Harbo, Anders; Bendtsen, Jan Dimon

    2007-01-01

    This paper presents the design of a state estimator system for a generic helicopter based slung load system. The estimator is designed to deliver full rigid body state information for both helicopter and load and is based on the unscented Kalman filter. Two different approaches are investigated......: One based on a parameter free kinematic model and one based on a full aerodynamic helicopter and slung load model. The kinematic model approach uses acceleration and rate information from two Inertial Measurement Units, one on the helicopter and one on the load, to drive a simple kinematic model....... A simple and effective virtual sensor method is developed to maintain the constraints imposed by the wires in the system. The full model based approach uses a complex aerodynamical model to describe the helicopter together with a generic rigid body model. This rigid body model is based on a redundant...

  5. Full State Estimation for Helicopter Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; la Cour-Harbo, Anders; Bendtsen, Jan Dimon

    This paper presents the design of a state estimator system for a generic helicopter based slung load system. The estimator is designed to deliver full rigid body state information for both helicopter and load and is based on the unscented Kalman filter. Two different approaches are investigated......: One based on a parameter free kinematic model and one based on a full aerodynamic helicopter and slung load model. The kinematic model approach uses acceleration and rate information from two Inertial Measurement Units, one on the helicopter and one on the load, to drive a simple kinematic model....... A simple and effective virtual sensor method is developed to maintain the constraints imposed by the wires in the system. The full model based approach uses a complex aerodynamical model to describe the helicopter together with a generic rigid body model. This rigid body model is based on a redundant...

  6. Experimental Validation of a Compound Control Scheme for a Two-Axis Inertially Stabilized Platform with Multi-Sensors in an Unmanned Helicopter-Based Airborne Power Line Inspection System

    OpenAIRE

    2016-01-01

    A compound control scheme is proposed to achieve high control performance for a two-axis inertially stabilized platform (ISP) with multi-sensors applied to an unmanned helicopter (UH)-based airborne power line inspection (APLI) system. Compared with the traditional two closed-loop control scheme that is composed of a high-bandwidth rate loop and a lower bandwidth position loop, a new current loop inside rate loop is particularly designed to suppress the influences of voltage fluctuation from ...

  7. 直升机阵风响应缓和控制律设计%DESIGN AND IMPLEMENTATION OF GUST RESPONSE ALLEVIATION CONTROL SYSTEM FOR HELICOPTERS

    Institute of Scientific and Technical Information of China (English)

    龚华军; 杨一栋

    2004-01-01

    阵风响应缓和研究对于具有强耦合和振动的直升机非常重要,阵风扰动不仅影响直升机的乘座品质和武器投放精度,而且影响直升机的疲劳载荷和强度.本文提出直升机抑制阵风扰动的最优控制律设计方法.优化性能指标要求在阵风扰动下驾驶员处法向过载、飞机姿态变化以及控制信号能量损耗最小.最终所综合的系统工程实现简便,只需在直升机姿态控制系统基础上增加垂直升降速率反馈通道即可.最后使用C语言实现控制律并进行半物理仿真, 仿真结果表明,控制律优化及数字化实现的效果是令人满意的.%Gust response alleviation is very important for helicopters which have strong coupling and vibration. Gust disturbance not only influences the ride quality and the precision of the weapon delivery, but also affects to the structural fatigue load and the strength. The method of an optimal control law to suppress the gust disturbance for helicopters is presented. The optimization requires the minimization of the vertical overload at the pilot′s seat, the attitude variation and the control energy consumption under the gust disturbance. Based on the original control system, the new system can be easily realized by adding a vertical speed feedback passage. In order to develop the real-time operational flight control system, the optimized control law is written in C language. The hybrid simulations prove that the performance of gust response alleviation and the efficiency of digitalization are satisfactory.

  8. Linear decentralized systems with special structure. [for twin lift helicopters

    Science.gov (United States)

    Martin, C. F.

    1982-01-01

    Certain fundamental structures associated with linear systems having internal symmetries are outlined. It is shown that the theory of finite-dimensional algebras and their representations are closely related to such systems. It is also demonstrated that certain problems in the decentralized control of symmetric systems are equivalent to long-standing problems of linear systems theory. Even though the structure imposed arose in considering the problems of twin-lift helicopters, any large system composed of several identical intercoupled control systems can be modeled by a linear system that satisfies the constraints imposed. Internal symmetry can be exploited to yield new system-theoretic invariants and a better understanding of the way in which the underlying structure affects overall system performance.

  9. General equilibrium characteristics of a dual-lift helicopter system

    Science.gov (United States)

    Cicolani, L. S.; Kanning, G.

    1986-01-01

    The equilibrium characteristics of a dual-lift helicopter system are examined. The system consists of the cargo attached by cables to the endpoints of a spreader bar which is suspended by cables below two helicopters. Results are given for the orientation angles of the suspension system and its internal forces, and for the helicopter thrust vector requirements under general circumstances, including nonidentical helicopters, any accelerating or static equilibrium reference flight condition, any system heading relative to the flight direction, and any distribution of the load to the two helicopters. Optimum tether angles which minimize the sum of the required thrust magnitudes are also determined. The analysis does not consider the attitude degrees of freedom of the load and helicopters in detail, but assumes that these bodies are stable, and that their aerodynamic forces in equilibrium flight can be determined independently as functions of the reference trajectory. The ranges of these forces for sample helicopters and loads are examined and their effects on the equilibrium characteristics are given parametrically in the results.

  10. Identification, control and visually-guided behavior for a model helicopter

    Science.gov (United States)

    Saripalli, Srikanth

    Research on unmanned aerial vehicles is motivated by applications where human intervention is impossible, risky or expensive e.g. hazardous material recovery, traffic monitoring, disaster relief support, military operations etc. Due to its vertical take-off, landing and hover capabilities, a helicopter is an attractive platform for such applications. There are significant challenges to building an autonomous robotic helicopter - these span the areas of system identification, low-level control, state estimation, and planning. Towards the goal of fully-autonomous helicopters this thesis makes the following contributions. A continuous-discrete extended Kalman filter has been developed that combines inertial data with GPS and compass data to provide estimates of the 6DOF state of the helicopter. Using this filter a model for the helicopter has been identified based on frequency response techniques. The model has been validated in flight tests on a small helicopter testbed (1.6 m rotor diameter) at speeds upto 5 m/s. Based on evidence from this model a decoupled low-level controller has been developed which is embedded in a control architecture suitable for visually-guided navigation. As a novel application, we show how such a controller can be used to perform trajectory following on the helicopter where the desired trajectories are typical spacecraft landing trajectories, and the only controls available are thrusters. This in effect, produces a low-cost testbed for testing spacecraft landing and hazard avoidance on a planetary surface. Finally, we develop and extensively experimentally characterize algorithms for vision-based autonomous landing, object tracking, and sensor deployment.

  11. Time domain System Identification of Longitudinal Dynamics of Single Rotor Model Helicopter using SIDPAC

    Directory of Open Access Journals (Sweden)

    Arbab Nighat Khizer

    2015-01-01

    Full Text Available This paper presents a time-domain approach for identification of longitudinal dynamics of single rotor model helicopter. A frequency sweep excitation input signal is applied for hover flying mode widely used for space state linearized model. A fully automated programmed flight test method provides high quality flight data for system identification using the computer controlled flight simulator X-plane©. The flight test data were recorded, analyzed and reduced using the SIDPAC (System Identification Programs for Air Craft toolbox for MATLAB, resulting in an aerodynamic model of single rotor helicopter. Finally, the identified model of single rotor helicopter is validated on Raptor 30-class model helicopter at hover showing the reliability of proposed approach

  12. DYNAMICAL VARIABLE STRUCTURE CONTROL OF A HELICOPTER IN VERTICAL FLIGHT

    OpenAIRE

    Sira-Ramirez, Hebertt; Zribi, Mohamed; Ahmad, Shaheen

    1991-01-01

    In this article, a dynamical multivariable discontinuous feedback control strategy of the sliding nlode type is proposed for the altitude stabilization of a nonlinear helicopter model in vertical flight. Vlrhile retaining the basic robustness features associated to sliding mode control policies, the proposed approach also results in smoothed out (i.e., non-chattering) input trajectories and controlled state variable responses.

  13. Study of the helicopter blade running elevation measurement system

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Helicopter blade running elevation measurement is an important measure target in helicopter blade dynamic balance experimentation. The elevation influences the helicopter's security and other performance capabilities. In testing, however, it has been difficult to measure the elevation when the rotor reaches high speeds. To get a simple, fast and highly accurate measurement system, photo electricity technology was applied to measuring the blade running elevation. Discussed is the measurement principle of blade running elevation, the design of the measurement system and analysis of the measurement precision.

  14. Helicopter air resonance modeling and suppression using active control

    Science.gov (United States)

    Takahashi, M. D.; Friedmann, P. P.

    1991-01-01

    A coupled rotor/fuselage helicopter analysis with the important effects of blade torsional flexibility, unsteady aerodynamics, and forward flight is presented. Using this mathematical model, a nominal configuration is selected with an air resonance instability throughout most of its flight envelope. A multivariable compensator is then designed using two swashplate inputs and a single-body roll rate measurement. The controller design is based on the linear quadratic Gaussian technique and the loop transfer recovery method. The controller is shown to suppress the air resonance instability throughout a wide range of helicopter loading conditions and forward flight speeds.

  15. Design and implementation of a GPS-aided inertial navigation system for a helicopter UAV

    Science.gov (United States)

    Kastelan, David R.

    Helicopter unmanned aerial vehicles (UAVs) benefit from vertical takeoff and landing, hover, low-speed, and cruising flight capabilities. This versatility has the expense of nonlinear, unstable, and underactuated system dynamics. These challenges and numerous potential applications make the helicopter UAV an interesting testbed for nonlinear control. A platform for such development has been established in the Applied Nonlinear Controls Lab (ANCL). A miniature helicopter was augmented with a manual/autonomous takeover system and the ANCL Avionics. This payload contains a global positioning system (GPS) receiver, inertial sensors, and communications and computing hardware. Allan variance analysis of inertial sensor data enabled the derivation of a GPS-aided inertial navigation system that was implemented on the ANCL Avionics. This extended Kalman filter (EKF)-based algorithm estimates vehicle position, velocity, and attitude necessary for system identification tasks and control system feedback. Performance validation of this algorithm was demonstrated in simulation and in experimental ground and flight tests.

  16. Maximizing commonality between military and general aviation fly-by-light helicopter system designs

    Science.gov (United States)

    Enns, Russell; Mossman, David C.

    1995-05-01

    In the face of shrinking defense budgets, survival of the United States rotorcraft industry is becoming increasingly dependent on increased sales in a highly competitive civil helicopter market. As a result, only the most competitive rotorcraft manufacturers are likely to survive. A key ingredient in improving our competitive position is the ability to produce more versatile, high performance, high quality, and low cost of ownership helicopters. Fiber optic technology offers a path of achieving these objectives. Also, adopting common components and architectures for different helicopter models (while maintaining each models' uniqueness) will further decrease design and production costs. Funds saved (or generated) by exploiting this commonality can be applied to R&D used to further improve the product. In this paper, we define a fiber optics based avionics architecture which provides the pilot a fly-by-light / digital flight control system which can be implemented in both civilian and military helicopters. We then discuss the advantages of such an architecture.

  17. Design of a numeric simulation platform for integrated turbo-shaft engine/helicopter control system%涡轴发动机/直升机综合控制仿真平台设计

    Institute of Scientific and Technical Information of China (English)

    张海波; 姚文荣; 陈国强

    2011-01-01

    A control simulation platform is designed for UH-60 helicopter /T700 turbo-shaft engine integrated system numeric simulation. The simulation platform includes two parts; host computer program and slave computer program, and they are both developed by VC ++ programming language. Host computer program is composed by UH-60 helicopter and T700 turbo-shaft engine real-time mathematical model, and the slave computer program simulates the embedded engine model and main rotor dynamic model,and carries out a variety of online optimization modes. The two programs above communicate with each other in real time based on TCP/IP protocol, so the transient and state process can be simulated for the integrated helicopter and engine system subjecting to surrounding and control parameters. Simulation results in some optimization control modes are also given throughout the simulation platform, respectively, including those which improve the helicopter traditional performance. The main rotor speed are kept constant or not, and the fast power-tracking mode can improve the helicopter maneuverability. All the simulation results show clearly that the simulation platform can provide an feasible validation in the early stage to implement an new integrated engine /helicopter control system.%建立了UH-60直升机/T700涡轴发动机综合控制数字仿真平台.基于VC++环境开发了包含UH-60直升机/T700涡轴发动机综合实时模型的上位机程序,与运行机载涡轴发动机+旋翼实时模型及在线优化控制模式的下位机程序.两者基于TCP/IP协议实时通讯,可进行模拟实际直/发综合优化控制的数字仿真实验.在该数字仿真环境下,分别给出了提高直升机常规飞行性能的多种优化控制模式仿真、变旋翼转速优化控制以及快速功率跟随控制模式仿真,充分表明该平台可为新一代直/发综合系统的开发研制提供一个可靠的前期数字仿真验证.

  18. Dynamics Control Approaches to Improve Vibratory Environment of the Helicopter Aircrew

    Science.gov (United States)

    Wickramasinghe, Viresh Kanchana

    Although helicopter has become a versatile mode of aerial transportation, high vibration levels leads to poor ride quality for its passengers and aircrew. Undesired vibration transmitted through the helicopter seats have been known to cause fatigue and discomfort to the aircrew in the short-term as well as neck strain and back pain injuries due to long-term exposure. This research study investigated the use of novel active as well as passive methodologies integrated in helicopter seats to mitigate the aircrew exposure to high vibration levels. Due to significantly less certification effort required to modify the helicopter seat structure, application of novel technologies to the seat is more practical compared to flight critical components such as the main rotor to reduce aircrew vibration. In particular, this research effort developed a novel adaptive seat mount approach based on active vibration control technology. This novel design that incorporated two stacked piezoelectric actuators as active struts increases the bending stiffness to avoid the low frequency resonance while generating forces to counteract higher harmonic vibration peaks. A real-time controller implemented using a feed-forward algorithm based on adaptive notches counteracted the forced vibration peaks while a robust feedback control algorithm suppressed the resonance modes. The effectiveness of the adaptive seat mount system was demonstrated through extensive closed-loop control tests on a full-scale helicopter seat using representative helicopter floor vibration profiles. Test results concluded that the proposed adaptive seat mount approach based on active control technology is a viable solution for the helicopter seat vibration control application. In addition, a unique flight test using a Bell-412 helicopter demonstrated that the aircrew is exposed to high levels of vibration during flight and that the whole body vibration spectrum varied substantially depending on operating conditions as

  19. Vision Aided State Estimation for Helicopter Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; la Cour-Harbo, Anders

    2007-01-01

    This paper presents the design and verification of a state estimator for a helicopter based slung load system. The estimator is designed to augment the IMU driven estimator found in many helicopter UAV s and uses vision based updates only. The process model used for the estimator is a simple 4 st...... the estimator is verified using flight data and it is shown that it is capable of reliably estimating the slung load states....

  20. Measures for simulator evaluation of a helicopter obstacle avoidance system

    Science.gov (United States)

    Demaio, Joe; Sharkey, Thomas J.; Kennedy, David; Hughes, Micheal; Meade, Perry

    1993-01-01

    The U.S. Army Aeroflightdynamics Directorate (AFDD) has developed a high-fidelity, full-mission simulation facility for the demonstration and evaluation of advanced helicopter mission equipment. The Crew Station Research and Development Facility (CSRDF) provides the capability to conduct one- or two-crew full-mission simulations in a state-of-the-art helicopter simulator. The CSRDF provides a realistic, full field-of-regard visual environment with simulation of state-of-the-art weapons, sensors, and flight control systems. We are using the CSRDF to evaluate the ability of an obstacle avoidance system (OASYS) to support low altitude flight in cluttered terrain using night vision goggles (NVG). The OASYS uses a laser radar to locate obstacles to safe flight in the aircraft's flight path. A major concern is the detection of wires, which can be difficult to see with NVG, but other obstacles--such as trees, poles or the ground--are also a concern. The OASYS symbology is presented to the pilot on a head-up display mounted on the NVG (NVG-HUD). The NVG-HUD presents head-stabilized symbology to the pilot while allowing him to view the image intensified, out-the-window scene through the HUD. Since interference with viewing through the display is a major concern, OASYS symbology must be designed to present usable obstacle clearance information with a minimum of clutter.

  1. Autonomous Hovering Flight of a Small Helicopter

    Science.gov (United States)

    Ohkura, Akihiro; Tokutake, Hiroshi; Sunada, Shigeru

    During the 20th century, aircraft were only used for transportation. If aircraft can be made small and lightweight, however, they can become tools to assist in everyday life. We developed a small, lightweight co-axial helicopter with a rotor diameter of about 30cm. The mechanisms for varying cyclic pitch of the upper and lower rotors, which are used in the coaxial helicopter for entertainment, are adopted in our develop helicopter. Our developed helicopter is equipped with a flight control system for the attitude and position, which is composed of a micro computer and some sensors. And the helicopter can make autonomous hovering flight just measuring the height and the distances from the walls. The weight of the helicopter is no more than 200g and this helicopter is the lightest helicopter for an autonomous hovering flight among the helicopters where all control systems are onboard, as far as the authors know.

  2. A helicopter flight does not induce significant changes in systemic biomarker profiles.

    Science.gov (United States)

    Kåsin, Jan Ivar; Kjekshus, John; Aukrust, Pål; Mollnes, Tom Eirik; Wagstaff, Anthony

    2009-01-01

    Whole-body vibration and noise are inherent characteristics of helicopter operations. The helicopter pilot is affected by vibration from both low-frequency noise and mechanical vibration sources. The way this energy is transmitted to different tissues and organs depends on intensity, frequency and resonance phenomena within the body. Whole-body vibration is known to affect the muscular and skeletal system in the lower part of the spine, but less is known about the response at the cellular level to this stimulation. In some studies, chronic pathological changes have been described in different types of tissue in people exposed to low-frequency noise and vibration. The aim of the present study was to investigate possible cellular reactions to acute exposure to low-frequency noise and vibration in a helicopter. Thirteen healthy males aged 38 (18-69) years were subjected to a 3.5 h helicopter flight in a Westland Sea King Rescue helicopter. Blood tests taken before and after the flight were analysed for more than 40 parameters, including acute phase reactants, markers of leucocyte and platelet activation, complement and hemostasis markers, as well as a broad panel of cytokines, chemokines, growth factors and cell adhesion molecules. The subjects served as their own controls. With the exception of an increase in vascular cell adhesion molecule-1 (VCAM-1) during the flight, no statistically significant changes in the biomarkers were found after controlling for diurnal variation in the control blood tests, which were observed independently of the helicopter flight. In conclusion, one helicopter flight does not induce measurable changes in systemic biomarkers.

  3. Eye injury risk associated with remote control toy helicopter blades.

    Science.gov (United States)

    Alphonse, Vanessa D; Kemper, Andrew R; Rowson, Steven; Duma, Stefan M

    2012-01-01

    Eye injuries can be caused by a variety of consumer products and toys. Recently, indoor remote controlled (RC) toy helicopters have become very popular. The purpose of this study is to quantify eye injury risk associated with five commercially available RC toy helicopter blades. An experimental matrix of 25 tests was developed to test five different RC toy helicopter blades at full battery power on six postmortem human eyes. A pressure sensor inserted through the optic nerve measured intraocular pressure. Corneal abrasion was assessed post-impact using fluorescein dye. Intraocular pressure was correlated to injury risk for hyphema, lens damage, retinal damage, and globe rupture using published risk functions. All tests resulted in corneal abrasions; however, no other injuries were observed. The 25 tests produced an increase intraocular pressure between 15.2 kPa and 99.3 kPa (114.3 mmHg and 744.7 mmHg). Calculated blade velocities ranged between 16.0 m/s and 25.4 m/s. Injury risk for hyphema was a maximum of 0.2%. Injury risk for lens damage, retinal damage, and globe rupture was 0.0% for all tests. Blade design parameters such as length and mass did not affect the risk of eye injury. This is the first study to quantify the risk of eye injury from RC toy helicopter blades. While corneal abrasions were observed, more serious eye injuries were neither observed nor predicted to have occurred. Results from this study are critical for establishing safe design thresholds for RC toy helicopter blades so that more serious injuries can be prevented.

  4. ROBUST ATTITUDE CONTROL OF A 3DOF HELICOPTER WITH MULTI-OPERATION POINTS

    Institute of Scientific and Technical Information of China (English)

    Yao YU; Yisheng ZHONG

    2009-01-01

    A 3DOF (three degrees of freedom) helicopter attitude control system with multi-operation points is described as a MIMO time-varying uncertain nonlinear system with unknown constant param-eters, bounded disturbance and nonlinear uncertainty, and a robust output feedback control method based on signal compensation is proposed. A controller designed by this method consists of a nominal controller and a robust compensator. The controller is linear time-invariant and can be realized easily. Robust attitude tracking property of closed-loop system is proven and experimental results show that the designed control system can guarantee high precision robust attitude control under multi-operation points.

  5. Robust Control for Lateral and Longitudinal Channels of Small-Scale Unmanned Helicopters

    Directory of Open Access Journals (Sweden)

    Bao Feng

    2015-01-01

    Full Text Available Lateral and longitudinal channels are two closely related channels whose control stability influences flight performance of small-scale unmanned helicopters directly. This paper presents a robust control approach for lateral and longitudinal channels in the presence of parameter uncertainties and exogenous disturbances. The proposed control approach is performed by two steps. First, by performing system identification in frequency domain, system model of lateral and longitudinal channels can be accurately identified. Then, a robust H∞ state feedback controller is designed to stabilize the helicopter in lateral and longitudinal channels simultaneously under extraneous disturbances situation. The proposed approach takes advantages that it reduces order of the controller by preestimating some parameters (like flapping angles without sacrificing control accuracy. Numerical results show the reliability and effectiveness of the proposed method.

  6. Helicopter human factors

    Science.gov (United States)

    Hart, Sandra G.

    1988-01-01

    The state-of-the-art helicopter and its pilot are examined using the tools of human-factors analysis. The significant role of human error in helicopter accidents is discussed; the history of human-factors research on helicopters is briefly traced; the typical flight tasks are described; and the noise, vibration, and temperature conditions typical of modern military helicopters are characterized. Also considered are helicopter controls, cockpit instruments and displays, and the impact of cockpit design on pilot workload. Particular attention is given to possible advanced-technology improvements, such as control stabilization and augmentation, FBW and fly-by-light systems, multifunction displays, night-vision goggles, pilot night-vision systems, night-vision displays with superimposed symbols, target acquisition and designation systems, and aural displays. Diagrams, drawings, and photographs are provided.

  7. Helicopter internal noise control: Three case histories

    Science.gov (United States)

    Edwards, B. D.; Cox, C. R.

    1978-01-01

    Case histories are described in which measurable improvements in the cabin noise environments of the Bell 214B, 206B, and 222 were realized. These case histories trace the noise control efforts followed in each vehicle. Among the design approaches considered, the addition of a fluid pulsation damper in a hydraulic system and the installation of elastomeric engine mounts are highlighted. It is concluded that substantial weight savings result when the major interior noise sources are controlled by design, both in altering the noise producing mechanism and interrupting the sound transmission paths.

  8. An Algebraic Approach for the MIMO Control of Small Scale Helicopter

    CERN Document Server

    Budiyono, A

    2008-01-01

    The control of small-scale helicopter is a MIMO problem. To use of classical control approach to formally solve a MIMO problem, one needs to come up with multidimensional Root Locus diagram to tune the control parameters. The problem with the required dimension of the RL diagram for MIMO design has forced the design procedure of classical approach to be conducted in cascaded multi-loop SISO system starting from the innermost loop outward. To implement this control approach for a helicopter, a pitch and roll attitude control system is often subordinated to a, respectively, longitudinal and lateral velocity control system in a nested architecture. The requirement for this technique to work is that the inner attitude control loop must have a higher bandwidth than the outer velocity control loop which is not the case for high performance mini helicopter. To address the above problems, an algebraic design approach is proposed in this work. The designed control using s-CDM approach is demonstrated for hovering cont...

  9. Design and Flight Test of a Cable Angle Feedback Control System for Improving Helicopter Slung Load Operations at Low Speed

    Science.gov (United States)

    2014-04-01

    11-13 May 2010. [21] Anon., Aeronautical design Standard, Handling Quality Requirements for Military Rotorcraft , ADS- 33E-PRF, U.S. Army Aviation...Dec 1989. [47] Cheng, R.P., Rotorcraft Flight Control Design Using Quantitative Feedback Theory and Dynamic Crossfeeds, Master’s Thesis, California...Cheung, K.K., Berger, T., Berrios, M., “Handling- Qualities Optimization and Trade-offs in Rotorcraft Flight Control Design ,” Proceedings of the RAeS

  10. An Investigation of Multiple Unmanned Aircraft Systems Control from the Cockpit of an AH-64 Apache Helicopter

    Science.gov (United States)

    2014-12-01

    workload equally among different robots. Dynamic and temporary hierarchies were developed for task auctions when time constraints between tasks were...Proceedings of the Human Factors and Ergonomics Society Annual Meeting; 2004 Sep 20–24; New Orleans, LA. San Francisco (CA): SAGE Journals; c2004. Also...a dynamic control task. Ergonomics .1999;(42):462–492. Fern L, Shively RJ. A comparison of varying levels of automation on the supervisory control of

  11. Model Predictive Control for a Small Scale Unmanned Helicopter

    Directory of Open Access Journals (Sweden)

    Jianfu Du

    2008-11-01

    Full Text Available Kinematical and dynamical equations of a small scale unmanned helicoper are presented in the paper. Based on these equations a model predictive control (MPC method is proposed for controlling the helicopter. This novel method allows the direct accounting for the existing time delays which are used to model the dynamics of actuators and aerodynamics of the main rotor. Also the limits of the actuators are taken into the considerations during the controller design. The proposed control algorithm was verified in real flight experiments where good perfomance was shown in postion control mode.

  12. 3D Vision Based Landing Control of a Small Scale Autonomous Helicopter

    Directory of Open Access Journals (Sweden)

    Zhenyu Yu

    2008-11-01

    Full Text Available Autonomous landing is a challenging but important task for Unmanned Aerial Vehicles (UAV to achieve high level of autonomy. The fundamental requirement for landing is the knowledge of the height above the ground, and a properly designed controller to govern the process. This paper presents our research results in the study of landing an autonomous helicopter. The abovetheground height sensing is based on a 3D vision system. We have designed a simple planefitting method for estimating the height over the ground. The method enables vibration free measurement with the camera rigidly attached on the helicopter without using complicated gimbal or active vision mechanism. The estimated height is used by the landing control loop. Considering the ground effect during landing, we have proposed a twostage landing procedure. Two controllers are designed for the two landing stages respectively. The sensing approach and control strategy has been verified in field flight test and has demonstrated satisfactory performance.

  13. 3D Vision Based Landing Control of a Small Scale Autonomous Helicopter

    OpenAIRE

    Zhenyu Yu; Kenzo Nonami; Jinok Shin; Demian Celestino

    2007-01-01

    Autonomous landing is a challenging but important task for Unmanned Aerial Vehicles (UAV) to achieve high level of autonomy. The fundamental requirement for landing is the knowledge of the height above the ground, and a properly designed controller to govern the process. This paper presents our research results in the study of landing an autonomous helicopter. The abovetheground height sensing is based on a 3D vision system. We have designed a simple planefitting method for e...

  14. Comparison of three controllers applied to helicopter vibration

    Science.gov (United States)

    Leyland, Jane A.

    1992-01-01

    A comparison was made of the applicability and suitability of the deterministic controller, the cautious controller, and the dual controller for the reduction of helicopter vibration by using higher harmonic blade pitch control. A randomly generated linear plant model was assumed and the performance index was defined to be a quadratic output metric of this linear plant. A computer code, designed to check out and evaluate these controllers, was implemented and used to accomplish this comparison. The effects of random measurement noise, the initial estimate of the plant matrix, and the plant matrix propagation rate were determined for each of the controllers. With few exceptions, the deterministic controller yielded the greatest vibration reduction (as characterized by the quadratic output metric) and operated with the greatest reliability. Theoretical limitations of these controllers were defined and appropriate candidate alternative methods, including one method particularly suitable to the cockpit, were identified.

  15. Merged Vision and GPS Control of a Semi-Autonomous, Small Helicopter

    Science.gov (United States)

    Rock, Stephen M.

    1999-01-01

    This final report documents the activities performed during the research period from April 1, 1996 to September 30, 1997. It contains three papers: Carrier Phase GPS and Computer Vision for Control of an Autonomous Helicopter; A Contestant in the 1997 International Aerospace Robotics Laboratory Stanford University; and Combined CDGPS and Vision-Based Control of a Small Autonomous Helicopter.

  16. Selected topics on the active control of helicopter aeromechanical and vibration problems

    Science.gov (United States)

    Friedmann, Peretz P.

    1994-01-01

    This paper describes in a concise manner three selected topics on the active control of helicopter aeromechanical and vibration problems. The three topics are as follows: (1) the active control of helicopter air-resonance using an LQG/LTR approach; (2) simulation of higher harmonic control (HHC) applied to a four bladed hingeless helicopter rotor in forward flight; and (3) vibration suppression in forward flight on a hingeless helicopter rotor using an actively controlled, partial span, trailing edge flap, which is mounted on the blade. Only a few selected illustrative results are presented. The results obtained clearly indicate that the partial span, actively controlled flap has considerable potential for vibration reduction in helicopter rotors.

  17. Refinement and evaluation of helicopter real-time self-adaptive active vibration controller algorithms

    Science.gov (United States)

    Davis, M. W.

    1984-01-01

    A Real-Time Self-Adaptive (RTSA) active vibration controller was used as the framework in developing a computer program for a generic controller that can be used to alleviate helicopter vibration. Based upon on-line identification of system parameters, the generic controller minimizes vibration in the fuselage by closed-loop implementation of higher harmonic control in the main rotor system. The new generic controller incorporates a set of improved algorithms that gives the capability to readily define many different configurations by selecting one of three different controller types (deterministic, cautious, and dual), one of two linear system models (local and global), and one or more of several methods of applying limits on control inputs (external and/or internal limits on higher harmonic pitch amplitude and rate). A helicopter rotor simulation analysis was used to evaluate the algorithms associated with the alternative controller types as applied to the four-bladed H-34 rotor mounted on the NASA Ames Rotor Test Apparatus (RTA) which represents the fuselage. After proper tuning all three controllers provide more effective vibration reduction and converge more quickly and smoothly with smaller control inputs than the initial RTSA controller (deterministic with external pitch-rate limiting). It is demonstrated that internal limiting of the control inputs a significantly improves the overall performance of the deterministic controller.

  18. Physician staffed helicopter emergency medical service dispatch via centralised control or directly by crew – case identification rates and effect on the Sydney paediatric trauma system

    Directory of Open Access Journals (Sweden)

    Garner Alan A

    2012-12-01

    Full Text Available Abstract Background Severe paediatric trauma patients benefit from direct transport to dedicated Paediatric Trauma Centres (PTC. Parallel case identification systems utilising paramedics from a centralised dispatch centre versus the crew of a physician staffed Helicopter Emergency Medical Service (HEMS allowed comparison of the two systems for case identification rates and subsequent timeliness of direct transfer to a PTC. Methods Paediatric trauma patients over a two year period from the Sydney region with an Injury Severity Score (ISS > 15 were retrospectively identified from a state wide trauma registry. Overall paediatric trauma system performance was assessed by comparisons of the availability of the physician staffed HEMS for patient characteristics, transport mode (direct versus indirect and the times required for the patient to arrive at the paediatric trauma centre. The proportion of patients transported directly to a PTC was compared between the times that the HEMS service was available versus the time that it was unavailable to determine if the HEMS system altered the rate of direct transport to a PTC. Analysis of variance was used to compare the identifying systems for various patient characteristics when the HEMS was available. Results Ninety nine cases met the inclusion criteria, 44 when the HEMS system was operational. Patients identified for physician response by the HEMS system were significantly different to those that were not identified with higher median ISS (25 vs 18, p = 0.011, and shorter times to PTC (67 vs 261mins, p = 0.015 and length of intensive care unit stays (2 vs 0 days, p = 0.045. Of the 44 cases, 21 were not identified, 3 were identified by the paramedic system and 20 were identified by the HEMS system, (P  Conclusions Physician staffed HEMS crew dispatch is significantly more likely to identify cases of severe paediatric trauma and is associated with a greater proportion of transports

  19. Response of the skeletal system to helicopter-unique vibration.

    Science.gov (United States)

    Gearhart, J R

    1978-01-01

    An 18-month prospective skeletal system study was conducted on flying and nonflying personnel relative to chronic low-frequency vibration as experienced in helicopter flight. The aviators were initial entry students in rotary-wing training while the non-flying participants were beginning basic military training. Comparisons were made on the basis of anthropometric measurements, radiological studies, and bone mineral density changes as measured by photon absorption. The bone mineral densitometry showed no significant variation in the aviator group. A short-term 10% demineralization of the distal ulna in the non-flying group was noted immediately following the physical training. The final bone mineral density of basic training subjects returned to the initial level 18 months after the physical training. It was concluded that the helicopter aircrew members under study were exposed to levels of vibration below the threshold of vibration required to produce a measurable change in the skeletal system.

  20. A General Simulink System of Feedforward Vibration Control and Its Application for Helicopter Vibration Control%通用的前馈振动控制Simulink仿真系统及其应用

    Institute of Scientific and Technical Information of China (English)

    鲁民月; 顾仲权

    2001-01-01

    The general simulation systems for feedforward vibration control based on adaptive filter technique are set up on the base of Simulink platform.According to these simulation systems the active control of structural responses for helicopter is simulated.In order to simulate the mechanical behaviors of the plant,a free-free beam model with servo-hydraulic inertial actuator is used,which is excited by dual-harmonic force.On this model some adaptive filters,such as FIR,SIIR,are independently used to identify and control the vibration system.Based on the simulation studies for different kinds of control modes and corresponding algorithms,the features,such as asymptotic of algorithm,the rate of convergence are discovered.Finally,some useful comments are given for further research.%利用Simulink平台,建立一个基于自适应滤波技术的前馈振动控制的通用仿真系统,并对直升机结构响应主动控制进行仿真研究。为了摸拟机体的力学特性以及旋翼对机体的激振作用,本文建立了一个带伺服液压惯性式作动器的自由一自由梁模型,并使之处于双频扰力作用下,对于该模型,采用了FIR,SIIR等滤波模型进行识别和控制。通过对不同控制模式和与之相适应的滤波算法的仿真研究,揭示其算法收敛性和收敛速度等特性。

  1. Smart helicopter rotors optimization and piezoelectric vibration control

    CERN Document Server

    Ganguli, Ranjan; Viswamurthy, Sathyamangalam Ramanarayanan

    2016-01-01

    Exploiting the properties of piezoelectric materials to minimize vibration in rotor-blade actuators, this book demonstrates the potential of smart helicopter rotors to achieve the smoothness of ride associated with jet-engined, fixed-wing aircraft. Vibration control is effected using the concepts of trailing-edge flaps and active-twist. The authors’ optimization-based approach shows the advantage of multiple trailing-edge flaps and algorithms for full-authority control of dual trailing-edge-flap actuators are presented. Hysteresis nonlinearity in piezoelectric stack actuators is highlighted and compensated by use of another algorithm. The idea of response surfaces provides for optimal placement of trailing-edge flaps. The concept of active twist involves the employment of piezoelectrically induced shear actuation in rotating beams. Shear is then demonstrated for a thin-walled aerofoil-section rotor blade under feedback-control vibration minimization. Active twist is shown to be significant in reducing vibra...

  2. Design, fabrication and testing of two electrohydraulic vibration isolation systems for helicopter environments

    Science.gov (United States)

    Allen, R. E.; Calcaterra, P. C.

    1972-01-01

    Two electrohydraulic vibration isolation systems were designed and fabricated to reduce the vertical vibrations transmitted to the XH-51N research helicopter cabin at the blade passage frequency (18 Hz) and its first harmonic (36 Hz). Hydraulic power and electrical control are provided to two separate servoactuators from a common power supply and control electronics package located behind the pilot's seat. One servoactuator is installed between the cabin and fuselage and replaces an existing passive spring. A second servoactuator is mounted between the existing seat and cabin floor. Both servoactuators incorporate a mechanical failsafe design. The control electronics circuitry provides automatic tracking of the blade passage frequency. Results of laboratory, environmental and ground vibration tests employing an XH-51A stripped down helicopter fuselage show that the active cabin isolator reduces the vertical vibrations transmitted from the fuselage attachment point to the cabin attachment point at 18 and 36 Hz (or as an alternative, 6 Hz) by better than 90 percent.

  3. Stable Hovering Flight for a Small Unmanned Helicopter Using Fuzzy Control

    Directory of Open Access Journals (Sweden)

    Arbab Nighat Khizer

    2014-01-01

    Full Text Available Stable hover flight control for small unmanned helicopter under light air turbulent environment is presented. Intelligent fuzzy logic is chosen because it is a nonlinear control technique based on expert knowledge and is capable of handling sensor created noise and contradictory inputs commonly encountered in flight control. The fuzzy nonlinear control utilizes these distinct qualities for attitude, height, and position control. These multiple controls are developed using two-loop control structure by first designing an inner-loop controller for attitude angles and height and then by establishing outer-loop controller for helicopter position. The nonlinear small unmanned helicopter model used comes from X-Plane simulator. A simulation platform consisting of MATLAB/Simulink and X-Plane© flight simulator was introduced to implement the proposed controls. The main objective of this research is to design computationally intelligent control laws for hovering and to test and analyze this autopilot for small unmanned helicopter model on X-Plane under ideal and mild turbulent condition. Proposed fuzzy flight controls are validated using an X-Plane helicopter model before being embedded on actual helicopter. To show the effectiveness of the proposed fuzzy control method and its ability to cope with the external uncertainties, results are compared with a classical PD controller. Simulated results show that two-loop fuzzy controllers have a good ability to establish stable hovering for a class of unmanned rotorcraft in the presence of light turbulent environment.

  4. Nonlinear coupled rotor-fuselage helicopter vibration studies with higher harmonic control

    Science.gov (United States)

    Friedmann, P. P.; Venkatesan, C.; Papavassiliou, I.

    1990-01-01

    This paper addresses the problem of vibration prediction and vibration reduction in helicopters by means of active control methodologies. The nonlinear equations of a coupled rotor/flexible-fuselage system have been derived using computer algebra, thus relegating this tedious task to the computer. In the solution procedure the trim state and vibratory response of the helicopter are obtained in a single pass by using a harmonic balance technique and simultaneously satisfying the trim and the vibratory response of the helicopter in all the rotor and fuselage degrees of freedom. Using this solution procedure, the influence of the fuselage flexibility on the vibratory response is studied. In addition, it is shown that the conventional single frequency HHC is capable of reducing either the hub loads or only the fuselage vibrations but not both simultaneously. A new scheme called MHHC, having multiple higher harmonic pitch inputs, was used to accomplish this task of simultaneously reducing both the vibratory hub loads and fuselage vibratory response. In addition, the uniqueness of this MHHC scheme is explained in detail.

  5. STUDY ON FAST TRANSVERSAL FILTER (FTF)ALGORITHM FOR ACTIVE CONTROL OF STRUCTURAL RESPONSE (ACSR) OF HELICOPTER

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    Vibration suppression is one of the most important tasks for helicopter research. ACSR (Active Control of Structural Response) in time domain has turned out to be an effective technique to deal with this issue. In this paper, based on Least Square Principle and ACSR Principle, a multichannel delayed filtered-x FTF (Fast Transversal Filter) algorithm is developed for suppressing helicopter vibration. In order to keep the algorithm running in a stable and efficient state, DRR (Desired Response Reconstruction) technique is developed and a Constraint Stabilization Technique is firstly presented for the developed algorithm. Computer simulations are conducted on attenuating helicopter vibration and remarkable vibration reductions are achieved. The results demonstrate good properties of the obtained FTF algorithm in stability, robustness, convergence speed, tracking capability, etc.. They also show that time delay and DRR technique play important and effective roles in keeping ACSR system working efficiently.

  6. Stabilization and trajectory tracking control for underactuated quadrotor helicopter subject to wind-gust disturbance

    Indian Academy of Sciences (India)

    Mohd Ariffanan Mohd Basri; Abdul Rashid Husain; Kumeresan A Danapalasingam

    2015-08-01

    The control of quadrotor helicopter has been a great challenge for control engineers and researchers since quadrotor is an underactuated and a highly unstable nonlinear system. In this paper, the dynamic model of quadrotor has been derived and a so-called robust optimal backstepping control (ROBC) is designed to address its stabilization and trajectory tracking problem in the existence of external disturbances. The robust controller is achieved by incorporating a prior designed optimal backstepping control (OBC) with a switching function. The control law design utilizes the switching function in order to attenuate the effects caused by external disturbances. In order to eliminate the chattering phenomenon, the sign function is replaced by the saturation function. A new heuristic algorithm namely Gravitational Search Algorithm (GSA) has been employed in designing the OBC. The proposed method is evaluated on a quadrotor simulation environment to demonstrate the effectiveness and merits of the theoretical development. Simulation results show that the proposed ROBC scheme can achieve favorable control performances compared to the OBC for autonomous quadrotor helicopter in the presence of external disturbances.

  7. Design and Testing of Flight Control Laws on the RASCAL Research Helicopter

    Science.gov (United States)

    Frost, Chad R.; Hindson, William S.; Moralez. Ernesto, III; Tucker, George E.; Dryfoos, James B.

    2001-01-01

    Two unique sets of flight control laws were designed, tested and flown on the Army/NASA Rotorcraft Aircrew Systems Concepts Airborne Laboratory (RASCAL) JUH-60A Black Hawk helicopter. The first set of control laws used a simple rate feedback scheme, intended to facilitate the first flight and subsequent flight qualification of the RASCAL research flight control system. The second set of control laws comprised a more sophisticated model-following architecture. Both sets of flight control laws were developed and tested extensively using desktop-to-flight modeling, analysis, and simulation tools. Flight test data matched the model predicted responses well, providing both evidence and confidence that future flight control development for RASCAL will be efficient and accurate.

  8. Experimental Validation of a Compound Control Scheme for a Two-Axis Inertially Stabilized Platform with Multi-Sensors in an Unmanned Helicopter-Based Airborne Power Line Inspection System

    Directory of Open Access Journals (Sweden)

    Xiangyang Zhou

    2016-03-01

    Full Text Available A compound control scheme is proposed to achieve high control performance for a two-axis inertially stabilized platform (ISP with multi-sensors applied to an unmanned helicopter (UH-based airborne power line inspection (APLI system. Compared with the traditional two closed-loop control scheme that is composed of a high-bandwidth rate loop and a lower bandwidth position loop, a new current loop inside rate loop is particularly designed to suppress the influences of voltage fluctuation from power supply and motor back electromotive force (BEMF on control precision. In this way, the stabilization accuracy of the ISP is greatly improved. The rate loop, which is the middle one, is used to improve sensor’s stability precision through compensating for various disturbances. To ensure the pointing accuracy of the line of sight (LOS of multi-sensors, the position loop is designed to be the outer one and acts as the main feedback path, by which the accurate pointing angular position is achieved. To validate the scheme, a series of experiments were carried out. The results show that the proposed compound control scheme can achieve reliable control precision and satisfy the requirements of real APLI tasks.

  9. Robust Near-Hovering Flight Controller for Model-Scale Helicopters Via Parametric Approach

    Institute of Scientific and Technical Information of China (English)

    Zhigang Zhou; Yongan Zhang∗

    2015-01-01

    This paper aims to provide a parametric design for robust flight controller of the model⁃scale helicopter. The main contributions lie in two aspects. Firstly, under near⁃hovering condition, a procedure is presented for simplification of the highly nonlinear and under⁃actuated model of the model⁃scale helicopter. This nonlinear system is linearized around the trim values of the chosen flight mode, followed by decomposing this high⁃order linear model into three lower⁃order subsystems according to the coupling properties among channels. After decomposition, the three subsystems are obtained which include the coupling subsystem between the roll ( pitch) motion and the lateral ( longitudinal) motion, the subsystem of the yaw motion and the subsystem of the vertical motion. Secondly, by using eigenstructure assignment, the problem of flight controller design can be converted into solving two optimization problems and the linear robust controllers of these subsystems are designed through solving these optimization problems. Besides, this paper contrasts and analyzed the performances of the LQR controller and the parametric controller. The results demonstrate the effectiveness and the robustness against the parametric perturbations of the parametric controller.

  10. The effects of speech controls on performance in advanced helicopters in a double stimulation paradigm

    Science.gov (United States)

    Bortolussi, Michael R.; Vidulich, Michael A.

    1991-01-01

    The potential benefit of speech as a control modality has been investigated with mixed results. Earlier studies suggests that speech controls can reduce the potential of manual control overloads and improve time-sharing performance. However, these benefits were not without costs. Pilots reported higher workload levels associated with the use of speech controls. To further investigate these previous findings, an experiment was conducted in a simulation of an advanced single-pilot, scout/attack helicopter at NASA-Ames' ICAB (interchangeable cab) facility. Objective performance data suggested that speech control modality was effective in reducing interference of discrete, time-shared responses during continuous flight control activity. Subjective ratings, however, indicated that the speech control modality increased workload. Post-flight debriefing indicated that these results were mainly due to the increased effort to speak precisely to a less than perfect voice recognition system.

  11. Multivariable Super Twisting Based Robust Trajectory Tracking Control for Small Unmanned Helicopter

    Directory of Open Access Journals (Sweden)

    Xing Fang

    2015-01-01

    Full Text Available This paper presents a highly robust trajectory tracking controller for small unmanned helicopter with model uncertainties and external disturbances. First, a simplified dynamic model is developed, where the model uncertainties and external disturbances are treated as compounded disturbances. Then the system is divided into three interconnected subsystems: altitude subsystem, yaw subsystem, and horizontal subsystem. Second, a disturbance observer based controller (DOBC is designed based upon backstepping and multivariable super twisting control algorithm to obtain robust trajectory tracking property. A sliding mode observer works as an estimator of the compounded disturbances. In order to lessen calculative burden, a first-order exact differentiator is employed to estimate the time derivative of the virtual control. Moreover, proof of the stability of the closed-loop system based on Lyapunov method is given. Finally, simulation results are presented to illustrate the effectiveness and robustness of the proposed flight control scheme.

  12. 基于DSP的微型直升机主动旋翼控制系统硬件设计%Hardware Design of Mini-helicopter Rotor Active Control System Based on DSP

    Institute of Scientific and Technical Information of China (English)

    刘宏; 罗华; 杨淑凤

    2012-01-01

    针对共轴双桨直升机主动旋翼控制的工作原理及其硬件设计方案进行了介绍.该系统主要由三轴加速度计ADXL345和三轴陀螺L3G4200D及TMS320F28335 DSP组成捷联惯导系统.并在捷联惯导姿态控制中增加了旋翼受力反馈环路,提高了惯导对外界扰动的响应速度.通过实验验证,该系统对于提高悬停稳定性和高度控制响应速度具有较好的效果.%The sculls coaxial helicopter active control of the working principle and hardware design solutions were introduced.The system consists of three-axis accelerometer ADXL345 three-axis gyro and L3G4200D and TMS320F28335 DSP components.And attitude control in strap down inertial navigation system(SINS) was added to rotor force feedback loop to improve the response to external disturbances.Experiments show that the system with good results to the hover stability and response speed of height control.

  13. 3D Vision Based Landing Control of a Small Scale Autonomous Helicopter

    Directory of Open Access Journals (Sweden)

    Zhenyu Yu

    2007-03-01

    Full Text Available Autonomous landing is a challenging but important task for Unmanned Aerial Vehicles (UAV to achieve high level of autonomy. The fundamental requirement for landing is the knowledge of the height above the ground, and a properly designed controller to govern the process. This paper presents our research results in the study of landing an autonomous helicopter. The above-the-ground height sensing is based on a 3D vision system. We have designed a simple plane-fitting method for estimating the height over the ground. The method enables vibration free measurement with the camera rigidly attached on the helicopter without using complicated gimbal or active vision mechanism. The estimated height is used by the landing control loop. Considering the ground effect during landing, we have proposed a two-stage landing procedure. Two controllers are designed for the two landing stages respectively. The sensing approach and control strategy has been verified in field flight test and has demonstrated satisfactory performance.

  14. Reduction of Helicopter BVI Noise, Vibration, and Power Consumption Through Individual Blade Control

    Science.gov (United States)

    Jacklin, Stephen A.; Blaas, Achim; Teves, Dietrich; Kube, Roland; Warmbrodt, William (Technical Monitor)

    1994-01-01

    A wind tunnel test was conducted with a full-scale BO 105 helicopter rotor to evaluate the potential of open-loop individual blade control (IBC) to improve rotor performance, to reduce blade vortex interaction (BVI) noise, and to alleviate helicopter vibrations. The wind tunnel test was an international collaborative effort between NASA/U.S. Army AFDD, ZF Luftfahrttechnik, Eurocopter Deutschland, and the German Aerospace Laboratory (DLR) and was conducted under the auspices of the U.S./German MOU on Rotorcraft Aeromechanics. In this test the normal blade pitch links of the rotor were replaced by servo-actuators so that the pitch of each blade could be controlled independently of the other blades. The specially designed servoactuators and IBC control system were designed and manufactured by ZF Luftfahrttechnik, GmbH. The wind tunnel test was conducted in the 40- by 80-Foot Wind Tunnel at the NASA Ames Research Center. An extensive amount of measurement information was acquired for each IBC data point. These data include rotor performance, static and dynamic hub forces and moments, rotor loads, control loads, inboard and outboard blade pitch motion, and BVI noise data. The data indicated very significant (80 percent) simultaneous reductions in both BVI noise and hub vibrations could be obtained using multi-harmonic input at the critical descent (terminal approach) condition. The data also showed that performance improvements of up to 7 percent could be obtained using 2P input at high-speed forward flight conditions.

  15. Reduction of Helicopter BVI Noise, Vibration, and Power Consumption Through Individual Blade Control

    Science.gov (United States)

    Jacklin, Stephen A.; Blaas, Achim; Teves, Dietrich; Kube, Roland; Warmbrodt, William (Technical Monitor)

    1994-01-01

    A wind tunnel test was conducted with a full-scale BO 105 helicopter rotor to evaluate the potential of open-loop individual blade control (IBC) to improve rotor performance, to reduce blade vortex interaction (BVI) noise, and to alleviate helicopter vibrations. The wind tunnel test was an international collaborative effort between NASA/U.S. Army AFDD, ZF Luftfahrttechnik, Eurocopter Deutschland, and the German Aerospace Laboratory (DLR) and was conducted under the auspices of the U.S./German MOU on Rotorcraft Aeromechanics. In this test the normal blade pitch links of the rotor were replaced by servo-actuators so that the pitch of each blade could be controlled independently of the other blades. The specially designed servoactuators and IBC control system were designed and manufactured by ZF Luftfahrttechnik, GmbH. The wind tunnel test was conducted in the 40- by 80-Foot Wind Tunnel at the NASA Ames Research Center. An extensive amount of measurement information was acquired for each IBC data point. These data include rotor performance, static and dynamic hub forces and moments, rotor loads, control loads, inboard and outboard blade pitch motion, and BVI noise data. The data indicated very significant (80 percent) simultaneous reductions in both BVI noise and hub vibrations could be obtained using multi-harmonic input at the critical descent (terminal approach) condition. The data also showed that performance improvements of up to 7 percent could be obtained using 2P input at high-speed forward flight conditions.

  16. Least square based sliding mode control for a quad-rotor helicopter and energy saving by chattering reduction

    Science.gov (United States)

    Sumantri, Bambang; Uchiyama, Naoki; Sano, Shigenori

    2016-01-01

    In this paper, a new control structure for a quad-rotor helicopter that employs the least squares method is introduced. This proposed algorithm solves the overdetermined problem of the control input for the translational motion of a quad-rotor helicopter. The algorithm allows all six degrees of freedom to be considered to calculate the control input. The sliding mode controller is applied to achieve robust tracking and stabilization. A saturation function is designed around a boundary layer to reduce the chattering phenomenon that is a common problem in sliding mode control. In order to improve the tracking performance, an integral sliding surface is designed. An energy saving effect because of chattering reduction is also evaluated. First, the dynamics of the quad-rotor helicopter is derived by the Newton-Euler formulation for a rigid body. Second, a constant plus proportional reaching law is introduced to increase the reaching rate of the sliding mode controller. Global stability of the proposed control strategy is guaranteed based on the Lyapunov's stability theory. Finally, the robustness and effectiveness of the proposed control system are demonstrated experimentally under wind gusts, and are compared with a regular sliding mode controller, a proportional-differential controller, and a proportional-integral-differential controller.

  17. Attitude angle anti-windup control of small size unmanned helicopter

    Science.gov (United States)

    Shao, Taizhou; Long, Haihui; Zhao, Jiankang; Xia, Xuan; Yang, Guang

    2017-01-01

    This paper researches the small-size unmanned helicopter attitude control problem with actuator saturation limit. Traditional approach for this problem is often based on an accurate dynamic model which is complicated and difficult to achieve in engineering. In this paper, we propose an anti-windup PID approach which does not rely on sophicated helicopter dynamic model. The anti-windup PID controller is established by adding a phase-lead compensator to the conventional PID controller. The performance and merits of this proposed controller are exemplified by the simulations between the conventional PID controller and the anti-windup PID controller.

  18. A Randomized Controlled Trial of Core Strengthening Exercises in U.S. Air Force Helicopter Crewmembers with Low Back Pain

    Science.gov (United States)

    2014-12-13

    JP, Albert WJ, Veillete DW, McKenzie NP, Croll JC. Helicopter cockpit seat side and trapezius muscle metabolism with night vision goggles . Aviat...ergonomic layout of helicopter controls leads pilots to adopt a posture in which the torso is forward flexed and tilted to the left. This body... helicopter aircrew members is hypothesized to result from the combination of ergonomic strain (i.e., poor posture ) and exposure to vibration (19). The

  19. Active fault tolerant control based on interval type-2 fuzzy sliding mode controller and non linear adaptive observer for 3-DOF laboratory helicopter.

    Science.gov (United States)

    Zeghlache, Samir; Benslimane, Tarak; Bouguerra, Abderrahmen

    2017-09-14

    In this paper, a robust controller for a three degree of freedom (3 DOF) helicopter control is proposed in presence of actuator and sensor faults. For this purpose, Interval type-2 fuzzy logic control approach (IT2FLC) and sliding mode control (SMC) technique are used to design a controller, named active fault tolerant interval type-2 Fuzzy Sliding mode controller (AFTIT2FSMC) based on non-linear adaptive observer to estimate and detect the system faults for each subsystem of the 3-DOF helicopter. The proposed control scheme allows avoiding difficult modeling, attenuating the chattering effect of the SMC, reducing the rules number of the fuzzy controller. Exponential stability of the closed loop is guaranteed by using the Lyapunov method. The simulation results show that the AFTIT2FSMC can greatly alleviate the chattering effect, providing good tracking performance, even in presence of actuator and sensor faults. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  20. Backstepping Controller with Intelligent Parameters Selection for Stabilization of Quadrotor Helicopter

    Directory of Open Access Journals (Sweden)

    Mohd Ariffanan Mohd Basri

    2016-07-01

    Full Text Available In this paper, the dynamic model of quadrotor helicopter has been mathematically formulated. Then, an intelligent backstepping controller (IBC is designed for the quadrotor altitude and attitude stabilization in the existence of external disturbances and measurement noise. The designed controller consists of a backstepping controller which can automatically select its parameters on-line by a fuzzy supervisory mechanism. The stability criterion for the stabilization of the quadrotor is proven by the Lyapunov theorem. Several numerical simulations using the dynamic model of a four degree of freedom (DOF quadrotor helicopter show the effectiveness of the approach. Besides, the simulation results indicate that the proposed design techniques can stabilize the quadrotor helicopter with better performance than established linear design techniques.

  1. Input Shaping for Helicopter Slung Load Swing Reduction

    DEFF Research Database (Denmark)

    Bisgaard, Morten; la Cour-Harbo, Anders; Bendtsen, Jan Dimon

    2008-01-01

    dampen swing. Simulations and flight tests show the effectiveness of the input shaping applied to a small scale autonomous helicopter slung load system. Both simulations and flight verifications shows significant slung load swing reduction using the proposed trajectory shaping over over flight without......This chapter presents a feedforward swing reducing control system for augmenting already existing helicopter controllers and enables slung load flight with autonomous helicopters general cargo transport. The feedforward controller is designed to avoid excitation of the lightly damped modes...

  2. Simulation and control of a helicopter operating in a ship airwake

    Science.gov (United States)

    Lee, Dooyong

    designed to simulate the gusts when driven by white noise. It is proposed that the stochastic gust model can be used to optimize the automatic flight control system in order to improve disturbance rejection properties of the aircraft. A stability augmentation system (SAS) is optimized for a UH-60 helicopter operating in the turbulent ship airwake. For disturbance rejection, a new performance specification is designed based on the power spectral density of the transfer function from the gust inputs to aircraft rate responses. The baseline limited authority SAS is modified and optimized using CONDUIT (Control Designer's Unified Interface) in order to improve handling-qualities and stability, and to minimize a weighted objective of gust responses. In addition, a Hinfinity controller is designed to provide an alternative SAS configuration. The optimized SAS and H infinity SAS are then tested using the non-linear simulation model with time-varying airwake. Time domain and frequency domain analyses of the simulation show that the modified SAS results in significant reduction of pilot workload.

  3. Concepts for the design of a completely active helicopter isolation system using output vector feedback

    Science.gov (United States)

    Schulz, G.

    1977-01-01

    The theory of output vector feedback (a few measured quantities) is used to derive completely active oscillation isolation functions for helicopters. These feedback controller concepts are tested with various versions of the BO 105 helicopter and their performance is demonstrated. A compensation of the vibrational excitations from the rotor and harmonics of the number of blades are considered. There is also a fast and automatic trim function for maneuvers.

  4. Design of a simple active controller to suppress helicopter air resonance

    Science.gov (United States)

    Takahashi, M. D.; Friedmann, P. P.

    1988-01-01

    A coupled rotor/fuselage helicopter analysis with the important effects of blade torsional flexibility, unsteady aerodynamics, and forward flight is presented. Using this mathematical model, a nominal configuration is selected that experiences an air resonance instability throughout most of its flight envelope. A simple multivariable compensator using conventional swashplate inputs and a single body roll rate measurement is then designed. The controller design is based on a linear estimator in conjunction with optimal feedback gains, and the design is done in the frequency domain using the Loop Transfer Recovery method. The controller is shown to suppress the air resonance instability throughout wide range helicopter loading conditions and forward flight speeds.

  5. A Simple Attitude Control of Quadrotor Helicopter Based on Ziegler-Nichols Rules for Tuning PD Parameters

    Directory of Open Access Journals (Sweden)

    ZeFang He

    2014-01-01

    Full Text Available An attitude control strategy based on Ziegler-Nichols rules for tuning PD (proportional-derivative parameters of quadrotor helicopters is presented to solve the problem that quadrotor tends to be instable. This problem is caused by the narrow definition domain of attitude angles of quadrotor helicopters. The proposed controller is nonlinear and consists of a linear part and a nonlinear part. The linear part is a PD controller with PD parameters tuned by Ziegler-Nichols rules and acts on the quadrotor decoupled linear system after feedback linearization; the nonlinear part is a feedback linearization item which converts a nonlinear system into a linear system. It can be seen from the simulation results that the attitude controller proposed in this paper is highly robust, and its control effect is better than the other two nonlinear controllers. The nonlinear parts of the other two nonlinear controllers are the same as the attitude controller proposed in this paper. The linear part involves a PID (proportional-integral-derivative controller with the PID controller parameters tuned by Ziegler-Nichols rules and a PD controller with the PD controller parameters tuned by GA (genetic algorithms. Moreover, this attitude controller is simple and easy to implement.

  6. A simple attitude control of quadrotor helicopter based on Ziegler-Nichols rules for tuning PD parameters.

    Science.gov (United States)

    He, ZeFang; Zhao, Long

    2014-01-01

    An attitude control strategy based on Ziegler-Nichols rules for tuning PD (proportional-derivative) parameters of quadrotor helicopters is presented to solve the problem that quadrotor tends to be instable. This problem is caused by the narrow definition domain of attitude angles of quadrotor helicopters. The proposed controller is nonlinear and consists of a linear part and a nonlinear part. The linear part is a PD controller with PD parameters tuned by Ziegler-Nichols rules and acts on the quadrotor decoupled linear system after feedback linearization; the nonlinear part is a feedback linearization item which converts a nonlinear system into a linear system. It can be seen from the simulation results that the attitude controller proposed in this paper is highly robust, and its control effect is better than the other two nonlinear controllers. The nonlinear parts of the other two nonlinear controllers are the same as the attitude controller proposed in this paper. The linear part involves a PID (proportional-integral-derivative) controller with the PID controller parameters tuned by Ziegler-Nichols rules and a PD controller with the PD controller parameters tuned by GA (genetic algorithms). Moreover, this attitude controller is simple and easy to implement.

  7. Development of a vision-based ground target detection and tracking system for a small unmanned helicopter

    Institute of Scientific and Technical Information of China (English)

    LIN Feng; LUM Kai-Yew; CHEN Ben M.; LEE Tong H

    2009-01-01

    It is undoubted that the latest trend in the unmanned aerial vehicles (UAVs) community is towards visionbased unmanned small-scale helicopter,utilizing the maneuvering capabilities of the helicopter and the rich information of visual sensors,in order to arrive at a versatile platform for a variety of applications such as navigation,surveillance,tracking,etc.In this paper,we present the development of a visionbased ground target detection and tracking system for a small UAV helicopter.More specifically,we propose a real-time vision algorithm,based on moment invariants and two-stage pattern recognition,to achieve automatic ground target detection.In the proposed algorithm,the key geometry features of the target are extracted to detect and identify the target.Simultaneously,a Kalman filter is used to estimate and predict the position of the target,referred to as dynamic features,based on its motion model.These dynamic features are then combined with geometry features to identify the target in the second-stage of pattern recognition,when geometry features of the target change significantly due to noise and disturbance in the environment.Once the target is identified,an automatic control scheme is utilized to control the pan/tilt visual mechanism mounted on the helicopter such that the identified target is to be tracked at the center of the captured images.Experimental results based on images captured by the small-scale unmanned helicopter,SheLion,in actual flight tests demonstrate the effectiveness and robustness of the overall system.

  8. General model and control of an n rotor helicopter

    Science.gov (United States)

    Sidea, A. G.; Yding Brogaard, R.; Andersen, N. A.; Ravn, O.

    2014-12-01

    The purpose of this study was to create a dynamic, nonlinear mathematical model of a multirotor that would be valid for different numbers of rotors. Furthermore, a set of Single Input Single Output (SISO) controllers were implemented for attitude control. Both model and controllers were tested experimentally on a quadcopter. Using the combined model and controllers, simple system simulation and control is possible, by replacing the physical values for the individual systems.

  9. A New Optimal Control Algorithm for Quad-rotor Helicopter with State Constraints via Sliding-mode Control

    Directory of Open Access Journals (Sweden)

    Zhao Jing

    2015-01-01

    Full Text Available This paper proposes a strategy of a new optimal sliding-mode control for flight control system with state constraints so that the system guarantees the optimal performance index. Besides, the strategy ensures strong robustness to the internal parametric uncertainty and the external disturbances. In order to have fast transient response speed as well as good tracking accuracy, the integral of the time multiplied by the absolute displacement tracking error is introduced as the performance index. By analyzing the state constraints which are specifically the velocity tracking error constraint and the acceleration tracking error constraint, and the performance index, the parameters of sliding-mode surface and control law are obtained. Finally, the authors conduct the semi physical simulation on Qball-X4 quad-rotor helicopter, showing the effectiveness of the proposed strategy.

  10. Maximum acceptable inherent buoyancy limit for aircrew/passenger helicopter immersion suit systems.

    Science.gov (United States)

    Brooks, C J

    1988-12-01

    Helicopter crew and passengers flying over cold water wear immersion suits to provide hypothermic protection in case of ditching in cold water. The suits and linings have trapped air in the material to provide the necessary insulation and are thus very buoyant. By paradox, this buoyancy may be too much for a survivor to overcome in escaping from the cabin of a rapidly sinking inverted helicopter. The Canadian General Standard Board requested that research be conducted to investigate what should be the maximum inherent buoyancy in an immersion suit that would not inhibit escape, yet would provide adequate thermal insulation. This experiment reports on 12 subjects who safely escaped with 146N (33 lbf) of added buoyancy from a helicopter underwater escape trainer. It discusses the logic for and recommendation that the inherent buoyancy in a helicopter crew/passenger immersion suit system should not exceed this figure.

  11. Black Hawk Down?: Establishing Helicopter Parenting as a Distinct Construct from Other Forms of Parental Control during Emerging Adulthood

    Science.gov (United States)

    Padilla-Walker, Laura M.; Nelson, Larry J.

    2012-01-01

    The purpose of the current study was to establish a measure of helicopter parenting that was distinct from other forms of parental control, and to examine parental and behavioral correlates of helicopter parenting. Participants included 438 undergraduate students from four universities in the United States (M[subscript age] = 19.65, SD = 2.00,…

  12. Optimal Trajectories and Control Strategies for the Helicopter in One-Engine-Inoperative Terminal-Area Operations

    Science.gov (United States)

    Chen, Robert T. N.; Zhao, Yi-Yuan; Aiken, Edwin W. (Technical Monitor)

    1995-01-01

    Engine failure represents a major safety concern to helicopter operations, especially in the critical flight phases of takeoff and landing from/to small, confined areas. As a result, the JAA and FAA both certificate a transport helicopter as either Category-A or Category-B according to the ability to continue its operations following engine failures. A Category-B helicopter must be able to land safely in the event of one or all engine failures. There is no requirement, however, for continued flight capability. In contrast, Category-A certification, which applies to multi-engine transport helicopters with independent engine systems, requires that they continue the flight with one engine inoperative (OEI). These stringent requirements, while permitting its operations from rooftops and oil rigs and flight to areas where no emergency landing sites are available, restrict the payload of a Category-A transport helicopter to a value safe for continued flight as well as for landing with one engine inoperative. The current certification process involves extensive flight tests, which are potentially dangerous, costly, and time consuming. These tests require the pilot to simulate engine failures at increasingly critical conditions, Flight manuals based on these tests tend to provide very conservative recommendations with regard to maximum takeoff weight or required runway length. There are very few theoretical studies on this subject to identify the fundamental parameters and tradeoff factors involved. Furthermore, a capability for real-time generation of OEI optimal trajectories is very desirable for providing timely cockpit display guidance to assist the pilot in reducing his workload and to increase safety in a consistent and reliable manner. A joint research program involving NASA Ames Research Center, the FAA, and the University of Minnesota is being conducted to determine OEI optimal control strategies and the associated optimal,trajectories for continued takeoff (CTO

  13. Lead-Lag Control for Helicopter Vibration and Noise Reduction

    Science.gov (United States)

    Gandhi, Farhan

    1995-01-01

    As a helicopter transitions from hover to forward flight, the main rotor blades experience an asymmetry in flow field around the azimuth, with the blade section tangential velocities increasing on the advancing side and decreasing on the retreating side. To compensate for the reduced dynamic pressure on the retreating side, the blade pitch angles over this part of the rotor disk are increased. Eventually, a high enough forward speed is attained to produce compressibility effects on the advancing side of the rotor disk and stall on the retreating side. The onset of these two phenomena drastically increases the rotor vibratory loads and power requirements, thereby effectively establishing a limit on the maximum achievable forward speed. The alleviation of compressibility and stall (and the associated decrease in vibratory loads and power) would potentially result in an increased maximum forward speed. In the past, several methods have been examined and implemented to reduce the vibratory hub loads. Some of these methods are aimed specifically at alleviating vibration at very high flight speeds and increasing the maximum flight speed, while others focus on vibration reduction within the conventional flight envelope. Among the later are several types passive as well as active schemes. Passive schemes include a variety of vibration absorbers such as mechanical springs, pendulums, and bifilar absorbers. These mechanism are easy to design and maintain, but incur significant weight and drag penalties. Among the popular active control schemes in consideration are Higher Harmonic Control (HHC) and Individual Blade Control (IBC). HHC uses a conventional swash plate to generate a multi-cyclic pitch input to the blade. This requires actuators capable of sufficiently high power and bandwidth, increasing the cost and weight of the aircraft. IBC places actuators in the rotating reference frame, requiring the use of slip rings capable of transferring enough power to the actuators

  14. A New Hybrid Control Architecture to Attenuate Large Horizontal Wind Disturbance for a Small-Scale Unmanned Helicopter

    Directory of Open Access Journals (Sweden)

    Xiaorui Zhu

    2012-07-01

    Full Text Available This paper presents a novel method to attenuate large horizontal wind disturbance for a small‐scale unmanned autonomous helicopter combining wind tunnel‐based experimental data and a backstepping algorithm. Large horizontal wind disturbance is harmful to autonomous helicopters, especially to small ones because of their low inertia and the high cross‐coupling effects among the multiple inputs. In order to achieve more accurate and faster attenuation of large wind disturbance, a new hybrid control architecture is proposed to take advantage of the direct force/moment compensation based on the wind tunnel experimental data. In this architecture, large horizontal wind disturbance is treated as an additional input to the control system instead of a small perturbation around the equilibrium state. A backstepping algorithm is then designed to guarantee the stable convergence of the helicopter to the desired position. The proposed technique is finally evaluated in simulation on the platform, HIROBO Eagle, compared with a traditional wind velocity compensation method.

  15. Controllability Analysis for Multirotor Helicopter Rotor Degradation and Failure

    Science.gov (United States)

    Du, Guang-Xun; Quan, Quan; Yang, Binxian; Cai, Kai-Yuan

    2015-05-01

    This paper considers the controllability analysis problem for a class of multirotor systems subject to rotor failure/wear. It is shown that classical controllability theories of linear systems are not sufficient to test the controllability of the considered multirotors. Owing to this, an easy-to-use measurement index is introduced to assess the available control authority. Based on it, a new necessary and sufficient condition for the controllability of multirotors is derived. Furthermore, a controllability test procedure is approached. The proposed controllability test method is applied to a class of hexacopters with different rotor configurations and different rotor efficiency parameters to show its effectiveness. The analysis results show that hexacopters with different rotor configurations have different fault-tolerant capabilities. It is therefore necessary to test the controllability of the multirotors before any fault-tolerant control strategies are employed.

  16. General model and control of an n rotor helicopter

    OpenAIRE

    2015-01-01

    The purpose of this study was to create a dynamic, nonlinear mathematical model ofa multirotor that would be valid for different numbers of rotors. Furthermore, a set of SingleInput Single Output (SISO) controllers were implemented for attitude control. Both model andcontrollers were tested experimentally on a quadcopter. Using the combined model andcontrollers, simple system simulation and control is possible, by replacing the physical valuesfor the individual systems.

  17. Modeling and Backstepping-based Nonlinear Control Strategy for a 6 DOF Quadrotor Helicopter

    Institute of Scientific and Technical Information of China (English)

    Ashfaq Ahmad Mian; Wang Daobo

    2008-01-01

    In this article,a nonlinear model of an underactuated six degrees of freedom (6 DOF) quadrotor helicopter is derived on the basis of the Newton-Euler formalism.The derivation comprises determining equations of the motion of the quadrotor in three dimensions andapproximating the actuation forces through the modeling of aerodynamic coefficients and electric motor dynamics.The derived modelcomposed of translatioual and rotational subsystems is dynamically unstable,so a sequential nonlinear control strategy is used.The con-trol strategy includes feedback linearization coupled with a PD controller for the translational subsystem and a backstepping-based PID nonlinear controller for the rotational subsystem of the quadrotor.The performances of the nonlinear control method are evaluated by nonlinear simulation and the results demonstrate the effectiveness of the proposed control strategy for the quadrotor helicopter inquasi-stationary flights.

  18. Vibration reduction in helicopter rotors using an active control surface located on the blade

    Science.gov (United States)

    Millott, T. A.; Friedmann, P. P.

    1992-01-01

    A feasibility study of vibration reduction in a four-bladed helicopter rotor using individual blade control (IBC), which is implemented by an individually controlled aerodynamic surface located on each blade, is presented. For this exploratory study, a simple offset-hinged spring restrained model of the blade is used with fully coupled flap-lag-torsional dynamics for each blade. Deterministic controllers based on local and global system models are implemented to reduce 4/rev hub loads using both an actively controlled aerodynamic surface on each blade as well as conventional IBC, where the complete blade undergoes cyclic pitch change. The effectiveness of the two approaches for simultaneous reduction of the 4/rev hub shears and hub moments is compared. Conventional IBC requires considerably more power to achieve approximately the same level of vibration reduction as that obtained by implementing IBC using an active control surface located on the outboard segment of the blade. The effect of blade torsional flexibility on the vibration reduction effectiveness of the actively controlled surface was also considered and it was found that this parameter has a very substantial influence.

  19. DISCUSSION AND PRACTICAL ASPECTS ON CONTROL ALLOCATION FOR A MULTI-ROTOR HELICOPTER

    Directory of Open Access Journals (Sweden)

    G. J. J. Ducard

    2012-09-01

    Full Text Available This paper presents practical methods to improve the flight performance of an unmanned multi-rotor helicopter by using an efficient control allocation strategy. The flying vehicle considered is an hexacopter. It is indeed particularly suited for long missions and for carrying a significant payload such as all the sensors needed in the context of cartography, photogrammetry, inspection, surveillance and transportation. Moreover, a stable flight is often required for precise data recording during the mission. Therefore, a high performance flight control system is required to operate the UAV. However, the flight performance of a multi-rotor vehicle is tightly dependent on the control allocation strategy that is used to map the virtual control vector v = [T, L, M, N ]T composed of the thrust and the torques in roll, pitch and yaw, respectively, to the propellers' speed. This paper shows that a control allocation strategy based on the classical approach of pseudo-inverse matrix only exploits a limited range of the vehicle capabilities to generate thrust and moments. Thus, in this paper, a novel approach is presented, which is based on a weighted pseudo-inverse matrix method capable of exploiting a much larger domain in v. The proposed control allocation algorithm is designed with explicit laws for fast operation and low computational load, suitable for a small microcontroller with limited floating-point operation capability.

  20. Vibration reduction in helicopter rotors using an active control surface located on the blade

    Science.gov (United States)

    Millott, T. A.; Friedmann, P. P.

    1992-01-01

    A feasibility study of vibration reduction in a four-bladed helicopter rotor using individual blade control (IBC), which is implemented by an individually controlled aerodynamic surface located on each blade, is presented. For this exploratory study, a simple offset-hinged spring restrained model of the blade is used with fully coupled flap-lag-torsional dynamics for each blade. Deterministic controllers based on local and global system models are implemented to reduce 4/rev hub loads using both an actively controlled aerodynamic surface on each blade as well as conventional IBC, where the complete blade undergoes cyclic pitch change. The effectiveness of the two approaches for simultaneous reduction of the 4/rev hub shears and hub moments is compared. Conventional IBC requires considerably more power to achieve approximately the same level of vibration reduction as that obtained by implementing IBC using an active control surface located on the outboard segment of the blade. The effect of blade torsional flexibility on the vibration reduction effectiveness of the actively controlled surface was also considered and it was found that this parameter has a very substantial influence.

  1. Proposed Wind Turbine Aeroelasticity Studies Using Helicopter Systems Analysis

    Science.gov (United States)

    Ladkany, Samaan G.

    1998-01-01

    Advanced systems for the analysis of rotary wing aeroelastic structures (helicopters) are being developed at NASA Ames by the Rotorcraft Aeromechanics Branch, ARA. The research has recently been extended to the study of wind turbines, used for electric power generation Wind turbines play an important role in Europe, Japan & many other countries because they are non polluting & use a renewable source of energy. European countries such as Holland, Norway & France have been the world leaders in the design & manufacture of wind turbines due to their historical experience of several centuries, in building complex wind mill structures, which were used in water pumping, grain grinding & for lumbering. Fossil fuel cost in Japan & in Europe is two to three times higher than in the USA due to very high import taxes. High fuel cost combined with substantial governmental subsidies, allow wind generated power to be competitive with the more traditional sources of power generation. In the USA, the use of wind energy has been limited mainly because power production from wind is twice as expensive as from other traditional sources. Studies conducted at the National Renewable Energy Laboratories (NREL) indicate that the main cost in the production of wind turbines is due to the materials & the labor intensive processes used in the construction of turbine structures. Thus, for the US to assume world leadership in wind power generation, new lightweight & consequently very flexible wind turbines, that could be economically mass produced, would have to be developed [4,5]. This effort, if successful, would result in great benefit to the US & the developing nations that suffer from overpopulation & a very high cost of energy.

  2. Presidential Helicopter Acquisition: Program Established Knowledge-Based Business Case and Entered System Development with Plans for Managing Challenges

    Science.gov (United States)

    2015-04-14

    Presidential Helicopter Acquisition: Program Established Knowledge-Based Business Case and Entered System Development with Plans for Managing Challenges ...Acquisition Reform Act of 2009 (WSARA), This report discusses the cost, schedule, and performance status of the program, challenges it will face in...Presidential Helicopter Acquisition: Program Established Knowledge-Based Business Case and Entered System Development with Plans for Managing

  3. Minor Component Analysis-based Landing Forecast System for Ship-borne Helicopter

    Institute of Scientific and Technical Information of China (English)

    ZHOU Bo,; SHI Ai-guo; WAN Lin; YANG Bao-zhang

    2005-01-01

    The general structure of ship-borne helicopter landing forecast system is presented, and a novel ship motion prediction model based on minor component analysis (MCA) is built up to improve the forecast effectiveness. To validate the feasibility of this landing forecast system, time series for the roll, pitch and heave are generated by simulation and then forecasted based on MCA. Simulation results show that ship-borne helicopters can land safely in higher sea condition while carrying on rescue or replenishment tasks at sea in terms of the landing forecast system.

  4. Hearing loss in civilian airline and helicopter pilots compared to air traffic control personnel.

    Science.gov (United States)

    Wagstaff, Anthony S; Arva, Per

    2009-10-01

    In order to investigate possible hearing loss as a consequence of aviation noise, a comparative analysis of audiometric data from Norwegian Air Traffic Control (ATC) personnel, airline (fixed-wing) pilots, and helicopter pilots was performed. The results may be of use in giving advice regarding preventive measures. Male ATC, airline, and helicopter pilots were selected randomly from the Civil Aviation Authority (CAA) medical files. There were 182 subjects included in the study: 50, 81, and 51 subjects for ATC, helicopter, and airline pilots, respectively. Two audiograms with a 2-3-yr interval were analyzed for each individual. Age correction was performed using data from ISO 7129. Threshold changes per year for the frequencies 3, 4, and 6 kHz were examined in particular after age correction. For all three groups, mean hearing threshold levels were above (worse than) ISO 7129 predictions for most frequencies. As expected, hearing thresholds increased with age in the group as a whole. Looking at the 3-, 4-, and 6-kHz frequencies in particular, all groups had small but highly significant increases in hearing thresholds at 4 kHz between the first and second audiogram. The mean hearing thresholds for this group of aviation personnel are higher than International Standard ISO-7129 would predict according to age. Highly significant changes in hearing threshold after age correction, indicating possible noise-induced hearing loss, were found in all groups at 4 kHz. The fact that helicopter pilots had similar hearing loss to their other aviation colleagues indicates that current hearing protection for these pilots is effective in counteracting the increased noise levels in helicopters.

  5. Impact of a physician-staffed helicopter on a regional trauma system

    DEFF Research Database (Denmark)

    Hesselfeldt, R; Steinmetz, J; Jans, H

    2013-01-01

    This study aims to compare the trauma system before and after implementing a physician-staffed helicopter emergency medical service (PS-HEMS). Our hypothesis was that PS-HEMS would reduce time from injury to definitive care for severely injured patients.......This study aims to compare the trauma system before and after implementing a physician-staffed helicopter emergency medical service (PS-HEMS). Our hypothesis was that PS-HEMS would reduce time from injury to definitive care for severely injured patients....

  6. Decentralized PID neural network control for a quadrotor helicopter subjected to wind disturbance

    Institute of Scientific and Technical Information of China (English)

    陈彦民; 何勇灵; 周岷峰

    2015-01-01

    A decentralized PID neural network (PIDNN) control scheme was proposed to a quadrotor helicopter subjected to wind disturbance. First, the dynamic model that considered the effect of wind disturbance was established via Newton−Euler formalism. For quadrotor helicopter flying at low altitude in actual situation, it was more susceptible to be influenced by the turbulent wind field. Therefore, the turbulent wind field was generated according to Dryden model and taken into consideration as the disturbance source of quadrotor helicopter. Then, a nested loop control approach was proposed for the stabilization and navigation problems of the quadrotor subjected to wind disturbance. A decentralized PIDNN controller was designed for the inner loop to stabilize the attitude angle. A conventional PID controller was used for the outer loop in order to generate the reference path to inner loop. Moreover, the connective weights of the PIDNN were trained on-line by error back-propagation method. Furthermore, the initial connective weights were identified according to the principle of PID control theory and the appropriate learning rate was selected by discrete Lyapunov theory in order to ensure the stability. Finally, the simulation results demonstrate that the controller can effectively resist external wind disturbances, and presents good stability, maneuverability and robustness.

  7. Identification of stability and control derivatives for AS 355 L2 helicopter with Quad-M/CTA methodology

    Science.gov (United States)

    de Oliveira, Sérgio Servilha; Menegaldo, Luciano Luporini

    2012-11-01

    This work presents results obtained from a study of case for H-55 Helicopter System Identification which was carried out by an implementation of Quad-M Methodology purposed for Jategaonkar. The implementation performed was based on Cruz et al whose works were developed in Centro Técnico Aeroespacial (CTA). A comparison between Stability and Control Derivatives tables from these results and those from literature is performed for some important flight conditions. This comparison allows us to conclude about the reliability of the method, to present preliminary SCD tables for the studied aircraft and point to possible future works.

  8. Vibration reduction in helicopter rotors using an actively controlled partial span trailing edge flap located on the blade

    Science.gov (United States)

    Millott, T. A.; Friedmann, P. P.

    1994-01-01

    This report describes an analytical study of vibration reduction in a four-bladed helicopter rotor using an actively controlled, partial span, trailing edge flap located on the blade. The vibration reduction produced by the actively controlled flap (ACF) is compared with that obtained using individual blade control (IBC), in which the entire blade is oscillated in pitch. For both cases a deterministic feedback controller is implemented to reduce the 4/rev hub loads. For all cases considered, the ACF produced vibration reduction comparable with that obtained using IBC, but consumed only 10-30% of the power required to implement IBC. A careful parametric study is conducted to determine the influence of blade torsional stiffness, spanwise location of the control flap, and hinge moment correction on the vibration reduction characteristics of the ACF. The results clearly demonstrate the feasibility of this new approach to vibration reduction. It should be emphasized than the ACF, used together with a conventional swashplate, is completely decoupled from the primary flight control system and thus it has no influence on the airworthiness of the helicopter. This attribute is potentially a significant advantage when compared to IBC.

  9. Less Conservative Optimal Robust Control of a 3-DOF Helicopter

    Directory of Open Access Journals (Sweden)

    L. F. S. Buzachero

    2015-01-01

    Full Text Available This work proposes an improved technique for design and optimization of robust controllers norm for uncertain linear systems, with state feedback, including the possibility of time-varying the uncertainty. The synthesis techniques used are based on LMIs (linear matrix inequalities formulated on the basis of Lyapunov’s stability theory, using Finsler’s lemma. The design has used the addition of the decay rate restriction, including a parameter γ in the LMIs, responsible for decreasing the settling time of the feedback system. Qualitative and quantitative comparisons were made between methods of synthesis and optimization of the robust controllers norm, seeking alternatives with lower cost and better performance that meet the design restrictions. A practical application illustrates the efficiency of the proposed method with a failure purposely inserted in the system.

  10. The helicopter - some ergonomic factors.

    Science.gov (United States)

    Lovesey, E J

    1975-09-01

    Helicopter pilots are some of the hardest working human operators, because of the machine's inherant instability and control problems. This article covers some aspects where ergonomists might help to improve the overall system. After considering basic differences between helicopters and fixed wing aircraft, the author examines controls, where there are prospects of using miniature hand levers; cockpit vision and displays with particular reference to night and instrument flying; seating and vibration where the effects of protective clothing and harnesses are considered; and cabin noise from the engine, transmission and intercom systems. Finally, he assesses pilot activity using cine film techniques for different types of flight.

  11. Multicriteria Gain Tuning for Rotorcraft Flight Controls (also entitled The Development of the Conduit Advanced Control System Design and Evaluation Interface with a Case Study Application Fly by Wire Helicopter Design)

    Science.gov (United States)

    Biezad, Daniel

    1997-01-01

    Handling qualities analysis and control law design would seem to be naturally complimenting components of aircraft flight control system design, however these two closely coupled disciplines are often not well integrated in practice. Handling qualities engineers and control system engineers may work in separate groups within an aircraft company. Flight control system engineers and handling quality specialists may come from different backgrounds and schooling and are often not aware of the other group's research. Thus while the handling qualities specifications represent desired aircraft response characteristics, these are rarely incorporated directly in the control system design process. Instead modem control system design techniques are based on servo-loop robustness specifications, and simple representations of the desired control response. Comprehensive handling qualities analysis is often left until the end of the design cycle and performed as a check of the completed design for satisfactory performance. This can lead to costly redesign or less than satisfactory aircraft handling qualities when the flight testing phase is reached. The desire to integrate the fields of handling qualities and flight,control systems led to the development of the CONDUIT system. This tool facilitates control system designs that achieve desired handling quality requirements and servo-loop specifications in a single design process. With CONDUIT, the control system engineer is now able to directly design and control systems to meet the complete handling specifications. CONDUIT allows the designer to retain a preferred control law structure, but then tunes the system parameters to meet the handling quality requirements.

  12. A simple active controller to suppress helicopter air resonance in hover and forward flight

    Science.gov (United States)

    Friedmann, P. P.; Takahashi, M. D.

    1989-01-01

    A coupled rotor/fuselage helicopter analysis with the important effects of blade torsional flexibility, unsteady aerodynamics, and forward flight is presented. This model is used to illustrate the effect of unsteady aerodynamics, forward flight, and torsional flexibility on air resonance. Next, a nominal configuration, which experiences air resonance in forward flight, is selected. A simple multivariable compensator using conventional swashplate inputs and a single body roll rate measurement is then designed. The controller design is based on a linear estimator in conjunction with optimal feedback gains, and the design is done in the frequency domain using the loop-transfer recovery method. The controller is shown to suppress the air resonance instability throughout wide range helicopter loading conditions and forward flight speeds.

  13. 78 FR 65180 - Airworthiness Directives; MD Helicopters, Inc., Helicopters

    Science.gov (United States)

    2013-10-31

    ... condition, vibration, loss of tail rotor pitch control, and loss of directional control of the helicopter...-047-AD; Amendment 39-17606; AD 2013-19-24] RIN 2120-AA64 Airworthiness Directives; MD Helicopters, Inc., Helicopters AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: We...

  14. Velocity-Aided Attitude Estimation for Helicopter Aircraft Using Microelectromechanical System Inertial-Measurement Units

    Directory of Open Access Journals (Sweden)

    Sang Cheol Lee

    2016-12-01

    Full Text Available This paper presents an algorithm for velocity-aided attitude estimation for helicopter aircraft using a microelectromechanical system inertial-measurement unit. In general, high- performance gyroscopes are used for estimating the attitude of a helicopter, but this type of sensor is very expensive. When designing a cost-effective attitude system, attitude can be estimated by fusing a low cost accelerometer and a gyro, but the disadvantage of this method is its relatively low accuracy. The accelerometer output includes a component that occurs primarily as the aircraft turns, as well as the gravitational acceleration. When estimating attitude, the accelerometer measurement terms other than gravitational ones can be considered as disturbances. Therefore, errors increase in accordance with the flight dynamics. The proposed algorithm is designed for using velocity as an aid for high accuracy at low cost. It effectively eliminates the disturbances of accelerometer measurements using the airspeed. The algorithm was verified using helicopter experimental data. The algorithm performance was confirmed through a comparison with an attitude estimate obtained from an attitude heading reference system based on a high accuracy optic gyro, which was employed as core attitude equipment in the helicopter.

  15. 33 CFR 149.419 - Can the water supply for the helicopter deck fire protection system be part of a fire water system?

    Science.gov (United States)

    2010-07-01

    ... helicopter deck fire protection system be part of a fire water system? 149.419 Section 149.419 Navigation and... § 149.421 may be part of: (1) The fire water system, installed in accordance with Mineral Management... § 149.419 Can the water supply for the helicopter deck fire protection system be part of a fire...

  16. Flight Testing and Real-Time System Identification Analysis of a UH-60A Black Hawk Helicopter with an Instrumented External Sling Load

    Science.gov (United States)

    McCoy, Allen H.

    1998-01-01

    Helicopter external air transportation plays an important role in today's world. For both military and civilian helicopters, external sling load operations offer an efficient and expedient method of handling heavy, oversized cargo. With the ability to reach areas otherwise inaccessible by ground transportation, helicopter external load operations are conducted in industries such as logging, construction, and fire fighting, as well as in support of military tactical transport missions. Historically, helicopter and load combinations have been qualified through flight testing, requiring considerable time and cost. With advancements in simulation and flight test techniques there is potential to substantially reduce costs and increase the safety of helicopter sling load certification. Validated simulation tools make possible accurate prediction of operational flight characteristics before initial flight tests. Real time analysis of test data improves the safety and efficiency of the testing programs. To advance these concepts, the U.S. Army and NASA, in cooperation with the Israeli Air Force and Technion, under a Memorandum of Agreement, seek to develop and validate a numerical model of the UH-60 with sling load and demonstrate a method of near real time flight test analysis. This thesis presents results from flight tests of a U.S. Army Black Hawk helicopter with various external loads. Tests were conducted as the U.S. first phase of this MOA task. The primary load was a container express box (CONEX) which contained a compact instrumentation package. The flights covered the airspeed range from hover to 70 knots. Primary maneuvers were pitch and roll frequency sweeps, steps, and doublets. Results of the test determined the effect of the suspended load on both the aircraft's handling qualities and its control system's stability margins. Included were calculations of the stability characteristics of the load's pendular motion. Utilizing CIFER(R) software, a method for near

  17. Missile Captive Carry Monitoring and Helicopter Identification Using a Capacitive Microelectromechanical Systems Accelerometer

    Energy Technology Data Exchange (ETDEWEB)

    Hatchell, Brian K.; Mauss, Fredrick J.; Amaya, Ivan A.; Skorpik, James R.; Silvers, Kurt L.; Marotta, Steve

    2012-03-27

    Military missiles are exposed to many sources of mechanical vibration that can affect system reliability, safety, and mission effectiveness. The U. S. Army Aviation and Missile Research Development and Engineering Center (AMRDEC) has been developing missile health monitoring systems to assess and improve reliability, reduce life cycle costs, and increase system readiness. One of the most significant exposures to vibration occurs when the missile is being carried by a helicopter or other aviation platform, which is a condition known as captive carry. Recording the duration of captive carry exposure during the missile’s service life can enable the implementation of predictive maintenance and resource management programs. Since the vibration imparted by each class of helicopter varies in frequency and amplitude, tracking the vibration exposure from each helicopter separately can help quantify the severity and harmonic content of the exposure. Under the direction of AMRDEC staff, engineers at the Pacific Northwest National Laboratory have developed a Captive Carry Health Monitor (CCHM) for the Hellfire II missile. The CCHM is an embedded usage monitoring device installed on the outer skin of the Hellfire II missile to record the cumulative hours the host missile has been in captive carry mode. To classify the vibration by class of helicopter, the CCHM analyzes the amplitude and frequency content of the vibration with the Goertzel algorithm to detect the presence of distinctive rotor harmonics. Cumulative usage data are accessible in theater from an external display; monthly usage histograms are accessible through an internal download connector. This paper provides an overview of the CCHM electrical and package design, describes field testing and data analysis techniques used to monitor captive carry identify and the class of helicopter, and discusses the potential application of missile health and usage data for real-time reliability analysis and fleet management.

  18. Snow measurement system for airborne snow surveys (GPR system from helicopter) in high mountian areas.

    Science.gov (United States)

    Sorteberg, Hilleborg K.

    2010-05-01

    In the hydropower industry, it is important to have precise information about snow deposits at all times, to allow for effective planning and optimal use of the water. In Norway, it is common to measure snow density using a manual method, i.e. the depth and weight of the snow is measured. In recent years, radar measurements have been taken from snowmobiles; however, few energy supply companies use this method operatively - it has mostly been used in connection with research projects. Agder Energi is the first Norwegian power producer in using radar tecnology from helicopter in monitoring mountain snow levels. Measurement accuracy is crucial when obtaining input data for snow reservoir estimates. Radar screening by helicopter makes remote areas more easily accessible and provides larger quantities of data than traditional ground level measurement methods. In order to draw up a snow survey system, it is assumed as a basis that the snow distribution is influenced by vegetation, climate and topography. In order to take these factors into consideration, a snow survey system for fields in high mountain areas has been designed in which the data collection is carried out by following the lines of a grid system. The lines of this grid system is placed in order to effectively capture the distribution of elevation, x-coordinates, y-coordinates, aspect, slope and curvature in the field. Variation in climatic conditions are also captured better when using a grid, and dominant weather patterns will largely be captured in this measurement system.

  19. 78 FR 27867 - Airworthiness Directives; MD Helicopters Inc. Helicopters

    Science.gov (United States)

    2013-05-13

    ..., leading to vibration, loss of tail rotor pitch control, and subsequent loss of tail rotor and helicopter... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; MD Helicopters Inc. Helicopters AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking...

  20. Helicopter Field Testing of NASA's Autonomous Landing and Hazard Avoidance Technology (ALHAT) System fully Integrated with the Morpheus Vertical Test Bed Avionics

    Science.gov (United States)

    Epp, Chirold D.; Robertson, Edward A.; Ruthishauser, David K.

    2013-01-01

    The Autonomous Landing and Hazard Avoidance Technology (ALHAT) Project was chartered to develop and mature to a Technology Readiness Level (TRL) of six an autonomous system combining guidance, navigation and control with real-time terrain sensing and recognition functions for crewed, cargo, and robotic planetary landing vehicles. The ALHAT System must be capable of identifying and avoiding surface hazards to enable a safe and accurate landing to within tens of meters of designated and certified landing sites anywhere on a planetary surface under any lighting conditions. This is accomplished with the core sensing functions of the ALHAT system: Terrain Relative Navigation (TRN), Hazard Detection and Avoidance (HDA), and Hazard Relative Navigation (HRN). The NASA plan for the ALHAT technology is to perform the TRL6 closed loop demonstration on the Morpheus Vertical Test Bed (VTB). The first Morpheus vehicle was lost in August of 2012 during free-flight testing at Kennedy Space Center (KSC), so the decision was made to perform a helicopter test of the integrated ALHAT System with the Morpheus avionics over the ALHAT planetary hazard field at KSC. The KSC helicopter tests included flight profiles approximating planetary approaches, with the entire ALHAT system interfaced with all appropriate Morpheus subsystems and operated in real-time. During these helicopter flights, the ALHAT system imaged the simulated lunar terrain constructed in FY2012 to support ALHAT/Morpheus testing at KSC. To the best of our knowledge, this represents the highest fidelity testing of a system of this kind to date. During this helicopter testing, two new Morpheus landers were under construction at the Johnson Space Center to support the objective of an integrated ALHAT/Morpheus free-flight demonstration. This paper provides an overview of this helicopter flight test activity, including results and lessons learned, and also provides an overview of recent integrated testing of ALHAT on the second

  1. System Research Of Multi-Barrel Machine Guns Installed On Board Of The Helicopter Of Mi-17 Type

    Directory of Open Access Journals (Sweden)

    Bęczkowski Grzegorz

    2015-08-01

    Full Text Available This article presents tests of a multi-barreled machine gun system built on board of a helicopter. The described weapon system consists of three 7.62 mm M-134G multi-barreled machine guns built on the designed frames of shooting positions located in the escape hatch window, the side doors and the rear doors of the transport cabin of the Mi-17-1V helicopter.

  2. General model and control of an n rotor helicopter

    DEFF Research Database (Denmark)

    Sidea, Adriana-Gabriela; Brogaard, Rune Yding; Andersen, Nils Axel

    2015-01-01

    The purpose of this study was to create a dynamic, nonlinear mathematical model ofa multirotor that would be valid for different numbers of rotors. Furthermore, a set of SingleInput Single Output (SISO) controllers were implemented for attitude control. Both model andcontrollers were tested exper...

  3. Adaptation of the Neural Network Recognition System of the Helicopter on Its Acoustic Radiation to the Flight Speed

    Directory of Open Access Journals (Sweden)

    V. K. Hohlov

    2015-01-01

    Full Text Available The article concerns the adaptation of a neural tract that recognizes a helicopter from the aerodynamic and ground objects by its acoustic radiation to the helicopter flight speed. It uses non-centered informative signs-indications of estimating signal spectra, which correspond to the local extremes (maximums and minimums of the power spectrum of input signal and have the greatest information when differentiating the helicopter signals from those of tracked vehicles. The article gives justification to the principle of the neural network (NN adaptation and adaptation block structure, which solves problems of blade passage frequency estimation when capturing the object and track it when tracking a target, as well as forming a signal to control the resonant filter parameters of the selection block of informative signs. To create the discriminatory characteristics of the discriminator are used autoregressive statistical characteristics of the quadrature components of signal, obtained through the discrete Hilbert Converter (DGC that perforMathematical modeling of the tracking meter using the helicopter signals obtained in real conditions is performed. The article gives estimates of the tracking parameter when using a tracking meter with DGC by sequential records of realized acoustic noise of the helicopter. It also shows a block-diagram of the adaptive NN. The scientific novelty of the work is that providing the invariance of used informative sign, the counts of local extremes of power spectral density (PSD to changes in the helicopter flight speed is reached due to adding the NN structure and adaptation block, which is implemented as a meter to track the apparent passage frequency of the helicopter rotor blades using its relationship with a function of the autoregressive acoustic signal of the helicopter.Specialized literature proposes solutions based on the use of training classifiers with different parametric methods of spectral representations

  4. Sensor selection of helicopter transmission systems based on physical model and sensitivity analysis

    Institute of Scientific and Technical Information of China (English)

    Lyu Kehong; Tan Xiaodong; Liu Guanjun; Zhao Chenxu

    2014-01-01

    In the helicopter transmission systems, it is important to monitor and track the tooth damage evolution using lots of sensors and detection methods. This paper develops a novel approach for sensor selection based on physical model and sensitivity analysis. Firstly, a physical model of tooth damage and mesh stiffness is built. Secondly, some effective condition indicators (CIs) are presented, and the optimal CIs set is selected by comparing their test statistics according to Mann-Kendall test. Afterwards, the selected CIs are used to generate a health indicator (HI) through sen slop estimator. Then, the sensors are selected according to the monotonic relevance and sensitivity to the damage levels. Finally, the proposed method is verified by the simulation and experimental data. The results show that the approach can provide a guide for health monitor-ing of helicopter transmission systems, and it is effective to reduce the test cost and improve the system’s reliability.

  5. Sensor selection of helicopter transmission systems based on physical model and sensitivity analysis

    Directory of Open Access Journals (Sweden)

    Lyu Kehong

    2014-06-01

    Full Text Available In the helicopter transmission systems, it is important to monitor and track the tooth damage evolution using lots of sensors and detection methods. This paper develops a novel approach for sensor selection based on physical model and sensitivity analysis. Firstly, a physical model of tooth damage and mesh stiffness is built. Secondly, some effective condition indicators (CIs are presented, and the optimal CIs set is selected by comparing their test statistics according to Mann–Kendall test. Afterwards, the selected CIs are used to generate a health indicator (HI through sen slop estimator. Then, the sensors are selected according to the monotonic relevance and sensitivity to the damage levels. Finally, the proposed method is verified by the simulation and experimental data. The results show that the approach can provide a guide for health monitoring of helicopter transmission systems, and it is effective to reduce the test cost and improve the system’s reliability.

  6. Development and evaluation of a helicopter-borne water-quality monitoring system

    Science.gov (United States)

    Wallace, J. W.; Jordan, R. A.; Flynn, J.; Thomas, R. W.

    1978-01-01

    A small, helicopter-borne water-quality monitoring package is being developed by the NASA/EPA using a combination of basic in situ water quality sensors and physical sample collector technology. The package is a lightweight system which can be carried and operated by one person as a passenger in a small helicopter typically available by rental at commercial airports. Real-time measurements are made by suspending the water quality monitoring package with a cable from the hovering helicopter. Designed primarily for use in rapidly assessing hazardous material spills in inland and coastal zone water bodies, the system can survey as many as 20 data stations up to 1.5 kilometers apart in 1 hour. The system provides several channels of sensor data and allows for the addition of future sensors. The system will also collect samples from selected sites with sample collection on command. An EPA Spill Response Team member can easily transport, deploy, and operate the water quality monitoring package to determine the distribution, movement, and concentration of the spilled material in the water body.

  7. A rotor-mounted digital instrumentation system for helicopter blade flight research measurements

    Science.gov (United States)

    Knight, V. H., Jr.; Haywood, W. S., Jr.; Williams, M. L.

    1978-01-01

    A rotor mounted flight instrumentation system developed for helicopter rotor blade research is described. The system utilizes high speed digital techniques to acquire research data from miniature pressure transducers on advanced rotor airfoils which are flight tested on an AH-1G helicopter. The system employs microelectronic pulse code modulation (PCM) multiplexer digitizer stations located remotely on the blade and in a hub mounted metal canister. As many as 25 sensors can be remotely digitized by a 2.5 mm thick electronics package mounted on the blade near the tip to reduce blade wiring. The electronics contained in the canister digitizes up to 16 sensors, formats these data with serial PCM data from the remote stations, and transmits the data from the canister which is above the plane of the rotor. Data are transmitted over an RF link to the ground for real time monitoring and to the helicopter fuselage for tape recording. The complete system is powered by batteries located in the canister and requires no slip rings on the rotor shaft.

  8. Time Periodic Control of a Multi-Blade Helicopter.

    Science.gov (United States)

    1988-05-01

    motion (13-22). Friedmann and Silverthorn (13) examined the flap-lag motion of a cantilevered rotor blade at arbitrary d, advance ratios. They concluded...Advance Ratio,* NASA SP-352: 25-34 (1974). 13. Friedmann, P. and L. J. Silverthorn . "Aeroelastic Stability of Periodic Systems with Applications to Rotor

  9. Effects of Control-Response Characteristics on the Capability of Helicopter for Use as a Gun Platform

    Science.gov (United States)

    Pegg, Robert J.; Connor, Andrew B.

    1960-01-01

    An investigation with a variable-stability helicopter was undertaken to ascertain the steadiness and ability to "hold on" to the target of a helicopter employed as a gun platform. Simulated tasks were per formed under differing flight conditions with the control-response characteristics of the helicopter varied for each task. The simulated gun-platform mission included: Variations of headings with respect to wind, constant altitude and "swing around" to a wind heading of 0 deg, and increases in altitude while performing a swing around to a wind heading of 0 deg. The results showed that increases in control power and damping increased pilot ability to hold on to the target with fewer yawing oscillations and in a shorter time. The results also indicated that wind direction must be considered in accuracy assessment. Greatest accuracy throughout these tests was achieved by aiming upwind.

  10. Swashplateless Helicopter Experimental Investigation: Primary Control with Trailing Edge Flaps Actuated with Piezobenders

    Science.gov (United States)

    Copp, Peter

    V/cm (limited by depoling). An undocumented phenomenon is found called bender relaxation where the benders lose over half of their initial DC stroke over time. While the bender stiffness is shown not to change with electric field, the DC stroke is significantly less than AC stroke. A two-bladed Mach-scale rotor is constructed with each blade containing 2 flaps each actuated by a single piezobender. Each flap is 26.5% chord and 14% span for a total of 28% span centered at 75% of the blade radius. Flap motion of greater than 10 degrees half peak-peak is obtained for all 4 flaps at 900 RPM on the hoverstand. So, the flaps show promise for the Mach-scale rotor speed of 2400 RPM. A PID loop is implemented for closed loop control of flap amplitude and mean position. On the hoverstand at 900 RPM, the swashplateless concept is demonstrated. The linear springs used to lower the torsional frequency are shown to have minimum friction during rotation. 1/rev blade pitching of +/-1 degree is achieved at a torsional frequency of 1.5/rev for each blade. At resonance, the blade pitching for each blade is greater than +/-4 degrees. Primary control is demonstrated by measuring hub forces and moments. At resonance state, the flaps in conjunction with the blade pitching provide +/-15 lbs of normal force at a mean lift of 15 lbs yielding +/-100% lift authority. Significant hub forces and moments are produced as well. For a production swashplateless helicopter, it may be prudent to eliminate the pitch links by reducing the blade structural stiffness. A novel wire sensor system network is proposed in order to measure blade elastic flap bending, lead-lag bending and torsion. The theory for measuring blade twist is rigorously derived. A blade is constructed with the wire sensor network and validated on the benchtop for blade elastic bending and twist. This work is a step forward in achieving a swashplateless rotor system. Not only would this reduce drag in high speed forward flight, but it would lead to

  11. Chaotic Artificial Bee Colony Algorithm for System Identification of a Small-Scale Unmanned Helicopter

    Directory of Open Access Journals (Sweden)

    Li Ding

    2015-01-01

    Full Text Available The purpose of this paper is devoted to developing a chaotic artificial bee colony algorithm (CABC for the system identification of a small-scale unmanned helicopter state-space model in hover condition. In order to avoid the premature of traditional artificial bee colony algorithm (ABC, which is stuck in local optimum and can not reach the global optimum, a novel chaotic operator with the characteristics of ergodicity and irregularity was introduced to enhance its performance. With input-output data collected from actual flight experiments, the identification results showed the superiority of CABC over the ABC and the genetic algorithm (GA. Simulations are presented to demonstrate the effectiveness of our proposed algorithm and the accuracy of the identified helicopter model.

  12. Input Shaping for Helicopter Slung Load Swing Reduction

    DEFF Research Database (Denmark)

    Bisgaard, Morten; la Cour-Harbo, Anders; Bendtsen, Jan Dimon

    2008-01-01

    This chapter presents a feedforward swing reducing control system for augmenting already existing helicopter controllers and enables slung load flight with autonomous helicopters general cargo transport. The feedforward controller is designed to avoid excitation of the lightly damped modes...... of the system by shaping the reference trajectory using robust input shaping. It is developed as part of an integrated adaptive control system consisting of state estimator, feedforward, and feedback controller capable of simultaneously preventing swing in the slung load from helicopter motion and actively...... dampen swing. Simulations and flight tests show the effectiveness of the input shaping applied to a small scale autonomous helicopter slung load system. Both simulations and flight verifications shows significant slung load swing reduction using the proposed trajectory shaping over over flight without...

  13. Novel controller design demonstration for vibration alleviation of helicopter rotor blades

    Science.gov (United States)

    Ulker, Fatma Demet; Nitzsche, Fred

    2012-04-01

    This paper presents an advanced controller design methodology for vibration alleviation of helicopter rotor sys- tems. Particularly, vibration alleviation in a forward ight regime where the rotor blades experience periodically varying aerodynamic loading was investigated. Controller synthesis was carried out under the time-periodic H2 and H∞ framework and the synthesis problem was solved based on both periodic Riccati and Linear Matrix Inequality (LMI) formulations. The closed-loop stability was analyzed using Floquet-Lyapunov theory, and the controller's performance was validated by closed-loop high-delity aeroelastic simulations. To validate the con- troller's performance an actively controlled trailing edge ap strategy was implemented. Computational cost was compared for both formulations.

  14. FLIR, NVG and HMS/D systems for helicopter operation: Review

    Science.gov (United States)

    Boehm, H. D. V.

    1985-12-01

    In the last decade, electro-optical systems have been used successfully in military and civil applications. They extend the scope of operation of ground vehicles, helicopters and fixed wing aircraft from daytime into nighttime, with a 24 hour readiness covering even bad weather conditions. The visual aids fall into two physical categories: the image intensifiers, which amplify reflected residual light in the near infrared and the thermal imager, which detect the thermal radiation of all bodies mainly in the 8 to 12 micrometer atmospheric window for bodies with T approx. 20 C. During the last five years, the investigator has carried out helicopter flight trials at night using examples of all these visionic aids (FLIR, LLLTV, NVG, HMS/D and Direct View Optics) for piloting and observation tasks. The detection, recognition and identification range of nine different FLIR were tested in ground and laboratory tests. The evaluation of an optical sensor platform location in the helicopter nose-, roof- and mast-mounted versions, the comparison of thermal and intensifier images and the NVG compatible cockpit were topics of the tests. The optical sensors are described with their limitations and some results of the trials are given, with regard to the pilot's stress situation and eye safety.

  15. Helicopter Controllability

    Science.gov (United States)

    1989-09-01

    which the root locus arrives at a complex poles (8A) is given by eA = 180* - arg GH (7-14) Arg GH is the phase angle of GH calculated at a complex...617247E+0(0 -1. 128784E-01 6. 239277E-02 1. 289744E-C𔃻 -208. 9313 1.081181E+01 -7. 775090E-02 5.346148E-02 9.435747E-02 -214.5124 1.215474E+01 -5

  16. Aircrew-aircraft integration issues in future US Army helicopters

    Science.gov (United States)

    Hartzell, E. J.; Aiken, E. W.; Voorhees, J. W.

    1984-01-01

    Some human factors research issues, the resolution of which will be vital to the successful operation of future military helicopters are reviewed. Understanding and reducing the helicopter pilot's workload is examined by a diverse program directed at answering some of the more fundamental questions relating to the transfer displays and interactions between pilot and automated systems. The results of three experimental studies which address the issues of display control compatibility, characteristics of integrated controllers, and voice systems are presented.

  17. Helicopter Human Factors

    Science.gov (United States)

    Hart, Sandra G.; Sridhar, Banavar (Technical Monitor)

    1995-01-01

    Even under optimal conditions, helicopter flight is a most demanding form of human-machine interaction, imposing continuous manual, visual, communications, and mental demands on pilots. It is made even more challenging by small margins for error created by the close proximity of terrain in NOE flight and missions flown at night and in low visibility. Although technology advances have satisfied some current and proposed requirements, hardware solutions alone are not sufficient to ensure acceptable system performance and pilot workload. However, human factors data needed to improve the design and use of helicopters lag behind advances in sensor, display, and control technology. Thus, it is difficult for designers to consider human capabilities and limitations when making design decisions. This results in costly accidents, design mistakes, unrealistic mission requirements, excessive training costs, and challenge human adaptability. NASA, in collaboration with DOD, industry, and academia, has initiated a program of research to develop scientific data bases and design principles to improve the pilot/vehicle interface, optimize training time and cost, and maintain pilot workload and system performance at an acceptable level. Work performed at Ames, and by other research laboratories, will be reviewed to summarize the most critical helicopter human factors problems and the results of research that has been performed to: (1) Quantify/model pilots use of visual cues for vehicle control; (2) Improve pilots' performance with helmet displays of thermal imagery and night vision goggles for situation awareness and vehicle control; (3) Model the processes by which pilots encode maps and compare them to the visual scene to develop perceptually and cognitively compatible electronic map formats; (4) Evaluate the use of spatially localized auditory displays for geographical orientation, target localization, radio frequency separation; (5) Develop and flight test control

  18. Helicopter Human Factors

    Science.gov (United States)

    Hart, Sandra G.; Sridhar, Banavar (Technical Monitor)

    1995-01-01

    Even under optimal conditions, helicopter flight is a most demanding form of human-machine interaction, imposing continuous manual, visual, communications, and mental demands on pilots. It is made even more challenging by small margins for error created by the close proximity of terrain in NOE flight and missions flown at night and in low visibility. Although technology advances have satisfied some current and proposed requirements, hardware solutions alone are not sufficient to ensure acceptable system performance and pilot workload. However, human factors data needed to improve the design and use of helicopters lag behind advances in sensor, display, and control technology. Thus, it is difficult for designers to consider human capabilities and limitations when making design decisions. This results in costly accidents, design mistakes, unrealistic mission requirements, excessive training costs, and challenge human adaptability. NASA, in collaboration with DOD, industry, and academia, has initiated a program of research to develop scientific data bases and design principles to improve the pilot/vehicle interface, optimize training time and cost, and maintain pilot workload and system performance at an acceptable level. Work performed at Ames, and by other research laboratories, will be reviewed to summarize the most critical helicopter human factors problems and the results of research that has been performed to: (1) Quantify/model pilots use of visual cues for vehicle control; (2) Improve pilots' performance with helmet displays of thermal imagery and night vision goggles for situation awareness and vehicle control; (3) Model the processes by which pilots encode maps and compare them to the visual scene to develop perceptually and cognitively compatible electronic map formats; (4) Evaluate the use of spatially localized auditory displays for geographical orientation, target localization, radio frequency separation; (5) Develop and flight test control

  19. Flight Parameter Display System For The Mi-17 Helicopter – Test Results

    Directory of Open Access Journals (Sweden)

    Bęczkowski Grzegorz

    2015-08-01

    Full Text Available This article presents flight tests of a newly developed Helmet-Mounted Flight Parameters Display System (SWPL. Presented system is designed to illustrate full piloting and navigational information, warning about emergency on the helicopter’s board and signaling on-board helicopter systems failures on the translucent display. The system is designed to work in day and night time conditions. In night time conditions, the system cooperates with night vision goggles applicable in Polish Air Force. The article presents the main components of the tested system, along with their purpose and function. It also describes in detail the methods of display implemented in the system and the amount of displayed information. The article discusses the required range and the actual course of the flight tests of that system. Tests were conducted on a Mi-17-1V helicopter. The results of the flight tests of the Helmet-Mounted Display System are given in conclusion, in particular regarding meeting the tactical and technical requirements of the system.

  20. Active Vibration Control for Helicopter Interior Noise Reduction Using Power Minimization

    Science.gov (United States)

    Mendoza, J.; Chevva, K.; Sun, F.; Blanc, A.; Kim, S. B.

    2014-01-01

    This report describes work performed by United Technologies Research Center (UTRC) for NASA Langley Research Center (LaRC) under Contract NNL11AA06C. The objective of this program is to develop technology to reduce helicopter interior noise resulting from multiple gear meshing frequencies. A novel active vibration control approach called Minimum Actuation Power (MAP) is developed. MAP is an optimal control strategy that minimizes the total input power into a structure by monitoring and varying the input power of controlling sources. MAP control was implemented without explicit knowledge of the phasing and magnitude of the excitation sources by driving the real part of the input power from the controlling sources to zero. It is shown that this occurs when the total mechanical input power from the excitation and controlling sources is a minimum. MAP theory is developed for multiple excitation sources with arbitrary relative phasing for single or multiple discrete frequencies and controlled by a single or multiple controlling sources. Simulations and experimental results demonstrate the feasibility of MAP for structural vibration reduction of a realistic rotorcraft interior structure. MAP control resulted in significant average global vibration reduction of a single frequency and multiple frequency excitations with one controlling actuator. Simulations also demonstrate the potential effectiveness of the observed vibration reductions on interior radiated noise.

  1. RESEARCH OF THE HIGH HARMONICS INDIVIDUAL BLADE CONTROL EFFECT ON VIBRATIONS CAUSED BY THE HELICOPTER MAIN ROTOR THRUST

    Directory of Open Access Journals (Sweden)

    2016-01-01

    Full Text Available The paper presents numerical results analysis of main rotor vibration due to helicopter main rotor thrust pulsation.The calculation method, the object of research and numerical research results with the aim to reduce the amplitude of the vibrations transmitted to the hub from the helicopters main rotor by the individual blade control in azimuth by the installation angle of blades cyclic changes are set out in the article. The individual blades control law for a five-blade main rotor based on the blade frequencies is made. It allows reducing the vibration from thrust. Research takes into account the main rotor including and excluding the blade flapping motion. The minimal vibrations regime is identified.Numerical study of variable loads caused by unsteady flow around the main rotor blades at high relative speeds of flight, which transmitted to the rotor hub, is made. The scheme of a thin lifting surface and the rotor vortex theory are used for simulation of the aerodynamic loads on blades. Non - uniform loads caused by the thrust, decomposed on the blade harmonic and its overtones. The largest values of deviation from the mean amplitude thrust are received. The analysis of variable loads with a traditional control system is made. Algorithms of higher harmonics individual blade control capable of reducing the thrust pulsation under the average value of thrust are developed.Numerical research shows that individual blade control of high harmonics reduces variable loads. The necessary change in the blade installation is about ± 0,2 degree that corresponds to the maximum displacement of the additional con- trol stick is about 1 mm.To receive the overall picture is necessary to consider all six components of forces and moments. Control law with own constants will obtained for each of them. It is supposed, that each of six individual blade control laws have an impact on other components. Thus, the problem reduces to the optimization issue. The

  2. Helicopter emergency medical services accident rates in different international air rescue systems

    Directory of Open Access Journals (Sweden)

    J Hinkelbein

    2010-04-01

    Full Text Available J Hinkelbein1,2, M Schwalbe2, H V Genzwuerker2,31Department for Anesthesiology and Intensive Care Medicine, University Hospital Cologne, Germany; 2Working Group “Emergency Medicine and Air Rescue”, German Society of Aviation and Space Medicine (DGRLM eV; 3Clinic of Anesthesiology and Intensive Care Medicine, Neckar-Odenwald-Kliniken gGmbH, Hospitals Buchen and Mosbach, Buchen, GermanyAim: Each year approximately two to four helicopter emergency medical services (HEMS crashes occur in Germany. The aim of the present study was to compare crash rates and fatal crash rates in Germany to rates in other countries.Materials and methods: A MEDLINE search from 1970 to 2009 was performed using combinations of the keywords “HEMS”, “rescue helicopter”, “accident”, “accident rate”, “crash”, and “crash rate”. The search was supplemented by additional published data. Data were compared on the basis of 10,000 missions and 100,000 helicopter flying hours. These data were allocated to specific time frames for analyis.Results: Eleven relevant studies were identified. Five studies (three from Germany, one from the US, one from Australia analyzing HEMS accidents on the basis of 10,000 missions were identified. Crash rates per 10,000 missions ranged between 0.4 and 3.05 and fatal crash rates between 0.04 and 2.12. In addition, nine studies (six from the US, two from Germany, one from Australia used 100,000 flying hours as a denominator. Here, crash rates ranged between 1.7 and 13.4 and fatal crash rates between 0.91 and 4.7.Conclusions: Data and accident rates were inhomogeneous and differed significantly. Data analysis was impeded by publication of mean data, use of different time frames, and differences in HEMS systems.Keywords: fatal accident rate, rescue helicopter, fatal crash rate, helicopter emergency medical system, accident analysis

  3. Flight evaluation of a computer aided low-altitude helicopter flight guidance system

    Science.gov (United States)

    Swenson, Harry N.; Jones, Raymond D.; Clark, Raymond

    1993-01-01

    The Flight Systems Development branch of the U.S. Army's Avionics Research and Development Activity (AVRADA) and NASA Ames Research Center have developed for flight testing a Computer Aided Low-Altitude Helicopter Flight (CALAHF) guidance system. The system includes a trajectory-generation algorithm which uses dynamic programming and a helmet-mounted display (HMD) presentation of a pathway-in-the-sky, a phantom aircraft, and flight-path vector/predictor guidance symbology. The trajectory-generation algorithm uses knowledge of the global mission requirements, a digital terrain map, aircraft performance capabilities, and precision navigation information to determine a trajectory between mission way points that seeks valleys to minimize threat exposure. This system was developed and evaluated through extensive use of piloted simulation and has demonstrated a 'pilot centered' concept of automated and integrated navigation and terrain mission planning flight guidance. This system has shown a significant improvement in pilot situational awareness, and mission effectiveness as well as a decrease in training and proficiency time required for a near terrain, nighttime, adverse weather system. AVRADA's NUH-60A STAR (Systems Testbed for Avionics Research) helicopter was specially modified, in house, for the flight evaluation of the CALAHF system. The near terrain trajectory generation algorithm runs on a multiprocessor flight computer. Global Positioning System (GPS) data are integrated with Inertial Navigation Unit (INU) data in the flight computer to provide a precise navigation solution. The near-terrain trajectory and the aircraft state information are passed to a Silicon Graphics computer to provide the graphical 'pilot centered' guidance, presented on a Honeywell Integrated Helmet And Display Sighting System (IHADSS). The system design, piloted simulation, and initial flight test results are presented.

  4. Results of Short-Period Helicopter System Identification Using Output-Error and Hybrid Search-Gradient Optimization Algorithm

    Directory of Open Access Journals (Sweden)

    Ronaldo Vieira Cruz

    2010-01-01

    Full Text Available This article focuses on the problem of parameter estimation of the uncoupled, linear, short-period aerodynamic derivatives of a “Twin Squirrel” helicopter in level flight and constant speed. A flight test campaign is described with respect to maneuver specification, flight test instrumentation, and experimental data collection used to estimate the aerodynamic derivatives. The identification problem is solved in the time domain using the output-error approach, with a combination of Genetic Algorithm (GA and Levenberg-Marquardt optimization algorithms. The advantages of this hybrid GA and gradient-search methodology in helicopter system identification are discussed.

  5. Multicyclic control of a helicopter rotor considering the influence of vibration, loads, and control motion

    Science.gov (United States)

    Brown, T. J.; Mccloud, J. L., III

    1980-01-01

    Weighted multiple linear regression is used to establish a transfer function matrix relationship between higher harmonic control inputs and transducer vibration outputs for a controllable twist rotor. Data used in the regression were taken from the test of a KAMAN controllable twist rotor conducted in the Ames Research Center's 40- by 80-Foot Wind Tunnel in June 1977. Optimal controls to minimize fixed system vibrational levels are calculated using linear quadratic regulatory theory with a control deflection penalty included in the performance criteria. Control sensitivity to changes in control travel, forward speed, and lift and propulsive forces is examined. It is found that the linear transfer matrix is a strong function of forward speed and a weak function of lift and propulsive force. An open-loop strategy is proposed for systems with limited control travel.

  6. 77 FR 64439 - Airworthiness Directives; Bell Helicopter Textron Canada (Bell) Model Helicopters

    Science.gov (United States)

    2012-10-22

    ... warning system. For helicopters with a single or dual Automatic Flight Control System (AFCS) with a Flight... attitude direction indicators airspeed indicators; Leak testing the pilot pitot static system; and Power-up... with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices...

  7. Helicopter-borne measurements of sea ice thickness, using a small and lightweight, digital EM system

    Science.gov (United States)

    Haas, Christian; Lobach, John; Hendricks, Stefan; Rabenstein, Lasse; Pfaffling, Andreas

    2009-03-01

    Sea ice is an important climate variable and is also an obstacle for marine operations in polar regions. We have developed a small and lightweight, digitally operated frequency-domain electromagnetic-induction (EM) system, a so-called EM bird, dedicated for measurements of sea ice thickness. It is 3.5 m long and weighs only 105 kg, and can therefore easily be shipped to remote places and operated from icebreakers and small helicopters. Here, we describe the technical design of the bird operating at two frequencies of f1 = 3.68 kHz and f2 = 112 kHz, and study its technical performance. On average, noise amounts to ± 8.5 ppm and ± 17.5 ppm for f1 and f2, respectively. Electrical drift amounts to 200 ppm/h and 2000 ppm/h for f1 and f2, during the first 0.5 h of operation. It is reduced by 75% after 2 h. Calibration of the Inphase and Quadrature ppm signals varies by 2 to 3%. A sensitivity study shows that all these signal variations do affect the accuracy of the ice thickness retrieval, but that it remains better than ± 0.1 m over level ice in most cases. This accuracy is also confirmed by means of comparisons of the helicopter EM data with other thickness measurements. The paper also presents the ice thickness retrieval from single-component Inphase data of f1.

  8. Disturbance Observer Based Control of Multirotor Helicopters Based on a Universal Model with Unstructured Uncertainties

    Directory of Open Access Journals (Sweden)

    Ye Xie

    2015-01-01

    Full Text Available To handle different perspectives of unstructured uncertainties, two robust control techniques on the basis of a universal model are studied in this paper. Rather than building a model only applicable to a specific small-scale multirotor helicopter (MHeli, the paper proposes a modeling technique to develop a universal model-framework. Particularly, it is straightforward to apply the universal model to a certain MHeli because the contribution and allocation matrix is proposed in the model-framework. Based on the model uncertainties, the load perturbation of the rotor is the primary focus due to its indispensable importance in the tracking performance. In contrast to the common methods, it is proposed to take this unstructured uncertainty in that external disturbance and designs disturbance observer (DOB. In addition, a class of lead-compensator is specifically designed as for compensating phase lag induced by DOB. Compared with H∞ loop-shaping, greater robust tracking performance on rejecting load perturbation could be achieved as a tradeoff between robust stability and tracking performance which is successfully avoided with DOB-based control strategy.

  9. Investigating Flight with a Toy Helicopter

    Science.gov (United States)

    Liebl, Michael

    2010-01-01

    Flight fascinates people of all ages. Recent advances in battery technology have extended the capabilities of model airplanes and toy helicopters. For those who have never outgrown a childhood enthusiasm for the wonders of flight, it is possible to buy inexpensive, remotely controlled planes and helicopters. A toy helicopter offers an opportunity…

  10. Autonomous landing of a helicopter UAV with a ground-based multisensory fusion system

    Science.gov (United States)

    Zhou, Dianle; Zhong, Zhiwei; Zhang, Daibing; Shen, Lincheng; Yan, Chengping

    2015-02-01

    In this study, this paper focus on the vision-based autonomous helicopter unmanned aerial vehicle (UAV) landing problems. This paper proposed a multisensory fusion to autonomous landing of an UAV. The systems include an infrared camera, an Ultra-wideband radar that measure distance between UAV and Ground-Based system, an PAN-Tilt Unit (PTU). In order to identify all weather UAV targets, we use infrared cameras. To reduce the complexity of the stereovision or one-cameral calculating the target of three-dimensional coordinates, using the ultra-wideband radar distance module provides visual depth information, real-time Image-PTU tracking UAV and calculate the UAV threedimensional coordinates. Compared to the DGPS, the test results show that the paper is effectiveness and robustness.

  11. 78 FR 23692 - Airworthiness Directives; Eurocopter France Helicopters

    Science.gov (United States)

    2013-04-22

    ... in excessive vibration of the helicopter and loss of control of the helicopter. (c) Comments Due Date... Helicopters AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM... AS350B, BA, B1, B2, B3, and D, and Model AS355E, F, F1, F2, and N helicopters with certain tail rotor...

  12. Intelligent electrical harness connector assembly using Bell Helicopter Textron's 'Wire Harness Automated Manufacturing System'

    Science.gov (United States)

    Springer, D. W.

    Bell Helicopter Textron, Incorporated (BHTI) installed two Digital Equipment Corporation PDP-11 computers and an American Can Inc. Ink Jet printer in 1980 as the cornerstone of the Wire Harness Automated Manufacturing System (WHAMS). WHAMS is based upon the electrical assembly philosophy of continuous filament harness forming. This installation provided BHTI with a 3 to 1 return-on-investment by reducing wire and cable identification cycle time by 80 percent and harness forming, on dedicated layout tooling, by 40 percent. Yet, this improvement in harness forming created a bottle neck in connector assembly. To remove this bottle neck, BHTI has installed a prototype connector assembly cell that integrates the WHAMS' data base and innovative computer technologies to cut harness connector assembly cycle time. This novel connector assembly cell uses voice recognition, laser identification, and animated computer graphics to help the electrician in the correct assembly of harness connectors.

  13. Design and preliminary tests of a blade tip air mass injection system for vortex modification and possible noise reduction on a full-scale helicopter rotor

    Science.gov (United States)

    Pegg, R. J.; Hosier, R. N.; Balcerak, J. C.; Johnson, H. K.

    1975-01-01

    Full-scale tests were conducted on the Langley helicopter rotor test facility as part of a study to evaluate the effectiveness of a turbulent blade tip air mass injection system in alleviating the impulsive noise (blade slap) caused by blade-vortex interaction. Although blade-slap conditions could not be induced during these tests, qualitative results from flow visualization studies using smoke showed that the differential velocity between the jet velocity and the rotor tip speed was a primary parameter controlling the vortex modification.

  14. Quad-Rotor Helicopter Autonomous Navigation Based on Vanishing Point Algorithm

    Directory of Open Access Journals (Sweden)

    Jialiang Wang

    2014-01-01

    Full Text Available Quad-rotor helicopter is becoming popular increasingly as they can well implement many flight missions in more challenging environments, with lower risk of damaging itself and its surroundings. They are employed in many applications, from military operations to civilian tasks. Quad-rotor helicopter autonomous navigation based on the vanishing point fast estimation (VPFE algorithm using clustering principle is implemented in this paper. For images collected by the camera of quad-rotor helicopter, the system executes the process of preprocessing of image, deleting noise interference, edge extracting using Canny operator, and extracting straight lines by randomized hough transformation (RHT method. Then system obtains the position of vanishing point and regards it as destination point and finally controls the autonomous navigation of the quad-rotor helicopter by continuous modification according to the calculated navigation error. The experimental results show that the quad-rotor helicopter can implement the destination navigation well in the indoor environment.

  15. Application of the Baseline Rotonet system to the prediction of helicopter tone noise

    Science.gov (United States)

    Golub, R. A.; Weir, D. S.; Tracy, M. B.

    1986-07-01

    The capabilities of the baseline Rotonet system designed to predict helicopter noise are analyzed. The modules of the system utilized for main and tail rotor geometry and blade section aerodynamic characteristics, for analyses, and for source-to-observer geometry, and atmospheric and ground effects calculations are described; a diagram of the system is provided. The Rotonet system produces axial force, tone noise, and sound pressure level information and a one third octave spectrum related to rotor tone noise and broadband noise sources. Main rotor noise predictions are compared with flight data. It is observed that both sets of data reveal increase loading on the advancing side and decrease loading on the retreating side. The tone noise and sound pressure levels for the first and second harmonics correlate well with the flight data; however, there is only fair agreement for the third harmonics of the sound pressure level. Analysis of the spectra display lower noise levels for higher altitudes and lower speeds. It is noted that the baseline Rotonet system is applicable for predicting performance and noise signatures for the lower harmonics. A phase II Rotonet system for evaluating higher harmonics is being developed.

  16. Preliminary Design of a Tip-Jet-Driven Heavy Lift Helicopter Incorporating Circulation Control

    Science.gov (United States)

    1981-03-01

    helicopter size, and soon become limiting factors (Reference 1). 2 .i1 * ~ ~ ~ Fgr 1. XH-17qI¶ ,=---.- I~~~~Fgr ___.________________I 44 Figur 1. X-1...have not been practical in the past because of the limitations imposed by available engines and materials. For example, the afterburners at the blade...successive runs. An option was a-’ailable to optimize the main rotor automatically using iterative procedures. The funcions of the individual

  17. 直升机结构响应主动控制飞行试验%Flight test of active control of structure response for helicopter

    Institute of Scientific and Technical Information of China (English)

    陆洋; 顾仲权; 凌爱民; 李明强

    2012-01-01

    为验证结构响应主动控制方法在直升机振动控制中的有效性,以某轻型直升机为验证机,基于具有在线识别功能的时域自适应控制算法,进行了直升机结构响应主动控制飞行试验研究.给出了飞行试验方法、试验系统组成、试验内容及其过程.通过对飞行试验数据的处理分析,对减振效果进行了评估.试飞结果表明:ACSR (Active Control of Structure Response)系统对各测点的垂向振动均有减振效果,各速度状态下的全机垂向减振效率在30%~66%之间,巡航速度状态下具有最佳的减振效率;此外,各测点的侧向振动水平也有一定程度的减小.%In order to verify the validity for the method of active control of structural response (ACSR) in helicopter vibration reduction, the flight tests are carried out on a lighter helicopter based on the adaptive control algorithm with online identification in time domain. Details about the ACSR system composing and the scheme of the flight tests are brought forward. Then, summary and analysis of the flight test data are given. The results of flight tests show that when the ACSR system is working , the vertical vibration level of every evaluation points can be reduced. And the reduction efficiency of total helicopter is between 30% and 66% at different flight speeds; best efficiency can be acquired at cruise speed. At the same time, to some extent, vibration reduction in lateral direction can be observed as well.

  18. 基于LQR直升机模糊滑模跟踪控制%Fuzzy Sliding-Mode Tracking Control of Helicopter Based on LQR

    Institute of Scientific and Technical Information of China (English)

    王修岩; 刁国亮; 李宗帅

    2012-01-01

    As the helicopter is a strong coupling and nonlinear system, the original mathematical model of helicopter is linearized and decoupled. A fuzzy sliding-mode control method was adopted to achieve the tracking control of the helicopter attitude angles. The optimal Linear Quadratic Regulator was used for the design of integral switching surface. The product of switching manifold and its differential and the change in switching gain were used as language variables of fuzzy system which was designed to adjust the switching gain. Simulations show that the exponential stability of tracking error and the robustness against external disturbance are obtained and the controller output chattering problem is significantly improved.%研究直升机系统稳定性优化问题,由于直升机系统的强耦合和非线性特性的影响,使飞行的稳定性和实时跟踪性差.为解决上述问题,对直升机原始数学模型进行近似线性化和解耦处理,采用模糊滑模控制方法实现直升机姿态角度的跟踪控制.首先,在滑模面的设计中引入最优线性二次型调节器,构建一种积分型切换面.其次,以切换面及导数的乘积和滑模切换增益的变化量为模糊系统的变量,实时调整变结构控制项的切换增益.仿真结果表明,通过控制器设计能够实现直升机姿态角度跟踪的稳定性,对外界不确定干扰具有强鲁棒性且控制器输出抖振问题得到明显改善.

  19. Weapon Control System for Airborne Application.

    Directory of Open Access Journals (Sweden)

    M. Sankar Kishore

    2000-07-01

    Full Text Available The integrated fire' control system (IFCS plays an important role in the present-day fighter aircraft and helicopters. Wecapons, such as missiles (active/passive, rockets and guns may be present on thelfighter aircraft or helicopter .IFCS monitors the status of the weapons present on the vehicle and passes the information to pilot/co-pilot. Depending upon the health/availability of the weapons, IFCS selects/fires the weapons. An attempt has been made to bring out the details of one such IFCS. As a I stepping stone, smaller version is developed and same philosophy can be used for integrating ftlore and I more weapons. Here, emphasis has been made on design and development of weapon control unit which is the heart f IFCS, both in hardware and software. The system has been developed using a 486 DX2 processor, and an elaborate software has been developed in PL/M.

  20. Sensitivity analysis of helicopter IMC decelerating steep approach and landing performance to navigation system parameters. [Instrument Meteorological Conditions

    Science.gov (United States)

    Karmali, M. S.; Phatak, A. V.; Bull, J. S.; Peach, L. L.; Demko, P. S.

    1984-01-01

    The present investigation is concerned with a sensitivity analysis of the Decelerated Steep Approach and Landing (DSAL) maneuver to on-board and ground-based navigation system parameters. The Instrument Meteorological Conditions (IMC) DSAL maneuver involves decelerating to zero range rate while tracking the localizer and glideslope. The considered study investigated the performance of the navigation systems using Constant Deceleration Profile (CDP) guidance and a six degrees glideslope trajectory. A closed-loop computer simulation of the UH1H helicopter DSAL system was developed for the sensitivity analysis. Conclusions on system performance parameter sensitivity are discussed.

  1. Resilience and brittleness in the offshore helicopter transportation system: The identification of constraints and sacrifice decisions in pilots' work

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, Jose O. [Graduate Program in Informatics-NCE and IM, Federal University of Rio de Janeiro, Cidade Universitaria, Ilha do Fundao, Rio de Janeiro, RJ (Brazil); Woods, David D. [Ohio State University, Ohio (United States); Carvalho, Paulo V.R. [National Nuclear Energy Commission/Nuclear Engineering Institute, Cidade Universitaria-Ilha do Fundao, Rio de Janeiro RJ 21945-970 (Brazil)], E-mail: paulov@pesquisador.cnpq.br; Huber, Gilbert J.; Borges, Marcos R.S. [Graduate Program in Informatics-NCE and IM, Federal University of Rio de Janeiro, Cidade Universitaria, Ilha do Fundao, Rio de Janeiro, RJ (Brazil)

    2009-02-15

    Offshore transportation using helicopters is a complex socio-technical system. The resilience of this system is an emergent property related to performance variability in many nested levels, e.g. pilot activities, maintenance, management systems, helicopter design and so forth. This paper examines production/safety tradeoffs in pilots' work in the helicopter transportation system for the Campos Basin oil fields in Brazil to understand the resilience and brittleness of this system. The study team carried out and analyzed 63 h of interviews with pilots, co-pilots, managers and human resources personnel of some of the main helicopter-operating companies. About 80% of the oil extracted in Brazil comes from this Basin, a 3 h drive north of Rio de Janeiro city. The oil company hires nine helicopter-operating companies to transport about 40,000 people who work on ships and platforms every month. The main goal of this project is to discover how the transport system is resilient and brittle, given the workload demands and economic pressures. The analysis uncovered goal conflicts that arise at the boundaries of the organizations and how people in different roles cope with these conflicts, and their implications to overall system safety and resilience.

  2. Robust non-fragile H∞ controller design method for small-scale unmanned helicopter%小型无人直升机非脆弱鲁棒H∞控制器设计方法研究

    Institute of Scientific and Technical Information of China (English)

    夏慧; 陈庆伟

    2015-01-01

    针对小型无人直升机存在时滞、不确定性及非线性动态问题,提出一种针对小型无人直升机模型具有非线性和时滞的H∞非脆弱鲁棒控制器设计方法。首先将直升机系统描述为具有参数扰动、时滞和非线性项的1个状态方程,然后基于李雅普诺夫方程给出了H∞非脆弱鲁棒控制器存在的充分条件。仿真结果表明该方法设计的控制器具有良好的鲁棒性和非脆弱性。%Considering the delay, uncertainty and nonlinear dynamics of small-scale unmanned helicopters,a robust non-fragile H∞ controller design method for a small-scale unmanned helicopter model is proposed with nonlinearity and time delay. Firstly,the helicopter system is described as a state equation with parameter perturbation,time delay and nonlinear term. Then,sufficient condition for the existence of the H∞ non-fragile robust controller is given based on Lyapunov function. Simulation results validate the robustness and non-fragility of the proposed method.

  3. An Examination of Safety Management Systems and Aviation Technologies in the Helicopter Emergency Medical Services Industry

    Science.gov (United States)

    Buckner, Steven A.

    The Helicopter Emergency Medical Service (HEMS) industry has a significant role in the transportation of injured patients, but has experienced more accidents than all other segments of the aviation industry combined. With the objective of addressing this discrepancy, this study assesses the effect of safety management systems implementation and aviation technologies utilization on the reduction of HEMS accident rates. Participating were 147 pilots from Federal Aviation Regulations Part 135 HEMS operators, who completed a survey questionnaire based on the Safety Culture and Safety Management System Survey (SCSMSS). The study assessed the predictor value of SMS implementation and aviation technologies to the frequency of HEMS accident rates with correlation and multiple linear regression. The correlation analysis identified three significant positive relationships. HEMS years of experience had a high significant positive relationship with accident rate (r=.90; pNVG) (r=.38; pNVG, TAWS, and SMS, HEMS years of experience explained 81.4% of the variance in accident rate scores (p<.05), and HEMS years of experience was found to be a significant predictor of accident rates (p<.05). Additional quantitative regression analysis was recommended to replicate the results of this study and to consider the influence of these variables for continued reduction of HEMS accidents, and to induce execution of SMS and aviation technologies from a systems engineering application. Recommendations for practice included the adoption of existing regulatory guidance for a SMS program. A qualitative analysis was also recommended for future study SMS implementation and HEMS accident rate from the pilot's perspective. A quantitative longitudinal study would further explore inferential relationships between the study variables. Current strategies should include the increased utilization of available aviation technology resources as this proactive stance may be beneficial for the establishment of

  4. Applications of numerical optimization methods to helicopter design problems - A survey

    Science.gov (United States)

    Miura, H.

    1985-01-01

    A survey of applications of mathematical programming methods is used to improve the design of helicopters and their components. Applications of multivariable search techniques in the finite dimensional space are considered. Five categories of helicopter design problems are considered: (1) conceptual and preliminary design, (2) rotor-system design, (3) airframe structures design, (4) control system design, and (5) flight trajectory planning. Key technical progress in numerical optimization methods relevant to rotorcraft applications are summarized.

  5. Applications of numerical optimization methods to helicopter design problems: A survey

    Science.gov (United States)

    Miura, H.

    1984-01-01

    A survey of applications of mathematical programming methods is used to improve the design of helicopters and their components. Applications of multivariable search techniques in the finite dimensional space are considered. Five categories of helicopter design problems are considered: (1) conceptual and preliminary design, (2) rotor-system design, (3) airframe structures design, (4) control system design, and (5) flight trajectory planning. Key technical progress in numerical optimization methods relevant to rotorcraft applications are summarized.

  6. Analytical investigation of the pericyclic variable-speed transmission system for helicopter main-gearbox

    Science.gov (United States)

    Saribay, Zihni Burcay

    and load carrying capacity of the PVT face-gears are analyzed at the helicopter torque levels. The dynamic motion of the nutating gear mechanisms is studied to capture the load carrying capacity of the PVT support bearings. A design analysis of the PVT system with 24:1 reduction ratio at 764HP power level is conducted to replace 3 reduction stages of the existing K-MAX intermeshing rotor transmission system. The design and analysis tools established in this research are applied in the design study. The achieved design is compared to the existing K-MAX transmission. Approximately 50% weight reduction and 70% volume reduction are accomplished with the PVT system with less than 1% lower efficiency than existing K-MAX drive train gears.

  7. Polyspectral signal analysis techniques for condition based maintenance of helicopter drive-train system

    Science.gov (United States)

    Hassan Mohammed, Mohammed Ahmed

    For an efficient maintenance of a diverse fleet of air- and rotorcraft, effective condition based maintenance (CBM) must be established based on rotating components monitored vibration signals. In this dissertation, we present theory and applications of polyspectral signal processing techniques for condition monitoring of critical components in the AH-64D helicopter tail rotor drive train system. Currently available vibration-monitoring tools are mostly built around auto- and cross-power spectral analysis which have limited performance in detecting frequency correlations higher than second order. Studying higher order correlations and their Fourier transforms, higher order spectra, provides more information about the vibration signals which helps in building more accurate diagnostic models of the mechanical system. Based on higher order spectral analysis, different signal processing techniques are developed to assess health conditions of different critical rotating-components in the AH-64D helicopter drive-train. Based on cross-bispectrum, quadratic nonlinear transfer function is presented to model second order nonlinearity in a drive-shaft running between the two hanger bearings. Then, quadratic-nonlinearity coupling coefficient between frequency harmonics of the rotating shaft is used as condition metric to study different seeded shaft faults compared to baseline case, namely: shaft misalignment, shaft imbalance, and combination of shaft misalignment and imbalance. The proposed quadratic-nonlinearity metric shows better capabilities in distinguishing the four studied shaft settings than the conventional linear coupling based on cross-power spectrum. We also develop a new concept of Quadratic-Nonlinearity Power-Index spectrum, QNLPI(f), that can be used in signal detection and classification, based on bicoherence spectrum. The proposed QNLPI(f) is derived as a projection of the three-dimensional bicoherence spectrum into two-dimensional spectrum that

  8. Inspiring and Challenging Laboratory Exercise in Multivariable Control Theory – The Four-rotor Helicopter

    OpenAIRE

    Dag A. H. Samuelsen; Olaf H. Graven

    2012-01-01

    Engineering students in a module on multivariable control theory are given a laboratory exercise for developing their skills in practical implementation of control systems. This is done in an effort to create a more complete module that gives the students experiences in the practical sides of implementing control systems, while still being theoretically challenging and inspiring. Presenting students with this kind of real-life challenges like sub-optimal models, limited processing time and la...

  9. NASTRAN data generation of helicopter fuselages using interactive graphics. [preprocessor system for finite element analysis using IBM computer

    Science.gov (United States)

    Sainsbury-Carter, J. B.; Conaway, J. H.

    1973-01-01

    The development and implementation of a preprocessor system for the finite element analysis of helicopter fuselages is described. The system utilizes interactive graphics for the generation, display, and editing of NASTRAN data for fuselage models. It is operated from an IBM 2250 cathode ray tube (CRT) console driven by an IBM 370/145 computer. Real time interaction plus automatic data generation reduces the nominal 6 to 10 week time for manual generation and checking of data to a few days. The interactive graphics system consists of a series of satellite programs operated from a central NASTRAN Systems Monitor. Fuselage structural models including the outer shell and internal structure may be rapidly generated. All numbering systems are automatically assigned. Hard copy plots of the model labeled with GRID or elements ID's are also available. General purpose programs for displaying and editing NASTRAN data are included in the system. Utilization of the NASTRAN interactive graphics system has made possible the multiple finite element analysis of complex helicopter fuselage structures within design schedules.

  10. Does helicopter transport improve outcomes independently of emergency medical system time?

    Science.gov (United States)

    Ryb, Gabriel E; Dischinger, Patricia; Cooper, Carnell; Kufera, Joseph A

    2013-01-01

    Helicopter emergency medical systems (HEMS) have been reported to improve trauma survival. This study seeks to determine HEMS effect on survival across different subpopulations in relation to injury severity, degree of physiologic derangement, and transportation time (TT). The 2007 National Trauma Data Bank adult patients transported directly to hospitals by ground ambulance or HEMS were compared in relation to their survival with discharge and other possible confounders. Multivariate models were constructed to determine the adjusted odds ratios (OR) of survival for the entire cohort and across subpopulations stratified by different Injury Severity Score (ISS), hospital Revised Trauma Score (RTS), and TT. A total of 192,422 patients with complete data were analyzed. HEMS patients (15.3%) experienced lower survival rates than those transported by ground (93.8% vs. 96.1%, p < 0.001). Multivariate analysis revealed a survival advantage for HEMS in the entire cohort (OR, 1.78 [1.65-1.92]). Adding TT to the model did not affect HEMS effect on survival. HEMS effect was present across all ISS levels but was limited to those with RTS of less than 6 (n = 15,427; OR, 2.28 [2.10-2.49]). In contrast, those with RTS of 6 or greater experienced lower adjusted survival when transported by HEMS (n = 176,995; OR, 0.83 [0.74-0.94]). Stratification by RTS and ISS did not affect the results. Substratification by TT revealed no effect of HEMS on survival among patients with RTS of less than 6, ISS of less than 16, and TT of 60 minutes or greater. Remaining associations were not affected by TT substratification. HEMS beneficial effect on survival seems to be limited to patients with physiologic instability. Physiologically stable patients seem to have a worse outcome when transported by air. Epidemiologic/prognostic study, level III.

  11. Square tracking sensor for autonomous helicopter hover stabilization

    Science.gov (United States)

    Oertel, Carl-Henrik

    1995-06-01

    Sensors for synthetic vision are needed to extend the mission profiles of helicopters. A special task for various applications is the autonomous position hold of a helicopter above a ground fixed or moving target. As a proof of concept for a general synthetic vision solution a restricted machine vision system, which is capable of locating and tracking a special target, was developed by the Institute of Flight Mechanics of Deutsche Forschungsanstalt fur Luft- und Raumfahrt e.V. (i.e., German Aerospace Research Establishment). This sensor, which is specialized to detect and track a square, was integrated in the fly-by-wire helicopter ATTHeS (i.e., Advanced Technology Testing Helicopter System). An existing model following controller for the forward flight condition was adapted for the hover and low speed requirements of the flight vehicle. The special target, a black square with a length of one meter, was mounted on top of a car. Flight tests demonstrated the automatic stabilization of the helicopter above the moving car by synthetic vision.

  12. Law of Torsional Vibration and Discussion on Vibration Suppression Based on Helicopter/Engine System

    Science.gov (United States)

    Miao, Lizhen; Zhang, Haibo; Ning, Jingtao

    2016-04-01

    With both the advantages like attacking close targets and the disadvantages especially like dynamic coupling, helicopter deserves more investigations these days. This paper did dynamic study both in a simplified and a multi-degree of freedom, comprehensive helicopter model, so that to reveal the law of torsional vibration. In the simplified model, the law how arbitrary parameter affects the first-order vibration mode, is discussed. Then, the validation is done in a multi-degree of freedom model by means of the fast Fourier transformation (FFT) method. In this case, how the low-frequency vibration mode relates with the first-order vibration mode is clearly presented, as well as the research direction to design a filter. Lastly, a simple filter is designed with some simulations.

  13. Helicopter emergency medical services accident rates in different international air rescue systems

    OpenAIRE

    Hinkelbein, J; Schwalbe, M.; H V Genzwuerker

    2010-01-01

    J Hinkelbein1,2, M Schwalbe2, H V Genzwuerker2,31Department for Anesthesiology and Intensive Care Medicine, University Hospital Cologne, Germany; 2Working Group “Emergency Medicine and Air Rescue”, German Society of Aviation and Space Medicine (DGRLM) eV; 3Clinic of Anesthesiology and Intensive Care Medicine, Neckar-Odenwald-Kliniken gGmbH, Hospitals Buchen and Mosbach, Buchen, GermanyAim: Each year approximately two to four helicopter emergency medical services (HEMS) cra...

  14. System-Integrated Finite Element Analysis of a Full-Scale Helicopter Crash Test with Deployable Energy Absorbers

    Science.gov (United States)

    Annett, Martin S.; Polanco, Michael A.

    2010-01-01

    A full-scale crash test of an MD-500 helicopter was conducted in December 2009 at NASA Langley's Landing and Impact Research facility (LandIR). The MD-500 helicopter was fitted with a composite honeycomb Deployable Energy Absorber (DEA) and tested under vertical and horizontal impact velocities of 26-ft/sec and 40-ft/sec, respectively. The objectives of the test were to evaluate the performance of the DEA concept under realistic crash conditions and to generate test data for validation of a system integrated finite element model. In preparation for the full-scale crash test, a series of sub-scale and MD-500 mass simulator tests was conducted to evaluate the impact performances of various components, including a new crush tube and the DEA blocks. Parameters defined within the system integrated finite element model were determined from these tests. The objective of this paper is to summarize the finite element models developed and analyses performed, beginning with pre-test predictions and continuing through post-test validation.

  15. Stabilization and control of quad-rotor helicopter using a smartphone device

    Science.gov (United States)

    Desai, Alok; Lee, Dah-Jye; Moore, Jason; Chang, Yung-Ping

    2013-01-01

    In recent years, autonomous, micro-unmanned aerial vehicles (micro-UAVs), or more specifically hovering micro- UAVs, have proven suitable for many promising applications such as unknown environment exploration and search and rescue operations. The early versions of UAVs had no on-board control capabilities, and were difficult for manual control from a ground station. Many UAVs now are equipped with on-board control systems that reduce the amount of control required from the ground-station operator. However, the limitations on payload, power consumption and control without human interference remain the biggest challenges. This paper proposes to use a smartphone as the sole computational device to stabilize and control a quad-rotor. The goal is to use the readily available sensors in a smartphone such as the GPS, the accelerometer, the rate-gyros, and the camera to support vision-related tasks such as flight stabilization, estimation of the height above ground, target tracking, obstacle detection, and surveillance. We use a quad-rotor platform that has been built in the Robotic Vision Lab at Brigham Young University for our development and experiments. An Android smartphone is connected through the USB port to an external hardware that has a microprocessor and circuitries to generate pulse-width modulation signals to control the brushless servomotors on the quad-rotor. The high-resolution camera on the smartphone is used to detect and track features to maintain a desired altitude level. The vision algorithms implemented include template matching, Harris feature detector, RANSAC similarity-constrained homography, and color segmentation. Other sensors are used to control yaw, pitch, and roll of the quad-rotor. This smartphone-based system is able to stabilize and control micro-UAVs and is ideal for micro-UAVs that have size, weight, and power limitations.

  16. [Back ache in helicopter pilots].

    Science.gov (United States)

    Colak, S; Jovelić, S; Manojlović, J

    1992-01-01

    Due to low back pain (LBP) and harmful effects of flying, questionnaires were sent to 71 helicopter pilots of the experimental group, 22 mechanics helicopter flyers and to the control group of 28 air-traffic controllers. The prevalence of LBP was the highest in helicopter pilots, then in helicomechanics and air-traffic controllers (53%, 50% and 36%). Effects of exposure to vibration, body posture and working load have not contributed significantly to the occurrence of LBP. LBP has not lead to an important difference in the strength of the back musculature, body mass index and spondylosis, that is, scoliosis. The necessity of further study of LBP and maintaining of specific preventive measures are indicated.

  17. A 3D imaging system for the non-intrusive in-flight measurement of the deformation of an aircraft propeller and a helicopter rotor

    Science.gov (United States)

    Stasicki, Bolesław; Boden, Fritz; Ludwikowski, Krzysztof

    2017-02-01

    The non-intrusive in-flight deformation measurement and the resulting local pitch of an aircraft propeller or helicopter rotor blade is a demanding task. The idea of an imaging system integrated and rotating with the air-craft propeller has already been presented at the 30th International Congress on High-Speed Imaging and Photonics (ICHSIP30) in 2012. Since then this system has been designed, constructed and tested in the laboratory as well as in-flight on the Cobra VUT100 of Evektor Aerotechnik, Kunovice (CZ). The major aim of the EU FP7 project AIM2 ("Advanced In-flight Measurement techniques 2" - contract No. 266107) was to ascertain the feasibility of this technique under extreme conditions - vibration and large centrifugal forces - to real flight testing. Based on the gained experience a new rotating system for the application on helicopter rotors has recently been constructed and tested on the whirl tower of Airbus Helicopters, Donauwoerth (D). In this paper the principle of the applied Image Pattern Correlation Technique (IPCT), a specialized type of Digital Image Correlation (DIC), is outlined and the construction of both rotating 3D image acquisition systems dedicated to the in-flight deformation measurement of the aircraft propeller and helicopter rotor are described. Furthermore, the results of the ground and in-flight tests of these systems will be shown and discussed. The obtained results will be helpful for manufacturers in the design of their future aircrafts.

  18. Frequency Transmission Control of Local Networked Control Systems Approach

    Directory of Open Access Journals (Sweden)

    O. Esquivel-Flores

    2012-08-01

    Full Text Available The use of Network Control Systems has been successful in the industry and therefore has opened several lines ofresearch. Control systems over a communication network include two important considerations, control andscheduling. Co-design strategies are focused on maintaining adequate control performance and maximize the level ofservice. Network scheduling is the main objective to resolve because through a balanced data load is possible tomaintain control performance in a desired level. This article reviews a scheduling strategy based on frequencytransition modeled as a linear subsystem, this control reconfigure on line the sensors’ periods. The case of study isthe control of a prototype helicopter and by numerical simulations it shows the effect of changing the transmissionfrequency.

  19. A pilot rating scale for evaluating failure transients in electronic flight control systems

    Science.gov (United States)

    Hindson, William S.; Schroeder, Jeffery A.; Eshow, Michelle M.

    1990-01-01

    A pilot rating scale was developed to describe the effects of transients in helicopter flight-control systems on safety-of-flight and on pilot recovery action. The scale was applied to the evaluation of hardovers that could potentially occur in the digital flight-control system being designed for a variable-stability UH-60A research helicopter. Tests were conducted in a large moving-base simulator and in flight. The results of the investigation were combined with existing airworthiness criteria to determine quantitative reliability design goals for the control system.

  20. Feasibility study for ergonomic analysis and design of future helicopter cockpit systems

    Science.gov (United States)

    Hawkins, H. L.

    1985-01-01

    The Army's light scout-attack helicopters (LHXs), planned for deployment in the 1990's, will fly nap-of-the-earth (NOE) missions in high threat environments, often under poor visibility and adverse atmospheric conditions, and probably with a one man crew. A procedure for the analysis of pilot workload that will identify and explicate the main characteristics of those LHX mission components holding overload potential is described. A principled, in-depth, explication of the cognitive demans of LHX piloting is essential to any effective effort to address the human factors issues. A task-analytic procedure that will yield the detail and organizstion needed to achieve these goals is examined.

  1. Robust Hierarchical Control for Uncertain Multivariable Hexarotor Systems

    Directory of Open Access Journals (Sweden)

    Wei Lin

    2015-01-01

    Full Text Available Multirotor helicopter attracts more attention due to its increased load capacity and being highly maneuverable. However, these helicopters are uncertain multivariable systems, which pose a challenge for their robust controller design. In this paper, a robust two-loop control scheme is proposed for a hexarotor system. The resulted controller consists of a nominal controller and a robust compensator. The robust compensators are added to restrain the influences of uncertainties such as nonlinear dynamics, coupling, parametric uncertainties, and external disturbances. It is proven that the tracking errors are ultimately bounded with specified boundaries by choosing the parameters of the robust compensators. Simulation results on the hexarotor demonstrate the effectiveness of the proposed control method.

  2. Wind-Tunnel Evaluation of the Effect of Blade Nonstructural Mass Distribution on Helicopter Fixed-System Loads

    Science.gov (United States)

    Wilbur, Matthew L.; Yeager, Jr, William T.; Singleton, Jeffrey D.; Mirick, Paul H.; Wilkie, W K.

    1998-01-01

    This report provides data obtained during a wind-tunnel test conducted to investigate parametrically the effect of blade nonstructural mass on helicopter fixed-system vibratory loads. The data were obtained with aeroelastically scaled model rotor blades that allowed for the addition of concentrated nonstructural masses at multiple locations along the blade radius. Testing was conducted for advance ratios ranging from 0.10 to 0.35 for 10 blade-mass configurations. Three thrust levels were obtained at representative full-scale shaft angles for each blade-mass configuration. This report provides the fixed-system forces and moments measured during testing. The comprehensive database obtained is well-suited for use in correlation and development of advanced rotorcraft analyses.

  3. Inspiring and Challenging Laboratory Exercise in Multivariable Control Theory – The Four-rotor Helicopter

    Directory of Open Access Journals (Sweden)

    Dag A. H. Samuelsen

    2012-12-01

    Full Text Available Engineering students in a module on multivariable control theory are given a laboratory exercise for developing their skills in practical implementation of control systems. This is done in an effort to create a more complete module that gives the students experiences in the practical sides of implementing control systems, while still being theoretically challenging and inspiring. Presenting students with this kind of real-life challenges like sub-optimal models, limited processing time and large degree of uncertainty, is a challenging task, partly due to the need of adapting the level of complexity to the student or group of students doing the exercise in order to keep them engaged throughout the exercise, and in part due to the university's need to reduce expenses related to the administration, supervision, and execution of laboratory exercises. The possibility of adapting the complexity of the exercise to each student's skill level is important, both through the design of the exercise and through the students choosing between different models. The eager student might be tempted by the better performing, but more complex models, while the struggling student can find satisfaction in stabilising the aircraft using the less complex models. The laboratory setup presented uses low-cost components, giving low investment and maintenance costs.

  4. Inspiring and Challenging Laboratory Exercise in Multivariable Control Theory – The Four-rotor Helicopter

    Directory of Open Access Journals (Sweden)

    Dag A. H. Samuelsen

    2012-12-01

    Full Text Available Engineering students in a module on multivariable control theory are given a laboratory exercise for developing their skills in practical implementation of control systems. This is done in an effort to create a more complete module that gives the students experiences in the practical sides of implementing control systems, while still being theoretically challenging and inspiring. Presenting students with this kind of real-life challenges like sub-optimal models, limited processing time and large degree of uncertainty, is a challenging task, partly due to the need of adapting the level of complexity to the student or group of students doing the exercise in order to keep them engaged throughout the exercise, and in part due to the university's need to reduce expenses related to the administration, supervision, and execution of laboratory exercises. The possibility of adapting the complexity of the exercise to each student's skill level is important, both through the design of the exercise and through the students choosing between different models. The eager student might be tempted by the better performing, but more complex models, while the struggling student can find satisfaction in stabilising the aircraft using the less complex models. The laboratory setup presented uses low-cost components, giving low investment and maintenance costs.

  5. Helicopter collision avoidance and brown-out recovery with HELLAS

    Science.gov (United States)

    Seidel, Christian; Schwartz, Ingo; Kielhorn, Peter

    2008-10-01

    EADS Germany is the world market leader in commercial and military Helicopter Laser Radar (HELLAS) Obstacle Warning Systems. The HELLAS-Warning System has been introduced into the market in 2000, is in service at German Federal Police and Royal Thai Air Force. HELLAS was also successfully evaluated by the Foreign Comparative Test Program (FCT) of the U.S. Army and other governmental agencies. Currently the successor system for military applications, HELLAS-Awareness, is in qualification phase. It will have extended sensor performance, enhanced real-time data processing capabilities and advanced human machine interface (HMI) features. Flight tests on NH90 helicopter have been successfully performed. Helicopter series integration is scheduled to begin from 2009. We will give an outline of the new sensor unit concerning detection technology and helicopter integration aspects. The system provides a widespread field of view with additional dynamic line of sight steering and a large detection range in combination with a high frame rate. We will show the HMI representations. This HELLAS system is the basis for a 3 dimensional see-and-remember-system for brown-out recovery. When landing in sandy or dusty areas the downwash of the helicopter rotor causes clouds of visually-restrictive material that can completely obstruct the pilot's outside reference, resulting in a complete loss of situational awareness and spatial orientation of the pilot which can end up in total loss of aircraft control and dangerous accidents. The brown-out recovery system presented here creates an augmented enhanced synthetic vision of the landing area with the surrounding which is based on HELLAS range image data as well as altimeter and inertial reference information.

  6. An Optimized Air-Core Coil Sensor with a Magnetic Flux Compensation Structure Suitable to the Helicopter TEM System

    Directory of Open Access Journals (Sweden)

    Chen Chen

    2016-04-01

    Full Text Available The air-core coil sensor (ACS is widely used as a transducer to measure the variation in magnetic fields of a helicopter transient electromagnetic (TEM system. A high periodic emitting current induces the magnetic field signal of the underground medium. However, such current also generates a high primary field signal that can affect the received signal of the ACS and even damage the receiver. To increase the dynamic range of the received signal and to protect the receiver when emitting current rises/falls, the combination of ACS with magnetic flux compensation structure (bucking coil is necessary. Moreover, the optimized ACS, which is composed of an air-core coil and a differential pre-amplifier circuit, must be investigated to meet the requirements of the helicopter TEM system suited to rapid surveying for shallow buried metal mine in rough topography. Accordingly, two ACSs are fabricated in this study, and their performance is verified and compared inside a magnetic shielding room. Using the designed ACSs, field experiments are conducted in Baoqing County. The field experimental data show that the primary field response can be compensated when the bucking coil is placed at an appropriate point in the range of allowed shift distance beyond the center of the transmitting coil and that the damage to the receiver induced by the over-statured signal can be solved. In conclusion, a more suitable ACS is adopted and is shown to have better performance, with a mass of 2.5 kg, resultant effective area of 11.6 m2 (i.e., diameter of 0.496 m, 3 dB bandwidth of 66 kHz, signal-to-noise ratio of 4 (i.e., varying magnetic field strength of 0.2 nT/s, and normalized equivalent input noise of 3.62 nV/m2.

  7. A vision system for landing an unmanned helicopter in a complex environment

    Science.gov (United States)

    Shi, Haiqing; Wang, Hong

    2009-10-01

    We present a vision-based landing algorithm for an autonomous helicopter under complex environment (there are several suspected targets). The algorithm is integrated with algorithms for visual acquisition, recognition of the target and computing the navigation information. In our algorithm, we use international standard landing mark as our landing target. The experiment results demonstrate that our algorithm has the feature of robustness, accuracy and real time. It can meet the actual flight requirements well: the average processing time of a 640×480 image is less than 40ms; the position error is below 5cm in each axis of translation; the angle error is below 3.5°. Based on the algorithm, we win the champion of the aerial robot competition in the 2008 China robot competition and the RoboCup China open.

  8. Specific exercise training for reducing neck and shoulder pain among military helicopter pilots and crew members

    DEFF Research Database (Denmark)

    Murray, Mike; Lange, Britt; Nørnberg, Bo Riebeling

    2015-01-01

    BACKGROUND: Flight-related neck/shoulder pain is frequent among military helicopter pilots and crew members. With a lifetime prevalence of 81 % for pilots and 84 % for crew members, the prevalence of neck pain is considered high compared to the general population. The aim of this study was to inv......BACKGROUND: Flight-related neck/shoulder pain is frequent among military helicopter pilots and crew members. With a lifetime prevalence of 81 % for pilots and 84 % for crew members, the prevalence of neck pain is considered high compared to the general population. The aim of this study...... was to investigate whether a specifically tailored exercise intervention would reduce the prevalence and incidence rate of neck/shoulder pain among helicopter pilots and crew members. METHOD: This study used a prospective, parallel group, single blinded, randomized controlled design. Participants were military...... helicopter pilots and crew members recruited from the Royal Danish Air Force. Inclusion criteria were: 1) employed within the Royal Danish Air Force as a helicopter pilot or onboard crew member (technician, systems-operator, tactical helicopter observer and/or navigator), 2) maintaining operational flight...

  9. Aeromechanical Analysis of a Smart Helicopter Rotor in Forward Flight

    Directory of Open Access Journals (Sweden)

    Jacopo Serafini

    2015-02-01

    Full Text Available This paper deals with a smart system integrated into a helicopter blade aimed at giving an anhedral shape to the blade tip region to alleviate the blade-vortex interaction phenomenon that may cause reduced helicopter performance in terms of noise and vibrations. The blade tip morphing is obtained through the joint action of a magneto-rheological fluid (MRF device, a shape-memory alloy ribbons- based (SMA device and a set of concentrated masses properly distributed spanwise. The presence of this smart actuator (particularly the concentrated masses inside the blades modifies the aeromechanical behaviour of the rotor and may be detrimental in terms of hub vibratory loads, pitch control effectiveness and aeroelastic stability. Following a previous literature work concerning with the effectiveness of the smart actuated rotor in hovering conditions, the present paper focuses on the aeromechanical effects due to the inclusion of the smart device in a four-bladed helicopter rotor in forward flight where blade morphing is not needed. Aim of this work is to investigate on the compatibility of the smart system with the required aeromechanical performance of the rotor, highlighting the feasibility of its application on helicopters.

  10. Government Competitive Test Utility Tactical Transport Aircraft System (UTTAS). Sikorsky YUH-60A Helicopter

    Science.gov (United States)

    1976-11-01

    IN.e COPESO COMPRESOR OICN133 O-CN-G PORT... - control valve that provides regulated air ilow to the pneumatic start system. Pressure regulation...Governing Characteristics 17. In general. the HMU provides for gas generator control in the areas of acceleration limiting. stall and flameout protection...blade stall are not significant. During this evaluation, minor trends indicating an influence by compressibility and blade stall were noted. However

  11. New capabilities and recent research programs of the NASA/Army CH-47B variable-stability helicopter

    Science.gov (United States)

    Hindson, W. S.; Hilbert, K. B.; Tucker, G. E.; Chen, R. T. N.; Fry, E. B.

    1986-01-01

    The CH-47B is the third in a series of variable-stability helicopters developed and operated by NASA since 1952 to investigate helicopter and VTOL handling qualities. Recently, several new capabilities were added to this helicopter to enable it to better support new and evolving research requirements. The installation of a programmable force-feel system for the evaluation pilot's conventional cyclic stick, and a four-axis side-stick controller permit a range of in-flight investigations concerning manipulator characteristics and augmentation system features that had not been possible with earlier NASA research helicopters. A recently installed color electronic display system with a programmable symbol generator will permit the investigation of display formats for a variety of VTOL and helicopter missions. Finally, a powerful new general-purpose flight computer is now in operation. It is programmable in high-level languages and will provide more efficient support of research programs. In addition to these new hardware capabilities, flight-control software has been developed to improve the in-flight simulation capability of the aircraft. A brief description of the CH-47B's variable-stability research equipment is provided, recent research programs are summarized, and some remarks concerning the potential of the helicopter are presented.

  12. 3D Warping Actuation Driven Dynamic Camber Control Concept for Helicopter Rotor Blades Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In a rotorcraft, optimized camber change not only reduces vibratory hub loads and noise but also increases available thrust and improved flight control augmentation....

  13. Multicyclic jet-flap control for alleviation of helicopter blade stresses and fuselage vibration

    Science.gov (United States)

    Mccloud, J. L., III; Kretz, M.

    1974-01-01

    Results of wind tunnel tests of a 12-meter-diameter rotor utilizing multicyclic jet-flap control deflection are presented. Analyses of these results are shown, and experimental transfer functions are determined by which optimal control vectors are developed. These vectors are calculated to eliminate specific harmonic bending stresses, minimize rms levels (a measure of the peak-to-peak stresses), or minimize vertical vibratory loads that would be transmitted to the fuselage. Although the specific results and the ideal control vectors presented are for a specific jet-flap driven rotor, the method employed for the analyses is applicable to similar investigations. A discussion of possible alternative methods of multicyclic control by mechanical flaps or nonpropulsive jet-flaps is presented.

  14. 77 FR 52265 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

    Science.gov (United States)

    2012-08-29

    ... rotor parts, severe vibration, and subsequent loss of control of the helicopter. You may obtain further... vibration, and subsequent loss of control of the helicopter. (c) Compliance You are responsible for... Deutschland GmbH Helicopters AGENCY: Federal Aviation Administration (FAA), DOT. ] ACTION: Notice of...

  15. On-board Model Predictive Control of a Quadrotor Helicopter: Design, Implementation, and Experiments

    Science.gov (United States)

    2012-12-13

    when the controller recovered from large disturbances; typically the path back to the origin would not be along a straight line but rather one or the... back to x1 = −1 m after a delay of 3.5 s. We performed this test with both linear MPC (using only the nominal model) and with LBMPC. Fig. Fig.4.3 shows...The proposed primal-dual infeasible start interior point method (PD IIPM) based on Mehrotra’s predictor- corrector scheme (Mehrotra, 1992) was

  16. Military display market segment: helicopters

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    2004-09-01

    The military display market is analyzed in terms of one of its segments: helicopter displays. Parameters requiring special consideration, to include luminance ranges, contrast ratio, viewing angles, and chromaticity coordinates, are examined. Performance requirements for rotary-wing displays relative to several premier applications are summarized. Display sizes having aggregate defense applications of 5,000 units or greater and having DoD applications across 10 or more platforms, are tabulated. The issue of size commonality is addressed where distribution of active area sizes across helicopter platforms, individually, in groups of two through nine, and ten or greater, is illustrated. Rotary-wing displays are also analyzed by technology, where total quantities of such displays are broken out into CRT, LCD, AMLCD, EM, LED, Incandescent, Plasma and TFEL percentages. Custom, versus Rugged commercial, versus commercial off-the-shelf designs are contrasted. High and low information content designs are identified. Displays for several high-profile military helicopter programs are discussed, to include both technical specifications and program history. The military display market study is summarized with breakouts for the helicopter market segment. Our defense-wide study as of March 2004 has documented 1,015,494 direct view and virtual image displays distributed across 1,181 display sizes and 503 weapon systems. Helicopter displays account for 67,472 displays (just 6.6% of DoD total) and comprise 83 sizes (7.0% of total DoD) in 76 platforms (15.1% of total DoD). Some 47.6% of these rotary-wing applications involve low information content displays comprising just a few characters in one color; however, as per fixed-wing aircraft, the predominant instantiation involves higher information content units capable of showing changeable graphics, color and video.

  17. Simulation validation and flight prediction of UH-60A Black Hawk helicopter/slung load characteristics

    OpenAIRE

    Tyson, Peter H.

    1999-01-01

    Helicopter/slung load systems are two body systems in which the slung load adds its rigid body dynamics, aerodynamics, and sling stretching dynamics to the helicopter. The slung load can degrade helicopter handling qualities and reduce the flight envelope of the helicopter. Confirmation of system stability parameters and envelope is desired, but flight test evaluation is time consuming and costly. A simulation model validated for handling quality assessments would significantly reduce resourc...

  18. MIMO Hybrid Control of Structural Responses for Helicopter%直升机结构响应的多输入多输出混合控制

    Institute of Scientific and Technical Information of China (English)

    雷凌云; 顾仲权; 鲁民月

    2003-01-01

    对一种综合了自适应前馈与反馈控制的混合控制策略进行了拓展和研究,并将它应用于双频谐振激励下直升机舱座位处多目标点振动的控制仿真.在混合控制策略的实现中,提出了多输入多输出系统的以提高模态阻尼为目标的反馈控制器(AOEF)的型式和设计方法,以及针对闭环控制通道的FXLMS算法.在直升机有限元模型上用2个作动器控制4排座椅处的振动,仿真表明混合控制策略为直升机多通道的振动控制带来了性能上的显著提高.%A MIMO hybrid model of structural response control, which combines adaptive feedforward control and feedback control, was developed and then applied in a helicopter model to eliminate the dual-frequency harmonious vibration at cabin seats. In implementation, an AOEF (Acceleration Output Extended Feedback) controller for the MIMO case was designed to add enough damping to the control path so that the convergence rate of the FXLMS algorithm could be obviously improved. The corresponding FXLMS algorithm for the control path of closed loop was developed also. The numerical results on the finite element model of a helicopter indicated that with hybrid control, responses at four rows of seats could be controlled with two actuators and the adaptive controllers got a quicker convergence rate.

  19. Modern digital flight control system design for VTOL aircraft

    Science.gov (United States)

    Broussard, J. R.; Berry, P. W.; Stengel, R. F.

    1979-01-01

    Methods for and results from the design and evaluation of a digital flight control system (DFCS) for a CH-47B helicopter are presented. The DFCS employed proportional-integral control logic to provide rapid, precise response to automatic or manual guidance commands while following conventional or spiral-descent approach paths. It contained altitude- and velocity-command modes, and it adapted to varying flight conditions through gain scheduling. Extensive use was made of linear systems analysis techniques. The DFCS was designed, using linear-optimal estimation and control theory, and the effects of gain scheduling are assessed by examination of closed-loop eigenvalues and time responses.

  20. Design study of a feedback control system for the Multicyclic Flap System rotor (MFS)

    Science.gov (United States)

    Weisbrich, R.; Perley, R.; Howes, H.

    1977-01-01

    The feasibility of automatically providing higher harmonic control to a deflectable control flap at the tip of a helicopter rotor blade through feedback of selected independent parameter was investigated. Control parameters were selected for input to the feedback system. A preliminary circuit was designed to condition the selected parameters, weigh limiting factors, and provide a proper output signal to the multi-cyclic control actuators. Results indicate that feedback control for the higher harmonic is feasible; however, design for a flight system requires an extension of the present analysis which was done for one flight condition - 120 kts, 11,500 lbs gross weight and level flight.

  1. Heavy Lift Helicopter Flight Control System. Volume III. Automatic Flight Control System Development and Feasibility Demonstration

    Science.gov (United States)

    1977-09-01

    e3 1. Ilax(s xc(Ti- ticacl F""(-1 v d lwit.h1 ve’rn~ier "I ,, ,,C on tr(, I ca pib 1 I i Ly. Two Si gn-i f icant crnet;resi I t. n; m: hi’ hallI ln m...I ’)%%IlT UDIN& 05. All ITIC. i 0 4E VOSIT lt rI134c14(SI 0* ____. .. - ERAL LEFT FOI YIll ON" 0 5 10 15 205 50 so 40 TIME (EC tOSI

  2. 78 FR 60186 - Airworthiness Directives; AgustaWestland S.p.A. (Agusta) Helicopters

    Science.gov (United States)

    2013-10-01

    ... (AD) for Agusta Model AB139 and AW139 helicopters. This AD requires deactivating the Full Icing Protection System (FIPS) and installing a placard next to the FIPS controller stating that flight into known... views. We also invite comments relating to the economic, environmental, energy, or federalism...

  3. Progress in helicopter infrared signature suppression

    Directory of Open Access Journals (Sweden)

    Zhang Jingzhou

    2014-04-01

    Full Text Available Due to their low-attitude and relatively low-speed fight profiles, helicopters are subjected to serious threats from radio, infrared (IR, visual, and aural detection and tracking. Among these threats, infrared detection and tracking are regarded as more crucial for the survivability of helicopters. In order to meet the requirements of infrared stealth, several different types of infrared suppressor (IRS for helicopters have been developed. This paper reviews contemporary developments in this discipline, with particular emphasis on infrared signature suppression, advances in mixer-ejectors and prediction for helicopters. In addition, several remaining challenges, such as advanced IRS, emissivity optimization technique, helicopter infrared characterization, etc., are proposed, as an initial guide and stimulation for future research. In the future, the comprehensive infrared suppression in the 3–5 μm and 8–14 μm bands will doubtfully become the emphasis of helicopter stealth. Multidisciplinary optimization of a complete infrared suppression system deserves further investigation.

  4. Research on Control Algorithm of Active Control of Structural Response for Helicopter Under Complex Disturbances Environment%复杂外扰下直升机结构响应主动控制算法研究

    Institute of Scientific and Technical Information of China (English)

    陆洋; 邓轲骞

    2012-01-01

    In order to solve the problem that the convergence speed of the adaptive filtering algorithm with online secondary path modeling in time domain becomes lower, sometimes even become divergence, which occurred in the research of active vibration control of helicopter under complex disturbances environment. Based on the original algorithm , a variable step size was used instead of the fixed one to increase the speed of convergence. And a weight -constrained filtered - x LMS algorithm was used to reducing the influence of disturbances to the secondary path. Simulations have been conducted based on the finite element model of free - free beam. Results show that the two proposed methods are able to enhance the ability of active vibration control system for helicopter with complex disturbances effectively, as the basis for further study.%为了解决在直升机结构响应主动控制飞行试验中出现的控制算法在复杂外扰环境中收敛速度较慢、易受外扰影响而导致控制发散等问题,在原有算法基础上,提出采用变步长因子法以提高算法收敛速度,同时增强其对于时变情况的跟踪能力;采用添加约束权函数方法来降低各类干扰信号如量测干扰等对算法稳定性的不利影响.用自由-自由梁机体模型在有限元软件上对改进算法的可行性进行了仿真.仿真结果表明,改进算法能有效改善在复杂外扰影响下直升机稳定性控制的效果,为进一步开展试验验证研究奠定了良好的基础.

  5. 78 FR 52410 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

    Science.gov (United States)

    2013-08-23

    ..., separation of tail rotor parts, severe vibration, and subsequent loss of control of the helicopter. DATES... Deutschland GmbH Helicopters AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY..., MBB-BK 117 B-1, MBB-BK-117 B-2, and MBB-BK 117 C-1 helicopters to require inspections for corrosion...

  6. Dual-Actuator Active Vibration-Control System

    Science.gov (United States)

    Kascak, Albert F.; Kiraly, Louis J.; Montague, Gerald T.; Palazzolo, Alan B.; Manchala, Daniel

    1994-01-01

    Dual-actuator active vibration-control (DAAVC) system is developmental system of type described in "Active Vibration Dampers for Rotating Machinery" (LEW-15427). System features sensors and actuators positioned and oriented at bearings to measure and counteract vibrations of shaft along either of two axes perpendicular to axis of rotation. Effective in damping vibrations of helicopter-engine test stand, making it safer to operate engine at speeds near and above first resonance of engine/test-stand system. Opens new opportunities for engine designers to draw more power from engine, and concept applicable to other rotating machines.

  7. Application of the ABC helicopter to the emergency medical service role

    Science.gov (United States)

    Levine, L. S.

    1981-01-01

    Attention is called to the use of helicopters in transporting the sick and injured to medical facilities. It is noted that the helicopter's speed of response and delivery increases patient survival rates and may reduce the cost of medical care and its burden on society. Among the vehicle characteristics desired for this use are a cruising speed of 200 knots, a single engine hover capability at 10,000 ft, and an absence of a tail rotor. Three designs for helicopters incorporating such new technologies as digital/optical control systems, all composite air-frames, and third-generation airfoils are presented. A sensitivity analysis is conducted to show the effect of design speed, mission radius, and single engine hover capability on vehicle weight, fuel consumption, operating costs, and productivity.

  8. Model-Based Control using Model and Mechanization Fusion Techniques for Image-Aided Navigation

    Science.gov (United States)

    2009-03-01

    sized helicopter, LQG control has also been utilized in controlling the same type of vehicle. Zhe Jiang, Jianda Han, Yuechao Wang , and Qi Song, from the...Han J. Wang Y., Z. and Q. Song. “Enhanced LQR Control for Unmanned Helicopter in Hover”. Proceedings of Systems and Control in Aerospace and As

  9. 76 FR 35334 - Airworthiness Directives; Bell Helicopter Textron, Inc. Model 205A, 205A-1, 205B, 212, 412, 412CF...

    Science.gov (United States)

    2011-06-17

    ... directive (AD) for the specified Bell Helicopter Textron, Inc. (BHT) model helicopters with tail rotor (T R.... SUPPLEMENTARY INFORMATION: This amendment adopts a new AD for the specified BHT model helicopters with an... blade, and subsequent loss of control of the helicopter. We have reviewed the following BHT Alert...

  10. Artificial Icing Test, Utility Tactical Transport Aircraft System (UTTAS), Boeing Vertol YUH-61A Helicopter

    Science.gov (United States)

    1977-01-01

    or approval of the use of the commercial hardware and software . L IL UNCLASSIFIED SECURITY CLASSIFICATION OF: THIS PAGE ("Oen flea. nt REPORT...gravity normal acceleration Copilot/ Enineer Station Instrumentation controls and lights On-board camera controls and lights Data recorder switch Event

  11. Dynamic Analysis of a Helicopter Rotor by Dymore Program

    Science.gov (United States)

    Doğan, Vedat; Kırca, Mesut

    The dynamic behavior of hingeless and bearingless blades of a light commercial helicopter which has been under design process at ITU (İstanbul Technical University, Rotorcraft Research and Development Centre) is investigated. Since the helicopter rotor consists of several parts connected to each other by joints and hinges; rotors in general can be considered as an assembly of the rigid and elastic parts. Dynamics of rotor system in rotation is complicated due to coupling of elastic forces (bending, torsion and tension), inertial forces, control and aerodynamic forces on the rotor blades. In this study, the dynamic behavior of the rotor for a real helicopter design project is analyzed by using DYMORE. Blades are modeled as elastic beams, hub as a rigid body, torque tubes as rigid bodies, control links as rigid bodies plus springs and several joints. Geometric and material cross-sectional properties of blades (Stiffness-Matrix and Mass-Matrix) are calculated by using VABS programs on a CATIA model. Natural frequencies and natural modes of the rotating (and non-rotating) blades are obtained by using DYMORE. Fan-Plots which show the variation of the natural frequencies for different modes (Lead-Lag, Flapping, Feathering, etc.) vs. rotor RPM are presented.

  12. Control of an Autonomous Radio-Controlled Helicopter in a Modified Simulation Environment Using Proportional Integral Derivative Algorithms

    Science.gov (United States)

    2008-06-01

    outputs, even when tracking a single position, maintaining hover without GPS can be considered useful under short-term conditions. All PID controllers also...user can deduce that his or her initial hunch was wrong and look elsewhere for a solution. 4. Key Flight Modes 4.1 Trim State Although PID ... controllers will eventually settle into a final value after receiving stable gains, there may still be errors present even with a strong Ki term. As such

  13. 基于虚拟仪器技术的直升机电源试验系统设计%Design of helicopter power supply test system based on virtual instrument technology

    Institute of Scientific and Technical Information of China (English)

    陈超; 黄建; 梁旭

    2016-01-01

    At present ,there are still many problems in the helicopter power supply testing ,such as multiple test items , complex test equipment ,long test period and so on .If virtual instrument technology is applied to the design of the heli-copter power supply test system ,it would improve the test efficiency and shorten the test period .The test system de-signed in this paper use the PLC to control the switch of power supply circuits and test programs ,use the signal condi-tioning circuits and PXI devices to acquire data ,use the software developed on the CVI platform to analysis and display the data dynamically .In addition ,relevant assessment strategies are used for the evaluation of specified performance and comprehensive performance .The test system can provide technical support and scientific basis for the use and mainte-nance of the helicopter power system ,possessing a good application value .%目前 ,直升机电源系统的测试面临着测试项目多、测试设备复杂、测试周期长等诸多问题 ,如果将虚拟仪器技术应用于直升机电源测试系统的设计 ,将大大的提高测试效率和缩短测试周期.设计的测试系统通过PLC来控制供电电路的切换和测试项目的转换 ,用信号调理电路和PXI板卡来实现数据的采集 ,在CVI平台上开发软件来实现数据的分析、处理和动态显示 ,并且利用相关评估策略对电源系统指定性能和综合性能进行了评估.该试验系统能够为直升机电源系统的使用和维修等环节提供技术支持和科学依据 ,有很好的应用价值.

  14. Geometric optimisation of a gurney flap henge-less deployment system for a helicopter model blade

    NARCIS (Netherlands)

    Paternoster, A.R.A.; Loendersloot, R.; Boer, de A.; Akkerman, R.

    2011-01-01

    Following a comparative study on shape morphing and adaptive systems to improve rotorcraft efficiency, the Green Rotorcraft consortium has selected the Gurney flap technology as demonstrator of a smart adaptive rotorblade within the Clean Sky Joint Technology Initiative [1]. The aim of such a system

  15. Geometric optimisation of a gurney flap hinge-less deployment system for a helicopter model blade

    NARCIS (Netherlands)

    Paternoster, Alexandre; Loendersloot, Richard; de Boer, Andries; Akkerman, Remko

    2011-01-01

    Following a comparative study on shape morphing and adaptive systems to improve rotorcraft efficiency, the Green Rotorcraft consortium has selected the Gurney flap technology as demonstrator of a smart adaptive rotorblade within the Clean Sky Joint Technology Initiative [1]. The aim of such a system

  16. Ergonomics, safety, and resilience in the helicopter offshore transportation system of Campos Basin.

    Science.gov (United States)

    Gomes, José Orlando; Huber, Gilbert J; Borges, Marcos R S; de Carvalho, Paulo Victor R

    2015-01-01

    Air transportation of personnel to offshore oil platforms is one of the major hazards of this kind of endeavor. Pilot performance is a key factor in the safety of the transportation system. This study seeks to identify the ergonomic factors present in pilots' activities that may in some way compromise or enhance their performance, the constraints and affordances which they are subject to; and where possible to link these to their associated risk factors. Methodology adopted in this project studies work in its context. It is a merging of Activity Analysis (Guerin et al. 2001) of European tradition with Cognitive Task Analysis (CTA - www.ctaresource.com) articulated with the recent approaches to cognitive systems engineering developed by Professors David Woods and Erik Hollnagel. Fifty-five hours of field interviews provided the input for analysis. Sixteen ergonomic constraints were identified, some cognitive, some physical, all considered relevant by the research subjects and expert advisers. Although the safety record of the personnel transportation system studied is considered acceptable, there is low hanging fruit to be picked which can help improve the system's safety.

  17. Natural gas has an optical fingerprint. CHARM {sup registered}, the helicopter-borne remote gas detection system; Erdgas hat einen optischen Fingerabdruck. CHARM {sup registered}, das hubschraubergetragene Gasferndetektionssystem

    Energy Technology Data Exchange (ETDEWEB)

    Zirnig, W.; Kordulla, K. [E.ON Ruhrgas, Dorsten (Germany); Ulbricht, M. [Adlares GmbH, Teltow (Germany)

    2005-11-01

    Together with the German Aerospace Centre DLR and the laser company Adlares, E.ON Ruhrgas AG has developed a novel infrared laser remote gas sensing system which can be used during aerial inspections by helicopter to check natural gas pipelines for tightness, as required by law particularly in built-up areas. Based on geographic information systems with digital maps containing detailed data on pipeline routes, and in combination with the satellite reference service Ascos, which provides Germany-wide reference data for highly accurate satellite-based surveying, a precise automatic navigation was supplied for the remote gas detection system. Thus, CHARM offers new efficient ways of looking after natural gas pipeline systems. (orig.)

  18. TORSIONAL VIBRATION ANALYSIS FOR A HELICOPTER TRANSMISSION SYSTEM%直升机传动系统扭转振动的分析

    Institute of Scientific and Technical Information of China (English)

    许兆棠

    2012-01-01

    In order to obtain the characteristics of the torsional vibration of a helicopter transmission system, a calculation of the torsional vibration is carried out. The transmission system is divided into the subsystems of shaft segment and disks, based on a simplified structure of the transmission system. The solution of the torsional vibration can be obtained using the modal superposition method, The torsional frequency response function of a helicopter transmission system is analyzed. The result shows that there is the extreme value of amplitude of a torsional frequency response function near low order torsional nature frequencies. When the same order torsional resonance is produced in a helicopter transmission system by excitation parts with different frequencies, the rotation speed of an engine is unequal. The larger transmission ratio from an engine to excitation parts is, the higher rotation speed of an engine is. When torsional resonance of a transmission system is caused by a rotor, the rotation speed of an engine is the largest in the same order torsional resonance.%为了获得直升机传动系统扭转振动的特性,对直升机传动系统的扭转振动进行了计算和分析。在简化传动系统结构的基础上,将直升机传动系统划分为若干个轴段和圆盘的子系统,根据振型叠加原理,得到了直升机传动系统扭转振动的解,分析了传动系统的扭转频响函数。结果表明:传动系统扭转频响函数幅值的峰值出现在低阶固有频率附近;不同频率激振源的部件引起传动系统同阶扭转共振时,发动机的转速不等,发动机到激振源部件的传动比大,发动机的转速高;在同阶扭转共振中,桨叶引起传动系统扭转共振时,发动机的转速最高。

  19. Feedback Control of Rotor Overspeed

    Science.gov (United States)

    Churchill, G. B.

    1984-01-01

    Feedback system for automatically governing helicopter rotor speed promises to lessen pilot's workload, enhance maneuverability, and protect airframe. With suitable modifications, concept applied to control speed of electrical generators, automotive engines and other machinery.

  20. Fuzzy logic mode switching in helicopters

    Science.gov (United States)

    Sherman, Porter D.; Warburton, Frank W.

    1993-01-01

    The application of fuzzy logic to a wide range of control problems has been gaining momentum internationally, fueled by a concentrated Japanese effort. Advanced Research & Development within the Engineering Department at Sikorsky Aircraft undertook a fuzzy logic research effort designed to evaluate how effective fuzzy logic control might be in relation to helicopter operations. The mode switching module in the advanced flight control portion of Sikorsky's motion based simulator was identified as a good candidate problem because it was simple to understand and contained imprecise (fuzzy) decision criteria. The purpose of the switching module is to aid a helicopter pilot in entering and leaving coordinated turns while in flight. The criteria that determine the transitions between modes are imprecise and depend on the varied ranges of three flight conditions (i.e., simulated parameters): Commanded Rate, Duration, and Roll Attitude. The parameters were given fuzzy ranges and used as input variables to a fuzzy rulebase containing the knowledge of mode switching. The fuzzy control program was integrated into a real time interactive helicopter simulation tool. Optimization of the heading hold and turn coordination was accomplished by interactive pilot simulation testing of the handling quality performance of the helicopter dynamic model. The fuzzy logic code satisfied all the requirements of this candidate control problem.

  1. 基于GA辨识模型的小型无人直升机航向姿态控制器的设计%GA Identification Model-based Controller Design for Yaw Channel of Small-scale Helicopter

    Institute of Scientific and Technical Information of China (English)

    赵志刚; 苟向锋; 王赓; 吕恬生

    2012-01-01

    分析了小型无人直升机的航向模型结构,用一种基于遗传算法(GA)的方法辨识得到模型结构和参数.根据所建模型设计了一款航向姿态控制器,整定了该类控制器参数.最后基于安全性和方便性考虑制作了一款地面飞行实验台架,在台架上利用所设计的控制器控制小型直升机的航向姿态,获得了较好的控制效果.%The model structure of small-scale helicopter's yaw channel is analyzed and the transfer characteristics model of robot helicopter is identified by using a GA-based identification method. Based on the proposed model, a kind of gesture controller is designed and the controller paramters are regulated. In order to take safety and convernience into account,a ground stand has been designed and produced. Whereafter the helicopter is fixed on the stand and is controlled to hovering using the resulted controller. The results reveal that the control effect is very good.

  2. Passive suppression of helicopter ground resonance using nonlinear energy sinks attached on the helicopter blades

    Science.gov (United States)

    Bergeot, B.; Bellizzi, S.; Cochelin, B.

    2017-03-01

    This paper investigates the passive control of a rotor instability named helicopter Ground Resonance (GR). The passive device consists of a set of essential cubic nonlinear absorbers named Nonlinear Energy Sinks (NES) each of them positioned on a blade. A dynamic model reproducing helicopter GR instability is presented and transformed to a time-invariant nonlinear system using a multi-blade coordinate transformation based on Fourier transform mapping the dynamic state variables into a non-rotating reference frame. Combining complexification, slow/fast partition of the dynamics and averaging procedure, a reduced model is obtained which allowed us to use the so-called geometric singular perturbation analysis to characterize the steady state response regimes. As in the case of a NES attached to the fuselage, it is shown that under suitable conditions, GR instability can be completely suppressed, partially suppressed through periodic response or strongly modulated response. Relevant analytical results are compared, for validation purposes, to direct integration of the reference and reduced models.

  3. Control system design method

    Science.gov (United States)

    Wilson, David G [Tijeras, NM; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  4. Control Law Design for Twin Rotor MIMO System with Nonlinear Control Strategy

    Directory of Open Access Journals (Sweden)

    M. Ilyas

    2016-01-01

    Full Text Available Modeling of complex air vehicles is a challenging task due to high nonlinear behavior and significant coupling effect between rotors. Twin rotor multi-input multioutput system (TRMS is a laboratory setup designed for control experiments, which resembles a helicopter with unstable, nonlinear, and coupled dynamics. This paper focuses on the design and analysis of sliding mode control (SMC and backstepping controller for pitch and yaw angle control of main and tail rotor of the TRMS under parametric uncertainty. The proposed control strategy with SMC and backstepping achieves all mentioned limitations of TRMS. Result analysis of SMC and backstepping control schemes elucidates that backstepping provides efficient behavior with the parametric uncertainty for twin rotor system. Chattering and oscillating behaviors of SMC are removed with the backstepping control scheme considering the pitch and yaw angle for TRMS.

  5. Distributed computer control systems

    Energy Technology Data Exchange (ETDEWEB)

    Suski, G.J.

    1986-01-01

    This book focuses on recent advances in the theory, applications and techniques for distributed computer control systems. Contents (partial): Real-time distributed computer control in a flexible manufacturing system. Semantics and implementation problems of channels in a DCCS specification. Broadcast protocols in distributed computer control systems. Design considerations of distributed control architecture for a thermal power plant. The conic toolset for building distributed systems. Network management issues in distributed control systems. Interprocessor communication system architecture in a distributed control system environment. Uni-level homogenous distributed computer control system and optimal system design. A-nets for DCCS design. A methodology for the specification and design of fault tolerant real time systems. An integrated computer control system - architecture design, engineering methodology and practical experience.

  6. Application of higher harmonic blade feathering on the OH-6A helicopter for vibration reduction

    Science.gov (United States)

    Straub, F. K.; Byrns, E. V., Jr.

    1986-01-01

    The design, implementation, and flight test results of higher harmonic blade feathering for vibration reduction on the OH-6A helicopter are described. The higher harmonic control (HHC) system superimposes fourth harmonic inputs upon the stationary swashplate. These inputs are transformed into 3P, 4P and 5P blade feathering angles. This results in modified blade loads and reduced fuselage vibrations. The primary elements of this adaptive vibration suppression system are: (1) acceleration transducers sensing the vibratory response of the fuselage; (2) a higher harmonic blade pitch actuator system; (3) a flightworthy microcomputer, incorporating the algorithm for reducing vibrations, and (4) a signal conditioning system, interfacing between the sensors, the microcomputer and the HHC actuators. The program consisted of three distinct phases. First, the HHC system was designed and implemented on the MDHC OH-6A helicopter. Then, the open loop, or manual controlled, flight tests were performed, and finally, the closed loop adaptive control system was tested. In 1983, one portion of the closed loop testing was performed, and in 1984, additional closed loop tests were conducted with improved software. With the HHC system engaged, the 4P pilot seat vibration levels were significantly lower than the baseline ON-6A levels. Moreover, the system did not adversely affect blade loads or helicopter performance. In conclusion, this successful proof of concept project demonstrated HHC to be a viable vibration suppression mechanism.

  7. GARTEUR Helicopter Cooperative Research

    OpenAIRE

    Pahlke, Klausdieter

    2010-01-01

    This paper starts with an overview about the general structure of the Group for Aeronautical Research and Technology in EURope (GARTEUR). The focus is on the activities related to rotorcraft which are managed in the GARTEUR Helicopter Group of Responsables (HC GoR). The research activities are carried out in so-called Action Groups. Out of the 5 Action Groups which ended within the last four years results generated in the Helicopter Action Groups HC(AG14) “Methods for Refinement of Structural...

  8. 75 FR 48617 - Airworthiness Directives; Eurocopter Deutschland GmbH (ECD) Model MBB-BK 117 C-2 Helicopters

    Science.gov (United States)

    2010-08-11

    ... vibration, and subsequent loss of control of the helicopter. Actions and Compliance (e) Before further... Deutschland GmbH (ECD) Model MBB-BK 117 C-2 Helicopters AGENCY: Federal Aviation Administration (FAA), DOT... directive (AD) for ECD Model MBB-BK 117 C-2 helicopters. This proposed AD results from a...

  9. 75 FR 66657 - Airworthiness Directives; Eurocopter Deutschland GmbH Model MBB-BK 117 C-2 Helicopters

    Science.gov (United States)

    2010-10-29

    ... separation of dynamic weights, severe vibration, and subsequent loss of control of the helicopter. Actions... Deutschland GmbH Model MBB- BK 117 C-2 Helicopters AGENCY: Federal Aviation Administration, DOT. ACTION: Final... Deutschland GmbH (ECD) Model MBB BK 117 C-2 helicopters. This amendment results from a mandatory...

  10. 29 CFR 1910.183 - Helicopters.

    Science.gov (United States)

    2010-07-01

    ... the system with the employees in advance of hoisting the load. This applies to both radio and hand... instruct employees, and shall ensure, that whenever approaching or leaving a helicopter which has its... employer shall ensure its use by employees receiving the load. Personal protective equipment shall...

  11. Simulating effectiveness of helicopter evasive manoeuvres to RPG attack

    Science.gov (United States)

    Anderson, D.; Thomson, D. G.

    2010-04-01

    The survivability of helicopters under attack by ground troops using rocket propelled grenades has been amply illustrated over the past decade. Given that an RPG is unguided and it is infeasible to cover helicopters in thick armour, existing optical countermeasures are ineffective - the solution is to compute an evasive manoeuvre. In this paper, an RPG/helicopter engagement model is presented. Manoeuvre profiles are defined in the missile approach warning sensor camera image plane using a local maximum acceleration vector. Required control inputs are then computed using inverse simulation techniques. Assessments of platform survivability to several engagement scenarios are presented.

  12. Flight dynamics model and system identification of longitudinal and lateral channels for a small-scale coaxial helicopter%小型共轴式直升机纵横向动力学建模与辨识

    Institute of Scientific and Technical Information of China (English)

    聂资; 陈铭; 李仁府

    2012-01-01

    Using perturbation approach, a linearized flight dynamics model was formulated for the non-linear coaxial helicopter flight control problem. Based on mathematical parametric model of the rotorcraft, the system identification model was obtained by utilizing the input and output data of longitudinal and lateral channel in flight test. The analysis and validation of the above two models in the time domain was given by computer simulation. The stability derivatives, control derivatives and the system eigenvalues were computed for the stability analysis of the helicopter. Results show that the mathematical model can reflect the dynamic characteristics of the longitudinal and lateral channels, based on which the system identification model can be a mathematical model for autonomous flight control system design.%运用经典的叶素法和一阶谐波理论,建立了悬停状态下某小型共轴式直升机纵横向通道的理论计算模型;同时根据飞行试验中采集的直升机输入输出数据,以参数化理论模型为基础,运用系统辨识的方法得到了该机纵横向通道模型.通过计算机仿真,分别对理论计算模型和系统辨识模型进行了时域验证和分析,并比较了2种模型的稳定性导数、操纵导数及特征根,对该直升机的稳定性进行了分析.研究表明:所建立的小型共轴式直升机纵横向通道的理论计算模型能够反映该机悬停状态下纵横向通道的动态特性,以此为基础建立的系统辨识模型可以作为飞行控制系统纵横向通道控制的数学模型.

  13. Control System Damps Vibrations

    Science.gov (United States)

    Kopf, E. H., Jr.; Brown, T. K.; Marsh, E. L.

    1983-01-01

    New control system damps vibrations in rotating equipment with help of phase-locked-loop techniques. Vibrational modes are controlled by applying suitable currents to drive motor. Control signals are derived from sensors mounted on equipment.

  14. Controllability of Quantum Systems

    CERN Document Server

    Schirmer, S G; Solomon, A I

    2003-01-01

    An overview and synthesis of results and criteria for open-loop controllability of Hamiltonian quantum systems obtained using Lie group and Lie algebra techniques is presented. Negative results for open-loop controllability of dissipative systems are discussed, and the superiority of closed-loop (feedback) control for quantum systems is established.

  15. Multicenter observational prehospital resuscitation on helicopter study.

    Science.gov (United States)

    Holcomb, John B; Swartz, Michael D; DeSantis, Stacia M; Greene, Thomas J; Fox, Erin E; Stein, Deborah M; Bulger, Eileen M; Kerby, Jeffrey D; Goodman, Michael; Schreiber, Martin A; Zielinski, Martin D; O'Keeffe, Terence; Inaba, Kenji; Tomasek, Jeffrey S; Podbielski, Jeanette M; Appana, Savitri N; Yi, Misung; Wade, Charles E

    2017-07-01

    Earlier use of in-hospital plasma, platelets, and red blood cells (RBCs) has improved survival in trauma patients with severe hemorrhage. Retrospective studies have associated improved early survival with prehospital blood product transfusion (PHT). We hypothesized that PHT of plasma and/or RBCs would result in improved survival after injury in patients transported by helicopter. Adult trauma patients transported by helicopter from the scene to nine Level 1 trauma centers were prospectively observed from January to November 2015. Five helicopter systems had plasma and/or RBCs, whereas the other four helicopter systems used only crystalloid resuscitation. All patients meeting predetermined high-risk criteria were analyzed. Patients receiving PHT were compared with patients not receiving PHT. Our primary analysis compared mortality at 3 hours, 24 hours, and 30 days, using logistic regression to adjust for confounders and site heterogeneity to model patients who were matched on propensity scores. Twenty-five thousand one hundred eighteen trauma patients were admitted, 2,341 (9%) were transported by helicopter, of which 1,058 (45%) met the highest-risk criteria. Five hundred eighty-five of 1,058 patients were flown on helicopters carrying blood products. In the systems with blood available, prehospital median systolic blood pressure (125 vs 128) and Glasgow Coma Scale (7 vs 14) was significantly lower, whereas median Injury Severity Score was significantly higher (21 vs 14). Unadjusted mortality was significantly higher in the systems with blood products available, at 3 hours (8.4% vs 3.6%), 24 hours (12.6% vs 8.9%), and 30 days (19.3% vs 13.3%). Twenty-four percent of eligible patients received a PHT. A median of 1 unit of RBCs and plasma were transfused prehospital. Of patients receiving PHT, 24% received only plasma, 7% received only RBCs, and 69% received both. In the propensity score matching analysis (n = 109), PHT was not significantly associated with mortality

  16. Analysis of Vibratory Excitation of Gear Systems as a Contributor to Aircraft Interior Noise. [helicopter cabin noise

    Science.gov (United States)

    Mark, W. D.

    1979-01-01

    Application of the transfer function approach to predict the resulting interior noise contribution requires gearbox vibration sources and paths to be characterized in the frequency domain. Tooth-face deviations from perfect involute surfaces were represented in terms of Legendre polynomials which may be directly interpreted in terms of tooth-spacing errors, mean and random deviations associated with involute slope and fullness, lead mismatch and crowning, and analogous higher-order components. The contributions of these components to the spectrum of the static transmission error is discussed and illustrated using a set of measurements made on a pair of helicopter spur gears. The general methodology presented is applicable to both spur and helical gears.

  17. Performance and Vibration Analyses of Lift-Offset Helicopters

    Directory of Open Access Journals (Sweden)

    Jeong-In Go

    2017-01-01

    Full Text Available A validation study on the performance and vibration analyses of the XH-59A compound helicopter is conducted to establish techniques for the comprehensive analysis of lift-offset compound helicopters. This study considers the XH-59A lift-offset compound helicopter using a rigid coaxial rotor system as a verification model. CAMRAD II (Comprehensive Analytical Method of Rotorcraft Aerodynamics and Dynamics II, a comprehensive analysis code, is used as a tool for the performance, vibration, and loads analyses. A general free wake model, which is a more sophisticated wake model than other wake models, is used to obtain good results for the comprehensive analysis. Performance analyses of the XH-59A helicopter with and without auxiliary propulsion are conducted in various flight conditions. In addition, vibration analyses of the XH-59A compound helicopter configuration are conducted in the forward flight condition. The present comprehensive analysis results are in good agreement with the flight test and previous analyses. Therefore, techniques for the comprehensive analysis of lift-offset compound helicopters are appropriately established. Furthermore, the rotor lifts are calculated for the XH-59A lift-offset compound helicopter in the forward flight condition to investigate the airloads characteristics of the ABC™ (Advancing Blade Concept rotor.

  18. Classification analysis of vibration data from SH-60B Helicopter Transmission Test Facility

    OpenAIRE

    Anderson, Gregory L.

    1997-01-01

    Approved for public release; distribution is unlimited Health and Usage Monitoring Systems (HUMS) is an emerging technology in helicopter aviation. The United States Navy is evaluating its viability for use on its helicopter fleet. HUMS uses sensors placed throughout the helicopter to monitor and record vibration signals and numerous other aircraft operating parameters. This thesis evaluates the vibration signals recorded by a HUMS system using a statistical technique called tree structure...

  19. Investigation of rotor control system loads

    Institute of Scientific and Technical Information of China (English)

    Sun Tao; Tan Jianfeng; Wang Haowen

    2013-01-01

    This paper concentrates on the aeroelasticity analysis of rotor blade and rotor control systems. A new multi-body dynamics model is established to predict both rotor pitch link loads and swashplate servo loads. Two helicopter rotors of UH-60A and SA349/2, both operating in two critical flight conditions, high-speed flight and high-thrust flight, are studied. The analysis shows good agreements with the flight test data and the calculation results using CAMRAD II. The mechanisms of rotor control loads are then analyzed in details based on the present predictions and the flight test data. In high-speed conditions, the pitch link loads are dominated by the integral of blade pitching moments, which are generated by cyclic pitch control. In high-thrust conditions, the positive pitching loads in the advancing side are caused by high collective pitch angle, and dynamic stall in the retreating side excites high-frequency responses. The swashplate servo loads are predominated by the rotor pitch link loads, and the inertia of the swashplate has significant effects on high-frequency harmonics of the servo loads.

  20. Digital Optical Control System

    Science.gov (United States)

    Jordan, David H.; Tipton, Charles A.; Christmann, Charles E.; Hochhausler, Nils P.

    1988-09-01

    We describe the digital optical control system (DOGS), a state-of-the-art controller for electrical feedback in an optical system. The need for a versatile optical controller arose from a number of unique experiments being performed by the Air Force Weapons Laboratory. These experiments use similar detectors and actuator-controlled mirrors, but the control requirements vary greatly. The experiments have in common a requirement for parallel control systems. The DOGS satisfies these needs by allowing several control systems to occupy a single chassis with one master controller. The architecture was designed to allow upward compatibility with future configurations. Combinations of off-the-shelf and custom boards are configured to meet the requirements of each experiment. The configuration described here was used to control piston error to X/80 at a wavelength of 0.51 Am. A peak sample rate of 8 kHz, yielding a closed loop bandwidth of 800 Hz, was achieved.

  1. Discrete Control Systems

    CERN Document Server

    Lee, Taeyoung; McClamroch, N Harris

    2007-01-01

    Discrete control systems, as considered here, refer to the control theory of discrete-time Lagrangian or Hamiltonian systems. These discrete-time models are based on a discrete variational principle, and are part of the broader field of geometric integration. Geometric integrators are numerical integration methods that preserve geometric properties of continuous systems, such as conservation of the symplectic form, momentum, and energy. They also guarantee that the discrete flow remains on the manifold on which the continuous system evolves, an important property in the case of rigid-body dynamics. In nonlinear control, one typically relies on differential geometric and dynamical systems techniques to prove properties such as stability, controllability, and optimality. More generally, the geometric structure of such systems plays a critical role in the nonlinear analysis of the corresponding control problems. Despite the critical role of geometry and mechanics in the analysis of nonlinear control systems, non...

  2. ALFA Detector Control System

    CERN Document Server

    Oleiro Seabra, Luis Filipe; The ATLAS collaboration

    2015-01-01

    ALFA (Absolute Luminosity For ATLAS) is one of the sub-detectors of ATLAS/LHC. The ALFA system is composed by two stations installed in the LHC tunnel 240 m away from each side of the ATLAS interaction point. Each station has a vacuum and ventilation system, movement control and all the required electronic for signal processing. The Detector Control System (DCS) provides control and monitoring of several components and ensures the safe operation of the detector contributing to good Data Quality. This paper describes the ALFA DCS system including a detector overview, operation aspects and hardware control through a SCADA system, WinCC OA.

  3. ALFA Detector Control System

    CERN Document Server

    Oleiro Seabra, Luis Filipe; The ATLAS collaboration

    2015-01-01

    ALFA (Absolute Luminosity For ATLAS) is one of the sub-detectors of ATLAS (A Toroidal LHC Apparatus). The ALFA system is composed by four stations installed in the LHC tunnel 240 m away from the ATLAS interaction point. Each station has a vacuum and ventilation system, movement control and all the required electronics for signal processing. The Detector Control System (DCS) provides control and monitoring of several components and ensures the safe operation of the detector contributing to good Data Quality. This paper describes the ALFA DCS system including a detector overview, operation aspects and hardware control through a SCADA system, WinCC OA.

  4. Active vibration attenuating seat suspension for an armored helicopter crew seat

    Science.gov (United States)

    Sztein, Pablo Javier

    An Active Vibration Attenuating Seat Suspension (AVASS) for an MH-60S helicopter crew seat is designed to protect the occupants from harmful whole-body vibration (WBV). Magnetorheological (MR) suspension units are designed, fabricated and installed in a helicopter crew seat. These MR isolators are built to work in series with existing Variable Load Energy Absorbers (VLEAs), have minimal increase in weight, and maintain crashworthiness for the seat system. Refinements are discussed, based on testing, to minimize friction observed in the system. These refinements include the addition of roller bearings to replace friction bearings in the existing seat. Additionally, semi-active control of the MR dampers is achieved using special purpose built custom electronics integrated into the seat system. Experimental testing shows that an MH-60S retrofitted with AVASS provides up to 70.65% more vibration attenuation than the existing seat configuration as well as up to 81.1% reduction in vibration from the floor.

  5. Controllability in nonlinear systems

    Science.gov (United States)

    Hirschorn, R. M.

    1975-01-01

    An explicit expression for the reachable set is obtained for a class of nonlinear systems. This class is described by a chain condition on the Lie algebra of vector fields associated with each nonlinear system. These ideas are used to obtain a generalization of a controllability result for linear systems in the case where multiplicative controls are present.

  6. Helicopter vibration isolation: Design approach and test results

    Science.gov (United States)

    Lee, C.-M.; Goverdovskiy, V. N.; Sotenko, A. V.

    2016-03-01

    This paper presents a strategy based on the approach of designing and inserting into helicopter vibration isolation systems mountable mechanisms with springs of adjustable sign-changing stiffness for system stiffness control. A procedure to extend the effective area of stiffness control is presented; a set of parameters for sensitivity analysis and practical mechanism design is formulated. The validity and flexibility of the approach are illustrated by application to crewmen seat suspensions and vibration isolators for equipment protection containers. The strategy provides minimization of vibrations, especially in the infra-low frequency range which is the most important for crewmen efficiency and safety of the equipment. This also would prevent performance degradation of some operating systems. The effectiveness is demonstrated through measured data obtained from development and parallel flight tests of new and operating systems.

  7. Motion control systems

    CERN Document Server

    Sabanovic, Asif

    2011-01-01

    "Presents a unified approach to the fundamental issues in motion control, starting from the basics and moving through single degree of freedom and multi-degree of freedom systems In Motion Control Systems, Šabanovic and Ohnishi present a unified approach to very diverse issues covered in motion control systems, offering know-how accumulated through work on very diverse problems into a comprehensive, integrated approach suitable for application in high demanding high-tech products. It covers material from single degree of freedom systems to complex multi-body non-redundant and redundant systems. The discussion of the main subject is based on original research results and will give treatment of the issues in motion control in the framework of the acceleration control method with disturbance rejection technique. This allows consistent unification of different issues in motion control ranging from simple trajectory tracking to topics related to haptics and bilateral control without and with delay in the measure...

  8. Overview: Applications of numerical optimization methods to helicopter design problems

    Science.gov (United States)

    Miura, H.

    1984-01-01

    There are a number of helicopter design problems that are well suited to applications of numerical design optimization techniques. Adequate implementation of this technology will provide high pay-offs. There are a number of numerical optimization programs available, and there are many excellent response/performance analysis programs developed or being developed. But integration of these programs in a form that is usable in the design phase should be recognized as important. It is also necessary to attract the attention of engineers engaged in the development of analysis capabilities and to make them aware that analysis capabilities are much more powerful if integrated into design oriented codes. Frequently, the shortcoming of analysis capabilities are revealed by coupling them with an optimization code. Most of the published work has addressed problems in preliminary system design, rotor system/blade design or airframe design. Very few published results were found in acoustics, aerodynamics and control system design. Currently major efforts are focused on vibration reduction, and aerodynamics/acoustics applications appear to be growing fast. The development of a computer program system to integrate the multiple disciplines required in helicopter design with numerical optimization technique is needed. Activities in Britain, Germany and Poland are identified, but no published results from France, Italy, the USSR or Japan were found.

  9. The scope of back pain in Navy helicopter pilots

    OpenAIRE

    Phillips, Andrea S.

    2011-01-01

    Approved for public release; distribution is unlimited. Human Systems Integration Report This thesis investigates issues such as long hours in the cockpit, ineffective seat padding, Night Vision Goggle (NVG) use, and the constant vibrations involved in flying rotary wing aircraft. Pain is subjective and severity is difficult to compare between individuals. Does back pain affect safety of flight? In the military helicopter aviator community, 60-80% of helicopter pilots are estimated ...

  10. Applied Control Systems Design

    CERN Document Server

    Mahmoud, Magdi S

    2012-01-01

    Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these e...

  11. 77 FR 5423 - Airworthiness Directives; Bell Helicopter Textron Canada, Limited (Bell) Helicopters

    Science.gov (United States)

    2012-02-03

    ... turbine outlet temperature (TOT) indicator over-temperature warning light, when illuminated, created glare... while using night vision goggles and to prevent subsequent loss of control of the helicopter. DATES: We.... Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New...

  12. 77 FR 36389 - Airworthiness Directives; Bell Helicopter Textron Canada, Limited, Helicopters

    Science.gov (United States)

    2012-06-19

    ... over-temperature warning light, when illuminated, created glare and reflections that could degrade the... prevent subsequent loss of control of the helicopter. DATES: This AD is effective July 24, 2012. ADDRESSES..., Southwest Region, 2601 Meacham Blvd., Room 663, Fort Worth, Texas 76137. Examining the AD Docket: You may...

  13. Control and optimization system

    Science.gov (United States)

    Xinsheng, Lou

    2013-02-12

    A system for optimizing a power plant includes a chemical loop having an input for receiving an input parameter (270) and an output for outputting an output parameter (280), a control system operably connected to the chemical loop and having a multiple controller part (230) comprising a model-free controller. The control system receives the output parameter (280), optimizes the input parameter (270) based on the received output parameter (280), and outputs an optimized input parameter (270) to the input of the chemical loop to control a process of the chemical loop in an optimized manner.

  14. Control systems engineering

    CERN Document Server

    Nise, Norman S

    1995-01-01

    This completely updated new edition shows how to use MATLAB to perform control-system calculations. Designed for the professional or engineering student who needs a quick and readable update on designing control systems, the text features a series of tightly focused examples that clearly illustrate each concept of designing control systems. Most chapters conclude with a detailed application from the two case studies that run throughout the book: an antenna asimuth control system and a submarine. The author also refers to many examples of design methods.

  15. Step Motor Control System

    Institute of Scientific and Technical Information of China (English)

    ZhangShuochengt; WangDan; QiaoWeimin; JingLan

    2003-01-01

    All kinds of step motors and servomotors are widely used in CSR control system, such as many vacuum valves control that set on the HIRFL-CSR; all kinds of electric switches and knobs of ECR Ion Source; equipment of CSR Beam Diagnostics and a lot of large equipment like Inside Gun Toroid and Collector Toroid of HIRFL. A typical control system include up to 32 16-I/O Control boards, and each 16-I/O Control board can control 4 motors at the same time (including 8 Limit Switches).

  16. MMW radar enhanced vision systems: the Helicopter Autonomous Landing System (HALS) and Radar-Enhanced Vision System (REVS) are rotary and fixed wing enhanced flight vision systems that enable safe flight operations in degraded visual environments

    Science.gov (United States)

    Cross, Jack; Schneider, John; Cariani, Pete

    2013-05-01

    Sierra Nevada Corporation (SNC) has developed rotary and fixed wing millimeter wave radar enhanced vision systems. The Helicopter Autonomous Landing System (HALS) is a rotary-wing enhanced vision system that enables multi-ship landing, takeoff, and enroute flight in Degraded Visual Environments (DVE). HALS has been successfully flight tested in a variety of scenarios, from brown-out DVE landings, to enroute flight over mountainous terrain, to wire/cable detection during low-level flight. The Radar Enhanced Vision Systems (REVS) is a fixed-wing Enhanced Flight Vision System (EFVS) undergoing prototype development testing. Both systems are based on a fast-scanning, threedimensional 94 GHz radar that produces real-time terrain and obstacle imagery. The radar imagery is fused with synthetic imagery of the surrounding terrain to form a long-range, wide field-of-view display. A symbology overlay is added to provide aircraft state information and, for HALS, approach and landing command guidance cuing. The combination of see-through imagery and symbology provides the key information a pilot needs to perform safe flight operations in DVE conditions. This paper discusses the HALS and REVS systems and technology, presents imagery, and summarizes the recent flight test results.

  17. 带有差分GPS的多传感器无人直升机航测遥感系统%An unmanned helicopter based mapping system with differential GPS and multi-Sensor

    Institute of Scientific and Technical Information of China (English)

    陈天恩; 长井正彦; 柴崎亮介

    2012-01-01

    Low-altitude UAV( Unmanned Aerial Vehicles) based mapping system is a new type of spatial information acquisition and processing equipment overall the world in recent years. It takes UAV equipped with camera systems, GPS receivers, IMU, laser scanners,automatic flight control systems and other equipments as a platform to obtain ground information in flexible,fast and efficient, precise and accurate, safe, reliable, low operating cost, wide application characteristics, and has been used in the digital city rapid updates , the new rural surveying and mapping support services, emergency disaster relief, etc. It could be taken as an important supplementary means of satellite remote sensing and traditional aerial photography methods. This paper described an unmanned helicopter based mapping system developed by the authors in Japan. The system is equipped with differential GPS and IMU for direct geographic location and orientation with fewer or without ground control points. The onboard laser scanner could be used to collect ground surface model directly georeferenced through the post processed GPS/IMU data and triangulation with the images captured with onboard cameras. The geometric accuracy of the system was verified with actual flight data, and the results showed that the system could be used to map large-scale topographic maps and other areas of application.%本文主要介绍作者在日本研制的一种基于无人直升机平台的多种传感器航测遥感系统,它直接采用GPS和IMU数据进行地理定位定向而不需要地面控制点.通过实飞数据对系统达到的几何精度进行了验证,结果表明该系统可用来测绘大比例尺地形图以及应用于其他相关领域.

  18. Discrete control systems

    CERN Document Server

    Okuyama, Yoshifumi

    2014-01-01

    Discrete Control Systems establishes a basis for the analysis and design of discretized/quantized control systemsfor continuous physical systems. Beginning with the necessary mathematical foundations and system-model descriptions, the text moves on to derive a robust stability condition. To keep a practical perspective on the uncertain physical systems considered, most of the methods treated are carried out in the frequency domain. As part of the design procedure, modified Nyquist–Hall and Nichols diagrams are presented and discretized proportional–integral–derivative control schemes are reconsidered. Schemes for model-reference feedback and discrete-type observers are proposed. Although single-loop feedback systems form the core of the text, some consideration is given to multiple loops and nonlinearities. The robust control performance and stability of interval systems (with multiple uncertainties) are outlined. Finally, the monograph describes the relationship between feedback-control and discrete ev...

  19. 76 FR 2607 - Airworthiness Directives; MD Helicopters, Inc. (MDHI) Model MD900 Helicopters

    Science.gov (United States)

    2011-01-14

    ... System (VSCS) switches and turning off the autopilot (AP/SAS) switch; pulling certain AP/SAS circuit... flight to VFR, prohibiting use of the autopilot, and making changes to the RFM. For all helicopters, the...) Turn ON both VSCS switches. (b) If installed, de-energize the autopilot (AP/SAS) as follows:...

  20. Control system design guide

    Energy Technology Data Exchange (ETDEWEB)

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  1. Controllability of Discontinuous Systems

    OpenAIRE

    Veliov, V. M.; Krastanov, M.

    1988-01-01

    This report presents an approach to the local controllability problem for a discontinuous system. The approach is based on a concept of tangent vector field to a generalized dynamic system, which makes possible the differential geometry tools to be applied in the discontinuous case. Sufficient controllability conditions are derived.

  2. Spacecraft momentum control systems

    CERN Document Server

    Leve, Frederick A; Peck, Mason A

    2015-01-01

    The goal of this book is to serve both as a practical technical reference and a resource for gaining a fuller understanding of the state of the art of spacecraft momentum control systems, specifically looking at control moment gyroscopes (CMGs). As a result, the subject matter includes theory, technology, and systems engineering. The authors combine material on system-level architecture of spacecraft that feature momentum-control systems with material about the momentum-control hardware and software. This also encompasses material on the theoretical and algorithmic approaches to the control of space vehicles with CMGs. In essence, CMGs are the attitude-control actuators that make contemporary highly agile spacecraft possible. The rise of commercial Earth imaging, the advances in privately built spacecraft (including small satellites), and the growing popularity of the subject matter in academic circles over the past decade argues that now is the time for an in-depth treatment of the topic. CMGs are augmented ...

  3. Detection And Avoidance Of Obstacles By Helicopters

    Science.gov (United States)

    Cheng, Victor H. L.; Sridhar, Banavar

    1992-01-01

    Report discusses problems relevant to control subsystems enabling helicopters on nap-of-the-Earth flight paths to detect and avoid obstacles automatically. Indicates similarities between this and obstacle-avoidance problem of industrial mobile robots. Two approaches extend two-dimensional obstacle-avoidance concept to three dimensions. First involves direct search of three-dimensional range-map data for indications of openings between obstacles. Second involves compression of data into two-dimensional map for path search.

  4. Stabilization of Externally Slung Helicopter Loads

    Science.gov (United States)

    1974-08-01

    maximum slir^ Loao weighting and " vertical bounce ." The last question provides information on multi-point suspension of external 1oads. PHASE...an allowable cargo load, and vertical bounce . 110 Maximum Sling Load Weight The maximum sling load lifted by a CH-47B helicopter under...changes were made in their flying technique except for very smooth flight control inputs when lifting an ACL. Vertical Bounce Fifteen of the forty Army

  5. Drone Control System

    Science.gov (United States)

    1983-01-01

    Drones, subscale vehicles like the Firebees, and full scale retired military aircraft are used to test air defense missile systems. The DFCS (Drone Formation Control System) computer, developed by IBM (International Business Machines) Federal Systems Division, can track ten drones at once. A program called ORACLS is used to generate software to track and control Drones. It was originally developed by Langley and supplied by COSMIC (Computer Software Management and Information Center). The program saved the company both time and money.

  6. HYBRID VEHICLE CONTROL SYSTEM

    Directory of Open Access Journals (Sweden)

    V. Dvadnenko

    2016-06-01

    Full Text Available The hybrid vehicle control system includes a start–stop system for an internal combustion engine. The system works in a hybrid mode and normal vehicle operation. To simplify the start–stop system, there were user new possibilities of a hybrid car, which appeared after the conversion. Results of the circuit design of the proposed system of basic blocks are analyzed.

  7. Common Control System Vulnerability

    Energy Technology Data Exchange (ETDEWEB)

    Trent Nelson

    2005-12-01

    The Control Systems Security Program and other programs within the Idaho National Laboratory have discovered a vulnerability common to control systems in all sectors that allows an attacker to penetrate most control systems, spoof the operator, and gain full control of targeted system elements. This vulnerability has been identified on several systems that have been evaluated at INL, and in each case a 100% success rate of completing the attack paths that lead to full system compromise was observed. Since these systems are employed in multiple critical infrastructure sectors, this vulnerability is deemed common to control systems in all sectors. Modern control systems architectures can be considered analogous to today's information networks, and as such are usually approached by attackers using a common attack methodology to penetrate deeper and deeper into the network. This approach often is composed of several phases, including gaining access to the control network, reconnaissance, profiling of vulnerabilities, launching attacks, escalating privilege, maintaining access, and obscuring or removing information that indicates that an intruder was on the system. With irrefutable proof that an external attack can lead to a compromise of a computing resource on the organization's business local area network (LAN), access to the control network is usually considered the first phase in the attack plan. Once the attacker gains access to the control network through direct connections and/or the business LAN, the second phase of reconnaissance begins with traffic analysis within the control domain. Thus, the communications between the workstations and the field device controllers can be monitored and evaluated, allowing an attacker to capture, analyze, and evaluate the commands sent among the control equipment. Through manipulation of the communication protocols of control systems (a process generally referred to as ''reverse engineering''), an

  8. Finite-time synchronization for second-order nonlinear multi-agent system via pinning exponent sliding mode control.

    Science.gov (United States)

    Hou, Huazhou; Zhang, Qingling

    2016-11-01

    In this paper we investigate the finite-time synchronization for second-order multi-agent system via pinning exponent sliding mode control. Firstly, for the nonlinear multi-agent system, differential mean value theorem is employed to transfer the nonlinear system into linear system, then, by pinning only one node in the system with novel exponent sliding mode control, we can achieve synchronization in finite time. Secondly, considering the 3-DOF helicopter system with nonlinear dynamics and disturbances, the novel exponent sliding mode control protocol is applied to only one node to achieve the synchronization. Finally, the simulation results show the effectiveness and the advantages of the proposed method.

  9. [Functional dynamics of the pilots of heavy transport helicopters in the course of a flight shift].

    Science.gov (United States)

    Kamenskiĭ, Iu N

    1982-01-01

    Before and after flights about 300 crewmembers of heavy transport helicopters were examined, using psychophysiological and integral methods that yield professionally important information. During a flight shift the health state of helicopter pilots varies via three stages: habituation, initial decline and distinct lassitude, with the latter developing after 5 h flight load. In order to increase human reliability in the pilot-helicopter system, it is advisable to allow 4 h flight time during a flight shift onboard helicopters of the above type. In this case the pilot exposure to vibration effects will also be limited. The paper describes a maximally permissible spectrum of vibration velocity for a 4 h exposure.

  10. Digital flight control systems

    Science.gov (United States)

    Caglayan, A. K.; Vanlandingham, H. F.

    1977-01-01

    The design of stable feedback control laws for sampled-data systems with variable rate sampling was investigated. These types of sampled-data systems arise naturally in digital flight control systems which use digital actuators where it is desirable to decrease the number of control computer output commands in order to save wear and tear of the associated equipment. The design of aircraft control systems which are optimally tolerant of sensor and actuator failures was also studied. Detection of the failed sensor or actuator must be resolved and if the estimate of the state is used in the control law, then it is also desirable to have an estimator which will give the optimal state estimate even under the failed conditions.

  11. Control Oriented System Identification

    Science.gov (United States)

    1993-08-01

    The research goals for this grant were to obtain algorithms for control oriented system identification is to construct dynamical models of systems...and measured information. Algorithms for this type of nonlinear system identification have been given that produce models suitable for gain scheduled

  12. IGISOL control system modernization

    Energy Technology Data Exchange (ETDEWEB)

    Koponen, J., E-mail: jukka.ae.koponen@jyu.fi; Hakala, J.

    2016-06-01

    Since 2010, the IGISOL research facility at the Accelerator laboratory of the University of Jyväskylä has gone through major changes. Comparing the new IGISOL4 facility to the former IGISOL3 setup, the size of the facility has more than doubled, the length of the ion transport line has grown to about 50 m with several measurement setups and extension capabilities, and the accelerated ions can be fed to the facility from two different cyclotrons. The facility has evolved to a system comprising hundreds of manual, pneumatic and electronic devices. These changes have prompted the need to modernize also the facility control system taking care of monitoring and transporting the ion beams. In addition, the control system is also used for some scientific data acquisition tasks. Basic guidelines for the IGISOL control system update have been remote control, safety, usability, reliability and maintainability. Legacy components have had a major significance in the control system hardware and for the renewed control system software the Experimental Physics and Industrial Control System (EPICS) has been chosen as the architectural backbone.

  13. Load Control System Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Trudnowski, Daniel [Montana Tech of the Univ. of Montana, Butte, MT (United States)

    2015-04-03

    This report summarizes the results of the Load Control System Reliability project (DOE Award DE-FC26-06NT42750). The original grant was awarded to Montana Tech April 2006. Follow-on DOE awards and expansions to the project scope occurred August 2007, January 2009, April 2011, and April 2013. In addition to the DOE monies, the project also consisted of matching funds from the states of Montana and Wyoming. Project participants included Montana Tech; the University of Wyoming; Montana State University; NorthWestern Energy, Inc., and MSE. Research focused on two areas: real-time power-system load control methodologies; and, power-system measurement-based stability-assessment operation and control tools. The majority of effort was focused on area 2. Results from the research includes: development of fundamental power-system dynamic concepts, control schemes, and signal-processing algorithms; many papers (including two prize papers) in leading journals and conferences and leadership of IEEE activities; one patent; participation in major actual-system testing in the western North American power system; prototype power-system operation and control software installed and tested at three major North American control centers; and, the incubation of a new commercial-grade operation and control software tool. Work under this grant certainly supported the DOE-OE goals in the area of “Real Time Grid Reliability Management.”

  14. ISTTOK control system upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Ivo S., E-mail: ivoc@ipfn.ist.utl.pt; Duarte, Paulo; Fernandes, Horácio; Valcárcel, Daniel F.; Carvalho, Pedro J.; Silva, Carlos; Duarte, André S.; Neto, André; Sousa, Jorge; Batista, António J.N.; Carvalho, Bernardo B.

    2013-10-15

    Highlights: •ISTTOK fast controller. •All real-time diagnostic and actuators were integrated in the control platform. •100 μs control cycle under the MARTe framework. •The ISTTOK control system upgrade provides reliable operation with an improved operational space. -- Abstract: The ISTTOK tokamak (Ip = 4 kA, BT = 0.5 T, R = 0.46 m, a = 0.085 m) is one of the few tokamaks with regular alternate plasma current (AC) discharges scientific programme. In order to improve the discharge stability and to increase the number of AC discharge cycles a novel control system was developed. The controller acquires data from 50 analog-to-digital converter (ADC) channels of real-time diagnostics and measurements: tomography, Mirnov coils, interferometer, electric probes, sine and cosine probes, bolometer, current delivered by the power supplies, loop voltage and plasma current. The system has a control cycle of 100 μs during which it reads all the diagnostics connected to the advanced telecommunications computing architecture (ATCA) digitizers and sends the control reference to ISTTOK actuators. The controller algorithms are executed on an Intel{sup ®} Q8200 chip with 4 cores running at 2.33 GHz and connected to the I/O interfaces through an ATCA based environment. The real-time control system was programmed in C++ on top of the Multi-threaded Application Real-Time executor (MARTe). To extend the duration of the AC discharges and the plasma stability a new magnetising field power supply was commissioned and the horizontal and vertical field power supplies were also upgraded. The new system also features a user-friendly interface based on HyperText Markup Language (HTML) and Javascript to configure the controller parameters. This paper presents the ISTTOK control system and the consequent update of real-time diagnostics and actuators.

  15. World helicopter market study

    Science.gov (United States)

    Cleary, B.; Pearson, R. W.; Greenwood, S. W.; Kaplan, L.

    1978-01-01

    The extent of the threat to the US helicopter industry posed by a determined effort by foreign manufacturers, European companies in particular, to supply their own domestic markets and also to penetrate export markets, including the USA is assessed. Available data on US and world markets for civil and military uses are collated and presented in both graphic and tabular form showing the past history of production and markets and, where forecasts are available, anticipated future trends. The data are discussed on an item-by-item basis and inferences are drawn in as much depth as appears justified.

  16. Control systems under attack?

    CERN Document Server

    Lüders, Stefan

    2005-01-01

    The enormous growth of the Internet during the last decade offers new means to share and distribute both information and data. In Industry, this results in a rapprochement of the production facilities, i.e. their Process Control and Automation Systems, and the data warehouses. At CERN, the Internet opens the possibility to monitor and even control (parts of) the LHC and its four experiments remotely from anywhere in the world. However, the adoption of standard IT technologies to Distributed Process Control and Automation Systems exposes inherent vulnerabilities to the world. The Teststand On Control System Security at CERN (TOCSSiC) is dedicated to explore the vulnerabilities of arbitrary Commercial-Of-The-Shelf hardware devices connected to standard Ethernet. As such, TOCSSiC should discover their vulnerabilities, point out areas of lack of security, and address areas of improvement which can then be confidentially communicated to manufacturers. This paper points out risks of accessing the Control and Automa...

  17. Control and Information Systems

    Directory of Open Access Journals (Sweden)

    Jiri Zahradnik

    2003-01-01

    Full Text Available The article deals with main tends of scientific research activities of Department of Control and Information Systems at the Faculty of Electrical Engineering of University of Zilina and its perspectives in this area.

  18. Tautological control systems

    CERN Document Server

    Lewis, Andrew D

    2014-01-01

    This brief presents a description of a new modelling framework for nonlinear/geometric control theory. The framework is intended to be—and shown to be—feedback-invariant. As such, Tautological Control Systems provides a platform for understanding fundamental structural problems in geometric control theory. Part of the novelty of the text stems from the variety of regularity classes, e.g., Lipschitz, finitely differentiable, smooth, real analytic, with which it deals in a comprehensive and unified manner. The treatment of the important real analytic class especially reflects recent work on real analytic topologies by the author. Applied mathematicians interested in nonlinear and geometric control theory will find this brief of interest as a starting point for work in which feedback invariance is important. Graduate students working in control theory may also find Tautological Control Systems to be a stimulating starting point for their research.

  19. Reset Control Systems

    CERN Document Server

    Baños, Alfonso

    2012-01-01

    Reset Control Systems addresses the analysis for reset control treating both its basic form which requires only that the state of the controller be reinitialized to zero (the reset action) each time the tracking error crosses zero (the reset condition), and some useful variations of the reset action (partial reset with fixed or variable reset percentage) and of the reset condition (fixed or variable reset band and anticipative reset). The issues regarding reset control – concepts and motivation; analysis tools; and the application of design methodologies to real-world examples – are given comprehensive coverage. The text opens with an historical perspective which moves from the seminal work of the Clegg integrator and Horowitz FORE to more recent approaches based on impulsive/hybrid control systems and explains the motivation for reset compensation. Preliminary material dealing with notation, basic definitions and results, and with the definition of the control problem under study is also included. The fo...

  20. Internal control system

    OpenAIRE

    Pavésková, Ivana

    2012-01-01

    Dissertation focuse on the internal control system in the enterprises, aims to map the control system by focusing on the purchasing department. I focused on the purchasing process, because with an increasing trends of outsourcing services and the increasing interconnectedness of enterprises increases the risk of fraud currently in the purchasing process. To the research was selected the sample of companies from the banking and non-banking environment, to which were sent a questionnaire focusi...

  1. Nonlinear Control Systems

    Science.gov (United States)

    2007-03-01

    IEEE Transactions on Automatic Control , AC- 48, pp. 1712-1723, (2003). [14] C.I. Byrnes, A. Isidori...Nonlinear internal models for output regulation,” IEEE Transactions on Automatic Control , AC-49, pp. 2244-2247, (2004). [15] C.I. Byrnes, F. Celani, A...approach,” IEEE Transactions on Automatic Control , 48 (Dec. 2003), 2172–2190. 2. C. I. Byrnes, “Differential Forms and Dynamical Systems,” to appear

  2. An analytically linearized helicopter model with improved modeling accuracy

    Science.gov (United States)

    Jensen, Patrick T.; Curtiss, H. C., Jr.; Mckillip, Robert M., Jr.

    1991-01-01

    An analytically linearized model for helicopter flight response including rotor blade dynamics and dynamic inflow, that was recently developed, was studied with the objective of increasing the understanding, the ease of use, and the accuracy of the model. The mathematical model is described along with a description of the UH-60A Black Hawk helicopter and flight test used to validate the model. To aid in utilization of the model for sensitivity analysis, a new, faster, and more efficient implementation of the model was developed. It is shown that several errors in the mathematical modeling of the system caused a reduction in accuracy. These errors in rotor force resolution, trim force and moment calculation, and rotor inertia terms were corrected along with improvements to the programming style and documentation. Use of a trim input file to drive the model is examined. Trim file errors in blade twist, control input phase angle, coning and lag angles, main and tail rotor pitch, and uniform induced velocity, were corrected. Finally, through direct comparison of the original and corrected model responses to flight test data, the effect of the corrections on overall model output is shown.

  3. FABRIC QUALITY CONTROL SYSTEMS

    Directory of Open Access Journals (Sweden)

    Özlem KISAOĞLU

    2006-02-01

    Full Text Available Woven fabric quality depends on yarn properties at first, then weaving preparation and weaving processes. Defect control of grey and finished fabric is done manually on the lighted tables or automatically. Fabrics can be controlled by the help of the image analysis method. In image system the image of fabrics can be digitized by video camera and after storing controlled by the various processing. Recently neural networks, fuzzy logic, best wavelet packet model on automatic fabric inspection are developed. In this study the advantages and disadvantages of manual and automatic, on-line fabric inspection systems are given comparatively.

  4. ACCESS Pointing Control System

    Science.gov (United States)

    Brugarolas, Paul; Alexander, James; Trauger, John; Moody, Dwight; Egerman, Robert; Vallone, Phillip; Elias, Jason; Hejal, Reem; Camelo, Vanessa; Bronowicki, Allen; O'Connor, David; Partrick, Richard; Orzechowski, Pawel; Spitter, Connie; Lillie, Chuck

    2010-01-01

    ACCESS (Actively-Corrected Coronograph for Exoplanet System Studies) was one of four medium-class exoplanet concepts selected for the NASA Astrophysics Strategic Mission Concept Study (ASMCS) program in 2008/2009. The ACCESS study evaluated four major coronograph concepts under a common space observatory. This paper describes the high precision pointing control system (PCS) baselined for this observatory.

  5. Computer controlled antenna system

    Science.gov (United States)

    Raumann, N. A.

    1972-01-01

    The application of small computers using digital techniques for operating the servo and control system of large antennas is discussed. The advantages of the system are described. The techniques were evaluated with a forty foot antenna and the Sigma V computer. Programs have been completed which drive the antenna directly without the need for a servo amplifier, antenna position programmer or a scan generator.

  6. Fault Tolerant Control Systems

    DEFF Research Database (Denmark)

    Bøgh, S. A.

    was to avoid a total close-down in case of the most likely faults. The second was a fault tolerant attitude control system for a micro satellite where the operation of the system is mission critical. The purpose was to avoid hazardous effects from faults and maintain operation if possible. A method...

  7. CNEOST Control Software System

    Science.gov (United States)

    Wang, X.; Zhao, H. B.; Xia, Y.; Lu, H.; Li, B.

    2015-03-01

    In 2013, CNEOST (China Near Earth Object Survey Telescope) adapted its hardware system for the new CCD camera. Based on the new system architecture, the control software is re-designed and implemented. The software system adopts the message passing mechanism via WebSocket protocol, and improves its flexibility, expansibility, and scalability. The user interface with responsive web design realizes the remote operating under both desktop and mobile devices. The stable operating of software system has greatly enhanced the operation efficiency while reducing the complexity, and has also made a successful attempt for the future system design of telescope and telescope cloud.

  8. The ISOLDE control system

    Science.gov (United States)

    Deloose, I.; Pace, A.

    1994-12-01

    The two CERN isotope separators named ISOLDE have been running on the new Personal Computer (PC) based control system since April 1992. The new architecture that makes heavy use of the commercial software and hardware of the PC market has been implemented on the 1700 geographically distributed control channels of the two separators and their experimental area. Eleven MSDOS Intel-based PCs with approximately 80 acquisition and control boards are used to access the equipment and are controlled from three PCs running Microsoft Windows used as consoles through a Novell Local Area Network. This paper describes the interesting solutions found and discusses the reduced programming workload and costs that have been obtained.

  9. Controllability of delay systems with restrained controls

    Science.gov (United States)

    Chukwu, E. N.

    1979-01-01

    Using a geometric growth condition, both the function space and Euclidean controllability of a nonlinear delay system which has a compact and convex control set are characterized. This extends analogous results for ordinary differential systems, and it yields conditions under which perturbed nonlinear delay controllable systems are controllable.

  10. The design, construction and operation of the helicopter underwater escape trainer

    Energy Technology Data Exchange (ETDEWEB)

    Urguhart, A.E.

    1983-09-01

    Civil helicopters hopefully are not likely to be subjected to the possibility of being shot from the skies and descending in an uncontrolled manner. Should a civil helicopter have to ditch, due to some mechanical or electrical failure, it is reasonable to predict that it may do so in a controlled manner, with the pilot either taking the positive decision to ditch the helicopter, or being forced to do so. It is for such controlled or nearly controlled ditchings that training of personnel should be considered. The air-crews involved in flying civil helicopters are not dissimilar to military service personnel, in that they are a disciplined group of professionals qualified and experienced in their business of flying and ditching. However, the offshore worker, being ferried to his place of work, is, in essence, the human cargo forced by necessity to be transported by helicopter. Many offshore employees may not wish to be, or particularly enjoy, being transported over the North Sea by helicopter nevertheless, it is the only viable mode of transport and, with the number of helicopter flights which are currently being undertaken to and from the North Sea installations, it is not being over-pessimistic to foresee the likelihood of a civil helicopter with passengers having to ditch in the sea.

  11. Integrated cockpit design for the Army helicopter improvement program

    Science.gov (United States)

    Drennen, T.; Bowen, B.

    1984-01-01

    The main Army Helicopter Improvement Program (AHIP) mission is to navigate precisely, locate targets accurately, communicate their position to other battlefield elements, and to designate them for laser guided weapons. The onboard navigation and mast-mounted sight (MMS) avionics enable accurate tracking of current aircraft position and subsequent target location. The AHIP crewstation development was based on extensive mission/task analysis, function allocation, total system design, and test and verification. The avionics requirements to meet the mission was limited by the existing aircraft structural and performance characteristics and resultant space, weight, and power restrictions. These limitations and night operations requirement led to the use of night vision goggles. The combination of these requirements and limitations dictated an integrated control/display approach using multifunction displays and controls.

  12. 14 CFR Appendix F to Part 91 - Helicopter Flight Recorder Specifications

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Helicopter Flight Recorder Specifications F Appendix F to Part 91 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Appendix F to Part 91—Helicopter Flight Recorder Specifications Parameters Range Installed system 1...

  13. 电控旋翼直升机飞行动力学建模与配平特性研究%Flight dynamics modeling and trim characteristics of helicopters with electrically controlled rotor

    Institute of Scientific and Technical Information of China (English)

    陆洋; 王超; 赵鑫

    2013-01-01

    首先基于Peters He广义动态尾迹理论,建立了电控旋翼动态尾迹入流模型,进一步结合电控旋翼襟翼操纵与桨叶变距之间的关系、桨叶挥舞运动方程和带襟翼翼型非定常气动力模型建立了适用于飞行力学分析的电控旋翼气动力模型.在此基础上,结合机身、尾桨、尾面的气动力模型,建立了完整的电控旋翼直升机飞行动力学分析模型.以Z-11直升机为基准改造为电控旋翼直升机作为算例,计算了前飞状态下电控旋翼直升机的诱导速度分布和桨盘迎角分布,对比了电控旋翼与常规旋翼的气动特性差异;在此基础上,进一步分析了电控旋翼直升机的配平特性随前飞速度的变化规律以及与常规直升机的差异.%Firstly,a dynamic inflow model for electrically controlled rotor (ECR) is developed based on the "Peters-He" generalized dynamic wake theory,and an accurate aerodynamics model of ECR,which is suited for the analysis of ECR helicopter flight dynamics,is built combined with the relationship between flap deflection and blade pitch,the blade flapping equation and the unsteady aerodynamic model of airfoil with trailing-edge flap.Then,on this basis,an ECR helicopter flight dynamics model is established combined with the aerodynamics models of airframe,tail rotor,horizontal and vertical tail.Taking Z-11 helicopter as a numerical example,the distributions of ECR induced velocity and angles of attack variations with advance speed are calculated and compared with the baseline rotor.Furthermore,the trim characteristics of the ECR helicopter is investigated.

  14. Simple adaptive control system design for a quadrotor with an internal PFC

    Energy Technology Data Exchange (ETDEWEB)

    Mizumoto, Ikuro; Nakamura, Takuto; Kumon, Makoto; Takagi, Taro [Dept. of Mechanical Systems Engineering, Kumamoto University 2-39-1 Kurokami, Kumamoto, 860-8555 (Japan)

    2014-12-10

    The paper deals with an adaptive control system design problem for a four rotor helicopter or quadrotor. A simple adaptive control design scheme with a parallel feedforward compensator (PFC) in the internal loop of the considered quadrotor will be proposed based on the backstepping strategy. As is well known, the backstepping control strategy is one of the advanced control strategy for nonlinear systems. However, the control algorithm will become complex if the system has higher order relative degrees. We will show that one can skip some design steps of the backstepping method by introducing a PFC in the inner loop of the considered quadrotor, so that the structure of the obtained controller will be simplified and a high gain based adaptive feedback control system will be designed. The effectiveness of the proposed method will be confirmed through numerical simulations.

  15. A new smooth robust control design for uncertain nonlinear systems with non-vanishing disturbances

    Science.gov (United States)

    Xian, Bin; Zhang, Yao

    2016-06-01

    In this paper, we consider the control problem for a general class of nonlinear system subjected to uncertain dynamics and non-varnishing disturbances. A smooth nonlinear control algorithm is presented to tackle these uncertainties and disturbances. The proposed control design employs the integral of a nonlinear sigmoid function to compensate the uncertain dynamics, and achieve a uniformly semi-global practical asymptotic stable tracking control of the system outputs. A novel Lyapunov-based stability analysis is employed to prove the convergence of the tracking errors and the stability of the closed-loop system. Numerical simulation results on a two-link robot manipulator are presented to illustrate the performance of the proposed control algorithm comparing with the layer-boundary sliding mode controller and the robust of integration of sign of error control design. Furthermore, real-time experiment results for the attitude control of a quadrotor helicopter are also included to confirm the effectiveness of the proposed algorithm.

  16. Vertebral pain in helicopter pilots

    Science.gov (United States)

    Auffret, R.; Delahaye, R. P.; Metges, P. J.; VICENS

    1980-01-01

    Pathological forms of spinal pain engendered by piloting helicopters were clinically studied. Lumbalgia and pathology of the dorsal and cervical spine are discussed along with their clinical and radiological signs and origins.

  17. Controllability of nonlinear systems.

    Science.gov (United States)

    Sussmann, H. J.; Jurdjevic, V.

    1972-01-01

    Discussion of the controllability of nonlinear systems described by the equation dx/dt - F(x,u). Concepts formulated by Chow (1939) and Lobry (1970) are applied to establish criteria for F and its derivatives to obtain qualitative information on sets which can be obtained from x which denotes a variable of state in an arbitrary, real, analytical manifold. It is shown that controllability implies strong accessibility for a large class of manifolds including Euclidean spaces.-

  18. Optical controlled keyboard system

    Science.gov (United States)

    Budzyński, Łukasz; Długosz, Dariusz; Niewiarowski, Bartosz; Zajkowski, Maciej

    2011-06-01

    Control systems of our computers are common devices, based on the manipulation of keys or a moving ball. Completely healthy people have no problems with the operation of such devices. Human disability makes everyday activities become a challenge and create trouble. When a man can not move his hands, the work becomes difficult or often impossible. Controlled optical keyboard is a modern device that allows to bypass the limitations of disability limbs. The use of wireless optical transmission allows to control computer using a laser beam, which cooperates with the photodetectors. The article presents the construction and operation of non-contact optical keyboard for people with disabilities.

  19. Modern tandem control systems

    Science.gov (United States)

    Lutz, J. R.; Marsaudon, J. C.

    1993-04-01

    Nowadays, tandem electrostatic accelerators can benefit greatly from the growing possibilities provided by modern control facilities. Controlling an electrostatic accelerator first requires the solution of technological problems raised by the necessity of fitting inside the tank equipment which is highly stressed by the physical environment. Then, these controls can take advantage of new techniques which appear on the market. Present computer technology provides cheap powerful workstations for efficient operator interfacing, and new modular and distributed control concepts have been developed for general use in experimental physics, in data acquisition and in control systems. The general trend towards standardization is now accepted for both hardware and software and this brings benefits to the designer and the user.

  20. Sea King Mk. 50 Helicopter Sonar Dynamics Study. A Simplified Control Systems Mathematical Model

    Science.gov (United States)

    1979-02-01

    Channel (Fig. 7) If SAUTO P=I AUTO P =(CP2 THE STK) -(CP3 *THE HE) f-(2.0) (CP4*IrpsTHE*HE)+ (ASW P) -+ (THE TRM) If S AUTO P = 0(2) AUTO P = 03.(2 If...IAUTO P < ELAP(23 AUTO PL =AUTO P (3 If AUTO PI ; EL AP1 24 AUTO PL = JEL AP; * SIGN AUTO P(24 2.2 Roll Channel (Fig. 8) If SAUTO R= Ir ~TR2s ST) AUOR...ARE(8 AUTO RL = !EL ARE s SIGN AUTO R (28 2.3 Vaw Stabilizer and Heading Hold (Fig. 9) If SAUTO Y -- I1(29 AUTO Y -- (CY3 * R HEH) i(PSI Pt)(29 If

  1. The evolution of helicopters

    Science.gov (United States)

    Chen, R.; Wen, C. Y.; Lorente, S.; Bejan, A.

    2016-07-01

    Here, we show that during their half-century history, helicopters have been evolving into geometrically similar architectures with surprisingly sharp correlations between dimensions, performance, and body size. For example, proportionalities emerge between body size, engine size, and the fuel load. Furthermore, the engine efficiency increases with the engine size, and the propeller radius is roughly the same as the length scale of the whole body. These trends are in accord with the constructal law, which accounts for the engine efficiency trend and the proportionality between "motor" size and body size in animals and vehicles. These body-size effects are qualitatively the same as those uncovered earlier for the evolution of aircraft. The present study adds to this theoretical body of research the evolutionary design of all technologies [A. Bejan, The Physics of Life: The Evolution of Everything (St. Martin's Press, New York, 2016)].

  2. Control of complex systems

    CERN Document Server

    Albertos, Pedro; Blanke, Mogens; Isidori, Alberto; Schaufelberger, Walter; Sanz, Ricardo

    2001-01-01

    The world of artificial systems is reaching complexity levels that es­ cape human understanding. Surface traffic, electricity distribution, air­ planes, mobile communications, etc. , are examples that demonstrate that we are running into problems that are beyond classical scientific or engi­ neering knowledge. There is an ongoing world-wide effort to understand these systems and develop models that can capture its behavior. The reason for this work is clear, if our lack of understanding deepens, we will lose our capability to control these systems and make they behave as we want. Researchers from many different fields are trying to understand and develop theories for complex man-made systems. This book presents re­ search from the perspective of control and systems theory. The book has grown out of activities in the research program Control of Complex Systems (COSY). The program has been sponsored by the Eu­ ropean Science Foundation (ESF) which for 25 years has been one of the leading players in stimula...

  3. Development of Filter-Blower Unit for use in the Advanced Nuclear Biological Chemical Protection System (ANBCPS) Helicopter/Transport-aircraft version

    NARCIS (Netherlands)

    Sabel, R.; Reffeltrath, P.A.; Jonkman, A.; Post, T.

    2006-01-01

    As a participant in the three-nation partnership for development of the ANBCP-S for use in Helicopters, Transport Aircraft and Fast Jet, the Royal Netherlands Airforce (RNLAF) picked up the challenge to design a Filter- Blower-Unit (FBU). Major Command (MajCom) of the RNLAF set priority to develop a

  4. Development of Filter-Blower Unit for use in the Advanced Nuclear Biological Chemical Protection System (ANBCPS) Helicopter/Transport-aircraft version

    NARCIS (Netherlands)

    Sabel, R.; Reffeltrath, P.A.; Jonkman, A.; Post, T.

    2006-01-01

    As a participant in the three-nation partnership for development of the ANBCP-S for use in Helicopters, Transport Aircraft and Fast Jet, the Royal Netherlands Airforce (RNLAF) picked up the challenge to design a Filter- Blower-Unit (FBU). Major Command (MajCom) of the RNLAF set priority to develop a

  5. Study to Determine the CB (Chemical/Biological) Threat and Define Alternative Crew Protection Systems for the Advanced Attack Helicopter (AAH). Volume 1

    Science.gov (United States)

    1980-12-01

    34Advlanced Attack Helicopter (AAH). This document should be of significant benefit to the AAH Project Management (AAM PM) for future planning and/or...position. The inner permeable five finger gloves are ambidextrous . Materials Used: The impermeable outer gloves are unsupported butyl rubber 0.6 -n (0.025

  6. Supervisory Control of Networked Control Systems

    Science.gov (United States)

    2006-01-15

    REPORT: January 15, 2006 Problem Statement: A networked control system is a control system whose feedback path is realized over a computer...theoretical bounds derived in [Ling03a]. 6. The feedback information in a networked control system is quantized due to the digital nature of

  7. Controllability of Complex Systems

    Science.gov (United States)

    Slotine, Jean-Jacques

    2013-03-01

    We review recent work on controllability of complex systems. We also discuss the interplay of our results with questions of synchronization, and point out key directions of future research. Work done in collaboration with Yang-Yu Liu, Center for Complex Network Research and Departments of Physics, Computer Science and Biology, Northeastern University and Center for Cancer Systems Biology, Dana-Farber Cancer Institute; and Albert-László Barabási, Center for Complex Network Research and Departments of Physics, Computer Science and Biology, Northeastern University; Center for Cancer Systems Biology, Dana-Farber Cancer Institute; and Department of Medicine, Brigham and Women's Hospital, Harvard Medical School.

  8. Internet Congestion Control System

    Directory of Open Access Journals (Sweden)

    Pranoto Rusmin

    2010-10-01

    Full Text Available Internet congestion occurs when resource demands exceeds the network capacity. But, it is not the only reason. Congestion can happen on some users because some others user has higher sending rate. Then some users with lower sending rate will experience congestion. This partial congestion is caused by inexactly feedback. At this moment congestion are solved by the involvement of two controlling mechanisms. These mechanisms are flow/congestion control in the TCP source and Active Queue Management (AQM in the router. AQM will provide feedback to the source a kind of indication for the occurrence of the congestion in the router, whereas the source will adapt the sending rate appropriate with the feedback. These mechanisms are not enough to solve internet congestion problem completely. Therefore, this paper will explain internet congestion causes, weakness, and congestion control technique that researchers have been developed. To describe congestion system mechanisms and responses, the system will be simulated by Matlab.

  9. Electric turbocompound control system

    Energy Technology Data Exchange (ETDEWEB)

    Algrain, Marcelo C. (Dunlap, IL)

    2007-02-13

    Turbocompound systems can be used to affect engine operation using the energy in exhaust gas that is driving the available turbocharger. A first electrical device acts as a generator in response to turbocharger rotation. A second electrical device acts as a motor to put mechanical power into the engine, typically at the crankshaft. Apparatus, systems, steps, and methods are described to control the generator and motor operations to control the amount of power being recovered. This can control engine operation closer to desirable parameters for given engine-related operating conditions compared to actual. The electrical devices can also operate in "reverse," going between motor and generator functions. This permits the electrical device associated with the crankshaft to drive the electrical device associated with the turbocharger as a motor, overcoming deficient engine operating conditions such as associated with turbocharger lag.

  10. 用于电力线巡检的大型无人直升机多传感器系统集成设计%Integrated Design on Multi-sensor System of Large Unmanned Helicopter for Electric Power Inspection

    Institute of Scientific and Technical Information of China (English)

    王柯; 蔡艳辉; 彭向阳; 刘正军; 麦晓明; 张金铎

    2016-01-01

    基于电力线路安全巡检需要,设计了集可见光相机、红外热像仪、紫外成像仪、激光扫描仪和定位定姿系统等设备为一体的无人直升机多传感器系统。提出了基于全球定位系统时间系统的高精度后处理软同步方法,实现各个传感器系统的独立、协调同步工作。同时提出基于服务器–客户端软件架构,实现各个传感器控制和数据采集的相互独立,最大限度提高传感器系统工作的安全性和可靠性。多传感器集成的无人机巡检试验结果显示,该系统能够在单次飞行中同步获取多波段、多种类型的巡检数据,数据之间具有强相关性,可以用于多源数据联合诊断分析,满足电力线路安全隐患多要素自动诊断的需要。%Based on requirements for safe inspection on electric power lines,a kind of multi-sensor system of unmanned heli-copter which includes visible light camera,infrared imager,ultraviolet imager,laser scanner,positioning and orientation system (POS),and so on is designed. Meanwhile,a high-precision and post-process soft synchronization method based on global positioning system (GPS)is proposed for realizing independent,coordinate and synchronous work of each sensor sys-tem. Software structure based on server-customer is designed to realize mutual independence of each sensor control and data acquisition,and furthest improve security and reliability of the sensor system. Experimental results of inspection of the multi-sensor integrated unmanned helicopter indicate that this system could obtain multi-wave and polytype inspection data at the same time in one single flying,and there is strong correlation among data which could be used for united diagnosis and a-nalysis on multi-source data and satisfy requirement for automatic diagnosis on multi-factor in potential safe hazards of elec-tric power lines.

  11. An Advanced Fly-By-Wire Flight Control System for the RASCAL Research Rotorcraft: Concept to Reality

    Science.gov (United States)

    Rediess, Nicholas A.; Dones, Fernando; McManus, Bruce L.; Ulmer, Lon; Aiken, Edwin W. (Technical Monitor)

    1995-01-01

    Design features of a new fly-by-wire flight control system for the Rotorcraft-Aircrew Systems Concepts Airborne Laboratory (RASCAL) are described. Using a UH-60A Black Hawk helicopter as a baseline vehicle, the RASCAL will be a flying laboratory capable of supporting the research requirements of major NASA and Army guidance, control, and display research programs. The paper describes the research facility requirements of these pro-rams and the design implementation of the research flight control system (RFCS), with emphasis on safety-of-flight, adaptability to multiple requirements and performance considerations.

  12. The ISOLDE control system

    Energy Technology Data Exchange (ETDEWEB)

    Deloose, I. (CERN, PS Division, CH-1211 Geneva 23 (Switzerland)); Pace, A. (CERN, PS Division, CH-1211 Geneva 23 (Switzerland))

    1994-12-15

    The two CERN isotope separators named ISOLDE have been running on the new Personal Computer (PC) based control system since April 1992. The new architecture that makes heavy use of the commercial software and hardware of the PC market has been implemented on the 1700 geographically distributed control channels of the two separators and their experimental area. Eleven MSDOS Intel-based PCs with approximately 80 acquisition and control boards are used to access the equipment and are controlled from three PCs running Microsoft Windows used as consoles through a Novell Local Area Network. This paper describes the interesting solutions found and discusses the reduced programming workload and costs that have been obtained. ((orig.))

  13. Cryogenic Control System

    Energy Technology Data Exchange (ETDEWEB)

    Goloborod' ko, S.; /Fermilab

    1989-02-27

    The control system (CS) for the cryogenic arrangement of the DO Liquid Argon Calorimeter consists of a Texas instruments 560/565 Programmable Logical Controller (PLC), two remote bases with Remote Base Controllers and a corresponding set of input/output (I/O) modules, and a PC AST Premium 286 (IBM AT Compatible). The PLC scans a set of inputs and provides a set of outputs based on a ladder logic program and PID control loops. The inputs are logic or analog (current, voltage) signals from equipment status switches or transducers. The outputs are logic or analog (current or voltage) signals for switching solenoids and positioning pneumatic actuators. Programming of the PLC is preformed by using the TISOFT2/560/565 package, which is installed in the PC. The PC communicates to the PLC through a serial RS232 port and provides operator interface to the cryogenic process using Xpresslink software.

  14. Simulation Study on the Feasibility of Gun-Launched Missile Against Attack Helicopters

    Institute of Scientific and Technical Information of China (English)

    王狂飙; 张天桥

    2001-01-01

    The feasibility of providing the tank a limited anti-helicopterability with gun-launched missile is studied. A type of simulation model of gun-launched missile against attack helicopters is established. The simulation and the parameter optimization of missile control system under various circumstances are done. The gun-launched missile can directly hit the helicopters in the typical tracks, all the missdistances are less than 1 m and the maximum overload is less than available overload. Gun-launched missile is a feasible choice for tanks against attack helicopters.%研究通过炮射反坦克导弹赋予坦克有限反武装直升机能力的可行性.建立了一种炮射导弹与武装直升机对抗的仿真模型,并在各种情况下进行了系统仿真与导弹控制系统参数优化.经参数优化的炮射导弹在给定的武装直升机各种航迹下,均可直接命中,脱靶量均小于1m,最大过载不超过可用过载.仿真结果表明炮射导弹是坦克对抗武装直升机的一种可行的选择.

  15. Microprocessor control for standardized power control systems

    Science.gov (United States)

    Green, D. G.; Perry, E.

    1978-01-01

    The use of microcomputers in space-oriented power systems as a replacement for existing inflexible analog type controllers has been proposed. This study examines multiprocessor systems, various modularity concepts and presents a conceptualized power system incorporating a multiprocessor controller as well as preliminary results from a breadboard model of the proposed system.

  16. Magnetorheological fluids and applications to adaptive landing gear for a lightweight helicopter

    Science.gov (United States)

    Ahure-Powell, Louise A.

    . Another objective of this research is to satisfy the requirement of a helicopter landing gear damper to enable adaptive shock mitigation performance over a desired sink rate range. It was intended to maintain a constant stroking force of 17 793 N (4000 lbf) over a sink rate range of 1.8-7.9 m/s (6-26 ft/s), which is a substantial increase of the high-end of the sink rate range from 3.7 m/s (12 ft/s), in prior related work, to 7.9 m/s (26 ft/s). To achieve this increase in the high-end of the sink rate range, a spiral wave spring-assisted passive valve MR landing gear damper was developed. Drop tests were first conducted using a single MR landing gear damper. In order to maintain the peak stroking load constant over the desired sink rate range, a bang-bang current control algorithm was formulated using a force feedback signal. The controlled stroking loads were experimentally evaluated using a single drop damper test setup. To emulate the landing gear system of a lightweight helicopter, an iron bird drop test apparatus with four spiral wave spring-assisted relief valves MR landing gear dampers, was fabricated and successfully tested. The effectiveness of the proposed adaptive MR landing gear damper was theoretically and experimentally verified. The bang-bang current control algorithm successfully regulated the stroking load at 4000 lbf over a sink rate range of 6-22 ft/s in the iron bird tests, which significantly exceeds the sink rate range of the previous study (6-12 ft/s). The effectiveness of the proposed adaptive MR landing gear damper with a spiral wave spring-assisted passive valve is theoretically and experimentally verified.

  17. Wireless Remote Control System

    Directory of Open Access Journals (Sweden)

    Adrian Tigauan

    2012-06-01

    Full Text Available This paper presents the design of a wireless remote control system based on the ZigBee communication protocol. Gathering data from sensors or performing control tasks through wireless communication is advantageous in situations in which the use of cables is impractical. An Atmega328 microcontroller (from slave device is used for gathering data from the sensors and transmitting it to a coordinator device with the help of the XBee modules. The ZigBee standard is suitable for low-cost, low-data-rate and low-power wireless networks implementations. The XBee-PRO module, designed to meet ZigBee standards, requires minimal power for reliable data exchange between devices over a distance of up to 1600m outdoors. A key component of the ZigBee protocol is the ability to support networking and this can be used in a wireless remote control system. This system may be employed e.g. to control temperature and humidity (SHT11 sensor and light intensity (TSL230 sensor levels inside a commercial greenhouse.

  18. Dynamitron control systems

    Science.gov (United States)

    Lisanti, Thomas F.

    2005-12-01

    The Dynamitron control system utilizes the latest personal computer technology in control circuitry and components. Both the DPC-2000 and newer Millennium series of control systems make use of their modular architecture in both software and hardware to keep up with customer and engineering demands. This also allows the main structure of the software to remain constant for the user while software drivers are easily changed as hardware demands are modified and improved. The system is presented as four units; the Remote I/O (Input/Output), Local Analog and Digital I/O, Operator Interface and the Main Computer. The operator is provided with a selection of many informative screen displays. The control program handles all graphic screen displays and the updating of these screens directly; it does not communicate to a display terminal. This adds to the quick response and excellent operator feedback received while operating the accelerator. The CPU also has the ability to store and record all process variable setpoints for each product that will be treated. All process parameters are printed to a report at regular intervals during a process run for record keeping.

  19. Management control system description

    Energy Technology Data Exchange (ETDEWEB)

    Bence, P. J.

    1990-10-01

    This Management Control System (MCS) description describes the processes used to manage the cost and schedule of work performed by Westinghouse Hanford Company (Westinghouse Hanford) for the US Department of Energy, Richland Operations Office (DOE-RL), Richland, Washington. Westinghouse Hanford will maintain and use formal cost and schedule management control systems, as presented in this document, in performing work for the DOE-RL. This MCS description is a controlled document and will be modified or updated as required. This document must be approved by the DOE-RL; thereafter, any significant change will require DOE-RL concurrence. Westinghouse Hanford is the DOE-RL operations and engineering contractor at the Hanford Site. Activities associated with this contract (DE-AC06-87RL10930) include operating existing plant facilities, managing defined projects and programs, and planning future enhancements. This document is designed to comply with Section I-13 of the contract by providing a description of Westinghouse Hanford's cost and schedule control systems used in managing the above activities. 5 refs., 22 figs., 1 tab.

  20. Fault diagnostics system for helicopter main gearbox using wavelet neural network%基于小波神经网络的直升机主减速器故障诊断系统

    Institute of Scientific and Technical Information of China (English)

    刘立生; 杨宇航

    2012-01-01

    应用离散小波变换(DWT)和神经网络相结合构建直升机主减速器速器故障诊断系统:DWT对振动信号进行特征提取,神经网络对故障进行辨识和分类。阐述了DWT、帕塞瓦尔定理和广义回归神经网络(GRNN)基本理论,提出了直升机主减速器的故障诊断系统流程图,最后用某型直升机飞行时主减速器上的振动数据对该系统进行验证。实验使用了BPNN(back-propagation neural network)和GRNN两种神经网络,结果表明:提出的故障诊断系统能对主减速器故障进行较好的辨识和分类,这将为直升机主减速器故障诊断系统的进一步开发提供新的技术参考。%A fault diagnostics system for helicopter main gearbox (MGB) was construc- ted using discrete wavelet transform (DWT) and neural network, and the DWT was used to extract feature vectors and neural network was used for fault distinguish and classification. Firstly, the theory of DWT, Parseval theorem and GRNN were introduced, and then, the flowchart of fault diagnostics system for helicopter MGB was proposed, finally, the system was verified by the vibration data which were collected during helicopter flying, and both generalized regression neural network (GRNN) and back-propagation neural network (BPNN) were used and compared on the experimental platform. Experimental results indicate that the proposed diagnostics system can distinguish the MGB fault better, which would provide a new technical reference for the further development of helicopter MGB fault diagnostics system.

  1. 直升机振动主动控制的机身/压电叠层作动器耦合优化法%Coupled Fuselage/Piezoelectric Stack Actuator Optimization Method for Active Vibration Control of Helicopter

    Institute of Scientific and Technical Information of China (English)

    宋来收; 夏品奇

    2011-01-01

    Inertial actuators are usually used in active vibration control of helicopter, additional weight of which generally has to account for 4%-5% of fuselage weight to achieve satisfactory control effect. This paper proposes the use of lightweight piezoelectric stack actuators (PSA) for active vibration control of helicopter to reduce additional weight, and pres-entes a coupled fuselage/piezoelectric stack actuator optimization method. By using the sub-structure method based on frequency response functions, the coupled helicopter fuselage structure/piezoelectric stack actuator frequency domain equations are established. Setting the minimization of controlled acceleration responses as the objective, the installation locations of piezoelectric stack actuators and controller parameter optimization are investigated. Real-coded genetic algorithms are used to simultaneously optimize the variables of discrete locations and continuous control weighting parameters so as to obtain the most effective vibration suppression in the constrained range of control voltages. Numerical analysis and control simulation in the time domain for an elastic line model of a helicopter fuselage are performed. The results indicate that the method presented in this paper can effectively find the optimal parameters of vibration control and achieve significant effect of vibration suppression.%直升机振动主动控制通常使用惯性作动器,一般惯性作动器的附加重量要占到机体重量的4%~5%才有较好的控制效果.压电叠层作动器(PSA)作为轻质、高效的执行元件用于直升机振动主动控制可有效地降低附加重量、提高控制性能.本文将压电叠层作动器用于直升机振动主动控制,并提出了机身/压电叠层作动器耦合优化法.采用基于频率响应函数的子结构法建立了直升机机身结构/压电叠层作动器的耦合频域方程,以最小化被控加速度响应为目标研究了压电叠层作动器的安

  2. Development of Novel Methods for the Reduction of Noise and Weight in Helicopter Transmissions

    Science.gov (United States)

    Dimofte, Florin; Keith, Theo G., Jr.

    2003-01-01

    Over the 70-year evolution of the helicopter, man's understanding of vibration control has greatly increased. However, in spite of the increased performance, the extent of helicopter vibration problems has not significantly diminished. Crew vibration and noise remains important factors in the design of all current helicopters. With more complex and critical demands being placed on aircrews, it is essential that vibration and noise not impair their performance. A major source of helicopter cabin noise (which has been measured at a sound pressure level of over 100 dB) is the gearbox. Reduction of this noise has been a goal of NASA and the U.S. Army. Gear mesh noise is typically in the frequency range of 1000 to 3000 Hz, a range important for speech. A requirement for U.S. Army/NASA Advanced Rotorcraft Transmission project has been a 10-dB reduction compared to current designs. A combined analytical/experimental effort has been underway, since the end of the 80's, to study effects of design parameters on noise production. The noise generated by the gear mesh can be transmitted to the surrounding media through the bearings that support the gear shaft. Therefore, the use of fluid film bearings instead of rolling element bearings could reduce the transmission noise by 10 dB. In addition, the fluid film bearings that support the gear shaft can change the dynamics of the gear assembly by providing damping to the system and by being softer than rolling element bearings. Wave bearings can attenuate, and filter, the noise generated by a machine component due to the dynamic stiffness and damping coefficients. The attenuation ratio could be as large as 35-40 dB. The noise components at higher frequencies than a synchronous frequency can be almost eliminated.

  3. Nuclotron Control System

    Science.gov (United States)

    Volkov, V.; Gorchenko, V.; Kirichenko, A.; Kovalenko, A.; Kulikov, I.; Romanov, S.; Sveshnikov, B.; Vasilishin, B.

    1997-05-01

    The superconducting synchrotron named Nuclotron based on a miniature iron-shaped field SC-magnets was put into operation at the LHE JINR in 1993.The Nuclotron Control System (NCS) project,which is still under development,started in 1992 and has provided efficient support for the machine commissioning through all its phases.This paper presents the current status of the NCS. The control system architecture is hierarc- hical in nature and consists of two physical levels. High performance workstations,together with a general purpose server computers, are used at the top level.Workstations act as an operator consoles,while the servers provide massive disk data storage,printing utilities,a common database, program library and data exchange between Nuclotron and its experiments. The front-end level comprises as industrial com- puters equipped with I/O boards and data acquisition modules, as in- telligent CAMAC crate-controllers with embedded micro-PCs. NCS is distributed system,in which subsytems geographically separated by as much as 500 m.The total number of computers presently installed is 25. An Ethernet Local Area Network,which runs IPX/SPX and TCP/IP communi- cation protocols ,connects the console computers to the front-end le- vel and physicists workstations.

  4. Civil helicopter flight research. [for CH-53 helicopter

    Science.gov (United States)

    Snyder, W. J.; Schoultz, M. B.

    1976-01-01

    The paper presents a description of the NASA CH-53 Civil Helicopter Research Aircraft and discusses preliminary results of the aircraft flight research performed to evaluate factors and requirements for future helicopter transport operations. The CH-53 equipped with a 16-seat airline-type cabin and instrumented for flight research studies in noise, vibration, handling qualities, passenger acceptance, fuel utilization, terminal area maneuvers, and gust response. Predicted fuel usage for typical short-haul missions is compared with actual fuel use. Pilot ratings for an IFR handling quality task for three levels of stability augmentation are presented, and the effects of internal noise, vibration, and motion on passenger acceptance are discussed. Future planned CH-53 flight research within the Civil Helicopter Technology Program is discussed.

  5. Helicopter stability during aggressive maneuvers

    Science.gov (United States)

    Mohan, Ranjith

    The dissertation investigates helicopter trim and stability during level bank-angle and diving bank-angle turns. The level turn is moderate in that sufficient power is available to maintain level maneuver, and the diving turn is severe where the power deficit is overcome by the kinetic energy of descent. The investigation basically represents design conditions where the peak loading goes well beyond the steady thrust limit and the rotor experiences appreciable stall. The major objectives are: (1) to assess the sensitivity of the trim and stability predictions to the approximations in modeling stall, (2) to correlate the trim predictions with the UH-60A flight test data, and (3) to demonstrate the feasibility of routinely using the exact fast-Floquet periodic eigenvector method for mode identification in the stability analysis. The UH-60A modeling and analysis are performed using the comprehensive code RCAS (Army's Rotorcraft Comprehensive Analysis System). The trim and damping predictions are based on quasisteady stall, ONERA-Edlin (Equations Differentielles Lineaires) and Leishman-Beddoes dynamic stall models. From the correlation with the test data, the strengths and weaknesses of the trim predictions are presented.

  6. Helicopter blade-absorber system combination resonance research%直升机桨叶/吸振器系统的组合共振研究

    Institute of Scientific and Technical Information of China (English)

    周薇; 韩景龙

    2015-01-01

    应用 Lagrange 方程建立了直升机桨叶/吸振器系统的非线性振动模型,将一种规范型计算方法引入到桨叶/吸振器系统的组合共振研究,分析了该系统在发生组合共振时的稳定性和局部分岔特性。利用多尺度法求出系统平均方程,并对平均方程存在一对纯虚特征值与双零特征值的两类临界情形进行了研究,得到了系统的 Hopf 分岔解、分岔路径以及转迁曲线,给出了初始平衡解的稳定区域。对每一种情形,理论预测结果均与 Runge-Kutta 验证结果完全一致。%In the present paper,by using Lagrange equation,a nonlinear vibration model of helicopter blade-absorber system is established.The normal form method is introduced to the blade-absorber system for the combination resonance research,and through which,the stability and the local bifurcation characteristics of the blade-absorber system near combination resonance are analyzed.In order to derive the averaged equations,the method of multiple scales is applied,and then two kinds of critical points for the averaged equations are considered,which are characterized by a pair of purely imaginary eigenvalues and a pair of complex conjugate eigenvalues as well as a double zero eigenvalues.The Hopf bifurcation solution,bifurcation path,and tran-sition curves of the model are obtained respectively,and initial equilibrium stability region is given.For each case,the numeri-cal results obtained by Runge-Kutta method coincide with the analytical predictions.

  7. Helicopter Rotor Load Prediction Using a Geometrically Exact Beam with Multicomponent Model

    DEFF Research Database (Denmark)

    Lee, Hyun-Ku; Viswamurthy, S.R.; Park, Sang Chul

    2010-01-01

    rotor-blade/control-system model was loosely coupled with various inflow and wake models in order to simulate both hover and forward-flight conditions. The resulting rotor blade response and pitch link loads are in good agreement with those predicted byCAMRADII. The present analysis features both model......In this paper, an accurate structural dynamic analysis was developed for a helicopter rotor system including rotor control components, which was coupled to various aerodynamic and wake models in order to predict an aeroelastic response and the loads acting on the rotor. Its blade analysis was based...... on an intrinsic formulation of moving beams implemented in the time domain. The rotor control system was modeled as a combination of rigid and elastic components. A multicomponent analysis was then developed by coupling the beam finite element model with the rotor control system model to obtain a complete rotor-blade/control...

  8. Assistance system for helicopter pilots in the starting and landing phase; Assistenzsystem zur Unterstuetzung von Hubschrauberpiloten bei An- und Abflug

    Energy Technology Data Exchange (ETDEWEB)

    Rataj, J.; Bender, K.; Kohrs, R. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Braunschweig (Germany). Inst. fuer Flugfuehrung

    2001-07-01

    Pilot assistance systems as a rule serve to support the pilot in a single task and are independent of each other and of other board systems. The task of connecting the information and bridging the information gap between the single systems remains with the pilot. The contribution presents a new system which combines existing and new support functions in a single system with a standardized man-machine interface. All data acquired are combined in a central data pool connected with a database to provide a central information system. The new system takes account of human behaviour patterns and thus improves the man-machine interactions. [German] Das vorgestellte Unterstuetzungssystem verbessert die Sicherheit und Effizienz sowie die Umweltvertraeglichkeit beim An- und Abflug von Hubschraubern in bekanntem Gelaende durch einen neuen Ansatz beim Entwurf von Mensch-Maschine-Systemen (MMS). Moderne Systeme zur Unterstuetzung von Piloten werden bislang fuer die Loesung einer einzelnen Flugaufgabe, wie z.B. Autopilot oder Flugbahnplanung, unabhaengig von dem jeweiligen Missionsabschnitt sowie der weiteren Systeme an Bord ausgelegt. Die daraus entstehenden Grenzen im Informationsfluss zwischen den Einzelsystemen sind bei dieser Art der Auslegung von den Piloten zu ueberwinden. Das in diesem Artikel vorgestellte Unterstuetzungssystem fasst vorhandene und neue Unterstuetzungsfunktionen in einem System mit einer einheitlichen Mensch-Maschine-Schnittstelle (HMI) zusammen und hebt damit die Grenzen zwischen den Einzelsystemen auf. Die Sammlung der an Bord vorhandenen Informationen im zentralen Datenpool und dessen Verknuepfung mit einer Datenbank bilden die Wissensbasis des Unterstuetzungssystems, das zentrale Informationssystem. Der neue Ansatz bei der Auslegung des Unterstuetzungssystems traegt dem menschlichen Verhalten der Operateure bei Fuehrungs- und Steuerungsaufgaben Rechnung, woraus eine deutlich verbesserte Aufgabenteilung und Kooperation zwischen Mensch und Maschine

  9. MIRADAS control system

    Science.gov (United States)

    Rosich Minguell, Josefina; Garzón Lopez, Francisco

    2012-09-01

    The Mid-resolution InfRAreD Astronomical Spectrograph (MIRADAS, a near-infrared multi-object echelle spectrograph operating at spectral resolution R=20,000 over the 1-2.5μm bandpass) was selected in 2010 by the Gran Telescopio Canarias (GTC) partnership as the next-generation near-infrared spectrograph for the world's largest optical/infrared telescope, and is being developed by an international consortium. The MIRADAS consortium includes the University of Florida, Universidad de Barcelona, Universidad Complutense de Madrid, Instituto de Astrofísica de Canarias, Institut de Física d'Altes Energies, Institut d'Estudis Espacials de Catalunya and Universidad Nacional Autónoma de México. This paper shows an overview of the MIRADAS control software, which follows the standards defined by the telescope to permit the integration of this software on the GTC Control System (GCS). The MIRADAS Control System is based on a distributed architecture according to a component model where every subsystem is selfcontained. The GCS is a distributed environment written in object oriented C++, which runs components in different computers, using CORBA middleware for communications. Each MIRADAS observing mode, including engineering, monitoring and calibration modes, will have its own predefined sequence, which are executed in the GCS Sequencer. These sequences will have the ability of communicating with other telescope subsystems.

  10. Helicopter vibration and risk of reversible myopia among military air crews

    OpenAIRE

    Bastaman Basuki; T. Soemardoko

    2002-01-01

    We assessed to what extend the risk of reversible myopia of the different degree of helicopter vibrations and other risk factors among military helicopter pilots and flight engineers. The study was a nested case-control design using medical record at the Institute of Aerospace Medicine of the Indonesian Air Force and Medical Directorate of the Indonesian Army (Flying Wing). Cases and controls were military helicopter pilots and flight engineers who had ametropic visual acuity at the time of e...

  11. Integral Twist Actuation of Helicopter Rotor Blades for Vibration Reduction

    Science.gov (United States)

    Shin, SangJoon; Cesnik, Carlos E. S.

    2001-01-01

    Active integral twist control for vibration reduction of helicopter rotors during forward flight is investigated. The twist deformation is obtained using embedded anisotropic piezocomposite actuators. An analytical framework is developed to examine integrally-twisted blades and their aeroelastic response during different flight conditions: frequency domain analysis for hover, and time domain analysis for forward flight. Both stem from the same three-dimensional electroelastic beam formulation with geometrical-exactness, and axe coupled with a finite-state dynamic inflow aerodynamics model. A prototype Active Twist Rotor blade was designed with this framework using Active Fiber Composites as the actuator. The ATR prototype blade was successfully tested under non-rotating conditions. Hover testing was conducted to evaluate structural integrity and dynamic response. In both conditions, a very good correlation was obtained against the analysis. Finally, a four-bladed ATR system is built and tested to demonstrate its concept in forward flight. This experiment was conducted at NASA Langley Tansonic Dynamics Tunnel and represents the first-of-a-kind Mach-scaled fully-active-twist rotor system to undergo forward flight test. In parallel, the impact upon the fixed- and rotating-system loads is estimated by the analysis. While discrepancies are found in the amplitude of the loads under actuation, the predicted trend of load variation with respect to its control phase correlates well. It was also shown, both experimentally and numerically, that the ATR blade design has the potential for hub vibratory load reduction of up to 90% using individual blade control actuation. Using the numerical framework, system identification is performed to estimate the harmonic transfer functions. The linear time-periodic system can be represented by a linear time-invariant system under the three modes of blade actuation: collective, longitudinal cyclic, and lateral cyclic. A vibration

  12. From Self-Flying Helicopters to Classrooms of the Future

    Science.gov (United States)

    Young, Jeffrey R.

    2012-01-01

    On a summer day four years ago, a Stanford University computer-science professor named Andrew Ng held an unusual air show on a field near the campus. His fleet of small helicopter drones flew under computer control, piloted by artificial-intelligence software that could teach itself to fly after watching a human operator. By the end of the day,…

  13. Robust Helicopter Stabilization in the Face of Wind Disturbance

    DEFF Research Database (Denmark)

    A. Danapalasingam, Kumeresan; Leth, John-Josef; la Cour-Harbo, Anders

    2010-01-01

    When a helicopter is required to hover with minimum deviations from a desired position without measurements of an affecting persistent wind disturbance, a robustly stabilizing control action is vital. In this paper, the stabilization of the position and translational velocity of a nonlinear...

  14. 78 FR 24041 - Airworthiness Directives; Eurocopter France Helicopters

    Science.gov (United States)

    2013-04-24

    ... removal and inspection is required. The actions are intended to prevent vibration due to a failed bearing, failure of the T/R, and subsequent loss of control of the helicopter. DATES: This AD becomes effective May... identified in this AD, contact American Eurocopter Corporation, 2701 N. Forum Drive, Grand Prairie, TX 75052...

  15. 78 FR 58256 - Airworthiness Directives; Eurocopter France Helicopters

    Science.gov (United States)

    2013-09-23

    ... proposed actions are intended to prevent vibration due to a failed bearing, failure of the tail rotor, and subsequent loss of control of the helicopter. DATES: We must receive comments on this proposed AD by November..., contact American Eurocopter Corporation, 2701 N. Forum Drive, Grand Prairie, TX 75052; telephone (972) 641...

  16. Robust H∞ control for networked control systems

    Institute of Scientific and Technical Information of China (English)

    Ma Weiguo; Shao Cheng

    2008-01-01

    The robust H∞ control for networked control systems with both stochastic network-induced delay and data packet dropout is studied.When data are transmitted over network,the stochastic data packet dropout process can be described by a two-state Markov chain.The networked control systems with stochastic network-induced delay and data packet dropout are modeled as a discrete time Markov jump linear system with two operation modes.The sufficient condition of robust H∞ control for networked control systems stabilized by state feedback controller is presented in terms of linear matrix inequality.The state feedback controller can be constructed via the solution of a set of linear matrix inequalities.An example is given to verify the effectiveness of the method proposed.

  17. Optimization selection of sensors in active control of structural response for helicopter%直升机结构响应主动控制中传感器优选问题研究

    Institute of Scientific and Technical Information of China (English)

    陆洋; 顾仲权; 凌爱民

    2011-01-01

    Aiming at the optimization of sensors' number and locations in active control of structural response (ACSR) for helicopter, an optimization selection method was given out. The method can effectively reduce the number of sensors and find their relevant optimization locations, and at the same time the effect of vibration reduction maintains almost the same as before. So the control scale of hardware can be reduced distinctly. The optimization procedure was resolved with the genetic algorithm. Taking the Z11 light helicopter as an example, the effectiveness of the method was validated. The results show that using the optimization method, the best collocation scheme of sensors in ACSR can be achieved, with the fewest sensors and good effect of vibration reduction in all observed locations.%针对直升机结构响应主动振动控制问题,提出一种传感器优选方法,该方法能够在不减少待减振点数目的前提下,减少传感器数目并优化其位置,且保证系统全局减振效果基本不变,从而有效降低了整个控制系统的控制规模.优化过程采用遗传算法进行求解.以Z11直升机为例对该方法的有效性进行了验证.结果分析表明,利用该优选方法,能够得到传感器数目最少,且全局减振效果降低有限的传感器最优布置方案.

  18. A High-Order, Linear Time-Invariant Model for Application to Higher Harmonic Control and Flight Control System Interaction

    Science.gov (United States)

    Cheng, Rendy P.; Tischler, Mark B.; Celi, Roberto

    2006-01-01

    This research describes a new methodology for the extraction of a high-order, linear time invariant model, which allows the periodicity of the helicopter response to be accurately captured. This model provides the needed level of dynamic fidelity to permit an analysis and optimization of the AFCS and HHC algorithms. The key results of this study indicate that the closed-loop HHC system has little influence on the AFCS or on the vehicle handling qualities, which indicates that the AFCS does not need modification to work with the HHC system. However, the results show that the vibration response to maneuvers must be considered during the HHC design process, and this leads to much higher required HHC loop crossover frequencies. This research also demonstrates that the transient vibration responses during maneuvers can be reduced by optimizing the closed-loop higher harmonic control algorithm using conventional control system analyses.

  19. Impact Analysis on the Removal of Filter/Monitors from USN/USMC Helicopter in Flight Refueling Systems

    Science.gov (United States)

    2013-09-26

    water/contamination from being introduced into the airframe fuel system during HIFR from the air capable ships. Although fuel quality assurance...purposes, and in emergency situations to avoid ditching (e.g. a fouled deck, deck unsuitable for landing, aircraft too heavy, etc). At most

  20. 2.75 Inch Rocket/AH-1G Helicopter Weapons System Baseline Instrumentation Test Report. Volume 1,

    Science.gov (United States)

    1972-04-01

    network with sharper transduers while eliminating the e a d cost eut-of characteristics than thoe ordinarily supplied of complex arrier systems...chancX in the output proportional to the displacement. Both IF LOAD series of transduers are available in seven stroke W.e s rn .Cores ane available with

  1. 14 CFR Appendix C to Part 60 - Qualification Performance Standards for Helicopter Full Flight Simulators

    Science.gov (United States)

    2010-01-01

    ... graphic scaling or cause difficulties in scale interpretation or resolution. (4) Scaling on graphical... helicopter. The direction of movement of controls and switches must be identical to that in the...

  2. 58th SOW Low-Dust Helicopter Landing Zone Final Environmental Assessment

    Science.gov (United States)

    2012-11-01

    Gases HLZ Helicopter Landing Zone IICEP Interagency and Intergovernmental Coordination for Environmental Planning IFR Instrument Flight Rule IR...to Instrument Flight Rule ( IFR ) flights and to VFR flights in accordance with the airspace classification (FAA 2008). Controlled airspace is

  3. 77 FR 30232 - Airworthiness Directives; Bell Helicopter Textron Helicopters

    Science.gov (United States)

    2012-05-22

    ... Textron (BHT) Model 412, 412EP, and 412CF helicopters. This proposed AD is prompted by a reported failure... delay. We may change this proposal in light of the comments we receive. Discussion BHT has received a... develop on other products of the same type design. Related Service Information We reviewed BHT ASB 412-11...

  4. 77 FR 68055 - Airworthiness Directives; Bell Helicopter Textron Helicopters

    Science.gov (United States)

    2012-11-15

    ... are adopting a new airworthiness directive (AD) for Bell Helicopter Textron (BHT) Model 412, 412EP... 39 to include an AD that would apply to certain serial-numbered BHT Model 412, 412EP, and 412CF... AD and the Service Information The BHT ASBs require compliance within 100 hours of flight time for...

  5. 78 FR 9793 - Airworthiness Directives; Bell Helicopter Textron Helicopters

    Science.gov (United States)

    2013-02-12

    ..., Aerospace Engineer, FAA, Rotorcraft Directorate, Rotorcraft Certification Office, 2601 Meacham Blvd., Fort... helicopters, are susceptible to the same type of cracking because they are of similar design and manufacture... first. This AD does not require you to report a cracked fitting to the Rotorcraft Certification...

  6. 78 FR 1730 - Airworthiness Directives; Bell Helicopter Textron Inc. Helicopters

    Science.gov (United States)

    2013-01-09

    ...: We are adopting a new airworthiness directive (AD) for the Bell Helicopter Textron Inc. (BHTI) Model... (connector) can deteriorate, causing a short in the connector that may lead to a fire in the starter... short in the connector that may lead to a fire in the starter/generator, smoke in the cockpit...

  7. 78 FR 65195 - Airworthiness Directives; MD Helicopters, Inc. (MDHI) Helicopters

    Science.gov (United States)

    2013-10-31

    ... other helicopters of the same type designs and that air safety and the public interest require adopting... rotor blade (MRB) retention bolts (bolts) installed. This AD requires a daily check of the position of... (ASB SB900-116). ASB SB900-116 specifies a repetitive check of the blade retention bolts, part number...

  8. 78 FR 17591 - Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters

    Science.gov (United States)

    2013-03-22

    ... elements with 10 micron fuel filter elements at the next scheduled inspection or within 150 flight hours... identification plate, cross out the last two digits (``09'') of the ] existing fuel filter P/N 52-2145-009, and... helicopters to require replacing each forward and aft fuel system 40 micron fuel filter element with a...

  9. Concept and System of Personification Control System

    Institute of Scientific and Technical Information of China (English)

    Bai,Fengshuang; Yin,Yixin; Tu,Xuyan; Zhang,Ying

    2006-01-01

    This paper provides the system and conception of the Personification Control System (PCS) on the basis of Intelligent Control System based on Artificial life (ICS/AL), Artificial Emotion, Humanoid Control, and Intelligent Control System based on Field bus. According to system science and deciding of organize of biology, the Pyramid System of PCS are created. Then Pyramid System of PCS which is made up of PCS1/H, PCS1/S, PCS1/O, PCS1/C and PCS1/G is described.

  10. Guaranteed cost control for networked control systems

    Institute of Scientific and Technical Information of China (English)

    Linbo XIE; Huajing FANG; Ying ZHENG

    2004-01-01

    The guaranteed cost control problem for networked control systems (NCSs) is addressed under communication constraints and varying sampling rate. First of all, a simple information-scheduling scheme is presented to describe the scheduling approach of system signals in NCSs. Then, based on such a scheme and given sampling method, the design procedure in dynamic output feedback manner is also derived which renders the closed loop system to be asymptotically stable and guarantees an upper bound of the LQ performance cost function.

  11. Optically controlled welding system

    Science.gov (United States)

    Gordon, Stephen S. (Inventor)

    1989-01-01

    An optically controlled welding system (10) wherein a welding torch (12) having through-the-torch viewing capabilities is provided with an optical beam splitter (56) to create a transmitted view and a reflective view of a welding operation. These views are converted to digital signals which are then processed and utilized by a computerized robotic welder (15) to make the welding torch responsive thereto. Other features includes an actively cooled electrode holder (26) which minimizes a blocked portion of the view by virtue of being constructed of a single spoke or arm (28) and a weld pool contour detector (14) comprising a laser beam directed onto the weld pool with the position of specular radiation reflected therefrom being characteristic of a penetrated or unpenetrated condition of the weld pool.

  12. 变位齿轮在直升机传动系统中的应用研究%Application of Profile Shifted Gear in the Helicopter Transmission System

    Institute of Scientific and Technical Information of China (English)

    李英明; 沙发明; 黄康; 陈奇; 赵韩

    2013-01-01

    In order to study profile shifted gear in the helicopter transmission system,a pair of large ratio helicopter gear is studied.The influence of modification coefficient on gear tooth root sliding rate and contact ratio is studied,and the variation of profile shifted gear and master gear contact stress,bending stress is discussed.The results show that modification treatment can make the root sliding coefficient close,while the influence on contact ratio is small,the gear contact stress and bending stress are reduced.%为了研究变位齿轮在直升机传动系统中的应用,以一对大传动比的直升机齿轮对为例,研究变位系数对齿轮的齿根滑动系数和重合度的影响,并讨论变位和非变位齿轮的接触应力、弯曲应力变化情况.结果表明,变位处理可以使齿根滑动系数接近,同时对重合度影响较小,降低了齿轮的接触应力和弯曲应力.

  13. Smart actuation for helicopter rotorblades

    NARCIS (Netherlands)

    Paternoster, A.R.A.; Loendersloot, R.; Boer, de A.; Akkerman, R.; Berselli, G.; Vertechy, R.; Vassura, G.

    2012-01-01

    Successful rotorcrafts were only achieved when the differences between hovering flight conditions and a stable forward flight were understood. During hovering, the air speed on all helicopter blades is linearly distributed along each blade and is the same for each. However, during forward flight, th

  14. Helicopter Toy and Lift Estimation

    Science.gov (United States)

    Shakerin, Said

    2013-01-01

    A $1 plastic helicopter toy (called a Wacky Whirler) can be used to demonstrate lift. Students can make basic measurements of the toy, use reasonable assumptions and, with the lift formula, estimate the lift, and verify that it is sufficient to overcome the toy's weight. (Contains 1 figure.)

  15. Helicopter Toy and Lift Estimation

    Science.gov (United States)

    Shakerin, Said

    2013-01-01

    A $1 plastic helicopter toy (called a Wacky Whirler) can be used to demonstrate lift. Students can make basic measurements of the toy, use reasonable assumptions and, with the lift formula, estimate the lift, and verify that it is sufficient to overcome the toy's weight. (Contains 1 figure.)

  16. Smart actuation for helicopter rotorblades

    NARCIS (Netherlands)

    Paternoster, Alexandre; Loendersloot, Richard; de Boer, Andries; Akkerman, Remko; Berselli, G.; Vertechy, R.; Vassura, G.

    2012-01-01

    Successful rotorcrafts were only achieved when the differences between hovering flight conditions and a stable forward flight were understood. During hovering, the air speed on all helicopter blades is linearly distributed along each blade and is the same for each. However, during forward flight,

  17. Coordination control of distributed systems

    CERN Document Server

    Villa, Tiziano

    2015-01-01

    This book describes how control of distributed systems can be advanced by an integration of control, communication, and computation. The global control objectives are met by judicious combinations of local and nonlocal observations taking advantage of various forms of communication exchanges between distributed controllers. Control architectures are considered according to  increasing degrees of cooperation of local controllers:  fully distributed or decentralized controlcontrol with communication between controllers,  coordination control, and multilevel control.  The book covers also topics bridging computer science, communication, and control, like communication for control of networks, average consensus for distributed systems, and modeling and verification of discrete and of hybrid systems. Examples and case studies are introduced in the first part of the text and developed throughout the book. They include: control of underwater vehicles, automated-guided vehicles on a container terminal, contro...

  18. Division 1137 property control system

    Energy Technology Data Exchange (ETDEWEB)

    Pastor, D.J.

    1982-01-01

    An automated data processing property control system was developed by Mobile and Remote Range Division 1137. This report describes the operation of the system and examines ways of using it in operational planning and control.

  19. Support of Helicopter 'Free Flight' Operations in the 1996 Olympics

    Science.gov (United States)

    Branstetter, James R.; Cooper, Eric G.

    1996-01-01

    The microcosm of activity surrounding the 1996 Olympic Games provided researchers an opportunity for demonstrating state-of-the art technology in the first large-scale deployment of a prototype digital communication/navigation/surveillance system in a confined environment. At the same time it provided an ideal opportunity for transportation officials to showcase the merits of an integrated transportation system in meeting the operational needs to transport time sensitive goods and provide public safety services under real-world conditions. Five aeronautical CNS functions using a digital datalink system were chosen for operational flight testing onboard 91 aircraft, most of them helicopters, participating in the Atlanta Short-Haul Transportation System. These included: GPS-based Automatic Dependent Surveillance, Cockpit Display of Traffic Information, Controller-Pilot Communications, Graphical Weather Information (uplink), and Automated Electronic Pilot Reporting (downlink). Atlanta provided the first opportunity to demonstrate, in an actual operating environment, key datalink functions which would enhance flight safety and situational awareness for the pilot and supplement conventional air traffic control. The knowledge gained from such a large-scale deployment will help system designers in development of a national infrastructure where aircraft would have the ability to navigate autonomously.

  20. Generic device controller for accelerator control systems

    Energy Technology Data Exchange (ETDEWEB)

    Mariotti, R.; Buxton, W.; Frankel, R.; Hoff, L.

    1987-01-01

    A new distributed intelligence control system has become operational at the AGS for transport, injection, and acceleration of heavy ions. A brief description of the functionality of the physical devices making up the system is given. An attempt has been made to integrate the devices for accelerator specific interfacing into a standard microprocessor system, namely, the Universal Device Controller (UDC). The main goals for such a generic device controller are to provide: local computing power; flexibility to configure; and real time event handling. The UDC assemblies and software are described. (LEW)

  1. On Restructurable Control System Theory

    Science.gov (United States)

    Athans, M.

    1983-01-01

    The state of stochastic system and control theory as it impacts restructurable control issues is addressed. The multivariable characteristics of the control problem are addressed. The failure detection/identification problem is discussed as a multi-hypothesis testing problem. Control strategy reconfiguration, static multivariable controls, static failure hypothesis testing, dynamic multivariable controls, fault-tolerant control theory, dynamic hypothesis testing, generalized likelihood ratio (GLR) methods, and adaptive control are discussed.

  2. Some thoughts on the implementation of pilot night vision devices for helicopters

    Science.gov (United States)

    Tucker, G. E.

    1984-01-01

    Night vision enhancement devices greatly expand the range and quality of services by extending night operational capabilities. Evolving military tactical concepts for helicopters survivability and battlefield effectiveness necessitate nap-of-the-earth (NOE) flying under both day and night conditions. From a pilot workload standpoint, flying a helicopter NOE in day VFR conditions with minimum clearance between rotors and obstacles is quite demanding. Doing the same job at night is several times more difficult. There are two general categories of night vision devices in operation in helicopter aviation: the Night Vision Goggles (NVG) and forward looking infrared (FLIR) system. The capabilities and limitations of those two devices are discussed.

  3. CONTROLLABILITY OF IOTA-2-SYSTEMS

    NARCIS (Netherlands)

    FAGNANI, F; WILLEMS, JC

    1992-01-01

    This paper is devoted to an investigation of controllability and almost controllability of l2-systems. These concepts are defined in terms of the possibility of steering one system trajectory to another. It is proved that a controllable l2-system always has finite memory The main result on almost co

  4. Networked control of microgrid system of systems

    Science.gov (United States)

    Mahmoud, Magdi S.; Rahman, Mohamed Saif Ur; AL-Sunni, Fouad M.

    2016-08-01

    The microgrid has made its mark in distributed generation and has attracted widespread research. However, microgrid is a complex system which needs to be viewed from an intelligent system of systems perspective. In this paper, a network control system of systems is designed for the islanded microgrid system consisting of three distributed generation units as three subsystems supplying a load. The controller stabilises the microgrid system in the presence of communication infractions such as packet dropouts and delays. Simulation results are included to elucidate the effectiveness of the proposed control strategy.

  5. Classification Trees and the Analysis of Helicopter Vibration Data

    OpenAIRE

    Larson, Harold J.

    1997-01-01

    Health and Usage Monitoring Systems are receiving a great deal of interest, in an attempt to increase the safety and operational readiness of helicopters, and to minimize maintenance costs. These systems monitor (and can record) various flight parameters, pilot conversations, engine exhaust debris, metallic chip detector levels in the lubrication system, rotor track and balance, as well as vibration levels at selected locations throughout the airframe and the power drive system. Vibration lev...

  6. Helicopter pilot back pain: a preliminary study.

    Science.gov (United States)

    Shanahan, D F; Reading, T E

    1984-02-01

    Because of the high prevalence of back pain experienced by U.S. Army helicopter pilots, a study was conducted to ascertain the feasibility of reproducing these symptoms in the laboratory. A mock-up of a UH-1H seat and control configuration was mounted to a multi-axis vibration simulator (MAVS). Eleven subjects were tested on the apparatus for two 120-min periods. During one period, the MAVS was programmed to reproduce vibrations recorded from a UH-1H in cruise flight. The subjects received no vibration during the other test period. All subjects reported back pain which they described as identical to the pain they experience during flight, during one or more of their test periods. There was no statistical difference between the vibration and nonvibration test conditions (p greater than 0.05) in terms of time of onset of pain or intensity of pain as measured by a visual analog scale. It appears the vibration at the frequencies and amplitudes tested plays little or no role in the etiology of the back symptoms reported by these pilots. It is proposed that the primary etiological factor for these symptoms is the poor posture pilots are obliged to assume for extended periods while operating helicopters.

  7. Analysis of potential helicopter vibration reduction concepts

    Science.gov (United States)

    Landgrebe, A. J.; Davis, M. W.

    1984-01-01

    Several recent helicopter vibration reduction research programs are described. Results of studies of blade design parameters in rotor vibratory response and of an advanced blade design for reduced vibration are examined. An optimization approach to develop a general automated procedure for rotor blade design is described, and analytical results for an articulated rotor operating at a steady 160 kt flight condition are reported. The use of a self-adaptive controller to implement higher harmonic control in closed-loop fashion is addressed, and a computer simulation used to evaluate and compare the performance of alternative algorithms included in the generic active controller is discussed. Results are presented for steady level flight conditions, short-duration maneuvers, blade stresses and rotor performance, blade-appended aeroelastic devices, vibratory airloads, wake-induced blade airloads, and airloads from blade motions, the interaction of rotor and fuselage, and the interaction of rotor and empennage.

  8. System for controlling apnea

    Science.gov (United States)

    Holzrichter, John F

    2015-05-05

    An implanted stimulation device or air control device are activated by an external radar-like sensor for controlling apnea. The radar-like sensor senses the closure of the air flow cavity, and associated control circuitry signals (1) a stimulator to cause muscles to open the air passage way that is closing or closed or (2) an air control device to open the air passage way that is closing or closed.

  9. Managing the inventory control system.

    Science.gov (United States)

    Daniels, C E

    1985-02-01

    The four functions of management--planning, organizing, directing, and controlling--are described in relation to the hospital pharmacy inventory control system. Planning includes the development of inventory system objectives and identification of the resources needed to complete them. Organizing requires the manager to decide on the best method of grouping system activities and resources to complete the objectives in order of priority. Directing is a continual activity that involves obtaining optimal performance from the inventory system resources available. Controlling consists of regulation and verification of inventory system activities. The effective inventory system manager integrates planning, organizing, directing, and controlling in a continuous cycle.

  10. 直升机尾传动系统扭转振动建模与特性%Torsional vibration characteristics analyzing and modeling for helicopter tail drive system

    Institute of Scientific and Technical Information of China (English)

    朱自冰; 朱如鹏; 鲍和云

    2013-01-01

    The helicopter tail drive system was simplified to a series system with shaft section and equivalent disk.A equivalent dynamic analysis model with multiple degrees of freedom, in which the transmission error of meshing gear pair and meshing stiffness of tail-decelerated gear were included, was established for this simplified helicopter tail drive system.According to the torsional dynamics equation of helicopter tail drive system, the torsional vibration response of system was obtained, and the torsional vibration characteristics of the system with different torsional stiffness of the shaft and meshing stiffness of the gear were discussed.The following conclusions may be drawn from the analysis result.The torsional displacement of tail rotor is larger than the torsional displacement of driven gear of tail gearbox, namely the vibration response of output gear of tail gear box is larger than the input gear.The variation tendency is opposite of the torsional angle displacement between the equivalent disk connected to the horizontal shaft and oblique shaft respectively.The meshing stiffness has more influence on the system than the shaft torsional stiffness, it should be taken account into the modeling of helicopter tail drive system.%将直升机传动系统简化为轴段和当量圆盘的串联系统,建立了直升机尾传动系统扭转振动的等效多自由度动力学模型.模型中考虑了啮合齿轮对的综合啮合误差激励和尾减齿轮的啮合刚度,针对系统的扭转动力学方程,求得了系统的扭转振动响应,分析了直升机尾传动系统在轴的不同扭转刚度和齿轮的不同啮合刚度下的扭转振动的特性,结果表明:与尾斜轴相联的当量圆盘的扭转角位移始终比与水平轴相联的当量圆盘的扭转角位移的数值大,即与尾斜轴相联的尾减输出齿轮振动大于输入齿轮;当轴的扭转刚度变化时,水平轴相联的当量圆盘与尾斜轴相联的当量

  11. Hybrid spacecraft attitude control system

    Directory of Open Access Journals (Sweden)

    Renuganth Varatharajoo

    2016-02-01

    Full Text Available The hybrid subsystem design could be an attractive approach for futurespacecraft to cope with their demands. The idea of combining theconventional Attitude Control System and the Electrical Power System ispresented in this article. The Combined Energy and Attitude ControlSystem (CEACS consisting of a double counter rotating flywheel assemblyis investigated for small satellites in this article. Another hybrid systemincorporating the conventional Attitude Control System into the ThermalControl System forming the Combined Attitude and Thermal ControlSystem (CATCS consisting of a "fluid wheel" and permanent magnets isalso investigated for small satellites herein. The governing equationsdescribing both these novel hybrid subsystems are presented and theironboard architectures are numerically tested. Both the investigated novelhybrid spacecraft subsystems comply with the reference missionrequirements.The hybrid subsystem design could be an attractive approach for futurespacecraft to cope with their demands. The idea of combining theconventional Attitude Control System and the Electrical Power System ispresented in this article. The Combined Energy and Attitude ControlSystem (CEACS consisting of a double counter rotating flywheel assemblyis investigated for small satellites in this article. Another hybrid systemincorporating the conventional Attitude Control System into the ThermalControl System forming the Combined Attitude and Thermal ControlSystem (CATCS consisting of a "fluid wheel" and permanent magnets isalso investigated for small satellites herein. The governing equationsdescribing both these novel hybrid subsystems are presented and theironboard architectures are numerically tested. Both the investigated novelhybrid spacecraft subsystems comply with the reference missionrequirements.

  12. 78 FR 34958 - Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell), Model Helicopters

    Science.gov (United States)

    2013-06-11

    ... 412CF helicopter or on a Model 412 or 412EP helicopter with a (BHT-412-SI-62) slope landing kit, P/N 412... installed on a Model 412 or 412EP helicopter with a (BHT-412-SI-62) slope landing kit, P/N 412-704-012-101...

  13. 78 FR 23688 - Airworthiness Directives; Bell Helicopter Textron Canada Inc. Helicopters

    Science.gov (United States)

    2013-04-22

    ... Bell Helicopter Textron Canada Inc. (BHT) Model 206A, 206B, and 206L helicopters. This proposed AD...-2012-19), to correct an unsafe condition for certain serial numbered BHT Model 206A, 206B, and 206L... Information BHT has issued Alert Service Bulletin (ASB) No. 206-11-127 for Model 206A and 206B helicopters and...

  14. 78 FR 54751 - Airworthiness Directives; Bell Helicopter Textron Canada Inc. Helicopters

    Science.gov (United States)

    2013-09-06

    ... new airworthiness directive (AD) for certain Bell Helicopter Textron Canada Inc. (BHT) Model 206A... 14 CFR part 39 to include an AD that would apply to BHT Model 206A and 206B helicopters, all serial... assembly) part number (P/N) 206-375-017-101 installed and BHT Model 206L helicopters, S/N 45001 through...

  15. Diagnostic, reliablility and control systems

    CERN Document Server

    Leondes

    2014-01-01

    1. Explicit-Model-Based Fault Detection Method in Industrial Plants 2. Soft Sensor: An Effective Approach to Improve Control 3. Techniques in Soft Computing and Their Utilization in Mechatronic Products 4. Techniques in the Control of Interconnected Plants 5. A Mechatronic Systems Approach to Controlling Robotic Systems with Actuator Dynamics 6. Process and Control Design for Fast Coordinate Measuring Machines 7. Techniques in the Stability of Mechatronic Systems with Sensor or Actuator Failure.

  16. Helicopter Parenting and Related Issues: Psychological Well Being, Basic Psychological Needs and Depression on University Students

    OpenAIRE

    Okray, Zihniye

    2016-01-01

    Helicopter parenting is not a new dimension of parenting but it is a parenting that involves hovering parents who are potentially over-involved in the lives of their child. (Padilla-Walker, Nelson, 2012) Helicopter parenting is a unique phenomenon (Odenweller et al, 2014) and unique form of parental control (Willoughby et al., 2013) which can be described as highly involved, intensive, a hands-on method. (Schiffrin et al, 2014) In this study, university students examined about their parental ...

  17. Improving aviation safety with information visualization: Airflow hazard display for helicopter pilots

    Science.gov (United States)

    Aragon, Cecilia Rodriguez

    Many aircraft accidents each year are caused by encounters with airflow hazards near the ground, such as vortices or other turbulence. While such hazards frequently pose problems to fixed-wing aircraft, they are especially dangerous to helicopters, whose pilots often have to operate into confined areas or under operationally stressful conditions. Pilots are often unaware of these invisible hazards while simultaneously attending to other aspects of aircraft operation close to the ground. Recent advances in aviation sensor technology offer the potential for aircraft-based sensors that can gather large amounts of airflow velocity data in real time. This development is likely to lead to the production of onboard detection systems that can convey detailed, specific information about imminent airflow hazards to pilots. A user interface is required that can present extensive amounts of data to the pilot in a useful manner in real time, yet not distract from the pilot's primary task of flying the aircraft. In this dissertation, we address the question of how best to present safety-critical visual information to a cognitively overloaded user in real time. We designed an airflow hazard visualization system according to user-centered design principles, implemented the system in a high fidelity, aerodynamically realistic rotorcraft flight simulator, and evaluated it via usability studies with experienced military and civilian helicopter pilots. We gathered both subjective data from the pilots' evaluations of the visualizations, and objective data from the pilots' performance during the landing simulations. Our study demonstrated that information visualization of airflow hazards, when presented to helicopter pilots in the simulator, dramatically improved their ability to land safely under turbulent conditions. Although we focused on one particular aviation application, the results may be relevant to user interfaces and information visualization in other safety

  18. Dynamic Stability Analysis for Helicopter Rotor/Fuselage Coupled Nonlinear Systems%直升机旋翼/机体耦合非线性系统的动稳定性分析

    Institute of Scientific and Technical Information of China (English)

    胡国才; 向锦武; 张晓谷

    2003-01-01

    为了准确反映直升机旋翼/机体耦合系统的动稳定性,建立了旋翼/机体耦合非线性动力学微分方程,在时域内求解微分方程得到各片桨叶的挥舞、摆振及机体的响应用以对系统进行数值模拟;为了获得系统稳定性的定量值,用快速傅立叶变换(FFT)确定模态频率,用基于傅立叶级数的移动矩形窗方法得到模态阻尼.地面共振分析表明,时域分析与特征值分析结果具有良好的相关性,并与试验值吻合,从而验证了该方法的有效性.大总距时,用时域分析得到的模态阻尼与试验值吻合得更好,该方法可用于具有非线性减摆器的直升机旋翼/机体耦合系统的动稳定性分析.%In order to accurately predict the dynamic instabilities of a helicopter rotor/fuselage coupled system, nonlinear differential equations are derived and integrated in the time domain to yield responses of rotor blade flapping, lead-lag and fuselage motions to simulate the behavior of the system numerically. To obtain quantitative instabilities, Fast Fourier Transform (FFT) is conducted to estimate the modal frequencies, and Fourier series based moving-block analysis is employed in the predictions of the modal damping in terms of the response time history. Study on the helicopter ground resonance exhibits excellent correlation among the time-domain (TD) analytical results, eigenvalues and wind tunnel test data, thus validating the methodology of the paper. With a large collective pitch set, the predictions of regressive lag modal damping from TD analysis correlate with the experimental data better than from eigen analysis. TD analysis can be applied in the dynamic stability analysis of helicopter rotor/fuselage coupled systems incorporated with nonlinear blade lag dampers.

  19. Proposed health state awareness of helicopter blades using an artificial neural network strategy

    Science.gov (United States)

    Lee, Andrew; Habtour, Ed; Gadsden, S. A.

    2016-05-01

    Structural health prognostics and diagnosis strategies can be classified as either model or signal-based. Artificial neural network strategies are popular signal-based techniques. This paper proposes the use of helicopter blades in order to study the sensitivity of an artificial neural network to structural fatigue. The experimental setup consists of a scale aluminum helicopter blade exposed to transverse vibratory excitation at the hub using single axis electrodynamic shaker. The intent of this study is to optimize an algorithm for processing high-dimensional data while retaining important information content in an effort to select input features and weights, as well as health parameters, for training a neural network. Data from accelerometers and piezoelectric transducers is collected from a known system designated as healthy. Structural damage will be introduced to different blades, which they will be designated as unhealthy. A variety of different tests will be performed to track the evolution and severity of the damage. A number of damage detection and diagnosis strategies will be implemented. A preliminary experiment was performed on aluminum cantilever beams providing a simpler model for implementation and proof of concept. Future work will look at utilizing the detection information as part of a hierarchical control system in order to mitigate structural damage and fatigue. The proposed approach may eliminate massive data storage on board of an aircraft through retaining relevant information only. The control system can then employ the relevant information to intelligently reconfigure adaptive maneuvers to avoid harmful regimes, thus, extending the life of the aircraft.

  20. Space Shuttle flight control system

    Science.gov (United States)

    Klinar, W. J.; Kubiak, E. T.; Peters, W. H.; Saldana, R. L.; Smith, E. E., Jr.; Stegall, H. W.

    1975-01-01

    The Space Shuttle is a control stabilized vehicle with control provided by an all digital, fly-by-wire flight control system. This paper gives a description of the several modes of flight control which correspond to the Shuttle mission phases. These modes are ascent flight control (including open loop first stage steering, the use of four computers operating in parallel and inertial guidance sensors), on-orbit flight control (with a discussion of reaction control, phase plane switching logic, jet selection logic, state estimator logic and OMS thrust vector control), entry flight control and TAEM (terminal area energy management to landing). Also discussed are redundancy management and backup flight control.

  1. RESEARCH ON SCHEME OF HIGH-SPEED ROTOR/WING TRANSITION HELICOPTER RD15

    Institute of Scientific and Technical Information of China (English)

    WANGHuan-jin; GAOZheng

    2004-01-01

    To analyze the existing schemes of high-speed rotorcrafts and some new technologies, a new conceptual sketch of the high-speed rotor/wing transition helicopter RD15 is proposed. The overall layout of the RD15 is given out and the transition process from the helicopter mode to the airplane mode is designed. The lift system consists of a circular disk-wing with four retractable blades. The technology of individual blade control is adopted for flight control in hover and low speed flight. The tail is a vectored thrust duct propeller. It can provide the anti-torque in hover, and offer the multi-directional controls and propulsion drive for the airplane mode flight. The aerodynamic characteristics and key technologies in the transition process for this layout, including the nose up angle of disk-wing, the length of the blade, rotation speed, pitch angle and other parameters, are theoretically ana lyzed and experimentally tested. Calculation and experiments show that the shift process of the lift, the power and controls are smooth, and the designed scheme is feasible.

  2. Hierarchical flight control system synthesis for rotorcraft-based unmanned aerial vehicles

    Science.gov (United States)

    Shim, Hyunchul

    The Berkeley Unmanned Aerial Vehicle (UAV) research aims to design, implement, and analyze a group of autonomous intelligent UAVs and UGVs (Unmanned Ground Vehicles). The goal of this dissertation is to provide a comprehensive procedural methodology to design, implement, and test rotorcraft-based unmanned aerial vehicles (RUAVs). We choose the rotorcraft as the base platform for our aerial agents because it offers ideal maneuverability for our target scenarios such as the pursuit-evasion game. Aided by many enabling technologies such as lightweight and powerful computers, high-accuracy navigation sensors and communication devices, it is now possible to construct RUAVs capable of precise navigation and intelligent behavior by the decentralized onboard control system. Building a fully functioning RUAV requires a deep understanding of aeronautics, control theory and computer science as well as a tremendous effort for implementation. These two aspects are often inseparable and therefore equally highlighted throughout this research. The problem of multiple vehicle coordination is approached through the notion of a hierarchical system. The idea behind the proposed architecture is to build a hierarchical multiple-layer system that gradually decomposes the abstract mission objectives into the physical quantities of control input. Each RUAV incorporated into this system performs the given tasks and reports the results through the hierarchical communication channel back to the higher-level coordinator. In our research, we provide a theoretical and practical approach to build a number of RUAVs based on commercially available navigation sensors, computer systems, and radio-controlled helicopters. For the controller design, the dynamic model of the helicopter is first built. The helicopter exhibits a very complicated multi-input multi-output, nonlinear, time-varying and coupled dynamics, which is exposed to severe exogenous disturbances. This poses considerable difficulties for

  3. Distribution of the 134Cs/137Cs ratio around the Fukushima Daiichi nuclear power plant using an unmanned helicopter radiation monitoring system

    Science.gov (United States)

    Torii, T.; Nishizawa, Y.

    2015-12-01

    Many radioactive substances were released by the Fukushima Daiichi nuclear power plant accident occurred on March 11, 2011 in the atmosphere. A lot of short half-life nuclides which are 131I, 132Te (132I) and 133I, etc., in addition to longer half-lived nuclides such as 134Cs and 137Cs. The estimated release amount of these nuclides from the reactor 1st to 3rd unit is reported, but it's found to be quite different in the short half-lived nuclides by the reactor units. Because the radioactivity ratio of 134Cs and 137Cs was slight different between the reactor units, it can be considered that the valuable source is obtained by the measurement of 134Cs/137Cs ratio in the environment around the Fukushima Daiichi nuclear power station at the present stage when the nuclides with short half-lives had already decayed. We have measured high-resolution gamma-ray spectrum using an unmanned helicopter equipped with LaBr3(Ce) detector in a 3-km range from the power station which was near to the release source of the radioactive cesium. Because the LaBr3(Ce) detector has high resolution of gamma rays, the discrimination of many nuclides is possible. In addition, there is extremely much number of the data provided by the distribution measurement with the unmanned helicopter. Because a new map was illustrated by the analysis of the 134Cs/137Cs ratio, we report the outline.

  4. D0 Cryo System Control System Autodialer

    Energy Technology Data Exchange (ETDEWEB)

    Urbin, J.; /Fermilab

    1990-04-17

    The DO cryogenic system is controlled by a TI565-PLC based control system. This allows the system to be unmanned when in steady state operation. System experts will need to be contacted when system parameters exceed normal operating points and reach alarm setpoints. The labwide FIRUS system provides one alarm monitor and communication link. An autodialer provides a second and more flexible alarm monitor and communication link. The autodialer monitors contact points in the control system and after receiving indication of an alarm accesses a list of experts which it calls until it receives an acknowledgement. There are several manufacturers and distributors of autodialer systems. This EN explains the search process the DO cryo group used to fmd an autodialer system that fit the cryo system's needs and includes information and specs for the unit we chose.

  5. Identification of helicopter rotor dynamic models

    Science.gov (United States)

    Molusis, J. A.; Bar-Shalom, Y.; Warmbrodt, W.

    1983-01-01

    A recursive, extended Kalman-filter approach is applied to the identifiction of rotor damping levels of representative helicopter dynamic systems. The general formulation of the approach is presented in the context of a typically posed stochastic estimation problem, and the method is analytically applied to determining the damping levels of a coupled rotor-body system. The identified damping covergence characteristics are studied for sensitivity to both constant-coefficient and periodic-coefficient measurement models, process-noise covariance levels, and specified initial estimates of the rotor-system damping. A second application of the method to identifying the plant model for a highly damped, isolated flapping blade with a constant-coefficient state model (hover) and a periodic-coefficient state model (forward flight) is also investigated. The parameter-identification capability is evaluated for the effect of periodicity on the plant model coefficients and the influence of different measurement noise levels.

  6. Possibilities of Thermal Systems Control

    Directory of Open Access Journals (Sweden)

    Renata WAGNEROVÁ

    2009-06-01

    Full Text Available This contribution describes different approaches to thermal system control. Not only PID control but also sliding mode controls were used. In addition the different modifications of sliding mode control were used, such as extension with integral element or continuous substitution of sign function. Considering the thermal system allows applying cooling element, the control algorithm using cooling and heating parts was tested too. All designed algorithms were verified with help of computer simulation and also directly on laboratory stand. All used control algorithms ensured required temperature but with different control quality.

  7. Lytic spondylolisthesis in helicopter pilots.

    Science.gov (United States)

    Froom, P; Froom, J; Van Dyk, D; Caine, Y; Ribak, J; Margaliot, S; Floman, Y

    1984-06-01

    Trauma to the back from the force of chronic stress is thought to be an etiologic factor in isthmic spondylolisthesis (SLL). The relationship of first degree spondylolisthesis to low back pain (LBP) is controversial. We compare the prevalence of SLL in helicopter pilots who are subject to strong vibrational forces, with other airforce personnel. Helicopter pilots had more than a four times higher prevalence of SLL (4.5%) than did cadets (1.0%) and transport pilots (0.9%). Low back pain was more frequent in pilots with SLL than in those without this lesion but in no case was the pain disabling or the defect progressive. We conclude that SLL may be induced by vibrational forces and although SLL is associated with LBP, the pain was little clinical significance.

  8. Critical Technology Events in the Development of the Apache Helicopter. Project Hindsight Revisited

    Science.gov (United States)

    2006-02-01

    weapons systems also benefited the Apache. Among these advances were a common module approach to FLIR production and a minimum resolvable temperature ( MRT ...determination as a way to measure FLIR performance. Also, it should be noted that for the Apache, with the work on the MRT as a foundation, the U.S...Industry’s creative work on the T700 series of helicopter engines is an example. 3. The Army experiences with helicopters in Vietnam had a strong

  9. Delays and networked control systems

    CERN Document Server

    Hetel, Laurentiu; Daafouz, Jamal; Johansson, Karl

    2016-01-01

    This edited monograph includes state-of-the-art contributions on continuous time dynamical networks with delays. The book is divided into four parts. The first part presents tools and methods for the analysis of time-delay systems with a particular attention on control problems of large scale or infinite-dimensional systems with delays. The second part of the book is dedicated to the use of time-delay models for the analysis and design of Networked Control Systems. The third part of the book focuses on the analysis and design of systems with asynchronous sampling intervals which occur in Networked Control Systems. The last part of the book exposes several contributions dealing with the design of cooperative control and observation laws for networked control systems. The target audience primarily comprises researchers and experts in the field of control theory, but the book may also be beneficial for graduate students. .

  10. ON COMPLEX DYNAMIC CONTROL SYSTEMS

    Institute of Scientific and Technical Information of China (English)

    CHENG Daizhan

    2003-01-01

    This paper presents some recent works on the control of dynamic systems, which have certain complex properties caused by singularity of the nonlinear structures, structure-varyings, or evolution process etc. First, we consider the structure singularity of nonlinear control systems. It was revealed that the focus of researches on nonlinear control theory is shifting from regular systems to singular systems. The singularity of nonlinear systems causes certain complexity. Secondly, the switched systems are considered. For such systems the complexity is caused by the structure varying. We show that the switched systems have significant characteristics of complex systems. Finally, we investigate the evolution systems. The evolution structure makes complexity, and itself is a proper model for complex systems.

  11. Control integral systems; Sistemas integrales de control

    Energy Technology Data Exchange (ETDEWEB)

    Burgos, Estrella [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1998-12-31

    Almost two third of the electric power generation in Mexico are obtained from hydrocarbons, for that reasons Comision Federal de Electricidad (CFE) dedicated special commitment in modernizing the operation of fossil fuel central stations. In attaining this objective the control systems play a fundamental roll, from them depend a good share of the reliability and the efficiency of the electric power generation process, as well as the extension of the equipment useful life. Since 1984 the Instituto de Investigaciones Electricas (IIE) has been working, upon the request of CFE, on the development of digital control systems. To date it has designed and implemented a logic control system for gas burners, which controls 32 burners of the Unit 4 boiler of the Generation Central of Valle de Mexico and two systems for distributed control for two combined cycle central stations, which are: Dos Bocas, Veracruz Combined cycle central, and Gomez Palacio, Durango combined cycle central. With these two developments the IIE enters the World tendency of implementing distributed control systems for the fossil fuel power central update [Espanol] Casi las dos terceras partes de la generacion electrica en Mexico se obtienen a partir de hidrocarburos, es por eso que la Comision Federal de Electricidad (CFE) puso especial empeno en modernizar la operacion de las centrales termoelectricas de combustibles fosiles. En el logro de este objetivo los sistemas de control desempenan un papel fundamental, de ellos depende una buena parte la confiabilidad y la eficiencia en el proceso de generacion de energia electrica, asi como la prolongacion de la vida util de los equipos. Desde 1984 el Instituto de Investigaciones Electricas (IIE) ha trabajado, a solicitud de la CFE, en el desarrollo de sistemas digitales de control. A la fecha se han disenado e implantado un sistema de control logico de quemadores de gas, el cual controla 32 quemadores de la caldera de la unidad 4 de la central de generacion

  12. Optimal Control of Mechanical Systems

    OpenAIRE

    Vadim Azhmyakov

    2007-01-01

    In the present work, we consider a class of nonlinear optimal control problems, which can be called “optimal control problems in mechanics.” We deal with control systems whose dynamics can be described by a system of Euler-Lagrange or Hamilton equations. Using the variational structure of the solution of the corresponding boundary-value problems, we reduce the initial optimal control problem to an auxiliary problem of multiobjective programming. This technique makes it possible to apply some ...

  13. Asynchronous control for networked systems

    CERN Document Server

    Rubio, Francisco; Bencomo, Sebastián

    2015-01-01

    This book sheds light on networked control systems; it describes different techniques for asynchronous control, moving away from the periodic actions of classical control, replacing them with state-based decisions and reducing the frequency with which communication between subsystems is required. The text focuses specially on event-based control. Split into two parts, Asynchronous Control for Networked Systems begins by addressing the problems of single-loop networked control systems, laying out various solutions which include two alternative model-based control schemes (anticipatory and predictive) and the use of H2/H∞ robust control to deal with network delays and packet losses. Results on self-triggering and send-on-delta sampling are presented to reduce the need for feedback in the loop. In Part II, the authors present solutions for distributed estimation and control. They deal first with reliable networks and then extend their results to scenarios in which delays and packet losses may occur. The novel ...

  14. When is the helicopter faster? A comparison of helicopter and ground ambulance transport times.

    Science.gov (United States)

    Diaz, Marco A; Hendey, Gregory W; Bivins, Herbert G

    2005-01-01

    A retrospective analysis of 7,854 ground ambulance and 1,075 helicopter transports was conducted. The 911-hospital arrival intervals for three transport methods were compared: ground, helicopter dispatched simultaneously with ground unit, and helicopter dispatched nonsimultaneously after ground unit response. Compared with ground transports, simultaneously dispatched helicopter transports had significantly shorter 911-hospital arrival intervals at all distances greater than 10 miles from the hospital. Nonsimultaneously dispatched helicopter transport was significantly faster than ground at distances greater than 45 miles, and simultaneous helicopter dispatch was faster than nonsimultaneous at virtually all distances. Ground transport was significantly faster than either air transport modality at distances less than 10 miles from the hospital. Ground ambulance transport provided the shortest 911-hospital arrival interval at distances less than 10 miles from the hospital. At distances greater than 10 miles, simultaneously dispatched air transport was faster. Nonsimultaneous dispatched helicopter transport was faster than ground if greater than 45 miles from the hospital.

  15. Final assessment of vibro-acoustic source strength descriptors of helicopter gearboxes

    DEFF Research Database (Denmark)

    Ohlrich, Mogens; Rasmussen, Ulrik Møller

    1996-01-01

    Two novel measurement techniques have been developed for quantifying the vibro-aqcoustic source strength of lightweight helicopter gearboxes. The accuracy, robustness and implementation of these methods have been examined by a comprehensive investigation, including theoretical studies of simple...... multi-modal beam systems and extensive experiments with more realistic small scale models and with large, detailed 3/4-scale test structures of a medium-size helicopter. In addition, partial verification tests have been conducted with the Eurocopter BK 117 helicopter and its main rotor gearbox....... The results of this work are essential as input for any prediction code of the internal noise in a helicopter cabin, because the prediction requires knowledge of the major sources, that is, the rotors, engines and gearboxes....

  16. Is air transport of stroke patients faster than ground transport? A prospective controlled observational study.

    Science.gov (United States)

    Hesselfeldt, Rasmus; Gyllenborg, Jesper; Steinmetz, Jacob; Do, Hien Quoc; Hejselbæk, Julie; Rasmussen, Lars S

    2014-04-01

    Helicopters are widely used for interhospital transfers of stroke patients, but the benefit is sparsely documented. We hypothesised that helicopter transport would reduce system delay to thrombolytic treatment at the regional stroke centre. In this prospective controlled observational study, we included patients referred to a stroke centre if their ground transport time exceeded 30 min, or they were transported by a secondarily dispatched, physician-staffed helicopter. The primary endpoint was time from telephone contact to triaging neurologist to arrival in the stroke centre. Secondary endpoints included modified Rankin Scale at 3 months, 30-day and 1-year mortality. A total of 330 patients were included; 265 with ground transport and 65 with helicopter, of which 87 (33%) and 22 (34%), received thrombolysis, respectively (p=0.88). Time from contact to triaging neurologist to arrival in the regional stroke centre was significantly shorter in the ground group (55 (34-85) vs 68 (40-85) min, pground group (67 (42-136) km) than in the helicopter group (83 (46-143) km) (pground and helicopter transport. We found significantly shorter time from contact to triaging neurologist to arrival in the regional stroke centre if stroke patients were transported by primarily dispatched ground ambulance compared with a secondarily dispatched helicopter.

  17. Advanced Scout Helicopter (ASH) Fly-by-Wire Flight Control System Preliminary Design. Volume 1. System Design and Analysis

    Science.gov (United States)

    1981-03-01

    LI N N N ~L N N N N N ji J N t 0 0 - I - Li ACL Li LA. - LaN S z = N N N NIll * 0 0 0 0 0 0N 0 N N N LI LI LI LI - - N - ~Li, LAJO LaO LAO LaO LaON...type to permit back driving of motor sections that are shut down. A dual low-friction screw jack o1tall be used for the output. A brake with coils

  18. PID Daylight Control System

    Directory of Open Access Journals (Sweden)

    Horaţiu Ştefan Grif

    2011-06-01

    Full Text Available The paper describes the implementation and the tuning of a digital PID controller used in a daylight control application. Due to the fact that the process is unknown, an experimental method, Ziegler-Nichols, for the tuning of the PID controller was used. The obtained PID parameters do not offer a good behavior of the ALCS. To improve the performances of the ALCS, supplementary tuning of the PID parameters, via step response analysis, was made. The step response acquiring and analysis may have an expensive time cost. To avoid the time cost the present paper offers an algorithm which guide the designer to chose, in a slight manner, not only a set but a set family of the PID parameters for which the ALCS has a good behavior. Also, the algorithm presents the way how the ALCS user can set his desired ALCS speed reaction to the daylight variations.

  19. Ground Control System Description Document

    Energy Technology Data Exchange (ETDEWEB)

    Eric Loros

    2001-07-31

    The Ground Control System contributes to the safe construction and operation of the subsurface facility, including accesses and waste emplacement drifts, by maintaining the configuration and stability of the openings during construction, development, emplacement, and caretaker modes for the duration of preclosure repository life. The Ground Control System consists of ground support structures installed within the subsurface excavated openings, any reinforcement made to the rock surrounding the opening, and inverts if designed as an integral part of the system. The Ground Control System maintains stability for the range of geologic conditions expected at the repository and for all expected loading conditions, including in situ rock, construction, operation, thermal, and seismic loads. The system maintains the size and geometry of operating envelopes for all openings, including alcoves, accesses, and emplacement drifts. The system provides for the installation and operation of sensors and equipment for any required inspection and monitoring. In addition, the Ground Control System provides protection against rockfall for all subsurface personnel, equipment, and the engineered barrier system, including the waste package during the preclosure period. The Ground Control System uses materials that are sufficiently maintainable and that retain the necessary engineering properties for the anticipated conditions of the preclosure service life. These materials are also compatible with postclosure waste isolation performance requirements of the repository. The Ground Control System interfaces with the Subsurface Facility System for operating envelopes, drift orientation, and excavated opening dimensions, Emplacement Drift System for material compatibility, Monitored Geologic Repository Operations Monitoring and Control System for ground control instrument readings, Waste Emplacement/Retrieval System to support waste emplacement operations, and the Subsurface Excavation System

  20. Identification of Flap Motion Parameters for Vibration Reduction in Helicopter Rotors with Multiple Active Trailing Edge Flaps

    Directory of Open Access Journals (Sweden)

    Uğbreve;ur Dalli

    2011-01-01

    Full Text Available An active control method utilizing the multiple trailing edge flap configuration for rotorcraft vibration suppression and blade loads control is presented. A comprehensive model for rotor blade with active trailing edge flaps is used to calculate the vibration characteristics, natural frequencies and mode shapes of any complex composite helicopter rotor blade. A computer program is developed to calculate the system response, rotor blade root forces and moments under aerodynamic forcing conditions. Rotor blade system response is calculated using the proposed solution method and the developed program depending on any structural and aerodynamic properties of rotor blades, structural properties of trailing edge flaps and properties of trailing edge flap actuator inputs. Rotor blade loads are determined first on a nominal rotor blade without multiple active trailing edge flaps and then the effects of the active flap motions on the existing rotor blade loads are investigated. Multiple active trailing edge flaps are controlled by using open loop controllers to identify the effects of the actuator signal output properties such as frequency, amplitude and phase on the system response. Effects of using multiple trailing edge flaps on controlling rotor blade vibrations are investigated and some design criteria are determined for the design of trailing edge flap controller that will provide actuator signal outputs to minimize the rotor blade root loads. It is calculated that using the developed active trailing edge rotor blade model, helicopter rotor blade vibrations can be reduced up to 36% of the nominal rotor blade vibrations.

  1. Communicating Networked Control Systems

    Science.gov (United States)

    2007-03-31

    Bahamas, pages 1010-1015. 64. Carmen Del Vecchio and I.C. Paschalidis, “Supply Contracts with Service Level Requirements”, Proceedings of the IFAC...control using Monte Carlo sensing,” Proc. IEEE International Conference on Robotics and Automation, pp. 3058-3063, 2005. 10. S.B. Andersson, A.A. Handzel, V...Analysis, Madrid Spain. 20. S. Andersson and D. Hristu-Varsakelis, “Language-based feedback control using Monte -Carlo sensing”, to be subm. To IEEE Int’l

  2. Hybrid Systems: Computation and Control.

    Science.gov (United States)

    2007-11-02

    elbow) and a pinned first joint (shoul- der) (see Figure 2); it is termed an underactuated system since it is a mechanical system with fewer...Montreal, PQ, Canada, 1998. [10] M. W. Spong. Partial feedback linearization of underactuated mechanical systems . In Proceedings, IROS󈨢, pages 314-321...control mechanism and search for optimal combinations of control variables. Besides the nonlinear and hybrid nature of powertrain systems , hardware

  3. The CARMA Control System

    Science.gov (United States)

    Gwon, C.; Beard, A. D.; Daniel, P.; Hobbs, R.; Scott, S. L.; Kraybill, J. C.; Leitch, E.; Mehringer, D. M.; Plante, R.; Amarnath, N. S.; Pound, M. W.; Rauch, K. P.; Teuben, P. J.

    2004-07-01

    The Combined Array for Research in Millimeter-wave Astronomy (CARMA) will be the combination of the BIMA, OVRO, and SZA millimeter arrays. With first light scheduled for 2005, CARMA will be the first heterogeneous millimeter array, combining antennas varying from 3.5 m to 10.4 m in diameter. The controls for CARMA involve creating a uniform interface for all antennas. The antennas are grouped into five independently-controlled sub-arrays, which will be used for scientific observations, engineering, or maintenance. The sub-arrays are controlled by two components: the Sub-array Command Processor (SCP) and the Sub-array Tracker (SAT). While each sub-array has a dedicated SCP for handling command processing, a single SAT computes and distributes slowly varying parameters to the necessary sub-arrays. The sub-array interface uses CORBA distributed objects to physically separate the user interface from the array. This allows for stability in the core engine controlling the array while enabling flexibility in the user interface implementation.

  4. Electrochemically controlled supramolecular systems

    NARCIS (Netherlands)

    Nijhuis, Christian A.; Ravoo, Bart Jan; Huskens, Jurriaan; Reinhoudt, David N.

    2007-01-01

    Large and complex molecular structures can be assembled by supramolecular chemistry and self-organization. For practical purposes it is required that the assembly and disassembly of supramolecular complexes and materials can be directed and controlled by external stimuli in order to build, for insta

  5. Approximate controllability of distributed systems by distributed controllers

    Directory of Open Access Journals (Sweden)

    Benzion Shklyar

    2005-04-01

    Full Text Available Approximate controllability problem for a linear distributed control system with possibly unbounded input operator, connected in a series to another distributed system without control is investigated. An initial state of the second distributed system is considered as a control parameter. Applications to control partial equations governed by hyperbolic controller, and to control delay systems governed by hereditary controller are considered.

  6. A new approach to helicopter rotor blade research instrumentation

    Science.gov (United States)

    Knight, V. H., Jr.

    1978-01-01

    A rotor-blade-mounted telemetry instrumentation system developed and used in flight tests by the NASA/Langley Research Center is described. The system uses high-speed digital techniques to acquire research data from miniature pressure transducers on advanced rotor airfoils which are flight tested using an AH-1G helicopter. The system employs microelectronic PCM multiplexer-digitizer stations located remotely on the blade and in a hub-mounted metal canister. The electronics contained in the canister digitizes up to 16 sensors, formats this data with serial PCM data from the remote stations, and transmits the data from the canister which is above the plane of the rotor. Data is transmitted over an RF link to the ground for real-time monitoring and to the helicopter fuselage for tape recording.

  7. Arithmetically Controlled H Systems

    Directory of Open Access Journals (Sweden)

    V. Manca

    1998-06-01

    Full Text Available We consider two classes of restricted H systems, both dealing with numbers associated to the terms of splicing operations. In one of them, these numbers indicate the age of the strings (the generation when the strings are produced, in the second one the numbers can be interpreted as valences of the strings. Restricting the splicing to strings of "a similar age", or accepting as complete splicing processes only those processes which produce strings with a null valence increase the generative power of H systems (with finite sets of rules.

  8. Pneumatic boot for helicopter rotor deicing

    Science.gov (United States)

    Blaha, B. J.; Evanich, P. L.

    1981-01-01

    Pneumatic deicer boots for helicopter rotor blades were tested. The tests were conducted in the 6 by 9 ft icing research tunnel on a stationary section of a UH-IH helicopter main rotor blade. The boots were effective in removing ice and in reducing aerodynamic drag due to ice.

  9. Robust power system frequency control

    CERN Document Server

    Bevrani, Hassan

    2008-01-01

    Emphasizes the physical and engineering aspects of the power system frequency control design problem while providing a conceptual understanding of frequency regulation and application of robust control techniques. This book summarizes the author's research outcomes, contributions and experiences with power system frequency regulation.

  10. Optimal Control of Mechanical Systems

    Directory of Open Access Journals (Sweden)

    Vadim Azhmyakov

    2007-01-01

    Full Text Available In the present work, we consider a class of nonlinear optimal control problems, which can be called “optimal control problems in mechanics.” We deal with control systems whose dynamics can be described by a system of Euler-Lagrange or Hamilton equations. Using the variational structure of the solution of the corresponding boundary-value problems, we reduce the initial optimal control problem to an auxiliary problem of multiobjective programming. This technique makes it possible to apply some consistent numerical approximations of a multiobjective optimization problem to the initial optimal control problem. For solving the auxiliary problem, we propose an implementable numerical algorithm.

  11. Helicopter Noise And Noise Abatement Procedures

    Directory of Open Access Journals (Sweden)

    Borivoj Galović

    2004-03-01

    Full Text Available The helicopter generated noise at and around the airports islower than the noise generated by aeroplanes, since their numberof operations, i. e. the number of takeoffs and landings ismuch lower than the takeoffs and landings of the aeroplanes.Out of some hundred operations a day, helicopters participatewith approximately 15%, but the very impact of noise is by nomeans negligible, since the number of helicopter flights aboveurban areas is constantly increasing.This paper attempts to analyse this phenomenon and thetype of helicopter generated noise, its negative impacts, to explainthe flight procedures and the operative procedures duringtakeoff, landing and overflight of helicopters in operations inthe vicinity and outside airports, as well as the methods of measuringand determining the limit of noise [eve~ and the resultingproblems.

  12. Quadrotor helicopter for surface hydrological measurements

    Science.gov (United States)

    Pagano, C.; Tauro, F.; Porfiri, M.; Grimaldi, S.

    2013-12-01

    Surface hydrological measurements are typically performed through user-assisted and intrusive field methodologies which can be inadequate to monitor remote and extended areas. In this poster, we present the design and development of a quadrotor helicopter equipped with digital acquisition system and image calibration units for surface flow measurements. This custom-built aerial vehicle is engineered to be lightweight, low-cost, highly customizable, and stable to guarantee optimal image quality. Quadricopter stability guarantees minimal vibrations during image acquisition and, therefore, improved accuracy in flow velocity estimation through large scale particle image velocimetry algorithms or particle tracking procedures. Stability during the vehicle pitching and rolling is achieved by adopting large arm span and high-wing configurations. Further, the vehicle framework is composed of lightweight aluminum and durable carbon fiber for optimal resilience. The open source Ardupilot microcontroller is used for remote control of the quadricopter. The microcontroller includes an inertial measurement unit (IMU) equipped with accelerometers and gyroscopes for stable flight through feedback control. The vehicle is powered by a 3 cell (11.1V) 3000 mAh Lithium-polymer battery. Electronic equipment and wiring are hosted into the hollow arms and on several carbon fiber platforms in the waterproof fuselage. Four 35A high-torque motors are supported at the far end of each arm with 10 × 4.7 inch propellers. Energy dissipation during landing is accomplished by four pivoting legs that, through the use of shock absorbers, prevent the impact energy from affecting the frame thus causing significant damage. The data capturing system consists of a GoPro Hero3 camera and in-house built camera gimbal and shock absorber damping device. The camera gimbal, hosted below the vehicle fuselage, is engineered to maintain the orthogonality of the camera axis with respect to the water surface by

  13. Control principles of complex systems

    Science.gov (United States)

    Liu, Yang-Yu; Barabási, Albert-László

    2016-07-01

    A reflection of our ultimate understanding of a complex system is our ability to control its behavior. Typically, control has multiple prerequisites: it requires an accurate map of the network that governs the interactions between the system's components, a quantitative description of the dynamical laws that govern the temporal behavior of each component, and an ability to influence the state and temporal behavior of a selected subset of the components. With deep roots in dynamical systems and control theory, notions of control and controllability have taken a new life recently in the study of complex networks, inspiring several fundamental questions: What are the control principles of complex systems? How do networks organize themselves to balance control with functionality? To address these questions here recent advances on the controllability and the control of complex networks are reviewed, exploring the intricate interplay between the network topology and dynamical laws. The pertinent mathematical results are matched with empirical findings and applications. Uncovering the control principles of complex systems can help us explore and ultimately understand the fundamental laws that govern their behavior.

  14. Microprocessor control of photovoltaic systems

    Science.gov (United States)

    Millner, A. R.; Kaufman, D. L.

    1984-01-01

    The present low power CMOS microprocessor controller for photovoltaic power systems possesses three programs, which are respectively intended for (1) conventional battery-charging systems with state-of-charge estimation and sequential shedding of subarrays and loads, (2) maximum power-controlled battery-charging systems, and (3) variable speed dc motor drives. Attention is presently given to the development of this terrestrial equipment for spacecraft use.

  15. Uzaybimer Radio Telescope Control System

    Science.gov (United States)

    Balbay, R.; Öz, G. K.; Arslan, Ö.; Özeren, F. F.; Küçük, İ.

    2016-12-01

    A 13 meters former NATO radar is being converted into a radio telescope. The radio telescope is controlled by a system which has been developed at UZAYBİMER. The Telescope Control System(TCS) has been designed using modern industrial systems. TCS has been developed in LabView platform in which works Windows embedded OS. The position feedback used on radio telescopes is an industrial EtherCAT standard. ASCOM library is used for astronomical calculations.

  16. Aircraft control system

    Science.gov (United States)

    Lisoski, Derek L. (Inventor); Kendall, Greg T. (Inventor)

    2007-01-01

    A solar rechargeable, long-duration, span-loaded flying wing, having no fuselage or rudder. Having a two-hundred foot wingspan that mounts photovoltaic cells on most all of the wing's top surface, the aircraft uses only differential thrust of its eight propellers to turn, pitch and yaw. The wing is configured to deform under flight loads to position the propellers such that the control can be achieved. Each of five segments of the wing has one or more motors and photovoltaic arrays, and produces its own lift independent of the other segments, to avoid loading them. Five two-sided photovoltaic arrays, in all, are mounted on the wing, and receive photovoltaic energy both incident on top of the wing, and which is incident also from below, through a bottom, transparent surface.

  17. Heli/SITAN: A Terrain Referenced Navigation algorithm for helicopters

    Energy Technology Data Exchange (ETDEWEB)

    Hollowell, J.

    1990-01-01

    Heli/SITAN is a Terrain Referenced Navigation (TRN) algorithm that utilizes radar altimeter ground clearance measurements in combination with a conventional navigation system and a stored digital terrain elevation map to accurately estimate a helicopter's position. Multiple Model Adaptive Estimation (MMAE) techniques are employed using a bank of single state Kalman filters to ensure that reliable position estimates are obtained even in the face of large initial position errors. A real-time implementation of the algorithm was tested aboard a US Army UH-1 helicopter equipped with a Singer-Kearfott Doppler Velocity Sensor (DVS) and a Litton LR-80 strapdown Attitude and Heading Reference System (AHRS). The median radial error of the position fixes provided in real-time by this implementation was less than 50 m for a variety of mission profiles. 6 refs., 7 figs.

  18. Distributed Stepping Motor Control System

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The beam diagnostic devices used at RIBLL are driven by stepper motors, which are controlled by I/O modules based on ISA-bus in an industrial computer. The disadvantages of such mode are that a large number of long cables are used and one computer to control is unsafe. We have developed a distributed stepping motor control system for the remote, local and centralized control of the stepping motors. RS-485 bus is used for the connection between the remote control unit and the local control units. The con...

  19. Emission control system

    Science.gov (United States)

    Parrish, Clyde F. (Inventor); Chung, J. Landy (Inventor)

    2009-01-01

    Methods and apparatus utilizing hydrogen peroxide are useful to reduce SOx and mercury (or other heavy metal) emissions from combustion flue gas streams. The methods and apparatus may further be modified to reduce NOx emissions. Continuous concentration of hydrogen peroxide to levels approaching or exceeding propellant-grade hydrogen peroxide facilitates increased system efficiency. In this manner, combustion flue gas streams can be treated for the removal of SOx and heavy metals, while isolating useful by-products streams of sulfuric acid as well as solids for the recovery of the heavy metals. Where removal of NOx emissions is included, nitric acid may also be isolated for use in fertilizer or other industrial applications.

  20. Control of Solar Energy Systems

    CERN Document Server

    Camacho, Eduardo F; Rubio, Francisco R; Martínez, Diego

    2012-01-01

    Control of Solar Energy Systems details the main solar energy systems, problems involved with their control, and how control systems can help in increasing their efficiency.  After a brief introduction to the fundamental concepts associated with the use of solar energy in both photovoltaic and thermal plants, specific issues related to control of solar systems are embarked upon. Thermal energy systems are then explored in depth, as well as  other solar energy applications such as solar furnaces and solar refrigeration systems. Problems of variable generation profile and of the contribution of many solar plants to the same grid system are considered with the necessary integrated and supervisory control solutions being discussed. The text includes material on: ·         A comparison of basic and advanced control methods for parabolic troughs from PID to nonlinear model-based control; ·         solar towers and solar tracking; ·         heliostat calibration, characterization and off...

  1. Control Evaluation Information System Savings

    Directory of Open Access Journals (Sweden)

    Eddy Sutedjo

    2011-05-01

    Full Text Available The purpose of this research is to evaluate the control of information system savings in the banking and to identify the weaknesses and problem happened in those saving systems. Research method used are book studies by collecting data and information needed and field studies by interview, observation, questioner, and checklist using COBIT method as a standard to assess the information system control of the company. The expected result about the evaluation result that show in the problem happened and recommendation given as the evaluation report and to give a view about the control done by the company. Conclusion took from this research that this banking company has met standards although some weaknesses still exists in the system.Index Terms - Control Information System, Savings

  2. Detection of Forward Flight Limitations of Unmanned Helicopters

    OpenAIRE

    Voigt, Andreas; Dauer, Johann; Krenik, Alex; Dittrich, Jörg Steffen

    2016-01-01

    In this paper, a method is proposed to determine the flight envelope limitations for steady forward flight with the purpose of performing a flight envelope expansion. First, the rotary wing system is analyzed. In this paper, an intermeshing rotor configuration, a SwissDrones Dragon 50, is used to demonstrate the approach. Next, relevant limitations of the forward flight are reviewed and analyzed with the help of the Helicopter Overall Simulation Tool (HOST). From this analysis, relevant measu...

  3. [Causes of fatigue in civil aviation helicopter crews].

    Science.gov (United States)

    Kamenskiĭ, Iu N

    1981-01-01

    Vibration and noise play an important part in fatiguing crewmembers of helicopters. The exposure to these factors during the flying shift results in an early and marked fatigue of pilots the level of which depends on the vibration effects to a larger extent than on the noise effects. The fatigue is followed by a decline of the psychophysiological parameters characterizing the visual and motor functions as well as the ratio of the basic processes in the central nervous system.

  4. Acuity systems and control charting.

    Science.gov (United States)

    Shaha, S H

    1995-01-01

    The strengths of control charting and other statistical process control (SPC) tools have not previously been applied to acuity systems. Intermountain Health Care, Salt Lake City, Utah, developed a new acuity system that relies heavily upon control charting for an array of purposes, including immediate feedback to caregivers regarding decisions, ongoing feedback to managers regarding decision patterns, and longer-term feedback regarding trends and budget-relevant information. The use of control charts has eliminated the need for auditing acuity-based staffing and has maintained the reliability of classifications at levels above 95 percent. Implications for other novel applications are offered.

  5. Commutated automatic gain control system

    Science.gov (United States)

    Yost, S. R.

    1982-01-01

    The commutated automatic gain control (AGC) system was designed and built for the prototype Loran-C receiver is discussed. The current version of the prototype receiver, the Mini L-80, was tested initially in 1980. The receiver uses a super jolt microcomputer to control a memory aided phase loop (MAPLL). The microcomputer also controls the input/output, latitude/longitude conversion, and the recently added AGC system. The AGC control adjusts the level of each station signal, such that the early portion of each envelope rise is about at the same amplitude in the receiver envelope detector.

  6. Traction Control System for Motorcycles

    Directory of Open Access Journals (Sweden)

    Cardinale Pascal

    2009-01-01

    Full Text Available Traction control is a widely used control system to increase stability and safety of four wheel vehicles. Automatic stability control is used in the BMW K1200R motorcycle and in motoGP competition, but not in other motorcycles. This paper presents an algorithm and a low-cost real-time hardware implementation for motorcycles. A prototype has been developed, applied on a commercial motorcycle, and tested in a real track. The control system that can be tuned by the driver during the race has been appreciated by the test driver.

  7. Traction Control System for Motorcycles

    Directory of Open Access Journals (Sweden)

    Massimo Conti

    2009-01-01

    Full Text Available Traction control is a widely used control system to increase stability and safety of four wheel vehicles. Automatic stability control is used in the BMW K1200R motorcycle and in motoGP competition, but not in other motorcycles. This paper presents an algorithm and a low-cost real-time hardware implementation for motorcycles. A prototype has been developed, applied on a commercial motorcycle, and tested in a real track. The control system that can be tuned by the driver during the race has been appreciated by the test driver.

  8. A universal heliostat control system

    Science.gov (United States)

    Gross, Fabian; Geiger, Mark; Buck, Reiner

    2017-06-01

    This paper describes the development of a universal heliostat control system as part of the AutoR project [1]. The system can control multiple receivers and heliostat types in a single application. The system offers support for multiple operators on different machines and is designed to be as adaptive as possible. Thus, the system can be used for different heliostat field setups with only minor adaptations of the system's source code. This is achieved by extensive usage of modern programming techniques like reflection and dependency injection. Furthermore, the system features co-simulation of a ray tracer, a reference PID-controller implementation for open volumetric receivers and methods for heliostat calibration and monitoring.

  9. Linux in Industrial Control Systems

    CERN Document Server

    Riesco, T

    2001-01-01

    Today the Linux operating system has become a real alternative for industrial control systems. Linux supports all layers in control systems starting with Real-Time or embedded systems for data acquisition, following with treatment, storage, communication and data adaptation, and finally, with supervision and user interfaces. In the last years the Linux development has grown being incorporated in several industrial systems demonstrating high performance, availability and stability for complex processes in chemical, automobile or petrol industries. In many of these industries Linux architectures have been tested and validated successfully. The new CERN policy supporting Linux, as well as the emergence of cheap and robust Linux solutions, motivates its implementation in our safety control and supervision systems in the near future.

  10. MULTIPLE ECH LAUNCHER CONTROL SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    GREEN,M.T; PONCE,D; GRUNLOH,H.J; ELLIS,R.A; GROSNICKLE,W.H; HUMPHREY,R.L

    2003-10-01

    OAK-B135 The addition of new, high power gyrotrons to the heating and current drive arsenal at DIII-D, required a system upgrade for control of fully steerable ECH Launchers. Each launcher contains two pointing mirrors with two degrees of mechanical freedom. The two flavors of motion are called facet and tilt. Therefore up to four channels of motion per launcher need to be controlled. The system utilizes absolute encoders to indicate mirror position and therefore direction of the microwave beam. The launcher movement is primarily controlled by PLC, but future iterations of design, may require this control to be accomplished by a CPU on fast bus such as Compact PCI. This will be necessary to accomplish real time position control. Safety of equipment and personnel is of primary importance when controlling a system of moving parts. Therefore multiple interlocks and fault status enunciators have been implemented. This paper addresses the design of a Multiple ECH Launcher Control System, and characterizes the flexibility needed to upgrade to a real time position control system in the future.

  11. Comparison of adaptive algorithms for the control of tonal disturbances in mechanical systems

    Science.gov (United States)

    Zilletti, M.; Elliott, S. J.; Cheer, J.

    2016-09-01

    This paper presents a study on the performance of adaptive control algorithms designed to reduce the vibration of mechanical systems excited by a harmonic disturbance. The mechanical system consists of a mass suspended on a spring and a damper. The system is equipped with a force actuator in parallel with the suspension. The control signal driving the actuator is generated by adjusting the amplitude and phase of a sinusoidal reference signal at the same frequency as the excitation. An adaptive feedforward control algorithm is used to adapt the amplitude and phase of the control signal, to minimise the mean square velocity of the mass. Two adaptation strategies are considered in which the control signal is either updated after each period of the oscillation or at every time sample. The first strategy is traditionally used in vibration control in helicopters for example; the second strategy is normally referred to as the filtered-x least mean square algorithm and is often used to control engine noise in cars. The two adaptation strategies are compared through a parametric study, which investigates the influence of the properties of both the mechanical system and the control system on the convergence speed of the two algorithms.

  12. 基于DSP的直升机轴承振动信号检测系统设计%Helicopter Bearing Vibration Signal Detection System Based on DSP Processor

    Institute of Scientific and Technical Information of China (English)

    黄信杰; 俞子荣; 陈琼; 陈黎娟; 吴开志

    2016-01-01

    This paper mainly describes the design of a helicopter bearing vibration signal detection system based on TMS320F28335,and gives the realization principle,hardware structure and software design of the system.PCI bus communi-cation mode is adopted as the communication scheme of the system,and the parameters of the detection system can be easily realized by the upper computer software of the system.%主要叙述以TMS320F28335为核心的直升机轴承振动信号检测系统的设计,给出了系统的实现原理、硬件组成及相应的软件设计。采用PCI总线通信方式作为搭建系统的通信方案,利用该系统的上位机软件可方便地实现对检测系统的参数设置。该系统运用在直升机轴承故障诊断中,可以实时显示参数和图形化显示振动信号。

  13. Comparison of automatic control systems

    Science.gov (United States)

    Oppelt, W

    1941-01-01

    This report deals with a reciprocal comparison of an automatic pressure control, an automatic rpm control, an automatic temperature control, and an automatic directional control. It shows the difference between the "faultproof" regulator and the actual regulator which is subject to faults, and develops this difference as far as possible in a parallel manner with regard to the control systems under consideration. Such as analysis affords, particularly in its extension to the faults of the actual regulator, a deep insight into the mechanism of the regulator process.

  14. A feasibility study regarding the addition of a fifth control to a rotorcraft in-flight simulator

    Science.gov (United States)

    Turner, Simon; Andrisani, Dominick, II

    1992-01-01

    The addition of a large movable horizontal tail surface to the control system of a rotorcraft in-flight simulator being developed from a Sikorsky UH-60A Black Hawk Helicopter is evaluated. The capabilities of the control surface as a trim control and as an active control are explored. The helicopter dynamics are modeled using the Generic Helicopter simulation program developed by Sikorsky Aircraft. The effect of the horizontal tail on the helicopter trim envelope is examined by plotting trim maps of the aircraft attitude and controls as a function of the flight speed and horizontal tail incidence. The control power of the tail surface relative to that of the other controls is examined by comparing control derivatives extracted from the simulation program over the flight speed envelope. The horizontal tail's contribution as an active control is evaluated using an explicit model following control synthesis involving a linear model of the helicopter in steady, level flight at a flight speed of eighty knots. The horizontal tail is found to provide additional control flexibility in the longitudinal axis. As a trim control, it provides effective control of the trim pitch attitude at mid to high forward speeds. As an active control, the horizontal tail provides useful pitching moment generating capabilities at mid to high forward speeds.

  15. VA National Bed Control System

    Data.gov (United States)

    Department of Veterans Affairs — The VA National Bed Control System records the levels of operating, unavailable and authorized beds at each VAMC, and it tracks requests for changes in these levels....

  16. 旋翼结冰对直升机飞行动力学特性的影响%Effect of Rotor Icing on Helicopter Flight Dynamic Characteristics

    Institute of Scientific and Technical Information of China (English)

    李国知; 曹义华

    2011-01-01

    基于旋翼冰风洞试验数据,考虑桨叶表面附着冰脱落及桨叶表面局部温度对结冰的影响,提出了旋翼结冰的工程模型,建立了直升机旋翼结冰后的飞行动力学模型,以UH-60A为样机,研究了直升机旋翼结冰后的平衡特性,分析了结冰对直升机稳定性的影响.根据有人驾驶垂直/短距起落飞机军用品质规范(MIL-F-83300)与军用旋翼飞行器驾驶品质要求(ADS-33E-PRF),分析了结冰时间、环境温度、液态水含量以及平均水滴直径对旋翼结冰后的直升机开环状态下的操纵特性、姿态敏捷性、轴间耦合特性以及垂直轴操纵功效的影响.计算结果的对比分析显示,旋翼结冰模型合理,直升机飞行动力学模型计算精度高,能够用来研究直升机旋翼结冰后的飞行动力学问题.%Based on the rotor icing tunnel data, and considering the effect of rotor blade ice shedding and local temperature variation on the rotor blade icing, an engineering rotor icing model is advanced. Then a flight dynamics modal is built of a single rotor helicopter due to icing. The trim characteristics and stability of a UH-60A helicopter in icing conditions at the hover and in the forward flight are studied in detail. Using the military specification flying qualities of piloted V/STOL aircraft (MIL-F-83300) and the handling qualities requirements for military helicopters (ADS-33E-PRF), the effect of icing on the controllability, attitude quickness, interaxis coupling, and vertical axis control power of the helicopter open-loop system are analyzed in terms of icing time, atmospheric temperature, liquid water content, and median volumetric diameter. Calculation results indicate that the rotor icing model and the iced helicopter dynamics model are feasible and effective, and that they can be used to investigate issues in helicopter dynamics in rotor icing conditions.

  17. Lift capability prediction for helicopter rotor blade-numerical evaluation

    Science.gov (United States)

    Rotaru, Constantin; Cîrciu, Ionicǎ; Luculescu, Doru

    2016-06-01

    The main objective of this paper is to describe the key physical features for modelling the unsteady aerodynamic effects found on helicopter rotor blade operating under nominally attached flow conditions away from stall. The unsteady effects were considered as phase differences between the forcing function and the aerodynamic response, being functions of the reduced frequency, the Mach number and the mode forcing. For a helicopter rotor, the reduced frequency at any blade element can't be exactly calculated but a first order approximation for the reduced frequency gives useful information about the degree of unsteadiness. The sources of unsteady effects were decomposed into perturbations to the local angle of attack and velocity field. The numerical calculus and graphics were made in FLUENT and MAPLE soft environments. This mathematical model is applicable for aerodynamic design of wind turbine rotor blades, hybrid energy systems optimization and aeroelastic analysis.

  18. Feasibility study of a superconducting motor for electrical helicopter propulsion

    Science.gov (United States)

    Simons, C. A. B. A. E.; Sanabria-Walter, C.; Polinder, H.

    2014-05-01

    During the past decades, superconducting electrical machines have become more suitable to replace conventional iron based designs, because of their lower weight and higher torque density. These properties make them good candidates for use in More Electric Aircraft (MEA). Especially helicopter propulsion systems could benefit from the increased performance. This paper describes the feasibility study of a superconducting motor to be used for helicopter propulsion as part of a More Electric Aircraft (MEA). For this, the armature, field windings and cryostat are designed, aiming at meeting the difficult specifications. Since superconductors have virtually no electrical resistance when cooled down below a certain critical temperature, they can be used to build high field and low weight coils for electrical machines. Especially the possibility to not use iron can make the superconducting motor lighter with a higher power density compared with conventional Permanent Magnet (PM) motors.

  19. Synthesis of pneumatic controll systems

    Directory of Open Access Journals (Sweden)

    D. Nowak

    2011-04-01

    Full Text Available Currently, the basic tool for automating the production processes are the PLCs. However, in many areas application of the pneumaticcontrol systems may be more reasonable. The main factor determining choice of the control technology are costs. In the case of pneumaticsystems, the costs shall be determined by the number of elements used. Therefore, during the design works it is important to choose anappropriate method for the pneumatic control systems synthesis. The article presents the MTS method, which may be used for a discretetechnological processes modeling and PLC programming, as well as for a pneumatic control systems designing. An important element ofthe MTS method is the network of actions, which graphically presents an algorithm of the implemented process. Based on the actionnetwork and operating machine’s functional diagram, the diagram of different states is determinated, which graphically shows changes ofthe control system’s input and output signals. Analysis of the diagram of different states, makes it easy to determine a schematic equation, which shall be the basis for the control system implementation. Advantage of the MTS method is the lack of restrictions on the number of the control system’s input and output signals. The resulting solution is characterized by a minimum number of elements needed to implement the control system.

  20. Contamination Control: a systems approach

    NARCIS (Netherlands)

    Donck, J.C.J. van der

    2010-01-01

    Contamination influences a wide variety of industrial processes. For complex systems, contamination control, the collective effort to control contamination to such a level that it guarantees or even improves process or product functionality, offers a way for finding workable solutions. Central in

  1. Contamination Control: a systems approach

    NARCIS (Netherlands)

    Donck, J.C.J. van der

    2010-01-01

    Contamination influences a wide variety of industrial processes. For complex systems, contamination control, the collective effort to control contamination to such a level that it guarantees or even improves process or product functionality, offers a way for finding workable solutions. Central in th

  2. Contamination Control: a systems approach

    NARCIS (Netherlands)

    Donck, J.C.J. van der

    2010-01-01

    Contamination influences a wide variety of industrial processes. For complex systems, contamination control, the collective effort to control contamination to such a level that it guarantees or even improves process or product functionality, offers a way for finding workable solutions. Central in th

  3. Robust power system frequency control

    CERN Document Server

    Bevrani, Hassan

    2014-01-01

    This updated edition of the industry standard reference on power system frequency control provides practical, systematic and flexible algorithms for regulating load frequency, offering new solutions to the technical challenges introduced by the escalating role of distributed generation and renewable energy sources in smart electric grids. The author emphasizes the physical constraints and practical engineering issues related to frequency in a deregulated environment, while fostering a conceptual understanding of frequency regulation and robust control techniques. The resulting control strategi

  4. Pump control system for windmills

    Science.gov (United States)

    Avery, Don E.

    1983-01-01

    A windmill control system having lever means, for varying length of stroke of the pump piston, and a control means, responsive to the velocity of the wind to operate the lever means to vary the length of stroke and hence the effective displacement of the pump in accordance with available wind energy, with the control means having a sensing member separate from the windmill disposed in the wind and displaceable thereby in accordance with wind velocity.

  5. A novel microsatellite control system

    Energy Technology Data Exchange (ETDEWEB)

    Moore, K.R.; Frigo, J.R.; Tilden, M.W.

    1998-02-01

    The authors are researching extremely simple yet quite capable analog pulse-coded neural networks for ``smaller-faster-cheaper`` spacecraft attitude and control systems. The will demonstrate a prototype microsatellite that uses their novel control method to autonomously stabilize itself in the ambient magnetic field and point itself at the brightest available light source. Though still in design infancy, the ``Nervous Net`` controllers described could allow for space missions not currently possible given conventional satellite hardware. Result, prospects and details are presented.

  6. The ATLAS Detector Control System

    CERN Document Server

    Schlenker, S; Kersten, S; Hirschbuehl, D; Braun, H; Poblaguev, A; Oliveira Damazio, D; Talyshev, A; Zimmermann, S; Franz, S; Gutzwiller, O; Hartert, J; Mindur, B; Tsarouchas, CA; Caforio, D; Sbarra, C; Olszowska, J; Hajduk, Z; Banas, E; Wynne, B; Robichaud-Veronneau, A; Nemecek, S; Thompson, PD; Mandic, I; Deliyergiyev, M; Polini, A; Kovalenko, S; Khomutnikov, V; Filimonov, V; Bindi, M; Stanecka, E; Martin, T; Lantzsch, K; Hoffmann, D; Huber, J; Mountricha, E; Santos, HF; Ribeiro, G; Barillari, T; Habring, J; Arabidze, G; Boterenbrood, H; Hart, R; Marques Vinagre, F; Lafarguette, P; Tartarelli, GF; Nagai, K; D'Auria, S; Chekulaev, S; Phillips, P; Ertel, E; Brenner, R; Leontsinis, S; Mitrevski, J; Grassi, V; Karakostas, K; Iakovidis, G.; Marchese, F; Aielli, G

    2011-01-01

    The ATLAS experiment is one of the multi-purpose experiments at the Large Hadron Collider (LHC), constructed to study elementary particle interactions in collisions of high-energy proton beams. Twelve different sub-detectors as well as the common experimental infrastructure are supervised by the Detector Control System (DCS). The DCS enables equipment supervision of all ATLAS sub-detectors by using a system of >130 server machines running the industrial SCADA product PVSS. This highly distributed system reads, processes and archives of the order of 106 operational parameters. Higher level control system layers allow for automatic control procedures, efficient error recognition and handling, and manage the communication with external systems such as the LHC. This contribution firstly describes the status of the ATLAS DCS and the experience gained during the LHC commissioning and the first physics data taking operation period. Secondly, the future evolution and maintenance constraints for the coming years an...

  7. IMPULSE CONTROL HYBRID ELECTRICAL SYSTEM

    Directory of Open Access Journals (Sweden)

    A. A. Lobaty

    2016-01-01

    Full Text Available This paper extends the recently introduced approach for modeling and solving the optimal control problem of fixedswitched mode DC-DC power converter. DCDC converters are a class of electric power circuits that used extensively in regulated DC power supplies, DC motor drives of different types, in Photovoltaic Station energy conversion and other applications due to its advantageous features in terms of size, weight and reliable performance. The main problem in controlling this type converters is in their hybrid nature as the switched circuit topology entails different modes of operation, each of it with its own associated linear continuous-time dynamics.This paper analyses the modeling and controller synthesis of the fixed-frequency buck DC-DC converter, in which the transistor switch is operated by a pulse sequence with constant frequency. In this case the regulation of the DC component of the output voltage is via the duty cycle. The optimization of the control system is based on the formation of the control signal at the output.It is proposed to solve the problem of optimal control of a hybrid system based on the formation of the control signal at the output of the controller, which minimizes a given functional integral quality, which is regarded as a linear quadratic Letov-Kalman functional. Search method of optimal control depends on the type of mathematical model of control object. In this case, we consider a linear deterministic model of the control system, which is common for the majority of hybrid electrical systems. For this formulation of the optimal control problem of search is a problem of analytical design of optimal controller, which has the analytical solution.As an example of the hybrid system is considered a step-down switching DC-DC converter, which is widely used in various electrical systems: as an uninterruptible power supply, battery charger for electric vehicles, the inverter in solar photovoltaic power plants.. A

  8. Helicopter Icing Review.

    Science.gov (United States)

    1980-09-01

    c CD 4- Z~L ~ ~L)~ u)z ~ ~ -4 z 4~ - -Ia. LnCD 9- CD C. Ln -i L.. L. c0 000 - -4 0000 0 0 o 00 CL -4- CD CDC CDUz 9- V) ) -cc C oL CD r 0LiDr- uDI L...protection system involved. o Icing conditions frequently occur in very moist air masses blowing inland from warmer seas, such as the Gulf of Mexico , the

  9. Principal Components Analysis of Triaxial Vibration Data From Helicopter Transmissions

    Science.gov (United States)

    Tumer, Irem Y.; Huff, Edward M.

    2001-01-01

    Research on the nature of the vibration data collected from helicopter transmissions during flight experiments has led to several crucial observations believed to be responsible for the high rates of false alarms and missed detections in aircraft vibration monitoring systems. This work focuses on one such finding, namely, the need to consider additional sources of information about system vibrations. In this light, helicopter transmission vibration data, collected using triaxial accelerometers, were explored in three different directions, analyzed for content, and then combined using Principal Components Analysis (PCA) to analyze changes in directionality. In this paper, the PCA transformation is applied to 176 test conditions/data sets collected from an OH58C helicopter to derive the overall experiment-wide covariance matrix and its principal eigenvectors. The experiment-wide eigenvectors. are then projected onto the individual test conditions to evaluate changes and similarities in their directionality based on the various experimental factors. The paper will present the foundations of the proposed approach, addressing the question of whether experiment-wide eigenvectors accurately model the vibration modes in individual test conditions. The results will further determine the value of using directionality and triaxial accelerometers for vibration monitoring and anomaly detection.

  10. Computer Modelling of a Tank Battle with Helicopter Support

    Directory of Open Access Journals (Sweden)

    Chatter Singh

    1986-01-01

    Full Text Available The paper attempts to model a tank versus tank battle scenario in which the defender is provided an armed helicopter unit support, against surprise advance of the attacker towards an important place. The stochastic and dynamic nature of the battle system has been handled by means of Monte Carlo simulation. In that activities like move, search, fire, hit and kill are simulated and their effects generated in the model. The game has been repeated for parameters relating to (i fire power (ii mobility (iii intervisibility (iv blind shooting (v defender/attacker force ratio and (vi helicopter unit support with the defender. Then, average numerical effects in each case have been analysed.Although the results are based on tentative data, the. trend seems to suggest that a battalion of Centurion tanks or 2 coys with a helicopter unit support stand fairly good chance to defeat the attack by M-47/48 tanks equivalent to 4 coys. Neyertheless, the methodology provides an effective basis to systematically approach realistic situations and quantitatively assess weapon systems effectiveness under tactical alternatives and battle field environments.

  11. Helicopter vibration and risk of reversible myopia among military air crews

    Directory of Open Access Journals (Sweden)

    Bastaman Basuki

    2002-06-01

    Full Text Available We assessed to what extend the risk of reversible myopia of the different degree of helicopter vibrations and other risk factors among military helicopter pilots and flight engineers. The study was a nested case-control design using medical record at the Institute of Aerospace Medicine of the Indonesian Air Force and Medical Directorate of the Indonesian Army (Flying Wing. Cases and controls were military helicopter pilots and flight engineers who had ametropic visual acuity at the time of entry into military service from 1972 until 1992. Reversible myopia means visual acuity corrected of - 0.50 dioptri or less. The final model indicates there was a relationship between vibration level, duration of work and risk of reversible myopia. Helicopter crews exposed to high vibration level had 4.5 times to develop reversible myopia [adjusted odds ratio (OR = 4.47; 95% confidence intervals (CI = 1.48 - 13.55] relative to those who exposed to weak vibration level. There was noted a healthy worker's survivor effect. Those who remain work for a longer peiod had less a chance to be myopia. Those who worked for 10 years or more had a lowered risk of 85% to be myopia compared with those who worked for 14 years (adjusted OR = 0.15; 95% CI = 0.03 - 0.87. Helicopter crews exposed to high helicopter vibration had 4.5 times to develop reversible myopia, and a higher risk occurred during the first four years of employment. (Med J Indones 2002; 11: 93-6Keywords: helicopter vibration, reversible myopia, air crews

  12. Neural-network-based navigation and control of unmanned aerial vehicles for detecting unintended emissions

    Science.gov (United States)

    Zargarzadeh, H.; Nodland, David; Thotla, V.; Jagannathan, S.; Agarwal, S.

    2012-06-01

    Unmanned Aerial Vehicles (UAVs) are versatile aircraft with many applications, including the potential for use to detect unintended electromagnetic emissions from electronic devices. A particular area of recent interest has been helicopter unmanned aerial vehicles. Because of the nature of these helicopters' dynamics, high-performance controller design for them presents a challenge. This paper introduces an optimal controller design via output feedback control for trajectory tracking of a helicopter UAV using a neural network (NN). The output-feedback control system utilizes the backstepping methodology, employing kinematic, virtual, and dynamic controllers and an observer. Optimal tracking is accomplished with a single NN utilized for cost function approximation. The controller positions the helicopter, which is equipped with an antenna, such that the antenna can detect unintended emissions. The overall closed-loop system stability with the proposed controller is demonstrated by using Lyapunov analysis. Finally, results are provided to demonstrate the effectiveness of the proposed control design for positioning the helicopter for unintended emissions detection.

  13. Flight crew fatigue III: North Sea helicopter air transport operations.

    Science.gov (United States)

    Gander, P H; Barnes, R M; Gregory, K B; Graeber, R C; Connell, L J; Rosekind, M R

    1998-09-01

    We studied 32 helicopter pilots before, during, and after 4-5 d trips from Aberdeen, Scotland, to service North Sea oil rigs. On duty days, subjects awoke 1.5 h earlier than pretrip or posttrip, after having slept nearly an hour less. Subjective fatigue was greater posttrip than pretrip. By the end of trip days, fatigue was greater and mood more negative than by the end of pretrip days. During trips, daily caffeine consumption increased 42%, reports of headache doubled, reports of back pain increased 12-fold, and reports of burning eyes quadrupled. In the cockpits studied, thermal discomfort and high vibration levels were common. Subjective workload during preflight, taxi, climb, and cruise was related to the crewmembers' ratings of the quality of the aircraft systems. During descent and approach, workload was affected by weather at the landing site. During landing, it was influenced by the quality of the landing site and air traffic control. Beginning duty later, and greater attention to aircraft comfort and maintenance, should reduce fatigue in these operations.

  14. Combat Rescue Helicopter (CRH)

    Science.gov (United States)

    2015-12-01

    capable of main base and austere location operations for worldwide PR missions. CRH system activities may be required during any phase of a service/joint...between planned Sikorsky labor and utilization of design center offload personnel. In some cases, less design hours were required. The unfavorable net...0.0 Labor Rate 0.0 Energy Rate 0.0 Technical Input 0.0 Other 0.0 Total Changes 0.0 Current Estimate 24529.5 CRH December 2015 SAR March 17, 2016 15

  15. Dressage, Control, and Enterprise Systems

    DEFF Research Database (Denmark)

    Gal, Uri; Berente, Nicholas; Yoo, Youngjin

    2010-01-01

    In 2004, National Aeronautics and Space Administration (NASA) implemented Full Cost, an activity-based accounting program through an agency-wide enterprise resource planning (ERP) implementation. We apply Foucault's notion of 'dressage' to highlight aspects of demonstrative control associated...... with this implementation effort and to outline the different dimensions along which control was distributed. We suggest that some elements of Full Cost and the ERP system were geared toward satisfying disciplinary requirements without necessarily contributing to productive activity. We term these elements dressage...... that the ideal of complete enterprise control remains unattainable, as aspects of demonstrative control are inevitably implicated within broader enterprise-wide control systems within contemporary organizations. We conclude with implications for research and practice....

  16. Balanced bridge feedback control system

    Science.gov (United States)

    Lurie, Boris J. (Inventor)

    1990-01-01

    In a system having a driver, a motor, and a mechanical plant, a multiloop feedback control apparatus for controlling the movement and/or positioning of a mechanical plant, the control apparatus has a first local bridge feedback loop for feeding back a signal representative of a selected ratio of voltage and current at the output driver, and a second bridge feedback loop for feeding back a signal representative of a selected ratio of force and velocity at the output of the motor. The control apparatus may further include an outer loop for feeding back a signal representing the angular velocity and/or position of the mechanical plant.

  17. The AFP Detector Control System

    CERN Document Server

    Oleiro Seabra, Luis Filipe; The ATLAS collaboration

    2017-01-01

    The ATLAS Forward Proton (AFP) detector is one of the forward detectors of the ATLAS experiment at CERN aiming at measuring momenta and angles of diffractively scattered protons. Silicon Tracking and Time-of-Flight detectors are located inside Roman Pot stations inserted into beam pipe aperture. The AFP detector is composed of two stations on each side of the ATLAS interaction point and is under commissioning. The detector is provided with high and low voltage distribution systems. Each station has vacuum and cooling systems, movement control and all the required electronics for signal processing. Monitoring of environmental parameters, like temperature and radiation, is also available. The Detector Control System (DCS) provides control and monitoring of the detector hardware and ensures the safe and reliable operation of the detector, assuring good data quality. Comparing with DCS systems of other detectors, the AFP DCS main challenge is to cope with the large variety of AFP equipment. This paper describes t...

  18. Distributed control system for vehicles

    Science.gov (United States)

    Callen, Jeffrey N.; Iaconis, John M.

    1997-01-01

    Previously, control systems for remotely controlled vehicles (RCVs) and unmanned ground vehicles (UGVs) have largely been of a centralized design, in which all vehicles sensing and servo control systems are individually interfaces to a central computer. These controllers often have been completely redeveloped for each new application. This approach leads to increased development, installation, and maintenance costs, and to a product that is not easily adaptable to other platforms or tasks. Under a Phase II SBIR program, RedZone Robotics is developing a distributed control systems (DCS) that reduces development, installation, and maintenance costs while enhancing adaptability to other platforms or applications. The DCS consists of a distributed control network of small, intelligent local controller nodes acting on the vehicle motion and sensing system components. A central card oversees the network and handles higher level commands. The central card and local nodes are linked through the controller area network serial bus. The node hardware is of standardized design so that application specific tasks are largely accomplished in software. The standardized design makes the DCS potentially compatible with multiple UGV platforms and eventual dual-use applications in commercial vehicles. More sophisticated functionality, such as remote control or autonomous navigation can be layered on top of the low level control supplied by DCS. Thus, the DCS can be an enabling component for development of advanced UGV technologies. ALso, intelligent nodes enable fault identification and orderly shutdown to be accomplished directly at the vehicle actuators. This SBIR is sponsored by the US Army Tank-Automotive Research, Development and Engineering Center.

  19. Chaos Control in Mechanical Systems

    Directory of Open Access Journals (Sweden)

    Marcelo A. Savi

    2006-01-01

    Full Text Available Chaos has an intrinsically richness related to its structure and, because of that, there are benefits for a natural system of adopting chaotic regimes with their wide range of potential behaviors. Under this condition, the system may quickly react to some new situation, changing conditions and their response. Therefore, chaos and many regulatory mechanisms control the dynamics of living systems, conferring a great flexibility to the system. Inspired by nature, the idea that chaotic behavior may be controlled by small perturbations of some physical parameter is making this kind of behavior to be desirable in different applications. Mechanical systems constitute a class of system where it is possible to exploit these ideas. Chaos control usually involves two steps. In the first, unstable periodic orbits (UPOs that are embedded in the chaotic set are identified. After that, a control technique is employed in order to stabilize a desirable orbit. This contribution employs the close-return method to identify UPOs and a semi-continuous control method, which is built up on the OGY method, to stabilize some desirable UPO. As an application to a mechanical system, a nonlinear pendulum is considered and, based on parameters obtained from an experimental setup, analyses are carried out. Signals are generated by numerical integration of the mathematical model and two different situations are treated. Firstly, it is assumed that all state variables are available. After that, the analysis is done from scalar time series and therefore, it is important to evaluate the effect of state space reconstruction. Delay coordinates method and extended state observers are employed with this aim. Results show situations where these techniques may be used to control chaos in mechanical systems.

  20. Learning fuzzy logic control system

    Science.gov (United States)

    Lung, Leung Kam

    1994-01-01

    The performance of the Learning Fuzzy Logic Control System (LFLCS), developed in this thesis, has been evaluated. The Learning Fuzzy Logic Controller (LFLC) learns to control the motor by learning the set of teaching values that are generated by a classical PI controller. It is assumed that the classical PI controller is tuned to minimize the error of a position control system of the D.C. motor. The Learning Fuzzy Logic Controller developed in this thesis is a multi-input single-output network. Training of the Learning Fuzzy Logic Controller is implemented off-line. Upon completion of the training process (using Supervised Learning, and Unsupervised Learning), the LFLC replaces the classical PI controller. In this thesis, a closed loop position control system of a D.C. motor using the LFLC is implemented. The primary focus is on the learning capabilities of the Learning Fuzzy Logic Controller. The learning includes symbolic representation of the Input Linguistic Nodes set and Output Linguistic Notes set. In addition, we investigate the knowledge-based representation for the network. As part of the design process, we implement a digital computer simulation of the LFLCS. The computer simulation program is written in 'C' computer language, and it is implemented in DOS platform. The LFLCS, designed in this thesis, has been developed on a IBM compatible 486-DX2 66 computer. First, the performance of the Learning Fuzzy Logic Controller is evaluated by comparing the angular shaft position of the D.C. motor controlled by a conventional PI controller and that controlled by the LFLC. Second, the symbolic representation of the LFLC and the knowledge-based representation for the network are investigated by observing the parameters of the Fuzzy Logic membership functions and the links at each layer of the LFLC. While there are some limitations of application with this approach, the result of the simulation shows that the LFLC is able to control the angular shaft position of the