WorldWideScience

Sample records for heat island phenomenon

  1. Urban Heat Island phenomenon in extreme continental climate (Astana, Kazakhstan)

    Science.gov (United States)

    Konstantinov, Pavel; Akhmetova, Alina

    2015-04-01

    Urban Heat Island (UHI) phenomenon is well known in scientific literature since first half of the 19th century [1]. By now a wide number of world capitals is described from climatological point of view, especially in mid-latitudes. In beginning of XXI century new studies focus on heat island of tropical cities. However dynamics UHI in extreme continental climates is insufficiently investigated, due to the fact that there isn't large cities in Europe and Northern America within that climate type. In this paper we investigate seasonal and diurnal dynamics UHI intensity for Astana, capital city of Kazakhstan (population larger than 835 000 within the city) including UHI intensity changes on different time scales. Now (since 1998) Astana is the second coldest capital city in the world after Ulaanbaatar, Mongolia [3] For this study we use the UHI investigation technology, described in [2]. According to this paper, we selected three stations: one located into city in high and midrise buildings area (including extensive lowrise and high-energy industrial - LCZ classification) and two others located in rural site (sparsely built or open-set and lightweight lowrise according LCZ classification). Also these stations must be close by distance (less than 100 km) and altitude. Therefore, first for Astana city were obtained numerical evaluations for UHI climate dynamics, UHI dependence of synoptic situations and total UHI climatology on monthly and daily averages. References: 1.Howard, L. (1833) The Climate of London, Deduced from Meteorological Observations. Volume 2, London. 2.Kukanova E.A., Konstantinov P.I. An urban heat islands climatology in Russia and linkages to the climate change In Geophysical Research Abstracts, volume 16 of EGU General Assembly, pages EGU2014-10833-1, Germany, 2014. Germany. 3.www.pogoda.ru.net

  2. Heat Islands

    Science.gov (United States)

    EPA's Heat Island Effect Site provides information on heat islands, their impacts, mitigation strategies, related research, a directory of heat island reduction initiatives in U.S. communities, and EPA's Heat Island Reduction Program.

  3. Study of the heat island phenomenon in large cities and the measures to prevent it; Daitoshi ni okeru heat island gensho to sono taisaku ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Kawasaki, T.; Ishitani, H.; Matsuhashi, T. [The University of Tokyo, Tokyo (Japan). Faculty of Engineering

    1997-01-30

    The paper made an analysis of the heat island phenomenon in the Kanto area using 3-D numerical analysis models and a study on the effectiveness of the measures to prevent it. The models are composed of advection/diffusion models of heat/steam in the wind-velocity field and atmospheric air, heat diffusion models in the underground and undersea, and heat balance models on the ground surface and sea surface. In the calculation, a simulation was conducted of the case of taking the following three measures: the case where the exhaust heat was reduced 30% in the assumed typical day of summer; the case where the heat volume of buildings/trunk roads was reduced; the case where the evaporation efficiency of buildings/trunk roads was raised. The result of the study was as follows: The reduction effect of the exhaust heat is totally large, but precisely observing, some meshes contrarily showed rises in temperature in the suburbs. Also in the case of reducing the heat volume, the same phenomenon occurred, but the effect was large in the center of a city. It was found that the effect was unexpectedly large in the case of increasing the evaporation efficiency. 7 refs., 14 figs., 2 tabs.

  4. The Urban Heat Island phenomenon modelling and analysis as an adaptation of Maghreb cities to climate change

    Directory of Open Access Journals (Sweden)

    Ouali Kaoutar

    2018-01-01

    Full Text Available The modeling of the urban microclimate, in particular the phenomenon of the Urban Heat Island (UHI, is becoming increasingly essential for city planning and urban design. The phenomenon analysis is henceforth possible thanks to the increase in computational power, the link between simulation tools and urban databases, which allow to represent explicitly the characteristics of the urban microclimate and to better understand its effects, through the analysis and evaluation of the different impacts of the urban climatic or anthropogenic contributors (urban morphology, land use, building sites, albedo, …. However, the choice of the scaleof the study depends on a balance between the precision of the modeling, the capacities of calculation and the availability and reliability of the data.The UHI phenomenon has been the subject of several research studies in the European countries since the 2000s. Thispaper focuses mainly on the description of the phenomenon, the different methodsused to evaluate and modeled its impacts, using some approaches for mitigating these ones.The contribution aims to highlight the phenomenon of the UHI based on a bibliographic study of the latest research on this topic in Maghreb cities.The state of art focuses on the progress made during the last 15 years taking into account the UHI in the different strategies for adapting cities to climate change and for improving their resilience.

  5. Land Use and Land Cover Change, Urban Heat Island Phenomenon, and Health Implications: A Remote Sensing Approach

    Science.gov (United States)

    Lo, C. P.; Quattrochi, Dale A.

    2003-01-01

    Land use and land cover maps of Atlanta Metropolitan Area in Georgia were produced from Landsat MSS and TM images for 1973,1979,1983,1987,1992, and 1997, spanning a period of 25 years. Dramatic changes in land use and land cover have occurred with loss of forest and cropland to urban use. In particular, low-density urban use, which includes largely residential use, has increased by over 119% between 1973 and 1997. These land use and land cover changes have drastically altered the land surface characteristics. An analysis of Landsat images revealed an increase in surface temperature and a decline in NDVI from 1973 to 1997. These changes have forced the development of a significant urban heat island effect and an increase in ground level ozone production to such an extent, that Atlanta has violated EPA's ozone level standard in recent years. The urban heat island initiated precipitation events that were identified between 1996 and 2000 tended to occur near high-density urban areas but outside the I-285 loop that traverses around the Central Business District, i.e. not in the inner city area, but some in close proximity to the highways. The health implications were investigated by comparing the spatial patterns of volatile organic compounds (VOC) and nitrogen oxides (NOx) emissions, the two ingredients that form ozone by reacting with sunlight, with those of rates of cardiovascular and chronic lower respiratory diseases. A clear core-periphery pattern was revealed for both VOC and NOx emissions, but the spatial pattern was more random in the cases of rates of cardiovascular and chronic lower respiratory diseases. Clearly, factors other than ozone pollution were involved in explaining the rates of these diseases. Further research is therefore needed to understand the health geography and its relationship to land use and land cover change as well as urban heat island effect. This paper illustrates the usefulness of a remote sensing approach for this purpose.

  6. Heat Island Compendium

    Science.gov (United States)

    Heat islands can be mitigated through measures like planting trees and vegetation, installing green roofs and cool roofs, and using cool pavements. The compendium describes all of these strategies and shows how communities around the country are being used

  7. The influence of urban heat island phenomenon on PM concentration: an observation study during the summer half-year in metropolitan Taipei, Taiwan

    Science.gov (United States)

    Lai, Li-Wei

    2018-01-01

    Air circulation due to the urban heat island (UHI) effect can influence the dispersion of air pollutants in a metropolis. This study focusses on the influence of the UHI effect on particulate matter (PM; including PM2.5 and PM2.5-10) between May and September 2010-2012 in the Taipei basin. Meteorological and PM data were obtained from the sites, owned by the governmental authorities. The analysis was carried out using t test, relative indices (RIs), Pearson product-moment correlation and stepwise regression. The results show that the RI values for PM were the highest at moderate UHI intensity (MUI; 2 °C ≤ UHI < 4 °C) rather than at strong UHI intensity (SUI; 4 °C ≤ UHI) during the peak time for anthropogenic emissions (20:00 LST). Neither the accumulation of PM nor the surface convergence occurred in the hot centre, as shown by the case study. At MUI, more than 89 % of the synoptic weather patterns showed that the weather was clear and hot or that the atmosphere was stable. The variation in PM was associated with horizontal and vertical air dispersion. Poor horizontal air dispersion, with subsidence, caused an increase in PM at MUI. However, the updraft motion diluted the PM at SUI. The stepwise regression models show that the cloud index and surface air pressure determined the variation in PM2.5-10, while cloud index, wind speed and mixing height influenced the variation in PM2.5. In conclusion, a direct relationship between UHI effect and PM was not obvious.

  8. Urban heat island 1

    DEFF Research Database (Denmark)

    Bühler, Oliver; Jensen, Marina Bergen; Petersen, Karen Sejr

    2010-01-01

    Urban Heat Island beskriver det forhold, at temperaturen i byområder er højere end temperaturen i tilgrænsede landområder. Årsagen hertil ligger i den urbane arealanvendelse, hvor en mindre andel af arealerne er dækket af vegetation, og en større andel består af forseglede arealer.......Urban Heat Island beskriver det forhold, at temperaturen i byområder er højere end temperaturen i tilgrænsede landområder. Årsagen hertil ligger i den urbane arealanvendelse, hvor en mindre andel af arealerne er dækket af vegetation, og en større andel består af forseglede arealer....

  9. Study on Boiling Heat Transfer Phenomenon in Micro-channels

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Namgyun [Inha Technical College, Incheon (Korea, Republic of)

    2017-09-15

    Recently, efficient heat dissipation has become necessary because of the miniaturization of devices, and research on boiling on micro-channels has attracted attention. However, in the case of micro-channels, the friction coefficient and heat transfer characteristics are different from those in macro-channels. This leads to large errors in the micro scale results, when compared to correlations derived from the macro scale. In addition, due to the complexity of the mechanism, the boiling phenomenon in micro-channels cannot be approached only by experimental and theoretical methods. Therefore, numerical methods should be utilized as well, to supplement these methods. However, most numerical studies have been conducted on macro-channels. In this study, we applied the lattice Boltzmann method, proposed as an alternative numerical tool to simulate the boiling phenomenon in the micro-channel, and predicted the bubble growth process in the channel.

  10. Urban Heat Island Effect Actions - Neighborhood Data

    Data.gov (United States)

    Louisville Metro Government — The urban heat island effect — defined as the difference in temperature between the core of Louisville and its suburbs — contributes to heat-related illnesses and...

  11. The urban heat island in Akron, Ohio

    Science.gov (United States)

    Frank P. Martin; Grace L. Powell

    1977-01-01

    Data gathered by automobile traverse were used to describe the urban heat of Akron, Ohio. Observations were made at 2100 or 2200 EST on four nights-17 April, 11 July, 10 October, and 2 January. Weather conditions not conducive to heat-island development were avoided. Temperatures in the center of the heat island were 6 to 14?F warmer than rural areas outside the city....

  12. The urban heat island dynamics during heat waves: a study of cities in the United States

    Science.gov (United States)

    Hu, Leiqiu

    2016-04-01

    The urban heat island (UHI) is a common phenomenon describing that metropolitan areas are usually warmer than their rural surroundings. This effect is compounded by extreme heat events, which are a leading cause of weather-related human mortality in many countries worldwide. However, the spatial and diurnal variability of temperature and humidity in urban and adjacent rural areas during extreme heat events is not well measured and therefore not well understood. The recently developed dataset of near-surface air and dew temperature from MODIS atmospheric profiles and the new method for the UHI quantification--urban heat island curve are used to quantify the urban climatic changes during heat waves in cities of the United States. The enhanced and weakened UHIs are observed in various cities. The causes of UHI changes during heat waves are discussed, including climate region, vegetation type and amount, city geolocation, etc.

  13. Agriculture and irrigation as potential drivers of urban heat island

    Science.gov (United States)

    Kumar, R.; Buzan, J. R.; Mishra, V.; Kumar, R.; Shindell, D. T.; Huber, M.

    2017-12-01

    More than half the population are urban dwellers and are most vulnerable to global environmental changes. Urban extents are more prone to intense heating as compared to the surroundings rural area. Presently about 33% of India's population lives in the urban area and is expected to rise steeply, so a better understanding of the phenomenon affecting the urban population is very much important. Urban Heat Island (UHI) is a well-known phenomenon which potentially affects energy consumption, spreading of diseases and mortality. In general, almost all (90%) of the major urban area of the country faces UHI at night time in the range (1-5 °C) while 60% of the regions face Urban Cool Island (UCI) in the range of -1 to 6 °C in day time. Our observations and simulations show that vegetation and irrigation in the surrounding non urban directly affects day time Urban Cool Island effects. This is due to the relative cooling by vegetation and irrigated lands in the vicinity of these urban regions. There is a contrasting variation in UHI/UCI intensities in different seasons and in different time of the day. Most of the urban regions face UHI effect in summers whereas this phenomenton reverses in winters. Daytime UCI is more prominent in the months of April and May due to minimum availability of moisture. We observed that apart from vegetation and irrigation, aerosol is also an important factor governing UHI phenomenon.

  14. Role of City Texture in Urban Heat Islands at Nighttime

    Science.gov (United States)

    Sobstyl, J. M.; Emig, T.; Qomi, M. J. Abdolhosseini; Ulm, F.-J.; Pellenq, R. J.-M.

    2018-03-01

    An urban heat island (UHI) is a climate phenomenon that results in an increased air temperature in cities when compared to their rural surroundings. In this Letter, the dependence of an UHI on urban geometry is studied. Multiyear urban-rural temperature differences and building footprints data combined with a heat radiation scaling model are used to demonstrate for more than 50 cities worldwide that city texture—measured by a building distribution function and the sky view factor—explains city-to-city variations in nocturnal UHIs. Our results show a strong correlation between nocturnal UHIs and the city texture.

  15. Satellite air temperature estimation for monitoring the canopy layer heat island of Milan

    DEFF Research Database (Denmark)

    Pichierri, Manuele; Bonafoni, Stefania; Biondi, Riccardo

    2012-01-01

    across the city center from June to September confirming that, in Milan, urban heating is not an occasional phenomenon. Furthermore, this study shows the utility of space missions to monitor the metropolis heat islands if they are able to provide nighttime observations when CLHI peaks are generally......In this work, satellite maps of the urban heat island of Milan are produced using satellite-based infrared sensor data. For this aim, we developed suitable algorithms employing satellite brightness temperatures for the direct air temperature estimation 2 m above the surface (canopy layer), showing...... 2007 and 2010 were processed. Analysis of the canopy layer heat island (CLHI) maps during summer months reveals an average heat island effect of 3–4K during nighttime (with some peaks around 5K) and a weak CLHI intensity during daytime. In addition, the satellite maps reveal a well defined island shape...

  16. Cooling urban heat islands with sustainable landscapes

    Science.gov (United States)

    E. Gregory McPherson

    1994-01-01

    This paper is directed to the policy-makers who are responsible for urban design and its climatological consequences. It summarizes our current knowledge on the structure, energetics, and mitigation of the urban heat island. Special attention is given to physical features of the environment that can be easily manipulated, particularly vegetation. Prototypical designs...

  17. Urban environment and vegetation: comfort and urban heat island mitigation

    Directory of Open Access Journals (Sweden)

    Adriano Magliocco

    2014-10-01

    Full Text Available This paper analyses the outcomes of an experimental simulation on the microclimatic effects and on thermal comfort of vegetation in urban environment, conducted by means of a three-dimensional microclimate model, ENVI- met 3.1. The simulation considers a wide range of hypothetical cases of typical city areas with different characteristics related to: building density, building height, vegetation type and density. The results of the study show how different combinations of amount and type of vegetation, density and height of buildings affect the urban heat island phenomenon in Mediterranean climate.

  18. Stabilization of sawtooty oscillation by island heating

    International Nuclear Information System (INIS)

    Park, W.; Monticello, D.A.; Chu, T.K.

    1986-10-01

    Using the compressible resistive MHD equations in a finite aspect ratio cylinder, it is found that the m = 1 mode (the sawtooth oscillation) can saturate when the pressure inside the magnetic island is higher than that of the original core plasma. The saturation condition is of the form Δβ/sub p/ ≥ 8 ε -1 /sub q = 1/ (1 - q 0 ) 2 . This saturation effect can be used to actively stabilize sawteeth by heating the island and/or by cooling the core plasma. This mechanism together with a stabilizing toroidal effect may also explain recent lower-hybrid-wave-driven tokamak experiments where the saturation of sawteeth has been observed

  19. Adaptation measures for climate change and the urban heat island in Japan's built environment

    International Nuclear Information System (INIS)

    Shimoda, Y.

    2003-01-01

    Climate change scenarios are discussed for Japan with clear implications drawn for the built environment in terms of increased temperatures of 4-5 o C, rising sea levels and subterranean water tables. Research on the impacts and adaptation measures for global warming in Japan is reviewed. One of the most significant impacts of climate change in Japan will exacerbate the existing heat island phenomenon in cities by absorbing increased solar radiation. This will lead to further increases in temperatures in an urban microclimate with negative implications for energy and water consumption, human health and discomfort, and local ecosystems. The current urban heat island phenomenon and its impacts are described. The relationships between climate change and urban heat island impacts are discussed. Potential adaptation measures to those impacts are also discussed and proposed. (author)

  20. The urban physical environment: temperature and urban heat islands. Chapter 2

    Science.gov (United States)

    Gordon M. Heisler; Anthony J. Brazel

    2010-01-01

    The term urban heat island (UHI) describes the phenomenon in which cities are generally warmer than adjacent rural areas. The UHI effect is strongest with skies free of clouds and with low wind speeds. In moist temperate climates, the UHI effect causes cities to be slightly warmer in midday than rural areas, whereas in dry climates, irrigation of vegetation in cites...

  1. FY1995 comprehensive assessments of measures mitigating heat island phenomena in urban areas; 1995 nendo heat shinku wo riyoshita daikibo reibo system no kaihatsu (daitoshi ni okeru kaki koonka taisaku gijutsu no hyoka shuho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The urban heat-island phenomenon is one of the man-made changes of local climate. The objectives of this research are to develop a heat-island model to cover the building scale to mesoscale and to assess the countermeasures to heat- island effects. The analysis of Tokyo by remote-sensing, field observation and estimates of anthropogenically exhausted heat using energy consumption data were conducted. And, techniques to assess the most effective countermeasure against the urban warming were developed. (NEDO)

  2. Can Aerosol Offset Urban Heat Island Effect?

    Science.gov (United States)

    Jin, M. S.; Shepherd, J. M.

    2009-12-01

    The Urban Heat Island effect (UHI) refers to urban skin or air temperature exceeding the temperatures in surrounding non-urban regions. In a warming climate, the UHI may intensify extreme heat waves and consequently cause significant health and energy problems. Aerosols reduce surface insolation via the direct effect, namely, scattering and absorbing sunlight in the atmosphere. Combining the National Aeronautics and Space Administration (NASA) AERONET (AErosol RObotic NETwork) observations over large cities together with Weather Research and Forecasting Model (WRF) simulations, we find that the aerosol direct reduction of surface insolation range from 40-100 Wm-2, depending on seasonality and aerosol loads. As a result, surface skin temperature can be reduced by 1-2C while 2-m surface air temperature by 0.5-1C. This study suggests that the aerosol direct effect is a competing mechanism for the urban heat island effect (UHI). More importantly, both aerosol and urban land cover effects must be adequately represented in meteorological and climate modeling systems in order to properly characterize urban surface energy budgets and UHI.

  3. Paving materials for heat island mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Pomerantz, M.; Akbari, H.; Chen, A.; Taha, H. [Lawrence Berkeley National Lab., CA (United States); Rosenfeld, A.H. [Dept. of Energy, Washington, DC (United States)

    1997-11-01

    This report summarizes paving materials suitable for urban streets, driveways, parking lots and walkways. The authors evaluate materials for their abilities to reflect sunlight, which will reduce their temperatures. This in turn reduces the excess air temperature of cities (the heat island effect). The report presents the compositions of the materials, their suitability for particular applications, and their approximate costs (in 1996). Both new and resurfacing are described. They conclude that, although light-colored materials may be more expensive than conventional black materials, a thin layer of light-colored pavement may produce energy savings and smog reductions whose long-term worth is greater than the extra cost.

  4. Fundamental research on supercooling phenomenon on heat transfer surface

    International Nuclear Information System (INIS)

    Saito, A.; Okawa, S.; Koganezawa, S.

    1991-01-01

    In relation to the problem of supercooling for ice storage devices, experiments on freezing a relatively large volume of supercooled water is carried out. In the experiment, an experimental method to determine a probability of freezing a large volume of supercooled water with a uniform temperature distribution is introduced. It is accomplished by dividing the water into many smaller droplets. In a statistical analysis, a method to improve an accuracy in a case of having a limited number of experiments is introduced, and the probability of freezing is calculated for each degree of supercooling. The average freezing temperature for the experiment is placed just at the extended region of the other researchers results worked on small droplets. By relating the value with the probability of freezing on various kinds of heat transfer surfaces, the probability of freezing which is independent of the surface is calculated. In this paper it is confirmed to be negligible compared with the one on the surface

  5. Subsurface urban heat islands in German cities.

    Science.gov (United States)

    Menberg, Kathrin; Bayer, Peter; Zosseder, Kai; Rumohr, Sven; Blum, Philipp

    2013-01-01

    Little is known about the intensity and extension of subsurface urban heat islands (UHI), and the individual role of the driving factors has not been revealed either. In this study, we compare groundwater temperatures in shallow aquifers beneath six German cities of different size (Berlin, Munich, Cologne, Frankfurt, Karlsruhe and Darmstadt). It is revealed that hotspots of up to +20K often exist, which stem from very local heat sources, such as insufficiently insulated power plants, landfills or open geothermal systems. When visualizing the regional conditions in isotherm maps, mostly a concentric picture is found with the highest temperatures in the city centers. This reflects the long-term accumulation of thermal energy over several centuries and the interplay of various factors, particularly in heat loss from basements, elevated ground surface temperatures (GST) and subsurface infrastructure. As a primary indicator to quantify and compare large-scale UHI intensity the 10-90%-quantile range UHII(10-90) of the temperature distribution is introduced. The latter reveals, in comparison to annual atmospheric UHI intensities, an even more pronounced heating of the shallow subsurface. Copyright © 2012 Elsevier B.V. All rights reserved.

  6. Interactions between urban heat islands and heat waves

    Science.gov (United States)

    Zhao, Lei; Oppenheimer, Michael; Zhu, Qing; Baldwin, Jane W.; Ebi, Kristie L.; Bou-Zeid, Elie; Guan, Kaiyu; Liu, Xu

    2018-03-01

    Heat waves (HWs) are among the most damaging climate extremes to human society. Climate models consistently project that HW frequency, severity, and duration will increase markedly over this century. For urban residents, the urban heat island (UHI) effect further exacerbates the heat stress resulting from HWs. Here we use a climate model to investigate the interactions between the UHI and HWs in 50 cities in the United States under current climate and future warming scenarios. We examine UHI2m (defined as urban-rural difference in 2m-height air temperature) and UHIs (defined as urban-rural difference in radiative surface temperature). Our results show significant sensitivity of the interaction between UHI and HWs to local background climate and warming scenarios. Sensitivity also differs between daytime and nighttime. During daytime, cities in the temperate climate region show significant synergistic effects between UHI and HWs in current climate, with an average of 0.4 K higher UHI2m or 2.8 K higher UHIs during HWs than during normal days. These synergistic effects, however, diminish in future warmer climates. In contrast, the daytime synergistic effects for cities in dry regions are insignificant in the current climate, but emerge in future climates. At night, the synergistic effects are similar across climate regions in the current climate, and are stronger in future climate scenarios. We use a biophysical factorization method to disentangle the mechanisms behind the interactions between UHI and HWs that explain the spatial-temporal patterns of the interactions. Results show that the difference in the increase of urban versus rural evaporation and enhanced anthropogenic heat emissions (air conditioning energy use) during HWs are key contributors to the synergistic effects during daytime. The contrast in water availability between urban and rural land plays an important role in determining the contribution of evaporation. At night, the enhanced release of stored

  7. Analysis of the effect of local heat island in Seoul using LANDSAT image

    Science.gov (United States)

    Lee, K. I.; Ryu, J.; Jeon, S. W.

    2017-12-01

    The increase in the rate of industrialization due to urbanization has caused the Urban Heat Island phenomenon which means that the temperature of the city is higher than the surrounding area, and its intensity is increasing with climate change. Among the cities where heat island phenomenon occur, Seoul city has different degree of urbanization, green area ratio, energy consumption, and population density by each district unit. As a result, the strength of heat island phenomenon is also different. The average maximum temperature in each region may differ by more than 3 °, which is bigger than the suburbs in Seoul and it means that analysis of UHI effect by regional unit is needed. Therefore, this study is to extract the UHI Intensity of the regional unit of the Seoul Metropolitan City using the satellite image, analyzed the difference of intensity according to the regional unit. And do linear regression analysis with variables included in three categories(regional meteorological conditions, anthropogenic heat generation, land use factors). As a result, The UHI Intensity value of the Gu unit is significantly different from the UHI Intensity distribution of the Dong unit. The variable having the greatest positive correlation with UHI Intensity was NDBI(Normalized Difference Built-up Index) which shows the distribution of urban area, and Urban area ratio also has high correlation. There was a negative correlation between mean wind speed but there was no significant correlation between population density and power consumption. The result of this study is to identify the regional difference of UHI Intensity and to identify the factors inducing heat island phenomenon. so It is expected that it will provide direction in urban thermal environment design and policy development in the future.

  8. Modeling the scooping phenomenon for the heat transfer in liquid–gas horizontal slug flows

    International Nuclear Information System (INIS)

    Bassani, Carlos L.; Pereira, Fernando H.G.; Barbuto, Fausto A.A.; Morales, Rigoberto E.M.

    2016-01-01

    Highlights: • A low computational tool for heat transfer prediction on slug flows is presented. • The scooping phenomenon is modeled on a stationary approach. • The scooping phenomenon improved in 8% the heat transfer results. - Abstract: The heat transfer between the deep sea waters and the oil and gas mixtures flowing through production lines is a common situation in the petroleum industry. The optimum prediction of the liquid–gas flow parameters along those lines, when the intermittent flow pattern known as slug flow is dominant, has extreme importance in facilities' design. The mixture temperature drop caused by the colder sea waters, which can be regarded as an infinite medium with constant temperature, directly affects physical properties of the fluids such as the viscosity and specific mass. Gas expansion may also occur due to pressure and temperature gradients, thus changing the flow hydrodynamics. Finally, the temperature gradient affects the thermodynamic equilibrium between the phases, favoring wax deposition and thus increasing pressure drops or even blocking the production line. With those issues in mind, the present work proposes a stationary model to predict the mixture temperature distribution and the two-phase flow heat transfer coefficient based on the mass, momentum and energy conservation equations applied to different unit cell regions. The main contribution of the present work is the modeling of the thermal scooping phenomenon, i.e., the heat transfer between two adjacent unit cells due to the mass flux known as scooping. The model was implemented as a structured Fortran95 code with an upwind difference scheme. The results were compared to experimental data and presented good agreement. The analysis showed that the inclusion of the scooping phenomenon into the model resulted in an averaged 8% improvement in the temperature gradient calculation and heat transfer coefficient prediction for the flowing mixture.

  9. Global Urban Heat Island (UHI) Data Set, 2013

    Data.gov (United States)

    National Aeronautics and Space Administration — The Urban Heat Island (UHI) effect represents the relatively higher temperatures found in urban areas compared to surrounding rural areas owing to higher proportions...

  10. Strong contributions of local background climate to urban heat islands

    Science.gov (United States)

    Zhao, Lei; Lee, Xuhui; Smith, Ronald B.; Oleson, Keith

    2014-07-01

    The urban heat island (UHI), a common phenomenon in which surface temperatures are higher in urban areas than in surrounding rural areas, represents one of the most significant human-induced changes to Earth's surface climate. Even though they are localized hotspots in the landscape, UHIs have a profound impact on the lives of urban residents, who comprise more than half of the world's population. A barrier to UHI mitigation is the lack of quantitative attribution of the various contributions to UHI intensity (expressed as the temperature difference between urban and rural areas, ΔT). A common perception is that reduction in evaporative cooling in urban land is the dominant driver of ΔT (ref. 5). Here we use a climate model to show that, for cities across North America, geographic variations in daytime ΔT are largely explained by variations in the efficiency with which urban and rural areas convect heat to the lower atmosphere. If urban areas are aerodynamically smoother than surrounding rural areas, urban heat dissipation is relatively less efficient and urban warming occurs (and vice versa). This convection effect depends on the local background climate, increasing daytime ΔT by 3.0 +/- 0.3 kelvin (mean and standard error) in humid climates but decreasing ΔT by 1.5 +/- 0.2 kelvin in dry climates. In the humid eastern United States, there is evidence of higher ΔT in drier years. These relationships imply that UHIs will exacerbate heatwave stress on human health in wet climates where high temperature effects are already compounded by high air humidity and in drier years when positive temperature anomalies may be reinforced by a precipitation-temperature feedback. Our results support albedo management as a viable means of reducing ΔT on large scales.

  11. Boiling phenomenon and heat transfer in bead-packed porous structure

    International Nuclear Information System (INIS)

    Zhang Xiaojie; ZHu Yanlei; Bai Bofeng; Yan Xiao; Xiao Zejun

    2009-01-01

    A visual study on pool boiling behavior and phase distribution was conducted on the porous structures made of staggered glass beads at atmospheric pressure. The bead-packed structure was heated on the bottom. The investigations were carried out respectively at different glass bead diameters which were 4 mm, 6 mm and 8 mm. The results show that during subcooled boiling, small isolated bubbles are formed on the heated surface and combine into main-bubbles, the dispersion frequency of the main-bubbles is low and the small bubbles scatter in the bead-packed porous structures. At the initial stage of saturated boiling, the bubble growth rate, the volume of main-bubbles and the range of continuous vapor phase increase. The dispersion frequency of main-bubbles increases with the increasing of heat flux. During film boiling, the heated surface is absolutely covered with vapor film and the porous structure is full of liquid. The larger the diameter of beads is, the higher heat flux is needed for the same phenomenon, and the higher maximum value of heat transfer coefficient will be. During the whole saturated boiling, and the heat transfer enhanced firstly and then weakened. Being opposite to that of the diameters of 4 mm and 8 mm, the heat transfer coefficient in the 6 mm-bead-packed porous structure decreases with the increasing of the heat flux. (authors)

  12. Causes of Potential Urban Heat Island Space Using Heat flux Budget Under Urban Canopy

    Science.gov (United States)

    Kwon, Y. J.; Lee, D. K.

    2017-12-01

    Raised concerns about possible contribution from urban heat island to global warming is about 30 percent. Therefore, mitigating urban heat island became one of major issues to solve among urban planners, urban designers, landscape architects, urban affair decision makers and etc. Urban heat island effect on a micro-scale is influenced by factors such as wind, water vapor and solar radiation. Urban heat island effect on a microscale is influenced by factors like wind, water vapor and solar radiation. These microscopic climates are also altered by factors affecting the heat content in space, like SVF and aspect ratio depending on the structural characteristics of various urban canyon components. Indicators of heat mitigation in urban design stage allows us to create a spatial structure considering the heat balance budget. The spatial characteristics affect thermal change by varying heat storage, emitting or absorbing the heat. The research defines characteristics of the space composed of the factors affecting the heat flux change as the potential urban heat island space. Potential urban heat island spaces are that having higher heat flux than periphery space. The study is to know the spatial characteristics that affects the subsequent temperature rise by the heat flux. As a research method, four types of potential heat island space regions were analyzed. I categorized the spatial types by comparing parameters' value of energy balance in day and night: 1) day severe areas, 2) day comfort areas, 3) night severe areas, 4) night comfort areas. I have looked at these four types of potential urban heat island areas from a microscopic perspective and investigated how various forms of heat influences on higher heat flux areas. This research was designed to investigate the heat indicators to be reflected in the design of urban canyon for heat mitigation. As a result, severe areas in daytime have high SVF rate, sensible heat is generated. Day comfort areas have shadow effect

  13. Using Remote Sensing Data and Research Results for Urban Heat Island Mitigation

    Science.gov (United States)

    Estes, Maury; Luvall, Jeffrey

    1999-01-01

    This paper provides information on the characteristics of the urban heat island, research designed to provide the data needed to develop effective urban heat island reduction strategies, and the development of local working groups to develop implementation plans. As background, an overview of research results on the urban heat island phenomenon and the resultant effect on energy usage and air quality will be explored. The use of more reflective roofing materials, paving materials, tree planting, and other initiatives will be explored as a basis for strategies to mitigate urban heat islands and improve the urban environment. Current efforts to use aircraft remote sensing data in Atlanta, Baton Rouge, Sacramento, and Salt Lake City and our work with non-profit organizations designated to lead public education and strategic development efforts will be presented. Efforts to organize working groups comprised of key stakeholders, the process followed in communicating research results, and methodology for soliciting feedback and incorporating ideas into local plans, policies and decision-making will be discussed. Challenges in developing and transferring data products and research results to stakeholders will be presented. It is our ultimate goal that such efforts be integrated into plans and/or decision models that encourage sustainable development.

  14. Vulnerability to Urban Heat Island in São Paulo Municipality: An Approach to Support the Mitigation Measures Implementation in Urban Planning

    Directory of Open Access Journals (Sweden)

    Juliana Siqueira-Gay

    2017-10-01

    Full Text Available In the practice of urban and environmental planning, especially in the context of adaptation to environmental changes, there is a demand for studies that integrate social, economic and environmental information of the population and related risk. Particularly in large urban centers, waterproofing and verticalization have the potential to increase local air temperature, triggering the phenomenon of heat islands. Therefore, this phenomenon has side effects such as public health problems, pollution and changes in the air circulation. In view of the risks and consequences of the urban heat islands, this paper aims to analyze the priority areas for implementing measures to mitigate the effects of the urban heat islands phenomenon in São Paulo City (Brazil. A vulnerability index was proposed considering the social and environmental dimensions, relating the capacity of adaptation, sensitivity and exposure to the occurrence of the phenomenon of urban heat islands. Besides that, measures to mitigate the effects associated with heat islands in urban planning were identified. The central regions are critical for exposure and the outskirts, for adaptive capacity and sensitivity, both considered priorities for the implementation of mitigation measures. In addition, strategies such as implementation and conservation of green spaces, preservation of water bodies, urban design change, as well as use of materials with high reflectance are also listed and partially foreseen in the Municipal Strategic Master Plan to mitigate the effects of urban heat island.

  15. A Global Characterization of Urban Heat Islands

    Science.gov (United States)

    Chakraborty, T.; Lee, X.

    2017-12-01

    The urban heat island (UHI) effect refers to the higher temperatures in urban areas, and it is one of the most well-known consequences of urbanization on local climate. In the present study, we define a new simplified urban-boundary (SUB) algorithm to quantify the daytime and nighttime surface UHIs on a global scale based on 16 years of MODIS Land Surface Temperature (LST) data. The results from the algorithm are validated against previous studies and used to determine the diurnal, monthly, and long-term variation in the surface UHI for over 9000 urban clusters situated in the different Koppen-Geiger climate zones,namely equatorial, arid, warm temperate, snow, and polar. Thus, the variability of the surface UHI for each climate class is determined using a consistent methodology for the first time. The 16-year mean global daytime surface UHI is 0.71 ± 0.93 °C at 1030 LT and 1.00 ± 1.17 °C at 1330 LT, while the nighttime surface UHI is 0.51 ± 0.50 °C at 2230 LT and 0.42 ± 0.52 °C at 0130 LT. This is in good agreement with the results from previous studies, which have looked at the UHI for multiple cities. Summer surface UHI is larger than winter surface UHI across all climate zones. The annual daytime surface UHI is highest in the polar urban clusters (1.77 ± 1.61 °C), followed by snow (1.39 ± 1.17 °C), equatorial (1.21 ± 1.32 °C), warm temperate (1.02 ± 0.98 °C), and arid (0.18 ± 1.27 °C). Urban clusters in the arid climate are found to show different diurnal and seasonal patterns, with higher nighttime surface UHI (0.65 ± 0.58 °C) and two seasonal peaks during the year. The diurnal variation in surface UHI is highest in the polar zone (1.16 °C) and lowest in the arid zone (0.57 °C). The inter-seasonality is also highest in the polar Zone (2.20 °C) and lowest in the arid zone (0.80 °C). Finally, we investigate the change in the surface UHI in more than a decade (2001 to 2013 for MODIS TERRA and 2003 to 2013 for MODIS AQUA) and find a gradual

  16. The mitigation effect of configuration and context optimization of urban holdings on heat island

    International Nuclear Information System (INIS)

    Liu, Y P; Yu, D Y; Xun, B

    2014-01-01

    The urban heat island (UHI) phenomenon has become a serious problem in recent years. It is necessary to study the mitigation methods and quantify their effects on UHI. In this paper, based on the remote sensed data, an empirical model was established as a negative function of land surface temperature (LST) to vegetation coverage. Urban heat island intensity (UHII) was estimated by a robust statistic algorithm. Compared with the current condition (vegetation coverage equaling to 0%), five high vegetation coverage building scenarios (10%, 20%, 30%, 40%, and 50%) were designed to explore mitigation effects on UHI separately. The results showed that the mean LST increase by about 0.5°C when vegetation coverage decrease by 0.1. UHII has a considerable decrease when the scenarios of vegetation coverage equaling to 20% and 40%, respectively. The reasonable vegetation configuration is the effective UHI mitigation

  17. Modifications of the urban heat island characteristics under exceptionally hot weather - A case study

    Science.gov (United States)

    Founda, Dimitra; Pierros, Fragiskos; Santamouris, Mathew

    2016-04-01

    Considerable recent research suggests that heat waves are becoming more frequent, more intense and longer in the future. Heat waves are characterised by the dominance of prolonged abnormally hot conditions related to synoptic scale anomalies, thus they affect extensive geographical areas. Heat waves (HW) have a profound impact on humans and they have been proven to increase mortality. Urban areas are known to be hotter than the surrounding rural areas due to the well documented urban heat island (UHI) phenomenon. Urban areas face increased risk under heat waves, due to the added heat from the urban heat island and increased population density. Given that urban populations keep increasing, citizens are exposed to significant heat related risk. Mitigation and adaptation strategies require a deep understanding of the response of the urban heat islands under extremely hot conditions. The response of the urban heat island under selected episodes of heat waves is examined in the city of Athens, from the comparison between stations of different characteristics (urban, suburban, coastal and rural). Two distinct episodes of heat waves occurring during summer 2000 were selected. Daily maximum air temperature at the urban station of the National Observatory of Athens (NOA) exceeded 40 0C for at least three consecutive days for both episodes. The intensity of UHI during heat waves was compared to the intensity under 'normal' conditions, represented from a period 'before' and 'after' the heat wave. Striking differences of UHI features between HW and no HW cases were observed, depending on the time of the day and the type of station. The comparison between the urban and the coastal station showed an increase of the order of 3 0C in the intensity of UHI during the HW days, as regards both daytime and nighttime conditions. The comparison between urban and a suburban (inland) station, revealed some different behaviour during HWs, with increases of the order of 3 0C in the nocturnal

  18. Urban and regional heat island adaptation measures in the Netherlands

    Directory of Open Access Journals (Sweden)

    Leyre Echevarria Icaza

    2017-11-01

    Full Text Available The urban planner´s role should be adapted to the current globalised and overspecialised economic and environmental context, envisioning a balance at the regional scale, apprehending not only new technologies, but also new mapping principles, that allow obtaining multidisciplinary integral overviews since the preliminary stages of the design process. The urban heat Island (UHI is one of the main phenomena affecting the urban climate. In the Netherlands, during the heat wave of 2006, more than 1,000 extra deaths were registered. UHI-related parameters are an example of new elements that should be taken into consideration since the early phases of the design process. Problem statement Thus, the development of urban design guidelines to reduce the heat islands in Dutch cities and regions requires first an overall reflection on the heat island phenomenom (relevance of the large scale assessment, existing tools, instruments and proposal of integrative and catalysing mapping strategies and then a specific assessment of the phenomenom at the selected locations in The Netherlands (testing those principles. Main research question Could the use of satellite imagery help analyse the UHI in the Netherlands and contribute to suggest catalysing mitigation acions actions implementable in the existing urban context of the cities, regions and provinces assessed? Method The development of urban design principles that aim at reaching a physical balance at the regional scale is critical to ensure a reduction of the UHI effect. Landsat and Modis satellite imagery can be analysed and processed using ATCOR 2/3, ENVI 4.7 and GIS, allowing not only a neighbourhood, city and regional scale assessment, but also generating holistic catalysing mapping typologies: game-board, rhizome, layering and drift, which are critical to ensure the integration of all parameters. The scientific inputs need to be combined not only with other disciplines but often also with existing urban

  19. In vitro investigation of heat transfer phenomenon in human immature teeth.

    Science.gov (United States)

    Talebi, Maryam; Moghimi, Sahar; Shafagh, Mina; Kalani, Hadi; Mazhari, Fatemeh

    2014-01-01

    Background and aims. Heat generated within tooth during clinical dentistry can cause thermally induced damage to hard and soft components of the tooth (enamel, dentin and pulp). Geometrical characteristics of immature teeth are different from those of mature teeth. The purpose of this experimental and theoretical study was to investigate thermal changes in immature permanent teeth during the use of LED light-curing units (LCU). Materials and methods. This study was performed on the second mandibular premolars. This experimental investiga-tion was carried out for recording temperature variations of different sites of tooth and two dimensional finite element models were used for heat transfer phenomenon in immature teeth. Sensitivity analysis and local tests were included in the model validation phase. Results. Overall, thermal stimulation for 30 seconds with a low-intensity LED LCU increased the temperature from 28°C to 38°C in IIT (intact immature tooth) and PIT (cavity-prepared immature tooth). When a high-intensity LED LCU was used, tooth temperature increased from 28°C to 48°C. The results of the experimental tests and mathematical modeling illustrated that using LED LCU on immature teeth did not have any detrimental effect on the pulp temperature. Conclusion. Using LED LCU in immature teeth had no effect on pulp temperature in this study. Sensitivity analysis showed that variations of heat conductivity might affect heat transfer in immature teeth; therefore, further studies are required to determine thermal conductivity of immature teeth.

  20. Sensitivities Affecting Heat and Urban Heat Island Effect on Local Scale Projected to Neighborhood Scale in Baltimore, Maryland

    Science.gov (United States)

    Sze, C.; Zaitchik, B. F.; Scott, A.

    2015-12-01

    Urban regions are often impacted more by heat than adjacent rural areas, which is a phenomenon known as the urban heat island (UHI) effect. Urban areas are also highly heterogeneous and notoriously difficult to monitor using standard meteorological protocols—the hottest microclimates within a city often occur in locations that lack open, representative installation sites that are an adequate distance from buildings and direct heat sources. To investigate the challenges of monitoring urban heat, this study examines the sensitivity of temperature and humidity sensors currently used in a Baltimore UHI monitoring network to differences in sun exposure, material on which the data collecting instrument is attached, and land cover class of the vicinity. Sensitivity to sun exposure and attachment site can be interpreted as sources of uncertainty for urban heat monitoring, while sensitivity to land cover may reflect a true source of local temperature and humidity variability. In this study, we present results from a test deployment designed to assess the sensitivity of heat measurements to each of these three factors. We then apply these results to interpret measurements taken across the entire Baltimore UHI monitoring network. These results can then be used to improve heat measurements and more accurately represent and quantify the UHI effect on a broader scale, such as in neighborhoods or urban centers.

  1. Fourier heat conduction as a phenomenon described within the scope of the second law

    Energy Technology Data Exchange (ETDEWEB)

    Jesudason, Christopher G. [Chemistry Department and Center for Theoretical and Computational Physics, University of Malaya, 50603 Kuala Lumpur (Malaysia)

    2014-12-10

    The historical development of the Carnot cycle necessitated the construction of isothermal and adiabatic pathways within the cycle that were also mechanically 'reversible' which lead eventually to the Kelvin-Clausius development of the entropy function S where for any reversible closed path C, ∮{sub C} dS = 0 based on an infinite number of concatenated Carnot engines that approximated the said path and where for each engine ΔQ{sub 1}/T{sub 1}+ΔQ{sub 2}/T{sub 2} = 0 where the Q's and T's are the heat absorption increments and temperature respectively with the subscripts indicating the isothermal paths (1;2) where for the Carnot engine, the heat absorption is for the diathermal (isothermal) paths of the cycle only. Since 'heat' has been defined as that form of energy that is transferred as a result of a temperature difference and a corollary of the Clausius statement of the Second law is that it is impossible for heat to be transferred from a cold to a hot reservoir with no other effect on the environment, these statements suggested that the local mode of transfer of 'heat' in the isothermal segments of the pathway does imply a Fourier heat conduction mechanism (to conform to the definition of 'heat') albeit of a 'reversible' kind, but on the other hand, the Fourier mechanism is apparently irreversible, leading to an increase in entropy of the combined reservoirs at either end of the material involved in the conveyance of the heat energy. These and several other considerations lead Benofy and Quay (BQ) to postulate the Fourier heat conduction phenomenon to be an ancillary principle in thermodynamics, with this principle being strictly local in nature, where the global Second law statements could not be applied to this local process. Here we present equations that model heat conduction as a thermodynamically reversible but mechanically irreversible process where due to the belief in mechanical time

  2. In Vitro Investigation of Heat Transfer Phenomenon in Human Immature Teeth

    Directory of Open Access Journals (Sweden)

    Maryam Talebi

    2014-12-01

    Full Text Available Background and aims. Heat generated within tooth during clinical dentistry can cause thermally induced damage to hard and soft components of the tooth (enamel, dentin and pulp. Geometrical characteristics of immature teeth are different from those of mature teeth. The purpose of this experimental and theoretical study was to investigate thermal changes in immature permanent teeth during the use of LED light-curing units (LCU. Materials and methods. This study was performed on the second mandibular premolars. This experimental investiga-tion was carried out for recording temperature variations of different sites of tooth and two dimensional finite element mod-els were used for heat transfer phenomenon in immature teeth. Sensitivity analysis and local tests were included in the mod-el validation phase. Results. Overall, thermal stimulation for 30 seconds with a low-intensity LED LCU increased the temperature from 28°C to 38°C in IIT (intact immature tooth and PIT (cavity-prepared immature tooth. When a high-intensity LED LCU was used, tooth temperature increased from 28°C to 48°C. The results of the experimental tests and mathematical modeling il-lustrated that using LED LCU on immature teeth did not have any detrimental effect on the pulp temperature. Conclusion. Using LED LCU in immature teeth had no effect on pulp temperature in this study. Sensitivity analysis showed that variations of heat conductivity might affect heat transfer in immature teeth; therefore, further studies are re-quired to determine thermal conductivity of immature teeth.

  3. Reduced Urban Heat Island intensity under warmer conditions

    Science.gov (United States)

    Scott, Anna A.; Waugh, Darryn W.; Zaitchik, Ben F.

    2018-06-01

    The Urban Heat Island (UHI), the tendency for urban areas to be hotter than rural regions, represents a significant health concern in summer as urban populations are exposed to elevated temperatures. A number of studies suggest that the UHI increases during warmer conditions, however there has been no investigation of this for a large ensemble of cities. Here we compare urban and rural temperatures in 54 US cities for 2000–2015 and show that the intensity of the Urban Heat Island, measured here as the differences in daily-minimum or daily-maximum temperatures between urban and rural stations or ΔT, in fact tends to decrease with increasing temperature in most cities (38/54). This holds when investigating daily variability, heat extremes, and variability across climate zones and is primarily driven by changes in rural areas. We relate this change to large-scale or synoptic weather conditions, and find that the lowest ΔT nights occur during moist weather conditions. We also find that warming cities have not experienced an increasing Urban Heat Island effect.

  4. Air pollution prevention through urban heat island mitigation: An update on the urban heat island pilot project

    Energy Technology Data Exchange (ETDEWEB)

    Gorsevski, V.; Taha, H.; Quattrochi, D.; Luvall, J.

    1998-07-01

    Urban heat islands increase the demand for cooling energy and accelerate the formation of smog. They are created when natural vegetation is replaced by heat-absorbing surfaces such as building roofs and walls, parking lots, and streets. Through the implementation of measures designed to mitigate the urban heat island, communities can decrease their demand for energy and effectively cool the metropolitan landscape. In addition to the economic benefits, using less energy leads to reductions in emission of CO{sub 2}--a greenhouse gas--as well as ozone (smog) precursors such as NOx and VOCs. Because ozone is created when NOx and VOCs photochemically combine with heat and solar radiation, actions taken to lower ambient air temperature can significantly reduce ozone concentrations in certain areas. Measures to reverse the urban heat island include afforestation and the widespread use of highly reflective surfaces. To demonstrate the potential benefits of implementing these measures, EPA has teamed up with NASA and LBNL to initiate a pilot project with three US cities. As part of the pilot, NASA will use remotely-sensed data to quantify surface temperature, albedo, the thermal response number and NDVI vegetation of each city. This information will be used by scientists at Lawrence Berkeley National Laboratory (LBNL) along with other data as inputs to model various scenarios that will help quantify the potential benefits of urban heat island mitigation measures in terms of reduced energy use and pollution. This paper will briefly describe this pilot project and provide an update on the progress to date.

  5. Best estimate approach for the evaluation of critical heat flux phenomenon in the boiling water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Kaliatka, Tadas; Kaliatka, Algirdas; Uspuras, Eudenijus; Vaisnoras, Mindaugas [Lithuanian Energy Institute, Kaunas (Lithuania); Mochizuki, Hiroyasu; Rooijen, W.F.G. van [Fukui Univ. (Japan). Research Inst. of Nuclear Engineering

    2017-05-15

    Because of the uncertainties associated with the definition of Critical Heat Flux (CHF), the best estimate approach should be used. In this paper the application of best-estimate approach for the analysis of CHF phenomenon in the boiling water reactors is presented. At first, the nodalization of RBMK-1500, BWR-5 and ABWR fuel assemblies were developed using RELAP5 code. Using developed models the CHF and Critical Heat Flux Ratio (CHFR) for different types of reactors were evaluated. The calculation results of CHF were compared with the well-known experimental data for light water reactors. The uncertainty and sensitivity analysis of ABWR 8 x 8 fuel assembly CHFR calculation result was performed using the GRS (Germany) methodology with the SUSA tool. Finally, the values of Minimum Critical Power Ratio (MCPR) were calculated for RBMK-1500, BWR-5 and ABWR fuel assemblies. The paper demonstrate how, using the results of sensitivity analysis, to receive the MCPR values, which covers all uncertainties and remains best estimated.

  6. Monitoring Urban Heat Island Through Google Earth Engine: Potentialities and Difficulties in Different Cities of the United States

    Science.gov (United States)

    Ravanelli, R.; Nascetti, A.; Cirigliano, R. V.; Di Rico, C.; Monti, P.; Crespi, M.

    2018-04-01

    The aim of this work is to exploit the large-scale analysis capabilities of the innovative Google Earth Engine platform in order to investigate the temporal variations of the Urban Heat Island phenomenon as a whole. A intuitive methodology implementing a largescale correlation analysis between the Land Surface Temperature and Land Cover alterations was thus developed.The results obtained for the Phoenix MA are promising and show how the urbanization heavily affects the magnitude of the UHI effects with significant increases in LST. The proposed methodology is therefore able to efficiently monitor the UHI phenomenon.

  7. The footprint of urban heat island effect in China

    Science.gov (United States)

    Decheng Zhou; Shuqing Zhao; Liangxia Zhang; Ge Sun; Yongqiang Liu

    2015-01-01

    Urban heat island (UHI) is one major anthropogenic modification to the Earth system that transcends its physical boundary. Using MODIS data from 2003 to 2012, we showed that the UHI effect decayed exponentially toward rural areas for majority of the 32 Chinese cities. We found an obvious urban/ rural temperature “cliff”, and estimated that the footprint of UHI effect (...

  8. Surface urban heat island across 419 global big cities.

    Science.gov (United States)

    Peng, Shushi; Piao, Shilong; Ciais, Philippe; Friedlingstein, Pierre; Ottle, Catherine; Bréon, François-Marie; Nan, Huijuan; Zhou, Liming; Myneni, Ranga B

    2012-01-17

    Urban heat island is among the most evident aspects of human impacts on the earth system. Here we assess the diurnal and seasonal variation of surface urban heat island intensity (SUHII) defined as the surface temperature difference between urban area and suburban area measured from the MODIS. Differences in SUHII are analyzed across 419 global big cities, and we assess several potential biophysical and socio-economic driving factors. Across the big cities, we show that the average annual daytime SUHII (1.5 ± 1.2 °C) is higher than the annual nighttime SUHII (1.1 ± 0.5 °C) (P < 0.001). But no correlation is found between daytime and nighttime SUHII across big cities (P = 0.84), suggesting different driving mechanisms between day and night. The distribution of nighttime SUHII correlates positively with the difference in albedo and nighttime light between urban area and suburban area, while the distribution of daytime SUHII correlates negatively across cities with the difference of vegetation cover and activity between urban and suburban areas. Our results emphasize the key role of vegetation feedbacks in attenuating SUHII of big cities during the day, in particular during the growing season, further highlighting that increasing urban vegetation cover could be one effective way to mitigate the urban heat island effect.

  9. Intensity of Urban Heat Islands in Tropical and Temperate Climates

    Directory of Open Access Journals (Sweden)

    Margarete Cristiane de Costa Trindade Amorim

    2017-12-01

    Full Text Available Nowadays, most of the Earth’s population lives in urban areas. The replacement of vegetation by buildings and the general soil sealing, associated with human activity, lead to a rise in cities temperature, resulting in the formation of urban heat islands. This article aims to evaluate the intensity and the hourly maintenance of the atmospheric heat islands in two climates: one tropical (Presidente Prudente, Brazil and one temperate (Rennes, France throughout 2016. For this, air temperature and hourly averages were measured and calculated using both a HOBO datalogger (U23-002—protected under the same RS3 brand and weather stations Davis Vantage PRO 2. The daily evolution of the heat islands presented characteristics that varied according to the hours and seasons of the year. For both Rennes and Presidente Prudente, the largest magnitudes occurred overnight, being more greatly expressed in the tropical environment and during the driest months (winter in the tropical city and summer in the temperate one. The variability of synoptic conditions from one month to another also leads to a great heterogeneity of UHI intensity throughout the year.

  10. Urban heat islands in the subsurface of German cities

    Science.gov (United States)

    Menberg, K.; Blum, P.; Zhu, K.; Bayer, P.

    2012-04-01

    In the subsurface of many cities there are widespread and persistent thermal anomalies (subsurface urban heat islands) that result in a warming of urban aquifers. The reasons for this heating are manifold. Possible heat sources are basements of buildings, leakage of sewage systems, buried district heating networks, re-injection of cooling water and solar irradiation on paved surfaces. In the current study, the reported groundwater temperatures in several German cities, such as Berlin, Munich, Cologne and Karlsruhe, are compared. Available data sets are supplemented by temperature measurements and depth profiles in observation wells. Trend analyses are conducted with time series of groundwater temperatures, and three-dimensional groundwater temperature maps are provided. In all investigated cities, pronounced positive temperature anomalies are present. The distribution of groundwater temperatures appears to be spatially and temporally highly variable. Apparently, the increased heat input into the urban subsurface is controlled by very local and site-specific parameters. In the long-run, the superposition of various heat sources results in an extensive temperature increase. In many cases, the maximum temperature elevation is found close to the city centre. Regional groundwater temperature differences between the city centre and the rural background are up to 5 °C, with local hot spots of even more pronounced anomalies. Particular heat sources, like cooling water injections or case-specific underground constructions, can cause local temperatures > 20°C in the subsurface. Examination of the long-term variations in isotherm maps shows that temperatures have increased by about 1°C in the city, as well as in the rural background areas over the last decades. This increase could be reproduced with trend analysis of temperature data gathered from several groundwater wells. Comparison between groundwater and air temperatures in Karlsruhe, for example, also indicates a

  11. The urban heat island and its impact on heat waves and human health in Shanghai.

    Science.gov (United States)

    Tan, Jianguo; Zheng, Youfei; Tang, Xu; Guo, Changyi; Li, Liping; Song, Guixiang; Zhen, Xinrong; Yuan, Dong; Kalkstein, Adam J; Li, Furong

    2010-01-01

    With global warming forecast to continue into the foreseeable future, heat waves are very likely to increase in both frequency and intensity. In urban regions, these future heat waves will be exacerbated by the urban heat island effect, and will have the potential to negatively influence the health and welfare of urban residents. In order to investigate the health effects of the urban heat island (UHI) in Shanghai, China, 30 years of meteorological records (1975-2004) were examined for 11 first- and second-order weather stations in and around Shanghai. Additionally, automatic weather observation data recorded in recent years as well as daily all-cause summer mortality counts in 11 urban, suburban, and exurban regions (1998-2004) in Shanghai have been used. The results show that different sites (city center or surroundings) have experienced different degrees of warming as a result of increasing urbanization. In turn, this has resulted in a more extensive urban heat island effect, causing additional hot days and heat waves in urban regions compared to rural locales. An examination of summer mortality rates in and around Shanghai yields heightened heat-related mortality in urban regions, and we conclude that the UHI is directly responsible, acting to worsen the adverse health effects from exposure to extreme thermal conditions.

  12. Urban heat island and bioclimatological conditions in a hot-humid tropical city: the example of Akure, Nigeria

    Directory of Open Access Journals (Sweden)

    Balogun, Ifeoluwa A.

    2014-09-01

    Full Text Available The impact of weather on human health has become an issue of increased significance in recent times, considering the increasing rate of urbanisation and the much associated heat island phenomenon. This study examines the urbanisation influence on human bioclimatic conditions in Akure, a medium sized hot-humid tropical city in Nigeria, utilising data from measurements at urban and rural sites in the city. Differences in the diurnal, monthly and seasonal variation of human bioclimatic characteristics between both environments were evaluated and tested for statistical significance. Higher frequencies of high temperatures observed in the city centre suggest a significant heat stress and health risk in this hot-humid city.

  13. Observing the Vertical Dimensions of Singapore's Urban Heat Island

    Science.gov (United States)

    Chow, W. T. L.; Ho, D. X. Q.

    2015-12-01

    In numerous cities, measurements of urban warmth in most urban heat island (UHI) studies are generally constrained towards surface or near-surface (quadcopter platforms to measure urban temperature and humidity profiles in Singapore, which is a rapidly urbanizing major tropical metropolis. These profiles were measured from the surface to ~100 m above ground level, a height which includes all of the urban canopy and parts of the urban boundary layer. Initial results indicate significant variations in stability measured over different land uses (e.g. urban park, high-rise residential, commercial); these profiles are also temporally dynamic, depending on the time of day and larger-scale weather conditions.

  14. Impacts of urban growth and heat waves events on the urban heat island in Bucharest city

    Science.gov (United States)

    Zoran, Maria A.; Savastru, Roxana S.; Savastru, Dan M.; Dida, Adrian I.

    2016-10-01

    This study investigated the influences of urban growth and heat waves events on Urban Heat Island in relationship with several biophysical variables in Bucharest metropolitan area of Romania through satellite and in-situ monitoring data. Remote sensing data from Landsat TM/ETM+ and time series MODIS Terra/Aqua sensors have been used to assess urban land cover- temperature interactions over period between 2000 and 2016 years. Vegetation abundances and percent impervious surfaces were derived by means of linear spectral mixture model, and a method for effectively enhancing impervious surface has been developed to accurately examine the urban growth. The land surface temperature (Ts), a key parameter for urban thermal characteristics analysis, was also analyzed in relation with the Normalized Difference Vegetation Index (NDVI) at city level. Based on these parameters, the urban growth, urban heat island effect (UHI) and the relationships of Ts to other biophysical parameters (surface albedo, precipitations, wind intensity and direction) have been analyzed. Results show that in the metropolitan area ratio of impervious surface in Bucharest increased significantly during investigated period, the intensity of urban heat island and heat wave events being most significant. The correlation analyses revealed that, at the pixel-scale, Ts possessed a strong positive correlation with percent impervious surfaces and negative correlation with vegetation abundances at the regional scale, respectively. This analysis provided an integrated research scheme and the findings can be very useful for urban ecosystem modeling.

  15. On the urban heat island effect dependence on temperature trends

    International Nuclear Information System (INIS)

    Camilloni, I.; Barros, V.

    1997-01-01

    For US, Argentine and Australian cities, yearly mean urban to rural temperature differences (ΔT u-r ) and rural temperatures (T r ) are negatively correlated in almost every case, suggesting that urban heat island intensity depends, among other parameters on the temperature itself. This negative correlation is related to the fact that interannual variability of temperature is generally lower in urban environments than in rural areas. This seems to hold true at low frequencies leading to opposite trends in the two variables. Hence, urban stations are prone to have lower trends in absolute value than rural ones. Therefore, regional data sets including records from urban locations, in addition to urban growth bias may have a second type of urban bias associated with temperature trends. A bulk estimate of this second urban bias trend for the contiguous United States during 1901-1984 indicates that it could be of the same order as the urban growth bias and of opposite sign. If these results could be extended to global data, it could be expected that the spurious influence of urban growth on global temperature trends during warming periods will be offset by the diminishing of the urban heat island intensity. 36 refs., 7 figs., 2 tabs

  16. Daytime urban heat islands from Landsat ETM+ and Corine land cover data: An application to major cities in Greece

    Energy Technology Data Exchange (ETDEWEB)

    Stathopoulou, Marina; Cartalis, Constantinos [Remote Sensing and Image Processing Laboratory, Division of Applied Physics, Department of Physics, Building PHYS-5, University Campus, 157 84 Athens (Greece)

    2007-03-15

    Satellite images in the thermal infrared can be used for assessing the thermal urban environment as well as for defining heat islands in urban areas. In this study, the thermal environment of major cities in Greece (Athens, Thessaloniki, Patra, Volos and Heraklion) is examined using satellite images provided by the Landsat Enhanced Thematic Mapper (ETM+) sensor on board Landsat 7 satellite corresponding to the daytime and warm period when the surface urban heat island (SUHI) phenomenon is best observed. The spatial structure of the thermal urban environment is analyzed in each case study and the ''hottest'' surfaces within the urban settings are identified and related to the urban surface characteristics and land use. For the needs of the study, the Corine land cover (CLC) database for Greece is also used, in an effort to define more effectively the link between surface emissivities, land surface temperatures and urban surface characteristics. (author)

  17. Characterization of Urban Heat and Exacerbation: Development of a Heat Island Index for California

    Directory of Open Access Journals (Sweden)

    Haider Taha

    2017-08-01

    Full Text Available To further evaluate the factors influencing public heat and air-quality health, a characterization of how urban areas affect the thermal environment, particularly in terms of the air temperature, is necessary. To assist public health agencies in ranking urban areas in terms of heat stress and developing mitigation plans or allocating various resources, this study characterized urban heat in California and quantified an urban heat island index (UHII at the census-tract level (~1 km2. Multi-scale atmospheric modeling was carried out and a practical UHII definition was developed. The UHII was diagnosed with different metrics and its spatial patterns were characterized for small, large, urban-climate archipelago, inland, and coastal areas. It was found that within each region, wide ranges of urban heat and UHII exist. At the lower end of the scale (in smaller urban areas, the UHII reaches up to 20 degree-hours per day (DH/day; °C.hr/day, whereas at the higher end (in larger areas, it reaches up to 125 DH/day or greater. The average largest temperature difference (urban heat island within each region ranges from 0.5–1.0 °C in smaller areas to up to 5 °C or more at the higher end, such as in urban-climate archipelagos. Furthermore, urban heat is exacerbated during warmer weather and that, in turn, can worsen the health impacts of heat events presently and in the future, for which it is expected that both the frequency and duration of heat waves will increase.

  18. Impact of tidal phenomenon “Met Ef” on the exploitation of benthos at inshore shoals in Kei islands, Indonesia

    Science.gov (United States)

    Renjaan, Eugenius Alfred; Makailipessy, Marvin Mario

    2017-10-01

    A study on benthos exploitation at five shoals located in Rosenberg and Nerong Straits, the kei islands had been conducted during period of the lowest ebb tide phenomenon which locally termed Met Ef on 2016. The purpose of the study is to know the impact of the Met Ef on benthos exploitation at the shoals by local communities during the Met Ef. Data of tidal amplitudes were obtained from the Tide Charts Mobile Applications which confirmed the observations on tide pole during October, November, and December 2013 until 2016. Data of benthos exploited during periods of Met Ef at the shoals was obtained through direct observation on benthos exploited by the local communities, also by interviewing them using questionnaires. The results showed that the lowest ebb tide of the Met Ef occurred in November, i.e., at 2 to 5 days after the full moon and/or new moon, with an average tidal range of 2.66 m and even have ever one reached 2.80 m. The most exploited benthos at the shoals is Giant clam (Tridacna sp.), Spider conch (Lambis sp.), Hammer oyster (Malleus sp.), Octopus (Octopus spp.). The intensity of benthos exploited at the shoals increased during the period of Met Ef especially in October because at that time the sea was very calm and clear due to relatively lower wind speed and the rain fall was relatively lower. This has promoted an easier accessibility of the communities to exploit benthos at shoals and, therefore October is considered by the local communities as the peak of Met Ef, instead of November. During November and, December the availability of benthos in shoals has been reduced due to it has been exploited intensely in October.

  19. Impact of the urban heat island on residents’ energy consumption: a case study of Qingdao

    Science.gov (United States)

    Ding, Feng; Pang, Huaji; Guo, Wenhui

    2018-02-01

    This paper examines impact of urban heat island on residents’ energy consumption through comparative analyses of monthly air temperature data observed in Qingdao, Laoshan and Huangdao weather stations. The results show effect of urban heat island is close related with urbanization speed. Recently, effects of urban heat island of Laoshan and Huangdao exceed that of Qingdao, consistent with rapid urbanization in Laoshan and Huangdao. Enhanced effect of urban heat island induces surface air temperature to rise up, further increase electricity energy consumption for air conditioning use in summer and reduce coal consumption for residents heating in winter. Comparing change of residents’ energy consumption in summer and winter, increments in summer are less than reduction in winter. This implicates effect of urban heat island is more obvious in winter than in summer.

  20. The Impact of the Urban Heat Island during an Intense Heat Wave in Oklahoma City

    Directory of Open Access Journals (Sweden)

    Jeffrey B. Basara

    2010-01-01

    Full Text Available During late July and early August 2008, an intense heat wave occurred in Oklahoma City. To quantify the impact of the urban heat island (UHI in Oklahoma City on observed and apparent temperature conditions during the heat wave event, this study used observations from 46 locations in and around Oklahoma City. The methodology utilized composite values of atmospheric conditions for three primary categories defined by population and general land use: rural, suburban, and urban. The results of the analyses demonstrated that a consistent UHI existed during the study period whereby the composite temperature values within the urban core were approximately 0.5∘C warmer during the day than the rural areas and over 2∘C warmer at night. Further, when the warmer temperatures were combined with ambient humidity conditions, the composite values consistently revealed even warmer heat-related variables within the urban environment as compared with the rural zone.

  1. Assessing Heat Health Risk for Sustainability in Beijing’s Urban Heat Island

    Directory of Open Access Journals (Sweden)

    Weihua Dong

    2014-10-01

    Full Text Available This research is motivated by the increasing threat of urban heat waves that are likely worsened by pervasive global warming and urbanization. Different regions of the city including urban, borderland and rural area will experience different levels of heat health risk. In this paper, we propose an improved approach to quantitatively assess Beijing’s heat health risk based on three factors from hazard, vulnerability and especially environment which is considered as an independent factor because different land use/cover types have different influence on ambient air temperatures under the Urban Heat Island effect. The results show that the heat health risk of Beijing demonstrates a spatial-temporal pattern with higher risk in the urban area, lower risk in the borderland between urban and rural area, and lowest risk in the rural area, and the total risk fluctuated dramatically during 2008–2011. To be more specific, the heat health risk was clearly higher in 2009 and 2010 than in 2008 and 2011. Further analysis with the urban area at sub-district level signifies that the impervious surface (urban area such as buildings, roads, et al. ratio is of high correlation with the heat health risk. The validation results show that the proposed method improved the accuracy of heat health risk assessment. We recommend that policy makers should develop efficient urban planning to accomplish Beijing’s sustainable development.

  2. Performances of air source heat pump system for a kind of mal-defrost phenomenon appearing in moderate climate conditions

    International Nuclear Information System (INIS)

    Wang, W.; Feng, Y.C.; Zhu, J.H.; Li, L.T.; Guo, Q.C.; Lu, W.P.

    2013-01-01

    Highlights: ► Mal-defrost performances of ASHP in moderate environment are investigated. ► The system COP decreases to 2.3 under environment temperature of 7.9 °C. ► The decrease of the ASHP heating capacity can get to 43.4%. ► The origins of this special mal-defrost phenomenon were discussed. ► Suggestions were proposed to modify the current defrosting control strategies. - Abstract: To quantify the performance drop of the air source heat pump (ASHP) system under a special kind of mal-defrost phenomenon appearing in moderate climate conditions, a field test was conducted for 8 days at the initial stage of a heating season in Beijing, China. The mal-defrost was found with the more than 60% frosted area of the outdoor heat exchanger after the system running 5 days. During this frosting period, the system COP was significantly degraded, only 2.3 under an environment temperature of 7.9 °C. Comparing the test data before and after frosting, it was found that the mal-defrost decreased the COP up to 40.4% and the heating capacity to 43.4%. Such low energy efficiency continued quite a long time until the defrost control was started up manually by the authors. After defrosting, the COP reclaimed to the normal level of 5.0. The origins of this special mal-defrost phenomenon were discussed. And some suggestions were proposed to modify the current defrosting control strategy, which were helpful to avoid the mal-defrost problem in the current ASHP system and therefore improve the system performances

  3. Heat islands over Mumbai as revealed by autorecorded thermograph data

    Science.gov (United States)

    Srivastava, A. K.; Voogt, James; Kshirsagar, S. R.; Srivastava, Kavita

    2016-02-01

    This study examined hourly temperature data of two locations of Mumbai metropolitan city. One data point (Coloba, Mumbai) is in centre of the city and the other one (Santacruz, Mumbai) is at the airport. The study finds that there were many occasions when night-time hourly temperatures over the city centre were considerably higher than that of the airport, even though temperature at the time of sunset at both the places was nearly same. In this study, the occasions, when hourly night-time temperature over city was more than that of the airport by objectively defined threshold value (3.0 ∘C in this study) for most of the hours in the night, were termed as heat island events. Analysis of the study reveals that these events are mostly confined to November-February months. The study also found that frequency of such events has doubled in recent two decades in comparison to the earlier two decades.

  4. Detection of urban heat island in Ankara, Turkey

    International Nuclear Information System (INIS)

    Cicek, I.; Dogan, U.

    2006-01-01

    Ankara is the second largest city in Turkey after Istanbul, and the rate of population increase and urbanization are quite high. In this study, the effects of urbanization on temperature variation due to urbanization in Ankara were investigated. The intensities of urban heat island (UHI) for long and short term were analyzed. Analysis of both long- and short-term data revealed that there is a significant increase in the intensity of UHI (AT(u-r)) in winter during the period analyzed. Analysis of data collected for period of October 2001-September 2002 shows that intensity of maximum UHI is in February. In this month, positive UHI was observed in 26 nights and on all these days wind speed was less than 0.5ms.1. UHI is positive in all seasons and frequency and intensity of UHI in winter are higher than in the other seasons. This characteristic makes Ankara different from other temperate latitude cities

  5. Positive effects of vegetation: Urban heat island and green roofs

    International Nuclear Information System (INIS)

    Susca, T.; Gaffin, S.R.; Dell'Osso, G.R.

    2011-01-01

    This paper attempts to evaluate the positive effects of vegetation with a multi-scale approach: an urban and a building scale. Monitoring the urban heat island in four areas of New York City, we have found an average of 2 deg. C difference of temperatures between the most and the least vegetated areas, ascribable to the substitution of vegetation with man-made building materials. At micro-scale, we have assessed the effect of surface albedo on climate through the use of a climatological model. Then, using the CO 2 equivalents as indicators of the impact on climate, we have compared the surface albedo, and the construction, replacement and use phase of a black, a white and a green roof. By our analyses, we found that both the white and the green roofs are less impactive than the black one; with the thermal resistance, the biological activity of plants and the surface albedo playing a crucial role. - Highlights: → The local morphology and the scarcity of vegetation in NYC core determines its UHI. → We introduce the evaluation of the effects of the surface albedo on climate change. → We use it to compare a black roof with a white and a green one. → Surface albedo has a crucial role in the evaluation of the environmental loads of the roofs. → Vegetation has positive effects on both the urban and the building scale. - Vegetation has positive effects both on an urban scale, mitigating the urban heat island effect; and on a building scale, where albedo, thermal insulation and biological activity of plants play a crucial role.

  6. Mitigating the Urban Heat Island Effect in Megacity Tehran

    Directory of Open Access Journals (Sweden)

    Sahar Sodoudi

    2014-01-01

    Full Text Available Cities demonstrate higher nocturnal temperatures than surrounding rural areas, which is called “urban heat island” (UHI effect. Climate change projections also indicate increase in the frequency and intensity of heat waves, which will intensify the UHI effect. As megacity Tehran is affected by severe heatwaves in summer, this study investigates its UHI characteristics and suggests some feasible mitigation strategies in order to reduce the air temperature and save energy. Temperature monitoring in Tehran shows clear evidence of the occurrence of the UHI effect, with a peak in July, where the urban area is circa 6 K warmer than the surrounding areas. The mobile measurements show a park cool island of 6-7 K in 2 central parks, which is also confirmed by satellite images. The effectiveness of three UHI mitigation strategies high albedo material (HAM, greenery on the surface and on the roofs (VEG, and a combination of them (HYBRID has been studied using simulation with the microscale model ENVI-met. All three strategies show higher cooling effect in the daytime. The average nocturnal cooling effect of VEG and HYBRID (0.92, 1.10 K is much higher than HAM (0.16 K, although high-density trees show a negative effect on nocturnal cooling.

  7. Urban heat island and linkage with air quality

    International Nuclear Information System (INIS)

    Greuillet, C.; Galsomies, L.

    2013-01-01

    The urban heat island (UHI) effect can be noticed in cities where the temperature is higher than the surrounding countryside, on average 2 deg. C above. In summer during a heat wave, the gap can up to over ten-degree. UHI causes a thermal stress which induces some repercussions on health. The formation of UHI is more and more documented but further studies have to be conducted in order to qualify and quantify the impacts on our health and environment, and the link with atmospheric pollution. Studies have shown air quality deterioration in UHI areas: Both phenomena can be simultaneous because their conditions of appearance are often linked. Henceforth the stake is to manage and if possible reduce UHI to adapt cities to the expected climate change. Dense cities in the future will also have to be naturally cooled down. In order to do so, we will have to act on the most influential UHI formation factors, namely: vegetation and water, buildings (shapes and materials), production and consumption of energy. (authors)

  8. Critical heat flux (CHF) phenomenon on a downward facing curved surface

    Energy Technology Data Exchange (ETDEWEB)

    Cheung, F.B.; Haddad, K.H.; Liu, Y.C. [Pennsylvania State Univ., University Park, PA (United States). Dept. of Mechanical Engineering

    1997-06-01

    This report describes a theoretical and experimental study of the boundary layer boiling and critical heat flux phenomena on a downward facing curved heating surface, including both hemispherical and toroidal surfaces. A subscale boundary layer boiling (SBLB) test facility was developed to measure the spatial variation of the critical heat flux and observe the underlying mechanisms. Transient quenching and steady-state boiling experiments were performed in the SBLB facility under both saturated and subcooled conditions to obtain a complete database on the critical heat flux. To complement the experimental effort, an advanced hydrodynamic CHF model was developed from the conservation laws along with sound physical arguments. The model provides a clear physical explanation for the spatial variation of the CHF observed in the SBLB experiments and for the weak dependence of the CHF data on the physical size of the vessel. Based upon the CHF model, a scaling law was established for estimating the local critical heat flux on the outer surface of a heated hemispherical vessel that is fully submerged in water. The scaling law, which compares favorably with all the available local CHF data obtained for various vessel sizes, can be used to predict the local CHF limits on large commercial-size vessels. This technical information represents one of the essential elements that is needed in assessing the efficacy of external cooling of core melt by cavity flooding as a severe accident management strategy. 83 figs., 3 tabs.

  9. Critical heat flux (CHF) phenomenon on a downward facing curved surface

    International Nuclear Information System (INIS)

    Cheung, F.B.; Haddad, K.H.; Liu, Y.C.

    1997-06-01

    This report describes a theoretical and experimental study of the boundary layer boiling and critical heat flux phenomena on a downward facing curved heating surface, including both hemispherical and toroidal surfaces. A subscale boundary layer boiling (SBLB) test facility was developed to measure the spatial variation of the critical heat flux and observe the underlying mechanisms. Transient quenching and steady-state boiling experiments were performed in the SBLB facility under both saturated and subcooled conditions to obtain a complete database on the critical heat flux. To complement the experimental effort, an advanced hydrodynamic CHF model was developed from the conservation laws along with sound physical arguments. The model provides a clear physical explanation for the spatial variation of the CHF observed in the SBLB experiments and for the weak dependence of the CHF data on the physical size of the vessel. Based upon the CHF model, a scaling law was established for estimating the local critical heat flux on the outer surface of a heated hemispherical vessel that is fully submerged in water. The scaling law, which compares favorably with all the available local CHF data obtained for various vessel sizes, can be used to predict the local CHF limits on large commercial-size vessels. This technical information represents one of the essential elements that is needed in assessing the efficacy of external cooling of core melt by cavity flooding as a severe accident management strategy. 83 figs., 3 tabs

  10. Coupling Analysis of Heat Island Effects, Vegetation Coverage and Urban Flood in Wuhan

    Science.gov (United States)

    Liu, Y.; Liu, Q.; Fan, W.; Wang, G.

    2018-04-01

    In this paper, satellite image, remote sensing technique and geographic information system technique are main technical bases. Spectral and other factors comprehensive analysis and visual interpretation are main methods. We use GF-1 and Landsat8 remote sensing satellite image of Wuhan as data source, and from which we extract vegetation distribution, urban heat island relative intensity distribution map and urban flood submergence range. Based on the extracted information, through spatial analysis and regression analysis, we find correlations among heat island effect, vegetation coverage and urban flood. The results show that there is a high degree of overlap between of urban heat island and urban flood. The area of urban heat island has buildings with little vegetation cover, which may be one of the reasons for the local heavy rainstorms. Furthermore, the urban heat island has a negative correlation with vegetation coverage, and the heat island effect can be alleviated by the vegetation to a certain extent. So it is easy to understand that the new industrial zones and commercial areas which under constructions distribute in the city, these land surfaces becoming bare or have low vegetation coverage, can form new heat islands easily.

  11. The role of one large greenspace in mitigating London's nocturnal urban heat island.

    Science.gov (United States)

    Doick, Kieron J; Peace, Andrew; Hutchings, Tony R

    2014-09-15

    The term urban heat island (UHI) describes a phenomenon where cities are on average warmer than the surrounding rural area. Trees and greenspaces are recognised for their strong potential to regulate urban air temperatures and combat the UHI. Empirical data is required in the UK to inform predictions on cooling by urban greenspaces and guide planning to maximise cooling of urban populations. We describe a 5-month study to measure the temperature profile of one of central London's large greenspaces and also in an adjacent street to determine the extent to which the greenspace reduced night-time UHI intensity. Statistical modelling displayed an exponential decay in the extent of cooling with increased distance from the greenspace. The extent of cooling ranged from an estimated 20 m on some nights to 440 m on other nights. The mean temperature reduction over these distances was 1.1 °C in the summer months, with a maximum of 4 °C cooling observed on some nights. Results suggest that calculation of London's UHI using Met Stations close to urban greenspace can underestimate 'urban' heat island intensity due to the cooling effect of the greenspace and values could be in the region of 45% higher. Our results lend support to claims that urban greenspace is an important component of UHI mitigation strategies. Lack of certainty over the variables that govern the extent of the greenspace cooling influence indicates that the multifaceted roles of trees and greenspaces in the UK's urban environment merit further consideration. Crown Copyright © 2014. Published by Elsevier B.V. All rights reserved.

  12. The role of city size and urban form in the surface urban heat island.

    Science.gov (United States)

    Zhou, Bin; Rybski, Diego; Kropp, Jürgen P

    2017-07-06

    Urban climate is determined by a variety of factors, whose knowledge can help to attenuate heat stress in the context of ongoing urbanization and climate change. We study the influence of city size and urban form on the Urban Heat Island (UHI) phenomenon in Europe and find a complex interplay between UHI intensity and city size, fractality, and anisometry. Due to correlations among these urban factors, interactions in the multi-linear regression need to be taken into account. We find that among the largest 5,000 cities, the UHI intensity increases with the logarithm of the city size and with the fractal dimension, but decreases with the logarithm of the anisometry. Typically, the size has the strongest influence, followed by the compactness, and the smallest is the influence of the degree to which the cities stretch. Accordingly, from the point of view of UHI alleviation, small, disperse, and stretched cities are preferable. However, such recommendations need to be balanced against e.g. positive agglomeration effects of large cities. Therefore, trade-offs must be made regarding local and global aims.

  13. The Urban Heat Island Impact in Consideration of Spatial Pattern of Urban Landscape and Structure

    Science.gov (United States)

    Kim, J.; Lee, D. K.; Jeong, W.; Sung, S.; Park, J.

    2015-12-01

    Preceding study has established a clear relationship between land surface temperature and area of land covers. However, only few studies have specifically examined the effects of spatial patterns of land covers and urban structure. To examine how much the local climate is affected by the spatial pattern in highly urbanized city, we investigated the correlation between land surface temperature and spatial patterns of land covers. In the analysis of correlation, we categorized urban structure to four different land uses: Apartment residential area, low rise residential area, industrial area and central business district. Through this study, we aims to examine the types of residential structure and land cover pattern for reducing urban heat island and sustainable development. Based on land surface temperature, we investigated the phenomenon of urban heat island through using the data of remote sensing. This study focused on Daegu in Korea. This city, one of the hottest city in Korea has basin form. We used high-resolution land cover data and land surface temperature by using Landsat8 satellite image to examine 100 randomly selected sample sites of 884.15km2 (1)In each land use, we quantified several landscape-levels and class-level landscape metrics for the sample study sites. (2)In addition, we measured the land surface temperature in 3 year hot summer seasons (July to September). Then, we investigated the pattern of land surface temperature for each land use through Ecognition package. (3)We deducted the Pearson correlation coefficients between land surface temperature and each landscape metrics. (4)We analyzed the variance among the four land uses. (5)Using linear regression, we determined land surface temperature model for each land use. (6)Through this analysis, we aims to examine the best pattern of land cover and artificial structure for reducing urban heat island effect in highly urbanized city. The results of linear regression showed that proportional land

  14. Utilising green and bluespace to mitigate urban heat island intensity.

    Science.gov (United States)

    Gunawardena, K R; Wells, M J; Kershaw, T

    2017-04-15

    It has long been recognised that cities exhibit their own microclimate and are typically warmer than the surrounding rural areas. This 'mesoscale' influence is known as the urban heat island (UHI) effect and results largely from modification of surface properties leading to greater absorption of solar radiation, reduced convective cooling and lower water evaporation rates. Cities typically contain less vegetation and bodies of water than rural areas, and existing green and bluespace is often under threat from increasing population densities. This paper presents a meta-analysis of the key ways in which green and bluespace affect both urban canopy- and boundary-layer temperatures, examined from the perspectives of city-planning, urban climatology and climate science. The analysis suggests that the evapotranspiration-based cooling influence of both green and bluespace is primarily relevant for urban canopy-layer conditions, and that tree-dominated greenspace offers the greatest heat stress relief when it is most needed. However, the magnitude and transport of cooling experienced depends on size, spread, and geometry of greenspaces, with some solitary large parks found to offer minimal boundary-layer cooling. Contribution to cooling at the scale of the urban boundary-layer climate is attributed mainly to greenspace increasing surface roughness and thereby improving convection efficiency rather than evaporation. Although bluespace cooling and transport during the day can be substantial, nocturnal warming is highlighted as likely when conditions are most oppressive. However, when both features are employed together they can offer many synergistic ecosystem benefits including cooling. The ways in which green and bluespace infrastructure is applied in future urban growth strategies, particularly in countries expected to experience rapid urbanisation, warrants greater consideration in urban planning policy to mitigate the adverse effects of the UHI and enhance climate

  15. Solar Panels reduce both global warming and Urban Heat Island

    Directory of Open Access Journals (Sweden)

    Valéry eMasson

    2014-06-01

    Full Text Available The production of solar energy in cities is clearly a way to diminish our dependency to fossil fuels, and is a good way to mitigate global warming by lowering the emission of greenhouse gases. However, what are the impacts of solar panels locally ? To evaluate their influence on urban weather, it is necessary to parameterize their effects within the surface schemes that are coupled to atmospheric models. The present paper presents a way to implement solar panels in the Town Energy Balance scheme, taking account of the energy production (for thermal and photovoltaic panels, the impact on the building below and feedback towards the urban micro-climate through radiative and convective fluxes. A scenario of large but realistic deployment of solar panels on the Paris metropolitan area is then simulated. It is shown that solar panels, by shading the roofs, slightly increases the need for domestic heating (3%. In summer however, the solar panels reduce the energy needed for air-conditioning (by 12% and also the Urban Heat Island (UHI: 0.2K by day and up to 0.3K at night. These impacts are larger than those found in previous works, because of the use of thermal panels (that are more efficient than photovoltaic panels and the geographical position of Paris, which is relatively far from the sea. This means that it is not influenced by sea breezes, and hence that its UHI is stronger than for a coastal city of the same size. But this also means that local adaptation strategies aiming to decrease the UHI will have more potent effects. In summary, the deployment of solar panels is good both globally, to produce renewable energy (and hence to limit the warming of the climate and locally, to decrease the UHI, especially in summer, when it can constitute a health threat.

  16. In Vitro Investigation of Heat Transfer Phenomenon in Human Immature Teeth

    OpenAIRE

    Maryam Talebi; Sahar Moghimi; Mina Shafagh; Hadi Kalani; Fatemeh Mazhari

    2014-01-01

    Background and aims. Heat generated within tooth during clinical dentistry can cause thermally induced damage to hard and soft components of the tooth (enamel, dentin and pulp). Geometrical characteristics of immature teeth are different from those of mature teeth. The purpose of this experimental and theoretical study was to investigate thermal changes in immature permanent teeth during the use of LED light-curing units (LCU). Materials and methods. This study was performed on the second ...

  17. Urban heat island investigations in Arctic cities of northwestern Russia

    Science.gov (United States)

    Shumilov, Oleg I.; Kasatkina, Elena A.; Kanatjev, Alexander G.

    2017-12-01

    Urban microclimate peculiarities in two Arctic cities in northwestern Russia—Kirovsk (67.62°N, 33.67°E) and Apatity (67.57°N, 33.38°E)—were investigated by using mobile temperature records. The experiment was carried out in and around Apatity and Kirovsk in February 2014 and December 2016. The DS18B20 digital thermometer was installed on the roof of a car (height: approximately 1.2 m) to measure and record temperature variations automatically. In addition to the digital thermometer, the car was also equipped with an onboard global positioning system, allowing every temperature measurement to be referenced with an altitude and a latitude/longitude position. The possibility of urban heat island formation in these polar cities, above the Arctic Circle, was studied. Our analysis indicated that on 11 February 2014, the temperature varied in accordance with the background environmental lapse rate (-0.0045°C m-1), and nearly corresponded to it (-0.0165°C m-1) on 12 February 2014. On 6 December 2016, a strong local temperature inversion with a positive value of 0.032°C m-1 was detected, seemingly caused by the formation of a cold air pool in the valley near Kirovsk. It was found that the temperature variations within and outside these cities are strongly influenced by local topographic effects and the physical conditions of the atmospheric boundary layer.

  18. Seasonal Variations of the Surface Urban Heat Island in a Semi-Arid City

    Directory of Open Access Journals (Sweden)

    Sirous Haashemi

    2016-04-01

    Full Text Available The process of the surface urban heat island (SUHI varies with latitude, climate, topography and meteorological conditions. This study investigated the seasonal variability of SUHI in the Tehran metropolitan area, Iran, with respect to selected surface biophysical variables. Terra Moderate Resolution Imaging Spectroradiometer (MODIS Land Surface Temperature (LST was retrieved as nighttime LST data, while daytime LST was retrieved from Landsat 8 Thermal Infrared Sensor (TIRS using the split-window algorithm. Both data covered the time period from September 2013 to September 2015. To assess SUHI intensity, we employed three SUHI indicators, i.e., the LST difference of urban-rural, that of urban-agriculture and that of urban-water. Physical and biophysical surface variables, including land use and land cover (LULC, elevation, impervious surface (IS, fractional vegetation cover (FVC and albedo, were selected to estimate the relationship between LST seasonal variability and the surface properties. Results show that an inversion of the SUHI phenomenon (i.e., surface urban cool island existed at daytime with the maximal value of urban-rural LST difference of −4 K in March; whereas the maximal value of SUHI at nighttime yielded 3.9 K in May. When using the indicators of urban-agriculture and urban-water LST differences, the maximal value of SUHI was found to be 8.2 K and 15.5 K, respectively. Both results were observed at daytime, suggesting the role of bare soils in the inversion of the SUHI phenomenon with the urban-rural indicator. Maximal correlation was observed in the relationship between night LST and elevation in spring (coefficient: −0.76, night LST and IS in spring (0.60, night LST and albedo in winter (−0.53 and day LST with fractional vegetation cover in summer (−0.41. The relationship between all surface properties with LST possessed large seasonal variations, and thus, using these relationships for SUHI modeling may not be

  19. Thermosyphon Phenomenon as an alternate heat sink of Shutdown Cooling System for the CANDU reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jonghyun [GNEST, Seoul (Korea, Republic of); Lee, Kwangho; Oh, Haechol; Jun, Hwangyong [KEPRI, Taejon (Korea, Republic of)

    2006-07-01

    During the outage(overhaul) of the CANDU plant, there is a period when the coolant is partially drained to the reactor header level and the coolant is cooled and depressurized by Shutdown Cooling System(SDCS) other than PHTS pump. In the postulated accident of the loss of SDCS-the PHTS pump failure, the primary coolant system should be cooled by the alternate heat sink using the thermosyphon pheonomenon(TS) through the steam generator(SG) This study was aimed at verification and analyzing the core cooling ability of the TS. And the sensitivity analysis was done for the number of SGs used in the TS. As an analysis tool, RELAP5/CANDU was used.

  20. Stabilization of a magnetic island by localized heating in a tokamak with stiff temperature profile

    Science.gov (United States)

    Maget, Patrick; Widmer, Fabien; Février, Olivier; Garbet, Xavier; Lütjens, Hinrich

    2018-02-01

    In tokamaks plasmas, turbulent transport is triggered above a threshold in the temperature gradient and leads to stiff profiles. This particularity, neglected so far in the problem of magnetic island stabilization by a localized heat source, is investigated analytically in this paper. We show that the efficiency of the stabilization is deeply modified compared to the previous estimates due to the strong dependence of the turbulence level on the additional heat source amplitude inside the island.

  1. Urban heat island research of Novi Sad (Serbia: A review

    Directory of Open Access Journals (Sweden)

    Savić Stevan

    2013-01-01

    Full Text Available In the second part of the 20th century, urbanization accelerated and reached enormous magnitude, which results more and more people live in urbanized regions. Nowadays, about half of the human population is affected by the burdens of urban environments and furthermore the modified parameters of the urban atmosphere compared to the natural environment. Novi Sad (45°15’N, 19°50’E is located in the northern part of Serbia, i.e. on the southern part of the Pannonian Plain and it is the second largest city in the country with a population of about 320,000 in a built-up area of approximately 80 km2. The geographical area is plain, from 80 to 86 m a.s.l., with a gentle relief, so its climate is free from orographic effects. According to Köppen-Geiger climate classification, this region is categorised as Cfa climate (temperate warm climate with a rather uniform annual distribution of precipitation. In the last 20 years, a few papers have been published considering urban heat island (UHI investigations of Novi Sad. The first publication in 1994 is theoretically based and presents all parameters, methods and measurements, which have to be used in order to work on UHI research of Novi Sad. The next studies from 1995 and 2006 analyzed various temperature parameters based on 30-40 year long time series and used rural and urban stations in order to get urban-rural temperature differences. Based on meteorological parameters and the structure of urban area, in 2010 the necessity of defining locations of an urban climate network was showed in order to advance further UHI research. In the last two publications from 2011 a new empirical modeling method, adjusted for cities located on plains, has been used in order to determine locations for representative stations of an urban climate network in Novi Sad.

  2. The impact of heat waves on surface urban heat island and local economy in Cluj-Napoca city, Romania

    Science.gov (United States)

    Herbel, Ioana; Croitoru, Adina-Eliza; Rus, Adina Viorica; Roşca, Cristina Florina; Harpa, Gabriela Victoria; Ciupertea, Antoniu-Flavius; Rus, Ionuţ

    2017-07-01

    The association between heat waves and the urban heat island effect can increase the impact on environment and society inducing biophysical hazards. Heat stress and their associated public health problems are among the most frequent. This paper explores the heat waves impact on surface urban heat island and on the local economy loss during three heat periods in Cluj-Napoca city in the summer of 2015. The heat wave events were identified based on daily maximum temperature, and they were divided into three classes considering the intensity threshold: moderate heat waves (daily maximum temperature exceeding the 90th percentile), severe heat waves (daily maximum temperature over the 95th percentile), and extremely severe heat waves (daily maximum temperature exceeding the 98th percentile). The minimum length of an event was of minimum three consecutive days. The surface urban heat island was detected based on land surface temperature derived from Landsat 8 thermal infrared data, while the economic impact was estimated based on data on work force structure and work productivity in Cluj-Napoca derived from the data released by Eurostat, National Bank of Romania, and National Institute of Statistics. The results indicate that the intensity and spatial extension of surface urban heat island could be governed by the magnitude of the heat wave event, but due to the low number of satellite images available, we should consider this information only as preliminary results. Thermal infrared remote sensing has proven to be a very efficient method to study surface urban heat island, due to the fact that the synoptic conditions associated with heat wave events usually favor cloud free image. The resolution of the OLI_TIRS sensor provided good results for a mid-extension city, but the low revisiting time is still a drawback. The potential economic loss was calculated for the working days during heat waves and the estimated loss reached more than 2.5 mil. EUR for each heat wave day

  3. Thermal signatures of urban land cover types: High-resolution thermal infrared remote sensing of urban heat island in Huntsville, AL

    Science.gov (United States)

    Lo, Chor Pang

    1996-01-01

    The main objective of this research is to apply airborne high-resolution thermal infrared imagery for urban heat island studies, using Huntsville, AL, a medium-sized American city, as the study area. The occurrence of urban heat islands represents human-induced urban/rural contrast, which is caused by deforestation and the replacement of the land surface by non-evaporating and non-porous materials such as asphalt and concrete. The result is reduced evapotranspiration and more rapid runoff of rain water. The urban landscape forms a canopy acting as a transitional zone between the atmosphere and the land surface. The composition and structure of this canopy have a significant impact on the thermal behavior of the urban environment. Research on the trends of surface temperature at rapidly growing urban sites in the United States during the last 30 to 50 years suggests that significant urban heat island effects have caused the temperatures at these sites to rise by 1 to 2 C. Urban heat islands have caused changes in urban precipitation and temperature that are at least similar to, if not greater than, those predicted to develop over the next 100 years by global change models. Satellite remote sensing, particularly NOAA AVHRR thermal data, has been used in the study of urban heat islands. Because of the low spatial resolution (1.1 km at nadir) of the AVHRR data, these studies can only examine and map the phenomenon at the macro-level. The present research provides the rare opportunity to utilize 5-meter thermal infrared data acquired from an airplane to characterize more accurately the thermal responses of different land cover types in the urban landscape as input to urban heat island studies.

  4. Identification of Mesoscale Convective Complex (MCC) phenomenon with image of Himawari 8 Satellite and WRF ARW Model on Bangka Island (Case Study: 7-8 February 2016)

    Science.gov (United States)

    Rinaldy, Nanda; Saragih, Immanuel J. A.; Wandala Putra, Agie; Redha Nugraheni, Imma; Wijaya Yonas, Banu

    2017-12-01

    Based on monitoring on 7th and 8th February 2016 there has been a flood that occurred due to heavy rainfall in a long time in some areas of Bangka Island. Mesoscale Convective Complex (MCC) is one type of Mesoscale Convective System (MCS). Previous research on MCC mentions that MCC can cause heavy rain for a long time. This study aims to identify the phenomenon of MCC in Bangka Island both in the satellite imagery and the output of the model. In addition, this study was also conducted to determine the effect of MCC on the weather conditions in Bangka Island. The study area in this research is Bangka Island with Pangkalpinang Meteorological Station as the centre of research. The data used in this research are FNL (Final Analysis) data from http://rda.ucar.edu/, Satellite Image of Himawari-8 IR1 Channel from BMKG, and meteorological observation data (synoptic and radiosonde) from Pangkalpinang Meteorological Station. The FNL data is simulated using the WRF-ARW model, verified using observation data and then visualized using GrADS. The results of the analysis of Himawari-8 satellite image data showed that two MCCs occurred on 7th and 8th February 2016 on Bangka Island and the MCC was nocturnal, which appeared at night which then continued until extinction in the morning the next day. In a peak cloud temperature review with the coordinates of Pangkalpinang Meteorological Station (-2,163 N 106,137 E) when 1st MCC and 2nd MCC events ranged from -60°C to -80°C. The result of WRF-ARW model output analysis shows that MCC area has high humidity value and positive vertical velocity value which indicates the potential of heavy rain for a long time.

  5. An Evidence-Based Review of Impacts, Strategies and Tools to Mitigate Urban Heat Islands

    Directory of Open Access Journals (Sweden)

    Walter Leal Filho

    2017-12-01

    Full Text Available The impacts of climate changes on cities, which are home to over half of the world’s population, are already being felt. In many cases, the intensive speed with which urban centres have been growing means that little attention has been paid to the role played by climatic factors in maintaining quality of life. Among the negative consequences of rapid city growth is the expansion of the problems posed by urban heat islands (UHIs, defined as areas in a city that are much warmer than other sites, especially in comparison with rural areas. This paper analyses the consistency of the UHI-related literature in three stages: first it outlines its characteristics and impacts in a wide variety of cities around the world, which poses pressures to public health in many different countries. Then it introduces strategies which may be employed in order to reduce its effects, and finally it analyses available tools to systematize the initial high level assessment of the phenomenon for multidisciplinary teams involved in the urban planning process. The analysis of literature on the characteristics, impacts, strategies and digital tools to assess on the UHI, reveals the wide variety of parameters, methods, tools and strategies analysed and suggested in the different studies, which does not always allow to compare or standardize the diagnosis or solutions.

  6. An Evidence-Based Review of Impacts, Strategies and Tools to Mitigate Urban Heat Islands

    Science.gov (United States)

    Leal Filho, Walter; Echevarria Icaza, Leyre; Emanche, Victoria Omeche; Quasem Al-Amin, Abul

    2017-01-01

    The impacts of climate changes on cities, which are home to over half of the world’s population, are already being felt. In many cases, the intensive speed with which urban centres have been growing means that little attention has been paid to the role played by climatic factors in maintaining quality of life. Among the negative consequences of rapid city growth is the expansion of the problems posed by urban heat islands (UHIs), defined as areas in a city that are much warmer than other sites, especially in comparison with rural areas. This paper analyses the consistency of the UHI-related literature in three stages: first it outlines its characteristics and impacts in a wide variety of cities around the world, which poses pressures to public health in many different countries. Then it introduces strategies which may be employed in order to reduce its effects, and finally it analyses available tools to systematize the initial high level assessment of the phenomenon for multidisciplinary teams involved in the urban planning process. The analysis of literature on the characteristics, impacts, strategies and digital tools to assess on the UHI, reveals the wide variety of parameters, methods, tools and strategies analysed and suggested in the different studies, which does not always allow to compare or standardize the diagnosis or solutions. PMID:29257100

  7. The urban climate: urban heat island of Salamanca El clima de las ciudades: isla de calor de Salamanca

    Directory of Open Access Journals (Sweden)

    Mª Salud Alonso García

    2004-12-01

    Full Text Available We have determined the existence of the urban heat island (UHI in a medium-sized city, with an extreme climate and few important foci of industrial pollution. It was seen that urban warming can arise in cities of these characteristics, being able to influence in the alive beings of the zone. By comparing the temperature series in an urban area and those from a nearby rural area, we studied the temporal evolution of the intensity of the UHI for the three-year period between 1996 and 1998. We detected two phenomenons: nocturnal heat island, when the difference of temperature between city and rural zone is positive, and diurnal heat island, when is negative. The most intense nocturnal heat island was seen in autumn, and the most intense diurnal heat island was seen in spring. Statistical study of the annual series corresponding to the night-time heat island permits a definition for Salamanca: a weak island, such as the one showing an intensity lower than 2.0 oC, a moderate island, if the intensity lies between 2.0 oC and 4.0 oC, and an intense island when a values greater than 4.0 oC is passed.En este trabajo se ha determinado la existencia de la isla de calor urbana (ICU, en una ciudad de tamaño medio, con un clima extremado y focos industriales de poca actividad. Con lo que se puede comprobar cómo afecta el calentamiento urbano a ciudades de estas características, pudiendo influir en los seres vivos de la zona. La existencia del fenómeno isla de calor, y su evolución en el tiempo, se han observado comparando los datos de temperatura registrados en una estación meteorológica situada en la ciudad, con los de otra estación fuera del radio de acción de la urbe, durante el período 1996-1998. Se han detectado dos fenómenos: la isla de calor nocturna, cuando la diferencia térmica entre la ciudad y la zona rural es positiva, que presenta sus valores más altos en otoño, y la isla de calor diurna, cuando la diferencia es negativa, que

  8. Heat transport in the quasi-single-helicity islands of EXTRAP T2R

    Science.gov (United States)

    Frassinetti, L.; Brunsell, P. R.; Drake, J.

    2009-03-01

    The heat transport inside the magnetic island generated in a quasi-single-helicity regime of a reversed-field pinch device is studied by using a numerical code that simulates the electron temperature and the soft x-ray emissivity. The heat diffusivity χe inside the island is determined by matching the simulated signals with the experimental ones. Inside the island, χe turns out to be from one to two orders of magnitude lower than the diffusivity in the surrounding plasma, where the magnetic field is stochastic. Furthermore, the heat transport properties inside the island are studied in correlation with the plasma current and with the amplitude of the magnetic fluctuations.

  9. Urban heat island effect on cicada densities in metropolitan Seoul

    Directory of Open Access Journals (Sweden)

    Hoa Q. Nguyen

    2018-01-01

    Full Text Available Background Urban heat island (UHI effect, the ubiquitous consequence of urbanization, is considered to play a major role in population expansion of numerous insects. Cryptotympana atrata and Hyalessa fuscata are the most abundant cicada species in the Korean Peninsula, where their population densities are higher in urban than in rural areas. We predicted a positive relationship between the UHI intensities and population densities of these two cicada species in metropolitan Seoul. Methods To test this prediction, enumeration surveys of cicada exuviae densities were conducted in 36 localities located within and in the vicinity of metropolitan Seoul. Samples were collected in two consecutive periods from July to August 2015. The abundance of each species was estimated by two resource-weighted densities, one based on the total geographic area, and the other on the total number of trees. Multiple linear regression analyses were performed to identify factors critical for the prevalence of cicada species in the urban habitat. Results C. atrata and H. fuscata were major constituents of cicada species composition collected across all localities. Minimum temperature and sampling period were significant factors contributing to the variation in densities of both species, whereas other environmental factors related to urbanization were not significant. More cicada exuviae were collected in the second rather than in the first samplings, which matched the phenological pattern of cicadas in metropolitan Seoul. Cicada population densities increased measurably with the increase in temperature. Age of residential complex also exhibited a significantly positive correlation to H. fuscata densities, but not to C. atrata densities. Discussion Effects of temperature on cicada densities have been discerned from other environmental factors, as cicada densities increased measurably in tandem with elevated temperature. Several mechanisms may contribute to the abundance of

  10. Seasonal and Spatial Characteristics of Urban Heat Islands (UHIs in Northern West Siberian Cities

    Directory of Open Access Journals (Sweden)

    Victoria Miles

    2017-09-01

    Full Text Available Anthropogenic heat and modified landscapes raise air and surface temperatures in urbanized areas around the globe. This phenomenon is widely known as an urban heat island (UHI. Previous UHI studies, and specifically those based on remote sensing data, have not included cities north of 60°N. A few in situ studies have indicated that even relatively small cities in high latitudes may exhibit significantly amplified UHIs. The UHI characteristics and factors controlling its intensity in high latitudes remain largely unknown. This study attempts to close this knowledge gap for 28 cities in northern West Siberia (NWS. NWS cities are convenient for urban intercomparison studies as they have relatively similar cold continental climates, and flat, rather homogeneous landscapes. We investigated the UHI in NWS cities using the moderate-resolution imaging spectroradiometer (MODIS MOD 11A2 land surface temperature (LST product in 8-day composites. The analysis reveals that all 28 NWS cities exhibit a persistent UHI in summer and winter. The LST analysis found differences in summer and winter regarding the UHI effect, and supports the hypothesis of seasonal differences in the causes of UHI formation. Correlation analysis found the strongest relationships between the UHI and population (log P. Regression models using log P alone could explain 65–67% of the variability of UHIs in the region. Additional explanatory power—at least in summer—is provided by the surrounding background temperatures, which themselves are strongly correlated with latitude. The performed regression analysis thus confirms the important role of the surrounding temperature in explaining spatial–temporal variation of UHI intensity. These findings suggest a climatological basis for these phenomena and, given the importance of climatic warming, an aspect that deserves future study.

  11. The effectiveness of cool and green roofs as urban heat island mitigation strategies

    International Nuclear Information System (INIS)

    Li, Dan; Bou-Zeid, Elie; Oppenheimer, Michael

    2014-01-01

    Mitigation of the urban heat island (UHI) effect at the city-scale is investigated using the Weather Research and Forecasting (WRF) model in conjunction with the Princeton Urban Canopy Model (PUCM). Specifically, the cooling impacts of green roof and cool (white/high-albedo) roof strategies over the Baltimore-Washington metropolitan area during a heat wave period (7 June–10 June 2008) are assessed using the optimal set-up of WRF-PUCM described in the companion paper by Li and Bou-Zeid (2014). Results indicate that the surface UHI effect (defined based on the urban–rural surface temperature difference) is reduced significantly more than the near-surface UHI effect (defined based on urban–rural 2 m air temperature difference) when these mitigation strategies are adopted. In addition, as the green and cool roof fractions increase, the surface and near-surface UHIs are reduced almost linearly. Green roofs with relatively abundant soil moisture have comparable effect in reducing the surface and near-surface UHIs to cool roofs with an albedo value of 0.7. Significant indirect effects are also observed for both green and cool roof strategies; mainly, the low-level advection of atmospheric moisture from rural areas into urban terrain is enhanced when the fraction of these roofs increases, thus increasing the humidity in urban areas. The additional benefits or penalties associated with modifications of the main physical determinants of green or cool roof performance are also investigated. For green roofs, when the soil moisture is increased by irrigation, additional cooling effect is obtained, especially when the ‘unmanaged’ soil moisture is low. The effects of changing the albedo of cool roofs are also substantial. These results also underline the capabilities of the WRF-PUCM framework to support detailed analysis and diagnosis of the UHI phenomenon, and of its different mitigation strategies. (letter)

  12. Urban Heat Islands and Their Mitigation vs. Local Impacts of Climate Change

    Science.gov (United States)

    Taha, H.

    2007-12-01

    Urban heat islands and their mitigation take on added significance, both negative and positive, when viewed from a climate-change perspective. In negative terms, urban heat islands can act as local exacerbating factors, or magnifying lenses, to the effects of regional and large-scale climate perturbations and change. They can locally impact meteorology, energy/electricity generation and use, thermal environment (comfort and heat waves), emissions of air pollutants, photochemistry, and air quality. In positive terms, on the other hand, mitigation of urban heat islands (via urban surface modifications and control of man-made heat, for example) can potentially have a beneficial effect of mitigating the local negative impacts of climate change. In addition, mitigation of urban heat islands can, in itself, contribute to preventing regional and global climate change, even if modestly, by helping reduce CO2 emissions from power plants and other sources as a result of decreased energy use for cooling (both direct and indirect) and reducing the rates of meteorology-dependent emissions of air pollutants. This presentation will highlight aspects and characteristics of heat islands, their mitigation, their modeling and quantification techniques, and recent advances in meso-urban modeling of California (funded by the California Energy Commission). In particular, the presentation will focus on results from quantitative, modeling-based analyses of the potential benefits of heat island mitigation in 1) reducing point- and area-source emissions of CO2, NOx, and VOC as a result of reduced cooling energy demand and ambient/surface temperatures, 2) reducing evaporative and fugitive hydrocarbon emissions as a result of lowered temperatures, 3) reducing biogenic hydrocarbon emissions from existing vegetative cover, 4) slowing the rates of tropospheric/ground-level ozone formation and/or accumulation in the urban boundary layer, and 5) helping improve air quality. Quantitative estimates

  13. A study of the Oklahoma City urban heat island using ground measurements and remote sensing

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M. J. (Michael J.); Ivey, A. (Austin); McPherson, T. N. (Timothy N.); Boswell, D. (David); Pardyjak, E. R. (Eric R.)

    2004-01-01

    Measurements of temperature and position were collected during the night from an instrumented van on routes through Oklahoma City and the rural outskirts. The measurements were taken as part of the Joint URBAN 2003 Tracer Field Experiment conducted in Oklahoma City from June 29, 2003 to July 30, 2003 (Allwine et al., 2004). The instrumented van was driven over four primary routes that included legs from the downtown core to four different 'rural' areas. Each route went through residential areas and most often went by a line of permanently fixed temperature probes (Allwine et al., 2004) for cross-checking purposes. Each route took from 20 to 40 minutes to complete. Based on seven nights of data, initial analyses indicate that there was a temperature difference of 0.5-6.5 C between the urban core and nearby 'rural' areas. Analyses also suggest that there were significant fine scale temperature differences over distances of tens of meters within the city and in the nearby rural areas. The temperature measurements that were collected are intended to supplement the meteorological measurements taken during the Joint URBAN 2003 Field Experiment, to assess the importance of the urban heat island phenomenon in Oklahoma City, and to test new urban canopy parameterizations that have been developed for regional scale meteorological codes (e.g., Chin et al., 2000; Holt and Shi, 2004). In addition to the ground measurements, skin temperature measurements were also analyzed from remotely sensed images taken from the Earth Observing System's Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER). A surface kinetic temperature thermal infrared image captured by the ASTER of the Oklahoma City area on July 21, 2001 was analyzed within ESRI's ArcGIS 8.3 to correlate variations in temperature with land use type. Analysis of this imagery suggests distinct variations in temperature across different land use categories. Through the use of

  14. Diffusive heat transport across magnetic islands and stochastic layers in tokamaks

    International Nuclear Information System (INIS)

    Hoelzl, Matthias

    2010-01-01

    Heat transport in tokamak plasmas with magnetic islands and ergodic field lines was simulated at realistic plasma parameters in realistic tokamak geometries. This requires the treatment of anisotropic heat diffusion, which is more efficient along magnetic field lines by up to ten orders of magnitude than perpendicular to them. Comparisons with analytical predictions and experimental measurements allow to determine the stability properties of neoclassical tearing modes as well as the experimental heat diffusion anisotropy.

  15. Analysis and modelling of surface Urban Heat Island in 20 Canadian cities under climate and land-cover change.

    Science.gov (United States)

    Gaur, Abhishek; Eichenbaum, Markus Kalev; Simonovic, Slobodan P

    2018-01-15

    Surface Urban Heat Island (SUHI) is an urban climate phenomenon that is expected to respond to future climate and land-use land-cover change. It is important to further our understanding of physical mechanisms that govern SUHI phenomenon to enhance our ability to model future SUHI characteristics under changing geophysical conditions. In this study, SUHI phenomenon is quantified and modelled at 20 cities distributed across Canada. By analyzing MODerate Resolution Imaging Spectroradiometer (MODIS) sensed surface temperature at the cities over 2002-2012, it is found that 16 out of 20 selected cities have experienced a positive SUHI phenomenon while 4 cities located in the prairies region and high elevation locations have experienced a negative SUHI phenomenon in the past. A statistically significant relationship between observed SUHI magnitude and city elevation is also recorded over the observational period. A Physical Scaling downscaling model is then validated and used to downscale future surface temperature projections from 3 GCMs and 2 extreme Representative Concentration Pathways in the urban and rural areas of the cities. Future changes in SUHI magnitudes between historical (2006-2015) and future timelines: 2030s (2026-2035), 2050s (2046-2055), and 2090s (2091-2100) are estimated. Analysis of future projected changes indicate that 15 (13) out of 20 cities can be expected to experience increases in SUHI magnitudes in future under RCP 2.6 (RCP 8.5). A statistically significant relationship between projected future SUHI change and current size of the cities is also obtained. The study highlights the role of city properties (i.e. its size, elevation, and surrounding land-cover) towards shaping their current and future SUHI characteristics. The results from this analysis will help decision-makers to manage Canadian cities more efficiently under rapidly changing geophysical and demographical conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. ANALYSIS OF THE INTRA-CITY VARIATION OF URBAN HEAT ISLAND AND ITS RELATION TO LAND SURFACE/COVER PARAMETERS

    Directory of Open Access Journals (Sweden)

    D. Gerçek

    2016-06-01

    Full Text Available Along with urbanization, sealing of vegetated land and evaporation surfaces by impermeable materials, lead to changes in urban climate. This phenomenon is observed as temperatures several degrees higher in densely urbanized areas compared to the rural land at the urban fringe particularly at nights, so-called Urban Heat Island. Urban Heat Island (UHI effect is related with urban form, pattern and building materials so far as it is associated with meteorological conditions, air pollution, excess heat from cooling. UHI effect has negative influences on human health, as well as other environmental problems such as higher energy demand, air pollution, and water shortage. Urban Heat Island (UHI effect has long been studied by observations of air temperature from thermometers. However, with the advent and proliferation of remote sensing technology, synoptic coverage and better representations of spatial variation of surface temperature became possible. This has opened new avenues for the observation capabilities and research of UHIs. In this study, "UHI effect and its relation to factors that cause it" is explored for İzmit city which has been subject to excess urbanization and industrialization during the past decades. Spatial distribution and variation of UHI effect in İzmit is analysed using Landsat 8 and ASTER day & night images of 2015 summer. Surface temperature data derived from thermal bands of the images were analysed for UHI effect. Higher temperatures were classified into 4 grades of UHIs and mapped both for day and night. Inadequate urban form, pattern, density, high buildings and paved surfaces at the expanse of soil ground and vegetation cover are the main factors that cause microclimates giving rise to spatial variations in temperatures across cities. These factors quantified as land surface/cover parameters for the study include vegetation index (NDVI, imperviousness (NDISI, albedo, solar insolation, Sky View Factor (SVF, building

  17. Analysis of the Intra-City Variation of Urban Heat Island and its Relation to Land Surface/cover Parameters

    Science.gov (United States)

    Gerçek, D.; Güven, İ. T.; Oktay, İ. Ç.

    2016-06-01

    Along with urbanization, sealing of vegetated land and evaporation surfaces by impermeable materials, lead to changes in urban climate. This phenomenon is observed as temperatures several degrees higher in densely urbanized areas compared to the rural land at the urban fringe particularly at nights, so-called Urban Heat Island. Urban Heat Island (UHI) effect is related with urban form, pattern and building materials so far as it is associated with meteorological conditions, air pollution, excess heat from cooling. UHI effect has negative influences on human health, as well as other environmental problems such as higher energy demand, air pollution, and water shortage. Urban Heat Island (UHI) effect has long been studied by observations of air temperature from thermometers. However, with the advent and proliferation of remote sensing technology, synoptic coverage and better representations of spatial variation of surface temperature became possible. This has opened new avenues for the observation capabilities and research of UHIs. In this study, "UHI effect and its relation to factors that cause it" is explored for İzmit city which has been subject to excess urbanization and industrialization during the past decades. Spatial distribution and variation of UHI effect in İzmit is analysed using Landsat 8 and ASTER day & night images of 2015 summer. Surface temperature data derived from thermal bands of the images were analysed for UHI effect. Higher temperatures were classified into 4 grades of UHIs and mapped both for day and night. Inadequate urban form, pattern, density, high buildings and paved surfaces at the expanse of soil ground and vegetation cover are the main factors that cause microclimates giving rise to spatial variations in temperatures across cities. These factors quantified as land surface/cover parameters for the study include vegetation index (NDVI), imperviousness (NDISI), albedo, solar insolation, Sky View Factor (SVF), building envelope

  18. A Numerical Study on Impact of Taiwan Island Surface Heat Flux on Super Typhoon Haitang (2005)

    OpenAIRE

    Xu, Hongxiong

    2015-01-01

    Three to four tropical cyclones (TCs) by average usually impact Taiwan every year. This study, using the Developmental Tested Center (DTC) version of the Hurricane WRF (HWRF) model, examines the effects of Taiwan’s island surface heat fluxes on typhoon structure, intensity, track, and its rainfall over the island. The numerical simulation successfully reproduced the structure and intensity of super Typhoon Haitang. The model, especially, reproduced the looped path and landfall at nearly the ...

  19. Key Parameters for Urban Heat Island Assessment in A Mediterranean Context: A Sensitivity Analysis Using the Urban Weather Generator Model

    Science.gov (United States)

    Salvati, Agnese; Palme, Massimo; Inostroza, Luis

    2017-10-01

    Although Urban Heat Island (UHI) is a fundamental effect modifying the urban climate, being widely studied, the relative weight of the parameters involved in its generation is still not clear. This paper investigates the hierarchy of importance of eight parameters responsible for UHI intensity in the Mediterranean context. Sensitivity analyses have been carried out using the Urban Weather Generator model, considering the range of variability of: 1) city radius, 2) urban morphology, 3) tree coverage, 4) anthropogenic heat from vehicles, 5) building’s cooling set point, 6) heat released to canyon from HVAC systems, 7) wall construction properties and 8) albedo of vertical and horizontal surfaces. Results show a clear hierarchy of significance among the considered parameters; the urban morphology is the most important variable, causing a relative change up to 120% of the annual average UHI intensity in the Mediterranean context. The impact of anthropogenic sources of heat such as cooling systems and vehicles is also significant. These results suggest that urban morphology parameters can be used as descriptors of the climatic performance of different urban areas, easing the work of urban planners and designers in understanding a complex physical phenomenon, such as the UHI.

  20. Assessment of Urban Heat Islands in Small- and Mid-Sized Cities in Brazil

    Directory of Open Access Journals (Sweden)

    Renata dos Santos Cardoso

    2017-02-01

    Full Text Available Urban heat islands (UHIs in large cities and different climatic regions have been thoroughly studied; however, their effects are becoming a common concern in smaller cities as well. We assessed UHIs in three tropical cities, analyzing how synoptic conditions, urban morphology, and land cover affect the heat island magnitude. Data gathering involved mobile surveys across Paranavaí (Paraná, Rancharia (São Paulo, and Presidente Prudente (São Paulo, Brazil, during summer evenings (December 2013–January 2014. Temperature data collected over five days in each city point to heat islands with magnitudes up to 6 °C, under calm synoptic conditions, whereas summer average UHI magnitudes peak at 3.7 °C. In addition, UHI magnitudes were higher in areas with closely spaced buildings and few or no trees and building materials that are not appropriate for the region’s climate and thermal comfort.

  1. Avery Island heater tests: measured data for 1000 days of heating

    International Nuclear Information System (INIS)

    Van Sambeek, L.L.; Stickney, R.G.; DeJong, K.B.

    1983-10-01

    Three heater tests were conducted in the Avery Island salt mine. The measurements of temperature and displacement, and the calculation of stress in the vicinity of each heater are of primary importance in the understanding of the thermal and thermomechanical response of the salt to an emplaced heat source. This report presents the temperature, displacement, and calculated stress data gathered during the heating phase of the three heater tests. The data presented have application in the ongoing studies of the response of geologicic media to an emplaced heat source. Specifically, electric heaters, which simulate canisters of heat-generating nuclear waste, were placed in the floor of the Avery Island salt mine, and measurements were made of the response of the salt caused by the heating. The purpose of this report is to transmit the data to the scientific community; rigorous analysis and interpretation of the data are considered beyond the scope of this data report. 11 references, 46 figures

  2. Monitoring of urban heat island over Shenzhen, China using remotely sensed measurements

    Science.gov (United States)

    Wang, Weimin; Hong, Liang; Yang, Lijun; He, Lihuan; Dong, Guihua

    2016-05-01

    In the past three decades, the Shenzhen city, which is located in south of China, has experienced a rapid urbanization process characterized by sharp decrease in farmland and increases in urban area. This rapid urbanization is one of the main causes of many environmental and ecological problems including urban heat island (UHI). Therefore, the monitoring of rapid urbanization regions and the environment is of critical importance for their sustainable development. In this study, Landsat-8 OLI and TIR images, which were acquired on 2013, are used to monitor urban heat island. After radiometric calibration and atmospheric correction with a simplified method for the atmospheric correction (SMAC) are applied to OLI image, an index-based build-up index (IBI), which is based on the soil adjusted vegetation index (SAVI), the modified normalized difference water index (MNDWI) and the normalized difference built-up index (NDBI), is employed to extract the build-up land features with a given thresholds. A single-channel algorithm is used to retrieve land surface temperature while the land surface emissivity is derived from a normalized differential vegetation index (NDVI) thresholds method. Surface urban heat island index (SUHII) and urban heat island ratio index (URI) are computed for ten districts of Shenzhen based on build-up land distribution and land surface temperature data. A correlation analysis is conducted between heat island index (including SUHII and URI) and socio-economic statistics (including total population and population density) also are included in this analysis. The results show that, a weak relationship between urban heat island and socio-economic statistics are found.

  3. Different Patterns of the Urban Heat Island Intensity from Cluster Analysis

    Science.gov (United States)

    Silva, F. B.; Longo, K.

    2014-12-01

    This study analyzes the different variability patterns of the Urban Heat Island intensity (UHII) in the Metropolitan Area of Rio de Janeiro (MARJ), one of the largest urban agglomerations in Brazil. The UHII is defined as the difference in the surface air temperature between the urban/suburban and rural/vegetated areas. To choose one or more stations that represent those areas we used the technique of cluster analysis on the air temperature observations from 14 surface weather stations in the MARJ. The cluster analysis aims to classify objects based on their characteristics, gathering similar groups. The results show homogeneity patterns between air temperature observations, with 6 homogeneous groups being defined. Among those groups, one might be a natural choice for the representative urban area (Central station); one corresponds to suburban area (Afonsos station); and another group referred as rural area is compound of three stations (Ecologia, Santa Cruz and Xerém) that are located in vegetated regions. The arithmetic mean of temperature from the three rural stations is taken to represent the rural station temperature. The UHII is determined from these homogeneous groups. The first UHII is estimated from urban and rural temperature areas (Case 1), whilst the second UHII is obtained from suburban and rural temperature areas (Case 2). In Case 1, the maximum UHII occurs in two periods, one in the early morning and the other at night, while the minimum UHII occurs in the afternoon. In Case 2, the maximum UHII is observed during afternoon/night and the minimum during dawn/early morning. This study demonstrates that the stations choice reflects different UHII patterns, evidencing that distinct behaviors of this phenomenon can be identified.

  4. Satellite Images and Gaussian Parameterization for an Extensive Analysis of Urban Heat Islands in Thailand

    Directory of Open Access Journals (Sweden)

    Chaiyapon Keeratikasikorn

    2018-04-01

    Full Text Available For the first time, an extensive study of the surface urban heat island (SUHI in Thailand’s six major cities is reported, using 728 MODIS (MODerate Resolution Imaging Spectroradiometer images for each city. The SUHI analysis was performed at three timescales—diurnal, seasonal, and multiyear. The diurnal variation is represented by the four MODIS passages (10:00, 14:00, 22:00, and 02:00 local time and the seasonal variation by summer and winter maps, with images covering a 14-year interval (2003–2016. Also, 126 Landsat scenes were processed to classify and map land cover changes for each city. To analyze and compare the SUHI patterns, a least-square Gaussian fitting method has been applied and the corresponding empirical metrics quantified. Such an approach represents, when applicable, an efficient quantitative tool to perform comparisons that a visual inspection of a great number of maps would not allow. Results point out that SUHI does not show significant seasonality differences, while SUHI in the daytime is a more evident phenomenon with respect to nighttime, mainly due to solar forcing and intense human activities and traffic. Across the 14 years, the biggest city, Bangkok, shows the highest SUHI maximum intensities during daytime, with values ranging between 4 °C and 6 °C; during nighttime, the intensities are rather similar for all the six cities, between 1 °C and 2 °C. However, these maximum intensities are not correlated with the urban growth over the years. For each city, the SUHI spatial extension represented by the Gaussian footprint is generally not affected by the urban area sprawl across the years, except for Bangkok and Chiang Mai, whose daytime SUHI footprints show a slight increase over the years. Orientation angle and central location of the fitted surface also provide information on the SUHI layout in relation to the land use of the urban texture.

  5. Retroreflective façades for urban heat island mitigation: Experimental investigation and energy evaluations

    International Nuclear Information System (INIS)

    Rossi, Federico; Castellani, Beatrice; Presciutti, Andrea; Morini, Elena; Filipponi, Mirko; Nicolini, Andrea; Santamouris, Matheos

    2015-01-01

    Highlights: • Retro-reflective (RR) materials are an effective strategy for mitigating UHI. • Optical properties of RR materials are assessed by a new experimental facility. • Angular distribution of reflected radiation is assessed during daytime. • RR component is treated as a diffusely reflected radiation by a reduction factor. • An algorithm evaluates the cooling potential of RR materials in urban canyons. - Abstract: The optimization of optical properties of buildings’ envelope and urban paving represents an important research field for reducing the urban heat island effect. The overheating of a surface exposed to sunlight can be reduced by improving solar reflectance. In this sense, several studies have demonstrated the positive effect of cool materials on UHI mitigation. In addition to traditional cool materials, retroreflective (RR) materials have been recently proposed for this application. The present paper aims at the assessment of angular reflectance of RR films for several inclination angles of solar radiation. To reproduce variation of solar radiation’s inclination during the daytime, an ad hoc experimental setup was designed and used. Characterization of RR materials when hit by solar radiation with different inclinations allows to assess their behaviour on daytime if used as novel urban coatings for mitigation of the UHI phenomenon. Measurement results are used as input for an original algorithm which allows to quantify cooling potential of RR materials in terms of energy reflected and sent beyond the urban canyon. The experimental characterization and energy evaluations showed that RR materials could be effectively applied as coatings on urban paving and building envelope, in order to reduce the circulating energy into the canyon

  6. Comprehensive assessments of measures mitigating heat island phenomena in urban areas; Heat shinku wo riyoshita daikibo reibo system no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Mizuno, T; Yamamoto, S; Yoshikado, H; Kondo, H; Kaneho, N; Saegusa, N; Inaba, A [National Institute for Resources and Environment, Tsukuba (Japan); Inoue, M [New Energy and Industrial Technology Development Organization, Tokyo, (Japan)

    1997-02-01

    This paper describes the assessment method of measures mitigating heat island phenomena in urban areas. The heat island phenomena were classified into meso-scale with 100 km-scale, block-scale with several km-scale, and building-scale with 100 m-scale. Urban thermal environment simulation model was developed in response to each scale. For the development, regional data using aircraft and artificial satellite observations, surface observation and thermal environment observation at Shinjuku new central city of Tokyo, and artificial waste heat actual survey data in the southern Kanto district were utilized. Results of the urban thermal environment simulation were introduced as an application of this model. Temperature distributions of the heat island in the Kanto district were simulated with considering urban conditions near Tokyo and without considering it. Daily changes of wall surfaces of high buildings and road surface were calculated. Increase in the air temperature in the back stream of building roofs with increased temperature was determined. 4 figs.

  7. Physical model of the dispersion of a radioactive contaminant in the atmosphere above a heat island

    International Nuclear Information System (INIS)

    Toly, J.A.; Tenchine, D.

    1984-01-01

    The project deals with the impact of surface heating in urban areas on the dispersion of contaminants in the atmosphere. - The atmospheric boundary layer is simulated in a water flume. Ground heating is applied locally reproducing the heat flux of an urban region. Fission products for which internal heat source is neglected are simulated by horizontal plumes at pHs different from the original pH of the flume. - The main results of the study concern: the characterization of the internal boundary layer downstream of the leading edge of the heated ground; the comparison of the concentration distributions of pollutants with and without surface heating. - A transposition of the results, expressed in terms of global parameters, enables information on the heat island effect due to urban regions on the dispersion of contaminants in the atmosphere to be obtained

  8. Exploring the Urban Heat Island (UHI) Effect in Port Louis, Mauritius

    African Journals Online (AJOL)

    2012r

    2014-10-13

    Oct 13, 2014 ... namely: environmental contamination stemming from traffic congestion, the ... problem of UHI may become a more important issue than global warming because the rate of ..... MIGRATION, population distribution and development in the world. ... Urban Heat Island and Climate Change: An Assessment of.

  9. The relation between land-cover and the urban heat island in northeastern Puerto Rico

    Science.gov (United States)

    David J.R. Murphy; Myrna Hall; Charles Hall; Gordon Heisler; Steve Stehman

    2007-01-01

    As development continues in Puerto Rico, forests and grasslands are being converted to impervious cover, changing the magnitude and geographic range of the Urban Heat Island (UHI). As part of the U.S. National Science Foundation Long Term Ecological Research Program, this study aims to quantify the various meteorological effects that urbanization may be imparting on...

  10. A global analysis of the urban heat island effect based on multisensor satellite data

    Science.gov (United States)

    Xiao, J.; Frolking, S. E.; Milliman, T. E.; Schneider, A.; Friedl, M. A.

    2017-12-01

    Human population is rapidly urbanizing. In much of the world, cities are prone to hotter weather than surrounding rural areas - so-called `urban heat islands' - and this effect can have mortal consequences during heat waves. During the daytime, when the surface energy balance is driven by incoming solar radiation, the magnitude of urban warming is strongly influenced by surface albedo and the capacity to evaporate water (i.e., there is a strong relationship between vegetated land fraction and the ratio of sensible to latent heat loss or Bowen ratio). At nighttime, urban cooling is often inhibited by the thermal inertia of the built environment and anthropogenic heat exhaust from building and transportation energy use. We evaluated a suite of global remote sensing data sets representing a range of urban characteristics against MODIS-derived land-surface temperature differences between urban and surrounding rural areas. We included two new urban datasets in this analysis - MODIS-derived change in global urban extent and global urban microwave backscatter - along with several MODIS standard products and DMSP/OLS nighttime lights time series data. The global analysis spanned a range of urban characteristics that likely influence the magnitude of daytime and/or nighttime urban heat islands - urban size, population density, building density, state of development, impervious fraction, eco-climatic setting. Specifically, we developed new satellite datasets and synthesizing these with existing satellite data into a global database of urban land surface parameters, used two MODIS land surface temperature products to generate time series of daytime and nighttime urban heat island effects for 30 large cities across the globe, and empirically analyzed these data to determine specifically which remote sensing-based characterizations of global urban areas have explanatory power with regard to both daytime and nighttime urban heat islands.

  11. The use of remotely sensed data as a tool in urban heat island investigations: An overview

    Energy Technology Data Exchange (ETDEWEB)

    Orvis, K.H.; Akbari, H. [Lawrence Berkeley Lab., CA (United States). Energy and Environment Div.

    1992-01-01

    Remotely sensed data contribute an important tool to areawide, cost-effective studies of urban heat island phenomena. This paper provides an overview of its use dating from the first satellite thermal images of urban heat signatures in the early 1970`s, and briefly examines the range of previous uses of remotely sensed data in urban studies, including identification and analysis of heat island effects, modeling of energy budgets, attempts to analyze and classify the urban landscape, and temporal analyses. The intent is not to provide an exhaustive review but rather to describe research trends and patterns. In addition the paper lists an compares those sensing devices that have seen significant use in urban studies and briefly discusses potential strengths and weaknesses of remotely sensed data for use in urban analyses. Three annotated bibliographies, divided by subject, are included. 95 refs.

  12. Monitoring the effects of land use/landcover changes on urban heat island

    Science.gov (United States)

    Gee, Ong K.; Sarker, Md Latifur Rahman

    2013-10-01

    Urban heat island effects are well known nowadays and observed in cities throughout the World. The main reason behind the effects of urban heat island (UHI) is the transformation of land use/ land cover, and this transformation is associated with UHI through different actions: i) removal of vegetated areas, ii) land reclamation from sea/river, iii) construction of new building as well as other concrete structures, and iv) industrial and domestic activity. In rapidly developing cities, urban heat island effects increases very hastily with the transformation of vegetated/ other types of areas into urban surface because of the increasing population as well as for economical activities. In this research the effect of land use/ land cover on urban heat island was investigated in two growing cities in Asia i.e. Singapore and Johor Bahru, (Malaysia) using 10 years data (from 1997 to 2010) from Landsat TM/ETM+. Multispectral visible band along with indices such as Normalized Difference Vegetation Index (NDVI), Normalized Difference Build Index (NDBI), and Normalized Difference Bareness Index (NDBaI) were used for the classification of major land use/land cover types using Maximum Likelihood Classifiers. On the other hand, land surface temperature (LST) was estimated from thermal image using Land Surface Temperature algorithm. Emissivity correction was applied to the LST map using the emissivity values from the major land use/ land cover types, and validation of the UHI map was carried out using in situ data. Results of this research indicate that there is a strong relationship between the land use/land cover changes and UHI. Over this 10 years period, significant percentage of non-urban surface was decreased but urban heat surface was increased because of the rapid urbanization. With the increase of UHI effect it is expected that local urban climate has been modified and some heat related health problem has been exposed, so appropriate measure should be taken in order to

  13. A Numerical Study on Impact of Taiwan Island Surface Heat Flux on Super Typhoon Haitang (2005

    Directory of Open Access Journals (Sweden)

    Hongxiong Xu

    2015-01-01

    Full Text Available Three to four tropical cyclones (TCs by average usually impact Taiwan every year. This study, using the Developmental Tested Center (DTC version of the Hurricane WRF (HWRF model, examines the effects of Taiwan’s island surface heat fluxes on typhoon structure, intensity, track, and its rainfall over the island. The numerical simulation successfully reproduced the structure and intensity of super Typhoon Haitang. The model, especially, reproduced the looped path and landfall at nearly the right position. Sensitive experiments indicated that Taiwan’s surface heat fluxes have significant influence on the super Typhoon Haitang. Compared to sensible heat (SH fluxes, latent heat (LH is the dominant factor affecting the intensity and rainfall, but they showed opposite effects on intensity and rainfall. LH (SH flux of Taiwan Island intensified (weakened Typhoon Haitang’s intensity and structure by transferring more energy from (to surface. However, only LH played a major role in the looped path before the landfall of the Typhoon Haitang.

  14. The urban heat island effect, its causes, and mitigation, with reference to the thermal properties of asphalt concrete.

    Science.gov (United States)

    Mohajerani, Abbas; Bakaric, Jason; Jeffrey-Bailey, Tristan

    2017-07-15

    The Urban Heat Island (UHI) is a phenomenon that affects many millions of people worldwide. The higher temperatures experienced in urban areas compared to the surrounding countryside has enormous consequences for the health and wellbeing of people living in cities. The increased use of manmade materials and increased anthropogenic heat production are the main causes of the UHI. This has led to the understanding that increased urbanisation is the primary cause of the urban heat island. The UHI effect also leads to increased energy needs that further contribute to the heating of our urban landscape, and the associated environmental and public health consequences. Pavements and roofs dominate the urban surface exposed to solar irradiation. This review article outlines the contribution that pavements make to the UHI effect and analyses localized and citywide mitigation strategies against the UHI. Asphalt Concrete (AC) is one of the most common pavement surfacing materials and is a significant contributor to the UHI. Densely graded AC has low albedo and high volumetric heat capacity, which results in surface temperatures reaching upwards of 60 °C on hot summer days. Cooling the surface of a pavement by utilizing cool pavements has been a consistent theme in recent literature. Cool pavements can be reflective or evaporative. However, the urban geometry and local atmospheric conditions should dictate whether or not these mitigation strategies should be used. Otherwise both of these pavements can actually increase the UHI effect. Increasing the prevalence of green spaces through the installation of street trees, city parks and rooftop gardens has consistently demonstrated a reduction in the UHI effect. Green spaces also increase the cooling effect derived from water and wind sources. This literature review demonstrates that UHI mitigation techniques are best used in combination with each other. As a result of the study, it was concluded that the current mitigation

  15. An energy and mortality impact assessment of the urban heat island in the US

    International Nuclear Information System (INIS)

    Lowe, Scott A.

    2016-01-01

    Increased summer energy use and increased summer heat related mortality are the two most cited detrimental impacts of the urban heat island (UHI). An assessment of these impacts was made that considered the annual impact of the UHI, not just the summer impact. It was found that in north of the US there was a net decrease in energy use from the UHI, as heating energy reductions were larger than the increase in cooling energy. In the south there was a net energy increase from the UHI. The impact of the UHI on heat related deaths was an estimated increase of 1.1 deaths per million people. The impact of the UHI on cold related deaths was an estimated decrease of 4.0 deaths per million people. These estimates are caveated by the acknowledgement that compounding factors influence mortality. Hypothermia related death rates were three times higher in rural areas than urban areas. This is surprising as the homeless population is usually considered the most at risk, yet they mostly live in urban areas. - Highlights: • The urban heat island (UHI) may actually be beneficial in colder cities in the US in terms of energy use • The UHI may cause an increase in heat related mortality of ~ 1 deaths per million • In winter the UHI may decrease cold related mortality by ~ 4 deaths per million • Cold related death rates were 3 times higher in rural areas although the homeless population live mainly in urban areas

  16. An energy and mortality impact assessment of the urban heat island in the US

    Energy Technology Data Exchange (ETDEWEB)

    Lowe, Scott A., E-mail: Scott.lowe@manhattan.edu

    2016-01-15

    Increased summer energy use and increased summer heat related mortality are the two most cited detrimental impacts of the urban heat island (UHI). An assessment of these impacts was made that considered the annual impact of the UHI, not just the summer impact. It was found that in north of the US there was a net decrease in energy use from the UHI, as heating energy reductions were larger than the increase in cooling energy. In the south there was a net energy increase from the UHI. The impact of the UHI on heat related deaths was an estimated increase of 1.1 deaths per million people. The impact of the UHI on cold related deaths was an estimated decrease of 4.0 deaths per million people. These estimates are caveated by the acknowledgement that compounding factors influence mortality. Hypothermia related death rates were three times higher in rural areas than urban areas. This is surprising as the homeless population is usually considered the most at risk, yet they mostly live in urban areas. - Highlights: • The urban heat island (UHI) may actually be beneficial in colder cities in the US in terms of energy use • The UHI may cause an increase in heat related mortality of ~ 1 deaths per million • In winter the UHI may decrease cold related mortality by ~ 4 deaths per million • Cold related death rates were 3 times higher in rural areas although the homeless population live mainly in urban areas.

  17. The Urban Tree as a Tool to Mitigate the Urban Heat Island in Mexico City: A Simple Phenomenological Model.

    Science.gov (United States)

    Ballinas, Mónica; Barradas, Víctor L

    2016-01-01

    The urban heat island (UHI) is mainly a nocturnal phenomenon, but it also appears during the day in Mexico City. The UHI may affect human thermal comfort, which can influence human productivity and morbidity in the spring/summer period. A simple phenomenological model based on the energy balance was developed to generate theoretical support of UHI mitigation in Mexico City focused on the latent heat flux change by increasing tree coverage to reduce sensible heat flux and air temperature. Half-hourly data of the urban energy balance components were generated in a typical residential/commercial neighborhood of Mexico City and then parameterized using easily measured variables (air temperature, humidity, pressure, and visibility). Canopy conductance was estimated every hour in four tree species, and transpiration was estimated using sap flow technique and parameterized by the envelope function method. Averaged values of net radiation, energy storage, and sensible and latent heat flux were around 449, 224, 153, and 72 W m, respectively. Daily tree transpiration ranged from 3.64 to 4.35 Ld. To reduce air temperature by 1°C in the studied area, 63 large would be required per hectare, whereas to reduce the air temperature by 2°C only 24 large trees would be required. This study suggests increasing tree canopy cover in the city cannot mitigate UHI adequately but requires choosing the most appropriate tree species to solve this problem. It is imperative to include these types of studies in tree selection and urban development planning to adequately mitigate UHI. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  18. Linking potential heat source and sink to urban heat island: Heterogeneous effects of landscape pattern on land surface temperature.

    Science.gov (United States)

    Li, Weifeng; Cao, Qiwen; Lang, Kun; Wu, Jiansheng

    2017-05-15

    Rapid urbanization has significantly contributed to the development of urban heat island (UHI). Regulating landscape composition and configuration would help mitigate the UHI in megacities. Taking Shenzhen, China, as a case study area, we defined heat source and heat sink and identified strong and weak sources as well as strong and weak sinks according to the natural and socioeconomic factors influencing land surface temperature (LST). Thus, the potential thermal contributions of heat source and heat sink patches were differentiated. Then, the heterogeneous effects of landscape pattern on LST were examined by using semiparametric geographically weighted regression (SGWR) models. The results showed that landscape composition has more significant effects on thermal environment than configuration. For a strong source, the percentage of patches has a positive impact on LST. Additionally, when mosaicked with some heat sink, even a small improvement in the degree of dispersion of a strong source helps to alleviate UHI. For a weak source, the percentage and density of patches have positive impacts on LST. For a strong sink, the percentage, density, and degree of aggregation of patches have negative impacts on LST. The effects of edge density and patch shape complexity vary spatially with the fragmentation of a strong sink. Similarly, the impacts of a weak sink are mainly exerted via the characteristics of percent, density, and shape complexity of patches. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Use of GLOBE Observations to Derive a Landsat 8 Split Window Algorithm for Urban Heat Island

    Science.gov (United States)

    Fagerstrom, L.; Czajkowski, K. P.

    2017-12-01

    Surface temperature has been studied to investigate the warming of urban climates, also known as urban heat islands, which can impact urban planning, public health, pollution levels, and energy consumption. However, the full potential of remotely sensed images is limited when analyzing land surface temperature due to the daunting task of correcting for atmospheric effects. Landsat 8 has two thermal infrared sensors. With two bands in the infrared region, a split window algorithm (SWA), can be applied to correct for atmospheric effects. This project used in situ surface temperature measurements from NASA's ground observation program, the Global Learning and Observations to Benefit the Environment (GLOBE), to derive the correcting coefficients for use in the SWA. The GLOBE database provided land surface temperature data that coincided with Landsat 8 overpasses. The land surface temperature derived from Landsat 8 SWA can be used to analyze for urban heat island effect.

  20. Monitoring Spatiotemporal Changes of Heat Island in Babol City due to Land Use Changes

    Science.gov (United States)

    Alavi Panah, S. K.; Kiavarz Mogaddam, M.; Karimi Firozjaei, M.

    2017-09-01

    Urban heat island is one of the most vital environmental risks in urban areas. The advent of remote sensing technology provides better visibility due to the integrated view, low-cost, fast and effective way to study and monitor environmental and humanistic changes. The aim of this study is a spatiotemporal evaluation of land use changes and the heat island in the time period of 1985-2015 for the studied area in the city of Babol. For this purpose, multi-temporal Landsat images were used in this study. For calculating the land surface temperature (LST), single-channel and maximum likelihood algorithms were used, to classify Images. Therefore, land use changes and LST were examined, and thereby the relationship between land-use changes was analyzed with the normalized LST. By using the average and standard deviation of normalized thermal images, the area was divided into five temperature categories, inter alia, very low, low, medium, high and very high and then, the heat island changes in the studied time period were investigated. The results indicate that land use changes for built-up lands increased by 92%, and a noticeable decrease was observed for agricultural lands. The Built-up land changes trend has direct relation with the trend of normalized surface temperature changes. Low and very low-temperature categories which follow a decreasing trend, are related to lands far away from the city. Also, high and very high-temperature categories whose areas increase annually, are adjacent to the city center and exit ways of the town. The results emphasize on the importance of attention of urban planners and managers to the urban heat island as an environmental risk.

  1. MONITORING SPATIOTEMPORAL CHANGES OF HEAT ISLAND IN BABOL CITY DUE TO LAND USE CHANGES

    Directory of Open Access Journals (Sweden)

    S. K. Alavi Panah

    2017-09-01

    Full Text Available Urban heat island is one of the most vital environmental risks in urban areas. The advent of remote sensing technology provides better visibility due to the integrated view, low-cost, fast and effective way to study and monitor environmental and humanistic changes. The aim of this study is a spatiotemporal evaluation of land use changes and the heat island in the time period of 1985-2015 for the studied area in the city of Babol. For this purpose, multi-temporal Landsat images were used in this study. For calculating the land surface temperature (LST, single-channel and maximum likelihood algorithms were used, to classify Images. Therefore, land use changes and LST were examined, and thereby the relationship between land-use changes was analyzed with the normalized LST. By using the average and standard deviation of normalized thermal images, the area was divided into five temperature categories, inter alia, very low, low, medium, high and very high and then, the heat island changes in the studied time period were investigated. The results indicate that land use changes for built-up lands increased by 92%, and a noticeable decrease was observed for agricultural lands. The Built-up land changes trend has direct relation with the trend of normalized surface temperature changes. Low and very low-temperature categories which follow a decreasing trend, are related to lands far away from the city. Also, high and very high-temperature categories whose areas increase annually, are adjacent to the city center and exit ways of the town. The results emphasize on the importance of attention of urban planners and managers to the urban heat island as an environmental risk.

  2. Existing climate data sources and Their Use in Heat IslandResearch

    Energy Technology Data Exchange (ETDEWEB)

    Akbari, Hashem; Pon, Brian; Smith, Craig Kenton; Stamper-Kurn, Dan Moses

    1998-10-01

    Existing climate data sources can be used in two general types of analysis for the detection of urban heat islands. Historical analyses use long-term data records-preferentially from several locations in and around an urban area-to trace the gradual influence of urban development on its climate. Primary sources of such data include the cooperative network, first-order National Weather Service stations, and military weather stations. Analyses of short-term data use information from a dense urban weather station network to discern the location, extent, and magnitude of urban heat islands. Such analyses may use the aforementioned national networks or regional networks such as agricultural, air quality monitoring, or utility networks. We demonstrate the use of existing data sources with a historical analysis of temperature trends in Los Angeles, California, and an analysis of short-term data of the urban temperature profile for Phoenix, Arizona. The Los Angeles climate was examined with eleven long-term data records from the cooperative network. Statistically significant trends of rising temperature were detected at Los Angeles Civic Center and other stations over some parts of the year, although timing of the increase varied from station to station. Observed increases in temperatures maybe due to long-term climate changes, microclimate influences, or local-scale heat islands. The analysis of short-term data was made for Phoenix using the PRISMS station network. Mean diurnal temperature profiles for a month were examined and compared with those for adjacent rural areas. Data fi-om stations in the center of Phoenix showed clear and significant nighttime and daytime temperature differences of 1- 2K (3 - 4"F). These temperature increases maybe attributable to a local-scale heat island.

  3. Shallow geothermal field in Lanzarote (Canary Island). Potential evaluation and heat extraction test

    Energy Technology Data Exchange (ETDEWEB)

    Diez-Gil, J.L.; Valentin, A. [Consejo Superior de Investigaciones Cientificas, Madrid (Spain); Torres, F. [Universidad de Barcelona (Spain); Albert, J.F.

    1994-12-31

    Boreholes were used to perform various experiments. A thermometry was carried out, as well as chemical analysis and an hydrodynamic modelling. This paper presents the scientific aims and conclusions of the whole project called ``Shallow H.D.R. geothermal field`` in Lanzarote (Canary Islands). Potential evaluation and heat extraction test are presented. (Project JOUG-0004 ES -JR - JOULE Program of the EEC). (TEC). 2 tabs.

  4. Urban Heat Island and Park Cool Island Intensities in the Coastal City of Aracaju, North-Eastern Brazil

    Directory of Open Access Journals (Sweden)

    Max Anjos

    2017-08-01

    Full Text Available In this study, an evaluation of the Urban Heat Island (UHI and Park Cool Island (PCI intensities in Aracaju, North-Eastern Brazil, was performed. The basis of our evaluation is a 2-year dataset from the urban climatological network installed with the principles and concepts defined for urban areas related to climatic scales, sitting and exposure, urban morphology, and metadata. The current findings update UHI intensities in Aracaju refuting the trend registered in previous studies. On average, the UHI was more intense in the cool season (1.3 °C than in hot season (0.5 °C, which was caused by wind speed decrease. In relation to the PCI, mitigation of high air temperatures of 1.5–2 °C on average was registered in the city. However, the urban park is not always cooler than the surrounding built environment. Consistent long-term monitoring in the cities is very important to provide more accurate climatic information about the UHI and PCI to be applied in urban planning properly, e.g., to provide pleasant thermal comfort in urban spaces.

  5. Temperature and heat flow measurements in a fumarolic area: Vulcano Island (Italy)

    Energy Technology Data Exchange (ETDEWEB)

    Guern, F.L. (Centre des Faibles Radioactivites C.N.R.S., Gifsur Yvette, France); Carbonnelle, J.; D' Amore, F.

    1980-01-01

    Vulcano, the southern Aeolian Island, is in fumarolic activity. The possibilities of measurements are limited by the field conditions as well as by the technological feasibility. In the present work different tests were made in the field to measure temperature continuously: only the measurements made in dry steam gave good results because they avoid corrosion, and solution of the acid gases in the condensed steam in the ground. Field measurements show that the heat transfer is mainly due to convection. The values obtained in the field can be used to quantify the remote sensing of heat transfer.

  6. The correlation of urban heat island in tropical middle-class housing

    Science.gov (United States)

    Wazir, Zuber Angkasa

    2017-11-01

    A very limited number of green and sustainable construction studies have explored factors related to Urban Heat Island (UHI) in tropical middle-class housing. This paper aimed to investigate the correlation of Urban Heat Island in tropical middle-class housing in three urban housing for middle-class residents of Palembang, which were Taman Sari Kenten, TOP Jakabaring, and Talang Kelapa. Samples consisted of 125 Taman Sari Kenten housing, 27 Talang Kelapa housing, and 12 TOP Jakabaring housing. Independent variables were the resident density, socioeconomic status, house location, roof type, green area ratio, weather, time, air conditioner, pro-environment institution, and NEP scale. The Analytic method included correlation and regression. We identified that all housing had different UHI profiles where Taman Sari Kenten had the highest UHI (4.17 K), followed by Talang Kelapa (2.66 K) and TOP Jakabaring (0.66 K) against temperature in measuring station nearby, owned by BMKG (National Meteorological Station). UHI correlated with the resident density, roof type, green area ratio, weather, time, and air conditioner. The results should add to the design of ideal housing in the tropical climate for middle-class residents, focusing on its ability to mitigate Urban Heat Island.

  7. Comparative and Combinative Study of Urban Heat island in Wuhan City with Remote Sensing and CFD Simulation

    Directory of Open Access Journals (Sweden)

    Zhuang Yu

    2008-10-01

    Full Text Available Urban heat islands are one of the most critical urban environment heat problems. Landsat ETM+ satellite data were used to investigate the land surface temperature and underlying surface indices such as NDVI and NDBI. A comparative study of the urban heat environment at different scales, times and locations was done to verify the heat island characteristics. Since remote sensing technology has limitations for dynamic flow analysis in the study of urban spaces, a CFD simulation was used to validate the improvement of the heat environment in a city by means of wind. CFD technology has its own shortcomings in parameter setting and verification, while RS technology is helpful to remedy this. The city of Wuhan and its climatological condition of being hot in summer and cold in winter were chosen to verify the comparative and combinative application of RS with CFD in studying the urban heat island.

  8. Analytical approach for evaluating temperature field of thermal modified asphalt pavement and urban heat island effect

    International Nuclear Information System (INIS)

    Chen, Jiaqi; Wang, Hao; Zhu, Hongzhou

    2017-01-01

    Highlights: • Derive an analytical approach to predict temperature fields of multi-layered asphalt pavement based on Green’s function. • Analyze the effects of thermal modifications on heat output from pavement to near-surface environment. • Evaluate pavement solutions for reducing urban heat island (UHI) effect. - Abstract: This paper aims to present an analytical approach to predict temperature fields in asphalt pavement and evaluate the effects of thermal modification on near-surface environment for urban heat island (UHI) effect. The analytical solution of temperature fields in the multi-layered pavement structure was derived with the Green’s function method, using climatic factors including solar radiation, wind velocity, and air temperature as input parameters. The temperature solutions were validated with an outdoor field experiment. By using the proposed analytical solution, temperature fields in the pavement with different pavement surface albedo, thermal conductivity, and layer combinations were analyzed. Heat output from pavement surface to the near-surface environment was studied as an indicator of pavement contribution to UHI effect. The analysis results show that increasing pavement surface albedo could decrease pavement temperature at various depths, and increase heat output intensity in the daytime but decrease heat output intensity in the nighttime. Using reflective pavement to mitigate UHI may be effective for an open street but become ineffective for the street surrounded by high buildings. On the other hand, high-conductivity pavement could alleviate the UHI effect in the daytime for both the open street and the street surrounded by high buildings. Among different combinations of thermal-modified asphalt mixtures, the layer combination of high-conductivity surface course and base course could reduce the maximum heat output intensity and alleviate the UHI effect most.

  9. The other side of the coin: urban heat islands as shields from extreme cold

    Science.gov (United States)

    Yang, J.; Bou-Zeid, E.

    2017-12-01

    Extensive studies focusing on urban heat islands (UHIs) during hot periods create a perception that UHIs are invariably hazardous to human health and the sustainability of cities. Consequently, cities have invested substantial resources to try to mitigate UHIs. These urban policies can have serious repercussions since the health risks associated with cold weather are in fact higher than for heat episodes, yet wintertime UHIs have hardly been explored. We combine ground observations from 12 U.S. cities and high-resolution simulations to show that UHIs not only warm urban areas in the winter, but also further intensify during cold waves by up to 1.32 ± 0.78 oC (mean ± standard deviation) at night. Urban heat islands serve as shelters against extreme colds and provide invaluable benefits of reducing health risks and heating demand. More importantly, our simulations indicate that standard UHI mitigation measures such as green or cool roofs reduce these cold time amenities to different extents. Cities, particularly in cool and cold temperate climates, should hence revisit policies and efforts that are only desgined for hot periods. A paradigm shift is urgently needed to give an equal weight to the wintertime benefits of UHIs in the sustainability and resilience blueprints of cities.

  10. Heatwaves and urban heat islands: A comparative analysis of multiple cities

    Science.gov (United States)

    Ramamurthy, P.; Bou-Zeid, E.

    2017-01-01

    The recent International Panel on Climate Change report predicts the highly urbanized Northeastern U.S. to be at high risk to heat waves. Since urban residents and infrastructure are known to be highly vulnerable to extreme heat, the goal of this paper is to understand the interaction between the synoptic-scale heat wave and the city-scale urban heat island (UHI) effects. The study also qualitatively analyzes the primary factors that contribute to UHIs by comparing their intensities in different cities with distinct geo-physical characteristics. Our results, generated by using the Weather Research and Forecasting model augmented with advanced urban surface parameterizations, confirm that the amplitude of UHI is related to the physical size of the city. However, the results suggest that cities of comparabale sizes might interact differently with heat waves: in New York City; Washington, DC; and Baltimore (but not in Philadelphia) the regular UHI was amplified more strongly during heat waves compared to smaller cities. The results also establish that the pattern of UHI in different cities, its variability, and its interaction with heat waves are inherently linked to dynamic factors.

  11. What land covers are effective in mitigating a heat island in urban building rooftop?

    Science.gov (United States)

    Lee, S.; Ryu, Y.

    2014-12-01

    Since the 20th century, due to the rapid urbanization many urban environment problems have got blossomed and above all heat island has been recognized as an important issue. There are several causes of urban heat island, but land cover change occupies the largest portion of them. Owing to urban expansion, vegetation is changed into asphalt pavements and concrete buildings, which reduces latent heat flux. To mitigate the problems, people enlarge vegetation covers such as planting street trees, making rooftop gardens and constructing parks or install white roofs that feature high albedo on a building. While the white roofs reflect about 70% of solar radiation and absorb less radiation, vegetation has low albedo but cools the air through transpiration and fixes carbon dioxide through photosynthesis. There are some studies concerning which one is more effective to mitigate heat island between the green roof and white roof. This study compares the green roof and white roof and additionally considers carbon fixation that has not been treated in other studies. Furthermore, this study ascertains an efficiency of solar-cell panel that is used for building roof recently. The panel produces electric power but has low albedo which could warm the air. The experiment is conducted at the rooftop in Seoul, Korea and compares green roof (grass), white roof (painted cover), black roof (solar panel) and normal painted roof. Surface temperature and albedo are observed for the four roof types and incoming shortwave, outgoing longwave and carbon flux are measured in green roof solely. In the case of solar panels, the electricity generation is calculated from the incoming radiation. We compute global warming potentials for the four roof types and test which roof type is most effective in reducing global warming potential.

  12. An Urban Heat Island Study of the Colombo Metropolitan Area, Sri Lanka, Based on Landsat Data (1997–2017

    Directory of Open Access Journals (Sweden)

    Manjula Ranagalage

    2017-06-01

    Full Text Available One of the major impacts associated with unplanned rapid urban growth is the decrease of urban vegetation, which is often replaced with impervious surfaces such as buildings, parking lots, roads, and pavements. Consequently, as the percentage of impervious surfaces continues to increase at the expense of vegetation cover, surface urban heat island (SUHI forms and becomes more intense. The Colombo Metropolitan Area (CMA, Sri Lanka, is one of the rapidly urbanizing metropolitan regions in South Asia. In this study, we examined the spatiotemporal variations of land surface temperature (LST in the CMA in the context of the SUHI phenomenon using Landsat data. More specifically, we examined the relationship of LST with the normalized difference vegetation index (NDVI and the normalized difference built-up index (NDBI at three time points (1997, 2007 and 2017. In addition, we also identified environmentally critical areas based on LST and NDVI. We found significant correlations of LST with NDVI (negative and NDBI (positive (p < 0.001 across all three time points. Most of the environmentally critical areas are located in the central business district (CBD, near the harbor, across the coastal belt, and along the main transportation network. We recommend that those identified environmentally critical areas be considered in the future urban planning and landscape development of the city. Green spaces can help improve the environmental sustainability of the CMA.

  13. Effect of Land-Use Change on the Urban Heat Island in the Fukuoka–Kitakyushu Metropolitan Area, Japan

    Directory of Open Access Journals (Sweden)

    Yoichi Kawamoto

    2017-08-01

    Full Text Available In coastal cities, the effect of the sea breeze in mitigating the urban heat island (UHI phenomenon has attracted attention. This study targeted the Fukuoka–Kitakyushu metropolitan area, the fourth largest metropolitan area in Japan which is also coastal. Doppler Light Detection And Ranging (LiDAR observations were conducted in the summer of 2015 to clarify the transition of the wind field over the targeted area. To investigate the effects on the UHI of land-use change related to urbanization, the National Land Numerical Information (NLNI land-use datasets for Japan in 1976 (NLNI-76 and 2009 (NLNI-09 were used in the Weather Research and Forecasting (WRF model. The results of the simulation showed that most of the northern part of the Kyushu region became warmer, with an average increase of +0.236 °C for the whole simulation period. Comparing the two simulations and the Doppler LiDAR observations, the simulation results with the NLNI-09 dataset (for the year closest to the study period in 2015 showed closer conformity with the observations. The results of the simulation using NLNI-76 showed faster sea breeze penetration and higher wind velocity than the observations. These results suggest that the land-use change related to urbanization weakened the sea breeze penetration in this area.

  14. Assessing population movement impacts on urban heat island of Beijing during the Chinese New Year holiday: effects of meteorological conditions

    Science.gov (United States)

    Wu, Lingyun; Zhang, Jingyong

    2018-02-01

    Chinese New Year (CNY), or Spring Festival, is the most important of all festivals in China. We use daily observations to show that Beijing's urban heat island (UHI) effects largely depend on precipitation, cloud cover, and water vapor but are insensitive to wind speed, during the CNY holiday season. Non-precipitating, clear, and low humidity conditions favor strong UHI effects. The CNY holiday, with some 3 billion journeys made, provides a living laboratory to explore the role of population movements in the UHI phenomenon. Averaged over the period 2004-2013, with the Olympic year of 2008 excluded, Beijing's UHI effects during the CNY week decline by 0.48 °C relative to the background period (4 weeks including 2 to 3 weeks before, and 2 to 3 weeks after, the CNY week). With combined effects of precipitation, large cloud cover, and high water vapor excluded, the UHI effects during the CNY week averaged over the study period decline by 0.76 °C relative to the background period, significant at the 99% confidence level by Student's t test. These results indicate that the impacts of population movements can be more easily detected when excluding unfavorable meteorological conditions to the UHI. Population movements occur not only during the CNY holiday, but also during all the time across the globe. We suggest that better understanding the role of population movements will offer new insight into anthropogenic climate modifications.

  15. Heat island and spatio-temporal changes of temperature in the city of Bogota

    International Nuclear Information System (INIS)

    Angel, L; Ramirez, A; Dominguez, E.

    2010-01-01

    The planet Earth, as a whole, has experienced a warming process caused principally by the accumulation of atmospheric greenhouse gases. Otherwise, it has been well demonstrated that thermic islands exist inside of cities, essentially as a result of the replacement of forest areas with urban materials such as asphalt, concrete, bricks, etc. Based on this foundation, this research evaluated the minimum, median and maximum temperature changes that occurred in the city of Bogota over the last 40 years. This research makes evident the presence of a heat island 3o Cover the periphery median temperature in most of the city. There were also periods with increases and decreases in city temperatures, not affected in its main tendency by the Nino Phenomena which in contrast affected the periphery.

  16. Raynaud's phenomenon

    DEFF Research Database (Denmark)

    Nielsen, S L; Christensen, N J; Olsen, N

    1980-01-01

    . The forearm venous concentration of noradrenaline was lower and adrenaline concentration higher in the sympathectomized patients than in the other groups (p less than 0,05). Noradrenaline showed a significant increase during body cooling in normals and primary Raynaud's (p less than 0......The reaction to body and finger cooling was recorded in seven patients with relapse of primary Raynaud's phenomenon after sufficiently performed bilateral upper thoracic sympathectomy and for comparison in eight young women with primary Raynaud's phenomenon as well as in seven normal women......,05). There was no significant correlation between the vasoconstrictor response to cooling of a finger and the noradrenaline concentration probably due to the fact that skin vasoconstriction impeded release of noradrenaline from the skin. The relapse of Raynaud's phenomenon after surgically sufficient sympathectomy could...

  17. Exploring the Cattaneo-Christov heat flux phenomenon on a Maxwell-type nanofluid coexisting with homogeneous/heterogeneous reactions

    Science.gov (United States)

    Sarkar, Amit; Kundu, Prabir Kumar

    2017-12-01

    This specific article unfolds the efficacy of Cattaneo-Christov heat flux on the heat and mass transport of Maxwell nanofluid flow over a stretched sheet with changeable thickness. Homogeneous/heterogeneous reactions in the fluid are additionally considered. The Cattaneo-Christov heat flux model is initiated in the energy equation. Appropriate similarity transformations are taken up to form a system of nonlinear ODEs. The impact of related parameters on the nanoparticle concentration and temperature is inspected through tables and diagrams. It is renowned that temperature distribution increases for lower values of the thermal relaxation parameter. The rate of mass transfer is enhanced for increasing in the heterogeneous reaction parameter but the reverse tendency is ensued for the homogeneous reaction parameter. On the other side, the rate of heat transfer is getting enhanced for the Cattaneo-Christov model compared to the classical Fourier's model for some flow factors. Thus the implication of the current study is to delve its unique effort towards the generalized version of traditional Fourier's law at nano level.

  18. a Temporal and Spatial Analysis of Urban Heat Island in Basin City Utilizing Remote Sensing Techniques

    Science.gov (United States)

    Chang, Hsiao-Tung

    2016-06-01

    Urban Heat Island (UHI) has been becoming a key factor in deteriorating the urban ecological environment. Spatial-temporal analysis on its prototype of basin city's UHI and quantitatively evaluating effect from rapid urbanization will provide theoretical foundation for relieving UHI effect. Based on Landsat 8, ETM+ and TM images of Taipei basin areas from 1900 to 2015, this article has retrieved the land surface temperature (LST) at summer solstice of each year, and then analysed spatial-temporal pattern and evolution characters of UHI in Taipei basin in this decade. The results showed that the expansion built district, UHI area constantly expanded from centre city to the suburb areas. The prototype of UHI in Taipei basin that showed in addition to higher temperatures in the centre city also were relatively high temperatures gathered boundaries surrounded by foot of mountains side. It calls "sinking heat island". From 1900 to 2000, the higher UHI areas were different land use type change had obvious difference by public infrastructure works. And then, in next 15 years till 2015, building density of urban area has been increasing gradually. It has the trend that UHI flooding raises follow urban land use density. Hot spot of UHI in Taipei basin also has the same characteristics. The results suggest that anthropogenic heat release probably plays a significant role in the UHI effect, and must be considered in urban planning adaptation strategies.

  19. Analysis of the ability of water resources to reduce the urban heat island in the Tokyo megalopolis

    Energy Technology Data Exchange (ETDEWEB)

    Nakayama, Tadanobu, E-mail: nakat@nies.go.jp [Asian Environment Research Group, National Institute for Environmental Studies (NIES), 16-2 Onogawa, Tsukuba, Ibaraki 305-8506 (Japan); Process Hydrology Section, Centre for Ecology and Hydrology (CEH), Crowmarsh Gifford, Wallingford, Oxfordshire OX10 8BB (United Kingdom); Hashimoto, Shizuka [Faculty of Agriculture, Kyoto University, Sakyo-ku, Kyoto 606-8502 (Japan)

    2011-08-15

    Simulation procedure integrated with multi-scale in horizontally regional-urban-point levels and in vertically atmosphere-surface-unsaturated-saturated layers, was newly developed in order to predict the effect of urban geometry and anthropogenic exhaustion on the hydrothermal changes in the atmospheric/land and the interfacial areas of the Japanese megalopolis. The simulated results suggested that the latent heat flux in new water-holding pavement (consisting of porous asphalt and water-holding filler made of steel by-products based on silica compound) has a strong impact on hydrologic cycle and cooling temperature in comparison with the observed heat budget. We evaluated the relationship between the effect of groundwater use as a heat sink to tackle the heat island and the effect of infiltration on the water cycle in the urban area. The result indicates that effective management of water resources would be powerful for ameliorating the heat island and recovering sound hydrologic cycle there. - Highlights: > Simulation procedure with multi-scale was newly developed. > Latent heat flux in water-holding pavement had strong impact on hydrothermal changes. > Model predicted effect of urban geometry and anthropogenic exhaustion. > Effective management of water resources is powerful for ameliorating heat island. - This study indicates that effective management of water resources would be powerful for ameliorating the heat island and recovering sound hydrologic cycle in urban area.

  20. Analysis of the ability of water resources to reduce the urban heat island in the Tokyo megalopolis

    International Nuclear Information System (INIS)

    Nakayama, Tadanobu; Hashimoto, Shizuka

    2011-01-01

    Simulation procedure integrated with multi-scale in horizontally regional-urban-point levels and in vertically atmosphere-surface-unsaturated-saturated layers, was newly developed in order to predict the effect of urban geometry and anthropogenic exhaustion on the hydrothermal changes in the atmospheric/land and the interfacial areas of the Japanese megalopolis. The simulated results suggested that the latent heat flux in new water-holding pavement (consisting of porous asphalt and water-holding filler made of steel by-products based on silica compound) has a strong impact on hydrologic cycle and cooling temperature in comparison with the observed heat budget. We evaluated the relationship between the effect of groundwater use as a heat sink to tackle the heat island and the effect of infiltration on the water cycle in the urban area. The result indicates that effective management of water resources would be powerful for ameliorating the heat island and recovering sound hydrologic cycle there. - Highlights: → Simulation procedure with multi-scale was newly developed. → Latent heat flux in water-holding pavement had strong impact on hydrothermal changes. → Model predicted effect of urban geometry and anthropogenic exhaustion. → Effective management of water resources is powerful for ameliorating heat island. - This study indicates that effective management of water resources would be powerful for ameliorating the heat island and recovering sound hydrologic cycle in urban area.

  1. Multiple timescale analysis of the urban heat island effect based on the Community Land Model: a case study of the city of Xi'an, China.

    Science.gov (United States)

    Gao, Meiling; Shen, Huanfeng; Han, Xujun; Li, Huifang; Zhang, Liangpei

    2017-12-06

    Urban heat islands (UHIs) are the phenomenon of urban regions usually being warmer than rural regions, which significantly impacts both the regional ecosystem and societal activities. Numerical simulation can provide spatially and temporally continuous datasets for UHI analysis. In this study, a spatially and temporally continuous ground temperature dataset of Xi'an, China was obtained through numerical simulation based on the Community Land Model version 4.5 (CLM4.5), at a temporal resolution of 30 min and a spatial resolution of 0.05 ∘ × 0.05 ∘ . Based on the ground temperature, the seasonal average UHI intensity (UHII) was calculated and the seasonal variation of the UHI effect was analyzed. The monthly variation tendency of the urban heat stress was also investigated. Based on the diurnal cycle of ground temperature and the UHI effect in each season, the variation tendencies of the maximum, minimum, and average UHII were analyzed. The results show that the urban heat stress in summer is the strongest among all four seasons. The heat stress in urban areas is very significant in July, and the UHII is the weakest in January. Regarding the diurnal cycle of UHII, the maximum always appears at 06:30 UTC to 07:30 UTC, while the minimum intensity of the UHI effect occurs at different times in the different seasons. The results of this study could provide a reference for policymakers about how to reduce the damage caused by heat stress.

  2. [Applicability of traditional landscape metrics in evaluating urban heat island effect].

    Science.gov (United States)

    Chen, Ai-Lian; Sun, Ran-Hao; Chen, Li-Ding

    2012-08-01

    By using 24 landscape metrics, this paper evaluated the urban heat island effect in parts of Beijing downtown area. QuickBird (QB) images were used to extract the landscape type information, and the thermal bands from Landsat Enhanced Thematic Mapper Plus (ETM+) images were used to extract the land surface temperature (LST) in four seasons of the same year. The 24 landscape pattern metrics were calculated at landscape and class levels in a fixed window with 120 mx 120 m in size, with the applicability of these traditional landscape metrics in evaluating the urban heat island effect examined. Among the 24 landscape metrics, only the percentage composition of landscape (PLAND), patch density (PD), largest patch index (LPI), coefficient of Euclidean nearest-neighbor distance variance (ENN_CV), and landscape division index (DIVISION) at landscape level were significantly correlated with the LST in March, May, and November, and the PLAND, LPI, DIVISION, percentage of like adjacencies, and interspersion and juxtaposition index at class level showed significant correlations with the LST in March, May, July, and December, especially in July. Some metrics such as PD, edge density, clumpiness index, patch cohesion index, effective mesh size, splitting index, aggregation index, and normalized landscape shape index showed varying correlations with the LST at different class levels. The traditional landscape metrics could not be appropriate in evaluating the effects of river on LST, while some of the metrics could be useful in characterizing urban LST and analyzing the urban heat island effect, but screening and examining should be made on the metrics.

  3. Urban heat island effect: A systematic review of spatio-temporal factors, data, methods, and mitigation measures

    Science.gov (United States)

    Deilami, Kaveh; Kamruzzaman, Md.; Liu, Yan

    2018-05-01

    Despite research on urban heat island (UHI) effect has increased exponentially over the last few decades, a systematic review of factors contributing to UHI effect has scarcely been reported in the literature. This paper provides a systematic and overarching review of different spatial and temporal factors affecting the UHI effect. UHI is a phenomenon when urban areas experience a higher temperature than their surrounding non-urban areas and is considered as a critical factor contributing to global warming, heat related mortalities, and unpredictable climatic changes. Therefore, there is a pressing need to identify the spatio-temporal factors that contribute to (or mitigate) the UHI effect in order to develop a thorough understanding of their causal mechanism so that these are addressed through urban planning policies. This paper systematically identified 75 eligible studies on UHI effect and reviews the nature and type of satellite images used, the techniques applied to classify land cover/use changes, the models to assess the link between spatio-temporal factors and UHI effect, and the effects of these factors on UHI. The review results show that: a) 54% of the studies used Landsat TM images for modelling the UHI effect followed by Landsat ETM (34%), and MODIS (28%); b) land cover indices (46%), followed by supervised classification (17%) were the dominant methods to derive land cover/use changes associated with UHI effect; c) ordinary least square regression is the most commonly applied method (68%) to investigate the link between different spatio-temporal factors and the UHI effect followed by comparative analysis (33%); and d) the most common factors affecting the UHI effect as reported in the reviewed studies, include vegetation cover (44%), season (33%), built-up area (28%), day/night (25%), population density (14%), water body (12%) together with others. This research discusses the findings in policy terms and provides directions for future research.

  4. Analysis of human factors on urban heat island and simulation of urban thermal environment in Lanzhou city, China

    Science.gov (United States)

    Pan, Jinghu

    2015-01-01

    Urban heat island (UHI) effect is a global phenomenon caused by urbanization. Because of the number and complexity of factors contributing to the urban thermal environment, traditional statistical methods are insufficient for acquiring data and analyzing the impact of human activities on the thermal environment, especially for identifying which factors are dominant. The UHI elements were extracted using thermal infrared remote sensing data to retrieve the land surface temperatures of Lanzhou city, and then adopting an object-oriented fractal net evolution approach to create an image segmentation of the land surface temperature (LST). The effects of urban expansion on the urban thermal environment were quantitatively analyzed. A comprehensive evaluation system of the urban thermal environment was constructed, the spatial pattern of the urban thermal environment in Lanzhou was assessed, and principal influencing factors were identified using spatial principal component analysis (SPCA) and multisource spatial data. We found that in the last 20 years, the UHI effect in Lanzhou city has been strengthened, as the UHI ratio index has increased from 0.385 in 1993 to 0.579 in 2001 and to 0.653 in 2011. The UHI expansion had a spatiotemporal consistency with the urban expansion. The four major factors that affect the spatial pattern of the urban thermal environment in Lanzhou can be ranked in the following order: landscape configuration, anthropogenic heat release, urban construction, and gradient from man-made to natural land cover. These four together accounted for 91.27% of the variance. A linear model was thus successfully constructed, implying that SPCA is helpful in identifying major contributors to UHI. Regression analysis indicated that the instantaneous LST and the simulated thermal environment have a good linear relationship, the correlation coefficient between the two reached 0.8011, highly significant at a confidence level of 0.001.

  5. Evaluating Mitigation Effects of Urban Heat Islands in a Historical Small Center with the ENVI-Met® Climate Model

    Directory of Open Access Journals (Sweden)

    Dario Ambrosini

    2014-10-01

    Full Text Available Urban morphology and increasing building density play a key role in the overall use of energy and promotion of environmental sustainability. The urban environment causes a local increase of temperature, a phenomenon known as Urban Heat Island (UHI. The purpose of this work is the study of the possible formation of an UHI and the evaluation of its magnitude, in the context of a small city, carried out with the ENVI-met® software. For this purpose, a simulation was needed, and this simulation is preparatory for a monitoring campaign on site, which will be held in the immediate future. ENVI-met® simulates the temporal evolution of several thermodynamics parameters on a micro-scale range, creating a 3D, non-hydrostatic model of the interactions between building-atmosphere-vegetation. The weather conditions applied simulate a typical Italian summer heat wave. Three different case-studies have been analyzed: Base Case, Cool Case and Green Case. Analysis of the actual state in the Base Case shows how even in an area with average building density, such as the old town center of a small city, fully developed UHI may rise with strong thermal gradients between built areas and open zones with plenty of vegetation. These gradients arise in a really tiny space (few hundreds of meters, showing that the influence of urban geometry can be decisive in the characterization of local microclimate. Simulations, carried out considering the application of green or cool roofs, showed small relevant effects as they become evident only in large areas heavily built up (metropolis subject to more intense climate conditions.

  6. The Impact of Albedo Increase to Mitigate the Urban Heat Island in Terni (Italy Using the WRF Model

    Directory of Open Access Journals (Sweden)

    Elena Morini

    2016-10-01

    Full Text Available The impacts of the urban heat island (UHI phenomenon on energy consumption, air quality, and human health have been widely studied and described. Mitigation strategies have been developed to fight the UHI and its detrimental consequences. A potential countermeasure is the increase of urban albedo by using cool materials. Cool materials are highly reflective materials that can maintain lower surface temperatures and thus can present an effective solution to mitigate the UHI. Terni’s proven record of high temperatures along with related environmental and comfort issues in its urban areas have reflected the local consequences of global warming. On the other hand, it promoted integrated actions by the government and research institutes to investigate solutions to mitigate the UHI effects. In this study, the main goal is to investigate the effectiveness of albedo increase as a strategy to tackle the UHI, by using the Weather Research and Forecasting (WRF mesoscale model to simulate the urban climate of Terni (Italy. Three different scenarios through a summer heat wave in the summer of 2015 are analyzed. The Base Scenario, which simulates the actual conditions of the urban area, is the control case. In the Albedo Scenario (ALB Scenario, the albedo of the roof, walls and road of the whole urban area is increased. In the Albedo-Industrial Scenario (ALB-IND Scenario, the albedo of the roof, walls and road of the area occupied by the main industrial site of Terni, located in close proximity to the city center, is increased. The simulation results show that the UHI is decreased up to 2 °C both at daytime and at nighttime in the ALB and in ALB-IND Scenarios. Peak temperatures in the urban area can be decreased by 1 °C at daytime, and by about 2 °C at nighttime. Albedo increase in the area of interest might thus represent an opportunity to decrease the UHI effect and its consequences.

  7. Contrasting responses of urban and rural surface energy budgets to heat waves explain synergies between urban heat islands and heat waves

    International Nuclear Information System (INIS)

    Li, Dan; Sun, Ting; Liu, Maofeng; Yang, Long; Wang, Linlin; Gao, Zhiqiu

    2015-01-01

    Heat waves (HWs) are projected to become more frequent and last longer over most land areas in the late 21st century, which raises serious public health concerns. Urban residents face higher health risks due to synergies between HWs and urban heat islands (UHIs) (i.e., UHIs are higher under HW conditions). However, the responses of urban and rural surface energy budgets to HWs are still largely unknown. This study analyzes observations from two flux towers in Beijing, China and reveals significant differences between the responses of urban and rural (cropland) ecosystems to HWs. It is found that UHIs increase significantly during HWs, especially during the nighttime, implying synergies between HWs and UHIs. Results indicate that the urban site receives more incoming shortwave radiation and longwave radiation due to HWs as compared to the rural site, resulting in a larger radiative energy input into the urban surface energy budget. Changes in turbulent heat fluxes also diverge strongly for the urban site and the rural site: latent heat fluxes increase more significantly at the rural site due to abundant available water, while sensible heat fluxes and possibly heat storage increase more at the urban site. These comparisons suggest that the contrasting responses of urban and rural surface energy budgets to HWs are responsible for the synergies between HWs and UHIs. As a result, urban mitigation and adaption strategies such as the use of green roofs and white roofs are needed in order to mitigate the impact of these synergies. (letter)

  8. Green Space and Deaths Attributable to the Urban Heat Island Effect in Ho Chi Minh City.

    Science.gov (United States)

    Dang, Tran Ngoc; Van, Doan Quang; Kusaka, Hiroyuki; Seposo, Xerxes T; Honda, Yasushi

    2018-04-01

    To quantify heat-related deaths in Ho Chi Minh City, Vietnam, caused by the urban heat island (UHI) and explore factors that may alleviate the impact of UHIs. We estimated district-specific meteorological conditions from 2010 to 2013 using the dynamic downscaling model and calculated the attributable fraction and number of mortalities resulting from the total, extreme, and mild heat in each district. The difference in attributable fraction of total heat between the central and outer districts was classified as the attributable fraction resulting from the UHI. The association among attributable fraction, attributable number with a green space, population density, and budget revenue of each district was then explored. The temperature-mortality relationship between the central and outer areas was almost identical. The attributable fraction resulting from the UHI was 0.42%, which was contributed by the difference in temperature distribution between the 2 areas. Every 1-square-kilometer increase in green space per 1000 people can prevent 7.4 deaths caused by heat. Green space can alleviate the impacts of UHIs, although future studies conducting a heath economic evaluation of tree planting are warranted.

  9. Heat stress control in the TMI-2 [Three Mile Island Unit 2] defueling and decontamination activities

    International Nuclear Information System (INIS)

    Schork, J.S.; Parfitt, B.A.

    1988-01-01

    During the initial stages of the Three Mile Island Unit 2 (TMI-2) defueling and decontamination activities for the reactor building, it was realized that the high levels of loose radioactive contamination would require the use of extensive protective clothing by entry personnel. While there was no doubt that layered protective clothing protects workers from becoming contaminated, it was recognized that these same layers of clothing would impose a very significant heat stress burden. To prevent the potentially serious consequences of a severe reaction to heat stress by workers in the hostile environment of the TMI-2 reactor building and yet maintain the reasonable work productivity necessary to perform the recovery adequately, an effective program of controlling worker exposure to heat stress had to be developed. Body-cooling devices produce a flow of cool air, which is introduced close to the skin to remove body heat through convection and increased sweat evaporation. The cooling effect produced by the Vortex tube successfully protected the workers from heat stress, however, there were several logistical and operational problems that hindered extensive use of these devices. The last type of cooling garment examined was the frozen water garment (FWG) developed by Elizier Kamon at the Pennsylvania State University as part of an Electric Power Research Institute research grant. Personal protection, i.e., body cooling, engineering controls, and administrative controls, have been implemented successfully

  10. Effects of Urbanization and Seasonal Cycle on the Surface Urban Heat Island Patterns in the Coastal Growing Cities: A Case Study of Casablanca, Morocco

    Directory of Open Access Journals (Sweden)

    Hicham Bahi

    2016-10-01

    Full Text Available The urban heat island (UHI phenomenon is a harmful environmental problem in urban areas affecting both climatic and ecological processes. This paper aims to highlight and monitor the spatial distribution of Surface UHI (SUHI in the Casablanca region, Morocco, using remote sensing data. To achieve this goal, a time series of Landsat TM/ETM+/OLI-TIRS images was acquired from 1984 to 2016 and analyzed. In addition, nocturnal MODIS images acquired from 2005 to 2015 were used to evaluate the nighttime SUHI. In order to better analyze intense heat produced by urban core, SUHI intensity (SUHII was computed by quantifying the difference of land surface temperature (LST between urban and rural areas. The urban core SUHII appears more significant in winter seasons than during summer, while the pattern of SUHII becomes moderate during intermediate seasons. During winter, the average daytime SUHII gradually increased in the residential area of Casablanca and in some small peri-urban cities by more than 1 °C from 1984 to 2015. The industrial areas of the Casablanca region were affected by a significant rise in SUHII exceeding 15 °C in certain industrial localities. In contrast, daytime SUHII shows a reciprocal effect during summer with emergence of a heat island in rural areas and development of cool islands in urban and peri-urban areas. During nighttime, the SUHII remains positive in urban areas year-round with higher values in winter as compared to summer. The results point out that the seasonal cycle of daytime SUHII as observed in the Casablanca region is different from other mid-latitude cities, where the highest values are often observed in summer during the day.

  11. Spatial distribution of urban heat island in Hangzhou and its mitigation countermeasures

    DEFF Research Database (Denmark)

    Wang, W.-W.; Li, G.-L.; Xue, J.

    2009-01-01

    of the evolution of urban landuse types, the changes of urban spatial pattern, the rationality of the urban land layout, and the emission of anthropogenic heat. Finally, in the perspective of urban planning, some mitigation countermeasures including the reasonable control of the expansion of urban landuse......, construction of the urban ecological open space, optimization of the layout of urban landuse, and planning for underlaying surface were put forward. This aims to provide a reference to work in improving the thermal environment of Hangzhou City.......Taking Hangzhou City in summer as a case, the thermal infrared remote sensing image (Landsat 5 TM) was used to extract and inverse the surface land cover types and surface temperature of Hangzhou City. The spatial distribution characteristics of urban heat island was analyzed in the city...

  12. Energy Savings Calculations for Heat Island Reduction Strategies in Baton Rouge, Sacramento and Salt Lake City

    Energy Technology Data Exchange (ETDEWEB)

    Konopacki, S.; Akbari, H.

    2000-03-01

    In 1997, the US Environmental Protection Agency (EPA) established the ''Heat Island Reduction Initiative'', to quantify the potential benefits of Heat Island Reduction (HIR) strategies (i.e., shade trees, reflective roofs, reflective pavements and urban vegetation) to reduce cooling energy use in buildings, lower the ambient air temperature and improve urban air quality in cities, and reduce CO2 emissions from power plants. Under this initiative, the Urban Heat Island Pilot Project (UHIPP) was created with the objective to investigate the potential of HIR strategies in residential and commercial buildings in three initial UHIPP cities: Baton Rouge, Sacramento and Salt Lake City. This paper summarizes our efforts to calculate the annual energy savings, peak power avoidance and annual C02 reduction of HIR strategies in the three initial cities. In this analysis, we focused on three building types that offer most savings potential: single-family residence, office and retail store. Each building type was characterized in detail by old or new construction and with a gas furnace or an electric heat pump. We defined prototypical building characteristics for each building type and simulated the impact of HIR strategies on building cooling and heating energy use and peak power demand using the DOE-2.IE model. Our simulations included the impact of (1) strategically-placed shade trees near buildings [direct effect], (2) use of high-albedo roofing material on building [direct effect], (3) combined strategies I and 2 [direct effect], (4) urban reforestation with high-albedo pavements and building surfaces [indirect effect] and (5) combined strategies 1, 2 and 4 [direct and indirect effects]. We then estimated the total roof area of air-conditioned buildings in each city using readily obtainable data to calculate the metropolitan-wide impact of HIR strategies. The results show, that in Baton Rouge, potential annual energy savings of $15M could be realized by

  13. The effect of urban heat island on Izmir's city ecosystem and climate.

    Science.gov (United States)

    Corumluoglu, Ozsen; Asri, Ibrahim

    2015-03-01

    Depending on the researches done on urban landscapes, it is found that the heat island intensity caused by the activities in any city has some impact on the ecosystem of the region and on the regional climate. Urban areas located in arid and semiarid lands somehow represent heat increase when it is compared with the heat in the surrounding rural areas. Thus, cities located amid forested and temperate climate regions show moderate temperatures. The impervious surfaces let the rainfall leave the city lands faster than undeveloped areas. This effect reduces water's cooling effects on these lands. More significantly, if trees and other vegetations are rare in any region, it means less evapotranspiration-the process by which trees "exhale" water. Trees also contribute to the cooling of urban lands by their shade. Land cover and land use maps can easily be produced by processing of remote sensing satellites' images, like processing of Landsat's images. As a result of this process, urban regions can be distinguished from vegetation. Analyzed GIS data produced and supported by these images can be utilized to determine the impact of urban land on energy, water, and carbon balances at the Earth's surface. Here in this study, it is found that remote sensing technique with thermal images is a liable technique to asses where urban heat islands and hot spots are located in cities. As an application area, in Izmir, it was found that the whole city was in high level of surface temperature as it was over 28 °C during the summer times. Beside this, the highest temperature values which go up to 47 °C are obtained at industrial regions especially where the iron-steel factories and the related industrial activities are.

  14. Opportunities for Saving Energy and Improving Air Quality in Urban Heat Islands

    Energy Technology Data Exchange (ETDEWEB)

    Akbari, Hashem

    2007-07-01

    World energy use is the main contributor to atmospheric CO2. In 2002, about 7.0 giga metric tons of carbon (GtC) were emitted internationally by combustion of gas, liquid, and solid fuels (CDIAC, 2006), 2 to 5 times the amount contributed by deforestation (Brown et al., 1988). The share of atmospheric carbon emissions for the United States from fossil fuel combustion was 1.6 GtC. Increasing use of fossil fuel and deforestation together have raised atmospheric CO{sub 2} concentration some 25% over the last 150 years. According to global climate models and preliminary measurements, these changes in the composition of the atmosphere have already begun raising the Earth's average temperature. If current energy trends continue, these changes could drastically alter the Earth's temperature, with unknown but potentially catastrophic physical and political consequences. During the last three decades, increased energy awareness has led to conservation efforts and leveling of energy consumption in the industrialized countries. An important byproduct of this reduced energy use is the lowering of CO{sub 2} emissions. Of all electricity generated in the United States, about one-sixth is used to air-condition buildings. The air-conditioning use is about 400 tera-watt-hours (TWh), equivalent to about 80 million metric tons of carbon (MtC) emissions, and translating to about $40 billion (B) per year. Of this $40 B/year, about half is used in cities that have pronounced 'heat islands'. The contribution of the urban heat island to the air-conditioning demand has increased over the last 40 years and it is currently at about 10%. Metropolitan areas in the United States (e.g., Los Angeles, Phoenix, Houston, Atlanta, and New York City) have typically pronounced heat islands that warrant special attention by anyone concerned with broad-scale energy efficiency (HIG, 2006). The ambient air is primarily heated through three processes: direct absorption of solar radiation

  15. Dominant control of agriculture and irrigation on urban heat island in India.

    Science.gov (United States)

    Kumar, Rahul; Mishra, Vimal; Buzan, Jonathan; Kumar, Rohini; Shindell, Drew; Huber, Matthew

    2017-10-25

    As is true in many regions, India experiences surface Urban Heat Island (UHI) effect that is well understood, but the causes of the more recently discovered Urban Cool Island (UCI) effect remain poorly constrained. This raises questions about our fundamental understanding of the drivers of rural-urban environmental gradients and hinders development of effective strategies for mitigation and adaptation to projected heat stress increases in rapidly urbanizing India. Here we show that more than 60% of Indian urban areas are observed to experience a day-time UCI. We use satellite observations and the Community Land Model (CLM) to identify the impact of irrigation and prove for the first time that UCI is caused by lack of vegetation and moisture in non-urban areas relative to cities. In contrast, urban areas in extensively irrigated landscapes generally experience the expected positive UHI effect. At night, UHI warming intensifies, occurring across a majority (90%) of India's urban areas. The magnitude of rural-urban temperature contrasts is largely controlled by agriculture and moisture availability from irrigation, but further analysis of model results indicate an important role for atmospheric aerosols. Thus both land-use decisions and aerosols are important factors governing, modulating, and even reversing the expected urban-rural temperature gradients.

  16. Detailed Urban Heat Island Projections for Cities Worldwide: Dynamical Downscaling CMIP5 Global Climate Models

    Directory of Open Access Journals (Sweden)

    Dirk Lauwaet

    2015-06-01

    Full Text Available A new dynamical downscaling methodology to analyze the impact of global climate change on the local climate of cities worldwide is presented. The urban boundary layer climate model UrbClim is coupled to 11 global climate models contained in the Coupled Model Intercomparison Project 5 archive, conducting 20-year simulations for present (1986–2005 and future (2081–2100 climate conditions, considering the Representative Concentration Pathway 8.5 climate scenario. The evolution of the urban heat island of eight different cities, located on three continents, is quantified and assessed, with an unprecedented horizontal resolution of a few hundred meters. For all cities, urban and rural air temperatures are found to increase strongly, up to 7 °C. However, the urban heat island intensity in most cases increases only slightly, often even below the range of uncertainty. A potential explanation, focusing on the role of increased incoming longwave radiation, is put forth. Finally, an alternative method for generating urban climate projections is proposed, combining the ensemble temperature change statistics and the results of the present-day urban climate.

  17. Urban surface temperature behaviour and heat island effect in a tropical planned city

    Science.gov (United States)

    Ahmed, Adeb Qaid; Ossen, Dilshan Remaz; Jamei, Elmira; Manaf, Norhashima Abd; Said, Ismail; Ahmad, Mohd Hamdan

    2015-02-01

    Putrajaya is a model city planned with concepts of a "city in the garden" and an "intelligent city" in the tropics. This study presents the behaviour of the surface temperature and the heat island effect of Putrajaya. Findings show that heat island intensity is 2 °C on average at nighttime and negligible at daytime. But high surface temperature values were recorded at the main boulevard due to direct solar radiation incident, street orientation in the direction of northeast and southwest and low building height-to-street width ratio. Buildings facing each other had cooling effect on surfaces during the morning and evening hours; conversely, they had a warming effect at noon. Clustered trees along the street are effective in reducing the surface temperature compared to scattered and isolated trees. Surface temperature of built up areas was highest at noon, while walls and sidewalks facing northwest were hottest later in the day. Walls and sidewalks that face northwest were warmer than those that face southeast. The surface temperatures of the horizontal street surfaces and of vertical façades are at acceptable levels relative to the surface temperature of similar surfaces in mature cities in subtropical, temperate and Mediterranean climates.

  18. PEMBAHASAN MENGENAI EFEK URBAN HEAT ISLAND DAN SOLUSI ALTERNATIF BAGI KOTA JAKARTA

    Directory of Open Access Journals (Sweden)

    Andrew V Limas

    2014-01-01

    Full Text Available Hadirnya Jakarta sebagai salah satu kota metropolitan yang berkembang di dunia, menjadikan Jakarta sebagai salah satu kota yang harus diperhitungkan konsistensinya. Letaknya yang berada di daerah tropis serta memiliki angka kepadatan penduduk yang tinggi menciptakan sebuah masalah serius bagi bangunan perkantoran dan perumahan di dalamnya, polemik yang dimaksud adalah adanya “efek pemanasan di daerah perkotaan”. Artikel ini akan membahas definisi dan aplikasi dari sistem “atap hijau” bersamaan dengan keuntungan dan keunikannya dalam menjawab kebutuhan dalam mengurangi tingginya temperatur pada pusat perkantoran dan daerah perumahan di kota Jakarta. Kata Kunci : efek pemanasan daerah perkotaan, kepadatan penduduk, sistem atap hijau Abstract Considering Jakarta as one of the developing metropolitan cities in the world creates, the need to reckon it’s consistency has emerged. Located in a tropical area with  high population density creates a serious problem to its city planning, in other words an urban heat island effect. This paper will discuss the definition and application of a green roof system along with its advantages or uniqueness to answer the need to reduce high temperature in central business district and residental areas for city of Jakarta in particular. Keywords : urban heat island effect, population density, green roof system

  19. Satellite-based detection of global urban heat-island temperature influence

    Science.gov (United States)

    Gallo, K.P.; Adegoke, Jimmy O.; Owen, T.W.; Elvidge, C.D.

    2002-01-01

    This study utilizes a satellite-based methodology to assess the urban heat-island influence during warm season months for over 4400 stations included in the Global Historical Climatology Network of climate stations. The methodology includes local and regional satellite retrievals of an indicator of the presence green photosynthetically active vegetation at and around the stations. The difference in local and regional samples of the normalized difference vegetation index (NDVI) is used to estimate differences in mean air temperature. Stations classified as urban averaged 0.90??C (N. Hemisphere) and 0.92??C (S. Hemisphere) warmer than the surrounding environment on the basis of the NDVI-derived temperature estimates. Additionally, stations classified as rural averaged 0.19??C (N. Hemisphere) and 0.16??C (S. Hemisphere) warmer than the surrounding environment. The NDVI-derived temperature estimates were found to be in reasonable agreement with temperature differences observed between climate stations. The results suggest that satellite-derived data sets can be used to estimate the urban heat-island temperature influence on a global basis and that a more detailed analysis of rural stations and their surrounding environment may be necessary to assure that temperature trends derived from assumed rural environments are not influenced by changes in land use/land cover. Copyright 2002 by the American Geophysical Union.

  20. Satellite and ground-based sensors for the Urban Heat Island analysis in the city of Rome

    DEFF Research Database (Denmark)

    Fabrizi, Roberto; Bonafoni, Stefania; Biondi, Riccardo

    2010-01-01

    In this work, the trend of the Urban Heat Island (UHI) of Rome is analyzed by both ground-based weather stations and a satellite-based infrared sensor. First, we have developed a suitable algorithm employing satellite brightness temperatures for the estimation of the air temperature belonging...... and nighttime scenes taken between 2003 and 2006 have been processed. Analysis of the Canopy Layer Heat Island (CLHI) during summer months reveals a mean growth in magnitude of 3-4 K during nighttime and a negative or almost zero CLHI intensity during daytime, confirmed by the weather stations. © 2010...... by the authors; licensee MDPI, Basel, Switzerland. Keyword: Thermal pollution,Summer months,Advanced-along track scanning radiometers,Urban heat island,Remote sensing,Canopy layer,Atmospheric temperature,Ground based sensors,Weather information services,Satellite remote sensing,Infra-red sensor,Weather stations...

  1. Urban Heat Islands (UHI) and the influence of city parks within the urban environment.

    Science.gov (United States)

    Garcia, W.; Shandas, V.; Voelkel, J.; Espinoza, D.

    2016-12-01

    Urban Heat Islands (UHI) and the influence of city parks within the urban environment.As cities grow outward and their populations increase the Urban Heat Island (UHI) phenomena becomes an ever more important topic to reducing environmental stressors. When UHI combines with human sensitivities such as pre-existing health conditions, and other vulnerabilities, finding an effective way to cool our cities is a matter of life and death. One way to cool an area is to introduce vegetation; which is abundant is in city parks. This study measures the cooling effect and temperature gradient of city parks; characterizing the relationship between the cooling effects within parks and surrounding neighborhoods. Past studies of the UHI are largely based on satellite images and, more recently, car traverses across that describe the ambient temperatures. The present project aims to understand the effects of parks on the UHI by asking two research questions: (1) how do the physical characteristics and designs of city parks impact the variation in ambient temperatures? And (2) what effect does the park have on cooling the surrounding neighborhoods? We address these questions by using a bicycle mounted with a temperature probe, and a series of geospatial analytics. The bicycle collects temperature data every one second, and the traverse intervals are an hour long to prevent normal fluctuations of daily temperature. Preliminary analysis shows that there is a temperature gradient within the parks (Figure 1). Further, the average temperature of the urban park could cool the surrounding area by upwards of 2°C, depending on the physical characteristics of then park and neighborhood. Our results suggest that the role of smaller parks and their design can reduce heat stress particularly among the vulnerable populations. These results can help urban planners make informed decisions when developing future city infrastructure.

  2. Wintertime urban heat island modified by global climate change over Japan

    Science.gov (United States)

    Hara, M.

    2015-12-01

    Urban thermal environment change, especially, surface air temperature (SAT) rise in metropolitan areas, is one of the major recent issues in urban areas. The urban thermal environmental change affects not only human health such as heat stroke, but also increasing infectious disease due to spreading out virus vectors habitat and increase of industry and house energy consumption. The SAT rise is mostly caused by global climate change and urban heat island (hereafter UHI) by urbanization. The population in Tokyo metropolitan area is over 30 millions and the Tokyo metropolitan area is one of the biggest megacities in the world. The temperature rise due to urbanization seems comparable to the global climate change in the major megacities. It is important to project how the urbanization and the global climate change affect to the future change of urban thermal environment to plan the adaptation and mitigation policy. To predict future SAT change in urban scale, we should estimate future UHI modified by the global climate change. This study investigates change in UHI intensity (UHII) of major metropolitan areas in Japan by effects of the global climate change. We performed a series of climate simulations. Present climate simulations with and without urban process are conducted for ten seasons using a high-resolution numerical climate model, the Weather Research and Forecasting (WRF) model. Future climate projections with and without urban process are also conducted. The future projections are performed using the pseudo global warming method, assuming 2050s' initial and boundary conditions estimated by a GCM under the RCP scenario. Simulation results indicated that UHII would be enhanced more than 30% in Tokyo during the night due to the global climate change. The enhancement of urban heat island is mostly caused by change of lower atmospheric stability.

  3. The Urban Heat Island Behavior of a Large Northern Latitude Metropolitan Area

    Science.gov (United States)

    Twine, T. E.; Snyder, P. K.; Hertel, W.; Mykleby, P.

    2012-12-01

    Urban heat islands (UHIs) occur when urban and suburban areas experience elevated temperatures relative to their rural surroundings because of differences in vegetation cover, buildings and other development, and infrastructure. Most cities in the United States are warming at twice the rate of the outlying rural areas and the planet as a whole. Temperatures in the urban center can be 2-5°C warmer during the daytime and as much as 10°C at night. Urban warming is responsible for excessive energy consumption, heat-related health effects, an increase in urban pollution, degradation of urban ecosystems, changes in the local meteorology, and an increase in thermal pollution into urban water bodies. One mitigation strategy involves manipulating the surface energy budget to either reduce the amount of solar radiation absorbed at the surface or offset absorbed energy through latent cooling. Options include using building materials with different properties of reflectivity and emissivity, increasing the reflectivity of parking lots, covering roofs with vegetation, and increasing the amount of vegetation overall through tree planting or increasing green space. The goal of the Islands in the Sun project is to understand the formation and behavior of urban heat islands and to mitigate their effects through sensible city engineering and design practices. As part of this project, we have been characterizing the UHI of the Twin Cities Metropolitan Area (TCMA), a 16,000 square kilometer urban and suburban region located in east central Minnesota that includes the two cities of Minneapolis and Saint Paul, and evaluating mitigation strategies for reducing urban warming. Annually, the TCMA has a modest 2-3°C UHI that is especially apparent in winter when the urban core can be up to 5-6°C warmer than the surrounding countryside. We present an analysis of regional temperature variations from a dense network of sensors located throughout the TCMA. We focus on the diurnal and seasonal

  4. Streamlined energy-savings calculations for heat-island reduction strategies

    Energy Technology Data Exchange (ETDEWEB)

    Akbari, Hashem; Konopacki, Steven J.

    2003-03-15

    We have developed summary tables (sorted by heating- and cooling-degree-days) to estimate the potential of Heat-Island Reduction (HIR) strategies (i.e., solar-reflective roofs, shade trees, reflective pavements, and urban vegetation) to reduce cooling-energy use in buildings. The tables provide estimates of savings for both direct effect (reducing heat gain through the building shell) and indirect effect (reducing the ambient air temperature). In this analysis, we considered three building types that offer the most savings potential : residences, offices, and retail stores. Each building type was characterized in detail by Pre-1980 (old) or 1980+ (new) construction vintage and with natural gas or electricity as heating fuel. We defined prototypical-building characteristics for each building type and simulated the effects of HIR strategies on building cooling and heating energy use and peak power demand using the DOE-2.1E model and weather data for about 240 locations in the U.S. A statistical analysis of previously completed simulations for five cities was used to estimate the indirect savings. Our simulations included the effect of (1) solar-reflective roofing material on building [direct effect], (2) placement of deciduous shade trees near south and west walls of building [direct effect], and (3) ambient cooling achieved by urban reforestation and reflective building surfaces and pavements [indirect effect]. Upon completion of estimating the direct and indirect energy savings for all the selected locations, we integrated the results in tables arranged by heating- and cooling-degree-days. We considered 15 bins for heating-degree-days, and 11 bins for cooling-degree-days. Energy use and savings are presented per 1000 ft2 of roof area. In residences heated with gas and in climates with greater than 1000 cooling-degree-days, the annual electricity savings in Pre-1980 stock ranged from 650 to 1300 kWh/1000ft2; for 1980+ stock savings ranged 300 to 600 kWh/1000 ft2

  5. Generalized Scaling of Urban Heat Island Effect and Its Applications for Energy Consumption and Renewable Energy

    Directory of Open Access Journals (Sweden)

    T.-W. Lee

    2014-01-01

    Full Text Available In previous work from this laboratory, it has been found that the urban heat island intensity (UHI can be scaled with the urban length scale and the wind speed, through the time-dependent energy balance. The heating of the urban surfaces during the daytime sets the initial temperature, and this overheating is dissipated during the night-time through mean convection motion over the urban surface. This may appear to be in contrast to the classical work by Oke (1973. However, in this work, we show that if the population density is used in converting the population data into urbanized area, then a good agreement with the current theory is found. An additional parameter is the “urban flow parameter,” which depends on the urban building characteristics and affects the horizontal convection of heat due to wind. This scaling can be used to estimate the UHI intensity in any cities and therefore predict the required energy consumption during summer months. In addition, all urbanized surfaces are expected to exhibit this scaling, so that increase in the surface temperature in large energy-consumption or energy-producing facilities (e.g., solar electric or thermal power plants can be estimated.

  6. A TEMPORAL AND SPATIAL ANALYSIS OF URBAN HEAT ISLAND IN BASIN CITY UTILIZING REMOTE SENSING TECHNIQUES

    Directory of Open Access Journals (Sweden)

    H.-T. Chang

    2016-06-01

    Full Text Available Urban Heat Island (UHI has been becoming a key factor in deteriorating the urban ecological environment. Spatial-temporal analysis on its prototype of basin city’s UHI and quantitatively evaluating effect from rapid urbanization will provide theoretical foundation for relieving UHI effect. Based on Landsat 8, ETM+ and TM images of Taipei basin areas from 1900 to 2015, this article has retrieved the land surface temperature (LST at summer solstice of each year, and then analysed spatial-temporal pattern and evolution characters of UHI in Taipei basin in this decade. The results showed that the expansion built district, UHI area constantly expanded from centre city to the suburb areas. The prototype of UHI in Taipei basin that showed in addition to higher temperatures in the centre city also were relatively high temperatures gathered boundaries surrounded by foot of mountains side. It calls “sinking heat island”. From 1900 to 2000, the higher UHI areas were different land use type change had obvious difference by public infrastructure works. And then, in next 15 years till 2015, building density of urban area has been increasing gradually. It has the trend that UHI flooding raises follow urban land use density. Hot spot of UHI in Taipei basin also has the same characteristics. The results suggest that anthropogenic heat release probably plays a significant role in the UHI effect, and must be considered in urban planning adaptation strategies.

  7. An urban heat island in tropical area investigated by remote sensing: Belo Horizonte City

    International Nuclear Information System (INIS)

    Gastelois, B.C.R.J.; de Assis, E.S.

    1992-01-01

    The inappropriate urbanization process in tropical areas causes local climatic alterations forming heat islands over the cities. In order to guide urban planning in the control of the environmental urban quality, as for the thermal comfort is concerned, it has developed a method to evaluate the thermal behavior of built and urban green areas. Two TM-LANDSAT images from Belo Horizonte City, the study area, were chosen based on summer and winter typical days statistically characterized. Bands 3 and 4 of these images were combined to produce a local vegetation index map. Band 6 was used to observe the warmer and cooler areas in the city. Some heat nucleons were identified through data analysis of remote sensing, meteorological and urban land use. The mean maximum temperature of the principal heat nuclei exceeds, in summer, the limit value of diurnal thermal comfort for the city climate, using Givoni's Bioclimatic Chart. During the day period, the areas with a lower vegetation index, more density and predominating horizontal settlements were the most warmer. The cooling effect of urban green areas was very local. Thus, it should be regularly distributed in the built areas. The limits of occupation density and edification could be fixed, too, considering its impacts on the urban thermal environment

  8. Estudio sociolinguistico de una variante sintactica el fenomeno "dequeismo" en el espanol canario (Sociolinguistic Study of a Syntactic Variant: The "Dequeismo" Phenomenon in Canary Islands Spanish).

    Science.gov (United States)

    Serrano, Maria Jose

    1998-01-01

    The dequeismo phenomenon is occurring more frequently in spoken Spanish in both Spain and in Latin America. Introduction of the preposition "de" before "que" in nominal complements exploits one recourse in Spanish, namely the deictic capacity of prepositional "de" as a marker or introducer of the speaker's…

  9. Desert heat island study in winter by mobile transect and remote sensing techniques

    Science.gov (United States)

    Sun, Chen-Yi; Brazel, Anthony J.; Chow, Winston T. L.; Hedquist, Brent C.; Prashad, Lela

    2009-10-01

    A familiar problem in urban environments is the urban heat island (UHI), which potentially increases air conditioning demands, raise pollution levels, and could modify precipitation patterns. The magnitude and pattern of UHI effects have been major concerns of a lot of urban environment studies. Typically, research on UHI magnitudes in arid regions (such as Phoenix, AZ, USA) focuses on summer. UHI magnitudes in Phoenix (more than three million population) attain values in excess of 5°C. This study investigated the early winter period—a time when summer potential evapotranspiration >250 mm has diminished to 8.0°C, comparable to summertime UHI conditions. Through analysis of the Oke (1998) weather factor ΦW, it was determined thermally induced nighttime cool drainage winds could account for inflating the UHI magnitude in winter.

  10. "I Feel Suffocated:" Understandings of Climate Change in an Inner City Heat Island.

    Science.gov (United States)

    Singer, Merrill; Hasemann, Jose; Raynor, Abigail

    2016-01-01

    Global climate change is contributing to a range of adverse environmental and weather shifts, including more intense and more frequent heatwaves and an intensification of the urban heat island effect. These changes are known to produce a set of significant and differentially distributed health problems, with a particularly high burden among poor and marginalized populations. In this article, we report findings from a qualitative study of community knowledge, attitudes, health and other concerns, and behavioral responses regarding mounting urban temperatures and related environmental health issues among Latinos living in the city of Hartford, CT in northeast United States. Findings suggest the need for enhanced participation in knowledge dissemination and preparedness planning based on the coproduction of knowledge about climate change and community responses to it. The special role of anthropology in such efforts is highlighted.

  11. Investigating the vertical dimension of Singapore's urban heat island through quadcopter platforms: an pilot study

    Science.gov (United States)

    Chow, Winston; Ho, Dawn

    2016-04-01

    In numerous cities, measurements of urban warmth in most urban heat island (UHI) studies are generally constrained towards surface or near-surface (quadcopter platforms to measure urban temperature profiles up to 100 m above ground level in Singapore, which is a rapidly urbanizing major tropical metropolis. Three different land use/land cover categories were sampled; a high-rise residential estate, a university campus, and an urban park/green-space. Sorties were flown repeatedly at four different times - sunrise, noon, sunset and midnight. Initial results indicate significant variations in intra-site stability and inversion development between the urban canopy and boundary layers. These profiles are also temporally dynamic, depending on the time of day and larger-scale weather conditions.

  12. Effectiveness of Different Urban Heat Island Mitigation Methods and Their Regional Impacts

    Science.gov (United States)

    Zhang, N.

    2017-12-01

    Cool roofs and green roofs are two popular methods to mitigate urban heat island and improve urban climate. The effectiveness of different urban heat island mitigation strategies in the summer of 2013 in the Yangtze River Delta, China is investigated using the WRF (Weather Research and Forecasting) model coupled with a physically based urban canopy model. The modifications to the roof surface changed the urban surface radiation balance and then modified the local surface energy budget. Both cool roofs and green roofs led to lower surface skin temperature and near-surface air temperature. Increasing the roof albedo to 0.5 caused a similar effectiveness as covering 25% of urban roofs with vegetation; increasing roof albedo to 0.7 caused a similar near-surface air temperature decrease as 75% green roof coverage. The near-surface relative humidity increased in both cool roof and green roof experiments because of the combination of the impacts of increases in specific humidity and decreases in air temperature. The regional impacts of cool roofs and green roofs were evaluated using the regional effect index. The regional effect could be found in both near-surface air temperature and surface specific/relative humidity when the percentage of roofs covered with high albedo materials or green roofs reached a higher fraction (greater than 50%). The changes in the vertical profiles of temperature cause a more stable atmospheric boundary layer over the urban area; at the same time, the crossover phenomena occurred above the boundary layer due to the decrease in vertical wind speed.

  13. A Satellite-Derived Climatological Analysis of Urban Heat Island over Shanghai during 2000–2013

    Directory of Open Access Journals (Sweden)

    Weijiao Huang

    2017-06-01

    Full Text Available The urban heat island is generally conducted based on ground observations of air temperature and remotely sensing of land surface temperature (LST. Satellite remotely sensed LST has the advantages of global coverage and consistent periodicity, which overcomes the weakness of ground observations related to sparse distributions and costs. For human related studies and urban climatology, canopy layer urban heat island (CUHI based on air temperatures is extremely important. This study has employed remote sensing methodology to produce monthly CUHI climatology maps during the period 2000–2013, revealing the spatiotemporal characteristics of daytime and nighttime CUHI during this period of rapid urbanization in Shanghai. Using stepwise linear regression, daytime and nighttime air temperatures at the four overpass times of Terra/Aqua were estimated based on time series of Terra/Aqua-MODIS LST and other auxiliary variables including enhanced vegetation index, normalized difference water index, solar zenith angle and distance to coast. The validation results indicate that the models produced an accuracy of 1.6–2.6 °C RMSE for the four overpass times of Terra/Aqua. The models based on Terra LST showed higher accuracy than those based on Aqua LST, and nighttime air temperature estimation had higher accuracy than daytime. The seasonal analysis shows daytime CUHI is strongest in summer and weakest in winter, while nighttime CUHI is weakest in summer and strongest in autumn. The annual mean daytime CUHI during 2000–2013 is 1.0 and 2.2 °C for Terra and Aqua overpass, respectively. The annual mean nighttime CUHI is about 1.0 °C for both Terra and Aqua overpass. The resultant CUHI climatology maps provide a spatiotemporal quantification of CUHI with emphasis on temperature gradients. This study has provided information of relevance to urban planners and environmental managers for assessing and monitoring urban thermal environments which are constantly

  14. Influence of Urbanization Factors on Surface Urban Heat Island Intensity: A Comparison of Countries at Different Developmental Phases

    Directory of Open Access Journals (Sweden)

    Yaoping Cui

    2016-07-01

    Full Text Available Urbanization is a global problem with demographic trends. The urban heat island plays a dominant role in local climate systems. Despite existing efforts to understand the impacts of multiple urbanization factors on the urban heat island globally, very little is known about the attribution of urban heat island magnitude to urbanization in different locations or developmental phases. In this study, based on global land surface temperature data, urban spatial domain data, gross domestic product (GDP, and population data, we analyzed the influence of multiple urbanization factors on global surface urban heat island intensity (SUHII. We also tentatively compared the abovementioned factors between different regions across the globe, especially between China and the USA, the largest countries that are experiencing or have experienced rapid urbanization in recent decades. The results showed that global SUHII had remarkable spatial heterogeneity due to the geographical and socioeconomic variation between cities. There was a significant correlation between SUHII and population as well as GDP in global cities. Moreover, this study suggested that the impacts of population on SUHII might be stronger in the early stages of urbanization, and the GDP factor would become a critical factor at a certain development level. The urban area also had non-ignorable impacts on SUHII, while the correlation between SUHII and urban shape was relatively weak. All these may imply that the best approach to slow down SUHII is to find other solutions, e.g., optimize the spatial configuration of urban internal landscapes, when the urbanization reaches a high level.

  15. Urban heat island research from 1991 to 2015: a bibliometric analysis

    Science.gov (United States)

    Huang, Qunfang; Lu, Yuqi

    2018-02-01

    A bibliometric analysis based on the Science Citation Index-Expanded (SCI-Expanded) database from the Web of Science was performed to review urban heat island (UHI) research from 1991 to 2015 and statistically assess its developments, trends, and directions. In total, 1822 papers published in 352 journals over the past 25 years were analyzed for scientific output; citations; subject categories; major journals; outstanding keywords; and leading countries, institutions, authors, and research collaborations. The number of UHI-related publications has continuously increased since 1991. Meteorology atmospheric sciences, environmental sciences, and construction building technology were the three most frequent subject categories. Building and Environment, International Journal of Climatology, and Theoretical and Applied Climatology were the three most popular publishing journals. The USA and China were the two leading countries in UHI research, contributing 49.56% of the total articles. Chinese Academy of Science, Arizona State University, and China Meteorological Administration published the most UHI articles. Weng QH and Santamouris M were the two most prolific authors. Author keywords were classified into four major groups: (1) research methods and indicators, e.g., remote sensing, field measurement, and models; (2) generation factors, e.g., impervious urban surfaces, urban geometry, waste heat, vegetation, and pollutants; (3) environmental effects, e.g., urban climate, heat wave, ecology, and pollution; and (4) mitigation and adaption strategies, e.g., roof technology cooling, reflective cooling, vegetation cooling, and urban geometry cooling. A comparative analysis of popular issues revealed that UHI determination (intensity, heat source, supporting techniques) remains the central topic, whereas UHI impacts and mitigation strategies are becoming the popular issues that will receive increasing scientific attention in the future. Modeling will continue to be the

  16. Comprehensive assessments of measures mitigating heat island phenomena in urban areas; Heat shinku wo riyoshita daikibo reibo system no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Ishitani, H; Yamada, K; Yamaji, K; Matsuhashi, T; Iizuka, E; Suzuki, T; Genchi, H; Komiyama, H [The University of Tokyo, Tokyo (Japan)

    1997-02-01

    This paper describes actual condition and measures against heat island (HI) phenomena in large urban areas with buildings. Tokyo was selected as a model. To extract typical pattern of daily change of air temperature, statistic analysis was conducted using the existing air temperature data at 100 points in and near the city of Tokyo. As a result, five patterns were obtained, i.e., central city, sea/land water affecting zone, thickly settled suburbs, garden city, and countryside. Each one point was selected in each pattern, to measure the underground temperature. It was found that the effect of HI can be easily evaluated from the underground temperature. It was suggested that the HI effect in the central city is estimated to be around 3.6 {degree}C. The measures mitigating HI were divided into the thermal balance improvement in the whole district and the temperature improvement of living space by homogenization or inhomogenization. Energy conservation was investigated for improving the thermal balance which can be practically conducted. According to the measures, it was found that the air temperature in the central city can be decreased by about 0.5 {degree}C at maximum. 3 figs., 1 tab.

  17. Summer in the City - Assessing and Communicating the Richmond, VA Urban Heat Island to the Public and Policymakers

    Science.gov (United States)

    Hoffman, J. S.; Maurakis, E. G.; Shandas, V.

    2017-12-01

    The local impacts of global climate change are generally underestimated or misunderstood by the public and policymakers as far-off, future problems. However, differential and regional surface warming trends are exacerbated in urban areas due to the radiative properties of impervious surfaces like buildings and roads relative to natural landscapes. Decades of research illustrate that this unnatural radiative imbalance in the built environment gives rise to the well-studied urban heat island effect, whereby air temperatures in urban areas are several degrees warmer than in surrounding non-urbanized areas. In this way, the urban heat island effect presents a unique opportunity to highlight the human influence on Earth systems and at the same time mobilize local community-scale action to mitigate and become resilient to climate change impacts on tangible, experiential time scales. However, public stakeholders, city planners, and policymakers may view the urban heat island effect and its mitigation strategies through varying degrees of climatological, public health, and urban development knowledge and interest. This variation in stakeholder engagement highlights the need for individualized science communication strategies for each audience in order to maximize understanding of the scientific outcomes and tactics for mitigating the urban heat island effect. The City of Richmond, Virginia is currently developing a climate action plan as part of their greenhouse gas emission reduction initiative, RVAgreen 2050, and its recently announced "Richmond 300," a 20-year city development master plan. These initiatives provide the policy backdrop for a public and stakeholder education campaign centered on communicating urban heat island effects and resilience strategies. As such, the Science Museum of Virginia led the city's first urban heat island assessment using citizen science and leveraging a network of local university, non-profit, and city government stakeholders. Here, we

  18. Assessment of urban heat Island for Craiova from satellite-based LST

    Science.gov (United States)

    Udristioiu, Mihaela Tinca; Velea, Liliana; Bojariu, Roxana; Sararu, Silviu Constantin

    2017-12-01

    The urban heat island is defined as an excess of heating in urban areas compared with surrounding rural zones which is illustrated by higher surface and air temperatures in the inner part of the cities. The aim of this study is to identify the UHI effect for Craiova - the largest city in the South-Western part of Romania - and to assess its intensity during summer. To this end, MODIS Land surface temperature (LST) for day and night for summer months (June, July, August), in the interval 2002-2017, as well as yearly Land Cover Type (LCT) data also from MODIS were employed. Furthermore, measurements of air and soil temperature from meteorological station Craiova, available from the National Meteorological Administration database, were used to investigate their relation with LST. The analysis shows that in the urban area of Craiova the long-term summer mean LST is about 4 °C (2 °C), higher than in the rural area during daytime (nighttime). During high temperatures episodes, the mean daytime LST reaches 45-47 °C in the city, while the difference from the rural surrounding area is of 2-3 °C. A high correlation (0.77-0.83) is found between LST and air temperature for all land-use types in the area considered. Both LST and 2m-air temperature time-series manifest an increasing linear tendency over the period considered, being more pronounced during the day.

  19. The Conundrum of Impacts of Climate Change on Urbanization and the Urban Heat Island Effect

    Science.gov (United States)

    Quattrochi, Dale A.

    2011-01-01

    The twenty-first century is the first urban century according to the United Nations Development Program. The focus on cities reflects awareness of the growing percentage of the world's population that lives in urban areas. In 2000, approximately 3 billion people representing about 40% of the global population resided in urban areas. The United Nations estimates that by 2025, 60% of the world s population will live in urban areas. As a consequence, the number of megacities (those cities with populations of 10 million inhabitants or more) will increase by 100 by 2025. Thus, there is a critical need to understand the spatial growth of urban areas and what the impacts are on the environment. Moreover, there is a critical need to assess how under global climate change, cities will affect the local, regional, and even global climate. As urban areas increase in size, it is anticipated there will be a concomitant growth of the Urban Heat Island effect (UHI), and the attributes that are related to its spatial and temporal dynamics. Therefore, how climate change, including the dynamics of the UHI, will affect the urban environment, must be explored to help mitigate potential impacts on the environment (e.g., air quality, heat stress, vectorborne disease) and on human health and well being, to develop adaptation schemes to cope with these impacts.

  20. The urban heat island of a city in an arid zone: the case of Eilat, Israel

    Science.gov (United States)

    Sofer, M.; Potchter, O.

    2006-05-01

    This study presents the results of a preliminary research that was conducted in the city of Eilat, located in an extreme hot and arid zone on the northern coast of the Red Sea. The purpose was to analyse the characteristics of the local urban heat island (UHI). Diurnal pre-dawn and early-afternoon measurements were taken in winter and summer weather conditions on three separate occasions for two consecutive years. The results show the development of a moderate UHI located around the most intensive area of human activity; the city business centre and dense hotel belt. The UHI is more significant at midday during the summer period, while early morning inversions in winter have a weakening effect on the UHI intensity. It was found that the topography and wind regime have a dominant effect on the location and intensity of the UHI, while the sea has a very marginal effect. Due to the UHI influences on the spatial distribution of the heat stress in the city, it is suggested that further applied UHI research should be focused on the summer period.

  1. Mitigating the surface urban heat island: Mechanism study and sensitivity analysis

    Science.gov (United States)

    Meng, Chunlei

    2017-08-01

    In a surface urban heat island (SUHI), the urban land surface temperature (LST) is usually higher than the temperature of the surrounding rural areas due to human activities and surface characteristics. Because a SUHI has many adverse impacts on urban environment and human health, SUHI mitigation strategies are very important. This paper investigates the mechanism of a SUHI based on the basic physical laws that control the formation of a SUHI; five mitigation strategies are proposed, namely: sprinkling and watering; paving a pervious surface; reducing the anthropogenic heat (AH) release; using a "white roof"; increasing the fractional vegetation cover or leaf area index (LAI). To quantify the effect of these mitigation strategies, 26 sets of experiments are designed and implemented by running the integrated urban land model (IUM). The results of the sensitivity analysis indicate that sprinkling and watering is an effective measure for mitigating a SUHI for an entire day. Decreasing the AH release is also useful for both night- and daytime SUHI mitigation; however, the cooling extent is proportional to the diurnal cycle of AH. Increasing the albedo can reduce the LST in the daytime, especially when the solar radiation is significant; the cooling extent is approximately proportional to the diurnal cycle of the net radiation. Increasing the pervious surface percentage can mitigate the SUHI especially in the daytime. Increasing the fractional vegetation cover can mitigate the SUHI in the daytime but may aggravate the SUHI at night.

  2. Remote Sensing of the Urban Heat Island Effect Across Biomes in the Continental USA

    Science.gov (United States)

    Imhoff, Marc L.; Zhang, Ping; Wolfe, Robert E.; Bounoua, Lahouari

    2010-01-01

    Impervious surface area (ISA) from the Landsat TM-based NLCD 2001 dataset and land surface temperature (LST) from MODIS averaged over three annual cycles (2003-2005) are used in a spatial analysis to assess the urban heat island (UHI) skin temperature amplitude and its relationship to development intensity, size, and ecological setting for 38 of the most populous cities in the continental United States. Development intensity zones based on %ISA are defined for each urban area emanating outward from the urban core to the nonurban rural areas nearby and used to stratify sampling for land surface temperatures and NDVI. Sampling is further constrained by biome and elevation to insure objective intercomparisons between zones and between cities in different biomes permitting the definition of hierarchically ordered zones that are consistent across urban areas in different ecological setting and across scales. We find that ecological context significantly influences the amplitude of summer daytime UHI (urban-rural temperature difference) the largest (8 C average) observed for cities built in biomes dominated by temperate broadleaf and mixed forest. For all cities combined, ISA is the primary driver for increase in temperature explaining 70% of the total variance in LST. On a yearly average, urban areas are substantially warmer than the non-urban fringe by 2.9 C, except for urban areas in biomes with arid and semiarid climates. The average amplitude of the UHI is remarkably asymmetric with a 4.3 C temperature difference in summer and only 1.3 C in winter. In desert environments, the LST's response to ISA presents an uncharacteristic "U-shaped" horizontal gradient decreasing from the urban core to the outskirts of the city and then increasing again in the suburban to the rural zones. UHI's calculated for these cities point to a possible heat sink effect. These observational results show that the urban heat island amplitude both increases with city size and is seasonally

  3. Does Artificial Ascites Induce the Heat-Sink Phenomenon during Percutaneous Radiofrequency Ablation of the Hepatic Subcapsular Area?: an in vivo Experimental Study Using a Rabbit Model

    International Nuclear Information System (INIS)

    Kim, Young Sun; Rhim, Hyun Chul; Choi, Dong Il; Lim, Hyo K.

    2009-01-01

    To evaluate the effect of the heat-sink phenomenon induced by artificial ascites on the size of the ablation zone during percutaneous radiofrequency (RF) ablation of the hepatic subcapsular area in an in vivo rabbit model. A total of 21 percutaneous rabbit liver RF ablations were performed with and without artificial ascites (5% dextrose aqueous solution). The rabbits were divided into three groups: a) control group (C, n = 7); b) room temperature ascites group (R, n = 7); and c) warmed ascites group (W, n = 7). The tip of a 1 cm, internally cooled electrode was placed on the subcapsular region of the hepatic dome via ultrasound guidance, and ablation was continued for 6 min. Changes in temperature of the ascites were monitored during the ablation. The size of the ablation zones of the excised livers and immediate complications rates were compared statistically between the groups (Mann-Whitney U test, Kruskal-Wallis test, linear-by-linear association, p = 0.05). One rabbit from the 'W' group expired during the procedure. In all groups, the ascites temperatures approached their respective body temperatures as the ablations continued; however, a significant difference in ascites temperature was found between groups 'W' and 'R' throughout the procedures (39.2± 0.4 .deg. C in group W and 33.4±4.3 .deg. C in group R at 6 min, p = 0.003). No significant difference was found between the size of the ablation zones (782.4±237.3 mL in group C, 1,172.0±468.9 mL in group R, and 1,030.6±665.1 mL in group W, p = 0.170) for the excised liver specimens. Diaphragmatic injury was identified in three of seven cases (42.9%) upon visual inspection of group 'C' rabbits (p = 0.030). Artificial ascites are not likely to cause a significant heat-sink phenomenon in the percutaneous RF ablation of the hepatic subcapsular region

  4. Does artificial ascites induce the heat-sink phenomenon during percutaneous radiofrequency ablation of the hepatic subcapsular area?: an in vivo experimental study using a rabbit model.

    Science.gov (United States)

    Kim, Young Sun; Rhim, Hyunchul; Choi, Dongil; Lim, Hyo K

    2009-01-01

    To evaluate the effect of the heat-sink phenomenon induced by artificial ascites on the size of the ablation zone during percutaneous radiofrequency (RF) ablation of the hepatic subcapsular area in an in vivo rabbit model. A total of 21 percutaneous rabbit liver RF ablations were performed with and without artificial ascites (5% dextrose aqueous solution). The rabbits were divided into three groups: a) control group (C, n = 7); b) room temperature ascites group (R, n = 7); and c) warmed ascites group (W, n = 7). The tip of a 1 cm, internally cooled electrode was placed on the subcapsular region of the hepatic dome via ultrasound guidance, and ablation was continued for 6 min. Changes in temperature of the ascites were monitored during the ablation. The size of the ablation zones of the excised livers and immediate complications rates were compared statistically between the groups (Mann-Whitney U test, Kruskal-Wallis test, linear-by-linear association, p = 0.05). One rabbit from the "W" group expired during the procedure. In all groups, the ascites temperatures approached their respective body temperatures as the ablations continued; however, a significant difference in ascites temperature was found between groups "W" and "R" throughout the procedures (39.2+/-0.4 degrees C in group W and 33.4+/-4.3 degrees C in group R at 6 min, p = 0.003). No significant difference was found between the size of the ablation zones (782.4+/-237.3 mL in group C, 1,172.0+/-468.9 mL in group R, and 1,030.6+/-665.1 mL in group W, p = 0.170) for the excised liver specimens. Diaphragmatic injury was identified in three of seven cases (42.9%) upon visual inspection of group "C" rabbits (p = 0.030). Artificial ascites are not likely to cause a significant heat-sink phenomenon in the percutaneous RF ablation of the hepatic subcapsular region.

  5. Assessing the effect of wind speed/direction changes on urban heat island intensity of Istanbul.

    Science.gov (United States)

    Perim Temizoz, Huriye; Unal, Yurdanur S.

    2017-04-01

    Assessing the effect of wind speed/direction changes on urban heat island intensity of Istanbul. Perim Temizöz, Deniz H. Diren, Cemre Yürük and Yurdanur S. Ünal Istanbul Technical University, Department of Meteorological Engineering, Maslak, Istanbul, Turkey City or metropolitan areas are significantly warmer than the outlying rural areas since the urban fabrics and artificial surfaces which have different radiative, thermal and aerodynamic features alter the surface energy balance, interact with the regional circulation and introduce anthropogenic sensible heat and moisture into the atmosphere. The temperature contrast between urban and rural areas is most prominent during nighttime since heat is absorbed by day and emitted by night. The intensity of the urban heat island (UHI) vary considerably depending on the prevailent meteorological conditions and the characteristics of the region. Even though urban areas cover a small fraction of Earth, their climate has greater impact on the world's population. Over half of the world population lives in the cities and it is expected to rise within the coming decades. Today almost one fifth of the Turkey's population resides in Istanbul with the percentage expected to increase due to the greater job opportunities compared to the other cities. Its population has been increased from 2 millions to 14 millions since 1960s. Eventually, the city has been expanded tremendously within the last half century, shifting the landscape from vegetation to built up areas. The observations of the last fifty years over Istanbul show that the UHI is most pronounced during summer season. The seasonal temperature differences between urban and suburban sites reach up to 3 K and roughly haft degree increase in UHI intensity is observed after 2000. In this study, we explore the possible range of heat load and distribution over Istanbul for different prevailing wind conditions by using the non-hydrostatic MUKLIMO3 model developed by DWD

  6. Roles of Urban Tree Canopy and Buildings in Urban Heat Island Effects: Parameterization and Preliminary Results

    Science.gov (United States)

    Loughner, Christopher P.; Allen, Dale J.; Zhang, Da-Lin; Pickering, Kenneth E.; Dickerson, Russell R.; Landry, Laura

    2012-01-01

    Urban heat island (UHI) effects can strengthen heat waves and air pollution episodes. In this study, the dampening impact of urban trees on the UHI during an extreme heat wave in the Washington, D.C., and Baltimore, Maryland, metropolitan area is examined by incorporating trees, soil, and grass into the coupled Weather Research and Forecasting model and an urban canopy model (WRF-UCM). By parameterizing the effects of these natural surfaces alongside roadways and buildings, the modified WRF-UCM is used to investigate how urban trees, soil, and grass dampen the UHI. The modified model was run with 50% tree cover over urban roads and a 10% decrease in the width of urban streets to make space for soil and grass alongside the roads and buildings. Results show that, averaged over all urban areas, the added vegetation decreases surface air temperature in urban street canyons by 4.1 K and road-surface and building-wall temperatures by 15.4 and 8.9 K, respectively, as a result of tree shading and evapotranspiration. These temperature changes propagate downwind and alter the temperature gradient associated with the Chesapeake Bay breeze and, therefore, alter the strength of the bay breeze. The impact of building height on the UHI shows that decreasing commercial building heights by 8 m and residential building heights by 2.5 m results in up to 0.4-K higher daytime surface and near-surface air temperatures because of less building shading and up to 1.2-K lower nighttime temperatures because of less longwave radiative trapping in urban street canyons.

  7. Urban Heat Island Versus Air Quality - a Numerical Modelling Study for a European City

    Science.gov (United States)

    Fallmann, J.; Forkel, R.; Emeis, S.

    2014-12-01

    In 2050 70% of the global population is expected to live in urban areas. Climate change will render these areas more vulnerable to heat waves, which often are accompanied by severe air pollution problems. The Urban Heat Island (UHI) is a feature that adds to the general temperature increase that is expected. Decreasing the UHI can impact air quality as well, because heat influences atmospheric dynamics and accelerates air chemical processes and often also increases the emission of primary pollutants due to increased demand of energy. The goal of this study is to investigate the effect of, e.g., high reflective surfaces and urban greening on mitigating the UHI and the related impact on air quality. A multi-layer urban canopy model is coupled to the mesoscale model WRF-Chem and the urban area of Stuttgart (South-West Germany) is taken as one example. Different scenario runs are executed for short time periods and are compared to a control run. The results show that the UHI effect can be substantially reduced when changing the albedo of roof surfaces, whereas the effect of urban greening is minor. Both scenarios have in common, that they evoke changes in secondary circulation patterns. The effects of these mitigation strategies on chemical composition of the urban atmosphere are complex, attributed to both chemical and dynamical features. Increasing the reflectivity of roof surfaces in the model results in a net decrease of the surface ozone concentration, because ozone formation is highly correlated to temperature. With regard to primary pollutants, e.g. NO, CO and PM10 concentrations are increased when increasing reflectivity. This effect primarily can be ascribed to a reduction of turbulent motion, convection and a decrease of the boundary layer height, coming along with lower temperatures in the urban canopy layer due to increased reflectivity. The table below shows the effect on grid cell mean concentrations for different chemical species and scenarios.

  8. Spatially Analyzing the Inequity of the Hong Kong Urban Heat Island by Socio-Demographic Characteristics

    Directory of Open Access Journals (Sweden)

    Man Sing Wong

    2016-03-01

    Full Text Available Recent studies have suggested that some disadvantaged socio-demographic groups face serious environmental-related inequities in Hong Kong due to the rising ambient urban temperatures. Identifying heat-vulnerable groups and locating areas of Surface Urban Heat Island (SUHI inequities is thus important for prioritizing interventions to mitigate death/illness rates from heat. This study addresses this problem by integrating methods of remote sensing retrieval, logistic regression modelling, and spatial autocorrelation. In this process, the SUHI effect was first estimated from the Land Surface Temperature (LST derived from a Landsat image. With the scale assimilated to the SUHI and socio-demographic data, a logistic regression model was consequently adopted to ascertain their relationships based on Hong Kong Tertiary Planning Units (TPUs. Lastly, inequity “hotspots” were derived using spatial autocorrelation methods. Results show that disadvantaged socio-demographic groups were significantly more prone to be exposed to an intense SUHI effect: over half of 287 TPUs characterized by age groups of 60+ years, secondary and matriculation education attainment, widowed, divorced and separated, low and middle incomes, and certain occupation groups of workers, have significant Odds Ratios (ORs larger than 1.2. It can be concluded that a clustering analysis stratified by age, income, educational attainment, marital status, and occupation is an effective way to detect the inequity hotspots of SUHI exposure. Additionally, inequities explored using income, marital status and occupation factors were more significant than the age and educational attainment in these areas. The derived maps and model can be further analyzed in urban/city planning, in order to mitigate the physical and social causes of the SUHI effect.

  9. Effect of urbanization activities towards the formation of urban heat island in Cameron Highlands, Malaysia

    Science.gov (United States)

    Ibrahim, M. H.; Latiff, N. A. A.; Ismail, K.; Isa, N. K. M.

    2018-04-01

    This study carried out to study the effect of urbanization activities towards the formation of Urban Heat Islands (UHI) in Cameron Highlands (CH).The aim of this study is to identify the formation of UHI in CH following the urbanization activities. This study also involved two main data that are primary through field survey and secondary data from collection data. In addition, this study was used qualitative and quantitative method. The data was taken two times a day, at a day and night between the hours of 12:00 to 14:00 and 19:00 to 21:00. Data in this study analyzed by using correlation analysis and analysis of Geographic Information Systems (GIS) which known as interpolation. Result found the formation of UHI in CH was concentrated at city centre namely in Pekan Tanah Rata. From the whole average value, city centre was recorded the highest reading of temperatures which is 30.5°C, while reading of temperature for subtown and suburban was recorded 28.6°C and 23.8°C. Average of humidity in CH during the day was recorded as highest reading in the suburban area namely Tringkap Bee Farm (station 11) which is 58.4%. Then, average of humidity in CH at night was recorded highest reading in the suburban area namely Habu Mini Market 91 (station 9) which the value is 83.2%. The reading of wind speed in CH during the day recorded the highest reading day at the suburban namely Tringkap Bee Farm (station 11) which the value is 2.3 m/s. While, following the reading of wind speed in CH at night, suburban namely Habu Mini Market 91(station 9) was recorded the highest reading which is 0.8 m/s. The Intensity of Urban Heat Island in CH during the day was recorded 2.8°C, while at night intensity of UHI was recorded 1.4°C. Overall, the urbanization activities in CH had caused the formation of UHI. Therefore, measures of legislation such as protect forest from development by control the urbanization activities need to be implemented so that the formation of UHI can be reduced and

  10. Suburban heat island effect in groundwater energy utilisation in Nordic climate - case study

    Science.gov (United States)

    Arola, Teppo

    2017-04-01

    We present the preliminary results from the initial thermogeological characterization of Finland's first-ever planned large-scale aquifer thermal energy storage (ATES) facility. The site is located in the Asko area (Lahti), at a latitude of 60°59'N. In particular, emphasis is put on the results from an aquifer's pumping test performed in July / August 2016 to investigate the potential implication of suburban heat island (SUHI) effect to ATES system on the naturally cold groundwater area. The site has been under geological investigation since July 2015. At a regional scale, the groundwater's natural temperature is about 5.8- 6°C. However, preliminary measurements during the investigations revealed that local groundwater temperature ranged between 7.5 to 8.7 °C in Asko area. The highest temperature was observed underneath buildings, suggesting that higher-than-average temperature is most likely influenced due to anthropogenic heat flux into the ground. The pumping test was performed for 39 days, of which 28 days with groundwater withdrawal and 11 days of heads recovery. The pumped volumes range from 350 to 540 m3/d leading the total volume of 10400 m3 of groundwater. Groundwater temperatures were continuously measured from pumping test well and two observation piezometers during the entire test. The results indicated that aquifer's temperature remained nearly constant being between 7.4 to 7.9 °C during the test period. Heat pulses with temperature variation of 0.1 to 0.3 °C were observed in the pumping well and nearest monitoring well (19 meters from pumping well) during the pumping test and recovery phase. We estimate that the pulses were due to rapidly changed groundwater flowing conditions and pulse indicate "new groundwater" flow to the well. Overall, the preliminary test suggests that groundwater temperature are expected to remain elevated during the ATES system operation. Elevated temperature due the SUHI effect increases groundwater heating potential

  11. A new structure of permeable pavement for mitigating urban heat island.

    Science.gov (United States)

    Liu, Yong; Li, Tian; Peng, Hangyu

    2018-09-01

    The urban heat island (UHI) effect has been a great threat to human habitation, and how to mitigate this problem has been a global concern over decades. This paper addresses the cooling effect of a novel permeable pavement called evaporation-enhancing permeable pavement, which has capillary columns in aggregate and a liner at the bottom. To explore the efficiency of mitigating the UHI, bench-scale permeable pavement units with capillary columns were developed and compared with conventional permeable pavement. Criteria of capillary capacities of the column, evaporation rates, and surface temperature of the pavements were monitored under simulated rainfall and Shanghai local weather conditions. Results show the capillary column was important in increasing evaporation by lifting water from the bottom to the surface, and the evaporation-enhancing permeable pavement was cooler than a conventional permeable pavement by as much as 9.4°C during the experimental period. Moreover, the cooling effect of the former pavement could persist more than seven days under the condition of no further rainfall. Statistical analysis result reveals that evaporation-enhancing permeable pavement can mitigate the UHI effect significantly more than a conventional permeable pavement. Copyright © 2018 Elsevier B.V. All rights reserved.

  12. Assessing the relationship between surface urban heat islands and landscape patterns across climatic zones in China.

    Science.gov (United States)

    Yang, Qiquan; Huang, Xin; Li, Jiayi

    2017-08-24

    The urban heat island (UHI) effect exerts a great influence on the Earth's environment and human health and has been the subject of considerable attention. Landscape patterns are among the most important factors relevant to surface UHIs (SUHIs); however, the relationship between SUHIs and landscape patterns is poorly understood over large areas. In this study, the surface UHI intensity (SUHII) is defined as the temperature difference between urban and suburban areas, and the landscape patterns are quantified by the urban-suburban differences in several typical landscape metrics (ΔLMs). Temperature and land-cover classification datasets based on satellite observations were applied to analyze the relationship between SUHII and ΔLMs in 332 cities/city agglomerations distributed in different climatic zones of China. The results indicate that SUHII and its correlations with ΔLMs are profoundly influenced by seasonal, diurnal, and climatic factors. The impacts of different land-cover types on SUHIs are different, and the landscape patterns of the built-up and vegetation (including forest, grassland, and cultivated land) classes have the most significant effects on SUHIs. The results of this study will help us to gain a deeper understanding of the relationship between the SUHI effect and landscape patterns.

  13. Landscape Classifications for Landscape Metrics-based Assessment of Urban Heat Island: A Comparative Study

    International Nuclear Information System (INIS)

    Zhao, X F; Deng, L; Wang, H N; Chen, F; Hua, L Z

    2014-01-01

    In recent years, some studies have been carried out on the landscape analysis of urban thermal patterns. With the prevalence of thermal landscape, a key problem has come forth, which is how to classify thermal landscape into thermal patches. Current researches used different methods of thermal landscape classification such as standard deviation method (SD) and R method. To find out the differences, a comparative study was carried out in Xiamen using a 20-year winter time-serial Landsat images. After the retrieval of land surface temperature (LST), the thermal landscape was classified using the two methods separately. Then landscape metrics, 6 at class level and 14 at landscape level, were calculated and analyzed using Fragstats 3.3. We found that: (1) at the class level, all the metrics with SD method were evened and did not show an obvious trend along with the process of urbanization, while the R method could. (2) While at the landscape level, 6 of the 14 metrics remains the similar trends, 5 were different at local turn points of the curve, 3 of them differed completely in the shape of curves. (3) When examined with visual interpretation, SD method tended to exaggerate urban heat island effects than the R method

  14. TREND ASSESSMENT OF SPATIO-TEMPORAL CHANGE OF TEHRAN HEAT ISLAND USING SATELLITE IMAGES

    Directory of Open Access Journals (Sweden)

    M. R. Saradjian

    2015-12-01

    Full Text Available Numerous investigations on Urban Heat Island (UHI show that land cover change is the main factor of increasing Land Surface Temperature (LST in urban areas, especially conversion of vegetation and bare soil to concrete, asphalt and other man-made structures. On the other hand, other human activities like those which cause to burning fossil fuels, that increase the amount of carbon dioxide, may raise temperature in global scale in comparison with small scales (urban areas. In this study, multiple satellite images with different spatial and temporal resolutions have been used to determine Land Surface Temperature (LST variability in Tehran metropolitan area. High temporal resolution of AVHRR images have been used as the main data source when investigating temperature variability in the urban area. The analysis shows that UHI appears more significant at afternoon and night hours. But the urban class temperature is almost equal to its surrounding vegetation and bare soil classes at around noon. It also reveals that there is no specific difference in UHI intense during the days throughout the year. However, it can be concluded that in the process of city expansion in years, UHI has been grown both spatially and in magnitude. In order to locate land-cover types and relate them to LST, Thematic Mapper (TM images have been exploited. The influence of elevation on the LST has also been studied, using digital elevation model derived from SRTM database.

  15. Quality and sensitivity of high-resolution numerical simulation of urban heat islands

    Science.gov (United States)

    Li, Dan; Bou-Zeid, Elie

    2014-05-01

    High-resolution numerical simulations of the urban heat island (UHI) effect with the widely-used Weather Research and Forecasting (WRF) model are assessed. Both the sensitivity of the results to the simulation setup, and the quality of the simulated fields as representations of the real world, are investigated. Results indicate that the WRF-simulated surface temperatures are more sensitive to the planetary boundary layer (PBL) scheme choice during nighttime, and more sensitive to the surface thermal roughness length parameterization during daytime. The urban surface temperatures simulated by WRF are also highly sensitive to the urban canopy model (UCM) used. The implementation in this study of an improved UCM (the Princeton UCM or PUCM) that allows the simulation of heterogeneous urban facets and of key hydrological processes, together with the so-called CZ09 parameterization for the thermal roughness length, significantly reduce the bias (Changing UCMs and PBL schemes does not alter the performance of WRF in reproducing bulk boundary layer temperature profiles significantly. The results illustrate the wide range of urban environmental conditions that various configurations of WRF can produce, and the significant biases that should be assessed before inferences are made based on WRF outputs. The optimal set-up of WRF-PUCM developed in this paper also paves the way for a confident exploration of the city-scale impacts of UHI mitigation strategies in the companion paper (Li et al 2014).

  16. Spatiotemporal Variation in Surface Urban Heat Island Intensity and Associated Determinants across Major Chinese Cities

    Directory of Open Access Journals (Sweden)

    Juan Wang

    2015-03-01

    Full Text Available Urban heat islands (UHIs created through urbanization can have negative impacts on the lives of people living in cities. They may also vary spatially and temporally over a city. There is, thus, a need for greater understanding of these patterns and their causes. While previous UHI studies focused on only a few cities and/or several explanatory variables, this research provides a comprehensive and comparative characterization of the diurnal and seasonal variation in surface UHI intensities (SUHIIs across 67 major Chinese cities. The factors associated with the SUHII were assessed by considering a variety of related social, economic and natural factors using a regression tree model. Obvious seasonal variation was observed for the daytime SUHII, and the diurnal variation in SUHII varied seasonally across China. Interestingly, the SUHII varied significantly in character between northern and southern China. Southern China experienced more intense daytime SUHIIs, while the opposite was true for nighttime SUHIIs. Vegetation had the greatest effect in the day time in northern China. In southern China, annual electricity consumption and the number of public buses were found to be important. These results have important theoretical significance and may be of use to mitigate UHI effects.

  17. Spatio-Temporal Variability of Urban Heat Island and Urban Mobility

    Science.gov (United States)

    Kar, B.; Omitaomu, O.

    2017-12-01

    A 2016 report by the U.S. Census stated that while the rural areas cover 97% of the U.S. landmass, these areas house only 19.7% of the nation's population. Given that the U.S. coastal counties are home to more than 50% of the U.S. population, these urban areas are clustered along the coast that is susceptible to sea level rise induced impacts. In light of increasing climate variability and extreme events, it is pertinent to understand the Urban Heat Island (UHI) effect that results from increasing population density and mobility in the urban areas, and that contributes to increased energy consumption and temperature as well as unmitigated flooding events. For example, in Illinois, warmer summers contribute to heavy precipitation that overwhelms the region's drainage capacity. This study focuses on understanding the spatio-temporal variability of the relationship between population density and mobility distribution, and creation of UHI due to temperature change in selected cities across the U.S. This knowledge will help us understand the role of UHI in energy-water nexus in urban areas, specifically, energy consumption.

  18. Dynamic analysis and ecological evaluation of urban heat islands in Raipur city, India

    Science.gov (United States)

    Guha, Subhanil; Govil, Himanshu; Mukherjee, Sandip

    2017-07-01

    Spatial-temporal distribution of the urban heat islands (UHI) and their changes over Raipur city have been analyzed using multitemporal Landsat satellite data from 1995 to 2016. Land surface temperature (LST) was retrieved through a mono-window algorithm. Some selected land use/land cover (LU-LC) indices were analyzed with LST using linear regression. The urban thermal field variance index (UTFVI) was applied to measure the thermal comfort level of the city. Results show that during the observed period, the study area experienced a gradual increasing rate in mean LST (>1% per annum). The UHI developed especially along the north-western industrial area and south-eastern bare land of the city. A difference in mean LST between UHI and non-UHI for different time periods (2.6°C in 1995, 2.85°C in 2006, 3.42°C in 2009, and 3.63°C in 2016) reflects the continuous warming status of the city. The LST map also shows the existence of a few urban hot spots near the industrial areas, metal roofs, and high density transport parking lots, which are more abundant in the north-western part of the city. The UTFVI map associated with UHI indicates that the inner parts of the city are ecologically more comfortable than the outer peripheries.

  19. Spatio-temporal variance and meteorological drivers of the urban heat island in a European city

    Science.gov (United States)

    Arnds, Daniela; Böhner, Jürgen; Bechtel, Benjamin

    2017-04-01

    Urban areas are especially vulnerable to high temperatures, which will intensify in the future due to climate change. Therefore, both good knowledge about the local urban climate as well as simple and robust methods for its projection are needed. This study has analysed the spatio-temporal variance of the mean nocturnal urban heat island (UHI) of Hamburg, with observations from 40 stations from different suppliers. The UHI showed a radial gradient with about 2 K in the centre mostly corresponding to the urban densities. Temporarily, it has a strong seasonal cycle with the highest values between April and September and an inter-annual variability of approximately 0.5 K. Further, synoptic meteorological drivers of the UHI were analysed, which generally is most pronounced under calm and cloud-free conditions. Considered were meteorological parameters such as relative humidity, wind speed, cloud cover and objective weather types. For the stations with the highest UHI intensities, up to 68.7 % of the variance could be explained by seasonal empirical models and even up to 76.6 % by monthly models.

  20. Shifting the urban heat island clock in a megacity: a case study of Hong Kong

    Science.gov (United States)

    Chen, Xuan; Jeong, Su-Jong

    2018-01-01

    With increasing levels of urbanization in the near future, understanding the impact of urbanization on urban heat islands (UHIs) is critical to adapting to regional climate and environmental changes. However, our understanding of the UHI effect relies mainly on its intensity or magnitude. The present study evaluates the impact of urbanization on UHI duration changes by comparing three stations with different rates of urbanization, including highly developed and developing urban areas throughout Hong Kong, from 1990-2015. Results show that the 26 year average UHI intensity in highly urbanized regions is much higher than that in developing areas, and the 26 year average of UHI duration is similar. Over the past 25 years, however, UHI duration has increased only in developing urban areas, from 13.59-17.47 hours. Both earlier UHI starting and later UHI ending times concurrently contribute to the UHI effect being experienced for a longer duration. The differences in UHI duration change between the two areas are supported by population and by night light changes from space. Increasing night light, which suggests enhancements in the economic infrastructure, occurred only in the developing urban areas. Our results suggest that changes in UHI duration should be included in an assessment of regional climate change as well as in urban planning in a megacity.

  1. The extent and intensity of the urban heat island in Iași city, Romania

    Science.gov (United States)

    Sfîcă, Lucian; Ichim, Pavel; Apostol, Liviu; Ursu, Adrian

    2017-10-01

    The study underlines the characteristics of the urban heat island of Iași (Iași's UHI) on the basis of 3 years of air temperature measurements obtained by fixed-point observations. We focus on the identification of UHI development and intensity as it is expressed by the temperature differences between the city centre and the rural surroundings. Annual, seasonal and daily characteristics of Iaşi's UHI are investigated at the level of the classical weather observation. In brief, an intensity of 0.8 °C of UHI and a spatial extension which corresponds to the densely built area of the city were delineated. The Iaşi UHI is stronger during summer calm nights—when the inner city is warmer with 2.5-3 °C than the surroundings—and is weaker during windy spring days. The specific features of Iași's UHI bear a profound connection to the specificity of the urban structure, the high atmospheric stability in the region and the local topography. Also, the effects of Iași's UHI upon some environmental aspects are presented as study cases. For instance, under the direct influence of UHI, we have observed that in the city centre, the apricot tree blossoms earlier (with up to 4 days) and the depth of the snow cover is significantly lower (with up to 10 cm for a rural snow depth of 30 cm) than in the surrounding areas.

  2. Soil surface temperatures reveal moderation of the urban heat island effect by trees and shrubs.

    Science.gov (United States)

    Edmondson, J L; Stott, I; Davies, Z G; Gaston, K J; Leake, J R

    2016-09-19

    Urban areas are major contributors to air pollution and climate change, causing impacts on human health that are amplified by the microclimatological effects of buildings and grey infrastructure through the urban heat island (UHI) effect. Urban greenspaces may be important in reducing surface temperature extremes, but their effects have not been investigated at a city-wide scale. Across a mid-sized UK city we buried temperature loggers at the surface of greenspace soils at 100 sites, stratified by proximity to city centre, vegetation cover and land-use. Mean daily soil surface temperature over 11 months increased by 0.6 °C over the 5 km from the city outskirts to the centre. Trees and shrubs in non-domestic greenspace reduced mean maximum daily soil surface temperatures in the summer by 5.7 °C compared to herbaceous vegetation, but tended to maintain slightly higher temperatures in winter. Trees in domestic gardens, which tend to be smaller, were less effective at reducing summer soil surface temperatures. Our findings reveal that the UHI effects soil temperatures at a city-wide scale, and that in their moderating urban soil surface temperature extremes, trees and shrubs may help to reduce the adverse impacts of urbanization on microclimate, soil processes and human health.

  3. Urban Heat Island Growth Modeling Using Artificial Neural Networks and Support Vector Regression: A case study of Tehran, Iran

    Science.gov (United States)

    Sherafati, Sh. A.; Saradjian, M. R.; Niazmardi, S.

    2013-09-01

    Numerous investigations on Urban Heat Island (UHI) show that land cover change is the main factor of increasing Land Surface Temperature (LST) in urban areas. Therefore, to achieve a model which is able to simulate UHI growth, urban expansion should be concerned first. Considerable researches on urban expansion modeling have been done based on cellular automata. Accordingly the objective of this paper is to implement CA method for trend detection of Tehran UHI spatiotemporal growth based on urban sprawl parameters (such as Distance to nearest road, Digital Elevation Model (DEM), Slope and Aspect ratios). It should be mentioned that UHI growth modeling may have more complexities in comparison with urban expansion, since the amount of each pixel's temperature should be investigated instead of its state (urban and non-urban areas). The most challenging part of CA model is the definition of Transfer Rules. Here, two methods have used to find appropriate transfer Rules which are Artificial Neural Networks (ANN) and Support Vector Regression (SVR). The reason of choosing these approaches is that artificial neural networks and support vector regression have significant abilities to handle the complications of such a spatial analysis in comparison with other methods like Genetic or Swarm intelligence. In this paper, UHI change trend has discussed between 1984 and 2007. For this purpose, urban sprawl parameters in 1984 have calculated and added to the retrieved LST of this year. In order to achieve LST, Thematic Mapper (TM) and Enhanced Thematic Mapper (ETM+) night-time images have exploited. The reason of implementing night-time images is that UHI phenomenon is more obvious during night hours. After that multilayer feed-forward neural networks and support vector regression have used separately to find the relationship between this data and the retrieved LST in 2007. Since the transfer rules might not be the same in different regions, the satellite image of the city has

  4. Monitoring surface urban heat island formation in a tropical mountain city using Landsat data (1987-2015)

    Science.gov (United States)

    Estoque, Ronald C.; Murayama, Yuji

    2017-11-01

    Since it was first described about two centuries ago and due to its adverse impacts on urban ecological environment and the overall livability of cities, the urban heat island (UHI) phenomenon has been, and still is, an important research topic across various fields of study. However, UHI studies on cities in mountain regions are still lacking. This study aims to contribute to this endeavor by monitoring and examining the formation of surface UHI (SUHI) in a tropical mountain city of Southeast Asia -Baguio City, the summer capital of the Philippines- using Landsat data (1987-2015). Based on mean surface temperature difference between impervious surface (IS) and green space (GS1), SUHI intensity (SUHII) in the study area increased from 2.7 °C in 1987 to 3.4 °C in 2015. Between an urban zone (>86% impervious) and a rural zone (<10% impervious) along the urban-rural gradient, it increased from 4.0 °C in 1987 to 8.2 °C in 2015. These results are consistent with the rapid urbanization of the area over the same period, which resulted in a rapid expansion of impervious surfaces and substantial loss of green spaces. Together with landscape composition variables (e.g. fraction of IS), topographic variables (e.g. hillshade) can help explain a significant amount of spatial variations in surface temperature in the area (R2 = 0.56-0.85) (p < 0.001). The relative importance of the 'fraction of IS' variable also increased, indicating that its unique explanatory and predictive power concerning the spatial variations of surface temperature increases as the city size becomes bigger and SUHI gets more intense. Overall, these results indicate that the cool temperature of the study area being situated in a mountain region did not hinder the formation of SUHI. Thus, the formation and effects of UHIs, including possible mitigation and adaptation measures, should be considered in landscape planning for the sustainable urban development of the area.

  5. Satellite and Ground-Based Sensors for the Urban Heat Island Analysis in the City of Rome

    Directory of Open Access Journals (Sweden)

    Roberto Fabrizi

    2010-05-01

    Full Text Available In this work, the trend of the Urban Heat Island (UHI of Rome is analyzed by both ground-based weather stations and a satellite-based infrared sensor. First, we have developed a suitable algorithm employing satellite brightness temperatures for the estimation of the air temperature belonging to the layer of air closest to the surface. UHI spatial characteristics have been assessed using air temperatures measured by both weather stations and brightness temperature maps from the Advanced Along Track Scanning Radiometer (AATSR on board ENVISAT polar-orbiting satellite. In total, 634 daytime and nighttime scenes taken between 2003 and 2006 have been processed. Analysis of the Canopy Layer Heat Island (CLHI during summer months reveals a mean growth in magnitude of 3–4 K during nighttime and a negative or almost zero CLHI intensity during daytime, confirmed by the weather stations.

  6. Characterization Urban Heat Island Effect and Modelling of Secondary Pollutant Formations at Urban Hotspots

    Science.gov (United States)

    Undi, G. S. N. V. K. S. N. S.

    2017-12-01

    More than 60 percent of the world population is living the urban zones by 2020. This socio of economic transformations will bring considerable changes to the ambient atmosphere. More than 70 percent of the air pollutants in the urban hotspots are from vehicular emissions. in the urban hotspots. In the urban hotspots, the meteorological and dispersion conditions will have different characteristics than in surrounding rural areas. Reactive pollutants transformations are drastically influenced by the local meteorological conditions. The complexity of urban structure alters the pollutants dispersion in the hotspots. This relationship between urban meteorology and air pollution is an important aspect of consideration. In the atmosphere, drastic changes have been noticed from micro to regional and global scales. However, the characteristics of air pollutant emissions vary with time and space, favorable dispersion conditions transport them from local to regional scale. In the present study, the impact of land cover change on Urban Heat Island effect (UHI) has been characterized by considering the three different zones with varying land use patterns. An attempt has been made to estimate the impact of UHI on secondary pollutants (O3) transformations. Envi-Met model has been used to characterize the UHI intensity for the selected zones. Meteorological and air quality measurements were carried out at the selected locations. The diurnal variations of Ozone (O3) concentration for three zones are correlated with the UHI intensity. And the monitoring and model results of O3 concentrations are in good agreement. It is observed from the obtained model results that the metrological parameters influence on local air quality is significant in urban zones.

  7. Quality and sensitivity of high-resolution numerical simulation of urban heat islands

    International Nuclear Information System (INIS)

    Li, Dan; Bou-Zeid, Elie

    2014-01-01

    High-resolution numerical simulations of the urban heat island (UHI) effect with the widely-used Weather Research and Forecasting (WRF) model are assessed. Both the sensitivity of the results to the simulation setup, and the quality of the simulated fields as representations of the real world, are investigated. Results indicate that the WRF-simulated surface temperatures are more sensitive to the planetary boundary layer (PBL) scheme choice during nighttime, and more sensitive to the surface thermal roughness length parameterization during daytime. The urban surface temperatures simulated by WRF are also highly sensitive to the urban canopy model (UCM) used. The implementation in this study of an improved UCM (the Princeton UCM or PUCM) that allows the simulation of heterogeneous urban facets and of key hydrological processes, together with the so-called CZ09 parameterization for the thermal roughness length, significantly reduce the bias (<1.5 °C) in the surface temperature fields as compared to satellite observations during daytime. The boundary layer potential temperature profiles are captured by WRF reasonable well at both urban and rural sites; the biases in these profiles relative to aircraft-mounted senor measurements are on the order of 1.5 °C. Changing UCMs and PBL schemes does not alter the performance of WRF in reproducing bulk boundary layer temperature profiles significantly. The results illustrate the wide range of urban environmental conditions that various configurations of WRF can produce, and the significant biases that should be assessed before inferences are made based on WRF outputs. The optimal set-up of WRF-PUCM developed in this paper also paves the way for a confident exploration of the city-scale impacts of UHI mitigation strategies in the companion paper (Li et al 2014). (letter)

  8. Characterizing Urban Heat Islands of Global Settlements Using MODIS and Nighttime Lights Products

    Science.gov (United States)

    Zhang, Ping; Imhoff, Marc L.; Wolfe, Robert E.; Bounoua, Lahouari

    2010-01-01

    Impervious surface area (ISA) from the National Geophysical Data Center (NGDC) and land surface temperature (LST) from the Moderate Resolution Imaging Spectroradiometer (MODIS) averaged over three annual cycles (2003-2005) are used in a spatial analysis to assess the urban heat island (UHI) signature on LST amplitude and its relationship with development intensity, size, and ecological setting for more than 3000 urban settlements globally. Development intensity zones based on fractional ISA are defined for each urban area emanating outward from the urban core to the nearby nonurban rural areas and used to stratify sampling for LST. Sampling is further constrained by biome type and elevation data to ensure objective intercomparisons between zones and between cities in different biomes. We find that the ecological context and settlement size significantly influence the amplitude of summer daytime UHI. Globally, an average of 3.8 C UHI is found in cities built in biomes dominated by forests; 1.9 C UHI in cities embedded in grass shrubs biomes; and only a weak UHI or sometimes an urban heat sink (UHS) in cities in arid and semi-arid biomes. Overall, the amplitude of the UHI is negatively correlated (R = -0.66) with the difference in vegetation density between urban and rural zones represented by the MODIS normalized difference vegetation index (NDVI). Globally averaged, the daytime UHI amplitude for all settlements is 2.6 C in summer and 1.4 C in winter. Globally, the average summer daytime UHI is 4.7 C for settlements larger than 500 square kilometers compared with 2.5 C for settlements smaller than 50 square kilometers and larger than 10 square kilometers. The stratification of cities by size indicates that the aggregated amount of ISA is the primary driver of UHI amplitude, with variations between ecological contexts and latitudinal zones. More than 60% of the total LST variance is explained by ISA for urban settlements within forests at mid to high latitudes. This

  9. The Impact of Energy Consumption on the Surface Urban Heat Island in China’s 32 Major Cities

    Directory of Open Access Journals (Sweden)

    Weilin Liao

    2017-03-01

    Full Text Available Supported by the rapid economic development in the last few decades, China has become the largest energy consumer in the world. Alongside this, the effect of the anthropogenic heat released from energy consumption is increasingly apparent. We quantified the daytime and nighttime surface urban heat island intensity (SUHII for the 32 major cities in mainland China, using MODIS land surface temperature data from 2008 to 2012, and estimated the energy consumption intensity (ECI based on the correlation between energy consumption and the sum of nighttime lights. On this basis, the impact of energy consumption on the surface urban heat island in China’s 32 major cities was analyzed, by directly examining the relationship between SUHII and the urban-suburban difference in ECI. The results show that energy consumption has a significantly positive correlation with the nighttime SUHII, but no correlation with the daytime SUHII. It indicates that the cities with a larger urban-suburban difference in ECI have a far greater impact on SUHII during the nighttime. Therefore, the statistical analysis of the historical observation data in this study provides evidence for a long-held hypothesis that the anthropogenic heat released from energy consumption is an important contributor to the urban thermal environment.

  10. Daily variation of urban heat island effect and its correlations to urban greenery: A case study of Adelaide

    Directory of Open Access Journals (Sweden)

    Ali Soltani

    2017-12-01

    Full Text Available Urban structure and landscape cause an artificial temperature increase in cities, known as the urban heat island effect. The magnitude of such urban–rural temperature difference varies in daily and seasonal basis. Daily patterns of urban heat accumulation in Adelaide is under investigation. In this paper, East–West air temperature profile of Adelaide metropolitan area was mapped in 60 journeys alongside a straight cross route connecting Adelaide Hills to the West Beach under clear sky between 26 July and 15 August 2013. The most intense urban–rural temperature differences of 5.9 °C occurred during midnight in Adelaide. However, maximum urban heat variation occurred during the late afternoon when the near-surface urban heat fluctuates by 2 °C between the CBD East and Western Parklands. During summer heatwaves, the afternoon heat stress limits public life vibrancy in Adelaide. Increased urban greenery can facilitate resilience to heat by providing shadow and evaporative cooling. A better understanding of daily urban heat variations and the cooling effect of urban greenery assists urban policy making and public life management in the context of climate change.

  11. The Eckert number phenomenon - experimental investigations of heat transfer on moving walls, e.g. rotating cylinders; Das Eckert-Zahl-Phaenomen - Experimentelle Untersuchungen zum Waermeuebergang an einer bewegten Wand am Modellfall eines rotierenden Zylinders

    Energy Technology Data Exchange (ETDEWEB)

    Gschwendtner, M.

    2000-07-01

    The Eckert number phenomenon - theoretically investigated by Geropp in 1969 - describes a turnover in heat transfer at a moving wall at an Eckert number EC=1. This report is the first to confirm the Eckert number phenomenon experimentally. Heat transfer on a heated, vertically rotating cylinder in a crossflow was investigated at extreme rotational speeds, i.e. in the range where the predicted phenomenon will occur. A heating concept had to be developed which allowed an input of heating power independent of rotational speed and which therefore had to be contact-free. The complex thermofluiddynamic processes in the boundary layer around the rotating cylinder were investigated and measured using predominantly optical measuring techniques. The results show that the temperature difference between the wall and the surrounding fluid had a significant effect on the predicted turnover of heat transfer at the wall. Moreover, maximum heat transfer occurs at an Eckert number Ec=0.3, which is of great importance for the cooling of hot surfaces in an airstream. [German] Das Eckert-Zahl-Phaenomen - von Geropp 1969 theoretisch untersucht - beschreibt den Umschlag des Waermeueberganges an einer bewegten Wand bei einer Eckert-ZahlEc{approx}1. In der vorliegenden Arbeit wird das Eckert-Zahl-Phaenomen zum ersten Mal experimentell bestaetigt. Dazu wurde der Waermeuebergang am Modellfall eines queransgestroemten, beheizten, vertikalrotierenden Zylinders untersucht. Aufgrund der fuer die Experimente notwendigen extremen Drehzahlen musste fuer die Zylinderheizung ein Konzept entwickelt werden, das eine beruehrungsfreie und damit drehzahlunabhaengige Leistungseinspeisung erlaubte. Mit vorwiegend optischen Messmethoden wurden die komplexen thermofluiddynamischen Vorgaenge in der Grenzschicht um den rotierenden Zylinder untersucht und vermessen. Die Ergebnisse zeigen u.a., dass die Temperaturdifferenz zwischen Wand und Umgebung von entscheidender Bedeutung fuer die Richtungsumkehr des

  12. Natural Ventilation: A Mitigation Strategy to Reduce Overheating In Buildings under Urban Heat Island Effect in South American Cities

    Science.gov (United States)

    Palme, Massimo; Carrasco, Claudio; Ángel Gálvez, Miguel; Inostroza, Luis

    2017-10-01

    Urban heat island effect often produces an increase of overheating sensation inside of buildings. To evacuate this heat, the current use of air conditioning increases the energy consumption of buildings. As a good alternative, natural ventilation is one of the best strategies to obtain indoor comfort conditions, even in summer season, if buildings and urban designs are appropriated. In this work, the overheating risk of a small house is evaluated in four South American cities: Guayaquil, Lima, Antofagasta and Valparaíso, with and without considering the UHI effect. Then, natural ventilation is assessed in order to understand the capability of this passive strategy to assure comfort inside the house. Results show that an important portion of the indoor heat can be evacuated, however the temperature rising (especially during the night) due to UHI can generate a saturation effect if appropriate technical solutions, like the increase in the air speed that can be obtained with good urban design, are not considered.

  13. CFD prediction of heat island formation on growing Asian cities. Effect of urbanization in Shanghai; Kyodaikasuru Asia no toshi ni okeru heat island keisei ni kansuru CFD yosoku. Shanghai no toshika ga oyobosu eikyo ni kansuru kento

    Energy Technology Data Exchange (ETDEWEB)

    Ojima, T.; Murakami, S. [The University of Tokyo, Tokyo (Japan). Institute of Industrial Science; Mitsumoto, K. [Waseda University, Tokyo (Japan). School of Science and Engineering

    1997-10-01

    Study is conducted of the effect of change in land use and increase in artificial exhaust heat on heat island formation in Shanghai. Concerning the land use distribution in Shanghai, a point sampling survey was conducted in the 1930s using topographic charts, when the area was broken down into building-occupied region, paddy field, bare ground, and waters. In the 1990s, thanks to data from satellites, high-density and low-density urban regions have added. Calculation for Shanghai is performed, based on the rate of increase in Tokyo`s population and data predicted for Shanghai`s population, on the assumption that Shanghai`s population in the 2050s will grow 2.3 times larger than it is in the 1990s. The prediction thus produced indicates that the urban area in Shanghai in the 2050s will be as large as that of the present-day Tokyo that covers a 50km zone. Heat island formation prediction for Shanghai is worked out using computational fluid dynamics (CFD)-aided simulation. According to the prediction, while the maximum temperature in the 1930s was 29.6degC or 4degC higher than in the suburbs, it is 33.2degC or 7.6deg higher in the 1990s, and will be 34.4degC or 8.6degC higher in the 2050s. 16 refs., 11 figs., 1 tab.

  14. Effects of the urban heat island on the phenology of Odonata in London, UK

    Science.gov (United States)

    Villalobos-Jiménez, Giovanna; Hassall, Christopher

    2017-07-01

    Urbanisation is one of the major drivers of ecosystem change and includes increased temperatures in cities leading to an urban heat island (UHI). This study quantified the phenological response of odonates across London, UK, from 1990 to 2012, using a database of 1,031,277 historical sightings. The ordinal flight dates of each species were used to calculate the leading edge, middle and trailing edge of the flight period (P5, P50 and P95, respectively). The results suggest that the phenology of odonates is affected by the UHI only at a community level: no significant changes in the P5 or P50 of the flight period were found, although the P95 shows a mean advance of 4.13 days compared to rural areas, thus suggesting a contraction of the flight period in urban areas. However, only one individual species ( Sympetrum striolatum) exhibited an advance in the P95 of the flight period in urban areas compared to rural areas. On the other hand, climate change (minimum temperature) had a much stronger impact on the phenology of odonates at the community level with a significant advance of 6.9 days °C-1 in the P5 of the flight period, 3.1 days °C-1 in the P50 and 3.3 days °C-1 in the P95 flight date. Similarly, a significant advance in P5 was found in 7 of the 15 species tested in response to minimum temperature, and 2 species showed a significant advance in P50 in response to minimum temperature, but no species showed a shift in the P95 flight date due to minimum temperature. As shown in previous studies, life history influences the phenological response of odonates, with spring species and those species lacking an egg diapause being the most responsive to increased temperatures, although summer species and species with obligate egg diapause also respond to the UHI by advancing the P95 by 3.8 and 4.5 days, respectively, compared to rural areas, thus contracting the flight period. The present study shows that the UHI has negligible impacts on emergence patterns of odonates

  15. Streams in the urban heat island: spatial and temporal variability in temperature

    Science.gov (United States)

    Somers, Kayleigh A.; Bernhardt, Emily S.; Grace, James B.; Hassett, Brooke A.; Sudduth, Elizabeth B.; Wang, Siyi; Urban, Dean L.

    2013-01-01

    Streams draining urban heat islands tend to be hotter than rural and forested streams at baseflow because of warmer urban air and ground temperatures, paved surfaces, and decreased riparian canopy. Urban infrastructure efficiently routes runoff over hot impervious surfaces and through storm drains directly into streams and can lead to rapid, dramatic increases in temperature. Thermal regimes affect habitat quality and biogeochemical processes, and changes can be lethal if temperatures exceed upper tolerance limits of aquatic fauna. In summer 2009, we collected continuous (10-min interval) temperature data in 60 streams spanning a range of development intensity in the Piedmont of North Carolina, USA. The 5 most urbanized streams averaged 21.1°C at baseflow, compared to 19.5°C in the 5 most forested streams. Temperatures in urban streams rose as much as 4°C during a small regional storm, whereas the same storm led to extremely small to no changes in temperature in forested streams. Over a kilometer of stream length, baseflow temperature varied by as much as 10°C in an urban stream and as little as 2°C in a forested stream. We used structural equation modeling to explore how reach- and catchment-scale attributes interact to explain maximum temperatures and magnitudes of storm-flow temperature surges. The best predictive model of baseflow temperatures (R2  =  0.461) included moderately strong pathways directly (extent of development and road density) and indirectly, as mediated by reach-scale factors (canopy closure and stream width), from catchment-scale factors. The strongest influence on storm-flow temperature surges appeared to be % development in the catchment. Reach-scale factors, such as the extent of riparian forest and stream width, had little mitigating influence (R2  =  0.448). Stream temperature is an essential, but overlooked, aspect of the urban stream syndrome and is affected by reach-scale habitat variables, catchment-scale urbanization

  16. Three-Dimensional City Determinants of the Urban Heat Island: A Statistical Approach

    Science.gov (United States)

    Chun, Bum Seok

    There is no doubt that the Urban Heat Island (UHI) is a mounting problem in built-up environments, due to the energy retention by the surface materials of dense buildings, leading to increased temperatures, air pollution, and energy consumption. Much of the earlier research on the UHI has used two-dimensional (2-D) information, such as land uses and the distribution of vegetation. In the case of homogeneous land uses, it is possible to predict surface temperatures with reasonable accuracy with 2-D information. However, three-dimensional (3-D) information is necessary to analyze more complex sites, including dense building clusters. Recent research on the UHI has started to consider multi-dimensional models. The purpose of this research is to explore the urban determinants of the UHI, using 2-D/3-D urban information with statistical modeling. The research includes the following stages: (a) estimating urban temperature, using satellite images, (b) developing a 3-D city model by LiDAR data, (c) generating geometric parameters with regard to 2-/3-D geospatial information, and (d) conducting different statistical analyses: OLS and spatial regressions. The research area is part of the City of Columbus, Ohio. To effectively and systematically analyze the UHI, hierarchical grid scales (480m, 240m, 120m, 60m, and 30m) are proposed, together with linear and the log-linear regression models. The non-linear OLS models with Log(AST) as dependent variable have the highest R2 among all the OLS-estimated models. However, both SAR and GSM models are estimated for the 480m, 240m, 120m, and 60m grids to reduce their spatial dependency. Most GSM models have R2s higher than 0.9, except for the 240m grid. Overall, the urban characteristics having high impacts in all grids are embodied in solar radiation, 3-D open space, greenery, and water streams. These results demonstrate that it is possible to mitigate the UHI, providing guidelines for policies aiming to reduce the UHI.

  17. Reducing urban heat island effects to improve urban comfort and balance energy consumption in Bucharest (Romania)

    Science.gov (United States)

    Constantinescu, Dan; Ochinciuc, Cristina Victoria; Cheval, Sorin; Comşa, Ionuţ; Sîrodoev, Igor; Andone, Radu; Caracaş, Gabriela; Crăciun, Cerasella; Dumitrescu, Alexandru; Georgescu, Mihaela; Ianoş, Ioan; Merciu, Cristina; Moraru, Dan; Opriş, Ana; Paraschiv, Mirela; Raeţchi, Sonia; Saghin, Irina; Schvab, Andrei; Tătui-Văidianu, Nataşa

    2017-04-01

    In the recent decades, extreme temperature events and derived hazards are frequent and trigger noteworthy impacts in Romania, especially over the large urban areas. The cities produce significant disturbances of many elements of the regional climate, and generates adverse effects such as Urban Heat Islands (UHI). This presentation condenses the outputs of an ongoing research project (REDBHI) developed through (2013-2017) focused on developing a methodology for monitoring and forecasting indoor climate and energy challenges related to the intensity of UHI of Bucharest (Romania), based on relevant urban climate zones (UCZs). Multi-criteria correlations between the UHI and architectural, urban and landscape variables were determined, and the vulnerability of buildings expressed in the form of transfer function between indoor micro-climate and outdoor urban environment. The vulnerability of civil buildings was determined in relation with the potential for amplifying the thermal hazards intensity through the anthropogenic influence. The project REDBHI aims at developing innovative and original products, with direct applicability, which can be used in any urban settlement and have market potential with regards to energy design and consulting. The concrete innovative outcomes consist of a) localization of the Bucharest UCZs according to the UHI intensity, identifying reference buildings and sub-zones according to urban anthropic factors and landscape pattern; b) typology of representative buildings with regards to energy consumption and CO2 emitted as a result of building exploitation; c) 3D modelling of the reference buildings and of the thermal/energy reaction to severe climatic conditions d) empirical validation of the dynamic thermal/energy analysis; d) development of an pilot virtual studio capable to simulate climate alerts, analyse scenarios and suggest measures to mitigate the UHI effects, and disseminate the outcomes for educational purposes; e) compendium of

  18. Energy impacts of heat island reduction strategies in the Greater Toronto Area, Canada; FINAL

    International Nuclear Information System (INIS)

    Konopacki, Steven; Akbari, Hashem

    2001-01-01

    In 2000, the Toronto Atmospheric Fund (TAF) embarked on an initiative to quantify the potential benefits of Heat Island Reduction (HIR) strategies (shade trees, reflective roofs and pavements) in reducing cooling energy use in buildings, lowering the ambient air temperature and improve air quality. This report summarizes the efforts of Lawrence Berkeley National Laboratory (LBNL) to assess the impacts of HIR measures on building cooling- and heating-energy use. We discuss our efforts to calculate annual energy savings and peak-power avoidance of HIR strategies in the building sector of the Greater Toronto Area. The analysis is focused on three major building types that offer most saving potentials: residence, office and retail store. Using an hourly building energy simulation model, we quantify the energy saving potentials of (1) using cool roofs on individual buildings[direct effect], (2) planting deciduous shade trees near south and west walls of building[direct effect], (3) planting coniferous wind-shielding vegetation near building[direct effect], (4) ambient cooling by a large-scale program of urban reforestation with reflective building roofs and pavements[indirect effect], (5) and the combined direct and indirect effects. Results show potential annual energy savings of over$11M (with uniform residential and commercial electricity and gas prices of$0.084/kWh and$5.54/GJ) could be realized by ratepayers from the combined direct and indirect effects of HIR strategies. Of that total, about 88 percent was from the direct impact roughly divided equally among reflective roofs, shade trees and wind-shielding, and the remainder (12 percent) from the indirect impact of the cooler ambient air temperature. The residential sector accounts for over half (59 percent) of the total, offices 13 percent and retail stores 28 percent. Savings from cool roofs were about 20 percent, shade trees 30 percent, wind shielding of tree 37 percent, and indirect effect 12 percent. These

  19. Study on a heat recovery system for the thermal power plant utilizing air cooling island

    International Nuclear Information System (INIS)

    Sun, Jian; Fu, Lin; Sun, Fangtian; Zhang, Shigang

    2014-01-01

    A new heat recovery system for CHP (combined heat and power) systems named HRU (heat recovery unit) is presented, which could recover the low grade heat of exhausted steam from the turbine at the thermal power plant directly. Heat recovery of exhausted steam is often accomplished by recovering the heat of cooling water in current systems. Therefore, two processes of heat transfer is needed at least. However, exhausted steam could be condensed in the evaporator of HRU directly, which reduce one process of heat transfer. A special evaporator is designed condense the exhausted steam directly. Simulated results are compared to experiments, which could include the calculation of heat transfer coefficients of different parts of HRU. It is found that about 25Mw of exhausted steam is recovered by this system. HRU could be promising for conventional CHP systems, which could increase the total energy efficiency obviously and enlarge the heating capacity of a built CHP system. - Highlights: • A new heat recovery system for thermal power plant is presented. • A mathematical model including heat transfer coefficients calculation is given. • This heat recovery system is experimented at a thermal power plant. • Performances of this system under different working conditions are simulated

  20. Urban weather data and building models for the inclusion of the urban heat island effect in building performance simulation.

    Science.gov (United States)

    Palme, M; Inostroza, L; Villacreses, G; Lobato, A; Carrasco, C

    2017-10-01

    This data article presents files supporting calculation for urban heat island (UHI) inclusion in building performance simulation (BPS). Methodology is used in the research article "From urban climate to energy consumption. Enhancing building performance simulation by including the urban heat island effect" (Palme et al., 2017) [1]. In this research, a Geographical Information System (GIS) study is done in order to statistically represent the most important urban scenarios of four South-American cities (Guayaquil, Lima, Antofagasta and Valparaíso). Then, a Principal Component Analysis (PCA) is done to obtain reference Urban Tissues Categories (UTC) to be used in urban weather simulation. The urban weather files are generated by using the Urban Weather Generator (UWG) software (version 4.1 beta). Finally, BPS is run out with the Transient System Simulation (TRNSYS) software (version 17). In this data paper, four sets of data are presented: 1) PCA data (excel) to explain how to group different urban samples in representative UTC; 2) UWG data (text) to reproduce the Urban Weather Generation for the UTC used in the four cities (4 UTC in Lima, Guayaquil, Antofagasta and 5 UTC in Valparaíso); 3) weather data (text) with the resulting rural and urban weather; 4) BPS models (text) data containing the TRNSYS models (four building models).

  1. Urban weather data and building models for the inclusion of the urban heat island effect in building performance simulation

    Directory of Open Access Journals (Sweden)

    M. Palme

    2017-10-01

    Full Text Available This data article presents files supporting calculation for urban heat island (UHI inclusion in building performance simulation (BPS. Methodology is used in the research article “From urban climate to energy consumption. Enhancing building performance simulation by including the urban heat island effect” (Palme et al., 2017 [1]. In this research, a Geographical Information System (GIS study is done in order to statistically represent the most important urban scenarios of four South-American cities (Guayaquil, Lima, Antofagasta and Valparaíso. Then, a Principal Component Analysis (PCA is done to obtain reference Urban Tissues Categories (UTC to be used in urban weather simulation. The urban weather files are generated by using the Urban Weather Generator (UWG software (version 4.1 beta. Finally, BPS is run out with the Transient System Simulation (TRNSYS software (version 17. In this data paper, four sets of data are presented: 1 PCA data (excel to explain how to group different urban samples in representative UTC; 2 UWG data (text to reproduce the Urban Weather Generation for the UTC used in the four cities (4 UTC in Lima, Guayaquil, Antofagasta and 5 UTC in Valparaíso; 3 weather data (text with the resulting rural and urban weather; 4 BPS models (text data containing the TRNSYS models (four building models.

  2. The Effect of Tree Spacing and Size in Urban Areas: Strategies for Mitigating High Temperature in Urban Heat Islands

    Science.gov (United States)

    Berry, R.; Shandas, V.; Makido, Y.

    2017-12-01

    Many cities are unintentionally designed to be heat sinks, which absorb the sun's short-wave radiation and reemit as long-wave radiation. Long time reorganization of this `urban heat island' (UHI) phenomena has led researchers and city planners into developing strategies for reducing ambient temperatures through urban design. Specifically, greening areas have proven to reduce the temperature in UHI's, including strategies such as green streets, green facades, and green roofs have been implemented. Among the scientific community there is promoted study of how myriad greening strategies can reduce temperature, relatively limited work has focused on the distribution, density, and quantity of tree campaigns. This paper examines how the spacing and size of trees reduce temperatures differently. A major focus of the paper is to understand how to lower the temperature through tree planting, and provide recommendations to cities that are attempting to solve their own urban heat island issues. Because different cities have different room for planting greenery, we examined which strategies are more efficient given an area constraint. Areas that have less available room might not be able to plant a high density of trees. We compared the different experimental groups varying in density and size of trees against the control to see the effect the trees had. Through calibration with local weather stations, we used a micrometeorology program (ENVI-Met) to model and simulate the different experimental models and how they affect the temperature. The results suggest that some urban designs can reduce ambient temperatures by over 7 0C, and the inclusion of large form trees have the greatest contribution, by reducing temperatures over 15 0C. The results suggest that using specific strategies that combine placement of specific tree configurations with alternative distribution of urban development patterns can help to solve the current challenges of UHI's, and thereby support management

  3. Effects of landscape composition and pattern on land surface temperature: An urban heat island study in the megacities of Southeast Asia.

    Science.gov (United States)

    Estoque, Ronald C; Murayama, Yuji; Myint, Soe W

    2017-01-15

    Due to its adverse impacts on urban ecological environment and the overall livability of cities, the urban heat island (UHI) phenomenon has become a major research focus in various interrelated fields, including urban climatology, urban ecology, urban planning, and urban geography. This study sought to examine the relationship between land surface temperature (LST) and the abundance and spatial pattern of impervious surface and green space in the metropolitan areas of Bangkok (Thailand), Jakarta (Indonesia), and Manila (Philippines). Landsat-8 OLI/TIRS data and various geospatial approaches, including urban-rural gradient, multiresolution grid-based, and spatial metrics-based techniques, were used to facilitate the analysis. We found a significant strong correlation between mean LST and the density of impervious surface (positive) and green space (negative) along the urban-rural gradients of the three cities, depicting a typical UHI profile. The correlation of impervious surface density with mean LST tends to increase in larger grids, whereas the correlation of green space density with mean LST tends to increase in smaller grids, indicating a stronger influence of impervious surface and green space on the variability of LST in larger and smaller areas, respectively. The size, shape complexity, and aggregation of the patches of impervious surface and green space also had significant relationships with mean LST, though aggregation had the most consistent strong correlation. On average, the mean LST of impervious surface is about 3°C higher than that of green space, highlighting the important role of green spaces in mitigating UHI effects, an important urban ecosystem service. We recommend that the density and spatial pattern of urban impervious surfaces and green spaces be considered in landscape and urban planning so that urban areas and cities can have healthier and more comfortable living urban environments. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Class and Home Problems. Identify-Solve-Broadcast Your Own Transport Phenomenon: Student-Created YouTube Videos to Foster Active Learning in Mass and Heat Transfer

    Science.gov (United States)

    Wen, Fei; Khera, Eshita

    2016-01-01

    Despite the instinctive perception of mass and heat transfer principles in daily life, productive learning in this course continues to be one of the greatest challenges for undergraduate students in chemical engineering. In an effort to enhance student learning in classroom, we initiated an innovative active-learning method titled…

  5. Cool city as a sustainable example of heat island management case study of the coolest city in the world

    Directory of Open Access Journals (Sweden)

    Reeman Mohammed Rehan

    2016-08-01

    Full Text Available Urbanization negatively impacts the urban environment mainly by the production of waste heat from refrigeration systems, although industrial processes and motorized vehicular traffic have also been recognized as additional causes of the urban heat island (UHI effect. The UHI negatively impacts the residents, with spillover effects for environmental aspects. In urbanized areas, it is a critical factor for air quality management and public health. The UHI and strategies to implement its mitigation are becoming increasingly important for governmental agencies and researchers. The problem is how to deal with UHI effects? Accordingly, the main aim of this paper is to determine the UHI mitigation strategies and their effectiveness in terms of cooling and temperature reduction in cities at the level of urban design. This goal is achieved through exploring the concept of the cool city, as it is the key factor, from the theoretical, analytical, and practical viewpoints, to diminishing the urban heat release. Then, the paper analyzes how the concept of the coolest city in the world (Stuttgart, Germany is developed and explores a practical approach toward cool cities. Finally, it suggests a set of recommendations to develop the urban environment in Greater Cairo by applying the cool city concept.

  6. Numerical simulations of heat transfer considering hydraulic discontinuity for an enhanced geothermal system development in Seokmo Island, Korea

    Science.gov (United States)

    Shin, J.; Kim, K.; Hyun, Y.; Lee, K.; Lee, T.

    2011-12-01

    The construction of the first geothermal plant in Korea is under planning in Seokmo Island, where a few artesian wells showing relatively high water temperature of around 70 degrees were discovered lately. Geologic structure in this region is characterized by the fractured granite. Numerical simulations for the temperature evolution in a fractured geothermal reservoir in Seokmo Island under the supposed injection-extraction operating conditions were carried out using TOUGH2. A MINC model including a hydraulic discontinuity in Seokmo Island region, which reflected the analysis from several geophysical explorations and drilled rock core, was generated. Supposing the N05°E, NW83° fracture zone containing the pumping range, the numerical simulation results show that temperature of the extracted geothermal water decreases after 15 years of operation, which decreases the overall efficiency of the expected geothermal plant. This is because the colder water from the injection well, which is 400 m apart, begins to flow into the more permeable fracture zone from the 15th year, resulting in a decrease in temperature near the pumping well. Temperature distribution calculated from the simulation also shows a rise of relatively hot geothermal water along the fracture plane. All of the results are different from the non-fracture MINC model, which shows a low temperature contour in concentric circle shape around the injection well and relatively consistent extracting temperature. This demonstrates that the distribution and the structure of fracture system influence the major mass and heat flow mechanisms in geologic medium. Therefore, an intensive geologic investigation for the fractures including their structure, permeability and connecting relation is important. Acknowledgement This study was financially supported by KIGAM, KETEP and BK21.

  7. Diurnal and Seasonal Variation of Surface Urban Cool and Heat Islands in the Semi-Arid City of Erbil, Iraq

    Directory of Open Access Journals (Sweden)

    Azad Rasul

    2016-09-01

    Full Text Available The influence of land surface temperature (LST makes the near-surface layer of the troposphere a key driver of urban climate. This paper assesses the temporal formation of the daytime Surface Urban Cool Island (SUCI and night-time Surface Urban Heat Island (SUHI effect in Erbil, Iraq, situated in a semi-arid climate region. LST retrievals from the Moderate Resolution Imaging Spectroradiometer (MODIS Aqua and Terra and MODIS Normalized Difference Vegetation Index (NDVI from January 2003 to December 2014 are analysed. The relationships of LST with NDVI and the Normalized Multi-band Drought Index (NMDI are investigated in order to assess the influence of vegetation and moisture on the observed patterns of LST and the SUCI/SUHI. The results indicate that during the daytime, in summer, autumn and winter, densely built-up areas had lower LST acting as a SUCI compared to the non-urbanised area around the city. In contrast, at night-time, Erbil experienced higher LST and demonstrated a significant SUHI effect. The relationship between LST and NDVI is affected by seasonality and is strongly inverted during spring (r2 = 0.73; p < 0.01. Contrary to previous studies of semi-arid cities, a SUCI was detected, not only in the morning, but also during the afternoon.

  8. Seasonal and Spatial Variation of Surface Urban Heat Island Intensity in a Small Urban Agglomerate in Brazil

    Directory of Open Access Journals (Sweden)

    Elis Dener Lima Alves

    2016-12-01

    Full Text Available In recent years, SUHIs (surface urban heat islands have been greatly emphasized in urban climate studies, since it is one of the climate phenomena most influenced by human action. In this study, temporal and spatial variations of SUHIs in the cities of Ceres and Rialma (Brazil were investigated; satellite Landsat 8 TIRS/OLI images from 2013 to 2016 were used for this purpose. The results showed that in all seasons, two relationships were observed, one positive and one negative. An N D V I (Normalized Difference Vegetation Index of 0.2 is the divider of this relationship: up to this value, the relationship is positive, that is, the higher the N D V I value, the higher the surface temperature, while the relationship is negative at an N D V I greater than 0.2. There was high seasonal variation in the SUHIs, with the highest intensities recorded in the spring and summer (±12 °C, and the lowest in the winter. These temporal variations were attributed to the annual cycle of precipitation, which directly involves the robustness of the Cerrado vegetation. SUHIs occupied, on average, an area three times larger than the area of SUCIs (surface urban cool islands. The highest values of SUCIs were observed in water bodies and in valley bottoms. Overall, SUHIs showed high intensities; however, a more intense core area, such as in large cities, was not observed.

  9. The use of reflective and permeable pavements as a potential practice for heat island mitigation and stormwater management

    International Nuclear Information System (INIS)

    Li, H; Harvey, J T; Holland, T J; Kayhanian, M

    2013-01-01

    To help address the built environmental issues of both heat island and stormwater runoff, strategies that make pavements cooler and permeable have been investigated through measurements and modeling of a set of pavement test sections. The investigation included the hydraulic and thermal performance of the pavements. The permeability results showed that permeable interlocking concrete pavers have the highest permeability (or infiltration rate, ∼0.5 cm s −1 ). The two permeable asphalt pavements showed the lowest permeability, but still had an infiltration rate of ∼0.1 cm s −1 , which is adequate to drain rainwater without generating surface runoff during most typical rain events in central California. An increase in albedo can significantly reduce the daytime high surface temperature in summer. Permeable pavements under wet conditions could give lower surface temperatures than impermeable pavements. The cooling effect highly depends on the availability of moisture near the surface layer and the evaporation rate. The peak cooling effect of watering for the test sections was approximately 15–35 °C on the pavement surface temperature in the early afternoon during summer in central California. The evaporative cooling effect on the pavement surface temperature at 4:00 pm on the third day (25 h after watering) was still 2–7 °C lower compared to that on the second day, without considering the higher air temperature on the third day. A separate and related simulation study performed by UCPRC showed that full depth permeable pavements, if designed properly, can carry both light-duty traffic and certain heavy-duty vehicles while retaining the runoff volume captured from an average California storm event. These preliminarily results indicated the technical feasibility of combined reflective and permeable pavements for addressing the built environment issues related to both heat island mitigation and stormwater runoff management. (letter)

  10. The urban heat island in the city of Poznań as derived from Landsat 5 TM

    Science.gov (United States)

    Majkowska, Agnieszka; Kolendowicz, Leszek; Półrolniczak, Marek; Hauke, Jan; Czernecki, Bartosz

    2017-05-01

    To study urban heat island (UHI), Landsat 5 TM data and in situ measurements of air temperature from nine points in Poznań (Poland) for the period June 2008-May 2013 were used. Based on data from measurement points located in different types of land use, the surface urban heat island (SUHI) maps were created. All available and quality-controlled Landsat 5 TM images from 15 unique days were used to obtain the characteristics of land surface temperature (LST) and UHI intensity. In addition, spatial analysis of UHI was conducted on the basis of Corine Land Cover 2006 dataset. In situ measurements at a height of 2 m above ground level show that the UHI is a common occurrence in Poznań with a mean annual intensity of 1.0 °C. The UHI intensity is greater during the warm half of the year. Moreover, results based on the remote sensing data and the Corine Land Cover 2006 indicate that the highest value of the mean LST anomalies (3.4 °C) is attained by the continuous urban fabric, while the lowest value occurs within the broad-leaved forests (-3.1 °C). To re-count from LST to the air temperature at a height of 2 m above ground level ( T agl), linear and non-linear regression models were created. For both models, coefficients of determination equal about 0.80, with slightly higher value for the non-linear approach, which was applied to estimate the T agl spatial variability over the city of Poznań.

  11. Evaluation of Air Pollution Tolerance Index of Plants and Ornamental Shrubs in Enugu City: Implications for Urban Heat Island Effect

    Directory of Open Access Journals (Sweden)

    2016-11-01

    Full Text Available The study compared the air pollution tolerance indices (APTI of five plant species and five ornamental shrubs in Enugu Urban Center. Laboratory analysis was performed on the four physiological and biological parameters including leaf relative water content (RWC, ascorbic acid (AA content, total leaf chlorophyll (TCH and leaf extract pH. These parameters were used to develop an air pollution tolerance index. Factor analysis and descriptive statistics were utilized in the analysis to examine the interactions between these parameters. Vegetation monitoring in terms of its APTI acts as a \\'Bioindicator\\' of air pollution. The study also showed the possibility of utilizing APTI as a tool for selecting plants or ornamental shrubs for urban heat Island mitigation in Enugu City. The result of APTI showed order of tolerance for plants as Anacarduim occidentale (23.20, Pinus spp (22.35, Catalpa burgei (22.57, Magifera indica (23.37, and Psidum guajava (24.15.The result of APTI showed increasing order of sensitivity for ornamental shrubs from ixora red (14.32, yellow ficus(12.63, masquerade pine(12.26, Tuja pine(11.000,to Yellow bush(10.60. The APTI of all the plants examined were higher than those of ornamental shrubs. Thus suggesting that plants in general were more tolerant to air pollution than ornamental shrubs. The ornamental shrubs with lower APTI values (sensitive were recommended as bioindicator of poor urban air quality while plants with high APTI values (tolerant are planted around areas anticipated to have high air pollution load. The result of this current study is therefore handy for future planning and as well provides tolerant species for streetscape and urban heat island mitigation.

  12. Interpretation of the deep cracking phenomenon of tungsten monoblock targets observed in high-heat-flux fatigue tests at 20 MW/m"2

    International Nuclear Information System (INIS)

    Li, Muyuan; You, Jeong-Ha

    2015-01-01

    Highlights: • A theoretical interpretation is presented for deep crack of W monoblocks at 20 MW/m"2. • A consecutive process of crack initiation and growth was modeled in two stages. • The lifetime to crack initiation and the driving force of fracture are assessed. • Numerical predictions in this study agree well with the experimental findings. - Abstract: The HHF qualification tests conducted on the ITER divertor target prototypes showed that the tungsten monoblock armor suffered from deep cracking due to fatigue, when the applied high-heat-flux load approaches 20 MW/m"2. In spite of the critical implication of the deep cracking of armor on the structural integrity of a whole target component, no rigorous interpretation has been given to date. In this paper, a theoretical interpretation of the observed deep cracking feature is presented. A two-stage modeling approach is employed where deep cracking is thought to be a consecutive process of crack initiation and crack growth, which is assumed to be caused by plastic fatigue and brittle facture, respectively. The fatigue lifetime to crack initiation on the armor surface and the crack tip load of brittle fracture are assessed as a function of crack length and heat flux loads. The potential mechanisms of deep cracking are discussed for a typical slow transient high-heat-flux load cycle. It is shown that the quantitative predictions delivered in this study agree well with the observed findings offering insight into the nature of tungsten armor failure.

  13. Heat flow and radioactivity studies in the Ross Island-dry valley area, Antarctica and their tectonic implications

    International Nuclear Information System (INIS)

    Bucher, G.J.

    1980-01-01

    In conjunction with the Dry Valley Drilling Project, the University of Wyoming conducted heat flow and basement radioactivity studies in the Ross Island-dry valley area of southern Victoria Land, Antarctica. This part of Antarctica is characterized by late Cenozoic alkaline basaltic volcanism and uplift. Six heat flow (q) values for the area range from 1.4 to 2.0 HFU, with a mean value of 1.7 HFU. Radioactive heat production (A) values for basement rocks from the dry valleys range from 2.2 to 4.1 HGU, with a mean value of 3.0 HGU. The combined q-A data imply that this area is a zone of high reduced heat flow, similar to the Basin and Range province in the western United States and other zones of late Cenozoic tectonof Antarctica is probably in the range of 1.2 to 1.6 HFU, which is about 50 to 100% higher than the reduced flux which characterizes stable continental areas. The results of the transient conductive models presented herein imply that the high flux in this part of Antarctica cannot be explained by the residual thermal effects of a major episode of lithospheric thinning associated with the generation of the Ferrar Dolerites. The correlation between steady conductive thermal models and the late Cenozoic, silica-undersaturated, alkaline basalts of the region is similarly obscure. For example, purely conductive steady-state temperature-depth models predict partial melting at depths of only 45 to 50 km in the mantle, whereas geochemical data for the volcanic units are consistent with the basalts being generated at depths of at least 60 to 80 km

  14. FINE STRUCTURE IN MANHATTAN’S DAYTIME URBAN HEAT ISLAND: A NEW DATASET

    Directory of Open Access Journals (Sweden)

    Brian Vant-Hull

    2014-01-01

    Full Text Available A street-level temperature and humidity dataset with high resol ution spatial and temporal components has been created for the island of Manhattan, suitab le for use by the urban health and modelling communities. It cons ists of a set of pedestrian measurements over the course of two summers converted into anomaly maps, and a set of ten light -post mounted installations measuring temperature, relative humidity, and illumination at t hree minute intervals over three months. The quality control and data reduction used to produce the anomaly maps is described, and the relationships between spatial and temporal v ariability are investigated. The data sets are available for down load via the project website.

  15. Acquisition and Processing of High Resolution Hyperspectral Imageries for the 3d Mapping of Urban Heat Islands and Microparticles of Montreal

    Science.gov (United States)

    Mongeau, R.; Baudouin, Y.; Cavayas, F.

    2017-10-01

    Ville de Montreal wanted to develop a system to identify heat islands and microparticles at the urban scale and to study their formation. UQAM and UdeM universities have joined their expertise under the framework "Observatoire Spatial Urbain" to create a representative geospatial database of thermal and atmospheric parameters collected during the summer months. They innovated in the development of a methodology for processing high resolution hyperspectral images (1-2 m). In partnership with Ville de Montreal, they integrated 3D geospatial data (topography, transportation and meteorology) in the process. The 3D mapping of intraurban heat islands as well as air micro-particles makes it possible, initially, to identify the problematic situations for future civil protection interventions during extreme heat. Moreover, it will be used as a reference for the Ville de Montreal to establish a strategy for public domain tree planting and in the analysis of urban development projects.

  16. Urban Heat Island Over Delhi Punches Holes in Widespread Fog in the Indo-Gangetic Plains

    Science.gov (United States)

    Gautam, Ritesh; Singh, Manoj K.

    2018-01-01

    Persistent and widespread fog affects several densely populated and agriculturally fertile basins around the world. Dense and polluted fog is especially known to impact transportation, air quality, and public health. Here we report a striking observation of holes in fog over urban areas in satellite imagery. The extent of fog holes appear highly correlated with city populations in fog-prevalent regions of Asia, Europe, and the United States. We find the highest frequency and largest extent of fog holes over Delhi along with suppressed fog fraction, amidst increased fog occurrence over the Indo-Gangetic Plains, based on 17 years of satellite data (2000-2016). This apparent urban heat impact is characterized in sharp urban-rural gradients in surface temperatures and fog thickness. Urban heating seems to have already amplified the long-term fog decline in Europe and the United States and should be assessed over regions undergoing urban expansion including India, where no previous linkages are reported between urban heating and fog.

  17. Correlation analysis of the urban heat island effect and the spatial and temporal distribution of atmospheric particulates using TM images in Beijing

    International Nuclear Information System (INIS)

    Xu, L.Y.; Xie, X.D.; Li, S.

    2013-01-01

    This study combines the methods of observation statistics and remote sensing retrieval, using remote sensing information including the urban heat island (UHI) intensity index, the normalized difference vegetation index (NDVI), the normalized difference water index (NDWI), and the difference vegetation index (DVI) to analyze the correlation between the urban heat island effect and the spatial and temporal concentration distributions of atmospheric particulates in Beijing. The analysis establishes (1) a direct correlation between UHI and DVI; (2) an indirect correlation among UHI, NDWI and DVI; and (3) an indirect correlation among UHI, NDVI, and DVI. The results proved the existence of three correlation types with regional and seasonal effects and revealed an interesting correlation between UHI and DVI, that is, if UHI is below 0.1, then DVI increases with the increase in UHI, and vice versa. Also, DVI changes more with UHI in the two middle zones of Beijing. -- Highlights: •We analyze the correlation from the spatial and temporal views. •We present correlation analyses among UHI, NDWI, NDVI, and DVI from three perspectives. •Three correlations are proven to exist with regional and seasonal effects. •If UHI is below 0.1, then DVI increases with the increase in UHI, and vice versa. •The DVI changes more with UHI in the two middle zones of Beijing. -- Generally, if UHI is below 0.1 in the weak heat island or green island range, then DVI increases with the increase in UHI, and vice versa

  18. The impostor phenomenon

    DEFF Research Database (Denmark)

    Ringby, Betina; Østergaard, Gert Værge; Bønnelykke, Helle

    Persons suffering from the impostor phenomenon often fail to thrive and might be in danger of dropping out of studies. The impostor-phenomenon relates to people who are both skillful and capable, but sees themselves as frauds and as someone who is not worthy of good grades, appraisal for their work...

  19. Validation of a Fast-Response Urban Micrometeorological Model to Assess the Performance of Urban Heat Island Mitigation Strategies

    Science.gov (United States)

    Nadeau, D.; Girard, P.; Overby, M.; Pardyjak, E.; Stoll, R., II; Willemsen, P.; Bailey, B.; Parlange, M. B.

    2015-12-01

    Urban heat islands (UHI) are a real threat in many cities worldwide and mitigation measures have become a central component of urban planning strategies. Even within a city, causes of UHI vary from one neighborhood to another, mostly due the spatial variability in surface thermal properties, building geometry, anthropogenic heat flux releases and vegetation cover. As a result, the performance of UHI mitigation measures also varies in space. Hence, there is a need to develop a tool to quantify the efficiency of UHI mitigation measures at the neighborhood scale. The objective of this ongoing study is to validate the fast-response micrometeorological model QUIC EnvSim (QES). This model can provide all information required for UHI studies with a fine spatial resolution (up to 0.5m) and short computation time. QES combines QUIC, a CFD-based wind solver and dispersion model, and EnvSim, composed of a radiation model, a land-surface model and a turbulent transport model. Here, high-resolution (1 m) simulations are run over a subset of the École Polytechnique Fédérale de Lausanne (EPFL) campus including complex buildings, various surfaces properties and vegetation. For nearly five months in 2006-07, a dense network of meteorological observations (92 weather stations over 0.1 km2) was deployed over the campus and these unique data are used here as a validation dataset. We present validation results for different test cases (e.g., sunny vs cloudy days, different incoming wind speeds and directions) and explore the effect of a few UHI mitigation strategies on the spatial distribution of near-surface air temperatures. Preliminary results suggest that QES may be a valuable tool in decision-making regarding adaptation of urban planning to UHI.

  20. HISTORICAL GIS DATA AND CHANGES IN URBAN MORPHOLOGICAL PARAMETERS FOR THE ANALYSIS OF URBAN HEAT ISLANDS IN HONG KONG

    Directory of Open Access Journals (Sweden)

    F. Peng

    2016-06-01

    Full Text Available Rapid urban development between the 1960 and 2010 decades have changed the urban landscape and pattern in the Kowloon Peninsula of Hong Kong. This paper aims to study the changes of urban morphological parameters between the 1985 and 2010 and explore their influences on the urban heat island (UHI effect. This study applied a mono-window algorithm to retrieve the land surface temperature (LST using Landsat Thematic Mapper (TM images from 1987 to 2009. In order to estimate the effects of local urban morphological parameters to LST, the global surface temperature anomaly was analysed. Historical 3D building model was developed based on aerial photogrammetry technique using aerial photographs from 1964 to 2010, in which the urban digital surface models (DSMs including elevations of infrastructures and buildings have been generated. Then, urban morphological parameters (i.e. frontal area index (FAI, sky view factor (SVF, vegetation fractional cover (VFC, global solar radiation (GSR, Normalized Difference Built-Up Index (NDBI, wind speed were derived. Finally, a linear regression method in Waikato Environment for Knowledge Analysis (WEKA was used to build prediction model for revealing LST spatial patterns. Results show that the final apparent surface temperature have uncertainties less than 1 degree Celsius. The comparison between the simulated and actual spatial pattern of LST in 2009 showed that the correlation coefficient is 0.65, mean absolute error (MAE is 1.24 degree Celsius, and root mean square error (RMSE is 1.51 degree Celsius of 22,429 pixels.

  1. LEED, Its Efficacy and Fallacy in a Regional Context—An Urban Heat Island Case in California

    Directory of Open Access Journals (Sweden)

    Min Ho Shin

    2017-09-01

    Full Text Available The use of energy in the building sector has increased rapidly over the past two decades. Accordingly, various building assessment methods have developed in green building practices. However, the questions still remain in regard to how positively green buildings affect regional surroundings. This study investigates the possible relationship between LEED-certified buildings and urban heat island effect. Using GIS with spatial regression, the study found that constructing an LEED building in a 30-m boundary could possibly lower the temperature of the surrounding environment by 0.35 °C. Also, having a higher certification level, such as Gold or Platinum, increased the lowering effect by 0.48 °C, while a lower certification level, such as Certified or Silver, had a lowering effect of 0.26 °C. Although LEED has gained a substantial amount of interest and skepticism at the same time, the study results could be a potential sign that the Sustainable Sites Credits or energy-efficient materials play a positive role in lowering the temperature.

  2. Spatio-temporal Assessment of Land Use/ Land Cover Dynamics and Urban Heat Island of Jaipur City using Satellite Data

    Science.gov (United States)

    Jalan, S.; Sharma, K.

    2014-11-01

    Urban Heat Island (UHI) refers to the phenomena of higher surface temperature occurring in urban areas as compared to the surrounding countryside attributable to urbanization. Spatio-temporal changes in UHI can be quantified through Land Surface Temperature (LST) derived from satellite imageries. Spatial variations in LST occur due to complexity of land surface - combination of impervious surface materials, vegetation, exposed soils as well as water surfaces. Jaipur city has observed rapid urbanization over the last decade. Due to rising population pressure the city has expanded considerably in areal extent and has also observed substantial land use/land cover (LULC) changes. The paper aims to determine changes in the LST and UHI phenomena for Jaipur city over the period from 2000 to 2011 and analyzes the spatial distribution and temporal variation of LST in context of changes in LULC. Landsat 7 ETM+ (2000) and Landsat 5 TM (2011) images of summer season have been used. Results reveal that Jaipur city has witnessed considerable growth in built up area at the cost of greener patches over the last decade, which has had clear impact on variation in LST. There has been an average rise of 2.99 °C in overall summer temperature. New suburbs of the city record 2° to 4 °C increase in LST. LST change is inversely related to change in vegetation cover and positively related to extent of built up area. The study concludes that UHI of Jaipur city has intensified and extended over new areas.

  3. Do we need full mesoscale models to simulate the urban heat island? A study over the city of Barcelona.

    Science.gov (United States)

    García-Díez, Markel; Ballester, Joan; De Ridder, Koen; Hooyberghs, Hans; Lauwaet, Dirk; Rodó, Xavier

    2016-04-01

    As most of the population lives in urban environments, the simulation of the urban climate has become an important part of the global climate change impact assessment. However, due to the high resolution required, these simulations demand a large amount of computational resources. Here we present a comparison between a simplified fast urban climate model (UrbClim) and a widely used full mesoscale model, the Weather Research and Forecasting (WRF) model, over the city of Barcelona. In order to check the advantages and disadvantages of each approach, both simulations were compared with station data and with land surface temperature observations retrieved by satellites, focusing on the urban heat island. The effect of changing the UrbClim boundary conditions was studied too, by using low resolution global reanalysis data (70 km) and a higher resolution forecast model (15 km). Finally, a strict comparison of the computational resources consumed by both models was carried out. Results show that, generally, the performance of the simple model is comparable to or better than the mesoscale model. The exception are the winds and the day-to-day correlation in the reanalysis driven run, but these problems disappear when taking the boundary conditions from a higher resolution global model. UrbClim was found to run 133 times faster than WRF, using 4x times higher resolution and, thus, it is an efficient solution for running long climate change simulations over large city ensembles.

  4. Influence of diversified relief on the urban heat island in the city of Kraków, Poland

    Science.gov (United States)

    Bokwa, Anita; Hajto, Monika J.; Walawender, Jakub P.; Szymanowski, Mariusz

    2015-10-01

    In cities located in concave landforms, urban heat island (UHI) is an element of a complicated thermal structure and occurs due to the common impact of urban built-up areas and orography-induced processes like katabatic flows or air temperature inversions. Kraków, Poland (760,000 inhabitants) is located in a large valley of the river Vistula. In the years 2009-2013, air temperature was measured with the 5-min sampling resolution at 21 urban and rural points, located in various landforms. Cluster analysis was used to process data for the night-time. Sodar and synoptic data analysis provided results included in the definition of the four types of night-time thermal structure representing the highest and the lowest spatial air temperature variability and two transitional types. In all the types, there are three permanent elements which show the formation of the inversion layer, the cold air reservoir and the UHI peak zone. As the impact of land use and relief on air temperature cannot be separated, a concept of relief-modified UHI (RMUHI) was proposed as an alternative to the traditional UHI approach. It consists of two steps: (1) recognition of the areal thermal structure taking into consideration the city centre as a reference point and (2) calculation of RMUHI intensity separately for each vertical zone.

  5. The spatial variability of air temperature and nocturnal urban heat island intensity in the city of Brno, Czech Republic

    Directory of Open Access Journals (Sweden)

    Dobrovolný Petr

    2015-09-01

    Full Text Available This study seeks to quantify the effects of a number of factors on the nocturnal air temperature field in a medium-sized central European city located in complex terrain. The main data sources consist of mobile air temperature measurements and a geographical database. Temperature measurements were taken along several profiles through the city centre and were made under a clear sky with no advection. Altogether nine sets of detailed measurements, in all seasons, were assembled. Altitude, quantity of vegetation, density of buildings and the structure of the transportation (road system were considered as explanatory variables. The result is that the normalized difference vegetation index (NDVI and the density of buildings were the most important factors, each of them explaining a substantial part (more than 50% of overall air temperature variability. Mobile measurements with NDVI values as a covariate were used for interpolation of air temperature for the entire study area. The spatial variability of nocturnal air temperature and UHI intensity in Brno is the main output presented. Air temperatures interpolated from mobile measurements and NDVI values indicate that the mean urban heat island (UHI intensity in the early night in summer is at its highest (approximately 5 °C in the city centre and decreases towards the suburban areas.

  6. IDENTIFYING LOCAL SCALE CLIMATE ZONES OF URBAN HEAT ISLAND FROM HJ-1B SATELLITE DATA USING SELF-ORGANIZING MAPS

    Directory of Open Access Journals (Sweden)

    C. Z. Wei

    2016-10-01

    Full Text Available With the increasing acceleration of urbanization, the degeneration of the environment and the Urban Heat Island (UHI has attracted more and more attention. Quantitative delineation of UHI has become crucial for a better understanding of the interregional interaction between urbanization processes and the urban environment system. First of all, our study used medium resolution Chinese satellite data-HJ-1B as the Earth Observation data source to derive parameters, including the percentage of Impervious Surface Areas, Land Surface Temperature, Land Surface Albedo, Normalized Differential Vegetation Index, and object edge detector indicators (Mean of Inner Border, Mean of Outer border in the city of Guangzhou, China. Secondly, in order to establish a model to delineate the local climate zones of UHI, we used the Principal Component Analysis to explore the correlations between all these parameters, and estimate their contributions to the principal components of UHI zones. Finally, depending on the results of the PCA, we chose the most suitable parameters to classify the urban climate zones based on a Self-Organization Map (SOM. The results show that all six parameters are closely correlated with each other and have a high percentage of cumulative (95% in the first two principal components. Therefore, the SOM algorithm automatically categorized the city of Guangzhou into five classes of UHI zones using these six spectral, structural and climate parameters as inputs. UHI zones have distinguishable physical characteristics, and could potentially help to provide the basis and decision support for further sustainable urban planning.

  7. Quantifying the influence of land-use and surface characteristics on spatial variability in the urban heat island

    Science.gov (United States)

    Hart, Melissa A.; Sailor, David J.

    2009-03-01

    The urban thermal environment varies not only from its rural surroundings but also within the urban area due to intra-urban differences in land-use and surface characteristics. Understanding the causes of this intra-urban variability is a first step in improving urban planning and development. Toward this end, a method for quantifying causes of spatial variability in the urban heat island has been developed. This paper presents the method as applied to a specific test case of Portland, Oregon. Vehicle temperature traverses were used to determine spatial differences in summertime ~2 m air temperature across the metropolitan area in the afternoon. A tree-structured regression model was used to quantify the land-use and surface characteristics that have the greatest influence on daytime UHI intensity. The most important urban characteristic separating warmer from cooler regions of the Portland metropolitan area was canopy cover. Roadway area density was also an important determinant of local UHI magnitudes. Specifically, the air above major arterial roads was found to be warmer on weekdays than weekends, possibly due to increased anthropogenic activity from the vehicle sector on weekdays. In general, warmer regions of the city were associated with industrial and commercial land-use. The downtown core, whilst warmer than the rural surroundings, was not the warmest part of the Portland metropolitan area. This is thought to be due in large part to local shading effects in the urban canyons.

  8. Interfacial phenomenon theory

    International Nuclear Information System (INIS)

    Kim, Jong Deuk

    2000-02-01

    This book is composed of 8 chapters. It tells what interfacial phenomenon is by showing interfacial energy, characteristic of interface and system of interface from chapter 1. It also introduces interfacial energy and structure theory, molecular structure and orientation theory, and interfacial electricity phenomenon theory in the following 3 chapters. It still goes on by introducing super molecule cluster, disequilibrium dispersion, and surface and film through 3 chapters. And the last chapter is about colloid and application of interface.

  9. Application of green blue roof to mitigate heat island phenomena and resilient to climate change in urban areas: A case study from Seoul, Korea

    OpenAIRE

    Shafique Muhammad; Kim Reeho

    2017-01-01

    Green blue roof has the potential to reduce the surface temperature of the building in the urban areas. Green blue roof is a new innovative low impact development (LID) practice that has exhibited an option to mitigate the heat island phenomena in urban area. This is the modified form of green roof that has ability to store rainwater in vegetation, soil layer and increases the evapotranspiration rate which decreases the temperature of an area. For this purpose, green blue roof is installed at...

  10. A study of urban heat island and its association with particulate matter during winter months over Delhi

    International Nuclear Information System (INIS)

    Pandey, Puneeta; Kumar, Dinesh; Prakash, Amit; Masih, Jamson; Singh, Manoj; Kumar, Surendra; Jain, Vinod Kumar; Kumar, Krishan

    2012-01-01

    Day and night time thermal mapping of Delhi has been done with MODIS satellite data for the months of November and December for years 2007, 2008, 2009 and 2010. The study reveals the formation of day time “cool island” over central parts of Delhi which are found to be cooler by a maximum of 4–6 °C than the surrounding rural areas. During the night time, however, the central parts of Delhi are found to be warmer by a maximum of 4–7 °C or even more than the surrounding rural areas thus confirming the formation of nocturnal urban heat island over Delhi. Measurements of solar spectral irradiance over Delhi reveal significantly lower values as compared to a rural site located south-west of Delhi, during the low wind conditions in the months of November and December. Analysis of average monthly temporal data of surface wind speed and particulate matter concentration over Delhi reveals a strong anti-correlation between wind speed and particulate matter concentration. High values of particulate matter during low wind conditions seem to favor the so called “cool island” over Delhi. Analysis of radiosonde data of 975 hPa and 850 hPa temperatures over Delhi during November and December from 1973 to 2010 reveals a warming trend at the 850 hPa level and an overall declining trend of ∆T between 975 hPa temperatures and 850 hPa temperatures, thus indicating a weakening of vertical thermal gradients over Delhi during these months. The study suggests that urban areas behave more like moderators of diurnal temperature variation in low wind conditions. - Highlights: ► Daytime cool island forms over central parts of Delhi in November and December. ► Central parts of Delhi are cooler by a maximum of 4–6 °C during daytime and warmer by a maximum of 4–7 °C during night. ► Significant negative correlations exist between daytime surface temperatures and AOD levels. ► Land use parameters have significant correlations with surface temperatures. ► The day time

  11. The urban heat island in Rio de Janeiro, Brazil, in the last 30 years using remote sensing data

    Science.gov (United States)

    Peres, Leonardo de Faria; Lucena, Andrews José de; Rotunno Filho, Otto Corrêa; França, José Ricardo de Almeida

    2018-02-01

    The aim of this work is to study urban heat island (UHI) in Metropolitan Area of Rio de Janeiro (MARJ) based on the analysis of land-surface temperature (LST) and land-use patterns retrieved from Landsat-5/Thematic Mapper (TM), Landsat-7/Enhanced Thematic Mapper Plus (ETM+) and Landsat-8/Operational Land Imager (OLI) and Thermal Infrared Sensors (TIRS) data covering a 32-year period between 1984 and 2015. LST temporal evolution is assessed by comparing the average LST composites for 1984-1999 and 2000-2015 where the parametric Student t-test was conducted at 5% significance level to map the pixels where LST for the more recent period is statistically significantly greater than the previous one. The non-parametric Mann-Whitney-Wilcoxon rank sum test has also confirmed at the same 5% significance level that the more recent period (2000-2015) has higher LST values. UHI intensity between ;urban; and ;rural/urban low density; (;vegetation;) areas for 1984-1999 and 2000-2015 was established and confirmed by both parametric and non-parametric tests at 1% significance level as 3.3 °C (5.1 °C) and 4.4 °C (7.1 °C), respectively. LST has statistically significantly (p-value analysis was also performed to identify the urban pixels within MARJ where UHI is more intense by subtracting the LST of these pixels from the LST mean value of ;vegetation; land-use class.

  12. Assessment of the intensity and spatial variability of urban heat islands over the Indian cities for Regional Climate Analysis

    Science.gov (United States)

    Sultana, S.; Satyanarayana, A. N. V.

    2016-12-01

    The Urban heat island (UHI) in general developed over cities, due to the drastic changes in land use and land cover (LULC), has profound impact on the atmospheric circulation patterns due to the changes in the energy transport mechanism which in turn affect the regional climate. In this study, an attempt has been made to quantify the intensity of UHI, and to identify the pockets of UHI over cities during last decade over fast developing cosmopolitan Indian cities such as New Delhi, Mumbai and Kolkata. For this purpose, Landsat TM and ETM+ images during winter period, in about 5 year intervals from 2002 to 2013, has been selected to retrieve the brightness temperatures and land use/cover, from which Land Surface Temperature (LST) has been estimated using Normalized Difference Vegetation Index (NDVI). Normalized Difference Build-up Index (NDBI) and Normalized Difference Bareness Index (NDBaI) are estimated to extract build-up areas and bare land from the satellite images to identify the UHI pockets over the study area. For this purpose image processing and GIS tools were employed. Results reveal a significant increase in the intensity of UHI and increase in its area of influence over all the three cities. An increase of 2 to 2.5 oC of UHI intensity over the study regions has been noticed. The range of increase in UHI intensity is found to be more over New Delhi compared to Mumbai and Kolkata which is more or less same. The number of hotspot pockets of UHI has also been increased as seen from the spatial distribution of LST, NDVI and NDBI. This result signifies the impact of rapid urbanization and infrastructural developments has a direct consequence in modulating the regional climate over the Indian cities.

  13. The Effect of Urban Heat Island on Climate Warming in the Yangtze River Delta Urban Agglomeration in China

    Directory of Open Access Journals (Sweden)

    Qunfang Huang

    2015-07-01

    Full Text Available The Yangtze River Delta (YRD has experienced rapid urbanization and dramatic economic development since 1978 and the Yangtze River Delta urban agglomeration (YRDUA has been one of the three largest urban agglomerations in China. We present evidence of a significant urban heat island (UHI effect on climate warming based on an analysis of the impacts of the urbanization rate, urban population, and land use changes on the warming rate of the daily average, minimal (nighttime and maximal (daytime air temperature in the YRDUA using 41 meteorological stations observation data. The effect of the UHI on climate warming shows a large spatial variability. The average warming rates of average air temperature of huge cities, megalopolises, large cities, medium-sized cities, and small cities are 0.483, 0.314 ± 0.030, 0.282 ± 0.042, 0.225 ± 0.044 and 0.179 ± 0.046 °C/decade during the period of 1957–2013, respectively. The average warming rates of huge cities and megalopolises are significantly higher than those of medium-sized cities and small cities, indicating that the UHI has a significant effect on climate warming (t-test, p < 0.05. Significantly positive correlations are found between the urbanization rate, population, built-up area and warming rate of average air temperature (p < 0.001. The average warming rate of average air temperature attributable to urbanization is 0.124 ± 0.074 °C/decade in the YRDUA. Urbanization has a measurable effect on the observed climate warming in the YRD aggravating the global climate warming.

  14. Correlation or Causality between Land Cover Patterns and the Urban Heat Island Effect? Evidence from Brisbane, Australia

    Directory of Open Access Journals (Sweden)

    Kaveh Deilami

    2016-08-01

    Full Text Available Numerous studies have identified associations between the surface urban heat island (SUHI effect (i.e., SUHI, hereinafter is referred to as UHI and urban growth, particularly changes in land cover patterns. This research questions their causal links to answer a key policy question: If cities restrict urban expansion and encourage people to live within existing urban areas, will that help in controlling UHI? The question has been answered by estimating four models using data from Brisbane, Australia: Model 1—cross-sectional ordinary least square (OLS regression—to examine the association between the UHI effect and land cover patterns in 2013; Model 2—cross-sectional geographically weighted regression (GWR—to examine whether the outputs generated from Model 1 possess significant spatial variations; Model 3—longitudinal OLS—to examine whether changes in land cover patterns led to changes in UHI effects between 2004 and 2013; and Model 4—longitudinal GWR—to examine whether the outputs generated from Model 3 vary significantly over space. All estimations were controlled for potential confounding effects (e.g., population, employment and dwelling densities. Results from the cross-sectional OLS and GWR models were consistent with previous findings and showed that porosity is negatively associated with the UHI effect in 2013. In contrast, population density has a positive association. Results from the longitudinal OLS and GWR models confirm their causal linkages and showed that an increase in porosity level reduced the UHI effect, whereas an increase in population density increased the UHI effect. The findings suggest that even a containment of population growth within existing urban areas will lead to the UHI effect. However, this can be significantly minimized through proper land use planning, by creating a balance between urban and non-urban uses of existing urban areas.

  15. Does quality control matter? Surface urban heat island intensity variations estimated by satellite-derived land surface temperature products

    Science.gov (United States)

    Lai, Jiameng; Zhan, Wenfeng; Huang, Fan; Quan, Jinling; Hu, Leiqiu; Gao, Lun; Ju, Weimin

    2018-05-01

    The temporally regular and spatially comprehensive monitoring of surface urban heat islands (SUHIs) have been extremely difficult, until the advent of satellite-based land surface temperature (LST) products. However, these LST products have relatively higher errors compared to in situ measurements. This has resulted in comparatively inaccurate estimations of SUHI indicators and, consequently, may have distorted interpretations of SUHIs. Although reports have shown that LST qualities are important for SUHI interpretations, systematic investigations of the response of SUHI indicators to LST qualities across cities with dissimilar bioclimates are rare. To address this issue, we chose eighty-six major cities across mainland China and analyzed SUHI intensity (SUHII) derived from Moderate Resolution Imaging Spectroradiometer (MODIS) LST data. The LST-based SUHII differences due to inclusion or exclusion of MODIS quality control (QC) flags (i.e., ΔSUHII) were evaluated. Our major findings included, but are not limited to, the following four aspects: (1) SUHIIs can be significantly impacted by MODIS QC flags, and the associated QC-induced ΔSUHIIs generally accounted for 24.3% (29.9%) of the total SUHII value during the day (night); (2) the ΔSUHIIs differed between seasons, with considerable differences between transitional (spring and autumn) and extreme (summer and winter) seasons; (3) significant discrepancies also appeared among cities located in northern and southern regions, with northern cities often possessing higher annual mean ΔSUHIIs. The internal variations of ΔSUHIIs within individual cities also showed high heterogeneity, with ΔSUHII variations that generally exceeded 5.0 K (3.0 K) in northern (southern) cities; (4) ΔSUHIIs were negatively related to SUHIIs and cloud cover percentages (mostly in transitional seasons). No significant relationship was found in the extreme seasons. Our findings highlight the need to be extremely cautious when using LST

  16. Influences of population, building, and traffic densities on urban heat island intensity in Chiang Mai City, Thailand

    Directory of Open Access Journals (Sweden)

    Kammuang-Lue Niti

    2015-01-01

    Full Text Available This research aims to evaluate the Urban Heat Island Intensity (UHII and study the influences of population density, building density, and traffic density on the UHII in Chiang Mai city on each season and time. The surrounding air temperature was measured by thermocouples at a constant height of 2 m above the road by mobile surveying approach. The surveyed routes were divided into urban routes and rural routes. The UHII was calculated from the average surrounding air temperature difference between the urban and the rural areas. Experimental investigations were carried out in two seasons, consisting of summer (March-May, 2014 and winter (December 2013-February 2014. Experimental investigations were carried out in two periods, which were a daytime period (01.00-03.00 pm and a nighttime period (10.00 pm-00.00 am on Mondays, Wednesdays, and Sundays. The results show that the UHII in summer day, summer night, winter day, and winter night were 1.07°C, 1.27°C, 0.58°C, and 1.34°C, respectively. This implies that the temperature in Chiang Mai city’s urban area is higher than that in the rural area the entire year. Moreover, it was found that the UHII in summer day, winter day, and winter night were primarily affected by the traffic density with the sensitivity percentage of 87.50%, 72.73%, and 63.33%, respectively. In contrast, the UHII in summer night was mainly affected by the building density with the sensitivity percentage of 50.00%.

  17. Impact of Urban Heat Island under the Hanoi Master Plan 2030 on Cooling Loads in Residential Buildings

    Directory of Open Access Journals (Sweden)

    Tran Hoang Hai Nam

    2015-01-01

    Full Text Available This study aims to evaluate the influence of urban heat island (UHI under the Hanoi Master Plan 2030 on the energy consumption for space cooling in residential buildings. The weather conditions under the current and future status (master plan condition simulated in the previous study (Trihamdani et al., 2014 were used and cooling loads in all the residential buildings in Hanoi over the hottest month were estimated under the simulated current and future conditions by using the building simulation program, TRNSYS (v17. Three most typical housing types in the city were selected for the simulation. The cooling loads of respective housing types were obtained in each of the districts in Hanoi. The results show that the total cooling loads over June 2010 is approximately 683 Terajoule (TJ under the current status, but it is predicted to increase to 903 TJ under the master plan condition. The increment is largely due to the increase in number of households (203 TJ or 92%, but partially due to the increase in urban temperature, i.e. UHI effect (17 TJ or 8%. The increments in new built-up areas were found to be larger than those in existing built-up areas. The cooling load in apartment is approximately half of that in detached house, which is approximately half of that in row house. Moreover, it was seen that although sensible cooling loads increased with the increase in outdoor temperature, the latent cooling loads decreased due to the decrease in absolute humidity and the increase in air temperature.

  18. Phenomenon detection device

    International Nuclear Information System (INIS)

    Suzuki, Yasuo.

    1994-01-01

    Detection signals for a specific phenomenon outputted from any of detectors are distributed by way of half mirrors and inputted to a logic discrimination circuit by way of a photoelectric convertor. The photoelectric convertor detects the quantity of light corresponding to the optical signals from more than two detectors which detected the phenomenon, and outputs detection signals to the logic discrimination circuit. If the phenomenon is detected, since both inputs turn ON in the logic discrimination circuit in accordance with the predetermined logical sum, the occurrence of a specific phenomenon is detected. Thus, an optical system substantially comprises half mirrors, reflection mirrors and photoelectric convertor in combination provides a logic circuit. Since the circuit which transmits signals of the detectors is constituted with an optical system using the half mirrors, the number of parts constituting the logic circuit can greatly be saved. In addition, since the optical system comprises mirrors or half mirrors which have been used so far, they can be used, once assembled, quasipermanently, and the reliability can be enhanced greatly. (N.H.)

  19. Mask Phenomenon in Communication

    Institute of Scientific and Technical Information of China (English)

    郎丽璇

    2013-01-01

    People sometimes wear masks. Abusive expression may be used to convey love while polite words can be exchanged among enemies. This essay describes and discusses this special phenomenon in communication and analyzes the elements that con-tribute to the success of a mask communication.

  20. The Urban Heat Island Effect and the Role of Vegetation to Address the Negative Impacts of Local Climate Changes in a Small Brazilian City

    Directory of Open Access Journals (Sweden)

    Elis Dener Lima Alves

    2017-02-01

    Full Text Available This study analyzes the influence of urban-geographical variables on determining heat islands and proposes a model to estimate and spatialize the maximum intensity of urban heat islands (UHI. Simulations of the UHI based on the increase of normalized difference vegetation index (NDVI, using multiple linear regression, in Iporá (Brazil are also presented. The results showed that the UHI intensity of this small city tended to be lower than that of bigger cities. Urban geometry and vegetation (UI and NDVI were the variables that contributed the most to explain the variability of the maximum UHI intensity. It was observed that areas located in valleys had lower thermal values, suggesting a cool island effect. With the increase in NDVI in the central area of a maximum UHI, there was a significant decrease in its intensity and size (a 45% area reduction. It is noteworthy that it was possible to spatialize the UHI to the whole urban area by using multiple linear regression, providing an analysis of the urban set from urban-geographical variables and thus performing prognostic simulations that can be adapted to other small tropical cities.

  1. Urban Heat Islands

    Science.gov (United States)

    Luvall, Jeffrey C.; Quattrochi, Dale A.; Rickman, Doug L.; Estes, Maury G.

    2011-01-01

    It is estimated that by the year 2025, 80% of the world's population will live in cities. This conversion of the natural landscape vegetation into man-made urban structures such as roads and buildings drastically alter the regional surface energy budgets, hydrology, precipitation patterns, and meteorology. Research studies from many cities have documented these effects range from decreases in air quality, increased energy consumption and alteration of regional climate to direct effects on human health.

  2. Urban heat island 2

    DEFF Research Database (Denmark)

    Bühler, Oliver; Jensen, Marina Bergen; Tøttrup, Christian

    2010-01-01

    Målinger af overfladetemperaturer viser, at der er betydelige temperaturforskelle mellem de forskellige bydele i København. De områder, der bliver allervarmest, er dem med den mindste andel af grønt. Det konkluderes i en rapport fra Skov & Landskab....

  3. Heat island effect on the quality of life in the city; Hitte-eilandeffect zet leefbaarheid in de stad verder onder druk

    Energy Technology Data Exchange (ETDEWEB)

    Van Harmelen, T.; Klok, L.; Doepp, S.; Dolevo, R.; Janssen, S. [Business Unit Milieu en Leefomgeving, TNO Bouw en Ondergrond, Delft (Netherlands)

    2008-12-15

    The global rise in temperature as a result of climate change becomes increasingly perceptible. The health effects of these changes, combined with air quality, are extra high in urban areas. It seems worth while to examine the consequences of increasing heat in urban areas in the Netherlands. In order to deal with the consequences in a responsible manner and to prepare for an even warmer future, answers will have to be found for the following two questions: (1) How large is the heat island effect in Dutch cities an what can we expect in the future?; and (2) What are the consequences of the heat island effect that we will have to take into account? [mk]. [Dutch] De mondiale temperatuurstijging ten gevolge van klimaatverandering is ook in Nederland steeds duidelijker waarneembaar. De gezondheidseffecten van deze veranderingen in combinatie met luchtkwaliteit zijn in het stedelijk gebied extra groot. Het lijkt daarom de moeite waard om onderzoek te doen naar de gevolgen van toenemende hitte in stedelijke gebieden in Nederland. Om op verantwoorde wijze met de gevolgen om te gaan en om voorbereid te zijn op een nog warmere toekomst zullen antwoorden moeten worden gevonden op twee wagen: (1) Hoe groot is het hitte-eilandeffect in de Nederlandse stad nu en wat kunnen we verwachten in de toekomst?; en (2) Met welke gevolgen van het hitte-eilandeffect moeten we rekening houden?.

  4. The surface urban heat island response to urban expansion: A panel analysis for the conterminous United States

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xiaoma; Zhou, Yuyu; Asrar, Ghassem R.; Imhoff, Marc; Li, Xuecao

    2017-12-01

    Abstract: Urban heat island (UHI), a major concern worldwide, affects human health and energy use. With current and anticipated rapid urbanization, improved understanding of the response of UHI to urbanization is important for impact analysis and developing effective adaptation measures and mitigation strategies. Current studies mainly focus on a single or a few big cities and knowledge on the response of UHI to urbanization for large areas is very limited. Modelling UHI caused by urbanization for large areas that encompass multiple metropolitans remains a major scientific challenge/opportunity. As a major indicator of urbanization, urban area size lends itself well for representation in prognostic models to investigate the impacts of urbanization on UHI and the related socioeconomic and environmental effects. However, we have little knowledge on how UHI responds to the increase of urban area size, namely urban expansion, and its spatial and temporal variation over large areas. In this study, we investigated the relationship between surface UHI (SUHI) and urban area size in the climate and ecological context, and its spatial and temporal variations, based on a panel analysis of about 5000 urban areas of 10 km2 or larger, in the conterminous U.S. We found statistically significant positive relationship between SUHI and urban area size, and doubling the urban area size led to a SUHI increase of higher than 0.7 °C. The response of SUHI to the increase of urban area size shows spatial and temporal variations, with stronger SUHI increase in the Northern region of U.S., and during daytime and summer. Urban area size alone can explain as much as 87% of the variance of SUHI among cities studied, but with large spatial and temporal variations. Urban area size shows higher association with SUHI in regions where the thermal characteristics of land cover surrounding the urban are more homogeneous, such as in Eastern U.S., and in the summer months. This study provides a

  5. A Remote Sensing-based Characterization of the Urban Heat Island and its Implications for Modeled Estimates of Urban Biogenic Carbon Fluxes in Boston, MA.

    Science.gov (United States)

    Wang, J.; Friedl, M. A.; Hutyra, L.; Hardiman, B. S.

    2015-12-01

    Urban land use occupies a small but critical proportion of global land area for the carbon cycle, and in the coming decades, urban land area is expected to nearly double. Conversion of natural land cover to urban land cover imposes myriad ecological effects, including increased land surface and air temperatures via the urban heat island effect. In this study, we characterize the seasonal and spatial characteristics of the urban heat island over Boston, MA and estimate its consequences on biogenic carbon fluxes with a remote sensing-based model. Using a 12-year time series of emissivity- and atmospherically-corrected land surface temperatures from Landsat TM and ETM+ imagery, we find a high degree of spatial heterogeneity and consistent seasonal patterns in the thermal properties of Boston, controlled mainly by variations in vegetative cover. Field measurements of surface air temperature across an urbanization gradient show season- and vegetation-dependent patterns consistent with those observed in the Landsat data. With a fused data set that combines surface air temperature, MODIS, and Landsat observations, we modify and run the Vegetation Photosynthesis and Respiration Model (VPRM) to explore 1) how elevated temperatures affect diurnal and seasonal patterns of hourly urban biogenic carbon fluxes in Massachusetts in 2013 and 2014 and 2) to what extent these fluxes follow spatial patterns found in the urban heat island. Model modifications simulate the ecological effects of urbanization, including empirical adjustments to reanalysis-driven air temperatures (up to 5 K) and ecosystem respiration reduced by impervious surface area. Model results reveal spatio-temporal patterns consistent with strong land use and vegetation cover controls on biogenic carbon fluxes, with non-trivial biogenic annual net ecosystem exchange occurring in urban and suburban areas (up to -2.5 MgC/ha/yr). We specifically consider the feedbacks between Boston's urban heat island and landscape

  6. WORKPLACE HARASSMENT. MOBBING PHENOMENON

    Directory of Open Access Journals (Sweden)

    Marius Ezer

    2012-11-01

    Full Text Available Moral harassment at the workplace has become in the last period a very often met phenomenon that severely affects the work relations and represents a significant health and safety danger. This problem has become in the last period an important issue for the European Union which has initiated a series of studie for analyzing the consequences of this pehenomenon on the normal process of the work relations, that has lead, in its turn to an awareness of this new dimenion of harassment between the employees at the internal level.

  7. Energy savings for heat-island reduction strategies in Chicago and Houston (including updates for Baton Rouge, Sacramento, and Salt Lake City)

    Energy Technology Data Exchange (ETDEWEB)

    Konopacki, S.; Akbari, H.

    2002-02-28

    In 1997, the U.S. Environmental Protection Agency (EPA) established the ''Heat Island Reduction Initiative'' to quantify the potential benefits of Heat-Island Reduction (HIR) strategies (i.e., shade trees, reflective roofs, reflective pavements and urban vegetation) to reduce cooling-energy use in buildings, lower the ambient air temperature and improve urban air quality in cities, and reduce CO2 emissions from power plants. Under this initiative, the Urban Heat Island Pilot Project (UHIPP) was created with the objective of investigating the potential of HIR strategies in residential and commercial buildings in three initial UHIPP cities: Baton Rouge, LA; Sacramento, CA; and Salt Lake City, UT. Later two other cities, Chicago, IL and Houston, TX were added to the UHIPP. In an earlier report we summarized our efforts to calculate the annual energy savings, peak power avoidance, and annual CO2 reduction obtainable from the introduction of HIR strategies in the initial three cities. This report summarizes the results of our study for Chicago and Houston. In this analysis, we focused on three building types that offer the highest potential savings: single-family residence, office and retail store. Each building type was characterized in detail by vintage and system type (i.e., old and new building constructions, and gas and electric heat). We used the prototypical building characteristics developed earlier for each building type and simulated the impact of HIR strategies on building cooling- and heating-energy use and peak power demand using the DOE-2.1E model. Our simulations included the impact of (1) strategically-placed shade trees near buildings [direct effect], (2) use of high-albedo roofing material on the building [direct effect], (3) urban reforestation with high-albedo pavements and building surfaces [indirect effect] and (4) combined strategies 1, 2, and 3 [direct and indirect effects]. We then estimated the total roof area of air

  8. Energy savings for heat-island reduction strategies in Chicago and Houston (including updates for Baton Rouge, Sacramento, and Salt Lake City); FINAL

    International Nuclear Information System (INIS)

    Konopacki, S.; Akbari, H.

    2002-01-01

    In 1997, the U.S. Environmental Protection Agency (EPA) established the ''Heat Island Reduction Initiative'' to quantify the potential benefits of Heat-Island Reduction (HIR) strategies (i.e., shade trees, reflective roofs, reflective pavements and urban vegetation) to reduce cooling-energy use in buildings, lower the ambient air temperature and improve urban air quality in cities, and reduce CO2 emissions from power plants. Under this initiative, the Urban Heat Island Pilot Project (UHIPP) was created with the objective of investigating the potential of HIR strategies in residential and commercial buildings in three initial UHIPP cities: Baton Rouge, LA; Sacramento, CA; and Salt Lake City, UT. Later two other cities, Chicago, IL and Houston, TX were added to the UHIPP. In an earlier report we summarized our efforts to calculate the annual energy savings, peak power avoidance, and annual CO2 reduction obtainable from the introduction of HIR strategies in the initial three cities. This report summarizes the results of our study for Chicago and Houston. In this analysis, we focused on three building types that offer the highest potential savings: single-family residence, office and retail store. Each building type was characterized in detail by vintage and system type (i.e., old and new building constructions, and gas and electric heat). We used the prototypical building characteristics developed earlier for each building type and simulated the impact of HIR strategies on building cooling- and heating-energy use and peak power demand using the DOE-2.1E model. Our simulations included the impact of (1) strategically-placed shade trees near buildings[direct effect], (2) use of high-albedo roofing material on the building[direct effect], (3) urban reforestation with high-albedo pavements and building surfaces[indirect effect] and (4) combined strategies 1, 2, and 3[direct and indirect effects]. We then estimated the total roof area of air-conditioned buildings in each

  9. PP composites with Hybrid Nanofillers: NTC phenomenon

    International Nuclear Information System (INIS)

    Sarlin, Juha; Immonen, Kirsi

    2010-01-01

    Electric conductive plastic composites have a wide potential for commercial applications, some examples are EMI shielding housings and components in automotive industry and in consumer electronics, equipments in health care sector and fuel cell components. A phenomenon in conductive composites, especially in composites with carbon based fillers, is change of thermal induced change in conductivity as a result of morphological transitions. Usually the observed changes are practically irreversible. The phenomenon may cause increasing resistivity, usually called as 'positive temperature coefficient' (PTC) or decreasing resistivity, called 'negative temperature coefficient' (NTC), where the new morphology created by heat treatment is more favorable for electric conductivity compared to the original state. The existence of NTC is a sing of the lost potential in material design and processing. Therefore detailed information about the phenomenon gives us tools to develop high performance conductive materials. It this paper we discuss about NTC phenomenon observed in PP composites with CNT or in-situ synthesized CNT-PANi hybrid nanofiller with an amphiphilic dispersing agent. The goal of the paper is not to present a comprehensive model of this phenomenon; we present some experimental results which may be related to polymer-filler interactions. These details are a part of this complicated phenomenon.

  10. The statistical stability phenomenon

    CERN Document Server

    Gorban, Igor I

    2017-01-01

    This monograph investigates violations of statistical stability of physical events, variables, and processes and develops a new physical-mathematical theory taking into consideration such violations – the theory of hyper-random phenomena. There are five parts. The first describes the phenomenon of statistical stability and its features, and develops methods for detecting violations of statistical stability, in particular when data is limited. The second part presents several examples of real processes of different physical nature and demonstrates the violation of statistical stability over broad observation intervals. The third part outlines the mathematical foundations of the theory of hyper-random phenomena, while the fourth develops the foundations of the mathematical analysis of divergent and many-valued functions. The fifth part contains theoretical and experimental studies of statistical laws where there is violation of statistical stability. The monograph should be of particular interest to engineers...

  11. Mapping urban heat islands of arctic cities using combined data on field measurements and satellite images based on the example of the city of Apatity (Murmansk Oblast)

    Science.gov (United States)

    Konstantinov, P. I.; Grishchenko, M. Y.; Varentsov, M. I.

    2015-12-01

    This article presents the results of a study of the urban heat island (UHI) in the city of Apatity during winter that were obtained according to the data of field meteorological measurements and satellite images. Calculations of the surface layer temperature have been made based on the surface temperature data obtained from satellite images. The experimental data on air temperature were obtained as a result of expeditionary meteorological observations, and the experimental data on surface temperature were obtained based on the data of the space hyperspectral Moderate-Resolution Imaging Spectroradiometer (MODIS) system, channels 31 and 32 (10.78-11.28 and 11.77-12.27 micrometers, respectively). As a result of the analysis of temperature fields, an intensive heat island (up to 3.2°C) has been identified that was estimated based on the underlying surface temperature, and its mean intensity over the observation period significantly exceeds the representative data for European cities in winter. It has also been established that the air temperature calculated according to the MODIS data is systematically higher under winter conditions than the air temperature from direct measurement data.

  12. Study of the Relationships between the Spatial Extent of Surface Urban Heat Islands and Urban Characteristic Factors Based on Landsat ETM+ Data

    Directory of Open Access Journals (Sweden)

    Jinqu Zhang

    2008-11-01

    Full Text Available Ten cities with different population and urban sizes located in the Pearl River Delta, Guangdong Province, P.R. China were selected to study the relationships between the spatial extent of surface urban heat islands (SUHI and five urban characteristic factors such as urban size, development area, water proportion, mean NDVI (Normalized Vegetation Index and population density, etc. The spatial extent of SUHI was quantified by using the hot island area (HIA. All the cities are almost at the same latitude, showing similar climate and solar radiation, the influence of which could thus be eliminated during our computation and comparative study. The land surface temperatures (LST were retrieved from the data of Landsat 7 Enhanced Thematic Mapper Plus (ETM+ band 6 using a mono-window algorithm. A variance-segmenting method was proposed to compute HIA for each city from the retrieved LST. Factors like urban size, development area and water proportion were extracted directly from the classification images of the same ETM+ data and the population density factor is from the official census. Correlation and regression analyses were performed to study the relationships between the HIA and the related factors, and the results show that HIA is highly correlated to urban size (r=0.95, population density (r=0.97 and development area (r=0.83 in this area. It was also proved that a weak negative correlation existed between HIA and both mean NDVI and water proportion for each city. Linear functions between HIA and its related factors were established, respectively. The HIA can reflect the spatial extent and magnitude of the surface urban heat island effect, and can be used as reference in the urban planning.

  13. 环境风对直接空冷岛换热的影响%The Effects of Environment Wind on Heat Transfer of Direct Air Cooled Island

    Institute of Scientific and Technical Information of China (English)

    丁振宇; 陈巍; 田永兴; 李学智

    2011-01-01

    以国内蒙达电厂600MW直接空冷机组为例,针对当前直接空冷机组运行中的突出问题--环境风的不利影响,利用CFD数值模拟软件Fluent,对空冷岛外部流场进行数值模拟.发现炉后来风、热风回流、倒灌是造成空冷岛换热效率下降的主要因素,分析了炉后来风、热风回流、倒灌等对空冷岛外部流场和换热性能的影响机理,并得到环境风速与热风回流和倒灌的关系.%Taking Mengda 600MW direct air-cooled units ii our country into consideration,in view of serious hurdles of air-cooled units available-the unfavorable influences of Ambient Wind,we tentatively proceeds to making numerical simulation research on external flow field of direct air-cooled island by using CFD software Fluent. Found that the wind generating from the boiler house afterwards,hot air re-circulation and air inverse flow are the main factors of decline in the efficiency of air-cooled island heat. This paper proposed the mechanism of ambient wind impacts,and the analysis on such effects of the wind generating from the boiler house afterwards,hot air re-circulation and air inverse flow on external flow field and heat exchange efficiency of air-cooled island was thus been within reach, found out hot air re-circulation and air inverse flow relationship between the wind speed.

  14. NO REFLOW PHENOMENON

    Directory of Open Access Journals (Sweden)

    Omid Hashemifard

    2010-11-01

    Full Text Available Definition No reflow is a phenomenon in which myocardial ischemia and reduced antegrade flow occur despite the absence of proximal stenosis, spasm, dissection, or embolic cut off of major distal branches.1 In another word no reflow phenomenon means failure of restoration of myocardial flow despite removal of epicardial coronary obstruction.2 The incidence is 2% with plain balloon angioplasty (PTCA, 7% in patients undergoing rotational atherectomy, 12% for primary percutaneous coronary intervention (PCI, and much higher at 42% for PCI of degenerated Saphenous Vein Graft (SVG.3 No reflow is a strong predictor of mortality after PCI. The mortality of patients who developed no reflow has been estimated to be 8% Predictors of no reflow include a higher plaque burden, thrombus, lipid pools by intra vascular ultra sonography (IVUS, higher lesion elastic membrane cross sectional area, preinfarction angina and thrombolysis in myocardial infarction (TIMI flow grade 0 on the initial coronary angiogram. Mechanism The cause is mainly embolization of atheromatous material (gruel. Particles are composed of cholesterol clefts, lipid rich macrophages, fragments of fibrous cap, necrotic lesion core and fibrin. This is aggravated by microembolization of platelet-rich thrombi that release vasoactive agents (e.g., serotonin and thromboxane A2, leading to intense arteriolar vasopasm in the distal vasculature. In the animal laboratory, experimental no reflow has been shown to be due to the plugging of capillaries by red blood cells and neutrophils, myocyte contracture and local intracellular and interstitial edema.4,5      A loss of capillary autoregulation and severe microvascular dysfunction are the ultimate physiologic consequences of these microscopic anatomic alterations. Debris of varying sizes of particulate has variable effects on microcirculatory plugging. The effect of particle size on microvascular dysfunction has been mostly investigated during

  15. The crossed phrenic phenomenon.

    Science.gov (United States)

    Ghali, Michael George Zaki

    2017-06-01

    The cervical spine is the most common site of traumatic vertebral column injuries. Respiratory insufficiency constitutes a significant proportion of the morbidity burden and is the most common cause of mortality in these patients. In seeking to enhance our capacity to treat specifically the respiratory dysfunction following spinal cord injury, investigators have studied the "crossed phrenic phenomenon", wherein contraction of a hemidiaphragm paralyzed by a complete hemisection of the ipsilateral cervical spinal cord above the phrenic nucleus can be induced by respiratory stressors and recovers spontaneously over time. Strengthening of latent contralateral projections to the phrenic nucleus and sprouting of new descending axons have been proposed as mechanisms contributing to the observed recovery. We have recently demonstrated recovery of spontaneous crossed phrenic activity occurring over minutes to hours in C 1 -hemisected unanesthetized decerebrate rats. The specific neurochemical and molecular pathways underlying crossed phrenic activity following injury require further clarification. A thorough understanding of these is necessary in order to develop targeted therapies for respiratory neurorehabilitation following spinal trauma. Animal studies provide preliminary evidence for the utility of neuropharmacological manipulation of serotonergic and adenosinergic pathways, nerve grafts, olfactory ensheathing cells, intraspinal microstimulation and a possible role for dorsal rhizotomy in recovering phrenic activity following spinal cord injury.

  16. Raynaud’s phenomenon

    Directory of Open Access Journals (Sweden)

    F. Ingegnoli

    2011-09-01

    Full Text Available Raynaud’s phenomenon (RP is a vasospastic disorder characterized by episodic color changes of blanching, cyanosis, and hyperemia in response to cold and/or emotional stress. Although most typically noted in the fingers, the circulation of the toes, ears, nose and tongue is also frequently affected. Population studies have shown that RP in adults is more common in women than men, with prevalence estimates ranging from 4% to 30%. Geographic variations in the prevalence reflect differences in climate. RP may be a primary or a secondary process. LeRoy and Medsger suggested criteria for primary RP: symmetric attacks, the absence of tissue necrosis, ulceration or gangrene, the absence of a secondary cause, negative antinuclear antibodies, normal nailfold capillaroscopy and a normal erythrocyte sedimentation rate. Secondary RP is characterized by an age of onset of more than 30 years, painful and asymmetric attacks, ischemic skin lesions, positive autoautoantibodies, capillaroscopic abnormalities and/or clinical features suggestive of connective tissue diseases (CTDs. Among the CTDs, systemic sclerosis has the highest frequency of RP. Finding a cause for RP requires a knowledge of the patient’s occupational, smoking, drug history, physical examination, nailfold capillaroscopy, routine laboratory tests and autoantibodies. Furthermore, RP should be distinguished from acrocyanosis, a condition characterized by continuous cyanosis of the hands or feet that is aggravated by cold temperature. The most important instruction to the patient is abstinence from any smoking, offending drugs should be discontinued, and abrupt changes in temperature. If these measures are inadequate, calcium-channel blockers are the most widely used (nifedipine 30 mg up to 90 mg daily. Alternatively, sympatholytic agent (prazosin, angiotensin II -receptor type I antagonist (losartan, selective sertonin-reuptake inhibitor (fluoxetine may be useful. In the severe cases the role of

  17. Hacia un modelo dinámico para la isla de calor urbana de Madrid = Towards a Dynamic Model for the Urban Heat Island of Madrid.

    Directory of Open Access Journals (Sweden)

    Miguel Núñez Peiró

    2016-04-01

    Full Text Available Esta investigación se enmarca dentro del proyecto MODIFICA (modelo predictivo - Edificios - Isla de Calor Urbano, financiado por el Programa de I + D + i Orientada a los Retos de la sociedad 'Retos Investigación' de 2013. Está dirigido a desarrollar un modelo predictivo de eficiencia energética para viviendas, bajo el efecto de isla de calor urbano (AUS con el fin de ponerla en práctica en la evaluación de la demanda de energía real y el consumo en las viviendas. A pesar de los grandes avances que se han logrado durante los últimos años en el rendimiento energético de edificios, los archivos de tiempo utilizados en la construcción de simulaciones de energía se derivan generalmente de estaciones meteorológicas situadas en las afueras de la ciudad. Por lo tanto, el efecto de la Isla de Calor Urbano (ICU no se considera en estos cálculos, lo que implica una importante falta de precisión. Centrado en explorar cómo incluir los fenómenos ICU, el presente trabajo recopila y analiza la dinámica por hora de la temperatura en diferentes lugares dentro de la ciudad de Madrid. Abstract This research is framed within the project MODIFICA (Predictive model - Buildings - Urban Heat Island, funded by Programa de I+D+i orientada a los retos de la sociedad 'Retos Investigación' 2013. It is aimed at developing a predictive model for dwelling energy performance under the Urban Heat Island (UHI effect in order to implement it in the evaluation of real energy demand and consumption in dwellings. Despite great advances on building energy performance have been achieved during the last years, weather files used in building energy simulations are usually derived from weather stations placed in the outskirts of the city. Hence, Urban Heat Island (UHI effect is not considered in this calculations, which implies an important lack of accuracy. Focused on exploring how to include the UHI phenomena, the present paper compiles and analyses the hourly dynamics

  18. The tsunami phenomenon

    Science.gov (United States)

    Röbke, B. R.; Vött, A.

    2017-12-01

    With human activity increasingly concentrating on coasts, tsunamis (from Japanese tsu = harbour, nami = wave) are a major natural hazard to today's society. Stimulated by disastrous tsunami impacts in recent years, for instance in south-east Asia (2004) or in Japan (2011), tsunami science has significantly flourished, which has brought great advances in hazard assessment and mitigation plans. Based on tsunami research of the last decades, this paper provides a thorough treatise on the tsunami phenomenon from a geoscientific point of view. Starting with the wave features, tsunamis are introduced as long shallow water waves or wave trains crossing entire oceans without major energy loss. At the coast, tsunamis typically show wave shoaling, funnelling and resonance effects as well as a significant run-up and backflow. Tsunami waves are caused by a sudden displacement of the water column due to a number of various trigger mechanisms. Such are earthquakes as the main trigger, submarine and subaerial mass wastings, volcanic activity, atmospheric disturbances (meteotsunamis) and cosmic impacts, as is demonstrated by giving corresponding examples from the past. Tsunamis are known to have a significant sedimentary and geomorphological off- and onshore response. So-called tsunamites form allochthonous high-energy deposits that are left at the coast during tsunami landfall. Tsunami deposits show typical sedimentary features, as basal erosional unconformities, fining-upward and -landward, a high content of marine fossils, rip-up clasts from underlying units and mud caps, all reflecting the hydrodynamic processes during inundation. The on- and offshore behaviour of tsunamis and related sedimentary processes can be simulated using hydro- and morphodynamic numerical models. The paper provides an overview of the basic tsunami modelling techniques, including discretisation, guidelines for appropriate temporal and spatial resolution as well as the nesting method. Furthermore, the

  19. A Numerical Study of the Urban Heat Island in the Coastal Tropical City of San Juan, Puerto Rico: Model Validation and Impacts of LCLU Changes

    Science.gov (United States)

    Comarazamy, Daniel E.; Gonzalez, Jorge E.; Luvall, Jeff; Rickman, Douglas L.

    2007-01-01

    Urban sprawls in tropical locations are rapidly accelerating and it is more evident in islands where a large percentage of the population resides along the coasts. This paper focuses on the analysis of the impacts of land use and land cover for urbanization in the tropical coastal city of San Juan, in the tropical island of Puerto Rico. A mesoscale numerical model, the Regional Atmospheric Modeling System (RAMS), is used to study specific characteristics and patterns of the urban heat island in the San Juan Metropolitan Area (SJMA), the most noticeable urban core of the Caribbean. The research present in this paper makes use of the observations obtained during the airborne San Juan Atlas Mission in two ways. First, surface and rawinsonde data are used to validate the atmospheric model yielding satisfactory results. Second, airborne remote sensing information is used to update the model's surface characteristics to obtain a detailed configuration of the SJMA in order to perform the LCLU changes impact analysis. This analysis showed that the presence of San Juan has an impact reflected in higher air temperatures over the area occupied by the city, with positive values of up to 2.5 C, for the simulations that have specified urban LCLU indexes in the bottom boundary. One interesting result of the impact analysis was the finding of a precipitation disturbance shown as a difference in total accumulated rainfall between simulation with the city and with a potential natural vegetation induced by the presence of the urban area. Model results indicate that the urban-induced cloud formation and precipitation development occur mainly downwind of the city, including the accumulated precipitation. This spatial pattern can be explained by the presence of a-larger urbanized area in the southwest sector of the city, and of the approaching northeasterly trade winds.

  20. Mapping the Influence of Land Use/Land Cover Changes on the Urban Heat Island Effect—A Case Study of Changchun, China

    Directory of Open Access Journals (Sweden)

    Chaobin Yang

    2017-02-01

    Full Text Available The spatio-temporal patterns of land use/land cover changes (LUCC can significantly affect the distribution and intensity of the urban heat island (UHI effect. However, few studies have mapped a clear picture of the influence of LUCC on UHI. In this study, both qualitative and quantitative models are employed to explore the effect of LUCC on UHI. UHI and LUCC maps were retrieved from Landsat data acquired from 1984, 1992, 2000, 2007, and 2014 to show their spatiotemporal patterns. The results showed that: (1 both the patterns of LUCC and UHI have had dramatic changes in the past 30 years. The urban area of Changchun increased more than four times, from 143.15 km2 in 1984 to 577.45 km2 in 2014, and the proportion of UHI regions has increased from 15.27% in 1984 to 29.62% in 2014; (2 the spatiotemporal changes in thermal environment were consistent with the process of urbanization. The average LST of the study area has been continuously increasing as many other land use types have been transformed to urban regions. The mean temperatures were higher in urban regions than rural areas over all of the periods, but the UHI intensity varied based on different measurements; and (3 the thermal environment inside the city varied widely even within a small area. The LST possesses a very strong positive relationship with impervious surface area (ISA, and the relationship has become stronger in recent years. The UHI we employ, specifically in this study, is SUHI (surface urban heat island.

  1. Island biogeography

    DEFF Research Database (Denmark)

    Whittaker, Robert James; Fernández-Palacios, José María; Matthews, Thomas J.

    2017-01-01

    Islands provide classic model biological systems. We review how growing appreciation of geoenvironmental dynamics of marine islands has led to advances in island biogeographic theory accommodating both evolutionary and ecological phenomena. Recognition of distinct island geodynamics permits gener...

  2. HOOLIGANISM – CONTEMPORARY SOCIAL PHENOMENON

    Directory of Open Access Journals (Sweden)

    MARIA LULESCU

    2012-05-01

    Full Text Available The proposed scientific theme is going to approach and study the hooliganism phenomenon as a contemporary social matter, in terms of conceptual and etiological. The present work has four main purposes: (1- that of explaining the meaning of hooliganism social phenomenon; (2- that of discovering the origins of hooliganism; (3- that of knowing which are the causes that encourages the occurence of the hooliganism; (4- that of knowing how to control and minimize this phenomenon.

  3. Shallow Groundwater Temperatures and the Urban Heat Island Effect: the First U.K City-wide Geothermal Map to Support Development of Ground Source Heating Systems Strategy

    Science.gov (United States)

    Patton, Ashley M.; Farr, Gareth J.; Boon, David P.; James, David R.; Williams, Bernard; Newell, Andrew J.

    2015-04-01

    The first UK city-wide heat map is described based on measurements of groundwater from a shallow superficial aquifer in the coastal city of Cardiff, Wales, UK. The UK Government has a target of reducing greenhouse gas emissions by 80% by 2050 (Climate Change Act 2008) and low carbon technologies are key to achieving this. To support the use of ground source heating we characterised the shallow heat potential of an urban aquifer to produce a baseline dataset which is intended to be used as a tool to inform developers and to underpin planning and regulation. We exploited an existing network of 168 groundwater monitoring boreholes across the city, recording the water temperature in each borehole at 1m depth intervals up to a depth of 20m. We recorded groundwater temperatures during the coldest part of 2014, and repeat profiling of the boreholes in different seasons has added a fourth dimension to our results and allowed us to characterise the maximum depth of seasonal temperature fluctuation. The temperature profiles were used to create a 3D model of heat potential within the aquifer using GOCAD® and the average borehole temperatures were contoured using Surfer® 10 to generate a 2D thermal resource map to support future assessment of urban Ground Source Heat Pumps prospectively. The average groundwater temperature in Cardiff was found to be above the average for England and Wales (11.3°C) with 90% of boreholes in excess of this figure by up to 4°C. The subsurface temperature profiles were also found to be higher than forecast by the predicted geothermal gradient for the area. Potential sources for heat include: conduction from buildings, basements and sub-surface infrastructure; insulation effects of the urban area and of the geology, and convection from leaking sewers. Other factors include recharge inhibition by drains, localised confinement and rock-water interaction in specific geology. It is likely to be a combination of multiple factors which we are hoping

  4. Impacts of city-block-scale countermeasures against urban heat-island phenomena upon a building's energy-consumption for air-conditioning

    Energy Technology Data Exchange (ETDEWEB)

    Kikegawa, Yukihiro [Department of Environmental Systems, Meisei University, 2-1-1 Hodokubo, Hino-shi, Tokyo 191-8506 (Japan); Genchi, Yutaka [Research Center for Life Cycle Assessment, National Institute of Advanced Industrial Science and Technology, 16-1 Onogawa, Tsukuba, Ibaraki 305-8569 (Japan); Kondo, Hiroaki [Institute for Environmental Management Technology, National Institute of Advanced Industrial Science and Technology, 16-1 Onogawa, Tsukuba, Ibaraki 305-8569 (Japan); Hanaki, Keisuke [Department of Urban Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan)

    2006-06-15

    This study quantifies the possible impacts of urban heat-island countermeasures upon buildings' energy use during summer in Tokyo metropolis. Considering the dependency of the buildings air temperature upon the local urban canopy structure, Tokyo urban canopies were classified in the city-block-scale using the sky-view factor (svf). Then, a multi-scale model system describing the interaction between buildings' energy use and urban meteorological conditions was applied to each classified canopy. In terms of urban warming alleviation and cooling energy saving, simulations suggested that the reduction in the air-conditioning anthropogenic heat could be the most effective measure in office buildings' canopies, and that vegetative fraction increase on the side walls of buildings in residential canopies. Both measures indicated daily and spatially averaged decreases in near-ground summer air temperature of 0.2-1.2{sup o}C. The simulations also suggested these temperature decreases could result in the buildings' cooling energy-savings of 4-40%, indicating remarkable savings in residential canopies. These temperature drops and energy savings tended to increase with the decrease of the svf of urban canopies. (author)

  5. Summertime heat island intensities in three high-rise housing quarters in inner-city Shanghai China: Building layout, density and greenery

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Feng; Lau, Stephen S.Y. [Department of Architecture, The University of Hong Kong, Pokfulam Road, Hong Kong SAR (China); Qian, Feng [College of Architecture and Urban Planning (CAUP), Tongji University, 1239 Siping Road, Shanghai, 200092 (China)

    2010-01-15

    Shanghai as the largest city in China has been suffering from the ever-worsening thermal environment due to the explosive urbanization rate. As an indication of urbanization impact, urban heat islands (UHI) can give rise to a variety of problems. This paper reports the results of an empirical study on the summertime UHI patterns in three high-rise residential quarters in the inner-city Shanghai. Site-means of UHI intensity are compared; case studies are carried out on strategically located measurement points; and regression analysis is followed to examine the significance of the on-site design variables in relation to UHI intensity. It is found that site characteristics in plot layout, density and greenery have different impacts on UHI-day and UHI-night patterns. Day-time UHI is closely related to site shading factor. Total site factor (TSF) as an integrated measure on solar admittance shows a higher explanatory power in UHI-day than sky view factor (SVF) does under a partially cloudy sky condition. Night-time UHI cannot be statistically well explained by the on-site variables in use, indicating influences from anthropogenic heat and other sources. Evaporative cooling by vegetation plays a more important role at night than it does at day. Considered diurnally, the semi-enclosed plot layout with a fairly high density and tree cover has the best outdoor thermal condition. Design implication based on the findings, with consideration on other important environmental design issues, is briefly discussed. (author)

  6. A comprehensive approach for the simulation of the Urban Heat Island effect with the WRF/SLUCM modeling system: The case of Athens (Greece)

    Science.gov (United States)

    Giannaros, Christos; Nenes, Athanasios; Giannaros, Theodore M.; Kourtidis, Konstantinos; Melas, Dimitrios

    2018-03-01

    This study presents a comprehensive modeling approach for simulating the spatiotemporal distribution of urban air temperatures with a modeling system that includes the Weather Research and Forecasting (WRF) model and the Single-Layer Urban Canopy Model (SLUCM) with a modified treatment of the impervious surface temperature. The model was applied to simulate a 3-day summer heat wave event over the city of Athens, Greece. The simulation, using default SLUCM parameters, is capable of capturing the observed diurnal variation of urban temperatures and the Urban Heat Island (UHI) in the greater Athens Area (GAA), albeit with systematic biases that are prominent during nighttime hours. These biases are particularly evident over low-intensity residential areas, and they are associated with the surface and urban canopy properties representing the urban environment. A series of sensitivity simulations unravels the importance of the sub-grid urban fraction parameter, surface albedo, and street canyon geometry in the overall causation and development of the UHI effect. The sensitivities are then used to determine optimal values of the street canyon geometry, which reproduces the observed temperatures throughout the simulation domain. The optimal parameters, apart from considerably improving model performance (reductions in mean temperature bias from 0.30 °C to 1.58 °C), are also consistent with actual city building characteristics - which gives confidence that the model set-up is robust, and can be used to study the UHI in the GAA in the anticipated warmer conditions in the future.

  7. Diffusion phenomenon for linear dissipative wave equations

    KAUST Repository

    Said-Houari, Belkacem

    2012-01-01

    In this paper we prove the diffusion phenomenon for the linear wave equation. To derive the diffusion phenomenon, a new method is used. In fact, for initial data in some weighted spaces, we prove that for {equation presented} decays with the rate {equation presented} [0,1] faster than that of either u or v, where u is the solution of the linear wave equation with initial data {equation presented} [0,1], and v is the solution of the related heat equation with initial data v 0 = u 0 + u 1. This result improves the result in H. Yang and A. Milani [Bull. Sci. Math. 124 (2000), 415-433] in the sense that, under the above restriction on the initial data, the decay rate given in that paper can be improved by t -γ/2. © European Mathematical Society.

  8. Turning up the heat: increasing temperature and coral bleaching at the high latitude coral reefs of the Houtman Abrolhos Islands.

    Science.gov (United States)

    Abdo, David A; Bellchambers, Lynda M; Evans, Scott N

    2012-01-01

    Coral reefs face increasing pressures particularly when on the edge of their distributions. The Houtman Abrolhos Islands (Abrolhos) are the southernmost coral reef system in the Indian Ocean, and one of the highest latitude reefs in the world. These reefs have a unique mix of tropical and temperate marine fauna and flora and support 184 species of coral, dominated by Acropora species. A significant La Niña event during 2011 produced anomalous conditions of increased temperature along the whole Western Australian coastline, producing the first-recorded widespread bleaching of corals at the Abrolhos. We examined long term trends in the marine climate at the Abrolhos using historical sea surface temperature data (HadISST data set) from 1900-2011. In addition in situ water temperature data for the Abrolhos (from data loggers installed in 2008, across four island groups) were used to determine temperature exposure profiles. Coupled with the results of coral cover surveys conducted annually since 2007; we calculated bleaching thresholds for monitoring sites across the four Abrolhos groups. In situ temperature data revealed maximum daily water temperatures reached 29.54°C in March 2011 which is 4.2°C above mean maximum daily temperatures (2008-2010). The level of bleaching varied across sites with an average of ∼12% of corals bleached. Mortality was high, with a mean ∼50% following the 2011 bleaching event. Prior to 2011, summer temperatures reached a mean (across all monitoring sites) of 25.1°C for 2.5 days. However, in 2011 temperatures reached a mean of 28.1°C for 3.3 days. Longer term trends (1900-2011) showed mean annual sea surface temperatures increase by 0.01°C per annum. Long-term temperature data along with short-term peaks in 2011, outline the potential for corals to be exposed to more frequent bleaching risk with consequences for this high latitude coral reef system at the edge of its distribution.

  9. Using Cool Roofs to Reduce Energy Use, Greenhouse Gas Emissions, and Urban Heat-island Effects: Findings from an India Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Akbari, Hashem; Xu, Tengfang; Taha, Haider; Wray, Craig; Sathaye, Jayant; Garg, Vishal; Tetali, Surekha; Babu, M. Hari; Reddy, K. Niranjan

    2011-05-25

    energy in India. Meteorological simulations in this study indicated that a reduction of 2C in air temperature in the Hyderabad area would be likely if a combination of increased surface albedo and vegetative cover are used as urban heat-island control strategies. In addition, air-temperature reductions on the order of 2.5-3.5C could be achieved if moderate and aggressive heat-island mitigation measures are adopted, respectively. A large-scale deployment of mitigation measures can bring additional indirect benefit to the urban area. For example, cooling outside air can improve the efficiency of cooling systems, reduce smog and greenhouse gas (GHG) emissions, and indirectly reduce pollution from power plants - all improving environmental health quality. This study has demonstrated the effectiveness of cool-roof technology as one of the urban heat-island control strategies for the Indian industrial and scientific communities and has provided an estimate of the national energy savings potential of cool roofs in India. These outcomes can be used for developing cool-roof building standards and related policies in India. Additional field studies, built upon the successes and lessons learned from this project, may be helpful to further confirm the scale of potential energy savings from the application of cooler roofs in various regions of India. In the future, a more rigorous meteorological simulation using urbanized (meso-urban) meteorological models should be conducted, which may produce a more accurate estimate of the air-temperature reductions for the entire urban area.

  10. THE ROMANIAN MIGRATIONAL EVOLUTION PHENOMENON

    Directory of Open Access Journals (Sweden)

    Cristian Raluca

    2009-05-01

    Full Text Available In our contemporary democratic society the migration phenomenon meets unknown valences in any previous societies. Free will and right to self-determination, much exploited by the XX century society., raised the possibility of interpretation of migration

  11. Effects of Green Space and Land Use/Land Cover on Urban Heat Island in a Subtropical Mega-city in China

    Science.gov (United States)

    Qiu, G. Y.; Li, X.; Li, H.; Guo, Q.

    2014-12-01

    With the quick expansion of urban in size and population, its urban heat island intensity (UHII, expressed as the temperature difference between urban and rural areas) increased rapidly. However, very few studies could quantitatively reveal the effects of green space and land use/land cover (LULC) on urban thermal environment because of lacking of the detailed measurement. This study focuses on quantifying the effects of green space and LULC on urban Heat Island (UHI) in Shenzhen, a mega subtropical city in China. Extensive measurements (air temperature and humidity) were made by mobile traverse method in a transect of 8 km in length, where a variety of LULC types were included. Measurements were carried out at 2 hours interval for 2 years (totally repeated for 7011 times). According to LULC types, we selected 5 different LULC types for studying, including water body, village in the city, shopping center (commercial area), urban green space (well-vegetated area) and suburb (forest). The main conclusions are obtained as follows: (1) The temperature difference between the 5 different urban landscapes is obvious, i.e. shopping center > village in the city > urban water body > urban green space > suburb; (2) Air temperature and UHII decreases linearly with the increase of green space in urban; (3) Green space and water body in urban have obvious effects to reduce the air temperature by evapotranspiration. Compared to the commercial areas, urban water body can relieve the IUHI by 0.9℃, while the urban green space can relieve the IUHI by 1.57℃. The cooling effect of the urban green space is better than that of the urban water body; (4) Periodic activity of human being has obvious effects on urban air temperature. The UHII on Saturday and Sunday are higher than that from Monday to Friday, respectively higher for 0.65, 0.57, 0.26 and 0.21℃. Thursday and Friday have the minimum air temperature and UHII. These results indicate that increase in urban evapotranspiration

  12. Integrating local urban climate modelling and mobile sensor data for personal exposure assessments in the context of urban heat island effect

    Science.gov (United States)

    Ueberham, Maximilian; Hertel, Daniel; Schlink, Uwe

    2017-04-01

    Deeper knowledge about urban climate conditions is getting more important in the context of climate change, urban population growth, urban compaction and continued surface sealing. Especially the urban heat island effect (UHI) is one of the most significant human induced alterations of Earth's surface climate. According to this the appearance frequency of heat waves in cities will increase with deep impacts on personal thermal comfort, human health and local residential quality of citizens. UHI can be very heterogenic within a city and research needs to focus more on the neighborhood scale perspective to get further insights about the heat burden of individuals. However, up to now, few is known about local thermal environmental variances and personal exposure loads. To monitor these processes and the impact on individuals, improved monitoring approaches are crucial, complementing data recorded at conventional fixed stations. Therefore we emphasize the importance of micro-meteorological modelling and mobile measurements to shed new light on the nexus of urban human-climate interactions. Contributing to this research we jointly present the approaches of our two PhD-projects. Firstly we illustrate on the basis of an example site, how local thermal conditions in an urban district can be simulated and predicted by a micro-meteorological model. Secondly we highlight the potentials of personal exposure measurements based on an evaluation of mobile micro-sensing devices (MSDs) and analyze and explain differences between model predictions and mobile records. For the examination of local thermal conditions we calculated ENVI-met simulations within the "Bayerischer Bahnhof" quarter in Leipzig (Saxony, Germany; 51°20', 12°22'). To accomplish the maximum temperature contrasts within the diverse built-up structures we chose a hot summer day (25 Aug 2016) under autochthonous weather conditions. From these simulations we analyzed a UHI effect between the model core (urban area

  13. Dynamics and controls of urban heat sink and island phenomena in a desert city: Development of a local climate zone scheme using remotely-sensed inputs

    Science.gov (United States)

    Nassar, Ahmed K.; Blackburn, G. Alan; Whyatt, J. Duncan

    2016-09-01

    This study aims to determine the dynamics and controls of Surface Urban Heat Sinks (SUHS) and Surface Urban Heat Islands (SUHI) in desert cities, using Dubai as a case study. A Local Climate Zone (LCZ) schema was developed to subdivide the city into different zones based on similarities in land cover and urban geometry. Proximity to the Gulf Coast was also determined for each LCZ. The LCZs were then used to sample seasonal and daily imagery from the MODIS thermal sensor to determine Land Surface Temperature (LST) variations relative to desert sand. Canonical correlation techniques were then applied to determine which factors explained the variability between urban and desert LST. Our results indicate that the daytime SUHS effect is greatest during the summer months (typically ∼3.0 °C) with the strongest cooling effects in open high-rise zones of the city. In contrast, the night-time SUHI effect is greatest during the winter months (typically ∼3.5 °C) with the strongest warming effects in compact mid-rise zones of the city. Proximity to the Arabian Gulf had the largest influence on both SUHS and SUHI phenomena, promoting daytime cooling in the summer months and night-time warming in the winter months. However, other parameters associated with the urban environment such as building height had an influence on daytime cooling, with larger buildings promoting shade and variations in airflow. Likewise, other parameters such as sky view factor contributed to night-time warming, with higher temperatures associated with limited views of the sky.

  14. Effects of steam-heating processes on a stratified volcanic aquifer: Stable isotopes and dissolved gases in thermal waters of Vulcano Island (Aeolian archipelago)

    Science.gov (United States)

    Federico, C.; Capasso, G.; Paonita, A.; Favara, R.

    2010-05-01

    We report on a comprehensive study of major-ion chemistry, dissolved gases, and stable isotopes measured in water wells at Vulcano Island since 1988. The work focuses on a quantitative model describing steam condensation and boiling phenomena in shallow water bodies. The model is based on the differences in partition coefficients between liquid water and vapor characterizing oxygen and hydrogen isotopes, as well as volcanic gases (CO 2, S species, and HCl). Based on both physical conditions of aquifers identified during drilling campaigns and the composition of the volcanic vapor, mass and enthalpy balances are applied in a multistep process of steam separation and condensation in shallower aquifers. By comparing the model results with measured data, we infer that (i) strong isotope enrichment observed in some shallow thermal waters can result from an increasing mass rate of condensing deep vapor, even in water meteoric in origin; (ii) the high CO 2 content measured in the fumarolic vapor during 1988-1993 affected the δ18O value of the steam-heated water due to CO 2-H 2O isotope exchange; (iii) the high pCO 2 measured in the coldest and peripheral waters are explained by the progressive enrichment of this gas in the vapor phase during multistep boiling; and (iv) the high Cl - and SO 42-contents in the hottest waters can be attributed to the direct condensation (single-step) of volcanic vapor. The model also takes into account both the mass fluxes and the compositions of the involved endmembers (steam and shallow groundwater), which provides important inferences on the modifications observed or expected during periods of increasing mass and heat input from depth.

  15. Modeling nexus of urban heat island mitigation strategies with electricity/power usage and consumer costs: a case study for Phoenix, Arizona, USA

    Science.gov (United States)

    Silva, Humberto; Fillpot, Baron S.

    2018-01-01

    A reduction in both power and electricity usage was determined using a previously validated zero-dimensional energy balance model that implements mitigation strategies used to reduce the urban heat island (UHI) effect. The established model has been applied to show the change in urban characteristic temperature when executing four common mitigation strategies: increasing the overall (1) emissivity, (2) vegetated area, (3) thermal conductivity, and (4) albedo of the urban environment in a series of increases by 5, 10, 15, and 20% from baseline values. Separately, a correlation analysis was performed involving meteorological data and total daily energy (TDE) consumption where the 24-h average temperature was shown to have the greatest correlation to electricity service data in the Phoenix, Arizona, USA, metropolitan region. A methodology was then developed for using the model to predict TDE consumption reduction and corresponding cost-saving analysis when implementing the four mitigation strategies. The four modeled UHI mitigation strategies, taken in combination, would lead to the largest percent reduction in annual energy usage, where increasing the thermal conductivity is the single most effective mitigation strategy. The single least effective mitigation strategy, increasing the emissivity by 5% from the baseline value, resulted in an average calculated reduction of about 1570 GWh in yearly energy usage with a corresponding 157 million dollar cost savings. When the four parameters were increased in unison by 20% from baseline values, an average calculated reduction of about 2050 GWh in yearly energy usage was predicted with a corresponding 205 million dollar cost savings.

  16. Urban Heat Island Simulations in Guangzhou, China, Using the Coupled WRF/UCM Model with a Land Use Map Extracted from Remote Sensing Data

    Directory of Open Access Journals (Sweden)

    Guang Chen

    2016-07-01

    Full Text Available The Weather Research and Forecasting (WRF model coupled with an Urban Canopy Model (UCM was used for studying urban environmental issues. Because land use data employed in the WRF model do not agree with the current situation around Guangzhou, China, the performance of WRF/UCM with new land-use data extracted from Remote Sensing (RS data was evaluated in early August 2012. Results from simulations reveal that experiments with the extracted data are capable of reasonable reproductions of the majority of the observed temporal characteristics of the 2-m temperature, and can capture the characteristics of Urban Heat Island (UHI. The “UCM_12” simulation, which employed the extracted land-use data with the WRF/UCM model, provided the best reproduction of the 2-m temperature data evolution and the smallest minimum absolute average error when compared with the other two experiments without coupled UCM. The contributions of various factors to the UHI effect were analyzed by comparing the energy equilibrium processes of “UCM_12” in urban and suburban areas. Analysis revealed that energy equilibrium processes with new land use data can explain the diurnal character of the UHI intensity variation. Furthermore, land use data extracted from RS can be used to simulate the UHI.

  17. Quantifying the Trends in Land Surface Temperature and Surface Urban Heat Island Intensity in Mediterranean Cities in View of Smart Urbanization

    Directory of Open Access Journals (Sweden)

    Anastasios Polydoros

    2018-02-01

    Full Text Available Land Surface Temperature (LST is a key parameter for the estimation of urban fluxes as well as for the assessment of the presence and strength of the surface urban heat island (SUHI. In an urban environment, LST depends on the way the city has been planned and developed over time. To this end, the estimation of LST needs adequate spatial and temporal data at the urban scale, especially with respect to land cover/land use. The present study is divided in two parts: at first, satellite data from MODIS-Terra 8-day product (MOD11A2 were used for the analysis of an eighteen-year time series (2001–2017 of the LST spatial and temporal distribution in five major cities of the Mediterranean during the summer months. LST trends were retrieved and assessed for their statistical significance. Secondly, LST values and trends for each city were examined in relation to land cover characteristics and patterns in order to define the contribution of urban development and planning on LST; this information is important for the drafting of smart urbanization policies and measures. Results revealed (a positive LST trends in the urban areas especially during nighttime ranging from +0.412 °K in Marseille to +0.923 °K in Cairo and (b the SUHI has intensified during the last eighteen years especially during daytime in European Mediterranean cities, such as Rome (+0.332 °K and Barcelona (+0.307 °K.

  18. Koebner Phenomenon and Mycosis Fungoides

    Directory of Open Access Journals (Sweden)

    Eve Lebas

    2015-10-01

    Full Text Available Mycosis fungoides (MF is the most frequent type of primary cutaneous T-cell/NK-cell lymphoma. The Koebner phenomenon is defined as the appearance of cutaneous lesions on previously noninvolved skin following trauma and is observed in a series of cutaneous diseases including psoriasis, lichen planus, viral warts, molluscum contagiosum, etc. In this case report, 3 patients with longstanding MF are presented, the 1st with the appearance of a circumscribed early-stage type MF lesion rapidly following a surgical excision of an infundibular cyst, the 2nd with the appearance of a unique unilateral palmar tumoral MF lesion at the pressure site of a crutch, and the 3rd presented localized MF early stage lesions at the friction site of a belt. This report suggests that some MF patients may experience Koebner phenomenon-induced MF lesions and that MF should be added to the long list of skin diseases potentially exhibiting the Koebner phenomenon.

  19. Charge Islands Through Tunneling

    Science.gov (United States)

    Robinson, Daryl C.

    2002-01-01

    It has been recently reported that the electrical charge in a semiconductive carbon nanotube is not evenly distributed, but rather it is divided into charge "islands." This paper links the aforementioned phenomenon to tunneling and provides further insight into the higher rate of tunneling processes, which makes tunneling devices attractive. This paper also provides a basis for calculating the charge profile over the length of the tube so that nanoscale devices' conductive properties may be fully exploited.

  20. Canary Islands

    Science.gov (United States)

    1992-01-01

    This easterly looking view shows the seven major volcanic islands of the Canary Island chain (28.0N, 16.5W) and offers a unique view of the islands that have become a frequent vacation spot for Europeans. The northwest coastline of Africa, (Morocco and Western Sahara), is visible in the background. Frequently, these islands create an impact on local weather (cloud formations) and ocean currents (island wakes) as seen in this photo.

  1. The Three Mile Island Disaster.

    Science.gov (United States)

    Crosby, Emeral

    1980-01-01

    For the past decade, education has been experiencing meltdown, explosions, radiation leaks, heat pollution, and management crises, just like the Three Mile Island disaster. This article offers suggestions on how to deal with these problems. (Author/LD)

  2. Urban Heat Islands of the World's Major Cities Revealed at Multiple Scales Using Both Station Observations and Complementary Remotely Sensed Data Products

    Science.gov (United States)

    Nguyen, L. H.; Krehbiel, C.; Henebry, G. M.

    2016-12-01

    Urban heat islands (UHIs) have long been studied using both ground-based observations of air temperature and remotely sensed data. In the rapidly urbanizing world, cross-comparison between various datasets will allow us to characterize and model UHI effects more generally. Here we analyze UHIs of the world's major cities using station observations from the Global Historical Climate Network (GHCN), surface air temperatures derived from Advanced Microwave Scanning Radiometers (AMSRs), and land surface temperatures (LST) estimated from Moderate-resolution Imaging Spectroradiometer (MODIS). We compute the two measurements of thermal time (accumulated diurnal degree-days or ADDD and nocturnal degree-days or ANDD) and the normalized difference accumulated thermal time index (NDATTI) to characterize urban and rural thermal differences and day-night dynamics over multiple growing seasons. Our preliminary results for 27 major cities and 83 urban-rural groupings in the USA and Canada indicate that daytime urban thermal accumulations from the passive microwave data (AMSRs) were generally lower than in adjacent rural areas, with only 18% of urban-rural groupings showing higher thermal accumulations in cities. In contrast, station observations and MODIS LST showed consistently higher ADDD in cities (82% and 93% for GHCN and MODIS data respectively). UHIs are more pronounced at night, with 55% (AMSR), 93% (GHCN) and 100% (MODIS) of urban-rural groupings showing higher ANDD in cities. Humidity appears to be a common factor driving the day-night thermal dynamics throughout all three datasets (Figure 1). Normalized day-night differences in thermal time metrics were consistently lower (>90% of urban-rural groupings) in urban than rural areas for both air temperature datasets (GHCN and AMSRs). With MODIS LST, only 70% of urban-rural groupings show lower NDATTI in cities. We will present results for the rest of the globe.

  3. An assessment of urban heat island effect adopting urban parameterizations in COSMO-CLM simulations over big cities in Northern Italy

    Science.gov (United States)

    Montesarchio, Myriam; Rianna, Guido; Mercogliano, Paola; Castellari, Sergio; Schiano, Pasquale

    2015-04-01

    In Europe, about 80% of people live in urban areas, which most of them can be particularly vulnerable to climate impacts (e.g. high air temperatures along with heat waves, flooding due to intense precipitation events, water scarcity and droughts). In fact, the density of people and assets within relatively small geographic areas, such as an urban settlements, mean more risk exposure than in rural areas. Therefore, reliable numerical climate models are needed for elaborating climate risk assessment at urban scale. These models must take into account the effects of the complex three-dimensional structure of urban settlements, combined with the mixture of surface types with contrasting radiative, thermal and moisture characteristics. In this respect, previous studies (e.g. Trusilova et al., 2013) have already assessed the importance to consider urban properties in very high resolution regional climate modeling to better reproduce the features of urban climate, especially in terms of urban heat island effect. In this work, two different configurations of the regional climate model COSMO-CLM at the horizontal resolution of 0.02° (about 2.2km), one including urban parameterization scheme and another without including them, have been applied in order to perform two different climate simulations covering the entire northern Italy. In particular, the present study is focused on large urban settlements such as Milan and Turin. Due to high computational cost required to run very high resolution simulations, the results of the two simulations have been compared over a period of ten years, from 1980 to 1989. Preliminary results indicate that the modification of climate conditions, due to the presence of urban areas, is present mainly in the areas covered by big cities and surrounding them, or rather the presence of urban areas induces modification mainly in their local climate. Other evidences are that the simulation including urban parameterization scheme shows, in general

  4. Rescuing--a universal phenomenon.

    Science.gov (United States)

    Little, John

    2014-12-01

    Rescuing, where the person is delivered from the immediacy of their conundrum by another, complicates management. The object of this paper is to understand the difficulty in relinquishing the rescuing role. Rescuing is a universal phenomenon in parenting, teaching and therapy that has developed over time through a variety of interwoven social, economic, psychological and clinical variables. © The Royal Australian and New Zealand College of Psychiatrists 2014.

  5. Simulations of Moscow megacity heat island with the COSMO-CLM model using two different urban canopy schemes and realistic building parameters, derived from OpenStreetMap data

    Science.gov (United States)

    Varentsov, Mikhail; Wouters, Hendrik; Trusilova, Kristina; Samsonov, Timofey; Konstantinov, Pavel

    2017-04-01

    In this study we present the application of the regional climate model COSMO-CLM to simulate urban heat island (UHI) phenomenon for Moscow megacity, which is the biggest agglomeration in Europe (with modern population of more than 17 million people). Significant differences of Moscow from the cities of Western Europe are related with much more continental climate with higher diurnal and annual temperature variations, and with specific building features such as its high density and almost total predominance of high-rise and low-rise blocks of flats on the private low-rise houses. Because of these building and climate features, the UHI of Moscow megacity is stronger than UHIs of many other cities of the similar size, with a mean intensity is about 2 °C and maximum intensity reaching up to 13 °C (Lokoschenko, 2014). Such a pronounced UHI together with the existence of an extensive observation network (more than 50 weather and air quality monitoring stations and few microwave temperature profilers) within the city and its surrounding make Moscow an especially interesting place for urban climate researches and good testbed for urban canopy models. In our numerical experiments, regional climate model firstly was adapted for investigated region with aim to improve quality of its simulations of rural areas. Then, to take into account urban canopy effects on thermal regime of the urbanized areas, we used two different versions of COSMO-CLM model. First is coupled with TEB (Town Energy Balance) single layer urban canopy model (Trusilova, 2013), and second is extended with bulk urban canopy scheme TERRA_URB using the Semi-empircal URban-canopY dependency parametriation SURY (Wouters et. al, 2016). Numerical experiments with these two versions of the model were run with spatial resolution about 1 km for several summer and winter months. To provide specific parameters, required for urban parameterizations, such as urban fraction, building height and street canyon aspect ratio

  6. Cool city mornings by urban heat

    Science.gov (United States)

    Theeuwes, Natalie E.; Steeneveld, Gert-Jan; Ronda, Reinder J.; Rotach, Mathias W.; Holtslag, Albert A. M.

    2015-11-01

    The urban heat island effect is a phenomenon observed worldwide, i.e. evening and nocturnal temperatures in cities are usually several degrees higher than in the surrounding countryside. In contrast, cities are sometimes found to be cooler than their rural surroundings in the morning and early afternoon. Here, a general physical explanation for this so-called daytime urban cool island (UCI) effect is presented and validated for the cloud-free days in the BUBBLE campaign in Basel, Switzerland. Simulations with a widely evaluated conceptual atmospheric boundary-layer model coupled to a land-surface model, reveal that the UCI can form due to differences between the early morning mixed-layer depth over the city (deeper) and over the countryside (shallower). The magnitude of the UCI is estimated for various types of urban morphology, categorized by their respective local climate zones.

  7. Resonance phenomenon in classical cepheids

    International Nuclear Information System (INIS)

    Takeuti, Mine; Aikawa, Toshiki

    1981-01-01

    To investigate resonance phenomenon in classical cepheids, the non-linear radial oscillation of stars is studied based on the assumption that the non-adiabatic perturbation is expressed in terms of van der Pol's type damping. Two- and three-wave resonance in this system is applied to classical cepheids to describe their bump and double-mode behavior. The phase of bump and the depression of amplitude are explained for bump cepheids. The double-periodicity is shown by the enhancement of the third overtone in three-wave resonance. Non-linear effect on resonant period is also discussed briefly. (author)

  8. Analysis of seasonal variation in urban heat island effect for West Mediterranean Region of Turkey using Landsat 8 OLI/TIRS data

    Science.gov (United States)

    Aslan, Nagihan; KOC-SAN, Dilek

    2016-07-01

    Technological developments are accelerating day by day in 21st century which has brought social and economic developments. Besides, the word population is increasing rapidly and the majority of population lives in city center. Large and crowded cities, industrial areas and shopping centers are being built for providing human needs and wishes. For these purposes, natural resources are destroyed and urban climate is affected. The temperatures of urban areas can be warmer than the rural areas and differences in temperature between urban and surrounding rural areas were defined as Urban Heat Island (UHI). The objectives of this study are (i) to calculate Land Surface Temperatures (LST) for urban and vegetation areas in the selected cities, (ii) to determine the UHI effects and its change between seasons, (iii) to examine the relationship between city size and UHI effect magnitude. In this study, Landsat 8 OLI/TIRS imageries for winter (23 December 2013), summer (17 June 2014) and autumn (7 October 2014) seasons were used. The Antalya, Burdur and Isparta provinces that are placed in West Mediterranean Region of Turkey were selected as study areas. These three provinces have different characteristics. Antalya is the fifth biggest city of Turkey and its population growth is quite high. In addition, the summer population of this city increases severely, because of its tourism potential. On the other hand, Isparta and Burdur are relatively small cities when compared to Antalya with respect to population and urban area. In this study, firstly, the brightness temperatures and LST values are calculated from Landsat 8 thermal images. Secondly, urban areas are identified by an approach that combines emissivity image, Defense Meteorological Satellite Program - Operational Linescan System (DMSP/OLS) nighttime lights data and ASTER Global Digital Elevation Model (GDEM). In addition, the vegetation areas are defined by using emissivity image. Finally, the UHI effect is determined

  9. A review of CCFL phenomenon

    International Nuclear Information System (INIS)

    Al Issa, S.; Macian, R.

    2011-01-01

    Highlights: → CCFL mechanisms, correlations, parameters and related variables were reviewed extensively. → Consideration of geometrical effects is crucial for meaningful comparison and review. → Differentiation between 'onset of CCFL' and 'deflooding/partial delivery' data is required. → Following 2+3, new correlations for onset of CCFL according to liquid velocity ranges were suggested. → Large number of correlations was compared against large data bank that considers points 2+3. - Abstract: Counter current flow limitation CCFL is an important phenomenon for numerous engineering applications and safety of light water reactors. In particular, the possible occurrence of CCFL in the hot-leg of a PWR during SBLOCA or LOCA accidents is of special interest for nuclear safety research. A review of the related literature has made in order to present the most important studies about the phenomenon and to reach common general understanding of the different factors that govern CCFL. Eventually this will allow explaining contradictions among different explanations provided by different authors. Most important factors were geometrical characteristics, liquid superficial velocity, and physical properties. The review shows that despite numerous experimental works, many scaling and geometrical effects are still not fully understood. For Instance there exist no consistent explanation of the channel diameter and inclined riser length effect upon results. The same can be stated-though to a minimum extent - for the inclination angle while channel length (or channel to diameter ratio) effect was clear and consistent. Since most experimental work was done in down-scaled hot-leg simulators, it becomes interesting to build a coherent knowledge about these effects and to explain arising contradictions in order to safely extrapolate results to full-scale hot-leg. The review has shown that many differences were simply due to geometrical effects, this leads to the need to

  10. The Phenomenon of Dental Fear

    DEFF Research Database (Denmark)

    Moore, Rod

    Odontophobia is a rather unique phobia with special psychosomatic components that impact on the dental health of odontophobic persons. It also has psychosocial components largely as a result of destruction of the teeth and subsequent embarrassment that can affect a person and cause a vicious cycle...... of dental fear (see fig. 1). The phenomenon is facilitated by misunderstandings and myths generated by both patients and dentists (see table 1 for examples). The most common reasons given in the literature for such strong fears of dental treatment are: 1) bad experiences in childhood for 85% of cases, 2......) feeling of powerlessness and lack of control over personal emotional reactions and over the social situation in the dental chair, 3) social learning processes in which the image of the dentist is cast in a negative light by the mass media or by the person's relatives or friends and 4) that the person has...

  11. New Phenomenon of Commercial Corruption

    Directory of Open Access Journals (Sweden)

    Krzysztof Nowakowski

    2011-07-01

    Full Text Available This article is about increase corruption in private sector as commercial corruption. This establishes a wide understanding of that phenomenon in social science and law. Corruption and bribery are types of fraud and are linked with the private sector too. Although certain types of corruption will decline as the private sector grows and consolidates, other new types involving private sector firms may increase. The commercial corruption can be described as relation inside of an organization and as relation between firms. Corruption in private sector in Poland is connected with social distrust and specific organizational culture, too. Commercial corruption is a familiar feature of their societies and has been the focus of law enforcement and institutional reform. Many others problems do not change the fact that such corruption is a new important problem and causes lost of competitiveness and creates a substitute for fair market and competition in Polish economy and abroad.

  12. Vascular diagnostics for Raynaud's phenomenon

    Directory of Open Access Journals (Sweden)

    Dinsdale G

    2014-10-01

    Full Text Available Graham Dinsdale, Ariane L Herrick Centre for Musculoskeletal Research, Institute of Inflammation and Repair, Salford Royal NHS Foundation Trust, University of Manchester, Manchester Academic Health Science Centre, Manchester, UK Abstract: Raynaud's phenomenon (RP is common, and in most patients is primary (idiopathic when due to reversible vasospasm and does not progress to irreversible tissue injury. However, in those patients for whom RP is secondary to an underlying disease (eg, systemic sclerosis or atherosclerosis, progression to digital ulceration or critical ischemia can occur. Therefore, the key question for the clinician is “Why does this patient have RP?” Vascular diagnostics play a key role in answering this. In this review, we firstly discuss the different vascular investigations relevant to clinical practice: nail fold capillaroscopy (including the different methodologies for examining the nail fold capillaries, and the role of capillaroscopy in helping to differentiate between primary and systemic sclerosis-related RP, thermography (available in specialist centers, and evaluation of large vessel disease (for example, due to atherosclerosis. We then discuss research tools, mainly laser Doppler methods, including laser Doppler imaging and laser speckle contrast imaging. These are commercially available as complete imaging systems and are (relatively easy to use. The main current goal in vascular imaging research is to validate these novel state-of-the-art techniques as outcome measures of digital vascular disease, and then apply them in early and later phase studies of new treatment approaches, thus facilitating drug development programs. Keywords: Raynaud's phenomenon, systemic sclerosis, nail fold capillaroscopy, thermography, laser Doppler, angiography

  13. Leidenfrost phenomenon on conical surfaces

    Science.gov (United States)

    Hidalgo-Caballero, S.; Escobar-Ortega, Y.; Pacheco-Vázquez, F.

    2016-09-01

    The Leidenfrost state is typically studied by placing droplets on flat or slightly curved surfaces. Here this phenomenon is investigated by depositing water in hot conical bowls. We found that this phase exists even for large amounts of liquid in very narrow cones without considerable effect of the confinement on the Leidenfrost transition temperature TL. At a fixed temperature, T >TL , the total evaporation time τ has a nonmonotonic dependence on the angle of confinement θ : for large volumes (˜20 ml) on flat surfaces (θ ˜0∘ ), vapor chimneys appear and accelerate the evaporation rate, their frequency diminishes as θ augments and becomes zero at a certain angle θc, at which τ reaches its maximum value; then, τ decreases again at larger angles because the vapor layer holding up the water becomes thinner due to the increase of hydrostatic pressure and because the geometry facilitates the vapor expulsion along the conical wall. For small volumes (˜1 ml), surface tension mainly determines the drop curvature and the lifetime is practically independent of θ . Different chimney regimes and oscillation patterns were observed and summarized in a phase diagram. Finally, we developed a simple model to decipher the shape adopted by the liquid volume and its evolution as a function of time, and the predictions are in good agreement with the experimental results.

  14. Marshall Islands

    OpenAIRE

    World Bank

    2015-01-01

    This note aims to build understanding of the existing disaster risk financing and insurance (DRFI) tools in use in The Marshall Islands and to identify gaps where potential engagement could further develop financial resilience. The likelihood that a hazardous event will have a significant impact on the Marshall Islands has risen with the increasing levels of population and assets in the urban ...

  15. The phenomenon of retarded potentials

    International Nuclear Information System (INIS)

    Noskov, N.K.

    2003-01-01

    The logic simulation of process of time delay of potential on a moved body - recipient resulted in the deduction about cyclic irregularity of time delay, that means, that the moved body makes longitudinal vibrations. A conclusion is drawn that length of longitudinal vibrations depending from three variable: the law of interaction, spacing interval between bodies of interaction and phase velocity looks like: λ=Hv ph /R·F(R) (1), where λ- length of oscillations; H- factor of proportionality; v ph - phase velocity of a body; R - distance between test and central bodies R(t); F(R) - law of interaction. So far as λ=v ph /v, and R·F(R)=∫ ∞ R F(R)dR=E move , then formula (1) will be transformed into: E move =Hv pv /λ=Hv. Thus, the energy of radiating having the similar law is only reflex of motion of a matter. The energy of oscillating motion can be expressed through linear maximal velocity. It is established, that different expressions of the same energy, result in the law of a view of a proportion for lengths of de Broglie's waves: It shows that de Broglie's waves - the actual oscillating motions of bodies, as demonstrate interference and diffraction pictures at a dissipation of the accelerated particles on crystalline gratings. This deduction has far-reaching consequences for finding - out of the cause bases of the laws of a nature. So, the quantum mechanics becomes partition of mechanics of solids and is comprises all interactions. The nuclear energy is not 'defect of mass', but is 'defect' of energy of oscillating motion: ΔE=H v1 -H v2 . Definition of real cause of nuclear energy is very important for construction of model of nuclei and for development of physics as the whole. The interconnection of the phenomenon of longitudinal vibrations of moved bodies, as result of irregularity of time delay of potential, with many other natural phenomena is looked through. By such, as: motion of planets and electrons on elliptical orbits, oscillating of dipping drips

  16. Risk as a social phenomenon.

    Science.gov (United States)

    Jamison, Wesley V

    2003-01-01

    What do nuclear power, smoking, and eating beef have in common? The answer is multifaceted. They all share aspects of mass production and consumption, and therefore consumer confidence comes into play in evaluating each of the products' merits. They all produce some level of anxiety--be it in response to adverse media coverage, or the successes of adversarial interest groups in publicizing those products' weaknesses--among consumers who wonder what if any level of the product should be consumed. Finally, nuclear power, smoking, and eating beef all share risk; that is, the perceived and real detriments of producing and consuming those products. Whether or not the associated risks--from increased cancer to increased heart disease--are real is beside the point. When talking about risk, scientific education must deal with the perception of risk as much as its reality. Risk is a socially defined phenomenon, and as such, the successful scientists/communicator must understand the social evaluations of it. While many scientists take a rational view of risk evaluation and consumers often make rational decisions about technological and scientific risk based upon the costs and benefits of that technology, this approach is problematic for three reasons. First, the nature of modern risks has changed in that risk is complex, incomprehensible and uncontrollable to the average person. Second, the rational approach assumes that all costs and benefits of a technology, both real and potential, both current and future, can be known and therefore rationally evaluated. This is not the case. Third, evidence from Europe indicates that trust in information sources about risk has fallen, and thus classic scientific education campaigns that rely upon increasing public knowledge and acceptance of technological and scientific risk are problematic. Because of these factors we argue that effective scientific response must begin to understand the social components of risk if campaigns to shape

  17. The heat spells of Mexico City

    Directory of Open Access Journals (Sweden)

    Ernesto Jáuregui

    2010-06-01

    Full Text Available The warning of urban air has been documented to increase in intensity and area as cities grow (Oke, 1982. As the cities grow the so called “heat island” tends to increase the risk of more frequent heat waves as well as their impacts (IPCC, 2001. Threshold values to define a heat wave vary geographically. For the case of Mexico City located in a high inland valley in the tropics, values above 30° C (daily maximum observed for three or more consecutive days and 25° C or more as mean temperature have been adopted to define the phenomenon. These events occur at the end of the dry season during March to May when afternoon relative humidity is quite low (∼20% and thus reducing the stress. Maximum temperatute data from the Observatory of the National Meteorological Service were used. Results show that during the second half of the XXth century the frequency of heat waves as defined above has doubled from 6 events/decade to 16/decade in the 1990s with a marked increase in the last third of the last century when population of the city grew from 8.5 to 18.5 million (CONAPO, 2000. During this time the average urban/rural contrast grew considerably from about 6° C to 10° C (Jáuregui, 1986. While these heat waves may be considered as “mild”they receive attention from the media and prompt actions by the population to relieve the heat stress. Application of heat indices based on the human energy balance (PET and PMV result in moderate to strong heat stress during these events. Because climate change is expected to raise nighttime minimum temperatures more than daytime highs (as suggested by the IPCC, 2001 urban heat islands and their related heat waves are likely to be a significant health concern in days to come in large urban centers especially in the developing countries.

  18. [Rhytidectomy and Raynaud's phenomenon: about two cases].

    Science.gov (United States)

    Nicolas, J; Labbé, D

    2004-12-01

    Raynaud's phenomenon is a currently vascular syndrome (8 to 10% of women and 3 to 5% of men). It was defined as episodic ischaemia of the fingers, toes, nose, ears and nipples, which presents clinically as pallor, cyanosis, and often rubor of the skins, in response to cold, emotional stimuli and vasoconstriction agents. The phenomenon is caused by a vasoconstriction of arterials skin. In severe forms of the phenomenon, we can see ulcerations and necrosis. We report here two cases of rhytidectomy flap necrosis in Raynaud's Phenomenon. After review of literature, we explain the elements of physiopathology whose can explain these complications and we try to establish recommendations to these complications.

  19. A Study of the Oklahoma City Urban Heat Island Effect Using a WRF/Single-Layer Urban Canopy Model, a Joint Urban 2003 Field Campaign, and MODIS Satellite Observations

    Directory of Open Access Journals (Sweden)

    Hengyue Zhang

    2017-09-01

    Full Text Available The urban heat island effect (UHI for inner land regions was investigated using satellite data, ground observations, and simulations with an Single-Layer Urban Canopy Parameterization (SLUCP coupled into the regional Weather Research Forecasting model (WRF, http://wrf-model.org/index.php. Specifically, using the satellite-observed surface skin temperatures (Tskin, the intensity of the UHI was first compared for two inland cities (Xi’an City, China, and Oklahoma City (OKC, which have different city populations and building densities. The larger population density and larger building density in Xi’an lead to a stronger skin-level UHI by 2 °C. However, the ground observed 2 m surface air temperature (Tair observations showed an urban cooling island effect (UCI over the downtown region in OKC during the daytime of 19 July 2003, from a DOE field campaign (Joint Urban 2003. To understand this contrast between satellite-based Tskin and ground-based Tair, a sensitivity study using WRF/SLUCP was analyzed. The model reproduced a UCI in OKC. Furthermore, WRF/Noah/SLUCM simulations were also compared with the Joint Urban 2003 ground observations, including wind speeds, wind directions, and energy fluxes. Although the WRF/SLUCM model failed to simulate these variables accurately, it reproduced the diurnal variations of surface temperatures, wind speeds, wind directions, and energy fluxes reasonably well.

  20. Electron string phenomenon: physics and use

    Science.gov (United States)

    Donets, Evgeny D.

    2004-01-01

    Electron string phenomenon arises as a result of phase transition of a state of multiply reflected electron beam to this new discovered state of one component electron plasma and can be easily observed in the reflex mode of EBIS operation. The transition goes via a strong instability, which causes considerable electron energy spread, which in its turn suppresses the instability. Electron string state is a stationary state of hot pure electron plasma, which is heated by injected electron beam and cooled because of electron loses. Electron string is quiet in broad regions of experimental parameters, so that it is used for confinement and ionization of positive ions by electron impact to highly charge states similar to electron beams in EBIS. Application of electron strings instead of electron beams for ion production allows to save about 99% of electric power of electron beam and simultaneously to improve reliability of an ion source considerably. The JINR EBIS `Krion-2' in the string mode of operation is used for production of N7+, Ar16+ and Fe24+ ion beams and their acceleration to relativistic energies on the facility of the JINR super conducting one turn injection synchrotron `Nuklotron'. The tubular electron string possibly can exist and it is under study now theoretically and experiments are prepared now. Estimations show that a Tubular Electron String Ion Source (TESIS) could have up to three orders of magnitude higher ion output then a Linear one (LESIS). In frames of nuclear astrophysics electron strings can be used for research of fusion nuclear reactions at low energies in conditions when both beam and target nuclei do not carry orbital electrons. The project NARITA — Nuclear Astrophysics Researches in an Ion Trap Apparatus is proposed. Polarization effects also can be studied.

  1. Electron string phenomenon: physics and use

    International Nuclear Information System (INIS)

    Donets, Evgeny D

    2004-01-01

    Electron string phenomenon arises as a result of phase transition of a state of multiply reflected electron beam to this new discovered state of one component electron plasma and can be easily observed in the reflex mode of EBIS operation. The transition goes via a strong instability, which causes considerable electron energy spread, which in its turn suppresses the instability. Electron string state is a stationary state of hot pure electron plasma, which is heated by injected electron beam and cooled because of electron loses. Electron string is quiet in broad regions of experimental parameters, so that it is used for confinement and ionization of positive ions by electron impact to highly charge states similar to electron beams in EBIS. Application of electron strings instead of electron beams for ion production allows to save about 99% of electric power of electron beam and simultaneously to improve reliability of an ion source considerably. The JINR EBIS 'Krion-2' in the string mode of operation is used for production of N 7+ , Ar 16+ and Fe 24+ ion beams and their acceleration to relativistic energies on the facility of the JINR super conducting one turn injection synchrotron 'Nuklotron'. The tubular electron string possibly can exist and it is under study now theoretically and experiments are prepared now. Estimations show that a Tubular Electron String Ion Source (TESIS) could have up to three orders of magnitude higher ion output then a Linear one (LESIS). In frames of nuclear astrophysics electron strings can be used for research of fusion nuclear reactions at low energies in conditions when both beam and target nuclei do not carry orbital electrons. The project NARITA - Nuclear Astrophysics Researches in an Ion Trap Apparatus is proposed. Polarization effects also can be studied

  2. Effects of Land Use/Cover Changes and Urban Forest Configuration on Urban Heat Islands in a Loess Hilly Region: Case Study Based on Yan’an City, China

    Directory of Open Access Journals (Sweden)

    Xinping Zhang

    2017-07-01

    Full Text Available In this study Yan’an City, a typical hilly valley city, was considered as the study area in order to explain the relationships between the surface urban heat island (SUHI and land use/land cover (LULC types, the landscape pattern metrics of LULC types and land surface temperature (LST and remote sensing indexes were retrieved from Landsat data during 1990–2015, and to find factors contributed to the green space cool island intensity (GSCI through field measurements of 34 green spaces. The results showed that during 1990–2015, because of local anthropogenic activities, SUHI was mainly located in lower vegetation cover areas. There was a significant suburban-urban gradient in the average LST, as well as its heterogeneity and fluctuations. Six landscape metrics comprising the fractal dimension index, percentage of landscape, aggregation index, division index, Shannon’s diversity index, and expansion intensity of the classified LST spatiotemporal changes were paralleled to LULC changes, especially for construction land, during the past 25 years. In the urban area, an index-based built-up index was the key positive factor for explaining LST increases, whereas the normalized difference vegetation index and modified normalized difference water index were crucial factors for explaining LST decreases during the study periods. In terms of the heat mitigation performance of green spaces, mixed forest was better than pure forest, and the urban forest configuration had positive effects on GSCI. The results of this study provide insights into the importance of species choice and the spatial design of green spaces for cooling the environment.

  3. Effects of Land Use/Cover Changes and Urban Forest Configuration on Urban Heat Islands in a Loess Hilly Region: Case Study Based on Yan’an City, China

    Science.gov (United States)

    Zhang, Xinping; Hao, Hongke; Zhang, Fangfang; Hu, Youning

    2017-01-01

    In this study Yan’an City, a typical hilly valley city, was considered as the study area in order to explain the relationships between the surface urban heat island (SUHI) and land use/land cover (LULC) types, the landscape pattern metrics of LULC types and land surface temperature (LST) and remote sensing indexes were retrieved from Landsat data during 1990–2015, and to find factors contributed to the green space cool island intensity (GSCI) through field measurements of 34 green spaces. The results showed that during 1990–2015, because of local anthropogenic activities, SUHI was mainly located in lower vegetation cover areas. There was a significant suburban-urban gradient in the average LST, as well as its heterogeneity and fluctuations. Six landscape metrics comprising the fractal dimension index, percentage of landscape, aggregation index, division index, Shannon’s diversity index, and expansion intensity of the classified LST spatiotemporal changes were paralleled to LULC changes, especially for construction land, during the past 25 years. In the urban area, an index-based built-up index was the key positive factor for explaining LST increases, whereas the normalized difference vegetation index and modified normalized difference water index were crucial factors for explaining LST decreases during the study periods. In terms of the heat mitigation performance of green spaces, mixed forest was better than pure forest, and the urban forest configuration had positive effects on GSCI. The results of this study provide insights into the importance of species choice and the spatial design of green spaces for cooling the environment. PMID:28933770

  4. Effects of Land Use/Cover Changes and Urban Forest Configuration on Urban Heat Islands in a Loess Hilly Region: Case Study Based on Yan'an City, China.

    Science.gov (United States)

    Zhang, Xinping; Wang, Dexiang; Hao, Hongke; Zhang, Fangfang; Hu, Youning

    2017-07-26

    In this study Yan'an City, a typical hilly valley city, was considered as the study area in order to explain the relationships between the surface urban heat island (SUHI) and land use/land cover (LULC) types, the landscape pattern metrics of LULC types and land surface temperature (LST) and remote sensing indexes were retrieved from Landsat data during 1990-2015, and to find factors contributed to the green space cool island intensity (GSCI) through field measurements of 34 green spaces. The results showed that during 1990-2015, because of local anthropogenic activities, SUHI was mainly located in lower vegetation cover areas. There was a significant suburban-urban gradient in the average LST, as well as its heterogeneity and fluctuations. Six landscape metrics comprising the fractal dimension index, percentage of landscape, aggregation index, division index, Shannon's diversity index, and expansion intensity of the classified LST spatiotemporal changes were paralleled to LULC changes, especially for construction land, during the past 25 years. In the urban area, an index-based built-up index was the key positive factor for explaining LST increases, whereas the normalized difference vegetation index and modified normalized difference water index were crucial factors for explaining LST decreases during the study periods. In terms of the heat mitigation performance of green spaces, mixed forest was better than pure forest, and the urban forest configuration had positive effects on GSCI. The results of this study provide insights into the importance of species choice and the spatial design of green spaces for cooling the environment.

  5. Oscillating heat pipes

    CERN Document Server

    Ma, Hongbin

    2015-01-01

    This book presents the fundamental fluid flow and heat transfer principles occurring in oscillating heat pipes and also provides updated developments and recent innovations in research and applications of heat pipes. Starting with fundamental presentation of heat pipes, the focus is on oscillating motions and its heat transfer enhancement in a two-phase heat transfer system. The book covers thermodynamic analysis, interfacial phenomenon, thin film evaporation,  theoretical models of oscillating motion and heat transfer of single phase and two-phase flows, primary  factors affecting oscillating motions and heat transfer,  neutron imaging study of oscillating motions in an oscillating heat pipes, and nanofluid’s effect on the heat transfer performance in oscillating heat pipes.  The importance of thermally-excited oscillating motion combined with phase change heat transfer to a wide variety of applications is emphasized. This book is an essential resource and learning tool for senior undergraduate, gradua...

  6. Kierkegaard and the Sheer Phenomenon of Love

    DEFF Research Database (Denmark)

    Søltoft, Pia

    2013-01-01

    In this article we will argue that Kierkegaard has a positive view of love as a sheer natural and universal phenomenon. This sheer phenomenon of love is rooted in God’s love and is implanted in human nature by its Creator. Therefore this natural urge to love, that manifests itself both as a lack...

  7. Terrorism as a Social and Legal Phenomenon

    Science.gov (United States)

    Serebrennikova, Anna; Mashkova, Yekaterina

    2017-01-01

    This article examines the concept of terrorism as a social and legal phenomenon, its international legal and criminal-legal characteristics. Highlighted are the main aspects of cooperation of the states and the international community to counter terrorist activities. Terrorism as a social phenomenon is determined by paragraph 1 of article 3 of the…

  8. MOBBING PHENOMENON - FACTORS OF DISCRIMINATION AND STRESS

    Directory of Open Access Journals (Sweden)

    ROMANESCU MARCEL LAURENTIU

    2017-02-01

    Full Text Available This article focuses on exemplifying the features of discrimination phenomenon in the workplace, a phenomenon that has appeared in the Romanian social studies only in the last 4 years. Mobbing phenomenon has been analyzed by several countries in Europe such as England, France, Germany; after these analyzes it has been found that this phenomenon refers only to actions of intense psychological pressure. Actions are geared to a single employee, in order to cause it to leave its job. Without these measures, dismissal of the employee would lead to numerous legal problems on the employer. In conclusion, employee who is the subject of mobbing phenomenon must endure a long period of time a series of injustices focused on himself, but also extremely high humiliation, which determines him to mentally give up and take the decision to resign.

  9. Study on the Temperature Separation Phenomenon in a Vortex Chamber

    Energy Technology Data Exchange (ETDEWEB)

    Ye, A Ran; Guang, Zhang; Kim, Heuy Dong [Andong National University, Andong (Korea, Republic of)

    2014-09-15

    A vortex chamber is a simple device that separates compressed gas into a high-temperature stream and a low-temperature stream. It is increasing in popularity as a next-generation heat exchanger, but the flow physics associated with it is not yet well understood. In the present study, both experimental and numerical analyses were performed to investigate the temperature separation phenomenon inside the vortex chamber. Static pressures and temperatures were measured using high-sensitivity pressure transducers and thermocouples, respectively. Computational fluid dynamics was applied to simulate 3D unsteady compressible flows. The simulation results showed that the temperature separation is strongly dependent on the diameter of the vortex chamber and the supply pressure at the inlet ports, where the latter is closely related to the viscous work. The previous concept of a pressure gradient wave may not be a reasoning for temperature separation phenomenon inside the vortex chamber.

  10. Surface Heat Balance Analysis of Tainan City on March 6, 2001 Using ASTER and Formosat-2 Data

    Directory of Open Access Journals (Sweden)

    Chen-Yi Sun

    2008-09-01

    Full Text Available The urban heat island phenomenon occurs as a mixed result of anthropogenic heat discharge, decreased vegetation, and increased artificial impervious surfaces. To clarify the contribution of each factor to the urban heat island, it is necessary to evaluate the surface heat balance. Satellite remote sensing data of Tainan City, Taiwan, obtained from Terra ASTER and Formosat-2 were used to estimate surface heat balance in this study. ASTER data is suitable for analyzing heat balance because of the wide spectral range. We used Formosat-2 multispectral data to classify the land surface, which was used to interpolate some surface parameters for estimating heat fluxes. Because of the high spatial resolution of the Formosat-2 image, more roads, open spaces and small vegetation areas could be distinguished from buildings in urban areas; however, misclassifications of land cover in such areas using ASTER data would overestimate the sensible heat flux. On the other hand, the small vegetated areas detected from the Formosat-2 image slightly increased the estimation of latent heat flux. As a result, the storage heat flux derived from Formosat-2 is higher than that derived from ASTER data in most areas. From these results, we can conclude that the higher resolution land coverage map increases accuracy of the heat balance analysis. Storage heat flux occupies about 60 to 80% of the net radiation in most of the artificial surface areas in spite of their usages. Because of the homogeneity of the building roof materials, there is no contrast between the storage heat flux in business and residential areas. In sparsely vegetated urban areas, more heat is stored and latent heat is smaller than that in the forested suburbs. This result implies that density of vegetation has a significant influence in decreasing temperatures.

  11. Atomistic understanding of hydrogen loading phenomenon into ...

    Indian Academy of Sciences (India)

    IASBS), ... ically through various electrochemical methods and high-level quantum ... ton) by applying a constant anodic voltage. .... phenomenon being occurred at metal | solution inter- .... cationic form and extra energy is released by occupying.

  12. Koebner phenomenon of the ear canal skin.

    LENUS (Irish Health Repository)

    Young, O

    2012-02-01

    The Koebner phenomenon originally described the appearance of psoriatic lesions in the uninvolved skin of patients with psoriasis as a consequence of trauma. We describe a case of concurrent lichen planus and sarcoidosis in the auditory canal, which represents an unusual manifestation of the Koebner phenomenon. This is the first case of concurrent lichen planus and sarcoidosis in the head and neck region and highlights the need for biopsy to allow accurate histopathological diagnosis and treatment.

  13. Koebner phenomenon of the ear canal skin.

    LENUS (Irish Health Repository)

    Young, O

    2009-02-01

    The Koebner phenomenon originally described the appearance of psoriatic lesions in the uninvolved skin of patients with psoriasis as a consequence of trauma. We describe a case of concurrent lichen planus and sarcoidosis in the auditory canal, which represents an unusual manifestation of the Koebner phenomenon. This is the first case of concurrent lichen planus and sarcoidosis in the head and neck region and highlights the need for biopsy to allow accurate histopathological diagnosis and treatment.

  14. Job Insecurity as a Social Psychological Phenomenon

    Directory of Open Access Journals (Sweden)

    Chuykova T.S.

    2015-12-01

    Full Text Available The paper addresses a relatively new phenomenon of job insecurity. It provides an analysis of the various interpretations of the phenomenon given by Russian and foreign researchers, focuses on its social economical determinants and consequences for individuals and organizations. The paper concludes with an outline of some possible ways of overcoming the negative consequences of job insecurity — as for individuals, as for organizations, as for the society as a whole.

  15. Open source innovation phenomenon, participant behaviour, impact

    CERN Document Server

    Herstatt, Cornelius

    2015-01-01

    Open Source Innovation (OSI) has gained considerable momentum within the last years. Academic and management practice interest grows as more and more end-users consider and even participate in Open Source product development like Linux, Android, or Wikipedia. Open Source Innovation: Phenomenon, Participant Behaviour, Impact brings together rigorous academic research and business importance in scrutinizing OCI from three perspectives: The Phenomenon, Participants' Behavior, and Business Implications. The first section introduces OCI artefacts, including who is participating and why, and provide

  16. Spatial temporal analysis of urban heat hazard in Tangerang City

    Science.gov (United States)

    Wibowo, Adi; Kuswantoro; Ardiansyah; Rustanto, Andry; Putut Ash Shidiq, Iqbal

    2016-11-01

    Urban heat is a natural phenomenon which might caused by human activities. The human activities were represented by various types of land-use such as urban and non-urban area. The aim of this study is to identify the urban heat behavior in Tangerang City as it might threats the urban environment. This study used three types of remote sensing data namely, Landsat TM, Landsat ETM+ and Landsat OLI-TIRS, to capture the urban heat behavior and to analysis the urban heat signature of Tangerang City in 2001, 2012, 2013, 2014, 2015 and 2016. The result showed that urban heat signature change dynamically each month based on the sun radiation. The urban heat island covered only small part of Tangerang City in 2001, but it was significantly increased and reached 50% of the area in 2012. Based on the result on urban heat signature, the threshold for threatening condition is 30 oC which recognized from land surface temperature (LST). The effective temperature (ET) index explains that condition as warm, uncomfortable, increase stress due to sweating and blood flow and may causing cardiovascular disorder.

  17. Validation of the Impostor Phenomenon among Managers.

    Science.gov (United States)

    Rohrmann, Sonja; Bechtoldt, Myriam N; Leonhardt, Mona

    2016-01-01

    Following up on earlier investigations, the present research aims at validating the construct impostor phenomenon by taking other personality correlates into account and to examine whether the impostor phenomenon is a construct in its own right. In addition, gender effects as well as associations with dispositional working styles and strain are examined. In an online study we surveyed a sample of N = 242 individuals occupying leadership positions in different sectors. Confirmatory factor analyses provide empirical evidence for the discriminant validity of the impostor phenomenon. In accord with earlier studies we show that the impostor phenomenon is accompanied by higher levels of anxiety, dysphoric moods, emotional instability, a generally negative self-evaluation, and perfectionism. The study does not reveal any gender differences concerning the impostor phenomenon. With respect to working styles, persons with an impostor self-concept tend to show perfectionist as well as procrastinating behaviors. Moreover, they report being more stressed and strained by their work. In sum, the findings show that the impostor phenomenon constitutes a dysfunctional personality style. Practical implications are discussed.

  18. Class renormalization: islands around islands

    International Nuclear Information System (INIS)

    Meiss, J.D.

    1986-01-01

    An orbit of 'class' is one that rotates about a periodic orbit of one lower class with definite frequency. This contrasts to the 'level' of a periodic orbit which is the number of elements in its continued fraction expansion. Level renormalization is conventionally used to study the structure of quasi-periodic orbits. The scaling structure of periodic orbits encircling other periodic orbits in area preserving maps is discussed here. Fixed points corresponding to the accumulation of p/q bifurcations are found and scaling exponents determined. Fixed points for q > 2 correspond to self-similar islands around islands. Frequencies of the island boundary circles at the fixed points are obtained. Importance of this scaling for the motion of particles in stochastic regions is emphasized. (author)

  19. The emerging magnetic flux and the elementary eruptive phenomenon

    International Nuclear Information System (INIS)

    Mouradian, Z.; Martres, M.J.; Soru-Escaut, I.

    1983-01-01

    Observational studies before and during the flare start were made in Hα(3-lambda heliograph at Meudon Observatory) on a large sample of ''elementary'' flares, both on the disk and along the limb of the Sun. The concept of elementary eruptive phenomenon (EEP) is proposed to describe these observational data. The EEP may be considered as the basic element of complex flares which, then, are built up by the juxtaposition of several EEP. In the inferred scenario, the chromospheric eruptive phenomenon consists of two systems of loops: one cold - the surging arch - Tapprox.=10 4 K, the other hot - the flaring arch -, covering a temperature range up to 10 7 K. The footpoints of the two systems remain differentiated until extinction of the phenomenon; their behaviour over time differs also. The surging arch (the magnetic flux emergence) rises first progressively in the solar atmosphere and the upper part of the loop is heated to coronal temperatures. The classical surge which is observed in the center of the Hα line, after the flash phase of the flare, is only the late development of the surging arch. The flaring arch originates from a pre-existing low loop, which is also to rise in the solar atmosphere. These two systems coexist and may combine to form such physical characteristics as mass motion, expansion and post-flash phase. (orig.)

  20. [The knowledge of animal respiration as a combustion phenomenon].

    Science.gov (United States)

    de Micheli, Alfredo

    2014-01-01

    The different stages leading to knowledge of the phenomenon of animal breathing are going from some writings in Corpus Hippocraticum to Aristoteles' and Galen's works, who considered the heart as the source of the animal heat. Later, Miguel Servet suggested that the inspired air can achieve other functions besides cooling the blood. After that, different explications of the animal heat were raised. About 1770, due to progress of knowledge in the chemistry field, first Mayow and later Black began to consider the animal respiration as a combustion. The important treatise Méthode de nomenclature chimique, published by Guyton de Morveau et al. in 1787 and soon after the Traité élémentaire de chimie de Lavoisier (1789) provided a solid support to Lavoisier's thought. This way on arrived to consider analogous the respiration and combustion phenomena. Studies on the animal respiration phenomenon continued in xix century and in the following century it was possible to apply thermodynamic principles to biology: "generalized thermodynamics". Copyright © 2013 Instituto Nacional de Cardiología Ignacio Chávez. Published by Masson Doyma México S.A. All rights reserved.

  1. Assessment of urban heat islands and impact of climate change on socioeconomic over Suez Governorate using remote sensing and GIS techniques

    Directory of Open Access Journals (Sweden)

    S. Ahmed

    2018-04-01

    Full Text Available Climate change and its effect on human life and comfort have taken increase attraction. In this paper effect of UHI is analyzed using quantitative thermal, temporal remote sensing and GIS techniques. Series of Landsat TM/ETM, 8 and ASTER images of Suez Governorate acquired in winter season were used to investigate the variation in land surface temperature (LST from 1988 to 2014 as well as land-use/cover change. NDVI NDBI and LST have been used for classification of the study area. Vulnerable areas for UHI have been assessed over Suez district. The effect of UHI was quantitatively described using urban thermal field variance index (UTFVI. Results indicate that there are increases in the overall temperature between years 1988 and 2014. Suez and Al-Arbin districts which are the most populated, highly density built-up and rarely vegetation zones in Suez governorate experiences a huge problem of UHI. UHI phenomenon represents total weight of 40.84% and 46.3% of their areas respectively. It is found that the mean temperature of UHI areas of Al-Arbin and Al-Suez districts was 7.5 above mean of District temperature. While the value of UHI of suburban zone e.g. Ataqa and AL-Ganayin was 2.5 degree above district mean. The results indicate that changes in UTFVI distribution can be predominantly related to the expansion of urban area during the study time period. The hot spot of UTFVI were found mainly in the built-up areas especially densely populated district and in heavily industrial district. It is the vulnerable areas to UHI. Keywords: Climate change, UHI, Suez Canal, Suez Governorate, Land surface temperature, Land/use land/cover change, Urban sprawl

  2. Deepest Depth of Seismogenic Layer Within the Crust Beneath Japanese Islands on the Japan Sea Side Using High Resolved Earthquake Catalog and Heat Flux Data

    Science.gov (United States)

    Matsubara, M.; Yano, T. E.

    2017-12-01

    Understanding the deepest depth of seismogenic layer is important parameter for the earthquake hazard assessment because this relates to the size of earthquakes caused by the active fault. Using the indexes D90 and D95, defined as the depth above which 90% and 95 % of the whole crustal earthquakes occurred from the surface, as the lower limits of the seismogenic layer. We verified the seismogenic depth for particular earthquakes on the Japan Sea side occurred after the year of 2001. We compared with the actual main shock hypocenter depth, their aftershocks, main slip region on the fault, and depth where the temperature estimated to be 250, 300, and 450 degrees. For D90 and D95, we used two different earthquake catalogs. First, the catalog in which we relocated hypocenters for 12 years between 2001 and 2012 from the NIED Hi-net catalog (JUICE catalog, Yano et al. 2017) for high resolution hypocenter locations (Depth 0.0). This catalog is used to get D95 values. Second, the earthquake catalog redetermined with the 3D velocity structure (Matsubara and Obara, 2011) particularly for getting the D90 value around the costal region. In order to satisfy Gutenberg-Richter magnitude-frequency relation, we chose events M>1.5. We then calculated the D90 and D95 using the same method as Matsubara and Sato (2015). For depths where the temperatures are 250, 300, and 450 degrees are estimated from heat flux measured at Hi-net boreholes (Matsumoto, 2007) and other additional data Sakagawa et al. (2005). Depths are calculated using the steady-state, one-dimensional, heat conduction equation with an exponential decrease in the radioactivity heat generation introduced in Tanaka (2004). The general pattern of our results is consistent with previous studies of D90 as very deep D95 beneath the northern Hokkaido and northern Honshu and very shallow D95 along the volcanic front. We found that our D90/D95 showed the deepest boundary of hypocenter of mainshock, majority of aftershocks, main

  3. Historical Aspects in Tolerance Phenomenon Research

    Directory of Open Access Journals (Sweden)

    Janat A. Karmanova

    2013-01-01

    Full Text Available The article examines the historical aspect of the tolerance phenomenon research, particularly the study of tolerance in the age of Antiquity, Middle Ages, New Times, Enlightenment. It is remarkable that the problem of tolerance, emerged in Western civilization on religious grounds, laid the foundation for all other freedoms, attained in many countries. Besides, the article attaches special attention to the researchers of the East, such as Abu Nasr al-Farabi, Khoja Ahmed Yasawi, studies the historical aspect of works by Kazakhstan thinkers A. Kunanbayev, C. Valikhanova, K.B. Zharikbayev, S.K. Kaliyev, A.N. Nysanbayev, A.I. Artemev and others. The analysis of historical research of the tolerance phenomenon brings the author to the conclusion that religious freedom was the starting point for the emergence of new areas of tolerance display. The content of this phenomenon changed according to the historical peculiarities of the societies’ development

  4. Hysteresis phenomenon in nuclear reactor dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Pirayesh, Behnam; Pazirandeh, Ali [Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Dept. of Nuclear Engineering, Science and Research Branch; Akbari, Monireh [Shahid Rajaee Teacher Training Univ., Tehran (Iran, Islamic Republic of). Dept. of Mathematics

    2017-05-15

    This paper applies a nonlinear analysis method to show that hysteresis phenomenon, due to the Saddle-node bifurcation, may occur in the nuclear reactor. This phenomenon may have significant effects on nuclear reactor dynamics and can even be the beginning of a nuclear reactor accident. A system of four dimensional nonlinear ordinary differential equations was considered to study the hysteresis phenomenon in a typical nuclear reactor. It should be noted that the reactivity was considered as a nonlinear function of state variables. The condition for emerging hysteresis was investigated using Routh-Hurwitz criterion and Sotomayor's theorem for saddle node bifurcation. A numerical analysis is also provided to illustrate the analytical results.

  5. Social Media: A Phenomenon to be Analyzed

    Directory of Open Access Journals (Sweden)

    danah boyd

    2015-04-01

    Full Text Available The phenomenon of “social media” has more to do with its cultural positioning than its technological affordances. Rooted in the broader “Web 2.0” landscape, social media helped engineers, entrepreneurs, and everyday people reimagine the role that technology could play in information dissemination, community development, and communication. While the technologies invoked by the phrase social media have a long history, what unfolded in the 2000s reconfigured socio-technical practices in significant ways. Reflecting on the brief history of social media, this essay argues for the need to better understand this phenomenon.

  6. Fuelwood production in Prince Edward Island

    International Nuclear Information System (INIS)

    McCallum, B.

    1992-01-01

    The most recent Prince Edward Island Fuelwood Survey occurred in 1990-91. Consumption of fuelwood rose again to 49% of Prince Edward Island's 43,170 households. Total residential fuelwood consumption was estimated to be 242,000 m 3 . The fuelwood industry makes an important contribution to the economy of Prince Edward Island. In the 1990-91 heating season, fuelwood valued at USD 9 million displaced approximately 43 million litres of domestic heating oil valued at USD 16.4 million. In addition, it is estimated that 70 cents of every dollar spent on fuelwood remains in the province and contributes spin-off benefits, whereas 90 cents of every dollar spent on heating oil is lost to the economy of Prince Edward Island. The percentage of people cutting their own fuelwood decreased from 52 in 1984-85 to only 23.4 in 1990-91. The governments of Canada and Prince Edward Island have implemented a series of Forest Resource Development Agreements (FRDAs) starting in 1983. The current 1988-1993 FRDA provides USD 24 million for research and incentives for reforestation and management of Prince Edward Island woodlots. It is expected that 3,800 Prince Edward Island woodlot owners will be participating in a woodlot management program by 1993. Silviculture treatments of hardwood stands include thinning, stand conversion (removal of lowgrade softwoods such as balsam fir in mainly hardwood stands), and shelterwood (strip) cutting, particularly in marginal stands. (9 refs.)

  7. Development and application of artificial neural network models to estimate values of a complex human thermal comfort index associated with urban heat and cool island patterns using air temperature data from a standard meteorological station.

    Science.gov (United States)

    Moustris, Konstantinos; Tsiros, Ioannis X; Tseliou, Areti; Nastos, Panagiotis

    2018-04-11

    The present study deals with the development and application of artificial neural network models (ANNs) to estimate the values of a complex human thermal comfort-discomfort index associated with urban heat and cool island conditions inside various urban clusters using as only inputs air temperature data from a standard meteorological station. The index used in the study is the Physiologically Equivalent Temperature (PET) index which requires as inputs, among others, air temperature, relative humidity, wind speed, and radiation (short- and long-wave components). For the estimation of PET hourly values, ANN models were developed, appropriately trained, and tested. Model results are compared to values calculated by the PET index based on field monitoring data for various urban clusters (street, square, park, courtyard, and gallery) in the city of Athens (Greece) during an extreme hot weather summer period. For the evaluation of the predictive ability of the developed ANN models, several statistical evaluation indices were applied: the mean bias error, the root mean square error, the index of agreement, the coefficient of determination, the true predictive rate, the false alarm rate, and the Success Index. According to the results, it seems that ANNs present a remarkable ability to estimate hourly PET values within various urban clusters using only hourly values of air temperature. This is very important in cases where the human thermal comfort-discomfort conditions have to be analyzed and the only available parameter is air temperature.

  8. Development and application of artificial neural network models to estimate values of a complex human thermal comfort index associated with urban heat and cool island patterns using air temperature data from a standard meteorological station

    Science.gov (United States)

    Moustris, Konstantinos; Tsiros, Ioannis X.; Tseliou, Areti; Nastos, Panagiotis

    2018-04-01

    The present study deals with the development and application of artificial neural network models (ANNs) to estimate the values of a complex human thermal comfort-discomfort index associated with urban heat and cool island conditions inside various urban clusters using as only inputs air temperature data from a standard meteorological station. The index used in the study is the Physiologically Equivalent Temperature (PET) index which requires as inputs, among others, air temperature, relative humidity, wind speed, and radiation (short- and long-wave components). For the estimation of PET hourly values, ANN models were developed, appropriately trained, and tested. Model results are compared to values calculated by the PET index based on field monitoring data for various urban clusters (street, square, park, courtyard, and gallery) in the city of Athens (Greece) during an extreme hot weather summer period. For the evaluation of the predictive ability of the developed ANN models, several statistical evaluation indices were applied: the mean bias error, the root mean square error, the index of agreement, the coefficient of determination, the true predictive rate, the false alarm rate, and the Success Index. According to the results, it seems that ANNs present a remarkable ability to estimate hourly PET values within various urban clusters using only hourly values of air temperature. This is very important in cases where the human thermal comfort-discomfort conditions have to be analyzed and the only available parameter is air temperature.

  9. Mesoscale Phenomenon Revealed by an Acoustic Sounder

    DEFF Research Database (Denmark)

    Lundtang Petersen, Erik; Jensen, Niels Otto

    1976-01-01

    A particular phenomenon observed on an acoustic sounder record is analyzed, and is interpreted as being associated with the passing of a land breeze front. A simple physical explanation of the frontal movements is suggested. The actual existence of the land breeze is demonstrated by examination...

  10. Methods to Minimize Zero-Missing Phenomenon

    DEFF Research Database (Denmark)

    da Silva, Filipe Miguel Faria; Bak, Claus Leth; Gudmundsdottir, Unnur Stella

    2010-01-01

    With the increasing use of high-voltage AC cables at transmission levels, phenomena such as current zero-missing start to appear more often in transmission systems. Zero-missing phenomenon can occur when energizing cable lines with shunt reactors. This may considerably delay the opening of the ci...

  11. Key-Phenomenon and Religious Meaning

    Directory of Open Access Journals (Sweden)

    Lomuscio Vincenzo

    2017-09-01

    Full Text Available In this paper I develop a phenomenology of religious experience through the notion of keyphenomenon. My analysis moves from a general phenomenology of situation, in which we have to relate different phenomena according to a sense. What does “according to a sense” mean? My suggestion is that we should look for a relationship among these data when we find a key-phenomenon (among a series of phenomena that would enlighten all the others. This key-phenomenon would show a non-phenomenal meaning which would make all the others understandable. Each other datum, therefore, becomes the witness of invisible meaning through a key-witness. The key-phenomenon we choose determines the role (i.e., the truth of each datum within its situation. This phenomenological relationship belongs to both the sense of day-life situations, and that one of possible religious situations. If the religious interpretation of a situation depends on our choice of key-phenomenon, or key-witness, we have to define what kind of keyphenomenon constitutes a religious intuition.

  12. Concept "Medical Museum" as a Sociocultural Phenomenon

    Science.gov (United States)

    Chizh, Nina V.; Slyshkin, Gennady G.; Zheltukhina, Marina R.; Privalova, Irina V.; Kravchenko, Olga A.

    2016-01-01

    The article examines the concept "medical museum" as a sociocultural phenomenon. The register of medical museums in Russia makes the material of research. The complex methods of analysis of the concept "medical museum" are used. The philosophical, historical, cultural, structural, communicative and semantic analysis is carried…

  13. Geometrical optics and the diffraction phenomenon

    International Nuclear Information System (INIS)

    Timofeev, Aleksandr V

    2005-01-01

    This note outlines the principles of the geometrical optics of inhomogeneous waves whose description necessitates the use of complex values of the wave vector. Generalizing geometrical optics to inhomogeneous waves permits including in its scope the analysis of the diffraction phenomenon. (methodological notes)

  14. Laser Sintering Technology and Balling Phenomenon.

    Science.gov (United States)

    Oyar, Perihan

    2018-02-01

    The aim of this review was to evaluate the balling phenomenon which occurs typically in Selective Laser Sintering (SLS). The balling phenomenon is a typical SLS defect, and observed in laser sintered powder, significantly reduces the quality of SLS, and hinders the further development of SLS Technology. Electronic database searches were performed using Google Scholar. The keywords "laser sintering, selective laser sintering, direct metal laser melting, and balling phenomenon" were searched in title/abstract of publications, limited to December 31, 2016. The inclusion criteria were SLS, balling phenomenon, some alloys (such as Cr-Co, iron, stainless steel, and Cu-based alloys) mechanical properties, microstructure and bond strength between metal-ceramic crown, laboratory studies, full text, and in English language. A total of 100 articles were found the initial search and yielded a total of 50 studies, 30 of which did not fulfill the inclusion criteria and were therefore excluded. In addition, 20 studies were found by screening the reference list of all included publications. Finally, 40 studies were selected for this review. The method in question is regulated by powder material characteristics and the conditions of laser processing. The procedure of formation, affecting factors, and the mechanism of the balling effect are very complex.

  15. Orgasm Induced Seizures: A Rare Phenomenon

    African Journals Online (AJOL)

    testing of the brain revealed no structural abnormality. His blood examination findings were ... A variety of stimuli can cause reflex seizures, Some triggers include light, music and cognitive phenomenon. There are case reports ... seizures cause great personal distress and significantly affect marital relationships. Though ...

  16. Assessing Vulnerability to Urban Heat: A Study of Disproportionate Heat Exposure and Access to Refuge by Socio-Demographic Status in Portland, Oregon

    Directory of Open Access Journals (Sweden)

    Jackson Voelkel

    2018-03-01

    Full Text Available Extreme urban heat is a powerful environmental stressor which poses a significant threat to human health and well-being. Exacerbated by the urban heat island phenomenon, heat events are expected to become more intense and frequent as climate change progresses, though we have limited understanding of the impact of such events on vulnerable populations at a neighborhood or census block group level. Focusing on the City of Portland, Oregon, this study aimed to determine which socio-demographic populations experience disproportionate exposure to extreme heat, as well as the level of access to refuge in the form of public cooling centers or residential central air conditioning. During a 2014 heat wave, temperature data were recorded using a vehicle-traverse collection method, then extrapolated to determine average temperature at the census block group level. Socio-demographic factors including income, race, education, age, and English speaking ability were tested using statistical assessments to identify significant relationships with heat exposure and access to refuge from extreme heat. Results indicate that groups with limited adaptive capacity, including those in poverty and non-white populations, are at higher risk for heat exposure, suggesting an emerging concern of environmental justice as it relates to climate change. The paper concludes by emphasizing the importance of cultural sensitivity and inclusion, in combination with effectively distributing cooling centers in areas where the greatest burden befalls vulnerable populations.

  17. Assessing Vulnerability to Urban Heat: A Study of Disproportionate Heat Exposure and Access to Refuge by Socio-Demographic Status in Portland, Oregon.

    Science.gov (United States)

    Voelkel, Jackson; Hellman, Dana; Sakuma, Ryu; Shandas, Vivek

    2018-03-30

    Extreme urban heat is a powerful environmental stressor which poses a significant threat to human health and well-being. Exacerbated by the urban heat island phenomenon, heat events are expected to become more intense and frequent as climate change progresses, though we have limited understanding of the impact of such events on vulnerable populations at a neighborhood or census block group level. Focusing on the City of Portland, Oregon, this study aimed to determine which socio-demographic populations experience disproportionate exposure to extreme heat, as well as the level of access to refuge in the form of public cooling centers or residential central air conditioning. During a 2014 heat wave, temperature data were recorded using a vehicle-traverse collection method, then extrapolated to determine average temperature at the census block group level. Socio-demographic factors including income, race, education, age, and English speaking ability were tested using statistical assessments to identify significant relationships with heat exposure and access to refuge from extreme heat. Results indicate that groups with limited adaptive capacity, including those in poverty and non-white populations, are at higher risk for heat exposure, suggesting an emerging concern of environmental justice as it relates to climate change. The paper concludes by emphasizing the importance of cultural sensitivity and inclusion, in combination with effectively distributing cooling centers in areas where the greatest burden befalls vulnerable populations.

  18. Greater Baltimore Open Air: an Internet of Things (IoT) approach to citizen science and community-driven climate, air quality, and urban heat island monitoring

    Science.gov (United States)

    Scott, A.; Kelley, C.; Azdoud, Y.; Ambikapathi, R.; Hobson, M.; Lehman, A.; Ghugare, P.; He, C.; Zaitchik, B. F.; Waugh, D.; McCormack, M.; Baja, K.

    2017-12-01

    Anthropogenic activities alter the urban surface and surface atmosphere, generating heat and pollutants that have known detrimental impacts on health. Monitoring these environmental variables in urban environments is made difficult by the spatial heterogeneity of urban environments, meaning that two nearby locations may have significantly different temperatures, humidities, or gas concentrations. Thus, urban monitoring often requires more densely placed monitors than current standards or budgets allow. Recent advances in low-cost sensors and Internet of Things (IoT) enabled hardware offer possible solutions. We present an autonomous wireless, open-source, IoT-enabled environmental monitor called a WeatherCube, developed for the Greater Baltimore Open Air project, funded in part by the EPA SmartCity Challenge. The WeatherCube is suitable for urban monitoring and capable of measuring meteorological variables (temperature and humidity) as well as air quality (ozone, nitrogen dioxide, and sulfur dioxide). The WeatherCube devices were built in collaboration with Johns Hopkins University, local government, and community members, including through an innovative job training program. Monitors are hosted by community partners and libraries throughout Baltimore city and surrounding communities. We present the first wave of data collected by the Greater Baltimore Open Air project and compare it to data collected by the Maryland Department of the Environment (MDE). Additionally, we will provide an overview of our experience engaging with the local makers, citizen scientists, and environmental groups to improve their urban environmental monitoring. By developing low-cost devices tailored for urban environmental monitoring, we present an innovative model for both conducting research and community outreach.

  19. Phase transition phenomenon: A compound measure analysis

    Science.gov (United States)

    Kang, Bo Soo; Park, Chanhi; Ryu, Doojin; Song, Wonho

    2015-06-01

    This study investigates the well-documented phenomenon of phase transition in financial markets using combined information from both return and volume changes within short time intervals. We suggest a new measure for the phase transition behaviour of markets, calculated as a return distribution conditional on local variance in volume imbalance, and show that this measure successfully captures phase transition behaviour under various conditions. We analyse the intraday trade and quote dataset from the KOSPI 200 index futures, which includes detailed information on the original order size and the type of each initiating investor. We find that among these two competing factors, the submitted order size yields more explanatory power on the phenomenon of market phase transition than the investor type.

  20. The veining phenomenon in unalloyed plutonium

    International Nuclear Information System (INIS)

    White, J.S.

    1976-01-01

    An investigation has been made of the veining phenomenon in unalloyed plutonium. The surface markings, or veins, which are sometimes seen on α-phase plutonium samples, arise as a result of the β→α transformation. As far as is known, this veining is unrivalled in its scale and form as compared with the solid state surface transformation effects shown by any other metal. The phenomenon has been explained by the application of the Le Chatelier principle to the phase change. In this instance, the large (10%) volume contraction associated with the β→α reaction and the anisotropy of the nonoclinic α-phase structure, account for the fact that the veins are so prominent in plutonium. On the basis of the proposed model, the veins can only form at temperatures where the transformation mechanism is non-martensitic. (Auth.)

  1. Phenomenon of displacement in Arabic language

    Directory of Open Access Journals (Sweden)

    2015-09-01

    Full Text Available Displacement is one of the characteristics of language and common phenomena in the Arabic language. Not only is this phenomenon limited to Arabic poetry and prose, but it is also broadened, so we can see examples of this in the Qur'an. Because of this phenomenon extensively in Arabic literature and also because of its essence that leads to the transmission of the elements for the first visibility to the other visibility in the sentence and sometimes had to change the grammatical role of the words, its identify helps us in a better understanding of text and the correct translation of it and protects the reader from mistakes. This paper in the descriptive analytical approach tries studying of the phenomenon of the displacement in the Arabic language and bringing its instances in Arabic poetry and prose as well as verses contained in the Holy Quran, to show that through the types and characteristics in the Arabic language and to response to several questions, including: how important is the displacement and what is its types in rhetoric, and the reasons of the displacement, and etc... Of the most important results of this study may refer to the undeniable role of the displacement as a rhetorical method to better understanding of the texts including: one of the most important reasons of the displacement in the use of language is to improve speech verbally and morally, and violation of the standard language and create a poetic atmosphere, and the recognition of the occurrence of the phenomenon of displacement in the Arabic language that uphold different interpretations remote and estimates when faced with the displacement in the text and help us to understand it and etc...

  2. Multiplayer computer games as youth's leisure phenomenon

    OpenAIRE

    HADERKOVÁ, Barbora

    2016-01-01

    The thesis is dedicated to multiplayer computer games as youth's leisure phenomenon of this time. The theoretical part is focused on computer games history, multiplayer computer games and their types, gaming platforms, community of multiplayer games players and potential negatives and positives, which follows from playing this type of games. The practical part contains a qualitative survey using interviews with multiplayer computer games players aged from 15 to 26 years from city of České Bud...

  3. THE PHENOMENON OF MIGRATION. OPPORTUNITIES AND CHALLENGES

    Directory of Open Access Journals (Sweden)

    Carmen BOGHEAN

    2016-07-01

    Full Text Available Migration is not a new phenomenon, neither for Europe, nor for the entire world and it exists since the beginning of mankind. Over time, this kind of international mobility generated many opportunities, but many challenges as well. Being an extremely important and complex phenomenon, both in economic terms and mostly from the social perspective, mass emigration has never been more intense as nowadays. Together with this particular complexity, the intensity of the migration phenomenon reveals each individual’s profound freedom desire, but also the acute need to ensure a better future for himself and especially for his family. Currently, an ever increasing number of individuals migrate in search of a better place, changing regions, countries or even continents. Witnessing the events that transcend the people all around the world, we consider that migration generates economic, social and cultural, but also political profound changes. These major changes require the involvement of the political actors, namely the governments, in creating a favorable and reliable framework so as the society and decision makers to understand that immigrants represent an opportunity for the emerging economies and not a phenomenon that should be criticized. In this paper we aim to follow the theories regarding the migration process, as well as the changes it generates, taking into consideration that of the 507 million current inhabitants of the EU, approximately 20 million are from countries outside the EU. We consider this research to be underlain, taking into consideration that regardless of the form it takes, in Europe immigration is and will remain a difficult to manage reality.

  4. Development, Testing, and Application of a Coupled Hydrodynamic Surface-Water/Groundwater Model (FTLOADDS) with Heat and Salinity Transport in the Ten Thousand Islands/Picayune Strand Restoration Project Area, Florida

    Science.gov (United States)

    Swain, Eric D.; Decker, Jeremy D.

    2009-01-01

    A numerical model application was developed for the coastal area inland of the Ten Thousand Islands (TTI) in southwestern Florida using the Flow and Transport in a Linked Overland/Aquifer Density-Dependent System (FTLOADDS) model. This model couples a two-dimensional dynamic surface-water model with a three-dimensional groundwater model, and has been applied to several locations in southern Florida. The model application solves equations for salt transport in groundwater and surface water, and also simulates surface-water temperature using a newly enhanced heat transport algorithm. One of the purposes of the TTI application is to simulate hydrologic factors that relate to habitat suitability for the West Indian Manatee. Both salinity and temperature have been shown to be important factors for manatee survival. The inland area of the TTI domain is the location of the Picayune Strand Restoration Project, which is designed to restore predevelopment hydrology through the filling and plugging of canals, construction of spreader channels, and the construction of levees and pump stations. The effects of these changes are simulated to determine their effects on manatee habitat. The TTI application utilizes a large amount of input data for both surface-water and groundwater flow simulations. These data include topography, frictional resistance, atmospheric data including rainfall and air temperature, aquifer properties, and boundary conditions for tidal levels, inflows, groundwater heads, and salinities. Calibration was achieved by adjusting the parameters having the largest uncertainty: surface-water inflows, the surface-water transport dispersion coefficient, and evapotranspiration. A sensitivity analysis did not indicate that further parameter changes would yield an overall improvement in simulation results. The agreement between field data from GPS-tracked manatees and TTI application results demonstrates that the model can predict the salinity and temperature

  5. The Hurst Phenomenon in Error Estimates Related to Atmospheric Turbulence

    Science.gov (United States)

    Dias, Nelson Luís; Crivellaro, Bianca Luhm; Chamecki, Marcelo

    2018-05-01

    The Hurst phenomenon is a well-known feature of long-range persistence first observed in hydrological and geophysical time series by E. Hurst in the 1950s. It has also been found in several cases in turbulence time series measured in the wind tunnel, the atmosphere, and in rivers. Here, we conduct a systematic investigation of the value of the Hurst coefficient H in atmospheric surface-layer data, and its impact on the estimation of random errors. We show that usually H > 0.5 , which implies the non-existence (in the statistical sense) of the integral time scale. Since the integral time scale is present in the Lumley-Panofsky equation for the estimation of random errors, this has important practical consequences. We estimated H in two principal ways: (1) with an extension of the recently proposed filtering method to estimate the random error (H_p ), and (2) with the classical rescaled range introduced by Hurst (H_R ). Other estimators were tried but were found less able to capture the statistical behaviour of the large scales of turbulence. Using data from three micrometeorological campaigns we found that both first- and second-order turbulence statistics display the Hurst phenomenon. Usually, H_R is larger than H_p for the same dataset, raising the question that one, or even both, of these estimators, may be biased. For the relative error, we found that the errors estimated with the approach adopted by us, that we call the relaxed filtering method, and that takes into account the occurrence of the Hurst phenomenon, are larger than both the filtering method and the classical Lumley-Panofsky estimates. Finally, we found that there is no apparent relationship between H and the Obukhov stability parameter. The relative errors, however, do show stability dependence, particularly in the case of the error of the kinematic momentum flux in unstable conditions, and that of the kinematic sensible heat flux in stable conditions.

  6. Modelling and simulation of an energy transport phenomenon in a solid-fluid mixture

    International Nuclear Information System (INIS)

    Costa, M.L.M.; Sampaio, R.; Gama, R.M.S. da.

    1989-08-01

    In the present work a model for a local description of the energy transfer phenomenon in a binary (solid-fluid) saturated mixture is proposed. The heat transfer in a saturated flow (through a porous medium) between two parallel plates is simulated by using the Finite Volumes Method. (author) [pt

  7. The dryout phenomenon in the bend of a vertical U-tube evaporator

    International Nuclear Information System (INIS)

    Bailey, N.A.

    1977-02-01

    Tests have been carried out on an electrically heated vertical U-tube evaporator test section to investigate the phenomenon of 'premature' bend dryout and its subsequent disappearance. The dryout results are compared satisfactorily with an analytically based model while the associated wall temperatures are investigated with the aid of a simple one-dimensional conduction model. (author)

  8. Phenomenon of political actionism in modern society

    Directory of Open Access Journals (Sweden)

    V. M. Bavykina

    2016-08-01

    Full Text Available Political actionism is the fenomen in social and art space, that appeared in middle of XX century as the practice of critic and protest with using different artistic methods and techniques. Political actionism as art and political tradition exist in postsoviet space, especially in Russia where actionism appeared in 1990 years and develops for actually days. In other countries this phenomenon not such systematic.  But analyze and compare actions in different countries appears the possibility to understand social and cultural context, their difference and similarity. Actionism is a reaction to external public, social and political situation, but its appearance more like the symptom of some problem than its critic or display – traditional approaches in art.  Appearance of actionism also connected with inability of manifestation of personal and civil liberty, that’s why in actions liberty affairs in such radical and hyperbolized forms. First volume of Russian political actionism began in 1990 years (Oleg Kulik, Alexander Brener, Anatoly Osmolovsky etc. and Second volume in 2010 (art-group Voina, Pussy Riot, Pyotr Pavlensky. This process not only a transformation of artistic and traditional space, but also modification of reaction on social and political situation. Actionism becomes a source of new type of knowledge, that give a possibility to see the habitual reality from another side and find in it new pointes and concepts. Political actionism contracting own interpretation of already well-established phenomenon. Usual concepts of liberty, authority, social control are deconstructed in actions. Those destructions of reality and cultural reorientation destroys traditional imposed patterns of interaction and social structure. But new views, that appeared in daily life from actions, often has mistaken interpretations. Exist a problem about identification of actions, its correct interpretations and understanding of its causes. In article was

  9. Tenarife Island, Canary Island Archipelago, Atlantic Ocean

    Science.gov (United States)

    1991-01-01

    Tenarife Island is one of the most volcanically active of the Canary Island archipelago, Atlantic Ocean, just off the NW coast of Africa, (28.5N, 16.5W). The old central caldera, nearly filled in by successive volcanic activity culminating in two stratocones. From those two peaks, a line of smaller cinder cones extend to the point of the island. Extensive gullies dissect the west side of the island and some forests still remain on the east side.

  10. Sessile Drop Evaporation and Leidenfrost Phenomenon

    OpenAIRE

    A. K. Mozumder; M. R. Ullah; A. Hossain; M. A. Islam

    2010-01-01

    Problem statement: Quenching and cooling are important process in manufacturing industry for controlling the mechanical properties of materials, where evaporation is a vital mode of heat transfer. Approach: This study experimentally investigated the evaporation of sessile drop for four different heated surfaces of Aluminum, Brass, Copper and Mild steel with a combination of four different liquids as Methanol, Ethanol, Water and NaCl solution. The time of evaporation for the droplet on the hot...

  11. The Overshoot Phenomenon in Geodynamics Codes

    Science.gov (United States)

    Kommu, R. K.; Heien, E. M.; Kellogg, L. H.; Bangerth, W.; Heister, T.; Studley, E. H.

    2013-12-01

    The overshoot phenomenon is a common occurrence in numerical software when a continuous function on a finite dimensional discretized space is used to approximate a discontinuous jump, in temperature and material concentration, for example. The resulting solution overshoots, and undershoots, the discontinuous jump. Numerical simulations play an extremely important role in mantle convection research. This is both due to the strong temperature and stress dependence of viscosity and also due to the inaccessibility of deep earth. Under these circumstances, it is essential that mantle convection simulations be extremely accurate and reliable. CitcomS and ASPECT are two finite element based mantle convection simulations developed and maintained by the Computational Infrastructure for Geodynamics. CitcomS is a finite element based mantle convection code that is designed to run on multiple high-performance computing platforms. ASPECT, an adaptive mesh refinement (AMR) code built on the Deal.II library, is also a finite element based mantle convection code that scales well on various HPC platforms. CitcomS and ASPECT both exhibit the overshoot phenomenon. One attempt at controlling the overshoot uses the Entropy Viscosity method, which introduces an artificial diffusion term in the energy equation of mantle convection. This artificial diffusion term is small where the temperature field is smooth. We present results from CitcomS and ASPECT that quantify the effect of the Entropy Viscosity method in reducing the overshoot phenomenon. In the discontinuous Galerkin (DG) finite element method, the test functions used in the method are continuous within each element but are discontinuous across inter-element boundaries. The solution space in the DG method is discontinuous. FEniCS is a collection of free software tools that automate the solution of differential equations using finite element methods. In this work we also present results from a finite element mantle convection

  12. Radial electric field and transport near the rational surface and the magnetic island in LHD

    International Nuclear Information System (INIS)

    Ida, K.; Inagaki, S.; Tamura, N.

    2002-10-01

    The structure of the radial electric field and heat transport at the magnetic island in the Large Helical Device is investigated by measuring the radial profile of poloidal flow with charge exchange spectroscopy. The convective poloidal flow inside the island is observed when the n/m=1/1 external perturbation field becomes large enough to increase the magnetic island width above a critical value (15-20% of minor radius) in LHD. This convective poloidal flow results in a non-flat space potential inside the magnetic island. The sign of the curvature of the space potential depends on the radial electric field at the boundary of the magnetic island. The heat transport inside the magnetic island is studied with a cold pulse propagation technique. The experimental results show the existence of the radial electric field shear at the boundary of the magnetic island and a reduction of heat transport inside the magnetic island. (author)

  13. Nothingness and the placebo effect phenomenon

    DEFF Research Database (Denmark)

    Jensen, Tine

    The placebo effect is a pharmacological conundrum, since it is a medical effect that is produced by “nothing” because no pharmacologically active substance is present in placebo. Placebo has, among other things, been defined as an inert substance, often a calcium pill. Simultaneously it presents...... a posthuman angle, applying Karen Barad’s concept of agential realism to tackle the issue of nothingness. I argue that the placebo effect produces specific agencies in the placebo effect phenomenon – that is, both the subject under treatment and the placebo emerge in the placebo effect in the act of measuring it...

  14. Earnings Management: Obvious Phenomenon in Albanian Market

    Directory of Open Access Journals (Sweden)

    Teuta Llukani

    2013-07-01

    This paper is focused on reviewing the existing literature with regard to the Earnings Management in response to the growing pressure of investors, policy makers, and companies’ governance reform mechanisms to curb opportunistic behavior of the managers of these companies. It also examines the existence of this phenomenon in Albanian context as well as tests the importance of Modified Jones Model as an efficient tool for detection of abnormal accruals, used as a proxy for earnings management. The results show that firms in the Albanian market are engaged in earnings management initiatives.

  15. Memoirs as Cultural Phenomenon and Historical Source

    Directory of Open Access Journals (Sweden)

    Наталия Георгиевна Георгиева

    2012-03-01

    Full Text Available The article analyzes the role of memoirs as the native culture phenomenon, process and means of introducing memoirs to the social and scientific and educational practice. The author considers the Russian historians' views development on theoretical and methodological problems of memoirs studies. There are shown the offered variants and achieved results of development of defining «memoirs», studies of their specific peculiarities, principles and schemes of memoirs systematization as well as the criteria of defining their scientific and educational value as historical sources.

  16. Magnetic poles and a still unexplained phenomenon

    International Nuclear Information System (INIS)

    Trower, W.P.

    1981-01-01

    A review is given of ideas about magnetic monopoles. Attention is drawn to the still unexplained observations of Schein, Haskin and Glasser (1954), in which electron-positron pairs were produced in large numbers by a cosmic-ray interaction. Their experiment has been simulated in 300 GeV pN interactions at Fermilab, giving a production limit of 10 -7 per proton interaction. The explanation for this phenomenon may lie in magnetic monopoles, or it may be similar to that invoked to explain the so-called Centauro events. (A.W.)

  17. Studies of flow configurations up to the critical phenomenon at 80 kg/cm2

    International Nuclear Information System (INIS)

    Raisson, C.

    1968-12-01

    Tests performed at 80 kg/cm 2 allow to study two-phase flows and their evolution up to the critical heating. Three measurement methods have been used simultaneously: thermocouples, conductivity probe, short length pressure drops after the output. The 282 cm length stainless steel channel has an internal diameter of 0.6 cm and a wall thickness of 0.2 cm. Flow configuration results are comparable to those of the literature with some precision regarding some transition zones. Two critical heating regimes have been highlighted. The results demonstrate the interest of the method and the importance of hydrodynamic parameters on the critical heating phenomenon [fr

  18. A RELAP5 study to identify flow regime in natural circulation phenomenon

    Energy Technology Data Exchange (ETDEWEB)

    Sabundjian, Gaiane; Torres, Walmir M.; Macedo, Luiz A.; Mesquita, Roberto N.; Andrade, Delvonei A.; Umbehaun, Pedro E.; Conti, Thadeu N.; Masotti, Paulo H.F.; Belchior Junior, Antonio; Angelo, Gabriel, E-mail: gdjian@ipen.b, E-mail: umbehaun@ipen.b, E-mail: wmtorres@ipen.b, E-mail: tnconti@ipen.b, E-mail: rnavarro@ipen.b, E-mail: lamacedo@ipen.b, E-mail: pmasotti@ipen.b, E-mail: abelchior@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    There has been a crescent interest in the scientific community in the study of natural circulation phenomenon. New generation of compact nuclear reactors uses the natural circulation of the fluid as a system of cooling and of residual heat removal in case of accident or shutdown. The objective of this paper is to compare the flow patterns of experimental data and numerical simulation for the natural circulation phenomenon in two-phase flow regime. An experimental circuit built with glass tubes is used for the experiments. Thus, it allows the thermal hydraulic phenomena visualization. There is an electric heater as the heat source, a heat exchanger as the heat sink and an expansion tank to accommodate fluid density excursions. The circuit instrumentation consists of thermocouples and pressure meters to better keep track of the flow and heat transfer phenomena. Data acquisition is performed through a computer interface developed with LABVIEW. The characteristic of the regime is identified using photography techniques. Numerical modeling and simulation is done with the thermal hydraulic code RELAP5, which is widely used for this purpose. This numerical simulation is capable to reproduce some of the flow regimes which are present in the circuit for the natural circulation phenomenon. Comparison between experimental and numerical simulation is presented in this work. (author)

  19. [Virchowian Hansen's disease, Lucio's phenomenon, cryptococcosis].

    Science.gov (United States)

    1988-12-01

    A 75 years old white male, for 3 years on treatment for virchowian hanseniasis, was admitted with active HD lesions, infiltration on the base of right lung, leg ulcer and malaise. After two days he developed purpura and hemorrhagic blisters in the limbs. The biopsy of these lesions revealed Lucio phenomenon. The patient worsened with mental confusion, psychomotor agitation and anisocoric pupils. In the 18th day of internation the patient died. Necropsy revealed virchowian infiltration plenty of bacilli in the skin and viscera as well as tuberculoid granuloma with acid-fast bacilli in the liver, spleen and bone marrow. These findings lead us to review the patient's classification from virchowian to borderline. In the lungs, leptomeninge, renal papile, prostate and thyroid it was found loose tuberculoid granuloma with a great amount of fungi surrounded by a gelly halo resembling Criptococcus neoformans. These findings and the onset of Lucio phenomenon are discussed in a patient that has been treated for 3 years and still having several virchowian lesions and a great amount of acid-fast bacilli.

  20. Color doppler imaging of subclavian steal phenomenon

    International Nuclear Information System (INIS)

    Cho, Nari Ya; Chung, Tae Sub; Kim, Jai Keun

    1997-01-01

    To evaluate the characteristic color doppler imaging of vertebral artery flow in the subclavian steal phenomenon. The study group consisted of eight patients with reversed vertebral artery flow proved by color Doppler imaging. We classified this flow into two groups:(1) complete reversal;(2) partial reversal, as shown by Doppler velocity waveform. Vertebral angiography was performed in six of eight patients;color Doppler imaging and angiographic findings were compared. On color Doppler imaging, all eight cases with reversed vertebral artery flow showed no signal at the proximal subclavian or brachiocephalic artery. We confirmed shunting of six cases by performing angiography from the contralateral vertebral and basilar artery to the ipsilateral vertebral artery. On the Doppler spectrum, six cases showed complete reversal and two partial reversal. On angiography, one partial reversal case showed complete occlusion of the subclavian artery with abundant collateral circulation of muscular branches of the vertebral artery. On color Doppler imaging, a reversed vertebral artery suggests the subclavian steal phenomenon. In particular, partial reversal waveform may reflect collateral circulation

  1. The happy victimizer phenomenon: Not found here

    Directory of Open Access Journals (Sweden)

    Jevtić Ana

    2014-01-01

    Full Text Available Children’s attribution of emotions to a moral transgressor is an important research topic in the psychology of moral and emotional development. This is especially because of the so-called Happy Victimizer Phenomenon (HVP where younger children attribute positive emotions to a moral transgressor described in a story. In the two studies that we have conducted (children aged 5, 7 and 9, 20 of each age; 10 of each age in the second study we have tested the possible influence of the fear of sanctions and the type of transgression (stealing and inflicting body injuries on the attribution of emotions. Children were presented with stories that described transgressions and they were asked to answer how the transgressor felt. The fear of sanctions did not make a significant difference in attribution but the type of transgression did - more negative emotions were attributed for inflicting body injuries than for stealing. Positive emotions were explained with situational-instrumental explanations in 84% of cases while negative emotions were explained with moral explanations in 63,5%. Girls attributed more positive emotions (61% than boys (39%. However, our main finding was that, for the aforementioned age groups, we did not find the HVP effect although it has regularly been registered in foreign studies. This finding denies the generalizability of the phenomenon and points to the significance of disciplining styles and, even more so, culture for children’s attribution of emotions to moral transgressors.

  2. Turnpike phenomenon and infinite horizon optimal control

    CERN Document Server

    Zaslavski, Alexander J

    2014-01-01

    This book is devoted to the study of the turnpike phenomenon and describes the existence of solutions for a large variety of infinite horizon optimal control classes of problems.  Chapter 1 provides introductory material on turnpike properties. Chapter 2 studies the turnpike phenomenon for discrete-time optimal control problems. The turnpike properties of autonomous problems with extended-value intergrands are studied in Chapter 3. Chapter 4 focuses on large classes of infinite horizon optimal control problems without convexity (concavity) assumptions. In Chapter 5, the turnpike results for a class of dynamic discrete-time two-player zero-sum game are proven. This thorough exposition will be very useful  for mathematicians working in the fields of optimal control, the calculus of variations, applied functional analysis, and infinite horizon optimization. It may also be used as a primary text in a graduate course in optimal control or as supplementary text for a variety of courses in other disciplines. Resea...

  3. The United States pork niche market phenomenon.

    Science.gov (United States)

    Honeyman, M S; Pirog, R S; Huber, G H; Lammers, P J; Hermann, J R

    2006-08-01

    After the broad industrialization of the US pork industry, there has been a development of niche markets for export and domestic pork; that is, there is a pork niche market phenomenon. The US pork niche market phenomenon is characterized, and 2 of the major markets are explained in detail. With the Midwest's tradition of a diversified family-based agriculture and record low hog prices of the late 1990s, the conditions were conducive for this phenomenon to develop. Pork niche markets utilize various sales methods including Internet sales, local abattoir sales, direct marketing, farmer networks, and targeting to organized groups. In 2003, there were approximately 35 to 40 active pork niche marketing efforts in Iowa. The Berkshire breed is an example of a swine breed that has had a recent resurgence because of niche markets. Berkshire pork is known for tenderness and excellent quality. Berkshire registrations have increased 4-fold in the last 10 yr. One of the larger niche marketers of "natural pork" is Niman Ranch Pork, which has more than 400 farmer-producers and processes about 2,500 pigs weekly. Many US consumers of pork are interested in issues concerning the environment, food safety, pig welfare, and pig farm ownership and structure. These consumers may be willing to pay more for pork from farmers who are also concerned about these issues. Small- and medium-sized swine farmers are active in pork niche markets. Niche markets claim product differentiation by superior or unique product quality and social attributes. Quality attributes include certain swine breeds, and meat quality, freshness, taste or flavor, and tenderness. Social or credence attributes often are claimed and include freedom from antibiotics and growth promotants; local family farm production; natural, organic, outdoor, or bedded rearing; humane rearing; known origin; environmentally friendly production; and the absence of animal by-products in the feed. Niche pork markets and alternative swine

  4. Advanced One-Dimensional Entrained-Flow Gasifier Model Considering Melting Phenomenon of Ash

    Directory of Open Access Journals (Sweden)

    Jinsu Kim

    2018-04-01

    Full Text Available A one-dimensional model is developed to represent the ash-melting phenomenon, which was not considered in the previous one-dimensional (1-D entrained-flow gasifier model. We include sensible heat of slag and the fusion heat of ash in the heat balance equation. To consider the melting of ash, we propose an algorithm that calculates the energy balance for three scenarios based on temperature. We also use the composition and the thermal properties of anorthite mineral to express ash. gPROMS for differential equations is used to solve this algorithm in a simulation; the results include coal conversion, gas composition, and temperature profile. Based on the Texaco pilot plant gasifier, we validate our model. Our results show good agreement with previous experimental data. We conclude that the sensible heat of slag and the fusion heat of ash must be included in the entrained flow gasifier model.

  5. What Is Heat? Inquiry regarding the Science of Heat

    Science.gov (United States)

    Rascoe, Barbara

    2010-01-01

    This lab activity uses inquiry to help students define heat. It is generic in that it can be used to introduce a plethora of science content across middle and high school grade levels and across science disciplines that include biology, Earth and space science, and physical science. Even though heat is a universal science phenomenon that is…

  6. 城市地表温度热岛影响因素研究进展%An Overview and Perspective about Causative Factors of Surface Urban Heat Island Effects

    Institute of Scientific and Technical Information of China (English)

    谢苗苗; 王仰麟; 付梅臣

    2011-01-01

    城市地表温度热岛是城市生态环境效应研究的热点之一,其影响因素研究为缓解城市热岛带来的负效应、促进城市可持续发展提供依据.本文系统回顾了国内外关于城市地表温度热岛影响因素的研究进展.首先结合热岛效应表征的地表能量过程,基于景观生态学格局-过程理论,从地表能量吸收释放、转换及传输3种过程中归纳热岛效应的影响机理,分别对应地表覆盖、人为活动和景观格局特征3方面影响因素;其次,从影响因素的3个方面分析了近年来的研究进展,并比较了国内外地表温度热岛综合影响因素研究领域的异同;最后探讨了研究进展与热岛效应影响机理研究的差距,提出利用多源数据深化城市热岛效应的机理性与综合影响因素研究,以期为制定热岛效应缓解策略有所启示.%Urban heat island (UHI) is a hotspot in the study about urban ecological and environmental effects. UHI effects are caused by multiple factors, and the synthesized mechanism study can supply a foundation to release the negative effects of UHI.This study proposes a theory framework for causative factors of surface urban heat island (SUHI) by analyzing the process of surface energy on the basis of landscape ecology. Since surface temperature represents the process of surface energy, we examine the causative factors of this process, which includes energy absorption/emission, energy translation, and energy transmission. The internal and external progresses on each kind of causative factors are reviewed in this study. We also compare the internal studies on synthesized mechanism of SUHI with external studies. By the comparison of progresses of causative factor studies and the mechanism of SUHI, we deduce the prospect on this field.The energy absorption and emission of surface represent the ability to absorb solar shortˉwave radiation, and the capacity to emit earth' s surface longˉwave radiation

  7. Phenomenon of Uncertainty as a Subjective Experience

    Directory of Open Access Journals (Sweden)

    Lifintseva A.A.

    2018-04-01

    Full Text Available The phenomenon of uncertainty in illness of patients is discussed and analyzed in this article. Uncertainty in illness is a condition that accompanies the patient from the moment of appearance of the first somatic symptoms of the disease and could be strengthened or weakened thanks to many psychosocial factors. The level of uncertainty is related to the level of stress, emotional disadaptation, affective states, coping strategies, mechanisms of psychological defense, etc. Uncertainty can perform destructive functions, acting as a trigger for stressful conditions and launching negative emotional experiences. As a positive function of uncertainty, one can note a possible positive interpretation of the patient's disease. In addition, the state of uncertainty allows the patient to activate the resources of coping with the disease, among which the leading role belongs to social support.

  8. FOREIGN FIGHTERS PHENOMENON IN THE EUROPEAN UNION

    Directory of Open Access Journals (Sweden)

    Florin-Alexandru LUCA

    2018-06-01

    Full Text Available Hybrid war is a reality; war does not depend only on conventional means, but includes communication and propaganda strategies whose role is increasingly important. In the last few years, terrorist cells have spent and keep spending many energies in a global propaganda business. This activity is a fundamental aspect of the conflict. This promotion campaign serves several purposes: legitimating its authority, recruiting militants and motivating sympathizers, and intimidating and conditioning those whose cells they consider enemies. What draws our attention is the sophisticated level of professionalism they demonstrate in managing propaganda and terror. This paper seeks to provide a broader view of the European Foreign Fighters (FF phenomenon by analyzing this target group from a marketing point of view in order to lay the foundations for a strategy to counteract them.

  9. Melting phenomenon and laser annealing in semiconductors

    International Nuclear Information System (INIS)

    Narayan, J.

    1981-03-01

    The work on annealing of displacement damage, dissolution of boron precipitates, and the broadening of dopant profiles in semiconductors after treating with ruby and dye laser pulses is reviewed in order to provide convincing evidence for the melting phenomenon and illustrate the mechanism associated with laser annealing. The nature of the solid-liquid interface and the interface instability during rapid solidification is considered in detail. It is shown that solute concentrations after pulsed laser annealing can far exceed retrograde maxima values. However, there is a critical solute concentration above which a planar solid-liquid interface becomes unstable and breaks into a cellular structure. The solute concentrations and cell sizes associated with this instability are calculated using a perturbation theory, and compared with experimental results

  10. [Electroencephalographic characteristics of the deja vu phenomenon].

    Science.gov (United States)

    Vlasov, P N; Cherviakov, A V; Gnezdinsiĭ, V V

    2013-01-01

    Déjà vu (DV, from French "already seen") is an aberration of psychic activity associated with transitory erroneous perception of novel circumstances, objects, or people as already known. An aim of the study was to investigate EEG characteristics of DV in patients with epilepsy. We studied 166 people (63.2% women, mean age 25.17±9.19 years). The DV phenomenon was studied in patients (27 people) and in a control group (139 healthy people). Patients were interviewed for DV characteristics and underwent a long (12-16 h) ambulatory EEG-monitoring study. In EEG, DV episodes in patients began with polyspike activity in the right temporal lobe and, in some cases, ended with the slow-wave theta-delta activity in the right hemisphere.

  11. Physics of cryogenics an ultralow temperature phenomenon

    CERN Document Server

    Zohuri, Bahman

    2018-01-01

    Physics of Cryogenics: An Ultralow Temperature Phenomenon discusses the significant number of advances that have been made during the last few years in a variety of cryocoolers, such as Brayton, Joule-Thomson, Stirling, pulse tube, Gifford-McMahon and magnetic refrigerators. The book reviews various approaches taken to improve reliability, a major driving force for new research areas. The advantages and disadvantages of different cycles are compared, and the latest improvements in each of these cryocoolers is discussed. The book starts with the thermodynamic fundamentals, followed by the definition of cryogenic and the associated science behind low temperature phenomena and properties. This book is an ideal resource for scientists, engineers and graduate and senior undergraduate students who need a better understanding of the science of cryogenics and related thermodynamics.

  12. PUBLIC RELATIONS AS AN INFORMATION PROCESS PHENOMENON

    Directory of Open Access Journals (Sweden)

    TKACH L. M.

    2016-06-01

    Full Text Available Formulation of the problem. If public relations as a phenomenon of information management are examined, we deal with the question of knowledge content and nature of relationship of PR with environment, ability to manage the perception and attitude of people to events in the environment; ensure priority of information over other resources. Goal. To investigate the concept of "public relations" of foreign and domestic experts; consider the typology of the public and the "laws" of public opinion; define the basic principles according to which relations with public should be built, and to identify PR activities as a kind of social communication. Conclusions. Public relations on the basis of advanced information and communication technologies create fundamentally new opportunities for information control and influence on public consciousness.

  13. Prussian phenomenon and its historical distortion

    Directory of Open Access Journals (Sweden)

    Oleg Y. Plenkov

    2016-03-01

    Full Text Available The article deals with the phenomenon of Prussia. Once, Prussia had been the largest continental Protestant state in Europe. The main issue of this phenomenon is that upon the tragic events of the World War II Prussian history and heritage had been considerably distorted, in order to compensate somehow for the dreadful casualties suffered by the victorious powers. The common European misconception implied that Prussia had been the bulwark of militarism, and therefore had to bear all the responsibility for the atrocities of war. Unfortunately, the majority of modern German historians share such misinterpretation of Prussian heritage in order to please false political correctness, perhaps, as an act of contrition for National Socialism and its crimes. However, the Prussian tradition and history go far beyond this militarism, and this article explains what ways. The authors believe that there should not be any prejudices and biases, that any subject should be examined sine ira et studio. Moreover, given that it is possible to characterize the Great French Revolution as a juristic one, and the Great October revolution – as a social one, the Prussian revolution “from above”, led by the first representatives of the Hohenzollern family, may be well considered as a pedagogical revolution. This revolution did bring definitely positive changes; they are surveyed in the article. The French Revolution has not eliminated the covetousness of the bourgeoisie after 1789; despotism of the authorities and people’s passiveness similarly have remained unaltered in Russia after 1917. On the contrary, Federal Republic of Germany of nowadays, distinctive for its law, order and effective responsible government is unthinkable without Prussian heritage.

  14. SUBJECTIVE RESOURCESTHE PSYCHOLOGICAL AND ACMEOLOGICAL PHENOMENON

    Directory of Open Access Journals (Sweden)

    Marina Ivanovna Ilyushina

    2017-02-01

    Full Text Available The article is devoted to the moment the subject – resources of a person. Be caused, “loss” possible resources: lack of personal self-realization, the maladjustment of the individual in a social environment, obstructed line of identity, which in some cases is accompanied by incomplete personal self-actualization and self-sufficiency. The article emphasizes the importance of the subjective component in understanding, identifying, understanding, mobilization, conservation and accumulation of resources of the individual. Man is an active Converter to your reality, where he and reality are the result of the conversion and source conversion. The author proposed the concept of “subjective resource” as a necessary factor for quality of life of the individual, achievement of tops of her self-improvement and self-development, both professionally and personally. Subjective component emphasizes the role of the individual in the conservation, transformation, accumulation, the reallocation of resources. Purpose. The subject of analysis is the awareness, understanding person own resources – the subjective resourcest. The author aims to describe the subjective resourcest as psychological and acmeological phenomenon to reveal its essence and to suggest the methodology of the study of this phenomenon, showing the importance of verbalization resources through associative image without relying on the visibility and relying on her. Methodology. The basis of the study form a General theoretical methods (theoretical analysis, including psychological analysis, generalization, systematization, system description. Results. The results of the work lies in the fact that the author has defined the concept of “subjective resourcesthe” and proposed methodology of the study. The obtained results may be of interest to improve the efficiency of the work to define the resources of the individual. The results and method of determining a subjective resource

  15. Resonant island divertor experiments on text

    International Nuclear Information System (INIS)

    deGrassie, J.S.; Evans, T.E.; Jackson, G.L.

    1988-09-01

    The first experimental tests of the resonant island divertor (RID) concept have been carried out on the Texas Experimental Tokamak (TEXT). Modular perturbation coils produce static resonant magnetic fields at the tokamak boundary. The resulting magnetic islands are used to guide heat and particle fluxes around a small scoop limiter head. An enhancement in the limiter collection efficiency over the nonisland operation, as evidenced by enhanced neutral density within the limiter head, of up to a factor of 4 is obtained. This enhancement is larger than one would expect given the measured magnitude of the cross-field particle transport in TEXT. It is proposed that electrostatic perturbations occur which enhance the ion convection rate around the islands. Preliminary experiments utilizing electron cyclotron heating (ECH) in conjunction with RID operation have also have been performed. 6 refs., 3 figs

  16. Researching Pacific island livelihoods:

    DEFF Research Database (Denmark)

    Egelund Christensen, Andreas; Mertz, Ole

    2010-01-01

    on contemporary theories of nissology and conceptual analytical frameworks for island research. Through a review of selected case-study-based island literature on changing livelihoods coming out of the South Pacific, we wish to illustrate and discuss advantages of finding common grounds for small island studies....... The focus is on two dimensions of island livelihood, migration and natural resource management, both of which are significant contributors in making island livelihoods and shaping Pacific seascapes. We argue that there is still a substantial lack of studies targeting small island dynamics that are empirical...

  17. Priming intelligent behavior: an elusive phenomenon.

    Directory of Open Access Journals (Sweden)

    David R Shanks

    Full Text Available Can behavior be unconsciously primed via the activation of attitudes, stereotypes, or other concepts? A number of studies have suggested that such priming effects can occur, and a prominent illustration is the claim that individuals' accuracy in answering general knowledge questions can be influenced by activating intelligence-related concepts such as professor or soccer hooligan. In 9 experiments with 475 participants we employed the procedures used in these studies, as well as a number of variants of those procedures, in an attempt to obtain this intelligence priming effect. None of the experiments obtained the effect, although financial incentives did boost performance. A Bayesian analysis reveals considerable evidential support for the null hypothesis. The results conform to the pattern typically obtained in word priming experiments in which priming is very narrow in its generalization and unconscious (subliminal influences, if they occur at all, are extremely short-lived. We encourage others to explore the circumstances in which this phenomenon might be obtained.

  18. Informal worker phenomenon in housing construction project

    Science.gov (United States)

    Wijayaningtyas, Maranatha; Sipan, Ibrahim; Lukiyanto, Kukuh

    2017-11-01

    The informal workers phenomenon on housing construction projects in Indonesia is different from workers in other sectors who would always request as permanent employees. Substantively, the informal workers are disinclined to be bound as permanent employees which different from the general labor paradigm. Hence, the objective of this study is to find out how the labour selection process, the factors that affected their performance, and the suitable wage system to achieve the target completion of housing construction project. The qualitative method is used to uncover and understand the meaning behind the phenomena (numina) of informal workers action and their influence on housing construction project which called phenomenological approach. Five informal workers and two project managers were selected as informants based on predetermined criteria with in-depth interviews. The results showed that the informal worker were more satisfied with the wage based on unit price while working in the housing construction project for the flexibility in working hours. In addition, the developer was also relieved because they only control the quality and the achievement of the project completion time which supported by informal worker leader. Therefore, these findings are beneficial for both of developer and government as policy maker to succeed the housing program in Indonesia.

  19. Virtual reality as a social phenomenon

    Directory of Open Access Journals (Sweden)

    Markova T. V.

    2018-05-01

    Full Text Available the article is devoted to the study of virtual reality as a social phenomenon. Through an appeal to the past, its genesis is analyzed, as well as its significance in modern realities. The latter is viewed from both a social and a personal point of view. Comparing the number of supporters of virtual communication with the number of people of conservative views, conclusions are drawn about the tendency to depart from the usual communication. It allows to assert that the problem of the termination of live communication is relevant to this day. Inferences allow us to assert that the problem of replacing real communication is different. After looking at the positive consequences, the introduction of the mind into virtual reality, it is affirmed that there are good sides to this action. Through analysis, the causes of entering the World Wide Web are generated. In conclusion, the question is raised about the need for virtual reality in everyday life, its problems, as well as the prospects for development.

  20. The keloid phenomenon: progress toward a solution.

    Science.gov (United States)

    Louw, Louise

    2007-01-01

    For centuries, keloids have been an enigma and despite considerable research to unravel this phenomenon no universally accepted treatment protocol currently exists. Historically, the etiology of keloids has been hypothesized by multiple different theories; however, a more contemporary view postulates a multifactoral basis for this disorder involving nutritional, biochemical, immunological, and genetic factors that play a role in this abnormal wound healing. Critical to the process of preventing or managing keloids is the need to locally control fibroblasts and their activities at the wound site. In recent years, considerable evidence has accumulated demonstrating the importance of fatty acids and bioactive lipids in health and disease, especially those involving inflammatory disorders or immune dysfunction. If hypertrophic scarring and keloid formation can be argued to have significant inflammatory histories, then it is possible to postulate a role for lipids in their etiology and potentially in their treatment. This report briefly visits past views and theories on keloid formation and treatment, and offers a theoretical rationale for considering adjuvant fatty acid therapy for keloid management. Sufficient scientific evidence in support of fatty acid strategies for the prevention and treatment of keloids currently exists, which offer opportunities to bridge the gap between the laboratory and the clinic. The intent of this paper is to serve as a basic guideline for researchers, nutritionists, and clinicians interested in keloids and to propose new directions for keloid management.

  1. Klein tunneling phenomenon with pair creation process

    Science.gov (United States)

    Wu, G. Z.; Zhou, C. T.; Fu, L. B.

    2018-01-01

    In this paper, we study the Klein tunneling phenomenon with electron-positron pair creation process. Pairs can be created from the vacuum by a supercritical single-well potential (for electrons). In the time region, the time-dependent growth pattern of the created pairs can be characterized by four distinct regimes which can be considered as four different statuses of the single well. We find that if positrons penetrate the single well by Klein tunneling in different statuses, the total number of the tunneling positrons will be different. If Klein tunneling begins at the initial stage of the first status i.e. when the sing well is empty, the tunneling process and the total number of tunneling positrons are similar to the traditional Klein tunneling case without considering the pair creation process. As the tunneling begins later, the total tunneling positron number increases. The number will finally settle to an asymptotic value when the tunneling begins later than the settling-down time t s of the single well which has been defined in this paper.

  2. The Sexting Phenomenon in Spanish Nursing Students.

    Science.gov (United States)

    Gutiérrez-Puertas, Vanesa; Gutiérrez-Puertas, Lorena; Aguilera-Manrique, Gabriel; Baños-Martín, María Del Mar; Granados-Gámez, Genoveva; Márquez-Hernández, Verónica V

    2017-08-01

    One of the adverse effects arising among young people who engage in various social practices is the phenomenon of sexting. Sexting involves the production and delivery of sexual content voluntarily and freely and, in many cases, without the consent of the recipient. The aim of this study was to describe the presence of sexting in undergraduate students at the College of Nursing of the University of Almeria in Spain. It is a descriptive cross-sectional quantitative study. A total of 105 undergraduate nursing students completed the sexuality and technology questionnaire. The questionnaire consists of seven dimensions with 59 items. Depending on size, statistically significant differences between the use of social networks and the dimension "sexting actions completed" and the dimension "position on statements about sexting" were found. No statistically significant differences between gender and the practice of sexting were found. The three main reasons for sexting match in both genders, these being "to draw attention," "as a sexy gift," and "to feel sexy." Nursing students associated behaviors to show sexting, being a standard practice, common in both genders. Future research should consider the possible influence of this behavior on future professionals and on the field of nursing.

  3. The Outsider Phenomenon in Teenage Groups

    Directory of Open Access Journals (Sweden)

    Kuminskya E.A.

    2017-08-01

    Full Text Available The article is devoted to the problem of outsidership in groups of younger and older adolescents. We assumed that there are personal qualities that distinguish outsiders from other students, which allows us to speak of outsidership as a separate group and personal phenomenon. The study involved 246 students of Moscow schools of younger and older adolescents, 60 of whom took an outsider position in the group. To test the hypothesis were used: a personal questionnaire for adolescents HSPQ (R. Cattell, questionnaire Emin to determine the level of emotional intelligence (D.V. Lyusin, the technique of " Suggestibility " (O.E. Rybakov. To identify statistical differences, the Student's t-test and the Mann-Whitney U-test were used, p ≤ 0.05. The results of the study showed that outsiders of adolescence are indeed characterized by a number of personal characteristics that distinguish them from their peers. Differences in personal characteristics of outsiders at different stages of adolescence have their own characteristics.

  4. Lung tissue mechanics as an emergent phenomenon.

    Science.gov (United States)

    Suki, Béla; Bates, Jason H T

    2011-04-01

    The mechanical properties of lung parenchymal tissue are both elastic and dissipative, as well as being highly nonlinear. These properties cannot be fully understood, however, in terms of the individual constituents of the tissue. Rather, the mechanical behavior of lung tissue emerges as a macroscopic phenomenon from the interactions of its microscopic components in a way that is neither intuitive nor easily understood. In this review, we first consider the quasi-static mechanical behavior of lung tissue and discuss computational models that show how smooth nonlinear stress-strain behavior can arise through a percolation-like process in which the sequential recruitment of collagen fibers with increasing strain causes them to progressively take over the load-bearing role from elastin. We also show how the concept of percolation can be used to link the pathologic progression of parenchymal disease at the micro scale to physiological symptoms at the macro scale. We then examine the dynamic mechanical behavior of lung tissue, which invokes the notion of tissue resistance. Although usually modeled phenomenologically in terms of collections of springs and dashpots, lung tissue viscoelasticity again can be seen to reflect various types of complex dynamic interactions at the molecular level. Finally, we discuss the inevitability of why lung tissue mechanics need to be complex.

  5. Empirical Study on the Creative Accounting Phenomenon

    Directory of Open Access Journals (Sweden)

    Cernusca Lucian

    2016-06-01

    Full Text Available The present study aims to analyze the accounting professionals’ point of view as opposed to the students and master students’ one, regarding the creative accounting phenomenon existence and manifestation forms. In order to accomplish this objective, there has been used the poll/investigation, as a research method and the questionnaire, as a research instrument. Within the study, there is suggested the testing of more hypotheses that contribute to the clarifying of the aspects wished to be analyzed through the research. These hypotheses’ acceptance or rejection is based on the „chi-square“ (Karl Pearson statistical test and rank ordering method. Trying to elaborate a global conclusion of the questionnaire, there could be noticed the fact that over 50% from the questioned accounting students are not tempted to use the creative accounting practices and techniques in order to optimize the taxation without breaking the actual law regulations. At the opposite side, more than a half from the questioned accounting professionals would use these practices without breaking the law regulations that lead to the taxation’s optimization. The creative accounting has a negative connotation if the accurate image of the financial position and of the performance is not targeted because it represents the essential factor for elaborating and grounding the accounting policies. However, the positive side of the creative accounting is not excluded, given that one appeals to the „fair“ professional judgment of the accounting professionals and to the good faith of managers.

  6. Mapping The Phenomenon Of Students’ Entrepreneurial Intention

    Directory of Open Access Journals (Sweden)

    Yud Buana

    2016-09-01

    Full Text Available This research mapped the phenomena that occured in students who are taking classes entrepreneurship that was limited by entrepreneurial knowledge, personal attitude, social norms and self-efficacy. Using descriptive statistics on the answers of 794 respondents, who were students of Bina Nusantara University, produced a variety of results. Based on entrepreneurial knowledge, students still felt hesitant to be able to start and run the entrepreneurial process. On the other hand, self-efficacy and personal attitude reflect a positive thing associated, while the support of family and the environment around where they livevalued invariety. Although this research discovered phenomenon using all the attributes having impacts on entrepreneurship intention, potential students who are properly trained have a probability of playing a leading role in this regard. The benefits that can be expected from this research are useful in identifying suitable students for any entrepreneurial activity in the future with the support of educational institutions, families, and the government as a whole to form the atmosphere of an entrepreneurial culture.

  7. Evolution as a molecular cooperative phenomenon

    International Nuclear Information System (INIS)

    Chela-Flores, J.

    1991-06-01

    We discuss an hypothesis according to which microscopic mechanisms due to cooperation, at the molecular level, may have been key factors in the evolution of life on Earth. We view our hypothesis as a natural extension to the molecular level of viewing cooperation (symbiosis) as an evolutionary driving force; this does not restrict the interpretation of the evolutionary process to be the result of slow accumulation of mutations in the DNA. Some evidence supporting this hypothesis is discussed: (a) The Salam enhancement factor. This molecular phenomenon was recently introduced in order to understand the bases of the first unifying principle of biochemistry, namely that transcription of all known genes in prokaryotes, protists, metazoan, and metaphytes are translated into L-amino acids, except for some bacterial membrane proteins. (b) The role that cooperative phenomena may have played in the origin of evolution itself, i.e., in the resolution of Sagan's ultraviolet paradox. (c) The relationship between evolution and the constraints imposed by embryonic development. This is considered from the point of view of molecular cooperative phenomena. (author). Refs

  8. Priming Intelligent Behavior: An Elusive Phenomenon

    Science.gov (United States)

    Shanks, David R.; Newell, Ben R.; Lee, Eun Hee; Balakrishnan, Divya; Ekelund, Lisa; Cenac, Zarus; Kavvadia, Fragkiski; Moore, Christopher

    2013-01-01

    Can behavior be unconsciously primed via the activation of attitudes, stereotypes, or other concepts? A number of studies have suggested that such priming effects can occur, and a prominent illustration is the claim that individuals' accuracy in answering general knowledge questions can be influenced by activating intelligence-related concepts such as professor or soccer hooligan. In 9 experiments with 475 participants we employed the procedures used in these studies, as well as a number of variants of those procedures, in an attempt to obtain this intelligence priming effect. None of the experiments obtained the effect, although financial incentives did boost performance. A Bayesian analysis reveals considerable evidential support for the null hypothesis. The results conform to the pattern typically obtained in word priming experiments in which priming is very narrow in its generalization and unconscious (subliminal) influences, if they occur at all, are extremely short-lived. We encourage others to explore the circumstances in which this phenomenon might be obtained. PMID:23637732

  9. Vacuum phenomenon in the metatarsophalangeal joint of a horse

    International Nuclear Information System (INIS)

    Specht, T.E.; Poulos, P.W.; Metcalf, M.R.; Robertson, I.D.

    1990-01-01

    Vacuum phenomenon was induced inadvertently during radiographic examination of a metatarsophalangeal joint of a lame horse. The phenomenon was recreated in a sound horse when a metacarpophalangeal joint was radiographed in a stress-flexed position. Distraction of apposing articular surfaces may induce the vacuum phenomenon, which could result in misdiagnosis of an osteochondral defect or fracture

  10. Demonstration of surface plasmons in metal island films and the effect of the surrounding medium--An undergraduate experiment

    Energy Technology Data Exchange (ETDEWEB)

    Orfanides, P. [Department of Physics, The University of Memphis, Memphis, Tennessee 38152 (United States); Buckner, T. F. [Department of Physics, The University of Memphis, Memphis, Tennessee 38152 (United States); Buncick, M. C. [Department of Physics, The University of Memphis, Memphis, Tennessee 38152 (United States); Meriaudeau, F. [LE21, 12 rue de la fonderie, 71200 Le Creusot, (France); Ferrell, T. L. [Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States)

    2000-10-01

    We present a demonstration of the surface plasmon phenomenon as it occurs in thin metal island films. The metal films are deposited on glass microscope slides. The effect of the surface plasmon resonance may be observed visually on the slide without further apparatus. Heating the film changes the shape of the islands and therefore the resonant frequency of the surface plasmon and changes the color of the film. Placing the film in a dielectric medium changes the resonance condition for the surface plasmon again and changes the color again. We show this by coating the slides with commercially available liquids with different indices of refraction. We present a theoretical model that assumes the islands are oblate spheroids. There are enough details given so that the equations can be programed and the theoretical optical absorbance can be reproduced. We also present a modification to the theory so that the shift in resonant frequency can be calculated when the spheroids are immersed in the index fluids. We describe our apparatus for making thin films and our optical spectrometer system. We then present optical absorbance measurements of thin films of both Ag and Au in air and in two liquids with different indices of refraction. (c) 2000 American Association of Physics Teachers.

  11. Diomede Islands, Bering Straight

    Science.gov (United States)

    2008-01-01

    The Diomede Islands consisting of the western island Big Diomede (also known as Imaqliq, Nunarbuk or Ratmanov Island), and the eastern island Little Diomede (also known as Krusenstern Island or Inaliq), are two rocky islands located in the middle of the Bering Strait between Russia and Alaska. The islands are separated by an international border and the International Date Line which is approximately 1.5 km from each island; you can look from Alaska into tomorrow in Russia. At the closest land approach between the United States, which controls Little Diomede, and Russia, which controls Big Diomede, they are 3 km apart. Little Diomede Island constitutes the Alaskan City of Diomede, while Big Diomede Island is Russia's easternmost point. The first European to reach the islands was the Russian explorer Semyon Dezhnev in 1648. The text of the 1867 treaty finalizing the sale of Alaska uses the islands to designate the border between the two nations. The image was acquired July 8, 2000, covers an area of 13.5 x 10.8 km, and is located at 65.8 degrees north latitude, 169 degrees west longitude. The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

  12. Tales of island tails

    NARCIS (Netherlands)

    Groot, de Alma V.; Oost, Albert P.; Veeneklaas, Roos M.; Lammerts, Evert Jan; Duin, van Willem E.; Wesenbeeck, van Bregje K.

    2016-01-01

    The Frisian islands (Southern North Sea) have extensive island tails, i.e. the entire downdrift side of an island consisting of salt marshes, dunes, beaches and beach plains, and green beaches. Currently, large parts of these tails are ageing and losing dynamics, partly due to human influence.

  13. Rhode Island unemployment

    OpenAIRE

    Leonard Lardaro

    2010-01-01

    How can a state like Rhode Island have such a high unemployment rate? This question has been asked often over the past year, especially since at one point, Rhode Island found itself with the dubious distinction of having the highest unemployment rate in the United States. Following that extreme, Rhode Island seemed to settle into a niche where its rank was third nationally.

  14. A suspicious reason for Raynaud's phenomenon: Intrauterine device.

    Science.gov (United States)

    Diken, Adem I; Yalçınkaya, Adnan; Aksoy, Eray; Yılmaz, Seyhan; Çağlı, Kerim

    2015-06-01

    Primary Raynaud's phenomenon may be insistent in patients under medical therapy, and intrauterine devices may be an unnoticed reason in these patients. Fluctuations in female sex hormone status were reported to be associated with the emergence of primary Raynaud's phenomenon symptoms. The use of intrauterine devices was not reported to be associated with Raynaud's phenomenon previously. Intrauterine device may stimulate vascular hyperactivity regarding hormonal or unknown mechanisms that result in Raynaud's phenomenon. We present a postmenopausal patient who complained of primary Raynaud's phenomenon symptoms and had recovery after the removal of her copper intrauterine device. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  15. Cognitive approach in studying of entrepreneur phenomenon

    Directory of Open Access Journals (Sweden)

    Kulakovsky T.Yu.

    2017-06-01

    Full Text Available The research indicates that there is no prospect of searching specific entrepreneurial traits that are necessary for conducting successful entrepreneurial activity. It is pointed on the impossibility to fully explain the negative state of domestic business exclusively by the influence of environmental factors. The paper points on the necessity of concentrating the scientific search on the cognitive features of personality, as factors that contribute to success of entrepreneurial activities. It is revealed that the decision-making process directed on problem-solving in entrepreneurial activity, from an entrepreneurial idea to obtaining an appropriate result, cannot be algorithmized. The author points out on the insufficiency of attempts to model cognitive processes of entrepreneurs, in which their cognitive activity is regarded as an information processing system that resembles a computer. The results obtained in the framework of the cognitive approach in studying the phenomenon of the entrepreneur are analyzed. Particular emphasis is placed on the features of heuristics and cognitive biases. It is stated that the high levels of uncertainty, novelty, time deficit, information overload and emotional tension facilitate influence of cognitive biases on the cognitive processes of the entrepreneur. The role of «availability heuristic», «anchoring and adjustment heuristic», «confirmation bias», «hindsight bias» and self-efficacy in making decisions about starting an entrepreneurial activity are considered. The article points to the role of «belief in the law of small numbers» and the illusion of control in establishing optimistic bias (overly positive self-esteem, excessive optimism about future plans and events that lead to reducing the subjective perception of entrepreneurial risk.

  16. Shifted identical bands: A new phenomenon

    International Nuclear Information System (INIS)

    Jones, E.F.; Lima, A.P. de; Gore, P.M.; Hamilton, J.H.; Ramayya, A.V.; Dodder, R.S.; Kormicki, J.; Hwang, J.K.; Beyer, C.J.; Zhang, X.Q.; Zhu, S.J.; Ter-Akopian, G.M.; Oganessian, Yu.Ts.; Daniel, A.V.; Rasmussen, J.O.; Lee, I.Y.; Cole, J.D.; Drigert, M.W.; Ma, W.-C.

    2001-01-01

    The levels in 162 Gd were identified in spontaneous fission studies. Its transition energies are remarkably similar to those in 160 Gd. From that work, an analysis of yrast bands in even-even proton to neutron-rich Ba to Pb nuclei led to the discovery of a new phenomenon, shifted identical bands (SIB). SIBs are yrast bands in neighboring nuclei (a, b) with moments of inertia which are identical when shifted by a constant amount κ, so J 1a (1 + κ) = J 1b , from 2 + to 8 + and higher to 16 + . Out of over 700 comparisons, 55 SIBs were found from stable to the most neutron-rich Ce-W nuclei with |κ-bar| between 1.5% and 13%, where the spread in κ is less than ± 1%, and only four identical bands (κ-bar congruent with 0). As examples, we found for 158 Sm- 160 Gd, κ-bar (-3.2 +0.1 -0.2 )% (where the ± is the total spread in κ from -3.1 to -3.4); 156 Nd- 160 Gd, (-10.6 +0.4 -0.2 )%; 158 Sm- 160 Sm, (3.4 +0.5 -0.3 )%. The J 1 values were fitted to a variable moment of inertia model with parameters J 0 and C whose values correlate with the SIB J 1 values. The SIBs are not correlated either with deformation or with the N p N n product of the IBA model

  17. Weight-based discrimination: an ubiquitary phenomenon?

    Science.gov (United States)

    Sikorski, C; Spahlholz, J; Hartlev, M; Riedel-Heller, S G

    2016-02-01

    Despite strong indications of a high prevalence of weight-related stigmatization in individuals with obesity, limited attention has been given to the role of weight discrimination in examining the stigma obesity. Studies, up to date, rely on a limited basis of data sets and additional studies are needed to confirm the findings of previous studies. In particular, data for Europe are lacking, and are needed in light of a recent ruling of the European Court of Justice that addressed weight-based discrimination. The data were derived from a large representative telephone survey in Germany (n=3003). The dependent variable, weight-based discrimination, was assessed with a one-item question. The lifetime prevalence of weight discrimination across different sociodemographic variables was determined. Logistic regression models were used to assess the association of independent and dependent variables. A sub-group analysis was conducted analyzing all participants with a body mass index ⩾25 kg m(-)(2). The overall prevalence of weight-based discrimination was 7.3%. Large differences, however, were observed regarding weight status. In normal weight and overweight participants the prevalence was 5.6%, but this number doubled in participants with obesity class I (10.2%), and quadrupled in participants with obesity class II (18.7%) and underweight (19.7%). In participants with obesity class III, every third participant reported accounts of weight-based discrimination (38%). In regression models, after adjustment, the associations of weight status and female gender (odds ratio: 2.59, PDiscrimination seems to be an ubiquitary phenomenon at least for some groups that are at special risk, such as heavier individuals and women. Our findings therefore emphasize the need for research and intervention on weight discrimination among adults with obesity, including anti-discrimination legislation.

  18. The Trump phenomenon: An explanation from sociophysics

    Science.gov (United States)

    Galam, Serge

    2017-04-01

    The Trump phenomenon is argued to depart from current populist rise in Europe. According to a model of opinion dynamics from sociophysics the machinery of Trump’s amazing success obeys well-defined counter-intuitive rules. Therefore, his success was in principle predictable from the start. The model uses local majority rule arguments and obeys a threshold dynamics. The associated tipping points are found to depend on the leading collective beliefs, cognitive biases and prejudices of the social group which undertakes the public debate. And here comes the open sesame of the Trump campaign, which develops along two successive steps. During a first moment, Trump’s statement produces a majority of voters against him. But at the same time, according to the model the shocking character of the statement modifies the prejudice balance. In case the prejudice is present even being frozen among voters, the tipping point is lowered at Trump’s benefit. Nevertheless, although the tipping point has been lowered by the activation of frozen prejudices it is instrumental to preserve enough support from openly prejudiced people to be above the threshold. Then, as infuriated voters launch intense debate, occurrence of ties will drive progressively hostile people to shift their voting intention without needing to endorse the statement which has infuriated them. The ongoing debate does drive towards a majority for Trump. The possible Trump victory at November Presidential election is discussed. In particular, the model shows that to eventually win the Presidential election, Trump must not modify his past shocking attitude but to appeal to a different spectrum of frozen prejudices, which are common to both Democrats and Republicans.

  19. Coral bleaching at Little Cayman, Cayman Islands 2009

    Science.gov (United States)

    van Hooidonk, Ruben J.; Manzello, Derek P.; Moye, Jessica; Brandt, Marilyn E.; Hendee, James C.; McCoy, Croy; Manfrino, Carrie

    2012-06-01

    The global rise in sea temperature through anthropogenic climate change is affecting coral reef ecosystems through a phenomenon known as coral bleaching; that is, the whitening of corals due to the loss of the symbiotic zooxanthellae which impart corals with their characteristic vivid coloration. We describe aspects of the most prevalent episode of coral bleaching ever recorded at Little Cayman, Cayman Islands, during the fall of 2009. The most susceptible corals were found to be, in order, Siderastrea siderea, Montastraea annularis, and Montastraea faveolata, while Diplora strigosa and Agaricia spp. were less so, yet still showed considerable bleaching prevalence and severity. Those found to be least susceptible were Porites porites, Porites astreoides, and Montastraea cavernosa. These observations and other reported observations of coral bleaching, together with 29 years (1982-2010) of satellite-derived sea surface temperatures, were used to optimize bleaching predictions at this location. To do this a Degree Heating Weeks (DHW) and Peirce Skill Score (PSS) analysis was employed to calculate a local bleaching threshold above which bleaching was expected to occur. A threshold of 4.2 DHW had the highest skill, with a PSS of 0.70. The method outlined here could be applied to other regions to find the optimal bleaching threshold and improve bleaching predictions.

  20. Pre-glow phenomenon origin and its scaling for ECRIS

    International Nuclear Information System (INIS)

    Izotov, I.; Sidorov, A.; Skalyga, V.; Zorin, V.

    2012-01-01

    Pre-glow is the multi-charged ion current burst that may occur at the beginning of the beam pulse. Pre-glow effect investigation is one of topical directions of ECR ion sources development at present. Pre-glow is of interest for efficient short-pulsed multicharged ion source creation. Particularly, such source of intense beams of short living radioactive isotopes multi-charged ions is one of key elements in 'Beta-Beam' European project. The use of Pre-glow-generating regime of an ECRIS operation is a promising way of pulsed high-intense multi-charged ion beams production with much shorter edges in comparison with usual operation regime. Numerical simulations made with the updated theoretical model allow authors to propose more physical and intuitive explanations of Pre-glow phenomenon origins. The obtained dependences of Pre-glow characteristics on experimental conditions offer a scaling for a wide range of ECRIS. The propose scaling demonstrates that an ECR source with plasma heating by radiation at frequency of 37 GHz and higher seems to be the most effective in terms of currents, pre-glow intensity and mean ion charge. The paper is followed by the slides of the presentation

  1. Specific heat, polarization and heat conduction in microwave heating systems: A nonequilibrium thermodynamic point of view

    International Nuclear Information System (INIS)

    Bergese, Paolo

    2006-01-01

    A microwave (MW) field can induce in a dielectric material an oscillatory polarization. By this mechanism part of the energy carried by the waves is converted into chaotic agitation, and the material heats up. MW heating is a nonequilibrium phenomenon, while conventional heating can generally be considered as quasi-static. Excess (or nonthermal) effects of MWs with respect to conventional heating lie in this difference. Macroscopically, MW heating can be described in the framework of linear nonequilibrium thermodynamics (NET). This approach indicates that in a dielectric material under MW heating the specific heat has a dynamic component linked to the variation of polarization with temperature, and that polarization and heat conduction are intertwined. In particular, linear NET provides a new phenomenological equation for heat conduction that is composed of the classic Fourier's law and an additional term due to polarization relaxation. This term quantitatively describes the excess effect of MWs on thermal conduction

  2. Surface thermal analysis of North Brabant cities and neighbourhoods during heat waves

    Directory of Open Access Journals (Sweden)

    Leyre Echevarria Icaza

    2016-03-01

    Full Text Available The urban heat island effect is often associated with large metropolises. However, in the Netherlands even small cities will be affected by the phenomenon in the future (Hove et al., 2011, due to the dispersed or mosaic urbanisation patterns in particularly the southern part of the country: the province of North Brabant. This study analyses the average night time land surface temperature (LST of 21 North-Brabant urban areas through 22 satellite images retrieved by Modis 11A1 during the 2006 heat wave and uses Landsat 5 Thematic Mapper to map albedo and normalized difference temperature index (NDVI values. Albedo, NDVI and imperviousness are found to play the most relevant role in the increase of night-time LST. The surface cover cluster analysis of these three parameters reveals that the 12 “urban living environment” categories used in the region of North Brabant can actually be reduced to 7 categories, which simplifies the design guidelines to improve the surface thermal behaviour of the different neighbourhoods thus reducing the Urban Heat Island (UHI effect in existing medium size cities and future developments adjacent to those cities.

  3. Fine scale monitoring of ice ablation following convective heat transfer: case study based on ice-wedge thermo-erosion on Bylot Island (Canadian High Arctic) and laboratory observations

    Science.gov (United States)

    Godin, E.; Fortier, D.

    2011-12-01

    Thermo-erosion gullies often develop in ice-wedge polygons terrace and contribute to the dynamic evolution of the periglacial landscape. When snowmelt surface run-off concentrated into streams and water tracks infiltrate frost cracks, advective heat flow and convective thermal transfer from water to the ice-wedge ice enable the rapid development of tunnels and gullies in the permafrost (Fortier et al. 2007). Fine scale monitoring of the physical interaction between flowing water and ice rich permafrost had already been studied in a context of thermal erosion of a large river banks in Russia (Costard et al. 2003). Ice wedge polygons thermo-erosion process leading to gullying remains to be physically modelled and quantified. The present paper focus on the fine scale monitoring of thermo-erosion physical parameters both in the field and in laboratory. The physical model in laboratory was elaborated using a fixed block of ice monitored by a linear voltage differential transducer (LVDT) and temperature sensors connected to a logger. A water container with controlled discharge and temperature provided the fluid which flowed over the ice through a hose. Water discharge (Q), water temperature (Tw), ice melting temperature (Ti) and ice ablation rate (Ar) were measured. In laboratory, water at 281 Kelvin (K) flowing on the ice (Ti 273 K) made the ice melt at a rate Ar of 0.002 m min-1, under a continuous discharge of ≈ 8 x 10-7 m3 s-1. In the field, a small channel was dug between a stream and an exposed ice-wedge in a pre-existing active gully, where in 2010 large quantities of near zero snowmelt run-off water contributed to several meters of ice wedge ablation and gully development. Screws were fastened into the ice and a ruler was used to measure the ablation rate every minute. The surface temperature of the ice wedge was monitored with thermocouples connected to a logger to obtain the condition of the ice boundary layer. Discharge and water temperature were measured in

  4. Neoclassical islands on COMPASS-D

    International Nuclear Information System (INIS)

    Gates, D.A.; Lloyd, B.; Morris, A.W.; McArdle, G.; O'Brien, M.R.; Valovic, M.; Warrick, C.D.; Wilson, H.R.

    1997-01-01

    Neoclassical magnetic islands are observed to limit the achievable β in COMPASS-D low collisionality single null divertor tokamak plasmas with ITER-like geometry (R 0 = 0.56 m, B 0 1.2 T, I p = 120-180 kA, κ = 1.6, ε = 0.3). The limiting β is typically well below that expected from ideal instabilities with maximum βN in the range of 1.6 to 2.1. The plasma is heated with up to 1.8 MW of 60 GHz electron cyclotron resonance heating (ECRH) at the second harmonic with X mode polarization. The time history of the measured island width is compared with the predictions of neoclassical tearing mode theory, with good agreement between theory and experiment. The measured islands have a threshold width below which the mode will not grow. The density scaling of the point of onset of the measured instabilities is compared with two theories that predict a threshold island width for the onset of neoclassical tearing modes. Applied resonant helical error fields are used to induce islands in collisionality regimes wherein the neoclassical islands do not occur naturally, allowing the study of the behaviour of neoclassical tearing modes in this regime. The critical β for the onset of neoclassical tearing modes is seen to be ∼3 times higher in the naturally stable region. This observation is compared with the predictions of both threshold theories. A simple expression for the q scaling of the maximum achievable β N in the presence of neoclassical tearing modes is derived on the basis of the assumption of a maximum allowable island width. The predicted q scaling of this β limit is compared with data from a q scan, and the results are in good agreement. (author)

  5. Powerful Radio Burst Indicates New Astronomical Phenomenon

    Science.gov (United States)

    2007-09-01

    Astronomers studying archival data from an Australian radio telescope have discovered a powerful, short-lived burst of radio waves that they say indicates an entirely new type of astronomical phenomenon. Region of Strong Radio Burst Visible-light (negative greyscale) and radio (contours) image of Small Magellanic Cloud and area where burst originated. CREDIT: Lorimer et al., NRAO/AUI/NSF Click on image for high-resolution file ( 114 KB) "This burst appears to have originated from the distant Universe and may have been produced by an exotic event such as the collision of two neutron stars or the death throes of an evaporating black hole," said Duncan Lorimer, Assistant Professor of Physics at West Virginia University (WVU) and the National Radio Astronomy Observatory (NRAO). The research team led by Lorimer consists of Matthew Bailes of Swinburne University in Australia, Maura McLaughlin of WVU and NRAO, David Narkevic of WVU, and Fronefield Crawford of Franklin and Marshall College in Lancaster, Pennsylvania. The astronomers announced their findings in the September 27 issue of the online journal Science Express. The startling discovery came as WVU undergraduate student David Narkevic re-analyzed data from observations of the Small Magellanic Cloud made by the 210-foot Parkes radio telescope in Australia. The data came from a survey of the Magellanic Clouds that included 480 hours of observations. "This survey had sought to discover new pulsars, and the data already had been searched for the type of pulsating signals they produce," Lorimer said. "We re-examined the data, looking for bursts that, unlike the usual ones from pulsars, are not periodic," he added. The survey had covered the Magellanic Clouds, a pair of small galaxies in orbit around our own Milky Way Galaxy. Some 200,000 light-years from Earth, the Magellanic Clouds are prominent features in the Southern sky. Ironically, the new discovery is not part of these galaxies, but rather is much more distant

  6. Energy Transition Initiative, Island Energy Snapshot - Bahamas (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2015-02-01

    This profile provides a snapshot of the electricity generation or reduction technologies, including solar hot water heating, available to the Commonwealth of the Bahamas - a country consisting of more than 700 islands, cays, and islets - of which only 30 are actually inhabited. Heating and transportation fuels are not addressed.

  7. Energy Transition Initiative, Island Energy Snapshot - Turks & Caicos (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2015-02-01

    This profile presents a snapshot of the electricity generation and reduction technologies, including solar hot water heating, available to Turks and Caicos - a British overseas territory consisting of two groups of islands located southeast of the Bahamas. Heating and transportation fuels are not addressed.

  8. Energy Transition Initiative: Island Energy Snapshot - St. Lucia (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2015-02-01

    This profile provides a snapshot of the electricity generation or reduction technologies, including solar hot water heating, available to Saint Lucia, one of six Caribbean countries that make up the Windward Islands - the southern arc of the Lesser Antilles chain - at the eastern end of the Caribbean Sea. Heating and transportation fuels are not addressed.

  9. Paradise Islands? Island States and Environmental Performance

    Directory of Open Access Journals (Sweden)

    Sverker C. Jagers

    2016-03-01

    Full Text Available Island states have been shown to outperform continental states on a number of large-scale coordination-related outcomes, such as levels of democracy and institutional quality. The argument developed and tested in this article contends that the same kind of logic may apply to islands’ environmental performance, too. However, the empirical analysis shows mixed results. Among the 105 environmental outcomes that we analyzed, being an island only has a positive impact on 20 of them. For example, island states tend to outcompete continental states with respect to several indicators related to water quality but not in aspects related to biodiversity, protected areas, or environmental regulations. In addition, the causal factors previously suggested to make islands outperform continental states in terms of coordination have weak explanatory power in predicting islands’ environmental performance. We conclude the paper by discussing how these interesting findings can be further explored.

  10. Heat pumps: heat recovery

    Energy Technology Data Exchange (ETDEWEB)

    Pielke, R

    1976-01-01

    The author firstly explains in a general manner the functioning of the heat pump. Following a brief look at the future heat demand and the possibilities of covering it, the various methods of obtaining energy (making use of solar energy, ground heat, and others) and the practical applications (office heating, swimming pool heating etc.) are explained. The author still sees considerable difficulties in using the heat pump at present on a large scale. Firstly there is not enough maintenance personnel available, secondly the electricity supply undertakings cannot provide the necessary electricity on a wide basis without considerable investments. Other possibilities to save energy or to use waste energy are at present easier and more economical to realize. Recuperative and regenerative systems are described.

  11. Moe fenomen. The Phenomenon of Fashion

    Directory of Open Access Journals (Sweden)

    Ines Piibeleht

    2012-06-01

    Full Text Available Since the last quarter of the 20th century, particularly after the “cultural turn”, the interest in fashion has been increasing in a variety of different disciplines. Fashion has begun to be investigated in many different contexts, using new theoretical approaches. Fashion can be regarded as a social phenomenon, a sign system, as art, myth, or the product of the fashion industry. The purpose of this article is not to provide a definition of fashion, but rather to raise the question of how to approach the experience of fashion analytically. The methodological issues discussed here emerged in the course of preparing for empirical research on fashion. The observations and comparisons that constitute the core of this article are the result of efforts to juxtapose different methods. The traditional history of fashion used a historical-epistemological strategy but, depending on how one defines culture, the meaning of fashion can also be analysed using methods based on different epistemological strategies. The phenomenological method elaborated by Edmund Husserl, which I have chosen for my analysis of the experience of fashion, defines culture through the experiential acts of individuals. Simply stated, phenomenology considers the world as it is given to us in our consciousness. What is most important for empirical research is that the phenomenological method makes it possible to study the structure of a concrete experience and to focus on the mechanisms of the subjective creation of meaning. Thus this article has two main foci: a theoretical analysis of how the experience of fashion can be analytically revealed using the phenomenological method, and a comparison of the phenomenological approach with methods based on other strategies. The analysis of descriptions in the first person makes it possible to highlight how experience has been constructed. People “see” fashion based on structures of meaning; when they describe their own experience

  12. The Effects of Heat Advection on UK Weather and Climate Observations in the Vicinity of Small Urbanized Areas

    Science.gov (United States)

    Bassett, Richard; Cai, Xiaoming; Chapman, Lee; Heaviside, Clare; Thornes, John E.

    2017-10-01

    Weather and climate networks traditionally follow rigorous siting guidelines, with individual stations located away from frost hollows, trees or urban areas. However, the diverse nature of the UK landscape suggests that the feasibility of siting stations that are truly representative of regional climate and free from distorting local effects is increasingly difficult. Whilst the urban heat island is a well-studied phenomenon and usually accounted for, the effect of warm urban air advected downwind is rarely considered, particularly at rural stations adjacent to urban areas. Until recently, urban heat advection (UHA) was viewed as an urban boundary-layer process through the formation of an urban plume that rises above the surface as it is advected. However, these dynamic UHA effects are shown to also have an impact on surface observations. Results show a significant difference in temperatures anomalies (p careful interpretation of long-term temperature data taken near small urban areas.

  13. Socio-Spatial Typology In Karanrang Island

    Directory of Open Access Journals (Sweden)

    Amin Ishak Rahmi

    2018-01-01

    Full Text Available The phenomenon of community life on the small island is influenced by the stimulating factor of harmonious social interaction system through cooperation, kinship, economic activity, children playing, transportation system, religion and other social activities. The social dynamics of small island communities appear in the layout and environment in which they live, how they manage and utilize space, both indoors and outdoors. The purpose of this paper is to describe the socio-spatial typology of settlements on Karanrang Island, including a description of the spatial pattern of communalenvironments. Research approaches through spatial similarities and differences in the classification of behavioral setting, including physical, non-physical, socio-spatial arrangements. Karanrang Island as a research focus which has an area of 7.8 Ha is one of small islands inhabited in cluster PangkajeneIslands (Pangkep South Sulawesi, with characteristic of dense settlement, and diversity of tribe, also inhabited by 434 families. The method of this research is observation, data collection through field survey with descriptive analysis based on empirical data on meso / environment which is divided into:1 inter building space; 2 Space in the building; 3 Open space, and; 4 Environmental facilities. The results showed that classification of socio-spatial typology of communal environment is divided into four types of socio-spatial models based on the configuration of social interaction activities, namely:1 Type of Linear Centripetal, at the inter buildings space; 2 Type of Centripetal Cluster, space on the building; 3 Type of Centrifugal Cluster, at green open space/field; 4 Type of cluster Centripetal, at environmental facilities. The socio-spatial type based on actor’s activities, occupancy, and territory, can be distinguished on: 1 Type of children’s activity; 2 Type of mother’sactivity; 3 Type of father’s activity, and 4 Type of combination activity.

  14. Tanzania - Mafia Island Airport

    Data.gov (United States)

    Millennium Challenge Corporation — The evaluation design and subsequent data gathering activities will address the following key research questions: a) Has the Mafia Island Airport Upgrade Project...

  15. An investigation for identification of factors governing F and P phenomenon

    International Nuclear Information System (INIS)

    Ray, M.K.S.; Saini, R.D.; Kutty, K.K.; Das, D.

    1992-01-01

    A series of experiments were carried out in divided electrolytic cells in an attempt to identify factors governing the occurence of Fleischmann and Pons (F and P) phenomenon. Despite wide variation in operating parameters (cathode characteristics, type and concentration of electrolyte) and perturbation of deuterated cathodes and sharp change in their temperatures, experiments yielded no evidence of the phenomenon even though high loading (sometimes upto D/Pd ∼2) could be achieved repeatedely. However, large excess heat liberation, not accountable by probable physicochemical processes, was observed following perturbation of the state of equilibrium of a deuterated cathode (having a portion of it free of scale and bright in appearance) by air. Instances of anomalies in tritium distribution between gas and liquid phase resulting from such perturbation were also noticed. These observations, when analysed in global perspective, clearly indicate the essentiality of oxygen and scale free surface for occurrence of the phenomenon. Study of desorption dynamics and related parameters revealed that the overall effect of oxygen is to enhance the escaping tendency of deuterium from Pd lattice and that the phenomenon is in someway related to desorption. Significant increase in tritium activity in gas phase observed following repeated perturbation of deuterated cathode by induced pulsed magnetic field is suggestive of a possible mechanism in which strong electron affinity of oxygen is of paramount importance. (author). 53 refs., 17 figs., 3 tabs., 4 appendixes

  16. El Nino phenomenon, effects on the tree of coffee

    International Nuclear Information System (INIS)

    Jaramillo Robledo, Alvaro; Baldion Rincon, Jose Vicente; Guzman Martinez, Orlando

    1998-01-01

    El Nino phenomenon is manifested in the coffee by a deficiency of water in the plant, that which affects its normal development in its fruits; the author describes other alterations that affect the plants of coffee due to El Nino phenomenon

  17. Chinchirisi: The Phenomenon of "Spirit Children" Among the ...

    African Journals Online (AJOL)

    ... what others say or do, 'it is in our blood', they say. This raises concerns. In what ways and to what extent is this religio-cultural phenomenon a challenge to euthanasia, human rights and rural development in the contemporary society? This paper examines the phenomenon of 'spirit children' from an insider perspective.

  18. An Evaluation of the 'New History' Phenomenon | Moyo | Zimbabwe ...

    African Journals Online (AJOL)

    The purpose of this article was to evaluate the 'New History' approach. This paper explores the argument that the new 'New History' phenomenon was an attempt to rejuvenate an interest in History. The 'New History' phenomenon was launched because of the fear that History was in danger as it faced possible extinction ...

  19. Phenomenon of isomorphic provoking responses in cases of limited scleroderma

    Directory of Open Access Journals (Sweden)

    Talnikova Е.Е.

    2015-09-01

    Full Text Available The article presents the historical origin of the term "Koebner phenomenon". The literature data reflect the etiology, pathogenesis and epidemiology of isomorphic mechanisms provoking responses in lichen planus, psoriasis, scleroder-ma, syphilis. Variants of the Koebner phenomenon's classifications are given. The clinical cases of limited scleroderma after mechanical injury are described.

  20. Can people with Raynaud's phenomenon travel to high altitude?

    Science.gov (United States)

    Luks, Andrew M; Grissom, Colin K; Jean, Dominique; Swenson, Erik R

    2009-01-01

    To determine whether high altitude travel adversely affects mountain enthusiasts with Raynaud's phenomenon. Volunteers with Raynaud's phenomenon were recruited using announcements disseminated by organizations dedicated to climbing or wilderness travel and Internet discussion boards dedicated to mountain activities to complete an online, anonymous survey. Survey questions addressed demographic variables, aspects of their Raynaud's phenomenon, and features of their mountain activities. Respondents compared experiences with Raynaud's phenomenon between high (>2440 m; 8000 feet) and low elevations and rated agreement with statements concerning their disease and the effects of high altitude. One hundred forty-two people, 98% of whom had primary Raynaud's phenomenon, completed the questionnaire. Respondents spent 5 to 7 days per month at elevations above 2440 m and engaged in 5.4 +/- 2.0 different activities. Eighty-nine percent of respondents engaged in winter sports and only 22% reported changing their mountain activities because of Raynaud's phenomenon. Respondents reported a variety of tactics to prevent and treat Raynaud's attacks, but only 12% used prophylactic medications. Fifteen percent of respondents reported an episode of frostbite following a Raynaud's phenomenon attack at high altitude. There was considerable heterogeneity in participants' perceptions of the frequency, duration, and severity of attacks at high altitude compared to their home elevation. Motivated individuals with primary Raynaud's phenomenon, employing various prevention and treatment strategies, can engage in different activities, including winter sports, at altitudes above 2440 m. Frostbite may be common in this population at high altitude, and care must be taken to prevent its occurrence.

  1. Heat pipe heat storage performance

    Energy Technology Data Exchange (ETDEWEB)

    Caruso, A; Pasquetti, R [Univ. de Provence, Marseille (FR). Inst. Universitaire des Systemes; Grakovich, L P; Vasiliev, L L [A.V. Luikov Heat and Mass Transfer Inst. of the BSSR, Academy of Sciences, Minsk (BY)

    1989-01-01

    Heat storage offers essential thermal energy saving for heating. A ground heat store equipped with heat pipes connecting it with a heat source and to the user is considered in this paper. It has been shown that such a heat exchanging system along with a batch energy source meets, to a considerable extent, house heating requirements. (author).

  2. Heat transfer

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Heat transfer. Heat conduction in solid slab. Convective heat transfer. Non-linear temperature. variation due to flow. HEAT FLUX AT SURFACE. conduction/diffusion.

  3. Heat Waves

    Science.gov (United States)

    Heat Waves Dangers we face during periods of very high temperatures include: Heat cramps: These are muscular pains and spasms due ... that the body is having trouble with the heat. If a heat wave is predicted or happening… - ...

  4. Inherent safety phenomenon of fission-gas induced axial extrusion in oxide and metal fueled LMFBRs

    International Nuclear Information System (INIS)

    Miles, K.J.; Kalimullah.

    1985-01-01

    The current emphasis in LMFBR design is to develop reactor systems that contain as many features as possible to limit the severity of hypothetical accidents and provide the maximum time before corrective action is required while maintaining low capital costs. One feature is the possibility of fission-gas induced axial extrusion of the fuel within the intact cladding. The potential exists for this phenomenon to enable the reactor to withstand most accidents of the TOP variety, or at least provide an extended time for corrective action to be taken. Under transient conditions which produce a heating of the fuel above its nominal operating temperature, thermal expansion of the material axially produces a negative reactivity effect. This effect is presently considered in most accident analysis codes. The phenomenon of fission-gas induced axial extrusion has received renewed interest because of the consideration of metal alloys of uranium and plutonium for the fuel in some current reactor designs

  5. The phenomenon of domestic servants in the State of Qatar

    OpenAIRE

    Alshafai, Nedham

    2015-01-01

    Of new phenomena that emerged in the State of Qatar, and on a large scale in the post-oil era (after 1950) is domestic servant's phenomenon. Historically, the phenomenon was presented in the pre-oil and limited to the homes of the royal families, pearls' merchants, senior traders and tribal leaders. However, today the phenomenon exists in all Qatari families, under the name of maids, drivers, educators, nurses and others, recently; it began spreading in non-citizenship families as well. Base...

  6. Theoretical aspects on the phenomenon of contamination of ground waters

    International Nuclear Information System (INIS)

    Echeverri, G.E.

    1998-01-01

    The phenomenon of contamination of ground waters and the destination of certain constituents of the water keep in mind diverse mechanisms of physical nature, chemistry and biological; in this work it is consigned in a concise way, the theoretical aspects of these topics, that is to say, the basic principles of the ground water hydraulics, the fundamental concepts of the physics of the movement and the chemistry of the ground water, as well as the equations that govern the phenomenon of contamination of the mass of water contained in the interstices of the floors and the rocks, broadly used in the mathematical modeling of the phenomenon

  7. Urban Heat Wave Hazard Assessment

    Science.gov (United States)

    Quattrochi, Dale A.; Jedlovec, Gary; Meyer, Paul J.; LaFontaine, Frank J.; Crane, Dakota L.

    2016-01-01

    Heat waves are the largest cause of environment-related deaths globally. On average, over 6,000 people in the United States alone are hospitalized each summer due to excessive heat. Key elements leading to these disasters are elevated humidity and the urban heat island effect, which act together to increase apparent temperature and amplify the effects of a heat wave. Urban demographics and socioeconomic factors also play a role in determining individual risk. Currently, advisories of impending heat waves are often too generalized, with limited or no spatial variability over urban regions. This frequently contributes to a lack of specific response on behalf of the population. A goal of this project is to develop a product that has the potential to provide more specific heat wave guidance invoking greater awareness and action.

  8. Determination of Ground Heat Exchangers Temperature Field in Geothermal Heat Pumps

    Science.gov (United States)

    Zhurmilova, I.; Shtym, A.

    2017-11-01

    For the heating and cooling supply of buildings and constructions geothermal heat pumps using low-potential ground energy are applied by means of ground exchangers. The process of heat transfer in a system of ground exchangers is a phenomenon of complex heat transfer. The paper presents a mathematical modeling of heat exchange processes, the temperature fields are built which are necessary for the determination of the ground array that ensures an adequate supply of low potential energy excluding the freezing of soil around the pipes in the ground heat exchangers and guaranteeing a reliable operation of geothermal heat pumps.

  9. A glance on the glass-transition phenomenon from the viewpoint of devitrification

    International Nuclear Information System (INIS)

    Louzguine-Luzgin, Dmitri V.; Inoue, Akihisa

    2007-01-01

    The formation of a supercooled liquid region and devitrification behaviour of metallic glasses on heating are discussed in relation with the glass-transition phenomenon observed using differential scanning and isothermal calorimetries as well as X-ray diffraction and transmission electron microscopy (TEM). One of the most clear sequences of the glassy ↔ supercooled liquid phase transition is the change of the devitrification behaviour and the kinetics of the devitrification reaction in Al-based and some other alloys after the transition from the glassy to the supercooled liquid state. The significant variation in the devitrification behaviour and thermodynamic parameters indicate the difference between the glassy and the supercooled liquid phases

  10. APPLICATION OF THE ANOMIC THEORY ON THE PHENOMENON ...

    African Journals Online (AJOL)

    GRACE

    public service is the most potent organ for the implementation of the policies .... To what extent does the anomic theory explain the social phenomenon of ..... This tends to agree with Merton's postulation that innovation in particular is a.

  11. Various manifestations of stratification phenomenon during intravenous cholangiography

    Energy Technology Data Exchange (ETDEWEB)

    Tada, S; Nanjo, M; Kino, M; Sekiya, T; Harada, J; Kuroda, T; Anno, I [Jikei Univ., Tokyo (Japan). School of Medicine

    1979-07-01

    A classification has been made of various types of stratification phenomenon during intravenous cholangiography. The stage of gallbladder opacification in the recumbent position has been classified as (I) mottled, (II) dendritic, (III) ring-like, and (IV) homogeneous. 'Dendritic' type of stratification phenomenon has never been reported in the literature to our knowledge. At 20 min following infusion of contrast material homogeneous opacification of the gallbladder was noticed in only 14% of patients. The others fell into types I, II or III of stratification phenomenon. In contrast, 87% of the opacified gallbladders were homogeneous on the after fatty meal film. It is therefore mandatory for diagnosis that either a 24 h film or a fatty meal film be taken to avoid the stratification phenomenon.

  12. Various manifestations of stratification phenomenon during intravenous cholangiography

    International Nuclear Information System (INIS)

    Tada, S.; Nanjo, M.; Kino, M.; Sekiya, T.; Harada, J.; Kuroda, T.; Anno, I.

    1979-01-01

    A classification has been made of various types of stratification phenomenon during intravenous cholangiography. The stage of gallbladder opacification in the recumbent position has been classified as (I) mottled, (II) dendritic, (III) ring-like, and (IV) homogeneous. 'Dendritic' type of stratification phenomenon has never been reported in the literature to our knowledge. At 20 min following infusion of contrast material homogeneous opacification of the gallbladder was noticed in only 14% of patients. The others fell into types I, II or III of stratification phenomenon. In contrast, 87% of the opacified gallbladders were homogeneous on the after fatty meal film. It is therefore mandatory for diagnosis that either a 24 h film or a fatty meal film be taken to avoid the stratification phenomenon. (author)

  13. Curvature Effect and the Spectral Softening Phenomenon Detected ...

    Indian Academy of Sciences (India)

    soft spectral evolution, indicating that this spectral softening is not a rare phenomenon .... of time, there exists a temporal steep decay phase accompanied by spectral softening. (d) In most cases, the temporal power law index α and the spectral.

  14. Rock’n’Roll as a Local Musical Phenomenon

    Directory of Open Access Journals (Sweden)

    Marija Ristivojević

    2016-02-01

    Full Text Available The paper considers the process of localization of a pop cultural and musical phenomenon – rock ’n’ roll. My basic premise is that rock ’n’ roll as a global music genre can be perceived as local, and hence represents a recognizable identification element for the local population. In this case the label r ’n’ r pertain to the phenomenon of Belgrade "new wave" music, which was popular during the 1980’s. Based on the analysis of narratives from relevant documentary films, it is my intention to find out whether "new wave" was initially perceived as a local phenomenon, and what the means of constructing this image are, as well as what it is that gives this phenomenon local legitimacy and credibility.

  15. Radical Right and Radical Left Euroscepticism. A Dynamic Phenomenon

    NARCIS (Netherlands)

    Meijers, M.J.

    2017-01-01

    Euroscepticism is often regarded as a monolithic, unitary political phenomenon. After all, Eurosceptic parties, movements and voters are united in voicing their opposition to European integration. This, however, is a serious misconception: Eurosceptic politics in Western Europe is heterogeneous

  16. Negative luminescence and devices based on this phenomenon

    International Nuclear Information System (INIS)

    Ivanov-Omskii, V. I.; Matveev, B. A.

    2007-01-01

    Recent publications concerned with infrared emitters whose electrical modulation results in absorption of radiation detected as negative luminescence are reviewed. The main properties of the devices based on this phenomenon are analyzed

  17. Negative luminescence and devices based on this phenomenon

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov-Omskii, V I; Matveev, B. A. [Russian Academy of Sciences, Ioffe Physicotechnical Institute (Russian Federation)], E-mail: bmat@iropt3.ioffe.rssi.ru

    2007-03-15

    Recent publications concerned with infrared emitters whose electrical modulation results in absorption of radiation detected as negative luminescence are reviewed. The main properties of the devices based on this phenomenon are analyzed.

  18. Glow phenomenon surrounding the vertical stabilizer and OMS pods

    Science.gov (United States)

    1994-01-01

    This 35mm frame, photographed as the Space Shuttle Columbia was orbiting Earth during a 'night' pass, documents the glow phenomenon surrounding the vertical stabilizer and the Orbital Maneuvering System (OMS) pods of the spacecraft.

  19. Heat exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, E L; Eisenmann, G; Hahne, E [Stuttgart Univ. (TH) (F.R. Germany). Inst. fuer Thermodynamik und Waermetechnik

    1976-04-01

    A survey is presented on publications on design, heat transfer, form factors, free convection, evaporation processes, cooling towers, condensation, annular gap, cross-flowed cylinders, axial flow through a bundle of tubes, roughnesses, convective heat transfer, loss of pressure, radiative heat transfer, finned surfaces, spiral heat exchangers, curved pipes, regeneraters, heat pipes, heat carriers, scaling, heat recovery systems, materials selection, strength calculation, control, instabilities, automation of circuits, operational problems and optimization.

  20. Tourism Development and the ‘Hidden’ Phenomenon

    Directory of Open Access Journals (Sweden)

    Vincenzo ASERO

    2009-01-01

    Full Text Available This paper focus on ‘hidden’ tourism phenomenon, that is the touristdemand that in many destinations eludes the official survey system. Estimationof hidden tourism requires information drawn from tourism demand and supply,using different indicators. The critical points are: the availability and validity ofdata, the data collection time and the application of the analysis models todifferent non-homogeneous areas. Economic value of the phenomenon relies onan estimate of consumption.

  1. Specific heats of degenerate ideal gases

    OpenAIRE

    Caruso, Francisco; Oguri, Vitor; Silveira, Felipe

    2017-01-01

    From arguments based on Heisenberg's uncertainty principle and Pauli's exclusion principle, the molar specific heats of degenerate ideal gases at low temperatures are estimated, giving rise to values consistent with the Nerst-Planck Principle (third law of Thermodynamics). The Bose-Einstein condensation phenomenon based on the behavior of specific heat of massive and non-relativistic boson gases is also presented.

  2. Vancouver Island gas supply

    International Nuclear Information System (INIS)

    Des Brisay, C.

    2005-01-01

    Terasen Gas is pursuing alternatives for the supply of additional natural gas capacity to Vancouver Island. Its subsidiary, Terasen Gas (Vancouver Island) Inc. (TGVI), is responding to the need for delivery of increased gas supply and, is supporting plans for new gas-fired power generation on Vancouver Island. TGVI's proposal for new natural gas capacity involves a combination of compression and pipeline loops as well as the addition of a storage facility for liquefied natural gas (LNG) at Mt. Hayes to help manage price volatility. This presentation outlined the objectives and components of the resource planning process, including demand forecast scenarios and the preferred infrastructure options. tabs., figs

  3. The Diagnostic Value of the Vacuum Phenomenon during Hip Arthroscopy

    Science.gov (United States)

    Rath, Ehud; Gortzak, Yair; Schwarzkopf, Ran; Benkovich, Vadim; Cohen, Eugene; Atar, Dan

    2011-01-01

    The diagnostic value of the vacuum phenomenon between the femoral head and the acetabulum, and time frame of its occurrence after application of traction is an important clinical question. The resulting arthrogram may outline the shape, location, and extent of cartilage lesions prior to arthroscopy of the hip joint. The presence, duration, and diagnostic information of the vacuum phenomenon were evaluated in 24 hips that underwent arthroscopy. The operative diagnosis was compared to the results of imaging studies and to findings obtained during a traction trial prior to arthroscopy. Indications for arthroscopy included avascular necrosis, labral tears, loose bodies, osteoarthrosis, and intractable hip pain. In 22 hips the vacuum phenomenon developed within 30 seconds after application of traction. The most important data obtained from the vacuum phenomenon was the location and extent of femoral head articular cartilage detachment and the presence of nonossified loose bodies. The vacuum phenomenon did not reveal labral or acetabular cartilage pathology in any of these patients. The vacuum phenomenon obtained during the trial of traction can add valuable information prior to hip arthroscopy. Femoral head articular cartilage detachment was best documented by this method. The hip arthroscopist should utilize this diagnostic window routinely prior to hip arthroscopy. PMID:24977068

  4. VALUE OF THE PHENOMENON OF DEJA VU IN HEALTHY EXAMINEES

    Directory of Open Access Journals (Sweden)

    Pavel Nikolaevich Vlasov

    2009-01-01

    Full Text Available The purpose of the investigation was to study the clinical value of the deja vu phenomenon in healthy examinees as it may occur in healthy individuals, on the one hand, and is a symptom of a number of psychoneurological diseases, on the other. One hundred and twenty-nine subjects, mean age 25,2±4,4 years, were examined. All the examinees were questioned by the original questionnaire developed by the authors, which was to reveal the characteristics of the phenomenon, and the Cambridge depersonalization questionnaire; standard electroencephalography was also performed. The deja vu phenomenon was detected in 97% of the respondents. In healthy individuals, the phenomenon was most common at the age of 21-25 years; 52,2% experienced deja vu several times a year; 64,5% of the respondents reported the 10-sec state; 85% did not associate the occurrence of the phenomenon with any provoking factor; 66% perceived deja vu with a positive emotional tinge, and only 4% of the respondents were afraid of the onset of this phenomenon. These criteria may be used to rule out pathological deja vu

  5. Island formation without attractive interaction

    NARCIS (Netherlands)

    Jansen, A.P.J.

    2008-01-01

    We show that adsorbates on surfaces can form islands even if there are no attractive interactions. Instead, strong repulsion between adsorbates at short distances can lead to islands, because such islands increase the entropy of the adsorbates that are not part of the islands. We suggest that this

  6. The Phenomenon of Superheat of Liquids: In Memory of Vladimir P. Skripov

    Science.gov (United States)

    Skripov, P. V.; Skripov, A. P.

    2010-05-01

    This article is devoted to the memory of Vladimir P. Skripov (1927-2006). He has received worldwide recognition for his monograph on metastable liquids published in 1972 (the English edition was published in 1974). We briefly discuss some studies deal with the phenomenon of attainable superheat of liquids and with measurements of thermophysical properties of liquids under conditions of a moderate degree of superheat. Main attention is paid to the studies performed by V.P. Skripov and his research group in the 1960s and 1970s. Experimental methods which provided break-throughs in research on both spontaneous boiling-up kinetics and substance properties (the specific volume, isobaric heat capacity, ultrasound speed, and viscosity) in super-heated states are presented.

  7. Non-equilibrium effects on the two-phase flow critical phenomenon

    International Nuclear Information System (INIS)

    Sami, S.M.

    1988-01-01

    In the present study, the choking criterion for nonhomogeneous nonequilibrium two phase flow is obtained by solving the two-fluid model conservation equations. The method of characteristics is employed to predict the critical flow conditions. Critical flow is established after the magnitude of the characteristic slopes (velocities). Critical flow conditions are reached when the smallest characteristic slope becomes equal to zero. Several expression are developed to determine the nonequilibrium mass and heat exchanges in terms of the system dependent parameters derivatives. In addition, comprehensive transition flow regime maps are employed in the calculation of interfacial heat and momentum transfer rates. Numerical results reveal that the proposed model reliably predicts the critical two-phase flow phenomenon under different inlet conditions and compares well with other existing models

  8. Detailed profile of m=2 islands with TVTS on JFT-2M

    International Nuclear Information System (INIS)

    Yamauchi, T.; Grek, B.; Hoshino, K.; Le Blanc, B.; Johnson, D.; Felt, J.; Shiina, T.; Kurita, G.; Ishige, Y.; Kozawa, H.

    1996-01-01

    The detailed electron temperature profile (spatial resolution: 0.86 cm) of a low density JFT-2M plasma is measured with the TV Thomson scattering system (TVTS). Flat profiles showing the electron temperature shapes of m=2/n=1 islands are presented, which are in contrast to that without islands. On the other hand, the m=2/n=1 islands are effectively suppressed with local ECRH heating. (orig.)

  9. Coalescence of magnetic islands

    International Nuclear Information System (INIS)

    Pellat, R.

    1982-01-01

    The paper gives the analytical theory of the coalescence instability and of a new, one island, instability. These instabilities are expected to be relevant for the disruptions observed in Tokamak experiments and astrophysical plasmas

  10. Plasma flow healing of magnetic islands in stellarators

    International Nuclear Information System (INIS)

    Hegna, C. C.

    2012-01-01

    Recent experiments from the large helical device (LHD) demonstrate a correlation between the “healing” of vacuum magnetic islands in stellarators and changes in the plasma flow. A model explaining this phenomenon is developed based on self-consistent torque balance and island evolution equations. In conventional stellarators, neoclassical flow damping physics plays an important role in establishing the flow profiles. The balance of neoclassical damping and cross-field viscosity produces a radial boundary layer for the plasma rotation profile outside the separatrix of a locked magnetic island. The width of this boundary layer decreases as the plasma becomes less collisional. Associated with these flow effects are plasma currents flowing in the island region that attempt to suppress island formation. These currents are enhanced as the collisionality drops making magnetic island healing occur more readily in high temperature conventional stellarators. The analytic theory produces a critical β for healing that scales monotonically with collisionality and is in qualitative agreement with LHD observations.

  11. Three Mile Island revisited

    International Nuclear Information System (INIS)

    MacLeod, G.K.

    1986-01-01

    The accident at Three Mile Island proved that the Pennsylvania Department of Health lacked the tools to deal with the serious health consequences that occurred during and after this emergency. Despite the relative safety of nuclear power generation, we must be better prepared for the health and medical consequences of serous radiation emergencies. The author reviews the Three Mile Island accident through the eyes of newspaper reporters

  12. Heat Stress

    Science.gov (United States)

    ... Publications and Products Programs Contact NIOSH NIOSH HEAT STRESS Recommend on Facebook Tweet Share Compartir OSHA-NIOSH ... hot environments may be at risk of heat stress. Exposure to extreme heat can result in occupational ...

  13. Islands and Islandness in Rock Music Lyrics

    Directory of Open Access Journals (Sweden)

    Daniele Mezzana

    2012-05-01

    Full Text Available This paper presents a first exploration, qualitative in character, based on a review of 412 songs produced in the period 1960-2009, about islands in rock music as both social products and social tools potentially contributing to shaping ideas, emotions, will, and desires. An initial taxonomy of 24 themes clustered under five meta-themes of space, lifestyle, emotions, symbolism, and social-political relations is provided, together with some proposals for further research.

  14. Initial estimates of anthropogenic heat emissions for the City of Durban

    CSIR Research Space (South Africa)

    Padayachi, Yerdashin R

    2018-03-01

    Full Text Available Cities in South Africa are key hotspots for regional emissions and climate change impacts including the urban heat island effect. Anthropogenic Heat (AH) emission is an important driver of warming in urban areas. The implementation of mitigation...

  15. Prediction, analysis and solution of flow inversion phenomenon in a typical MTR reactor with upward core cooling

    International Nuclear Information System (INIS)

    El-Morshedy, Salah El-Din

    2010-01-01

    Research reactors of power greater than 20 MW are usually designed to be cooled with upward coolant flow direction inside the reactor core. This is mainly to prevent flow inversion problems following a pump coast down. However, in some designs and under certain operating conditions, flow inversion phenomenon is predicted. In the present work, the best-estimate Material Testing Reactors Thermal-Hydraulic Analysis program (MTRTHA) is used to simulate a typical MTR reactor behavior with upward cooling under a hypothetical case of loss of off-site power. The flow inversion phenomenon is predicted under certain decay heat and/or pool temperature values below the design values. The reactor simulation under loss of off-site power is performed for two cases namely; two-flap valves open and one flap-valve fails to open. The model results for the flow inversion phenomenon prediction is analyzed and a solution of the problem is suggested. (orig.)

  16. Identifying Pathogenicity Islands in Bacterial Pathogenomics Using Computational Approaches

    Directory of Open Access Journals (Sweden)

    Dongsheng Che

    2014-01-01

    Full Text Available High-throughput sequencing technologies have made it possible to study bacteria through analyzing their genome sequences. For instance, comparative genome sequence analyses can reveal the phenomenon such as gene loss, gene gain, or gene exchange in a genome. By analyzing pathogenic bacterial genomes, we can discover that pathogenic genomic regions in many pathogenic bacteria are horizontally transferred from other bacteria, and these regions are also known as pathogenicity islands (PAIs. PAIs have some detectable properties, such as having different genomic signatures than the rest of the host genomes, and containing mobility genes so that they can be integrated into the host genome. In this review, we will discuss various pathogenicity island-associated features and current computational approaches for the identification of PAIs. Existing pathogenicity island databases and related computational resources will also be discussed, so that researchers may find it to be useful for the studies of bacterial evolution and pathogenicity mechanisms.

  17. Development of a transverse mixing model for large scale impulsion phenomenon in tight lattice

    International Nuclear Information System (INIS)

    Liu, Xiaojing; Ren, Shuo; Cheng, Xu

    2017-01-01

    Highlights: • Experiment data of Krauss is used to validate the feasibility of CFD simulation method. • CFD simulation is performed to simulate the large scale impulsion phenomenon for tight-lattice bundle. • A mixing model to simulate the large scale impulsion phenomenon is proposed based on CFD result fitting. • The new developed mixing model has been added in the subchannel code. - Abstract: Tight-lattice is widely adopted in the innovative reactor fuel bundles design since it can increase the conversion ratio and improve the heat transfer between fuel bundles and coolant. It has been noticed that a large scale impulsion of cross-velocity exists in the gap region, which plays an important role on the transverse mixing flow and heat transfer. Although many experiments and numerical simulation have been carried out to study the impulsion of velocity, a model to describe the wave length, amplitude and frequency of mixing coefficient is still missing. This research work takes advantage of the CFD method to simulate the experiment of Krauss and to compare experiment data and simulation result in order to demonstrate the feasibility of simulation method and turbulence model. Then, based on this verified method and model, several simulations are performed with different Reynolds number and different Pitch-to-Diameter ratio. By fitting the CFD results achieved, a mixing model to simulate the large scale impulsion phenomenon is proposed and adopted in the current subchannel code. The new mixing model is applied to some fuel assembly analysis by subchannel calculation, it can be noticed that the new developed mixing model can reduce the hot channel factor and contribute to a uniform distribution of outlet temperature.

  18. Raynaud's phenomenon: peripheral catecholamine concentration and effect of sympathectomy.

    Science.gov (United States)

    Nielsen, S L; Christensen, N J; Olsen, N; Lassen, N A

    1980-01-01

    The reaction to body and finger cooling was recorded in seven patients with relapse of primary Raynaud's phenomenon after sufficiently performed bilateral upper thoracic sympathectomy and for comparison in eight young women with primary Raynaud's phenomenon as well as in seven normal women. The forearm venous concentration of noradrenaline was lower and adrenaline concentration higher in the sympathectomized patients than in the other groups (p less than 0,05). Noradrenaline showed a significant increase during body cooling in normals and primary Raynaud's (p less than 0,05). There was no significant correlation between the vasoconstrictor response to cooling of a finger and the noradrenaline concentration probably due to the fact that skin vasoconstriction impeded release of noradrenaline from the skin. The relapse of Raynaud's phenomenon after surgically sufficient sympathectomy could not be treated by reserpine or alfa-adrenergic receptor blockers in two patients in whom this was tried.

  19. The role of ocean phenomenon in music compositions

    Science.gov (United States)

    Liu, Chi-Min

    2016-04-01

    This is a preliminarily interdisciplinary study for exploring the elements of ocean phenomenon appearing in some compositions of classical music. The so-called ocean phenomenon contain wave conditions, climate change, coastal landform, and other natural events around or over the sea. In some music compositions, it is apparent that natural phenomenon over the sea influence the composers' moods and the music pieces they composed. In this poster, some music compositions in the 19th and the early 20th centuries will be introduced to demonstrate the relation between ocean and music works. These works include Meeresstille by Schubert, Étude Op.25 No.12 by Chopin, Fingal's Cave Overture by Mendelssohn, Der Fliegende Holländer by Wagner and La Mer by Debussy. In addition, present idea may give a novel way for music teachers to elucidate the knowledge of ocean science in classes.

  20. Statistical Agent Based Modelization of the Phenomenon of Drug Abuse

    Science.gov (United States)

    di Clemente, Riccardo; Pietronero, Luciano

    2012-07-01

    We introduce a statistical agent based model to describe the phenomenon of drug abuse and its dynamical evolution at the individual and global level. The agents are heterogeneous with respect to their intrinsic inclination to drugs, to their budget attitude and social environment. The various levels of drug use were inspired by the professional description of the phenomenon and this permits a direct comparison with all available data. We show that certain elements have a great importance to start the use of drugs, for example the rare events in the personal experiences which permit to overcame the barrier of drug use occasionally. The analysis of how the system reacts to perturbations is very important to understand its key elements and it provides strategies for effective policy making. The present model represents the first step of a realistic description of this phenomenon and can be easily generalized in various directions.

  1. Non-CpG island promoter hypomethylation and miR-149 regulate the expression of SRPX2 in colorectal cancer

    DEFF Research Database (Denmark)

    Oster, Bodil; Linnet, Lene; Christensen, Lise Lotte

    2012-01-01

    Gene silencing by DNA hypermethylation of CpG islands is a well-characterized phenomenon in cancer. The effect of hypomethylation in particular of non-CpG island genes is much less well described. By genome-wide screening, we identified 105 genes in microsatellite stable (MSS) colorectal adenocar......Gene silencing by DNA hypermethylation of CpG islands is a well-characterized phenomenon in cancer. The effect of hypomethylation in particular of non-CpG island genes is much less well described. By genome-wide screening, we identified 105 genes in microsatellite stable (MSS) colorectal...... of non-CpG island-associated promoters deregulate gene expression nearly as frequent as do CpG-island hypermethylation. The hypomethylation of SRPX2 is focal and not part of a large block. Furthermore, it often translates to an increased expression level, which may be modulated by miR-149....

  2. Low-Flow Film Boiling Heat Transfer on Vertical Surfaces

    DEFF Research Database (Denmark)

    Munthe Andersen, J. G.; Dix, G. E.; Leonard, J. E.

    1976-01-01

    The phenomenon of film boiling heat transfer for high wall temperatures has been investigated. Based on the assumption of laminar flow for the film, the continuity, momentum, and energy equations for the vapor film are solved and a Bromley-type analytical expression for the heat transfer...... length, an average film boiling heat transfer coefficient is obtained....

  3. A suggestion for multidisciplinarity: the fluorescence phenomenon observation

    Directory of Open Access Journals (Sweden)

    Jorge Roberto Pimentel

    2014-05-01

    Full Text Available Multidisciplinary approaches involving daily phenomena are valuable teaching tools to stimulate reflections in order to comprehend that scientific knowledge is developed in a collective process, as well as to understand the importance that scientific research cannot be done in a unique area of knowledge for the full understanding of any phenomenon. We suggest the fluorescence phenomenon observation in some materials, objects and living organisms so that students realize the interaction between Physics, Chemistry and Biology, generally regarded as not correlated disciplines.

  4. The ferro-resonance, a phenomenon sometimes chaotic

    Energy Technology Data Exchange (ETDEWEB)

    Grison, P; Kieny, J C; Riouai, M [Electricite de France (EDF), 92 - Clamart (France)

    1996-04-01

    The ferro-resonance is a resonance phenomenon involving the saturation of the magnetic core in transformers; in particular, it is generated by the energization of that equipment during a power system restoration. It exhibits classical periodic regimes, but also more complex ones, as harmonic, pseudo-periodic, even chaotic, which have been measured on site or during laboratory tests. The mathematical analysis of this phenomenon belongs to the theory of bifurcations; the use of a program solving non linear systems may lead to a better understanding of the observed overvoltages. (authors). 14 figs., 2 photos.

  5. What types of investors generate the two-phase phenomenon?

    Science.gov (United States)

    Ryu, Doojin

    2013-12-01

    We examine the two-phase phenomenon described by Plerou, Gopikrishnan, and Stanley (2003) [1] in the KOSPI 200 options market, one of the most liquid options markets in the world. By analysing a unique intraday dataset that contains information about investor type for each trade and quote, we find that the two-phase phenomenon is generated primarily by domestic individual investors, who are generally considered to be uninformed and noisy traders. In contrast, our empirical results indicate that trades by foreign institutions, who are generally considered informed and sophisticated investors, do not exhibit two-phase behaviour.

  6. Systemic sclerosis without antinuclear antibodies or Raynaud's phenomenon

    DEFF Research Database (Denmark)

    Schneeberger, D.; Tyndall, A.; Walker, U.A.

    2013-01-01

    Objective: To assess patients with SSc who present without circulating antinuclear antibodies (ANA) or Raynaud’s phenomenon (RP). Methods: 5390 patients who fulfilled the ACR criteria for SSc and were enrolled in the EULAR Scleroderma Trials And Research (EUSTAR) database were screened for the ab......Objective: To assess patients with SSc who present without circulating antinuclear antibodies (ANA) or Raynaud’s phenomenon (RP). Methods: 5390 patients who fulfilled the ACR criteria for SSc and were enrolled in the EULAR Scleroderma Trials And Research (EUSTAR) database were screened...

  7. The Stokes Phenomenon, Borel Summation and Mellin-Barnes Regularisation

    CERN Document Server

    Kowalenko, Victor

    2009-01-01

    The Stokes phenomenon refers to the emergence of jump discontinuities in asymptotic expansions at specific rays in the complex plane. This book presents a radical theory for the phenomenon by introducing the concept of regularization. Two methods of regularization, Borel summation and Mellin-Barnes regularization, are used to derive general expressions for the regularized values of asymptotic expansions throughout the complex plane. Though different, both yield identical values, which, where possible, agree with the original functions. Consequently, asymptotics has been elevated to a true disc

  8. Heat stress related dairy cow mortality during heat waves and control periods in rural Southern Ontario from 2010?2012

    OpenAIRE

    Bishop-Williams, Katherine E.; Berke, Olaf; Pearl, David L.; Hand, Karen; Kelton, David F.

    2015-01-01

    Background Heat stress is a physiological response to extreme environmental heat such as heat waves. Heat stress can result in mortality in dairy cows when extreme heat is both rapidly changing and has a long duration. As a result of climate change, heat waves, which are defined as 3 days of temperatures of 32 ?C or above, are an increasingly frequent extreme weather phenomenon in Southern Ontario. Heat waves are increasing the risk for on-farm dairy cow mortality in Southern Ontario. Heat st...

  9. Heat pumps

    CERN Document Server

    Macmichael, DBA

    1988-01-01

    A fully revised and extended account of the design, manufacture and use of heat pumps in both industrial and domestic applications. Topics covered include a detailed description of the various heat pump cycles, the components of a heat pump system - drive, compressor, heat exchangers etc., and the more practical considerations to be taken into account in their selection.

  10. Heron Island, Australia

    Science.gov (United States)

    2002-01-01

    Heron Island is located at the sourthern end of Australia's 2,050 km-long Great Barrier Reef. Surrounded by coral reef and home to over 1000 species of fish, scuba divers and scientists alike are drawn to the island's resort and research station. The true-color image above was taken by Space Imaging's Ikonos satellite with a resolution of 4 meters per pixel-high enough to see individual boats tied up at the small marina. The narrow channel leading from the marina to the ocean was blasted and dredged decades ago, before the island became a national park. Since then the Australian government has implemented conservation measures, such as limiting the number of tourists and removing or recycling, instead of incinerating, all trash. One of the applications of remote sensing data from Ikonos is environmental monitoring, including studies of coral reef health. For more information about the island, read Heron Island. Image by Robert Simmon, based on data copyright Space Imaging

  11. Modelling domestic stock energy use and heat-related health risk : a GIS-based bottom-up modelling approach

    Energy Technology Data Exchange (ETDEWEB)

    Mavrogianni, A.; Davies, M. [Univ. College London, London (United Kingdom). Bartlett School of Graduate Studies; Chalabi, Z.; Wilkinson, P. [London School of Hygiene and Tropical Medecine, London (United Kingdom); Kolokotroni, M. [Brunel Univ., London (United Kingdom). School of Engineering Design

    2009-07-01

    Approximately 8 per cent of the carbon dioxide (CO{sub 2}) emissions produced in the United Kingdom are produced in London, one of the fastest growing cities worldwide. Based on the projected rates of population and economic growth, a 15 per cent increase of emissions is predicted. In addition to the national target to cut emissions by 80 per cent by 2050, the Mayor of London Climate Change Action Plan set a target to reduce London's CO{sub 2} emissions by 60 per cent by 2025. Significant carbon savings can be achieved in the building sector, particularly since 38 per cent of the total delivered energy in London is associated with domestic energy use. This paper demonstrated a systematic approach towards exploring the impact of urban built form and the combined effect of climate change and the urban heat island (UHI) phenomenon on the levels of domestic energy consumption and heat-related health risk in London. It presented work in progress on the development of a GIS-based energy consumption model and heat vulnerability index of the Greater London Area domestic stock. Comparison of the model output for 10 case study areas with topdown energy statistics revealed that the model successfully ranks areas based on their domestic space heating demand. The health module can be used to determine environments prone to higher risk of heat stress by investigating urban texture factors. A newly developed epidemiological model will be feed into the health module to examine the influence on risk of heat-related mortality of local urban built form characteristics. The epidemiological model is based on multi-variable analysis of deaths during heat wave and non-heat wave days. 29 refs., 1 tab., 7 figs.

  12. Ecological release and venom evolution of a predatory marine snail at Easter Island.

    Science.gov (United States)

    Duda, Thomas F; Lee, Taehwan

    2009-05-20

    Ecological release is coupled with adaptive radiation and ecological diversification yet little is known about the molecular basis of phenotypic changes associated with this phenomenon. The venomous, predatory marine gastropod Conus miliaris has undergone ecological release and exhibits increased dietary breadth at Easter Island. We examined the extent of genetic differentiation of two genes expressed in the venom of C. miliaris among samples from Easter Island, American Samoa and Guam. The population from Easter Island exhibits unique frequencies of alleles that encode distinct peptides at both loci. Levels of divergence at these loci exceed observed levels of divergence observed at a mitochondrial gene region at Easter Island. Patterns of genetic variation at two genes expressed in the venom of this C. miliaris suggest that selection has operated at these genes and contributed to the divergence of venom composition at Easter Island. These results show that ecological release is associated with strong selection pressures that promote the evolution of new phenotypes.

  13. Freezing of gait: moving forward on a mysterious clinical phenomenon

    NARCIS (Netherlands)

    Nutt, J.G.; Bloem, B.R.; Giladi, N.; Hallett, M.; Horak, F.B.; Nieuwboer, A.

    2011-01-01

    Freezing of gait (FoG) is a unique and disabling clinical phenomenon characterised by brief episodes of inability to step or by extremely short steps that typically occur on initiating gait or on turning while walking. Patients with FoG, which is a feature of parkinsonian syndromes, show variability

  14. The Game "Pokemon Go" as a Crosscultural Phenomenon

    Science.gov (United States)

    Koroleva, D. O.; Kochervey, A. I.; Nasonova, K. M.; Shibeko, Yu. V.

    2016-01-01

    The gaming culture of modern childhood takes place not only in real space, but in a virtual one too. These two components (two planes of development) are often viewed in isolation from one another. This study investigates the completely new phenomenon of augmented reality gaming through the lens of "Pokemon Go," and it describes how the…

  15. The E-Book Phenomenon: A Disruptive Technology

    Science.gov (United States)

    Wilson, T. D.

    2014-01-01

    Introduction: The e-book and its associated technology have emerged as a disruptive technology over the past ten years. The aim of this paper is to discuss some of the consequences of this development, based on the work of the e-books in Sweden research projects. Argument: To explain the impact of the e-book phenomenon we use Winston's theory of…

  16. Presenteeism – (Not new phenomenon in the occupational environment

    Directory of Open Access Journals (Sweden)

    Agata Wężyk

    2013-12-01

    Full Text Available Presenteeism, understood as being at work while ill, is not a new phenomenon. However, not long ago it has become an object of researchers' interest. Formerly, they focused mainly on absenteeism. In general, presenteesim is perceived as negative and very costly for employers. The majority of scientific studies refer to the problem of employees' productivity reduced due to their attending work despite being ill, but the knowledge about presenteeism's causes and effects (other than decreased productivity for both, the employee and the organisation, is still very limited. Especially in Poland there are very few scientific reports on this issue. However, the paper on presenteeism published recently (the 3/2013 issue of this Journal defined this phenomenon as a noneffective presence at work. The authors postulate to avoid pejorative connotation of this term by equating presenteeism with loss of productivity, and to separate this phenomenon from its possible negative and positive consequences. Thus, this paper aims at presenting current state of the art on this phenomenon, including such issues as definitional problems, measures and frequency of presenteeism, as well as its causes and consequences. In this paper presenteeism is presented in a wider perspective of its individual and contextual determinants. Med Pr 2013;64(6:847–861

  17. Multichannel customer management : Understanding the research-shopper phenomenon

    NARCIS (Netherlands)

    Verhoef, Peter C.; Neslin, Scott A.; Vroomen, Bjorn

    This paper develops and estimates a model for understanding the causes of research shopping, and investigates potential strategies for managing it. The research-shopper phenomenon is the tendency of customers to use one channe