Integration of atomic layer deposition CeO2 thin films with functional complex oxides and 3D patterns

International Nuclear Information System (INIS)

Coll, M.; Palau, A.; Gonzalez-Rosillo, J.C.; Gazquez, J.; Obradors, X.; Puig, T.

2014-01-01

We present a low-temperature, < 300 °C, ex-situ integration of atomic layer deposition (ALD) ultrathin CeO 2 layers (3 to 5 unit cells) with chemical solution deposited La 0.7 Sr 0.3 MnO 3 (LSMO) functional complex oxides for multilayer growth without jeopardizing the morphology, microstructure and physical properties of the functional oxide layer. We have also extended this procedure to pulsed laser deposited YBa 2 Cu 3 O 7 (YBCO) thin films. Scanning force microscopy, X-ray diffraction, aberration corrected scanning transmission electron microscopy and macroscopic magnetic measurements were used to evaluate the quality of the perovskite films before and after the ALD process. By means of microcontact printing and ALD we have prepared CeO 2 patterns using an ozone-robust photoresist that will avoid the use of hazardous lithography processes directly on the device components. These bilayers, CeO 2 /LSMO and CeO 2 /YBCO, are foreseen to have special interest for resistive switching phenomena in resistive random-access memory. - Highlights: • Integration of atomic layer deposition (ALD) CeO 2 layers on functional complex oxides • Resistive switching is identified in CeO 2 /La 0.7 Sr 0.3 MnO 3 and CeO 2 /YBa 2 Cu 3 O 7 bilayers. • Study of the robustness of organic polymers for area-selective ALD • Combination of ALD and micro-contact printing to obtain 3D patterns of CeO 2

Design of bimetal catalysts Pt-Ni/CeO_2-1D for generation of H_2 by the reforming reaction of methanol

International Nuclear Information System (INIS)

Sarmiento F, I.

2016-01-01

CeO_2 nano rods were synthesized by hydrothermal method and were used as support for preparing catalysts bimetallic Pt Ni / CeO_2-1D. The catalysts were prepared by classical impregnation by the conventional wet method. The prepared catalysts are Pt (0.5 %) - Ni (5 %) / CeO_2 and Pt (0.5 %) - Ni (15 %) / CeO_2, which were characterized by different physico-chemical techniques: Bet, Sem, TPR and XRD, that were evaluated in the Auto thermal Steam reforming of Methanol for H_2 production. The Bet surface area results, show that the surface area of the catalysts decreases as the nominal load of Ni in the catalyst, increases. Sem shows, that the catalyst support (CeO_2-1D) and the bimetallic catalysts are conformed by nano rods. By XRD were identified the crystalline phases present, in the catalytic material: cerianite distinctive phase of cerium oxide and metallic Ni; however it was not possible to observe diffraction peaks of Platinum using this technique. The temperature-programmed reduction (TPR) analysis allowed to obtain the reduction profiles, of the different species present on the catalysts. The catalytic activity tests carried out, showed that the catalysts total 100% methanol conversion is achieved at 300 degrees Celsius, making them excellent, to be used in reactions at low temperature conditions. Selectivity towards H_2, is very similar in both catalysts, and it reaches a 50% yield per mole of methanol fed stoichiometrically. (Author)

Design of bimetal catalysts Pt-Ni/CeO{sub 2}-1D for generation of H{sub 2} by the reforming reaction of methanol; Diseno de catalizadores bimetalicos Pt-Ni/CeO{sub 2}-1D para generacion de H{sub 2} mediante la reaccion de reformado de metanol

Energy Technology Data Exchange (ETDEWEB)

Sarmiento F, I.

2016-07-01

CeO{sub 2} nano rods were synthesized by hydrothermal method and were used as support for preparing catalysts bimetallic Pt Ni / CeO{sub 2}-1D. The catalysts were prepared by classical impregnation by the conventional wet method. The prepared catalysts are Pt (0.5 %) - Ni (5 %) / CeO{sub 2} and Pt (0.5 %) - Ni (15 %) / CeO{sub 2}, which were characterized by different physico-chemical techniques: Bet, Sem, TPR and XRD, that were evaluated in the Auto thermal Steam reforming of Methanol for H{sub 2} production. The Bet surface area results, show that the surface area of the catalysts decreases as the nominal load of Ni in the catalyst, increases. Sem shows, that the catalyst support (CeO{sub 2}-1D) and the bimetallic catalysts are conformed by nano rods. By XRD were identified the crystalline phases present, in the catalytic material: cerianite distinctive phase of cerium oxide and metallic Ni; however it was not possible to observe diffraction peaks of Platinum using this technique. The temperature-programmed reduction (TPR) analysis allowed to obtain the reduction profiles, of the different species present on the catalysts. The catalytic activity tests carried out, showed that the catalysts total 100% methanol conversion is achieved at 300 degrees Celsius, making them excellent, to be used in reactions at low temperature conditions. Selectivity towards H{sub 2}, is very similar in both catalysts, and it reaches a 50% yield per mole of methanol fed stoichiometrically. (Author)

Effect of yttrium on electron–phonon coupling strength of 5d state of Ce3+ ion in LYSO:Ce crystals

International Nuclear Information System (INIS)

Ding, Dongzhou; Liu, Bo; Wu, Yuntao; Yang, Jianhua; Ren, Guohao; Chen, Junfeng

2014-01-01

This paper aims at an improved understanding of luminescence properties of (Lu 1−x Y x ) 2 SiO 5 :Ce (x=0 at%, 26 at%, 45 at%, 66 at% and 100 at%). Photoluminescence emission and excitation spectra as well as Raman spectra of (Lu 1−x Y x ) 2 SiO 5 :Ce were investigated as a function of yttrium (shortened as Y) content in it. Obtained Huang–Rhys factor S indicates that the coupling between Ce1 (7-oxygen-coordinated), Ce2 (6-oxygen-coordinated) and LYSO lattice is intermediate and strong, respectively. Besides, it was found that: with the increase of Y content, crystal field strength around Ce1 and Ce2 decreases, Stokes shift of Ce1 and Ce2 presents an increase trend, and S of Ce2 tends to decrease. These phenomena were explained by geometrical influence of Y 3+ /Lu 3+ on the crystal field splitting of the 5d levels of Ce 3+ and coupling strength. With the increase of Y content, the evolution of S and coupling energy ħω of Ce1 present a slight increase and decrease trend respectively, while S and coupling energy ħω of Ce2 present an obvious decrease and increase trend, respectively. - Highlights: • Crystal field strength around Ce1 decreases with increase of Y content in LYSO:Ce. • A diagram of Huang–Rhys factor S against Y content in LYSO:Ce was constructed. • A diagram of coupling energy ħω against Y content in LYSO:Ce was constructed. • A diagram of Stokes shift against Y content in LYSO:Ce was constructed

Hemodynamic simulation of the heart using a 2D model and MR data

DEFF Research Database (Denmark)

Adeler, Pernille Thorup

2002-01-01

Computational models of the blood flow in the heart are a useful tool for studying the functioning of the heart. The purpose of this thesis is to achieve a better understanding of hemodynamics of the normal and diseased hearts through the use of a computational model and magnetic resonance (MR......) data. We present a 2D computational model of the blood flow in the left side of the heart. The work is based on Peskin and McQueen's 2D model dimensioned to data on the dog heart, which we improve and adjust using physiological knowledge and MR velocity data to achieve a model of the human heart...... by letting the apical region be inactive. In both of these cases the simulation results compare well with clinically observed data on dogs and humans. We present Peskin and McQueen's 3D model of the entire human heart and the nearby great vessels. We perform a simulation with the model, where we adjust...

Eff icient energy back transfer from Ce{sup 3+} 5d state to Pr{sup 3+} {sup 1}D{sub 2} level in Lu{sub 3}Al{sub 5}O{sub 12} upon Pr{sup 3+} 4f5d excitation

Energy Technology Data Exchange (ETDEWEB)

Dan Wu [State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, Jilin (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Hao, Zhendong; Zhang, Xia; Pan, Guo-Hui; Luo, Yongshi; Zhang, Ligong; Zhao, Haifeng [State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, Jilin (China); Zhang, Jiahua, E-mail: zhangjh@ciomp.ac.cn [State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, Jilin (China)

2017-06-15

The step energy transfers from Pr{sup 3+} 4f5d state to Ce{sup 3+} 5d state followed by energy back transfer from Ce{sup 3+} 5d state to Pr{sup 3+} {sup 1}D{sub 2} level are studied. The Ce{sup 3+}→Pr{sup 3+} energy back transfer upon Pr{sup 3+} 4f5d excitation is found to be more efficient than the normal Ce{sup 3+}→Pr{sup 3+} energy transfer upon Ce{sup 3+} 5d excitation. The efficient energy back transfer is attributed to preferential excitation of the Ce{sup 3+} ion with an adjacent Pr{sup 3+} surrounding in Pr{sup 3+}→Ce{sup 3+} energy transfer of the first step, whereas Ce{sup 3+} is excited randomly in the normal energy transfer. The efficiencies of Ce{sup 3+}→Pr{sup 3+} energy back transfer as a function of Ce{sup 3+} and Pr{sup 3+} concentration are evaluated, respectively.

Preparation and luminescence properties of Ce3+ and Ce3+/Tb(3+)-activated Y4Si2O7N2 phosphors.

Science.gov (United States)

Xia, Zhiguo; Wu, Weiwei

2013-09-28

Ce(3+) and Ce(3+)/Tb(3+)-activated Y4Si2O7N2 phosphors are synthesized by the solid-state method, which can be efficiently excited by near ultraviolet (UV) light emitting diode (LED) chips. The PL spectrum of Y4Si2O7N2:Ce(3+) shows a broad hump between 380 and 650 nm, assigned to the electron transition from the 4f energy level to different 5d sub levels of the Ce(3+) ions at different Y(3+) sites. The color of the Y4Si2O7N2:Ce(3+) phosphor can shift from blue to green by introducing Tb(3+). In addition, the energy transfer process from Ce(3+) to Tb(3+) in the Y4Si2O7N2 host was investigated and discussed in terms of both the luminescence spectra and decay curves. The energy transfer critical distance has been calculated and evaluated by the concentration quenching method. Therefore, the Ce(3+) and Ce(3+)/Tb(3+)-activated Y4Si2O7N2 phosphors can serve as key materials for phosphor-converted white-light UV-LEDs.

Generation and Radiation of Acoustic Waves from a 2-D Shear Layer using the CE/SE Method

Science.gov (United States)

Loh, Ching Y.; Wang, Xiao Y.; Chang, Sin-Chung; Jorgenson, Philip C. E.

2000-01-01

In the present work, the generation and radiation of acoustic waves from a 2-D shear layer problem is considered. An acoustic source inside of a 2-D jet excites an instability wave in the shear layer, resulting in sound Mach radiation. The numerical solution is obtained by solving the Euler equations using the space time conservation element and solution element (CE/SE) method. Linearization is achieved through choosing a small acoustic source amplitude. The Euler equations are nondimensionalized as instructed in the problem statement. All other conditions are the same except that the Crocco's relation has a slightly different form. In the following, after a brief sketch of the CE/SE method, the numerical results for this problem are presented.

Chiral separation and chemical profile of Dengzhan Shengmai by integrating comprehensive with multiple heart-cutting two-dimensional liquid chromatography coupled with quadrupole time-of-flight mass spectrometry.

Science.gov (United States)

Sheng, Ning; Zheng, Hao; Xiao, Yao; Wang, Zhe; Li, Menglin; Zhang, Jinlan

2017-09-29

Chemical profile for Chinese medicine formulas composed of several herbs is always a challenge due to a big array of small molecules with high chemical diversity so much as isomers. The present paper develops a feasible strategy to characterize and identify complex chemical constituents of a four-herb traditional Chinese medicine formula, Denzhan Shenmai (DZSM) by integrating comprehensive two-dimensional liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (LC×LC-qTOF-MS) with multiple heart-cutting two-dimensional liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (MHC-qTOF-MS). DZSM was separated by C8×C18 HPLC column system for comprehensive two-dimensional liquid chromatography system and 283 compounds most of which belonged to phenolic acid, flavonoid, saponin and lignan families were characterized and identified within 75min. Some isomers and compounds at low level were analyzed on C8×Chiral HPLC column system for multiple heart-cutting two-dimensional liquid chromatography system with 1D and 2D optimized gradient elution program. These 1D cutting fractions were successively separated on 2D chiral chromatographic column under extended the 2D gradient elution time from 30s to 5.0min. 12 pairs of isomer compounds were separated with good resolution. The combination of LC×LC and MHC system provides a powerful technique for global chemical profiling of DZSM and provided feasible strategy for other complex systems. Copyright © 2017 Elsevier B.V. All rights reserved.

Relationship between the optimum cut off frequency for Butter worth filter and lung-heart ratio in 99mTc myocardial SPECT

International Nuclear Information System (INIS)

Salihin Yusoff, M. N.; Zakaria, A.

2010-01-01

We investigated whether the lung-heart ratio parameter can be used to identify the optimum cut off frequency for Butter worth filter in 99m Tc myocardial SPECT imaging. Materials and Methods: This study involved a cardiac phantom system consisting of cardiac insert in which 1.10 cm cold defect was inserted into its myocardium wall and filled with 4.0 μCi/ml (0.148 MBq/ml) 99m Tc concentration. The cardiac insert was then put into a cylindrical tank which filled with six different 99m Tc concentrations as background. Thus, six target background concentrations ratios (T/B) were carried out. The lung-heart ratio was determined for every SPECT raw image obtained corresponding to each T/B. Then, 130 different combinations of filter parameters from Butter worth filter were utilized to reconstruct each SPECT raw image. The determination of count in myocardium, background, and defect regions of interest were performed for every reconstructed image. All the count values were then used to calculate contrast, signal-to-noise ratio, and defect size. Each criterion was graded (1 to 100) and then summed together to obtain total grade. The optimum cut off frequency for each lung-heart ratio was determined from the total grade. The relation between optimum cut off frequency for Butter worth filter and lung-heart ratio was established using linear regression. Results: There were good relationship between the optimum Butter worth cut off frequency and lung-heart ratio (R 2 = 0.864, p<0.01). The optimal cut off frequency correspond to the change in lung-heart ratio can be expressed by the equation: Optimum cut off frequency=0.715*lung-heart ratio + 0.227. Conclusion: This study suggests that the optimum cut off frequency for Butter worth filter should be determined by referring to lung-heart ratio in each patient study.

Satellite line mapping in Eu3+–Ce3+ and Pr3+–Ce3+ codoped Y2SiO5

International Nuclear Information System (INIS)

Serrano, D.; Karlsson, J.; Zheng, L.; Dong, Y.; Ferrier, A.; Goldner, P.; Walther, A.; Rippe, L.; Kröll, S.

2016-01-01

In this work we perform a high-resolution spectroscopic investigation of Eu 3+ –Ce 3+ and Pr 3+ –Ce 3+ codoped Y 2 SiO 5 crystals. Satellite line spectra were recorded at low temperatures around the Eu 3+ : 7 F 0 → 5 D 0 and the Pr 3+ : 3 H 4 → 1 D 2 transitions. It is observed that the incorporation of Ce 3+ as a codopant notably changes the Eu 3+ and Pr 3+ satellite line patterns. Satellite lines measured in singly doped Eu 3+ :Y 2 SiO 5 were found at the same spectral positions in Eu 3+ –Ce 3+ codoped crystals. These coincident lines were concluded to be due to pairs of Eu 3+ ions. Extra satellite lines appeared in the codoped crystals, which were assigned to Ce 3+ related structures such as Ce 3+ –Eu 3+ pairs. The analysis of the Pr 3+ satellite line spectra presents further challenges. Satellite lines associated to Pr 3+ pairs show weaker intensity, presumably due to the efficient quenching of the Pr 3+1 D 2 emission through cross-relaxation paths ( 1 D 2 → 1 G 4 ; 3 H 4 → 3 F 4 ). The investigation of the Eu 3+ and Pr 3+ satellite line patterns in Y 2 SiO 5 is particularly interesting for their exploitation in rare-earth based quantum computation schemes. - Highlights: • We recorded Eu and Pr satellite lines in Y 2 SiO 5 with and without Ce as a codopant. • The presence of Ce leads to the appearance of extra satellite lines in the spectra. • The satellite lines are associated to minor crystal sites such as ion pairs. • Less than 100 ion pairs were detected per satellite line. • The exploitation of the satellite line structure is proposed for quantum computing.

ANALYSIS OF CUTTING FORCE AND CHIP MORPHOLOGY DURING HARD TURNING OF AISI D2 STEEL

Directory of Open Access Journals (Sweden)

X. M. ANTHONY

2015-03-01

Full Text Available In this research work AISI D2 tool steel at a hardness of 55 HRC is being used for experimental investigation. Cutting speed, feed rate and depth of cut are the cutting parameters considered for the experimentation along with tool geometry namely, nose radius, clearance angle and rake angle. Three different cutting tool materials are used for experimentation namely multicoated carbide, cermet and ceramic inserts. The cutting force generated during the machining process is being measured using Kistler dynamometer and recorded for further evaluation. The chips produced during the machining process for every experimental trail is also collected for understanding the chip morphology. Based on the experimental data collected Analysis of Variance (ANOVA was conducted to understand the influence of all cutting parameters and tool geometry on cutting force.

Assessing Hubbard-corrected AM05+U and PBEsol+U density functionals for strongly correlated oxides CeO_2 and Ce_2O_3

International Nuclear Information System (INIS)

Weck, Philippe F.; Kim, Eunja

2016-01-01

The structure–property relationships of bulk CeO_2 and Ce_2O_3 have been investigated using AM05 and PBEsol exchange–correlation functionals within the frameworks of Hubbard-corrected density functional theory (DFT+U) and density functional perturbation theory (DFPT+U). Compared with conventional PBE+U, RPBE+U, PW91+U and LDA+U functionals, AM05+U and PBEsol+U describe experimental crystalline parameters and properties of CeO_2 and Ce_2O_3 with superior accuracy, especially when +U is chosen close to its value derived by the linear-response approach. Lastly, the present findings call for a reexamination of some of the problematic oxide materials featuring strong f- and d-electron correlation using AM05+U and PBEsol+U.

Superconductivity and anomalous normal state in the CePd2Si2/CeNi2Ge2 system

International Nuclear Information System (INIS)

Grosche, F.M.; Lister, S.J.S.; Carter, F.V.; Saxena, S.S.; Haselwimmer, R.K.W.; Mathur, N.D.; Julian, S.R.; Lonzarich, G.G.

1997-01-01

The unconventional nonmagnetic metal CeNi 2 Ge 2 is characterised at ambient pressure by temperature dependences of the specific heat and of the resistivity which deviate strongly from standard Fermi-liquid predictions and are reminiscent of the behaviour observed in its sibling system CePd 2 Si 2 above the critical pressure at which magnetic order is suppressed. We have explored the CePd 2 Si 2 /CeNi 2 Ge 2 phase diagram in a series of resistivity measurements under high hydrostatic pressure, p. At p>15 kbar, a new superconducting transition appears below 220 mK in CeNi 2 Ge 2 and shifts to higher temperatures with increasing pressure, reaching ∝400 mK at p∝26 kbar. (orig.)

3D overlapped grouping Ga for optimum 2D guillotine cutting stock problem

Directory of Open Access Journals (Sweden)

Maged R. Rostom

2014-09-01

Full Text Available The cutting stock problem (CSP is one of the significant optimization problems in operations research and has gained a lot of attention for increasing efficiency in industrial engineering, logistics and manufacturing. In this paper, new methodologies for optimally solving the cutting stock problem are presented. A modification is proposed to the existing heuristic methods with a hybrid new 3-D overlapped grouping Genetic Algorithm (GA for nesting of two-dimensional rectangular shapes. The objective is the minimization of the wastage of the sheet material which leads to maximizing material utilization and the minimization of the setup time. The model and its results are compared with real life case study from a steel workshop in a bus manufacturing factory. The effectiveness of the proposed approach is shown by comparing and shop testing of the optimized cutting schedules. The results reveal its superiority in terms of waste minimization comparing to the current cutting schedules. The whole procedure can be completed in a reasonable amount of time by the developed optimization program.

Comparison of 3D TOF-MRA and 3D CE-MRA at 3 T for imaging of intracranial aneurysms

International Nuclear Information System (INIS)

Cirillo, Mario; Scomazzoni, Francesco; Cirillo, Luigi; Cadioli, Marcello; Simionato, Franco; Iadanza, Antonella; Kirchin, Miles; Righi, Claudio; Anzalone, Nicoletta

2013-01-01

Purpose: To compare 3 T elliptical-centric CE MRA with 3 T TOF MRA for the detection and characterization of unruptured intracranial aneurysms (UIAs), by using digital subtracted angiography (DSA) as reference. Materials and methods: Twenty-nine patients (12 male, 17 female; mean age: 62 years) with 41 aneurysms (34 saccular, 7 fusiform; mean diameter: 8.85 mm [range 2.0–26.4 mm]) were evaluated with MRA at 3 T each underwent 3D TOF-MRA examination without contrast and then a 3D contrast-enhanced (CE-MRA) examination with 0.1 mmol/kg bodyweight gadobenate dimeglumine and k-space elliptic mapping (Contrast ENhanced Timing Robust Angiography [CENTRA]). Both TOF and CE-MRA images were used to evaluate morphologic features that impact the risk of rupture and the selection of a treatment. Almost half (20/41) of UIAs were located in the internal carotid artery, 7 in the anterior communicating artery, 9 in the middle cerebral artery and 4 in the vertebro-basilar arterial system. All patients also underwent DSA before or after the MR examination. Results: The CE-MRA results were in all cases consistent with the DSA dataset. No differences were noted between 3D TOF-MRA and CE-MRA concerning the detection and location of the 41 aneurysms or visualization of the parental artery. Differences were apparent concerning the visualization of morphologic features, especially for large aneurysms (>13 mm). An irregular sac shape was demonstrated for 21 aneurysms on CE-MRA but only 13/21 aneurysms on 3D TOF-MRA. Likewise, CE-MRA permitted visualization of an aneurismal neck and calculation of the sac/neck ratio for all 34 aneurysms with a neck demonstrated at DSA. Conversely, a neck was visible for only 24/34 aneurysms at 3D TOF-MRA. 3D CE-MRA detected 15 aneurysms with branches originating from the sac and/or neck, whereas branches were recognized in only 12/15 aneurysms at 3D TOF-MRA. Conclusion: For evaluation of intracranial aneurysms at 3 T, 3D CE-MRA is superior to 3D TOF

Competition of Kondo spin fluctuations and RKKY interactions in CeRh/sub 2/Si/sub 2-x/Ge/sub x/ and CeM/sub 2/X/sub 2/ compounds: a Kondo necklace problem

Energy Technology Data Exchange (ETDEWEB)

Godart, C; Gupta, L C; Tomy, C V; Vijayaraghavan, R; Thompson, J D

1989-02-15

We present the results of our measurements of the lattice constants and magnetic susceptibility of the pseudo-ternary system which crystallizes in the tetragonal ThCr/sub 2/Si/sub 2/ structure. Both of the cell constants a and c increase linearly with x. The magnetic ordering temperature T/sub N/ exhibits initially an enhancement with the increase in x and then decreases as x continues to increase further. These results, along with those on the pressure dependence of T/sub N/ in CeRh/sub 2/Si/sub 2/, can be understood on the basis of the Doniach's model of a Kondo necklace. We discuss also the applicability of this model to describe the strong correlation between the structural aspects and the ground-state properties of the whole series of Ce-based ternaries CeM/sub 2/X/sub 2/ (M = 3d, 4d and 5d elements; X = Si, Ge).

Substrate-dependent Au{sub x} cluster: A new insight into Au{sub x}/CeO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Zhu, Kong-Jie; Yang, Yan-Ju [School of Chemistry and Life Science, Zhejiang Normal University, Jinhua 321004 (China); Lang, Jia-Jian [School of Chemistry and Life Science, Zhejiang Normal University, Jinhua 321004 (China); Engineering Laboratory of Specialty Fibers and Nuclear Energy Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, Zhejiang 315201 (China); Teng, Bo-Tao, E-mail: tbt@zjnu.cn [School of Chemistry and Life Science, Zhejiang Normal University, Jinhua 321004 (China); Wu, Feng-Min [School of Chemistry and Life Science, Zhejiang Normal University, Jinhua 321004 (China); Du, Shi-Yu [Engineering Laboratory of Specialty Fibers and Nuclear Energy Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, Zhejiang 315201 (China); Wen, Xiao-Dong, E-mail: wxd@sxicc.ac.cn [State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001 (China)

2016-11-30

Graphical abstract: 2D Au{sub x} (x < 10) on CeO{sub 2}(110) are more stable than 3D ones, while the stability trend changes for x ≥ 10; Au{sub x} (x ≤ 4) prefer to monatomically disperse on CeO{sub 2}(100) and aggregate to 3D clusters for x > 4. - Highlights: • The stable structures of Au{sub x}/CeO{sub 2} are dependent of index surfaces of CeO{sub 2}. • Au{sub x} prefers to monatomically disperse on CeO{sub 2}(100) at low coverage. • Au{sub x} aggregates to 3D clusters on CeO{sub 2}(100) at high coverage. • 2D Au{sub x} (x < 10) are more stable than the 3D ones on CeO{sub 2}(110). • The effects on the stability of Au{sub x}/CeO{sub 2} are systematically discussed. - Abstract: To theoretically study the structures of metal clusters on oxides is very important and becomes one of the most challenging works in computational heterogeneous catalysis since many factors affect their structures and lead to various possibilities. In this work, it is very interesting to find that the stable structures and stability evolution of Au{sub x} clusters on ceria are varied with different index surfaces of CeO{sub 2}. The corresponding reasons in chemical, geometric and electronic properties are systematically explored. Au{sub x} (x = 1–4) clusters prefer to separately disperse at the O-O bridge sites on CeO{sub 2}(100) due to the low coordination number of surface O; while aggregate due to the strong Au–Au attractions when x is larger than 4. Owing to the uniform distribution of O-O bridge sites on CeO{sub 2}(111) and (100), the most stable configurations of Au{sub x} are 3D structures with bottom atoms more than top ones when x is larger than 4. However, 2D configurations of Au{sub x}/CeO{sub 2}(110) (x < 10) are more stable than the corresponding 3D structures due to the particular O-O arrangement on CeO{sub 2}(110). 3D Au{sub x} clusters across O-O-Y lines are suggested as the most stable configurations for Au{sub x}/CeO{sub 2}(110) (x ≥ 10). The present

Order parameter in CeCu{sub 2}Si{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Vieyra, Hugo A.; Brando, Manuel; Oeschler, Niels; Seiro, Silvia; Geibel, Christoph; Steglich, Frank [Max-Planck-Institute for Chemical Physics of Solids, Dresden (Germany); Jeevan, Hirale S. [I. Physikalisches Institut, Georg-August-Universitaet Goettingen (Germany); Parker, David [US Naval Research Laboratory, Washington, DC (United States)

2011-07-01

Understanding the interplay between magnetism and unconventional superconductivity remains a key challenge in solid-state physics. A clear example is the archetypical heavy-fermion compound CeCu{sub 2}Si{sub 2} which exhibits superconductivity (T{sub c}=600 mK) in the vicinity of a magnetic quantum critical point. It is believed that magnetic fluctuations mediate superconductivity and its order parameter possesses d-wave symmetry, both ideas still under debate. In this work, a high-quality single crystal with a purely superconducting ground state (S type) has been chosen to investigate the low-temperature thermal- and electric-transport characteristics of the superconducting state. Non-vanishing contributions of low-energy quasiparticle excitations to the thermal transport ({kappa}{sub 0}/T>0) suggest the presence of nodal structure in CeCu{sub 2}Si{sub 2}. In turn, angle-dependent resistivity measurements of the upper critical field H{sub c2} point towards unconventional superconductivity with d-wave symmetry of the order parameter. Theoretical calculations reveal the strong influence of Pauli paramagnetic effects and a d{sub xy} symmetry of the gap function.

Photoluminescence analysis of Ce3+:Zn2SiO4 & Li++ Ce3+:Zn2SiO4: phosphors by a sol-gel method

Science.gov (United States)

Babu, B. Chandra; Vandana, C. Sai; Guravamma, J.; Rudramadevi, B. Hemalatha; Buddhudu, S.

2015-06-01

Here, we report on the development and photoluminescence analysis of Zn2SiO4, Ce3+:Zn2SiO4 & Li+ + Ce3+: Zn2SiO4 novel powder phosphors prepared by a sol-gel technique. The total amount of Ce3+ ions was kept constant in this experiment at 0.05 mol% total doping. The excitation and emission spectra of undoped (Zn2SiO4) and Ce3+ doped Zn2SiO4 and 0.05 mol% Li+ co-doped samples have been investigated. Cerium doped Zn2SiO4 powder phosphors had broad blue emission corresponding to the 2D3/2→2FJ transition at 443nm. Stable green-yellow-red emission has been observed from Zn2SiO4 host matrix and also we have been observed the enhanced luminescence of Li+ co-doped Zn2SiO4:Ce3+. Excitation and emission spectra of these blue luminescent phosphors have been analyzed in evaluating their potential as luminescent screen coating phosphors.

4D ultrasound and 3D MRI registration of beating heart

International Nuclear Information System (INIS)

Herlambang, N.; Matsumiya, K.; Masamune, K.; Dohi, T.; Liao, H.; Tsukihara, H.; Takamoto, S.

2007-01-01

To realize intra-cardiac surgery without cardio-pulmonary bypass, a medical imaging technique with both high image quality and data acquisition rate that is fast enough to follow heart beat movements is required. In this research, we proposed a method that utilized the image quality of MRI and the speed of ultrasound. We developed a 4D image reconstruction method using image registration of 3D MRI and 4D ultrasound images. The registration method consists of rigid registration between 3D MRI and 3D ultrasound with the same heart beat phase, and non-rigid registration between 3D ultrasound images from different heart beat phases. Non-rigid registration was performed with B-spline based registration using variable spring model. In phantom experiment using balloon phantom, registration accuracy was less than 2 mm for total heart volume variation range of 10%. We applied our registration method on 3D MRI and 4D ultrasound images of a volunteer's beating heart data and confirmed through visual observation that heart beat pattern was well reproduced. (orig.)

CeO2-stabilized tetragonal ZrO2 polycrystals (Ce-TZP ceramics)

International Nuclear Information System (INIS)

Andrade Nono, M.C. de.

1990-12-01

This work presents the development and the characterization of CeO 2 -stabilized tetragonal ZrO 2 polycrystals (Ce-TZP ceramics), since it is considered candidate material for applications as structural high performance ceramics. Sintered ceramics were fabricated from mixtures of powders containing different CeO 2 content prepared by conventional and nonconventional techniques. These powders and their resultant sintered ceramics were specified by chemical and physical characterization, compactation state and mechanical properties. The chemical characteristics were determined by chemical analysis and the physical characteristics were evaluated by phase content, particle and agglomerate size and aspect, and powder porosity. (author)

Pulsed laser deposition of {CeO_2} and {Ce_{1-x}M_xO_2} (M = La, Zr): Application to insulating barrier in cuprate heterostructures

Science.gov (United States)

Berger, S.; Contour, J.-P.; Drouet, M.; Durand, O.; Khodan, A.; Michel, D.; Régi, F.-X.

1998-03-01

SrTiO_3 had been often tentatively used as an insulating barrier for HT superconductor/insulator heterostructures. Unfortunately, the deposition of SrTiO_3 on the YBa_2Cu_3O_7 inverse interface results in a poor epitaxial regrowth producing a high roughness dislocated titanate layer. Taking into account the good matching with YBa_2Cu_3O_7 and LaAlO_3, CeO_2 and Ce_{1-x}M_xO_2 (M = La, Zr), epitaxial layers were grown by pulsed laser deposition on LaAlO_3 substrates and introduced into YBa_2Cu_3O_7 based heterostructures as insulating barrier. After adjusting the growth parameters from RHEED oscillations, epitaxial growth is achieved, the oxide crystal axes being rotated by 45^circ from those of the substrate. The surface roughness of 250 nm thick films is very low with a rms value lower than 0.5 nm over 1;μ m^2. The YBa_2Cu_3O_7 layers of a YBa_2Cu_3O_7/CeO_2 /YBa_2Cu_3O_7 heterostructures grown using these optimized parameters show an independent resistive transition, when the thickness is larger than 25 nm, respectively at T_c_1 = 89.6;K and T_c_2 = 91.4;{K}. SrTiO3 est souvent utilisé comme barrière isolante dans des hétérostructures SIS de cuprates supraconducteurs, cependant les défauts générés lors de la croissance de ce titanate sur l'interface inverse de YBa2Cu3O7 conduisent à un matériau dont la qualité cristalline et les propriétés physiques sont médiocres. L'oxyde de cérium CeO2 est également une barrière isolante potentielle intéressante pour ces structures SIS basées sur YBa2Cu3O7 car cet oxyde cubique (a = 0,5411 nm, asqrt{2}/2 = 0,3825 nm) qui est peu désaccordé par rapport au plan ab du cuprate (Δ a/a = - 0,18 %, Δ b/a = 1,6 %) présente de plus un coefficient de dilatation thermique (10,6 × 10^{-6 circ}C^{-1}) très voisin de celui de YBa2Cu3O7 (13 × 10^{-6 circ}C^{-1}). Nous avons donc étudié l'épitaxie de CeO2 et des oxydes de type Ce{1-x}MxO2 (M = La, Zr) en ablation laser pulsée afin de définir des conditions de

Uncovering a new quasi-2D CuO2 plane between the YBa2Cu3O7 and CeO2 buffer layer of coated conductors

Science.gov (United States)

Li, Zhi-Xin; Cao, Jin-Jin; Gou, Xiao-Fan; Wang, Tian-Ge; Xue, Feng

2018-01-01

We report a discovery of the quasi-two-dimensional (quasi-2D) CuO2 plane between the superconductor YBa2Cu3O7 (YBCO) and CeO2 buffer layer (mostly used in the fabrication) of coated conductors through the atomistic computer simulations with the molecular dynamics (MD) and first-principle calculations. For an YBCO coated conductor with multilayer structures, the buffer layers deposited onto a substrate are mainly considered to transfer a strong biaxial texture from the substrate to the YBCO layer. To deeply understand the tuning mechanism of the texture transfer, exploring the complete atomic-level picture of the structure between the YBa2Cu3O7/CeO2 interfaces is firstly required. However, the related observation data have not been available due to some big challenges of experimental techniques. With the MD simulations, having tested the accuracy of the potential functions for the YBa2Cu3O7/CeO2 interface, we constructed a total of 54 possible atom stacking models of the interface and identified its most appropriate and stable structure according to the criterion of the interface adhesion energy and the coherent characterization. To further verify the stability of the identified structure, we performed the first-principle calculations to obtain the adhesion energy and developed the general knowledge of the interface structure. Finally, a coherent interface formed with a new built quasi-2D CuO2 plane that is structurally similar to the CuO2 plane inside bulk YBCO was determined.

Vitamin D and Heart Failure.

Science.gov (United States)

Marshall Brinkley, D; Ali, Omair M; Zalawadiya, Sandip K; Wang, Thomas J

2017-10-01

Vitamin D is principally known for its role in calcium homeostasis, but preclinical studies implicate multiple pathways through which vitamin D may affect cardiovascular function and influence risk for heart failure. Many adults with cardiovascular disease have low vitamin D status, making it a potential therapeutic target. We review the rationale and potential role of vitamin D supplementation in the prevention and treatment of chronic heart failure. Substantial observational evidence has associated low vitamin D status with the risk of heart failure, ventricular remodeling, and clinical outcomes in heart failure, including mortality. However, trials assessing the influence of vitamin D supplementation on surrogate markers and clinical outcomes in heart failure have generally been small and inconclusive. There are insufficient data to recommend routine assessment or supplementation of vitamin D for the prevention or treatment of chronic heart failure. Prospective trials powered for clinical outcomes are warranted.

New metal-organic frameworks of [M(C6H5O7)(C6H6O7)(C6H7O7)(H2O)] . H2O (M=La, Ce) and [Ce2(C2O4)(C6H6O7)2] . 4H2O

International Nuclear Information System (INIS)

Weng Shengfeng; Wang, Yun-Hsin; Lee, Chi-Shen

2012-01-01

Two novel materials, [M(C 6 H 5 O 7 )(C 6 H 6 O 7 )(C 6 H 7 O 7 )(H 2 O)] . H 2 O (M=La(1a), Ce(1b)) and [Ce 2 (C 2 O 4 )(C 6 H 6 O 7 ) 2 ] . 4H 2 O (2), with a metal-organic framework (MOF) were prepared with hydrothermal reactions and characterized with photoluminescence, magnetic susceptibility, thermogravimetric analysis and X-ray powder diffraction in situ. The crystal structures were determined by single-crystal X-ray diffraction. Compound 1 crystallized in triclinic space group P1-bar (No. 2); compound 2 crystallized in monoclinic space group P2 1 /c (No. 14). The structure of 1 is built from a 1D MOF, composed of deprotonated citric ligands of three kinds. Compound 2 contains a 2D MOF structure consisting of citrate and oxalate ligands; the oxalate ligand arose from the decomposition in situ of citric acid in the presence of Cu II ions. Photoluminescence spectra of compounds 1b and 2 revealed transitions between the 5d 1 excited state and two levels of the 4f 1 ground state ( 2 F 5/2 and 2 F 7/2 ). Compounds 1b and 2 containing Ce III ion exhibit a paramagnetic property with weak antiferromagnetic interactions between the two adjacent magnetic centers. - Graphical Abstract: [M(C 6 H 5 O 7 )(C 6 H 6 O 7 )(C 6 H 7 O 7 )(H 2 O)] . H 2 O (M=La(1a), Ce(1b)) and [Ce 2 (C 2 O 4 )(C 6 H 6 O 7 ) 2 ] . 4H 2 O (2)—with 1D and 2D structures were synthesized and characterized. Highlights: ► Two MOF – [M(C 6 H 5 O 7 )(C 6 H 6 O 7 )(C 6 H 7 O 7 )(H 2 O)] . H 2 O (M=La(1a), Ce(1b)) and [Ce 2 (C 2 O 4 )(C 6 H 6 O 7 ) 2 ] . 4H 2 O (2) – with 1D and 2D structures. ► The adjacent chains of the 1D framework were correlated with each other through an oxalate ligand to form a 2D layer structure. ► The source of the oxalate ligand was the decomposition in situ of citric acid oxidized in the presence of Cu II ions.

CeO2-ZrO2 ceramic compounds

International Nuclear Information System (INIS)

Melo, F.C.L.; Cairo, C.A.C.; Devezas, T.C.; Nono, M.C.A.

1988-01-01

In order to study the mechanical properties of tetragonal polycrystal zirconia stabilized with ceria various powder compositions with different CeO 2 content were made. Modulus of rupture for those compounds was measured. Tetragonal retained phase was determined for samples of CeO 2 -ZrO 2 ceramics with and without superficial mechanical treatment. The experimental results allowed us to evaluate the effects of CeO 2 content and sintering temperature in the mechanical properties and tetragonal transformed phase (t→ m) in ceramics of CeO 2 -ZrO 2 systems. (author) [pt

/sup 54/Fe(p vector,d)/sup 53/Fe and /sup 140/Ce(p vector,d)/sup 139/Ce reactions at 122 MeV

Energy Technology Data Exchange (ETDEWEB)

Dickey, S A; Kraushaar, J J; Shepard, J R [Colorado Univ., Boulder (USA). Nuclear Physics Lab.; Miller, D W; Jacobs, W W; Jones, W P [Indiana Univ., Bloomington (USA). Dept. of Physics

1985-08-05

The /sup 54/Fe(p vector,d)/sup 53/Fe and /sup 140/Ce(p vector,d)/sup 139/Ce reactions have been studied at a proton energy of 122 MeV. Analyzing powers and angular distributions were obtained for outgoing deuterons to the strong low-lying single-particle states in both nuclei. These data along with the data of others at 26, 29, 41, 52 and 24, 35, 55 MeV for /sup 54/Fe and /sup 140/Ce respectively, have been compared with exact-finite-range DWBA calculations carried out in a consistent fashion to determine the energy dependence of the spectroscopic factors. A strong energy dependence was noticed for the spectroscopic factors when the l-values were large.

Luminescence of a new class of UV-blue-emitting phosphors MSi2O2-deltaN2+2/3delta:Ce3+ (M = Ca, Sr, Ba)

NARCIS (Netherlands)

Li, Y.Q.; With, de G.; Hintzen, H.T.J.M.

2005-01-01

The luminescence properties of Ce3+,Na+-codoped MSi2O22dN2+2/3d (M 5 Ca, Sr, Ba) are reported. The undoped and Ce3+,Na+-codoped MSi2O22dN2+2/3d powders were prepared by a solid-state reaction at temperatures between 1300–1400 uC under N2–H2 (10%) atmosphere in the system MO–SiO2–Si3N4 (M 5 Ca, Sr,

The versatility of heart-cutting and comprehensive two-dimensional liquid chromatography in monoclonal antibody clone selection.

Science.gov (United States)

Sandra, Koen; Steenbeke, Mieke; Vandenheede, Isabel; Vanhoenacker, Gerd; Sandra, Pat

2017-11-10

In recent years, two-dimensional liquid chromatography (2D-LC) has seen an enormous evolution and one of the fields where it is being widely adopted is in the analysis of therapeutic monoclonal antibodies (mAbs). We here further add to the many flavours of this powerful technology. Workflows based on heart-cutting (LC-LC) and comprehensive (LC×LC) 2D-LC are described that allow to guide the clone selection process in mAb and biosimilar development. Combining Protein A affinity chromatography in the first dimension with size exclusion (SEC), cation exchange (CEX) or reversed-phase liquid chromatography-mass spectrometry (RPLC-MS) in the second dimension simultaneously allows to assess mAb titer and critical structural aspects such as aggregation, fragmentation, charge heterogeneity, molecular weight (MW), amino acid sequence and glycosylation. Complementing the LC-LC measurements at intact protein level with LC×LC based peptide mapping provides the necessary information to make clear decisions on which clones to take further into development. Copyright © 2017 Elsevier B.V. All rights reserved.

CYP2D6 Genetic Variation and Beta-Blocker Maintenance Dose in Patients with Heart Failure.

Science.gov (United States)

Luzum, Jasmine A; Sweet, Kevin M; Binkley, Philip F; Schmidlen, Tara J; Jarvis, Joseph P; Christman, Michael F; Sadee, Wolfgang; Kitzmiller, Joseph P

2017-08-01

This study examined whether a CYP2D6 polymorphism (CYP2D6*4) was related to beta-blocker maintenance dose in patients with heart failure. Logistic regression modeling was utilized in a retrospective chart-review analysis of heart-failure patients (60% Male, 90% of European descent) to assess whether CYP2D6*4 (non-functional CYP2D6 allele present in 1 of 5 individuals of European descent) is associated with maintenance dose of carvedilol (n = 65) or metoprolol (n = 33). CYP2D6*4 was associated with lower maintenance dose of metoprolol (OR 0.13 [95% CI 0.02-0.75] p = 0.023), and a trend was observed between CYP2D6*4 and higher maintenance dose of carvedilol (OR 2.94 [95% CI 0.84-10.30] p = 0.093). None of the patients that carried CYP2D6*4 achieved the recommended target dose of metoprolol (200 mg/day). Consistent with the role of CYP2D6 in the metabolism of metoprolol, the tolerated maintenance dose of metoprolol was lower in CYP2D6*4 carriers compared to non-carriers. Consistent with the role of CYP2D6 in activation of carvedilol, tolerated maintenance dose of carvedilol was higher in CYP2D6*4 carriers compared to non-carriers. Further investigation is warranted to ascertain the potential of CYP2D6 as a potential predictive biomarker of beta-blocker maintenance dose in heart failure patients.

Biological reduction-deposition and luminescent properties of nanostructured CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Yu, Xiaoniu [School of Materials Science and Engineering, Southeast University, Nanjing 211189 (China); Research Institute of Green Construction Materials, Southeast University, Nanjing 211189 (China); Qian, Chunxiang, E-mail: cxqian@seu.edu.cn [School of Materials Science and Engineering, Southeast University, Nanjing 211189 (China); Research Institute of Green Construction Materials, Southeast University, Nanjing 211189 (China)

2016-03-01

Nano-sized CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} with hexagonal phase have been prepared by simply varying the reactant P/Ce molar ratio in bacterial liquid. The phase composition of two samples was checked via Fourier transform infrared spectroscopy (FTIR), energy dispersive analysis of X-rays (EDS) and X-ray diffraction (XRD) analyses, displaying the presence of CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} with average crystallite size are 32.34 and 15.61 nm, respectively. The scanning electron microscopy (SEM) images show that nano-clusters and sphere-like in shape with a narrow diameter distribution were observed in two samples. The transmission electron microscopy (TEM) photographs further indicate obtained CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} nanoparticles correspond to nanosheets and nanorods, respectively. The emission spectra of CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} display a broad band of 300–380 nm range with the strongest emission at 342 nm in the violet region. - Highlights: • A new method was found to synthesize CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) and CePO{sub 4} nanoparticles. • CePO{sub 4}@NaCe(SO{sub 4}){sub 2}(H{sub 2}O) nanoparticles have good luminescent properties. • Size and luminescent properties of two samples have been studied and compared.

Physico-chemical properties of (U,Ce)O2

International Nuclear Information System (INIS)

Yamada, K.; Yamanaka, S.; Katsura, M.

1998-01-01

The high-temperature X-ray diffraction analysis of (U,Ce)O 2 with CeO 2 contents ranging from 0 to 20 mol.% CeO 2 was performed to obtain the variation of the linear thermal expansion coefficient with the CeO 2 content. Ultrasonic pulse-echo measurements were also carried out from room temperature to 673 K to estimate the change in the mechanical properties of (U,Ce)O 2 with the CeO 2 content. The variation in the linear thermal expansion coefficient at the low CeO 2 content region is more steep than that expected from the linear thermal expansion coefficient of UO 2 and CeO 2 . The Young's and shear moduli of all (U,Ce)O 2 were found to decrease with rising temperature. This was due to the increase of the bond length accompanied by the thermal expansion. Although the lattice parameter decreased with CeO 2 content, the moduli of (U,Ce)O 2 were found to decrease with increasing CeO 2 content at room temperature. These results show that in the range from 0 to 20 mol.% of CeO 2 , as CeO 2 content increases, the bottom of the potential energy in (U,Ce)O 2 is shallower and broader. (orig.)

EPR study of concentration dependence in Ce, Ce : La and Ce:Y doped SrF2

NARCIS (Netherlands)

Dankert, O.; Vainchtein, David; Datema, H.C.; den Hartog, Hendrik

1995-01-01

Experimental results of an EPR-study of the concentration dependence of the doubly integrated intensity and linewidth of the signals associated with tetragonal Ce3+-F--dipoles in Sr1-xCexF2+x, Sr-1-0.005-x Ce0.005LaxF2+0.005+x and Sr-1-0.005-x Ce0.005YxF2+0.005+x are presented. Both show a nonlinear

Peculiarities of the intermediate valence state of Ce in CeM2Si2 (M = Fe, Co, Ni) compounds

International Nuclear Information System (INIS)

Koterlyn, M.; Shcherba, I.; Yasnitskii, R.; Koterlyn, G.

2007-01-01

The results of thermoelectric power and the electrical resistivity measurements connected with the intermediate valence (IV) of Ce are presented for the compounds CeM 2 Si 2 (M = Fe, Co, Ni) in the temperature range of 4-800 K. It is shown that CeM 2 Si 2 are Kondo-lattices with the coherence scale T coh ∼ 60-80 K and the so-called single-site Kondo temperature T K ∼ 10 3 K. On the example of CeNi 2 Si 2 we have studied the changes in the structure of density of f states (f-DOS) near the Fermi energy caused by atomic substitutions. The results of structural, transport, magnetic, and Ce L III X-ray absorption spectra measurements in the series Ce 1-x La x Ni 2 Si 2 (0 ≤ x ≤ 0.6), Ce(Ni 1-y Cu y ) 2 Si 2 (0 ≤ y ≤ 0.6) and CeNi 2 (Si 1-z Ge z ) 2 (0 ≤ z ≤ 0.5) are presented. We found that the IV state of Ce in the CeM 2 Si 2 is an evidence of possible opening a wide pseudogap Δ ∼ kT K within the f-DOS structure slightly above the Fermi energy

Promoting effect of CeO 2 on cyclohexanol conversion over CeO 2

Indian Academy of Sciences (India)

Abstract. CeO2-ZnO materials were prepared by amorphous citrate process and characterized by TGA, XRD, UV-DRS and surface area measurements. TGA showed that the citrate precursors decompose in the range 350-550°C producing CeO2-containing catalytic materials. XRD and DRS results indicated the formation of ...

Two-dimensional multi-heart cutting centrifugal partition chromatography-liquid chromatography for the preparative isolation of antioxidants from Edelweiss plant.

Science.gov (United States)

Marlot, Léa; Batteau, Magali; Escofet, Marie-Claire; Nuccio, Sylvie; Coquoin, Véronique; De Vaumas, René; Faure, Karine

2017-06-30

The Edelweiss plant has been recognized as a very valuable source of anti-aging principles due to its composition of antioxidants compounds: leontopodic acid A and 3,5-dicaffeoylquinic acid. In this work, off-line multi-heart cutting CPC-LC separation was set up at industrial scale in order to isolate and produce new high quality reference material of these two antioxidants from Edelweiss. For this purpose, CPC and HPLC methods were developed and optimized at laboratory scale and a comprehensive CPCxHPLC analysis of the crude extract was established. Thereby, the CPC method led to a first separation of the target compounds according to their partition coefficient in the solvent system and the HPLC method was performed on the recovered fractions to lead to a second separation. A 2D CPCxHPLC plot was established in order to know the fractions to select at the industrial scale. Then, the CPC and HPLC methods were transferred at industrial scale and the multi-heart cutting CPC-LC was performed in off-line mode. Using CPC with methyl ter-butyl ether-water 1:1 (v/v) solvent system and LC with Denali C18 column, 2g of crude extract sample were injected and leontopodic acid A and 3,5-dicaffeoylquinic acid were recovered with purity over 97%. The compounds were identified by MS and NMR. Copyright © 2017 Elsevier B.V. All rights reserved.

Which are the cut-off values of 2D-Shear Wave Elastography (2D-SWE) liver stiffness measurements predicting different stages of liver fibrosis, considering Transient Elastography (TE) as the reference method?

Energy Technology Data Exchange (ETDEWEB)

Sporea, Ioan, E-mail: isporea@umft.ro; Bota, Simona, E-mail: bota_simona1982@yahoo.com; Gradinaru-Taşcău, Oana, E-mail: bluonmyown@yahoo.com; Şirli, Roxana, E-mail: roxanasirli@gmail.com; Popescu, Alina, E-mail: alinamircea.popescu@gmail.com; Jurchiş, Ana, E-mail: ana.jurchis@yahoo.com

2014-03-15

Introduction: To identify liver stiffness (LS) cut-off values assessed by means of 2D-Shear Wave Elastography (2D-SWE) for predicting different stages of liver fibrosis, considering Transient Elastography (TE) as the reference method. Methods: Our prospective study included 383 consecutive subjects, with or without hepatopathies, in which LS was evaluated by means of TE and 2D-SWE. To discriminate between various stages of fibrosis by TE we used the following LS cut-offs (kPa): F1-6, F2-7.2, F3-9.6 and F4-14.5. Results: The rate of reliable LS measurements was similar for TE and 2D-SWE: 73.9% vs. 79.9%, p = 0.06. Older age and higher BMI were associated for both TE and 2D-SWE with the impossibility to obtain reliable LS measurements. Reliable LS measurements by both elastographic methods were obtained in 65.2% of patients. A significant correlation was found between TE and 2D-SWE measurements (r = 0.68). The best LS cut-off values assessed by 2D-SWE for predicting different stages of liver fibrosis were: F ≥ 1: >7.1 kPa (AUROC = 0.825); F ≥ 2: >7.8 kPa (AUROC = 0.859); F ≥ 3: >8 kPa (AUROC = 0.897) and for F = 4: >11.5 kPa (AUROC = 0.914). Conclusions: 2D-SWE is a reliable method for the non-invasive evaluation of liver fibrosis, considering TE as the reference method. The accuracy of 2D-SWE measurements increased with the severity of liver fibrosis.

Morphologically controlled synthesis, structural and optical properties of CeO2/SnO2 nanocomposites

Directory of Open Access Journals (Sweden)

S. Usharani

2017-09-01

Full Text Available CeO2/SnO2 nanocomposites with different dimensional nanostructures were synthesized by a wet chemical method, using various surfactants such as SDS, CTAB and Triton X-100. The prepared CeO2/SnO2 samples were analyzed by X-ray diffraction (XRD, Fourier transform infrared (FTIR, Transmission electron microscopy (TEM, UV-Diffuse Reflectance Spectroscopy (UV-DRS, and Photoluminescence (PL spectroscopy. The XRD patterns reveal the presence of a mixed phase of SnO2 and CeO2; The TEM analysis showed the mixed morphology of uniformly dispersed spherical with ellipsoidal shape in the SDS assisted CeO2/SnO2 nanocomposites; whereas the nanostructure with spherical with hexagonal shapes was observed for the Triton X-100 assisted CeO2/SnO2 nanocomposites. The one dimensional (1D nanorod like structure observed for the CTAB assisted CeO2/SnO2 nanocomposites shows CTAB acting as a face-specific capping agent to form rod-shaped micelles. The room temperature photoluminescence emission studies of the CeO2/SnO2 nanocomposites showed strong peaks in the UV region, and several peaks in the visible region, which are likely to have originated from the oxygen vacancies and are potential materials for optoelectronic device applications. The UV results showed the absorption edges shifted to a high energy region and the blue shifts that occurred in all the samples.

Luminescence of Ce3+ doped LaPO4 nanophosphors upon Ce3+ 4f-5d and band-to-band excitation

International Nuclear Information System (INIS)

Stryganyuk, G.; Trots, D.M.; Voloshinovskii, A.; Shalapska, T.; Zakordonskiy, V.; Vistovskyy, V.; Pidzyrailo, M.; Zimmerer, G.

2008-01-01

Luminescence spectral-kinetic studies have been performed for pure and Ce-doped LaPO 4 micro- and nanosized phosphates using synchrotron radiation for the excitation within 5-20 eV energy range at T=8-300 K. Mechanisms for the excitation of Ce 3+ 5d-4f emission as well as the quenching processes are discussed. The influence of surface defects has been considered to modify considerably the luminescent properties of nanosized phosphors upon the excitation in the energy range of Ce 3+ 4f-5d transitions and LaPO 4 host absorption

Comparison of tool life and surface roughness with MQL, flood cooling, and dry cutting conditions with P20 and D2 steel

Science.gov (United States)

Senevirathne, S. W. M. A. I.; Punchihewa, H. K. G.

2017-09-01

Minimum quantity lubrication (MQL) is a cutting fluid (CF) application method that has given promising results in improving machining performances. It has shown that, the performance of cutting systems, depends on the work and tool materials used. AISI P20, and D2 are popular in tool making industry. However, the applicability of MQL in machining these two steels has not been studied previously. This experimental study is focused on evaluating performances of MQL compared to dry cutting, and conventional flood cooling method. Trials were carried out with P20, and D2 steels, using coated carbides as tool material, emulsion cutting oil as the CF. Tool nose wear, and arithmetic average surface roughness (Ra) were taken as response variables. Results were statistically analysed for differences in response variables. Although many past literature has suggested that MQL causes improvements in tool wear, and surface finish, this study has found contradicting results. MQL has caused nearly 200% increase in tool nose wear, and nearly 11-13% increase in surface roughness compared flood cooling method with both P20 and D2. Therefore, this study concludes that MQL affects adversely in machining P20, and D2 steels.

Optical and scintillation characteristics of Gd.sub.2./sub.YAl.sub.2./sub.Ga.sub.3./sub.O.sub.12./sub.:Ce and Lu.sub.2./sub.YAl.sub.2./sub.Ga.sub.3./sub.O.sub.12./sub.:Ce single crystals

Czech Academy of Sciences Publication Activity Database

Chewpraditkul, W.; Sakthong, O.; Pattanaboonmee, N.; Chewpraditkul, We.; Szczesniak, T.; Swiderski, L.; Moszynski, M.; Kamada, K.; Yoshikawa, A.; Nikl, Martin

2017-01-01

Roč. 468, Jun (2017), 395–398 ISSN 0022-0248 R&D Projects: GA ČR GA16-15569S Institutional support: RVO:68378271 Keywords : Ce-doping * Czochralski method * Gd 2 YAl 2 Ga 3 O 12 :Ce * Lu 2 YAl 2 Ga 3 O 12 :Ce * luminescence * scintillator materials Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 1.751, year: 2016

Scintillation timing characteristics of (La,Gd).sub.2./sub.Si.sub.2./sub.O.sub.7./sub.:Ce and Gd.sub.2./sub.SiO.sub.5./sub.:Ce single crystal scintillators: A comparative study

Czech Academy of Sciences Publication Activity Database

Chewpraditkul, W.; Sakthong, O.; Chewpraditkul, Wa.; Yawai, N.; Szczesniak, T.; Swiderski, L.; Moszynski, M.; Kurosawa, S.; Murakami, R.; Horiai, T.; Yoshikawa, A.; Nikl, Martin

2016-01-01

Roč. 92, Sep (2016), s. 49-53 ISSN 1350-4487 R&D Projects: GA MŠk(CZ) LH14266 Institutional support: RVO:68378271 Keywords : coincidence time resolution * energy resolution * (La,Gd) 2 Si 2 O 7 :Ce * Gd 2 SiO 5 :Ce * scintillation decays Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.442, year: 2016

Magnetic behaviour of cerium in Ce2 Sn5 and Ce3 Sn7, surstructures of Ce Sn3

International Nuclear Information System (INIS)

Stunault, A.

1988-07-01

The compound studied, Ce 2 Sn 5 and Ce 3 Sn 7 are both orthorhombic, surstructure of cubic Ce Sn 3 . Magnetic susceptibility measurements show in both compounds an antiferromagnetic order at low temperature and magnetization shows a high anisotropy. Magnetization densities are determined by polarized neutron diffraction. The cerium site which has two Ce atoms as nearest neighbourgs carries all the magnetism in both structures. For Ce 2 Sn 5 moments are directed as the high magnetization axis and structure is modulated. Ce 3 Sn 7 presents a simple antiferromagnetic order but moment are directed as low magnetization axis. Various transitions towards a ferromagnetic order are presented. Results are interpreted by measuring the difference between energy levels of crystalline field. A model of crystalline field and isotrope exchange agrees well with Ce 3 Sn 7 , but for Ce 2 Sn 7 it is necessary to reduce the magnetic moment which is typical of the Kondo effect [fr

Comment on “Synthesis of ceria (CeO_2 and CeO_2_−_x) nanoparticles via decarbonation and Ce(III) oxidation of synthetic bastnaesite (CeCO_3F)” by Montes-Hernandez et al

International Nuclear Information System (INIS)

Gysi, Alexander P.; Williams-Jones, Anthony E.

2016-01-01

Montes-Hernandez et al. [5] recently reported results of a study of the decarbonation of fine-grained synthetic bastnäsite-(Ce) precipitates involving the oxidation of Ce(III) to Ce(IV) and the formation of ceria (CeO_2 and CeO_2_-_x with oxygen vacancies) nano-particles. The purpose of their study was to show that oxidation of Ce(III) to Ce(IV) occurs spontaneously during heating of bastnäsite-(Ce) in air, a vacuum, N_2 or Ar gas. However, their interpretation of the formation of CeO_2 is not supported by the findings of Gysi and Williams-Jones [3], who showed that natural bastnäsite-(Ce) decomposes to form rare earth element (REE) oxyfluorides (REEOF). The latter was documented using differential scanning calorimetric (DSC) and thermogravimetric (TGA) experiments under a deoxygenated N_2 atmosphere. In their experiments, Gysi and Williams-Jones [3] found no evidence for the oxidation of Ce(III) to Ce(IV). This raises the question of whether the experiments of Montes-Hernandez et al. [5] in a N_2 atmosphere (and by extension in an Ar atmosphere) were compromised because of contamination by O_2 and that, as a result, they reached the erroneous conclusion that Ce(III) oxidizes spontaneously to Ce(IV) during heating of bastnäsite-(Ce) under these conditions. In order to explain the disagreement between their findings and those of Gysi and Williams-Jones [3], Montes-Hernandez et al. [5], proposed that the X-ray diffraction data of the former study were incorrectly interpreted. Here, we provide further evidence that the natural bastnäsite-(Ce) employed in the study by Gysi and Williams-Jones [3] decomposed to form REE oxyfluorides (i.e., CeOF, LaOF, PrOF and NdOF) and not CeO_2, and supply explanations for why Montes-Hernandez et al. [5] erroneously concluded that CeO_2 is produced during decomposition of this mineral under N_2 and Ar atmospheres. In so doing, we hope to provide new insights into the decomposition of bastnäsite-(Ce) that will help guide future

CO oxidation catalyzed by ag nanoparticles supported on SnO/CeO2

KAUST Repository

Khan, Inayatali; Sajid, Nida K M; Badshah, Amin; Wattoo, Muhammad Hamid Sarwar; Anjum, Dalaver H.; Nadeem, Muhammad Amtiaz

2015-01-01

by the XRD technique due to sintering inside the 3D array channels of CeO2 during the calcination process. The Ag-Sn/CeO2 (4%) catalyst was the most efficient and exhibited 100% CO oxidation at 100 °C due to small particle size and strong electronic

Performance of cubic ZrO{sub 2} doped CeO{sub 2}: First-principles investigation on elastic, electronic and optical properties of Ce{sub 1−x} Zr{sub x}O{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Tian, Dong [State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming 650093, Yunnan (China); Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, Yunnan (China); Zeng, Chunhua, E-mail: zchh2009@126.com [State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming 650093, Yunnan (China); Faculty of Science, Kunming University of Science and Technology, Kunming 650093, Yunnan (China); Wang, Hua, E-mail: wanghuaheat@hotmail.com [State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming 650093, Yunnan (China); Luo, Hongchun [Faculty of Science, Kunming University of Science and Technology, Kunming 650093, Yunnan (China); Cheng, Xianming [State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming 650093, Yunnan (China); Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, Yunnan (China); Xiang, Chao [College of Mechanical and Electrical Engineering, Yangtze Normal University, Fuling 408100, Chongqing (China); Wei, Yonggang; Li, Kongzhai; Zhu, Xing [State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming 650093, Yunnan (China); Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, Yunnan (China)

2016-06-25

The structural, elastic, electronic and optical properties of Ce{sub 1−x} Zr{sub x}O{sub 2} (x = 0, 0.25, 0.5, 0.75, 1) fluorite type oxides are studied by researchers using the method of density functional theory (DFT) + U method. The calculated equilibrium lattice parameter, cell volume, elastic and optical properties for CeO{sub 2} and ZrO{sub 2} are all in good agreement with the available experimental data and other theoretical results. It is found that Ce substituted by Zr leads to the formation of the pseudo-cubic fluorite-type structure. With doping concentration × increasing, the lattice parameter, cell volume and the bond length of d{sub Ce−O} and d{sub Zr−O} decrease linearly. It is interesting to find that the hardness of materials increase with Zr concentration increasing. For Ce{sub 0.75} Zr{sub 0.25} O{sub 2}, we also find that its ductility is good. Meanwhile, the range of the conduction band energy in the doped system becomes wider than that in the undoped system. The overlapping band phenomenon occur for all substitutions in Ce{sub 1−x} Zr{sub x}O{sub 2} (from x = 0.25 to x = 0.75), especially for the structure of Ce{sub 0.5} Zr{sub 0.5} O{sub 2} and Ce{sub 0.25} Zr{sub 0.75} O{sub 2}, its second band gaps almost disappear. Based on the dielectric functions obtained, it is shown that the static dielectric constant ε{sub 0} and refractive index n{sub 0} obviously decrease with Zr concentration increasing. After discussing, we know that CeO{sub 2} is suitable as a useful high-refractive index film material in single and multilayered optical coatings, whereas ZrO{sub 2} can be used as gate-dielectric materials in metal-oxide semiconductor (MOS) devices, in metallurgy and as a thermal barrier coating in engines. - Highlights: • Structural, and optical properties of fluorite type oxides are studied; • Ce substituted by Zr leads to formation of pseudo-cubic fluorite-type structure; • Hardness of materials are increased with Zr

Exposure of agricultural crops to nanoparticle CeO2 in biochar-amended soil.

Science.gov (United States)

Servin, Alia D; De la Torre-Roche, Roberto; Castillo-Michel, Hiram; Pagano, Luca; Hawthorne, Joseph; Musante, Craig; Pignatello, Joseph; Uchimiya, Minori; White, Jason C

2017-01-01

Biochar is seeing increased usage as an amendment in agricultural soils but the significance of nanoscale interactions between this additive and engineered nanoparticles (ENP) remains unknown. Corn, lettuce, soybean and zucchini were grown for 28 d in two different soils (agricultural, residential) amended with 0-2000 mg engineered nanoparticle (ENP) CeO 2  kg -1 and biochar (350 °C or 600 °C) at application rates of 0-5% (w/w). At harvest, plants were analyzed for biomass, Ce content, chlorophyll and lipid peroxidation. Biomass from the four species grown in residential soil varied with species and biochar type. However, biomass in the agricultural soil amended with biochar 600 °C was largely unaffected. Biochar co-exposure had minimal impact on Ce accumulation, with reduced or increased Ce content occurring at the highest (5%) biochar level. Soil-specific and biochar-specific effects on Ce accumulation were observed in the four species. For example, zucchini grown in agricultural soil with 2000 mg CeO 2  kg -1 and 350 °C biochar (0.5-5%) accumulated greater Ce than the control. However, for the 600 °C biochar, the opposite effect was evident, with decreased Ce content as biochar increased. A principal component analysis showed that biochar type accounted for 56-99% of the variance in chlorophyll and lipid peroxidation across the plants. SEM and μ-XRF showed Ce association with specific biochar and soil components, while μ-XANES analysis confirmed that after 28 d in soil, the Ce remained largely as CeO 2 . The current study demonstrates that biochar synthesis conditions significantly impact interactions with ENP, with subsequent effects on particle fate and effects. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Experimental and theoretical study about sulfur deactivation of Ni/ CeO{sub 2} and Rh/CeO{sub 2} catalysts

Energy Technology Data Exchange (ETDEWEB)

Ocsachoque, Marco A., E-mail: ocmarco@quimica.unlp.edu.ar [Centro de Investigación y Desarrollo en Ciencias Aplicadas “Dr Jorge J. Ronco”, (CONICET, CCT La Plata), Departamento de Química, Facultad de Cs Exactas (UNLP), Calle 48 N° 257, 1900 La Plata (Argentina); Eugenio Russman, Juan I.; Irigoyen, Beatriz [Instituto de Tecnologías del Hidrógeno y Energías Sostenibles (ITHES), Departamento de Ingeniería Química, Facultad de Ingeniería (UBA), Buenos Aires (Argentina); Gazzoli, Delia [Dipartimento di Chimia, Universitá di Roma “La Sapienza”, Roma (Italy); González, María G. [Centro de Investigación y Desarrollo en Ciencias Aplicadas “Dr Jorge J. Ronco”, (CONICET, CCT La Plata), Departamento de Química, Facultad de Cs Exactas (UNLP), Calle 48 N° 257, 1900 La Plata (Argentina)

2016-04-01

Sulfur deactivation of Ni/CeO{sub 2} and Rh/CeO{sub 2} catalysts were examined through an experimental and theoretical study. These catalysts were characterized by N{sub 2} adsorption, X-ray diffraction, temperature programmed reaction, thermogravimetric analysis, Uv–visible spectroscopy and Raman spectroscopy, and tested under the methane dry reforming reaction in the presence of H{sub 2}S. On the other hand, different possible interactions of sulfur with Rh, Ni or surface sites of the CeO{sub 2} support were evaluated by performing energy calculations with the density functional theory (DFT). Overall, the results indicate that tolerance to sulfur of Rh/CeO{sub 2} catalyst is higher than that of Ni/CeO{sub 2} one. In this sense, TPR measurements show that reduction of CeO{sub 2} is promoted by the presence of Rh. This effect, probably caused by hydrogen spillover to CeO{sub 2} support during the reduction of RhO{sub x} species, could be linked to a high oxygen donation capacity of Rh/CeO{sub 2} catalysts. Accordingly, the O{sup 2−} species existing on Rh/CeO{sub 2} catalysts, revealed by Raman spectra of these samples, could favor sulfur oxidation and prevent Rh–S interactions. Likewise, the theoretical calculations show that desorption of S–O species from Rh/CeO{sub 2} system is more favorable than that from Ni/CeO{sub 2} one. Therefore, our experimental and theoretical study about sulfur deactivation of Ni and Rh supported on CeO{sub 2} allow us to postulate that Rh can help to desorb SO{sub x} species formed on the support, retarding sulfur poisoning of the Rh/CeO{sub 2} catalysts. - Highlights: • CeO{sub 2} support can act as a sacrifice trap decreasing sulfur poisoning. • Theoretical calculations indicate an important nickel affinity with sulfur. • Rh would favor desorption of S–O species formed on the support. • The O{sup 2−} species present on the Rh–CeO{sub 2} sample favor sulfur removal.

Vitamin D-3 and 25-hydroxyvitamin D-3 in raw and cooked pork cuts

DEFF Research Database (Denmark)

Clausen, Ina; Jakobsen, Jette; Leth, Torben

2003-01-01

The contents of vitamin D-3 and its metabolically active metabolite 25-hydroxyvitamin D-3 (25OHD(3)) were examined by HPLC in different parts of four common raw pork cuts (loin boneless, leg inside, thin belly, neck) and in cooked meat (loin boneless). In whole raw pork cuts, varying in fat content......, and that rind, despite its limited fat content, has a high concentration of vitamin D-3 and 25OHD(3). Cooking increased vitamin D-3 and 25OHD(3) calculated per 100 g of tissue in all parts and in the whole cut (in whole cuts in raw and cooked meat, respectively: vitamin D-3: 0.15 (0.08-0.24) mug/100 g and 0...... 25OHD(3) contributes significantly to vitamin D activity. Food databases should include concentrations of both vitamin D and 25OHD(3). (C) 2003 Elsevier Ltd. All rights reserved....

ROS mediated malignancy cure performance of morphological, optical, and electrically tuned Sn doped CeO2 nanostructures

Science.gov (United States)

Abbas, Fazal; Iqbal, Javed; Maqbool, Qaisar; Jan, Tariq; Ullah, Muhammad Obaid; Nawaz, Bushra; Nazar, Mudassar; Naqvi, M. S. Hussain; Ahmad, Ishaq

2017-09-01

To grapple with cancer, implementation of differentially cytotoxic nanomedicines have gained prime attention of the researchers across the globe. Now, ceria (CeO2) at nanoscale has emerged as a cut out therapeutic agent for malignancy treatment. Keeping this in view, we have fabricated SnxCe1-xO2 nanostructures by facile, eco-friendly, and biocompatible hydrothermal method. Structural examinations via XRD and FT-IR spectroscopy have revealed single phase cubic-fluorite morphology while SEM analysis has depicted particle size ranging 30-50nm for pristine and doped nanostructures. UV-Vis spectroscopy investigation explored that Sn doping significantly tuned the band gap (eV) energies of SnxCe1-xO2 nanostructures which set up the base for tremendous cellular reactive oxygen species (ROS) generations involved in cancer cells' death. To observe cytotoxicity, synthesized nanostructures were found selectively more toxic to neuroblastoma cell lines as compared to HEK-293 healthy cells. This study anticipates that SnxCe1-xO2 nanostructures, in future, might be used as nanomedicine for safer cancer therapy.

ROS mediated malignancy cure performance of morphological, optical, and electrically tuned Sn doped CeO2 nanostructures

Directory of Open Access Journals (Sweden)

Fazal Abbas

2017-09-01

Full Text Available To grapple with cancer, implementation of differentially cytotoxic nanomedicines have gained prime attention of the researchers across the globe. Now, ceria (CeO2 at nanoscale has emerged as a cut out therapeutic agent for malignancy treatment. Keeping this in view, we have fabricated SnxCe1-xO2 nanostructures by facile, eco-friendly, and biocompatible hydrothermal method. Structural examinations via XRD and FT-IR spectroscopy have revealed single phase cubic-fluorite morphology while SEM analysis has depicted particle size ranging 30-50nm for pristine and doped nanostructures. UV-Vis spectroscopy investigation explored that Sn doping significantly tuned the band gap (eV energies of SnxCe1-xO2 nanostructures which set up the base for tremendous cellular reactive oxygen species (ROS generations involved in cancer cells’ death. To observe cytotoxicity, synthesized nanostructures were found selectively more toxic to neuroblastoma cell lines as compared to HEK-293 healthy cells. This study anticipates that SnxCe1-xO2 nanostructures, in future, might be used as nanomedicine for safer cancer therapy.

Ca2 Al2 SiO7 :Ce3+ phosphors for mechanoluminescence dosimetry.

Science.gov (United States)

Tiwari, Geetanjali; Brahme, Nameeta; Sharma, Ravi; Bisen, D P; Sao, Sanjay Kumar; Sahu, Ishwar Prasad

2016-12-01

A series of Ce 3+ ion single-doped Ca 2 Al 2 SiO 7 phosphors was synthesized by a combustion-assisted method at an initiating temperature of 600 °C. The samples were annealed at 1100 °C for 3 h and their X-ray diffraction patterns confirmed a tetragonal structure. The phase structure, particle size, surface morphology and elemental analysis were analyzed using X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy techniques. Thermoluminescence (TL) intensity increased with increase in ultraviolet (UV) light exposure time up to 15 min. With further increase in the UV irradiation time the TL intensity decreases. The increase in TL intensity indicates that trap concentration increased with UV exposure time. A broad peak at 121 °C suggested the existence of a trapping level. The peak of mechanoluminescence (ML) intensity versus time curve increased linearly with increasing impact velocity of the moving piston. Mechanoluminescence intensity increased with increase in UV irradiation time up to 15 min. Under UV-irradiation excitation, the TL and ML emission spectra of Ca 2 Al 2 SiO 7 :Ce 3+ phosphor showed the characteristic emission of Ce 3+ peaking at 400 nm (UV-violet) and originating from the Ce 3+ transitions of 5d-4f ( 2 F 5/2 and 2 F 7/2 ). The photoluminescence (PL) emission spectra for Ca 2 Al 2 SiO 7 :Ce 3+ were similar to the ML/TL emission spectra. The mechanism of ML excitation and the suitability of the Ca 2 Al 2 SiO 7 :Ce 3+ phosphor for radiation dosimetry are discussed. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Function and expression differences between ergot and non-ergot dopamine D2 agonists on heart valve interstitial cells.

Science.gov (United States)

Oana, Fumiki; Onozuka, Hiroshi; Tsuchioka, Akihiro; Suzuki, Takayuki; Tanaka, Nobuyuki; Kaidoh, Kouichi; Hoyano, Yuji; Hiratochi, Masahiro; Kikuchi, Shinji; Takehana, Yasuo; Shibata, Nobuo

2014-03-01

The symptoms of Parkinson's disease are alleviated by dopamine D2 agonists, which are classified as ergot dopamine D2 agonists and non-ergot D2 agonists. Among the former, pergolide has been associated with valvular heart disease, since it has both potent D2 receptor and serotonin 5-HT(2B) receptor agonistic properties. Among the latter, pramipexole has few incidences of heart valve disease onset, since it has an absence of 5-HT(2B) receptor agonism. A [3H]thymidine incorporation assay was performed to monitor function, and microarray global analysis to monitor gene expression, on porcine heart valve interstitial cells (VICs) treated with pergolide or pramipexole. The 5-HT(2B) receptor was abundantly expressed in porcine VICs. The 5-HT(2B) receptor agonist pergolide induced an increase in [3H]thymidine incorporation, accompanied by a decrease in 5-HT(2B) receptor mRNA expression. [3H]thymidine incorporation was blocked by lisuride, a 5-HT(2B) receptor antagonist, and also by LY-294002, a specific inhibitor of PI3K and Akt. Moreover, type 2 iodothyronine deiodinase (Dio2) expression in porcine VICs treated with pergolide was shown, by a global analysis of mRNA, to be markedly increased compared to that induced by pramipexole. Such changes in VICs may correlate with the mechanism of heart valve disease pathogenesis. There were substantial differences (increased [3H]thymidine incorporation, and Dio2 expression) between pergolide and pramipexole, which might correlate with the mechanism of heart valve disease onset.

Bio diesel synthesis from pongamia pinnata oil over modified CeO2 catalysts

International Nuclear Information System (INIS)

Venkatesh; Sathgatta Z, M. S.; Manjunatha, S.; Thammannigowda V, V.

2014-01-01

This study investigates the use of CeO 2 , ZrO 2 , Mg O and CeO 2 -ZrO 2 , CeO 2 -Mg O, CeO 2 -ZrO 2 -Mg O mixed oxides as solid base catalysts for the transesterification of Pongamia pinnata oil with methanol to produce bio diesel. SO 4 2- /CeO 2 and SO 4 2- /CeO 2 -ZrO 2 were also prepared and used as solid acid catalysts for esterification of Pongamia pinnata oil (P-oil) to reduce the % of free fatty acid (FFA) in P-oil. The oxide catalysts were prepared by an incipient wetness impregnation method and characterized by techniques such as NH 3 -Tpd for surface acidity, CO 2 -Tpd for surface basicity and powder X-ray diffraction for crystallinity. The effect of nature of the catalyst, methanol to P-oil molar ratio and reaction time in esterification as well as in transesterification was investigated. The catalytic materials were reactive d and reused for five reaction cycles and the results showed that the ceria based catalysts have reasonably good reusability both in esterification and transesterification reaction. The test results also revealed that the CeO 2 -ZrO 2 modified with Mg O could have potential for use in the large scale bio diesel production. (Author)

RRh2Al10 (R = Ce, Yb): New intermetallic compounds in the 1 : 2 : 10 stoichiometry series

Science.gov (United States)

Strydom, A. M.; Djoumessi, R. F.; Blinova, M.; Tursina, A.; Nesterenko, S.; Avzuragova, V.

2018-05-01

The orthorhombic, space group Cmcm YbFe2Al10 structure type series of compounds are known to form with practically the entire series of rare-earth elements R, but only with the three d - electron elements Fe, Ru, and Os. The Ce-derivatives in particular have been of much interest since the first reports of their highly unusual physical properties. Classified as Kondo insulators, CeRu2Al10 and CeOs2Al10 controversially order magnetically and with uncharacteristically high Néel temperatures of ≃ 28 K. CeFe2Al10 on the other hand shows pronounced semiconducting and Kondo features but remains paramagnetic. As part of our ongoing studies into the rich physics of this class of materials we have succeeded in synthesizing new members of the 1:2:10 stoichiometry involving the chemical element Rh for the first time. CeRh2Al10 is found to crystallize in the tetragonal system with space group I41 / amd . Yb Rh2Al10 on the other hand forms in the serial Cmcm orthorhombic structure type. We discuss important similarities between the two types. At 5.310 Å the shortest Ce-Ce distance is, likewise to the situation in CeRu2Al10 and CeOs2Al10 , also well above the Hill limit of 3.40 Å. Despite the cage-like structure and large rare-earth separation distances, this study reveals the onset of long-range magnetic ordering in CeRh2Al10 at 3.9 K. The magnetic ordering develops out of an incoherent Kondo state that dominates the electrical resistivity below about 40 K.

A comparative study of the magnetization in transition metal ion doped CeO2, TiO2 and SnO2 nanoparticles

Science.gov (United States)

Apostolov, A. T.; Apostolova, I. N.; Wesselinowa, J. M.

2018-05-01

Using the microscopic s-d model taking into account anharmonic spin-phonon interactions we have studied the magnetic properties of Co and Cu ion doped CeO2 and TiO2 nanoparticles and compared them with those of SnO2. By Co-doping there is a maximum in the magnetization M(x) curve for all nanoparticles observed in the most transition metal doped ones. The s-d interaction plays an important role by the decrease of M at higher dopant concentration. We have discussed the magnetization in dependence of different model parameters. By small Cu-ion doping there are some differences. In CeO2M decreases with the Cu-concentration, whereas in TiO2 and SnO2M increases. For higher Cu dopant concentrations M(X) decreases in TiO2 nanoparticles. We obtain room temperature ferromagnetism also in Zn doped CeO2, TiO2 and SnO2 nanoparticles, i.e. in non-transition metal ion doped ones. The different behavior of M in Co and Cu doped nanoparticles is due to a combination effect of multivalent metal ions, oxygen vacancies, different radius of cation dopants, connection between lattice and magnetism, as well as competition between the s-d and d-d ferromagnetic or antiferromagnetic interactions.

LASER CUTTING MACHINES FOR 3-D THIN SHEET PARTS

Directory of Open Access Journals (Sweden)

Miroslav RADOVANOVIC

2012-11-01

Full Text Available Laser cutting machines are used for precise contour cutting thin sheet. In industrial application nowadays various types and construction of laser cutting machines can be met. For contour cutting 3-D thin sheet parts laser cutting machines with rotation movements and laser robots are used. Laser generates the light beam, that presents a tool in working process. Application of laser cutting machines made possible good quality of products, flexibility of production and enlargement of economy

Restraining and neck cutting or stunning and neck cutting of veal calves.

Science.gov (United States)

Lambooij, E; van der Werf, J T N; Reimert, H G M; Hindle, V A

2012-05-01

Brain and heart activities were measured in 31 veal calves during restraining and rotating followed by neck cutting with or without stunning to evaluate welfare. After neck cutting correlation dimension analyses and %power of EEG beta wave fraction decreased gradually to lower values resulting in an induction of unconsciousness lasting on average 80s. Corneal reflex response ceased 135±57s after neck cutting. The CD scores and the %power of beta waves fell immediately after post-cut captive bolt and pre-cut electrical stunning to levels indicating unconsciousness. Heart rate in lairage increased upon entrance to the restrainer and again after rotation, heart rate variability decreased. Rotating the restrainer 90°, 120° or 180° compromised veal calf welfare and should be avoided. It is recommended to use post-cut captive bolt stunning or pre-cut electrical stunning inducing immediate unconsciousness. Copyright © 2011 Elsevier Ltd. All rights reserved.

Comparative evaluation of cyclic fatigue resistance of D-RaCe and ProTaper retreatment instruments in curved artificial canals.

Science.gov (United States)

Topçuoğlu, H S; Topçuoğlu, G; Aktı, A

2016-06-01

To compare the cyclic fatigue resistance of D-RaCe and ProTaper rotary nickel-titanium (NiTi) retreatment files when used in curved artificial canals. A total of 120 new D-RaCe DR2 and ProTaper D3 retreatment files were tested in stainless steel artificial canals having 45° and 60° angles of curvature. Thirty instruments of each of the file systems were tested in both angles of curvature (n = 30). The retreatment instruments were rotated until fracture to calculate the number of cycles to failure. The length of each fractured fragment was recorded. Data were analysed by independent sample t-test. Fractured surfaces of the instruments were analysed by scanning electron microscopy. In the canal with 45° angle of curvature, no significant difference was observed between the retreatment systems (P > 0.05); on the other hand, in the canal with 60° angle of curvature, D-RaCe DR2 instruments had greater cyclic fatigue resistance than ProTaper D3 (P  0.05). The fracture surfaces of the instruments had morphologic characteristics of ductile fracture. D-RaCe DR2 instrument exhibited greater cyclic fatigue resistance than ProTaper D3 only in root canals with 60° angle of curvature. © 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Comment on “Synthesis of ceria (CeO{sub 2} and CeO{sub 2−x}) nanoparticles via decarbonation and Ce(III) oxidation of synthetic bastnaesite (CeCO{sub 3}F)” by Montes-Hernandez et al

Energy Technology Data Exchange (ETDEWEB)

Gysi, Alexander P., E-mail: agysi@mines.edu [Department of Geology and Geological Engineering, Colorado School of Mines, 1516 Illinois Street, Golden, CO, 80401 (United States); Williams-Jones, Anthony E. [Department of Earth and Planetary Sciences, McGill University, 3450 University Street, Montreal, QC, Canada, H3A 2A7 (Canada)

2016-11-01

Montes-Hernandez et al. [5] recently reported results of a study of the decarbonation of fine-grained synthetic bastnäsite-(Ce) precipitates involving the oxidation of Ce(III) to Ce(IV) and the formation of ceria (CeO{sub 2} and CeO{sub 2-x} with oxygen vacancies) nano-particles. The purpose of their study was to show that oxidation of Ce(III) to Ce(IV) occurs spontaneously during heating of bastnäsite-(Ce) in air, a vacuum, N{sub 2} or Ar gas. However, their interpretation of the formation of CeO{sub 2} is not supported by the findings of Gysi and Williams-Jones [3], who showed that natural bastnäsite-(Ce) decomposes to form rare earth element (REE) oxyfluorides (REEOF). The latter was documented using differential scanning calorimetric (DSC) and thermogravimetric (TGA) experiments under a deoxygenated N{sub 2} atmosphere. In their experiments, Gysi and Williams-Jones [3] found no evidence for the oxidation of Ce(III) to Ce(IV). This raises the question of whether the experiments of Montes-Hernandez et al. [5] in a N{sub 2} atmosphere (and by extension in an Ar atmosphere) were compromised because of contamination by O{sub 2} and that, as a result, they reached the erroneous conclusion that Ce(III) oxidizes spontaneously to Ce(IV) during heating of bastnäsite-(Ce) under these conditions. In order to explain the disagreement between their findings and those of Gysi and Williams-Jones [3], Montes-Hernandez et al. [5], proposed that the X-ray diffraction data of the former study were incorrectly interpreted. Here, we provide further evidence that the natural bastnäsite-(Ce) employed in the study by Gysi and Williams-Jones [3] decomposed to form REE oxyfluorides (i.e., CeOF, LaOF, PrOF and NdOF) and not CeO{sub 2}, and supply explanations for why Montes-Hernandez et al. [5] erroneously concluded that CeO{sub 2} is produced during decomposition of this mineral under N{sub 2} and Ar atmospheres. In so doing, we hope to provide new insights into the decomposition of

Metallic oxides supported in CeO{sub 2} and CeO{sub 2}-La{sub 2} O{sub 3} for low temperature shift reaction; Oxidos metalicos suportados em CeO{sub 2} e CeO{sub 2}-La{sub 2} O{sub 3} para reacao shift a baixa temperatura

Energy Technology Data Exchange (ETDEWEB)

Maluf, Silvia Salua; Assaf, Elisabete Moreira [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Inst. de Quimica]. E-mail: sil_maluf@iqsc.usp.br

2008-07-01

This work studied copper and zinc oxides supported in CeO{sub 2} and CeO{sub 2}/La{sub 2}O{sub 3}. The catalytic tests for low temperature shift reaction, carried out for samples, showed the Cu-Ce catalyst presents the highest value of CO conversion (50%) and after the Cu-Ce-La catalysts (30%). The other catalysts showed CO conversion in range of 15%. This behavior is related with surface area, and also with the amount of Cu in the surface of samples (author)

Tetragonal zirconia ceramics in Zr O2-Ce O2 system (Ce-TZP): preparation, characterization and mechanical properties

International Nuclear Information System (INIS)

Andrade Nono, M.C. de.

1992-01-01

This paper describes and discusses the results achieved in a study about Ce-TZP ceramics prepared from conventional powder mixtures of Zr O 2 and Ce O 2 (with composition in the range of 8 to 16 mol% Ce O 2 ). Physical and chemical characteristics were related with the powder compaction behavior and with the sintering state. The sintered ceramics showed a level of high porosity (≅ 4%), mainly due to the fairly adequate powder characteristics and compaction. The crystalline phases were analysed from X-rays diffraction data and showed that these ceramics can present tetragonal-to-monoclinic stress induced transformation. The bending strength, fracture toughness and Vickers hardness results were influenced by Ce O 2 content microstructure and sintering temperature. These Ce-TZP ceramics showed mechanical strength results comparable to those published in the international literature. (author)

Complex impedance study on nano-CeO2 coating TiO2

International Nuclear Information System (INIS)

Zhang Mei; Wang Honglian; Wang Xidong; Li Wenchao

2006-01-01

Titanium dioxide (TiO 2 ) nanoparticles and cerium dioxide (CeO 2 ) nanoparticles coated titanium dioxide (TiO 2 ) nanoparticles (CeO 2 -TiO 2 nanoparticles) have been successfully synthesized by sol-gel method. The complex impedance of the materials was investigated. The grain resistance, boundary resistance and activation energy of the nanoparticles were calculated according to Arrhenius equation. According to calculating results, the active capacity of pure TiO 2 nanoparticles has been improved because of nano-CeO 2 coating. An optimal CeO 2 content of 4.9 mol% was achieved. The high resolution electron microscopy images of CeO 2 -TiO 2 nanoparticles showed that TiO 2 nanoparticles, as a core, were covered by CeO 2 nanoparticles. The average size of CeO 2 coating TiO 2 nanoparticles was about 70 nm. Scanning electron microscopy observation indicted that CeO 2 nanoparticle coating improved the separation, insulation, and stability the CeO 2 -TiO 2 nanoparticles, which was benefit to the activity of materials

The analysis of carbohydrates in milk powder by a new "heart-cutting" two-dimensional liquid chromatography method.

Science.gov (United States)

Ma, Jing; Hou, Xiaofang; Zhang, Bing; Wang, Yunan; He, Langchong

2014-03-01

In this study, a new"heart-cutting" two-dimensional liquid chromatography method for the simultaneous determination of carbohydrate contents in milk powder was presented. In this two dimensional liquid chromatography system, a Venusil XBP-C4 analysis column was used in the first dimension ((1)D) as a pre-separation column, a ZORBAX carbohydrates analysis column was used in the second dimension ((2)D) as a final-analysis column. The whole process was completed in less than 35min without a particular sample preparation procedure. The capability of the new two dimensional HPLC method was demonstrated in the determination of carbohydrates in various brands of milk powder samples. A conventional one dimensional chromatography method was also proposed. The two proposed methods were both validated in terms of linearity, limits of detection, accuracy and precision. The comparison between the results obtained with the two methods showed that the new and completely automated two dimensional liquid chromatography method is more suitable for milk powder sample because of its online cleanup effect involved. Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.

Photoemission properties of Eu-doped Zr1- x Ce x O2 (x = 0-0.2) nanoparticles prepared by hydrothermal method

Science.gov (United States)

Ozawa, Masakuni; Matsumoto, Masashi; Hattori, Masatomo

2018-01-01

Photoluminescent Eu-doped ZrO2 and Zr1- x Ce x O2 (x = 0-0.2) nanoparticles were prepared by a hydrothermal method. X-ray diffraction and Raman spectra indicated the formation of tetragonal crystals of ZrO2 and its solid solutions with a grain size of less than 10 nm diameter after heat treatment at 400 °C. The photoemission spectra of Zr1- x Ce x O2:Eu3+ nanocrystalline samples showed the typical emission of Eu3+ ions assigned to 5D0 → 7F1 (590 nm) and 5D0 → 7F2 (610 nm) transitions and additional emissions of 5D0 → 7F J with higher J of 3-5. Increasing the CeO2 concentration reduced the emission intensity, and the emission peak shift was affected by a local lattice distortion, i.e., CeO2 concentration. The present study provided fundamental knowledge that is expected to enable the fabrication of ZrO2-based nanocrystal phosphor materials and a measure for controlling the emission peak shift and intensity in oxide fluorite-based phosphor.

Preparation and corrosion resistance studies of nanometric sol-gel-based CeO2 film with a chromium-free pretreatment on AZ91D magnesium alloy

International Nuclear Information System (INIS)

Zhang Shiyan; Li Qing; Chen Bo; Yang Xiaokui

2010-01-01

Magnesium alloy, although valuable, is reactive and requires protection before it can be applied in many fields. In this study, a novel protective environmental-friendly gradient coating was performed on AZ91D magnesium alloy by non-chromate surface treatments, which consisted of phytic acid chemical conversion coating and the sol-gel-based CeO 2 thin film. The surface morphologies, microstructure and composition of the coatings were investigated by scanning electron microscopy (SEM), energy disperse spectroscopy (EDS) and X-ray diffraction (XRD), respectively. The corrosion resistance of the coatings was evaluated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl solution. The effects of the concentration, layers, temperature of heat treatment of CeO 2 sol on the anti-corrosion properties of the gradient coating for magnesium were also investigated. The results showed that the gradient coating was mainly composed of crystalline CeO 2 . According to the results of electrochemical tests, the corrosion resistance of AZ91D magnesium alloy was found to be greatly improved by means of this new environmental-friendly surface treatment.

Amperometric estimation of La3+ and Ce3+ with cupferron using d.m.e

International Nuclear Information System (INIS)

Pitre, K.S.; Lavale, S.C.

1982-01-01

Cupferron has been employed as a reagent for the amperometric titrations of La 3+ and Ce 3+ in very dilute solution using d.m.e. Hydrochloric acid (pH=2.75) has been used as supporting electrolyte. These titrations revealed cupferron to metal ratio of 1:1. Titrations are not hampered by the presence of a fairly large amount of Li + , Na + , K + , Mg 3+ , Zn 3+ , Al 3+ , Cl - , Br - , I - , NO 3 - , NO 2 - , CH 2 COO - and ClO 4 - ions. Furthermore, micro and ultramicro quantities of La 3+ and Ce 2+ have been successfully determined with an error of less than +- 0.70%. (author)

Ann modeling of kerf transfer in Co2 laser cutting and optimization of cutting parameters using monte carlo method

Directory of Open Access Journals (Sweden)

Miloš Madić

2015-01-01

Full Text Available In this paper, an attempt has been made to develop a mathematical model in order to study the relationship between laser cutting parameters such as laser power, cutting speed, assist gas pressure and focus position, and kerf taper angle obtained in CO2 laser cutting of AISI 304 stainless steel. To this aim, a single hidden layer artificial neural network (ANN trained with gradient descent with momentum algorithm was used. To obtain an experimental database for the ANN training, laser cutting experiment was planned as per Taguchi’s L27 orthogonal array with three levels for each of the cutting parameters. Statistically assessed as adequate, ANN model was then used to investigate the effect of the laser cutting parameters on the kerf taper angle by generating 2D and 3D plots. It was observed that the kerf taper angle was highly sensitive to the selected laser cutting parameters, as well as their interactions. In addition to modeling, by applying the Monte Carlo method on the developed kerf taper angle ANN model, the near optimal laser cutting parameter settings, which minimize kerf taper angle, were determined.

Chemiluminescence of the Ce{sup 3+}* ions, and the {sup 1}ГђЕѕ{sub 2} and ({sup 1}ГђЕѕ{sub 2}){sub 2} molecular species of oxygen induced by active surface of the (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6} crystals at reduction of Ce{sup 4+} to Ce{sup 3+} by water in heterogeneous system «(NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6}-C{sub 6}H{sub 6}-H{sub 2}O»

Energy Technology Data Exchange (ETDEWEB)

Bulgakov, Ramil G., E-mail: profbulgakov@yandex.ru [Laboratory of Negative Ions Mass Spectrometry, Institute of Molecule and Crystal Physics, Ufa Research Centre of the Russian Academy of Sciences, 71, Oktyabrya Prosp., 450054 Ufa (Russian Federation); Gazeeva, Dilara R., E-mail: galimovdi@mail.ru [Laboratory of High Energy Chemistry and Catalysis, Institute of Petrochemistry and Catalysis Russian Academy of Sciences, 141 Prosp. Oktyabrya, 450075 Ufa (Russian Federation); Galimov, Dim I. [Laboratory of High Energy Chemistry and Catalysis, Institute of Petrochemistry and Catalysis Russian Academy of Sciences, 141 Prosp. Oktyabrya, 450075 Ufa (Russian Federation)

2017-03-15

We have discovered an unusual new chemiluminescence (CL) in the title system, which is different from other known CL by unusual combination of various in nature emitters, namely, electronically excited state of the Ce{sup 3+}* ion (λ{sub max}=335 nm), singlet oxygen {sup 1}ГђЕѕ{sub 2} (emission near 1270 nm) and its dimer ({sup 1}ГђЕѕ{sub 2}){sub 2} (λ{sub max}=490, 645, 715 nm). The Ce{sup 3+}* ions and oxygen emitters {sup 1}O{sub 2} and ({sup 1}O{sub 2}){sub 2} are generated in the reaction of Ce{sup 4+} with water and hydrogen peroxide, respectively. CL is generated only in a heterogeneous system «(NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6}-C{sub 6}H{sub 6}-H{sub 2}O» and completely absent in a homogeneous solution (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6} in water containing benzene. This is due to the fact that the redox processes and CL in the «(NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6}-C{sub 6}H{sub 6}-H{sub 2}O» system are induced by active surface of the (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6} crystals. It is through the action of the active surface of the (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 6} crystals is carried out population of such a high energy level of 5d{sup 1} excited state of Ce{sup 3+}* ion (λ{sub max}=353 nm, 3.7 eV). Discovered CL is the first example of an experimental registration of the Ce{sup 3+}* ion emission in a chemical reaction, because formation of Ce{sup 3+}* ion previously assumed to be in a great many works on the study of CL in reactions of Ce{sup 4+} compounds with various reducing agents, including the reaction with water, initiated by light or catalysts. Possible mechanism generation of new CL in the system under study has been proposed in the paper. - Highlights: • A new chemiluminescence (CL) in the (NH{sub 4}){sub 2}Ce(NO{sub 3}){sub 2}-C{sub 6}H{sub 6}-H{sub 2}O system was discovered. • The emission of the Ce{sup 3+}* ion as a CL emitter has been registered for the first time. • Other emitters of this CL are

Two-photon excitation processes to near-ultraviolet states in Ce3+:CaF2

International Nuclear Information System (INIS)

Hamilton, D.S.

1982-11-01

The two-photon transition to the lowest Ce 3+ 5d state in Ce 3+ :CaF 2 has been investigated. At liquid helium temperatures, a no-phonon resonance line is observed and is accompanied by a vibrational sideband. The peak cross section for this transition is of order 1 x 10 -53 cm 4 s indicating strong parity mixing for the 5d levels. The no-phonon line shows a polarization anisotropy consistent with a tetragonal Ce 3+ site of C 4 /sub V/ symmetry. The phonon side band shows a different anisotropy than the no-phonon line and its polarization characteristics are a function of phonon frequency and temperature

2D NiFe/CeO2 Basic-Site-Enhanced Catalyst via in-Situ Topotactic Reduction for Selectively Catalyzing the H2 Generation from N2H4·H2O.

Science.gov (United States)

Wu, Dandan; Wen, Ming; Gu, Chen; Wu, Qingsheng

2017-05-17

An economical catalyst with excellent selectivity and high activity is eagerly desirable for H 2 generation from the decomposition of N 2 H 4 ·H 2 O. Here, a bifunctional two-dimensional NiFe/CeO 2 nanocatalyst with NiFe nanoparticles (∼5 nm) uniformly anchored on CeO 2 nanosheets supports has been successfully synthesized through a dynamic controlling coprecipitation process followed by in-situ topotactic reduction. Even without NaOH as catalyst promoter, as-designed Ni 0.6 Fe 0.4 /CeO 2 nanocatalyst can show high activity for selectively catalyzing H 2 generation (reaction rate (mol N2H4 mol -1 NiFe h -1 ): 5.73 h -1 ). As ceria is easily reducible from CeO 2 to CeO 2-x , the surface of CeO 2 could supply an extremely large amount of Ce 3+ , and the high-density electrons of Ce 3+ can work as Lewis base to facilitate the absorption of N 2 H 4 , which can weaken the N-H bond and promote NiFe active centers to break the N-H bond preferentially, resulting in the high catalytic selectivity (over 99%) and activity for the H 2 generation from N 2 H 4 ·H 2 O.

XPS analysis of UxCe1-xO2±δ and determination of oxygen to metal ratio

International Nuclear Information System (INIS)

Bera, Santanu; Mittal, V.K.; Venkata Krishnan, R.; Saravanan, T.; Velmurugan, S.; Nagarajan, K.; Narasimhan, S.V.

2009-01-01

The chemical states of U and Ce in the solid solutions of UO 2 and CeO 2 are studied using the X-ray photoelectron spectroscopy. A detailed analyses on U 4f and Ce 3d photoelectron peaks revealed the presence of Ce 3+ and U 5+ /U 6+ states in the mixed oxides. The oxygen to metal ratios in different compositions of mixed oxides were estimated from the quantity of different chemical states of U and Ce present in mixed oxides.

Polarity driven morphology of CeO2(1 0 0) islands on Cu(1 1 1)

International Nuclear Information System (INIS)

Stetsovych, O.; Beran, J.; Dvořák, F.; Mašek, K.; Mysliveček, J.; Matolín, V.

2013-01-01

Thin ceria films supported by metal substrates represent important model systems for reactivity studies in heterogeneous catalysis. Here we report the growth study of the polar CeO 2 (1 0 0) phase as part of a mixed CeO 2 (1 1 1)–CeO 2 (1 0 0) thin film supported by Cu(1 1 1). The two ceria phases grow on different areas of the substrate, what allows a reliable growth characterization of the CeO 2 (1 0 0) islands on Cu(1 1 1). Scanning tunneling microscopy measurements reveal CeO 2 (1 0 0) to grow in the form of highly dispersed three dimensional (3D) islands on a CeO 2 (1 0 0) interfacial layer. The CeO 2 (1 0 0) islands exhibit a 2 × 2 surface reconstruction. The presence of the surface reconstruction together with the highly dispersed growth of CeO 2 (1 0 0) islands corresponds to the requirement for compensation of the surface dipole moment on the CeO 2 (1 0 0). CeO 2 (1 0 0) islands are further characterized by reflection high energy electron diffraction yielding their epitaxial relations with respect to the Cu(1 1 1) substrate. The growth of well characterized CeO 2 (1 0 0) islands supported by Cu(1 1 1) represents a starting point for developing a novel template for structure-related reactivity studies of ceria based model catalysts.

A case of high-titer anti-D hemolytic disease of the newborn in which late onset and mild course is associated with the D variant, RHD-CE(9)-D.

Science.gov (United States)

Jakobsen, Marianne A; Nielsen, Christian; Sprogøe, Ulrik

2014-10-01

The RhD antigen is very immunogenic and is a significant cause of hemolytic disease of the newborn (HDN). The RHD-CE(8-9)-D hybrid allele is commonly associated with a D- phenotype. Here, we report a case of high-titer maternal anti-D and late onset of HDN in a newborn carrying a RHD-CE(9)-D variant supposedly encoding the same partial D antigen as the RHD-CE(8-9)-D allele, but with significant expression of D antigen. To elucidate the blood group antigen background of the case, we carried out serologic, flow cytometric, and genetics studies of the newborn and his father. Individuals carrying the RHD-CE(9)-D allele do express D antigen, but do so at significantly lower levels than those carrying the more common D+ phenotypes (e.g., DCe/dce). It may mitigate and delay otherwise severe HDN in pregnancies complicated by high-titer anti-D. © 2014 AABB.

Monolithic Au/CeO2 nanorod framework catalyst prepared by dealloying for low-temperature CO oxidation

Science.gov (United States)

Zhang, Xiaolong; Duan, Dong; Li, Guijing; Feng, Wenjie; Yang, Sen; Sun, Zhanbo

2018-03-01

Monolithic Au/CeO2 nanorod frameworks (NFs) with porous structure were prepared by dealloying melt-spun Al89.7Ce10Au0.3 ribbons. After calcination in O2, a 3D Au/CeO2 NF catalyst with large surface area was obtained and used for low-temperature CO oxidation. The small Au clusters/nanoparticles (NPs) were in situ supported and highly dispersed on the nanorod surface, creating many nanoscale contact interfaces. XPS results demonstrated that high-concentration oxygen vacancy and Au δ+/Au0 co-existed in the calcined sample. The Au/CeO2 nanorod catalyst calcined at 400 °C exhibited much higher catalytic activity for CO oxidation compared with the dealloyed sample and bare CeO2 nanorods. Moreover, its complete reaction temperature was as low as 91 °C. The designed Au/CeO2 NF catalyst not only possessed extreme sintering resistance but also exhibited high performance owing to the enhanced interaction between the Au clusters/NPs and CeO2 nanorod during calcination.

Ethanol Sensor of CdO/Al2O3/CeO2 Obtained from Ce-DOPED Layered Double Hydroxides with High Response and Selectivity

Science.gov (United States)

Xu, Dongmei; Guan, Meiyu; Xu, Qinghong; Guo, Ying; Wang, Yao

2013-04-01

In this paper, Ce-doped CdAl layered double hydroxide (LDH) was first synthesized and the derivative CdO/Al2O3/CeO2 composite oxide was prepared by calcining Ce-doped CdAl LDH. The structure, morphology and chemical state of the Ce doped CdAl LDH and CdO/Al2O3/CeO2 were also investigated by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), solid state nuclear magnetic resonance (SSNMR), scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). The gas sensing properties of CdO/Al2O3/CeO2 to ethanol were further studied and compared with CdO/Al2O3 prepared from CdAl LDH, CeO2 powder as well as the calcined Ce salt. It turns out that CdO/Al2O3/CeO2 sensor shows best performance in ethanol response. Besides, CdO/Al2O3/CeO2 possesses short response/recovery time (12/72 s) as well as remarkable selectivity in ethanol sensing, which means composite oxides prepared from LDH are very promising in gas sensing application.

Bio diesel synthesis from pongamia pinnata oil over modified CeO{sub 2} catalysts

Energy Technology Data Exchange (ETDEWEB)

Venkatesh; Sathgatta Z, M. S.; Manjunatha, S.; Thammannigowda V, V., E-mail: mohamed.shamshuddin@gmail.com [HMS Institute of Technology, Chemistry Research Laboratory, NH4, Kyathsandra, Tumkur, 572104 Karnataka (India)

2014-07-01

This study investigates the use of CeO{sub 2}, ZrO{sub 2}, Mg O and CeO{sub 2}-ZrO{sub 2}, CeO{sub 2}-Mg O, CeO{sub 2}-ZrO{sub 2}-Mg O mixed oxides as solid base catalysts for the transesterification of Pongamia pinnata oil with methanol to produce bio diesel. SO{sub 4}{sup 2-}/CeO{sub 2} and SO{sub 4}{sup 2-}/CeO{sub 2}-ZrO{sub 2} were also prepared and used as solid acid catalysts for esterification of Pongamia pinnata oil (P-oil) to reduce the % of free fatty acid (FFA) in P-oil. The oxide catalysts were prepared by an incipient wetness impregnation method and characterized by techniques such as NH{sub 3}-Tpd for surface acidity, CO{sub 2}-Tpd for surface basicity and powder X-ray diffraction for crystallinity. The effect of nature of the catalyst, methanol to P-oil molar ratio and reaction time in esterification as well as in transesterification was investigated. The catalytic materials were reactive d and reused for five reaction cycles and the results showed that the ceria based catalysts have reasonably good reusability both in esterification and transesterification reaction. The test results also revealed that the CeO{sub 2}-ZrO{sub 2} modified with Mg O could have potential for use in the large scale bio diesel production. (Author)

CO oxidation catalyzed by ag nanoparticles supported on SnO/CeO2

KAUST Repository

Khan, Inayatali

2015-01-01

Ag-Sn/CeO2 catalysts were synthesized by the co-precipitation method with different Ag-Sn wt.% loadings and were tested for the oxidation of CO. The catalysts were characterized by powder X-ray diffractometry (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray spectroscopy (EDS), and selected area electron diffraction (SAED) techniques. UV-Vis measurements were carried out to elucidate the ionic states of the silver particles, and the temperature-programmed reduction (TPR) technique was employed to check the reduction temperature of the catalyst supported on CeO2. There are peaks for silver crystallites in the X-ray diffraction patterns and the presence of SnO was not well evidenced by the XRD technique due to sintering inside the 3D array channels of CeO2 during the calcination process. The Ag-Sn/CeO2 (4%) catalyst was the most efficient and exhibited 100% CO oxidation at 100 °C due to small particle size and strong electronic interaction with the SnO/CeO2 support. © 2015 Sociedade Brasileira de Química.

Facile hydrothermal synthesis of CeO 2 nanopebbles

Indian Academy of Sciences (India)

Cerium oxide (CeO2) nanopebbles have been synthesized using a facile hydrothermal method. X-ray diffraction pattern (XRD) and transmission electron microscopy analyses confirm the presence of CeO2 nanopebbles. XRD shows the formation of cubic fluorite CeO2 and the average particle size estimated from the ...

Synthesis, extraction and electronic structure of Ce@C2n

Science.gov (United States)

Liu, Bing-Bing; Zou, Guang-Tian; Yang, Hai-Bin; Yu, San; Lu, Jin-Shan; Liu, Zi-Yang; Liu, Shu-Ying; Xu, Wen-Guo

1997-11-01

In view of the growing interest in endohedral lanthanide fullerenes, Ce, as a typical+ 4 oxidation state lanthanide element, has been systematically studied. The synthesis, extraction and electronic structure of Ce @ C2n are investigated. Soot containing Ce@C2n was synthesized in high yield by carbonizing CeO2-containing graphite rods and are back-burning the CeC2-enriched cathode deposit in a DC arc plasma apparatus. Ce@C2n dominated by Ce@C82, can be efficiently extracted from the insoluble part of the soot after toluene Soxhlet extraction by pyridine at high temperature and high pressure in a closed vessel. About 60% Ce@C2n(2n = 82, 80, 78, 76) and 35% Ce@C82 can be enriched in the pyridine extract. This fact is identified by desorption electron impact mass spectrometry (DEI MS). The electronic structure of Ce@C2n is analyzed by using X-ray photoemission spectroscopy (XPS) of pyridine-free film. It is suggested that the encapsulated Ce atom is in a charge state close to+ 3 and was effectively protected from reaction with water and oxygen by the enclosing fullerene cage. Unlike theoretical expectation, the electronic state of Ce@C82 is formally described as Ce+3@C3-82.

Neutron diffraction study of the magnetic structures of CeMn2Ge2 and CeMn2Si2

International Nuclear Information System (INIS)

Fernandez-Baca, J.A.; Chakoumakos, B.C.; Hill, P.; Ali, N.

1995-01-01

The magnetic properties of the layered compounds of the form RMn 2 X 2 (R = Rare Earth, X = Si, Ge) have been thought to be sensitive to the intralayer Mn-Mn distance. Thus it has been reported that the Mn moments in CeMn 2 Si 2 are aligned antiferromagnetically (AF) below T N = 380K, while the Mn moments in CeMn 2 Ge 2 are ferromagnetic (FM) below T C = 316K. Recently, however, there has been some debate about the actual magnetic structures of this family of compounds, and for this reason the authors have performed high-resolution neutron powder diffraction measurements on these compounds for temperatures between 12K and 550K. The measurements indicate that at high temperatures both compounds are paramagnetic. Below T N = 380K CeMn 2 Si 2 becomes a collinear AF, with a structure similar to that reported by Siek et al. in which the magnetic propagation vector is τ = (0 0 1). CeMn 2 Ge 2 on the other hand, exhibits two different magnetic transitions. At T N ∼ 415K there is a transition to a collinear AF phase characterized by the commensurate propagation wavevector τ = (1 0 1). At T C = 318K there is a transition to a conical structure with a ferromagnetic component along the c-axis and a helical component in the ab plane. The helical component is characterized by the incommensurate propagation vector τ = (1 0 1-q z ), where q z is temperature dependent. These findings are consistent with the recent results of Welter et al

A case of high-titer anti-D hemolytic disease of the newborn in which late onset and mild course is associated with the D variant, RHD-CE(9)-D

DEFF Research Database (Denmark)

Jakobsen, Marianne A; Nielsen, Christian; Sprogøe, Ulrik

2014-01-01

BACKGROUND: The RhD antigen is very immunogenic and is a significant cause of hemolytic disease of the newborn (HDN). The RHD-CE(8-9)-D hybrid allele is commonly associated with a D- phenotype. Here, we report a case of high-titer maternal anti-D and late onset of HDN in a newborn carrying a RHD......-CE(9)-D variant supposedly encoding the same partial D antigen as the RHD-CE(8-9)-D allele, but with significant expression of D antigen. STUDY DESIGN AND METHODS: To elucidate the blood group antigen background of the case, we carried out serologic, flow cytometric, and genetics studies of the newborn...

3D Analysis of D-RaCe and Self-Adjusting File in Removing Filling Materials from Curved Root Canals Instrumented and Filled with Different Techniques

Directory of Open Access Journals (Sweden)

Neslihan Simsek

2014-01-01

Full Text Available The aim of this study was to compare the efficacy of D-RaCe files and a self-adjusting file (SAF system in removing filling material from curved root canals instrumented and filled with different techniques by using microcomputed tomography (micro-CT. The mesial roots of 20 extracted mandibular first molars were used. Root canals (mesiobuccal and mesiolingual were instrumented with SAF or Revo-S. The canals were then filled with gutta-percha and AH Plus sealer using cold lateral compaction or thermoplasticized injectable techniques. The root fillings were first removed with D-RaCe (Step 1, followed by Step 2, in which a SAF system was used to remove the residual fillings in all groups. Micro-CT scans were used to measure the volume of residual filling after root canal filling, reinstrumentation with D-RaCe (Step 1, and reinstrumentation with SAF (Step 2. Data were analyzed using Wilcoxon and Kruskal-Wallis tests. There were no statistically significant differences between filling techniques in the canals instrumented with SAF (P=0.292 and Revo-S (P=0.306. The amount of remaining filling material was similar in all groups (P=0.363; all of the instrumentation techniques left filling residue inside the canals. However, the additional use of SAF was more effective than using D-RaCe alone.

Ni-CeO2 Cermets Synthesis by Solid State Sintering of Ni/CeO2 Multilayer

Directory of Open Access Journals (Sweden)

Aleksandras ILJINAS

2013-12-01

Full Text Available Nickel and gadolinium doped cerium oxide (GDC cermet is intensively investigated for an application as an anode material for solid oxide fuel cells based on various electrolytes. The purpose of the present investigation is to analyze morphology, microstructure, and optical properties of deposited and annealed for one hour in the temperatures from 500 ºC to 900 ºC Ni/CeO2 multilayer thin films deposited by sputtering. The crystallographic structure of thin films was investigated by X-ray diffraction. The morphology of the film cross-section was investigated with scanning electron microscope. The elemental analysis of samples was investigated by energy-dispersive X-ray spectroscopy. The fitting of the optical reflectance data was made using Abeles matrix method that is used for the design of interference coatings. The film cross-section of the post-annealed samples consisted of four layers. The first CeO2 layer (on Si had the same fine columnar structure with no features of Ni intermixing. The part of Ni (middle-layer after annealing was converted to NiO with grain size exceeding 100 nm. The CeO2 layer deposited on Ni was divided into two layers. Lower layer had small grains not exceeding 25 nm and consisting of NiO and CeO2 mixture. Upper layer consisted of CeO2 columns with approximate thickness of 50 nm. Ni sample annealed at 600 ºC was fully oxidized. The NiO thickness and refraction index were almost steady after annealing in various temperatures. The approximation of experimental reflectance data was successful only for the samples with one transparent homogeneous layer. The reflectance of the Ni/CeO2 samples annealed at intermediate temperatures could not be fitted using one-layer or three-layer model. That may show that a simplified model could not be implemented.  The real system has complicated distribution of refraction index. DOI: http://dx.doi.org/10.5755/j01.ms.19.4.3073

Determination of the differences in oxidation potentials for the Pr3+/Pr2+ and Ce3+/Ce2+ pairs in halide melts

International Nuclear Information System (INIS)

Mikheev, N.B.; Auerman, L.N.; Rumer, I.A.; D'yachkova, R.A.

1983-01-01

Cocrystallization has been used with the (PrOCl)/sub s. ph/ - (PrCl 2 , PrCl 3 , SrCl 2 ) melt system to examine the dependence of the cerium(III) cocrystallization coefficient on the X/sub Pr 2+ /X/sub Pr 3+ / ratio in the melt. Measurement has been made in this way of the difference in oxidation potentials for the pairs Pr 3+ /Pr 2+ and Ce 3+ /Ce 2+ : ΔE/sub Pr 3+ /Pr 2+0 -E/sub Ce 3+ /Ce 2+ / 0 , which is 0.08 +/- 0.04 V for chloride

Synthesis and photocatalytic activity of Ce-doped TiO2 and TiO2 nanotubes

International Nuclear Information System (INIS)

Arruda, L.B.; Pereira, E.A.; Paula, F.R.; Lisboa Filho, P.N.

2016-01-01

Full text: One-dimensional nanostructures have been intensively studied, from the point of view of their synthesis and mechanisms of formation, as well as their applications in photonics, solar energy conversion, environmental and photocatalysis, since their properties due high surface area, electrical conductivity and light dispersion effects. Titanium dioxide (TiO2) nanoparticles have been demonstrated to be an effective multifunctional material especially when the particle size is less than 50 nm exhibit photoinduced activities that originate from the semiconductor band gap. TiO2 is semiconductor more used in photocatalysis, for this reason various properties have been thoroughly investigated in order to show that the photocatalytic activity and TiO2 reaction mechanism are influenced by structure, defects and impurities, surface morphology. and interfaces in addition to the concentration of dopants, such as rare-earth elements. Cerium ions, for example, vary between Ce4+ and Ce3 + oxidation state making the cerium oxide appear as CeO2 and Ce2O3 under oxidation and reduction conditions. These different electronic structures of Ce3+ (4f15d0) and Ce4+ (4f05d0) provide different catalytic and optical properties at the TiO2. In this work, samples of Ce-doped TiO2 and TiO2 were synthesized by alkali route, and its photocatalytic activity analyzed in order to create a relationship between the response obtained and the structure and morphology of each sample. Alkali route consists in submitting TiO2 (anatase) powder directly in medium of the NaOH (10M) and maintained at 120°C/20 hours by a glycerin bath with subsequent washed with water and HCl (0.1M) until reaching the desired pH. The synthesized samples were then studied by X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The photocatalytic decomposition of rhodamine B (Rh.B) it was performed under UV irradiation and visible light in air. For the obtained

Synthesis and photocatalytic activity of Ce-doped TiO2 and TiO2 nanotubes

Energy Technology Data Exchange (ETDEWEB)

Arruda, L.B.; Pereira, E.A.; Paula, F.R.; Lisboa Filho, P.N. [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), SP (Brazil)

2016-07-01

Full text: One-dimensional nanostructures have been intensively studied, from the point of view of their synthesis and mechanisms of formation, as well as their applications in photonics, solar energy conversion, environmental and photocatalysis, since their properties due high surface area, electrical conductivity and light dispersion effects. Titanium dioxide (TiO2) nanoparticles have been demonstrated to be an effective multifunctional material especially when the particle size is less than 50 nm exhibit photoinduced activities that originate from the semiconductor band gap. TiO2 is semiconductor more used in photocatalysis, for this reason various properties have been thoroughly investigated in order to show that the photocatalytic activity and TiO2 reaction mechanism are influenced by structure, defects and impurities, surface morphology. and interfaces in addition to the concentration of dopants, such as rare-earth elements. Cerium ions, for example, vary between Ce4+ and Ce3 + oxidation state making the cerium oxide appear as CeO2 and Ce2O3 under oxidation and reduction conditions. These different electronic structures of Ce3+ (4f15d0) and Ce4+ (4f05d0) provide different catalytic and optical properties at the TiO2. In this work, samples of Ce-doped TiO2 and TiO2 were synthesized by alkali route, and its photocatalytic activity analyzed in order to create a relationship between the response obtained and the structure and morphology of each sample. Alkali route consists in submitting TiO2 (anatase) powder directly in medium of the NaOH (10M) and maintained at 120°C/20 hours by a glycerin bath with subsequent washed with water and HCl (0.1M) until reaching the desired pH. The synthesized samples were then studied by X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The photocatalytic decomposition of rhodamine B (Rh.B) it was performed under UV irradiation and visible light in air. For the obtained

Luminescence and scintillation response of YGd.sub.2./sub.Al.sub.2./sub.Ga.sub.3./sub.O.sub.12./sub.:Ce and LuGd.sub.2./sub.Al.sub.2./sub.Ga.sub.3./sub.O.sub.12./sub.:Ce scintillators

Czech Academy of Sciences Publication Activity Database

Chewpraditkul, Wa.; Pattanaboonmee, N.; Chewpraditkul, W.; Kamada, K.; Yoshikawa, A.; Nikl, Martin

2016-01-01

Roč. 90, Jul (2016), s. 153-156 ISSN 1350-4487. [International Conference on Luminescent Detectors and Transformers of Ionizing Radiation (LUMDETR). Tartu (Estonsko), 20.09.2015-25.09.2015] R&D Projects: GA ČR GAP204/12/0805 Institutional support: RVO:68378271 Keywords : YGd 2 Al 2 Ga 3 O 12 :Ce * LuGd 2 Al 2 Ga 3 O 12 :Ce * light yield * luminescence * scintillation Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.442, year: 2016

Three-Dimensional Structure of CeO2 Nanocrystals

DEFF Research Database (Denmark)

Tan, Joyce Pei Ying; Tan, Hui Ru; Boothroyd, Chris

2011-01-01

Visualization of three-dimensional (3D) structures of materials at the nanometer scale can shed important information on the performance of their applications and provide insight into the growth mechanism of shape-controlled nanomaterials. In this paper, the 3D structures and growth pathway of Ce...

Homogeneously dispersed CeO2 nanoparticles on exfoliated hexaniobate nanosheets

Science.gov (United States)

Marques, Thalles M. F.; Strayer, Megan E.; Ghosh, Anupama; Silva, Alexandre; Ferreira, Odair P.; Fujisawa, Kazunori; Alves da Cunha, Jose R.; Abreu, Guilherme J. P.; Terrones, Mauricio; Mallouk, Thomas E.; Viana, Bartolomeu C.

2017-12-01

Hexaniobate nanosheets derived from the parent compound K4Nb6O17 have been decorated with CeO2 nanoparticles by ion exchange with aqueous cerium (IV) solution. Very homogeneous CeO2 nanoparticle decoration of the hexaniobate sheets can be achieved by this method and the resulting composites may absorb visible light. HRTEM images show that ∼3.0 nm diameter CeO2 nanoparticles adhere to hexaniobate nanosheets that are exfoliated and then restacked prior to Ce deposition. The interfacial interaction between CeO2 nanoparticles and nanosheets would be due to an electrostatic attraction mechanism. Raman and XRD measurements have given strong evidence that CeO2 nanoparticles have fluorite structure. EDS, FTIR and XPS results suggest almost complete exchange of TBA+ and K+ by Ce4+. Cerium ion exchange on the acid exchanged parent compound, H2.9K1.1Nb6O17, revealed that the extent of Ce ion exchange is much greater in case of nanosheets, which may be rationalized by the larger surface area available after exfoliation. XPS measurements show that the ratio of Ce4+/Ce3+ is around 4.4, in agreement with the formation of fluorite structure (CeO2). Thus, these CeO2 nanoparticle/nanosheet composites may be useful for catalytic processes.

Defining a BMI Cut-Off Point for the Iranian Population: The Shiraz Heart Study.

Directory of Open Access Journals (Sweden)

Mohammad Ali Babai

Full Text Available In this study we evaluated and redefined the optimum body mass index (BMI cut-off point for the Iranian population based on metabolic syndrome (MeS risk factors. We further evaluated BMI cut-off points with and without waist circumference (WC as a cofactor of risk and compared the differences. This study is part of the largest surveillance programs conducted in Shiraz, Iran, termed the Shiraz Heart study. Our study sample included subjects between the ages of 20 to 65 years old. After excluding pregnant women, those with missing data and those with comorbid disease, a total of 12283 made up the study population. The participants underwent a series of tests and evaluations by trained professionals in accordance with WHO recommendations. Hypertension, abnormal fasting blood sugar (FBS, triglyceride (TG and high density lipoprotein cholesterol (HDL (in the context of the definition of metabolic syndrome were prevalent among 32.4%, 27.6%, 42.1 and 44.2% of our participants, respectively. Women displayed higher rates of overall obesity compared to men (based on the definition by the WHO as higher than 30 kg/m2. Regarding MeS, 38.9% of our population had the all symptoms of MeS which was more prevalent among women (41.5% vs. 36%. When excluding WC in the definition of MeS, results showed that males tend to show a higher rate of metabolic risk factors (19.2% vs. 15.6%. Results of multivariate analysis showed that parallel to an increase in BMI, the odds ratio (OR for acquiring each component of the metabolic syndrome increased (OR = 1.178; CI: 1.166-1.190. By excluding WC, the previous OR decreased (OR = 1.105; CI: 1.093-1.118. Receiver Operating Characteristic (ROC curve analysis showed that the optimum BMI cut-off point for predicting metabolic syndrome was 26.1 kg/m2 and 26.2 kg/m2 [Accuracy (Acc = 69% and 61%, respectively] for males and females, respectively. The overall BMI cut-off for both sexes was 26.2 kg/m2 (Acc = 65% with sensitivity and

32 CFR Appendix C to Part 247 - Mailing of DoD Newspapers, Magazines, CE Guides, and Installation Maps; Sales and Distribution of...

Science.gov (United States)

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Mailing of DoD Newspapers, Magazines, CE Guides...) MISCELLANEOUS DEPARTMENT OF DEFENSE NEWSPAPERS, MAGAZINES AND CIVILIAN ENTERPRISE PUBLICATIONS Pt. 247, App. C Appendix C to Part 247—Mailing of DoD Newspapers, Magazines, CE Guides, and Installation Maps; Sales and...

d-Wave density waves in high Tc cuprates and CeCoIn5

International Nuclear Information System (INIS)

Maki, Kazumi; Dora, Balazs; Vanyolos, Andras; Virosztek, Attila

2007-01-01

Unconventional density waves (UDW) have a long history starting with the speculation of Halperin and Rice in 1968. However, a more realistic approach started around 1999 in order to clarify the nature of the pseudogap in the underdoped region of hole-doped high T c cuprates. Also d-wave density waves (dDW) evolved from early unrealistic 2D model with Z 2 symmetry to more realistic 3D mean-field condensate with U(1) gauge symmetry. More recently, the giant Nernst effect and the angle dependent magnetoresistance in LSCO, YBCO, Bi2212 and CeCoIn 5 are successfully described in terms of dDW, where the Landau quantization of the quasiparticle spectrum in dDW in a magnetic field (the Nersesyan effect) plays the crucial role

Polarity driven morphology of CeO{sub 2}(1 0 0) islands on Cu(1 1 1)

Energy Technology Data Exchange (ETDEWEB)

Stetsovych, O., E-mail: stetsovycholeksandr@gmail.com; Beran, J.; Dvořák, F.; Mašek, K.; Mysliveček, J., E-mail: Josef.Myslivecek@mff.cuni.cz; Matolín, V.

2013-11-15

Thin ceria films supported by metal substrates represent important model systems for reactivity studies in heterogeneous catalysis. Here we report the growth study of the polar CeO{sub 2}(1 0 0) phase as part of a mixed CeO{sub 2}(1 1 1)–CeO{sub 2}(1 0 0) thin film supported by Cu(1 1 1). The two ceria phases grow on different areas of the substrate, what allows a reliable growth characterization of the CeO{sub 2}(1 0 0) islands on Cu(1 1 1). Scanning tunneling microscopy measurements reveal CeO{sub 2}(1 0 0) to grow in the form of highly dispersed three dimensional (3D) islands on a CeO{sub 2}(1 0 0) interfacial layer. The CeO{sub 2}(1 0 0) islands exhibit a 2 × 2 surface reconstruction. The presence of the surface reconstruction together with the highly dispersed growth of CeO{sub 2}(1 0 0) islands corresponds to the requirement for compensation of the surface dipole moment on the CeO{sub 2}(1 0 0). CeO{sub 2}(1 0 0) islands are further characterized by reflection high energy electron diffraction yielding their epitaxial relations with respect to the Cu(1 1 1) substrate. The growth of well characterized CeO{sub 2}(1 0 0) islands supported by Cu(1 1 1) represents a starting point for developing a novel template for structure-related reactivity studies of ceria based model catalysts.

On-line two-dimensional capillary electrophoresis with mass spectrometric detection using a fully electric isolated mechanical valve.

Science.gov (United States)

Kohl, Felix J; Montealegre, Cristina; Neusüß, Christian

2016-04-01

CE is becoming more and more important in many fields of bioanalytical chemistry. Besides optical detection, hyphenation to ESI-MS detection is increasingly applied for sensitive identification purposes. Unfortunately, many CE techniques and methods established in research and industry are not compatible to ESI-MS since essential components of the background electrolyte interfere in ES ionization. In order to identify unknown peaks in established CE methods, here, a heart-cut 2D-CE separation system is introduced using a fully isolated mechanical valve with an internal loop of only 20 nL. In this system, the sample is separated using potentially any non-ESI compatible method in the first separation dimension. Subsequently, the portion of interest is cut by the internal sample loop of the valve and reintroduced to the second dimension where the interfering compounds are removed, followed by ESI-MS detection. When comparing the separation efficiency of the system with the valve to a system using a continuous capillary only a slight increase in peak width is observed. Ultraviolet/visible detection is integrated in the first dimension for switching time determination, enabling reproducible cutting of peaks of interest. The feasibility of the system is successfully demonstrated by a 2D analysis of a BSA tryptic digest sample using a nonvolatile (phosphate based) background electrolyte in the first dimension. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Cooperative effects in CeCu2Si2

International Nuclear Information System (INIS)

Lang, M.; Modler, R.; Ahlheim, U.; Helfrich, R.; Reinders, P.H.P.; Steglich, F.; Assmus, W.; Sun, W.; Bruls, G.; Weber, D.; Luethi, B.

1991-01-01

Heavy-fermion superconductivity and other cooperative effects have been explored by thermal expansion, specific heat and ultrasound measurements on CeCu 2 Si 2 single crystals. Crystals annealed under Cu atmosphere show sharp superconducting transitions at Tc max =0.63 K. At the same temperature the ''as grown'', i.e., non-bulk-superconducting, crystals reveal a pronounced phase-transition anomaly, presumably of structural origin. This new transition is associated with an expansion of the volume upon cooling and gives rise to magnetic correlations. Our results indicate a complex interplay between lattice instability, magnetic phenomena and superconductivity in CeCu 2 Si 2 . (orig.)

Crystal structure of the Ce2Ni2Zn15 compound

International Nuclear Information System (INIS)

Opainich, I.M.; Pavlyuk, V.V.; Bodak, O.I.; Cherny, R.; Yvon, K.

1996-01-01

A structure of a new ternary compound of the composition Ce2Ni2Zn15 (sp.gr.R3-barm,a=0.9080(3) nm, c=1.3294(3) nm) was determined on single-crystal and powder specimens. The study was performed on a Philips PW1100 automatic diffractometer and a DRON-4.07 powder diffractometer. The Ce2Ni2Zn15 compound is crystallized in the Ce2Al2Co15 structure type with the aluminum positions being occupied by nickel and cobalt positions being occupied by zinc

Room temperature ferromagnetism in Fe-doped CeO2 nanoparticles.

Science.gov (United States)

Maensiri, Santi; Phokha, Sumalin; Laokul, Paveena; Seraphin, Supapan

2009-11-01

RT ferromagnetism was observed in nanoparticles of Fe-doped CeO2 (i.e., Ce(0.97)Fe(0.03)O2) synthesized by a sol-gel method. The undoped and Fe-doped CeO2 were characterized by XRD, Raman spectroscopy, TEM, and VSM. The undoped samples and Ce(0.97)Fe(0.03)O2 precursor exhibit a diamagnetic behavior. The 673 K-calcined Ce(0.97)Fe(0.03)O2 sample is paramagnetic whereas 773 and 873 K-calcined Ce(0.97)Fe(0.03)O2 samples are ferromagnetism having the magnetizations of 4.65 x 10(-3) emu/g and 6.20 x 10(-3) emu/g at 10 kOe, respectively. Our results indicate that the ferromagnetic property is intrinsic to the Fe-doped CeO2 system and is not a result of any secondary magnetic phase or cluster formation.

Study of CeO{sub x}, PrO{sub x}, and Ce{sub x}Pr{sub 1-x}O{sub 2-{delta}} films on Si(111) by means of high-energetic X-ray photoelectron spectroscopy; Untersuchung von CeO{sub x}-, PrO{sub x}- und Ce{sub x}Pr{sub 1-x}O{sub 2-{delta}}- Filmen auf Si (111) mittels hochenergetischer Roentgen-Photoelektronenspektroskopie

Energy Technology Data Exchange (ETDEWEB)

Allahgholi, Aschkan

2013-03-15

The intention of this work is to shed light on two much discussed topics in the study of rare earth oxides (REO) by hard x-ray photoelectron spectroscopy (HAXPES): (i) Due to the complex spectral shape of the Ce3d region, there have been many discussions on proper approaches to determine the concentration of Ce{sup 3+} and Ce{sup 4+} species in CeO{sub x} over the last decades. (ii) Recently, the true electron structure of rare earth oxides gained new attention, since ab initio calculations showed the necessity of considering additional inter atomic charge transfer to Ce5d levels. Using HAXPES and resonant HAXPES, the question of the true electronic structure of rare earth oxides is approached from the experimental side. As a third topic, the obtained results for cerium oxide and praseodymium oxide are applied in order to investigate the plasma oxidized mixed oxide Ce{sub x}Pr{sub 1-x}O{sub 2-{delta}} grown on Si(111) during thermal reduction. (orig.)

Synthesis, luminescence, and energy-transfer properties of β-Na2Ca4(PO4)2(SiO4):A (A = Eu(2+), Dy(3+), Ce(3+)/Tb(3+)) phosphors.

Science.gov (United States)

Li, Kai; Shang, Mengmeng; Geng, Dongling; Lian, Hongzhou; Zhang, Yang; Fan, Jian; Lin, Jun

2014-07-07

A series of β-Na2Ca4(PO4)2(SiO4) (β-NCPS):A (A = Eu(2+), Dy(3+), Ce(3+)/Tb(3+)) phosphors were prepared via a high-temperature solid-state reaction route. The X-ray diffraction, Fourier transform infrared, photoluminescence (PL), cathodoluminescence (CL) properties, fluorescent lifetimes, and absolute quantum yield were exploited to characterize the samples. Under UV radiation, the β-NCPS:Eu(2+) phosphors present bright green emissions, and the β-NCPS:Ce(3+) phosphors show strong blue emissions, which are attributed to their 4f(6)5d(1) → 4f(7) and 5d-4f allowed transitions, respectively. The β-NCPS:Ce(3+), Tb(3+) phosphors display intense tunable color from blue to green and high absolute quantum yields (81% for β-NCPS:0.12Ce(3+) and 83% for β-NCPS:0.12Ce(3+), 0.08Tb(3+)) when excited at 365 nm. Simultaneously, the energy transfer from Ce(3+) to Tb(3+) ions is deduced from the spectral overlap between Ce(3+) emission and Tb(3+) excitation spectra and demonstrated by the change of emission spectra and decay lifetimes. Moreover, the energy-transfer mechanism from Ce(3+) to Tb(3+) ions is confirmed to be exchange interaction according to the discussion of expression from Dexter and Reisfeld. Under a low-voltage electron-beam excitation, the β-NCPS:A (A = Eu(2+), Dy(3+), Ce(3+)/Tb(3+)) phosphors exhibit their characteristic emissions, and the emission profiles of β-NCPS:Ce(3+),Tb(3+) phosphors are obviously different from those of the PL spectra; this difference might be ascribed to their different luminescence mechanisms. These results in PL and CL properties suggest that β-NCPS:A (A = Eu(2+), Dy(3+), Ce(3+)/Tb(3+)) phosphors are potential candidates for solid-state lighting and field-emission displays.

Hip dysplasia and osteoarthrosis: a survey of 4151 subjects from the Osteoarthrosis Substudy of the Copenhagen City Heart Study

DEFF Research Database (Denmark)

Jacobsen, Steffen; Sonne-Holm, Stig; Søballe, K

2005-01-01

Acta Orthop. 2005 Apr;76(2):149-58. Related Articles, Links Hip dysplasia and osteoarthrosis: a survey of 4151 subjects from the Osteoarthrosis Substudy of the Copenhagen City Heart Study. Jacobsen S, Sonne-Holm S, Soballe K, Gebuhr P, Lund B. Department of Orthopaedic Surgery, Copenhagen...... University Hospital, Rigshospitalet, Denmark. sjac@dadlnet.dk INTRODUCTION: Hip dysplasia (HD) is assumed to be an etiological factor in the development of premature hip osteoarthrosis (OA). We established the prevalences of HD and OA in adults according to qualified radiographic discriminators.......6 degrees). Applying a CE cut-off value of 20 degrees for designation of definite hip dysplasia, we found a prevalence of hip dysplasia of 3.4%. Approximately 2% of cases were unilateral and 1.4% of cases were bilateral. We found significant relationships between radiographic OA discriminators and the CE...

FDG-PET/ceCT is useful to predict recurrence of Pseudomyxoma peritonei

International Nuclear Information System (INIS)

Dubreuil, Julien; Skanjeti, Andrea; Giammarile, Francesco; Rousset, Pascal; Bakrin, Naoual; Passot, Guillaume; Isaac, Sylvie; Glehen, Olivier

2016-01-01

Pseudomyxoma peritonei (PMP) is a rare peritoneal neoplasm originating from appendicular tumours. There is no consolidated data available in the literature about the precise role of [ 18 F] fluorodesoxy-D-glucose Positron Emission Tomography / contrast enhanced Computed Tomography (FDG-PET/ceCT). The aim of this study was to evaluate the correlation between preoperative FDG-PET/ceCT (qualitative and semi-quantitative assessment) and progression free survival (PFS) of patients treated for PMP. All patients scheduled for PMP treatment by cytoreductive unicentric surgery, intraperitoneal chemotherapy (HIPEC), and who underwent a FDG-PET/ceCT between February 2008 and January 2014, were included. No previous treatment was performed (except biopsy or appendectomy). FDG-PET/ceCT was interpreted by two nuclear physicians in consensus. Positive FDG-PET/ceCT scans were further labelled in diffuse disease and poly/mono focal disease. SUVmax was measured based on post-operative reports. The Peritoneal Cancer Index (PCI) and Completeness of CytoReduction Score (CCR) were assessed after surgery. Fifty-six patients were included in this study, with a mean age of 56-years-old and a mean follow-up of 29.3 months. SUVmax, with a cut-off at 2.02, was predictive for the PFS on multivariate analysis. No differences were observed between diffuse disease and focal disease on PFS for progression free survival, PCI, and SUVmax (p = 0.1). Post-operative CCR was not significantly correlated with SUVmax or FDG-PET/ceCT qualitative assessment. SUVmax on preoperative FDG-PET/ceCT was an independent predictive factor for PFS in PMP. Further studies are needed to explore if FDG-PET/ceCT could potentially predict post-operative CCR. (orig.)

Thermopower studies of doped CeAl sub 2 and UAl sub 2

CERN Document Server

Park, J G

1997-01-01

We have studied the thermopower of U doped CeAl sub 2 and Ce and La doped UAl sub 2. Despite different ground state properties of CeAl sub 2 and UAl sub 2 , the former being an antiferromagnetic heavy-fermion compound and the latter non-magnetic, we have found that not only thermopower data for pure CeAl sub 2 and UAl sub 2 are similar but also the thermopower results of doped samples behave similarly. Although the similarity seen in pure systems is yet to be understood, we interpret the doping effects as the results of changes in energy dependent relaxation time with doping. (author)

Thermoluminescence studies of γ-irradiated Al{sub 2}O{sub 3}:Ce{sup 3+} phosphor

Energy Technology Data Exchange (ETDEWEB)

Reddy, S. Satyanarayana [Physics R & D Center, PES Institute of Technology, BSK 3rd Stage, Bangalore 560085 (India); Nagabhushana, K.R., E-mail: bhushankr@gmail.com [Physics R & D Center, PES Institute of Technology, BSK 3rd Stage, Bangalore 560085 (India); Department of Physics, PES University, BSK 3rd Stage, Bangalore 560085 (India); Singh, Fouran [Inter University Accelerator Centre, Aruna Asaf Ali Marg, New Delhi 110 067 (India)

2016-07-15

Pure and Ce{sup 3+} doped Al{sub 2}O{sub 3} phosphors were synthesized by solution combustion method. The synthesized samples were characterized by X-ray diffraction (XRD) and its shows α-phase of Al{sub 2}O{sub 3}. Crystallite size was estimated by Williamson–Hall (W–H) method and found to be 49, 59 and 84 nm for pure, 0.1 mol% and 1 mol% Ce{sup 3+} doped Al{sub 2}O{sub 3} respectively. Trace elemental analysis of undoped Al{sub 2}O{sub 3} shows impurities viz. Fe, Cr, Mn, Mg, Ti, etc. Photoluminescence (PL) spectra of Al{sub 2}O{sub 3}:Ce{sup 3+} shows emission at 367 nm and excitation peak at 273 nm, which are corresponding to {sup 5}D → {sup 4}F and {sup 4}F → {sup 5}D transitions respectively. PL intensity decreases with concentration up to 0.4 mol%, beyond this mol% PL intensity increases with doping concentration up to 2 mol%. Thermoluminescence (TL) studies of γ-rayed pure and Ce{sup 3+} doped Al{sub 2}O{sub 3} have been studied. Two well resolved TL glow peaks at 457.5 K and 622 K were observed in pure Al{sub 2}O{sub 3}. Additional glow peak at 566 K was observed in Al{sub 2}O{sub 3}:Ce{sup 3+}. Maximum TL intensity was observed for Al{sub 2}O{sub 3}:Ce{sup 3+} (0.1 mol%) beyond this TL intensity decreases with increasing Ce{sup 3+} concentration. Computerized glow curve deconvolution (CGCD) method was used to resolve the multiple peaks and to calculate TL kinetic parameters. Thermoluminescence emission (TLE) spectra of pure Al{sub 2}O{sub 3} glow peaks (457.5 K and 622 K) shows sharp emission at 694 nm and two small humps at 672 nm and 709 nm. The sharp peak at 696 nm corresponds to Cr{sup 3+} impurity of {sup 2}E{sub g} → {sup 4}A{sub 2g} transition of R lines and 713 nm hump is undoubtedly belongs to Cr{sup 3+} emission of near neighbor pairs. The emission at 672 nm is characteristic of Mn{sup 4+} impurity ions of {sup 2}E → {sup 4}A{sub 2} transition. TLE of Al{sub 2}O{sub 3}:Ce{sup 3+} (0.1 mol%) shows additional broad emission at 412 nm

Synergy of CuO and CeO2 combination for mercury oxidation under low-temperature selective catalytic reduction atmosphere

KAUST Repository

Li, Hailong

2016-07-19

Synergy for low temperature Hg0 oxidation under selective catalytic reduction (SCR) atmosphere was achieved when copper oxides and cerium oxides were combined in a CuO-CeO2/TiO2 (CuCeTi) catalyst. Hg0 oxidation efficiency as high as 99.0% was observed on the CuCeTi catalyst at 200 °C, even the gas hourly space velocity was extremely high. To analyze the synergistic effect, comparisons of catalyst performance in the presence of different SCR reaction gases were systematically conducted over CuO/TiO2 (CuTi), CeO2/TiO2 (CeTi) and CuCeTi catalysts prepared by sol-gel method. The interactions between copper oxides and cerium oxides in CuCeTi catalyst yielded more surface chemisorbed oxygen, and facilitated the conversion of gas-phase O2 to surface oxygen, which are favorable for Hg0 oxidation. Copper oxides in the combination interacted with NO forming more chemisorbed oxygen for Hg0 oxidation in the absence of gas-phase O2. Cerium oxides in the combination promoted Hg0 oxidation through enhancing the transformations of NO to NO2. In the absence of NO, NH3 exhibited no inhibitive effect on Hg0 oxidation, because enough Lewis acid sites due to the combination of copper oxides and cerium oxides scavenged the competitive adsorption between NH3 and Hg0. In the presence of NO, although NH3 lowered Hg0 oxidation rate through inducing reduction of oxidized mercury, complete recovery of Hg0 oxidation activity over the CuCeTi catalyst was quickly achieved after cutting off NH3. This study revealed the synergistic effect of the combination of copper oxides and cerium oxides on Hg0 oxidation, and explored the involved mechanisms. Such knowledge would help obtaining maximum Hg0 oxidation co-benefit from SCR units in coal-fired power plants.

Luminescent properties of Eu2+ and Ce3+ ions in strontium litho-silicate Li2SrSiO4

International Nuclear Information System (INIS)

Dotsenko, V.P.; Levshov, S.M.; Berezovskaya, I.V.; Stryganyuk, G.B.; Voloshinovskii, A.S.; Efryushina, N.P.

2011-01-01

The luminescent properties of Eu 2+ and Ce 3+ ions in Li 2 SrSiO 4 have been studied upon excitation in the 2-20 eV region. Based on the results of luminescent measurements, values of the crystal field splitting and the centroid shift of the Ce 3+ 5d configuration in Li 2 SrSiO 4 were found and compared with those of Ce 3+ ions in some other inorganic compounds. The Eu 2+ ions in Li 2 SrSiO 4 exhibit a broad band emission with a maximum at 576 nm, which is due to the 4f 6 5d→4f 7 transition. It was shown that the long-wavelength position of the Eu 2+ emission in Li 2 SrSiO 4 is caused by the large crystal-field splitting of the Eu 2+ 4f 6 5d configuration and relatively high degree of covalency of the Eu-O bond. The stabilization of Eu 2+ ions in Li 2 SrSiO 4 during the synthesis process requires a strong reducing agent. Two phenomenological approaches to explain the low stability of Eu 2+ in Li 2 SrSiO 4 are also discussed.

Water-Gas Shift and CO Methanation Reactions over Ni-CeO2(111) Catalysts

Energy Technology Data Exchange (ETDEWEB)

S Senanayake; J Evans; S Agnoli; L Barrio; T Chen; J Hrbek; J Rodriguez

2011-12-31

X-ray and ultraviolet photoelectron spectroscopies were used to study the interaction of Ni atoms with CeO{sub 2}(111) surfaces. Upon adsorption on CeO{sub 2}(111) at 300 K, nickel remains in a metallic state. Heating to elevated temperatures (500-800 K) leads to partial reduction of the ceria substrate with the formation of Ni{sup 2+} species that exists as NiO and/or Ce{sub 1-x}Ni{sub x}O{sub 2-y}. Interactions of nickel with the oxide substrate significantly reduce the density of occupied Ni 3d states near the Fermi level. The results of core-level photoemission and near-edge X-ray absorption fine structure point to weakly bound CO species on CeO{sub 2}(111) which are clearly distinguishable from the formation of chemisorbed carbonates. In the presence of Ni, a stronger interaction is observed with chemisorption of CO on the admetal. When the Ni is in contact with Ce{sup +3} cations, CO dissociates on the surface at 300 K forming NiC{sub x} compounds that may be involved in the formation of CH{sub 4} at higher temperatures. At medium and large Ni coverages (>0.3 ML), the Ni/CeO{sub 2}(111) surfaces are able to catalyze the production of methane from CO and H{sub 2}, with an activity slightly higher than that of Ni(100) or Ni(111). On the other hand, at small coverages of Ni (<0.3 ML), the Ni/CeO{sub 2}(111) surfaces exhibit a very low activity for CO methanation but are very good catalysts for the water-gas shift reaction.

Electrochemical characterization of Pt-CeO{sub 2}/C and Pt-Ce{sub x}Zr{sub 1-x}O{sub 2}/C catalysts for ethanol electro-oxidation

Energy Technology Data Exchange (ETDEWEB)

Bai, Yuxia; Qiu, Xinping; Xi, Jingyu; Wang, Jianshe; Li, Jinfeng; Zhu, Wentao; Chen, Liquan [Key Laboratory of Organic Optoelectronics and Molecular Engineering, Department of Chemistry, Tsinghua University, Beijing 100084 (China); Wu, Jianjun [Key Laboratory of Organic Optoelectronics and Molecular Engineering, Department of Chemistry, Tsinghua University, Beijing 100084 (China); Department of Chemistry, Shijiazhuang College, Shijiazhuang 050801 (China)

2007-04-24

Pt-CeO{sub 2}/C and a series of Pt-Ce{sub x}Zr{sub 1-x}O{sub 2}/C catalyst powders with different Ce/Zr ratio were prepared and evaluated in terms of the electrochemical activity for ethanol electro-oxidation using cyclic voltammetry (CV), steady state polarization experiments and CO-stripping technique at room temperature. XRD results show that Ce{sub x}Zr{sub 1-x}O{sub 2} and Pt coexist in the Pt-Ce{sub x}Zr{sub 1-x}O{sub 2}/C catalyst and Ce{sub x}Zr{sub 1-x}O{sub 2} has no effect on the crystalline lattice of Pt. TEM results show that the Pt and Ce{sub x}Zr{sub 1-x}O{sub 2} particles dispersed uniformly over the surface of the carbon black. Cyclic voltammetry results show that the mass activity and specific activity of Pt-CeO{sub 2}/C for ethanol electro-oxidation is higher than that of Pt/C. The structure and Ce/Zr ratio of Pt-Ce{sub x}Zr{sub 1-x}O{sub 2}/C has effect on the catalytic activity of catalysts. CO-stripping voltammetry showed that the inclusion of CeO{sub 2} and Ce{sub x}Zr{sub 1-x}O{sub 2} favors the CO oxidation at lower potential. (author)

Role of combined DWIBS/3D-CE-T1w whole-body MRI in tumor staging: Comparison with PET-CT

International Nuclear Information System (INIS)

Manenti, Guglielmo; Cicciò, Carmelo; Squillaci, Ettore; Strigari, Lidia; Calabria, Ferdinando; Danieli, Roberta

2012-01-01

Objectives: To assess the diagnostic performance of whole-body magnetic resonance imaging (WB-MRI) by diffusion-weighted whole-body imaging with background body signal suppression (DWIBS) in malignant tumor detection and the potential diagnostic advantages in generating fused DWIBS/3D-contrast enhanced T1w (3D-CE-T1w) images. Methods: 45 cancer patients underwent 18F-FDG PET-CT and WB-MRI for staging purpose. Fused DWIBS/3D-CE T1w images were generated off-line. 3D-CE-T1w, DWIBS images alone and fused with 3D-CE T1w were compared by two readers groups for detection of primary diseases and local/distant metastases. Diagnostic performance between the three WB-MRI data sets was assessed using receiver operating characteristic (ROC) curve analysis. Imaging exams and histopathological results were used as standard of references. Results: Areas under the ROC curves of DWIBS vs. 3D-CE-T1w vs. both sequences in fused fashion were 0.97, 0.978, and 1.00, respectively. The diagnostic performance in tumor detection of fused DWIBS/3D-CE-T1w images were statistically superior to DWIBS (p < 0.001) and 3D-CE-T1w (p ≤ 0.002); while the difference between DWIBS and 3D-CE-T1w did not show statistical significance difference. Detection rates of malignancy did not differ between WB-MRI with DWIBS and 18F-FDG PET-CT. Conclusion: WB-MRI with DWIBS is to be considered as alternative tool to conventional whole-body methods for tumor staging and during follow-up in cancer patients.

A facile synthesis for cauliflower like CeO2 catalysts from Ce-BTC precursor and their catalytic performance for CO oxidation

Science.gov (United States)

Zhang, Xiaodong; Hou, Fulin; Yang, Yang; Wang, Yuxin; Liu, Ning; Chen, Dan; Yang, Yiqiong

2017-11-01

The paper presents a novel and facile method for preparing cauliflowerlike CeO2 through direct decomposition of cerium based metal-organic framework (MOF) Ce-BTC (BTC = 1,3,5-benzenetricarboxylic acid) straw in air. Several analytical tools such as Scanning electron microscopy (SEM), X-ray diffraction (XRD), Thermogravimetric (TG), N2 adsorption-desorption, Temperature programmed reduction (TPR), Raman, X-ray photoelectron spectroscopic (XPS) and Photoluminescence (PL) have been used to characterize Ce-BTC and CeO2. The Ce-BTC calcined at 500 °C (CeO2-500) maintains the morphology of its template ;Ce-BTC; and forms a special cauliflower-like structure. XRD patterns showed that the catalyst has a perfect CeO2 crystal structure and has a smaller particle size. The prepared CeO2 cauliflowers exhibit excellent catalytic activities, long-term stability, and cycling stability for CO oxidation. The improved catalytic activities could be attributed to porous nanorods of CeO2 cauliflowers, which provide more active sites and oxygen vacancy for CO oxidation.

CeO2-TiO2 Photocatalyst: Ionic Liquid-Mediated Synthesis, Characterization, and Performance for Diisopropanolamine Visible Light Degradation

Directory of Open Access Journals (Sweden)

Jagath Retchahan Sivalingam

2018-01-01

Full Text Available CeO2-TiO2 photocatalyst with Ce:Ti molar ratio of 1:9 was synthesized via co-precipitation method in the presence of 1-ethyl-3-methyl imidazolium octylsulfate, [EMIM][OctSO4] (CeO2-TiO2-IL. The ionic liquid acts as a templating agent for particle growth. The CeO2-TiO2 and TiO2 photocatalysts were also synthesized without any ionic liquid for comparison. Calcination was conducted on the as-synthesized materials at 400˚C for 2 h. The photocatalysts were characterized using diffuse reflectance UV-Vis spectroscopy (DR-UV-Vis, field emission scanning electron microscopy (FESEM, X-ray powder diffraction (XRD, and surface area and pore size analyzer (SAP. The presence of CeO2 has changed the optical property of TiO2. It has extended the absorption edge of TiO2 from UV to visible region. The calculated band gap energy decreased from 2.82 eV (TiO2 to 2.30 eV (CeO2-TiO2-IL. The FESEM morphology showed that samples forms aggregates and the surface smoothens when ionic liquid was added. The average crystallite size of TiO2, CeO2-TiO2, and CeO2-TiO2-IL were 20.8 nm, 5.5 nm, and 4 nm. In terms of performance, photodegradation of 1000 ppm of diisopropanolamine (DIPA was conducted in the presence of hydrogen peroxide (H2O2 and visible light irradiation which was provided by a 500 W halogen lamp. The best performance was displayed by CeO2-TiO2-IL calcined at 400˚C. It was able to remove 82.0% DIPA and 54.8% COD after 6 h reaction.  Copyright © 2018 BCREC Group. All rights reserved Received: 26th July 2017; Revised: 22nd October 2017; Accepted: 29th October 2017; Available online: 22nd January 2018; Published regularly: 2nd April 2018 How to Cite: Sivalingam, J.R., Kait, C.F., Wilfred, C.D. (2018. CeO2-TiO2 Photocatalyst: Ionic Liquid-Mediated Synthesis, Characterization, and Performance for Diisopropanolamine Visible Light Degradation. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (1: 170-178 (doi:10.9767/bcrec.13.1.1396.170-178

Characterizations of electrodeposited Ni–CeO{sub 2} nanocomposite coatings

Energy Technology Data Exchange (ETDEWEB)

Kasturibai, S., E-mail: s.kasturibai@yahoo.co.in [Department of Chemistry, Alagappa Government Arts College, Karaikudi 630 003, Tamilnadu (India); Advanced Nanocomposite Coatings Laboratory, Department of Industrial Chemistry, School of Chemical Sciences, Alagappa University, Karaikudi 630 003, Tamilnadu (India); Kalaignan, G. Paruthimal, E-mail: pkalaignan@yahoo.com [Advanced Nanocomposite Coatings Laboratory, Department of Industrial Chemistry, School of Chemical Sciences, Alagappa University, Karaikudi 630 003, Tamilnadu (India)

2014-10-15

The expansion of current machinery requires metallic materials with better surface properties. In the present investigation, CeO{sub 2} reinforced nickel nanocomposite coatings were deposited on mild steel substrate by direct current electrodeposition process employing nickel acetate bath. The effect of incorporation of CeO{sub 2} particles in the Ni nanocomposite coatings on the micro hardness and corrosion behaviour has been evaluated. Smooth and compact nanocomposite deposits containing well-distributed cerium oxide particles were obtained. The crystallite structure was fcc for electrodeposited nickel and Ni–CeO{sub 2} nanocomposite coatings. It has been observed that, the presence of CeO{sub 2} nanoparticles favours the [111] and [200] texture of nickel matrix. The co-deposition of CeO{sub 2} nanoparticles with nickel was found to be favoured at applied current density of 8 A dm{sup −2}. The micro hardness values of the nickel nanocomposite coatings (725 HV) was higher than that of pure nickel (265 HV).The decrease in I{sub corr} values and increase in Constant Phase Element values were investigated in 3.5% NaCl solution which showed the higher corrosion resistant nature of Ni–CeO{sub 2} coatings. - Highlights: • Ni–CeO{sub 2} composite coatings have electrodeposited from eco-friendly acetate bath. • Inclusion of CeO{sub 2} in the composite coating has refined the crystallite size. • Micro hardness values have increased with CeO{sub 2} content in the composite coatings. • The negative shift of E{sub corr} confirming cathodic protective nature of coatings.

3D cutting tool-wear monitoring in the process

Energy Technology Data Exchange (ETDEWEB)

Cerce, Luka; Pusavec, Franci; Kopac Janez [University of Ljubljana, Askerceva (Slovenia)

2015-09-15

The tool-wear of cutting tools has a very strong impact on the product quality as well as efficiency of the machining processes. Therefore, it in-the process characterization is crucial. This paper presents an innovative and reliable direct measuring procedure for measuring spatial cutting tool-wear with usage of laser profile sensor. The technique provides possibility for determination of 3D wear profiles, as advantage to currently used 2D techniques. The influence of the orientation of measurement head on the accuracy and the amount of captured reliable data was examined and the optimal setup of the measuring system was defined. Further, a special clamping system was designed to mount the measurement device on the machine tool turret. To test the measurement system, tool-life experiment was performed. Additionally, a new tool-life criterion was developed, including spatial characteristics of the tool-wear. The results showed that novel tool-wear and tool-life diagnostic represent objective and robust estimator of the machining process. Additionally, such automation of tool-wear diagnostics on machine tool provides higher productivity and quality of the machining process.

Pd/CeO2/SiC Chemical Sensors

Science.gov (United States)

Lu, Weijie; Collins, W. Eugene

2005-01-01

The incorporation of nanostructured interfacial layers of CeO2 has been proposed to enhance the performances of Pd/SiC Schottky diodes used to sense hydrogen and hydrocarbons at high temperatures. If successful, this development could prove beneficial in numerous applications in which there are requirements to sense hydrogen and hydrocarbons at high temperatures: examples include monitoring of exhaust gases from engines and detecting fires. Sensitivity and thermal stability are major considerations affecting the development of high-temperature chemical sensors. In the case of a metal/SiC Schottky diode for a number of metals, the SiC becomes more chemically active in the presence of the thin metal film on the SiC surface at high temperature. This increase in chemical reactivity causes changes in chemical composition and structure of the metal/SiC interface. The practical effect of the changes is to alter the electronic and other properties of the device in such a manner as to degrade its performance as a chemical sensor. To delay or prevent these changes, it is necessary to limit operation to a temperature sensor structures. The present proposal to incorporate interfacial CeO2 films is based partly on the observation that nanostructured materials in general have potentially useful electrical properties, including an ability to enhance the transfer of electrons. In particular, nanostructured CeO2, that is CeO2 with nanosized grains, has shown promise for incorporation into hightemperature electronic devices. Nanostructured CeO2 films can be formed on SiC and have been shown to exhibit high thermal stability on SiC, characterized by the ability to withstand temperatures somewhat greater than 700 C for limited times. The exchanges of oxygen between CeO2 and SiC prevent the formation of carbon and other chemical species that are unfavorable for operation of a SiC-based Schottky diode as a chemical sensor. Consequently, it is anticipated that in a Pd/CeO2/SiC Schottky

Phase evolution and aqueous durability of Zr{sub 1−x−y}Ce{sub x}Nd{sub y}O{sub 2−y/2} ceramics designed to immobilize actinides with multi-valences

Energy Technology Data Exchange (ETDEWEB)

Ding, Yi, E-mail: dingyi2279@126.com [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang, Sichuan, 621900 (China); Key Subject Laboratory of National Defense for Radioactive Waste and Environmental Security, Southwest University of Science and Technology, Mianyang 621010 (China); Long, Xinggui, E-mail: xingguil@caep.cn [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang, Sichuan, 621900 (China); Peng, Shuming [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang, Sichuan, 621900 (China); Zhang, Dong, E-mail: zd0823@sina.com [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang, Sichuan, 621900 (China); Tan, Zhaoyi [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang, Sichuan, 621900 (China); Lu, Xirui [Key Subject Laboratory of National Defense for Radioactive Waste and Environmental Security, Southwest University of Science and Technology, Mianyang 621010 (China)

2017-04-15

Zr{sub 1−x−y}Ce{sub x}Nd{sub y}O{sub 2−y/2} ceramics, which were designed as waste form materials, were obtained by simultaneous substitution of Ce{sup 4+} and Nd{sup 3+} for Zr{sup 4+} in ZrO{sub 2}. The influences of the simultaneous substitution of Ce and Nd on phase transformation of ZrO{sub 2} were investigated systematically. Also, the aqueous durability of the ceramics was evaluated. The results show that the phase transformation caused by the simultaneous substitution mainly relates to the total content of Ce and Nd. The ZrO{sub 2} ceramics containing Ce + Nd < 30 mol% exhibit both monoclinic and cubic phases, while the ceramics containing Ce + Nd ≥ 30 mol% are cubic phase. And the cubic phase can be stabilized by incorporating 30 mol% Ce + Nd. Moreover, LR{sub i} are modified by the incorporation of Ce and Nd, because of the presence of oxygen vacancies. The Nd and Ce co-doped zirconia waste form exhibit excellent aqueous durability (∼10{sup −5} g m{sup −2} d{sup −1}). - Highlights: •Zr{sub 1−x−y}Ce{sub x}Nd{sub y}O{sub 2−y/2} were obtained by substitution of Ce and Nd for Zr in ZrO{sub 2}. •Phase transformation mainly relates to the total content of Ce and Nd. •Samples with Ce + Nd < 30 mol% show monoclinic and cubic phases, while ≥30 mol% are cubic. •Stabilized cubic zirconia can be obtained by doping with 30 mol% Ce and Nd. •LR{sub Ce} and LR{sub Nd} (42 d) are ∼ 10{sup −5} g m{sup −2} d{sup −1}, exhibiting excellent aqueous durability.

Study of structural and transport properties of nanostructured CeO{sub 2}, Ce{sub 1-x}Ru{sub x}O{sub 2} and Ce{sub 1-x}In{sub x}O{sub 2} thin films

Energy Technology Data Exchange (ETDEWEB)

Rangel, R.; Chavez-Chavez, L. [Division de Estudios de Posgrado, Facultad de Ingenieria Quimica, Universidad Michoacana de S.N.H. (Mexico); Martinez, E. [Centro de Investigacion en Materiales Avanzados, S.C. (CIMAV), Nuevo Leon (Mexico); Bartolo-Perez, P. [Departamento de Fisica Aplicada, CINVESTAV-IPN, Merida, Yucatan (Mexico)

2012-06-15

The present work reports for the first time thin films prepared from Ce{sub 1-x}M{sub x}O{sub 2-{delta}} (M = Ru, In) solid solutions for application as gas sensors. The CeO{sub 2}, Ce{sub 0.95}Ru{sub 0.05}O{sub 2} and Ce{sub 0.95}In{sub 0.05}O{sub 2} thin films were prepared by means of the RF sputtering process onto Si (111) substrates. The deposition conditions were carried out at 500 C varying the deposition time. Targets were prepared via sol-gel process starting from C{sub 6}H{sub 9}O{sub 6}In, Ru{sub 3}(CO){sub 12} and Ce(C{sub 2}H{sub 3}O{sub 2}){sub 3} . 1.5H{sub 2}O compounds and using a ceramic method to consolidate them. The samples were characterized by means of XRD, SEM, and AFM. Their thickness was measured using a profilometer. The results herein obtained regarding the microstructure and transport properties indicate that these materials can be used as gas sensors. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Photoluminescent properties of Sr2CeO4: Eu3+ and Sr2CeO4: Eu2+ phosphors suitable for near ultraviolet excitation

International Nuclear Information System (INIS)

Suresh, K.; Poornachandra Rao, N.V.; Murthy, K.V.R.

2014-01-01

Powder phosphors of 1 mol% Eu 3+ - and Eu 2+ -doped strontium cerium oxide (Sr 2 CeO 4 ) were synthesized by standard solid-state reaction method. Eu 3+ - and Eu 2+ -doped Sr 2 CeO 4 phosphors fired at 1100 ℃ for 2 h were analysed by X-ray diffraction (XRD) and photoluminescence (PL) techniques. The XRD patterns confirm that the obtained phosphors are a single phase of Sr 2 CeO 4 composed of orthorhombic structure. Room temperature PL excitation spectrum of air-heated Sr 2 CeO 4 : Eu phosphor has exhibited bands at 260, 280 and 350 nm. Whereas the excitation spectrum of Sr 2 CeO 4 : Eu phosphor heated under reducing (carbon) atmosphere exhibited single broadband range from 260 to 390 nm. The (PL) emission peaks of both the phosphors at 467 (blue), 537 (green) and 616 nm (red) generate white light under 260, 280 and 350 nm excitation wavelengths. The Commission International de l'Eclairage (CIE) colour coordinates conforms that these phosphors emitting white light. The results reveal that these phosphors are multifunctional phosphors which emit white light under these excitations that they could be used as white components for display and lamp devices and as well as possible good light-conversion phosphor LEDs under near-ultraviolet (nUV) chip. (author)

Anisotropic Transport and Magnetic Properties of Charge-Density-Wave Materials RSeTe_2 (R = La, Ce, Pr, Nd)

International Nuclear Information System (INIS)

Wang Pei-Pei; Long Yu-Jia; Zhao Ling-Xiao; Chen Dong; Xue Mian-Qi; Chen Gen-Fu

2015-01-01

Single crystals of RSeTe_2 (R = La, Ce, Pr, Nd) are synthesized using LiCl/RbCl flux. Transport and magnetic properties in the directions parallel and perpendicular to the a–c plane are investigated. We find that the resistivity anisotropy ρ_⊥/ρ_‖ lies in the range 486–615 for different compounds at 2 K, indicating the highly two-dimensional character. In both the orientations, the charge-density-wave transitions start near T_C_D_W = 284(3) K, 316(3) K, 359(3) K for NdSeTe_2, PrSeTe_2, CeSeTe_2, respectively, with a considerable increase in dc resistivity. While for LaSeTe_2, no obvious resistivity anomaly is observed up to 380 K. The value of T_C_D_W increases monotonically with the increasing lattice parameters. Below T_C_D_W, slight anomalies can be observed in NdSeTe_2, PrSeTe_2 and CeSeTe_2 with onset temperature at 193(3) K, 161(3) K, 108(3) K, respectively, decreasing as lattice parameters increase. Magnetic susceptibility measurements show that the valence state of rare earth ions are trivalence in these compounds. Antiferromagnetic-type magnetic order is formed in CeSeTe_2 at 2.1 K, while no magnetic transition is observed in PrSeTe_2 and NdSeTe_2 down to 1.8 K. (paper)

Sr2CeO4: Electronic and structural properties

International Nuclear Information System (INIS)

Rocha, Leonardo A.; Schiavon, Marco A.; Nascimento, Clebio S.; Guimarães, Luciana; Góes, Márcio S.; Pires, Ana M.; Paiva-Santos, Carlos O.

2014-01-01

Highlights: • Sr 2 CeO 4 it was obtained from the heat treatment of Ce 3+ -doped strontium oxalate. • Rietveld analysis made it possible to obtain information about crystalline structure. • Experimental band gap value was compared with theoretical obtained by Sparkle/PM7. • The materials obtained shows intense photoluminescence and scintillator properties. - Abstract: This work presents on the preparation and photoluminescent properties of Sr 2 CeO 4 obtained from the heat treatment of Ce(III)-doped strontium oxalate (10, 25 and 33 mol%). The oxalate precursors were heat treated at 1100 °C for 12 h. The structure of this photoluminescent material was evaluated by the Rietveld method. The route used in this work to prepare the materials showed to be viable when compared to other synthesis reported in the literature. The Sr 2 CeO 4 material showed a broad and intense band emission with a maximum around 485 nm. The quantitative phase analysis showed that the Sr 2 CeO 4 photoluminescent phase is the majority one compared to the impurity phases of SrCeO 3 and SrCO 3 . From all results it was possible to verify a complete elimination of the CeO 2 phase for the sample obtained from the heat treatment of oxalate precursor containing 33 mol% of cerium(III). The material showed excellent properties for possible candidate as scintillator materials, and in the improvement of efficiency of solar cells when excited in the UV–vis region. The CIE chromaticity diagram it is also reported in this work

Spray deposited CeO2–TiO2 counter electrode for electrochromic ...

Indian Academy of Sciences (India)

Abstract. Optically passive thin films of CeO2–TiO2 mixed oxides with molar ratio of Ce/Ti of 0.05 were deposited by the spray pyrolysis technique (SPT) on a glass and fluorine-doped tin oxide (FTO)-coated glass substrates. Precur- sor solution containing cerium nitrate hexahydrate (Ce(NO3)2·6H2O) and titanium ...

Influence of yttrium content on the Ce.sub.Lu1./sub. and Ce.sub.Lu2./sub. luminescence characteristics in (Lu.sub.1-x./sub.Y.sub.x./sub.).sub.2./sub.SiO.sub.5./sub.: Ce single crystal

Czech Academy of Sciences Publication Activity Database

Jarý, Vítězslav; Nikl, Martin; Ren, G.; Horodysky, P.; Pazzi, G.P.; Kučerková, Romana

2011-01-01

Roč. 34, č. 2 (2011), s. 428-432 ISSN 0925-3467 R&D Projects: GA MŠk(CZ) ME10084; GA AV ČR IAA100100810 Institutional research plan: CEZ:AV0Z10100521 Keywords : scintillator * excited state ionization * temperature dependence * L(Y)SO: Ce Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.023, year: 2011

Determination of tropane alkaloids by heart cutting reversed phase - Strong cation exchange two dimensional liquid chromatography.

Science.gov (United States)

Long, Zhen; Zhang, Yanhai; Gamache, Paul; Guo, Zhimou; Steiner, Frank; Du, Nana; Liu, Xiaoda; Jin, Yan; Liu, Xingguo; Liu, Lvye

2018-01-01

Current Chinese Pharmacopoeia (ChP) standards apply liquid extraction combined with one dimensional liquid chromatography (1DLC) method for determining alkaloids in herbal medicines. The complex pretreatments lead to a low analytical efficiency and possible component loss. In this study, a heart cutting reversed phase - strong cation exchange two dimensional liquid chromatography (RP - SCX 2DLC) approach was optimized for simultaneously quantifying tropane alkaloids (anisodine, scopolamine and hyoscyamine) in herbal medicines and herbal medicine tablets without further treatment of the filtered extract. The chromatographic conditions were systematically optimized in terms of column type, mobile phase composition and flow rate. To improve peak capacity and obtain symmetric peak shape of alkaloids, a polar group embedded C18 column combined with chaotropic salts was used in the first dimension. To remove the disturbance of non-alkaloids, achieve unique selectivity and acquire symmetric peak shape of alkaloids, an SCX column combined with phosphate buffer was used in the second dimension. Method validation was performed in terms of linearity, precision (0.54-0.82%), recovery (94.1-105.2%), limit of detection (LOD) and limit of quantification (LOQ) of the three analytes varied between 0.067-0.115mgL -1 and 0.195-0.268mgL -1 , respectively. The method demonstrated superiority over 1DLC method in respect of resolution (less alkaloid co-eluted), sample preparation (no pretreatment procedure) and transfer rate (minimum component loss). The optimized RP - SCX 2DLC approach was subsequently applied to quantify target alkaloids in five herbal medicines and herbal medicine tablets from three different manufactures. The results demonstrated that the developed heart cutting RP - SCX 2DLC approach represented a new, strategically significant methodology for the quality evaluation of tropane alkaloid in related herbal medicines that involve complex chemical matrix. Copyright �

Silver ion chromatography for peak resolution enhancement: Application to the preparative separation of two sesquiterpenes using online heart-cutting LC-LC technique.

Science.gov (United States)

Yang, Yang; Zhang, Yongmin; Wei, Chong; Li, Jing; Sun, Wenji

2018-09-01

Silver ion chromatography, utilizing columns packed with silver ions bonded to silica gel, has proved to be an invaluable technique for the analysis of some positional isomers. In this work, silver ion chromatography by combination with online heart-cutting LC-LC technique for the preparative separation of two sesquiterpenes positional isomers from a natural product was investigated. On the basis of the evaluation that silver ion content impacts on the separation, the laboratory-made silver ion columns, utilizing silica gel impregnated with 15% silver nitrate as column packing materials, were used for peak resolution improvement of these two isomers and the preparative separation of them in heart-cutting LC-LC. The relationship among the maximal sample load, flow rate and peak resolution in the silver ion column were optimized, and the performance of the silver ion column was compared with conventional C 18 column and silica gel column. Based on the developed chromatographic conditions, online heart-cutting LC-LC chromatographic separation system in combination with a silica gel column and a silver ion column that was applied to preparative separation of these two isomers from a traditional Chinese medicine, Inula racemosa Hook.f., was established. The results showed that the online heart-cutting LC-LC technique by combination of a silica gel column and a silver ion column for the preparative separation of these two positional isomers from this natural plant was superior to the preparative separation performed on a single-column system with C 18 column or silica gel column. Copyright © 2018 Elsevier B.V. All rights reserved.

Facile hydrothermal synthesis of CeO2 nanopebbles

Indian Academy of Sciences (India)

Administrator

However, to the best of our knowledge the reports on the synthesis of CeO2 ... The base pressure of the XAS chamber was in the range of 10–8 Pa. A Shimadzu ... scopy was investigated to confirm the crystalline quality of CeO2 nanopebbles.

Blue and green emission from Ce3+ and Tb3+ co-doped Y2O3 nanoparticles

International Nuclear Information System (INIS)

Loitongbam, Romeo Singh; Singh, W. Rameshwor; Phaomei, Ganngam; Singh, N. Shanta

2013-01-01

Tb 3+ doped Y 2 O 3 nanoparticles of 4–10 nm size were synthesized from nitrate precursors by the urea hydrolysis method in ethylene glycol medium at a low temperature of 140 °C. Characteristic green emission of Tb 3+ corresponding to 5 D 4 → 7 F J is observed to be very strong, which is further enhanced with heat treatment temperature. Characteristic blue color emission of Ce 3+ ion originating from 5d→ 2 F 7/2 (424 nm) and 2 F 5/2 (486 nm) transitions are found to be very strong in as-synthesized Ce 0.02 Tb 0.06 Y 1.92 O 3 nanoparticles. However, its luminescence intensity decreases with increase in heating temperature or increase in the particle size/crystallinity, whereas a weak emission peak of Tb 3+ ion at 545 nm is witnessed. The polycrystalline nature of the as-prepared sample changed to highly crystalline state when heated at an elevated temperature (1200 °C). -- Highlights: • Y 2 O 3 nanoparticles doped with Tb 3+ and Ce 3+ of 4–10 nm are synthesized. • Strong green emission of Tb 3+ from 5 D 4 → 7 F J transition is observed. • Strong blue emission of Ce 3+ from 5d→ 2 F 7/2 and 2 F 5/2 transitions is observed. • Ce 3+ emission decreases with annealing or increase in particle size. • Such nanoparticles can be used in LEDs and bio-labeling

Preparation and characterization of Ce-doped HfO2 nanoparticles

International Nuclear Information System (INIS)

Gálvez-Barboza, S.; González, L.A.; Puente-Urbina, B.A.; Saucedo-Salazar, E.M.; García-Cerda, L.A.

2015-01-01

Highlights: • Ce-doped HfO 2 nanoparticles were prepared by a modified solgel method. • Ce-doped HfO 2 nanoparticles have a semispherical shape with sizes between 6 and 11.5 nm. • The samples doped with 10% in weight of Ce directly crystallized in a cubic structure. • A quick, straightforward and effective route for the preparation of Ce-doped nanoparticles. - Abstract: A modified solgel method to synthesize Ce-doped HfO 2 nanoparticles was carried out using a precursor material prepared with cerium nitrate, hafnium chloride, citric acid and ethylene glycol. The obtained precursor material was calcined at 500 and 700 °C for 2 h in air. The influence of the concentration of Ce and the calcination temperature was studied to observe the structural and morphological changes of the obtained materials. For the characterization, X-ray diffraction (XRD), transmission electron microscopy (TEM) and Raman scattering (RS) were employed. The XRD patterns shown that the Ce-doped HfO 2 undergoes a structural transformation from monoclinic to cubic phase, which is significantly dependent on the Ce content and calcination temperature. TEM images have also confirmed the existence of semispherical nanoparticles with sizes between 6 and 11.5 nm

Association between vitamin D deficiency and heart failure risk in the elderly.

Science.gov (United States)

Porto, Catarina Magalhães; Silva, Vanessa De Lima; da Luz, João Soares Brito; Filho, Brivaldo Markman; da Silveira, Vera Magalhães

2018-02-01

The aim of this study was to evaluate the association between vitamin D deficiency and risk of heart failure in elderly patients of cardiology outpatient clinics. A cross-sectional study with an analytical approach was employed. Clinical data were collected from the elderly from August 2015 to February 2016. The dependent variable was the risk of heart failure; the independent variable was vitamin D deficiency; and intervening factors were age, gender, education, ethnicity, hypertension, diabetes mellitus, hypothyroidism, renal failure, dementia, stroke, dyslipidaemia, depression, smoking, alcoholism, obesity, andropause, and cardiac arrhythmia. To analyse the association between vitamin D deficiency and risk of heart failure, we used the bivariate logistic analysis, followed by analysis through the multivariate logistic regression model. Of the 137 elderly, the study found the following: women (75.9%); overweight (48.2%); obese (30.6%); increase in the index waist/hip (88.3%); dyslipidaemia (94.2%) and hypertension (91.2%); coronary artery disease (35.0%); and 27.7% with cardiac arrhythmia or left ventricular hypertrophy. Sixty-five per cent of the elderly were deficient in vitamin D. The risk of heart failure was significantly associated with vitamin D deficiency [odds ratio (OR): 12.19; 95% confidence interval (CI) = 4.23-35.16; P = 0.000], male gender (OR: 15.32; 95% CI = 3.39-69.20, P = 0.000), obesity (OR: 4.17; 95% CI = 1.36-12.81; P = 0.012), and cardiac arrhythmia (OR: 3.69; 95% CI = 1.23-11.11; P = 0.020). There was a high prevalence of vitamin D deficiency in the elderly, and the evidence shows a strong association between vitamin D deficiency and increased risk of heart failure in this population. © 2017 The Authors. ESC Heart Failure published by John Wiley & Sons Ltd on behalf of the European Society of Cardiology.

Role of beta 1-4 linked polymers in the biofilm structure of marine Pseudomonas sp. CE-2 on 304 stainless steel coupons.

Science.gov (United States)

Jain, Anand; Bhosle, Narayan B

2008-01-01

Pseudomonas sp CE-2 cells attach and form biofilms on 304-stainless steel (SS) coupons. A series of experiments were carried out in order to understand the role of exopolysaccharides (EPS) in the formation and maintenance of CE-2 biofilms on SS coupons. The biofilm density and EPS concentration increased over the period of incubation and the highest values for both were recorded after 72 h. Calcofluor and the lectin concanavalin A (Con A) showed a positive interaction with 72-h old biofilms, indicating the presence of beta 1-4 linked polymers, and alpha-d-glucose and alpha-d-mannose in the biofilm matrix of CE-2. When the CE-2 cells were grown in the presence of calcofluor (200 microg ml(-1)), biofilm formation was significantly reduced (approximately 85%). Conversely, the lectins Con A or WGA did not influence the CE-2 biofilms on the SS coupons. Furthermore, treatment with cellulase, an enzyme specific for the degradation of beta 1-4 linked polymers, removed substantial amounts of CE-2 biofilm from SS coupons. These results strongly suggest the involvement of beta 1-4 linked polymers in the formation and maintenance of Pseudomonas sp. CE-2 biofilms on SS coupons.

The effect of Ce ion substituted OMS-2 nanostructure in catalytic activity for benzene oxidation

Science.gov (United States)

Hou, Jingtao; Li, Yuanzhi; Mao, Mingyang; Zhao, Xiujian; Yue, Yuanzheng

2014-11-01

and facile strategy of synthesizing these unique Ce ion substituted OMS-2 nanostructure with Mn vacancies in the framework by hydrothermal redox reaction between Ce(NO3)3 and KMnO4 with KMnO4/Ce(NO3)3 at a molar ratio of 3 : 1 at 120 °C. Compared to pure OMS-2, the produced catalyst of Ce ion substituted OMS-2 ultrathin nanorods exhibits an enormous enhancement in the catalytic activity for benzene oxidation, which is evidenced by a significant decrease (ΔT50 = 100 °C, ΔT90 = 129 °C) in the reaction temperature of T50 and T90 (corresponding to the benzene conversion = 50% and 90%), which is considerably more efficient than the expensive supported noble metal catalyst (Pt/Al2O3). We combine both theoretical and experimental evidence to provide a new physical insight into the significant effect due to the defects induced by the Ce ion substitution on the catalytic activity of OMS-2. The formation of unique Ce ion substituted OMS-2 nanostructure with Mn vacancies in the framework leads to a significant enhancement of the lattice oxygen activity, thus tremendously increasing the catalytic activity. Electronic supplementary information (ESI) available: N2 adsorption-desorption isotherm, TEM, XRD, and Ce 3d XPS spectra of the samples. See DOI: 10.1039/c4nr04142a

Preparation and Characterization of Graphite Waste/CeO2 Composites

Science.gov (United States)

Kusrini, E.; Utami, C. S.; Nasruddin; Prasetyanto, E. A.; Bawono, Aji A.

2018-03-01

In this research, the chemical modification of graphite waste with CeO2 was developed and characterized. Graphite waste was pretreated with mechanical to obtain the size 200 mesh (75 μm), and thermal methods at 110°C oven for 6 hours. Here, we demonstrate final properties of graphite before modification (GBM), activated graphite (GA) and graphite/CeO2 composite with variation of 0.5, 1 and 2 g of CeO2 (G0.5; G1; G2). The effect of CeO2 concentration was observed. The presence of cerium in modified graphite samples (G0.5; G1; G2) were analyzed using SEM-EDX. The results show that the best surface area was found in G2 is 26.82 m2/g. The presence of CeO2 onto graphite surface does not significantly increase the surface area of composites.

Surface Reduced CeO2 Nanowires for Direct Conversion of CO2 and Methanol to Dimethyl Carbonate: Catalytic Performance and Role of Oxygen Vacancy

Directory of Open Access Journals (Sweden)

Zhongwei Fu

2018-04-01

Full Text Available Ultralong 1D CeO2 nanowires were synthesized via an advanced solvothermal method, surface reduced under H2 atmosphere, and first applied in direct synthesis of dimethyl carbonate (DMC from CO2 and CH3OH. The micro morphologies, physical parameters of nanowires were fully investigated by transmission electron microscopy (TEM, X-ray diffraction (XRD, N2 adsorption, X-ray photoelectron spectrum (XPS, and temperature-programmed desorption of ammonia/carbon dioxide (NH3-TPD/CO2-TPD. The effects of surface oxygen vacancy and acidic/alkaline sites on the catalytic activity was explored. After reduction, the acidic/alkaline sites of CeO2 nanowires can be dramatically improved and evidently raised the catalytic performance. CeO2 nanowires reduced at 500 °C (CeO2_NW_500 exhibited notably superior activity with DMC yield of 16.85 mmol gcat−1. Furthermore, kinetic insights of initial rate were carried out and the apparent activation energy barrier of CeO2_NW_500 catalyst was found to be 41.9 kJ/mol, much tiny than that of CeO2_NW catalyst (74.7 KJ/mol.

Attapulgite-CeO2/MoS2 ternary nanocomposite for photocatalytic oxidative desulfurization

Science.gov (United States)

Li, Xiazhang; Zhang, Zuosong; Yao, Chao; Lu, Xiaowang; Zhao, Xiaobing; Ni, Chaoying

2016-02-01

Novel attapulgite(ATP)-CeO2/MoS2 ternary nanocomposites were synthesized by microwave assisted assembly method. The structures of the nanocomposites were characterized by XRD, FT-IR, UV-vis, XPS and in situ TEM. The photocatalytic activities of ATP-CeO2/MoS2 composites were investigated by degradating dibenzothiophene (DBT) in gasoline under visible light irradiation. The effect of the mass ratio of CeO2 to MoS2 on photocatalytic activity was investigated. The results indicate that the three-dimensional network structure is firmly constructed by ATP skeleton, CeO2 particles and MoS2 nanosheet which effectively increase the surface area of the composites and promote the separation of electrons and holes by resulting electronic transmission channels of multi-channel in space. The degradation rate of DBT can reach 95% under 3 h irradiation when the mass ratio of CeO2/MoS2 is 4/10. A plausible mechanism for the photocatalytic oxidative desulfurization of this nanocomposite is put forward.

Inverse CeO2sbnd Fe2O3 catalyst for superior low-temperature CO conversion efficiency

Science.gov (United States)

Luo, Yongming; Chen, Ran; Peng, Wen; Tang, Guangbei; Gao, Xiaoya

2017-09-01

The paper presents a rational design of highly efficient and affordable catalysts for CO oxidation with a low operating temperature. A series of ceria-iron catalysts were inversely built via a co-precipitation method. The catalytic activity of low-temperature CO oxidation was much higher with CeO2-modified Fe2O3 (CeO2sbnd Fe2O3) than with Fe2O3-modified CeO2 (Fe2O3sbnd CeO2). In particular, the 7.5% CeO2sbnd Fe2O3 catalyst had the highest activity, reaching 96.17% CO conversion at just 25 °C. Catalyst characterization was carried out to explore the cause of the significantly different CO conversion efficiencies between the Fe2O3sbnd CeO2 and Fe2O3sbnd CeO2 catalysts. HRTEM showed a significant inhomogeneous phase in 7.5% CeO2sbnd Fe2O3 with small CeO2 nanoparticles highly dispersed on the rod-shaped Fe2O3 surface. Furthermore, the 7.5% CeO2sbnd Fe2O3 composite catalyst exhibited the highest ratios of Fe2+/Fe3+ and Ce3+/Ce4+ as well as the largest pore volume. These properties are believed to benefit the CO conversion in 7.5% CeO2sbnd Fe2O3.

Color-tunable and white luminescence properties via energy transfer in single-phase KNaCa2(PO4)2:A (A = Ce3+, Eu2+, Tb3+, Mn2+, Sm3+) phosphors.

Science.gov (United States)

Geng, Dongling; Shang, Mengmeng; Zhang, Yang; Lian, Hongzhou; Lin, Jun

2013-12-02

A series of single-phase phosphors based on KNaCa2(PO4)2 (KNCP):A (A = Ce(3+), Eu(2+), Tb(3+), Mn(2+), Sm(3+)) have been prepared via the Pechini-type sol-gel method. Photoluminescence (PL) and cathodoluminescence (CL) properties of Ce(3+)-, Eu(2+)-, Tb(3+)-, Mn(2+)-, and Sm(3+)-activated KNCP phosphors were investigated. For the A singly doped KNCP samples, they exhibit the characteristic emissions of the A activator. Na(+) ions exhibit the best charge compensation result among Li(+), Na(+), and K(+) ions for Ce(3+)-, Tb(3+)-, and Sm(3+)-doped KNCP samples. The energy transfers from Ce(3+) to Tb(3+) and Mn(2+) ions as well as Eu(2+) to Tb(3+) and Mn(2+) have been validated. The emission colors of KNCP:Ce(3+)/Eu(2+), Tb(3+)/Mn(2+), Na(+) samples can be adjusted by energy transfer process and changing the Tb(3+)/Mn(2+) concentration. More importantly, white light emission in KNCP:Eu(2+), Mn(2+) system has been obtained. The KNCP:Tb(3+), Na(+) sample shows tunable luminescence from blue to cyan and then to green with the change of Tb(3+) concentration due to the cross-relaxation from (5)D3 to (5)D4. A white emission can also be realized in the single-phase KNCP host by reasonably adjusting the doping concentrations of Tb(3+) and Sm(3+) (reddish-orange emission) under low-voltage electron beam excitation. Additionally, the temperature-dependent PL properties of as-prepared phosphors reveal that the KNCP host has good thermal stability. Therefore, the KNCP:A (A = Ce(3+), Eu(2+), Tb(3+), Mn(2+), Sm(3+)) phosphors could be regarded as good candidates for UV W-LEDs and FEDs.

Stability of engineered nanomaterials in complex aqueous matrices: Settling behaviour of CeO{sub 2} nanoparticles in natural surface waters

Energy Technology Data Exchange (ETDEWEB)

Van Koetsem, Frederik, E-mail: Frederik.VanKoetsem@UGent.be [Laboratory of Analytical Chemistry and Applied Ecochemistry, Department of Applied Analytical and Physical Chemistry, Faculty of Bioscience Engineering, Ghent University, Coupure Links 653, Ghent (Belgium); Verstraete, Simon [Laboratory of Analytical Chemistry and Applied Ecochemistry, Department of Applied Analytical and Physical Chemistry, Faculty of Bioscience Engineering, Ghent University, Coupure Links 653, Ghent (Belgium); Van der Meeren, Paul [Particle and Interfacial Technology Group, Department of Applied Analytical and Physical Chemistry, Faculty of Bioscience Engineering, Ghent University, Coupure Links 653, Ghent (Belgium); Du Laing, Gijs, E-mail: Gijs.DuLaing@UGent.be [Laboratory of Analytical Chemistry and Applied Ecochemistry, Department of Applied Analytical and Physical Chemistry, Faculty of Bioscience Engineering, Ghent University, Coupure Links 653, Ghent (Belgium)

2015-10-15

The stability of engineered nanoparticles (ENPs) in complex aqueous matrices is a key determinant of their fate and potential toxicity towards the aquatic environment and human health. Metal oxide nanoparticles, such as CeO{sub 2} ENPs, are increasingly being incorporated into a wide range of industrial and commercial applications, which will undoubtedly result in their (unintentional) release into the environment. Hereby, the behaviour and fate of CeO{sub 2} ENPs could potentially serve as model for other nanoparticles that possess similar characteristics. The present study examined the stability and settling of CeO{sub 2} ENPs (7.3±1.4 nm) as well as Ce{sup 3+} ions in 10 distinct natural surface waters during 7 d, under stagnant and isothermal experimental conditions. Natural water samples were collected throughout Flanders (Belgium) and were thoroughly characterized. For the majority of the surface waters, a substantial depletion (>95%) of the initially added CeO{sub 2} ENPs was observed just below the liquid surface of the water samples after 7 d. In all cases, the reduction was considerably higher for CeO{sub 2} ENPs than for Ce{sup 3+} ions (<68%). A first-order kinetics model was able to describe the observed time-dependant removal of both CeO{sub 2} ENPs (R{sup 2}≥0.998) and Ce{sup 3+} ions (R{sup 2}≥0.812) from the water column, at least in case notable sedimentation occurred over time. Solution-pH appeared to be a prime parameter governing nanoparticle colloidal stability. Moreover, the suspended solids (TSS) content also seemed to be an important factor affecting the settling rate and residual fraction of CeO{sub 2} ENPs as well as Ce{sup 3+} ions in natural surface waters. Correlation results also suggest potential association and co-precipitation of CeO{sub 2} ENPs with aluminium- and iron-containing natural colloidal material. The CeO{sub 2} ENPs remained stable in dispersion in surface water characterized by a low pH, ionic strength (IS), and

Luminescence in Eu2+ and Ce3+ doped SrCaP2O7 phosphors

Directory of Open Access Journals (Sweden)

K.N. Shinde

Full Text Available Eu2+ and Ce3+ doped SrCaP2O7 has been achieved by modified solid state diffusion in reducing atmosphere. The prepared phosphor powders have been identified by their characteristic X-ray diffraction patterns. The mixed phases of α-Sr2P2O7 type with orthorhombic and α-Ca2P2O7 type with monoclinic form were investigated. Its excitation wavelength ranging from 250 to 430 nm fits well with the characteristic emission of UV light-emitting diode (LED. The excitation and emission spectra indicate that these phosphors can be effectively excited by the near-UV light, and emits blue (visible range due to 4f7 → 4f65d1 transition of Eu2+ particularly, SrCaP2O7: Eu2+ whereas, photoluminescence excitation spectrum measurements of Ce3+ activated SrCaP2O7 shows that the phosphor can be efficiently excited by UV–Vis light from 280 to 310 nm to realize emission in the near visible range due to the 5d–4f transition of Ce3+ ions which is applicable for scintillation purpose. The impacts of doping of divalent europium and trivalent cerium on photoluminescence properties on SrCaP2O7 pyrophosphate phosphors were investigated and I propose a feasible interpretation. Keywords: Phosphor, Luminescence, XRD, LED, FTIR

PET tomographic 2-D and/or 3-D imaging of nitrogen-13, derived from 13N-amino acids, in the heart, pancreas, liver

International Nuclear Information System (INIS)

Myers, W.G.; Bigler, R.E.; Gelbard, A.S.; Benua, R.S.; Graham, M.C.; Laughlin, J.S.

1982-01-01

The loci of accumulations of Nitrogen-13, derived from enzymatically-synthesized, intravenously-injected, natural L-forms of (N-13)-L-Glutamate, (N-13)-L-Leucine, (N-13)-L-Valine, or (N-13)-L-Methionine, were determined in situ in several organs after a large meal. The images were made with the first commercial version of the MGH ''positron'' camera. When operated in the transverse, coronal, 2-D mode, high concentrations of N-13 were found consistently in the Heart and Pancreas, and lesser amounts in the Liver, after (N-13)-Glutamate or (N-13)-L-Leucine. Little accumulation occurred in the Heart after (N-13)-L-Methionine or (N-13)-L-Valine. High concentrations of N-13 were found in the Pancreas after the (N-13)-L-Methionine or (N-13)-L-Valine. When the PCT-4200 instrument was operated in the 3-D orthogonal mode, following intravenous (N-13)-L-Glutamate, five transverse 1.0-cm-thick slice images were made at 1.4-cm sequential spacings, both of the Heart and of the Pancreas. The computer simultaneously collected the data for reconstrutions subsequently of all ten image slices through both the Heart and the Pancreas

D-cycloserine combined with cue exposure therapy fails to attenuate subjective and physiological craving in cocaine dependence.

Science.gov (United States)

Santa Ana, Elizabeth J; Prisciandaro, James J; Saladin, Michael E; McRae-Clark, Aimee L; Shaftman, Stephanie R; Nietert, Paul J; Brady, Kathleen T

2015-04-01

Based on preclinical studies showing that the partial N-methyl-D-aspartate (NMDA) agonist D-cycloserine (DCS) facilitates extinction of cocaine self-administration and cocaine-induced conditioned place preference, we evaluated whether 50 mg of DCS would reduce craving to cocaine cues when combined with cue exposure (CE) in cocaine dependent humans. In this double-blind placebo-controlled pilot study, 47 cocaine dependent participants were randomized to DCS or placebo (PBO), plus CE. Participants received DCS or PBO 30 minutes prior to two CE sessions, conducted one day apart. Craving and heart rate was assessed prior to CE sessions, during CE trials, and after CE trials. These measures were assessed again at a 1-week follow-up (session 3) after the second CE session. DCS failed to significantly attenuate cocaine cue reactivity based on subjective craving and physiological reactivity (heart rate) compared to PBO. The CE protocol, consisting of repeated exposure to drug cues combined with skills training, resulted in extinction to cocaine cues as suggested by decreased craving within and between sessions in both treatment conditions. All participants exhibited elevated heart rate with repeated exposures, demonstrating a potentiation in heart rate between sessions. 50 mg of DCS may not be effective for extinguishing reactivity to drug cues for individuals with cocaine dependence. Future studies examining the effect of DCS on facilitating extinction to drug cues should examine variations in cue exposure length, number of CE presentations, and timing of DCS dose administration prior to cue exposures, which may differentially impact drug cue reactivity. © American Academy of Addiction Psychiatry.

Analysis of the heat affected zone in CO2 laser cutting of stainless steel

Directory of Open Access Journals (Sweden)

Madić Miloš J.

2012-01-01

Full Text Available This paper presents an investigation into the effect of the laser cutting parameters on the heat affected zone in CO2 laser cutting of AISI 304 stainless steel. The mathematical model for the heat affected zone was expressed as a function of the laser cutting parameters such as the laser power, cutting speed, assist gas pressure and focus position using the artificial neural network. To obtain experimental database for the artificial neural network training, laser cutting experiment was planned as per Taguchi’s L27 orthogonal array with three levels for each of the cutting parameter. Using the 27 experimental data sets, the artificial neural network was trained with gradient descent with momentum algorithm and the average absolute percentage error was 2.33%. The testing accuracy was then verified with 6 extra experimental data sets and the average predicting error was 6.46%. Statistically assessed as adequate, the artificial neural network model was then used to investigate the effect of the laser cutting parameters on the heat affected zone. To analyze the main and interaction effect of the laser cutting parameters on the heat affected zone, 2-D and 3-D plots were generated. The analysis revealed that the cutting speed had maximum influence on the heat affected zone followed by the laser power, focus position and assist gas pressure. Finally, using the Monte Carlo method the optimal laser cutting parameter values that minimize the heat affected zone were identified.

Superconductivity in CeCu/sub 2/Si/sub 2/: dependence of Tsub(c) on alloying and stoichiometry

Energy Technology Data Exchange (ETDEWEB)

Spille, H; Rauchschwalbe, U; Steglich, F [Technische Hochschule Darmstadt (Germany, F.R.). Inst. fuer Festkoerperphysik

1938-01-01

The authors have determined the transition temperatures of the alloy systems (Ce,M)Cu/sub 2/Si/sub 2/ with M = La, Y, Sc, Ce(Cu,T)/sub 2/Si/sub 2/ with T = Ag, Au, Mn, Ru, Rh, Pd and CeCu/sub 2/(Si,Ge)/sub 2/ as well as of CeCu/sub 2/Si/sub 2/ samples with varying stoichiometry. In each case, alloying is found to depress Tsub(c), the critical concentrations necessary to destroy superconductivity ranging between < 1 at.% and 10 at.%. Off-stoichiometry samples with a Cu- or Ce-deficiency of a few at.% are not superconducting, while samples prepared with a comparable excess of Cu or Ce show sharp transitions at Tsub(c) >approx. 600 mK. It is inferred that stoichiometric CeCu/sub 2/Si/sub 2/ contains substantial concentrations of Cu- and Ce-vacancies, which hinder superconductivity. First results on CeCu/sub 2/Si/sub 2/ single crystals, which exhibit bulk superconductivity, are also reported.

3D confocal imaging in CUBIC-cleared mouse heart

Energy Technology Data Exchange (ETDEWEB)

Nehrhoff, I.; Bocancea, D.; Vaquero, J.; Vaquero, J.J.; Lorrio, M.T.; Ripoll, J.; Desco, M.; Gomez-Gaviro, M.V.

2016-07-01

Acquiring high resolution 3D images of the heart enables the ability to study heart diseases more in detail. Here, the CUBIC (clear, unobstructed brain imaging cocktails and computational analysis) clearing protocol was adapted for thick mouse heart sections to increase the penetration depth of the confocal microscope lasers into the tissue. The adapted CUBIC clearing of the heart lets the antibody penetrate deeper into the tissue by a factor of five. The here shown protocol enables deep 3D highresolution image acquisition in the heart. This allows a much more accurate assessment of the cellular and structural changes that underlie heart diseases. (Author)

3D confocal imaging in CUBIC-cleared mouse heart

International Nuclear Information System (INIS)

Nehrhoff, I.; Bocancea, D.; Vaquero, J.; Vaquero, J.J.; Lorrio, M.T.; Ripoll, J.; Desco, M.; Gomez-Gaviro, M.V.

2016-01-01

Acquiring high resolution 3D images of the heart enables the ability to study heart diseases more in detail. Here, the CUBIC (clear, unobstructed brain imaging cocktails and computational analysis) clearing protocol was adapted for thick mouse heart sections to increase the penetration depth of the confocal microscope lasers into the tissue. The adapted CUBIC clearing of the heart lets the antibody penetrate deeper into the tissue by a factor of five. The here shown protocol enables deep 3D highresolution image acquisition in the heart. This allows a much more accurate assessment of the cellular and structural changes that underlie heart diseases. (Author)

Piezoelectric properties enhanced of Sr0.6(BiNa)0.2Bi2Nb2O9 ceramic by (LiCe) modification with charge neutrality

International Nuclear Information System (INIS)

Fang, Pinyang; Xi, Zengzhe; Long, Wei; Li, Xiaojuan; Li, Jin

2013-01-01

Graphical abstract: The oxygen vacancies were confirmed by the left figure. The role of oxygen vacancy on piezoelectric activities was obtained by comparing to the varieties of oxygen vacancy concentration and piezoelectric coefficient with (LiCe) modification. -- Highlights: • The Sr 0.6 (BiNa) 0.2 Bi 2 Nb 2 O 9 ceramic by (LiCe) modification with the charge neutrality was synthesized by the solid state reaction method. • The Curie temperature and piezoelectric coefficient were found to be T c ∼590 °C and d 33 ∼32 pC/N, respectively. • The mechanism of piezoelectric activities improved by (LiCe) modification was discussed. -- Abstract: Aurivillius-type ceramics, Sr 0.6−x (LiCe) x/2.5 (BiNa) 0.2 Bi 2 Nb 2 O 9 (SLCBNBNO) with the charge neutrality, were synthesized by using conventional solid-state processing. Phase analysis was performed by X-ray diffraction analyses (XRD) and Raman spectroscopy. Microstructural morphology was assessed by the scanning electron microscopy (SEM). Structural, dielectric, piezoelectric, ferroelectric, and electromechanical properties of the SLCBNBNO ceramics were investigated. Piezoelectric properties were significantly enhanced compared to Sr 0.6 (BiNa) 0.2 Bi 2 Nb 2 O 9 (SBNBN) ceramic and the maximum of piezoelectric coefficient d 33 of the SBNBN-LC6 ceramic was 32 pC/N with higher Curie temperature (T c ∼590 °C). In addition, mechanisms for the piezoelectric properties enhanced of the SBNBN-based ceramics were discussed

Mechanochemical synthesis of ultrafine Ce2S3 powder

International Nuclear Information System (INIS)

Tsuzuki, T.; McCormick, P.G.

1998-01-01

Full text: Rare earth sulphides have been receiving an increasing attraction for various applications including infrared window materials and magneto-optical devices. In particular, Ce 2 S 3 has been under intensive study for use as a red pigment to replace toxic cadmium sulfoselenide. The conventional method for synthesising Ce 2 S 3 is the sulphidization of the element or sesquioxide with hydrogen sulphide gas. However, the method usually requires a high-temperature process (>1000 deg C), and hence coarse particles larger than the optimal size of ∼ 2 S 3 powder by mechanochemical processing using X-ray diffraction spectroscopy, BET surface area analysis and transmission electron microscopy. Mechanical milling of the mixture of a cerium salt and an alkali/alkali-earth sulphide powders led to a solid state displacement reaction in a steady-state manner, forming Ce 2 S 3 nanoparticles in a salt by-product matrix. After a simple washing process to remove the salt by-product, ultrafine Ce 2 S 3 particles with sizes of 20 - 200 nm having an orthorhombic structure were obtained. Using a diluent and mechanically alloyed CaS nanoparticles in the starting powder, particles of only a cubic γ-Ce 2 S 3 phase with sizes of 10 - 80 nm were formed

A Facile Method for Loading CeO2 Nanoparticles on Anodic TiO2 Nanotube Arrays.

Science.gov (United States)

Liao, Yulong; Yuan, Botao; Zhang, Dainan; Wang, Xiaoyi; Li, Yuanxun; Wen, Qiye; Zhang, Huaiwu; Zhong, Zhiyong

2018-04-03

In this paper, a facile method was proposed to load CeO 2 nanoparticles (NPs) on anodic TiO 2 nanotube (NT) arrays, which leads to a formation of CeO 2 /TiO 2 heterojunctions. Highly ordered anatase phase TiO 2 NT arrays were fabricated by using anodic oxidation method, then these individual TiO 2 NTs were used as tiny "nano-containers" to load a small amount of Ce(NO 3 ) 3 solutions. The loaded anodic TiO 2 NTs were baked and heated to a high temperature of 450 °C, under which the Ce(NO 3 ) 3 would be thermally decomposed inside those nano-containers. After the thermal decomposition of Ce(NO 3 ) 3 , cubic crystal CeO 2 NPs were obtained and successfully loaded into the anodic TiO 2 NT arrays. The prepared CeO 2 /TiO 2 heterojunction structures were characterized by a variety of analytical technologies, including XRD, SEM, and Raman spectra. This study provides a facile approach to prepare CeO 2 /TiO 2 films, which could be very useful for environmental and energy-related areas.

Optical characterization of hydrogen-free CeO2 doped DLC films deposited by unbalanced magnetron sputtering

International Nuclear Information System (INIS)

Zhang Zhenyu; Zhou Hongxiu; Guo Dongming; Gao Hang; Kang Renke

2008-01-01

A novel kind of hydrogen-free CeO 2 doped diamond-like carbon (DLC) films with thickness of 180-200 nm were deposited on silicon by unbalanced magnetron sputtering. Reduced reflectance and increased lifetime are expected with respect to pure DLC films, making these coatings good candidates as optical protective coatings for IR windows and solar cells. X-ray photoelectron spectroscopy confirms that CeO 2 is formed within the DLC films. Auger electron spectroscopy exhibits that the C, O, and Ce elements distribute uniformly across the film thickness, and C element diffuses into the Si substrate at the interface between the substrate and film. AFM shows that nanoparticles with diameter of around 50 nm are formed on the surface of deposited films, whose surface roughness is in the range of 1.3-2.3 nm. Raman spectra show the CeO 2 doped DLC films are amorphous DLC films, and both the G frequency and relative intensity ratio I D /I G are higher than those of pure DLC films. The photoluminescence of CeO 2 doped DLC films is obviously more intense than that of a pure DLC film, which indicates a promising potential as optical protective films for solar cells and IR window

Site Occupancies, Luminescence, and Thermometric Properties of LiY9(SiO4)6O2:Ce3+ Phosphors.

Science.gov (United States)

Zhou, Weijie; Pan, Fengjuan; Zhou, Lei; Hou, Dejian; Huang, Yan; Tao, Ye; Liang, Hongbin

2016-10-04

In this work, we report the tunable emission properties of Ce 3+ in an apatite-type LiY 9 (SiO 4 ) 6 O 2 compound via adjusting the doping concentration or temperature. The occupancies of Ce 3+ ions at two different sites (Wyckoff 6h and 4f sites) in LiY 9 (SiO 4 ) 6 O 2 have been determined by Rietveld refinements. Two kinds of Ce 3+ f-d transitions have been studied in detail and then assigned to certain sites. The effects of temperature and doping concentration on Ce 3+ luminescence properties have been systematically investigated. It is found that the Ce 3+ ions prefer occupying Wyckoff 6h sites and the energy transfer between Ce 3+ at two sites becomes more efficient with an increase in doping concentration. In addition, the charge-transfer vibronic exciton (CTVE) induced by the existence of free oxygen ion plays an important role in the thermal quenching of Ce 3+ at 6h sites. Because of the tunable emissions from cyan to blue with increasing temperature, the phosphors LiY 9 (SiO 4 ) 6 O 2 :Ce 3+ are endowed with possible thermometric applications.

Intermediate Ce{sup 3+} defect level induced photoluminescence and third-order nonlinear optical effects in TiO{sub 2}-CeO{sub 2} nanocomposites

Energy Technology Data Exchange (ETDEWEB)

Divya, S.; Nampoori, V.P.N.; Radhakrishnan, P.; Mujeeb, A. [Cochin University of Science and Technology, International School of Photonics, Cochin, Kerala (India)

2014-02-15

We report on the linear and nonlinear optical studies of TiO{sub 2}-CeO{sub 2} nanocomposites. It was found that the band gap of the nanocomposite can be tuned by varying Ce/Ti content. Nonlinear absorption characteristics of these samples were studied by employing open aperture Z-scan technique using an Nd:YAG laser (532 nm, 7 ns, 10 Hz). It has been observed that as the CeO{sub 2} amount increases, band gap of the nanocomposites decreases and the reason proposed for the change in band gap is the smudging of localised states of Ce{sup 3+} into the forbidden energy gap, thus acting as the intermediate state. Fluorescence studies confirmed the above argument. Nonlinear investigation revealed that with increase in the CeO{sub 2} amount, the two-photon absorption coefficient increased due to the modification of TiO{sub 2} dipole symmetry. Suitable candidature of the nanocomposites for the fabrication of nonlinear optical devices was proved by determining the optical limiting threshold. (orig.)

Fabrication, structure, and enhanced photocatalytic properties of hierarchical CeO2 nanostructures/TiO2 nanofibers heterostructures

International Nuclear Information System (INIS)

Cao, Tieping; Li, Yuejun; Wang, Changhua; Wei, Liming; Shao, Changlu; Liu, Yichun

2010-01-01

Combining the versatility of electrospinning technique and hydrothermal growth of nanostructures enabled the fabrication of hierarchical CeO 2 /TiO 2 nanofibrous mat. The as-prepared hierarchical heterostructure consisted of CeO 2 nanostructures growing on the primary TiO 2 nanofibers. Interestingly, not only were secondary CeO 2 nanostructures successfully grown on TiO 2 nanofibers substrates, but also the CeO 2 nanostructures were uniformly distributed without aggregation on TiO 2 nanofibers. By selecting different alkaline source, CeO 2 /TiO 2 heterostructures with CeO 2 nanowalls or nanoparticles were facilely fabricated. The photocatalytic studies suggested that the CeO 2 /TiO 2 heterostructures showed enhanced photocatalytic efficiency of photodegradation of dye pollutants compared with bare TiO 2 nanofibers under UV light irradiation.

Scintillation response of BaF2 and YAlO3:Ce (YAP:Ce) to energetic ions

International Nuclear Information System (INIS)

Slunga, E.; Cederwall, B.; Ideguchi, E.; Kerek, A.; Klamra, W.; Marel, J. van der; Novak, D.; Norlin, L.-O.

2001-01-01

The scintillation response of BaF 2 and YAP:Ce to protons, α particles, 16 O and 28 Si ions in the 5-30 MeV range has been investigated. The ratio between the fast and slow parts of the scintillator signal for BaF 2 has been used to separate protons, α particles and heavier ions, and the dependence of this ratio on the particle energy has been studied. The time constants and intensities of the two components of the YAP:Ce signal were measured, as were the time constant and intensity of the weak component of the slow part of the BaF 2 signal. Furthermore, the dependence of the light yield on the particle energy has been investigated for both BaF 2 and YAP:Ce

Photoluminescence and scintillation properties of Ce-doped Sr2(Gd1-xLux)8(SiO4)6O2 (x = 0.1, 0.2, 0.4, 0.5, 0.6) crystals

Science.gov (United States)

Igashira, Takuya; Kawano, Naoki; Okada, Go; Kawaguchi, Noriaki; Yanagida, Takayuki

2018-05-01

Apatite crystals with chemical compositions of 0.5% Ce-doped Sr2(Gd1-xLux)8(SiO4)6O2 (x = 0.1, 0.2, 0.4, 0.5, 0.6) were synthesized by the Floating Zone method, and then we evaluated their photoluminescence (PL) and scintillation properties. All the Ce-doped samples exhibited PL and scintillation with an intense broad emission in 400-550 nm in which the origin was attributed to the 5d-4f transition of Ce3+, and the emission peak became broader with increasing the concentration of Lu3+. Both PL and scintillation decay time profiles were best-approximated by a sum of two exponential decay functions, and the origin of slower component was attributed to the 5d-4f transition of Ce3+. In the X-ray induced afterglow measurements, the Ce-doped Sr2(Gd0.4Lu0.6)8(SiO4)6O2 sample exhibited the lowest afterglow level. Furthermore, the Ce-doped Sr2(Gd0.5Lu0.5)8(SiO4)6O2 and Sr2(Gd0.4Lu0.6)8(SiO4)6O2 samples showed a clear full energy deposited peak under 5.5 MeV 241Am α-ray irradiation, and the estimated absolute scintillation light yields were around 290 and 1300 ph/5.5 MeV-α, respectively.

Laser clad Ni-base alloy added nano- and micron-size CeO 2 composites

Science.gov (United States)

Zhang, Shi Hong; Li, Ming Xi; Cho, Tong Yul; Yoon, Jae Hong; Lee, Chan Gyu; He, Yi Zhu

2008-07-01

Micron-size Ni-base alloy (NBA) powders are mixed with both 1.5 wt% (%) micron-CeO 2 (m-CeO 2) and also 1.0-3.0% nano-CeO 2 (n-CeO 2) powders. These mixtures are coated on low carbon steel (Q235) by 2.0 kW CO 2 laser cladding. The effects on microstructures, microhardness and wear resistance of the coating by the addition of m- and n-CeO 2 powders to NBA (m- and n-CeO 2/NBA) have been investigated. Addition to the primary phases of γ-Ni, Cr 23C 6 and Ni 3B of NBA coating, CeNi 3 shows up both in m- and n-CeO 2/NBA coatings and CeNi 5 appears only in n-CeO 2/NBA coating. Directional dendrite and coarse equiaxed dendrite are grown in m-CeO 2/NBA coating from interface to central zone, whereas multi-oriented dendrite and fine equiaxed dendrite growth by addition of n-CeO 2. The microhardness and wear resistance of coatings are greatly improved by CeO 2 powder addition, and compared to the addition of 1.0% and 3.0%, 1.5% n-CeO 2/NBA is the best. Hardness and wear resistance of the coating improves with decreasing CeO 2 size from micron to nano.

Preparation and characterization of Ce-doped HfO{sub 2} nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Gálvez-Barboza, S. [Centro de Investigación en Química Aplicada, Departamento de Materiales Avanzados, Blvd. Enrique Reyna Hermosillo #140, C.P. 25294 Saltillo, Coahuila (Mexico); Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Av. Industria Metalúrgica # 1062 Parque Industrial, C.P. 25900 Ramos Arizpe, Coahuila (Mexico); González, L.A. [Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Av. Industria Metalúrgica # 1062 Parque Industrial, C.P. 25900 Ramos Arizpe, Coahuila (Mexico); Puente-Urbina, B.A.; Saucedo-Salazar, E.M. [Centro de Investigación en Química Aplicada, Departamento de Materiales Avanzados, Blvd. Enrique Reyna Hermosillo #140, C.P. 25294 Saltillo, Coahuila (Mexico); García-Cerda, L.A., E-mail: luis.garcia@ciqa.edu.mx [Centro de Investigación en Química Aplicada, Departamento de Materiales Avanzados, Blvd. Enrique Reyna Hermosillo #140, C.P. 25294 Saltillo, Coahuila (Mexico)

2015-09-15

Highlights: • Ce-doped HfO{sub 2} nanoparticles were prepared by a modified solgel method. • Ce-doped HfO{sub 2} nanoparticles have a semispherical shape with sizes between 6 and 11.5 nm. • The samples doped with 10% in weight of Ce directly crystallized in a cubic structure. • A quick, straightforward and effective route for the preparation of Ce-doped nanoparticles. - Abstract: A modified solgel method to synthesize Ce-doped HfO{sub 2} nanoparticles was carried out using a precursor material prepared with cerium nitrate, hafnium chloride, citric acid and ethylene glycol. The obtained precursor material was calcined at 500 and 700 °C for 2 h in air. The influence of the concentration of Ce and the calcination temperature was studied to observe the structural and morphological changes of the obtained materials. For the characterization, X-ray diffraction (XRD), transmission electron microscopy (TEM) and Raman scattering (RS) were employed. The XRD patterns shown that the Ce-doped HfO{sub 2} undergoes a structural transformation from monoclinic to cubic phase, which is significantly dependent on the Ce content and calcination temperature. TEM images have also confirmed the existence of semispherical nanoparticles with sizes between 6 and 11.5 nm.

Simultaneous enantioselective separation of polychlorinated biphenyls and their methyl sulfone metabolites by heart-cut MDGC: determination of enantiomeric fractions in fish oils and cow liver samples.

Science.gov (United States)

Pérez-Fernández, Virginia; Castro-Puyana, María; González, María José; Marina, María Luisa; García, María Ángeles; Gómara, Belén

2012-07-01

The potential of three capillary columns based on β-cyclodextrin (i.e., Chirasil-Dex, BGB-172, and BGB-176SE) has been studied for the simultaneous enantiomeric separation of polychlorinated biphenyls (PCBs) and methylsulfonyl metabolites of PCBs (MeSO(2)-PCBs) employing a heart-cut multidimensional gas chromatographic system (heart-cut MDGC). Among the columns studied, the BGB-176SE capillary column provided the best results, allowing the simultaneous enantioselective resolution of six MeSO(2)-PCBs and six chiral PCBs; the Chirasil-Dex column did not resolve any of the studied MeSO(2)-PCBs; and a poor resolution was obtained for three MeSO(2)-PCBs when the BGB-172 column was employed. The developed method was successfully applied to two fish oil and one cow liver samples commercially available, which showed different enantioselective pattern. PCBs 91 and 176 presented a clear enrichment of the second eluted atropisomer in codfish oil, whereas in fish oil sample, slight enrichment of the first eluted atropisomer of CB45 and the second eluted atropisomer of CB136 were observed. © 2012 Wiley Periodicals, Inc.

Ce-doped nanoparticles of TiO2: Rutile-to-brookite phase transition and evolution of Ce local-structure studied with XRD and XANES

International Nuclear Information System (INIS)

Kityakarn, Sutasinee; Worayingyong, Attera; Suramitr, Anwaraporn; Smith, M.F.

2013-01-01

The crystal and electronic structural changes undergone by TiO 2 nanoparticles when Ce is introduced were studied using X-ray diffraction (XRD) and X-ray absorption near-edge spectroscopy (XANES). A small amount of Ce (less than 1% molar concentration) resulted in i/a significant reduction of the average size of the TiO 2 nanoparticles and ii/a phase transition in which brookite replaced rutile as the minority phase component (anatase was the majority phase component at all Ce concentrations studied up to 10% molar concentration). The Ce L3 edge XANES revealed changes in the local environment of Ce impurities. As Ce concentration was increased the fraction of Ce that have formal valence of +3 decreased and, for the remaining Ce with valence +4, the 4f orbitals became less-strongly hybridized with the p-orbitals of oxygen neighbors. The results have implications for photocatalytic and gas sensing properties of Ce-doped TiO 2 . - Highlights: ► Ce-doping: TiO 2 nanoparticles shrink and minority phase changes rutile-> brookite. ► XANES reveals phase change for arbitrarily small particles (while XRD fails). ► As Ce added: fraction of Ce +3 dopants falls, hybridization of Ce +4 with O weakens

Attapulgite-CeO{sub 2}/MoS{sub 2} ternary nanocomposite for photocatalytic oxidative desulfurization

Energy Technology Data Exchange (ETDEWEB)

Li, Xiazhang, E-mail: lixiazhang509@163.com [Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou 213164 (China); Jiangsu Key Laboratory for Environment Functional Materials, Suzhou University of Science and Technology, Suzhou 215009 (China); W.M.Keck Center for Advanced Microscopy and Microanalysis, University of Delaware, Newark, DE 19716 (United States); Zhang, Zuosong [School of Materials Science and Engineering, Changzhou University, Changzhou 213164 (China); Yao, Chao [Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou 213164 (China); Lu, Xiaowang [School of Materials Science and Engineering, Changzhou University, Changzhou 213164 (China); Zhao, Xiaobing [School of Materials Science and Engineering, Changzhou University, Changzhou 213164 (China); Jiangsu Key Laboratory for Environment Functional Materials, Suzhou University of Science and Technology, Suzhou 215009 (China); Ni, Chaoying [W.M.Keck Center for Advanced Microscopy and Microanalysis, University of Delaware, Newark, DE 19716 (United States)

2016-02-28

Graphical abstract: - Highlights: • Novel attapulgite(ATP)-CeO{sub 2}/MoS{sub 2} ternary nanocomposites were fabricated. • ATP possessed outstanding adsorption property and enhanced the stability of the network structure. • CeO{sub 2}/MoS{sub 2} couples facilitated the separation of photo-induced electrons and holes. • Mass ratio of CeO{sub 2}/MoS{sub 2} influenced the photocatalytic oxidation desulfurization. - Abstract: Novel attapulgite(ATP)-CeO{sub 2}/MoS{sub 2} ternary nanocomposites were synthesized by microwave assisted assembly method. The structures of the nanocomposites were characterized by XRD, FT-IR, UV–vis, XPS and in situ TEM. The photocatalytic activities of ATP-CeO{sub 2}/MoS{sub 2} composites were investigated by degradating dibenzothiophene (DBT) in gasoline under visible light irradiation. The effect of the mass ratio of CeO{sub 2} to MoS{sub 2} on photocatalytic activity was investigated. The results indicate that the three-dimensional network structure is firmly constructed by ATP skeleton, CeO{sub 2} particles and MoS{sub 2} nanosheet which effectively increase the surface area of the composites and promote the separation of electrons and holes by resulting electronic transmission channels of multi-channel in space. The degradation rate of DBT can reach 95% under 3 h irradiation when the mass ratio of CeO{sub 2}/MoS{sub 2} is 4/10. A plausible mechanism for the photocatalytic oxidative desulfurization of this nanocomposite is put forward.

Scintillation and optical stimulated luminescence of Ce-doped CaF2

International Nuclear Information System (INIS)

Yanagida, Takayuki; Fujimoto, Yutaka; Watanabe, Kenichi; Fukuda, Kentaro; Kawaguchi, Noriaki; Miyamoto, Yuka; Nanto, Hidehito

2014-01-01

Scintillation and optical stimulated luminescence of Ce 0.1–20% doped CaF 2 crystals prepared by Tokuyama Corp. were investigated. In X-ray induced scintillation spectra, luminescence due to Ce 3+ 5d–4f transition appeared around 320 nm with typically 40 ns decay time. By 241 Am 5.5 MeV α-ray irradiation, 0.1% doped one showed the highest scintillation light yield and the light yield monotonically decreased with Ce concentrations. Optically stimulated luminescence after X-ray irradiation was observed around 320 nm under 550 or 830 nm stimulation in all samples. As a result, intensities of optically stimulated luminescence were proportional to Ce concentrations. Consequently, scintillation and optically stimulated luminescence resulted to have a complementary relation in Ce-doped CaF 2 system. - Highlights: • Optical, scintillation, and OSL properties of Ce 0.1–20% doped CaF 2 were studied. • Scintillation light yield exhibited inverse proportionality to Ce concentrations. • OSL intensities showed proportionality to Ce concentrations. • Complementary relation of scintillation and OSL was experimentally confirmed

Optical properties of CeO 2 thin films

Indian Academy of Sciences (India)

Cerium oxide (CeO2) thin films have been prepared by electron beam evaporation technique onto glass substrate at a pressure of about 6 × 10-6 Torr. The thickness of CeO2 films ranges from 140–180 nm. The optical properties of cerium oxide films are studied in the wavelength range of 200–850 nm. The film is highly ...

Fermi-surface topology of the heavy-fermion system Ce2PtIn8

Science.gov (United States)

Klotz, J.; Götze, K.; Green, E. L.; Demuer, A.; Shishido, H.; Ishida, T.; Harima, H.; Wosnitza, J.; Sheikin, I.

2018-04-01

Ce2PtIn8 is a recently discovered heavy-fermion system structurally related to the well-studied superconductor CeCoIn5. Here we report on low-temperature de Haas-van Alphen-effect measurements in high magnetic fields in Ce2PtIn8 and Pr2PtIn8 . In addition, we performed band-structure calculations for localized and itinerant Ce-4 f electrons in Ce2PtIn8 . Comparison with the experimental data of Ce2PtIn8 and of the 4 f -localized Pr2PtIn8 suggests the itinerant character of the Ce-4 f electrons. This conclusion is further supported by the observation of effective masses in Ce2PtIn8 , which are strongly enhanced with up to 26 bare electron masses.

Cerium(IV) Tellurite Halides [Ce ₂ Te ₇ O ₁₇ ]X ₂ (X = Cl ^– or Br ^– ): The First Cerium-Containing Cationic Frameworks

Energy Technology Data Exchange (ETDEWEB)

Lin, Jian [Department of Civil; amp, Environmental Engineering & amp, Earth Sciences and Department of Chemistry and Biochemistry, University of Notre Dame, 156 Fitzpatrick Hall, Notre; Diwu, Juan [Department of Civil; amp, Environmental Engineering & amp, Earth Sciences and Department of Chemistry and Biochemistry, University of Notre Dame, 156 Fitzpatrick Hall, Notre; Cross, Justin N. [Department of Civil; amp, Environmental Engineering & amp, Earth Sciences and Department of Chemistry and Biochemistry, University of Notre Dame, 156 Fitzpatrick Hall, Notre; Villa, Eric M. [Department of Civil; amp, Environmental Engineering & amp, Earth Sciences and Department of Chemistry and Biochemistry, University of Notre Dame, 156 Fitzpatrick Hall, Notre; Albrecht-Schmitt, Thomas E. [Department of Chemistry

2012-09-13

Two isotypic cerium tellurite halides with the formulas [Ce2Te7O17]Cl2 and [Ce2Te7O17]Br2 have been synthesized hydrothermally via the reactions of CeCl3 and CeBr3 with TeO2. The structures of these compounds feature a cationic inorganic framework. The CeIV dimers are bound by a novel 3D Te7O176– building unit, forming an unusual hexagonal-bipyramidal environment around CeIV.

Effects of Surfactants on the Performance of CeO2 Humidity Sensor

Directory of Open Access Journals (Sweden)

Chunjie Wang

2014-01-01

Full Text Available Nanosized CeO2 powders were synthesized via hydrothermal method with different types of surfactants (polyethylene glycol (PEG, cetyltrimethylammonium bromide (CTAB, and sodium dodecylbenzenesulfonate (SDBS. X-ray diffraction, Raman spectroscopy, and transmission electron microscopy were utilized to characterize the phase structures and morphologies of the products. The sample with CTAB as surfactant (CeO2-C has the largest specific surface area and the smallest particle size among these three samples. The humidity sensor fabricated by CeO2-C shows higher performance than those used CeO2-P and CeO2-S. The impedance of the CeO2-C sensor decreases by about five orders of magnitude with relative humidity (RH changing from 15.7 to 95%. The response and recovery time are 7 and 7 s, respectively. These results indicate that the performance of CeO2 humidity sensors can be improved effectively by the addition of cationic surfactant.

Highly porous CeO2 nanostructures prepared via combustion synthesis for supercapacitor applications

DEFF Research Database (Denmark)

Kadirvelayutham, Prasanna; Santhoshkumar, P.; Jo, Yong Nam

2017-01-01

We report highly porous CeO2 nanostructures (CeO2 NSs) suitable for supercapacitor applications, synthesized using a fast and cost effective combustion approach. Due to its prominent valence states of Ce3+/Ce4+, CeO2 has emerged as a promising pseudocapacitive material. The drawback of using CeO2...... as a supercapacitor electrode is its poor electrical conductivity. We overcame this drawback of CeO2 by creating oxygen vacancies on its surface, which act to enhance its electrical conductivity. The physical interpretation of the as-synthesized CeO2 NSs shows that they have dense active sites and diffusion pathways...... that enhance the performance of the electrode in a supercapacitor. Electrodes prepared using the synthesized CeO2 NSs exhibited the initial specific capacitance of 134.6 F g-1 and superior cycling stability of 92.5% after 1000 cycles at a constant current density of 1 A g-1, indicating their potential...

Characterization of LaBr{sub 3}:Ce and CeBr{sub 3} calorimeter modules for 3D imaging in gamma-ray astronomy

Energy Technology Data Exchange (ETDEWEB)

Gostojić, A., E-mail: aleksandar.gostojic@csnsm.in2p3.fr [CSNSM, Univ. Paris-Sud, CNRS/IN2P3, Université Paris-Saclay, 91405 Orsay (France); Tatischeff, V.; Kiener, J.; Hamadache, C.; Peyré, J.; Karkour, N.; Linget, D.; Gibelin, L.; Lafay, X.; Grave, X.; Dosme, N.; Legay, E. [CSNSM, Univ. Paris-Sud, CNRS/IN2P3, Université Paris-Saclay, 91405 Orsay (France); Blin, S. [OMEGA, École Polytechnique, CNRS/IN2P3, Route de Saclay, 91128 Palaiseau (France); Barrillon, P. [LAL, Univ. Paris-Sud, CNRS/IN2P3, Université Paris-Saclay, 91898 Orsay (France)

2016-10-01

For the purpose of future space instrumentation for γ-ray astronomy, we developed a small prototype of a Compton telescope and studied novel detector modules aimed for Compton imaging. We assembled and tested 2 modules, one with a cerium-doped lanthanum(III) bromide (LaBr{sub 3}:Ce) crystal and the other with cerium(III) bromide (CeBr{sub 3}). Both crystals measure 5×5 cm{sup 2} in area and are 1 cm thick. They are coupled to and read out by 64-channel multi-anode PMTs. Our goals are to obtain the best possible energy resolution and position resolution in 3D on the first impact of an incident γ-ray within the detector. Both information are vital for successful reconstruction of a Compton image with the telescope prototype. We developed a test bench to experimentally study both modules and have utilized a customized readout electronics and data acquisition system. Furthermore, we have written a detailed Geant4 simulation of the experiment, and utilize simulated data to train an Artificial Neural Network (ANN) algorithm to create a simplified 3D impact position reconstruction method. We give experimental test results obtained by both modules and present detailed parametrization and results from the Geant4 simulation and from the ANN. We compare and discuss the performance of the modules and conclude by giving a brief overview of the future prospects for using such modules in γ-ray astronomy.

Heteroaggregation, transformation and fate of CeO2 nanoparticles in wastewater treatment

International Nuclear Information System (INIS)

Barton, Lauren E.; Auffan, Melanie; Olivi, Luca; Bottero, Jean-Yves; Wiesner, Mark R.

2015-01-01

Wastewater Treatment Plants (WWTPs) are a key pathway by which nanoparticles (NPs) enter the environment following release from NP-enabled products. This work considers the fate and exposure of CeO 2 NPs in WWTPs in a two-step process of heteroaggregation with bacteria followed by the subsequent reduction of Ce(IV) to Ce(III). Measurements of NP association with solids in sludge were combined with experimental estimates of reduction rate constants for CeO 2 NPs in Monte Carlo simulations to predict the concentrations and speciation of Ce in WWTP effluents and biosolids. Experiments indicated preferential accumulation of CeO 2 NPs in biosolids where reductive transformation would occur. Surface functionalization was observed to impact both the distribution coefficient and the rates of transformation. The relative affinity of CeO 2 NPs for bacterial suspensions in sludge appears to explain differences in the observed rates of Ce reduction for the two types of CeO 2 NPs studied. - Highlights: • We combine experimental and computational methods to track CeO 2 NPs through WWTPs. • We investigate the importance of environmental transformations on NP exposure. • We estimate the concentrations of CeO 2 NPs and reductive transformation byproducts. - CeO 2 nanoparticles that are released to the waste stream will preferentially associate with the solid phase (∼96%), where they will undergo significant transformation (∼50%)

Catalytic Oxidation of Propene over Pd Catalysts Supported on CeO2, TiO2, Al2O3 and M/Al2O3 Oxides (M = Ce, Ti, Fe, Mn

Directory of Open Access Journals (Sweden)

Sonia Gil

2015-04-01

Full Text Available In the following work, the catalytic behavior of Pd catalysts prepared using different oxides as support (Al2O3, CeO2 and TiO2 in the catalytic combustion of propene, in low concentration in excess of oxygen, to mimic the conditions of catalytic decomposition of a volatile organic compound of hydrocarbon-type is reported. In addition, the influence of different promoters (Ce, Ti, Fe and Mn when added to a Pd/Al2O3 catalyst was analyzed. Catalysts were prepared by the impregnation method and were characterized by ICP-OES, N2 adsorption, temperature-programmed reduction, temperature-programmed oxidation, X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy. Catalyst prepared using CeO2 as the support was less easily reducible, due to the stabilization effect of CeO2 over the palladium oxides. Small PdO particles and, therefore, high Pd dispersion were observed for all of the catalysts, as confirmed by XRD and TEM. The addition of Ce to the Pd/Al2O3 catalysts increased the metal-support interaction and the formation of highly-dispersed Pd species. The addition of Ce and Fe improved the catalytic behavior of the Pd/Al2O3 catalyst; however, the addition of Mn and Ti decreased the catalytic activity in the propene oxidation. Pd/TiO2 showed the highest catalytic activity, probably due to the high capacity of this catalyst to reoxidize Pd into PdO, as has been found in the temperature-programmed oxidation (TPO experiments.

Room-temperature synthesis and characterization of porous CeO2 thin films

International Nuclear Information System (INIS)

Chu, Dewei; Masuda, Yoshitake; Ohji, Tatsuki; Kato, Kazumi

2012-01-01

CeO 2 thin films with hexagonal-shaped pores were successfully prepared by a facile electrodeposition at room temperature combined with an etching process. By using electrodeposited ZnO nanorods as a soft template, the morphology, and microstructure of the CeO 2 could be controlled. TEM observation indicated that as-prepared CeO 2 film is composed of nanocrystals with average size of several nanometers, while XPS analysis showed the coexistence of Ce 3+ and Ce 4+ in the film. The photoluminescence properties of CeO 2 films were measured, which showed much higher sensitivity compared to bare substrate. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

μCT of ex-vivo stained mouse hearts and embryos enables a precise match between 3D virtual histology, classical histology and immunochemistry

Science.gov (United States)

Larsson, Emanuel; Martin, Sabine; Lazzarini, Marcio; Tromba, Giuliana; Missbach-Guentner, Jeannine; Pinkert-Leetsch, Diana; Katschinski, Dörthe M.; Alves, Frauke

2017-01-01

The small size of the adult and developing mouse heart poses a great challenge for imaging in preclinical research. The aim of the study was to establish a phosphotungstic acid (PTA) ex-vivo staining approach that efficiently enhances the x-ray attenuation of soft-tissue to allow high resolution 3D visualization of mouse hearts by synchrotron radiation based μCT (SRμCT) and classical μCT. We demonstrate that SRμCT of PTA stained mouse hearts ex-vivo allows imaging of the cardiac atrium, ventricles, myocardium especially its fibre structure and vessel walls in great detail and furthermore enables the depiction of growth and anatomical changes during distinct developmental stages of hearts in mouse embryos. Our x-ray based virtual histology approach is not limited to SRμCT as it does not require monochromatic and/or coherent x-ray sources and even more importantly can be combined with conventional histological procedures. Furthermore, it permits volumetric measurements as we show for the assessment of the plaque volumes in the aortic valve region of mice from an ApoE-/- mouse model. Subsequent, Masson-Goldner trichrome staining of paraffin sections of PTA stained samples revealed intact collagen and muscle fibres and positive staining of CD31 on endothelial cells by immunohistochemistry illustrates that our approach does not prevent immunochemistry analysis. The feasibility to scan hearts already embedded in paraffin ensured a 100% correlation between virtual cut sections of the CT data sets and histological heart sections of the same sample and may allow in future guiding the cutting process to specific regions of interest. In summary, since our CT based virtual histology approach is a powerful tool for the 3D depiction of morphological alterations in hearts and embryos in high resolution and can be combined with classical histological analysis it may be used in preclinical research to unravel structural alterations of various heart diseases. PMID:28178293

XAFS Analysis of Local Structure around Ce in Ca3Sc2Si3O12:Ce Phosphor for White LEDs

International Nuclear Information System (INIS)

Akai, Toshio; Shigeiwa, Motoyuki; Okamoto, Kaoru; Shimomura, Yasuo; Kijima, Naoto; Honma, Tetsuo

2007-01-01

We have studied the local structure around Ce atom in Ca3Sc2Si3O12 host crystal, which has been developed as a new green phosphor for white light emitting diodes (LEDs). As the local structure and chemical environment of the dopant atom are very important to improve the performance of the phosphor, we have used XAFS to get chemical and structural information around the Ce dopant. The XANES spectrum of the Ce LIII-edge reveals that the Ce atom is trivalent in Ca3Sc2Si3O12. There are two kinds of possible Ce substitution sites, Ca site and Sc site, in garnet type Ca3Sc2Si3O12 crystal structure. The Ce atom is found to be at the Ca site in the host crystal by the comparison of the Fourier transform of Ce K-edge EXAFS spectrum with those of Ca and Sc K-edge EXAFS spectra. The theoretical analysis with FEFF also clarified the Ce substitution at the Ca site. Furthermore, the result of the analysis indicates the structural disorder around Ca and Si atoms at 3.75 A. It is possible that there are some defects around the Ca and Si atoms at 3.75 A to compensate the excess positive charge by introduced Ce3+ at the Ca2+ site

Development of real-time monitoring and control in COIL laser cutting for joint R and D between Korea and U.S

Energy Technology Data Exchange (ETDEWEB)

Chung, Chin Man; Kim, Cheol Jung; Kim, Min Suk; Baik, Sung Hoon; Kwon, Sung Ok; Park, Sun Kyu

2000-12-01

The laser monitoring and control technique investigated to experiment for cutting kerf width and result of laser cutting for D and D of nuclear facility. The demands for this laser monitoring and control technique were applied to process control in laser cutting and to fabricate monitoring and control system, focusing lens assembly. This system can had a advantage to monitor and control the laser cutting on real time. KAERI investigated the COIL laser and monitored 2 kW laser power.

Development of real-time monitoring and control in COIL laser cutting for joint R and D between Korea and U.S

International Nuclear Information System (INIS)

Chung, Chin Man; Kim, Cheol Jung; Kim, Min Suk; Baik, Sung Hoon; Kwon, Sung Ok; Park, Sun Kyu

2000-12-01

The laser monitoring and control technique investigated to experiment for cutting kerf width and result of laser cutting for D and D of nuclear facility. The demands for this laser monitoring and control technique were applied to process control in laser cutting and to fabricate monitoring and control system, focusing lens assembly. This system can had a advantage to monitor and control the laser cutting on real time. KAERI investigated the COIL laser and monitored 2 kW laser power

Synthesis and characterization of Sr2CeO4: Eu3+ phosphor by different forms

International Nuclear Information System (INIS)

Murthy, K.V.R.; Rao, Ch. Atchyutha; Suresh, K.; Ratna Kumar, B.W.; Nageswara Rao, B.; Poornachandra Rao, N.V.; Subba Rao, B.

2011-01-01

High temperature solid state reaction method was explored to synthesize undoped Sr 2 CeO 4 and Eu 3+ RE doped Sr 2 CeO 4 phosphor using inorganic materials taking in three different forms like, form (i) Strontium Carbonate (SrCO 3 ), Cerium Oxide (CeO 2 ), (ii) Strontium Nitrate (Sr(NO 3 ) 2 ), Cerium Oxide (CeO 2 ) and (iii) Strontium Nitrate (Sr(NO 3 ) 2 ), Cerium Nitrate (Ce(NO 3 ) 3 .6(NH 2 .CO.NH 2 ) in stoichiometric proportions of Sr:Ce as 2:1 and ground into a fine powder using agate mortar and pestle about an hour. The grounded samples were placed in an alumina crucible and fired at 1200 deg C for 3 hours in a muffle furnace with a heating rate of 5 deg C/min. To investigate the crystal structure, phase, morphology and luminescent properties of the synthesized phosphors XRD, SEM, Photoluminescence (PL) spectra, TL and CIE techniques were used. The Photoluminescence (PL) emission and excitation spectra were measured by Spectrofluorophotometer (SHIMADZU, RF-5301 PC) using Xenon lamp as excitation source. To identify the crystal phase, XRD analysis was carried out with a powder diffractometer (Rigaku-D/max 2500) using CuKα radiation. The microstructures of the samples were studied using a scanning electron microscopy (SEM) (XL 30 CP Philips). All the analysis was recorded at room temperature. We have compared the results of the prepared samples by different forms. From the XRD analysis it was found that the prepared phosphors are mostly in single phase of Sr 2 CeO 4 with an orthorhombic structure. From the XRD data, using Scherrer's formula the calculated average crystallite size is (i) ∼ 28 nm (ii) ∼ 9 nm (iii) ∼ 7 nm using FWHM. This indicates that, the prepared phosphors via high temperature solid state reaction method is in nano size. Sr 2 CeO 4 exhibits photoluminescence due to the charge transfer (CT) mechanism. The sample displays a broad excitation spectrum range from ∼ 220 to 400 nm. Under 350 nm excitation, the undoped Sr 2 CeO 4 shows

Quasi-zero-dimensional cobalt-doped CeO2 dots on Pd catalysts for alcohol electro-oxidation with enhanced poisoning-tolerance.

Science.gov (United States)

Tan, Qiang; Zhu, Haiyan; Guo, Shengwu; Chen, Yuanzhen; Jiang, Tao; Shu, Chengyong; Chong, Shaokun; Hultman, Benjamin; Liu, Yongning; Wu, Gang

2017-08-31

Deactivation of an anode catalyst resulting from the poisoning of CO ad -like intermediates is one of the major problems for methanol and ethanol electro-oxidation reactions (MOR & EOR), and remains a grand challenge towards achieving high performance for direct alcohol fuel cells (DAFCs). Herein, we report a new approach for the preparation of ultrafine cobalt-doped CeO 2 dots (Co-CeO 2 , d = 3.6 nm), which can be an effective anti-poisoning promoter for Pd catalysts towards MOR and EOR in alkaline media. Compared to Pd/CeO 2 and pure Pd, the hybrid Pd/Co-CeO 2 nanocomposite catalyst exhibited a much enhanced activity and remarkable anti-poisoning ability for both MOR and EOR. The nanocomposite catalyst showed much higher mass activity (4×) than a state-of-the-art PtRu catalyst. The promotional mechanism was elucidated using extensive characterization and density-functional theory (DFT). A bifunctional effect of the Co-CeO 2 dots was discovered to be due to (i) an enhanced electronic interaction between Co-CeO 2 and Pd dots and (ii) the increased oxygen storage capacity of Co-CeO 2 dots to facilitate the oxidation of CO ad . Therefore, the Pd/Co-CeO 2 nanocomposite appears to be a promising catalyst for advanced DAFCs with low cost and high performance.

Crystal structure of a Ce2Fe2Mg15 compound

International Nuclear Information System (INIS)

Opainich, I.M.; Pavlyuk, V.V.; Bodak, O.I.

1996-01-01

A structure of a new Ce2Fe2Mg15 ternary compound (P63/mmc sp.gr., a=1.0324(5) nm, c=1.02080(4) nm) was determined by powder methods on a DRON-4.07 automatic diffractometer. The structure of a Ce2Fe2Mg15 crystal is a new variant of the ordered Th2Ni17 type superstructure, in which cerium atoms occupy the thorium positions; magnesium atoms occupy the nickel position 6g, 12k, and 12j; and iron atoms occupy the 4f position

Study of the growth of CeO2 nanoparticles onto titanate nanotubes

Science.gov (United States)

Marques, Thalles M. F.; Ferreira, Odair P.; da Costa, Jose A. P.; Fujisawa, Kazunori; Terrones, Mauricio; Viana, Bartolomeu C.

2015-12-01

We report the study of the growth of CeO2 nanoparticles on the external walls and Ce4+ intercalation within the titanate nanotubes. The materials were fully characterized by multiple techniques, such as: Raman spectroscopy, infrared spectroscopy (FTIR), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The ion exchange processes in the titanate nanotubes were carried out using different concentrations of Ce4+ in aqueous solution. Our results indicate that the growth of CeO2 nanoparticles grown mediated by the hydrolysis in the colloidal species of Ce and the attachment onto the titanate nanotubes happened and get it strongly anchored to the titanate nanotube surface by a simple electrostatic interaction between the nanoparticles and titanate nanotubes, which can explain the small size and even distribution of nanoparticles on titanate supports. It was demonstrated that it is possible to control the amount and size of CeO2 nanoparticles onto the nanotube surface, the species of the Ce ions intercalated between the layers of titanate nanotubes, and the materials could be tuned for using in specific catalysis in according with the amount of CeO2 nanoparticles, their oxygen vacancies/defects and the types of Ce species (Ce4+ or Ce3+) present into the nanotubes.

Room-temperature ferromagnetism in pure and Co doped CeO2 powders

International Nuclear Information System (INIS)

Wen Qiye; Zhang Huaiwu; Song Yuanqiang; Yang Qinghui; Zhu Hao; Xiao, John Q

2007-01-01

We report the room-temperature (RT) ferromagnetism (FM) observed in pure and Co doped CeO 2 powder. An insulating nonmagnetic CeO 2 single crystal, after grinding into fine powder, shows an RT-FM with a small magnetization of 0.0045 emu g -1 . However, the CeO 2 powder became paramagnetic after oxygen annealing, which strongly suggests an oxygen vacancy meditated FM ordering. Furthermore, by doping Co into CeO 2 powder the FM can significantly enhance through a F-centre exchange (FCE) coupling mechanism, in which both oxygen vacancies and magnetic ions are involved. As the Co content increases, the FM of Co doped CeO 2 initially increases to a maximum 0.47 emu g -1 , and then degrades very quickly. The complex correlation between the Co content and saturation magnetization was well interpreted by supposing the coexistence of three subsets of Co ions in CeO 2 . Our results reveal that the large RT-FM observed in Co doped CeO 2 powder originates from a combination effect of oxygen vacancies and transition metal doping

Ground-state and isomeric-state cross sections for the {sup 138}Ce(n,2n){sup 137}Ce reaction from its threshold to 20 MeV

Energy Technology Data Exchange (ETDEWEB)

Luo, Junhua [Hexi Univ., Zhangye (China). Inst. of Theoretical Physics; Hexi Univ., Zhangye (China). School of Physics and Electromechanical Engineering; An, Li; Jiang, Li [Chinese Academy of Engineering Physics, Mianyang (China). Inst. of Nuclear Physics and Chemistry

2015-07-01

The cross sections of the {sup 138}Ce(n,2n){sup 137}Ce reactions and their isomeric cross section ratios σ{sub m}/σ{sub g} were measured at three neutron energies between 13.5 and 14.8 MeV using the activation technique. CeO{sub 2} samples and Nb monitor foils were activated together to determine the reaction cross section and the incident neutron flux. The monoenergetic neutron beams were formed via the {sup 3}H(d,n){sup 4}He reaction. The activities induced in the reaction products were measured using high-resolution γ-ray spectroscopy. The pure cross section of the ground-state was derived from the absolute cross section of the metastable state and the residual nuclear decay analysis. The cross sections were also estimated using the nuclear model code, TALYS-1.6 with different level density options at neutron energies varying from the reaction threshold to 20 MeV. Results are discussed and compared with the corresponding literature data.

Au and Pd nanoparticles supported on CeO{sub 2}, TiO{sub 2}, and Mn{sub 2}O{sub 3} oxides

Energy Technology Data Exchange (ETDEWEB)

Nascente, P.A.P., E-mail: nascente@ufscar.br [Federal University of Sao Carlos, Department of Materials Engineering, Sao Carlos, SP (Brazil); Maluf, S.S.; Afonso, C.R.M. [Federal University of Sao Carlos, Department of Materials Engineering, Sao Carlos, SP (Brazil); Landers, R. [State University of Campinas, Institute of Physics, Department of Applied Physics, Campinas, SP (Brazil); Pinheiro, A.N.; Leite, E.R. [Federal University of Sao Carlos, Department of Chemistry, Sao Carlos, SP (Brazil)

2014-10-01

Highlights: • CeO{sub 2}, TiO{sub 2}, and Mn{sub 2}O{sub 3} supported Au and Pd nanoparticles. • Additions of 0.5 wt% of Au and Pd onto CeO{sub 2}, TiO{sub 2}, and Mn{sub 2}O{sub 3} supports. • Characterization by XRD, XPS, EDS, TEM, HRTEM, STEM, and EFTEM. - Abstract: Gold and palladium nanoparticles were incorporated on CeO{sub 2}, TiO{sub 2}, and Mn{sub 2}O{sub 3} supports prepared by a sol–gel method. The samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), high resolution TEM (HRTEM), scanning TEM (STEM) in high angle annular dark field mode (HAADF), and energy filtered TEM (EFTEM) using electron energy loss spectroscopy (EELS). The XRD diffractograms presented sharp and intense peaks indicating that the samples are highly crystalline, but it did not detected any peak corresponding to Au or Pd phases. This indicates that the Au and Pd NPs were incorporated into the structures of the oxides. It was not possible to obtain an Au 4f spectrum for Au/Mn{sub 2}O{sub 3} due to an overlap with the Mn 3p spectrum. The XPS Au 4f spectra for Au/CeO{sub 2} and Au/TiO{sub 2} present negative chemical shifts that could be attributed to particle-size-related properties. The XPS Pd 3d spectra indicate that for both CeO{sub 2} and TiO{sub 2} substrates, the Pd NPs were in the metallic state, while for the Mn{sub 2}O{sub 3} substrate, the Pd NPs were oxidized. The HRTEM results show the formation of nanocrystalline oxides having particles sizes between 50 and 200 nm. TEM micrographs show that the addition of Au caused the formation of Au clusters in between the CeO{sub 2} NPS, formation of Au NPs for the TiO{sub 2} support, and homogeneous distribution of Au clusters for the Mn{sub 2}O{sub 3} support. The addition of Pd yielded a homogeneous dispersion throughout the CeO{sub 2} and TiO{sub 2}, but caused the formation of Pd clusters for the Mn{sub 2}O

Luminescence Properties of Ca19Ce(PO4)14:A (A = Eu3+/Tb3+/Mn2+) Phosphors with Abundant Colors: Abnormal Coexistence of Ce4+/3+-Eu3+ and Energy Transfer of Ce3+ → Tb3+/Mn2+ and Tb3+-Mn2.

Science.gov (United States)

Shang, Mengmeng; Liang, Sisi; Lian, Hongzhou; Lin, Jun

2017-06-05

A series of Eu 3+ /Tb 3+ /Mn 2+ -ion-doped Ca 19 Ce(PO 4 ) 14 (CCPO) phosphors have been prepared via the conventional high-temperature solid-state reaction process. Under UV radiation, the CCPO host presents a broad blue emission band from Ce 3+ ions, which are generated during the preparation process because of the formation of deficiency. The Eu 3+ -doped CCPO phosphors can exhibit magenta to red-orange emission as a result of the abnormal coexistence of Ce 3+ /Ce 4+ /Eu 3+ and the metal-metal charge-transfer (MMCT) effect between Ce 3+ and Eu 3+ . When Tb 3+ /Mn 2+ are doped into the hosts, the samples excited with 300 nm UV light present multicolor emissions due to energy transfer (ET) from the host (Ce 3+ ) to the activators with increasing activator concentrations. The emitting colors of CCPO:Tb 3+ phosphors can be tuned from blue to green, and the CCPO:Mn 2+ phosphors can emit red light. The ET mechanism from the host (Ce 3+ ) to Tb 3+ /Mn 2+ is demonstrated to be a dipole-quadrapole interaction for Ce 3+ → Tb 3+ and an exchange interaction for Ce 3+ → Mn 2+ in CCPO:Tb 3+ /Mn 2+ . Abundant emission colors containing white emission were obtained in the Tb 3+ - and Mn 2+ -codoped CCPO phosphors through control of the levels of doped Tb 3+ and Mn 2+ ions. The white-emitted CCPO:Tb 3+ /Mn 2+ phosphor exhibited excellent thermal stability. The photoluminescence properties have shown that these materials might have potential for UV-pumped white-light-emitting diodes.

Building novel Ag/CeO2 heterostructure for enhancing photocatalytic activity

International Nuclear Information System (INIS)

Leng, Qiang; Yang, Dezhi; Yang, Qi; Hu, Chenguo; Kang, Yue; Wang, Mingjun; Hashim, Muhammad

2015-01-01

Highlights: • Ag nanoparticle is designed to building Schottky heterojunction on CeO 2 nanocube. • The photocatalytic activity of Ag/CeO 2 heterostructure is much enhanced. • 95.33% of MB can be effectively degraded within half an hour. • Ag as acceptor of photoelectrons blocks the recombination of electron–hole pairs. - Abstract: Stable and recyclable photocatalysts with high efficiency to degrade organic contamination are important and widely demanded under the threat of the environment pollution. Ag/CeO 2 heterostructure is designed as a photocatalyst to degrade organic dye under the simulated sunlight. The catalytic activity of CeO 2 nanocubes (NCs) to degrade methylene blue (MB) is obviously enhanced when Ag nanoparticles (NPs) are deposited on the surface of them. The weight ratio of Ag and CeO 2 in forming high efficiency catalyst, the amount of Ag/CeO 2 catalyst used in degradation process, and the dye concentration and pH value of the initial MB solution are examined systematically. 95.33% of MB can be effectively degraded within half an hour when 50 mg of Ag/CeO 2 catalyst in an optimal weight ratio of 1:3, is added to the 100 mL of MB solution (c 0 = 1 × 10 −5 mol L −1 , pH 6.2). The mechanism of the enhanced catalytic activity of Ag/CeO 2 heterostructure is discussed. The photocatalytic degradation rate is found to obey pseudo-first-order kinetics equations according to Langmuir–Hinshelwood model. The intermediate products in different stages during the degradation of MB are analyzed

Surface and bulk 4f-photoemission spectra of CeIn3 and CeSn3

International Nuclear Information System (INIS)

Kim, H.; Tjernberg, O.; Chiaia, G.; Kumigashira, H.; Takahashi, T.; Duo, L.; Sakai, O.; Kasaya, M.; Lindau, I.

1997-01-01

Resonant photoemission spectroscopy was performed on CeIn 3 and CeSn 3 at the 4d-4f and 3d-4f core thresholds. Using the different surface sensitivity between the two photon energies, surface and bulk 4f-photoemission spectra were derived for both compounds. With the noncrossing approximation of the Anderson impurity model, the 4d-4f resonant spectra together with the surface and bulk spectra were self-consistently analyzed to obtain the microscopic parameters such as the 4f-electron energy and the hybridization strength with conduction electrons. The result shows a substantial difference in these parameters between the surface and the bulk, indicating that it is important to take into account the surface effect in analyzing photoemission spectra of Ce compounds. It is also found that the 4f surface core-level shift is different between CeIn 3 and CeSn 3 . copyright 1997 The American Physical Society

Experimental evidence for self-assembly of CeO2 particles in solution: Formation of single-crystalline porous CeO2 nanocrystals

DEFF Research Database (Denmark)

Tan, Hui Ru; Tan, Joyce Pei Ying; Boothroyd, Chris

2012-01-01

Single-crystalline porous CeO2 nanocrystals, with sizes of ∼20 nm and pore diameters of 1-2 nm, were synthesized successfully using a hydrothermal method. Using electron tomography, we imaged the three-dimensional structure of the pores in the nanocrystals and found that the oriented aggregation ...... energy-loss spectroscopy. The oxygen vacancies might play an important role in oxygen diffusion in the crystals and the catalytic activities of single-crystalline porous CeO 2 structures. © 2011 American Chemical Society....

Ce doped NiO nanoparticles as selective NO2 gas sensor

Science.gov (United States)

Gawali, Swati R.; Patil, Vithoba L.; Deonikar, Virendrakumar G.; Patil, Santosh S.; Patil, Deepak R.; Patil, Pramod S.; Pant, Jayashree

2018-03-01

Metal oxide gas sensors are promising portable gas detection devices because of their advantages such as low cost, easy production and compact size. The performance of such sensors is strongly dependent on material properties such as morphology, structure and doping. In the present study, we report the effect of cerium (Ce) doping on nickel oxide (NiO) nano-structured thin film sensors towards various gases. Bare NiO and Ce doped NiO nanoparticles (Ce:NiO) were synthesized by sol-gel method. To understand the effect of Ce doping in nickel oxide, various molar percentages of Ce with respect to nickel were incorporated. The structure, phase, morphology and band-gap energy of as-synthesized nanoparticles were studied by XRD, SEM, EDAX and UV-vis spectroscopy. Thin film gas sensors of all the samples were prepared and subjected to various gases such as LPG, NH3, CH3COCH3 and NO2. A systematic and comparative study reveals an enhanced gas sensing performance of Ce:NiO sensors towards NO2 gas. The maximum sensitivity for NO2 gas is around 0.719% per ppm at moderate operating temperature of 150 °C for 0.5% Ce:NiO thin film gas sensor. The enhanced gas sensing performance for Ce:NiO is attributed to the distortion of crystal lattice caused by doping of Ce into NiO.

Multibiomarker assessment of cerium dioxide nanoparticle (nCeO{sub 2}) sublethal effects on two freshwater invertebrates, Dreissena polymorpha and Gammarus roeseli

Energy Technology Data Exchange (ETDEWEB)

Garaud, M. [Université de Lorraine, CNRS UMR 7360, Laboratoire Interdisciplinaire des Environnements Continentaux (LIEC), Campus Bridoux, Rue du Général Delestraint, 57070 Metz (France); International Consortium for the Environmental Implications of Nanotechnology (iCEINT), Aix en Provence (France); Trapp, J.; Devin, S.; Cossu-Leguille, C.; Pain-Devin, S.; Felten, V. [Université de Lorraine, CNRS UMR 7360, Laboratoire Interdisciplinaire des Environnements Continentaux (LIEC), Campus Bridoux, Rue du Général Delestraint, 57070 Metz (France); Giamberini, L., E-mail: laure.giamberini@univ-lorraine.fr [Université de Lorraine, CNRS UMR 7360, Laboratoire Interdisciplinaire des Environnements Continentaux (LIEC), Campus Bridoux, Rue du Général Delestraint, 57070 Metz (France); International Consortium for the Environmental Implications of Nanotechnology (iCEINT), Aix en Provence (France)

2015-01-15

Highlights: • Gammarids and mussels both accumulated significant amount of waterborne nCeO{sub 2}. • nCeO{sub 2} decreased catalase, lysosomal system size and lipoperoxidation in mussels. • nCeO{sub 2} could exert antioxidant protecting activity in mussels. • In contrast with mussels, no effects of nCeO{sub 2} were observed on Gammarids. - Abstract: Cerium nanoparticles (nCeO{sub 2}) are widely used in everyday products, as fuel and paint additives. Meanwhile, very few studies on nCeO{sub 2} sublethal effects on aquatic organisms are available. We tried to fill this knowledge gap by investigating short-term effects of nCeO{sub 2} at environmentally realistic concentrations on two freshwater invertebrates; the amphipod Gammarus roeseli and the bivalve Dreissena polymorpha, using an integrated multibiomarker approach to detect early adverse effects of nCeO{sub 2} on organism biology. Differences in the behaviour of the organisms and of nanoparticles in the water column led to differential nCeO{sub 2} bioaccumulations, G. roeseli accumulating more cerium than D. polymorpha. Exposure to nCeO{sub 2} led to decreases in the size of the lysosomal system, catalase activity and lipoperoxidation in mussel digestive glands that could result from nCeO{sub 2} antioxidant properties, but also negatively impacted haemolymph ion concentrations. At the same time, no strong adverse effects of nCeO{sub 2} could be observed on G. roeseli. Further experiments will be necessary to confirm the absence of severe nCeO{sub 2} adverse effects in long-term environmentally realistic conditions.

Luminescence characteristics of Pb2+ centres in undoped and Ce3+-doped Lu3Al5O12 single-crystalline films and Pb2+→Ce3+ energy transfer processes

International Nuclear Information System (INIS)

Babin, V.; Gorbenko, V.; Makhov, A.; Mares, J.A.; Nikl, M.; Zazubovich, S.; Zorenko, Yu.

2007-01-01

At 4.2-350 K, the steady-state and time-resolved emission and excitation spectra and luminescence decay kinetics were studied under excitation in the 2.5-15 eV energy range for the undoped and Ce 3+ -doped Lu 3 Al 5 O 12 (LuAG) single-crystalline films grown by liquid phase epitaxy method from the PbO-based flux. The spectral bands arising from the single Pb 2+ -based centres were identified. The processes of energy transfer from the host lattice to Pb 2+ and Ce 3+ ions and from Pb 2+ to Ce 3+ ions were investigated. Competition between Pb 2+ and Ce 3+ ions in the processes of energy transfer from the LuAG crystal lattice was evidenced especially in the exciton absorption region. Due to overlap of the 3.61 eV emission band of Pb 2+ centres with the 3.6 eV absorption band of Ce 3+ centres, an effective nonradiative energy transfer from Pb 2+ ions to Ce 3+ ions takes place, resulting in the appearance of slower component in the luminescence decay kinetics of Ce 3+ centres and decrease of the Ce 3+ -related luminescence intensity

Preparation of Mn doped CeO_2 nanoparticles with enhanced ferromagnetism

International Nuclear Information System (INIS)

Ravi, S.; Winfred Shashikanth, F.

2017-01-01

Spherical-like CeO_2 and Mn-doped CeO_2 using 6-aminohexanoic acid as surfactant exhibit enhanced ferromagnetism. The optical absorption spectra reveal a red shift with a band gap of 2.51 eV. The mechanics of ferromagnetism and the red shift were analyzed. These results provide a promising platform for developing a dilute magnetic semiconductor in spintronics. - Highlights: • Pure and Mn-doped CeO_2 is prepared with aminohexanoic acid as capping. • They exhibit wide optical absorption with red-shift in their band gap. • Mn-doped CeO_2 nanoparticle exhibit hysteresis at room temperature. • Results were promising to use in spintronics and opto-electronics field.

Interchange core/shell assembly of diluted magnetic semiconductor CeO2 and ferromagnetic ferrite Fe3O4 for microwave absorption

Directory of Open Access Journals (Sweden)

Jiaheng Wang

2017-05-01

Full Text Available Core/shell-structured CeO2/Fe3O4 and Fe3O4/CeO2 nanocapsules are prepared by interchange assembly of diluted magnetic semiconductor CeO2 and ferromagnetic ferrite Fe3O4 as the core and the shell, and vice versa, using a facile two-step polar solvothermal method in order to utilize the room-temperature ferromagnetism and abundant O-vacancies in CeO2, the large natural resonance in Fe3O4, and the O-vacancy-enhanced interfacial polarization between CeO2 and Fe3O4 for new generation microwave absorbers. Comparing to Fe3O4/CeO2 nanocapsules, the CeO2/Fe3O4 nanocapsules show an improved real permittivity of 3–10% and an enhanced dielectric resonance of 1.5 times at 15.3 GHz due to the increased O-vacancy concentration in the CeO2 cores of larger grains as well as the O-vacancy-induced enhancement in interfacial polarization between the CeO2 cores and the Fe3O4 shells, respectively. Both nanocapsules exhibit relatively high permeability in the low-frequency S and C microwave bands as a result of the bi-magnetic core/shell combination of CeO2 and Fe3O4. The CeO2/Fe3O4 nanocapsules effectively enhance permittivity and permeability in the high-frequency Ku band with interfacial polarization and natural resonance at ∼15 GHz, thereby improving absorption with a large reflection loss of -28.9 dB at 15.3 GHz. Experimental and theoretical comparisons with CeO2 and Fe3O4 nanoparticles are also made.

Hyperfine fields and spin relaxation of Ce in GdAl2 and DyAl2

International Nuclear Information System (INIS)

Waeckelgaard, E.; Karlsson, E.; Lindgren, B.; Mayer, A.

1987-04-01

We have investigated the ferromagnetic state of the cubic intermetallic compounds GdAl 2 and DyAl 2 with the 140 Ce nuclei using DPAC. The local fields of Ce are for the lowest measured temperatures B eff (30 K) = 54(2) T for GdAl 2 and B eff (12.5 K) = 27(1) T for DyAl 2 which are considerably lower than the hyperfine field measured for a free Ce ion (183 T). By introducing a crystal field, of cubic symmetry, a lower hyperfine field is obtained which is in quantitative agreement with the local field of Ce in GdAl 2 . For DyAl 2 an additional effect, represented by a non-magnetic level below the lowest magnetic level, may explain a further reduction of the hyperfine field. Two models relating to a Kondo non-magnetic state of Ce are discussed. Spin relaxation in the paramagnetic state are also studied and compared with observations of the same systems measured with μSR. (authors)

Facile preparation of self-healing superhydrophobic CeO2 surface by electrochemical processes

Science.gov (United States)

Nakayama, Katsutoshi; Hiraga, Takuya; Zhu, Chunyu; Tsuji, Etsushi; Aoki, Yoshitaka; Habazaki, Hiroki

2017-11-01

Herein we report simple electrochemical processes to fabricate a self-healing superhydrophobic CeO2 coating on Type 304 stainless steel. The CeO2 surface anodically deposited on flat stainless steel surface is hydrophilic, although high temperature-sintered and sputter-deposited CeO2 surface was reported to be hydrophobic. The anodically deposited hydrophilic CeO2 surface is transformed to hydrophobic during air exposure. Specific accumulation of contaminant hydrocarbon on the CeO2 surface is responsible for the transformation to hydrophobic state. The deposition of CeO2 on hierarchically rough stainless steel surface produces superhydrophobic CeO2 surface, which also shows self-healing ability; the surface changes to superhydrophilic after oxygen plasma treatment but superhydrophobic state is recovered repeatedly by air exposure. This work provides a facile method for preparing a self-healing superhydrophobic surface using practical electrochemical processes.

Evaluation of Capacitive Markers Fabricated by 3D Printing, Laser Cutting and Prototyping

Directory of Open Access Journals (Sweden)

Julian Kreimeier

2018-01-01

Full Text Available With Tangible User Interfaces, the computer user is able to interact in a fundamentally different and more intuitive way than with usual 2D displays. By grasping real physical objects, information can also be conveyed haptically, i.e., the user not only sees information on a 2D display, but can also grasp physical representations. To recognize such objects (“tangibles” it is skillful to use capacitive sensing, as it happens in most touch screens. Thus, real objects can be located and identified by the touch screen display automatically. Recent work already addressed such capacitive markers, but focused on their coding scheme and automated fabrication by 3D printing. This paper goes beyond the fabrication by 3D printers and, for the first time, applies the concept of capacitive codes to laser cutting and another immediate prototyping approach using modeling clay. Beside the evaluation of additional properties, we adapt recent research results regarding the optimized detection of tangible objects on capacitive screens. As a result of our comprehensive study, the detection performance is affected by the type of capacitive signal processing (respectively the device and the geometry of the marker. 3D printing revealed to be the most reliable technique, though laser cutting and immediate prototyping of markers showed promising results. Based on our findings, we discuss individual strengths of each capacitive marker type.

Giant Overlap between the Magnetic and Superconducting Phases of CeAu_{2}Si_{2} under Pressure

Directory of Open Access Journals (Sweden)

Z. Ren

2014-09-01

Full Text Available High pressure provides a powerful means for exploring unconventional superconductivity which appears mostly on the border of magnetism. Here, we report the discovery of pressure-induced heavy-fermion superconductivity up to 2.5 K in the antiferromanget CeAu_{2}Si_{2} (T_{N}≈10  K. Remarkably, the magnetic and superconducting phases are found to overlap across an unprecedentedly wide pressure interval from 11.8 to 22.3 GPa. Moreover, both the bulk T_{c} and T_{M} are strongly enhanced when increasing the pressure from 16.7 to 20.2 GPa. T_{c} reaches a maximum at a pressure slightly below p_{c}≈22.5  GPa, at which magnetic order disappears. Furthermore, the scaling behavior of the resistivity provides evidence for a continuous delocalization of the Ce 4f electrons associated with a critical end point lying just above p_{c}. We show that the maximum T_{c} of CeAu_{2}Si_{2} actually occurs at almost the same unit-cell volume as that of CeCu_{2}Si_{2} and CeCu_{2}Ge_{2}, and when the Kondo and crystal-field splitting energies become comparable. Dynamical mean-filed theory calculations suggest that the peculiar behavior in pressurized CeAu_{2}Si_{2} might be related to its Ce-4f orbital occupancy. Our results not only provide a unique example of the interplay between superconductivity and magnetism, but also underline the role of orbital physics in understanding Ce-based heavy-fermion systems.

Remarkable changes in the photoluminescent properties of Y2Ce2O7:Eu(3+) red phosphors through modification of the cerium oxidation states and oxygen vacancy ordering.

Science.gov (United States)

Raj, Athira K V; Prabhakar Rao, P; Sreena, T S; Sameera, S; James, Vineetha; Renju, U A

2014-11-21

A new series of red phosphors based on Eu(3+)-doped yttrium cerate [Y1.9Ce2O7:0.1Eu(3+), Y2Ce1.9O7:0.1Eu(3+) and Y2Ce2-xO7:xEu(3+) (x = 0.05, 0.10, 0.15, 0.20, 0.25 and 0.50)] was prepared via a conventional solid-state method. The influence of the substitution of Eu(3+) at the aliovalent site on the photoluminescent properties was determined by powder X-ray diffraction, FT Raman spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscopy with energy-dispersive spectroscopy, UV-visible absorption spectroscopy, photoluminescence spectroscopy and lifetime measurements. The substitution of Eu(3+) at the Ce(4+) site induces a structural transition from a defect fluorite to a C-type structure, which increases the oxygen vacancy ordering and the distortion of the Eu(3+) environment, and decreases the formation of Ce(3+) states. In contrast, phosphors with isovalent substitution at the Y(3+) site exhibit the biphasic nature of defect fluorite and a C-type structure, thereby increasing the number of Ce(3+) oxidation states. These modifications resulted in remarkable changes in the photoluminescent properties of Y2Ce1.9O7:0.1Eu(3+) red phosphors, with emission intensities 3.8 times greater than those of the Ce0.9O2:0.1Eu(3+) and Y1.9Ce2O7:0.1Eu(3+). The photoluminescent properties of Y2Ce2-xO7:xEu(3+) were studied at different Eu(3+) concentrations under excitation with blue light. These phosphors emit intense red light due to the (5)D0-(7)F2 transition under excitation at 466 nm and no concentration quenching is observed with up to 50 mol% Eu(3+). They show increased lifetimes in the range 0.62-0.72 ms at Eu(3+) concentrations. The cation ordering linked to the oxygen vacancy ordering led to the uniform distribution of Eu(3+) ions in the lattice, thus allowing higher doping concentrations without quenching and consequently increasing the lifetime of the (5)D0 states. Our results demonstrate that significant improvements in

The Cs2SO4-Ce2(SO4)3-H2SO4-H2O system at 150 and 200 deg C

International Nuclear Information System (INIS)

Bondar', S.A.; Belokoskov, V.I.; Trofimov, G.V.

1982-01-01

Solubility in the system Cs 2 SO 4 -Ce 2 (SO 4 ) 3 -H 2 SO 4 -H 2 O using the isothermal method at 150 and 200 deg C at molar ratios Cs 2 SO 4 :Ce 2 (SO 4 ) 3 =1:5 and conditions of sulfate crystallization Cs 2 SO 4 xCe 2 (SO 4 ) 3 , Ce 2 (SO 4 ) 3 x0.5H 2 SO 4 xnH 2 O (n=2-3) and Ce 2 (SO 4 ) 3 x3H 2 SO 4 are determined. Double sulfate Cs 2 SO 4 xCe 2 (SO 4 ) 3 is studied using the methods of crystallooptical, thermal, X-ray phase analyses and IR spectroscopy

Wedge cutting of mild steel by CO 2 laser and cut-quality assessment in relation to normal cutting

Science.gov (United States)

Yilbas, B. S.; Karatas, C.; Uslan, I.; Keles, O.; Usta, Y.; Yilbas, Z.; Ahsan, M.

2008-10-01

In some applications, laser cutting of wedge surfaces cannot be avoided in sheet metal processing and the quality of the end product defines the applicability of the laser-cutting process in such situations. In the present study, CO 2 laser cutting of the wedge surfaces as well as normal surfaces (normal to laser beam axis) is considered and the end product quality is assessed using the international standards for thermal cutting. The cut surfaces are examined by the optical microscopy and geometric features of the cut edges such as out of flatness and dross height are measured from the micrographs. A neural network is introduced to classify the striation patterns of the cut surfaces. It is found that the dross height and out of flatness are influenced significantly by the laser output power, particularly for wedge-cutting situation. Moreover, the cut quality improves at certain value of the laser power intensity.

Room-temperature synthesis and characterization of porous CeO{sub 2} thin films

Energy Technology Data Exchange (ETDEWEB)

Chu, Dewei; Masuda, Yoshitake; Ohji, Tatsuki; Kato, Kazumi [National Institute of Advanced Industrial Science and Technology (AIST), Anagahora, Shimoshidami, Moriyama-ku, Nagoya (Japan)

2012-01-15

CeO{sub 2} thin films with hexagonal-shaped pores were successfully prepared by a facile electrodeposition at room temperature combined with an etching process. By using electrodeposited ZnO nanorods as a soft template, the morphology, and microstructure of the CeO{sub 2} could be controlled. TEM observation indicated that as-prepared CeO{sub 2} film is composed of nanocrystals with average size of several nanometers, while XPS analysis showed the coexistence of Ce{sup 3+} and Ce{sup 4+} in the film. The photoluminescence properties of CeO{sub 2} films were measured, which showed much higher sensitivity compared to bare substrate. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Enhancement of photocatalytic properties of TiO2 nanoparticles doped with CeO2 and supported on SiO2 for phenol degradation

International Nuclear Information System (INIS)

Hao, Chunjing; Li, Jing; Zhang, Zailei; Ji, Yongjun; Zhan, Hanhui; Xiao, Fangxing; Wang, Dan; Liu, Bin; Su, Fabing

2015-01-01

Highlights: • CeO 2 -TiO 2 /SiO 2 composites were prepared via a facile co-precipitation method. • Introduction of SiO 2 support increases the dispersion of CeO 2 -TiO 2 . • CeO 2 -TiO 2 /SiO 2 exhibits an enhanced photocatalytic efficiency for phenol degradation. • Ce 3+ /Ce 4+ pair coexisting in CeO 2 improves electron–hole pairs separation efficiency. - Abstract: A series of CeO 2 -TiO 2 and CeO 2 -TiO 2 /SiO 2 composites were prepared with TiCl 4 and Ce (NO 3 ) 3 ·6H 2 O as precursors via a facile co-precipitation method. The obtained samples were characterized by various techniques such as X-ray diffraction (XRD), nitrogen adsorption (N 2 -BET), Fourier transformation infrared spectrum (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV–Vis spectroscopy measurements. The results indicated that TiO 2 doped with CeO 2 and supported on SiO 2 could reduce the crystallite size, inhibit the phase transformation, enhance the thermal stability, and effectively extend the spectral response from UV to visible range. When applied to the phenol photodegradation on a homemade batch reactor with an external cooling jacket, the CeO 2 -TiO 2 /SiO 2 catalysts exhibited significantly enhanced photodegradation efficiency in comparison with commercial Degussa P25 and CeO 2 -TiO 2 . The unique catalytic properties of CeO 2 -TiO 2 /SiO 2 were ascribed to improved electron–hole pairs separation efficiency and formation of more reactive oxygen species owing to the presence of Ce 3+ /Ce 4+ , as well as high dispersion of active component of CeO 2 -TiO 2 as a result of the introduction of SiO 2 support. Furthermore, the catalysts can be easily recovered from the reaction solution by centrifugation and reused for four cycles without significant loss of activity

Influence of chemical composition on the X-ray photoemission, thermopower, specific heat, and magnetic properties of CeNi{sub 2}(Si{sub 1-y}Ge{sub y}){sub 2}

Energy Technology Data Exchange (ETDEWEB)

Tolinski, T.; Synoradzki, K. [Polish Academy of Sciences, Institute of Molecular Physics, Poznan (Poland); Bajorek, A.; Chelkowska, G. [Silesian University, Institute of Physics, Katowice (Poland); Koterlyn, M. [K. Wielkiego University, Institute of Physics, Bydgoszcz (Poland); Ivan Franko National University of L' viv, Faculty of Electronics, L' viv (Ukraine); Koterlyn, G. [National Academy of Sciences of Ukraine and Ministry of Education and Science of Ukraine, Western Scientific Center, L' viv (Ukraine); Yasnitskii, R. [Ivan Franko National University of L' viv, Faculty of Electronics, L' viv (Ukraine)

2017-06-15

We report our studies of the intermediate compositions between CeNi{sub 2}Si{sub 2} and CeNi{sub 2}Ge{sub 2}, i.e., the alloys CeNi{sub 2}(Si{sub 1-y}Ge{sub y}){sub 2} by means of the thermopower, electrical resistivity, specific heat, magnetic susceptibility, and X-ray photoemission measurements. CeNi{sub 2}Si{sub 2} is a fluctuating valence system and CeNi{sub 2}Ge{sub 2} is known to show the heavy fermion behaviour. The change of the temperature dependence of the resistivity towards the typical metallic behaviour occurs below y ∝ 0.25. The transition between CeNi{sub 2}Si{sub 2} and CeNi{sub 2}Ge{sub 2} is discussed in the frames of competition between the crystal electric field and Kondo interactions. It is found that valence stabilisation occurs for Ge content y > 0.25. The hybridization energy Δ determined from the XPS Ce 3d spectrum reflects well the behaviour of the parameter E{sub ex} obtained from the analysis of the magnetic susceptibility by the interconfiguration fluctuation model. It has been also shown that thermopower data can be successfully described employing the single ion model for 0.6 < y < 1.0 and two-band model including the crystal electric field splitting for y ≤ 0.25. (orig.)

Pyrazolates advance cerium chemistry: a CeIII/CeIV redox equilibrium with benzoquinone.

Science.gov (United States)

Werner, Daniel; Deacon, Glen B; Junk, Peter C; Anwander, Reiner

2017-05-16

Two stable cerium(iv) 3,5-dialkylpyrazolate complexes are presented, namely dimeric [Ce(Me 2 pz) 4 ] 2 (Me 2 pz = 3,5-dimethylpyrazolate) and monomeric Ce(tBu 2 pz) 4 (tBu 2 pz = 3,5-di-tert-butylpyrazolate) along with their trivalent counterparts [Ce(Me 2 pz) 3 ] and [Ce(tBu 2 pz) 3 ] 2 . All complexes were obtained from protonolysis reactions employing the silylamide precursors Ce[N(SiHMe 2 ) 2 ] 4 and Ce[N(SiMe 3 ) 2 ] 3 . Treatment of homoleptic Ce IV and Ce III Me 2 pz complexes with 1,4-hydroquinone (H 2 hq) or 1,4-benzoquinone (bq), respectively, ultimately gave the same trimetallic Ce III species via a cerium redox equilibrium. The Ce III complex Ce 3 (Me 2 pz) 5 (pchd) 2 (L) (pchd = 1,4-bis(3,5-dimethylpyrazol-1-yl)cyclohex-2,5-diene-1,4-diolato; L = Me 2 pzH or (thf) 2 ) results from a di-1,4-pyrazolyl attack on pre-coordinated bq. The reduction of bq by [Ce(Me 2 pz) 3 (thf)] 2 , and re-oxidation by the resulting Ce IV species was supported by UV-vis spectroscopic investigations. Comparisons with the redox-innocent complexes [Ln(Me 2 pz) 3 (thf)] 2 (Ln = La and Pr) revealed far less selective reactions with bq, giving hexametallic and octametallic rare-earth metal side products containing 2-Me 2 pz substituted hq ligands.

New limits on 2ε, εβ{sup +} and 2β{sup +} decay of {sup 136}Ce and {sup 138}Ce with deeply purified cerium sample

Energy Technology Data Exchange (ETDEWEB)

Belli, P.; Bernabei, R. [INFN Sezione Roma ' ' Tor Vergata' ' , Rome (Italy); Universita di Roma ' ' Tor Vergata' ' , Dipartimento di Fisica, Rome (Italy); Boiko, R.S. [Institute for Nuclear Research, Kyiv (Ukraine); National University of Life and Environmental Sciences of Ukraine, Kyiv (Ukraine); Cappella, F. [INFN Sezione Roma, Rome (Italy); Cerulli, R.; Laubenstein, M. [INFN, Laboratori Nazionali del Gran Sasso, Assergi (Italy); Danevich, F.A.; Kropivyansky, B.N.; Polischuk, O.G.; Tretyak, V.I. [Institute for Nuclear Research, Kyiv (Ukraine); Incicchitti, A. [INFN Sezione Roma, Rome (Italy); Universita di Roma ' ' La Sapienza' ' , Dipartimento di Fisica, Rome (Italy); Mokina, V.M. [Institute for Nuclear Research, Kyiv (Ukraine); INFN Sezione Roma, Rome (Italy)

2017-08-15

A search for double electron capture (2ε), electron capture with positron emission (εβ{sup +}), and double positron emission (2β{sup +}) in {sup 136}Ce and {sup 138}Ce was realized with a 465 cm{sup 3} ultra-low background HP Ge γ spectrometer over 2299 h at the Gran Sasso underground laboratory. A 627 g sample of cerium oxide deeply purified by liquid-liquid extraction method was used as a source of γ quanta expected in double β decay of the cerium isotopes. New improved half-life limits were set on different modes and channels of double β decay of {sup 136}Ce and {sup 138}Ce at the level of T{sub 1/2} > 10{sup 17}-10{sup 18} yr. (orig.)

Stability of fluorite-type La{sub 2}Ce{sub 2}O{sub 7} under extreme conditions

Energy Technology Data Exchange (ETDEWEB)

Zhang, F.X., E-mail: zhangfx@umich.edu [Department of Earth and Environmental Sciences, The University of Michigan, Ann Arbor, MI 48109 (United States); State Key Laboratory of Metastable Materials Science & Technology, Yanshan University, Qinhuangdao, Hebei 066004 (China); Tracy, C.L. [Department of Materials Science and Engineering, The University of Michigan, Ann Arbor, MI 48109 (United States); Lang, M. [Department of Nuclear Engineering, University of Tennessee, Knoxville, TN 37966 (United States); Ewing, R.C. [Department of Geological Sciences, Stanford University, Stanford, CA 94305 (United States)

2016-07-25

The structural stability of fluorite-type La{sub 2}Ce{sub 2}O{sub 7} was studied at pressure up to ∼40 GPa and under hydrothermal conditions of ∼1 GPa and up to 350 °C, respectively, using synchrotron X-ray diffraction (XRD) and Raman scattering measurements. XRD measurements indicated that the fluorite-type La{sub 2}Ce{sub 2}O{sub 7} is not stable at pressures greater than 22.6 GPa and gradually transformed to a high-pressure phase. The high-pressure phase is not stable and changed back to the fluorite-type structure when pressure is released. The La{sub 2}Ce{sub 2}O{sub 7} fluorite is also not stable under hydrothermal conditions and began to react with water at 200–250 °C. Both Raman and XRD results suggest that lanthanum hydroxide La(OH){sub 3} and La{sup 3+}-doped CeO{sub 2} fluorite are the dominant products after hydrothermal treatment. - Graphical abstract: The fluorite-type La{sub 2}Ce{sub 2}O{sub 7} reacted with water at hydrothermal condition (1 GPa, and above 200 °C), and formed rare earth hydroxides. - Highlights: • La{sub 2}Ce{sub 2}O{sub 7} transforms to a metastable phase at pressure higher than 21 GPa. • La{sub 2}Ce{sub 2}O{sub 7} reacts with water at ∼1 GPa and above 200 °C. • The pressure-induced phase transition is reversible.

Water-based synthesis of TiO2/CeO2 composites supported on plasma-treated montmorillonite for parathion methyl degradation

Czech Academy of Sciences Publication Activity Database

Henych, Jiří; Kormunda, M.; Šťastný, Martin; Janoš, P.; Vomáčka, Petr; Matoušek, J.; Štengl, Václav

2017-01-01

Roč. 144, AUG (2017), s. 26-35 ISSN 0169-1317 R&D Projects: GA MŠk(CZ) LM2015073 Institutional support: RVO:61388980 Keywords : Montmorillonite * Parathion methyl * Plasma treatment * TiO2 /CeO2 composites Subject RIV: CA - Inorganic Chemistry OBOR OECD: Inorganic and nuclear chemistry Impact factor: 3.101, year: 2016

Multi-q Mesoscale Magnetism in CeAuSb2

DEFF Research Database (Denmark)

Marcus, Guy G.; Kim, Dae-Jeong; Tutmaher, Jacob A.

2018-01-01

We report the discovery of a field driven transition from a single-q to multi-q spin density wave (SDW) in the tetragonal heavy fermion compound CeAuSb2. Polarized along c, the sinusoidal SDW amplitude is 1.8ð2ÞμB/Ce for T ≪ TN ¼ 6.25ð10Þ K with a wave vector q1 ¼ ðη; η; 1/2Þ ½η ¼ 0.136ð2Þ. For H...

Crystal structure of RbCe(SeO4)2 · 5H2O

International Nuclear Information System (INIS)

Ovanesyan, S.M.; Iskhakova, L.D.; Trunov, V.K.

1987-01-01

RbTR(SeO 4 ) 2 x5H 2 O TR=La-Pr are synthesized. Crystal structure of RbCe(SeO 4 ) 2 x5H 2 O is studied. Monoclinic unit parameters are: a=7,200(2), b=8,723(1), c=19,258(6) A, Β=90,88(2), ρ (calc) =3,304 sp.gr. P2 1 /c. Within the structure the Ce nine vertex cages are united by Se(1)- and Se(2)-tetrahedrons in (Ce(SeO 4 ) 2 (H 2 O) 5 ) 2 ∞ n- layers. Some crystal structure regularities of the laminated MTR(EO 4 ) 2 xnH 2 O (M=NH 4 ,K,Rb,Cs; TR=La-Ln, E=S,Se) are considered

Electrochemical impedance spectroscopy study during accelerated life test of conductive oxides: Ti/(Ru + Ti + Ce)O2-system

International Nuclear Information System (INIS)

Silva, Leonardo M. da; Fernandes, Karla C.; Faria, Luiz A. de; Boodts, Julien F.C.

2004-01-01

Ti-supported (Ru + Ti + Ce)O 2 -electrodes were prepared at 450d deg. C and the service life, t 6V , determined recording chronopotentiometric curves at 0.75Acm -2 (25 ± 1 deg. C). The results revealed a strong influence of the nominal cerium concentration, [CeO 2 ] N , on t 6V , showing substitution of Ti by Ce causes a major decrease in t 6V . The degree of electrode instability, Λ, calculated from the slope of the linear segment present in the chronopotentiometric profiles, showed [CeO 2 ] N exerts a strong influence on Λ. Voltammetric curves recorded at several anodisation times, t, support final electrode deactivation is due to Ti-support passivation. The chronopotentiometric and voltammetric data permitted to present a model for the porous electrode/electrolyte interface. The electrochemical impedance spectroscopic, EIS, investigation as function of t supports the proposed model denouncing a fast growth a TiO 2 interlayer at the Ti o /oxide interface for [CeO 2 ] N >= 30mol%. The studies also support substitution of Ti by Ce leads to an increase in the coating porosity, thus favouring electrode deactivation by passivation of the Ti-substrate. The model proposed for the porous electrode/electrolyte interface combined with the results of the EIS investigation permitted to propose an equivalent circuit to describe the modifications occurring in the electrode structure during anodisation. The true electrocatalytic activity for the oxygen evolution reaction, OER, depends on t and [CeO 2 ] N . The dependency of the inductive behaviour on t was investigated according to the model proposed for the effective inductance, L E , in the high frequency domain

Study of the defect structure of ''pure'' and doped nonstoichiometric CeO2

International Nuclear Information System (INIS)

Blumenthal, R.N.

1975-09-01

Electrical conductivity and thermogravimetric measurements were made on Ta 2 O 5 -doped nonstoichiometric CeO 2 (i.e. Ce/sub 1-y/Ta/sub y/O/sub 2-x/ ) as a function of temperature and oxygen partial pressure. Over a limited range of temperature and nonstoichiometry, the isothermal dependence of the electrical conductivity on nonstoichiometry may be described by the equation sigma = A + Bx, where A is the electronic conductivity associated with the electronic defects produced by doping CeO 2 with Ta 2 O 5 . The electronic conductivity resulting from the nonstoichiometric defect reaction O/sup x/ + 2Ce/sub Ce//sup x/ = V 0 + 2Ce'sub Ce/ + 1 / 2 O 2 (g) is equal to Bx. The ionic conductivity may be described by the relation sigma/sub i/ = B[y+x]eμ'/sub V 0 / exp (--E/sub i//kT), and the electronic conductivity by the isothermal expressions sigma/sub e/ proportional to P/sub O 2 //sup -1/4/ and sigma/sub e/ proportional to x; x less than 3 x 10 -2 . These results are consistent with defect models involving doubly ionized oxygen vacancies. An empirical expression (i.e. Δ anti H/sub O 2 / proportional to y/2 or z/4) was obtained relating the dependence of Δ anti H/sub O 2 / on the dopant concentration of lower valent foreign cations (e.g. y/2 for Ce/sub 1-y/M/sub y/O/sub 2-y-x/ and z/4 for Ce/sub 1-z/M/sub z/O/sub 2-z/2-x/ where M = Ca, Sr and M' = Y, La). (auth)

Tunable colorimetric performance of Al{sub 2}O{sub 3}-YAG:Ce{sup 3+} eutectic crystal by Ce{sup 3+} concentration

Energy Technology Data Exchange (ETDEWEB)

Sai, Qinglin, E-mail: saiql@siom.ac.cn; Xia, Changtai, E-mail: xia_ct@siom.ac.cn

2017-06-15

Ce-doped Al{sub 2}O{sub 3}-YAG eutectics with different percentage of Ce were successfully grown by the optical floating zone technique. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to investigate the structure. The results show that they have typical eutectic structure of interpenetrating sapphire and garnet phases with the tens of microns lamella spacing. The photoluminescence spectra of the eutectics showed that they have wide excitation band, and samples with 1.6 mol% Ce-doped has the highest emission intensity. The eutectic-packaged LED has high luminous efficiency and its color can be modulated by changing Ce concentration. The results reveal that Ce-doped Al{sub 2}O{sub 3}-YAG eutectic is a promising phosphor for white LED applications.

Lanthanum cerate (La2Ce2O7): hydrothermal synthesis, characterization and optical properties

Science.gov (United States)

Khademinia, Shahin; Behzad, Mahdi

2015-03-01

La2Ce2O7 nano-powders were synthesized via a hydrothermal reaction in a deionized water (S 1) and in a 2 M NaOH aqueous solution (S 2) at 180 °C for 48 h. La(NO3)3·H2O and (NH4)2Ce(NO3)6 were used in the stoichiometric 1:1 La:Ce molar ratio as raw materials. The obtained materials were crystallized in a cubic crystal structure with space group. The synthesized materials were characterized by powder X-ray diffraction technique and Fourier-transform infrared spectroscopy. To investigate the effect of the basic solution on the morphology of the obtained materials, the morphologies of the synthesized materials were studied by field emission scanning electron microscopy technique. The technique showed that the morphology of La2Ce2O7 samples changed from grain to rod-like structure in presence of the basic solution. Cell parameter refinements showed that these parameters were larger for S2 than those for S 1. Photoluminescence and ultraviolet visible spectra of the synthesized nanomaterials were also investigated.

A Numerical Approach and Comparison of Cutting Forces and Chip Morphology in Orthogonal Cutting of Light Alloys

International Nuclear Information System (INIS)

Alvarez, Roberto; Domingo, Rosario; Sebastian, Miguel Angel

2011-01-01

This paper deals with the simulation of UNS A92024 aluminium alloy cutting processes. In particular, 2D and 3D Finite Element Method (FEM) simulations were carried out in order to estimate cutting forces and chip morphology during turning operations. The material is modelled with two different set of parameters for the Johnson--Cook's (J-C) constitutive equation and a failure Cockroft and Latham's model exploited considers damage. The comparison between the predicted chip morphology and principal cutting forces at varying of J-C parameters and cutting regimes with those experimentally found are presented and discussed. The paper shows the importance of damage criterion in the cutting forces, during the simulation, especially in 3D.

Synthesis of nanocrystalline CeO2 particles by different emulsion methods

International Nuclear Information System (INIS)

Supakanapitak, Sunisa; Boonamnuayvitaya, Virote; Jarudilokkul, Somnuk

2012-01-01

Cerium oxide nanoparticles were synthesized using three different methods of emulsion: (1) reversed micelle (RM); (2) emulsion liquid membrane (ELM); and (3) colloidal emulsion aphrons (CEAs). Ammonium cerium nitrate and polyoxyethylene-4-lauryl ether (PE4LE) were used as cerium and surfactant sources in this study. The powder was calcined at 500 °C to obtain CeO 2 . The effect of the preparation procedure on the particle size, surface area, and the morphology of the prepared powders were investigated. The obtained powders are highly crystalline, and nearly spherical in shape. The average particle size and the specific surface area of the powders from the three methods were in the range of 4–10 nm and 5.32–145.73 m 2 /g, respectively. The CeO 2 powders synthesized by the CEAs are the smallest average particle size, and the highest surface area. Finally, the CeO 2 prepared by the CEAs using different cerium sources and surfactant types were studied. It was found that the surface tensions of cerium solution and the type of surfactant affect the particle size of CeO 2 . - Graphical Abstract: The emulsion droplet size distribution and the TEM images of CeO 2 prepared by different methods: reversed micelle (RM), emulsion liquid membrane (ELM) and colloidal emulsion aphrons (CEAs). Highlights: ► Nano-sized CeO 2 was successfully prepared by three different emulsion methods. ► The colloidal emulsion aphrons method producing CeO 2 with the highest surface area. ► The surface tensions of a cerium solution have slightly effect on the particle size. ► The size control could be interpreted in terms of the adsorption of the surfactant.

Synthesis, characterization, and ecotoxicity of CeO{sub 2} nanoparticles with differing properties

Energy Technology Data Exchange (ETDEWEB)

Alam, Bushra [Aero Shade Technologies Inc (United States); Philippe, Allan, E-mail: philippe@uni-landau.de; Rosenfeldt, Ricki R.; Seitz, Frank [University of Koblenz-Landau, Group of Environmental and Soil Chemistry, Institute for Environmental Sciences (Germany); Dey, Sonal [SUNY Polytechnic Institute, Colleges of Nanoscale Science and Engineering (United States); Bundschuh, Mirco; Schaumann, Gabriele E. [University of Koblenz-Landau, Group of Environmental and Soil Chemistry, Institute for Environmental Sciences (Germany); Brenner, Sara A. [SUNY Polytechnic Institute, Colleges of Nanoscale Science and Engineering (United States)

2016-10-15

CeO{sub 2} nanoparticles with various characteristics find an increasing number of applications in the electronic, medical, and other industries and are therefore likely released in the environment. This calls for investigations linking the physicochemical properties of these particles with their potential environmental impacts. In this study, CeO{sub 2} nanoparticle powders were prepared using three different precursors [Ce(NO{sub 3}){sub 3}, CeCl{sub 3}, and Ce(CH{sub 3}COO){sub 3}] and annealing temperatures (300, 500, and 700 °C). This procedure resulted in nine different types of nanoparticles with differing size (5–90 nm), morphology, surface Ce{sup 3+}/Ce{sup 4+} ratio, and slightly different crystal structures as characterized using transmission electron microscopy, dynamic light scattering, X-ray photoelectron spectroscopy, and X-ray diffraction measurements with Rietveld refinement. These CeO{sub 2} nanoparticles underwent toxicity testing at concentrations up to 64 mg L{sup −1} using Daphnia magna. Toxic effects were observed for three particle types with EC50 values between 5 and 64 mg L{sup −1}. No clear correlation was observed between the physicochemical properties (size, shape, oxygen occupancy, Ce{sup 3+}/Ce{sup 4+} ratio) of the nanoparticles and their toxicity. However, toxicity was correlated with the amount of Ce remaining suspended in the test medium after 24 h. This indicated that toxic effects may depend on the colloidal stability of CeO{sub 2} nanoparticles during the first day of exposure. Therefore, being readily suspended and remaining stable for several days in the aquatic media increases the likelihood that CeO{sub 2} nanoparticles will cause unwanted adverse effects.

Kinetics and mechanism of RuIII catalysed oxidation of 1,2,3,4-tetrahydro-naphthalene (tetralin) by CeIV in aqueous nitric acid medium

International Nuclear Information System (INIS)

Vijaya Bhaskar Rao, N.; Anand Rao, M.

2009-01-01

The kinetics and mechanism of Ru III catalysed oxidation of 1,2,3,4-tetrahydronaphthalene (tetralin) by Ce IV in aqueous nitric acid to tetralone under the conditions (TL) > > (Ce IV ) at different temperatures (30-50 deg C) have been studied in 3.0 mol dm -3 nitric acid medium. The experimentally observed rate law conforms to -d(Ce IV )/dt = kK(Ce IV )(TL)(Ru III )/l + K(TL) + K(Ru III ). (author)

Synthesis, Characterization and Properties of CeO2-doped TiO2 Composite Nanocrystals

Directory of Open Access Journals (Sweden)

Oman ZUAS

2013-12-01

Full Text Available Pure TiO2 and CeO2-doped TiO2 (3 % CeO2-97 %TiO2 composite nanocrystals were synthesized via co-precipitation method and characterized using TGA, XRD, FTIR, DR-UV-vis and TEM. The XRD data revealed that the phase structure of the synthesized samples was mainly in pure anatase having crystallite size in the range of 7 nm – 11 nm. Spherical shapes with moderate aggregation of the crystal particles were observed under the TEM observation. The presence of the CeO2 at TiO2 site has not only affected morphologically but also induced the electronic property of the TiO2 by lowering the band gap energy from 3.29 eV (Eg-Ti to 3.15 eV (Eg-CeTi. Performance evaluation of the synthesized samples showed that both samples have a strong adsorption capacity toward Congo red (CR dye in aqueous solution at room temperature experiment, where  the capacity of the CeTi was higher than the Ti sample. Based on DR-UV data, the synthesized samples obtained in this study may also become promising catalysts for photo-assisted removal of synthetic dye in aqueous solution. DOI: http://dx.doi.org/10.5755/j01.ms.19.4.2732

Electrical and microstructural properties of Yb-doped CeO2

Directory of Open Access Journals (Sweden)

B. Matović

2014-06-01

Full Text Available Nanopowdered Ce1−xYbxO2−δ solid solutions (0 ≤ x ≤ 0.2 were synthesized by a self-propagating room temperature synthesis. XRD and SEM were used to study the properties of these materials as well as the Yb solubility in CeO2 lattice. Results showed that all the obtained powders were solid solutions with a fluorite-type crystal structure and with nanometric particle size. The average size of Ce1−xYbxO2−δ particles was approximately 3 nm. Electrochemical impedance spectroscopy for the sintered pellets depicted that it was possible to separate Rbulk and Rgb in the temperature interval of 550–800 °C. The activation energy for the bulk conduction was 1.03 eV and for grain boundary conduction was 1.14 eV. Grain boundary resistivity dominates over the other resistivities. These measurements confirmed that Yb3+-doped CeO2 material had a potential as electrolyte for intermediate-temperature solid oxide fuel cell applications.

Building novel Ag/CeO{sub 2} heterostructure for enhancing photocatalytic activity

Energy Technology Data Exchange (ETDEWEB)

Leng, Qiang; Yang, Dezhi; Yang, Qi [Department of Applied Physics, Chongqing University, Chongqing 400044 (China); Hu, Chenguo, E-mail: hucg@cqu.edu.cn [Department of Applied Physics, Chongqing University, Chongqing 400044 (China); Kang, Yue; Wang, Mingjun [Department of Applied Physics, Chongqing University, Chongqing 400044 (China); Hashim, Muhammad [Department of Applied Physics, Chongqing University, Chongqing 400044 (China); Applied Physics Department, Federal Urdu University of Arts Science and Technology, Islamabad (Pakistan)

2015-05-15

Highlights: • Ag nanoparticle is designed to building Schottky heterojunction on CeO{sub 2} nanocube. • The photocatalytic activity of Ag/CeO{sub 2} heterostructure is much enhanced. • 95.33% of MB can be effectively degraded within half an hour. • Ag as acceptor of photoelectrons blocks the recombination of electron–hole pairs. - Abstract: Stable and recyclable photocatalysts with high efficiency to degrade organic contamination are important and widely demanded under the threat of the environment pollution. Ag/CeO{sub 2} heterostructure is designed as a photocatalyst to degrade organic dye under the simulated sunlight. The catalytic activity of CeO{sub 2} nanocubes (NCs) to degrade methylene blue (MB) is obviously enhanced when Ag nanoparticles (NPs) are deposited on the surface of them. The weight ratio of Ag and CeO{sub 2} in forming high efficiency catalyst, the amount of Ag/CeO{sub 2} catalyst used in degradation process, and the dye concentration and pH value of the initial MB solution are examined systematically. 95.33% of MB can be effectively degraded within half an hour when 50 mg of Ag/CeO{sub 2} catalyst in an optimal weight ratio of 1:3, is added to the 100 mL of MB solution (c{sub 0} = 1 × 10{sup −5} mol L{sup −1}, pH 6.2). The mechanism of the enhanced catalytic activity of Ag/CeO{sub 2} heterostructure is discussed. The photocatalytic degradation rate is found to obey pseudo-first-order kinetics equations according to Langmuir–Hinshelwood model. The intermediate products in different stages during the degradation of MB are analyzed.

On the mechanism of nanoparticulate CeO{sub 2} toxicity to freshwater algae

Energy Technology Data Exchange (ETDEWEB)

Angel, Brad M., E-mail: Brad.Angel@csiro.au [Centre for Environmental Contaminants Research, CSIRO Land and Water Flagship, Locked Bag 2007, Kirrawee, NSW 2232 (Australia); Vallotton, Pascal [Digital Productivity Flagship, CSIRO, North Ryde, NSW 1670 (Australia); Apte, Simon C. [Centre for Environmental Contaminants Research, CSIRO Land and Water Flagship, Locked Bag 2007, Kirrawee, NSW 2232 (Australia)

2015-11-15

Highlights: • Nanoparticulate CeO{sub 2} less toxic than micron-sized CeO{sub 2}. • UV light filters prevented ROS generation by CeO{sub 2}. • ROS not toxic mechanism: CeO{sub 2} toxicity was similar in presence and absence of ROS. • Strong sorption of nanoparticulate CeO{sub 2} to Pseudokirchneriella subcapitata in synthetic fresh water. • CeO{sub 2} sorption to cells was prevented and toxicity mitigated in the presence of DOC. - Abstract: The factors affecting the chronic (72-h) toxicity of three nanoparticulate (10–34 nm) and one micron-sized form of CeO{sub 2} to the green alga, Pseudokirchneriella subcapitata were investigated. To characterise transformations in solution, hydrodynamic diameters (HDD) were measured by dynamic light scatter, zeta potential values by electrophoretic mobility, and dissolution by equilibrium dialysis. The protective effects of humic and fulvic dissolved organic carbon (DOC) on toxicity were also assessed. To investigate the mechanisms of algal toxicity, the CytoViva hyperspectral imaging system was used to visualise algal–CeO{sub 2} interactions in the presence and absence of DOC, and the role of reactive oxygen species (ROS) was investigated by ‘switching off’ ROS production using UV-filtered lighting conditions. The nanoparticulate CeO{sub 2} immediately aggregated in solution to HDDs measured in the range 113–193 nm, whereas the HDD and zeta potential values were significantly lower in the presence of DOC. Negligible CeO{sub 2} dissolution over the time course of the bioassay ruled out potential toxicity from dissolved cerium. The nanoparticulate CeO{sub 2} concentration that caused 50% inhibition of algal growth rate (IC50) was in the range 7.6–28 mg/L compared with 59 mg/L for micron-sized ceria, indicating that smaller particles were more toxic. The presence of DOC mitigated toxicity, with IC50s increasing to greater than 100 mg/L. Significant ROS were generated in the nanoparticulate CeO{sub 2

Reduced graphene oxide/CeO{sub 2} nanocomposite with enhanced photocatalytic performance

Energy Technology Data Exchange (ETDEWEB)

Kaur, Jasmeet, E-mail: jasmeet.dayal@gmail.com; Anand, Kanika; Singh, Gurpreet; Hastir, Anita; Virpal,; Singh, Ravi Chand [Laboratory For Sensors and Physics Education, Department of Physics, GND University, Amritsar-143005 (India); Anand, Kanica [Semiconductors Laboratory, Department of Physics, GND University, Amritsar– 143005 (India)

2015-05-15

In this work, reduced graphene oxide /cerium oxide (RGO/CeO{sub 2}) nanocomposite was synthesized by in situ reduction of cerium nitrate Ce(NO{sub 3}){sub 3}·6H{sub 2}O in the presence of graphene oxide by hydrazine hydrate (N{sub 2}H{sub 4}.H{sub 2}O). The intrinsic characteristics of as-prepared nanocomposite were studied using powder x-ray diffraction (XRD), Raman spectroscopy and field-emission scanning electron microscopy (FESEM). The photocatalytic degradation of methylene blue (MB) was employed as a model reaction to evaluate the photocatalytic activity of the RGO/CeO{sub 2} nanocomposite. The as-obtained RGO/CeO{sub 2} nanocomposite displays a significantly enhanced photocatalytic degradation of MB dye in comparison with bare CeO{sub 2} nanoparticles under sunlight irradiation, which can be attributed to the improved separation of electron-hole pairs and enhanced adsorption performance due to presence of RGO.

Photocatalytic activity of the binary composite CeO{sub 2}/SiO{sub 2} for degradation of dye

Energy Technology Data Exchange (ETDEWEB)

Phanichphant, Sukon [Materials Science Research Center, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Nakaruk, Auppatham [Department of Industrial Engineering, Faculty of Engineering, Naresuan University, Phitsanulok 65000 (Thailand); Centre of Excellence for Innovation and Technology for Water Treatment, Naresuan University, Phitsanulok 65000 (Thailand); Channei, Duangdao, E-mail: duangdaoc@nu.ac.th [Department of Chemistry, Faculty of Science, Naresuan University, Phitsanulok 65000 (Thailand); Research Center for Academic Excellence in Petroleum, Petrochemicals and Advanced Materials, Naresuan University, Phitsanulok 65000 (Thailand)

2016-11-30

Highlights: • The enhanced photocatalytic activity of the CeO{sub 2}/SiO{sub 2} composite can be explained by the presence of the SiO{sub 2} adsorbent, which effectively increased the surface area of the CeO{sub 2}. • The increased surface area of CeO{sub 2} should be helpful to facilitate more effective adsorption sites, which enhances the photocatalytic degradation of organic pollutant significantly. • SiO{sub 2} modification is effective in separating the photogenerated electrons and holes, which is of great importance for photocatalytic activity. • SiO{sub 2} acted as a carrier for CeO{sub 2} attachment and avoided the agglomeration of CeO{sub 2} particles. - Abstract: In this study, CeO{sub 2} photocatalyst was modified by composite with SiO{sub 2} to increase efficiency and improve photocatalytic activity. The as-prepared SiO{sub 2} particles have been incorporated into the precursor mixture of CeO{sub 2} by homogeneous precipitation and subsequent calcination process. The phase compositions of CeO{sub 2} before and after compositing with SiO{sub 2} were identified by X-ray diffraction (XRD). The morphology and particle size of CeO{sub 2}/SiO{sub 2} composite was analyzed by high resolution transmission electron microscopy (HRTEM) and field emission scanning electron microscopy (FESEM). The results showed SiO{sub 2} spheres with the particle size approximately 100–120 nm, and a uniform layer of CeO{sub 2} nanoparticles with a diameter of about 5–7 nm that were fully composite to the surfaces of SiO{sub 2}. The X-ray photoelectron spectroscopy (XPS) technique was carried out in order to characterize the change in valence state and composite characteristic by shifted peaks of binding energies. The photocatalytic activity was studied through the degradation of Rhodamine B in aqueous solution under visible light exposure. The highest photocatalytic efficiency of CeO{sub 2}/SiO{sub 2} composite was also obtained. To explain the high photocatalytic

Application of L1/2 regularization logistic method in heart disease diagnosis.

Science.gov (United States)

Zhang, Bowen; Chai, Hua; Yang, Ziyi; Liang, Yong; Chu, Gejin; Liu, Xiaoying

2014-01-01

Heart disease has become the number one killer of human health, and its diagnosis depends on many features, such as age, blood pressure, heart rate and other dozens of physiological indicators. Although there are so many risk factors, doctors usually diagnose the disease depending on their intuition and experience, which requires a lot of knowledge and experience for correct determination. To find the hidden medical information in the existing clinical data is a noticeable and powerful approach in the study of heart disease diagnosis. In this paper, sparse logistic regression method is introduced to detect the key risk factors using L(1/2) regularization on the real heart disease data. Experimental results show that the sparse logistic L(1/2) regularization method achieves fewer but informative key features than Lasso, SCAD, MCP and Elastic net regularization approaches. Simultaneously, the proposed method can cut down the computational complexity, save cost and time to undergo medical tests and checkups, reduce the number of attributes needed to be taken from patients.

Setup and maintenance of manufacturing quality in CO2 laser cutting

OpenAIRE

Thombansen, U.; Hermanns, T.; Stoyanov, S.

2014-01-01

Manufacturing of parts by laser cutting is widely accepted in industry. In the market there are systems which are highly focused on special applications such as robot based 3D cutting in the automotive industry but also all-round machines which cut a diverse set of sheet steels at a variety of thicknesses. Most of these machines use a melt based cutting process where the molten material is ejected by an assist gas. Quality of the laser cut part is determined by a dross free cut with minimal r...

Cutting weeds with a CO2 laser

DEFF Research Database (Denmark)

Heisel, T.; Schou, Jørgen; Christensen, S.

2001-01-01

Stems of Chenopodium album. and Sinapis arvensis. and leaves of Lolium perenne. were cut with a CO2 laser or with a pair of scissors. Treatments were carried out on greenhouse-grown pot plants at three different growth stages and at two heights. Plant dry matter was measured 2 to 5 weeks after...... treatment. The relationship between dry weight and laser energy was analysed using a non-linear dose-response regression model. The regression parameters differed significantly between the weed species. At all growth stages and heights S. arvensis was more difficult to cut with a CO2 laser than C. album....... When stems were cut below the meristems, 0.9 and 2.3 J mm(-1) of CO2 laser energy dose was sufficient to reduce by 90% the biomass of C. album and S. arvensis respectively. Regrowth appeared when dicotyledonous plant stems were cut above meristems, indicating that it is important to cut close...

Particle-specific toxicity and bioavailability of cerium oxide (CeO{sub 2}) nanoparticles to Arabidopsis thaliana

Energy Technology Data Exchange (ETDEWEB)

Yang, Xinping; Pan, Haopeng [College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing 210095 (China); Wang, Peng, E-mail: p.wang3@uq.edu.au [College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing 210095 (China); The University of Queensland, School of Agriculture and Food Sciences, St. Lucia, Queensland 4072 (Australia); Zhao, Fang-Jie [College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing 210095 (China); Rothamsted Research, Harpenden, Hertfordshire AL5 2JQ (United Kingdom)

2017-01-15

Highlights: • The phytotoxicity and uptake of CeO{sub 2} NPs were examined in Arabidopsis. • CeO{sub 2} NPs stimulated plant growth at low doses but were toxic at high doses. • The toxicity was due to the NPs per se, rather than from the dissolved Ce ions. • A similar up-translocation factor was found for CeO{sub 2} NPs, bulk CeO{sub 2} and Ce ions. - Abstract: The use of manufactured cerium oxide nanoparticles (CeO{sub 2}-NPs) in consumer products has increased markedly over the past decade, and their release into natural ecosystems is unavoidable. This study investigated the phytotoxicity and uptake of CeO{sub 2}-NPs in Arabidopsis thaliana grown in an agar medium. Although low concentrations of CeO{sub 2}-NPs had stimulatory effects on plant growth, at higher concentrations, CeO{sub 2}-NPs reduced growth and had adverse effects on the antioxidant systems and photosystem. Importantly, the toxicity resulted from the nanoparticles per se, rather than from the dissolved Ce ions. CeO{sub 2}-NPs were taken up and subsequently translocated to shoot tissues, and transmission electron microscopy (TEM) showed the presence of a large number of needle-like particle aggregations in the intercellular regions and the cytoplasm of leaf cells. The up-translocation factor to shoots was independent of the concentrations of Ce in the roots and the supplied forms of Ce (i.e. CeO{sub 2}-NPs, CeO{sub 2}-bulk, and ionic Ce), suggesting that endocytosis is likely to be a general mechanism responsible for the translocation of these Ce compounds. These findings provide important information regarding the toxicity and uptake of CeO{sub 2}-NPs in plants, which needs to be considered in environmental risk assessment for the safe use and disposal of CeO{sub 2}-NPs.

Effects of Nano-CeO2 with Different Nanocrystal Morphologies on Cytotoxicity in HepG2 Cells

Directory of Open Access Journals (Sweden)

Lili Wang

2015-09-01

Full Text Available Cerium oxide nanoparticles (nano-CeO2 have been reported to cause damage and apoptosis in human primary hepatocytes. Here, we compared the toxicity of three types of nano-CeO2 with different nanocrystal morphologies (cube-, octahedron-, and rod-like crystals in human hepatocellular carcinoma cells (HepG2. The cells were treated with the nano-CeO2 at various concentrations (6.25, 12.5, 25, 50, 100 μg/mL. The crystal structure, size and morphology of nano-CeO2 were investigated by X-ray diffractometry and transmission electron microscopy. The specific surface area was detected using the Brunauer, Emmet and Teller method. The cellular morphological and internal structure were observed by microscopy; apoptotic alterations were measured using flow cytometry; nuclear DNA, mitochondrial membrane potential (MMP, reactive oxygen species (ROS and glutathione (GSH in HepG2 cells were measured using high content screening technology. The scavenging ability of hydroxyl free radicals and the redox properties of the nano-CeO2 were measured by square-wave voltammetry and temperature-programmed-reduction methods. All three types of nano-CeO2 entered the HepG2 cells, localized in the lysosome and cytoplasm, altered cellular shape, and caused cytotoxicity. The nano-CeO2 with smaller specific surface areas induced more apoptosis, caused an increase in MMP, ROS and GSH, and lowered the cell’s ability to scavenge hydroxyl free radicals and antioxidants. In this work, our data demonstrated that compared with cube-like and octahedron-like nano-CeO2, the rod-like nano-CeO2 has lowest toxicity to HepG2 cells owing to its larger specific surface areas.

DAR, a new RhD variant involving exons 4, 5, and 7, often in linkage with ceAR, a new Rhce variant frequently found in African blacks

NARCIS (Netherlands)

M.B. Hemker (Mirte); P.C. Ligthart; L. Berger (Loïc); D.J. van Rhenen (Dirk Jan); C.E. van der Schoot (Ellen); P.A. Wijk

1999-01-01

textabstractThe highly polymorphic Rh system is encoded by 2 homologous genes RHD and RHCE. Gene rearrangements, deletions, or point mutations may cause partial D and CE antigens. In this study, a new RHD variant, DAR, and a new RHCE variant, ceAR, are described in 4

Assigning the Cerium Oxidation State for CH2CeF2 and OCeF2 Based on Multireference Wave Function Analysis.

Science.gov (United States)

Mooßen, Oliver; Dolg, Michael

2016-06-09

The geometric and electronic structure of the recently experimentally studied molecules ZCeF2 (Z = CH2, O) was investigated by density functional theory (DFT) and wave function-based ab initio methods. Special attention was paid to the Ce-Z metal-ligand bonding, especially to the nature of the interaction between the Ce 4f and the Z 2p orbitals and the possible multiconfigurational character arising from it, as well as to the assignment of an oxidation state of Ce reflecting the electronic structure. Complete active space self-consistent field (CASSCF) calculations were performed, followed by orbital rotations in the active orbital space. The methylene compound CH2CeF2 has an open-shell singlet ground state, which is characterized by a two-configurational wave function in the basis of the strongly mixed natural CASSCF orbitals. The system can also be described in a very compact way by the dominant Ce 4f(1) C 2p(1) configuration, if nearly pure Ce 4f and C 2p orbitals are used. In the basis of these localized orbitals, the molecule is almost monoconfigurational and should be best described as a Ce(III) system. The singlet ground state of the oxygen OCeF2 complex is of closed-shell character when a monoconfigurational wave function with very strongly mixed Ce 4f and O 2p CASSCF natural orbitals is used for the description. The transformation to orbitals localized on the cerium and oxygen atoms leads to a multiconfigurational wave function and reveals characteristics of a mixed valent Ce(IV)/Ce(III) compound. Additionally, the interactions of the localized active orbitals were analyzed by evaluating the expectation values of the charge fluctuation operator and the local spin operator. The Ce 4f and C 2p orbital interaction of the CH2CeF2 compound is weakly covalent and resembles the interaction of the H 1s orbitals in a stretched hydrogen dimer. In contrast, the interaction of the localized active orbitals for OCeF2 shows ionic character. Calculated vibrational Ce

Bulk modulus of CeO2 and PrO2-An experimental and theoretical study

International Nuclear Information System (INIS)

Gerward, L.; Staun Olsen, J.; Petit, L.; Vaitheeswaran, G.; Kanchana, V.; Svane, A.

2005-01-01

The high-pressure structural behaviour of CeO 2 and PrO 2 has been investigated by synchrotron X-ray diffraction at pressures up to 20 and 35 GPa, respectively. The experiments are accompanied by first principles calculations using the self-interaction corrected local spin density (SIC-LSD) approximation. The experimental values for the zero-pressure bulk modulus of CeO 2 and PrO 2 are 220(9) and 187(8) GPa, respectively. Our calculations reproduce the lattice constants with good accuracy, but find identical bulk modulii for CeO 2 (176.9 GPa) and PrO 2 (176.8 GPa)

Preparation of Mn doped CeO{sub 2} nanoparticles with enhanced ferromagnetism

Energy Technology Data Exchange (ETDEWEB)

Ravi, S., E-mail: sravi@mepcoeng.ac.in; Winfred Shashikanth, F.

2017-06-15

Spherical-like CeO{sub 2} and Mn-doped CeO{sub 2} using 6-aminohexanoic acid as surfactant exhibit enhanced ferromagnetism. The optical absorption spectra reveal a red shift with a band gap of 2.51 eV. The mechanics of ferromagnetism and the red shift were analyzed. These results provide a promising platform for developing a dilute magnetic semiconductor in spintronics. - Highlights: • Pure and Mn-doped CeO{sub 2} is prepared with aminohexanoic acid as capping. • They exhibit wide optical absorption with red-shift in their band gap. • Mn-doped CeO{sub 2} nanoparticle exhibit hysteresis at room temperature. • Results were promising to use in spintronics and opto-electronics field.

Resonant photoemission study of CeRu4Sb12

International Nuclear Information System (INIS)

Ishii, Hiroyoshi; Miyahara, Tsuneaki; Takayama, Yasuhiro; Shiozawa, Hidetsugu; Obu, Kenji; Matsuda, Tatsuma D.; Aoki, Yuji; Sugawara, Hitoshi; Sato, Hideyuki

2005-01-01

We have measured the Ce 4d-4f and Ce 3d-4f resonant photoemission spectra of CeRu 4 Sb 12 . The Ce 4f spectra show the spectral features corresponding to a weakly hybridized system. The number of 4f electrons is estimated to be ∼1.0

Evaluation of critical distances for energy transfer between Pr{sup 3+} and Ce{sup 3+} in yttrium aluminium garnet

Energy Technology Data Exchange (ETDEWEB)

Zeng, Peng; Wei, Xiantao; Yin, Min; Chen, Yonghu, E-mail: yhuchen@ustc.edu.cn [Key Laboratory of Strongly-Coupled Quantum Matter Physics, Chinese Academy of Sciences, School of Physical Sciences, University of Science and Technology of China, No. 96 Jinzhai Road, Hefei, Anhui 230026 (China); Zhou, Shaoshuai [Key Laboratory of Strongly-Coupled Quantum Matter Physics, Chinese Academy of Sciences, School of Physical Sciences, University of Science and Technology of China, No. 96 Jinzhai Road, Hefei, Anhui 230026 (China); Department of Physics, Qufu Normal University, Qufu, Shandong 273165 (China)

2016-09-07

A series of Pr{sup 3+}/Ce{sup 3+} doped yttrium aluminium garnet (Y{sub 3}Al{sub 5}O{sub 12} or simply YAG) phosphors were synthesized to investigate the energy transfer between Pr{sup 3+} and Ce{sup 3+} for their potential application in a white light-emitting diode and quantum information storage and processing. The excitation and emission spectra of YAG:Pr{sup 3+}/Ce{sup 3+} were measured and analyzed, and it revealed that the reabsorption between Pr{sup 3+} and Ce{sup 3+} was so weak that it can be ignored, and the energy transfer from Pr{sup 3+} (5d) to Ce{sup 3+} (5d) and Ce{sup 3+} (5d) to Pr{sup 3+} ({sup 1}D{sub 2}) did occur. By analyzing the excitation and the emission spectra, the energy transfer from Pr{sup 3+} (5d) to Ce{sup 3+} (5d) and Ce{sup 3+} (5d) to Pr{sup 3+} ({sup 1}D{sub 2}) was examined in detail with an original strategy deduced from fluorescence dynamics and the Dexter energy transfer theory, and the critical distances of energy transfer were derived to be 7.9 Å and 4.0 Å for Pr{sup 3+} (5d) to Ce{sup 3+} (5d) and Ce{sup 3+} (5d) to Pr{sup 3+} ({sup 1}D{sub 2}), respectively. The energy transfer rates of the two processes of various concentrations were discussed and evaluated. Furthermore, for the purpose of sensing a single Pr{sup 3+} state with a Ce{sup 3+} ion, the optimal distance of Ce{sup 3+} from Pr{sup 3+} was evaluated as 5.60 Å, where the probability of success reaches its maximum value of 78.66%, and meanwhile the probabilities were evaluated for a series of Y{sup 3+} sites in a YAG lattice. These results will be of valuable reference for achievement of the optimal energy transfer efficiency in Pr{sup 3+}/Ce{sup 3+} doped YAG and other similar systems.

Photoabsorption by the 3d shell in Ce, Pr, Ho, and Er: Observations and calculations

International Nuclear Information System (INIS)

Sugar, J.; Brewer, W.D.; Kalkowski, G.; Kaindl, G.; Paparazzo, E.

1985-01-01

Improved 3d photoabsorption spectra of the series of rare-earth fluorides have been obtained by recording total electron yield and using monochromatized synchrotron radiation. They are compared with predicted spectra resulting from an average-of-configuration calculation of wave functions employing radial integrals adjusted to the observed spectrum in each case; results are presented here for Ce, Pr, Ho, and Er spectra. Improved resolution of the Ce spectrum permitted for the first time a determination of the proper scaling for all of the electrostatic parameters

Reaction /sup 140/Ce (e, e'p), (2)

Energy Technology Data Exchange (ETDEWEB)

Saito, T; Shoda, K [Tohoku Univ., Sendai (Japan). Lab. of Nuclear Science

1975-06-01

An experiment was carried out to study the character of the resonance observed at 24.4 MeV in the /sup 140/Ce (..gamma.., p) /sup 139/La reaction. The (..gamma.., p/sub 0/ + p/sub 1/) cross section was measured at the angles of 54.7/sup 0/ and 125.3/sup 0/, at which the angle-dependent term of E1 becomes zero, for the energy range between 19 and 26 MeV. Existence of a peak due to the E2 resonance around 24.4 MeV was examined. The energy of incident electrons from a linear accelerator was changed between 20 and 26.7 MeV. The target was a Ce foil of 7.3 mg/cm/sup 2/ thick. The proton spectra due to the /sup 140/Ce (e, e' p) /sup 139/La reaction were measured with a broad range magnetic spectrometer. In the determined spectra of /sup 140/Ce (..gamma.., p/sub 0/+p/sub 1/) /sup 139/La, any remarkable peak, except one at 20.5 MeV, was not seen. From the observed spectra, the total cross section and the asymmetry factor due to interference were obtained as functions of energy. The values of the asymmetry factor were almost flat in the energy range between 19 and 26 MeV. The resonance at 24.4 MeV in the total cross section may be due to the E1 resonance, and is not due to the E2.

Structure and properties of PbO2-CeO2 anodes on stainless steel

International Nuclear Information System (INIS)

Song, Yuehai; Wei, Gang; Xiong, Rongchun

2007-01-01

The lack of ideal anodes with excellent activity and stability is one of the critical problems in electrochemical oxidation for organic wastewater treatment. It is reported in this paper that the PbO 2 -CeO 2 films electrodeposited on stainless steel were used as catalytic electrodes for treating antibiotic wastewater. The PbO 2 -CeO 2 films on stainless steel were proved to be high stability, good activity and relatively low cost. Because of these properties, the films are more attractive than any other electrocatalytic materials among conventional dimensionally stable anodes (DSA). Experimental results showed that the PbO 2 -CeO 2 electrode has a service life of 1100 h in 3 M H 2 SO 4 solution under a current density of 1 A cm -2 at 35 o C, compared with 300 h for PbO 2 under the same conditions. The X-ray diffraction (XRD) patterns and SEM images indicated that the PbO 2 -CeO 2 films on stainless steel have a dense structure and the preferred crystalline orientation on the substrate surface was changed. Color and chemical oxygen demand (COD) of antibiotics wastewater were studied by electrolysis by using these electrodes as anode and stainless steel as cathode. The results indicated that the anodes have excellent activity in antibiotic wastewater treatment. The PbO 2 -CeO 2 electrodes have high chemical stability which contributed by the superstable nature of the electrode, dense microstructure, good conductivity and the improvement of bonding with the stainless steel during electrodeposition

Nutrient analysis of the Beef Alternative Merchandising cuts.

Science.gov (United States)

Desimone, T L; Acheson, R A; Woerner, D R; Engle, T E; Douglass, L W; Belk, K E

2013-03-01

The objective of this study was to generate raw and cooked nutrient composition data to identify Quality Grade differences in proximate values for eight Beef Alternative Merchandising (BAM) cuts. The data generated will be used to update the nutrient data in the USDA National Nutrient Database for Standard Reference (SR). Beef Rib, Oven-Prepared, Beef Loin, Strip Loin, and Beef Loin, Top Sirloin Butt subprimals were collected from a total of 24 carcasses from four packing plants. The carcasses were a combination of USDA Yield Grades 2 (n=12) and 3 (n=12), USDA Quality Grades upper two-thirds Choice (n=8), low Choice (n=8), and Select (n=8), and two genders, steer (n=16) and heifer (n=8). After aging, subprimals were fabricated into the BAM cuts, dissected, and nutrient analysis was performed. Sample homogenates from each animal were homogenized and composited for analysis of the following: proximate analysis, long chain and trans-fatty acids, conjugated linoleic acid, total cholesterol, vitamin B-12, and selenium. This study identified seven BAM cuts from all three Quality Grades that qualify for USDA Lean; seven Select cuts that qualify for USDA Extra Lean; and three Select cuts that qualify for the American Heart Association's Heart Healthy Check. Copyright © 2012 Elsevier Ltd. All rights reserved.

Phase Composition and Long-Term Conductivity of Acceptor Doped Ce(PO₃)₄ and CeP₂O₇ with Variable P/Metal Ratio and of CeP₂O₇-KH₂PO₄ Composite

DEFF Research Database (Denmark)

Chatzichristodoulou, Christodoulos; Hallinder, Jonathan; Lapina, Alberto

2013-01-01

The thermal evolution of the phase composition of CeP2O7 and Ce(PO3)4 with 10 mol% Y and Gd doping, respectively, was examined by in-situ powder X-ray diffraction and thermogravimetry with in-line mass spectroscopy. The phase composition depends critically on the P to metal ratio, the annealing...... temperature, humidity and time. CeP2O7 and Ce(PO3)4 were completely decomposed to CePO4 following a 1100 h long conductivity test at 155°C. The conductivity of 10 mol% Gd doped Ce(PO3)4 (synthesized with P:(Ce + Gd) = 5.0) reaches a value of 6.4·10−2 S·cm−1 at 150°C under wet conditions (pH2O = 0.2 atm...

Electron paramagnetic resonance study of Ce doped partially stabilized ZrO2 crystals

Directory of Open Access Journals (Sweden)

Mikhail А. Borik

2017-09-01

Full Text Available ZrO2 (PSZ solid solutions crystals stabilized with yttrium and cerium oxides have been studied using electron paramagnetic resonance (EPR in the X and Q ranges. Zr3+ have been observed centers in the as-annealed ZrO2 crystals stabilized only by yttrium oxide (2.8 mol% Y2O3. Another type of paramagnetic-O-centers appear as a result of CeO2 addition to ZrO2 crystals along with yttrium oxide. To estimate the concentration of Ce3+ ions in PZS crystals, we recorded the EPR spectra in the presence of a reference at 7 K. Paramagnetic Ce3+ ions have been identified and their relative amount in the PSZ crystals before and after high-temperature heat treatment has been assessed. Annealing in air leads decreases the concentration of Ce3+ ions for all the test compositions and changes the color of the crystals from red to white. After annealing of the sample 2.0Y0.8Ce3Zr, the amount of paramagnetic Ce3+ ions decreased approximately twofold. Paramagnetic centers from Ce3+ have not been detected in the specimen with a low cerium content of 0.1 mol% after annealing which indicates the complete transition of Ce3+ to the Ce4+ state. We show that the forming cerium paramagnetic centers are bound by strong exchange interactions. No angular dependence of the EPR lines of the paramagnetic Ce3+ cations on the applied external magnetic field has been observed. Probable origin of the absence of angular dependence is that the impurity rare-earth ions are located close to one another, forming impurity clusters with an effective spin of Seff=1/2.

Irradiation effects in UO2 and CeO2

International Nuclear Information System (INIS)

Ye, Bei; Oaks, Aaron; Kirk, Mark; Yun, Di; Chen, Wei-Ying; Holtzman, Benjamin; Stubbins, James F.

2013-01-01

Single crystal CeO 2 , as a surrogate material to UO 2 , was irradiated with 500 keV xenon ions at 800 °C while being observed using in situ transmission electron microscopy (TEM). Experimental results show the formation and growth of defect clusters including dislocation loops and cavities as a function of increasing atomic displacement dose. At high dose, the dislocation loop structure evolves into an extended dislocation line structure, which appears to remain stable to the high dose levels examined in this study. A high concentration of cavities was also present in the microstructure. Despite high atomic displacement doses, the specimen remained crystalline to a cumulated dose of 5 × 10 15 ions/cm 2 , which is consistent with the known stability of the fluorite structure under high dose irradiation. Kinetic Monte Carlo calculations show that oxygen mobility is substantially higher in hypo-stoichiometric UO 2 /CeO 2 than hyper-stoichiometric systems. This result is consistent with the ability of irradiation damage to recover even at intermediate irradiation temperatures

Supraconductivity of TR-Ru3Si2 compounds (TR = La, Ce)

International Nuclear Information System (INIS)

Godart, C.; Gupta, L.C.; Parks, R.D.; Rauschwalbe, U.; Alheim, U.; Gottwick, U.; Lieke, W.; Steglich, F.

1984-01-01

A new family of superconducting ternary silicides MRu 3 Si 2 with M = La (Tsub(s) approximately 7 K), Y and Th was discovered by Barz and Vandenberg. Same compounds with M from Nd to Tm are magnetic and not superconductors. We studied superconductivity in the solid solution Cesub(1-x)Lasub(x)Ru 3 Si 2 of hexagonal structure from x = 0 to 1. CeRu 3 Si 2 is type II superconductor (Tsub(s) approximately 1 K), like LaRu 3 Si 2 , and is mixed valent (M.V.). Spin fluctuations temperature (Tsub(sf) approximately 440 K) is between these of non superconducting M.V. like CeSn 3 (Tsub(sf) approximately 270) and these of superconducting M.V. like CeRu 2 (Tsub(sf) approximately 770 K). Cesub(1-x)Lasub(x)Ru 3 Si 2 is the first M.V. system of Ce which is superconductor from x = 0 to 1 [fr

Protect Your Heart: Check Food Labels to Make Heart-Healthy Choices

Science.gov (United States)

... Protein 15g Total Amounts To make heart-healthy food choices, look at the totals and cut back on • ... Toolkit No. 8: Protect Your Heart: Make Smart Food Choices • Toolkit No. 9: Protect Your Heart: Choose Fats ...

Optimization of Cutting Parameters of the Haynes 718 Nickel Alloy With Gas CO2 Laser

Directory of Open Access Journals (Sweden)

Jana PETRŮ

2011-06-01

Full Text Available This article deals with the application of laser technology and the optimization of parameters in the area of nickel alloy laser cutting intended for application in the aircraft industry. The main goal is to outline possibilities of use of the laser technology, primarily its application in the area of 3D material cutting. This experiment is focused on the optimization of cutting parameters of the Haynes 718 alloy with a gas CO2 laser. Originating cuts are evaluated primarily from the point of view of cut quality and accompanying undesirable phenomena occurring in the process of cutting. In conclusion the results achieved in the metallographic laboratory are described and analyzed.

Magnetic properties of nearly stoichiometric CeAuBi2 heavy fermion compound

International Nuclear Information System (INIS)

Adriano, C.; Jesus, C. B. R.; Pagliuso, P. G.; Rosa, P. F. S.; Grant, T.; Fisk, Z.; Garcia, D. J.

2015-01-01

Motivated by the interesting magnetic anisotropy found in the heavy fermion family CeTX 2 (T = transition metal and X = pnictogen), here, we study the novel parent compound CeAu 1−x Bi 2−y by combining magnetization, pressure dependent electrical resistivity, and heat-capacity measurements. The magnetic properties of our nearly stoichiometric single crystal sample of CeAu 1−x Bi 2−y (x = 0.92 and y = 1.6) revealed an antiferromagnetic ordering at T N  = 12 K with an easy axis along the c-direction. The field dependent magnetization data at low temperatures reveal the existence of a spin-flop transition when the field is applied along the c-axis (H c  ∼ 7.5 T and T = 5 K). The heat capacity and pressure dependent resistivity data suggest that CeAu 0.92 Bi 1.6 exhibits a weak heavy fermion behavior with strongly localized Ce 3+ 4f electrons. Furthermore, the systematic analysis using a mean field model including anisotropic nearest-neighbors interactions and the tetragonal crystalline electric field (CEF) Hamiltonian allows us to extract a CEF scheme and two different values for the anisotropic J RKKY exchange parameters between the Ce 3+ ions in this compound. Thus, we discuss a scenario, considering both the anisotropic magnetic interactions and the tetragonal CEF effects, in the CeAu 1−x Bi 2−y compounds, and we compare our results with the isostructural compound CeCuBi 2

Excitation light source dependence of emission in Sn2+-Ce3+ codoped ZnO-P2O5 glasses

OpenAIRE

Masai, Hirokazu; Hino, Yusuke; Yanagida, Takayuki; Fujimoto, Yutaka; Fukuda, Kentaro; Yoko, Toshinobu

2013-01-01

Correlation between excitation light source and the emission property of Sn^{2+}-Ce^{3+} co-doped zinc phosphate glasses is examined. Although photoluminescence (PL) peaks of both Sn^{2+}and Ce^{3+} shifted with increasing amount of Ce^{3+}, there was little energy resonance between Sn^{2+} and Ce^{3+} emission centers. On the other hand, radioluminescence (RL) spectra excited by X-ray was independent of the Ce concentration, indicating that emission was mainly observed from Sn^{2+} emission ...

Leczenie astmy wziewnymi glikokortykosteroidami i długo działającymi β2-agonistami – leczenie podtrzymujące i doraźne

Directory of Open Access Journals (Sweden)

Iwona Grzelewska-Rzymowska

2014-03-01

Full Text Available Autorzy przedstawiają niektóre problemy dotyczące wziewnego leczenia astmy kombinacją wziewnych glikokortykosteroidów (wGKS i długo działających β2-agonistów (LAβA, określanego jako leczenie podtrzymujące i doraźne (LPiD. Od 2006 roku międzynarodowe zalecenia dotyczące terapii astmy i jej zapobiegania (GINA – Globalna Inicjatywa dla Astmy rekomendują małe dawki wGKS jako pierwszą linię leczenia chorych na łagodną, przewlekłą astmę (drugi stopień leczenia i średnie dawki wGKS lub kombinację wGKS z LAβA jako preferowane leczenie astmy umiarkowanej (trzeci stopień leczenia. Wziewne glikokortykosteroidy stanowią główne leki w astmie, ponieważ są skuteczne w kontrolowaniu objawów choroby i wskaźników spirometrycznych. Salmeterol i formoterol (LAβA wywierają przede wszystkim działanie rozszerzające oskrzela, które utrzymuje się ponad 12 godzin. Ta grupa leków jest bardzo ważna w leczeniu astmy, pozwala bowiem na zmniejszenie dawki wGKS. Fundamentalną cechą astmy jest zapalenie, które dotyczy dużych i małych dróg oddechowych (o średnicy mniejszej niż 2 mm. Zajęcie małych oskrzeli jest powiązane z ciężkością choroby. W badaniach epidemiologicznych wykazano, że astma nie jest dostatecznie kontrolowana nie tylko w badaniach klinicznych, ale również w real-life. Nowy model terapii astmy, wykorzystujący budezonid oraz formoterol, określony jako leczenie podtrzymujące i doraźne, okazał się skuteczny i dobrze tolerowany. Poprawiał podatność pacjentów na terapię, zmniejszał ryzyko jej przerwania i poprawiał kliniczny przebieg astmy. Technologia Modulate pozwoliła na zmniejszenie cząstek dwupropionianu beklometazonu i formoterolu (BDP/F w połączeniu, co umożliwiło uzyskanie homogennego rozkładu cząstek leku w całym drzewie oskrzelowym. Ostatnio ta superdrobnocząstkowa formulacja BDP/F była oceniana u chorych na astmę według modelu LPiD. Wykazano, że leczenie kombinacj

CO2 methanation on the catalyst of Ni/MCM-41 promoted with CeO2.

Science.gov (United States)

Wang, Xiaoliu; Zhu, Lingjun; Liu, Yincong; Wang, Shurong

2018-06-01

CO 2 as a raw feed combined with renewable hydrogen for the production of useful chemicals and alternative energy products is one of the solutions to environmental and energy problems. In this study, a series of Ni-xCeO 2 /MCM-41 catalysts with a nickel content of 20wt% were prepared through deposition precipitation method for CO 2 methanation. Different characterization methods, including BET, XRD, TEM, SEM, H 2 -TPR and H 2 -TPD were applied to help explore the influence mechanism of CeO 2 on Ni/MCM-41 in CO 2 methanation. It was found that all CeO 2 -promoted catalysts exhibited enhanced catalytic activity when compared to Ni/MCM-41. The catalyst modified with 20wt% CeO 2 showed the best catalytic performance, with CO 2 conversion and CH 4 selectivity of 85.6% and 99.8%, respectively, at the temperature of 380°C under atmospheric pressure. The synergetic effects among Ni 0 active sites, the promoter and the support, including nickel dispersion improvement and increased CO 2 adsorption sites due to the addition of CeO 2 , were considered as important factors for high reactivity of the promoted catalysts. The stability test showed that the promoted catalyst maintained its high reactivity after 30h. Copyright © 2017 Elsevier B.V. All rights reserved.

Enhancement of room temperature ferromagnetic behavior of rf sputtered Ni-CeO_2 thin films

International Nuclear Information System (INIS)

Murugan, R.; Vijayaprasath, G.; Mahalingam, T.; Ravi, G.

2016-01-01

Highlights: • Ni-CeO_2 thin films deposited by using rf Magnetron sputtering with different concentrations of Ni. • Deposited thin films have single crystalline and uniform surface morphology. • Photoluminescence and micro-Raman spectra were interpreted for Ni-CeO_2 thin films. • XPS spectra confirmed Ni ions were present in the doped CeO_2 thin films. • Ni ions induced ferromagnetic behavior of Ni-CeO_2 films were confirmed through VSM. - Abstract: Ni-doped CeO_2 thin films were prepared under Ar"+ atmosphere on glass substrates using rf magnetron sputtering. To assess the properties of the prepared thin films, the influence of various amounts of Ni dopant on structural, morphological, optical, vibrational, compositional and magnetic properties of the CeO_2 films were studied by using X-Ray diffraction (XRD), atomic force microscope (AFM), photoluminescence (PL), micro-Raman, X-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometer (VSM). XRD patterns for all the samples revealed the expected CeO_2 cubic fluorite-type structure and Ni ions were uniformly distributed in the samples. AFM images of the prepared samples indicate high dense, columnar structure with uniform distribution of CeO_2. Room-temperature photoluminescence (PL) and micro-Raman spectroscopic studies revealed an increase of oxygen vacancies with higher concentration of Ni in CeO_2. XPS results confirm the presence of Ni_2_p, O_1_s and Ce and depict that cerium is present as both Ce"4"+ and Ce"3"+ oxidation states in Ce_1_−_xNi_xO_2 (x = 15%) thin film. Field dependent magnetization measurements revealed a paramagnetic behavior for pure CeO_2, while a ferromagnetic behavior appeared when Ni is doped in CeO_2 films. Doping dependent magnetization measurements suggest that the observed ferromagnetism is due to the presence of metallic Ni clusters with nanometric size and broad size distribution.

Sintering Studies of Ga-Doped CeO2 (Ga-Doped PuO2 Surrogate) for Mixed Oxide Nuclear Fuel

International Nuclear Information System (INIS)

Haertling, C.; Huling, J.; Park, Y.S.

1999-01-01

Sintering studies of CeO 2 and CeO 2 + 2 wt. % Ga 2 O 3 were completed. Firing temperatures studied were 1250-1650 C with 2 to 4 hour firing soak times in air. Powders fabricated by three methods (as-received, attrition-mill and nitrite-derived) were studied. Attrition-milled CeO 2 improved densities as compared with as-received CeO 2 . Attrition-milled CeO 2 with 2 wt.% Ga 2 O 3 showed decreased densities with increasing temperatures. As-received CeO 2 with 2 wt.% Ga 2 O 3 showed a opposite trend, increasing in density with increased firing temperature. Two pellet preparation methods were studied, a one-step-press method and a two-step-press method. The two-step-press method showed greater densities at lower firing temperatures and times as compared with the one-step-press method, however for CeO 2 + 2 wt.% Ga 2 O 3 , the two methods gave equivalent results at 1650 C, 6 hr. firing conditions

Synthesis and physico-chemical characterization of CeO2/ZrO2-SO42- mixed oxides

International Nuclear Information System (INIS)

Hernandez E, J. M.; Silva R, R.; Garcia A, R.; Garcia S, L. A.; Handy, B. E.; Cardenas G, G.; Cueto H, A.

2012-01-01

Environmentally friendly solid-acid catalysts CeO 2 /ZrO 2 -SO 4 2- were prepared by the sol gel method varying CeO 2 content (10, 20 and 30 wt %) and using sulfation in situ, maintaining the sulfate ions amount present in the materials at 20 wt %. ZrO 2 and ZrO 2 -SO 4 2- were also prepared for comparison proposes using the same synthesis method. The materials were characterized by X-ray diffraction, nitrogen physisorption, potentiometric titration with n-butylamine, decomposition of 2-propanol and n-pentane isomerization. The specific surface area of ZrO 2 -SO 4 2- was high (160 m 2 /g) compared with the unmodified ZrO 2 (80 m 2 /g), however this area decreased with increasing the CeO 2 content (37-100 m 2 /g). There was no significant effect of CeO 2 on the tetragonal structure of ZrO 2 -SO 4 2- . The variation of acid sites amount runs parallel to the change of specific surface area. The acid sites amount decreased with increasing cerium oxide content. The decomposition of 2-propanol results fundamentally in the formation of dehydration products such as propylene and diisopropyl ether, both involving acid sites. In addition, a good performance during the n-pentane isomerization was observed for these materials. The selectivity towards isopentane reaches 84% when the Pt/CeO 2 /ZrO 2 -SO 4 2- catalyst with the highest CeO 2 content was used. (Author)

Incineration of a Commercial Coating with Nano CeO2

Science.gov (United States)

Le Bihan, Olivier; Ounoughene, Ghania; Meunier, Laurent; Debray, Bruno; Aguerre-Chariol, Olivier

2017-06-01

The potential environmental risk arising from the incineration of waste containing nanomaterials is a new field which deserves further attention. Some recent studies have begun to focus on this topic but the data are incomplete. In addition, there is a need to consider real life waste. The present study gives some insight into the fate and behavior of a commercial coating containing a commercial additive (7% w/w) based on nano-CeO2 (aggregates of 10 to 40 nm, with elemental particles of 2-3 nm). The tests have been conducted with a system developed in the frame of the NanoFlueGas project. The test protocol was designed to respect the regulatory criteria of a good combustion in incineration plants (temperature around 850°C, highly ventilated combustion, at least 2 s residence time for the combustion gas in a post-combustion chamber at 850°C, and high oxygen/fuel contact). Time tracking by electric low pressure impaction (ELPI) shows that the incineration produces aerosol with number concentration dominated by sub-100 nm particles. Cerium is observed by TEM and EDS analysis but as a minor compound of a sub-group of particles. No nanoCeO2 particles have been observed in the aerosol. ICP-MS analysis indicates that the residual material consists mainly of CeO2 (60% of the mass). Observation by TEM establishes that this material is in the form of aggregates with individual particle of 40-200 nm and suggests that sintering occurred during incineration. As a conclusion, the lab scale incineration study led mainly to the release of nano-CeO2 in the residual material, as the major component. Its size distribution is different than the one of the nano-CeO2 observed in the initial sample before incineration. Additional research is needed to improve the understanding of nanoCeO2 behavior, and to integrate experiments at lab and real scale.

Design of high quality doped CeO2 solid electrolytes with nanohetero structure

International Nuclear Information System (INIS)

Mori, T.; Ou, D.R.; Ye, F.; Drennan, J.

2006-01-01

Doped cerium (CeO 2 ) compounds are fluorite related oxides which show oxide ionic conductivity higher than yttria-stabilized zirconia in oxidizing atmosphere. As a consequence of this, a considerable interest has been shown in application of these materials for low (400-650 o C) temperature operation of solid oxide fuel cells (SOFCs). In this paper, our experimental data about the influence of microstructure at the atomic level on electrochemical properties were reviewed in order to develop high quality doped CeO 2 electrolytes in fuel cell applications. Using this data in the present paper, our original idea for a design of nanodomain structure in doped CeO 2 electrolytes was suggested. The nanosized powders and dense sintered bodies of M doped CeO 2 (M:Sm,Gd,La,Y,Yb, and Dy) compounds were fabricated. Also nanostructural features in these specimens were introduced for conclusion of relationship between electrolytic properties and domain structure in doped CeO 2 . It is essential that the electrolytic properties in doped CeO 2 solid electrolytes reflect in changes of microstructure even down to the atomic scale. Accordingly, a combined approach of nanostructure fabrication, electrical measurement and structure characterization was required to develop superior quality doped CeO 2 electrolytes in the fuel cells. (author)

DAR, a new RhD variant involving exons 4, 5, and 7, often in linkage with ceAR, a new Rhce variant frequently found in African blacks

NARCIS (Netherlands)

Hemker, M. B.; Ligthart, P. C.; Berger, L.; van Rhenen, D. J.; van der Schoot, C. E.; Wijk, P. A.

1999-01-01

The highly polymorphic Rh system is encoded by 2 homologous genes RHD and RHCE. Gene rearrangements, deletions, or point mutations may cause partial D and CE antigens. In this study, a new RHD variant, DAR, and a new RHCE variant, ceAR, are described in 4 Dutch African Blacks. Serologically, DAR

Structure and photocatalytic activity studies of TiO2-supported over Ce-modified Al-MCM-41

International Nuclear Information System (INIS)

Krishna Reddy, Jakkidi; Durgakumari, Valluri; Subrahmanyam, Machiraju; Sreedhar, Bojja

2009-01-01

Ce-Al-MCM-41, TiO 2 /Al-MCM-41 and TiO 2 /Ce-Al-MCM-41 materials with varying contents of Ce (by impregnation) and TiO 2 loaded (by solid-state dispersion) on Al-MCM-41 support are prepared. The Ce modified and TiO 2 loaded composite systems are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectra (DRS) and X-ray photoelectron spectroscopy (XPS) techniques. The DRS and XPS of low Ce content (0.2-0.5 wt.%) modified Al-MCM-41 samples are showing more characteristic of Ce 3+ species wherein cerium in interaction with Al-MCM-41 and that of high Ce (0.8, 3.0 wt.%) content modified samples are showing the characteristic of both Ce 4+ and Ce 3+ species. A series of Ce-modified Al-MCM-41 and TiO 2 loaded composite catalysts are evaluated for photocatalytic degradation of phenol under UV irradiation. Low Ce content in Ce 3+ state on Al-MCM-41 is showing good photoactivity in comparison with high Ce content samples and pure ceria. The composite TiO 2 /Ce-Al-MCM-41 is showing enhanced degradation activity due decreased rate of electron-hole recombination on TiO 2 surface by the redox properties of cerium. The photocatalyst TiO 2 /Ce-Al-MCM-41 with an optimum of 10 wt.% TiO 2 and 0.3 wt.% Ce is showing maximum phenol degradation activity. The possible mechanism of phenol degradation on the composite photocatalyst is proposed.

Ce2O3-SO3-H2O system at 150 and 200 deg C

International Nuclear Information System (INIS)

Belokoskov, V.I.; Trofimov, G.V.; Govorukhina, O.A.

1978-01-01

The solubility, solid phase composition and crystal characteristics in the Ce 2 O 3 -SO 3 -H 2 O system have been studied in a broad range of sulfuric acid concentrations (25 to 80% SO 3 ) at temperatures from 150 to 200 deg C. It has been established that in the system the equilibrium had been reached after 15 to 20 days. At 150 deg C, Ce 2 (SO 4 ) 3 x2H 2 O, Ce 2 (SO 4 ) 3 xH 2 O sulfates and Ce 2 (SO 4 ) 3 x3H 2 SO 4 acid salt crystallize in the system. At 200 deg C, the same sulfates crystallize in the system, except that the bisaturation points of the system are shifted, with respect to 150 deg C, into the region of higher SO 3 concentration and correspond to solutions with a SO 3 concentration of 57.8 and 65%. The solubility of cerium(3) at 150 deg C is about 0.5% Ce 2 O 3 . An increase in temperature up to 200 deg C leads to a slightly higher solubility of cerium sulfates

Optical and structural properties of nanostructured CeO2:Tb3+ film

International Nuclear Information System (INIS)

Ansari, Anees A.; Singh, S.P.; Malhotra, B.D.

2011-01-01

Nanostructured CeO 2 :Tb 3+ film has been fabricated on glass substrate through sol-gel technique via dip-coating process. (NH 4 ) 2 Ce(NO 3 ) 6 , Tb(NO 3 ) 3 .6H 2 O, ethylene glycol have been used as precursors for sol preparation. X-ray diffraction (XRD), scanning electron microscopy (SEM), UV/VIS and photoluminescence (PL) spectral studies have been employed to analyze the structural and optical properties of the film. XRD pattern has been used to analyze the crystallite nature and calculated particle size by Scherrer equation of nanostructured CeO 2 :Tb 3+ film, found in the range 3-4 nm. SEM image has been observed to analyze the surface topography of the film which is well porous, highly agglomerated and uniformly distributed nanoparticles on the film surface. Optical band gap of nanostructured CeO 2 :Tb 3+ film has been estimated as 3.57 eV. A significant enhancement in band shape of CeO 2 :Tb 3+ spectrum has been observed in PL spectra, showed their promising usages as optical materials in optoelectronic devices.

Microstructure and corrosion resistance of Ni-based alloy laser coatings with nanosize CeO2 addition

Science.gov (United States)

Zhang, Shi Hong; Li, Ming Xi; Yoon, Jae Hong; Cho, Tong Yul; Zhu He, Yi; Lee, Chan Gyu

2008-07-01

Micron-size Ni-base alloy (NBA) powders were mixed with both 1.5 wt.% (hereinafter %) micron-size CeO2 (m-CeO2) and also 1.5% and 3.0% nano-size CeO2 (n- CeO2) powders. These mixtures were coated on low-carbon steel (Q235) by 2.0 kW CO2 laser cladding. The effects on the microstructures, phases and electrochemical corrosion of the coatings upon the addition of m- and n- CeO2 powders to NBA (m- and n- CeO2 /NBA) have been investigated. The results showed that a smooth coating was prepared under suitable processing parameters (P= 2.0 kW, V= 180 mm min- 1) by adding 1.5% n- CeO2. In addition to the primary phases of γ-Ni, Cr23 C6 and Ni3 B in the Ni-base alloy coating, CeNi3 was formed in Ni-base alloy coatings with both n- CeO2 and m-CeO2 particles, and CeNi5 appeared in the coating upon decreasing the size of CeO2 particles. Well-developed dendrites were observed in the Ni-base alloy coating; directional dendrites grew at the interface in the coating upon the addition of m-CeO2, whereas fine and multioriented dendrites grew upon decreasing the size of CeO2 particles to the nanoscale. Actinomorphic dendrites and compact equiaxed dendrites grew from the interface to near the surface upon increasing the content of n- CeO2 from 1.5 to 3.0%. In strongly acidic HNO3 solution, the severe corrosion of dendrites occurred and there were many corrosion pits in the Ni-base alloy coating; intercrystalline corrosion also has a dominant role upon the addition of m-CeO2, whereas uniform corrosion occurs in the coating as the size of CeO2 particles is decreased to nanoscale.

Microstructure and corrosion resistance of Ni-based alloy laser coatings with nanosize CeO2 addition

Directory of Open Access Journals (Sweden)

Shi Hong Zhang et al

2008-01-01

Full Text Available Micron-size Ni-base alloy (NBA powders were mixed with both 1.5 wt.% (hereinafter % micron-size CeO2 (m-CeO2 and also 1.5% and 3.0% nano-size CeO2 (n- CeO2 powders. These mixtures were coated on low-carbon steel (Q235 by 2.0 kW CO2 laser cladding. The effects on the microstructures, phases and electrochemical corrosion of the coatings upon the addition of m- and n- CeO2 powders to NBA (m- and n- CeO2 /NBA have been investigated. The results showed that a smooth coating was prepared under suitable processing parameters (P= 2.0 kW, V= 180 mm min- 1 by adding 1.5% n- CeO2. In addition to the primary phases of γ-Ni, Cr23 C6 and Ni3 B in the Ni-base alloy coating, CeNi3 was formed in Ni-base alloy coatings with both n- CeO2 and m-CeO2 particles, and CeNi5 appeared in the coating upon decreasing the size of CeO2 particles. Well-developed dendrites were observed in the Ni-base alloy coating; directional dendrites grew at the interface in the coating upon the addition of m-CeO2, whereas fine and multioriented dendrites grew upon decreasing the size of CeO2 particles to the nanoscale. Actinomorphic dendrites and compact equiaxed dendrites grew from the interface to near the surface upon increasing the content of n- CeO2 from 1.5 to 3.0%. In strongly acidic HNO3 solution, the severe corrosion of dendrites occurred and there were many corrosion pits in the Ni-base alloy coating; intercrystalline corrosion also has a dominant role upon the addition of m-CeO2, whereas uniform corrosion occurs in the coating as the size of CeO2 particles is decreased to nanoscale.

Ruthenium nanoparticles supported on CeO2 for catalytic permanganate oxidation of butylparaben.

Science.gov (United States)

Zhang, Jing; Sun, Bo; Guan, Xiaohong; Wang, Hui; Bao, Hongliang; Huang, Yuying; Qiao, Junlian; Zhou, Gongming

2013-11-19

This study developed a heterogeneous catalytic permanganate oxidation system with ceria supported ruthenium, Ru/CeO2 (0.8‰ as Ru), as catalyst for the first time. The catalytic performance of Ru/CeO2 toward butylparaben (BP) oxidation by permanganate was strongly dependent on its dosage, pH, permanganate concentration and temperature. The presence of 1.0 g L(-1) Ru/CeO2 increased the oxidation rate of BP by permanganate at pH 4.0-8.0 by 3-96 times. The increase in Ru/CeO2 dosage led to a progressive enhancement in the oxidation rate of BP by permanganate at neutral pH. The XANES analysis revealed that (1) Ru was deposited on the surface of CeO2 as Ru(III); (2) Ru(III) was oxidized by permanganate to its higher oxidation state Ru(VI) and Ru(VII), which acted as the co-oxidants in BP oxidation; (3) Ru(VI) and Ru(VII) were reduced by BP to its initial state of Ru(III). Therefore, Ru/CeO2 acted as an electron shuttle in catalytic permanganate oxidation process. LC-MS/MS analysis implied that BP was initially attacked by permanganate or Ru(VI) and Ru(VII) at the aromatic ring, leading to the formation of various hydroxyl-substituted and ring-opening products. Ru/CeO2 could maintain its catalytic activity during the six successive runs. In conclusion, catalyzing permanganate oxidation with Ru/CeO2 is a promising technology for degrading phenolic pollutants in water treatment.

3D force control for robotic-assisted beating heart surgery based on viscoelastic tissue model.

Science.gov (United States)

Liu, Chao; Moreira, Pedro; Zemiti, Nabil; Poignet, Philippe

2011-01-01

Current cardiac surgery faces the challenging problem of heart beating motion even with the help of mechanical stabilizer which makes delicate operation on the heart surface difficult. Motion compensation methods for robotic-assisted beating heart surgery have been proposed recently in literature, but research on force control for such kind of surgery has hardly been reported. Moreover, the viscoelasticity property of the interaction between organ tissue and robotic instrument further complicates the force control design which is much easier in other applications by assuming the interaction model to be elastic (industry, stiff object manipulation, etc.). In this work, we present a three-dimensional force control method for robotic-assisted beating heart surgery taking into consideration of the viscoelastic interaction property. Performance studies based on our D2M2 robot and 3D heart beating motion information obtained through Da Vinci™ system are provided.