Migration, environmental hazards, and health outcomes in China.

Science.gov (United States)

Chen, Juan; Chen, Shuo; Landry, Pierre F

2013-03-01

China's rapid economic growth has had a serious impact on the environment. Environmental hazards are major sources of health risk factors. The migration of over 200 million people to heavily polluted urban areas is likely to be significantly detrimental to health. Based on data from the 2009 national household survey "Chinese Attitudes toward Inequality and Distributive Injustice" (N = 2866) and various county-level and municipal indicators, we investigate the disparities in subjective exposure to environmental hazards and associated health outcomes in China. This study focuses particularly on migration-residency status and county-level socio-economic development. We employ multiple regressions that account for the complex multi-stage survey design to assess the associations between perceived environmental hazards and individual and county-level indicators and between perceived environmental hazards and health outcomes, controlling for physical and social environments at multiple levels. We find that perceived environmental hazards are associated with county-level industrialization and economic development: respondents living in more industrialized counties report greater exposure to environmental hazards. Rural-to-urban migrants are exposed to more water pollution and a higher measure of overall environmental hazard. Perceived environmental risk factors severely affect the physical and mental health of the respondents. The negative effects of perceived overall environmental hazard on physical health are more detrimental for rural-to-urban migrants than for urban residents. The research findings call for restructuring the household registration system in order to equalize access to public services and mitigate adverse environmental health effects, particularly among the migrant population. Copyright © 2012 Elsevier Ltd. All rights reserved.

Job Hazard Analysis

National Research Council Canada - National Science Library

1998-01-01

.... Establishing proper job procedures is one of the benefits of conducting a job hazard analysis carefully studying and recording each step of a job, identifying existing or potential job hazards...

Exploratory Studies Facility Subsurface Fire Hazards Analysis

International Nuclear Information System (INIS)

Kubicek, J. L.

2001-01-01

The primary objective of this Fire Hazard Analysis (FHA) is to confirm the requirements for a comprehensive fire and related hazards protection program for the Exploratory Studies Facility (ESF) are sufficient to minimize the potential for: (1) The occurrence of a fire or related event. (2) A fire that causes an unacceptable on-site or off-site release of hazardous or radiological material that will threaten the health and safety of employees, the public or the environment. (3) Vital US. Department of Energy (DOE) programs suffering unacceptable interruptions as a result of fire and related hazards. (4) Property losses from a fire and related events exceeding limits established by DOE. (5) Critical process controls and safety class systems being damaged as a result of a fire and related events

INTERNAL HAZARDS ANALYSIS FOR LICENSE APPLICATION

Energy Technology Data Exchange (ETDEWEB)

R.J. Garrett

2005-02-17

The purpose of this internal hazards analysis is to identify and document the internal hazards and potential initiating events associated with preclosure operations of the repository at Yucca Mountain. Internal hazards are those hazards presented by the operation of the facility and by its associated processes that can potentially lead to a radioactive release or cause a radiological hazard. In contrast to external hazards, internal hazards do not involve natural phenomena and external man-made hazards. This internal hazards analysis was performed in support of the preclosure safety analysis and the License Application for the Yucca Mountain Project. The methodology for this analysis provides a systematic means to identify internal hazards and potential initiating events that may result in a radiological hazard or radiological release during the repository preclosure period. These hazards are documented in tables of potential internal hazards and potential initiating events (Section 6.6) for input to the repository event sequence categorization process. The results of this analysis will undergo further screening and analysis based on the criteria that apply to the performance of event sequence analyses for the repository preclosure period. The evolving design of the repository will be re-evaluated periodically to ensure that internal hazards that have not been previously evaluated are identified.

INTERNAL HAZARDS ANALYSIS FOR LICENSE APPLICATION

International Nuclear Information System (INIS)

Garrett, R.J.

2005-01-01

The purpose of this internal hazards analysis is to identify and document the internal hazards and potential initiating events associated with preclosure operations of the repository at Yucca Mountain. Internal hazards are those hazards presented by the operation of the facility and by its associated processes that can potentially lead to a radioactive release or cause a radiological hazard. In contrast to external hazards, internal hazards do not involve natural phenomena and external man-made hazards. This internal hazards analysis was performed in support of the preclosure safety analysis and the License Application for the Yucca Mountain Project. The methodology for this analysis provides a systematic means to identify internal hazards and potential initiating events that may result in a radiological hazard or radiological release during the repository preclosure period. These hazards are documented in tables of potential internal hazards and potential initiating events (Section 6.6) for input to the repository event sequence categorization process. The results of this analysis will undergo further screening and analysis based on the criteria that apply to the performance of event sequence analyses for the repository preclosure period. The evolving design of the repository will be re-evaluated periodically to ensure that internal hazards that have not been previously evaluated are identified

Occupational Health Hazards in ICU Nursing Staff

Directory of Open Access Journals (Sweden)

Helena Eri Shimizu

2010-01-01

Full Text Available This study analyzed occupational health hazards for Intensive Care Unit (ICU nurses and nursing technicians, comparing differences in the number and types of hazards which occur at the beginning and end of their careers. A descriptive cross-sectional study was carried out with 26 nurses and 96 nursing technicians from a public hospital in the Federal District, Brazil. A Likert-type work-related symptom scale (WRSS was used to evaluate the presence of physical, psychological, and social risks. Data were analyzed with the use of the SPSS, version 12.0, and the Kruskal-Wallis test for statistical significance and differences in occupational health hazards at the beginning and at the end of the workers' careers. As a workplace, ICUs can cause work health hazards, mostly physical, to nurses and nursing technicians due to the frequent use of physical energy and strength to provide care, while psychological and social hazards occur to a lesser degree.

Occupational health hazards in street sweepers of Chandrapur city, central India

Directory of Open Access Journals (Sweden)

V. Patil Priyanka

2017-05-01

Full Text Available Street sweepers play an important role in maintaining health and hygiene in cities. They are exposed to road dust and other contaminants while cleaning streets. Exposure of this dust and contaminants irritates respiratory symptoms and airway obstruction. Twenty workers were selected as sample size (10 male and 10 female and 10 individual as control (5 male and 5 female for analysis of occupational health hazards in street sweepers of Chandrapur city. The study was carried out from November 2015 to January 2016. Peak Expiratory Flow Rate analysis which was carried out through Breath-o meter and other occupational health hazards through interview schedule specially designed and developed for this study. The results of the study showed that, Peak Expiratory Flow Rate values were lower in exposed workers (sample population as compared with control group. These workers were exposed to number of environmental and occupational hazards leading to musculoskeletal disorders (100%, respiratory problems (95%, dermatological problems (90%, headache (75% and gastrointestinal problems (15% during work. It was further observed that theses workers were suffering from allergies (100%, cough and cold (75%, asthma and bronchitis lungs (65%, hearing disorder (50%, malaria and typhoid (25%, fever (15% and vomiting (10% after completion of work. To reduce occupational health hazards in sweepers, they must be made alert and aware of potential health risk arising from their work. Reduction in exposure and use of personal protective equipments should be encouraged.INTERNATIONAL JOURNAL OF ENVIRONMENTVolume-6, Issue-2, Mar-May 2017, Page: 9-18

Hazard Identification and Risk Assessment of Health and Safety Approach JSA (Job Safety Analysis) in Plantation Company

Science.gov (United States)

Sugarindra, Muchamad; Ragil Suryoputro, Muhammad; Tiya Novitasari, Adi

2017-06-01

Plantation company needed to identify hazard and perform risk assessment as an Identification of Hazard and Risk Assessment Crime and Safety which was approached by using JSA (Job Safety Analysis). The identification was aimed to identify the potential hazards that might be the risk of workplace accidents so that preventive action could be taken to minimize the accidents. The data was collected by direct observation to the workers concerned and the results were recorded on a Job Safety Analysis form. The data were as forklift operator, macerator worker, worker’s creeper, shredder worker, workers’ workshop, mechanical line worker, trolley cleaning workers and workers’ crepe decline. The result showed that shredder worker value was 30 and had the working level with extreme risk with the risk value range was above 20. So to minimize the accidents could provide Personal Protective Equipment (PPE) which were appropriate, information about health and safety, the company should have watched the activities of workers, and rewards for the workers who obey the rules that applied in the plantation.

21 CFR 123.6 - Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan.

Science.gov (United States)

2010-04-01

... Control Point (HACCP) plan. 123.6 Section 123.6 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... Provisions § 123.6 Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan. (a) Hazard... fish or fishery product being processed in the absence of those controls. (b) The HACCP plan. Every...

K Basin Hazard Analysis

Energy Technology Data Exchange (ETDEWEB)

PECH, S.H.

2000-08-23

This report describes the methodology used in conducting the K Basins Hazard Analysis, which provides the foundation for the K Basins Final Safety Analysis Report. This hazard analysis was performed in accordance with guidance provided by DOE-STD-3009-94, Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports and implements the requirements of DOE Order 5480.23, Nuclear Safety Analysis Report.

K Basin Hazard Analysis

International Nuclear Information System (INIS)

PECH, S.H.

2000-01-01

This report describes the methodology used in conducting the K Basins Hazard Analysis, which provides the foundation for the K Basins Final Safety Analysis Report. This hazard analysis was performed in accordance with guidance provided by DOE-STD-3009-94, Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports and implements the requirements of DOE Order 5480.23, Nuclear Safety Analysis Report

14 CFR 437.29 - Hazard analysis.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Hazard analysis. 437.29 Section 437.29... Documentation § 437.29 Hazard analysis. (a) An applicant must perform a hazard analysis that complies with § 437.55(a). (b) An applicant must provide to the FAA all the results of each step of the hazard analysis...

Occupational Health Hazards among Healthcare Workers in Kampala, Uganda

Directory of Open Access Journals (Sweden)

Rawlance Ndejjo

2015-01-01

Full Text Available Objective. To assess the occupational health hazards faced by healthcare workers and the mitigation measures. Methods. We conducted a cross-sectional study utilizing quantitative data collection methods among 200 respondents who worked in 8 major health facilities in Kampala. Results. Overall, 50.0% of respondents reported experiencing an occupational health hazard. Among these, 39.5% experienced biological hazards while 31.5% experienced nonbiological hazards. Predictors for experiencing hazards included not wearing the necessary personal protective equipment (PPE, working overtime, job related pressures, and working in multiple health facilities. Control measures to mitigate hazards were availing separate areas and containers to store medical waste and provision of safety tools and equipment. Conclusion. Healthcare workers in this setting experience several hazards in their workplaces. Associated factors include not wearing all necessary protective equipment, working overtime, experiencing work related pressures, and working in multiple facilities. Interventions should be instituted to mitigate the hazards. Specifically PPE supply gaps, job related pressures, and complacence in adhering to mitigation measures should be addressed.

Canister storage building hazard analysis report

International Nuclear Information System (INIS)

POWERS, T.B.

1999-01-01

This report describes the methodology used in conducting the Canister Storage Building (CSB) hazard analysis to support the CSB final safety analysis report (FSAR) and documents the results. The hazard analysis was performed in accordance with the DOE-STD-3009-94, ''Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports'', and meets the intent of HNF-PRO-704, ''Hazard and Accident Analysis Process''. This hazard analysis implements the requirements of DOE Order 5480.23, ''Nuclear Safety Analysis Reports''

Health and safety information program for hazardous materials

International Nuclear Information System (INIS)

O'Brien, M.P.; Fallon, N.J.; Kuehner, A.V.

1979-01-01

The system is used as a management tool in several safety and health programs. It is used to: trace the use of hazardous materials and to determine monitoring needs; inform the occupational physician of the potential health problems associated with materials ordered by a given individual; inform the fire and rescue group of hazardous materials in a given building; provide waste disposal recommendations to the hazardous waste management group; assist the hazardous materials shipping coordinator in identifying materials which are regulated by the Department of Transportation; and guide management decisions in the area of recognizing and rectifying unsafe conditions. The information system has been expanded from a manual effort to provide a brief description of health hazards of chemicals used at the lab to a computerized health and safety information system which serves the needs of all personnel who may encounter the material in the course of their work. The system has been designed to provide information needed to control the potential problems associated with a hazardous material up to the time that it is consumed in a given operation or is sent to the waste disposal facility

K Basins Hazard Analysis

International Nuclear Information System (INIS)

WEBB, R.H.

1999-01-01

This report describes the methodology used in conducting the K Basins Hazard Analysis, which provides the foundation for the K Basins Safety Analysis Report (HNF-SD-WM-SAR-062/Rev.4). This hazard analysis was performed in accordance with guidance provided by DOE-STD-3009-94, Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports and implements the requirements of DOE Order 5480.23, Nuclear Safety Analysis Report

Hydrothermal Liquefaction Treatment Hazard Analysis Report

Energy Technology Data Exchange (ETDEWEB)

Lowry, Peter P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wagner, Katie A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-09-12

Hazard analyses were performed to evaluate the modular hydrothermal liquefaction treatment system. The hazard assessment process was performed in 2 stages. An initial assessment utilizing Hazard Identification and Preliminary Hazards Analysis (PHA) techniques identified areas with significant or unique hazards (process safety-related hazards) that fall outside of the normal operating envelope of PNNL and warranted additional analysis. The subsequent assessment was based on a qualitative What-If analysis. The analysis was augmented, as necessary, by additional quantitative analysis for scenarios involving a release of hazardous material or energy with the potential for affecting the public. The following selected hazardous scenarios received increased attention: •Scenarios involving a release of hazardous material or energy, controls were identified in the What-If analysis table that prevent the occurrence or mitigate the effects of the release. •Scenarios with significant consequences that could impact personnel outside the immediate operations area, quantitative analyses were performed to determine the potential magnitude of the scenario. The set of “critical controls” were identified for these scenarios (see Section 4) which prevent the occurrence or mitigate the effects of the release of events with significant consequences.

Assessment of occupational hazards, health problems and safety ...

African Journals Online (AJOL)

Background: Petrol station attendants encounter several hazards and health problems while working. This study was conducted to determine the ... Hazards reported included inhalation of petrol fumes 145 (67.4%), confrontation from customers 112 (52.1%) and noise 98 (45.6%). Health problems reported included ...

Hydrothermal Liquefaction Treatment Preliminary Hazard Analysis Report

Energy Technology Data Exchange (ETDEWEB)

Lowry, Peter P.; Wagner, Katie A.

2015-08-31

A preliminary hazard assessment was completed during February 2015 to evaluate the conceptual design of the modular hydrothermal liquefaction treatment system. The hazard assessment was performed in 2 stages. An initial assessment utilizing Hazard Identification and Preliminary Hazards Analysis (PHA) techniques identified areas with significant or unique hazards (process safety-related hazards) that fall outside of the normal operating envelope of PNNL and warranted additional analysis. The subsequent assessment was based on a qualitative What-If analysis. This analysis was augmented, as necessary, by additional quantitative analysis for scenarios involving a release of hazardous material or energy with the potential for affecting the public.

Health Issues: Do Cell Phones Pose a Health Hazard?

Science.gov (United States)

... Procedures Home, Business, and Entertainment Products Cell Phones Health Issues Share Tweet Linkedin Pin it More sharing ... it Email Print Do cell phones pose a health hazard? Many people are concerned that cell phone ...

14 CFR 437.55 - Hazard analysis.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Hazard analysis. 437.55 Section 437.55... TRANSPORTATION LICENSING EXPERIMENTAL PERMITS Safety Requirements § 437.55 Hazard analysis. (a) A permittee must... safety of property resulting from each permitted flight. This hazard analysis must— (1) Identify and...

MGR External Events Hazards Analysis

International Nuclear Information System (INIS)

Booth, L.

1999-01-01

The purpose and objective of this analysis is to apply an external events Hazards Analysis (HA) to the License Application Design Selection Enhanced Design Alternative 11 [(LADS EDA II design (Reference 8.32))]. The output of the HA is called a Hazards List (HL). This analysis supersedes the external hazards portion of Rev. 00 of the PHA (Reference 8.1). The PHA for internal events will also be updated to the LADS EDA II design but under a separate analysis. Like the PHA methodology, the HA methodology provides a systematic method to identify potential hazards during the 100-year Monitored Geologic Repository (MGR) operating period updated to reflect the EDA II design. The resulting events on the HL are candidates that may have potential radiological consequences as determined during Design Basis Events (DBEs) analyses. Therefore, the HL that results from this analysis will undergo further screening and analysis based on the criteria that apply during the performance of DBE analyses

Preliminary hazards analysis -- vitrification process

International Nuclear Information System (INIS)

Coordes, D.; Ruggieri, M.; Russell, J.; TenBrook, W.; Yimbo, P.

1994-06-01

This paper presents a Preliminary Hazards Analysis (PHA) for mixed waste vitrification by joule heating. The purpose of performing a PHA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PHA is then followed by a Preliminary Safety Analysis Report (PSAR) performed during Title 1 and 2 design. The PSAR then leads to performance of the Final Safety Analysis Report performed during the facility's construction and testing. It should be completed before routine operation of the facility commences. This PHA addresses the first four chapters of the safety analysis process, in accordance with the requirements of DOE Safety Guidelines in SG 830.110. The hazards associated with vitrification processes are evaluated using standard safety analysis methods which include: identification of credible potential hazardous energy sources; identification of preventative features of the facility or system; identification of mitigative features; and analyses of credible hazards. Maximal facility inventories of radioactive and hazardous materials are postulated to evaluate worst case accident consequences. These inventories were based on DOE-STD-1027-92 guidance and the surrogate waste streams defined by Mayberry, et al. Radiological assessments indicate that a facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous materials assessment indicates that a Mixed Waste Vitrification facility will be a Low Hazard facility having minimal impacts to offsite personnel and the environment

Preliminary hazards analysis -- vitrification process

Energy Technology Data Exchange (ETDEWEB)

Coordes, D.; Ruggieri, M.; Russell, J.; TenBrook, W.; Yimbo, P. [Science Applications International Corp., Pleasanton, CA (United States)

1994-06-01

This paper presents a Preliminary Hazards Analysis (PHA) for mixed waste vitrification by joule heating. The purpose of performing a PHA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PHA is then followed by a Preliminary Safety Analysis Report (PSAR) performed during Title 1 and 2 design. The PSAR then leads to performance of the Final Safety Analysis Report performed during the facility`s construction and testing. It should be completed before routine operation of the facility commences. This PHA addresses the first four chapters of the safety analysis process, in accordance with the requirements of DOE Safety Guidelines in SG 830.110. The hazards associated with vitrification processes are evaluated using standard safety analysis methods which include: identification of credible potential hazardous energy sources; identification of preventative features of the facility or system; identification of mitigative features; and analyses of credible hazards. Maximal facility inventories of radioactive and hazardous materials are postulated to evaluate worst case accident consequences. These inventories were based on DOE-STD-1027-92 guidance and the surrogate waste streams defined by Mayberry, et al. Radiological assessments indicate that a facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous materials assessment indicates that a Mixed Waste Vitrification facility will be a Low Hazard facility having minimal impacts to offsite personnel and the environment.

OCCUPATIONAL HEALTH HAZARDS AMONG QUARRY ...

African Journals Online (AJOL)

Key Words: Occupational health hazards, Industrial pollution, Quarry industry, ... fireworks and signaling apparatus and for setting blind rivets and forming ... in the air, physiological risks and psychological trauma (Ajayi & Osibanjo, 1995).

Causal Mediation Analysis for the Cox Proportional Hazards Model with a Smooth Baseline Hazard Estimator.

Science.gov (United States)

Wang, Wei; Albert, Jeffrey M

2017-08-01

An important problem within the social, behavioral, and health sciences is how to partition an exposure effect (e.g. treatment or risk factor) among specific pathway effects and to quantify the importance of each pathway. Mediation analysis based on the potential outcomes framework is an important tool to address this problem and we consider the estimation of mediation effects for the proportional hazards model in this paper. We give precise definitions of the total effect, natural indirect effect, and natural direct effect in terms of the survival probability, hazard function, and restricted mean survival time within the standard two-stage mediation framework. To estimate the mediation effects on different scales, we propose a mediation formula approach in which simple parametric models (fractional polynomials or restricted cubic splines) are utilized to approximate the baseline log cumulative hazard function. Simulation study results demonstrate low bias of the mediation effect estimators and close-to-nominal coverage probability of the confidence intervals for a wide range of complex hazard shapes. We apply this method to the Jackson Heart Study data and conduct sensitivity analysis to assess the impact on the mediation effects inference when the no unmeasured mediator-outcome confounding assumption is violated.

Toxicology primer: understanding workplace hazards and protecting worker health.

Science.gov (United States)

Arble, Janice

2004-06-01

Hazardous substances are ubiquitous in the environment and common in industrialized societies. Serious harm can occur with sufficient exposures under certain conditions. However, much harm can be avoided if hazardous substances are handled with respect and appreciation for their use and potential. Occupational health nurses must be aware of potential hazards to employees in the work environment and apply scientific principles to their practice of promoting worker safety and health.

Perception and prevalence of work-related health hazards among health care workers in public health facilities in southern India.

Science.gov (United States)

Senthil, Arasi; Anandh, Balasubramanian; Jayachandran, Palsamy; Thangavel, Gurusamy; Josephin, Diana; Yamini, Ravindran; Kalpana, Balakrishnan

2015-01-01

Health care workers (HCWs) are exposed to occupational related health hazards. Measuring worker perception and the prevalence of these hazards can help facilitate better risk management for HCWs, as these workers are envisaged to be the first point of contact, especially in resource poor settings. To describe the perception of occupational health hazards and self-reported exposure prevalence among HCWs in Southern India. We used cross sectional design with stratified random sampling of HCWs from different levels of health facilities and categories in a randomly selected district in Southern India. Data on perception and exposure prevalence were collected using a structured interview schedule developed by occupational health experts and administered by trained investigators. A total of 482 HCWs participated. Thirty nine percent did not recognize work-related health hazards, but reported exposure to at least one hazard upon further probing. Among the 81·5% who reported exposure to biological hazard, 93·9% had direct skin contact with infectious materials. Among HCWs reporting needle stick injury, 70·5% had at least one in the previous three months. Ergonomic hazards included lifting heavy objects (42%) and standing for long hours (37%). Psychological hazards included negative feelings (20·3%) and verbal or physical abuse during work (20·5%). More than a third of HCWs failed to recognize work-related health hazards. Despite training in handling infectious materials, HCWs reported direct skin contact with infectious materials and needle stick injuries. RESULTS indicate the need for training oriented toward behavioral change and provision of occupational health services.

Surface Fire Hazards Analysis Technical Report-Constructor Facilities

International Nuclear Information System (INIS)

Flye, R.E.

2000-01-01

The purpose of this Fire Hazards Analysis Technical Report (hereinafter referred to as Technical Report) is to assess the risk from fire within individual fire areas to ascertain whether the U.S. Department of Energy (DOE) fire safety objectives are met. The objectives identified in DOE Order 420.1, Change 2, Facility Safety, Section 4.2, establish requirements for a comprehensive fire and related hazards protection program for facilities sufficient to minimize the potential for: The occurrence of a fire or related event; A fire that causes an unacceptable on-site or off-site release of hazardous or radiological material that will threaten the health and safety of employees, the public, or the environment; Vital DOE programs suffering unacceptable interruptions as a result of fire and related hazards; Property losses from a fire and related events exceeding defined limits established by DOE; and Critical process controls and safety class systems being damaged as a result of a fire and related events

Modeling and Hazard Analysis Using STPA

Science.gov (United States)

Ishimatsu, Takuto; Leveson, Nancy; Thomas, John; Katahira, Masa; Miyamoto, Yuko; Nakao, Haruka

2010-09-01

A joint research project between MIT and JAXA/JAMSS is investigating the application of a new hazard analysis to the system and software in the HTV. Traditional hazard analysis focuses on component failures but software does not fail in this way. Software most often contributes to accidents by commanding the spacecraft into an unsafe state(e.g., turning off the descent engines prematurely) or by not issuing required commands. That makes the standard hazard analysis techniques of limited usefulness on software-intensive systems, which describes most spacecraft built today. STPA is a new hazard analysis technique based on systems theory rather than reliability theory. It treats safety as a control problem rather than a failure problem. The goal of STPA, which is to create a set of scenarios that can lead to a hazard, is the same as FTA but STPA includes a broader set of potential scenarios including those in which no failures occur but the problems arise due to unsafe and unintended interactions among the system components. STPA also provides more guidance to the analysts that traditional fault tree analysis. Functional control diagrams are used to guide the analysis. In addition, JAXA uses a model-based system engineering development environment(created originally by Leveson and called SpecTRM) which also assists in the hazard analysis. One of the advantages of STPA is that it can be applied early in the system engineering and development process in a safety-driven design process where hazard analysis drives the design decisions rather than waiting until reviews identify problems that are then costly or difficult to fix. It can also be applied in an after-the-fact analysis and hazard assessment, which is what we did in this case study. This paper describes the experimental application of STPA to the JAXA HTV in order to determine the feasibility and usefulness of the new hazard analysis technique. Because the HTV was originally developed using fault tree analysis

Information System Hazard Analysis: A Method for Identifying Technology-induced Latent Errors for Safety.

Science.gov (United States)

Weber, Jens H; Mason-Blakley, Fieran; Price, Morgan

2015-01-01

Many health information and communication technologies (ICT) are safety-critical; moreover, reports of technology-induced adverse events related to them are plentiful in the literature. Despite repeated criticism and calls to action, recent data collected by the Institute of Medicine (IOM) and other organization do not indicate significant improvements with respect to the safety of health ICT systems. A large part of the industry still operates on a reactive "break & patch" model; the application of pro-active, systematic hazard analysis methods for engineering ICT that produce "safe by design" products is sparse. This paper applies one such method: Information System Hazard Analysis (ISHA). ISHA adapts and combines hazard analysis techniques from other safety-critical domains and customizes them for ICT. We provide an overview of the steps involved in ISHA and describe.

21 CFR 2.5 - Imminent hazard to the public health.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Imminent hazard to the public health. 2.5 Section... GENERAL ADMINISTRATIVE RULINGS AND DECISIONS General Provisions § 2.5 Imminent hazard to the public health... a significant threat of danger to health, creates a public health situation (1) that should be...

Development of a systematic methodology to select hazard analysis techniques for nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Vasconcelos, Vanderley de; Reis, Sergio Carneiro dos; Costa, Antonio Carlos Lopes da [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)]. E-mails: vasconv@cdtn.br; reissc@cdtn.br; aclc@cdtn.br; Jordao, Elizabete [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Quimica]. E-mail: bete@feq.unicamp.br

2008-07-01

In order to comply with licensing requirements of regulatory bodies risk assessments of nuclear facilities should be carried out. In Brazil, such assessments are part of the Safety Analysis Reports, required by CNEN (Brazilian Nuclear Energy Commission), and of the Risk Analysis Studies, required by the competent environmental bodies. A risk assessment generally includes the identification of the hazards and accident sequences that can occur, as well as the estimation of the frequencies and effects of these unwanted events on the plant, people, and environment. The hazard identification and analysis are also particularly important when implementing an Integrated Safety, Health, and Environment Management System following ISO 14001, BS 8800 and OHSAS 18001 standards. Among the myriad of tools that help the process of hazard analysis can be highlighted: CCA (Cause- Consequence Analysis); CL (Checklist Analysis); ETA (Event Tree Analysis); FMEA (Failure Mode and Effects Analysis); FMECA (Failure Mode, Effects and Criticality Analysis); FTA (Fault Tree Analysis); HAZOP (Hazard and Operability Study); HRA (Human Reliability Analysis); Pareto Analysis; PHA (Preliminary Hazard Analysis); RR (Relative Ranking); SR (Safety Review); WI (What-If); and WI/CL (What-If/Checklist Analysis). The choice of a particular technique or a combination of techniques depends on many factors like motivation of the analysis, available data, complexity of the process being analyzed, expertise available on hazard analysis, and initial perception of the involved risks. This paper presents a systematic methodology to select the most suitable set of tools to conduct the hazard analysis, taking into account the mentioned involved factors. Considering that non-reactor nuclear facilities are, to a large extent, chemical processing plants, the developed approach can also be applied to analysis of chemical and petrochemical plants. The selected hazard analysis techniques can support cost

Development of a systematic methodology to select hazard analysis techniques for nuclear facilities

International Nuclear Information System (INIS)

Vasconcelos, Vanderley de; Reis, Sergio Carneiro dos; Costa, Antonio Carlos Lopes da; Jordao, Elizabete

2008-01-01

In order to comply with licensing requirements of regulatory bodies risk assessments of nuclear facilities should be carried out. In Brazil, such assessments are part of the Safety Analysis Reports, required by CNEN (Brazilian Nuclear Energy Commission), and of the Risk Analysis Studies, required by the competent environmental bodies. A risk assessment generally includes the identification of the hazards and accident sequences that can occur, as well as the estimation of the frequencies and effects of these unwanted events on the plant, people, and environment. The hazard identification and analysis are also particularly important when implementing an Integrated Safety, Health, and Environment Management System following ISO 14001, BS 8800 and OHSAS 18001 standards. Among the myriad of tools that help the process of hazard analysis can be highlighted: CCA (Cause- Consequence Analysis); CL (Checklist Analysis); ETA (Event Tree Analysis); FMEA (Failure Mode and Effects Analysis); FMECA (Failure Mode, Effects and Criticality Analysis); FTA (Fault Tree Analysis); HAZOP (Hazard and Operability Study); HRA (Human Reliability Analysis); Pareto Analysis; PHA (Preliminary Hazard Analysis); RR (Relative Ranking); SR (Safety Review); WI (What-If); and WI/CL (What-If/Checklist Analysis). The choice of a particular technique or a combination of techniques depends on many factors like motivation of the analysis, available data, complexity of the process being analyzed, expertise available on hazard analysis, and initial perception of the involved risks. This paper presents a systematic methodology to select the most suitable set of tools to conduct the hazard analysis, taking into account the mentioned involved factors. Considering that non-reactor nuclear facilities are, to a large extent, chemical processing plants, the developed approach can also be applied to analysis of chemical and petrochemical plants. The selected hazard analysis techniques can support cost

Physically and psychologically hazardous jobs and mental health in Thailand.

Science.gov (United States)

Yiengprugsawan, Vasoontara; Strazdins, Lyndall; Lim, Lynette L-Y; Kelly, Matthew; Seubsman, Sam-ang; Sleigh, Adrian C

2015-09-01

This paper investigates associations between hazardous jobs, mental health and wellbeing among Thai adults. In 2005, 87 134 distance-learning students from Sukhothai Thammathirat Open University completed a self-administered questionnaire; at the 2009 follow-up 60 569 again participated. Job characteristics were reported in 2005, psychological distress and life satisfaction were reported in both 2005 and 2009. We derived two composite variables grading psychologically and physically hazardous jobs and reported adjusted odds ratios (AOR) from multivariate logistic regressions. Analyses focused on cohort members in paid work: the total was 62 332 at 2005 baseline and 41 671 at 2009 follow-up. Cross-sectional AORs linking psychologically hazardous jobs to psychological distress ranged from 1.52 (one hazard) to 4.48 (four hazards) for males and a corresponding 1.34-3.76 for females. Similarly AORs for physically hazardous jobs were 1.75 (one hazard) to 2.76 (four or more hazards) for males and 1.70-3.19 for females. A similar magnitude of associations was found between psychologically adverse jobs and low life satisfaction (AORs of 1.34-4.34 among males and 1.18-3.63 among females). Longitudinal analyses confirm these cross-sectional relationships. Thus, significant dose-response associations were found linking hazardous job exposures in 2005 to mental health and wellbeing in 2009. The health impacts of psychologically and physically hazardous jobs in developed, Western countries are equally evident in transitioning Southeast Asian countries such as Thailand. Regulation and monitoring of work conditions will become increasingly important to the health and wellbeing of the Thai workforce. © The Author 2013. Published by Oxford University Press.

Physically and psychologically hazardous jobs and mental health in Thailand

Science.gov (United States)

Yiengprugsawan, Vasoontara; Strazdins, Lyndall; Lim, Lynette L.-Y.; Kelly, Matthew; Seubsman, Sam-ang; Sleigh, Adrian C.

2015-01-01

This paper investigates associations between hazardous jobs, mental health and wellbeing among Thai adults. In 2005, 87 134 distance-learning students from Sukhothai Thammathirat Open University completed a self-administered questionnaire; at the 2009 follow-up 60 569 again participated. Job characteristics were reported in 2005, psychological distress and life satisfaction were reported in both 2005 and 2009. We derived two composite variables grading psychologically and physically hazardous jobs and reported adjusted odds ratios (AOR) from multivariate logistic regressions. Analyses focused on cohort members in paid work: the total was 62 332 at 2005 baseline and 41 671 at 2009 follow-up. Cross-sectional AORs linking psychologically hazardous jobs to psychological distress ranged from 1.52 (one hazard) to 4.48 (four hazards) for males and a corresponding 1.34–3.76 for females. Similarly AORs for physically hazardous jobs were 1.75 (one hazard) to 2.76 (four or more hazards) for males and 1.70–3.19 for females. A similar magnitude of associations was found between psychologically adverse jobs and low life satisfaction (AORs of 1.34–4.34 among males and 1.18–3.63 among females). Longitudinal analyses confirm these cross-sectional relationships. Thus, significant dose–response associations were found linking hazardous job exposures in 2005 to mental health and wellbeing in 2009. The health impacts of psychologically and physically hazardous jobs in developed, Western countries are equally evident in transitioning Southeast Asian countries such as Thailand. Regulation and monitoring of work conditions will become increasingly important to the health and wellbeing of the Thai workforce. PMID:24218225

Comparative Distributions of Hazard Modeling Analysis

Directory of Open Access Journals (Sweden)

Rana Abdul Wajid

2006-07-01

Full Text Available In this paper we present the comparison among the distributions used in hazard analysis. Simulation technique has been used to study the behavior of hazard distribution modules. The fundamentals of Hazard issues are discussed using failure criteria. We present the flexibility of the hazard modeling distribution that approaches to different distributions.

Canister storage building hazard analysis report

International Nuclear Information System (INIS)

Krahn, D.E.; Garvin, L.J.

1997-01-01

This report describes the methodology used in conducting the Canister Storage Building (CSB) hazard analysis to support the final CSB safety analysis report (SAR) and documents the results. The hazard analysis was performed in accordance with DOE-STD-3009-94, Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Safety Analysis Report, and implements the requirements of DOE Order 5480.23, Nuclear Safety Analysis Report

Hydrotreater/Distillation Column Hazard Analysis Report Rev. 2

Energy Technology Data Exchange (ETDEWEB)

Lowry, Peter P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wagner, Katie A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-04-15

This project Hazard and Risk Analysis Report contains the results of several hazard analyses and risk assessments. An initial assessment was conducted in 2012, which included a multi-step approach ranging from design reviews to a formal What-If hazard analysis. A second What-If hazard analysis was completed during February 2013 to evaluate the operation of the hydrotreater/distillation column processes to be installed in a process enclosure within the Process Development Laboratory West (PDL-West) facility located on the PNNL campus. The qualitative analysis included participation of project and operations personnel and applicable subject matter experts. The analysis identified potential hazardous scenarios, each based on an initiating event coupled with a postulated upset condition. The unmitigated consequences of each hazardous scenario were generally characterized as a process upset; the exposure of personnel to steam, vapors or hazardous material; a spray or spill of hazardous material; the creation of a flammable atmosphere; or an energetic release from a pressure boundary.

Environmental epidemiology, Volume 1: Public health and hazardous wastes

International Nuclear Information System (INIS)

Anon.

1991-01-01

Environmental Epidemiology, Volume 1, represents the first of several planned volumes on the uses of epidemiologic techniques to study environmental public health issues. This text focuses on environmental epidemiology as it relates to hazardous waste in the United States. This study was commissioned by the Agency for Toxic Substances and Disease Registry to examine available data for evidence of adverse health effects on human populations exposed to hazardous waste. The committee was also asked to identify data gaps which were impediments to analyzing hazardous waste health effects and to suggest ways that such environmental health assessments might be improved. The committee's solution to the paucity of data on this issue was to concentrate in this volume on identifying the available, peer-reviewed data and, consequently, the major data gaps. The study opens with a recapitulation of the context of hazardous waste sites in the United States, the approaches currently used by state and federal epidemiologists in analyzing hazardous waste exposure and effects, and candid assessment of the problems associated with environmental exposure assessment. From that context, the committee then presents the data currently available to assess human exposures through air, domestic water consumption, soil, and the food chain. The general focus here is on biomarker data as the date of choice. As with all NAS reports, this one closes with general conclusions and recommendations. Environmental health risk assessors will find this volume a valuable resource

Potential health hazard of nuclear fuel waste and uranium ore

International Nuclear Information System (INIS)

Mehta, K.; Sherman, G.R.; King, S.G.

1991-06-01

The variation of the radioactivity of nuclear fuel waste (used fuel and fuel reprocessing waste) with time, and the potential health hazard (or inherent radiotoxicity) resulting from its ingestion are estimated for CANDU (Canada Deuterium Uranium) natural-uranium reactors. Four groups of radionuclides in the nuclear fuel waste are considered: actinides, fission products, activation products of zircaloy, and activation products of fuel impurities. Contributions from each of these groups to the radioactivity and to the potential health hazard are compared and discussed. The potential health hazard resulting from used fuel is then compared with that of uranium ore, mine tailings and refined uranium (fresh fuel) on the basis of equivalent amounts of uranium. The computer code HAZARD, specifically developed for these computations, is described

Occupational health hazards among health care workers of Shahid Sadoughi Hospital

Directory of Open Access Journals (Sweden)

F. Ghavidel

2007-04-01

Full Text Available Background and AimsBiological hazards exist throughout all healthcare settings and include airborne and blood borne pathogens. Health care workers are also subject to exposure to hazardous chemicals such as disinfectants and sterilizing agents. In addition to the traditional aforementioned categories of occupational hazards, health care workers experience the stress of being directly responsible for the care of very sick and dying patients, which, coupled with  increasing workloads, can seriously threaten their health and well-being.MethodsThe study population was all hospital staff (# 207, of whom198 health care workers eventually participated in the study. The questionnaires were administered to doctors, nurses and ward orderlies in Shahid Sadoughi Teaching Hospital Yazd, Iran. Data were analyzed by SPSS11.5 software using Fisher's exact and Chi square tests.ResultsThe common occupational health hazards were work-related stress (60.1%, bloodstains on skin (51%, needle-stick injuries (42.9%, assault from patients (21.2%, skin reaction (19.2%, sleep disturbance (15.2%, stew blood on mucosal (3.1% and use of drugs (4.5%. Nearly 4.5% of the staff used tranquilizers to cope with the work stress. A greater percentage of doctors compared to nurses and ward orderlies used safety precautions such as gloves, facemasks and aprons. 70.2% staff employed regular hand-washing after various procedures 68.2% of staff adopted regularly proper disposal of needles and sharps into separate puncture resistant containers. About 55.6% of the staff recap used needles.ConclusionIn according to frequent types of occupational related dangers, corporation between chiefs and members of health care center to decrease these seems wishful and we recommend preparing and distributing necessary guidelines with related awareness among these groups.

Probabilistic Tsunami Hazard Analysis

Science.gov (United States)

Thio, H. K.; Ichinose, G. A.; Somerville, P. G.; Polet, J.

2006-12-01

The recent tsunami disaster caused by the 2004 Sumatra-Andaman earthquake has focused our attention to the hazard posed by large earthquakes that occur under water, in particular subduction zone earthquakes, and the tsunamis that they generate. Even though these kinds of events are rare, the very large loss of life and material destruction caused by this earthquake warrant a significant effort towards the mitigation of the tsunami hazard. For ground motion hazard, Probabilistic Seismic Hazard Analysis (PSHA) has become a standard practice in the evaluation and mitigation of seismic hazard to populations in particular with respect to structures, infrastructure and lifelines. Its ability to condense the complexities and variability of seismic activity into a manageable set of parameters greatly facilitates the design of effective seismic resistant buildings but also the planning of infrastructure projects. Probabilistic Tsunami Hazard Analysis (PTHA) achieves the same goal for hazards posed by tsunami. There are great advantages of implementing such a method to evaluate the total risk (seismic and tsunami) to coastal communities. The method that we have developed is based on the traditional PSHA and therefore completely consistent with standard seismic practice. Because of the strong dependence of tsunami wave heights on bathymetry, we use a full waveform tsunami waveform computation in lieu of attenuation relations that are common in PSHA. By pre-computing and storing the tsunami waveforms at points along the coast generated for sets of subfaults that comprise larger earthquake faults, we can efficiently synthesize tsunami waveforms for any slip distribution on those faults by summing the individual subfault tsunami waveforms (weighted by their slip). This efficiency make it feasible to use Green's function summation in lieu of attenuation relations to provide very accurate estimates of tsunami height for probabilistic calculations, where one typically computes

Hazard-ranking of agricultural pesticides for chronic health effects in Yuma County, Arizona.

Science.gov (United States)

Sugeng, Anastasia J; Beamer, Paloma I; Lutz, Eric A; Rosales, Cecilia B

2013-10-01

With thousands of pesticides registered by the United States Environmental Protection Agency, it not feasible to sample for all pesticides applied in agricultural communities. Hazard-ranking pesticides based on use, toxicity, and exposure potential can help prioritize community-specific pesticide hazards. This study applied hazard-ranking schemes for cancer, endocrine disruption, and reproductive/developmental toxicity in Yuma County, Arizona. An existing cancer hazard-ranking scheme was modified, and novel schemes for endocrine disruption and reproductive/developmental toxicity were developed to rank pesticide hazards. The hazard-ranking schemes accounted for pesticide use, toxicity, and exposure potential based on chemical properties of each pesticide. Pesticides were ranked as hazards with respect to each health effect, as well as overall chronic health effects. The highest hazard-ranked pesticides for overall chronic health effects were maneb, metam-sodium, trifluralin, pronamide, and bifenthrin. The relative pesticide rankings were unique for each health effect. The highest hazard-ranked pesticides differed from those most heavily applied, as well as from those previously detected in Yuma homes over a decade ago. The most hazardous pesticides for cancer in Yuma County, Arizona were also different from a previous hazard-ranking applied in California. Hazard-ranking schemes that take into account pesticide use, toxicity, and exposure potential can help prioritize pesticides of greatest health risk in agricultural communities. This study is the first to provide pesticide hazard-rankings for endocrine disruption and reproductive/developmental toxicity based on use, toxicity, and exposure potential. These hazard-ranking schemes can be applied to other agricultural communities for prioritizing community-specific pesticide hazards to target decreasing health risk. Copyright © 2013 Elsevier B.V. All rights reserved.

Hazard-Ranking of Agricultural Pesticides for Chronic Health Effects in Yuma County, Arizona

Science.gov (United States)

Sugeng, Anastasia J.; Beamer, Paloma I.; Lutz, Eric A.; Rosales, Cecilia B.

2013-01-01

With thousands of pesticides registered by the United States Environmental Protection Agency, it not feasible to sample for all pesticides applied in agricultural communities. Hazard-ranking pesticides based on use, toxicity, and exposure potential can help prioritize community-specific pesticide hazards. This study applied hazard-ranking schemes for cancer, endocrine disruption, and reproductive/developmental toxicity in Yuma County, Arizona. An existing cancer hazard-ranking scheme was modified, and novel schemes for endocrine disruption and reproductive/developmental toxicity were developed to rank pesticide hazards. The hazard-ranking schemes accounted for pesticide use, toxicity, and exposure potential based on chemical properties of each pesticide. Pesticides were ranked as hazards with respect to each health effect, as well as overall chronic health effects. The highest hazard-ranked pesticides for overall chronic health effects were maneb, metam sodium, trifluralin, pronamide, and bifenthrin. The relative pesticide rankings were unique for each health effect. The highest hazard-ranked pesticides differed from those most heavily applied, as well as from those previously detected in Yuma homes over a decade ago. The most hazardous pesticides for cancer in Yuma County, Arizona were also different from a previous hazard-ranking applied in California. Hazard-ranking schemes that take into account pesticide use, toxicity, and exposure potential can help prioritize pesticides of greatest health risk in agricultural communities. This study is the first to provide pesticide hazard-rankings for endocrine disruption and reproductive/developmental toxicity based on use, toxicity, and exposure potential. These hazard-ranking schemes can be applied to other agricultural communities for prioritizing community-specific pesticide hazards to target decreasing health risk. PMID:23783270

Review of hazards to female reproductive health in veterinary practice.

Science.gov (United States)

Scheftel, Joni M; Elchos, Brigid L; Rubin, Carol S; Decker, John A

2017-04-15

OBJECTIVE To review publications that address female reproductive health hazards in veterinary practice, summarize best practices to mitigate reproductive risks, and identify current knowledge gaps. DESIGN Systematized review. SAMPLE English-language articles describing chemical, biological, and physical hazards present in the veterinary workplace and associations with adverse reproductive outcomes or recommendations for minimizing risks to female reproductive health. PROCEDURES Searches of the CAB abstracts database were performed in July 2012 and in May 2015 with the following search terms: veterinarians AND occupational hazards and vets.id AND occupational hazards.sh. Searches of the PubMed database were conducted in November 2012 and in May 2015 with the following medical subject heading terms: occupational exposure AND veterinarians; anesthetics, inhalation/adverse effects AND veterinarians; risk factors AND pregnancy AND veterinarians; pregnancy outcome AND veterinarians; and animal technicians AND occupational exposure. Two additional PubMed searches were completed in January 2016 with the terms disinfectants/toxicity AND female AND fertility/drug effects and veterinarians/psychology AND stress, psychological. No date limits were applied to searches. RESULTS 4 sources supporting demographic trends in veterinary medicine and 118 resources reporting potential hazards to female reproductive health were identified. Reported hazards included exposure to anesthetic gases, radiation, antineoplastic drugs, and reproductive hormones; physically demanding work; prolonged standing; and zoonoses. CONCLUSIONS AND CLINICAL RELEVANCE Demographic information suggested that an increasing number of women of reproductive age will be exposed to chemical, biological, and physical hazards in veterinary practice. Information on reproductive health hazards and minimizing risk, with emphasis on developing a safety-focused work culture for all personnel, should be discussed starting

Recognizing Job Health Hazards. Module SH-08. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on recognizing job health hazards is one of 50 modules concerned with job safety and health. This module presents the four general categories of environmental conditions or stresses: chemical, physical, biological, and ergonomic. Following the introduction, 14 objectives (each keyed to a page in the text) the student is…

REFUSE DISPOSAL AND ITS ATTENDANT HEALTH HAZARDS: A ...

African Journals Online (AJOL)

Oyem

HAZARDS: A CASE STUDY OF AGBOR, DELTA STATE OF. NIGERIA ... acceptable environmental quality, sound public health, and ... solid waste management and public health, .... by the public relations department of the council to sensitize.

Hazard Analysis for Pneumatic Flipper Suitport/Z-1 Manned Evaluation, Chamber B, Building 32. Revision: Basic

Science.gov (United States)

2012-01-01

One of the characteristics of an effective safety program is the recognition and control of hazards before mishaps or failures occur. Conducting potentially hazardous tests necessitates a thorough hazard analysis in order to protect our personnel from injury and our equipment from damage. The purpose of this hazard analysis is to define and address the potential hazards and controls associated with the Z1 Suit Port Test in Chamber B located in building 32, and to provide the applicable team of personnel with the documented results. It is imperative that each member of the team be familiar with the hazards and controls associated with his/her particular tasks, assignments, and activities while interfacing with facility test systems, equipment, and hardware. The goal of this hazard analysis is to identify all hazards that have the potential to harm personnel and/or damage facility equipment, flight hardware, property, or harm the environment. This analysis may also assess the significance and risk, when applicable, of lost test objectives when substantial monetary value is involved. The hazards, causes, controls, verifications, and risk assessment codes have been documented on the hazard analysis work sheets in appendix A of this document. The preparation and development of this report is in accordance with JPR 1700.1, JSC Safety and Health Handbook.

Hazardous waste and health impact: a systematic review of the scientific literature.

Science.gov (United States)

Fazzo, L; Minichilli, F; Santoro, M; Ceccarini, A; Della Seta, M; Bianchi, F; Comba, P; Martuzzi, M

2017-10-11

Waste is part of the agenda of the European Environment and Health Process and included among the topics of the Sixth Ministerial Conference on Environment and Health. Disposal and management of hazardous waste are worldwide challenges. We performed a systematic review to evaluate the evidence of the health impact of hazardous waste exposure, applying transparent and a priori defined methods. The following five steps, based on pre-defined systematic criteria, were applied. 1. Specify the research question, in terms of "Population-Exposure-Comparators-Outcomes" (PECO). people living near hazardous waste sites; Exposure: exposure to hazardous waste; Comparators: all comparators; Outcomes: all diseases/health disorders. 2. Carry out the literature search, in Medline and EMBASE. 3. Select studies for inclusion: original epidemiological studies, published between 1999 and 2015, on populations residentially exposed to hazardous waste. 4. Assess the quality of selected studies, taking into account study design, exposure and outcome assessment, confounding control. 5. Rate the confidence in the body of evidence for each outcome taking into account the reliability of each study, the strength of the association and concordance of results.Fifty-seven papers of epidemiological investigations on the health status of populations living near hazardous waste sites were selected for the evidence evaluation. The association between 95 health outcomes (diseases and disorders) and residential exposure to hazardous waste sites was evaluated. Health effects of residential hazardous waste exposure, previously partially unrecognized, were highlighted. Sufficient evidence was found of association between exposure to oil industry waste that releases high concentrations of hydrogen sulphide and acute symptoms. The evidence of causal relationship with hazardous waste was defined as limited for: liver, bladder, breast and testis cancers, non-Hodgkin lymphoma, asthma, congenital anomalies

Forecasting extreme temperature health hazards in Europe

Science.gov (United States)

Di Napoli, Claudia; Pappenberger, Florian; Cloke, Hannah L.

2017-04-01

Extreme hot temperatures, such as those experienced during a heat wave, represent a dangerous meteorological hazard to human health. Heat disorders such as sunstroke are harmful to people of all ages and responsible for excess mortality in the affected areas. In 2003 more than 50,000 people died in western and southern Europe because of a severe and sustained episode of summer heat [1]. Furthermore, according to the Intergovernmental Panel on Climate Change heat waves are expected to get more frequent in the future thus posing an increasing threat to human lives. Developing appropriate tools for extreme hot temperatures prediction is therefore mandatory to increase public preparedness and mitigate heat-induced impacts. A recent study has shown that forecasts of the Universal Thermal Climate Index (UTCI) provide a valid overview of extreme temperature health hazards on a global scale [2]. UTCI is a parameter related to the temperature of the human body and its regulatory responses to the surrounding atmospheric environment. UTCI is calculated using an advanced thermo-physiological model that includes the human heat budget, physiology and clothing. To forecast UTCI the model uses meteorological inputs, such as 2m air temperature, 2m water vapour pressure and wind velocity at body height derived from 10m wind speed, from NWP models. Here we examine the potential of UTCI as an extreme hot temperature prediction tool for the European area. UTCI forecasts calculated using above-mentioned parameters from ECMWF models are presented. The skill in predicting UTCI for medium lead times is also analysed and discussed for implementation to international health-hazard warning systems. This research is supported by the ANYWHERE project (EnhANcing emergencY management and response to extreme WeatHER and climate Events) which is funded by the European Commission's HORIZON2020 programme. [1] Koppe C. et al., Heat waves: risks and responses. World Health Organization. Health and

A situational analysis of priority disaster hazards in Uganda: findings from a hazard and vulnerability analysis.

Science.gov (United States)

Mayega, R W; Wafula, M R; Musenero, M; Omale, A; Kiguli, J; Orach, G C; Kabagambe, G; Bazeyo, W

2013-06-01

Most countries in sub-Saharan Africa have not conducted a disaster risk analysis. Hazards and vulnerability analyses provide vital information that can be used for development of risk reduction and disaster response plans. The purpose of this study was to rank disaster hazards for Uganda, as a basis for identifying the priority hazards to guide disaster management planning. The study as conducted in Uganda, as part of a multi-country assessment. A hazard, vulnerability and capacity analysis was conducted in a focus group discussion of 7 experts representing key stakeholder agencies in disaster management in Uganda. A simple ranking method was used to rank the probability of occurance of 11 top hazards, their potential impact and the level vulnerability of people and infrastructure. In-terms of likelihood of occurance and potential impact, the top ranked disaster hazards in Uganda are: 1) Epidemics of infectious diseases, 2) Drought/famine, 3) Conflict and environmental degradation in that order. In terms of vulnerability, the top priority hazards to which people and infrastructure were vulnerable were: 1) Conflicts, 2) Epidemics, 3) Drought/famine and, 4) Environmental degradation in that order. Poverty, gender, lack of information, and lack of resilience measures were some of the factors promoting vulnerability to disasters. As Uganda develops a disaster risk reduction and response plan, it ought to prioritize epidemics of infectious diseases, drought/famine, conflics and environmental degradation as the priority disaster hazards.

Social Hazards as Manifested Workplace Discrimination and Health (Vietnamese and Ukrainian Female and Male Migrants in Czechia).

Science.gov (United States)

Drbohlav, Dušan; Dzúrová, Dagmar

2017-10-10

Social hazards as one of the dimensions of workplace discrimination are a potential social determinant of health inequalities. The aim of this study was to investigate relations between self-reported health and social hazard characteristics (defined as-discrimination as such, violence or threat of violence, time pressure or work overload and risk of accident) among Vietnamese and Ukrainian migrants (males and females) in Czechia by age, education level and marital status. This study is based on data from a survey of 669 immigrants in Czechia in 2013. Logistic regression analysis indicates that the given independent variables (given social hazards and socio-demographic characteristics), as predictors of a quality of self-reported health are more important for immigrant females than for males, irrespective of citizenship, albeit only for some of them and to differing extents. We found out that being exposed to the selected social hazards in the workplace leads to worsening self-rated health, especially for females. On the other hand, there was no statistically significant relationship found between poor self-rated health and discrimination as such. Reality calls for more research and, consequently, better policies and practices in the field of health inequalities.

Social Hazards as Manifested Workplace Discrimination and Health (Vietnamese and Ukrainian Female and Male Migrants in Czechia

Directory of Open Access Journals (Sweden)

Dušan Drbohlav

2017-10-01

Full Text Available Social hazards as one of the dimensions of workplace discrimination are a potential social determinant of health inequalities. The aim of this study was to investigate relations between self-reported health and social hazard characteristics (defined as—discrimination as such, violence or threat of violence, time pressure or work overload and risk of accident among Vietnamese and Ukrainian migrants (males and females in Czechia by age, education level and marital status. This study is based on data from a survey of 669 immigrants in Czechia in 2013. Logistic regression analysis indicates that the given independent variables (given social hazards and socio-demographic characteristics, as predictors of a quality of self-reported health are more important for immigrant females than for males, irrespective of citizenship, albeit only for some of them and to differing extents. We found out that being exposed to the selected social hazards in the workplace leads to worsening self-rated health, especially for females. On the other hand, there was no statistically significant relationship found between poor self-rated health and discrimination as such. Reality calls for more research and, consequently, better policies and practices in the field of health inequalities.

Supplemental Hazard Analysis and Risk Assessment - Hydrotreater

Energy Technology Data Exchange (ETDEWEB)

Lowry, Peter P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wagner, Katie A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-04-01

A supplemental hazard analysis was conducted and quantitative risk assessment performed in response to an independent review comment received by the Pacific Northwest National Laboratory (PNNL) from the U.S. Department of Energy Pacific Northwest Field Office (PNSO) against the Hydrotreater/Distillation Column Hazard Analysis Report issued in April 2013. The supplemental analysis used the hazardous conditions documented by the previous April 2013 report as a basis. The conditions were screened and grouped for the purpose of identifying whether additional prudent, practical hazard controls could be identified, using a quantitative risk evaluation to assess the adequacy of the controls and establish a lower level of concern for the likelihood of potential serious accidents. Calculations were performed to support conclusions where necessary.

A proposal for performing software safety hazard analysis

International Nuclear Information System (INIS)

Lawrence, J.D.; Gallagher, J.M.

1997-01-01

Techniques for analyzing the safety and reliability of analog-based electronic protection systems that serve to mitigate hazards in process control systems have been developed over many years, and are reasonably understood. An example is the protection system in a nuclear power plant. The extension of these techniques to systems which include digital computers is not well developed, and there is little consensus among software engineering experts and safety experts on how to analyze such systems. One possible technique is to extend hazard analysis to include digital computer-based systems. Software is frequently overlooked during system hazard analyses, but this is unacceptable when the software is in control of a potentially hazardous operation. In such cases, hazard analysis should be extended to fully cover the software. A method for performing software hazard analysis is proposed in this paper. The method concentrates on finding hazards during the early stages of the software life cycle, using an extension of HAZOP

Health information technologies : From hazardous to the dark side

NARCIS (Netherlands)

Saunders, C.; Rutkowski, Anne; Pluyter, J.R.; Spanjers, R.

This article explores the effects of health information technologies (HIT) in operating rooms (ORs). When functioning well, HIT are a boon to mankind. However, HIT in the OR also create hazards for patients for a number of interrelated reasons. We introduce 5 interrelated components of hazard

Cold Vacuum Drying Facility hazard analysis report

Energy Technology Data Exchange (ETDEWEB)

Krahn, D.E.

1998-02-23

This report describes the methodology used in conducting the Cold Vacuum Drying Facility (CVDF) hazard analysis to support the CVDF phase 2 safety analysis report (SAR), and documents the results. The hazard analysis was performed in accordance with DOE-STD-3009-94, Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports, and implements the requirements of US Department of Energy (DOE) Order 5480.23, Nuclear Safety Analysis Reports.

Cold Vacuum Drying Facility hazard analysis report

International Nuclear Information System (INIS)

Krahn, D.E.

1998-01-01

This report describes the methodology used in conducting the Cold Vacuum Drying Facility (CVDF) hazard analysis to support the CVDF phase 2 safety analysis report (SAR), and documents the results. The hazard analysis was performed in accordance with DOE-STD-3009-94, Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports, and implements the requirements of US Department of Energy (DOE) Order 5480.23, Nuclear Safety Analysis Reports

The use of hazards analysis in the development of training

Energy Technology Data Exchange (ETDEWEB)

Houghton, F.K.

1998-12-01

A hazards analysis identifies the operation hazards and the positive measures that aid in the mitigation or prevention of the hazard. If the tasks are human intensive, the hazard analysis often credits the personnel training as contributing to the mitigation of the accident`s consequence or prevention of an accident sequence. To be able to credit worker training, it is important to understand the role of the training in the hazard analysis. Systematic training, known as systematic training design (STD), performance-based training (PBT), or instructional system design (ISD), uses a five-phase (analysis, design, development, implementation, and evaluation) model for the development and implementation of the training. Both a hazards analysis and a training program begin with a task analysis that documents the roles and actions of the workers. Though the tasks analyses are different in nature, there is common ground and both the hazard analysis and the training program can benefit from a cooperative effort. However, the cooperation should not end with the task analysis phase of either program. The information gained from the hazards analysis should be used in all five phases of the training development. The training evaluation, both of the individual worker and institutional training program, can provide valuable information to the hazards analysis effort. This paper will discuss the integration of the information from the hazards analysis into a training program. The paper will use the installation and removal of a piece of tooling that is used in a high-explosive operation. This example will be used to follow the systematic development of a training program and demonstrate the interaction and cooperation between the hazards analysis and training program.

Participatory health impact assessment for the development of local government regulation on hazard control

International Nuclear Information System (INIS)

Inmuong, Uraiwan; Rithmak, Panee; Srisookwatana, Soomol; Traithin, Nathathai; Maisuporn, Pornpun

2011-01-01

The Thai Public Health Act 1992 required the Thai local governments to issue respective regulations to take control of any possible health-hazard related activities, both from commercial and noncommercial sources. Since 1999, there has been centrally decentralized of power to a new form of local government establishment, namely Sub-district Administrative Organization (SAO). The SAO is asmall-scale local governing structure while its legitimate function is for community services, including control of health impact related activities. Most elected SAO administrators and officers are new and less experience with any of public health code of practice, particularly on health-hazard control. This action research attempted to introduce and apply a participatory health impact assessment (HIA) tool for the development of SAO health-hazard control regulation. The study sites were at Ban Meang and Kok See SAOs, Khon Kaen Province, Thailand, while all intervention activities conducted during May 2005-April 2006. A set of cooperative activities between researchers and community representatives were planned and organized by; surveying and identifying place and service base locally causing local environmental health problems, organizing community participatory workshops for drafting and proposing the health-hazard control regulation, and appropriate practices for health-hazard controlling measures. This action research eventually could successfully enable the SAO administrators and officers understanding of local environmental-related health problem, as well as development of imposed health-hazard control regulation for local community.

Health hazards of cement dust

International Nuclear Information System (INIS)

Meo, Sultan A.

2004-01-01

ven in the 21st century, millions of people are working daily in a dusty environment. They are exposed to different types of health hazards such as fume, gases and dust, which are risk factors in developing occupational disease. Cement industry is involved in the development of structure of this advanced and modern world but generates dust during its production. Cement dust causes lung function impairment, chronic obstructive lung disease, restrictive lung disease, pneumoconiosis and carcinoma of the lungs, stomach and colon. Other studies have shown that cement dust may enter into the systemic circulation and thereby reach the essentially all the organs of body and affects the different tissues including heart, liver, spleen, bone, muscles and hairs and ultimately affecting their micro-structure and physiological performance. Most of the studies have been previously attempted to evaluate the effects of cement dust exposure on the basis of spirometry or radiology, or both. However, collective effort describing the general effects of cement dust on different organ and systems in humans or animals, or both has not been published. Therefore, the aim of this review is to gather the potential toxic effects of cement dust and to minimize the health risks in cement mill workers by providing them with information regarding the hazards of cement dust. (author)

Using hazard maps to identify and eliminate workplace hazards: a union-led health and safety training program.

Science.gov (United States)

Anderson, Joe; Collins, Michele; Devlin, John; Renner, Paul

2012-01-01

The Institute for Sustainable Work and Environment and the Utility Workers Union of America worked with a professional evaluator to design, implement, and evaluate the results of a union-led system of safety-based hazard identification program that trained workers to use hazard maps to identify workplace hazards and target them for elimination. The evaluation documented program implementation and impact using data collected from both qualitative interviews and an on-line survey from worker trainers, plant managers, and health and safety staff. Managers and workers reported that not only were many dangerous hazards eliminated as a result of hazard mapping, some of which were long-standing, difficult-to-resolve issues, but the evaluation also documented improved communication between union members and management that both workers and managers agreed resulted in better, more sustainable hazard elimination.

Women's Magazines' Coverage of Smoking Related Health Hazards.

Science.gov (United States)

Kessler, Lauren

1989-01-01

Examines the extent to which women's magazines with a strong interest in health covered various health hazards associated with smoking. Finds that six major women's magazines have virtually no coverage of smoking and cancer. Suggests that self-censorship may have helped determine editorial content more than pressure from tobacco companies. (RS)

Repository Subsurface Preliminary Fire Hazard Analysis

International Nuclear Information System (INIS)

Logan, Richard C.

2001-01-01

This fire hazard analysis identifies preliminary design and operations features, fire, and explosion hazards, and provides a reasonable basis to establish the design requirements of fire protection systems during development and emplacement phases of the subsurface repository. This document follows the Technical Work Plan (TWP) (CRWMS M and O 2001c) which was prepared in accordance with AP-2.21Q, ''Quality Determinations and Planning for Scientific, Engineering, and Regulatory Compliance Activities''; Attachment 4 of AP-ESH-008, ''Hazards Analysis System''; and AP-3.11Q, ''Technical Reports''. The objective of this report is to establish the requirements that provide for facility nuclear safety and a proper level of personnel safety and property protection from the effects of fire and the adverse effects of fire-extinguishing agents

40 CFR 68.67 - Process hazard analysis.

Science.gov (United States)

2010-07-01

...) Hazard and Operability Study (HAZOP); (5) Failure Mode and Effects Analysis (FMEA); (6) Fault Tree...) The hazards of the process; (2) The identification of any previous incident which had a likely...

Example process hazard analysis of a Department of Energy water chlorination process

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

On February 24, 1992, the Occupational Safety and Health Administration (OSHA) released a revised version of Section 29 Code of Federal Regulations CFR Part 1910 that added Section 1910.119, entitled ``Process Safety Management of Highly Hazardous Chemicals`` (the PSM Rule). Because US Department of Energy (DOE) Orders 5480.4 and 5483.1A prescribe OSHA 29 CFR 1910 as a standard in DOE, the PSM Rule is mandatory in the DOE complex. A major element in the PSM Rule is the process hazard analysis (PrHA), which is required for all chemical processes covered by the PSM Rule. The PrHA element of the PSM Rule requires the selection and application of appropriate hazard analysis methods to systematically identify hazards and potential accident scenarios associated with processes involving highly hazardous chemicals (HHCs). The analysis in this report is an example PrHA performed to meet the requirements of the PSM Rule. The PrHA method used in this example is the hazard and operability (HAZOP) study, and the process studied is the new Hanford 300-Area Water Treatment Facility chlorination process, which is currently in the design stage. The HAZOP study was conducted on May 18--21, 1993, by a team from the Westinghouse Hanford Company (WHC), Battelle-Columbus, the DOE, and Pacific Northwest Laboratory (PNL). The chlorination process was chosen as the example process because it is common to many DOE sites, and because quantities of chlorine at those sites generally exceed the OSHA threshold quantities (TQs).

Hazardous alcohol use among doctors in a Tertiary Health Center

Directory of Open Access Journals (Sweden)

Adetunji Obadeji

2015-01-01

Full Text Available Background: Doctors have been identified as one of the key agents in the prevention of alcohol-related harm, however, their level of use and attitudes toward alcohol will affect such role. Aim: This study is aimed at describing the pattern of alcohol use and the predictors of hazardous drinking among hospital doctors. Setting: Study was conducted at the Ekiti State University Teaching Hospital, Ado-Ekiti, Nigeria. Design: A cross-sectional survey involving all the doctors in the teaching hospital. Materials and Methods: All the consenting clinicians completed a sociodemographic questionnaire and alcohol use was measured using the 10-item alcohol use disorder identification test (AUDIT and psychological well-being was measured by the 12-item General Health Questionnaire (GHQ-12. Statistical Analysis Used: Statistical analyses were done using the Statistical Package for Social Sciences version 16. Chi-square tests with Yates correction were used to describe the relationship between respondent′s characteristics and AUDIT scores as appropriate. Results: There were a total of 122 participants. Eighty-five (69.7% of them were abstainers, 28 (23% were moderate drinkers, and 9 (7.3% hazardous drinkers. With the exception of age, there was no significant relationship between sociodemographic status, years of practice, specialty of practice, and hazardous alcohol use. Experiencing stress or GHQ score above average is significantly associated with hazardous drinking. Conclusion: Hazardous drinking among hospital doctors appears to be essentially a problem of the male gender, especially among those older than 40 years. Stress and other form of psychological distress seem to play a significant role in predicting hazardous drinking among doctors.

Health hazards from environmental pollution

International Nuclear Information System (INIS)

Wichmann, H.E.

1990-01-01

Three examples from current research are cited in order to show the health hazards from environmental pollution and to describe methods of risk quantification: (1) The smog situation of January 1985 is analyzed on the basis of detailed morbidity and mortality statistics; (2) The current knowledge on the contribution of radon decay products to lung cancer is discussed; (3) The problem of abandoned industrial sites is illustrated by a population group living on contaminated ground. (orig.) [de

Hazardous Health Behaviour among Medical Students: a Study from Turkey.

Science.gov (United States)

Nacar, Melis; Cetinkaya, Fevziye; Baykan, Zeynep; Yilmazel, Gulay; Elmali, Ferhan

2015-01-01

Hazardous health behaviour in young people is an important factor that affects the individual risk for non-communicable diseases and other disorders later in life. This study aimed to determine the hazardous health behaviour of first and last class medical students of Erciyes University. This descriptive study was carried out with 240 medical students from the first and 130 students from the last (sixth) class. Data were obtained by questionnaire between March-April 2012. In total, 339 students were included with a response rate of 91.6%. Socio-demographic characteristics, school success, self-reported economic difficulties, health perceptions, hazardous health behaviour related to chronic disease, tobacco, alcohol, substance use, body weight, height, traffic, violence and nutrition were assessed in line with the literature. Of the participants; 64.0% were from first and 36.0% were from the last class. Mean ages for the first and last classes were 19.4 ± 1.5 and 24.0 ± 1.5 years, respectively. In the current study, males exhibited more hazardous behaviour than females. Sime 19.8% of the students in the study group used alcohol, 35.4% used a waterpipe, and 24.8% used tobacco at least once. These rates increased in both genders in the last class and the increase in males was significant. Some 3.8% of the students in the current study used pleasure-inducing illegal substances at least once. All the students participating in the current study were single, the number of males reported not using condoms (8.6%) was 4.56 times higher compared to females. Some 64.0% of the students did not perform physical activity lasting at least 30 minutes for five times a week, 13.0% did not sleep for mean 7-8 hours daily, males having a 2.9 times higher risk. More than 1/3 of the students did not consume cooked vegetable dishes and 1/4 did not consume fresh fruits and salads, the rates were higher among males. In the current study, hazardous health behaviour was prevalent among

Risk Assessment of Healthcare Waste by Preliminary Hazard Analysis Method

Directory of Open Access Journals (Sweden)

Pouran Morovati

2017-09-01

Full Text Available Introduction and purpose: Improper management of healthcare waste (HCW can pose considerable risks to human health and the environment and cause serious problems in developing countries such as Iran. In this study, we sought to determine the hazards of HCW in the public hospitals affiliated to Abadan School of Medicine using the preliminary hazard analysis (PHA method. Methods: In this descriptive and analytic study, health risk assessment of HCW in government hospitals affiliated to Abadan School of Medicine (4 public hospitals was carried out by using PHA in the summer of  2016. Results: We noted the high risk of sharps and infectious wastes. Considering the dual risk of injury and disease transmission, sharps were classified in the very high-risk group, and pharmaceutical and chemical and radioactive wastes were classified in the medium-risk group. Sharps posed the highest risk, while pharmaceutical and chemical wastes had the lowest risk. Among the various stages of waste management, the waste treatment stage was the most hazardous in all the studied hospitals. Conclusion: To diminish the risks associated with healthcare waste management in the studied hospitals, adequate training of healthcare workers and care providers, provision of suitable personal protective and transportation equipment, and supervision of the environmental health manager of hospitals should be considered by the authorities.  

Impacts on health and safety from transfer/consolidation of nuclear materials and hazardous chemicals

International Nuclear Information System (INIS)

Gallucci, R.H.V.

1994-11-01

Environmental restoration plans at the US Department of Energy (USDOE) Hanford Site calls for transfer/consolidation of ''targets/threats,'' namely nuclear materials and hazardous chemicals. Reductions in the health and safety hazards will depend on the plans implemented. Pacific Northwest Laboratory (PNL) estimated these potential impacts, assuming implementation of the current reference plan and employing ongoing risk and safety analyses. The results indicated the potential for ''significant'' reductions in health and safety hazards in the long term (> 25 years) and a potentially ''noteworthy'' reduction in health hazard in the short term (≤ 25 years)

Development of a Probabilistic Tsunami Hazard Analysis in Japan

International Nuclear Information System (INIS)

Toshiaki Sakai; Tomoyoshi Takeda; Hiroshi Soraoka; Ken Yanagisawa; Tadashi Annaka

2006-01-01

It is meaningful for tsunami assessment to evaluate phenomena beyond the design basis as well as seismic design. Because once we set the design basis tsunami height, we still have possibilities tsunami height may exceeds the determined design tsunami height due to uncertainties regarding the tsunami phenomena. Probabilistic tsunami risk assessment consists of estimating for tsunami hazard and fragility of structures and executing system analysis. In this report, we apply a method for probabilistic tsunami hazard analysis (PTHA). We introduce a logic tree approach to estimate tsunami hazard curves (relationships between tsunami height and probability of excess) and present an example for Japan. Examples of tsunami hazard curves are illustrated, and uncertainty in the tsunami hazard is displayed by 5-, 16-, 50-, 84- and 95-percentile and mean hazard curves. The result of PTHA will be used for quantitative assessment of the tsunami risk for important facilities located on coastal area. Tsunami hazard curves are the reasonable input data for structures and system analysis. However the evaluation method for estimating fragility of structures and the procedure of system analysis is now being developed. (authors)

Low Wages as Occupational Health Hazards.

Science.gov (United States)

Leigh, J Paul; De Vogli, Roberto

2016-05-01

The history of occupational medicine has been characterized by ever-widening recognition of hazards, from fires in 1911 to asbestos in the 1960s, to job strain in the 1990s. In this essay, we argue for broadening the recognition further to include low wages. We first review possible mechanisms explaining the effects of wages on health or health behaviors. Mechanisms involve self-esteem, job satisfaction, deprivation, social rank, the "full" price of bad health, patience, and the ability to purchase health-producing goods and services. Second, we discuss empirical studies that rely on large, typically national, data sets and statistical models that use either instrumental variables or natural experiments and also account for other family income. Finally, we draw implications for laws governing minimum wages and labor unions.

[Critical aspects of the management of "hazardous" health care workers. Consensus document].

Science.gov (United States)

Magnavita, N; Cicerone, Marina; Cirese, Vania; De Lorenzo, G; Di Giannantonios, M; Fileni, A; Goggiamani, Angela; Magnavita, Giulia; Marchi, Edda; Mazzullo, D; Monami, F; Monami, S; Puro, V; Ranalletta, Dalila; Ricciardi, G; Sacco, A; Spagnolo, A; Spagnolo, A G; Squarcione, S; Zavota, Giovanna

2006-01-01

A worker is considered to be hazardous to others when, in the course of performing a specific work task, his/her health problems (e.g., substance dependence, emotional disorders, physical disability, transmissible diseases) pose a risk for other workers' or the public's health and safety, or begins to interfere with ability to function in profession life. The presence of certain illnesses or the fact that a health care worker is impaired because of them do not necessarily imply that he, or she, is hazardous for others. Working in health care increases the probability that an impaired worker being hazardous for others. Management of hazardous workers requires new techniques and procedures, and specific policies. An interdisciplinary group of experts from medical, bioethical, legal and administrative disciplines, together with trade union and employers' representatives, is currently attempting to define a way to put prevention measures into practice in accordance with state laws and individual rights. A consensus document is presented, covering critical aspects such as: social responsibility of the employer, risk management, informed consent, non compliance, confidentiality, responsibility of workers, disclosure of risk to patients, non-discrimination, counselling and recovery of impaired workers, effectiveness of international guidelines. Occupational health professionals are obliged to adhere to ethical principles in the management of "hazardous" workers; the assessment of ethical costs and benefits for the stakeholders is the basis for appropriate decisions.

Modern environmental health hazards: a public health issue of increasing significance in Africa.

Science.gov (United States)

Nweke, Onyemaechi C; Sanders, William H

2009-06-01

Traditional hazards such as poor sanitation currently account for most of Africa's environmentally related disease burden. However, with rapid development absent appropriate safeguards for environment and health, modern environmental health hazards (MEHHs) may emerge as critical contributors to the continent's disease burden. We review recent evidence of human exposure to and health effects from MEHHs, and their occurrence in environmental media and consumer products. Our purpose is to highlight the growing significance of these hazards as African countries experience urbanization, industrial growth, and development. We reviewed published epidemiologic, exposure, and environmental studies of chemical agents such as heavy metals and pesticides. The body of evidence demonstrates ongoing environmental releases of MEHHs and human exposures sometimes at toxicologically relevant levels. Several sources of MEHHs in environmental media have been identified, including natural resource mining and processing and automobile exhaust. Biomonitoring studies provided direct evidence of human exposure to metals such as mercury and lead and pesticides such as p,p'-dichlorodiphenyltrichloroethane (DDT) and organophosphates. Land and water resource pollution and industrial air toxics are areas of significant data gaps, notwithstanding the presence of several emitting sources. Unmitigated MEHH releases and human exposure have implications for Africa's disease burden. For Africans encumbered by conditions such as malnutrition that impair resilience to toxicologic challenges, the burden may be higher. A shift in public health policy toward accommodating the emerging diversity in Africa's environmental health issues is necessary to successfully alleviate the burden of avoidable ill health and premature death for all its communities now and in the future.

Computer use and health hazard: perceptions from Nigeria's ...

African Journals Online (AJOL)

Computer use and health hazard: perceptions from Nigeria's Premier University. ... the combination of headache, vision and ergonomic related problems. ... and pains and Repetitive Strain Injury (RSI) and Carpal Tunnel Syndrome (CTS) as ...

Which moral hazard? Health care reform under the Affordable Care Act of 2010.

Science.gov (United States)

Mendoza, Roger Lee

2016-06-20

Purpose - Moral hazard is a concept that is central to risk and insurance management. It refers to change in economic behavior when individuals are protected or insured against certain risks and losses whose costs are borne by another party. It asserts that the presence of an insurance contract increases the probability of a claim and the size of a claim. Through the US Affordable Care Act (ACA) of 2010, this study seeks to examine the validity and relevance of moral hazard in health care reform and determine how welfare losses or inefficiencies could be mitigated. Design/methodology/approach - This study is divided into three sections. The first contrasts conventional moral hazard from an emerging or alternative theory. The second analyzes moral hazard in terms of the evolution, organization, management, and marketing of health insurance in the USA. The third explains why and how salient reform measures under the ACA might induce health care consumption and production in ways that could either promote or restrict personal health and safety as well as social welfare maximization. Findings - Insurance generally induces health care (over) consumption. However, not every additional consumption, with or without adverse selection, can be considered wasteful or risky, even if it might cost insurers more in the short run. Moral hazard can generate welfare and equity gains. These gains might vary depending on which ACA provisions, insured population, covered illnesses, treatments, and services, as well as health outcomes are taken into account, and because of the relative ambiguities surrounding definitions of "health." Actuarial risk models can nonetheless benefit from incorporating welfare and equity gains into their basic assumptions and estimations. Originality/value - This is the first study which examines the ACA in the context of the new or alternative theory of moral hazard. It suggests that containing inefficient moral hazard, and encouraging its desirable

Analysis on the Industrial Design of Food Package and the Component of Hazardous Substance in the Packaging Material

OpenAIRE

Wei-Wen Huang

2015-01-01

Transferring the hazardous chemicals contained in food packaging materials into food would threaten the health of consumers, therefore, the related laws and regulations and the detection method of hazardous substance have been established at home and abroad to ensure the safety to use the food packaging material. According to the analysis on the hazardous component in the food packaging, a set of detection methods for hazardous substance in the food packaging was established in the paper and ...

Occupational health hazards among quarry employees in Ebonyi ...

African Journals Online (AJOL)

Occupational health hazards among quarry employees in Ebonyi state, ... how these problems affect the conditions of employees in such industries in Ebonyi State. ... the level of compliance of safety and protective devices among employees.

Assessing the impact of hazardous waste on children's health: The exposome paradigm.

Science.gov (United States)

Sarigiannis, D A

2017-10-01

Assessment of the health impacts related to hazardous waste is a major scientific challenge with multiple societal implications. Most studies related to associations between hazardous waste and public health do not provide established of mechanistic links between environmental exposure and disease burden, resulting in ineffective waste management options. The exposome concept comes to overhaul the nature vs. nurture paradigm and embraces a world of dynamic interactions between environmental exposures, endogenous exposures and genetic expression in humans. In this context, the exposome paradigm provides a novel tool for holistic hazardous waste management. Waste streams and the related contamination of environmental media are not viewed in isolation, but rather as components of the expotype, the vector of exposures an individual is exposed to over time. Thus, a multi-route and multi-pathway exposure estimation can be performed setting a realistic basis for integrated health risk assessment. Waste management practices are thus assessed not only regarding their technological edge and efficacy but also their effects on human health at the individual and community level, considering intra-subject variability in the affected population. The effectiveness of the exposome approach is demonstrated in the case of Athens, the capital of Greece, where the health effects associated to long term and short term exposure to two major waste management facilities (landfill and plastic recycling) are presented. Using the exposome analysis tools, we confirmed that proximity to a landfill is critical for children neurodevelopment. However, this effect is significantly modified by parameters such as parental education level, socioeconomic status and nutrition. Proximity to a plastics recycling plant does not pose significant threats under normal operating conditions; yet, in the case of an accidental fire, release of persistent carcinogenic compounds (dioxins and furans) even for a

Uncertainty Analysis and Expert Judgment in Seismic Hazard Analysis

Science.gov (United States)

Klügel, Jens-Uwe

2011-01-01

The large uncertainty associated with the prediction of future earthquakes is usually regarded as the main reason for increased hazard estimates which have resulted from some recent large scale probabilistic seismic hazard analysis studies (e.g. the PEGASOS study in Switzerland and the Yucca Mountain study in the USA). It is frequently overlooked that such increased hazard estimates are characteristic for a single specific method of probabilistic seismic hazard analysis (PSHA): the traditional (Cornell-McGuire) PSHA method which has found its highest level of sophistication in the SSHAC probability method. Based on a review of the SSHAC probability model and its application in the PEGASOS project, it is shown that the surprising results of recent PSHA studies can be explained to a large extent by the uncertainty model used in traditional PSHA, which deviates from the state of the art in mathematics and risk analysis. This uncertainty model, the Ang-Tang uncertainty model, mixes concepts of decision theory with probabilistic hazard assessment methods leading to an overestimation of uncertainty in comparison to empirical evidence. Although expert knowledge can be a valuable source of scientific information, its incorporation into the SSHAC probability method does not resolve the issue of inflating uncertainties in PSHA results. Other, more data driven, PSHA approaches in use in some European countries are less vulnerable to this effect. The most valuable alternative to traditional PSHA is the direct probabilistic scenario-based approach, which is closely linked with emerging neo-deterministic methods based on waveform modelling.

Earthquake Hazard Analysis Methods: A Review

Science.gov (United States)

Sari, A. M.; Fakhrurrozi, A.

2018-02-01

One of natural disasters that have significantly impacted on risks and damage is an earthquake. World countries such as China, Japan, and Indonesia are countries located on the active movement of continental plates with more frequent earthquake occurrence compared to other countries. Several methods of earthquake hazard analysis have been done, for example by analyzing seismic zone and earthquake hazard micro-zonation, by using Neo-Deterministic Seismic Hazard Analysis (N-DSHA) method, and by using Remote Sensing. In its application, it is necessary to review the effectiveness of each technique in advance. Considering the efficiency of time and the accuracy of data, remote sensing is used as a reference to the assess earthquake hazard accurately and quickly as it only takes a limited time required in the right decision-making shortly after the disaster. Exposed areas and possibly vulnerable areas due to earthquake hazards can be easily analyzed using remote sensing. Technological developments in remote sensing such as GeoEye-1 provide added value and excellence in the use of remote sensing as one of the methods in the assessment of earthquake risk and damage. Furthermore, the use of this technique is expected to be considered in designing policies for disaster management in particular and can reduce the risk of natural disasters such as earthquakes in Indonesia.

Diesel particles - a health hazard

Energy Technology Data Exchange (ETDEWEB)

Ege, C.

2004-08-15

To all appearances, small particles belong to the pollutants presenting the biggest health hazards. Particles come especially from diesel-powered vehicles. According to researchers, particles cause thousands of early deaths each year in the big cities in Denmark alone, and up to 1,250 of these deaths could be prevented by fitting particle filters on diesel-powered vehicles. That is more than deaths caused by traffic accidents. Especially the elderly are affected. In addition, the small particles seem to aggravate asthma incidences, including the many children with asthma. What makes the small particles so very dangerous is that they can enter the smallest of vessels of the lungs. There is a solution within sight to this grave health hazard. The solution is called particle filters, but they will not come automatically. It requires initiatives in the form of legislation, green taxes and subsidies. The EU is introducing stricter regulations regarding particle emission from heavy vehicles from 2006, though only for new vehicles. It will therefore take many years to abate the problem this way. In the present pamphlet, the Danish Ecological Council offers a number of specific proposals on how to further the introduction of filters on diesel vehicles. The Danish government has taken a small step in the right direction by establishing a subsidy scheme for particle filters. Yet the amount allocated is too small and, because it is not followed up by setting taxes on polluting vehicles, it will have little effect. (au)

Implementation of health and safety management system to reduce hazardous potential in PT.XYZ Indonesia

Science.gov (United States)

Widodo, L.; Adianto; Sartika, D. I.

2017-12-01

PT. XYZ is a large automotive manufacturing company that manufacture, assemble as well as a car exporter. The other products are spare parts, jig and dies. PT. XYZ has long been implementing the Occupational Safety and Health Management System (OSHMS) to reduce the potential hazards that cause work accidents. However, this does not mean that OSHMS that has been implemented does not need to be upgraded and improved. This is due to the potential danger caused by work is quite high. This research was conducted in Sunter 2 Plant where its production activities have a high level of potential hazard. Based on Hazard Identification risk assessment, Risk Assessment, and Risk Control (HIRARC) found 10 potential hazards in Plant Stamping Production, consisting of 4 very high risk potential hazards (E), 5 high risk potential hazards (H), and 1 moderate risk potential hazard (M). While in Plant Casting Production found 22 potential hazards findings consist of 7 very high risk potential hazards (E), 12 high risk potential hazards (H), and 3 medium risk potential hazards (M). Based on the result of Fault Tree Analysis (FTA), the main priority is the high risk potential hazards (H) and very high risk potential hazards (E). The proposed improvement are to make the visual display of the importance of always using the correct Personal Protective Equipment (PPE), establishing good working procedures, conducting OSH training for workers on a regular basis, and continuing to conduct safety campaigns.

Health and Safety Procedures Manual for hazardous waste sites

Energy Technology Data Exchange (ETDEWEB)

Thate, J.E.

1992-09-01

The Oak Ridge National Laboratory Chemical Assessments Team (ORNL/CAT) has developed this Health and Safety Procedures Manual for the guidance, instruction, and protection of ORNL/CAT personnel expected to be involved in hazardous waste site assessments and remedial actions. This manual addresses general and site-specific concerns for protecting personnel, the general public, and the environment from any possible hazardous exposures. The components of this manual include: medical surveillance, guidance for determination and monitoring of hazards, personnel and training requirements, protective clothing and equipment requirements, procedures for controlling work functions, procedures for handling emergency response situations, decontamination procedures for personnel and equipment, associated legal requirements, and safe drilling practices.

Safety, health and environmental committee (JKSHE): Establishing chemical hazard management

International Nuclear Information System (INIS)

Shyen, A.K.S.; Noriah Mod Ali; Sangau, J.K.

2012-01-01

Most of the laboratories in Malaysian Nuclear Agency are using chemicals in their research activities. However, it is known that using of chemicals without proper knowledge especially on the material characteristics as well as safe handling procedure may cause great harm to the workers. Therefore, Safety, Health and Environmental Committee (JKSHE) sees the need to establish a good chemical hazard management to ensure that a safe and healthy workplace and environment is provided. One of the elements in chemical hazard management is to carry out Chemical Hazard Risk Assessment (CHRA). The assessment was done so that decision can be made on suitable control measures upon use of such chemicals, such as induction and training courses to be given to the workers and health surveillance activities that may be needed to protect the workers. For this, JKSHE has recommended to conduct CHRA for one of the laboratories at Secondary Standard Dosimetry Laboratory (SSDL) namely Film Dosimeter Processing Room (dark room) as the initial effort towards a better chemical hazard management. This paper presents the case study where CHRA was conducted to identify the chemical hazards at the selected laboratory, the adequacy of existing control measures and finally the recommendation for more effective control measures. (author)

Frequency Analysis of Aircraft hazards for License Application

International Nuclear Information System (INIS)

K. Ashley

2006-01-01

The preclosure safety analysis for the monitored geologic repository at Yucca Mountain must consider the hazard that aircraft may pose to surface structures. Relevant surface structures are located beneath the restricted airspace of the Nevada Test Site (NTS) on the eastern slope of Yucca Mountain, near the North Portal of the Exploratory Studies Facility Tunnel (Figure 1). The North Portal is located several miles from the Nevada Test and Training Range (NTTR), which is used extensively by the U.S. Air Force (USAF) for training and test flights (Figure 1). The NTS airspace, which is controlled by the U.S. Department of Energy (DOE) for NTS activities, is not part of the NTTR. Agreements with the DOE allow USAF aircraft specific use of the airspace above the NTS (Reference 2.1.1 [DIRS 103472], Section 3.1.1 and Appendix A, Section 2.1; and Reference 2.1.2 [DIRS 157987], Sections 1.26 through 1.29). Commercial, military, and general aviation aircraft fly within several miles to the southwest of the repository site in the Beatty Corridor, which is a broad air corridor that runs approximately parallel to U.S. Highway 95 and the Nevada-California border (Figure 2). These aircraft and other aircraft operations are identified and described in ''Identification of Aircraft Hazards'' (Reference 2.1.3, Sections 6 and 8). The purpose of this analysis is to estimate crash frequencies for aircraft hazards identified for detailed analysis in ''Identification of Aircraft Hazards'' (Reference 2.1.3, Section 8). Reference 2.1.3, Section 8, also identifies a potential hazard associated with electronic jamming, which will be addressed in this analysis. This analysis will address only the repository and not the transportation routes to the site. The analysis is intended to provide the basis for: (1) Categorizing event sequences related to aircraft hazards; (2) Identifying design or operational requirements related to aircraft hazards

Frequency Analysis of Aircraft hazards for License Application

Energy Technology Data Exchange (ETDEWEB)

K. Ashley

2006-10-24

The preclosure safety analysis for the monitored geologic repository at Yucca Mountain must consider the hazard that aircraft may pose to surface structures. Relevant surface structures are located beneath the restricted airspace of the Nevada Test Site (NTS) on the eastern slope of Yucca Mountain, near the North Portal of the Exploratory Studies Facility Tunnel (Figure 1). The North Portal is located several miles from the Nevada Test and Training Range (NTTR), which is used extensively by the U.S. Air Force (USAF) for training and test flights (Figure 1). The NTS airspace, which is controlled by the U.S. Department of Energy (DOE) for NTS activities, is not part of the NTTR. Agreements with the DOE allow USAF aircraft specific use of the airspace above the NTS (Reference 2.1.1 [DIRS 103472], Section 3.1.1 and Appendix A, Section 2.1; and Reference 2.1.2 [DIRS 157987], Sections 1.26 through 1.29). Commercial, military, and general aviation aircraft fly within several miles to the southwest of the repository site in the Beatty Corridor, which is a broad air corridor that runs approximately parallel to U.S. Highway 95 and the Nevada-California border (Figure 2). These aircraft and other aircraft operations are identified and described in ''Identification of Aircraft Hazards'' (Reference 2.1.3, Sections 6 and 8). The purpose of this analysis is to estimate crash frequencies for aircraft hazards identified for detailed analysis in ''Identification of Aircraft Hazards'' (Reference 2.1.3, Section 8). Reference 2.1.3, Section 8, also identifies a potential hazard associated with electronic jamming, which will be addressed in this analysis. This analysis will address only the repository and not the transportation routes to the site. The analysis is intended to provide the basis for: (1) Categorizing event sequences related to aircraft hazards; (2) Identifying design or operational requirements related to aircraft hazards.

The use of hazards analysis in the development of training

Energy Technology Data Exchange (ETDEWEB)

Houghton, F.K.

1998-03-01

When training for a job in which human error has the potential of producing catastrophic results, an understanding of the hazards that may be encountered is of paramount importance. In high consequence activities, it is important that the training program be conducted in a safe environment and yet emphasize the potential hazards. Because of the high consequence of a human error the use of a high-fidelity simulation is of great importance to provide the safe environment the worker needs to learn and hone required skills. A hazards analysis identifies the operation hazards, potential human error, and associated positive measures that aid in the mitigation or prevention of the hazard. The information gained from the hazards analysis should be used in the development of training. This paper will discuss the integration of information from the hazards analysis into the development of simulation components of a training program.

Development of seismic hazard analysis in Japan

International Nuclear Information System (INIS)

Itoh, T.; Ishii, K.; Ishikawa, Y.; Okumura, T.

1987-01-01

In recent years, seismic risk assessment of the nuclear power plant have been conducted increasingly in various countries, particularly in the United States to evaluate probabilistically the safety of existing plants under earthquake loading. The first step of the seismic risk assessment is the seismic hazard analysis, in which the relationship between the maximum earthquake ground motions at the plant site and their annual probability of exceedance, i.e. the seismic hazard curve, is estimated. In this paper, seismic hazard curves are evaluated and examined based on historical earthquake records model, in which seismic sources are modeled with area-sources, for several different sites in Japan. A new evaluation method is also proposed to compute the response spectra of the earthquake ground motions in connection with estimating the probabilistic structural response. Finally the numerical result of probabilistic risk assessment for a base-isolated three story RC structure, in which the frequency of seismic induced structural failure is evaluated combining the seismic hazard analysis, is described briefly

Beryllium. Health hazards and their control. Pt. 2

International Nuclear Information System (INIS)

Lires, O.A.; Delfino, C.A.; Botbol, J.

1991-01-01

In this work (continuation of 'Beryllium' series) health hazards, toxic effects, limits of permissible atmospheric contamination and safe exposure to beryllium are described. Guidelines to the design, control operations and hygienic precautions of the working facilities are given. (Author) [es

Preliminary Hazards Analysis Plasma Hearth Process

International Nuclear Information System (INIS)

Aycock, M.; Coordes, D.; Russell, J.; TenBrook, W.; Yimbo, P.

1993-11-01

This Preliminary Hazards Analysis (PHA) for the Plasma Hearth Process (PHP) follows the requirements of United States Department of Energy (DOE) Order 5480.23 (DOE, 1992a), DOE Order 5480.21 (DOE, 1991d), DOE Order 5480.22 (DOE, 1992c), DOE Order 5481.1B (DOE, 1986), and the guidance provided in DOE Standards DOE-STD-1027-92 (DOE, 1992b). Consideration is given to ft proposed regulations published as 10 CFR 830 (DOE, 1993) and DOE Safety Guide SG 830.110 (DOE, 1992b). The purpose of performing a PRA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PRA then is followed by a Preliminary Safety Analysis Report (PSAR) performed during Title I and II design. This PSAR then leads to performance of the Final Safety Analysis Report performed during construction, testing, and acceptance and completed before routine operation. Radiological assessments indicate that a PHP facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous material assessments indicate that a PHP facility will be a Low Hazard facility having no significant impacts either onsite or offsite to personnel and the environment

Final Hazard Classification and Auditable Safety Analysis for the N Basin Segment

International Nuclear Information System (INIS)

Kloster, G.L.

1998-08-01

The purposes of this report are to serve as the auditable safety analysis (ASA) for the N Basin Segment, during surveillance and maintenance preceding decontamination and decommissioning; to determine and document the final hazard classification (FHC) for the N Basin Segment. The result of the ASA evaluation are: based on hazard analyses and the evaluation of accidents, no activity could credibly result in an unacceptable exposure to an individual; controls are identified that serve to protect worker health and safety. The results of the FHC evaluation are: potential exposure is much below 10 rem (0.46 rem), and the FHC for the N Basin Segment is Radiological

Risk Assessment of Physical Health Hazards in Al-Azhar University Hospital in New Damietta, Egypt

OpenAIRE

Mohammed El-Hady Imam*, Raed Mohammed Alazab**,

2013-01-01

Introduction: Personnel working in hospitals are exposed to many occupational hazards that may threaten their health and safety. Physical hazards that are encountered in hospital working environment include temperature, illumination, noise, electrical injuries, and radiation. Objectives: The objectives of this study were to identify physical health hazards in all departments of Al-Azhar University Hospital in new Damietta, to measure risk level of these hazards, and to recognize safety me...

Hazard analysis in uranium hexafluoride production facility

International Nuclear Information System (INIS)

Marin, Maristhela Passoni de Araujo

1999-01-01

The present work provides a method for preliminary hazard analysis of nuclear fuel cycle facilities. The proposed method identify both chemical and radiological hazards, as well as the consequences associated with accident scenarios. To illustrate the application of the method, a uranium hexafluoride production facility was selected. The main hazards are identified and the potential consequences are quantified. It was found that, although the facility handles radioactive material, the main hazards as associated with releases of toxic chemical substances such as hydrogen fluoride, anhydrous ammonia and nitric acid. It was shown that a contention bung can effectively reduce the consequences of atmospheric release of toxic materials. (author)

Climatic change and health. Which problems are caused by thermophile hazardous organisms? Final report. Environment and health: climatic change; Klimawandel und Gesundheit. Welche Probleme verursachen Waerme liebende Schadorganismen? Abschlussbericht. Umwelt and Gesundheit: Klimawandel

Energy Technology Data Exchange (ETDEWEB)

Augustin, Jobst; Muecke, Hans-Guido (comps.)

2010-03-15

Climatic changes can cause health hazards due to thermophile harmful organisms, especially those with increased allergic potentials. The meeting covered the following topics: climatic change induced health hazards and the German adaptation strategies; the complex relation between climatic change and allergies; ambrosia propagation in Germany - hazards for health and biodiversity; climatic change induced reaction of hygienically precarious organism in urban regions; monitoring and abatement of Thaumetopoea processionea in Bavarian woods; climatic change and pollen flight dynamics; Thaumetopoea processionea as cause for non-distinctive respiratory systems diseases; risk and protection factors for the development of asthma and allergies during infancy; abatement of pathogenic or invasive harmful organisms in Switzerland; health hazards in connection with Thaumetopoea processionea - examples from Bavaria; retrospective analysis of EPS diseases during 2004 and 2005 in the region Kleve.

Health hazards to children in agriculture.

Science.gov (United States)

Wilk, V A

1993-09-01

Children comprise a significant portion of the agricultural workforce and are exposed to many workplace hazards, including farm machinery, pesticides, poor field sanitation, unsafe transportation, and fatigue from doing physically demanding work for long periods. Migrant farmworker children face the additional hazard of substandard or nonexistent housing in the fields. Children account for a disproportionate share of agricultural workplace fatalities and disabling injuries, with more than 300 deaths and 27,000 injuries per year. The most common cause of fatal and nonfatal injury among children in agriculture is farm machinery, with tractors accounting for the greatest number. Remedies to the problems of child labor must take into account family economics and the need for child care. Labor law reform and rigorous enforcement of existing laws and of workplace health and safety requirements are vital to better protect the children and adults working in agriculture.

Hazard Identification and Risk Assessment in Water Treatment Plant considering Environmental Health and Safety Practice

Directory of Open Access Journals (Sweden)

Falakh Fajrul

2018-01-01

Full Text Available Water Treatment Plant (WTP is an important infrastructure to ensure human health and the environment. In its development, aspects of environmental safety and health are of concern. This paper case study was conducted at the Water Treatment Plant Company in Semarang, Central Java, Indonesia. Hazard identification and risk assessment is one part of the occupational safety and health program at the risk management stage. The purpose of this study was to identify potential hazards using hazard identification methods and risk assessment methods. Risk assessment is done using criteria of severity and probability of accident. The results obtained from this risk assessment are 22 potential hazards present in the water purification process. Extreme categories that exist in the risk assessment are leakage of chlorine and industrial fires. Chlorine and fire leakage gets the highest value because its impact threatens many things, such as industrial disasters that could endanger human life and the environment. Control measures undertaken to avoid potential hazards are to apply the use of personal protective equipment, but management will also be better managed in accordance with hazard control hazards, occupational safety and health programs such as issuing work permits, emergency response training is required, Very useful in overcoming potential hazards that have been determined.

Hazard Identification and Risk Assessment in Water Treatment Plant considering Environmental Health and Safety Practice

Science.gov (United States)

Falakh, Fajrul; Setiani, Onny

2018-02-01

Water Treatment Plant (WTP) is an important infrastructure to ensure human health and the environment. In its development, aspects of environmental safety and health are of concern. This paper case study was conducted at the Water Treatment Plant Company in Semarang, Central Java, Indonesia. Hazard identification and risk assessment is one part of the occupational safety and health program at the risk management stage. The purpose of this study was to identify potential hazards using hazard identification methods and risk assessment methods. Risk assessment is done using criteria of severity and probability of accident. The results obtained from this risk assessment are 22 potential hazards present in the water purification process. Extreme categories that exist in the risk assessment are leakage of chlorine and industrial fires. Chlorine and fire leakage gets the highest value because its impact threatens many things, such as industrial disasters that could endanger human life and the environment. Control measures undertaken to avoid potential hazards are to apply the use of personal protective equipment, but management will also be better managed in accordance with hazard control hazards, occupational safety and health programs such as issuing work permits, emergency response training is required, Very useful in overcoming potential hazards that have been determined.

Multi-hazard risk analysis for management strategies

Science.gov (United States)

Kappes, M.; Keiler, M.; Bell, R.; Glade, T.

2009-04-01

Risk management is very often operating in a reactive way, responding to an event, instead of proactive starting with risk analysis and building up the whole process of risk evaluation, prevention, event management and regeneration. Since damage and losses from natural hazards raise continuously more and more studies, concepts (e.g. Switzerland or South Tyrol-Bolozano) and software packages (e.g. ARMAGEDOM, HAZUS or RiskScape) are developed to guide, standardize and facilitate the risk analysis. But these approaches focus on different aspects and are mostly closely adapted to the situation (legislation, organization of the administration, specific processes etc.) of the specific country or region. We propose in this study the development of a flexible methodology for multi-hazard risk analysis, identifying the stakeholders and their needs, processes and their characteristics, modeling approaches as well as incoherencies occurring by combining all these different aspects. Based on this concept a flexible software package will be established consisting of ArcGIS as central base and being complemented by various modules for hazard modeling, vulnerability assessment and risk calculation. Not all modules will be developed newly but taken from the current state-of-the-art and connected or integrated into ArcGIS. For this purpose two study sites, Valtellina in Italy and Bacelonnette in France, were chosen and the hazards types debris flows, rockfalls, landslides, avalanches and floods are planned to be included in the tool for a regional multi-hazard risk analysis. Since the central idea of this tool is its flexibility this will only be a first step, in the future further processes and scales can be included and the instrument thus adapted to any study site.

Experiences of frontline nursing staff on workplace safety and occupational health hazards in two psychiatric hospitals in Ghana.

Science.gov (United States)

Alhassan, Robert Kaba; Poku, Kwabena Adu

2018-06-06

Psychiatric hospitals need safe working environments to promote productivity at the workplace. Even though occupational health and safety is not completely new to the corporate society, its scope is largely limited to the manufacturing/processing industries which are perceived to pose greater dangers to workers than the health sector. This paper sought to explore the experiences of frontline nursing personnel on the occupational health and safety conditions in two psychiatric hospitals in Ghana. This is an exploratory cross-sectional study among 296 nurses and nurse-assistants in Accra (n = 164) and Pantang (n = 132) psychiatric hospitals using the proportional stratified random sampling technique. Multivariate Ordinary Least Squares (OLS) regression test was conducted to ascertain the determinants of staff exposure to occupational health hazards and the frequency of exposure to these occupational health hazards on daily basis. Knowledge levels on occupational health hazards was high in Accra and Pantang psychiatric hospitals (i.e. 92 and 81% respectively), but barely 44% of the 296 interviewed staff in the two hospitals said they reported their most recent exposure to an occupational health hazard to hospital management. It was found that staff who worked for more years on the ward had higher likelihood of exposure to occupational health hazards than those who worked for lesser years (p = 0.002). The category of occupational health hazards reported most were the physical health hazards. Psychosocial hazards were the least reported health hazards. Frequency of exposure to occupational health hazards on daily basis was positively associated with work schedules of staff particularly, staff on routine day schedule (Coef = 4.49, p = 0.011) and those who alternated between day and night schedules (Coef = 4.48, p = 0.010). Occupational health and safety conditions in the two hospitals were found to be generally poor. Even though majority of

Worrying about terrorism and other acute environmental health hazard events.

Science.gov (United States)

Greenberg, Michael; Babcock-Dunning, Lauren

2012-04-01

To better understand why some people worry more about terrorism compared with others, we measured how much US residents worried about a terrorist event in their area and examined the association of their fears with their concerns about acute and chronic hazards and other correlates. In 2008 (n = 600) and 2010 (n = 651), we performed a random-digit dialing national landline telephone survey. We asked about worries about terrorism and 5 other environmental health hazard issues. We also collected demographic and socioeconomic data. Only 15% worried "a great deal" about a terrorist event in their area and 18% to 33% were greatly concerned about other environmental issues. Fear about acute hazard events was a stronger predictor of a great deal of concern about terrorism than were age, race/ethnicity, gender, educational achievement, and other correlates. Those who worried most about acute environmental health hazard events were most likely to worry about terrorism. Also, those who were older, poorer, Blacks, or Latinos, or who lived in populous urban areas felt they were most vulnerable to terrorist attacks. We recommend methods to involve US citizens as part of disaster planning.

Fire hazards analysis for solid waste burial grounds

International Nuclear Information System (INIS)

McDonald, K.M.

1995-01-01

This document comprises the fire hazards analysis for the solid waste burial grounds, including TRU trenches, low-level burial grounds, radioactive mixed waste trenches, etc. It analyzes fire potential, and fire damage potential for these facilities. Fire scenarios may be utilized in future safety analysis work, or for increasing the understanding of where hazards may exist in the present operation

Possible health hazards of nuclear power

International Nuclear Information System (INIS)

Kneale, G.W.

1981-01-01

In considering the possible health hazards of nuclear power, evidence is examined that official estimates of risks, on which governments may be supposed to base their decisions as to the acceptibility of a nuclear power programme, may be understated. In particular the case that the Hanford survey is more appropriate as a basis of risk estimation than the survey of the survivors of the atomic bombs dropped on Japan, The Atomic Bomb Casualty Commission Study, is discussed. (U.K.)

International trade agreements: hazards to health?

Science.gov (United States)

Shaffer, Ellen R; Brenner, Joseph E

2004-01-01

Since the 1980s, neoliberal policies have prescribed reducing the role of governments, relying on market forces to organize and provide health care and other vital human services. In this context, international trade agreements increasingly serve as mechanisms to enforce the privatization, deregulation, and decentralization of health care and other services, with important implications for democracy as well as for health. Critics contend that social austerity and "free" trade agreements contribute to the rise in global poverty and economic inequality and instability, and therefore to increased preventable illness and death. Under new agreements through the World Trade Organization that cover vital human services such as health care, water, education, and energy, unaccountable, secret trade tribunals could overrule decisions by democratically elected officials on public financing for national health care systems, licensing and training standards for health professionals, patient safety and quality regulations, occupational safety and health, control of hazardous substances such as tobacco and alcohol, the environment, and affordable access to safe water and sanitation. International negotiations in 2003 in Cancun and in Miami suggested that countervailing views are developing momentum. A concerned health care community has begun to call for a moratorium on trade negotiations on health care and water, and to reinvigorate an alternative vision of universal access to vital services.

Chemical health risk assessment for hazardous and mixed waste management units at Lawrence Livermore National Laboratory

International Nuclear Information System (INIS)

1992-09-01

The Lawrence Livermore National Laboratory (LLNL) operates three Hazardous Waste Management Facilities with 24 associated waste management units for the treatment and storage of hazardous and mixed wastes. These wastes are generated by research programs and support operations. The storage and treatment units are presently operated under interim status in accordance with the requirements of the US Envirorunental Protection Agency (US EPA) and the Department of Toxic Substances Control (DTSC), a division of the California Envirorunental Protection Agency (Cal/EPA). As required by the California Hazardous Waste Control Act and the Resource Conservation and Recovery Act (RCRA), LLNL ha s applied for a Part B permit to continue operating the storage and waste treatment facilities. As part of this permitting process, LLNL is required to conduct a health risk assessment (HRA) to examine the potential health impacts to the surrounding community from continued storage and treatment of hazardous and mixed wastes. analysis document presents the results of this risk assessment. An analysis of maximum credible chemical accidents is also included in Section 7.0. This HRA was prepared in accordance with procedures set forth by the California Air Pollution Control Officers Association (CAPCOA) ''Air Toxics Assessment Manual,'' CAPCOA guidelines for preparing risk assessments under the Air Toxic ''Hot Spots'' Act (AB 2588) and requirements of the US EPA. By following these procedures, this risk assessment presents a conservative analysis of a hypothetical Maximally Exposed Individual (MEI) using many worst-case assumptions that will not apply to an actual individual. As such, the risk estimates presented should be regarded as a worst-case estimate of any actual risk that may be present

Severe scratcher-reaction: an unknown health hazard?

Directory of Open Access Journals (Sweden)

Carsten Sauer Mikkelsen

2015-03-01

Full Text Available Tattoos are well known to cause skin problems and the number of reported adverse reactions after tattooing has increased. Illegally imported tattoo ink is unrestrained and can contain unknown ingredients and contamination thereby posing a serious health hazard. We present a case illustrating the risk of pronounced phototoxic allergic reaction and other severe complications after using home kit tattoo ink.

A critical analysis of hazard resilience measures within sustainability assessment frameworks

International Nuclear Information System (INIS)

Matthews, Elizabeth C.; Sattler, Meredith; Friedland, Carol J.

2014-01-01

Today, numerous sustainability assessment frameworks (SAFs) exist to guide designers in achieving sustainable performance in the design of structures and communities. SAFs are beneficial in educating users and are useful tools for incorporating sustainability strategies into planning, design, and construction; however, there is currently a substantial gap in the ability of existing SAFs to incorporate hazard resistance and hazard mitigation in the broader context of sustainable design. This paper analyzes the incorporation of hazard resistant design and hazard mitigation strategies within SAFs via a multi-level analysis of eleven SAFs. The SAFs analyzed range in scale of application (i.e. building, site, community). Three levels of analysis are presented: (1) macro-level analysis comparing the number of measures strictly addressing resilience versus sustainability, (2) meso-level analysis of the coverage of types of hazards within SAFs (e.g. flood, fire), and (3) micro-level analysis of SAF measures connected to flood-related hazard resilience. The results demonstrate that hazard resistance and hazard mitigation do not figure prominently in the intent of SAFs and that weaknesses in resilience coverage exist that have the potential to lead to the design of structures and communities that are still highly vulnerable to the impacts of extreme events. - Highlights: • Sustainability assessment frameworks (SAFs) were analyzed for resilience coverage • Hazard resistance and mitigation do not figure prominently in the intent of SAFs • Approximately 75% of SAFs analyzed address three or fewer hazards • Lack of economic measures within SAFs could impact resilience and sustainability • Resilience measures for flood hazards are not consistently included in SAFs

A critical analysis of hazard resilience measures within sustainability assessment frameworks

Energy Technology Data Exchange (ETDEWEB)

Matthews, Elizabeth C., E-mail: echiso1@lsu.edu [Louisiana State University, Baton Rouge, LA (United States); Sattler, Meredith, E-mail: msattler@lsu.edu [School of Architecture, Louisiana State University, Baton Rouge, LA (United States); Friedland, Carol J., E-mail: friedland@lsu.edu [Bert S. Turner Department of Construction Management, Louisiana State University, Baton Rouge, LA (United States)

2014-11-15

Today, numerous sustainability assessment frameworks (SAFs) exist to guide designers in achieving sustainable performance in the design of structures and communities. SAFs are beneficial in educating users and are useful tools for incorporating sustainability strategies into planning, design, and construction; however, there is currently a substantial gap in the ability of existing SAFs to incorporate hazard resistance and hazard mitigation in the broader context of sustainable design. This paper analyzes the incorporation of hazard resistant design and hazard mitigation strategies within SAFs via a multi-level analysis of eleven SAFs. The SAFs analyzed range in scale of application (i.e. building, site, community). Three levels of analysis are presented: (1) macro-level analysis comparing the number of measures strictly addressing resilience versus sustainability, (2) meso-level analysis of the coverage of types of hazards within SAFs (e.g. flood, fire), and (3) micro-level analysis of SAF measures connected to flood-related hazard resilience. The results demonstrate that hazard resistance and hazard mitigation do not figure prominently in the intent of SAFs and that weaknesses in resilience coverage exist that have the potential to lead to the design of structures and communities that are still highly vulnerable to the impacts of extreme events. - Highlights: • Sustainability assessment frameworks (SAFs) were analyzed for resilience coverage • Hazard resistance and mitigation do not figure prominently in the intent of SAFs • Approximately 75% of SAFs analyzed address three or fewer hazards • Lack of economic measures within SAFs could impact resilience and sustainability • Resilience measures for flood hazards are not consistently included in SAFs.

Health Risk Assessment on Hazardous Ingredients in Household Deodorizing Products

Directory of Open Access Journals (Sweden)

Minjin Lee

2018-04-01

Full Text Available The inhalation of a water aerosol from a humidifier containing disinfectants has led to serious lung injuries in Korea. To promote the safe use of products, the Korean government enacted regulations on the chemicals in various consumer products that could have adverse health effects. Given the concern over the potential health risks associated with the hazardous ingredients in deodorizing consumer products, 17 ingredients were analyzed and assessed according to their health risk on 3 groups by the application type in 47 deodorizing products. The risk assessment study followed a stepwise procedure (e.g., collecting toxicological information, hazard identification/exposure assessment, and screening and detailed assessment for inhalation and dermal routes. The worst-case scenario and maximum concentration determined by the product purpose and application type were used as the screening assessment. In a detailed assessment, the 75th exposure factor values were used to estimate the assumed reasonable exposure to ingredients. The exposed concentrations of seven ingredients were calculated. Due to limitation of toxicity information, butylated hydroxyl toluene for a consumer’s exposure via the dermal route only was conducted for a detailed assessment. This study showed that the assessed ingredients have no health risks at their maximum concentrations in deodorizing products. This approach can be used to establish guidelines for ingredients that may pose inhalation and dermal hazards.

Health Risk Assessment on Hazardous Ingredients in Household Deodorizing Products

Science.gov (United States)

Lee, Minjin; Kim, Joo-Hyon; Lee, Daeyeop; Kim, Jaewoo; Lim, Hyunwoo; Seo, Jungkwan; Park, Young-Kwon

2018-01-01

The inhalation of a water aerosol from a humidifier containing disinfectants has led to serious lung injuries in Korea. To promote the safe use of products, the Korean government enacted regulations on the chemicals in various consumer products that could have adverse health effects. Given the concern over the potential health risks associated with the hazardous ingredients in deodorizing consumer products, 17 ingredients were analyzed and assessed according to their health risk on 3 groups by the application type in 47 deodorizing products. The risk assessment study followed a stepwise procedure (e.g., collecting toxicological information, hazard identification/exposure assessment, and screening and detailed assessment for inhalation and dermal routes). The worst-case scenario and maximum concentration determined by the product purpose and application type were used as the screening assessment. In a detailed assessment, the 75th exposure factor values were used to estimate the assumed reasonable exposure to ingredients. The exposed concentrations of seven ingredients were calculated. Due to limitation of toxicity information, butylated hydroxyl toluene for a consumer’s exposure via the dermal route only was conducted for a detailed assessment. This study showed that the assessed ingredients have no health risks at their maximum concentrations in deodorizing products. This approach can be used to establish guidelines for ingredients that may pose inhalation and dermal hazards. PMID:29652814

Surveillance of Washington OSHA exposure data to identify uncharacterized or emerging occupational health hazards.

Science.gov (United States)

Lofgren, Don J; Reeb-Whitaker, Carolyn K; Adams, Darrin

2010-07-01

Chemical substance exposure data from the Washington State Occupational Safety and Health Administration (OSHA) program were reviewed to determine if inspections conducted as a result of a report of a hazard from a complainant or referent may alert the agency to uncharacterized or emerging health hazards. Exposure and other electronically stored data from 6890 health inspection reports conducted between April 2003 and August 2008 were extracted from agency records. A total of 515 (7%) inspections with one or more personal airborne chemical substance samples were identified for further study. Inspections by report of a hazard and by targeting were compared for the following: number of inspections, number and percentage of inspections with workers exposed to substances above an agency's permissible exposure limit, types of industries inspected, and number and type of chemical substances assessed. Report of a hazard inspections documented work sites with worker overexposure at the same rate as agency targeted inspections (approximately 35% of the time), suggesting that complainants and referents are a credible pool of observers capable of directing the agency to airborne chemical substance hazards. Report of a hazard inspections were associated with significantly broader distribution of industries as well as a greater variety of chemical substance exposures than were targeted inspections. Narrative text that described business type and processes inspected was more useful than NAICS codes alone and critical in identifying processes and industries that may be associated with new hazards. Finally, previously identified emerging hazards were found among the report of a hazard data. These findings indicate that surveillance of OSHA inspection data can be a valid tool to identify uncharacterized and emerging health hazards. Additional research is needed to develop criteria for objective review and prioritization of the data for intervention. Federal OSHA and other state

Adverse selection and moral hazard in health insurance

OpenAIRE

Bien, Franck; Alary, David

2006-01-01

In this paper, we want to characterize the optimal health insurance contract with adverse selection and moral hazard. We assume that policyholders differ by the permanent health status loss and choose an unobservable preventive effort in order to reduce the probability of illness which is ex-ante identical. The difference in illness'after-effect modifies policyholders' preventive actions. By the way, they differ in probabilities of illness leading to a situation close to Rothschild and Stigli...

Research on Value Assessment and Compensation for Health Hazards of Urban Air Pollution-A Case Study of Urumqi

Directory of Open Access Journals (Sweden)

Chen Yu

Full Text Available ABSTRACT With the acceleration of urbanization and industrialization, urban air pollution has become a serious threat to the health of urban residents. In this study, to investigate health hazards caused by air pollution for urban residents, concentrations of main air pollutants and annual coal consumption amounts during the period from 2000 to 2013 were analyzed. Our results showed that economic losses of Urumqi caused by air pollution amounted to 63.155 million yuan in 2013, accounting for 0.2 ‰ of its GDP and 5.7% of public utility expenditures for that year. The compensation mechanism analysis suggested that it is necessary to further improve the health care system and increase corporate environmental taxes. More environmental health protection taxes should be levied on key monitoredenterprises in Urumqi to achieve effective compensations for urban residents affected by air pollution-related health hazards.

Effectiveness of Awareness Package on Occupational Health Hazards among Ragpickers of New Delhi, India.

Science.gov (United States)

Agarwalla, Rashmi; Pathak, Rambha; Singh, Mitasha; Islam, Farzana; Parashar, Mamta

2017-01-01

Ragpickers are informal workers who collect recyclable materials to earn a small wage on daily basis. They work in vulnerable conditions and awareness regarding occupational and environmental hazard is essential for them. To study the effectiveness of awareness program on various occupational health hazards among the ragpickers. This interventional study was conducted from May through October 2016 among the ragpickers living near field practice area of Department of Community Medicine and those living in slum areas around HAHC Hospital, New Delhi, India. The awareness regarding occupational and environmental health hazards was assessed using a pretested and predesigned pro forma. Snowball sampling technique was used to select the ragpickers from the various areas. Health awareness and education package was designed for the ragpickers. The package was delivered by medical officers and health workers. A posttest assessment was done 2 weeks after the awareness activity. Among 150 ragpickers, there was significant improvement in knowledge immediate post training on knowledge of occupational hazard and hygiene. Efforts should be put to develop training materials on occupation and environmental health and injury issue relating to waste management.

Energy Drinks: A New Health Hazard for Adolescents

Science.gov (United States)

Pennington, Nicole; Johnson, Molly; Delaney, Elizabeth; Blankenship, Mary Beth

2010-01-01

A new hazard for adolescents is the negative health effects of energy drink consumption. Adolescents are consuming these types of drinks at an alarming amount and rate. Specific effects that have been reported by adolescents include jitteriness, nervousness, dizziness, the inability to focus, difficulty concentrating, gastrointestinal upset, and…

Hazard classification of environmental restoration activities at the INEL

International Nuclear Information System (INIS)

Peatross, R.G.

1996-04-01

The following documents require that a hazard classification be prepared for all activities for which US Department of Energy (DOE) has assumed environmental, safety, and health responsibility: the DOE Order 5481.1B, Safety Analysis and Review System and DOE Order 5480.23, Nuclear Safety Analysis Reports. A hazard classification defines the level of hazard posed by an operation or activity, assuming an unmitigated release of radioactive and nonradioactive hazardous material. For environmental restoration activities, the release threshold criteria presented in Hazard Baseline Documentation (DOE-EM-STD-5502-94) are used to determine classifications, such as Radiological, Nonnuclear, and Other Industrial facilities. Based upon DOE-EM-STD-5502-94, environmental restoration activities in all but one of the sites addressed by the scope of this classification (see Section 2) can be classified as ''Other Industrial Facility''. DOE-EM-STD-5502-94 states that a Health and Safety Plan and compliance with the applicable Occupational Safety and Health Administration (OSHA) standards are sufficient safety controls for this classification

Quantification of the health hazards associated with different energy sources

International Nuclear Information System (INIS)

Reissland, J.A.; Kendall, G.M.; Greenhalgh, J.R.

1982-01-01

Comparisons of health hazards which may result from the operation of different types of electrical power-producing systems are a necessary input to the decision-making process of planning future supplies. Although other factors have played a dominant role in the past and will continue to be a major influence, much greater attention is now devoted to a consideration of detriment to health associated with large-scale industrial development. The paper considers only this health aspect of the comparison and concentrates on one aspect of that, namely on how the impact on health of workers and public can be expressed to represent the detriment. Two measures are discussed: the number of deaths and the effective loss of life, both evaluated per GW(e).a. The latter is extended along the same lines as in the ICRP publication 'Problems Involved in Developing an Index of Harm'. The index of harm is a measure of hazard to a worker in a particular industry; the analogous quantity here is a measure of hazard of operating a 1-GW(e) power plant. For illustration, the hazards of coal-fired and nuclear power stations are compared although certain factors are omitted from both cycles which it will be essential to include if the method is extended to bring wind, wave and solar energy sources into the comparison. Inevitably some contributions are very difficult to quantify and it may be more realistic to consider these qualitatively rather than attempt to fold them in with artificial numerical values. The procedure described for the inclusion of quantifiable factors seems to be a reasonable basis for comparison but it is not suggested that any such procedure is adequate by itself. Clearly comparisons should be made on several distinct bases. (author)

Fire hazard analysis for the fuel supply shutdown storage buildings

International Nuclear Information System (INIS)

REMAIZE, J.A.

2000-01-01

The purpose of a fire hazards analysis (FHA) is to comprehensively assess the risk from fire and other perils within individual fire areas in a DOE facility in relation to proposed fire protection so as to ascertain whether the objectives of DOE 5480.7A, Fire Protection, are met. This Fire Hazards Analysis was prepared as required by HNF-PRO-350, Fire Hazards Analysis Requirements, (Reference 7) for a portion of the 300 Area N Reactor Fuel Fabrication and Storage Facility

GUI program to compute probabilistic seismic hazard analysis

International Nuclear Information System (INIS)

Shin, Jin Soo; Chi, H. C.; Cho, J. C.; Park, J. H.; Kim, K. G.; Im, I. S.

2006-12-01

The development of program to compute probabilistic seismic hazard is completed based on Graphic User Interface(GUI). The main program consists of three part - the data input processes, probabilistic seismic hazard analysis and result output processes. The probabilistic seismic hazard analysis needs various input data which represent attenuation formulae, seismic zoning map, and earthquake event catalog. The input procedure of previous programs based on text interface take a much time to prepare the data. The data cannot be checked directly on screen to prevent input erroneously in existing methods. The new program simplifies the input process and enable to check the data graphically in order to minimize the artificial error within limits of the possibility

An examination of interventions to reduce respiratory health and injury hazards in homes of low-income families

International Nuclear Information System (INIS)

Dixon, Sherry L.; Fowler, Cecile; Harris, Judy; Moffat, Sally; Martinez, Yolanda; Walton, Heather; Ruiz, Bernice; Jacobs, David E.

2009-01-01

We evaluated whether combining asthma trigger reduction with housing structural repairs, device disbursement and education in low-income households with children would improve self-reported respiratory health and reduce housing-related respiratory health and injury hazards (convenience sample of n=67 homes with 63 asthmatic and 121 non-asthmatic children). At baseline, a visual assessment of the home environment and a structured occupant interview were used to examine 29 potential injury hazards and 7 potential respiratory health hazards. A home-specific intervention was designed to provide the children's parents or caretakers with the knowledge, skills, motivation, supplies, equipment, and minimum housing conditions necessary for a healthy and safe home. The enrolled households were primarily Hispanic and owned their homes. On average, 8 injury hazards were observed in the homes at baseline. Four months following intervention, the average declined to 2.2 hazards per home (p<0.001), with 97% of the parents reporting that their homes were safer following the interventions. An average of 3.3 respiratory health hazards were observed in the homes at baseline. Four months following intervention, the average declined to 0.9 hazards per home (p<0.001), with 96% of parents reporting that the respiratory health of their asthmatic children improved. A tailored healthy homes improvement package significantly improves self-reported respiratory health and safety, reduces respiratory health and injury hazards, and can be implemented in concert with a mobile clinical setting

Women, Work and Health Hazards: A Fact Sheet and Cosmetologists: Health Risks at Work.

Science.gov (United States)

National Commission on Working Women, Washington, DC.

The first part of this document is a fact sheet that provides information on health hazards faced by employed women. It covers the Occupational Safety and Health Act (OSHA), job-related diseases suffered by workers in female-dominated occupations, employer responsibilities under OSHA, and the lack of statistical reporting on job-related disease.…

[Hazard function and life table: an introduction to the failure time analysis].

Science.gov (United States)

Matsushita, K; Inaba, H

1987-04-01

Failure time analysis has become popular in demographic studies. It can be viewed as a part of regression analysis with limited dependent variables as well as a special case of event history analysis and multistate demography. The idea of hazard function and failure time analysis, however, has not been properly introduced to nor commonly discussed by demographers in Japan. The concept of hazard function in comparison with life tables is briefly described, where the force of mortality is interchangeable with the hazard rate. The basic idea of failure time analysis is summarized for the cases of exponential distribution, normal distribution, and proportional hazard models. The multiple decrement life table is also introduced as an example of lifetime data analysis with cause-specific hazard rates.

Health state of population as a criterion of harmfulness of environmental pollution with hazardous wastes

International Nuclear Information System (INIS)

Khacatrian, T.S.

1991-01-01

Valuation of children's health state living in an industrial city, in different microdistricts of which environmental pollution with various hazardous wastes takes place, is done. Investigation results established essential distinctions in health state of children's contingent under examination in dependence upon microdistrict of their permanent living in the given city which is connected with the environmental pollution with various hazardous wastes. The received data allow to examine the health state of population as an integral indicator of ecological situation in the region, and also as a criterion of environmental pollution with hazardous wastes. (au)

Hazardous-waste analysis plan for LLNL operations

Energy Technology Data Exchange (ETDEWEB)

Roberts, R.S.

1982-02-12

The Lawrence Livermore National Laboratory is involved in many facets of research ranging from nuclear weapons research to advanced Biomedical studies. Approximately 80% of all programs at LLNL generate hazardous waste in one form or another. Aside from producing waste from industrial type operations (oils, solvents, bottom sludges, etc.) many unique and toxic wastes are generated such as phosgene, dioxin (TCDD), radioactive wastes and high explosives. One key to any successful waste management program must address the following: proper identification of the waste, safe handling procedures and proper storage containers and areas. This section of the Waste Management Plan will address methodologies used for the Analysis of Hazardous Waste. In addition to the wastes defined in 40 CFR 261, LLNL and Site 300 also generate radioactive waste not specifically covered by RCRA. However, for completeness, the Waste Analysis Plan will address all hazardous waste.

Hazardous-waste analysis plan for LLNL operations

International Nuclear Information System (INIS)

Roberts, R.S.

1982-01-01

The Lawrence Livermore National Laboratory is involved in many facets of research ranging from nuclear weapons research to advanced Biomedical studies. Approximately 80% of all programs at LLNL generate hazardous waste in one form or another. Aside from producing waste from industrial type operations (oils, solvents, bottom sludges, etc.) many unique and toxic wastes are generated such as phosgene, dioxin (TCDD), radioactive wastes and high explosives. One key to any successful waste management program must address the following: proper identification of the waste, safe handling procedures and proper storage containers and areas. This section of the Waste Management Plan will address methodologies used for the Analysis of Hazardous Waste. In addition to the wastes defined in 40 CFR 261, LLNL and Site 300 also generate radioactive waste not specifically covered by RCRA. However, for completeness, the Waste Analysis Plan will address all hazardous waste

The practical implementation of integrated safety management for nuclear safety analysis and fire hazards analysis documentation

International Nuclear Information System (INIS)

COLLOPY, M.T.

1999-01-01

In 1995 Mr. Joseph DiNunno of the Defense Nuclear Facilities Safety Board issued an approach to describe the concept of an integrated safety management program which incorporates hazard and safety analysis to address a multitude of hazards affecting the public, worker, property, and the environment. Since then the U S . Department of Energy (DOE) has adopted a policy to systematically integrate safety into management and work practices at all levels so that missions can be completed while protecting the public, worker, and the environment. While the DOE and its contractors possessed a variety of processes for analyzing fire hazards at a facility, activity, and job; the outcome and assumptions of these processes have not always been consistent for similar types of hazards within the safety analysis and the fire hazard analysis. Although the safety analysis and the fire hazard analysis are driven by different DOE Orders and requirements, these analyses should not be entirely independent and their preparation should be integrated to ensure consistency of assumptions, consequences, design considerations, and other controls. Under the DOE policy to implement an integrated safety management system, identification of hazards must be evaluated and agreed upon to ensure that the public. the workers. and the environment are protected from adverse consequences. The DOE program and contractor management need a uniform, up-to-date reference with which to plan. budget, and manage nuclear programs. It is crucial that DOE understand the hazards and risks necessarily to authorize the work needed to be performed. If integrated safety management is not incorporated into the preparation of the safety analysis and the fire hazard analysis, inconsistencies between assumptions, consequences, design considerations, and controls may occur that affect safety. Furthermore, confusion created by inconsistencies may occur in the DOE process to grant authorization of the work. In accordance with

Hazard visibility and occupational health problem solving the case of the uranium industry

International Nuclear Information System (INIS)

Pearson, J.

1980-01-01

Recent evidence from European research challenges the adequacy of current US exposure guidelines for underground mine radiation. This study traces the history of government regulatory agency and industry response to the hazard of excessive mine radiation in the uranium industry in Colorado some 30 years ago. Problem-solving activity by government agencies and companies is shown to coincide with how visible the health hazard to uranium miners becomes. Hazard visibility and key problem-solving variables are defined and measured. The article also discusses a number of social factors that affect societal response to evidence of an occupational health hazard. Those factors include the elusiveness of the disease and its symptoms, the social class of the victim, the level of medical and scientific interest in its cause and cure, and the economic costs of the disease

Preliminary hazards analysis of thermal scrap stabilization system. Revision 1

International Nuclear Information System (INIS)

Lewis, W.S.

1994-01-01

This preliminary analysis examined the HA-21I glovebox and its supporting systems for potential process hazards. Upon further analysis, the thermal stabilization system has been installed in gloveboxes HC-21A and HC-21C. The use of HC-21C and HC-21A simplified the initial safety analysis. In addition, these gloveboxes were cleaner and required less modification for operation than glovebox HA-21I. While this document refers to glovebox HA-21I for the hazards analysis performed, glovebox HC-21C is sufficiently similar that the following analysis is also valid for HC-21C. This hazards analysis document is being re-released as revision 1 to include the updated flowsheet document (Appendix C) and the updated design basis (Appendix D). The revised Process Flow Schematic has also been included (Appendix E). This Current revision incorporates the recommendations provided from the original hazards analysis as well. The System Design Description (SDD) has also been appended (Appendix H) to document the bases for Safety Classification of thermal stabilization equipment

Performance Analysis: Control of Hazardous Energy

Energy Technology Data Exchange (ETDEWEB)

De Grange, Connie E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Freeman, Jeff W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kerr, Christine E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2010-10-06

LLNL experienced 26 occurrences related to the control of hazardous energy from January 1, 2008 through August 2010. These occurrences were 17% of the total number of reported occurrences during this 32-month period. The Performance Analysis and Reporting Section of the Contractor Assurance Office (CAO) routinely analyzes reported occurrences and issues looking for patterns that may indicate changes in LLNL’s performance and early indications of performance trends. It became apparent through these analyses that LLNL might have experienced a change in the control of hazardous energy and that these occurrences should be analyzed in more detail to determine if the perceived change in performance was real, whether that change is significant and if the causes of the occurrences are similar. This report documents the results of this more detailed analysis.

21 CFR 120.8 - Hazard Analysis and Critical Control Point (HACCP) plan.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Hazard Analysis and Critical Control Point (HACCP... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION HAZARD ANALYSIS AND CRITICAL CONTROL POINT (HACCP) SYSTEMS General Provisions § 120.8 Hazard Analysis and Critical Control Point (HACCP) plan. (a) HACCP plan. Each...

Agent-based simulation for human-induced hazard analysis.

Science.gov (United States)

Bulleit, William M; Drewek, Matthew W

2011-02-01

Terrorism could be treated as a hazard for design purposes. For instance, the terrorist hazard could be analyzed in a manner similar to the way that seismic hazard is handled. No matter how terrorism is dealt with in the design of systems, the need for predictions of the frequency and magnitude of the hazard will be required. And, if the human-induced hazard is to be designed for in a manner analogous to natural hazards, then the predictions should be probabilistic in nature. The model described in this article is a prototype model that used agent-based modeling (ABM) to analyze terrorist attacks. The basic approach in this article of using ABM to model human-induced hazards has been preliminarily validated in the sense that the attack magnitudes seem to be power-law distributed and attacks occur mostly in regions where high levels of wealth pass through, such as transit routes and markets. The model developed in this study indicates that ABM is a viable approach to modeling socioeconomic-based infrastructure systems for engineering design to deal with human-induced hazards. © 2010 Society for Risk Analysis.

Seismic hazard analysis of Sinop province, Turkey using ...

Indian Academy of Sciences (India)

1997-01-11

Jan 11, 1997 ... 2008 in the Sinop province of Turkey this study presents a seismic hazard analysis based on ... Considering the development and improvement ... It is one of the most populated cities in the coun- ... done as reliably as the seismic hazard of region per- .... Seismic safety work of underground networks was.

AN ENHANCED HAZARD ANALYSIS PROCESS FOR THE HANFORD TANK FARMS

International Nuclear Information System (INIS)

SHULTZ MV

2008-01-01

CH2M HILL Hanford Group, Inc., has expanded the scope and increased the formality of process hazards analyses performed on new or modified Tank Farm facilities, designs, and processes. The CH2M HILL process hazard analysis emphasis has been altered to reflect its use as a fundamental part of the engineering and change control process instead of simply being a nuclear safety analysis tool. The scope has been expanded to include identification of accidents/events that impact the environment, or require emergency response, in addition to those with significant impact to the facility worker, the offsite, and the 100-meter receptor. Also, there is now an expectation that controls will be identified to address all types of consequences. To ensure that the process has an appropriate level of rigor and formality, a new engineering standard for process hazards analysis was created. This paper discusses the role of process hazards analysis as an information source for not only nuclear safety, but also for the worker-safety management programs, emergency management, environmental programs. This paper also discusses the role of process hazards analysis in the change control process, including identifying when and how it should be applied to changes in design or process

A survey of occupational health hazards among 7,610 female workers in China's electronics industry.

Science.gov (United States)

Yu, Wenlan; Lao, Xiang Qian; Pang, Shulan; Zhou, Jianjiao; Zhou, Anshou; Zou, Jianfang; Mei, Liangying; Yu, Ignatius Tak-sun

2013-01-01

To investigate the occupational hazards among Chinese female workers in the electronics industry, the authors systematically sampled a total of 8,300 female workers at random across 4 provinces in a variety of electronics factories. A detailed questionnaire was used to collect information on occupational hazards and the occurrence of occupation-related diseases. The results show that 4,283 female workers (51.9%) were exposed to 1 or more occupational hazards. The most common chemical hazard was organic solvent, and the second most common was heavy metals. The ergonomic hazards included repetitive movements, poor standing posture, and the lifting of heavy goods. More than 60% of the female workers self-reported occupation-related diseases. These results showed that occupational health hazards were common in the electronics industry in China and that they caused serious occupation-related health problems for the female workers therein.

Goal-oriented failure analysis - a systems analysis approach to hazard identification

International Nuclear Information System (INIS)

Reeves, A.B.; Davies, J.; Foster, J.; Wells, G.L.

1990-01-01

Goal-Oriented Failure Analysis, GOFA, is a methodology which is being developed to identify and analyse the potential failure modes of a hazardous plant or process. The technique will adopt a structured top-down approach, with a particular failure goal being systematically analysed. A systems analysis approach is used, with the analysis being organised around a systems diagram of the plant or process under study. GOFA will also use checklists to supplement the analysis -these checklists will be prepared in advance of a group session and will help to guide the analysis and avoid unnecessary time being spent on identifying obvious failure modes or failing to identify certain hazards or failures. GOFA is being developed with the aim of providing a hazard identification methodology which is more efficient and stimulating than the conventional approach to HAZOP. The top-down approach should ensure that the analysis is more focused and the use of a systems diagram will help to pull the analysis together at an early stage whilst also helping to structure the sessions in a more stimulating way than the conventional techniques. GOFA will be, essentially, an extension of the HAZOP methodology. GOFA is currently being computerised using a knowledge-based systems approach for implementation. The Goldworks II expert systems development tool is being used. (author)

GUI program to compute probabilistic seismic hazard analysis

International Nuclear Information System (INIS)

Shin, Jin Soo; Chi, H. C.; Cho, J. C.; Park, J. H.; Kim, K. G.; Im, I. S.

2005-12-01

The first stage of development of program to compute probabilistic seismic hazard is completed based on Graphic User Interface (GUI). The main program consists of three part - the data input processes, probabilistic seismic hazard analysis and result output processes. The first part has developed and others are developing now in this term. The probabilistic seismic hazard analysis needs various input data which represent attenuation formulae, seismic zoning map, and earthquake event catalog. The input procedure of previous programs based on text interface take a much time to prepare the data. The data cannot be checked directly on screen to prevent input erroneously in existing methods. The new program simplifies the input process and enable to check the data graphically in order to minimize the artificial error within the limits of the possibility

Hazard Ranking Methodology for Assessing Health Impacts of Unconventional Natural Gas Development and Production: The Maryland Case Study.

Directory of Open Access Journals (Sweden)

Meleah D Boyle

Full Text Available The recent growth of unconventional natural gas development and production (UNGDP has outpaced research on the potential health impacts associated with the process. The Maryland Marcellus Shale Public Health Study was conducted to inform the Maryland Marcellus Shale Safe Drilling Initiative Advisory Commission, State legislators and the Governor about potential public health impacts associated with UNGDP so they could make an informed decision that considers the health and well-being of Marylanders. In this paper, we describe an impact assessment and hazard ranking methodology we used to assess the potential public health impacts for eight hazards associated with the UNGDP process. The hazard ranking included seven metrics: 1 presence of vulnerable populations (e.g. children under the age of 5, individuals over the age of 65, surface owners, 2 duration of exposure, 3 frequency of exposure, 4 likelihood of health effects, 5 magnitude/severity of health effects, 6 geographic extent, and 7 effectiveness of setbacks. Overall public health concern was determined by a color-coded ranking system (low, moderately high, and high that was generated based on the overall sum of the scores for each hazard. We provide three illustrative examples of applying our methodology for air quality and health care infrastructure which were ranked as high concern and for water quality which was ranked moderately high concern. The hazard ranking was a valuable tool that allowed us to systematically evaluate each of the hazards and provide recommendations to minimize the hazards.

WIPP fire hazards and risk analysis

International Nuclear Information System (INIS)

1991-05-01

The purpose of this analysis was to conduct a fire hazards risk analysis of the Transuranic (TRU) contact-handled waste receipt, emplacement, and disposal activities at the Waste Isolation Pilot Plant (WIPP). The technical bases and safety envelope for these operations are defined in the approved WIPP Final Safety Analysis Report (FSAR). Although the safety documentation for the initial phase of the Test Program, the dry bin scale tests, has not yet been approved by the Department of Energy (DOE), reviews of the draft to date, including those by the Advisory Committee on Nuclear Facility Safety (ACNFS), have concluded that the dry bin scale tests present no significant risks in excess of those estimated in the approved WIPP FSAR. It is the opinion of the authors and reviewers of this analysis, based on sound engineering judgment and knowledge of the WIPP operations, that a Fire Hazards and Risk Analysis specific to the dry bin scale test program is not warranted prior to first waste receipt. This conclusion is further supported by the risk analysis presented in this document which demonstrates the level of risk to WIPP operations posed by fire to be extremely low. 15 refs., 41 figs., 48 tabs

Automated economic analysis model for hazardous waste minimization

International Nuclear Information System (INIS)

Dharmavaram, S.; Mount, J.B.; Donahue, B.A.

1990-01-01

The US Army has established a policy of achieving a 50 percent reduction in hazardous waste generation by the end of 1992. To assist the Army in reaching this goal, the Environmental Division of the US Army Construction Engineering Research Laboratory (USACERL) designed the Economic Analysis Model for Hazardous Waste Minimization (EAHWM). The EAHWM was designed to allow the user to evaluate the life cycle costs for various techniques used in hazardous waste minimization and to compare them to the life cycle costs of current operating practices. The program was developed in C language on an IBM compatible PC and is consistent with other pertinent models for performing economic analyses. The potential hierarchical minimization categories used in EAHWM include source reduction, recovery and/or reuse, and treatment. Although treatment is no longer an acceptable minimization option, its use is widespread and has therefore been addressed in the model. The model allows for economic analysis for minimization of the Army's six most important hazardous waste streams. These include, solvents, paint stripping wastes, metal plating wastes, industrial waste-sludges, used oils, and batteries and battery electrolytes. The EAHWM also includes a general application which can be used to calculate and compare the life cycle costs for minimization alternatives of any waste stream, hazardous or non-hazardous. The EAHWM has been fully tested and implemented in more than 60 Army installations in the United States

Job safety analysis and hazard identification for work accident prevention in para rubber wood sawmills in southern Thailand.

Science.gov (United States)

Thepaksorn, Phayong; Thongjerm, Supawan; Incharoen, Salee; Siriwong, Wattasit; Harada, Kouji; Koizumi, Akio

2017-11-25

We utilized job safety analysis (JSA) and hazard identification for work accident prevention in Para rubber wood sawmills, which aimed to investigate occupational health risk exposures and assess the health hazards at sawmills in the Trang Province, located in southern Thailand. We conducted a cross-sectional study which included a walk-through survey, JSA, occupational risk assessment, and environmental samplings from March through September 2015 at four Para rubber wood sawmills. We identified potential occupational safety and health hazards associated with six main processes, including: 1) logging and cutting, 2) sawing the lumber into sheets, 3) planing and re-arranging, 4) vacuuming and wood preservation, 5) drying and planks re-arranging, and 6) grading, packing, and storing. Working in sawmills was associated with high risk of wood dust and noise exposure, occupational accidents injuring hands and feet, chemicals and fungicide exposure, and injury due to poor ergonomics or repetitive work. Several high-risk areas were identified from JSA and hazard identification of the working processes, especially high wood dust and noise exposure when sawing lumber into sheets and risk of occupational accidents of the hands and feet when struck by lumber. All workers were strongly recommended to use personal protective equipment in any working processes. Exposures should be controlled using local ventilation systems and reducing noise transmission. We recommend that the results from the risk assessment performed in this study be used to create an action plan for reducing occupational health hazards in Para rubber sawmills.

340 Waste handling Facility Hazard Categorization and Safety Analysis

International Nuclear Information System (INIS)

Rodovsky, T.J.

2010-01-01

The analysis presented in this document provides the basis for categorizing the facility as less than Hazard Category 3. The final hazard categorization for the deactivated 340 Waste Handling Facility (340 Facility) is presented in this document. This hazard categorization was prepared in accordance with DOE-STD-1 027-92, Change Notice 1, Hazard Categorization and Accident Analysis Techniques for Compliance with Doe Order 5480.23, Nuclear Safety Analysis Reports. The analysis presented in this document provides the basis for categorizing the facility as less than Hazard Category (HC) 3. Routine nuclear waste receiving, storage, handling, and shipping operations at the 340 Facility have been deactivated, however, the facility contains a small amount of radioactive liquid and/or dry saltcake in two underground vault tanks. A seismic event and hydrogen deflagration were selected as bounding accidents. The generation of hydrogen in the vault tanks without active ventilation was determined to achieve a steady state volume of 0.33%, which is significantly less than the lower flammability limit of 4%. Therefore, a hydrogen deflagration is not possible in these tanks. The unmitigated release from a seismic event was used to categorize the facility consistent with the process defined in Nuclear Safety Technical Position (NSTP) 2002-2. The final sum-of-fractions calculation concluded that the facility is less than HC 3. The analysis did not identify any required engineered controls or design features. The Administrative Controls that were derived from the analysis are: (1) radiological inventory control, (2) facility change control, and (3) Safety Management Programs (SMPs). The facility configuration and radiological inventory shall be controlled to ensure that the assumptions in the analysis remain valid. The facility commitment to SMPs protects the integrity of the facility and environment by ensuring training, emergency response, and radiation protection. The full scale

Hazard Analysis of Arid and Semi-Arid (ASAL) Regions of Kenya ...

African Journals Online (AJOL)

Objectives: The overall objective of this study was to prioritize hazards in the ASAL region. ... Health, local Government, and Provincial Administration, Environment and NGO. ... and country level to inform interventions and other developmental activities. Women ... Keywords: hazard, natural disaster, disaster risk, arid, Kenya ...

Environmental and health hazard ranking and assessment of plastic polymers based on chemical composition

Energy Technology Data Exchange (ETDEWEB)

Lithner, Delilah, E-mail: delilah.lithner@gmail.com; Larsson, Ake; Dave, Goeran

2011-08-15

Plastics constitute a large material group with a global annual production that has doubled in 15 years (245 million tonnes in 2008). Plastics are present everywhere in society and the environment, especially the marine environment, where large amounts of plastic waste accumulate. The knowledge of human and environmental hazards and risks from chemicals associated with the diversity of plastic products is very limited. Most chemicals used for producing plastic polymers are derived from non-renewable crude oil, and several are hazardous. These may be released during the production, use and disposal of the plastic product. In this study the environmental and health hazards of chemicals used in 55 thermoplastic and thermosetting polymers were identified and compiled. A hazard ranking model was developed for the hazard classes and categories in the EU classification and labelling (CLP) regulation which is based on the UN Globally Harmonized System. The polymers were ranked based on monomer hazard classifications, and initial assessments were made. The polymers that ranked as most hazardous are made of monomers classified as mutagenic and/or carcinogenic (category 1A or 1B). These belong to the polymer families of polyurethanes, polyacrylonitriles, polyvinyl chloride, epoxy resins, and styrenic copolymers. All have a large global annual production (1-37 million tonnes). A considerable number of polymers (31 out of 55) are made of monomers that belong to the two worst of the ranking model's five hazard levels, i.e. levels IV-V. The polymers that are made of level IV monomers and have a large global annual production (1-5 million tonnes) are phenol formaldehyde resins, unsaturated polyesters, polycarbonate, polymethyl methacrylate, and urea-formaldehyde resins. This study has identified hazardous substances used in polymer production for which the risks should be evaluated for decisions on the need for risk reduction measures, substitution, or even phase out

Examining Public Perceptions about Lead in School Drinking Water: A Mixed-Methods Analysis of Twitter Response to an Environmental Health Hazard.

Science.gov (United States)

Ekenga, Christine C; McElwain, Cora-Ann; Sprague, Nadav

2018-01-20

Exposure to lead has long been a community health concern in St. Louis, Missouri. The objective of this study was to examine public response to reports of elevated lead levels in school drinking water in St. Louis, Missouri via Twitter, a microblogging platform with over 320 million active users. We used a mixed-methods design to examine Twitter user status updates, known as "tweets," from 18 August to 31 December 2016. The number of tweets each day was recorded, and Twitter users were classified into five user types (General Public, Journalist/News, Health Professional/Academic, Politician/Government Official, and Non-Governmental Organization). A total of 492 tweets were identified during the study period. The majority of discourse on Twitter occurred during the two-week period after initial media reports and was driven by members of the General Public. Thematic analysis of tweets revealed four themes: Information Sharing, Health Concerns, Sociodemographic Disparities, and Outrage. Twitter users characterized lead in school drinking water as an issue of environmental inequity. The findings of this study provide evidence that social media platforms can be utilized as valuable tools for public health researchers and practitioners to gauge public sentiment about environmental health issues, identify emerging community concerns, and inform future communication and research strategies regarding environmental health hazards.

Hazards Analysis for the Spent Nuclear Fuel L-Experimental Facility

International Nuclear Information System (INIS)

Blanchard, A.

1999-01-01

The purpose of this Hazard Analysis (HA) is to identify and assess potential hazards associated with the operations of the Spent Nuclear Fuels (SNF) Treatment and Storage Facility LEF. Additionally, this HA will be used for identifying and assessing potential hazards and specifying functional attributes of SSCs for the LEF project

Health hazards due to radon and its daughters

International Nuclear Information System (INIS)

Khan, H.A.; Qureshi, I.E.; Tufail, M.

1993-01-01

The health hazards liked to radon and its daughters have become a matter of great public concern. When inhaled, a fraction of radon is dissolved into the lung fluid, from where it is transported to other parts of the body. The radiation damage is caused to the lungs due to alpha decay of radon during its transit time within the respiratory tract. Radon daughters are found to be even more dangerous than radon itself. These daughters attach themselves to dust particles present in the air. Some of the aerosols so produced enter the lungs and enter the blood stream. It has now been confirmed that radon and its daughters contribute about 70% of the internal dose received by an individual from natural radiation sources. The danger of indoor radon and its daughters is even higher for energy-saving houses and those having poor ventilation systems. This paper briefly describes the health hazards due to radon and its daughters. Different methods employed for the measurement of concentrations of radon and their daughters are described. The experience gained from the nation-wide surveys carried out in different countries is also given. (author). 18 refs, 3 figs, 1 tab

Hazards from aircraft

International Nuclear Information System (INIS)

Grund, J.E.; Hornyik, K.

1975-01-01

The siting of nuclear power plants has created innumerable environmental concerns. Among the effects of the ''man-made environment'' one of increasing importance in recent nuclear plant siting hazards analysis has been the concern about aircraft hazards to the nuclear plant. These hazards are of concern because of the possibility that an aircraft may have a malfunction and crash either near the plant or directly into it. Such a crash could be postulated to result, because of missile and/or fire effects, in radioactive releases which would endanger the public health and safety. The majority of studies related to hazards from air traffic have been concerned with the determination of the probability associated with an aircraft striking vulnerable portions of a given plant. Other studies have focused on the structural response to such a strike. This work focuses on the problem of strike probability. 13 references

A CONCEPTUAL DISASTER RISK REDUCTION FRAMEWORK FOR HEALTH AND SAFETY HAZARDS IN THE CONSTRUCTION INDUSTRY

Directory of Open Access Journals (Sweden)

Amir S. GOHARDANI

2013-06-01

Full Text Available The health and safety hazard status of construction workers is constantly challenged by the projects in the built environment. In this article, various aspects of health and safety hazards for construction workers have been reviewed and investigated through a disaster risk reduction prism. This approach has further led to the perception of glancing at the construction sector as an ongoing disaster zone and equally provides a new management perspective. From this perspective, the occurrence of a disaster within the construction sector corresponds to the temporary or permanent ill-health or death of a construction worker. Geographical location is one of the factors that play an important role in addressing the health and safety hazards for construction workers. In addition to the location, geographical considerations equally encapsulate regional, cultural, governmental and work ethical effects. These effects may potentially contribute to disparities in the construction sector. With an increasing level of understanding for health and safety hazards in the construction domain, more efficient prevention measures can be taken in order to enable a disaster management cycle, capable of responding to the rigorous demands of the construction sector.

Preliminary Hazards Analysis of K-Basin Fuel Encapsulation and Storage

International Nuclear Information System (INIS)

Strickland, G.C.

1994-01-01

This Preliminary Hazards Analysis (PHA) systematically examines the K-Basin facilities and their supporting systems for hazards created by abnormal operating conditions and external events (e.g., earthquakes) which have the potential for causing undesirable consequences to the facility worker, the onsite individual, or the public. The operational activities examined are fuel encapsulation, fuel storage and cooling. Encapsulation of sludges in the basins is not examined. A team of individuals from Westinghouse produced a set of Hazards and Operability (HAZOP) tables documenting their examination of abnormal process conditions in the systems and activities examined in K-Basins. The purpose of this report is to reevaluate and update the HAZOP in the original Preliminary Hazard Analysis of K-Basin Fuel Encapsulation and Storage originally developed in 1991

Decision analysis for INEL hazardous waste storage

Energy Technology Data Exchange (ETDEWEB)

Page, L.A.; Roach, J.A.

1994-01-01

In mid-November 1993, the Idaho National Engineering Laboratory (INEL) Waste Reduction Operations Complex (WROC) Manager requested that the INEL Hazardous Waste Type Manager perform a decision analysis to determine whether or not a new Hazardous Waste Storage Facility (HWSF) was needed to store INEL hazardous waste (HW). In response to this request, a team was formed to perform a decision analysis for recommending the best configuration for storage of INEL HW. Personnel who participated in the decision analysis are listed in Appendix B. The results of the analysis indicate that the existing HWSF is not the best configuration for storage of INEL HW. The analysis detailed in Appendix C concludes that the best HW storage configuration would be to modify and use a portion of the Waste Experimental Reduction Facility (WERF) Waste Storage Building (WWSB), PBF-623 (Alternative 3). This facility was constructed in 1991 to serve as a waste staging facility for WERF incineration. The modifications include an extension of the current Room 105 across the south end of the WWSB and installing heating, ventilation, and bay curbing, which would provide approximately 1,600 ft{sup 2} of isolated HW storage area. Negotiations with the State to discuss aisle space requirements along with modifications to WWSB operating procedures are also necessary. The process to begin utilizing the WWSB for HW storage includes planned closure of the HWSF, modification to the WWSB, and relocation of the HW inventory. The cost to modify the WWSB can be funded by a reallocation of funding currently identified to correct HWSF deficiencies.

Decision analysis for INEL hazardous waste storage

International Nuclear Information System (INIS)

Page, L.A.; Roach, J.A.

1994-01-01

In mid-November 1993, the Idaho National Engineering Laboratory (INEL) Waste Reduction Operations Complex (WROC) Manager requested that the INEL Hazardous Waste Type Manager perform a decision analysis to determine whether or not a new Hazardous Waste Storage Facility (HWSF) was needed to store INEL hazardous waste (HW). In response to this request, a team was formed to perform a decision analysis for recommending the best configuration for storage of INEL HW. Personnel who participated in the decision analysis are listed in Appendix B. The results of the analysis indicate that the existing HWSF is not the best configuration for storage of INEL HW. The analysis detailed in Appendix C concludes that the best HW storage configuration would be to modify and use a portion of the Waste Experimental Reduction Facility (WERF) Waste Storage Building (WWSB), PBF-623 (Alternative 3). This facility was constructed in 1991 to serve as a waste staging facility for WERF incineration. The modifications include an extension of the current Room 105 across the south end of the WWSB and installing heating, ventilation, and bay curbing, which would provide approximately 1,600 ft 2 of isolated HW storage area. Negotiations with the State to discuss aisle space requirements along with modifications to WWSB operating procedures are also necessary. The process to begin utilizing the WWSB for HW storage includes planned closure of the HWSF, modification to the WWSB, and relocation of the HW inventory. The cost to modify the WWSB can be funded by a reallocation of funding currently identified to correct HWSF deficiencies

Environmental risk analysis of hazardous material rail transportation

Energy Technology Data Exchange (ETDEWEB)

Saat, Mohd Rapik, E-mail: mohdsaat@illinois.edu [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States); Werth, Charles J.; Schaeffer, David [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States); Yoon, Hongkyu [Sandia National Laboratories, Albuquerque, NM 87123 (United States); Barkan, Christopher P.L. [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States)

2014-01-15

Highlights: • Comprehensive, nationwide risk assessment of hazardous material rail transportation. • Application of a novel environmental (i.e. soil and groundwater) consequence model. • Cleanup cost and total shipment distance are the most significant risk factors. • Annual risk varies from $20,000 to $560,000 for different products. • Provides information on the risk cost associated with specific product shipments. -- Abstract: An important aspect of railroad environmental risk management involves tank car transportation of hazardous materials. This paper describes a quantitative, environmental risk analysis of rail transportation of a group of light, non-aqueous-phase liquid (LNAPL) chemicals commonly transported by rail in North America. The Hazardous Materials Transportation Environmental Consequence Model (HMTECM) was used in conjunction with a geographic information system (GIS) analysis of environmental characteristics to develop probabilistic estimates of exposure to different spill scenarios along the North American rail network. The risk analysis incorporated the estimated clean-up cost developed using the HMTECM, route-specific probability distributions of soil type and depth to groundwater, annual traffic volume, railcar accident rate, and tank car safety features, to estimate the nationwide annual risk of transporting each product. The annual risk per car-mile (car-km) and per ton-mile (ton-km) was also calculated to enable comparison between chemicals and to provide information on the risk cost associated with shipments of these products. The analysis and the methodology provide a quantitative approach that will enable more effective management of the environmental risk of transporting hazardous materials.

Environmental risk analysis of hazardous material rail transportation

International Nuclear Information System (INIS)

Saat, Mohd Rapik; Werth, Charles J.; Schaeffer, David; Yoon, Hongkyu; Barkan, Christopher P.L.

2014-01-01

Highlights: • Comprehensive, nationwide risk assessment of hazardous material rail transportation. • Application of a novel environmental (i.e. soil and groundwater) consequence model. • Cleanup cost and total shipment distance are the most significant risk factors. • Annual risk varies from $20,000 to $560,000 for different products. • Provides information on the risk cost associated with specific product shipments. -- Abstract: An important aspect of railroad environmental risk management involves tank car transportation of hazardous materials. This paper describes a quantitative, environmental risk analysis of rail transportation of a group of light, non-aqueous-phase liquid (LNAPL) chemicals commonly transported by rail in North America. The Hazardous Materials Transportation Environmental Consequence Model (HMTECM) was used in conjunction with a geographic information system (GIS) analysis of environmental characteristics to develop probabilistic estimates of exposure to different spill scenarios along the North American rail network. The risk analysis incorporated the estimated clean-up cost developed using the HMTECM, route-specific probability distributions of soil type and depth to groundwater, annual traffic volume, railcar accident rate, and tank car safety features, to estimate the nationwide annual risk of transporting each product. The annual risk per car-mile (car-km) and per ton-mile (ton-km) was also calculated to enable comparison between chemicals and to provide information on the risk cost associated with shipments of these products. The analysis and the methodology provide a quantitative approach that will enable more effective management of the environmental risk of transporting hazardous materials

Standarized radiological hazard analysis for a broad based operational safety program

International Nuclear Information System (INIS)

Wadman, W.W. III; Andrews, L.L.

1992-01-01

The Radiological hazard Analysis (RHA) Manual provides a methodology and detailed guidance for systematic analysis of radiological hazards over a broad spectrum of program functions, housed in a wide variety of facilities. Radiological programs at LANL include: research and experimentation; routine materials operations; production; non-destructive examination or testing; isotope and machine produced radiations; chemistry; and metallurgy. The RHA permits uniform evaluation of hazard types over a range of several orders of magnitude of hazard severity. The results are used to estimate risk, evaluate types and level or resource allocations, identify deficiencies, and plan corrective actions for safe working environments. 2 refs

Standardized radiological hazard analysis for a broad based operational safety program

International Nuclear Information System (INIS)

Wadman, W. III; Andrews, L.

1992-01-01

The Radiological Hazard Analysis (RHA) Manual provides a methodology and detailed guidance for systematic analysis of radiological hazards over a broad spectrum of program functions, housed in a wide variety of facilities. Radiological programs at LANL include: research and experimentation routine materials operations; production; non-destructive examination or testing; isotope and machine produced radiations; chemistry; and metallurgy. The RHA permits uniform evaluation of hazard types over a range of several orders of magnitude of hazard severity. The results are used to estimate risk, evaluate types and level of resource allocations, identify deficiencies, and plan corrective actions for safe working environments. (author)

An investigation of the health hazards of some of the chemical ...

African Journals Online (AJOL)

This short piece takes a limited look at the health hazards of the chemical contents of seven fruit juices sold in The Gambia. All of them have very negative effects on health. The following additives were considered: sweeteners, coloring agents, flavoring agents and acidifiers vis-à-vis established studies. [African Journal of ...

Hazards analysis of TNX Large Melter-Off-Gas System

International Nuclear Information System (INIS)

Randall, C.T.

1982-03-01

Analysis of the potential safety hazards and an evaluation of the engineered safety features and administrative controls indicate that the LMOG System can be operated without undue hazard to employees or the public, or damage to equipment. The safety features provided in the facility design coupled with the planned procedural and administrative controls make the occurrence of serious accidents very improbable. A set of recommendations evolved during this analysis that was judged potentially capable of further reducing the probability of personnel injury or further mitigating the consequences of potential accidents. These recommendations concerned areas such as formic acid vapor hazards, hazard of feeding water to the melter at an uncontrolled rate, prevention of uncontrolled glass pours due to melter pressure excursions and additional interlocks. These specific suggestions were reviewed with operational and technical personnel and are being incorporated into the process. The safeguards provided by these recommendations are discussed in this report

Statistical analysis of the uncertainty related to flood hazard appraisal

Science.gov (United States)

Notaro, Vincenza; Freni, Gabriele

2015-12-01

The estimation of flood hazard frequency statistics for an urban catchment is of great interest in practice. It provides the evaluation of potential flood risk and related damage and supports decision making for flood risk management. Flood risk is usually defined as function of the probability, that a system deficiency can cause flooding (hazard), and the expected damage, due to the flooding magnitude (damage), taking into account both the exposure and the vulnerability of the goods at risk. The expected flood damage can be evaluated by an a priori estimation of potential damage caused by flooding or by interpolating real damage data. With regard to flood hazard appraisal several procedures propose to identify some hazard indicator (HI) such as flood depth or the combination of flood depth and velocity and to assess the flood hazard corresponding to the analyzed area comparing the HI variables with user-defined threshold values or curves (penalty curves or matrixes). However, flooding data are usually unavailable or piecemeal allowing for carrying out a reliable flood hazard analysis, therefore hazard analysis is often performed by means of mathematical simulations aimed at evaluating water levels and flow velocities over catchment surface. As results a great part of the uncertainties intrinsic to flood risk appraisal can be related to the hazard evaluation due to the uncertainty inherent to modeling results and to the subjectivity of the user defined hazard thresholds applied to link flood depth to a hazard level. In the present work, a statistical methodology was proposed for evaluating and reducing the uncertainties connected with hazard level estimation. The methodology has been applied to a real urban watershed as case study.

The health hazards of depleted uranium munitions. Part 1

International Nuclear Information System (INIS)

2001-01-01

Depleted uranium is a toxic and weakly radioactive metal used for a variety of purposes. Perhaps its most controversial use is in battlefield munitions, where it can be widely dispersed in the form of fine particles and shrapnel that may enter the bodies of combatants and others through inhalation, ingestion or wounding. It is a matter of legitimate public concern whether the use of this material in this way could create unacceptable health hazards or damage to the environment. The objective of our study has been to provide the best scientific understanding of the ways in which the material may be distributed, how it may be taken up by humans, and the potential implications for health. For politicians, any hazards to health have to be balanced against the military advantages that the use of these munitions confers. We have not tried to reach a judgment on these political issues, but we believe that a better scientific understanding of the extent of the hazards will make it easier for these wider questions to be addressed in a more objective way. This report is the first of two, and addresses the likely levels of exposure to depleted uranium, the resulting radiological risks, and the lessons to be learned from epidemiological studies. Our second report will address toxicological risks and environmental issues. So far, we conclude that risks from radiation are low for most soldiers on the battlefield, and for civilians who later return to the area. However, there are uncertainties about the maximal levels of exposure to depleted uranium on the battlefield, and there may be circumstances in which a few soldiers are exposed to levels of depleted uranium that result in a significant risk to health. Further studies are needed to determine the levels of exposure to depleted uranium that might occur on the battlefield and to judge whether such higher risks are likely to occur in practice

ORNL necessary and sufficient standards for environment, safety, and health. Final report of the Identification Team for other industrial, radiological, and non-radiological hazard facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

This Necessary and Sufficient (N and S) set of standards is for Other Industrial, Radiological, and Non-Radiological Hazard Facilities at Oak Ridge National Laboratory (ORNL). These facility classifications are based on a laboratory-wide approach to classify facilities by hazard category. An analysis of the hazards associated with the facilities at ORNL was conducted in 1993. To identify standards appropriate for these Other Industrial, Radiological, and Non-Radiological Hazard Facilities, the activities conducted in these facilities were assessed, and the hazards associated with the activities were identified. A preliminary hazards list was distributed to all ORNL organizations. The hazards identified in prior hazard analyses are contained in the list, and a category of other was provided in each general hazard area. A workshop to assist organizations in properly completing the list was held. Completed hazard screening lists were compiled for each ORNL division, and a master list was compiled for all Other Industrial, Radiological Hazard, and Non-Radiological facilities and activities. The master list was compared against the results of prior hazard analyses by research and development and environment, safety, and health personnel to ensure completeness. This list, which served as a basis for identifying applicable environment, safety, and health standards, appears in Appendix A.

ORNL necessary and sufficient standards for environment, safety, and health. Final report of the Identification Team for other industrial, radiological, and non-radiological hazard facilities

International Nuclear Information System (INIS)

1998-07-01

This Necessary and Sufficient (N and S) set of standards is for Other Industrial, Radiological, and Non-Radiological Hazard Facilities at Oak Ridge National Laboratory (ORNL). These facility classifications are based on a laboratory-wide approach to classify facilities by hazard category. An analysis of the hazards associated with the facilities at ORNL was conducted in 1993. To identify standards appropriate for these Other Industrial, Radiological, and Non-Radiological Hazard Facilities, the activities conducted in these facilities were assessed, and the hazards associated with the activities were identified. A preliminary hazards list was distributed to all ORNL organizations. The hazards identified in prior hazard analyses are contained in the list, and a category of other was provided in each general hazard area. A workshop to assist organizations in properly completing the list was held. Completed hazard screening lists were compiled for each ORNL division, and a master list was compiled for all Other Industrial, Radiological Hazard, and Non-Radiological facilities and activities. The master list was compared against the results of prior hazard analyses by research and development and environment, safety, and health personnel to ensure completeness. This list, which served as a basis for identifying applicable environment, safety, and health standards, appears in Appendix A

Travelers' Health: Animal-Associated Hazards

Science.gov (United States)

... Chapter 2 - Safety & Security Chapter 2 - Environmental Hazards Animal-Associated Hazards Heather Bair-Brake, Ryan M. Wallace, G. Gale Galland, Nina Marano HUMAN INTERACTION WITH ANIMALS: A RISK FACTOR FOR INJURY AND ILLNESS Animals, ...

Final Hazard Classification and Auditable Safety Analysis for the 105-F Building Interim Safe Storage Project

International Nuclear Information System (INIS)

Rodovsky, T.J.; Bond, S.L.

1998-07-01

The auditable safety analysis (ASA) documents the authorization basis for the partial decommissioning and facility modifications to place the 105-F Building into interim safe storage (ISS). Placement into the ISS is consistent with the preferred alternative identified in the Record of Decision (58 FR). Modifications will reduce the potential for release and worker exposure to hazardous and radioactive materials, as well as lower surveillance and maintenance (S ampersand M) costs. This analysis includes the following: A description of the activities to be performed in the course of the 105-F Building ISS Project. An assessment of the inventory of radioactive and other hazardous materials within the 105-F Building. Identification of the hazards associated with the activities of the 105-F Building ISS Project. Identification of internally and externally initiated accident scenarios with the potential to produce significant local or offsite consequences during the 105-F Building ISS Project. Bounding evaluation of the consequences of the potentially significant accident scenarios. Hazard classification based on the bounding consequence evaluation. Associated safety function and controls, including commitments. Radiological and other employee safety and health considerations

An approach for balancing health and ecological risks at hazardous waste sites

International Nuclear Information System (INIS)

Suter, G.W. II; Hull, R.N.; Stack, M.; Cornaby, B.W.; Hadden, C.T.; Zafran, F.A.

1995-01-01

Human health and ecological risks must be balanced at hazardous waste sites in order to ensure that remedial actions prevent unacceptable risks of either type. Actions that are designed to protect humans may fail to protect nonhuman populations and ecosystems or may damage ecosystems. However, there is no common scale of health and ecological risk that would allow comparisons to be performed. This paper presents an approach to addressing this problem based on classifying all risks (i.e., health and ecological risks due contaminants and remediation) as insignificant (de minimis), highly significant (de manifestis), or intermediate. For health risks the classification is based on standard criteria. However, in the absence of national guidance concerning the acceptability of ecological risks, new ecological criteria are proposed based on an analysis of regulatory precedents. Matrices and flow charts are presented to guide the use of these risk categories in remedial decision making. The assessment of mercury contamination of the East Fork Poplar Creek is presented as an example of the implementation of the approach. 15 refs., 3 figs., 3 tabs

The role of health and safety experts in the management of hazardous and toxic wastes in Indonesia

Science.gov (United States)

Supriyadi; Hadiyanto

2018-02-01

Occupational Safety and Health Experts in Indonesia have an important role in integrating environmental health and safety factors, including in this regard as human resources assigned to undertake hazardous waste management. Comprehensive knowledge and competence skills need to be carried out responsibly, as an inherent professional occupational safety and health profession. Management leaders should continue to provide training in external agencies responsible for science in the management of toxic waste to enable occupational safety and health experts to improve their performance in the hierarchy of control over the presence of hazardous materials. This paper provides an overview of what strategies and competencies the Occupational Safety and Health expert needs to have in embracing hazardous waste management practices.

Assessment of occupational health and safety hazard exposures among working college students.

Science.gov (United States)

Balanay, Jo Anne G; Adesina, Adepeju; Kearney, Gregory D; Richards, Stephanie L

2014-01-01

Adolescents and young adults have higher injury rates than their adult counterparts in similar jobs. This study used the working college student population to assess health and safety hazards in the workplace, characterize related occupational diseases and injuries, and describe worker health/safety activities provided by employers. College students (≥17 years old) were assessed via online surveys about work history, workplace exposure to hazards, occupational diseases/injuries, and workplace health/safety activities. Approximately half (51%) of participants (n = 1,147) were currently employed at the time of the survey or had been employed while enrolled in college. Restaurants (other than fast food) were the most frequently reported work setting. The most reported workplace hazards included noise exposure and contact with hot liquids/surfaces. Twenty percent of working students experienced injury at work; some injuries were severe enough to limit students' normal activities for >3 days (30%) or require medical attention (44%). Men had significantly higher prevalence of injuries (P = 0.05) and near-misses (P safety training and half were given personal protective equipment (PPE) by their employers. Risk reduction from workplace injuries and illnesses among working college students may be achieved by implementing occupational health and safety (OHS) strategies including incorporation of OHS in the college curriculum, promotion of OHS by university/college student health services, and improving awareness of OHS online resources among college students, employers, and educators. © 2013 Wiley Periodicals, Inc.

Decision support for risk prioritisation of environmental health hazards in a UK city.

Science.gov (United States)

Woods, Mae; Crabbe, Helen; Close, Rebecca; Studden, Mike; Milojevic, Ai; Leonardi, Giovanni; Fletcher, Tony; Chalabi, Zaid

2016-03-08

There is increasing appreciation of the proportion of the health burden that is attributed to modifiable population exposure to environmental health hazards. To manage this avoidable burden in the United Kingdom (UK), government policies and interventions are implemented. In practice, this procedure is interdisciplinary in action and multi-dimensional in context. Here, we demonstrate how Multi Criteria Decision Analysis (MCDA) can be used as a decision support tool to facilitate priority setting for environmental public health interventions within local authorities. We combine modelling and expert elicitation to gather evidence on the impacts and ranking of interventions. To present the methodology, we consider a hypothetical scenario in a UK city. We use MCDA to evaluate and compare the impact of interventions to reduce the health burden associated with four environmental health hazards and rank them in terms of their overall performance across several criteria. For illustrative purposes, we focus on heavy goods vehicle controls to reduce outdoor air pollution, remediation to control levels of indoor radon, carbon monoxide and fitting alarms, and encouraging cycling to target the obesogenic environment. Regional data was included as model evidence to construct a ratings matrix for the city. When MCDA is performed with uniform weights, the intervention of heavy goods vehicle controls to reduce outdoor air pollution is ranked the highest. Cycling and the obesogenic environment is ranked second. We argue that a MCDA based approach provides a framework to guide environmental public health decision makers. This is demonstrated through an online interactive MCDA tool. We conclude that MCDA is a transparent tool that can be used to compare the impact of alternative interventions on a set of pre-defined criteria. In our illustrative example, we ranked the best intervention across the equally weighted selected criteria out of the four alternatives. Further work is needed

Development of probabilistic seismic hazard analysis for international sites, challenges and guidelines

Energy Technology Data Exchange (ETDEWEB)

Fernandez Ares, Antonio, E-mail: antonio.fernandez@rizzoassoc.com [Paul C. Rizzo Associates, Inc., 500 Penn Center Boulevard, Penn Center East, Suite 100, Pittsburgh, PA 15235 (United States); Fatehi, Ali, E-mail: ali.fatehi@rizzoassoc.com [Paul C. Rizzo Associates, Inc., 500 Penn Center Boulevard, Penn Center East, Suite 100, Pittsburgh, PA 15235 (United States)

2013-06-15

Research highlights: ► Site-specific seismic hazard study and suggestions for overcoming those challenges that are inherent to the significant amounts of epistemic uncertainty for sites at remote locations. ► Main aspects of probabilistic seismic hazard analysis (PSHA). ► Regional and site geology in the context of a probabilistic seismic hazard analysis (PSHA), including state-of-the-art ground motion estimation methods, and geophysical conditions. ► Senior seismic hazard analysis (SSHAC) as a mean to incorporate the opinions and contributions of the informed scientific community. -- Abstract: This article provides guidance to conduct a site-specific seismic hazard study, giving suggestions for overcoming those challenges that are inherent to the significant amounts of epistemic uncertainty for sites at remote locations. The text follows the general process of a seismic hazard study, describing both the deterministic and probabilistic approaches. Key and controversial items are identified in the areas of recorded seismicity, seismic sources, magnitude, ground motion models, and local site effects. A case history corresponding to a seismic hazard study in the Middle East for a Greenfield site in a remote location is incorporated along the development of the recommendations. Other examples of analysis case histories throughout the World are presented as well.

Controlling organic chemical hazards in food manufacturing: a hazard analysis critical control points (HACCP) approach.

Science.gov (United States)

Ropkins, K; Beck, A J

2002-08-01

Hazard analysis by critical control points (HACCP) is a systematic approach to the identification, assessment and control of hazards. Effective HACCP requires the consideration of all hazards, i.e., chemical, microbiological and physical. However, to-date most 'in-place' HACCP procedures have tended to focus on the control of microbiological and physical food hazards. In general, the chemical component of HACCP procedures is either ignored or limited to applied chemicals, e.g., food additives and pesticides. In this paper we discuss the application of HACCP to a broader range of chemical hazards, using organic chemical contaminants as examples, and the problems that are likely to arise in the food manufacturing sector. Chemical HACCP procedures are likely to result in many of the advantages previously identified for microbiological HACCP procedures: more effective, efficient and economical than conventional end-point-testing methods. However, the high costs of analytical monitoring of chemical contaminants and a limited understanding of formulation and process optimisation as means of controlling chemical contamination of foods are likely to prevent chemical HACCP becoming as effective as microbiological HACCP.

A Bimodal Hybrid Model for Time-Dependent Probabilistic Seismic Hazard Analysis

Science.gov (United States)

Yaghmaei-Sabegh, Saman; Shoaeifar, Nasser; Shoaeifar, Parva

2018-03-01

The evaluation of evidence provided by geological studies and historical catalogs indicates that in some seismic regions and faults, multiple large earthquakes occur in cluster. Then, the occurrences of large earthquakes confront with quiescence and only the small-to-moderate earthquakes take place. Clustering of large earthquakes is the most distinguishable departure from the assumption of constant hazard of random occurrence of earthquakes in conventional seismic hazard analysis. In the present study, a time-dependent recurrence model is proposed to consider a series of large earthquakes that occurs in clusters. The model is flexible enough to better reflect the quasi-periodic behavior of large earthquakes with long-term clustering, which can be used in time-dependent probabilistic seismic hazard analysis with engineering purposes. In this model, the time-dependent hazard results are estimated by a hazard function which comprises three parts. A decreasing hazard of last large earthquake cluster and an increasing hazard of the next large earthquake cluster, along with a constant hazard of random occurrence of small-to-moderate earthquakes. In the final part of the paper, the time-dependent seismic hazard of the New Madrid Seismic Zone at different time intervals has been calculated for illustrative purpose.

Hazard screening application guide. Safety Analysis Report Update Program

Energy Technology Data Exchange (ETDEWEB)

None

1992-06-01

The basic purpose of hazard screening is to group precesses, facilities, and proposed modifications according to the magnitude of their hazards so as to determine the need for and extent of follow on safety analysis. A hazard is defined as a material, energy source, or operation that has the potential to cause injury or illness in human beings. The purpose of this document is to give guidance and provide standard methods for performing hazard screening. Hazard screening is applied to new and existing facilities and processes as well as to proposed modifications to existing facilities and processes. The hazard screening process evaluates an identified hazards in terms of the effects on people, both on-site and off-site. The process uses bounding analyses with no credit given for mitigation of an accident with the exception of certain containers meeting DOT specifications. The process is restricted to human safety issues only. Environmental effects are addressed by the environmental program. Interfaces with environmental organizations will be established in order to share information.

Optimal health insurance contract : can moral hazard increase indemnity ?

OpenAIRE

Bien, Franck; Alary, David

2006-01-01

In this note, we generalize the results obtained by Barday and Lesur (2005) by considering a bivariated non separable utility function. We characterize optimal health insurance contracts. Moreover, we show that under moral hazard a sufficiently high risk aversion implies that the optimal coverage and the optimal preventive effort are higher than with perfect information.

Basic Versus Supplementary Health Insurance : Moral Hazard and Adverse Selection

NARCIS (Netherlands)

Boone, J.

2014-01-01

This paper introduces a tractable model of health insurance with both moral hazard and adverse selection. We show that government sponsored universal basic insurance should cover treatments with the biggest adverse selection problems. Treatments not covered by basic insurance can be covered on the

Basic versus supplementary health insurance : Moral hazard and adverse selection

NARCIS (Netherlands)

Boone, J.

This paper introduces a tractable model of health insurance with both moral hazard and adverse selection. We show that government sponsored universal basic insurance should cover treatments with the biggest adverse selection problems. Treatments not covered by basic insurance can be covered on the

Seismic hazard assessment of the Province of Murcia (SE Spain): analysis of source contribution to hazard

Science.gov (United States)

García-Mayordomo, J.; Gaspar-Escribano, J. M.; Benito, B.

2007-10-01

A probabilistic seismic hazard assessment of the Province of Murcia in terms of peak ground acceleration (PGA) and spectral accelerations [SA( T)] is presented in this paper. In contrast to most of the previous studies in the region, which were performed for PGA making use of intensity-to-PGA relationships, hazard is here calculated in terms of magnitude and using European spectral ground-motion models. Moreover, we have considered the most important faults in the region as specific seismic sources, and also comprehensively reviewed the earthquake catalogue. Hazard calculations are performed following the Probabilistic Seismic Hazard Assessment (PSHA) methodology using a logic tree, which accounts for three different seismic source zonings and three different ground-motion models. Hazard maps in terms of PGA and SA(0.1, 0.2, 0.5, 1.0 and 2.0 s) and coefficient of variation (COV) for the 475-year return period are shown. Subsequent analysis is focused on three sites of the province, namely, the cities of Murcia, Lorca and Cartagena, which are important industrial and tourism centres. Results at these sites have been analysed to evaluate the influence of the different input options. The most important factor affecting the results is the choice of the attenuation relationship, whereas the influence of the selected seismic source zonings appears strongly site dependant. Finally, we have performed an analysis of source contribution to hazard at each of these cities to provide preliminary guidance in devising specific risk scenarios. We have found that local source zones control the hazard for PGA and SA( T ≤ 1.0 s), although contribution from specific fault sources and long-distance north Algerian sources becomes significant from SA(0.5 s) onwards.

[Application of occupational hazard risk index model in occupational health risk assessment in a decorative coating manufacturing enterprises].

Science.gov (United States)

He, P L; Zhao, C X; Dong, Q Y; Hao, S B; Xu, P; Zhang, J; Li, J G

2018-01-20

Objective: To evaluate the occupational health risk of decorative coating manufacturing enterprises and to explore the applicability of occupational hazard risk index model in the health risk assessment, so as to provide basis for the health management of enterprises. Methods: A decorative coating manufacturing enterprise in Hebei Province was chosen as research object, following the types of occupational hazards and contact patterns, the occupational hazard risk index model was used to evaluate occupational health risk factors of occupational hazards in the key positions of the decorative coating manufacturing enterprise, and measured with workplace test results and occupational health examination. Results: The positions of oily painters, water-borne painters, filling workers and packers who contacted noise were moderate harm. And positions of color workers who contacted chromic acid salts, oily painters who contacted butyl acetate were mild harm. Other positions were harmless. The abnormal rate of contacting noise in physical examination results was 6.25%, and the abnormality was not checked by other risk factors. Conclusion: The occupational hazard risk index model can be used in the occupational health risk assessment of decorative coating manufacturing enterprises, and noise was the key harzard among occupational harzards in this enterprise.

Probabilistic Seismic Hazard Analysis for Yemen

Directory of Open Access Journals (Sweden)

Rakesh Mohindra

2012-01-01

Full Text Available A stochastic-event probabilistic seismic hazard model, which can be used further for estimates of seismic loss and seismic risk analysis, has been developed for the territory of Yemen. An updated composite earthquake catalogue has been compiled using the databases from two basic sources and several research publications. The spatial distribution of earthquakes from the catalogue was used to define and characterize the regional earthquake source zones for Yemen. To capture all possible scenarios in the seismic hazard model, a stochastic event set has been created consisting of 15,986 events generated from 1,583 fault segments in the delineated seismic source zones. Distribution of horizontal peak ground acceleration (PGA was calculated for all stochastic events considering epistemic uncertainty in ground-motion modeling using three suitable ground motion-prediction relationships, which were applied with equal weight. The probabilistic seismic hazard maps were created showing PGA and MSK seismic intensity at 10% and 50% probability of exceedance in 50 years, considering local soil site conditions. The resulting PGA for 10% probability of exceedance in 50 years (return period 475 years ranges from 0.2 g to 0.3 g in western Yemen and generally is less than 0.05 g across central and eastern Yemen. The largest contributors to Yemen’s seismic hazard are the events from the West Arabian Shield seismic zone.

Critical asset and portfolio risk analysis: an all-hazards framework.

Science.gov (United States)

Ayyub, Bilal M; McGill, William L; Kaminskiy, Mark

2007-08-01

This article develops a quantitative all-hazards framework for critical asset and portfolio risk analysis (CAPRA) that considers both natural and human-caused hazards. Following a discussion on the nature of security threats, the need for actionable risk assessments, and the distinction between asset and portfolio-level analysis, a general formula for all-hazards risk analysis is obtained that resembles the traditional model based on the notional product of consequence, vulnerability, and threat, though with clear meanings assigned to each parameter. Furthermore, a simple portfolio consequence model is presented that yields first-order estimates of interdependency effects following a successful attack on an asset. Moreover, depending on the needs of the decisions being made and available analytical resources, values for the parameters in this model can be obtained at a high level or through detailed systems analysis. Several illustrative examples of the CAPRA methodology are provided.

Hazardous Waste

Science.gov (United States)

... chemicals can still harm human health and the environment. When you throw these substances away, they become hazardous waste. Some hazardous wastes come from products in our homes. Our garbage can include such hazardous wastes as old batteries, bug spray cans and paint thinner. U.S. residents ...

The effects of prioritize inspections on occupational health hazards control in workplaces in Iran.

Science.gov (United States)

Sadeghi, Fatemah; Bahrami, Abdolrahman; Fatemi, Farin

2014-01-01

Iran, a newly industrializing country in Middle East, has a workforce of 25 million people. Most employees are working in agriculture, manufacturing, services, construction, commerce sectors, carpet weaving and mining. This article aims to explore the improvement of occupational harmful agents in workplaces due to implement "prioritize inspections". In 2012, the system of "prioritize inspections "was defined for surveillance on enterprises replace of routine inspection. From this system, the enterprises classified on four groups based on health hazards and enterprises with high risk were under more surveillance. The information about each enterprise was collected by health centers, in five provinces and reported by a recommended form to Centre of Environmental and Occupational Health (CEOH). At this program, the inspections from high and medium hazards were increased in all of provinces. The results showed there was a significant difference between the control of health hazards in before and after beginning of "prioritize inspections"(P=0.048). The control of noise, fumes and providing of proper illumination increased from 8 to 10%, 9 to 9.5%, 12.9 to 15.4%, respectively, at under study provinces in 2012 compared to 2011. The surveillance based on "prioritize inspections" increased the quality of occupational health inspections that causes to prevent occupational health diseases.

Hazard Analysis of Software Requirements Specification for Process Module of FPGA-based Controllers in NPP

Energy Technology Data Exchange (ETDEWEB)

Jung; Sejin; Kim, Eui-Sub; Yoo, Junbeom [Konkuk University, Seoul (Korea, Republic of); Keum, Jong Yong; Lee, Jang-Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

Software in PLC, FPGA which are used to develop I and C system also should be analyzed to hazards and risks before used. NUREG/CR-6430 proposes the method for performing software hazard analysis. It suggests analysis technique for software affected hazards and it reveals that software hazard analysis should be performed with the aspects of software life cycle such as requirements analysis, design, detailed design, implements. It also provides the guide phrases for applying software hazard analysis. HAZOP (Hazard and operability analysis) is one of the analysis technique which is introduced in NUREG/CR-6430 and it is useful technique to use guide phrases. HAZOP is sometimes used to analyze the safety of software. Analysis method of NUREG/CR-6430 had been used in Korea nuclear power plant software for PLC development. Appropriate guide phrases and analysis process are selected to apply efficiently and NUREG/CR-6430 provides applicable methods for software hazard analysis is identified in these researches. We perform software hazard analysis of FPGA software requirements specification with two approaches which are NUREG/CR-6430 and HAZOP with using general GW. We also perform the comparative analysis with them. NUREG/CR-6430 approach has several pros and cons comparing with the HAZOP with general guide words and approach. It is enough applicable to analyze the software requirements specification of FPGA.

Historical analysis of US pipeline accidents triggered by natural hazards

Science.gov (United States)

Girgin, Serkan; Krausmann, Elisabeth

2015-04-01

Natural hazards, such as earthquakes, floods, landslides, or lightning, can initiate accidents in oil and gas pipelines with potentially major consequences on the population or the environment due to toxic releases, fires and explosions. Accidents of this type are also referred to as Natech events. Many major accidents highlight the risk associated with natural-hazard impact on pipelines transporting dangerous substances. For instance, in the USA in 1994, flooding of the San Jacinto River caused the rupture of 8 and the undermining of 29 pipelines by the floodwaters. About 5.5 million litres of petroleum and related products were spilled into the river and ignited. As a results, 547 people were injured and significant environmental damage occurred. Post-incident analysis is a valuable tool for better understanding the causes, dynamics and impacts of pipeline Natech accidents in support of future accident prevention and mitigation. Therefore, data on onshore hazardous-liquid pipeline accidents collected by the US Pipeline and Hazardous Materials Safety Administration (PHMSA) was analysed. For this purpose, a database-driven incident data analysis system was developed to aid the rapid review and categorization of PHMSA incident reports. Using an automated data-mining process followed by a peer review of the incident records and supported by natural hazard databases and external information sources, the pipeline Natechs were identified. As a by-product of the data-collection process, the database now includes over 800,000 incidents from all causes in industrial and transportation activities, which are automatically classified in the same way as the PHMSA record. This presentation describes the data collection and reviewing steps conducted during the study, provides information on the developed database and data analysis tools, and reports the findings of a statistical analysis of the identified hazardous liquid pipeline incidents in terms of accident dynamics and

Review of comparative studies of health hazards associated with electric power generation

International Nuclear Information System (INIS)

Paskievici, W.

1982-01-01

Twenty comparative studies on health hazards associated with different methods of energy production were reviewed in order to highlight the methodological problems which are characteristic of this type of study and attempt to bring the results obtained closer together by using a more consistent methodological approach. The main conceptual difficulties lie in the delineation of the boundaries of a fuel cycle, the choice of technologies, dose-effect relationships and health hazard estimates, and in finding equivalent values in the case of real and hypothetical risks and of present and future risks. Practical limitations in predicting the number and gravity of illnesses and accidents both in workers and the population were also reviewed. The health effects associated with the coal, oil, natural gas and uranium cycles were estimated with the following assumptions: exclusion of risks associated with non-fuel resources, use of advanced technologies, use of linear non-threshold dose-effect relationships, exclusion of hypothetical accidents and exclusion or discounting to present worth of long-term risks (>500 years). It can be concluded from these calculations that the health hazards from all the energy sources considered are relatively low and therefore acceptable, natural gas being the safest source followed by uranium, oil and coal in that order. The uncertainty factors are discussed and methods to improve the results are proposed. It is also shown that the radiological risks to workers in the PHWR cycle are approximately half those of the LWR cycle. (author)

Implications of the Fukushima Nuclear Disaster: Man-Made Hazards, Vulnerability Factors, and Risk to Environmental Health.

Science.gov (United States)

Eddy, Christopher; Sase, Eriko

2015-01-01

The objective of this article was to examine the environmental health implications of the 2011 Fukushima nuclear disaster from an all-hazards perspective. The authors performed a literature review that included Japanese and international nuclear guidance and policy, scientific papers, and reports on the Chernobyl and Three Mile Island disasters while also considering all-hazards preparedness rubrics in the U.S. The examination of the literature resulted in the following: a) the authors' "All-Hazards Planning Reference Model" that distinguishes three planning categories-Disaster Trigger Event, Man-Made Hazards, and Vulnerability Factors; b) the generalization of their model to other countries; and c) advocacy for environmental health end fate to be considered in planning phases to minimize risk to environmental health. This article discusses inconsistencies in disaster planning and nomenclature existing in the studied materials and international guidance and proposes new opportunity for developing predisaster risk assessment, risk communication, and prevention capacity building.

Hazard analysis critical control point (HACCP) in public catering services: a modified method, combined to bacteriologic assay.

Science.gov (United States)

Ferrari, P

1992-01-01

During 1990 and 1991 the Veterinary and Public Health Services of USL 35 of Ravenna carried out a research programme aimed at the control of food-borne diseases in the sector of public catering services, in collaboration with the Public Health Laboratory (Presidio Multizonale di Prevenzione). The objectives were: obtaining sure information about health hazards in public catering services; checking structural characteristics and equipment of workrooms in restaurants, hotels and refectories; verifying food preparation and preservation methods; promoting health education to increase employees' awareness of hygiene-related problems. The first objective, evaluation of the level of the control of the workrooms exerted on the food contamination hazard by pathogenic or potentially pathogenic organisms, was carried out by allotting specific scores to several characteristics of laboratories or workers' habits, as suggested by the "Hazard Analysis Critical Control Point" (HACCP) method for butcher's shops and fish markets. Five hundred ninety-eight public catering service units have been inspected in restaurants, hotels, school-refectories, factories, hospitals and social houses; 2,097 bacteriological examinations by agar-contact plates and swabs were carried out; 118 preserved-food temperatures were measured, especially in deep-frozen and cooked food; 70 food specimens were tested to search for Salmonella spp. and Staphylococcus aureus and measure Total Aerobic Mesophilic Weight. The presence of Enterobacteriaceae and Escherichia coli was also tested.

Flood Hazard and Risk Analysis in Urban Area

Science.gov (United States)

Huang, Chen-Jia; Hsu, Ming-hsi; Teng, Wei-Hsien; Lin, Tsung-Hsien

2017-04-01

Typhoons always induce heavy rainfall during summer and autumn seasons in Taiwan. Extreme weather in recent years often causes severe flooding which result in serious losses of life and property. With the rapid industrial and commercial development, people care about not only the quality of life, but also the safety of life and property. So the impact of life and property due to disaster is the most serious problem concerned by the residents. For the mitigation of the disaster impact, the flood hazard and risk analysis play an important role for the disaster prevention and mitigation. In this study, the vulnerability of Kaohsiung city was evaluated by statistics of social development factor. The hazard factors of Kaohsiung city was calculated by simulated flood depth of six different return periods and four typhoon events which result in serious flooding in Kaohsiung city. The flood risk can be obtained by means of the flood hazard and social vulnerability. The analysis results provide authority to strengthen disaster preparedness and to set up more resources in high risk areas.

Risk-based consequences of extreme natural hazard processes in mountain regions - Multi-hazard analysis in Tyrol (Austria)

Science.gov (United States)

Huttenlau, Matthias; Stötter, Johann

2010-05-01

weighting within the risk concept, this has sufficient implications on the results of risk analyses. Thus, an equal and scale appropriated balance of those risk components is a fundamental key factor for effective natural hazard risk analyses. The results of such analyses inform especially decision makers in the insurance industry, the administration, and politicians on potential consequences and are the basis for appropriate risk management strategies. Thereby, results (i) on an annual or probabilistic risk comprehension have to be distinguished from (ii) scenario-based analyses. The first analyses are based on statistics of periodically or episodically occurring events whereas the latter approach is especially applied for extreme, non-linear, stochastic events. Focusing on the needs especially of insurance companies, the first approaches are appropriate for premium pricing and reinsurance strategies with an annual perspective, whereas the latter is focusing on events with extreme loss burdens under worst-case criteria to guarantee accordant reinsurance coverage. Moreover, the demand of adequate loss model approaches and methods is strengthened by the risk-based requirements of the upcoming capital requirement directive Solvency II. The present study estimates the potential elements at risk, their corresponding damage potentials and the Probable Maximum Losses (PMLs) of extreme natural hazards events in Tyrol (Austria) and considers adequatly the scale dependency and balanced application of the introduced risk components. Beside the introduced analysis an additionally portfolio analysis of a regional insurance company was executed. The geocoded insurance contracts of this portfolio analysis were the basis to estimate spatial, socio-economical and functional differentiated mean insurance values for the different risk categories of (i) buildings, (ii) contents or inventory, (iii) vehicles, and (iv) persons in the study area. The estimated mean insurance values were

an investigation of the health hazards of some of the chemical ...

African Journals Online (AJOL)

Temechegn

This short piece takes a limited look at the health hazards of the chemical contents of ... With this in mind, the researchers purchased all the powdered fruit juices sold in ... Administration (FDA) or some other regulatory body for low toxicity, ...

Process hazards analysis (PrHA) program, bridging accident analyses and operational safety

International Nuclear Information System (INIS)

Richardson, J.A.; McKernan, S.A.; Vigil, M.J.

2003-01-01

Recently the Final Safety Analysis Report (FSAR) for the Plutonium Facility at Los Alamos National Laboratory, Technical Area 55 (TA-55) was revised and submitted to the US. Department of Energy (DOE). As a part of this effort, over seventy Process Hazards Analyses (PrHAs) were written and/or revised over the six years prior to the FSAR revision. TA-55 is a research, development, and production nuclear facility that primarily supports US. defense and space programs. Nuclear fuels and material research; material recovery, refining and analyses; and the casting, machining and fabrication of plutonium components are some of the activities conducted at TA-35. These operations involve a wide variety of industrial, chemical and nuclear hazards. Operational personnel along with safety analysts work as a team to prepare the PrHA. PrHAs describe the process; identi fy the hazards; and analyze hazards including determining hazard scenarios, their likelihood, and consequences. In addition, the interaction of the process to facility systems, structures and operational specific protective features are part of the PrHA. This information is rolled-up to determine bounding accidents and mitigating systems and structures. Further detailed accident analysis is performed for the bounding accidents and included in the FSAR. The FSAR is part of the Documented Safety Analysis (DSA) that defines the safety envelope for all facility operations in order to protect the worker, the public, and the environment. The DSA is in compliance with the US. Code of Federal Regulations, 10 CFR 830, Nuclear Safety Management and is approved by DOE. The DSA sets forth the bounding conditions necessary for the safe operation for the facility and is essentially a 'license to operate.' Safely of day-to-day operations is based on Hazard Control Plans (HCPs). Hazards are initially identified in the PrI-IA for the specific operation and act as input to the HCP. Specific protective features important to worker

Probabilistic earthquake hazard analysis for Cairo, Egypt

Science.gov (United States)

Badawy, Ahmed; Korrat, Ibrahim; El-Hadidy, Mahmoud; Gaber, Hanan

2016-04-01

Cairo is the capital of Egypt and the largest city in the Arab world and Africa, and the sixteenth largest metropolitan area in the world. It was founded in the tenth century (969 ad) and is 1046 years old. It has long been a center of the region's political and cultural life. Therefore, the earthquake risk assessment for Cairo has a great importance. The present work aims to analysis the earthquake hazard of Cairo as a key input's element for the risk assessment. The regional seismotectonics setting shows that Cairo could be affected by both far- and near-field seismic sources. The seismic hazard of Cairo has been estimated using the probabilistic seismic hazard approach. The logic tree frame work was used during the calculations. Epistemic uncertainties were considered into account by using alternative seismotectonics models and alternative ground motion prediction equations. Seismic hazard values have been estimated within a grid of 0.1° × 0.1 ° spacing for all of Cairo's districts at different spectral periods and four return periods (224, 615, 1230, and 4745 years). Moreover, the uniform hazard spectra have been calculated at the same return periods. The pattern of the contour maps show that the highest values of the peak ground acceleration is concentrated in the eastern zone's districts (e.g., El Nozha) and the lowest values at the northern and western zone's districts (e.g., El Sharabiya and El Khalifa).

The need for the geologic hazard analysis

International Nuclear Information System (INIS)

Mingarro, E.

1984-01-01

The parameters which are considered in the hazard analysis associated with the movements of the Earth Crust are considered. These movements are classified as: fast movements or seismic movements, which are produced in a certain geologic moment at a speed measured in cm/sg, and slow movements or secular movements, which take place within a long span of time at a speed measured by cm/year. The relations space/time are established after Poisson and Gumbel's probabilistic models. Their application is analyzed according to the structural gradient fields, which fall within Matteron's geostatistics studies. These statistic criteria should be analyzed or checked up in each geo-tectonic environment. This allows the definition of neotectonic and seismogenetic zones, because it is only in these zones where the probabilistic or deterministic criteria can be applied to evaluate the hazard and vulnerability, that is, to know the geologic hazard of every ''Uniform'' piece of the Earth Crust. (author)

Seismic hazard analysis for the NTS spent reactor fuel test site

International Nuclear Information System (INIS)

Campbell, K.W.

1980-01-01

An experiment is being directed at the Nevada Test Site to test the feasibility for storage of spent fuel from nuclear reactors in geologic media. As part of this project, an analysis of the earthquake hazard was prepared. This report presents the results of this seismic hazard assessment. Two distinct components of the seismic hazard were addressed: vibratory ground motion and surface displacement

Fire hazards analysis for the uranium oxide (UO3) facility

International Nuclear Information System (INIS)

Wyatt, D.M.

1994-01-01

The Fire Hazards Analysis (FHA) documents the deactivation end-point status of the UO 3 complex fire hazards, fire protection and life safety systems. This FHA has been prepared for the Uranium Oxide Facility by Westinghouse Hanford Company in accordance with the criteria established in DOE 5480.7A, Fire Protection and RLID 5480.7, Fire Protection. The purpose of the Fire Hazards Analysis is to comprehensively and quantitatively assess the risk from a fire within individual fire areas in a Department of Energy facility so as to ascertain whether the objectives stated in DOE Order 5480.7, paragraph 4 are met. Particular attention has been paid to RLID 5480.7, Section 8.3, which specifies the criteria for deactivating fire protection in decommission and demolition facilities

EXPOSURE TO HAZARDOUS SUBSTANCES AND MALE REPRODUCTIVE HEALTH: A RESEARCH FRAMEWORK

Science.gov (United States)

The discovery in the mid-1970s that occupational exposures to pesticides could diminish or destroy the fertility of workers sparked concern about the effects of hazardous substances on male reproductive health. More recently, there is evidence that sperm quantity and quality may ...

Practicality for Software Hazard Analysis for Nuclear Safety I and C System

International Nuclear Information System (INIS)

Kim, Yong-Ho; Moon, Kwon-Ki; Chang, Young-Woo; Jeong, Soo-Hyun

2016-01-01

We are using the concept of system safety in engineering. It is difficult to make any system perfectly safe and probably a complete system may not easily be achieved. The standard definition of a system from MIL-STD- 882E is: “The organization of hardware, software, material, facilities, personnel, data, and services needed to perform a designated function within a stated environment with specified results.” From the perspective of the system safety engineer and the hazard analysis process, software is considered as a subsystem. Regarding hazard analysis, to date, methods for identifying software failures and determining their effects is still a research problem. Since the success of software development is based on rigorous test of hardware and software, it is necessary to check the balance between software test and hardware test, and in terms of efficiency. Lessons learned and experience from similar systems are important for the work of hazard analysis. No major hazard has been issued for the software developed and verified in Korean NPPs. In addition to hazard analysis, software development, and verification and validation were thoroughly performed. It is reasonable that the test implementation including the development of the test case, stress and abnormal conditions, error recovery situations, and high risk hazardous situations play a key role in detecting and preventing software faults

Practicality for Software Hazard Analysis for Nuclear Safety I and C System

Energy Technology Data Exchange (ETDEWEB)

Kim, Yong-Ho; Moon, Kwon-Ki; Chang, Young-Woo; Jeong, Soo-Hyun [KEPCO Engineering and Construction Co., Deajeon (Korea, Republic of)

2016-10-15

We are using the concept of system safety in engineering. It is difficult to make any system perfectly safe and probably a complete system may not easily be achieved. The standard definition of a system from MIL-STD- 882E is: “The organization of hardware, software, material, facilities, personnel, data, and services needed to perform a designated function within a stated environment with specified results.” From the perspective of the system safety engineer and the hazard analysis process, software is considered as a subsystem. Regarding hazard analysis, to date, methods for identifying software failures and determining their effects is still a research problem. Since the success of software development is based on rigorous test of hardware and software, it is necessary to check the balance between software test and hardware test, and in terms of efficiency. Lessons learned and experience from similar systems are important for the work of hazard analysis. No major hazard has been issued for the software developed and verified in Korean NPPs. In addition to hazard analysis, software development, and verification and validation were thoroughly performed. It is reasonable that the test implementation including the development of the test case, stress and abnormal conditions, error recovery situations, and high risk hazardous situations play a key role in detecting and preventing software faults.

Antibiotic, Pesticide, and Microbial Contaminants of Honey: Human Health Hazards

Directory of Open Access Journals (Sweden)

Noori Al-Waili

2012-01-01

Full Text Available Agricultural contamination with pesticides and antibiotics is a challenging problem that needs to be fully addressed. Bee products, such as honey, are widely consumed as food and medicine and their contamination may carry serious health hazards. Honey and other bee products are polluted by pesticides, heavy metals, bacteria and radioactive materials. Pesticide residues cause genetic mutations and cellular degradation and presence of antibiotics might increase resistant human or animal's pathogens. Many cases of infant botulisms have been attributed to contaminated honey. Honey may be very toxic when produced from certain plants. Ingestion of honey without knowing its source and safety might be problematic. Honey should be labeled to explore its origin, composition, and clear statement that it is free from contaminants. Honey that is not subjected for analysis and sterilization should not be used in infants, and should not be applied to wounds or used for medicinal purposes. This article reviews the extent and health impact of honey contamination and stresses on the introduction of a strict monitoring system and validation of acceptable minimal concentrations of pollutants or identifying maximum residue limits for bee products, in particular, honey.

Hazards in the chemical laboratory

International Nuclear Information System (INIS)

Bretherick, L.

1987-01-01

The contents of this book are: Preface; Introduction; Health and Safety at Work Act 1974; Safety Planning and Management; Fire Protection; Reactive Chemical Hazards; Chemical Hazards and Toxicology; Health Care and First Aid; Hazardous Chemicals; Precautions against Radiations; and An American View

Research on the spatial analysis method of seismic hazard for island

International Nuclear Information System (INIS)

Jia, Jing; Jiang, Jitong; Zheng, Qiuhong; Gao, Huiying

2017-01-01

Seismic hazard analysis(SHA) is a key component of earthquake disaster prevention field for island engineering, whose result could provide parameters for seismic design microscopically and also is the requisite work for the island conservation planning’s earthquake and comprehensive disaster prevention planning macroscopically, in the exploitation and construction process of both inhabited and uninhabited islands. The existing seismic hazard analysis methods are compared in their application, and their application and limitation for island is analysed. Then a specialized spatial analysis method of seismic hazard for island (SAMSHI) is given to support the further related work of earthquake disaster prevention planning, based on spatial analysis tools in GIS and fuzzy comprehensive evaluation model. The basic spatial database of SAMSHI includes faults data, historical earthquake record data, geological data and Bouguer gravity anomalies data, which are the data sources for the 11 indices of the fuzzy comprehensive evaluation model, and these indices are calculated by the spatial analysis model constructed in ArcGIS’s Model Builder platform. (paper)

Research on the spatial analysis method of seismic hazard for island

Science.gov (United States)

Jia, Jing; Jiang, Jitong; Zheng, Qiuhong; Gao, Huiying

2017-05-01

Seismic hazard analysis(SHA) is a key component of earthquake disaster prevention field for island engineering, whose result could provide parameters for seismic design microscopically and also is the requisite work for the island conservation planning’s earthquake and comprehensive disaster prevention planning macroscopically, in the exploitation and construction process of both inhabited and uninhabited islands. The existing seismic hazard analysis methods are compared in their application, and their application and limitation for island is analysed. Then a specialized spatial analysis method of seismic hazard for island (SAMSHI) is given to support the further related work of earthquake disaster prevention planning, based on spatial analysis tools in GIS and fuzzy comprehensive evaluation model. The basic spatial database of SAMSHI includes faults data, historical earthquake record data, geological data and Bouguer gravity anomalies data, which are the data sources for the 11 indices of the fuzzy comprehensive evaluation model, and these indices are calculated by the spatial analysis model constructed in ArcGIS’s Model Builder platform.

Application of systems and control theory-based hazard analysis to radiation oncology.

Science.gov (United States)

Pawlicki, Todd; Samost, Aubrey; Brown, Derek W; Manger, Ryan P; Kim, Gwe-Ya; Leveson, Nancy G

2016-03-01

Both humans and software are notoriously challenging to account for in traditional hazard analysis models. The purpose of this work is to investigate and demonstrate the application of a new, extended accident causality model, called systems theoretic accident model and processes (STAMP), to radiation oncology. Specifically, a hazard analysis technique based on STAMP, system-theoretic process analysis (STPA), is used to perform a hazard analysis. The STPA procedure starts with the definition of high-level accidents for radiation oncology at the medical center and the hazards leading to those accidents. From there, the hierarchical safety control structure of the radiation oncology clinic is modeled, i.e., the controls that are used to prevent accidents and provide effective treatment. Using STPA, unsafe control actions (behaviors) are identified that can lead to the hazards as well as causal scenarios that can lead to the identified unsafe control. This information can be used to eliminate or mitigate potential hazards. The STPA procedure is demonstrated on a new online adaptive cranial radiosurgery procedure that omits the CT simulation step and uses CBCT for localization, planning, and surface imaging system during treatment. The STPA procedure generated a comprehensive set of causal scenarios that are traced back to system hazards and accidents. Ten control loops were created for the new SRS procedure, which covered the areas of hospital and department management, treatment design and delivery, and vendor service. Eighty three unsafe control actions were identified as well as 472 causal scenarios that could lead to those unsafe control actions. STPA provides a method for understanding the role of management decisions and hospital operations on system safety and generating process design requirements to prevent hazards and accidents. The interaction of people, hardware, and software is highlighted. The method of STPA produces results that can be used to improve

Human exposure, health hazards, and environmental regulations

International Nuclear Information System (INIS)

Steinemann, Anne

2004-01-01

United States environmental regulations, intended to protect human health, generally fail to address major sources of pollutants that endanger human health. These sources are surprisingly close to us and within our control, such as consumer products and building materials that we use within our homes, workplaces, schools, and other indoor environments. Even though these indoor sources account for nearly 90% of our pollutant exposure, they are virtually unregulated by existing laws. Even pollutant levels found in typical homes, if found outdoors, would often violate federal environmental standards. This article examines the importance of human exposure as a way to understand and reduce effects of pollutants on human health. Results from exposure studies challenge traditional thinking about pollutant hazards, and reveal deficiencies in our patchwork of laws. And results from epidemiological studies, showing increases in exposure-related diseases, underscore the need for new protections. Because we cannot rely solely on regulations to protect us, and because health effects from exposures can develop insidiously, greater efforts are needed to reduce and prevent significant exposures before they occur. Recommendations include the development and use of safer alternatives to common products, public education on ways to reduce exposure, systematic monitoring of human exposure to pollutants, and a precautionary approach in decision-making

Determination of a Quantitative Job Severity Score Value for Health Hazards in Industry

Directory of Open Access Journals (Sweden)

A. Nayebzadeh

2007-09-01

Full Text Available Background and aims   There are numerous types of health hazards in every workplace which threaten the health and well-being of employees. Therefore, various types of engineering and  administrative control approaches have been developed in industry. Control of hazardous agents can be difficult in most conditions due to economical and technical limitations. However, certain types of administrative control methods can be implemented in these cases instead of engineering or process controls. Since creating a safe environment with zero chance of occupational exposures to hazardous agents is practically impossible, it can be expected that every employee may have a certain level of exposure to one or more of hazardous agents. The probability and extent of these  exposures will depend on job's demands or work environment's conditions. Under this condition,  a "job severity score" as a quantitative value can be determined in order to choose and employ the  best possible control methodology and also to create a long-term occupational health plan.   Methods   In this study, the main goal is to develop a questionnaire as a model for assessment of job severity and tasks harmfulness. This questionnaire has five sections in which there are numbers  of questions each with a specified quantitative score.  These scores have been identified according to the brainstorming among the some experienced  experts in the fields safety, occupational health, and industrial psychology. When the final  questionnaire was completed, two well-known industrial sectors were selected as pilot plants for final verification of questionnaire in order to obtain valid questions.    Results & Conclusion   The result of this study was providing a questionnaire which might be used in similar studies for determination of job severity level at any industrial plants.

Chernobyl - an evaluation of health hazards. 3. enl. and rev. ed.

International Nuclear Information System (INIS)

Huber, E.E.; Dersee, T.; Iwert, B.

1986-01-01

The pamphlet abstracted contains some general information about the radiation hazards and health risks of nuclear power plants. The consequences of the Chernobyl reactor accident are dealt with by way of summarizing the events and by evaluating the health risks and damage the public should be prepared for. This topical report is completed by a popular presentation of the risks of nuclear power and by definitions of the major terms and measuring units. (DG) [de

Landslide hazards and systems analysis: A Central European perspective

Science.gov (United States)

Klose, Martin; Damm, Bodo; Kreuzer, Thomas

2016-04-01

Part of the problem with assessing landslide hazards is to understand the variable settings in which they occur. There is growing consensus that hazard assessments require integrated approaches that take account of the coupled human-environment system. Here we provide a synthesis of societal exposure and vulnerability to landslide hazards, review innovative approaches to hazard identification, and lay a focus on hazard assessment, while presenting the results of historical case studies and a landslide time series for Germany. The findings add to a growing body of literature that recognizes societal exposure and vulnerability as a complex system of hazard interactions that evolves over time as a function of social change and development. We therefore propose to expand hazard assessments by the framework and concepts of systems analysis (e.g., Liu et al., 2007) Results so far have been promising in ways that illustrate the importance of feedbacks, thresholds, surprises, and time lags in the evolution of landslide hazard and risk. In densely populated areas of Central Europe, landslides often occur in urbanized landscapes or on engineered slopes that had been transformed or created intentionally by human activity, sometimes even centuries ago. The example of Germany enables to correlate the causes and effects of recent landslides with the historical transition of urbanization to urban sprawl, ongoing demographic change, and some chronic problems of industrialized countries today, including ageing infrastructures or rising government debts. In large parts of rural Germany, the combination of ageing infrastructures, population loss, and increasing budget deficits starts to erode historical resilience gains, which brings especially small communities to a tipping point in their efforts to risk reduction. While struggling with budget deficits and demographic change, these communities are required to maintain ageing infrastructures that are particularly vulnerable to

Environmental impact and human health risks of polychlorinated dibenzo-p-dioxins and dibenzofurans in the vicinity of a new hazardous waste incinerator: a case study.

OpenAIRE

Ferré-Huguet, Núria; Nadal, Martí; Schuhmacher, Marta; Domingo, José L.

2006-01-01

KEYWORDS - CLASSIFICATION: adverse effects;analysis;Benzofurans;cancer epidemiology;Dioxins;Environmental Exposure;Environmental Health;Environmental Monitoring;Hazardous Waste;Humans;Incineration;metabolism;Refuse Disposal;Research;Risk Assessment;Spain;Toxicology. The purpose of this study was to assess the environmental impact of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the vicinity of a new hazardous waste incinerator (HWI) 4 years after regular operation of the...

An Independent Evaluation of the FMEA/CIL Hazard Analysis Alternative Study

Science.gov (United States)

Ray, Paul S.

1996-01-01

The present instruments of safety and reliability risk control for a majority of the National Aeronautics and Space Administration (NASA) programs/projects consist of Failure Mode and Effects Analysis (FMEA), Hazard Analysis (HA), Critical Items List (CIL), and Hazard Report (HR). This extensive analytical approach was introduced in the early 1970's and was implemented for the Space Shuttle Program by NHB 5300.4 (1D-2. Since the Challenger accident in 1986, the process has been expanded considerably and resulted in introduction of similar and/or duplicated activities in the safety/reliability risk analysis. A study initiated in 1995, to search for an alternative to the current FMEA/CIL Hazard Analysis methodology generated a proposed method on April 30, 1996. The objective of this Summer Faculty Study was to participate in and conduct an independent evaluation of the proposed alternative to simplify the present safety and reliability risk control procedure.

Occupational health hazards in the interventional laboratory: Time for a safer environment.

Science.gov (United States)

Klein, Lloyd W; Miller, Donald L; Balter, Stephen; Laskey, Warren; Naito, Neil; Haines, David; Ross, Allan; Mauro, Matthew A; Goldstein, James A

2018-01-04

Over the past 30 years, the advent of fluoroscopically guided interventional procedures has resulted in dramatic increments in both X-ray exposure and physical demands that predispose interventionists to distinct occupational health hazards. The hazards of accumulated radiation exposure have been known for years, but until recently the other potential risks have been ill-defined and under-appreciated. The physical stresses inherent in this career choice appear to be associated with a predilection to orthopedic injuries, attributable in great part to the cumulative adverse effects of bearing the weight and design of personal protective apparel worn to reduce radiation risk and to the poor ergonomic design of interventional suites. These occupational health concerns pertain to cardiologists, radiologists and surgeons working with fluoroscopy, pain management specialists performing nonvascular fluoroscopic procedures, and the many support personnel working in these environments. This position paper is the work of representatives of the major societies of physicians who work in the interventional laboratory environment, and has been formally endorsed by all. In this paper, the available data delineating the prevalence of these occupational health risks is reviewed and ongoing epidemiological studies designed to further elucidate these risks are summarized. The main purpose is to publicly state speaking with a single voice that the interventional laboratory poses workplace hazards that must be acknowledged, better understood and mitigated to the greatest extent possible, and to advocate vigorously on behalf of efforts to reduce these hazards. Interventional physicians and their professional societies, working together with industry, should strive toward the ultimate zero radiation exposure work environment that would eliminate the need for personal protective apparel and prevent its orthopedic and ergonomic consequences. © 2008 Wiley-Liss, Inc. Copyright © 2008 Wiley�

GIS risk analysis of hazardous materials transport

International Nuclear Information System (INIS)

Anders, C.; Olsten, J.

1991-01-01

The Geographic Information System (GIS) was used to assess the risks and vulnerability of transporting hazardous materials and wastes (such as gasoline, explosives, poisons, etc) on the Arizona highway system. This paper discusses the methodology that was utilized, and the application of GIS systems to risk analysis problems

Fire Hazards Analysis for the 200 Area Interim Storage Area

International Nuclear Information System (INIS)

JOHNSON, D.M.

2000-01-01

This documents the Fire Hazards Analysis (FHA) for the 200 Area Interim Storage Area. The Interim Storage Cask, Rad-Vault, and NAC-1 Cask are analyzed for fire hazards and the 200 Area Interim Storage Area is assessed according to HNF-PRO-350 and the objectives of DOE Order 5480 7A. This FHA addresses the potential fire hazards associated with the Interim Storage Area (ISA) facility in accordance with the requirements of DOE Order 5480 7A. It is intended to assess the risk from fire to ensure there are no undue fire hazards to site personnel and the public and to ensure property damage potential from fire is within acceptable limits. This FHA will be in the form of a graded approach commensurate with the complexity of the structure or area and the associated fire hazards

Complex analysis of hazards to the man and natural environment due to electricity production in nuclear and coal power plants

International Nuclear Information System (INIS)

Strupczewski, A.

1990-01-01

The report presents a complex analysis of hazards connected with electrical energy production in nuclear power plants and coal power plants, starting with fuel mining, through power plant construction, operation, possible accidents and decommissioning to long term global effects. The comparison is based on contemporary, proven technologies of coal fired power plants and nuclear power plants with pressurized water reactors. The hazards to environment and man due to nuclear power are shown to be much smaller than those due to coal power cycle. The health benefits due to electrical power availability are shown to be much larger than the health losses due to its production. (author). 71 refs, 17 figs, 12 tabs

Hazard function theory for nonstationary natural hazards

Science.gov (United States)

Read, L.; Vogel, R. M.

2015-12-01

Studies from the natural hazards literature indicate that many natural processes, including wind speeds, landslides, wildfires, precipitation, streamflow and earthquakes, show evidence of nonstationary behavior such as trends in magnitudes through time. Traditional probabilistic analysis of natural hazards based on partial duration series (PDS) generally assumes stationarity in the magnitudes and arrivals of events, i.e. that the probability of exceedance is constant through time. Given evidence of trends and the consequent expected growth in devastating impacts from natural hazards across the world, new methods are needed to characterize their probabilistic behavior. The field of hazard function analysis (HFA) is ideally suited to this problem because its primary goal is to describe changes in the exceedance probability of an event over time. HFA is widely used in medicine, manufacturing, actuarial statistics, reliability engineering, economics, and elsewhere. HFA provides a rich theory to relate the natural hazard event series (x) with its failure time series (t), enabling computation of corresponding average return periods and reliabilities associated with nonstationary event series. This work investigates the suitability of HFA to characterize nonstationary natural hazards whose PDS magnitudes are assumed to follow the widely applied Poisson-GP model. We derive a 2-parameter Generalized Pareto hazard model and demonstrate how metrics such as reliability and average return period are impacted by nonstationarity and discuss the implications for planning and design. Our theoretical analysis linking hazard event series x, with corresponding failure time series t, should have application to a wide class of natural hazards.

Hazard function theory for nonstationary natural hazards

Science.gov (United States)

Read, Laura K.; Vogel, Richard M.

2016-04-01

Impact from natural hazards is a shared global problem that causes tremendous loss of life and property, economic cost, and damage to the environment. Increasingly, many natural processes show evidence of nonstationary behavior including wind speeds, landslides, wildfires, precipitation, streamflow, sea levels, and earthquakes. Traditional probabilistic analysis of natural hazards based on peaks over threshold (POT) generally assumes stationarity in the magnitudes and arrivals of events, i.e., that the probability of exceedance of some critical event is constant through time. Given increasing evidence of trends in natural hazards, new methods are needed to characterize their probabilistic behavior. The well-developed field of hazard function analysis (HFA) is ideally suited to this problem because its primary goal is to describe changes in the exceedance probability of an event over time. HFA is widely used in medicine, manufacturing, actuarial statistics, reliability engineering, economics, and elsewhere. HFA provides a rich theory to relate the natural hazard event series (X) with its failure time series (T), enabling computation of corresponding average return periods, risk, and reliabilities associated with nonstationary event series. This work investigates the suitability of HFA to characterize nonstationary natural hazards whose POT magnitudes are assumed to follow the widely applied generalized Pareto model. We derive the hazard function for this case and demonstrate how metrics such as reliability and average return period are impacted by nonstationarity and discuss the implications for planning and design. Our theoretical analysis linking hazard random variable X with corresponding failure time series T should have application to a wide class of natural hazards with opportunities for future extensions.

Hazardous Medical Waste Management as a Public Health Issue

OpenAIRE

Marinković, Natalija; Vitale, Ksenija; Afrić, Ivo; Janev Holcer, Nataša

2005-01-01

The amount of waste produced is connected with the degree of a country’s economic development; more developed countries produce more waste. This paper reviews the quantities, manipulation and treatment methods of medical waste in Croatia, as well as hazardous potentials of medical waste for human health. Medical waste must be collected and sorted in containers suitable for its characteristics, amount, means of transportation and treatment method in order to prevent contact with environment an...

Extending and automating a Systems-Theoretic hazard analysis for requirements generation and analysis.

Energy Technology Data Exchange (ETDEWEB)

Thomas, John (Massachusetts Institute of Technology)

2012-05-01

Systems Theoretic Process Analysis (STPA) is a powerful new hazard analysis method designed to go beyond traditional safety techniques - such as Fault Tree Analysis (FTA) - that overlook important causes of accidents like flawed requirements, dysfunctional component interactions, and software errors. While proving to be very effective on real systems, no formal structure has been defined for STPA and its application has been ad-hoc with no rigorous procedures or model-based design tools. This report defines a formal mathematical structure underlying STPA and describes a procedure for systematically performing an STPA analysis based on that structure. A method for using the results of the hazard analysis to generate formal safety-critical, model-based system and software requirements is also presented. Techniques to automate both the analysis and the requirements generation are introduced, as well as a method to detect conflicts between the safety and other functional model-based requirements during early development of the system.

PRO-ELICERE: A Hazard Analysis Automation Process Applied to Space Systems

Directory of Open Access Journals (Sweden)

Tharcius Augusto Pivetta

2016-07-01

Full Text Available In the last decades, critical systems have increasingly been developed using computers and software even in space area, where the project approach is usually very conservative. In the projects of rockets, satellites and its facilities, like ground support systems, simulators, among other critical operations for the space mission, it must be applied a hazard analysis. The ELICERE process was created to perform a hazard analysis mainly over computer critical systems, in order to define or evaluate its safety and dependability requirements, strongly based on Hazards and Operability Study and Failure Mode and Effect Analysis techniques. It aims to improve the project design or understand the potential hazards of existing systems improving their functions related to functional or non-functional requirements. Then, the main goal of the ELICERE process is to ensure the safety and dependability goals of a space mission. The process, at the beginning, was created to operate manually in a gradual way. Nowadays, a software tool called PRO-ELICERE was developed, in such a way to facilitate the analysis process and store the results for reuse in another system analysis. To understand how ELICERE works and its tool, a small example of space study case was applied, based on a hypothetical rocket of the Cruzeiro do Sul family, developed by the Instituto de Aeronáutica e Espaço in Brazil.

Software hazard analysis for nuclear digital protection system by Colored Petri Net

International Nuclear Information System (INIS)

Bai, Tao; Chen, Wei-Hua; Liu, Zhen; Gao, Feng

2017-01-01

Highlights: •A dynamic hazard analysis method is proposed for the safety-critical software. •The mechanism relies on Colored Petri Net. •Complex interactions between software and hardware are captured properly. •Common failure mode in software are identified effectively. -- Abstract: The software safety of a nuclear digital protection system is critical for the safety of nuclear power plants as any software defect may result in severe damage. In order to ensure the safety and reliability of safety-critical digital system products and their applications, software hazard analysis is required to be performed during the lifecycle of software development. The dynamic software hazard modeling and analysis method based on Colored Petri Net is proposed and applied to the safety-critical control software of the nuclear digital protection system in this paper. The analysis results show that the proposed method can explain the complex interactions between software and hardware and identify the potential common cause failure in software properly and effectively. Moreover, the method can find the dominant software induced hazard to safety control actions, which aids in increasing software quality.

Hazard analysis of typhoon-related external events using extreme value theory

Energy Technology Data Exchange (ETDEWEB)

Kim, Yo Chan; Jang, Seung Cheol [Integrated Safety Assessment Division, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Lim, Tae Jin [Dept. of Industrial Information Systems Engineering, Soongsil University, Seoul (Korea, Republic of)

2015-02-15

After the Fukushima accident, the importance of hazard analysis for extreme external events was raised. To analyze typhoon-induced hazards, which are one of the significant disasters of East Asian countries, a statistical analysis using the extreme value theory, which is a method for estimating the annual exceedance frequency of a rare event, was conducted for an estimation of the occurrence intervals or hazard levels. For the four meteorological variables, maximum wind speed, instantaneous wind speed, hourly precipitation, and daily precipitation, the parameters of the predictive extreme value theory models were estimated. The 100-year return levels for each variable were predicted using the developed models and compared with previously reported values. It was also found that there exist significant long-term climate changes of wind speed and precipitation. A fragility analysis should be conducted to ensure the safety levels of a nuclear power plant for high levels of wind speed and precipitation, which exceed the results of a previous analysis.

Air conditioning systems as non-infectious health hazards inducing acute respiratory symptoms.

Science.gov (United States)

Gerber, Alexander; Fischer, Axel; Willig, Karl-Heinz; Groneberg, David A

2006-04-01

Chronic and acute exposure to toxic aerosols belongs to frequent causes of airway diseases. However, asthma attacks due to long-distance inhalative exposure to organic solvents, transmitted via an air condition system, have not been reported so far. The present case illustrates the possibility of air conditioning systems as non-infectious health hazards in occupational medicine. So far, only infectious diseases such as legionella pneumophila pneumonia have commonly been associated to air-conditioning exposures but physicians should be alert to the potential of transmission of toxic volatile substances via air conditioning systems. In view of the events of the 11th of September 2001 with a growing danger of large building terrorism which may even use air conditioning systems to transmit toxins, facility management security staff should be alerted to possible non-infectious toxic health hazards arising from air-conditioning systems.

Biologically Hazardous Agents at Work and Efforts to Protect Workers' Health: A Review of Recent Reports

Directory of Open Access Journals (Sweden)

Kyung-Taek Rim

2014-06-01

Full Text Available Because information on biological agents in the workplace is lacking, biological hazard analyses at the workplace to securely recognize the harmful factors with biological basis are desperately needed. This review concentrates on literatures published after 2010 that attempted to detect biological hazards to humans, especially workers, and the efforts to protect them against these factors. It is important to improve the current understanding of the health hazards caused by biological factors at the workplace. In addition, this review briefly describes these factors and provides some examples of their adverse health effects. It also reviews risk assessments, protection with personal protective equipment, prevention with training of workers, regulations, as well as vaccinations.

Preliminary Hazard Analysis applied to Uranium Hexafluoride - UF6 production plant

International Nuclear Information System (INIS)

Tomzhinsky, David; Bichmacher, Ricardo; Braganca Junior, Alvaro; Peixoto, Orpet Jose

1996-01-01

The purpose of this paper is to present the results of the Preliminary hazard Analysis applied to the UF 6 Production Process, which is part of the UF 6 Conversion Plant. The Conversion Plant has designed to produce a high purified UF 6 in accordance with the nuclear grade standards. This Preliminary Hazard Analysis is the first step in the Risk Management Studies, which are under current development. The analysis evaluated the impact originated from the production process in the plant operators, members of public, equipment, systems and installations as well as the environment. (author)

Asymmetric Information in Iranian’s Health Insurance Market: Testing of Adverse Selection and Moral Hazard

Science.gov (United States)

Lotfi, Farhad; Gorji, Hassan Abolghasem; Mahdavi, Ghadir; Hadian, Mohammad

2015-01-01

Background: Asymmetric information is one of the most important issues in insurance market which occurred due to inherent characteristics of one of the agents involved in insurance contracts; hence its management requires designing appropriate policies. This phenomenon can lead to the failure of insurance market via its two consequences, namely, adverse selection and moral hazard. Objective: This study was aimed to evaluate the status of asymmetric information in Iran’s health insurance market with respect to the demand for outpatient services. Materials/sPatients and Methods: This research is a cross sectional study conducted on households living in Iran. The data of the research was extracted from the information on household’s budget survey collected by the Statistical Center of Iran in 2012. In this study, the Generalized Method of Moment model was used and the status of adverse selection and moral hazard was evaluated through calculating the latent health status of individuals in each insurance category. To analyze the data, Excel, Eviews and stata11 software were used. Results: The estimation of parameters of the utility function of the demand for outpatient services (visit, medicine, and Para-clinical services) showed that households were more risk averse in the use of outpatient care than other goods and services. After estimating the health status of households based on their health insurance categories, the results showed that rural-insured people had the best health status and people with supplementary insurance had the worst health status. In addition, the comparison of the conditional distribution of latent health status approved the phenomenon of adverse selection in all insurance groups, with the exception of rural insurance. Moreover, calculation of the elasticity of medical expenses to reimbursement rate confirmed the existence of moral hazard phenomenon. Conclusions: Due to the existence of the phenomena of adverse selection and moral hazard

Parent's knowledge and perceptions of the health effects of environmental hazards in sakarya, turkey

International Nuclear Information System (INIS)

Nursan, C.; Sevin, A.; Cemile, D.; Pinar, T.; Sevin, A

2014-01-01

Objective: To assess the knowledge and perception of parents of high school students about the health effects of environmental hazards in Sakarya province of Turkey. Method: The cross-section study was conducted in May 2009 in which randomly assigned 362 parents answered a questionnaire inquiring about the sociodemographics and a list of environmental hazards such as tobacco smoking, sunlight exposure and skin cancer, global climate change, air pollution, noise exposure, smoking during pregnancy and low birth-weight, exposure to radon and lung cancer, reducing radon, air pollution and cardiovascular diseases, base station and childhood leukaemia, extremely low frequency electric and magnetic fields and brain tumour. The participants were also asked about water pollution, environmental tobacco smoke, air pollution, ozone depletion, exposure to radon gas, soil pollution, noise pollution, formaldehyde related with furniture, ground ozone and pesticides etc. SPSS 15 was used for statistical analysis. Results: Among the participants 226 (62.4%) were females, and 284 (78.5%) were in the 31-45 age group. There were 246 (68%) high school or university graduates. Of the participants, 357 (98.6%) knew that smoking was a health risk, but exposure to radon gas was not that prevalent (n=194; 53.6%). The most intimidating risk was claimed as unsafe water (n=311; 85.9%), while noise exposure was the least source of worry among the environmental risks (n=134; 37.0%). Conclusion: There is a necessity to inform the public about less-known but significant environmental risks such as radon gas and noise exposure which may cause health problems. (author)

Parent's knowledge and perceptions of the health effects of environmental hazards in Sakarya, Turkey.

Science.gov (United States)

Nursan, Cinar; Müge, Alvur Tuncay; Cemile, Dede; Pinar, Topsever; Sevin, Altinkaynak

2014-01-01

To assess the knowledge and perception of parents of high school students about the health effects of environmental hazards in Sakarya province of Turkey. The cross-section study was conducted in May 2009 in which randomly assigned 362 parents answered a questionnaire inquiring about the sociodemographics and a list of environmental hazards such as tobacco smoking, sunlight exposure and skin cancer, global climate change, air pollution, noise exposure, smoking during pregnancy and low birth-weight, exposure to radon and lung cancer, reducing radon, air pollution and cardiovascular diseases, base station and childhood leukaemia, extremely low frequency electric and magnetic fields and brain tumour.The participants were also asked about water pollution, environmental tobacco smoke, air pollution, ozone depletion, exposure to radon gas, soil pollution, noise pollution, formaldehyde related with furniture, ground ozone and pesticides etc. SPSS 15 was used for statistical analysis. Among the participants 226 (62.4%) were females, and 284 (78.5%) were in the 31-45 age group. There were 246 (68%) high school or university graduates. Of the participants, 357 (98.6%) knew that smoking was a health risk, but exposure to radon gas was not that prevalent (n=194; 53.6%). The most intimidating risk was claimed as unsafe water (n=311; 85.9%), while noise exposure was the least source of worry among the environmental risks (n=134; 37.0%). There is a necessity to inform the public about less-known but significant environmental risks such as radon gas and noise exposure which may cause health problems.

Risk analysis for roadways subjected to multiple landslide-related hazards

Science.gov (United States)

Corominas, Jordi; Mavrouli, Olga

2014-05-01

Roadways through mountainous terrain often involve cuts and landslide areas whose stability is precarious and require protection and stabilization works. To optimize the allocation of resources, government and technical offices are increasingly interested in both the risk analysis and assessment. Risk analysis has to consider the hazard occurrence and the consequences. The consequences can be both direct and indirect. The former include the costs regarding the repair of the roadway, the damage of vehicles and the potential fatalities, while the latter refer to the costs related to the diversion of vehicles, the excess of distance travelled, the time differences, and tolls. The type of slope instabilities that may affect a roadway may vary and its effects as well. Most current approaches either consider a single hazardous phenomenon each time, or if applied at small (for example national) scale, they do not take into account local conditions at each section of the roadway. The objective of this work is the development of a simple and comprehensive methodology for the assessment of the risk due to multiple hazards along roadways, integrating different landslide types that include rockfalls, debris flows and considering as well the potential failure of retaining walls. To quantify risk, all hazards are expressed with a common term: their probability of occurrence. The methodology takes into consideration the specific local conditions along the roadway. For rockfalls and debris flow a variety of methods for assessing the probability of occurrence exists. To assess the annual probability of failure of retaining walls we use an indicator-based model that provides a hazard index. The model parameters consist in the design safety factor, and further anchorage design and construction parameters. The probability of failure is evaluated in function of the hazard index and next corrected (in terms of order of magnitude) according to in situ observations for increase of two

Spatial Analysis of the Level of Exposure to Seismic Hazards of Health Facilities in Mexico City, Mexico

Science.gov (United States)

Moran, S.; Novelo-Casanova, D. A.

2011-12-01

Although health facilities are essential infrastructure during disasters and emergencies, they are also usually highly vulnerable installations in the case of the occurrence of large and major earthquakes. Hospitals are one of the most complex critical facilities in modern cities and they are used as first response in emergency situations. The operability of a hospital must be maintained after the occurrence of a local strong earthquake in order to satisfy the need for medical care of the affected population. If a health facility is seriously damaged, it cannot fulfill its function when most is needed. In this case, hospitals become a casualty of the disaster. To identify the level of physical exposure of hospitals to seismic hazards in Mexico City, we analyzed their geographic location with respect to the seismic response of the different type of soils of the city from past earthquakes, mainly from the events that occurred on September 1985 (Ms= 8.0) and April 1989 (Ms= 6.9). Seismic wave amplification in this city is the result of the interaction of the incoming seismic waves with the soft and water saturated clay soils, on which a large part of Mexico City is built. The clay soils are remnants of the lake that existed in the Valley of Mexico and which has been drained gradually to accommodate the growing urban sprawl. Hospital facilities were converted from a simple database of names and locations into a map layer of resources. This resource layer was combined with other map layers showing areas of seismic microzonation in Mexico City. This overlay was then used to identify those hospitals that may be threatened by the occurrence of a large or major seismic event. We analyzed the public and private hospitals considered as main health facilities. Our results indicate that more than 50% of the hospitals are highly exposed to seismic hazards. Besides, in most of these health facilities we identified the lack of preventive measures and preparedness to reduce their

Health hazards associated with nanomaterials.

Science.gov (United States)

Pattan, Gurulingappa; Kaul, Gautam

2014-07-01

Nanotechnology is a major scientific and economic growth area and presents a variety of hazards for human health and environment. It is widely believed that engineered nanomaterials will be increasingly used in biomedical applications (as therapeutics and as diagnostic tools). However, before these novel materials can be safely applied in a clinical setting, their toxicity needs to be carefully assessed. Nanoscale materials often behave different from the materials with a larger structure, even when the basic material is same. Many mammals get exposed to these nanomaterials, which can reach almost every cell of the mammalian body, causing the cells to respond against nanoparticles (NPs) resulting in cytotoxicity and/or genotoxicity. The important key to understand the toxicity of nanomaterials is that their minute size, smaller than cellular organelles, allows them to penetrate the basic biological structures, disrupting their normal function. There is a wealth of evidence for the noxious and harmful effects of engineered NPs as well as other nanomaterials. The rapid commercialization of nanotechnology field requires thoughtful, attentive environmental, animal and human health safety research and should be an open discussion for broader societal impacts and urgent toxicological oversight action. While 'nanotoxicity' is a relatively new concept to science, this comprehensive review focuses on the nanomaterials exposure through the skin, respiratory tract, and gastrointestinal tract and their mechanism of toxicity and effect on various organs of the body. © The Author(s) 2012.

Hazard analysis and critical control point (HACCP) history and conceptual overview.

Science.gov (United States)

Hulebak, Karen L; Schlosser, Wayne

2002-06-01

The concept of Hazard Analysis and Critical Control Point (HACCP) is a system that enables the production of safe meat and poultry products through the thorough analysis of production processes, identification of all hazards that are likely to occur in the production establishment, the identification of critical points in the process at which these hazards may be introduced into product and therefore should be controlled, the establishment of critical limits for control at those points, the verification of these prescribed steps, and the methods by which the processing establishment and the regulatory authority can monitor how well process control through the HACCP plan is working. The history of the development of HACCP is reviewed, and examples of practical applications of HACCP are described.

Analysis and Assessment of Parameters Shaping Methane Hazard in Longwall Areas

Directory of Open Access Journals (Sweden)

Eugeniusz Krause

2013-01-01

Full Text Available Increasing coal production concentration and mining in coal seams of high methane content contribute to its growing emission to longwall areas. In this paper, analysis of survey data concerning the assessment of parameters that influence the level of methane hazard in mining areas is presented. The survey was conducted with experts on ventilation and methane hazard in coal mines. The parameters which influence methane hazard in longwall areas were assigned specific weights (numerical values. The summary will show which of the assessed parameters have a strong, or weak, influence on methane hazard in longwall areas close to coal seams of high methane content.

Occupational health hazards in veterinary medicine: Zoonoses and other biological hazards

Science.gov (United States)

Epp, Tasha; Waldner, Cheryl

2012-01-01

This study describes biological hazards reported by veterinarians working in western Canada obtained through a self-administered mailed questionnaire. The potential occupational hazards included as biological hazards were zoonotic disease events, exposure to rabies, injuries due to bites and scratches, and allergies. Only 16.7% (136/812) of responding veterinarians reported the occurrence of a zoonosis or exposure to rabies in the past 5 years; the most commonly reported event was ringworm. Most bites and scratches (86%) described by 586 veterinarians involved encounters with cats; 81% of the resulting 163 infections were due to cat bites or scratches. Approximately 38% of participants reported developing an allergy during their career, with 41% of the affected individuals altering the way they practiced in response to their allergy. PMID:22851775

Radon and its hazards

International Nuclear Information System (INIS)

Chang Guilan

2002-01-01

The author describes basic physical and chemical properties of radon and the emanation, introduces methods of radon measurement, expounds the hazards of non-mine radon accumulation to the health of human being and the protection, as well as the history how the human being recognizes the hazards of radon through the specific data and examples, and finally proposes protecting measures to avoid the hazards of radon to the health of human being, and to do ecologic evaluation of environments

Long term volcanic hazard analysis in the Canary Islands

Science.gov (United States)

Becerril, L.; Galindo, I.; Laín, L.; Llorente, M.; Mancebo, M. J.

2009-04-01

Historic volcanism in Spain is restricted to the Canary Islands, a volcanic archipelago formed by seven volcanic islands. Several historic eruptions have been registered in the last five hundred years. However, and despite the huge amount of citizens and tourist in the archipelago, only a few volcanic hazard studies have been carried out. These studies are mainly focused in the developing of hazard maps in Lanzarote and Tenerife islands, especially for land use planning. The main handicap for these studies in the Canary Islands is the lack of well reported historical eruptions, but also the lack of data such as geochronological, geochemical or structural. In recent years, the use of Geographical Information Systems (GIS) and the improvement in the volcanic processes modelling has provided an important tool for volcanic hazard assessment. Although this sophisticated programs are really useful they need to be fed by a huge amount of data that sometimes, such in the case of the Canary Islands, are not available. For this reason, the Spanish Geological Survey (IGME) is developing a complete geo-referenced database for long term volcanic analysis in the Canary Islands. The Canarian Volcanic Hazard Database (HADA) is based on a GIS helping to organize and manage volcanic information efficiently. HADA includes the following groups of information: (1) 1:25.000 scale geologic maps, (2) 1:25.000 topographic maps, (3) geochronologic data, (4) geochemical data, (5) structural information, (6) climatic data. Data must pass a quality control before they are included in the database. New data are easily integrated in the database. With the HADA database the IGME has started a systematic organization of the existing data. In the near future, the IGME will generate new information to be included in HADA, such as volcanological maps of the islands, structural information, geochronological data and other information to assess long term volcanic hazard analysis. HADA will permit

Hazard identification checklist: Occupational safety and health issues associated with green building

NARCIS (Netherlands)

Terwoert, J.; Ustailieva, E.

2013-01-01

This checklist accompanies the e-fact on the same topic and aims to help identify the potential hazards to workers’ safety and health associated with the planning and construction of green buildings, their maintenance, renovation (retrofitting), demolition, and on-site waste collection. It also

Chemical hazards analysis of resilient flooring for healthcare.

Science.gov (United States)

Lent, Tom; Silas, Julie; Vallette, Jim

2010-01-01

This article addresses resilient flooring, evaluating the potential health effects of vinyl flooring and the leading alternatives-synthetic rubber, polyolefin, and linoleum-currently used in the healthcare marketplace. The study inventories chemicals incorporated as components of each of the four material types or involved in their life cycle as feedstocks, intermediary chemicals, or emissions. It then characterizes those chemicals using a chemical hazard-based framework that addresses persistence and bioaccumulation, human toxicity, and human exposures.

Social Hazards as Manifested Workplace Discrimination and Health (Vietnamese and Ukrainian Female and Male Migrants in Czechia)

OpenAIRE

Drbohlav, Dušan; Dzúrová, Dagmar

2017-01-01

Social hazards as one of the dimensions of workplace discrimination are a potential social determinant of health inequalities. The aim of this study was to investigate relations between self-reported health and social hazard characteristics (defined as—discrimination as such, violence or threat of violence, time pressure or work overload and risk of accident) among Vietnamese and Ukrainian migrants (males and females) in Czechia by age, education level and marital status. This study is based ...

Hazard classification and auditable safety analysis for the 1300-N Emergency Dump Basin

International Nuclear Information System (INIS)

Kretzschmar, S.P.; Larson, A.R.

1996-06-01

This document combines the following four analytical functions: (1) hazards baseline of the Emergency Dump Basin (EDB) in the quiescent state; (2) preliminary hazard classification for intrusive activities (i.e., basin stabilization); (3) final hazard classification for intrusive activities; and (4) an auditable safety analysis. This document describes the potential hazards contained within the EDB at the N Reactor complex and the vulnerabilities of those hazards during the quiescent state (when only surveillance and maintenance activities take place) and during basin stabilization activities. This document also identifies the inventory of both radioactive and hazardous material in the EDB. Result is that the final hazard classification for the EDB segment intrusive activities is radiological

Assessment of human health hazard due to metal uptake via fish ...

African Journals Online (AJOL)

Assessment of human health hazard due to metal uptake via fish consumption from coastal area of Tanzania. ... The result shows that the concentration and THQ of As in all fish samples ranges from 1.173 – 2.325 which is > 1, hence signified that a daily exposure at this level are in risk of cancer during a person lifetime.

Hazard analysis and critical control point (HACCP) for an ultrasound food processing operation.

Science.gov (United States)

Chemat, Farid; Hoarau, Nicolas

2004-05-01

Emerging technologies, such as ultrasound (US), used for food and drink production often cause hazards for product safety. Classical quality control methods are inadequate to control these hazards. Hazard analysis of critical control points (HACCP) is the most secure and cost-effective method for controlling possible product contamination or cross-contamination, due to physical or chemical hazard during production. The following case study on the application of HACCP to an US food-processing operation demonstrates how the hazards at the critical control points of the process are effectively controlled through the implementation of HACCP.

Current issues and related activities in seismic hazard analysis in Korea

Energy Technology Data Exchange (ETDEWEB)

Seo, Jeong-Moon [Korea Atomic Energy Research Inst., Taejon (Korea, Republic of); Lee, Jong-Rim; Chang, Chun-Joong

1997-03-01

This paper discusses some technical issues identified from the seismic hazard analyses for probabilistic safety assessment on the operating Korean nuclear power plants and the related activities to resolve the issues. Since there are no strong instrumental earthquake records in Korea, the seismic hazard analysis is mainly dependent on the historical earthquake records. Results of the past seismic hazard analyses show that there are many uncertainties in attenuation function and intensity level and that there is a need to improve statistical method. The identification of the activity of the Yangsan Fault, which is close to nuclear power plant sites, has been an important issue. But the issue has not been resolved yet in spite of much research works done. Recently, some capable faults were found in the offshore area of Gulupdo Island in the Yellow Sea. It is anticipated that the results of research on both the Yangsan Fault and reduction of uncertainty in seismic hazard analysis will have an significant influence on seismic design and safety assessment of nuclear power plants in the future. (author)

Current issues and related activities in seismic hazard analysis in Korea

International Nuclear Information System (INIS)

Seo, Jeong-Moon; Lee, Jong-Rim; Chang, Chun-Joong.

1997-01-01

This paper discusses some technical issues identified from the seismic hazard analyses for probabilistic safety assessment on the operating Korean nuclear power plants and the related activities to resolve the issues. Since there are no strong instrumental earthquake records in Korea, the seismic hazard analysis is mainly dependent on the historical earthquake records. Results of the past seismic hazard analyses show that there are many uncertainties in attenuation function and intensity level and that there is a need to improve statistical method. The identification of the activity of the Yangsan Fault, which is close to nuclear power plant sites, has been an important issue. But the issue has not been resolved yet in spite of much research works done. Recently, some capable faults were found in the offshore area of Gulupdo Island in the Yellow Sea. It is anticipated that the results of research on both the Yangsan Fault and reduction of uncertainty in seismic hazard analysis will have an significant influence on seismic design and safety assessment of nuclear power plants in the future. (author)

Hazard Classification and Auditable Safety Analysis for the 1300-N Emergency Dump Basin

International Nuclear Information System (INIS)

Kloster, G.L.

1998-01-01

This document combines three analytical functions consisting of (1) the hazards baseline of the Emergency Dump Basin (EDB) for surveillance and maintenance, (2) the final hazard classification for the facility, and (3) and auditable safety analysis. This document also describes the potential hazards contained within the EDB at the N Reactor complex and the vulnerabilities of those hazards. The EDB segment is defined and confirmed its independence from other segments at the site by demonstrating that no potential adverse interactions exist between the segments. No EDB hazards vulnerabilities were identified that require reliance on either active, mitigative, or protective measures; adequate facility structural integrity exists to safely control the hazards

Multi-hazard risk analysis using the FP7 RASOR Platform

Science.gov (United States)

Koudogbo, Fifamè N.; Duro, Javier; Rossi, Lauro; Rudari, Roberto; Eddy, Andrew

2014-10-01

Climate change challenges our understanding of risk by modifying hazards and their interactions. Sudden increases in population and rapid urbanization are changing exposure to risk around the globe, making impacts harder to predict. Despite the availability of operational mapping products, there is no single tool to integrate diverse data and products across hazards, update exposure data quickly and make scenario-based predictions to support both short and long-term risk-related decisions. RASOR (Rapid Analysis and Spatialization Of Risk) will develop a platform to perform multi-hazard risk analysis for the full cycle of disaster management, including targeted support to critical infrastructure monitoring and climate change impact assessment. A scenario-driven query system simulates future scenarios based on existing or assumed conditions and compares them with historical scenarios. RASOR will thus offer a single work environment that generates new risk information across hazards, across data types (satellite EO, in-situ), across user communities (global, local, climate, civil protection, insurance, etc.) and across the world. Five case study areas are considered within the project, located in Haiti, Indonesia, Netherlands, Italy and Greece. Initially available over those demonstration areas, RASOR will ultimately offer global services to support in-depth risk assessment and full-cycle risk management.

Environmental Public Health Tracking: a cost-effective system for characterizing the sources, distribution and public health impacts of environmental hazards.

Science.gov (United States)

Saunders, P J; Middleton, J D; Rudge, G

2017-09-01

The contemporary environment is a complex of interactions between physical, biological, socio-economic systems with major impacts on public health. However, gaps in our understanding of the causes, extent and distribution of these effects remain. The public health community in Sandwell West Midlands has collaborated to successfully develop, pilot and establish the first Environmental Public Health Tracking (EPHT) programme in Europe to address this 'environmental health gap' through systematically linking data on environmental hazards, exposures and diseases. Existing networks of environmental, health and regulatory agencies developed a suite of innovative methods to routinely share, integrate and analyse data on hazards, exposures and health outcomes to inform interventions. Effective data sharing and horizon scanning systems have been established, novel statistical methods piloted, plausible associations framed and tested, and targeted interventions informed by local concerns applied. These have influenced changes in public health practice. EPHT is a powerful tool for identifying and addressing the key environmental public health impacts at a local level. Sandwell's experience demonstrates that it can be established and operated at virtually no cost. The transfer of National Health Service epidemiological skills to local authorities in 2013 provides an opportunity to expand the programme to fully exploit its potential. © The Author 2016. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Hazardous materials

Science.gov (United States)

... substances that could harm human health or the environment. Hazardous means dangerous, so these materials must be ... M. is also a founding member of Hi-Ethics and subscribes to the principles of the Health ...

Biomarkers of exposure, effect, and susceptibility of arsenic-induced health hazards in Taiwan

International Nuclear Information System (INIS)

Chen, C.-J.; Hsu, L.-I; Wang, C.-H.

2005-01-01

Long-term exposure to inorganic arsenic from drinking water has been documented to induce cancers and vascular diseases in a dose-response relationship. A series of molecular environmental epidemiological studies have been carried out to elucidate biomarkers of exposure, effect, and susceptibility for arsenic-related health hazards in Taiwan. Arsenic levels in urine, hair, and nail are biomarkers for short-term (<1 year) internal dose, skin hyperpigmentation and palmoplantar hyperkeratosis are for long-term (many years) internal dose, and percentage of monomethylarsonic acid in total metabolites of inorganic arsenic in urine may be considered as an exposure marker for biologically effective dose. The biomarkers of early biological effects of ingested inorganic arsenic included blood levels of reactive oxidants and anti-oxidant capacity, genetic expression of inflammatory molecules, as well as cytogenetic changes including sister chromatid exchange, micronuclei, and chromosome aberrations of peripheral lymphocytes. Both mutation type and hot spots of p53 gene were significantly different in arsenic-induced and non-arsenic-induced TCCs. The frequency of chromosomal imbalances analyzed by comparative genomic hybridization and the frequency of loss of heterozygosity were significantly higher in arsenic-induced TCC than non-arsenic-induced TCC at specific sites. Biomarkers of susceptibility to arsenic-induced health hazards included genetic polymorphisms of enzymes involved in xenobiotic metabolism, DNA repair, and oxidative stress, as well as serum level of carotenoids. Gene-gene and gene-environment interactions are involved in arsenic-induced health hazards through toxicological mechanisms including genomic instability and oxidative stress

Multi-hazard risk analysis related to hurricanes

Science.gov (United States)

Lin, Ning

Hurricanes present major hazards to the United States. Associated with extreme winds, heavy rainfall, and storm surge, landfalling hurricanes often cause enormous structural damage to coastal regions. Hurricane damage risk assessment provides the basis for loss mitigation and related policy-making. Current hurricane risk models, however, often oversimplify the complex processes of hurricane damage. This dissertation aims to improve existing hurricane risk assessment methodology by coherently modeling the spatial-temporal processes of storm landfall, hazards, and damage. Numerical modeling technologies are used to investigate the multiplicity of hazards associated with landfalling hurricanes. The application and effectiveness of current weather forecasting technologies to predict hurricane hazards is investigated. In particular, the Weather Research and Forecasting model (WRF), with Geophysical Fluid Dynamics Laboratory (GFDL)'s hurricane initialization scheme, is applied to the simulation of the wind and rainfall environment during hurricane landfall. The WRF model is further coupled with the Advanced Circulation (AD-CIRC) model to simulate storm surge in coastal regions. A case study examines the multiple hazards associated with Hurricane Isabel (2003). Also, a risk assessment methodology is developed to estimate the probability distribution of hurricane storm surge heights along the coast, particularly for data-scarce regions, such as New York City. This methodology makes use of relatively simple models, specifically a statistical/deterministic hurricane model and the Sea, Lake and Overland Surges from Hurricanes (SLOSH) model, to simulate large numbers of synthetic surge events, and conducts statistical analysis. The estimation of hurricane landfall probability and hazards are combined with structural vulnerability models to estimate hurricane damage risk. Wind-induced damage mechanisms are extensively studied. An innovative windborne debris risk model is

Informing Workers of Chemical Hazards: The OSHA Hazard Communication Standard.

Science.gov (United States)

American Chemical Society, Washington, DC.

Practical information on how to implement a chemical-related safety program is outlined in this publication. Highlights of the federal Occupational Safety and Health Administrations (OSHA) Hazard Communication Standard are presented and explained. These include: (1) hazard communication requirements (consisting of warning labels, material safety…

Lithium-thionyl chloride cell system safety hazard analysis

Science.gov (United States)

Dampier, F. W.

1985-03-01

This system safety analysis for the lithium thionyl chloride cell is a critical review of the technical literature pertaining to cell safety and draws conclusions and makes recommendations based on this data. The thermodynamics and kinetics of the electrochemical reactions occurring during discharge are discussed with particular attention given to unstable SOCl2 reduction intermediates. Potentially hazardous reactions between the various cell components and discharge products or impurities that could occur during electrical or thermal abuse are described and the most hazardous conditions and reactions identified. Design factors influencing the safety of Li/SOCl2 cells, shipping and disposal methods and the toxicity of Li/SOCl2 battery components are additional safety issues that are also addressed.

Survey dataset on occupational hazards on construction sites

Directory of Open Access Journals (Sweden)

Patience F. Tunji-Olayeni

2018-06-01

Full Text Available The construction site provides an unfriendly working conditions, exposing workers to one of the harshest environments at a workplace. In this dataset, a structured questionnaire was design directed to thirty-five (35 craftsmen selected through a purposive sampling technique on various construction sites in one of the most populous cities in sub-Saharan Africa. The set of descriptive statistics is presented with tables, stacked bar chats and pie charts. Common occupational health conditions affecting the cardiovascular, respiratory and musculoskeletal systems of craftsmen on construction sites were identified. The effects of occupational health hazards on craftsmen and on construction project performance can be determined when the data is analyzed. Moreover, contractors’ commitment to occupational health and safety (OHS can be obtained from the analysis of the survey data. Keywords: Accidents, Construction industry, Craftsmen, Health, Occupational hazards

[Chemical hazards arising from shale gas extraction].

Science.gov (United States)

Pakulska, Daria

2015-01-01

The development of the shale industry is gaining momentum and hence the analysis of chemical hazards to the environment and health of the local population is extreiely timely and important. Chemical hazards are created during the exploitation of all minerals, but in the case of shale gas production, there is much more uncertainty as regards to the effects of new technologies application. American experience suggests the increasing risk of environmental contamination, mainly groundwater. The greatest, concern is the incomplete knowledge of the composition of fluids used for fracturing shale rock and unpredictability of long-term effects of hydraulic fracturing for the environment and health of residents. High population density in the old continent causes the problem of chemical hazards which is much larger than in the USA. Despite the growing public discontent data on this subject are limited. First of all, there is no epidemiological studies to assess the relationship between risk factors, such as air and water pollution, and health effects in populations living in close proximity to gas wells. The aim of this article is to identify and discuss existing concepts on the sources of environmental contamination, an indication of the environment elements under pressure and potential health risks arising from shale gas extraction.

Seismic hazard analysis of the NPP Kozloduy site

International Nuclear Information System (INIS)

Petrovski, D.; Stamatovska, S.; Arsovski, M.; Hadzievski, D.; Sokerova, D.; Solakov, D.; Vaptzarov, I.; Satchanski, S.

1993-01-01

The principal objective of this study is to define the seismic hazard for the NPP Kozloduy site. Seismic hazard is by rule defined by the probability distribution function of the peak value of the chosen ground motion parameter in a defined time interval. The overall study methodology consists of reviewing the existing geological, seismological and tectonic information to formulate this information into a mathematical model of seismic activity of the region and using this assess earthquake ground motion in terms of probability. Detailed regional and local seismological investigations have been performed. Regional investigations encompass the area within a radius of 320 km from the NPP Kozloduy site. The results of these investigations include all seismological parameters that are necessary for determination of the mathematical model of the seismicity of the region needed for the seismic hazard analysis. Regional geological and neotectonic investigations were also performed for the wider area including almost the whole territory of Bulgaria, a large part of Serbia, part of Macedonia and almost the whole south part of Romania

Technical Guidance for Hazardous Analysis, Emergency Planning for Extremely Hazardous Substances

Science.gov (United States)

This current guide supplements NRT-1 by providing technical assistance to LEPCs to assess the lethal hazards related to potential airborne releases of extremely hazardous substances (EHSs) as designated under Section 302 of Title Ill of SARA.

Radon hazard map in Bas-Rhin, final report

International Nuclear Information System (INIS)

2010-01-01

After a presentation of radon (geochemical properties, origin, emanation and transfer to surface, related health hazard, exposure factor, modalities for the struggle against radon), of the study context, framework and objective, and of the Bas-Rhin geological context, this report presents the exploited data: definition of the geological uranium potential, direct measurements and geochemical analysis, indicators (lithologic characterization, surface radioactivity, drifting alluvial deposits), factors promoting inhalation, measurements in buildings. It presents and comments maps of the radon geological potential and of radon hazard. It proposes an assessment of radon potential hazard for different areas of the district, and reports measurements performed in Strasbourg, Eckbolsheim, Bischeim and Haguenau

Fire hazard analysis of the radioactive mixed waste trenchs

International Nuclear Information System (INIS)

McDonald, K.M.

1995-01-01

This Fire Hazards Analysis (FHA) is intended to assess comprehensively the risk from fire associated with the disposal of low level radioactive mixed waste in trenches within the lined landfills, provided by Project W-025, designated Trench 31 and 34 of the Burial Ground 218-W-5. Elements within the FHA make recommendations for minimizing risk to workers, the public, and the environment from fire during the course of the operation's activity. Transient flammables and combustibles present that support the operation's activity are considered and included in the analysis. The graded FHA contains the following elements: description of construction, protection of essential safety class equipment, fire protection features, description of fire hazards, life safety considerations, critical process equipment, high value property, damage potential--maximum credible fire loss (MCFL) and maximum possible fire loss (MPFL), fire department/brigade response, recovery potential, potential for a toxic, biological and/or radiation incident due to a fire, emergency planning, security considerations related to fire protection, natural hazards (earthquake, flood, wind) impact on fire safety, and exposure fire potential, including the potential for fire spread between fire areas. Recommendations for limiting risk are made in the text of this report and printed in bold type. All recommendations are repeated in a list in Section 18.0

Fire Hazard Analysis for the Cold Neutron Source System

Energy Technology Data Exchange (ETDEWEB)

Choi, Jung Won; Kim, Young Ki; Wu, Sang Ik; Park, Young Cheol; Kim, Bong Soo; Kang, Mee Jin; Oh, Sung Wook

2006-04-15

As the Cold Neutron Source System for its installation in HANARO has been designing, the fire hazard analysis upon the CNS system becomes required under No. 2003-20 of the MOST notice, Technical Standard about the Fire Hazard Analysis. As a moderator, the strongly flammable hydrogen is filled in the hydrogen system of CNS. Against the fire or explosion in the reactor hall, accordingly, the physical damage on the reactor safety system should be evaluated in order to reflect the safety protection precaution in the design of CNS system. For the purpose of fire hazard analysis, the accident scenarios were divided into three: hydrogen leak during the hydrogen charging in the system, hydrogen leak during the normal operation of CNS, explosion of hydrogen buffer tank by the external fire. The analysis results can be summarized as follows. First, there is no physical damage threatening the reactor safety system although all hydrogen gas came out of the system then ignited as a jet fire. Second, since the CNS equipment island (CEI) is located enough away from the reactor, no physical damage caused by the buffer tank explosion is on the reactor in terms of the overpressure except the flying debris so that the light two-hour fireproof panel is installed in an one side of hydrogen buffer tank. Third, there are a few combustibles on the second floor of CEI so that the fire cannot be propagated to other areas in the reactor hall; however, the light two-hour fireproof panel will be built on the second floor against the external or internal fire so as to play the role of a fire protection area.

Fire Hazard Analysis for the Cold Neutron Source System

International Nuclear Information System (INIS)

Choi, Jung Won; Kim, Young Ki; Wu, Sang Ik; Park, Young Cheol; Kim, Bong Soo; Kang, Mee Jin; Oh, Sung Wook

2006-04-01

As the Cold Neutron Source System for its installation in HANARO has been designing, the fire hazard analysis upon the CNS system becomes required under No. 2003-20 of the MOST notice, Technical Standard about the Fire Hazard Analysis. As a moderator, the strongly flammable hydrogen is filled in the hydrogen system of CNS. Against the fire or explosion in the reactor hall, accordingly, the physical damage on the reactor safety system should be evaluated in order to reflect the safety protection precaution in the design of CNS system. For the purpose of fire hazard analysis, the accident scenarios were divided into three: hydrogen leak during the hydrogen charging in the system, hydrogen leak during the normal operation of CNS, explosion of hydrogen buffer tank by the external fire. The analysis results can be summarized as follows. First, there is no physical damage threatening the reactor safety system although all hydrogen gas came out of the system then ignited as a jet fire. Second, since the CNS equipment island (CEI) is located enough away from the reactor, no physical damage caused by the buffer tank explosion is on the reactor in terms of the overpressure except the flying debris so that the light two-hour fireproof panel is installed in an one side of hydrogen buffer tank. Third, there are a few combustibles on the second floor of CEI so that the fire cannot be propagated to other areas in the reactor hall; however, the light two-hour fireproof panel will be built on the second floor against the external or internal fire so as to play the role of a fire protection area

Fire Hazard Analysis for the Cold Vacuum Drying facility (CVD) Facility

Energy Technology Data Exchange (ETDEWEB)

SINGH, G.

2000-09-06

The CVDF is a nonreactor nuclear facility that will process the Spent Nuclear Fuels (SNF) presently stored in the 105-KE and 105-KW SNF storage basins. Multi-canister overpacks (MCOs) will be loaded (filled) with K Basin fuel transported to the CVDF. The MCOs will be processed at the CVDF to remove free water from the fuel cells (packages). Following processing at the CVDF, the MCOs will be transported to the CSB for interim storage until a long-term storage solution can be implemented. This operation is expected to start in November 2000. A Fire Hazard Analysis (FHA) is required for all new facilities and all nonreactor nuclear facilities, in accordance with U.S. Department of Energy (DOE) Order 5480.7A, Fire Protection. This FHA has been prepared in accordance with DOE 5480.7A and HNF-PRO-350, Fire Hazard Analysis Requirements. Additionally, requirements or criteria contained in DOE, Richland Operations Office (RL) RL Implementing Directive (RLID) 5480.7, Fire Protection, or other DOE documentation are cited, as applicable. This FHA comprehensively assesses the risk of fire at the CVDF to ascertain whether the specific objectives of DOE 5480.7A are met. These specific fire protection objectives are: (1) Minimize the potential for the occurrence of a fire. (2) Ensure that fire does not cause an onsite or offsite release of radiological and other hazardous material that will threaten the public health and safety or the environment. (3) Establish requirements that will provide an acceptable degree of life safety to DOE and contractor personnel and ensure that there are no undue hazards to the public from fire and its effects in DOE facilities. (4) Ensure that vital DOE programs will not suffer unacceptable delays as a result of fire and related perils. (5) Ensure that property damage from fire and related perils does not exceed an acceptable level. (6) Ensure that process control and safety systems are not damaged by fire or related perils. This FHA is based on the

Fire Hazard Analysis for the Cold Vacuum Drying facility (CVD) Facility

International Nuclear Information System (INIS)

SINGH, G.

2000-01-01

The CVDF is a nonreactor nuclear facility that will process the Spent Nuclear Fuels (SNF) presently stored in the 105-KE and 105-KW SNF storage basins. Multi-canister overpacks (MCOs) will be loaded (filled) with K Basin fuel transported to the CVDF. The MCOs will be processed at the CVDF to remove free water from the fuel cells (packages). Following processing at the CVDF, the MCOs will be transported to the CSB for interim storage until a long-term storage solution can be implemented. This operation is expected to start in November 2000. A Fire Hazard Analysis (FHA) is required for all new facilities and all nonreactor nuclear facilities, in accordance with U.S. Department of Energy (DOE) Order 5480.7A, Fire Protection. This FHA has been prepared in accordance with DOE 5480.7A and HNF-PRO-350, Fire Hazard Analysis Requirements. Additionally, requirements or criteria contained in DOE, Richland Operations Office (RL) RL Implementing Directive (RLID) 5480.7, Fire Protection, or other DOE documentation are cited, as applicable. This FHA comprehensively assesses the risk of fire at the CVDF to ascertain whether the specific objectives of DOE 5480.7A are met. These specific fire protection objectives are: (1) Minimize the potential for the occurrence of a fire. (2) Ensure that fire does not cause an onsite or offsite release of radiological and other hazardous material that will threaten the public health and safety or the environment. (3) Establish requirements that will provide an acceptable degree of life safety to DOE and contractor personnel and ensure that there are no undue hazards to the public from fire and its effects in DOE facilities. (4) Ensure that vital DOE programs will not suffer unacceptable delays as a result of fire and related perils. (5) Ensure that property damage from fire and related perils does not exceed an acceptable level. (6) Ensure that process control and safety systems are not damaged by fire or related perils. This FHA is based on the

A perverse 'net' effect? Health insurance and ex-ante moral hazard in Ghana

NARCIS (Netherlands)

Debebe, Z.Y.; Kempen, L.A.C.M. van; Hoop, T.J. de

2012-01-01

Incentive problems in insurance markets are well-established in economic theory. One of these incentive problems is related to reduced prevention efforts following insurance coverage (ex-ante moral hazard). This prediction is yet to be tested empirically with regard to health insurance, as the

Hazard and consequence analysis for waste emplacement at the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Gerstner, D.M.; Clayton, S.G.; Farrell, R.F.; McCormick, J.A.; Ortiz, C.; Standiford, D.L.

1996-01-01

The Carlsbad Area Office established and analyzed the safety bases for the design and operations as documented in the WIPP Safety Analysis Report (SAR). Additional independent efforts are currently underway to assess the hazards associated with the long-term (10,000 year) isolation period as required by 40 CFR 191. The structure of the WIPP SAR is unique due to the hazards involved, and the agreement between the State of New Mexico and the DOE regarding SAR content and format. However, the hazards and accident analysis philosophy as contained in DOE-STD-3009-94 was followed as closely as possible, while adhering to state agreements. Hazards associated with WIPP waste receipt, emplacement, and disposal operations were systematically identified using a modified Hazard and Operability Study (HAZOP) technique. The WIPP HAZOP assessed the potential internal, external, and natural phenomena events that can cause the identified hazards to develop into accidents. The hazard assessment identified deviations from the intended design and operation of the waste handling system, analyzed potential accident consequences to the public and workers, estimated likelihood of occurrence, and evaluated associated preventative and mitigative features. It was concluded from the assessment that the proposed WIPP waste emplacement operations and design are sufficient to ensure safety of the public, workers, and environment, over the 35 year disposal phase

Evaluation of an active learning module to teach hazard and risk in Hazard Analysis and Critical Control Points (HACCP) classes.

Science.gov (United States)

Oyarzabal, Omar A; Rowe, Ellen

2017-04-01

The terms hazard and risk are significant building blocks for the organization of risk-based food safety plans. Unfortunately, these terms are not clear for some personnel working in food manufacturing facilities. In addition, there are few examples of active learning modules for teaching adult participants the principles of hazard analysis and critical control points (HACCP). In this study, we evaluated the effectiveness of an active learning module to teach hazard and risk to participants of HACCP classes provided by the University of Vermont Extension in 2015 and 2016. This interactive module is comprised of a questionnaire; group playing of a dice game that we have previously introduced in the teaching of HACCP; the discussion of the terms hazard and risk; and a self-assessment questionnaire to evaluate the teaching of hazard and risk. From 71 adult participants that completed this module, 40 participants (56%) provided the most appropriate definition of hazard, 19 participants (27%) provided the most appropriate definition of risk, 14 participants (20%) provided the most appropriate definitions of both hazard and risk, and 23 participants (32%) did not provide an appropriate definition for hazard or risk. Self-assessment data showed an improvement in the understanding of these terms (P active learning modules to teach food safety classes. This study suggests that active learning helps food personnel better understand important food safety terms that serve as building blocks for the understanding of more complex food safety topics.

Fire hazard analysis for fusion energy experiments

International Nuclear Information System (INIS)

Alvares, N.J.; Hasegawa, H.K.

1979-01-01

The 2XIIB mirror fusion facility at Lawrence Livermore Laboratory (LLL) was used to evaluate the fire safety of state-of-the-art fusion energy experiments. The primary objective of this evaluation was to ensure the parallel development of fire safety and fusion energy technology. Through fault-tree analysis, we obtained a detailed engineering description of the 2XIIB fire protection system. This information helped us establish an optimum level of fire protection for experimental fusion energy facilities as well as evaluate the level of protection provided by various systems. Concurrently, we analyzed the fire hazard inherent to the facility using techniques that relate the probability of ignition to the flame spread and heat-release potential of construction materials, electrical and thermal insulations, and dielectric fluids. A comparison of the results of both analyses revealed that the existing fire protection system should be modified to accommodate the range of fire hazards inherent to the 2XIIB facility

Preliminary fire hazards analysis for W-211, Initial Tank Retrieval Systems

International Nuclear Information System (INIS)

Huckfeldt, R.A.

1995-01-01

A fire hazards analysis (FHA) was performed for Project W-211, Initial Tank Retrieval System (ITRS), at the Department of Energy (DOE) Hanford site. The objectives of this FHA was to determine (1) the fire hazards that expose the Initial Tank Retrieval System or are inherent in the process, (2) the adequacy of the fire-safety features planned, and (3) the degree of compliance of the project with specific fire safety provisions in DOE orders and related engineering codes and standards. The scope included the construction, the process hazards, building fire protection, and site wide fire protection. The results are presented in terms of the fire hazards present, the potential extent of fire damage, and the impact on employees and public safety. This study evaluated the ITRS with respect to its use at Tank 241-SY-101 only

Probabilistic seismic hazard analysis - lessons learned: A regulator's perspective

International Nuclear Information System (INIS)

Reiter, L.

1990-01-01

Probabilistic seismic hazard analysis is a powerful, rational and attractive tool for decision-making. It is capable of absorbing and integrating a wide range of information and judgement and their associated uncertainties into a flexible framework that permits the application of societal goals and priorities. Unfortunately, its highly integrative nature can obscure those elements which drive the results, its highly quantitative nature can lead to false impressions of accuracy, and its open embrace of uncertainty can make decision-making difficult. Addressing these problems can only help to increase its use and make it more palatable to those who need to assess seismic hazard and utilize the results. (orig.)

Market mechanisms for compensating hazardous work: a critical analysis

International Nuclear Information System (INIS)

Shakow, D.

1984-01-01

Adam Smith's theory that the marketplace can compensate workers for social inequities (i.e., hazards, boredom, etc.) in the work place is applied to the nuclear industry. The author argues that market mechanisms are unlikely to ensure adequate compensation for work-related hazards. He summarizes and critiques the neoclassical compensating-wage hypothesis, then reviews empirical evidence in support of the hypothesis in light of an alternative hypothesis derived from the literature on labor market segmentation. He challenges the assumption of perfect labor mobility and perfect information. A promising direction for further research would be a structural analysis of the emerging market for temporary workers. 13 references, 2 figures

Participatory Research Revealing the Work and Occupational Health Hazards of Cooperative Recyclers in Brazil

Directory of Open Access Journals (Sweden)

Sonia M. N. Felipone

2013-09-01

Full Text Available Although informal waste collectors are sometimes organized in cooperatives, their working conditions remain extremely precarious and unsafe. The paper discusses the findings of action oriented, participatory qualitative research with several recycling groups in the metropolitan region of São Paulo, Brazil. During workshops with the recyclers mapping, acting, and drawing methods helped reveal health hazards from collection, separation and transportation of recyclable materials. Major health problems relate to chemical and biological hazards, musculoskeletal damage, mechanical trauma and poor emotional wellbeing. The recent federal legislation on solid waste management opens new avenues for the inclusion of recycling cooperatives in selective waste collection. Nevertheless, we express the need to consider the distinctive characteristics and vulnerabilities of recycling groups, when developing safer work environments in these social businesses. We also suggest that the workspace be ergonomically organized and that public awareness campaigns about selective waste collection are conducted regularly to increase the quality of source separation. The introduction of electric hand pushed carts can further reduce health strains. This research has produced a better understanding of the work of the recyclers and related health risks. The interactive qualitative research methodology has allowed for the co-creation and mobilization of specific knowledge on health and safety in recycling cooperatives.

Systems engineered health and safety criteria for safety analysis reports

International Nuclear Information System (INIS)

Beitel, G.A.; Morcos, N.

1993-01-01

The world of safety analysis is filled with ambiguous words: codes and standards, consequences and risks, hazard and accident, and health and safety. These words have been subject to disparate interpretations by safety analysis report (SAR) writers, readers, and users. open-quotes Principal health and safety criteriaclose quotes has been one of the most frequently misused phrases; rarely is it used consistently or effectively. This paper offers an easily understood definition for open-quotes principal health and safety criteriaclose quotes and uses systems engineering to convert an otherwise mysterious topic into the primary means of producing an integrated SAR. This paper is based on SARs being written for environmental restoration and waste management activities for the U.S. Department of Energy (DOE). Requirements for these SARs are prescribed in DOE Order 5480-23, open-quotes Nuclear Safety Analysis Reports.close quotes

Preliminary risk analysis applied to the handling of health-care waste

Directory of Open Access Journals (Sweden)

Carvalho S.M.L.

2002-01-01

Full Text Available Between 75% and 90% of the waste produced by health-care providers no risk or is "general" health-care waste, comparable to domestic waste. The remaining 10-25% of health-care waste is regarded as hazardous due to one or more of the following characteristics: it may contain infectious agents, sharps, toxic or hazardous chemicals or it may be radioactive. Infectious health-care waste, particularly sharps, has been responsible for most of the accidents reported in the literature. In this work the preliminary risks analysis (PRA technique was used to evaluate practices in the handling of infectious health-care waste. Currently the PRA technique is being used to identify and to evaluate the potential for hazard of the activities, products, and services from facilities and industries. The system studied was a health-care establishment which has handling practices for infectious waste. Thirty-six procedures related to segregation, containment, internal collection, and storage operation were analyzed. The severity of the consequences of the failure (risk that can occur from careless management of infectious health-care waste was classified into four categories: negligible, marginal, critical, and catastrophic. The results obtained in this study showed that events with critics consequences, about 80%, may occur during the implementation of the containment operation, suggesting the need to prioritize this operation. As a result of the methodology applied in this work, a flowchart the risk series was also obtained. In the flowchart the events that can occur as a consequence of a improper handling of infectious health-care waste, which can cause critical risks such as injuries from sharps and contamination (infection from pathogenic microorganisms, are shown.

Chemical hazards arising from shale gas extraction

Directory of Open Access Journals (Sweden)

Daria Pakulska

2015-02-01

Full Text Available The development of the shale industry is gaining momentum and hence the analysis of chemical hazards to the environment and health of the local population is extremely timely and important. Chemical hazards are created during the exploitation of all minerals, but in the case of shale gas production, there is much more uncertainty as regards to the effects of new technologies application. American experience suggests the increasing risk of environmental contamination, mainly groundwater. The greatest concern is the incomplete knowledge of the composition of fluids used for fracturing shale rock and unpredictability of long-term effects of hydraulic fracturing for the environment and health of residents. High population density in the old continent causes the problem of chemical hazards which is much larger than in the USA. Despite the growing public discontent data on this subject are limited. First of all, there is no epidemiological studies to assess the relationship between risk factors, such as air and water pollution, and health effects in populations living in close proximity to gas wells. The aim of this article is to identify and discuss existing concepts on the sources of environmental contamination, an indication of the environment elements under pressure and potential health risks arising from shale gas extraction. Med Pr 2015;66(1:99–117

Effectuality of Cleaning Workers' Training and Cleaning Enterprises' Chemical Health Hazard Risk Profiling.

Science.gov (United States)

Suleiman, Abdulqadir M; Svendsen, Kristin V H

2015-12-01

Goal-oriented communication of risk of hazards is necessary in order to reduce risk of workers' exposure to chemicals. Adequate training of workers and enterprise priority setting are essential elements. Cleaning enterprises have many challenges and the existing paradigms influence the risk levels of these enterprises. Information on organization and enterprises' prioritization in training programs was gathered from cleaning enterprises. A measure of enterprises' conceptual level of importance of chemical health hazards and a model for working out the risk index (RI) indicating enterprises' conceptual risk level was established and used to categorize the enterprises. In 72.3% of cases, training takes place concurrently with task performances and in 67.4% experienced workers conduct the trainings. There is disparity between employers' opinion on competence level of the workers and reality. Lower conceptual level of importance was observed for cleaning enterprises of different sizes compared with regional safety delegates and occupational hygienists. Risk index values show no difference in risk level between small and large enterprises. Training of cleaning workers lacks the prerequisite for suitability and effectiveness to counter risks of chemical health hazards. There is dereliction of duty by management in the sector resulting in a lack of competence among the cleaning workers. Instituting acceptable easily attainable safety competence level for cleaners will conduce to risk reduction, and enforcement of attainment of the competence level would be a positive step.

78 FR 64735 - Current Good Manufacturing Practice and Hazard Analysis and Risk-Based Preventive Controls for...

Science.gov (United States)

2013-10-29

..., chemical, physical, or radiological contaminates of the food that can cause animal or human health concerns.... The contaminants addressed by the FCP can be hazardous to livestock health and production, pet health... health organizations, and pet food manufacturers, to issue new regulations establishing, among other...

Hazard classification methodology

International Nuclear Information System (INIS)

Brereton, S.J.

1996-01-01

This document outlines the hazard classification methodology used to determine the hazard classification of the NIF LTAB, OAB, and the support facilities on the basis of radionuclides and chemicals. The hazard classification determines the safety analysis requirements for a facility

Preliminary hazard analysis using sequence tree method

International Nuclear Information System (INIS)

Huang Huiwen; Shih Chunkuan; Hung Hungchih; Chen Minghuei; Yih Swu; Lin Jiinming

2007-01-01

A system level PHA using sequence tree method was developed to perform Safety Related digital I and C system SSA. The conventional PHA is a brainstorming session among experts on various portions of the system to identify hazards through discussions. However, this conventional PHA is not a systematic technique, the analysis results strongly depend on the experts' subjective opinions. The analysis quality cannot be appropriately controlled. Thereby, this research developed a system level sequence tree based PHA, which can clarify the relationship among the major digital I and C systems. Two major phases are included in this sequence tree based technique. The first phase uses a table to analyze each event in SAR Chapter 15 for a specific safety related I and C system, such as RPS. The second phase uses sequence tree to recognize what I and C systems are involved in the event, how the safety related systems work, and how the backup systems can be activated to mitigate the consequence if the primary safety systems fail. In the sequence tree, the defense-in-depth echelons, including Control echelon, Reactor trip echelon, ESFAS echelon, and Indication and display echelon, are arranged to construct the sequence tree structure. All the related I and C systems, include digital system and the analog back-up systems are allocated in their specific echelon. By this system centric sequence tree based analysis, not only preliminary hazard can be identified systematically, the vulnerability of the nuclear power plant can also be recognized. Therefore, an effective simplified D3 evaluation can be performed as well. (author)

Analysis of hazardous biological material by MALDI mass spectrometry

Energy Technology Data Exchange (ETDEWEB)

KL Wahl; KH Jarman; NB Valentine; MT Kingsley; CE Petersen; ST Cebula; AJ Saenz

2000-03-21

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-MS) has become a valuable tool for analyzing microorganisms. The speed with which data can be obtained from MALDI-MS makes this a potentially important tool for biological health hazard monitoring and forensic applications. The excitement in the mass spectrometry community in this potential field of application is evident by the expanding list of research laboratories pursuing development of MALDI-MS for bacterial identification. Numerous research groups have demonstrated the ability to obtain unique MALDI-MS spectra from intact bacterial cells and bacterial cell extracts. The ability to differentiate strains of the same species has been investigated. Reproducibility of MALDI-MS spectra from bacterial species under carefully controlled experimental conditions has also been demonstrated. Wang et al. have reported on interlaboratory reproducibility of the MALDI-MS analysis of several bacterial species. However, there are still issues that need to be addressed, including the careful control of experimental parameters for reproducible spectra and selection of optimal experimental parameters such as solvent and matrix.

Development of hazard analysis by critical control points (HACCP) procedures to control organic chemical hazards in the agricultural production of raw food commodities.

Science.gov (United States)

Ropkins, Karl; Ferguson, Andrew; Beck, Angus J

2003-01-01

Hazard Analysis by Critical Control Points (HACCP) is a systematic approach to the identification, assessment, and control of hazards in the food chain. Effective HACCP requires the consideration of all chemical microbiological, and physical hazards. However, current procedures focus primarily on microbiological and physical hazards, while chemical aspects of HACCP have received relatively little attention. In this article we discuss the application of HACCP to organic chemical contaminants and the problems that are likely to be encountered in agriculture. We also present generic templates for the development of organic chemical contaminant HACCP procedures for selected raw food commodities, that is, cereal crops,raw meats, and milk.

Egyptian Environmental Activities and Regulations for Management of Hazardous Substances and Hazardous Wastes

International Nuclear Information System (INIS)

El Zarka, M.

1999-01-01

A substantial use of hazardous substances is essential to meet the social and economic goals of the community in Egypt. Agrochemicals are being used extensively to increase crop yield. The outdated agrochemicals and their empty containers represent a serious environmental problem. Industrial development in different sectors in Egypt obligates handling of huge amounts of hazardous substances and hazardous wastes. The inappropriate handling of such hazardous substances creates several health and environmental problems. Egypt faces many challenges to control safe handling of such substances and wastes. Several regulations are governing handling of hazardous substances in Egypt. The unified Environmental Law 4 for the year 1994 includes a full chapter on the Management of Hazardous Substances and Hazardous Wastes. National and international activities have been taken to manage hazardous substances and hazardous wastes in an environmental sound manner

Factors for assessment of human health risk associated with remedial action at hazardous waste sites

International Nuclear Information System (INIS)

Stephenson, D.E.; King, C.M.; Looney, B.B.; Holmes, W.G.; Gordon, D.E.

1985-01-01

A risk assessment strategy that is cost effective and minimized human health risks was developed for closure of hazardous waste sites at the Savannah River Plant. The strategy consists of (1) site characterization, (2) contaminant transport modeling, and (3) determination of relative merits of alternative remedial actions according to the degree of health protection they provide

Geotourism and volcanoes: health hazards facing tourists at volcanic and geothermal destinations.

Science.gov (United States)

Heggie, Travis W

2009-09-01

Volcano tourism and tourism to geothermal destinations is increasingly popular. If such endeavors are to be a sustainable sector of the tourism industry, tourists must be made aware of the potential health hazards facing them in volcanic environments. With the aim of creating awareness amongst the tourism industry and practitioners of travel medicine, this paper reviews the potential influences and effects of volcanic gases such as carbon dioxide (CO(2)), hydrogen sulfide (H(2)S), sulfur dioxide (SO(2)), and hydrogen chloride/hydrochloric acid (HCl). It also reviews the negative health impacts of tephra and ash, lava flows, landslides, and mudflows. Finally, future research striving to quantify the health risks facing volcano tourists is recommended.

Hazard analysis of Clostridium perfringens in the Skylab Food System

Science.gov (United States)

Bourland, C. T.; Huber, C. S.; Kiser, P. R.; Heidelbaugh, N. D.; Rowley, D. B.

1974-01-01

The Skylab Food System presented unique microbiological problems because food was warmed in null-gravity and because the heat source was limited to 69.4 C (to prevent boiling in null-gravity). For these reasons, the foods were manufactured using critical control point techniques of quality control coupled with appropriate hazard analyses. One of these hazard analyses evaluated the threat from Clostridium perfringens. Samples of food were inoculated with C. perfringens and incubated for 2 h at temperatures ranging from 25 to 55 C. Generation times were determined for the foods at various temperatures. Results of these tests were evaluated taking into consideration: food-borne disease epidemiology, the Skylab food manufacturing procedures, and the performance requirements of the Skylab Food System. Based on this hazard analysis, a limit for C. perfringens of 100/g was established for Skylab foods.

Structural Health Monitoring Analysis for the Orbiter Wing Leading Edge

Science.gov (United States)

Yap, Keng C.

2010-01-01

This viewgraph presentation reviews Structural Health Monitoring Analysis for the Orbiter Wing Leading Edge. The Wing Leading Edge Impact Detection System (WLE IDS) and the Impact Analysis Process are also described to monitor WLE debris threats. The contents include: 1) Risk Management via SHM; 2) Hardware Overview; 3) Instrumentation; 4) Sensor Configuration; 5) Debris Hazard Monitoring; 6) Ascent Response Summary; 7) Response Signal; 8) Distribution of Flight Indications; 9) Probabilistic Risk Analysis (PRA); 10) Model Correlation; 11) Impact Tests; 12) Wing Leading Edge Modeling; 13) Ascent Debris PRA Results; and 14) MM/OD PRA Results.

Critical review of methods for risk ranking of food related hazards, based on risks for human health

DEFF Research Database (Denmark)

van der Fels-Klerx, H. J.; van Asselt, E. D.; Raley, M.

2018-01-01

This study aimed to critically review methods for ranking risks related to food safety and dietary hazards on the basis of their anticipated human health impacts. A literature review was performed to identify and characterize methods for risk ranking from the fields of food, environmental science......, and the risk ranking method characterized. The methods were then clustered - based on their characteristics - into eleven method categories. These categories included: risk assessment, comparative risk assessment, risk ratio method, scoring method, cost of illness, health adjusted life years, multi......-criteria decision analysis, risk matrix, flow charts/decision trees, stated preference techniques and expert synthesis. Method categories were described by their characteristics, weaknesses and strengths, data resources, and fields of applications. It was concluded there is no single best method for risk ranking...

Expert systems for assisting the analysis of hazards

International Nuclear Information System (INIS)

Evrard, J.M.; Martinez, J.M.; Souchet, Y.

1990-01-01

The advantage of applying expert systems in the analysis of safety in the operation of nuclear power plants is discussed. Expert systems apply a method based on a common representation of nuclear power plants. The main steps of the method are summarized. The applications given concern in the following fields: the analysis of hazards in the electric power supplies of a gas-graphite power plant; the evaluation of the availability of safety procedures in a PWR power plant; the search for the sources of leakage in a PWR power plant. The analysis shows that expert systems are a powerful tool in the study of safety of nuclear power plants [fr

Fire hazard analysis for Plutonium Finishing Plant complex

International Nuclear Information System (INIS)

MCKINNIS, D.L.

1999-01-01

A fire hazards analysis (FHA) was performed for the Plutonium Finishing Plant (PFP) Complex at the Department of Energy (DOE) Hanford site. The scope of the FHA focuses on the nuclear facilities/structures in the Complex. The analysis was conducted in accordance with RLID 5480.7, [DOE Directive RLID 5480.7, 1/17/94] and DOE Order 5480.7A, ''Fire Protection'' [DOE Order 5480.7A, 2/17/93] and addresses each of the sixteen principle elements outlined in paragraph 9.a(3) of the Order. The elements are addressed in terms of the fire protection objectives stated in paragraph 4 of DOE 5480.7A. In addition, the FHA also complies with WHC-CM-4-41, Fire Protection Program Manual, Section 3.4 [1994] and WHC-SD-GN-FHA-30001, Rev. 0 [WHC, 1994]. Objectives of the FHA are to determine: (1) the fire hazards that expose the PFP facilities, or that are inherent in the building operations, (2) the adequacy of the fire safety features currently located in the PFP Complex, and (3) the degree of compliance of the facility with specific fire safety provisions in DOE orders, related engineering codes, and standards

The role of the health physicist in the control of airborne radioactive hazards

International Nuclear Information System (INIS)

Basson, J.K.

1978-01-01

Health physics is based on the ease and sensitivity with which ionising radiations can be measured, as well as on the extensive medical knowledge of its long-term effects. Such studies have led to fundamental contributions to scientific health protection as well as practical occupational hygiene. The first aspect is illustrated with aerosol biophysics as example, while the practical control of airborne radioactive hazards in South Africa is described inside uranium plants as well as in the environment of nuclear installations [af

Probabilistic induction of delayed health hazards in occupational radiation workers

International Nuclear Information System (INIS)

Mohamad, M.H.M.; Abdel-Ghani, A.H.

2003-01-01

Occupational radiation workers are periodically monitored for their personal occupational dose. Various types of radiation measurement devices are used, mostly film badges and thermoluminescent dosimeters. Several thousand occupational radiation workers were monitored over a period of seven years (jan. 1995- Dec. 2001). These included atomic energy personnel, nuclear materials personnel, staff of mediology departments (diagnostic, therapeutic and nuclear medicine) and industrial occupational workers handling industrial radiography equipment besides other applications of radiation sources in industry. The probably of induction of health hazards in these radiation workers was assessed using the nominal probability coefficient adopted by the ICRP (1991) for both hereditary effects and cancer induction. In this treatise, data procured are presented and discussed inthe light of basic postulations of probabilistic occurrence of radiation induced delayed health effects

Hazardous medical waste generation rates of different categories of health-care facilities

International Nuclear Information System (INIS)

Komilis, Dimitrios; Fouki, Anastassia; Papadopoulos, Dimitrios

2012-01-01

Highlights: ► We calculated hazardous medical waste generation rates (HMWGR) from 132 hospitals. ► Based on a 22-month study period, HMWGR were highly skewed to the right. ► The HMWGR varied from 0.00124 to 0.718 kg bed −1 d −1 . ► A positive correlation existed between the HMWGR and the number of hospital beds. ► We used non-parametric statistics to compare rates among hospital categories. - Abstract: Goal of this work was to calculate the hazardous medical waste unit generation rates (HMWUGR), in kg bed −1 d −1 , using data from 132 health-care facilities in Greece. The calculations were based on the weights of the hazardous medical wastes that were regularly transferred to the sole medical waste incinerator in Athens over a 22-month period during years 2009 and 2010. The 132 health-care facilities were grouped into public and private ones, and, also, into seven sub-categories, namely: birth, cancer treatment, general, military, pediatric, psychiatric and university hospitals. Results showed that there is a large variability in the HMWUGR, even among hospitals of the same category. Average total HMWUGR varied from 0.012 kg bed −1 d −1 , for the public psychiatric hospitals, to up to 0.72 kg bed −1 d −1 , for the public university hospitals. Within the private hospitals, average HMWUGR ranged from 0.0012 kg bed −1 d −1 , for the psychiatric clinics, to up to 0.49 kg bed −1 d −1 , for the birth clinics. Based on non-parametric statistics, HMWUGR were statistically similar for the birth and general hospitals, in both the public and private sector. The private birth and general hospitals generated statistically more wastes compared to the corresponding public hospitals. The infectious/toxic and toxic medical wastes appear to be 10% and 50% of the total hazardous medical wastes generated by the public cancer treatment and university hospitals, respectively.

Auditable safety analysis and final hazard classification for Buildings 1310-N and 1314-N

International Nuclear Information System (INIS)

Kloster, G.L.

1997-05-01

This document is a graded auditable safety analysis (ASA) of the deactivation activities planned for the 100-N facility segment comprised of the Building 1310-N pump silo (part of the Liquid Radioactive Waste Treatment Facility) and 1314-N Building (Liquid Waste Disposal Building).The ASA describes the hazards within the facility and evaluates the adequacy of the measures taken to reduce, control, or mitigate the identified hazards. This document also serves as the Final Hazard Classification (FHC) for the 1310-N pump silo and 1314-N Building segment. The FHC is radiological based on the Preliminary Hazard Classification and the total inventory of radioactive and hazardous materials in the segment

Identification of Potential Hazard using Hazard Identification and Risk Assessment

Science.gov (United States)

Sari, R. M.; Syahputri, K.; Rizkya, I.; Siregar, I.

2017-03-01

This research was conducted in the paper production’s company. These Paper products will be used as a cigarette paper. Along in the production’s process, Company provides the machines and equipment that operated by workers. During the operations, all workers may potentially injured. It known as a potential hazard. Hazard identification and risk assessment is one part of a safety and health program in the stage of risk management. This is very important as part of efforts to prevent occupational injuries and diseases resulting from work. This research is experiencing a problem that is not the identification of potential hazards and risks that would be faced by workers during the running production process. The purpose of this study was to identify the potential hazards by using hazard identification and risk assessment methods. Risk assessment is done using severity criteria and the probability of an accident. According to the research there are 23 potential hazard that occurs with varying severity and probability. Then made the determination Risk Assessment Code (RAC) for each potential hazard, and gained 3 extreme risks, 10 high risks, 6 medium risks and 3 low risks. We have successfully identified potential hazard using RAC.

Analytical Diagnostics of Non-Optimal Use of Pesticides and Health Hazards for Vegetable Pickers

International Nuclear Information System (INIS)

Zafar, M.; Mehmood, T.; Baig, I. A.; Saboor, A.; Sadiq, S.; Mahmood, K.

2016-01-01

Economically pesticides are meant to control pests in the fields. Up to certain optimal use of a typical pesticide, it enhances the yield of crops and vegetables. But, eventually amplified use of pesticides results in contamination of environment (water, soil, and air) and increase the health cost of vegetable pickers. The purpose of this study is to estimate the excessive use of pesticides and economic cost of health hazards for the vegetable pickers in district Vehari. Data from 90 respondents were collected and analyzed. The most common health problems identified during the survey were headache, eye irritation, skin infection, cough and shortness of breath. Health cost consists of costs related to precautionary measure, medication, traveling, the opportunity cost of attended persons and productivity loss. The mean health cost of vegetable pickers in the study area was about Rs. 385 per picker per year. Health cost model was used to measure the health cost of vegetable pickers. The regression results showed that pesticides were being applied non-optimally in the study area i.e., number of pesticide applications for vegetables (7-31) were substantially higher than the recommended dose. Health cost function was significantly different from zero as indicated by F-stat (32.18) and it is also supported by R/sup 2/ that about 70 percent variation in health cost is explained by medication accompanied by productivity loss (Rs. 223), precautionary measure (Rs. 134), attended person cost (Rs. 14) and traveling expenditures (Rs. 16). Hence, strict legislation is required to overcome the availability of hazardous pesticides and to keep the vegetable pickers aware of the optimal use of pesticides through appropriate extension services. (author)

Developing regulations for occupational exposures to health hazards in Malaysia.

Science.gov (United States)

Rampal, Krishna Gopal; Mohd Nizam, J

2006-11-01

In Malaysia exposures in the workplace are regulated under the Factories and Machinery Act (FMA), 1967 and also under the more comprehensive Occupational Safety and Health Act (OSHA) enacted in 1994. With OSHA 1994 the philosophy of legislating safety and health in the workplace changed from one that was very prescriptive and containing detailed technical provisions under FMA, 1967 to one that is more flexible and encourages self-regulation under OSHA 1994. OSHA 1994 is supported by regulations, codes of practices and guidelines to further clarify the provisions in the Act. Under the FMA 1967 emphasis was on safety while with OSHA 1994 there has been equal emphasis on addressing health hazards in the workplace. Regulations for occupational exposures are developed by the Department of Occupational Safety and Health with tripartite and stakeholder consultation. When developing these regulations International Labor Organization Conventions, laws of other countries and occupational exposure standards adopted internationally are reviewed. The government also conducts surveys to collect information on both exposures and health effects in workplaces to have better understanding on specific occupational health problems. Effective law enforcement is crucial in ensuring compliance to safety and health law. The challenge at the moment is to ensure all employers and employees, particularly those in the small and medium enterprises, understand and comply with the provisions stipulated in the legislation.

Differential Exposure to Hazardous Air Pollution in the United States: A Multilevel Analysis of Urbanization and Neighborhood Socioeconomic Deprivation

Directory of Open Access Journals (Sweden)

Frank C. Curriero

2012-06-01

Full Text Available Population exposure to multiple chemicals in air presents significant challenges for environmental public health. Air quality regulations distinguish criteria air pollutants (CAPs (e.g., ozone, PM2.5 from hazardous air pollutants (HAPs—187 chemicals which include carcinogens and others that are associated with respiratory, cardiovascular, neurological and numerous other non-cancer health effects. Evidence of the public’s cumulative exposure and the health effects of HAPs are quite limited. A multilevel model is used to assess differential exposure to HAP respiratory, neurological, and cancer hazards (2005 related to the Townsend Index of Socioeconomic Deprivation (TSI, after adjustment for regional population size and economic activity, and local population density. We found significant positive associations between tract TSI and respiratory and cancer HAP exposure hazards, and smaller effects for neurological HAPs. Tracts in the top quintile of TSI have between 38%–60% higher HAP exposure than the bottom quintile; increasing population size from the bottom quintile to the top quintile modifies HAP exposure hazard related to TSI, increasing cancer HAP exposure hazard by 6% to 20% and increasing respiratory HAP exposure hazard by 12% to 27%. This study demonstrates the value of social epidemiological methods for analyzing differential exposure and advancing cumulative risk assessment.

Differential exposure to hazardous air pollution in the United States: a multilevel analysis of urbanization and neighborhood socioeconomic deprivation.

Science.gov (United States)

Young, Gary S; Fox, Mary A; Trush, Michael; Kanarek, Norma; Glass, Thomas A; Curriero, Frank C

2012-06-01

Population exposure to multiple chemicals in air presents significant challenges for environmental public health. Air quality regulations distinguish criteria air pollutants (CAPs) (e.g., ozone, PM2.5) from hazardous air pollutants (HAPs)-187 chemicals which include carcinogens and others that are associated with respiratory, cardiovascular, neurological and numerous other non-cancer health effects. Evidence of the public's cumulative exposure and the health effects of HAPs are quite limited. A multilevel model is used to assess differential exposure to HAP respiratory, neurological, and cancer hazards (2005) related to the Townsend Index of Socioeconomic Deprivation (TSI), after adjustment for regional population size and economic activity, and local population density. We found significant positive associations between tract TSI and respiratory and cancer HAP exposure hazards, and smaller effects for neurological HAPs. Tracts in the top quintile of TSI have between 38%-60% higher HAP exposure than the bottom quintile; increasing population size from the bottom quintile to the top quintile modifies HAP exposure hazard related to TSI, increasing cancer HAP exposure hazard by 6% to 20% and increasing respiratory HAP exposure hazard by 12% to 27%. This study demonstrates the value of social epidemiological methods for analyzing differential exposure and advancing cumulative risk assessment.

Developing a HACCP-like system for improving animal health and welfare in organic egg production - based on an expert panel analysis

DEFF Research Database (Denmark)

Hegelund, Lene; Sørensen, Jan Tind

2007-01-01

In the process of developing a generic Hazard Analysis and Critical Control Point (HACCP)-like system for securing animal health and welfare in organic egg production, an expert panel analysis was used to perform the initial hazard analysis. Eighteen advisers and researchers in organic egg...... specific systems. An expert panel analysis based on questionnaires was a useful tool during the first steps of developing a HACCP plan, conducting a hazard analysis and suggesting control points. However, care should be taken regarding the panel's size and fields of expertise in order to assure...... that the panel fully covers the field of interest throughout the study. A further development of the hazard analysis into a farm-specific HACCP system would include assembling an on-farm HACCP team consisting of farmers and advisors for the practical application of control points, alarm values and monitoring...

Neo-Deterministic and Probabilistic Seismic Hazard Assessments: a Comparative Analysis

Science.gov (United States)

Peresan, Antonella; Magrin, Andrea; Nekrasova, Anastasia; Kossobokov, Vladimir; Panza, Giuliano F.

2016-04-01

Objective testing is the key issue towards any reliable seismic hazard assessment (SHA). Different earthquake hazard maps must demonstrate their capability in anticipating ground shaking from future strong earthquakes before an appropriate use for different purposes - such as engineering design, insurance, and emergency management. Quantitative assessment of maps performances is an essential step also in scientific process of their revision and possible improvement. Cross-checking of probabilistic models with available observations and independent physics based models is recognized as major validation procedure. The existing maps from the classical probabilistic seismic hazard analysis (PSHA), as well as those from the neo-deterministic analysis (NDSHA), which have been already developed for several regions worldwide (including Italy, India and North Africa), are considered to exemplify the possibilities of the cross-comparative analysis in spotting out limits and advantages of different methods. Where the data permit, a comparative analysis versus the documented seismic activity observed in reality is carried out, showing how available observations about past earthquakes can contribute to assess performances of the different methods. Neo-deterministic refers to a scenario-based approach, which allows for consideration of a wide range of possible earthquake sources as the starting point for scenarios constructed via full waveforms modeling. The method does not make use of empirical attenuation models (i.e. Ground Motion Prediction Equations, GMPE) and naturally supplies realistic time series of ground shaking (i.e. complete synthetic seismograms), readily applicable to complete engineering analysis and other mitigation actions. The standard NDSHA maps provide reliable envelope estimates of maximum seismic ground motion from a wide set of possible scenario earthquakes, including the largest deterministically or historically defined credible earthquake. In addition

Vaginal douching by women with vulvovaginitis and relation to reproductive health hazards.

Science.gov (United States)

Shaaban, Omar M; Youssef, Alaa Eldin A; Khodry, Mostafa M; Mostafa, Sayed A

2013-05-14

Vaginal douching (VD) is a common practice among married women all over the world specially those in the Middle East. It is used for personal hygiene or for other aesthetic reasons in many countries. The current study investigates the prevalence of VD among patients with vulvovaginitis in Egypt. It also compares the reproductive health hazards among women performing routine VD with those using external hygiene. It also investigates why, and how women practice this douching. A cross sectional observational study was conducted in a tertiary university affiliated hospital in Assiut, Egypt. An interview administered questionnaire was administered to 620 women by two trained clinic nurses. Women presented to the outpatient clinic and diagnosed to have any type of vaginal infections were approached for participation. The principle outcome was the history of preterm labor in women who routinely performed VD versus those who did not (upon which sample size was estimated). Other outcome measures were the types of vaginal infections, and reproductive implications comprising, ectopic pregnancy, abortion and pelvic inflammatory disease (PID). The participants were predominantly multiparas from semi-urban background and middle socioeconomic level. Considering VD as a religious duty and a kind of personal cleanliness were the most common reasons for performing VD in 88.9% and 80.6% of the studied population, respectively. History of preterm labor was reported in 19.2% versus 11.9% (p=0.048), while history of PID in 13.2% versus 6.0% (p=0.008) in women performing VD compared to those not performing this habit, respectively. There were no significant differences between the two groups as regard the history of ectopic pregnancy or the number of previous abortions. Vaginal douching is a prevalent practice in Egypt and has traditional and religious roots within the community. There are many misbeliefs around this habit in Egypt. Vaginal douching increases certain reproductive health

Evaluation of an active learning module to teach hazard and risk in Hazard Analysis and Critical Control Points (HACCP classes

Directory of Open Access Journals (Sweden)

Omar A. Oyarzabal

2017-04-01

Full Text Available The terms hazard and risk are significant building blocks for the organization of risk-based food safety plans. Unfortunately, these terms are not clear for some personnel working in food manufacturing facilities. In addition, there are few examples of active learning modules for teaching adult participants the principles of hazard analysis and critical control points (HACCP. In this study, we evaluated the effectiveness of an active learning module to teach hazard and risk to participants of HACCP classes provided by the University of Vermont Extension in 2015 and 2016. This interactive module is comprised of a questionnaire; group playing of a dice game that we have previously introduced in the teaching of HACCP; the discussion of the terms hazard and risk; and a self-assessment questionnaire to evaluate the teaching of hazard and risk. From 71 adult participants that completed this module, 40 participants (56% provided the most appropriate definition of hazard, 19 participants (27% provided the most appropriate definition of risk, 14 participants (20% provided the most appropriate definitions of both hazard and risk, and 23 participants (32% did not provide an appropriate definition for hazard or risk. Self-assessment data showed an improvement in the understanding of these terms (P < 0.05. Thirty participants (42% stated that the most valuable thing they learned with this interactive module was the difference between hazard and risk, and 40 participants (65% responded that they did not attend similar presentations in the past. The fact that less than one third of the participants answered properly to the definitions of hazard and risk at baseline is not surprising. However, these results highlight the need for the incorporation of modules to discuss these important food safety terms and include more active learning modules to teach food safety classes. This study suggests that active learning helps food personnel better understand important

SHEAT: a computer code for probabilistic seismic hazard analysis, user's manual

International Nuclear Information System (INIS)

Ebisawa, Katsumi; Kondo, Masaaki; Abe, Kiyoharu; Tanaka, Toshiaki; Takani, Michio.

1994-08-01

The SHEAT code developed at Japan Atomic Energy Research Institute is for probabilistic seismic hazard analysis which is one of the tasks needed for seismic Probabilistic Safety Assessment (PSA) of a nuclear power plant. Seismic hazard is defined as an annual exceedance frequency of occurrence of earthquake ground motions at various levels of intensity at a given site. With the SHEAT code, seismic hazard is calculated by the following two steps: (1) Modeling of earthquake generation around a site. Future earthquake generation (locations, magnitudes and frequencies of postulated earthquakes) is modelled based on the historical earthquake records, active fault data and expert judgement. (2) Calculation of probabilistic seismic hazard at the site. An earthquake ground motion is calculated for each postulated earthquake using an attenuation model taking into account its standard deviation. Then the seismic hazard at the site is calculated by summing the frequencies of ground motions by all the earthquakes. This document is the user's manual of the SHEAT code. It includes: (1) Outlines of the code, which include overall concept, logical process, code structure, data file used and special characteristics of the code, (2) Functions of subprograms and analytical models in them, (3) Guidance of input and output data, and (4) Sample run results. The code has widely been used at JAERI to analyze seismic hazard at various nuclear power plant sites in japan. (author)

DOE Hazardous Waste Program

International Nuclear Information System (INIS)

Eyman, L.D.; Craig, R.B.

1985-01-01

The goal of the DOE Hazardous Waste Program is to support the implementation and improvement of hazardous-chemical and mixed-radioactive-waste management such that public health, safety, and the environment are protected and DOE missions are effectively accomplished. The strategy for accomplishing this goal is to define the character and magnitude of hazardous wastes emanating from DOE facilities, determine what DOE resources are available to address these problems, define the regulatory and operational constraints, and develop programs and plans to resolve hazardous waste issues. Over the longer term the program will support the adaptation and application of technologies to meet hazardous waste management needs and to implement an integrated, DOE-wide hazardous waste management strategy. 1 reference, 1 figure

Hazard Communication Standard

International Nuclear Information System (INIS)

Sichak, S.

1991-01-01

The current rate of technological advances has brought with it an overwhelming increase in the usage of chemicals in the workplace and in the home. Coupled to this increase has been a heightened awareness in the potential for acute and chronic injuries attributable to chemical insults. The Hazard Communication Standard has been introduced with the desired goal of reducing workplace exposures to hazardous substances and thereby achieving a corresponding reduction in adverse health effects. It was created and proclaimed by the US Department of Labor and regulated by the Occupational Safety and Health Administration. 1 tab

Safety and Equality at Odds: OSHA and Title VII Clash over Health Hazards in the Workplace.

Science.gov (United States)

Crowell, Donald R.; Copus, David A.

1978-01-01

Discusses the legal problems presented by job health hazards which have a different effect on men and women. Where methods of eliminating or minimizing exposure, as required by the Occupational Safety and Health Act, affect only one sex, the provisions of Title VII of the Civil Rights Act may be violated. (MF)

Environmental Health and Safety Hazards of Indigenous Small-Scale Gold Mining Using Cyanidation in the Philippines.

Science.gov (United States)

Leung, Ana Marie R; Lu, Jinky Leilanie Dp

2016-01-01

This cross-sectional study aimed at the environmental health hazards at work and cyanide exposure of small-scale gold miners engaged in gold extraction from ores in a mining area in the Philippines. Methods consisted of structured questionnaire-guided interviews, work process observation tools, physical health assessment by medical doctors, and laboratory examination and blood cyanide determination in the blood samples of 34 indigenous small-scale gold miners from Benguet, Philippines. The small-scale gold miners worked for a mean of 10.3 years, had a mean age of 36 years, with mean lifetime mining work hours of 18,564. All were involved in tunneling work (100%) while a considerable number were involved in mixing cyanide with the ore (44%). A considerable number were injured (35%) during the mining activity, and an alarming number (35%) had elevated blood cyanide level. The most prevalent hazard was exposure to chemicals, particularly to cyanide and nitric acid, which were usually handled with bare hands. The small-scale gold miners were exposed to occupational and environmental hazards at work.

Environmental Health and Safety Hazards of Indigenous Small-Scale Gold Mining Using Cyanidation in the Philippines

Science.gov (United States)

Leung, Ana Marie R.; Lu, Jinky Leilanie DP.

2016-01-01

OBJECTIVES This cross-sectional study aimed at the environmental health hazards at work and cyanide exposure of small-scale gold miners engaged in gold extraction from ores in a mining area in the Philippines. METHODS Methods consisted of structured questionnaire-guided interviews, work process observation tools, physical health assessment by medical doctors, and laboratory examination and blood cyanide determination in the blood samples of 34 indigenous small-scale gold miners from Benguet, Philippines. RESULTS The small-scale gold miners worked for a mean of 10.3 years, had a mean age of 36 years, with mean lifetime mining work hours of 18,564. All were involved in tunneling work (100%) while a considerable number were involved in mixing cyanide with the ore (44%). A considerable number were injured (35%) during the mining activity, and an alarming number (35%) had elevated blood cyanide level. The most prevalent hazard was exposure to chemicals, particularly to cyanide and nitric acid, which were usually handled with bare hands. CONCLUSION The small-scale gold miners were exposed to occupational and environmental hazards at work. PMID:27547035

78 FR 48636 - Current Good Manufacturing Practice and Hazard Analysis and Risk-Based Preventive Controls for...

Science.gov (United States)

2013-08-09

... collection related to the proposed rule, ``Current Good Manufacturing Practice and Hazard Analysis and Risk... period. These two proposals are related to the proposed rule ``Current Good Manufacturing Practice and... final extension of the comment period for the ``Current Good Manufacturing Practice and Hazard Analysis...

78 FR 9311 - Hazard Communication; Corrections and Technical Amendment

Science.gov (United States)

2013-02-08

....1044, Appendix Reference to ``Class IIIA combustible B. liquid'' is corrected to ``Category 4 flammable..., Fire prevention, Hazard communication, Hazardous substances, Occupational safety and health. 29 CFR... Asbestos, Construction industry, Fire prevention, Hazardous substances, Occupational safety and health...

A Sensitivity Study for an Evaluation of Input Parameters Effect on a Preliminary Probabilistic Tsunami Hazard Analysis

Energy Technology Data Exchange (ETDEWEB)

Rhee, Hyun-Me; Kim, Min Kyu; Choi, In-Kil [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Sheen, Dong-Hoon [Chonnam National University, Gwangju (Korea, Republic of)

2014-10-15

The tsunami hazard analysis has been based on the seismic hazard analysis. The seismic hazard analysis has been performed by using the deterministic method and the probabilistic method. To consider the uncertainties in hazard analysis, the probabilistic method has been regarded as attractive approach. The various parameters and their weight are considered by using the logic tree approach in the probabilistic method. The uncertainties of parameters should be suggested by analyzing the sensitivity because the various parameters are used in the hazard analysis. To apply the probabilistic tsunami hazard analysis, the preliminary study for the Ulchin NPP site had been performed. The information on the fault sources which was published by the Atomic Energy Society of Japan (AESJ) had been used in the preliminary study. The tsunami propagation was simulated by using the TSUNAMI{sub 1}.0 which was developed by Japan Nuclear Energy Safety Organization (JNES). The wave parameters have been estimated from the result of tsunami simulation. In this study, the sensitivity analysis for the fault sources which were selected in the previous studies has been performed. To analyze the effect of the parameters, the sensitivity analysis for the E3 fault source which was published by AESJ was performed. The effect of the recurrence interval, the potential maximum magnitude, and the beta were suggested by the sensitivity analysis results. Level of annual exceedance probability has been affected by the recurrence interval.. Wave heights have been influenced by the potential maximum magnitude and the beta. In the future, the sensitivity analysis for the all fault sources in the western part of Japan which were published AESJ would be performed.

Hazard management at the workplace

International Nuclear Information System (INIS)

Hasfazilah Hassan; Azimawati Ahmad; Syed Asraf Fahlawi Wafa S M Ghazi; Hairul Nizam Idris

2005-01-01

Failure to ensure health and safety environment at workplace will cause an accident involving loss to the time, human resource, finance and for the worse case effect the moral value of an organization. If we go through to the cause of the accident, it is impossible to have a totally safety workplace. It is because every process in work activities has it own hazard elements. The purpose of this paper is to discuss the best action to prevent from the hazard with a comprehensive and effectiveness hazard management. Hazard management is the one of the pro-active hazard control. With this we manage to identify and evaluate the hazard and control the hazard risk. Therefore, hazard management should be screened constantly and continuously to make sure work hazard always in control. (Author)

Hazards assessment for the Hazardous Waste Storage Facility

International Nuclear Information System (INIS)

Knudsen, J.K.; Calley, M.B.

1994-04-01

This report documents the hazards assessment for the Hazardous Waste Storage Facility (HWSF) located at the Idaho National Engineering Laboratory. The hazards assessment was performed to ensure that this facility complies with DOE and company requirements pertaining to emergency planning and preparedness for operational emergencies. The hazards assessment identifies and analyzes hazards that are significant enough to warrant consideration in a facility's operational emergency management program. The area surrounding HWSF, the buildings and structures at HWSF, and the processes used at HWSF are described in this report. All nonradiological hazardous materials at the HWSF were identified (radiological hazardous materials are not stored at HWSF) and screened against threshold quantities according to DOE Order 5500.3A guidance. Two of the identified hazardous materials exceeded their specified threshold quantity. This report discusses the potential release scenarios and consequences associated with an accidental release for each of the two identified hazardous materials, lead and mercury. Emergency considerations, such as emergency planning zones, emergency classes, protective actions, and emergency action levels, are also discussed based on the analysis of potential consequences. Evaluation of the potential consequences indicated that the highest emergency class for operational emergencies at the HWSF would be a Site Area Emergency

Grand Junction projects office mixed-waste treatment program, VAC*TRAX mobile treatment unit process hazards analysis

International Nuclear Information System (INIS)

Bloom, R.R.

1996-04-01

The objective of this report is to demonstrate that a thorough assessment of the risks associated with the operation of the Rust Geotech patented VAC*TRAX mobile treatment unit (MTU) has been performed and documented. The MTU was developed to treat mixed wastes at the US Department of Energy (DOE) Albuquerque Operations Office sites. The MTU uses an indirectly heated, batch vacuum dryer to thermally desorb organic compounds from mixed wastes. This process hazards analysis evaluated 102 potential hazards. The three significant hazards identified involved the inclusion of oxygen in a process that also included an ignition source and fuel. Changes to the design of the MTU were made concurrent with the hazard identification and analysis; all hazards with initial risk rankings of 1 or 2 were reduced to acceptable risk rankings of 3 or 4. The overall risk to any population group from operation of the MTU was determined to be very low; the MTU is classified as a Radiological Facility with low hazards

Grand Junction projects office mixed-waste treatment program, VAC*TRAX mobile treatment unit process hazards analysis

Energy Technology Data Exchange (ETDEWEB)

Bloom, R.R.

1996-04-01

The objective of this report is to demonstrate that a thorough assessment of the risks associated with the operation of the Rust Geotech patented VAC*TRAX mobile treatment unit (MTU) has been performed and documented. The MTU was developed to treat mixed wastes at the US Department of Energy (DOE) Albuquerque Operations Office sites. The MTU uses an indirectly heated, batch vacuum dryer to thermally desorb organic compounds from mixed wastes. This process hazards analysis evaluated 102 potential hazards. The three significant hazards identified involved the inclusion of oxygen in a process that also included an ignition source and fuel. Changes to the design of the MTU were made concurrent with the hazard identification and analysis; all hazards with initial risk rankings of 1 or 2 were reduced to acceptable risk rankings of 3 or 4. The overall risk to any population group from operation of the MTU was determined to be very low; the MTU is classified as a Radiological Facility with low hazards.

New York hazardous substances emergency events surveillance: learning from hazardous substances releases to improve safety

International Nuclear Information System (INIS)

Welles, Wanda Lizak; Wilburn, Rebecca E.; Ehrlich, Jenny K.; Floridia, Christina M.

2004-01-01

Since 1993, the New York State Department of Health, funded by the Agency for Toxic Substances and Disease Registry, has collected data about non-petroleum hazardous substances releases through the Hazardous Substances Emergency Events Surveillance (NYHSEES) project. This study investigates risk factors for hazardous substances releases that may result in public health consequences such as injury or reported health effects. The 6428 qualifying events that occurred during the 10-year-period of 1993-2002 involved 8838 hazardous substances, 842 evacuations, more than 75,419 people evacuated, and more than 3120 people decontaminated. These events occurred both at fixed facilities (79%) and during transport (21%). The causative factors most frequently contributing to reported events were equipment failure (39%) and human error (33%). Five of the 10 chemicals most frequently associated with injuries were also among the 10 chemicals most frequently involved in reported events: sulfuric acid, hydrochloric acid, ammonia, sodium hypochlorite, and carbon monoxide. The chemical categories most frequently associated with events, and with events with adverse health effects were volatile organic compounds (VOCs) and solvents, and acids. Events with releases of hazardous substances were associated with injuries to 3089 people including employees (37%), responders (12%), the general public (29%) and students (22%). The most frequently reported adverse health effects were respiratory irritation, headache, and nausea or vomiting. Most of the injured were transported to the hospital, treated, and released (55%) or treated at the scene (29%). These data have been used for emergency response training, planning, and prevention activities to reduce morbidity and mortality from future events

Survey of potential health and safety hazards of commercial-scale ethanol production facilities

Energy Technology Data Exchange (ETDEWEB)

Watson, A.P.; Smith, J.G.; Elmore, J.L.

1982-04-01

Generic safety and health aspects of commercial-scale (60 to 600 million L/y) anhydrous ethanol production were identified. Several common feedstocks (grains, roots and fibers, and sugarcane) and fuels (coal, natural gas, wood, and bagasse) were evaluated throughout each step of generic plant operation, from initial milling and sizing through saccharification, fermentation, distillation, and stillage disposal. The fermentation, digestion, or combustion phases are not particularly hazardous, although the strong acids and bases used for hydrolysis and pH adjustment should be handled with the same precautions that every industrial solvent deserves. The most serious safety hazard is that of explosion from grain dust or ethanol fume ignition and boiler/steam line overpressurization. Inhalation of ethanol and carbon dioxide vapors may cause intoxication or asphyxiation in unventilated areas, which could be particularly hazardous near equipment controls and agitating vats. Contact with low-pressure process steam would produce scalding burns. Benzene, used in stripping water from ethanol in the final distillation column, is a suspected leukemogen. Substitution of this fluid by alternative liquids is addressed.

Fire hazard analysis for Plutonium Finishing Plant complex

Energy Technology Data Exchange (ETDEWEB)

MCKINNIS, D.L.

1999-02-23

A fire hazards analysis (FHA) was performed for the Plutonium Finishing Plant (PFP) Complex at the Department of Energy (DOE) Hanford site. The scope of the FHA focuses on the nuclear facilities/structures in the Complex. The analysis was conducted in accordance with RLID 5480.7, [DOE Directive RLID 5480.7, 1/17/94] and DOE Order 5480.7A, ''Fire Protection'' [DOE Order 5480.7A, 2/17/93] and addresses each of the sixteen principle elements outlined in paragraph 9.a(3) of the Order. The elements are addressed in terms of the fire protection objectives stated in paragraph 4 of DOE 5480.7A. In addition, the FHA also complies with WHC-CM-4-41, Fire Protection Program Manual, Section 3.4 [1994] and WHC-SD-GN-FHA-30001, Rev. 0 [WHC, 1994]. Objectives of the FHA are to determine: (1) the fire hazards that expose the PFP facilities, or that are inherent in the building operations, (2) the adequacy of the fire safety features currently located in the PFP Complex, and (3) the degree of compliance of the facility with specific fire safety provisions in DOE orders, related engineering codes, and standards.

LIFE CYCLE ASSESSMENT AND HAZARD ANALYSIS AND CRITICAL CONTROL POINTS TO THE PASTA PRODUCT

Directory of Open Access Journals (Sweden)

Yulexis Meneses Linares

2016-10-01

Full Text Available The objective of this work is to combine the Life Cycle Assessment (LCA and Hazard Analysis and Critical Control Points (HACCP methodologies for the determination of risks that the food production represents to the human health and the ecosystem. The environmental performance of the production of pastas in the “Marta Abreu” Pasta Factory of Cienfuegos is assessed, where the critical control points determined by the biological dangers (mushrooms and plagues and the physical dangers (wood, paper, thread and ferromagnetic particles were the raw materials: flour, semolina and its mixtures, and the disposition and extraction of them. Resources are the most affected damage category due to the consumption of fossil fuels.

Risk assessment for the transportation of hazardous waste and hazardous waste components of low-level mixed waste and transuranic waste for the US Department of Energy waste management programmatic environmental impact statement

International Nuclear Information System (INIS)

Lazaro, M.A.; Policastro, A.J.; Hartmann, H.M.; Chang, Y.S.

1996-12-01

This report, a supplement to Appendix E (Transportation Risk) of the U.S. Department of Energy Waste Management Programmatic Environmental Impact Statement (WM PEIS), provides additional information supporting the accident data for chemical risk assessment and health risk methodology described in that appendix (Part II) and presents the uncertainty analysis and on-site risk calculations. This report focuses on hazardous material truck accident rates, release probabilities, and release quantities; provides the toxicological values derived for each hazardous chemical assessed in the WM PEIS and further details on the derivation of health criteria; describes the method used in the transportation risk assessments to address potential additivity of health effects from simultaneous exposure to several chemicals and the method used to address transportation risks for maximally exposed individuals; presents an expanded discussion of the uncertainty associated with transportation risk calculations; and includes the results of the on-site transportation risk analysis. In addition, two addenda are provided to detail the risk assessments conducted for the hazardous components of low-level mixed waste (Addendum I) and transuranic waste (Addendum II)

Human health hazard from antimicrobial-resistant enterococci in animals and food

DEFF Research Database (Denmark)

Heuer, Ole Eske; Hammerum, Anette Marie; Collignon, P.

2006-01-01

The use of antimicrobial agents in the modern farm industry has created a reservoir of resistant bacteria in food animals. Foods of animal origin are often contaminated with enterococci that are likely to contribute resistance genes, virulence factors, or other properties to enterococci IN humans....... The potential hazard to human health from antimicrobial-resistant enterococci in animals is questioned by some scientists because of evidence of host specificity of enterococci. Similarly, the occurrences of specific nosocomial clones of enterococci in hospitals have lead to the misconception that antimicrobial-resistant...... to change the current view that antimicrobial-resistant enterococci from animals pose a threat to human health. On the contrary, antimicrobial resistance genes appear to spread freely between enterococci from different reservoirs, irrespective of their apparent host association....

78 FR 64425 - Current Good Manufacturing Practice and Hazard Analysis and Risk-Based Preventive Controls for...

Science.gov (United States)

2013-10-29

..., 507, and 579 [Docket No. FDA-2011-N-0922] Current Good Manufacturing Practice and Hazard Analysis and... requirements for current good manufacturing practice and hazard analysis and risk-based preventive controls for..., packing, or holding of animal food in two ways. First, it would create new current good manufacturing...

Seismic Hazard characterization study using an earthquake source with Probabilistic Seismic Hazard Analysis (PSHA) method in the Northern of Sumatra

International Nuclear Information System (INIS)

Yahya, A.; Palupi, M. I. R.; Suharsono

2016-01-01

Sumatra region is one of the earthquake-prone areas in Indonesia because it is lie on an active tectonic zone. In 2004 there is earthquake with a moment magnitude of 9.2 located on the coast with the distance 160 km in the west of Nanggroe Aceh Darussalam and triggering a tsunami. These events take a lot of casualties and material losses, especially in the Province of Nanggroe Aceh Darussalam and North Sumatra. To minimize the impact of the earthquake disaster, a fundamental assessment of the earthquake hazard in the region is needed. Stages of research include the study of literature, collection and processing of seismic data, seismic source characterization and analysis of earthquake hazard by probabilistic methods (PSHA) used earthquake catalog from 1907 through 2014. The earthquake hazard represented by the value of Peak Ground Acceleration (PGA) and Spectral Acceleration (SA) in the period of 0.2 and 1 second on bedrock that is presented in the form of a map with a return period of 2475 years and the earthquake hazard curves for the city of Medan and Banda Aceh. (paper)

Implementation of hazard analysis and critical control point (HACCP) in dried anchovy production process

Science.gov (United States)

Citraresmi, A. D. P.; Wahyuni, E. E.

2018-03-01

The aim of this study was to inspect the implementation of Hazard Analysis and Critical Control Point (HACCP) for identification and prevention of potential hazards in the production process of dried anchovy at PT. Kelola Mina Laut (KML), Lobuk unit, Sumenep. Cold storage process is needed in each anchovy processing step in order to maintain its physical and chemical condition. In addition, the implementation of quality assurance system should be undertaken to maintain product quality. The research was conducted using a survey method, by following the whole process of making anchovy from the receiving raw materials to the packaging of final product. The method of data analysis used was descriptive analysis method. Implementation of HACCP at PT. KML, Lobuk unit, Sumenep was conducted by applying Pre Requisite Programs (PRP) and preparation stage consisting of 5 initial stages and 7 principles of HACCP. The results showed that CCP was found in boiling process flow with significant hazard of Listeria monocytogenesis bacteria and final sorting process with significant hazard of foreign material contamination in the product. Actions taken were controlling boiling temperature of 100 – 105°C for 3 - 5 minutes and training for sorting process employees.

A hazard and probabilistic safety analysis of a high-level waste transfer process

International Nuclear Information System (INIS)

Bott, T.F.; Sasser, M.K.

1996-01-01

This paper describes a safety analysis of a transfer process for high-level radioactive and toxic waste. The analysis began with a hazard assessment that used elements of What If, Checklist, Failure Modes and Effects Analysis, and Hazards and Operability Study (HAZOP) techniques to identify and rough-in accident sequences. Based on this preliminary analysis, the most significant accident sequences were developed further using event trees. Quantitative frequency estimates for the accident sequences were based on operational data taken from the historical record of the site where the process is performed. Several modeling challenges were encountered in the course of the study. These included linked initiating and accident progression events, fire propagation modeling, accounting for administrative control violations, and handling mission-phase effects

Hydrology Analysis and Modelling for Klang River Basin Flood Hazard Map

Science.gov (United States)

Sidek, L. M.; Rostam, N. E.; Hidayah, B.; Roseli, ZA; Majid, W. H. A. W. A.; Zahari, N. Z.; Salleh, S. H. M.; Ahmad, R. D. R.; Ahmad, M. N.

2016-03-01

Flooding, a common environmental hazard worldwide has in recent times, increased as a result of climate change and urbanization with the effects felt more in developing countries. As a result, the explosive of flooding to Tenaga Nasional Berhad (TNB) substation is increased rapidly due to existing substations are located in flood prone area. By understanding the impact of flood to their substation, TNB has provided the non-structure mitigation with the integration of Flood Hazard Map with their substation. Hydrology analysis is the important part in providing runoff as the input for the hydraulic part.

A policy analysis of the problem of the reproductive health of women in the workplace.

Science.gov (United States)

Kotch, J B; Ossler, C C; Howze, D C

1984-06-01

Many occupations in which women comprise the majority of the workforce involve exposure to biological, physical, and chemical hazards. Potential reproductive effects of work-related substances include impaired reproductive capacity, mutagenesis, teratogenesis, and transplacental carcinogenesis. However, female-dominated occupations tend to be only minimally regulated by the US Occupational Safety and Health Administration, and the corporate response to the issue of reproductive and fetal health has been to institute "protective discrimination policies" such as the demotion or exclusion of women of childbearing age from certain jobs. This article rates the effectiveness of alternate policy responses to increase women's occupational health and safety through use of a series of analysis criteria: equity, efficiency, preference satisfaction, right to privacy, avoidance of stigma, and unintended consequences. Policy options include the following: 1) do nothing, 2) leave current policies intact while supporting a research program to document the health consequences of specific occupational risks to women's reproductive health, 3) restrict women for who pregnancy is not ruled out from occupations or work areas known or suspected to be hazardous, 4) improve working conditions for all women, and 5) improve working conditions for all workers. Policy analysis suggests the working conditions of all workers should be improved. This alternative reduces inequity, eliminates stigma, maintains privacy, and honors preferences. Implementation of this policy would be expensive, requiring an increase in knowledge of the effects of industrial substances on female and male reproductive health, expansion of the technical capacity to control occupational hazards, and an increase in the resources of programs that monitor and regulate occupational health. However, this approach is in accord with growing concern that workers should not have to compromise their health to keep their jobs.

Deep Borehole Emplacement Mode Hazard Analysis Revision 0

Energy Technology Data Exchange (ETDEWEB)

Sevougian, S. David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-08-07

This letter report outlines a methodology and provides resource information for the Deep Borehole Emplacement Mode Hazard Analysis (DBEMHA). The main purpose is identify the accident hazards and accident event sequences associated with the two emplacement mode options (wireline or drillstring), to outline a methodology for computing accident probabilities and frequencies, and to point to available databases on the nature and frequency of accidents typically associated with standard borehole drilling and nuclear handling operations. Risk mitigation and prevention measures, which have been incorporated into the two emplacement designs (see Cochran and Hardin 2015), are also discussed. A key intent of this report is to provide background information to brief subject matter experts involved in the Emplacement Mode Design Study. [Note: Revision 0 of this report is concentrated more on the wireline emplacement mode. It is expected that Revision 1 will contain further development of the preliminary fault and event trees for the drill string emplacement mode.

ENVIRONMENTAL HAZARDS AS A CAUSE OF PEDIATRIC INTENSIVE CARE ADMISSION

Directory of Open Access Journals (Sweden)

Nasser Ali Haidar

2014-12-01

Full Text Available Background: Children are exposed to several environmental hazards with variable effects from mild to severe manifestations leading to death. The aim of this study is to study the pattern of Pediatric Intensive Care Unit (PICU admission due to environmental hazards and its mortality rate. Methods: This is a hospital-based study conducted during a 5 years period in Al-Madinah Al-Munwarah, Saudi Arabia. Results: Out of total PICU admissions, 9% were due to environmental hazards. Bronchial asthma which is triggered mostly by environmental factors, was the most common (35.3% followed by: trauma (27%, poisoning (15.3% and submersion injuries (9.7%. Males were significantly more exposed to environmental hazard than females (χ2= 13, p = 0.021. Statistical analysis showed a significant difference in the frequency of environmental hazards between summer and winter (χ2= 12, p = 0.033. Trauma, poisoning, submersion injuries, stings and bites were more in summer compared to winter. However, bronchial asthma had higher frequency in winter. The Median length of PICU stay ranges from 1.6 – 12.5 days depending on the type of hazard. Overall mortality rate was 8.8% with the highest rate among trauma followed by submersion injury patients with no fatality in drug ingestion or food poisoning. Conclusion: Environmental hazards represent a preventable major health problem with significant mortality and burden in health economics by long PICU stay and its sequel.

78 FR 24691 - Current Good Manufacturing Practice and Hazard Analysis and Risk-Based Preventive Controls for...

Science.gov (United States)

2013-04-26

... comments should be identified with the title ``Current Good Manufacturing Practice and Hazard Analysis and..., 114, 117, 120, 123, 129, 179, and 211 [Docket No. FDA-2011-N-0920] RIN 0910-AG36 Current Good Manufacturing Practice and Hazard Analysis and Risk- Based Preventive Controls for Human Food; Extension of...

Sludge Treatment Project Engineered Container Retrieval And Transfer System Preliminary Design Hazard Analysis Supplement 1

International Nuclear Information System (INIS)

Franz, G.R.; Meichle, R.H.

2011-01-01

This 'What/If' Hazards Analysis addresses hazards affecting the Sludge Treatment Project Engineered Container Retrieval and Transfer System (ECRTS) NPH and external events at the preliminary design stage. In addition, the hazards of the operation sequence steps for the mechanical handling operations in preparation of Sludge Transport and Storage Container (STSC), disconnect STSC and prepare STSC and Sludge Transport System (STS) for shipping are addressed.

Fire Hazard Analysis for the Cold Vacuum Drying (CVD) Facility

Energy Technology Data Exchange (ETDEWEB)

JOHNSON, B.H.

1999-08-19

This Fire Hazard Analysis assesses the risk from fire within individual fire areas in the Cold Vacuum Drying Facility at the Hanford Site in relation to existing or proposed fire protection features to ascertain whether the objectives of DOE Order 5480.7A Fire Protection are met.

Fire Hazard Analysis for the Cold Vacuum Drying (CVD) Facility

International Nuclear Information System (INIS)

JOHNSON, B.H.

1999-01-01

This Fire Hazard Analysis assesses the risk from fire within individual fire areas in the Cold Vacuum Drying Facility at the Hanford Site in relation to existing or proposed fire protection features to ascertain whether the objectives of DOE Order 5480.7A Fire Protection are met

An alternative approach to probabilistic seismic hazard analysis in the Aegean region using Monte Carlo simulation

Science.gov (United States)

Weatherill, Graeme; Burton, Paul W.

2010-09-01

The Aegean is the most seismically active and tectonically complex region in Europe. Damaging earthquakes have occurred here throughout recorded history, often resulting in considerable loss of life. The Monte Carlo method of probabilistic seismic hazard analysis (PSHA) is used to determine the level of ground motion likely to be exceeded in a given time period. Multiple random simulations of seismicity are generated to calculate, directly, the ground motion for a given site. Within the seismic hazard analysis we explore the impact of different seismic source models, incorporating both uniform zones and distributed seismicity. A new, simplified, seismic source model, derived from seismotectonic interpretation, is presented for the Aegean region. This is combined into the epistemic uncertainty analysis alongside existing source models for the region, and models derived by a K-means cluster analysis approach. Seismic source models derived using the K-means approach offer a degree of objectivity and reproducibility into the otherwise subjective approach of delineating seismic sources using expert judgment. Similar review and analysis is undertaken for the selection of peak ground acceleration (PGA) attenuation models, incorporating into the epistemic analysis Greek-specific models, European models and a Next Generation Attenuation model. Hazard maps for PGA on a "rock" site with a 10% probability of being exceeded in 50 years are produced and different source and attenuation models are compared. These indicate that Greek-specific attenuation models, with their smaller aleatory variability terms, produce lower PGA hazard, whilst recent European models and Next Generation Attenuation (NGA) model produce similar results. The Monte Carlo method is extended further to assimilate epistemic uncertainty into the hazard calculation, thus integrating across several appropriate source and PGA attenuation models. Site condition and fault-type are also integrated into the hazard

Risk assessment for the transportation of hazardous waste and hazardous waste components of low-level mixed waste and transuranic waste for the U.S. Department of Energy waste management programmatic environmental impact statement

International Nuclear Information System (INIS)

Lazaro, M.A.; Policastro, A.J.; Hartmann, H.M.

1995-04-01

This report, a supplement to Appendix E (Transportation Risk) of the U.S. Department of Energy Waste Management Programmatic Environmental Impact Statement (WM PEIS), provides additional information supporting the accident data for chemical risk assessment and health risk methodology described in that appendix (Part II), as well as providing the uncertainty analysis and on-site risk calculations. This report focuses on hazardous material truck accident rates, release probabilities, and release quantities; provides the toxicological values derived for each hazardous chemical assessed in the WM PEIS and further details on the derivation of health criteria; describes the method used in the transportation risk assessments to address potential additivity of health effects from simultaneous exposure to several chemicals and the method used to address transportation risks for maximally exposed individuals; presents an expanded discussion of the uncertainty associated with transportation risk calculations; and includes the results of the on-site transportation risk analysis. In addition, two addenda are provided to detail the risk assessments conducted for the hazardous components of low-level mixed waste (Addendum I) and transuranic waste (Addendum II)

Potential and Actual Health Hazards in the Dense Urban Operational Environment: Critical Gaps and Solutions for Military Occupational Health.

Science.gov (United States)

Patterson, Steven L; Dancy, Blair C R; Ippolito, Danielle L; Stallings, Jonathan D

2017-11-01

: This paper presents environmental health risks which are prevalent in dense urban environments.We review the current literature and recommendations proposed by environmental medicine experts in a 2-day symposium sponsored by the Department of Defense and supported by the Johns Hopkins University Applied Physics Laboratory.Key hazards in the dense urban operational environment include toxic industrial chemicals and materials, water pollution and sewage, and air pollution. Four critical gaps in environmental medicine were identified: prioritizing chemical and environmental concerns, developing mobile decision aids, personalized health assessments, and better real-time health biomonitoring.As populations continue to concentrate in cities, civilian and military leaders will need to meet emerging environmental health concerns by developing and delivering adequate technology and policy solutions.

Risk analysis of environmental hazards at the High Flux Beam Reactor

International Nuclear Information System (INIS)

Boccio, J.L.; Ho, V.S.; Johnson, D.H.

1994-01-01

In the late 1980s, a Level 1 internal event probabilistic risk assessment (PRA) was performed for the High-Flux Beam Reactor (HFBR), a US Department of Energy research reactor located at Brookhaven National Laboratory. Prior to the completion of that study, a level 1 PRA for external events was initiated, including environmental hazards such as fire, internal flooding, etc. Although this paper provides a brief summary of the risks from environmental hazards, emphasis will be placed on the methodology employed in utilizing industrial event databases for event frequency determination for the HFBR complex. Since the equipment in the HFBR is different from that of, say, a commercial nuclear power plant, the current approach is to categorize the industrial events according to the hazard initiators instead of categorizing by initiator location. But first a general overview of the analysis

42 CFR 84.52 - Respiratory hazards; classification.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Respiratory hazards; classification. 84.52 Section... SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Classification of Approved Respirators; Scope of Approval; Atmospheric Hazards; Service Time § 84.52 Respiratory...

[Synthetic cannabinoids: spread, addiction biology & current perspective of personal health hazard].

Science.gov (United States)

Bonnet, U; Mahler, H

2015-04-01

Among the new psychoactive substances (NPS), most frequently synthetic cannabinoids (SCBs) have been found in Europe. These are sold as active compounds in e. g. so-called "herbal blends". When inhaled or ingested, besides intoxication symptoms, as they occur with heavy cannabis use (e. g., tachycardia, myocardial infarction, confusion, hallucinations, panic attacks, and paranoia), harmful effects (severe agitation, coma, catatonic stupor, hypertension, cardiac arrhythmia, dyspnoea, seizures, myoclonus, rhabdomyolysis, hyperthermia, diaphoresis, acute kidney injury, vomiting, headache, and hypokalemia) arise, which are mostly unusual about cannabis use. In addition, the first cases of addiction and death related to SCBs have been reported. Taking into account the newest literature and using an algorithm with two main criteria (addiction potential, toxicity), the authors made a first attempt to rank the personal health hazard of SCBs in comparison to that of other psychoactive drugs. Accordingly, the relative health hazard of SCBs is found to be somewhat higher than that of cannabis and lower than that of synthetic cathinones ("bath salts"). However, the toxicity of SCBs, is significantly greater than the toxicity of cannabis, thus being similar to that of synthetic cathinones and benzodiazepines. The addiction potential appears to be lower than that of synthetic cathinones, benzodiazepines, or cannabis. Due to the fluctuation of substances and the availability in internet resources, legislation is facing a serious "hare-hedgehog" problem to control the manufacture, trade and possession of SCBs. © Georg Thieme Verlag KG Stuttgart · New York.

The probabilistic risk analysis of external hazards of an interim storage for spent nuclear fuel in Olkiluoto

International Nuclear Information System (INIS)

Puukka, Tiia

2014-01-01

Due to natural disasters occurred in the world and the experiences perceived of the Fukushima nuclear accident, the particular knowledge of the role and influence of external hazards in the safety of interim storage of spent nuclear fuel has been emphasized. For that reason it is substantial that they are included in the probabilistic risk assessment (PRA) of the interim storage facility. This is also required by the Regulatory Guides issued by The Finnish Radiation and Nuclear Safety Authority STUK. To enhance safety culture and nuclear safety in Olkiluoto, The Finnish utility Teollisuuden Voima Oyj has recently completed an analysis of external natural (seismic events are studied as a separate analysis) and unintentional human-induced risks associated with the spent fuel pool cooling and decay heat removal systems as part of the full-scope PRA study for the interim storage of spent fuel (KPA store). The analysis had four goals to achieve: (1) to determine the definition of an initiating event in the context of the KPA store, (2) to identify all potential external hazards and hazard combinations, (3) to perform a qualitative screening analysis based on frequency-strength analysis and detailed plant responses analysis and (4) to model the hazards passed the screening analysis so that model can be used as a risk analysis tool in the risk informed decision making and operating procedures. The assessment carried out included the analysis of operation procedures of decay heat removal, the study of external hazards related initiating events included in the PRA of the OL1 and OL2 nuclear power plants and their dependencies on the initiating events of the KPA store. All external hazards related initiating events were modeled using fault tree linking method. The main result and conclusion of this study was that using the screening analysis, initiating events caused by external hazards that could lead to leakage of the spent fuel pools or that could pose a threat to the

Probabilistic and Scenario Seismic and Liquefaction Hazard Analysis of the Mississippi Embayment Incorporating Nonlinear Site Effects

Science.gov (United States)

Cramer, C. H.; Dhar, M. S.

2017-12-01

The influence of deep sediment deposits of the Mississippi Embayment (ME) on the propagation of seismic waves is poorly understood and remains a major source of uncertainty for site response analysis. Many researchers have studied the effects of these deposits on seismic hazard of the area using available information at the time. In this study, we have used updated and newly available resources for seismic and liquefaction hazard analyses of the ME. We have developed an improved 3D geological model. Additionally, we used surface geological maps from Cupples and Van Arsdale (2013) to prepare liquefaction hazard maps. Both equivalent linear and nonlinear site response codes were used to develop site amplification distributions for use in generating hazard maps. The site amplification distributions are created using the Monte Carlo approach of Cramer et al. (2004, 2006) on a 0.1-degree grid. The 2014 National Seismic Hazard model and attenuation relations (Petersen et al., 2014) are used to prepare seismic hazard maps. Then liquefaction hazard maps are generated using liquefaction probability curves from Holzer (2011) and Cramer et al. (2015). Equivalent linear response (w/ increased precision, restricted nonlinear behavior with depth) shows similar hazard for the ME compared to nonlinear analysis (w/o pore pressure) results. At short periods nonlinear deamplification dominates the hazard, but at long periods resonance amplification dominates. The liquefaction hazard tends to be high in Holocene and late Pleistocene lowland sediments, even with lowered ground water levels, and low in Pleistocene loess of the uplands. Considering pore pressure effects in nonlinear site response analysis at a test site on the lowlands shows amplification of ground motion at short periods. PGA estimates from ME liquefaction and MMI observations are in the 0.25 to 0.4 g range. Our estimated M7.5 PGA hazard within 10 km of the fault can exceed this. Ground motion observations from

EFSA BIOHAZ Panel (EFSA Panel on Biological Hazards, 2013. Scientific Opinion on the public health hazards to be covered by inspection of meat from sheep and goats

DEFF Research Database (Denmark)

Hald, Tine; Baggesen, Dorte Lau

A risk ranking process identified Toxoplasma gondii and pathogenic verocytotoxin-producing Escherichia coli (VTEC) as the most relevant biological hazards for meat inspection of sheep and goats. As these are not detected by traditional meat inspection, a meat safety assurance system using risk......-based interventions was proposed. Further studies are required on T. gondii and pathogenic VTEC. If new information confirms these hazards as a high risk to public health from meat from sheep or goats, setting targets at carcass level should be considered. Other elements of the system are risk...... the extensive production systems used, and the ranking of chemical substances, which should be regularly updated and include new hazards. Control programmes across the food chain, national residue control plans, feed control and monitoring of environmental contaminants should be better integrated. Meat...

A LiDAR based analysis of hydraulic hazard mapping

Science.gov (United States)

Cazorzi, F.; De Luca, A.; Checchinato, A.; Segna, F.; Dalla Fontana, G.

2012-04-01

Mapping hydraulic hazard is a ticklish procedure as it involves technical and socio-economic aspects. On the one hand no dangerous areas should be excluded, on the other hand it is important not to exceed, beyond the necessary, with the surface assigned to some use limitations. The availability of a high resolution topographic survey allows nowadays to face this task with innovative procedures, both in the planning (mapping) and in the map validation phases. The latter is the object of the present work. It should be stressed that the described procedure is proposed purely as a preliminary analysis based on topography only, and therefore does not intend in any way to replace more sophisticated analysis methods requiring based on hydraulic modelling. The reference elevation model is a combination of the digital terrain model and the digital building model (DTM+DBM). The option of using the standard surface model (DSM) is not viable, as the DSM represents the vegetation canopy as a solid volume. This has the consequence of unrealistically considering the vegetation as a geometric obstacle to water flow. In some cases the topographic model construction requires the identification and digitization of the principal breaklines, such as river banks, ditches and similar natural or artificial structures. The geometrical and topological procedure for the validation of the hydraulic hazard maps is made of two steps. In the first step the whole area is subdivided into fluvial segments, with length chosen as a reasonable trade-off between the need to keep the hydrographical unit as complete as possible, and the need to separate sections of the river bed with significantly different morphology. Each of these segments is made of a single elongated polygon, whose shape can be quite complex, especially for meandering river sections, where the flow direction (i.e. the potential energy gradient associated to the talweg) is often inverted. In the second step the segments are analysed

Flood hazards for nuclear power plants

International Nuclear Information System (INIS)

Yen, B.C.

1988-01-01

Flooding hazards for nuclear power plants may be caused by various external geophysical events. In this paper the hydrologic hazards from flash floods, river floods and heavy rain at the plant site are considered. Depending on the mode of analysis, two types of hazard evaluation are identified: 1) design hazard which is the probability of flooding over an expected service period, and 2) operational hazard which deals with real-time forecasting of the probability of flooding of an incoming event. Hazard evaluation techniques using flood frequency analysis can only be used for type 1) design hazard. Evaluation techniques using rainfall-runoff simulation or multi-station correlation can be used for both types of hazard prediction. (orig.)

The palm wine trade: occupational and health hazards.

Science.gov (United States)

Mbuagbaw, L; Noorduyn, S G

2012-10-01

The palm wine trade is an important economic activity for many tropical rural areas worldwide. In West Africa, palm wine holds high sociocultural and traditional values. Wine tappers often climb very tall trees with rudimentary equipment to harvest palm sap and risk severe injuries in the event of a fall. Furthermore, the wine quickly ferments beyond the desired taste and alcohol content, reducing the market power of these tappers. Therefore, to maximize benefits or to enhance shelf life, a variety of components are added to the palm tree sap, introducing the possibility of deadly contaminants. This paper highlights the public health implications of uncontrolled palm wine production and the relative neglect of the wine tapper. We draw from the limited published literature and use Cameroon as a case study. The palm wine trade can be more productive and safe if tappers work in cooperatives to improve their market power. Public health authorities need to monitor the quality of this cheap and common source of alcohol and enact regulations to protect wine tappers from the current level of occupational hazards. There are varying levels of progress to control quality and ensure safety in different parts of the world. Legislation and collaboration with traditional structures may offer a framework for change.

EDCs Mixtures: A Stealthy Hazard for Human Health?

Directory of Open Access Journals (Sweden)

Edna Ribeiro

2017-02-01

Full Text Available Endocrine disrupting chemicals (EDCs are exogenous chemicals that may occur naturally (e.g., phytoestrogens, while others are industrial substances and plasticizers commonly utilized worldwide to which human exposure, particularly at low-doses, is omnipresent, persistent and occurs in complex mixtures. EDCs can interfere with/or mimic estrogenic hormones and, consequently, can simultaneously trigger diverse signaling pathways which result in diverse and divergent biological responses. Additionally, EDCs can also bioaccumulate in lipid compartments of the organism forming a mixed “body burden” of contaminants. Although the independent action of chemicals has been considered the main principle in EDCs mixture toxicity, recent studies have demonstrated that numerous effects cannot be predicted when analyzing single compounds independently. Co-exposure to these agents, particularly in critical windows of exposure, may induce hazardous health effects potentially associated with a complex “body burden” of different origins. Here, we performed an exhaustive review of the available literature regarding EDCs mixtures exposure, toxicity mechanisms and effects, particularly at the most vulnerable human life stages. Although the assessment of potential risks to human health due to exposure to EDCs mixtures is a major topic for consumer safety, information regarding effective mixtures effects is still scarce.

The Palm Wine Trade: Occupational and Health Hazards

Directory of Open Access Journals (Sweden)

L Mbuagbaw

2012-08-01

Full Text Available The palm wine trade is an important economic activity for many tropical rural areas worldwide. In West Africa, palm wine holds high sociocultural and traditional values. Wine tappers often climb very tall trees with rudimentary equipment to harvest palm sap and risk severe injuries in the event of a fall. Furthermore, the wine quickly ferments beyond the desired taste and alcohol content, reducing the market power of these tappers. Therefore, to maximize benefits or to enhance shelf life, a variety of components are added to the palm tree sap, introducing the possibility of deadly contaminants. This paper highlights the public health implications of uncontrolled palm wine production and the relative neglect of the wine tapper. We draw from the limited published literature and use Cameroon as a case study. The palm wine trade can be more productive and safe if tappers work in cooperatives to improve their market power. Public health authorities need to monitor the quality of this cheap and common source of alcohol and enact regulations to protect wine tappers from the current level of occupational hazards. There are varying levels of progress to control quality and ensure safety in different parts of the world. Legislation and collaboration with traditional structures may offer a framework for change.

Effectuality of Cleaning Workers' Training and Cleaning Enterprises' Chemical Health Hazard Risk Profiling

Directory of Open Access Journals (Sweden)

Abdulqadir M. Suleiman

2015-12-01

Conclusion: Training of cleaning workers lacks the prerequisite for suitability and effectiveness to counter risks of chemical health hazards. There is dereliction of duty by management in the sector resulting in a lack of competence among the cleaning workers. Instituting acceptable easily attainable safety competence level for cleaners will conduce to risk reduction, and enforcement of attainment of the competence level would be a positive step.

Hazardous Chemicals

Centers for Disease Control (CDC) Podcasts

2007-04-10

Chemicals are a part of our daily lives, providing many products and modern conveniences. With more than three decades of experience, The Centers for Disease Control and Prevention (CDC) has been in the forefront of efforts to protect and assess people's exposure to environmental and hazardous chemicals. This report provides information about hazardous chemicals and useful tips on how to protect you and your family from harmful exposure.  Created: 4/10/2007 by CDC National Center for Environmental Health.   Date Released: 4/13/2007.

Modeling of seismic hazards for dynamic reliability analysis

International Nuclear Information System (INIS)

Mizutani, M.; Fukushima, S.; Akao, Y.; Katukura, H.

1993-01-01

This paper investigates the appropriate indices of seismic hazard curves (SHCs) for seismic reliability analysis. In the most seismic reliability analyses of structures, the seismic hazards are defined in the form of the SHCs of peak ground accelerations (PGAs). Usually PGAs play a significant role in characterizing ground motions. However, PGA is not always a suitable index of seismic motions. When random vibration theory developed in the frequency domain is employed to obtain statistics of responses, it is more convenient for the implementation of dynamic reliability analysis (DRA) to utilize an index which can be determined in the frequency domain. In this paper, we summarize relationships among the indices which characterize ground motions. The relationships between the indices and the magnitude M are arranged as well. In this consideration, duration time plays an important role in relating two distinct class, i.e. energy class and power class. Fourier and energy spectra are involved in the energy class, and power and response spectra and PGAs are involved in the power class. These relationships are also investigated by using ground motion records. Through these investigations, we have shown the efficiency of employing the total energy as an index of SHCs, which can be determined in the time and frequency domains and has less variance than the other indices. In addition, we have proposed the procedure of DRA based on total energy. (author)

Moral Hazard, Adverse Selection and the Optimal Consumption-Leisure Choice under Equilibrium Price Dispersion

Directory of Open Access Journals (Sweden)

Sergey Malakhov

2017-09-01

Full Text Available The analysis of the optimal consumption-leisure choice under equilibrium price dispersion discovers the methodological difference between problems of moral hazard and adverse selection. While the phenomenon of moral hazard represents the individual behavioral reaction on the marginal rate of substitution of leisure for consumption proposed by the insurance policy, the adverse selection can take place on any imperfect market under equilibrium price dispersion and it looks like a market phenomenon of a natural selection between consumers with different income and different propensity to search. The analysis of health insurance where the propensity to search takes the form of the propensity to seek healthcare demonstrates that moral hazard takes place when the insurance policy proposes a suboptimal consumption-leisure choice and the increase in consumption of medical services with the reduction of leisure time represents not an unlimited demand for “free goods” but the simple process of the consumption-leisure optimization. The path of consumerism with consumer-directed plans can solve partly the problem of moral hazard because in order to eliminate moral hazard this trend should come to the re-sale of medical services under health vouchers like it takes place in the life settlement.

Fire Hazards Analysis for the Inactive Equipment Storage Sprung Structure

International Nuclear Information System (INIS)

MYOTT, C.F.

2000-01-01

The purpose of the analysis is to comprehensively assess the risk from fire within individual fire areas in relation to proposed fire protection so as to ascertain whether the fire protection objective of DOE Order 5480.1A are met. The order acknowledges a graded approach commensurate with the hazards involved

WE-G-BRA-06: Application of Systems and Control Theory-Based Hazard Analysis to Radiotherapy

Energy Technology Data Exchange (ETDEWEB)

Pawlicki, T [UC San Diego, La Jolla, CA (United States); Samost, A; Leveson, N [Massachusetts Institute of Technology, Cambridge, MA (United States)

2015-06-15

Purpose: The process of delivering radiation occurs in a complex socio-technical system heavily reliant on human operators. Furthermore, both humans and software are notoriously challenging to account for in traditional hazard analysis models. High reliability industries such as aviation have approached this problem through using hazard analysis techniques grounded in systems and control theory. The purpose of this work is to apply the Systems Theoretic Accident Model Processes (STAMP) hazard model to radiotherapy. In particular, the System-Theoretic Process Analysis (STPA) approach is used to perform a hazard analysis of a proposed on-line adaptive cranial radiosurgery procedure that omits the CT Simulation step and uses only CBCT for planning, localization, and treatment. Methods: The STPA procedure first requires the definition of high-level accidents and hazards leading to those accidents. From there, hierarchical control structures were created followed by the identification and description of control actions for each control structure. Utilizing these control structures, unsafe states of each control action were created. Scenarios contributing to unsafe control action states were then identified and translated into system requirements to constrain process behavior within safe boundaries. Results: Ten control structures were created for this new CBCT-only process which covered the areas of hospital and department management, treatment design and delivery, and vendor service. Twenty three control actions were identified that contributed to over 80 unsafe states of those control actions resulting in over 220 failure scenarios. Conclusion: The interaction of people, hardware, and software are highlighted through the STPA approach. STPA provides a hierarchical model for understanding the role of management decisions in impacting system safety so that a process design requirement can be traced back to the hazard and accident that it is intended to mitigate. Varian

Use of fire hazard analysis to cost effectively manage facility modifications

Energy Technology Data Exchange (ETDEWEB)

Krueger, K., E-mail: kkruger@plcfire.com [PLC Fire Safety Solutions, Fredericton, NB (Canada); Cronk, R., E-mail: rcronk@plcfire.com [PLC Fire Safety Solutions, Mississauga, ON (Canada)

2014-07-01

In Canada, licenced Nuclear power facilities, or facilities that process, handle or store nuclear material are required by the Canadian Nuclear Safety Commission to have a change control process in place. These processes are in place to avoid facility modifications that could result in an increase in fire hazards, or degradation of fire protection systems. Change control processes can have a significant impact on budgets associated with plant modifications. A Fire Hazard Analysis (FHA) is also a regulatory requirement for licenced facilities in Canada. An FHA is an extensive evaluation of a facility's construction, nuclear safety systems, fire hazards, and fire protection features. This paper is being presented to outline how computer based data management software can help organize facilities' fire safety information, manage this information, and reduce the costs associated with preparation of FHAs as well as facilities' change control processes. (author)

Control of dust hazards in mines

Energy Technology Data Exchange (ETDEWEB)

Sukhanov, V V

1981-09-01

This paper analyzes health hazards associated with air pollution by respirable coal dust which causes pneumoconioses. The following directions in pneumoconioses prevention are discussed: improved protective systems (e.g. respirators), mining schemes optimized from a health hazards point of view, correct determination of the maximum permissible level of respirable dusts, reducing working time. Safety regulations in the USSR on the critical amount of coal dust in the miner respiratory system are insufficient as the 20 g limit is too high and does not guarantee safety. Using regression analysis influence of the factors which cause pneumoconioses is analyzed. This influence is described by an equation which considers the following factors: number of shifts associated with contact of a miner with coal dusts, dust concentration in mine air, amount of air with coal dust being respirated, miner's age, years as miner, coal rank. It is stated that use of the proposed equation (derived by computer calculations) permits the safe working time to be correctly determined considering all factors which cause pneumoconioses.

Hazard, sensorial and economic analysis critical control point (HACCP) check list for radiation sterilized ready-to-eat meals

Energy Technology Data Exchange (ETDEWEB)

Haruvy, Y F [Soreq Nuclear Research Centre, Operations Division, QA Department, Yavne (Israel)

2004-07-01

The primary objective of this work is to introduce a modified HACCP analysis route, for irradiated prepared meals that addresses not only health hazards but also sensorial failures, economic risks. Above all, this method aims at pinpointing failure modes specific to the radiation pasteurization aspect of the production and the product. The suggested modified analysis should serve all researchers in the CRP in their attempts to transfer their process and product from the laboratory-research type into an industrial one. While in the laboratory we can discard 'failure' samples or lots, or parts of a lot that are of inferior quality, an industrial process must be profitable and, hence, stable and reproducibly producing high quality products. The basic aspects of the HACCP route are: HACCP describes a system of control for assuring food safety and provides a more structured and critical approach to the control of identified hazards than that achievable by traditional inspection and quality control procedures; It has the potential to identify areas of concern where failure has not yet been experienced, making it particularly useful for new operations. The analysis route is exemplified in tables, that cover all the steps involved in the food production, from farm to fork.

Risk analysis of radioactive waste repository based on the time dependent hazard rate

International Nuclear Information System (INIS)

Chang, S.H.; Cho, W.J.

1984-01-01

For the probabilistic risk analysis of the radioactive high level waste repository, the simplified method based on the time dependent hazard rate is proposed. The obtained results are compared with those from the time independent hazard rate. The estimation of the failure probability of the waste repository through this method gives more conservative results, especially when the half-life of nuclide is larger and retardation factors of nuclide is smaller. (Auth.)

PENERAPAN SISTEM HAZARD ANALYSIS CRITICAL CONTROL POINT (HACCP PADA PROSES PEMBUATAN KERIPIK TEMPE

Directory of Open Access Journals (Sweden)

Rahmi Yuniarti

2015-06-01

Full Text Available Malang is one of the industrial centers of tempe chips. To maintain the quality and food safety, analysis is required to identify the hazards during the production process. This study was conducted to identify the hazards during the production process of tempe chips and provide recommendations for developing a HACCP system. The phases of production process of tempe chips are started from slice the tempe, move it to the kitchen, coat it with flour dough, fry it in the pan, drain it, package it, and then storage it. There are 3 types of potential hazards in terms of biological, physical, and chemical during the production process. With the CCP identification, there are three processes that have Critical Control Point. There are the process of slicing tempe, immersion of tempe into the flour mixture and draining. Recommendations for the development of HACCP systems include recommendations related to employee hygiene, supporting equipment, 5-S analysis, and the production layout.

Radioactive hazards

International Nuclear Information System (INIS)

Gill, J.R.

1980-01-01

The use of radioactive substances in hospital laboratories is discussed and the attendant hazards and necessary precautions examined. The new legislation under the Health and Safety at Work Act which, it is proposed, will replace existing legal requirements in the field of health and safety at work by a system of regulations and approved codes of practice designed to maintain or improve the standards of health, safety and welfare already established, is considered with particular reference to protection against ionising radiations. (UK)

Hazard sign comprehension among illiterate adults

African Journals Online (AJOL)

KATEVG

Hazard signs have been considered an effective mode of transferring safety .... United Kingdom and the United States of America, indicating that hazard ..... primary providers of these programmes (Occupational Health and Safety Act 1993).

EFSA BIOHAZ Panel (EFSA Panel on Biological Hazards), 2013. Scientific Opinion on the public health hazards to be covered by inspection of meat from farmed game

DEFF Research Database (Denmark)

Hald, Tine; Baggesen, Dorte Lau

ranked as medium or lower potential concern. More effective control of biological hazards could be achieved using an integrated farm to chilled carcass approach, including improved food chain information (FCI) and risk-based controls. Further studies are required on Salmonella spp. in farmed wild boar...... and T. gondii in farmed wild boar and farmed deer. If new information confirms a high risk to public health from meat from these species, setting targets at carcass level should be considered. Palpation and incision should be omitted, as it will not detect biological hazards considered to be a high......Salmonella spp. in farmed wild boar and Toxoplasma gondii in farmed deer and farmed wild boar were ranked as a high priority for meat inspection. Trichinella spp. in wild boar was ranked as low priority due to current controls, which should be continued. For chemical hazards, all substances were...

Site-specific seismic probabilistic tsunami hazard analysis: performances and potential applications

Science.gov (United States)

Tonini, Roberto; Volpe, Manuela; Lorito, Stefano; Selva, Jacopo; Orefice, Simone; Graziani, Laura; Brizuela, Beatriz; Smedile, Alessandra; Romano, Fabrizio; De Martini, Paolo Marco; Maramai, Alessandra; Piatanesi, Alessio; Pantosti, Daniela

2017-04-01

Seismic Probabilistic Tsunami Hazard Analysis (SPTHA) provides probabilities to exceed different thresholds of tsunami hazard intensity, at a specific site or region and in a given time span, for tsunamis caused by seismic sources. Results obtained by SPTHA (i.e., probabilistic hazard curves and inundation maps) represent a very important input to risk analyses and land use planning. However, the large variability of source parameters implies the definition of a huge number of potential tsunami scenarios, whose omission could lead to a biased analysis. Moreover, tsunami propagation from source to target requires the use of very expensive numerical simulations. At regional scale, the computational cost can be reduced using assumptions on the tsunami modeling (i.e., neglecting non-linear effects, using coarse topo-bathymetric meshes, empirically extrapolating maximum wave heights on the coast). On the other hand, moving to local scale, a much higher resolution is required and such assumptions drop out, since detailed inundation maps require significantly greater computational resources. In this work we apply a multi-step method to perform a site-specific SPTHA which can be summarized in the following steps: i) to perform a regional hazard assessment to account for both the aleatory and epistemic uncertainties of the seismic source, by combining the use of an event tree and an ensemble modeling technique; ii) to apply a filtering procedure which use a cluster analysis to define a significantly reduced number of representative scenarios contributing to the hazard of a specific target site; iii) to perform high resolution numerical simulations only for these representative scenarios and for a subset of near field sources placed in very shallow waters and/or whose coseismic displacements induce ground uplift or subsidence at the target. The method is applied to three target areas in the Mediterranean located around the cities of Milazzo (Italy), Thessaloniki (Greece) and

The costs of hazardous alcohol consumption in Germany.

Science.gov (United States)

Effertz, Tobias; Verheyen, Frank; Linder, Roland

2017-07-01

Hazardous alcohol consumption in Germany is a main threat to health. By using insurance claim data from the German Statutory Health Insurance and a classification strategy based on ICD10 diagnoses-codes we analyzed a sample of 146,000 subjects with more than 19,000 hazardous alcohol consumers. Employing different regression models with a control function approach, we calculate life years lost due to alcohol consumption, annual direct and indirect health costs, and the burden of pain and suffering measured by the Charlson-Index and assessed pain diagnoses. Additionally, we simulate the net accumulated premium payments over expenses in the German Statutory Health Insurance and the Statutory Pension Fund for hazardous alcohol consumers from a lifecycle perspective. In total, €39.3 billion each year result from hazardous alcohol consumption with an average loss of 7 years in life expectancy. Hazardous alcohol consumers clearly do not "pay their way" in the two main German social security systems and also display a higher intangible burden according to our definitions of pain and suffering.

Seafood safety: economics of hazard analysis and Critical Control Point (HACCP) programmes

National Research Council Canada - National Science Library

Cato, James C

1998-01-01

.... This document on economic issues associated with seafood safety was prepared to complement the work of the Service in seafood technology, plant sanitation and Hazard Analysis Critical Control Point (HACCP) implementation...

Taxonomic analysis of perceived risk: modeling individual and group perceptions within homogeneous hazard domains

International Nuclear Information System (INIS)

Kraus, N.N.; Slovic, P.

1988-01-01

Previous studies of risk perception have typically focused on the mean judgments of a group of people regarding the riskiness (or safety) of a diverse set of hazardous activities, substances, and technologies. This paper reports the results of two studies that take a different path. Study 1 investigated whether models within a single technological domain were similar to previous models based on group means and diverse hazards. Study 2 created a group taxonomy of perceived risk for only one technological domain, railroads, and examined whether the structure of that taxonomy corresponded with taxonomies derived from prior studies of diverse hazards. Results from Study 1 indicated that the importance of various risk characteristics in determining perceived risk differed across individuals and across hazards, but not so much as to invalidate the results of earlier studies based on group means and diverse hazards. In Study 2, the detailed analysis of railroad hazards produced a structure that had both important similarities to, and dissimilarities from, the structure obtained in prior research with diverse hazard domains. The data also indicated that railroad hazards are really quite diverse, with some approaching nuclear reactors in their perceived seriousness. These results suggest that information about the diversity of perceptions within a single domain of hazards could provide valuable input to risk-management decisions

Age-Related Health Hazards in Old Patients with First-Time Referral to a Rheumatologist: A Descriptive Study

Directory of Open Access Journals (Sweden)

W. van Lankveld

2011-01-01

Full Text Available Objective. To study the prevalence of generic age-related health hazards in elderly patient referred to a rheumatologist. Methods. Patients aged 75 or older referred to a specialized gerontorheumatological outpatient service over a period of 2 years were studied prospectively to determine the prevalence of comorbidities, a history of falls, inactivity, cognitive dysfunction, loneliness, and depression in this patient group. Results. A group of 154 patients were included in the study. Comorbidities were observed in 88% of the patients. At least one fall was reported in the last year by 44% of the patients; 44% of the patients reported low levels of health-enhancing physical activity. Depressed mood and loneliness were elevated in 30% and 31% of the patients, respectively. Mild or moderate cognitive impairment was observed in 13% of the patients. Conclusion. Patients in this study were characterized by poor physical ability, high levels of pain, and high prevalence of age-related health hazards.

Insured without moral hazard in the health care reform of China.

Science.gov (United States)

Wong, Chack-Kie; Cheung, Chau-Kiu; Tang, Kwong-Leung

2012-01-01

Public insurance possibly increases the use of health care because of the insured person's interest in maximizing benefits without incurring out-of-pocket costs. A newly reformed public insurance scheme in China that builds on personal responsibility is thus likely to provide insurance without causing moral hazard. This possibility is the focus of this study, which surveyed 303 employees in a large city in China. The results show that the coverage and use of the public insurance scheme did not show a significant positive effect on the average employee's frequency of physician consultation. In contrast, the employee who endorsed public responsibility for health care visited physicians more frequently in response to some insurance factors. On balance, public insurance did not tempt the average employee to consult physicians frequently, presumably due to personal responsibility requirements in the insurance scheme.

[Hazard evaluation modeling of particulate matters emitted by coal-fired boilers and case analysis].

Science.gov (United States)

Shi, Yan-Ting; Du, Qian; Gao, Jian-Min; Bian, Xin; Wang, Zhi-Pu; Dong, He-Ming; Han, Qiang; Cao, Yang

2014-02-01

In order to evaluate the hazard of PM2.5 emitted by various boilers, in this paper, segmentation of particulate matters with sizes of below 2. 5 microm was performed based on their formation mechanisms and hazard level to human beings and environment. Meanwhile, taking into account the mass concentration, number concentration, enrichment factor of Hg, and content of Hg element in different coal ashes, a comprehensive model aimed at evaluating hazard of PM2.5 emitted by coal-fired boilers was established in this paper. Finally, through utilizing filed experimental data of previous literatures, a case analysis of the evaluation model was conducted, and the concept of hazard reduction coefficient was proposed, which can be used to evaluate the performance of dust removers.

The impact measure of solid waste management on health: the hazard index

Directory of Open Access Journals (Sweden)

Loredana Musmeci

2010-01-01

Full Text Available The risk associated with waste exposure depends on the level of emissions arising from waste disposal and from the effects of these emissions on human health (dose-reponse. In 2007 an epidemiological study was conducted in two Italian provinces of the Campania Region, namely Naples and Caserta, with the aim of assessing the health effects deriving from exposure to waste. In these studies, the important aspect is the population exposure assessment, in relation to the different types of waste disposal. The Regional Agency for Environmental Protection (ARPA Campania has identified and characterized the various authorized/unauthorized dumping sites in the provinces of Naples and Caserta. Most of the waste disposals used are illegal and invisible (sunken or buried; thus, the toxic substances therein contained are unknown and difficult to identify. In order to locate the possible areas exposed to a higher waste-related health risk, a synthetical "hazard index" (at the municipality level was designed. By means of GIS, the number of waste impact areas was identified for each of the 196 municipalities in the two provinces; then, Census data (ISTAT 2001 was used to estimate the proportion of the population living in the impact areas. The synthetical hazard index at municipality level accounts for three elements: a the intrinsic characterization of the waste disposal, determining the way in which the pollutant is released; b the impact area of the dumping site (within 1 km radius, same areas are influenced by more than one site; c the density of the population living in the "impact area" surrounding the waste disposal site.

Sustainable System for Residual Hazards Management

International Nuclear Information System (INIS)

Kevin M. Kostelnik; James H. Clarke; Jerry L. Harbour

2004-01-01

Hazardous, radioactive and other toxic substances have routinely been generated and subsequently disposed of in the shallow subsurface throughout the world. Many of today's waste management techniques do not eliminate the problem, but rather only concentrate or contain the hazardous contaminants. Residual hazards result from the presence of hazardous and/or contaminated material that remains on-site following active operations or the completion of remedial actions. Residual hazards pose continued risk to humans and the environment and represent a significant and chronic problem that require continuous long-term management (i.e. >1000 years). To protect human health and safeguard the natural environment, a sustainable system is required for the proper management of residual hazards. A sustainable system for the management of residual hazards will require the integration of engineered, institutional and land-use controls to isolate residual contaminants and thus minimize the associated hazards. Engineered controls are physical modifications to the natural setting and ecosystem, including the site, facility, and/or the residual materials themselves, in order to reduce or eliminate the potential for exposure to contaminants of concern (COCs). Institutional controls are processes, instruments, and mechanisms designed to influence human behavior and activity. System failure can involve hazardous material escaping from the confinement because of system degradation (i.e., chronic or acute degradation) or by external intrusion of the biosphere into the contaminated material because of the loss of institutional control. An ongoing analysis of contemporary and historic sites suggests that the significance of the loss of institutional controls is a critical pathway because decisions made during the operations/remedial action phase, as well as decisions made throughout the residual hazards management period, are key to the long-term success of the prescribed system. In fact

Basic topical problems on health hazards from ionizing radiation

International Nuclear Information System (INIS)

Jacobi, W.; Paretzke, H.G.; Merkle, W.; Lechle, M.; Matthies, M.; Messerer, P.; Schindel, F.; Wirth, E.; Eisfeld, K.

In the framework of this research contract, a number of important questions have been considered which have been of basic interest in radiological protection against low doses of ionizing radiation. In particular, research concentrated on the various statistical concepts for the evaluation of epidemiological data for the purpose of radiation risk analysis, derivation of dose-time-effect-relationships for certain somatic effects, time dependence of selected dose-conversion factors, radiation hazards of carbon-14, tritium, and of radon daughter products. The essential results have been reported in separate publications, and therefore will only be shortly summarized here. (orig./HP) [de

Integrating human factors into process hazard analysis

International Nuclear Information System (INIS)

Kariuki, S.G.; Loewe, K.

2007-01-01

A comprehensive process hazard analysis (PHA) needs to address human factors. This paper describes an approach that systematically identifies human error in process design and the human factors that influence its production and propagation. It is deductive in nature and therefore considers human error as a top event. The combinations of different factors that may lead to this top event are analysed. It is qualitative in nature and is used in combination with other PHA methods. The method has an advantage because it does not look at the operator error as the sole contributor to the human failure within a system but a combination of all underlying factors

External hazards analysis approach to level 1 PSA of Mochovce NPP - Slovakia

International Nuclear Information System (INIS)

Stojka, Tibor

2000-01-01

Analyses of external events had been first time performed at the design stage of the Mochovce NPP showing sufficiently low contribution of external hazards to core damage frequency. But, based on IAEA document 'Safety problems of WWER-440/213 NPPs and the categorization' (IAEA-EBP-WWER-03, 1996), the need of new reassessment arose due to discrepancy of some origin recommendations in compare with present IAEA ones. Mochovce NPP Nuclear Safety Improvements Program elaborated at the same time included the IAEA recommendations and following improvements were proposed to perform in context of external events. 1. Seismic project and new locality seismic evaluation This safety improvement includes also some 'on site' technical improvements in seismic stability of structures and equipment. 2. Unit specific analyses of extreme meteorologic conditions. This safety improvement focuses on impact of feasible extreme conditions on NPP systems caused by rain, snow and hail storms, frost, winds, low and high temperatures. 3. Analyses of external hazards caused by humans. In this safety improvement were specified: feasible sources of explosions; analyses of hydrogen, gas and propane-calor gas depots; air crash risk. The results of these implemented safety improvements were considered in the PSA study. The External hazards analysis is also part of Level 1 PSA Mochovce NPP performed by PSA Department of VUJE Trnava Inc., Engineering, Design and Research Organization, Slovakia. Some partial analyses are performed in cooperation with following companies DS and S - SAIC, USA and Geophysical Institute Academy of Science, Slovakia Relko, Slovakia. Basic documents are: NUREG/CR-2300 'PRA Procedures Guide - A Guide to the Performance of Probabilistic Risk Assessments for Nuclear Power Plants' and IAEA SS No. 50-P-7 'Treatment of External Hazards in PSA for NPPs. The external hazards analysis consists of following parts: 1. Geography and plant locality; 2. Nearby industry; 3. Extreme

Chemical analysis and potential health risks of hookah charcoal

Energy Technology Data Exchange (ETDEWEB)

Elsayed, Yehya, E-mail: yelsayed@aus.edu; Dalibalta, Sarah, E-mail: sdalibalta@aus.edu; Abu-Farha, Nedal

2016-11-01

Hookah (waterpipe) smoking is a very common practice that has spread globally. There is growing evidence on the hazardous consequences of smoking hookah, with studies indicating that its harmful effects are comparable to cigarette smoking if not worse. Charcoal is commonly used as a heating source for hookah smoke. Although charcoal briquettes are thought to be one of the major contributors to toxicity, their composition and impact on the smoke generated remains largely unidentified. This study aims to analyze the elemental composition of five different raw synthetic and natural charcoals by using Carbon-Hydrogen-Nitrogen (CHN) analysis, inductively coupled plasma (ICP), and scanning electron microscopy coupled with energy dispersive X-Ray spectrometry (SEM-EDS). Elemental analysis showed that the raw charcoals contain heavy metals such as zinc, iron, cadmium, vanadium, aluminum, lead, chromium, manganese and cobalt at concentrations similar, if not higher than, cigarettes. In addition, thermal desorption-gas chromatography–mass spectrometry (TD-GC–MS) was used to analyze the chemical composition of the smoke produced from burning the charcoal samples. The smoke emitted from charcoal was found to be the source of numerous compounds which could be hazardous to health. A total of seven carcinogens, 39 central nervous system depressants and 31 respiratory irritants were identified. - Highlights: • Hookah charcoals, mainly synthetic brands, contains trace/heavy metals in concentrations exceeding those in cigarettes. • The concentration of lead in synthetic charcoal briquettes may impose adverse effects on human health. • The amount of nitrogen in synthetic charcoal is comparable to that reported in cigarettes. • Chemical profiling of smoke emitted from hookah charcoal reveals many compounds associated with potential health risks.

Chemical analysis and potential health risks of hookah charcoal

International Nuclear Information System (INIS)

Elsayed, Yehya; Dalibalta, Sarah; Abu-Farha, Nedal

2016-01-01

Hookah (waterpipe) smoking is a very common practice that has spread globally. There is growing evidence on the hazardous consequences of smoking hookah, with studies indicating that its harmful effects are comparable to cigarette smoking if not worse. Charcoal is commonly used as a heating source for hookah smoke. Although charcoal briquettes are thought to be one of the major contributors to toxicity, their composition and impact on the smoke generated remains largely unidentified. This study aims to analyze the elemental composition of five different raw synthetic and natural charcoals by using Carbon-Hydrogen-Nitrogen (CHN) analysis, inductively coupled plasma (ICP), and scanning electron microscopy coupled with energy dispersive X-Ray spectrometry (SEM-EDS). Elemental analysis showed that the raw charcoals contain heavy metals such as zinc, iron, cadmium, vanadium, aluminum, lead, chromium, manganese and cobalt at concentrations similar, if not higher than, cigarettes. In addition, thermal desorption-gas chromatography–mass spectrometry (TD-GC–MS) was used to analyze the chemical composition of the smoke produced from burning the charcoal samples. The smoke emitted from charcoal was found to be the source of numerous compounds which could be hazardous to health. A total of seven carcinogens, 39 central nervous system depressants and 31 respiratory irritants were identified. - Highlights: • Hookah charcoals, mainly synthetic brands, contains trace/heavy metals in concentrations exceeding those in cigarettes. • The concentration of lead in synthetic charcoal briquettes may impose adverse effects on human health. • The amount of nitrogen in synthetic charcoal is comparable to that reported in cigarettes. • Chemical profiling of smoke emitted from hookah charcoal reveals many compounds associated with potential health risks.

SSHAC Level 1 Probabilistic Seismic Hazard Analysis for the Idaho National Laboratory

International Nuclear Information System (INIS)

Payne, Suzette; Coppersmith, Ryan; Coppersmith, Kevin; Rodriguez-Marek, Adrian; Falero, Valentina Montaldo; Youngs, Robert

2016-01-01

A Probabilistic Seismic Hazard Analysis (PSHA) was completed for the Materials and Fuels Complex (MFC), Naval Reactors Facility (NRF), and the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) (Figure 1-1). The PSHA followed the approaches and procedures appropriate for a Study Level 1 provided in the guidance advanced by the Senior Seismic Hazard Analysis Committee (SSHAC) in U.S. Nuclear Regulatory Commission (NRC) NUREG/CR-6372 and NUREG-2117 (NRC, 1997; 2012a). The SSHAC Level 1 PSHAs for MFC and ATR were conducted as part of the Seismic Risk Assessment (SRA) project (INL Project number 31287) to develop and apply a new-risk informed methodology, respectively. The SSHAC Level 1 PSHA was conducted for NRF to provide guidance on the potential use of a design margin above rock hazard levels. The SRA project is developing a new risk-informed methodology that will provide a systematic approach for evaluating the need for an update of an existing PSHA. The new methodology proposes criteria to be employed at specific analysis, decision, or comparison points in its evaluation process. The first four of seven criteria address changes in inputs and results of the PSHA and are given in U.S. Department of Energy (DOE) Standard, DOE-STD-1020-2012 (DOE, 2012a) and American National Standards Institute/American Nuclear Society (ANSI/ANS) 2.29 (ANS, 2008a). The last three criteria address evaluation of quantitative hazard and risk-focused information of an existing nuclear facility. The seven criteria and decision points are applied to Seismic Design Category (SDC) 3, 4, and 5, which are defined in American Society of Civil Engineers/Structural Engineers Institute (ASCE/SEI) 43-05 (ASCE, 2005). The application of the criteria and decision points could lead to an update or could determine that such update is not necessary.

SSHAC Level 1 Probabilistic Seismic Hazard Analysis for the Idaho National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Payne, Suzette [Idaho National Lab. (INL), Idaho Falls, ID (United States); Coppersmith, Ryan [Idaho National Lab. (INL), Idaho Falls, ID (United States); Coppersmith, Kevin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rodriguez-Marek, Adrian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Falero, Valentina Montaldo [Idaho National Lab. (INL), Idaho Falls, ID (United States); Youngs, Robert [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-09-01

A Probabilistic Seismic Hazard Analysis (PSHA) was completed for the Materials and Fuels Complex (MFC), Naval Reactors Facility (NRF), and the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) (Figure 1-1). The PSHA followed the approaches and procedures appropriate for a Study Level 1 provided in the guidance advanced by the Senior Seismic Hazard Analysis Committee (SSHAC) in U.S. Nuclear Regulatory Commission (NRC) NUREG/CR-6372 and NUREG-2117 (NRC, 1997; 2012a). The SSHAC Level 1 PSHAs for MFC and ATR were conducted as part of the Seismic Risk Assessment (SRA) project (INL Project number 31287) to develop and apply a new-risk informed methodology, respectively. The SSHAC Level 1 PSHA was conducted for NRF to provide guidance on the potential use of a design margin above rock hazard levels. The SRA project is developing a new risk-informed methodology that will provide a systematic approach for evaluating the need for an update of an existing PSHA. The new methodology proposes criteria to be employed at specific analysis, decision, or comparison points in its evaluation process. The first four of seven criteria address changes in inputs and results of the PSHA and are given in U.S. Department of Energy (DOE) Standard, DOE-STD-1020-2012 (DOE, 2012a) and American National Standards Institute/American Nuclear Society (ANSI/ANS) 2.29 (ANS, 2008a). The last three criteria address evaluation of quantitative hazard and risk-focused information of an existing nuclear facility. The seven criteria and decision points are applied to Seismic Design Category (SDC) 3, 4, and 5, which are defined in American Society of Civil Engineers/Structural Engineers Institute (ASCE/SEI) 43-05 (ASCE, 2005). The application of the criteria and decision points could lead to an update or could determine that such update is not necessary.