WorldWideScience

Sample records for health inspection service

  1. 9 CFR 113.6 - Animal and Plant Health Inspection Service testing.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Animal and Plant Health Inspection Service testing. 113.6 Section 113.6 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION... STANDARD REQUIREMENTS Applicability § 113.6 Animal and Plant Health Inspection Service testing. A...

  2. Health products inspection

    International Nuclear Information System (INIS)

    Stoltz, M.

    2009-01-01

    To protect public health, the Health Products Inspection is a public service mission where the application of regulations concerning activities on human health products and cosmetic products is verified. This mission permits a global approach to assess the health products risk-based benefit and, in monitoring by laboratory testing and by on site inspections, to verify their compliance with appropriate regulations. The seventy five inspectors perform about eight hundred inspections per year, in France and abroad. These inspections are related to data provided in the health products assessment and also to manufacturing and delivery practices. The French inspection body is also involved in the training of foreign inspectors and in the harmonization of national, European and international practices either for operators than for the competent authorities. (author)

  3. Diagnostic efficiency of abattoir meat inspection service in Ethiopia to detect carcasses infected with Mycobacterium bovis: implications for public health.

    Science.gov (United States)

    Biffa, Demelash; Bogale, Asseged; Skjerve, Eystein

    2010-08-06

    public health. Standardization of abattoir inspection protocols (in line with international sanitary requirements), enhanced training and proficiency testing of meat inspections, and raising public awareness are recommended as essential and cost-effective interventions to improve meat inspection service in Ethiopia, with subsequent protection of consumers' health.

  4. In-service inspection techniques

    International Nuclear Information System (INIS)

    Backfisch, W.; Zipser, R.R.

    1980-01-01

    The owner of a nuclear power plant (NPP) is obligated and interested to maintain - by regular maintenance and in-service inspections - the operational safety and availability of the plant for the subsequent operating period in a condition, as is specified as the basis of the erection and the last operational permits. In-service inspections are performed to verify the operational safety, and maintenance work is performed to guarantee the availability. Below, the typical in-service inspections of a light-water reactor NPP (operated on a pressurized-water reactor or on a boiling-water reactor) are described with details and examples of typical inspections, especially of recurrent performance tests of the systems. (orig./RW)

  5. Organization of inspection of radioactive wastes by the public health services

    International Nuclear Information System (INIS)

    Pellerin, P.; Gahinet, M.E.

    1983-01-01

    The liquid and gaseous radio-active wastes produced by nuclear plants are subjected to regulations and strict control by the administration for Public Health. The regulations and the procedures and arrangements which they prescribe are described. The main aspects of the role played by the Central service for protection against ionizing radiation (SCPRI) are presented [fr

  6. 7 CFR 2.80 - Administrator, Animal and Plant Health Inspection Service.

    Science.gov (United States)

    2010-01-01

    ... Meat Inspection Act, as amended, as it pertains to the issuance of certificates of condition of live... U.S.C. 2131-2159). (7) Horse Protection Act (15 U.S.C. 1821-1831). (8) 28 Hour Law, as amended (49 U... following: (i) Solid Waste Disposal Act, as amended by the Resource Conservation and Recovery Act, as...

  7. A web environment for inspection service

    International Nuclear Information System (INIS)

    Robles Guemes, N.; Garcia Heras, M.; Cueto-Felgueroso Garcia, C.; Pelaez Gutierrez, J. A.

    2013-01-01

    The in-service inspection fundamental objective is to maintain the structural integrity of structures, systems and components during the life in the installation service. Nuclear power plants are required to implement a Service inspection program in accordance with the established regulation by the Regulatory body.

  8. In-service inspection and periodic testing

    International Nuclear Information System (INIS)

    Eisele, H.; Meyer, F.A.; Zipser, R.R.

    1981-01-01

    In-service inspections are performed to verify the operational safety, and maintenance work is performed to guarantee the availability. Below, the typical in-service inspections of a light-water reactor NPP (operated on a pressurized-water reactor/PWR/ or on a boiling-water reactor/BWR/) are described with details and examples of typical inspections, especially of recurrent performance tests of the systems. (orig./RW)

  9. In-service inspection and periodic testing

    International Nuclear Information System (INIS)

    Eisele, H.; Meyer, F.A.; Zipser, R.R.

    1980-01-01

    In-service inspections are performed to verify the operational safety, and maintenance work is performed to guarantee the availability. In the present paper, the typical in-service inspections of a light-water reactor NPP (operated on a pressurized-water reactor/PWR/ or on a boiling-water reactor/BWR/) are described with details and examples of typical inspections, especially of recurrent performance tests of the systems. (orig./RW)

  10. Periodic and in-service inspection programs

    International Nuclear Information System (INIS)

    Dinu, M.

    2000-01-01

    Periodic and in-service inspection programs for Cernavoda NPP consists of periodic inspections of CANDU NPP components CSAN N-285.4 and CSAN N-285.4, in-service inspections and repair and modifications general inspection. Periodic inspection program document (PIPD) determines the systems and components subject to inspection, the category of the inspection, techniques, areas and other details.The current status of the inspection programs is presented, including containment , erosion/corrosion, pressure vessel support and snubbers, main steam lines inspection programs. Qualification program in Cernavoda NPP involves equipment qualification in the on-site laboratory, yearly certification, special equipment qualification in the National Institute of Metrology. All procedures are approved by the ISCIR (regulatory body for pressure vessel and lifting equipment) and CNCAN (National Commission on Nuclear Activities Control). Qualification of the personnel is performed according to the ISCIR Technical prescription CR 11/82 for up to 3 year period. Final qualification and licensing is performed by CNCAN

  11. Northeast Inspection Services, Inc. boresonic inspection system evaluation

    International Nuclear Information System (INIS)

    Nottingham, L.D.; Sabourin, P.F.; Presson, J.H.

    1993-04-01

    Turbine rotor reliability and remaining life assessment are continuing concerns to electric utilities. Over the years, boresonic inspection and evaluation have served as primary components in rotor remaining life assessment. Beginning with an evaluation of TREES by EPRI in 1982, a series of reports that document the detection and sizing capabilities of several boresonic systems have been made available. These studies should provide utilities with a better understanding of system performance and lead to improved reliability when predicting rotor remaining life. In 1990, the procedures followed for evaluating rotor boresonic performance capabilities were changed to transfer a greater portion of the data analysis function to the participating vendor. This change from previous policy was instituted so that the evaluation results would better reflect the ''final answer'' that a vendor would provide in a real rotor inspection and also to reduce the cost of an evaluation. Among the first vendors to participate in the new performance demonstration was Northeast Inspection Services, Inc. (NISI). The tests reported herein were conducted by NISI personnel under the guidelines of the new plan. Details of the new evaluation plan are also presented. Rotor bore blocks containing surface-connected fatigue cracks, embedded glass beads, and embedded radial-axial oriented disks were used in the evaluation. Data were collected during twenty-five independent passes through the blocks. The evaluation consisted of statistical characterization of the detection capabilities, flaw sizing and location accuracy, and repeatability of the inspection system. The results of the evaluation are included in this report

  12. 9 CFR 307.5 - Overtime and holiday inspection service.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Overtime and holiday inspection... INSPECTION AND CERTIFICATION FACILITIES FOR INSPECTION § 307.5 Overtime and holiday inspection service. (a..., at the rate specified in § 391.3, for the cost of the inspection service furnished on any holiday as...

  13. Optimizing pre-service inspection data

    International Nuclear Information System (INIS)

    Mullins, L.E.; Harrison, J.M.

    1986-01-01

    The phenomenon of intergranular stress corrosion cracking (IGSCC) in nuclear power plant piping systems has been the single biggest factor in an evolution that has changed and continues to change in-service inspection practices and philosophy throughout the industry. In-service inspection has been found to deal with several distinct phases of the problem. At the onset, existing technology was demonstrated to be unable to detect IGSCC adequately. This inability to detect IGSCC was soon overcome. However, it immediately pointed out the difficulties associated with the discrimination between IGSCC and other harmless metallurgical conditions. On the heels of detection and discrimination came problems associated with determining crack size and the monitoring of overlayed flaws. A wealth of information has been written on all phases of IGSCC; however, one particular aspect has as of yet seen little attention. With an increasing number of plants choosing to replace flawed pipe, the pre-service inspection of the replaced piping demands increased attention. The lessons learned through inspection for IGSCC need again to be applied to the replacement piping. Through increased attention at installation, many of the difficulties associated with proper inservice inspection may be reduced or eliminated, thereby realizing an economy in outage scheduling, personnel exposure, and, overall, a more reliable in-service examination

  14. 9 CFR 590.128 - Holiday inspection service.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Holiday inspection service. 590.128... of Service § 590.128 Holiday inspection service. (a) When an official plant requires inspection service on a holiday or a day designated in lieu of a holiday, such service is considered holiday work...

  15. Designing for in-service inspection

    International Nuclear Information System (INIS)

    Dixit, K.B.

    2002-01-01

    The process of design of components, equipment and systems normally focuses on functional requirements, integrity and environmental conditions. Manufacturing processes, fabricability, inspectability and maintainability in service are considered while designing. Provisions for the requirements of ISI also need to be given due consideration while designing the systems, equipment and components

  16. 9 CFR 381.38 - Overtime and holiday inspection service.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Overtime and holiday inspection... Inspection; Overtime and Holiday Service; Billing Establishments § 381.38 Overtime and holiday inspection... Program, at the rate specified in § 391.3, for the cost of the inspection service furnished on any holiday...

  17. Risk informed In-service Inspection

    International Nuclear Information System (INIS)

    Corak, Z.

    2003-01-01

    Safety of nuclear power plants is one of the most important conditions for their acceptance. Safety is being acheived by numerous methods and techniques in phase of design, manufacturing and maintenance of the nuclear power plants. In-service Inspection (ISI) has a significant role in avoidances of failure in components of nuclear power plants just the same as in assurance of their integrity. Non-destructive examinations are performed periodically in accordance with 10 CFR 50 50.55a and ASME Boiler and Pressure Vessel Code section XI which is referenced by 10 CFR 50.55a. Nondestructive examinations provide information about a current condition of equipment at nuclear power plants and about any damage, defect or degradation mechanism. A lot of effort is often spent in situations in which the probability of failure and their effects on safety have a very low impact. Practical experience shows that failures can often occur at locations where the inspection has never been performed. Costs and expenses of in-service inspections are very high. Therefore, the accent has to be on locations with significant risk to safety. Many years of nuclear power plants' operation and maintenance have resulted in a more broad knowledge of degradation mechanism and the most susceptible locations and huge databases of different nuclear power plants' components. U.S. Nuclear Regulatory Commission (NRC) and the nuclear industry have recognized that probabilistic risk assessment (PRA) has developed and changed to be more useful in improvement of traditional engineering approaches in nuclear power plants regulation. After the publication of its policy statement on the use of PRA in nuclear regulatory activities, the Commission ordered the NRC staff to develop a regulatory framework that incorporated risk insights. The American Society of Mechanical Engineers (ASME) initiated Code Case N-560, N-577, and N-578 that address the importance of categorization and inspection of piping using risk

  18. Pre-service inspection and in-service inspection in Japan

    International Nuclear Information System (INIS)

    Uebayashi, T.; Miyake, Y.

    1985-01-01

    To ensure the safety of nuclear power plant, pre-service inspection/in-service inspection (PSI/ISI) has an important role, and informations obtained from various inspections during plant shut-down period are contributing to establish effective preventive maintenance activities for plant facilities. It might be said that the high level of availability of Japanese light-water nuclear power plants in these two or three years has been achieved by those efforts. In case of Japan, inspections to be carried out during scheduled plant shut-down period are not limited to code requirements but include many other inspections which are mostly reflected from troubles experienced in both domestic and overseas plants. Usually, those additional inspections are performed by Ministry of Trade and Industries' (MITI's) regulator and/or tentative requirement and considered as ISI in broad meaning. To achieve high availability of plant, it is essential to avoid unscheduled shut-down and to shorten inspection period. The developments of new technology to perform effective ISI for operating plants are continued, but on the other hand it is also very important to pay a great consideration to inspectability of the plants at the stage of plant engineering. With the leadership of MITI, improvement and standardization of light-water nuclear power plant has been proceeded and newly constructed plants have great advantage from the point of view on ISI

  19. New Swedish regulations in the area of plant inspection and in-service inspection

    International Nuclear Information System (INIS)

    Hansson, B.

    1998-01-01

    History and present status od Swedish regulations in the field of NPP inspection and in-service inspection are described. The presentation focuses on the development of regulations and establishing new ones. A description of different organisations involved is included

  20. In-service inspections of V-230 reactor

    International Nuclear Information System (INIS)

    Prepechal, J.

    1984-01-01

    It is stated that despite certain constraints the configuration of the WWER-440 is such that it allows to make in-service inspections on a fully satisfactory scale. Three factors are discussed whose existence is necessary for the implementation of in-service inspections. The program defining the scale of inspections is satisfactory with regard to the safety and reliability of reactor operation. Its further development must result in reducing time consumption and radiation burden of personnel. Regulations for the implementation and evaluation of inspections represent the weakest link in the system of in-service inspections. At present, various organizations are dealing with the said problem within international cooperation. Equipment for in-service inspections of WWER-440 reactors is relatively good. The most important knowledge is summed up gained from the ten pre-service and in-service inspections of reactors of this type made so far. (Z.M.)

  1. In-service inspection of pressurized water reactors

    International Nuclear Information System (INIS)

    Rapin, M.; Saglio, R.

    1983-01-01

    French legislation, which is more demanding than in other countries, had led Electricite de France, the State-owned utility, to acquire better performance in-service inspection facilities than those which existed previously. This fact has spurred the industrial development of the new technical facilities which are used worldwide today. This article presents the ''in-service inspection machine'' (MIS) for the inspection of the welds of a PWR vessel, and the inspection device of steam generator tubes; the MIS allow a remote-viewing, ultrasonic and gamma-graphic inspection; Foucault currents are the only one method adapted to the inspection steam generator tubes [fr

  2. Integrated inspection of services for people with learning disabilities in Scotland: the way forward?

    Directory of Open Access Journals (Sweden)

    Martin Campbell

    2007-10-01

    Full Text Available Purpose: The article summarises the process and the results of the first, integrated inspection of managed care services for people with learning disabilities in Scotland. The multi-agency model used was developed to be congruent with the existing performance inspection models, used by single agency inspection. The inspection activities and main outcomes are described, and suggestions are made for improvements. Context of case: In 2006 an inspection model was devised to assess the quality of health, social services and education services for people with learning disabilities in one geographical area of Scotland, as a precursor to a programme of inspections nationally. The first joint, integrated inspection of all services for people with learning disabilities in Scotland took place in June 2006, and the report was published in March 2007. This was the first multi-agency inspection of its kind in the UK, and the first to involve carers and people with learning disabilities on the inspection team. Data sources: A number of data sources were used to check existing practice against agreed Quality Outcome indicators. Primary sources of data were social work records, health records, education records, staff surveys, carer surveys, interviews with staff, family carers and people with learning disabilities, and self evaluations completed by the services being inspected. Eleven different domains, each with sub-indicators were investigated. Case description: This paper summarises the process of an integrated, multi-agency inspection, how the inspection activities were conducted and the main findings of this inspection. Practical improvements to the process are suggested, and these may be of use to other services and inspectorates. Conclusions and discussion: The integrated inspection was a qualified success. Most major objectives were achieved. The sharing of data amongst inspection agencies, establishing the level of commitment to integrated inspection

  3. Joint inspection of services for people with learning disabilities in Scotland: compliance or commitment?

    Directory of Open Access Journals (Sweden)

    Martin Campbell

    2006-10-01

    Full Text Available Purpose: The article describes the development of a practical model of joint, integrated inspection of managed care services for people with learning disabilities in Scotland. The model will give a reliable measure of the impact services are making to people's lives and the quality of service that individuals are actually receiving. Context of case: At present health, social services and education services for people with learning disabilities in Scotland are inspected separately, by up to nine different agencies. The first joint, integrated inspections of all services for people with learning disabilities in Scotland will take place in 2006. This is the first inspection of its kind in the UK, and the first to involve carers and people with learning disabilities on the inspection team. Data sources: Quality Outcome Indicators were developed in 21 different areas, or domains. Evidence based best practice, and evaluative data from previous inspections were the primary sources of data. Case description: This paper reviews the background and rationale for the integrated, joint inspection process. Strengths and constraints of this approach to inspection are discussed, including the crucial importance of commitment from services and from inspectors, rather than mere compliance with demands. Some guidance on how to fully involve staff, carers and services users in the inspection process is given. Conclusions and discussion: The model will produce data to inform decision-making for managers in integrated services and give services users clear information about how well local needs are being met, what areas need development, and what capacity the organisations have to improve. The model of inspection may be of interest to practitioners in a national and international context. The model will be evaluated, following the first joint inspection.

  4. In-service inspection guidelines for composite aerospace structures

    International Nuclear Information System (INIS)

    Heida, Jaap H.; Platenkamp, Derk J.

    2012-01-01

    The in-service inspection of composite aerospace structures is reviewed, using the results of a evaluation of promising, mobile non-destructive inspection (NDI) methods. The evaluation made use of carbon fibre reinforced specimens representative for primary composite aerospace structures, including relevant damage types such as impact damage, delaminations and disbonds. A range of NDI methods were evaluated such as visual inspection, vibration analysis, phased array ultrasonic inspection, shearography and thermography inspection. Important aspects of the evaluation were the capability for defect detection and characterization, portability of equipment, field of view, couplant requirements, speed of inspection, level of training required and the cost of equipment. The paper reviews the damage tolerance design approach for composites, and concludes with guidelines for the in-service inspection of composite aerospace structures.

  5. The new French code for PWR in service inspection

    Energy Technology Data Exchange (ETDEWEB)

    Noel, R; Hutin, J P [Electricite de France (EDF), 75 - Paris (France)

    1988-12-31

    This document presents the new french code for pressured water reactor in service inspection. The historic regulatory basis is presented, together with the new regulatory act (dating back to the 26 february 1974) and the major guidelines of the french practice for in service inspection of PWR components. (TEC).

  6. Enhanced InService Inspection system for BWR plant

    International Nuclear Information System (INIS)

    Shouji, Hajime; Kobayashi, Teruo; Nagao, Tetsuya

    1993-01-01

    An enhanced InService Inspection system (ISI) has been developed, consisting of newly designed automated scanners, automated pipe inspection system and a high speed data acquisition/analysis station. This system uses a trackless magnetic crawler type nozzle inspection scanner attached to the nozzle shoulder by magnetic wheels. The automated pipe inspection system consists of an automated scanner, controller and high speed data acquisition station. These advanced automatic inspection systems are very useful for ISI, especially in reducing the radiation exposure and time required. (author)

  7. Inspection Database

    Data.gov (United States)

    U.S. Department of Health & Human Services — FDA is disclosing the final inspection classification for inspections related to currently marketed FDA-regulated products. The disclosure of this information is not...

  8. In service inspection of superphenix 1 vessels: MIR

    International Nuclear Information System (INIS)

    Asty, M.; Viard, J.; Lerat, B.; Saglio, R.

    1985-02-01

    Presentation of the in-service inspection device, MIR, which has been specially developed for the visual and ultrasonic examination of Super Phenix 1 vessels (surface and internal defects). The inspections take place during fuel handling operations. The inspection device is a robot with a four-wheel drive vehicle which guidance along the welds is achieved by eddy-current devices; visual examination is performed by a television camera and ultrasonic probes are specially resistent to high temperatures

  9. 7 CFR 944.400 - Designated inspection services and procedure for obtaining inspection and certification of...

    Science.gov (United States)

    2010-01-01

    ... Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables... Agricultural Marketing Agreement Act of 1937, as amended. (a) The Federal or Federal-State Inspection Service, Fruit and Vegetable Division, Agricultural Marketing Service, United States Department of Agriculture is...

  10. In-service inspection in the Superphenix 1 vessels interspace

    International Nuclear Information System (INIS)

    Asty, M.; Saglio, R.

    1983-03-01

    The design of Superphenix 1 reactor vessels allows their in-service inspection. A self-propelling engine, the MIR, has been concieved for this need: it can do a visual and ultrasonic inspection. The MIR can move in the whole vessels interspace. The operating conditions are specified and the principle characteristics of the MIR engine are presented [fr

  11. Department of Agriculture, Food Safety and Inspection Service

    Science.gov (United States)

    ... Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District Offices Careers Contact Us Ask ... Reports Fact Sheets Food Defense and Emergency Response Food Safety Education FSIS ... Assistance Contact Centers Cooperative Agreements Email Subscription ...

  12. 77 FR 11437 - Inspection Service Authority; Seizure and Forfeiture

    Science.gov (United States)

    2012-02-27

    ... POSTAL SERVICE 39 CFR Part 233 Inspection Service Authority; Seizure and Forfeiture AGENCY: Postal... Service's rules and regulations regarding the seizure and forfeiture of property into three sections, 39.... The proposed revision consolidates sections 233.8 and 233.9, and treats seizures involving personal...

  13. Surveillance and in-service inspection (SISI) program at FFTF

    International Nuclear Information System (INIS)

    Conrads, T.J.

    1980-01-01

    Assurance of the integrity of the sodium coolant pressure boundaries of the Fast Flux Test Facility systems and components is essential for safe operation. A program has been developed to monitor the integrity of the coolant boundaries and certain plant conditions. Specific equipment and features have been designed into the plant for monitoring. The purpose of SISI is to prevent failures or minimize their consequences through early detection. The program which administers the requirements for monitoring applicable plant conditions whose integrity is necessary to protect public health and safety is known as the Surveillance and In-service Inspection (SISI) Program. The SISI program utilizes a wide range of monitoring techniques to ensure that material degradation or structural deficiencies will not result in the loss of the ability to shut down the reactor, cool the reactor core, or cause the release of radioactive material to the environment

  14. In-service inspection robot for PFBR main vessel- concept

    Energy Technology Data Exchange (ETDEWEB)

    Rajendran, S; Ramakumar, M S [Bhabha Atomic Research Centre, Mumbai (India). Div. of Remote Handling and Robotics

    1994-12-31

    In-service inspection (ISI) of critical components in a nuclear reactor is one of the foremost and important tasks which reveals the state of health of the system, thereby ensuring the safety of the plant, personnel and environment. Prototype Fast Breeder Reactor (PFBR) is designed as a pool type reactor. A safety vessel is provided in the design which envelopes the main reactor vessel. The ISI of the main vessel is mandatory and will be carried out by a robot which will operate on this annular gap. The design of the robot is such that it can crawl around the vessel and into the gap at the bottom of the vessel relying on friction grip. The mobile robot will carry a CCTV camera and the inspection technique packages into the interspace, position and orient these to carry out the ISI of the main vessel. The paper discusses about the design features of the robot including the gripping mechanism and the crawling sequence to perform ISI of the reactor vessel. 3 figs.

  15. In-service inspection robot for PFBR main vessel- concept

    International Nuclear Information System (INIS)

    Rajendran, S.; Ramakumar, M.S.

    1994-01-01

    In-service inspection (ISI) of critical components in a nuclear reactor is one of the foremost and important tasks which reveals the state of health of the system, thereby ensuring the safety of the plant, personnel and environment. Prototype Fast Breeder Reactor (PFBR) is designed as a pool type reactor. A safety vessel is provided in the design which envelopes the main reactor vessel. The ISI of the main vessel is mandatory and will be carried out by a robot which will operate on this annular gap. The design of the robot is such that it can crawl around the vessel and into the gap at the bottom of the vessel relying on friction grip. The mobile robot will carry a CCTV camera and the inspection technique packages into the interspace, position and orient these to carry out the ISI of the main vessel. The paper discusses about the design features of the robot including the gripping mechanism and the crawling sequence to perform ISI of the reactor vessel. 3 figs

  16. The applications of risk-informed in-service-inspection

    International Nuclear Information System (INIS)

    Ting, K.; Ko, T.-H.; Li, Y.-C.; Wu, W.-F.; Lu, Y.-L.; Chien, F.-T.

    2005-01-01

    The US NRC and nuclear industry encouraged the applications of risk-informed In-Service Inspection (RI-ISI) which can be an alternative program to the ASME Section XI In-service Inspection requirements. The Implementation of RI-ISI can improve the substantial cost as well as does reductions. From the aspect of defense in depth for nuclear safety, the achievements of these procedures can identify the inspection rank to promote the integrity of the current inspection program. Thus, this study utilizes this techniques to implement risk assessment on safety class 1 recirculation piping welds where sensitized to IGSCC of Taibei BWR-6 nuclear power plant. In the evaluation process, WinPraise code is used to calculate the failure probabilities of all welds. The result of risk evaluations can be referred to the further regulatory and plant operation. (authors)

  17. Supplementing Public Health Inspection via Social Media

    Science.gov (United States)

    Schomberg, John P.; Haimson, Oliver L.; Hayes, Gillian R.; Anton-Culver, Hoda

    2016-01-01

    Foodborne illness is prevented by inspection and surveillance conducted by health departments across America. Appropriate restaurant behavior is enforced and monitored via public health inspections. However, surveillance coverage provided by state and local health departments is insufficient in preventing the rising number of foodborne illness outbreaks. To address this need for improved surveillance coverage we conducted a supplementary form of public health surveillance using social media data: Yelp.com restaurant reviews in the city of San Francisco. Yelp is a social media site where users post reviews and rate restaurants they have personally visited. Presence of keywords related to health code regulations and foodborne illness symptoms, number of restaurant reviews, number of Yelp stars, and restaurant price range were included in a model predicting a restaurant’s likelihood of health code violation measured by the assigned San Francisco public health code rating. For a list of major health code violations see (S1 Table). We built the predictive model using 71,360 Yelp reviews of restaurants in the San Francisco Bay Area. The predictive model was able to predict health code violations in 78% of the restaurants receiving serious citations in our pilot study of 440 restaurants. Training and validation data sets each pulled data from 220 restaurants in San Francisco. Keyword analysis of free text within Yelp not only improved detection of high-risk restaurants, but it also served to identify specific risk factors related to health code violation. To further validate our model we applied the model generated in our pilot study to Yelp data from 1,542 restaurants in San Francisco. The model achieved 91% sensitivity 74% specificity, area under the receiver operator curve of 98%, and positive predictive value of 29% (given a substandard health code rating prevalence of 10%). When our model was applied to restaurant reviews in New York City we achieved 74

  18. PWR reactor vessel in-service-inspection according to RSEM

    International Nuclear Information System (INIS)

    Algarotti, Marc; Dubois, Philippe; Hernandez, Luc; Landez, Jean Paul

    2006-01-01

    Nuclear services experience Framatome ANP (an AREVA and Siemens company) has designed and constructed 86 Pressurized Water Reactors (PWR) around the world including the three units lately commissioned at Ling Ao in the People's Republic of China and ANGRA 2 in Brazil; the company provided general and specialized outage services supporting numerous outages. Along with the American and German subsidiaries, Framatome ANP Inc. and Framatome ANP GmbH, Framatome ANP is among the world leading nuclear services providers, having experience of over 500 PWR outages on 4 continents, with current involvement in more than 50 PWR outages per year. Framatome ANP's experience in the examinations of reactor components began in the 1970's. Since then, each unit (American, French and German companies) developed automated NDT inspection systems and carried out pre-service and ISI (In-Service Inspections) using a large range of NDT techniques to comply with each utility expectations. These techniques have been validated by the utilities and the safety authorities of the countries where they were implemented. Notably Framatome ANP is fully qualified to provide full scope ISI services to satisfy ASME Section XI requirements, through automated NDE tasks including nozzle inspections, reactor vessel head inspections, steam generator inspections, pressurizer inspections and RPV (Reactor Pressure Vessel) inspections. Intercontrole (Framatome ANP subsidiary dedicated in supporting ISI) is one of the leading NDT companies in the world. Its main activity is devoted to the inspection of the reactor primary circuit in French and foreign PWR Nuclear Power Plants: the reactor vessel, the steam generators, the pressurizer, the reactor internals and reactor coolant system piping. NDT methods mastered by Intercontrole range from ultrasonic testing to eddy current and gamma ray examinations, as well as dye penetrant testing, acoustic monitoring and leak testing. To comply with the high requirements of

  19. 7 CFR 160.66 - Fees for inspection services.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) NAVAL STORES REGULATIONS AND... with the cost of the service rendered. Such fees and charges may be announced to the trade in such...

  20. Advanced Approach of Reactor Pressure Vessel In-service Inspection

    International Nuclear Information System (INIS)

    Matokovic, A.; Picek, E.; Pajnic, M.

    2006-01-01

    The most important task of every utility operating a nuclear power plant is the continuously keeping of the desired safety and reliability level. This is achieved by the performance of numerous inspections of the components, equipment and system of the nuclear power plant in operation and in particular during the scheduled maintenance periods at re-fueling time. Periodic non-destructive in-service inspections provide most relevant criteria of the integrity of primary circuit pressure components. The task is to reliably detect defects and realistically size and characterize them. One of most important and the most extensive examination is a reactor pressure vessel in-service inspection. That inspection demand high standards of technology and quality and continual innovation in the field of non-destructive testing (NDT) advanced technology as well as regarding reactor pressure vessel tool and control systems. A remote underwater contact ultrasonic technique is employed for the examination of the defined sections (reactor welds), whence eddy current method is applied for clad surface examinations. Visual inspection is used for examination of the vessel inner surface. The movement of probes and data positioning are assured by using new reactor pressure vessel tool concept that is fully integrated with NDT systems. The successful performance is attributed thorough pre-outage planning, training and successful performance demonstration qualification of chosen NDT techniques on the specimens with artificial and/or real defects. Furthermore, use of advanced approach of inspection through implementation the state of the art examination equipment significantly reduced the inspection time, radiation exposure to examination personnel, shortening nuclear power plant outage and cutting the total inspection costs. The advanced approach as presented in this paper offer more flexibility of application (non-destructive tests, local grinding action as well as taking of boat samples

  1. Targeted In-service Inspections Using Risk Insights

    International Nuclear Information System (INIS)

    Kulat, S.; Montgomery, B.; Robin Graybeal, M.

    2012-01-01

    This paper includes a discussion of the historical background and rationale for development of a targeted In-service Inspection (ISI) program using risk insights, known as Risk-Informed In-service Inspection (RI-ISI). RI-ISI programs are optimized inspection programs which target specific welds for inspection based upon potential degradation mechanisms and consequences of failure. Inspections are performed on those welds that are the highest contributors to plant risk. Additionally the inspections are tailored to detect the specific postulated degradation mechanisms. As a result, the numbers of inspections are reduced along with the associated cost and radiation exposure, while maintaining or improving the level of quality and safety. Provided in this paper are the basic principles of RI-ISI program development, and a summary of the impact of the implementation of such programs. For example, implementation of a Risk-Informed In-service Inspection program results in a reduction of both cost and radiation exposure. Cost savings are estimated at between USD 1,000,000 and USD 2,300,000 per unit per ten year interval for a Class 1 and2 RI-ISI application. Cost savings are estimated based on average cost per weld of USD 7600 for examination, including the following activities: erection and removal of scaffolding, removal and replacement of insulation, removal and replacement of interferences, weld preparation, examination, documentation, craft support. Reduction in radiation exposure is estimated at 75% to 90% for a Class 1 and2 RI-ISI application. Reduction in radiation exposure is due to the following factors: number of welds selected for examination decreases by 60% to 75%, surface examinations essentially eliminated, within a given risk category, welds can be selected for examination based on additional factors such as the minimization of radiation exposure.(author).

  2. [Legislation and inspection for the health and safety of workers. Efficacy and limits].

    Science.gov (United States)

    Tozzi, G A

    2009-01-01

    To provide information regarding Occupational Health and Safety (OHS) Inspections in Europe. The dynamics that are transforming regulatory subsystems and complementary inspection services are described. Simplification initiatives, the limits and difficulties of applying the different models of Health and Safety Management Systems are discussed. Examples are given on how to evaluate legislation and technical standards during planning and enforcement. Different approaches for studying characteristics, methodologies and efficacy in practice of OHS Inspection are provided. Targeted inspections need to respond to the needs of enterprises and workers. Impartiality must be guaranteed and workers' participation should be facilitated.

  3. Thermographic Inspections And The Residential Conservation Service Program (RCS)

    Science.gov (United States)

    Ward, Ronald J.

    1983-03-01

    Rhode Islanders Saving Energy (RISE) is a non-profit corporation founded in 1977 to provide Rhode Island residents with a variety of energy conservation services. Since January of 1981, it has been performing energy audits in compliance with the Department of Energy's (DOE) Residential Conservation Service Program (RCS). One aspect of the RCS program is the performance of inspections on energy conservation activities completed according to RCS installation guidelines. This paper will describe both the use and results of thermographic inspections within the RISE program. The primary objective of these inspections has been to assure the quality of the building envelope after completion of retrofit measures. Thermal anamolies have been detected that vary in size, location and probable cause. Approximately 37% of all jobs performed through RISE in conjunction with the RCS program have required remedial work as a result of problems that were identi-fied during the thermographic inspection. This percentage was much higher when infra-red inspections were conducted on "Non-RCS" retrofits. Statistics will be presented that provide an interesting insight on the quality of retrofit work when performed in associa-tion with a constant inspection process.

  4. In service inspection of pipes based on risk methods

    International Nuclear Information System (INIS)

    Mendoza G, G.; Viais J, J.; Carmona C, M.

    2006-01-01

    The politics of the Nuclear Regulatory Commission (by its initials in English NRC) of the United States of America on the use of the Probabilistic Safety Analysis (PSA) in activities of nuclear regulation it foments the use of this analysis technique to improve the decisions making, to reduce the unnecessary work in maintenance aspects, inspection and tests and to improve the regulatory efficiency. The inspection programs in service (ISI by its initials in English) developed by the American Society of Mechanical Engineers (by its initials in English ASME) it has been the one primary mechanism to prove the mechanical equipment in plants of nuclear energy, these programs indeed have been carried out in plants of nuclear energy by more of two decades. Their purpose is to identify the conditions, such as indications of cracks that are precursory of flights and ruptures which violate the integrity principles of the pressure frontier. The inspection in service activities include ultrasonic tests, surface tests and penetrating liquids test, also activities that include the scaffolds construction, removal of insulations and welding polishing. The inspections in service every 18 months during the times outside of service are executed. One of the objectives is to lower the costs of the inspections during the times outside of service and to reduce the exposure to the radiation by part of the personnel during these times out for inspections, while it is increased or it maintains the personnel's safety and the reliability. As part of the methodology a pipe segment is selected for which a fault in any point has the same consequences, being calculated the fault probability of the tube using the dimensions of the segment. In this work the inspection in service methodology is applied based on risk to an aspersion system of low pressure of the Laguna Verde Nucleo electric Central. For this system a reduction in the number of welding to inspect of 103 to only 15 is obtained

  5. Laurels for Swiss in-service inspection team

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    Following what is believed to be the first successful application of P-scan ultrasonic testing for the in-service inspection of austenitic welds in the boiling water reactor at Wuergassen (Federal Republic of Germany) last year, Sulzer participated in a 'round robin' test organized by the Electric Power Research Institute in the USA form May to July 1983. (Auth.)

  6. Interaction between periodic in-service inspection requirements and design

    International Nuclear Information System (INIS)

    Prot, A.C.; Saglio, R.

    1979-03-01

    After reviewing the requirements specific of periodic In-Service Inspection related to safety problems, especially for the pressure vessels, and taking into account the experience gained with several PWR reactors, the authors show these requirements could lead to modify the primary circuit design

  7. In-service inspection methods for graphite-epoxy structures on commercial transport aircraft

    Science.gov (United States)

    Phelps, M. L.

    1981-01-01

    In-service inspection methods for graphite-epoxy composite structures on commercial transport aircraft are determined. Graphite/epoxy structures, service incurred defects, current inspection practices and concerns of the airline and manufacturers, and other related information were determind by survey. Based on this information, applicable inspection nondestructive inspection methods are evaluated and inspection techniques determined. Technology is developed primarily in eddy current inspection.

  8. Review of activities relevant to in-service inspection

    International Nuclear Information System (INIS)

    Imanaka, N.

    1980-01-01

    Nuclear power plants are requested to provide continuing safety that cannot compare with other industries, as plant safety is a matter of much concern. To provide continuous assurance for plant safety there is increasing tendency to demand much of inspection of components during the lifetime. This inservice inspection of LMFBRs should be investigated from a view point of different systems and characteristics from LWRs. In this paper a review for inservice inspection of LMFBRs is described. To provide a continuous assurance of safety to the LMFBR, it is essential to develop how to construct the components to maintain the integrity throughout the service lifetime. Especially how to design is urged for this object. In-service inspection should be located only to compensate some uncertainty remained at the design stage, as it is too much complex in practice. As for inspection techniques, leak monitoring is assumed to be a best way to assure the plant safety continuously with the minimum plant outage time and minimum radioactive hazard to the inspectors

  9. In service inspection of SUPERPHENIX 1 vessels: MIR

    International Nuclear Information System (INIS)

    Asty, M.; Viard, J.; Lerat, B.; Saglio, R.

    1985-01-01

    Although no in-service inspection constraints were imposed on the Phenix vessels, the Safety Authorities asked that the design of SUPERPHENIX 1 makes it possible to monitor throughout the lifetime of the reactor, surface and internal defects on the main vessel. A pool design and the presence of heat baffles inside the main vessel make access from the inside of the vessel impossible. Thus, an inspection can only be performed from the outside of the main vessel: the distance between the walls of the main and safety vessels is such that an inspection device can be introduced into the corresponding space. As the design of the reactor precludes radiographic inspection, the method which was selected for monitoring internal defects in the main vessel is ultrasonics. However, the anisotropic structure of austenitic stainless steel welds limits the performance of this technique. The authors present the in-service inspection device, MIR, which has been specially developed for the visual and ultrasonic examination of SUPERPHENIX 1 vessels

  10. In-service inspection of nuclear power plants

    International Nuclear Information System (INIS)

    Asty, M.; Saglio, R.

    1984-10-01

    The French Commissariat a l'Energie Atomique (Atomic Energy Commission) developed two new non destructive control techniques, focused ultrasonics and multi-frequency eddy currents, which have been shown to allow a better detection and characterization of defects. We present here some of the in-service inspection devices which have been designed for field application of these techniques on the PWR reactors built by EDF, inspection devices of the PWR steam generator tubing and the now developing specific device for main tank and helicoidal tubing steam generator of Super-Phenix 1 [fr

  11. Hospital Inspections

    Data.gov (United States)

    U.S. Department of Health & Human Services — Welcome to hospitalinspections.org, a website run by the Association of Health Care Journalists (AHCJ) that aims to make federal hospital inspection reports easier...

  12. Remote controlled ultrasonic pre-service and in-service inspections of reactor pressure vessels

    International Nuclear Information System (INIS)

    Mueller, G.

    1990-01-01

    The first mechanised in-service inspection of the reactor pressure vessel on unit one of Eskom's Koeberg nuclear power station has been carried out. Since 1968 a whole range of manipulators to carry out remote controlled ultrasonic inspections of nuclear power station equipment has been developed. The inspection of a reactor pressure vessel using a central mast manipulator is described. 3 figs., 1 ill

  13. Public knowledge and attitudes regarding public health inspections of restaurants.

    Science.gov (United States)

    Jones, Timothy F; Grimm, Karen

    2008-06-01

    Foodborne diseases cause 76 million illnesses in the U.S. each year, and almost half of all money spent on food is spent in restaurants. Restaurant inspections are a critical public health intervention for the prevention of foodborne disease. A telephone survey of randomly selected Tennessee residents aged > or =18 was performed. Data were collected on respondents' demographics, knowledge, attitudes, and expectations regarding restaurant inspections. Of 2000 respondents, 97% were aware that restaurants are inspected regularly by the health department. More than half of the respondents believed that inspections should be performed at least 12 times per year; only one third were aware that inspections currently occur only twice per year in Tennessee. More than one third of the respondents considered an inspection score of > or =90 acceptable for a restaurant at which they would eat; the mean score in Tennessee is 82. When presented with a variety of scenarios, an overwhelming number of respondents felt that public health responses to safety violations should be far more draconian than they actually are. Survey answers did not differ consistently based on respondents' race, gender, or history of having worked in a restaurant. This study identified a number of public misconceptions and unrealistically high expectations of the public health restaurant-inspection system. It is important to improve consumers' understanding of inspection scores and the limitations of regulatory inspections, as well as the role of such inspections in disease prevention.

  14. In-service inspection of nuclear power plants

    International Nuclear Information System (INIS)

    1991-01-01

    This Manual is intended to provide more comprehensive considerations on the management, organization, preparation, improvement and implementation of in-service inspection activities and the related surveillance. It also gives illustrative examples of good practices and recommendations from operating and other organizations that are consistent with the requirements and recommendations of the Code and Safety Guides. The Manual is directed primarily towards plant management. This Manual should be used in conjunction with the Code and the Safety Guides, in particular with IAEA Safety Series Nos. 50-C-O, 50-SG-O2, 50-SG-05, 50-SG-07, 50-SG-08 and 50-SG-D1, which contain recommendations of a general character about maintenance activities and radiation protection in an operating power plant, and with the 'Manual on the Maintenance of Systems and Components Important to Safety'. This Manual is divided into four technical sections. The first introduces the purpose, structure and main requirements of the programme. The second section describes constituents of the programme, recommending its scope, scheduling, acceptance standards and documentation of results. The following section goes into details of the inspection programme's contents, such as the selection of components, inspection locations, defect types, applicable techniques and procedures, and the evaluation of results. The last section specifies recommended methods and techniques for inspection, such as visual, ultrasonic, eddy current, magnetic particle and others. This main part of the Manual is complemented by a number of annexes which reproduce actual national examples of established procedures, ISI programme parts, acceptance standards, personnel training programmes, testing techniques and other aspects of in-service inspection, illustrating practical implementation of the recommendations of the Manual

  15. 5 CFR 8301.104 - Additional rules for employees of the Food Safety and Inspection Service.

    Science.gov (United States)

    2010-01-01

    ... Food Safety and Inspection Service. 8301.104 Section 8301.104 Administrative Personnel DEPARTMENT OF....104 Additional rules for employees of the Food Safety and Inspection Service. Any employee of the Food Safety and Inspection Service not otherwise required to obtain approval for outside employment under...

  16. 7 CFR 2.53 - Administrator, Food Safety and Inspection Service.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Administrator, Food Safety and Inspection Service. 2... Secretary for Food Safety § 2.53 Administrator, Food Safety and Inspection Service. (a) Delegations... to the Administrator, Food Safety and Inspection Service: (1) Exercise the functions of the Secretary...

  17. Risk informed in-service inspection and testing in Spain

    International Nuclear Information System (INIS)

    Bros, Juan; Marcelles, Ignacio

    2002-01-01

    The Spanish nuclear regulatory authority, the Consejo de Seguridad Nuclear (CSN), requires the use of codes and standards in force in the country of origin of the plant technology. For this reason, the in-service inspection and testing programs applied at Spanish nuclear power plants basically adhere to the requirements of the ASME XI and ASME OM Codes. It is not surprising that when the earliest developments aimed at drawing up risk informed inservice inspection and testing programs were initiated within the framework of ASME, the Spanish industry should follows such developments very closely. In fact, persons within the Spanish nuclear industry joined different ASME committees involved in the development and approval of the various code cases encompassing these developments. Developments specific to the Spanish nuclear power plants were initiated at a time when the aforementioned reference documentation was in a very advanced stage of development/approval. Two clearly differentiated lines of work got under way: On the one hand, and as regards risk informed in-service testing programs, the American standards were used as the sole reference. In the case of risk informed in-service inspection programs, the Spanish nuclear power plant-owning utilities and the Consejo de Seguridad Nuclear decided to draw up a Spanish guideline that, although using the ASME developments as a reference, would have its own specific characteristics. In relation to the above, and referring to the chronology of the events, the activities performed to date in Spain are described

  18. Effect of a Publicly Accessible Disclosure System on Food Safety Inspection Scores in Retail and Food Service Establishments.

    Science.gov (United States)

    Choi, Jihee; Scharff, Robert L

    2017-07-01

    The increased frequency with which people are dining out coupled with an increase in the publicity of foodborne disease outbreaks has led the public to an increased awareness of food safety issues associated with food service establishments. To accommodate consumer needs, local health departments have increasingly publicized food establishments' health inspection scores. The objective of this study was to estimate the effect of the color-coded inspection score disclosure system in place since 2006 in Columbus, OH, by controlling for several confounding factors. This study incorporated cross-sectional time series data from food safety inspections performed from the Columbus Public Health Department. An ordinary least squares regression was used to assess the effect of the new inspection regime. The introduction of the new color-coded food safety inspection disclosure system increased inspection scores for all types of establishments and for most types of inspections, although significant differences were found in the degree of improvement. Overall, scores increased significantly by 1.14 points (of 100 possible). An exception to the positive results was found for inspections in response to foodborne disease complaints. Scores for these inspections declined significantly by 10.2 points. These results should be useful for both food safety researchers and public health decision makers.

  19. The effects of prioritize inspections on occupational health hazards control in workplaces in Iran.

    Science.gov (United States)

    Sadeghi, Fatemah; Bahrami, Abdolrahman; Fatemi, Farin

    2014-01-01

    Iran, a newly industrializing country in Middle East, has a workforce of 25 million people. Most employees are working in agriculture, manufacturing, services, construction, commerce sectors, carpet weaving and mining. This article aims to explore the improvement of occupational harmful agents in workplaces due to implement "prioritize inspections". In 2012, the system of "prioritize inspections "was defined for surveillance on enterprises replace of routine inspection. From this system, the enterprises classified on four groups based on health hazards and enterprises with high risk were under more surveillance. The information about each enterprise was collected by health centers, in five provinces and reported by a recommended form to Centre of Environmental and Occupational Health (CEOH). At this program, the inspections from high and medium hazards were increased in all of provinces. The results showed there was a significant difference between the control of health hazards in before and after beginning of "prioritize inspections"(P=0.048). The control of noise, fumes and providing of proper illumination increased from 8 to 10%, 9 to 9.5%, 12.9 to 15.4%, respectively, at under study provinces in 2012 compared to 2011. The surveillance based on "prioritize inspections" increased the quality of occupational health inspections that causes to prevent occupational health diseases.

  20. Trade in health services.

    Science.gov (United States)

    Chanda, Rupa

    2002-01-01

    In light of the increasing globalization of the health sector, this article examines ways in which health services can be traded, using the mode-wise characterization of trade defined in the General Agreement on Trade in Services. The trade modes include cross- border delivery of health services via physical and electronic means, and cross-border movement of consumers, professionals, and capital. An examination of the positive and negative implications of trade in health services for equity, efficiency, quality, and access to health care indicates that health services trade has brought mixed benefits and that there is a clear role for policy measures to mitigate the adverse consequences and facilitate the gains. Some policy measures and priority areas for action are outlined, including steps to address the "brain drain"; increasing investment in the health sector and prioritizing this investment better; and promoting linkages between private and public health care services to ensure equity. Data collection, measures, and studies on health services trade all need to be improved, to assess better the magnitude and potential implications of this trade. In this context, the potential costs and benefits of trade in health services are shaped by the underlying structural conditions and existing regulatory, policy, and infrastructure in the health sector. Thus, appropriate policies and safeguard measures are required to take advantage of globalization in health services. PMID:11953795

  1. Implementation of in-service inspection program for HANARO

    International Nuclear Information System (INIS)

    Wu, J.S.; Park, Y.C.; Cho, Y.G.; Jun, B.J.

    2001-01-01

    HANARO, a 30 MW multi-purpose research reactor in Korea has been successfully in operation for 6 years since its initial criticality in February 1995. It is mainly used for the research areas including nuclear fuel and material irradiation tests, radioisotope production, neutron beam application, neutron activation analysis and neutron transmutation doping. HANARO was designed to perform for at least 20 years under full power operating condition. It is expected that the actual reactor lifetime will be much more than the design lifetime, due to a safety reassessment based on realistic data, preventive maintenance and appropriate in-service inspections (ISI). Since ageing may affect the overall safety of the reactor facility, it is needed to detect and evaluate the effects on aged components and systems related to safety. During the lifetime of the reactor, structures, systems and components are subjected to environmental conditions of stress, temperature and irradiation that may lead to changes in the material properties and could result in unexpected failures. Evidence of ageing problems appears progressively. A rigorous inspection and visual examination based on a periodic ISI program should be established. It is desirable that the ageing surveillance activities is scheduled as early as possible and continued throughout the operating life of the reactor. An inspection plan for safety related structures, systems and components subjected to the ageing conditions is requested by the regulatory body to assess the safety status of reactor facility. A long-term ISI program for HANARO has been established for safety-related systems and components in the context of the overall reactor ageing management. The objective of this paper is to describe the ISI program and the result of the visual inspection as the first ISI. (orig.)

  2. Study on In-Service Inspection Program and Inspection Technologies for Commercialized Sodium-Cooled Fast Reactor

    International Nuclear Information System (INIS)

    Masato Ando; Shigenobu Kubo; Yoshio Kamishima; Toru Iitsuka

    2006-01-01

    The objective of in-service inspection of a nuclear power plant is to confirm integrity of function of components necessary to safety, and satisfy the needs to protect plant investment and to achieve high plant ability. The sodium-cooled fast reactor, which is designed in the feasibility study on commercialized fast reactor cycle systems in Japan, has two characteristics related to in-service inspection. The first is that all sodium coolant boundary structures have double-wall system. Continuous monitoring of the sodium coolant boundary structures are adopted for inspection. The second characteristic is the steam generator with double-wall-tubes. Volumetric testing is adopted to make sure that one of the tubes can maintain the boundary function in case of the other tube failure. A rational in-service inspection concept was developed taking these features into account. The inspection technologies were developed to implement in-service inspection plan. The under-sodium viewing system consisted of multi ultrasonic scanning transducers, which was used for imaging under-sodium structures. The under-sodium viewing system was mounted on the under-sodium vehicle and delivered to core internals. The prototype of under-sodium viewing system and vehicle were fabricated and performance tests were carried out under water. The laboratory experiments of volumetric testing for double-wall-tubes of steam generator, such as ultrasonic testing and remote-field eddy current testing, were performed and technical feasibility was assessed. (authors)

  3. In service inspection and repair of sodium cooled ASTRID prototype

    Energy Technology Data Exchange (ETDEWEB)

    Baque, F.; Jadot, F. [French Atomic Commission, Cadarache Centre, 13108 Saint Paul lez Durance Cedex, (France); Marlier, R. [AREVA, 10 rue Recamier, 69456 Lyon cedex 06, (France); Saillant, J-F. [AREVA/NDE Solutions, 4 rue Thomas Dumorey, BP 70385, 71109 Chalon sur Saone Cedex, (France); Delalande, V. [EDF R and D, 6, quai Watier, 78400 Chatou, (France)

    2015-07-01

    In the frame of the large R and D work which is performed for the future ASTRID sodium cooled prototype, In Service Inspection and Repair (ISI and R) has been identified as a major issue to be taken into account in order to enlarge the plant safety, to consolidate its availability and to protect the associated investment. After the first part of pre-conceptual design phase (2008-2012), the running second part of pre-conceptual phase (2013-2015) allows to increase the ISI and R tool ability for immersed sodium structures of ASTRID, at about 200 deg. C, on the basis of consolidated specifications and thanks to their qualification through more and more realistic laboratory tests and simulation with CIVA code. ISI and R items are being developed and qualified during a pluri-annual program which mainly deals with the reactor block structures, the primary components and circuit, and the Power Conversion System. It ensures a strong connection between the reactor designers and inspection specialists, as the optimization of inspectability and repairability is looked at: this already induced specific rules for design, in order to shorten and ease the ISI and R operations, which have been merged into RCC-MRx rules. In the frame of increasing technology readiness level with corresponding performance demonstration, this paper presents R and D dealing with the ISI and R items: it highlights the sensor development (both ultrasonic and electromagnetic concepts, compatible with sodium at 200 deg. C), then their applications for ASTRID structure control (under sodium telemetry, imaging and NDE). Activity for repair is also presented (a single laser tool for sodium sweeping, machining and welding), and finally the effort for associated robotic (generic program for ASTRID applications, specific technological tools for sodium medium, tight immersed bell). The main results of testing and simulation are given for telemetry, vision, NDE applications, laser process repair and under sodium

  4. A web environment for inspection service; Un entorno WEB para la inspeccion en servicio

    Energy Technology Data Exchange (ETDEWEB)

    Robles Guemes, N.; Garcia Heras, M.; Cueto-Felgueroso Garcia, C.; Pelaez Gutierrez, J. A.

    2013-07-01

    The in-service inspection fundamental objective is to maintain the structural integrity of structures, systems and components during the life in the installation service. Nuclear power plants are required to implement a Service inspection program in accordance with the established regulation by the Regulatory body.

  5. 78 FR 22151 - Fees for Official Inspection and Official Weighing Services Under the United States Grain...

    Science.gov (United States)

    2013-04-15

    ... Inspection Service (FGIS) with the authority to charge and collect reasonable fees to cover the cost of performing official services. The fees also cover the costs associated with managing the program. After a... associated administrative and supervisory costs. The fees for official inspection and weighing services were...

  6. An overview of in-service inspection for nuclear power plants in Japan

    International Nuclear Information System (INIS)

    Takano, Eishiro

    1996-01-01

    In nuclear power stations, for maintaining the safety of machinery and equipment, it is stipulated to carry out periodic inspection. The contents of the periodic inspection and the inspections of important matters are explained. In-service inspection (ISI) is the nondestructive inspection for confirming the soundness of reactor pressure vessels, main pipings, valves and others. The stipulations on the scope and time of the periodic inspection and ISI, the course of introducing ISI into Japan, and the basic way of thinking on ISI are described. Pre-service inspection (PSI) is carried out for the purpose of collecting and recording the initial data for ISI. The range of the objects of nondestructive inspection and leak test and the range of the objects of leak test only are shown. As to nondestructive inspection, the parts to be inspected, the frequency of inspection and the methods of inspection, and the method of leak test are described. As the present state of inspection technology, the automatic ultrasonic flow detectors for reactor vessels, piping welded parts and reactor vessel stud bolts, and the eddy current flaw detector for steam generator tubes are explained. (K.I.)

  7. [Marketing in health service].

    Science.gov (United States)

    Ameri, Cinzia; Fiorini, Fulvio

    2014-01-01

    The gradual emergence of marketing activities in public health demonstrates an increased interest in this discipline, despite the lack of an adequate and universally recognized theoretical model. For a correct approach to marketing techniques, it is opportune to start from the health service, meant as a service rendered. This leads to the need to analyse the salient features of the services. The former is the intangibility, or rather the ex ante difficulty of making the patient understand the true nature of the performance carried out by the health care worker. Another characteristic of all the services is the extreme importance of the regulator, which means who performs the service (in our case, the health care professional). Indeed the operator is of crucial importance in health care: being one of the key issues, he becomes a part of the service itself. Each service is different because the people who deliver it are different, furthermore there are many variables that can affect the performance. Hence it arises the difficulty in measuring the services quality as well as in establishing reference standards.

  8. Aspects of the Optimization on the In-Service Inspection

    International Nuclear Information System (INIS)

    Korosec, D.; Vojvodic Tuma, J.

    2002-01-01

    In the present paper, the aspects of optimizing In-Service Inspection (ISI) is discussed. Slovenian Nuclear Safety Administration (SNSA) and its authorized organization for the ISI activities, Institute of Metals and Technologies, are actually permanently involved in the ISI processes of the nuclear power plant (NPP) Krsko. Based on the previous experience on the ISI activities, evaluation of the results and review of the new ISI program, the decision was made to improve recent regulatory and professional practice. That means, the conclusion was made to optimize the evaluation process of the ISI as a process. Traditional criteria, standards and practice gives good fundament for the improvements implementation. Improvements can be done on the way that the more broad knowledge about safety important components of the systems shall bee added to the basic practice. It is necessary to identify conditions of the safety important components, such as realistic stress and fatigue conditions, material properties changes due aging processes, the temperature cycling effects, existing flaws characterization in the light of the previous detection and equipment technique used, assessment of the measurement accuracy on the results etc. In addition to the above mentioned, risk assessment and evaluation of the whole ISI shall be done. To do this it is necessary to made risk evaluation, based on previous structural element probability assessment. Probabilistic risk assessment is important and one of the most powerful tools in the ISI optimization. Some basic work on the filed of the risk informed methods related to the nuclear safety components has been already done. Based on reference documentation, the most important steps in risk informed ISI are discussed: scope definition, consequence evaluation, failure probability estimation, risk evaluation, non-destructive examination method selection and possibilities of implementation, monitoring and feedback. Recent experience on the ISI

  9. Examples of in-service inspections and typical maintenance schedule for low-power research reactors

    International Nuclear Information System (INIS)

    Boeck, H.

    1997-01-01

    In-service inspection methods for low-power research reactors are described which have been developed during the past 37 years of the operation of the TRIGA reactor Vienna. Special tools have been developed during this period and their application for maintenance and in-serve inspection is discussed. Two practical in-service inspections at a TRIGA reactor and at a MTR reactor are presented. Further a typical maintenance plan for a TRIGA reactor is listed in the annex. (author)

  10. [Medical services on an inspection ship in the north Atlantic].

    Science.gov (United States)

    Kjaer, A

    1990-10-29

    The Danish Naval Inspection Ships sail in the North Atlantic waters with a doctor on board. The object of this investigation was to illustrate the medical services on board and to elucidate the significance of various factors to predict seeking medical advice. During a period of three months, all of the medical services and certain basic factors were registered. The crew was interviewed about consumption of alcohol and tobacco, previous life at sea and family background. A total of 305 consultations were used by the crew of 72 men. This figure is five times the anticipated figure in general practice. Low rank and low age were predictors for frequent medical consultations. The diagnosis groups of traumata/injuries, dermatological conditions and disease in the nervous system or organs of sense were relatively overrepresented. A series of factors may possibly have influenced the pattern of seeking medical help so that this differs from general practice. It is concluded that the dangerous working environment and poor possibilities for good hygiene are important factors whereas the mental stress is of lesser significance.

  11. 48 CFR 846.470 - Use of commercial organizations for inspections and grading services.

    Science.gov (United States)

    2010-10-01

    ... organizations for inspections and grading services. 846.470 Section 846.470 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 846.470 Use of commercial organizations for inspections and grading services. The contracting...

  12. 9 CFR 352.6 - Denial or withdrawal of inspection service.

    Science.gov (United States)

    2010-01-01

    ... improper means; (4) has knowingly represented that any exotic animal carcass, or exotic animal product, has... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Denial or withdrawal of inspection service. 352.6 Section 352.6 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF...

  13. Health Care Services

    Science.gov (United States)

    Misuse and Addiction Prevention Finance & Management Services Health Care Services Juvenile Justice , 2017 Warning - A phone number that was once used for the Denali KidCare program is now being used to ask people for their credit card number in order to win a prize. The phone number related to this

  14. Improvement of in-service inspection in nuclear power plants

    International Nuclear Information System (INIS)

    2004-07-01

    During the nuclear power plant's (NPPs) operating lifetime, the operating organisation should examine the systems, structures and components (SSCs) for possible deterioration so as to determine whether they are acceptable for continued safe operation or whether remedial measures should be taken. In-service inspection (ISI) provides the systematic framework for these examinations. An effective ISI programme ensures both that the safety of the plant is not adversely affected after the commencement of operation and that the levels of reliability and availability of all plant SSCs remain in accordance with the assumptions and intent of the design and, consequently, a cost effective electricity generation is guaranteed. This report was prepared under one of the IAEA projects, 'Integrated NPP life cycle management including decommissioning'. The main objective of an integrated life cycle management programme is to enable NPPs to compete, without compromising safety, successfully in the changing energy markets throughout their service life and to facilitate life extension and eventual decommissioning through improved engineering, technological, economic and managerial actions. The Technical Working Group on NPP Life Management and other advisory groups nominated by the Member States provide recommendations on high priority needs of Member States in this area. The purpose of this TECDOC is to: discuss and evaluate the status of ISI and its evolution in NPPs of IAEA Member States; discuss and evaluate the criteria for effective ISI and the constitutive elements; discuss and evaluate the implication of the introduction of risk informed ISI (RI-ISI) concepts; generate a common recommendation as to how to benefit from utilising the potential of RI-ISI concepts for further development and, possibly, improvement of ISI effectiveness. The specific concept of this report is to treat the two key issues, i.e. inspection qualification and RI-ISI, and their complementarities, to

  15. School Health Services

    Centers for Disease Control (CDC) Podcasts

    School health services reduce absenteeism and improve academic achievement according to research. If you have school-aged children, you'll want to listen to this podcast to learn more about healthy school environments and the link between health and academic achievement.

  16. Risk informed approach to the in-service inspection activities

    International Nuclear Information System (INIS)

    Korosec, D.; Vojvodic Tuma, J.

    2004-01-01

    In the present paper, the aspects of Risk Informed In-Service Inspection (RI-ISI) are discussed. Slovenian Nuclear Safety Administration (SNSA) and its authorized organization for the ISI activities, Institute of Metals and Technologies (IMT), are actually permanently involved in the ISI processes of the nuclear power plant (NPP) Krsko. Based on the previous experience on the ISI activities, evaluation of the results and review of the existing practice in nuclear world, the activities are started to asses the piping of systems in the light of probability of failure. This is so called Risk Informed approach. By the design established criteria, standards and practice gives good fundaments for the improvements implementation. Improvements can be done on the way that the more broad knowledge about safety important components of the systems shall bee added to the basic practice. It is necessary to identify conditions of the safety important components, such as realistic stress and fatigue conditions, material properties changes due aging processes, the temperature cycling effects, existing flaws characterization in the light of the previous detection and equipment technique used, assessment of the measurement accuracy on the results etc. In addition to this deterministic approach, the principles of risk evaluation methods should be used. NPP Krsko has, as practically majority of NPP's, probabilistic risk assessment (PRA) studies for all safety important systems and components. The methods and results from these studies can be efficiently used to upgrade classical deterministic results, based on which the in-service program as a whole is usually done. In addition to the above mentioned, risk assessment and evaluation of the piping shall be done, which is not covered by the existing PRA analysis. To do this it is necessary to made risk evaluation of the piping segments, based on previous structural element probability assessment. Probabilistic risk assessment is important

  17. Reactor safety through quality assurance and in-service inspection

    International Nuclear Information System (INIS)

    Bush, S.H.

    The quality assurance is discussed of nuclear power plant equipment with respect to the following regulations: section 50 10 CFR - supplement B, section NA-400, ASME - section III and ANSI N-54.2. Quality assurance and reliability are assessed with regard to two aspects: all preoperational functions and all operating stages of the power plant. During the production of nuclear power plant components, increased attention should be devoted to the choice of material, materials testing, production programme and to the production process. During power plant operation, care should be given to periodical in-service inspections which guarantee the plant reliability; defects should immediately be remedied or the power plant shut down. Emphasis is put on the tests of reactor welded joints in compliance with the ASME code. The results of operating tests are used as feedback in the design and testing of the components during production. The probabilities were calculated of the occurrence and elimination of defects during the manufacture and operation of a nuclear reactor. (J.B.)

  18. Crack characterization for in-service inspection planning

    International Nuclear Information System (INIS)

    Waale, J.; Ekstroem, P.

    1995-12-01

    During in-service inspection by non destructive testing the reliability is highly dependent on how the equipment is adjusted to the specific object and to the anticipated crack feature.The crack feature and morphology vary widely between different cracking mechanisms and between material types in which the cracks appear. The major objective of this study was to characterize a number of morphology parameters for common crack mechanism and structure material combinations. Critical morphology parameters are crack orientation, shape, width, surface roughness and branching. The crack parameters were evaluated from failure analyses reported from the nuclear and non-nuclear industry. In addition, a literature review was carried out on crack parameter reports and on failure analysis reports, which were further evaluated. The evaluated crack parameters were plotted and statistically processed in data groups with respect to crack mechanism and material type. The fatigue crack mechanism were classified as mechanical, thermal or corrosion fatigue and stress corrosion crack mechanism as intergranular, transgranular or inter dendritic stress corrosion cracking. Furthermore, some common weld defects were characterized for comparison. The materials were divided into three broad groups, ferritic low alloy steels, stainless steels and nickel base alloys. The results indicate significant differences between crack parameters when comparing data from different crack mechanism/material type combinations. Typical parameter values and scatter were derived for several combinations where the data was sufficient for statistical significance. 10 refs, 105 figs, 14 tabs

  19. Crack characterization for in-service inspection planning

    Energy Technology Data Exchange (ETDEWEB)

    Waale, J [SAQ Inspection Ltd, Stockholm (Sweden); Ekstroem, P [ABB Atom AB, Vaesteraas (Sweden)

    1995-12-01

    During in-service inspection by non destructive testing the reliability is highly dependent on how the equipment is adjusted to the specific object and to the anticipated crack feature.The crack feature and morphology vary widely between different cracking mechanisms and between material types in which the cracks appear. The major objective of this study was to characterize a number of morphology parameters for common crack mechanism and structure material combinations. Critical morphology parameters are crack orientation, shape, width, surface roughness and branching. The crack parameters were evaluated from failure analyses reported from the nuclear and non-nuclear industry. In addition, a literature review was carried out on crack parameter reports and on failure analysis reports, which were further evaluated. The evaluated crack parameters were plotted and statistically processed in data groups with respect to crack mechanism and material type. The fatigue crack mechanism were classified as mechanical, thermal or corrosion fatigue and stress corrosion crack mechanism as intergranular, transgranular or inter dendritic stress corrosion cracking. Furthermore, some common weld defects were characterized for comparison. The materials were divided into three broad groups, ferritic low alloy steels, stainless steels and nickel base alloys. The results indicate significant differences between crack parameters when comparing data from different crack mechanism/material type combinations. Typical parameter values and scatter were derived for several combinations where the data was sufficient for statistical significance. 10 refs, 105 figs, 14 tabs.

  20. Improved in-service inspection program for management of degradation in steam generator tubing

    International Nuclear Information System (INIS)

    Kurtz, R.; Heasler, P.; Muscara, J.

    1992-01-01

    This paper presents an overview of significant results from NRC-sponsored research on steam generator tube integrity and inspection. Burst test results are described along with empirical models to relate flaw geometry and size to tube burst pressure. Results of round robin examinations of a retired-from-service steam generator to determine eddy current inspection reliability are presented. An evaluation and comparison of various sampling plans for in-service inspection of steam generators is discussed. Finally, performance demonstration qualification efforts for eddy current inspection systems are described

  1. Conceptual design of in-service inspection and maintenance for KALIMER

    International Nuclear Information System (INIS)

    Ju, Y. S.; Kim, S. H.; Koo, K. H.; You, B.

    1999-01-01

    In-service inspection and maintenance are very important for the safety and availability of nuclear power plants. The conceptual requirements of in-service inspection and maintenance should be reflected in the earlier design process for the verification of the plant operability and reliability. In this paper the fundamental approaches of the inspection and maintenance for KALIMER are established to ensure the structural integrity and operability for KALIMER. The general strategy and methodology of maintenance and inspection for the reactor system and components are proposed and described for satisfying the intents of the Section XI, Division 3, of ASME code and considering the design characteristics of KALIMER

  2. School Health Services

    Centers for Disease Control (CDC) Podcasts

    2017-09-13

    School health services reduce absenteeism and improve academic achievement according to research. If you have school-aged children, you’ll want to listen to this podcast to learn more about healthy school environments and the link between health and academic achievement.  Created: 9/13/2017 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 9/13/2017.

  3. Scheduling and coordination for in-service inspection of nuclear power plant

    International Nuclear Information System (INIS)

    Li Songbai

    1996-11-01

    Based on the practice and experiences of pre-service and in-service inspections for Daya Bay Nuclear Power Plant (NPP) by Research Institute of Nuclear Power Operation (RINPO) following RSEM code, requirements of utility and actual situation in China, the in-service inspection preparation for organization, techniques and equipment/tooling, materials, personnel and documentation is briefly described. And the scheduling and coordinating consideration for planed in-service inspection activities during NPP outage is emphatically introduced. (2 refs., 4 figs.)

  4. In-service inspection of nuclear power-plant pressure components

    International Nuclear Information System (INIS)

    Lautzenheiser, C.E.

    1976-01-01

    The early light-water-reactor systems for production of commercial power were designed and fabricated in accordance with the codes then being used for fossil-fired power-generating stations with some design changes for increased inspectability during fabrication. Over the past few years, major strides have been made in in-service inspection technology. Work has been under way to determine the reliability of nondestructive testing methods and to develop formal inspection programs throughout the world. The major problems associated with in-service inspection are the scarcity of qualified personnel, the variability in procedures and data recording between inspection agencies, and exposure of inspection personnel to radiation. Further work will be required to more completely mechanize piping inspections to reduce radiation exposure and to standardize inspection procedures, equipment, and certification of personnel. Worldwide attention to the requirements of the American Society of Mechanical Engineers' Boiler and Pressure Vessel Code, the size and integrity of inspection agencies, and efforts such as the development of personnel qualification and certification guides emphasize the importance of in-service inspection to nuclear safety

  5. Franchising reproductive health services.

    Science.gov (United States)

    Stephenson, Rob; Tsui, Amy Ong; Sulzbach, Sara; Bardsley, Phil; Bekele, Getachew; Giday, Tilahun; Ahmed, Rehana; Gopalkrishnan, Gopi; Feyesitan, Bamikale

    2004-12-01

    Networks of franchised health establishments, providing a standardized set of services, are being implemented in developing countries. This article examines associations between franchise membership and family planning and reproductive health outcomes for both the member provider and the client. Regression models are fitted examining associations between franchise membership and family planning and reproductive health outcomes at the service provider and client levels in three settings. Franchising has a positive association with both general and family planning client volumes, and the number of family planning brands available. Similar associations with franchise membership are not found for reproductive health service outcomes. In some settings, client satisfaction is higher at franchised than other types of health establishments, although the association between franchise membership and client outcomes varies across the settings. Franchise membership has apparent benefits for both the provider and the client, providing an opportunity to expand access to reproductive health services, although greater attention is needed to shift the focus from family planning to a broader reproductive health context.

  6. Franchising Reproductive Health Services

    Science.gov (United States)

    Stephenson, Rob; Tsui, Amy Ong; Sulzbach, Sara; Bardsley, Phil; Bekele, Getachew; Giday, Tilahun; Ahmed, Rehana; Gopalkrishnan, Gopi; Feyesitan, Bamikale

    2004-01-01

    Objectives Networks of franchised health establishments, providing a standardized set of services, are being implemented in developing countries. This article examines associations between franchise membership and family planning and reproductive health outcomes for both the member provider and the client. Methods Regression models are fitted examining associations between franchise membership and family planning and reproductive health outcomes at the service provider and client levels in three settings. Results Franchising has a positive association with both general and family planning client volumes, and the number of family planning brands available. Similar associations with franchise membership are not found for reproductive health service outcomes. In some settings, client satisfaction is higher at franchised than other types of health establishments, although the association between franchise membership and client outcomes varies across the settings. Conclusions Franchise membership has apparent benefits for both the provider and the client, providing an opportunity to expand access to reproductive health services, although greater attention is needed to shift the focus from family planning to a broader reproductive health context. PMID:15544644

  7. Occupational health and safety inspection of the Ranger Uranium Mine

    International Nuclear Information System (INIS)

    Rosen, R.

    1987-04-01

    The principal purpose of the inspection was to assess all aspects of occupational health and safety at the Ranger Uranium Mine. A major objective was to identify actual and potential hazards under normal and abnormal conditions, particularly in relation to those topics about which the unions had expressed some concern. An assessment was made of current safety policies, procedures and practices at the site; and, as far as practicable, those tasks which involved risks to workers were identified. The results and recommendations of the inspection are contained in this report

  8. Preventing degradation and in-service inspection of NPP steam generator

    International Nuclear Information System (INIS)

    Ding Xunshen

    1999-01-01

    The author describes the degradation of steam generator tubes in initial operating stage of France NPP. The author emphatically presents the preventive measures to tackle degradation and In-service inspection of Daya Bay NPP 1 unit as a guarantee of safety operation, including secondary side water chemistry monitoring and controlling, leakage rate monitoring, eddy-current inspection, mechanical cleaning, cleanliness inspection, foreign objects removal and etc

  9. Improvement and optimization for in-service inspection of M310 nuclear power station

    International Nuclear Information System (INIS)

    Wang Chen; Sun Haitao; Gao Chen; Deng Dong

    2015-01-01

    In-service inspection (ISI) is an important method to ensure the safety of the mechanical equipment in nuclear power stations. According to the in-service inspection experience feedback from the domestic nuclear power stations, the reasonableness of some provisions in the RSE-M code are discussed and the applications of risk-informed in-service inspection (RI-ISI) are introduced, and the advices for the optimization of the ISI of the domestic M310 nuclear power stations are proposed. (authors)

  10. In-service inspections of the reactor cooling system of pressurized water reactors

    International Nuclear Information System (INIS)

    Fuerste, W.; Hohnerlein, G.; Werden, B.

    1982-01-01

    In order to guarantee constant safety of the components of the reactor cooling system, regular in-service inspections are carried out after commissioning of the nuclear power plant. This contribution is concerned with the components of the reactor cooling system, referring to the legal requirements, safety-related purposes and scope of the in-service inspections during the entire period of operation of a nuclear power plant. Reports are made with respect to type, examination intervals, examination technique, results and future development. The functional tests which are carried out within the scope of the in-service inspections are not part of this contribution. (orig.) [de

  11. 7 CFR 51.42 - Charges for inspection services on a contract basis.

    Science.gov (United States)

    2010-01-01

    .... 51.42 Section 51.42 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 FRESH FRUITS, VEGETABLES AND OTHER PRODUCTS 1,2 (INSPECTION...

  12. 48 CFR 52.246-5 - Inspection of Services-Cost-Reimbursement.

    Science.gov (United States)

    2010-10-01

    ...-Cost-Reimbursement. 52.246-5 Section 52.246-5 Federal Acquisition Regulations System FEDERAL... Provisions and Clauses 52.246-5 Inspection of Services—Cost-Reimbursement. As prescribed in 46.305, insert... furnishing of services, when a cost-reimbursement contract is contemplated: Inspection of Services—Cost...

  13. Study on in-service inspection methods for the above-ground oil tanks floors

    Energy Technology Data Exchange (ETDEWEB)

    Min Xiong; Yewei Kang; Mingchun, Lin; Yi Sun [PetroChina Pipeline R and D Center, Langfang (China)

    2009-07-01

    It is very dangerous to the environment when oil tank floors get corrosion or leak during its long-time service. The traditional inspection methods need to shut down a tank and to empty it, then to clean it in order to inspect the floor. Comparing with the traditional methods, the in-service methods can inspect tank floors rapidly without removing product and opening the tank and can save many costs of tank emptying and cleaning. This paper explores three up-to date in-service inspection methods for the oil tank floors which are acoustic emission technology ultrasonic guided wave technology and mobile robot technology. The theoretic foundation and application status of each method is described. The advantage and disadvantage of each in-service detection technology is concluded. At last some proposals are made. (author)

  14. Quality control and in-service inspection technology for hybrid-composite girder bridges.

    Science.gov (United States)

    2014-08-01

    This report describes efforts to develop quality control tools and in-service inspection technologies for the fabrication and construction of Hybrid Composite Beams (HCBs). HCBs are a new bridge technology currently being evaluated by the Missouri De...

  15. Planning and programming of pre-operational and in-service inspections

    International Nuclear Information System (INIS)

    Udaondo, M.S.

    1984-01-01

    After a brief mention of the actual scope of in-service inspection work, conclusions are presented that relate to the preparations for inspections, making use of experience acquired since 1972 at 11 nuclear power plants in Spain which have commissioned such studies from one particular organization, and analyses are given of the advantages to be gained therefrom. Three different aspects of preparations for inspections are considered: (a) man-hour estimates and the duration of in-service inspections; (b) the sequence of action during a pre-operational inspection (assuming a typical functional organization) from definition of the codes of practice and standards applicable up to the issue of the final report and the schedule for distribution of the annual work load to be invested in a typical project, as a result of combining the two previous estimates, and (c) the documentary aspect of preparations for an inspection during a scheduled outage, as related to the various documents to be drawn up and their contents. Reference is made to the general training to be given to the staff in charge of inspection activities so as to provide them with information on, and a perspective of, the in-service inspection jobs required. (author)

  16. Conceptions of health service robots

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    2015-01-01

    Technology developments create rich opportunities for health service providers to introduce service robots in health care. While the potential benefits of applying robots in health care are extensive, the research into the conceptions of health service robot and its importance for the uptake...... of robotics technology in health care is limited. This article develops a model of the basic conceptions of health service robots that can be used to understand different assumptions and values attached to health care technology in general and health service robots in particular. The article takes...... a discursive approach in order to develop a conceptual framework for understanding the social values of health service robots. First a discursive approach is proposed to develop a typology of conceptions of health service robots. Second, a model identifying four basic conceptions of health service robots...

  17. New developments in containment in-service inspection requirements

    International Nuclear Information System (INIS)

    Staffiera, J.E.

    1995-01-01

    Section 11 of the ASME Boiler and Pressure Vessel Code contains requirements for inservice inspection of nuclear power plant components. Development of ASME Code requirements for containment inservice inspection was begun in 1977, and in 1979 the first such requirements were published in the form of Code Case N-236. Formal inclusion of these requirements in Section 11 of the ASME Code occurred with publication of Subsection IWE, ''Rules for inservice Inspection of Class MC Components of Nuclear Power Plants,'' in the 1980 Edition, Winter 1981 Addenda. At that time, inspection emphasis on nuclear power construction and operation activities was placed on welds and welding processes associated with steel containments and metallic liners of concrete containments. The need for repair-welding requirements was necessitated by containment design modifications for conditions not considered in several original plant designs. Welds in steel containments and metallic liners of concrete containments have not required significant amounts of repair, however, degradation of base metal in containments has become a major concern. Various degradation mechanisms have been identified as potential causes of damage to containment surfaces, including fatigue, corrosion and material embrittlement due to long-term radiation exposure. As a result of these concerns, and in response to comments generated by the Committee to Review Generic Requirements (CRGR) of the NRC in its review of Subsection IWE, emphasis on weld-based inservice inspection was redirected toward a containment-surface inservice inspection program. Significant changes were made to accommodate this re-emphasis. The majority of these changes were published in the 1992 Edition, with the 1992 Addenda, of Subsection IWE. The NRC Proposed Rulemaking was issued for a 75-day public comment period in January, 1994. This period was extended at the request of nuclear industry organizations to allow for meaningful evaluation

  18. 50 CFR 260.97 - Conditions for providing fishery products inspection service at official establishments.

    Science.gov (United States)

    2010-10-01

    ... processed foods and/or components thereof; (10) Furnish and provide laundry service, as required by NMFS... inspection service at official establishments. 260.97 Section 260.97 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE PROCESSED FISHERY...

  19. In service inspection for Superphenix vessels development of ultrasonic techniques available at high temperature

    International Nuclear Information System (INIS)

    Gondard, C.

    1983-12-01

    The main and safety vessels of SUPERPHENIX 1 were designed to allow in-service inspections. The remote controlled inspection device MIR was developped for this purpose. The ultrasonic examination has required the development of all new transducers fitted with severe operating conditions prevailing in intervessels interval. A list of problems to be resolved and technological solutions which were found is given. Measurements of acoustical properties on actual probes are compared with theoretical values. It appears that concordance is good and that an in-service inspection using high temperature transducers is possible with a good spatial resolution and signal to noise ratio

  20. Primary School Inspection: A Supporting Service for Education.

    Science.gov (United States)

    Lyons, Raymond F.; Pritchard, Mervyn W.

    The first section of this summary report is directed to an examination of the nature of the functions of inspection in the six countries examined--Algeria, Nigeria, Pakistan, Peru, Venezuela, and Zambia--and consideration of the content of effective monitoring of and advising on the work of teachers and schools. Conditions that make it possible…

  1. Inspection of Piezoceramic Transducers Used for Structural Health Monitoring

    Directory of Open Access Journals (Sweden)

    Inka Mueller

    2017-01-01

    Full Text Available The use of piezoelectric wafer active sensors (PWAS for structural health monitoring (SHM purposes is state of the art for acousto-ultrasonic-based methods. For system reliability, detailed information about the PWAS itself is necessary. This paper gives an overview on frequent PWAS faults and presents the effects of these faults on the wave propagation, used for active acousto-ultrasonics-based SHM. The analysis of the wave field is based on velocity measurements using a laser Doppler vibrometer (LDV. New and established methods of PWAS inspection are explained in detail, listing advantages and disadvantages. The electro-mechanical impedance spectrum as basis for these methods is discussed for different sensor faults. This way this contribution focuses on a detailed analysis of PWAS and the need of their inspection for an increased reliability of SHM systems.

  2. In-service inspection program for the NCS-80 reactor pressure vessel

    International Nuclear Information System (INIS)

    Scharge, J.; Wehowsky, P.; Zeibig, H.

    1978-01-01

    The in-service inspection program of reactor pressure vessels is mainly based on the ultra-sonic method, visual checking of inner and outer surfaces as well as pressure and leak tests. The test procedure require a design of the pressure vessel suitable for the test methods and the possibility to remove the pressure vessel internals. For the outside inspection a gap of sufficient width is mandatory. The present status of the ultra-sonic method and of the inner and outer manipulators affords to conduct the in-service inspection program in form of automatic checkings. The in-service inspection program for NCS-80, the Nuclear Container-Ship design of 80,000 shp, is integrated in the refueling periods due to the request for a high availability of the ship and reactor plant

  3. Simulating the service life performance of an inspected group of jacket-type structures

    DEFF Research Database (Denmark)

    Schneider, Ronald; Thöns, Sebastian; Rogge, Andreas

    2017-01-01

    and risk. We intend to adopt this approach to optimize inspection, monitoring and repair activities for offshore wind park support structures. As a first step, we simulate – in analogy to an offshore wind park – the service life performance of an inspected group of jacket-type frames. The performance......A novel method for risk-based optimization of inspection and repair strategies for deteriorating structural systems has recently been proposed. The method defines heuristics at the system level to reduce the number of possible strategies. For each defined strategy, it computes the updated system...... failure probability conditional on simulated inspection and repair histories, and evaluates the associated costs and risk. The expected total service life costs and risk for a strategy are finally determined using Monte Carlo simulation. The optimal strategy minimizes the expected total service life costs...

  4. GIMIS - Integral Solution for the In-Service Inspection Management of Components in NPPs

    International Nuclear Information System (INIS)

    Borovic, Damir; Vukovic, Igor

    2014-01-01

    Performance of in-service testing and inspection of components and systems in nuclear power plants are required in order to maintain the nuclear power plant while in operation and to return the plant to service, following plant outages. GIMIS is comprehensive software that integrates all processes, functions and data related to planning, administrating and executing inspections on systems, structures and components in nuclear power plants. The software is designed as a web application developed using the Microsoft ASP.NET technology, database is a Microsoft SQL, and client is composed of JavaScript frameworks. It can be adapted to local language, regulations, and requirements according to the power plant needs. The application consists of seven interdependent modules, namely: components, equipment, personnel, requirements, inspection planning, inspection execution, and reports. GIMIS deals with component, equipment and personnel management (both internally employed and outsourced), also provides full component history including uploaded documentation, drawings, previous inspection results, and supports various types of requirements. It enables scheduling facilitation using component data and compliance requirements, offers generation of all inspection relevant documentation and reports, and covers the equipment management including calibration requirements, certification of equipment and allocation to specific inspections/outages, as well as personnel certifications and allocation to specific inspections/outages. The paper describes the content and functionality of the GIMIS application and provides information of its built-in capabilities and features. (authors)

  5. Increase plant safety and reduce cost by implementing risk-informed in-service inspection programs

    International Nuclear Information System (INIS)

    Billington, A.; Monette, P.

    2001-01-01

    The idea behind the program is that it is possible to 'inspect less, but inspect better'. In other words, the risk-informed In-Service Inspection (ISI) process is used to improve the effectiveness of examination of piping components, i.e. concentrate inspection resources and enhance inspection strategies on high safety significant locations, and reduce inspection requirements on others. The Westinghouse Owners Group (WOG) risk-informed ISI process has already been applied for full scope (Millstone 3, Surry 1) and limited scope (Beznau, Ringhals 4, Asco, Turkey Point 3). By examining the high safety significant piping segments for the different fluid piping systems, the total piping core damage frequency is reduced. In addition, more than 80% of the risk associated with potential pressure boundary failures is addressed with the WOG risk-informed ISI process, while typically less that 50% of this same risk is addressed by the current inspection programs. The risk-informed ISI processes are used to improve the effectiveness of inspecting safety-significant piping components, to reduce inspection requirements on other piping components, to evaluate improvements to plant availability and enhanced safety measures, including reduction of personnel radiation exposure, and to reduce overall Operation and Maintenance (O and M) costs while maintaining regulatory compliance. A description of the process as well as benefits from past projects is presented, since the methodology is applicable for WWER plant design. (author)

  6. Increase plant safety and reduce cost by implementing risk-informed In-Service Inspection programs

    International Nuclear Information System (INIS)

    Billington, A.; Monette, P.; Doumont, C.

    2000-01-01

    The idea behind the program is that it is possible to 'inspect less, but inspect better'. In other words, the risk-informed In-Service Inspection (ISI) process is used to improve the effectiveness of examination of piping components, i.e. concentrate inspection resources and enhance inspection strategies on high safety significant locations, and reduce inspection requirements on others. The Westinghouse Owners Group (WOG) risk-informed ISI process has already been applied for full scope (Millstone 3, Surry 1) and limited scope (Beznau, Ringhals 4, Asco, Turkey Point 3). By examining the high safety significant piping segments for the different fluid piping systems, the total piping core damage frequency is reduced. In addition, more than 80% of the risk associated with potential pressure boundary failures is addressed with the WOG risk-informed ISI process, while typically less than 50% of this same risk is addressed by the current inspection programs. The risk-informed ISI processes are used: to improve the effectiveness of inspecting safety-significant piping components; to reduce inspection requirements on other piping components; to evaluate improvements to plant availability and enhanced safety measures, including reduction of personnel radiation exposure; and to reduce overall Operation and Maintenance (O and M) costs while maintaining regulatory compliance. A description of the process as well as benefits of past projects is presented, since the methodology is applicable for VVER plant design. (author)

  7. An overview of non destructive inspection services in nuclear power plants

    International Nuclear Information System (INIS)

    Farley, S.

    2004-01-01

    Worldwide nuclear power plants are obliged by international and local authorities to perform periodical inspection and maintenance of safety relevant components. Non-Destructive Testing (NDT) techniques such as eddy current, ultrasonic, visual, dye penetrant and radiographic testing have been used and continually developed to inspect a wide range of components and materials. Inspecting such components invariably poses an interesting chal-lenge due to complex component geometries, radiation exposure and the material make-up of the component or its welds. As a leader in services to the nuclear industry, Westinghouse has an immense knowl-edge and experience in inspecting and repairing primary circuit components such as steam generators, reactor vessels, core internals, primary coolant pumps and loops, fuel elements and many other components in hazardous environments. To fulfil the requirements posed by authorities and inspection standards, remotely operated manipulators and vehicles have been designed to bring a diverse variety of probes and cameras to the object of inspection. Each inspection process is tested and qualified by the relevant qualification body. In some cases the results of an inspection may require further in depth analysis or even repair of part of the component. These added challenges have often been met by specifically designed and qualified processes such as for the repair of vessel head penetrations or the re-pair of vessel nozzle safe end welds. This presentation will give a general overview of a range of inspection capabilities and give a few examples in which repair was successfully performed. (author)

  8. Advanced In-Service Inspection Approaches Applied to the Phenix Fast Breeder Reactor

    International Nuclear Information System (INIS)

    Guidez, J.; Martin, L.; Dupraz, R.

    2006-01-01

    The safety upgrading of the Phenix plant undertaken between 1994 and 1997 involved a vast inspection programme of the reactor, the external storage drum and the secondary sodium circuits in order to meet the requirements of the defence-in-depth safety approach. The three lines of defence were analysed for every safety related component: demonstration of the quality of design and construction, appropriate in-service inspection and controlling the consequences of an accident. The in-service reactor block inspection programme consisted in controlling the core support structures and the high-temperature elements. Despite the fact that limited consideration had been given to inspection constraints during the design stage of the reactor in the 1960's, as compared to more recent reactor projects such as the European Fast Reactor (EFR), all the core support line elements were able to be inspected. The three following main operations are described: Ultrasonic inspection of the upper hangers of the main vessel, using small transducers able to withstand temperatures of 130 deg. C, Inspection of the conical shell supporting the core dia-grid. A specific ultrasonic method and a special implementation technique were used to control the under sodium structure welds, located up to several meters away from the scan surface. Remote inspection of the hot pool structures, particularly the core cover plug after partial sodium drainage of the reactor vessel. Other inspections are also summarized: control of secondary sodium circuit piping, intermediate heat exchangers, primary sodium pumps, steam generator units and external storage drum. The pool type reactor concept, developed in France since the 1960's, presents several favourable safety and operational features. The feedback from the Phenix plant also shows real potential for in-service inspection. The design of future generation IV sodium fast reactors will benefit from the experience acquired from the Phenix plant. (authors)

  9. NDT reliability in the organizational context of service inspection companies

    International Nuclear Information System (INIS)

    Holstein, Ralf; Bertovic, Marija; Kanzler, Daniel; Mueller, Christina

    2014-01-01

    The focus of NDT reliability research in the past was in the field of two high risk industries: (atomic) power plants and aircrafts. The responsible organizations have been well aware of the risks and founded projects to understand and optimize critical steps during production, operation and maintenance. But the use of NDT is not limited to these two fields. The risks during operation of chemical plants, trains or windmills are different from the area above but evident. The coverage by legal regulations is relatively low. Instead of this owner responsibility, product liability and financial issues are the driving forces to do inspections and to use non-destructive testing. The different targets and financial issues influence the practice of NDT-inspections. A survey of this practice and its results are shown. (orig.)

  10. In-Service Inspection system for coolant channels of Indian PHWRS - evolution and experience

    International Nuclear Information System (INIS)

    Puri, R.K.; Singh, M.

    2006-01-01

    In-Service Inspection (ISI) is the most important of all periodic monitoring and surveillance activities for assuring the structural integrity of coolant channels in the life extension and management of pressurized heavy water reactors (PHWR-CANDU). Indian PHWRs (220 MWe) are characterized by consists by 306 coolant channels in each unit. These channels have to be inspected for various parameters over the operating life of the reactor. ISI of coolant channels necessitated the indigenous development of an inspection system called BARCIS (BARC Channel Inspection System) at Bhabha Atomic Research Center. BARCIS consists of mainly three parts; drive and control unit, special sealing plug and an inspection head carrying various NDT sensors. Five such systems have been built and deployed at various power plants. The paper deals with the development of the BARCIS system for meeting the ISI requirements of coolant channels, development cycle of this system from its conception to evolution to the present state, challenges, data generated and experience gained (ISI of nearly 900 coolant channels has been completed). Prior to BARCIS, pressure tube gauging equipment for pre-service inspection of coolant tubes was developed in 1980. Moreover a tool for ISI of coolant channels in dry condition was developed in 1990. The paper also describes evolution of various contingency procedures and devices developed over the last one decade. Future plans taking into account technological advancement, changes in the scope of inspection due to design and operating experiences and plant layout will also be covered. The paper describes the efforts put in to develop drive and control mechanism to suit the different vault layouts. The drive mechanism is responsible for linear and rotary movement of the inspection head to carry out 100% volumetric inspection. Special emphasis has been laid on the safety devices required during the inspection activity. Special measures for heavy water retention in

  11. A risk-informed approach to optimising in-service inspection of piping

    International Nuclear Information System (INIS)

    Billington, A.; Monette, P.

    1999-01-01

    Traditional criteria for the selection of in-service inspection locations in piping, have come to be regarded as being out-of-touch with current knowledge of piping failures and with current measures of safety importance. An alternative , risk-informed, method has been developed and successfully licensed, that systematically establishes an inspection plan addressing all safety-related piping systems, in a way that is optimized with respect to the safety gain achieved through in-service inspection. The principles of the method are discussed and the results of several applications are summarized, all of which demonstrate that the risk-informed program would lead to significant improvements in the overall level of plant safety, while at the same time re-distributing the inspections in such a way that reduces both plant costs and radiation exposure to personnel.(author)

  12. Individual health services

    Directory of Open Access Journals (Sweden)

    Schnell-Inderst, Petra

    2011-01-01

    Full Text Available Background: The German statutory health insurance (GKV reimburses all health care services that are deemed sufficient, appropriate, and efficient. According to the German Medical Association (BÄK, individual health services (IGeL are services that are not under liability of the GKV, medically necessary or recommendable or at least justifiable. They have to be explicitly requested by the patient and have to be paid out of pocket. Research questions: The following questions regarding IGeL in the outpatient health care of GKV insurants are addressed in the present report: What is the empirical evidence regarding offers, utilization, practice, acceptance, and the relation between physician and patient, as well as the economic relevance of IGeL? What ethical, social, and legal aspects are related to IGeL? For two of the most common IGeL, the screening for glaucoma and the screening for ovarian and endometrial cancer by vaginal ultrasound (VUS, the following questions are addressed: What is the evidence for the clinical effectiveness? Are there sub-populations for whom screening might be beneficial? Methods: The evaluation is divided into two parts. For the first part a systematic literature review of primary studies and publications concerning ethical, social and legal aspects is performed. In the second part, rapid assessments of the clinical effectiveness for the two examples, glaucoma and VUS screening, are prepared. Therefore, in a first step, HTA-reports and systematic reviews are searched, followed by a search for original studies published after the end of the research period of the most recent HTA-report included. Results: 29 studies were included for the first question. Between 19 and 53% of GKV members receive IGeL offers, of which three-quarters are realised. 16 to 19% of the insurants ask actively for IGeL. Intraocular tension measurement is the most common single IGeL service, accounting for up to 40% of the offers. It is followed by

  13. Individual health services.

    Science.gov (United States)

    Schnell-Inderst, Petra; Hunger, Theresa; Hintringer, Katharina; Schwarzer, Ruth; Seifert-Klauss, Vanadin Regina; Gothe, Holger; Wasem, Jürgen; Siebert, Uwe

    2011-01-01

    The German statutory health insurance (GKV) reimburses all health care services that are deemed sufficient, appropriate, and efficient. According to the German Medical Association (BÄK), individual health services (IGeL) are services that are not under liability of the GKV, medically necessary or recommendable or at least justifiable. They have to be explicitly requested by the patient and have to be paid out of pocket. The following questions regarding IGeL in the outpatient health care of GKV insurants are addressed in the present report: What is the empirical evidence regarding offers, utilization, practice, acceptance, and the relation between physician and patient, as well as the economic relevance of IGeL?What ethical, social, and legal aspects are related to IGeL? FOR TWO OF THE MOST COMMON IGEL, THE SCREENING FOR GLAUCOMA AND THE SCREENING FOR OVARIAN AND ENDOMETRIAL CANCER BY VAGINAL ULTRASOUND (VUS), THE FOLLOWING QUESTIONS ARE ADDRESSED: What is the evidence for the clinical effectiveness?Are there sub-populations for whom screening might be beneficial? The evaluation is divided into two parts. For the first part a systematic literature review of primary studies and publications concerning ethical, social and legal aspects is performed. In the second part, rapid assessments of the clinical effectiveness for the two examples, glaucoma and VUS screening, are prepared. Therefore, in a first step, HTA-reports and systematic reviews are searched, followed by a search for original studies published after the end of the research period of the most recent HTA-report included. 29 studies were included for the first question. Between 19 and 53% of GKV members receive IGeL offers, of which three-quarters are realised. 16 to 19% of the insurants ask actively for IGeL. Intraocular tension measurement is the most common single IGeL service, accounting for up to 40% of the offers. It is followed by ultrasound assessments with up to 25% of the offers. Cancer screening

  14. 78 FR 2627 - Fees for Official Inspection and Official Weighing Services Under the United States Grain...

    Science.gov (United States)

    2013-01-14

    ... authority to charge and collect reasonable fees to cover the cost of performing official services. These fees also cover the costs associated with managing the program. After a financial review of GIPSA's Fees for Official Inspection and Weighing Services, including a comparison of the costs and revenues...

  15. 78 FR 63518 - Uranium Enrichment Fuel Cycle Inspection Reports Regarding Louisiana Energy Services, National...

    Science.gov (United States)

    2013-10-24

    ... NUCLEAR REGULATORY COMMISSION [Docket No. 70-3103; NRC-2010-0264] Uranium Enrichment Fuel Cycle Inspection Reports Regarding Louisiana Energy Services, National Enrichment Facility, Eunice, New Mexico... Louisiana Energy Services (LES), LLC, National Enrichment Facility in Eunice, New Mexico, and has authorized...

  16. 77 FR 18272 - Uranium Enrichment Fuel Cycle Facility Inspection Reports Regarding Louisiana Energy Services LLC...

    Science.gov (United States)

    2012-03-27

    ... NUCLEAR REGULATORY COMMISSION [Docket No. 70-3103; NRC-2010-0264] Uranium Enrichment Fuel Cycle Facility Inspection Reports Regarding Louisiana Energy Services LLC, National Enrichment Facility, Eunice... Louisiana Energy Services (LES), LLC, National enrichment Facility in Eunice, New Mexico, and has verified...

  17. 77 FR 65729 - Uranium Enrichment Fuel Cycle Facility Inspection Reports Regarding Louisiana Energy Services LLC...

    Science.gov (United States)

    2012-10-30

    ... NUCLEAR REGULATORY COMMISSION [Docket No. 70-3103; NRC-2010-0264] Uranium Enrichment Fuel Cycle Facility Inspection Reports Regarding Louisiana Energy Services LLC, National Enrichment Facility, Eunice... Services (LES), LLC, National Enrichment Facility in Eunice, New Mexico, and has verified that cascades...

  18. Risk-informed in-service inspections of nuclear power plants: European activities

    International Nuclear Information System (INIS)

    Simola, K.; Gandossi, L.

    2010-01-01

    Risk-informed in-service inspection (RI-ISI) methods aim at enhancing ISI effectiveness by taking into account the risk importance of possible inspection sites. These methods are widely applied in US, but in Europe the situation is different, as there are many regulatory environments implying a variety of ISI codes and standards and national guidelines. The objective of the European Network for Inspection Qualification, ENIQ, is to co-ordinate and to manage at European level expertise and resources for the qualification of non-destructive inspection techniques and procedures primarily for the in-service inspection of nuclear components. ENIQ has established a Task Group on Risk (TGR) to work towards developing best practice for RI-ISI methodologies. TGR has published a European framework document for risk-informed in-service inspection, and the group has been working at producing more detailed recommended practices and discussion documents on several RI-ISI related issues. In addition, TGR has been active in initiating international projects, such as the JRC-OECD/NEA coordinated RI-ISI benchmark exercise (RISMET). This paper describes the activities and publications of TGR to date, and summarises the contents and main results of the RISMET RI-ISI benchmark exercise. (orig.)

  19. Pre-service baseline inspection using x-probe of Oconee replacement steam generators

    International Nuclear Information System (INIS)

    Addario, M.; Shipp, P.; Davis, K.; Fogal, C.

    2003-01-01

    The eddy current method has been the industry standard for inspecting steam generator tubing for many years and the level of sophistication of coil technology has continued to evolve during that time. State of the art array probe systems now employ multiple sensitivity zones in the probe to better detect and characterize defects in an efficient manner. Owners and regulators of nuclear power plants are interested in the most effective and efficient inspection possible. The ultimate goal has been to meet or exceed new and existing regulatory and design requirements by maximizing the quantity and quality of eddy current data collected while minimizing both the time needed to perform the inspection and the radiation exposure. The X-Probe is an example of this new eddy current array technology. Qualified to detect all types of known defects in steam generator tubing, the technology is comprised of a system of probe, data acquisition instrumentation, computer and human interface software. Recently, Duke Power, along with Babcock and Wilcox Canada and the system developer R/D Tech, collaborated to implement this technology in a first of a kind full scale pre-service inspection of replacement steam generators for Duke Power's Oconee nuclear generating station at Babcock and Wilcox Canada's Cambridge plant. The discussion in this paper will briefly describe the X-Probe technology, describe the system required to perform the inspection, present the general results of the inspection and finally draw some comparative benefit conclusions for both pre-service and in-service applications. (author)

  20. Demonstration test of in-service inspection methods

    International Nuclear Information System (INIS)

    Takumi, Kenji

    1987-01-01

    The major objectives of the project are: (1) to demonstrate the reliability of a manual ultrasonic flaw detector and techniques that are used in operating light water reactor plants and (2) to demonstrate the performance and reliability of an automatic ultrasonic flaw detector that is designed to shorten the time required for ISI work and reduce the exposure risk of inspection personnel. The test project consists of three stages. In the first stage, which ended in 1982, defects were added intentionally to a model structure the same in size as a typical 1.1 million kW BWR plant and manual ultrasonic flaw detection tensting was performed. In the second stage, completed in 1984, automatic eddy-current flaw detection testing was carried out for defects in heat transfer piping of a PWP steam generator. In the third stage, which started in 1981 and ended in March 1987, a newly developed automatic ultrasonic flaw detector is applied to testing of defects used for the manual detector performance evaluation. Results have shown that the automatic eddy-current flaw detector under test has an adequately stable performance for practical uses, with a very high reproducibility to permit close inspection of secular deterioration in heat transfer pipes. It has also revealed that both the manual and automatic ultrasonic flaw detectors under test can detect all defects that do not comply with the ASME standards. (Nogami, K.)

  1. Development of in-service inspection system for core support graphite structures in the high temperature engineering test reactor (HTTR)

    Energy Technology Data Exchange (ETDEWEB)

    Sumita, Junya; Hanawa, Satoshi; Kikuchi, Takayuki; Ishihara, Masahiro [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

    2003-03-01

    Visual inspection of core support graphite structures using TV camera as in-service inspection and measurement of material characteristics using surveillance test specimens are planned in the High Temperature Engineering Test Reactor (HTTR) to confirm structural integrity of the core support graphite structures. For the visual inspection, in-service inspection system developed from September 1996 to June 1998, and pre-service inspection using the system was carried out. As the result of the pre-service inspection, it was validated that high quality of visual inspection with TV camera can be carried out, and also structural integrity of the core support graphite structures at the initial stage of the HTTR operation was confirmed. (author)

  2. Human reliability impact on in-service inspection

    International Nuclear Information System (INIS)

    Spanner, J.C. Sr.

    1986-01-01

    This paper describes a study conducted to identify, characterize, and evaluate the human reliability aspects of ultrasonic testing/inservice inspection (UT/ISI). Recent measurements of UT/ISI system effectiveness have revealed wide variations in performance; suggesting that insufficient emphasis is being placed on the human reliability aspects of nondestructive examination. It appears that NDE performance can be improved through application of the human factors principles relating to the task, training, procedure, environmental, and individual difference variables. These variables are collectively referred to as performance-shaping factors. A man-machine systems model was developed to describe the UT/ISI process using functional task descriptors. The relative operating characteristic (ROC) analysis method, which is derived from signal detection theory, offers unique attributes for analyzing NDT performance. The results of a limited human factors evaluation conducted in conjunction with a mini-round robin test are also described

  3. Steam generator tubes integrity: In-service-inspection

    International Nuclear Information System (INIS)

    Comby, R.J.

    1997-01-01

    The author's approach to tube integrity is in terms of looking for flaws in tubes. The basis for this approach is that no simple rules can be fixed to adopt a universal inspection methodology because of various concepts related to experience, leak acceptance, leak before break approach, etc. Flaw specific management is probably the most reliable approach as a compromise between safety, availability and economic issues. In that case, NDE capabilities have to be in accordance with information required by structural integrity demonstration. The author discusses the types of probes which can be used to search for flaws in addition to the types of flaws which are being sought, with examples of specific analysis experiences. The author also discusses the issue of a reporting level as it relates to avoiding false calls, classifying faults, and allowing for automation in analysis

  4. The role of the United States Food Safety and Inspection Service after the Chernobyl accident

    International Nuclear Information System (INIS)

    Engel, Ronald E.; Randecker, Victor; Johnson, Wesley

    1989-01-01

    The Food Safety and Inspection Service (FSIS) of the United States Department of Agriculture (USDA) inspects domestic and imported meat and poultry food products to assure the public that they are safe, wholesome, not economically adulterated and properly labeled. The Service also monitors the activities of meat and poultry plants and related activities in allied industries, and establishes standards and approves labels for meat and poultry products. As part of its responsibility, shortly after the Chernobyl accident occurred, FSIS developed a plan to assess this accident's impact on domestically produced and imported meat and poultry

  5. The role of the United States Food Safety and Inspection Service after the Chernobyl accident

    Energy Technology Data Exchange (ETDEWEB)

    Engel, Ronald E; Randecker, Victor; Johnson, Wesley [Food Safety and Inspection Service, United States Department of Agriculture (United States)

    1989-09-01

    The Food Safety and Inspection Service (FSIS) of the United States Department of Agriculture (USDA) inspects domestic and imported meat and poultry food products to assure the public that they are safe, wholesome, not economically adulterated and properly labeled. The Service also monitors the activities of meat and poultry plants and related activities in allied industries, and establishes standards and approves labels for meat and poultry products. As part of its responsibility, shortly after the Chernobyl accident occurred, FSIS developed a plan to assess this accident's impact on domestically produced and imported meat and poultry.

  6. Specialists' meeting on in-service inspection and monitoring of LMFBRs. Summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-11-01

    The purpose of the meeting sponsored by the IAEA on the recommendation of the International Working Group on Fast Reactors (IWGFR) was attended by participants from France, the Federal Republic of Germany, Italy, Japan, the Netherlands, United Kingdom, United States of America, and two international organizations: CEC and IAEA. The purpose of the meeting was to review and discuss inspection requirements and concepts developed in the IWGFR member countries, development of inspection methods and their application in practical work and to recommend future development. The technical sessions were divided into four topical sessions as follows: General Concepts for In-Service Inspection of the Reactor Plant; Remotely Controlled Inspection Systems; Ultrasonic Test Methods; Miscellaneous Test Methods.

  7. Specialists' meeting on in-service inspection and monitoring of LMFBRs. Summary report

    International Nuclear Information System (INIS)

    1980-11-01

    The purpose of the meeting sponsored by the IAEA on the recommendation of the International Working Group on Fast Reactors (IWGFR) was attended by participants from France, the Federal Republic of Germany, Italy, Japan, the Netherlands, United Kingdom, United States of America, and two international organizations: CEC and IAEA. The purpose of the meeting was to review and discuss inspection requirements and concepts developed in the IWGFR member countries, development of inspection methods and their application in practical work and to recommend future development. The technical sessions were divided into four topical sessions as follows: General Concepts for In-Service Inspection of the Reactor Plant; Remotely Controlled Inspection Systems; Ultrasonic Test Methods; Miscellaneous Test Methods

  8. Super Phenix 1: In-service inspection of main and safety tanks weldments

    International Nuclear Information System (INIS)

    Asty, M.; Vertut, J.; Argous, J.P.

    1980-01-01

    In Service Inspection of the main tank of the Super Phenix 1 reactor is a new demand compared to Phenix: the authorities have asked that surface and internal defects be detected and their evolution monitored in the future. The presence of thermal baffles inside the main tank precludes the access on that side: the distance between the main and safety tanks takes into account the room needed for an In Service Inspection module. An inspection vehicle is presently under development, which includes ultrasonic examination (focussed probes) and visual examination (TV cameras) capabilities. We briefly describe the techniques that have been selected for ultrasonic testing and also for the vehicle and its guidance between the tanks. (author)

  9. Super Phenix 1: In-service inspection of main and safety tanks weldments

    Energy Technology Data Exchange (ETDEWEB)

    Asty, M [DTech/STA, Centre d' Etudes Nucleaires de Saclay (France); Vertut, J [DPR/STEP, Centre d' Etudes Nucleaires de Saclay (France); Argous, J P [DRNR/STRS, Centre d' Etudes Nucleaires de Cadarache (France)

    1980-11-01

    In Service Inspection of the main tank of the Super Phenix 1 reactor is a new demand compared to Phenix: the authorities have asked that surface and internal defects be detected and their evolution monitored in the future. The presence of thermal baffles inside the main tank precludes the access on that side: the distance between the main and safety tanks takes into account the room needed for an In Service Inspection module. An inspection vehicle is presently under development, which includes ultrasonic examination (focussed probes) and visual examination (TV cameras) capabilities. We briefly describe the techniques that have been selected for ultrasonic testing and also for the vehicle and its guidance between the tanks. (author)

  10. Super Phenix 1: in Service inspection of main and safety tanks weldments

    International Nuclear Information System (INIS)

    Asty, Michel; Vertut, Jean; Argous, J.P.

    1980-05-01

    In service inspection of the main tank of the Super Phenix 1 reactor is a new demand as compared to Phenix: the authorities have asked that surface and internal defects could be detected and their evolution monitored in the future. The presence of thermal baffles inside the main tank precludes the access on that side: the distance between the main and safety tanks takes into account the room needed for an In Service Inspection module. An inspection vehicle is presently under development, which includes ultrasonic examination (focussed probes) and visual examination (TV cameras) capabilities. We briefly describe the techniques that have been selected for ultrasonic testing and also for the vehicle and its guidance between the tanks

  11. In-service inspection for nuclear power plants

    International Nuclear Information System (INIS)

    1980-01-01

    The Safety Guides are recommendations issued by the Agency for use by Member States in the context of their own nuclear safety requirements. Design consideration, in-service examination, test requirements, repair and replacement, equipment, methods and techniques and also administrative aspects are given in this issue

  12. Health care's service fanatics.

    Science.gov (United States)

    Merlino, James I; Raman, Ananth

    2013-05-01

    The Cleveland Clinic has long had a reputation for medical excellence. But in 2009 the CEO acknowledged that patients did not think much of their experience there and decided to act. Since then the Clinic has leaped to the top tier of patient-satisfaction surveys, and it now draws hospital executives from around the world who want to study its practices. The Clinic's journey also holds Lessons for organizations outside health care that must suddenly compete by creating a superior customer experience. The authors, one of whom was critical to steering the hospital's transformation, detail the processes that allowed the Clinic to excel at patient satisfaction without jeopardizing its traditional strengths. Hospital leaders: Publicized the problem internally. Seeing the hospital's dismal service scores shocked employees into recognizing that serious flaws existed. Worked to understand patients' needs. Management commissioned studies to get at the root causes of dissatisfaction. Made everyone a caregiver. An enterprisewide program trained everyone, from physicians to janitors, to put the patient first. Increased employee engagement. The Clinic instituted a "caregiver celebration" program and redoubled other motivational efforts. Established new processes. For example, any patient, for any reason, can now make a same-day appointment with a single call. Set patients' expectations. Printed and online materials educate patients about their stays--before they're admitted. Operating a truly patient-centered organization, the authors conclude, isn't a program; it's a way of life.

  13. health services in South Africa

    African Journals Online (AJOL)

    2013-06-03

    Jun 3, 2013 ... Health programming for men who have sex with men (MSM) in South ... and institutionalised stigma within the public healthcare ... reduction services for MSM who use drugs, or ... Screen and address mental health issues.

  14. Development of data acquisition and processing system for In-service inspection of nuclear power plants

    International Nuclear Information System (INIS)

    Takama, Shinkichi; Kobayashi, Koji; Satoh, Yoshio; Koga, Yoshihiro; Shimizu, Takakazu

    1981-01-01

    In-service inspection (ISI) is required during the plant outage to assure the reliability of the components of a nuclear power plant. IHI has developed the advanced ISI system which consists of remote controlled and mechanized ultrasonic inspection devices for reactor pressure vessel examination, semi-automatic inspection instruments for piping examination with manual scan and automatic recording, data acquisition and processing system with microprocessor and mini-computer. By this system, ISI can be performed fully satisfying the requirement of ASME Code Sec. XI and minimizing operation in the high radioactive areas. All ultrasonic information is processed by the computer and the examination results such as size and location of ultrasonic indication are printed out in the form of sectional and plan view of the part examined, reproduced screen image and polar plot, etc. as well as the evaluation sheet. This system saves the elaborate work of inspection personnel and is expected to contribute to the improvement of inspection quality and to the reduction of radiation exposure of inspection personnel. (author)

  15. Development of Surveillance and In-Service Inspection Programme for Indian Research Reactors Cirus and Dhruva

    International Nuclear Information System (INIS)

    Shukla, D.K.

    2006-01-01

    Many safety requirements for research reactors are quite similar to those of power reactors. For research reactors with a higher hazard potential, the use of safety codes and guides for power reactors is more appropriate. However, there are many important differences between power reactors and research reactors that must be taken into account to ensure that adequate safety margins are available in design and operation of the research reactor. Most research reactors may have small potential for hazard to the public compared to power reactors but may pose a greater potential hazard to the plant operators. The need for greater flexibility in use of research reactors for individual experiments requires a different safety approach. Safety rules for power reactors are required to be substantially modified for application to specific research reactor. Following the intent of the available safety guides for surveillance and In-Service Inspection of Nuclear Power Plants, guidelines were formulated to develop surveillance and In-Service Inspection programme for research reactors Cirus and Dhruva. Based on the specific design of these research reactors, regulatory requirements, the degree of sophistication and experience of the technical organization involved in operating the research reactor, guidelines were evolved for developing and implementing the surveillance and In-Service Inspection programme for research reactors Cirus (40 MWt) and Dhruva (100 MWt) located at Bhabha Atomic Research Centre, Trombay, Mumbai, India. Paper describes the approach adopted for formulation of surveillance and In-service Inspection programme for Dhruva reactor in detail. (author)

  16. 78 FR 23312 - Uranium Enrichment Fuel Cycle Inspection Reports Regarding Louisiana Energy Services, National...

    Science.gov (United States)

    2013-04-18

    ... NUCLEAR REGULATORY COMMISSION [Docket No. 70-3103; NRC-2010-0264] Uranium Enrichment Fuel Cycle Inspection Reports Regarding Louisiana Energy Services, National Enrichment Facility, Eunice, New Mexico..., National Enrichment Facility in Eunice, New Mexico, and has authorized the introduction of uranium...

  17. ASTRID In Service Inspection and Repair: Review of R&D program and associated results

    International Nuclear Information System (INIS)

    Baqué, François; Jadot, Françoise; Bourdais, Florian le; Sibilo, Julien; Augem, Jean-Michel; Gastaldi, Olivier

    2013-01-01

    In Service Inspection & Repair (ISI&R): → range of provisions enabling to verify that the equipments state is in compliance with design criteria; → other range of provisions allowing to characterize an abnormal situation (failure, operation mistake) and to perform necessary actions to reach again an achievable plant configuration

  18. 9 CFR 352.3 - Application by official exotic animal establishment for inspection services.

    Science.gov (United States)

    2010-01-01

    .... (a) Any person desiring to process an exotic animal, exotic animal carcasses, exotic animal meat and... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Application by official exotic animal establishment for inspection services. 352.3 Section 352.3 Animals and Animal Products FOOD SAFETY AND...

  19. 7 CFR 52.83 - Reporting results of the plant survey and inauguration of inspection services.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Reporting results of the plant survey and inauguration... AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES...

  20. [Health services research for the public health service (PHS) and the public health system].

    Science.gov (United States)

    Hollederer, A; Wildner, M

    2015-03-01

    There is a great need for health services research in the public health system and in the German public health service. However, the public health service is underrepresented in health services research in Germany. This has several structural, historical and disciplinary-related reasons. The public health service is characterised by a broad range of activities, high qualification requirements and changing framework conditions. The concept of health services research is similar to that of the public health service and public health system, because it includes the principles of multidisciplinarity, multiprofessionalism and daily routine orientation. This article focuses on a specified system theory based model of health services research for the public health system and public health service. The model is based on established models of the health services research and health system research, which are further developed according to specific requirements of the public health service. It provides a theoretical foundation for health services research on the macro-, meso- and microlevels in public health service and the public health system. Prospects for public health service are seen in the development from "old public health" to "new public health" as well as in the integration of health services research and health system research. There is a significant potential for development in a better linkage between university research and public health service as is the case for the "Pettenkofer School of Public Health Munich". © Georg Thieme Verlag KG Stuttgart · New York.

  1. Case history of a 94 MVA turbo-generator retired after 190.000 hours of service by defects revealed by boresonic in-service inspection

    International Nuclear Information System (INIS)

    Porro, F.; Santoro, M.

    1990-01-01

    The case-history of a turbogenerator manufactured by Ansaldo on 1957 and turned on operation on 1958 then retired after 30 years of operation, with a total of 190.000 hours of service, by defects revealed trough boresonic inspections, will be presented. The rotor was inspected a first time after 130.000 hours of service and was overbored in order to allow further service operations. After other 60.000 hours of service operation the rotor underwent to a new in-service inspection that showed an unacceptable condition. The rotor, retired from service, has been destined to destructive tests in order to verify non-destructive predictions

  2. [Terrorism, public health and health services].

    Science.gov (United States)

    Arcos González, Pedro; Castro Delgado, Rafael; Cuartas Alvarez, Tatiana; Pérez-Berrocal Alonso, Jorge

    2009-01-01

    Today the terrorism is a problem of global distribution and increasing interest for the international public health. The terrorism related violence affects the public health and the health care services in an important way and in different scopes, among them, increase mortality, morbidity and disability, generates a context of fear and anxiety that makes the psychopathological diseases very frequent, seriously alters the operation of the health care services and produces important social, political and economic damages. These effects are, in addition, especially intense when the phenomenon takes place on a chronic way in a community. The objective of this paper is to examine the relation between terrorism and public health, focusing on its effects on public health and the health care services, as well as to examine the possible frames to face the terrorism as a public health concern, with special reference to the situation in Spain. To face this problem, both the public health systems and the health care services, would have to especially adapt their approaches and operational methods in six high-priority areas related to: (1) the coordination between the different health and non health emergency response agencies; (2) the reinforcement of the epidemiological surveillance systems; (3) the improvement of the capacities of the public health laboratories and response emergency care systems to specific types of terrorism as the chemical or biological terrorism; (3) the mental health services; (4) the planning and coordination of the emergency response of the health services; (5) the relations with the population and mass media and, finally; (6) a greater transparency in the diffusion of the information and a greater degree of analysis of the carried out health actions in the scope of the emergency response.

  3. MIR: an in-service inspection device for Superphenix 1 vessels

    International Nuclear Information System (INIS)

    Asty, M.; Ceccato, S.; Lerat, B.; Viard, J.

    1986-06-01

    The main and safety vessels of SUPERPHENIX 1 were designed to allow in-service inspections. The remote controlled inspection device MIR was developed for this purpose. It allows both visual and ultrasonic examinations to be performed. Basically, MIR consists of a tetrahedral structure provided with four steering and traction wheels, two for each vessel. A computer assisted control system enables it to be driven to any position on either the main or safety vessels. Operating conditions are briefly reviewed and the main features of MIR presented

  4. Experience on implementing risk-oriented in-service inspection at NPP in USA

    International Nuclear Information System (INIS)

    Grebenyuk, Yu.P.; Zaritskij, N.S.; Kovyrshin, V.G.; Kostenko, S.P.

    2001-01-01

    Experience of implementing risk-oriented in-service inspection (RIISI) of pipelines at the US NPP analyzed. RIISI processes according to the methodologies developed by Westinghouse and EPRI are described and compared. The information is addressed concerning practical matters of RIISI implementing at NPP Beaver Valley and Arkansas Nuclear One. Regulatory activity of the US NRC while implementing NRC at the US NPP. It is shown that using RIISI at NPP is aimed at improvement of examination efficiency, decreasing costs and occupational dose loads while inspecting pipelines

  5. Review of In-Service Inspection and Repair Technique Developments for French Liquid Metal Fast Reactors

    International Nuclear Information System (INIS)

    Baque, F.

    2005-01-01

    In-service monitoring of nuclear plants is indispensable for both the Operator and the Regulator. The notion of in-service monitoring ranges from the continuous monitoring of the reactor in operation to the thorough in-service reactor inspection during programmed shutdowns. However, the highly specific environment found in French liquid metal fast reactor plants - Phenix and Superphenix - makes monitoring and inspection complicated because of the use of a sodium coolant that is hot, opaque, and difficult to drain.The Commissariat a l'Energie Atomique, in collaboration with its traditional French partners, Electricite de France utilities and FRAMATOME/Novatome Engineering, decided to conduct a 6-yr research and development program (1994-2000) to explore this problem vis-a-vis Superphenix, as well as the possibilities of intervening within the reactor block or on components in a sodium environment. Furthermore, the safety reevaluation of Phenix, conducted between 1994 and 2003, represented an excellent 'test bench' during which the limits of inspection processes - applied to an integrated reactor concept - were surpassed using techniques such as fuel subassembly head scanning, ultrasonic examination of the core support, and visual inspection of the cover-gas plenum following a partial sodium draining. Repair techniques were investigated for cleaning of sodium wet structure surfaces, cutting of damaged parts, and welding in sodium aerosol atmosphere. Both conventional and laser processes were tested

  6. Health Coordination Manual. Head Start Health Services.

    Science.gov (United States)

    Administration for Children, Youth, and Families (DHHS), Washington, DC. Head Start Bureau.

    Part 1 of this manual on coordinating health care services for Head Start children provides an overview of what Head Start health staff should do to meet the medical, mental health, nutritional, and/or dental needs of Head Start children, staff, and family members. Offering examples, lists, action steps, and charts for clarification, part 2…

  7. QUALITY MANAGEMENT IN EDUCATIONAL INSPECTION SERVICES: ADAPTATION TO THE EFQM EXCELLENCE MODEL

    Directory of Open Access Journals (Sweden)

    Alberto José Hontañón Talledo

    2014-12-01

    Full Text Available The main purpose of this project work is to facilitate reflection on the incorporation of rigurous data gathering oriented to the decision making in order to improve the procedure carried out by the Educational Inspection Services, its operation and its results. By my understanding, due to their direct connection with the improvement in teaching practice, this improvement will thereupon result in significant benefits to education, the educational system and society itself. Throughout the project work, an approach to quality management is applied to improve the impact of the actions carried out by the Educational Inspection Services and a practical proposal, which sets out to encourage reflection in order to bent on change, is achieved together with a continuous improvement in the school supervision services themselves.

  8. Research and development on in-service inspection system for reactor vessel of FBR's

    International Nuclear Information System (INIS)

    Rindo, Hiroshi; Mitabe, Noriaki; Ara, Kuniaki; Nagai, Keiichi; Otaka, Masahiko

    1993-01-01

    In-Service Inspection (ISI) is required for main components and piping of FBRs. Visual test and volumetric examination of the reactor vessel (RV) from the outer surface are to be performed under severe conditions such as limited space, high temperature and high gamma dose rate during the reactor shutdown. Therefore, ISI should be performed by using a remote operation system, and the ISI system should be very compact. PNC has been developing the ISI system to apply to the RV inspection. Verification and performance tests of ISI system were carried out by use of the RV test model. This paper describes the system structure, system verification tests including operation and controlling the inspection robot, the functions of the visual test and the volumetric examination under the high temperature

  9. Beliefs concerning the reliability of nuclear power plant in-service inspections

    International Nuclear Information System (INIS)

    Kettunen, J.

    1997-01-01

    The aim of the study was to investigate belief systems held by the officials responsible for the planning and supervision of NDT operations within the Finnish nuclear industry. They were asked to express their opinions on (1) the reliability of NDT methods in general, (2) the factors influencing the reliability of in-service inspections, and (3) the degree of reliability of the current inspections operations conducted by means of NDT methods in the Finnish nuclear power plants. Another goal of the study was to assess the adequacy of officials' beliefs (or belief systems). The research data was collected by interviewing representatives from Finnish power companies (Imatran Voima Oy and Teollisuuden Voima Oy), independent inspection organisations, and the Finnish Centre for Radiation and Nuclear Safety (STUK). The adequacy of the beliefs expressed was assessed by means of the results obtained from international NDT reliability studies and on the basis of interviewees' own justification. (refs.)

  10. 29 CFR 1960.25 - Qualifications of safety and health inspectors and agency inspections.

    Science.gov (United States)

    2010-07-01

    ... conditions affecting employee safety and health, coordination of inspection functions is encouraged. ... HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE... shall be conducted by inspectors qualified to recognize and evaluate hazards of the working environment...

  11. Experience with the WWER-440 MW reactor pressure vessel in-service inspections and evaluation of their results

    International Nuclear Information System (INIS)

    Brumovsky, M.; Kralovec, J.; Prepechal, J.; Sulc, J.

    1989-01-01

    The Power Machinery Plant of Skoda Works in Plzen carries out in-service inspections of WWER-440 MW reactor pressure vessels by means of remote controlled inspection equipment - the TRC reactor test system, and some other inspections devices. The results of the in-service inspections were evaluated by methods based on the fracture mechanics approach, the knowledge of stress and strain distribution, and the operating history of the pressure vessels. Examples of types of defects found and their analysis are shown. (author). 1 tab

  12. 7 CFR 301.87-7 - Assembly and inspection of regulated articles.

    Science.gov (United States)

    2010-01-01

    ... Animal and Plant Health Inspection Service, Plant Protection and Quarantine, Domestic and Emergency... regulated article. 8 Inspectors are assigned to local offices of Plant Protection and Quarantine, which are... PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE DOMESTIC QUARANTINE NOTICES Sugarcane...

  13. In-service inspection as an aid to steel pressure vessel reliability

    International Nuclear Information System (INIS)

    Nichols, R.W.

    1975-01-01

    In-service inspection has played an important role in non-nuclear pressure vessel technology, being a legal requirement in many countries. Evidence from surveys of reliability of non-nuclear plant has suggested that such inspections can be effective in reducing the risk of subsequent failures. Recent requirements of the ASME XI code which will be summarised have important implications on the techniques to be used for in-service inspection, and so on design and fabrication aspects. Moreover, in-service inspection can only be an effective procedure if its possible weaknesses are recognised. The first problem is to ensure that an ultrasonic technique is used which is capable of detecting defects of an order of magnitude smaller than the critical size for each particular situation, in whatever defect orientation is important. The potential of different ultrasonic techniques will be compared. Next it is necessary to ensure coverage of all the relevant material. In this respect machine operation is superior to manual scanning, so that manipulation and scanning devices have to be developed. Problems of local geometry and of deviations in geometry have to be discussed with designer and fabricator; plate and clad quality have to be controlled (with respect to surface contour, metallurgical condition and freedom from interfering defects) to ensure inspectability in depth. The reliability of the mechanical and electronic equipment has to be assessed and designed to meet high requirements. Some presentational aids to detection and interpretation will be discussed. Having located a potential defect, the application of fracture mechanics treatments requires knowledge of size, shape and orientation. Some of the problems will be discussed together with possible solutions. (author)

  14. Qualification of UT methods and systems used for in-service inspections of VVER 440 vessels

    International Nuclear Information System (INIS)

    Skala, Z.; Vit, J.

    2003-01-01

    SKODA JS has been performing automated in-service inspections VVER reactor pressure vessels for more than twenty years. All of these inspections were performed by ultrasonic pulse echo method, combined from 1996 with eddy current testing. The Time of Flight Diffraction Method (TOFD) is one of modern methods of ultrasonic testing. The accuracy of sizing the through wall extent of a flaw by TOFD is much better than the accuracy achievable by the pulse echo method. A series of laboratory tests were performed by SKODA JS and confirmed the suitability of TOFD method for VVER reactor parts testing. The Czech Atomic law demands the qualification of systems and methods used for the in-service inspections of nuclear reactors. The qualification is done in accordance with ENIQ methodology and consists of preparation of the Technical Justification and practical tests made under the surveillance of Qualification Body. SKODA JS intends to qualify systems and methods used for the automated ultrasonic testing of VVER 440 and VVER 1000 reactor components from the inner as well as from the outer surface. The accuracy of the flaw through wall extent sizing by TOFD was confirmed by the qualification of methods and systems used for the testing of VVER 440 vessel circumferential weld and so the TOFD method shall be used routinely by SKODA JS for the inspection of vessel circumferential welds root area and for sizing of flaws exceeding the acceptance level. (author)

  15. Wireless Roadside Inspection Phase II Tennessee Commercial Mobile Radio Services Pilot Test Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Franzese, Oscar [ORNL; Lascurain, Mary Beth [ORNL; Capps, Gary J [ORNL; Siekmann, Adam [ORNL

    2011-05-01

    The Federal Motor Carrier Safety Administration (FMCSA) Wireless Roadside Inspection (WRI) Program is researching the feasibility and value of electronically assessing truck and bus driver and vehicle safety at least 25 times more often than is possible using only roadside physical inspections. The WRI program is evaluating the potential benefits to both the motor carrier industry and to government. These potential benefits include reduction in accidents, fatalities and injuries on our highways and keeping safe and legal drivers and vehicles moving on the highways. WRI Pilot tests were conducted to prototype, test and demonstrate the feasibility and benefits of electronically collecting safety data message sets from in-service commercial vehicles and performing wireless roadside inspections using three different communication methods. This report summarizes the design, conduct and results of the Tennessee CMRS WRI Pilot Test. The purpose of this Pilot test was to demonstrate the implementation of commercial mobile radio services to electronically request and collect safety data message sets from a limited number of commercial vehicles operating in Tennessee. The results of this test have been used in conjunction with the results of the complimentary pilot tests to support an overall assessment of the feasibility and benefits of WRI in enhancing motor carrier safety (reduction in accidents) due to increased compliance (change in motor carrier and driver behavior) caused by conducting frequent safety inspections electronically, at highway speeds, without delay or need to divert into a weigh station

  16. Malawi's Mental Health Service

    African Journals Online (AJOL)

    ual, the child running off into the bush, the adoles- cent who almost unnoticed begins to lose concentration and fail at his studies. ... Malawi Medical Journal. .... topic. In this way the specialist service comes out to the district, rather than all those ...

  17. IAEA-RCA training course on in-service inspection of research reactors

    International Nuclear Information System (INIS)

    2002-01-01

    Bhabha Atomic Research Centre (BARC) has acquired a wide range of experience for over four decades in design, construction, operation and maintenance of research reactors. The two-week training course on In-Service Inspection of Research Reactors (ISI) has greatly increased the awareness in the field of ISI of Research Reactors. The training course has been formulated so as to cover most of the topics relevant to ISI of research reactors. Important topics such as rationale for in-service inspection, material degradation mechanisms, non-destructive examination techniques, design evaluation of flaws and radiological, codal and regulatory aspects of ISI for research reactors were covered. Lectures on ISI of elastomeric materials and concrete structures, which are generally used in the construction of reactors have also been included in the course. Papers relevant to INIS are indexed separately

  18. Health services in Indonesia.

    Science.gov (United States)

    Kosen, S; Gunawan, S

    In Indonesia, rapid economic development has led to a reduction in poverty among the 195 million inhabitants. While population increased more than 50% from 1971 to 1990, the annual growth rate, crude birth rate, and total fertility rates have declined rapidly. Life expectancy has increased from 45.7 years in 1971 to 62.7 in 1994 as crude death rates and infant and child mortality rates have declined. Causes of death have shifted from infectious to chronic diseases, but in 1992 major causes of death in children under 5 years old were preventable, and the maternal mortality rate was 425/100,000. Policies which guide the development of health care call for improvements in quality of life, adherence to humanitarian principles, use of scientifically approved traditional medicine, and provision of public health through a three-tiered system. Health care is financed by the government and the community, and managed care has been encouraged. Foreign aid has bolstered development in the health sector. Adequate sanitation has been achieved for 35% of the population, and 65% of urban and 35% of rural residents have reasonable access to clean water. Improvements in health indicators include 55% contraceptive prevalence, reduction in prevalence of anemia during pregnancy, 55.8% of pregnant women receiving prenatal care, a decrease in protein-energy malnutrition among children under five, and high vaccination coverage. Remaining public health problems include malaria, tuberculosis, dengue hemorrhagic fever, an increase in HIV/AIDS, iodine-deficiency, an increasing number of traffic fatalities, and an increasing number of smokers. New health policies have been instituted to meet these challenges as Indonesia's need for a productive and competitive labor force increases.

  19. Qualification of NDT systems for in-service inspections of nuclear power plant pressure vessels

    International Nuclear Information System (INIS)

    Elfving, K.

    1998-11-01

    The goal of this study is to determine the requirements of the in-service inspection qualification in Europe, their feasibility in practice and to find out possible manufacture defects in test pieces used in practical trials. The literature study consists of qualification requirements set by European regulatory bodies and by the European nuclear power utilities. Also a brief summary of qualification requirements set by ASME Code, Section XI and comparison between ASME and European qualification requirements is included

  20. Laboratory services series: an electrical outlet and corded equipment inspection program

    International Nuclear Information System (INIS)

    Davis, E.A.

    1976-04-01

    A research and development laboratory has thousands of electrical outlets providing power to laboratories, offices, shops, and service areas. These outlets provide power for a wide variety of portable equipment and tools that are equipped with cord and plug. Electric safety requires a periodic check of outlet grounding capability and continuing inspection and repair of corded equipment. Personnel, equipment, reports, procedures, and schedule requirements are reported

  1. Investigation of in service inspection for pressure vessel of the 200 MW nuclear heating reactor

    International Nuclear Information System (INIS)

    He Shuyan; Yin Ming; Liu Junjie; Chang Huanjian; Zhou Ningning

    1997-01-01

    The Nuclear District Heating Reactor (NHR) is a new type of reactor. There are some differences in the arrangement of the primary circuit components and in safety features between NHR and PWR or other reactors. In this paper the safety features of the 200 MW NHR are described. The failure probability, the LBB property and the in-service inspection requirement for the 200 MW NHR pressure vessel are also discussed. (author). 16 refs, 6 figs, 4 tabs

  2. In-service inspection of fertilizer and steel and ship building industries

    International Nuclear Information System (INIS)

    Sanaullah, Md.

    1998-01-01

    There is a good number of fertilizer factories, and steel and ship building industries in Bangladesh. Different NDT methods are being used for in-service inspection of these industries to ensure product reliability, to prevent accident and save human life, to maintain a uniform quality level, to lower manufacturing cost and to minimize the wastage of time and materials and for other benefits. (author)

  3. Investigation of in service inspection for pressure vessel of the 200 MW nuclear heating reactor

    Energy Technology Data Exchange (ETDEWEB)

    Shuyan, He; Ming, Yin; Junjie, Liu; Huanjian, Chang; Ningning, Zhou [Institute of Nuclear Energy and Technology, Tsingua Univ., Beijing (China)

    1997-09-01

    The Nuclear District Heating Reactor (NHR) is a new type of reactor. There are some differences in the arrangement of the primary circuit components and in safety features between NHR and PWR or other reactors. In this paper the safety features of the 200 MW NHR are described. The failure probability, the LBB property and the in-service inspection requirement for the 200 MW NHR pressure vessel are also discussed. (author). 16 refs, 6 figs, 4 tabs.

  4. Forensic mental health services: Current service provision and ...

    African Journals Online (AJOL)

    Forensic mental health services: Current service provision and planning for a prison mental health service in the Eastern Cape. Kiran Sukeri, Orlando A. Betancourt, Robin Emsley, Mohammed Nagdee, Helmut Erlacher ...

  5. Study on in-service visual inspection using TV camera for core support graphite components in the HTTR

    International Nuclear Information System (INIS)

    Ishihara, Masahiro; Shibata, Taiju; Kikuchi, Takayuki; Mogi, Haruyoshi

    1999-01-01

    To maintain the structural integrity of graphite components during plant operation a visual inspection using a TV camera as an in-service inspection is planned in the High Temperature Engineering Test Reactor. In order to verify the in-service inspection method a preliminary analytical and experimental studies were performed. In the analytical study the harmful flaw size was determined from a viewpoint of structural integrity based on the fracture mechanics approach. Furthermore, the visible flaw size was determined by the TV camera performance test with graphite test specimens having several kinds of artificial flaws. This paper presents the analytical result on the harmful flaw size and the experimental result on the visible flaw size. From both results the applicability on the visual inspection by the TV camera as the in-service inspection is discussed in this paper. (author)

  6. Study and discussion on management of nuclear island in-service inspection procedure system in nuclear power plant

    International Nuclear Information System (INIS)

    Zhang Xueliang; Fan Yancheng

    2014-01-01

    In-service inspection of nuclear island is the important way for keeping safety operation of nuclear power plant. Taking Daya Bay Nuclear Power Plant as example, the management problems of in-service inspection system was studied and discussed from the angle of references, contents, classifications etc. Based on comparison with French practice, some points of view on perfection of in-service inspection system and improvement of management ability under future multi-bases and multi-units management mode were presented. (authors)

  7. Nuclear containment systems and in-service inspection status of Korea nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Jihong, Park; Jaekeun, Hong; Banuk, Park [Korea Institute of Machinery and Materials, Dept. of Authorized Test and Evaluation, Kyungnam (Korea, Republic of)

    2007-07-01

    20 unit nuclear power plants in Korea have been operated and maintained since the first unit started in commercial service in 1978. Most recently 4 units were under construction and several units were planned to be constructed. by industries. 4 types of nuclear containment systems have been constructed until now: first, metal containments, then pre-stressed concrete containments with grouted tendon systems, followed by pre-stressed concrete containments with un-grouted tendon systems, and Korea standard nuclear containments. All the nuclear containments should be inspected periodically. Therefore for periodic in-service inspection, several appropriate technical requirements should be applied differently depending on the specific nuclear containment types. With the changes of times, nuclear containment systems have undergone a remarkable change, and finally nuclear containment system of Korea standard nuclear power plant was settled down, and as a matter of course it dominates the trend of present and future nuclear containment systems. Overall in-service inspection results of most Korea nuclear containments have not showed any serious evidence of degradation.

  8. Health Physics Measurements Services

    Energy Technology Data Exchange (ETDEWEB)

    Carchon, R

    2001-04-01

    SCK-CEN's programme on health physics measurements includes various activities in dosimetry, calibration , instrumentation , gamma-ray spectrometry, whole body counting , the preparation of standard sources, non-destructive assay and the maintenance of Euratom Fork detectors. Main achievements in these topical areas in 2000 are summarised.

  9. Health Physics Measurements Services

    International Nuclear Information System (INIS)

    Carchon, R.

    2001-01-01

    SCK-CEN's programme on health physics measurements includes various activities in dosimetry, calibration , instrumentation , gamma-ray spectrometry, whole body counting , the preparation of standard sources, non-destructive assay and the maintenance of Euratom Fork detectors. Main achievements in these topical areas in 2000 are summarised

  10. Strengthening Health Information Services

    Science.gov (United States)

    Haro, A. S.

    1977-01-01

    Discusses the need to apply modern scientific management to health administration in order to effectively manage programs utilizing increased preventive and curative capabilities. The value of having maximum information in order to make decisions, and problems of determining information content are reviewed. For journal availability, see SO 506…

  11. Social insurance for health service.

    Science.gov (United States)

    Roemer, M I

    1997-06-01

    Implementation of social insurance for financing health services has yielded different patterns depending on a country's economic level and its government's political ideology. By the late 19th century, thousands of small sickness funds operated in Europe, and in 1883 Germany's Chancellor Bismarck led the enactment of a law mandating enrollment by low-income workers. Other countries followed, with France completing Western European coverage in 1928. The Russian Revolution in 1917 led to a National Health Service covering everyone from general revenues by 1937. New Zealand legislated universal population coverage in 1939. After World War II, Scandinavian countries extended coverage to everyone and Britain introduced its National Health Service covering everyone with comprehensive care and financed by general revenues in 1948. Outside of Europe Japan adopted health insurance in 1922, covering everyone in 1946. Chile was the first developing country to enact statutory health insurance in 1924 for industrial workers, with extension to all low-income people with its "Servicio Nacional de Salud" in 1952. India covered 3.5 percent of its large population with the Employees' State Insurance Corporation in 1948, and China after its 1949 revolution developed four types of health insurance for designated groups of workers and dependents. Sub-Saharan African countries took limited health insurance actions in the late 1960s and 1970s. By 1980, some 85 countries had enacted social security programs to finance or deliver health services or both.

  12. In-service inspection of ET-RR-1 reactor vessels and spent fuel storage tank

    International Nuclear Information System (INIS)

    Khattab, M.; Shafy, M.; Konoplev, K.; Samodurve, YU.; Orlov, S.; Didenko, V.; Jackorev, O.

    1993-01-01

    Technical survey included in-service inspection are needed in order to investigate the structural integrity and to insure safe operation of the ET-R R-1 reactor after thirty years aging. An intensive work for the inspection of the inspection of the central tank, shield tank, horizontal channels, primary coolant circuit and spent fuel storage tank have been carried out. The inspection procedures were visual method using video camera and magnification optical as well as thickness measurements using ultrasonic gauge meter and replica for determining defect depth. Water chemical analysis of the primary cooling circuit and spent fuel storage were helpful in results explanation. The results showed that the reactor vessels have good surface conditions. The observed pitting did not affect the structural integrity. The majority of the defects were pits having maximum surface area of about 50 mm. Their depth does not exceed 2 mm. The pits depth rate penetration is of the order of 0.5% per year. Thickness measurements showed insignificant variation. Water status and its chemical properties are very important in controlling corrosion rate. 18 figs., 14 tabs

  13. Automation and mechanization of in-service inspection of selected equipment in FRG's nuclear power plants

    International Nuclear Information System (INIS)

    Metke, E.

    1988-01-01

    The procedures and equipment are described for the automation and mechanization of in-service inspection in nuclear power plants in the FRG, used by the KWU company. Checks of the pressure vessel are done by visual means using a colour tv camera, the method of eddy currents and the ultrasonic method. An analysis is made of the time schedule of ultrasonic inspections, and the central column manipulator is described which allows to check all internal regions of the pressure vessel. Attention is also devoted to other devices, e.g., those for prestressing shanks, cleaning shanks, cleaning thread apertures, etc. A combined probe using the ultrasonic method and the eddy current method serves the inspection of heat exchange tubes in the steam generator. For inspecting the primary circuit the KWU company uses devices for checking and working the inner surface of pipes. Briefly described are examples of using KWU equipment in nuclear power plants in CMEA countries. (Z.M.). 11 figs., 6 refs

  14. Human Rights and Health Services

    DEFF Research Database (Denmark)

    Skitsou, Alexandra; Bekos, Christos; Charalambous, George

    2016-01-01

    Background: It has been observed that health services provided to certain patients in Cyprus do not fully meet their human rights. Objective: This study was conducted to identify the main shortcomings of the Health System in Cyprus. Methodology: The relevant administrative decisions of the Ombuds......Background: It has been observed that health services provided to certain patients in Cyprus do not fully meet their human rights. Objective: This study was conducted to identify the main shortcomings of the Health System in Cyprus. Methodology: The relevant administrative decisions...... and their families to be essential. Conclusions: The paper concludes that implementing guidelines in accordance with international best practices, the establishment of at-home treatment and nursing facilities, counseling the mentally ill in a way that promotes their social integration and occupational rehabilitation......, ongoing education of health professionals along with relevant education of the community and the broad application of triage in the emergency departments will all contribute to delivering health services more effectively. Keywords: Cyprus, health services, patient rights...

  15. Ultrasonic guided wave interpretation for structural health inspections

    Science.gov (United States)

    Bingham, Jill Paisley

    Structural Health Management (SHM) combines the use of onboard sensors with artificial intelligence algorithms to automatically identify and monitor structural health issues. A fully integrated approach to SHM systems demands an understanding of the sensor output relative to the structure, along with sophisticated prognostic systems that automatically draw conclusions about structural integrity issues. Ultrasonic guided wave methods allow us to examine the interaction of multimode signals within key structural components. Since they propagate relatively long distances within plate- and shell-like structures, guided waves allow inspection of greater areas with fewer sensors, making this technique attractive for a variety of applications. This dissertation describes the experimental development of automatic guided wave interpretation for three real world applications. Using the guided wave theories for idealized plates we have systematically developed techniques for identifying the mass loading of underwater limpet mines on US Navy ship hulls, characterizing type and bonding of protective coatings on large diameter pipelines, and detecting the thinning effects of corrosion on aluminum aircraft structural stringers. In each of these circumstances the signals received are too complex for interpretation without knowledge of the guided wave physics. We employ a signal processing technique called the Dynamic Wavelet Fingerprint Technique (DFWT) in order to render the guided wave mode information in two-dimensional binary images. The use of wavelets allows us to keep track of both time and scale features from the original signals. With simple image processing we have developed automatic extraction algorithms for features that correspond to the arrival times of the guided wave modes of interest for each of the applications. Due to the dispersive nature of the guided wave modes, the mode arrival times give details of the structure in the propagation path. For further

  16. Conceptual design and assessment of in-service inspection and maintenance of KALIMER

    Energy Technology Data Exchange (ETDEWEB)

    Joo, Young Sang; Kim, Seok Hun; Kim, Jong Bum; Lee, Jae Han [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-05-01

    In the conceptual design stage of KALIMER, the philosophy and methodology of in-service inspection (ISI) and maintenance for the reactor system and components are proposed and described. The ISI and maintenance should be carried out throughout plant life to ensure the structural integrity and safety of KALIMER. The conceptual design of ISI and maintenance are performed for considering the design characteristics of KALIMER and the intents of the ASME XI Division 3. This report describes and summarizes the requirements and available methods of ISI and maintenance. The visual inspection and continuous monitoring play a great role in the in-service inspection of KALIMER. The major structures of KALIMER reactor system are designed for maintenance free operation for the plant life time and the maintenance philosophy is to replace major components rather than repair them. The assessment of the ISI accessibility and maintainability is performed and reviewed each major component. The postulated failure defects for each component are estimated and evaluated for KALIMER safety and reliability. 8 refs., 16 figs., 13 tabs. (Author)

  17. ASME section XI - design and access requirements for in-service inspection

    International Nuclear Information System (INIS)

    Davis, D.D.

    1982-01-01

    The Owner of a nuclear power plant has the regulatory commitment to perform Section XI in-service inspection throughout the service life of a plant. In anticipation of what will be needed to perform adequately the required examinations and tests, sub-article IWA-1500 of Section XI not only requires that sufficient access be provided to accommodate equipment and inspection personnel but also requires that other provisions be considered such as: component surface preparations, material selections, shielding, removal and storage of hardware, handling equipment, and provisions for repairs and replacements. It is, therefore, the owner's and the architect engineer's responsibility to ensure that proper design and access provisions are incorporated to enable the owner to meet his commitments. Since the architect engineer usually has the prime responsibility for the implementation of design criteria, the owner must ensure that these provisions be considered in each phase of design and construction. The benefits of this can result in shorter outages, more meaningful examinations and tests and less radiation exposure of inspection personnel. This paper will address in detail those topics that affect design and access provisions which need to be considered during the design and construction of a nuclear power plant. (author)

  18. The computer vision in the service of safety and reliability in steam generators inspection services

    International Nuclear Information System (INIS)

    Pineiro Fernandez, P.; Garcia Bueno, A.; Cabrera Jordan, E.

    2012-01-01

    The actual computational vision has matured very quickly in the last ten years by facilitating new developments in various areas of nuclear application allowing to automate and simplify processes and tasks, instead or in collaboration with the people and equipment efficiently. The current computer vision (more appropriate than the artificial vision concept) provides great possibilities of also improving in terms of the reliability and safety of NPPS inspection systems.

  19. Application of risk-informed methods to in-service piping inspection in Framatome type nuclear power plants

    International Nuclear Information System (INIS)

    Kim, Jin Hoi; Lee, Jeong Seok; Yun, Eun Sub

    2014-01-01

    The Pressurized water reactor owners group (PWROG) developed and applied a risk-informed in-service inspection (RI-ISI) program, as an alternative to the existing ASME Section XI sampling inspection method. The RI-ISI programs enhance overall safety by focusing inspections of piping at high safety significance (HSS) locations where failure mechanisms are likely to be present. Additionally, the RI-ISI program can reduce nondestructive evaluation (NDE) exams, man-rem exposure for inspectors, and inspection time, among other benefits. The RI-ISI method of in-service piping inspection was applied to 3 units (KSNPs: Korea standard nuclear power plants) and is being deployed to the other units. In this paper, the results of RI-ISI for a Framatome type (France CPI) nuclear power plant are presented. It was concluded that application of RI-ISI to the plant could enhance and maintain plant safety, as well as provide the benefits of greater reliability.

  20. The influence of frequency and reliability of in-service inspection on reactor pressure vessel disruptive failure probability

    International Nuclear Information System (INIS)

    Jordan, G.M.

    1978-01-01

    A simple probabilistic methodology is used to investigate the benefit, in terms of reduction of disruptive failure probability, which comes from the application of periodic in-service inspection to nuclear pressure vessels. The analysis indicates the strong interaction between inspection benefit and the intrinsic quality of the structure. In order to quantify the inspection benefit, assumptions are made which allow the quality to be characterised in terms of the parameters governing a log normal distribution of time - to - failure. Using these assumptions, it is shown that the overall benefit of in-service inspection unlikely to exceed an order of magnitude in terms of reduction of disruptive failure probability. The method is extended to evaluate the effect of the periodicity and reliability of the inspection process itself. (author)

  1. Development of a risk-based in-service inspection program for an LMR

    International Nuclear Information System (INIS)

    King, R.W.; Buschman, H.W.

    1996-01-01

    The emerging application of risk-based assessment technology to the operation and maintenance of nuclear power plants holds considerable promise for improving efficiency and reducing operating costs. Experimental Breeder Reactor II (EBR-II) is a liquid-metal-cooled fast reactor (LMR) that operated for 30 yr before shutting down in September 1994 due to program termination. Prior to the shutdown of EBR-II, an in-service inspection (ISI) program was developed that exploited certain advantages of the LMR design. For example, it demonstrated passive response to plant upset events, low-pressure primary coolant, and compatibility of the coolant and reactor materials. This ISI program was based on work currently being done by an American Society of Mechanical Engineers (ASME) Research Task Force on Risk-Based Inspection

  2. Inter-vessels in-service inspection of Super-Phenix

    International Nuclear Information System (INIS)

    Asty, M.; Saglio, R.; Viard, J.; Lerat, B.

    1984-01-01

    The vessels design of fast breeder reactor Super-Phenix enables inspection during operating time. A self-moving machine -MIR- has been built up especially for that purpose. It is able to carry out visual and ultrasonorous inspection. MIR structure is that of a tetrahedron, all tops of which are fitted with two wheels, as for traction and direction. The wheels are leaning on booth the two vessels. Thanks to a computer-assisted control system, MIR is able to move along in every part of the inter-vessels space. Studies have been carried on at the French Commissariat a l'Energie Atomique, by two Sections of the advanced technologies Service. After outlining MIR working conditions, its main characteristics are described [fr

  3. 78 FR 52127 - Tobacco Inspection and Grading Services: Notice of Request for an Extension of a Currently...

    Science.gov (United States)

    2013-08-22

    ... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service [AMS-CN-13-0046] Tobacco Inspection and...: Agricultural Marketing Service, USDA. ACTION: Notice and request for comments. SUMMARY: In accordance with the... 16, 2013. Rex A. Barnes, Associate Administrator, Agricultural Marketing Service. [FR Doc. 2013-20439...

  4. QUALITY IN HEALTH SERVICES MANAGEMENT

    Directory of Open Access Journals (Sweden)

    DORU CÎRNU

    2017-04-01

    Full Text Available The service sector plays an increasingly large modern market economies. By being unable to provide customers a tangible product in the hands of service providers makes the situation more difficult. Their success depends on customer satisfaction, which expect a certain benefit for the money paid, on quality, on mutual trust and many other attributes. What is very interesting is that they may differ from client to client, and there is no guarantee satisfaction to all customers, even if the service provided is the same. This shows the complex nature of services and efforts on service providers would have to be made permanent in order to attract more customers. This paper addresses the issues of continuous quality improvement of health services as an important part of the services sector. Until recently, these services in Romania although under strict control of the state, had a large number of patients who are given very little attention, which is why quality improvement acestoraa was compulsory. Opening and changing economic environment, increasing customer demands, forced hospitals that serve as a nodal point between these services and their applicants to adopt modern management methods and techniques to become competitive and to give patients the quality service expected. Modern society has always sought to provide the means to ensure good health closer to the needs of modern man. These have become more complex and more expensive and naturally requires financial resources increasingly mari.Este why, every time, all the failures alleging lack of money and resources in general. Is it true? Sometimes yes, often, no! The truth is that human and material resources are not used in an optimal way. The answer lies mainly in quality management. We will see what should be done in this regard.

  5. Federal health services grants, 1985.

    Science.gov (United States)

    Zwick, D I

    1986-01-01

    Federal health services grants amounted to about $1.8 billion in fiscal year 1985. The total amount was about $100 million less, about 6 percent, than in 1980. Reductions in the health planning program accounted for most of the decline in absolute dollars. The four formula grants to State agencies amounted to about $1.0 billion in 1985, about 60 percent of the total. The largest formula grants were for maternal and child health services and for alcohol, drug abuse, and mental health services. Project grants to selected State and local agencies amounted to about $.8 billion. There was 12 such grants in 1985 (compared with 34 in 1980). The largest, for community health services, equaled almost half the total. In real, inflation-adjusted dollars, the decline in Federal funds for these programs exceeded a third during the 5-year period. The overall dollar total in real terms in 1985 approximated the 1970 level. The ratio of formula grants to project grants in 1985 was similar to that in 1965. Studies of the impact of changes in Federal grants have found that while the development of health programs has been seriously constrained in most cases, their nature has not been substantially altered. In some cases broader program approaches and allocations have been favored. Established modes of operations and administration have generally been strengthened. Some efficiencies but few savings in administration have been identified. Replacement of reduced Federal funding by the States has been modest but has increased over time, especially for direct service activities. These changes reflect the important influence of professionalism in the health fields and the varying strengths of political interest and influence among program supporters. The long-term impact on program innovation is not yet clear.

  6. RSE-M: In-Service Inspection Rules for Mechanical Components of PWR Nuclear Islands

    International Nuclear Information System (INIS)

    2016-01-01

    The RSE-M code defines in-service inspection operations. It applies to pressure equipment used in PWR plants, as well as spare parts for such equipment. The RSE-M code does not apply to equipment made from materials other than metal. It is based on the RCC-M code for requirements relating to the design and fabrication of mechanical components. Use: The inspection rules specified in the RSE-M code describe the standard requirements of best practice within the French nuclear industry, based on its own feedback from operating several nuclear units and partly supplemented with requirements stipulated by French regulations. To date, the 58 units in France's nuclear infrastructure enforce the in-service inspection rules of the RSE-M code. Operation of 30 commissioned units in China's nuclear infrastructure, corresponding to the M310, CPR-1000 and CPR-600 reactors, is based on the RSE-M code (since 2007, use of AFCEN codes has been required by NNSA for Generation II+ reactors). Contents of the 2016 Edition: Volume I - Rules: Section A - General rules, Section B - Specific rules for class 1 components, Section C - Specific rules for class 2 or 3 components, Section D - Specific rules for components not assigned to any particular RSE-M class; Volume II - Appendices 1 to 8: Appendices 1.0 to 1.9: supporting appendices for the general requirements, Appendix 2.1: appendix associated with chap. 2000 Requalifications, Hydraulic Proof Tests and Hydraulic Tests, Appendices 4.1 to 4.4: appendices associated with chap. 4000 Examination techniques, Appendices 5.1 to 5.8 and RPP2: appendices associated with chap. 5000 Mechanical and Materials, Appendices 8.1 to 8.2: appendices associated with chap. 8000 Maintenance Operations; Volume III: Appendix 3.1 - Visit tables: main primary and secondary systems, EPR pre-service inspection program, Class 2 or 3 vessels; Appendix 3.2 - Inspection Plans For Non-Nuclear Pressure Equipment

  7. Health-physics Measurements: Services

    International Nuclear Information System (INIS)

    Hardeman, F.; Hurtgen, C.; Vanhavere, F.; Vanmarcke, H.

    1998-01-01

    SCK-CEN's programme on health-physics (1) offers complete services in health-physics measurements according to international quality standards; (2) contributes to improve continuously these measurement techniques and follows up international recommendations and legislation concerning the surveillance of workers; (3) provides support and advise to nuclear and non-nuclear industry on issues of radioactive contamination. Progress and achievements in 1997 are summarised

  8. In-service inspection and maintenance schedule for a typical TRIGA Mark-II reactor

    International Nuclear Information System (INIS)

    Boeck, H.

    1996-05-01

    This report lists all the systems and components of the TRIGA reactor Vienna which are inspected and maintained in regular intervals. These intervals are categorized in monthly, quarterly, semi-annual and annual inspections. Further the type of inspection and the responsibility for the inspection is shown. For each component specific inspection sheets have been developed, some examples are given in the annex. (author)

  9. Statistical Sampling For In-Service Inspection Of Liquid Waste Tanks At The Savannah River Site

    International Nuclear Information System (INIS)

    Harris, S.

    2011-01-01

    Savannah River Remediation, LLC (SRR) is implementing a statistical sampling strategy for In-Service Inspection (ISI) of Liquid Waste (LW) Tanks at the United States Department of Energy's Savannah River Site (SRS) in Aiken, South Carolina. As a component of SRS's corrosion control program, the ISI program assesses tank wall structural integrity through the use of ultrasonic testing (UT). The statistical strategy for ISI is based on the random sampling of a number of vertically oriented unit areas, called strips, within each tank. The number of strips to inspect was determined so as to attain, over time, a high probability of observing at least one of the worst 5% in terms of pitting and corrosion across all tanks. The probability estimation to determine the number of strips to inspect was performed using the hypergeometric distribution. Statistical tolerance limits for pit depth and corrosion rates were calculated by fitting the lognormal distribution to the data. In addition to the strip sampling strategy, a single strip within each tank was identified to serve as the baseline for a longitudinal assessment of the tank safe operational life. The statistical sampling strategy enables the ISI program to develop individual profiles of LW tank wall structural integrity that collectively provide a high confidence in their safety and integrity over operational lifetimes.

  10. Automatic ultrasonic testing and the LOFT in-service inspection program

    International Nuclear Information System (INIS)

    Hunter, J.A.

    1980-01-01

    An automatic ultrasonic testing system has been developed which significantly improves the flaw indication detection and characterization capability over the capability of conventional volumetric examination techniques. The system utilizes an accurately located ultrasonic sensor to generate the examination data. A small computer performs and integrates control and data input/output functions. Computer software has been developed to provide a rigorous method for data analysis and ultrasonic image interpretation. The system has been used as part of an in-service inspection program to examine welds in thich austenitic stainless steel pipes in a small experimental nuclear reactor

  11. Level of Service Program for INDOT Operations : APPENDIX A State Inspection Programs

    Science.gov (United States)

    2012-01-01

    INDOT has used an inspection program named Maintenance Quality Survey (MQS) to perform a statewide inspection of their roadway assets, rightofway to rightofway. This inspection requires two twoperson teams approximately 18 months to...

  12. State health agency workforce shortages and implications for public health: a case study of restaurant inspections in Louisiana.

    Science.gov (United States)

    Realmuto, Lindsey; Hunting, Katherine L; Parkin, Rebecca

    2013-12-01

    The study described in this article evaluated the effects of public health workforce cuts on routine food safety inspections and the occurrence of critical violations. Routine inspection information was collected from two Louisiana databases for permanent food establishments categorized as risk category 3 or 4 in East Baton Rouge Parish, Louisiana, for the years 2005, 2007, and 2009. The length of time between routine inspections nearly quadrupled from 2005 to 2009. For risk category 4 establishments, a significant increase occurred in the proportion of inspections that resulted in a critical violation between the three years. The amount of time between routine inspections was significantly higher for inspections that resulted in a critical violation versus those that did not. Lastly, the amount of time between routine inspections, an establishment's risk category, and history of complaint were found to have significant predictive effects on the incidence of a critical violation during a routine inspection, although results varied by year. Study results indicate that decreased workforce capacity in Louisiana may negatively affect the outcomes of routine food safety inspections.

  13. Birth of a health service.

    Science.gov (United States)

    Anderson, G

    On April 18th, independent Zimbabwe celebrated its 3rd birthday. In 1980, within days after taking power, Robert Mugabe's government announced that health care was to be free to everyone earning less then Z150 (60 British pounds) a month--the vast majority of the population. Although the free services are a good public relations policy, more important was the decision to expand the health services at grassroots level and to shift emphasis from an urban based curative system to rural based preventive care. Zimbabwe desperately needs doctors. According to the World Health Organization (WHO), the country has some 1400 registered doctors, roughly 1 for every 6000 people. Yet, of the 1400, under 300 work in the government health services and many of those are based in Harare, the capital. Of Zimbabwe's 28 district hospitals, only 14 have a full-time doctor. In some rural areas, there is 1 doctor/100,000 or more people. The nature of the country's health problems, coupled with the government's severe shortage of cash, shows why nursing is so crucial to Zimbabwe's development. If the rural communities, which make up 85% of the population, were to have easy access to a qualified nurse, or even a nursing assistant, the quality of life would double. The only thing that is more important is a clean water supply. Possibly the most important role for nurses in Zimbabwe is that of education. Nurses can spread awareness of basic hygiene, raise the skill of local people in dealing with minor health problems independently, carry out immunization programs, offer contraceptive advice, give guidance on breastfeeding and infant nutrition, and work with practitioners of traditional African medicines to make sure they possess basic scientific knowledge. Rebuilding after the war was not a major problem for the Mugabe health ministry, for in many areas there was simply nothing to rebuild. There were never any health services. A far greater problem has been the top heavy structure of the

  14. In-service Inspection of Radioactive Waste Tanks at the Savannah River Site – 15410

    Energy Technology Data Exchange (ETDEWEB)

    Wiersma, Bruce [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Maryak, Matthew [Savannah River Remediation, LLC., Aiken, SC (United States); Baxter, Lindsay [Univ. of Notre Dame, IN (United States); Harris, Stephen [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Elder, James [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-01-12

    Liquid radioactive wastes from the Savannah River Site (SRS) separation process are stored in large underground carbon steel tanks. The high level wastes are processed in several of the tanks and then transferred by piping to other site facilities for further processing before they are stabilized in a vitrified or grout waste form. Based on waste removal and processing schedules, many of the tanks will be required to be in service for times exceeding the initial intended life. Until the waste is removed from storage, transferred, and processed, the materials and structures of the tanks must maintain a confinement function by providing a barrier to the environment and by maintaining acceptable structural stability during design basis events, which include loadings from both normal service and abnormal (e.g., earthquake) conditions. A structural integrity program is in place to maintain the structural and leak integrity functions of these waste tanks throughout their intended service life. In-service inspection (ISI) is an essential element of a comprehensive structural integrity program for the waste tanks at the Savannah River Site (SRS). The ISI program was developed to determine the degree of degradation the waste tanks have experienced due to service conditions. As a result of the inspections, an assessment can be made of the effectiveness of corrosion controls for the waste chemistry, which precludes accelerated localized and general corrosion of the waste tanks. Ultrasonic inspections (UT) are performed to detect and quantify the degree of general wall thinning, pitting and cracking as a measure of tank degradation. The results from these inspections through 2013, for the 27 Type III/IIIA tanks, indicate no reportable in-service corrosion degradation in the primary tank (i.e., general, pitting, or cracking). The average wall thickness for all tanks remains above the manufactured nominal thickness minus 0.25 millimeter and the largest pit identified is

  15. [Smart cards in health services].

    Science.gov (United States)

    Rienhoff, O

    2001-10-01

    Since the early 1980-ties it has been tried to utilise smart cards in health care. All industrialised countries participated in those efforts. The most sustainable analyses took place in Europe--specifically in the United Kingdom, France, and Germany. The first systems installed (the service access cards in F and G, the Health Professional Card in F) are already conceptionally outdated today. The senior understanding of the great importance of smart cards for security of electronic communication in health care does contrast to a hesitating behaviour of the key players in health care and health politics in Germany. There are clear hints that this may relate to the low informatics knowledge of current senior management.

  16. Sigma: computer vision in the service of safety and reliability in the inspection services

    International Nuclear Information System (INIS)

    Pineiro, P. J.; Mendez, M.; Garcia, A.; Cabrera, E.; Regidor, J. J.

    2012-01-01

    Vision Computing is growing very fast in the last decade with very efficient tools and algorithms. This allows new development of applications in the nuclear field providing more efficient equipment and tasks: redundant systems, vision-guided mobile robots, automated visual defects recognition, measurement, etc., In this paper Tecnatom describes a detailed example of visual computing application developed to provide secure redundant identification of the thousands of tubes existing in a power plant steam generator. some other on-going or planned visual computing projects by Tecnatom are also introduced. New possibilities of application in the inspection systems for nuclear components appear where the main objective is to maximize their reliability. (Author) 6 refs.

  17. French codes and standards for design, construction and in-service inspection of nuclear power plants

    International Nuclear Information System (INIS)

    Hugot, G.; Grandemange, J. M.

    1995-01-01

    In 1970, France decided that its future power plants would be of the Pressurized Water Reactor type. This choice proved to be successful since it resulted in more than 60 PWR units in operation or under construction in France and abroad. At the beginning of such a program, the French engineering and manufacturing industry, the national electrical utility and the Safety Authorities had to face the many challenges imposed by the implementation of an imported technology. The government reorganised the licensing process. FRAMATOME, the NSSS vendor, and EDF (Electricite de France), the national utility, decided to create 'AFCEN', the French Association for Design and Construction Rules for Nuclear Island Components. These rules, the RCC's (Regles de Construction et de conception), which are approved by French Safety Authorities deal with mechanical and electrical equipment as well as with nuclear fuel and civil works. They are now being supplemented by in service inspection rules, the RSE's (Regles d'inspection en Service). The paper presents these Codes and their main updating following experience of application, technical progress and evolution of standards. Status of discussion concerning reference to European standardisation and developments of rules applicable to the EPR project will also be discussed

  18. The ASME research task force on risk-based in-service inspection

    International Nuclear Information System (INIS)

    Balkey, K.R.; Chapman, O.J.V.

    1997-01-01

    The use of risk-based methods in the development of in-service inspection (ISI) and in-service testing (IST) programs for nuclear power plant and other industrial applications has been studied for the last several years through the American Society of Mechanical Engineers Centre for Research and Technology Development (ASME 1991, 1992, 1994, 1996). The results of this work are being used as a foundation to develop specific requirements for implementation of risk-based technology in ASME Codes and Standards, regulatory requirements and industry programs both in the U.S. and other countries. This paper provides a brief overview of the ASME Research Methodology and how it has been adapted for application to the inspection of piping within the USA. It also relates how the reliability of nondestructive examination (NDE) methods for pressure boundary components can impact the risk and discusses the relationship between this and NDE qualification/demonstration now being implemented in Europe and the USA. (orig.)

  19. Overview of improvements in work practices and instrumentation for CANDU primary heat transport feeders in-service inspections

    Energy Technology Data Exchange (ETDEWEB)

    Marcotte, O., E-mail: olivier@nucleom.ca [Nucleom Inc., Quebec, Quebec (Canada); Rousseau, G., E-mail: rousseau.gilles.a@hydro.qc.ca [Hydro Quebec, Becancour, Quebec (Canada); Rochefort, E., E-mail: erochfort@zetec.com [Zetec Canada, Quebec, Quebec (Canada)

    2013-01-15

    The Canadian nuclear industry has developed many advanced non-destructive inspection techniques to be applied safely in hazardous environments in recent years. Automated systems, manual tooling and specialized software modules have been designed since early 2000s to provide complete and very efficient fitness for service inspection of primary heat transport system carbon steel feeder pipes. These techniques deal with complex geometries, difficult access and, radioactive environment. Complementary NDE techniques, namely Ultrasounds, eddy current, phased-array UT and automated scanners are used. This presentation describes the improvements in inspection practices and the advanced data analysis features. (author)

  20. Report on the Regulators Experience of NDT Qualification for In-service Inspection of Nuclear Components

    International Nuclear Information System (INIS)

    2003-08-01

    In November 1992, the Nuclear Regulators Working Group (NRWG) decided to set up a task force on qualification of non-destructive testing (NDT) systems for pre and in-service inspection of light water reactors. The first task was to agree on the philosophy and principles governing the qualification of techniques, equipment, software, procedures, and personnel for NDT to be used for the inspection of structural components that are important to safety in nuclear power plants; and to establish a common view on essential aspects of NDT qualifications. The first task, which also included a comparison of the common views of the European regulators with the qualification approach outlined in Appendix VIII to Section XI of the ASME Code, was completed in 1996. The result was published in the report ''Common position of European regulators on qualification of NDT systems for pre- and in-service inspection of light water reactor components''2. In parallel, the European nuclear power industries had set up a working group, the European Network for Inspection Qualification (ENIQ), to discuss and agree on how to perform inspection qualifications. In 1995, ENIQ finalized its first version of ''European methodology for qualification of non-destructive tests''3. A second version 4 was then published in 1997. This second version is in relatively close agreement with the principles given in the regulators common position document. With these two basic documents, a platform was established for the further development of qualification strategies in the European countries. The second task of the NRWG Task Force was to follow and evaluate the first ENIQ pilot study from a regulatory point of view. The objective of this pilot study was to explore ways of how to apply the European qualification methodology and to test its feasibility. The pilot study commenced late 1996 and was planned to be finalized a year later. Depending on unforeseen difficulties, the pilot study has been delayed

  1. Applicability of PSA Issues for Risk Assessment during Optimisation of In-Service Inspection

    International Nuclear Information System (INIS)

    Kolykhanov, V.; Skalozubov, V.; Kovrigkin, Y.

    2006-01-01

    The current codes determining periodicity of in-service inspection of the NPP equipment have been formed using deterministic approaches and have an unnecessary degree of conservatism. A perspective direction of perfection of normative base is decision making on a basis of risk-informed methodologies. It allows to increase safety of NPP equipment's operation and to optimise programs on inspection of the equipment subject to limited resources by focusing efforts on the most safety significant elements of the equipment. It is internationally accepted that methodology of the probabilistic safety analysis (PSA) is the most universal and comprehensive tool focused on the general assessment of safety of NPP as a whole. By now, PSA Level 1 is fulfilled for all pilot units of the Ukrainian NPPs that is a valuable result, which should be taken into account at an assessment of reliability of the equipment. However, specificity of PSA methodology should be taken into account at the decision of the particular tasks aimed at optimisation of maintenance of the equipment within individual systems. The estimation of the contribution to core damage frequency (CDF) is a PSA issue usually used to assess the significance of consequences of failure of a system/equipment during risk-informed decision-making. This work shows that above factor is only a part of assessment of the significance of consequences as core damage can be expressed in different amount of the damaged fuel elements and, hence, severity of consequences. Besides CDF is directly affected only by active elements which failure can be an initiating event. PSA methodology uses averaged reliability factors of the equipment for all possible operating modes occurring at transitive accident process. Here, there are limited opportunities to account impact of periodicity of maintenance of the equipment on reliability and to predict impact of change of the inspection program. PSA methodology does not allow taking into account

  2. College Health: Health Services and Common Health Problems

    Science.gov (United States)

    ... Many colleges also have a counseling center which students should go to for mental health concerns. How can I get seen at the ... services that I need? The staff at your student health center will know ... gynecologists, and mental health clinicians in the community in case you ...

  3. Maintenance, surveillance and in-service inspection in nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2002-01-01

    Effective maintenance, surveillance and in-service inspection (MS and I) are essential for the safe operation of a nuclear power plant. The objective of this Safety Guide is to provide recommendations and guidance for MS and I activities to ensure that SSCs important to safety are available to perform their functions in accordance with the assumptions and intent of the design. This Safety Guide covers the organizational and procedural aspects of MS and I. However, it does not give detailed technical advice in relation to particular items of plant equipment, nor does it cover inspections made for and/or by the regulatory body. This Safety Guide provides recommendations and guidance for preventive and remedial measures, including testing, surveillance and in-service inspection, that are necessary to ensure that all plant structures, systems and components (SSCs) important to safety are capable of performing as intended. This Safety Guide covers measures for fulfilling the organizational and administrative requirements for: establishing and implementing schedules for preventive and predictive maintenance, repairing defective plant items, selecting and training personnel, providing related facilities and equipment, procuring stores and spare parts, and generating, collecting and retaining maintenance records for establishing and implementing an adequate feedback system for information on maintenance. MS and I should be subject to quality assurance in relation to all aspects important to safety. Quality assurance has been dealt with in detail in other IAEA safety standards and is covered here only in specific instances, for emphasis. In Section 2, a concept of MS and I is presented and the interrelationship between maintenance, surveillance and inspection is discussed. Section 3 concerns the functions and responsibilities of different organizations involved in MS and I activities. Section 4 provides recommendations and guidance on such organizational aspects as

  4. Maintenance, surveillance and in-service inspection in nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2005-01-01

    Effective maintenance, surveillance and in-service inspection (MS and I) are essential for the safe operation of a nuclear power plant. The objective of this Safety Guide is to provide recommendations and guidance for MS and I activities to ensure that SSCs important to safety are available to perform their functions in accordance with the assumptions and intent of the design. This Safety Guide covers the organizational and procedural aspects of MS and I. However, it does not give detailed technical advice in relation to particular items of plant equipment, nor does it cover inspections made for and/or by the regulatory body. This Safety Guide provides recommendations and guidance for preventive and remedial measures, including testing, surveillance and in-service inspection, that are necessary to ensure that all plant structures, systems and components (SSCs) important to safety are capable of performing as intended. This Safety Guide covers measures for fulfilling the organizational and administrative requirements for: establishing and implementing schedules for preventive and predictive maintenance, repairing defective plant items, selecting and training personnel, providing related facilities and equipment, procuring stores and spare parts, and generating, collecting and retaining maintenance records for establishing and implementing an adequate feedback system for information on maintenance. MS and I should be subject to quality assurance in relation to all aspects important to safety. Quality assurance has been dealt with in detail in other IAEA safety standards and is covered here only in specific instances, for emphasis. In Section 2, a concept of MS and I is presented and the interrelationship between maintenance, surveillance and inspection is discussed. Section 3 concerns the functions and responsibilities of different organizations involved in MS and I activities. Section 4 provides recommendations and guidance on such organizational aspects as

  5. Reducing uncertainty in wind turbine blade health inspection with image processing techniques

    Science.gov (United States)

    Zhang, Huiyi

    Structural health inspection has been widely applied in the operation of wind farms to find early cracks in wind turbine blades (WTBs). Increased numbers of turbines and expanded rotor diameters are driving up the workloads and safety risks for site employees. Therefore, it is important to automate the inspection process as well as minimize the uncertainties involved in routine blade health inspection. In addition, crack documentation and trending is vital to assess rotor blade and turbine reliability in the 20 year designed life span. A new crack recognition and classification algorithm is described that can support automated structural health inspection of the surface of large composite WTBs. The first part of the study investigated the feasibility of digital image processing in WTB health inspection and defined the capability of numerically detecting cracks as small as hairline thickness. The second part of the study identified and analyzed the uncertainty of the digital image processing method. A self-learning algorithm was proposed to recognize and classify cracks without comparing a blade image to a library of crack images. The last part of the research quantified the uncertainty in the field conditions and the image processing methods.

  6. DPH Disease Information: Tuberculosis - Delaware Health and Social Services

    Science.gov (United States)

    Homes Healthy Workplaces Laboratory Restaurant Inspections Screening and Testing WIC Additional Services Center Personal Income Tax Privacy Policy Weather & Travel Contact Us Corporations Franchise Tax

  7. Health services research in urology.

    Science.gov (United States)

    Yu, Hua-Yin; Ulmer, William; Kowalczyk, Keith J; Hu, Jim C

    2011-06-01

    Health services research (HSR) is increasingly important given the focus on patient-centered, cost-effective, high-quality health care. We examine how HSR affects contemporary evidence-based urologic practice and its role in shaping future urologic research and care. PubMed, urologic texts, and lay literature were reviewed for terms pertaining to HSR/outcomes research and urologic disease processes. HSR is a broad discipline that focuses on access, cost, and outcomes of Health care. Its use has been applied to a myriad of urologic conditions to identify deficiencies in access, to evaluate cost-effectiveness of therapies, and to evaluate structural, process, and outcome quality measures. HSR utilizes an evidence-based approach to identify the most effective ways to organize/manage, finance, and deliver high-quality urologic care and to tailor care optimized to individuals.

  8. Ultrasonic wall thickness gauging for ferritic steam generator tubing as an in-service inspection tool

    International Nuclear Information System (INIS)

    Haesen, W.M.J.; Tromp, Th.J.

    1980-01-01

    In-service inspection of LWR steam generators is more or less a standard routine operation. The situation can be very different for LMFBRs. For the SNR 300 (Kalkar Power Station) the situation is different because the steam generators have ferritic tubing. The tube walls are comparatively thick, 2 to 4.5 mm. During inservice examinations the steam generators will be drained on both sides, however on the sodium side a sodium film will be present. Furthermore the SNR 300 will have two types of steam generator. A straight tube design and a helical coil design will be used. Both types consist of a evaporator and superheater. The steam generators are of course not radioactive. It is obvious that in this case the eddy current (EC) technique is not an enviable inservice inspection tool. Basically EC is a surface flaw detection technique. Only the saturation magnetisation method will improve the EC technique sufficiently for ferritic material. However the 'in bore examination' with the saturation technique was, in case of the SNR 300 steam generator tubing, considered impossible since the inner diameters are fairly small. Furthermore sodium traces may influence the EC method. Although multifrequency methods can solve this problem, EC is not considered as a useful tool for examining ferritic tubing. Another method is to employ the 'stray flux' method which is under development with the TNO organization in Holland. The EC and stray flux method do have one drawback, these methods do not detect gradual changes in wall thickness. Ultrasonic examinations will be used in the SNR 300 as the main inspection tool for the steam generators. In this paper the reasons why ultrasonic examination was selected are explained. The results of the development work on this subject are discussed

  9. An automated eddy current in-service inspection system for nuclear steam generator tubing

    International Nuclear Information System (INIS)

    Wells, N.S.

    1981-06-01

    A prototype steam generator in-service inspection system incorporating remotely-controlled instrumentation linked by a digital transmission line to an instrument and control trailer outside the reactor containment has been designed and manufactured and is presently undergoing field tests. The (Monel 400) steam generator tubes are scanned two at a time using absolute eddy current probes controlled by two remotely-operated probe drives at a scanning speed of 0.5 m/s. The probes are positioned on the tubesheet by a light-weight (1.5 kg) microprocessor-operated tubesheet walker mechanism. Digitized control and data signals are transmitted up to 300 m to the control trailer. There the control and analysis computers extract the relevant signal information and present it in condensed form as labelled graphics on CRT consoles for on-line visual assessment. Hard copy output is also provided for each tube scanned (one per minute). Condensed data is archived on magnetic tapes for additional off-line analysis and comparisons with other inspections

  10. Evaluation of sampling plans for in-service inspection of steam generator tubes

    International Nuclear Information System (INIS)

    Kurtz, R.J.; Heasler, P.G.; Baird, D.B.

    1994-02-01

    This report summarizes the results of three previous studies to evaluate and compare the effectiveness of sampling plans for steam generator tube inspections. An analytical evaluation and Monte Carlo simulation techniques were the methods used to evaluate sampling plan performance. To test the performance of candidate sampling plans under a variety of conditions, ranges of inspection system reliability were considered along with different distributions of tube degradation. Results from the eddy current reliability studies performed with the retired-from-service Surry 2A steam generator were utilized to guide the selection of appropriate probability of detection and flaw sizing models for use in the analysis. Different distributions of tube degradation were selected to span the range of conditions that might exist in operating steam generators. The principal means of evaluating sampling performance was to determine the effectiveness of the sampling plan for detecting and plugging defective tubes. A summary of key results from the eddy current reliability studies is presented. The analytical and Monte Carlo simulation analyses are discussed along with a synopsis of key results and conclusions

  11. Nuclear reactor capable of electric power generation during in-service inspection

    International Nuclear Information System (INIS)

    Nakamura, Shinsuke; Nogami, Hitoshi.

    1992-01-01

    The nuclear power plant according to the present invention can generate electric power even in a period when one of a pair of reactors is put to in-service inspection. That is, the nuclear power plant of the present invention comprises a system constitution of two nuclear reactors each of 50% thermal power and one turbine power generator of 100% electric power. Further, facilities of various systems relevant to the two reactors each of 50% thermal power, as a pair, are used in common as much as possible in order to reduce the cost for construction and maintenance/ inspection. Further, a reactor building and a turbine building disposed in adjacent with each for paired two reactors each of 50% thermal power are arranged vertically. This arrangement can facilitate the common use of the facilities for various systems and equipments to attain branching and joining of fluids in reactor feed water systems and main steam system pipelines easily with low pressure loss and low impact shocks. The facility utilization factor of such reactors is remarkably improved by doubling the period of continuous power generation. As a result, economic property is remarkably improved. (I.S.)

  12. Analisis Kepatuhan Supervisor Terhadap Implementasi Program Occupational Health & Safety (Ohs) Planned Inspection Di PT. Ccai

    OpenAIRE

    Sarah, Dewi; Ekawati, Ekawati; Widjasena, Baju

    2015-01-01

    The Government has issued Regulation Legislation No. 50 Year 2012 on Health and Safety Management System (SMK3). CCAI is a company that has implemented SMK3. The application of the CCAI SMK3 supported by K3 program one of them is OHS Planned Inspection. This study aimed to analyze the implementation of Occupational Health & Safety (OHS) program Planned Inspection in CCAI. The subjects of this study amounted to five people as the main informants and 2 as an informant triangulation. The res...

  13. Reliability-based service life assessment of concrete structures in nuclear power plants: optimum inspection and repair

    International Nuclear Information System (INIS)

    Ellingwood, B.R.; Mori, Y.

    1995-01-01

    Research is being conducted to address aging management of safety-related reinforced concrete structures in nuclear power plants (NPPs). Documentation is being prepared to identify potential structural safety issues and to recommend criteria for use in evaluating reinforced concrete structures for continued service. Time-dependent reliability analysis provides the framework and quantitative tools for the condition assessment. The role of in-service inspection and repair in ensuring continued reliability in-service is examined. (author). 19 refs., 4 figs

  14. World Trade Organization activity for health services.

    Science.gov (United States)

    Gros, Clémence

    2012-01-01

    Since the establishment of a multilateral trading system and the increasing mobility of professionals and consumers of health services, it seems strongly necessary that the World Trade Organization (WTO) undertakes negotiations within the General Agreement on Trade in Services (GATS), and that WTO's members attempt to reach commitments for health-related trade in services. How important is the GATS for health policy and how does the GATS refer to health services? What are the current negotiations and member's commitments?

  15. In service inspection of pipes based on risk methods; Inspeccion en servicio de tuberias basada en metodos de riesgo

    Energy Technology Data Exchange (ETDEWEB)

    Mendoza G, G.; Viais J, J.; Carmona C, M. [ININ, Centro Nuclear ' Dr. Nabor Carrillo Flores' , Carretera Mexico Toluca, S/N. La Marquesa, Ocoyoacac, Mexico, C. P. 52750 (Mexico)]. e-mail: gmg@nuclear.inin.mx

    2006-07-01

    The politics of the Nuclear Regulatory Commission (by its initials in English NRC) of the United States of America on the use of the Probabilistic Safety Analysis (PSA) in activities of nuclear regulation it foments the use of this analysis technique to improve the decisions making, to reduce the unnecessary work in maintenance aspects, inspection and tests and to improve the regulatory efficiency. The inspection programs in service (ISI by its initials in English) developed by the American Society of Mechanical Engineers (by its initials in English ASME) it has been the one primary mechanism to prove the mechanical equipment in plants of nuclear energy, these programs indeed have been carried out in plants of nuclear energy by more of two decades. Their purpose is to identify the conditions, such as indications of cracks that are precursory of flights and ruptures which violate the integrity principles of the pressure frontier. The inspection in service activities include ultrasonic tests, surface tests and penetrating liquids test, also activities that include the scaffolds construction, removal of insulations and welding polishing. The inspections in service every 18 months during the times outside of service are executed. One of the objectives is to lower the costs of the inspections during the times outside of service and to reduce the exposure to the radiation by part of the personnel during these times out for inspections, while it is increased or it maintains the personnel's safety and the reliability. As part of the methodology a pipe segment is selected for which a fault in any point has the same consequences, being calculated the fault probability of the tube using the dimensions of the segment. In this work the inspection in service methodology is applied based on risk to an aspersion system of low pressure of the Laguna Verde Nucleo electric Central. For this system a reduction in the number of welding to inspect of 103 to only 15 is obtained

  16. Health department inspection criteria more likely to be associated with outbreak restaurants in Minnesota.

    Science.gov (United States)

    Petran, Ruth L; White, Bruce W; Hedberg, Craig W

    2012-11-01

    Millions of routine restaurant inspections are performed each year in the United States, and the Centers for Disease Control and Prevention has reported that a majority of foodborne illness outbreaks occur in restaurant settings. In an attempt to relate the data collected during inspections in Minnesota to illness likelihood, data from routine inspections conducted at outbreak restaurants were compared with data from routine inspections conducted at nonoutbreak restaurants. The goal was to identify differences in recorded violations. Significantly more violations were recorded at restaurants that had outbreaks. The majority of these violations were related to contamination in the facility and environment and to food handling procedures. Relative risks also were calculated for violations significantly more likely to occur at locations that had outbreaks of norovirus infection, Clostridium perfringens infection or toxin-type illness, and Salmonella infection. These three pathogens are estimated to cause the majority of foodborne illnesses in the United States. Meta-analysis of composited data for the three pathogens revealed 11 violations significantly more likely (α restaurants than during inspections at nonoutbreak restaurants. Application of this information permits assessment of health department inspection data in a consistent fashion. This approach can help identify criteria more likely to be associated with outbreak locations and allow operators to focus on interventions that will have the most significant impact in higher risk establishments.

  17. Automation of eddy current system for in-service inspection of turbine and generator rotor bores

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    The current project (EPRI-RP-1975-5) is a continuation of activities that began several years ago. Those results (EPRI-RP-1957-1) indicated that eddy current testing shows promise for in-service inspection. The current project investigates the degree to which eddy current testing can be used to replace bore magnetic particle testing. For this purpose, correlation studies between eddy current and magnetic particle tests are being undertaken on laboratory rotor sections and field test pieces of rotors. The eddy current data are to be gathered automatically by a combination of the Nortec-25L Eddyscope (to provide the analog eddy current signals) and the General Electric DATAQ/sup TM/ (a registered trademark of the General Electric Co.) System (to perform the automatic data acquisition). This paper describes some test results on a flaked laboratory rotor section

  18. The influence of frequency and reliability of in-service inspection on reactor pressure vessel disruptive failure probability

    International Nuclear Information System (INIS)

    Jordan, G.M.

    1977-01-01

    A simple probabilistic methodology is used to investigate the benefit, in terms of reduction of disruptive failure probability, which comes from the application of periodic In Service Inspection (ISI) to nuclear pressure vessels. The analysis indicates the strong interaction between inspection benefit and the intrinsic quality of the structure. In order to quantify the inspection benefit, assumptions are made which allow the quality to be characterized in terms of the parameters governing a Log Normal distribution of time-to-failure. Using these assumptions, it is shown that the overall benefit of ISI is unlikely to exceed an order of magnitude in terms of reduction of disruptive failure probability. The method is extended to evaluate the effect of the periodicity and reliability of the inspection process itself. (author)

  19. Psychotherapy services outside the National Health Service *

    Science.gov (United States)

    Kroll, Una

    1976-01-01

    With the help of an Upjohn Travelling Fellowship, I visited 15 units providing services for people under stress. There were nine residential units and six non-residential units, all were Christian charitable organisations and in all there was close co-operation with the medical profession. All these organisations accept referrals from general practitioners and deserve to be more widely known. PMID:1255548

  20. Psychotherapy services outside the National Health Service.

    Science.gov (United States)

    Kroll, U

    1976-02-01

    With the help of an Upjohn Travelling Fellowship, I visited 15 units providing services for people under stress. There were nine residential units and six non-residential units, all were Christian charitable organisations and in all there was close co-operation with the medical profession.All these organisations accept referrals from general practitioners and deserve to be more widely known.

  1. The operator's requirement for in service inspection at Hinkley Point 'B' power station

    International Nuclear Information System (INIS)

    Outram, J.F.

    The subject is discussed under the following heads: the need for reactor internal inspection (safety; commercial interest); the methods available (man access inspection; remote viewing inspection); experience with man access; experience with remote viewing; reactor outage time -comparison of the two methods; contamination control; conclusions. (U.K.)

  2. 7 CFR 868.61 - How to request appeal inspection service.

    Science.gov (United States)

    2010-01-01

    ... may be made with the Board of Appeals and Review or the field office that performed the appeal... application shall be made: (i) Before the rice has left the place where the inspection being appealed was... inspection be based on: (i) The file sample or (ii) a new sample. However, an appeal inspection shall be...

  3. Development of in-service inspection plans for nuclear components at the Surry 1 nuclear power station

    International Nuclear Information System (INIS)

    Vo, T.V.; Simonen, F.A.; Doctor, S.R.; Smith, B.W.; Gore, B.F.

    1993-01-01

    As part of the nondestructive evaluation reliability program sponsored by the US Nuclear Regulatory Commission at Pacific Northwest Laboratory, a methodology has been developed for establishing in-service inspection priorities of nuclear power plant components. The method uses results of probabilistic risk assessment in conjunction with the techniques of failure modes and effects analysis to identify and prioritize the most risk-important systems and components for inspection at nuclear power plants. Surry nuclear power station unit 1 was selected for demonstrating the methodology. The specific systems selected for analysis were the reactor pressure vessel, the reactor coolant, the low pressure injection including the accumulators, and the auxiliary feedwater. The results provide a risk-based ranking of components that can be used to establish a prioritization of the components and a basis for developing improved in-service inspection plans at nuclear power plants

  4. Centralized vs. decentralized child mental health services.

    Science.gov (United States)

    Adams, M S

    1977-09-01

    One of the basic tenets of the Community Mental Health Center movement is that services should be provided in the consumers' community. Various centers across the country have attempted to do this in either a centralized or decentralized fashion. Historically, most health services have been provided centrally, a good example being the traditional general hospital with its centralized medical services. Over the years, some of these services have become decentralized to take the form of local health centers, health maintenance organizations, community clinics, etc, and now various large mental health centers are also being broken down into smaller community units. An example of each type of mental health facility is delineated here.

  5. Macroeconomic conditions and health: Inspecting the transmission mechanism.

    Science.gov (United States)

    Colombo, Emilio; Rotondi, Valentina; Stanca, Luca

    2018-02-01

    We study the relationship between macroeconomic conditions and self-reported health in a large sample of Italian individuals, focusing on the mediating role played by health behaviors (smoking, alcohol consumption, physical activity, eating habits) and economic stress. Our findings indicate that, overall, higher local unemployment is negatively related to individuals' health conditions. A one percentage point increase in the province-level unemployment rate is associated with a significant increase in the probability of experiencing diabetes (0.03 percentage points), infarction (0.01), ulcer (0.06), cirrhosis (0.01) and nervous disorders (0.07), with a time lag that differs across individual health conditions. Employment status and educational level play a significant role as moderators of these relationships. Eating habits, in addition to economic stress, play a key role as mediators, by enhancing the negative relationship between macroeconomic conditions and health outcomes, while physical exercise is found to play a dampening role. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Homeless health needs: shelter and health service provider perspective.

    Science.gov (United States)

    Hauff, Alicia J; Secor-Turner, Molly

    2014-01-01

    The effects of homelessness on health are well documented, although less is known about the challenges of health care delivery from the perspective of service providers. Using data from a larger health needs assessment, the purpose of this study was to describe homeless health care needs and barriers to access utilizing qualitative data collected from shelter staff (n = 10) and health service staff (n = 14). Shelter staff members described many unmet health needs and barriers to health care access, and discussed needs for other supportive services in the area. Health service providers also described multiple health and service needs, and the need for a recuperative care setting for this population. Although a variety of resources are currently available for homeless health service delivery, barriers to access and gaps in care still exist. Recommendations for program planning are discussed and examined in the context of contributing factors and health care reform.

  7. Activities with regard to research and development of technics for SNR 300 reactor vessel in-service inspection procedures

    International Nuclear Information System (INIS)

    Hoeller, K.; Kirchner, G.; Menck, J.

    1980-01-01

    During the development of SNR 300 in-service inspection equipment, several branches were tested by experiment. In this report special steps for testing of manipulation systems and additional engineering equipment for control systems, such as coupling fluid circuit or camera cooling system are considered more in detail

  8. State-of-practice review of ultrasonic in-service inspection of Class I system piping in commercial nuclear power plants

    International Nuclear Information System (INIS)

    Morris, C.J.; Becker, F.L.

    1982-08-01

    The Pacific Northwest Laboratory conducted a survey to determine the state of practice of ultrasonic in-service inspection of primary system piping in light water reactors. Personnel at four utilities, five inspection organizations, and three domestic reactor manufacturers were interviewed. The intention of the study was to provide a better understanding of the actual practices employed in in-service inspection of primary system piping and of the difficulties encountered

  9. Mental Health Service Delivery Systems and Perceived Qualifications of Mental Health Service Providers in School Settings

    Science.gov (United States)

    Dixon, Decia Nicole

    2009-01-01

    Latest research on the mental health status of children indicates that schools are key providers of mental health services (U.S. Department of Health and Human Services, 2003). The push for school mental health services has only increased as stakeholders have begun to recognize the significance of sound mental health as an essential part of…

  10. 9 CFR 2.128 - Inspection for missing animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Inspection for missing animals. 2.128 Section 2.128 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.128 Inspection for missing animals. Each dealer...

  11. Development of In-Service Inspection system for heat transfer tubes in the primary pressurized water cooler in the HTTR

    Energy Technology Data Exchange (ETDEWEB)

    Shinozaki, Masayuki; Furusawa, Takayuki [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Wada, Shigeyuki

    1999-08-01

    The ISI (In-Service Inspection) system has been developed so as to maintain the structural integrity of heat transfer tubes in the primary pressurized water cooler in the HTTR (High Temperature Engineering Test Reactor). This system consists of eddy current probes, ultra-sonic probes, insertion and extraction units, positioning unit and so on. Verification and performance tests of the developed ISI system were carried out using mock-up heat transfer tubes in the primary pressurized water cooler. The constitution of the system, R and D results of the inspection probes, and verification and performance test results of the ISI system for heat transfer tubes are described in this paper. (author)

  12. Conscientious Objection and Reproductive Health Service Delivery ...

    African Journals Online (AJOL)

    HP

    Lack of access to quality reproductive health services is the main contributor to the high maternal mortality and morbidity in ... such services to clients/patients on moral and/or religious grounds. While the ..... The internal morality of medicine:.

  13. Acceptance of Swedish e-health services

    Directory of Open Access Journals (Sweden)

    Mary-Louise Jung

    2010-11-01

    Full Text Available Mary-Louise Jung1, Karla Loria11Division of Industrial Marketing, e-Commerce and Logistics, Lulea University of Technology, SwedenObjective: To investigate older people’s acceptance of e-health services, in order to identify determinants of, and barriers to, their intention to use e-health.Method: Based on one of the best-established models of technology acceptance, Technology Acceptance Model (TAM, in-depth exploratory interviews with twelve individuals over 45 years of age and of varying backgrounds are conducted.Results: This investigation could find support for the importance of usefulness and perceived ease of use of the e-health service offered as the main determinants of people’s intention to use the service. Additional factors critical to the acceptance of e-health are identified, such as the importance of the compatibility of the services with citizens’ needs and trust in the service provider. Most interviewees expressed positive attitudes towards using e-health and find these services useful, convenient, and easy to use.Conclusion: E-health services are perceived as a good complement to traditional health care service delivery, even among older people. These people, however, need to become aware of the e-health alternatives that are offered to them and the benefits they provide.Keywords: health services, elderly, technology, Internet, TAM, patient acceptance, health-seeking behavior

  14. Fuel channel in-service inspection programs program design for maximum cost effectiveness

    International Nuclear Information System (INIS)

    Van den Brekel, N.C.

    1995-01-01

    Inspection is an integral part of fuel channel life management strategy. Inspection data is used to assess the state of reactor core integrity and provide the information necessary to optimize long term maintenance programs. This paper will provide an overview of the structured approach to developing fuel channel inspection programs within OHN. The inspection programs are designed to balance the resources utilized (cost, outage time, and dose expenditure) with the benefits provided by the inspection data obtained (improved knowledge of component status, degradation mechanisms and rates, etc..). The CANDU community has yet to have a fuel channel operate for a full 30 year design life. Since research programs can not fully simulate reactor operating conditions, inspections become an essential feature of the life management strategy as the components age. Inspection programs often include activities designed to develop predictive capability for long term fuel channel behaviour and provide early warning of changes in behaviour. It should be noted that although this paper addresses the design of fuel channel inspection programs, the basic principles presented can be applied to the design of inspection programs for any major power plant component or system. (author)

  15. Design considerations, tooling and equipment for remote in-service inspection of radioactive piping and pressure vessel systems

    International Nuclear Information System (INIS)

    Schmoker, D.S.; Swannack, D.L.

    1983-01-01

    In-Service Inspection programs are performed to monitor and verify the integrity of a nuclear power plant's primary pressure boundaries. Early detection of abnormal structural or material degradation could preclude serious damage to plant systems. This paper summarizes results obtained in use of remotely-operated nondestructive testing (NDT) equipment for inspection of reactor system components. Experience obtained in operating the Fast Flux Test Facility (FFTF) has provided a basis for field verification of remote NDT equipment designs and has suggested development improvements. Remote Viewing and data gathering systems used include periscopes, borescopes, fiberscopes, hybrid borescopes/fiberscopes, and closed circuit television. A summary of design consideration for inspection equipment and power plant design is presented to achieve improved equipment operation and reduction of plant maintenance downtime

  16. Beliefs concerning the reliability of nuclear power plant in-service inspections; Uskomuksia ydinvoimalaitoksissa suoritettavien tarkastusten luotettavuudesta

    Energy Technology Data Exchange (ETDEWEB)

    Kettunen, J. [VTT Automation, Espoo (Finland)

    1997-01-01

    The aim of the study was to investigate belief systems held by the officials responsible for the planning and supervision of NDT operations within the Finnish nuclear industry. They were asked to express their opinions on (1) the reliability of NDT methods in general, (2) the factors influencing the reliability of in-service inspections, and (3) the degree of reliability of the current inspections operations conducted by means of NDT methods in the Finnish nuclear power plants. Another goal of the study was to assess the adequacy of officials` beliefs (or belief systems). The research data was collected by interviewing representatives from Finnish power companies (Imatran Voima Oy and Teollisuuden Voima Oy), independent inspection organisations, and the Finnish Centre for Radiation and Nuclear Safety (STUK). The adequacy of the beliefs expressed was assessed by means of the results obtained from international NDT reliability studies and on the basis of interviewees` own justification. (refs.).

  17. A retrospective review of how nonconformities are expressed and finalized in external inspections of health-care facilities.

    Science.gov (United States)

    Hovlid, Einar; Høifødt, Helge; Smedbråten, Bente; Braut, Geir Sverre

    2015-09-23

    External inspections are widely used in health care as a means of improving the quality of care. However, the way external inspections affect the involved organization is poorly understood. A better understanding of these processes is important to improve our understanding of the varying effects of external inspections in different organizations. In turn, this can contribute to the development of more effective ways of conducting inspections. The way the inspecting organization states their grounds for noncompliant behavior and subsequently follows up to enforce the necessary changes can have implications for the inspected organization's change process. We explore how inspecting organizations express and state their grounds for noncompliant behavior and how they follow up to enforce improvements. We conducted a retrospective review, in which we performed a content analysis of the documents from 36 external inspections in Norway. Our analysis was guided by Donabedian's structure, process, and outcome model. Deficiencies in the management system in combination with clinical work processes was considered as nonconformity by the inspecting organizations. Two characteristic patterns were identified in the way observations led to a statement of nonconformity: one in which it was clearly demonstrated how deficiencies in the management system could affect clinical processes, and one in which this connection was not demonstrated. Two characteristic patterns were also identified in the way the inspecting organization followed up and finalized their inspection: one in which the inspection was finalized solely based on the documented changes in structural deficiencies addressed in the nonconformity statement, and one based on the documented changes in structural and process deficiencies addressed in the nonconformity statement. External inspections are performed to improve the quality of care. To accomplish this aim, we suggest that nonconformities should be grounded by

  18. Automatic ultrasonic pre-service, and in-service inspection of pressurized components of the primary circuit of nuclear power stations

    International Nuclear Information System (INIS)

    Muller, G.P.; Hallermeier, L.; Heinrich, D.; Grabendorfer, W.; Rebrmann, M.

    1985-01-01

    Ultrasonic pre-service and especially in-service inspection activities on the primary circuit of nuclear power stations form an essential part of the maintenance work that must be performed throughout the lifetime to ensure plant integrity. Consequently, the equipment required to carry out these inspections must be continuously improved in respect of reliability, safety, accuracy and ease of handling in order to minimize disturbances and repairs and reduce radiation exposure of the personnel. The authors' discussion of technique, equipment and performance of automated ultrasonic inspection is based on 15 years of experience in the testing of components of the primary circuit in nuclear power stations. To cover all inspection areas of the RPV of a PWR, four different manipulators are required, two for the closure head, one for the studs and one for the cylindrical shell and bottom closure. The use of the newly developed equipment, which naturally meets all the recommendations of the licensing authorities, allows for the automatic inspection of the components of primary circuit of nuclear power stations and the thus helps to substantially decrease the radiation exposure of the personnel. All the manipulators and their control consoles were designed and manufactured by M.A.N., Nuremberg while the ultrasonic electronic system was developed by Krautkramer, Cologne

  19. Modeling Medical Services with Mobile Health Applications

    Directory of Open Access Journals (Sweden)

    Zhenfei Wang

    2018-01-01

    Full Text Available The rapid development of mobile health technology (m-Health provides unprecedented opportunities for improving health services. As the bridge between doctors and patients, mobile health applications enable patients to communicate with doctors through their smartphones, which is becoming more and more popular among people. To evaluate the influence of m-Health applications on the medical service market, we propose a medical service equilibrium model. The model can balance the supply of doctors and demand of patients and reflect possible options for both doctors and patients with or without m-Health applications in the medical service market. In the meantime, we analyze the behavior of patients and the activities of doctors to minimize patients’ full costs of healthcare and doctors’ futility. Then, we provide a resolution algorithm through mathematical reasoning. Lastly, based on artificially generated dataset, experiments are conducted to evaluate the medical services of m-Health applications.

  20. Use of remote visual in-service inspection on nuclear power plants of the CEGB

    International Nuclear Information System (INIS)

    James, D.W.

    1985-01-01

    The main responsibility of the Remote Inspection Group is the design, development and procurement of the remote visual inspection equipment provided by the Generation Development and Construction Division as part of the extent of the supply for all the Central Electricity Generating Board's (CEGB) advanced gas-cooled reactors (AGR). The paper describes the operation of this equipment, together with the low light-level TV cameras that have been developed for carrying out routine remote visual inspections. The camera, known as the television remote inspection unit multi-purpose head (TRIUMPH), has been designed as a series of modules. With this system it is possible to take advantage of improvements in a particular part of the camera system and to arrange to backfit an improved module to existing TRIUMPHs. To minimize the time for carrying out routine inspections during shutdown, the AGRs have been provided with storage training and test facilities. These facilities are provided with full size mock-ups of the reactor internals so that the inspection equipment can be tested and the operating staff trained before the equipment is used on the reactor. One of the other responsibilities of the Remote Inspection Group is to carry out specific power plant remote visual inspections which are required to minimize costly plant shutdowns and construction delays. Examples are given of successful inspections that have been carried out. Over 12 years' experience has now been obtained in carrying out, at short notice, difficult inspections which involve tortuous access routes. The CEGB now holds a wide range of fibrescope and small TV cameras, together with the equipment for placing the viewing device in the correct location. A number of special fibrescopes have been developed for specific inspection needs and details of these, together with other fibrescopes owned by the CEGB, are provided. (author)

  1. In-service inspection of electronics components, circuits and nuclear radiation detectors

    International Nuclear Information System (INIS)

    Darbhe, M.D.

    2002-01-01

    A nuclear reactor is a complex process plant. Like a nuclear power plant, the research reactors also employ various nuclear and process systems, the scope and number of such systems being plant-specific. In-service inspection of these systems is an important requirement and is applied at various levels of their constituent units such as detectors, electronics components, circuits and integrated systems. The sensors used cover a wide range such as neutronic, radiation, process (pressure, temperature, flow, level) and many others. The present discussion is limited to neutronic and radiation detectors. The electronic components used normally consist of passive components like resistors, capacitors, semiconductor components like diodes, transistors, analog integrated circuits and digital integrated circuits and electromagnetic relays, to name a few. In order to have a comprehensive surveillance and ISI plan, over the entire plant life, it is necessary to understand various mechanisms, which degrade the performance of these systems. These are discussed initially and later various ISI methods that are used on component-circuit or system level, to ensure optimum system performance, are discussed. The computerised systems, because of hardware and software considerations, have to be given special attention, and the same are discussed briefly

  2. Ultrasonic inspection

    International Nuclear Information System (INIS)

    Satittada, Gannaga

    1984-01-01

    Ultrasonic inspection is one of the most widely used methods for nondestructive inspection. The beam of high-frequency sound wave, ultrasonic wave, is introduced into the material. It travels through the material with some attendant loss of energy and can be reflected at interfaces. The reflected beam is detected and analyzed. Ultrasonic inspection is used to detect flaws in metal parts as well as in welded, brazed and bonded joints during research work and developing production and service. It is also used to detect and locate porosity, pipe, and flakes. In addition, it can be used for the measurement of metal thickness. Ultrasonic inspection is therefore used for quality control and material inspection in all major industries

  3. X-ray tomographic in-service inspection of girth welds - The European project TomoWELD

    Energy Technology Data Exchange (ETDEWEB)

    Ewert, Uwe, E-mail: uwe.ewert@bam.de; Redmer, Bernhard, E-mail: uwe.ewert@bam.de; Walter, David, E-mail: uwe.ewert@bam.de; Thiessenhusen, Kai-Uwe, E-mail: uwe.ewert@bam.de; Bellon, Carsten, E-mail: uwe.ewert@bam.de [BAM Bundesanstalt für Materialforschung, Berlin (Germany); Nicholson, P. Ian, E-mail: ian.nicholson@twi.co.uk [TWI Technology Centre Wales, Port Talbot (United Kingdom); Clarke, Alan L. [TWI Technology Centre Wales, Port Talbot (United Kingdom); Finke-Härkönen, Klaus-Peter, E-mail: klaus.harkonen@ajat.fi [Oy AJAT Ltd., Helsinki (Finland)

    2015-03-31

    The new standard 'ISO 17636-2:2013: Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors', defines the practice for radiographic inspection of welded pipes for manufacturing and in-service inspection. It is applied in Europe for inspections of pipe welds in nuclear power plants as well as in chemical plants and allows a faster inspection with digital detector arrays (DDA) than with film. Nevertheless, it does not allow the evaluation of the depth and shape of volumetric and planar indications. In 2001 a planar tomography scanner, TomoCAR, was introduced for mechanized radiographic testing (RT) inspection and non-destructive measurement of cross sections. The project TomoWELD is based on a new concept of the scan geometry, an enhanced GPU based reconstruction, and the application of a new generation of photon counting DDAs based on CdTe crystal CMOS hybrids. The new detector permits the selection of energy thresholds to obtain an optimum energy range and reduction of the influence of scattered radiation. The concept and first measurements are presented. Flaw depth and shape of volumetric and planar irregularities can be determined.

  4. X-ray tomographic in-service inspection of girth welds - The European project TomoWELD

    International Nuclear Information System (INIS)

    Ewert, Uwe; Redmer, Bernhard; Walter, David; Thiessenhusen, Kai-Uwe; Bellon, Carsten; Nicholson, P. Ian; Clarke, Alan L.; Finke-Härkönen, Klaus-Peter

    2015-01-01

    The new standard 'ISO 17636-2:2013: Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors', defines the practice for radiographic inspection of welded pipes for manufacturing and in-service inspection. It is applied in Europe for inspections of pipe welds in nuclear power plants as well as in chemical plants and allows a faster inspection with digital detector arrays (DDA) than with film. Nevertheless, it does not allow the evaluation of the depth and shape of volumetric and planar indications. In 2001 a planar tomography scanner, TomoCAR, was introduced for mechanized radiographic testing (RT) inspection and non-destructive measurement of cross sections. The project TomoWELD is based on a new concept of the scan geometry, an enhanced GPU based reconstruction, and the application of a new generation of photon counting DDAs based on CdTe crystal CMOS hybrids. The new detector permits the selection of energy thresholds to obtain an optimum energy range and reduction of the influence of scattered radiation. The concept and first measurements are presented. Flaw depth and shape of volumetric and planar irregularities can be determined

  5. Foodborne Outbreaks Reported to the U.S. Food Safety and Inspection Service, Fiscal Years 2007 through 2012.

    Science.gov (United States)

    Robertson, Kis; Green, Alice; Allen, Latasha; Ihry, Timothy; White, Patricia; Chen, Wu-San; Douris, Aphrodite; Levine, Jeoffrey

    2016-03-01

    The U.S. Department of Agriculture's Food Safety and Inspection Service (FSIS) works closely with federal, state, and local public health partners to investigate foodborne illness outbreaks associated with its regulated products. To provide insight into outbreaks associated with meat and poultry, outbreaks reported to FSIS during fiscal years 2007 through 2012 were evaluated. Outbreaks were classified according to the strength of evidence linking them to an FSIS-regulated product and by their epidemiological, etiological, and vehicle characteristics. Differences in outbreak characteristics between the period 2007 through 2009 and the period 2010 through 2012 were assessed using a chi-square test or Mann-Whitney U test. Of the 163 reported outbreaks eligible for analysis, 89 (55%) were identified as possibly linked to FSIS-regulated products and 74 (45%) were definitively linked to FSIS-regulated products. Overall, these outbreaks were associated with 4,132 illnesses, 772 hospitalizations, and 19 deaths. Shiga toxin-producing Escherichia coli was associated with the greatest proportion of reported outbreaks (55%), followed by Salmonella enterica (34%) and Listeria monocytogenes (7%). Meat and poultry products commercially sold as raw were linked to 125 (77%) outbreaks, and of these, 105 (80%) involved beef. Over the study period, the number of reported outbreaks definitively linked to FSIS-regulated products (P = 0.03) declined, while the proportion of culture-confirmed cases (P = 0.0001) increased. Our findings provide insight into the characteristics of outbreaks associated with meat and poultry products.

  6. Defence Health Service Mentoring Program Evaluation 2001

    National Research Council Canada - National Science Library

    Highfield, Jane

    2002-01-01

    The Defense Health Services (DHS) Steering Committee has considered the concept of Mentoring as part of an effort to assist in the development of future health leaders in the Australian Defense Force (ADF...

  7. Mental Health Services in Southern Sudan

    African Journals Online (AJOL)

    Siegal_D

    Editorial: Mental Health Services in Southern Sudan – a. Vision for the Future. Major mental illness exists all over the world with a remarkably .... minus one or both parents. ... There he taught and inspired child health professionals from all over.

  8. Discussion of in-service inspection planning for nuclear power plants

    International Nuclear Information System (INIS)

    Aoki, Takayuki; Takagi, Toshiyuki

    2012-01-01

    For creating an inspection plan for industrial plants like nuclear power plants, it is necessary to have a well-grounded basis. Therefore, this paper proposes a method for determining the following three elements of such a plan: the equipment to be inspected, the inspection method to be adopted, and the timing of its implementation using a scientific approach. The key idea is to analyze the components of the plan by employing the understanding of cancer detection and diagnosis in medical science and also to take an approach of creating a plan based on the characteristic features of the component and its aging degradation mode, the performance of the inspection method, and the relationship between the two. Taking all the above into account, the factors to be considered and the best way for inspecting the plants are presented in this paper. (author)

  9. Mental health service delivery following health system reform in Colombia.

    Science.gov (United States)

    Romero-González, Mauricio; González, Gerardo; Rosenheck, Robert A

    2003-12-01

    In 1993, Colombia underwent an ambitious and comprehensive process of health system reform based on managed competition and structured pluralism, but did not include coverage for mental health services. In this study, we sought to evaluate the impact of the reform on access to mental health services and whether there were changes in the pattern of mental health service delivery during the period after the reform. Changes in national economic indicators and in measures of mental health and non-mental health service delivery for the years 1987 and 1997 were compared. Data were obtained from the National Administrative Department of Statistics of Colombia (DANE), the Department of National Planning and Ministry of the Treasury of Colombia, and from national official reports of mental health and non-mental health service delivery from the Ministry of Health of Colombia for the same years. While population-adjusted access to mental health outpatient services declined by -2.7% (-11.2% among women and +5.8% among men), access to general medical outpatient services increased dramatically by 46%. In-patient admissions showed smaller differences, with a 7% increase in mental health admissions, as compared to 22.5% increase in general medical admissions. The health reform in Colombia imposed competition across all health institutions with the intention of encouraging efficiency and financial autonomy. However, the challenge of institutional survival appears to have fallen heavily on mental health care institutions that were also expected to participate in managed competition, but that were at a serious disadvantage because their services were excluded from the compulsory standardized package of health benefits. While the Colombian health care reform intended to close the gap between those who had and those who did not have access to health services, it appears to have failed to address access to specialized mental health services, although it does seem to have promoted a

  10. Mapping health outcomes from ecosystem services

    NARCIS (Netherlands)

    Keune, Hans; Oosterbroek, Bram; Derkzen, Marthe; Subramanian, Suneetha; Payyappalimana, Unnikrishnan; Martens, Pim; Huynen, Maud; Burkhard, Benjamin; Maes, Joachim

    The practice of mapping ecosystem services (ES) in relation to health outcomes is only in its early developing phases. Examples are provided of health outcomes, health proxies and related biophysical indicators. This chapter also covers main health mapping challenges, design options and

  11. Utilization of maternal health services in rural primary health centers ...

    African Journals Online (AJOL)

    Utilization of maternal health services in rural primary health centers in Sub- Saharan Africa. ... their pregnancies were normal during antenatal care visits, hostile attitude of health workers, poverty and mode of payment. Majority of the PHCs provided antenatal, normal delivery, and post natal services. Rural mothers lacked ...

  12. Acceptance of Swedish e-health services

    Science.gov (United States)

    Jung, Mary-Louise; Loria, Karla

    2010-01-01

    Objective: To investigate older people’s acceptance of e-health services, in order to identify determinants of, and barriers to, their intention to use e-health. Method: Based on one of the best-established models of technology acceptance, Technology Acceptance Model (TAM), in-depth exploratory interviews with twelve individuals over 45 years of age and of varying backgrounds are conducted. Results: This investigation could find support for the importance of usefulness and perceived ease of use of the e-health service offered as the main determinants of people’s intention to use the service. Additional factors critical to the acceptance of e-health are identified, such as the importance of the compatibility of the services with citizens’ needs and trust in the service provider. Most interviewees expressed positive attitudes towards using e-health and find these services useful, convenient, and easy to use. Conclusion: E-health services are perceived as a good complement to traditional health care service delivery, even among older people. These people, however, need to become aware of the e-health alternatives that are offered to them and the benefits they provide. PMID:21289860

  13. Outsourcing occupational health services. Critical elements.

    Science.gov (United States)

    Dyck, Dianne

    2002-02-01

    Successful management of an outsourcing relationship produces a highly interactive, flexible relationship between two organizations. The unique skills and resources of the service provider can be leveraged by the purchasing organization to achieve its business goals. Occupational and environmental health nurses can orchestrate this process and implement this important management tool in the provision of quality occupational health services.

  14. Home Health Care: Services and Cost

    Science.gov (United States)

    Widmer, Geraldine; And Others

    1978-01-01

    Findings from a study of home care services in one New York district document the value and relatively modest costs of home health care for the chronically ill and dependent elderly. Professional nurses coordinated the care, but most of the direct services were provided by home health aides and housekeepers. (MF)

  15. An international survey of in-service inspection experience with prestressed concrete pressure vessels and containments for nuclear reactors

    International Nuclear Information System (INIS)

    1982-04-01

    An international survey is presented of experience obtained from the in-service surveillance of prestressed concrete pressure vessels and containments for nuclear reactors. Some information on other prestressed concrete structures is also given. Experience has been gained during the working life of such structures in Western Europe and the USA over the years since 1967. For each country a summary is given of the nuclear programme, national standards and Codes of Practice, and the detailed in-service inspection programme. Reports are then given of the actual experience obtained from the inspection programme and the methods of measurement, examination and reporting employed in each country. A comprehensive bibliography of over 100 references is included. The appendices contain information on nuclear power stations which are operating, under construction or planned worldwide and which employ either prestressed concrete pressure vessels or containments. (U.K.)

  16. Program for establishing long-time flight service performance of composite materials in the center wing structure of C-130 aircraft. Phase 5: flight service and inspection. Final report

    International Nuclear Information System (INIS)

    Kizer, J.A.

    1981-10-01

    Inspections of the C-130 composite-reinforced center wings were conducted over the flight service monitoring period of more than six years. Twelve inspections were conducted on each of the two C-130H airplanes having composite reinforced center wing boxes. Each inspection consisted of visual and ultrasonic inspection of the selective boron-epoxy reinforced center wings which included the inspection of the boron-epoxy laminates and the boron-epoxy reinforcement/aluminum structure adhesive bondlines. During the flight service monitoring period, the two C-130H aircraft accumulated more than 10,000 flight hours and no defects were detected in the inspections over this period. The successful performance of the C-130H aircraft with composite-reinforced center wings allowed the transfer of the responsibilities of inspecting and maintaining these two aircraft to the U. S. Air Force

  17. RIBA Project - Risk-Informed approach for In-Service Inspection of Nuclear Power Plant Components. Project summary

    International Nuclear Information System (INIS)

    Lidbury, D.; Smith, G.

    2001-12-01

    The need for a European review of a Risk-Informed Approach for In-Service Inspection of Nuclear Power Plant Components (RIBA) was identified in 1998. This was as a priority item in the programme of activities conducted in the framework of the Council Resolutions of 22 July 1975 and of 18 June 1992 on the Technological Problems of Nuclear Safety. The RIBA Project was established in November 1999 as a 24-month Study Contract funded by the European Commission within the frame of the former DG XI WGCS (Working Group on Codes and Standards). The Study Contract was subsequently managed for the EC by DG TREN. The participants in RIBA were Serco Assurance (project coordinator), Ringhals AB, EDF, Tecnatom SA and Westinghouse Electric Europe. The work is presented in a summary report with the detailed results contained in three companion reports as follows: main conclusions and recommendations, Review of Existing Risk-Informed Methodologies, A Comparative Study of Risk-Informed In-Service Inspection Applications, Conclusions and Recommendations for Risk-Informed in-service inspection methodology applied to Nuclear Power Plants in Europe. (author)

  18. Integrating mental health services: the Finnish experience

    Directory of Open Access Journals (Sweden)

    Ville Lehtinen

    2001-06-01

    Full Text Available The aim of this paper is to give a short description of the most important developments of mental health services in Finland during the 1990s, examine their influences on the organisation and provision of services, and describe shortly some national efforts to handle the new situation. The Finnish mental health service system experienced profound changes in the beginning of the 1990s. These included the integration of mental health services, being earlier under own separate administration, with other specialised health services, decentralisation of the financing of health services, and de-institutionalisation of the services. The same time Finland underwent the deepest economic recession in Western Europe, which resulted in cut-offs especially in the mental health budgets. Conducting extensive national research and development programmes in the field of mental health has been one typically Finnish way of supporting the mental health service development. The first of these national programmes was the Schizophrenia Project 1981–97, whose main aims were to decrease the incidence of new long-term patients and the prevalence of old long-stay patients by developing an integrated treatment model. The Suicide Prevention Project 1986–96 aimed at raising awareness of this special problem and decreasing by 20% the proportionally high suicide rate in Finland. The National Depression Programme 1994–98 focused at this clearly increasing public health concern by several research and development project targeted both to the general population and specifically to children, primary care and specialised services. The latest, still on-going Meaningful Life Programme 1998–2003 which main aim is, by multi-sectoral co-operation, to improve the quality of life for people suffering from or living with the threat of mental disorders. Furthermore, the government launched in 1999 a new Goal and Action Programme for Social Welfare and Health Care 2000–2003, in

  19. Health Services Cost Analyzing in Tabriz Health Centers 2008

    Directory of Open Access Journals (Sweden)

    Massumeh gholizadeh

    2015-08-01

    Full Text Available Background and objectives : Health Services cost analyzing is an important management tool for evidence-based decision making in health system. This study was conducted with the purpose of cost analyzing and identifying the proportion of different factors on total cost of health services that are provided in urban health centers in Tabriz. Material and Methods : This study was a descriptive and analytic study. Activity Based Costing method (ABC was used for cost analyzing. This cross–sectional survey analyzed and identified the proportion of different factors on total cost of health services that are provided in Tabriz urban health centers. The statistical population of this study was comprised of urban community health centers in Tabriz. In this study, a multi-stage sampling method was used to collect data. Excel software was used for data analyzing. The results were described with tables and graphs. Results : The study results showed the portion of different factors in various health services. Human factors by 58%, physical space 8%, medical equipment 1.3% were allocated with high portion of expenditures and costs of health services in Tabriz urban health centers. Conclusion : Based on study results, since the human factors included the highest portion of health services costs and expenditures in Tabriz urban health centers, balancing workload with staff number, institutionalizing performance-based management and using multidisciplinary staffs may lead to reduced costs of services. ​

  20. Development of automated ultrasonic device for in-service inspection of ABWR pressure vessel bottom head

    International Nuclear Information System (INIS)

    Kojima, Y.; Matsuyama, A.

    1995-01-01

    An automated device and its controller have been developed for the bottom head weld examination of pressure vessel of Advanced Boiling Water Reactor (ABWR). The internal pump casings and the housings of control rod prevent a conventional ultrasonic device from scanning the required inspection zone. With this reason, it is required to develop a new device to examine the bottom head area of ABWR. The developed device is characterized by the following features. (1) Composed of a mother vehicle and a compact inspection vehicle. They are connected only by an electric wire without using the conventional arm mechanism. (2) The mother vehicle travels on a track and lift up the inspection vehicle to the vessel. (3) The mother vehicle can automatically attach the inspection vehicle to the bottom head, and detach the inspection vehicle from it. (4) Collision avoidance control function with a touch sensor is installed at the front of the inspection vehicle. The device was successfully demonstrated using a mock-up of reactor pressure vessel

  1. School Mental Health Resources and Adolescent Mental Health Service Use

    Science.gov (United States)

    Green, Jennifer Greif; McLaughlin, Katie A.; Alegría, Margarita; Costello, E. Jane; Gruber, Michael J.; Hoagwood, Kimberly; Leaf, Philip J.; Olin, Serene; Sampson, Nancy A,; Kessler, Ronald C.

    2014-01-01

    Objective Although schools are identified as critical for detecting youth mental disorders, little is known about whether the number of mental health providers and types of resources they offer influence student mental health service use. Such information could inform the development and allocation of appropriate school-based resources to increase service use. This paper examines associations of school resources with past-year mental health service use among students with 12-month DSM-IV mental disorders. Method Data come from the U.S. National Comorbidity Survey Adolescent Supplement (NCS-A), a national survey of adolescent mental health that included 4,445 adolescent-parent pairs in 227 schools in which principals and mental health coordinators completed surveys about school resources-policies for addressing student emotional problems. Adolescents and parents completed the Composite International Diagnostic Interview and reported mental health service use across multiple sectors. Multilevel multivariate regression was used to examine associations of school mental health resources and individual-level service use. Results Roughly half (45.3%) of adolescents with a 12-month DSM-IV disorder received past-year mental health services. Substantial variation existed in school resources. Increased school engagement in early identification was significantly associated with mental health service use for adolescents with mild/moderate mental and behavior disorders. The ratio of students-to-mental health providers was not associated with overall service use, but was associated with sector of service use. Conclusions School mental health resources, particularly those related to early identification, may facilitate mental health service use and influence sector of service use for youths with DSM disorders. PMID:23622851

  2. Occupational Health Services Integrated in Primary Health Care in Iran.

    Science.gov (United States)

    Rafiei, Masoud; Ezzatian, Reza; Farshad, Asghar; Sokooti, Maryam; Tabibi, Ramin; Colosio, Claudio

    2015-01-01

    A healthy workforce is vital for maintaining social and economic development on a global, national and local level. Around half of the world's people are economically active and spend at least one third of their time in their place of work while only 15% of workers have access to basic occupational health services. According to WHO report, since the early 1980s, health indicators in Iran have consistently improved, to the extent that it is comparable with those in developed countries. In this paper it was tried to briefly describe about Health care system and occupational Health Services as part of Primary Health care in Iran. To describe the health care system in the country and the status of occupational health services to the workers and employers, its integration into Primary Health Care (PHC) and outlining the challenges in provision of occupational health services to the all working population. Iran has fairly good health indicators. More than 85 percent of the population in rural and deprived regions, for instance, have access to primary healthcare services. The PHC centers provide essential healthcare and public-health services for the community. Providing, maintaining and improving of the workers' health are the main goals of occupational health services in Iran that are presented by different approaches and mostly through Workers' Houses in the PHC system. Iran has developed an extensive network of PHC facilities with good coverage in most rural areas, but there are still few remote areas that might suffer from inadequate services. It seems that there is still no transparent policy to collaborate with the private sector, train managers or provide a sustainable mechanism for improving the quality of services. Finally, strengthening national policies for health at work, promotion of healthy work and work environment, sharing healthy work practices, developing updated training curricula to improve human resource knowledge including occupational health

  3. Health Worker Opinion/Perception of Health Services provided to ...

    African Journals Online (AJOL)

    Nancy Kamau

    VDH Industrial Hygiene CC.PO. Box ... conducted to establish relations of mining activities to human health at Selebi. Phikwe is called for. .... Table 1: Demographic data of health service providers and patients in the study area. Medical ...

  4. Assessing the performance of mental health service facilities for meeting patient priorities and health service responsiveness.

    Science.gov (United States)

    Bramesfeld, A; Stegbauer, C

    2016-10-01

    The World Health Organisation has defined health service responsiveness as one of the key-objectives of health systems. Health service responsiveness relates to the ability to respond to service users' legitimate expectations on non-medical issues when coming into contact with the services of a healthcare system. It is defined by the areas showing respect for persons and patient orientation. Health service responsiveness is particularly relevant to mental health services, due to the specific vulnerability of mental health patients but also because it matches what mental health patients consider as good quality of care as well as their priorities when seeking healthcare. As (mental) health service responsiveness applies equally to all concerned services it would be suitable as a universal indicator for the quality of services' performance. However, performance monitoring programs in mental healthcare rarely assess health service performance with respect to meeting patient priorities. This is in part due of patient priorities as an outcome being underrepresented in studies that evaluate service provision. The lack of studies using patient priorities as outcomes transmits into evidence based guidelines and subsequently, into underrepresentation of patient priorities in performance monitoring. Possible ways out of this situation include more intervention studies using patient priorities as outcome, considering evidence from qualitative studies in guideline development and developing performance monitoring programs along the patient pathway and on key-points of relevance for service quality from a patient perspective.

  5. Health and health services in Central America.

    Science.gov (United States)

    Garfield, R M; Rodriguez, P F

    1985-08-16

    Despite rapid economic growth since World War II, health conditions improved only slowly in most of Central America. This is a result of poor medical, social, and economic infrastructure, income maldistribution, and the poor utilization of health investments. The economic crisis of the 1980s and civil strife have further endangered health in the region. Life expectancy has fallen among men in El Salvador and civil strife has become the most common cause of death in Guatemala, Nicaragua, and El Salvador. Large-scale US assistance has done little to improve conditions, and refugees continue to pour into North America. It is estimated that there are more than a million refugees within Central America, while a million have fled to the United States. Costa Rica and Nicaragua are partial exceptions to this dismal health picture. An effective approach to the many health problems in Central America will require joint planning and cooperation among all countries in the region.

  6. The 1978 first in-service inspection of the reactor pressure vessel of the second unit of the Greifswald nuclear power plant

    International Nuclear Information System (INIS)

    Pastor, D.; Busch, R.; Hildebrandt, E.; Redlich, K.H.

    1979-01-01

    The reactor pressure vessel and the primary coolant circuit of the second 440-MW(e) unit of the Greifswald nuclear power plant were subjected to an in-service inspection. Extent of the inspection, development and construction of a reactor inspection container as well as the nondestructive materials testing methods used are described. Further, problems of performing the inspection, such as needs of time and personnel and radiation exposure, are considered. Finally, it is stated that the reactor pressure vessel was in safe operating state. (author)

  7. Health Services management. Health Service use of ionising radiations

    International Nuclear Information System (INIS)

    1989-12-01

    This circular consolidates and updates advice on the statutory and management responsibilities of Health Authorities in relation to the use of ionising radiations (including radioactive substances) on premises controlled by them and/or by persons employed by them (author)

  8. Application of risk-informed in-service inspection approach. Pilot study on low pressure emergency core cooling system of NPP Temelin

    International Nuclear Information System (INIS)

    Horacek, L.; Palyza, J.; Zdarek, J.; Vizina, M.

    2004-01-01

    In-service inspection (ISI) programme of piping systems based on Riskinformed In-service Inspections (RI-ISI) approach represents for the WWER NPP licensee first overall systematic conceptual solution of the problems associated with design and design modifications of ISI programme for piping systems. The approach enables to consider possible savings and comparison of in-service inspection programmes according to more objective criteria including those calculated in PSA, in contrast to present much empiric experience collected by manufacturers, operators and ISI vendors in the past. Service experience has shown limited correlation between the deterministic ISI requirements and actual field failures or degradation mechanisms. Where field failures have been observed in piping, they have generally been due to either material concerns (e.g., Intergranular Stress Corrosion Cracking) or stress/cycling mechanisms not identified in the original design basis documents (e.g., thermal stratification), and therefore would not be selected for inspection under current requirements. Risk-informed in-service inspections represent integrated multidisciplinary approach to the in-service inspection programme fulfilling the enhanced requirements of the Czech Regulatory Body (SUJB) for defence in depth concept applied to weld joints of safety related components, application of qualified NDT methods/techniques and introducing of inspections for cause approach. Inspections for cause take into account analysis of both active and potential degradation mechanisms specific to piping system concerned. Simultaneously, this approach enables the licensee to reach, in cases justified from safety point of view, economic savings resulting from lowering of both number and extent of performed in-service inspections and optimisation of their performance. RI ISI pilot study based in majority on EPRI methodology implemented for WWER type reactors has been performed for LP ECCS (Low Pressure Emergency

  9. Including customers in health service design.

    Science.gov (United States)

    Perrott, Bruce E

    2013-01-01

    This article will explore the concept and meaning of codesign as it applies to the delivery of health services. The results of a pilot study in health codesign will be used as a research based case discussion, thus providing a platform to suggest future research that could lead to building more robust knowledge of how the consumers of health services may be more effectively involved in the process of developing and delivering the type of services that are in line with expectations of the various stakeholder groups.

  10. Evaluation and improvement in nondestructive examination (NDE) reliability for in-service inspection of light water reactors

    International Nuclear Information System (INIS)

    Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Simonen, F.A.; Spanner, J.C.; Taylor, T.T.

    1988-01-01

    The evaluation and improvement of NDE Reliability for In-service Inspection (ISI) of Light Water Reactors (NDE Reliability) Program at Pacific Northwest Laboratory (PNL) was established to determine the reliability of current ISI techniques and to develop recommendations that will ensure a suitably high inspection reliability. The objectives of this NRC program are to: determine the reliability of ultrasonic ISI performed on commercial light-water reactor (LWR) primary systems; determine the impact of NDE unreliability on system safety and determine the level of inspection reliability required to ensure a suitably low failure probability using probabilistic fracture mechanics analysis; evaluate the degree of reliability improvement that could be achieved using improved and advanced NDE technique; and recommend revisions to ASME Code, Section XI, and Regulatory Requirements, based on material properties, service conditions, and NDE uncertainties, that will ensure suitably low failure probabilities. The program consists of three basic tasks: a Piping task, a Pressure Vessel task, and an Evaluation and Improvement in NDE Reliability task. The major efforts were concentrated in the Piping task and the Evaluation and Improvement in NDE Reliability task

  11. Service network analysis for agricultural mental health

    Directory of Open Access Journals (Sweden)

    Fuller Jeffrey D

    2009-05-01

    Full Text Available Abstract Background Farmers represent a subgroup of rural and remote communities at higher risk of suicide attributed to insecure economic futures, self-reliant cultures and poor access to health services. Early intervention models are required that tap into existing farming networks. This study describes service networks in rural shires that relate to the mental health needs of farming families. This serves as a baseline to inform service network improvements. Methods A network survey of mental health related links between agricultural support, health and other human services in four drought declared shires in comparable districts in rural New South Wales, Australia. Mental health links covered information exchange, referral recommendations and program development. Results 87 agencies from 111 (78% completed a survey. 79% indicated that two thirds of their clients needed assistance for mental health related problems. The highest mean number of interagency links concerned information exchange and the frequency of these links between sectors was monthly to three monthly. The effectiveness of agricultural support and health sector links were rated as less effective by the agricultural support sector than by the health sector (p Conclusion Aligning with agricultural agencies is important to build effective mental health service pathways to address the needs of farming populations. Work is required to ensure that these agricultural support agencies have operational and effective links to primary mental health care services. Network analysis provides a baseline to inform this work. With interventions such as local mental health training and joint service planning to promote network development we would expect to see over time an increase in the mean number of links, the frequency in which these links are used and the rated effectiveness of these links.

  12. Emergency Health Services Selected Bibliography.

    Science.gov (United States)

    Health Services and Mental Health Administration (DHEW), Bethesda, MD.

    This annotated bibliography contains books, journal articles, visual aids, and other documents pertaining to emergency health care, which are organized according to: (1) publications dealing with day-to-day health emergencies that occur at home, work, and play, (2) documents that will help communities prepare for emergencies, including natural…

  13. Health services for children in western Europe.

    Science.gov (United States)

    Wolfe, Ingrid; Thompson, Matthew; Gill, Peter; Tamburlini, Giorgio; Blair, Mitch; van den Bruel, Ann; Ehrich, Jochen; Pettoello-Mantovani, Massimo; Janson, Staffan; Karanikolos, Marina; McKee, Martin

    2013-04-06

    Western European health systems are not keeping pace with changes in child health needs. Non-communicable diseases are increasingly common causes of childhood illness and death. Countries are responding to changing needs by adapting child health services in different ways and useful insights can be gained through comparison, especially because some have better outcomes, or have made more progress, than others. Although overall child health has improved throughout Europe, wide inequities remain. Health services and social and cultural determinants contribute to differences in health outcomes. Improvement of child health and reduction of suffering are achievable goals. Development of systems more responsive to evolving child health needs is likely to necessitate reconfiguring of health services as part of a whole-systems approach to improvement of health. Chronic care services and first-contact care systems are important aspects. The Swedish and Dutch experiences of development of integrated systems emphasise the importance of supportive policies backed by adequate funding. France, the UK, Italy, and Germany offer further insights into chronic care services in different health systems. First-contact care models and the outcomes they deliver are highly variable. Comparisons between systems are challenging. Important issues emerging include the organisation of first-contact models, professional training, arrangements for provision of out-of-hours services, and task-sharing between doctors and nurses. Flexible first-contact models in which child health professionals work closely together could offer a way to balance the need to provide expertise with ready access. Strategies to improve child health and health services in Europe necessitate a whole-systems approach in three interdependent systems-practice (chronic care models, first-contact care, competency standards for child health professionals), plans (child health indicator sets, reliable systems for capture and

  14. Structural features and in-service inspection of the LTHR-200 pressure vessel

    International Nuclear Information System (INIS)

    Xiong Dunshi; He Shuyan; Liu Junjie; Yu Suyuan

    1993-01-01

    LTHR-200 is a low temperature district-heating reactor. It adopts double-shell design pressure vessel and metal containment. Because of the safety and structural features of the reactor, the in-service inspection of the pressure vessel can be simplified greatly. LTHR-200 is an integrated arrangement. Both its core components and the main heat exchangers are contained in the reactor pressure vessel. The coolant of the main loop is run by a full-power natural circulation and there need no main pumps and pipes. Thus, the reactor pressure vessel constitutes the pressure boundary of the reactor's main loop coolant. In regard to these features, a small-sized containment is designed for the reactor. The metal safety container with a small volume is placed closely around the reactor pressure vessel. Outside the metal containment, there is a large reinforced concrete construction for the reactor. Their main operation and design parameters are as follows: The pressure vessel: operation pressure = 2.4 MPa; design pressure = 3.0 MPa; design temperature = 250 deg C; 40 year fast neutron (E>1MeV) fluence in the belt-line region = < 10E16n/cm; internal diameter = 5000 mm; material SA516-70; shell thickness 65 mm; The metal containment: maximum operation pressure = 1.8 MPa; design pressure = 1.8 MPa; design temperature = 250 deg. C; upper internal diameter 7000 mm; lower internal diameter = 5600 mm; material = SA516-70; shell thickness, upper part = 80 mm; lower part = 50 mm. All penetrating pipes through the pressure vessel are located at the top penetration section of the shell. All the internal diameters of penetrating pipes are less than 50 mm. Inside and outside the metal containment wall respectively, isolating valves are connected to the reactor coolant pipe which passes through the containment. These two isolating valves use different driving methods. Every penetrating part of the reactor construction uses a proper form of structure according to safety requirements

  15. health services in South Africa

    African Journals Online (AJOL)

    2013-06-03

    Jun 3, 2013 ... K B Rebe,1 MB ChB, FCP (SA), DTM&H, Dip HIV Man (SA); G De Swardt,1 BA, MW; H Struthers,1 MBA; ... the country's previous National Strategic Plan for HIV and AIDS,. STIs and ..... Marketing MSM-appropriate services is.

  16. Occupational health and safety services

    NARCIS (Netherlands)

    Kwantes, J.H.; Hooftman, W.; Michiel, F.

    2014-01-01

    The position, role and aim of the protective and preventive services (article 7 of the Framework directive (89/391/EEC within the legal OSH-system will be the focus point of this article. Article 13 of the EU Treaty gives the EU the possibility to draft a legal framework on occupational safety and

  17. Proposals for in-service inspection and monitoring of selected components located within or part of the primary containment of sodium cooled fast reactors

    International Nuclear Information System (INIS)

    Bolt, P.R.

    1976-01-01

    Design and operational experience of CEGB gas cooled reactors and certain overseas reactor plant is reviewed in relation to in-service inspection and monitoring capabilities. Design guidelines and preliminary proposals are given for in-service inspection and monitoring of selected components located within or part of the primary containment of sodium cooled fast reactors. Specific comments are made on the items of further design and development work believed to be necessary

  18. [Sociological aspects of health service access points].

    Science.gov (United States)

    Lecarpentier, Mariana

    The work of health service access points highlights the process of exclusion through marginalisation, the phenomenon of precarity and anthropological tensions between hospitality and inhospitality or between the desirable and undesirable. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  19. Health Service use of ionising radiations: Guidance

    International Nuclear Information System (INIS)

    1995-01-01

    This booklet gives outline guidance on the use of ionising radiations in the Health Service in the United Kingdom. Extensive reference is made to documents where more detailed information may be found. The guidance covers general advice on the medical use of ionising radiations, statutory requirements, and guidance on selected Health Service issues such as patient identification procedures, information management systems, deviations from prescribed radiation dose, imaging and radiotherapy. (57 references) (U.K.)

  20. Health Services Approach to the Communication Audit

    OpenAIRE

    Tereza Balcarová

    2014-01-01

    This paper deals with the use of a communication audit as a tool for evaluating the effectiveness of public relations within health services. The research was conducted within healthcare institutions operating in the Czech Republic. Areas of research questions were focused on these aspects of health services: The approach to the implementation of a communication audit: Is the communication audit tied to the level of public relations effectiveness evaluation? Is the approach influenced by publ...

  1. 77 FR 66578 - Cancellation of Indianapolis Grain Inspection & Weighing Service, Inc. Designation; Selection of...

    Science.gov (United States)

    2012-11-06

    ... Stockyards Administration, USDA. ACTION: Notice; correction. SUMMARY: The USDA, Grain Inspection, Packers and Stockyards Administration published a document in the Federal Register on October 31, 2012, concerning... Stockyards Administration. [FR Doc. 2012-27079 Filed 11-5-12; 8:45 am] BILLING CODE 3410-KD-P ...

  2. Special Engineering Services to Establish Inspection Criteria for Bearings to Improve Life Prediction.

    Science.gov (United States)

    1979-12-01

    ll i . -- II 53 I V. REFERENCES 1. Barton, J. R., "Early Fatigue Damage Detection in 4140 Steel Tubes", Proc. Fifth Annual Symposium on NDE of...34Advanced Non- destructive Testing Methods for Bearing Inspection", SAE Paper No. 720172, Automotive Engineering Congress, Detroit, Michigan, January

  3. Ageing Management Programme: An Experience of In-Service Inspection of the Kartini Heat Exchanger

    Energy Technology Data Exchange (ETDEWEB)

    Nitiswati, S., E-mail: nitis@batan.go.id [Centre for Reactor Technology and Nuclear Safety, National Nuclear Energy Agency (BATAN), Jakarta (Indonesia); Syarip,; Tjiptono, T.; Wantana, [Centre for Accelerator and Material Process Technology, National Nuclear Energy Agency (BATAN), Yogyakarta (Indonesia)

    2014-08-15

    This paper discusses an experience on ISI of the Kartini reactor heat exchanger, as part of the implementation of an ageing management programme. Kartini reactor is located in Yogyakarta, Indonesia. The heat exchanger was constructed for 250 kW capacity. The type of heat exchanger is shell with tube recirculation. Tube material is stainless steel 304, and the shell and baffle plate materials are carbon steel. The heat exchanger has 72 tubes, its outer and inner diameters respectively are 19 and 16 mm, and tube thickness is 1.5 mm. The aim of ISI was to obtain and evaluate the heat exchanger’s condition including the detection of any possible local tube thinning, pitting corrosion or gradual thinning, and determine whether any degradation or deterioration of the heat exchanger could have a significant impact to safety. The heat exchanger was inspected utilizing eddy current equipment in 2003 and 2006. Inspection results in 2003 determined that 12 heat exchanger tubes have a thinning degradation level ranging from 10% up to 60% of the outer diameter due to pitting corrosion. Deterioration of baffle plates has been linked to general corrosion attack. Inspection results in 2006 showed a consistent thinning degradation level with the previous inspection in 2003. So far heat exchanger performance is still satisfactory, as defined by the transfer of primary heat for a 2°C difference between inlet and outlet as required. (author)

  4. Pre-service inspection program of the Block 1 of the Juragua NPP

    International Nuclear Information System (INIS)

    Mirabal Monteagudo, Juan de Dios

    1996-01-01

    The present work intends to explain the importance of a inspection program from pre-development of the components the stage submitted to pressure based on the existing regulation in the country and the information delivered by the manufacturers and this is compared with the requirements of the similar regulation adopted in the other western countries

  5. 77 FR 62243 - Health Resources and Services Administration

    Science.gov (United States)

    2012-10-12

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration National... Services Administration (HRSA), Parklawn Building (and via audio conference call), 5600 Fishers Lane, Room... and Services Administration, Parklawn Building, Room 13-64, 5600 Fishers Lane, Rockville, Maryland...

  6. 75 FR 2480 - Wildlife Services; Availability of an Environmental Assessment and Finding of No Significant Impact

    Science.gov (United States)

    2010-01-15

    .... Kevin Shea Acting Administrator, Animal and Plant Health Inspection Service. [FR Doc. 2010-806 Filed 1... DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service [Docket No. APHIS-2009-0087...: Animal and Plant Health Inspection Service, USDA. ACTION: Notice. SUMMARY: We are advising the public...

  7. Rural health service managers' perspectives on preparing rural health services for climate change.

    Science.gov (United States)

    Purcell, Rachael; McGirr, Joe

    2018-02-01

    To determine health service managers' (HSMs) recommendations on strengthening the health service response to climate change. Self-administered survey in paper or electronic format. Rural south-west of New South Wales. Health service managers working in rural remote metropolitan areas 3-7. Proportion of respondents identifying preferred strategies for preparation of rural health services for climate change. There were 43 participants (53% response rate). Most respondents agreed that there is scepticism regarding climate change among health professionals (70%, n = 30) and community members (72%, n = 31). Over 90% thought that climate change would impact the health of rural populations in the future with regard to heat-related illnesses, mental health, skin cancer and water security. Health professionals and government were identified as having key leadership roles on climate change and health in rural communities. Over 90% of the respondents believed that staff and community in local health districts (LHDs) should be educated about the health impacts of climate change. Public health education facilitated by State or Federal Government was the preferred method of educating community members, and education facilitated by the LHD was the preferred method for educating health professionals. Health service managers hold important health leadership roles within rural communities and their health services. The study highlights the scepticism towards climate change among health professionals and community members in rural Australia. It identifies the important role of rural health services in education and advocacy on the health impacts of climate change and identifies recommended methods of public health education for community members and health professionals. © 2017 National Rural Health Alliance Inc.

  8. [Marketing mix in health service].

    Science.gov (United States)

    Ameri, Cinzia; Fiorini, Fulvio

    2015-01-01

    The marketing mix is the combination of the marketing variables that a firm employs with the purpose to achieve the expected volume of business within its market. In the sale of goods, four variables compose the marketing mix (4 Ps): Product, Price, Point of sale and Promotion. In the case of providing services, three further elements play a role: Personnel, Physical Evidence and Processes (7 Ps). The marketing mix must be addressed to the consumers as well as to the employees of the providing firm. Furthermore, it must be interpreted as employees ability to satisfy customers (interactive marketing).

  9. 78 FR 14806 - Health Resources and Services Administration

    Science.gov (United States)

    2013-03-07

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Statement of Organization, Functions and Delegations of Authority; Correction AGENCY: Health Resources and Services Administration (HRSA), HHS. ACTION: Notice; correction. SUMMARY: HRSA published a document in the Federal...

  10. Mothers' health services utilization and health care seeking ...

    African Journals Online (AJOL)

    Background: data from different studies showed health care behaviour and estimated per capita health care expenditure for the general population, but the specific data for infants at different levels of care are lacking. The objectives of this study were to describe mothers' health service utilization during pregnancy and ...

  11. [Quality assurance in occupational health services].

    Science.gov (United States)

    Michalak, J

    1996-01-01

    The general conditions influencing the quality assurance and audit in Polish occupational health services are presented. The factors promoting or hampering the implementation of quality assurance and audits are also discussed. The major influence on the transformation of Polish occupational health services in exorted by employers who are committed to cover the costs of the obligatory prophylactic examination of their employees. This is the factor which also contributes to the improvement of quality if services. The definitions of the most important terms are reviewed to highlight their accordance with the needs of occupational health services in Poland. The examples of audit are presented and the elements of selected methods of auditing are suggested to be adopted in Poland.

  12. Alaska Department of Health and Social Services

    Science.gov (United States)

    marijuana means for Alaska and you. Careline: 1-877-266-HELP (4357) Alaska's Tobacco Quitline Learn the Twitter Find us on Facebook Quicklinks Alaska Opioid Policy Task Force "Spice" Synthetic Marijuana Health Information Alaska State Plan for Senior Services, FY 2016-FY 2019 Get health insurance at

  13. Maternal health services in South Africa

    African Journals Online (AJOL)

    health services, specifically introducing free health care for pregnant women and ... new government to transform a society built upon inequity. The data on which this ... clinic we teenagers they treat us very bad, they hit us and insult us so it is ...

  14. Green Infrastructure, Ecosystem Services, and Human Health.

    Science.gov (United States)

    Coutts, Christopher; Hahn, Micah

    2015-08-18

    Contemporary ecological models of health prominently feature the natural environment as fundamental to the ecosystem services that support human life, health, and well-being. The natural environment encompasses and permeates all other spheres of influence on health. Reviews of the natural environment and health literature have tended, at times intentionally, to focus on a limited subset of ecosystem services as well as health benefits stemming from the presence, and access and exposure to, green infrastructure. The sweeping influence of green infrastructure on the myriad ecosystem services essential to health has therefore often been underrepresented. This survey of the literature aims to provide a more comprehensive picture-in the form of a primer-of the many simultaneously acting health co-benefits of green infrastructure. It is hoped that a more accurately exhaustive list of benefits will not only instigate further research into the health co-benefits of green infrastructure but also promote consilience in the many fields, including public health, that must be involved in the landscape conservation necessary to protect and improve health and well-being.

  15. Green Infrastructure, Ecosystem Services, and Human Health

    Science.gov (United States)

    Coutts, Christopher; Hahn, Micah

    2015-01-01

    Contemporary ecological models of health prominently feature the natural environment as fundamental to the ecosystem services that support human life, health, and well-being. The natural environment encompasses and permeates all other spheres of influence on health. Reviews of the natural environment and health literature have tended, at times intentionally, to focus on a limited subset of ecosystem services as well as health benefits stemming from the presence, and access and exposure to, green infrastructure. The sweeping influence of green infrastructure on the myriad ecosystem services essential to health has therefore often been underrepresented. This survey of the literature aims to provide a more comprehensive picture—in the form of a primer—of the many simultaneously acting health co-benefits of green infrastructure. It is hoped that a more accurately exhaustive list of benefits will not only instigate further research into the health co-benefits of green infrastructure but also promote consilience in the many fields, including public health, that must be involved in the landscape conservation necessary to protect and improve health and well-being. PMID:26295249

  16. [Leadership in the health services].

    Science.gov (United States)

    Neri, A

    1986-01-01

    The concept of leadership is not centered on strength of conviction or the ability to inspire support from others. Authority requires obedience, which is unlikely to bring about substantive changes. There are three classical types of leadership: bureaucratic (which depends on the size of one's share of power within an institution), prestige (which depends on one's technical expertise and standing in one's profession), and political (which depends on the extent of one's power in society at large). Prestige leadership pertains to an occupation and applies particularly to the health professions, especially the medical profession. Change is conditioned by factors internal to the health field (such as technological innovations and dissatisfaction with remunerations and social standing in some occupations) and by elements in the social context. These elements include historical situations favorable to change (crises) and forces for preservation of the status quo.

  17. Innovations in plant health services in Nicaragua

    DEFF Research Database (Denmark)

    Danielsen, Solveig; Centeno, Julio; López, Julio

    2013-01-01

    to the creation of a ‘National Plant Health System’ offering regular advice to farmers. The innovations were driven by a momentum for change, committed individuals, joint learning and flexibility in programme management. External facilitation encouraged experimentation and bolstered growth of new alliances....... The development of the national plant health system was constrained by existing work cultures that limit the scope of individual and institutional innovations.......Establishing a few community-based plant clinics in Nicaragua led to a series of innovations in plant health service delivery. A grassroots experiment became a nationwide initiative involving local service providers, universities, research institutions and diagnostic laboratories. This led...

  18. 42 CFR 441.15 - Home health services.

    Science.gov (United States)

    2010-10-01

    ... Provisions § 441.15 Home health services. With respect to the services defined in § 440.70 of this subchapter, a State plan must provide that— (a) Home health services include, as a minimum— (1) Nursing services... 42 Public Health 4 2010-10-01 2010-10-01 false Home health services. 441.15 Section 441.15 Public...

  19. Role of the Public Health Service

    Energy Technology Data Exchange (ETDEWEB)

    Moore, R T [Bureau of Radiological Health, RockviIle, MD (United States)

    1969-07-01

    The Public Health Service must assume the role of the overall Public Health Coordinator, seeking to afford the highest level of health protection both to the nearby population as well as to the more distant groups. Data will be given relative to the limited experience the PHS has had in the removal of populations from areas of suspected hazards. Problems inherent in the evacuation of civilians of all ages will be discussed. (author)

  20. Role of the Public Health Service

    International Nuclear Information System (INIS)

    Moore, R.T.

    1969-01-01

    The Public Health Service must assume the role of the overall Public Health Coordinator, seeking to afford the highest level of health protection both to the nearby population as well as to the more distant groups. Data will be given relative to the limited experience the PHS has had in the removal of populations from areas of suspected hazards. Problems inherent in the evacuation of civilians of all ages will be discussed. (author)

  1. Public Health Service Safety Program

    Energy Technology Data Exchange (ETDEWEB)

    McBride, J R [Southwestern Radiological Health Laboratory, Las Vegas, NV (United States)

    1969-07-01

    Off-Site Radiological Safety Programs conducted on past Plowshare experimental projects by the Southwestern Radiological Health Laboratory for the AEC will be presented. Emphasis will be placed on the evaluation of the potential radiation hazard to off-site residents, the development of an appropriate safety plan, pre- and post-shot surveillance activities, and the necessity for a comprehensive and continuing community relations program. In consideration of the possible wide use of nuclear explosives in industrial applications, a new approach to off-site radiological safety will be discussed. (author)

  2. Public Health Service Safety Program

    International Nuclear Information System (INIS)

    McBride, J.R.

    1969-01-01

    Off-Site Radiological Safety Programs conducted on past Plowshare experimental projects by the Southwestern Radiological Health Laboratory for the AEC will be presented. Emphasis will be placed on the evaluation of the potential radiation hazard to off-site residents, the development of an appropriate safety plan, pre- and post-shot surveillance activities, and the necessity for a comprehensive and continuing community relations program. In consideration of the possible wide use of nuclear explosives in industrial applications, a new approach to off-site radiological safety will be discussed. (author)

  3. In-service inspection of the vessels of nuclear submarine reactors

    International Nuclear Information System (INIS)

    Saglio, R.; Mercier L'Abbe, G.

    1977-02-01

    Description is given of a machine of automatic inspection of the reactor vessels of nuclear submarines, that was developed by the French Atomic Energy Commission (CEA). A focused ultrasound testing method is used. The equipment such described meets the safety requirements prescribed for the primary circuits of nuclear submarine boiler plants. The sensitivity and resolution power of the apparatus allow such high precision to be obtained as rupture mechanics gains a credibility that could not have been obtained with using conventional apparatus [fr

  4. Application of phased arrays in basic and in-service inspection

    International Nuclear Information System (INIS)

    Gebhardt, W.; Schwarz, H.P.; Bonitz, F.; Woll, H.

    1985-01-01

    In the scope of the reactor safety research program of the Federal Ministry of Research and Technology a flexible microcomputer controlled phased array system was developed. Meanwhile, several industrial prototypes for simple and complicated applications are built up. The applicability of phased array systems in NDE for basic and inservice inspections of reactor pressure vessels is investigated. Methods for defect detection, reconstruction and classification are described

  5. Automation of eddy current system for in-service inspection of turbine and generator bores

    International Nuclear Information System (INIS)

    Viertl, J.R.M.

    1988-01-01

    The most commonly applied inspection method for ferromagnetic turbine and generator rotor bores is the magnetic particle test technique. This method is subjective, depends on the test operator's skill and diligence in identifying test indications, and suffers from poor repeatability, especially for small indications. Automation would improve repeatability. However, magnetic particle tests are not easily automated, because the data are in the form of sketches, photographs, and written and oral descriptions of the indications. Eddy current inspection has obvious potential to replace magnetic particle methods in this application. Eddy current tests can be readily automated, as the data are in the form of voltages that can be recorded, digitized, and manipulated by a computer. The current project continues the investigation of the correlation between eddy current and magnetic particle inspection. Two systems have been combined to acquire eddy current data automatically. This combination of systems consists of the Nortec-25L Eddyscope (to provide the analog eddy current signals) and the General Electric DATAQ (TM) System (to perform the automatic data acquisition). The automation of the system is discussed

  6. 42 CFR 136a.15 - Health Service Delivery Areas.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Health Service Delivery Areas. 136a.15 Section 136a... Receive Care? § 136a.15 Health Service Delivery Areas. (a) The Indian Health Service will designate and... Federal Indian reservations and areas surrounding those reservations as Health Service Delivery Areas. (b...

  7. 42 CFR 440.20 - Outpatient hospital services and rural health clinic services.

    Science.gov (United States)

    2010-10-01

    ... Definitions § 440.20 Outpatient hospital services and rural health clinic services. (a) Outpatient hospital... services that are not generally furnished by most hospitals in the State. (b) Rural health clinic services... 42 Public Health 4 2010-10-01 2010-10-01 false Outpatient hospital services and rural health...

  8. Optimising import phytosanitary inspection

    NARCIS (Netherlands)

    Surkov, I.

    2007-01-01

    Keywords: quarantine pest, plant health policy, optimization, import phytosanitary inspection, ‘reduced checks’, optimal allocation of resources, multinomial logistic regression, the Netherlands World trade is a major vector of spread of quarantine plant pests. Border phytosanitary inspection

  9. Climate Services to Improve Public Health

    Science.gov (United States)

    Jancloes, Michel; Thomson, Madeleine; Costa, María Máñez; Hewitt, Chris; Corvalan, Carlos; Dinku, Tufa; Lowe, Rachel; Hayden, Mary

    2014-01-01

    A high level expert panel discussed how climate and health services could best collaborate to improve public health. This was on the agenda of the recent Third International Climate Services Conference, held in Montego Bay, Jamaica, 4–6 December 2013. Issues and challenges concerning a demand led approach to serve the health sector needs, were identified and analysed. Important recommendations emerged to ensure that innovative collaboration between climate and health services assist decision-making processes and the management of climate-sensitive health risk. Key recommendations included: a move from risk assessment towards risk management; the engagement of the public health community with both the climate sector and development sectors, whose decisions impact on health, particularly the most vulnerable; to increase operational research on the use of policy-relevant climate information to manage climate- sensitive health risks; and to develop in-country capacities to improve local knowledge (including collection of epidemiological, climate and socio-economic data), along with institutional interaction with policy makers. PMID:24776719

  10. Some reliability targets affecting the necessary provisions for in-service inspection and monitoring of LMFBR engineering components

    International Nuclear Information System (INIS)

    Bolt, P.R.

    1980-01-01

    The possible consequences of failure of primary and secondary sodium circuit components are discussed with particular reference to post incident fault diagnosis, remedial procedures and outage durations. The core support structures and steam generator units are identified as particularly important components in terms of economic consequence of their failure. Important safety considerations may also apply. Levels of reliability for core support and steam generator integrity, necessary to meet economic and certain safety criteria, are discussed and quantitative data is given. Possible failure and deterioration mechanisms which could result in unacceptable reductions in reliability are then identified for the core support and steam generator units. Following a consideration of the reliability targets and possible causes of loss of reliability, an appraisal is made of the necessary extent of in-service data to be obtained on component behaviour and condition. In-service inspection and monitoring methods that could be used to obtain this data are described. Consideration is given to UK and overseas inspection experience on LMFBR and other nuclear plant. (author)

  11. Some reliability targets affecting the necessary provisions for in-service inspection and monitoring of LMFBR engineering components

    Energy Technology Data Exchange (ETDEWEB)

    Bolt, P R [Fast Reactor Engineering, Plant Engineering Department, CEGB, Barnwood, Gloucester (United Kingdom)

    1980-11-01

    The possible consequences of failure of primary and secondary sodium circuit components are discussed with particular reference to post incident fault diagnosis, remedial procedures and outage durations. The core support structures and steam generator units are identified as particularly important components in terms of economic consequence of their failure. Important safety considerations may also apply. Levels of reliability for core support and steam generator integrity, necessary to meet economic and certain safety criteria, are discussed and quantitative data is given. Possible failure and deterioration mechanisms which could result in unacceptable reductions in reliability are then identified for the core support and steam generator units. Following a consideration of the reliability targets and possible causes of loss of reliability, an appraisal is made of the necessary extent of in-service data to be obtained on component behaviour and condition. In-service inspection and monitoring methods that could be used to obtain this data are described. Consideration is given to UK and overseas inspection experience on LMFBR and other nuclear plant. (author)

  12. 76 FR 65165 - Importation of Plants for Planting; Risk-Based Sampling and Inspection Approach and Propagative...

    Science.gov (United States)

    2011-10-20

    ..., this 14th day of October 2011. Kevin Shea, Acting Administrator, Animal and Plant Health Inspection... DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service [Docket No. APHIS-2011-0092] Importation of Plants for Planting; Risk-Based Sampling and Inspection Approach and Propagative Monitoring and...

  13. Students' perspectives to health care services in lithuania

    OpenAIRE

    Brancevič, Jolita

    2016-01-01

    Students' Perspectives to Health Care Services in Lithuania Introduction. The Rights of Patients and Compensation for the Damage to Their Health Act defines health care services as safe and effective means to take care of health, identify, diagnose and treat diseases and provide nursing services. The aims set out in a policy of health care services are fairly broad and, among others, include the improvement of both the quality and the availability of health care services. The issues of increa...

  14. Educational Psychology in Scotland: Making a Difference. An Aspect Report on the Findings of Inspections of Local Authority Educational Psychology Services 2006-10

    Science.gov (United States)

    Her Majesty's Inspectorate of Education, 2011

    2011-01-01

    This report provides, for the first time, an overview based on inspections of all 32 local authority educational psychology services. The picture it presents is broadly a very positive one although it also points to areas in which there is certainly scope for further improvement. The report shows that services are making a positive difference to…

  15. Experiences of community service environmental health practitioners

    Directory of Open Access Journals (Sweden)

    Anusha Karamchand

    2017-11-01

    Full Text Available Orientation: The community service initiative, a 1-year placement of health graduates, significantly improved human resource availability in the South African public health sector, even though the process was fraught with challenges. Although experiences in the curative health sector were assessed, the experiences of environmental health practitioners were yet to be studied. Research purpose: This study assessed the experiences of environmental health practitioners during their community service year. Motivation for the study: Anecdotal evidence suggested problems with the process. This study endeavoured to identify the challenges whilst taking cognisance of its effectiveness. Method: A total of n = 40 environmental health graduates from the Durban University of Technology who had concluded community service completed questionnaires in this crosssectional quantitative study. Descriptive statistics, means and standard deviations were used to analyse the data. Main findings: The timing of community service placements was critical as 58% of respondents had to repay study loans. The placement of married respondents (10% outside KwaZuluNatal, however, could have had impacts on family structures. Only 68% felt stimulated by their job functions, and there arose challenges with accommodation and overtime duties. Respondents felt that their tertiary education did equip them and that engagement with senior personnel helped in their professional development. Even though most of the review of the community service year appeared to be positive, a majority of respondents did not intend to continue working or recommending their workplaces. Future career pathing showed that 79% would prefer to be employed outside the public sector. Practical and managerial implications: The process needs to be reviewed to strengthen human resource management and enhance retention in the often overloaded and under-resourced South African public health sector. Contribution

  16. Application of non-destructive testing and in-service inspections to research reactors and preparation of ISI programme and manual for WWR-C research reactors

    International Nuclear Information System (INIS)

    Khattab, M.

    1996-01-01

    The present report gives a review on the results of application of non-destructive testing and in-service inspections to WWR-C reactors in different countries. The major problems related to reactor safety and the procedure of inspection techniques are investigated to collect the experience gained from this type of reactors. Exchangeable experience in solving common problems in similar reactors play an important role in the effectiveness of their rehabilitation programmes. 9 figs., 4 tabs

  17. Women as managers in the health services

    Directory of Open Access Journals (Sweden)

    Jocelyne Kane Berman

    1989-09-01

    Full Text Available Despite their numerical superiority women do not occupy positions o f power and authority in the health services generally. This is perceived as being due to a variety of factors which prevent women from realising their ful l potential as managers. In other parts of the world, as well as in South Africa, middle class white males have dominated health services, since medicine became a form al science, usurping the traditional role of women healers. Some research indicates that women are inclined to practice “feminine " management styles. It is suggested that the femine I masculine dichotomy is artificial and that qualities which ensure effective management should not be regarded as genderlinked. Leaders in the health services should strive for interdisciplinary, mixed-gender education and training at all levels. Identification and development of management potential in women health-care professionals, role-modelling and sponsor-mentor relationships should be encouraged to allow women to acquire the full range of management skills and to achieve positions of power and authority in the health services.

  18. Effects of nuclear war on health and health services

    International Nuclear Information System (INIS)

    1990-01-01

    This report reviews the findings since 1987 in the field of research related to the possible impact of nuclear war and nuclear explosions on health and health services. An annex contains the finding and conclusions of a 1989 United Nations study on the climatic and other effects of nuclear war. 1 tab

  19. School Mental Health Resources and Adolescent Mental Health Service Use

    Science.gov (United States)

    Green, Jennifer Greif; McLaughlin, Katie A.; Alegria, Margarita; Costello, E. Jane; Gruber, Michael J.; Hoagwood, Kimberly; Leaf, Philip J.; Olin, Serene; Sampson, Nancy A.; Kessler, Ronald C.

    2013-01-01

    Objective: Although schools are identified as critical for detecting youth mental disorders, little is known about whether the number of mental health providers and types of resources that they offer influence student mental health service use. Such information could inform the development and allocation of appropriate school-based resources to…

  20. Occupational health services in PR China

    International Nuclear Information System (INIS)

    Liang Youxin; Xiang Quanyong

    2004-01-01

    In China, the origin of occupational health started in the mid 1950s soon after the founding of the People's Republic of China. However, more complete concept and practice of occupational health was defined after the early 1980s, when China started her full-scale drive for economic reform and policy of openness. The integrity intends to cover occupational health, occupational medicine, industrial toxicology, industrial hygiene, occupational ergonomics, and occupational psychology as theoretical and practical components of occupational health. As a result, occupational health in China has undergone many changes and has improved over the past decades. These changes and improvements came about, most likely due to a new scheme, where a holistic approach of the recognition, regulation, and provision of occupational health services in a wider coverage is gradually formed and brought into effect. This presentation provides the current status of occupational health and safety problems, the latest legislative to occupational health and safety, and a general scenario of the organizational structure and function of occupational health services in China. It attempts to share with participants both our experience and lessons learned towards creating a more open and effective channel of ideas and information sharing

  1. [Health services access survey for Colombian households].

    Science.gov (United States)

    Arrivillaga, Marcela; Aristizabal, Juan Carlos; Pérez, Mauricio; Estrada, Victoria Eugenia

    The aim of this study was to design and validate a health services access survey for households in Colombia to provide a methodological tool that allows the country to accumulate evidence of real-life access conditions experienced by the Colombian population. A validation study with experts and a pilot study were performed. It was conducted in the municipality of Jamundi, located in the department of Valle del Cauca, Colombia. Probabilistic, multistage and stratified cluster sampling was carried out. The final sample was 215 households. The survey was composed of 63 questions divided into five modules: socio-demographic profile of the head of the household or adult informant, household socioeconomic profile, access to preventive services, access to curative and rehabilitative services and household out of pocket expenditure. In descriptive terms, the promotion of preventive services only reached 44%; the use of these services was always highest among children younger than one year old and up to the age of ten. The perceived need for emergency medical care and hospitalisation was between 82% and 85%, but 36% perceived the quality of care to be low or very low. Delays were experienced in medical visits with GPs and specialists. The designed survey is valid, relevant and representative of access to health services in Colombia. Empirically, the pilot showed institutional weaknesses in a municipality of the country, indicating that health coverage does not in practice mean real and effective access to health services. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  2. Public health capacity in the provision of health care services.

    Science.gov (United States)

    Valdmanis, Vivian; DeNicola, Arianna; Bernet, Patrick

    2015-12-01

    In this paper, we assess the capacity of Florida's public health departments. We achieve this by using bootstrapped data envelopment analysis (DEA) applied to Johansen's definition of capacity utilization. Our purpose in this paper is to measure if there is, theoretically, enough excess capacity available to handle a possible surge in the demand for primary care services especially after the implementation of the Affordable Care Act that includes provisions for expanded public health services. We measure subunit service availability using a comprehensive data source available for all 67 county health departments in the provision of diagnostic care and primary health care. In this research we aim to address two related research questions. First, we structure our analysis so as to fix budgets. This is based on the assumption that State spending on social and health services could be limited, but patient needs are not. Our second research question is that, given the dearth of primary care providers in Florida if budgets are allowed to vary is there enough medical labor to provide care to clients. Using a non-parametric approach, we also apply bootstrapping to the concept of plant capacity which adds to the productivity research. To preview our findings, we report that there exists excess plant capacity for patient treatment and care, but question whether resources may be better suited for more traditional types of public health services.

  3. Tridimensional ultrasonic images analysis for the in service inspection of fast breeder reactors

    International Nuclear Information System (INIS)

    Dancre, M.

    1999-11-01

    Tridimensional image analysis provides a set of methods for the intelligent extraction of information in order to visualize, recognize or inspect objects in volumetric images. In this field of research, we are interested in algorithmic and methodological aspects to extract surface visual information embedded in volume ultrasonic images. The aim is to help a non-acoustician operator, possibly the system itself, to inspect surfaces of vessel and internals in Fast Breeder Reactors (FBR). Those surfaces are immersed in liquid metal, what justifies the ultrasonic technology choice. We expose firstly a state of the art on the visualization of volume ultrasonic images, the methods of noise analysis, the geometrical modelling for surface analysis and finally curves and surfaces matching. These four points are then inserted in a global analysis strategy that relies on an acoustical analysis (echoes recognition), an object analysis (object recognition and reconstruction) and a surface analysis (surface defects detection). Few literature can be found on ultrasonic echoes recognition through image analysis. We suggest an original method that can be generalized to all images with structured and non-structured noise. From a technical point of view, this methodology applied to echoes recognition turns out to be a cooperative approach between morphological mathematics and snakes (active contours). An entropy maximization technique is required for volumetric data binarization. (author)

  4. 41 CFR 101-5.307 - Public Health Service.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Public Health Service... AND COMPLEXES 5.3-Federal Employee Health Services § 101-5.307 Public Health Service. (a) The only authorized contact point for assistance of and consultation with the Public Health Service is the Federal...

  5. The clinical course of asymptomatic esophageal candidiasis incidentally diagnosed in general health inspection.

    Science.gov (United States)

    Lee, Sang Pyo; Sung, In-Kyung; Kim, Jeong Hwan; Lee, Sun-Young; Park, Hyung Seok; Shim, Chan Sup

    2015-01-01

    Esophageal candidiasis mostly occurs in the immunocompromised host. However, it may also affect healthy people and is frequently asymptomatic. The clinical significance of asymptomatic esophageal candidiasis (AEC) is still unclear. The aims of the study were to investigate the prevalence of AEC during health inspection and to identify its predisposing factors and clinical significance. A total of 49,497 subjects who underwent a health inspection that included upper endoscopy were enrolled. We retrospectively reviewed the subject's self-reporting questionnaires, medical records and endoscopic findings. We considered "long-term" follow-up to be >6 months with at least one more follow-up endoscopy. One hundred and seventy (0.4%) subjects were endoscopically diagnosed as esophageal candidiasis and 141 subjects were AEC. Multivariate analysis revealed that old age (≥60 years) was an independent risk factor for AEC (OR, 1.862, p = 0.005). The number of subjects with long-term follow-up was 79 (195.3 person-years). Among these, AEC of 64 subjects (81.0%) had disappeared on the follow-up endoscopy and was not recurrent. The other 15 subjects had AEC diagnosed more than once on the follow-up endoscopy, and 5 of them were spontaneously healed during the follow-up period. The remaining 10 subjects whose candidiasis was sustained up to the last endoscopy did not complain of symptoms during the follow-up period, and their endoscopic findings did not worsen. AEC is rare and old age is the only risk factor. AEC does not require medical care because it is a self-limited disease.

  6. Based Sexual Health Services in Malawi

    African Journals Online (AJOL)

    Erah

    To more effectively address individuals' and couples' sexual and reproductive health needs, innovative service delivery ... We collected qualitative data from six focus group discussions and 10 husband-wife in- .... Counseling partners together in their home may .... young men (13.2 percent versus 3.9 percent in ages.

  7. Health Service Areas (HSAs) - Small Area Estimates

    Science.gov (United States)

    Health Service Areas (HSAs) are a compromise between the 3000 counties and the 50 states. An HSA may be thought of as an area that is relatively self-contained with respect to hospital care and may cross over state boundries.

  8. Who Killed the English National Health Service?

    Directory of Open Access Journals (Sweden)

    Martin Powell

    2015-05-01

    Full Text Available The death of the English National Health Service (NHS has been pronounced many times over the years, but the time and cause of death and the murder weapon remains to be fully established. This article reviews some of these claims, and asks for clearer criteria and evidence to be presented.

  9. Marketing service guarantees for health care.

    Science.gov (United States)

    Levy, J S

    1999-01-01

    The author introduces the concept of service guarantees for application in health care and differentiates between explicit, implicit, and conditional vs. unconditional types of guarantees. An example of an unconditional guarantee of satisfaction is provided by the hospitality industry. Firms conveying an implicit guarantee are those with outstanding reputations for products such as luxury automobiles, or ultimate customer service, like Nordstrom. Federal Express and Domino's Pizza offer explicit guarantees of on-time delivery. Taking this concept into efforts to improve health care delivery involves a number of caveats. Customers invited to use exceptional service cards may use these to record either satisfaction or dissatisfaction. The cards need to provide enough specific information about issues so that "immediate action could be taken to improve processes." Front-line employees should be empowered to respond to complaints in a meaningful way to resolve the problem before the client leaves the premises.

  10. INTERNAL CONTROL IN PUBLIC HEALTH SERVICES INSTITUTIONS

    Directory of Open Access Journals (Sweden)

    Ludmila FRUMUSACHI

    2017-06-01

    Full Text Available Internal control has a special role in the efficient organization of the entity’s management. The components of this control in the institutions of public health service are determined by the specific character of these institutions and National Standards of Internal Control in the Public Sector. The system of internal control in the institutions of public health service has the capacity to canalize the effort of the whole institution for the achievement of proposed objectives, to signalize permanently the dysfunctionalities about the quality of medical services and the deviations and to operate timely corrective measures for eliminating the noticed problems. In this regard the managers are obliged to analyse and to resize the system of internal control when in the organizational structure appear substantial changes.

  11. Robots and service innovation in health care.

    Science.gov (United States)

    Oborn, Eivor; Barrett, Michael; Darzi, Ara

    2011-01-01

    Robots have long captured our imagination and are being used increasingly in health care. In this paper we summarize, organize and criticize the health care robotics literature and highlight how the social and technical elements of robots iteratively influence and redefine each other. We suggest the need for increased emphasis on sociological dimensions of using robots, recognizing how social and work relations are restructured during changes in practice. Further, we propose the usefulness of a 'service logic' in providing insight as to how robots can influence health care innovation. The Royal Society of Medicine Press Ltd 2011.

  12. EQUITABLE ACCESS TO HEALTH SERVICE IN BANYUWANGI

    Directory of Open Access Journals (Sweden)

    Lusi Herawati Sunyoto Usman Mark Zuidgeest

    2012-06-01

    as indicators. Flowmap tool is used to analyze catchment area of each health facility using different transport modes choice:becak and public transport for poor group and motorcycle and car for non-poor group with different travel time within 30, 60 and more than 60 minutes. It is concluded that there was an accessibility difference between poor and non-poor group. The accessibility to the health facilities of poor group was lower than non-poor group. This condition occurred because the government policy of equitable access to health service facility did not pay attention to accessibility of poor group.

  13. 78 FR 12422 - Health Services Research and Development Service Scientific Merit Review Board, Notice of Meeting

    Science.gov (United States)

    2013-02-22

    ... DEPARTMENT OF VETERANS AFFAIRS Health Services Research and Development Service Scientific Merit... nursing research. Applications are reviewed for scientific and technical merit, mission relevance, and the... Program Manager, Scientific Merit Review Board, Department of Veterans Affairs, Health Services Research...

  14. PAT portable appliance testing : in-service inspection and testing of electrical equipment

    CERN Document Server

    Scaddan, Brian

    2015-01-01

    The Electricity at Work Regulations 1989 requires any electrical system to be constructed, maintained and used in such a manner as to prevent danger. This means that inspection and testing of systems, including portable appliances, is needed in order to determine if maintenance is required. This book explains in clear language what needs to be done and includes expert advice on legislation as well as actual testing. The book contains an appendix providing the electrical fundamentals needed by non-specialists and also has sample questions (with answers) for the C&G 2377 exam. It is also an ideal revision guide for the non-specialist, such as maintenance staff and caretakers who carry out these tasks part-time, alongside their many other duties.

  15. 9 CFR 91.15 - Inspection of animals for export.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Inspection of animals for export. 91.15 Section 91.15 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS...

  16. RESSOURCES ALLOCATION POSSIBILITIES WITHIN HEALTH SERVICES

    Directory of Open Access Journals (Sweden)

    Manea Liliana

    2011-12-01

    Full Text Available The state policy in the health care area must take into account the complexity and specificity of the domain. Health means not only “to treat”, but also “to prevent” and “to recover and rehabilitate the individual physically”. Regardless of the adopted health insurance system, the health system is facing a big problem and this is the insufficient funds necessary to function properly. The underfunding may have various causes, from a wrong health policy, based on “treating” instead of “preventing”, by the misuse of funds. This papers intended to formulate assumptions that underpin the research I am conducting within the Doctoral Research Program held at the Valahia University of Targoviste, which aims at using the management control in increasing the health services performance. The application of the accounting and management control methods in determining health costs can be a beginning to streamline the system. This is also a result of the fact that health care is a public service with specific characteristics: it can not be subject only to market requirements but at the same time he must undergo an administrative savings, representing a typical case of market failure. The increased cost of treatment, as well as the decline in their quality can be determined by the discrepancy between the funding and payment mechanisms. Different payment systems currently available do nothing but perpetuate the shortcomings in the system. Switching to the introduction of cost and budgets by cost centers or object (if solved can be a step forward for a better management of resources. In this context, we consider as a necessity to be imposed the cost analysis on responsibility centers, the definition of the cost object and cost center identification and determination of direct costs and those indirect services to choose the basis for the allocation of cost centers and the determination of each actual cost per diagnosis.

  17. Factors affecting utilization of University health services in a tertiary ...

    African Journals Online (AJOL)

    2013-01-16

    Jan 16, 2013 ... Objective: To determine students' perception of health care services provided in a tertiary institution and ... evaluation of health services utilization among students in the .... African culture and health. ... Asian Am Pac Isl J.

  18. Service availability and readiness for diabetes care at health ...

    African Journals Online (AJOL)

    EPHA USER33

    2Addis Ababa University, College of Health Science, School of Medicine, Department of Internal Medicine, ... Results: Among all health facilities, 59% of health facilities offer services for .... provide good-quality client services for diabetes,.

  19. A randomised controlled study to evaluate the effectiveness of targeted occupational health and safety consultation or inspection in Ontario manufacturing workplaces.

    Science.gov (United States)

    Hogg-Johnson, Sheilah; Robson, Lynda; Cole, Donald C; Amick, Benjamin C; Tompa, Emile; Smith, Peter M; van Eerd, Dwayne; Mustard, Cameron

    2012-12-01

    From 2004 to 2008, the prevention system in Ontario, Canada ran the High Risk Firm Initiative, an injury-experience based targeted consultation or inspection programme. Our objective was to establish whether prevention system targeting of firms was effective in improving injury outcomes. Randomised controlled parallel groups. Population included all manufacturing firms registered with the Ontario Workplace Safety & Insurance Board in 2005. Firms ranked between the 2nd and 10th percentile on a composite measure of occupational health and safety performance were randomised to three study arms in 2006: targeted for Health & Safety Association (HSA) consultation, targeted for Ministry of Labour (MOL) inspection, or services as usual. Data included firm characteristics (sector, size, years in business, region, branches), work injury claims 2002-2008 and measures of consulting and inspecting activity. Negative binomial generalised estimating equations modelled claim and disability day rates by study arm and year, controlling for firm characteristics. Among 2153 firms, firm characteristics and 2002-2005 rates of work injury claims and disability days were similar across arms. Firm outcomes were significantly different from year to year, but study arm by year interactions were insignificant indicating similar trends for all three study arms. 83% of HSA targeted firms were contacted and 63% engaged while 75% of MOL targeted firms were inspected with orders written in 56%. Consultation and enforcement programmes as implemented were not sufficient to reduce work injury outcomes over 21 month follow-up. Lack of benefit could be due to non-specific firm selection methods, limited firm participation in interventions, low intervention intensity or insensitivity of available outcomes.

  20. Comparison between different methods for inspection of wooden poles in service in electricity distribution networks; Comparacao entre diferentes metodos de inspecao de postes de madeira em servico em redes de distribuicao de energia

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, M.A.O.; Pires, M.; Dedavid, B.A.; Vidor, F.L.R.; Oliveira, W.S.; Abruzzi, R.C. [Pontificia Univ. Catolica do Rio Grande do Sul (PUC-RS), Porto Alegre, RS (Brazil). Programa de Pos-Graduacao em Engenharia e Tecnologia de Materiais (PGETEMA)], Email: mpires@pucrs.br

    2010-07-01

    The pole is the main support structure of the electric network and should be inspected regularly to ensure system security. The aim of this study is to compare traditional and instrumental inspection methods of the wooden poles in service in AES Sul power distribution network (Montenegro, RS). The inspections were conducted in about 180 poles in two measurement campaigns (2001 and 2010). The procedure was based on the traditional inspection (visual inspection, percussion and effort lateral) and instrumental method based on Polux equipment that measures the penetration resistance and moisture content of wood. The results were compared in search of assertiveness of the methods used to subsidize the standardization of inspection procedures. (author)

  1. POLLUTION PREVENTION OPPORTUNITY ASSESSMENT - U.S. POSTAL INSPECTION SERVICE FORENSIC & TECHNICAL SERVICES DIVISION - NATIONAL FORENSIC LABORATORY, DULLES, VIRGINIA

    Science.gov (United States)

    The United States Postal Service (USPS) in cooperation with EPA's National Risk Management Research Laboratory (NRMRL) is engaged in an effort to integrate waste prevention and recycling activities into the waste management programs at Postal facilities. This report describes the...

  2. Inspection Correlation Study of Ultrasonic-Based In Situ Structural Health Monitoring Monthly Report for December 2014-January 2015

    Science.gov (United States)

    2015-05-01

    fatigue an induced ultrasonic elastic vibration (via piezoelectric transducers [ PZTs ]) propagates through the dogbone specimen. A receiver PZT picks up...inspection of fatigue crack growth in aluminum 7075-T6 dogbone specimens. Acellent Technologies, Inc., is supporting this project through providing...January 2015. 15. SUBJECT TERMS structural health monitoring, probabilistics, fatigue damage, guided waves, Lamb waves 16. SECURITY CLASSIFICATION OF

  3. Health services at the Kennedy Space Center

    Science.gov (United States)

    Ferguson, E. B.; Humbert, P.; Long, I. D.; Tipton, D. A.

    1992-01-01

    Comprehensive occupational health services are provided to approximately 17,000 workers at the Kennedy Space Center and an additional 6000 on Cape Canaveral Air Force Station. These areas cover about 120,000 acres encompassing part of the Merritt Island Wild Life Refuge and wetlands which are the habitat of numerous endangered and protected species of wildlife. The services provided at the Kennedy Space Center optimally assure a safe and healthy working environment for the employees engaged in the preparation and launching of this country's Space Shuttle and other important space exploration programs.

  4. An experience with in-service fabrication and inspection of austenitic stainless steel piping in high temperature sodium system

    Energy Technology Data Exchange (ETDEWEB)

    Ravi, S., E-mail: sravi@igcar.gov.in; Laha, K.; Sakthy, S.; Mathew, M.D.; Bhaduri, A.K.

    2015-04-01

    Highlights: • Procedure for changing 304L SS pipe to 316L SS in sodium loop has been established. • Hot leg made of 304L SS was isolated from existing cold leg made of 316LN SS. • Innovative welding was used in joining the new 316L SS pipe with existing 316LN SS. • The old components of 304L SS piping have been integrated with the new piping. - Abstract: A creep testing facility along with dynamic sodium loop was installed at Indira Gandhi Centre for Atomic Research, Kalpakkam, India to assess the creep behavior of fast reactor structural materials in flowing sodium. Type 304L austenitic stainless steel was used in the low cross section piping of hot-leg whereas 316LN austenitic stainless steel in the high cross section cold-leg of the sodium loop. The intended service life of the sodium loop was 10 years. The loop has performed successfully in the stipulated time period. To enhance its life time, it has been decided to replace the 304L piping with 316L piping in the hot-leg. There were more than 300 welding joints involved in the integration of cold-leg with the new 316L hot-leg. Continuous argon gas flow was maintained in the loop during welding to avoid contamination of sodium residue with air. Several innovative welding procedures have been adopted for joining the new hot-leg with the existing cold-leg in the presence of sodium residue adopting TIG welding technique. The joints were inspected for 100% X-ray radiography and qualified by performing tensile tests. The components used in the discarded hot-leg were retrieved, cleaned and integrated in the renovated loop. A method of cleaning component of sodium residue has been established. This paper highlights the in-service fabrication and inspection of the renovation.

  5. [Health services' utilization patterns in Catalonia, Spain].

    Science.gov (United States)

    Medina, Carmen; Salvador, Xavier; Faixedas, M Teresa; Gallo, Pedro

    2011-12-01

    The purpose of this article is disclose services utilization patterns among the Catalan population with particular emphasis on primary care, specialised care, hospital care and emergency care. A number of logistic regression models were used to explain the utilization of the various types of services. Variables in the analysis included self-perceived need, lifestyles, and sociodemographic variables. Separate analyses were performed for male, female, adults, and children as well as for the general population. Women use all types of services more often than men. Children and people over 64 are more frequent users of primary care. Primary care is also associated to lower socioeconomic conditions. Young adults and the migrant population in general are found to be under users of services, except of emergency care services. The use of specialised care is associated to the better-off, to those with university level education attainment, individual private insurance, and those living in the city of Barcelona. Hospital care is largely associated to need variables. The use of health services is explained by self-perceived need as well as by demographic, socioeconomic and geographical factors. Copyright © 2011 Elsevier España S.L. All rights reserved.

  6. Evaluation of sampling schemes for in-service inspection of steam generator tubing

    International Nuclear Information System (INIS)

    Hanlen, R.C.

    1990-03-01

    This report is a follow-on of work initially sponsored by the US Nuclear Regulatory Commission (Bowen et al. 1989). The work presented here is funded by EPRI and is jointly sponsored by the Electric Power Research Institute (EPRI) and the US Nuclear Regulatory Commission (NRC). The goal of this research was to evaluate fourteen sampling schemes or plans. The main criterion used for evaluating plan performance was the effectiveness for sampling, detecting and plugging defective tubes. The performance criterion was evaluated across several choices of distributions of degraded/defective tubes, probability of detection (POD) curves and eddy-current sizing models. Conclusions from this study are dependent upon the tube defect distributions, sample size, and expansion rules considered. As degraded/defective tubes form ''clusters'' (i.e., maps 6A, 8A and 13A), the smaller sample sizes provide a capability of detecting and sizing defective tubes that approaches 100% inspection. When there is little or no clustering (i.e., maps 1A, 20 and 21), sample efficiency is approximately equal to the initial sample size taken. Thee is an indication (though not statistically significant) that the systematic sampling plans are better than the random sampling plans for equivalent initial sample size. There was no indication of an effect due to modifying the threshold value for the second stage expansion. The lack of an indication is likely due to the specific tube flaw sizes considered for the six tube maps. 1 ref., 11 figs., 19 tabs

  7. Child Health Care Services in Austria.

    Science.gov (United States)

    Kerbl, Reinhold; Ziniel, Georg; Winkler, Petra; Habl, Claudia; Püspök, Rudolf; Waldhauser, Franz

    2016-10-01

    We describe child health care in Austria, a small country in Central Europe with a population of about 9 million inhabitants of whom approximately 1.7 million are children and adolescents under the age of 20 years. For children and adolescents, few health care indicators are available. Pediatric and adolescent health provision, such as overall health provision, follows a complex system with responsibilities shared by the Ministry of Health, 19 social insurance funds, provinces, and other key players. Several institutions are affiliated with or cooperate with the Ministry of Health to assure quality control. The Austrian public health care system is financed through a combination of income-based social insurance payments and taxes. Pediatric primary health care in Austria involves the services of general pediatricians and general practitioners. Secondary care is mostly provided by the 43 children's hospitals; tertiary care is (particularly) provided in 4 state university hospitals and 1 private university hospital. The training program of residents takes 6 years and is completed by a final examination. Every year, this training program is completed by about 60 residents. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. Forensic mental health services: Current service provision and planning for a prison mental health service in the Eastern Cape

    Directory of Open Access Journals (Sweden)

    Kiran Sukeri

    2016-05-01

    Full Text Available Objectives: No research data exists on forensic psychiatric service provision in the Eastern Cape, Republic of South Africa. The objective of this research was to assess current forensic psychiatric service provision and utilisation rates at Fort England Hospital. This is important in improving and strengthening the service. A related objective was to develop a model for a provincial prison mental health service. Methodology: This study is a situational analysis of an existing forensic psychiatric service in the Eastern Cape. The design of the study was cross sectional. An audit questionnaire was utilised to collate quantitative data, which was submitted to Fort England Hospital, Grahamstown. A proposed prison mental health service was developed utilising prevalence rates of mental illness among prisoners to calculate bed and staff requirements for an ambulatory and in-patient service. Results: During the study period a total of 403 remand detainees were admitted to the forensic psychiatry division of Fort England Hospital. The average length of stay was 494 days and the bed utilisation rate was determined at 203.54%. We estimate that to provide a provincial prison mental health service to treat psychotic illnesses and major depression the province requires a 52 bedded facility and a total staff complement of approximately 31. Conclusions: Forensic psychiatric services include the assessment, management and treatment of mentally disordered persons in conflict with the law and prisoners requiring psychiatric assessments. The Eastern Cape Province does not have plans or policies to assess and manage mentally ill offenders, resulting in an increased load on available services. We recommend that an inter-departmental task team, which includes Health, Justice and Constitutional Development and Correctional Services, should be established in the province, to develop a strategy to assist in the development of an effective and efficient forensic

  9. Sustainable quality systems for every Health Service

    International Nuclear Information System (INIS)

    Touzet, Rodolfo; Pittaluga, Roberto R.

    2008-01-01

    The implementation of a Quality system is an indispensable requirement to assure the protection and the radiological safety, especially in those facilities where the potential risks are important. One of the 'general conclusions' of the Conference of Malaga (to achieve the RPP) is also the implementation of quality systems. Lamentably the great majority of the Services of Health in the world, more than 95 %, has not nowadays any formal quality system but only any elements what can be named a 'natural quality system' that includes protocols of work, records of several processes, certified of training of the personnel and diverse practices that are realized in systematic form but that not always are documented. Most health services do not have the necessary means available to adhere quickly to international standards. At the same time the health services do not have either qualified or trained personnel to lead a certification or accreditation project and most of them do not have the resources available to hire external consultants, especially the public hospitals. The scenario described represents a challenge for the Regulatory Authorities who must determine 'how to ensure that installations comply with an acceptable standard of quality without it placing an impossible strain on their budget?' Due to these circumstances a 'Basic Guide' has developed for the implementation of a quality system in every Health Service that takes the elements as a foundation of the standard ISO - 9000:2000 and the standard for systems management GSR-3 of the IAEA. The criteria and the methodologies are showed in the presentation. (author)

  10. 43 CFR 17.250 - Health, welfare, and social services.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Health, welfare, and social services. 17... § 17.250 Health, welfare, and social services. This subpart applies to health, welfare, and other...) General. In providing health, welfare, or other social services or benefits, a recipient may not, on the...

  11. An evaluation of school health services in Sagamu, Nigeria

    African Journals Online (AJOL)

    2013-07-01

    Jul 1, 2013 ... scores (63.6%), while 96.2% of the private primary schools had poor health service evaluation scores. Conclusions: SHS are ... Key words: School Health Services, School Health Services Evaluation scale, Health knowledge, Nigeria ..... Since food and nutrition is an aspect of home economics, teaching.

  12. 42 CFR 440.70 - Home health services.

    Science.gov (United States)

    2010-10-01

    ... an acute illness to avoid the recipient's transfer to a nursing facility. (d) “Home health agency... 42 Public Health 4 2010-10-01 2010-10-01 false Home health services. 440.70 Section 440.70 Public...) MEDICAL ASSISTANCE PROGRAMS SERVICES: GENERAL PROVISIONS Definitions § 440.70 Home health services. (a...

  13. Information Technology in Complex Health Services

    Science.gov (United States)

    Southon, Frank Charles Gray; Sauer, Chris; Dampney, Christopher Noel Grant (Kit)

    1997-01-01

    Abstract Objective: To identify impediments to the successful transfer and implementation of packaged information systems through large, divisionalized health services. Design: A case analysis of the failure of an implementation of a critical application in the Public Health System of the State of New South Wales, Australia, was carried out. This application had been proven in the United States environment. Measurements: Interviews involving over 60 staff at all levels of the service were undertaken by a team of three. The interviews were recorded and analyzed for key themes, and the results were shared and compared to enable a continuing critical assessment. Results: Two components of the transfer of the system were considered: the transfer from a different environment, and the diffusion throughout a large, divisionalized organization. The analyses were based on the Scott-Morton organizational fit framework. In relation to the first, it was found that there was a lack of fit in the business environments and strategies, organizational structures and strategy-structure pairing as well as the management process-roles pairing. The diffusion process experienced problems because of the lack of fit in the strategy-structure, strategy-structure-management processes, and strategy-structure-role relationships. Conclusion: The large-scale developments of integrated health services present great challenges to the efficient and reliable implementation of information technology, especially in large, divisionalized organizations. There is a need to take a more sophisticated approach to understanding the complexities of organizational factors than has traditionally been the case. PMID:9067877

  14. 7 CFR 868.90 - Fees for certain Federal inspection services.

    Science.gov (United States)

    2010-01-01

    ... or sample) 13.75 (iii) Factor analysis (per factor) 5.65 (2) Additional Tests—Unit Rates (Hops): (i... Commodities): (i) Factor analysis (per factor) 5.65 (4) Stowage Examination (service-on-request) 4 (i) Ship... (24) Protein 16.00 (25) Sanitation (light filth) 47.00 (26) Sieve test 11.00 (27) Smoke Point 43.00...

  15. [Universal coverage of health services in Mexico].

    Science.gov (United States)

    2013-01-01

    The reforms made in recent years to the Mexican Health System have reduced inequities in the health care of the population, but have been insufficient to solve all the problems of the MHS. In order to make the right to health protection established in the Constitution a reality for every citizen, Mexico must warrant effective universal access to health services. This paper outlines a long-term reform for the consolidation of a health system that is akin to international standards and which may establish the structural conditions to reduce coverage inequity. This reform is based on a "structured pluralism" intended to avoid both a monopoly exercised within the public sector and fragmentation in the private sector, and to prevent falling into the extremes of authoritarian procedures or an absence of regulation. This involves the replacement of the present vertical integration and segregation of social groups by a horizontal organization with separation of duties. This also entails legal and fiscal reforms, the reinforcement of the MHS, the reorganization of health institutions, and the formulation of regulatory, technical and financial instruments to operationalize the proposed scheme with the objective of rendering the human right to health fully effective for the Mexican people.

  16. In-service inspection of nuclear reactor vessels and steam generators. Results and evolution of the technics

    International Nuclear Information System (INIS)

    Rapin, Michel; Saglio, Robert.

    1978-01-01

    Methods and original technics have been developed by the CEA for inspection of the primary coolant circuit of PWR. Multifrequency Eddy currents for inspection of steam generators tubes gudgeons and bolts; focussed ultrasonics to test all the welds of the reactor vessel and its cover of mixed welds of tanks and steam generators, pressurizer welds and gudgeons from the inside; gamma radiography of vessel mixed welds, televisual examination of the stainless steel lining of the reactor vessel and its cover. Use of these technics is made with specific automatic machines designed either for inspection of steam generator tubes or for complete inspection of the vessel. Several reactors were inspected with these devices [fr

  17. Development of Quality Management System Under ISO 9001:2015 and Joint Inspection Group (JIG for Aviation Fuelling Service

    Directory of Open Access Journals (Sweden)

    Ruamchat Kanon

    2017-09-01

    Full Text Available The Joint Inspection Group (JIG standard for aviation fuel quality management assists in the operational process and maintenance of aviation fuel from its point of origin and through distribution systems to airports. Currently, problems arise as the JIG standard and quality management in aviation fuel are isolated and have independent procedures. Merging the JIG standards with ISO 9001:2015 can override original JIG’s philosophy by connecting all quality assessment, and management parties involved, throughout the supply chain. This integration can harmonize auditing tasks, focusing on risk/opportunity, and continue quality improvement focus. This paper proposes a development of quality management system (QMS under ISO 9001:2015 for aviation fuelling service in a systematic way. The content and critical success factors of ISO 9001:2015 and JIG standards were studied. The beneficial synergies, similarities, and logical linkages between both standards are identified. This QMS was developed in the largest petroleum company in Thailand and 60 selected experts were surveyed, with a response rate of 88.3%, for their agreement on integrated criteria. Two external quality auditors, who have ISO 9001 and JIG expertise, were interviewed to modify our initial proposed QMS. The final QMS was implemented in the into-plane fuelling services as the first phase of this implementation. Results of framework implementation are discussed in a case study. There are mutual benefits resulting from the integration of JIG and ISO 9001:2015 standards. This QMS provides a unified process for quality management practices, and enhances the effectiveness of risk evaluation as well as the opportunity for continued quality improvement. It facilitates the identification of ISO 9001:2015 requirements and establishes relationships between the roles of JIG standard and the clauses of ISO 9001:2015. The first experience from five airports as the pilot study of proposed QMS

  18. Guided wave technology for in-service inspection and online monitoring for long term operation of nuclear power plants

    International Nuclear Information System (INIS)

    Bertoncini, Francesco; Raugi, Marco; Cappelli, Mauro; Cordella, Francesco; Mazzini, Davide

    2015-01-01

    In-Service Inspection (ISI) and monitoring of all equipment (Systems, Structures and Components, SSCs) of a Nuclear Power Plant (NPP), are actions aimed at preventing failures both for economical and safety purposes. SSCs ageing due to stresses such as corrosion, load variations, flow conditions, temperature and neutron irradiation can be a potential limit for NPP life extension or operation beyond their license term (Long Term Operation. LTO). ISI has a main role on the actual possibility of LTO assuring the required safety. Guided Waves are structure-borne ultrasonic waves that propagate along the structure confined and guided by its geometric boundaries. Guided Wave Testing can find defect locations through long-range screening using low-frequency waves (from 5 to 250 kHz). The technology is regularly used for pipe testing in the oil and gas industry. In the nuclear industry, regulators are working to standardize monitoring and inspection procedures. To use the technology inside an active plant, operators must solve issues like high temperatures (up to more than 300degC inside a light-water reactor's primary piping), high wall thickness of components in the primary circuit and characteristic defect typologies. Magnetostrictive sensors are expected to overcome such issues due to their physical properties, namely robust constitution and simplicity. Recent experimental results have demonstrated magnetostrictive transducers can withstand temperatures close to 300degC. In this paper, new experimental tests conducted using such a methodology will be described and open issues related to high temperature guided wave applications (e.g. wave velocity or amplitude fluctuations during propagation in variable temperature components) will be discussed. (author)

  19. Health Deficiencies

    Data.gov (United States)

    U.S. Department of Health & Human Services — A list of all health deficiencies currently listed on Nursing Home Compare, including the nursing home that received the deficiency, the associated inspection date,...

  20. Report on the Regulatory Experience of Risk-Informed In-service Inspection of Nuclear Power Plant Components and Common Views (consensus document)

    International Nuclear Information System (INIS)

    2004-08-01

    The present report represents the work product of the activities conducted by the Task Force. The TF performed a review and inventory of the existing approaches to risk-informed inservice inspection and testing, and completed its work in 1999 with a Current Practices Document 2, titled Report on risk-informed in-service inspection and in-service testing (EUR 19153 EN). In November 2001, the NRWG held a Special session on risk-informed applications, with emphasis on risk-informed inservice inspection, where results and experiences from pilot studies on risk-informed inservice inspection (RI-ISI), performed in several European countries, were presented and discussed. As a follow-up in May 2002, the TF was reconvened with the objectives to analyse from the regulatory point of view key aspects associated with the application of risk-informed inservice inspection, and to go beyond a state of the art report, presenting a series of recommendations of good practices or common positions reached by the regulators represented in the Task Force. (author)

  1. 7 CFR 301.91-7 - Assembly and inspection of regulated articles.

    Science.gov (United States)

    2010-01-01

    ... Inspectors are assigned to local offices of Plant Protection and Quarantine which are listed in telephone... Inspection Service, Plant Protection and Quarantine, Domestic and Emergency Operations, 4700 River Road Unit... PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE DOMESTIC QUARANTINE NOTICES European Larch...

  2. Child health service provision in Ethiopia: Outpatient, growth ...

    African Journals Online (AJOL)

    EPHA USER33

    for sick children, routine childhood vaccination services (EPI), and routine growth monitoring services) as a package. ... Government facilities mostly provide all three basic child health services. Among all .... All data editing programs were.

  3. National Mental Health Services Survey (N-MHSS-2010)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Mental Health Services Survey (N-MHSS) is an annual survey designed to collect statistical information on the numbers and characteristics of all known...

  4. Making mental health services accessible for rural Kenyans | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    New research from the Africa Mental Health Foundation (AMHF), funded by the Global ... In 2004 he founded AMHF to address this gap in services. ... in an informal urban settlement to determine whether this strategy for mental health service ...

  5. Automated ultrasonic testing of nuclear reactor welds and overlays in pre-service and in-service inspections

    International Nuclear Information System (INIS)

    Sladky, J.

    1988-01-01

    Since 1982, automatic pre-service and in-service checks are being made of welded joints and overlays on pressure vessels of WWER-440 nuclear reactors in Czechoslovakia. This is being done using the SKODA REACTORTEST TRC facility which is used for checking peripheral welded joints on the pressure vessel, neck joints, overlays in other selected areas of the cylindrical section of the pressure vessel, on radius transitions of the pressure vessel and of necks, and on the cylindrical part of necks, and also for checking the base material in selected parts of the pressure vessel and the base material of the neck extension piece. The tests are of two types, namely tests of peripheral welds and overlays of the cylindrical parts of the pressure vessel, and tests of the necks. Different ultrasonic probe holders are used for the tests, with totally different design. Ultrasonic probes which were initially used were of foreign make while at present, those of Czechoslovak make are used. For each pressure vessel a set of ultrasonic probes is used which should suffice for the life of the vessel. Experience gained so far is being used in work on the project of a new device for testing nuclear reactor presure vessels from the inside. (Z.M.)

  6. A comprehensive health service evaluation and monitoring framework.

    Science.gov (United States)

    Reeve, Carole; Humphreys, John; Wakerman, John

    2015-12-01

    To develop a framework for evaluating and monitoring a primary health care service, integrating hospital and community services. A targeted literature review of primary health service evaluation frameworks was performed to inform the development of the framework specifically for remote communities. Key principles underlying primary health care evaluation were determined and sentinel indicators developed to operationalise the evaluation framework. This framework was then validated with key stakeholders. The framework includes Donabedian's three seminal domains of structure, process and outcomes to determine health service performance. These in turn are dependent on sustainability, quality of patient care and the determinants of health to provide a comprehensive health service evaluation framework. The principles underpinning primary health service evaluation were pertinent to health services in remote contexts. Sentinel indicators were developed to fit the demographic characteristics and health needs of the population. Consultation with key stakeholders confirmed that the evaluation framework was applicable. Data collected routinely by health services can be used to operationalise the proposed health service evaluation framework. Use of an evaluation framework which links policy and health service performance to health outcomes will assist health services to improve performance as part of a continuous quality improvement cycle. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  7. Home health services in primary care: What can we do?

    Directory of Open Access Journals (Sweden)

    Yasemin Çayır

    2013-01-01

    Full Text Available Home health services is to give examination, diagnosis,treatment, and rehabilitation services to the patients whobedridden, have difficulties to access health facility due toa variety of chronic or malignant disease by professionalhealth care team. Family physicians that providing healthcare in primary care is responsible for to determine whowill need home health care services, and to make homevisit on a regular basis among registered patients in theirpopulations. It is seems that the biggest shortcoming thecontent and scope of this service is not yet a standard. Inthis article, how home health services should be given willbe discussed.Key words: Primary health care, home health care, bedriddenpatient

  8. Effects of the regulatory inspections on nuclear medicine services executed by the Radioprotection and Dosimetry Services, Brazil

    International Nuclear Information System (INIS)

    Alves, C.E.G.R.; Farias, C.; Azevedo, E.M.; Nanni, G.J.; Vasconcellos, L.; Mendes, L.C.G.; Souza, L.A.C.; Franca, W.F.L.; Goncalves, M.

    2005-01-01

    The advances in the Nuclear Medicine auditing field performed by Nuclear Medicine Group of the Radiotherapy and Nuclear Medicine Division of the Institute of Radiation Protection and Dosimetry are shown. The main aspects observed during the auditing are presented as well as the evolution of the non-conformities. Its is also shown that the occurrence of these non-conformities decreases year by year, primarily as a function of the severity of the auditing and the consciousness of the personal of Nuclear Medicine Services. Results point clearly to the importance of the coercion actions to guarantee a radiation protection level in compliance with the standards established by the Brazilian Nuclear Energy Commission. (author)

  9. Dysfunctional health service conflict: causes and accelerants.

    Science.gov (United States)

    Nelson, H Wayne

    2012-01-01

    This article examines the causes and accelerants of dysfunctional health service conflict and how it emerges from the health system's core hierarchical structures, specialized roles, participant psychodynamics, culture, and values. This article sets out to answer whether health care conflict is more widespread and intense than in other settings and if it is, why? To this end, health care power, gender, and educational status gaps are examined with an eye to how they undermine open communication, teamwork, and collaborative forms of conflict and spark a range of dysfunctions, including a pervasive culture of fear; the deny-and-defend lawsuit response; widespread patterns of hierarchical, generational, and lateral bullying; overly avoidant conflict styles among non-elite groups; and a range of other behaviors that lead to numerous human resource problems, including burnout, higher staff turnover, increased errors, poor employee citizenship behavior, patient dissatisfaction, increased patient complaints, and lawsuits. Bad patient outcomes include decreased compliance and increased morbidity and mortality. Health care managers must understand the root causes of these problems to treat them at the source and implement solutions that avoid negative conflict spirals that undermine organizational morale and efficiency.

  10. Qualitative Methods in Mental Health Services Research

    Science.gov (United States)

    Palinkas, Lawrence A.

    2014-01-01

    Qualitative and mixed methods play a prominent role in mental health services research. However, the standards for their use are not always evident, especially for those not trained in such methods. This paper reviews the rationale and common approaches to using qualitative and mixed methods in mental health services and implementation research based on a review of the papers included in this special series along with representative examples from the literature. Qualitative methods are used to provide a “thick description” or depth of understanding to complement breadth of understanding afforded by quantitative methods, elicit the perspective of those being studied, explore issues that have not been well studied, develop conceptual theories or test hypotheses, or evaluate the process of a phenomenon or intervention. Qualitative methods adhere to many of the same principles of scientific rigor as quantitative methods, but often differ with respect to study design, data collection and data analysis strategies. For instance, participants for qualitative studies are usually sampled purposefully rather than at random and the design usually reflects an iterative process alternating between data collection and analysis. The most common techniques for data collection are individual semi-structured interviews, focus groups, document reviews, and participant observation. Strategies for analysis are usually inductive, based on principles of grounded theory or phenomenology. Qualitative methods are also used in combination with quantitative methods in mixed method designs for convergence, complementarity, expansion, development, and sampling. Rigorously applied qualitative methods offer great potential in contributing to the scientific foundation of mental health services research. PMID:25350675

  11. Integrating complementary and alternative medicine into mainstream healthcare services: the perspectives of health service managers.

    Science.gov (United States)

    Singer, Judy; Adams, Jon

    2014-05-22

    Complementary and alternative medicine (CAM) is increasingly included within mainstream integrative healthcare (IHC) services. Health service managers are key stakeholders central to ensuring effective integrative health care services. Yet, little research has specifically investigated the role or perspective of health service managers with regards to integrative health care services under their management. In response, this paper reports findings from an exploratory study focusing exclusively on the perspectives of health service managers of integrative health care services in Australia regarding the role of CAM within their service and the health service managers rational for incorporating CAM into clinical care. Health service managers from seven services were recruited using purposive and snowball sampling. Semi-structured interviews were conducted with the health service managers. The services addressed trauma and chronic conditions and comprised: five community-based programs including drug and alcohol rehabilitation, refugee mental health and women's health; and two hospital-based specialist services. The CAM practices included in the services investigated included acupuncture, naturopathy, Western herbal medicine and massage. Findings reveal that the health service managers in this study understand CAM to enhance the holistic capacity of their service by: filling therapeutic gaps in existing healthcare practices; by treating the whole person; and by increasing healthcare choices. Health service managers also identified CAM as addressing therapeutic gaps through the provision of a mind-body approach in psychological trauma and in chronic disease management treatment. Health service managers describe the addition of CAM in their service as enabling patients who would otherwise not be able to afford CAM to gain access to these treatments thereby increasing healthcare choices. Some health service managers expressly align the notion of treating the whole person

  12. Area health education centers and health science library services.

    Science.gov (United States)

    West, R T; Howard, F H

    1977-07-01

    A study to determine the impact that the Area Health Education Center type of programs may have on health science libraries was conducted by the Extramural Programs, National Library of Medicine, in conjunction with a contract awarded by the Bureau of Health Manpower, Health Resources Administration, to develop an inventory of the AHEC type of projects in the United States. Specific study tasks included a review of these programs as they relate to library and information activities, on-site surveys on the programs to define their needs for library services and information, and a categorization of library activities. A major finding was that health science libraries and information services are generally not included in AHEC program planning and development, although information and information exchange is a fundamental part of the AHEC type of programs. This study suggests that library inadequacies are basically the result of this planning failure and of a lack of financial resources; however, many other factors may be contributory. The design and value of library activities for these programs needs explication.

  13. Mental Health Services in South Africa: Taking stock | Lund | African ...

    African Journals Online (AJOL)

    Mental Health Services in South Africa: Taking stock. ... This provides an opportunity to take stock of our mental health services. At primary care level key challenges include- training and ... on evaluating interventions. With current policy commitment, the time to act and invest in evidence-based mental health services is now.

  14. 77 FR 76052 - Health Resources and Services Administration

    Science.gov (United States)

    2012-12-26

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration Agency..., Public Law 104-13), the Health Resources and Services Administration (HRSA) publishes periodic summaries... Administration (HRSA) plans to conduct a survey of the National Practitioner Data Bank and the Healthcare...

  15. Health Service Utilization in Amhara Region of Ethiopia | Fantahun ...

    African Journals Online (AJOL)

    Background: Information on health service utilization is crucial for planning, organizing and evaluation of health services. Objective: Assess perceived morbidity and examine the factors associated with utilization of health services by a sample of the population of the Amhara Region. Methods: Questionnaire was ...

  16. 38 CFR 3.753 - Public Health Service.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Public Health Service. 3... Pension, Compensation, and Dependency and Indemnity Compensation Retirement § 3.753 Public Health Service... of the Public Health Service, who was receiving disability compensation on December 31, 1956, as...

  17. 19 CFR 4.70 - Public Health Service requirements.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Public Health Service requirements. 4.70 Section 4... THE TREASURY VESSELS IN FOREIGN AND DOMESTIC TRADES Foreign Clearances § 4.70 Public Health Service... Public Health Service. [T.D. 00-4, 65 FR 2874, Jan. 19, 2000] ...

  18. 38 CFR 17.98 - Mental health services.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Mental health services... Outpatient Treatment § 17.98 Mental health services. (a) Following the death of a veteran, bereavement... mental health services in connection with treatment of the veteran under 38 U.S.C. 1710, 1712, 1712A...

  19. Liberalisation of Trade in Health Services and the Implication for ...

    African Journals Online (AJOL)

    ... hence proxy measure of health services were utilised in the paper and this might blur the expected impacts. The implication of the paper is for African countries to adequately participate in GATS as it involves trade in health services. Key Words: Liberalisation, health system, mortality, services supply modes, WTO, general ...

  20. Function Model for Community Health Service Information

    Science.gov (United States)

    Yang, Peng; Pan, Feng; Liu, Danhong; Xu, Yongyong

    In order to construct a function model of community health service (CHS) information for development of CHS information management system, Integration Definition for Function Modeling (IDEF0), an IEEE standard which is extended from Structured Analysis and Design(SADT) and now is a widely used function modeling method, was used to classifying its information from top to bottom. The contents of every level of the model were described and coded. Then function model for CHS information, which includes 4 super-classes, 15 classes and 28 sub-classed of business function, 43 business processes and 168 business activities, was established. This model can facilitate information management system development and workflow refinement.

  1. In-service inspection of condenser tubes by means of electrochemical methods

    International Nuclear Information System (INIS)

    Taelemans, G.

    The commissioning of an increasing number of large nuclear power plants involves an increased significance of such condenser tube problems as: - erosion on tube ends, - generalized corrosion and pitting corrosion, - deposits in the tubes. In order to solve such problems, investigations were performed especially focused on a measurement technique that enables in-service behaviour of condenser tubes to be monitored. For such a purpose, measurement of the polarization resistance has been adopted. The existing corrosion products and scaled-off iron oxides were eliminated by means of a carborundum balls processing, as clearly appears from polarization resistance reduction. Then iron sulphate was injected in order to build a new and better protective layer. In addition, the tube was kept clean by means of foam rubber balls. There is a second implementation area: fouled condenser tubes. A significant polarization resistance reduction is noted during the acid cleaning. (orig.) [de

  2. Focus on vulnerable populations and promoting equity in health service utilization ––an analysis of visitor characteristics and service utilization of the Chinese community health service

    OpenAIRE

    Dong, Xiaoxin; liu, Ling; Cao, Shiyi; Yang, Huajie; Song, Fujian; Yang, Chen; Gong, Yanhong; Wang, Yunxia; Yin, Xiaoxu; Xie, Jun; Sun, Yi; Lu, Zuxun

    2014-01-01

    Background Community health service in China is designed to provide a convenient and affordable primary health service for the city residents, and to promote health equity. Based on data from a large national study of 35 cities across China, we examined the characteristics of the patients and the utilization of community health institutions (CHIs), and assessed the role of community health service in promoting equity in health service utilization for community residents. Methods Multistage sa...

  3. 78 FR 50144 - Health Services Research and Development Service, Scientific Merit Review Board; Notice of Meeting

    Science.gov (United States)

    2013-08-16

    ... DEPARTMENT OF VETERANS AFFAIRS Health Services Research and Development Service, Scientific Merit... management, and nursing research. Applications are reviewed for scientific and technical merit, mission... Advisory Committee Act, 5 U.S.C. App. 2, that the Health Services Research and Development Service (HSR&D...

  4. 77 FR 42365 - Health Services Research and Development Service Scientific Merit Review Board, Notice of Meeting

    Science.gov (United States)

    2012-07-18

    ... DEPARTMENT OF VETERANS AFFAIRS Health Services Research and Development Service Scientific Merit...-463 (Federal Advisory Committee Act) that various subcommittees of the Health Services Research and Development Service Scientific Merit Review Board will meet on August 28-30, 2012, at the Boston Omni Parker...

  5. Role of in-service inspection and maintenance in reliability assurance of concrete structures in nuclear plants

    International Nuclear Information System (INIS)

    Ellingwood, B.R.; Mori, Y.

    1993-01-01

    The degradation in strength of a component with random damage is evaluated using a growth model for individual damages which can be obtained from experimental data. The distribution function of damage intensity after inspection and repair is updated using a Bayesian analysis that takes the quality of inspection into account. With this posterior distribution, the time-dependent strength after the inspection and repair can be evaluated. Time-dependent reliability analysis can be used to determine inspection/repair strategies that are necessary to keep the failure probability of the component lower than an established target. (author)

  6. Macroeconomic Reasons of Debts in Polish Health Service

    Directory of Open Access Journals (Sweden)

    Kamila Szymańska

    2008-04-01

    Full Text Available The article deals with the problem of debts in polish health service. Author analyzes the macroeconomic reasons of this situation. As a main reasons are indicated: a specificity of the health service market, which leads to a inefficient allocation of health services, lack of reliable data on health care system, too low level of public expenditure on a health care, inappropriate allocation of public capital and a monopolistic position of the payer.

  7. The experiences of health services research and health services research training in Korea.

    Science.gov (United States)

    Moon, O R

    1984-12-01

    Early in the 1970s the Korean government recognized the necessity of Health Services Research (HSR). The law of the Korea Health Development Institute was promulgated in 1975, and a contribution from the Republic was combined with an Agency for International Development loan to field test low-cost health service strategies. A program to deploy Community Health Practitioners (CHPs), similar to family nurse practitioners or Medex has been demonstrated to be effective. The CHP training program grew from 9 in 1980 to 1343 in 1984. CHP's main functions are curative, preventive, educative, and administrative. They are selected registered nurses and/or midwives, where possible from serviced communities. They are trained in 24 weeks, including 12 weeks of clinical practice, in an anticipated recruiting post. CHPs help train village health volunteers (VHVs), who are literate women chosen by their communities. They work closely with the CHPs as a liaison with the village and in information gathering. An HSR orientation workshop held in Chuncheon in 1980, discussed role, policy, status, finance components, information systems, behavioral and manpower components, staff training, protocols for project development, HSR in the future and evaluation of the conference. In 1980, a National Workshop on Biomedical Research Methodology was also held, with World Health Organization and Korean consultants. Training of junior scientists would include introduction to scientific method, statement of problems, quantitative study technics, research proposals, and interpretation of results. The Korean Institute of Public Health sponsored a 1982 experts forum on the health care system, medical facilities, organizational management, financing and medical security, and health behavioral aspects. Training of trainers and lower level field workers, orientation of program managers, researchers, and communities themselves should all be training priorities. In future, CHPs should be refresher

  8. An in-service inspection method: the use of focused probes for the detection and sizing in DDT Plates 1 and 2

    International Nuclear Information System (INIS)

    Birac, A.M.; Pincemaille, G.; Saglio, R.; Cattiauz, G.; Morisseau, P.

    1983-01-01

    As part of the DDT programme to evaluate the nondestructive testing methods used during the in-service inspection (ISI) of PWR vessels, the UKAEA asked the CEA-STA-SCND to perform the ultrasonic examination of two test-plates. Each plate was bisected across its full width by a full-thickness butt-weld in which calibrated defects of various natures, dimensions, orientations have been inserted. It was required that the implementation of control, the equipment and the subsequent data analysis represent as nearly as possible the French procedure in force during the pre-service and in-service inspection of a PWR vessel. As suggested by the UKAEA, to evaluate the influence of examiners on the results, the examinations have been carried out twice by two independent teams: one from the CEA-STA-SCND and the second from INTERCONTROLE (a CEA subsidiary company). Procedure and results are given. (author)

  9. Mental health services in KwaZulu-Natal | Mkize | South African ...

    African Journals Online (AJOL)

    ... is divided into nine sections, namely organisational structure; education, training and research; mental health service provision; highly specialised services; community mental health services; forensic mental health services; mental health and the private sector; pharmaceutical services; and summary of recommendations.

  10. Service quality and clinical outcomes: an example from mental health rehabilitation services in England.

    Science.gov (United States)

    Killaspy, Helen; Marston, Louise; Omar, Rumana Z; Green, Nicholas; Harrison, Isobel; Lean, Melanie; Holloway, Frank; Craig, Tom; Leavey, Gerard; King, Michael

    2013-01-01

    Current health policy assumes better quality services lead to better outcomes. To investigate the relationship between quality of mental health rehabilitation services in England, local deprivation, service user characteristics and clinical outcomes. Standardised tools were used to assess the quality of mental health rehabilitation units and service users' autonomy, quality of life, experiences of care and ratings of the therapeutic milieu. Multiple level modelling investigated relationships between service quality, service user characteristics and outcomes. A total of 52/60 (87%) National Health Service trusts participated, comprising 133 units and 739 service users. All aspects of service quality were positively associated with service users' autonomy, experiences of care and therapeutic milieu, but there was no association with quality of life. Quality of care is linked to better clinical outcomes in people with complex and longer-term mental health problems. Thus, investing in quality is likely to show real clinical gains.

  11. Capability evaluation of Eddy current and ultrasonic in-service inspections of steam generator tubes. A status report of PISC III Action 5

    International Nuclear Information System (INIS)

    Bieth, M.; Birac, C.; Comby, R.

    1998-01-01

    Document summarizes the PISC III (Programme for the Inspection of Steel Components) report No. 41, full description of the PISC III Action 5 on Steam Generator Tubes Inspection, containing all details and final conclusions which are still to be approved by the PISC III Management Board. The report was prepared by the reference laboratory of PISC under guidance and with continuous contribution of the members of the Data Analysis Group (DAG) of this PISC III. There were several procedures which demonstrated good detection capability of major flaws in typical locations of the steam generator. Conclusions of the exercise indicate that capability demonstration is necessary to qualify in service inspection procedures for steam generator tubes

  12. A periodic review integrated inventory model with controllable setup cost, imperfect items, and inspection errors under service level constraint

    Science.gov (United States)

    Saga, R. S.; Jauhari, W. A.; Laksono, P. W.

    2017-11-01

    This paper presents an integrated inventory model which consists of single vendor and buyer. The buyer managed its inventory periodically and orders products from the vendor to satisfy the end customer’s demand, where the annual demand and the ordering cost were in the fuzzy environment. The buyer used a service level constraint instead of the stock-out cost term, so that the stock-out level per cycle was bounded. Then, the vendor produced and delivered products to the buyer. The vendor had a choice to commit an investment to reduce the setup cost. However, the vendor’s production process was imperfect, thus the lot delivered contained some defective products. Moreover, the buyer’s inspection process was not error-free since the inspector could be mistaken in categorizing the product’s quality. The objective was to find the optimum value for the review period, the setup cost, and the number of deliveries in one production cycle which might minimize the joint total cost. Furthermore, the algorithm and numerical example were provided to illustrate the application of the model.

  13. Health insurance and health services utilization in Ireland.

    Science.gov (United States)

    Harmon, C; Nolan, B

    2001-03-01

    The numbers buying private health insurance in Ireland have continued to grow, despite a broadening in entitlement to public care. About 40% of the population now have insurance, although everyone has entitlement to public hospital care. In this paper, we examine in detail the growth in insurance coverage and the factors underlying the demand for insurance. Attitudinal responses reveal the importance of perceptions about waiting times for public care, as well as some concerns about the quality of that care. Individual characteristics, such as education, age, gender, marital status, family composition and income all influence the probability of purchasing private insurance. We also examine the relationship between insurance and utilization of hospital in-patient services. The positive effect of private insurance appears less than that of entitlement to full free health care from the state, although the latter is means-tested, and may partly represent health status. Copyright 2001 John Wiley & Sons, Ltd.

  14. Adolescents perception of reproductive health care services in Sri Lanka.

    Science.gov (United States)

    Agampodi, Suneth B; Agampodi, Thilini C; Ukd, Piyaseeli

    2008-05-03

    Adolescent health needs, behaviours and expectations are unique and routine health care services are not well geared to provide these services. The purpose of this study was to explore the perceived reproductive health problems, health seeking behaviors, knowledge about available services and barriers to reach services among a group of adolescents in Sri Lanka in order to improve reproductive health service delivery. This qualitative study was conducted in a semi urban setting in Sri Lanka. A convenient sample of 32 adolescents between 17-19 years of age participated in four focus group discussions. Participants were selected from four midwife areas. A pre-tested focus group guide was used for data collection. Male and female facilitators conducted discussions separately with young males and females. All tape-recorded data was fully transcribed and thematic analysis was done. Psychological distresses due to various reasons and problems regarding menstrual cycle and masturbation were reported as the commonest health problems. Knowledge on existing services was very poor and boys were totally unaware of youth health services available through the public health system. On reproductive Health Matters, girls mainly sought help from friends whereas boys did not want to discuss their problems with anyone. Lack of availability of services was pointed out as the most important barrier in reaching the adolescent needs. Lack of access to reproductive health knowledge was an important reason for poor self-confidence among adolescents to discuss these matters. Lack of confidentiality, youth friendliness and accessibility of available services were other barriers discussed. Adolescents were happy to accept available services through public clinics and other health infrastructure for their services rather than other organizations. A demand was made for separate youth friendly services through medical practitioners. Adolescent health services are inadequate and available services

  15. Maternal health service utilization in urban slums of selected towns ...

    African Journals Online (AJOL)

    EPHA USER33

    Medicine, School of Public Health, College of Health Sciences, Addis Ababa University, Addis Ababa, Ethiopia; ... still women in urban settings do not use available maternal health services. Especially ... health services, safe water supplies, poor sanitation and .... selected cities are confined to crowded places, lack of.

  16. 38 CFR 18.452 - Health and other social services.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Health and other social...-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 Nondiscrimination on the Basis of Handicap Health and Social Services § 18.452 Health and other social services. (a) General. In providing health, or other...

  17. Most Individuals Receive Health Services a Year Before Suicide Death

    Science.gov (United States)

    ... Groups (24 items) Men’s Mental Health (12 items) Women’s Mental Health (16 items) Military Service Members (6 items) Older ... Groups (24 items) Men’s Mental Health (12 items) Women’s Mental Health (16 items) Military Service Members (6 items) Older ...

  18. A pilot application of risk-based methods to establish in-service inspection priorities for nuclear components at Surry Unit 1 Nuclear Power Station

    International Nuclear Information System (INIS)

    Vo, T.; Gore, B.; Simonen, F.; Doctor, S.

    1994-08-01

    As part of the Nondestructive Evaluation Reliability Program sponsored by the US Nuclear Regulatory Commission, the Pacific Northwest Laboratory is developing a method that uses risk-based approaches to establish in-service inspection plans for nuclear power plant components. This method uses probabilistic risk assessment (PRA) results and Failure Modes and Effects Analysis (FEMA) techniques to identify and prioritize the most risk-important systems and components for inspection. The Surry Nuclear Power Station Unit 1 was selected for pilot applications of this method. The specific systems addressed in this report are the reactor pressure vessel, the reactor coolant, the low-pressure injection, and the auxiliary feedwater. The results provide a risk-based ranking of components within these systems and relate the target risk to target failure probability values for individual components. These results will be used to guide the development of improved inspection plans for nuclear power plants. To develop inspection plans, the acceptable level of risk from structural failure for important systems and components will be apportioned as a small fraction (i.e., 5%) of the total PRA-estimated risk for core damage. This process will determine target (acceptable) risk and target failure probability values for individual components. Inspection requirements will be set at levels to assure that acceptable failure probabilistics are maintained

  19. Use of fees to fund local public health services in Western Massachusetts.

    Science.gov (United States)

    Shila Waritu, A; Bulzacchelli, Maria T; Begay, Michael E

    2015-01-01

    Recent budget cuts have forced many local health departments (LHDs) to cut staff and services. Setting fees that cover the cost of service provision is one option for continuing to fund certain activities. To describe the use of fees by LHDs in Western Massachusetts and determine whether fees charged cover the cost of providing selected services. A cross-sectional descriptive analysis was used to identify the types of services for which fees are charged and the fee amounts charged. A comparative cost analysis was conducted to compare fees charged with estimated costs of service provision. Fifty-nine LHDs in Western Massachusetts. Number of towns charging fees for selected types of services; minimum, maximum, and mean fee amounts; estimated cost of service provision; number of towns experiencing a surplus or deficit for each service; and average size of deficits experienced. Enormous variation exists both in the types of services for which fees are charged and fee amounts charged. Fees set by most health departments did not cover the cost of service provision. Some fees were set as much as $600 below estimated costs. These results suggest that considerations other than costs of service provision factor into the setting of fees by LHDs in Western Massachusetts. Given their limited and often uncertain funding, LHDs could benefit from examining their fee schedules to ensure that the fee amounts charged cover the costs of providing the services. Cost estimates should include at least the health agent's wage and time spent performing inspections and completing paperwork, travel expenses, and cost of necessary materials.

  20. Factors associated with regulatory action involving investigation of illnesses associated with Shiga toxin-producing Escherichia coli in products regulated by the Food Safety and Inspection Service.

    Science.gov (United States)

    Green, Alice L; Seys, Scott; Douris, Aphrodite; Levine, Jeoff; Robertson, Kis

    2014-07-01

    We described characteristics of the Escherichia coli O157 and Escherichia coli non-O157 illness investigations conducted by the United States Department of Agriculture's Food Safety and Inspection Service (FSIS) during the 5-year period from 2006 through 2010. We created a multivariable logistic regression model to determine characteristics of these investigations that were associated with FSIS regulatory action, which was defined as having occurred if a product recall occurred or if FSIS personnel performed an environmental health assessment (Food Safety Assessment) at the implicated establishment. During this period, FSIS took regulatory action in 38 of 88 (43%) investigations. Illness investigations in which FoodNet states were involved were more likely to result in regulatory action. Illness investigations in which state and local traceback, or FSIS traceback occurred were more likely to result in regulatory action. Reasons for lack of action included evidence of cross-contamination after the product left a regulated establishment, delayed notification, lack of epidemiological information, and insufficient product information.

  1. Summary Report - Inspections of DoD Facilities and Military Housing and Audits of Base Operations and Support Services Contracts

    Science.gov (United States)

    2016-10-14

    drinking water quality, radon, pest management, mold, and radiation. In addition, during the Japan and Korea inspections, we evaluated the management...Components responsible for facilities management conduct such analyses and use the results of these root cause analyses to improve facility management...water quality, radon, mold, pest infestation, lead-based paint, asbestos, and radiation) requirements. These inspections should be conducted by

  2. Improving high quality, equitable maternal health services in Malawi ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Improving high quality, equitable maternal health services in Malawi (IMCHA) ... In response, the Ministry of Health implemented a Standards-Based Management and Recognition for Reproductive Health initiative to improve ... Total funding.

  3. Barriers to the successful implementation of school health services ...

    African Journals Online (AJOL)

    2009-08-14

    Aug 14, 2009 ... Background: The level of development of a country is measured by the health status of its children. ... initiative and its interrelatedness to school health services ... children's health, knowledge and practices target schools.

  4. Marriage, Cohabitation, and Men's Use of Preventive Health Care Services

    Science.gov (United States)

    ... from the 2011–2012 National Health Interview Survey (NHIS), selected measures of preventive health care service use ... any gender and age. Data source and methods NHIS is a multipurpose health survey conducted continuously throughout ...

  5. Developing a culturally appropriate mental health care service for Samoa.

    Science.gov (United States)

    Enoka, Matamua Iokapeta Sina; Tenari, Aliilelei; Sili, Tupou; Peteru, Latama; Tago, Pisaina; Blignault, Ilse

    2013-06-01

    Mental Health Care Services are part of the National Health Services for Samoa. Their function is to provide mental health care services to the population of Samoa, which numbers 180,000 people. However, like many other countries in the Pacific region, mental health is considered a low priority. The mental health budget allocation barely covers the operation of mental health care services. More broadly, there is a lack of political awareness about mental health care services and mental health rarely becomes an issue of deliberation in the political arena. This article outlines the recent development of mental health care services in Samoa, including the Mental Health Policy 2006 and Mental Health Act 2007. It tells the story of the successful integration of aiga (family) as an active partner in the provision of care, and the development of the Aiga model utilizing Samoan cultural values to promote culturally appropriate family-focused community mental health care for Samoa. Mental Health Care Services today encompass both clinical and family-focused community mental health care services. The work is largely nurse-led. Much has been achieved over the past 25 years. Increased recognition by government and increased resourcing are necessary to meet the future health care needs of the Samoan people. Copyright © 2012 Wiley Publishing Asia Pty Ltd.

  6. Assimilation and health service utilization of Korean immigrant women.

    Science.gov (United States)

    Son, Juyeon

    2013-11-01

    In this case study, I present descriptive findings with regard to immigrant incorporation and health service utilization. Using focus groups and survey of Korean immigrant women in Wisconsin, I examine whether the ways in which they adapt to the U.S. society is relevant to their health services utilization and the alternatives they seek when available health services are less than satisfactory. The findings suggest that adherence to Korean identity appears to be associated with health service utilization. This is evident in the immigrants' evaluation of the U.S. health services as compared to those of Korea, and the consideration given by these immigrants to seeking health services in Korea instead of the United States. Such concerns on the part of these immigrants have important implications for health researchers, as they highlight the significance of immigrants' transnational experiences and their sense of personal agency in the use of health care.

  7. Experience with ANSI N14.30 for in-service inspections of semi-trailer used for spent fuel shipments

    International Nuclear Information System (INIS)

    Hirtz, G.J.

    1998-05-01

    On July 18, 1996, the Oak Ridge National Laboratory (ORNL) resumed shipping spent fuel in interstate commerce after a 10 year suspension of this activity. This shipment was conducted using a Nuclear Regulatory Commission licensed spent fuel transport package purchased from General Electric Company by ORNL for the purpose of moving High Flux Isotope Reactor spent fuel to the Savannah River Site. The trailer, fabricated to the ANSI N14.30, Semi-Trailers Employed in the Highway Transport of Weight Concentrated Radioactive Loads Design, Fabrication, and Maintenance, has recently undergone its first scheduled in-service inspection. This paper presents the experience gained from interpretation and application of the ANSI N14.30 standard focusing on the in-service inspection for the structure of the trailer. Initially, the term weight concentrated is illustrated giving detail to the location and center of gravity of the 33,500 pound shipping container and forces induced by the tie down system. Basic information about the design stresses and initial testing provided by the manufacturer are used as a lead-in to the requirements of the standard. The task of examining the trailer structure provided many lessons and required considerable effort. All of the support personnel were provided by ORNL; the garage mechanics and the certified inspection engineers had never been involved in applying ANSI N14.30. Other obstacles were the lack of existing inspection procedures for this particular activity and the lack of a previous experience interpreting the standard with regard to repair work. Some of these questions were resolved by clarification received from the writers of the standard, and others were resolved by the teamwork between the manufacturer and ORNL. This experience illustrated the importance of the trailer manufacturer as a participant in the decisions made concerning in-service inspection and maintenance

  8. Users' views of prison health services: a qualitative study.

    Science.gov (United States)

    Condon, Louise; Hek, Gill; Harris, Francesca; Powell, Jane; Kemple, Terry; Price, Sally

    2007-05-01

    This paper is a report of a study of the views of prisoners about health services provided in prisons. Prison provides an opportunity for a 'hard to reach' group to access health services, primarily those provided by nurses. Prisoners typically have high health and social needs, but the views and experiences of prisoners about health services in prison have not been widely researched. Semi-structured interviews were carried out with 111 prisoners in purposively selected 12 prisons in England in 2005. Interviews covered both prisoners' views of health services and their own ways of caring for their health in prison. Interviews were analysed to develop a conceptual framework and identify dominant themes. Prisoners considered health services part of a personal prison journey, which began at imprisonment and ended on release. For those who did not access health services outside prison, imprisonment improved access to both mental and physical health services. Prisoners identified accessing services, including those provided by nurses, confidentiality, being seen as a 'legitimate' patient and living with a chronic condition as problems within the prison healthcare system. At all points along the prison healthcare journey, the prison regime could conflict with optimal health care. Lack of autonomy is a major obstacle to ensuring that prisoners' health needs are fully met. Their views should be considered when planning, organizing and delivering prison health services. Further research is needed to examine how nurses can ensure a smooth journey through health care for prisoners.

  9. Automated ultrasonic inspection of nuclear plant components

    International Nuclear Information System (INIS)

    Baron, J.A.; Dolbey, M.P.

    1982-01-01

    For reasons of safety and efficiency, automated systems are used in performing ultrasonic inspection of nuclear components. An automated system designed specifically for the inspection of headers in a nuclear plant is described. In-service inspection results obtained with this system are shown to correlate with pre-service inspection results obtained by manual methods

  10. Physical therapists familiarity and beliefs about health services utilization and health seeking behaviour.

    Science.gov (United States)

    Clewley, Derek; Rhon, Dan; Flynn, Tim; Koppenhaver, Shane; Cook, Chad

    2018-02-21

    Physical therapists' familiarity, perceptions, and beliefs about health services utilization and health seeking behaviour have not been previously assessed. The purposes of this study were to identify physical therapists' characteristics related to familiarity of health services utilization and health seeking behaviour, and to assess what health seeking behaviour factors providers felt were related to health services utilization. We administered a survey based on the Andersen behavioural model of health services utilization to physical therapists using social media campaigns and email between March and June of 2017. In addition to descriptive statistics, we performed binomial logistic regression analysis. We asked respondents to rate familiarity with health services utilization and health seeking behaviour and collected additional characteristic variables. Physical therapists are more familiar with health services utilization than health seeking behaviour. Those who are familiar with either construct tend to be those who assess for health services utilization, use health services utilization for a prognosis, and believe that health seeking behaviour is measurable. Physical therapists rated need and enabling factors as having more influence on health services utilization than predisposing and health belief factors. Physical therapists are generally familiar with health services utilization and health seeking behaviour; however, there appears to be a disconnect between what is familiar, what is perceived to be important, and what can be assessed for both health services utilization and health seeking behaviour. Copyright © 2018 Associação Brasileira de Pesquisa e Pós-Graduação em Fisioterapia. All rights reserved.

  11. Family Health Services project: the way forward.

    Science.gov (United States)

    Dabiri, O M

    1993-01-01

    Nigerians did not readily accept family planning when Family Health Services (FHS) began in 1988. FHS has made much headway in training, IEC (information, education, and communication), and constituency building and advocacy. Its staff have identified obstacles to implementation, especially program sustainability and management structure. Key limits to sustainability of IEC efforts were inadequately trained personnel and inability of trained personnel to apply what they learned at work stations. The Federal Ministry and Social Services' role in the FHS project was not clearly defined. Some private sector factors contributing to a confused management structure were inadequate method mix, high contraceptive cost, poor monitoring of quality of care, and no coordination of family planning training with the public factor. FHS has since decided to focus its efforts on increasing the demand for and availability of modern contraceptives and improving the quality of family planning services of both the public and private sectors. FHS hopes that accomplishing these activities will reduce fertility, morbidity, and mortality. Strategic plans include a regional focus, quality of care, a variety of methods offered, intensification, hospital and clinics, a management information system, contraceptive logistics, distribution regulations, and addressing social, cultural, and behavioral factors. To effectively implement the strategy, USAID and the Federal Ministry held a workshop in 1993 to effect full integration of Nigerian experience in the 2nd phase of the project (FHS II). Participants reviewed the strengths and weaknesses of the first phase and agreed on implementation. For example, nongovernmental organizations should implement FHS II. FHS II includes training, IEC, and commodities/logistics.

  12. Integrating reproductive and child health and HIV services in Tanzania

    African Journals Online (AJOL)

    Integrating reproductive and child health and HIV services in Tanzania: Implication to policy, systems and services. ... Experts around the world recognize the central role of Sexual and Reproductive Health (SRH) services in preventing HIV infection. Evidence suggests that improving access to contraception for women to ...

  13. Mental Health Service Providers: College Student Perceptions of Helper Effectiveness

    Science.gov (United States)

    Ackerman, Ashley M.; Wantz, Richard A.; Firmin, Michael W; Poindexter, Dawn C.; Pujara, Amita L.

    2014-01-01

    Undergraduate perceptions of the overall effectiveness of six types of mental health service providers (MHSPs) were obtained with a survey. Although many mental health services are available to consumers in the United States, research has indicated that these services are underutilized. Perceptions have been linked to therapeutic outcomes and may…

  14. Sanitary surveillance of ionizing radiations use in health services in Sao Paulo State, Brazil

    International Nuclear Information System (INIS)

    Aldred, Martha Aurelia; Eduardo, Maria Bernardete de Paula; Goncalves Junior, Nelson

    1997-01-01

    An evaluation of the Sanitarian Surveillance actions developed at Sao Paulo State, Brazil, concerning the control of ionizing radiation is presented. Aspects such as technical standards, inspection forms, assessment and quality assurance programs, in the fields of medical and dental radiology, radiotherapy and nuclear medicine are discussed. A program is also introduced for sample monitoring of these instruments. A set of protocol with criteria to be used in quality assurance programs, including equipment and procedures is presented. Participation of several societies of specialists and consumer defense organizations in the elaboration of technical regulations has contributed to concrete adoption by health care services

  15. Application of reliability techniques to prioritize BWR [boiling water reactor] recirculation loop welds for in-service inspection

    International Nuclear Information System (INIS)

    Holman, G.S.

    1989-12-01

    In January 1988 the US Nuclear Regulatory Commission issued Generic Letter 88-01 together with NUREG-0313, Revision 2, ''Technical Report on Material Selection and Processing Guidelines for BWR Coolant Pressure Boundary Piping,'' to implement NRC long-range plans for addressing the problem of stress corrosion cracking in boiling water reactor piping. NUREG-0313 presents guidelines for categorizing BWR pipe welds according to their SCC condition (e.g., presence of known cracks, implementation of measures for mitigating SCC) as well as recommended inspection schedules (e.g., percentage of welds inspected, inspection frequency) for each weld category. NUREG-0313 does not, however, specify individual welds to be inspected. To address this issue, the Lawrence Livermore National Laboratory developed two recommended inspection samples for welds in a typical BWR recirculation loop. Using a probabilistic fracture mechanics model, LLNL prioritized loop welds on the basis of estimated leak probabilities. The results of this evaluation indicate that riser welds and bypass welds should be given priority attention over other welds. Larger-diameter welds as a group can be considered of secondary importance compared to riser and bypass welds. A ''blind'' comparison between the probability-based inspection samples and data from actual field inspections indicated that the probabilistic analysis generally captured the welds which the field inspections identified as warranting repair or replacement. Discrepancies between the field data and the analytic results can likely be attributed to simplifying assumptions made in the analysis. The overall agreement between analysis and field experience suggests that reliability techniques -- when combined with historical experience -- represent a sound technical basis on which to define meaningful weld inspection programs. 13 refs., 8 figs., 5 tabs

  16. Inspection Citations

    Data.gov (United States)

    U.S. Department of Health & Human Services — Disclosure of reporting citations provide the public with a rationale for the Agency’s enforcement actions and will also help to inform public and industry...

  17. Development and testing of VTT approach to risk-informed in-service inspection methodology. Final report of SAFIR INTELI INPUT Project RI-ISI

    International Nuclear Information System (INIS)

    Cronvall, O.; Maennistoe, I.; Simola, K.

    2007-04-01

    This report summarises the results of a research project on risk-informed in-service inspection (RI-ISI) methodology conducted in the Finnish national nuclear energy research programme SAFIR (2003-2006). The purpose of this work was to increase the accuracy of risk estimates used in RI-ISI analyses of nuclear power plant (NPP) piping systems, and to quantitatively evaluate the effects of different piping inspection strategies on risk. Piping failure occurrences were sampled by using probabilistic fracture mechanics (PFM) analyses. The PFM results for crack growth were used to construct transition matrices for a discrete-time Markov process model, which in turn was applied to examine the effects of various inspection strategies on the failure probabilities and risks. The applicability of the developed quantitative risk matrix approach was examined as a pilot study performed to the Shut-down cooling piping system 321 in NPP unit OL1 of Teollisuuden Voima Oy (TVO). The analysed degradation mechanisms were stress corrosion cracking (SCC) and thermal fatigue induced cracking (in the mixing points). Here a new and rather straightforward approach was developed to model thermal fatigue induced cracking, which degradation mechanism is much more difficult to model than SCC. This study further demonstrated the usefulness of Markov analysis procedure development by VTT in RI-ISI applications. The most important results are the quantified comparisons of different inspections strategies. It was shown in this study that Markov models are useful for this purpose, when combined with PFM analyses. While the numerical results could benefit from further considerations of inspection reliability, this does not affect the feasibility of the method itself. The approach can be used to identify an optimal inspection strategy for achieving a balanced risk profile of piping segments. (orig.)

  18. Prioritizing health services research: an economic perspective.

    Science.gov (United States)

    Gandjour, Afschin

    2016-05-01

    Given limited resources policymakers need to decide about how much and in what areas of health services research (HSR) to invest. The purpose of this study is to provide guidance for priority setting of HSR projects based on economic theory. The conceptual analysis starts from the premise that competition in health care is valuable-a position that seems to predominate among Western policymakers. The principle of competition rests on economic theory and, in particular, its branch of welfare economics. Based on economic theory, the role of HSR is to detect and alleviate information asymmetry, negative externalities, and harm caused by competition and inappropriate incentives for competition. A hierarchy of HSR projects is provided; following the ethical principle of harm ('do not harm'), the detection and prevention of harm would receive highest priority among HSR projects. Agreeing that competition is valuable in achieving efficiency and quality of care (and therefore agreeing to the assumptions of economic theory) implies accepting the role of HSR in detecting market failure and the HSR hierarchy as suggested. Disagreement would require an alternative coherent concept of improving efficiency and quality of care.

  19. The optimal amount and allocation of of sampling effort for plant health inspection

    NARCIS (Netherlands)

    Surkov, I.; Oude Lansink, A.G.J.M.; Werf, van der W.

    2009-01-01

    Plant import inspection can prevent the introduction of exotic pests and diseases, thereby averting economic losses. We explore the optimal allocation of a fixed budget, taking into account risk differentials, and the optimal-sized budget to minimise total pest costs. A partial-equilibrium market

  20. Qualification of NDT systems for in-service inspections of nuclear power plant pressure vessels; Ydinvoimalaitosten paineastioiden maeaeraeaikaistarkastuksissa kaeytettaevien NDT-jaerjestelmien paetevoeinti

    Energy Technology Data Exchange (ETDEWEB)

    Elfving, K

    1998-11-01

    The goal of this study is to determine the requirements of the in-service inspection qualification in Europe, their feasibility in practice and to find out possible manufacture defects in test pieces used in practical trials. The literature study consists of qualification requirements set by European regulatory bodies and by the European nuclear power utilities. Also a brief summary of qualification requirements set by ASME Code, Section XI and comparison between ASME and European qualification requirements is included 24 refs.

  1. A systematic review of the unit costs of allied health and community services used by older people in Australia

    Directory of Open Access Journals (Sweden)

    Farag Inez

    2013-02-01

    Full Text Available Abstract Background An economic evaluation of interventions for older people requires accurate assessment of costing and consideration of both acute and long-term services. Accurate information on the unit cost of allied health and community services is not readily available in Australia however. This systematic review therefore aims to synthesise information available in the literature on the unit costs of allied health and community services that may be utilised by an older person living in Australia. Method A comprehensive search of Medline, Embase, CINAHL, Google Scholar and Google was undertaken. Specialised economic databases were also reviewed. In addition Australian Government Department websites were inspected. The search identified the cost of specified allied health services including: physiotherapy, occupational therapy, dietetics, podiatry, counselling and home nursing. The range of community services included: personal care, meals on wheels, transport costs and domestic services. Where the information was not available, direct contact with service providers was made. Results The number of eligible studies included in the qualitative synthesis was fourty-nine. Calculated hourly rates for Australian allied health services were adjusted to be in equivalent currency and were as follows as follows: physiotherapy $157.75, occupational therapy $150.77, dietetics $163.11, psychological services $165.77, community nursing $105.76 and podiatry $129.72. Conclusions Utilisation of the Medicare Benefits Scheduled fee as a broad indicator of the costs of services, may lead to underestimation of the real costs of services and therefore to inaccuracies in economic evaluation.

  2. Health services reform in Bangladesh: hearing the views of health workers and their professional bodies

    OpenAIRE

    Cockcroft, Anne; Milne, Deborah; Oelofsen, Marietjie; Karim, Enamul; Andersson, Neil

    2011-01-01

    Abstract Background In Bangladesh, widespread dissatisfaction with government health services did not improve during the Health and Population Sector Programme (HPSP) reforms from 1998-2003. A 2003 national household survey documented public and health service users' views and experience. Attitudes and behaviour of health workers are central to quality of health services. To investigate whether the views of health workers influenced the reforms, we surveyed local health workers and held evide...

  3. Pricing health care services: applications to the health maintenance organization.

    Science.gov (United States)

    Sweeney, R E; Franklin, S P

    1986-01-01

    This article illustrates how management in one type of service industry, the health maintenance organization (HMO), have attempted to formalize pricing. This effort is complicated by both the intangibility of the service delivered and the relatively greater influence in service industries of non-cost price factors such as accessibility, psychology, and delays. The presentation describes a simple computerized approach that allows the marketing manager to formally estimate the effect of incremental changes in rates on the firm's projected patterns of enrollment growth and net revenues. The changes in turn reflect underlying variations in the mix of pricing influences including psychological and other factors. Enrollment projections are crucial to the firm's financial planning and staffing. In the past, most HMO enrollment and revenue projections of this kind were notoriously unreliable. The approach described here makes it possible for HMOs to fine-tune their pricing policies. It also provides a formal and easily understood mechanism by which management can evaluate and reach consensus on alternative scenarios for enrollment growth, staff recruitment and capacity expansion.

  4. Assessing STD Partner Services in State and Local Health Departments.

    Science.gov (United States)

    Cuffe, Kendra M; Leichliter, Jami S; Gift, Thomas L

    2018-02-07

    State and local health department STD programs provide several partner services to reduce disease transmission. Budget cuts and temporary staff reassignments for public health emergencies may affect the provision of partner services. Determining the impact of staffing reductions on STD rates and public health response should be further assessed.

  5. Community mental health services in Southern Gauteng: An audit ...

    African Journals Online (AJOL)

    Background: Community mental health services (CMHS) are a central objective of the National Mental Health Policy Framework and Strategic Plan. Three core components are described: residential facilities, day care and outpatient services. Primary mental health care with specialist support is required according to an ...

  6. Federal Program Encourages Health Service Innovations on Developmental Disabilities

    Science.gov (United States)

    Nix, Mary P.

    2009-01-01

    There is always room for improvement in the delivery of health services. This article discusses the U.S. Agency for Healthcare Research and Quality's (AHRQ) Health Care Innovations Exchange (www.innovations.ahrq.gov), a comprehensive program that aims to increase awareness of innovative strategies to meet health service delivery challenges and…

  7. Out-of-pocket payment for health services: constraints and ...

    African Journals Online (AJOL)

    Conclusion: This study brings to the fore the fact that most government employees and their dependants in Abakaliki have difficulties in accessing quality health care services via paying for them out-of-pocket. Keywords: Health services, payment, constraints, government employees. African Health Sciences 2011; 11(3): 481 ...

  8. 75 FR 27348 - Public Health Services Act; Delegation of Authority

    Science.gov (United States)

    2010-05-14

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Public Health Services Act; Delegation of Authority Notice is hereby given that I have delegated to the Director, Office of Public Health Preparedness and Response (OPHPR), with authority to redelegate, the authority to...

  9. Sex, Kids, and Politics. Health Services in Schools.

    Science.gov (United States)

    Emihovich, Catherine; Herrington, Carolyn D.

    This book examines practical, cultural, and political implications of placing health service programs in public schools, detailing three cases of Florida school districts, where a controversial statewide initiative for health services in schools recently went into effect. The plan supports programs to promote the health of medically underserved…

  10. An ultrasonic methodology for in-service inspection of shell weld of core support structure in a sodium cooled fast reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Anish, E-mail: anish@igcar.gov.in; Rajkumar, K.V.; Sharma, Govind K.; Dhayalan, R.; Jayakumar, T.

    2015-02-15

    Highlights: • We demonstrate a novel ultrasonic methodology for in-service inspection of shell weld of core support structure in a sodium cooled fast breeder reactor. • The methodology comprises of the inspection of shell weld immersed in sodium from the outside surface of the main vessel using ultrasonic guided wave. • The formation and propagation of guided wave modes are validated by finite element simulation of the inspection methodology. • A defect down to 20% of 30 mm thick wall (∼6 mm) in the shell weld can be detected reliably using the developed methodology. - Abstract: The paper presents a novel ultrasonic methodology developed for in-service inspection (ISI) of shell weld of core support structure of main vessel of 500 MWe prototype fast breeder reactor (PFBR). The methodology comprises of the inspection of shell weld immersed in sodium from the outsider surface of the main vessel using a normal beam longitudinal wave ultrasonic transducer. Because of the presence of curvature in the knuckle region of the main vessel, the normal beam longitudinal wave enters the support shell plate at an angle and forms the guided waves by mode conversion and multiple reflections from the boundaries of the shell plate. Hence, this methodology can be used to detect defects in the shell weld of the core support structure. The successful demonstration of the methodology on a mock-up sector made of stainless steel indicated that an artificial defect down to 20% of 30 mm thick wall (∼6 mm) in the shell weld can be detected reliably.

  11. Creating an innovative youth mental health service in the United Kingdom: The Norfolk Youth Service.

    Science.gov (United States)

    Wilson, Jon; Clarke, Tim; Lower, Rebecca; Ugochukwu, Uju; Maxwell, Sarah; Hodgekins, Jo; Wheeler, Karen; Goff, Andy; Mack, Robert; Horne, Rebecca; Fowler, David

    2017-08-04

    Young people attempting to access mental health services in the United Kingdom often find traditional models of care outdated, rigid, inaccessible and unappealing. Policy recommendations, research and service user opinion suggest that reform is needed to reflect the changing needs of young people. There is significant motivation in the United Kingdom to transform mental health services for young people, and this paper aims to describe the rationale, development and implementation of a novel youth mental health service in the United Kingdom, the Norfolk Youth Service. The Norfolk Youth Service model is described as a service model case study. The service rationale, national and local drivers, principles, aims, model, research priorities and future directions are reported. The Norfolk Youth Service is an innovative example of mental health transformation in the United Kingdom, comprising a pragmatic, assertive and "youth-friendly" service for young people aged 14 to 25 that transcends traditional service boundaries. The service was developed in collaboration with young people and partnership agencies and is based on an engaging and inclusive ethos. The service is a social-recovery oriented, evidence-based and aims to satisfy recent policy guidance. The redesign and transformation of youth mental health services in the United Kingdom is long overdue. The Norfolk Youth Service represents an example of reform that aims to meet the developmental and transitional needs of young people at the same time as remaining youth-oriented. © 2017 John Wiley & Sons Australia, Ltd.

  12. Service Line Management: A New Paradigm in Health Care System

    Directory of Open Access Journals (Sweden)

    Rafat Rezapour Nasrabad

    2016-12-01

    Full Text Available Health care organizations are required to implement modern management practices and approaches due to the importance of improving quality and increasing efficiency of health care services. Service line management of healthcare services is one of the new approaches that managers of health sectors are interested in. The “service line” approach will organize the management of inpatient and outpatient in clinical services focusing on patient diagnostic clusters. Services specific in each patient diagnostic cluster will be offered by a multidisciplinary team including nurses, physicians, and so no. Accordingly, the present study aims to evaluate the features, process and benefits of service line management approach in the provision of health services. In this descriptive study, internal and external scientific database have been reviewed and the necessary data have been extracted from the latest research projects and related scientific documents. The results showed that the new management approach is based on a paradigm shift from traditional health care system management to healthcare service line management with a focus on managers’ competencies. Four specific manager’s competencies in this new management model are: conceptual, collaborative, interpersonal, and leadership competencies. Theses competencies should be developed in health system managers so as to lead to organizational excellency and improvement of health service quality. The health sector managers should strengthen these four key competencies and act on them. Then they will become effective leaders and managers in the health system.

  13. The selling of mental health services: some ethical reflections.

    Science.gov (United States)

    Neumann, M

    1993-01-01

    Since the introduction of public mental health services in Israel, the main principle of our work has been to provide equal and free of charge health services to all patients. We were proud of our ability to provide optimal treatment to all patients in all our facilities, regardless of cost or status of insurance. During the last decade, the cost of providing good quality public health services, including mental health services, has constantly increased, and the system has reached a state of financial distress resulting in insufficiency and inability to perform properly. In order to maintain the level of mental health services, the health authorities started planning a system of payment for various mental health services which, until now, were supplied free of charge. This change of policy and attitude towards the population in need poses severe ethical and practical questions and problems. It is questionable that the amount of income ensuing from the sale of mental health services and whether a relatively small financial profit justify possible injury of the population in need of these services, especially the sicker and weaker members of it. This article raises some ethical doubts involved in charging money for psychiatric services that are given to this special group of the mentally ill, and claims that the feasibility of selling services in this area of public health should be reinvestigated.

  14. Patient Satisfaction With Health Services At The Out-patient ...

    African Journals Online (AJOL)

    Journal Home > Vol 5, No 1 (2013) > ... Introduction: The patient's view as a recipient of health care service is rarely ... This study was aimed at assessing patient satisfaction with healthcare services received at a tertiary hospital in Nigeria.

  15. 1 Integrating reproductive and child health and HIV services in ...

    African Journals Online (AJOL)

    Abstract: In Tanzania, reproductive health and HIV services are coordinated by the .... and skills that are effectively managed and are equitably distributed to ensure that ..... to access and use PMTCT services and in reducing stigma, denial and.

  16. Tri-Service Center for Oral Health Studies (TSCOHS)

    Data.gov (United States)

    Federal Laboratory Consortium — The Tri-Service Center for Oral Health Studies (TSCOHS), a service of the Postgraduate Dental College, is chartered by the Department of Defense TRICARE Management...

  17. Satisfaction with outpatient health services at Jimma Hospital

    African Journals Online (AJOL)

    Objective: To assess consumer satisfaction of outpatient health care services. Methods: A cross-sectional ... tend to influence utilization of services as well as compliance with ... P-value < 0.05 was considered significant. During the study ...

  18. assessment of clients' satisfaction with health service deliveries

    African Journals Online (AJOL)

    Abrham

    showed that the overall client satisfaction level with the health services rendered at ... Therefore, the Hospital management should understand these weak service areas and plan for a better .... for use”, which means the consumer's perception.

  19. Notification: Background Investigation Services EPA’s Efforts to Incorporate Environmental Justice Into Clean Air Act Inspections for Air Toxics

    Science.gov (United States)

    Project #OPE-FY14-0017, March 7, 2014. The OIG plans to begin the preliminary research phase of an evaluation of the EPA's efforts to incorporate environmental justice into Clean Air Act (CAA) inspections for air toxics.

  20. In service inspection of the reactor pressure vessel coolant and moderator nozzles at Atucha 1. 1998/1999 outages

    International Nuclear Information System (INIS)

    Antonaccio, Carlos; Conde, Alberto; Fittipaldi, Andres H.; Maniotti, Jorge; Moliterno, Gabriel E.

    2000-01-01

    During the August 1998 and the August 1999 Atucha 1 outages, two areas were inspected on the Reactor Pressure Vessel: the nozzle inner radii and the nozzle shell welds on all 3 moderator nozzles and all 4 main coolant nozzles. The inspections themselves were carried out by Mitsui Babcock Energy Limited from Scotland. The coordination, maintenance assistant and mounting of the manipulator devices over the nozzles were carried out by NASA personnel. Although it was not the first time the nozzle shell welds were inspected, due to the technologies advances in the ultrasonic field and in the inspection manipulators (magnetic ones), it was possible to inspect more volume than in previous inspections. In the other hand, it was the first time NASA was able to inspect the inner radii. In this last case the mayor problems to inspect them were the nozzles geometry and the small space available to install manipulators. The result of the inspections were: 1) There were no reportable indications at any of the inner radii inspected; 2) The inspection of nozzle to shell welds in main-coolant nozzles R3 and R4 detected flaws (one in each nozzle) which were reported as exceeding the dimensions specified as the acceptance level under Table IWB 3512-1, Section XI of the ASME code. Subsequent analysis requested by NASA and performed by Mitsui Babcock, demonstrated that the flaws were over dimensioned and could be explained as due to 'point' flaws. The analysis was based on theoretical mathematic model and experimental trials. Therefore their dimension were under the acceptance level of the ASME XI code. Although the Mitsui Babcock analysis, and at the same time it was in progress, it was assumed that the flaws were as they were originally presented (exceeding the acceptance level). NASA asked SIEMENS/KWU, the designer of the plant, to perform the fracture assessment according to ASME XI App. A. The assessment shows that the expected crack growth is negligibly small and the safety

  1. Chronic Childhood Trauma, Mental Health, Academic Achievement, and School-Based Health Center Mental Health Services

    Science.gov (United States)

    Larson, Satu; Chapman, Susan; Spetz, Joanne; Brindis, Claire D.

    2017-01-01

    Background: Children and adolescents exposed to chronic trauma have a greater risk for mental health disorders and school failure. Children and adolescents of minority racial/ethnic groups and those living in poverty are at greater risk of exposure to trauma and less likely to have access to mental health services. School-based health centers…

  2. Methodological aspects of a GIS-based environmental health inspection program used in the Athens 2004 Olympic and Para Olympic Games.

    Science.gov (United States)

    Hadjichristodoulou, Christos; Soteriades, Elpidoforos S; Kolonia, Virginia; Falagas, Matthew E; Pantelopoulos, Efstathios; Panagakos, Georgios; Mouchtouri, Varvara; Kremastinou, Jeni

    2005-09-02

    The use of geographical information system (GIS) technologies in public health surveillance is gradually gaining momentum around the world and many applications have already been reported in the literature. In this study, GIS technology was used to help county departments of Public Health to implement environmental health surveillance for the Athens 2004 Olympic and Para Olympic Games. In order to assess the workload in each Olympic county, 19 registry forms and 17 standardized inspection forms were developed to register and inspect environmental health items requiring inspection (Hotels, restaurants, swimming pools, water supply system etc), respectively. Furthermore, related databases were created using Epi Info 2002 and a geographical information system (GIS) were used to implement an integrated Environmental Health inspection program. The project was conducted in Athens by the Olympic Planning Unit (OPU) of the National School of Public Health, in close cooperation with the Ministry of Health and Social Solidarity and the corresponding departments of Public Health in all municipalities that were scheduled to host events during the Athens 2004 Olympic and Para Olympic games. A total of 44,741 premises of environmental health interest were geocoded into GIS databases and several electronic maps were developed. Using such maps in association with specific criteria, we first identified the maximum workload required to execute environmental health inspections in all premises within the eleven Olympic County Departments of Public Health. Six different scenarios were created for each county, based on devised algorithms in order to design the most effective and realistic inspection program using the available inspectors from each municipality. Furthermore, GIS applications were used to organize the daily inspection program for the Olympic games, provide coloured displays of the inspection results and link those results with the public health surveillance of specific

  3. Methodological aspects of a GIS-based environmental health inspection program used in the Athens 2004 Olympic and Para Olympic Games

    Directory of Open Access Journals (Sweden)

    Pantelopoulos Efstathios

    2005-09-01

    Full Text Available Abstract Background The use of geographical information system (GIS technologies in public health surveillance is gradually gaining momentum around the world and many applications have already been reported in the literature. In this study, GIS technology was used to help county departments of Public Health to implement environmental health surveillance for the Athens 2004 Olympic and Para Olympic Games. Methods In order to assess the workload in each Olympic county, 19 registry forms and 17 standardized inspection forms were developed to register and inspect environmental health items requiring inspection (Hotels, restaurants, swimming pools, water supply system etc, respectively. Furthermore, related databases were created using Epi Info 2002 and a geographical information system (GIS were used to implement an integrated Environmental Health inspection program. The project was conducted in Athens by the Olympic Planning Unit (OPU of the National School of Public Health, in close cooperation with the Ministry of Health and Social Solidarity and the corresponding departments of Public Health in all municipalities that were scheduled to host events during the Athens 2004 Olympic and Para Olympic games. Results A total of 44,741 premises of environmental health interest were geocoded into GIS databases and several electronic maps were developed. Using such maps in association with specific criteria, we first identified the maximum workload required to execute environmental health inspections in all premises within the eleven Olympic County Departments of Public Health. Six different scenarios were created for each county, based on devised algorithms in order to design the most effective and realistic inspection program using the available inspectors from each municipality. Furthermore, GIS applications were used to organize the daily inspection program for the Olympic games, provide coloured displays of the inspection results and link those

  4. Developing an Employee Counselling Service within the British National Health Service.

    Science.gov (United States)

    Whelan, Linda; Robson, Maggie; Cook, Peter

    1999-01-01

    Evaluation of an employee counseling service in Britain's National Health Service by 26 staff participants found the service was valued by employees. Designed to meet the objectives of a "healthy workplace" initiative, the service appeared to be addressing staff support needs. (SK)

  5. Embedding health literacy into health systems: a case study of a regional health service.

    Science.gov (United States)

    Vellar, Lucia; Mastroianni, Fiorina; Lambert, Kelly

    2017-12-01

    Objective The aim of the present study was to describe how one regional health service the Illawarra Shoalhaven Local Health District embedded health literacy principles into health systems over a 3-year period. Methods Using a case study approach, this article describes the development of key programs and the manner in which clinical incidents were used to create a health environment that allows consumers the right to equitably access quality health services and to participate in their own health care. Results The key outcomes demonstrating successful embedding of health literacy into health systems in this regional health service include the creation of a governance structure and web-based platform for developing and testing plain English consumer health information, a clearly defined process to engage with consumers, development of the health literacy ambassador training program and integrating health literacy into clinical quality improvement processes via a formal program with consumers to guide processes such as improvements to access and navigation around hospital sites. Conclusions The Illawarra Shoalhaven Local Health District has developed an evidence-based health literacy framework, guided by the core principles of universal precaution and organisational responsibility. Health literacy was also viewed as both an outcome and a process. The approach taken by the Illawarra Shoalhaven Local Health District to address poor health literacy in a coordinated way has been recognised by the Australian Commission on Safety and Quality in Health Care as an exemplar of a coordinated approach to embed health literacy into health systems. What is known about the topic? Poor health literacy is a significant national concern in Australia. The leadership, governance and consumer partnership culture of a health organisation can have considerable effects on an individual's ability to access, understand and apply the health-related information and services available to them

  6. Cultural values and health service quality in China.

    Science.gov (United States)

    Polsa, Pia; Fuxiang, Wei; Sääksjärvi, Maria; Shuyuan, Pei

    2013-01-01

    Several service quality studies show how cultural features may influence the way service quality is perceived. However, few studies specifically describe culture's influence on health service quality. Also, there are few studies that take into account patients' health service quality perceptions. This article seeks to present a first step to fill these gaps by examining patients' cultural values and their health service quality assessments. The study draws on published work and applies its ideas to Chinese healthcare settings. Data consist of hospital service perceptions in the People's Republic of China (PRC), a society that is socially, economically and culturally undergoing major changes. In total, 96 patients were surveyed. Data relationships were tested using partial least square (PLS) analysis. Findings show that Chinese patients' cultural values and their health service assessments are related and that the cultural values themselves seem to be changing. Additionally, further analyses provided interesting results pointing to which cultural values influenced service quality perceptions. The strongest service quality predictor was power distance. The sample is relatively small and collected from only one major hospital in China. Therefore, future research should extend the sample size and scope. Follow-up research could also include cross-cultural investigations of perceived health service quality to substantiate cultural influences on health service quality perceptions. In line with similar research in other contexts, the study confirms that power distance has a significant relationship with service quality perceptions. The study contributes to existing health service literature by offering patients' views on health service quality and by describing relationships between health service perceptions and cultural values--the study's main contribution.

  7. Experiencing health care service quality: through patients' eyes.

    Science.gov (United States)

    Schembri, Sharon

    2015-02-01

    The primary aim of the present study was to consider health care service quality from the patients' perspective, specifically through the patient's eyes. A narrative analysis was performed on 300 patient stories. This rigorous analysis of patient stories is designed to identify and describe health care service quality through patients' eyes in an authentic and accurate, experiential manner. The findings show that there are variant and complex ways that patients experience health care service quality. Patient stories offer an authentic view of the complex ways that patients experience health care service quality. Narrative analysis is a useful tool to identify and describe how patients experience health care service quality. Patients experience health care service quality in complex and varying ways.

  8. Efficiency in health public services provision and market failure

    Directory of Open Access Journals (Sweden)

    Carlos Arturo Meza Carvajalino

    2006-07-01

    Full Text Available This document studies the theoretical foundations, the different controversies regarding the health service and the conceptions adopted from the hypotheses related to the market efficiency in the provision of a public service and the consequent market failures. The author thinks that when the health public service was delegated to the market in Colombia they originated failures in the competition, externalities, preference goods and services, asymmetry and redistribution, among the most relevant ones.

  9. Reimbursement for school nursing health care services: position statement.

    Science.gov (United States)

    Lowe, Janet; Cagginello, Joan; Compton, Linda

    2014-09-01

    Children come to school with a variety of health conditions, varying from moderate health issues to multiple, severe chronic health illnesses that have a profound and direct impact on their ability to learn. The registered professional school nurse (hereinafter referred to as school nurse) provides medically necessary services in the school setting to improve health outcomes and promote academic achievement. The nursing services provided are reimbursable services in other health care settings, such as hospitals, clinics, and home care settings. The National Association of School Nurses (NASN) believes that school nursing services that are reimbursable nursing services in other health care systems should also be reimbursable services in the school setting, while maintaining the same high quality care delivery standards. Traditionally, local and state tax revenues targeted to fund education programs have paid for school nursing health services. School nurses are in a strategic position to advocate for improving clinical processes to better fit with community health care providers and to align reimbursements with proposed changes. Restructuring reimbursement programs will enable health care funding streams to assist in paying for school nursing services delivered to students in the school setting. Developing new innovative health financing opportunities will help to increase access, improve quality, and reduce costs. The goal is to promote a comprehensive and cost-effective health care delivery model that integrates schools, families, providers, and communities.

  10. [Quality of mental health services: a self audit in the South Verona mental health service].

    Science.gov (United States)

    Allevi, Liliana; Salvi, Giovanni; Ruggeri, Mirella

    2006-01-01

    To start a process of Continuous Quality Improvement (CQI) in an Italian Community Mental Health Service by using a quality assurance questionnaire in a self audit exercise. The questionnaire was administered to 14 key workers and clinical managers with different roles and seniority. One senior manager's evaluation was used as a benchmark for all the others. Changes were introduced in the service practice according to what emerged from the evaluation. Meetings were scheduled to monitor those changes and renew the CQI process. There was a wide difference in the key workers' answers. Overall, the senior manager's evaluation was on the 60th percentile of the distribution of the other evaluations. Those areas that required prompt intervention were risk management, personnel development, and CQI. The CQI process was followed up for one year: some interventions were carried out to change the practice of the service. A self audit exercise in Community Mental Health Services was both feasible and useful. The CQI process was easier to start than to carry on over the long term.

  11. Combining service marketing and strategic alliances in health care.

    Science.gov (United States)

    Lazarus, I R

    1993-11-01

    With or without federal health care reform to impact the delivery of health care services in the U.S., hospitals must commit to service marketing and strategic alliances as a fundamental business strategy. Service marketing not only differentiates the provider, but with the proper programs in place, it may actually facilitate the formation of strategic alliances. The combination of these strategies will be particularly effective in preparing for any health care policy change.

  12. 77 FR 54783 - Improving Access to Mental Health Services for Veterans, Service Members, and Military Families

    Science.gov (United States)

    2012-09-05

    ... develops formal arrangements with community-based providers, such as community mental health clinics... effectiveness of community partnerships in helping to meet the mental health needs of veterans in a timely way... networks that supports the use of community mental health services, including telehealth services and...

  13. Public Health Services for Foreign Workers in Malaysia.

    Science.gov (United States)

    Noh, Normah Awang; Wahab, Haris Abd; Bakar Ah, Siti Hajar Abu; Islam, M Rezaul

    2016-01-01

    The objective of this study was to know the status of the foreign workers' access to public health services in Malaysia based on their utilization pattern. The utilization pattern covered a number of areas, such as frequency of using health services, status of using health services, choice and types of health institutions, and cost of health treatment. The study was conducted on six government hospitals in the Klang Valley area in Kuala Lumpur, Malaysia. Data were collected from 600 foreign patients working in the country, using an interview method with a structured questionnaire. The results showed that the foreign workers' access to public health services was very low. The findings would be an important guideline to formulate an effective health service policy for the foreign workers in Malaysia.

  14. Developing a New Zealand casemix classification for mental health services.

    Science.gov (United States)

    Eagar, Kathy; Gaines, Phillipa; Burgess, Philip; Green, Janette; Bower, Alison; Buckingham, Bill; Mellsop, Graham

    2004-10-01

    This study aimed to develop a casemix classification of characteristics of New Zealand mental health services users. Over a six month period, patient information, staff time and service costs were collected from 8 district health boards. This information was analysed seeking the classification of service user characteristics which best predicted the cost drivers of the services provided. A classification emerged which explained more than two thirds of the variance in service user costs. It can be used to inform service management and funding, but it is premature to have it determine funding.

  15. The health production function of oral health services systems

    DEFF Research Database (Denmark)

    Vlad, R.S.; Petersen, P.E.

    2000-01-01

    Attitudes, dental status, socioeconomic factors, oral health care, production of oral health, health status, quality of life......Attitudes, dental status, socioeconomic factors, oral health care, production of oral health, health status, quality of life...

  16. Future of Christian health services – an economic perspective

    Directory of Open Access Journals (Sweden)

    Steffen Flessa

    2016-01-01

    Full Text Available Although Christian Health Services have a proud history of healing and compassion especially in developing countries, their future is affected by secular changes in the financing and provision of health care services. However, the nature of life as it is evolving in modern society promises a need for the capacity to deal with increasing dynamics, complexity and uncertainty. In these circumstances the potential capacity of Christians in their institutions and churches to provide Unconditional Reliability suggests a new opportunity. The components of Unconditional Reliability and how they affect the portfolio of Christian Health Services is explained. Effective Christian Health Services will require appropriate analysis of their portfolios.

  17. Availability of school health services for young children.

    Science.gov (United States)

    Heneghan, A M; Malakoff, M E

    1997-10-01

    A survey to assess availability of school health services was distributed to 221 directors of Schools of the 21st Century, an educational model that provides integrated services to children and families. Of this distribution, 126 (57%) surveys were returned; 88% of respondents reported they provided some type of school health services for their students; 75% of schools had access to school nursing services, yet only 33% had a school nurse on-site; 50% had less than daily access to a school nurse. Despite a high reported prevalence of physical and mental health problems, other services such as acute care, nutrition counseling, dental screenings, or mental health services were provided less frequently. Barriers perceived as problematic for schools providing health services included inadequate funding, limited parental awareness, and opposition by school or community members. Respondents believed transportation, limited financial resources, and inadequate health insurance were barriers to care for children and families. Among this sample of schools, school health services varied in availability and comprehensiveness. Educators, health providers, and parents must work together to provide improved school health services for children.

  18. [Physicians' tasks in the Occupational Health Services].

    Science.gov (United States)

    von Bülow, B A

    1995-03-06

    The aim of this study was to describe the kind of present and future tasks doctors employed in the Occupational Health Service (OHS) in Denmark carried out and to shed light on the reasons why only a moderate number of doctors are employed in the OHS. Additional aims were to map out the number of engaged part-time and full-time doctors in the OHS in Denmark compared with the number of other professionals engaged in the OHS. The study was based on questionnaires sent out to all 109 OHS units in Denmark and to all the doctors employed in the OHS. Ten persons in the OHS were strategically selected for an open interview. There were still only a very few doctors (9%) employed in the OHS in comparison to the other professionals employed in OHS, (nurses, various therapists and technicians) and the doctors were mostly engaged part-time; most of them for less than 10 hours a week. The moderate number of doctors was amongst other things explained by the relatively high cost of the doctors' salaries and the doctors having a reputation for being arrogant and dominating. The doctors were in general very experienced in occupational health matters and solved many problems which required a doctors education. A great deal of the problems they solved were in finding the causality between the workers' symptoms and the working-place conditions. The doctors suggested several future tasks for OHS, e.g. to evaluate its preventive results and to participate in a higher degree when planning working environments.

  19. Strengthening Youth Friendly Health Services through Expanding ...

    African Journals Online (AJOL)

    USER

    safety, LARC uptake among youth is low. We evaluated the effect on contraceptive uptake of training youth-friendly service providers to counsel and provide all .... approach - service delivery limited to LARCs training for the YFS providers and ...

  20. Development of a clockwork light source to enable cervical inspection by village health workers

    Directory of Open Access Journals (Sweden)

    Steventon Richard

    2002-12-01

    Full Text Available Abstract Background Cervical cancer can often be prevented by screening and may be curable if identified and treated in its early stages. However, 80% of new cases occur in less-developed countries where cervical cancer screening programmes are small-scale or non-existent. This is a human tragedy of great proportion, with many of those affected being young mothers. There is some evidence that cancerous or precancerous lesions may be detected by visual inspection with acetic acid (VIA and field studies indicate that this technique is effective, safe and acceptable to women. However, the provision of a light source for inspection of the cervix presents a major problem in less-developed countries, where candles and torches often provide the only means of illumination. Our objective was to develop a light source based on clockwork technology, that required no batteries or external power source. Methods We adapted the design of a commercially available clockwork torch to provide a light source for cervical inspection. The light source was then tested under laboratory conditions in a comparison with other illumination methods typically used in this application. Results The light source gave illuminance levels greater than those produced by any other method tested, and also had considerable advantages in terms of ease of use and safety. Conclusion This design is small, compact, effective and safe to use and promises a better and more affordable means of visualising the cervix. Further field trials of VIA are now required which incorporate this light source.

  1. Chronic Childhood Trauma, Mental Health, Academic Achievement, and School-Based Health Center Mental Health Services

    OpenAIRE

    Larson, S; Chapman, S; Spetz, J; Brindis, CD

    2017-01-01

    Children and adolescents exposed to chronic trauma have a greater risk for mental health disorders and school failure. Children and adolescents of minority racial/ethnic groups and those living in poverty are at greater risk of exposure to trauma and less likely to have access to mental health services. School-based health centers (SBHCs) may be one strategy to decrease health disparities.Empirical studies between 2003 and 2013 of US pediatric populations and of US SBHCs were included if rese...

  2. EDITORIAL Reinvigorating maternal health service delivery in Ethiopia

    African Journals Online (AJOL)

    kim

    awareness, access to services and building the capacity of health facilities. Such measures however ... skilled providers, which is staggering below. 15% (6). This figure may ... health workers and local structures irrespective of their interest?

  3. Resolute large scale mining company contribution to health services of

    African Journals Online (AJOL)

    Resolute large scale mining company contribution to health services of Lusu ... in terms of socio economic, health, education, employment, safe drinking water, ... The data were analyzed using Scientific Package for Social Science (SPSS).

  4. A multidimensional approach to case mix for home health services

    Science.gov (United States)

    Manton, Kenneth G.; Hausner, Tony

    1987-01-01

    Developing a case-mix methodology for home health services is more difficult than developing one for hospitalization and acute health services, because the determinants of need for home health care are more complex and because of the difficulty in defining episodes of care. To evaluate home health service case mix, a multivariate grouping methodology was applied to records from the 1982 National Long-Term Care Survey linked to Medicare records on home health reimbursements. Using this method, six distinct health and functional status dimensions were identified. These dimensions, combined with factors describing informal care resources and local market conditions, were used to explain significant proportions of the variance (r2 = .45) of individual differences in Medicare home health reimbursements and numbers of visits. Though the data were not collected for that purpose, the high level of prediction strongly suggests the feasibility of developing case-mix strategies for home health services. PMID:10312187

  5. Resources available for school based mental health services in ...

    African Journals Online (AJOL)

    Resources available for school based mental health services in Enugu urban and head teachers' knowledge of childhood mental health problems. ... PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) ...

  6. 20 CFR 638.510 - Health care and services.

    Science.gov (United States)

    2010-04-01

    ... UNDER TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Center Operations § 638.510 Health care and services. The center operator shall provide a health program, including basic medical, dental, and mental...

  7. A MODEL FOR HIGHER EDUCATION CAMPUS HEALTH SERVICES

    African Journals Online (AJOL)

    2010-03-17

    Mar 17, 2010 ... generation was used to develop a holistic healthcare model for a higher education campus' health service. It became ... innovative. Health plays a .... conducted will set the tone for the interactive process of holistic healthcare.

  8. 42 CFR 93.220 - Public Health Service or PHS.

    Science.gov (United States)

    2010-10-01

    ... for Toxic Substances and Disease Registry, Centers for Disease Control and Prevention, Food and Drug... Health, and the Substance Abuse and Mental Health Services Administration, and the offices of the...

  9. Improving Acceptance, Integration and Health among LGBT Service Members

    Science.gov (United States)

    2017-10-01

    these stressors on LGBT service members is poorly understood, with very little data available on the unique physical and mental health needs of these...Bullying • Overall health • Healthcare utilization • Lost duty days • Sick call visits • Physical health symptoms • Sexual/gender identity disclosure...Award Numbers: W81XWH-15-1-0699 Title: Improving Acceptance, Integration and Health among LGBT Service Members Principal Investigators: Jeremy

  10. Integration of in-service inspection works in the objectives of nuclear power plants; Integracion de los trabajos de inspeccion en servicio en los objectivos de las centrales nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, M.; Lopez, M.A.

    1996-09-01

    The present articles summarizes the objectives of Spanish NPPs and the in-service inspection aspect in these objectives. The Safety maintenance, lifetime of nuclear power plants, reduction of doses and wastes and the participation of main are evaluated.

  11. Periodical in-service inspection as part of individual program of quality assurance of steam generators and pressurizers of WWER 440 nuclear power plant

    International Nuclear Information System (INIS)

    Kawalec, M.

    1982-01-01

    The manufacturers of equipment for nuclear power plants in the Czechoslovak Socialist Republic are obligated to process so-called individual programs of quality assurance in order to secure the quality of selected equipment in nuclear power. These programmes should include the evaluation of the design of the individual equipments with regard to the implementation of in-service inspection. The main problems are discussed related to the processing of the program of quality assurance for the steam generator and pressurizer. To solve these problems it is necessary that the general project designer should make a classification of the components according to safety categories and that the manufacturers should determine the weak points of the design on the basis of an analysis of the design of individual component nodes. On the basis of such an analysis it is then necessary to evaluate the existing design of the scale of in-service inspections and to decide whether or not new inspection methods should be added. (Z.M.)

  12. A systemic approach to understanding mental health and services.

    Science.gov (United States)

    Cohen, Mark

    2017-10-01

    In the UK mental health and associated NHS services face considerable challenges. This paper aims to form an understanding both of the complexity of context in which services operate and the means by which services have sought to meet these challenges. Systemic principles as have been applied to public service organisations with reference to interpersonal relations, the wider social culture and its manifestation in service provision. The analysis suggests that the wider culture has shaped service demand and the approaches adopted by services resulting in a number of unintended consequences, reinforcing loops, increased workload demands and the limited value of services. The systemic modelling of this situation provides a necessary overview prior to future policy development. The paper concludes that mental health and attendant services requires a systemic understanding and a whole system approach to reform. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  13. Do young people attending addiction services differ from those attending youth mental health services?

    Science.gov (United States)

    Christie, Grant; Merry, Sally; Robinson, Elizabeth

    2010-07-01

    We aimed to describe and compare the self-reported substance use, psychopathology and psychosocial morbidity in adolescents attending two adolescent outpatient services, a triage-based mental health service and an engagement-focused addiction service in Auckland, New Zealand. A naturalistic cross-section of 131 (addiction service = 67, mental health service = 64) 14-18-year-old boys and girls attending each service completed a standardised screening and assessment instrument, the Drug Use Screening Inventory-Revised. The Drug Use Screening Inventory-Revised measures self-reported problems across 10 domains of functioning, including substance use, behaviour, psychiatric symptoms and school and family functioning. Descriptive statistics were used to provide an overview of the self-reported morbidity in each group and t-tests were used to determine differences between the two groups. Adolescents attending the addiction service reported significantly more problems with substance use, school performance and peer relationships than those attending the mental health service. There was no significant difference in reported psychiatric symptoms, behavioural problems, social competency, health problems, family problems, difficulties in work functioning or leisure time between the two groups. Young people presenting to engagement-focused substance use services report similar difficulties to those at mental health services across most areas of psychosocial functioning. Addiction services may require equivalent staffing expertise and workforce development to that in mental health to effectively meet young people's needs.

  14. Adolescents perception of reproductive health care services in Sri Lanka

    Science.gov (United States)

    Agampodi, Suneth B; Agampodi, Thilini C; UKD, Piyaseeli

    2008-01-01

    Background Adolescent health needs, behaviours and expectations are unique and routine health care services are not well geared to provide these services. The purpose of this study was to explore the perceived reproductive health problems, health seeking behaviors, knowledge about available services and barriers to reach services among a group of adolescents in Sri Lanka in order to improve reproductive health service delivery. Methods This qualitative study was conducted in a semi urban setting in Sri Lanka. A convenient sample of 32 adolescents between 17–19 years of age participated in four focus group discussions. Participants were selected from four midwife areas. A pre-tested focus group guide was used for data collection. Male and female facilitators conducted discussions separately with young males and females. All tape-recorded data was fully transcribed and thematic analysis was done. Results Psychological distresses due to various reasons and problems regarding menstrual cycle and masturbation were reported as the commonest health problems. Knowledge on existing services was very poor and boys were totally unaware of youth health services available through the public health system. On reproductive Health Matters, girls mainly sought help from friends whereas boys did not want to discuss their problems with anyone. Lack of availability of services was pointed out as the most important barrier in reaching the adolescent needs. Lack of access to reproductive health knowledge was an important reason for poor self-confidence among adolescents to discuss these matters. Lack of confidentiality, youth friendliness and accessibility of available services were other barriers discussed. Adolescents were happy to accept available services through public clinics and other health infrastructure for their services rather than other organizations. A demand was made for separate youth friendly services through medical practitioners. Conclusions and recommendations

  15. Adolescents perception of reproductive health care services in Sri Lanka

    Directory of Open Access Journals (Sweden)

    Agampodi Thilini C

    2008-05-01

    Full Text Available Abstract Background Adolescent health needs, behaviours and expectations are unique and routine health care services are not well geared to provide these services. The purpose of this study was to explore the perceived reproductive health problems, health seeking behaviors, knowledge about available services and barriers to reach services among a group of adolescents in Sri Lanka in order to improve reproductive health service delivery. Methods This qualitative study was conducted in a semi urban setting in Sri Lanka. A convenient sample of 32 adolescents between 17–19 years of age participated in four focus group discussions. Participants were selected from four midwife areas. A pre-tested focus group guide was used for data collection. Male and female facilitators conducted discussions separately with young males and females. All tape-recorded data was fully transcribed and thematic analysis was done. Results Psychological distresses due to various reasons and problems regarding menstrual cycle and masturbation were reported as the commonest health problems. Knowledge on existing services was very poor and boys were totally unaware of youth health services available through the public health system. On reproductive Health Matters, girls mainly sought help from friends whereas boys did not want to discuss their problems with anyone. Lack of availability of services was pointed out as the most important barrier in reaching the adolescent needs. Lack of access to reproductive health knowledge was an important reason for poor self-confidence among adolescents to discuss these matters. Lack of confidentiality, youth friendliness and accessibility of available services were other barriers discussed. Adolescents were happy to accept available services through public clinics and other health infrastructure for their services rather than other organizations. A demand was made for separate youth friendly services through medical practitioners

  16. The Delivery of Health Promotion and Environmental Health Services; Public Health or Primary Care Settings?

    Directory of Open Access Journals (Sweden)

    Lene Bjørn Jensen

    2018-05-01

    Full Text Available The WHO Regional Office for Europe developed a set of public health functions resulting in the ten Essential Public Health Operations (EPHO. Public health or primary care settings seem to be favorable to embrace all actions included into EPHOs. The presented paper aims to guide readers on how to assign individual health promotion and environmental health services to public health or primary care settings. Survey tools were developed based on EPHO 2, 3 and 4; there were six key informant surveys out of 18 contacted completed via e-mails by informants working in Denmark on health promotion and five face-to-face interviews were conducted in Australia (Melbourne and Victoria state with experts from environmental health, public health and a physician. Based on interviews, we developed a set of indicators to support the assignment process. Population or individual focus, a system approach or one-to-one approach, dealing with hazards or dealing with effects, being proactive or reactive were identified as main element of the decision tool. Assignment of public health services to one of two settings proved to be possible in some cases, whereas in many there is no clear distinction between the two settings. National context might be the one which guides delivery of public health services.

  17. The Delivery of Health Promotion and Environmental Health Services; Public Health or Primary Care Settings?

    Science.gov (United States)

    Bjørn Jensen, Lene; Lukic, Irena; Gulis, Gabriel

    2018-05-07

    The WHO Regional Office for Europe developed a set of public health functions resulting in the ten Essential Public Health Operations (EPHO). Public health or primary care settings seem to be favorable to embrace all actions included into EPHOs. The presented paper aims to guide readers on how to assign individual health promotion and environmental health services to public health or primary care settings. Survey tools were developed based on EPHO 2, 3 and 4; there were six key informant surveys out of 18 contacted completed via e-mails by informants working in Denmark on health promotion and five face-to-face interviews were conducted in Australia (Melbourne and Victoria state) with experts from environmental health, public health and a physician. Based on interviews, we developed a set of indicators to support the assignment process. Population or individual focus, a system approach or one-to-one approach, dealing with hazards or dealing with effects, being proactive or reactive were identified as main element of the decision tool. Assignment of public health services to one of two settings proved to be possible in some cases, whereas in many there is no clear distinction between the two settings. National context might be the one which guides delivery of public health services.

  18. The demand for ambulatory mental health services from specialty providers.

    Science.gov (United States)

    Horgan, C M

    1986-01-01

    A two-part model is used to examine the demand for ambulatory mental health services in the specialty sector. In the first equation, the probability of having a mental health visit is estimated. In the second part of the model, variations in levels of use expressed in terms of visits and expenditures are examined in turn, with each of these equations conditional on positive utilization of mental health services. In the second part of the model, users are additionally grouped into those with and without out-of-pocket payment for services. This specification accounts for special characteristics regarding the utilization of ambulatory mental health services: (1) a large part of the population does not use these services; (2) of those who use services, the distribution of use is highly skewed; and (3) a large number of users have zero out-of-pocket expenditures. Cost-sharing does indeed matter in the demand for ambulatory mental health services from specialty providers; however, the decision to use mental health services is affected by the level of cost-sharing to a lesser degree than is the decision regarding the level of use of services. The results also show that price is only one of several important factors in determining the demand for services. The lack of significance of family income and of being female is notable. Evidence is presented for the existence of bandwagon effects. The importance of Medicaid in the probability of use equations is noted. PMID:3721874

  19. Design considerations, tooling, and equipment for remote in-service inspection of radioactive piping and pressure-vessel systems

    International Nuclear Information System (INIS)

    Swannack, D.L.; Schmoker, D.S.

    1983-01-01

    This paper summarizes results obtained in use of remotely-operated nondestructive testing (NDT) equipment for inspection of reactor-system components. Experience obtained in operating the Fast Flux Test Facility (FFTF) has provided a basis for field verification of remote NDT equipment designs and has suggested development improvements. Remote Viewing and data gathering systems used include periscopes, borescopes, fiberscopes, hybrid borescopes/fiberscopes, and closed circuit television. A summary of design consideration for inspection equipment and power plant design is presented to achieve improved equipment operation and reduction of plant maintenance downtime

  20. 9 CFR 93.218 - Import permits and applications for inspection for poultry.

    Science.gov (United States)

    2010-01-01

    ... inspection for poultry. 93.218 Section 93.218 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS IMPORTATION OF CERTAIN ANIMALS, BIRDS, FISH, AND POULTRY, AND CERTAIN ANIMAL, BIRD, AND POULTRY...

  1. An Evaluation of an Occupational Health Advice Service

    Science.gov (United States)

    Shearn, P.; Ford, Norma J.; Murphy, R. G.

    2010-01-01

    Objective: The objective of this article is to identify the profile of service users of an occupational health (OH) support service and establish areas of need, and to gather client feedback on the experience of participating in the support service and perceived outcomes and the impact of the advice received. Design and Setting: We carried out…

  2. Quality of Family Planning Services in Primary Health Centers of ...

    African Journals Online (AJOL)

    Background: Good quality of care in family planning (FP) services help individuals and couples to meet their reproductive health needs safely and effectively. Therefore, assessment and improvement of the quality of family planning services could enhance family planning services utilization. This study was thus conducted ...

  3. Mental health service use among South Africans for mood, anxiety ...

    African Journals Online (AJOL)

    Background. Europe and North America have low rates of mental health service use despite high rates of mental disorder. Little is known about mental health service use among South Africans. Design. A nationally representative survey of 4 351 adults. Twelve-month DSM-IV (Diagnostic and Statistical Manual, 4th edition) ...

  4. Innovations in health service delivery: the corporatization of public hospitals

    National Research Council Canada - National Science Library

    Harding, April; Preker, Alexander S

    2003-01-01

    ... hospitals play a critical role in ensuring delivery of health services, less is known about how to improve the efficiency and quality of care provided. Much can be learned in this respect from the experiences of hospital reforms initiated during the 1990s. Innovations in Health Service Delivery: The Corporatization of Public Hospitals is an a...

  5. Maternal health service utilization in urban slums of selected towns ...

    African Journals Online (AJOL)

    Maternal health service utilization in urban slums of selected towns in Ethiopia: Qualitative study. ... Reasons were found to be attributed to individual characteristics, perceived capacities of health facilities and friendliness of service providers and socio-cultural factors including socially sanctioned expectations at community ...

  6. Factors associated with adolescent mental health service need and utilization

    NARCIS (Netherlands)

    Zwaanswijk, Marieke; Ende, J. van der; Verhaak, P.F.M.; Bensing, J.; Verhulst, F.C.

    2003-01-01

    Objective: To determine the association of parent, family, and adolescent variables with adolescent mental health service need and utilization. Method: Correlates of adolescent mental health service utilization, self-perceived need and unmet need were investigated in a general population sample of

  7. original article health services utilization and associated factors

    African Journals Online (AJOL)

    Abrham

    utilization of health services and associated factors in Jimma zone, south west Ethiopia. METHODS: A cross .... The sample size was calculated using Epi-Info 3.3.2 ... Before the start of data collection, the proposal was submitted to the ... Table 1. Health services access in Jimma zone, Southwest Ethiopia, February 2007.

  8. The Technological Growth in eHealth Services

    Directory of Open Access Journals (Sweden)

    Shilpa Srivastava

    2015-01-01

    Full Text Available The infusion of information communication technology (ICT into health services is emerging as an active area of research. It has several advantages but perhaps the most important one is providing medical benefits to one and all irrespective of geographic boundaries in a cost effective manner, providing global expertise and holistic services, in a time bound manner. This paper provides a systematic review of technological growth in eHealth services. The present study reviews and analyzes the role of four important technologies, namely, satellite, internet, mobile, and cloud for providing health services.

  9. The Technological Growth in eHealth Services.

    Science.gov (United States)

    Srivastava, Shilpa; Pant, Millie; Abraham, Ajith; Agrawal, Namrata

    2015-01-01

    The infusion of information communication technology (ICT) into health services is emerging as an active area of research. It has several advantages but perhaps the most important one is providing medical benefits to one and all irrespective of geographic boundaries in a cost effective manner, providing global expertise and holistic services, in a time bound manner. This paper provides a systematic review of technological growth in eHealth services. The present study reviews and analyzes the role of four important technologies, namely, satellite, internet, mobile, and cloud for providing health services.

  10. The Technological Growth in eHealth Services

    Science.gov (United States)

    Srivastava, Shilpa; Pant, Millie; Abraham, Ajith; Agrawal, Namrata

    2015-01-01

    The infusion of information communication technology (ICT) into health services is emerging as an active area of research. It has several advantages but perhaps the most important one is providing medical benefits to one and all irrespective of geographic boundaries in a cost effective manner, providing global expertise and holistic services, in a time bound manner. This paper provides a systematic review of technological growth in eHealth services. The present study reviews and analyzes the role of four important technologies, namely, satellite, internet, mobile, and cloud for providing health services. PMID:26146515

  11. Employee health services integration: meeting the challenge. Successful program.

    Science.gov (United States)

    Lang, Y C

    1998-02-01

    1. The first step of a successful Employee Health Service integration is to have a plan supported by management. The plan must be presented to the employees prior to implementation in a "user friendly" manner. 2. Prior to computerization of employee health records, a record order system must be developed to prevent duplication and to enhance organization. 3. Consistency of services offered must be maintained. Each employee must have the opportunity to receive the same service. Complexity of services will determine the site of delivery. 4. Integration is a new and challenging development for the health care field. Flexibility and brainstorming are necessary in an attempt to meet both employee and employer needs.

  12. Family inclusion in mental health services: Reality or rhetoric?

    Science.gov (United States)

    Martin, Robyn M; Ridley, Sophie C; Gillieatt, Sue J

    2017-09-01

    Contemporary mental health policies require family inclusion in the design, implementation and evaluation of services. This scoping review considers the factors in mental health practice which either mediate or promote family inclusion. A wide range of factors are reported to obstruct family inclusion, while a smaller number of studies report that meaningful family inclusion rests on a partnership approach which values the input of families and services users. When it comes to family inclusion, there is a gap between policy and service delivery practice. Changes in service delivery attitudes, values and culture are necessary to meaningfully and systematically include families and service users.

  13. ASSESSMENT OF LOGISTICS MANAGEMENT IN GHANA HEALTH SERVICE

    Directory of Open Access Journals (Sweden)

    john frimpong manso

    2013-08-01

    Full Text Available Ghana Public Health Sector runs a three-tier system of managing health commodities. Suppliers, the Central Medical Store, The Regional Medical Store, Service Delivery Points and the transportation system form the supply chain.  Ghana Health Service logistics system is centralized and the health care delivery system is decentralized. Logistics management in the health system is crucial. This is because there are instances where medicines and health commodities are not available at the Central Medical Stores and the Regional Medical Stores. Consequently, there is no commodity security at the service delivery points. Upon this backdrop the study seeks to assess the logistics management system in order to bring efficiency in the system. The study adopts a multi-case study approach to assess the practices of logistics management, the causes of inadequacy of logistics and the strengths and weaknesses in Ghana Health Service logistics system.  Two categories of participants that is, the key players of health logistics management and end-users were involved in the study.  Four variables; finance for procurement of health commodities, evenly distribution of health commodities, effective supervision and constant monitoring and evaluation were found crucial in effective and efficient logistics management. Moreover, it was found that poor procurement planning and budgeting, lack of financial resources for procurement, poor quantification and forecasting, delay in procurement process and order processing, and delay in receiving insurance claims are some of the causes of inadequacy of logistics in the health systems. It is recommended that Ghana Health Service logistics or supply system must receive constant monitoring and evaluation. Further, Ghana Health Service must ensure that there is effective top-down supervision in the system to bring up efficiency. Again, Ghana Health Service and Ministry of Health must ensure enough funds are secured from the

  14. Factors shaping intersectoral action in primary health care services.

    Science.gov (United States)

    Anaf, Julia; Baum, Fran; Freeman, Toby; Labonte, Ron; Javanparast, Sara; Jolley, Gwyn; Lawless, Angela; Bentley, Michael

    2014-12-01

    To examine case studies of good practice in intersectoral action for health as one part of evaluating comprehensive primary health care in six sites in South Australia and the Northern Territory. Interviews with primary health care workers, collaborating agency staff and service users (Total N=33); augmented by relevant documents from the services and collaborating partners. The value of intersectoral action for health and the importance of partner relationships to primary health care services were both strongly endorsed. Factors facilitating intersectoral action included sufficient human and financial resources, diverse backgrounds and skills and the personal rewards that sustain commitment. Key constraining factors were financial and time limitations, and a political and policy context which has become less supportive of intersectoral action; including changes to primary health care. While intersectoral action is an effective way for primary health care services to address social determinants of health, commitment to social justice and to adopting a social view of health are constrained by a broader health service now largely reinforcing a biomedical model. Effective organisational practices and policies are needed to address social determinants of health in primary health care and to provide a supportive context for workers engaging in intersectoral action. © 2014 Public Health Association of Australia.

  15. Health Services Utilization Patterns Associated with Emergency Department Closure

    DEFF Research Database (Denmark)

    Hansen, Kristian Schultz; Enemark, Ulrika; Foldspang, Anders

    2011-01-01

    , 1997-2003. Data were extracted from administrative registries including information on individual use of emergency services and other hospital care, contact with GPs and socioeconomic background. Health services' use by the Morsø population was measured before reduction in emergency room opening hours...... of substitute health services. By contrast, Morsø women compared to the rest of Viborg county reduced their use of GP services in terms of face-to-face visits (β = -0.08, P = 0.020), telephone consultations (β = -0.11, P = 0.007), home visits (β = -0.48, P = 0.009), and their inpatient hospital utilization (β...... = -0.12, P = 0.022) during the period when emergeny services were only available in the daytime. CONCLUSIONS: Emergency services at neighbouring hospitals (40 kilometres distance) were able to compensate, in part, for the decreased local emergency service provision. Concurrent changes in health care...

  16. CMMI for Services (SVC): The Strategic Landscape for Service

    Science.gov (United States)

    2012-01-01

    Genealogy Gutter maintenance Healthcare Home health care Home inspection Infrastructure management Internal process group Internet retail Internet...TSP national initiative COLOMBIA 64% Service Economy CHINA Government incentives MALAYSIA CMMI and TSP JAPAN TSP Strategic Partner SEI

  17. [Health and social services used by the rural elderly].

    Science.gov (United States)

    Rubio, Encarnación; Comín, Magdalena; Montón, Gema; Martínez, Tomás; Magallón, Rosa

    2014-01-01

    To describe the use of health and social services, and to analyze the influence of functional capacity for Instrumental Activities of Daily Living (IADL) and other factors in their use. Cross-sectional study in a non-institutionalized population older than 64 years old in a basic rural health area of Zaragoza. use of different health and social services. Main independent variable: functional capacity for IADL according to the Lawton-Brody. Confounding variables: sociodemographic, physical exercise, comorbidity, self-perceived health, walking aids, social resources and economic resources (OARS-MAFQ). The relationship between the use of services and functional capacity for IADL was assessed using crude OR (ORC) and adjusted (adjusted OR) with CI95% by means of multivariate logistic regression models. The use of social and health services increased with age and worse functional capacity for IADL. The increased use of health services was related with bad stage of health, limited social and economic resources, physical inactivity and female. The increased use of home help services was related with limited social resources, low education level and male. Regular physical activity and using walking aids were associated with greater participation in recreational activities. The probability of using social and health services increased in older people with impaired functional capacity for IADL. The specific use of them changed according to differences in health, demographic and contextual features. Copyright © 2013 SEGG. Published by Elsevier Espana. All rights reserved.

  18. Trade in health services in the ASEAN region.

    Science.gov (United States)

    Arunanondchai, Jutamas; Fink, Carsten

    2006-12-01

    Promoting quality health services to large population segments is a key ingredient to human and economic development. At its core, healthcare policymaking involves complex trade-offs between promoting equitable and affordable access to a basic set of health services, creating incentives for efficiencies in the healthcare system and managing constraints in government budgets. International trade in health services influences these trade-offs. It presents opportunities for cost savings and access to better quality care, but it also raises challenges in promoting equitable and affordable access. This paper offers a discussion of trade policy in health services for the ASEAN region. It reviews the existing patterns of trade and identifies policy measures that could further harness the benefits from trade in health services and address potential pitfalls that deeper integration may bring about.

  19. Inspection planning

    International Nuclear Information System (INIS)

    Korosec, D.; Levstek, M.F.

    2001-01-01

    Slovenian Nuclear Safety Administration (SNSA) division of nuclear and radiological safety inspection has developed systematic approach to their inspections. To be efficient in their efforts regarding regular and other types of inspections, in past years, the inspection plan has been developed. It is yearly based and organized on a such systematic way, that all areas of nuclear safety important activities of the licensee are covered. The inspection plan assures appropriate preparation for conducting the inspections, allows the overview of the progress regarding the areas to be covered during the year. Depending on the licensee activities and nature of facility (nuclear power plant, research reactor, radioactive waste storage, others), the plan has different levels of intensity of inspections and also their frequency. One of the basic approaches of the plan is to cover all nuclear and radiological important activities on such way, that all regulatory requests are fulfilled. In addition, the inspection plan is a good tool to improve inspection effectiveness based on previous experience and allows to have the oversight of the current status of fulfillment of planned inspections. Future improvement of the plan is necessary in the light of newest achievements on this field in the nuclear world, that means, new types of inspections are planned and will be incorporated into plan in next year.(author)

  20. Socio Demographic Determinants of Maternal Health Service ...

    African Journals Online (AJOL)

    Result: The results showed that 38.5 percent (154) of the women received antenatal care, 32.3 percent (129) of the women received delivery services while 48.3 percent (193) received postnatal care services. In the logistic regression model, reduced income level was associated with decreased use of antenatal care ...