WorldWideScience

Sample records for heavy vehicles motors

  1. 77 FR 30765 - Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems for Heavy Vehicles

    Science.gov (United States)

    2012-05-23

    ... CFR Part 571 Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems for Heavy... 571 RIN 2127-AK97 Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems for... a new Federal Motor Vehicle Safety Standard No. 136 to require electronic stability control (ESC...

  2. 76 FR 70128 - California State Motor Vehicle Pollution Control Standards; Amendments to the California Heavy...

    Science.gov (United States)

    2011-11-10

    ... AGENCY California State Motor Vehicle Pollution Control Standards; Amendments to the California Heavy... thereof shall adopt or attempt to enforce any standard relating to the control of emissions from new motor..., inspection or any other approval relating to the control of emissions from any new motor vehicle or new motor...

  3. 75 FR 70237 - California State Motor Vehicle Pollution Control Standards; California Heavy-Duty On-Highway Otto...

    Science.gov (United States)

    2010-11-17

    ... AGENCY California State Motor Vehicle Pollution Control Standards; California Heavy-Duty On-Highway Otto... thereof shall adopt or attempt to enforce any standard relating to the control of emissions from new motor..., inspection or any other approval relating to the control of emissions from any new motor vehicle or new motor...

  4. Accidents in The Netherlands involving heavy motor vehicles : an analysis concerning underrun protection of rear ends, compared to the sides and the front ends. On behalf of RDW Vehicle Technology & Information Centre.

    NARCIS (Netherlands)

    Kampen, L.T.B. van

    1998-01-01

    In this report accident data concerning heavy vehicles (all motor vehicles with a total weight of more than 3500 kg) are studied. Special attention is given to the question whether accidents involving heavy motor vehicles gave specific reason for concern regarding other road users with respect to un

  5. Accidents in The Netherlands involving heavy motor vehicles : an analysis concerning underrun protection of rear ends, compared to the sides and the front ends. On behalf of RDW Vehicle Technology & Information Centre.

    NARCIS (Netherlands)

    Kampen, L.T.B. van

    1998-01-01

    In this report accident data concerning heavy vehicles (all motor vehicles with a total weight of more than 3500 kg) are studied. Special attention is given to the question whether accidents involving heavy motor vehicles gave specific reason for concern regarding other road users with respect to un

  6. 75 FR 39251 - Control of Air Pollution From New Motor Vehicles: Announcement of Public Workshop for Heavy-Duty...

    Science.gov (United States)

    2010-07-08

    ... AGENCY Control of Air Pollution From New Motor Vehicles: Announcement of Public Workshop for Heavy-Duty... manufacturers have recently begun utilizing a NO X emission control technology called selective catalyst... ensure, among other things, that SCR-equipped engines are designed to properly control emissions as...

  7. The technologies for heavy vehicles motors and their fuels; Les technologies des moteurs de vehicules lourds et leurs carburants

    Energy Technology Data Exchange (ETDEWEB)

    Plassat, G.

    2005-07-01

    The heavy vehicles are those the total weight (charged) is more than 3,5 tons. This document provides a comparative and parametric analysis of the main technologies developed for the future buses. A detailed presentation is done for each technique, as the operating principles and the advantages and disadvantages facing the today solution. More particularly the author presents the evolution of the diesel-fuel motor, the motor optimization for specific fuel as the natural gas and the liquefied petroleum gas, the hybrid thermal-electric motor, the hydrogen fuel cells, the biofuels and the de-pollution systems to eliminate the NO{sub X} and the particles. (A.L.B.)

  8. Application for certification for 1978 model year heavy-duty vehicles - General Motors corporation

    Energy Technology Data Exchange (ETDEWEB)

    1978-03-01

    Every year each manufacturer of passenger cars, light-duty trucks, motorcycles or heavy-duty engines submits to EPA an application for certification. The application consists of two parts. In the part I, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission control systems. The part I also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. The part II application, submitted after emission testing is completed, contains the results of emission testing, a statement of compliance to the regulations, and maintenance instructions to be followed by the ultimate owners of the vehicles.

  9. Application for certification for 1979 model year for heavy-duty vehicles - General Motors

    Energy Technology Data Exchange (ETDEWEB)

    1978-11-21

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles or heavy-duty engines submits to EPA an application for certification. The application consists of two parts. In the part I, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems an exhaust and evaporative emission control systems. The part I also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. The part II application submitted after emission testing is completed, contains the results of emission testing, a statement of compliance to the regulations, and maintenance instructions to be followed by the ultimate owners of the vehicles.

  10. Application for certification for 1978 model year heavy-duty vehicles - General Motors Corporation, supplement

    Energy Technology Data Exchange (ETDEWEB)

    1978-03-01

    Every year each manufacturer of passenger cars, light-duty trucks, motorcycles or heavy-engines submits to EPA an application for certification. The application consists of two parts. In the part I, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission control systems. The part I also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. The part II application, submitted after emission testing is completed, contains the results of emission testing, a statement of compliance to the regulations, and maintenance instructions to be followed by the ultimate owners of the vehicles.

  11. Application for certification, 1986 model year heavy-duty vehicles - General Motors Corporation

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.

  12. Application for certification 1981 model year heavy duty gasoline vehicles - General Motors Corporation

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.

  13. Application for certification, 1986 model year heavy-duty vehicles/engines - General Motors Corporation

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.

  14. Application for certification 1987 model year heavy-duty vehicles/engines - General Motors Corporation

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. They also provide information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.

  15. Monitoring of heavy metal levels in roadside dusts of Thessaloniki, Greece in relation to motor vehicle traffic density and flow.

    Science.gov (United States)

    Ewen, Caroline; Anagnostopoulou, Maria A; Ward, Neil I

    2009-10-01

    In recent years, the level of heavy metal pollution in urban areas has been of considerable concern. The principal source has been attributed to the motor vehicle and increasing inner city congestion, which has lead to a change and enlargement of transport stop-start zones. These areas of high traffic density are associated with an increased release of heavy metals into the adjacent residential or commercial areas. Seventy-five roadside dust samples were collected throughout the inner city and by-pass motorway areas of Thessaloniki, Northern Greece. Samples were taken from arterial, major and minor roads, as well as the ring road, to compare and contrast the levels of heavy metals, namely Cu, Zn, Cd, Mn and Pb. Flame Atomic Absorption Spectroscopy (FAAS) was developed to quantitatively determine concentrations of both total element and geochemical fractionation, within the two dust particulate fraction sizes congestion/stop-start traffic patterns did influence and have led to increased levels of heavy metal deposition along inner city roads compared to levels observed on the new relief ring road. Dust particulate fraction sizes were only found to show statistically significant differences in cadmium and manganese, at the probability P 0.05 or 95% confidence limit. Road type was seen to have little affect on cadmium and manganese, though lead, copper and zinc were all found to show higher levels on the inner city routes. This can be related back to the wear-and-tear of vehicle components as a result of the stop-start traffic patterns (brake pads etc). Both Pb and Zn have shown to be in chemical forms that are bio available to ecosystems.

  16. 40 CFR 86.1816-08 - Emission standards for complete heavy-duty vehicles.

    Science.gov (United States)

    2010-07-01

    ... U.S. heavy-duty vehicle sales of complete heavy-duty Otto-cycle motor vehicles for model year 2008... complete heavy-duty Otto-cycle motor vehicles for model year 2008. (2)(i) Manufacturers certifying vehicles... Vehicles, Light-Duty Trucks, and Complete Otto-Cycle Heavy-Duty Vehicles § 86.1816-08 Emission...

  17. OPTIMIZATION OF MOTOR VEHICLE INDUSTRIES WASTEWATER TREATMENT METHODS WITH THE AIM OF HEAVY METALS REMOVAL AND WATER REUSE IN PILOT SCALE

    Directory of Open Access Journals (Sweden)

    S. A. Mirbagheri, M. Salehi M

    2006-10-01

    Full Text Available The waste of motor vehicle industries is mainly the result of washing, coloring and various stages of chassis manufacturing, which include oil, grease, dyestuff, chromium, phosphate and other pollutants. In the present research, extended aeration activated sludge biological treatment plant is being considered and evaluated, for the removal of heavy metals and pollution load from industrial wastes and sanitary wastewaters, and on the pilot scale for optimization of waste treatment method for motor vehicle industries. To accomplish the pilot experiments, the natural waste of Bahman motor vehicle factory is used. Effective factors on efficient removal of heavy metals and pollution load such as concentration of biological mass (MLVSS, COD, BOD, pH in the extended aeration activated sludge biological treatment system, in different ratios of the mixing of industrial waste to sanitary wastewater have been experimented and evaluated. The performance of the above system, in the best of conditions, removes about 90% of pollution load and 65% of heavy metals existing in the industrial wastes. After analyzing the experiments, it is concluded that the removal of heavy metals through biological methods is possible and moreover it is feasible to biologically treat the mixing of motor vehicle industries effluent and sanitary wastewater up to the ratio of one to one, if guided exactly and scientifically.

  18. Motor Vehicle Safety

    Science.gov (United States)

    ... to prevent these crashes is one part of motor vehicle safety. Here are some things you can do to be safer on the road: Make sure your vehicle is safe and in working order Use car seats for children Wear your seat belt Don' ...

  19. 75 FR 76692 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Science.gov (United States)

    2010-12-09

    ..., and 571 Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY... passenger vehicles, trucks, buses, trailers, incomplete vehicles, motorcycles, and motor vehicle...

  20. Quantifying on-road emissions from gasoline-powered motor vehicles: accounting for the presence of medium- and heavy-duty diesel trucks.

    Science.gov (United States)

    Dallmann, Timothy R; Kirchstetter, Thomas W; DeMartini, Steven J; Harley, Robert A

    2013-12-03

    Vehicle emissions of nitrogen oxides (NOx), carbon monoxide (CO), fine particulate matter (PM2.5), organic aerosol (OA), and black carbon (BC) were measured at the Caldecott tunnel in the San Francisco Bay Area. Measurements were made in bore 2 of the tunnel, where light-duty (LD) vehicles accounted for >99% of total traffic and heavy-duty trucks were not allowed. Prior emission studies conducted in North America have often assumed that route- or weekend-specific prohibitions on heavy-duty truck traffic imply that diesel contributions to pollutant concentrations measured in on-road settings can be neglected. However, as light-duty vehicle emissions have declined, this assumption can lead to biased results, especially for pollutants such as NOx, OA, and BC, for which diesel-engine emission rates are high compared to corresponding values for gasoline engines. In this study, diesel vehicles (mostly medium-duty delivery trucks with two axles and six tires) accounted for emission factors for light-duty vehicles are, respectively, 10 and 50 times lower than for heavy-duty diesel trucks. Using measured emission factors from this study and publicly available data on taxable fuel sales, as of 2010, LD gasoline vehicles were estimated to be responsible for 85%, 18%, 18%, and 6% of emissions of CO, NOx, OA, and BC, respectively, from on-road motor vehicles in the United States.

  1. ASSESSMENT OF THE GENERAL PSYCHOLOGICAL AND FUNCTIONAL CHARACTERISTICS CAUSED BY VIBRATIONS AT DRIVERS OF HEAVY MOTOR VEHICLES

    Directory of Open Access Journals (Sweden)

    Sanela Čajlaković Kurtalić

    2014-09-01

    Full Text Available In this paper we presented a research that estimates general psychological and functional characteristics of motor vehicle drivers, with the goal of determining the adverse effects of noise and vibration on the drivers. The study was conducted on a sample of 56 participants, professional drivers of motor vehicles, randomly chosen from companies of various types operating in transport of passengers and goods. For the evaluation of the results,we used descriptive and correlational analysis. The results showed that there were significant negative side effects caused by the nature of work of drivers, especially those under the influence of noise and vibration, which are even more significant in older participants and those with more years of service and those who spend more time driving during the interval of 24 hours , as well as those who drive heavier vehicles.

  2. Remote control for motor vehicle

    Science.gov (United States)

    Johnson, Dale R. (Inventor); Ciciora, John A. (Inventor)

    1984-01-01

    A remote controller is disclosed for controlling the throttle, brake and steering mechanism of a conventional motor vehicle, with the remote controller being particularly advantageous for use by severely handicapped individuals. The controller includes a remote manipulator which controls a plurality of actuators through interfacing electronics. The remote manipulator is a two-axis joystick which controls a pair of linear actuators and a rotary actuator, with the actuators being powered by electric motors to effect throttle, brake and steering control of a motor vehicle adapted to include the controller. The controller enables the driver to control the adapted vehicle from anywhere in the vehicle with one hand with minimal control force and range of motion. In addition, even though a conventional vehicle is adapted for use with the remote controller, the vehicle may still be operated in the normal manner.

  3. 29 CFR 1926.601 - Motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Motor vehicles. 1926.601 Section 1926.601 Labor Regulations...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Motor Vehicles, Mechanized Equipment, and Marine Operations § 1926.601 Motor vehicles. (a) Coverage. Motor vehicles as covered by this part are those...

  4. 41 CFR 102-34.85 - What motor vehicles require motor vehicle identification?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What motor vehicles require motor vehicle identification? 102-34.85 Section 102-34.85 Public Contracts and Property Management... 34-MOTOR VEHICLE MANAGEMENT Identifying and Registering Motor Vehicles Motor Vehicle...

  5. Heavy Duty Vehicle Futures Analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Askin, Amanda Christine; Barter, Garrett.; West, Todd H.; Manley, Dawn Kataoka

    2014-05-01

    This report describes work performed for an Early Career Research and Development project. This project developed a heavy-duty vehicle (HDV) sector model to assess the factors influencing alternative fuel and efficiency technology adoption. This model builds on a Sandia light duty vehicle sector model and provides a platform for assessing potential impacts of technological advancements developed at the Combustion Research Facility. Alternative fuel and technology adoption modeling is typically developed around a small set of scenarios. This HDV sector model segments the HDV sector and parameterizes input values, such as fuel prices, efficiencies, and vehicle costs. This parameterization enables sensitivity and trade space analyses to identify the inputs that are most associated with outputs of interest, such as diesel consumption and greenhouse gas emissions. Thus this analysis tool enables identification of the most significant HDV sector drivers that can be used to support energy security and climate change goals.

  6. CDC Vital Signs: Motor Vehicle Crash Deaths

    Science.gov (United States)

    ... government is Tracking the nation’s progress in reducing crash injuries and deaths. www.cdc.gov/psr/national-summary/ ... Motor Vehicle Crash Deaths Vital Signs: Motor Vehicle Crash Injuries Vital Signs: Child Passenger Safety CDC: Child Passenger ...

  7. 47 CFR 32.2112 - Motor vehicles.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Motor vehicles. 32.2112 Section 32.2112... FOR TELECOMMUNICATIONS COMPANIES Instructions for Balance Sheet Accounts § 32.2112 Motor vehicles. This account shall include the original cost of motor vehicles of the type which are designed...

  8. 33 CFR 127.1311 - Motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Motor vehicles. 127.1311 Section... Waterfront Facilities Handling Liquefied Hazardous Gas Operations § 127.1311 Motor vehicles. (a) When LHG is... operator shall ensure that no person— (1) Stops or parks a motor vehicle in a space other than a...

  9. 77 FR 20558 - Federal Motor Vehicle Safety Standards; Platform Lifts for Motor Vehicles; Platform Lift...

    Science.gov (United States)

    2012-04-05

    ... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AJ93 Federal Motor Vehicle Safety Standards; Platform Lifts for Motor Vehicles; Platform Lift Installations in Motor Vehicles AGENCY: National.... SUMMARY: This document adopts amendments to the Federal motor vehicle safety standards on platform...

  10. 78 FR 32223 - Control of Air Pollution From Motor Vehicles: Tier 3 Motor Vehicle Emission and Fuel Standards

    Science.gov (United States)

    2013-05-29

    ... Motor Vehicles: Tier 3 Motor Vehicle Emission and Fuel Standards AGENCY: Environmental Protection Agency... Pollution from Motor Vehicles: Tier 3 Motor Vehicle Emission and Fuel Standards'' (the proposed rule...

  11. 33 CFR 127.311 - Motor vehicles.

    Science.gov (United States)

    2010-07-01

    ...) WATERFRONT FACILITIES WATERFRONT FACILITIES HANDLING LIQUEFIED NATURAL GAS AND LIQUEFIED HAZARDOUS GAS Waterfront Facilities Handling Liquefied Natural Gas Operations § 127.311 Motor vehicles. (a) The...

  12. Heavy Vehicles on Minor Highway Bridges

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Nielsen, Søren R. K.; Enevoldsen, I.

    the results obtained using the numerical models given in details in "Heavy Vehicles on Minor Highway Bridges : dynamic modelling of vehicles and bridges". The models are established using a ordinary vehicle which consists of a 48 t Scania with a 3 axle tractor and a 3 axle trailer, joined in a flexible hinge...

  13. 77 FR 69586 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Science.gov (United States)

    2012-11-20

    ... National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration..., and motor vehicle equipment. DATES: You should submit comments early enough to ensure that...

  14. 75 FR 5553 - Federal Motor Vehicle Safety Standards; Motor Vehicle Brake Fluids

    Science.gov (United States)

    2010-02-03

    ... Federal Motor Vehicle Safety Standards; Motor Vehicle Brake Fluids AGENCY: National Highway Traffic Safety... NPRM proposes to amend FMVSS No. 116, Motor Vehicle Brake Fluids, so that brake fluids would be tested... Date VII. Rulemaking Analyses and Notices VIII. Public Participation I. Background Federal...

  15. 49 CFR 574.9 - Requirements for motor vehicle dealers.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Requirements for motor vehicle dealers. 574.9... RECORDKEEPING § 574.9 Requirements for motor vehicle dealers. (a) Each motor vehicle dealer who sells a used motor vehicle for purposes other than resale, who leases a motor vehicle for more than 60 days, that...

  16. 48 CFR 908.7101 - Motor vehicles.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Motor vehicles. 908.7101 Section 908.7101 Federal Acquisition Regulations System DEPARTMENT OF ENERGY COMPETITION ACQUISITION PLANNING REQUIRED SOURCES OF SUPPLIES AND SERVICES Acquisition of Special Items 908.7101 Motor vehicles....

  17. Vital Signs-Motor Vehicle Crash Injuries

    Centers for Disease Control (CDC) Podcasts

    2014-10-07

    This podcast is based on the October 2014 CDC Vital Signs report. Motor vehicle crashes are costly and preventable. Learn what can be done to help prevent motor vehicle injuries.  Created: 10/7/2014 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 10/7/2014.

  18. Motor Vehicle Crash Injuries PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2014-10-07

    This 60 second Public Service Announcement is based on the October 2014 CDC Vital Signs report. Motor vehicle crashes are costly and preventable. Learn what can be done to help prevent motor vehicle injuries.  Created: 10/7/2014 by National Center for Injury Prevention and Control (NCIPC).   Date Released: 10/7/2014.

  19. 40 CFR 86.008-10 - Emission standards for 2008 and later model year Otto-cycle heavy-duty engines and vehicles.

    Science.gov (United States)

    2010-07-01

    ... exceed 50 percent of the manufacturer's U.S.-directed production of heavy-duty Otto-cycle motor vehicle... heavy-duty Otto-cycle motor vehicle engines for model year 2008. (2)(i) Manufacturers certifying engines... model year Otto-cycle heavy-duty engines and vehicles. 86.008-10 Section 86.008-10 Protection...

  20. Gasoline Prices and Motor Vehicle Fatalities

    Science.gov (United States)

    Grabowski, David C.; Morrisey, Michael A.

    2004-01-01

    Fatal motor vehicle crashes per capita remained relatively stable over the 1990s, in spite of new traffic safety laws and vehicle innovations. One explanation for this stability is that the price of gasoline declined, which resulted in more vehicle miles traveled and potentially more fatalities. By using 1983-2000 monthly gasoline price and…

  1. Observed seatbelt usage among drivers of heavy commercial vehicles in Utah.

    Science.gov (United States)

    Cook, Lawrence J; Hoggins, Jacqueline L; Olson, Lenora M

    2008-07-01

    National seatbelt observation surveys indicate commercial vehicle drivers' seatbelt usage is lower than passenger vehicle drivers. Seatbelts are effective at preventing injuries and death following motor vehicle crashes and an important component in decreasing morbidity and mortality related to commercial vehicle crashes. We conducted an observation survey of heavy commercial vehicle drivers' seatbelt usage to gather baseline data and to aid in planning prevention programs. We found that the observed heavy commercial vehicle drivers had a seatbelt usage rate of 64%, approximately 20% lower than the national rate for drivers of passenger vehicles. Our observations demonstrate a need to increase seatbelt usage among heavy commercial vehicle drivers. Specific programs and resources for intervention programs targeting heavy commercial vehicle drivers are warranted.

  2. 32 CFR 935.140 - Motor vehicle maintenance and equipment.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Motor vehicle maintenance and equipment. 935.140... AND INSULAR REGULATIONS WAKE ISLAND CODE Motor Vehicle Code § 935.140 Motor vehicle maintenance and equipment. (a) Each person who has custody of a motor vehicle on Wake Island shall present that vehicle...

  3. Motor Torque Calculations For Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Saurabh Chauhan

    2015-08-01

    Full Text Available Abstract It is estimated that 25 of the total cars across the world will run on electricity by 2025. An important component that is an integral part of all electric vehicles is the motor. The amount of torque that the driving motor delivers is what plays a decisive role in determining the speed acceleration and performance of an electric vehicle. The following work aims at simplifying the calculations required to decide the capacity of the motor that should be used to drive a vehicle of particular specifications.

  4. 78 FR 20881 - Control of Air Pollution From Motor Vehicles: Tier 3 Motor Vehicle Emission and Fuel Standards...

    Science.gov (United States)

    2013-04-08

    ... AGENCY 40 CFR Part 80 RIN 2060-AQ86 Control of Air Pollution From Motor Vehicles: Tier 3 Motor Vehicle... hearings to be held for the proposed rule ``Control of Air Pollution from Motor Vehicles: Tier 3 Motor... 2017, as part of a systems approach to addressing the impacts of motor vehicles and fuels on air...

  5. Syncope and Motor Vehicle Crash Risk

    DEFF Research Database (Denmark)

    Numé, Anna-Karin; Gislason, Gunnar; Christiansen, Christine B

    2016-01-01

    IMPORTANCE: Syncope may have serious consequences for traffic safety. Current clinical guideline recommendations on driving following syncope are primarily based on expert consensus. OBJECTIVE: To identify whether there is excess risk of motor vehicle crashes among patients with syncope compared.......74-1.91) after adjustment for age, sex, socioeconomic position, and relevant comorbidities and pharmacotherapy. Men had a relatively higher rate of motor vehicle crashes (RR, 1.91; 95% CI, 1.79-2.03) than women (RR, 1.74; 95% CI, 1.63-1.87). The excess risk of motor vehicle crashes persisted throughout...... identified 41 039 individuals with a first-time diagnosis of syncope from emergency department or hospital. MAIN OUTCOMES AND MEASURES: Rate of motor vehicle crashes (including nonfatal and fatal crashes), based on multivariate Poisson regression models, using the total Danish population as reference...

  6. Alcohol Advertising and Motor Vehicle Fatalities

    OpenAIRE

    Henry Saffer

    1994-01-01

    The purpose of this paper is to empirically estimate the effect of alcohol advertising on motor vehicle fatalities. The concept of an industry level advertising response function is developed and other empirical issues in estimating the effects of advertising are reviewed. The data set consists of quarterly observations, from 1986 to 1989, for 75 advertising markets in the United States and includes 1200 observations. Since motor vehicle fatalities and alcohol advertising are jointly determin...

  7. 48 CFR 945.570-8 - Reporting motor vehicle data.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Reporting motor vehicle... Reporting motor vehicle data. (a) Contractors conducting motor vehicle operations shall forward annually (on or before December 1) to the contracting officer their plan for acquisition of motor vehicles for...

  8. 49 CFR 541.5 - Requirements for passenger motor vehicles.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Requirements for passenger motor vehicles. 541.5... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE THEFT PREVENTION STANDARD § 541.5 Requirements for passenger motor vehicles. (a) Each passenger motor vehicle subject...

  9. 47 CFR 32.6112 - Motor vehicle expense.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Motor vehicle expense. 32.6112 Section 32.6112... FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6112 Motor vehicle expense. (a... motor vehicles, such as chauffeurs and shuttle bus drivers. The costs of users of motor vehicles...

  10. 36 CFR 1004.4 - Report of motor vehicle accident.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Report of motor vehicle... SAFETY § 1004.4 Report of motor vehicle accident. (a) The operator of a motor vehicle involved in an... by this section do not relieve the operator and occupants of a motor vehicle involved in an...

  11. 40 CFR 85.1703 - Definition of motor vehicle.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Definition of motor vehicle. 85.1703... (CONTINUED) CONTROL OF AIR POLLUTION FROM MOBILE SOURCES Exclusion and Exemption of Motor Vehicles and Motor Vehicle Engines § 85.1703 Definition of motor vehicle. (a) For the purpose of determining...

  12. 32 CFR 935.139 - Motor vehicle operator qualifications.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Motor vehicle operator qualifications. 935.139... AND INSULAR REGULATIONS WAKE ISLAND CODE Motor Vehicle Code § 935.139 Motor vehicle operator qualifications. (a) No person may operate a privately owned motor vehicle on Wake Island unless he has an...

  13. Physical context management for a motor vehicle

    Science.gov (United States)

    Dixon, Kevin R [Albuquerque, NM; Forsythe, James C [Sandia Park, NM; Lippitt, Carl E [Albuquerque, NM; Lippitt, legal representative, Lois Diane

    2009-10-27

    Computer software for and a method of enhancing safety for an operator of a motor vehicle comprising employing a plurality of sensors of vehicle and operator conditions, matching collective output from the sensors against a plurality of known dangerous conditions, and preventing certain activity of the operator if a known dangerous condition is detected.

  14. 41 CFR 109-38.5103 - Motor vehicle utilization standards.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Motor vehicle... AVIATION, TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.51-Utilization of Motor Equipment § 109-38.5103 Motor vehicle utilization standards. (a) The following average utilization...

  15. PROBLEMS OF SAFETY OF MOTOR VEHICLES

    Directory of Open Access Journals (Sweden)

    A. Stepanov

    2015-12-01

    Full Text Available The article deals with the up-to-date problem of motor vehicles safety. The author concludes that traffic safety in the transport system depends on the type and, accordingly, the measures taken in vehicles to protect objects from unauthorized access and, as a consequence, from the possibility of accident or disaster occurrence, while the safety of vehicles on a traffic route is determined by external natural impacts.

  16. 76 FR 51120 - Denial of Motor Vehicle Defect Petition

    Science.gov (United States)

    2011-08-17

    ... National Highway Traffic Safety Administration Denial of Motor Vehicle Defect Petition AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of Transportation. ACTION: Denial of motor... System (FARS) tracks all fatal crashes involving motor vehicles in the United States. An analysis...

  17. Variable-Reluctance Motor For Electric Vehicles

    Science.gov (United States)

    Lang, Jeffrey H.

    1987-01-01

    Report describes research on variable-reluctance electric-motor drive for eventual use in electric-vehicle propulsion. Primary design and performance criteria were torque and power output per unit mass of motor, cost, and drive efficiency. For each criterion, optimized drive design developed, and designs unified to yield single electric-vehicle drive. Scaled-down motor performed as expected. Prototype of paraplegic lift operated by toggle switch and joystick. Lift plugs into household electrical outlet for recharging when not in use.

  18. Management, Acquisition, and Use of Motor Vehicles

    Science.gov (United States)

    1994-03-01

    issuing authority. e. Report suspension or revocation of their State motor vehicle operator license as required by the vehicle issuing authority. f...40,000 and Up All 25,000 Motorcycle 4/A All 3,000 Scooter , 3- or 4-Wheel N/A Gasoline 2,400 2-10 Figure 2-1. DD Form 1970, "Motor Equipment Utilization...adequately supported through the use of alternative transportation resources (such as scooters , bicycles, mopeds)? (4) Will the vehicle meet utilization

  19. MOTOR VEHICLE SAFETY RESEARCH METHODOLOGY

    Directory of Open Access Journals (Sweden)

    A. Stepanov

    2015-07-01

    Full Text Available The issues of vehicle safety are considered. The methodology of approach to analyzing and solving the problem of safety management of vehicles and overall traffic is offered. The distinctive features of organization and management of vehicle safety are shown. There has been drawn a conclusion that the methodological approach to solving traffic safety problems is reduced to selection and classification of safety needs.

  20. Auditory perception of motor vehicle travel paths.

    Science.gov (United States)

    Ashmead, Daniel H; Grantham, D Wesley; Maloff, Erin S; Hornsby, Benjamin; Nakamura, Takabun; Davis, Timothy J; Pampel, Faith; Rushing, Erin G

    2012-06-01

    These experiments address concerns that motor vehicles in electric engine mode are so quiet that they pose a risk to pedestrians, especially those with visual impairments. The "quiet car" issue has focused on hybrid and electric vehicles, although it also applies to internal combustion engine vehicles. Previous research has focused on detectability of vehicles, mostly in quiet settings. Instead, we focused on the functional ability to perceive vehicle motion paths. Participants judged whether simulated vehicles were traveling straight or turning, with emphasis on the impact of background traffic sound. In quiet, listeners made the straight-or-turn judgment soon enough in the vehicle's path to be useful for deciding whether to start crossing the street. This judgment is based largely on sound level cues rather than the spatial direction of the vehicle. With even moderate background traffic sound, the ability to tell straight from turn paths is severely compromised. The signal-to-noise ratio needed for the straight-or-turn judgment is much higher than that needed to detect a vehicle. Although a requirement for a minimum vehicle sound level might enhance detection of vehicles in quiet settings, it is unlikely that this requirement would contribute to pedestrian awareness of vehicle movements in typical traffic settings with many vehicles present. The findings are relevant to deliberations by government agencies and automobile manufacturers about standards for minimum automobile sounds and, more generally, for solutions to pedestrians' needs for information about traffic, especially for pedestrians with sensory impairments.

  1. Heavy and Overweight Vehicle Defects Interim Report

    Energy Technology Data Exchange (ETDEWEB)

    Siekmann, Adam [ORNL; Capps, Gary J [ORNL

    2012-12-01

    The Federal Highway Administration (FHWA), along with the Federal Motor Carrier Safety Administration (FMCSA), has an interest in overweight commercial motor vehicles, how they affect infrastructure, and their impact on safety on the nation s highways. To assist both FHWA and FMCSA in obtaining more information related to this interest, data was collected and analyzed from two separate sources. A large scale nationwide data collection effort was facilitated by the Commercial Vehicle Safety Alliance as part of a special study on overweight vehicles and an additional, smaller set, of data was collected from the state of Tennessee which included a much more detailed set of data. Over a six-month period, 1,873 Level I inspections were performed in 18 different states that volunteered to be a part of this study. Of the 1,873 inspections, a vehicle out-of-service (OOS) violation was found on 44.79% of the vehicles, a rate significantly higher than the national OOS rate of 27.23%. The main cause of a vehicle being placed OOS was brake-related defects, with approximately 30% of all vehicles having an OOS brake violation. Only about 4% of vehicles had an OOS tire violation, and even fewer had suspension and wheel violations. Vehicle weight violations were most common on an axle group as opposed to a gross vehicle weight violation. About two thirds of the vehicles cited with a weight violation were overweight on an axle group with an average amount of weight over the legal limit of about 2,000 lbs. Data collection is scheduled to continue through January 2014, with more potentially more states volunteering to collect data. More detailed data collections similar to the Tennessee data collection will also be performed in multiple states.

  2. 48 CFR 908.7101-4 - Replacement of motor vehicles.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Replacement of motor....7101-4 Replacement of motor vehicles. (a) The replacement of motor vehicles shall be in accordance with... Heads of Contracting Activities may arrange to sell, as exchange sales, used motor vehicles...

  3. 36 CFR 261.13 - Motor vehicle use.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Motor vehicle use. 261.13... General Prohibitions § 261.13 Motor vehicle use. After National Forest System roads, National Forest... have been identified on a motor vehicle use map, it is prohibited to possess or operate a motor...

  4. 48 CFR 945.570-7 - Disposition of motor vehicles.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Disposition of motor... Disposition of motor vehicles. (a) The contractor shall dispose of DOE-owned motor vehicles as directed by the contracting officer. (b) DOE-owned motor vehicles may be disposed of as exchange/sale items when directed...

  5. 40 CFR 86.098-10 - Emission standards for 1998 and later model year Otto-cycle heavy-duty engines and vehicles.

    Science.gov (United States)

    2010-07-01

    ... Otto-cycle heavy-duty engine. (d) Every manufacturer of new motor vehicle engines subject to the... model year Otto-cycle heavy-duty engines and vehicles. 86.098-10 Section 86.098-10 Protection of... Heavy-Duty Vehicles § 86.098-10 Emission standards for 1998 and later model year Otto-cycle...

  6. 78 FR 4193 - Petition for Exemption From the Federal Motor Vehicle Motor Theft Prevention Standard; Volvo

    Science.gov (United States)

    2013-01-18

    ... National Highway Traffic Safety Administration Petition for Exemption From the Federal Motor Vehicle Motor... is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the... the MY 2014 S60 vehicle line is effective in reducing and deterring motor vehicle theft. Volvo...

  7. 78 FR 77790 - Petition for Exemption From the Federal Motor Vehicle Theft Prevention Standard; General Motors...

    Science.gov (United States)

    2013-12-24

    ... National Highway Traffic Safety Administration Petition for Exemption From the Federal Motor Vehicle Theft Prevention Standard; General Motors Corporation AGENCY: National Highway Traffic Safety Administration... full General Motors Corporation's (GM) petition for an exemption of the Cadillac SRX vehicle line...

  8. Electronically commutated motors for vehicle applications

    Science.gov (United States)

    Echolds, E. F.

    1980-02-01

    Two permanent magnet electronically commutated motors for electric vehicle traction are discussed. One, based on existing technology, produces 23 kW (peak) at 26,000 rpm, and 11 kW continuous at 18,000 rpm. The motor has a conventional design: a four-pole permanent magnet rotor and a three-phase stator similar to those used on ordinary induction motors. The other, advanced technology motor, is rated at 27 kW (peak) at 14,000 rpm, and 11 kW continuous at 10,500 rpm. The machine employs a permanent magnet rotor and a novel ironless stator design in an axial air gap, homopolar configuration. Comparison of the new motors with conventional brush type machines indicates potential for substantial cost savings.

  9. Propulsion Wheel Motor for an Electric Vehicle

    Science.gov (United States)

    Figuered, Joshua M. (Inventor); Herrera, Eduardo (Inventor); Waligora, Thomas M. (Inventor); Bluethmann, William J. (Inventor); Farrell, Logan Christopher (Inventor); Lee, Chunhao J. (Inventor); Vitale, Robert L. (Inventor); Winn, Ross Briant (Inventor); Eggleston, IV, Raymond Edward (Inventor); Guo, Raymond (Inventor); hide

    2016-01-01

    A wheel assembly for an electric vehicle includes a wheel rim that is concentrically disposed about a central axis. A propulsion-braking module is disposed within an interior region of the wheel rim. The propulsion-braking module rotatably supports the wheel rim for rotation about the central axis. The propulsion-braking module includes a liquid cooled electric motor having a rotor rotatable about the central axis, and a stator disposed radially inside the rotor relative to the central axis. A motor-wheel interface hub is fixedly attached to the wheel rim, and is directly attached to the rotor for rotation with the rotor. The motor-wheel interface hub directly transmits torque from the electric motor to the wheel rim at a 1:1 ratio. The propulsion-braking module includes a drum brake system having an electric motor that rotates a cam device, which actuates the brake shoes.

  10. Fetal trauma from motor vehicle collisions.

    Science.gov (United States)

    Friese, Greg; Wojciehoski, Randal F

    2005-07-01

    To summarize: The best fetal protection is proper maternal use of seat belt restraints. All pregnant occupants in a motor vehicle crash require physician evaluation. Focus on maternal assessment. Maternal stability is the best indicator of fetal stability. Key treatments are high-flow oxygen, i.v. fluid loading and immobilizing in left lateral position. Evaluate the fetus after maternal stabilization.

  11. 75 FR 73998 - Federal Motor Vehicle Safety Standards; New Pneumatic Tires for Motor Vehicles With a Gross...

    Science.gov (United States)

    2010-11-30

    ... Vehicle Safety Standards; New Pneumatic Tires for Motor Vehicles With a Gross Vehicle Weight Rating (GVWR... Federal motor vehicle safety standard (FMVSS) that applies to new pneumatic tires for use on vehicles with... (NPRM) proposing to upgrade FMVSS No. 119 (49 CFR 571.119), which applies to new pneumatic tires...

  12. 78 FR 31536 - California State Nonroad Engine Pollution Control Standards; In-Use Heavy Duty Vehicles (as...

    Science.gov (United States)

    2013-05-24

    ... Diesel Particulate Matter, Oxides of Nitrogen and Other Criteria Pollutants from In-Use Heavy-Duty Diesel... motor vehicles which are not the subject of this decision (such regulations are not preempted under the... subsection in the context of section 209(b) motor vehicle waivers).\\8\\ \\6\\ 59 FR 36969 (July 20, 1994)....

  13. Dynamics of Motorized Vehicle Flow under Mixed Traffic Circumstance*

    Institute of Scientific and Technical Information of China (English)

    GUO nong-Wei; GAO Zi-You; ZHAO Xiao-Mei; XIE Dong-Fan

    2011-01-01

    To study the dynamics of mixed traffic flow consisting of motorized and non-motorized vehicles, a carfollowing model based on the principle of collision free and cautious driving is proposed.Lateral friction and overlapping driving are introduced to describe the interactions between motorized vehicles and non-motorized vehicles.By numerical simulations, the flux-density relation, the temporal-spatial dynamics, and the velocity evolution are investigated in detail.The results indicate non-motorized vehicles have a significant impact on the motorized vehicle flow and cause the maximum flux to decline by about 13%.Non-motorized vehicles can decrease the motorized vehicle velocity and cause velocity oscillation when the motorized vehicle density is low.Moreover, non-motorized vehicles show a significant damping effect on the oscillating velocity when the density is medium and high, and such an effect weakens as motorized vehicle densityincreases.The results also stress the necessity for separating motorized vehicles from non-motorized vehicles.

  14. Lightweight Composite Materials for Heavy Duty Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Pruez, Jacky; Shoukry, Samir; Williams, Gergis; Shoukry, Mark

    2013-08-31

    The main objective of this project is to develop, analyze and validate data, methodologies and tools that support widespread applications of automotive lightweighting technologies. Two underlying principles are guiding the research efforts towards this objective: • Seamless integration between the lightweight materials selected for certain vehicle systems, cost-effective methods for their design and manufacturing, and practical means to enhance their durability while reducing their Life-Cycle-Costs (LCC). • Smooth migration of the experience and findings accumulated so far at WVU in the areas of designing with lightweight materials, innovative joining concepts and durability predictions, from applications to the area of weight savings for heavy vehicle systems and hydrogen storage tanks, to lightweighting applications of selected systems or assemblies in light–duty vehicles.

  15. Heavy Vehicles on Minor Highway Bridges

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Nielsen, Søren R. K.; Enevoldsen, I.

    of heavier trucks moving at larger speeds, and partly because the authorities want to permit transportation of special heavy goods at a larger part of the road net. These needs will in many cases cause the strengthening of the bridges becomes necessary. In order to keep the expenses of such strengthening...... projects at a minimum, it is necessary to perform accurate estimates of the dynamic amplification factor (defined as the dynamic load effect divided by the static load effect from the vehicles), so this quantity is neither over- nor underestimated. The principal aims of the present paper are to establish...... the numerical models for the mathematical models of the vehicles and the bridge from which the load amplification factors can be estimated assuming that the dynamic parameters of the vehicles and the modal parameters of the bridge are known....

  16. The Heavy Vehicle Study: a case-control study investigating risk factors for crash in long distance heavy vehicle drivers in Australia

    Directory of Open Access Journals (Sweden)

    Grunstein Ron R

    2010-03-01

    Full Text Available Abstract Background Heavy vehicle transportation continues to grow internationally; yet crash rates are high, and the risk of injury and death extends to all road users. The work environment for the heavy vehicle driver poses many challenges; conditions such as scheduling and payment are proposed risk factors for crash, yet the precise measure of these needs quantifying. Other risk factors such as sleep disorders including obstructive sleep apnoea have been shown to increase crash risk in motor vehicle drivers however the risk of heavy vehicle crash from this and related health conditions needs detailed investigation. Methods and Design The proposed case control study will recruit 1034 long distance heavy vehicle drivers: 517 who have crashed and 517 who have not. All participants will be interviewed at length, regarding their driving and crash history, typical workloads, scheduling and payment, trip history over several days, sleep patterns, health, and substance use. All participants will have administered a nasal flow monitor for the detection of obstructive sleep apnoea. Discussion Significant attention has been paid to the enforcement of legislation aiming to deter problems such as excess loading, speeding and substance use; however, there is inconclusive evidence as to the direction and strength of associations of many other postulated risk factors for heavy vehicle crashes. The influence of factors such as remuneration and scheduling on crash risk is unclear; so too the association between sleep apnoea and the risk of heavy vehicle driver crash. Contributory factors such as sleep quality and quantity, body mass and health status will be investigated. Quantifying the measure of effect of these factors on the heavy vehicle driver will inform policy development that aims toward safer driving practices and reduction in heavy vehicle crash; protecting the lives of many on the road network.

  17. 40 CFR 69.51 - Motor vehicle diesel fuel.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Motor vehicle diesel fuel. 69.51... (CONTINUED) SPECIAL EXEMPTIONS FROM REQUIREMENTS OF THE CLEAN AIR ACT Alaska § 69.51 Motor vehicle diesel... motor vehicle diesel fuel standards and dye provisions under 40 CFR 80.520 and associated...

  18. 28 CFR 29.9 - Motor vehicles for hire.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Motor vehicles for hire. 29.9 Section 29.9 Judicial Administration DEPARTMENT OF JUSTICE MOTOR VEHICLE THEFT PREVENTION ACT REGULATIONS § 29.9 Motor vehicles for hire. (a) Any person who is in the business of renting or leasing...

  19. 40 CFR 79.33 - Motor vehicle diesel fuel.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Motor vehicle diesel fuel. 79.33... (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.33 Motor vehicle diesel fuel. (a) The following fuels commonly or commercially known or sold as motor vehicle diesel...

  20. 28 CFR 29.8 - Motor vehicle owner participation.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Motor vehicle owner participation. 29.8 Section 29.8 Judicial Administration DEPARTMENT OF JUSTICE MOTOR VEHICLE THEFT PREVENTION ACT REGULATIONS § 29.8 Motor vehicle owner participation. In order to participate in this program, the owner(s) of...

  1. 76 FR 24402 - Federal Motor Vehicle Theft Prevention Standard

    Science.gov (United States)

    2011-05-02

    ... National Highway Traffic Safety Administration 49 CFR Part 541 RIN 2127-AK81 Federal Motor Vehicle Theft... areas on high theft major parts of motor vehicles. E-mail is now included as a means to submit the... motor vehicle lines subject to parts marking, and manufacturers of replacement parts designed for...

  2. 41 CFR 101-25.402 - Motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Motor vehicles. 101-25.402 Section 101-25.402 Public Contracts and Property Management Federal Property Management... Standards § 101-25.402 Motor vehicles. Replacement of motor vehicles shall be in accordance with...

  3. 77 FR 37477 - Federal Motor Vehicle Safety Standards; Glazing Materials

    Science.gov (United States)

    2012-06-21

    ... CFR Part 571 Federal Motor Vehicle Safety Standards; Glazing Materials; Proposed Rule #0;#0;Federal... TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AL03 Federal Motor Vehicle.... The changes proposed in this NPRM to the Federal motor vehicle safety standard on glazing...

  4. 32 CFR 935.51 - Motor vehicle violations.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Motor vehicle violations. 935.51 Section 935.51... REGULATIONS WAKE ISLAND CODE Penalties § 935.51 Motor vehicle violations. Whoever is found guilty of a... than 30 days, or suspension or revocation of his motor vehicle operator's permit, or any combination...

  5. 77 FR 48105 - Federal Motor Vehicle Safety Standards; Motorcycle Helmets

    Science.gov (United States)

    2012-08-13

    ... National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards... rule amended the Federal Motor Vehicle Safety Standard for motorcycle helmets. Specifically, the final...\\ Final Rule, Federal Motor Vehicle Safety Standards; Motorcycle Helmets, 76 FR 28132 (May 13, 2011)....

  6. 40 CFR 52.2424 - Motor vehicle emissions budgets.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Motor vehicle emissions budgets. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Virginia § 52.2424 Motor vehicle emissions budgets. (a) Motor vehicle emissions budget for the Hampton Roads maintenance area adjusting...

  7. 48 CFR 970.2307-1 - Motor vehicle fleet operations.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Motor vehicle fleet..., Renewable Energy Technologies, Occupational Safety and Drug-Free Work Place 970.2307-1 Motor vehicle fleet... that the Federal motor vehicle fleet will serve as an example and provide a leadership role in...

  8. 77 FR 73912 - Used Motor Vehicle Trade Regulation Rule

    Science.gov (United States)

    2012-12-12

    ... CFR Part 455 Used Motor Vehicle Trade Regulation Rule AGENCY: Federal Trade Commission. ACTION: Final... review of its Used Motor Vehicle Trade Regulation Rule (``Used Car Rule'' or ``Rule'') as part of the FTC...; and (3) a list of fourteen major systems of a used motor vehicle and the major defects that may...

  9. 77 FR 74745 - Used Motor Vehicle Trade Regulation Rule

    Science.gov (United States)

    2012-12-17

    ... December 17, 2012 Part II Federal Trade Commission 16 CFR Part 455 Used Motor Vehicle Trade Regulation Rule...; ] FEDERAL TRADE COMMISSION 16 CFR Part 455 Used Motor Vehicle Trade Regulation Rule AGENCY: Federal Trade... Motor Vehicle Trade Regulation Rule (``Used Car Rule'' or ``Rule'') as part of the FTC's...

  10. 40 CFR 52.244 - Motor vehicle emissions budgets.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Motor vehicle emissions budgets. 52.244... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS California § 52.244 Motor vehicle emissions budgets. (a) Approval of the motor vehicle emissions budgets for the following ozone rate-of-progress...

  11. 40 CFR 79.32 - Motor vehicle gasoline.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Motor vehicle gasoline. 79.32 Section...) REGISTRATION OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.32 Motor vehicle gasoline. (a) The following fuels commonly or commercially known or sold as motor vehicle gasoline are...

  12. 76 FR 12221 - Petition for Exemption From the Federal Motor Vehicle Motor Theft Prevention Standard; Toyota

    Science.gov (United States)

    2011-03-04

    ... National Highway Traffic Safety Administration Petition for Exemption From the Federal Motor Vehicle Motor... of Toyota Motor North America, Inc's., (Toyota) petition for an exemption of the Corolla vehicle line... equipment is likely to be as effective in reducing and deterring motor vehicle theft as compliance with...

  13. 77 FR 29752 - Petition for Exemption From the Federal Motor Vehicle Motor Theft Prevention Standard; Jaguar...

    Science.gov (United States)

    2012-05-18

    ... Petition for Exemption From the Federal Motor Vehicle Motor Theft Prevention Standard; Jaguar Land Rover... is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of the Federal Motor Vehicle Theft Prevention Standard, 49 CFR part...

  14. Electric machine for hybrid motor vehicle

    Science.gov (United States)

    Hsu, John Sheungchun

    2007-09-18

    A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet rotor, an uncluttered rotor spaced from the permanent magnet rotor, and at least one secondary core assembly. The power system also has a gearing arrangement for coupling the internal combustion engine to wheels on the vehicle thereby providing a means for the electric machine to both power assist and brake in relation to the output of the internal combustion engine.

  15. Motor Vehicle Crash Deaths PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2016-07-06

    This 60 second public service announcement is based on the July 2016 CDC Vital Signs report. In the U.S., about 90 people die in motor vehicle crashes each day and thousands more are injured, resulting in hundreds of millions of dollars in direct medical costs each year. Learn what you can do to stay safe.  Created: 7/6/2016 by National Center for Injury Prevention and Control (NCIPC).   Date Released: 7/6/2016.

  16. Kinetic energy recovery systems in motor vehicles

    Science.gov (United States)

    Śliwiński, C.

    2016-09-01

    The article draws attention to the increasing environmental pollution caused by the development of vehicle transport and motorization. Different types of design solutions used in vehicles for the reduction of fuel consumption, and thereby emission of toxic gasses into the atmosphere, were specified. Historical design solutions concerning energy recovery devices in mechanical vehicles which used flywheels to accumulate kinetic energy were shown. Developmental tendencies in the area of vehicle manufacturing in the form of hybrid electric and electric devices were discussed. Furthermore, designs of energy recovery devices with electrical energy storage from the vehicle braking and shock absorbing systems were presented. A mechanical energy storing device using a flywheel operating under vacuum was presented, as were advantages and disadvantages of both systems, the limitations they impose on individual constructions and safety issues. The paper also discusses a design concept of an energy recovery device in mechanical vehicles which uses torsion springs as the main components of energy accumulation during braking. The desirability of a cooperation of both the mechanical- and electrical energy recovery devices was indicated.

  17. ATVs: motorized toys or vehicles for children?

    Science.gov (United States)

    Yanchar, N L; Kennedy, R; Russell, C

    2006-02-01

    To compare the nature of injuries from all-terrain vehicles (ATVs) to those from bicycling, dirtbikes/motocross, and motor vehicle crashes. Data on injuries from the mechanisms outlined above were obtained through CHIRPP (the Canadian Hospitals Injury Reporting and Prevention Program) and hospital records. A Canadian tertiary pediatric center. Cases presenting to the emergency department over a 10 year period. Comparison between demographics, mechanisms and natures of injuries sustained, disposition from the emergency department, and lengths of hospital stay. Contrary to bicycling, ATV related injuries occurred among older ages and appeared to result less often from loss of control. Severe injuries resulting in deep soft tissue trauma and fracture/dislocations were 1.7 and 1.5 times, respectively, more frequent among ATV trauma than bicycling (p<0.01). In addition, ATV related injuries were located more frequently in the trunkal, hip, lower extremity, and spinal regions. Conversely, ATV related trauma bore significant similarities regarding body part and nature of the injury to both motor vehicle crash (MVC) and dirtbike related injuries. Akin to dirtbike and MVC related trauma, ATV related injuries more frequently required admission to the ward or intensive care unit compared to bicycling injuries (30.8% v 9.6%, p<0.0001), and used a proportionally larger amount of hospital resources with respect to overall in-hospital and intensive care unit days. Although ATVs may be considered recreational for children, their associated injury patterns, severity, and costs to the healthcare system more closely resemble those from motorized vehicles and are more significant than bicycling. Strict policy to reflect this must be developed and acknowledged by the public, industry, and legislative bodies.

  18. 40 CFR 52.2311 - Motor vehicle antitampering.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Motor vehicle antitampering. 52.2311... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Texas § 52.2311 Motor vehicle... Emissions from Motor Vehicles” and 114.5 “Exclusions and Exceptions” on February 24, 1989, and September...

  19. 48 CFR 945.570-2 - Acquisition of motor vehicles.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Acquisition of motor... Acquisition of motor vehicles. (a) The GSA Interagency Fleet Management System (GSA-IFMS) is the first source of supply for providing motor vehicles to contractors; however, contracting officer approval...

  20. 78 FR 3081 - Petition for Exemption From the Federal Motor Vehicle Motor Theft Prevention Standard; Toyota

    Science.gov (United States)

    2013-01-15

    ... National Highway Traffic Safety Administration Petition for Exemption From the Federal Motor Vehicle Motor... Transportation (DOT). ACTION: Grant of petition for exemption. SUMMARY: This document grants in full Toyota Motor... to be as effective in reducing and deterring motor vehicle theft as compliance with the...

  1. 76 FR 12220 - Petition for Exemption From the Federal Motor Vehicle Motor Theft Prevention Standard; Jaguar...

    Science.gov (United States)

    2011-03-04

    ... National Highway Traffic Safety Administration Petition for Exemption From the Federal Motor Vehicle Motor... on the line as standard equipment is likely to be as effective in reducing and deterring motor... deterring motor vehicle theft as compliance with ] the parts-marking requirements of the Theft...

  2. Quinone emissions from gasoline and diesel motor vehicles.

    Science.gov (United States)

    Jakober, Chris A; Riddle, Sarah G; Robert, Michael A; Destaillats, Hugo; Charles, M Judith; Green, Peter G; Kleeman, Michael J

    2007-07-01

    Gas- and particle-phase emissions from gasoline and diesel vehicles operated on chassis dynamometers were collected using annular denuders, quartz filters, and PUF substrates. Quinone species were measured using O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine derivatization in conjunction with gas chromatography-mass spectrometry and high-performance liquid chromatography-mass spectrometry. Nine quinones were observed, ranging from C6 to C16. New species identified in motor vehicle exhaust include methyl-1,4-benzoquinone, 2-methyl-1,4-naphthoquinone (MNQN), and aceanthrenequinone. Gas-phase motor vehicle emissions of quinones are also reported for the first time. Six gas-phase quinones were quantified with emission rates of 2-28 000 microg L(-1) fuel consumed. The most abundant gas-phase quinones were 1,4-benzoquinone (BON) and MNQN. The gas-phase fraction was > or = 69% of quinone mass for light-duty gasoline emissions, and > or = 84% for heavy-duty diesel emissions. Eight particle-phase quinones were observed between 2 and 1600 microg L(-1), with BQN the most abundant species followed by 9,10-phenanthrenequinone and 1,2-naphthoquinone. Current particle-phase quinone measurements agree well with the few available previous results. Further research is needed concerning the gas-particle partitioning behavior of quinones in ambient and combustion source conditions.

  3. 78 FR 2236 - Federal Motor Vehicle Safety Standards; New Pneumatic Tires for Motor Vehicles With a GVWR of...

    Science.gov (United States)

    2013-01-10

    ... Standards; New Pneumatic Tires for Motor Vehicles With a GVWR of More Than 4,536 Kilograms (10,000 Pounds... Standard (FMVSS) No. 119, New pneumatic tires for motor vehicles with a gross vehicle weight rating (GVWR... first issued in 1973 until it was inadvertently omitted in 2003. The breaking energy requirement...

  4. Tribal motor vehicle injury prevention programs for reducing disparities in motor vehicle-related injuries.

    Science.gov (United States)

    West, Bethany A; Naumann, Rebecca B

    2014-04-18

    A previous analysis of National Vital Statistics System data for 2003-2007 that examined disparities in rates of motor vehicle-related death by race/ethnicity and sex found that death rates for American Indians/Alaska Natives were two to four times the rates of other races/ethnicities. To address the disparity in motor vehicle-related injuries and deaths among American Indians/Alaska Natives, CDC funded four American Indian tribes during 2004-2009 to tailor, implement, and evaluate evidence-based road safety interventions. During the implementation of these four motor vehicle-related injury prevention pilot programs, seat belt and child safety seat use increased and alcohol-impaired driving decreased. Four American Indian/Alaska Native tribal communities-the Tohono O'odham Nation, the Ho-Chunk Nation, the White Mountain Apache Tribe, and the San Carlos Apache Tribe-implemented evidence-based road safety interventions to reduce motor vehicle-related injuries and deaths. Each community selected interventions from the Guide to Community Preventive Services and implemented them during 2004-2009. Furthermore, each community took a multifaceted approach by incorporating several strategies, such as school and community education programs, media campaigns, and collaborations with law enforcement officers into their programs. Police data and direct observational surveys were the main data sources used to assess results of the programs. Results included increased use of seat belts and child safety seats, increased enforcement of alcohol-impaired driving laws, and decreased motor vehicle crashes involving injuries or deaths. CDC's Office of Minority Health and Health Equity selected the intervention analysis and discussion as an example of a program that might be effective for reducing motor vehicle-related injury disparities in the United States. The Guide to Community Preventive Services recognizes these selected interventions as effective; this report examines the

  5. Contributions to motor vehicle emissions analysis

    Science.gov (United States)

    Pokharel, Sajal Sharma

    While motor vehicles are a major source of atmospheric pollutants, their in-use emissions remain inadequately characterized. Remote sensing devices (RSD) have been shown to be efficient tools for measuring CO, HC and NO in on-road vehicle exhaust. This work utilizes RSD data to illuminate new phenomena related to automobile emissions. Model year averaged RSD data are shown to correlate extremely well with IM240 measurements. IM240 is a loaded-mode dynamometer test used by several states as part of their emissions reduction strategy. The high degree of correlation helps to validate remote sensing as an instrument for IM240 evaluation. Such evaluations of programs in Chicago and Denver indicate an Inspection and Maintenance benefit of less than 10%. Fleet average on-road emissions have continually decreased over several years of measurement at the same locations in four U.S. cities: Chicago, Denver, Los Angeles and Phoenix. Together with the decrease in overall emissions, the distribution has become even more skewed. Fewer automobiles are responsible for a larger fraction of the decreasing total pollutant emissions. Analysis of the newest model year vehicles year after year at the four locations indicates that successive model years have become lower emitting. It is believed that more stringent government mandated emission standards and continuous improvement in the ability of automobile manufacturers to meet these standards is responsible for the emissions reductions. Comparison of emissions among the four cities, adjusted for load and model year, indicates that older vehicles in the Los Angeles area have higher CO and lower NO emissions. The fact that California had more stringent NO emission standards and more lenient CO ones compared to the rest of the states suggests, once again, the significant benefits of emission standards and new vehicle emission control technology.

  6. 78 FR 44112 - California State Motor Vehicle Pollution Control Standards; Urban Buses; Request for Waiver of...

    Science.gov (United States)

    2013-07-23

    ... AGENCY California State Motor Vehicle Pollution Control Standards; Urban Buses; Request for Waiver of... for emission standards and related test procedures contained in its urban bus regulations as they affect the 2002 and later model years. Urban buses are conventionally powered by a heavy-duty...

  7. Mortality among hourly motor vehicle manufacturing workers.

    Science.gov (United States)

    Delzell, Elizabeth; Brown, David A; Matthews, Robert

    2003-08-01

    We evaluated mortality among 198,245 motor vehicle industry workers during the period of 1973 to 1995. Workers' mortality rates were lower than expected overall (40,131 observed/43,859 expected deaths, standardized mortality ratio [SMR] = 92, CI = 91-92) and for all major cause of death categories except cancer (SMR = 100, CI = 98-102). Mortality rates were higher than expected for lung cancer overall (SMR = 110, CI = 107-113) and among employees in transmission/gear manufacturing (SMR = 121, CI = 112-130), casting operations (SMR = 122, CI = 110-135), engine manufacturing (SMR = 111, CI = 101-123), and vehicle assembly (SMR = 111, CI = 105-117); for stomach cancer in engine manufacturing (SMR = 147, CI = 110-192); and for prostate cancer in casting operations (SMR = 128, CI = 102-158). Excesses of lung cancer in transmission, vehicle assembly, and casting operations and of stomach cancer in engine manufacturing have been observed in other investigations. Further information on employees' occupational exposures and personal attributes is required to clarify the interpretation of these results.

  8. DOE Project on Heavy Vehicle Aerodynamic Drag

    Energy Technology Data Exchange (ETDEWEB)

    McCallen, R; Salari, K; Ortega, J; Castellucci, P; Pointer, D; Browand, F; Ross, J; Storms, B

    2007-01-04

    Class 8 tractor-trailers consume 11-12% of the total US petroleum use. At highway speeds, 65% of the energy expenditure for a Class 8 truck is in overcoming aerodynamic drag. The project objective is to improve fuel economy of Class 8 tractor-trailers by providing guidance on methods of reducing drag by at least 25%. A 25% reduction in drag would present a 12% improvement in fuel economy at highway speeds, equivalent to about 130 midsize tanker ships per year. Specific goals include: (1) Provide guidance to industry in the reduction of aerodynamic drag of heavy truck vehicles; (2) Develop innovative drag reducing concepts that are operationally and economically sound; and (3) Establish a database of experimental, computational, and conceptual design information, and demonstrate the potential of new drag-reduction devices. The studies described herein provide a demonstration of the applicability of the experience developed in the analysis of the standard configuration of the Generic Conventional Model. The modeling practices and procedures developed in prior efforts have been applied directly to the assessment of new configurations including a variety of geometric modifications and add-on devices. Application to the low-drag 'GTS' configuration of the GCM has confirmed that the error in predicted drag coefficients increases as the relative contribution of the base drag resulting from the vehicle wake to the total drag increases and it is recommended that more advanced turbulence modeling strategies be applied under those circumstances. Application to a commercially-developed boat tail device has confirmed that this restriction does not apply to geometries where the relative contribution of the base drag to the total drag is reduced by modifying the geometry in that region. Application to a modified GCM geometry with an open grille and radiator has confirmed that the underbody flow, while important for underhood cooling, has little impact on the drag

  9. 40 CFR 85.1715 - Aircraft meeting the definition of motor vehicle.

    Science.gov (United States)

    2010-07-01

    ... motor vehicle. 85.1715 Section 85.1715 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Motor Vehicles and Motor Vehicle Engines § 85.1715 Aircraft meeting the definition of motor vehicle. This section applies for aircraft meeting the definition of motor vehicle in § 85.1703. (a) For...

  10. 77 FR 9916 - California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Mobile Cargo...

    Science.gov (United States)

    2012-02-21

    ... AGENCY California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Mobile Cargo... to the control of emissions from new motor vehicles or new motor vehicle engines ] EPA is, pursuant... standards relating to the control of emissions for new motor vehicles and new motor vehicle engines...

  11. 77 FR 53199 - California State Motor Vehicle Pollution Control Standards; Advanced Clean Car Program; Request...

    Science.gov (United States)

    2012-08-31

    ... AGENCY California State Motor Vehicle Pollution Control Standards; Advanced Clean Car Program; Request... control of emissions from new motor vehicles or new motor vehicle engines subject to this part. No state... crankcase emission standards) for the control of emissions from new motor vehicles or new motor vehicle...

  12. 41 CFR 109-38.5105 - Motor vehicle local use objectives.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Motor vehicle local use..., TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.51-Utilization of Motor Equipment § 109-38.5105 Motor vehicle local use objectives. (a) Individual motor vehicle utilization cannot always...

  13. 78 FR 55137 - Federal Motor Vehicle Safety Standards; Ejection Mitigation

    Science.gov (United States)

    2013-09-09

    ... Part 571 Federal Motor Vehicle Safety Standards; Ejection Mitigation; Final Rule #0;#0;Federal Register... TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AL40 Federal Motor Vehicle... document responds to petitions for reconsideration of a 2011 final rule that established Federal...

  14. 78 FR 10573 - Used Motor Vehicle Trade Regulation Rule

    Science.gov (United States)

    2013-02-14

    ... From the Federal Register Online via the Government Publishing Office ] FEDERAL TRADE COMMISSION 16 CFR Part 455 Used Motor Vehicle Trade Regulation Rule AGENCY: Federal Trade Commission. ACTION... Used Motor Vehicle Trade Regulation Rule (``Used Car Rule'' or ``Rule''). The notice stated...

  15. 77 FR 54836 - Federal Motor Vehicle Safety Standards

    Science.gov (United States)

    2012-09-06

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards CFR...; New pneumatic tires for motor vehicles with a GVWR of more than 4,536 kilograms (10,000 pounds)...

  16. 78 FR 2797 - Federal Motor Vehicle Safety Standards; Minimum Sound Requirements for Hybrid and Electric Vehicles

    Science.gov (United States)

    2013-01-14

    ...As required by the Pedestrian Safety Enhancement Act (PSEA) of 2010 this rule proposes to establish a Federal motor vehicle safety standard (FMVSS) setting minimum sound requirements for hybrid and electric vehicles. This new standard would require hybrid and electric passenger cars, light trucks and vans (LTVs), medium and heavy duty, trucks, and buses, low speed vehicles (LSVs), and motorcycles to produce sounds meeting the requirements of this standard. This proposed standard applies to electric vehicles (EVs) and to those hybrid vehicles (HVs) that are capable of propulsion in any forward or reverse gear without the vehicle's internal combustion engine (ICE) operating. This standard would ensure that blind, visually-impaired, and other pedestrians are able to detect and recognize nearby hybrid and electric vehicles, as required by the PSEA, by requiring that hybrid and electric vehicles emit sound that pedestrians would be able to hear in a range of ambient environments and contain acoustic signal content that pedestrians will recognize as being emitted from a vehicle. The benefit of reducing the pedestrian injury rate per registered vehicle of HVs to ICE vehicles when 4.1% of the fleet is HV and EV would be 2790 fewer pedestrian and pedalcyclist injuries. We also estimate that this proposal will result in 10 fewer pedestrian and pedalcyclist injuries caused by LSVs. Thus, 2800 total injured pedestrians are expected to be avoided due to this proposal representing 35 equivalent lives saved. We do not estimate any quantifiable benefits for EVs because it is our view that EV manufacturers would have installed alert sounds in their cars without passage of the PSEA and this proposed rule. Comparison of costs and benefits expected due to this rule provides a cost of $0.83 to $0.99 million per equivalent life saved across the 3 and 7 percent discount levels for the light EV and HV and LSV fleet. According to our present model, a countermeasure that allows a vehicle

  17. 49 CFR 178.347 - Specification DOT 407; cargo tank motor vehicle.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Specification DOT 407; cargo tank motor vehicle... SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.347 Specification DOT 407; cargo tank motor vehicle....

  18. 49 CFR 178.346 - Specification DOT 406; cargo tank motor vehicle.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Specification DOT 406; cargo tank motor vehicle... SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.346 Specification DOT 406; cargo tank motor vehicle....

  19. 49 CFR 178.348 - Specification DOT 412; cargo tank motor vehicle.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Specification DOT 412; cargo tank motor vehicle... SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.348 Specification DOT 412; cargo tank motor vehicle....

  20. Selective detection and characterization of nanoparticles from motor vehicles.

    Science.gov (United States)

    Johnston, Murray V; Klems, Joseph P; Zordan, Christopher A; Pennington, M Ross; Smith, James N

    2013-02-01

    distribution of emissions from individual vehicles, we correlated camera images with the spike contribution to particle number concentration at each time point. A small percentage of motor vehicles were found to emit a disproportionally large concentration of nanoparticles, and these high emitters included both spark-ignition (SI) and heavy-duty diesel (HDD) vehicles. In addition to characterizing the contribution of the spikes (local sources) to the ambient number concentration, we developed a method to determine the net contribution of motor vehicles (all sources) to the total mass concentration of ambient nanoparticles. To do this, we correlated the concentration of spikes with measurements of fast changes in the chemical composition of nanoparticles measured with the nano aerosol mass spectrometer (NAMS; built by the Johnston group). The NAMS irradiates individual, size-selected nanoparticles with a high-energy laser pulse to generate a mass spectrum consisting of multiply charged atomic ions. The elemental composition of each particle was determined from the ion signal intensities of each element. However, overlapping mass-to-charge ratios (m/z) at 4 m/z (O(+4) and C(+3)) and at 8 m/z (O(+2) and S(+4)) needed to be separated into their component ions to obtain a representative composition. To do this, we developed a method to deconvolute these ion signals using sucrose and ammonium sulfate [(NH4)2SO4] as calibration standards. With this approach, the differences between the expected and measured elemental mole fractions of carbon (C), oxygen (O), nitrogen (N), and sulfur (S) for a variety of test particles were generally much less than 10%. Ambient nanoparticles were found to consist mostly of C, O, N, and S. Many particles also contained silicon (Si). The elemental compositions were apportioned into molecular species that are commonly found in ambient aerosol: sulfate (SO4(2-)), nitrate (NO3-), ammonium (NH4+), carbonaceous matter, and when present, silicon dioxide (SiO2

  1. Clean Cities Guide to Alternative Fuel and Advanced Medium- and Heavy-Duty Vehicles (Book)

    Energy Technology Data Exchange (ETDEWEB)

    2013-08-01

    Today's fleets are increasingly interested in medium-duty and heavy-duty vehicles that use alternative fuels or advanced technologies that can help reduce operating costs, meet emissions requirements, improve fleet sustainability, and support U.S. energy independence. Vehicle and engine manufacturers are responding to this interest with a wide range of options across a steadily growing number of vehicle applications. This guide provides an overview of alternative fuel power systems?including engines, microturbines, electric motors, and fuel cells?and hybrid propulsion systems. The guide also offers a list of individual medium- and heavy-duty vehicle models listed by application, along with associated manufacturer contact information, fuel type(s), power source(s), and related information.

  2. Clean Cities Guide to Alternative Fuel and Advanced Medium- and Heavy-Duty Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-08-01

    Today's fleets are increasingly interested in medium-duty and heavy-duty vehicles that use alternative fuels or advanced technologies that can help reduce operating costs, meet emissions requirements, improve fleet sustainability, and support U.S. energy independence. Vehicle and engine manufacturers are responding to this interest with a wide range of options across a steadily growing number of vehicle applications. This guide provides an overview of alternative fuel power systems--including engines, microturbines, electric motors, and fuel cells--and hybrid propulsion systems. The guide also offers a list of individual medium- and heavy-duty vehicle models listed by application, along with associated manufacturer contact information, fuel type(s), power source(s), and related information.

  3. 49 CFR 383.91 - Commercial motor vehicle groups.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Commercial motor vehicle groups. 383.91 Section 383.91 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS...

  4. 49 CFR 398.4 - Driving of motor vehicles.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Driving of motor vehicles. 398.4 Section 398.4 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS TRANSPORTATION OF...

  5. Exposure to motor vehicle emissions: An intake fraction approach

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, Julian D. [Univ. of California, Berkeley, CA (United States)

    2002-05-22

    Motor vehicles are a significant source of population exposure to air pollution. Focusing on California's South Coast Air Basin as a case study, the author combines ambient monitoring station data with hourly time-activity patterns to determine the population intake of motor vehicle emissions during 1996-1999. Three microenvironments are considered wherein the exposure to motor vehicle emissions is higher than in ambient air: in and near vehicles, inside a building that is near a freeway, and inside a residence with an attached garage. Total motor vehicle emissions are taken from the EMFAC model. The 15 million people in the South Coast inhale 0.0048% of primary, nonreactive compounds emitted into the basin by motor vehicles. Intake of motor vehicle emissions is 46% higher than the average ambient concentration times the average breathing rate, because of microenvironments and because of temporal and spatial correlation among breathing rates, concentrations, and population densities. Intake fraction (iF) summarizes the emissions-to-intake relationship as the ratio of population intake to total emissions. iF is a population level exposure metric that incorporates spatial, temporal, and interindividual variability in exposures. iFs can facilitate the calculation of population exposures by distilling complex emissions-transport-receptor relationships. The author demonstrates this point by predicting the population intake of various primary gaseous emissions from motor vehicles, based on the intake fraction for benzene and carbon monoxide.

  6. Exposure to motor vehicle emissions: An intake fraction approach

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, Julian D.

    2002-05-01

    Motor vehicles are a significant source of population exposure to air pollution. Focusing on California's South Coast Air Basin as a case study, the author combines ambient monitoring station data with hourly time-activity patterns to determine the population intake of motor vehicle emissions during 1996-1999. Three microenvironments are considered wherein the exposure to motor vehicle emissions is higher than in ambient air: in and near vehicles, inside a building that is near a freeway, and inside a residence with an attached garage. Total motor vehicle emissions are taken from the EMFAC model. The 15 million people in the South Coast inhale 0.0048% of primary, nonreactive compounds emitted into the basin by motor vehicles. Intake of motor vehicle emissions is 46% higher than the average ambient concentration times the average breathing rate, because of microenvironments and because of temporal and spatial correlation among breathing rates, concentrations, and population densities. Intake fraction (iF) summarizes the emissions-to-intake relationship as the ratio of population intake to total emissions. iF is a population level exposure metric that incorporates spatial, temporal, and interindividual variability in exposures. iFs can facilitate the calculation of population exposures by distilling complex emissions-transport-receptor relationships. The author demonstrates this point by predicting the population intake of various primary gaseous emissions from motor vehicles, based on the intake fraction for benzene and carbon monoxide.

  7. 77 FR 4396 - Petition for Exemption From the Federal Motor Vehicle Motor Theft Prevention Standard; Toyota

    Science.gov (United States)

    2012-01-27

    ... National Highway Traffic Safety Administration Petition for Exemption From the Federal Motor Vehicle Motor... full the petition of Toyota Motor North America, Inc's., (Toyota) petition for an exemption of the... the line as standard equipment is likely to be as effective in reducing and deterring motor...

  8. Assessing the roll stability of heavy vehicles in South Africa

    CSIR Research Space (South Africa)

    Benade, R

    2016-07-01

    Full Text Available . The simplified tool as described by the New Zealand Land Transport Rule was identified as the most viable technique to potentially regulate the roll stability of heavy vehicles in South Africa....

  9. Standardisation of heavy vehicle crash investigation procedures in South Africa

    CSIR Research Space (South Africa)

    Dube, S

    2015-07-01

    Full Text Available it is recommended that standardisation in the training of the responsible investigating officials and proper definition of responsible officials for heavy vehicle accident investigations (SAPS officers, Metro police officers and traffic police officers...

  10. A high performance pneumatic braking system for heavy vehicles

    Science.gov (United States)

    Miller, Jonathan I.; Cebon, David

    2010-12-01

    Current research into reducing actuator delays in pneumatic brake systems is opening the door for advanced anti-lock braking algorithms to be used on heavy goods vehicles. However, these algorithms require the knowledge of variables that are impractical to measure directly. This paper introduces a sliding mode braking force observer to support a sliding mode controller for air-braked heavy vehicles. The performance of the observer is examined through simulations and field testing of an articulated heavy vehicle. The observer operated robustly during single-wheel vehicle simulations, and provided reasonable estimates of surface friction from test data. The effect of brake gain errors on the controller and observer are illustrated, and a recursive least squares estimator is derived for the brake gain. The estimator converged within 0.3 s in simulations and vehicle trials.

  11. 41 CFR 109-38.301-1.53 - Responsibilities of motor vehicle operators.

    Science.gov (United States)

    2010-07-01

    ... motor vehicle operators. 109-38.301-1.53 Section 109-38.301-1.53 Public Contracts and Property... MANAGEMENT REGULATIONS AVIATION, TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.3-Official Use of Government Motor Vehicles § 109-38.301-1.53 Responsibilities of motor vehicle...

  12. 49 CFR 567.4 - Requirements for manufacturers of motor vehicles.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Requirements for manufacturers of motor vehicles... manufacturers of motor vehicles. (a) Each manufacturer of motor vehicles (except vehicles manufactured in two or... applicable Federal motor vehicle safety, bumper, and theft prevention standards in effect on the date...

  13. Epidemiology of Child Motor Vehicle Crash Injuries and Fatalities

    Science.gov (United States)

    Arbogast, Kristy B.; Durbin, Dennis R.

    Although children represent only 10-15 % of the overall traffic fatality burden in the United States, motor vehicle crashes (MVCs) remain the leading cause of death and disability for children and young adults; and, close to half of all unintentional injury deaths to children and adolescents (Centers for Disease Control and Prevention National Center for Injury Prevention and Control, Web-based Injury Statistics Query and Reporting System [CDC NCIPC WISQARS] 2010). Moreover, their exposure to motor vehicle risk is significant because they travel by motor vehicles nearly as much as adults. Prevention of the fatalities, injuries and disability associated with MVC must be a priority for ensuring our children's overall health.

  14. Preliminary Design of Reluctance Motors for Light Electric Vehicles Driving

    Directory of Open Access Journals (Sweden)

    TRIFA, V.

    2009-02-01

    Full Text Available The paper presents the aspects regarding FEM analysis of a reluctant motor for direct driving of the light electric vehicles. The reluctant motor take into study is of special construction suitable for direct drive of a light electric vehicle. It is an inverse radial reluctant motor, with a fixed stator mounted on front wheel shaft and an external toothed rotor fixed on the front wheel itself. A short presentation of preliminary design is continued with the FEM analysis in order to provide the optimal geometry of the motor and adequate windings.

  15. Calculation of ground vibration spectra from heavy military vehicles

    Science.gov (United States)

    Krylov, V. V.; Pickup, S.; McNuff, J.

    2010-07-01

    The demand for reliable autonomous systems capable to detect and identify heavy military vehicles becomes an important issue for UN peacekeeping forces in the current delicate political climate. A promising method of detection and identification is the one using the information extracted from ground vibration spectra generated by heavy military vehicles, often termed as their seismic signatures. This paper presents the results of the theoretical investigation of ground vibration spectra generated by heavy military vehicles, such as tanks and armed personnel carriers. A simple quarter car model is considered to identify the resulting dynamic forces applied from a vehicle to the ground. Then the obtained analytical expressions for vehicle dynamic forces are used for calculations of generated ground vibrations, predominantly Rayleigh surface waves, using Green's function method. A comparison of the obtained theoretical results with the published experimental data shows that analytical techniques based on the simplified quarter car vehicle model are capable of producing ground vibration spectra of heavy military vehicles that reproduce basic properties of experimental spectra.

  16. 40 CFR 80.522 - May used motor oil be dispensed into diesel motor vehicles or nonroad diesel engines?

    Science.gov (United States)

    2010-07-01

    ... diesel motor vehicles or nonroad diesel engines? 80.522 Section 80.522 Protection of Environment... Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Motor Vehicle Diesel Fuel Standards and Requirements § 80.522 May used motor oil be dispensed into diesel...

  17. US Forest Service Motor Vehicle Use Map: Roads and Trails

    Data.gov (United States)

    US Forest Service, Department of Agriculture — A map service on the www depicting Forest Service roads and trails that are designated for motor vehicle use under the official U.S. Government Code of Federal...

  18. New Energy Vehicles Standardjzation Practice of DONGFENG MOTOR

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    1.Introduction Ministry of Finance (MOF) and Ministry of Science and Technology (MOST) have jointly issued several policies concerning new energy vehicles since 2009,such as "Circular on Energy Saving and New Energy Vehicle Model operation and Promotion","Circular on the Promotion of Energy Saving and New Energy Vehicle in Public service Areas ","Circular on the Subsidy for IndividualsPurchasing New Energy Vehicles ","Circular on Releasing 'Regulations of Promotion of Energy Saving Vehicles (Passenger Vehicles under 1.6 L) in the Energy Saving Products People-Benefit Project' ",etc.,to encourage the development and production of new energy vehicle enterprises by means of fiscal and tax measures.Currently,DONGFENG MOTOR's new energy vehicles such as S30,EQ6420PFN1,DFL160MAK,etc.,have entered the energy saving vehicle promotion list of national "Energy Saving Products People-Benefit Project".

  19. Demonstration of Heavy Hybrid Diesel Fleet Vehicles

    Science.gov (United States)

    2016-03-01

    losses due to uneven pavement , and representative of most installations. • Track Weather Station: ATC setup equipment to measure and record weather...the conventional utility truck provide a better, more rigid ride. Acceleration of the vehicle is very poor. The vehicles continuously fall behind

  20. Medium- and Heavy-Duty Vehicle Field Evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, Kenneth J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Prohaska, Robert S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-11

    This presentation provides information about NREL's real-world evaluations of commercial vehicle technologies, which compare the performance of advanced medium- and heavy-duty fleet vehicles to conventional vehicles. NREL conducts these customized evaluations in partnership with commercial and government fleets across the nation. Current fleet and industry partners include UPS, Workhorse, Parker Hannifin, Proterra, Foothill Transit, Long Beach Transit, BYD, Odyne, Duke Energy, Miami-Dade, TransPower, Eaton, Cummins, Bosch, and Clean Cities/National Clean Fleet Partnership. The presentation focuses on two particular vehicle evaluation projects -- hydraulic hybrid refuse haulers operated by Miami-Dade and electric transit buses operated by Foothill Transit.

  1. 26 CFR 41.4482(a)-1 - Definition of highway motor vehicle.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Definition of highway motor vehicle. 41.4482(a... (CONTINUED) MISCELLANEOUS EXCISE TAXES EXCISE TAX ON USE OF CERTAIN HIGHWAY MOTOR VEHICLES Tax on Use of Certain Highway Motor Vehicles § 41.4482(a)-1 Definition of highway motor vehicle. (a) Highway...

  2. 75 FR 15621 - Federal Motor Vehicle Safety Standards; Theft Protection and Rollaway Prevention

    Science.gov (United States)

    2010-03-30

    ... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AK38 Federal Motor Vehicle Safety... Federal Motor Vehicle Safety Standard No. 114 that certain motor vehicles with an automatic transmission..., or ``Act'') was signed into law.\\1\\ This Act relates to several aspects of motor vehicle...

  3. 41 CFR 101-39.204 - Obtaining motor vehicles for indefinite assignment.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Obtaining motor vehicles..., TRANSPORTATION, AND MOTOR VEHICLES 39-INTERAGENCY FLEET MANAGEMENT SYSTEMS 39.2-GSA Interagency Fleet Management System Services § 101-39.204 Obtaining motor vehicles for indefinite assignment. Motor vehicles...

  4. 77 FR 9239 - California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Truck Idling...

    Science.gov (United States)

    2012-02-16

    ... AGENCY California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Truck Idling... relating to the control of emissions from new motor vehicles or new motor vehicle engines subject to this... standards (other than crankcase emission standards) for the control of emissions from new motor vehicles or...

  5. 75 FR 11878 - California State Motor Vehicle Pollution Control Standards; Amendments to the California Zero...

    Science.gov (United States)

    2010-03-12

    ... AGENCY California State Motor Vehicle Pollution Control Standards; Amendments to the California Zero... certification, inspection or any other approval relating to the control of emissions from any new motor vehicle... standards) for the control of emissions from new motor vehicles or new motor vehicle engines prior to March...

  6. 75 FR 43975 - California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Truck Idling...

    Science.gov (United States)

    2010-07-27

    ... AGENCY California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Truck Idling... certification, inspection or any other approval relating to the control of emissions from any new motor vehicle... standards) for the control of emissions from new motor vehicles or new motor vehicle engines prior to March...

  7. Alternating-Current Motor Drive for Electric Vehicles

    Science.gov (United States)

    Krauthamer, S.; Rippel, W. E.

    1982-01-01

    New electric drive controls speed of a polyphase as motor by varying frequency of inverter output. Closed-loop current-sensing circuit automatically adjusts frequency of voltage-controlled oscillator that controls inverter frequency, to limit starting and accelerating surges. Efficient inverter and ac motor would give electric vehicles extra miles per battery charge.

  8. Motor Vehicle Safety (A Cup of Health with CDC)

    Centers for Disease Control (CDC) Podcasts

    2014-10-16

    In our highly mobile society, travel in vehicles is an almost daily occurrence for most Americans. Every trip places us at risk for serious injury. In this podcast, Dr. Gwen discusses ways to avoid serious injuries in motor vehicles.  Created: 10/16/2014 by MMWR.   Date Released: 10/16/2014.

  9. 41 CFR 109-38.903-50 - Reporting DOE motor vehicle data.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Reporting DOE motor... AVIATION, TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.9-Federal Motor Vehicle Fleet Report § 109-38.903-50 Reporting DOE motor vehicle data. (a) DOE offices and designated...

  10. Heavy Vehicle Crash Characteristics in Oman; 2009–2011

    Directory of Open Access Journals (Sweden)

    Islam Al-Bulushi

    2015-05-01

    Full Text Available In recent years, Oman has seen a shift in the burden of diseases towards road accidents. The main objective of this paper, therefore, is to describe key characteristics of heavy vehicle crashes in Oman and identify the key driving behaviours that influence fatality risks. Crash data from January 2009 to December 2011 were examined and it was found that, of the 22,543 traffic accidents that occurred within this timeframe, 3,114 involved heavy vehicles. While the majority of these crashes were attributed to driver behaviours, a small proportion was attributed to other factors. The results of the study indicate that there is a need for a more thorough crash investigation process in Oman. Future research should explore the reporting processes used by the Royal Oman Police, cultural influences on heavy vehicle operations in Oman and improvements to the current licensing system.

  11. Mathematical Modeling of the Three Phase Induction Motor Couple to DC Motor in Hybrid Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Zulkarnain Lubis

    2009-01-01

    Full Text Available Problem statement: With emphasis on a cleaner environment and efficient operation, vehicles today rely more and more heavily on electrical power generation for success. Approach: Mathematical modeling the components of the HEV as the three phase induction motor couple to DC motor in hybrid electric vehicle was introduced. The controller of Induction Motor (IM was designed based on input-output feedback linearization technique. It allowed greater electrical generation capacity and the fuel economy and emissions benefits of hybrid electric automotive propulsion. Results: A typical series hybrid electric vehicle was modeled and investigated. Conclusion: Various tests, such as acceleration traversing ramp and fuel consumption and emission were performed on the proposed model of 3 phase induction motor coupler DC motor in electric hybrid vehicles drive.

  12. Marginal abatement cost curves for Heavy Duty Vehicles. Background report

    Energy Technology Data Exchange (ETDEWEB)

    Schroten, A.; Warringa, G.; Bles, M.

    2012-09-15

    Cost curves were calculated for CO2 abatement technologies for Heavy Duty Vehicles. These curves were elaborated for eight different vehicle categories (six categories of truck and two subcategories), as well as for an 'average' truck and bus. Given that cost curves depend very much on underlying assumptions, the MACH model (Marginal Abatement Costs of Heavy duty vehicles) was developed. This model allows users to enter their own assumptions with respect to parameters like fuel prices and cost and lifetime of individual technologies, with the model then generating new cost curves for the various vehicle categories. This background report contains a description of the model and a summary of the results of several model runs.

  13. Road user charges for heavy goods vehicles (HGV)

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou

    In this report, the European Environment Agency (EEA) presents updated estimates of the external costs of air pollution for different categories of heavy goods vehicles (HGVs). This report on road transport is a continuation of previous reporting from EEA on estimates for the external costs of ai...... pollution from industrial facilities (EEA, 2011).......In this report, the European Environment Agency (EEA) presents updated estimates of the external costs of air pollution for different categories of heavy goods vehicles (HGVs). This report on road transport is a continuation of previous reporting from EEA on estimates for the external costs of air...

  14. Large Scale Composite Manufacturing for Heavy Lift Launch Vehicles

    Science.gov (United States)

    Stavana, Jacob; Cohen, Leslie J.; Houseal, Keth; Pelham, Larry; Lort, Richard; Zimmerman, Thomas; Sutter, James; Western, Mike; Harper, Robert; Stuart, Michael

    2012-01-01

    Risk reduction for the large scale composite manufacturing is an important goal to produce light weight components for heavy lift launch vehicles. NASA and an industry team successfully employed a building block approach using low-cost Automated Tape Layup (ATL) of autoclave and Out-of-Autoclave (OoA) prepregs. Several large, curved sandwich panels were fabricated at HITCO Carbon Composites. The aluminum honeycomb core sandwich panels are segments of a 1/16th arc from a 10 meter cylindrical barrel. Lessons learned highlight the manufacturing challenges required to produce light weight composite structures such as fairings for heavy lift launch vehicles.

  15. Heavy Lift Vehicle (HLV) Avionics Flight Computing Architecture Study

    Science.gov (United States)

    Hodson, Robert F.; Chen, Yuan; Morgan, Dwayne R.; Butler, A. Marc; Sdhuh, Joseph M.; Petelle, Jennifer K.; Gwaltney, David A.; Coe, Lisa D.; Koelbl, Terry G.; Nguyen, Hai D.

    2011-01-01

    A NASA multi-Center study team was assembled from LaRC, MSFC, KSC, JSC and WFF to examine potential flight computing architectures for a Heavy Lift Vehicle (HLV) to better understand avionics drivers. The study examined Design Reference Missions (DRMs) and vehicle requirements that could impact the vehicles avionics. The study considered multiple self-checking and voting architectural variants and examined reliability, fault-tolerance, mass, power, and redundancy management impacts. Furthermore, a goal of the study was to develop the skills and tools needed to rapidly assess additional architectures should requirements or assumptions change.

  16. Heavy Vehicles on Minor Highway Bridges

    DEFF Research Database (Denmark)

    Nielsen, Søren R. K.; Kirkegaard, Poul Henning; Enevoldsen, I.

    The present paper worked out as a part of a research project on "Dynamic amplification factor of vehicle loadings on smaller bridges" establishes a two-dimensional spectral description of the road roughness surface based on measurements from a Danish road using so-called Profilograph used by Danish...... to the bridge and the stochastic nature of the surface roughness are included into the model....

  17. Electronically commutated dc motors for electric vehicles

    Science.gov (United States)

    Maslowski, E. A.

    1981-01-01

    A motor development program to explore the feasibility of electronically commutated dc motors (also known as brushless) for electric cars is described. Two different design concepts and a number of design variations based on these concepts are discussed. One design concept is based on a permanent magnet, medium speed, machine rated at 7000 to 9000 rpm, and powered via a transistor inverter power conditioner. The other concept is based on a permanent magnet, high speed, machine rated at 22,000 to 26,000 rpm, and powered via a thyristor inverter power conditioner. Test results are presented for a medium speed motor and a high speed motor each of which have been fabricated using samarium cobalt permanent magnet material.

  18. Road user charges for heavy goods vehicles (HGV)

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou

    In this report, the European Environment Agency (EEA) presents updated estimates of the external costs of air pollution for different categories of heavy goods vehicles (HGVs). This report on road transport is a continuation of previous reporting from EEA on estimates for the external costs of air...

  19. Liquid Propellant Blast Yields for Delta IV Heavy Vehicles

    Science.gov (United States)

    2010-07-01

    exterior shells shown in a layered construction. Unfortunately, the 3D model is too computationally intensive to run on a PC, and may even be too large to...Research Triangle Institute, Cocoa Beach, FL, 30 July 2004. LIQUID PROPELLANT BLAST YIELDS FOR DELTA IV HEAVY VEHICLES Ron R. Lambert ACTA Lompoc, CA

  20. Fuel cell vehicles at general motors

    Energy Technology Data Exchange (ETDEWEB)

    Helmolt, R. von [GM Fuel Cell Activities, Adam Opel AG, IPC 81-90, D-65423 Ruesselsheim (Germany)

    2004-12-01

    An overview of GM/Opel's hydrogen fuel cell vehicles is presented. Three vehicle generations have been put into operation within the past four years, and valuable practical experience has been gained. GM/Opel's development targets are today shifting from pure performance optimisation to more varied aims, including reliability and durability considerations. Increased attention is also being paid to the fuel storage factor, which is a major issue for hydrogen cars. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

  1. 41 CFR 109-38.204-50 - Records of exempted motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... motor vehicles. 109-38.204-50 Section 109-38.204-50 Public Contracts and Property Management Federal... AVIATION, TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.2-Registration, Identification, and Exemptions § 109-38.204-50 Records of exempted motor vehicles. The Director, Office...

  2. 76 FR 34693 - California State Motor Vehicle Pollution Control Standards; Within-the-Scope Determination for...

    Science.gov (United States)

    2011-06-14

    ... AGENCY California State Motor Vehicle Pollution Control Standards; Within-the-Scope Determination for... or attempt to enforce any standard relating to the control of emissions from new motor vehicles or... any other approval relating to the control of emissions from any new motor vehicle or new motor...

  3. 76 FR 61095 - California State Motor Vehicle Pollution Control Standards; Within the Scope Determination and...

    Science.gov (United States)

    2011-10-03

    ... AGENCY California State Motor Vehicle Pollution Control Standards; Within the Scope Determination and... certification, inspection or any other approval relating to the control of emissions from any new motor vehicle...) for the control of emissions from new motor vehicles or new motor engines prior to March 30, 1966,\\9...

  4. 75 FR 22532 - Federal Motor Vehicle Safety Standards; Cargo Carrying Capacity

    Science.gov (United States)

    2010-04-29

    ... National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards... for reconsideration of a final rule published December 4, 2007 which amended the Federal motor vehicle... problem of light vehicle, motor home and recreation vehicle trailer overloading by requiring...

  5. 76 FR 21035 - General Motors Vehicle Manufacturing, Formerly Known as General Motors Corporation, Shreveport...

    Science.gov (United States)

    2011-04-14

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration General Motors Vehicle Manufacturing, Formerly Known as General Motors Corporation, Shreveport Assembly Plant, Including On-Site Leased Workers From Aerotek, Kelly Services and Voith Industrial Services, Inc., Formerly...

  6. 77 FR 6587 - General Motors Vehicle Manufacturing, Formerly Known as General Motors Corporation, Shreveport...

    Science.gov (United States)

    2012-02-08

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration General Motors Vehicle Manufacturing, Formerly Known as General Motors Corporation, Shreveport Assembly Plant, Including On-Site Leased Workers From Aerotek, Kelly Services and Voith Industrial Services, Inc., Formerly...

  7. "Bait vehicle" technologies and motor vehicle theft along the southwest border.

    Energy Technology Data Exchange (ETDEWEB)

    Aldridge, Chris D.

    2007-09-01

    In 2005, over 33% of all the vehicles reported stolen in the United States occurred in the four southwestern border states of California, Arizona, New Mexico, and Texas, which all have very high vehicle theft rates in comparison to the national average. This report describes the utilization of 'bait vehicles' and associated technologies in the context of motor vehicle theft along the southwest border of the U.S. More than 100 bait vehicles are estimated to be in use by individual agencies and auto theft task forces in the southwestern border states. The communications, tracking, mapping, and remote control technologies associated with bait vehicles provide law enforcement with an effective tool to obtain arrests in vehicle theft 'hot spots'. Recorded audio and video from inside the vehicle expedite judicial proceedings as offenders rarely contest the evidence presented. At the same time, law enforcement is very interested in upgrading bait vehicle technology through the use of live streaming video for enhanced officer safety and improved situational awareness. Bait vehicle effectiveness could be enhanced by dynamic analysis of motor theft trends through exploitation of geospatial, timeline, and other analytical tools to better inform very near-term operational decisions, including the selection of particular vehicle types. This 'information-led' capability would especially benefit from more precise and timely information on the location of vehicles stolen in the United States and found in Mexico. Introducing Automated License Plate Reading (ALPR) technology to collect information associated with stolen motor vehicles driven into Mexico could enhance bait vehicle effectiveness.

  8. Possibilities of Using Hydrogen as Motor Vehicle Fuel

    Directory of Open Access Journals (Sweden)

    Zdravko Bukljaš

    2005-03-01

    Full Text Available Hydrogen is the fuel of the future, since it is the element ofwater (H20 whichsun·ounds us and the resources of which areunlimited. First water is divided into hydrogen and oxygen. Thepaper presents the laboratory and industrial methods of obtain·ing hydrogen, types of fuel cells for various purposes, hydrogen-propelled motor vehicles, as well as advantages and drawbacksof hydrogen used as fuel under the conditions that haveto be met in order to use it as propulsion energy for motor vehicles.

  9. Steering Control of Wheeled Armored Vehicle with Brushless DC Motor

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Considering the steering characters of one type of wheeled armored vehicle, a brushless direct current (DC) motor is adapted as the actuator for steering control. After investigating the known algorithms, one kind of algorithm, which combines the fuzzy logic control with the self-adapting PID control and the startup and pre-brake control, is put forward. Then a test-bed is constructed, and an experiment is conducted. The result of experiment confirms the validity of this algorithm in steering control of wheeled armored vehicle with brushless DC motor.

  10. Motor Integrated Permanent Magnet Gear in a Battery Electrical Vehicle

    DEFF Research Database (Denmark)

    Frandsen, Tommy; Mathe, Laszlo; Berg, Nick Ilsø

    2015-01-01

    This paper presents the physical construction and test results of two new demonstrators of a Motor Integrated Permanent Magnet Gear (MIPMG), which is a second version of an already tested demonstrator. The demonstrators will be used as traction units for a Battery Electrical Vehicle (BEV) and the......This paper presents the physical construction and test results of two new demonstrators of a Motor Integrated Permanent Magnet Gear (MIPMG), which is a second version of an already tested demonstrator. The demonstrators will be used as traction units for a Battery Electrical Vehicle (BEV...

  11. Wheelchair rider risk in motor vehicles: a technical note.

    Science.gov (United States)

    Shaw, G

    2000-01-01

    A better understanding of the risk involved in riding different sizes and types of motor vehicles is required to make informed decisions regarding a reasonable level of protection for wheelchair riders. Wheelchair rider accident information that can be used to estimate risk is quite limited. This paper reviewed the resources available, including the National Electronic Injury Surveillance System database. Motor vehicle accident data for the general public were analyzed in order to better characterize wheelchair rider risk. Using the National Safety Council annual transportation mode fatality rates and the (inverse) relationship of vehicle mass and occupant fatality rate, fatality rates for vehicles that transport wheelchair riders (minivans, vans, paratransit vans, and small and large buses) were estimated. Despite the large margins of error that must be assumed for accident data and the conclusions drawn from it, the available information suggests that 1) the majority of wheelchair rider injuries could be prevented by providing protection for abrupt vehicle maneuvers; 2) the type, size, and mass of the vehicle have a substantial effect on the fatality rate, although this effect decreases for heavier (<3,000 kg) vehicles; and 3) wheelchair riders who cannot properly use tiedown and occupant restraint systems or who are frail would face a lower risk of injury if transported in larger vehicles.

  12. 41 CFR 102-34.305 - What forms do we use to transfer ownership when selling a motor vehicle?

    Science.gov (United States)

    2010-07-01

    ..., farm machinery, and certain military-design motor vehicles and motor vehicles that are damaged beyond... transfer ownership when selling a motor vehicle? 102-34.305 Section 102-34.305 Public Contracts and... REGULATION PERSONAL PROPERTY 34-MOTOR VEHICLE MANAGEMENT Disposal of Motor Vehicles § 102-34.305 What...

  13. Motor vehicle insurance rating with pseudo emissions coverage

    Energy Technology Data Exchange (ETDEWEB)

    Hickson, Allister [University of Manitoba Transport Instititute, Winnipeg (Canada)

    2006-06-10

    There is general agreement amongst economists and ecologists that transportation is an important contributor to greenhouse gas emissions. Typical proposals to reduce the demand for transportation, and consequently emissions, focus on imposing a fuel tax or a direct fee on vehicles. This paper outlines the method and advantages of treating the environmental risk as additional pseudo coverage rated under existing property and liability motor vehicle insurance systems. (author)

  14. Brainstem injury in motor vehicle crashes.

    Science.gov (United States)

    Viano, David C; Parenteau, Chantal S

    2017-10-03

    This is a descriptive study of the frequency and risk for brainstem injury by crash type, belt use, and crash severity (delta-V). NASS-CDS electronic cases were reviewed to see whether the transition from vehicles without advanced airbags and seat belts and side airbags and curtains to vehicles with the safety technologies has influenced the risk for brainstem injury. 1994-2013 NASS-CDS was analyzed to determine the number of brainstem injuries in nonejected adults (15+ years old) in vehicle crashes. Crashes were grouped by front, side, rear, and rollover. The effect of belt use was investigated. Light vehicles were included with model year (MY) 1994+. Occupants with severe head injury (Abbreviated Injury Scale [AIS] 4+) and Maximum Abbreviated Injury Scale (MAIS) 4+F injury were also determined. The risk for injury with standard errors was determined using the MAIS 0+F exposure by belt use and crash type. NASS-CDS electronic cases were studied with brainstem injury in 2001-2013 MY vehicles. NASS-CDS indicates there are 872 ± 133 cases of brainstem injury per year. About 16.0% of AIS 4+ head injury involves the brainstem. For belted occupants, the highest risk for brainstem injury was in side impacts at 0.065 ± 0.010%. In contrast, the highest risk for brainstem injury was 0.310 ± 0.291% in rear impacts and 0.310 ± 0.170% in rollovers for unbelted occupants. The risk for brainstem injury increased with crash severity. The highest risk for brainstem injury was 3.54 ± 1.45% in crashes with >72 km/h (>45 mph) delta-V. Exponential functions fit the change in risk with delta-V. Eighteen NASS-CDS electronic cases showed that brainstem injury occurred in very severe collisions where the occupant experienced multiple injuries from intrusion or impact on vehicle structures stiffened by deformation. The risk for brainstem injury in belted occupants has remained essentially constant over 20 years, whereas the risk for MAIS 4+F injury has declined 38.3%. The prevention

  15. Global time trends in PAH emissions from motor vehicles

    Science.gov (United States)

    Shen, Huizhong; Tao, Shu; Wang, Rong; Wang, Bin; Shen, Guofeng; Li, Wei; Su, Shenshen; Huang, Ye; Wang, Xilong; Liu, Wenxin; Li, Bengang; Sun, Kang

    2011-04-01

    Emission from motor vehicles is the most important source of polycyclic aromatic hydrocarbons (PAHs) in urban areas. Emission factors of individual PAHs for motor vehicles reported in the literature varied 4 to 5 orders of magnitude, leading to high uncertainty in emission inventory. In this study, key factors affecting emission factors of PAHs (EF PAH) for motor vehicles were evaluated quantitatively based on thousands of EF PAH measured in 16 countries for over 50 years. The result was used to develop a global emission inventory of PAHs from motor vehicles. It was found that country and vehicle model year are the most important factors affecting EF PAH, which can be quantified using a monovariate regression model with per capita gross domestic production (purchasing power parity) as a sole independent variable. On average, 29% of variation in log-transformed EF PAH could be explained by the model, which was equivalent to 90% reduction in overall uncertainty on arithmetic scale. The model was used to predict EF PAH and subsequently PAH emissions from motor vehicles for various countries in the world during a period from 1971 to 2030. It was estimated that the global emission reached its peak value of approximate 101 Gg in 1978 and decreased afterwards due to emission control in developed countries. The annual emission picked up again since 1990 owing to accelerated energy consumption in China and other developing countries. With more and more rigid control measures taken in the developing world, global emission of PAHs is currently passing its second peak. It was predicted that the emission would decrease from 77 Gg in 2010 to 42 Gg in 2030.

  16. Dynamic Performance of Subway Vehicle with Linear Induction Motor System

    Science.gov (United States)

    Wu, Pingbo; Luo, Ren; Hu, Yan; Zeng, Jing

    The light rail vehicle with Linear Induction Motor (LIM) bogie, which is a new type of urban rail traffic tool, has the advantages of low costs, wide applicability, low noise, simple maintenance and better dynamic behavior. This kind of vehicle, supported and guided by the wheel and rail, is not driven by the wheel/rail adhesion force, but driven by the electromagnetic force between LIM and reaction plate. In this paper, three different types of suspensions and their characteristic are discussed with considering the interactions both between wheel and rail and between LIM and reaction plate. A nonlinear mathematical model of the vehicle with LIM bogie is set up by using the software SIMPACK, and the electromechanical model is also set up on Simulink roof. Then the running behavior of the LIM vehicle is simulated, and the influence of suspension on the vehicle dynamic performance is investigated.

  17. assessment of capacity building needs among motor vehicle ...

    African Journals Online (AJOL)

    user

    theory and practice of motor vehicle mechanics should imbibe continuous .... society because they represent focal points where ... argued that the technology gap should not be defined narrowly as a ..... Journal of Library Archives and Information Science. Vol.17 (2) ... www.aaicar.com, making sense of engine sensors ...

  18. Motor vehicle fuel economy, the forgotten HC control stragegy?

    Energy Technology Data Exchange (ETDEWEB)

    Deluchi, M.; Wang, Quanlu; Greene, D.L.

    1992-06-01

    Emissions of hydrocarbons from motor vehicles are recognized as major contributors to ozone pollution in urban areas. Petroleum-based motor fuels contain volatile organic compounds (VOC) which, together with oxides of nitrogen, promote the formation of ozone in the troposphere via complex photochemical reactions. VOC emissions from the tailpipe and evaporation from the fuel and engine systems of highway vehicles are believed to account for about 40% of total VOC emissions in any region. But motor fuels also generate emissions throughout the fuel cycle, from crude oil production to refining, storage, transportation, and handling, that can make significant contributions to the total inventory of VOC emissions. Many of these sources of emissions are directly related to the quantity of fuel produced and handled throughout the fuel cycle. It is, therefore, reasonable to expect that a reduction in total fuel throughput might result in a reduction of VOC emissions. In particular, reducing vehicle fuel consumption by increasing vehicle fuel economy should reduce total fuel throughput, thereby cutting total emissions of VOCS. In this report we identify the sources of VOC emissions throughout the motor fuel cycle, quantify them to the extent possible, and describe their dependence on automobile and light truck fuel economy.

  19. Psychoactive substance use and the risk of motor vehicle accidents

    NARCIS (Netherlands)

    Movig, K.L.; Mathijssen, M.P.; Nagel, P.H.; van Egmond, T.; de Gier, J.J.; Leufkens, H.G.; Egberts, A.C.

    2004-01-01

    The driving performance is easily impaired as a consequence of the use of alcohol and/or licit and illicit drugs. However, the role of drugs other than alcohol in motor vehicle accidents has not been well established. The objective of this study was to estimate the association between psychoactive d

  20. Motor Vehicle Safety (A Minute of Health with CDC)

    Centers for Disease Control (CDC) Podcasts

    2014-10-16

    Motor vehicle crashes are among the leading causes of injury in the U.S. This podcast discusses the importance of being sober and buckled up during ever automobile trip.  Created: 10/16/2014 by MMWR.   Date Released: 10/16/2014.

  1. Particulate Air Pollution from Motor Vehicles: A Putative Proallergic Hazard?

    Directory of Open Access Journals (Sweden)

    Riccardo Polosa

    1999-01-01

    Full Text Available Air pollution generated from motor vehicle exhaust has become a major cause for scientific and public concern worldwide over recent years. The rapid and marked increase in the motor vehicle traffic and its associated emissions in urban areas have paralleled a sharp increase in the prevalence of allergic diseases such as asthma and rhinitis. Epidemiological studies have demonstrated a strong association between people living in close proximity to roads with high traffic density and increased allergic symptoms, reduced lung function and increased sensitization to common aeroallergens. Several laboratory-based studies have demonstrated that pollutants emitted from motor vehicles can induce allergic inflammation and increase airway hyperresponsiveness, which may provide an underlying mechanism for the increasing prevalence of allergic diseases. Although the detrimental effects of air pollution on human health have been brought to public attention, it appears that less attention has been given to the potential role of road traffic fumes in the induction of the allergic state. Legislators should consider pollutants emitted from motor vehicle exhausts as a potential pro-allergic hazard, before making important changes in environmental policy.

  2. 76 FR 76622 - Federal Management Regulation; Motor Vehicle Management

    Science.gov (United States)

    2011-12-08

    ... Change 2011-03; FMR Case 2011-102-2; Docket 2011-0011; Sequence 2] RIN 3090-AJ14 Federal Management Regulation; Motor Vehicle Management AGENCY: Office of Governmentwide Policy, (GSA). ACTION: Final rule. SUMMARY: The General Services Administration is amending the Federal Management Regulation (FMR)...

  3. 76 FR 31545 - Federal Management Regulation; Motor Vehicle Management

    Science.gov (United States)

    2011-06-01

    ... ADMINISTRATION 41 CFR Part 102-34 RIN 3090-AJ14 Federal Management Regulation; Motor Vehicle Management AGENCY...: The General Services Administration is proposing to amend the Federal Management Regulation (FMR) by....C. 553(a)(2) because it applies to agency management. However, this proposed rule is being...

  4. Neck sprain after motor vehicle accidents in drivers and passengers

    NARCIS (Netherlands)

    Versteegen, GJ; Kingma, J; Meijler, WJ; ten Duis, HJ

    2000-01-01

    Neck sprain is a general term denoting a soft tissue injury of the neck, which seldom causes major disability but is considered a modem epidemic. The purpose of the present study was to determine the prevalence of sprain of the neck injury due to motor vehicle accidents (MVAs) in both drivers and pa

  5. CDC Vital Signs: Motor Vehicle Crash Injuries: Costly but Preventable

    Science.gov (United States)

    ... crashes, and how to prevent future crashes. Problem Motor vehicle crashes are a leading cause of injury in the US—harmful and expensive. What works to prevent crash injuries? Using primary enforcement seat belt laws that cover everyone in the car. A primary enforcement law means a police officer ...

  6. Concussion in Motor Vehicle Accidents: The Concussion Identification Index

    Science.gov (United States)

    2016-08-03

    Motor Vehicle Accidents; TBI (Traumatic Brain Injury); Brain Contusion; Brain Injuries; Cortical Contusion; Concussion Mild; Cerebral Concussion; Brain Concussion; Accidents, Traffic; Traffic Accidents; Traumatic Brain Injury With Brief Loss of Consciousness; Traumatic Brain Injury With no Loss of Consciousness; Traumatic Brain Injury With Loss of Consciousness

  7. Market Innovation in the Transport and Heavy Vehicle Market

    DEFF Research Database (Denmark)

    Borgström, Benedikte; Agndal, Henrik; Cui, Lianguang

    The purpose is to better understand the interrelatedness of new business models in the truck market and developments in the road transport sector. Based on a three year research project in cooperation with a European heavy vehicle manufacturer, we describe short cases showing some of the business...... models in use and demonstrate changes and the relations between the markets trucking and transport. New business models emerge both in the heavy vehicle and transportation markets, in complex ways involving multiple actors. The impetus for the models can come from several directions but the final impact...... must be negotiated and cannot be planned by a single actor. The paper considers the development of new business models and implications on the market from the point of view of the firms actually using the business models. This shows how different business models can co-exist and involve different types...

  8. Market Innovation in the Transport and Heavy Vehicle Market

    DEFF Research Database (Denmark)

    Borgström, Benedikte; Agndal, Henrik; Cui, Lianguang;

    The purpose is to better understand the interrelatedness of new business models in the truck market and developments in the road transport sector. Based on a three year research project in cooperation with a European heavy vehicle manufacturer, we describe short cases showing some of the business...... models in use and demonstrate changes and the relations between the markets trucking and transport. New business models emerge both in the heavy vehicle and transportation markets, in complex ways involving multiple actors. The impetus for the models can come from several directions but the final impact...... must be negotiated and cannot be planned by a single actor. The paper considers the development of new business models and implications on the market from the point of view of the firms actually using the business models. This shows how different business models can co-exist and involve different types...

  9. Medium and Heavy Duty Vehicle Field Evaluations (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Walkowicz, K.

    2014-06-01

    This presentation discusses field evaluations of medium- and heavy-duty vehicles performed by NREL. The project provides medium-duty (MD) and heavy-duty (HD) test results, aggregated data, and detailed analysis, including 3rd party unbiased data (data that would not normally be shared by industry in an aggregated and detailed manner). Over 5.6 million miles of advanced technology MD and HD truck data have been collected, documented, and analyzed on over 240 different vehicles since 2002. Data, analysis, and reports are shared within DOE, national laboratory partners, and industry for R&D planning and strategy. The results help guide R&D for new technology development, help define intelligent usage of newly developed technology, and help fleets/users understand all aspects of advanced technology.

  10. 41 CFR 109-26.501 - Purchase of new motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Purchase of new motor vehicles. 109-26.501 Section 109-26.501 Public Contracts and Property Management Federal Property... motor vehicles....

  11. A lightweight electronically commutated dc motor for electric passenger vehicles

    Science.gov (United States)

    Echolds, E. F.; Walla, P. S.

    1982-09-01

    A functional model breadboard converter and a rare-earth-cobalt, permanent magnet motor; as well as an engineering model converter and PM motor suitable for vehicle installations were developed and tested. The converter and motor achieved an 88% peak efficiency, a maximum output of 26 kW at 26,000 rpm, and a continuous rating of 15 kW. The system also generated power to the source during braking, with a demonstrated peak power available at the converter terminals of approximately 26 kW at 88% efficiency. Major conclusions include: (1) the SAE J227a(D) driving cycle efficiency for the converter/motor is 86% to 88% when energy available for recovery at the converter terminals is included; (2) the converter initial cost is approximately five times that of the permanent magnet motor, but can be reduced by means of LSI logic and integrated liquid cooled semiconductor packages; and (3) an electronically commutated motor with a liquid cooled converter will operate reliably without service or maintenance for the life of a passenger vehicle.

  12. A lightweight electronically commutated dc motor for electric passenger vehicles

    Science.gov (United States)

    Echolds, E. F.; Walla, P. S.

    1982-01-01

    A functional model breadboard converter and a rare-earth-cobalt, permanent magnet motor; as well as an engineering model converter and PM motor suitable for vehicle installations were developed and tested. The converter and motor achieved an 88% peak efficiency, a maximum output of 26 kW at 26,000 rpm, and a continuous rating of 15 kW. The system also generated power to the source during braking, with a demonstrated peak power available at the converter terminals of approximately 26 kW at 88% efficiency. Major conclusions include: (1) the SAE J227a(D) driving cycle efficiency for the converter/motor is 86% to 88% when energy available for recovery at the converter terminals is included; (2) the converter initial cost is approximately five times that of the permanent magnet motor, but can be reduced by means of LSI logic and integrated liquid cooled semiconductor packages; and (3) an electronically commutated motor with a liquid cooled converter will operate reliably without service or maintenance for the life of a passenger vehicle.

  13. HEAVY DUTY DIESEL VEHICLE LOAD ESTIMATION: DEVELOPMENT OF VEHICLE ACTIVITY OPTIMIZATION ALGORITHM

    Science.gov (United States)

    The Heavy-Duty Vehicle Modal Emission Model (HDDV-MEM) developed by the Georgia Institute of Technology(Georgia Tech) has a capability to model link-specific second-by-second emissions using speed/accleration matrices. To estimate emissions, engine power demand calculated usin...

  14. 49 CFR 583.10 - Outside suppliers of passenger motor vehicle equipment.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Outside suppliers of passenger motor vehicle... CONTENT LABELING § 583.10 Outside suppliers of passenger motor vehicle equipment. (a) For each unique type of passenger motor vehicle equipment for which a manufacturer or allied supplier requests...

  15. 75 FR 15620 - Federal Motor Vehicle Safety Standards; Air Brake Systems

    Science.gov (United States)

    2010-03-30

    ... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AK62 Federal Motor Vehicle Safety... that amended the Federal motor vehicle safety standard for air brake systems by requiring substantial... 37122) amending Federal Motor Vehicle Safety Standard (FMVSS) No. 121, Air Brake Systems, to...

  16. 22 CFR 151.8 - Evidence of insurance for motor vehicles.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Evidence of insurance for motor vehicles. 151.8... LIABILITY INSURANCE FOR DIPLOMATIC MISSIONS AND PERSONNEL § 151.8 Evidence of insurance for motor vehicles... insurance throughout the period of registration on all motor vehicles owned or leased or otherwise...

  17. 75 FR 50958 - Federal Motor Vehicle Safety Standards; Motorcoach Definition; Occupant Crash Protection

    Science.gov (United States)

    2010-08-18

    ... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AK56 Federal Motor Vehicle Safety... Action Plan, NHTSA is issuing this NPRM to propose to amend the Federal motor vehicle safety standard... crash must involve a motor vehicle traveling on a traffic way customarily open to the public, and...

  18. 49 CFR 583.11 - Allied suppliers of passenger motor vehicle equipment.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Allied suppliers of passenger motor vehicle... CONTENT LABELING § 583.11 Allied suppliers of passenger motor vehicle equipment. (a) For each unique type of passenger motor vehicle equipment which an allied supplier supplies to the manufacturer with...

  19. 40 CFR 52.1159 - Enhanced Motor Vehicle Inspection and Maintenance.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Enhanced Motor Vehicle Inspection and... Enhanced Motor Vehicle Inspection and Maintenance. (a) Revisions submitted by the Massachusetts Department of Environmental Protection on October 20, 2000, to the motor vehicle inspection and...

  20. 78 FR 15920 - Federal Motor Vehicle Safety Standards; Tire Selection and Rims

    Science.gov (United States)

    2013-03-13

    ... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AL24 Federal Motor Vehicle Safety... to amend Federal Motor Vehicle Safety Standard (FMVSS) No. 110 to make it clear that special trailer... two revisions are appropriate and would not result in any degradation of motor vehicle safety....

  1. 49 CFR 565.14 - Motor vehicles imported into the United States.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Motor vehicles imported into the United States...) REQUIREMENTS VIN Requirements § 565.14 Motor vehicles imported into the United States. (a) Importers shall utilize the VIN assigned by the original manufacturer of the motor vehicle. (b) All passenger...

  2. 78 FR 9623 - Federal Motor Vehicle Safety Standards; Air Brake Systems

    Science.gov (United States)

    2013-02-11

    ... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AL11 Federal Motor Vehicle Safety... published a final rule that amended the Federal motor vehicle safety standard for air brake systems by... published a final rule in the Federal Register amending Federal Motor Vehicle Safety Standard (FMVSS)...

  3. 76 FR 44829 - Federal Motor Vehicle Safety Standards; Air Brake Systems

    Science.gov (United States)

    2011-07-27

    ... Administration 49 CFR Part 571 [Docket No. NHTSA-2009-0175] RIN 2127-AK84 Federal Motor Vehicle Safety Standards... published a final rule that amended the Federal motor vehicle safety standard for air brake systems by... Federal Motor Vehicle Safety Standard (FMVSS) No. 121, Air Brake Systems, to require improved...

  4. 36 CFR 5.4 - Commercial passenger-carrying motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... motor vehicles. 5.4 Section 5.4 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR COMMERCIAL AND PRIVATE OPERATIONS § 5.4 Commercial passenger-carrying motor vehicles. (a) The commercial transportation of passengers by motor vehicles except as authorized under a contract...

  5. 41 CFR 101-26.501 - Purchase of new motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Purchase of new motor... SOURCES AND PROGRAM 26.5-GSA Procurement Programs § 101-26.501 Purchase of new motor vehicles. (a) It shall be the policy to procure commercially available motor vehicles, unless other vehicles...

  6. 36 CFR 13.1316 - Commercial transport of passengers by motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... passengers by motor vehicles. 13.1316 Section 13.1316 Parks, Forests, and Public Property NATIONAL PARK... National Park General Provisions § 13.1316 Commercial transport of passengers by motor vehicles. Commercial transport of passengers by motor vehicles on Exit Glacier Road is allowed without a written permit....

  7. 19 CFR 10.310 - Election to average for motor vehicles.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Election to average for motor vehicles. 10.310... Free Trade Agreement § 10.310 Election to average for motor vehicles. (a) Election. In determining whether a motor vehicle is originating for purposes of the preferences under the Agreement or a...

  8. 49 CFR 565.24 - Motor vehicles imported into the United States.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Motor vehicles imported into the United States...) REQUIREMENTS Alternative VIN Requirements In Effect for Limited Period § 565.24 Motor vehicles imported into... motor vehicle. (b) A passenger car certified by a Registered Importer under 49 CFR part 592 shall have...

  9. 40 CFR 80.596 - How is a refinery motor vehicle diesel fuel volume baseline calculated?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false How is a refinery motor vehicle diesel... Requirements § 80.596 How is a refinery motor vehicle diesel fuel volume baseline calculated? (a) For purposes of this subpart, a refinery's motor vehicle diesel fuel volume baseline is calculated using...

  10. 40 CFR 80.532 - How are motor vehicle diesel fuel credits used and transferred?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false How are motor vehicle diesel fuel... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Motor Vehicle Diesel....532 How are motor vehicle diesel fuel credits used and transferred? (a) Credit use stipulations....

  11. 40 CFR 80.531 - How are motor vehicle diesel fuel credits generated?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false How are motor vehicle diesel fuel... (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Motor Vehicle Diesel Fuel... are motor vehicle diesel fuel credits generated? (a) Generation of credits from June 1, 2006...

  12. 76 FR 78 - Federal Motor Vehicle Safety Standard; Engine Control Module Speed Limiter Device

    Science.gov (United States)

    2011-01-03

    ... posted speed limit of 55 mph that was in effect in 1991. \\2\\ Comercial Motor Vehicle Speed Control... improved truck designs. \\3\\ Comercial Motor Vehicle Speed Control Devices (1991), DOT HS 807 725. TCA... National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standard...

  13. 40 CFR 80.24 - Controls applicable to motor vehicle manufacturers.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Controls applicable to motor vehicle... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Controls and Prohibitions § 80.24 Controls applicable to motor vehicle manufacturers. (a) (b) The manufacturer of any motor vehicle equipped with an...

  14. 49 CFR 178.320 - General requirements applicable to all DOT specification cargo tank motor vehicles.

    Science.gov (United States)

    2010-10-01

    ...) Each cargo tank or cargo tank motor vehicle design type, including its required accident damage... specification cargo tank motor vehicles. 178.320 Section 178.320 Transportation Other Regulations Relating to... Transportation § 178.320 General requirements applicable to all DOT specification cargo tank motor vehicles....

  15. 76 FR 14014 - Public Roundtables: Protecting Consumers in the Sale and Leasing of Motor Vehicles

    Science.gov (United States)

    2011-03-15

    ... Public Roundtables: Protecting Consumers in the Sale and Leasing of Motor Vehicles AGENCY: Federal Trade... pertaining to motor vehicle sales and leasing, the FTC is hosting a series of public roundtables in 2011. The... interested parties to discuss consumer protection issues in connection with motor vehicle sales and...

  16. 14 CFR 1204.1600 - Issuance of motor vehicle for home-to-work.

    Science.gov (United States)

    2010-01-01

    ... ADMINISTRATIVE AUTHORITY AND POLICY Temporary Duty Travel-Issuance of Motor Vehicle for Home-to-Work... travel is authorized to travel by Government motor vehicle and the official authorizing the travel determines that there will be a significant savings in time, a Government motor vehicle may be issued at...

  17. The speed of change : motor vehicles and people in Africa, 1890-2000

    NARCIS (Netherlands)

    Gewald, J.B.; Luning, Sabine; Walraven, van K.

    2009-01-01

    In the early 1900s the motor-vehicle (car, bus, lorry or motorcycle) was introduced in sub-Saharan Africa. Initially the plaything and symbol of colonial domination, the motor-vehicle transformed the economic and social life of the continent. Indeed, the motor-vehicle is arguably the single most imp

  18. 41 CFR 102-34.50 - What size motor vehicles may we obtain?

    Science.gov (United States)

    2010-07-01

    ... MANAGEMENT Obtaining Fuel Efficient Motor Vehicles § 102-34.50 What size motor vehicles may we obtain? (a... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What size motor vehicles may we obtain? 102-34.50 Section 102-34.50 Public Contracts and Property Management Federal...

  19. 41 CFR 102-34.300 - How do we dispose of a domestic fleet motor vehicle?

    Science.gov (United States)

    2010-07-01

    ... domestic fleet motor vehicle? 102-34.300 Section 102-34.300 Public Contracts and Property Management... fleet motor vehicle? After meeting the replacement standards under subpart E of this part, you may dispose of a Government-owned domestic fleet motor vehicle. Detailed instructions for the transfer of...

  20. 76 FR 8736 - Status of Motor Vehicle Budgets in Submitted State Implementation Plan for Transportation...

    Science.gov (United States)

    2011-02-15

    ... AGENCY Status of Motor Vehicle Budgets in Submitted State Implementation Plan for Transportation Conformity Purposes; Connecticut; Notice of Withdrawal of Adequacy of Motor Vehicle Emissions Budgets AGENCY... public that EPA has withdrawn its previous adequacy finding on the 2012 motor vehicle emission...

  1. 76 FR 7204 - Status of Motor Vehicle Budgets in Submitted State Implementation Plan for Transportation...

    Science.gov (United States)

    2011-02-09

    ... AGENCY Status of Motor Vehicle Budgets in Submitted State Implementation Plan for Transportation... Adequacy of Motor Vehicle Emissions Budget AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of... the 2010 particulate matter of ten microns or less (PM-10) motor vehicle emission budget (MVEB)...

  2. Life-threatening motor vehicle crashes in bright sunlight.

    Science.gov (United States)

    Redelmeier, Donald A; Raza, Sheharyar

    2017-01-01

    Bright sunlight may create visual illusions that lead to driver error, including fallible distance judgment from aerial perspective. We tested whether the risk of a life-threatening motor vehicle crash was increased when driving in bright sunlight.This longitudinal, case-only, paired-comparison analysis evaluated patients hospitalized because of a motor vehicle crash between January 1, 1995 and December 31, 2014. The relative risk of a crash associated with bright sunlight was estimated by evaluating the prevailing weather at the time and place of the crash compared with the weather at the same hour and location on control days a week earlier and a week later.The majority of patients (n = 6962) were injured during daylight hours and bright sunlight was the most common weather condition at the time and place of the crash. The risk of a life-threatening crash was 16% higher during bright sunlight than normal weather (95% confidence interval: 9-24, P vehicle crash. An awareness of this risk might inform driver education, trauma staffing, and safety warnings to prevent a life-threatening motor vehicle crash.

  3. Continued Development and Improvement of Pneumatic Heavy Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Robert J. Englar

    2005-07-15

    The objective of this applied research effort led by Georgia Tech Research Institute is the application of pneumatic aerodynamic technology previously developed and patented by us to the design of an appropriate Heavy Vehicle (HV) tractor-trailer configuration, and experimental confirmation of this pneumatic configuration's improved aerodynamic characteristics. In Phases I to IV of our previous DOE program (Reference 1), GTRI has developed, patented, wind-tunnel tested and road-tested blown aerodynamic devices for Pneumatic Heavy Vehicles (PHVs) and Pneumatic Sports Utility Vehicles (PSUVs). To further advance these pneumatic technologies towards HV and SUV applications, additional Phase V tasks were included in the first year of a continuing DOE program (Reference 2). Based on the results of the Phase IV full-scale test programs, these Phase V tasks extended the application of pneumatic aerodynamics to include: further economy and performance improvements; increased aerodynamic stability and control; and safety of operation of Pneumatic HVs. Continued development of a Pneumatic SUV was also conducted during the Phase V program. Phase V was completed in July, 2003; its positive results towards development and confirmation of this pneumatic technology are reported in References 3 and 4. The current Phase VI of this program was incrementally funded by DOE in order to continue this technology development towards a second fuel economy test on the Pneumatic Heavy Vehicle. The objectives of this current Phase VI research and development effort (Ref. 5) fall into two categories: (1) develop improved pneumatic aerodynamic technology and configurations on smaller-scale models of the advanced Pneumatic Heavy Vehicle (PHV); and based on these findings, (2) redesign, modify, and re-test the modified full-scale PHV test vehicle. This second objective includes conduct of an on-road preliminary road test of this configuration to prepare it for a second series of SAE Type

  4. 75 FR 72987 - Brokers of Household Goods Transportation by Motor Vehicle

    Science.gov (United States)

    2010-11-29

    ... TRANSPORTATION Federal Motor Carrier Safety Administration 49 CFR Parts 371, 375, 386, and 387 RIN 2126-AA84 Brokers of Household Goods Transportation by Motor Vehicle AGENCY: Federal Motor Carrier Safety... household goods brokers which ``shall provide for the protection of shippers by motor vehicle'' (49...

  5. 78 FR 57585 - Minimum Training Requirements for Entry-Level Commercial Motor Vehicle Operators

    Science.gov (United States)

    2013-09-19

    ... Federal Motor Carrier Safety Administration 49 CFR Parts 380, 383, and 384 RIN 2126-AB06 Minimum Training Requirements for Entry-Level Commercial Motor Vehicle Operators AGENCY: Federal Motor Carrier Safety... applying for a commercial driver's license (CDL) to operate commercial motor vehicles (CMVs) in...

  6. 77 FR 71163 - Federal Motor Vehicle Safety Standards; Windshield Zone Intrusion

    Science.gov (United States)

    2012-11-29

    ... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AK13 Federal Motor Vehicle Safety... rulemaking proposal to rescind Federal Motor Vehicle Safety Standard (FMVSS) No. 219, ``Windshield zone... members included: BMW Group, Chrysler LLC, Ford Motor Company, General Motors, Mazda, Mercedes-Benz...

  7. 41 CFR 109-38.204-4 - Report of exempted motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Report of exempted motor..., TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.2-Registration, Identification, and Exemptions § 109-38.204-4 Report of exempted motor vehicles. DOE offices shall provide upon request...

  8. 76 FR 5368 - California State Motor Vehicle Pollution Control Standards; Greenhouse Gas Regulations; Within...

    Science.gov (United States)

    2011-01-31

    ... AGENCY California State Motor Vehicle Pollution Control Standards; Greenhouse Gas Regulations; Within-the... thereof shall adopt or attempt to enforce any standard relating to the control of emissions from new motor..., inspection or any other approval relating to the control of emissions from any new motor vehicle or new motor...

  9. 78 FR 51724 - California State Motor Vehicle Pollution Control Standards; Tractor-Trailer Greenhouse Gas...

    Science.gov (United States)

    2013-08-21

    ... AGENCY California State Motor Vehicle Pollution Control Standards; Tractor-Trailer Greenhouse Gas... shall adopt or attempt to enforce any standard relating to the control of emissions from new motor..., inspection or any other approval relating to the control of emissions from any new motor vehicle or new motor...

  10. 41 CFR 109-38.105 - Agency purchase and lease of motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... AVIATION, TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.1-Fuel Efficient Motor... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Agency purchase and lease of motor vehicles. 109-38.105 Section 109-38.105 Public Contracts and Property Management...

  11. Cascade Control Solution for Traction Motor for Hybrid Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Zsuzsa Preitl

    2007-10-01

    Full Text Available In this paper a hybrid electric vehicle is considered, which contains both aninternal combustion engine and an electric motor (EM. Without focusing on the othercomponents of the vehicle, the EM is treated in detail, both regarding modelling aspectsand control solutions.After a brief modelling of the plant, two cascade speed control solutions are presented: firsta classical PI+PI cascade control solution is presented. The control systems related totraction electric motors (used in vehicle traction must be able to cope with differentrequests, such as variation of the reference signal, load disturbances which depend on thetransport conditions and parametric disturbances regarding changes in the total mass ofthe vehicle. For this purpose, in the design of the speed controller (external loop a specificmethodology based on extension of the symmetrical optimum method is presented. Thecontrollers are developed using the Modulus–Optimum method for the inner loop, and theExtended Symmetrical Optimum Method, corrected based on the 2p-SO-method, for theouter loop (for a more efficient disturbance rejection.In order to force the behaviour of the system regarding the reference input, a correctionterm is introduced as a non-homogenous structured PI controller solution.Simulations were performed using numerical values taken from a real applicationconsisting in a hybrid vehicle prototype, showing satisfactory behaviour.

  12. Hydrogen cyanide exhaust emissions from in-use motor vehicles.

    Science.gov (United States)

    Baum, Marc M; Moss, John A; Pastel, Stephen H; Poskrebyshev, Gregory A

    2007-02-01

    Motor vehicle exhaust emissions are known to contain hydrogen cyanide (HCN), but emission rate data are scarce and, in the case of idling vehicles, date back over 20 years. For the first time, vehicular HCN exhaust emissions from a modern, in-use fleet at idle have been measured. The 14 tested light duty motor vehicles were operating at idle as these conditions are associated with the highest risk exposure scenarios (i.e., enclosed spaces). Vehicular HCN was detected in 89% of the sampled exhaust streams and did not correlate with instantaneous air-fuel-ratio or with any single, coemitted pollutant. However, a moderate correlation between HCN emissions and the product of carbon monoxide and nitric oxide emissions was observed under cold-start conditions. Fleet average, cold-start, undiluted HCN emissions were 105 +/- 97 ppbV (maximum: 278 ppbV), whereas corresponding emissions from vehicles operating under stabilized conditions were 79 +/- 71 ppbV (maximum: 245 ppbV); mean idle fleet HCN emission rates were 39 +/- 35 and 21 +/- 18 microg-min(-1) for cold-start and stabilized vehicles, respectively. The significance of these results is discussed in terms of HCN emissions inventories in the South Coast Air Basin of California and of health risks due to exposure to vehicular HCN.

  13. Improvement the DTC system for electric vehicles induction motors

    Directory of Open Access Journals (Sweden)

    Arif Ali

    2010-01-01

    Full Text Available A three-phase squirrel-cage induction motor is used as a propulsion system of an electric vehicle (EV. Two different control methods have been designed. The first is based on the conventional DTC Scheme adapted for three level inverter. The second is based on the application of fuzzy logic controller to the DTC scheme. The motor is controlled at different operating conditions using a FLC based DTC technique. In the simulation the novel proposed technique reduces the torque and current ripples. The EV dynamics are taken into account.

  14. Pavement Response to Variable Tyre Pressure of Heavy Vehicles

    Directory of Open Access Journals (Sweden)

    Arshad Ahmad Kamil

    2016-01-01

    Full Text Available In recent years, the effect of overinflated tyre pressure and increased heavy vehicles’ axle load on flexible pavements has become a subject of great concern because of the higher stress levels induced and damage caused to road pavements. This paper aims to evaluate the effect of variable tyre inflation pressures (using actual tyre contact/footprint area to determine the responses of flexible pavement. A full scale experiment was conducted on a heavy vehicle with 1:1:2 axle configuration, 10 R 20 tyre size and attached trailer with constant axle load. Measurements were made for actual tyre-pavement contact area. KENPAVE linear elastic program was then used to analyse the effects of the measured actual tyre-pavement contact area and the results was compared using conventional circular tyre contact area. A comparative analysis was then made between the actual contact area and the conventional circular tyre contact area. It was found that high tyre inflation pressure produce smaller contact area, giving more detrimental effect on the flexible pavement. It was also found that the temperature of tyres when the heavy vehicles are operational give less significant impact on tyre inflation pressure for the Malaysian climate.

  15. Vehicle technologies heavy vehicle program : FY 2008 benefits analysis, methodology and results --- final report.

    Energy Technology Data Exchange (ETDEWEB)

    Singh, M.; Energy Systems; TA Engineering

    2008-02-29

    This report describes the approach to estimating the benefits and analysis results for the Heavy Vehicle Technologies activities of the Vehicle Technologies (VT) Program of EERE. The scope of the effort includes: (1) Characterizing baseline and advanced technology vehicles for Class 3-6 and Class 7 and 8 trucks, (2) Identifying technology goals associated with the DOE EERE programs, (3) Estimating the market potential of technologies that improve fuel efficiency and/or use alternative fuels, and (4) Determining the petroleum and greenhouse gas emissions reductions associated with the advanced technologies. In FY 08 the Heavy Vehicles program continued its involvement with various sources of energy loss as compared to focusing more narrowly on engine efficiency and alternative fuels. These changes are the result of a planning effort that first occurred during FY 04 and was updated in the past year. (Ref. 1) This narrative describes characteristics of the heavy truck market as they relate to the analysis, a description of the analysis methodology (including a discussion of the models used to estimate market potential and benefits), and a presentation of the benefits estimated as a result of the adoption of the advanced technologies. The market penetrations are used as part of the EERE-wide integrated analysis to provide final benefit estimates reported in the FY08 Budget Request. The energy savings models are utilized by the VT program for internal project management purposes.

  16. Life-threatening motor vehicle crashes in bright sunlight

    Science.gov (United States)

    Redelmeier, Donald A.; Raza, Sheharyar

    2017-01-01

    Abstract Bright sunlight may create visual illusions that lead to driver error, including fallible distance judgment from aerial perspective. We tested whether the risk of a life-threatening motor vehicle crash was increased when driving in bright sunlight. This longitudinal, case-only, paired-comparison analysis evaluated patients hospitalized because of a motor vehicle crash between January 1, 1995 and December 31, 2014. The relative risk of a crash associated with bright sunlight was estimated by evaluating the prevailing weather at the time and place of the crash compared with the weather at the same hour and location on control days a week earlier and a week later. The majority of patients (n = 6962) were injured during daylight hours and bright sunlight was the most common weather condition at the time and place of the crash. The risk of a life-threatening crash was 16% higher during bright sunlight than normal weather (95% confidence interval: 9–24, P < 0.001). The increased risk was accentuated in the early afternoon, disappeared at night, extended to patients with different characteristics, involved crashes with diverse features, not apparent with cloudy weather, and contributed to about 5000 additional patient-days in hospital. The increased risk extended to patients with high crash severity as indicated by ambulance involvement, surgical procedures, length of hospital stay, intensive care unit admission, and patient mortality. The increased risk was not easily attributed to differences in alcohol consumption, driving distances, or anomalies of adverse weather. Bright sunlight is associated with an increased risk of a life-threatening motor vehicle crash. An awareness of this risk might inform driver education, trauma staffing, and safety warnings to prevent a life-threatening motor vehicle crash. Level of evidence: Epidemiologic Study, level III. PMID:28072708

  17. ELECTROMAGNETIC BIOSPHERE POLLUTION BY MOTOR TRANSPORT (VEHICLES, ELECTRIC VEHICLES, HYBRID VEHICLES

    Directory of Open Access Journals (Sweden)

    S. Selivanov

    2009-01-01

    Full Text Available The physics of the electromagnetic field is considered. The analysis of electromagnetic radiation on the human-being, the origin of which is the vehicle the electric vehicle, the hybrid vehicle is being considered. The monitoring of electromagnetic radiation of vehicles is carried out.

  18. 78 FR 76265 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Science.gov (United States)

    2013-12-17

    ... Vehicle Fuel Efficiency Program. 536 Transfer and Trading of Fuel Economy Credits. ] 537 Automotive Fuel... Sealed Beam Headlamp Information. 565 Vehicle Identification Number (VIN) Requirements. 566 Manufacturer...: Have we organized the material to suit the public's needs? Are the requirements in the rule...

  19. Systematic review of military motor vehicle crash-related injuries.

    Science.gov (United States)

    Krahl, Pamela L; Jankosky, Christopher J; Thomas, Richard J; Hooper, Tomoko I

    2010-01-01

    Motor vehicle crashes account for nearly one third of U.S. military fatalities annually. The objective of this review is to summarize the published evidence on injuries due specifically to military motor vehicle (MMV) crashes. A search of 18 electronic databases identified English language publications addressing MMV crash-related injuries between 1970 and 2006 that were available to the general public. Documents limited in distribution to military or government personnel were not evaluated. Relevant articles were categorized by study design. The search identified only 13 studies related specifically to MMV crashes. Most were case reports or case series (n=8); only one could be classified as an intervention study. Nine of the studies were based solely on data from service-specific military safety centers. Few studies exist on injuries resulting from crashes of military motor vehicles. Epidemiologic studies that assess injury rates, type, severity, and risk factors are needed, followed by studies to evaluate targeted interventions and prevention strategies. Interventions currently underway should be evaluated for effectiveness, and those proven effective in the civilian community, such as graduated driver licensing, should be considered for implementation and evaluation in military populations. Published by Elsevier Inc.

  20. 77 FR 22383 - Petition for Exemption From the Federal Motor Vehicle Motor Theft Prevention Standard; TESLA

    Science.gov (United States)

    2012-04-13

    ... Theft Prevention Standard; TESLA AGENCY: National Highway Traffic Safety Administration (NHTSA... full the petition of Tesla Motors Inc's. (Tesla) for an exemption of the Model S vehicle line in... Prevention Standard. Tesla requested confidential treatment for specific information in its petition. The...

  1. Hybrid and electric advanced vehicle systems (heavy) simulation

    Science.gov (United States)

    Hammond, R. A.; Mcgehee, R. K.

    1981-01-01

    A computer program to simulate hybrid and electric advanced vehicle systems (HEAVY) is described. It is intended for use early in the design process: concept evaluation, alternative comparison, preliminary design, control and management strategy development, component sizing, and sensitivity studies. It allows the designer to quickly, conveniently, and economically predict the performance of a proposed drive train. The user defines the system to be simulated using a library of predefined component models that may be connected to represent a wide variety of propulsion systems. The development of three models are discussed as examples.

  2. Catalyst useful at highter temperatures, especially for purification of exhaust gases from motor vehicles and industrial plants

    Energy Technology Data Exchange (ETDEWEB)

    Koberstein, E.; Lakatos, E.

    1975-12-23

    A description is given of a catalyst for the purification of exhaust gases from industrial processes and motor vehicles by combustion of oxidizable impurities to carbon dioxide and water and by removal of nitrogen oxide at elevated temperatures in contact with air. The catalyst consists essentially of a calcined mixture of eta and gamma aluminum oxide and heavy metal oxide compounds containing chromium and nickel or copper with nickel. The metal oxide compounds are 55 to 90 weight percent, and the molar proportion of the chromium to the other heavy metal is between about 1:0.5 and 1:2.5. The metal oxide compounds are formed by precipitating chromium from a solution of ammonium bichromate with a soluble salt of the other metal or metals. Purification of exhaust gases from industrial processes and motor vehicles, as well as a method for making the catalyst, are discussed.

  3. 75 FR 76185 - Federal Motor Vehicle Safety Standard, Rearview Mirrors; Federal Motor Vehicle Safety Standard...

    Science.gov (United States)

    2010-12-07

    ... Rearview Video Systems viii. Development of a Performance-Based or Technology-Neutral Standard ix. Other... scene and vehicle, as well as interviews of the involved parties when possible. When an on-site...

  4. Program Manager Medium and Heavy Tactical Vehicles Needs to Improve Acquisition Practices

    Science.gov (United States)

    2015-05-05

    5 , 2 0 1 5 Program Manager Medium and Heavy Tactical Vehicles Needs to Improve Acquisition Practices Report No. DODIG-2015-116 Report...TYPE 3. DATES COVERED 00-00-2015 to 00-00-2015 4. TITLE AND SUBTITLE Program Manager Medium and Heavy Tactical Vehicles Needs to Improve... Medium and Heavy Tactical Vehicles Needs to Improve Acquisition Practices Visit us at www.dodig.mil Objective The objective was to assess the propriety

  5. 40 CFR 69.52 - Non-motor vehicle diesel fuel.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Non-motor vehicle diesel fuel. 69.52... (CONTINUED) SPECIAL EXEMPTIONS FROM REQUIREMENTS OF THE CLEAN AIR ACT Alaska § 69.52 Non-motor vehicle diesel... NRLM diesel fuel. (5) Exempt NRLM diesel fuel and heating oil must be segregated from motor...

  6. 41 CFR 109-38.5106 - Application of motor vehicle use goals.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Application of motor vehicle use goals. 109-38.5106 Section 109-38.5106 Public Contracts and Property Management Federal... Equipment § 109-38.5106 Application of motor vehicle use goals. (a) At least annually, the motor...

  7. 75 FR 12123 - Federal Motor Vehicle Safety Standards; Side Impact Protection; Fuel System Integrity; Electric...

    Science.gov (United States)

    2010-03-15

    ... Motors, Porsche, Toyota, and Volkswagen. Lead time. The final rule specified that manufacturers must... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AK48 Federal Motor Vehicle Safety..., 2007, final rule that upgraded Federal Motor Vehicle Safety Standard (FMVSS) No. 214, ``Side impact...

  8. 76 FR 36486 - Preliminary Theft Data; Motor Vehicle Theft Prevention Standard

    Science.gov (United States)

    2011-06-22

    ....5216 156 VOLKSWAGEN PASSAT 16 31,310 0.5110 157 GENERAL MOTORS......... SATURN SKY 2 4,078 0.4904 158... National Highway Traffic Safety Administration 49 CFR Part 541 Preliminary Theft Data; Motor Vehicle Theft... requests comments on data about passenger motor vehicle thefts that occurred in calendar year (CY) 2009...

  9. 76 FR 52880 - Federal Motor Vehicle Safety Standards; Side Impact Protection

    Science.gov (United States)

    2011-08-24

    ... Rover, Mazda, Mercedes-Benz USA, Mitsubishi Motors, Porsche, Toyota, and Volkswagen. III. Response to... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AK82 Federal Motor Vehicle Safety... Manufacturers regarding a March 2010 final rule on the Federal motor vehicle safety standard for side impact...

  10. 77 FR 58500 - Final Theft Data; Motor Vehicle Theft Prevention Standard

    Science.gov (United States)

    2012-09-21

    ... VOLKSWAGEN PASSAT 4 13,204 0.3029 160 GENERAL MOTORS...... GMC TERRAIN......... 13 48,605 0.2675 161 SUZUKI... National Highway Traffic Safety Administration 49 CFR Part 541 Final Theft Data; Motor Vehicle Theft... thefts of model year (MY) 2010 passenger motor vehicles that occurred in calendar year (CY) 2010. The...

  11. 75 FR 11005 - Final Theft Data; Motor Vehicle Theft Prevention Standard

    Science.gov (United States)

    2010-03-10

    ... QUATTRO.. 8 6992 1.1442 111 VOLKSWAGEN..... GOLF/RABBIT/GTI..... 46 41314 1.1134 112 GENERAL MOTORS... National Highway Traffic Safety Administration 49 CFR Part 541 Final Theft Data; Motor Vehicle Theft... thefts of model year (MY) 2007 passenger motor vehicles that occurred in calendar year (CY) 2007. The...

  12. 78 FR 41016 - Preliminary Theft Data; Motor Vehicle Theft Prevention Standard

    Science.gov (United States)

    2013-07-09

    ... 100 181,785 0.5501 132 GENERAL MOTORS..... CADILLAC SRX...... 32 59,077 0.5417 133 VOLKSWAGEN... National Highway Traffic Safety Administration 49 CFR Part 541 Preliminary Theft Data; Motor Vehicle Theft... requests comments on data about passenger motor vehicle thefts that occurred in calendar year (CY) 2011...

  13. 76 FR 55829 - Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems

    Science.gov (United States)

    2011-09-09

    ... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AL02 Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems AGENCY: National Highway Traffic Safety Administration... changes to a new Federal motor vehicle safety standard requiring light vehicles to be equipped with...

  14. Crash and burn? Vehicle, collision, and driver factors that influence motor vehicle collision fires.

    Science.gov (United States)

    Bunn, T L; Slavova, S; Robertson, M

    2012-07-01

    A retrospective population-based case-control study was performed to determine the association between vehicle fires, and vehicle, collision, and driver factors on highways with a posted speed limit of at least 55mph. Data were obtained from the Kentucky Collision Report Analysis for Safer Highways (CRASH) electronic files for 2000-2009 from the Kentucky State Police Records Sections. The results from the final multiple logistic regression show that large trucks were at a higher risk for a collision involving a fire than passenger vehicles and pickup trucks. When controlling for all other variables in the model, vehicles 6 years old and older, driving straight down the highway, and single vehicle collisions were also identified as factors that increase the risk of motor vehicle collision fires on roadways with a posted speed limit of ≥55mph. Of the 2096 vehicles that caught fire, there were 632 (30%) non-fatally injured drivers and 224 (11%) fatally injured drivers. The results of this study have the potential to inform public health messages directed to the transportation industry, particularly semi truck drivers, in regard to fire risk.

  15. The GREET Model Expansion for Well-to-Wheels Analysis of Heavy-Duty Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Hao [Argonne National Lab. (ANL), Argonne, IL (United States); Burnham, Andrew [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Hang, Wen [Argonne National Lab. (ANL), Argonne, IL (United States); Vyas, Anant [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-05-01

    Heavy-duty vehicles (HDVs) account for a significant portion of the U.S. transportation sector’s fuel consumption, greenhouse gas (GHG) emissions, and air pollutant emissions. In our most recent efforts, we expanded the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREETTM) model to include life-cycle analysis of HDVs. In particular, the GREET expansion includes the fuel consumption, GHG emissions, and air pollutant emissions of a variety of conventional (i.e., diesel and/or gasoline) HDV types, including Class 8b combination long-haul freight trucks, Class 8b combination short-haul freight trucks, Class 8b dump trucks, Class 8a refuse trucks, Class 8a transit buses, Class 8a intercity buses, Class 6 school buses, Class 6 single-unit delivery trucks, Class 4 single-unit delivery trucks, and Class 2b heavy-duty pickup trucks and vans. These vehicle types were selected to represent the diversity in the U.S. HDV market, and specific weight classes and body types were chosen on the basis of their fuel consumption using the 2002 Vehicle Inventory and Use Survey (VIUS) database. VIUS was also used to estimate the fuel consumption and payload carried for most of the HDV types. In addition, fuel economy projections from the U.S. Energy Information Administration, transit databases, and the literature were examined. The U.S. Environmental Protection Agency’s latest Motor Vehicle Emission Simulator was employed to generate tailpipe air pollutant emissions of diesel and gasoline HDV types.

  16. Thermal Management of Power Electronics and Electric Motors for Electric-Drive Vehicles (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Narumanchi, S.

    2014-09-01

    This presentation is an overview of the power electronics and electric motor thermal management and reliability activities at NREL. The focus is on activities funded by the Department of Energy Vehicle Technologies Office Advanced Power Electronics and Electric Motors Program.

  17. The Aerodynamics of Heavy Vehicles III : Trucks, Buses and Trains

    CERN Document Server

    Orellano, Alexander

    2016-01-01

    This volume contains papers presented at the International conference “The Aerodynamics of Heavy Vehicles III: Trucks, Buses and Trains” held in Potsdam, Germany, September 12-17, 2010 by Engineering Conferences International (ECI). Leading scientists and engineers from industry, universities and research laboratories, including truck and high-speed train manufacturers and operators were brought together to discuss computer simulation and experimental techniques to be applied for the design of more efficient trucks, buses and high-speed trains in the future.   This conference was the third in the series after Monterey-Pacific Groove in 2002 and Lake Tahoe in 2007.  The presentations address different aspects of train aerodynamics (cross wind effects, underbody flow, tunnel aerodynamics and aeroacoustics, experimental techniques), truck aerodynamics (drag reduction, flow control, experimental and computational techniques) as well as computational fluid dynamics and bluff body, wake and jet flows.

  18. National Motor Vehicle Crash Causation Survey (NMVCCS) - NMVCCS XML Case Viewer

    Data.gov (United States)

    Department of Transportation — The National Motor Vehicle Crash Causation Survey (NMVVCS) was a nationwide survey of crashes involving light passenger vehicles, with a focus on the factors related...

  19. THE STATUS OF MEASURES TO COMBAT MOTOR VEHICLE AIR POLLUTION AND OUTSTANDING ISSUES IN JAPAN

    Directory of Open Access Journals (Sweden)

    Yasuji SUZUKI

    2000-01-01

    Full Text Available In the quarter century since fiscal 1970, air pollution generated by motor vehicles has not improved sufficiently, and the state is severe, particularly in major cities. This is caused directly by the increasing volume of motor vehicle traffic that is, in turn, a result of the fact that contemporary socio-economic systems and lifestyles depend largely on the use of the motor vehicle. Social cost of air pollution must be internalized to solve the air pollution problem and the total volume of motor vehicle emission must be reduced and controlled to meet environmental quality standards, not just regulated on a vehicle-by-vehicle basis. This will require a review of the prevailing vehicle-dependent socio-economic systems and lifestyles, and necessitate that we look at a set of drastic measures which strike at the fundamentals of our vehicle usage.

  20. 40 CFR 86.1817-05 - Complete heavy-duty vehicle averaging, trading, and banking program.

    Science.gov (United States)

    2010-07-01

    ..., trading, and banking program. 86.1817-05 Section 86.1817-05 Protection of Environment ENVIRONMENTAL... Complete heavy-duty vehicle averaging, trading, and banking program. (a) General. (1) Complete heavy-duty vehicles eligible for the NOX averaging, trading and banking program are described in the applicable...

  1. 49 CFR 393.130 - What are the rules for securing heavy vehicles, equipment and machinery?

    Science.gov (United States)

    2010-10-01

    ..., equipment and machinery? 393.130 Section 393.130 Transportation Other Regulations Relating to Transportation... heavy vehicles, equipment and machinery? (a) Applicability. The rules in this section apply to the transportation of heavy vehicles, equipment and machinery which operate on wheels or tracks, such as front...

  2. 76 FR 53660 - Federal Motor Vehicle Safety Standards; Seat Belt Assemblies

    Science.gov (United States)

    2011-08-29

    ... Vehicle Safety Standards; Seat Belt Assemblies AGENCY: National Highway Traffic Safety Administration... rulemaking submitted by Mr. Michael R. Schramm, to amend the Federal motor vehicle safety standard on seat... during normal vehicle operation and certain crash scenarios, resulting in increased risk to vehicle...

  3. Emergency Department and Older Adult Motor Vehicle Collisions

    Directory of Open Access Journals (Sweden)

    Lotfipour, Shahram

    2013-11-01

    Full Text Available In 2009, the Center for Disease Control and Prevention reported there were 33 million licensed drivers 65 years and older in the U.S. This represents a 23 percent increase from 1999, number that is predicted to double by 2030. Although, motor vehicle collisions (MVC-related to emergency department (ED visits for older adults are lower per capita than for younger adults, the older-adults MVCs require more resources, such as additional diagnostic imaging and increased odds of admission. Addressing the specific needs of older-adults could lead to better outcomes yet not enough research currently exists. It is important to continue training emergency physicians to treat the increasing older-patient population, but its also imperative we increase our injury prevention and screening methodology. We review research findings from the article: Emergency Department Visits by Older Adults for Motor Vehicle Collisions: A Five-year national study, with commentary on current recommendation and policies for the growing older-adult driving population. [West J Emerg Med.2013;14(6:582–584.

  4. Disparity surveillance of nonfatal motor vehicle crash injuries.

    Science.gov (United States)

    Zhang, Ying; Lin, Ge

    2013-01-01

    The lack of race information for nonfatal motor vehicle crash injuries in the United States has limited the understanding of racial disparities in motor vehicle crashes (MVCs). In this article, we describe a pilot surveillance project in Nebraska that linked crash reports and driver's license records to investigate racial disparity among nonfatal MVC injuries. The project linked 43,157 severely and nonseverely injured drivers from crash reports between 2006 and 2010 to the corresponding state driver's license database so that drivers' race information from each MVC could be retrieved. A log rate model was used to examine the likelihood of MVC injuries by drivers' race along the dimensions of age, sex, and place of residence. Black drivers had 31.6 and 87 percent more severe and nonsevere injuries, respectively, than white drivers. Rural residents were more likely than urban residents to have severe MVC injuries. Controlling for residence status, age, and sex did not alter the basic pattern that black drivers had higher rates of nonfatal MVC injuries. The linkage approach provides an effective way to obtain additional information for MVC injury disparity surveillance. To reduce racial disparities in severe and nonsevere MVC injuries, race-sex-, race-age-, and race-location-specific interventions should be considered based on their significant contributions to disparity.

  5. Rhabdomyolysis and unilateral renal infarction after a motor vehicle crash.

    Science.gov (United States)

    Sanai, Toru; Yokoyama, Masaaki; Murata, Akinari; Ukon, Kei; Fuchigami, Kazumi

    2007-01-01

    A 46-year-old man with no previous history of abnormal urinalysis findings or renal dysfunction was admitted to a local hospital because of a motor vehicle crash. An open laparotomy was performed to treat a perforation of the small intestine. After operation, oliguria and renal dysfunction developed, and he was admitted to our hospital because of acute renal failure after trauma. Acute renal failure was assumed to be due to rhabdomyolysis with elevated serum creatinine, blood urea nitrogen, and creatine kinase levels and myoglobinemia. Left flank pain occurred several days after admission, and the serum alkaline phosphatase level increased between days 5 and 12 following admission. Although hemodialysis was performed 9 times and the urine output was satisfactory, the creatinine clearance levels increased only to about 50 mL/min/1.73 m2 (0.84 mL/s/m2) at 6 weeks following admission. As a result, a diagnosis of renal infarction due to acute renal artery occlusion was considered. The left kidney was atrophic on an abdominal computed tomographic scan and was nonfunctioning on a renogram. This case shows the importance of not overlooking the possibility of a renal infarction associated with rhabdomyolysis after a motor vehicle crash. In particular, the changes in the serum alkaline phosphatase levels were important in making a correct diagnosis in this case.

  6. Accidents involving off-road motor vehicles in a northern community.

    OpenAIRE

    Hasselback, P; Wilding, H R

    1987-01-01

    The increasing number of accidents associated with off-road motor vehicles used for recreational purposes prompted this prospective study. During 1985 the records of victims of all motor vehicle accidents who were seen at the Hudson Bay Union Hospital, Hudson Bay, Sask., were studied; patients involved in on-road vehicle accidents were included for comparison. Emphasis was placed on age, vehicle type, mechanism of accident, injury severity and the use of safety features. Almost half of the vi...

  7. The link between texting and motor vehicle collision frequency in the orthopaedic trauma population

    Directory of Open Access Journals (Sweden)

    Neil M. Issar

    2013-07-01

    Full Text Available BACKGROUND: This study will evaluate whether or not texting frequency while driving and/or texting frequency in general are associated with an increased risk of incurring a motor vehicle collision (MVC resulting in orthopaedic trauma injuries. METHODS: All patients who presented to the Vanderbilt University Medical Center Orthopaedic Trauma Clinic were administered a questionnaire to determine background information, mean phone use, texting frequency, texting frequency while driving, and whether or not the injury was the result of an MVC in which the patient was driving. RESULTS: 237 questionnaires were collected. 60 were excluded due to incomplete date, leaving 57 questionnaires in the MVC group and 120 from patients with non-MVC injuries. Patients who sent more than 30 texts per week (“heavy texters” were 2.22 times more likely to be involved in an MVC than those who texted less frequently. 84% of respondents claimed to never text while driving. Dividing the sample into subsets on the basis of age (25 years of age or below considered “young adult,” and above 25 years of age considered “adult”,young, heavy texters were 6.76 times more likely to be involved in an MVC than adult non-heavy texters (p = 0.000. Similarly, young adult, non-heavy texters were 6.65 (p = 0.005 times more likely to be involved in an MVC, and adult, heavy texters were 1.72 (p = 0.186 times more likely to be involved in an MVC. CONCLUSIONS: Patients injured in an MVC sent more text messages per week than non-MVC patients. Additionally, controlling for age demonstrated that young age and heavy general texting frequency combined had the highest increase in MVC risk, with the former being the variable of greatest effect

  8. Control of air pollution from new motor vehicles and new motor vehicle engines. Federal certification test results for 1993 model year

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-01

    The regulations that apply to the control of emissions from vehicles and engines, appearing in 40 CFR Part 86, set maximum allowable limits on exhaust and evaporative emission levels. The exhaust limits are applicable to gasoline-fueled and diesel light-duty vehicles (passenger cars), light-duty trucks, and heavy-duty engines, and to gasoline-fueled motorcycles. The evaporative limits are applicable to gasoline-fueled light-duty vehicles, light-duty trucks, and heavy-duty vehicles. The report contains all of the individual tests that were required by the certification procedures.

  9. Orion Launch Abort Vehicle Attitude Control Motor Testing

    Science.gov (United States)

    Murphy, Kelly J.; Brauckmann, Gregory J.; Paschal, Keith B.; Chan, David T.; Walker, Eric L.; Foley, Robert; Mayfield, David; Cross, Jared

    2011-01-01

    Current Orion Launch Abort Vehicle (LAV) configurations use an eight-jet, solid-fueled Attitude Control Motor (ACM) to provide required vehicle control for all proposed abort trajectories. Due to the forward position of the ACM on the LAV, it is necessary to assess the effects of jet-interactions (JI) between the various ACM nozzle plumes and the external flow along the outside surfaces of the vehicle. These JI-induced changes in flight control characteristics must be accounted for in developing ACM operations and LAV flight characteristics. A test program to generate jet interaction aerodynamic increment data for multiple LAV configurations was conducted in the NASA Ames and NASA Langley Unitary Plan Wind Tunnels from August 2007 through December 2009. Using cold air as the simulant gas, powered subscale models were used to generate interaction data at subsonic, transonic, and supersonic test conditions. This paper presents an overview of the complete ACM JI experimental test program for Orion LAV configurations, highlighting ACM system modeling, nozzle scaling assumptions, experimental test techniques, and data reduction methodologies. Lessons learned are discussed, and sample jet interaction data are shown. These data, in conjunction with computational predictions, were used to create the ACM JI increments for all relevant flight databases.

  10. Design and research on the electronic parking brake system of the medium and heavy duty vehicles

    OpenAIRE

    Wang, Hongliang; Dong, Wei; Li, Nan; Dai, Xiaoming

    2015-01-01

    Focusing on auto control of parking brake system of the medium and heavy duty vehicles, the key problems are studied including the system design and control strategies. The structure and working principle of the parking brake system of the medium and heavy duty vehicles are analyzed. The functions of EPB are proposed. The important information of the vehicle are analyzed which could influence the EPB system. The overall plan of the pneumatic EPB system is designed, which adopts the two-positi...

  11. Pneumatic brake control for precision stopping of heavy-duty vehicles

    OpenAIRE

    Bu, Fanping; Tan, Han-Shue

    2007-01-01

    Precision stopping is an important automated vehicle control function that is critical in applications such as precision bus docking, automated truck or bus fueling, as well as automatic intersection, or toll booth stopping. The initial applications of this technology are most likely to be applied to heavy-duty vehicles such as buses or trucks. Such applications require specific attention to brake control since the characteristics of a typical pneumatic brake system of a heavy vehicle is inhe...

  12. Modeling Hot Spot Motor Vehicle Theft Crime in Relation to Landuse and Settlement Patterns

    Directory of Open Access Journals (Sweden)

    Djaka Marwasta

    2004-01-01

    Full Text Available The crowd of Yogyakarta urban has impacted its surrounding area, including Depok sub district, which is indicated by the rising of physical development, for example education facilities and settlements. The progress does not only bring positive impact, but also negative impact for instance the rising of crime number i.e. motor vehicle robbery. The aims of this research are 1 mapping motor vehicle robbery data as the distribution map and identifying motor vehicle robbery hot spot base on distrbution map; and 2 studying the correlation of motor vehicle robbery hot spot with physical environment phenomena, i.e. land use type and settlement pattern. The research method consists of two parts; they are motor vehicle robbery cluster analysis and the relation of motor vehicle robbery and physical environment analysis. Motor vehicle robbery cluster analysis is using distribution data, which analyzes the distribution into motor vehicle robbery hot spot with nearest neighbor tehnique. Contingency coefficient and frequency distribution analysis is used to analyze the correlation of motor vehicle robbery hot spot and physical environment. Contingency coefficient is used to study the relation of motor vehicle robbery hot spot polygon with physical environment condition, whereas frequency distribution is used to study the distribution of motor vehicle robbery in the hot spot with physical environment condition. Physical environment which consists of land use type, housing density, house regularity pattern, and the average of building size, are obtained from interpretation of black and white panchromatic aerial photograph year 2000, in the scale 1 : 20.000. the most motor vehicle robbery hot spot is found on the settlement area, 68,3% from 378 motor vehicle robbery cases in the hot spot. The seond level is found on the education area (16.4%. The most motor vehicle hot spot in the settlement is found on the hight density and irregular settlement, which have big

  13. Preliminary evaluation of wheelchair occupant restraint system usage in motor vehicles.

    Science.gov (United States)

    van Roosmalen, Linda; Bertocci, Gina E; Hobson, Douglas A; Karg, Patricia

    2002-01-01

    Individuals using wheeled mobility devices (WMDs) often use them as motor vehicle seats during transportation. Wheelchair occupant restraint systems (WORSs), consisting of upper torso and pelvic restraints, are usually mounted to the structure of transit vehicles to secure individuals within their wheelchair seats. This preliminary study attempts to evaluate the use and satisfaction of currently installed vehicle-mounted WORSs for individuals using WMD as seats in motor vehicles. A survey was conducted among 33 adults who use their WMD to travel in motor vehicles. Results from the survey showed that upper torso and pelvic restraints installed in private vehicles are quick, comfortable, and easy to use. However, WORS installed in mass transit and paratransit are often uncomfortable to wear, difficult to reach, and time-consuming to use. This preliminary study documents the growing need for developing alternative WORS that are safe, comfortable, and that allow independent usage for wheelchair occupants while traveling in a motor vehicle.

  14. From the Kinetic Energy Recovery System to the Thermo-Hydraulic Hybrid Motor Vehicle

    Science.gov (United States)

    Cristescu, Corneliu; Drumea, Petrin; Guta, Dragos; Dumitrescu, Catalin

    2011-12-01

    The paper presents some theoretical and experimental results obtained by the Hydraulics and Pneumatics Research Institute INOE 2000-IHP with its partners, regarding the creating of one hydraulic system able to recovering the kinetic energy of the motor vehicles, in the braking phases, and use this recovered energy in the starting and accelerating phases. Also, in the article is presented a testing stand, which was especially designed for testing the hydraulic system for recovery the kinetic energy. Through mounting of the kinetic energy recovering hydraulic system, on one motor vehicle, this vehicle became a thermo-hydraulic hybrid vehicle. Therefore, the dynamic behavior was analyzed for the whole hybrid motor vehicle, which includes the energy recovery system. The theoretical and experimental results demonstrate the possible performances of the hybrid vehicle and that the kinetic energy recovery hydraulic systems are good means to increase energy efficiency of the road motor vehicles and to decrease of the fuel consumption.

  15. 77 FR 65840 - Section 610 Reviews of Heavy-Duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur...

    Science.gov (United States)

    2012-10-31

    ...-Duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur Control Requirements (Heavy-Duty 610... EPA's 610 Review related to Heavy-Duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur... Review of Heavy-Duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur Control Requirements...

  16. 41 CFR 101-25.110-3 - Tires accompanying new motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... motor vehicles. 101-25.110-3 Section 101-25.110-3 Public Contracts and Property Management Federal...-GENERAL 25.1-General Policies § 101-25.110-3 Tires accompanying new motor vehicles. The tire identifications and recordkeeping regulations issued by the Department of Transportation require each...

  17. 36 CFR 1005.4 - Commercial passenger-carrying motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Commercial passenger-carrying motor vehicles. 1005.4 Section 1005.4 Parks, Forests, and Public Property PRESIDIO TRUST COMMERCIAL AND PRIVATE OPERATIONS § 1005.4 Commercial passenger-carrying motor vehicles. Passenger-carrying...

  18. 76 FR 72404 - Adequacy Status of Motor Vehicle Emissions Budgets in Submitted PM10

    Science.gov (United States)

    2011-11-23

    ... [Federal Register Volume 76, Number 226 (Wednesday, November 23, 2011)] [Notices] [Page 72404] [FR Doc No: 2011-30305] ENVIRONMENTAL PROTECTION AGENCY [FRL-9495-4] Adequacy Status of Motor Vehicle... that the Agency has found that the motor vehicle emissions budgets (MVEBs) for particulate matter...

  19. 49 CFR 177.823 - Movement of motor vehicles in emergency situations.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Movement of motor vehicles in emergency situations. 177.823 Section 177.823 Transportation Other Regulations Relating to Transportation PIPELINE AND... CARRIAGE BY PUBLIC HIGHWAY General Information and Regulations § 177.823 Movement of motor vehicles...

  20. 77 FR 60672 - Grant of Authority for Subzone Status; Tesla Motors, Inc., (Electric Passenger Vehicles), Palo...

    Science.gov (United States)

    2012-10-04

    ... establish a special-purpose subzone at the electric passenger vehicle manufacturing facilities of Tesla... electric passenger vehicles and related powertrain components at the Tesla Motors, Inc., facilities located... Foreign-Trade Zones Board Grant of Authority for Subzone Status; Tesla Motors, Inc., (Electric Passenger...

  1. 75 FR 6338 - Protection of Stratospheric Ozone: New Substitute in the Motor Vehicle Air Conditioning Sector...

    Science.gov (United States)

    2010-02-09

    ... to use conditions as a substitute for CFC-12 in motor vehicle air conditioning. The proposed... AGENCY 40 CFR Part 82 Protection of Stratospheric Ozone: New Substitute in the Motor Vehicle Air Conditioning Sector Under the Significant New Alternatives Policy (SNAP) Program AGENCY: Environmental...

  2. 41 CFR 101-26.501-9 - Centralized motor vehicle leasing program.

    Science.gov (United States)

    2010-07-01

    ... leasing program. 101-26.501-9 Section 101-26.501-9 Public Contracts and Property Management Federal...-PROCUREMENT SOURCES AND PROGRAM 26.5-GSA Procurement Programs § 101-26.501-9 Centralized motor vehicle leasing program. GSA has a centralized leasing program to provide an additional source of motor vehicle support...

  3. 78 FR 8122 - Adequacy Status of Motor Vehicle Emission Budgets for Transportation Conformity Purposes...

    Science.gov (United States)

    2013-02-05

    ... AGENCY Adequacy Status of Motor Vehicle Emission Budgets for Transportation Conformity Purposes... transportation conformity purposes. The submittal includes MOVES2010 motor vehicle emissions budgets for 2017 and... submitted SIPs cannot be used for conformity determinations until EPA has affirmatively found them...

  4. 75 FR 23306 - Establishment of Advisory Committee on the National Motor Vehicle Title Information System

    Science.gov (United States)

    2010-05-03

    ... Information System AGENCY: Office of Justice Programs (OJP), Justice. ACTION: Notice of establishment of the National Motor Vehicle Title Information System (NMVTIS) Advisory Board. SUMMARY: Pursuant to the National Motor Vehicle Title Information System (NMVTIS) Final Rule, 74 FR 5740, 5774 (January 30, 2009)...

  5. 49 CFR 571.404 - Standard No. 404; Platform lift installations in motor vehicles.

    Science.gov (United States)

    2010-10-01

    ... Systems for Motor Vehicles (49 CFR 571.403). S4.1.5Platform lighting on public use lifts. Public use lifts... be equipped with a public use lift certified as meeting Federal Motor Vehicle Safety Standard No. 403... subject to paragraph S4.1.1, must be equipped with a platform lift certified as meeting either the public...

  6. ESTIMATION OF THE MAIN CHARACTERISTICS OF THE TRACTION BLDC MOTOR ON THE BASIS OF VEHICLE ALTERNATOR

    Directory of Open Access Journals (Sweden)

    V. Dvadnenko

    2014-10-01

    Full Text Available A method of estimation of basic parameters of the BLDC motor based on the vehicle powerful alternator to convert an ordinary vehicle into a hybrid one is offered. The results of estimation of basic characteristics of the electric motor on the basis of the automobile alternator G290 are presented.

  7. 41 CFR 102-34.40 - Who must comply with motor vehicle fuel efficiency requirements?

    Science.gov (United States)

    2010-07-01

    ... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 34-MOTOR VEHICLE MANAGEMENT Obtaining Fuel Efficient Motor Vehicles § 102-34.40 Who must comply... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Who must comply...

  8. 48 CFR 970.5223-5 - DOE motor vehicle fleet fuel efficiency.

    Science.gov (United States)

    2010-10-01

    ... and Contract Clauses for Management and Operating Contracts 970.5223-5 DOE motor vehicle fleet fuel efficiency. Link to an amendment published at 75 FR 57695, Sept. 22, 2010. As prescribed in 48 CFR 970.2307-2... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false DOE motor vehicle...

  9. 76 FR 10897 - Status of Motor Vehicle Budgets in Submitted State Implementation Plan for Transportation...

    Science.gov (United States)

    2011-02-28

    ... AGENCY Status of Motor Vehicle Budgets in Submitted State Implementation Plan for Transportation... Adequacy of Motor Vehicle Emissions Budget AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of... Register on February 9, 2011 (76 FR 7204) announcing that EPA has withdrawn its May 30, 2008...

  10. 78 FR 57503 - Revision to the Washington State Implementation Plan; Approval of Motor Vehicle Emission Budgets...

    Science.gov (United States)

    2013-09-19

    ... AGENCY 40 CFR Part 52 Revision to the Washington State Implementation Plan; Approval of Motor Vehicle Emission Budgets and Determination of Attainment for the 2006 24-Hour Fine Particulate Standard; Tacoma... November 28, 2012, to establish motor vehicle emission budgets for the Tacoma-Pierce County...

  11. 77 FR 19155 - Federal Motor Vehicle Safety Standards; Seat Belt Assembly Anchorages; Incorporation by Reference

    Science.gov (United States)

    2012-03-30

    ... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AL05 Federal Motor Vehicle Safety...: This NPRM proposes to amend Federal Motor Vehicle Safety Standard No. 210, ``Seat belt assembly..., MY 2000 Chevrolet S-10, MY 2002 Chevrolet TrailBlazer, MY 2003 Volkswagen Jetta, MY 1996 Ford F-350...

  12. 41 CFR 101-26.4902-1781 - GSA Form 1781, Motor Vehicle Requisition-Delivery Order.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true GSA Form 1781, Motor Vehicle Requisition-Delivery Order. 101-26.4902-1781 Section 101-26.4902-1781 Public Contracts and... GSA Form 1781, Motor Vehicle Requisition—Delivery Order. Note: The form illustrated in §...

  13. BENCHMARKING FOR THE ROMANIAN HEAVY COMMERCIAL VEHICLES MARKET

    Directory of Open Access Journals (Sweden)

    Pop Nicolae Alexandru

    2014-07-01

    Full Text Available The globalization has led to a better integration of international markets of goods, services and capital markets, fact which leads to a significant increase of investments in those regions with low labor cost and with access to commercial routes. The development of international trade has imposed a continuous growth of the volumes of transported goods and the development of a transport system, able to stand against the new pressure exercised by cost, time and space. The solution to efficient transport is the intermodal transportation relying on state-of-the-art technological platforms, which integrates the advantages specific to each means of transportation: flexibility for road transportation, high capacity for railway, low costs for sea, and speed for air transportation. Romania’s integration in the pan-European transport system alongside with the EU’s enlargement towards the east will change Romania’s positioning into a central one. The integrated governmental program of improving the intermodal infrastructure will ensure fast railway, road and air connections. For the Danube harbors and for the sea ports, EU grants and allowances will be used thus increasing Romania’s importance in its capacity as one of Europe’s logistical hubs. The present paper intends to use benchmarking, the management and strategic marketing tool, in order to realize an evaluation of the Romanian heavy commercial vehicles market, within European context. Benchmarking encourages change in a complex and dynamic context where a permanent solution cannot be found. The different results stimulate the use of benchmarking as a solution to reduce gaps. MAN’s case study shows the dynamics of the players on the Romanian market for heavy commercial vehicles, when considering the strong growth of Romanian exported goods but with a modest internal demand, a limited but developing road infrastructure, and an unfavorable international economical context together with

  14. Assessment of the forest landscape along selected motor vehicle routes

    Directory of Open Access Journals (Sweden)

    Janeczko Emilia

    2016-03-01

    Full Text Available This paper presents the results of research that aims to analyse and evaluate the attractiveness of the forest landscape in the vicinity of selected motor vehicle routes that differ in terms of technical parameters, such as motorways, regional roads and local (municipal roads. The diversity of landscape units was used as the measure of landscape attractiveness. Landscape diversity analysis allows to establish the details related to specific parts of the road and the options for configuring the road environment. These options relate to the way the forest is managed and mainly involve aspects of infrastructure and cultivation. They include activities such as afforestation work and rebuilding the species composition of forest stands. According to the research, the lower the technical class of a road, the greater is the need to take action to adapt the structural-tree stand system to meet the safety requirements of road users.

  15. Obstructive sleep apnoea, motor vehicle accidents, and work performance.

    Science.gov (United States)

    Sanna, Antonio

    2013-02-01

    The obstructive sleep apnoea (OSA) shows a very high prevalence in the middle-age work force population and, between all diseases and medical conditions, is the major risk factor for motor vehicle accidents (MVAs). OSA can be diagnosed and treated, with resultant reduction in MVAs to those seen in the healthy population. It is increasing evidence that it is a major risk factor for occupational accidents also in fields different from the professional transport and for work disability. It is likely that the treatment of OSA results in the reduction of occupational accidents and work performance improvement with expected benefits in work processes and business in general. It is therefore advisable to develop strategies for screening and treatment of OSA in workers. The risk assessment of OSA in workers may also help to reduce the burden on national health care systems.

  16. Heavy-duty engine testing report-correlation testing of GMC (General Motors Corporation) 5. 7l/MVMA engine. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Jones, L.

    1988-06-01

    The correlation between the heavy-duty test facilities of a manufacturer and the Environmental Protection Agency Motor Vehicle Emission Laboratory (MVEL) is of significant interest to both the manufacturer and EPA. It is especially important from a regulatory standpoint because of Selective Enforcement Audit (SEA) testing requirements. Thus, EPA/MVEL conducted testing on a Chevrolet heavy-duty gasoline-fueled engine with the intent of providing correlation data for comparison with similar data developed by laboratories which conduct SEA emissions tests for the manufacturers of heavy-duty gasoline (HDG) engines. The round-robin program was a joint effort on the part of EPA/MVEL and the Motor Vehicle Manufacturers Association (MVMA).

  17. Sleep disorders as a cause of motor vehicle collisions

    Directory of Open Access Journals (Sweden)

    Marco Túlio de Mello

    2013-01-01

    Full Text Available Studies have shown that a large proportion of traffic accidents around the world are related to inadequate or disordered sleep. Recent surveys have linked driver fatigue to 16% to 20% of serious highway accidents in the UK, Australia, and Brazil. Fatigue as a result of sleep disorders (especially obstructive sleep apnea, excessive workload and lack of physical and mental rest, have been shown to be major contributing factors in motor vehicle accidents. A number of behavioral, physiological, and psychometric tests are being used increasingly to evaluate the impact of fatigue on driver performance. These include the oculography, polysomnography, actigraphy, the maintenance of wakefulness test, and others. Various strategies have been proposed for preventing or reducing the impact of fatigue on motor vehicle accidents. These have included: Educational programs emphasizing the importance of restorative sleep and the need for drivers to recognize the presence of fatigue symptoms, and to determine when to stop to sleep; The use of exercise to increase alertness and to promote restorative sleep; The use of substances or drugs to promote sleep or alertness (i.e. caffeine, modafinil, melatonin and others, as well as specific sleep disorders treatment; The use of CPAP therapy for reducing excessive sleepiness among drivers who have been diagnosed with obstructive sleep apnea. The evidence cited in this review justifies the call for all efforts to be undertaken that may increase awareness of inadequate sleep as a cause of traffic accidents. It is strongly recommended that, for the purpose of promoting highway safety and saving lives, all disorders that cause excessive sleepiness should be investigated and monitored.

  18. Driver sleepiness and risk of motor vehicle crash injuries: a population-based case control study in Fiji (TRIP 12).

    Science.gov (United States)

    Herman, Josephine; Kafoa, Berlin; Wainiqolo, Iris; Robinson, Elizabeth; McCaig, Eddie; Connor, Jennie; Jackson, Rod; Ameratunga, Shanthi

    2014-03-01

    Published studies investigating the role of driver sleepiness in road crashes in low and middle-income countries have largely focused on heavy vehicles. We investigated the contribution of driver sleepiness to four-wheel motor vehicle crashes in Fiji, a middle-income Pacific Island country. The population-based case control study included 131 motor vehicles involved in crashes where at least one person died or was hospitalised (cases) and 752 motor vehicles identified in roadside surveys (controls). An interviewer-administered questionnaire completed by drivers or proxies collected information on potential risks for crashes including sleepiness while driving, and factors that may influence the quantity or quality of sleep. Following adjustment for confounders, there was an almost six-fold increase in the odds of injury-involved crashes for vehicles driven by people who were not fully alert or sleepy (OR 5.7, 95%CI: 2.7, 12.3), or those who reported less than 6 h of sleep during the previous 24 h (OR 5.9, 95%CI: 1.7, 20.9). The population attributable risk for crashes associated with driving while not fully alert or sleepy was 34%, and driving after less than 6 h sleep in the previous 24 h was 9%. Driving by people reporting symptoms suggestive of obstructive sleep apnoea was not significantly associated with crash risk. Driver sleepiness is an important contributor to injury-involved four-wheel motor vehicle crashes in Fiji, highlighting the need for evidence-based strategies to address this poorly characterised risk factor for car crashes in less resourced settings. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

  19. Motion Analysis of an Electric Vehicle with Two Independent Drive Motors

    Institute of Scientific and Technical Information of China (English)

    陈勇; 陈全世; 孙逢春

    2004-01-01

    Motion analyses are performed with the help of stability and simulation analysis, which can provide theoretical bases for applications of an electric vehicle with two independent drive motors. Compared with one-motor drive electric vehicle, the two-motor drive electric vehicle has the advantage of easy layout, simple power train and good drivability and handling characteristics. Analysis shows the method connecting armatures of two DC motors in parallel can function as mechanical differential without a steering sensor, which can simplify structure and increase reliability of the controller. Computer simulations and experiment are carried out to verify conclusions.

  20. Carbonyl Emissions from Gasoline and Diesel Motor Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Destaillats, Hugo; Jakober, Chris A.; Robert, Michael A.; Riddle, Sarah G.; Destaillats, Hugo; Charles, M. Judith; Green, Peter G.; Kleeman, Michael J.

    2007-12-01

    Carbonyls from gasoline powered light-duty vehicles (LDVs) and heavy-duty diesel powered vehicles (HDDVs) operated on chassis dynamometers were measured using an annular denuder-quartz filter-polyurethane foam sampler with O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine derivatization and chromatography-mass spectrometry analyses. Two internal standards were utilized based on carbonyl recovery, 4-fluorobenzaldehyde for_C8 compounds. Gas- and particle-phase emissions for 39 aliphatic and 20 aromatic carbonyls ranged from 0.1 ? 2000 ?g/L fuel for LDVs and 1.8 - 27000 mu g/L fuel for HDDVs. Gas-phase species accounted for 81-95percent of the total carbonyls from LDVs and 86-88percent from HDDVs. Particulate carbonyls emitted from a HDDV under realistic driving conditions were similar to concentrations measured in a diesel particulate matter (PM) standard reference material. Carbonyls accounted for 19percent of particulate organic carbon (POC) emissions from low-emission LDVs and 37percent of POC emissions from three-way catalyst equipped LDVs. This identifies carbonyls as one of the largest classes of compounds in LDV PM emissions. The carbonyl fraction of HDDV POC was lower, 3.3-3.9percent depending upon operational conditions. Partitioning analysis indicates the carbonyls had not achieved equilibrium between the gas- and particle-phase under the dilution factors of 126-584 used in the current study.

  1. Research on motor braking-based DYC strategy for distributed electric vehicle

    Science.gov (United States)

    Zhang, Jingming; Liao, Weijie; Chen, Lei; Cui, Shumei

    2017-08-01

    In order to bring into full play the advantages of motor braking and enhance the handling stability of distributed electric vehicle, a motor braking-based direct yaw moment control (DYC) strategy was proposed. This strategy could identify whether a vehicle has under-steered or overs-steered, to calculate the direct yaw moment required for vehicle steering correction by taking the corrected yaw velocity deviation and slip-angle deviation as control variables, and exert motor braking moment on the target wheels to perform correction in the manner of differential braking. For validation of the results, a combined simulation platform was set up finally to simulate the motor braking control strategy proposed. As shown by the results, the motor braking-based DYC strategy timely adjusted the motor braking moment and hydraulic braking moment on the target wheels, and corrected the steering deviation and sideslip of the vehicle in unstable state, improving the handling stability.

  2. Heavy vehicle state estimation and rollover risk evaluation using Kalman Filter and Sliding Mode Observer

    OpenAIRE

    DAKHLALLAH, Jamil; Imine, Hocine; Sellami, Yamine; BELLOT, D

    2007-01-01

    Safety driving is due to the prevention of risks situation, one of the important risk is the rollover of a heavy vehicle. Preventing this accident requires the knowledge of the rollover coefficient which depends on the vehicle dynamic state and other vehicle parameters. Thus, we estimate the vehicle dynamic state using the Extended and Unscented Kalman Filter and the Sliding Mode Observer. Thereafter, we calculate the probability to have a rollover risk using the previous result and Monte-Car...

  3. Study on the ride comfort of vehicles driven by in-wheel motors

    Directory of Open Access Journals (Sweden)

    Liqiang Jin

    2016-02-01

    Full Text Available Vehicles driven by in-wheel motors have received more and more attention. However, due to the introduction of in-wheel motors, the ratio between unsprung and sprung mass is increased. In this article, to study the influence of this change on ride comfort of vehicles driven by in-wheel motors, an 11 degrees of freedom of vehicle ride comfort model will be presented and studied with MATLAB/Simulink. Then, road tests will be conducted to corroborate the simulation results. It can be obtained that the vehicle ride comfort becomes poor with the increasing unsprung mass. Finally, semi-active air-suspension proportional–integral–derivative control system will be proposed to improve the vehicle ride comfort. Through the simulation results, one can come to a conclusion that the proportional–integral–derivative control system for air suspension is feasible and effective to improve the ride comfort of the vehicles driven by in-wheel motors.

  4. United States commitment to heavy lift launch vehicles

    Science.gov (United States)

    Gabris, Edward A.

    Observers of the United States' space program will note progress toward the development of a new launch system capable of supporting the nation's future space missions. The process of defining mission requirements, developing technically and politically acceptable solutions, making policy decisions, and developing budget support in a democratic society is protracted, but eventually yields decisions that represent the public interest. The consensus developing within the United States on a new launch capability including heavy-lift is embodied in the Joint NASA/DoD National Launch System. This launch vehicle concept has emerged after more than five years of studies by NASA, the DoD and every major industrial aerospace contractor in the U.S. In July 1991, Vice President Quayle, in his capacity as Chairman of the National Space Council stated the Nation's commitment to support of the NLS. This paper reviews progress to date, and the involvement of the four major constituencies; the Executive Branch operating through the National Space Council, the Legislative Branch, the various elements of the DoD, and NASA. The evolution of launch system "requirements", along with the form, content and rationale for the various decisions that have been made will be described and discussed.

  5. Proceedings of the heavy lift launch vehicle tropospheric effects workshop

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    A workshop, sponsored by the Argonne National Laboratory, on Heavy Lift Launch Vehicle (HLLV) troposheric effects was held in Chicago, Illinois, on September 12, 13, and 14, 1978. Briefings were conducted on the latest HLLV congigurations, launch schedules, and proposed fuels. The geographical, environmental, and ecological background of three proposed launch sites were presented in brief. The sites discussed were launch pads near the Kennedy Space Center (KSC), a site in the southwestern United States near Animus, New Mexico, and an ocean site just north of the equator off the coast of Ecuador. A review of past efforts in atmospheric dynamics modeling, source term prediction, atmospheric effects, cloud rise modeling, and rainout/washout effects for the Space Shuttle tropospheric effects indicated that much of the progress made in these areas has direct applicability to the HLLV. The potential pollutants from the HLLV are different and their chymical interactions with the atmosphere are more complex, but the analytical techniques developed for the Space Shuttle can be applied, with the appropriate modification, to the HLLV. Reviews were presented of the ecological baseline monitoring being performed at KSC and the plant toxicology studies being conducted at North Carolina State. Based on the proposed launch sites, the latest HLLV configuration fuel, and launch schedule, the attendees developed a lit of possible environmental issues associated with the HLLV. In addition, a list of specific recommendations for short- and long-term research to investigate, understand, and possibly mitigate the HLLV environmental impacts was developed.

  6. Performance Analysis of Induction Motor of Electric Vehicle Using Vector control

    Institute of Scientific and Technical Information of China (English)

    Liu ping

    2012-01-01

    According to the principle of Vector controlused in an asyn- chronous motor,a simulation model of the asynchronous motor in elec-tric vehicle and Vectorcontrolsystem was established with Matlab/Simu-link software. Simulation analysis of the asynchronous motor driving an electric vehicle was performedunder the classic mode of EV , and the simulation results show the modeland control scheme has better stable and dynamic performance,whichcanbe a good candidate for electric ve- hicle propulsion system

  7. 75 FR 6123 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

    Science.gov (United States)

    2010-02-08

    ... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AK57 Federal Motor Vehicle Safety... final rule that amended the child restraint systems (CRSs) prescribed in Appendix A of Federal Motor... Manufacturers (Alliance),\\5\\ Ford Motor Company (Ford), Evenflo Company, Incorporated (Evenflo), IEE S.A....

  8. 49 CFR 325.13 - Inspection and examination of motor vehicles.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Inspection and examination of motor vehicles. 325... MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL REGULATIONS COMPLIANCE WITH INTERSTATE MOTOR CARRIER NOISE EMISSION STANDARDS Administrative Provisions § 325.13 Inspection...

  9. 75 FR 47720 - Final Theft Data; Motor Vehicle Theft Prevention Standard

    Science.gov (United States)

    2010-08-09

    ... QUATTRO... 8 6992 1.1442 111 VOLKSWAGEN GOLF/RABBIT/GTI...... 46 41314 1.1134 112 GENERAL MOTORS... GENERAL MOTORS........ BUICK RENDEZVOUS..... 14 29187 0.4797 176 VOLKSWAGEN NEW BEETLE 13 27249 0.4771 177... National Highway Traffic Safety Administration 49 CFR Part 541 Final Theft Data; Motor Vehicle Theft...

  10. 77 FR 70914 - Federal Motor Vehicle Safety Standards; Side Impact Protection

    Science.gov (United States)

    2012-11-28

    ... longitudinal centerline and the same distance from the vehicle's longitudinal centerline, within 10 mm ( 0.4 in... National Highway Traffic Safety Administration 49 CFR Part 571 RIN 2127-AK82 Federal Motor Vehicle Safety... vehicle safety standard for side impact protection. In today's document, we correct a minor error in...

  11. The impact of mental health symptoms on heavy goods vehicle drivers' performance.

    Science.gov (United States)

    Hilton, Michael F; Staddon, Zoe; Sheridan, Judith; Whiteford, Harvey A

    2009-05-01

    High levels of psychological distress in fulltime employees are prevalent (4.5% per month). Symptoms of impaired mental health include difficulties with attention, concentration, motivation, decision-making, visuo-motor control, and psychomotor reaction times. There is limited research on the impact these symptoms have on heavy goods vehicle (HGV) drivers' performance. In this study 1324 HGV drivers were surveyed using the Depression, Anxiety, Stress Scale (DASS) and the Health and Performance at Work Questionnaire (HPQ). Depression, anxiety and stress had little effect on driver absenteeism rates or self-rated driving performance. However, severe (1.5% of drivers) and very severe (1.8% of drivers) depression was associated with an increased odds ratio (OR=4.5 and 5.0, respectively) for being involved in an accident or near miss in the past 28 days. This odd ratio is akin to driving with a blood alcohol content of about 0.08%. Given the number of HGV vehicles and the prevalence of depression this equates to 10,950 HGV drivers with an increased statistical risk of an accident or near miss. As the impact of HGV accidents is potentially large, including loss of life, it would be sensible to extend the research findings here into an action plan.

  12. Risk assessment in ramps for heavy vehicles--A French study.

    Science.gov (United States)

    Cerezo, Veronique; Conche, Florence

    2016-06-01

    This paper presents the results of a study dealing with the risk for heavy vehicles in ramps. Two approaches are used. On one hand, statistics are applied on several accidents databases to detect if ramps are more risky for heavy vehicles and to define a critical value for longitudinal slope. χ(2) test confirmed the risk in ramps and statistical analysis proved that a longitudinal slope superior to 3.2% represents a higher risk for heavy vehicles. On another hand, numerical simulations allow defining the speed profile in ramps for two types of heavy vehicles (tractor semi-trailer and 2-axles rigid body) and different loads. The simulations showed that heavy vehicles must drive more than 1000 m on ramps to reach their minimum speed. Moreover, when the slope is superior to 3.2%, tractor semi-trailer presents a strong decrease of their speed until 50 km/h. This situation represents a high risk of collision with other road users which drive at 80-90 km/h. Thus, both methods led to the determination of a risky configuration for heavy vehicles: ramps with a length superior to 1000 m and a slope superior to 3.2%. An application of this research work concerns design methods and guidelines. Indeed, this study provides threshold values than can be used by engineers to make mandatory specific planning like a lane for slow vehicles.

  13. Investigation of Control Model in a New Series Hybrid Hydraulic/Electric System for Heavy Vehicles Based on Energy Efficiency

    Directory of Open Access Journals (Sweden)

    Soroosh Mahmoodi

    2016-01-01

    Full Text Available An interesting model which was able to recuperate and reuse braking energy was investigated. It was named series hybrid hydraulic/electric system (SHHES. The innovated model was presented for heavy hybrid vehicles to overcome the existing drawbacks of single energy storage sources. The novelty of this paper was investigation of a new series hybrid vehicle with triple sources, combustion engine, electric motor, and hydraulic sources. It was simulated with MATLAB-Simulink and different operational mode of control system was investigated. The aim was to improve the efficiency of the energy-loading components in the power train system and the transmission system independently. The ability to store and reuse the kinetic energy was added to the system to prevent energy wasting while the vehicle was braking. Control models were also investigated to realize suitable control algorithms to offer the best efficiency in system components for different vehicle conditions. The torque control strategy based on fuzzy logic controller was proposed to achieve better vehicle performance while the fuel consumption was minimized. The results implied efficient storage and usage in the transmission system. A small vehicle model experimentally verified the simulation results.

  14. 40 CFR 80.520 - What are the standards and dye requirements for motor vehicle diesel fuel?

    Science.gov (United States)

    2010-07-01

    ... requirements for motor vehicle diesel fuel? 80.520 Section 80.520 Protection of Environment ENVIRONMENTAL... Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Motor Vehicle Diesel Fuel Standards and Requirements § 80.520 What are the standards and dye requirements for motor vehicle...

  15. 40 CFR 80.581 - What are the batch testing and sample retention requirements for motor vehicle diesel fuel, NRLM...

    Science.gov (United States)

    2010-07-01

    ... retention requirements for motor vehicle diesel fuel, NRLM diesel fuel, and ECA marine fuel? 80.581 Section...) REGULATION OF FUELS AND FUEL ADDITIVES Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel... requirements for motor vehicle diesel fuel, NRLM diesel fuel, and ECA marine fuel? (a) Beginning on June......

  16. 40 CFR 80.552 - What compliance options are available to motor vehicle diesel fuel small refiners?

    Science.gov (United States)

    2010-07-01

    ... to motor vehicle diesel fuel small refiners? 80.552 Section 80.552 Protection of Environment... Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Small Refiner Hardship Provisions § 80.552 What compliance options are available to motor vehicle diesel...

  17. 40 CFR 80.524 - What sulfur content standard applies to motor vehicle diesel fuel downstream of the refinery or...

    Science.gov (United States)

    2010-07-01

    ... to motor vehicle diesel fuel downstream of the refinery or importer? 80.524 Section 80.524 Protection... FUELS AND FUEL ADDITIVES Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Motor Vehicle Diesel Fuel Standards and Requirements § 80.524 What sulfur content...

  18. 40 CFR 80.590 - What are the product transfer document requirements for motor vehicle diesel fuel, NRLM diesel...

    Science.gov (United States)

    2010-07-01

    ... requirements for motor vehicle diesel fuel, NRLM diesel fuel, heating oil, ECA marine fuel, and other... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Motor Vehicle Diesel Fuel; Nonroad, Locomotive... the product transfer document requirements for motor vehicle diesel fuel, NRLM diesel fuel,...

  19. 40 CFR 80.593 - What are the reporting requirements for refiners and importers of motor vehicle diesel fuel...

    Science.gov (United States)

    2010-07-01

    ... for refiners and importers of motor vehicle diesel fuel subject to temporary refiner relief standards... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Motor Vehicle Diesel Fuel; Nonroad, Locomotive... the reporting requirements for refiners and importers of motor vehicle diesel fuel subject...

  20. 77 FR 73459 - California State Motor Vehicle Pollution Control Standards; Notice of Waiver of Clean Air Act...

    Science.gov (United States)

    2012-12-10

    ... AGENCY California State Motor Vehicle Pollution Control Standards; Notice of Waiver of Clean Air Act..., challenging the need for CARB's own motor vehicle pollution control program based on lack of compelling and... Administrator shall waive preemption for California to enforce new motor vehicle emissions standards and...

  1. 40 CFR 80.500 - What are the implementation dates for the motor vehicle diesel fuel sulfur control program?

    Science.gov (United States)

    2010-07-01

    ... the motor vehicle diesel fuel sulfur control program? 80.500 Section 80.500 Protection of Environment... Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel General Information § 80.500 What are the implementation dates for the motor vehicle diesel fuel sulfur control...

  2. FY2003 Annual Report: DOE Project on Heavy Vehicle Aerodynamic Drag

    Energy Technology Data Exchange (ETDEWEB)

    McCallen, R C; Salari, K; Ortega, J; DeChant, L J; Roy, C J; Payne, J J; Hassan, B; Pointer, W D; Browand, F; Hammache, M; Hsu, T; Ross, J; Satran, D; Heineck, J; Walker, S; Yaste, D; Englar, R; Leonard, A; Rubel, M; Chatelain, P

    2003-10-24

    Objective: {sm_bullet} Provide guidance to industry in the reduction of aerodynamic drag of heavy truck vehicles. {sm_bullet} Establish a database of experimental, computational, and conceptual design information, and demonstrate potential of new drag-reduction devices.

  3. Large-eddy simulation of a turbulent flow over a heavy vehicle with drag reduction devices

    Science.gov (United States)

    Lee, Sangseung; Kim, Myeongkyun; You, Donghyun

    2015-11-01

    Aerodynamic drag contributes to a considerable amount of energy loss of heavy vehicles. To reduce the energy loss, drag reduction devices such as side skirts and boat tails, are often installed to the side and the rear of a heavy vehicle. In the present study, turbulent flow around a heavy vehicle with realistic geometric details is simulated using large-eddy simulation (LES), which is capable of providing unsteady flow physics responsible for aerodynamic in sufficient detail. Flow over a heavy vehicle with and without a boat tail and side skirts as drag reduction devices is simulated. The simulation results are validated against accompanying in-house experimental measurements. Effects of a boat tail and side skirts on drag reduction are discussed in detail. Supported by the Korea Agency for Infrastructure Technology Advancement (KAIA) Grant NTIS 1615007940.

  4. Road Transport Management System (RTMS): a self regulation initiative in heavy vehicle transport in South Africa

    CSIR Research Space (South Africa)

    Nordengen, Paul A

    2007-07-01

    Full Text Available ' efforts to address heavy vehicle overloading and road safety, which continiue to be the major problems on South African roads despite efforts for more effective enforcement by the road and traffic authorities....

  5. Aggregate strength for bituminous surfacings for low volume roads: a heavy vehicle simulator experience

    CSIR Research Space (South Africa)

    Paige-Green, P

    2004-09-01

    Full Text Available This paper discusses an investigation using the CSIR Transportek Heavy Vehicle Simulator (HVS) to determine the impact of using aggregates softer than specified in chip seals and to propose possible relaxations in the currently specified strength...

  6. Heavy and Overweight Vehicle Brake Testing: Five-Axle Combination Tractor-Flatbed Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Lascurain, Mary Beth [ORNL; Capps, Gary J [ORNL; Franzese, Oscar [ORNL

    2013-10-01

    The Federal Motor Carrier Safety Administration, in coordination with the Federal Highway Administration, sponsored the Heavy and Overweight Vehicle Brake Testing (HOVBT) program in order to provide information about the effect of gross vehicle weight (GVW) on braking performance. Because the Federal Motor Carrier Safety Regulations limit the number of braking system defects that may exist for a vehicle to be allowed to operate on the roadways, the examination of the effect of brake defects on brake performance for increased loads is also relevant. The HOVBT program seeks to provide relevant information to policy makers responsible for establishing load limits, beginning with providing test data for a combination tractor/trailer. This testing was conducted on a five-axle combination vehicle with tractor brakes meeting the Reduced Stopping Distance requirement rulemaking. This report provides a summary of the testing activities, the results of various analyses of the data, and recommendations for future research. Following a complete brake rebuild, instrumentation, and brake burnish, stopping tests were performed from 20 and 40 mph with various brake application pressures (15 psi, 25 psi, 35 psi, 45 psi, 55 psi, and full system pressure). These tests were conducted for various brake conditions at the following GVWs: 60,000, 80,000, 91,000, 97,000, 106,000, and 116,000 lb. The 80,000-lb GVWs included both balanced and unbalanced loads. The condition of the braking system was also varied. To introduce these defects, brakes (none, forward drive axle, or rear trailer axle) were made inoperative. In addition to the stopping tests, performance-based brake tests were conducted for the various loading and brake conditions. Analysis of the stopping test data showed the stopping distance to increase with load (as expected) and also showed that more braking force was generated by the drive axle brakes than the trailer axle brakes. The constant-pressure stopping test data

  7. Law enforcement officers' risk perceptions toward on-duty motor-vehicle events.

    Science.gov (United States)

    Tiesman, Hope M; Heick, Rebecca J; Konda, Srinivas; Hendricks, Scott

    Motor-vehicle-related events (MVEs) are the leading cause of on-duty death for law enforcement officers, yet little is known about how officers view this significant job hazard. The purpose of this paper is to explore officers' motor-vehicle risk perception and examine how prior on-duty MVEs and the death or injury of a fellow officer influences this perception. A state-wide random sample of 136 law enforcement agencies was drawn using publically accessible databases, stratified on type and size of agency. In total, 60 agencies agreed to participate and a cross-sectional questionnaire was distributed to 1,466 officers. Using six-point Likert scales, composite scores for motor-vehicle and intentional violence risk perception were derived. A linear regression multivariable model was used to examine factors affecting motor-vehicle risk perception. Motor-vehicle risk perception scores were significantly higher than intentional violence scores. A prior on-duty motor-vehicle crash, prior roadside incident, or knowledge of fellow officer's injury or death from a MVE significantly increased motor-vehicle risk perception scores. After controlling for potential confounders though, only prior on-duty crashes and roadside incidents impacted motor-vehicle risk perception. The study comprised primarily small, rural agencies and generalizability may be limited. Also, although the data were collected anonymously, reporting and response biases may affect these findings. This study involved a large and diverse cohort of officers and explored motor-vehicle risk perception. A better understanding of officers' risk perceptions will assist in the development and implementation of occupational injury prevention programs, training, and policy.

  8. Cyclic Parameter Refinement of 4S-10 Hybrid Flux-Switching Motor for Lightweight Electric Vehicle

    Science.gov (United States)

    Rani, J. Abd; Sulaiman, E.; Kumar, R.

    2017-08-01

    A great deal of attention has been given to the reduction of lighting the vehicle because the lighter the vehicle the energy consumption is comparatively low. Hence, the lightweight electric vehicle was introduced for lower carbon footprint and the sizing of the vehicle itself. One of the components to reduce the weight of the vehicle is the propulsion system which comprised of electric motor functioning as the source of torque to drive the propulsion system of the machine. This paper presents the refinement methodology for the optimized design of the 4S-10P E-Core hybrid excitation flux switching motor. The purpose of the refinement methodology is to improve the torque production of the optimized motor. The result of the successful improvement of the torque production is justifiable for a lightweight electric vehicle to drive the propulsion system.

  9. Autonomous prediction of performance-based standards for heavy vehicles

    CSIR Research Space (South Africa)

    Berman, R

    2015-11-01

    Full Text Available determined by physical testing or detailed vehicle simulations, both of which are costly and time consuming processes. This paper presents a data driven, detailed model to predict the low-speed performance of an articulated vehicle, given only the vehicle...

  10. Summary of electric vehicle dc motor-controller tests

    Science.gov (United States)

    Mcbrien, E. F.; Tryon, H. B.

    1982-01-01

    The differences in the performance of dc motors are evaluated when operating with chopper type controllers, and when operating on direct current. The interactions between the motor and the controller which cause these differences are investigated. Motor-controlled tests provided some of the data the quantified motor efficiency variations for both ripple free and chopper modes of operation.

  11. 40 CFR 86.1817-08 - Complete heavy-duty vehicle averaging, trading, and banking program.

    Science.gov (United States)

    2010-07-01

    ..., trading, and banking program. 86.1817-08 Section 86.1817-08 Protection of Environment ENVIRONMENTAL... Complete heavy-duty vehicle averaging, trading, and banking program. Section 86.1817-08 includes text that...-cycle vehicles may participate in an NMHC averaging, banking and trading program to show compliance with...

  12. 77 FR 39206 - Public Hearing on Proposed Rule for Heavy Vehicle Electronic Stability Control Systems

    Science.gov (United States)

    2012-07-02

    ... Vehicle Electronic Stability Control Systems AGENCY: National Highway Traffic Safety Administration (NHTSA... No. 136, Electronic Stability Control Systems for Heavy Vehicles (77 FR 30766). The standard would... kilograms (26,000 pounds), to be equipped with an electronic stability control (ESC) system that meets...

  13. Heavy vehicle simulation and validation for handling and roll-over using integrated development tools

    NARCIS (Netherlands)

    Lupker, H.A.; Vink, W.J.; Besselink, I.J.M.

    1999-01-01

    A systematic modelling approach to vehicle dynamics simulation, validation and optimization is presented using an effective link between a multibody solver and a mathematical analysis package. In particular, a heavy vehicle tractor/trailer combination which is common on European roads is modelled an

  14. Evaluation of a performance-based standards approach to heavy vehicle design to reduce pavement wear

    CSIR Research Space (South Africa)

    Nordengen, Paul A

    2013-11-01

    Full Text Available Research (CSIR) as a research area warranting funding because of the potential benefits in terms of transport efficiency, road/vehicle safety and the protection of road infrastructure. Whereas most countries throughout the world regulate heavy vehicle use...

  15. Aeromechanical stability analysis of a multirotor vehicle model representing a hybrid heavy lift airship (HHLA)

    Science.gov (United States)

    Venkatesan, C.; Friedmann, P. P.

    1984-01-01

    Hybrid Heavy Lift Airship (HHLA) is a proposed candidate vehicle aimed at providing heavy lift capability at low cost. This vehicle consists of a buoyant envelope attached to a supporting structure to which four rotor systems, taken from existing helicopters are attached. Nonlinear equations of motion capable of modelling the dynamics of this coupled multi-rotor/support frame/vehicle system have been developed. Using these equations of motion the aeroelastic and aeromechanical stability analysis is performed aimed at identifying potential instabilities which could occur for this type of vehicle. The coupling between various blade, supporting structure and rigid body modes is identified. Furthermore, the effects of changes in buoyancy ratio (Buoyant lift/total weight) on the dynamic characteristics of the vehicle are studied. The dynamic effects found are of considerable importance for the design of such vehicles. The analytical model developed is also useful for studying the aeromechanical stability of single rotor and tandem rotor coupled rotor/fuselage systems.

  16. Aeromechanical stability analysis of a multirotor vehicle with application to hybrid heavy lift helicopter dynamics

    Science.gov (United States)

    Venkatesan, C.; Friedmann, P. P.

    1984-01-01

    The Hybrid Heavy Lift Helicopter (HHLH) is a potential candidate vehicle aimed at providing heavy lift capability at low cost. This vehicle consists of a buoyant envelope attached to a supporting structure. Four rotor systems are also attached to the supporting structure. Nonlinear equations of motion capable of modeling the dynamics of this multi-rotor/support frame/vehicle system have been developed and used to study the fundamental aeromechanical stability characteristics of this class of vehicles. The mechanism of coupling between the blades, supporting structure and rigid body modes is identified and the effect of buoyancy ratio (buoyant lift/total weight) on the vehicle dynamics is studied. It is shown that dynamics effects have a major role in the design of such vehicles. The analytical model developed is also useful for studying the aeromechanical stability of single rotor and tandem rotor coupled rotor/fuselage systems.

  17. Aeromechanical stability analysis of a multirotor vehicle with application to hybrid heavy lift helicopter dynamics

    Science.gov (United States)

    Venkatesan, C.; Friedmann, P. P.

    1984-01-01

    The Hybrid Heavy Lift Helicopter (HHLH) is a potential candidate vehicle aimed at providing heavy lift capability at low cost. This vehicle consists of a buoyant envelope attached to a supporting structure. Four rotor systems are also attached to the supporting structure. Nonlinear equations of motion capable of modeling the dynamics of this multi-rotor/support frame/vehicle system have been developed and used to study the fundamental aeromechanical stability characteristics of this class of vehicles. The mechanism of coupling between the blades, supporting structure and rigid body modes is identified and the effect of buoyancy ratio (buoyant lift/total weight) on the vehicle dynamics is studied. It is shown that dynamics effects have a major role in the design of such vehicles. The analytical model developed is also useful for studying the aeromechanical stability of single rotor and tandem rotor coupled rotor/fuselage systems.

  18. Safety restraint injuries in fatal motor vehicle collisions.

    Science.gov (United States)

    Chase, J; Donaldson, L; Duflou, J; Gorrie, C

    2007-12-01

    The presence of an apparent seat belt mark (SBM) on a car crash occupant is often used as evidence for use of a seat belt at the time of the crash and, conversely, the lack of a SBM is used as an indication that no seat belt was used. This study examined whether there are clear indications of seat belt use to be found at autopsy and evaluated the sensitivity and specificity of apparent SBM and whether the use of a seat belt and seating location affects the type and severity of injuries sustained. Information on the type of injuries sustained and seatbelt use was retrieved from autopsy reports and police reports, respectively, for cases of fatal motor vehicle collisions occurring in Sydney, Australia over a 5-year period. In this study, a SBM was only found on restrained occupants. The proportion of restrained occupants with evidence of a SBM was 36% (sensitivity), whilst unrestrained occupants showed no evidence of a SBM (100% specificity). A SBM was also found to reliably reflect the seating position of the occupant. We conclude that restrained occupants can be expected to show evidence of the seat belt in just over one third of cases and that the absence of a SBM is not necessarily an indication that no seat belt was used. Spurious SBM is very unlikely to be present if the occupant was unrestrained.

  19. Motor vehicle accidents: How should cirrhotic patients be managed?

    Science.gov (United States)

    Kawaguchi, Takumi; Taniguchi, Eitaro; Sata, Michio

    2012-01-01

    Motor vehicle accidents (MVAs) are serious social issues worldwide and driver illness is an important cause of MVAs. Minimal hepatic encephalopathy (MHE) is a complex cognitive dysfunction with attention deficit, which frequently occurs in cirrhotic patients independent of severity of liver disease. Although MHE is known as a risk factor for MVAs, the impact of diagnosis and treatment of MHE on MVA-related societal costs is largely unknown. Recently, Bajaj et al demonstrated valuable findings that the diagnosis of MHE by rapid screening using the inhibitory control test (ICT), and subsequent treatment with lactulose could substantially reduce the societal costs by preventing MVAs. Besides the ICT and lactulose, there are various diagnostic tools and therapeutic strategies for MHE. In this commentary, we discussed a current issue of diagnostic tools for MHE, including neuropsychological tests. We also discussed the advantages of the other therapeutic strategies for MHE, such as intake of a regular breakfast and coffee, and supplementation with zinc and branched chain amino acids, on the MVA-related societal costs. PMID:22690067

  20. Motor vehicle accidents: How should cirrhotic patients be managed?

    Institute of Scientific and Technical Information of China (English)

    Takumi Kawaguchi; Eitaro Taniguchi; Michio Sata

    2012-01-01

    Motor vehicle accidents (MVAs) are serious social issues worldwide and driver illness is an important cause of MVAs.Minimal hepatic encephalopathy (MHE) is a complex cognitive dysfunction with attention deficit,which frequently occurs in cirrhotic patients independent of severity of liver disease.Although MHE is known as a risk factor for MVAs,the impact of diagnosis and treatment of MHE on MVA-related societal costs is largely unknown.Recently,Bajaj et al demonstrated valuable findings that the diagnosis of MHE by rapid screening using the inhibitory control test (ICT),and subsequent treatment with lactulose could substantially reduce the societal costs by preventing MVAs,Besides the ICT and lactulose,there are various diagnostic tools and therapeutic strategies for MHE.In this commentary,we discussed a current issue of diagnostic tools for MHE,including neuropsychological tests.We also discussed the advantages of the other therapeutic strategies for MHE,such as intake of a regular breakfast and coffee,and supplementation with zinc and branched chain amino acids,on the MVA-related societal costs.

  1. Road transport management system: a self regulation initiative to promote load optimisation, vehicle maintenance and driver wellness in heavy vehicle transport in South Africa

    CSIR Research Space (South Africa)

    Nordengen, Paul A

    2008-04-01

    Full Text Available vehicle transport industry through a Road Transport Management System (RTMS) with the aim of contributing to the road authorities’ efforts to address the above problems. During 2003 a heavy vehicle accreditation scheme was developed and implemented...

  2. Self-regulation of motor vehicle advertising: is it working in Australia?

    Science.gov (United States)

    Donovan, Robert J; Fielder, Lynda J; Ouschan, Robyn; Ewing, Michael

    2011-05-01

    There is growing concern that certain content within motor vehicle advertising may have a negative influence on driving attitudes and behaviours of viewers, particularly young people, and hence a negative impact on road safety. In response, many developed countries have adopted a self-regulatory approach to motor vehicle advertising. However, it appears that many motor vehicle advertisements in Australia and elsewhere are not compliant with self-regulatory codes. Using standard commercial advertising methods, we exposed three motor vehicle ads that had been the subject of complaints to the Australian Advertising Standards Board (ASB) to, N = 463, 14-55 year olds to assess the extent to which their perceptions of the content of the ads communicated themes that were contrary to the Australian self-regulatory code. All three ads were found to communicate messages contrary to the code (such as the vehicle's speed and acceleration capabilities). However, the ASB had upheld complaints about only one of the ads. Where motor vehicle advertising regulatory frameworks exist to guide motor vehicle advertisers as to what is and what is not acceptable in their advertising, greater efforts are needed to ensure compliance with these codes. One way may be to make it mandatory for advertisers to report consumer pre-testing of their advertising to ensure that undesirable messages are not being communicated to viewers.

  3. Quantitative Effects of Vehicle Parameters on Fuel Consumption for Heavy-Duty Vehicle

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Lijuan; Kelly, Kenneth; Walkowicz, Kevin; Duran, Adam

    2015-10-16

    The National Renewable Energy Laboratory's (NREL's) Fleet Test and Evaluations team recently conducted chassis dynamometer tests of a class 8 conventional regional delivery truck over the Heavy Heavy-Duty Diesel Truck (HHDDT), West Virginia University City (WVU City), and Composite International Truck Local and Commuter Cycle (CILCC) drive cycles. A quantitative study was conducted by analyzing the impacts of various factors on fuel consumption (FC) and fuel economy (FE) by modeling and simulating the truck using NREL's Future Automotive Systems Technology Simulator (FASTSim). Factors used in this study included vehicle weight, and the coefficients of rolling resistance and aerodynamic drag. The simulation results from a single parametric study revealed that FC was approximately a linear function of the weight, coefficient of aerodynamic drag, and rolling resistance over various drive cycles. Among these parameters, the truck weight had the largest effect on FC. The study of the impact of two technologies on FE suggested that, depending on the circumstances, it may be more cost effective to reduce one parameter (such as coefficient of aerodynamic drag) to increase fuel economy, or it may be more beneficial to reduce another (such as the coefficient of rolling resistance). It also provided a convenient way to estimate FE by interpolating within the parameter values and extrapolating outside of them. The simulation results indicated that the FC could be reduced from 38.70 L/100 km, 50.72 L/100 km, and 38.42 L/100 km in the baseline truck to 26.78 L/100 km, 43.14 L/100 km and 29.84 L/100 km over the HHDDT, WVU City and CILCC drive cycles, respectively, when the U.S. Department of Energy's three targeted new technologies were applied simultaneously.

  4. World-wide developments in motor vehicle inspection/maintenance (I/M) programs

    Energy Technology Data Exchange (ETDEWEB)

    Klausmeier, R. [Consulting Inc., Austin, TX (United States); Kishan, S. [Radian Corporation, Austin, TX (United States)

    1995-12-31

    Motor vehicles contribute much to urban air pollution. As a result, most governments have enacted emission standards that significantly lower pollutant emission levels from new motor vehicles. For example, vehicles built in the United States emit 95 % fewer pollutants than uncontrolled vehicles when they are new. However, studies indicate that proper maintenance is needed to obtain the full benefit of vehicle emission controls. Furthermore, there is evidence that a significant percentage of the vehicle fleet is not properly maintained. This has led to the creation of motor vehicle Inspection/Maintenance (I/M) Programs. I/M programs inspect vehicles for indications that they are emitting excessive quantities of pollutants. Vehicles that fail the inspection must be repaired in order to comply with program requirements. The first I/M programs were implemented in the United States in the early 1970s. With substantial urging from the federal government, most of the U.S. states with severe air pollution problems have implemented I/M programs. Recently, with the passage of the U.S. Clean Air Act Amendments of 1990, many states have been required to significantly upgrade the performance and coverage of their I/M programs. I/M programs also have been implemented in Europe and recently in Asia. This presentation reviews developments in I/M programs for light-duty gasoline powered vehicles. Developments in I/M programs for diesel powered vehicles are briefly described. (author)

  5. Executive Summary: EPA's Waiver Decision on California's Greenhouse Gas Emission Standards for New Motor Vehicles

    Science.gov (United States)

    This letter from EPA Administrator Stephen Johnson to Governor Schwarzenegger denies California's request for a waiver of Federal preemption for motor vehicle greenhouse gas emission standards submitted by the California Air Resources Board (CARB).

  6. 77 FR 40843 - Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices, and Associated Equipment

    Science.gov (United States)

    2012-07-11

    .... 108; Lamp, Reflective Devices, and Associated Equipment AGENCY: National Highway Traffic Safety.... SUPPLEMENTARY INFORMATION: Federal Motor Vehicle Safety Standard (FMVSS) No. 108, Lamps, reflective devices, and... to vertical aim, luminance of signaling and marking lamps, masking of front turn signals,...

  7. Motor Vehicle Occupant Death Rate, by Age and Gender, 2012 & 2014, All States

    Data.gov (United States)

    U.S. Department of Health & Human Services — Rate of deaths by age/gender (per 100,000 population) for motor vehicle occupants killed in crashes, 2012 & 2014. 2012 Source: Fatality Analysis Reporting System...

  8. Transitioning to Low-GWP Alternatives in Motor Vehicle Air Conditioning Systems

    Science.gov (United States)

    This fact sheet provides information on low-GWP alternatives in newly manufactured motor vehicle air conditioning systems. It discusses HFC alternatives, market trends, challenges to market entry for alternatives, and potential solutions.

  9. Section 609 of the Clean Air Act: Motor Vehicle Air Conditioning

    Science.gov (United States)

    Fact sheet provides a general overview of EPA regulations under Section 609 of the Clean Air Act, which is focused on preventing the release of refrigerants during the servicing of motor vehicle air-conditioning systems and similar appliances.

  10. Motor Vehicle Occupant Death Rate, by Age and Gender, 2012 & 2014, Region 8 - Denver

    Data.gov (United States)

    U.S. Department of Health & Human Services — Rate of deaths by age/gender (per 100,000 population) for motor vehicle occupants killed in crashes, 2012 & 2014. 2012 Source: Fatality Analysis Reporting System...

  11. Motor Vehicle Occupant Death Rate, by Age and Gender, 2012 & 2014, Region 4 - Atlanta

    Data.gov (United States)

    U.S. Department of Health & Human Services — Rate of deaths by age/gender (per 100,000 population) for motor vehicle occupants killed in crashes, 2012 & 2014. 2012 Source: Fatality Analysis Reporting System...

  12. Motor Vehicle Occupant Death Rate, by Age and Gender, 2012 & 2014, Region 6 - Dallas

    Data.gov (United States)

    U.S. Department of Health & Human Services — Rate of deaths by age/gender (per 100,000 population) for motor vehicle occupants killed in crashes, 2012 & 2014. 2012 Source: Fatality Analysis Reporting System...

  13. Motor Vehicle Occupant Death Rate, by Age and Gender, 2012 & 2014, Region 3 - Philadelphia

    Data.gov (United States)

    U.S. Department of Health & Human Services — Rate of deaths by age/gender (per 100,000 population) for motor vehicle occupants killed in crashes, 2012 & 2014. 2012 Source: Fatality Analysis Reporting System...

  14. Motor Vehicle Occupant Death Rate, by Age and Gender, 2012 & 2014, HHS Region 1 - Boston

    Data.gov (United States)

    U.S. Department of Health & Human Services — Rate of deaths by age/gender (per 100,000 population) for motor vehicle occupants killed in crashes, 2012 & 2014. 2012 Source: Fatality Analysis Reporting System...

  15. Motor Vehicle Occupant Death Rate, by Age and Gender, 2012 & 2014, Region 5 - Chicago

    Data.gov (United States)

    U.S. Department of Health & Human Services — Rate of deaths by age/gender (per 100,000 population) for motor vehicle occupants killed in crashes, 2012 & 2014. 2012 Source: Fatality Analysis Reporting System...

  16. Motor Vehicle Occupant Death Rate, by Age and Gender, 2012 & 2014, Region 2 - New York

    Data.gov (United States)

    U.S. Department of Health & Human Services — Rate of deaths by age/gender (per 100,000 population) for motor vehicle occupants killed in crashes, 2012 & 2014. 2012 Source: Fatality Analysis Reporting System...

  17. Motor Vehicle Occupant Death Rate, by Age and Gender, 2012 & 2014, Region 7 - Kansas City

    Data.gov (United States)

    U.S. Department of Health & Human Services — Rate of deaths by age/gender (per 100,000 population) for motor vehicle occupants killed in crashes, 2012 & 2014. 2012 Source: Fatality Analysis Reporting System...

  18. Emission Patterns under Alternative Congestion and Motor Vehicle Pollution Mitigation Policies in Shanghai

    Institute of Scientific and Technical Information of China (English)

    Chen Hongfeng; Li Fen; Li Xiangling

    2007-01-01

    As a megacity with thriving economy, Shanghai is experiencing rapid motorisation and confronted with traffic congestion problems despite its low car ownership. It is of value to look into the policies on emission control of motor vehicle and congestion reduction in such a city to explore how to reconcile mobility enhancement with the environment. Results of a dynamic simulation displayed time paths of emissions from motor vehicles in Shanghai over the period from 2000 to 2020. The simulation results showed that early policies on emission control of motor vehicle could bring about far-reaching effects on emission reduction, and take advantage of available low-polluting technologies and technical innovation over time. Travel demand management would play an important role in curbing congestion and reducing motor vehicle pollution by calming down car ownership rise and deterring inefficient trips as well as reducing fuel waste caused by congestion.

  19. Motor Vehicle Occupant Death Rate, by Age and Gender, 2012 & 2014, Region 9 - San Francisco

    Data.gov (United States)

    U.S. Department of Health & Human Services — Rate of deaths by age/gender (per 100,000 population) for motor vehicle occupants killed in crashes, 2012 & 2014. 2012 Source: Fatality Analysis Reporting System...

  20. Historical review of the use of motorized vehicles on lands administered by Izembek Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The purpose of this report is to review and describe the historical use of motorized vehicles within lands administered by the Izembek National Wildlife Refuge, with...

  1. US Forest Service Motor Vehicle Use Map: Roads and Trails (With Labels)

    Data.gov (United States)

    US Forest Service, Department of Agriculture — A map service on the www depicting Forest Service roads and trails that are designated for motor vehicle use under the official U.S. Government Code of Federal...

  2. 76 FR 54932 - Revisions and Additions to Motor Vehicle Fuel Economy Label; Correction

    Science.gov (United States)

    2011-09-06

    ... 2060-AQ09; RIN 2127-AK73 Revisions and Additions to Motor Vehicle Fuel Economy Label; Correction AGENCY... final rule regarding labeling of cars and trucks with fuel economy and environmental information in the...

  3. Motor Vehicle Occupant Death Rate, by Age and Gender, 2012 & 2014, Region 10 - Seattle

    Data.gov (United States)

    U.S. Department of Health & Human Services — Rate of deaths by age/gender (per 100,000 population) for motor vehicle occupants killed in crashes, 2012 & 2014. 2012 Source: Fatality Analysis Reporting System...

  4. An investigation of the effects of pneumatic actuator design on slip control for heavy vehicles

    Science.gov (United States)

    Miller, Jonathan I.; Cebon, David

    2013-01-01

    Progress in reducing actuator delays in pneumatic brake systems is opening the door for advanced anti-lock braking algorithms to be used on heavy goods vehicles. However, little has been published on slip controllers for air-braked heavy vehicles, or the effects of slow pneumatic actuation on their design and performance. This paper introduces a sliding mode slip controller for air-braked heavy vehicles. The effects of pneumatic actuator delays and flow rates on stopping performance and air (energy) consumption are presented through vehicle simulations. Finally, the simulations are validated with experiments using a hardware-in-the-loop rig. It is shown that for each wheel, pneumatic valves with delays smaller than 3 ms and orifice diameters around 8 mm provide the best performance.

  5. Research on identification method of heavy vehicle rollover based on hidden Markov model

    Science.gov (United States)

    Zhao, Zhiguo; Wang, Yeqin; Hu, Xiaoming; Tao, Yukai; Wang, Jinsheng

    2017-07-01

    Aiming at the problem of early warning credibility degradation as the heavy vehicle load and its center of gravity change greatly; the heavy vehicle rollover state identification method based on the Hidden Markov Model (HMM, is introduced to identify heavy vehicle lateral conditions dynamically in this paper. In this method, the lateral acceleration and roll angle are taken as the observation values of the model base. The Viterbi algorithm is used to predict the state sequence with the highest probability in the observed sequence, and the Markov prediction algorithm is adopted to calculate the state transition law and to predict the state of the vehicle in a certain period of time in the future. According to combination conditions of Double lane change and steering, applying Trucksim and Matlab trained hidden Markov model, the model is applied to the online identification of heavy vehicle rollover states. The identification results show that the model can accurately and efficiently identify the vehicle rollover state, and has good applicability. This study provides a novel method and a general strategy for active safety early warning and control of vehicles, which has reference significance for the application of the Hidden Markov theory in collision, rear-end and lane departure warning system.

  6. Asbestos exposures of mechanics performing clutch service on motor vehicles.

    Science.gov (United States)

    Cohen, Howard J; Van Orden, Drew R

    2008-03-01

    A study was conducted to assess historical asbestos exposures of mechanics performing clutch service on motor vehicles. For most of the 20th century, friction components used in brakes and manual transmission clutches contained approximately 25-60% chrysotile asbestos. Since the late 1960s, asbestos exposure assessment studies conducted on mechanics performing brake service have frequently reported levels below the current OSHA permissible exposure limit (PEL) of 0.1 fiber/cc (flcc). Although there is a robust asbestos exposure data set for mechanics performing brake service, there are almost no data for mechanics removing and replacing clutches in manual transmission vehicles. Personal and area airborne asbestos samples were collected during the removal of asbestos-containing clutches from 15 manual transmissions obtained from salvage facilities by an experienced mechanic. Clutch plates and debris were analyzed for asbestos using EPA and ISO published analytical methods. More than 100 personal and area air samples were collected and analyzed for asbestos fibers using NIOSH methods 7400 and 7402. A separate study involved a telephone survey of 16 automotive mechanics who began work prior to 1975. The mechanics were asked about the duration, frequency, and methods used to perform clutch service. Wear debris in the bell housing surrounding clutches had an average of 0.1% chrysotile asbestos by weight, a value consistent with similar reports of brake debris. Asbestos air sampling data collected averaged 0.047 flcc. Mechanics participating in the telephone survey indicated that clutch service was performed infrequently, the entire clutch assembly was normally replaced, and there was no need to otherwise handle the asbestos-containing clutch plates. These mechanics also confirmed that wet methods were most frequently used to clean debris from the bell housing. Combining the asbestos exposure that occurred when mechanics performed clutch service, along with the duration

  7. Underground structure characterization using motor vehicles as passive seismic sources

    Science.gov (United States)

    Kuzma, H. A.; Liu, Y.; Zhao, Y.; Rector, J.; Vaidya, S.

    2009-12-01

    The ability to detect and characterize underground voids will be critical to the success of On-Site Inspections (OSI) as mandated by the nuclear Comprehensive Test Ban Treaty (CTBT). OSIs may be conducted in order to successfully locate the Ground Zero of underground tests as well as infrastructure related to testing. Recently, our team has shown the potential of a new technique to detect underground objects using the amplitude of seismic surface waves generated by motor vehicles. In an experiment conducted in June, 2009 we were able to detect an abandoned railroad tunnel by recognizing a clear pattern in the surface waves scattered by the tunnel, using a signal generated by driving a car on a dirt road across the tunnel. Synthetic experiments conducted using physically realistic wave-equation models further suggest that the technique can be readily applied to detecting underground features: it may be possible to image structures of importance to OSI simply by laying out an array of geophones (or using an array already in place for passive listening for event aftershocks) and driving vehicles around the site. We present evidence from a set of field experiments and from synthetic modeling and inversion studies to illustrate adaptations of the technique for OSI. Signature of an abandoned underground railroad tunnel at Donner Summit, CA. To produce this image, a line of geophones was placed along a dirt road perpendicular to the tunnel (black box) and a single car was driven along the road. A normalized mean power-spectrum is displayed on a log scale as a function of meters from the center of the tunnel. The top of the tunnel was 18m below ground surface. The tunnel anomaly is made up of a shadow (light) directly above the tunnel and amplitude build-up (dark) on either side of the tunnel. The size of the anomaly (6 orders of magnitude) suggests that the method can be extended to find deep structures at greater distances from the source and receivers.

  8. On a Strategy to Develop Robust and Simple Tariffs from Motor Vehicle Insurance Data

    Institute of Scientific and Technical Information of China (English)

    Andreas Christmann

    2005-01-01

    The goals of this paper are twofold: we describe common features in data sets from motor vehicle insurance companies and we investigate a general strategy which exploits the knowledge of such features. The results of the strategy are a basis to develop insurance tariffs. We use a nonparametric approach based on a combination of kernel logistic regression and ε-support vector regression which both have good robustness properties. The strategy is applied to a data set from motor vehicle insurance companies.

  9. A study of the comparability of Naval activity motor vehicle costs

    OpenAIRE

    Simmons, Gregory Scott.

    1993-01-01

    Approved for public release; distribution is unlimited. This thesis reports on a study conducted to determine the feasibility of using a sampling technique within the Department of the Navy to compare in- house motor vehicle costs with the costs that would be incurred were the General Services Administration or a civilian fleet management contractor employed to meet the Navy's motor vehicle needs. Such cost comparison studies are required by the Consolidated Omnibus Budget Reconciliation A...

  10. A geography of moral hazard: sources and sinks of motor-vehicle commuting externalities.

    Science.gov (United States)

    Yiannakoulias, Niko; Bland, Widmer; Scott, Darren M

    2014-09-01

    Motor-vehicles are responsible for harms to health that are not directly experienced by individual drivers - such as air pollution and risk of injury to pedestrians. In addition to their direct effects on health, these harms also represent a moral hazard since drivers are not required to consider their effects as part of their decision to drive. We describe an approach for estimating sources of motor-vehicle commuter externalities as a means of understanding the geography of moral hazard, and in particular, the spatial displacement of negative health externalities associated with motor-vehicle commuting. This approach models motor-vehicle commuter traffic flow by trip origin for small geographic areas within the City of Toronto, Ontario. We find that most health-related externalities associated with motor-vehicle commuters are not locally generated, with a large share coming from outside Toronto. Low income is associated with externalities originating outside the municipal boundary, but not with locally sourced externalities. We discuss the impact of geographical moral hazard on the agency of citizens as well as policy options aimed at addressing motor-vehicle externalities.

  11. Research on motor rotational speed measurement in regenerative braking system of electric vehicle

    Science.gov (United States)

    Pan, Chaofeng; Chen, Liao; Chen, Long; Jiang, Haobin; Li, Zhongxing; Wang, Shaohua

    2016-01-01

    Rotational speed signals acquisition and processing techniques are widely used in rotational machinery. In order to realized precise and real-time control of motor drive and regenerative braking process, rotational speed measurement techniques are needed in electric vehicles. Obtaining accurate motor rotational speed signal will contribute to the regenerative braking force control steadily and realized higher energy recovery rate. This paper aims to develop a method that provides instantaneous speed information in the form of motor rotation. It addresses principles of motor rotational speed measurement in the regenerative braking systems of electric vehicle firstly. The paper then presents ideal and actual Hall position sensor signals characteristics, the relation between the motor rotational speed and the Hall position sensor signals is revealed. Finally, Hall position sensor signals conditioning and processing circuit and program for motor rotational speed measurement have been carried out based on measurement error analysis.

  12. 22 CFR 151.4 - Minimum limits for motor vehicle insurance.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Minimum limits for motor vehicle insurance. 151.4 Section 151.4 Foreign Relations DEPARTMENT OF STATE DIPLOMATIC PRIVILEGES AND IMMUNITIES COMPULSORY LIABILITY INSURANCE FOR DIPLOMATIC MISSIONS AND PERSONNEL § 151.4 Minimum limits for motor...

  13. 78 FR 57822 - Lease and Interchange of Vehicles; Motor Carriers of Passengers

    Science.gov (United States)

    2013-09-20

    ... Federal Motor Carrier Safety Administration 49 CFR Part 390 RIN 2126-AB44 Lease and Interchange of... regulations governing the lease and interchange of passenger-carrying commercial motor vehicles (CMVs) to... that a lessor surrenders control of the CMV for the full term of the lease or temporary exchange...

  14. 78 FR 719 - California State Motor Vehicle Pollution Control Standards; Urban Buses; Request for Waiver of...

    Science.gov (United States)

    2013-01-04

    ... AGENCY California State Motor Vehicle Pollution Control Standards; Urban Buses; Request for Waiver of... amendments to its emission standards for urban bus engines in a series of rulemakings. The rulemakings at... public transit agencies that operate urban buses and other transit vehicles; additionally,...

  15. Bicycle fatalities : trends in crashes with and without motor vehicles in The Netherlands.

    NARCIS (Netherlands)

    Schepers, P. Stipdonk, H.L. Methorst, R. & Olivier, J.

    2017-01-01

    Boufous and Olivier (2015) recently found an increasing trend of police-reported cyclist deaths in single-vehicle crashes while a decreasing trend was found for fatal bicycle-motor vehicle crashes. This study sets out to conduct the same trend analyses for the Netherlands using causes of death stati

  16. 77 FR 17105 - Identification of Interstate Motor Vehicles: City of Chicago, IL Registration Emblem Requirement...

    Science.gov (United States)

    2012-03-23

    ... through the International Fuel Tax Agreement; (3) Under a State law regarding motor vehicle license plates... section 31704; (2) Under the International Fuel Tax Agreement under section 31705 or under an applicable... vehicle inspection standards under section 31136. FMCSA interprets Sec. 14506(b)(3) to establish...

  17. 78 FR 73188 - Adequacy Status of Motor Vehicle Emissions Budget in Submitted State Implementation Plan...

    Science.gov (United States)

    2013-12-05

    ... AGENCY Adequacy Status of Motor Vehicle Emissions Budget in Submitted State Implementation Plan; Maricopa... vehicle emissions budget (MVEB) for particulate matter less than ten microns (PM-10) for the year 2012 in... Environmental Quality (ADEQ) as a revision to the Arizona State Implementation Plan (SIP). As a result of...

  18. 77 FR 44673 - Meeting of the Department of Justice National Motor Vehicle Title Information System Federal...

    Science.gov (United States)

    2012-07-30

    ... Vehicle Title Information System (NMVTIS) Federal Advisory Committee to discuss various issues relating to... of Justice Programs Meeting of the Department of Justice National Motor Vehicle Title Information System Federal Advisory Committee AGENCY: Office of Justice Programs (OJP), Justice. ACTION: Notice...

  19. Prediction of the fuel consumption of heavy goods vehicles by computer simulation

    Energy Technology Data Exchange (ETDEWEB)

    Renouf, M.A.

    The requirement for a computer simulation model of the fuel consumption of Heavy Goods Vehicles is identified and a model is defined. Different operating conditions are simulated and the results compared with those produced by an instrumented articulated vehicle operating at different gross vehicle weights. A comparison is made over short distances and defined conditions on the TRRL test track, and definition of driver behavior enables the experimental situation to be represented. Longer road routes including sections of urban, rural and motorway roads were also simulated and the model accurately predicted the fuel consumption for all gross vehicle weights tested.

  20. Compressed natural gas vehicles motoring towards a green Beijing

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ming; Kraft-Oliver, T. [International Institute for Energy Conservation (IIEC) - Asia, Bangkok (Thailand); Guo Xiao Yan [China North Vehicle Research Institute (CNVRI), Beijing (China)

    1996-12-31

    This paper first describes the state-of-the-art of compressed natural gas (CNG) technologies and evaluates the market prospects for CNG vehicles in Beijing. An analysis of the natural gas resource supply for fleet vehicles follows. The costs and benefits of establishing natural gas filling stations and promoting the development of vehicle technology are evaluated. The quantity of GHG reduction is calculated. The objective of the paper is to provide information of transfer niche of CNG vehicle and equipment production in Beijing. This paper argues that the development of CNG vehicles is a cost-effective strategy for mitigating both air pollution and GHG.

  1. Advanced AC permanent magnet axial flux disc motor for electric passenger vehicle

    Science.gov (United States)

    Kliman, G. B.

    1982-01-01

    An ac permanent magnet axial flux disc motor was developed to operate with a thyristor load commutated inverter as part of an electric vehicle drive system. The motor was required to deliver 29.8 kW (40 hp) peak and 10.4 kW (14 hp) average with a maximum speed of 11,000 rpm. It was also required to run at leading power factor to commutate the inverter. Three motors were built.

  2. Fuel taxes, motor vehicle emission standards and patents related to the fuel-efficiency and emissions of motor vehicles. Joint Meetings of Tax and Environment Experts

    Energy Technology Data Exchange (ETDEWEB)

    Vollebergh, H. [Netherlands Environmental Assessment Agency MNP, Den Haag (Netherlands)

    2010-01-21

    Contribution to the project on Taxation, Innovation and the Environment of OECD's Joint Meetings of Tax and Environment Experts. It studies the impacts of motor vehicle fuel taxes and mandatory fuel efficiency standards on relevant car-related innovation activity in selected car-producing countries.

  3. Innovative Structural and Joining Concepts for Lightweight Design of Heavy Vehicle Systems

    Energy Technology Data Exchange (ETDEWEB)

    Jacky C. Prucz; Samir N. Shoukry; Gergis W. William

    2005-08-31

    Recent advances in the area of Metal Matrix Composites (MMC's) have brought these materials to a maturity stage where the technology is ready for transition to large-volume production and commercialization. The new materials seem to allow the fabrication of higher quality parts at less than 50 percent of the weight as compared to steel, especially when they are selectively reinforced with carbon, silicon carbide, or aluminum oxide fibers. Most of the developments in the MMC materials have been spurred, mainly by applications that require high structural performance at elevated temperatures, the heavy vehicle industry could also benefit from this emerging technology. Increasing requirements of weight savings and extended durability are the main drivers for potential insertion of MMC technology into the heavy vehicle market. Critical elements of a typical tractor-trailer combination, such as highly loaded sections of the structure, engine components, brakes, suspensions, joints and bearings could be improved through judicious use of MMC materials. Such an outcome would promote the DOE's programmatic objectives of increasing the fuel efficiency of heavy vehicles and reducing their life cycle costs and pollution levels. However, significant technical and economical barriers are likely to hinder or even prevent broad applications of MMC materials in heavy vehicles. The tradeoffs between such expected benefits (lower weights and longer durability) and penalties (higher costs, brittle behavior, and difficult to machine) must be thoroughly investigated both from the performance and cost viewpoints, before the transfer of MMC technology to heavy vehicle systems can be properly assessed and implemented. MMC materials are considered to form one element of the comprehensive, multi-faceted strategy pursued by the High Strength/Weight Reduction (HS/WR) Materials program of the U.S. Department of Energy (DOE) for structural weight savings and quality enhancements in

  4. FreedomCAR and vehicle technologies heavy vehicle program FY 2006. Benefits analysis : methodology and results - final report.

    Energy Technology Data Exchange (ETDEWEB)

    Singh, M.; Energy Systems; TA Engineering, Inc.

    2006-01-31

    This report describes the approach to estimating benefits and the analysis results for the Heavy Vehicle Technologies activities of the Freedom Car and Vehicle Technologies (FCVT) Program of EERE. The scope of the effort includes: (1) Characterizing baseline and advanced technology vehicles for Class 3-6 and Class 7 and 8 trucks, (2) Identification of technology goals associated with the DOE EERE programs, (3) Estimating the market potential of technologies that improve fuel efficiency and/or use alternative fuels, (4) Determining the petroleum and greenhouse gas emissions reductions associated with the advanced technologies. In FY 05 the Heavy Vehicles program activity expanded its technical involvement to more broadly address various sources of energy loss as compared to focusing more narrowly on engine efficiency and alternative fuels. This broadening of focus has continued in the activities planned for FY 06. These changes are the result of a planning effort that occurred during FY 04 and 05. (Ref. 1) This narrative describes characteristics of the heavy truck market as they relate to the analysis, a description of the analysis methodology (including a discussion of the models used to estimate market potential and benefits), and a presentation of the benefits estimated as a result of the adoption of the advanced technologies. These benefits estimates, along with market penetrations and other results, are then modeled as part of the EERE-wide integrated analysis to provide final benefit estimates reported in the FY06 Budget Request.

  5. Freedom car and vehicle technologies heavy vehicle program : FY 2007 benefits analysis, methodology and results -- final report.

    Energy Technology Data Exchange (ETDEWEB)

    SIngh, M.; Energy Systems; TA Engineering

    2008-02-29

    This report describes the approach to estimating the benefits and analysis results for the Heavy Vehicle Technologies activities of the FreedomCar and Vehicle Technologies (FCVT) Program of EERE. The scope of the effort includes: (1) Characterizing baseline and advanced technology vehicles for Class 3-6 and Class 7 and 8 trucks, (2) Identifying technology goals associated with the DOE EERE programs, (3) Estimating the market potential of technologies that improve fuel efficiency and/or use alternative fuels, (4) Determining the petroleum and greenhouse gas emissions reductions associated with the advanced technologies. In FY 05 the Heavy Vehicles program activity expanded its technical involvement to more broadly address various sources of energy loss as compared to focusing more narrowly on engine efficiency and alternative fuels. This broadening of focus has continued in subsequent activities. These changes are the result of a planning effort that occurred during FY 04 and 05. (Ref. 1) This narrative describes characteristics of the heavy truck market as they relate to the analysis, a description of the analysis methodology (including a discussion of the models used to estimate market potential and benefits), and a presentation of the benefits estimated as a result of the adoption of the advanced technologies. The market penetrations are used as part of the EERE-wide integrated analysis to provide final benefit estimates reported in the FY07 Budget Request. The energy savings models are utilized by the FCVT program for internal project management purposes.

  6. 77 FR 13385 - Identification of Interstate Motor Vehicles: New York City, Cook County, and New Jersey Tax...

    Science.gov (United States)

    2012-03-06

    ... Federal Motor Carrier Safety Administration Identification of Interstate Motor Vehicles: New York City... reconsideration. SUMMARY: The FMCSA grants a petition for reconsideration submitted by the New York City... credential display requirement of New York City's Commercial Motor Vehicle Tax (CMV Tax) is preempted...

  7. 78 FR 41852 - Hours of Service for Commercial Motor Vehicle Drivers; Regulatory Guidance Concerning Off-Duty Time

    Science.gov (United States)

    2013-07-12

    ... commercial motor vehicle programs and safety regulation. Background On April 4, 1997 (62 FR 16370), the... FR 16422): Question 2: What conditions must be met for a Commercial Motor Vehicle (CMV) driver to... Drivers; Regulatory Guidance Concerning Off-Duty Time AGENCY: Federal Motor Carrier Safety...

  8. Electric vehicles pick up speed as oil prices climb. [General Motors planning EVs in 1985

    Energy Technology Data Exchange (ETDEWEB)

    Bowe, J.

    1980-02-01

    General Motors recently announced that in 1985, its Chevrolet division will begin manufacturing either two-passenger electric automobiles, or small electric vans, or both. Key features of the electric-vehicles will be a separately excited DC motor, regenerative braking, electronic controls, and coil-type suspension. Newly developed zinc-nickel batteries promise higher speeds (up to about 55 mph) and a longer cruising range (about 100 mi before needing a recharge and 30,000 mi before needing replacement). General Motors' commitment to the electric-vehicle market signals the beginning of a radical departure from a traditional petroleum-based economy. (1 diagram, 1 drawing, 2 photos)

  9. Temperature effects on particulate matter emissions from light-duty, gasoline-powered motor vehicles.

    Science.gov (United States)

    Nam, Edward; Kishan, Sandeep; Baldauf, Richard W; Fulper, Carl R; Sabisch, Michael; Warila, James

    2010-06-15

    The Kansas City Light-Duty Vehicle Emissions Study (KCVES) measured exhaust emissions of regulated and unregulated pollutants from 496 vehicles recruited in the Kansas City metropolitan area in 2004 and 2005. Vehicle emissions testing occurred during the summer and winter, with the vehicles operated at ambient temperatures. One key component of this study was the investigation of the influence of ambient temperature on particulate matter (PM) emissions from gasoline-powered vehicles. A subset of the recruited vehicles were tested in both the summer and winter to further elucidate the effects of temperature on vehicle tailpipe emissions. The study results indicated that PM emissions increased exponentially as temperature decreased. In general, PM emissions doubled for every 20 degrees F drop in ambient temperature, with these increases independent of vehicle model year. The effects of temperature on vehicle emissions was most pronounced during the initial start-up of the vehicle (cold start phase) when the vehicle was still cold, leading to inefficient combustion, inefficient catalyst operation, and the potential for the vehicle to be operating under fuel-rich conditions. The large data set available from this study also allowed for the development of a model to describe temperature effects on PM emission rates due to changing ambient conditions. This study has been used as the foundation to develop PM emissions rates, and to model the impact of ambient temperature on these rates, for gasoline-powered vehicles in the EPA's new regulatory motor vehicle emissions model, MOVES.

  10. Self-harm and risk of motor vehicle crashes among young drivers : findings from the DRIVE Study

    NARCIS (Netherlands)

    Martiniuk, Alexandra L. C.; Ivers, Rebecca Q.; Glozier, Nick; Patton, George C.; Lam, Lawrence T.; Boufous, Soufiane; Senserrick, Teresa; Williamson, Ann; Stevenson, Mark; Norton, Robyn

    2009-01-01

    Background: Some motor vehicle crashes, particularly single-vehicle crashes, may result from intentional self-harm. We conducted a prospective cohort study to assess the risk that intentional self-harm poses for motor vehicle crashes among young drivers. Methods: We prospectively linked survey data

  11. Integrated control strategies for railway vehicles with independently-driven wheel motors

    Institute of Scientific and Technical Information of China (English)

    Jinzhi FENG; Jun LI; R. M. Goodall

    2008-01-01

    This paper studies the development of inte-grated control strategies for railway vehicles with inde-pendently-driven wheel motors. First, a non-linear vehicle dynamic model and motor drive strategy are pre-sented, which are followed by an investigation of the inte-grated control of stabilization, steering, and traction for the vehicle. Meanwhile a reformulated Kalman filter is developed and applied to estimate the required feedback by the control system. Finally, the effectiveness and prac-ticality of the proposed integrated controller are examined and assessed by real-time simulation based on host-target computer technology provided by Matlab/Simulink.

  12. Rolling Stability Control Utilizing Rollover Index for In-wheel Motor Electric Vehicle

    Science.gov (United States)

    Kawashima, Kiyotaka; Uchida, Toshiyuki; Hori, Yoichi

    In this paper, a novel integrated stability program (ISP) based on robust rolling stability control (RSC) for in-wheel electric vehicle (EV) is proposed. Since EVs are driven by electric motors, they have the following four remarkable advantages: (1) motor torque generation is quick and accurate, (2) motor torque can be estimated precisely, (3) a motor can be attached to each wheel, and (4) a motor can output negative torque as a brake actuator. These advantages enable a high-performance three-dimensional vehicle motion control with a distributed in-wheel-motor system. Rolling stability is important for all classes of light-vehicles, especially, for EVs that have narrow tread and high center of gravity. In this study, RSC is designed using two-degree-of-freedom control (2-DOF), which achieves tracking capability to reference value and disturbance suppression. However, as the drivability of the vehicle will be changed significantly if only RSC is applied, vehicle rolling motion should be controlled depending on the rolling state. Therefore, variable weight-ISP and variable reference-ISP are proposed using rolling state information. For detecting rolling state, rollover index (RI) is introduced. The validity of the proposed methods is shown by the simulation and the experimental results.

  13. Conversion of Hazardous Motor Vehicle Used Tire and Polystyrene Waste Plastic Mixture into useful Chemical Products

    Directory of Open Access Journals (Sweden)

    Moinuddin Sarker

    2014-02-01

    Full Text Available Motor vehicle used tire and polystyrene waste plastic mixture into fuel recovery using thermal degradation process in laboratory batch process. Motor vehicle used tire and polystyrene waste plastic was use 75 gm by weight. Motor vehicle tire was 25 gm and polystyrene waste plastic was 50 gm. In presence of oxygen experiment was performed under laboratory fume hood. Thermal degradation temperature range was 100 - 420 oC and experiment run time was 5 hours. Product fuel density is 0.84 gm/ml and liquid fuel conversion rate was 54.93 %. Fuel was analysis by GC/MS and compounds are present aliphatic group, aromatic group, alcoholic group, oxygen content and nitrogen content.Fuel can use refinery process as a refinery feed.Keywords: Tire, polystyrene, conversion, chemical product, vehicle, hydrocarbon

  14. Cardiac injuries in car occupants in fatal motor vehicle collisions--an autopsy-based study.

    Science.gov (United States)

    Turk, Elisabeth E; Tsang, Yee-Wah; Champaneri, Anisha; Pueschel, Klaus; Byard, Roger W

    2010-08-01

    Motor vehicle accidents contribute widely to population morbidity and mortality around the world, and cardiac injuries are a major factor determining outcome. Autopsy reports from 380 motor vehicle occupants who died in motor vehicle crashes in Adelaide, Australia, and Hamburg, Germany, over a 6-year period were reviewed, analysing the presence and type of cardiac injuries and their correlation with factors such as crash type, presence of seatbelt/airbag and vehicle speed as well as with the presence of other injuries which might predict the presence of cardiac injuries in a clinical setting. 21.1% had cardiac injuries identified macroscopically autopsy or histology. Cardiac injuries were the only cause of death or contributed to a fatal outcome in 76% of these cases. Sternal fractures and left-sided serial rib fractures were predictive of cardiac injury.

  15. ERGONOMIC DESIGN AND EVALUATION OF COMMERCIAL MOTOR VEHICLES

    Directory of Open Access Journals (Sweden)

    Peter JENČEK

    2013-12-01

    Full Text Available The number and consequences of traffic accidents and work accidents in road transport represent a burden for individuals and society, as well as a substantial economic burden for transport companies, while also affecting their competitiveness. Research in the area of transport and road vehicle ergonomics can contribute to ensuring conditions for a more secure and efficient operation of commercial road vehicles, thereby reducing the risk of road accidents. The safety of vehicle operation and road transport depends in large part on good comportment between ergonomic vehicle design and human capabilities and limitations. Eventual ergonomic incongruity between these elements may have negative safety implications. The article presents an approach to ergonomic design of commercial road vehicles and their ergonomic evaluation, which occurs in two stages, the design of the vehicle and its exploitation.

  16. Disability risk in pediatric motor vehicle crash occupants.

    Science.gov (United States)

    Doud, Andrea N; Schoell, Samantha L; Weaver, Ashley A; Talton, Jennifer W; Barnard, Ryan T; Petty, John K; Stitzel, Joel D

    2017-05-01

    Mortality rates among children in motor vehicle crashes (MVCs) are typically low; however, nonfatal injuries can vary in severity by imposing differing levels of short- and long-term disability. To better discriminate the severity of nonfatal MVC injuries, a pediatric-specific disability risk (DR) metric was created. The National Automotive Sampling System 2000 to 2011 was used to define the top 95% most common Abbreviated Injury Scale (AIS) 2+ injuries among pediatric MVC occupants. Functional Independence Measure scores were abstracted from the National Trauma Data Bank 2002 to 2006. Multiple imputation was used to account for missing data. The DR and coinjury-adjusted DR (DRMAIS) of the most common AIS 2+ MVC-induced injuries were calculated for 7-year-old to 18-year-old children by determining the proportion of those disabled after an injury to those sustaining the injury. DR and DRMAIS values ranged from 0 to 1, representing 0% to 100% DR. The mean DR and DRMAIS of all injuries were 0.290 and 0.191, respectively. DR and DRMAIS were greatest for injuries to the head (DR, 0.340; DRMAIS, 0.279), thorax (DR, 0.320; DRMAIS, 0.233), and spine (DR, 0.315; DRMAIS, 0.200). The mean DR and DRMAIS increased with increasing AIS severity but there was significant variation and overlapping values across AIS severity levels. Comparison of DRMAIS to coinjury-adjusted mortality risk (MRMAIS) revealed that among 118 injuries with MRMAIS of 0.000, DRMAIS ranged from 0.000 to 0.429. Incorporation of DR metrics into injury severity metrics may improve the ability to distinguish between the severity of different nonfatal injuries. This is especially crucial in the pediatric population where permanent disability can result in a high number of years lost due to disability. The accuracy of such severity metrics is crucial to the success of pediatric triage algorithms such as Advanced Automatic Crash Notification algorithms. Epidemiologic/prognostic study, level III.

  17. Motor vehicle crashes during pregnancy and cerebral palsy during infancy: a longitudinal cohort analysis

    Science.gov (United States)

    Redelmeier, Donald A; Naqib, Faisal; Thiruchelvam, Deva; R Barrett, Jon F

    2016-01-01

    Objectives To assess the incidence of cerebral palsy among children born to mothers who had their pregnancy complicated by a motor vehicle crash. Design Retrospective longitudinal cohort analysis of children born from 1 April 2002 to 31 March 2012 in Ontario, Canada. Participants Cases defined as pregnancies complicated by a motor vehicle crash and controls as remaining pregnancies with no crash. Main outcome Subsequent diagnosis of cerebral palsy by age 3 years. Results A total of 1 325 660 newborns were analysed, of whom 7933 were involved in a motor vehicle crash during pregnancy. A total of 2328 were subsequently diagnosed with cerebral palsy, equal to an absolute risk of 1.8 per 1000 newborns. For the entire cohort, motor vehicle crashes correlated with a 29% increased risk of subsequent cerebral palsy that was not statistically significant (95% CI −16 to +110, p=0.274). The increased risk was only significant for those with preterm birth who showed an 89% increased risk of subsequent cerebral palsy associated with a motor vehicle crash (95% CI +7 to +266, p=0.037). No significant increase was apparent for those with a term delivery (95% CI −62 to +79, p=0.510). A propensity score-matched analysis of preterm births (n=4384) yielded a 138% increased relative risk of cerebral palsy associated with a motor vehicle crash (95% CI +27 to +349, p=0.007), equal to an absolute increase of about 10.9 additional cases per 1000 newborns (18.2 vs 7.3, p=0.010). Conclusions Motor vehicle crashes during pregnancy may be associated with an increased risk of cerebral palsy among the subgroup of cases with preterm birth. The increase highlights a specific role for traffic safety advice in prenatal care. PMID:27650764

  18. Research on Electro Hydraulic Proportional Control for Heavy Vehicle Blend Braking System

    Institute of Scientific and Technical Information of China (English)

    XU Ming

    2009-01-01

    A blend braking system of heavy vehicle was proposed. The main control part of the system is the electro hydraulic proportional servo valve. A nonlinear model of brake cylinder controlled by the valve was deduced through the analysis of its control property and system feature. The transfer function of the system was also proposed, and the hydraulic inherent frequency and the PID closed-loop system feature were calculated. The simulated result is consistent with those tested in the bench and on the site with 50t heavy vehicle. The experimental result shows that the control method has quick response and high precision.

  19. Regarding the NVH Behaviour of the more Electric Vehicles. Study Case of a Small PM Motor

    Directory of Open Access Journals (Sweden)

    Florin Lazăr

    2014-09-01

    Full Text Available The noise and vibration behaviour of electric and hybrid vehicles is dramatically different from conventional vehicles. The noise and vibration mechanisms of the individual components (combustion engine, electric motor, transmission etc. are known in principle, but an electric or hybrid powertrain features additional and different components as well as new operation modes compared to a conventional powertrain. This results in new interactions which are uncommon in this form for conventional vehicles. In the case of the electric traction, the electric motor becomes an important noise and vibrations source. Depending on the design of the motor, the electromagnetic (EM pulses and corresponding torque pulses from the motor can be very strong. These can be radiated as noise directly from the motor housing and can also be transmitted structurally to the support structure through the motor mounts. However, the EM forces are generally lower than the combustion and reciprocating mass forces of an IC engine, and significantly, they are at a much higher frequency. On the other side, the electric drives are quite numerous in cars. Lot of smaller motors are involved in X-by-wire systems or other comfort oriented systems. As a study case, the paper is focused on the NVH produced by a 0.25kW PM motor.

  20. Acquired maxillofacial defects from motor vehicle accidents: statistics and prosthodontic considerations.

    Science.gov (United States)

    Wiens, J P

    1990-02-01

    Trauma from motor vehicle accidents is one of the leading causes of death in the United States; moreover, the costs related to personal harm are only second to cancer. Head and neck injuries predominate and involve contact with the vehicle's interior (80%), contact with the vehicle's exterior (12%), or noncontact with the vehicle (8%). The patient with maxillofacial defects resulting from motor vehicle accident will have numerous soft tissue and hard tissue injuries ranging from neurologic involvement to fractures and/or avulsions of the temporomandibular joint, maxillae, mandible, teeth, and supporting structures. Tooth avulsions, pulpitis, and fractures without pulpitis have been found in a 4:2:1 ratio. The prosthodontist plays an important team role by anticipating the increased functional demands that may be placed on the required prostheses and by anticipating the preprosthetic procedures and counseling that may be necessary to assist in the total treatment.

  1. Primer on Motor Fuel Excise Taxes and the Role of Alternative Fuels and Energy Efficient Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, Alex [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-08-26

    Motor fuel taxes were established to finance our nation’s transportation infrastructure, yet evolving economic, political, and technological influences are constraining this ability. At the federal level, the Highway Trust Fund (HTF), which is primarily funded by motor fuel taxes, has become increasingly dependent on general fund contributions and short-term reauthorizations to prevent insolvency. As a result, there are discussions at both the federal and state levels in which stakeholders are examining the future of motor fuel excise taxes as well as the role of electric and alternative fuel vehicles in that future. On July 1, 2015, six states increased their motor fuel tax rates.

  2. Bayesian Parameter Estimation for Heavy-Duty Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Eric; Konan, Arnaud; Duran, Adam

    2017-03-28

    Accurate vehicle parameters are valuable for design, modeling, and reporting. Estimating vehicle parameters can be a very time-consuming process requiring tightly-controlled experimentation. This work describes a method to estimate vehicle parameters such as mass, coefficient of drag/frontal area, and rolling resistance using data logged during standard vehicle operation. The method uses Monte Carlo to generate parameter sets which is fed to a variant of the road load equation. Modeled road load is then compared to measured load to evaluate the probability of the parameter set. Acceptance of a proposed parameter set is determined using the probability ratio to the current state, so that the chain history will give a distribution of parameter sets. Compared to a single value, a distribution of possible values provides information on the quality of estimates and the range of possible parameter values. The method is demonstrated by estimating dynamometer parameters. Results confirm the method's ability to estimate reasonable parameter sets, and indicates an opportunity to increase the certainty of estimates through careful selection or generation of the test drive cycle.

  3. Impact of Fiscal Decentralization on Motor Vehicle Taxation in the Slovak Republic

    Directory of Open Access Journals (Sweden)

    Konečný Vladimír

    2016-03-01

    Full Text Available The article deals with the motor vehicle tax in relation with fiscal decentralization, particularly from 2005 with competence delegated to the self-governing regions in the area of motor vehicle tax. The result of this provision in the field of fiscal decentralization is increasing of differences in the motor vehicle tax burden in self-governing regions of Slovakia. The paper is the result of solving a series of impact studies solved by the authors in this field. Gradually over time from the transfer of competences in setting tax rates on motor vehicles to self-governing regions and usage of the incomes of this tax can realistically assess the development and impact of this element of fiscal decentralization in the Slovak Republic as well as propose a solution of resulting situation. The aim is to eliminate differences in motor vehicle tax burden at regional and interstate level while maintaining the current level of tax revenues of self-governing regions.

  4. Analysis on Beijing’s Policy of Restricting Motor Vehicle Usage

    Institute of Scientific and Technical Information of China (English)

    LIU Jian; ZUO Xiaoxuan

    2012-01-01

    Along with the increase of car ownership,the problem of traffic congestion has appeared more and more serious since the 1990s in Beijing.In order to deal with the problem of traffic congestion,the policy of restricting motor vehicle usage,as a measure of transportation demand management by decreasing the total number of on-road motor vehicles,was firstly implemented in 2006 in trial,which continued from 2008 during the period of Olympic Games up to day.Starting with an analysis on policy motivation,this paper describes the practices of restricting motor vehicle usage in Beijing since 2006,analyzes the effects on the performance of the city’s transportation,and concludes after a comparative analysis that,in spite of the positive effects on relieving the traffic congestion,the policy of restricting motor vehicle usage could only constitute a temporary measure of traffic demand management,rather than a fundamental one,because the comprehensive effects would decrease along with the continuous growth of motor vehicle possession.

  5. Dynamic Modeling and Simulation of a Switched Reluctance Motor in a Series Hybrid Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Siavash Sadeghi

    2010-04-01

    Full Text Available Dynamic behavior analysis of electric motors is required in order to accuratelyevaluate the performance, energy consumption and pollution level of hybrid electricvehicles. Simulation tools for hybrid electric vehicles are divided into steady state anddynamic models. Tools with steady-state models are useful for system-level analysiswhereas tools that utilize dynamic models give in-depth information about the behavior ofsublevel components. For the accurate prediction of hybrid electric vehicle performance,dynamic modeling of the motor and other components is necessary. Whereas the switchedreluctance machine is well suited for electric and hybrid electric vehicles, due to the simpleand rugged construction, low cost, and ability to operate over a wide speed range atconstant power, in this paper dynamic performance of the switched reluctance motor for eseries hybrid electric vehicles is investigated. For this purpose a switched reluctance motorwith its electrical drive is modeld and simulated first, and then the other components of aseries hybrid electric vehicle, such as battery, generator, internal combusion engine, andgearbox, are designed and linked with the electric motor. Finally a typical series hybridelectric vehicle is simulated for different drive cycles. The extensive simulation results showthe dynamic performance of SRM, battery, fuel consumption, and emissions.

  6. a critical evaluation of motor vehicle manufacturing in nigeria

    African Journals Online (AJOL)

    motor manufacturing, but the national technological consciousness based on policy thrust. Keywords: major units ... forms that has been variously modified using wood for trucks and ... After the Nigerian. Civil War in the early 1970s, some state.

  7. Electrification of General Motors' vehicles. A portfolio of solutions

    Energy Technology Data Exchange (ETDEWEB)

    Grebe, Uwe D.; Nitz, Larry T. [General Motors Company, Pontiac, MI (United States)

    2011-07-01

    The electrification of the automobile is progressing fast and is changing the architecture of future vehicles tremendously. This trend is a result of the need for higher vehicle efficiency and the desire to diversify the energy sources used for transportation. General Motors offers a wide portfolio of solutions for vehicle electrification to meet the expectations of customers. Micro-hybrid systems for engine stop-start will become a standard solution for many market segments. Mild and strong hybrid systems together with optimized combustion engines enable the next level of propulsion system efficiency. Plugin hybrids offer the possibility to supplement the energy in the fuel with energy from the grid. The Chevrolet Volt and the Opel Ampera are electric vehicles with extended range. They operate as an electric vehicle as long as there is useful energy in the battery. However, unlike a battery electric vehicle they do not suffer from lost vehicle utility when the battery is depleted. Volt and Ampera can continue operation by using an internal combustion engine. General Motors will widen its portfolio by offering battery-electric vehicles and fuel cellelectric vehicles in the near future. GM sees a coexistence of all the different electrified propulsion systems over the coming decades. (orig.)

  8. Emergency Department Visits by Older Adults for Motor Vehicle Collisions

    Directory of Open Access Journals (Sweden)

    Vogel, Jody A.

    2013-11-01

    Full Text Available Introduction: To describe the epidemiology and characteristics of emergency department (ED visits by older adults for motor vehicle collisions (MVC in the United States (U.S..Methods: We analyzed ED visits for MVCs using data from the 2003–2007 National Hospital Ambulatory Medical Care Survey (NHAMCS. Using U.S. Census data, we calculated annual incidence rates of driver or passenger MVC-related ED visits and examined visit characteristics, including triage acuity, tests performed and hospital admission or discharge. We compared older (65+ years and younger (18-64 years MVC patients and calculated odds ratios (OR and 95% confidence intervals (CIs to measure the strength of associations between age group and various visit characteristics. Multivariable logistic regression was used to identify independent predictors of admissions for MVC-related injuries among older adults.Results: From 2003–2007, there were an average of 237,000 annual ED visits by older adults for MVCs. The annual ED visit rate for MVCs was 6.4 (95% CI 4.6-8.3 visits per 1,000 for older adults and 16.4 (95% CI 14.0-18.8 visits per 1,000 for younger adults. Compared to younger MVC patients, after adjustment for gender, race and ethnicity, older MVC patients were more likely to have at least one imaging study performed (OR 3.69, 95% CI 1.46-9.36. Older MVC patients were not significantly more likely to arrive by ambulance (OR 1.47; 95% CI 0.76–2.86, have a high triage acuity (OR 1.56; 95% CI 0.77-3.14, or to have a diagnosis of a head, spinal cord or torso injury (OR 0.97; 95% CI 0.42-2.23 as compared to younger MVC patients after adjustment for gender, race and ethnicity. Overall, 14.5% (95% CI 9.8-19.2 of older MVC patients and 6.1% (95% CI 4.8-7.5 of younger MVC patients were admitted to the hospital. There was also a non-statistically significant trend toward hospital admission for older versus younger MVC patients (OR 1.78; 95% CI 0.71-4.43, and admission to the ICU if

  9. Note on Modern Trends in Heavy Vehicle Electrical Electronic systems

    Directory of Open Access Journals (Sweden)

    B. S. Sastry

    1982-04-01

    Full Text Available The paper presents an overview of some of the aerospace control systems that are being successfully adopted in the field of Armoured Fighting Vehicles. An automatic electronic transmission controller for an epicyclic gear box with a torque converter to select the forward and reverse speeds in a sequential logic has been developed. Transducers developed for monitoring various engine and transmission parameters are being used for Electronic Fuel Injection (EFI, variable valve timings and electronic governing.

  10. Development and Demonstration of a Low Cost Hybrid Drive Train for Medium and Heavy Duty Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Strangas, Elias; Schock, Harold; Zhu, Guoming; Moran, Kevin; Ruckle, Trevor; Foster, Shanelle; Cintron-Rivera, Jorge; Tariq, Abdul; Nino-Baron, Carlos

    2011-04-30

    The DOE sponsored effort is part of a larger effort to quantify the efficiency of hybrid powertrain systems through testing and modeling. The focus of the DOE sponsored activity was the design, development and testing of hardware to evaluate the efficiency of the electrical motors relevant to medium duty vehicles. Medium duty hybrid powertrain motors and generators were designed, fabricated, setup and tested. The motors were a permanent magnet configuration, constructed at Electric Apparatus Corporation in Howell, Michigan. The purpose of this was to identify the potential gains in terms of fuel cost savings that could be realized by implementation of such a configuration. As the electric motors constructed were prototype designs, the scope of the project did not include calculation of the costs of mass production of the subject electrical motors or generator.

  11. Emission factors for heavy metals from diesel and petrol used in European vehicles

    NARCIS (Netherlands)

    Pulles, M.P.J.; Denier van der Gon, H.A.C.; Appelman, W.A.J.; Verheul, M.

    2012-01-01

    Abstract: Heavy metals constitute an important group of persistent toxic pollutants occurring in ambient air and other media. One of the suspected sources of these metals in the atmosphere is combustion of transport fuels in road vehicles. However estimates of the emissions of these metals from road

  12. Emission factors for heavy metals from diesel and petrol used in European vehicles

    NARCIS (Netherlands)

    Pulles, M.P.J.; Denier van der Gon, H.A.C.; Appelman, W.A.J.; Verheul, M.

    2012-01-01

    Abstract: Heavy metals constitute an important group of persistent toxic pollutants occurring in ambient air and other media. One of the suspected sources of these metals in the atmosphere is combustion of transport fuels in road vehicles. However estimates of the emissions of these metals from road

  13. Alloy Design and Thermomechanical Processing of a Beta Titanium Alloy for a Heavy Vehicle Application

    Energy Technology Data Exchange (ETDEWEB)

    Blue, C.A.; Peter, W.H.

    2010-07-02

    With the strength of steel, but at half the weight, titanium has the potential to offer significant benefits in the weight reduction of heavy vehicle components while possibly improving performance. However, the cost of conventional titanium fabrication is a major barrier in implementation. New reduction technologies are now available that have the potential to create a paradigm shift in the way the United States uses titanium, and the economics associated with fabrication of titanium components. This CRADA project evaluated the potential to develop a heavy vehicle component from titanium powders. The project included alloy design, development of manufacturing practices, and modeling the economics associated with the new component. New Beta alloys were designed for this project to provide the required mechanical specifications while utilizing the benefits of the new fabrication approach. Manufacturing procedures were developed specific to the heavy vehicle component. Ageing and thermal treatment optimization was performed to provide the desired microstructures. The CRADA partner established fabrication practices and targeted capital investment required for fabricating the component out of titanium. Though initial results were promising, the full project was not executed due to termination of the effort by the CRADA partner and economic trends observed in the heavy vehicle market.

  14. Mechanistic-empirical subgrade design model based on heavy vehicle simulator test results

    CSIR Research Space (South Africa)

    Theyse, HL

    2006-06-01

    Full Text Available -empirical design models. This paper presents a study on subgrade permanent deformation based on the data generated from a series of Heavy Vehicle Simulator (HVS) tests done at the Richmond Field Station in California. The total subgrade deflection was found to be a...

  15. Three decades of development and achievements: the heavy vehicle simulator in accelerated pavement testing

    CSIR Research Space (South Africa)

    Du Plessis, L

    2006-06-01

    Full Text Available The purpose of this paper is two fold. First, it will provide a brief description of the technological developments involved in the Heavy Vehicle Simulator (HVS) accelerated pavement testing equipment. This covers the period from concept in the late...

  16. US Department of Energy workshop on future fuel technology for heavy vehicles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The objective of the workshop described in this report was to develop consensus on a program strategy for use of alternative fuels in heavy vehicles. Participants represented fuel providers, additive suppliers, the trucking industry, engine manufacturers, and government or national laboratory staff. Breakout sessions were co-facilitated by national laboratory staff and industry representatives.

  17. Personal exposure to asbestos and respiratory health of heavy vehicle brake mechanics.

    Science.gov (United States)

    Cely-García, María Fernanda; Torres-Duque, Carlos A; Durán, Mauricio; Parada, Patricia; Sarmiento, Olga Lucía; Breysse, Patrick N; Ramos-Bonilla, Juan P

    2015-01-01

    Asbestos brake linings and blocks are currently used in heavy vehicle brake repair shops (BRSs) in Bogotá, Colombia. Some brake products are sold detached from their supports and without holes, requiring manipulation before installation. The aim of this study was to assess asbestos exposures and conduct a preliminary evaluation of respiratory health in workers of heavy vehicles in BRSs. To estimate asbestos exposures, personal and area samples were collected in two heavy vehicle BRSs. Each shop was sampled during six consecutive days for the entire work shift. Personal samples were collected on 10 workers including riveters, brake mechanics, and administrative staff. Among workers sampled, riveters had the highest phase contrast microscopy equivalent (PCME) asbestos concentrations, with 8-h time-weighted average (TWA) personal exposures ranging between 0.003 and 0.157 f/cm(3). Respiratory health evaluations were performed on the 10 workers sampled. Three workers (30%) had circumscribed pleural thickening (pleural plaques), with calcifications in two of them. This finding is strongly suggestive of asbestos exposure. The results of this study provide preliminary evidence that workers in heavy vehicle BRSs could be at excessive risk of developing asbestos-related diseases.

  18. Thrust Reduction of Magnetic Levitation Vehicle Driven by Long Stator Linear Synchronous Motor

    Directory of Open Access Journals (Sweden)

    Wan-Tsun Tseng

    2013-01-01

    Full Text Available The propulsion technology of long stator linear synchronous motors is used to drive high-speed maglev trains. The linear synchronous motor stator is divided into sections placed on guideway. The electric power supplies to stator sections in which the train just passes in change-step mode for long-distance operation. However, a thrust drop will be caused by change-step machinery for driving magnetic vehicle. According to the train speed and vehicle data, the change-step mode has three types of operation, namely premature commutation, simultaneous commutation, and late commutation. Each type of operation has a different thrust drop which can be affected by several parameters such as jerk, running speed, motor section length, and vehicle data. This paper focuses on determining the thrust drop of the change-step mode. The study results of this paper can be used to improve the operation system of high-speed maglev trains.

  19. Automated processing of data on the use of motor vehicles in the Serbian Armed Forces

    Directory of Open Access Journals (Sweden)

    Nikola S. Osmokrović

    2012-10-01

    Full Text Available The main aim of introducing information technology into the armed forces is the automation of the management process. The management in movement and transport (M&T in our armed forces has been included in the process of automation from the beginning. For that reason, today we can speak about the automated processing of data on road traffic safety and on the use of motor vehicles. With regard to the overall development of the information system of the movement and transport service, the paper presents an information system of the M&T service for the processing of data on the use of motor vehicles. The main features, components and functions of the 'Vozila' application, which was specially developed for the automated processing of data on motor vehicle use, are explained in particular.

  20. Imparting Motion to a Test Object Such as a Motor Vehicle in a Controlled Fashion

    Science.gov (United States)

    Southward, Stephen C. (Inventor); Reubush, Chandler (Inventor); Pittman, Bryan (Inventor); Roehrig, Kurt (Inventor); Gerard, Doug (Inventor)

    2014-01-01

    An apparatus imparts motion to a test object such as a motor vehicle in a controlled fashion. A base has mounted on it a linear electromagnetic motor having a first end and a second end, the first end being connected to the base. A pneumatic cylinder and piston combination have a first end and a second end, the first end connected to the base so that the pneumatic cylinder and piston combination is generally parallel with the linear electromagnetic motor. The second ends of the linear electromagnetic motor and pneumatic cylinder and piston combination being commonly linked to a mount for the test object. A control system for the linear electromagnetic motor and pneumatic cylinder and piston combination drives the pneumatic cylinder and piston combination to support a substantial static load of the test object and the linear electromagnetic motor to impart controlled motion to the test object.

  1. Demonstration of Alternative Fuel, Light and Heavy Duty Vehicles in State and Municipal Vehicle Fleets

    Energy Technology Data Exchange (ETDEWEB)

    Kennedy, John H.; Polubiatko, Peter; Tucchio, Michael A.

    2002-02-06

    This project involved the purchase of two Compressed Natural Gas School Buses and two electric Ford Rangers to demonstrate their viability in a municipal setting. Operational and maintenance data were collected for analysis. In addition, an educational component was undertaken with middle school children. The children observed and calculated how electric vehicles could minimize pollutants through comparison to conventionally powered vehicles.

  2. 40 CFR 80.527 - Under what conditions may motor vehicle diesel fuel subject to the 15 ppm sulfur standard be...

    Science.gov (United States)

    2010-07-01

    ... vehicle diesel fuel subject to the 15 ppm sulfur standard be downgraded to motor vehicle diesel fuel... Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Motor Vehicle Diesel Fuel Standards and Requirements § 80.527 Under what conditions may motor vehicle diesel fuel subject to the...

  3. Presentation of CAE system for motor sports vehicle chassis development; Motor sports sharyo no shassis kaihatsuyo CAE system no shokai

    Energy Technology Data Exchange (ETDEWEB)

    Tokunaga, N.; Ueda, E. [Nissan Motor Co. Ltd., Tokyo (Japan)

    2000-02-01

    In the recent motor sports vehicle development introduction of a new model in a short cycle to secure high competition ability shortens the period from its completion to the race. And application of embedded controls makes development process more complicated. In this circumstance, predictive development style becomes more important in order to achieve the performance at high level when the new car is at shakedown. In this paper, summary and the application examples are presented with regard to three important CAE tools such as lap time simulation, vehicle dynamics simulation and suspension kinematics simulation which are developed to realize the said development style. (author)

  4. Driving modes for designing the cornering response of fully electric vehicles with multiple motors

    Science.gov (United States)

    De Novellis, Leonardo; Sorniotti, Aldo; Gruber, Patrick

    2015-12-01

    Fully electric vehicles with multiple drivetrains allow a significant variation of the steady-state and transient cornering responses through the individual control of the electric motor drives. As a consequence, alternative driving modes can be created that provide the driver the option to select the preferred dynamic vehicle behavior. This article presents a torque-vectoring control structure based on the combination of feedforward and feedback contributions for the continuous control of vehicle yaw rate. The controller is specifically developed to be easily implementable on real-world vehicles. A novel model-based procedure for the definition of the control objectives is described in detail, together with the automated tuning process of the algorithm. The implemented control functions are demonstrated with experimental vehicle tests. The results show the possibilities of torque-vectoring control in designing the vehicle understeer characteristic.

  5. Role of motor vehicle lifetime extension in climate change policy.

    Science.gov (United States)

    Kagawa, Shigemi; Nansai, Keisuke; Kondo, Yasushi; Hubacek, Klaus; Suh, Sangwon; Minx, Jan; Kudoh, Yuki; Tasaki, Tomohiro; Nakamura, Shinichiro

    2011-02-15

    Vehicle replacement schemes such as the "cash for clunkers" program in the U.S. and the "scrappage scheme" in the UK have featured prominently in the economic stimulation packages initiated by many governments to cope with the global economic crisis. While these schemes were designed as economic instruments to support the vehicle production industry, governments have also claimed that these programs have environmental benefits such as reducing CO2 emissions by bringing more fuel-efficient vehicles onto the roads. However, little evidence is available to support this claim as current energy and environmental accounting models are inadequate for comprehensively capturing the economic and environmental trade-offs associated with changes in product life and product use. We therefore developed a new dynamic model to quantify the carbon emissions due to changes in product life and consumer behavior related to product use. Based on a case study of Japanese vehicle use during the 1990-2000 period, we found that extending, not shortening, the lifetime of a vehicle helps to reduce life-cycle CO2 emissions throughout the supply chain. Empirical results also revealed that even if the fuel economy of less fuel-efficient ordinary passenger vehicles were improved to levels comparable with those of the best available technology, i.e. hybrid passenger cars currently being produced in Japan, total CO2 emissions would decrease by only 0.2%. On the other hand, we also find that extending the lifetime of a vehicle contributed to a moderate increase in emissions of health-relevant air pollutants (NOx, HC, and CO) during the use phase. From the results, this study concludes that the effects of global warming and air pollution can be somewhat moderated and that these problems can be addressed through specific policy instruments directed at increasing the market for hybrid cars as well as extending lifetime of automobiles, which is contrary to the current wisdom.

  6. Conversion of the exhaust emission results obtained from combustion engines of heavy-duty vehicles

    Science.gov (United States)

    Merkisz, J.; Pielecha, J.

    2016-09-01

    The use of internal combustion engines as the drive for heavy-duty vehicles forces these engines to be tested on an engine dynamometer. Thus, these engines operate under forced conditions, which are significantly different from their actual application. To assess the ecology of such vehicles (or more accurately the engine alone) the emission of pollution per unit of work done by the engine must be determined. However, obtaining the results of unit emissions (expressed in grams of the compound per a unit of performed work) does not give the grounds for determining the mass of pollutants on a given stretch of the road travelled by the vehicle. Therefore, there is a need to change the emission value expressed in units referenced to the engine work into a value of road emissions. The paper presents a methodology of determining pollutant emissions of heavy-duty road vehicles on the basis of the unit emissions, as well as additional parameters determined on the basis of the algorithm presented in the article. A solution was obtained that can be used not only for heavy-duty vehicles, but was also extended to allow use for buses.

  7. 75 FR 43405 - Certification of Enforcement of the Heavy Vehicle Use Tax

    Science.gov (United States)

    2010-07-26

    ... Office of Congressman Don Young, (2) the New York Department of Motor Vehicles, (3) the State of... comments. General Comments The first commenting organization, the Office of Congressman Don Young; Alaska... October 1 of each year. \\3\\ Drug Offender Driver's License Suspension Program, 23 CFR 192.10;...

  8. Combustion and emission analysis of heavy-duty vehicle diesel engine

    Science.gov (United States)

    Sun, Zhixin; Wang, Xue; Wang, Xiancheng; Zhou, Jingkai

    2017-03-01

    Aiming at the research on combustion and emission characteristics of heavy-duty vehicle diesel engine, a bench test was carried out for PM and NOx emission for a certain type diesel engine under different speed and loads. Results shows that for this type of heavy-duty vehicle diesel engine, ignition delay is longer and the proportion of diffusion combustion increases under high speed of external characteristics conditions. Under the speed of 1400 r/min, ignition delay decreases with load increases, combustion duration shortened at first, then increases, the proportion of diffusion combustion increases. The ignition delay is longer and cylinder temperature is higher under lower speed external characteristics of diesel engine, the emissions of soot and NOx are heavier; with large load of external characteristics of diesel engine, the emissions of soot and NOx are heavy as well.

  9. Advanced dc motor controller for battery-powered electric vehicles

    Science.gov (United States)

    Belsterling, C. A.

    1981-01-01

    A motor generation set is connected to run from the dc source and generate a voltage in the traction motor armature circuit that normally opposes the source voltage. The functional feasibility of the concept is demonstrated with tests on a Proof of Principle System. An analog computer simulation is developed, validated with the results of the tests, applied to predict the performance of a full scale Functional Model dc Controller. The results indicate high efficiencies over wide operating ranges and exceptional recovery of regenerated energy. The new machine integrates both motor and generator on a single two bearing shaft. The control strategy produces a controlled bidirectional plus or minus 48 volts dc output from the generator permitting full control of a 96 volt dc traction motor from a 48 volt battery, was designed to control a 20 hp traction motor. The controller weighs 63.5 kg (140 lb.) and has a peak efficiency of 90% in random driving modes and 96% during the SAE J 227a/D driving cycle.

  10. Rare-Earth-Free Traction Motor: Rare Earth-Free Traction Motor for Electric Vehicle Applications

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-01-01

    REACT Project: Baldor will develop a new type of traction motor with the potential to efficiently power future generations of EVs. Unlike today’s large, bulky EV motors which use expensive, imported rare-earth-based magnets, Baldor’s motor could be light, compact, contain no rare earth materials, and have the potential to deliver more torque at a substantially lower cost. Key innovations in this project include the use of a unique motor design, incorporation of an improved cooling system, and the development of advanced materials manufacturing techniques. These innovations could significantly reduce the cost of an electric motor.

  11. Control Algorithms of Propulsion Unit with Induction Motors for Electric Vehicle

    Directory of Open Access Journals (Sweden)

    PALACKY, P.

    2014-05-01

    Full Text Available The article deals with the research of algorithms for controlling electronic differential and differential lock of an electrically driven vehicle. The simulation part addresses the development of algorithms suitable for the implementation into a real system of a road vehicle. The algorithms are then implemented into a vehicle, a propulsion unit of which is consists of two separate electric drives with induction motors fed by voltage inverters with own control units using advanced signal processors. Communication among control units is provided by means of SPI interface. A method of vector control is used for the control of induction motors. The developed algorithms are experimentally verified for correct function in a laboratory using a roll test stand and while driving an electrically driven vehicle on the road.

  12. Benzene exhaust emissions from in-use General Motors vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Dasch, J.M.; Williams. R.L. (General Motors Research Labs., Warren, MI (United States))

    1991-05-01

    Benzene emissions were measured from the exhaust of 73 in-use, light-duty vehicles. Benzene averaged 27 mg/mile for 1983-1987 cars. Hydrocarbon emissions also decreased after 1982 as closed-loop systems and fuel control improved. Benzene emissions showed a modest increase with mileage: the base-line benzene was 6.6 mg/mile with an increase of 1.0 mg/mile for each additional 10,000 miles of travel. Lower levels of benzene were emitted from dual-bed catalysts than from three-way catalysts. However, since many engine modifications were made during the period when dual-bed catalysts were replaced with three-way catalysts than from three-way catalysts. However, since many engine modifications were made during the period when dual-bed catalysts were replaced with three-way catalysts, a direct comparison is difficult. In a recent EPA paper, benzene emissions were calculated to be 102-119 mg/mile for the 1986 vehicle fleet. Based on the in-use values measured in this study of 9.4 mg/mile for 1983-1987 vehicles, substantial decreases in the fleet average are expected as these newer vehicles dominate the vehicle fleet.

  13. Thermal management concepts for higher efficiency heavy vehicles.

    Energy Technology Data Exchange (ETDEWEB)

    Wambsganss, M. W.

    1999-05-19

    Thermal management is a cross-cutting technology that directly or indirectly affects engine performance, fuel economy, safety and reliability, aerodynamics, driver/passenger comfort, materials selection, emissions, maintenance, and component life. This review paper provides an assessment of thermal management for large trucks, particularly as it impacts these features. Observations arrived at from a review of the state of the art for thermal management for over-the-road trucks are highlighted and commented on. Trends in the large truck industry, pertinent engine truck design and performance objectives, and the implications of these relative to thermal management, are presented. Finally, new thermal management concepts for high efficiency vehicles are described.

  14. Single wheel hub motor failures and their impact on vehicle and driver behaviour

    Science.gov (United States)

    Wanner, Daniel; Kreußlein, Maria; Augusto, Bruno; Drugge, Lars; Stensson Trigell, Annika

    2016-10-01

    This research work studies the impact of single wheel hub motor failures on the dynamic behaviour of electric vehicles and the corresponding driver reactions. An experimental study in a moving-base driving simulator is conducted to analyse the influence of single wheel hub motor failures for motorway speeds. Driver reaction times are derived from the measured data and discussed in their experimental context. The failure is rated objectively on the dynamic behaviour of the vehicle and compared to the subjective evaluation. Findings indicate that critical traffic situations impairing traffic safety can occur for motorway speeds. Clear counteractions by the drivers had to be taken.

  15. Thrust Reduction of Magnetic Levitation Vehicle Driven by Long Stator Linear Synchronous Motor

    OpenAIRE

    Wan-Tsun Tseng

    2013-01-01

    The propulsion technology of long stator linear synchronous motors is used to drive high-speed maglev trains. The linear synchronous motor stator is divided into sections placed on guideway. The electric power supplies to stator sections in which the train just passes in change-step mode for long-distance operation. However, a thrust drop will be caused by change-step machinery for driving magnetic vehicle. According to the train speed and vehicle data, the change-step mode has three types of...

  16. Developing particulate thin filter using coconut fiber for motor vehicle emission

    Science.gov (United States)

    Wardoyo, A. Y. P.; Juswono, U. P.; Riyanto, S.

    2016-03-01

    Amounts of motor vehicles in Indonesia have been recognized a sharply increase from year to year with the increment reaching to 22 % per annum. Meanwhile motor vehicles produce particulate emissions in different sizes with high concentrations depending on type of vehicles, fuels, and engine capacity. Motor Particle emissions are not only to significantly contribute the atmosphric particles but also adverse to human health. In order to reduce the particle emission, it is needed a filter. This study was aimed to develop a thin filter using coconut fiber to reduce particulate emissions for motor vehicles. The filter was made of coconut fibers that were grinded into power and mixed with glues. The filter was tested by the measurements of particle concentrations coming out from the vehicle exhaust directly and the particle concentrations after passing through the filter. The efficiency of the filter was calculated by ratio of the particle concentrations before comming in the filter to the particle conentrations after passing through the filter. The results showed that the efficiency of the filter obtained more than 30 %. The efficiency increases sharply when a number of the filters are arranged paralelly.

  17. Multi-functional annular fairing for coupling launch abort motor to space vehicle

    Science.gov (United States)

    Camarda, Charles J. (Inventor); Scotti, Stephen J. (Inventor); Buning, Pieter G. (Inventor); Bauer, Steven X. S. (Inventor); Engelund, Walter C. (Inventor); Schuster, David M. (Inventor)

    2011-01-01

    An annular fairing having aerodynamic, thermal, structural and acoustic attributes couples a launch abort motor to a space vehicle having a payload of concern mounted on top of a rocket propulsion system. A first end of the annular fairing is fixedly attached to the launch abort motor while a second end of the annular fairing is attached in a releasable fashion to an aft region of the payload. The annular fairing increases in diameter between its first and second ends.

  18. Design and research on the electronic parking brake system of the medium and heavy duty vehicles

    Directory of Open Access Journals (Sweden)

    Hongliang WANG

    2015-04-01

    Full Text Available Focusing on auto control of parking brake system of the medium and heavy duty vehicles, the key problems are studied including the system design and control strategies. The structure and working principle of the parking brake system of the medium and heavy duty vehicles are analyzed. The functions of EPB are proposed. The important information of the vehicle are analyzed which could influence the EPB system. The overall plan of the pneumatic EPB system is designed, which adopts the two-position three-way electromagnetic valve with double coil as actuator. The system could keep the vehicle parking brake status or parking release status for a long time without power supply. The function modules of the system are planned, and the control strategies of automatic parking brake and parking release are made. The experiment is performed on a medium-sized commercial vehicle which is experimentally modified. The overall plan of the pneumatic EPB system and the automatic parking function are proved through real vehicle tests.

  19. Motor integrated permanent magnet gear in a battery electrical vehicle

    DEFF Research Database (Denmark)

    Frandsen, Tommy; Mathe, Laszlo; Berg, Nick Ilsø

    2013-01-01

    ) and the background for the specifications are elaborated. Simulated as well as measured results of rotational losses of the first and second version are compared. The efficiency of the new design is investigated and compared to the drivetrain of the Tesla Roadster and two direct drive axial flux motors in a few...

  20. Vehicles motors and environment; Moteurs automobiles et environnement

    Energy Technology Data Exchange (ETDEWEB)

    Dionnet, F.

    2005-07-01

    This paper presents the problem of the pollutants emission by the motors of automobiles. The european regulations lead the automotive industry to develop research programs to decrease the emission level more and more difficult to raise. He discusses the new catalysts, the diesel engines, the direct injection and the natural gas fuels. (A.L.B.)

  1. Trace elements in particles of motor vehicle exhaust in Shanghai

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A nuclear microprobe with high spatial resolution and high analyticalsensitivity was applied to analyze trace elements, especially lead, in vehicle exhaust ofShanghai city. The result shows that the chemical composition and its correspondingx-ray relative intensity are different among different vehicle exhausts. There arc manykinds of metal elements in particles of vehicle exhaust, most are harnful to people,such as Ti, Cr, Mn, Pb, etc. We found that the lead concentration was 6820μg/g andthe bromine concentration was 5300 μg/g in the exhaust from Santana using leadedgasoline (SULG), which is higher than any other kinds of vehicle exhausts. We havealso detected the minimum lead in the particles of unleaded gasoline and its contentvaries from one to another. Its mean concentration was 450 μg/g and the highestreached 6210 μg/g. The unleaded gasoline's Pb existed in the whole particle while theleaded gasoline's enriched in the surface of the particle and was more harmful to thehuman beings.

  2. 75 FR 67233 - Federal Motor Vehicle Safety Standards; Head Restraints

    Science.gov (United States)

    2010-11-02

    ... Positions b. Leadtime for Small Vehicle Manufacturers c. Static Lockout of Active Head Restraints During.... Petitions for Rulemaking a. Discomfort Metric for Non-Use Position and Relaxation Requirement for Gap b... of Active Head Restraints During Backset Retention Testing 1. NHTSA Agrees To Specify the Fixation...

  3. Next Generation Heavy-Lift Launch Vehicle: Large Diameter, Hydrocarbon-Fueled Concepts

    Science.gov (United States)

    Holliday, Jon; Monk, Timothy; Adams, Charles; Campbell, Ricky

    2012-01-01

    With the passage of the 2010 NASA Authorization Act, NASA was directed to begin the development of the Space Launch System (SLS) as a follow-on to the Space Shuttle Program. The SLS is envisioned as a heavy lift launch vehicle that will provide the foundation for future large-scale, beyond low Earth orbit (LEO) missions. Supporting the Mission Concept Review (MCR) milestone, several teams were formed to conduct an initial Requirements Analysis Cycle (RAC). These teams identified several vehicle concept candidates capable of meeting the preliminary system requirements. One such team, dubbed RAC Team 2, was tasked with identifying launch vehicles that are based on large stage diameters (up to the Saturn V S-IC and S-II stage diameters of 33 ft) and utilize high-thrust liquid oxygen (LOX)/RP engines as a First Stage propulsion system. While the trade space for this class of LOX/RP vehicles is relatively large, recent NASA activities (namely the Heavy Lift Launch Vehicle Study in late 2009 and the Heavy Lift Propulsion Technology Study of 2010) examined specific families within this trade space. Although the findings from these studies were incorporated in the Team 2 activity, additional branches of the trade space were examined and alternative approaches to vehicle development were considered. Furthermore, Team 2 set out to define a highly functional, flexible, and cost-effective launch vehicle concept. Utilizing this approach, a versatile two-stage launch vehicle concept was chosen as a preferred option. The preferred vehicle option has the capability to fly in several different configurations (e.g. engine arrangements) that gives this concept an inherent operational flexibility which allows the vehicle to meet a wide range of performance requirements without the need for costly block upgrades. Even still, this concept preserves the option for evolvability should the need arise in future mission scenarios. The foundation of this conceptual design is a focus on low

  4. 77 FR 72296 - Public Meeting of the U.S.-Canada Regulatory Cooperation Council (RCC) Motor Vehicles Working Group

    Science.gov (United States)

    2012-12-05

    ... Cooperation Council (RCC) Motor Vehicles Working Group AGENCY: National Highway Traffic Safety Administration... 30 and 31, 2012, the RCC and its bi-national working groups facilitated stakeholder meetings in Washington, DC. This notice announces a public meeting of the RCC Motor Vehicles Working Group. DATES:...

  5. 75 FR 38168 - Federal Motor Vehicle Theft Prevention Standard; Final Listing of 2011 Light Duty Truck Lines...

    Science.gov (United States)

    2010-07-01

    ... TRANSPORTATION National Highway Traffic Safety Administration Federal Motor Vehicle Theft Prevention Standard... to the requirements of the Federal motor vehicle theft prevention standard. The final rule also... INFORMATION section and Appendix A-I listing of the final rule. All previous information associated with the...

  6. 49 CFR 372.103 - Motor vehicles employed solely in transporting school children and teachers to or from school.

    Science.gov (United States)

    2010-10-01

    ... school children and teachers to or from school. 372.103 Section 372.103 Transportation Other Regulations... Exemptions § 372.103 Motor vehicles employed solely in transporting school children and teachers to or from... motor vehicles being used at the time of operation in the transportation of schoolchildren and...

  7. 49 CFR 1572.201 - Transportation of hazardous materials via commercial motor vehicle from Canada or Mexico to and...

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Transportation of hazardous materials via commercial motor vehicle from Canada or Mexico to and within the United States. 1572.201 Section 1572.201... Land Modes § 1572.201 Transportation of hazardous materials via commercial motor vehicle from Canada...

  8. 40 CFR 80.583 - What alternative sampling and testing requirements apply to importers who transport motor vehicle...

    Science.gov (United States)

    2010-07-01

    ... requirements apply to importers who transport motor vehicle diesel fuel, NRLM diesel fuel, or ECA marine fuel by truck or rail car? 80.583 Section 80.583 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Motor Vehicle Diesel...

  9. 41 CFR 102-34.60 - How do we calculate the average fuel economy for Government motor vehicles?

    Science.gov (United States)

    2010-07-01

    ... Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 34-MOTOR VEHICLE MANAGEMENT Obtaining Fuel Efficient Motor Vehicles § 102-34.60... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false How do we calculate...

  10. 41 CFR 102-34.80 - Where may we obtain help with our motor vehicle acquisition plans?

    Science.gov (United States)

    2010-07-01

    ... Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 34-MOTOR VEHICLE MANAGEMENT Obtaining Fuel Efficient Motor Vehicles § 102-34.80 Where may we... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Where may we obtain...

  11. 40 CFR 86.099-10 - Emission standards for 1999 and later model year Otto-cycle heavy-duty engines and vehicles.

    Science.gov (United States)

    2010-07-01

    ... model year Otto-cycle heavy-duty engines and vehicles. 86.099-10 Section 86.099-10 Protection of... Heavy-Duty Vehicles § 86.099-10 Emission standards for 1999 and later model year Otto-cycle heavy-duty... described in this section do not apply to Otto-cycle medium-duty passenger vehicles (MDPVs) that are...

  12. Heavy vehicle propulsion system materials program semiannual progress report for April 1998 thru September 1998

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1999-01-01

    The purpose of the Heavy Vehicle Propulsion System Materials Program is the development of materials: ceramics, intermetallics, metal alloys, and metal and ceramic coatings, to support the dieselization of class 1--3 trucks to realize a 35{percent} fuel-economy improvement over current gasoline-fueled trucks and to support commercialization of fuel-flexible LE-55 low-emissions, high-efficiency diesel engines for class 7--8 trucks. The Office of Transportation Technologies, Office of Heavy Vehicle Technologies (OTT OHVT) has an active program to develop the technology for advanced LE-55 diesel engines with 55{percent} efficiency and low emissions levels of 2.0 g/bhp-h NO{sub x} and 0.05 g/bhp-h particulates. The goal is also for the LE-55 engine to run on natural gas with efficiency approaching that of diesel fuel. The LE-55 program is being completed in FY 1997 and, after approximately 10 years of effort, has largely met the program goals of 55{percent} efficiency and low emissions. However, the commercialization of the LE-55 technology requires more durable materials than those that have been used to demonstrate the goals. Heavy Vehicle Propulsion System Materials will, in concert with the heavy-duty diesel engine companies, develop the durable materials required to commercialize the LE-55 technologies.

  13. Auto-Test on Motor Temperature Rising in Electric Vehicles with Mutual MRAS

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    A new method to calculate the motor temperature rising in electric vehicle (EV) is proposed based on the stator resistance identification. The measure theory of the motor temperature rising with the stator resistance is discussed at first. An enhanced magnetism motor dynamic math model is built which is the research object. Then the resistance identification system model is built on the mutual model reference adaptive system (MRAS) theory. The simulation diagram of the mutual MRAS model is constructed and the resistance identification performance is studied in different motor states. Simulation results indicate that the stator resistance identification model with the mutual MRAS is effective. At the same time, the identification of motor temperature rising is possible with the identification of the stator resistance.

  14. Final report for measurement of primary particulate matter emissions from light-duty motor vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Norbeck, J. M.; Durbin, T. D.; Truex, T. J.

    1998-12-31

    This report describes the results of a particulate emissions study conducted at the University of California, Riverside, College of Engineering-Center for Environmental Research and Technology (CE-CERT) from September of 1996 to August of 1997. The goal of this program was to expand the database of particulate emissions measurements from motor vehicles to include larger numbers of representative in-use vehicles. This work was co-sponsored by the Coordinating Research Council (CRC), the South Coast Air Quality Management District (SCAQMD), and the National Renewable Energy Laboratory (NREL) and was part of a larger study of particulate emissions being conducted in several states under sponsorship by CRC. For this work, FTP particulate mass emission rates were determined for gasoline and diesel vehicles, along with the fractions of particulates below 2.5 and 10 microns aerodynamic diameter. A total of 129 gasoline-fueled vehicles and 19 diesel-fueled vehicles were tested as part of the program.

  15. Heavy vehicle propulsion system materials program: Semiannual progress report, April 1996--September 1996

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1997-04-01

    The purpose of the Heavy Vehicle Propulsion System Materials Program is the development of materials: ceramics, intermetallics, metal alloys, and metal and ceramic coatings, to support the dieselization of class 1-3 trucks to realize a 35% fuel-economy improvement over current gasoline-fueled trucks and to support commercialization of fuel-flexible LE-55 low-emissions, high-efficiency diesel engines for class 7-8 trucks. The Office of Transportation Technologies, Office of Heavy Vehicle Technologies (OTT OHVT) has an active program to develop the technology for advanced LE-55 diesel engines with 55% efficiency and low emissions levels of 2.0 g/bhp-h NO{sub x} and 0.05 g/bhp-h particulates. The goal is also for the LE-55 engine to run on natural gas with efficiency approaching that of diesel fuel. The LE-55 program is being completed in FY 1997 and, after approximately 10 years of effort, has largely met the program goals of 55% efficiency and low emissions. However, the commercialization of the LE-55 technology requires more durable materials than those that have been used to demonstrate the goals. Heavy Vehicle Propulsion System Materials will, in concert with the heavy duty diesel engine companies, develop the durable materials required to commercialize the LE-55 technologies. OTT OHVT also recognizes a significant opportunity for reduction in petroleum consumption by dieselization of pickup trucks, vans, and sport utility vehicles. Application of the diesel engine to class 1, 2, and 3 trucks is expected to yield a 35% increase in fuel economy per vehicle. The foremost barrier to diesel use in this market is emission control. Once an engine is made certifiable, subsequent challenges will be in cost; noise, vibration, and harshness (NVH); and performance. Separate abstracts have been submitted to the database for contributions to this report.

  16. Projections of motor vehicle growth, fuel consumption and CO{sub 2} emissions for the next thirty years in China.

    Energy Technology Data Exchange (ETDEWEB)

    He, D.; Wang, M.

    2000-12-12

    Since the early 1990s, China's motor vehicles have entered a period of fast growth resultant from the rapid economic expansion. As the largest developing country, the fast growth of China's motor vehicles will have tremendous effects on the world's automotive and fuel market and on global CO{sub 2} emissions. In this study, we projected Chinese vehicle stocks for different vehicle types on the provincial level. First, we reviewed the historical data of China's vehicle growth in the past 10 years and the correlations between vehicle growth and economic growth in China. Second, we investigated historical vehicle growth trends in selected developed countries over the past 50 or so years. Third, we established a vehicle growth scenario based on the historical trends in several developed nations. Fourth, we estimated fuel economy, annual mileage and other vehicle usage parameters for Chinese vehicles. Finally, we projected vehicle stocks and estimated motor fuel use and CO{sub 2} emissions in each Chinese province from 2000 to 2030. Our results show that China will continue the rapid vehicle growth, increase gasoline and diesel consumption and increased CO{sub 2} emissions in the next 30 years. We estimated that by year 2030, Chinese motor vehicle fuel consumption and CO{sub 2} emissions could reach the current US levels.

  17. Unregulated greenhouse gas and ammonia emissions from current technology heavy-duty vehicles.

    Science.gov (United States)

    Thiruvengadam, Arvind; Besch, Marc; Carder, Daniel; Oshinuga, Adewale; Pasek, Randall; Hogo, Henry; Gautam, Mridul

    2016-11-01

    The study presents the measurement of carbonyl, BTEX (benzene, toluene, ethyl benzene, and xylene), ammonia, elemental/organic carbon (EC/OC), and greenhouse gas emissions from modern heavy-duty diesel and natural gas vehicles. Vehicles from different vocations that included goods movement, refuse trucks, and transit buses were tested on driving cycles representative of their duty cycle. The natural gas vehicle technologies included the stoichiometric engine platform equipped with a three-way catalyst and a diesel-like dual-fuel high-pressure direct-injection technology equipped with a diesel particulate filter (DPF) and a selective catalytic reduction (SCR). The diesel vehicles were equipped with a DPF and SCR. Results of the study show that the BTEX emissions were below detection limits for both diesel and natural gas vehicles, while carbonyl emissions were observed during cold start and low-temperature operations of the natural gas vehicles. Ammonia emissions of about 1 g/mile were observed from the stoichiometric natural gas vehicles equipped with TWC over all the driving cycles. The tailpipe GWP of the stoichiometric natural gas goods movement application was 7% lower than DPF and SCR equipped diesel. In the case of a refuse truck application the stoichiometric natural gas engine exhibited 22% lower GWP than a diesel vehicle. Tailpipe methane emissions contribute to less than 6% of the total GHG emissions. Modern heavy-duty diesel and natural gas engines are equipped with multiple after-treatment systems and complex control strategies aimed at meeting both the performance standards for the end user and meeting stringent U.S. Environmental Protection Agency (EPA) emissions regulation. Compared to older technology diesel and natural gas engines, modern engines and after-treatment technology have reduced unregulated emissions to levels close to detection limits. However, brief periods of inefficiencies related to low exhaust thermal energy have been shown to

  18. Urban sprawl as a risk factor in motor vehicle crashes

    Science.gov (United States)

    Ewing, Reid; Hamidi, Shima; Grace, James B.

    2016-01-01

    A decade ago, compactness/sprawl indices were developed for metropolitan areas and counties which have been widely used in health and other research. In this study, we first update the original county index to 2010, then develop a refined index that accounts for more relevant factors, and finally seek to test the relationship between sprawl and traffic crash rates using structural equation modelling. Controlling for covariates, we find that sprawl is associated with significantly higher direct and indirect effects on fatal crash rates. The direct effect is likely due to the higher traffic speeds in sprawling areas, and the indirect effect is due to greater vehicle miles driven in such areas. Conversely, sprawl has negative direct relationships with total crashes and non-fatal injury crashes, and these offset (and sometimes overwhelm) the positive indirect effects of sprawl on both types of crashes through the mediating effect of increased vehicle miles driven. The most likely explanation is the greater prevalence of fender benders and other minor accidents in the low speed, high conflict traffic environments of compact areas, negating the lower vehicle miles travelled per capita in such areas.

  19. 77 FR 59986 - General Motors Vehicle Manufacturing Including On-Site Leased Workers from Aerotek, Kelly...

    Science.gov (United States)

    2012-10-01

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration General Motors Vehicle Manufacturing Including On-Site Leased Workers from Aerotek, Kelly Services, Voith Industrial Services, Shreveport Ramp Services, Dana Holding Corporation, The Landing of GM, Filtration Services...

  20. 77 FR 62535 - General Motors Vehicle Manufacturing Including On-Site Leased Workers From Aerotek, Kelly...

    Science.gov (United States)

    2012-10-15

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration General Motors Vehicle Manufacturing Including On-Site Leased Workers From Aerotek, Kelly Services, Voith Industrial Services, Shreveport Ramp Services, Dana Holding Corporation, the Landing Of GM, Filtration Services...

  1. 77 FR 22637 - Federal Motor Vehicle Safety Standards; Accelerator Control Systems

    Science.gov (United States)

    2012-04-16

    ..., in the case of an electric drive system, attenuate the electric current driving the vehicle... assembly if signals from the pedal position sensor exceed design limits. This could occur without brake... are supplanted by electronic components including sensors, electric motors, a control module,...

  2. 75 FR 37343 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

    Science.gov (United States)

    2010-06-29

    ... Programs B. Seat Belt Reminder Systems in Europe C. Seat Belt Reminder Systems in Japan D. Seat Belt... the negative consumer reaction, Congress adopted a provision, as part of the Motor Vehicle and School... seats. C. Seat Belt Reminder Systems in Japan Japan's National Agency for Automobile Safety and Victim's...

  3. Time trend of polycyclic aromatic hydrocarbon emission factors from motor vehicles

    Science.gov (United States)

    Tao, Shu; Shen, Huizhong; Wang, Rong; Sun, Kang

    2010-05-01

    Motor vehicle is an important emission source of polycyclic aromatic hydrocarbons (PAHs) and this is particularly true in urban areas. Motor vehicle emission factors (EFs) for individual PAH compound reported in the literature varied for 4 to 5 orders of magnitude, leading to high uncertainty in emission estimation. In this study, the major factors affecting EFs were investigated and characterized by regression models. Based on the model developed, a motor vehicle PAH emission inventory at country level was developed. It was found that country and model year are the most important factors affecting EFs for PAHs. The influence of the two factors can be quantified by a single parameter of per capita gross domestic production (purchasing power parity), which was used as the independent variables of the regression models. The models developed using randomly selected 80% of measurements and tested with the remained data accounted for 28 to 48% of the variations in EFs for PAHs measured in 16 countries over 50 years. The regression coefficients of the EF prediction models were molecular weight dependent. Motor vehicle emission of PAHs from individual countries in the world in 1985, 1995, 2005, 2015, and 2025 were calculated and the global emission of total PAHs were 470, 390, and 430 Gg in 1985, 1995, and 2005 and will be 290 and 130 Gg in 2015 and 2025, respectively. The emission is currently passing its peak and will decrease due to significant decrease in China and other developing countries.

  4. Brief, Early Treatment for ASD/PTSD Following Motor Vehicle Accidents

    Science.gov (United States)

    Hickling, Edward J.; Blanchard, Edward B.; Kuhn, Eric

    2005-01-01

    Early, brief interventions for posttraumatic stress disorder (PTSD) secondary to motor vehicle accidents (MVAs) have historically been, with few exceptions, unsuccessful with single session or even very brief (3 to 6 sessions) interventions. In contrast, very intensive cognitive behavioral therapy (CBT) applied over the first 6 to 8 weeks…

  5. Identity and Apprenticeship: The Case of English Motor Vehicle Maintenance Apprentices

    Science.gov (United States)

    Brockmann, Michaela

    2010-01-01

    The paper arises from my PhD thesis on the learner biographies of retail and motor vehicle maintenance apprentices in Germany and England which explores the interrelationship of social structures and individual agency in identity formation over time and in particular learning environments. The paper reports initial findings, focusing largely on…

  6. Motor vehicle fuel economy, the forgotten HC control stragegy. [Hydrocarbon (HC)

    Energy Technology Data Exchange (ETDEWEB)

    Deluchi, M.; Wang, Quanlu; Greene, D.L.

    1992-06-01

    Emissions of hydrocarbons from motor vehicles are recognized as major contributors to ozone pollution in urban areas. Petroleum-based motor fuels contain volatile organic compounds (VOC) which, together with oxides of nitrogen, promote the formation of ozone in the troposphere via complex photochemical reactions. VOC emissions from the tailpipe and evaporation from the fuel and engine systems of highway vehicles are believed to account for about 40% of total VOC emissions in any region. But motor fuels also generate emissions throughout the fuel cycle, from crude oil production to refining, storage, transportation, and handling, that can make significant contributions to the total inventory of VOC emissions. Many of these sources of emissions are directly related to the quantity of fuel produced and handled throughout the fuel cycle. It is, therefore, reasonable to expect that a reduction in total fuel throughput might result in a reduction of VOC emissions. In particular, reducing vehicle fuel consumption by increasing vehicle fuel economy should reduce total fuel throughput, thereby cutting total emissions of VOCS. In this report we identify the sources of VOC emissions throughout the motor fuel cycle, quantify them to the extent possible, and describe their dependence on automobile and light truck fuel economy.

  7. 76 FR 49532 - Federal Motor Vehicle Safety Standards; Electronic Stability Control; Technical Report on the...

    Science.gov (United States)

    2011-08-10

    ... National Highway Traffic Safety Administration Federal Motor Vehicle Safety Standards; Electronic Stability Control; Technical Report on the Effectiveness of Electronic Stability Control Systems for Cars and LTVs... Technical Report on its existing Safety Standard 126, Electronic Stability Control Systems. The report's...

  8. Impact of motor vehicle accidents on neck pain and disability in general practice

    NARCIS (Netherlands)

    C.J. Vos (Kees); A.P. Verhagen (Arianne); J. Passchier (Jan); B.W. Koes (Bart)

    2008-01-01

    textabstractBackground: High levels of continuous neck pain after a motor vehicle accident (MVA) are reported in cross-sectional studies. Knowledge of this association in general practice is limited. Aim: To compare the differences in perceived pain and disability in patients with acute neck pain du

  9. 76 FR 5248 - Insurer Reporting Requirements; Annual Insurer Report on Motor Vehicle Theft for the 2005...

    Science.gov (United States)

    2011-01-28

    ... passenger cars. The Act also addressed several other actions to reduce motor vehicle theft, such as... taken by insurers to assist in deterring thefts. Rental and leasing companies also are required to... leasing company to which this regulation applies must submit a report annually not later than October...

  10. 77 FR 23320 - Insurer Reporting Requirements; Annual Insurer Report on Motor Vehicle Theft for the 2006...

    Science.gov (United States)

    2012-04-18

    ... cars. The Act also addressed several other actions to reduce motor vehicle theft, such as increased... assist in deterring thefts. Rental and leasing companies also are required to provide annual theft reports to the agency. In accordance with 49 CFR 544.5, each insurer, rental and leasing company to...

  11. Validity of three accelerometers during treadmill walking and motor vehicle travel.

    Science.gov (United States)

    Maddocks, Matthew; Petrou, Andrea; Skipper, Lindsay; Wilcock, Andrew

    2010-06-01

    To determine the relative accuracy during treadmill walking and motor vehicle travel of the ActivPAL, PALlite and Digi-Walker accelerometers. Forty healthy volunteers wearing all accelerometers undertook either five treadmill walks (n=20) at speeds ranging between 0.6 and 1.4 m/s or a 15 min motor vehicle journey (n=20). Step counts recorded by each accelerometer were compared with the actual step count determined by video analysis (treadmill walking) or with an actual step count of zero (motor vehicle). Mean percentage measurement error was calculated and compared between devices by one-way ANOVA and Student t test. For treadmill walking, the measurement error was lowest for the ActivPAL, with no significant differences between the ActivPAL and the PALlite monitors. The measurement error was significantly higher for the Digi-Walker at speeds of Digi-Walker (25 steps), but not the ActivPAL monitor (0 steps). The ActivPAL accelerometer accurately measures step count over a range of walking speeds and, unlike the other accelerometers tested, is not falsely triggered by motor vehicle travel.

  12. Post-purchase advertisement readership behaviour and repeat purchase intentions of motor vehicle consumers

    Directory of Open Access Journals (Sweden)

    S. Brijball

    2000-06-01

    Full Text Available The study assesses post-purchase advertisement readership behaviour and repeat purchase intentions of motor vehicle consumers. The aim is to determine the prevalence of selective exposure, and the impact of motor vehicle features and dissonance respectively. The empirical analysis was undertaken on a sample of 200 new motor vehicle buyers The results indicate that the majority of consumers do not engage in post-purchase selective advertisement readership behaviour. Furthermore, whilst motor vehicle features (make, model, dealership, month of purchases/ time lapse after purchases do not influence consumers' repeat purchase intentions, reported dissonance and the magnitude of cognitive dissonance experienced have a significant impact. Opsomming Hierdie studie evalueer die reaksie van verbruikers op advertensies nadat hulle n voertuig aangekoop het. Die doel was om vas te stel in watter n mate verbruikers selektiefis met advertensies en watter effek voertuig-eienskappe en dissonansie op die moontlikheid het om weer dieselfde voertuig te koop. Die empiriese anahse is mtgevoer op n steekproefvan 200 eicnaars van nuwe voertuie. Uit die resultate blyk dit dat die meerderheid van verbruikers me advertensies selektief lees nan aankoop me.Verder blyk dit dat die eienskappe vann motorvoertmg fabnkaat, model handelaar, maand van aankoop/tydsverloop na aankoop nie n verbruiker beinvloed om dieselfde voertuig weer te koop nie. Gerapporteerde dissonansie en die omvang van kognitiewe dissonansie na n aankoop, blyk tog 'n betekenisvolle impak te he.

  13. CURRENT VECTOR CONTROL OF PERMANENT-MAGNET SYNCHRONOUS MOTOR OF HYBRID VEHICLE ENGINE

    Directory of Open Access Journals (Sweden)

    S. Serikov

    2009-01-01

    Full Text Available Characteristics of traction permanent-magnet synchronous motor under current vector optimum control in the possible traction-speed mode area which are relevant for hybrid vehicle engine have been investigated. As a criterion of optimality a maximum of electromagnetic moment per unit of current have been taken.

  14. DEFINITION OF OUTPUT ENERGY PARAMETERS OF A VEHICLE WITH AIR MOTOR

    Directory of Open Access Journals (Sweden)

    Voronkov, A.

    2013-06-01

    Full Text Available It was made trailer-speed motion analysis of minibus GAZ-2217 with air motor instead of the internal combustion engine and recommendations allowing to determine the output power of the power plant parameters for vehicle movement at low speed in urban cycle.

  15. 77 FR 20486 - Petition for Exemption From the Vehicle Theft Prevention Standard; Mitsubishi Motors

    Science.gov (United States)

    2012-04-04

    ... National Highway Traffic Safety Administration Petition for Exemption From the Vehicle Theft Prevention Standard; Mitsubishi Motors AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of... diagram of the identity, design and location of the components of the antitheft device for the...

  16. Road traffic fatalities among pedestrians, bicyclists and mo-tor vehicle occupants in Sirjan, Kerman, Iran

    Institute of Scientific and Technical Information of China (English)

    Ghorbanali Mohammadi

    2009-01-01

    Objective: To analyze the crash and injury data in forensic medicine for years of 2004-2007. Methods: A sample of over 567 accident cases (9 pedestrians, 116 bicyclists, and 442 motor vehicle occupants) was considered from the Department of Foren-sic Medicine, Shahid Bahonar University of Kerman, in-volving drivers of all ages and covering a four-year period.Results: The male fatality rates were significantly higher than female ones. The groups at 15-30 years old and at 30-55 years old had the first and second highest numbers of deaths (40% and 34%, respectively). There were sub-stantial differences in distribution of injuries in motor ve-hicle occupants and pedestrians and bicyclists. Among motor vehicle occupants, there were more head injuries, such as skull fracture, brain contusion, subdural haemorrhage, and epidural haemorrhage. Nearly 77% of fatalities occurred during 08:00-22:00 in Sirjan. Internal bleeding was also higher in motor vehicle occupants. Pedestrians and bicyclists also had head injuries frequently.Conclusions: In spite of reduction of road traffic fatali-ties in Sirjan in 2007, it is still one of the cities with high road traffic fatality in the world. These results underline the im-portance of preventive strategies in transportation, sug-gesting that different methods are necessary to reduce fa-talities of various traffic participants.

  17. Improved SCR ac Motor Controller for Battery Powered Urban Electric Vehicles

    Science.gov (United States)

    Latos, T. S.

    1982-01-01

    An improved ac motor controller, which when coupled to a standard ac induction motor and a dc propulsion battery would provide a complete electric vehicle power train with the exception of the mechanical transmission and drive wheels was designed. In such a system, the motor controller converts the dc electrical power available at the battery terminals to ac electrical power for the induction motor in response to the drivers commands. The performance requirements of a hypothetical electric vehicle with an upper weight bound of 1590 kg (3500 lb) were used to determine the power rating of the controller. Vehicle acceleration capability, top speed, and gradeability requisites were contained in the Society of Automotive Engineers (SAE) Schedule 227a(d) driving cycle. The important capabilities contained in this driving cycle are a vehicle acceleration requirement of 0 to 72.4 kmph (0 to 45 mph) in 28 seconds a top speed of 88.5 kmph (55 mph), and the ability to negotiate a 10% grade at 48 kmph (30 mph). A 10% grade is defined as one foot of vertical rise per 10 feet of horizontal distance.

  18. Motor Vehicle and Machinery Repairers. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

    Science.gov (United States)

    Bureau of Labor Statistics (DOL), Washington, DC.

    Focusing on motor vehicle and machinery repairers, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include automobile body repairers,…

  19. 77 FR 71717 - Federal Motor Vehicle Safety Standards; Lamps, Reflective Devices, and Associated Equipment

    Science.gov (United States)

    2012-12-04

    .... 30, 2005). ] SABIC Innovative Plastics US LLC (SABIC-IP) sent a letter to NHTSA on August 11, 2008... expected to affect the cost of manufacturing motor vehicle lighting equipment. D. Executive Order 13132... expenditure by State, local or tribal governments, in the aggregate, or by the private sector, of more than...

  20. Applications for waiver of effective date of the 1981 model year carbon monoxide (CO) emission standard for light-duty motor vehicles. second consolidated decision of the administrator

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-03

    Under the amended Clean Air Act of 1978, the U.S. Environmental Protection Agency has granted a waiver of the 3.4 g/mi CO emission standard to Toyo Kogyo Co. Ltd.'s 91 and 120 CID (cubic inch displacement) 1981 model year light-duty motor vehicles and has established an interim standard of 7.0 g/mi, because these models will be unable to incorporate an effective CO control technology to meet the statutory standard by 1981 and because the public health will not be unduly threatened by non-attainment of the 3.4 g/mi standard. This decision should enable Toyo Kogyo to market two of its engines without catalyst changes. CO emission standard waivers were denied to Fuji Heavy Industries Ltd., Nissan Motor Co. Ltd., and Renault for their respective 1981 light-duty motor vehicles, and to Toyo Kogyo for two 1982 vehicles and a rotary engine, mainly because these vehicles are thought able to meet the statutory standard for 1981 and 1982 even if costs, drivability, and fuel economy are considered.

  1. Simulation of spray dispersion in a simplified heavy vehicle wake

    Energy Technology Data Exchange (ETDEWEB)

    Paschkewitz, J S

    2006-01-13

    Simulations of spray dispersion in a simplified tractor-trailer wake have been completed with the goal of obtaining a better understanding of how to mitigate this safety hazard. The Generic Conventional Model (GCM) for the tractor-trailer was used. The impact of aerodynamic drag reduction devices, specifically trailer-mounted base flaps, on the transport of spray in the vehicle wake was considered using the GCM. This analysis demonstrated that base flaps including a bottom plate may actually worsen motorist visibility because of the interaction of fine spray with large vortex flows in the wake. This work suggests that to use computational fluid dynamics (CFD) to design and evaluate spray mitigation strategies the jet or sheet breakup processes can be modeled using an array of injectors of small (< 0.1 mm) water droplets; however the choice of size distribution, injection locations, directions and velocities is largely unknown and requires further study. Possible containment strategies would include using flow structures to 'focus' particles into regions away from passing cars or surface treatments to capture small drops.

  2. Asphyxia: a rare cause of death for motor vehicle crash occupants.

    Science.gov (United States)

    Conroy, Carol; Stanley, Christina; Eastman, A Brent; Vaughan, Teresa; Vilke, Gary M; Hoyt, David B; Pacyna, Sharon; Smith, Alan

    2008-03-01

    Motor vehicle related trauma is one of the leading causes of traumatic death. Although most of these deaths are because of severe blunt force trauma, there are people without severe injury who die of asphyxia related to the motor vehicle collision. There were 37 deaths because of motor vehicle related asphyxia in San Diego County during 1995-2004. Almost half (48.6%) of these deaths were because of compression asphyxia, 29.7% were positional asphyxia deaths, and 16.2% died of a combination of compression and positional asphyxia. We were unable to classify the mechanism of asphyxia for the remaining 5.4% of asphyxia deaths. Almost all occupants dying from asphyxia were involved in rollover crashes and may have been incapacitated by obesity, drug or alcohol intoxication, or blunt force trauma. Compression asphyxia deaths occurred both from vehicle crush with intrusion into the passenger compartment and from ejection of the occupant and subsequent crushing by the vehicle. Positional asphyxia occurred in positions interfering with normal respiration, including inversion. None of the occupants had injury severe enough to result in death at the scene if they had not first died of asphyxia. This study suggests classifying the mechanism of asphyxia for these fatalities may be a challenge to forensic pathologists who seldom see these rare deaths.

  3. Work-related non-crash heavy vehicle driver fatalities in Australia, 2000-9.

    Science.gov (United States)

    Jones, Christopher B; Ibrahim, Joseph E; Ozanne-Smith, Joan

    2011-08-01

    The objective of this study was to describe the nature and mechanisms of a case series of Australian work-related non-crash heavy vehicle driver fatalities. The study used existing population-based mortality data on non-crash work-related heavy vehicle (gross vehicle mass >4.5 t) driver fatalities reported to Australian coroners between 2000 and 2009. There were 47 fatalities with a mean age of 46.5 years. Available toxicology detected that six of 16 drivers consumed illegal drugs or alcohol. The most frequent task was attending to cargo (n=22, 47%); 31 (66%) fatalities occurred when the driver was working alone. Brake issues (n=21, 45%) were the most frequent contributing factor, and crushing the most common mechanism (n=33, 70%), particularly between the vehicle and another object (n=22, 47%). Fatalities occurred in most jurisdictions averaging 4.7 per year overall. A large number of truck drivers die performing non-driving tasks. Crushing following vehicle rolling accounts for almost 50% of fatalities. Considering this pathway may provide prevention opportunities.

  4. DSP-Based Sensor Fault Detection and Post Fault-Tolerant Control of an Induction Motor-Based Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Bekheïra Tabbache

    2012-01-01

    Full Text Available This paper deals with sensor fault detection within a reconfigurable direct torque control of an induction motor-based electric vehicle. The proposed strategy concerns current, voltage, and speed sensors faults that are detected and followed by post fault-tolerant control to allow the vehicle continuous operation. The proposed approach is validated through experiments on an induction motor drive and simulations on an electric vehicle using a European urban and extraurban driving cycle.

  5. Dynamic wheelset drive load of the railway vehicle caused by short-circuit motor moment

    Directory of Open Access Journals (Sweden)

    Zeman V.

    2009-12-01

    Full Text Available The paper deals with mathematical modelling of dynamic response of the railway vehicle wheelset drives caused by short-circuit traction motor torque. The individual wheelset drive with hollow graduated shaft is one of subsystems of the two-axled vehicle bogie with two wheelset drives. The model respects the viscoelastic suspension of the both engine stators with gear housings mounted on the bogie frame and all the other couplings among bogie drive components. The dynamic response is investigated in dependence on longitudinal creepage and forward velocity of the vehicle at the moment of the sudden short-circuit in one asynchronous traction motor. The method is applied to bogie of the electric locomotive developed for speed about 200 km/h by the company ŠKODA TRANSPORTATION, s. r. o. The wheelset drive vibration is confronted with stability conditions of the whole bogie.

  6. Raising of Operating a Motor Vehicle Effects on Environment in Winter

    Science.gov (United States)

    Ertman, S. A.; Ertman, J. A.; Zakharov, D. A.

    2016-08-01

    Severe low-temperature conditions, in which considerable part of Russian Motor Park is operated, affect vehicles negatively. Cold weather causes higher fuel consumption and C02 emissions always. It is because of temperature profile changing of automobile motors, other systems and materials. For enhancement of car operation efficiency in severe winter environment the dependency of engine warm-up and cooling time on ambient air temperature and wind speed described by multifactorial mathematical models is established. -On the basis of experimental research it was proved that the coolant temperature constitutes the engine representative temperature and may be used as representative temperature of engine at large. The model of generation of integrated index for vehicle adaptability to winter operating conditions by temperature profile of engines was developed. the method for evaluation of vehicle adaptability to winter operating conditions by temperature profile of engines allows to decrease higher fuel consumption in cold climate.

  7. A dual-channel flux-switching permanent magnet motor for hybrid electric vehicles

    Science.gov (United States)

    Hua, Wei; Wu, Zhongze; Cheng, Ming; Wang, Baoan; Zhang, Jianzhong; Zhou, Shigui

    2012-04-01

    The flux-switching permanent magnet (FSPM) motor is a relatively novel brushless machine having both magnets and concentrated windings in the stator, which exhibits inherently sinusoidal PM flux-linkage, back-EMF waveforms, and high torque capability. However, in the application of hybrid electric vehicles, it is essential to prevent magnets and armature windings moving in radial direction due to the possible vibration during operation, and to ensure fault-tolerant capability. Hence, in this paper based on an original FSPM motor, a dual-channel FSPM (DC-FSPM) motor with modified structure to fix both armature windings and magnets and improved reliability is proposed for a practical 10 kW integral starter/generator (ISG) in hybrid electric vehicles. The influences of different solutions and the end-effect on the static characteristics, are evaluated based on the 2D and 3D finite element analysis, respectively. Finally, both the predicted and experimental results, compared with a prototype DC-FSPM motor and an interior PM motor used in Honda Civic, confirm that the more sinusoidal back-EMF waveform and lower torque ripple can be achieved in the DC-FSPM motor, whereas the torque is smaller under the same coil current.

  8. 75 FR 33515 - Federal Motor Vehicle Safety Standards; Electric-Powered Vehicles; Electrolyte Spillage and...

    Science.gov (United States)

    2010-06-14

    ... issuing this final rule to facilitate the development and introduction of fuel cell vehicles, a type of... so by revising the agency's standard regulating electrolyte spillage and electrical shock...

  9. Thermal management in heavy vehicles : a review identifying issues and research requirements.

    Energy Technology Data Exchange (ETDEWEB)

    Wambsganss, M. W.

    1999-01-15

    Thermal management in heavy vehicles is cross-cutting because it directly or indirectly affects engine performance, fuel economy, safety and reliability, engine/component life, driver comfort, materials selection, emissions, maintenance, and aerodynamics. It follows that thermal management is critical to the design of large (class 6-8) trucks, especially in optimizing for energy efficiency and emissions reduction. Heat rejection requirements are expected to increase, and it is industry's goal to develop new, innovative, high-performance cooling systems that occupy less space and are lightweight and cost-competitive. The state of the art in heavy vehicle thermal management is reviewed, and issues and research areas are identified.

  10. FY 2004 Annual Report: DOE Project on Heavy Vehicle Aerodynamic Drag

    Energy Technology Data Exchange (ETDEWEB)

    McCallen, R C; Salari, K; Ortega, J; Castellucci, P; Eastwood, C; Whittaker, K; DeChant, L J; Roy, C J; Payne, J L; Hassan, B; Pointer, W D; Browand, F; Hammache, M; Hsu, T; Ross, J; Satran, D; Heineck, J T; Walker, S; Yaste, D; Englar, R; Leonard, A; Rubel, M; Chatelain, P

    2004-11-18

    The objective of this report is: (1) Provide guidance to industry in the reduction of aerodynamic drag of heavy truck vehicles; and (2) Establish a database of experimental, computational, and conceptual design information, and demonstrate potential of new drag-reduction devices. The approaches used were: (1) Develop and demonstrate the ability to simulate and analyze aerodynamic flow around heavy truck vehicles using existing and advanced computational fluid dynamics (CFD) tools; (2) Through an extensive experimental effort, generate an experimental data base for code validation; (3) Using experimental data base, validate computations; (4) Provide industry with design guidance and insight into flow phenomena from experiments and computations; and (5) Investigate aero devices (e.g., base flaps, tractor-trailer gap stabilizer, underbody skirts and wedges, blowing and acoustic devices), provide industry with conceptual designs of drag reducing devices, and demonstrate the full-scale fuel economy potential of these devices.

  11. July 2004 Working Group Meeting on Heavy Vehicle Aerodynamic Drag: Presentation, Summary of Comments, and Conclusions

    Energy Technology Data Exchange (ETDEWEB)

    McCallen, R; Salari, K; Ortega, J; Castellucci, P; Eastwood, C; DeChant, L; Hassan, B; Browand, F; Arcas, D; Ross, J; Heineck, J; Storms, B; Walker, S; Leonard, A; Roy, C; Whitfield, D; Pointer, D; Sofu, T; Englar, R; Funk, R

    2004-08-17

    A Working Group Meeting on Heavy Vehicle Aerodynamic Drag was held in Portland, Oregon on July 1, 2004. The purpose of the meeting was to provide a summary of achievements, discuss pressing issues, present a general overview of future plans, and to provide a forum for dialogue with the Department of Energy (DOE) and industry representatives. The meeting was held in Portland, because the DOE Aero Team participated in an exclusive session on Heavy Truck Vehicle Aerodynamic Drag at the 34th AIAA Fluid Dynamics Conference and Exhibit in Portland on the morning of July 1st, just preceding our Working Group meeting. Even though the paper session was on the last day of the Conference, the Team presented to a full room of interested attendees.

  12. Too individualistic for safety culture? Non-traffic related work safety among heavy goods vehicle drivers

    DEFF Research Database (Denmark)

    Grytnes, Regine; Shibuya, Hitomi; Dyreborg, Johnny

    2016-01-01

    Introduction This article reports on a study of non-traffic related work safety among drivers of heavy goods vehicles in Denmark. In the heavy goods vehicle transport (HGV) sector only 6.4% of workplace accidents involving drivers are traffic related. HGV work is characterised by solitary work...... values and attitudes as well as organisational and technical aspects in relation to how individualist or collectivist understandings of risk and safety influence the working environment in HGVs. Method The study applied a mixed methods approach and in this article the qualitative interviews conducted...... their understandings and attitudes towards hazards and safety practices. The analysis points to risk-taking and unsafe practices as prevalent among HGV drivers, who often refer to risk as trivial and the management of such risks as one's own responsibility. Knowledge of how to manage risks in everyday practice...

  13. The performance and efficiency of four motor/controller/battery systems for the simpler electric vehicles

    Science.gov (United States)

    Shipps, P. R.

    1980-05-01

    A test and analysis program performed on four complete propulsion systems for an urban electric vehicle (EV) is described and results given. A dc series motor and a permanent magnet (PM) motor were tested, each powered by an EV battery pack and controlled by (1) a series/parallel voltage-switching (V-switch) system; and (2) a system using a pulse width modulation, 400 Hz transistorized chopper. Dynamometer tests were first performed, followed by eV performance predictions and data correlating road tests. During dynamometer tests using chopper control; current, voltage, and power were measured on both the battery and motor sides of the chopper, using three types of instrumentation. Conventional dc instruments provided adequate accuracy for eV power and energy measurements, when used on the battery side of the controller. When using the chopper controller, the addition of a small choke inductor improved system efficiency in the lower duty cycle range (some 8% increase at 50% duty cycle) with both types of motors. Overall system efficiency rankings during road tests were: (1) series motor with V-switch; (2) PM motor with V-switch; (3) series motor with chopper; and (4) PM motor with chopper. Chopper control of the eV was smoother and required less driver skill than V-switch control.

  14. CALCULATION OF A MECHANICAL CHARACTERISTIC OF ELECTRIC TRACTION MOTOR OF ELECTRIC VEHICLE

    Directory of Open Access Journals (Sweden)

    Phuong Le Ngo

    2017-01-01

    Full Text Available The traction characteristic of an electric vehicle is the main characteristic of mechanical system that reflects its key performance indicators. Implementation of the traction characteristic is based on controlling angular speed and torque of electric traction motor in an automatic control system. The static mechanical characteristic of an electric traction motor in an automatic control system is the most important characteristic that determines weight, size and operating characteristics of an electric traction motor and serves as the basis for design. The most common variants of constructive implementation of a traction electric drive are analyzed, and a scheme is chosen for further design. Lagrange’s equation for electric mechanical system with one degree of freedom is written in generalized coordinates. In order to determine the generalized forces, elementary operation of all moments influencing on a moving car has been calculated. The resulting equation of motion of the electric vehicle corresponding to the design scheme, as well as the expressions for calculation of characteristic points of static mechanical characteristics of traction motor (i.e. the maximum and minimum time, minimum power are obtained. In order to determine the nominal values of the angular velocity and the power of electric traction motor, a method based on ensuring the movement of the vehicle in the standard cycle has been developed. The method makes it possible to calculate characteristic points of the mechanical characteristic with the lowest possible power rating. The algorithm for calculation of mechanical characteristics of the motor is presented. The method was applied to calculate static mechanical characteristic of an electric traction motor for a small urban electric truck.

  15. Vehicle Fleet Information - BMV_LICENSE_BRANCHES_IN: Bureau of Motor Vehicle License Branch Locations in Indiana (Indiana Geological Survey, Point Shapefile)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — BMV_LICENSE_BRANCHES_IN is a point shapefile showing the locations of 142 branch offices of the Indiana Bureau of Motor Vehicles (BMV). Addresses for each branch...

  16. Heavy vehicle propulsion system materials program semiannual progress report for April 1999 through September 1999

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    2000-01-01

    The purpose of the Heavy Vehicle Propulsion System Materials Program is the development of materials: ceramics, intermetallics, metal alloys, and metal and ceramic coatings, to support the dieselization of class 1-3 trucks to realize a 35% fuel-economy improvement over current gasoline-fueled trucks and to support commercialization of fuel-flexible LE-55 low-emissions, high-efficiency diesel engines for class 7-8 trucks.

  17. Motor Vehicle Emission Modeling and Software Simulation Computing for Roundabout in Urban City

    Directory of Open Access Journals (Sweden)

    Haiwei Wang

    2013-01-01

    Full Text Available In urban road traffic systems, roundabout is considered as one of the core traffic bottlenecks, which are also a core impact of vehicle emission and city environment. In this paper, we proposed a transport control and management method for solving traffic jam and reducing emission in roundabout. The platform of motor vehicle testing system and VSP-based emission model was established firstly. By using the topology chart of the roundabout and microsimulation software, we calculated the instantaneous emission rates of different vehicle and total vehicle emissions. We argued that Integration-Model, combing traffic simulation and vehicle emission, can be performed to calculate the instantaneous emission rates of different vehicle and total vehicle emissions at the roundabout. By contrasting the exhaust emissions result between no signal control and signal control in this area at the rush hour, it draws a conclusion that setting the optimizing signal control can effectively reduce the regional vehicle emission. The proposed approach has been submitted to a simulation and experiment that involved an environmental assessment in Satellite Square, a roundabout in medium city located in China. It has been verified that setting signal control with knowledge engineering and Integration-Model is a practical way for solving the traffic jams and environmental pollution.

  18. Application for certification 1982 model year heavy-duty diesel engines - General Motors

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing.

  19. Development of Pneumatic Aerodynamic Devices to Improve the Performance, Economics, and Safety of Heavy Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Robert J. Englar

    2000-06-19

    Under contract to the DOE Office of Heavy Vehicle Technologies, the Georgia Tech Research Institute (GTRI) is developing and evaluating pneumatic (blown) aerodynamic devices to improve the performance, economics, stability and safety of operation of Heavy Vehicles. The objective of this program is to apply the pneumatic aerodynamic aircraft technology previously developed and flight-tested by GTRI personnel to the design of an efficient blown tractor-trailer configuration. Recent experimental results obtained by GTRI using blowing have shown drag reductions of 35% on a streamlined automobile wind-tunnel model. Also measured were lift or down-load increases of 100-150% and the ability to control aerodynamic moments about all 3 axes without any moving control surfaces. Similar drag reductions yielded by blowing on bluff afterbody trailers in current US trucking fleet operations are anticipated to reduce yearly fuel consumption by more than 1.2 billion gallons, while even further reduction is possible using pneumatic lift to reduce tire rolling resistance. Conversely, increased drag and down force generated instantaneously by blowing can greatly increase braking characteristics and control in wet/icy weather due to effective ''weight'' increases on the tires. Safety is also enhanced by controlling side loads and moments caused on these Heavy Vehicles by winds, gusts and other vehicles passing. This may also help to eliminate the jack-knifing problem if caused by extreme wind side loads on the trailer. Lastly, reduction of the turbulent wake behind the trailer can reduce splash and spray patterns and rough air being experienced by following vehicles. To be presented by GTRI in this paper will be results developed during the early portion of this effort, including a preliminary systems study, CFD prediction of the blown flowfields, and design of the baseline conventional tractor-trailer model and the pneumatic wind-tunnel model.

  20. 40 CFR 80.595 - How does a small or GPA refiner apply for a motor vehicle diesel fuel volume baseline for the...

    Science.gov (United States)

    2010-07-01

    ... for a motor vehicle diesel fuel volume baseline for the purpose of extending their gasoline sulfur... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Motor Vehicle Diesel Fuel; Nonroad, Locomotive... a small or GPA refiner apply for a motor vehicle diesel fuel volume baseline for the purpose...