UMTRA Project environmental, health, and safety plan

International Nuclear Information System (INIS)

1989-02-01

The basic health and safety requirements established in this plan are designed to provide guidelines to be applied at all Uranium Mill Tailings Remedial Action (UMTRA) Project sites. Specific restrictions are given where necessary. However, an attempt has been made to provide guidelines which are generic in nature, and will allow for evaluation of site-specific conditions. Health and safety personnel are expected to exercise professional judgment when interpreting these guidelines to ensure the health and safety of project personnel and the general population. This UMTRA Project Environmental, Health, and Safety (EH ampersand S) Plan specifies the basic Federal health and safety standards and special DOE requirements applicable to this program. In addition, responsibilities in carrying out this plan are delineated. Some guidance on program requirements and radiation control and monitoring is also included. An Environmental, Health, and Safety Plan shall be developed as part of the remedial action plan for each mill site and associated disposal site. Special conditions at the site which may present potential health hazards will be described, and special areas that should should be addressed by the Remedial Action Contractor (RAC) will be indicated. Site-specific EH ampersand S concerns will be addressed by special contract conditions in RAC subcontracts. 2 tabs

Health Activities Project (HAP): Sight and Sound Module.

Science.gov (United States)

Buller, Dave; And Others

Contained within this Health Activities Project (HAP) learning packet are activities for children in grades 5-8. Design of the activities centers around the idea that students can control their own health and safety. Within this module are teacher and student folios describing six activities which involve students in restricting their vision by…

Experiences from three community health promotion projects in Greenland

DEFF Research Database (Denmark)

Curtis, Tine; Olesen, Ingelise; Kjeldsen, Ann B

2005-01-01

OBJECTIVES AND METHODS: Three community health promotion projects have been implemented in Greenland in the municipalities of Upernavik, Ittoqqortoormiit and Qasigiannguit. Based on project reports and other written material, this paper describes experiences from the three projects and discusses...... with strong leadership and a central organisation, whereas the Qasigiannguit project was designed as a community project with population participation in all phases of the project. The two former projects have probably had a greater direct change impact on the community, whereas the latter has strengthened...

Benefits of co-design in service design projects

NARCIS (Netherlands)

Steen, M.; Manschot, M.A.J.; De Koning, N.

2011-01-01

In many service design projects, co-design is seen as critical to success and a range of benefits are attributed to co-design. In this paper, we present an overview of benefits of co-design in service design projects, in order to help the people involved to articulate more precisely and

Benefits of Co-design in Service Design Projects

NARCIS (Netherlands)

Steen, M.G.D.; Manschot, M.; Koning, N. de

2011-01-01

In many service design projects, co-design is seen as critical to success and a range of benefits are attributed to co-design. In this paper, we present an overview of benefits of co-design in service design projects, in order to help the people involved to articulate more precisely and

Designing Project Management

NARCIS (Netherlands)

Heintz, John Linke; Lousberg, L.; Wamelink, J.W.F.; Saari, A.; Huovinen, P.

2016-01-01

In this paper we introduce the concept of Designing Project Management. On the basis of our earlier work, we suggest that there is still a gap between what is known from recent project management literature and what project managers can structurally help in the effectiveness of their work. Assuming

Design Theory Projectability

DEFF Research Database (Denmark)

Baskerville, Richard; Pries-Heje, Jan

2014-01-01

design science research is materially prescriptive, it requires a different perspective in developing the breadth of applications of design theories. In this paper we propose different concepts that embody forms of general technological knowledge The concept of projectability, developed originally......Technological knowledge has been characterized as having a scope that is specific to a particular problem. However, the information systems community is exploring forms of design science research that provide a promising avenue to technological knowledge with broader scope: design theories. Because...... as a means of distinguishing realized generalizations from unrealized generalizations, helps explain how design theories, being prescriptive, possess a different form of applicability. The concept of entrenchment describes the use of a theory in many projections. Together these concepts provide a means...

Reengineering the Project Design Process

Science.gov (United States)

Casani, E.; Metzger, R.

1994-01-01

In response to NASA's goal of working faster, better and cheaper, JPL has developed extensive plans to minimize cost, maximize customer and employee satisfaction, and implement small- and moderate-size missions. These plans include improved management structures and processes, enhanced technical design processes, the incorporation of new technology, and the development of more economical space- and ground-system designs. The Laboratory's new Flight Projects Implementation Office has been chartered to oversee these innovations and the reengineering of JPL's project design process, including establishment of the Project Design Center and the Flight System Testbed. Reengineering at JPL implies a cultural change whereby the character of its design process will change from sequential to concurrent and from hierarchical to parallel. The Project Design Center will support missions offering high science return, design to cost, demonstrations of new technology, and rapid development. Its computer-supported environment will foster high-fidelity project life-cycle development and cost estimating.

Project on School Staff Health Promotion in Poland: The First Experiences

Science.gov (United States)

Woynarowska-Soldan, Magdalena

2015-01-01

Purpose: The purpose of this paper is to present the concept, methods of implementation, results and experiences from the first stage of the three-year project on school staff health promotion carried out within the framework of the health-promoting school (HPS) network in Poland. Design/methodology/approach: The project was implemented in 2012 in…

Privacy impact assessment in the design of transnational public health information systems: the BIRO project.

Science.gov (United States)

Di Iorio, C T; Carinci, F; Azzopardi, J; Baglioni, V; Beck, P; Cunningham, S; Evripidou, A; Leese, G; Loevaas, K F; Olympios, G; Federici, M Orsini; Pruna, S; Palladino, P; Skeie, S; Taverner, P; Traynor, V; Benedetti, M Massi

2009-12-01

To foster the development of a privacy-protective, sustainable cross-border information system in the framework of a European public health project. A targeted privacy impact assessment was implemented to identify the best architecture for a European information system for diabetes directly tapping into clinical registries. Four steps were used to provide input to software designers and developers: a structured literature search, analysis of data flow scenarios or options, creation of an ad hoc questionnaire and conduction of a Delphi procedure. The literature search identified a core set of relevant papers on privacy (n = 11). Technicians envisaged three candidate system architectures, with associated data flows, to source an information flow questionnaire that was submitted to the Delphi panel for the selection of the best architecture. A detailed scheme envisaging an "aggregation by group of patients" was finally chosen, based upon the exchange of finely tuned summary tables. Public health information systems should be carefully engineered only after a clear strategy for privacy protection has been planned, to avoid breaching current regulations and future concerns and to optimise the development of statistical routines. The BIRO (Best Information Through Regional Outcomes) project delivers a specific method of privacy impact assessment that can be conveniently used in similar situations across Europe.

Managing collaboration across boundaries in health information technology projects.

Science.gov (United States)

Garrety, Karin; Dalley, Andrew; McLoughlin, Ian; Wilson, Rob; Yu, Ping

2012-01-01

One reason that it is so difficult to build electronic systems for collecting and sharing health information is that their design and implementation requires clear goals and a great deal of collaboration among people from diverse social and occupational worlds. This paper uses empirical examples from two Australian health informatics projects to illustrate the importance of boundary objects and boundary spanning activities in facilitating the high degree of collaboration required for the design and implementation of workable systems.

18 CFR 157.37 - Project design.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Project design. 157.37... Seasons for Alaska Natural Gas Transportation Projects § 157.37 Project design. In reviewing any... proposed project has been designed to accommodate the needs of shippers who have made conforming bids...

Reengineering the project design process

Science.gov (United States)

Kane Casani, E.; Metzger, Robert M.

1995-01-01

In response to the National Aeronautics and Space Administration's goal of working faster, better, and cheaper, the Jet Propulsion Laboratory (JPL) has developed extensive plans to minimize cost, maximize customer and employee satisfaction, and implement small- and moderate-size missions. These plans include improved management structures and processes, enhanced technical design processes, the incorporation of new technology, and the development of more economical space- and ground-system designs. The Laboratory's new Flight Projects Implementation Development Office has been chartered to oversee these innovations and the reengineering of JPL's project design process, including establishment of the Project Design Center (PDC) and the Flight System Testbed (FST). Reengineering at JPL implies a cultural change whereby the character of the Laboratory's design process will change from sequential to concurrent and from hierarchical to parallel. The Project Design Center will support missions offering high science return, design to cost, demonstrations of new technology, and rapid development. Its computer-supported environment will foster high-fidelity project life-cycle development and more accurate cost estimating. These improvements signal JPL's commitment to meeting the challenges of space exploration in the next century.

Health Activities Project (HAP): Heart Fitness and Action Module.

Science.gov (United States)

Buller, Dave; And Others

Contained within this Health Activities Project (HAP) learning packet are activities for children in grades 5-8. Design of the activities centers around the idea that students can control their own health and safety. Within the Heart Fitness and Action Module are teacher and student folios describing five activities which involve students in…

Visualizing Practices in Project-based Design

DEFF Research Database (Denmark)

Whyte, Jennifer; Tryggestad, Kjell; Comi, Alice

2016-01-01

Project-based design involves a variety of visual representations, which are evolved to make decisions and accomplish project objectives. Yet, such mediated and distributed ways of working are difficult to capture through ethnographies that examine situated design. A novel approach is developed t...... representations enabled participants in project-based design to develop and share understanding. The complexity of projects and their distributed and mediated nature makes this approach timely and important in addressing new research questions and practical challenges.......Project-based design involves a variety of visual representations, which are evolved to make decisions and accomplish project objectives. Yet, such mediated and distributed ways of working are difficult to capture through ethnographies that examine situated design. A novel approach is developed...... of situated design. This allows the researcher to be nimble, tracing connections across complex engineering projects; reconstructing practices through their visual representations; and observing their effects. Second, it articulates how, in these empirical cases, interaction with a cascade of visual...

Considerations for the design of safe and effective consumer health IT applications in the home.

Science.gov (United States)

Zayas-Cabán, Teresa; Dixon, Brian E

2010-10-01

Consumer health IT applications have the potential to improve quality, safety and efficiency of consumers' interactions with the healthcare system. Yet little attention has been paid to human factors and ergonomics in the design of consumer health IT, potentially limiting the ability of health IT to achieve these goals. This paper presents the results of an analysis of human factors and ergonomics issues encountered by five projects during the design and implementation of home-based consumer health IT applications. Agency for Healthcare Research and Quality-funded consumer health IT research projects, where patients used the IT applications in their homes, were reviewed. Project documents and discussions with project teams were analysed to identify human factors and ergonomic issues considered or addressed by project teams. The analysis focused on system design and design processes used as well as training, implementation and use of the IT intervention. A broad range of consumer health IT applications and diverse set of human factors and ergonomics issues were identified. The design and implementation processes used resulted in poor fit with some patients' healthcare tasks and the home environment and, in some cases, resulted in lack of use. Clinician interaction with patients and the information provided through health IT applications appeared to positively influence adoption and use. Consumer health IT application design would benefit from the use of human factors and ergonomics design and evaluation methods. Considering the context in which home-based consumer health IT applications are used will likely affect the ability of these applications to positively impact the quality, safety and efficiency of patient care.

The Virtual Design Team: Designing Project Organizations as Engineers Design Bridges

Directory of Open Access Journals (Sweden)

Raymond E. Levitt

2012-08-01

Full Text Available This paper reports on a 20-year program of research intended to advance the theory and practice of organization design for projects from its current status as an art practiced by a handful of consultants worldwide, based on their intuition and tacit knowledge, to: (1 an “organizational engineering” craft, practiced by a new generation of organizational designers; and (2 an attractive and complementary platform for new modes of “virtual synthetic organization theory research.” The paper begins with a real-life scenario that provided the motivation for developing the Virtual Design Team (VDT, an agent-based project organizational simulation tool to help managers design the work processes and organization of project teams engaged in large, semi-routine but complex and fast-paced projects. The paper sets out the underlying philosophy, representation, reasoning, and validation of VDT, and it concludes with suggestions for future research on computational modeling for organization design to extend the frontiers of organizational micro-contingency theory and expand the range of applicability and usefulness of design tools for project organizations and supply-chain networks based on this theory.

20% Research & Design Science Project

Science.gov (United States)

Spear, Beth A.

2015-04-01

A project allowing employees to use 15 % of their time on independent projects was established at 3M in the 1950's. The result of this project included products like post it notes and masking tape. Google allows its employees to use 20% of their time on independently pursued projects. The company values creativity and innovation. Employees are allowed to explore projects of interest to them one day out of the week, 20 % of their work week. Products like AdSense, Gmail, Google Transit, Google News, and Google Talk are the result of this 20 % program. My school is implementing the Next Generation Science Standards (NGSS) as part of our regularly scheduled curriculum review. These new standards focus on the process of learning by doing and designing. The NGSS are very hands on and active. The new standards emphasize learning how to define, understand and solve problems in science and technology. In today's society everyone needs to be familiar with science and technology. This project allows students to develop and practice skills to help them be more comfortable and confident with science and technology while exploring something of interest to them. This project includes three major parts: research, design, and presentation. Students will spend approximately 2-4 weeks defining a project proposal and educating themselves by researching a science and technology topic that is of interest to them. In the next phase, 2-4 weeks, students design a product or plan to collect data for something related to their topic. The time spent on research and design will be dependant on the topic students select. Projects should be ambitious enough to encompass about six weeks. Lastly a presentation or demonstration incorporating the research and design of the project is created, peer reviewed and presented to the class. There are some problems anticipated or already experienced with this project. It is difficult for all students to choose a unique topic when you have large class sizes

Cooperation and communication challenges in small-scale eHealth development projects.

Science.gov (United States)

Petersen, Lone Stub; Bertelsen, Pernille; Bjørnes, Charlotte

2013-12-01

In eHealth development there is an increasing focus on user participation inspired by the information systems field of practice and research. There are, however, many other challenges in developing information systems that fit healthcare practices. One of these is the challenge of cooperation and communication in development projects that are initiated and managed by clinicians e.g. cooperating with IT professionals in 'bottom up' health informatics projects that have been initiated and are managed by healthcare professional project managers. The analysis and results are drawn from a qualitative case study on a systems development project that was managed by a local, non-technical, healthcare professional and the complex blend and interactions with the IT professionals in the phases of ideas, design, development, implementation, maintenance and distribution. We analyze the challenges of cooperation and communication using perspectives from information systems research and the concepts of 'language-games' and 'shared design spaces', and thereby exploring the boundaries between the different communication, practice and culture of the IT professionals and the healthcare professionals. There is a need to (a) develop a better understanding of the development process from the point of view of the 'user' and (b) tools for making technical knowledge explicit in the development process. Cooperative and communicative methods are needed that support and develop the shared design spaces between IT professionals and the clinical context in order to strengthen small-scale health information systems projects. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Articulating current service development practices: a qualitative analysis of eleven mental health projects.

Science.gov (United States)

Jun, Gyuchan Thomas; Morrison, Cecily; Clarkson, P John

2014-01-17

The utilisation of good design practices in the development of complex health services is essential to improving quality. Healthcare organisations, however, are often seriously out of step with modern design thinking and practice. As a starting point to encourage the uptake of good design practices, it is important to understand the context of their intended use. This study aims to do that by articulating current health service development practices. Eleven service development projects carried out in a large mental health service were investigated through in-depth interviews with six operation managers. The critical decision method in conjunction with diagrammatic elicitation was used to capture descriptions of these projects. Stage-gate design models were then formed to visually articulate, classify and characterise different service development practices. Projects were grouped into three categories according to design process patterns: new service introduction and service integration; service improvement; service closure. Three common design stages: problem exploration, idea generation and solution evaluation - were then compared across the design process patterns. Consistent across projects were a top-down, policy-driven approach to exploration, underexploited idea generation and implementation-based evaluation. This study provides insight into where and how good design practices can contribute to the improvement of current service development practices. Specifically, the following suggestions for future service development practices are made: genuine user needs analysis for exploration; divergent thinking and innovative culture for idea generation; and fail-safe evaluation prior to implementation. Better training for managers through partnership working with design experts and researchers could be beneficial.

Extending Sociotechnical design to project conception

DEFF Research Database (Denmark)

Kampf, Constance

2009-01-01

between knowledge and technology through knowledge communication processes, cultural and rhetorical contexts. This connection is examined from a process point of view through the development of project goals and objectives to situate technology. The data comes from a Project Management course in which...... the students were asked to design and plan projects to situate a mobile phone game in the social context around a museum in Helsinki or their online course management system.   The paper traces the evolution of students' project goals and objectives with respect to knowledge communication theory, demonstrating...... the potential of knowledge communication concepts for socio-technical design processes, as well as the implications of socio-technical design processes in extending our understanding of knowledge communication. Keywords: Knowledge Communication, Knowledge Management, Socio-Technical Design, Project Management....

Systematic design for trait introgression projects

OpenAIRE

Cameron, John N.; Han, Ye; Wang, Lizhi; Beavis, William D.

2017-01-01

Key message Using an Operations Research approach, we demonstrate design of optimal trait introgression projects with respect to competing objectives. Abstract We demonstrate an innovative approach for designing Trait Introgression (TI) projects based on optimization principles from Operations Research. If the designs of TI projects are based on clear and measurable objectives, they can be translated into mathematical models with decision variables and constraints that can be translated into ...

Health System Measurement Project

Data.gov (United States)

U.S. Department of Health & Human Services — The Health System Measurement Project tracks government data on critical U.S. health system indicators. The website presents national trend data as well as detailed...

The School Children Mental Health in Europe (SCMHE) Project: Design and First Results

OpenAIRE

Kovess, Viviane; Carta, Mauro Giovanni; Pez, Ondine; Bitfoi, Adina; Ko?, Ceren; Goelitz, Dietmar; Kuijpers, Rowella; Lesinskiene, Sigita; Mihova, Zlatka; Otten, Roy

2015-01-01

Background : The School Children Mental Health in Europe (SCMHE) project aims to build up a set of indicators to collect and monitor children's mental health in an efficient and comparable methodology across the EU countries. It concerns primary schools children aged 6 to 11 years a range where few data are available whereas school interventions are promising. Methods : Three informants were used: parents, teachers and children. In selecting instruments language, instruments were selected acc...

Developing an action-based health and safety training project in southern China.

Science.gov (United States)

Szudy, Betty; O'Rourke, Dara; Brown, Garrett D

2003-01-01

A project brought together international footwear manufacturers, labor rights groups, local contract factories, and occupational health professionals to strengthen factory health and safety programs in southern China. Steps involved in the two-year project, including needs assessment, interviews and focus groups with workers and supervisors; design and development of a participatory workshop; development of plant-wide health and safety committees in three footwear factories; and evaluation project impact, are discussed. The project significantly increased occupational safety and health knowledge, and hazards in the factories were identified and corrected. Successes and challenges faced by three functioning worker-management health and safety committees are discussed. Key elements to create effective programs with meaningful participation by workers include: 1) developing clear guidelines that enable multi-stakeholder groups to collaborate; 2) obtaining top-level management support; 3) building workers' knowledge and capacity to fully participate; 4) involving local labor rights groups and occupational professionals in support and technical assistance; and 5) connecting project goals to larger issues within a country and the global economy.

UMTRA Project: Environment, Safety, and Health Plan

International Nuclear Information System (INIS)

1995-02-01

The US Department of Energy has prepared this UMTRA Project Environment, Safety, and Health (ES and H) Plan to establish the policy, implementing requirements, and guidance for the UMTRA Project. The requirements and guidance identified in this plan are designed to provide technical direction to UMTRA Project contractors to assist in the development and implementation of their ES and H plans and programs for UMTRA Project work activities. Specific requirements set forth in this UMTRA Project ES and H Plan are intended to provide uniformity to the UMTRA Project's ES and H programs for processing sites, disposal sites, and vicinity properties. In all cases, this UMTRA Project ES and H Plan is intended to be consistent with applicable standards and regulations and to provide guidance that is generic in nature and will allow for contractors' evaluation of site or contract-specific ES and H conditions. This plan specifies the basic ES and H requirements applicable to UMTRA Project ES and H programs and delineates responsibilities for carrying out this plan. DOE and contractor ES and H personnel are expected to exercise professional judgment and apply a graded approach when interpreting these guidelines, based on the risk of operations

Engaging clinicians in health informatics projects.

Science.gov (United States)

Caballero Muñoz, Erika; Hullin Lucay Cossio, Carola M

2010-01-01

This chapter gives an educational overview of: * The importance of the engagement of clinicians within a health informatics project * Strategies required for an effective involvement of clinicians throughout a change management process within a clinical context for the implementation of a health informatics project * The critical aspects for a successful implementation of a health informatics project that involves clinicians as end users * Key factors during the administration of changes during the implementation of an informatics project for an information system in clinical practice.

A user-centered model for designing consumer mobile health (mHealth) applications (apps).

Science.gov (United States)

Schnall, Rebecca; Rojas, Marlene; Bakken, Suzanne; Brown, William; Carballo-Dieguez, Alex; Carry, Monique; Gelaude, Deborah; Mosley, Jocelyn Patterson; Travers, Jasmine

2016-04-01

Mobile technologies are a useful platform for the delivery of health behavior interventions. Yet little work has been done to create a rigorous and standardized process for the design of mobile health (mHealth) apps. This project sought to explore the use of the Information Systems Research (ISR) framework as guide for the design of mHealth apps. Our work was guided by the ISR framework which is comprised of 3 cycles: Relevance, Rigor and Design. In the Relevance cycle, we conducted 5 focus groups with 33 targeted end-users. In the Rigor cycle, we performed a review to identify technology-based interventions for meeting the health prevention needs of our target population. In the Design Cycle, we employed usability evaluation methods to iteratively develop and refine mock-ups for a mHealth app. Through an iterative process, we identified barriers and facilitators to the use of mHealth technology for HIV prevention for high-risk MSM, developed 'use cases' and identified relevant functional content and features for inclusion in a design document to guide future app development. Findings from our work support the use of the ISR framework as a guide for designing future mHealth apps. Results from this work provide detailed descriptions of the user-centered design and system development and have heuristic value for those venturing into the area of technology-based intervention work. Findings from this study support the use of the ISR framework as a guide for future mHealth app development. Use of the ISR framework is a potentially useful approach for the design of a mobile app that incorporates end-users' design preferences. Copyright © 2016 Elsevier Inc. All rights reserved.

Incorporation of project-based learning into an occupational health course.

Science.gov (United States)

Dehdashti, Alireza; Mehralizadeh, Semira; Kashani, Masoud Motalebi

2013-01-01

Use of an appropriate teaching approach is a major concern for faculty members who are involved in occupational health and safety academic education. The challenge is to explore teaching tools to equip students with knowledge and skills to prepare them for their practices, in which they will encounter occupational health and safety issues in various occupational settings. The current study presents the design and implementation of a team project-based learning approach for undergraduate occupational health students to examine the appropriateness and perceptions of students and educators with regard to such a learning experience. Steps were taken to guide the educators and students through the learning process based on projects completed in teams. The research tools for collecting data were a questionnaire and semi-structured interviews with participants. The results illustrated that use of the proposed teaching approach as part of occupational health education may have the potential to motivate and enhance the active roles of educators and students in the learning process, and improve students' technical and social skills that are crucial for practice in the occupational health field. The study findings showed that project-based learning may provide a promising teaching strategy in the education and training of occupational health students. In addition, academic institutions should encourage educators to plan, introduce and evaluate the effectiveness of project-based learning.

UMTRA project office federal employee occupational safety and health program plan

International Nuclear Information System (INIS)

1994-06-01

This document establishes the Federal Employee Occupational Safety and Health (FEOSH) Program for the US Department of Energy (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project Office. This program will ensure compliance with applicable requirements of DOE Order 3790.1B and DOE Albuquerque Operations Office (AL) Order 3790.lA. FEOSH Program responsibilities delegated by the DOE-AL to the UMTRA Project Office by AL Order 3790.1A also are assigned. The UMTRA Project Office has developed the UMTRA Project Environmental, Safety, and Health (ES ampersand H) Plan (DOE, 1992), which establishes the basic programmatic ES ampersand H requirements for all participants on the UMTRA Project. The ES ampersand H plan is designed primarily to cover remedial action activities at UMTRA sites and defines the ES ampersand H responsibilities of both the UMTRA Project Office and its contractors. The UMTRA FEOSH Program described herein is a subset of the overall UMTRA ES ampersand H program and covers only federal employees working on the UMTRA Project

NPP-Nuclear Island Design. From conceptual design to Project execution

International Nuclear Information System (INIS)

Lanchet, Dominique

2014-01-01

The second day opened with the lecture of Dominique Lanchet, Design Senior Vice President at AREVA Engineering and Project. Dominique Lanchet gave us an overview of the steps of a Nuclear Island Design creation from the conceptual design to the project execution, giving the examples of the EPR and ATMEA1 TM nuclear reactors

Diagnostic framework and health check tool for engineering and technology projects

Directory of Open Access Journals (Sweden)

Simon P Philbin

2014-10-01

Full Text Available Purpose: Development of a practitioner oriented diagnostic framework and health check tool to support the robust assessment of engineering and technology projects.Design/methodology/approach: The research is based on a literature review that draws together insights on project assessment and critical success factors to establish an integrated systems view of projects. This is extended to allow a comprehensive diagnostic framework to be developed along with a high-level health check tool that can be readily deployed on projects. The utility of the diagnostic framework and health check tool are explored through three illustrative case studies, with two from Canada and one from the United Kingdom. Findings andOriginality/value: The performance of engineering and technology projects can be viewed through a systems perspective and being a function of six sub-systems that are: process, technology, resources, impact, knowledge and culture. The diagnostic framework that is developed through this research integrates these sub-systems to provide a comprehensive assessment methodology for projects, which is linked to existing best practice for project reviews, performance management and maturity models. The case studies provide managerial insights that are related to the diagnostic framework but crucially also position the approach in the context of industrial applications for construction engineering and technology management.Research limitations/implications: The case study approach includes two case studies from the construction and facilities development sector with the third case study from the research and technology sector. Further work is required to investigate the use of the diagnostic framework and health check tool in other sectors.Practical implications: The health check tool will be of practical benefit to new projects managers that require access to a robust and convenient project review methodology for assessing the status and health of a

Design methodology and projects for space engineering

Science.gov (United States)

Nichols, S.; Kleespies, H.; Wood, K.; Crawford, R.

1993-01-01

NASA/USRA is an ongoing sponsor of space design projects in the senior design course of the Mechanical Engineering Department at The University of Texas at Austin. This paper describes the UT senior design sequence, consisting of a design methodology course and a capstone design course. The philosophical basis of this sequence is briefly summarized. A history of the Department's activities in the Advanced Design Program is then presented. The paper concludes with a description of the projects completed during the 1991-92 academic year and the ongoing projects for the Fall 1992 semester.

Building a partnership to evaluate school-linked health services: the Cincinnati School Health Demonstration Project.

Science.gov (United States)

Rose, Barbara L; Mansour, Mona; Kohake, Kelli

2005-12-01

The Cincinnati School Health Demonstration Project was a 3-year collaboration that evaluated school-linked health services in 6 urban elementary (kindergarten to eighth grade) schools. Partners from the Cincinnati Health Department, Cincinnati Public Schools, Cincinnati Children's Hospital Medical Center, and The Health Foundation of Greater Cincinnati wanted to determine if levels of school-linked care made a difference in student quality of life, school connectedness, attendance, emergency department use, and volume of referrals to health care specialists. School nurses, principals and school staff, parents and students, upper-level managers, and health service researchers worked together over a 2.5-year period to learn about and use new technology to collect information on student health, well-being, and outcome measures. Varying levels of school health care intervention models were instituted and evaluated. A standard model of care was compared with 2 models of enhanced care and service. The information collected from students, parents, nurses, and the school system provided a rich database on the health of urban children. School facilities, staffing, and computer technology, relationship building among stakeholders, extensive communication, and high student mobility were factors that influenced success and findings of the project. Funding for district-wide computerization and addition of school health staff was not secured by the end of the demonstration project; however, relationships among the partners endured and paved the way for future collaborations designed to better serve urban school children in Cincinnati.

Systematic design for trait introgression projects.

Science.gov (United States)

Cameron, John N; Han, Ye; Wang, Lizhi; Beavis, William D

2017-10-01

Using an Operations Research approach, we demonstrate design of optimal trait introgression projects with respect to competing objectives. We demonstrate an innovative approach for designing Trait Introgression (TI) projects based on optimization principles from Operations Research. If the designs of TI projects are based on clear and measurable objectives, they can be translated into mathematical models with decision variables and constraints that can be translated into Pareto optimality plots associated with any arbitrary selection strategy. The Pareto plots can be used to make rational decisions concerning the trade-offs between maximizing the probability of success while minimizing costs and time. The systematic rigor associated with a cost, time and probability of success (CTP) framework is well suited to designing TI projects that require dynamic decision making. The CTP framework also revealed that previously identified 'best' strategies can be improved to be at least twice as effective without increasing time or expenses.

Managing externally financed projects: the Integrated Primary Health Care Project in Bolivia.

Science.gov (United States)

Homedes, N

2001-12-01

Bolivia is one of the poorest countries in Latin America. Health indicators are very poor, communicable diseases are prevalent and, coupled with malnutrition, remain the major killers of children under 5 years old. The Integrated Primary Health Care Project (PROISS) was a US$39 million project executed by the Ministry of Health (MOH), 50% financed by the World Bank and aimed at improving primary health care in the four largest Bolivian municipalities. The implementation of the project started in 1990 and ended in 1997. During implementation it went through three distinct phases: Phase 1 (1990-94) was a period characterized by conflict and confusion; Phase 2 (1995-mid-1996) documented major improvements in coverage and service quality; and Phase 3 (mid-1996-97) witnessed the decline of the project. This paper explores the factors that contributed to the success and the decline of the project, draws lessons for project managers and international agencies involved in the definition and implementation of social sector projects, and discusses the unlikelihood that externally financed projects can have a sustainable impact on the development of the health sector of recipient countries.

Designing minimum data sets of health smart card system

Directory of Open Access Journals (Sweden)

Mohtaram Nematollahi

2014-10-01

Full Text Available Introduction: Nowadays different countries benefit from health system based on health cards and projects related to smart cards. Lack of facilities which cover this technology is obvious in our society. This paper aims to design Minimum Data Sets of Health Smart Card System for Iran. Method: This research was an applied descriptive study. At first, we reviewed the same projects and guidelines of selected countries and the proposed model was designed in accordance to the country’s needs, taking people’s attitude about it by Delphi technique. A data analysis in study stage of MDS(Minimum Data Sets of Health Smart Card in the selective countries was done by comparative tables and determination of similarities and differences of the MDS. In the stage of gaining credit for model, it was accomplished with descriptive statistics to the extent of absolute and relative frequency through SPSS (version 16. Results: MDS of Health Smart Card for Iran is presented in the patient’s card and health provider’s card on basisof studiesin America, Australia, Turkey and Belgium and needs of our country and after doing Delphi technique with 94 percent agreement confirmed. Conclusion: Minimum Data Sets of Health Smart Card provides continuous care for patients and communication among providers. So, it causes a decrease in the complications of threatening diseases. Collection of MDS of diseases increases the quality of care assessment

Balancing Design Project Supervision and Learning Facilitation

DEFF Research Database (Denmark)

Nielsen, Louise Møller

2012-01-01

experiences and expertise to guide the students’ decisions in relation to the design project. This paper focuses on project supervision in the context of design education – and more specifically on how this supervision is unfolded in a Problem Based Learning culture. The paper explores the supervisor......’s balance between the roles: 1) Design Project Supervisor – and 2) Learning Facilitator – with the aim to understand when to apply the different roles, and what to be aware of when doing so. This paper represents the first pilot-study of a larger research effort. It is based on a Lego Serious Play workshop......In design there is a long tradition for apprenticeship, as well as tradition for learning through design projects. Today many design educations are positioned within the University context, and have to be aligned with the learning culture and structure, which they represent. This raises a specific...

23 CFR 710.313 - Design-build projects.

Science.gov (United States)

2010-04-01

... FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RIGHT-OF-WAY AND ENVIRONMENT RIGHT-OF-WAY AND REAL ESTATE Project Development § 710.313 Design-build projects. (a) In the case of a design-build project, right-of-way must be acquired and cleared in accordance with the Uniform Relocation Assistance...

User Participation in Coproduction of Health Innovation: Proposal for a Synergy Project.

Science.gov (United States)

Nygren, Jens; Zukauskaite, Elena; Westberg, Niklas

2018-05-09

This project concerns advancing knowledge, methods, and logic for user participation in coproduction of health innovations. Such advancement is vital for several reasons. From a user perspective, participation in coproduction provides an opportunity to gain real influence over goal definition, design, and implementation of health innovations, ensuring that the solution developed solves real problems in right ways. From a societal perspective, it's a mean to improve the efficiency of health care and the implementation of the Patient Act. As for industry, frameworks and knowledge of coproduction offer tools to operate in a complex sector, with great potential for innovation of services and products. The fundamental objective of this project is to advance knowledge and methods of how user participation in the coproduction of health innovations can be applied in order to benefit users, industry, and public sector. This project is a synergy project, which means that the objective will be accomplished through collaboration and meta-analysis between three subprojects that address different user groups, apply different strategies to promote human health, and relate to different parts of the health sector. Furthermore, subprojects focus on distinctive stages in the spectrum of innovation, with the objective to generate knowledge of the innovation process as a whole. The project is organized around three work packages related to three challenges-coproduction, positioning, and realization. Each subproject is designed such that it has its own field of study with clearly identified objectives but also targets work packages to contribute to the project as a whole. The work on the work packages will use case methodology for data collection and analysis based on the subprojects as data sources. More concretely, logic of multiple case studies will be applied with each subproject representing a separate case which is similar to each other in its attention to user participation in

The Coronary Health Improvement Projects Impact on Lowering Eating, Sleep, Stress, and Depressive Disorders

Science.gov (United States)

Merrill, Ray M.; Aldana, Stephen G.; Greenlaw, Roger L.; Diehl, Hans A.

2008-01-01

Background: The Coronary Health Improvement Project (CHIP) is designed to lower cardiovascular risk factors among a group of generally healthy individuals through health education. Purpose: This study will evaluate the efficacy of the CHIP intervention at improving eating, sleep, stress, and depressive disorders. Methods: A health education…

Information Flows in Networked Engineering Design Projects

DEFF Research Database (Denmark)

Parraguez, Pedro; Maier, Anja

Complex engineering design projects need to manage simultaneously multiple information flows across design activities associated with different areas of the design process. Previous research on this area has mostly focused on either analysing the “required information flows” through activity...... networks at the project level or in studying the social networks that deliver the “actual information flow”. In this paper we propose and empirically test a model and method that integrates both social and activity networks into one compact representation, allowing to compare actual and required...... information flows between design spaces, and to assess the influence that these misalignments could have on the performance of engineering design projects....

The EU-project United4Health: User-centred design of an information system for a Norwegian telemedicine service.

Science.gov (United States)

Smaradottir, Berglind; Gerdes, Martin; Martinez, Santiago; Fensli, Rune

2016-10-01

Organizational changes of health care services in Norway brought to light a need for new clinical pathways. This study presents the design and evaluation of an information system for a new telemedicine service for chronic obstructive pulmonary disease patients after hospital discharge. A user-centred design approach was employed composed of a workshop with end-users, two user tests and a field trial. For data collection, qualitative methods such as observations, semi-structured interviews and a questionnaire were used. User workshop's outcome informed the implementation of the system initial prototype, evaluated by end-users in a usability laboratory. Several usability and functionality issues were identified and solved, such as the interface between the initial colour scheme and the triage colours. Iterative refinements were made and a second user evaluation showed that the main issues were solved. The responses to a questionnaire presented a high score of user satisfaction. In the final phase, a field trial showed satisfactory use of the system. This study showed how the target end-users groups were actively involved in identifying the needs, suggestions and preferences. These aspects were addressed in the development of an information system through a user-centred design process. The process efficiently enabled users to give feedback about design and functionality. Continuous refinement of the system was the key to full development and suitability for the telemedicine service. This research was a result of the international cooperation between partners within the project United4Health, a part of the Seventh Framework Programme for Research of the European Union. © The Author(s) 2015.

Innovation in health service management: Adoption of project management offices to support major health care transformation.

Science.gov (United States)

Lavoie-Tremblay, Mélanie; Aubry, Monique; Cyr, Guylaine; Richer, Marie-Claire; Fortin-Verreault, Jean-François; Fortin, Claude; Marchionni, Caroline

2017-11-01

To explore the characteristics that influence project management offices acceptance and adoption in healthcare sector. The creation of project management offices has been suggested as a promising avenue to promote successful organisational change and facilitate evidence-based practice. However, little is known about the characteristics that promote their initial adoption and acceptance in health care sector. This knowledge is important in the context where many organisations are considering implementing project management offices with nurse managers as leaders. A descriptive multiple case study design was used. The unit of analysis was the project management offices. The study was conducted in three university-affiliated teaching hospitals in 2013-14 (Canada). Individual interviews (n = 34) were conducted with senior managers. Results reveal that project management offices dedicated to project and change management constitute an innovation and an added value that addresses tangible needs in the field. Project management offices are an innovation highly compatible with health care managers and their approach has parallels to the process of clinical problem solving and reasoning well-known to adopters. This knowledge is important in a context where many nurses hold various roles in project management offices, such as Director, project manager, clinical expert and knowledge broker. © 2017 John Wiley & Sons Ltd.

Health Advocacy Project: Evaluating the Benefits of Service Learning to Nursing Students and Low Income Individuals Involved in a Community-Based Mental Health Promotion Project.

Science.gov (United States)

Samuels-Dennis, Joan; Xia, Liudi; Secord, Sandra; Raiger, Amelia

2016-10-08

Poverty, along with other factors such as unemployment, work and life stressors, interpersonal violence, and lack of access to high quality health and/or social services all play a role in determining who develops a mental illness and for whom those symptoms persist or worsen. Senior nursing student preparing to enter the field and working in a service learning capacity may be able to influence early recovery and symptom abatement among those most vulnerable to mental illness. A consortium of community stakeholders and researchers collaboratively designed a 10-week mental health promotion project called the Health Advocacy Project (HAP). The project combines case management and system navigation support delivered by trained and highly supervised nursing students to individuals experiencing major depressive disorder (MDD) and/or post-traumatic stress disorder (PTSD). In this article, we present the findings of a qualitative fidelity evaluation that examines the effectiveness of nursing students in delivering the health advocacy intervention at the level and with the intensity originally intended. The findings demonstrate how the services of senior nursing students may be optimized to benefit our healthcare system and populations most at risk for developing MDD and PTSD.

34 CFR 637.13 - What are design projects?

Science.gov (United States)

2010-07-01

... EDUCATION, DEPARTMENT OF EDUCATION MINORITY SCIENCE AND ENGINEERING IMPROVEMENT PROGRAM What Kinds of Projects Does the Secretary Assist Under This Program? § 637.13 What are design projects? (a) Design... 34 Education 3 2010-07-01 2010-07-01 false What are design projects? 637.13 Section 637.13...

Integrating Public Health and Health Promotion Practice in the Medical Curriculum: A Self-Directed Team-Based Project Approach

Directory of Open Access Journals (Sweden)

Geraldine Kershaw

2017-08-01

Full Text Available Preparing health professionals in health promotion (HP and disease prevention is essential for improvement of population health, community HP, and better health care for individuals. The aim of this article is to describe an HP project in the form of a major self-directed project-based learning task integrated within the curriculum in the second year of the medical degree program at United Arab Emirates University. The project introduces students to public health and HP practice and develops students’ literature searching, writing, presentation skills, and team work. Students learn the principles underlying behavioral change, and the design of HP programs and materials, through a lecture format. Small groups of students each choose a specific health topic for their project. Over 11 weeks, students obtain information about their topic from appropriate sources (library, PubMed, Google Scholar, credible health sources such as World Health Organization. Using the principles learned in the lectures, they develop appropriate materials for their target audience: for example, posters, a pamphlet, social media content, or a video or radio message. Students seek advice from specialist faculty as needed. In week 12, each team presents their project background, rationale, and materials to their colleagues in a seminar format open to all faculty. They then submit the materials they developed for assessment. Group marks are assigned for presentations and materials. Key concepts are assessed by multiple choice questions in comprehensive course examinations. By participation in the HP project, many students develop a solid background in prevention. The information retrieval, writing, and presentation skills, as well as experience of team work, are valuable both for the remaining years of their training and their future careers.

Extending Sociotechnical Design to Project Conception

DEFF Research Database (Denmark)

Kampf, Constance Elizabeth

2011-01-01

Project management processes offer specific sites for understanding the interplay of the social and the technical. This article focuses on the connection between knowledge and technology through knowledge communication processes, cultural & rhetorical contexts in projects, and the iterative process...... and the Aarhus School of Business, University of Aarhus, Denmark. The analysis demonstrates the potential of knowledge communication concepts for social technical design and highlights the cultural context of the designers as a key factor to consider in socio-technical design....

Including Health in Environmental Assessments of Major Transport Infrastructure Projects: A Documentary Analysis.

Science.gov (United States)

Riley, Emily; Harris, Patrick; Kent, Jennifer; Sainsbury, Peter; Lane, Anna; Baum, Fran

2018-05-10

Transport policy and practice impacts health. Environmental Impact Assessments (EIAs) are regulated public policy mechanisms that can be used to consider the health impacts of major transport projects before they are approved. The way health is considered in these environmental assessments (EAs) is not well known. This research asked: How and to what extent was human health considered in EAs of four major transport projects in Australia. We developed a comprehensive coding framework to analyse the Environmental Impact Statements (EISs) of four transport infrastructure projects: three road and one light rail. The coding framework was designed to capture how health was directly and indirectly included. We found that health was partially considered in all four EISs. In the three New South Wales (NSW) projects, but not the one South Australian project, this was influenced by the requirements issued to proponents by the government which directed the content of the EIS. Health was assessed using human health risk assessment (HHRA). We found this to be narrow in focus and revealed a need for a broader social determinants of health approach, using multiple methods. The road assessments emphasised air quality and noise risks, concluding these were minimal or predicted to improve. The South Australian project was the only road project not to include health data explicitly. The light rail EIS considered the health benefits of the project whereas the others focused on risk. Only one project considered mental health, although in less detail than air quality or noise. Our findings suggest EIAs lag behind the known evidence linking transport infrastructure to health. If health is to be comprehensively included, a more complete model of health is required, as well as a shift away from health risk assessment as the main method used. This needs to be mandatory for all significant developments. We also found that considering health only at the EIA stage may be a significant

Mobile health systems for bipolar disorder: the relevance of non-functional requirements in MONARCA project

DEFF Research Database (Denmark)

Mayora, Oscar; Frost, Mads; Arnrich, Bert

2016-01-01

This paper presents a series of challenges for developing mobile health solutions for mental health as a result of MONARCA project three-year activities. The lessons learnt on the design, development and evaluation of a mobile health system for supporting the treatment of bipolar disorder....... The findings presented here are the result of over 3 years of activity within the MONARCA EU project. The challenges listed and detailed in this paper may be used in future research as a starting point for identifying important non-functional requirements involved in mobile health provisioning...

Rationale, Design, and Methods for Process Evaluation in the Childhood Obesity Research Demonstration Project.

Science.gov (United States)

Joseph, Sitara; Stevens, Andria M; Ledoux, Tracey; O'Connor, Teresia M; O'Connor, Daniel P; Thompson, Debbe

2015-01-01

The cross-site process evaluation plan for the Childhood Obesity Research Demonstration (CORD) project is described here. The CORD project comprises 3 unique demonstration projects designed to integrate multi-level, multi-setting health care and public health interventions over a 4-year funding period. Three different communities in California, Massachusetts, and Texas. All CORD demonstration projects targeted 2-12-year-old children whose families are eligible for benefits under Title XXI (CHIP) or Title XIX (Medicaid). The CORD projects were developed independently and consisted of evidence-based interventions that aim to prevent childhood obesity. The interventions promote healthy behaviors in children by applying strategies in 4 key settings (primary care clinics, early care and education centers, public schools, and community institutions). The CORD process evaluation outlined 3 main outcome measures: reach, dose, and fidelity, on 2 levels (researcher to provider, and provider to participant). The plan described here provides insight into the complex nature of process evaluation for consortia of independently designed multi-level, multi-setting intervention studies. The process evaluation results will provide contextual information about intervention implementation and delivery with which to interpret other aspects of the program. Copyright © 2015 Society for Nutrition Education and Behavior. All rights reserved.

Learning from participatory design projects across industries

DEFF Research Database (Denmark)

Broberg, Ole; Souza da Conceição, Carolina

2017-01-01

Summative Statement: A preliminary framework for participatory design projects (PDP) was developed based on a retrospective analysis of five PDPs across different industries. The framework may serve as a guidance for planning and conducting PDPs. Problem statement: A growing number of experiences...... with participatory design or participatory ergonomics projects have been gained within the field of macro-ergonomics. It is suggested that the Participatory Ergonomics Framework (PEF) validated by Haines et al. (2002) needs to be updated based on these experiences and hence more focussed on design activities....... Research Objective / Question: The objective of this study was to update and design-orient the PEF based on experiences with PDPs within the last ten years. Methodology: Five participatory design projects across different industries were systematically analyzed and compared in order to develop a framework...

Project time boxing and milestones as drivers for open design projects

DEFF Research Database (Denmark)

Tollestrup, Christian H. T.

2015-01-01

is very positive and that the structure, strict enforcement and rolling project management responsibility in a group work setting really helps them drive the project forward with high motivation. The main challenge lies in the balance between loading the teams with too many challenges and just providing......The Curriculums and programs in Problem Based Learning (PBL) utilizes the project-format in a team based setting for rehearsing the competencies of applying the design-oriented skills and knowledge learned in courses and workshops. If the project period is self-organised, there is a tendency......, because of the facilitated format where ‘disturbances’ are eliminated. If successful the state of creative flow is achieved. So how can we create a sense of urgency in longer project periods, not just workshop format, that would help a team of design students to engage and drive the project from the start...

Needs assessment in health research projects: a new approach to project management in iran.

Science.gov (United States)

Peykari, Niloofar; Owlia, Parviz; Malekafzali, Hossein; Ghanei, Mostafa; Babamahmoodi, Abdolreza; Djalalinia, Shirin

2013-01-01

The science and technology health plan has defined the outline of health research to the national vision of Iran by 2025. The aim of this study was to focus on the process of needs assessment of health research projects also health research priority setting in Iran. THE PROJECT MANAGEMENT LIFE CYCLE HAS FOUR PHASES: Initiation, Planning, Execution and Closure. Based on abovementioned points we conducted the study. Focusing on the needs assessment led to systematic implementation of needs assessment of health project in all of the medical sciences universities. Parallel with this achieved strategies health research priority setting was followed through specific process from empowerment to implementation. We should adopt with more systematic progressive methods of health project managements for both our national convenience as well as our international health research programs.

Project management in interior design services

OpenAIRE

Şahinoglu, Alp

1997-01-01

Ankara : Bilkent University, Department of Interior Architecture and Environmental Design and Institute of Fine Arts, 1997. Thesis (Master's) -- Bilkent University, 1997. Includes bibliographical references. In this study, the concept of project management is analyzed within the framework of interior design services. Project management has been defined as the managing and coordination of all human and physical resources, in order to accomplish the predetermined goals (aim of the proj...

Reference Design Project Book: NUSEL-Homestake

OpenAIRE

Haxton, W. C.

2003-01-01

This submission includes the overview, science timeline, reference design, WBS, and mine status sections of the Homestake collaboration's Reference Design Project Book. The Project Book describes the specific plan for converting the Homestake Gold Mine into a facility for physics, earth science, and engineering. The proposed developments on the 7400- and 4850-ft levels are presented, along with the plans for adapting Homestake's existing infrastructure for science. The plan differs substantia...

Design of the DISCovery project: tailored work-oriented interventions to improve employee health, well-being, and performance-related outcomes in hospital care

Directory of Open Access Journals (Sweden)

Niks Irene MW

2013-02-01

Full Text Available Abstract Background It is well-known that health care workers in today’s general hospitals have to deal with high levels of job demands, which could have negative effects on their health, well-being, and job performance. A way to reduce job-related stress reactions and to optimize positive work-related outcomes is to raise the level of specific job resources and opportunities to recover from work. However, the question remains how to translate the optimization of the balance between job demands, job resources, and recovery opportunities into effective workplace interventions. The aim of the DISCovery project is to develop and implement tailored work-oriented interventions to improve health, well-being, and performance of health care personnel. Methods/Design A quasi-experimental field study with a non-equivalent control group pretest-posttest design will be conducted in a top general hospital. Four existing organizational departments will provide both an intervention and a comparison group. Two types of research methods are used: (1 a longitudinal web-based survey study, and (2 a longitudinal daily diary study. After base-line measures of both methods, existing and yet to be developed interventions will be implemented within the experimental groups. Follow-up measurements will be taken one and two years after the base-line measures to analyze short-term and long-term effects of the interventions. Additionally, a process evaluation and a cost-effectiveness analysis will be carried out. Discussion The DISCovery project fulfills a strong need for theory-driven and scientifically well-performed research on job stress and performance interventions. It will provide insight into (1 how a balance between job demands, job resources, and recovery from work can be optimized, (2 the short-term and long-term effects of tailored work-oriented effects, and (3 indicators for successful or unsuccessful implementation of interventions.

Project-Based Learning and Design-Focused Projects to Motivate Secondary Mathematics Students

Science.gov (United States)

Remijan, Kelly W.

2017-01-01

This article illustrates how mathematics teachers can develop design-focused projects, related to project-based learning, to motivate secondary mathematics students. With first-hand experience as a secondary mathematics teacher, I provide a series of steps related to the engineering design process, which are helpful to teachers in developing…

Assessment and prevention of acute health effects of weather conditions in Europe, the PHEWE project: background, objectives, design

Directory of Open Access Journals (Sweden)

Anderson Hugh

2007-04-01

Full Text Available Abstract Background The project "Assessment and prevention of acute health effects of weather conditions in Europe" (PHEWE had the aim of assessing the association between weather conditions and acute health effects, during both warm and cold seasons in 16 European cities with widely differing climatic conditions and to provide information for public health policies. Methods The PHEWE project was a three-year pan-European collaboration between epidemiologists, meteorologists and experts in public health. Meteorological, air pollution and mortality data from 16 cities and hospital admission data from 12 cities were available from 1990 to 2000. The short-term effect on mortality/morbidity was evaluated through city-specific and pooled time series analysis. The interaction between weather and air pollutants was evaluated and health impact assessments were performed to quantify the effect on the different populations. A heat/health watch warning system to predict oppressive weather conditions and alert the population was developed in a subgroup of cities and information on existing prevention policies and of adaptive strategies was gathered. Results Main results were presented in a symposium at the conference of the International Society of Environmental Epidemiology in Paris on September 6th 2006 and will be published as scientific articles. The present article introduces the project and includes a description of the database and the framework of the applied methodology. Conclusion The PHEWE project offers the opportunity to investigate the relationship between temperature and mortality in 16 European cities, representing a wide range of climatic, socio-demographic and cultural characteristics; the use of a standardized methodology allows for direct comparison between cities.

Mobile health units. Design and implementation considerations.

Science.gov (United States)

Murphy, D C; Klinghoffer, I; Fernandez-Wilson, J B; Rosenberg, L

2000-11-01

The decision to provide health care services with a mobile van is one which educational and service facilities are increasingly pursuing. The benefits include: The potential to increase the availability of services to underserved populations where access to care is perceived to be one reason for underuse of available services. The opportunity to increase and broaden the educational experiences of students in a training program. The opportunity to develop a sense of social responsibility in the health care provider. The process of deciding to pursue a van purchase is complicated, and administrators may best be served by obtaining experienced consultants to help them fully comprehend the issues involved. After the decision to purchase a mobile unit is made, it is necessary to focus on van requirements and design to meet federal, state, and city codes concerning motor vehicles and health requirements. Some modifications of one's standard practices are needed because of these codes. Being aware of them in advance will allow a smooth project completion. This article provides information about some of the steps required to implement a mobile unit. The approximate time from initial concept to van delivery was 1 year, with one fully dedicated project coordinator working to assure the project's success in such a short time frame. Seeing the gratified personnel and students who serve the children on the "Smiling Faces, Going Places" Mobile Dental Van of the NYUCD (see Figure 2), and knowing the children would otherwise not have received such services, allows the health care professionals involved to feel the development of this van is an exciting mechanism for delivery of health care to individuals who would otherwise go without.

Doing the Project and Learning the Content: Designing Project-Based Science Curricula for Meaningful Understanding

Science.gov (United States)

Kanter, David E.

2010-01-01

Project-based science curricula can improve students' usable or meaningful understanding of the science content underlying a project. However, such curricula designed around "performances" wherein students design or make something do not always do this. We researched ways to design performance project-based science curricula (pPBSc) to better…

Beyond tokenistic participation: using representational artefacts to enable meaningful public participation in health service design.

Science.gov (United States)

Morrison, Cecily; Dearden, Andy

2013-10-01

A number of recent policies promote public participation in health service design. Yet, a growing literature has articulated a gap between policy aims and actual practice resulting in public participation becoming tokenistic. Drawing on theory from participatory design, we argue that choosing appropriate artefacts to act as representations can structure discussions between public participants and health professionals in ways that both groups find meaningful and valid. Through a case study of a service improvement project in outpatient services for older people, we describe three representational artefacts: emotion maps, stories, and tracing paper, and explain how they helped to mediate interactions between public participants and health professionals. We suggest that using such representational artefacts can provide an alternative approach to participation that stands in contrast to the current focus on the professionalisation of public participants. We conclude that including participatory designers in projects, to chose or design appropriate representational artefacts, can help to address the policy-practice gap of including public participants in health service design. Copyright © 2013 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Research oriented projects on design themese

DEFF Research Database (Denmark)

Tollestrup, Christian; Eriksen, Kaare; Ovesen, Nis

2011-01-01

How can design students do research-oriented projects about design themes? At the 3rd semester at the Industrial Design Master Program at Aalborg University this is done by taking research oriented learning objectives on design theories and methods and combining them with experimental case studie...... and professional self-reflection amongst students are improved....

The Healy Clean Coal Project: Design verification tests

International Nuclear Information System (INIS)

Guidetti, R.H.; Sheppard, D.B.; Ubhayakar, S.K.; Weede, J.J.; McCrohan, D.V.; Rosendahl, S.M.

1993-01-01

As part of the Healy Clean Coal Project, TRW Inc., the supplier of the advanced slagging coal combustors, has successfully completed design verification tests on the major components of the combustion system at its Southern California test facility. These tests, which included the firing of a full-scale precombustor with a new non-storage direct coal feed system, supported the design of the Healy combustion system and its auxiliaries performed under Phase 1 of the project. Two 350 million BTU/hr combustion systems have been designed and are now ready for fabrication and erection, as part of Phase 2 of the project. These systems, along with a back-end Spray Dryer Absorber system, designed and supplied by Joy Technologies, will be integrated with a Foster Wheeler boiler for the 50 MWe power plant at Healy, Alaska. This paper describes the design verification tests and the current status of the project

Design of a projection display screen with vanishing color shift for rear-projection HDTV

Science.gov (United States)

Liu, Xiu; Zhu, Jin-lin

1996-09-01

Using bi-convex cylinder lens with matrix structure, the transmissive projection display screen with high contrast and wider viewing angle has been widely used in large rear projection TV and video projectors, it obtained a inhere color shift and puzzled the designer of display screen for RGB projection tube in-line adjustment. Based on the method of light beam racing, the general software of designing projection display screen has been developed and the computer model of vanishing color shift for rear projection HDTV has bee completed. This paper discussed the practical designing method to vanish the defect of color shift and mentioned the relations between the primary optical parameters of display screen and relative geometry sizes of lens' surface. The distributions of optical gain to viewing angle and the influences on engineering design are briefly analyzed.

Various advanced design projects promoting engineering education

Science.gov (United States)

1994-01-01

The Universities Space Research Association (USRA) Advanced Design Program (ADP) program promotes engineering education in the field of design by presenting students with challenging design projects drawn from actual NASA interests. In doing so, the program yields two very positive results. Firstly, the students gain a valuable experience that will prepare them for design problems with which they will be faced in their professional careers. Secondly, NASA is able to use the work done by students as an additional resource in meeting its own design objectives. The 1994 projects include: Universal Test Facility; Automated Protein Crystal Growth Facility; Stiffening of the ACES Deployable Space Boom; Launch System Design for Access to Space; LH2 Fuel Tank Design for SSTO Vehicle; and Feed System Design for a Reduced Pressure Tank.

Project Design Concept for Monitoring and Control System

International Nuclear Information System (INIS)

MCGREW, D.L.

2000-01-01

This Project Design Concept represents operational requirements established for use in design the tank farm Monitoring and Control System. These upgrades are included within the scope of Project W-314, Tank Farm Restoration and Safe Operations

Impact of Construction Health & Safety Regulations on Project ...

African Journals Online (AJOL)

Impact of Construction Health & Safety Regulations on Project Parameters in Nigeria: Consultants and Contractors View. ... The study recommends that better attention is given to health and safety should as a project parameter and that related practice notes and guidelines should be evolved for all project stakeholders.

Empowerment in the process of health messaging for rural low-income mothers: an exploratory message design project.

Science.gov (United States)

Aldoory, Linda; Braun, Bonnie; Maring, Elisabeth Fost; Duggal, Mili; Briones, Rowena Lynn

2015-01-01

Rural, low-income mothers face challenges to their health equal to or greater than those of low-income mothers from urban areas. This study put health message design into the hands of low-income rural mothers. The current study filled a research gap by analyzing a participatory process used to design health messages tailored to the everyday lives of rural low-income mothers. A total of forty-three mothers participated in nine focus groups, which were held from 2012 to 2013, in eight states. The mothers were from different racial and ethnic backgrounds. Participants discussed food security, physical activity, and oral health information. They created messages by considering several elements: visuals, length of message, voice/perspective, self-efficacy and personal control, emotional appeals, positive and negative reinforcements, and steps to health behavior change. This study was innovative in its focus on empowerment as a key process to health message design.

The ECHI project: health indicators for the European Community.

Science.gov (United States)

Kramers, Pieter G N

2003-09-01

Within the EU Health Monitoring Programme (HMP), the ECHI project has proposed a comprehensive list of 'European Community Health Indicators'. In the design of the indicator set, a set of explicit criteria was applied. These included: i) be comprehensive and coherent, i.e. cover all domains of the public health field; ii) take account of earlier work, especially that by WHO-Europe, OECD and Eurostat; and iii) cover the priority areas that Member States and Community health policies currently pursue. Flexibility is an important characteristic of the present proposal. In ECHI, this has been emphasized by the definition of 'user-windows'. These are subsets from the overall indicator list, each of which should reflect a specific user's requirement or interest. The proposed indicators are, in most cases, defined as generic indicators, i.e. their actual operational definitions have not yet been attempted. This work has been, and is being carried out to a large part by other projects financed under the HMP, which cover specific areas of public health or areas of data collection. Apart from indicators covered by regularly available data, indicators (or issues) have been proposed for which data are currently difficult to collect but which from a policy point of view would be needed. All this points to the fact that establishing an indicator list which is actually used by Member States is a continuously developing process. This process is now continued by the first strand of the new EU Public Health Action Programme.

The human early-life exposome (HELIX): project rationale and design.

Science.gov (United States)

Vrijheid, Martine; Slama, Rémy; Robinson, Oliver; Chatzi, Leda; Coen, Muireann; van den Hazel, Peter; Thomsen, Cathrine; Wright, John; Athersuch, Toby J; Avellana, Narcis; Basagaña, Xavier; Brochot, Celine; Bucchini, Luca; Bustamante, Mariona; Carracedo, Angel; Casas, Maribel; Estivill, Xavier; Fairley, Lesley; van Gent, Diana; Gonzalez, Juan R; Granum, Berit; Gražulevičienė, Regina; Gutzkow, Kristine B; Julvez, Jordi; Keun, Hector C; Kogevinas, Manolis; McEachan, Rosemary R C; Meltzer, Helle Margrete; Sabidó, Eduard; Schwarze, Per E; Siroux, Valérie; Sunyer, Jordi; Want, Elizabeth J; Zeman, Florence; Nieuwenhuijsen, Mark J

2014-06-01

Developmental periods in early life may be particularly vulnerable to impacts of environmental exposures. Human research on this topic has generally focused on single exposure-health effect relationships. The "exposome" concept encompasses the totality of exposures from conception onward, complementing the genome. The Human Early-Life Exposome (HELIX) project is a new collaborative research project that aims to implement novel exposure assessment and biomarker methods to characterize early-life exposure to multiple environmental factors and associate these with omics biomarkers and child health outcomes, thus characterizing the "early-life exposome." Here we describe the general design of the project. In six existing birth cohort studies in Europe, HELIX will estimate prenatal and postnatal exposure to a broad range of chemical and physical exposures. Exposure models will be developed for the full cohorts totaling 32,000 mother-child pairs, and biomarkers will be measured in a subset of 1,200 mother-child pairs. Nested repeat-sampling panel studies (n = 150) will collect data on biomarker variability, use smartphones to assess mobility and physical activity, and perform personal exposure monitoring. Omics techniques will determine molecular profiles (metabolome, proteome, transcriptome, epigenome) associated with exposures. Statistical methods for multiple exposures will provide exposure-response estimates for fetal and child growth, obesity, neurodevelopment, and respiratory outcomes. A health impact assessment exercise will evaluate risks and benefits of combined exposures. HELIX is one of the first attempts to describe the early-life exposome of European populations and unravel its relation to omics markers and health in childhood. As proof of concept, it will form an important first step toward the life-course exposome.

Mapping and industrial IT project to a 2nd semester design-build project

DEFF Research Database (Denmark)

Nyborg, Mads; Høgh, Stig

2010-01-01

CDIO means bringing the engineer's daily life and working practice into the educational system. In our opinion this is best done by selecting an appropriate project from industry. In this paper we describe how we have mapped an industrial IT project to a 2nd semester design-build project in the D......CDIO means bringing the engineer's daily life and working practice into the educational system. In our opinion this is best done by selecting an appropriate project from industry. In this paper we describe how we have mapped an industrial IT project to a 2nd semester design-build project...... in the Diploma IT program at the Technical University of Denmark. The system in question is a weighing system operating in a LAN environment. The system is used in the medical industry for producing tablets. We present the design of a curriculum to support the development of major components of the weighing...... system. A simple teaching model for software engineering is presented which combines technical disciplines with disciplines from section 2-4 in the CDIO syllabus. The implementation of a joint project involving several courses supports the CDIO perspective. Already the traditional IT-diploma education...

Designing and Implementing a Unique Website Design Project in an Undergraduate Course

Science.gov (United States)

Kontos, George

2016-01-01

The following paper describes a distinctive collaborative service-learning project done in an undergraduate class on web design. In this project, students in a web design class contacted local community non-profit organizations to create websites (collections of web pages) to benefit these organizations. The two phases of creating a website,…

Adapt! – Agile Project Management Supported by Axiomatic Design

Directory of Open Access Journals (Sweden)

Weber Jakob

2017-01-01

Full Text Available This paper presents a novel approach for the use of Axiomatic Design Theory in combination with agile project management methods like Scrum for an effective, structured and combined product design and development process. Agile project management methods give a guideline how to manage a project, but there is only minor assistance regarding the actual product development process itself. Axiomatic Design can be used to support these methods in this point. In concrete terms, the results of the decomposition process of this theory can be used to formulate and structure the work packages for the agile project managing process. The Independence Axiom of Axiomatic Design Theory has a substantial contribution by ensuring the independence of the work packages which can be assigned to different project team members and can be processed independently by them. The combination of the different methods not only helps to ensure a good design solution but also helps to work more agile within a project team. The here proposed approach is one part of a holistic product design and development process for changeable production units – called Adapt! – and is described within a use case in the automotive sector.

Using design science and artificial intelligence to improve health communication: ChronologyMD case example.

Science.gov (United States)

Neuhauser, Linda; Kreps, Gary L; Morrison, Kathleen; Athanasoulis, Marcos; Kirienko, Nikolai; Van Brunt, Deryk

2013-08-01

This paper describes how design science theory and methods and use of artificial intelligence (AI) components can improve the effectiveness of health communication. We identified key weaknesses of traditional health communication and features of more successful eHealth/AI communication. We examined characteristics of the design science paradigm and the value of its user-centered methods to develop eHealth/AI communication. We analyzed a case example of the participatory design of AI components in the ChronologyMD project intended to improve management of Crohn's disease. eHealth/AI communication created with user-centered design shows improved relevance to users' needs for personalized, timely and interactive communication and is associated with better health outcomes than traditional approaches. Participatory design was essential to develop ChronologyMD system architecture and software applications that benefitted patients. AI components can greatly improve eHealth/AI communication, if designed with the intended audiences. Design science theory and its iterative, participatory methods linked with traditional health communication theory and methods can create effective AI health communication. eHealth/AI communication researchers, developers and practitioners can benefit from a holistic approach that draws from theory and methods in both design sciences and also human and social sciences to create successful AI health communication. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Information and Communications Technologies Health Projects in Panama: A Systematic Review and their Relation with Public Policies.

Science.gov (United States)

Sánchez, Gema Anabel Castillo; Berbey, Aranzazu; de la Torre-Díez, Isabel; López-Coronado, Miguel

2017-07-01

This paper presents a review about Information and Communications Technologies (ICTs) health projects in Panama. The main contribution is to provide a vision of the situation in Panama, allowing an understanding of the dynamics of health policies and how they have affected the implementation of ICT's Projects to improve the health of Panamanians. We analyze the projects found with ICT's in health of Panama, which allow us to see a perspective of projects information is obtained from 2000 to 2016, however it is important to highlight that there may be other projects that we do not know because we did not find enough information or evidence of the same. That is why this review has interviews with key personnel, who have guided us with the search for information. 56% of technology projects are concentrated in the capital city and only 16% in the province of Chiriquí. 64% of these projects are focused on the development of information systems, mainly focused on electronic patient registration. And 60% refers to projects related to primary health care. The MINSA and CSS both with a 20% participation in ICT project, in addition we can notice the dispersion of projects for hospitals, where each one is developing programs per their needs or priorities. The national information about ICT projects of Health, it has been notorious the state of dispersion and segmented of public health information. We consider that it is a natural consequence of Policy in Panamanian Health System. This situation limits the information retrieval and knowledge of ICT in Health of Panama. To stakeholders, this information is directed so that health policies are designed towards a more effective and integral management, administering the ICT's as tools for the well-being of most the Panamanian population, including indigenous group.

Knowledge management in design teams using a project website

NARCIS (Netherlands)

Otter, den A.F.H.J.; Lima, C.P

2007-01-01

In this paper the sharing of knowledge in architectural design teams using a Project Website is discussed. The results of multiple case studies, being part of a recently finished PhD research project to communication and performance of design teams using a Project Website, show that systems for

Project Design Concept - Primary Ventilation System

International Nuclear Information System (INIS)

MCGREW, D.L.

2000-01-01

Tank Farm Restoration and Safe Operation (TFRSO), Project W-3 14 was established to provide upgrades that would improve the reliability and extend the system life of portions of the waste transfer, electrical, ventilation, instrumentation and control systems for the Hanford Site Tank Farms. An assessment of the tank farm system was conducted and the results are documented in system assessment reports. Based on the deficiencies identified in the tank farm system assessment reports, and additional requirements analysis performed in support of the River Protection Project (RPP), an approved scope for the TFRSO effort was developed and documented in the Upgrade Scope Summary Report (USSR), WHC-SD-W314-RPT-003, Rev. 4. The USSR establishes the need for the upgrades and identifies the specific equipment to be addressed by this project. This Project Design Concept (PDC) is in support of the Phase 2 upgrades and provides an overall description of the operations concept for the W-314 Primary Ventilation Systems. Actual specifications, test requirements, and procedures are not included in this PDC. The PDC is a ''living'' document, which will be updated throughout the design development process to provide a progressively more detailed description of the W-314 Primary Ventilation Systems design. The Phase 2 upgrades to the Primary Ventilation Systems shall ensure that the applicable current requirements are met for: Regulatory Compliance; Safety; Mission Requirements; Reliability; and Operational Requirements

Project Management in Instructional Design: ADDIE Is Not Enough

Science.gov (United States)

Van Rooij, Shahron Williams

2010-01-01

In the digital age, instructional designers must possess both a sound instructional design knowledge base and solid project management skills that will enable them to complete courseware projects on time, on budget and in conformance with client expectations. Project management skills include the ability to apply repeatable processes, along with…

Design project management mode as the introduction

International Nuclear Information System (INIS)

Zhang Xiaoping

2014-01-01

This article consider nuclear power plant's current design schedule management mode as the introduction, analysis of current management in-depth, summed up the advantage and disadvantage of the existing management mode. It makes use of mature closed loop cycle project management, and submits progress tracking model assumptions. It also introduces the purpose and background of the progress automation model, the theoretical assumptions of the model, the design criteria and evaluation system of indicators of progress. Based on the achievement process model, this article mainly discusses the specific processes and key points of the project closed loop cycle, and the improvement of the process of project management. (author)

Partners in projects: preparing for public involvement in health and social care research.

Science.gov (United States)

Parkes, Jacqueline H; Pyer, Michelle; Wray, Paula; Taylor, Jane

2014-09-01

In recent years, several UK and, international funders of health and social care related research have adopted the policy of requiring explicit evidence of the 'public' voice in all aspects of project design. For many academic researchers engaged within research, evaluations or audit projects, this formal requirement to actively engage members of the public will present them with both benefits and challenges to securing knowledgeable, skilled, and confident lay representation onto project teams. This could potentially lead to the exploitation of those individuals who are available, appropriately informed, and adequately prepared for such activities. Currently, much of the preparation of patients or members of the public for research involvement tends to be aligned to specific projects; however, with the call for greater active and meaningful involvement of lay representatives in future national and international funding applications, there is clearly a growing need to 'train' sufficient numbers of confident and competent representatives to meet this growing demand. This paper describes the development of a specifically designed research awareness training programme and underpinning theoretical model, which has been specifically designed to support active and meaningful lay involvement in research, evaluations and audit projects. Developed over a four year period, the course is a culmination of learning extracted from a series of four completed research projects, which have incorporated an element of public and patient involvement (PPI) training in their overall design. Crown Copyright © 2014. Published by Elsevier Ireland Ltd. All rights reserved.

A Symbiosis between Instructional Systems Design and Project Management

Science.gov (United States)

Pan, Cheng-Chang

2012-01-01

This study is intended to explore a complementary relationship between instructional systems design (ISD) and project management in an attempt to build a plausible case for integrating project management as a distinct course in the core of the graduate instructional systems design programs. It is argued that ISD and project management should form…

Project X: Accelerator Reference Design

Energy Technology Data Exchange (ETDEWEB)

Holmes, Stephen D. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

2013-06-20

Project X is a high-intensity proton facility being developed to support a world-leading program of Intensity Frontier physics over the next two decades at Fermilab. Project X is an integral part of the U.S. Intensity Frontier Roadmap as described in the P5 report of May 2008 [1] and within the Fermilab Strategic Plan of November 2011 [2]. This document represents Part I of the “Project X Book” describing the Project X accelerator facility and the broad range of physics research opportunities enabled by Project X. Parts II and III provide in-depth descriptions of the physics research program, both within and beyond particle physics [3]. The primary elements of the U.S. program to be supported by Project X include: Neutrino Experiments: Experimental studies of neutrino oscillations and neutrino interaction physics with ultra-intense neutrino beams provided by a high-power proton source with energies up to 120 GeV, utilizing near detectors at the Fermilab site and massive detectors at distant underground laboratories. Goal: At least 2 MW of proton beam power at any energy between 60 to 120 GeV; several hundred kW of proton beam power on target at 8 GeV. Kaon, Muon, Nucleon, and Neutron Precision Experiments: World-leading experiments studying ultra-rare kaon decays, searching for muon-to-electron conversion and nuclear electron dipole moments (EDMs), and exploring neutron properties at very high precision. Goal: MW-class proton beams supporting multiple experiments at 1 and 3 GeV, with flexible capability for providing distinct beam formats to concurrent users while allowing simultaneous operations with the neutrino program. Material Science and Nuclear Energy Applications: High-intensity accelerator, spallation, target and transmutation technology demonstrations will provide critical input into the design of future energy systems, including next generation fission reactors, nuclear waste transmutation systems and future thorium fuel-cycle power systems. Possible

Investigation of the Relationship between Green Design and Project Delivery Methods

Energy Technology Data Exchange (ETDEWEB)

Bilec, Melissa M.; Ries, Robert J.

2008-04-24

The selection of the project delivery method (PDM) for any project is critical--it establishes communication, coordination, and contractual issues between the owner, contractor, and designer. With an increase in the number of green design projects, understanding the relationship between the PDM and green design is paramount to project and contract management. It is reasonable to assume that a positive relationship between green design and design-build (DB) exists since both theoretically are intended to foster an integrated, holistic, and collaborative project. This research examines the relationship between the design-bid-build (DBB), construction management (CM), and DB PDMs and green design with the goal of establishing best practices and identifying potential synergies between them. The research collected information by conducting primarily telephone interviews with approximately twenty-five individuals, including owners, contractors, and designers involved in completed green design projects, mainly in the public sector. The interviews developed a general understanding of the current state of knowledge and experience and not a rigorous quantitative analysis. Upon completion of the interviews, the tabulated results were summarized and green project characteristics and project-PDM interactions emerged. Existing published research was evaluated to reveal aspects of PDMs independent of green design. Best practices were ascertained by combining information from the interviews and published research. Best practices are as follows: (1) Project implementation features--The decision to use DB as PDM on green design or other projects should be based on the specific project features; e.g., well-defined scope and adequate owner staffing. DB will not produce successful results on all projects. (2) Collaboration--Project team collaboration early in the design and construction process is an important aspect of green projects, and collaboration was considered somewhat more

Core designs of modern VVER projects

International Nuclear Information System (INIS)

Vasilchenko, I.; Kushmanov, S.; Vjalitsyn, V.; Vasilchenko, R.

2015-01-01

The presented operational experience of TVS - 2M (pilot-commercial operation started in 2006 at Balakovo NPP -1) enables to use it as reference for new projects because of similarity in designs and operational conditions. In the paper main parameters of fuel cycles, stability to impact of damaging factors, pilot operation of MG, new alloys, ADF and NTMC, upgrade of FA - 2M for the further power uprating, profiling of Gd-fuel rods for 18-month Fuel Cycle (FC) and perfection of absorber element design are the discussed issues. At the end author concluded that: 1) Core designs of new projects AES-2006 and VVER-TOI are based on extensive successful operational experience of the close prototype of TVS - 2M. 2) All improvements both of technical and economic parameters of fuel are subjected to representative examination by pilot operation at the power units with VVER-1000 being close prototypes of new designs

Influence of ergonomic design on trackless mining machines on the health and safety of the operators, drivers and workers.

CSIR Research Space (South Africa)

Mason, S

1998-07-01

Full Text Available The project has produced information and methodologies for use by designers, mine managers and engineers to improve the health and safety associated with the use of trackless vehicles in mines. The project deliverables focus on assisting; designers...

Design management of general contractor under nuclear power project EPC mode

International Nuclear Information System (INIS)

Su Shaojian

2013-01-01

Design management has not yet formed a theoretical system recognized, general contractor design managers under nuclear power project EPC Mode lack the clear theory basis. This paper aims to discuss Design management from the angle of general contractor under nuclear power project EPC mode, Gives the concept of design management Clearly, by Combining the characteristics of nuclear power project, Gives the specific content and meaning of the design management of nuclear power project. (authors)

Promoting Health Literacy through the Health Education Assessment Project

Science.gov (United States)

Marx, Eva; Hudson, Nancy; Deal, Tami B.; Pateman, Beth; Middleton, Kathleen

2007-01-01

Background: The Council of Chief State School Officers' State Collaborative on Assessment and Student Standards Health Education Assessment Project (SCASS-HEAP) allows states to pool financial and human resources to develop effective ready-to-use health education assessment resources through a collaborative process. The purpose of this article is…

Business System Planning Project, Preliminary System Design

International Nuclear Information System (INIS)

EVOSEVICH, S.

2000-01-01

CH2M HILL Hanford Group, Inc. (CHG) is currently performing many core business functions including, but not limited to, work control, planning, scheduling, cost estimating, procurement, training, and human resources. Other core business functions are managed by or dependent on Project Hanford Management Contractors including, but not limited to, payroll, benefits and pension administration, inventory control, accounts payable, and records management. In addition, CHG has business relationships with its parent company CH2M HILL, U.S. Department of Energy, Office of River Protection and other River Protection Project contractors, government agencies, and vendors. The Business Systems Planning (BSP) Project, under the sponsorship of the CH2M HILL Hanford Group, Inc. Chief Information Officer (CIO), have recommended information system solutions that will support CHG business areas. The Preliminary System Design was developed using the recommendations from the Alternatives Analysis, RPP-6499, Rev 0 and will become the design base for any follow-on implementation projects. The Preliminary System Design will present a high-level system design, providing a high-level overview of the Commercial-Off-The-Shelf (COTS) modules and identify internal and external relationships. This document will not define data structures, user interface components (screens, reports, menus, etc.), business rules or processes. These in-depth activities will be accomplished at implementation planning time

Community participation in primary health care projects of the Muldersdrift Health and Development Programme

Directory of Open Access Journals (Sweden)

M. Barker

2007-09-01

Full Text Available After numerous teething problems (1974-1994, the Department of Nursing Education of WITS University took responsibility for the Muldersdrift Health and Development Programme (MHDP. The nursing science students explored and implemented an empowerment approach to community participation. The students worked with MHDP health workers to improve health through community participation, in combination with primary health care (PHC activities and the involvement of a variety of community groups. As the PHC projects evolved overtime, the need arose to evaluate the level of community participation and how much community ownership was present over decision-making and resources. This led to the question “What was the level of community participation in PHC projects of the MHDP?” Based on the question the following objectives were set, i.e. i to evaluate the community participation in PHC initiatives; ii to provide the project partners with motivational affirmation on the level of community participation criteria thus far achieved; iii to indicate to participants the mechanisms that should still be implemented if they wanted to advance to higher levels of community participation; iv to evaluate the MHDP’s implementation of a people-centred approach to community participation in PHC; and v the evaluation of the level of community participation in PHC projects in the MHDP. An evaluative, descriptive, contextual and quantitative research design was used. Ethical standards were adhered to throughout the study. The MHDP had a study population of twentythree (N=23 PHC projects. A purposive sample of seven PHC initiatives was chosen according to specific selection criteria and evaluated according to the “Criteria to evaluate community participation in PHC projects” instrument (a quantitative tool. Structured group interviews were done with PHC projects’ executive committee members. The Joint Management Committee’s data was collected through mailed

[Outcomes evaluation of the school staff health promotion project].

Science.gov (United States)

Woynarowska-Sołdan, Magdalena

This article presents selected outcomes of a 3-year project "Health promotion of school staff in health-promoting schools," as well as the achievements and difficulties in its implementation. The research was conducted on 644 teachers and 226 members of non-teaching staff in 21 schools. The method involved opinion poll and authored questionnaires. A 2-part model of outcome evaluation was developed. Most participants appreciated the changes that took place within the 3 years of the project implementation. These included the improved level of their knowledge about health, health-conducive behaviors (62-93%) and the physical and social environment of the school (50-92%). Changes were more frequently acknowledged by teachers. About 80% of the participants had a positive attitude to the project, but only 20% assessed their involvement as considerable. About 90% believed that health promotion activities should be continued. According to the project leaders, insufficient support and financial resources, and difficulties in motivating school employees, particularly the nonteaching staff, to undertake health-promotion activities were the major handicaps in the project implementation. The project outcomes can be assessed as satisfying. They revealed that it is posssible to initiate health promotion among school staff. This can be effective on condition that participants are motivated, actively engaged in the project and supported by the head teacher and the local community. Necessarily, school leaders should be prepared to promote health among adults and to gain support from school policy decision makers, school administration, trade unions and universities involved in teacher training. Med Pr 2016;67(2):187-200. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Outcomes evaluation of the school staff health promotion project

Directory of Open Access Journals (Sweden)

Magdalena Woynarowska-Sołdan

2016-04-01

Full Text Available Background: This article presents selected outcomes of a 3-year project “Health promotion of school staff in health-promoting schools,” as well as the achievements and difficulties in its implementation. Material and Methods: The research was conducted on 644 teachers and 226 members of non-teaching staff in 21 schools. The method involved opinion poll and authored questionnaires. A 2-part model of outcome evaluation was developed. Results: Most participants appreciated the changes that took place within the 3 years of the project implementation. These included the improved level of their knowledge about health, health-conducive behaviors (62–93% and the physical and social environment of the school (50–92%. Changes were more frequently acknowledged by teachers. About 80% of the participants had a positive attitude to the project, but only 20% assessed their involvement as considerable. About 90% believed that health promotion activities should be continued. According to the project leaders, insufficient support and financial resources, and difficulties in motivating school employees, particularly the nonteaching staff, to undertake health-promotion activities were the major handicaps in the project implementation. Conclusions: The project outcomes can be assessed as satisfying. They revealed that it is posssible to initiate health promotion among school staff. This can be effective on condition that participants are motivated, actively engaged in the project and supported by the head teacher and the local community. Necessarily, school leaders should be prepared to promote health among adults and to gain support from school policy decision makers, school administration, trade unions and universities involved in teacher training. Med Pr 2016;67(2:187–200

Student design projects in applied acoustics.

Science.gov (United States)

Bös, Joachim; Moritz, Karsten; Skowronek, Adam; Thyes, Christian; Tschesche, Johannes; Hanselka, Holger

2012-03-01

This paper describes a series of student projects which are intended to complement theoretical education in acoustics and engineering noise control with practical experience. The projects are also intended to enhance the students' ability to work in a team, to manage a project, and to present their results. The projects are carried out in close cooperation with industrial partners so that the students can get a taste of the professional life of noise control engineers. The organization of such a project, its execution, and some of the results from the most recent student project are presented as a demonstrative example. This latest project involved the creation of noise maps of a production hall, the acoustic analysis of a packaging machine, and the acoustic analysis of a spiral vibratory conveyor. Upon completion of the analysis, students then designed, applied, and verified some simple preliminary noise reduction measures to demonstrate the potential of these techniques. © 2012 Acoustical Society of America

Active Learning by Design: An Undergraduate Introductory Public Health Course

Directory of Open Access Journals (Sweden)

Karin eYeatts

2014-12-01

Full Text Available Principles of active learning were used to design and implement an introductory public health course. Students were introduced to the breadth and practice of public health through team and individual-based activities. Team assignments covered topics in epidemiology, biostatistics, health behavior, nutrition, maternal and child health, environment, and health policy. Students developed an appreciation of the population perspective through an experience trip and related intervention project in a public health area of their choice. Students experienced several key critical component elements of a public health undergraduate major; they cover key public health domains, experience public health practice, and integrated concepts with their assignments. In this paper, course assignments, lessons learned, and student successes are described. Given the increased growth in the undergraduate public health major, these active learning assignments may be of interest to undergraduate public health programs at both liberal arts colleges and research universities.

FACTORS AFFECTING EFFICIENT CONSTRUCTION PROJECT DESIGN DEVELOPMENT: A PERSPECTIVE FROM INDIA

Directory of Open Access Journals (Sweden)

Devanshu Pandit

2015-12-01

Full Text Available Internationally projects exhibit time and cost overrun. It is observed that problems during design development contribute significantly to delays. In India, projects undertaken by government were largely planned and designed by departmental planners and engineers. However, after globalization, projects have increased in number resulting in design outsourcing, but with attendant challenges. The paper is aimed at identifying and analysing factors in the design development phase that can have impact on project success. 30 factors related to design development were identified through two separate brainstorming sessions. A questionnaire was then administered to determine importance ranking of these factors. Relative importance index (RII was used to prioritise these factors. Top ten factors in design development identified using RII include structural design parameters, soil investigations, design quality control, topographic survey, and architectural design parameters. The results can help firms improve their design development practices by prioritising activities that could have more impact on project performance.

The role of health-related claims and health-related symbols in consumer behaviour: Design and conceptual framework of the CLYMBOL project and initial results

OpenAIRE

Hieke, S; Kuljanic, N; Wills, J M; Pravst, I; Kaur, A; Raats, M M; van Trijp, H C M; Verbeke, W; Grunert, K G

2015-01-01

Health claims and symbols are potential aids to help consumers identify foods that are healthier options. However, little is known as to how health claims and symbols are used by consumers in real-world shopping situations, thus making the science-based formulation of new labelling policies and the evaluation of existing ones difficult. The objective of the European Union-funded project R ole of health-related?CLaims?and?sYMBOLs?in consumer behaviour (CLYMBOL) is to determine how health-relat...

The School Children Mental Health in Europe (SCMHE) Project: Design and First Results.

Science.gov (United States)

Kovess, Viviane; Carta, Mauro Giovanni; Pez, Ondine; Bitfoi, Adina; Koç, Ceren; Goelitz, Dietmar; Kuijpers, Rowella; Lesinskiene, Sigita; Mihova, Zlatka; Otten, Roy

2015-01-01

Background : The School Children Mental Health in Europe (SCMHE) project aims to build up a set of indicators to collect and monitor children's mental health in an efficient and comparable methodology across the EU countries. It concerns primary schools children aged 6 to 11 years a range where few data are available whereas school interventions are promising. Methods : Three informants were used: parents, teachers and children. In selecting instruments language, instruments were selected according to the easiness to translate them: SDQ (Strengths and Difficulties Questionnaire) for parents and teachers and DI (Dominic Interactive). A two-step procedure was used: schools randomization then six children by class in each grade. Results : 9084 children from seven countries (Italy, Netherlands, Germany, Romania, Bulgaria, Lithuania, and Turkey) completed the Dominic Interactive in their own language. 6563 teachers and 6031 parents completed their questionnaire, and a total of 5574 interviews have been completed by the 3 informants. The participation rate of the children with parents in the participating schools was about 66.4%. As expected teachers report more externalised problems and less internalised problems than parents. Children report more internalised problems than parents and teachers. Boys have consistently more externalised problems than girls and this is the reverse for internalised problems. Combining the diverse informants and impairment levels children with problems requiring some sort of mental health care were about 9.9%: 76% did not see any mental health professional: 78.7% In Eastern countries 63.1% in Western Europe.

Design, methods and demographics from phase I of Alberta's Tomorrow Project cohort: a prospective cohort profile.

Science.gov (United States)

Robson, Paula J; Solbak, Nathan M; Haig, Tiffany R; Whelan, Heather K; Vena, Jennifer E; Akawung, Alianu K; Rosner, William K; Brenner, Darren R; Cook, Linda S; Csizmadi, Ilona; Kopciuk, Karen A; McGregor, S Elizabeth; Friedenreich, Christine M

2016-01-01

Prospective cohorts have the potential to support multifactorial, health-related research, particularly if they are drawn from the general population, incorporate active and passive follow-up and permission is obtained to allow access by researchers to data repositories. This paper describes Phase I of the Alberta's Tomorrow Project cohort, a broad-based research platform designed to support investigations into factors that influence cancer and chronic disease risk. Adults aged 35-69 years living in Alberta, Canada, with no previous cancer diagnosis other than nonmelanoma skin cancer were recruited to the project by telephone-based random digit dialling. Participants were enrolled if they returned a Health and Lifestyle Questionnaire. Past year diet and physical activity questionnaires were mailed 3 months after enrolment. Consent was sought for active follow-up and linkage with administrative databases. Depending on enrolment date, participants were invited to complete up to 2 follow-up questionnaires (2004 and 2008). Between 2001 and 2009, 31 072 (39% men) participants (mean age 50.2 [± 9.2] yr) were enrolled and 99% consented to linkage with administrative databases. Participants reported a wide range of educational attainment and household income. Compared with provincial surveillance data from the Canadian Community Health Survey, Alberta's Tomorrow Project participants had higher body mass index, lower prevalence of smoking and similar distribution of chronic health conditions. Follow-up questionnaires were completed by 83% and 72% of participants in 2004 and 2008, respectively. Robust quality control measures resulted in low frequencies of missing data. Alberta's Tomorrow Project provides a robust platform, based on a prospective cohort design, to support research into risk factors for cancer and chronic disease.

Parents as Teachers Health Literacy Demonstration project: integrating an empowerment model of health literacy promotion into home-based parent education.

Science.gov (United States)

Carroll, Lauren N; Smith, Sandra A; Thomson, Nicole R

2015-03-01

The Parents as Teachers (PAT) Health Literacy Demonstration project assessed the impact of integrating data-driven reflective practices into the PAT home visitation model to promote maternal health literacy. PAT is a federally approved Maternal, Infant, Early Childhood Home Visiting program with the goal of promoting school readiness and healthy child development. This 2-year demonstration project used an open-cohort longitudinal design to promote parents' interactive and reflective skills, enhance health education, and provide direct assistance to personalize and act on information by integrating an empowerment paradigm into PAT's parent education model. Eight parent educators used the Life Skills Progression instrument to tailor the intervention to each of 103 parent-child dyads. Repeated-measures analysis of variance, paired t tests, and logistic regression combined with qualitative data demonstrated that mothers achieved overall significant improvements in health literacy, and that home visitors are important catalysts for these improvements. These findings support the use of an empowerment model of health education, skill building, and direct information support to enable parents to better manage personal and child health and health care. © 2014 Society for Public Health Education.

Projection models for health-effects assessment in populations exposed to radioactive and nonradioactive pollutants. Volume III. SPAHR interactive package guide

International Nuclear Information System (INIS)

Collins, J.J.

1982-09-01

The Simulation Package for the Analysis of Health Risk (SPAHR) is a computer software package based upon a demographic model for health risk projectons. The model extends several health risk projection models by making realistic assumptions about the population at risk, adn thus represents a distinct improvement over previous models. Complete documentation for use of SPAHR is contained in this five-volume publication. The demographic model in SPAHR estimates population response to environmental toxic exposures. Latency of response, changing dose level over time, competing risks from other causes of death, and population structure can be incorporated into SPAHR to project health risks. Risks are measured by morbid years, number of deaths, and loss of life expectancy. Comparisons of estimates of excess deaths demonstrate that previous health risk projection models may have underestimated excess deaths by a factor of from 2 to 10, depending on the pollutant and the exposure scenario. The software supporting the use of the demographic model is designed to be user oriented. Complex risk projections are made by responding to a series of prompts generated by the package. The flexibility and ease of use of SPAHR make it an important contribution to existing models and software packages. This manual outlines the use of the interactive capabilities of SPAHR. SPAHR is an integrated system of computer programs designed for simulating numerous health risk scenarios using the techniques of demographic modeling. This system of computer programs has been designed to be very flexible so as to allow the user to simulate a large variety of scenarios. It provides the user with an integrated package for projecting the impacts on human health of exposure to various hazards, particularly those resulting from the effluents related to energy production

Conceptual Design Plan SM-43 Replacement Project

Energy Technology Data Exchange (ETDEWEB)

University of California, Los Alamos National Laboratory, SCC Project Office

2000-11-01

The Los Alamos National Laboratory Conceptual Design Plan for the SM-43 Replacement Project outlines plans for replacing the SM-43 Administration Building. Topics include the reasons that replacement is considered a necessity; the roles of the various project sponsors; and descriptions of the proposed site and facilities. Also covered in this proposal is preliminary information on the project schedule, cost estimates, acquisition strategy, risk assessment, NEPA strategy, safety strategy, and safeguards and security. Spreadsheets provide further detail on space requirements, project schedules, and cost estimates.

eHealth for Remote Regions: Findings from Central Asia Health Systems Strengthening Project.

Science.gov (United States)

Sajwani, Afroz; Qureshi, Kiran; Shaikh, Tehniat; Sayani, Saleem

2015-01-01

Isolated communities in remote regions of Afghanistan, Kyrgyz Republic, Pakistan and Tajikistan lack access to high-quality, low-cost health care services, forcing them to travel to distant parts of the country, bearing an unnecessary financial burden. The eHealth Programme under Central Asia Health Systems Strengthening (CAHSS) Project, a joint initiative between the Aga Khan Foundation, Canada and the Government of Canada, was initiated in 2013 with the aim to utilize Information and Communication Technologies to link health care institutions and providers with rural communities to provide comprehensive and coordinated care, helping minimize the barriers of distance and time. Under the CAHSS Project, access to low-cost, quality health care is provided through a regional hub and spoke teleconsultation network of government and non-government health facilities. In addition, capacity building initiatives are offered to health professionals. By 2017, the network is expected to connect seven Tier 1 tertiary care facilities with 14 Tier 2 secondary care facilities for teleconsultation and eLearning. From April 2013 to September 2014, 6140 teleconsultations have been provided across the project sites. Additionally, 52 new eLearning sessions have been developed and 2020 staff members have benefitted from eLearning sessions. Ethics and patient rights are respected during project implementation.

Designing and managing your research project: core skills for social and health research

National Research Council Canada - National Science Library

Thomas, David R; Hodges, Ian

2010-01-01

... for Social and Health Research David R. Thomas and Ian D. Hodges© David R. Thomas and Ian D. Hodges 2010 First published 2010 Apart from any fair dealing for the purposes of research or private study, or criticism or review, as permitted under the Copyright, Designs and Patents Act, 1988, this publication may be reproduced, stored or transmitted in any ...

Designing and Conducting Health Systems Research Projects ...

International Development Research Centre (IDRC) Digital Library (Canada)

Giving girls and women the power to decide. Addressing Africa's unmet need for family planning by intensifying sexual and reproductive and adolescent health research. View moreGiving girls and women the power to decide ...

A Health Care Project Management Office's Strategies for Continual Change and Continuous Improvement.

Science.gov (United States)

Lavoie-Tremblay, Mélanie; Aubry, Monique; Richer, Marie-Claire; Cyr, Guylaine

Health care organizations need project and change management support in order to achieve successful transformations. A project management office (PMO) helps support the organizations through their transformations along with increasing their capabilities in project and change management. The aim of the present study was to extend understanding of the continuous improvement mechanisms used by PMOs and to describe PMO's strategies for continual change and continuous improvement in the context of major transformation in health care. This study is a descriptive case study design with interviews conducted from October to December 2015 with PMO's members (3 managers and 1 director) and 3 clients working with the PMO after a major redevelopment project ended (transition to the new facility). Participants suggested a number of elements including carefully selecting the members of the PMO, having a clear mandate for the PMO, having a method and a discipline at the same time as allowing openness and flexibility, clearly prioritizing projects, optimizing collaboration, planning for everything the PMO will need, not overlooking organizational culture, and retaining the existing support model. This study presents a number of factors ensuring the sustainability of changes.

Design of the DIRECT-project: interventions to increase job resources and recovery opportunities to improve job-related health, well-being, and performance outcomes in nursing homes

Directory of Open Access Journals (Sweden)

Hamers Jan PH

2010-05-01

Full Text Available Abstract Background Because of high demands at work, nurses are at high risk for occupational burnout and physical complaints. The presence of job resources (such as job autonomy or social support and recovery opportunities could counteract the adverse effect of high job demands. However, it is still unclear how job resources and recovery opportunities can be translated into effective workplace interventions aiming to improve employee health, well-being, and performance-related outcomes. The aim of the current research project is developing and implementing interventions to optimize job resources and recovery opportunities, which may lead to improved health, well-being and performance of nurses. Methods/design The DIRECT-project (DIsc Risk Evaluating Controlled Trial is a longitudinal, quasi-experimental field study. Nursing home staff of 4 intervention wards and 4 comparison wards will be involved. Based on the results of a base-line survey, interventions will be implemented to optimize job resources and recovery opportunities. After 12 and 24 month the effect of the interventions will be investigated with follow-up surveys. Additionally, a process evaluation will be conducted to map factors that either stimulated or hindered successful implementation as well as the effectiveness of the interventions. Discussion The DIRECT-project fulfils a strong need for intervention research in the field of work, stress, performance, and health. The results could reveal (1 how interventions can be tailored to optimize job resources and recovery opportunities, in order to counteract job demands, and (2 what the effects of these interventions will be on health, well-being, and performance of nursing staff.

Exploratory Shaft, Phase 1, Project B-314: Title 1 design report system design description

International Nuclear Information System (INIS)

Hanlen, D.F.

1983-01-01

The report describes the project and the project systems, the principal design bases, and principal hazards and project interfaces. This report also contains the Title 1 Estimate Summary. 5 figs., 8 tabs

The Camp Hill Project: Objectives and Design

Science.gov (United States)

Mattingly, John B.

1976-01-01

Available from: EC 090 474. Outlined are the problems and objectives of Pennsylvania's Camp Hill Project--a program designed to complete psychological needs assessments for juveniles incarcerated at Camp Hill, to develop project policies and guidelines in preparation for meeting with juvenile court judges, and to hire staff. (SBH)

Project-induced displacement, secondary stressors, and health.

Science.gov (United States)

Cao, Yue; Hwang, Sean-Shong; Xi, Juan

2012-04-01

It has been estimated that about 15 million people are displaced by development projects around the world each year. Despite the magnitude of people affected, research on the health and other impacts of project-induced displacement is rare. This study extends existing knowledge by exploring the short-term health impact of a large scale population displacement resulting from China's Three Gorges Dam Project. The study is theoretically guided by the stress process model, but we supplement it with Cernea's impoverishment risks and reconstruction (IRR) model widely used in displacement literature. Our panel analysis indicates that the displacement is associated positively with relocatees' depression level, and negatively with their self-rated health measured against a control group. In addition, a path analysis suggests that displacement also affects depression and self-rated health indirectly by changing social integration, socioeconomic status, and community resources. The importance of social integration as a protective mechanism, a factor that has been overlooked in past studies of population displacement, is highlighted in this study. Published by Elsevier Ltd.

The integrated project: a promising promotional strategy for primary health care.

Science.gov (United States)

Daniel, C; Mora, B

1985-10-01

The integrated project using parasite control and nutrition as entry points for family planning practice has shown considerable success in promoting health consciousness among health workers and project beneficiaries. This progress is evident in the Family Planning, Parasite Control and Nutrition (FAPPCAN) areas. The project has also mobilized technical and financial support from the local government as well as from private and civic organizations. The need for integration is underscored by the following considerations: parasite control has proved to be effective for preventive health care; the integrated project uses indigenous community health workers to accomplish its objectives; the primary health care (PHC) movement depends primarily on voluntary community participation and the integrated project has shown that it can elicit this participation. The major health problems in the Philippines are: a prevalence of communicable and other infectious diseases; poor evironmental sanitation; malnutrition; and a rapid population growth rate. The integrated program utilizes the existing village health workers in identifying problems related to family planning, parasite control and nutrition and integrates these activities into the health delivery system; educates family members on how to detect health and health-related problems; works out linkages with government agencies and the local primary health care committee in defining the scope of health-related problems; mobilizes community members to initiate their own projects; gets the commitment of village officials and committe members. The integrated project operates within the PHC. A health van with a built-in video playback system provides educational and logistical support to the village worker. The primary detection and treatment of health problems are part of the village health workers' responsibilities. Research determines the project's capability to reactivate the village primary health care committees and sustain

A projective approach to a language of landscape design

Directory of Open Access Journals (Sweden)

Catherine Ward Thompson

1997-10-01

Full Text Available Building on the work of Kelly (1955 in personal construct psychology, and Peled (1976, I990 in ecoanalysis, this paper develops projective techniques-which use concepts of personal and phenomenological space-as a means for articulating approaches to landscape design. The projective approach involves two stages. In stage one, projective techniques are used to elicit personal constructs (which may be held at a pre-conscious or sub-conscious level, allowing the holistic experience of landscape to be explored. In stage two, using a 'projection location task' derived from the way we experience and construe the regions of our own bodies, elements of these constructs can then be articulated so as to inform the way we interact and engage with the space around us. This gives insight into the meaning of spatial layouts, which can then be translated into a design language for the structural ordering of space. The author draws on original research conducted with children as well as adults, using projective techniques to draw out their desires and needs in relation to designing their landscape environment. The paper discusses the value of such methods for landscape designers and their clients, and outlines some ongoing research to test the validity of the projection location task.

A process model for design team communication within fast-track building projects using project websites

NARCIS (Netherlands)

Otter, den A.F.H.J.; Reymen, I.M.M.J.

2008-01-01

The factor time within building projects is on high pressure because of the increasing need for faster delivery of buildings. Within fast track, complex building projects the design process is an important key. Through case analyses offart-hack design processes it became obvious that process and

Designing and Conducting Health Systems Research Projects ...

International Development Research Centre (IDRC) Digital Library (Canada)

... and field testing (Part 1) and with data analysis and report writing (Part 2). ... New website will help record vital life events to improve access to services for all ... How are public health actors working with the food and drinks industry to ...

A rural virtual health sciences library project: research findings with implications for next generation library services*

OpenAIRE

Richwine, Margaret (Peggy); McGowan, Julie J.

2001-01-01

Purpose: The Shared Hospital Electronic Library of Southern Indiana (SHELSI) research project was designed to determine whether access to a virtual health sciences library and training in its use would support medical decision making in rural southern Indiana and achieve the same level of impact seen by targeted information services provided by health sciences librarians in urban hospitals.

The Tsimane Health and Life History Project: Integrating anthropology and biomedicine.

Science.gov (United States)

Gurven, Michael; Stieglitz, Jonathan; Trumble, Benjamin; Blackwell, Aaron D; Beheim, Bret; Davis, Helen; Hooper, Paul; Kaplan, Hillard

2017-04-01

The Tsimane Health and Life History Project, an integrated bio-behavioral study of the human life course, is designed to test competing hypotheses of human life-history evolution. One aim is to understand the bidirectional connections between life history and social behavior in a high-fertility, kin-based context lacking amenities of modern urban life (e.g. sanitation, banks, electricity). Another aim is to understand how a high pathogen burden influences health and well-being during development and adulthood. A third aim addresses how modernization shapes human life histories and sociality. Here we outline the project's goals, history, and main findings since its inception in 2002. We reflect on the implications of current findings and highlight the need for more coordinated ethnographic and biomedical study of contemporary nonindustrial populations to address broad questions that can situate evolutionary anthropology in a key position within the social and life sciences. © 2017 The Authors Evolutionary Anthropology: Issues, News, and Reviews Published by Wiley Periodicals, Inc.

Projection models for health-effects assessment in populations exposed to radioactive and nonradioactive pollutants. Volume I. Introduction to the SPAHR demographic model for health risk

Energy Technology Data Exchange (ETDEWEB)

Collins, J.J.; Lundy, R.T.; Grahn, D.; Ginevan, M.E.

1982-09-01

The Simulation Package for the Analysis of Health Risk (SPAHR) is a computer software package based upon a demographic model for health risk projections. The model extends several health risk projection models by making realistic assumptions about the population at risk, and thus represents a distinct improvement over previous models. Complete documentation for use of SPAHR is contained in this five-volume publication. The demographic model in SPAHR estimates population response to environmental toxic exposures. Latency of response, changing dose level over time, competing risks from other causes of death, and population structure can be incorporated into SPAHR to project health risks. Risks are measured by morbid years, number of deaths, and loss of life expectancy. Comparisons of estimates of excess deaths demonstrate that previous health risk projection models may have underestimated excess deaths by a factor of from 2 to 10, depending on the pollutant and the exposure scenario. The software supporting the use of the demographic model is designed to be user oriented. Complex risk projections are made by responding to a series of prompts generated by the package. The flexibility and ease of use of SPAHR make it an important contribution to existing models and software packages. The first volume presents the theory behind the SPAHR health risk projection model and several applications of the model to actual pollution episodes. The elements required for an effective health risk projection model are specified, and the models that have been used to date in health risk projections are outlined. These are compared with the demographic model, whose formulation is described in detail. Examples of the application of air pollution and radiation dose-response functions are included in order to demonstrate the estimation of future mortality and morbidity levels and the range of variation in excess deaths that occurs when populations structure is changed.

Projection models for health-effects assessment in populations exposed to radioactive and nonradioactive pollutants. Volume I. Introduction to the SPAHR demographic model for health risk

International Nuclear Information System (INIS)

Collins, J.J.; Lundy, R.T.; Grahn, D.; Ginevan, M.E.

1982-09-01

The Simulation Package for the Analysis of Health Risk (SPAHR) is a computer software package based upon a demographic model for health risk projections. The model extends several health risk projection models by making realistic assumptions about the population at risk, and thus represents a distinct improvement over previous models. Complete documentation for use of SPAHR is contained in this five-volume publication. The demographic model in SPAHR estimates population response to environmental toxic exposures. Latency of response, changing dose level over time, competing risks from other causes of death, and population structure can be incorporated into SPAHR to project health risks. Risks are measured by morbid years, number of deaths, and loss of life expectancy. Comparisons of estimates of excess deaths demonstrate that previous health risk projection models may have underestimated excess deaths by a factor of from 2 to 10, depending on the pollutant and the exposure scenario. The software supporting the use of the demographic model is designed to be user oriented. Complex risk projections are made by responding to a series of prompts generated by the package. The flexibility and ease of use of SPAHR make it an important contribution to existing models and software packages. The first volume presents the theory behind the SPAHR health risk projection model and several applications of the model to actual pollution episodes. The elements required for an effective health risk projection model are specified, and the models that have been used to date in health risk projections are outlined. These are compared with the demographic model, whose formulation is described in detail. Examples of the application of air pollution and radiation dose-response functions are included in order to demonstrate the estimation of future mortality and morbidity levels and the range of variation in excess deaths that occurs when populations structure is changed

mHealth Series: mHealth project in Zhao County, rural China – Description of objectives, field site and methods

Science.gov (United States)

van Velthoven, Michelle Helena; Li, Ye; Wang, Wei; Du, Xiaozhen; Wu, Qiong; Chen, Li; Majeed, Azeem; Rudan, Igor; Zhang, Yanfeng; Car, Josip

2013-01-01

Background We set up a collaboration between researchers in China and the UK that aimed to explore the use of mHealth in China. This is the first paper in a series of papers on a large mHealth project part of this collaboration. This paper included the aims and objectives of the mHealth project, our field site, and the detailed methods of two studies. Field site The field site for this mHealth project was Zhao County, which lies 280 km south of Beijing in Hebei Province, China. Methods We described the methodology of two studies: (i) a mixed methods study exploring factors influencing sample size calculations for mHealth–based health surveys and (ii) a cross–over study determining validity of an mHealth text messaging data collection tool. The first study used mixed methods, both quantitative and qualitative, including: (i) two surveys with caregivers of young children, (ii) interviews with caregivers, village doctors and participants of the cross–over study, and (iii) researchers’ views. We combined data from caregivers, village doctors and researchers to provide an in–depth understanding of factors influencing sample size calculations for mHealth–based health surveys. The second study, a cross–over study, used a randomised cross–over study design to compare the traditional face–to–face survey method to the new text messaging survey method. We assessed data equivalence (intrarater agreement), the amount of information in responses, reasons for giving different responses, the response rate, characteristics of non–responders, and the error rate. Conclusions This paper described the objectives, field site and methods of a large mHealth project part of a collaboration between researchers in China and the UK. The mixed methods study evaluating factors that influence sample size calculations could help future studies with estimating reliable sample sizes. The cross–over study comparing face–to–face and text message survey data collection

Southeast Region Headboat Survey-PPS Survey Design Project

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This dataset is a record of trips selected during pilot procedures for the PPS design project designed to track the port agents ability to follow the PPS design and...

Weight Care Project: Health professionals' attitudes and ability to assess body weight status - Study protocol

LENUS (Irish Health Repository)

Moorhead, Anne

2011-03-31

Abstract Background Health professionals working in primary care and public health have opportunities to address body weight status issues with their patients through face-to-face contact. The objectives of this all-Ireland project are: 1. to assess the attitudes, current practices\\/behaviours and knowledge of key health professional groups on body weight status; 2. to assess the health professional groups\\' ability to identify body weight status in both adults and children. The health professional groups are: (a) community related public health nurses; (b) school public health nurses; (c) GPs and practice nurses (primary care); and (d) occupational health nurses (workplace) from both Northern Ireland and the Republic of Ireland. Methods\\/Design This all-Ireland multi-disciplinary project follows a mixed methods approach using both quantitative and qualitative methodologies, and consists of four components: 1. Literature review - to explore the role of health professionals in managing obesity through spontaneous intervention in a variety of health promotion settings. 2. Telephone interviews and focus groups - to gain an in-depth insight into the views of health professionals in assessing body weight status. 3. Survey (primarily online but also paper-based) - to determine the attitudes, current practices\\/behaviours and knowledge of health professionals in assessing body weight status. 4. Online evaluation study - an online interactive programme will be developed to assess health professionals\\' ability to identify the body weight status of adults and children. Discussion This project will assess and report the attitudes, current practices\\/behaviours and knowledge of key health professional groups within Northern Ireland and the Republic of Ireland on body weight status, and their ability to identify body weight status in both adults and children. The results of this project will generate recommendations for clinical practice in managing obesity, which may

Weight Care Project: Health professionals' attitudes and ability to assess body weight status - Study protocol

Directory of Open Access Journals (Sweden)

Murphy Kathy

2011-03-01

Full Text Available Abstract Background Health professionals working in primary care and public health have opportunities to address body weight status issues with their patients through face-to-face contact. The objectives of this all-Ireland project are: 1. to assess the attitudes, current practices/behaviours and knowledge of key health professional groups on body weight status; 2. to assess the health professional groups' ability to identify body weight status in both adults and children. The health professional groups are: (a community related public health nurses; (b school public health nurses; (c GPs and practice nurses (primary care; and (d occupational health nurses (workplace from both Northern Ireland and the Republic of Ireland. Methods/Design This all-Ireland multi-disciplinary project follows a mixed methods approach using both quantitative and qualitative methodologies, and consists of four components: 1. Literature review - to explore the role of health professionals in managing obesity through spontaneous intervention in a variety of health promotion settings. 2. Telephone interviews and focus groups - to gain an in-depth insight into the views of health professionals in assessing body weight status. 3. Survey (primarily online but also paper-based - to determine the attitudes, current practices/behaviours and knowledge of health professionals in assessing body weight status. 4. Online evaluation study - an online interactive programme will be developed to assess health professionals' ability to identify the body weight status of adults and children. Discussion This project will assess and report the attitudes, current practices/behaviours and knowledge of key health professional groups within Northern Ireland and the Republic of Ireland on body weight status, and their ability to identify body weight status in both adults and children. The results of this project will generate recommendations for clinical practice in managing obesity, which may

Hong Kong's health spending projections through 2033.

Science.gov (United States)

Leung, Gabriel M; Tin, Keith Y K; Chan, Wai-Sum

2007-04-01

To derive actuarial projection estimates of Hong Kong's total domestic health expenditure to the year 2033. Disaggregating health expenditure by age, sex, unit cost and utilisation level, we estimated future health spending by projecting utilisation (by public/private, inpatient/outpatient care) to reflect demographic changes and associated increase in demand (from higher expectations and greater intensity of care), and then multiplying such by the projected unit costs (incorporating the impact of key cost drivers such as public expectations, technological changes and potential productivity gains) to obtain total expenditure estimates. The model was most sensitive to the excess health care price inflation rate, i.e. the annual price/cost growth of medical goods and services over and above per capita GDP growth. Population ageing and growth per se, without taking into account related technologic innovation for chronic conditions that particularly afflict older adults, contribute relatively little to overall spending growth. Given the model assumptions, it is possible to limit total health spending to below 10% of GDP by 2033, where the public share would gradually decline from the current 57% to between 46% and 49%. Expenditure control through global budgeting, technology assessment and demand-side constraints should be considered although their effectiveness remains inconclusive.

Telemedicine and primary health: The virtual doctor project Zambia

OpenAIRE

Mupela, Evans; Mustarde, Paul; Jones, Huw

2011-01-01

This paper is a commentary on a project application of telemedicine to alleviate primary health care problems in Lundazi district in the Eastern province of Zambia. The project dubbed 'The Virtual Doctor Project' will use hard body vehicles fitted with satellite communication devices and modern medical equipment to deliver primary health care services to some of the neediest areas of the country. The relevance and importance of the project lies in the fact that these areas are hard-to-reach d...

Systems approach for design control at Monitored Retrievable Storage Project

International Nuclear Information System (INIS)

Kumar, P.N.; Williams, J.R.

1994-01-01

This paper describes the systems approach in establishing design control for the Monitored Retrievable Storage Project design development. Key elements in design control are enumerated and systems engineering aspects are detailed. Application of lessons learned from the Yucca Mountain Project experience is addressed. An integrated approach combining quality assurance and systems engineering requirements is suggested to practice effective design control

Air Pollution and Climate Change Health Impact Assessment. The ACHIA Project

International Nuclear Information System (INIS)

Kinney, P.L.

2013-01-01

Climate change may affect human health via interactions with air pollutants such as ozone and PM 2.5 . These air pollutants are linked to climate because they can be both affected by and have effects on climate. In coming decades, substantial, cost-effective improvements in public health may be achieved with well-planned strategies to mitigate climate impacts while also reducing health effects of ozone and PM 2.5 . Climate mitigation actions affect greenhouse pollutant emissions, including methane and black carbon, but also may affect other key air pollution precursors such as NOx, CO, and SOx. To better understand the potential of such strategies, studies are needed that assess possible future health impacts under alternative assumptions about future emissions and climate across multiple spatial scales. The overall objective of this project is to apply state of the art climate, air quality, and health modelling tools to assess future health impacts of ozone and PM 2.5 under different IPCCs scenario of climate change, focusing specifically on pollution-related health co-benefits which could be achieved under alternative climate mitigation pathways in the period 2030-2050. This question will be explored at three spatial scales: global, regional (Europe), and urban (Paris). ACHIA is comprised of an integrated set of four work packages: WP1. Global Climate and Air Pollution Impacts of Alternative Emissions Pathways; WP2. Climate and Air Quality at Regional and Urban Scales: Results for Europe and Paris; WP3. Health Impact Assessment; WP4. Dissemination, Evaluation, Management. ACHIA is designed to create an interdisciplinary approach to the impacts of climate change on health through air quality changes, and to start longer-term collaborations between communities. We expect the project to advance state of art across all WPs, with important implications for research groups around the world. A particular innovation of the project is the multi-scale aspect, i.e., the

Researchers' experience with project management in health and medical research: Results from a post-project review

Science.gov (United States)

2011-01-01

Background Project management is widely used to deliver projects on time, within budget and of defined quality. However, there is little published information describing its use in managing health and medical research projects. We used project management in the Alcohol and Pregnancy Project (2006-2008) http://www.ichr.uwa.edu.au/alcoholandpregnancy and in this paper report researchers' opinions on project management and whether it made a difference to the project. Methods A national interdisciplinary group of 20 researchers, one of whom was the project manager, formed the Steering Committee for the project. We used project management to ensure project outputs and outcomes were achieved and all aspects of the project were planned, implemented, monitored and controlled. Sixteen of the researchers were asked to complete a self administered questionnaire for a post-project review. Results The project was delivered according to the project protocol within the allocated budget and time frame. Fifteen researchers (93.8%) completed a questionnaire. They reported that project management increased the effectiveness of the project, communication, teamwork, and application of the interdisciplinary group of researchers' expertise. They would recommend this type of project management for future projects. Conclusions Our post-project review showed that researchers comprehensively endorsed project management in the Alcohol and Pregnancy Project and agreed that project management had contributed substantially to the research. In future, we will project manage new projects and conduct post-project reviews. The results will be used to encourage continuous learning and continuous improvement of project management, and provide greater transparency and accountability of health and medical research. The use of project management can benefit both management and scientific outcomes of health and medical research projects. PMID:21635721

Design of the DISCovery project: tailored work-oriented interventions to improve employee health, well-being, and performance-related outcomes in hospital care.

Science.gov (United States)

Niks, Irene M W; de Jonge, Jan; Gevers, Josette M P; Houtman, Irene L D

2013-02-19

It is well-known that health care workers in today's general hospitals have to deal with high levels of job demands, which could have negative effects on their health, well-being, and job performance. A way to reduce job-related stress reactions and to optimize positive work-related outcomes is to raise the level of specific job resources and opportunities to recover from work. However, the question remains how to translate the optimization of the balance between job demands, job resources, and recovery opportunities into effective workplace interventions. The aim of the DISCovery project is to develop and implement tailored work-oriented interventions to improve health, well-being, and performance of health care personnel. A quasi-experimental field study with a non-equivalent control group pretest-posttest design will be conducted in a top general hospital. Four existing organizational departments will provide both an intervention and a comparison group. Two types of research methods are used: (1) a longitudinal web-based survey study, and (2) a longitudinal daily diary study. After base-line measures of both methods, existing and yet to be developed interventions will be implemented within the experimental groups. Follow-up measurements will be taken one and two years after the base-line measures to analyze short-term and long-term effects of the interventions. Additionally, a process evaluation and a cost-effectiveness analysis will be carried out. The DISCovery project fulfills a strong need for theory-driven and scientifically well-performed research on job stress and performance interventions. It will provide insight into (1) how a balance between job demands, job resources, and recovery from work can be optimized, (2) the short-term and long-term effects of tailored work-oriented effects, and (3) indicators for successful or unsuccessful implementation of interventions.

Crew Health Care System (CHeCS) Design Research, Documentations, and Evaluations

Science.gov (United States)

CLement, Bethany M.

2011-01-01

The Crew Health Care System (CHeCS) is a group within the Space Life Science Directorate (SLSD) that focuses on the overall health of astronauts by reinforcing the three divisions - the Environmental Maintenance System (EMS), the Countermeasures System (CMS), and the Health Maintenance System (HMS). This internship provided opportunity to gain knowledge, experience, and skills in CHeCS engineering and operations tasks. Various and differing tasks allowed for occasions to work independently, network to get things done, and show leadership abilities. Specific exercises included reviewing hardware certification, operations, and documentation within the ongoing Med Kit Redesign (MKR) project, and learning, writing, and working various common pieces of paperwork used in the engineering and design process. Another project focused on the distribution of various pieces of hardware to off-site research facilities with an interest in space flight health care. The main focus of this internship, though, was on a broad and encompassing understanding of the engineering process as time was spent looking at each individual step in a variety of settings and tasks.

Knowledge management in design teams using a project website

OpenAIRE

Otter, den, A.F.H.J.; Lima, C.P

2007-01-01

In this paper the sharing of knowledge in architectural design teams using a Project Website is discussed. The results of multiple case studies, being part of a recently finished PhD research project to communication and performance of design teams using a Project Website, show that systems for sharing of knowledge in such teams are hard to change and better systems are difficult to implement for various reasons. Sharing of knowledge in such teams is important for collective understanding of ...

[A project to reduce the incidence of intubation care errors among foreign health aides].

Science.gov (United States)

Chen, Mei-Ju; Lu, Yu-Hua; Chen, Chiu-Chun; Li, Ai-Cheng

2014-08-01

Foreign health aides are the main providers of care for the elderly and the physically disabled in Taiwan. Correct care skills improve patient safety. In 2010, the incidence of mistakes among foreign health aides in our hospital unit was 58% for nasogastric tube care and 57% for tracheostomy tube care. A survey of foreign health aides and nurses in the unit identified the main causes of these mistakes as: communication difficulties, inaccurate instructions given to patients, and a lack of standard operating procedures given to the foreign health aides. This project was designed to reduce the rates of improper nasogastric tube care and improper tracheostomy tube care to 20%, respectively. This project implemented several appropriate measures. We produced patient instruction hand-outs in Bahasa Indonesia, established a dedicated file holder for Bahasa Indonesian tube care reference information, produced Bahasa Indonesian tube-care-related posters, produced a short film about tube care in Bahasa Indonesian, and established a standardized operating procedure for tube care in our unit. Between December 15th and 31st, 2011, we audited the performance of a total of 32 foreign health aides for proper execution of nasogastric tube care (21 aides) and of proper execution of tracheostomy tube care (11 aides). Patients with concurrent nasogastric and tracheostomy tubes were inspected separately for each care group. The incidence of improper care decreased from 58% to 18% nasogastric intubation and 57% to 18% for tracheostomy intubation. This project decreased significantly the incidence of improper tube care by the foreign health aides in our unit. Furthermore, the foreign health aides improved their tube nursing care skills. Therefore, this project improved the quality of patient care.

Project designing of Temelin nuclear power plant

International Nuclear Information System (INIS)

Krychtalek, Z.; Linek, V.

1989-01-01

The geological and seismic parameters are listed of the Temelin nuclear power plant. The division of the site in building zones is described. The main zones consist of the power generation unit zone with the related auxiliary buildings of hot plants and of the auxiliary buildings of the nonactive part with industrial buildings. The important buildings are interconnected with communication and technology bridges. Cooling towers and spray pools and the entrance area are part of the urbanistic design. The architectonic design of the buildings uses standard building elements and materials. The design of the buildings is based on the requirements on their function and on structural load and on the demands of maximal utilization of the type of the reinforced concrete prefab structure system. The structure is made of concrete or steel cells. The project design is based on Soviet projects. The layout is shown of the main power generation units and a section is presented of a 1,000 MW unit. (J.B.). 2 figs

Health Activities Project (HAP), Trial Edition III.

Science.gov (United States)

Buller, Dave; And Others

Contained within this Health Activities Project (HAP) trial edition (set III) are a teacher information folio and numerous student activity folios which center around the idea that students in grades 5-8 can control their own health and safety. Each student folio is organized into an Overview, Health Background, Materials, Setting Up, and…

Project Management Approaches for Online Learning Design

Science.gov (United States)

Eby, Gulsun; Yuzer, T. Volkan

2013-01-01

Developments in online learning and its design are areas that continue to grow in order to enhance students' learning environments and experiences. However, in the implementation of new technologies, the importance of properly and fairly overseeing these courses is often undervalued. "Project Management Approaches for Online Learning Design"…

Preliminary report from the World Health Organisation Chest Radiography in Epidemiological Studies project

Energy Technology Data Exchange (ETDEWEB)

Mahomed, Nasreen [University of the Witwatersrand, Department of Radiology, Johannesburg (South Africa); University of the Witwatersrand, Medical Research Council: Respiratory and Meningeal Pathogens Research Unit, Johannesburg (South Africa); Fancourt, Nicholas [Johns Hopkins Bloomberg School of Public Health, Baltimore (United States); Murdoch Children' s Research Institute, Melbourne (Australia); De Campo, John; De Campo, Margaret [Murdoch Children' s Research Institute, Melbourne (Australia); Melbourne University, Melbourne (Australia); Akano, Aliu [Department of Radiology National Hospital, Abuja (Nigeria); Medical Research Council, Gambia (South Africa); Cherian, Thomas [World Health Organization, Geneva (Switzerland); Cohen, Olivia G. [Johns Hopkins Bloomberg School of Public Health, Baltimore (United States); World Health Organization, Geneva (Switzerland); Greenberg, David [Soroka University Medical Center, Beer-Sheva (Israel); Lacey, Stephen [Murdoch Children' s Research Institute, Melbourne (Australia); Kohli, Neera [King George Medical University, Lucknow (India); Lederman, Henrique M. [Paulista School of Medicine, Hospital Sao Paulo, Sao Paulo (Brazil); Madhi, Shabir A. [University of the Witwatersrand, Medical Research Council: Respiratory and Meningeal Pathogens Research Unit, Johannesburg (South Africa); University of the Witwatersrand, Department of Science and Technology/National Research Foundation: Vaccine Preventable Diseases, Johannesburg (South Africa); Manduku, Veronica [Kenya Medical Research Institute (KEMRI), Nairobi (Kenya); McCollum, Eric D. [Johns Hopkins School of Medicine, Eudowood Division of Pediatric Respiratory Sciences, Baltimore (United States); Johns Hopkins Bloomberg School of Public Health, Baltimore (United States); Park, Kate [Oxford University Hospitals NHS Foundation Trust, Oxford (United Kingdom); Ribo-Aristizabal, Jose Luis [Hospital Sant Joan de Deu, Barcelona (Spain); Bar-Zeev, Naor [University of Malawi, Malawi-Liverpool-Wellcome Trust Clinical Research Programme, College of Medicine, Blantyre (Malawi); University of Liverpool, Centre for Global Vaccine Research, Liverpool (United Kingdom); O' Brien, Katherine L. [Johns Hopkins Bloomberg School of Public Health, Baltimore (United States); Mulholland, Kim [Murdoch Children' s Research Institute, Melbourne (Australia); London School of Hygiene and Tropical Medicine, London (United Kingdom)

2017-10-15

Childhood pneumonia is among the leading infectious causes of mortality in children younger than 5 years of age globally. Streptococcus pneumoniae (pneumococcus) is the leading infectious cause of childhood bacterial pneumonia. The diagnosis of childhood pneumonia remains a critical epidemiological task for monitoring vaccine and treatment program effectiveness. The chest radiograph remains the most readily available and common imaging modality to assess childhood pneumonia. In 1997, the World Health Organization Radiology Working Group was established to provide a consensus method for the standardized definition for the interpretation of pediatric frontal chest radiographs, for use in bacterial vaccine efficacy trials in children. The definition was not designed for use in individual patient clinical management because of its emphasis on specificity at the expense of sensitivity. These definitions and endpoint conclusions were published in 2001 and an analysis of observer variation for these conclusions using a reference library of chest radiographs was published in 2005. In response to the technical needs identified through subsequent meetings, the World Health Organization Chest Radiography in Epidemiological Studies (CRES) project was initiated and is designed to be a continuation of the World Health Organization Radiology Working Group. The aims of the World Health Organization CRES project are to clarify the definitions used in the World Health Organization defined standardized interpretation of pediatric chest radiographs in bacterial vaccine impact and pneumonia epidemiological studies, reinforce the focus on reproducible chest radiograph readings, provide training and support with World Health Organization defined standardized interpretation of chest radiographs and develop guidelines and tools for investigators and site staff to assist in obtaining high-quality chest radiographs. (orig.)

Preliminary report from the World Health Organisation Chest Radiography in Epidemiological Studies project.

Science.gov (United States)

Mahomed, Nasreen; Fancourt, Nicholas; de Campo, John; de Campo, Margaret; Akano, Aliu; Cherian, Thomas; Cohen, Olivia G; Greenberg, David; Lacey, Stephen; Kohli, Neera; Lederman, Henrique M; Madhi, Shabir A; Manduku, Veronica; McCollum, Eric D; Park, Kate; Ribo-Aristizabal, Jose Luis; Bar-Zeev, Naor; O'Brien, Katherine L; Mulholland, Kim

2017-10-01

Childhood pneumonia is among the leading infectious causes of mortality in children younger than 5 years of age globally. Streptococcus pneumoniae (pneumococcus) is the leading infectious cause of childhood bacterial pneumonia. The diagnosis of childhood pneumonia remains a critical epidemiological task for monitoring vaccine and treatment program effectiveness. The chest radiograph remains the most readily available and common imaging modality to assess childhood pneumonia. In 1997, the World Health Organization Radiology Working Group was established to provide a consensus method for the standardized definition for the interpretation of pediatric frontal chest radiographs, for use in bacterial vaccine efficacy trials in children. The definition was not designed for use in individual patient clinical management because of its emphasis on specificity at the expense of sensitivity. These definitions and endpoint conclusions were published in 2001 and an analysis of observer variation for these conclusions using a reference library of chest radiographs was published in 2005. In response to the technical needs identified through subsequent meetings, the World Health Organization Chest Radiography in Epidemiological Studies (CRES) project was initiated and is designed to be a continuation of the World Health Organization Radiology Working Group. The aims of the World Health Organization CRES project are to clarify the definitions used in the World Health Organization defined standardized interpretation of pediatric chest radiographs in bacterial vaccine impact and pneumonia epidemiological studies, reinforce the focus on reproducible chest radiograph readings, provide training and support with World Health Organization defined standardized interpretation of chest radiographs and develop guidelines and tools for investigators and site staff to assist in obtaining high-quality chest radiographs.

Preliminary report from the World Health Organisation Chest Radiography in Epidemiological Studies project

International Nuclear Information System (INIS)

Mahomed, Nasreen; Fancourt, Nicholas; De Campo, John; De Campo, Margaret; Akano, Aliu; Cherian, Thomas; Cohen, Olivia G.; Greenberg, David; Lacey, Stephen; Kohli, Neera; Lederman, Henrique M.; Madhi, Shabir A.; Manduku, Veronica; McCollum, Eric D.; Park, Kate; Ribo-Aristizabal, Jose Luis; Bar-Zeev, Naor; O'Brien, Katherine L.; Mulholland, Kim

2017-01-01

Childhood pneumonia is among the leading infectious causes of mortality in children younger than 5 years of age globally. Streptococcus pneumoniae (pneumococcus) is the leading infectious cause of childhood bacterial pneumonia. The diagnosis of childhood pneumonia remains a critical epidemiological task for monitoring vaccine and treatment program effectiveness. The chest radiograph remains the most readily available and common imaging modality to assess childhood pneumonia. In 1997, the World Health Organization Radiology Working Group was established to provide a consensus method for the standardized definition for the interpretation of pediatric frontal chest radiographs, for use in bacterial vaccine efficacy trials in children. The definition was not designed for use in individual patient clinical management because of its emphasis on specificity at the expense of sensitivity. These definitions and endpoint conclusions were published in 2001 and an analysis of observer variation for these conclusions using a reference library of chest radiographs was published in 2005. In response to the technical needs identified through subsequent meetings, the World Health Organization Chest Radiography in Epidemiological Studies (CRES) project was initiated and is designed to be a continuation of the World Health Organization Radiology Working Group. The aims of the World Health Organization CRES project are to clarify the definitions used in the World Health Organization defined standardized interpretation of pediatric chest radiographs in bacterial vaccine impact and pneumonia epidemiological studies, reinforce the focus on reproducible chest radiograph readings, provide training and support with World Health Organization defined standardized interpretation of chest radiographs and develop guidelines and tools for investigators and site staff to assist in obtaining high-quality chest radiographs. (orig.)

Health Activities Project (HAP), Trial Edition II.

Science.gov (United States)

Buller, Dave; And Others

Contained within this Health Activities Project (HAP) trial edition (set II) are a teacher information folio and numerous student activity folios which center around the idea that students in grades 5-8 can control their own health and safety. Each student folio is organized into a Synopsis, Health Background, Materials, Setting Up, and Activities…

Atmospheric River Tracking Method Intercomparison Project (ARTMIP: project goals and experimental design

Directory of Open Access Journals (Sweden)

C. A. Shields

2018-06-01

Full Text Available The Atmospheric River Tracking Method Intercomparison Project (ARTMIP is an international collaborative effort to understand and quantify the uncertainties in atmospheric river (AR science based on detection algorithm alone. Currently, there are many AR identification and tracking algorithms in the literature with a wide range of techniques and conclusions. ARTMIP strives to provide the community with information on different methodologies and provide guidance on the most appropriate algorithm for a given science question or region of interest. All ARTMIP participants will implement their detection algorithms on a specified common dataset for a defined period of time. The project is divided into two phases: Tier 1 will utilize the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2 reanalysis from January 1980 to June 2017 and will be used as a baseline for all subsequent comparisons. Participation in Tier 1 is required. Tier 2 will be optional and include sensitivity studies designed around specific science questions, such as reanalysis uncertainty and climate change. High-resolution reanalysis and/or model output will be used wherever possible. Proposed metrics include AR frequency, duration, intensity, and precipitation attributable to ARs. Here, we present the ARTMIP experimental design, timeline, project requirements, and a brief description of the variety of methodologies in the current literature. We also present results from our 1-month proof-of-concept trial run designed to illustrate the utility and feasibility of the ARTMIP project.

Evaluation of Embedded System Component Utilized in Delivery Integrated Design Project Course

Science.gov (United States)

Junid, Syed Abdul Mutalib Al; Hussaini, Yusnira; Nazmie Osman, Fairul; Razak, Abdul Hadi Abdul; Idros, Mohd Faizul Md; Karimi Halim, Abdul

2018-03-01

This paper reports the evaluation of the embedded system component utilized in delivering the integrated electronic engineering design project course. The evaluation is conducted based on the report project submitted as to fulfil the assessment criteria for the integrated electronic engineering design project course named; engineering system design. Six projects were assessed in this evaluation. The evaluation covers the type of controller, programming language and the number of embedded component utilization as well. From the evaluation, the C-programming based language is the best solution preferred by the students which provide them flexibility in the programming. Moreover, the Analog to Digital converter is intensively used in the projects which include sensors in their proposed design. As a conclusion, in delivering the integrated design project course, the knowledge over the embedded system solution is very important since the high density of the knowledge acquired in accomplishing the project assigned.

Designing eHealth that Matters via a Multidisciplinary Requirements Development Approach.

Science.gov (United States)

Van Velsen, Lex; Wentzel, Jobke; Van Gemert-Pijnen, Julia Ewc

2013-06-24

Requirements development is a crucial part of eHealth design. It entails all the activities devoted to requirements identification, the communication of requirements to other developers, and their evaluation. Currently, a requirements development approach geared towards the specifics of the eHealth domain is lacking. This is likely to result in a mismatch between the developed technology and end user characteristics, physical surroundings, and the organizational context of use. It also makes it hard to judge the quality of eHealth design, since it makes it difficult to gear evaluations of eHealth to the main goals it is supposed to serve. In order to facilitate the creation of eHealth that matters, we present a practical, multidisciplinary requirements development approach which is embedded in a holistic design approach for eHealth (the Center for eHealth Research roadmap) that incorporates both human-centered design and business modeling. Our requirements development approach consists of five phases. In the first, preparatory, phase the project team is composed and the overall goal(s) of the eHealth intervention are decided upon. Second, primary end users and other stakeholders are identified by means of audience segmentation techniques and our stakeholder identification method. Third, the designated context of use is mapped and end users are profiled by means of requirements elicitation methods (eg, interviews, focus groups, or observations). Fourth, stakeholder values and eHealth intervention requirements are distilled from data transcripts, which leads to phase five, in which requirements are communicated to other developers using a requirements notation template we developed specifically for the context of eHealth technologies. The end result of our requirements development approach for eHealth interventions is a design document which includes functional and non-functional requirements, a list of stakeholder values, and end user profiles in the form of

The health protection of riparian populations in case of a major oil spill:. The St. Lawrence Vision 2000 Shores project

International Nuclear Information System (INIS)

Guerrier, P.; Tardif, G.

1995-01-01

Objectives of a research project to protect the health of riparian populations in the event of a major oil spill in the St. Lawrence river were summarized. The project is a part of the health component of the St. Lawrence Vision 2000 (SLV-2000) action plan, which is a product of co-operation among Environment Canada, Health Canada, le ministere de la Sante et des Services sociaux du Quebec, and other government departments, designed to protect and conserve the St. Lawrence river and its environment

A synthesis of evaluation monitoring projects by the forest health monitoring program (1998-2007)

Science.gov (United States)

William A. Bechtold; Michael J. Bohne; Barbara L. Conkling; Dana L. Friedman

2012-01-01

The national Forest Health Monitoring Program of the Forest Service, U.S. Department of Agriculture, has funded over 200 Evaluation Monitoring projects. Evaluation Monitoring is designed to verify and define the extent of deterioration in forest ecosystems where potential problems have been identified. This report is a synthesis of results from over 150 Evaluation...

Delft Aerospace Design Projects 2016 : Inspring Designs in Aeronautics, Astronautics and Wind Energy

NARCIS (Netherlands)

Melkert, J.A.

2016-01-01

This book presents an overview of the results of the Fall Design Synthesis Exercise 2015 and the Spring Design Synthesis Exercise of 2016, based on summaries of each of the projects. The Design Synthesis Exercise Coordination Committee, responsible for the organisation and execution of the exercise,

Delft Aerospace Design Projects 2014 : New Designs in Aeronautics, Astronautics and Wind Energy

NARCIS (Netherlands)

Melkert, J.A.

2014-01-01

This book presents an overview of the results of the Fall Design Synthesis Exercise 2013 and the Spring Design Synthesis Exercise of 2014, based on summaries of each of the projects. The Design Synthesis Exercise Coordination Committee, responsible for the organisation and execution of the exercise,

The Personal Health Technology Design Space

DEFF Research Database (Denmark)

Bardram, Jakob Eyvind; Frost, Mads

2016-01-01

. To enable designers to make informed and well-articulated design decision, the authors propose a design space for personal health technologies. This space consists of 10 dimensions related to the design of data sampling strategies, visualization and feedback approaches, treatment models, and regulatory......Interest is increasing in personal health technologies that utilize mobile platforms for improved health and well-being. However, although a wide variety of these systems exist, each is designed quite differently and materializes many different and more or less explicit design assumptions...

Improving Initiation and Tracking of Research Projects at an Academic Health Center: A Case Study.

Science.gov (United States)

Schmidt, Susanne; Goros, Martin; Parsons, Helen M; Saygin, Can; Wan, Hung-Da; Shireman, Paula K; Gelfond, Jonathan A L

2017-09-01

Research service cores at academic health centers are important in driving translational advancements. Specifically, biostatistics and research design units provide services and training in data analytics, biostatistics, and study design. However, the increasing demand and complexity of assigning appropriate personnel to time-sensitive projects strains existing resources, potentially decreasing productivity and increasing costs. Improving processes for project initiation, assigning appropriate personnel, and tracking time-sensitive projects can eliminate bottlenecks and utilize resources more efficiently. In this case study, we describe our application of lean six sigma principles to our biostatistics unit to establish a systematic continual process improvement cycle for intake, allocation, and tracking of research design and data analysis projects. The define, measure, analyze, improve, and control methodology was used to guide the process improvement. Our goal was to assess and improve the efficiency and effectiveness of operations by objectively measuring outcomes, automating processes, and reducing bottlenecks. As a result, we developed a web-based dashboard application to capture, track, categorize, streamline, and automate project flow. Our workflow system resulted in improved transparency, efficiency, and workload allocation. Using the dashboard application, we reduced the average study intake time from 18 to 6 days, a 66.7% reduction over 12 months (January to December 2015).

Design Fixation and Cooperative Learning in Elementary Engineering Design Project: A Case Study

Directory of Open Access Journals (Sweden)

Yi Luo

2015-09-01

Full Text Available This paper presents a case study examining 3rd, 4th and 5th graders’ design fixation and cooperative learning in an engineering design project. A mixed methods instrument, the Cooperative Learning Observation Protocol (CLOP, was adapted to record frequency and class observation on cooperative learning engagement through detailed field notes. Students’ design journals and reflections were also analyzed for an inductive qualitative analysis. The findings indicate three major themes of design fixation: 1 fixation on common features of things; 2 fixation on popular teenage culture; 3 fixation on the first design idea. In the cooperative learning process of elementary engineering design project, although pupils had demonstrated some abilities to solve concrete problems in a logical fashion, the participants encountered a number of obstacles in the group. Dominance, social loafing, and other problems occurring in the group process might have offset certain benefits of cooperative learning. Implications of the findings are also discussed.

Design fixation and cooperative learning in elementary engineering design project: A case study

Directory of Open Access Journals (Sweden)

Yi Luo

2015-09-01

Full Text Available This paper presents a case study examining 3rd, 4th and 5th graders’ design fixation and cooperative learning in an engineering design project. A mixed methods instrument, the Cooperative Learning Observation Protocol (CLOP, was adapted to record frequency and class observation on cooperative learning engagement through detailed field notes. Students’ design journals and reflections were also analyzed for an inductive qualitative analysis. The findings indicate three major themes of design fixation: 1 fixation on common features of things; 2 fixation on popular teenage culture; 3 fixation on the first design idea. In the cooperative learning process of elementary engineering design project, although pupils had demonstrated some abilities to solve concrete problems in a logical fashion, the participants encountered a number of obstacles in the group. Dominance, social loafing, and other problems occurring in the group process might have offset certain benefits of cooperative learning. Implications of the findings are also discussed.

Implementation of municipal health promoting projects in primary schools: teachers perspective

DEFF Research Database (Denmark)

Nordin, Lone Lindegard

2013-01-01

. The project is funded by the Danish Ministry of Science, University of Aarhus and Silkeborg municipality, and involves 5 primary schools, 23 teachers and 233 pupils from 7th to 9 class. The project is positioned within the critical approach to school health education and health promotion, developed......Implementation of municipally health promoting projects' in primary schools: teachers perspective Research question This paper discusses the findings from a qualitative research, that aimed to investigate how teachers in primary schools implemented municipal health promoting projects focusing...... that there is a “gap” between policy and practice according to aim, content and methods, and that teachers practice can be explained as coping mechanism. The key findings include: • Teachers practice is closer to traditional health education than critical health education. • Teachers priorities the mandatory teaching...

Recognizing Risk-of-Failure in Communication Design Projects

Science.gov (United States)

Yee, Joyce; Lievesley, Matthew; Taylor, Louise

2009-01-01

The pace of commercial graphic design practice presents very few opportunities to conduct user research after a project's launch. This makes the design team's ability to anticipate and address risks during the design development phase even more important, recognized in the astute observation from Tim Brown, CEO of leading international design…

Capstone Engineering Design Projects for Community Colleges

Science.gov (United States)

Walz, Kenneth A.; Christian, Jon R.

2017-01-01

Capstone engineering design courses have been a feature at research universities and four-year schools for many years. Although such classes are less common at two-year colleges, the experience is equally beneficial for this population of students. With this in mind, Madison College introduced a project-based Engineering Design course in 2007.…

Distributed and grid computing projects with research focus in human health.

Science.gov (United States)

Diomidous, Marianna; Zikos, Dimitrios

2012-01-01

Distributed systems and grid computing systems are used to connect several computers to obtain a higher level of performance, in order to solve a problem. During the last decade, projects use the World Wide Web to aggregate individuals' CPU power for research purposes. This paper presents the existing active large scale distributed and grid computing projects with research focus in human health. There have been found and presented 11 active projects with more than 2000 Processing Units (PUs) each. The research focus for most of them is molecular biology and, specifically on understanding or predicting protein structure through simulation, comparing proteins, genomic analysis for disease provoking genes and drug design. Though not in all cases explicitly stated, common target diseases include research to find cure against HIV, dengue, Duchene dystrophy, Parkinson's disease, various types of cancer and influenza. Other diseases include malaria, anthrax, Alzheimer's disease. The need for national initiatives and European Collaboration for larger scale projects is stressed, to raise the awareness of citizens to participate in order to create a culture of internet volunteering altruism.

Participatory Design & Health Information Technology

DEFF Research Database (Denmark)

Health Information Technology (HIT) continues to increase in importance as a component of healthcare provision, but designing HIT is complex. The creation of cooperative learning processes for future HIT users is not a simple task. The importance of engaging end users such as health professionals......, in collaboration with a wide range of people, a broad repertoire of methods and techniques to apply PD within multiple domains has been established. This book, Participatory Design & Health Information Technology, presents the contributions of researchers from 5 countries, who share their experience and insights......, patients and relatives in the design process is widely acknowledged, and Participatory Design (PD) is the primary discipline for directly involving people in the technological design process. Exploring the application of PD in HIT is crucial to all those involved in engaging end users in HIT design and...

SEU blending project, concept to commercial operation, Part 4: engineering design

International Nuclear Information System (INIS)

Ingalls, D.G.; Ioffe, M.S.; Oliver, A.J.; Smith, T.P.; Ozberk, E.

2005-01-01

The process development test program for production of Slightly Enriched Uranium (SEU) dioxide powder and Blend of Dysprosium and Uranium (BDU) oxide powder was initiated almost simultaneously with the conceptual engineering study for the commercial plant in 2001. During the very early phases of the project it was recognized that meeting the challenging requirements would necessitate wide expertise from different departments within the Cameco operations as well as consultants from outside the Company. The project team formed reflected this recognition. The conceptual engineering study was the lead into preparation of the engineering design study in 2003, which provided the process description based on the research and development program being carried out at Cameco Technology Development (CTD), project description, and project cost estimates. The detailed engineering phase commenced in June 2004 and was in progress at the the time when this paper was presented. The detailed engineering phase is addressing all aspects of the commercial plant including all health and safety, environment and security related issues, nuclear safety, training program, all product quality assurance issues, quality management issues, powder and fuel bundle transportation issues, all regulatory requirements, establishing project execution plans and budget, and strategies to control the costs. At the end of the detailed engineering phase, construction packages will be ready for tender, and major pieces of equipment will be selected and procured. (author)

Computer-integrated design and information management for nuclear projects

International Nuclear Information System (INIS)

Gonzalez, A.; Martin-Guirado, L.; Nebrera, F.

1987-01-01

Over the past seven years, Empresarios Agrupados has been developing a comprehensive, computer-integrated system to perform the majority of the engineering, design, procurement and construction management activities in nuclear, fossil-fired as well as hydro power plant projects. This system, which is already in a production environment, comprises a large number of computer programs and data bases designed using a modular approach. Each software module, dedicated to meeting the needs of a particular design group or project discipline, facilitates the performance of functional tasks characteristic of the power plant engineering process

Poster project to emphasize public health in the pharmacy curriculum.

Science.gov (United States)

Kelsch, Michael P; Werremeyer, Amy B

2011-02-10

To implement and assess a required public health poster project in a doctor of pharmacy (PharmD) program. Third-year PharmD students collaborated in pairs to research a public health topic relating to pharmacy practice. Each student group prepared an informational poster, while receiving feedback from a faculty mentor at each stage of the project. The students presented their completed posters at a statewide pharmacy conference. Faculty members evaluated the posters with a grading rubric, and students completed a survey instrument that assessed the overall experience. In general, faculty members rated the class highly across all domains of the grading rubric. The class generally agreed that the poster project increased their awareness of public health issues related to pharmacy practice, overall knowledge of public health, and presentation skills. The implementation of a poster project was well received by students and faculty members as an effective method for enhancing public health instruction in the PharmD program at North Dakota State University.

The health terminology project glossaries` structure

Directory of Open Access Journals (Sweden)

Sátia Marini

2014-04-01

Full Text Available Current paper was motivated by a Master´s degree in Translation Studies on one of the glossaries of the Health Terminology Project (PTS of the Ministry of Health (MS inBrazil, by which the products developed by the project were analyzed. The authors would like to forward their experience earned from the development of these instruments and from the evolution of the glossary´s layout and structure. Although within the same institution, each instrument is made suitable to the specific purpose of each area and the terminology project accumulates experience by the constant improvement of previously developed glossaries (adding new terms; providing the equivalent word in other languages for terms already defined and by the establishment of new ones. The evolution of the structure of the glossaries was qualitatively analyzed; remarks on the types of cross references were made; a quantitative survey of their main features was undertaken. Finally, the importance of this type of work should be underscored either within the government, or in the academy or in private companies, for the sharing of intellectual knowledge.

Pay For Success And Population Health: Early Results From Eleven Projects Reveal Challenges And Promise.

Science.gov (United States)

Lantz, Paula M; Rosenbaum, Sara; Ku, Leighton; Iovan, Samantha

2016-11-01

Pay for success (PFS) is a type of social impact investing that uses private capital to finance proven prevention programs that help a government reduce public expenditures or achieve greater value. We conducted an analysis of the first eleven PFS projects in the United States to investigate the potential of PFS as a strategy for financing and disseminating interventions aimed at improving population health and health equity. The PFS approach has significant potential for bringing private-sector resources to interventions regarding social determinants of health. Nonetheless, a number of challenges remain, including structuring PFS initiatives so that optimal prevention benefits can be achieved and ensuring that PFS interventions and evaluation designs are based on rigorous research principles. In addition, increased policy attention regarding key PFS payout issues is needed, including the "wrong pockets" problem and legal barriers to using federal Medicaid funds as an investor payout source. Project HOPE—The People-to-People Health Foundation, Inc.

Estimating design costs for first-of-a-kind projects

International Nuclear Information System (INIS)

Banerjee, Bakul; Fermilab

2006-01-01

Modern scientific facilities are often outcomes of projects that are first-of-a-kind, that is, minimal historical data are available for project costs and schedules. However, at Fermilab, there was an opportunity to execute two similar projects consecutively. In this paper, a comparative study of the design costs for these two projects is presented using earned value methodology. This study provides some insights into how to estimate the cost of a replicated project

Evaluation of Health Equity Impact of Structural Policies: Overview of Research Methods Used in the SOPHIE Project.

Science.gov (United States)

Kunst, Anton E

2017-07-01

This article briefly assesses the research methods that were applied in the SOPHIE project to evaluate the impact of structural policies on population health and health inequalities. The evaluation of structural policies is one of the key methodological challenges in today's public health. The experience in the SOPHIE project was that mixed methods are essential to identify, understand, and predict the health impact of structural policies. On the one hand, quantitative studies that included spatial comparisons or time trend analyses, preferably in a quasi-experimental design, showed that some structural policies were associated with improved population health and smaller health inequalities. On the other hand, qualitative studies, often inspired by realist approaches, were important to understand how these policies could have achieved the observed impact and why they would succeed in some settings but fail in others. This review ends with five recommendations for future studies that aim to evaluate, understand, and predict how health inequalities can be reduced through structural policies.

A web-based online collaboration platform for formulating engineering design projects

Science.gov (United States)

Varikuti, Sainath

Effective communication and collaboration among students, faculty and industrial sponsors play a vital role while formulating and solving engineering design projects. With the advent in the web technology, online platforms and systems have been proposed to facilitate interactions and collaboration among different stakeholders in the context of senior design projects. However, there are noticeable gaps in the literature with respect to understanding the effects of online collaboration platforms for formulating engineering design projects. Most of the existing literature is focused on exploring the utility of online platforms on activities after the problem is defined and teams are formed. Also, there is a lack of mechanisms and tools to guide the project formation phase in senior design projects, which makes it challenging for students and faculty to collaboratively develop and refine project ideas and to establish appropriate teams. In this thesis a web-based online collaboration platform is designed and implemented to share, discuss and obtain feedback on project ideas and to facilitate collaboration among students and faculty prior to the start of the semester. The goal of this thesis is to understand the impact of an online collaboration platform for formulating engineering design projects, and how a web-based online collaboration platform affects the amount of interactions among stakeholders during the early phases of design process. A survey measuring the amount of interactions among students and faculty is administered. Initial findings show a marked improvement in the students' ability to share project ideas and form teams with other students and faculty. Students found the online platform simple to use. The suggestions for improving the tool generally included features that were not necessarily design specific, indicating that the underlying concept of this collaborative platform provides a strong basis and can be extended for future online platforms

The Current and Projected Taxpayer Shares of US Health Costs.

Science.gov (United States)

Himmelstein, David U; Woolhandler, Steffie

2016-03-01

We estimated taxpayers' current and projected share of US health expenditures, including government payments for public employees' health benefits as well as tax subsidies to private health spending. We tabulated official Centers for Medicare and Medicaid Services figures on direct government spending for health programs and public employees' health benefits for 2013, and projected figures through 2024. We calculated the value of tax subsidies for private spending from official federal budget documents and figures for state and local tax collections. Tax-funded health expenditures totaled $1.877 trillion in 2013 and are projected to increase to $3.642 trillion in 2024. Government's share of overall health spending was 64.3% of national health expenditures in 2013 and will rise to 67.1% in 2024. Government health expenditures in the United States account for a larger share of gross domestic product (11.2% in 2013) than do total health expenditures in any other nation. Contrary to public perceptions and official Centers for Medicare and Medicaid Services estimates, government funds most health care in the United States. Appreciation of government's predominant role in health funding might encourage more appropriate and equitable targeting of health expenditures.

Current issues in the design of academic health sciences libraries: findings from three recent facility projects.

Science.gov (United States)

Nelson, Patricia P

2003-07-01

Planning a new health sciences library at the beginning of the twenty-first century is a tremendous challenge. Technology has radically changed the way libraries function in an academic environment and the services they provide. Some individuals question whether the library as place will continue to exist as information becomes increasingly available electronically. To understand how libraries resolve programming and building design issues, visits were made to three academic health sciences libraries that have had significant renovation or completed new construction. The information gathered will be valuable for planning a new library for the University of Colorado Health Sciences Center and may assist other health sciences librarians as they plan future library buildings.

Design iteration in construction projects – Review and directions

Directory of Open Access Journals (Sweden)

Purva Mujumdar

2018-03-01

Full Text Available Design phase of any construction project involves several designers who exchange information with each other most often in an unstructured manner throughout the design phase. When these information exchanges happen to occur in cycles/loops, it is termed as design iteration. Iteration is an inherent and unavoidable aspect of any design phase which requires proper planning. Till date, very few researchers have explored the design iteration (“complexity” in construction sector. Hence, the objective of this paper was to document and review the complexities of iteration during design phase of construction projects for efficient design planning. To achieve this objective, exhaustive literature review on design iteration was done for four sectors – construction, manufacturing, aerospace, and software development. In addition, semi-structured interviews and discussions were done with a few design experts to verify the different dimensions of iteration. Finally, a design iteration framework was presented in this study that facilitates successful planning. Keywords: Design iteration, Types of iteration, Causes and impact of iteration, Models of iteration, Execution strategies of iteration

Information management needs for Fort Calhoun's design basis reconstitution project

International Nuclear Information System (INIS)

Beach, D.R.; Erickson, E.A.; Gambhir, S.K.; Parsons, R.D.

1989-01-01

While the need for information management is not new to the nuclear industry or Omaha Public Power District (OPPD), the interrelationship among design information, multiple systems, and design basis issues has necessitated the management of this information in new ways. The project team involved in the reconstitution of the design basis for OPPD's Fort Calhoun nuclear station has experienced the need for the developed effective methods for managing the vast amount of interrelated information associated with this effort. This management of information has been necessary to ensure that design basis documents (DBDs) adequately reflect the interrelated nature of component, system, and plant design; are complete and accurate; and are produced and maintained in a cost-effective manner. Fort Calhoun's aggressive design basis reconstitution project began in early 1987. The present scope of the project includes the production of 52 system and plant level DBDs; currently the project is ∼50% complete with DBDs in various stages of completion, from pilot DBDs through DBDs with approved formats, which have been issued for use. The experience in producing these documents has lead to a growing understanding of the special need for information management in each stage of the project. The development of the information tracking and management processes for the various stages of DBD development has proven to be cost-effective and gives a level of assurance that information has been included in the DBDs consistently and accurately

Designing forestry projects for climate action plan implementation

Energy Technology Data Exchange (ETDEWEB)

Sampson, R.N. [American Forests, Washington, DC (United States)

1995-11-01

Forests play an important role in sequestering and storing carbon in terrestrial ecosystems, so countries considering ways to mitigate greenhouse gas emissions are looking at forestry projects as one option. Designing forestry projects that accomplish desired goals is no simple task however, as many past failures attest. This paper proposes that, to be successful, climate change mitigation forestry projects need to: (a) feature other socially, economically and environmentally desirable goals as primary motivators; (b) be designed in cooperation with, and in the interests of, local populations, and (c), feature cooperative efforts between government, industry, and volunteer associations. Volunteer associations can often be assisted in being a more capable partner through an organizational training and support process, and this is one of the services offered to cooperating countries through American Forests. 21 refs.

Instructional Design and Project Management: Complementary or Divergent?

Science.gov (United States)

van Rooij, Shahron Williams

2011-01-01

This paper reports the results of a study to identify the extent to which organizations that develop educational/training products are committed to project management, as measured by their project management implementation maturity, as a methodology that is separate and distinct from the processes of instructional design. A Web survey was…

Design review plan for Multi-Function Waste Tank Facility (Project W-236A)

International Nuclear Information System (INIS)

Renfro, G.G.

1994-01-01

This plan describes how the Multi-Function Waste Tank Facility (MWTF) Project conducts reviews of design media; describes actions required by Project participants; and provides the methodology to ensure that the design is complete, meets the technical baseline of the Project, is operable and maintainable, and is constructable. Project W-236A is an integrated project wherein the relationship between the operating contractor and architect-engineer is somewhat different than that of a conventional project. Working together, Westinghouse Hanford Company (WHC) and ICF Karser Hanford (ICF KH) have developed a relationship whereby ICF KH performs extensive design reviews and design verification. WHC actively participates in over-the-shoulder reviews during design development, performs a final review of the completed design, and conducts a formal design review of the Safety Class I, ASME boiler and Pressure Vessel Code items in accordance with WHC-CM-6-1, Standard Engineering Practices

Group Projects in Interior Design Studio Classes: Peer Feedback Benefits

Science.gov (United States)

Jurado, Juan A.

2011-01-01

Group projects have been shown to be effective for providing peer feedback in classrooms. While students in regular enrollment classes benefit from peer feedback, low-enrollment classes face many challenges. This study compares peer feedback effectiveness between two interior design studio classes with different design projects. In one class,…

Building a Creative Ecosystem: The Young Designers on Location Project

Science.gov (United States)

Davies, Dan; Howe, Alan; Haywood, Susan

2004-01-01

This article reports on findings from a research project designed to explore ways in which creativity can be fostered through interactions between selected children, particular environments, materials, techniques and key adults. The Young Designers on Location (YDoL) project was funded by the National Endowment for Science, Technology and the Arts…

Design and initial implementation of the WHO FP umbrella project- to strengthen contraceptive services in the sub Saharan Africa.

Science.gov (United States)

Kabra, Rita; Ali, Moazzam; Kiarie, James

2017-06-15

Strengthening contraceptive services in sub Saharan Africa is critical to achieve the FP 2020 goal of enabling 120 million more women and girls to access and use contraceptives by 2020 and the Sustainable Development Goals (SDG) targets of universal access to sexual and reproductive health (SRH) services including family planning by 2030. The World Health Organization (WHO) and partners have designed a multifaceted project to strengthen health systems to reduce the unmet need of contraceptive and family planning services in sub Saharan Africa. The plan leverages global, regional and national partnerships to facilitate and increase the use of evidence based WHO guidelines with a specific focus on postpartum family planning. The four key approaches undertaken are i) making WHO Guidelines adaptable & appropriate for country use ii) building capacity of WHO regional/country staff iii) providing technical support to countries and iv) strengthening partnerships for introduction and implementation of WHO guidelines. This paper describes the project design and elaborates the multifaceted approaches required in initial implementation to strengthen contraceptive services. The initial results from this project reflect that simultaneous application these approaches may strengthen contraceptive services in Sub Saharan Africa and ensure sustainability of the efforts. The lessons learned may be used to scale up and expand services in other countries.

Design considerations for the Yucca Mountain project exploratory shaft facility

International Nuclear Information System (INIS)

Bullock, R.L. Sr.

1990-01-01

This paper reports on the regulatory/requirements challenges of this project which exist because this is the first facility of its kind to ever be planned, characterized, designed, and built under the purview of a U.S. Nuclear Regulatory Agency. The regulations and requirements that flow down to the Architect/Engineer (A/E) for development of the Exploratory Shaft Facility (ESF) design are voluminous and unique to this project. The subsurface design and construction of the ESF underground facility may eventually become a part of the future repository facility and, if so, will require licensing by the Nuclear Regulatory Commission (NRC). The Fenix and Scisson of Nevada-Yucca Mountain Project (FSN-YMP) group believes that all of the UMP design and construction related activities, with good design/construct control, can be performed to meet all engineering requirements, while following a strict quality assurance program that will also meet regulatory requirements

Copenhagen infant mental health project

DEFF Research Database (Denmark)

Væver, Mette Skovgaard; Smith-Nielsen, Johanne; Lange, Theis

2016-01-01

such as physical and mental health, educational and labor market success, social network and establishing of family. Secure attachment is associated with optimal outcomes in all developmental domains in childhood, and both insecure and disorganized attachment are associated with a range of later problems......Background: Infant mental health is a significant public health issue as early adversity and exposure to early childhood stress are significant risk factors that may have detrimental long-term developmental consequences for the affected children. Negative outcomes are seen on a range of areas...... in the City of Copenhagen, Denmark. During the project a general population of an estimated 17.600 families with an infant aged 2–12 months are screened for two known infant mental health risks, maternal postnatal depression and infant social withdrawal. Eligible families (N = 314), who agree to participate...

Preliminary design report: Prototypical Spent Fuel Consolidation Equipment Demonstration Project: Phase 1

International Nuclear Information System (INIS)

Blissell, W.H.; Ciez, A.P.; Mitchell, J.L.; Winkler, C.J.

1986-12-01

This document describes the Westinghouse Preliminary Design for the Prototypical Consolidation Demonstration Project per Department of Energy (DOE) Contract No. DE-AC07-86ID12649 and under direction of the DOE Idaho Operations Office. The preliminary design is the first step to providing the Department of Energy with a fully qualified, licensable, cost-effective spent fuel rod consolidation system. The design was developed using proven technologies and equipment to create an innovative approach to previous rod consolidation concepts. These innovations will better enable the Westinghouse system to: consolidate fuel rods in a precise, fully-controlled, accountable manner; package all rods from two PWR fuel assemblies or from four BWR fuel assemblies in one 8.5 inch square consolidated rods canister; meet all functional requirements; operate with all fuel types common to the US commercial nuclear industry with minimal tooling changeouts; and meet consolidation production process rates, while maintaining operator and public health and safety. This Preliminary Design Report provides both detailed descriptions of the equipment required to perform the rod consolidation process and the supporting analyses to validate the design

Designing pilot projects as boundary objects a Brazilian case study in the promotion of sustainable design

CERN Document Server

Zurlo, Francesco

2016-01-01

This book describes a collaborative Design Pilot Project held in Brazil (called MODU.Lares) involving micro and small enterprises and other actors in the furniture sector. The experience was based on an action research method and evaluated by using a tool, in order to assess the value of pilot project as a boundary object capable of fostering innovation and sustainability. The impact of the Design Pilot Project in triggering change in a fragmented local system with a poor environmental and social record, as well as management and innovation issues, were assessed with the help of the same tool, taking into account environmental, technological, economic, sociocultural, and organizational indicators. The collaborative network established was chiefly based on four elements: prototypes, meetings, exhibitions and the Pilot Project (as an overall process). The results indeed demonstrate that a Design Pilot Project can be a valid instrument for establishing a collaborative environment that promotes sustainability an...

Management of natural health products in pediatrics: a provider-focused quality improvement project.

Science.gov (United States)

Gutierrez, Emily; Silbert-Flagg, JoAnne; Vohra, Sunita

2015-01-01

The use of natural health products by pediatric patients is common, yet health care providers often do not provide management guidance. The purpose of this project was to improve management of natural health products by pediatric nurse practitioners. Pediatric nurse practitioners from large metropolitan city were recruited (n = 32). A paired pretest-posttest design was used. Study participants were engaged to improve knowledge of natural health products, and a management toolkit was created and tested. Mean knowledge scores increased from 59.19 to 76.3 (p improved with regard to patient guidance (p product use (p = .51) and drug/herb interactions (p = .35) were not significant. This investigation is the first known study to improve knowledge and management of natural health products in pediatric clinical practice. Copyright © 2015 National Association of Pediatric Nurse Practitioners. Published by Elsevier Inc. All rights reserved.

Presenting evidence-based health information for people with multiple sclerosis: the IN-DEEP project protocol

Directory of Open Access Journals (Sweden)

Hill Sophie

2012-03-01

Full Text Available Abstract Background Increasingly, evidence-based health information, in particular evidence from systematic reviews, is being made available to lay audiences, in addition to health professionals. Research efforts have focused on different formats for the lay presentation of health information. However, there is a paucity of data on how patients integrate evidence-based health information with other factors such as their preferences for information and experiences with information-seeking. The aim of this project is to explore how people with multiple sclerosis (MS integrate health information with their needs, experiences, preferences and values and how these factors can be incorporated into an online resource of evidence-based health information provision for people with MS and their families. Methods This project is an Australian-Italian collaboration between researchers, MS societies and people with MS. Using a four-stage mixed methods design, a model will be developed for presenting evidence-based health information on the Internet for people with MS and their families. This evidence-based health information will draw upon systematic reviews of MS interventions from The Cochrane Library. Each stage of the project will build on the last. After conducting focus groups with people with MS and their family members (Stage 1, we will develop a model for summarising and presenting Cochrane MS reviews that is integrated with supporting information to aid understanding and decision making. This will be reviewed and finalised with people with MS, family members, health professionals and MS Society staff (Stage 2, before being uploaded to the Internet and evaluated (Stages 3 and 4. Discussion This project aims to produce accessible and meaningful evidence-based health information about MS for use in the varied decision making and management situations people encounter in everyday life. It is expected that the findings will be relevant to broader

Presenting evidence-based health information for people with multiple sclerosis: the IN-DEEP project protocol.

Science.gov (United States)

Hill, Sophie; Filippini, Graziella; Synnot, Anneliese; Summers, Michael; Beecher, Deirdre; Colombo, Cinzia; Mosconi, Paola; Battaglia, Mario A; Shapland, Sue; Osborne, Richard H; Hawkins, Melanie

2012-03-16

Increasingly, evidence-based health information, in particular evidence from systematic reviews, is being made available to lay audiences, in addition to health professionals. Research efforts have focused on different formats for the lay presentation of health information. However, there is a paucity of data on how patients integrate evidence-based health information with other factors such as their preferences for information and experiences with information-seeking. The aim of this project is to explore how people with multiple sclerosis (MS) integrate health information with their needs, experiences, preferences and values and how these factors can be incorporated into an online resource of evidence-based health information provision for people with MS and their families. This project is an Australian-Italian collaboration between researchers, MS societies and people with MS. Using a four-stage mixed methods design, a model will be developed for presenting evidence-based health information on the Internet for people with MS and their families. This evidence-based health information will draw upon systematic reviews of MS interventions from The Cochrane Library. Each stage of the project will build on the last. After conducting focus groups with people with MS and their family members (Stage 1), we will develop a model for summarising and presenting Cochrane MS reviews that is integrated with supporting information to aid understanding and decision making. This will be reviewed and finalised with people with MS, family members, health professionals and MS Society staff (Stage 2), before being uploaded to the Internet and evaluated (Stages 3 and 4). This project aims to produce accessible and meaningful evidence-based health information about MS for use in the varied decision making and management situations people encounter in everyday life. It is expected that the findings will be relevant to broader efforts to provide evidence-based health information for

Breckinridge Project, initial effort. Report VII, Volume 4. Safety and health plan

Energy Technology Data Exchange (ETDEWEB)

None

1982-01-01

The Safety and Health Plan recognizes the potential hazards associated with the Project and has been developed specifically to respond to these risks in a positive manner. Prevention, the primary objective of the Plan, starts with building safety controls into the process design and continues through engineering, construction, start-up, and operation of the Project facilities and equipment. Compliance with applicable federal, state, and local health and safety laws, regulations, and codes throughout all Project phases is required and assured. The Plan requires that each major Project phase be thoroughly reviewed and analyzed to determine that those provisions required to assure the safety and health of all employees and the public, and to prevent property and equipment losses, have been provided. The Plan requires followup on those items or situations where corrective action needs were identified to assure that the action was taken and is effective. Emphasis is placed on loss prevention. Exhibit 1 provides a breakdown of Ashland Synthetic Fuels, Inc.'s (ASFI's) Loss Prevention Program. The Plan recognizes that the varied nature of the work is such as to require the services of skilled, trained, and responsible personnel who are aware of the hazards and know that the work can be done safely, if done correctly. Good operating practice is likewise safe operating practice. Training is provided to familiarize personnel with good operational practice, the general sequence of activities, reporting requirements, and above all, the concept that each step in the operating procedures must be successfully concluded before the following step can be safely initiated. The Plan provides for periodic review and evaluation of all safety and loss prevention activities at the plant and departmental levels.

Problem based Learning versus Design Thinking in Team based Project work

DEFF Research Database (Denmark)

Denise J. Stokholm, Marianne

2014-01-01

project based learning issues, which has caused a need to describe and compare the two models; in specific the understandings, approaches and organization of learning in project work. The PBL model viewing the process as 3 separate project stages including; problem analysis, problem solving and project......All educations at Aalborg University has since 1974 been rooted in Problem Based Learning (PBL). In 1999 a new education in Industrial design was set up, introducing Design Based Learning (DBL). Even though the two approaches have a lot in common they also hold different understandings of core...... report, with focus on problem solving through analysis. Design Based Learning viewing the process as series of integrated design spaces including; alignment, research, mission, vision, concept, product and process report, with focus on innovative ideation though integration. There is a need of renewing...

Spent Nuclear Fuel (SNF) Project Design Verification and Validation Process

International Nuclear Information System (INIS)

OLGUIN, L.J.

2000-01-01

This document provides a description of design verification and validation activities implemented by the Spent Nuclear Fuel (SNF) Project. During the execution of early design verification, a management assessment (Bergman, 1999) and external assessments on configuration management (Augustenburg, 1999) and testing (Loscoe, 2000) were conducted and identified potential uncertainties in the verification process. This led the SNF Chief Engineer to implement corrective actions to improve process and design products. This included Design Verification Reports (DVRs) for each subproject, validation assessments for testing, and verification of the safety function of systems and components identified in the Safety Equipment List to ensure that the design outputs were compliant with the SNF Technical Requirements. Although some activities are still in progress, the results of the DVR and associated validation assessments indicate that Project requirements for design verification are being effectively implemented. These results have been documented in subproject-specific technical documents (Table 2). Identified punch-list items are being dispositioned by the Project. As these remaining items are closed, the technical reports (Table 2) will be revised and reissued to document the results of this work

Application of project design peer review to improve quality assurance

International Nuclear Information System (INIS)

McClure, F.E.

1989-01-01

DOE ORDER 5481.1B Safety Analysis and Review Systems and DOE ORDER 6430.1A General Design Criteria require that the design of facilities shall incorporate the necessary Quality Assurance review requirements to assure that the established program quality assurance objectives are met in the design criteria and the construction documents. The use of Project Design Peer Review to satisfy these requirements is presented. The University of California manages the Lawrence Berkeley Laboratory, the Lawrence Livermore National Laboratory, and the Los Alamos National Scientific Laboratory. The 1988 University Seismic Safety Policy requires the use of independent Project Design Peer Review in its capital improvement and seismic reconstruction program

Delft Aerospace Design Projects 2015 : Challenging New Designs in Aeronautics, Astronautics and Wind Energy

NARCIS (Netherlands)

Melkert, J.A.

2015-01-01

This book presents an overview of the results of the Fall Design Synthesis Exercise 2014 and the Spring Design Synthesis Exercise of 2015, based on summaries of each of the projects. The Design Synthesis Exercise Coordination Committee, responsible for the organisation and execution of the exercise,

The military health system's personal health record pilot with Microsoft HealthVault and Google Health.

Science.gov (United States)

Do, Nhan V; Barnhill, Rick; Heermann-Do, Kimberly A; Salzman, Keith L; Gimbel, Ronald W

2011-01-01

To design, build, implement, and evaluate a personal health record (PHR), tethered to the Military Health System, that leverages Microsoft® HealthVault and Google® Health infrastructure based on user preference. A pilot project was conducted in 2008-2009 at Madigan Army Medical Center in Tacoma, Washington. Our PHR was architected to a flexible platform that incorporated standards-based models of Continuity of Document and Continuity of Care Record to map Department of Defense-sourced health data, via a secure Veterans Administration data broker, to Microsoft® HealthVault and Google® Health based on user preference. The project design and implementation were guided by provider and patient advisory panels with formal user evaluation. The pilot project included 250 beneficiary users. Approximately 73.2% of users were Microsoft® HealthVault, and 81 (32.4%) selected Google® Health as their PHR of preference. Sample evaluation of users reflected 100% (n = 60) satisfied with convenience of record access and 91.7% (n = 55) satisfied with overall functionality of PHR. Key lessons learned related to data-transfer decisions (push vs pull), purposeful delays in reporting sensitive information, understanding and mapping PHR use and clinical workflow, and decisions on information patients may choose to share with their provider. Currently PHRs are being viewed as empowering tools for patient activation. Design and implementation issues (eg, technical, organizational, information security) are substantial and must be thoughtfully approached. Adopting standards into design can enhance the national goal of portability and interoperability.

A series of student design projects for improving and modernizing safety helmets

NARCIS (Netherlands)

Beurden, van K.M.M. (Karin); Boer, de J. (Johannes); Stilma, M. (Margot); Teeuw, W.B. (Wouter)

2014-01-01

The Saxion Research Centre for Design and Technology employs many students during research projects. This paper discusses a series of student design projects on safety helmets in the Safety@Work project. At construction sites workers are required to wear personal protective equipment during their

[Subtainable health promotion via organisational development--a model project for teachers in professional training schools].

Science.gov (United States)

Schumacher, L; Nieskens, B; Bräuer, H; Sieland, B

2005-02-01

The goal of this project is the development, implementation and evaluation of a concept designed for sustainable health promotion among occupational and trade school teachers. We assume that for sustainable health promotion -- along with a behavioral prevention program -- a change is necessary in the structure, as well as, the working and communication processes within schools. The realization of early teacher participation and self regulated cooperative groups initiates comprehensive and goal-oriented developmental processes in the project schools. The organizational development process was accomplished in the following way: At the beginning we conducted a diagnosis of school-specific and individual health risks and the resources available to the project schools. The results were reported for both the individual and for the teacher group. This was intended to clarify the potential for improvement and, thus, strengthen the teachers' motivation toward processes of change. Following the diagnosis, the teachers chose areas of stress-related strain and then worked in groups to develop and implement behaviour and working condition-oriented intervention strategies for health promotion. The diagnosis results confirm the necessity of school-specific health promotion: the schools demonstrate very different demand and resource profiles. Furthermore, is has become evident that the central success factor for health promotion in schools is the teachers' willingness for change. The individual and group reports of the diagnosis results seem to have made clear how essential individual and organisational changes are.

Project Assessment Framework through Design (PAFTD) - A Project Assessment Framework in Support of Strategic Decision Making

Science.gov (United States)

Depenbrock, Brett T.; Balint, Tibor S.; Sheehy, Jeffrey A.

2014-01-01

Research and development organizations that push the innovation edge of technology frequently encounter challenges when attempting to identify an investment strategy and to accurately forecast the cost and schedule performance of selected projects. Fast moving and complex environments require managers to quickly analyze and diagnose the value of returns on investment versus allocated resources. Our Project Assessment Framework through Design (PAFTD) tool facilitates decision making for NASA senior leadership to enable more strategic and consistent technology development investment analysis, beginning at implementation and continuing through the project life cycle. The framework takes an integrated approach by leveraging design principles of useability, feasibility, and viability and aligns them with methods employed by NASA's Independent Program Assessment Office for project performance assessment. The need exists to periodically revisit the justification and prioritization of technology development investments as changes occur over project life cycles. The framework informs management rapidly and comprehensively about diagnosed internal and external root causes of project performance.

Introducing Project-Based Learning to Design Enterprises for Creativity

DEFF Research Database (Denmark)

Wang, Feng; Zhou, Chunfang; Chen, Hongbing

2013-01-01

This paper aims to emphasize the necessity of introducing Project-Based Learning (PBL) to design enterprises in order to foster designers creativity and facilitate innovation of design enterprises. According to the literature review, creativity can be viewed as the first stage of innovation; PBL...

42 CFR 137.365 - What is the procedure for the Secretary's review and approval of project planning and design...

Science.gov (United States)

2010-10-01

... SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of the...-Governance Tribe? (a) The Secretary shall review and approve planning documents to ensure compliance with... design documents for general compliance with requirements of the construction project agreement. (b) The...

Education projects: an opportunity for student fieldwork in global health academic programs.

Science.gov (United States)

Fyfe, Molly V

2012-01-01

Universities, especially in higher-income countries, increasingly offer programs in global health. These programs provide different types of fieldwork projects, at home and abroad, including: epidemiological research, community health, and clinical electives. I illustrate how and why education projects offer distinct learning opportunities for global health program fieldwork. As University of California students, we partnered in Tanzania with students from Muhimbili University of Health and Allied Science (MUHAS) to assist MUHAS faculty with a curricular project. We attended classes, clinical rounds, and community outreach sessions together, where we observed teaching, materials used, and the learning environment; and interviewed and gathered data from current students, alumni, and health professionals during a nationwide survey. We learned together about education of health professionals and health systems in our respective institutions. On the basis of this experience, I suggest some factors that contribute to the productivity of educational projects as global health fieldwork.

The State of Open Source Electronic Health Record Projects: A Software Anthropology Study.

Science.gov (United States)

Alsaffar, Mona; Yellowlees, Peter; Odor, Alberto; Hogarth, Michael

2017-02-24

, health care providers in their careers. In addition, 45% (45/99) of developers do not work in the health care field. The research presented in this study highlights some challenges that may be hindering the future of health care F/OSS. A minority of developers have been health care professionals, and only 55% (54/99) work in the health care field. This undoubtedly limits the ability of functional design of F/OSS EHR systems from being a competitive advantage over prevailing commercial EHR systems. Open source software seems to be a significant interest to many; however, given that only four F/OSS EHR systems are ONC-certified, this interest is unlikely to yield significant adoption of these systems in the United States. Although the Health Information Technology for Economic and Clinical Health (HITECH) act was responsible for a substantial infusion of capital into the EHR marketplace, the lack of a corporate entity in most F/OSS EHR projects translates to a marginal capacity to market the respective F/OSS system and to navigate certification. This likely has further disadvantaged F/OSS EHR adoption in the United States. ©Mona Alsaffar, Peter Yellowlees, Alberto Odor, Michael Hogarth. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 24.02.2017.

Quality Improvement Project to Improve Patient Satisfaction With Pain Management: Using Human-Centered Design.

Science.gov (United States)

Trail-Mahan, Tracy; Heisler, Scott; Katica, Mary

2016-01-01

In this quality improvement project, our health system developed a comprehensive, patient-centered approach to improving inpatient pain management and assessed its impact on patient satisfaction across 21 medical centers. Using human-centered design principles, a bundle of 6 individual and team nursing practices was developed. Patient satisfaction with pain management, as measured by the Hospital Consumer Assessment of Healthcare Providers and Systems pain composite score, increased from the 25th to just under the 75th national percentile.

Design for Sustainability and Project Management Literature – A Review

DEFF Research Database (Denmark)

Ali, Faheem; Boks, Casper; Bey, Niki

2016-01-01

management literature has hardly been considered in design for sustainability research, this article attempts to review the points of intersection between these two fields, and explores the potential that knowledge from project management literature has in improving efficiency and effectiveness...... of development and implementation of design for sustainability tools.......The growing pressure on natural resources and increasing global trade have made sustainability issues a prime area of concern for all businesses alike. The increased focus on sustainability has impacted the way projects are conceived, planned, executed and evaluated in industries. Since project...

A prospective evaluation of first people's health promotion program design in the goulburn-murray rivers region.

Science.gov (United States)

Doyle, Joyce; Atkinson-Briggs, Sharon; Atkinson, Petah; Firebrace, Bradley; Calleja, Julie; Reilly, Rachel; Cargo, Margaret; Riley, Therese; Crumpen, Tui; Rowley, Kevin

2016-11-10

Aboriginal Community Controlled Organisations (ACCOs) provide community-focussed and culturally safe services for First Peoples in Australia, including crisis intervention and health promotion activities, in a holistic manner. The ecological model of health promotion goes some way towards describing the complexity of such health programs. The aims of this project were to: 1) identify the aims and purpose of existing health promotion programs conducted by an alliance of ACCOs in northern Victoria, Australia; and 2) evaluate the extent to which these programs are consistent with an ecological model of health promotion, addressing both individual and environmental determinants of health. The project arose from a long history of collaborative research. Three ACCOs and a university formed the Health Promotion Alliance to evaluate their health promotion programs. Local community members were trained in, and contributed to developing culturally sensitive methods for, data collection. Information on the aims and design of 88 health promotion activities making up 12 different programs across the ACCOs was systematically and prospectively collected. There was a wide range of activities addressing environmental and social determinants of health, as well as physical activity, nutrition and weight loss. The design of the great majority of activities had a minimal Western influence and were designed within a local Aboriginal cultural framework. The most common focus of the activities was social connectedness (76 %). Physical activity was represented in two thirds of the activities, and nutrition, weight loss and culture were each a focus of about half of the activities. A modified coding procedure designed to assess the ecological nature of these programs showed that they recruited from multiple settings; targeted a range of individual, social and environmental determinants; and used numerous and innovative strategies to achieve change. First Peoples' health promotion in the

Advancing food, nutrition, and health research in Europe by connecting and building research infrastructures in a DISH-RI: Results of the EuroDISH project

DEFF Research Database (Denmark)

Snoek, Harriëtte M.; Eijssen, Lars M.T.; Geurts, Marjolein

2018-01-01

more effectively. Approach In the EuroDISH project we mapped existing RIs in the food and health area in Europe, identified outstanding needs, and synthesised this into a conceptual design of a pan-European DISH-RI. The DISH model was used to describe and structure the research area: Determinants...... of food choice, Intake of foods and nutrients, Status and functional markers of nutritional health, and Health and disease risk. Key findings The need to develop RIs in the food and health domain clearly emerged from the EuroDISH project. It showed the necessity for a unique interdisciplinary and multi......Background Research infrastructures (RIs) are essential to advance research on the relationship between food, nutrition, and health. RIs will facilitate innovation and allow insights at the systems level which are required to design (public health) strategies that will address societal challenges...

Children's Health and Indoor Air Quality in Primary Schools and Homes in Portugal-Study Design.

Science.gov (United States)

Madureira, Joana; Paciência, Inês; Ramos, Elisabete; Barros, Henrique; Pereira, Cristiana; Teixeira, João Paulo; Fernandes, Eduardo de Oliveira

2015-01-01

The main aim of the research project "On the Contribution of Schools to Children's Overall Indoor Air Exposure" is to study associations between adverse health effects, namely, allergy, asthma, and respiratory symptoms, and indoor air pollutants to which children are exposed to in primary schools and homes. Specifically, this investigation reports on the design of the study and methods used for data collection within the research project and discusses factors that need to be considered when designing such a study. Further, preliminary findings concerning descriptors of selected characteristics in schools and homes, the study population, and clinical examination are presented. The research project was designed in two phases. In the first phase, 20 public primary schools were selected and a detailed inspection and indoor air quality (IAQ) measurements including volatile organic compounds (VOC), aldehydes, particulate matter (PM2.5, PM10), carbon dioxide (CO2), carbon monoxide (CO), bacteria, fungi, temperature, and relative humidity were conducted. A questionnaire survey of 1600 children of ages 8-9 years was undertaken and a lung function test, exhaled nitric oxide (eNO), and tear film stability testing were performed. The questionnaire focused on children's health and on the environment in their school and homes. One thousand and ninety-nine questionnaires were returned. In the second phase, a subsample of 68 children was enrolled for further studies, including a walk-through inspection and checklist and an extensive set of IAQ measurements in their homes. The acquired data are relevant to assess children's environmental exposures and health status.

Application of project management methodology in design management of nuclear safety related structure

International Nuclear Information System (INIS)

Chen Mao

2004-01-01

This paper focuses on the application of project management methodology in the design management of Nuclear Safety Related Structure (NSRS), considering the design management features of its civil construction. Based on the experiences from the management of several projects, the project management triangle is proposed to be used in the management, to well treat the position of design interface in the project management. Some other management methods are also proposed

Health by Design: Interweaving Health Promotion into Environments and Settings

Science.gov (United States)

Springer, Andrew E.; Evans, Alexandra E.; Ortuño, Jaquelin; Salvo, Deborah; Varela Arévalo, Maria Teresa

2017-01-01

The important influence of the environmental context on health and health behavior—which includes place, settings, and the multiple environments within place and settings—has directed health promotion planners from a focus solely on changing individuals, toward a focus on harnessing and changing context for individual and community health promotion. Health promotion planning frameworks such as Intervention Mapping provide helpful guidance in addressing various facets of the environmental context in health intervention design, including the environmental factors that influence a given health condition or behavior, environmental agents that can influence a population’s health, and environmental change methods. In further exploring how to harness the environmental context for health promotion, we examine in this paper the concept of interweaving of health promotion into context, defined as weaving or blending together health promotion strategies, practices, programs, and policies to fit within, complement, and build from existing settings and environments. Health promotion interweaving stems from current perspectives in health intervention planning, improvement science and complex systems thinking by guiding practitioners from a conceptualization of context as a backdrop to intervention, to one that recognizes context as integral to the intervention design and to the potential to directly influence health outcomes. In exploring the general approach of health promotion interweaving, we examine selected theoretical and practice-based interweaving concepts in relation to four key environments (the policy environment, the information environment, the social/cultural/organizational environment, and the physical environment), followed by evidence-based and practice-based examples of health promotion interweaving from the literature. Interweaving of health promotion into context is a common practice for health planners in designing health promotion interventions, yet

Exploring the dynamics of ownership in community-oriented design projects

DEFF Research Database (Denmark)

Light, Ann; Hansen, Nicolai Brodersen; Halskov, Kim

2013-01-01

This paper contributes an exploration of ownership as a dynamic process in community-oriented projects. We use case study accounts of two design projects to consider participation in contexts where social structure is relevant to design outcomes. In studying these dynamics, we consider four aspec...... community groups in making internet radio podcasts to share insight. We examine the complexity of the social process involved and trace patterns of change, before concluding with pragmatic and ethical reasons for technology design to pay attention to ownership issues....

Community health outreach program of the Chad-Cameroon petroleum development and pipeline project.

Science.gov (United States)

Utzinger, Jürg; Wyss, Kaspar; Moto, Daugla D; Tanner, Marcel; Singer, Burton H

2004-02-01

A critical appraisal has been presented of the CHOP for a large-scale energy infrastructure development project that was implemented in two of the world's poorest countries. The project is under close scrutiny from various independent monitoring groups, civil society organizations, and human rights groups. Reviewing the achievements and shortcomings permits the extraction of important lessons that will be critical for the future adoption of the CHOP in the current setting and for the implementation of additional CHOPs elsewhere in the developing world. The authors believe that the design must be flexible, efficient, and innovative so that a CHOP promptly can address pressing public health issues as they arise (eg, epidemic outbreak) and include the needs and demands of the concerned communities. An innovative feature of the current project is the high degree and mix of public-private partnerships. The project's CHOP also relies on partnerships. As elaborated elsewhere, public-private partnerships should be seen as a social experiment--they reveal promise but are not the solution for every problem. For this CHOP, the focus is on partnerships between a multinational consortium, government agencies, and international organizations. The partnerships also include civil society organizations for monitoring and evaluation and local NGOs designated for the implementation of the selected public health interventions within the CHOP. The governments and their respective health policies often form the umbrella under which the partnerships operate. With the increase in globalization, however, the importance and capacities of governments have diminished, and there is growing private-sector involvement. Private enterprise is seen as an efficient, innovative, pragmatic, and powerful means to achieve environmental and social sustainability. Experiences with the partnership configurations in the current CHOP are of importance for tackling grand challenges in global health by

A systematic approach for analysis and design of secure health information systems.

Science.gov (United States)

Blobel, B; Roger-France, F

2001-06-01

A toolset using object-oriented techniques including the nowadays popular unified modelling language (UML) approach has been developed to facilitate the different users' views for security analysis and design of health care information systems. Paradigm and concepts used are based on the component architecture of information systems and on a general layered security model. The toolset was developed in 1996/1997 within the ISHTAR project funded by the European Commission as well as through international standardisation activities. Analysing and systematising real health care scenarios, only six and nine use case types could be found in the health and the security-related view, respectively. By combining these use case types, the analysis and design of any thinkable system architecture can be simplified significantly. Based on generic schemes, the environment needed for both communication and application security can be established by appropriate sets of security services and mechanisms. Because of the importance and the basic character of electronic health care record (EHCR) systems, the understanding of the approach is facilitated by (incomplete) examples for this application.

Designing digital health information in a health literacy context

NARCIS (Netherlands)

Meppelink, C.S.

2016-01-01

Digital health information is widely available, but not everyone fully benefits due to limited health literacy. Until now, little was known about how health literacy influences information processing and how design features of digital health information can be used to create optimal health messages

Case study B. Architectural design management using a project web

NARCIS (Netherlands)

DeClerck, F.; Pels, H.J.; Otter, den A.F.H.J.; Emmitt, S.; Prins, M.; Otter, den A.F.

2009-01-01

In this chapter the use and organization of use of a project website is described in the design and realization of a construction project. The case concerns a complicated project with a high number of different parties involved, managed by an architectural office and having an internationally

Evaluation of current Australian health service accreditation processes (ACCREDIT-CAP): protocol for a mixed-method research project.

Science.gov (United States)

Hinchcliff, Reece; Greenfield, David; Moldovan, Max; Pawsey, Marjorie; Mumford, Virginia; Westbrook, Johanna Irene; Braithwaite, Jeffrey

2012-01-01

Accreditation programmes aim to improve the quality and safety of health services, and have been widely implemented. However, there is conflicting evidence regarding the outcomes of existing programmes. The Accreditation Collaborative for the Conduct of Research, Evaluation and Designated Investigations through Teamwork-Current Accreditation Processes (ACCREDIT-CAP) project is designed to address key gaps in the literature by evaluating the current processes of three accreditation programmes used across Australian acute, primary and aged care services. The project comprises three mixed-method studies involving documentary analyses, surveys, focus groups and individual interviews. Study samples will comprise stakeholders from across the Australian healthcare system: accreditation agencies; federal and state government departments; consumer advocates; professional colleges and associations; and staff of acute, primary and aged care services. Sample sizes have been determined to ensure results allow robust conclusions. Qualitative information will be thematically analysed, supported by the use of textual grouping software. Quantitative data will be subjected to a variety of analytical procedures, including descriptive and comparative statistics. The results are designed to inform health system policy and planning decisions in Australia and internationally. The project has been approved by the University of New South Wales Human Research Ethics Committee (approval number HREC 10274). Results will be reported to partner organisations, healthcare consumers and other stakeholders via peer-reviewed publications, conference and seminar presentations, and a publicly accessible website.

Designing smart analytical data services for a personal health framework.

Science.gov (United States)

Koumakis, Lefteris; Kondylakis, Haridimos; Chatzimina, Maria; Iatraki, Galatia; Argyropaidas, Panagiotis; Kazantzaki, Eleni; Tsiknakis, Manolis; Kiefer, Stephan; Marias, Kostas

2016-01-01

Information in the healthcare domain and in particular personal health record information is heterogeneous by nature. Clinical, lifestyle, environmental data and personal preferences are stored and managed within such platforms. As a result, significant information from such diverse data is difficult to be delivered, especially to non-IT users like patients, physicians or managers. Another issue related to the management and analysis is the volume, which increases more and more making the need for efficient data visualization and analysis methods mandatory. The objective of this work is to present the architectural design for seamless integration and intelligent analysis of distributed and heterogeneous clinical information in the PHR context, as a result of a requirements elicitation process in iManageCancer project. This systemic approach aims to assist health-care professionals to orient themselves in the disperse information space and enhance their decision-making capabilities, to encourage patients to have an active role by managing their health information and interacting with health-care professionals.

Using mixed methods research designs in health psychology: an illustrated discussion from a pragmatist perspective.

Science.gov (United States)

Bishop, Felicity L

2015-02-01

To outline some of the challenges of mixed methods research and illustrate how they can be addressed in health psychology research. This study critically reflects on the author's previously published mixed methods research and discusses the philosophical and technical challenges of mixed methods, grounding the discussion in a brief review of methodological literature. Mixed methods research is characterized as having philosophical and technical challenges; the former can be addressed by drawing on pragmatism, the latter by considering formal mixed methods research designs proposed in a number of design typologies. There are important differences among the design typologies which provide diverse examples of designs that health psychologists can adapt for their own mixed methods research. There are also similarities; in particular, many typologies explicitly orient to the technical challenges of deciding on the respective timing of qualitative and quantitative methods and the relative emphasis placed on each method. Characteristics, strengths, and limitations of different sequential and concurrent designs are identified by reviewing five mixed methods projects each conducted for a different purpose. Adapting formal mixed methods designs can help health psychologists address the technical challenges of mixed methods research and identify the approach that best fits the research questions and purpose. This does not obfuscate the need to address philosophical challenges of mixing qualitative and quantitative methods. Statement of contribution What is already known on this subject? Mixed methods research poses philosophical and technical challenges. Pragmatism in a popular approach to the philosophical challenges while diverse typologies of mixed methods designs can help address the technical challenges. Examples of mixed methods research can be hard to locate when component studies from mixed methods projects are published separately. What does this study add? Critical

The Los Angeles County Community Disaster Resilience Project — A Community-Level, Public Health Initiative to Build Community Disaster Resilience

Directory of Open Access Journals (Sweden)

David Eisenman

2014-08-01

Full Text Available Public health officials need evidence-based methods for improving community disaster resilience and strategies for measuring results. This methods paper describes how one public health department is addressing this problem. This paper provides a detailed description of the theoretical rationale, intervention design and novel evaluation of the Los Angeles County Community Disaster Resilience Project (LACCDR, a public health program for increasing community disaster resilience. The LACCDR Project utilizes a pretest–posttest method with control group design. Sixteen communities in Los Angeles County were selected and randomly assigned to the experimental community resilience group or the comparison group. Community coalitions in the experimental group receive training from a public health nurse trained in community resilience in a toolkit developed for the project. The toolkit is grounded in theory and uses multiple components to address education, community engagement, community and individual self-sufficiency, and partnerships among community organizations and governmental agencies. The comparison communities receive training in traditional disaster preparedness topics of disaster supplies and emergency communication plans. Outcome indicators include longitudinal changes in inter-organizational linkages among community organizations, community member responses in table-top exercises, and changes in household level community resilience behaviors and attitudes. The LACCDR Project is a significant opportunity and effort to operationalize and meaningfully measure factors and strategies to increase community resilience. This paper is intended to provide public health and academic researchers with new tools to conduct their community resilience programs and evaluation research. Results are not yet available and will be presented in future reports.

Health Impact Assessment of an oil drilling project in California

Directory of Open Access Journals (Sweden)

Lindsay C. McCallum

2016-04-01

Full Text Available Objectives: The Health Impact Assessment (HIA was conducted to evaluate the potential community health implications of a proposed oil drilling and production project in Hermosa Beach, California. The HIA considered 17 determinants of health that fell under 6 major categories (i.e., air quality, water and soil quality, upset conditions, noise and light emissions, traffic, and community livability. Material and Methods: This paper attempts to address some of the gaps within the HIA practice by presenting the methodological approach and results of this transparent, comprehensive HIA; specifically, the evaluation matrix and decision-making framework that have been developed for this HIA and form the basis of the evaluation and allow for a clear conclusion to be reached in respect of any given health determinant (i.e., positive, negative, neutral. Results: There is a number of aspects of the project that may positively influence health (e.g., increased education funding, ability to enhance green space, and at the same time there have been potential negative effects identified (e.g., odor, blowouts, property values. Except for upset conditions, the negative health outcomes have been largely nuisance-related (e.g., odor, aesthetics without irreversible health impacts. The majority of the health determinants, that had been examined, have revealed that the project would have no substantial effect on the health of the community. Conclusions: Using the newly developed methodology and based on established mitigation measures and additional recommendations provided in the HIA, the authors have concluded that the project will have no substantial effect on community health. This approach and methodology will assist practitioners, stakeholders and decision-makers in advancing the HIA as a useful, reproducible, and informative tool.

Error begat error: design error analysis and prevention in social infrastructure projects.

Science.gov (United States)

Love, Peter E D; Lopez, Robert; Edwards, David J; Goh, Yang M

2012-09-01

Design errors contribute significantly to cost and schedule growth in social infrastructure projects and to engineering failures, which can result in accidents and loss of life. Despite considerable research that has addressed their error causation in construction projects they still remain prevalent. This paper identifies the underlying conditions that contribute to design errors in social infrastructure projects (e.g. hospitals, education, law and order type buildings). A systemic model of error causation is propagated and subsequently used to develop a learning framework for design error prevention. The research suggests that a multitude of strategies should be adopted in congruence to prevent design errors from occurring and so ensure that safety and project performance are ameliorated. Copyright © 2011. Published by Elsevier Ltd.

Design and implementation of a project-based active/cooperative engineering design course for freshmen

Science.gov (United States)

Abdulaal, R. M.; Al-Bahi, A. M.; Soliman, A. Y.; Iskanderani, F. I.

2011-08-01

A project-based active/cooperative design course is planned, implemented, assessed and evaluated to achieve several desired engineering outcomes. The course allows freshman-level students to gain professional hands-on engineering design experience through an opportunity to practise teamwork, quality principles, communication skills, life-long learning, realistic constraints and awareness of current domestic and global challenges. Throughout successive design reports and in-class assignments, the students are required by the end of the semester to communicate, clearly and concisely, the details of their design both orally and in writing through a functional artefact/prototype, a design notebook, an A0 project poster and a final oral presentation. In addition to these direct assessment tools, several indirect measures are used to ensure triangulation. Assignments are based on customer expectations using a detailed checklist. This paper shows the direct and indirect assessment tools that indicated a high level of achievement of course learning outcomes and a high level of student satisfaction.

Project margins of advanced reactor design WWER-500

International Nuclear Information System (INIS)

Rogov, M.F.; Birukov, G.I.; Ershov, V.G.; Volkov, B.E.

1994-01-01

Project criteria for design of advanced WWER-500 reactor within design conditions are compared to the requirements of the Russian regulatory guides. Normal operation limits, safe operation limits for main anticipated operational occurrences and design limits accepted for design basis accidents are considered as in preliminary safety report. It is shown that the basic design criteria in the design of WWER-500 for the anticipated operational occurrences and for design basis accidents are more severe than required in the following regulatory guides General Safety Regulations for Nuclear Power Plants and Nuclear Safety Rules for Reactors of Nuclear Power Plants. This provides certain margins from safety point of view

Volunteered Geographic Information System Design: Project and Participation Guidelines

Directory of Open Access Journals (Sweden)

José-Pablo Gómez-Barrón

2016-07-01

Full Text Available This article sets forth the early phases of a methodological proposal for designing and developing Volunteered Geographic Information (VGI initiatives based on a system perspective analysis in which the components depend and interact dynamically among each other. First, it focuses on those characteristics of VGI projects that present different goals and modes of organization, while using a crowdsourcing strategy to manage participants and contributions. Next, a tool is developed in order to design the central crowdsourced processing unit that is best suited for a specific project definition, associating it with a trend towards crowd-based or community-driven approaches. The design is structured around the characterization of different ways of participating, and the task cognitive demand of working on geo-information management, spatial problem solving and ideation, or knowledge acquisition. Then, the crowdsourcing process design helps to identify what kind of participants are needed and outline subsequent engagement strategies. This is based on an analysis of differences among volunteers’ participatory behaviors and the associated set of factors motivating them to contribute, whether on a crowd or community-sourced basis. From a VGI system perspective, this paper presents a set of guidelines and methodological steps in order to align project goals, processes and volunteers and thus successfully attract participation. This methodology helps establish the initial requirements for a VGI system, and, in its current state, it mainly focuses on two components of the system: project and participants.

Project Lifespan-based Nonstationary Hydrologic Design Methods for Changing Environment

Science.gov (United States)

Xiong, L.

2017-12-01

Under changing environment, we must associate design floods with the design life period of projects to ensure the hydrologic design is really relevant to the operation of the hydrologic projects, because the design value for a given exceedance probability over the project life period would be significantly different from that over other time periods of the same length due to the nonstationarity of probability distributions. Several hydrologic design methods that take the design life period of projects into account have been proposed in recent years, i.e. the expected number of exceedances (ENE), design life level (DLL), equivalent reliability (ER), and average design life level (ADLL). Among the four methods to be compared, both the ENE and ER methods are return period-based methods, while DLL and ADLL are risk/reliability- based methods which estimate design values for given probability values of risk or reliability. However, the four methods can be unified together under a general framework through a relationship transforming the so-called representative reliability (RRE) into the return period, i.e. m=1/1(1-RRE), in which we compute the return period m using the representative reliability RRE.The results of nonstationary design quantiles and associated confidence intervals calculated by ENE, ER and ADLL were very similar, since ENE or ER was a special case or had a similar expression form with respect to ADLL. In particular, the design quantiles calculated by ENE and ADLL were the same when return period was equal to the length of the design life. In addition, DLL can yield similar design values if the relationship between DLL and ER/ADLL return periods is considered. Furthermore, ENE, ER and ADLL had good adaptability to either an increasing or decreasing situation, yielding not too large or too small design quantiles. This is important for applications of nonstationary hydrologic design methods in actual practice because of the concern of choosing the emerging

The design explorer project: Using a cognitive framework to support knowledge exploration

DEFF Research Database (Denmark)

Pejtersen, A. M.; Sonnenwald, D.H.; Buur, J.

1997-01-01

the 'Design Explorer' research project whose goal is to specify requirements for an information system that will effectively help design team members from different domains and organizational cultures to locate and utilize diverse information sources and interact more effectively throughout the design process....... The project introduces a new approach to support of design; instead of design guidelines, support is given by creating a transparent information environment in which designers can navigate freely according to their individual preferences. The project is based on a framework that structures the dimensions......, and various related task spaces, domain activities, decisionmaking activities, division and coordination of work, and social organization. The framework is the result of a generalization of experiences from field studies in and design of support systems for a variety of modern work domains, such as process...

Eco-design pilot project in China - Monsoon offer 2 upgrade

Science.gov (United States)

Thai, Roselyne; Liu, Guoguo

2017-11-01

During COP21, Schneider Electric has committed that 100% of our new products would be eco-designed to tackle climate change. Launched in 2015, this initiative ecoDesign WayTM was tested on some pilot projects. This project covers the first ecoDesign WayTM pilot in China on an overvoltage or under voltage protective device used in both residential and industrial sectors, called Monsoon. Under the name ecoDesign WayTM, a method and a process have been deployed. The 3 main ecoDesign WayTM phases are: phase 1 - Marketing & Technique handshake, Phase 2 - ecoDesign WayTM follow-up and Phase 3 - Marketing communication. During the project, EIME from Bureau Veritas CODDE and ecoDesign WayTM scorecard from EVEA consulting are two core tools for eco-design implementation. They are respectively used for life cycle assessment and eco-design performance comparison. Thanks to the approach, compared to previous range, pollution emissions and resource depletion along the whole life cycle of product have decreased (reduction of 55% for energy depletion and 85% for water depletion). Global warming potential has dramatically decreased by 98.4% and air pollution by 33%. Meanwhile, the recycling rate has been improved by 18%, and recycled PA is used. The ecoDesign WayTM scorecard is stored as referent document for any customer request. Moreover, customers can access RoHS certificate, REACh declaration, PEP and EoLI in Check a product, an online environmental data repository, available 24/7.

Design Fixation and Cooperative Learning in Elementary Engineering Design Project: A Case Study

Science.gov (United States)

Luo, Yi

2015-01-01

This paper presents a case study examining 3rd, 4th and 5th graders' design fixation and cooperative learning in an engineering design project. A mixed methods instrument, the Cooperative Learning Observation Protocol (CLOP), was adapted to record frequency and class observation on cooperative learning engagement through detailed field notes.…

Design, Implementation, and Evaluation of the Adolescents and Surveillance System for the Obesity Prevention Project.

Science.gov (United States)

Tabacchi, Garden; Bianco, Antonino; Alessi, Nicola; Filippi, Anna Rita; Napoli, Giuseppe; Jemni, Monèm; Censi, Laura; Breda, João; Schumann, Nathali Lehmann; Firenze, Alberto; Vitale, Francesco; Mammina, Caterina

2016-03-01

The Adolescents Surveillance System for Obesity prevention (ASSO) Project aimed at developing standardized and web-based tools for collecting data on adolescents' obesity and its potential determinants. This has been implemented and piloted in the local area of Palermo city, Italy. The aim of the present study is to provide an overview of the Project's design, implementation, and evaluation, highlighting all the aspects for a potential scale-up of the surveillance system on the whole national territory and abroad, as a sustainable and effective source of data.The overall structure and management, the ASSO-toolkit, the ASSO-NutFit software, and all developed and used procedures for recruiting, training, and data collecting/analyzing are addressed. An interim evaluation has been performed through a feasibility study; a final Project evaluation has been performed reporting the Strengths, Weaknesses, Opportunities, and Threats (SWOT) and the attributes that a surveillance system should have.This article provides a detailed overview of the Project and highlights that ASSO can be considered a valid, logical, coherent, efficient, and sustainable surveillance system that is consistent with countries' needs and priorities.The system developed by the ASSO Project provides high-quality data and complies with several characteristics typical of a suitable surveillance system. It has a potential of being adopted within the National Health Service and other countries' Health Services for monitoring adolescents' obesity and its determinants, such as food intakes, behaviors, physical activity, and fitness profiles.

A desk evaluation review of project VIE/4/009 design and production of nuclear instruments. Project desk evaluation

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-09

A Project Desk Evaluation (PDE) is an intensive review process, using agreed guidelines, of the design, implementation, and the output of a project. This project is exclusively dealing with the design and production of nuclear instruments. The aim of this project would be to develop a viable capability for maintenance and repair of the nuclear instruments at the Dalat Research Institute (DNRI), the premier nuclear centre in Viet Nam, and also to meet the steadily increasing needs of DNRI, as well as of other national institutions, hospitals and universities engaged in the application of nuclear technologies, particularly in the southern part of the country. Project Summary with financial data is given along with training programme. 1 tab.

A desk evaluation review of project VIE/4/009 design and production of nuclear instruments. Project desk evaluation

International Nuclear Information System (INIS)

1994-01-01

A Project Desk Evaluation (PDE) is an intensive review process, using agreed guidelines, of the design, implementation, and the output of a project. This project is exclusively dealing with the design and production of nuclear instruments. The aim of this project would be to develop a viable capability for maintenance and repair of the nuclear instruments at the Dalat Research Institute (DNRI), the premier nuclear centre in Viet Nam, and also to meet the steadily increasing needs of DNRI, as well as of other national institutions, hospitals and universities engaged in the application of nuclear technologies, particularly in the southern part of the country. Project Summary with financial data is given along with training programme. 1 tab

A rural virtual health sciences library project: research findings with implications for next generation library services.

Science.gov (United States)

Richwine, M P; McGowan, J J

2001-01-01

The Shared Hospital Electronic Library of Southern Indiana (SHELSI) research project was designed to determine whether access to a virtual health sciences library and training in its use would support medical decision making in rural southern Indiana and achieve the same level of impact seen by targeted information services provided by health sciences librarians in urban hospitals. Based on the results of a needs assessment, a virtual medical library was created; various levels of training were provided. Virtual library users were asked to complete a Likert-type survey, which included questions on intent of use and impact of use. At the conclusion of the project period, structured interviews were conducted. Impact of the virtual health sciences library showed a strong correlation with the impact of information provided by health sciences librarians. Both interventions resulted in avoidance of adverse health events. Data collected from the structured interviews confirmed the perceived value of the virtual library. While librarians continue to hold a strong position in supporting information access for health care providers, their roles in the information age must begin to move away from providing information toward selecting and organizing knowledge resources and instruction in their use.

An exploration of the longer-term impacts of community participation in rural health services design.

Science.gov (United States)

Farmer, Jane; Currie, Margaret; Kenny, Amanda; Munoz, Sarah-Anne

2015-09-01

This article explores what happened, over the longer term, after a community participation exercise to design future rural service delivery models, and considers perceptions of why more follow-up actions did or did not happen. The study, which took place in 2014, revisits three Scottish communities that engaged in a community participation research method (2008-2010) intended to design rural health services. Interviews were conducted with 22 citizens, healthcare practitioners, managers and policymakers all of whom were involved in, or knew about, the original project. Only one direct sustained service change was found - introduction of a volunteer first responder scheme in one community. Sustained changes in knowledge were found. The Health Authority that part-funded development of the community participation method, through the original project, had not adopted the new method. Community members tended to attribute lack of further impact to low participation and methods insufficiently attuned to the social nuances of very small rural communities. Managers tended to blame insufficient embedding in the healthcare system and issues around power over service change and budgets. In the absence of convincing formal community governance mechanisms for health issues, rural health practitioners tended to act as conduits between citizens and the Health Authority. The study provides new knowledge about what happens after community participation and highlights a need for more exploration. Copyright © 2015 Elsevier Ltd. All rights reserved.

A biotic game design project for integrated life science and engineering education.

Science.gov (United States)

Cira, Nate J; Chung, Alice M; Denisin, Aleksandra K; Rensi, Stefano; Sanchez, Gabriel N; Quake, Stephen R; Riedel-Kruse, Ingmar H

2015-03-01

Engaging, hands-on design experiences are key for formal and informal Science, Technology, Engineering, and Mathematics (STEM) education. Robotic and video game design challenges have been particularly effective in stimulating student interest, but equivalent experiences for the life sciences are not as developed. Here we present the concept of a "biotic game design project" to motivate student learning at the interface of life sciences and device engineering (as part of a cornerstone bioengineering devices course). We provide all course material and also present efforts in adapting the project's complexity to serve other time frames, age groups, learning focuses, and budgets. Students self-reported that they found the biotic game project fun and motivating, resulting in increased effort. Hence this type of design project could generate excitement and educational impact similar to robotics and video games.

Health Impact Assessment of an oil drilling project in California.

Science.gov (United States)

McCallum, Lindsay C; Souweine, Kathleen; McDaniel, Mary; Koppe, Bart; McFarland, Christine; Butler, Katherine; Ollson, Christopher A

2016-01-01

The Health Impact Assessment (HIA) was conducted to evaluate the potential community health implications of a proposed oil drilling and production project in Hermosa Beach, California. The HIA considered 17 determinants of health that fell under 6 major categories (i.e., air quality, water and soil quality, upset conditions, noise and light emissions, traffic, and community livability). This paper attempts to address some of the gaps within the HIA practice by presenting the methodological approach and results of this transparent, comprehensive HIA; specifically, the evaluation matrix and decision-making framework that have been developed for this HIA and form the basis of the evaluation and allow for a clear conclusion to be reached in respect of any given health determinant (i.e., positive, negative, neutral). There is a number of aspects of the project that may positively influence health (e.g., increased education funding, ability to enhance green space), and at the same time there have been potential negative effects identified (e.g., odor, blowouts, property values). Except for upset conditions, the negative health outcomes have been largely nuisance-related (e.g., odor, aesthetics) without irreversible health impacts. The majority of the health determinants, that had been examined, have revealed that the project would have no substantial effect on the health of the community. Using the newly developed methodology and based on established mitigation measures and additional recommendations provided in the HIA, the authors have concluded that the project will have no substantial effect on community health. This approach and methodology will assist practitioners, stakeholders and decision-makers in advancing the HIA as a useful, reproducible, and informative tool. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Fuel Cell Car Design Project for Freshman Engineering Courses

Science.gov (United States)

Duke, Steve R.; Davis, Virginia A.

2014-01-01

In the Samuel Ginn College of Engineering at Auburn University, we have integrated a semester long design project based on a toy fuel cell car into our freshman "Introduction to Chemical Engineering Class." The project provides the students a basic foundation in chemical reactions, energy, and dimensional analysis that facilitates…

The JET Project (Design proposal)

International Nuclear Information System (INIS)

1976-01-01

This proposal describes a large Tokamak experiment, which aims to study plasma behavior in conditions and dimensions approaching those required in a fusion reactor. The maximum plasma minor radius (a) is 1.25 m and the major radius R 0 is 2.96 m. An important feature is the flexibility to study, for plasma currents in the 1→3 MA range, a wide range of aspect ratios R 0 /a=2.37→5), toroidal magnetic fields (up to 3.6T), minor radii (0.6→1.25 m) and elongation ratios (b/a=1→3.5). The cost of the apparatus, power supplies, plasma heating equipment and specific diagnostics is estimated as 70.1 Muc (March 1975 prices, 1 uc=50 FB). The total construction phase cost including commissioning, buildings and staff is 135 Muc. These figures include an average overall contingency of 30%. The construction time for the project is estimated at 5 years and requires 370 professional man years of effort in the construction organisation with additional effort deployed by the Associated Laboratories in such areas as diagnostics and plasma heating. This design proposal is arranged as follows: The preface gives an introduction to the field of fusion research and relates JET to the European and international programmes. Chapter I is a concise summary of the design proposal, it describes the objectives of research with JET, and gives a brief description of: the apparatus; the cost and construction schedules; the proposed experimental programme and the possible modes of operation of the device. A detailed account of the project is given in the rest of the report of which Chapters IV and VII comprise the engineering design and the staff and cost estimates respectively

A prospective evaluation of first people’s health promotion program design in the goulburn-murray rivers region

Directory of Open Access Journals (Sweden)

Joyce Doyle

2016-11-01

Full Text Available Abstract Background Aboriginal Community Controlled Organisations (ACCOs provide community-focussed and culturally safe services for First Peoples in Australia, including crisis intervention and health promotion activities, in a holistic manner. The ecological model of health promotion goes some way towards describing the complexity of such health programs. The aims of this project were to: 1 identify the aims and purpose of existing health promotion programs conducted by an alliance of ACCOs in northern Victoria, Australia; and 2 evaluate the extent to which these programs are consistent with an ecological model of health promotion, addressing both individual and environmental determinants of health. Methods The project arose from a long history of collaborative research. Three ACCOs and a university formed the Health Promotion Alliance to evaluate their health promotion programs. Local community members were trained in, and contributed to developing culturally sensitive methods for, data collection. Information on the aims and design of 88 health promotion activities making up 12 different programs across the ACCOs was systematically and prospectively collected. Results There was a wide range of activities addressing environmental and social determinants of health, as well as physical activity, nutrition and weight loss. The design of the great majority of activities had a minimal Western influence and were designed within a local Aboriginal cultural framework. The most common focus of the activities was social connectedness (76 %. Physical activity was represented in two thirds of the activities, and nutrition, weight loss and culture were each a focus of about half of the activities. A modified coding procedure designed to assess the ecological nature of these programs showed that they recruited from multiple settings; targeted a range of individual, social and environmental determinants; and used numerous and innovative strategies to

Designing the owner's nuclear project management organization

International Nuclear Information System (INIS)

Cooke, T.C.; Peck, B.H.

1976-01-01

Few decisions are more important to an electric utility company than the one to build a nuclear generating facility. This decision will require continuous management attention to the nuclear project for periods of up to ten years on the part of the utility. Effective management of such a large, complex project requires an owner's organization skilled in such areas as engineering, heavy construction, procurement, and project control. The paper describes a method for designing the owner's nuclear organization. Factors considered include the identification of milestone events and phases of the project and identification of key organizational groups and their degree of involvement. A series of important decision milestones is also identified for structuring the organization. A step-by-step analysis involving a set of evaluation criteria results in a recommended organization that can be staffed by the owner according to the degree of involvement desired. This technique of analysis could also be performed using different evaluation criteria resulting in other options for the owner's organization

[Transparency as a prerequisite of innovation in health services research: deficits in the reporting of model projects concerning managed care].

Science.gov (United States)

Wiethege, J; Ommen, O; Ernstmann, N; Pfaff, H

2010-10-01

Currently, elements of managed care are being implemented in the German health-care system. The legal basis for these innovations are § 140, § 73, § 137, and §§ 63 et seq. of the German Social Code - Part 5 (SGB V). For the model projects according to §§ 63 et seq. of the German Social Code a scientific evaluation and publication of the evaluation results is mandatory. The present study examines the status of evaluation of German model projects. The present study has a mixed method design: A mail and telephone survey with the German Federal Social Insurance Authority, the health insurance funds, and the regional Associations of Statutory Health Insurance Physicians has been conducted. Furthermore, an internet research on "Medpilot" and "Google" has been accomplished to search for model projects and their evaluation reports. 34 model projects met the inclusion criteria. 13 of these projects had been terminated up to 30/9/2008. 6 of them have published an evaluation report. 4 model projects have published substantial documents. One model project in progress has published a meaningful interim report. 12 model projects failed to give information concerning the evaluator or the duration of the model projects. The results show a significant deficit in the mandatory reporting of the evaluation of model projects in Germany. There is a need for action for the legislator and the health insurance funds in terms of promoting the evaluation and the publication of the results. The institutions evaluating the model projects should obligate themselves to publish the evaluation results. The publication is an essential precondition for the development of managed care structures in the health-care system and in the development of scientific evaluation methods. © Georg Thieme Verlag KG Stuttgart · New York.

Identification of Tools and Techniques to Enhance Interdisciplinary Collaboration During Design and Construction Projects.

Science.gov (United States)

Keys, Yolanda; Silverman, Susan R; Evans, Jennie

2017-10-01

The purpose of this study was to collect the perceptions of design professionals and clinicians regarding design process success strategies and elements of interprofessional engagement and communication during healthcare design and construction projects. Additional objectives were to gather best practices to maximize clinician engagement and provide tools and techniques to improve interdisciplinary collaboration for future projects. Strategies are needed to enhance the design and construction process and create interactions that benefit not only the project but the individuals working to see its completion. Meaningful interprofessional collaboration is essential to any healthcare design project and making sure the various players communicate is a critical element. This was a qualitative study conducted via an online survey. Respondents included architects, construction managers, interior designers, and healthcare personnel who had recently been involved in a building renovation or new construction project for a healthcare facility. Responses to open-ended questions were analyzed for themes, and descriptive statistics were used to provide insight into participant demographics. Information on the impressions, perceptions, and opportunities related to clinician involvement in design projects was collected from nurses, architects, interior designers, and construction managers. Qualitative analysis revealed themes of clinician input, organizational dynamics, and a variety of communication strategies to be the most frequently mentioned elements of successful interprofessional collaboration. This study validates the need to include clinician input in the design process, to consider the importance of organizational dynamics on design team functioning, and to incorporate effective communication strategies during design and construction projects.

Working with Climate Projections to Estimate Disease Burden: Perspectives from Public Health

Directory of Open Access Journals (Sweden)

Kathryn C. Conlon

2016-08-01

Full Text Available There is interest among agencies and public health practitioners in the United States (USA to estimate the future burden of climate-related health outcomes. Calculating disease burden projections can be especially daunting, given the complexities of climate modeling and the multiple pathways by which climate influences public health. Interdisciplinary coordination between public health practitioners and climate scientists is necessary for scientifically derived estimates. We describe a unique partnership of state and regional climate scientists and public health practitioners assembled by the Florida Building Resilience Against Climate Effects (BRACE program. We provide a background on climate modeling and projections that has been developed specifically for public health practitioners, describe methodologies for combining climate and health data to project disease burden, and demonstrate three examples of this process used in Florida.

Project W-420 Stack Monitoring system upgrades conceptual design report

International Nuclear Information System (INIS)

TUCK, J.A.

1998-01-01

This document describes the scope, justification, conceptual design, and performance of Project W-420 stack monitoring system upgrades on six NESHAP-designated, Hanford Tank Farms ventilation exhaust stacks

Project W-420 Stack Monitoring system upgrades conceptual design report

Energy Technology Data Exchange (ETDEWEB)

TUCK, J.A.

1998-11-06

This document describes the scope, justification, conceptual design, and performance of Project W-420 stack monitoring system upgrades on six NESHAP-designated, Hanford Tank Farms ventilation exhaust stacks.

A biotic game design project for integrated life science and engineering education.

Directory of Open Access Journals (Sweden)

Nate J Cira

2015-03-01

Full Text Available Engaging, hands-on design experiences are key for formal and informal Science, Technology, Engineering, and Mathematics (STEM education. Robotic and video game design challenges have been particularly effective in stimulating student interest, but equivalent experiences for the life sciences are not as developed. Here we present the concept of a "biotic game design project" to motivate student learning at the interface of life sciences and device engineering (as part of a cornerstone bioengineering devices course. We provide all course material and also present efforts in adapting the project's complexity to serve other time frames, age groups, learning focuses, and budgets. Students self-reported that they found the biotic game project fun and motivating, resulting in increased effort. Hence this type of design project could generate excitement and educational impact similar to robotics and video games.

Project Portal User-Centered Design and Engineering Report

Science.gov (United States)

2016-06-01

TECHNICAL REPORT 3013 June 2016 Project Portal User-Centered Design and Engineering Report Deborah Gill-Hesselgrave Veronica Higgins Sarah...Design and Engineering Branch Under authority of Chris Raney, Head Command and Control Technology and Experiments Division iii EXECUTIVE...navy.mil  Christian Szatkowski christian.szatkowski@navy.mil  Roni Higgins roni.higgins@navy.mil  Jake Viraldo jacob.viraldo@navy.mil B

The Comprehensive Health Education Workers Project and Caring Professionals as Asset-Builders

Science.gov (United States)

Lévesque, Michel

2017-01-01

The Comprehensive Health Education Workers (CHEW) Project is a community-based initiative that educates sexual and gender minority (SGM or LGBTQ) young people about comprehensive--mental, physical, sexual, and social--health and that supports their comprehensive health needs with other services. Since October 2014, CHEW Project staff have served…

State partnership in environmental health and safety phase of Plowshare projects

Energy Technology Data Exchange (ETDEWEB)

Kinsman, S [California State Department of Public Health, Berkeley, CA (United States)

1969-07-01

When experiments on projects involving Plowshare devices are conceived, the state chosen for the project should be invited to participate in planning the health and safety aspects and be prepared to actively participate in the D-Day phase as well as the post-detonation activity. In California nuclear science technology and competence have preceded the social acceptance and use of nuclear devices for large scale Plowshare projects. However, the environmental surveillance program of the Bureau of Radiological Health in the State Department of Public Health has established an operative program which will be ready and able to function as an active participant or in a support role in environmental health phases of nuclear projects scheduled in the State. A description of our present program will be included in this paper. This will enable the attendees and readers to realize capabilities which will be activated for participation and/or support roles during Plowshare activities in the State or in a neighboring state if the need arises. (author)

State partnership in environmental health and safety phase of Plowshare projects

International Nuclear Information System (INIS)

Kinsman, S.

1969-01-01

When experiments on projects involving Plowshare devices are conceived, the state chosen for the project should be invited to participate in planning the health and safety aspects and be prepared to actively participate in the D-Day phase as well as the post-detonation activity. In California nuclear science technology and competence have preceded the social acceptance and use of nuclear devices for large scale Plowshare projects. However, the environmental surveillance program of the Bureau of Radiological Health in the State Department of Public Health has established an operative program which will be ready and able to function as an active participant or in a support role in environmental health phases of nuclear projects scheduled in the State. A description of our present program will be included in this paper. This will enable the attendees and readers to realize capabilities which will be activated for participation and/or support roles during Plowshare activities in the State or in a neighboring state if the need arises. (author)

[Effects of community health promotion project for garlic cultivating farmers based on self-efficacy theory and community capacity building framework].

Science.gov (United States)

Kim, Hyang-Sook; Gu, Mee Ock

2011-02-01

This study was conducted to test the effects of a community health promotion project for farmers cultivating garlic. Bandura's self-efficacy theory (1986) and Chaskin's community capacity framework (2001) were used as the theoretical framework. A nonequivalent control group pretest-posttest design was used. Study participants were 72 garlic farmers (intervention: 36, control: 36). The community health promotion project consisted of health promotion program and community capacity building strategies and was provided for 12 weeks (8 during farming off-season and 4 during farming season). Data were collected between February 23 and May 31, 2009 and were analyzed using chi-square test, Fisher's exact test, t-test, and repeated measure ANOVA using SPSS/WIN 12.0. For the experimental group, significant improvement was found for self-efficacy, farming related health behavior, physical fitness (muscle strength, muscle endurance, upper body flexibility, lower body flexibility, cardiovascular endurance, balance, agility), farmer's syndrome, and health related quality of life as compared to the control group. The findings of the study indicate that the community health promotion project for garlic farmers is effective and can be recommended as a nursing intervention for health promotion of garlic cultivating farmers.

Family health nurse project--an education program of the World Health Organization: the University of Stirling experience.

Science.gov (United States)

Murray, Ian

2008-11-01

This article outlines the delivery of the Family Health Nurse Education Programme of the World Health Organization (WHO) at the University of Stirling, Scotland, from 2001 to 2005. The program was part of the WHO European Family Health Nurse pilot project. The curriculum outlined by the WHO Curriculum Planning Group detailed the broad thrust of the Family Health Nurse Education Programme and was modified to be responsive to the context in which it was delivered, while staying faithful to general principles and precepts. The Family Health Nurse Education Programme is described in its evolving format over the two phases of the project; the remote and rural context occurred from 2001 to 2003, and the modification of the program for the urban phase of the project occurred during 2004 and 2005. The conceptual framework that was foundational to the development of the curriculum to prepare family health nurses will be described.

Faculty development projects for international health professions educators: Vehicles for institutional change?

Science.gov (United States)

Burdick, William P; Friedman, Stacey R; Diserens, Deborah

2012-01-01

Projects are an important tool in faculty development, and project emphasis may offer insights into perceived education priorities. Impact of projects has been focused on individuals, not institutions or health. Education innovation projects of Fellows in an international faculty development program were examined to better understand perceived needs in health professions education and institutional impact of projects. Four hundred and thirty-five projects were analyzed to identify focus areas. Fellows were asked to identify changes in their schools and communities resulting from their projects. New education methods and curriculum change were common project focus areas. Regional differences were evident with a higher percentage of education methods projects by Fellows residing in India (52%), compared with South Africa (25%) and Brazil (24%). Fifty-six percent of projects were incorporated into the curriculum and/or incorporated as institutional policy. One-third to two-thirds of respondents noted improved teaching quality, collaboration, education research interest, assessment, student performance, and curriculum alignment with community health needs. National differences in project focus may offer insight into local conditions and needs. High rates of diffusion of projects and impact on faculty, students, and curriculum suggest that faculty development projects may be a strategy for institutional change in resource limited environments.

Working towards Men's Health: Findings from the Sefton Men's Health Project

Science.gov (United States)

Robinson, Mark; Robertson, Steve; McCullagh, Jo; Hacking, Sue

2010-01-01

Objective: To evaluate a health improvement initiative aimed at enhancing the health of men in deprived areas. Design: A healthy lifestyle programme was undertaken with men to increase their health knowledge, and encourage behaviour modification and access to health improvement services. A peer mentoring programme was implemented and a training…

Project monitoring and evaluation: an enhancing method for health research system management.

Science.gov (United States)

Djalalinia, Shirin; Owlia, Parviz; Malekafzali, Hossein; Ghanei, Mostafa; Babamahmoodi, Abdolreza; Peykari, Niloofar

2014-04-01

Planning, organizing, staffing, leading and monitoring are the basic functional component of management. In present article, we aim to define the project monitoring and evaluation in health research system (HRS) considering its success and challenges based on our national experience. IN THIS STUDY BASED ON THE INFORMATION OF ANNUAL MEDICAL SCIENCE UNIVERSITIES EVALUATION DURING THE LAST DECADE THE HRS INDICATORS HAVE BEEN SCORED IN THREE AXES BASED ON HRS FUNCTIONS: Stewardship, capacity building and knowledge production. In this article, we will focus on the results of HRS evaluation from 2002 to 2010, also on its success and challenges. In an overall view, the main results are the experiences of the designing and implantation of such process after pre-project preparation, all parts followed under the whole supervision of the aims of the HRS evaluation. Project management light the way of practical application of knowledge, skills, tools and techniques for better HRS evaluation and management. We concluded that; although monitoring and evaluation as an essential part of HRS Management light the improvement ahead way but we still need to advantage of the new project management advances.

Using design science in educational technology research projects

Directory of Open Access Journals (Sweden)

Susan M. Chard

2017-12-01

Full Text Available Design science is a research paradigm where the development and evaluation of a technology artefact is a key contribution. Design science is used in many domains and this paper draws on those domains to formulate a generic structure for design science research suitable for educational technology research projects. The paper includes guidelines for writing proposals using the design science research methodology for educational technology research and presents a generic research report structure. The paper presents ethical issues to consider in design science research being conducted in educational settings and contributes guidelines for assessment when the research contribution involves the creation of a technology artefact.

Estimating NOA Health Risks from Selected Construction Activities at the Calaveras Dam Replacement Project (CDRP)

Science.gov (United States)

Hernandez, D. W.

2012-12-01

The CDRP is a major construction project involving up to 400 workers using heavy earth moving equipment, blasting, drilling, rock crushing, and other techniques designed to move 7 million yards of earth. Much of this material is composed of serpentinite, blueschist, and other rocks that contain chrysotile, crocidolite, actinolite, tremolite, and Libby-class amphiboles. To date, over 1,000 personal, work area, and emission inventory related samples have been collected and analyzed by NIOSH 7400, NIOSH 7402, and CARB-AHERA methodology. Data indicate that various CDRP construction activities have the potential to generate significant mineral fibers and structures that could represent elevated on site and off site health risks. This presentation will review the Contractors air monitoring program for this major project, followed by a discussion of predictive methods to evaluate potential onsite and offsite risks. Ultimately, the data are used for planning control strategies designed to achieve a Project Action Level of 0.01 f/cc (one tenth the Cal/OSHA PEL) and risk-based offsite target levels.

Developing longitudinal qualitative designs: lessons learned and recommendations for health services research.

Science.gov (United States)

Calman, Lynn; Brunton, Lisa; Molassiotis, Alex

2013-02-06

Longitudinal qualitative methods are becoming increasingly used in the health service research, but the method and challenges particular to health care settings are not well described in the literature.We reflect on the strategies used in a longitudinal qualitative study to explore the experience of symptoms in cancer patients and their carers, following participants from diagnosis for twelve months; we highlight ethical, practical, theoretical and methodological issues that need to be considered and addressed from the outset of a longitudinal qualitative study. Key considerations in undertaking longitudinal qualitative projects in health research, include the use of theory, utilizing multiple methods of analysis and giving consideration to the practical and ethical issues at an early stage. These can include issues of time and timing; data collection processes; changing the topic guide over time; recruitment considerations; retention of staff; issues around confidentiality; effects of project on staff and patients, and analyzing data within and across time. As longitudinal qualitative methods are becoming increasingly used in health services research, the methodological and practical challenges particular to health care settings need more robust approaches and conceptual improvement. We provide recommendations for the use of such designs. We have a particular focus on cancer patients, so this paper will have particular relevance for researchers interested in chronic and life limiting conditions.

Spacecraft design project: Low Earth orbit communications satellite

Science.gov (United States)

Moroney, Dave; Lashbrook, Dave; Mckibben, Barry; Gardener, Nigel; Rivers, Thane; Nottingham, Greg; Golden, Bill; Barfield, Bill; Bruening, Joe; Wood, Dave

1991-01-01

This is the final product of the spacecraft design project completed to fulfill the academic requirements of the Spacecraft Design and Integration 2 course (AE-4871) taught at the U.S. Naval Postgraduate School. The Spacecraft Design and Integration 2 course is intended to provide students detailed design experience in selection and design of both satellite system and subsystem components, and their location and integration into a final spacecraft configuration. The design team pursued a design to support a Low Earth Orbiting (LEO) communications system (GLOBALSTAR) currently under development by the Loral Cellular Systems Corporation. Each of the 14 team members was assigned both primary and secondary duties in program management or system design. Hardware selection, spacecraft component design, analysis, and integration were accomplished within the constraints imposed by the 11 week academic schedule and the available design facilities.

Projection models for health effects assessment in populations exposed to radioactive and nonradioactive pollutants. Volume IV. SPAHR user's guide

International Nuclear Information System (INIS)

Collins, J.J.; Lundy, R.T.

1982-09-01

The Simulation Package for the Analysis of Health Risk (SPAHR) is a computer software package based upon a demographic model for health risk projections. The model extends several health risk projection models by making realistic assumptions about the population at risk, and thus represents a distinct improvement over previous models. Complete documentation for use of SPAHR is contained in this five-volume publication. The demographic model in SPAHR estimates population response to environmental toxic exposures. Latency of response, changing dose level over time, competing risks from other causes of death, and population structure can be incorporated into SPAHR to project health risks. Risks are measured by morbid years, number of deaths, and loss of life expectancy. Comparisons of estimates of excess deaths demonstrate that previous health risk projection models may have underestimated excess deaths by a factor of from 2 to 10, depending on the pollutant and the exposure scenario. The software supporting the use of the demographic model is designed to be user oriented. Complex risk projections are made by responding to a series of prompts generated by the package. The flexibility and ease of use of SPAHR make it an important contribution to existing models and software packages. This volume gives the more advanced user of the SPAHR computer package the information required to create tailor-made programs for addressing specific issues not covered by the three interactive packages. It assumes that the user is familiar with the concepts and terms relating to demography and health risk assessment

Pedagogical design for knowledge creating inquiry in customer projects

Directory of Open Access Journals (Sweden)

Hanni Muukkonen

2013-09-01

Full Text Available Two higher education courses involving students, teachers, and customers in multifaceted experiences of knowledge creation are described. The Trialogical Learning Approach (TLA provides a theoretical framework to address learning and teaching organized around authentic problems and the development of shared knowledge objects, such as reports, products, and new practices. The approach directs attention to those aspects of social interaction and artifact-mediated activities, which focus on the development of shared objects and the pursuit of novel knowledge and understanding. The roles of technology-mediation, customer involvement, and guidance in developing effective pedagogical practices for knowledge creation were addressed. It appears necessary to design sufficient open-endedness and complexity for students’ teamwork to generate unpredictable, practical, and epistemologically challenging situations. Pedagogical design for such a process has different foci in the four central phases: planning, project initiation, project execution, and presentation and evaluation. Planning and initiation are central to establishing relevance and project awareness for the collaboration of student teams with a customer. Guidance and expert modeling during project initiation and execution is needed to overcome feelings of uncertainty during a challenging and complex assignment. Mediation provided by collaboration tools facilitates reflection on collective practices, iterative development of knowledge objects, and documentation of the learning outcomes of customer projects.

A New Project-Based Curriculum of Design Thinking with Systems Engineering Techniques

NARCIS (Netherlands)

Haruyama, S.; Kim, S.K.; Beiter, K.A.; Dijkema, G.P.J.; De Weck, O.L.

2012-01-01

We developed a new education curriculum called "ALPS" (Active Learning Project Sequence) at Keio University that emphasizes team project-based learning and design thinking with systems engineering techniques. ALPS is a 6 month course, in which students work as a team and design and propose

Digital patient: Personalized and translational data management through the MyHealthAvatar EU project.

Science.gov (United States)

Kondylakis, Haridimos; Spanakis, Emmanouil G; Sfakianakis, Stelios; Sakkalis, Vangelis; Tsiknakis, Manolis; Marias, Kostas; Xia Zhao; Hong Qing Yu; Feng Dong

2015-08-01

The advancements in healthcare practice have brought to the fore the need for flexible access to health-related information and created an ever-growing demand for the design and the development of data management infrastructures for translational and personalized medicine. In this paper, we present the data management solution implemented for the MyHealthAvatar EU research project, a project that attempts to create a digital representation of a patient's health status. The platform is capable of aggregating several knowledge sources relevant for the provision of individualized personal services. To this end, state of the art technologies are exploited, such as ontologies to model all available information, semantic integration to enable data and query translation and a variety of linking services to allow connecting to external sources. All original information is stored in a NoSQL database for reasons of efficiency and fault tolerance. Then it is semantically uplifted through a semantic warehouse which enables efficient access to it. All different technologies are combined to create a novel web-based platform allowing seamless user interaction through APIs that support personalized, granular and secure access to the relevant information.

Final Design Report for the RH LLW Disposal Facility (RDF) Project, Revision 3

International Nuclear Information System (INIS)

Austad, Stephanie Lee

2015-01-01

The RH LLW Disposal Facility (RDF) Project was designed by AREVA Federal Services (AFS) and the design process was managed by Battelle Energy Alliance (BEA) for the Department of Energy (DOE). The final design report for the RH LLW Disposal Facility Project is a compilation of the documents and deliverables included in the facility final design.

Adapted User-Centered Design: A Strategy for the Higher User Acceptance of Innovative e-Health Services

Directory of Open Access Journals (Sweden)

Dejan Dinevski

2012-08-01

Full Text Available Being familiar with all the benefits of e-Health and the strategic plan for the Slovenian health sector’s informatization, Telekom Slovenia and the Faculty of Medicine from the University of Maribor, along with other partners, have initiated an e-Health project. The project group is developing various e-Health services that are based on modern ICT (information and communications technology solutions and will be available on several screens. In order to meet the users’ needs and expectations and, consequently, achieve the high acceptance of e-Health services, the user-centered design (UCD approach was employed in the e-Health project. However, during the research it was found that conventional UCD methods are not completely appropriate for older adults: the target population of the e-Health services. That is why the selected UCD methods were modified and adapted for older adults. The modified UCD methods used in the research study are presented in this paper. Using the results of the adapted UCD methods, a prototype for a service named MedReminder was developed. The prototype was evaluated by a group of 12 study participants. The study participants evaluated the MedReminder service as acceptable with a good potential for a high adoption rate among its target population, i.e., older adults.

Optical design of ultrashort throw liquid crystal on silicon projection system

Science.gov (United States)

Huang, Jiun-Woei

2017-05-01

An ultrashort throw liquid crystal on silicon (LCoS) projector for home cinema, virtual reality, and automobile heads-up display has been designed and fabricated. To achieve the best performance and highest-quality image, this study aimed to design wide-angle projection optics and optimize the illumination for LCoS. Based on the telecentric lens projection system and optimized Koehler illumination, the optical parameters were calculated. The projector's optical system consisted of a conic aspheric mirror and image optics using either symmetric double Gauss or a large-angle eyepiece to achieve a full projection angle larger than 155 deg. By applying Koehler illumination, image resolution was enhanced and the modulation transfer function of the image in high spatial frequency was increased to form a high-quality illuminated image. The partial coherence analysis verified that the design was capable of 2.5 lps/mm within a 2 m×1.5 m projected image. The throw ratio was less than 0.25 in HD format.

Healthy Gaming - Video Game Design to promote Health.

Science.gov (United States)

Brox, E; Fernandez-Luque, L; Tøllefsen, T

2011-01-01

There is an increasing interest in health games including simulation tools, games for specific conditions, persuasive games to promote a healthy life style or exergames where physical exercise is used to control the game. The objective of the article is to review current literature about available health games and the impact related to game design principles as well as some educational theory aspects. Literature from the big databases and known sites with games for health has been searched to find articles about games for health purposes. The focus has been on educational games, persuasive games and exergames as well as articles describing game design principles. The medical objectives can either be a part of the game theme (intrinsic) or be totally dispatched (extrinsic), and particularly persuasive games seem to use extrinsic game design. Peer support is important, but there is only limited research on multiplayer health games. Evaluation of health games can be both medical and technical, and the focus will depend on the game purpose. There is still not enough evidence to conclude which design principles work for what purposes since most of the literature in health serious games does not specify design methodologies, but it seems that extrinsic methods work in persuasion. However, when designing health care games it is important to define both the target group and main objective, and then design a game accordingly using sound game design principles, but also utilizing design elements to enhance learning and persuasion. A collaboration with health professionals from an early design stage is necessary both to ensure that the content is valid and to have the game validated from a clinical viewpoint. Patients need to be involved, especially to improve usability. More research should be done on social aspects in health games, both related to learning and persuasion.

Health physics in fusion reactor design

International Nuclear Information System (INIS)

Wong, K.Y.; Dinner, P.J.

1984-06-01

Experience in the control of tritium exposures to workers and the public gained through the design and operation of Ontario Hydro's nuclear stations has been applied to fusion projects and to design studies on emerging fusion reactor concepts. Ontario Hydro performance in occupational tritium exposure control and environmental impact is reviewed. Application of tritium control technologies and dose management methodology during facility design is highlighted

[Logic model of the Franche-Comté Regional Health Project: advantages and limitations for the evaluation process].

Science.gov (United States)

Michaud, Claude; Sannino, Nadine; Duboudin, Cédric; Baudier, François; Guillin, Caroline; Billondeau, Christine; Mansion, Sylvie

2014-01-01

The French "Hospitals, patients, health and territories" law of July 2009 created the Regional Health Project (PRS) to support regional health policy, and requires evaluation of these projects. The construction of these projects, which includes prevention planning, care planning, and medical and social welfare planning, presents an unprecedented complexity in France, where evaluation programmes are still in their infancy. To support future evaluations, the Franche-Comté Regional Health Agency (ARS FC), assisted by the expertise of EFECT Consultants, decided to reconstruct the PRS logic model. This article analyzes the advantages and limitations of this approach. The resulting logic model allows visualization of the strategy adopted to achieve the Franche-Comté PRS ambitions and expected results. The model highlights four main aspects of structural change to the health system, often poorly visible in PRS presentation documents. This model also establishes links with the usual public policy evaluation issues and facilitates their prioritization. This approach also provides a better understanding of the importance of analysis of the programme construction in order to be effective rather than direct analysis of the effects, which constitutes the natural tendency of current practice. The main controversial limit concerns the retrospective design of the PRS framework, both in terms of the reliability of interpretation and adoption by actors not directly involved in this initiative.

User-inspired design methodology using Affordance Structure Matrix (ASM for construction projects

Directory of Open Access Journals (Sweden)

Maheswari J. Uma

2017-01-01

Full Text Available Traditionally, design phase of construction projects is often performed with incomplete and inaccurate user preferences. This is due to inefficiencies in the methodologies used for capturing the user requirements that can subsequently lead to inconsistencies and result in non-optimised end-result. Iterations and subsequent reworks due to such design inefficiencies is one of the major reasons for unsuccessful project delivery as they impact project performance measures such as time and cost among others. The existing design theories and practice are primarily based on functional requirements. Function-based design deals with design of artifact alone, which may yield favourable or unfavourable consequences with the design artifact. However, incorporating other interactions such as interactions between user & designer is necessary for optimised end-result. Hence, the objective of this research work is to devise a systematic design methodology considering all the three interactions among users, designers and artefacts for improved design efficiency. In this study, it has been attempted to apply the theory of affordances in a case project that involves the design of an offshore facility. A step-by-step methodology for developing Affordance Structure Matrix (ASM, which integrates House of Quality (HOQ and Design Structure Matrix (DSM, is proposed that can effectively capture the user requirements. HOQ is a popular quality management tool for capturing client requirements and DSM is a matrix-based tool that can capture the interdependency among the design entities. The proposed methodology utilises the strengths of both the tools, as DSM compliments HOQ in the process. In this methodology, different affordances such as AUA (Artifact-User-Affordance, AAA (Artifact-Artifact-Affordance and DDA (Designer-Designer-Affordance are captured systematically. Affordance is considered to be user-driven in this context that is in contrast to prevailing design

Mentorship and coaching to support strengthening healthcare systems: lessons learned across the five Population Health Implementation and Training partnership projects in sub-Saharan Africa.

Science.gov (United States)

Manzi, Anatole; Hirschhorn, Lisa R; Sherr, Kenneth; Chirwa, Cindy; Baynes, Colin; Awoonor-Williams, John Koku

2017-12-21

Despite global efforts to increase health workforce capacity through training and guidelines, challenges remain in bridging the gap between knowledge and quality clinical practice and addressing health system deficiencies preventing health workers from providing high quality care. In many developing countries, supervision activities focus on data collection, auditing and report completion rather than catalyzing learning and supporting system quality improvement. To address this gap, mentorship and coaching interventions were implemented in projects in five African countries (Ghana, Mozambique, Rwanda, Tanzania, and Zambia) as components of health systems strengthening (HSS) strategies funded through the Doris Duke Charitable Foundation's African Health Initiative. We report on lessons learned from a cross-country evaluation. The evaluation was designed based on a conceptual model derived from the project-specific interventions. Semi-structured interviews were administered to key informants to capture data in six categories: 1) mentorship and coaching goals, 2) selection and training of mentors and coaches, 3) integration with the existing systems, 4) monitoring and evaluation, 5) reported outcomes, and 6) challenges and successes. A review of project-published articles and technical reports from the individual projects supplemented interview information. Although there was heterogeneity in the approaches to mentorship and coaching and targeted areas of the country projects, all led to improvements in core health system areas, including quality of clinical care, data-driven decision making, leadership and accountability, and staff satisfaction. Adaptation of approaches to reflect local context encouraged their adoption and improved their effectiveness and sustainability. We found that incorporating mentorship and coaching activities into HSS strategies was associated with improvements in quality of care and health systems, and mentorship and coaching represents an

Design Factors Influencing Quality of Building Projects in Nigeria: Consultants' Perception

Directory of Open Access Journals (Sweden)

Lukumon Oyedele

2012-11-01

Full Text Available Various factors identified from the literature that caninfluence quality of building projects in Nigeria have beenstudied by means of questionnaire survey sent to architects,engineers and quantity surveyors in the industry. From atotal response of 107 consultants, the importance of eachfactor was obtained via severity and frequency responsesof the factors. Data analysis includes comparisons ofranking among consultants using severity, frequency andimportance indexes, correlation analysis, and percentagerank agreement factor (PRAF to measure the agreement inthe importance ranking among the consultants.Correlation results between the professionals are architects/quantity surveyors (0.75, architects/engineers (0.21 ,and engineers/quantity surveyors (0.24. The percentagerank agreement factor (PRAF shows that the five mostimportant factors affecting quality are 'design changes'(78.9%; 'inadequate involvement of other professionalsduring the design stage' (78.9%; 'insufficient andunrealistic constraints of project cost' (71.1 %; 'poor levelof commitment to quality improvement among designprofessionals' (63.2%; and 'making design decisions oncost and not value of work' (55.3%. The results of this studywould provide feedback for the clients, project and qualitymangers and all the consultants in the industry, so thateffective management of quality can be ensured from theconceptual-design stage of the project.

Survival of the project: a case study of ICT innovation in health care.

Science.gov (United States)

Andreassen, Hege K; Kjekshus, Lars Erik; Tjora, Aksel

2015-05-01

From twenty years of information and communication technology (ICT) projects in the health sector, we have learned one thing: most projects remain projects. The problem of pilotism in e-health and telemedicine is a growing concern, both in medical literature and among policy makers, who now ask for large-scale implementation of ICT in routine health service delivery. In this article, we turn the question of failing projects upside down. Instead of investigating the obstacles to implementing ICT and realising permanent changes in health care routines, we ask what makes the temporary ICT project survive, despite an apparent lack of success. Our empirical material is based on Norwegian telemedicine. Through a case study, we take an in-depth look into the history of one particular telemedical initiative and highlight how ICT projects matter on a managerial level. Our analysis reveals how management tasks were delegated to the ICT project, which thus contributed to four processes of organisational control: allocating resources, generating and managing enthusiasm, system correction and aligning local practice and national policies. We argue that the innovation project in itself can be considered an innovation that has become normalised in health care, not in clinical, but in management work. In everyday management, the ICT project appears to be a convenient tool suited to ease the tensions between state regulatory practices and claims of professional autonomy that arise in the wake of new public management reforms. Separating project management and funding from routine practice handles the conceptualised heterogeneity between innovation and routine within contemporary health care delivery. Whilst this separation eases the execution of both normal routines and innovative projects, it also delays expected diffusion of technology. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Health and Sport Engagement (HASE) Intervention and Evaluation Project: protocol for the design, outcome, process and economic evaluation of a complex community sport intervention to increase levels of physical activity.

Science.gov (United States)

Mansfield, Louise; Anokye, Nana; Fox-Rushby, Julia; Kay, Tess

2015-10-26

Sport is being promoted to raise population levels of physical activity for health. National sport participation policy focuses on complex community provision tailored to diverse local users. Few quality research studies exist that examine the role of community sport interventions in raising physical activity levels and no research to date has examined the costs and cost-effectiveness of such provision. This study is a protocol for the design, outcome, process and economic evaluation of a complex community sport intervention to increase levels of physical activity, the Health and Sport Engagement (HASE) project part of the national Get Healthy Get Active programme led by Sport England. The HASE study is a collaborative partnership between local community sport deliverers and sport and public health researchers. It involves designing, delivering and evaluating community sport interventions. The aim is to engage previously inactive people in sustained sporting activity for 1×30 min a week and to examine associated health and well-being outcomes. The study uses mixed methods. Outcomes (physical activity, health, well-being costs to individuals) will be measured by a series of self-report questionnaires and attendance data and evaluated using interrupted time series analysis controlling for a range of sociodemographic factors. Resource use will be identified and measured using diaries, interviews and records and presented alongside effectiveness data as incremental cost-effectiveness ratios and cost-effectiveness acceptability curves. A longitudinal process evaluation (focus groups, structured observations, in-depth interview methods) will examine the efficacy of the project for achieving its aim using the principles of thematic analysis. The results of this study will be disseminated through peer-reviewed publications, academic conference presentations, Sport England and national public health organisation policy conferences, and practice-based case studies

Integration of evidence-based and experience-based design: contributions from a study in a health care service

Directory of Open Access Journals (Sweden)

Mirela S. da Rosa

2015-06-01

Full Text Available The purpose this paper is to present an integrated study of Service Design and the Mechanism of the Production Function (MPF for redesigning the health care services to improve the perceived value of the patient and increase the productivity of hospital operations by eliminating wastes. The method used was action research and applied in an ICU of a private hospital in southern Brazil. The techniques of participant observation, interviews, archival research and meetings co-creation with a team of the hospital were used to collect data. Data were analyzed through content analysis of the interviews and the Design Service and Production Engineering tools. Evidence based approaches tends to contribute to the replication of the project outcomes in future cases. The MPF can support project development in the field of Design, as well the integrated approach developed in the healthcare sector, helped to devote more time to the phases of diagnosis and implementation. The findings are useful to demonstrate that can use simultaneously approaches the Service Design and MPF for the development of more robust solutions in health care environment. Further research could be done in other private or public hospitals as well as in other hospital units besides the ICUs. Limitations include the work done in a single hospital and service unit, data collected from a small group of people in the hospital. Integrating Evidence-Based Design, Experience-Based Design and the MPF can produce a more robust way to justify and define the focus of improvements in health care services.

A rural virtual health sciences library project: research findings with implications for next generation library services*

Science.gov (United States)

Richwine, Margaret (Peggy); McGowan, Julie J.

2001-01-01

Purpose: The Shared Hospital Electronic Library of Southern Indiana (SHELSI) research project was designed to determine whether access to a virtual health sciences library and training in its use would support medical decision making in rural southern Indiana and achieve the same level of impact seen by targeted information services provided by health sciences librarians in urban hospitals. Methods: Based on the results of a needs assessment, a virtual medical library was created; various levels of training were provided. Virtual library users were asked to complete a Likert-type survey, which included questions on intent of use and impact of use. At the conclusion of the project period, structured interviews were conducted. Results: Impact of the virtual health sciences library showed a strong correlation with the impact of information provided by health sciences librarians. Both interventions resulted in avoidance of adverse health events. Data collected from the structured interviews confirmed the perceived value of the virtual library. Conclusion: While librarians continue to hold a strong position in supporting information access for health care providers, their roles in the information age must begin to move away from providing information toward selecting and organizing knowledge resources and instruction in their use. PMID:11209799

User-inspired design methodology using Affordance Structure Matrix (ASM) for construction projects

OpenAIRE

Maheswari J. Uma; Charlesraj V. Paul C.; Battacharya Soma

2017-01-01

Traditionally, design phase of construction projects is often performed with incomplete and inaccurate user preferences. This is due to inefficiencies in the methodologies used for capturing the user requirements that can subsequently lead to inconsistencies and result in non-optimised end-result. Iterations and subsequent reworks due to such design inefficiencies is one of the major reasons for unsuccessful project delivery as they impact project performance measures such as time and cost am...

USL/DBMS NASA/PC R and D project system design standards

Science.gov (United States)

Dominick, Wayne D. (Editor); Moreau, Dennis R.

1984-01-01

A set of system design standards intended to assure the completeness and quality of designs developed for PC research and development projects is established. The standards presented address the areas of problem definition, initial design plan, design specification, and re-evaluation.

Design principles for data- and change-oriented organisational analysis in workplace health promotion.

Science.gov (United States)

Inauen, A; Jenny, G J; Bauer, G F

2012-06-01

This article focuses on organizational analysis in workplace health promotion (WHP) projects. It shows how this analysis can be designed such that it provides rational data relevant to the further context-specific and goal-oriented planning of WHP and equally supports individual and organizational change processes implied by WHP. Design principles for organizational analysis were developed on the basis of a narrative review of the guiding principles of WHP interventions and organizational change as well as the scientific principles of data collection. Further, the practical experience of WHP consultants who routinely conduct organizational analysis was considered. This resulted in a framework with data-oriented and change-oriented design principles, addressing the following elements of organizational analysis in WHP: planning the overall procedure, data content, data-collection methods and information processing. Overall, the data-oriented design principles aim to produce valid, reliable and representative data, whereas the change-oriented design principles aim to promote motivation, coherence and a capacity for self-analysis. We expect that the simultaneous consideration of data- and change-oriented design principles for organizational analysis will strongly support the WHP process. We finally illustrate the applicability of the design principles to health promotion within a WHP case study.

BRONX HEALTH EDUCATION PROJECT FOR WEST AFRICAN IMMIGRANTS.

Science.gov (United States)

Wilson, Rebecca Dover; Elgoghail, Nadia

2016-01-01

The transition from a traditional West African diet and lifestyle to a modern diet has a significant impact on health and the risk of chronic disease. To implement a health education program for West African immigrants in the U.S. to address health risks associated with the modern diet. A health education program model targeted at West African immigrants in the Bronx was determined based on existing health education programs with educational materials, group education sessions, and targeted individual counseling. A health education program was successfully implemented at a clinic comprised of West African immigrant patients in the Bronx. This project demonstrates an example of a targeted health education program for West African immigrants to address health risks related to diet.

Is story-based blended learning a promising avenue for skin and sexual health education? Results from the PAEDIMED project.

Science.gov (United States)

Apfelbacher, Christian J; Deimling, Erika; Wulfhorst, Britta; Adler, Frederic; Diepgen, Thomas L; Linder, Dennis; Blenk, Holger; Stosiek, Nikolaus; Reinmann, Gabi

2010-03-01

The PAEDIMED study group developed a learning and teaching scenario for school health education in the area of skin and sexual health in Italy, Romania and Germany, combining web-based and traditional learning ("blended learning"). A questionnaire-based needs assessment and context analysis were conducted, based on which an education scenario was designed. Particular emphasis was put on emotional and motivational aspects, using narrative components in the didactic concept. The design process occupied a central role in the project (design-based research). Evaluation was both formative and summative. Continuous feedback was obtained from relevant stakeholders. Following a prototypical implementation, the scenario was evaluated using questionnaires. The results revealed a high level of acceptance of the education scenario as well as an increase in students' knowledge concerning skin and sexual health. Evaluation also suggested that health education is highly influenced by cultural background and habits as well as diverse contextual and personal conditions.

Research, design and development project Myoelectric Prosthesis of Upper Limb

International Nuclear Information System (INIS)

Galiano, L; Montaner, E; Flecha, A

2007-01-01

A Research Design and Development Project was developed of a myoelectric prosthesis for a pediatric patient presenting congenital amputation of the left forearm below the elbow. A multidisciplinary work-team was formed for this goal, in order to solve the several (/various) aspects regarding this project (mechanical, ergonomics, electronics, physical). The prosthesis as an electromechanical device was divided in several blocks, trying to achieve a focused development for each stage, acording to requisites. A mechanical prototype of the prothesis was designed and built along with the circuitry needed for EMG aquisition, control logic and drivers. Having acomplished the previuos stages, the project is now dealing with the definitions of the interface between the prosthesis and the patient, with promising perspectives

Research, design and development project Myoelectric Prosthesis of Upper Limb

Energy Technology Data Exchange (ETDEWEB)

Galiano, L; Montaner, E; Flecha, A [Bioparx, J Hernandez 1101, Parana, ERios (Argentina)

2007-11-15

A Research Design and Development Project was developed of a myoelectric prosthesis for a pediatric patient presenting congenital amputation of the left forearm below the elbow. A multidisciplinary work-team was formed for this goal, in order to solve the several (/various) aspects regarding this project (mechanical, ergonomics, electronics, physical). The prosthesis as an electromechanical device was divided in several blocks, trying to achieve a focused development for each stage, acording to requisites. A mechanical prototype of the prothesis was designed and built along with the circuitry needed for EMG aquisition, control logic and drivers. Having acomplished the previuos stages, the project is now dealing with the definitions of the interface between the prosthesis and the patient, with promising perspectives.

The state and profile of open source software projects in health and medical informatics.

Science.gov (United States)

Janamanchi, Balaji; Katsamakas, Evangelos; Raghupathi, Wullianallur; Gao, Wei

2009-07-01

Little has been published about the application profiles and development patterns of open source software (OSS) in health and medical informatics. This study explores these issues with an analysis of health and medical informatics related OSS projects on SourceForge, a large repository of open source projects. A search was conducted on the SourceForge website during the period from May 1 to 15, 2007, to identify health and medical informatics OSS projects. This search resulted in a sample of 174 projects. A Java-based parser was written to extract data for several of the key variables of each project. Several visually descriptive statistics were generated to analyze the profiles of the OSS projects. Many of the projects have sponsors, implying a growing interest in OSS among organizations. Sponsorship, we discovered, has a significant impact on project success metrics. Nearly two-thirds of the projects have a restrictive license type. Restrictive licensing may indicate tighter control over the development process. Our sample includes a wide range of projects that are at various stages of development (status). Projects targeted towards the advanced end user are primarily focused on bio-informatics, data formats, database and medical science applications. We conclude that there exists an active and thriving OSS development community that is focusing on health and medical informatics. A wide range of OSS applications are in development, from bio-informatics to hospital information systems. A profile of OSS in health and medical informatics emerges that is distinct and unique to the health care field. Future research can focus on OSS acceptance and diffusion and impact on cost, efficiency and quality of health care.

Experiences of Social Inclusion and Employment of Mental Health Service Users in a European Union Project

DEFF Research Database (Denmark)

Nieminen, Irja; Ramon, Shulamit; Dawson, Ian

2012-01-01

users experienced improvement in their social life. Employment and participation in meaningful activities continued to improve to the end of the EMILIA project, although at a slower pace. In addition, users were motivated for work and actively searched for employment. Having a mental illness, stigma......, and discrimination were reported to be obstacles to social inclusion. The difficulties identified in social relationships continued to exist. Conclusions: Train- ing intervention impact positively on mental health service users’ social inclusion and employment. However stigma, discrimination, and having a mental......ABSTRACT: Aims: The aim of this study is to describe how the mental health service users experienced social inclusion and employment in the EU EMILIA project. Methods: The study design is an intervention group follow-up study, with data collection at three points: baseline (T0), at 10-month follow...

Rural interdisciplinary mental health team building via satellite: a demonstration project.

Science.gov (United States)

Cornish, Peter A; Church, Elizabeth; Callanan, Terrence; Bethune, Cheri; Robbins, Carl; Miller, Robert

2003-01-01

This paper reports on the results of a demonstration project that examined the role of telehealth/telemedicine (hereafter referred to as telehealth) in providing interdisciplinary mental health training and support to health professionals in a rural region of Atlantic Canada. Special emphasis was placed on addressing the question of how training might affect interdisciplinary collaboration among the rural health professionals. Five urban mental health professionals from three disciplines provided training and support via video-satellite and internet, print and video resources to 34 rural health and community professionals. In order to assess the rural community's needs and the impact of the interventions, questionnaires were administered and on-site interviews were conducted before and after the project. Throughout the project, field notes were recorded and satisfaction ratings were obtained. Satisfaction with the video-satellite presentations was high and stable, with the exception of one session when signal quality was very poor. Rural participants were most satisfied with opportunities for interaction and least satisfied with the variable quality of the video transmission signal. High staff turnover among rural professionals resulted in insufficient power to permit statistical analysis. Positive reports of the project impact included expanded knowledge and heightened sensitivity to mental health issues, increased cross-disciplinary connections, and greater cohesion among professionals. The results suggest that, with some refinements, telehealth technology can be used to facilitate mental health training and promote interdisciplinary collaboration among professionals in a rural setting.

Implementing Project Based Learning Approach to Graphic Design Course

Science.gov (United States)

Riyanti, Menul Teguh; Erwin, Tuti Nuriah; Suriani, S. H.

2017-01-01

The purpose of this study was to develop a learning model based Commercial Graphic Design Drafting project-based learning approach, was chosen as a strategy in the learning product development research. University students as the target audience of this model are the students of the fifth semester Visual Communications Design Studies Program…

Incorporating climate change projections into riparian restoration planning and design

Science.gov (United States)

Perry, Laura G.; Reynolds, Lindsay V.; Beechie, Timothy J.; Collins, Mathias J.; Shafroth, Patrick B.

2015-01-01

Climate change and associated changes in streamflow may alter riparian habitats substantially in coming decades. Riparian restoration provides opportunities to respond proactively to projected climate change effects, increase riparian ecosystem resilience to climate change, and simultaneously address effects of both climate change and other human disturbances. However, climate change may alter which restoration methods are most effective and which restoration goals can be achieved. Incorporating climate change into riparian restoration planning and design is critical to long-term restoration of desired community composition and ecosystem services. In this review, we discuss and provide examples of how climate change might be incorporated into restoration planning at the key stages of assessing the project context, establishing restoration goals and design criteria, evaluating design alternatives, and monitoring restoration outcomes. Restoration planners have access to numerous tools to predict future climate, streamflow, and riparian ecology at restoration sites. Planners can use those predictions to assess which species or ecosystem services will be most vulnerable under future conditions, and which sites will be most suitable for restoration. To accommodate future climate and streamflow change, planners may need to adjust methods for planting, invasive species control, channel and floodplain reconstruction, and water management. Given the considerable uncertainty in future climate and streamflow projections, riparian ecological responses, and effects on restoration outcomes, planners will need to consider multiple potential future scenarios, implement a variety of restoration methods, design projects with flexibility to adjust to future conditions, and plan to respond adaptively to unexpected change.

Kemper County IGCC (tm) Project Preliminary Public Design Report

Energy Technology Data Exchange (ETDEWEB)

Nelson, Matt; Rush, Randall; Madden, Diane; Pinkston, Tim; Lunsford, Landon

2012-07-01

The Kemper County IGCC Project is an advanced coal technology project that is being developed by Mississippi Power Company (MPC). The project is a lignite-fueled 2-on-1 Integrated Gasification Combined-Cycle (IGCC) facility incorporating the air-blown Transport Integrated Gasification (TRIG™) technology jointly developed by Southern Company; Kellogg, Brown, and Root (KBR); and the United States Department of Energy (DOE) at the Power Systems Development Facility (PSDF) in Wilsonville, Alabama. The estimated nameplate capacity of the plant will be 830 MW with a peak net output capability of 582 MW. As a result of advanced emissions control equipment, the facility will produce marketable byproducts of ammonia, sulfuric acid, and carbon dioxide. 65 percent of the carbon dioxide (CO{sub 2}) will be captured and used for enhanced oil recovery (EOR), making the Kemper County facility’s carbon emissions comparable to those of a natural-gas-fired combined cycle power plant. The commercial operation date (COD) of the Kemper County IGCC plant will be May 2014. This report describes the basic design and function of the plant as determined at the end of the Front End Engineering Design (FEED) phase of the project.

Systematic review on what works, what does not work and why of implementation of mobile health (mHealth) projects in Africa.

Science.gov (United States)

Aranda-Jan, Clara B; Mohutsiwa-Dibe, Neo; Loukanova, Svetla

2014-02-21

Access to mobile phone technology has rapidly expanded in developing countries. In Africa, mHealth is a relatively new concept and questions arise regarding reliability of the technology used for health outcomes. This review documents strengths, weaknesses, opportunities, and threats (SWOT) of mHealth projects in Africa. A systematic review of peer-reviewed literature on mHealth projects in Africa, between 2003 and 2013, was carried out using PubMed and OvidSP. Data was synthesized using a SWOT analysis methodology. Results were grouped to assess specific aspects of project implementation in terms of sustainability and mid/long-term results, integration to the health system, management process, scale-up and replication, and legal issues, regulations and standards. Forty-four studies on mHealth projects in Africa were included and classified as: "patient follow-up and medication adherence" (n = 19), "staff training, support and motivation" (n = 2), "staff evaluation, monitoring and guidelines compliance" (n = 4), "drug supply-chain and stock management" (n = 2), "patient education and awareness" (n = 1), "disease surveillance and intervention monitoring" (n = 4), "data collection/transfer and reporting" (n = 10) and "overview of mHealth projects" (n = 2). In general, mHealth projects demonstrate positive health-related outcomes and their success is based on the accessibility, acceptance and low-cost of the technology, effective adaptation to local contexts, strong stakeholder collaboration, and government involvement. Threats such as dependency on funding, unclear healthcare system responsibilities, unreliable infrastructure and lack of evidence on cost-effectiveness challenge their implementation. mHealth projects can potentially be scaled-up to help tackle problems faced by healthcare systems like poor management of drug stocks, weak surveillance and reporting systems or lack of resources. mHealth in Africa is an innovative approach

Reflections from a Creative Community-Based Participatory Research Project Exploring Health and Body Image with First Nations Girls

Directory of Open Access Journals (Sweden)

Jennifer M. Shea PhD

2013-02-01

Full Text Available In Canada, Aboriginal peoples often experience a multitude of inequalities when compared with the general population, particularly in relation to health (e.g., increased incidence of diabetes. These inequalities are rooted in a negative history of colonization. Decolonizing methodologies recognize these realities and aim to shift the focus from communities being researched to being collaborative partners in the research process. This article describes a qualitative community-based participatory research project focused on health and body image with First Nations girls in a Tribal Council region in Western Canada. We discuss our project design and the incorporation of creative methods (e.g., photovoice to foster integration and collaboration as related to decolonizing methodology principles. This article is both descriptive and reflective as it summarizes our project and discusses lessons learned from the process, integrating evaluations from the participating girls as well as our reflections as researchers.

Integrated Safety in Design

DEFF Research Database (Denmark)

Schultz, Casper Siebken; Jørgensen, Kirsten

2014-01-01

An on-going research project investigates the inclusion of health and safety considerations in the design phase as a means to achieve a higher level of health and safety in the construction industry. Moreover, the approach is coupled to the overall quality efforts. Two architectural firms and two...... consulting engineering firms are project participants. The hypothesis is that health and safety problems in execution can be prevented through better planning in the early stages of the construction processes and that accidents are prevented by providing safety. In the first stage of the research project...... a theoretical framework is developed from a combination of existing literature on health and safety and a mapping of existing practices based on interviews in all four companies. The interviews revealed that the basic knowledge on OHS among architects and engineers is limited. Also currently designers typically...

A Design-Based Research Project on Information Literacy Focusing on Process, Reflections and Self-Feedback

Directory of Open Access Journals (Sweden)

Majbritt Ursula Johansen

2016-12-01

Full Text Available Many curriculums assume that the new generation of students are digital natives and information literate. However, studies show that this is not often the case. From these studies and our own experiences working with multidisciplinary students in the Health Sciences we found that students were not as information literate as required in the curriculum. Using Design Based Research as a method (following the four phases below, we developed a new information search process and a web-based tool with feedback opportunities from teachers and librarians in order to qualify the students competencies. Problem identification: Despite earlier initiatives from library and department, the students didn’t achieve higher levels of information literacy. Prototyping: Requirements and educational material were merged and tested while gathering feedback. Iterations: The prototype and feedback were evaluated and developed into a new information search process, which was tested and evaluated. Reflection and generalization: Initiative was taken to develope a web-based application visualizing the steps with the learning points: self-feedback, peer-feedback and counselor feedback. The result of the project is a new information search process model and a web-based learning environment called B!NKO 2.0. The evaluations have shown positive feedback on both the process and the web tool. The project has opened up new possibilities that go beyond the Health multidisciplinary students. A new project concerning the Humanities and Social Sciences is incipient. In this project new functionalities are also expected. B!NKO 2.0 has to a great extent shown its worth to help Health multidisciplinary students to get a deeper understanding of information literacy, and how to develop and change searches to get better results. B!NKO 2.0 has also given a positive "side effect” on the librarians work. Time spend on the "Book a Librarian” service have decreased for the librarians using

Computational issues in alternating projection algorithms for fixed-order control design

DEFF Research Database (Denmark)

Beran, Eric Bengt; Grigoriadis, K.

1997-01-01

Alternating projection algorithms have been introduced recently to solve fixed-order controller design problems described by linear matrix inequalities and non-convex coupling rank constraints. In this work, an extensive numerical experimentation using proposed benchmark fixed-order control design...... examples is used to indicate the computational efficiency of the method. These results indicate that the proposed alternating projections are effective in obtaining low-order controllers for small and medium order problems...

The Perinatal Mental Health and Wellness Project: Improving perinatal mental health outcomes by working together across sectors

OpenAIRE

Herde, Emily Louise

2018-01-01

This paper reports on the Perinatal Mental Health and Wellness Project which aimed to develop and evaluate a collaborative model for mental health promotion, illness prevention and early intervention in the perinatal period. The project took on a place-based action research approach, developing and trialling the model with expectant parents (n=537) engaged with Redcliffe Hospital Maternity Services in the Metro North Hospital and Health Service in Queensland, Australia, from 2015 – 2017.In Au...

Student-Designed Service-Learning Projects in an Undergraduate Neurobiology Course

Directory of Open Access Journals (Sweden)

Katharine V. Northcutt

2015-12-01

Full Text Available One of the challenges in teaching a service-learning course is obtaining student buy-in from all students in the course. To circumvent this problem, I have let students in my undergraduate Neurobiology course design their own service-learning projects at the beginning of the semester. Although this can be chaotic because it requires last-minute planning, I have made it successful through facilitating student communication in the classroom, requiring thorough project proposals, meeting with students regularly, and monitoring group progress through written reflection papers. Most of my students have strong opinions about the types of projects that they want to carry out, and many students have used connections that they have already made with local organizations. Almost all projects that students have designed to this point involve teaching basic concepts of neurobiology to children of various ages while simultaneously sparking their interest in science. Through taking ownership of the project and designing it such that it works well with their strengths, interests, and weekly schedule, students have become more engaged in service learning and view it as a valuable experience. Despite some class time being shifted away from more traditional assignments, students have performed equally well in the course, and they are more eager to talk with others about course concepts. Furthermore, the feedback that I have received from community partners has been excellent, and some students have maintained their work with the organizations.

Health physics program for the Edgemont Uranium Mill decommissioning project

International Nuclear Information System (INIS)

Polehn, J.L.; Wallace, R.G.; Reed, R.P.; Wilson, G.T.

1986-01-01

The Tennessee Valley Authority (TVA) is actively involved in decommissioning a uranium mill located near the town of Edgemont, South Dakota. The Edgemont Mill Decommissioning Project, which is unique in many respects, will involve dismantlement of the old inactive mill building and excavation and transportation of several million tons of uranium mill tailings to a permanent disposal site. To ensure that workers are adequately protected from radiation exposure during decommissioning operations, a health physics program appropriate for the decommissioning situation was developed. The Edgemont Mill Decommissioning Project Health Physics Manual (HPM) gives the programmatic requirements for worker radiation protection. The requirements of the HPM are implemented by means of detailed onsite operating procedures. The Edgemont project health physics program was developed using currently available regulations and guidance for an operating uranium mill with appropriate modifications for decommissioning. This paper discusses the development, implementation, and documentation of that program

Design considerations for a servo optical projection system

Science.gov (United States)

Nadalsky, Michael; Allen, Daniel; Bien, Joseph

1987-01-01

The present servooptical projection system (SOPS) furnishes 'out-the-window' scenery for a pilot-training flight simulator; attention is given to the parametric tradeoffs made in the SOPS' optical design, as well as to its mechanical packaging and the servonetwork performance of the unit as integrated into a research/training helicopter flight simulator. The final SOPS configuration is a function of scan head design, assembly modularity, image deterioration method, and focal lengths and relative apertures.

Geomatics engineering a practical guide to project design

CERN Document Server

Ogaja, Clement A

2010-01-01

OVERVIEWProject Design ProcessUnderstanding Project RequirementsInformation GatheringDesign ApproachesScheduling and Cost EstimatingWriting ProposalsBibliographyExercises CONTEMPORARY ISSUESStandards and SpecificationsDefinitionsApplication Modes of a StandardUnits of MeasureAccuracy versus PrecisionEquipment SpecificationsLimits of ClosureLeast Squares AnalysisMapping and GIS StandardsClassical Surveying StandardsGPS Surveying StandardsOther StandardsBibliography ExercisesProfessional and Ethical ResponsibilitiesKnow What You DoEthics and Professional Conduct Individual and Team Responsibilit

EXPERIENCE SANITARY-EPIDEMIOLOGICAL EXAMINATION PROJECT OF PLACING A SOURCE OF IONIZING RADIATION (GENERATING IN HEALTH CARE INSTITUTIONS

Directory of Open Access Journals (Sweden)

I. A. Rakitin

2015-01-01

Full Text Available The article reviews the results of long-term sanitary-epidemiological examination of projects of placing of ionizing radiation (generating sources in health care institutions of Saint-Petersburg. The majority among the placed sources presented for examination was X-ray diagnostic units and sets – 35.7%, dentist X-rays – 39.4% and fluorography units – 10.8%. Mammography units and computer tomographs made 6.7% each, accelerants – 0.7%.The most frequent reasons of primary refusals to accept design documentation were: absence of calculations of protection against all placed diagnostic X-ray devices (23.6% – at placing of diagnostic X-ray sets, 16.2% – at placing of dentist devices, absence of the upper floors layouts (26.5% – at placing of dentist X-rays and absence of permitting documentation for X-ray devices (at placing of dentist X-ray devices – 22.2%.At carrying out of design activity of special importance is creation of medical and technical projects which were absent in 22.9% of presented projects and in 34.6% were replaced with technical projects. Significant drawbacks of the projects were ignoring the necessity to consider the distance from the personnel workplaces and the width of technical passes (34.0%. That was caused by the absence of corresponding documentation from suppliers of equipment for X-ray rooms.At calculation of protection against X-ray radiation in 11.3% of projects of placing X-ray diagnostic devices (sets and in 7.7% of projects of placing dentist X-ray devices, radiation directivity factors (N were determined incorrectly.Of importance is the issue of adequate choice of building and finishing materials. In 50.0% of projects of placing of diagnostic X-ray devices (sets and 37.6% of projects of placing dentist X-ray devices there were no sanitary-epidemiological conclusions regarding the building and finishing materials to confirming their feasibility for healthcare institutions.Analysis of the main stages

Project W-236A, work plan for preparation of a design requirements document

International Nuclear Information System (INIS)

Groth, B.D.

1995-01-01

This work plan outlines the tasks necessary, and defines the organizational responsibilities for preparing a Design Requirements Document (DRD) for project W-236A, Multi-Function Waste Tank Facility (MWTF). A DRD is a Systems Engineering document which bounds, at a high level, the requirements of a discrete system element of the Tank Waste Remediation System (TWRS) Program. This system element is usually assigned to a specific project, in this case the MWTF. The DRD is the document that connects the TWRS program requirements with the highest level projects requirements and provides the project's link to the overall TWRS mission. The MWTF DRD effort is somewhat unique in that the project is already in detailed design, whereas a DRO is normally prepared prior to preliminary design. The MWTF design effort was initiated with a Functional Design Criteria (FDC) and a Supplemental Design Requirements Document (SDRD) bounding the high level requirements. Another unique aspect of this effort is that some of the TWRS program requirements are still in development. Because of these unique aspects of the MWTF DRD development, the MWTF will be developed from existing TWRS Program requirements and project specific requirements contained in the FDC and SDRD. The following list describes the objectives of the MWTF DRD: determine the primary functions of the tanks through a functional decomposition of the TWRS Program high level functions; allocate the primary functions to a sub-system architecture for the tanks; define the fundamental design features in terms of performance requirements for the system and subsystems; identify system interfaces and design constraints; and document the results in a DRD

Advertising a "Healthy Lifestyle:" A Cypriot Health Education Project

Science.gov (United States)

Ioannou, Soula

2006-01-01

This paper describes a health education program entitled "Young Consumer" project, financed by the European Union and implemented by the Cyprus Consumer Association between March and June 2004. The aim of the project was to promote a healthy lifestyle among a group of Cypriot primary school pupils (11-12 years old). Participants were…

Systems design and engineering : facilitating multidisciplinary development projects

NARCIS (Netherlands)

Bonnema, Gerrit Maarten; Veenvliet, Karel; Broenink, Johannes F.

2016-01-01

As its name implies, the aim of Systems Design and Engineering: Facilitating Multidisciplinary Development Projects is to help systems engineers develop the skills and thought processes needed to successfully develop and implement engineered systems. Such expertise typically does not come through

13 CFR 305.4 - Projects for design and engineering work.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Projects for design and engineering work. 305.4 Section 305.4 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION... construction Project in a format and in sufficient quantity to permit advertisement and award of a construction...

Privacy by design in personal health monitoring.

Science.gov (United States)

Nordgren, Anders

2015-06-01

The concept of privacy by design is becoming increasingly popular among regulators of information and communications technologies. This paper aims at analysing and discussing the ethical implications of this concept for personal health monitoring. I assume a privacy theory of restricted access and limited control. On the basis of this theory, I suggest a version of the concept of privacy by design that constitutes a middle road between what I call broad privacy by design and narrow privacy by design. The key feature of this approach is that it attempts to balance automated privacy protection and autonomously chosen privacy protection in a way that is context-sensitive. In personal health monitoring, this approach implies that in some contexts like medication assistance and monitoring of specific health parameters one single automatic option is legitimate, while in some other contexts, for example monitoring in which relatives are receivers of health-relevant information rather than health care professionals, a multi-choice approach stressing autonomy is warranted.

Design requirements document for Project W-465, immobilized low-activity waste interim storage

International Nuclear Information System (INIS)

Burbank, D.A.

1998-01-01

The scope of this Design Requirements Document (DRD) is to identify the functions and associated requirements that must be performed to accept, transport, handle, and store immobilized low-activity waste (ILAW) produced by the privatized Tank Waste Remediation System (TWRS) treatment contractors. The functional and performance requirements in this document provide the basis for the conceptual design of the TWRS ILAW Interim Storage facility project and provides traceability from the program level requirements to the project design activity. Technical and programmatic risk associated with the TWRS planning basis are discussed in the Tank Waste Remediation System Decisions and Risk Assessment (Johnson 1994). The design requirements provided in this document will be augmented by additional detailed design data documented by the project

Latin American special project: kidney health cooperation project between Uruguay and Bolivia.

Science.gov (United States)

Sola, Laura; Plata-Cornejo, Raúl; Fernández-Cean, Juan

2015-01-01

Uruguay and Bolivia are two countries that show heterogenicity of the Latin American region, including the national income, the expenditure on health and the services for renal care. In Bolivia, there is manpower shortage for renal care with only 5 nephrologists per million people (pmp) and the prevalence of patients on dialysis is only 200 pmp. This is much lower than the mean prevalence rate of renal replacement therapy for Latin America as a whole. Uruguay on the other hand has more dedicated renal resources with 50 nephrologists pmp, and renal replacement therapy is provided to ~ 1,000 dialysis patients pmp. In November 2012, a collaborative project financed by the Uruguayan International Cooperation Agency was signed by both the Uruguay and Bolivia Ministries of Health, and the goal was to develop a comprehensive program for the prevention and management of all stages of chronic kidney disease (CKD) in Bolivia. The specific objectives were to: a) promote renal healthcare in the primary healthcare setting, b) identify kidney disease in populations at risk, and c) optimize patient care at all stages of CKD, including dialysis and transplantation supported with a national ESRD registry in Bolivia. As a first step, delegates from the Bolivian Health Ministry, visited Uruguay in April 2014, primarily to strengthen the development of tools required for developing and maintaining a national registry. In addition, during this visit, a meeting with the president of the Latin American Society of Nephrology and Hypertension (SLANH) culminated in designing a training program for peritoneal dialysis. This highly cooperative relationship is advancing the prevention and care of CKD in Bolivia and may serve as a model for international approaches to advance system level CKD care in countries with limited healthcare resources.

Facilitating Client Value Creation in the Conceptual Design Phase of Construction Projects

DEFF Research Database (Denmark)

Thyssen, Mikael Hygum; Emmitt, Stephen; Bonke, Sten

2009-01-01

If client values are not fully understood in a construction project it is likely to result in either low fulfilment of client expectations or multiple design alterations during the project process which lead to additional costs and frustration among the project participants. However...... by the fact that the delivery team, which is responsible for understanding and delivering client value, is made up of even more different parties. The paper reports the initial outcome of a joint research project between academics and practitioners, which aims to develop a practical workshop model...... that incorporates client values into the conceptual design of construction projects. The workshop model draws on value management and lean thinking as underlying principles in an attempt to address the ambiguous concept of ‘value’....

Design of wearable health monitoring device

Science.gov (United States)

Devara, Kresna; Ramadhanty, Savira; Abuzairi, Tomy

2018-02-01

Wearable smart health monitoring devices have attracted considerable attention in both research community and industry. Some of the causes are the increasing healthcare costs, along with the growing technology. To address this demand, in this paper, design and evaluation of wearable health monitoring device integrated with smartphone were presented. This device was designed for patients in need of constant health monitoring. The performance of the proposed design has been tested by conducting measurement once in 2 minutes for 10 minutes to obtain heart rate and body temperature data. The comparation between data measured by the proposed device and that measured by the reference device yields only an average error of 1.45% for heart rate and 1.04% for body temperature.

Design for Health and Well Being: Knitted Products for Diabetics

Science.gov (United States)

Gault, A.

2016-07-01

This paper will discuss the design development, manufacturing and testing of knitted products maximizing the use of new innovations in Nano- technology and the integration of Phase Changing Materials specifically for diabetics. The project identified key aspects requiring design solutions to bring improvement to the circulatory problems with specific reference to the diabetic condition. Diabetics have particular difficulty in regulating their body temperature and this can result in the condition worsening, and resulting in loss of digits or limbs. The design of products to prevent the deterioration of the diabetic condition and to help those with limb loss was developed in collaboration with a Northern Ireland diabetic consultant, a product engineer and a knitwear designer. The fusion of ideas between the stakeholders resulted in the development and manufacture of a range of products that have been successfully tested at the yarn and fabric development stage and have been proven to maintain body temperature by either cooling or warming and therefore bring improvement to health and well-being. Whilst the product has a performance element the design ideas created desirable products that not only provided solutions to the brief but also resulted in products that had further market applications.

Colour and inclusivity: a visual communication design project with older people.

Science.gov (United States)

da Silva, Fernando Moreira

2012-01-01

In an ideal world, inclusive products and services would be the standard and not the exception. This paper presents a systematic approach to an overlap between Visual Communication Design, Printed Colour and Inclusive Design, for older people, with the aim to develop of a set of research-based ageing and ergonomics-centred communication design guidelines and recommendations for printed material (analogical displays). The approach included an initial extensive literature review in the area of colour, older people and ergonomics issues and vision common diseases, communication design. The second phase was the implementation of an experiment to measure the different colour experiences of the participants in two sample groups (one in UK and another one in Portugal), using printed material, to find out the colours one should use in analogical communication material, being aware of the colour contrast importance (foreground versus background) and the difficulties experienced by older people to read and understand lettering, signs. As main contribution of this research project, we developed a set of guidelines and recommendations based on the reviewed literature and the sample groups' findings, trying to demonstrate the importance of these guidelines when conceiving a new communicational design project in a way this project will achieve vision comfort and understandability, especially for older people, in an inclusive design perspective.

The Teen Photovoice Project: A Pilot Study to Promote Health Through Advocacy

Science.gov (United States)

Necheles, Jonathan W.; Chung, Emily Q.; Hawes-Dawson, Jennifer; Ryan, Gery W.; Williams, La’Shield B.; Holmes, Heidi N.; Wells, Kenneth B.; Vaiana, Mary E.; Schuster, Mark A.

2009-01-01

Background Clinicians, public health practitioners, and policymakers would like to understand how youth perceive health issues and how they can become advocates for health promotion in their communities. 1,2 Traditional research methods can be used to capture these perceptions, but are limited in their ability to activate (excite and engage) youth to participate in health promotion activities. Objectives To pilot the use of an adapted version of photovoice as a starting point to engage youth in identifying influences on their health behaviors in a process that encourages the development of health advocacy projects. Methods Application of qualitative and quantitative methods to a participatory research project that teaches youth the photovoice method to identify and address health promotion issues relevant to their lives. Participants included 13 students serving on a Youth Advisory Board (YAB) of the UCLA/RAND Center for Adolescent Health Promotion working in four small groups of two to five participants. Students were from the Los Angeles, California, metropolitan area. Results Results were derived from photograph sorting activities, analysis of photograph narratives, and development of advocacy projects. Youth frequently discussed a variety of topics reflected in their pictures that included unhealthy food choices, inducers of stress, friends, emotions, environment, health, and positive aspects of family. The advocacy projects used social marketing strategies, focusing on unhealthy dietary practices and inducers of stress. The youths’ focus on obesity-related issues have contributed to the center’s success in partnering with the Los Angeles Unified School District on a new community-based participatory research (CBPR) project. Conclusion Youth can engage in a process of identifying community-level health influences, leading to health promotion through advocacy. Participants focused their advocacy work on selected issues addressing the types of unhealthy food

[Role of "Health" National project in improvement of health parameters in working population].

Science.gov (United States)

Bykovskaia, T Iu

2011-01-01

The author analyzed results of "Health" National project accomplishment in Rostov region over 2006-2009. Findings are that quality of primary medical care has improved, material and technical basis of municipal health care institutions has progressed, salary of primary health care division specialists has increased. Over this period, infant mortality and mortality among able-bodied population in the region has decreased, birth rate has increased, coefficient of natural loss of population has reduced, life expectancy has increased.

Improving Pain Care with Project ECHO in Community Health Centers.

Science.gov (United States)

Anderson, Daren; Zlateva, Ianita; Davis, Bennet; Bifulco, Lauren; Giannotti, Tierney; Coman, Emil; Spegman, Douglas

2017-10-01

Pain is an extremely common complaint in primary care, and patient outcomes are often suboptimal. This project evaluated the impact of Project ECHO Pain videoconference case-based learning sessions on knowledge and quality of pain care in two Federally Qualified Health Centers. Quasi-experimental, pre-post intervention, with comparison group. Two large, multisite federally qualified health centers in Connecticut and Arizona. Intervention (N = 10) and comparison (N = 10) primary care providers. Primary care providers attended 48 weekly Project ECHO Pain sessions between January and December 2013, led by a multidisciplinary pain specialty team. Surveys and focus groups assessed providers' pain-related knowledge and self-efficacy. Electronic health record data were analyzed to evaluate opioid prescribing and specialty referrals. Compared with control, primary care providers in the intervention had a significantly greater increase in pain-related knowledge and self-efficacy. Providers who attended ECHO were more likely to use formal assessment tools and opioid agreements and refer to behavioral health and physical therapy compared with control providers. Opioid prescribing decreased significantly more among providers in the intervention compared with those in the control group. Pain is an extremely common and challenging problem, particularly among vulnerable patients such as those cared for at the more than 1,200 Federally Qualified Health Centers in the United States. In this study, attendance at weekly Project ECHO Pain sessions not only improved knowledge and self-efficacy, but also altered prescribing and referral patterns, suggesting that knowledge acquired during ECHO sessions translated into practice changes. © 2017 American Academy of Pain Medicine.

Designing a community-based lay health advisor training curriculum to address cancer health disparities.

Science.gov (United States)

Gwede, Clement K; Ashley, Atalie A; McGinnis, Kara; Montiel-Ishino, F Alejandro; Standifer, Maisha; Baldwin, Julie; Williams, Coni; Sneed, Kevin B; Wathington, Deanna; Dash-Pitts, Lolita; Green, B Lee

2013-05-01

Racial and ethnic minorities have disproportionately higher cancer incidence and mortality than their White counterparts. In response to this inequity in cancer prevention and care, community-based lay health advisors (LHAs) may be suited to deliver effective, culturally relevant, quality cancer education, prevention/screening, and early detection services for underserved populations. APPROACH AND STRATEGIES: Consistent with key tenets of community-based participatory research (CBPR), this project engaged community partners to develop and implement a unique LHA training curriculum to address cancer health disparities among medically underserved communities in a tricounty area. Seven phases of curriculum development went into designing a final seven-module LHA curriculum. In keeping with principles of CBPR and community engagement, academic-community partners and LHAs themselves were involved at all phases to ensure the needs of academic and community partners were mutually addressed in development and implementation of the LHA program. Community-based LHA programs for outreach, education, and promotion of cancer screening and early detection, are ideal for addressing cancer health disparities in access and quality care. When community-based LHAs are appropriately recruited, trained, and located in communities, they provide unique opportunities to link, bridge, and facilitate quality cancer education, services, and research.

Health Maintenance System (HMS) Hardware Research, Design, and Collaboration

Science.gov (United States)

Gonzalez, Stefanie M.

2010-01-01

The Space Life Sciences division (SLSD) concentrates on optimizing a crew member's health. Developments are translated into innovative engineering solutions, research growth, and community awareness. This internship incorporates all those areas by targeting various projects. The main project focuses on integrating clinical and biomedical engineering principles to design, develop, and test new medical kits scheduled for launch in the Spring of 2011. Additionally, items will be tagged with Radio Frequency Interference Devices (RFID) to keep track of the inventory. The tags will then be tested to optimize Radio Frequency feed and feed placement. Research growth will occur with ground based experiments designed to measure calcium encrusted deposits in the International Space Station (ISS). The tests will assess the urine calcium levels with Portable Clinical Blood Analyzer (PCBA) technology. If effective then a model for urine calcium will be developed and expanded to microgravity environments. To support collaboration amongst the subdivisions of SLSD the architecture of the Crew Healthcare Systems (CHeCS) SharePoint site has been redesigned for maximum efficiency. Community collaboration has also been established with the University of Southern California, Dept. of Aeronautical Engineering and the Food and Drug Administration (FDA). Hardware disbursements will transpire within these communities to support planetary surface exploration and to serve as an educational tool demonstrating how ground based medicine influenced the technological development of space hardware.

Interactive Room Support for Complex and Distributed Design Projects

DEFF Research Database (Denmark)

Grønbæk, Kaj; Gundersen, Kristian Kroyer; Mogensen, Preben Holst

2001-01-01

We are investigating the design of digital 3D interaction technology embedded in a physical environment. We take as point of departure cemplex, collaborative industrial design projects involving heterogeneous sets of documents, and physical as well as digital 3D models. The paper introduces our...... interaction devices being experimented with in the interactive room environment. The interactive room technologies have all been designed with the requirement that they must seamlessly integrate both into the physical and into the digital work environment while providing new affordances for industrial design...

Design, development and first validation of a transcoding system from ICD-9-CM to ICD-10 in the IT.DRG Italian project.

Science.gov (United States)

Della Mea, Vincenzo; Vuattolo, Omar; Frattura, Lucilla; Munari, Flavia; Verdini, Eleonora; Zanier, Loris; Arcangeli, Laura; Carle, Flavia

2015-01-01

In Italy, ICD-9-CM is currently used for coding health conditions at hospital discharge, but ICD-10 is being introduced thanks to the IT-DRG Project. In this project, one needed component is a set of transcoding rules and associated tools for easing coders work in the transition. The present paper illustrates design and development of those transcoding rules, and their preliminary testing on a subset of Italian hospital discharge data.

Project MEDSAT: The design of a remote sensing platform for malaria research and control

Science.gov (United States)

1991-04-01

Project MEDSAT was proposed with the specific goal of designing a satellite to remotely sense pertinent information useful in establishing strategies to control malaria. The 340 kg MEDSAT satellite is to be inserted into circular earth orbit aboard the Pegasus Air-Launched Space Booster at an inclination of 21 degrees and an altitude of 473 km. It is equipped with a synthetic aperture radar and a visible thermal/infrared sensor to remotely sense conditions at the target area of Chiapas, Mexico. The orbit is designed so that MEDSAT will pass over the target site twice each day. The data from each scan will be downlinked to Hawaii for processing, resulting in maps indicating areas of high malaria risk. These will be distributed to health officials at the target site. A relatively inexpensive launch by Pegasus and a design using mainly proven, off-the-shelf technology permit a low mission cost, while innovations in the satellite controls and the scientific instruments allow a fairly complex mission.

A Web-Based Monitoring System for Multidisciplinary Design Projects

Science.gov (United States)

Rogers, James L.; Salas, Andrea O.; Weston, Robert P.

1998-01-01

In today's competitive environment, both industry and government agencies are under pressure to reduce the time and cost of multidisciplinary design projects. New tools have been introduced to assist in this process by facilitating the integration of and communication among diverse disciplinary codes. One such tool, a framework for multidisciplinary computational environments, is defined as a hardware and software architecture that enables integration, execution, and communication among diverse disciplinary processes. An examination of current frameworks reveals weaknesses in various areas, such as sequencing, displaying, monitoring, and controlling the design process. The objective of this research is to explore how Web technology, integrated with an existing framework, can improve these areas of weakness. This paper describes a Web-based system that optimizes and controls the execution sequence of design processes; and monitors the project status and results. The three-stage evolution of the system with increasingly complex problems demonstrates the feasibility of this approach.

Systematic review on what works, what does not work and why of implementation of mobile health (mHealth) projects in Africa

Science.gov (United States)

2014-01-01

Background Access to mobile phone technology has rapidly expanded in developing countries. In Africa, mHealth is a relatively new concept and questions arise regarding reliability of the technology used for health outcomes. This review documents strengths, weaknesses, opportunities, and threats (SWOT) of mHealth projects in Africa. Methods A systematic review of peer-reviewed literature on mHealth projects in Africa, between 2003 and 2013, was carried out using PubMed and OvidSP. Data was synthesized using a SWOT analysis methodology. Results were grouped to assess specific aspects of project implementation in terms of sustainability and mid/long-term results, integration to the health system, management process, scale-up and replication, and legal issues, regulations and standards. Results Forty-four studies on mHealth projects in Africa were included and classified as: “patient follow-up and medication adherence” (n = 19), “staff training, support and motivation” (n = 2), “staff evaluation, monitoring and guidelines compliance” (n = 4), “drug supply-chain and stock management” (n = 2), “patient education and awareness” (n = 1), “disease surveillance and intervention monitoring” (n = 4), “data collection/transfer and reporting” (n = 10) and “overview of mHealth projects” (n = 2). In general, mHealth projects demonstrate positive health-related outcomes and their success is based on the accessibility, acceptance and low-cost of the technology, effective adaptation to local contexts, strong stakeholder collaboration, and government involvement. Threats such as dependency on funding, unclear healthcare system responsibilities, unreliable infrastructure and lack of evidence on cost-effectiveness challenge their implementation. mHealth projects can potentially be scaled-up to help tackle problems faced by healthcare systems like poor management of drug stocks, weak surveillance and reporting systems or

Health Informatics and E-health Curriculum for Clinical Health Profession Degrees.

Science.gov (United States)

Gray, Kathleen; Choo, Dawn; Butler-Henderson, Kerryn; Whetton, Sue; Maeder, Anthony

2015-01-01

The project reported in this paper models a new approach to making health informatics and e-health education widely available to students in a range of Australian clinical health profession degrees. The development of a Masters level subject uses design-based research to apply educational quality assurance practices which are consistent with university qualification frameworks, and with clinical health profession education standards; at the same time it gives recognition to health informatics as a specialised profession in its own right. The paper presents details of (a) design with reference to the Australian Qualifications Framework and CHIA competencies, (b) peer review within a three-university teaching team, (c) external review by experts from the professions, (d) cross-institutional interprofessional online learning, (e) methods for evaluating student learning experiences and outcomes, and (f) mechanisms for making the curriculum openly available to interested parties. The project has sought and found demand among clinical health professionals for formal health informatics and e-health education that is designed for them. It has helped the educators and organisations involved to understand the need for nuanced and complementary health informatics educational offerings in Australian universities. These insights may aid in further efforts to address substantive and systemic challenges that clinical informatics faces in Australia.

System Design and Engineering, lubricating multidisciplinary development projects

NARCIS (Netherlands)

Bonnema, Gerrit Maarten; Veenvliet, Karel; Broenink, Johannes F.

This text book introduces systems engineering for designing systems in multidisciplinary projects. First an overview of the systems engineering process is given. Several systems thinking tracks are presented, to think about the system in a number of ways, its context, its user, its functionality,

Integrated Environment and Safety and Health Management System (ISMS) Implementation Project Plan

Energy Technology Data Exchange (ETDEWEB)

MITCHELL, R.L.

2000-01-10

The Integrated Environment, Safety and Health Management System (ISMS) Implementation Project Plan serves as the project document to guide the Fluor Hanford, Inc (FHI) and Major Subcontractor (MSC) participants through the steps necessary to complete the integration of environment, safety, and health into management and work practices at all levels.

Integrated Environment and Safety and Health Management System (ISMS) Implementation Project Plan

International Nuclear Information System (INIS)

MITCHELL, R.L.

2000-01-01

The Integrated Environment, Safety and Health Management System (ISMS) Implementation Project Plan serves as the project document to guide the Fluor Hanford, Inc (FHI) and Major Subcontractor (MSC) participants through the steps necessary to complete the integration of environment, safety, and health into management and work practices at all levels

A quantitative analysis study on the implementation of partnering in the design and build construction project

Science.gov (United States)

Halil, F. M.; Nasir, N. M.; Shukur, A. S.; Hashim, H.

2018-02-01

Design and Build construction project involved the biggest scale of the cost of investment as compared to the traditional approach. In Design and Build, the client hires a design professional that will design according to the client’s need and specification. This research aim is to explore the concept of partnering implementation practiced in the design and build procurement approach. Therefore, the selection of design professionals such as Contractors and consultants in the project is crucial to ensure the successful project completion on time, cost, and quality. The methodology adopted using quantitative approach. Administration of the questionnaire was distributed to the public client by using postal survey. Outcomes of the results, the public clients agreed that project management capabilities and commitment to budget as a crucial element of partnering from the design professional in design and build construction project.

Managing nuclear projects: a design agency experience in the design-build of waste management facilities in Canada

International Nuclear Information System (INIS)

Brewer, R.; Calzolari, L.

2006-01-01

Quality Assurance guarantees the quality of a product; it does not guarantee that it is a quality product. As procedures develop to satisfy QA programs and regulatory needs it is necessary to find ways to ensure that procedural management reinforces project management and does not detract from it. CANATOM NPM's experience in bidding for and executing the design or design and construction of nuclear waste management facilities demonstrates how design excellence and innovation can still be achieved while successfully managing the challenge of technical administration. The sourcing of expertise, the intricacies of design definition and the coordinating efforts required in the execution of the projects (one fully completed, the other into its engineering phase) will provide a valuable insight into the role and activities of an engineering company engaged in a 'Design Agency' (DA) role. (author)

Improving the quality of health services organization structure by reengineering: circular design and clinical case impact in an academic medical center.

Science.gov (United States)

Lartin-Drake, J M; Curran, C; Gillis-Donovan, J; Kruger, N R; Ziegenfuss, J T; Ostrem, J; Zanotti, M

1996-01-01

Innovation to improve the quality of structure and process in health care organization is reported in this case example of change in an academic medical center. Interactive planning and the circular organization design concept were the driving principles and methods. This report presents the needs for and initial obstructions to change, planning and project design work, a description of the change process, and illustrative accomplishments to date--two cases, one of conscious sedation policy and one of nuisance pages. Evaluative criteria for judging the progress and lessons of the project regarding key design characteristics also are included.

Design of inverters for the PHOTONERGY project

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-08-01

The PHOTONERGY project (the former SolcelleInverter project) was initiated on the 1st of September 2001, with a state-of-the-art analysis, which concluded into specifications. Based on this 23 topologies were analyzed in for efficiencies. The results from this analysis was five candidates which all showed a somewhat good efficiency. These five topologies were in further investigated by means of an initial design-iteration and simulations. Two different solutions were picked up in due to their high efficiency and low cost. 1. The standard full-bridge phase shifted DC/DC converter together with a standard DC/AC inverter, 2. A modified version of the novel Shimizu topology. A patent is pending on this modified version. These two inverters are in this document developed and made ready for prototyping. This includes design and selection of reactive- and switching-components, e.g. filter- and bulk-capacitors, low- and high-frequency inductors, high frequency transformers, MOSFETs and diodes. The design of auxiliary circuits is also included, e.g. gate drivers for the MOSFETs, measuring circuits for the grid-current and -voltage, PV-module-current and voltage, protection circuits, hardware near controllers and finally a switch mode power supply. However, the design of the various controllers, except the hardware near PV-current controller for the full bridge phase shifted converter, is not documented in this report but will come later on. This includes all controllers, e.g. maximum power point tracking for the PV-module, utility grid current controller, DC-link voltage controller, phase locked loops, and detection of islanding operation. All of these control loops are to be implemented in a micro-controller. (au)

An intelligent and interactive carpet role of design in a textile innovation project

NARCIS (Netherlands)

Deckers, E.J.L.; Stouw, van der B.; Peutz, J.

2012-01-01

This paper presents an ongoing innovation project on the development of an intelligent and interactive carpet called PeR+, short for Perception Rug Plus. This design-research project is a collaboration between an international flooring company, DESSO, and the Department of Industrial Design at the

Integration and the hold-up problem in the design organization for engineering projects

NARCIS (Netherlands)

Zerjav, Vedran; Hartmann, Timo; Javernick-Will, A.; Chinowsky, P.

2012-01-01

The paper presents a perspective of the design organization in engineering projects based on the economic concept of the hold-up problem. By integrating the economic theories on the boundaries of organizations into the existing knowledge on design in engineering projects, the paper hypothesizes a

Disseminating relevant health information to underserved audiences: implications of the Digital Divide Pilot Projects.

Science.gov (United States)

Kreps, Gary L

2005-10-01

This paper examines the influence of the digital divide on disparities in health outcomes for vulnerable populations, identifying implications for medical and public libraries. The paper describes the results of the Digital Divide Pilot Projects demonstration research programs funded by the National Cancer Institute to test new strategies for disseminating relevant health information to underserved and at-risk audiences. The Digital Divide Pilot Projects field-tested innovative systemic strategies for helping underserved populations access and utilize relevant health information to make informed health-related decisions about seeking appropriate health care and support, resisting avoidable and significant health risks, and promoting their own health. The paper builds on the Digital Divide Pilot Projects by identifying implications for developing health communication strategies that libraries can adopt to provide digital health information to vulnerable populations.

SLUDGE TREATMENT PROJECT KOP CONCEPTUAL DESIGN CONTROL DECISION REPORT

International Nuclear Information System (INIS)

Carro, C.A.

2010-01-01

This control decision addresses the Knock-Out Pot (KOP) Disposition KOP Processing System (KPS) conceptual design. The KPS functions to (1) retrieve KOP material from canisters, (2) remove particles less than 600 (micro)m in size and low density materials from the KOP material, (3) load the KOP material into Multi-Canister Overpack (MCO) baskets, and (4) stage the MCO baskets for subsequent loading into MCOs. Hazard and accident analyses of the KPS conceptual design have been performed to incorporate safety into the design process. The hazard analysis is documented in PRC-STP-00098, Knock-Out Pot Disposition Project Conceptual Design Hazard Analysis. The accident analysis is documented in PRC-STP-CN-N-00167, Knock-Out Pot Disposition Sub-Project Canister Over Lift Accident Analysis. Based on the results of these analyses, and analyses performed in support of MCO transportation and MCO processing and storage activities at the Cold Vacuum Drying Facility (CVDF) and Canister Storage Building (CSB), control decision meetings were held to determine the controls required to protect onsite and offsite receptors and facility workers. At the conceptual design stage, these controls are primarily defined by their safety functions. Safety significant structures, systems, and components (SSCs) that could provide the identified safety functions have been selected for the conceptual design. It is anticipated that some safety SSCs identified herein will be reclassified based on hazard and accident analyses performed in support of preliminary and detailed design.

Designing “Theory of Machines and Mechanisms” course on Project Based Learning approach

DEFF Research Database (Denmark)

Shinde, Vikas

2013-01-01

by the industry and the learning outcomes specified by the National Board of Accreditation (NBA), India; this course is restructured on Project Based Learning approach. A mini project is designed to suit course objectives. An objective of this paper is to discuss the rationale of this course design......Theory of Machines and Mechanisms course is one of the essential courses of Mechanical Engineering undergraduate curriculum practiced at Indian Institute. Previously, this course was taught by traditional instruction based pedagogy. In order to achieve profession specific skills demanded...... and the process followed to design a project which meets diverse objectives....

The PEP-II Project: Low-Energy Ring Design and Project Status

International Nuclear Information System (INIS)

Zisman, Michael S.

2006-01-01

We describe the present status of the PEP-II project. The project comprises four major systems: Injector, High-Energy Ring (HER), Low-Energy Ring (LER), and Interaction Region (IR). We focus in detail on the design of the LER, as its parameters and requirements are most closely related to those required for the Beijing Tau-Charm Factory rings. The PEP-II LER is a high-current, 3.1-GeV positron ring mounted above the 9-GeV HER. The LER uses a wiggler located in one of its six straight sections to provide emittance control and additional damping. We describe the rather complicated IR, which must transport the LER beam into the plane of the HER, focus it to a common beam size, and separate the beams after the head-on collisions. Both permanent magnet and conventional electromagnets are used in this area. The LER lattice has now adopted a simplified non-interleaved sextupole correction scheme that has reduced the required number of sextupoles substantially. We describe the LER vacuum system, one of the most challenging subsystems in PEP-II. It employs several technologies. In the arcs, aluminum extrusions and titanium sublimation pumps are employed; the straight sections use stainless steel chambers with lumped ion pumps. In the wiggler area, an extended copper photon dump with nonevaporable getter (NEG) pumps is employed to handle the very large synchrotron radiation power. The design of the room-temperature RF system, the bunch-by-bunch longitudinal and transverse feedback systems, and some of the special diagnostics will be described briefly. The PEP-II project remains on schedule to begin commissioning of the HER in April 1997, followed by the LER a year later

Generic project definitions for improvement of health care delivery: a case-based approach.

Science.gov (United States)

Niemeijer, Gerard C; Does, Ronald J M M; de Mast, Jeroen; Trip, Albert; van den Heuvel, Jaap

2011-01-01

The purpose of this article is to create actionable knowledge, making the definition of process improvement projects in health care delivery more effective. This study is a retrospective analysis of process improvement projects in hospitals, facilitating a case-based reasoning approach to project definition. Data sources were project documentation and hospital-performance statistics of 271 Lean Six Sigma health care projects from 2002 to 2009 of general, teaching, and academic hospitals in the Netherlands and Belgium. Objectives and operational definitions of improvement projects in the sample, analyzed and structured in a uniform format and terminology. Extraction of reusable elements of earlier project definitions, presented in the form of 9 templates called generic project definitions. These templates function as exemplars for future process improvement projects, making the selection, definition, and operationalization of similar projects more efficient. Each template includes an explicated rationale, an operationalization in the form of metrics, and a prototypical example. Thus, a process of incremental and sustained learning based on case-based reasoning is facilitated. The quality of project definitions is a crucial success factor in pursuits to improve health care delivery. We offer 9 tried and tested improvement themes related to patient safety, patient satisfaction, and business-economic performance of hospitals.

Integration of case study approach, project design and computer ...

African Journals Online (AJOL)

Integration of case study approach, project design and computer modeling in managerial accounting education ... Journal of Fundamental and Applied Sciences ... in the Laboratory of Management Accounting and Controlling Systems at the ...

Design and Analysis of Architectures for Structural Health Monitoring Systems

Science.gov (United States)

Mukkamala, Ravi; Sixto, S. L. (Technical Monitor)

2002-01-01

During the two-year project period, we have worked on several aspects of Health Usage and Monitoring Systems for structural health monitoring. In particular, we have made contributions in the following areas. 1. Reference HUMS architecture: We developed a high-level architecture for health monitoring and usage systems (HUMS). The proposed reference architecture is shown. It is compatible with the Generic Open Architecture (GOA) proposed as a standard for avionics systems. 2. HUMS kernel: One of the critical layers of HUMS reference architecture is the HUMS kernel. We developed a detailed design of a kernel to implement the high level architecture.3. Prototype implementation of HUMS kernel: We have implemented a preliminary version of the HUMS kernel on a Unix platform.We have implemented both a centralized system version and a distributed version. 4. SCRAMNet and HUMS: SCRAMNet (Shared Common Random Access Memory Network) is a system that is found to be suitable to implement HUMS. For this reason, we have conducted a simulation study to determine its stability in handling the input data rates in HUMS. 5. Architectural specification.

The Heartfile Lodhran CVD prevention project--end of project evaluation.

Science.gov (United States)

Nishtar, Sania; Badar, Asma; Kamal, Mohammad Umer; Iqbal, Azhar; Bajwa, Rashid; Shah, Tauqeer; Larik, Zahid; Karim, Fazle; Mehmood, Mahmood ul Hassan; Jehangir, Haroon; Azam, Syed Iqbal; Mirza, Yasir Abbas; Khan, Shahzad Ali; Qayyum, Aamra; Aqeel, Fauzia; Bakir, Abdul; Rahim, Ejaz

2007-01-01

Mainstream preventive interventions often fail to reach poor populations with a high risk of cardiovascular diseases (CVDs) in Pakistan. A community-based CVD primary prevention project aimed at developing approaches to reduce risk factors in such populations was established by Heartfile in collaboration with the National Rural Support Program in the district of Lodhran. The project implemented a range of activities integrated with existing social and health service mechanisms during a three year intervention period 2000/01-03/04. These were targeted in 4 key settings: community health education, mass media interventions, training of health professionals and health education through Lady Health Workers. The project received support from the Department for International Development, U.K. At the community level, a pre-test-post-test quasi-experimental design was used for examining project outcomes related to the community component of the intervention. Pre and post-intervention (training) evaluations were conducted involving all health care providers in randomly selected workshops in order to determine baseline levels of knowledge and the impact of training on knowledge level. In order to assess practices of physician and non-physician health care providers patient interviews, with control comparisons were conducted at each health care facility. Significant positive changes were observed in knowledge levels at a community level in the district of intervention compared with baseline knowledge levels particularly in relation to a heart healthy diet, beneficial level of physical activity, the causes of high blood pressure and heart attack and the effects of high blood pressure and active and passive smoking on health. Significant changes in behaviors at a practice level were not shown in the district of intervention. However the project played a critical role in spurring national action for the prevention and control of non-communicable diseases and introducing

Design of management information system for nuclear industry architectural project costs

International Nuclear Information System (INIS)

Zhang Xingzhi; Li Wei

1996-01-01

Management Information System (MIS) for nuclear industry architectural project is analysed and designed in detail base on quota management and engineering budget management of nuclear industry in respect of the practice of Qinshan Second Phase 2 x 600 MW Project

Reorienting health services with capacity building: a case study of the Core Skills in Health Promotion Project.

Science.gov (United States)

Yeatman, H R; Nove, T

2002-12-01

This paper presents a case study of the application of a framework for capacity building [Hawe, P., King, L., Noort, M., Jordens, C. and Lloyd, B. (2000) Indicators to Help with Capacity Building in Health Promotion. NSW Health, Sydney] to describe actions aimed at building organizational support for health promotion within an area health service in New South Wales, Australia. The Core Skills in Health Promotion Project (CSHPP) arose from an investigation which reported that participants of a health promotion training course had increased health promotion skills but that they lacked the support to apply their skills in the workplace. The project was action-research based. It investigated and facilitated the implementation of a range of initiatives to support community health staff to apply a more preventive approach in their practice and it contributed to the establishment of new organizational structures for health promotion. An evaluation was undertaken 4 years after the CSHPP was established, and 2 years after it had submitted its final report. Interviews with senior managers, document analysis of written reports, and focus groups with middle managers and service delivery staff were undertaken. Change was achieved in the three dimensions of health infrastructure, program maintenance and problem solving capacity of the organization. It was identified that the critically important elements in achieving the aims of the project-partnership, leadership and commitment-were also key elements of the capacity building framework. This case study provides a practical example of the usefulness of the capacity building framework in orienting health services to be supportive of health promotion.

A Case Study of User-Centred Design in Four Swiss RUP Projects

Directory of Open Access Journals (Sweden)

Ljiljana Vukelja

2010-01-01

Full Text Available We analysed four Rational Unified Process (RUP projects in Switzerland that identified themselves as following a user-centred approach. Grounded theory served for analysis of 12 interviews with software developers, project managers, and UI specialists. For each professional group we analysed their work context, motivations, work practices, and strategies used to overcome the obstacles to user-centred design. Results show that end users did not participate in the projects. Instead of working directly with end users, participants used data from marketing research or consulted colleagues from other departments. Prototypes played an important role. We suggest the following remedies: (1 developing methods for easy integration of existing company knowledge about products with usability features, (2 professionalising UI design by educating project stakeholders in standard UI design, (3 creating an approved pool of company's personas for UI specialists' work, and (4 educating customers on their right to get good user interfaces.

Solar Collector Design Optimization: A Hands-on Project Case Study

Science.gov (United States)

Birnie, Dunbar P., III; Kaz, David M.; Berman, Elena A.

2012-01-01

A solar power collector optimization design project has been developed for use in undergraduate classrooms and/or laboratories. The design optimization depends on understanding the current-voltage characteristics of the starting photovoltaic cells as well as how the cell's electrical response changes with increased light illumination. Students…

Is the Alma Ata vision of comprehensive primary health care viable? Findings from an international project.

Science.gov (United States)

Labonté, Ronald; Sanders, David; Packer, Corinne; Schaay, Nikki

2014-01-01

The 4-year (2007-2011) Revitalizing Health for All international research program (http://www.globalhealthequity.ca/projects/proj_revitalizing/index.shtml) supported 20 research teams located in 15 low- and middle-income countries to explore the strengths and weaknesses of comprehensive primary health care (CPHC) initiatives at their local or national levels. Teams were organized in a triad comprised of a senior researcher, a new researcher, and a 'research user' from government, health services, or other organizations with the authority or capacity to apply the research findings. Multiple regional and global team capacity-enhancement meetings were organized to refine methods and to discuss and assess cross-case findings. Most research projects used mixed methods, incorporating analyses of qualitative data (interviews and focus groups), secondary data, and key policy and program documents. Some incorporated historical case study analyses, and a few undertook new surveys. The synthesis of findings in this report was derived through qualitative analysis of final project reports undertaken by three different reviewers. Evidence of comprehensiveness (defined in this research program as efforts to improve equity in access, community empowerment and participation, social and environmental health determinants, and intersectoral action) was found in many of the cases. Despite the important contextual differences amongst the different country studies, the similarity of many of their findings, often generated using mixed methods, attests to certain transferable health systems characteristics to create and sustain CPHC practices. These include:1. Well-trained and supported community health workers (CHWs) able to work effectively with marginalized communities2. Effective mechanisms for community participation, both informal (through participation in projects and programs, and meaningful consultation) and formal (though program management structures)3.�

Is the Alma Ata vision of comprehensive primary health care viable? Findings from an international project

Directory of Open Access Journals (Sweden)

Ronald Labonté

2014-08-01

Full Text Available Background: The 4-year (2007–2011 Revitalizing Health for All international research program (http://www.globalhealthequity.ca/projects/proj_revitalizing/index.shtml supported 20 research teams located in 15 low- and middle-income countries to explore the strengths and weaknesses of comprehensive primary health care (CPHC initiatives at their local or national levels. Teams were organized in a triad comprised of a senior researcher, a new researcher, and a ‘research user’ from government, health services, or other organizations with the authority or capacity to apply the research findings. Multiple regional and global team capacity-enhancement meetings were organized to refine methods and to discuss and assess cross-case findings. Objective: Most research projects used mixed methods, incorporating analyses of qualitative data (interviews and focus groups, secondary data, and key policy and program documents. Some incorporated historical case study analyses, and a few undertook new surveys. The synthesis of findings in this report was derived through qualitative analysis of final project reports undertaken by three different reviewers. Results: Evidence of comprehensiveness (defined in this research program as efforts to improve equity in access, community empowerment and participation, social and environmental health determinants, and intersectoral action was found in many of the cases. Conclusions: Despite the important contextual differences amongst the different country studies, the similarity of many of their findings, often generated using mixed methods, attests to certain transferable health systems characteristics to create and sustain CPHC practices. These include: 1. Well-trained and supported community health workers (CHWs able to work effectively with marginalized communities 2. Effective mechanisms for community participation, both informal (through participation in projects and programs, and meaningful consultation and formal

Using Agile Project Management to Enhance the Performance of Instructional Design Teams

Science.gov (United States)

Sweeney, David S.; Cifuentes, Lauren

2010-01-01

Instructional design models describe in detail methodologies for designing effective instruction. Several widely adopted models include suggestions for managing instructional design projects. However, these suggestions focus on how to manage the instructional design steps rather than the instructional design and development team process. The…

Implementation of Effective Capstone Projects in Undergraduate Manufacturing Design Engineering Program

Science.gov (United States)

Viswanathan, Shekar

2017-01-01

Final program projects (capstone course) in manufacturing design engineering technology at National University are intensive experiences in critical thinking and analysis, designed to broaden students' perspectives and provide an opportunity for integration of coursework in the area of manufacturing design engineering. This paper focuses on three…

Lay perspectives on lay health worker roles, boundaries and participation within three UK community-based health promotion projects.

Science.gov (United States)

South, J; Kinsella, K; Meah, A

2012-08-01

This paper examines lay interpretations of lay health worker roles within three UK community-based health promotion projects. It argues that understanding lay health worker roles requires critical analysis of the complex interrelationships between professionals, lay workers and the communities receiving a programme. Findings are presented that are drawn from a qualitative study of lay engagement in public health programme delivery where a key objective was to examine the perspectives of community members with the experience of receiving services delivered by lay health workers. Interviews and focus groups were conducted with 46 programme recipients from three case study projects; a breastfeeding peer support service, a walking for health scheme and a neighbourhood health project. The results show how participants interpreted the function and responsibilities of lay health workers and how those roles provided personalized support and facilitated engagement in group activities. Further insights into community participation processes are provided revealing the potential for active engagement in both formal and informal roles. The paper concludes that social relationships are core to understanding lay health worker programmes and therefore analysis needs to take account of the capacity for community members to move within a spectrum of participation defined by increasing responsibility for others.

The design and development of Project Warrior equipment

International Nuclear Information System (INIS)

Thompson, V.R.; Jerram, K.

1987-01-01

The project Warrior standing for welding and repair robot in Oldbury reactors is the culmination of more than 7 years of conceptual thinking, research, development design and manufacture. The tile encompasses the whole project which includes a work performing manipulator, serving manipulator, the manipulators control system and consoles, a welding head and rangefinder with its associated control system and consoles and a large amount of auxiliary equipment. The system at the forefront of today's technology has been manufactured to carry out remote welding in nuclear reactors, on plate with an oxide covering of up to 200 microns

Designing Mobile Health Technology for Bipolar Disorder

DEFF Research Database (Denmark)

Bardram, JE; Frost, Mads; Szántó, Károly

2013-01-01

usefulness of the system was high. Based on this study, the paper discusses three HCI questions related to the design of personal health technologies; how to design for disease awareness and self-treatment, how to ensure adherence to personal health technologies, and the roles of different types...

Industrial Sponsor Perspective on Leveraging Capstone Design Projects to Enhance Their Business

Science.gov (United States)

Weissbach, Robert S.; Snyder, Joseph W.; Evans, Edward R., Jr.; Carucci, James R., Jr.

2017-01-01

Capstone design projects have become commonplace among engineering and engineering technology programs. These projects are valuable tools when assessing students, as they require students to work in teams, communicate effectively, and demonstrate technical competency. The use of industrial sponsors enhances these projects by giving these projects…

The Iodine Satellite (iSat) Project Development Towards Critical Design Review

Science.gov (United States)

Dankanich, John W.; Calvert, Derek; Kamhawi, Hani; Hickman, Tyler; Szabo, James; Byrne, Lawrence

2015-01-01

Despite the prevalence of small satellites in recent years, the systems flown to date have very limited propulsion capability. SmallSats are typically secondary payloads and have significant constraints for volume, mass, and power in addition to limitations on the use of hazardous propellants or stored energy. These constraints limit the options for SmallSat maneuverability. NASA's Space Technology Mission Directorate approved the iodine Satellite flight project for a rapid demonstration of iodine Hall thruster technology in a 12U (cubesat units) configuration under the Small Spacecraft Technology Program. The mission is a partnership between NASA MSFC, NASA GRC, and Busek Co, Inc., with the Air Force supporting the propulsion technology maturation. The team is working towards the critical design review in the final design and fabrication phase of the project. The current design shows positive technical performance margins in all areas. The iSat project is planned for launch readiness in the spring of 2017.

Sources of project financing in health care systems.

Science.gov (United States)

Smith, D G; Wheeler, J R; Rivenson, H L; Reiter, K L

2000-01-01

Through discussions with chief financial officers of leading health care systems, insights are offered on preferences for project financing and development efforts. Data from these same systems provide at least anecdotal evidence in support of pecking-order theory.

Rapid E-learning Development Strategies and a Multimedia Project Design Model

Science.gov (United States)

Sözcü, Ömer Faruk; Ipek, Ismail

2014-01-01

The purpose of the study is to discuss e-learning design strategies which can be used for multimedia projects as a design model. Recent advances in instructional technologies have been found to be very important in the design of training courses by using rapid instructional design (ID) approaches. The approaches were developed to use in training…

Healthy Gaming – Video Game Design to promote Health

Science.gov (United States)

Brox, E.; Fernandez-Luque, L.; Tøllefsen, T.

2011-01-01

Background There is an increasing interest in health games including simulation tools, games for specific conditions, persuasive games to promote a healthy life style or exergames where physical exercise is used to control the game. Objective The objective of the article is to review current literature about available health games and the impact related to game design principles as well as some educational theory aspects. Methods Literature from the big databases and known sites with games for health has been searched to find articles about games for health purposes. The focus has been on educational games, persuasive games and exergames as well as articles describing game design principles. Results The medical objectives can either be a part of the game theme (intrinsic) or be totally dispatched (extrinsic), and particularly persuasive games seem to use extrinsic game design. Peer support is important, but there is only limited research on multiplayer health games. Evaluation of health games can be both medical and technical, and the focus will depend on the game purpose. Conclusion There is still not enough evidence to conclude which design principles work for what purposes since most of the literature in health serious games does not specify design methodologies, but it seems that extrinsic methods work in persuasion. However, when designing health care games it is important to define both the target group and main objective, and then design a game accordingly using sound game design principles, but also utilizing design elements to enhance learning and persuasion. A collaboration with health professionals from an early design stage is necessary both to ensure that the content is valid and to have the game validated from a clinical viewpoint. Patients need to be involved, especially to improve usability. More research should be done on social aspects in health games, both related to learning and persuasion. PMID:23616865

Project Selection in the Design Studio: Absence of Learning Environments

Science.gov (United States)

Basa, Inci

2010-01-01

Project selection is an essential matter of design teaching. Based on observations of a specific curriculum, the author claims that a wide repertoire of subjects including offices, restaurants, hotels, and other public places are used to prepare design students, but that schools and other "learning environments/ schools" are similarly…

Disseminating relevant health information to underserved audiences: implications of the Digital Divide Pilot Projects*

Science.gov (United States)

Kreps, Gary L.

2005-01-01

Objective: This paper examines the influence of the digital divide on disparities in health outcomes for vulnerable populations, identifying implications for medical and public libraries. Method: The paper describes the results of the Digital Divide Pilot Projects demonstration research programs funded by the National Cancer Institute to test new strategies for disseminating relevant health information to underserved and at-risk audiences. Results: The Digital Divide Pilot Projects field-tested innovative systemic strategies for helping underserved populations access and utilize relevant health information to make informed health-related decisions about seeking appropriate health care and support, resisting avoidable and significant health risks, and promoting their own health. Implications: The paper builds on the Digital Divide Pilot Projects by identifying implications for developing health communication strategies that libraries can adopt to provide digital health information to vulnerable populations. PMID:16239960

High-gain capsule design for the HIDIF project

International Nuclear Information System (INIS)

Honrubia, J.J.; Cerrada, J.A.; Gomez, R.

2000-01-01

A high-gain capsule has been designed for the HIDIF project. The goal has been to relax the accelerator requirements by using a radiation pulse with lower peak temperature (220 eV) than previous designs (260 eV). The ablator material is beryllium doped with a very low concentration (0.2 atom %) of copper. The capsule absorbs 1.3 MJ and yields, approximately, 450 MJ in I-D simulations. The effect of the opacity of the ablator on capsule performance has been studied in detail. (authors)

Sampling design for use by the soil decontamination project

International Nuclear Information System (INIS)

Rutherford, D.W.; Stevens, J.R.

1981-01-01

This report proposes a general approach to the problem and discusses sampling of soil to map the contaminated area and to provide samples for characterizaton of soil components and contamination. Basic concepts in sample design are reviewed with reference to environmental transuranic studies. Common designs are reviewed and evaluated for use with specific objectives that might be required by the soil decontamination project. Examples of a hierarchial design pilot study and a combined hierarchial and grid study are proposed for the Rocky Flats 903 pad area

Conceptual design report, plutonium stabilization and handling,project W-460

Energy Technology Data Exchange (ETDEWEB)

Weiss, E.V.

1997-03-06

Project W-460, Plutonium Stabilization and Handling, encompasses procurement and installation of a Stabilization and Packaging System (SPS) to oxidize and package for long term storage remaining plutonium-bearing special nuclear materials currently in inventory at the Plutonium Finishing Plant (PFP), and modification of vault equipment to allow storage of resulting packages of stabilized SNM for up to fifty years. This Conceptual Design Report (CDR) provides conceptual design details for the vault modification, site preparation and site interface with the purchased SPS. Two concepts are described for vault configuration; acceleration of this phase of the project did not allow completion of analysis which would clearly identify a preferred approach.

Planning an integrated agriculture and health program and designing its evaluation: Experience from Western Kenya.

Science.gov (United States)

Cole, Donald C; Levin, Carol; Loechl, Cornelia; Thiele, Graham; Grant, Frederick; Girard, Aimee Webb; Sindi, Kirimi; Low, Jan

2016-06-01

Multi-sectoral programs that involve stakeholders in agriculture, nutrition and health care are essential for responding to nutrition problems such as vitamin A deficiency among pregnant and lactating women and their infants in many poor areas of lower income countries. Yet planning such multi-sectoral programs and designing appropriate evaluations, to respond to different disciplinary cultures of evidence, remain a challenge. We describe the context, program development process, and evaluation design of the Mama SASHA project (Sweetpotato Action for Security and Health in Africa) which promoted production and consumption of a bio-fortified, orange-fleshed sweetpotato (OFSP). In planning the program we drew upon information from needs assessments, stakeholder consultations, and a first round of the implementation evaluation of a pilot project. The multi-disciplinary team worked with partner organizations to develop a program theory of change and an impact pathway which identified aspects of the program that would be monitored and established evaluation methods. Responding to the growing demand for greater rigour in impact evaluations, we carried out quasi-experimental allocation by health facility catchment area, repeat village surveys for assessment of change in intervention and control areas, and longitudinal tracking of individual mother-child pairs. Mid-course corrections in program implementation were informed by program monitoring, regular feedback from implementers and partners' meetings. To assess economic efficiency and provide evidence for scaling we collected data on resources used and project expenses. Managing the multi-sectoral program and the mixed methods evaluation involved bargaining and trade-offs that were deemed essential to respond to the array of stakeholders, program funders and disciplines involved. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Closed and Open Design Projects in the Education of Engineers