WorldWideScience

Sample records for head-brain conductivity profiles

  1. Potential profile in a conducting polymer strip

    DEFF Research Database (Denmark)

    Bay, Lasse; West, Keld; Vlachopoulos, Nikolaos

    2002-01-01

    and complicate measurements on free-standing films. A model of the potential profile in a free-standing strip is derived. It is found that the active length (the length with a given potential change) of the polymer will scale as square root (d sigma /i/sub d/). (d is the thickness, sigma the conductivity...... of the film, and i/sub d/ the diffusion limited current density for oxygen reduction). The active length is typically of the order of millimeters. The model is compared with measurements on a strip of polypyrrole doped with dodecylbenzene sulfonate...

  2. Mantle electrical conductivity profile of Niger delta region

    Indian Academy of Sciences (India)

    Daniel N Obiora; Francisca N Okeke; K Yumoto; Stan O Agha

    2014-06-01

    The mantle electrical conductivity-depth profile of the Niger delta region in Nigeria has been determined using solar quiet day ionospheric current (Sq).The magnetometer data obtained in 2010 from geomagnetic stations installed in Lagos by magnetic dataset (MAGDAS) in 2008 and data from magnetometers installed in some parts of Niger delta by Center for Basic Space Science, University of Nigeria, Nsukka, were employed in this study. Gauss spherical harmonic analysis (SHA) method was used to separate the internal and external field contributions to Sq current system. The result depicted that the conductivity profile rose steadily from about 0.032 S/m at a depth of 89 km to 0.041 S/m at 100 km and 0.09 S/m at 221 km. This high conductivity region agreed with the global seismic low velocity region, the asthenosphere. The conductivity profile continued increasing downward until it got to 0.157 S/m at a depth of about 373 km (close to the base of upper mantle), 0.201 S/m at 784 km and reached 0.243 S/m at a depth of 1179 km at the lower mantle.

  3. The deep lunar electrical conductivity profile - Structural and thermal inferences

    Science.gov (United States)

    Hood, L. L.; Herbert, F.; Sonett, C. P.

    1982-01-01

    Simultaneous lunar surface and orbital magnetometer records are reexamined, to ascertain intervals which may be suitable for measuring lunar inductive response in the solar wind and terrestrial magnetosheath. Power spectral estimates of the response tangent to the lunar surface, defined in terms of transfer and gain functions, are obtained for the 0.0001-0.01 Hz frequency range. The maximum consistency of estimates from different time intervals is found when the initial analysis is limited to the tangential direction of maximum incident power, or that direction in which the ratio of signal to background noise is greatest. Spherically symmetric plasma confinement theory is used in the interpretation of transfer function data, by way of forward model calculations, under the assumption of continuous electrical conductivity increase with depth. Results are presented for internal electrical conductivity profile, metallic core radius, and selenotherm limits.

  4. DEPTH CONTINUOUS HYDRAULIC CONDUCTIVITY PROFILING USING AN ACTIVE SOURCE PENETROMETER

    Science.gov (United States)

    Fitzgerald, M.; Elsworth, D.

    2009-12-01

    A method is developed to recover depth-continuous hydraulic conductivity profiles of an unconsolidated saturated aquifer using an active source penetrometer, the Hydraulic Profiling Tool (HPT). The tool yields estimates of K through continuous injection of fluid in the subsurface from a small port on the probe shaft while controlled measurements of net applied fluid pressure required to maintain a specified flow rate (typically 350 mL/min) are recorded. The tool gathers these data of flow rate and measured applied pressure during halted and constant-rate penetration (typically 2cm/sec) of the probe. The analysis is developed in two parts, first to explore the interplay between advective effects controlled by penetration rate and secondly flow volume effects controlled by the targeted flow rate. These two effects are analyzed through their respective influence on the measured applied pressure response in ΔP/σv’-Q/ΔP space, which shows a linear relationship for the flow rate to applied pressure response when Q/ΔP > 1 and when Q/ΔP 1. The analysis shows that penetration rate does not significantly influence the applied pressure response at the tested penetration rates (0 ≤ U(cm/s)≤ 4). The targeted applied flow rate does however influence the applied pressure response as flow rates less than ~300 mL/min show a scattering of the data in ΔP/σv’-Q/ΔP space, where above 300 mL/min the data begins to form a linear response. A targeted flow rate of QT = 400mL/min is suggested as a suitable flow rate based on this analysis. Measurements of hydraulic conductivity are then obtained for the HPT data through the derivation of an equation based on a recast form of Darcy’s law where considerations of the flow geometry as K = (QHPT/ΔP)(δw/πΦ). K profiles obtained for the HPT system are then compared against K profiles obtained from an independent method (PSU permeameter) and yield a good correlation between the two methods.

  5. Psychosocial profiles of Irish children with conduct disorders, mixed disorders of conduct and emotion and emotional disorders

    OpenAIRE

    1995-01-01

    This paper reports on a retrospective archival study. Forty-one conduct disorder cases, 20 cases with mixed disorders of conduct and emotions and 23 emotional disorder cases were compared on demographic, behavioural and contextual variables. The pattern of treatment received by each group and their therapeutic outcomes were also compared. The three groups had similar demographic characteristics but distinctive psychosocial profiles. Conduct disordered cases showed a predominance of covert beh...

  6. MEASURING VERTICAL PROFILES OF HYDRAULIC CONDUCTIVITY WITH IN SITU DIRECT-PUSH METHODS

    Science.gov (United States)

    U.S. EPA (Environmental Protection Agency) staff developed a field procedure to measure hydraulic conductivity using a direct-push system to obtain vertical profiles of hydraulic conductivity. Vertical profiles were obtained using an in situ field device-composed of a Geopr...

  7. Application of Electromagnetic Induction to Monitor Changes in Soil Electrical Conductivity Profiles in Arid Agriculture

    KAUST Repository

    Jadoon, K.Z.

    2015-09-06

    In this research, multi-configuration electromagnetic induction (EMI) measurements were conducted in a corn field to estimate variation in soil electrical conductivity profiles in the roots zone. Electromagnetic forward model based on the full solution of Maxwell\\'s equation was used to simulate the apparent electrical conductivity measured with EMI system (the CMD mini-Explorer). Joint inversion of multi-configuration EMI measurements were performed to estimate the vertical soil electrical conductivity profiles. The inversion minimizes the misfit between the measured and modeled soil apparent electrical conductivity by DiffeRential Evolution Adaptive Metropolis (DREAM) algorithm, which is based on Bayesain approach. Results indicate that soil electrical conductivity profiles have low values close to the corn plants, which indicates loss of soil moisture due to the root water uptake. These results offer valuable insights into future potential and emerging challenges in the development of joint analysis of multi-configuration EMI measurements to retrieve effective soil electrical conductivity profiles.

  8. Effect of asymmetric concentration profile on thermal conductivity in Ge/SiGe superlattices

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Konstanze R., E-mail: konstanze.hahn@dsf.unica.it [Department of Physics, University of Cagliari, Cittadella Universitaria, 09042 Monserrato (Italy); Cecchi, Stefano [Department of Epitaxy, Paul-Drude-Institut für Festkörperelektronik, Hausvogteiplatz 5-7, 10117 Berlin (Germany); Colombo, Luciano [Department of Physics, University of Cagliari, Cittadella Universitaria, 09042 Monserrato (Italy); Institut de Cieǹcia de Materials de Barcelona (ICMAB-CSIC), Campus UAB, Bellaterra, 08193 Barcelona (Spain); Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and The Barcelona Institute of Science and Technology, Campus UAB, Bellaterra, 08193 Barcelona (Spain)

    2016-05-16

    The effect of the chemical composition in Si/Ge-based superlattices on their thermal conductivity has been investigated using molecular dynamics simulations. Simulation cells of Ge/SiGe superlattices have been generated with different concentration profiles such that the Si concentration follows a step-like, a tooth-saw, a Gaussian, and a gamma-type function in direction of the heat flux. The step-like and tooth-saw profiles mimic ideally sharp interfaces, whereas Gaussian and gamma-type profiles are smooth functions imitating atomic diffusion at the interface as obtained experimentally. Symmetry effects have been investigated comparing the symmetric profiles of the step-like and the Gaussian function to the asymmetric profiles of the tooth-saw and the gamma-type function. At longer sample length and similar degree of interdiffusion, the thermal conductivity is found to be lower in asymmetric profiles. Furthermore, it is found that with smooth concentration profiles where atomic diffusion at the interface takes place the thermal conductivity is higher compared to systems with atomically sharp concentration profiles.

  9. Effect of asymmetric concentration profile on thermal conductivity in Ge/SiGe superlattices

    Science.gov (United States)

    Hahn, Konstanze R.; Cecchi, Stefano; Colombo, Luciano

    2016-05-01

    The effect of the chemical composition in Si/Ge-based superlattices on their thermal conductivity has been investigated using molecular dynamics simulations. Simulation cells of Ge/SiGe superlattices have been generated with different concentration profiles such that the Si concentration follows a step-like, a tooth-saw, a Gaussian, and a gamma-type function in direction of the heat flux. The step-like and tooth-saw profiles mimic ideally sharp interfaces, whereas Gaussian and gamma-type profiles are smooth functions imitating atomic diffusion at the interface as obtained experimentally. Symmetry effects have been investigated comparing the symmetric profiles of the step-like and the Gaussian function to the asymmetric profiles of the tooth-saw and the gamma-type function. At longer sample length and similar degree of interdiffusion, the thermal conductivity is found to be lower in asymmetric profiles. Furthermore, it is found that with smooth concentration profiles where atomic diffusion at the interface takes place the thermal conductivity is higher compared to systems with atomically sharp concentration profiles.

  10. Profiles of relative permittivity and electrical conductivity from unsaturated soil water content models

    Directory of Open Access Journals (Sweden)

    Roberta Porretta

    2016-07-01

    Full Text Available A mathematical model of water diffusion in the vadose zone has been implemented for different types of soil textures in order to determine the soil water content (SWC profiles in dependence of depth and time. From these profiles, obtained for different soils, we derived the characteristic electrical parameters, such as relative permittivity (epsilonr and electrical conductivity (sigma, and their variation in time, employing empirical relations available in the scientific literature. The simulation through mathematical models has been performed taking into account different types of soils characterized by the percentage composition of sand, clay and silt in the textural triangle, which provides some physical and chemical properties that affect the water retention in the soil. The resulting simulated profiles of SWC and consequently permittivity and conductivity profiles, span over a certain range of values suggesting the best techniques and the limits in geophysical investigation. Moreover this a-prior knowledge helps in the elaboration and interpretation of permittivity and conductivity data obtained by the measurements. Permittivity and conductivity profiles are particularly useful in some environmental applications when the soil textures are (or supposed to be known as in the typical case of landfill leachate dispersion. Since the soil textures beneath or nearby a disposal waste are characterized by a SWC, the values of (epsilonr and (sigma at various depth can be directly inferred.

  11. Empathy in Children with Autism and Conduct Disorder: Group-Specific Profiles and Developmental Aspects

    Science.gov (United States)

    Schwenck, Christina; Mergenthaler, Julia; Keller, Katharina; Zech, Julie; Salehi, Sarah; Taurines, Regina; Romanos, Marcel; Schecklmann, Martin; Schneider, Wolfgang; Warnke, Andreas; Freitag, Christine M.

    2012-01-01

    Background: A deficit in empathy is discussed to underlie difficulties in social interaction of children with autism spectrum disorder (ASD) and conduct disorder (CD). To date, no study has compared children with ASD and different subtypes of CD to describe disorder-specific empathy profiles in clinical samples. Furthermore, little is known about…

  12. Analyzing Conductivity Profiles in Stream Waters Influenced by Mine Water Discharges

    Science.gov (United States)

    Räsänen, Teemu; Hämäläinen, Emmy; Hämäläinen, Matias; Turunen, Kaisa; Pajula, Pasi; Backnäs, Soile

    2015-04-01

    Conductivity is useful as a general measure of stream water quality. Each stream inclines to have a quite constant range of conductivity that can be used as a baseline for comparing and detecting influence of contaminant sources. Conductivity in natural streams and rivers is affected primarily by the geology of the watershed. Thus discharges from ditches and streams affect not only the flow rate in the river but also the water quality and conductivity. In natural stream waters, the depth and the shape of the river channel change constantly, which changes also the water flow. Thus, an accurate measuring of conductivity or other water quality indicators is difficult. Reliable measurements are needed in order to have holistic view about amount of contaminants, sources of discharges and seasonal variation in mixing and dilution processes controlling the conductivity changes in river system. We tested the utility of CastAway-CTD measuring device (SonTek Inc) to indicate the influence of mine waters as well as mixing and dilution occurring in the recipient river affected by treated dewatering and process effluent water discharges from a Finnish gold mine. The CastAway-CTD measuring device is a small, rugged and designed for profiling of depths of up to 100m. Device measures temperature, salinity, conductivity and sound of speed using 5 Hz response time. It has also built-in GPS which produces location information. CTD casts are normally used to produce vertical conductivity profile for rather deep waters like seas or lakes. We did seasonal multiple Castaway-CTD measurements during 2013 and 2014 and produced scaled vertical and horizontal profiles of conductivity and water temperature at the river. CastAway-CTD measurement pinpoints how possible contaminants behave and locate in stream waters. The conductivity profiles measured by CastAway-CTD device show the variation in maximum conductivity values vertically in measuring locations and horizontally in measured cross

  13. Responses of atmospheric electric field and air-earth current to variations of conductivity profiles

    Science.gov (United States)

    Makino, M.; Ogawa, T.

    1984-05-01

    A global circuit model is constructed to study responses of air-earth current and electric field to a variation of atmospheric electrical conductivity profile. The model includes the orography and the global distribution of thunderstorm generators. The conductivity varies with latitude and exponentially with altitude. The thunderstorm cloud is assumed to be a current generator with a positive source at the top and a negative one at the bottom. The UT diurnal variations of the global current and the ionospheric potential are evaluated considering the local-time dependence of thunderstorm activity. The global distribution of the electric field and the air-earth current are affected by the orography and latitudinal effects. Assuming a variation of conductivity profile, responses of atmospheric electrical parameters are investigated. The nonuniform decrement of the conductivity with altitude increases both the electric field and the air-earth current. The result suggests a possibility that the increment of the electric field and the air-earth current after a solar flare may be caused by this scheme, due to Forbush decrease.

  14. Optimal shape profiles for cooling fins of high and low conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Bobaru, Florin; Rachakonda, Srinivas [Nebraska Univ., Dept. of Engineering Mechanics, Lincoln, NE (United States)

    2004-11-01

    We present a numerical approach able to capture the dependence of the optimal shape profiles of thermal fins on the conductivity parameters. We consider the two-dimensional cross-section of a periodic array of fins and involve the third dimension via the thermal boundary layer. The highly conductive fins converge to 'sharp-pointed', narrow base shapes while the low conductivity ones prefer blunted, wide base fins. The optimal shapes we obtain are similar to the shapes of intestinal villi and stegosaurus plates. A meshfree method, coupled with a gradient-based optimization algorithm, is used to handle the significant shape changes from a simple, generic initial guess to the final, optimal shape. We reach the optimal shapes without remeshing. (Author)

  15. Determining the effects of thermal conductivity on epoxy molds using profiled cooling channels with metal inserts

    Energy Technology Data Exchange (ETDEWEB)

    Altaf, Khurram; Rani, Abdul Ahmad Majdi; Ahmad, Faiz; Baharom, Masri [Mechanical Engineering Dept., Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Perak (Malaysia); Raghavan, Vijay R. [OYL Manufacturing, Sungai Buloh (Malaysia)

    2016-11-15

    Polymer injection molds are generally manufactured with metallic materials, such as tool steel, which provide reliable working of molds and extended service life. The manufacture of injection molds with steel is a prolonged process because of the strength of steel. For a short prototype production run, one of the suitable choices could be the use of aluminum-filled epoxy material, which can produce a functional mold in a short time as compared with a conventionally machined tool. Aluminum-filled epoxy tooling is a good choice for short production runs for engineering applications, yet works best for relatively simple shapes. The advantages in relation to the fabrication of injection molds with epoxy-based materials include time saving in producing the mold, epoxy curing at ambient temperature, and ease of machining and post processing. Nevertheless, one major drawback of epoxy material is its poor thermal conductivity, which results in a relatively longer cooling time for epoxy injection molds. This study investigates some of the innovative ideas for enhancing the thermal conductivity for epoxy molds. The basic concept behind these ideas was to embed a highly thermally conductive metal insert within the mold between cavities with an innovative design of cooling channels called profiled cooling channels. This technique will increase the effective thermal conductivity of the epoxy mold, leading to the reduction in cooling time for the injection molded polymer part. Experimental analysis conducted in the current study also verified that the mold with profiled cooling channels and embedded metal insert has significantly reduced the cooling time.

  16. Conductivity-Temperature-Depth (CTD) profile data in the National Park of American Samoa, Tutuila, American Samoa, 2015

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Spatial surveys of water column physical properties were acquired with a conductivity-temperature-depth (CTD) profiler for four days in February 2015 and one day in...

  17. Effect of Magnetic Mirror on the Asymmetry of the Radial Profile of Near-Wall Conductivity in Hall Thrusters

    Institute of Scientific and Technical Information of China (English)

    YU Daren; LIU Hui; FU Haiyang

    2009-01-01

    Considering the actual magnetic field configuration in a Hall thruster, the effect of magnetic mirror on the radial profile of near-wall conductivity (NWC) is studied in this paper. The plasma electron dynamic process is described by the test particle method. The Monte Carlo scheme is used to solve this model. The radial profile of electron mobility is obtained and the role of magnetic mirror in NWC is analysed both theoretically and numerically. The numerical results show that the electron mobility peak due to NWC is inversely proportional to the magnetic mirror ratio and the asymmetry of electron mobility along the radial direction gets greater when the magnetic mirror is considered. This effect indicates that apart from the disparity in the magnetic field strength, the difference in the magnetic mirror ratio near the inner and outer walls would actually augment the asymmetry of the radial profile of NWC in Hall thrusters.

  18. Optimal Density Profile of the Plasma Layer Shielded by a Conducting Surface for the Absorption of Electromagnetic Waves

    Institute of Scientific and Technical Information of China (English)

    王舸; 曹金祥; 宋法伦

    2003-01-01

    Based on the Born approximation, we reduce the approximate analysis solution to the normal and oblique incident electromagnetic wave scattering from the weakly ionized plasma layer shielded by a conducting surface. The solution is closely related to the density profile of the plasma layer. Employing the self-consistent base function, we yield the optimal density profile for the nonuniform plasma layer with the frequencies of incident electromagnetic waves ranging from 4-10 GHz. Numerical studies illustrate the optimal density profile can "survive" wide ranges of the plasma parameters. Different from the validity condition for the Wenzell-Kramers-Brillouin-Jeffreys (WKBJ) approximation, the Born approximation is feasible even if the scale length is smaller than the wavelength.Therefore, the Born approximation is universal against the scattering problem from the weakly ionized plasma.

  19. The application of thermal conductivity measurements to the Kuqa River profile, China, and implications for petrochemical generation.

    Science.gov (United States)

    Feng, Jiarui; Gao, Zhiyong; Zhu, Rukai; Luo, Zhong; Zhang, Linyan

    2013-01-01

    Measurement of thermal conductivity of rocks is important to understand the thermal properties of earth materials, the characteristics of terrestrial heat flow, and the formation of oil. In this paper we report thermal conductivity, thermal diffusivity, and heat capacity data for 12 conglomerate, sandstone, and gypsum-bearing samples from the Paleogene Kuqa River profile in Kuqa, China. Samples were measured via the hot disk technique, yielding thermal conductivity values of 0.436 to 0.998 W/mK, thermal diffusivity measurements of 0.395 to 1.314 mm(2)/s, and heat capacity values of 0.439 to 1.717 MJ/m(3)K. These analyses reveal that gypsum-bearing rocks, with their low thermal conductivity, can act as excellent insulators over oil and gas reservoirs, aiding the formation and thermal maturation of petroleum.

  20. Sub-nA spatially resolved conductivity profiling of surface and interface defects in ceria films

    Energy Technology Data Exchange (ETDEWEB)

    Farrow, Tim; Kumar, Amit, E-mail: a.kumar@qub.ac.uk [Centre for Nanostructured Media, School of Mathematics and Physics, Queen’s University Belfast, Belfast BT7 1NN (United Kingdom); Yang, Nan [CNR-SPIN and Engineering Faculty, Università degli studi Niccolò Cusano, Rome I-00166 (Italy); Doria, Sandra; Balestrino, Giuseppe [CNR-SPIN and DICCI Dipartiment, Università di Roma Tor Vergata, Via del Politecnico 1, I-00133 Rome (Italy); Belianinov, Alex; Jesse, Stephen; Kalinin, Sergei V. [Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States); Arruda, Thomas M. [Chemistry Department, Salve Regina University, Newport, Rhode Island 02840 (United States)

    2015-03-01

    Spatial variability of conductivity in ceria is explored using scanning probe microscopy with galvanostatic control. Ionically blocking electrodes are used to probe the conductivity under opposite polarities to reveal possible differences in the defect structure across a thin film of CeO{sub 2}. Data suggest the existence of a large spatial inhomogeneity that could give rise to constant phase elements during standard electrochemical characterization, potentially affecting the overall conductivity of films on the macroscale. The approach discussed here can also be utilized for other mixed ionic electronic conductor systems including memristors and electroresistors, as well as physical systems such as ferroelectric tunneling barriers.

  1. Sub-nA spatially resolved conductivity profiling of surface and interface defects in ceria films

    Directory of Open Access Journals (Sweden)

    Tim Farrow

    2015-03-01

    Full Text Available Spatial variability of conductivity in ceria is explored using scanning probe microscopy with galvanostatic control. Ionically blocking electrodes are used to probe the conductivity under opposite polarities to reveal possible differences in the defect structure across a thin film of CeO2. Data suggest the existence of a large spatial inhomogeneity that could give rise to constant phase elements during standard electrochemical characterization, potentially affecting the overall conductivity of films on the macroscale. The approach discussed here can also be utilized for other mixed ionic electronic conductor systems including memristors and electroresistors, as well as physical systems such as ferroelectric tunneling barriers.

  2. A 1-D radiative conductive model to study the SOIR/VEx thermal profiles

    Science.gov (United States)

    Mahieux, Arnaud; Erwin, Justin T.; Chamberlain, Sarah; Robert, Séverine; Carine Vandaele, Ann; Wilquet, Valérie; Thomas, Ian; Yelle, Roger V.; Bertaux, Jean-Loup

    2015-04-01

    SOIR is an infrared spectrometer on board Venus Express that probes the Venus terminator region since 2006. The measurements are taken on the morning and evening sides of the terminator, covering all latitudes from the North Pole to the South Pole. Its wavelength range - 2.2 to 4.3 μm - allows a detailed chemical inventory of the Venus atmosphere [1-5], such as CO2, CO, H2O, HCl, HF, SO2 and aerosols. CO2 is detected from 70 km up to 165 km, CO from 70 km to 140 km, and the minor species typically below 110 km down to 70 km. Number density profiles of these species are computed from the measured spectra. Temperature profiles are obtained while computing the spectral inversion of the CO2 spectra combined with the hydrostatic law [6]. These temperature measurements show a striking permanent temperature minimum (at 125 km) and a weaker temperature maximum (over 100-115 km). The time variability of the CO2 density profiles spans over two orders of magnitude, and a clear trend is seen with latitude. The temperature variations are also important, of the order of 35 K for a given pressure level, but the latitude variation are small. Miss-RT, a 1D radiative transfer model has been developed to reproduce the SOIR terminator profiles, derived from the Mars thermosphere code presented in [7]. This model has been expanded to better account for the CO2, CO, and O non-LTE radiative heating and cooling processes which have to be considered in the dense atmosphere of Venus. Radiative cooling by minor species detected by SOIR (e.g. HCl, SO2, and H2O) are found to be small in comparison to the 15 μm CO2 cooling. Aerosol cooling in the 60-90km altitude range may be important to the thermal balance. There is a good agreement between the 1D model temperature profile and the mean SOIR temperature profile. Further we can suggest parameters that can be adjusted to improve the agreement between the model and measurements. The remaining differences can be attributed to the atmosphere

  3. Thermal conductivity profile determination in proton-irradiated ZrC by spatial and frequency scanning thermal wave methods

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, C. [GRESPI, Multiscale Thermophysics Lab., Université de Reims Champagne-Ardenne URCA, Moulin de la Housse BP 1039, Reims 51687 (France); Department of Mechanical and Aerospace Engineering, Utah State University, Logan, Utah 84322 (United States); Chirtoc, M.; Horny, N.; Antoniow, J. S.; Pron, H. [GRESPI, Multiscale Thermophysics Lab., Université de Reims Champagne-Ardenne URCA, Moulin de la Housse BP 1039, Reims 51687 (France); Ban, H. [Department of Mechanical and Aerospace Engineering, Utah State University, Logan, Utah 84322 (United States)

    2013-10-07

    Using complementary thermal wave methods, the irradiation damaged region of zirconium carbide (ZrC) is characterized by quantifiably profiling the thermophysical property degradation. The ZrC sample was irradiated by a 2.6 MeV proton beam at 600 °C to a dose of 1.75 displacements per atom. Spatial scanning techniques including scanning thermal microscopy (SThM), lock-in infrared thermography (lock-in IRT), and photothermal radiometry (PTR) were used to directly map the in-depth profile of thermal conductivity on a cross section of the ZrC sample. The advantages and limitations of each system are discussed and compared, finding consistent results from all techniques. SThM provides the best resolution finding a very uniform thermal conductivity envelope in the damaged region measuring ∼52 ± 2 μm deep. Frequency-based scanning PTR provides quantification of the thermal parameters of the sample using the SThM measured profile to provide validation of a heating model. Measured irradiated and virgin thermal conductivities are found to be 11.9 ± 0.5 W m{sup −1} K{sup −1} and 26.7 ±1 W m{sup −1} K{sup −1}, respectively. A thermal resistance evidenced in the frequency spectra of the PTR results was calculated to be (1.58 ± 0.1) × 10{sup −6} m{sup 2} K W{sup −1}. The measured thermal conductivity values compare well with the thermal conductivity extracted from the SThM calibrated signal and the spatially scanned PTR. Combined spatial and frequency scanning techniques are shown to provide a valuable, complementary combination for thermal property characterization of proton-irradiated ZrC. Such methodology could be useful for other studies of ion-irradiated materials.

  4. New down-hole TDR method for deep profile soil water content and bulk electrical conductivity

    Science.gov (United States)

    Comprehensive irrigation and salinity management both require accurate knowledge of field soil water content and bulk electrical conductivity to depths greater than the root zone depth in agricultural fields. Scientists at the USDA-ARS Conservation & Production Research Laboratory, Bushland, Texas, ...

  5. An improved calibration method for the drift of the conductivity sensor on autonomous CTD profiling floats by θ- S climatology

    Science.gov (United States)

    Owens, W. Brechner; Wong, Annie P. S.

    2009-03-01

    An improved method to estimate the time-varying drift of measured conductivity from autonomous CTD profiling floats has been developed. This procedure extends previous methods developed by Wong, Johnson and Owens [2003. Delayed-mode calibration of autonomous CTD profiling float salinity data by θ- S climatology. Journal of Atmospheric and Oceanic Technology, 20, 308-318] and Böhme and Send [2005. Objective analyses of hydrographic data for referencing profiling float salinities in highly variable environments. Deep-Sea Research Part II, 52, 651-664]. It uses climatological salinity interpolated to the float positions and observed θ surfaces and chooses 10 'best' levels that are within well-mixed mode waters or deep homogeneous water masses. A piece-wise linear fit is used to estimate the temporally varying multiplicative adjustment to the float potential conductivities. An objective, statistical method is used to choose the breakpoints in the float time series where there are multiple drift trends. In the previous methods these breakpoints were chosen subjectively by manually splitting the time series into separate segments over which the fits were made. Our statistical procedure reduces the subjectivity by providing an automated way for doing the piece-wise linear fit. Uncertainties in this predicted adjustment are estimated using a Monte-Carlo simulation. Examples of this new procedure as applied to two Argo floats are presented.

  6. Monitoring gradient profile on-line in micro- and nano-high performance liquid chromatography using conductivity detection.

    Science.gov (United States)

    Zhang, Min; Chen, Apeng; Lu, Joann J; Cao, Chengxi; Liu, Shaorong

    2016-08-19

    In micro- or nano-flow high performance liquid chromatography (HPLC), flow-splitters and gradient elutions are commonly used for reverse phase HPLC separations. When a flow splitter was used at a high split-ratio (e.g., 1000:1 or higher), the actual gradient may deviate away from the programmed gradient. Sometimes, mobile phase concentrations can deviate by as much as 5%. In this work, we noticed that the conductivity (σ) of a gradient decreased with the increasing organic-solvent fraction (φ). Based on the relationship between σ and φ, a method was developed for monitoring gradient profile on-line to record any deviations in these HPLC systems. The conductivity could be measured by a traditional conductivity detector or a capacitively coupled contactless conductivity detector (C(4)D). The method was applied for assessing the performance of an electroosmotic pump (EOP) based nano-HPLC. We also observed that σ value of the gradient changed with system pressure; a=0.0175ΔP (R(2)=0.964), where a is the percentage of the conductivity increase and ΔP is the system pressure in bar. This effect was also investigated.

  7. Surface profile gradient in amorphous Ta2O5 semi conductive layers regulates nanoscale electric current stability

    Science.gov (United States)

    Cefalas, A. C.; Kollia, Z.; Spyropoulos-Antonakakis, N.; Gavriil, V.; Christofilos, D.; Kourouklis, G.; Semashko, V. V.; Pavlov, V.; Sarantopoulou, E.

    2017-02-01

    A link between the morphological characteristics and the electric properties of amorphous layers is established by means of atomic, conductive, electrostatic force and thermal scanning microscopy. Using amorphous Ta2O5 (a-Ta2O5) semiconductive layer, it is found that surface profile gradients (morphological gradient), are highly correlated to both the electron energy gradient of trapped electrons in interactive Coulombic sites and the thermal gradient along conductive paths and thus thermal and electric properties are correlated with surface morphology at the nanoscale. Furthermore, morphological and electron energy gradients along opposite conductive paths of electrons intrinsically impose a current stability anisotropy. For either long conductive paths (L > 1 μm) or along symmetric nanodomains, current stability for both positive and negative currents i is demonstrated. On the contrary, for short conductive paths along non-symmetric nanodomains, the set of independent variables (L, i) is spanned by two current stability/intability loci. One locus specifies a stable state for negative currents, while the other locus also describes a stable state for positive currents.

  8. Conductive heating and microwave hydrolysis under identical heating profiles for advanced anaerobic digestion of municipal sludge.

    Science.gov (United States)

    Mehdizadeh, Seyedeh Neda; Eskicioglu, Cigdem; Bobowski, Jake; Johnson, Thomas

    2013-09-15

    Microwave (2.45 GHz, 1200 W) and conventional heating (custom pressure vessel) pretreatments were applied to dewatered municipal waste sludge (18% total solids) using identical heating profiles that span a wide range of temperatures (80-160 °C). Fourteen lab-scale semi-continuous digesters were set up to optimize the energy (methane) output and sludge retention time (SRT) requirements of untreated (control) and thermally pretreated anaerobic digesters operated under mesophilic and thermophilic temperatures. Both pretreatment methods indicated that in the pretreatment range of 80-160 °C, temperature was a statistically significant factor (p-value heating, had no statistically significant effect (p-value >0.05) on sludge solubilization. With the exception of the control digesters at a 5-d SRT, all control and pretreated digesters achieved steady state at all three SRTs, corresponding to volumetric organic loading rates of 1.74-6.96 g chemical oxygen demand/L/d. At an SRT of 5 d, both mesophilic and thermophilic controls stopped producing biogas after 20 d of operation with total volatile fatty acids concentrations exceeding 1818 mg/L at pH <5.64 for mesophilic and 2853 mg/L at pH <7.02 for thermophilic controls, while the pretreated digesters continued producing biogas. Furthermore, relative (to control) organic removal efficiencies dramatically increased as SRT was shortened from 20 to 10 and then 5 d, indicating that the control digesters were challenged as the organic loading rate was increased. Energy analysis showed that, at an elevated temperature of 160 °C, the amount of methane recovered was not enough to compensate for the energy input. Among the digesters with positive net energy productions, control and pretreated digesters at 80 °C were more favorable at an SRT of 10 d.

  9. How to chase a tracer - combining conventional salt tracer testing and direct push electrical conductivity profiling for enhanced aquifer characterization

    Science.gov (United States)

    Vienken, Thomas; Huber, Emanuel; Kreck, Manuel; Huggenberger, Peter; Dietrich, Peter

    2017-01-01

    Tracer testing is a well-established technique in hydrogeological site characterization. However, certain a priori knowledge of the hydraulic regime is required beforehand to avoid test failure, e.g. miss of tracer. In this study, we propose a novel tracer test concept for the hydraulic characterization of shallow unconsolidated sedimentary deposits when only scarce a priori information on the hydraulic regime is available. Therefore, we combine conventional salt tracer testing with direct push vertical high resolution electrical conductivity logging. The proposed tracer test concept was successfully tested on coarse, braided river deposits of the Tagliamento River, Italy. With limited a priori information available two tracer tests were performed in three days to reliably determine ground water flow direction and velocity allowing on-site decision-making to adaptively install observation wells for reliable breakthrough curve measurements. Furthermore, direct push vertical electrical profiling provided essential information about the plume characteristics with outstanding measurement resolution and efficiency.

  10. Development of the conductivity thermal logs based on electrical profiles; Desenvolvimento de perfil de condutividade termica a partir de perfis eletricos

    Energy Technology Data Exchange (ETDEWEB)

    Jesus, Carlos Luciano C. de; Lima, Olivar A.L. de; Argollo, Roberto M.; Romero, Pedro A. [Universidade Federal da Bahia, Salvador, BA (Brazil). Centro de Pesquisa em Geologia e Geofisica

    2004-07-01

    The thermal conductivity of the rocks is a necessary physical parameter for the calculation of the flow of heat in the terrestrial surface. The conventional methods to measure the thermal conductivity are developed in laboratory having used sample of certifications. However, these nor always are disposable by the industry of the oil, either because of difficulty operational either for its high cost. However, all the constructed wells of oil are stood geophysically, and, in the majority of the times the geophysical profiles are the only petrophysics registers of the wells, mainly when the same ones are not testified. A viable alternative for sedimentary rocks would be to determine the thermal conductivity through the electric conductivity, being this normally gotten in electric profiles of wells. As the electric conductivity and the thermal conductivity they depend on the porosity and of the texture of the rocks and these mathematically equivalents satisfy equations constituent, are intuitive to think that the same largeness can directly be correlated. Applying the same analytical theoretical procedure considered by Lima and Sharma (1990 and 1992) to describe the electric conductivity of clay-sand, we develop an expression to determine the thermal conductivity of clay-sandstone rocks. To test the applicability of this equation they had been used given of electric profile of five explore wells of the regions of Aracas and Miranga, both of the basin of Reconcavo. The results of the conversions are comparable with the ones of effected measures of thermal conductivity with the method of the bar for Carvalho (1981) in the terrigenous sequences of the Reconcavo. (author)

  11. Electrical conductivity of old oceanic mantle in the northwestern Pacific I: 1-D profiles suggesting differences in thermal structure not predictable from a plate cooling model

    Science.gov (United States)

    Baba, Kiyoshi; Tada, Noriko; Matsuno, Tetsuo; Liang, Pengfei; Li, Ruibai; Zhang, Luolei; Shimizu, Hisayoshi; Abe, Natsue; Hirano, Naoto; Ichiki, Masahiro; Utada, Hisashi

    2017-08-01

    Seafloor magnetotelluric (MT) experiments were recently conducted in two areas of the northwestern Pacific to investigate the nature of the old oceanic upper mantle. The areas are far from any tectonic activity, and "normal" mantle structure is therefore expected. The data were carefully analyzed to reduce the effects of coastlines and seafloor topographic changes, which are significant boundaries in electrical conductivity and thus distort seafloor MT data. An isotropic, one-dimensional electrical conductivity profile was estimated for each area. The profiles were compared with those obtained from two previous study areas in the northwestern Pacific. Between the four profiles, significant differences were observed in the thickness of the resistive layer beyond expectations based on cooling of homogeneous oceanic lithosphere over time. This surprising feature is now further clarified from what was suggested in a previous study. To explain the observed spatial variation, dynamic processes must be introduced, such as influence of the plume associated with the formation of the Shatsky Rise, or spatially non-uniform, small-scale convection in the asthenosphere. There is significant room of further investigation to determine a reasonable and comprehensive interpretation of the lithosphere-asthenosphere system beneath the northwestern Pacific. The present results demonstrate that electrical conductivity provides key information for such investigation.[Figure not available: see fulltext.

  12. Below and above boiling point comparison of microwave irradiation and conductive heating for municipal sludge digestion under identical heating/cooling profiles.

    Science.gov (United States)

    Hosseini Koupaie, E; Eskicioglu, C

    2015-01-01

    This research provides a comprehensive comparison between microwave (MW) and conductive heating (CH) sludge pretreatments under identical heating/cooling profiles at below and above boiling point temperatures. Previous comparison studies were constrained to an uncontrolled or a single heating rate due to lack of a CH equipment simulating MW under identical thermal profiles. In this research, a novel custom-built pressure-sealed vessel which could simulate MW pretreatment under identical heating/cooling profiles was used for CH pretreatment. No statistically significant difference was proven between MW and CH pretreatments in terms of sludge solubilization, anaerobic biogas yield and organics biodegradation rate (p-value>0.05), while statistically significant effects of temperature and heating rate were observed (p-valueheating/cooling rates) was controlled.

  13. The role of extracellular conductivity profiles in compartmental models for neurons: particulars for layer 5 pyramidal cells.

    Science.gov (United States)

    Wang, Kai; Riera, Jorge; Enjieu-Kadji, Herve; Kawashima, Ryuta

    2013-07-01

    With the rapid increase in the number of technologies aimed at observing electric activity inside the brain, scientists have felt the urge to create proper links between intracellular- and extracellular-based experimental approaches. Biophysical models at both physical scales have been formalized under assumptions that impede the creation of such links. In this work, we address this issue by proposing a multicompartment model that allows the introduction of complex extracellular and intracellular resistivity profiles. This model accounts for the geometrical and electrotonic properties of any type of neuron through the combination of four devices: the integrator, the propagator, the 3D connector, and the collector. In particular, we applied this framework to model the tufted pyramidal cells of layer 5 (PCL5) in the neocortex. Our model was able to reproduce the decay and delay curves of backpropagating action potentials (APs) in this type of cell with better agreement with experimental data. We used the voltage drops of the extracellular resistances at each compartment to approximate the local field potentials generated by a PCL5 located in close proximity to linear microelectrode arrays. Based on the voltage drops produced by backpropagating APs, we were able to estimate the current multipolar moments generated by a PCL5. By adding external current sources in parallel to the extracellular resistances, we were able to create a sensitivity profile of PCL5 to electric current injections from nearby microelectrodes. In our model for PCL5, the kinetics and spatial profile of each ionic current were determined based on a literature survey, and the geometrical properties of these cells were evaluated experimentally. We concluded that the inclusion of the extracellular space in the compartmental models of neurons as an extra electrotonic medium is crucial for the accurate simulation of both the propagation of the electric potentials along the neuronal dendrites and the

  14. Rietveld neutron powder profile analysis and electrical conductivity of the fast silver-ion conductor (LaO)AgS

    Energy Technology Data Exchange (ETDEWEB)

    Wilmer, D.; Wuensch, B. J.; Jorgensen, J. D.

    1999-11-18

    Lanthanum silver oxysulfide, (LaO)AgS, exhibits a predominantly ionic conductivity of 10{sup {minus}3} to 10{sup {minus}1} S/cm between 300 K and 770 K. The tetragonal structure consists of alternating (LaO) and (AgS) sheets, their sequence being O-La-S-Ag-S-La-O. The structure suggests that ionic transport arises from migration of silver ions within the AgS layers analogous to sodium ion transport in Na-{beta}-alumina. Neutron powder diffraction data measured at five temperatures between 300 K and 770 K are analyzed using the Rietveld method to determine the distribution and thermal vibration parameters of the mobile silver ions. The structural investigation is accompanied by measurements of the total conductivity in the same temperature range in order to resolve severe discrepancies in the literature data.

  15. Admittance–voltage profiling of Al{sub x}Ga{sub 1−x}N/GaN heterostructures: Frequency dependence of capacitance and conductance

    Energy Technology Data Exchange (ETDEWEB)

    Köhler, K.; Pletschen, W.; Godejohann, B.; Müller, S.; Menner, H. P.; Ambacher, O. [Fraunhofer-Institut für Angewandte Festkörperphysik, Tullastraße 72, 79108 Freiburg (Germany)

    2015-11-28

    Admittance–voltage profiling of Al{sub x}Ga{sub 1−x}N/GaN heterostructures was used to determine the frequency dependent capacitance and conductance of FET devices in the frequency range from 50 Hz to 1 MHz. The nominally undoped low pressure metal-organic vapor-phase epitaxy structures were grown with an Al-content of 30%. An additional 1 nm thick AlN interlayer was placed in one structure before the Al{sub 0.3}Ga{sub 0.7}N layer growth. For frequencies below 10{sup 8} Hz it is convenient to use equivalent circuits to represent electric or dielectric properties of a material, a method widely used, for example, in impedance spectroscopy. We want to emphasize the relation between frequency dependent admittance–voltage profiling and the corresponding equivalent circuits to the complex dielectric function. Debye and Drude models are used for the description of the frequency dependent admittance profiles in a range of depletion onset of the two-dimensional electron gas. Capacitance- and conductance-frequency profiles are fitted in the entire measured range by combining both models. Based on our results, we see contributions to the two-dimensional electron gas for our samples from surface states (80%) as well as from background doping in the Al{sub 0.3}Ga{sub 0.7}N barriers (20%). The specific resistance of the layers below the gate is above 10{sup 5} Ω cm for both samples and increases with increasing negative bias, i.e., the layers below the gate are essentially depleted. We propose that the resistance due to free charge carriers, determined by the Drude model, is located between gate and drain and, because of the AlN interlayer, the resistance is lowered by a factor of about 30 if compared to the sample without an AlN layer.

  16. Inverse modelling to estimate the profile of conductivity at saturation. A case study for a shallow layered soil

    Science.gov (United States)

    Negm, Amro; Barontini, Stefano; Bacchi, Baldassare

    2015-04-01

    An experimental field was installed in Summer 2012 in a mountain environment (Cividate Camuno, Oglio river basin, Central Italian Alps, 274 m a.s.l.) in order to investigate the soil-water balance and the effectiveness of the eddy correlation technique to measure the evapotranspirative fluxes in a complex topography. The soil is young, shallow and anthropized, grown on the debris of a power plant workings. The genetic sequence is given by A, C and D horizons, as it is common in many Alpine sites. USDA textural classes are silty loam (A, up to 9 cm depth), loam (upper C, 9 to 22 cm), silty clay loam (lower C, 22 to 28 cm) and silty loam (D, deeper than 38 cm), with increasing gravel fraction (pebbles) with depth. Due to the meaningful pebbles presence, the sampled soil cores were disturbed and considered reliable only for porosity, grains size distribution, water content and soil-water retention relationships. In the field a single ring infiltrometer was used to estimate the soil conductivity at saturation. Two infiltration tests were performed, in view of sampling the A-layer and the upper 10 centimeters of the C-layer. The great soil heterogeneity in the upper layers does not merge the hypotheses of the classical approaches to determine the soil conductivity after infiltration tests, therefore a methodology based on inverse modelling was developed. After a preliminary estimate of the conductivities of the A-layer (Ks,A) and of the C-layer (Ks,C) based on the hypothesis of steady percolation at the end of the infiltration tests, a 2D axisymmetrical model was set up for both the tests with the FV-FD AdHydra code, which numerically solves the Richards equation. Then the two infiltration tests were used to iteratively fit both Ks,A (first test) and Ks,C (second test), using as an initial condition for the simulation of the second test the tensiometer-pressure potential map given as an output of the simulation of the first test. The procedure rapidly converged to

  17. Time-Dependent Salinity and Temperature Structure of the Columbia River Salt Wedge and River Plume: Analysis of Conductivity/Temperature/Depth Profiles from Sensors Attached to Pinnipeds and Diving Waterbirds

    Science.gov (United States)

    2013-09-30

    Marine mammals and waterbirds have been used in the past to document water column properties in the ocean (Boehlert et al., 2001; Lydersen et al...Columbia River Salt Wedge and River Plume: Analysis of Conductivity/Temperature/Depth Profiles from Sensors Attached to Pinnipeds and Diving...2010; Padman et al., 2010). In this study, we utilize tagged marine animals in regions where water properties exhibit a high degree of variability

  18. Hydraulic conductivity obtained by instantaneous profile method using retention curve and neutron probes and Genuchten model; Condutividade hidraulica obtida pelo metodo do perfil instantaneo utilizando curva de retencao e sonda de neutrons e pelo modelo de Genuchten

    Energy Technology Data Exchange (ETDEWEB)

    Berretta, Ana Lucia Olmedo

    1999-07-01

    The hydraulic conductivity is one of the most important parameters to understand the movement of water in the unsaturated zone. Reliable estimations are difficult to obtain, once the hydraulic conductivity is highly variable. This study was carried out at 'Escola Superior de Agricultura Luiz de Queiroz', Universidade de Sao Paulo, in a Kandiudalfic Eutrudox soil. The hydraulic conductivity was determined by a direct and an indirect method. The instantaneous profile method was described and the hydraulic conductivity as a function of soil water content was determined by solving the Richards equation. Tensiometers were used to estimate the total soil water potential, and the neutron probe and the soil retention curve were used to estimate soil water content in the direct method. The neutron probe showed to be not adequately sensible to the changes of soil water content in this soil. Despite of the soil retention curve provides best correlation values to soil water content as a function of water redistribution time, the soil water content in this soil did not vary too much till the depth of 50 cm, reflecting the influence of the presence of a Bt horizon. The soil retention curve was well fitted by the van Genuchten model used as an indirect method. The values of the van Genuchten and the experimental relative hydraulic conductivity obtained by the instantaneous profile method provided a good correlation. However, the values estimated by the model were always lower than that ones obtained experimentally. (author)

  19. Effect of chemical composition on microstructure, hardness and electrical conductivity profiles of the Bi-Cu-Ga alloys at 100 °C

    Directory of Open Access Journals (Sweden)

    Dejan Gurešić

    2016-09-01

    Full Text Available Theoretical calculation and experimental investigation of the isothermal section of a ternary Bi-Cu-Ga system at 100 oC are presented in this paper. Thermodynamic binary-based calculation of the isothermal section was performed using Pandat software. Experimental investigation included microstructural analysis carried out using light optical microscopy (LOM and scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS, phase composition analysis using X-ray diffraction (XRD, Brinell and Vickers hardness testing and electrical conductivity measurements. In total, thirty alloy samples with compositions along three vertical sections Bi-CuGa, Cu-BiGa and Ga-BiCu were studied. The obtained experimental results support the calculated phase regions of the isothermal section at 100 oC. Hardness of individual phases as well as hardness and electrical conductivity of the studied alloys were measured. Based on the experimentally obtained results iso-lines of Brinell hardness and electrical conductivity along the whole compositional range were calculated by using appropriate mathematical models.

  20. Frequency and voltage dependence dielectric properties, ac electrical conductivity and electric modulus profiles in Al/Co{sub 3}O{sub 4}-PVA/p-Si structures

    Energy Technology Data Exchange (ETDEWEB)

    Bilkan, Çiğdem, E-mail: cigdembilkan@gmail.com [Department of Physics, Faculty of Sciences, The University of Çankırı Karatekin, 18100 Çankırı (Turkey); Azizian-Kalandaragh, Yashar [Department of Physics, Faculty of Science, The University of Mohaghegh Ardabili, Ardabil (Iran, Islamic Republic of); Altındal, Şemsettin [Department of Physics, Faculty of Sciences, The University of Gazi, 06500 Ankara (Turkey); Shokrani-Havigh, Roya [Department of Physics, Faculty of Science, The University of Mohaghegh Ardabili, Ardabil (Iran, Islamic Republic of)

    2016-11-01

    In this research a simple microwave-assisted method have been used for preparation of cobalt oxide nanostructures. The as-prepared sample has been investigated by UV–vis spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM). On the other hand, frequency and voltage dependence of both the real and imaginary parts of dielectric constants (ε′, ε″) and electric modulus (M′ and M″), loss tangent (tanδ), and ac electrical conductivity (σ{sub ac}) values of Al/Co{sub 3}O{sub 4}-PVA/p-Si structures were obtained in the wide range of frequency and voltage using capacitance (C) and conductance (G/ω) data at room temperature. The values of ε′, ε″ and tanδ were found to decrease with increasing frequency almost for each applied bias voltage, but the changes in these parameters become more effective in the depletion region at low frequencies due to the charges at surface states and their relaxation time and polarization effect. While the value of σ is almost constant at low frequency, increases almost as exponentially at high frequency which are corresponding to σ{sub dc} and σ{sub ac}, respectively. The M′ and M″ have low values at low frequencies region and then an increase with frequency due to short-range mobility of charge carriers. While the value of M′ increase with increasing frequency, the value of M″ shows two peak and the peaks positions shifts to higher frequency with increasing applied voltage due to the decrease of the polarization and N{sub ss} effects with increasing frequency.

  1. Frequency and voltage dependence dielectric properties, ac electrical conductivity and electric modulus profiles in Al/Co3O4-PVA/p-Si structures

    Science.gov (United States)

    Bilkan, Çiğdem; Azizian-Kalandaragh, Yashar; Altındal, Şemsettin; Shokrani-Havigh, Roya

    2016-11-01

    In this research a simple microwave-assisted method have been used for preparation of cobalt oxide nanostructures. The as-prepared sample has been investigated by UV-vis spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM). On the other hand, frequency and voltage dependence of both the real and imaginary parts of dielectric constants (ε‧, ε″) and electric modulus (M‧ and M″), loss tangent (tanδ), and ac electrical conductivity (σac) values of Al/Co3O4-PVA/p-Si structures were obtained in the wide range of frequency and voltage using capacitance (C) and conductance (G/ω) data at room temperature. The values of ε‧, ε″ and tanδ were found to decrease with increasing frequency almost for each applied bias voltage, but the changes in these parameters become more effective in the depletion region at low frequencies due to the charges at surface states and their relaxation time and polarization effect. While the value of σ is almost constant at low frequency, increases almost as exponentially at high frequency which are corresponding to σdc and σac, respectively. The M‧ and M″ have low values at low frequencies region and then an increase with frequency due to short-range mobility of charge carriers. While the value of M‧ increase with increasing frequency, the value of M″ shows two peak and the peaks positions shifts to higher frequency with increasing applied voltage due to the decrease of the polarization and Nss effects with increasing frequency.

  2. Particle deposition in a realistic geometry of the human conducting airways: Effects of inlet velocity profile, inhalation flowrate and electrostatic charge.

    Science.gov (United States)

    Koullapis, P G; Kassinos, S C; Bivolarova, M P; Melikov, A K

    2016-07-26

    Understanding the multitude of factors that control pulmonary deposition is important in assessing the therapeutic or toxic effects of inhaled particles. The use of increasingly sophisticated in silico models has improved our overall understanding, but model realism remains elusive. In this work, we use Large Eddy Simulations (LES) to investigate the deposition of inhaled aerosol particles with diameters of dp=0.1,0.5,1,2.5,5 and 10μm (particle density of 1200kg/m(3)). We use a reconstructed geometry of the human airways obtained via computed tomography and assess the effects of inlet flow conditions, particle size, electrostatic charge, and flowrate. While most computer simulations assume a uniform velocity at the mouth inlet, we found that using a more realistic inlet profile based on Laser Doppler Anemometry measurements resulted in enhanced deposition, mostly on the tongue. Nevertheless, flow field differences due to the inlet conditions are largely smoothed out just a short distance downstream of the mouth inlet as a result of the complex geometry. Increasing the inhalation flowrate from sedentary to activity conditions left the mean flowfield structures largely unaffected. Nevertheless, at the higher flowrates turbulent intensities persisted further downstream in the main bronchi. For dp>2.5μm, the overall Deposition Fractions (DF) increased with flowrate due to greater inertial impaction in the oropharynx. Below dp=1.0μm, the DF was largely independent of particle size; it also increased with flowrate, but remained significantly lower. Electrostatic charge increased the overall DF of smaller particles by as much as sevenfold, with most of the increase located in the mouth-throat. Moreover, significant enhancement in deposition was found in the left and right lung sub-regions of our reconstructed geometry. Although there was a relatively small impact of inhalation flowrate on the deposition of charged particles for sizes dp<2.5μm, impaction prevailed over

  3. Conduct disorder

    Science.gov (United States)

    ... Conduct disorder is often linked to attention-deficit disorder . Conduct disorder also can be an early sign of ... child or teen has a history of conduct disorder behaviors. A physical examination and blood tests can help ...

  4. Perfis estratégicos de conduta social e ambiental: estudos na indústria têxtil nordestina Social and environmental strategic conduct profile: studies of Northeast Brazil textile industry

    Directory of Open Access Journals (Sweden)

    Mônica Cavalcanti Sá de Abreu

    2008-04-01

    Full Text Available O trabalho apresenta a avaliação das condutas sociais e ambientais na indústria têxtil nordestina, tendo por base o framework do modelo de avaliação da estratégia tríplice, denominado ECP-triplo (estrutura-conduta-performance-triplo. Com base neste modelo, uma empresa submetida a pressões da estrutura da indústria busca uma performance tríplice (econômica, ambiental e social e, para tanto, precisa estabelecer condutas claramente sociais e ambientais, além da econômica. A pesquisa na indústria têxtil nordestina foi realizada em empresas representativas do setor e instaladas nos estados do Ceará, Paraíba, Pernambuco e Rio Grande do Norte, através de entrevistas diretas. O estudo analisa as empresas em função do porte e identifica perfis estratégicos de condutas ambientais e sociais, segundo uma escala definida como fraca, intermediária ou forte. Os resultados indicam uma predominância de empresas que adotam condutas fracas. Comparativamente, existe uma maior preocupação com a conduta ambiental que a social. No geral, a medida que aumenta o porte da empresa e o seu acesso aos mercados internacionais, o perfil de conduta social e ambiental tende a um maior nível de responsabilidade.This paper presents a social and environmental behaviour assessment of Northeast Brazil textile industry using the strategic assessment framework, named the triple-SCP model. This model is an expansion of the structure-conduct-performance paradigm adding the assumption that the triple performance (economic, environmental and social of a company is the result of its competitive practices or conduct standards, depending on the industrial structure in which it operates. The data were collected from textile companies located in Ceará, Paraíba, Pernambuco and Rio Grande do Norte states through in-depth personal interviews. The study categorized companies by size and identified social and environmental strategic conduct profiles. The conduct of the

  5. Electrical Conductivity.

    Science.gov (United States)

    Hershey, David R.; Sand, Susan

    1993-01-01

    Explains how electrical conductivity (EC) can be used to measure ion concentration in solutions. Describes instrumentation for the measurement, temperature dependence and EC, and the EC of common substances. (PR)

  6. Conduct disorders

    NARCIS (Netherlands)

    Buitelaar, J.K.; Smeets, K.C.; Herpers, P.; Scheepers, F.; Glennon, J.; Rommelse, N.N.J.

    2013-01-01

    Conduct disorder (CD) is a frequently occurring psychiatric disorder characterized by a persistent pattern of aggressive and non-aggressive rule breaking antisocial behaviours that lead to considerable burden for the patients themselves, their family and society. This review paper updates diagnostic

  7. Conduction apraxia.

    Science.gov (United States)

    Ochipa, C; Rothi, L J; Heilman, K M

    1994-01-01

    A left hemisphere damaged patient with ideomotor apraxia is described, whose performance on pantomime to verbal command was superior to pantomime imitation. His reception of these same gestures (gesture naming) was spared. This syndrome has been named conduction apraxia. To account for this selective impaired performance on gesture imitation, a separation of the representations for gesture production and reception is proposed and a non-lexical gesture processing route for gesture imitation is suggested. Images PMID:7931387

  8. Conduction apraxia.

    OpenAIRE

    Ochipa, C; Rothi, L J; Heilman, K M

    1994-01-01

    A left hemisphere damaged patient with ideomotor apraxia is described, whose performance on pantomime to verbal command was superior to pantomime imitation. His reception of these same gestures (gesture naming) was spared. This syndrome has been named conduction apraxia. To account for this selective impaired performance on gesture imitation, a separation of the representations for gesture production and reception is proposed and a non-lexical gesture processing route for gesture imitation is...

  9. Conductivity Probe

    Science.gov (United States)

    2008-01-01

    The Thermal and Electrical Conductivity Probe (TECP) for NASA's Phoenix Mars Lander took measurements in Martian soil and in the air. The needles on the end of the instrument were inserted into the Martian soil, allowing TECP to measure the propagation of both thermal and electrical energy. TECP also measured the humidity in the surrounding air. The needles on the probe are 15 millimeters (0.6 inch) long. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  10. Conducted Vasoreactivity

    DEFF Research Database (Denmark)

    Postnov, D. E.; Neganova, A Y; Sosnovtseva, Olga

    2015-01-01

    , the underlying mechanisms are debated. Here, we focus on dynamical aspects of the problem hypothesizing the existence of a bistability-powered mechanism for regenerative pulse transmission along the endothelium. Bistability implies that the cell can have two different stable resting potentials and can switch......Conducted vasodilation is part of the physiological response to increasing metabolic demand of the tissue. Similar responses can be elicited by focal electrical or chemical stimulation. Some evidence suggests an endothelial pathway for nondecremental transmission of hyperpolarizing pulses. However...... a theoretical analysis as well as numerical simulations of both single- and multiunit bistable systems mimicking endothelial cells to investigate the self-consistence and stability of the proposed mechanism. We find that the individual cell may switch readily between two stable potentials. An array of coupled...

  11. 用迭代方法和双共轭梯度法重建二维电导率剖面分布%Reconstruction of the 2-Dimensional Inhomogeneous Conductivity Profile Using Iterative and Bi-Conjugate Gradient Method

    Institute of Scientific and Technical Information of China (English)

    杨峰; 聂在平

    2000-01-01

    本文着重阐述采用积分方程的迭代方法并结合双共轭梯度(BCG)法对低频近场非均匀背景介质中二维轴对称电导率剖面的反演,并仅用z向采集的数据进行目标重建。首先,基于待反演目标区内、外的电场积分方程。建立起反演积分方程,将积分方程离散化为矩阵方程,用迭代方法求解目标区电导率分布。在每次迭代过程中,格林函数不断被更新。同时用正则化方法来消除解的不适定性。文中利用不完备的测量数据对复杂的电导率剖面进行了反演。数值模拟结果表明本文方法与文献[8]相比,且有更快的收敛速度和更高的成象质量。%In this paper,the inversion and reconstruction of 2-dimensional inhomogeneous conductivity profile for low-frquency near field using iterative algorithm and bi-conjugate gradient method (BCG) is decribed. Based on the internal and external electric field integration equations, the inversion equation is derived. By using the method of moments ,the integral equation can be discretized into matrix form. The Green′s function is updated in every iteration step. Then, ill-posed problem is circumvented by imposing additional constraints on the solution using the Tikhonov regularzation method. Numerical results show that this method is of faster convergence and higher inverse quality than that which introduced in reference [8].

  12. [Conduct disorders].

    Science.gov (United States)

    Stadler, Christina

    2014-05-01

    The diagnosis conduct disorder (CD) is characterized by aggressive (e.g., physical aggression) as well as nonaggressive symptoms (e.g., violation of rules, truancy). Conclusions regarding the course and prognosis, or recommendations for effective interventions, seem not to be equally valid for the whole patient group. DSM-IV-TR included subtyping age-of-onset as a prognostic criterion, even though the evidence base for subtyping from age of onset was rather sparse. The relevant literature on CD has grown substantially since the publication of DSM-IV-TR in 1994. For the new DSM-5 edition, some important issues were discussed, for example, consideration of personality traits, female-specific or dimensional criteria, and adding a childhood-limited subtype (Moffitt et al., 2008). Nevertheless, the diagnostic protocol for CD was not changed in the most parts in the new edition of the DSM-5; the addition of a CD specifier with limited emotions is the most relevant change. On the basis of the existing evidence base, this review discusses whether the modifications in DSM-5 are helpful for fulfilling the requirements of a reliable and valid psychiatric classification.

  13. Lipid Profile

    Science.gov (United States)

    ... AACC products and services. Advertising & Sponsorship: Policy | Opportunities Lipid Profile Share this page: Was this page helpful? Also ... as: Lipid Panel; Coronary Risk Panel Formal name: Lipid Profile Related tests: Cholesterol ; HDL Cholesterol ; LDL Cholesterol ; Triglycerides ; ...

  14. Data Profiling

    OpenAIRE

    Hladíková, Radka

    2010-01-01

    Title: Data Profiling Author: Radka Hladíková Department: Department of Software Engineering Supervisor: Ing. Vladimír Kyjonka Supervisor's e-mail address: Abstract: This thesis puts mind on problems with data quality and data profiling. This Work analyses and summarizes problems of data quality, data defects, process of data quality, data quality assessment and data profiling. The main topic is data profiling as a process of researching data available in existing...

  15. Karolinske psychodynamic profile (KAPP)

    DEFF Research Database (Denmark)

    Mathiesen, Birgit Bork; Søgaard, Ulf

    2006-01-01

    psykologiske testmetoder, assesment, Karolinska psychodynamic profile (KAPP), psykodynamisk profil......psykologiske testmetoder, assesment, Karolinska psychodynamic profile (KAPP), psykodynamisk profil...

  16. Perfil das condutas médicas que antecedem ao óbito de crianças em um hospital terciário A profile of the medical conduct preceding child death at a tertiary hospital

    Directory of Open Access Journals (Sweden)

    Henrique A.F. Tonelli

    2005-04-01

    Full Text Available OBJETIVO: estudar o perfil de assistência aos pacientes pediátricos que evoluem para o óbito em um hospital universitário, incluindo descrição dos modelos, comparações entre setores, associações de fatores, participações envolvidas e registro das decisões. MÉTODOS: estudo transversal observacional. Foram revistos por um dos autores os registros médicos e de enfermagem dos pacientes falecidos, tendo sido aplicados entrevistas e questionários aos membros da equipe assistente. O período do estudo foi de 12 meses (de 01º de maio de 2002 a 30 de abril de 2003. RESULTADOS: foram analisados 106 casos. Os modelos de assistência mais empregados no hospital foram não-oferta de suporte de vida (51,9% e reanimação malsucedida (44,3%. As decisões de não reanimar foram mais tardias no centro de tratamento intensivo (p OBJECTIVE: To study the profile of care provided to pediatric patients suffering fatal outcomes at a university hospital, including: description of models, comparisons between units, associated factors, participants involved and records of decisions made. METHODS: Cross-sectional study. One of the investigators reviewed the medical and nursing records of deceased patients. Interviews were held and questionnaires filled out with the care team members over a period of 12 months (May 1, 2002 to April 30, 2003. RESULTS: The study included 106 cases. The most frequent treatment patterns at the hospital were: withholding advanced life support (51.9% and unsuccessful cardiopulmonary resuscitation (44.3%. The decision to make a do-not-resuscitate order occurred later in the intensive care unit (p < 0.05. The restricted care category was more prevalent in the neonatal unit and among patients with chronic diseases that limit survival (p < 0.05. The professionals that most often participated in the decision-making process were the unit's treating physician and resident (52.8% and the medical team (31.1%. Parents or guardians were

  17. Neuropsychological assessment of a preteen with conduct disorder

    National Research Council Canada - National Science Library

    Acosta, María Rocío; Triana, Juliana; Chipatecua, Alexandra Gaitán; Fonseca, Luisa; Alonso, Diana

    2012-01-01

    .... These results are consistent with studies of patients with frontal lobe dysfunction in which females with conduct disorder present a neuropsychological profile with greater compromises in cognitive processes...

  18. Leadership Profiles.

    Science.gov (United States)

    Morgan, Robert M.; And Others

    1992-01-01

    Presents profiles of three leaders in the field of educational media and technology: Robert Mills Gagne, Florida State University; Robert Heinich, Indiana University; and Charles Francis Schuller, University of Georgia. (SLW)

  19. Profils d’apprentissage et représentations dans l’apprentissage des langues en environnement multimédia. Résultats d’une enquête en contexte universitaire. Learner profiles and attitudes in foreign language learning in a multimedia environment. Results of a survey conducted in a higher education context.

    Directory of Open Access Journals (Sweden)

    Joseph Rézeau

    1999-06-01

    Full Text Available Dans le domaine de l’apprentissage, les profils d’apprentissage et les représentations des apprenants jouent un rôle fondamental. La recherche exposée dans cet article met en évidence des différences sensibles de profil d’apprentissage des langues chez des étudiants spécialisés en langues d’une part et des étudiants d’autres disciplines d’autre part. Elle montre également que les représentations de l’apprentissage des langues et celles des Technologies de l’Information et de la Communication (TIC chez ces deux populations sont des représentations sociales, qui montrent un recouvrement entre les deux domaines étudiés. Enfin, une étude longitudinale d’un échantillon de la population étudiée montre que les profils d’apprentissage et les représentations sont susceptibles d’évolution. La question reste posée de l’influence de l’environnement multimédia d’apprentissage de la langue sur cette évolution constatée.In the field of learning, the learners’ attitudes and representations play a fundamental role. The research presented in this article shows significant differences in the language learning profiles of university students specialised in languages on the one hand and specialists of other disciplines on the other hand. Our research also shows that the representations of language learning and the representations of the Information and Communication Technologies (ICT held by the subjects in these two populations are social representations, showing overlap between the two domains studied. Finally, a longitudinal study of a sample of the population under review shows that both learners’ profiles and representations are open to evolution. The question remains of the influence exerted by the multimedia language learning environment over the said evolution.

  20. Profiling cancer

    DEFF Research Database (Denmark)

    Ciro, Marco; Bracken, Adrian P; Helin, Kristian

    2003-01-01

    In the past couple of years, several very exciting studies have demonstrated the enormous power of gene-expression profiling for cancer classification and prediction of patient survival. In addition to promising a more accurate classification of cancer and therefore better treatment of patients......, gene-expression profiling can result in the identification of novel potential targets for cancer therapy and a better understanding of the molecular mechanisms leading to cancer....

  1. Profiling cancer

    DEFF Research Database (Denmark)

    Ciro, Marco; Bracken, Adrian P; Helin, Kristian

    2003-01-01

    In the past couple of years, several very exciting studies have demonstrated the enormous power of gene-expression profiling for cancer classification and prediction of patient survival. In addition to promising a more accurate classification of cancer and therefore better treatment of patients......, gene-expression profiling can result in the identification of novel potential targets for cancer therapy and a better understanding of the molecular mechanisms leading to cancer....

  2. Optical conductivity of curved graphene.

    Science.gov (United States)

    Chaves, A J; Frederico, T; Oliveira, O; de Paula, W; Santos, M C

    2014-05-07

    We compute the optical conductivity for an out-of-plane deformation in graphene using an approach based on solutions of the Dirac equation in curved space. Different examples of periodic deformations along one direction translates into an enhancement of the optical conductivity peaks in the region of the far- and mid-infrared frequencies for periodicities ∼100 nm. The width and position of the peaks can be changed by dialling the parameters of the deformation profiles. The enhancement of the optical conductivity is due to intraband transitions and the translational invariance breaking in the geometrically deformed background. Furthermore, we derive an analytical solution of the Dirac equation in a curved space for a general deformation along one spatial direction. For this class of geometries, it is shown that curvature induces an extra phase in the electron wave function, which can also be explored to produce interference devices of the Aharonov-Bohm type.

  3. Profile summary.

    Science.gov (United States)

    2003-01-01

    All drugs appearing in the Adis Profile Summary table have been selected based on information contained in R&D Insight trade mark, a proprietary product of Adis International. The information in the profiles is gathered from the world's medical and scientific literature, at international conferences and symposia, and directly from the developing companies themselves. The emphasis of Drugs in R&D is on the clinical potential of new drugs, and selection of agents for inclusion is based on products in late-phase clinical development that have recently had a significant change in status.

  4. Multidimensional Heat Conduction

    DEFF Research Database (Denmark)

    Rode, Carsten

    1998-01-01

    Analytical theory of multidimensional heat conduction. General heat conduction equation in three dimensions. Steay state, analytical solutions. The Laplace equation. Method of separation of variables. Principle of superposition. Shape factors. Transient, multidimensional heat conduction....

  5. Conductivity Measurements of Silverpastes

    Directory of Open Access Journals (Sweden)

    M. Dirix

    2010-01-01

    Full Text Available The development of three-dimensional printed circuit boards requires research on new materials which can easily be deformed. Conducting pastes are well suited for deformation even after they are applied to the dielectric carrier. This paper deals with measurements of the electrical conductivity of these conducting pastes. Two different conductivity measurement techniques are explained and carried out. The resulting measurements give an overview of the conductivity of several measured samples.

  6. Constructing Data Curation Profiles

    Directory of Open Access Journals (Sweden)

    Michael Witt

    2009-12-01

    Full Text Available This paper presents a brief literature review and then introduces the methods, design, and construction of the Data Curation Profile, an instrument that can be used to provide detailed information on particular data forms that might be curated by an academic library. These data forms are presented in the context of the related sub-disciplinary research area, and they provide the flow of the research process from which these data are generated. The profiles also represent the needs for data curation from the perspective of the data producers, using their own language. As such, they support the exploration of data curation across different research domains in real and practical terms. With the sponsorship of the Institute of Museum and Library Services, investigators from Purdue University and the University of Illinois interviewed 19 faculty subjects to identify needs for discovery, access, preservation, and reuse of their research data. For each subject, a profile was constructed that includes information about his or her general research, data forms and stages, value of data, data ingest, intellectual property, organization and description of data, tools, interoperability, impact and prestige, data management, and preservation. Each profile also presents a specific dataset supplied by the subject to serve as a concrete example. The Data Curation Profiles are being published to a public wiki for questions and discussion, and a blank template will be disseminated with guidelines for others to create and share their own profiles. This study was conducted primarily from the viewpoint of librarians interacting with faculty researchers; however, it is expected that these findings will complement a wide variety of data curation research and practice outside of librarianship and the university environment.

  7. Conducting Polymeric Materials

    DEFF Research Database (Denmark)

    Hvilsted, Søren

    2016-01-01

    The overall objective of this collection is to provide the most recent developments within the various areas of conducting polymeric materials. The conductivity of polymeric materials is caused by electrically charged particles, ions, protons and electrons. Materials in which electrons...

  8. The Conductivity of Solutions.

    Science.gov (United States)

    Rayner-Canham, Geoff

    1993-01-01

    Presents historical background and modern explanations for the popular demonstration of showing conductivity of solutions through the insertion of a light-bulb conductivity tester into deionized water and water with salt in it. (PR)

  9. Limits of proton conductivity.

    Science.gov (United States)

    Kreuer, Klaus-Dieter; Wohlfarth, Andreas

    2012-10-15

    Parasitic current seems to be the cause for the "highest proton conductivity" of a material reported to date. Kreuer and Wohlfarth verify this hypothesis by measuring the conductivity of the same materials after preparing them in a different way. They further explain the limits of proton conductivity and comment on the problems of determining the conductivity of small objects (e.g., whiskers, see picture).

  10. MPI Profiling

    Energy Technology Data Exchange (ETDEWEB)

    Han, D K; Jones, T R

    2005-02-11

    The Message Passing Interface (MPI) is the de facto message-passing standard for massively parallel programs. It is often the case that application performance is a crucial factor, especially for solving grand challenge problems. While there have been many studies on the scalability of applications, there have not been many focusing on the specific types of MPI calls being made and their impact on application performance. Using a profiling tool called mpiP, a large spectrum of parallel scientific applications were surveyed and their performance results analyzed.

  11. Quantum profiles

    CERN Document Server

    Bernstein, Jeremy

    1991-01-01

    For the prominent science writer Jeremy Bernstein, the profile is the most congenial way of communicating science. Here, in what he labels a "series of conversations carried on in the reader's behalf and my own," he evokes the tremendous intellectual excitement of the world of modern physics, especially the quantum revolution. Drawing on his well-known talent for explaining the most complex scientific ideas for the layperson, Bernstein gives us a lively sense of what the issues of quantum mechanics are and of various ways in which individual physicists approached them.The author begins this se

  12. Conducting polymer materials

    Directory of Open Access Journals (Sweden)

    Jovanović Slobodan M.

    2003-01-01

    Full Text Available Conducting polymers represent a very interesting group of polymer materials Investigation of the synthesis, structure and properties of these materials has been the subject of considerable research efforts in the last twenty years. A short presentating of newer results obtained by investigating of the synthesis, structure and properties of two basic groups of conducting polymers: a conducting polymers the conductivity of which is the result of their molecular structure, and b conducting polymer composites (EPC, is given in this paper. The applications and future development of this group of polymer materials is also discussed.

  13. Conducted interference, challenges and interference cases

    NARCIS (Netherlands)

    Leferink, Frank Bernardus Johannes

    2015-01-01

    Conducted interference has become increasingly problematic in the past few years, especially within the 2-150 kHz band. The high penetration of non-linear loads, combined with distributed generation, will influence the voltage profile, i.e. the power quality. New technologies will introduce new type

  14. Conducted interference, challenges and interference cases

    NARCIS (Netherlands)

    Leferink, Frank Bernardus Johannes

    2015-01-01

    Conducted interference has become increasingly problematic in the past few years, especially within the 2-150 kHz band. The high penetration of non-linear loads, combined with distributed generation, will influence the voltage profile, i.e. the power quality. New technologies will introduce new

  15. Modeling Classical Heat Conduction in FLAG

    Energy Technology Data Exchange (ETDEWEB)

    Ramsey, Scott D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hendon, Raymond Cori [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-01-12

    The Los Alamos National Laboratory FLAG code contains both electron and ion heat conduction modules; these have been constructed to be directly relevant to user application problems. However, formal code verification of these modules requires quantitative comparison to exact solutions of the underlying mathematical models. A wide variety of exact solutions to the classical heat conduction equation are available for this purpose. This report summarizes efforts involving the representation of the classical heat conduction equation as following from the large electron-ion coupling limit of the electron and ion 3T temperature equations, subject to electron and ion conduction processes. In FLAG, this limiting behavior is quantitatively verified using a simple exact solution of the classical heat conduction equation. For this test problem, both heat conduction modules produce nearly identical spatial electron and ion temperature profiles that converge at slightly less than 2nd order to the corresponding exact solution.

  16. Voltammetry of conducting polymers

    OpenAIRE

    Gulaboski, Rubin

    2014-01-01

    The search for new materials for enhancing electrical conductivity of various materials is one of the most active research areas today. Conducting polymers represent a unique class of organic materials that have been used in many applications such as bioelectronics, sensors, corrosion protection, electrocatalysis, and energy storage devices. Application of the conductive polymers in electrochemistry is almost inevitable in order to get better features of the voltammetric systems ...

  17. New method for measuring the thermal conductivity.

    Science.gov (United States)

    Goldratt, E; Greenfield, A J

    1978-11-01

    A new experimental method is presented for measuring the thermal conductivity as a function of temperature. The basic innovation lies in extracting from the measured temperature profile of a sample in vacuo, the thermal conductivity of each individual cross-sectional sample element. The estimated experimental error is +/-1%. Not only is high accuracy achieved, but also a self-checking procedure offers the possibility of avoiding systematic errors. Measurements on two samples of type 304 stainless steel are presented. Three independent sets of measurements give consistent values for the thermal conductivity to well within the estimated error of +/-1%.

  18. Graphene Conductance Uniformity Mapping

    DEFF Research Database (Denmark)

    Buron, Jonas Christian Due; Petersen, Dirch Hjorth; Bøggild, Peter

    2012-01-01

    We demonstrate a combination of micro four-point probe (M4PP) and non-contact terahertz time-domain spectroscopy (THz-TDS) measurements for centimeter scale quantitative mapping of the sheet conductance of large area chemical vapor deposited graphene films. Dual configuration M4PP measurements......, demonstrated on graphene for the first time, provide valuable statistical insight into the influence of microscale defects on the conductance, while THz-TDS has potential as a fast, non-contact metrology method for mapping of the spatially averaged nanoscopic conductance on wafer-scale graphene with scan times......, dominating the microscale conductance of the investigated graphene film....

  19. Electrically conductive cellulose composite

    Science.gov (United States)

    Evans, Barbara R.; O'Neill, Hugh M.; Woodward, Jonathan

    2010-05-04

    An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

  20. Is Conductive Education Transplantable?

    Science.gov (United States)

    Bairstow, Phillip; Cochrane, Raymond

    1993-01-01

    This article highlights difficulties in replicating the Andras Peto Institute for Motor Disorders in Hungary by establishing the Birmingham (England) Institute for Conductive Education, for children with cerebral palsy. Difficulties included a lack of conductive education principles in clear English, failure to properly identify children who could…

  1. Conductive fabric seal

    Energy Technology Data Exchange (ETDEWEB)

    Livesay, Ronald Jason; Mason, Brandon William; Kuhn, Michael Joseph; Rowe, Nathan Carl

    2017-04-04

    Disclosed are several examples of a system and method for detecting if an article is being tampered with. Included is a covering made of a substrate that is coated with a layer of an electrically conductive material that forms an electrically conductive surface having an electrical resistance. The covering is configured to at least partially encapsulate the article such that the article cannot be tampered with, without modifying the electrical resistance of the electrically conductive surface of the covering. A sensing device is affixed to the electrically conductive surface of the covering and the sensing device monitors the condition of the covering by producing a signal that is indicative of the electrical resistance of the electrically conductive surface of the covering. A measured electrical resistance that differs from a nominal electrical resistance is indicative of a covering that is being tampered with and an alert is communicated to an observer.

  2. Laboratory-based electrical conductivity at Martian mantle conditions

    Science.gov (United States)

    Verhoeven, Olivier; Vacher, Pierre

    2016-12-01

    Information on temperature and composition of planetary mantles can be obtained from electrical conductivity profiles derived from induced magnetic field analysis. This requires a modeling of the conductivity for each mineral phase at conditions relevant to planetary interiors. Interpretation of iron-rich Martian mantle conductivity profile therefore requires a careful modeling of the conductivity of iron-bearing minerals. In this paper, we show that conduction mechanism called small polaron is the dominant conduction mechanism at temperature, water and iron content conditions relevant to Mars mantle. We then review the different measurements performed on mineral phases with various iron content. We show that, for all measurements of mineral conductivity reported so far, the effect of iron content on the activation energy governing the exponential decrease in the Arrhenius law can be modeled as the cubic square root of the iron content. We recast all laboratory results on a common generalized Arrhenius law for iron-bearing minerals, anchored on Earth's mantle values. We then use this modeling to compute a new synthetic profile of Martian mantle electrical conductivity. This new profile matches perfectly, in the depth range [100,1000] km, the electrical conductivity profile recently derived from the study of Mars Global Surveyor magnetic field measurements.

  3. Electrically Conducting Polymers.

    Science.gov (United States)

    1983-04-07

    polypyrrole, the oxidized polythiophene is also unstable in air. A rather different class of conducting polymers lies outside the scope of this review but...AD-A129 488 ELECTRICALLY CONDUCTING POLYNERS(U) IBM RESEARCH LAB / SAN JOSE CA W D GILL ET RL. 97 APR 83 TR-B UNCLASSIFIED F/G 7/3 N I Ihhhhhhhhhhhhl...00 Contract N00014-80-C-0779 Technical Report No. 8 *Electrically Conducting Polymers by W. D. Gill, T. C. Clarke, and G. B. Street Prepared for

  4. Conductive open frameworks

    Science.gov (United States)

    Yaghi, Omar M.; Wan, Shun; Doonan, Christian J.; Wang, Bo; Deng, Hexiang

    2016-02-23

    The disclosure relates generally to materials that comprise conductive covalent organic frameworks. The disclosure also relates to materials that are useful to store and separate gas molecules and sensors.

  5. Conductivities from attractors

    CERN Document Server

    Erdmenger, Johanna; Goulart, Prieslei; Witkowski, Piotr

    2016-01-01

    In the context of applications of the AdS/CFT correspondence to condensed matter physics, we compute conductivities for field theory duals of dyonic planar black holes in 3+1-dimensional Einstein-Maxwell-dilaton theories at zero temperature. We combine the near-horizon data obtained via Sen's entropy function formalism with known expressions for conductivities. In this way we express the conductivities in terms of the extremal black hole charges. We apply our approach to three different examples for dilaton theories for which the background geometry is not known explicitly. For a constant scalar potential, the thermal conductivity explicitly scales as $\\alpha_{xy}\\sim N^{3/2}$, as expected.

  6. Nerve conduction velocity

    Science.gov (United States)

    ... to measure the speed of the nerve signals. Electromyography (recording from needles placed into the muscles) is ... Often, the nerve conduction test is followed by electromyography (EMG). In this test, needles are placed into ...

  7. Dissecting holographic conductivities

    CERN Document Server

    Davison, Richard A

    2015-01-01

    The DC thermoelectric conductivities of holographic systems in which translational symmetry is broken can be efficiently computed in terms of the near-horizon data of the dual black hole. By calculating the frequency dependent conductivities to the first subleading order in the momentum relaxation rate, we give a physical explanation for these conductivities in the simplest such example, in the limit of slow momentum relaxation. Specifically, we decompose each conductivity into the sum of a coherent contribution due to momentum relaxation and an incoherent contribution, due to intrinsic current relaxation. This decomposition is different from those previously proposed, and is consistent with the known hydrodynamic properties in the translationally invariant limit. This is the first step towards constructing a consistent theory of charged hydrodynamics with slow momentum relaxation.

  8. Radiative magnetized thermal conduction fronts

    Science.gov (United States)

    Borkowski, Kazimierz J.; Balbus, Steven A.; Fristrom, Carl C.

    1990-01-01

    The evolution of plane-parallel magnetized thermal conduction fronts in the interstellar medium (ISM) was studied. Separating the coronal ISM phase and interstellar clouds, these fronts have been thought to be the site of the intermediate-temperature regions whose presence was inferred from O VI absorption-line studies. The front evolution was followed numerically, starting from the initial discontinuous temperature distribution between the hot and cold medium, and ending in the final cooling stage of the hot medium. It was found that, for the typical ISM pressure of 4000 K/cu cm and the hot medium temperature of 10 to the 6th K, the transition from evaporation to condensation in a nonmagnetized front occurs when the front thickness is 15 pc. This thickness is a factor of 5 smaller than previously estimated. The O VI column densities in both evaporative and condensation stages agree with observations if the initial hot medium temperature Th exceeds 750,000 K. Condensing conduction fronts give better agreement with observed O VI line profiles because of lower gas temperatures.

  9. Local measurement of thermal conductivity and diffusivity

    Energy Technology Data Exchange (ETDEWEB)

    Hurley, David H.; Schley, Robert S. [Materials Science and Engineering Department, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, Idaho 83415-2209 (United States); Khafizov, Marat [Mechanical and Aerospace Engineering Department, The Ohio State University, 201 W. 19th Ave., Columbus, Ohio 43210 (United States); Wendt, Brycen L. [Nuclear Science and Engineering, Idaho State University, 921 S. 8th Ave., Pocatello, Idaho 83209-8060 (United States)

    2015-12-15

    Simultaneous measurement of local thermal diffusivity and conductivity is demonstrated on a range of ceramic samples. This was accomplished by measuring the temperature field spatial profile of samples excited by an amplitude modulated continuous wave laser beam. A thin gold film is applied to the samples to ensure strong optical absorption and to establish a second boundary condition that introduces an expression containing the substrate thermal conductivity. The diffusivity and conductivity are obtained by comparing the measured phase profile of the temperature field to a continuum based model. A sensitivity analysis is used to identify the optimal film thickness for extracting the both substrate conductivity and diffusivity. Proof of principle studies were conducted on a range of samples having thermal properties that are representatives of current and advanced accident tolerant nuclear fuels. It is shown that by including the Kapitza resistance as an additional fitting parameter, the measured conductivity and diffusivity of all the samples considered agreed closely with the literature values. A distinguishing feature of this technique is that it does not require a priori knowledge of the optical spot size which greatly increases measurement reliability and reproducibility.

  10. Local measurement of thermal conductivity and diffusivity

    Science.gov (United States)

    Hurley, David H.; Schley, Robert S.; Khafizov, Marat; Wendt, Brycen L.

    2015-12-01

    Simultaneous measurement of local thermal diffusivity and conductivity is demonstrated on a range of ceramic samples. This was accomplished by measuring the temperature field spatial profile of samples excited by an amplitude modulated continuous wave laser beam. A thin gold film is applied to the samples to ensure strong optical absorption and to establish a second boundary condition that introduces an expression containing the substrate thermal conductivity. The diffusivity and conductivity are obtained by comparing the measured phase profile of the temperature field to a continuum based model. A sensitivity analysis is used to identify the optimal film thickness for extracting the both substrate conductivity and diffusivity. Proof of principle studies were conducted on a range of samples having thermal properties that are representatives of current and advanced accident tolerant nuclear fuels. It is shown that by including the Kapitza resistance as an additional fitting parameter, the measured conductivity and diffusivity of all the samples considered agreed closely with the literature values. A distinguishing feature of this technique is that it does not require a priori knowledge of the optical spot size which greatly increases measurement reliability and reproducibility.

  11. Character profiles and life satisfaction.

    Science.gov (United States)

    Park, Hwanjin; Suh, Byung Seong; Kim, Won Sool; Lee, Hye-Kyung; Park, Seon-Cheol; Lee, Kounseok

    2015-04-01

    There is a surge of interest in subjective well-being (SWB), which concerns how individuals feel about their happiness. Life satisfaction tends to be influenced by individual psychological traits and external social factors. The aim of this study was to examine the relationship between individual character and SWB. Data from 3522 university students were analyzed in this study. Character profiles were evaluated using the Temperament and Character Inventory-Revised Short version (TCI-RS). Life satisfaction was assessed using the Satisfaction with Life Scale (SWLS). All statistical tests regarding the correlations between each character profile and life satisfaction were conducted using ANOVAs, t-tests, multiple linear regression models and correlation analyses. The creative (SCT) profile was associated with the highest levels of life satisfaction, whereas the depressive (sct) profile was associated with the lowest levels of life satisfaction. Additionally, high self-directedness, self-transcendence and cooperation were associated with high life satisfaction. The results of gender-adjusted multiple regression analysis showed that the effects of self-directedness were the strongest in the assessment of one's quality of life, followed by self-transcendence and cooperativeness, in that order. All of the three-character profiles were significantly correlated with one's quality of life, and the character profiles of TCI-RS explained 27.6% of life satisfaction in total. Among the three-character profiles, the self-directedness profile was most associated with life satisfaction. Our study was cross-sectional, and self-reported data from students at a single university were analyzed. The results of this study showed that, among the character profiles, the effects of self-directedness were the strongest for predicting life satisfaction. Copyright © 2014 Elsevier Inc. All rights reserved.

  12. Nonequilibrium mesoscopic conductance fluctuations

    Science.gov (United States)

    Ludwig, T.; Blanter, Ya. M.; Mirlin, A. D.

    2004-12-01

    We investigate the amplitude of mesoscopic fluctuations of the differential conductance of a metallic wire at arbitrary bias voltage V . For noninteracting electrons, the variance ⟨δg2⟩ increases with V . The asymptotic large- V behavior is ⟨δg2⟩˜V/Vc (where eVc=D/L2 is the Thouless energy), in agreement with the earlier prediction by Larkin and Khmelnitskii. We find, however, that this asymptotics has a very small numerical prefactor and sets in at very large V/Vc only, which strongly complicates its experimental observation. This high-voltage behavior is preceded by a crossover regime, V/Vc≲30 , where the conductance variance increases by a factor ˜3 as compared to its value in the regime of universal conductance fluctuations (i.e., at V→0 ). We further analyze the effect of dephasing due to the electron-electron scattering on ⟨δg2⟩ at high voltages. With the Coulomb interaction taken into account, the amplitude of conductance fluctuations becomes a nonmonotonic function of V . Specifically, ⟨δg2⟩ drops as 1/V for voltages V≫gVc , where g is the dimensionless conductance. In this regime, the conductance fluctuations are dominated by quantum-coherent regions of the wire adjacent to the reservoirs.

  13. Proton conducting cerate ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Coffey, G.W.; Pederson, L.R.; Armstrong, T.R.; Bates, J.L.; Weber, W.J. [Pacific Northwest Lab., Richland, WA (United States)

    1995-08-01

    Cerate perovskites of the general formula AM{sub x}Ce{sub 1-x}O{sub 3-{delta}}, where A = Sr or Ba and where M = Gd, Nd, Y, Yb or other rare earth dopant, are known to conduct a protonic current. Such materials may be useful as the electrolyte in a solid oxide fuel cell operating at intermediate temperatures, as an electrochemical hydrogen separation membrane, or as a hydrogen sensor. Conduction mechanisms in these materials were evaluated using dc cyclic voltammetry and mass spectrometry, allowing currents and activation energies for proton, electron, and oxygen ion contributions to the total current to be determined. For SrYb{sub 0.05}Ce{sub 0.95}O{sub 3-{delta}}, one of the best and most environmentally stable compositions, proton conduction followed two different mechanisms: a low temperature process, characterized by an activation energy of 0.42{+-}0.04 eV, and a high temperature process, characterized by an activation energy of 1.38{+-}0.13 eV. It is believed that the low temperature process is dominated by grain boundary conduction while bulk conduction is responsible for the high temperature process. The activation energy for oxygen ion conduction (0.97{+-}0.10 eV) agrees well with other oxygen conductors, while that for electronic conduction, 0.90{+-}0.09 eV, is affected by a temperature-dependent electron carrier concentration. Evaluated by direct measurement of mass flux through a dense ceramic with an applied dc field, oxygen ions were determined to be the majority charge carrier except at the lowest temperatures, followed by electrons and then protons.

  14. Heat conduction. 3. ed.

    Energy Technology Data Exchange (ETDEWEB)

    Jiji, Latif M. [City Coll. of City Univ. of New York, NY (United States). Dept. of Mechanical Engineering

    2009-07-01

    This textbook presents the classical topics of conduction heat transfer and extends the coverage to include chapters on perturbation methods, heat transfer in living tissue, and microscale conduction. This makes the book unique among the many published textbook on conduction heat transfer. Other noteworthy features of the book are: The material is organized to provide students with the tools to model, analyze and solve a wide range of engineering applications involving conduction heat transfer. Mathematical techniques are presented in a clear and simplified fashion to be used as instruments in obtaining solutions. The simplicity of one-dimensional conduction is used to drill students in the role of boundary conditions and to explore a variety of physical conditions that are of practical interest. Examples are carefully selected to illustrate the application of principles and the construction of solutions. Students are trained to follow a systematic problem solving methodology with emphasis on thought process, logic, reasoning and verification. Solutions to all examples and end-of-chapter problems follow an orderly problems solving approach. (orig.)

  15. Diagnose Test-Taker's Profile in Terms of Core Profile Patterns: Principal Component (PC) vs. Profile Analysis via MDS (PAMS) Approaches.

    Science.gov (United States)

    Kim, Se-Kang; Davison, Mark L.

    A study was conducted to examine how principal components analysis (PCA) and Profile Analysis via Multidimensional Scaling (PAMS) can be used to diagnose individuals observed score profiles in terms of core profile patterns identified by each method. The standardization sample from the Wechsler Intelligence Scale for Children, Third Edition…

  16. Conducting everyday life

    DEFF Research Database (Denmark)

    Juhl, Pernille

    In the paper I discuss how small children (0-4 year) develop through ‘conducting everyday life’ across contexts (Holzkamp 2013). I discuss how this process of conducting everyday life is essential when discussing the ‘good life for children’ from a child perspective. These issues are addressed...... by using materials from my ongoing Ph.D. project which is based on cultural-historical research traditions and critical psychological conceptualizations. The project is a qualitative study of 6 children, who for various reasons are defined as being children-at-risk. Due to concerns about their development......, they are involved in preventive interventions. I conducted participatory observations with the children in their everyday life. Overall, the study stresses that even small children must be perceived as active participants who act upon and struggle with different conditions and meaning making processes across...

  17. Conducting everyday life

    DEFF Research Database (Denmark)

    Juhl, Pernille

    In the paper I discuss how small children (0-4 year) develop through ‘conducting everyday life’ across contexts (Holzkamp 2013). I discuss how this process of conducting everyday life is essential when discussing the ‘good life for children’ from a child perspective. These issues are addressed......, they are involved in preventive interventions. I conducted participatory observations with the children in their everyday life. Overall, the study stresses that even small children must be perceived as active participants who act upon and struggle with different conditions and meaning making processes across...... by using materials from my ongoing Ph.D. project which is based on cultural-historical research traditions and critical psychological conceptualizations. The project is a qualitative study of 6 children, who for various reasons are defined as being children-at-risk. Due to concerns about their development...

  18. Low thermal conductivity oxides

    Energy Technology Data Exchange (ETDEWEB)

    Pan, Wei; Phillpot, Simon R.; Wan, Chunlei; Chernatynskiy, Aleksandr; Qu, Zhixue

    2012-10-09

    Oxides hold great promise as new and improved materials for thermal-barrier coating applications. The rich variety of structures and compositions of the materials in this class, and the ease with which they can be doped, allow the exploration of various mechanisms for lowering thermal conductivity. In this article, we review recent progress in identifying specific oxides with low thermal conductivity from both theoretical and experimental perspectives. We explore the mechanisms of lowering thermal conductivity, such as introducing structural/chemical disorder, increasing material density, increasing the number of atoms in the primitive cell, and exploiting the structural anisotropy. We conclude that further systematic exploration of oxide crystal structures and chemistries are likely to result in even further improved thermal-barrier coatings.

  19. Responsible conduct of research

    CERN Document Server

    Shamoo, Adil E

    2015-01-01

    Since the early 2000s, the field of Responsible Conduct of Research has become widely recognized as essential to scientific education, investigation, and training. At present, research institutions with public funding are expected to have some minimal training and education in RCR for their graduate students, fellows and trainees. These institutions also are expected to have a system in place for investigating and reporting misconduct in research or violations of regulations in research with human subjects, or in their applications to federal agencies for funding. Public scrutiny of the conduct of scientific researchers remains high. Media reports of misconduct scandals, biased research, violations of human research ethics rules, and moral controversies in research occur on a weekly basis. Since the 2009 publication of the 2nd edition of Shamoo and Resnik's Responsible Conduct of Research, there has been a vast expansion in the information, knowledge, methods, and diagnosis of problems related to RCR and the ...

  20. Electrical Conductivity in Textiles

    Science.gov (United States)

    2006-01-01

    Copper is the most widely used electrical conductor. Like most metals, though, it has several drawbacks: it is heavy, expensive, and can break. Fibers that conduct electricity could be the solutions to these problems, and they are of great interest to NASA. Conductive fibers provide lightweight alternatives to heavy copper wiring in a variety of settings, including aerospace, where weight is always a chief concern. This is an area where NASA is always seeking improved materials. The fibers are also more cost-effective than metals. Expenditure is another area where NASA is always looking to make improvements. In the case of electronics that are confined to small spaces and subject to severe stress, copper is prone to breaking and losing connection over time. Flexible conductive fibers eliminate that problem. They are more supple and stronger than brittle copper and, thus, find good use in these and similar situations. While clearly a much-needed material, electrically conductive fibers are not readily available. The cost of new technology development, with all the pitfalls of troubleshooting production and the years of testing, and without the guarantee of an immediate market, is often too much of a financial hazard for companies to risk. NASA, however, saw the need for electrical fibers in its many projects and sought out a high-tech textile company that was already experimenting in this field, Syscom Technology, Inc., of Columbus, Ohio. Syscom was founded in 1993 to provide computer software engineering services and basic materials research in the areas of high-performance polymer fibers and films. In 1999, Syscom decided to focus its business and technical efforts on development of high-strength, high-performance, and electrically conductive polymer fibers. The company developed AmberStrand, an electrically conductive, low-weight, strong-yet-flexible hybrid metal-polymer YARN.

  1. Chiral conducting polymers.

    Science.gov (United States)

    Kane-Maguire, Leon A P; Wallace, Gordon G

    2010-07-01

    This critical review describes the preparation and properties of a relatively new class of chiral macromolecules, namely chiral conducting polymers. It focuses in particular on examples based on polypyrrole, polythiophene and polyaniline. They possess remarkable properties, combining not only chirality with electrical conductivity but also the ability to undergo facile redox and pH switching. These unique properties have opened up a range of exciting new potential applications, including as chiral sensors, as novel stationary phases for chiral separations, and as chiral electrodes for electrochemical asymmetric synthesis (153 references).

  2. Natures of Conduct

    DEFF Research Database (Denmark)

    Sielemann, Rasmus Basse

    Natures of Conduct explores the rationalities, practices and techniques of government processes in the Danish West Indies in the period between the late eighteenth century to the end of Danish colonial rule in 1917. In doing so, it engages Michel Foucault’s concepts of governmentality and the ‘di......Natures of Conduct explores the rationalities, practices and techniques of government processes in the Danish West Indies in the period between the late eighteenth century to the end of Danish colonial rule in 1917. In doing so, it engages Michel Foucault’s concepts of governmentality...

  3. COMPENDEX Profiling Guide.

    Science.gov (United States)

    Standera, Oldrich

    This manual provides instructions for completing the COMPENDEX (Computerized Engineering Index) Profile Submission Form used to prepare Current Information Selection (CIS) profiles. An annotated bibliography lists nine items useful in searching for proper profile words. (AB)

  4. Conductive thermal modeling of Wyoming geothermal systems

    Energy Technology Data Exchange (ETDEWEB)

    Heasler, H.P.; Ruscetta, C.A.; Foley, D. (eds.)

    1981-05-01

    A summary of techniques used by the Wyoming Geothermal Resource Assessment Group in defining low-temperature hydrothermal resource areas is presented. Emphasis is placed on thermal modeling techniques appropriate to Wyoming's geologic setting. Thermal parameters discussed include oil-well bottom hole temperatures, heat flow, thermal conductivity, and measured temperature-depth profiles. Examples of the use of these techniques are from the regional study of the Bighorn Basin and two site specific studies within the Basin.

  5. Conducting Social Experiments.

    Science.gov (United States)

    Boruch, Robert F.

    1987-01-01

    It is difficult to conduct randomized field experiments. In the past decade, the use of alternative randomization plans and incentives has contributed to their operational feasibility; legal, ethical, and professional arguments for experimentation have matured; and expectations have become better aligned with practical constraints that are likely…

  6. Conducting Educational Design Research

    Science.gov (United States)

    McKenney, Susan; Reeves, Thomas

    2012-01-01

    Educational design research blends scientific investigation with systematic development and implementation of solutions to educational problems. Empirical investigation is conducted in real learning settings--not laboratories--to craft usable and effective solutions. At the same time, the research is carefully structured to produce theoretical…

  7. New code of conduct

    CERN Multimedia

    Laëtitia Pedroso

    2010-01-01

    During his talk to the staff at the beginning of the year, the Director-General mentioned that a new code of conduct was being drawn up. What exactly is it and what is its purpose? Anne-Sylvie Catherin, Head of the Human Resources (HR) Department, talked to us about the whys and wherefores of the project.   Drawing by Georges Boixader from the cartoon strip “The World of Particles” by Brian Southworth. A code of conduct is a general framework laying down the behaviour expected of all members of an organisation's personnel. “CERN is one of the very few international organisations that don’t yet have one", explains Anne-Sylvie Catherin. “We have been thinking about introducing a code of conduct for a long time but lacked the necessary resources until now”. The call for a code of conduct has come from different sources within the Laboratory. “The Equal Opportunities Advisory Panel (read also the "Equal opportuni...

  8. High Thermal Conductivity Materials

    CERN Document Server

    Shinde, Subhash L

    2006-01-01

    Thermal management has become a ‘hot’ field in recent years due to a need to obtain high performance levels in many devices used in such diverse areas as space science, mainframe and desktop computers, optoelectronics and even Formula One racing cars! Thermal solutions require not just taking care of very high thermal flux, but also ‘hot spots’, where the flux densities can exceed 200 W/cm2. High thermal conductivity materials play an important role in addressing thermal management issues. This volume provides readers a basic understanding of the thermal conduction mechanisms in these materials and discusses how the thermal conductivity may be related to their crystal structures as well as microstructures developed as a result of their processing history. The techniques for accurate measurement of these properties on large as well as small scales have been reviewed. Detailed information on the thermal conductivity of diverse materials including aluminum nitride (AlN), silicon carbide (SiC), diamond, a...

  9. Transient Heat Conduction

    DEFF Research Database (Denmark)

    Rode, Carsten

    1998-01-01

    Analytical theory of transient heat conduction.Fourier's law. General heat conducation equation. Thermal diffusivity. Biot and Fourier numbers. Lumped analysis and time constant. Semi-infinite body: fixed surface temperature, convective heat transfer at the surface, or constant surface heat flux...

  10. Conducting Educational Design Research

    Science.gov (United States)

    McKenney, Susan; Reeves, Thomas

    2012-01-01

    Educational design research blends scientific investigation with systematic development and implementation of solutions to educational problems. Empirical investigation is conducted in real learning settings--not laboratories--to craft usable and effective solutions. At the same time, the research is carefully structured to produce theoretical…

  11. Conducting metal dithiolate complexes

    DEFF Research Database (Denmark)

    Underhill, A. E.; Ahmad, M. M.; Turner, D. J.;

    1985-01-01

    Further work on the chemical composition of the one-dimensional metallic metal dithiolene complex Li-Pt(mnt) is reported. The electrical conduction and thermopower properties of the nickel and palladium complexes are reported and compared with those of the platinum compound...

  12. Conductance eigenchannels in nanocontacts

    DEFF Research Database (Denmark)

    Brandbyge, Mads; Sørensen, Mads Reinholdt; Jacobsen, Karsten Wedel

    1997-01-01

    The electronic conductance of metal nanocontacts is analyzed in terms of eigenchannels for the transmission. The transmission through individual eigenchannels is calculated numerically for realistic models of gold point contacts based on molecular-dynamics simulation of the elongation of a contac...

  13. Conductive Education Perspectives.

    Science.gov (United States)

    Spivack, Frieda

    1995-01-01

    This article describes conductive education for children with neuromotor disabilities and identifies its major concepts, including orthofunction, rhythmic intention, and verbal regulation. Also addressed are the role of the conductor and the group and the training of conductors at the Peto Institute in Hungary. Research on the method's…

  14. Nanostructured conductive polymeric materials

    Science.gov (United States)

    Al-Saleh, Mohammed H.

    Conductive polymer composites (CPCs) are a suitable alternative to metals in many applications due to their light-weight, corrosion resistance, low cost, ease of processing and design flexibility. CPCs have been formulated using different types of conductive fillers. In this PhD thesis, the focus is on CPCs for electrostatic discharge (ESD) protection and electromagnetic interference (EMI) attenuation. Despite the versatility of conductive fillers, carbon black (CB) has been the dominant filler to make CPCs for ESD protection applications because CB/polymer composites have a cost advantage over all other CPCs. For EMI shielding, stainless steel fibres and metal coated fibers are the preferred fillers, however CPCs made of those fibers are not the dominant EMI shielding materials. Metal coated and polymer plated polymers are the most widely used EMI shielding options. The limited use of CPCs in the EMI shielding market is because the high filler loading required to formulate a composite with an adequate level of shielding remarkably increases the composite price. In order to increase the competitiveness of CPCs, percolation threshold should be minimized as much as possible and composites with high EMI shielding capabilities at low filler loading should be formulated because all conductive fillers are expensive compared to polymers. In this thesis, two different methodologies to reduce percolation threshold in CPCs have been successfully developed and a CPC with exceptional EMI shielding capability has been formulated using copper nanowires as conductive filler. The first percolation threshold reduction technique is based on the selective localization of CB at the interface of immiscible polymer blend. The technique requires adding a copolymer that prefers the blend's interface and for which CB nanoparticles has the highest affinity. The second method is based on producing a CPC powder and then using this powder as a conductive filler to produce composite by dry

  15. 'Stuffed' conducting polymers

    DEFF Research Database (Denmark)

    Winther-Jensen, Bjørn; Chen, Jun; West, Keld

    2005-01-01

    Conducting polymers (CP) obtained by oxidative polymerization using iron(III) salts shrink when Fe(II) and the excess counter ions are washed out after polymerization. This phenomenon can be used to incorporate active molecules into the CP matrix via their addition to the wash liquid. In the pres......Conducting polymers (CP) obtained by oxidative polymerization using iron(III) salts shrink when Fe(II) and the excess counter ions are washed out after polymerization. This phenomenon can be used to incorporate active molecules into the CP matrix via their addition to the wash liquid....... In the present work we demonstrate this principle on three different CP's: polypyrrole (PPy), poly-terthiophene (PTTh) and poly(3,4-ethylenedioxy thiophene) (PEDT), using ferrocene as a model molecule to be trapped in the polymer films. (c) 2005 Elsevier Ltd. All rights reserved....

  16. Conducting Polymer Based Nanobiosensors

    Directory of Open Access Journals (Sweden)

    Chul Soon Park

    2016-06-01

    Full Text Available In recent years, conducting polymer (CP nanomaterials have been used in a variety of fields, such as in energy, environmental, and biomedical applications, owing to their outstanding chemical and physical properties compared to conventional metal materials. In particular, nanobiosensors based on CP nanomaterials exhibit excellent performance sensing target molecules. The performance of CP nanobiosensors varies based on their size, shape, conductivity, and morphology, among other characteristics. Therefore, in this review, we provide an overview of the techniques commonly used to fabricate novel CP nanomaterials and their biosensor applications, including aptasensors, field-effect transistor (FET biosensors, human sense mimicking biosensors, and immunoassays. We also discuss prospects for state-of-the-art nanobiosensors using CP nanomaterials by focusing on strategies to overcome the current limitations.

  17. Highly Thermal Conductive Nanocomposites

    Science.gov (United States)

    Sun, Ya-Ping (Inventor); Connell, John W. (Inventor); Veca, Lucia Monica (Inventor)

    2015-01-01

    Disclosed are methods for forming carbon-based fillers as may be utilized in forming highly thermal conductive nanocomposite materials. Formation methods include treatment of an expanded graphite with an alcohol/water mixture followed by further exfoliation of the graphite to form extremely thin carbon nanosheets that are on the order of between about 2 and about 10 nanometers in thickness. Disclosed carbon nanosheets can be functionalized and/or can be incorporated in nanocomposites with extremely high thermal conductivities. Disclosed methods and materials can prove highly valuable in many technological applications including, for instance, in formation of heat management materials for protective clothing and as may be useful in space exploration or in others that require efficient yet light-weight and flexible thermal management solutions.

  18. Phoenix Conductivity Probe

    Science.gov (United States)

    2008-01-01

    This image taken by the Surface Stereo Imager on Sol 49, or the 49th Martian day of the mission (July 14, 2008), shows thermal and electrical conductivity probe on NASA's Phoenix Mars Lander's Robotic Arm. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is led by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  19. Conducting Thermoset Polymers.

    Science.gov (United States)

    2007-11-02

    polymers conducting. The acetylene-terminated Schiff base and acetylene-terminated polythiophene monomers were first cured, then doped with iodine... Schiff base thermoset was implanted with high energy argon ions using a commercial ion implanter. Electron spin resonance, photoluminescence, and...photoabsorption data suggest that polarons can form in the doped and undoped forms of the acetylene-terminated Schiff base and polythiophene thermoset

  20. Thermally conductive polymers

    Science.gov (United States)

    Byrd, N. R.; Jenkins, R. K.; Lister, J. L. (Inventor)

    1971-01-01

    A thermally conductive polymer is provided having physical and chemical properties suited to use as a medium for potting electrical components. The polymer is prepared from hydroquinone, phenol, and formaldehyde, by conventional procedures employed for the preparation of phenol-formaldehyde resins. While the proportions of the monomers can be varied, a preferred polymer is formed from the monomers in a 1:1:2.4 molar or ratio of hydroquinone:phenol:formaldehyde.

  1. STUDIES ON ENHANCED CONDUCTIVITY OF STRETCHED CONDUCTING POLYMERS

    Institute of Scientific and Technical Information of China (English)

    WAN Meixiang

    1995-01-01

    A physical model of series of the conductivity on chain and the interchain conductivity between chains is proposed to explain enhanced conductivity of stretched conducting polymers.This model suggests that the enhanced conductivity for stretched conducting polymers might be due to increasing of the interchain conductivity between chains along the elongation direction after drawing processes if the conductivity on chain is assumed much larger than that of the interchain conductivity between chains. According to this model, it is expected that the temperature dependence of conductivity measured by four-probe method for stretched conducting polymers is controlled by a variation of the interchain conductivity between chains with temperature, which can be used to explain that a metallic temperature dependence of conductivity for stretched conducting polymers is not observed although the conductivity along the elongation direction is enhanced by two or three orders of magnitude.

  2. Conductive dense hydrogen.

    Science.gov (United States)

    Eremets, M I; Troyan, I A

    2011-11-13

    Molecular hydrogen is expected to exhibit metallic properties under megabar pressures. This metal is predicted to be superconducting with a very high critical temperature, T(c), of 200-400 K, and it may acquire a new quantum state as a metallic superfluid and a superconducting superfluid. It may potentially be recovered metastably at ambient pressures. However, experiments carried out at low temperatures, Thydrogen remains in the molecular insulating state. Here we report on the transformation of normal molecular hydrogen at room temperature (295 K) to a conductive and metallic state. At 200 GPa the Raman frequency of the molecular vibron strongly decreased and the spectral width increased, evidencing a strong interaction between molecules. Deuterium behaved similarly. Above 220 GPa, hydrogen became opaque and electrically conductive. At 260-270 GPa, hydrogen transformed into a metal as the conductance of hydrogen sharply increased and changed little on further pressurizing up to 300 GPa or cooling to at least 30 K; and the sample reflected light well. The metallic phase transformed back at 295 K into molecular hydrogen at 200 GPa. This significant hysteresis indicates that the transformation of molecular hydrogen into a metal is accompanied by a first-order structural transition presumably into a monatomic liquid state. Our findings open an avenue for detailed and comprehensive studies of metallic hydrogen.

  3. Conduction heat transfer solutions

    Energy Technology Data Exchange (ETDEWEB)

    VanSant, J.H.

    1983-08-01

    This text is a collection of solutions to a variety of heat conduction problems found in numerous publications, such as textbooks, handbooks, journals, reports, etc. Its purpose is to assemble these solutions into one source that can facilitate the search for a particular problem solution. Generally, it is intended to be a handbook on the subject of heat conduction. There are twelve sections of solutions which correspond with the class of problems found in each. Geometry, state, boundary conditions, and other categories are used to classify the problems. Each problem is concisely described by geometry and condition statements, and many times a descriptive sketch is also included. The introduction presents a synopsis on the theory, differential equations, and boundary conditions for conduction heat transfer. Some discussion is given on the use and interpretation of solutions. Supplementary data such as mathematical functions, convection correlations, and thermal properties are included for aiding the user in computing numerical values from the solutions. 155 figs., 92 refs., 9 tabs.

  4. Robust mixed conducting membrane structure

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention provides a membrane structure, comprising in said order a first electronically conducting layer, an ionically conducting layer, and a second electronically conducting layer, characterized in that the first and second electronically conducting layers are internally short circ...

  5. Applicability of cable theory to vascular conducted responses

    DEFF Research Database (Denmark)

    Hald, Bjørn Olav; Jensen, Lars Jørn; Sørensen, Preben Graae

    2012-01-01

    ¿ adequately describes simulated conduction profiles. We find that several important cable theory assumptions are violated when applied to small blood vessels. However, the phenomenological use of a length-constant from a single exponential function is a good measure of conduction length. Hence, ¿ should...

  6. Inter-hemispheric asymmetry of Pedersen conductance

    Science.gov (United States)

    Deng, Y.; Lu, Y.; Sheng, C.; Yue, X.

    2015-12-01

    Ionospheric conductance is very important to the magnetosphere-ionosphere coupling in the high latitude region, since it connects the polar cap potential with the currents. Meanwhile, the altitudinal distribution of Pederson conductance gives us a rough idea about the altitudinal distribution of Joule heating at high latitudes. Based on the Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC) satellites observations of electron density profiles from 2009-2014, Pedersen conductivity has been calculated. A climatologic study of the height-integrated Pedersen conductivities in both E (100-150 km) and F (150-600 km) regions and their ratio in different seasons, solar and geomagnetic conditions have been conducted. A significant inter-hemispheric asymmetry is identified in the seasonal variation. Meanwhile, the conductance in both regions and the conductance ratio show a strong dependence on F10.7 and Ap indices. This result will strongly help our understanding of the inter-hemispheric difference in the high-latitude electrodynamics.

  7. CONDUCTIVITY, OXYGEN - PERCENT SATURATION, TEMPERATURE, turbidity and other profile data collected in the North Atlantic Ocean on the ENDEAVOR and OCEANUS cruises EN307, EN330 and others as part of the GB project from 1997-10-09 to 1999-12-12 (NODC Accession 0104391)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0104391 includes profile, biological, chemical and physical data collected aboard the ENDEAVOR and OCEANUS during cruises EN307, EN330, EN331, OC332...

  8. CONDUCTIVITY, SALINITY, SIGMA-THETA, WATER TEMPERATURE and other profile data collected in the Gulf of Alaska on the PANDALUS cruises PA0101, PA0102 and others as part of the NEP project from 2001-07-08 to 2004-09-17 (NODC Accession 0115201)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0115201 includes profile, biological, chemical and physical data collected aboard the PANDALUS during cruises PA0101, PA0102, PA0103, PA0104, PA0201,...

  9. SALINITY, CONDUCTIVITY, TEMPERATURE, FLUORESCENCE and other profile data collected in the Gulf of St. Lawrence and North Atlantic Ocean on NOAA Ship ALBATROSS IV, ENDEAVOR and other platforms cruises AL9404, AL9505 and others as part of the GB project from 1994-06-01 to 1999-06-23 (NODC Accession 0104400)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0104400 includes profile, discretely sampled, biological, chemical and physical data collected aboard NOAA Ship ALBATROSS IV, ENDEAVOR, OCEANUS and...

  10. SALINITY, CONDUCTIVITY, HYDROSTATIC PRESSURE, TEMPERATURE and FLUORESCENCE profile data collected in the North Atlantic Ocean on NOAA Ship ALBATROSS IV, ENDEAVOR and OCEANUS cruises AL9505, AL9506 and others as part of the GB project from 1995-02-11 to 1996-06-11 (NODC Accession 0104387)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0104387 includes profile, discretely sampled, biological, physical and chemical data collected aboard NOAA Ship ALBATROSS IV, ENDEAVOR and OCEANUS...

  11. Thermal contact conductance

    CERN Document Server

    Madhusudana, Chakravarti V

    2013-01-01

    The work covers both theoretical and practical aspects of thermal contact conductance. The theoretical discussion focuses on heat transfer through spots, joints, and surfaces, as well as the role of interstitial materials (both planned and inadvertent). The practical discussion includes formulae and data that can be used in designing heat-transfer equipment for a variety of joints, including special geometries and configurations. All of the material has been updated to reflect the latest advances in the field.

  12. Electrically Conductive Porous Membrane

    Science.gov (United States)

    Burke, Kenneth Alan (Inventor)

    2014-01-01

    The present invention relates to an electrically conductive membrane that can be configured to be used in fuel cell systems to act as a hydrophilic water separator internal to the fuel cell, or as a water separator used with water vapor fed electrolysis cells, or as a water separator used with water vapor fed electrolysis cells, or as a capillary structure in a thin head pipe evaporator, or as a hydrophobic gas diffusion layer covering the fuel cell electrode surface in a fuel cell.

  13. Conductive dense hydrogen

    Science.gov (United States)

    Eremets, M.; Troyan, I.

    2012-12-01

    Hydrogen at ambient pressures and low temperatures forms a molecular crystal which is expected to display metallic properties under megabar pressures. This metal is predicted to be superconducting with a very high critical temperature Tc of 200-400 K. The superconductor may potentially be recovered metastably at ambient pressures, and it may acquire a new quantum state as a metallic superfluid and a superconducting superfluid. Recent experiments performed at low temperatures T 220 GPa, new Raman modes arose, providing evidence for the transformation to a new opaque and electrically conductive phase IV. Above 260 GPa, in the next phase V, hydrogen reflected light well. Its resistance was nearly temperature-independent over a wide temperature range, down to 30 K, indicating that the hydrogen was metallic. Releasing the pressure induced the metallic phase to transform directly into molecular hydrogen with significant hysteresis at 200 GPa and 295 K. These data were published in our paper: M. I. Eremets and I. A. Troyan "Conductive dense hydrogen." Nature Materials 10: 927-931. We will present also new results on hydrogen: phase diagram with phases IV and V determined in P,T domain up to 300 GPa and 350 K. We will also discuss possible structures of phase IV based on our Raman and infrared measurements up to 300 GPa.

  14. Radiative thermal conduction fronts

    Science.gov (United States)

    Borkowski, Kazimierz J.; Balbus, Steven A.; Fristrom, Carl C.

    1990-01-01

    The discovery of the O VI interstellar absorption lines in our Galaxy by the Copernicus observatory was a turning point in our understanding of the Interstellar Medium (ISM). It implied the presence of widespread hot (approx. 10 to the 6th power K) gas in disk galaxies. The detection of highly ionized species in quasi-stellar objects' absorption spectra may be the first indirect observation of this hot phase in external disk galaxies. Previous efforts to understand extensive O VI absorption line data from our Galaxy were not very successful in locating the regions where this absorption originates. The location at interfaces between evaporating ISM clouds and hot gas was favored, but recent studies of steady-state conduction fronts in spherical clouds by Ballet, Arnaud, and Rothenflug (1986) and Bohringer and Hartquist (1987) rejected evaporative fronts as the absorption sites. Researchers report here on time-dependent nonequilibrium calculations of planar conductive fronts whose properties match well with observations, and suggest reasons for the difference between the researchers' results and the above. They included magnetic fields in additional models, not reported here, and the conclusions are not affected by their presence.

  15. Conductivity map from scanning tunneling potentiometry

    Science.gov (United States)

    Zhang, Hao; Li, Xianqi; Chen, Yunmei; Durand, Corentin; Li, An-Ping; Zhang, X.-G.

    2016-08-01

    We present a novel method for extracting two-dimensional (2D) conductivity profiles from large electrochemical potential datasets acquired by scanning tunneling potentiometry of a 2D conductor. The method consists of a data preprocessing procedure to reduce/eliminate noise and a numerical conductivity reconstruction. The preprocessing procedure employs an inverse consistent image registration method to align the forward and backward scans of the same line for each image line followed by a total variation (TV) based image restoration method to obtain a (nearly) noise-free potential from the aligned scans. The preprocessed potential is then used for numerical conductivity reconstruction, based on a TV model solved by accelerated alternating direction method of multiplier. The method is demonstrated on a measurement of the grain boundary of a monolayer graphene, yielding a nearly 10:1 ratio for the grain boundary resistivity over bulk resistivity.

  16. Conductivity map from scanning tunneling potentiometry.

    Science.gov (United States)

    Zhang, Hao; Li, Xianqi; Chen, Yunmei; Durand, Corentin; Li, An-Ping; Zhang, X-G

    2016-08-01

    We present a novel method for extracting two-dimensional (2D) conductivity profiles from large electrochemical potential datasets acquired by scanning tunneling potentiometry of a 2D conductor. The method consists of a data preprocessing procedure to reduce/eliminate noise and a numerical conductivity reconstruction. The preprocessing procedure employs an inverse consistent image registration method to align the forward and backward scans of the same line for each image line followed by a total variation (TV) based image restoration method to obtain a (nearly) noise-free potential from the aligned scans. The preprocessed potential is then used for numerical conductivity reconstruction, based on a TV model solved by accelerated alternating direction method of multiplier. The method is demonstrated on a measurement of the grain boundary of a monolayer graphene, yielding a nearly 10:1 ratio for the grain boundary resistivity over bulk resistivity.

  17. Robust mixed conducting membrane structure

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention provides a membrane structure, comprising in said order a first electronically conducting layer, an ionically conducting layer, and a second electronically conducting layer, characterized in that the first and second electronically conducting layers are internally short...... circuited. The present invention further provides a method of producing the above membrane structure, comprising the steps of : providing a ionically conducting layer; applying at least one layer of electronically conducting material on each side of said ionically conducting layer; sintering the multilayer...

  18. Ion-conducting membranes

    Energy Technology Data Exchange (ETDEWEB)

    Masel, Richard L.; Chen, Qingmei; Liu, Zengcai; Kutz, Robert

    2016-06-21

    An ion conducting polymeric composition mixture comprises a copolymer of styrene and vinylbenzyl-R.sub.s. R.sub.s is selected from the group consisting of imidazoliums and pyridiniums. The composition contains 10%-90% by weight of vinylbenzyl-R.sub.s. The composition can further comprise a polyolefin comprising substituted polyolefins, a polymer comprising cyclic amine groups, a polymer comprising at least one of a phenylene group and a phenyl group, a polyamide, and/or the reaction product of a constituent having two carbon-carbon double bonds. The composition can be in the form of a membrane. In a preferred embodiment, the membrane is a Helper Membrane that increases the faradaic efficiency of an electrochemical cell into which the membrane is incorporated, and also allows product formation at lower voltages than in cells without the Helper Membrane.

  19. Ion-conducting membranes

    Energy Technology Data Exchange (ETDEWEB)

    Masel, Richard I.; Chen, Qingmei; Liu, Zengcai; Kutz, Robert

    2017-02-28

    An ion conducting polymeric composition mixture comprises a copolymer of styrene and vinylbenzyl-R.sub.s. R.sub.s is selected from the group consisting of imidazoliums, pyridiniums, pyrazoliums, pyrrolidiniums, pyrroliums, pyrimidiums, piperidiniums, indoliums, and triaziniums. The composition contains 10%-90% by weight of vinylbenzyl-R.sub.s. The composition can further comprise a polyolefin comprising substituted polyolefins, a polymer comprising cyclic amine groups, a polymer comprising at least one of a phenylene group and a phenyl group, a polyamide, and/or the reaction product of a constituent having two carbon-carbon double bonds. The composition can be in the form of a membrane. In a preferred embodiment, the membrane is a Helper Membrane that increases the faradaic efficiency of an electrochemical cell into which the membrane is incorporated, and also allows product formation at lower voltages than in cells without the Helper Membrane.

  20. [Female conduct disorders].

    Science.gov (United States)

    Vloet, Timo D; Großheinrich, Nicola; Konrad, Kerstin; Freitag, Christine; Herpertz-Dahlmann, Beate

    2014-03-01

    The last few years have seen much research on girls with conduct disorder (CD). This article summarizes the gender-specific data regarding prevalence, differences with respect to symptomatology (e.g., subtypes of aggression, callous-unemotional (cu)-traits), and it presents data on the autonomic and neuroendocrine stress system as well as genetic, neurocognitive, and neuroimaging data. Differences in the impact of environmental factors on boys and girls for the development of CD are discussed. Taken together, the data indicate that there is great overlap in symptomatology, personality traits, and neurobiological aberrations in girls and boys with CD. Since fewer girls than boys exhibit CD symptomatology, further investigations on CD in girls might help to identify resilience factors that could improve future therapeutic interventions.

  1. Lateral conduction infrared photodetector

    Science.gov (United States)

    Kim, Jin K.; Carroll, Malcolm S.

    2011-09-20

    A photodetector for detecting infrared light in a wavelength range of 3-25 .mu.m is disclosed. The photodetector has a mesa structure formed from semiconductor layers which include a type-II superlattice formed of alternating layers of InAs and In.sub.xGa.sub.1-xSb with 0.ltoreq.x.ltoreq.0.5. Impurity doped regions are formed on sidewalls of the mesa structure to provide for a lateral conduction of photo-generated carriers which can provide an increased carrier mobility and a reduced surface recombination. An optional bias electrode can be used in the photodetector to control and vary a cut-off wavelength or a depletion width therein. The photodetector can be formed as a single-color or multi-color device, and can also be used to form a focal plane array which is compatible with conventional read-out integrated circuits.

  2. CONDUCTIVITY OF DONKEY MILK

    Directory of Open Access Journals (Sweden)

    F. Conte

    2009-06-01

    Full Text Available The electrical conductivity (EC of milk is considered as one of the most important parameters which supports the diagnosis of mastitis in cows.Milk ions have a considerable influence on EC and their concentrations vary depending on animal species, season, lactation stage, etc. Some components of milk can change the EC, e.g. lactose. A negative correlation between EC values and the concentration of lactose is noticed, as a consequence of the inverse relation between this disaccharide and the chlorine content in milk. Fat and casein contents exert some influence on the EC, too. This study provides preliminary results on the physiological EC values in donkey milk and aims to highlight any correlation with some of its chemical-physical parameters and Somatic Cell Count (SCC. Mean EC value in donkey milk was found to be 3.57 mS. Statistically significant correlations were found between EC and SCC (r = 0.57 , p < 0.01 and between EC and (r = 0.30 , p < 0.05. The EC and lactose were not correlated although a reduction of EC was often observed when the lactose content increased, as reported in the literature for bovine milk. According to the EC can be considered as a reliable parameter to identify any breast disorder, taking into account the physiological factors that influence EC.

  3. Thermal Contact Conductance

    Science.gov (United States)

    Salerno, Louis J.; Kittel, Peter

    1997-01-01

    The performance of cryogenic instruments is often a function of their operating temperature. Thus, designers of cryogenic instruments often are required to predict the operating temperature of each instrument they design. This requires accurate thermal models of cryogenic components which include the properties of the materials and assembly techniques used. When components are bolted or otherwise pressed together, a knowledge of the thermal performance of such joints are also needed. In some cases, the temperature drop across these joints represents a significant fraction of the total temperature difference between the instrument and its cooler. While extensive databases exist on the thermal properties of bulk materials, similar databases for pressed contacts do not. This has often lead to instrument designs that avoid pressed contacts or to the over-design of such joints at unnecessary expense. Although many people have made measurements of contact conductances at cryogenic temperatures, this data is often very narrow in scope and even more often it has not been published in an easily retrievable fashion, if published at all. This paper presents a summary of the limited pressed contact data available in the literature.

  4. Conducting Wall Hall Thrusters

    Science.gov (United States)

    Goebel, Dan M.; Hofer, Richard R.; Mikellides, Ioannis G.; Katz, Ira; Polk, James E.; Dotson, Brandon

    2013-01-01

    A unique configuration of the magnetic field near the wall of Hall thrusters, called Magnetic Shielding, has recently demonstrated the ability to significantly reduce the erosion of the boron nitride (BN) walls and extend the life of Hall thrusters by orders of magnitude. The ability of magnetic shielding to minimize interactions between the plasma and the discharge chamber walls has for the first time enabled the replacement of insulating walls with conducting materials without loss in thruster performance. The boron nitride rings in the 6 kW H6 Hall thruster were replaced with graphite that self-biased to near the anode potential. The thruster efficiency remained over 60% (within two percent of the baseline BN configuration) with a small decrease in thrust and increase in Isp typical of magnetically shielded Hall thrusters. The graphite wall temperatures decreased significantly compared to both shielded and unshielded BN configurations, leading to the potential for higher power operation. Eliminating ceramic walls makes it simpler and less expensive to fabricate a thruster to survive launch loads, and the graphite discharge chamber radiates more efficiently which increases the power capability of the thruster compared to conventional Hall thruster designs.

  5. DNA profiles from fingermarks.

    Science.gov (United States)

    Templeton, Jennifer E L; Linacre, Adrian

    2014-11-01

    Criminal investigations would be considerably improved if DNA profiles could be routinely generated from single fingermarks. Here we report a direct DNA profiling method that was able to generate interpretable profiles from 71% of 170 fingermarks. The data are based on fingermarks from all 5 digits of 34 individuals. DNA was obtained from the fingermarks using a swab moistened with Triton-X, and the fibers were added directly to one of two commercial DNA profiling kits. All profiles were obtained without increasing the number of amplification cycles; therefore, our method is ideally suited for adoption by the forensic science community. We indicate the use of the technique in a criminal case in which a DNA profile was generated from a fingermark on tape that was wrapped around a drug seizure. Our direct DNA profiling approach is rapid and able to generate profiles from touched items when current forensic practices have little chance of success.

  6. HOPWA Performance Profiles

    Data.gov (United States)

    Department of Housing and Urban Development — HOPWA Performance Profiles are generated quarterly for all agencies receiving HOPWA formula or competitive grants. Performance Profiles are available at the national...

  7. GHGRP Industrial Profiles

    Science.gov (United States)

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles contain detailed analyses. This page hosts data highlights for all sectors.

  8. Microwave Radiometer Profiler

    Data.gov (United States)

    Oak Ridge National Laboratory — The microwave radiometer profiler (MWRP) provides vertical profiles of temperature, humidity, and cloud liquid water content as a function of height or pressure at...

  9. Thermal Conductivity from Core and Well log Data

    CERN Document Server

    Hartmann, Andreas; Clauser, Christoph

    2008-01-01

    The relationships between thermal conductivity and other petrophysical properties have been analysed for a borehole drilled in a Tertiary Flysch sequence. We establish equations that permit us to predict rock thermal conductivity from logging data. A regression analysis of thermal conductivity, bulk density, and sonic velocity yields thermal conductivity with an average accuracy of better than 0.2 W/(m K). As a second step, logging data is used to compute a lithological depth profile, which in turn is used to calculate a thermal conductivity profile. From a comparison of the conductivity-depth profile and the laboratory data it can be concluded that thermal conductivity can be computed with an accuracy of less than 0.3 W/(m K)from conventional wireline data. The comparison of two different models shows that this approach can be practical even if old and incomplete logging data is used. The results can be used to infer thermal conductivity for boreholes without appropriate core data that are drilled in a simil...

  10. Molecular Dynamics Simulation of Thermal Conductivity in Si-Ge Nanocomposites

    Institute of Scientific and Technical Information of China (English)

    HUANG Xiao-Peng; HUAI Xiu-Lan

    2008-01-01

    @@ Thermal conductivity of nanocomposites is calculated by molecular dynamics (MD) simulation. The effect of size on thermal conductivity of nanowire composites and the temperature profiles are studied. The results indicate that the thermal conductivity of nanowire composites could be much lower than alloy value; the thermal conductivity is slightly dependent on temperature except at very low temperature.

  11. Holographic Hall conductivities from dyonic backgrounds

    CERN Document Server

    Lindgren, Jonathan; Taliotis, Anastasios; Vanhoof, Joris

    2015-01-01

    We develop a general framework for computing the holographic 2-point functions and the corresponding conductivities in asymptotically locally AdS backgrounds with an electric charge density, a constant magentic field, and possibly non-trivial scalar profiles, for a broad class of Einstein-Maxwell-Axion-Dilaton theories, including certain Chern-Simons terms. Holographic renormalization is carried out for any theory in this class and the computation of the renormalized AC conductivities at zero spatial momentum is reduced to solving a single decoupled first order Riccati equation. Moreover, we develop a first order fake supergravity formulalism for dyonic renormalization group flows in four dimensions, allowing us to construct analytically infinite families of such backgrounds by specifying a superpotential at will. These RG flows interpolate between AdS$_4$ in the UV and a hyperscaling violating Lifshitz geometry in the IR with exponents $1

  12. Conduction and Turbulent Mixing in Galaxy Clusters

    CERN Document Server

    Narayan, R; Kim, Woong-Tae; Narayan, Ramesh

    2004-01-01

    We discuss hydrostatic models of galaxy clusters in which heat diffusion balances radiative cooling. We consider two different sources of diffusion, thermal conduction and turbulent mixing, parameterized by dimensionless coefficients, f and alpha_mix, respectively. Models with thermal conduction give reasonably good fits to the density and temperature profiles of several cooling flow clusters, but some clusters require unphysically large values of f>1. Models with turbulent mixing give good fits to all clusters, with reasonable values of alpha_mix ~ 0.01-0.03. Both types of models are found to be essentially stable to thermal perturbations. The mixing model reproduces the observed scalings of various cluster properties with temperature, and also explains the entropy floor seen in galaxy groups.

  13. A D-region conductivity model from EISCAT VHF measurements

    Directory of Open Access Journals (Sweden)

    K. Schlegel

    Full Text Available An easy-to-use model to evaluate conductivities at high and middle latitudes in the height range 70–100 km is presented. It is based on electron density profiles obtained with the EISCAT VHF radar during 11 years and on the neutral atmospheric model MSIS95. The model uses solar zenith angle, geomagnetic activity and season as input parameters. It was mainly constructed to study the properties of Schumann resonances that depend on such conductivity profiles.

    Key words. Meteorology and atmospheric dynamics (middle atmospheric dynamics – Ionosphere (modeling and forecasting; ionosphere-atmosphere interaction

  14. Tunneling conductivity in composites of attractive colloids.

    Science.gov (United States)

    Nigro, B; Grimaldi, C; Miller, M A; Ryser, P; Schilling, T

    2012-04-28

    In conductor-insulator nanocomposites in which conducting fillers are dispersed in an insulating matrix, the electrical connectedness is established by inter-particle tunneling or hopping processes. These systems are intrinsically non-percolative and a coherent description of the functional dependence of the conductivity σ on the filler properties, and in particular of the conductor-insulator transition, requires going beyond the usual continuum percolation approach by relaxing the constraint of a fixed connectivity distance. In this article, we consider dispersions of conducting spherical particles which are connected to all others by tunneling conductances and which are subjected to an effective attractive square-well potential. We show that the conductor-insulator transition at low contents φ of the conducting fillers does not determine the behavior of σ at larger concentrations, in striking contrast to what is predicted by percolation theory. In particular, we find that at low φ the conductivity is governed almost entirely by the stickiness of the attraction, while at larger φ values σ depends mainly on the depth of the potential well. As a consequence, by varying the range and depth of the potential while keeping the stickiness fixed, composites with similar conductor-insulator transitions may display conductivity variations of several orders of magnitude at intermediate and large φ values. By using a recently developed effective medium theory and the critical path approximation, we explain this behavior in terms of dominant tunneling processes which involve inter-particle distances spanning different regions of the square-well fluid structure as φ is varied. Our predictions could be tested in experiments by changing the potential profile with different depletants in polymer nanocomposites.

  15. Comparing proton conductivity of polymer electrolytes by percent conducting volume

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yu Seung [Los Alamos National Laboratory; Pivovar, Bryan [NREL

    2009-01-01

    Proton conductivity of sulfonated polymers plays a key role in polymer electrolyte membrane fuel cells. Mass based water uptake and ion exchange capacity of sulfonated polymers have been failed to correlating their proton conductivity. In this paper, we report a length scale parameter, percent conductivity volume, which is rather simply obtained from the chemical structure of polymer to compare proton conductivity of wholly aromatic sulfonated polymer perflurosulfonic acid. Morphology effect on proton conductivity at lower RH conditions is discussed using the percent conductivity volume parameter.

  16. Conductance of Ion Channels - Theory vs. Experiment

    Science.gov (United States)

    Pohorille, Andrew; Wilson, Michael; Mijajlovic, Milan

    2013-01-01

    Transmembrane ion channels mediate a number of essential physiological processes in a cell ranging from regulating osmotic pressure to transmission of neural signals. Kinetics and selectivity of ion transport is of critical importance to a cell and, not surprisingly, it is a subject of numerous experimental and theoretical studies. In this presentation we will analyze in detail computer simulations of two simple channels from fungi - antiamoebin and trichotoxin. Each of these channels is made of an alpha-helical bundle of small, nongenomically synthesized peptides containing a number of rare amino acids and exhibits strong antimicrobial activity. We will focus on calculating ionic conductance defined as the ratio of ionic current through the channel to applied voltage. From molecular dynamics simulations, conductance can be calculated in at least two ways, each involving different approximations. Specifically, the current, given as the number of charges transferred through the channel per unit of time, can be obtained from the number of events in which ions cross the channel during the simulation. This method works well for large currents (high conductance values and/or applied voltages). If the number of crossing events is small, reliable estimates of current are difficult to achieve. Alternatively, conductance can be estimated assuming that ion transport can be well approximated as diffusion in the external potential given by the free energy profile. Then, the current can be calculated by solving the one-dimensional diffusion equation in this external potential and applied voltage (the generalized Nernst-Planck equation). To do so three ingredients are needed: the free energy profile, the position-dependent diffusion coefficient and the diffusive flux of ions into the channel. All these quantities can be obtained from molecular dynamics simulations. An important advantage of this method is that it can be used equally well to estimating large and small currents

  17. Heat conduction in 2D strongly-coupled dusty plasmas

    CERN Document Server

    Hou, Lu-Jing

    2008-01-01

    We perform non-equilibrium simulations to study heat conduction in two-dimensional strongly coupled dusty plasmas. Temperature gradients are established by heating one part of the otherwise equilibrium system to a higher temperature. Heat conductivity is measured directly from the stationary temperature profile and heat flux. Particular attention is paid to the influence of damping effect on the heat conduction. It is found that the heat conductivity increases with the decrease of the damping rate, while its magnitude confirms previous experimental measurement.

  18. Electrical Conductivity of Ferritin Proteins by Conductive AFM

    Science.gov (United States)

    Xu, Degao; Watt, Gerald D.; Harb, John N.; Davis, Robert C.

    2005-01-01

    Electrical conductivity measurements were performed on single apoferritin and holoferritin molecules by conductive atomic force microscopy. Conductivity of self-assembled monolayer films of ferritin molecules on gold surfaces was also measured. Holoferritin was 5-25 times more conductive than apoferritin, indicating that for holoferritin most electron-transfer goes through the ferrihydrite core. With 1 V applied, the average electrical currents through single holoferritin and apoferritin molecules were 2.6 PA and 0.19 PA, respectively.

  19. Extremal periodic wave profiles

    Directory of Open Access Journals (Sweden)

    E. van Groesen

    2007-01-01

    Full Text Available As a contribution to deterministic investigations into extreme fluid surface waves, in this paper wave profiles of prescribed period that have maximal crest height will be investigated. As constraints the values of the momentum and energy integrals are used in a simplified description with the KdV model. The result is that at the boundary of the feasible region in the momentum-energy plane, the only possible profiles are the well known cnoidal wave profiles. Inside the feasible region the extremal profiles of maximal crest height are "cornered" cnoidal profiles: cnoidal profiles of larger period, cut-off and periodically continued with the prescribed period so that at the maximal crest height a corner results.

  20. The electrical conductivity and surface conduction of consolidated rock cores.

    Science.gov (United States)

    Alkafeef, Saad F; Alajmi, Abdullah F

    2007-05-15

    A fully computerized high-pressure and high-temperature core holder device is simultaneously used to determine the electrical conductivity, zeta potential, and surface conductivity of consolidated rock cores in aqueous and nonaqueous systems. The total electrical conductivity of rock cores was determined by coupling streaming current and potential measurements. This shows that neglecting the surface conductivity Ksigma is crucial to converting the streaming potential into zeta potentials. It is observed that plots of the core total conductivity as a function of the electrolyte conductivity KL exhibit two behaviors. At low ionic strength, the core conductivity clearly depends on the contribution of surface conductivity behind the slip plane, whereas at higher ionic strength, the magnitude of the surface conductivity becomes negligible. The electrical conductivity of rock cores was found to be in good agreement with the O'Brien theory and the Briggs method. The contribution of the stagnant layer to the surface conductivity in nonaqueous systems has been shown to be significant. This shows that the stagnant layer displays significantly different behavior in different nonaqueous systems, depending on the core porosity and the double-layer overlap. The results indicate that the application of electrokinetics in petroleum reservoirs can provide important insights into reservoir fluid flow characterization.

  1. TEMPERAMENT CHARACTERISTICS OF CHILDREN WITH CONDUCT AND CONVERSION DISORDERS

    OpenAIRE

    1989-01-01

    SUMMARY In a comparative study of temperament profiles of groups of 30 children each diagnosed as conduct disorders, conversion disorder, emotional disorders (according to DSM-III) and normal control, it was found that the children diagnosed as conduct disorders showed high activity and intensity of emotional response as well as negative mood, those diagnosed as conversion disorder exhibited low distractibility. The significance of various temperament variables in differing clinical outcomes ...

  2. Conductivity effect in electrorheological fluids

    Institute of Scientific and Technical Information of China (English)

    TIAN; Yu; WEN; Shizhu; MENG; Yonggang

    2004-01-01

    Based on conduction model and cubic particle model, the relationship between current density and shear yield stress of electrorheological (ER) fluids was calculated and compared with some reported experimental results. The conductivity of the insulating oils is found to have been changed by the mixed particles. Several ways to decrease insulating liquid conductivity and increase the conductivity ratio of ER fluids have been proposed to prepare ER fluids with high shear yield stresses but low current densities.

  3. THERMAL CONDUCTIVITY OF METALLIC WIRES

    Institute of Scientific and Technical Information of China (English)

    LU XIANG; GU JI-HUA; CHU JUN-HAO

    2001-01-01

    The effect of radial thickness on the thermal conductivity of a free standing wire is investigated. The thermal conductivity is evaluated using the Boltzmann equation. A simple expression for the reduction in conductivity due to the increase of boundary scattering is presented. A comparison is made between the experimental results of indium wires and the theoretical calculations. It is shown that this decrease of conductivity in wires is smaller than that in film where heat flux is perpendicular to the surface.

  4. YOUNG ATHLETES' MOTIVATIONAL PROFILES

    Directory of Open Access Journals (Sweden)

    Juan Antonio Moreno Murcia

    2007-06-01

    Full Text Available The aim of this study was to examine the relationship between motivational characteristics and dispositional flow. In order to accomplish this goal, motivational profiles emerging from key constructs within Achievement Goal Theory and Self-Determination Theory were related to the dispositional flow measures. A sample of 413 young athletes (Age range 12 to 16 years completed the PMCSQ-2, POSQ, SMS and DFS measures. Cluster analysis results revealed three profiles: a "self-determined profile" characterised by higher scores on the task-involving climate perception and on the task orientation; a "non-self-determined profile", characterised by higher scores on ego-involving climate perception and ego orientation; and a "low self-determined and low non-self-determined profile" which had the lowest dispositional flow. No meaningful differences were found between the "self-determined profile" and the "non-self-determined profile" in dispositional flow. The "self-determined profile" was more commonly associated with females, athletes practising individual sports and those training more than three days a week. The "non-self-determined profile" was more customary of males and athletes practising team sports as well as those training just two or three days a week

  5. A pore water conductivity sensor

    NARCIS (Netherlands)

    Hilhorst, M.A.

    2001-01-01

    The electrical permittivity and conductivity of the bulk soil are a function of the permittivity and conductivity of the pore water. For soil water contents higher than 0.10 both functions are equal, facilitating in situ conductivity measurements of the pore water. A novel method is described, based

  6. Enterprise Surveys : Nicaragua Country Profile 2010

    OpenAIRE

    World Bank; International Finance Corporation

    2011-01-01

    The enterprise surveys focus on the many factors that shape the business environment. The qualitative and quantitative data collected through the surveys connect a country s business environment characteristics with firm productivity and performance. The country profile for Nicaragua is based on data from the enterprise surveys conducted by the World Bank. The benchmarks include the averag...

  7. Hydraulic conductivity of organomodified soil

    Energy Technology Data Exchange (ETDEWEB)

    Wallace, R.B.; Grant, J.M.; Voice, T.C.; Rakhshandehroo, G.; Xu, S.; Boyd, S.A. [Michigan State Univ., East Lansing, MI (United States)

    1995-11-01

    The effects of organomodification on soil hydraulic conductivity were investigated. Hydraulic conductivity and porosity of treated and untreated samples of a sandy loam were measured as a function of effective stress. Batch treatment with hexadecyltrimethyl ammonium (HDTMA) and dry packing produced organomodified samples that were 79% less conducive than untreated samples prior to loading. Treated samples lost less hydraulic conductivity as a result of loading than untreated samples so that treated samples had higher conductivity at high loads. Observed differences in conductivity are explained in terms of the role of the treated and untreated clay in controlling initial effective pore size and its change during consolidation.

  8. Conductive nanomaterials for printed electronics.

    Science.gov (United States)

    Kamyshny, Alexander; Magdassi, Shlomo

    2014-09-10

    This is a review on recent developments in the field of conductive nanomaterials and their application in printed electronics, with particular emphasis on inkjet printing of ink formulations based on metal nanoparticles, carbon nanotubes, and graphene sheets. The review describes the basic properties of conductive nanomaterials suitable for printed electronics (metal nanoparticles, carbon nanotubes, and graphene), their stabilization in dispersions, formulations of conductive inks, and obtaining conductive patterns by using various sintering methods. Applications of conductive nanomaterials for electronic devices (transparent electrodes, metallization of solar cells, RFID antennas, TFTs, and light emitting devices) are also briefly reviewed.

  9. Well-log based prediction of thermal conductivity

    DEFF Research Database (Denmark)

    Fuchs, Sven; Förster, Andrea

    Rock thermal conductivity (TC) is paramount for the determination of heat flow and the calculation of temperature profiles. Due to the scarcity of drill cores compared to the availability of petrophysical well logs, methods are desired to indirectly predict TC in sedimentary basins. Most...

  10. Electrical Conductivity of the Carbon Fiber Conductive Concrete

    Institute of Scientific and Technical Information of China (English)

    HOU Zuofu; LI Zhuoqiu; WANG Jianjun

    2007-01-01

    This paper discussed two methods to enhance the electrical conductivity of the carbon fiber(CF) electrically conductive concrete. The increase in the content of stone and the amount of water used to dissolve the methylcellulose and marinate the carbon fibers can decrease the electrical resistivity of the electrically conductive concrete effectively. Based on these two methods, the minimum CF content of the CF electrically conductive concrete for deicing or snow-melting application and the optimal ratio of the amount of water to dissolve the methylcellulose and marinate the carbon fibers were obtained.

  11. Spiking the expectancy profiles

    DEFF Research Database (Denmark)

    Hansen, Niels Chr.; Loui, Psyche; Vuust, Peter

    Melodic expectations have long been quantified using expectedness ratings. Motivated by statistical learning and sharper key profiles in musicians, we model musical learning as a process of reducing the relative entropy between listeners' prior expectancy profiles and probability distributions...... learning over varying timescales enables listeners to generate expectations with reduced entropy....

  12. Household electricity demand profiles

    DEFF Research Database (Denmark)

    Marszal, Anna Joanna; Heiselberg, Per Kvols; Larsen, Olena Kalyanova

    2016-01-01

    Highlights •A 1-min resolution household electricity load model is presented. •Model adapts a bottom-up approach with single appliance as the main building block. •Load profiles are used to analyse the flexibility potential of household appliances. •Load profiles can be applied in other domains, e...

  13. Chemical profiling of explosives

    NARCIS (Netherlands)

    Brust, G.M.H.

    2014-01-01

    The primary goal of this thesis is to develop analytical methods for the chemical profiling of explosives. Current methodologies for the forensic analysis of explosives focus on identification of the explosive material. However, chemical profiling of explosives becomes increasingly important, as

  14. Reinforced aerodynamic profile

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to the prevention of deformations in an aerodynamic profile caused by lack of resistance to the bending moment forces that are created when such a profile is loaded in operation. More specifically, the invention relates to a reinforcing element inside an aerodynamic...

  15. Height-integrated conductivity in auroral substorms - 2. Modeling

    DEFF Research Database (Denmark)

    Gjerløv, Jesper Wittendorff; Hoffman, R.A.

    2000-01-01

    Calculations of height-integrated conductivity from 31 individual Dynamics Explorer (DE 2) substorm crossings presented by Gjerloev and Hoffman [this issue] are used to compile empirical models of the height-integrated Pedersen and Hall conductivities (conductances) in a bulge-type auroral substorm....... Global auroral images obtained by Dynamics Explorer 1 (DE 1) were used to select substorms displaying a typical bulge-type emission pattern and each individual DE 2 pass was positioned with respect to key features in the observed emission pattern. The conductances were calculated for each DE 2 pass using...... electron precipitation data and a monoenergetic conductance model. All passes were divided into six different sectors, and average conductance profiles were carefully deduced for each of these sectors. Using a simple boxcar filter, smoothed average sector passes were calculated and from linear...

  16. Theoretical approaches to superionic conductivity

    Indian Academy of Sciences (India)

    C S Sunandana; P Senthil Kumar

    2004-02-01

    Recent theoretical approaches to the understanding of superionic conductivity in polycrystalline, glassy and polymeric materials are briefly reviewed. Phase transitions to the superionic conducting state in the AgI family are apparently triggered by cluster formation and strong mobile ion interaction within the clusters. Anomalous conductivity and related physical properties are explained in the cluster induced distortion model. Ionic composites such as AgX : Al2O3 ( = Cl, Br and I) involve conducting and non-conducting phases and the all-important interface between the two whose space charge enhances the conductivity and also trigger phase transitions to exotic polymorphic phases, for which the mechanisms are yet to be explored. Ion hopping dynamics controls the conductivity of superionic glasses. Mode coupling and jump relaxation theories account for the non-Debye relaxation observed in a.c. conductivity of these glasses. The theory of conductivity in polymer electrolytes-still in its infancy-involves their complex structure and glass transition behaviour. Preparative and thermal history, composition and crystallinity control ionic conductivity. New approaches to the synthesis of optimal polymer electrolytes such as rubbery electrolytes, crystalline polymers and nanocomposites must be considered before achieving a comprehensive theoretical understanding.

  17. Profiling the Mobile Customer

    DEFF Research Database (Denmark)

    Jessen, Pernille Wegener; King, Nancy J.

    2010-01-01

    of significant concerns about privacy and data protection. This second article in a two part series on "Profiling the Mobile Customer" explores how to best protect consumers' privacy and personal data through available mechanisms that include industry self-regulation, privacy-enhancing technologies......Mobile customers are increasingly being tracked and profiled by behavioural advertisers to enhance delivery of personalized advertising. This type of profiling relies on automated processes that mine databases containing personally-identifying or anonymous consumer data, and it raises a host...... discusses the current limitations of using technology to protect consumers from privacy abuses related to profiling. Concluding that industry self-regulation and available privacy-enhancing technologies will not be adequate to close important privacy gaps related to consumer profiling without legislative...

  18. LIPID PROFILE IN SUDDEN SENSORINEURAL HEARING LOSS- A PROSPECTIVE STUDY

    National Research Council Canada - National Science Library

    Anil H. T; S. D. Mahamood Pasha

    2017-01-01

    .... Relevant history was obtained. Examination and investigations were conducted. RESULTS Statistical analysis showed that there was significant difference between the means of lipid profile of the patients and the control group...

  19. United Nations Environment Program - Sustainable Purchasing Guidance Profile

    Science.gov (United States)

    To help you find the resource that is right for your organization, EPA conducted a scan of the landscape and developed summary profiles of some of the leading sources of sustainable purchasing guidance around the globe.

  20. Estimating Cognitive Profiles Using Profile Analysis via Multidimensional Scaling (PAMS)

    Science.gov (United States)

    Kim, Se-Kang; Frisby, Craig L.; Davison, Mark L.

    2004-01-01

    Two of the most popular methods of profile analysis, cluster analysis and modal profile analysis, have limitations. First, neither technique is adequate when the sample size is large. Second, neither method will necessarily provide profile information in terms of both level and pattern. A new method of profile analysis, called Profile Analysis via…

  1. Thermoelectric Properties of Conducting Polymers

    Science.gov (United States)

    1994-07-01

    conductivity of highly ordered pyrolytic graphite and benzene-derived graphite fiber. For a heat treament temperature (HTT) of 2900 °C, the unstretched film has... heat transmission is 5 important. The electrons responsible for electrical conductivity in metals also allow heat transmission by electrons, K. in Fig. 1... Heat transmission in polymers is by means of lattice vibrations, K, which do not contribute to electrical conductvity. Previous work with conducting

  2. Height-integrated conductivity in auroral substorms. 1. Data

    DEFF Research Database (Denmark)

    Gjerløv, Jesper Wittendorff; Hoffman, R.A.

    2000-01-01

    to select substorms which display a typical bulge-type auroral emission pattern and to organize the position of individual DE 2 passes with respect to key features in the emission pattern. The Hall and Pedersen conductances are calculated from electron precipitation data obtained by the low altitude plasma...... instrument (LAPI) carried on DE 2 and the monoenergetic conductance model by Reiff [1984]. This method is shown to effectively minimize undesirable smearing of parameters in statistical substorm studies. Large spatial gradients in the conductance profiles are common in high-latitude part of the premidnight...

  3. Thermal conductivity of boron carbides

    Science.gov (United States)

    Wood, C.; Emin, D.; Gray, P. E.

    1985-01-01

    Knowledge of the thermal conductivity of boron carbide is necessary to evaluate its potential for high-temperature thermoelectric energy conversion applications. Measurements have been conducted of the thermal diffusivity of hot-pressed boron carbide BxC samples as a function of composition (x in the range from 4 to 9), temperature (300-1700 K), and temperature cycling. These data, in concert with density and specific-heat data, yield the thermal conductivities of these materials. The results are discussed in terms of a structural model that has been previously advanced to explain the electronic transport data. Some novel mechanisms for thermal conduction are briefly discussed.

  4. Holographic Conductivity in Disordered Systems

    CERN Document Server

    Ryu, Shinsei; Ugajin, Tomonori

    2011-01-01

    The main purpose of this paper is to holographically study the behavior of conductivity in 2+1 dimensional disordered systems. We analyze probe D-brane systems in AdS/CFT with random closed string and open string background fields. We give a prescription of calculating the DC conductivity holographically in disordered systems. In particular, we find an analytical formula of the conductivity in the presence of codimension one randomness. We also systematically study the AC conductivity in various probe brane setups without disorder and find analogues of Mott insulators.

  5. Disentangling criminal profiling: accuracy, homology, and the myth of trait-based profiling.

    Science.gov (United States)

    Kocsis, Richard N; Palermo, George B

    2015-03-01

    The scholarly literature over the past decade has chronicled a growing problem in the forensic technique colloquially called criminal profiling. The basis of this conundrum appears to originate from a concept referred to as "offender homology," which presumes an inherent uniformity among offenders that is believed to underpin the analytic process incumbent to criminal profiling. Studies thus far conducted have apparently struggled to find evidence of offender homology, and based upon these findings arguments have been promulgated that various approaches to criminal profiling imputably labeled as "trait-based" are therefore not viable. Indirectly contradicting these arguments, however, have been studies testing profiler accuracy that have found evidence of individuals who appear to use trait-based methods but can nonetheless proficiently predict the characteristics of unknown offenders. Against this backdrop, the present article examines a number of tenets and disjunctions that appear to have arisen from research into offender homology and imputed to the practices of so-called trait-based profiling. The notion of whether trait-based profiling is, in fact, representative of profiling methods is examined and an integrative hypothesis proposed that attempts to resolve the quandary between offender homology and profiler accuracy. © The Author(s) 2013.

  6. Minimum Thermal Conductivity of Superlattices

    Energy Technology Data Exchange (ETDEWEB)

    Simkin, M. V.; Mahan, G. D.

    2000-01-31

    The phonon thermal conductivity of a multilayer is calculated for transport perpendicular to the layers. There is a crossover between particle transport for thick layers to wave transport for thin layers. The calculations show that the conductivity has a minimum value for a layer thickness somewhat smaller then the mean free path of the phonons. (c) 2000 The American Physical Society.

  7. Conductive Mechanism of Organic Conductor

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Organic conductor is a kind of organic compound which has special electronic and magnetic properties. The research of the organic compounds has received considerable attention because of their potential applications in many areas. The molecular conductive units are theoretically investigated as well as their energy gap and charge distribution. The relationship of conductivity and micro-mechanism is discussed.

  8. Thermal conductivity of supercooled water.

    Science.gov (United States)

    Biddle, John W; Holten, Vincent; Sengers, Jan V; Anisimov, Mikhail A

    2013-04-01

    The heat capacity of supercooled water, measured down to -37°C, shows an anomalous increase as temperature decreases. The thermal diffusivity, i.e., the ratio of the thermal conductivity and the heat capacity per unit volume, shows a decrease. These anomalies may be associated with a hypothesized liquid-liquid critical point in supercooled water below the line of homogeneous nucleation. However, while the thermal conductivity is known to diverge at the vapor-liquid critical point due to critical density fluctuations, the thermal conductivity of supercooled water, calculated as the product of thermal diffusivity and heat capacity, does not show any sign of such an anomaly. We have used mode-coupling theory to investigate the possible effect of critical fluctuations on the thermal conductivity of supercooled water and found that indeed any critical thermal-conductivity enhancement would be too small to be measurable at experimentally accessible temperatures. Moreover, the behavior of thermal conductivity can be explained by the observed anomalies of the thermodynamic properties. In particular, we show that thermal conductivity should go through a minimum when temperature is decreased, as Kumar and Stanley observed in the TIP5P model of water. We discuss physical reasons for the striking difference between the behavior of thermal conductivity in water near the vapor-liquid and liquid-liquid critical points.

  9. Electrically conductive anodized aluminum coatings

    Science.gov (United States)

    Alwitt, Robert S. (Inventor); Liu, Yanming (Inventor)

    2001-01-01

    A process for producing anodized aluminum with enhanced electrical conductivity, comprising anodic oxidation of aluminum alloy substrate, electrolytic deposition of a small amount of metal into the pores of the anodized aluminum, and electrolytic anodic deposition of an electrically conductive oxide, including manganese dioxide, into the pores containing the metal deposit; and the product produced by the process.

  10. INFRARED EMISSIVITY OF CONDUCTING POLYMERS

    Institute of Scientific and Technical Information of China (English)

    WAN Meixiang; LI Suzhen; LI Junchao; DONG Haiou

    1991-01-01

    The infrared emissivity of conducting polymers in 8-20μm and at 50-150℃ in the direction of normal line has been measured as a function of wavelength, conductivity at room temperature,counterion, doping levels, measuring temperature and thickness of sample.

  11. Experiment study of forming and activation of conductive film of the surface conduction electron emitter display

    Institute of Scientific and Technical Information of China (English)

    LEI Xin; XU Wei-jun; LIU Chun-liang; LIANG Zhi-hu

    2007-01-01

    The forming and activation of the conductive films are studied experimentally. The power supply,a peak-to-peak 30 V triangle profile voltage,is applied to three kinds of conductive films that contain 0.25%,0.5%,and 1% of palladium respectively. In the experiments we contrasted the values of related parameter in different conditions,observed the lumi nous spots on the anode panel,dealt with and analyzed the related data,and compared the positions and the amount of the luminous spots. We have gotten the conclusion that there is a threshold value Uth. The emission current Ie will increase rapidly when the device voltage Uf is greater than Uth. And the emission current Ie could be controlled by the device voltage Uf.The positions of the luminous spots on the anode panel are related with the device voltage Uf.

  12. Intraatrial conduction disturbances: vectorcardiographic patterns.

    Science.gov (United States)

    Zoneraich, O; Zoneraich, S

    1976-04-01

    Frank P loop vectorcardiograms were recorded in 30 normal subjects and in 40 patients who had intraatrial conduction disturbances alone or in association with cardiac disease. High magnification of the P loop (0.1 mv = 3 cm) permitted accurate measurement of the P loop duration, magnitude and direction. High-frequency recordings allowed optimal evaluation of the notches, bites and conduction delays in the PsE loop. Four vectorcardiographic patterns have been selected as counterparts of the four types of enlarged P waves seen in electrocardiograms of patients with atrial conduction disturbances. When intraatrial conduction disturbances coexisted with left atrial enlargment, the PsE loop was larger and smoother. The role of partial or complete block in the specific internodal or interatrial pathways is discussed. High magnification, high-frequency vectorcardiography of the P loop seems to be the best available method for determing a specific pattern of intraatrial conduction disturbance.

  13. Thermal conductance through molecular wires

    CERN Document Server

    Segal, D; Nitzan, A; Segal, Dvira; Nitzan, Abraham; Hanggi, Peter

    2003-01-01

    We consider phononic heat transport through molecular chains connecting two thermal reservoirs. For relatively short molecules at normal temperatures heat conduction is dominated by the harmonic part of the molecular force-field. We develop a general theory for the heat conduction through harmonic chains in 3-dimensions. A Landauer-type expression for the heat conduction is obtained, in agreement with other recent studies. We use this formalism to study the heat conduction properties of alkanes. For relatively short (1-30 carbon atoms) chains the length and temperature dependence of the molecular heat conduction result from the balance of three factors: (i) The molecular frequency spectrum in relation to the frequency cutoff of the thermal reservoirs, (ii) the degree of localization of the molecular normal modes and (iii) the molecule-heat reservoirs coupling. The fact that molecular modes at different frequency regimes have different localization properties gives rise to intricate dependence of the heat cond...

  14. Conductive polymer-based material

    Science.gov (United States)

    McDonald, William F.; Koren, Amy B.; Dourado, Sunil K.; Dulebohn, Joel I.; Hanchar, Robert J.

    2007-04-17

    Disclosed are polymer-based coatings and materials comprising (i) a polymeric composition including a polymer having side chains along a backbone forming the polymer, at least two of the side chains being substituted with a heteroatom selected from oxygen, nitrogen, sulfur, and phosphorus and combinations thereof; and (ii) a plurality of metal species distributed within the polymer. At least a portion of the heteroatoms may form part of a chelation complex with some or all of the metal species. In many embodiments, the metal species are present in a sufficient concentration to provide a conductive material, e.g., as a conductive coating on a substrate. The conductive materials may be useful as the thin film conducting or semi-conducting layers in organic electronic devices such as organic electroluminescent devices and organic thin film transistors.

  15. Thermal Conductivity Measurement of Synthesized Mantle Minerals

    Science.gov (United States)

    Asimow, P. D.; Luo, S.; Mosenfelder, J. L.; Liu, W.; Staneff, G. D.; Ahrens, T. J.; Chen, G.

    2002-12-01

    Direct thermal conductivity (k) measurement of mantle minerals is crucial to constrain the thermal profile of the Earth as well as geodynamic studies of the mantle (e.g., to determine the Rayleigh number). We have embarked on systematic multi-anvil syntheses of dense polycrystalline specimens of mantle phases of adequate size and zero porosity for precise thermal conductivity measurements by the 3ω method (\\textit{Cahill and Pohl, Phys. Rev. B, 1987}) under elevated temperatures (T). Coesite and stishovite (see \\textit{Luo et al., GRL, 2002}) as well as majorite and wadsleyite have been synthesized; ringwoodite and perovskite are scheduled. Preliminary thermal conductivity measurements at ambient pressure on coesite (120 - 300 K, 9.53 Wm-1K-1 at 300 K) are consistent with prior room temperature data (\\textit{Yukutake & Shimada, PEPI, 1978}), while our stishovite data at 300 K appear to be low (1.96 Wm-1K-1). Efforts are being made to extend the measurement to higher temperatures (e.g., above Debye temperature Θ D), thus allowing determination of k(T) relationship (say, k~ T-n); success will depend on the decomposition kinetics of these metastable phases. The pressure dependence of k of these synthesized samples can also be measured (\\textit{e.g., Osako et al., HPMPS-6, 2002; Xu et al., EOS, 2001}). Recent thermal conductivity measurement on LiF and Al2O_3 from shock wave loading (\\textit{Holland & Ahrens, 1998}) is consistent with the modeling on MgO and Al2O_3 (\\textit{Manga & Jeanloz, JGR, 1997}) with classical theories. Thus, k values at modest pressures and T (say, above Θ D) would allow extrapolation of k to appropriate mantle conditions.

  16. The North German Conductivity Anomaly revisited

    Science.gov (United States)

    Schäfer, A.; Houpt, L.; Brasse, H.; Hoffmann, N.

    2011-10-01

    The North German Conductivity Anomaly was detected already in the early years of electromagnetic deep sounding. It refers to the reversal of induction arrows (as a graphical representation of the tipper transfer function, the ratio of vertical to horizontal magnetic field variations) at the northern and southern margins of the North German Basin. In spite of the many experiments carried out so far, its origin has remained ambiguous; explanations encompass a deep-crustal or even mantle source as well as the simple response to deepening of sedimentary sequences in the centre of the basin. Here, we report on modelling of new long-period magnetotelluric data collected along two profiles in NE Germany and S Sweden, with one transect crossing the Sorgenfrei-Tornquist Zone as the main boundary between Precambrian Baltica and the Palaeozoic belts of central Europe. With the exception of a few sites probably influenced by 3-D salt domes, the data allow a 2-D analysis. Resolution is reduced for large depths due to a well-conducting, saline aquifer, extending across the entire basin. The main result is that the reversal of induction arrows can largely be explained by the resistivity contrast between crystalline basement and sedimentary basin fill. Beneath Rügen island, a southward dipping conductor is interpreted to reflect an alum shale layer in Middle Cambrian-Lower Ordovician sediments. Beneath the southern basin, a moderately conductive upper mantle is modelled (although not very well resolved) which may reflect the thinning of the lithosphere as implied by seismic tomography. As the main anomalously inductive effect is primarily explained by the basin edges and numerous other anomalies exist inside the basin, we suggest not using the term 'North German Conductivity Anomaly' any longer.

  17. Qualitative Value Profiling

    DEFF Research Database (Denmark)

    Duus, Henrik Johannsen; Bjerre, Mogens

    2015-01-01

    Qualitative value profiling (QVP) is a relatively unknown method of strategic analysis for companies in international business-to-business settings. The purpose of QVP is to reduce the information complexity that is faced by international companies in dealing with business partners. The QVP method...... allows the development of 1) profiles of the target country in which operations are to take place, 2) profiles of the buying center (i.e. the group of decision makers) in the partner company, and 3) profiles of the product/service offering. It also allows the development of a semantic scaling method...... for deeper analysis of all involved factors. This paper presents the method and compares and contrasts it with other similar methods like the PESTELE method known from corporate strategy, the STEEPAL method known from scenario analysis, and the Politics-Institutions-Economy (PIE) framework known from...

  18. Profile of Older Americans

    Science.gov (United States)

    ... covers 15 topical areas, including population, income and poverty, living arrangements, education, health, and caregiving. A Profile ... Elder Justice Innovation Grants Late Life Domestic Violence World Elder Abuse Awareness Day State Grants to Enhance ...

  19. Prescription Drug Profiles PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This release contains the Prescription Drug Profiles Public Use Files (PUFs) drawn from Medicare prescription drug claims for the year of the date on which the...

  20. Beach Profile Locations

    Data.gov (United States)

    California Department of Resources — Beaches are commonly characterized by cross-shore surveys. The resulting profiles represent the elevation of the beach surface and nearshore seabed from the back of...

  1. Fishing Community Profiles

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — To enable fisheries managers to comply with National Standard 8 (NS8), NMFS social scientists around the nation are preparing fishing community profiles that present...

  2. Wind Profiling Radar

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Clutter present in radar return signals as used for wind profiling is substantially removed by carrying out a Daubechies wavelet transformation on a time series of...

  3. Profiles in Cancer Research

    Science.gov (United States)

    These articles put a face to some of the thousands of individuals who contribute to NCI’s cancer research efforts. The profiles highlight the work of scientists and clinicians and describe the circumstances and motivation behind their work.

  4. Profiling the Mobile Customer

    DEFF Research Database (Denmark)

    Jessen, Pernille Wegener; King, Nancy J.

    2010-01-01

    Mobile customers are increasingly being tracked and profiled by behavioural advertisers to enhance delivery of personalized advertising. This type of profiling relies on automated processes that mine databases containing personally-identifying or anonymous consumer data, and it raises a host...... of significant concerns about privacy and data protection. This second article in a two part series on "Profiling the Mobile Customer" explores how to best protect consumers' privacy and personal data through available mechanisms that include industry self-regulation, privacy-enhancing technologies...... and legislative reform. 1 It discusses how well privacy and personal data concerns related to consumer profiling are addressed by two leading industry self-regulatory codes from the UK and the U.S. that aim to establish fair information practices for behavioural advertising by their member companies. It also...

  5. Fire Management Species Profiles

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The objective of the Fire Management Species Profile project is to identify habitat management objectives that are specific, measurable, achievable, clearly...

  6. Beach Profile Locations

    Data.gov (United States)

    California Department of Resources — Beaches are commonly characterized by cross-shore surveys. The resulting profiles represent the elevation of the beach surface and nearshore seabed from the back of...

  7. Thermal conductivity modeling of water containing metal oxide nanoparticles

    Institute of Scientific and Technical Information of China (English)

    Ahmad Azari

    2015-01-01

    The nano particles have demonstrated great potential to improve the heat transfer characteristics of heat transfer fluids. Possible parameters responsible for this increase were studied. The heat transfer profile in the nanolayer region was combined with other parameters such as volume fraction, particle radius thermal conductivity of the fluid, particle and nanolayer, to formulate a thermal conductivity model. Results predicting the thermal conductivity of nanofluids using the model were compared with experimental results as well as studies by other researchers. The comparison of the results obtained for the CuO/water and TiO2/water nanofluids studied shows that the correlation proposed is in closest proximity in predicting the experimental results for the thermal conductivity of a nanofluid. Also, a parametric study was performed to understand how a number of factors affect the thermal conductivity of nanofluids using the developed correlation.

  8. Thermal conductivity of graphene laminate.

    Science.gov (United States)

    Malekpour, H; Chang, K-H; Chen, J-C; Lu, C-Y; Nika, D L; Novoselov, K S; Balandin, A A

    2014-09-10

    We have investigated thermal conductivity of graphene laminate films deposited on polyethylene terephthalate substrates. Two types of graphene laminate were studied, as deposited and compressed, in order to determine the physical parameters affecting the heat conduction the most. The measurements were performed using the optothermal Raman technique and a set of suspended samples with the graphene laminate thickness from 9 to 44 μm. The thermal conductivity of graphene laminate was found to be in the range from 40 to 90 W/mK at room temperature. It was found unexpectedly that the average size and the alignment of graphene flakes are more important parameters defining the heat conduction than the mass density of the graphene laminate. The thermal conductivity scales up linearly with the average graphene flake size in both uncompressed and compressed laminates. The compressed laminates have higher thermal conductivity for the same average flake size owing to better flake alignment. Coating plastic materials with thin graphene laminate films that have up to 600× higher thermal conductivity than plastics may have important practical implications.

  9. Edge conduction in vacuum glazing

    Energy Technology Data Exchange (ETDEWEB)

    Simko, T.M.; Collins, R.E. [Sydney Univ., NSW (Australia). Dept. of Applied Physics; Beck, F.A.; Arasteh, D. [Lawrence Berkeley Lab., CA (United States)

    1995-03-01

    Vacuum glazing is a form of low-conductance double glazing using in internal vacuum between the two glass sheets to eliminate heat transport by gas conduction and convection. An array of small support pillars separates the sheets; fused solder glass forms the edge seal. Heat transfer through the glazing occurs by radiation across the vacuum gap, conduction through the support pillars, and conduction through the bonded edge seal. Edge conduction is problematic because it affects stresses in the edge region, leading to possible failure of the glazing; in addition, excessive heat transfer because of thermal bridging in the edge region can lower overall window thermal performance and decrease resistance to condensation. Infrared thermography was used to analyze the thermal performance of prototype vacuum glazings, and, for comparison, atmospheric pressure superwindows. Research focused on mitigating the edge effects of vacuum glazings through the use of insulating trim, recessed edges, and framing materials. Experimentally validated finite-element and finite-difference modeling tools were used for thermal analysis of prototype vacuum glazing units and complete windows. Experimental measurements of edge conduction using infrared imaging were found to be in good agreement with finite-element modeling results for a given set of conditions. Finite-element modeling validates an analytic model developed for edge conduction.

  10. Hydraulic conductivity of compacted zeolites.

    Science.gov (United States)

    Oren, A Hakan; Ozdamar, Tuğçe

    2013-06-01

    Hydraulic conductivities of compacted zeolites were investigated as a function of compaction water content and zeolite particle size. Initially, the compaction characteristics of zeolites were determined. The compaction test results showed that maximum dry unit weight (γ(dmax)) of fine zeolite was greater than that of granular zeolites. The γ(dmax) of compacted zeolites was between 1.01 and 1.17 Mg m(-3) and optimum water content (w(opt)) was between 38% and 53%. Regardless of zeolite particle size, compacted zeolites had low γ(dmax) and high w(opt) when compared with compacted natural soils. Then, hydraulic conductivity tests were run on compacted zeolites. The hydraulic conductivity values were within the range of 2.0 × 10(-3) cm s(-1) to 1.1 × 10(-7) cm s(-1). Hydraulic conductivity of all compacted zeolites decreased almost 50 times as the water content increased. It is noteworthy that hydraulic conductivity of compacted zeolite was strongly dependent on the zeolite particle size. The hydraulic conductivity decreased almost three orders of magnitude up to 39% fine content; then, it remained almost unchanged beyond 39%. Only one report was found in the literature on the hydraulic conductivity of compacted zeolite, which is in agreement with the findings of this study.

  11. BWR AXIAL PROFILE

    Energy Technology Data Exchange (ETDEWEB)

    J. Huffer

    2004-09-28

    The purpose of this calculation is to develop axial profiles for estimating the axial variation in burnup of a boiling water reactor (BWR) assembly spent nuclear fuel (SNF) given the average burnup of an assembly. A discharged fuel assembly typically exhibits higher burnup in the center and lower burnup at the ends of the assembly. Criticality safety analyses taking credit for SNF burnup must account for axially varying burnup relative to calculations based on uniformly distributed assembly average burnup due to the under-burned tips. Thus, accounting for axially varying burnup in criticality analyses is also referred to as accounting for the ''end effect'' reactivity. The magnitude of the reactivity change due to ''end effect'' is dependent on the initial assembly enrichment, the assembly average burnup, and the particular axial profile characterizing the burnup distribution. The set of bounding axial profiles should incorporate multiple BWR core designs and provide statistical confidence (95 percent confidence that 95 percent of the population is bound by the profile) that end nodes are conservatively represented. The profiles should also conserve the overall burnup of the fuel assembly. More background on BWR axial profiles is provided in Attachment I.

  12. Accelerated Profile HMM Searches.

    Directory of Open Access Journals (Sweden)

    Sean R Eddy

    2011-10-01

    Full Text Available Profile hidden Markov models (profile HMMs and probabilistic inference methods have made important contributions to the theory of sequence database homology search. However, practical use of profile HMM methods has been hindered by the computational expense of existing software implementations. Here I describe an acceleration heuristic for profile HMMs, the "multiple segment Viterbi" (MSV algorithm. The MSV algorithm computes an optimal sum of multiple ungapped local alignment segments using a striped vector-parallel approach previously described for fast Smith/Waterman alignment. MSV scores follow the same statistical distribution as gapped optimal local alignment scores, allowing rapid evaluation of significance of an MSV score and thus facilitating its use as a heuristic filter. I also describe a 20-fold acceleration of the standard profile HMM Forward/Backward algorithms using a method I call "sparse rescaling". These methods are assembled in a pipeline in which high-scoring MSV hits are passed on for reanalysis with the full HMM Forward/Backward algorithm. This accelerated pipeline is implemented in the freely available HMMER3 software package. Performance benchmarks show that the use of the heuristic MSV filter sacrifices negligible sensitivity compared to unaccelerated profile HMM searches. HMMER3 is substantially more sensitive and 100- to 1000-fold faster than HMMER2. HMMER3 is now about as fast as BLAST for protein searches.

  13. Electrically conductive and thermally conductive materials for electronic packaging

    Science.gov (United States)

    Liu, Zongrong

    The aim of this dissertation is to develop electrically or thermally conductive materials that are needed for electronic packaging and microelectronic cooling. These materials are in the form of coatings and are made from pastes. The research work encompasses paste formulation, studying the process of converting a paste to a conductive material, relating the processing conditions to the structure and performance, and evaluating performance attributes that are relevant to the application of these conductive materials. The research has resulted in new information that is valuable to the microelectronic industry. Work on electrically conductive materials emphasizes the development of electrical interconnection materials in the form of air-firable glass-free silver-based electrically conductive thick films, which use the Ti-Al alloy as the binder and are in contrast to conventional films that use glass as the binder. The air-firability, as enabled by minor additions of tin and zinc to the paste, is in contrast to previous glass-free films that are not firable. The recommended firing condition is 930°C in air. The organic vehicle in the paste comprises ethyl cellulose, which undergoes thermal decomposition during burnout of the paste. The ethyl cellulose is dissolved in ether, which facilitates the burnout. Excessive ethyl cellulose hinders the burnout. A higher heating rate results in more residue after burnout. The presence of silver particles facilitates drying and burnout. Firing in air gives lower resistivity than firing in oxygen. Firing in argon gives poor films. Compared to conventional films that use glass as the binder, these films, when appropriately fired, exhibit lower electrical resistivity (2.5 x 10-6 O.cm) and higher scratch resistance. Work on thermally conductive materials addresses thermal interface materials, which are materials placed at the interface between a heat sink and a heat source for the purpose of improving the thermal contact. Heat

  14. Electrical Conductivity of Cryolite Melts

    Science.gov (United States)

    Fellner, P.; Grjotheim, K.; Kvande, H.

    1985-11-01

    This paper proposes an equation for the electrical conductivity of multicomponent cryolite-based mixtures. The equation is based on a physical model which assumes that the conductivity is proportional to the number density of the effective electric charges in the melt. The various authors in the available literature show a great discrepancy in conductivity data of cryolite-based melts. The equation based on the physical model enables determination of which set of data is preferable. Special consideration in this respect is given to the influence of magnesium flouride and lithium flouride additions to the melt.

  15. Molecular dynamics simulations of non-Fourier heat conduction

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Unsteady heat conduction is known to deviate significantly from Fourier's law when the system time and length scales are within certain temporal and spatial windows of relaxation. Classical molecular dynamics simulations were used to investigate unsteady heat conduction in argon thin films with a sudden temperature increase or heat flux at one surface to study the non-Fourier heat conduction effects in argon thin films. The studies were conducted with both pure argon films and films with vacancy defects. The temperature pro- files in the argon films showed the existence of mechanical waves when the thin film was suddenly heated and the wave nature of the heat propagation. The flux phase relaxation time, τq, and the temperature phase relaxation time, τq were calculated from the temporal vari- ations of the energy flux and temperature distribution in the film. Comparisons of the MD temperature profiles with temperature profiles predicted by Fourier's law show that Fourier's law is not able to predict the temperature variations with time. Different film thicknesses were also studied to illustrate the variation of the time needed for the films to reach steady-state temperature profiles after a sudden tem- perature rise at one surface and to illustrate the finite speed of the energy waves.

  16. Conducting polymer 3D microelectrodes

    DEFF Research Database (Denmark)

    Sasso, Luigi; Vazquez, Patricia; Vedarethinam, Indumathi

    2010-01-01

    Conducting polymer 3D microelectrodes have been fabricated for possible future neurological applications. A combination of micro-fabrication techniques and chemical polymerization methods has been used to create pillar electrodes in polyaniline and polypyrrole. The thin polymer films obtained...

  17. Conducting Polymers: Emerging Commercial Materials

    Directory of Open Access Journals (Sweden)

    N. Kumar

    1996-04-01

    Full Text Available Conducting polymers are materials of recent origin. They are obtained by polymerisation of simple organic monomers and doping with electron acceptor or donor species and show conductivity ranging from that of a semiconductor to that of metal. These materials are now available with unique electronic and optical properties of metals and semiconductors in combination with the attractive mechanical and processable advantages of polymers. The field has progressed to a level of maturity consistent with a new set of opportunities to develop Wide range of applications based upon conducting polymers as materials for industrial products.Examples include: static charge dissipation, EMI shielding, flexible light emitting diodes, transparent electrodes, batteries, gas sensors, gas separators, etc. Many of the conducting polymers and devices based on them are now available commercially.

  18. Thermally conducting electron transfer polymers

    Science.gov (United States)

    Byrd, N. R.; Jenkins, R. K.; Lister, J. L.

    1969-01-01

    New polymeric material exhibits excellent physical shock protection, high electrical resistance, and thermal conductivity. It is especially useful for electronic circuitry, such as subminiaturization of components and modular construction of circuits.

  19. NOAA NOS SOS, EXPERIMENTAL - Conductivity

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA NOS SOS server is part of the IOOS DIF SOS Project. The stations in this dataset have conductivity data. *These services are for testing and evaluation use...

  20. Heat conduction mechanism in nanofluids

    Energy Technology Data Exchange (ETDEWEB)

    Pang, Changwei; Hong, Hi ki [Kyung Hee University, Yongin (Korea, Republic of); Kang, Yong Tae; Lee, Jae Won [Korea University, Seoul (Korea, Republic of)

    2014-07-15

    Nanofluids are produced by dispersing nanoparticles in basefluid. Given its superior thermo-physical properties, nanofluids are gaining increasing attention and are showing promising potential in various applications. Numerous studies have been conducted in the past decade to experimentally and theoretically investigate thermal conductivity. The experimental finding is briefly summarized in this study; however, we do not intend to present a systematic summary of the available references from the literature. The primary objective of this study is to review and summarize the most debated mechanisms for heat conduction in nanofluids, such as the effects of a nanolayer, the Brownian motion of nanoparticles and aggregation, as well as induced convection. Finally, at a low concentration of nanoparticles, nanoconvection is the leading contributor to thermal conductivity enhancement, whereas at a higher concentration, the natural thermal transport along the backbone would aggregate, and the effects of the nanolayer would become significant and become ineligible.

  1. Shape memory thermal conduction switch

    Science.gov (United States)

    Vaidyanathan, Rajan (Inventor); Krishnan, Vinu (Inventor); Notardonato, William U. (Inventor)

    2010-01-01

    A thermal conduction switch includes a thermally-conductive first member having a first thermal contacting structure for securing the first member as a stationary member to a thermally regulated body or a body requiring thermal regulation. A movable thermally-conductive second member has a second thermal contacting surface. A thermally conductive coupler is interposed between the first member and the second member for thermally coupling the first member to the second member. At least one control spring is coupled between the first member and the second member. The control spring includes a NiTiFe comprising shape memory (SM) material that provides a phase change temperature <273 K, a transformation range <40 K, and a hysteresis of <10 K. A bias spring is between the first member and the second member. At the phase change the switch provides a distance change (displacement) between first and second member by at least 1 mm, such as 2 to 4 mm.

  2. The Fecal Microbiota Profile and Bronchiolitis in Infants.

    Science.gov (United States)

    Hasegawa, Kohei; Linnemann, Rachel W; Mansbach, Jonathan M; Ajami, Nadim J; Espinola, Janice A; Petrosino, Joseph F; Piedra, Pedro A; Stevenson, Michelle D; Sullivan, Ashley F; Thompson, Amy D; Camargo, Carlos A

    2016-07-01

    Little is known about the association of gut microbiota, a potentially modifiable factor, with bronchiolitis in infants. We aimed to determine the association of fecal microbiota with bronchiolitis in infants. We conducted a case-control study. As a part of multicenter prospective study, we collected stool samples from 40 infants hospitalized with bronchiolitis. We concurrently enrolled 115 age-matched healthy controls. By applying 16S rRNA gene sequencing and an unbiased clustering approach to these 155 fecal samples, we identified microbiota profiles and determined the association of microbiota profiles with likelihood of bronchiolitis. Overall, the median age was 3 months, 55% were male, and 54% were non-Hispanic white. Unbiased clustering of fecal microbiota identified 4 distinct profiles: Escherichia-dominant profile (30%), Bifidobacterium-dominant profile (21%), Enterobacter/Veillonella-dominant profile (22%), and Bacteroides-dominant profile (28%). The proportion of bronchiolitis was lowest in infants with the Enterobacter/Veillonella-dominant profile (15%) and highest in the Bacteroides-dominant profile (44%), corresponding to an odds ratio of 4.59 (95% confidence interval, 1.58-15.5; P = .008). In the multivariable model, the significant association between the Bacteroides-dominant profile and a greater likelihood of bronchiolitis persisted (odds ratio for comparison with the Enterobacter/Veillonella-dominant profile, 4.24; 95% confidence interval, 1.56-12.0; P = .005). In contrast, the likelihood of bronchiolitis in infants with the Escherichia-dominant or Bifidobacterium-dominant profile was not significantly different compared with those with the Enterobacter/Veillonella-dominant profile. In this case-control study, we identified 4 distinct fecal microbiota profiles in infants. The Bacteroides-dominant profile was associated with a higher likelihood of bronchiolitis. Copyright © 2016 by the American Academy of Pediatrics.

  3. Conduction mechanism in boron carbide

    Science.gov (United States)

    Wood, C.; Emin, D.

    1984-01-01

    Electrical conductivity, Seebeck-coefficient, and Hall-effect measurements have been made on single-phase boron carbides, B(1-x)C(x), in the compositional range from 0.1 to 0.2 X, and between room temperature and 1273 K. The results indicate that the predominant conduction mechanism is small-polaron hopping between carbon atoms at geometrically inequivalent sites.

  4. Good Conduct in the Sciences

    DEFF Research Database (Denmark)

    Hansen, Vagn Lundsgaard

    2006-01-01

    What is scientific dishonesty? How to handle the problem? How to prevent it? These three questions are discussed in an international perspective, focusing on ways of achieving and maintaining good conduct in the sciences.......What is scientific dishonesty? How to handle the problem? How to prevent it? These three questions are discussed in an international perspective, focusing on ways of achieving and maintaining good conduct in the sciences....

  5. Anisotropic heat conduction in diacetylenes

    Science.gov (United States)

    Morelli, D. T.; Heremans, J.; Sakamoto, M.; Uher, C.

    1986-08-01

    Measurements of the low-temperature thermal conductivity of diacetylene single crystals are reported. Monomer samples show little anisotropy and display the temperature dependence of a crystalline dielectric. In polymerized samples, heat is conducted up to 60 times better parallel to the chains than perpendicular to them. Dislocations can account for this anisotropy at the lowest temperatures. Quasi one dimensionality of the polymer crystals induces anisotropy at higher temperatures and strongly suppresses anharmonic phonon interactions.

  6. Do dialysate conductivity measurements provide conductivity clearance or ionic dialysance?

    Science.gov (United States)

    Petitclerc, T

    2006-11-01

    Dialysate conductivity measurements allow on-line estimation of urea clearance during hemodialysis session. Conductivity measurements provide a value of 'conductivity clearance' for some authors, but a value of 'ionic dialysance' for others. This paper aims at explaining which term should be the more appropriate. Clearance is a parameter defined for measuring the power of a mechanism, which aims at 'clearing' a solution by depurating some solutes. In hemodialysis, clearance measures the efficacy of patient's depuration. In contrast, dialysance measures the capability of transferring solutes between blood and dialysate. The conventional definition of dialysance, requiring the absence of convective transfer, should be generalized to the case of the usual presence of ultrafiltration during the hemodialysis session. For a solute (as urea) absent from the dialysate delivered to the dialyzer inlet, the clearance is equal to its dialysance. In order to avoid a dramatic fall in ionic concentrations during hemodialysis treatment, the clearance of ions is reduced by adding these ions in the dialysate and becomes lower than their dialysance. Conductivity measurements provide a value of electrolytes dialysance. Thus the term of 'ionic dialysance' is more appropriate than the term of 'conductivity clearance'. Nevertheless ionic dialysance represents a good estimation of urea clearance.

  7. Studies on Nanocomposite Conducting Coatings

    Directory of Open Access Journals (Sweden)

    Amitava Bhattacharyya

    2013-01-01

    Full Text Available Nanocomposite conducting coatings can impart stable surface electrical conductivity on the substrate. In this paper, carbon nanofiber (CNF and nanographite (NG are dispersed in thermoplastic polyurethane matrix and coated on the surface of glass and polyethylene terephthalate (PET film. The nanoparticles dispersion was studied under TEM. The coating thicknesses were estimated. Further, their resistance and impedance were measured. It has been observed that the 5 wt% CNF dispersed nanocomposite coatings show good conductivity. The use of NG can bring down the amount of CNF; however, NG alone has failed to show significant improvement in conductivity. The nanocomposite coating on PET film using 2.5 wt% of both CNF and NG gives frequency-independent impedance which indicates conducting network formation by the nanoparticles. The study was carried out at different test distances on nanocomposite coated PET films to observe the linearity and continuity of the conducting network, and the result shows reasonable linearity in impedance over total test length (from 0.5 cm to 4.5 cm. The impedance of nanocomposite coatings on glass is not frequency independent and also not following linear increase path with distance. This indicates that the dispersion uniformity is not maintained in the coating solution when it was coated on glass.

  8. Impulse propagation in a conducting medium with arbitrary thermal conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Myasnikov, S.P.

    1977-07-01

    An examination is made of impulse propagation in a conducting medium that accounts for its thermal conductivity. Such a medium, even with an infinitely large electric conductivity, will have a weak dispersion. Following dispersion through a sufficiently large time interval, out of the entire set of planar waves comprising a wave packet, only the low-frequency components were shown to remain (these are the components that are propagated at a velocity of c/sub s/) along with the high-frequency components that are propagated at the speed of c/sub T/. Consequently, the initial derangement is converted into two separate waves of a bell-shaped form that run to various sides at a phase velocity equal to the adiabatic speed of sound c/sub s/. 6 references.

  9. Air conducted and body conducted sound produced by own voice

    DEFF Research Database (Denmark)

    Hansen, Mie Østergaard

    1998-01-01

    When we speak, sound reaches our ears both through the air, from the mouth to ear, and through our body, as vibrations. The ratio between the air borne and body conducted sound has been studied in a pilot experiment where the air borne sound was eliminated by isolating the ear with a large...

  10. Conductance measurements on bismuth nanobridges

    Energy Technology Data Exchange (ETDEWEB)

    Pernau, H.F.; Schirm, C.; Scheer, E. [Univ. of Konstanz (Germany) Dept. of Physics

    2007-07-01

    By electron beam lithography and reactive ion etching we fabricate freestanding metallic bismuth nano-bridges which serve as starting point for arranging atomic-size and tunnel contacts with the help of the mechanically controlled breakjunction technique. Since the bridges are broken in cryogenic vacuum, the contacts are free of oxygen or other contamination. The transport measurements are performed in a {sup 3}He cryostat in the temperature range from 0.25 K up to 2 K and in transverse magnetic fields up to 8 T. After determining the preferred conductance values by recording conductance histograms, we study the conductance as a function of temperature, bias voltage and magnetic field at various contact values corresponding to those preferred conductance values. We observe reproducible conductance fluctuations as a function of both bias voltage and magnetic field and a well pronounced zero-bias anomaly which is modulated periodically with the magnetic field. We interprete our data in terms of phase coherent transport and onsetting superconductivity due to the granular structure of the film. (orig.)

  11. Electrical conductivity of chondritic meteorites

    Science.gov (United States)

    Duba, AL; Didwall, E. M.; Burke, G. J.; Sonett, C. P.

    1987-01-01

    The electrical conductivity of samples of the Murchison and Allende carbonaceous chondrites is 4 to 6 orders of magnitude greater than rock forming minerals such as olivine for temperatures up to 700 C. The remarkably high electrical conductivity of these meteorites is attributed to carbon at the grain boundaries. Much of this carbon is produced by pyrolyzation of hydrocarbons at temperatures in excess of 150 C. As the temperature increases, light hydrocarbons are driven off and a carbon-rich residue or char migrates to the grain boundaries enhancing electrical conductivity. Assuming that carbon was present at the grain boundaries in the material which comprised the meteorite parent bodies, the electrical heating of such bodies was calculated as a function of body size and solar distance during a hypothetical T-Tauri phase of the sun. Input conductivity data for the meteorite parent body were the present carbonaceous chondrite values for temperatures up to 840 C and the electrical conductivity values for olivine above 840 C.

  12. Country profile: Hungary

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    Country Profile: Hungary has been prepared as a background document for use by US Government agencies and US businesses interested in becoming involved with the new democracies of Eastern Europe as they pursue sustainable economic development. The focus of the Profile is on energy and highlights information on Hungary's energy supply, demand, and utilization. It identifies patterns of energy usage in the important economic sectors, especially industry, and provides a preliminary assessment for opportunities to improve efficiencies in energy production, distribution and use by introducing more efficient technologies. The use of more efficient technologies would have the added benefit of reducing the environmental impact which, although is not the focus of the report, is an issue that effects energy choices. The Profile also presents considerable economic information, primarily in the context of how economic restructuring may affect energy supply, demand, and the introduction of more efficient technologies.

  13. Country profile: Hungary

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    Country Profile: Hungary has been prepared as a background document for use by US Government agencies and US businesses interested in becoming involved with the new democracies of Eastern Europe as they pursue sustainable economic development. The focus of the Profile is on energy and highlights information on Hungary`s energy supply, demand, and utilization. It identifies patterns of energy usage in the important economic sectors, especially industry, and provides a preliminary assessment for opportunities to improve efficiencies in energy production, distribution and use by introducing more efficient technologies. The use of more efficient technologies would have the added benefit of reducing the environmental impact which, although is not the focus of the report, is an issue that effects energy choices. The Profile also presents considerable economic information, primarily in the context of how economic restructuring may affect energy supply, demand, and the introduction of more efficient technologies.

  14. Detonation Wave Profile

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-12-14

    The Zel’dovich-von Neumann-Doering (ZND) profile of a detonation wave is derived. Two basic assumptions are required: i. An equation of state (EOS) for a partly burned explosive; P(V, e, λ). ii. A burn rate for the reaction progress variable; d/dt λ = R(V, e, λ). For a steady planar detonation wave the reactive flow PDEs can be reduced to ODEs. The detonation wave profile can be determined from an ODE plus algebraic equations for points on the partly burned detonation loci with a specified wave speed. Furthermore, for the CJ detonation speed the end of the reaction zone is sonic. A solution to the reactive flow equations can be constructed with a rarefaction wave following the detonation wave profile. This corresponds to an underdriven detonation wave, and the rarefaction is know as a Taylor wave.

  15. Caracterização hidráulica de um Latossolo vermelho associada à caracterização pedológica do perfil Hydraulic conductivity of a red Latosol (Rhodic ustox associated to the soil profile pedologic characterization

    Directory of Open Access Journals (Sweden)

    Laércio Alves de Carvalho

    2007-08-01

    Full Text Available Desenvolveu-se um estudo avaliando a função K(q pelo método do perfil instantâneo com e sem a suposição de gradiente unitário, observando seu comportamento com relação aos horizontes pedogenéticos, em um Latossolo Vermelho Distrófico argissólico A moderado textura média, localizado no campo experimental da Escola Superior de Agricultura "Luiz de Queiroz", Universidade de São Paulo, 22° 42' 43,3'' S, 47° 37' 10,4'' W, 546 m. A determinação da função foi feita usando tensiômetros com manômetro de mercúrio instalados às profundidades de 0,1m; 0,2m; 0,3m; 0,4m; 0,5m; 0,6m; 0,7m; 0,8m; 0,9m; 1,0m; 1,1m e 1,2m e curvas de retenção determinadas para as mesmas profundidades. A análise dos resultados foi feita pelo teste F de análise de variância ao nível de 5% de probabilidade, testando o paralelismo, a igualdade dos interceptos e a coincidência entre as retas lnK versus q, considerando e não considerando a suposição do gradiente unitário. Foram comparadas as profundidades de 0,2m a 1,1m, bem como as correlações entre as profundidades de cada horizonte pedogenético. Com base na análise dos resultados, pode-se dizer que, com os procedimentos utilizados de delimitação da área para inundação e redistribuição da água, podem ser empregados modelos simples que consideram unitário o gradiente de potencial total e que, pela comparação feita entre as profundidades, a separação do perfil do solo em horizontes pedogenéticos parece seguir a separação em camadas com funções K(q semelhantes, apenas a partir da profundidade de 0,6m.A study was developed evaluating the K(q function by the instantaneous profile method with and without the suposition of unit gradient and with respect to the pedogenetic horizons, in an Oxisol, located at experimental fields of Escola Superior Luiz de Queiroz, University of São Paulo, in Piracicaba (SP 22° 42' 43,3'' S, 47° 37' 10,4'' W, 546m. The determination of the function was

  16. Conductive mechanism in manganite materials

    Science.gov (United States)

    Liu, Xianming; Zhu, Hong; Zhang, Yuheng

    2002-01-01

    We describe a model in which f(T)=M(T)/Mmax represents both the fraction of the itinerant electron density in the double-exchange (DE) theory and the magnetization σ in the current carrier density collapse (CCDC) theory. With this model, we have checked the DE and CCDC theories with our experimental results of the transport behavior. The DE theory yields agreement with the experimental resistivity excellently, in which the conductivity is the sum of the polaronic and itinerant electronic conductivity for the insulator-metal transition regime. The fitting curves of the resistivity by the CCDC theory deviate from the experiment seriously. This might be caused by the improper assumption of the temperature-dependent carrier density and the temperature-independent carrier mobility. Therefore, it is concluded that the DE theory is more suitable to explain the conductive mechanism in perovskite manganites.

  17. Thermal Conductivity of Foam Glass

    DEFF Research Database (Denmark)

    Petersen, Rasmus Rosenlund; König, Jakob; Yue, Yuanzheng

    Due to the increased focus on energy savings and waste recycling foam glass materials have gained increased attention. The production process of foam glass is a potential low-cost recycle option for challenging waste, e.g. CRT glass and industrial waste (fly ash and slags). Foam glass is used...... as thermal insulating material in building and chemical industry. The large volume of gas (porosity 90 – 95%) is the main reason of the low thermal conductivity of the foam glass. If gases with lower thermal conductivity compared to air are entrapped in the glass melt, the derived foam glass will contain...... only closed pores and its overall thermal conductivity will be much lower than that of the foam glass with open pores. In this work we have prepared foam glass using different types of recycled glasses and different kinds of foaming agents. This enabled the formation of foam glasses having gas cells...

  18. Conducting Polymer 3D Microelectrodes

    Directory of Open Access Journals (Sweden)

    Jenny Emnéus

    2010-12-01

    Full Text Available Conducting polymer 3D microelectrodes have been fabricated for possible future neurological applications. A combination of micro-fabrication techniques and chemical polymerization methods has been used to create pillar electrodes in polyaniline and polypyrrole. The thin polymer films obtained showed uniformity and good adhesion to both horizontal and vertical surfaces. Electrodes in combination with metal/conducting polymer materials have been characterized by cyclic voltammetry and the presence of the conducting polymer film has shown to increase the electrochemical activity when compared with electrodes coated with only metal. An electrochemical characterization of gold/polypyrrole electrodes showed exceptional electrochemical behavior and activity. PC12 cells were finally cultured on the investigated materials as a preliminary biocompatibility assessment. These results show that the described electrodes are possibly suitable for future in-vitro neurological measurements.

  19. Conductivities in an anisotropic medium

    Science.gov (United States)

    Khimphun, Sunly; Lee, Bum-Hoon; Park, Chanyong

    2016-10-01

    In order to imitate the anisotropic medium of a condensed matter system, we take into account an Einstein-Maxwell-dilaton-axion model as a dual gravity theory where the anisotropy is caused by different momentum relaxations. This gravity model allows an anisotropic charged black hole solution. On this background, we investigate how the linear responses of vector modes like electric, thermoelectric, and thermal conductivities rely on the anisotropy. We find that the electric conductivity in the low frequency limit shows a Drude peak and that, in the intermediate frequency regime, it reveals the power law behavior. Specifically, when the anisotropy increases, the exponent of the power law becomes smaller. In addition, we find that a critical value for the anisotropy exists at which the dc conductivity reaches to its maximum value.

  20. Low Conductivity Thermal Barrier Coatings

    Science.gov (United States)

    Zhu, Dong-Ming

    2005-01-01

    Thermal barrier coatings will be more aggressively designed to protect gas turbine engine hot-section components in order to meet future engine higher fuel efficiency and lower emission goals. In this presentation, thermal barrier coating development considerations and requirements will be discussed. An experimental approach is established to monitor in real time the thermal conductivity of the coating systems subjected to high-heat-flux, steady-state and cyclic temperature gradients. Advanced low conductivity thermal barrier coatings have also been developed using a multi-component defect clustering approach, and shown to have improved thermal stability. The durability and erosion resistance of low conductivity thermal barrier coatings have been improved utilizing advanced coating architecture design, composition optimization, in conjunction with more sophisticated modeling and design tools.

  1. Conductivities in an anisotropic medium

    CERN Document Server

    Khimphun, Sunly; Park, Chanyong

    2016-01-01

    In order to imitate anisotropic medium of a condensed matter system, we take into account an Einstein-Maxwell-dilaton-axion model as a dual gravity theory where the anisotropy is caused by different momentum relaxations. This gravity model allows an anisotropic charged black hole solution. On this background, we investigate how the linear responses of vector modes like electric, thermoelectric, and thermal conductivities rely on the anisotropy. We find that the electric conductivity in low frequency limit shows a Drude peak and that in the intermediate frequency regime it reveals the power law behavior. Especially, when the anisotropy increases the exponent of the power law becomes smaller. In addition, we find that there exist a critical value for the anisotropy at which the DC conductivity reaches to its maximum value.

  2. Heat transmission between a profiled nanowire and a thermal bath

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, Christophe; Heron, Jean-Savin; Fournier, Thierry; Bourgeois, Olivier [Institut NÉEL, CNRS, 25 Avenue des Martyrs, F-38042 Grenoble (France); Inst NEEL, Univ. Grenoble Alpes, F-38042 Grenoble (France)

    2014-07-28

    Thermal transport through profiled and abrupt contacts between a nanowire and a reservoir has been investigated by thermal conductance measurements. It is demonstrated that above 1 K the transmission coefficients are identical between abrupt and profiled junctions. This shows that the thermal transport is principally governed by the nanowire itself rather than by the resistance of the thermal contact. These results are perfectly compatible with the previous theoretical models. The thermal conductance measured at sub-Kelvin temperatures is discussed in relation to the universal value of the quantum of thermal conductance.

  3. Global electricity company profiles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    Global Electricity Company Profiles examines the operations and strategies of 60 of the leading electricity companies in the world. Through its analysis of the key players, the report provides a comprehensive review of the current state of the global electricity industry. Using electricity sales as its criteria, the most successful companies are compared in terms of their national, regional and global importance. Global Electricity Company Profiles provides an outline of each company, its structure and operations, as well as key financial data. The detailed performance benchmarking and review of expectations for future development for each individual company provide a wealth of invaluable strategic information not available elsewhere. (author)

  4. Electric Conductivity of Phosphorus Nanowires

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jing-Xiang; LI Hui; ZHANG Xue-Qing; LIEW Kim-Meow

    2009-01-01

    We present the structures and electrical transport properties of nanowires made from different strands of phosphorus chains encapsulated in carbon nanotubes. Optimized by density function theory, our results indicate that the conductance spectra reveal an oscillation dependence on the size of wires. It can be seen from the density of states and current-voltage curves that the structure of nanowires affects their properties greatly. Among them,the DNA-like double-helical phosphorus nanowire exhibits the distinct characteristic of an approximately linear I - V relationship and has a higher conductance than others. The transport properties of phosphorus nanowires are highly correlated with their microstructures.

  5. Electroosmosis in conducting nanofluidic channels

    CERN Document Server

    Zhao, Cunlu

    2010-01-01

    Theoretical modeling of electroosmosis through conducting (ideally polarizable) nanochannels is reported. Based on the theory of induced charge electrokinetics, a novel nanofluidic system which possesses both adjustable ion selective characteristics and flexible flow control is proposed. Such nanofluidic devices operate only with very low gate control voltage applied on the conductive walls of nanochannels, and thus even can be energized by normal batteries. We believe that it is possible to use such metal-electrolyte configurations to overcome the difficulties met with conventional metal-isolator-electrolyte systems for nanofluidic applications.

  6. Selected soil thermal conductivity models

    Directory of Open Access Journals (Sweden)

    Rerak Monika

    2017-01-01

    Full Text Available The paper presents collected from the literature models of soil thermal conductivity. This is a very important parameter, which allows one to assess how much heat can be transferred from the underground power cables through the soil. The models are presented in table form, thus when the properties of the soil are given, it is possible to select the most accurate method of calculating its thermal conductivity. Precise determination of this parameter results in designing the cable line in such a way that it does not occur the process of cable overheating.

  7. Profile characteristics of fake Twitter accounts

    Directory of Open Access Journals (Sweden)

    Supraja Gurajala

    2016-10-01

    Full Text Available In online social networks, the audience size commanded by an organization or an individual is a critical measure of that entity’s popularity and this measure has important economic and/or political implications. Such efforts to measure popularity of users or exploit knowledge about their audience are complicated by the presence of fake profiles on these networks. In this study, analysis of 62 million publicly available Twitter user profiles was conducted and a strategy to identify automatically generated fake profiles was established. Using a combination of a pattern-matching algorithm on screen-names and an analysis of update times, a reasonable number (∼0.1% of total users of highly reliable fake user accounts were identified. Analysis of profile creation times and URLs of these fake accounts revealed their distinct behavior relative to a ground truth data set. The characteristics of friends and followers of users in the two data sets further revealed the very different nature of the two groups. The ratio of number of followers-to-friends for ground truth users was ∼1, consistent with past observations, while the fake profiles had a median ratio ∼30, indicating that the fake users we identified were primarily focused on gathering friends. An analysis of the temporal evolution of accounts over 2 years showed that the friends-to-followers ratio increased over time for fake profiles while they decreased for ground truth users. Our results, thus, suggest that a profile-based approach can be used for identifying a core set of fake online social network users in a time-efficient manner.

  8. New constraints on Earth’s radial conductivity structure

    DEFF Research Database (Denmark)

    Püthe, C.; Kuvshinov, A.; Olsen, Nils

    2014-01-01

    We present a new model of Earth’s radial (1-D) conductivity structure at depths between 10 km and the core-mantle boundary. It is based on CM5, the latest version in the Comprehensive Model series that has been derived using 13 years (September 2000 to September 2013) of magnetic data collected...... predictions of the core, lithospheric and ionospheric field contributions as given by CM5 from the observations, we determine time series of the dominating external and induced SHE coefficients of the magnetic potential due to the magnetospheric ring current. Scalar Q-responses are estimated from...... method. The Hessian matrix of the misfit function, which is derived analytically, is used to estimate confidence limits for the conductivity of each layer. The resulting conductivity-depth profile is compared to 1-D conductivity models of Earth’s mantle recovered in previous studies....

  9. Clinicopathologic Profile of Bronchogenic Carcinoma

    Directory of Open Access Journals (Sweden)

    SG Shrestha

    2010-06-01

    Full Text Available INTRODUCTION: Bronchogenic carcinoma is the most common cancer in the world. It can present in many ways. Accurate diagnosis and categorization into different types is important because of its effect on prognosis and management. We conducted this study to find out the frequency of various histological types of bronchogenic carcinoma and correlate with their clinicopathologic profile. METHODS: This is a retrospective study conducted in 174 histopathologically proven cases of bronchogenic carcinoma that were referred from different parts of the country to a private hospital in Kathmandu over a period of 4 years. RESULTS: The mean age of the patients developing bronchogenic carcinoma was 64 years. Squamous cell carcinoma was the commonest histologic subtype followed by small cell carcinoma. Adenocarcinoma was more common in females. Clinical history was available in 133 cases. Among them, almost all patients had a history of smoking, the average number of pack years being 39.99. Most of the patients consulted doctor for chief complaint of cough and shortness of breath, the average duration of symptoms being 117.53 days. CONCLUSIONS: The lung cancer must be ruled out in all patients who have persistent signs and symptoms of pulmonary disease with a history of smoking. KEYWORDS: bronchogenic, histopathology, smoking.

  10. Force dependent metalloprotein conductance by conducting atomic force microscopy

    Science.gov (United States)

    Zhao, Jianwei; Davis, Jason J.

    2003-09-01

    Our ability to analyse charge transport through a biological macromolecule, pertinent to our understanding not only of biological redox processes but also, for example, to our interpretation of tunnelling imaging, remains a significant practical and theoretical issue. Though much information can be gained by carrying out such examinations at a molecular level, there exist few methods where such controlled analyses are, in fact, feasible. Here we report on the electron transport characteristics of a blue copper metalloprotein as characterized at a refined level by conductive-probe atomic force microscopy. The modulation of this conductance with compressional force has also been examined. Though highly resistive, observations are consistent with the ability of the protein matrix to mediate appreciable tunnelling current. This work, then, paves the way for designed implementation of biomacromolecules into electronic devices.

  11. Hybrid Silicon Nanostructures with Conductive Ligands and Their Microscopic Conductivity

    Science.gov (United States)

    Bian, Tiezheng; Peck, Jamie N.; Cottrell, Stephen P.; Jayasooriya, Upali A.; Chao, Yimin

    2016-09-01

    Silicon nanoparticles (SiNPs) functionalized with conjugated molecules are a promising potential pathway for generating an alternative category of thermoelectric materials. While the thermoelectric performance of materials based on phenylacetylene-capped SiNPs has been proven, their low conductivity is still a problem for their general application. A muon study of phenylacetylene-capped SiNPs was recently carried out using the HIFI spectrometer at the Rutherford Appleton Laboratory, measuring the avoided level-crossing spectra as a function of temperature. The results show a reduction in the measured line width of the resonance above room temperature, suggesting an activated behaviour for this system. This study shows that the muon study could be a powerful method for investigating microscopic conductivity of hybrid thermoelectric materials.

  12. DC electrical conductivity study of cerium doped conducting glass systems

    Science.gov (United States)

    Barde, R. V.; Waghuley, S. A.

    2013-06-01

    The glass samples of composition 60V2O5-5P2O5-(35-x)B2O3-xCeO2, (1 ≤ x ≤ 5) were prepared by the conventional melt quench method. The samples were characterized by X-ray diffraction and thermo gravimetric-differential thermal analysis. The glass transition temperature and crystallization temperature determined from TG-DTA analysis. The DC electrical conductivity has been carried out in the temperature range 303-473 K. The maximum conductivity and minimum activation energy were found to be 0.039 Scm-1 and 0.15 eV at 473 K for x=1, respectively.

  13. Electrical Conductivity in Transition Metals

    Science.gov (United States)

    Talbot, Christopher; Vickneson, Kishanda

    2013-01-01

    The aim of this "Science Note" is to describe how to test the electron-sea model to determine whether it accurately predicts relative electrical conductivity for first-row transition metals. In the electron-sea model, a metal crystal is viewed as a three-dimensional array of metal cations immersed in a sea of delocalised valence…

  14. Conductive Polymers via Reactive Aligomer.

    Science.gov (United States)

    1987-01-30

    properties are presumably due to the formation of dibenzothiophene units 7 .! 9 NADC-87038-60 and intermolecular crosslinking(1 6). Frommer and...2), 280, (1984). 17. J.E. Frommer and R.R. Chance, "Electrically Conductive Polymers", Encycoedia of Polymer Science and Engineering. V. 5, Second

  15. Conducting Simulation Studies in Psychometrics

    Science.gov (United States)

    Feinberg, Richard A.; Rubright, Jonathan D.

    2016-01-01

    Simulation studies are fundamental to psychometric discourse and play a crucial role in operational and academic research. Yet, resources for psychometricians interested in conducting simulations are scarce. This Instructional Topics in Educational Measurement Series (ITEMS) module is meant to address this deficiency by providing a comprehensive…

  16. Conducting miller-urey experiments

    National Research Council Canada - National Science Library

    Parker, Eric T; Cleaves, James H; Burton, Aaron S; Glavin, Daniel P; Dworkin, Jason P; Zhou, Manshui; Bada, Jeffrey L; Fernández, Facundo M

    2014-01-01

    ... the water was simultaneously heated. The purpose of this manuscript is to provide the reader with a general experimental protocol that can be used to conduct a Miller-Urey type spark discharge experiment, using a simplified 3 L reaction flask...

  17. Supporting planning and conducting experiments

    NARCIS (Netherlands)

    Riesen, van Siswa A.N.; Gijlers, Hannie; Anjewierden, Anjo; Jong, de Ton

    2016-01-01

    In inquiry learning learners design and conduct experiments. Learners experience difficulties with the involved processes and need guidance to design useful experiments. To guide students in this we created a configurable experiment design tool that is usable in multiple domains. The tool was tested

  18. How to Conduct Ethnographic Research

    Science.gov (United States)

    Sangasubana, Nisaratana

    2011-01-01

    The purpose of this paper is to describe the process of conducting ethnographic research. Methodology definition and key characteristics are given. The stages of the research process are described including preparation, data gathering and recording, and analysis. Important issues such as reliability and validity are also discussed.

  19. Heat conduction in three dimensions

    Science.gov (United States)

    Danza, T. M.; Fesler, L. W.; Mongan, R. D.

    1980-01-01

    Multidimensional heat conduction program computes transient temperature history and steady state temperatures of complex body geometries in three dimensions. Emphasis is placed on type of problems associated with Space Shuttle thermal protection system, but program could be used in thermal analysis of most three dimensional systems.

  20. Supporting planning and conducting experiments

    NARCIS (Netherlands)

    van Riesen, Siswa; Gijlers, Aaltje H.; Anjewierden, Anjo Allert; de Jong, Anthonius J.M.; Looi, Chee-Kit; Polman, Joseph; Cress, Ulrike; Reimann, Peter

    2016-01-01

    In inquiry learning learners design and conduct experiments. Learners experience difficulties with the involved processes and need guidance to design useful experiments. To guide students in this we created a configurable experiment design tool that is usable in multiple domains. The tool was tested

  1. Thermal radiation of conducting nanoparticles

    CERN Document Server

    Martynenko, Y V; Martynenko, Yu. V.

    2005-01-01

    A simple and universal criterion was obtained for the thermal radiation energy loss efficiency by small conductive particles which include along with metals and graphite also most practically important metal carbides like tungsten carbide, titanium carbide and the number of others.

  2. Fluctuation conductivity in cuprate superconductors

    Indian Academy of Sciences (India)

    S N Bhatia

    2002-05-01

    We have measured the in-plane resistivity of Bi2Sr2CaCu2O8+ and Tl2Ba2CaCu2O8+ single crystals in the temperature range 70–300 K. The thermodynamic fluctuations in the conductivity of both the samples start around ∼ 125 K. We find the Lawrence and Doniach [1] model to be inadequate to describe the fluctuation conductivity in these materials. The modification suggested by Ramallo et al [4] where by the conductivity is enhanced due to the presence of two superconducting layers in each unit cell is also not adequate. We suggest the fluctuation conductivity to be reduced due to the reduction in the density of states (DOS) of the quasiparticles which results due to the formation of Cooper pairs at the onset of the fluctuations. The data agrees with the theory proposed by Dorin et al [5] which takes into account this reduction in DOS.

  3. Heat conduction in three dimensions

    Science.gov (United States)

    Danza, T. M.; Fesler, L. W.; Mongan, R. D.

    1980-01-01

    Multidimensional heat conduction program computes transient temperature history and steady state temperatures of complex body geometries in three dimensions. Emphasis is placed on type of problems associated with Space Shuttle thermal protection system, but program could be used in thermal analysis of most three dimensional systems.

  4. Characterization and Conduction Mechanism of Highly Conductive Vanadate Glass

    Directory of Open Access Journals (Sweden)

    Tetsuaki Nishida

    2015-12-01

    Full Text Available This paper reviews recent studies of highly conductive barium iron vanadate glass with a composition of 20 BaO ∙ 10 Fe2O3 ∙ 70 V2O5 (in mol %. Isothermal annealing of the vanadate glass for several ten minutes at a given temperature, higher than glass transition temperature or crystallization temperature, caused an increase in σ. Substitution of CuI (3d10, ZnII (3d10 and CuII (3d9 for FeIII (3d5 was investigated to elucidate the effect of electron configuration on the conductivity (σ. A marked decrease in the activation energy of conduction (Ea was also observed after the annealing. Values of Ea were correlated to the energy gap between the donor level and the conduction band (CB in the n-type semiconductor model. Isothermal annealing of ZnII-substituted vanadate glass (20 BaO ∙ 5 ZnO ∙ 5 Fe2O3 ∙ 70 V2O5 at 450 °C for 30 min showed an increase in σ from 2.5 × 10–6 to 2.1 × 10–1 S cm–1, which was one order of magnitude larger than that of non-substituted vanadate glass (3.4 × 10–2 S cm–1. Under the same annealing condition, σ’s of 2.0 × 10–1 and 3.2 × 10–1 S cm–1 were observed for 20 BaO ∙ 5 Cu2O ∙ 5 Fe2O3 ∙ 70 V2O5 and 20 BaO ∙ 5 CuO ∙ 5 Fe2O3 ∙ 70 V2O5 glasses, respectively. These results demonstrate an increase in the carrier (electron density in the CB, primarily composed of anti-bonding 4s-orbitals.

  5. Country Profiles, Pakistan.

    Science.gov (United States)

    Hardee, J. Gilbert; Satterthwaite, Adaline P.

    A profile of Pakistan is sketched in this paper. Emphasis is placed on the nature, scope, and accomplishments of population activities in the country. Topics and sub-topics include: location and description of the country; population (size, growth patterns, age structure, urban/rural distribution, ethnic and religious composition, migration,…

  6. Sensing the wind profile

    DEFF Research Database (Denmark)

    Pena Diaz, Alfredo

    prole. The boundary-layer height is derived in nearneutral and stable conditions based on turbulent momentum uxes only and in unstable conditions based on profiles of aerosol backscatter from ceilometer measurements. The lidar measuring technique is used to estimate momentum flux, showing high agreement...

  7. A temperature profiler

    Digital Repository Service at National Institute of Oceanography (India)

    Peshwe, V.B.; Desa, E.

    An instrument developed for measuring temperature profiles at sea in depth or time scales is described. PC-based programming offers flexibility in setting up the instrument for the mode of operation prior to each cast. A real time clock built...

  8. A Danish Profiling System

    DEFF Research Database (Denmark)

    Rosholm, Michael; Staghøj, Jonas; Svarer, Michael;

    2006-01-01

    This paper describes the statistical model used for profiling new unemployed workers in Denmark. When a worker – during his or her first six months in unemployment – enters the employment office for the first time, this model predicts whether or not he or she will be unemployed for more than six ...

  9. Country Education Profiles: Algeria.

    Science.gov (United States)

    International Bureau of Education, Geneva (Switzerland).

    One of a series of profiles prepared by the Cooperative Educational Abstracting Service, this brief outline provides basic background information on educational principles, system of administration, structure and organization, curricula, and teacher training in Algeria. Statistics provided by the Unesco Office of Statistics show enrollment at all…

  10. Country Profiles, Malaysia.

    Science.gov (United States)

    Marzuki, Ariffin Bin; Peng, J. Y.

    A profile of Malaysia is sketched in this paper. Emphasis is placed on the nature, scope, and accomplishments of population activities in the country. Topics and sub-topics include: location and description of the country; population (size, growth patterns, age structure, urban/rural distribution, ethnic and religious composition, migration,…

  11. English Teaching Profile: Mexico.

    Science.gov (United States)

    British Council, London (England). English Language and Literature Div.

    This profile of the English language teaching situation in Mexico examines the role of English in society and in the educational system. It is noted that the extent to which English is used in Mexico is affected by the country's proximity to the United States. The educational system is described, with emphasis on English instruction which begins…

  12. Geographic profiling survey

    NARCIS (Netherlands)

    Emeno, Karla; Bennell, Craig; Snook, Brent; Taylor, Paul Jonathon

    Geographic profiling (GP) is an investigative technique that involves predicting a serial offender?s home location (or some other anchor point) based on where he or she committed a crime. Although the use of GP in police investigations appears to be on the rise, little is known about the procedure

  13. COMPENDEX Profile Adjustment Manual.

    Science.gov (United States)

    Standera, Oldrich

    If an information system is to survive, the users must be satisfied that it meets their needs promptly and consistently. It is essential to react quickly to any undesired result such as an extemely high or low output, too low a relevance or recall, or both. The search editor should feel responsbile not only for the profile setup but also for its…

  14. Electrically Conductive Anodized Aluminum Surfaces

    Science.gov (United States)

    Nguyen, Trung Hung

    2006-01-01

    Anodized aluminum components can be treated to make them sufficiently electrically conductive to suppress discharges of static electricity. The treatment was conceived as a means of preventing static electric discharges on exterior satin-anodized aluminum (SAA) surfaces of spacecraft without adversely affecting the thermal-control/optical properties of the SAA and without need to apply electrically conductive paints, which eventually peel off in the harsh environment of outer space. The treatment can also be used to impart electrical conductivity to anodized housings of computers, medical electronic instruments, telephoneexchange equipment, and other terrestrial electronic equipment vulnerable to electrostatic discharge. The electrical resistivity of a typical anodized aluminum surface layer lies between 10(exp 11) and 10(exp 13) Omega-cm. To suppress electrostatic discharge, it is necessary to reduce the electrical resistivity significantly - preferably to anodized surface becomes covered and the pores in the surface filled with a transparent, electrically conductive metal oxide nanocomposite. Filling the pores with the nanocomposite reduces the transverse electrical resistivity and, in the original intended outer-space application, the exterior covering portion of the nanocomposite would afford the requisite electrical contact with the outer-space plasma. The electrical resistivity of the nanocomposite can be tailored to a value between 10(exp 7) and 10(exp 12) Omega-cm. Unlike electrically conductive paint, the nanocomposite becomes an integral part of the anodized aluminum substrate, without need for adhesive bonding material and without risk of subsequent peeling. The electrodeposition process is compatible with commercial anodizing production lines. At present, the electronics industry uses expensive, exotic, electrostaticdischarge- suppressing finishes: examples include silver impregnated anodized, black electroless nickel, black chrome, and black copper. In

  15. Thermal Conductivity of Diamond Composites

    Directory of Open Access Journals (Sweden)

    Fedor M. Shakhov

    2009-12-01

    Full Text Available A major problem challenging specialists in present-day materials sciences is the development of compact, cheap to fabricate heat sinks for electronic devices, primarily for computer processors, semiconductor lasers, high-power microchips, and electronics components. The materials currently used for heat sinks of such devices are aluminum and copper, with thermal conductivities of about 250 W/(m·K and 400 W/(m·K, respectively. Significantly, the thermal expansion coefficient of metals differs markedly from those of the materials employed in semiconductor electronics (mostly silicon; one should add here the low electrical resistivity metals possess. By contrast, natural single-crystal diamond is known to feature the highest thermal conductivity of all the bulk materials studied thus far, as high as 2,200 W/(m·K. Needless to say, it cannot be applied in heat removal technology because of high cost. Recently, SiC- and AlN-based ceramics have started enjoying wide use as heat sink materials; the thermal conductivity of such composites, however, is inferior to that of metals by nearly a factor two. This prompts a challenging scientific problem to develop diamond-based composites with thermal characteristics superior to those of aluminum and copper, adjustable thermal expansion coefficient, low electrical conductivity and a moderate cost, below that of the natural single-crystal diamond. The present review addresses this problem and appraises the results reached by now in studying the possibility of developing composites in diamond-containing systems with a view of obtaining materials with a high thermal conductivity.

  16. Dielectric properties of conductive ionomers

    Science.gov (United States)

    Klein, Robert James

    Ion and polymer dynamics of ion-containing polymers were investigated, with the majority of results obtained from application of a physical model of electrode polarization (EP) to dielectric spectroscopy data. The physical model of MacDonald, further developed by Coelho, was extended for application to tan delta (the ratio of dielectric loss to dielectric constant) as a function of frequency. The validity of this approach was confirmed by plotting the characteristic EP time as a function of thickness and comparing the actual and predicted unrelaxed dielectric constant for a poly(ethylene oxide) (PEO)-based ionomer neutralized by lithium, sodium, and cesium. Results were obtained for ion mobility and mobile ion concentration for a neat PEO-based ionomer, two (methoxyethoxy-ethoxy phosphazene) (MEEP) -based ionomers, two MEEP-based salt-doped polymers, sulfonated polystyrene (SPS) neutralized by sodium with a high sulfonation fraction, and SPS neutralized by zinc with a low sulfonation fraction. Additionally, the conductivity parameters of six plasticized forms of a neat PEO-based ionomer were characterized, but the method apparently failed to correctly evaluate bulk ionic behavior. In all cases except the SPS ionomers ion mobility follows a Vogel-Fulcher-Tammann (VFT) temperature dependence. In all cases, mobile ion concentration follows an Arrhenius temperature dependence. Fitting parameters from these two relationships yielded direct information about the state of ionic diffusion and ion pairing in each system. Combination of these two functionalities predicts a relationship for conductivity that is significantly different than the VFT relation typically used in the literature to fit conductivity. The most outstanding result was the extremely small fraction of ions found to be mobile. For ionomers it can be concluded that the primary reason for low conductivities arises from the low fraction of mobile ions. The local and segmental dynamics of the neat and

  17. High-Thermal-Conductivity Fabrics

    Science.gov (United States)

    Chibante, L. P. Felipe

    2012-01-01

    Heat management with common textiles such as nylon and spandex is hindered by the poor thermal conductivity from the skin surface to cooling surfaces. This innovation showed marked improvement in thermal conductivity of the individual fibers and tubing, as well as components assembled from them. The problem is centered on improving the heat removal of the liquid-cooled ventilation garments (LCVGs) used by astronauts. The current design uses an extensive network of water-cooling tubes that introduces bulkiness and discomfort, and increases fatigue. Range of motion and ease of movement are affected as well. The current technology is the same as developed during the Apollo program of the 1960s. Tubing material is hand-threaded through a spandex/nylon mesh layer, in a series of loops throughout the torso and limbs such that there is close, form-fitting contact with the user. Usually, there is a nylon liner layer to improve comfort. Circulating water is chilled by an external heat exchanger (sublimator). The purpose of this innovation is to produce new LCVG components with improved thermal conductivity. This was addressed using nanocomposite engineering incorporating high-thermalconductivity nanoscale fillers in the fabric and tubing components. Specifically, carbon nanotubes were added using normal processing methods such as thermoplastic melt mixing (compounding twin screw extruder) and downstream processing (fiber spinning, tubing extrusion). Fibers were produced as yarns and woven into fabric cloths. The application of isotropic nanofillers can be modeled using a modified Nielsen Model for conductive fillers in a matrix based on Einstein s viscosity model. This is a drop-in technology with no additional equipment needed. The loading is limited by the ability to maintain adequate dispersion. Undispersed materials will plug filtering screens in processing equipment. Generally, the viscosity increases were acceptable, and allowed the filled polymers to still be

  18. Fetal Biophysical Profile Scoring

    Directory of Open Access Journals (Sweden)

    H.R. HaghighatKhah

    2009-01-01

    Full Text Available   "nFetal biophysical profile scoring is a sonographic-based method of fetal assessment first described by Manning and Platt in 1980. "nThe biophysical profile score was developed as a method to integrate real-time observations of the fetus and his/her intrauterine environment in order to more comprehensively assess the fetal condition. These findings must be evaluated in the context of maternal/fetal history (i.e., chronic hypertension, post-dates, intrauterine growth restriction, etc, fetal structural integrity (presence or absence of congenital anomalies, and the functionality of fetal support structures (placental and umbilical cord. For example, acute asphyxia due to placental abruption may result in an absence of the acute variables of the biophysical profile score (fetal breathing movements, fetal movement, fetal tone, and fetal heart rate reactivity with a normal amniotic fluid volume. With post maturity the asphyxial event may be intermittent and chronic resulting in a decrease in amniotic fluid volume, but with the acute variables remaining normal. "nWhile the 5 components of the biophysical profile score have remained unchanged since 1980 (Manning, 1980, the definitions of a normal and abnormal parameter have evolved with increasing experience. "nIn 1984 the definition of oligohydramnios was increased from < 1cm pocket of fluid to < 2.0 x 1.0 cm pocket. Oligohydramnios is now defined as a pocket of amniotic fluid < 2.0 x 2.0 cm (Manning, 1995a "nIf the four ultrasound variables are normal, the accuracy of the biophysical profile score was not found to be significantly improved by adding the non-stress test. As a result, in 1987 the profile score was modified to incorporate the non-stress test only when one of the ultrasound variables was abnormal (Manning 1987. Table 1 outlines the current definitions for quantifying a variable as present or absent. "nEach of the 5 components of the biophysical profile score does not have equal

  19. Improving the firm's environmental conduct

    DEFF Research Database (Denmark)

    Knudsen, Thorbjørn; Koed Madsen, Tage

    2001-01-01

    lead to strategic advantage and, thus, economic gains at the firm level. In view of the great importance of this claim, the purpose of the present article was to apply resource-based insights in order to develop this reasoning further and provide an empirical test of three hypotheses related...... to the claim. Our empirical test filled a gap in previous research and offered evidence in support of this claim as well as support for two related hypotheses developed on the basis of the resource-based view.......  It has recently been argued that growing societal pressures for better environmental conduct could induce environmental innovation, thereby entailing lower costs due to increased value and/or more efficient resource allocation. This has led to the claim that improved environmental conduct may...

  20. Conducting Miller-Urey Experiments

    Science.gov (United States)

    Parker, Eric Thomas; Cleaves, Henderson James; Burton, Aaron S.; Glavin, Daniel P.; Dworkin, Jason; Zhou, Manshui; Bada, Jeffrey L.; Fernandez, Facundo M.

    2014-01-01

    In 1953, Stanley Miller reported the production of biomolecules from simple gaseous starting materials, using apparatus constructed to simulate the primordial Earth's atmosphere-ocean system. Miller introduced 200 ml of water, 100 mmHg of H2, 200mmHg of CH4, and 200mmHg of NH3 into the apparatus, then subjected this mixture, under reflux, to an electric discharge for a week, while the water was simultaneously heated. The purpose of this manuscript is to provide the reader with a general experimental protocol that can be used to conduct a Miller-Urey type spark discharge experiment, using a simplified 3 L reaction flask. Since the experiment involves exposing inflammable gases to a high voltage discharge, it is worth highlighting important steps that reduce the risk of explosion. The general procedures described in this work can be extrapolated to design and conduct a wide variety of electric discharge experiments simulating primitive planetary environments.

  1. Inductive heating of conductive nanoparticles

    CERN Document Server

    Nordebo, Sven

    2016-01-01

    We consider the heating of biological tissue by injecting gold nanoparticles and subjecting the system to an electromagnetic field in the radio frequency spectrum. There are results that indicate that small conducting particles can substantially increase the heating locally and thus provide a method to treat cancer. However, recently there are also other publications that question whether metal nanoparticles can be heated in radiofrequency at all. This paper presents a simplified analysis and some interesting observations regarding the classical electromagnetic background to this effect. Here, it is assumed that the related dipole effects are based solely on conducting nanospheres that are embedded in a surrounding medium. From this point of view it is concluded that the effect of using a capactive coupling i.e., a strong electric field to induce electric dipoles can be disregarded unless the volume fraction of the gold nanoparticles is unrealistically high or if there are some other external electric dipole ...

  2. Conduct of operations implementation plan

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, C.K.; Hall, R.L.

    1991-02-20

    This implementation plan describes the process and provides information and schedules that are necessary to implement and comply with the Department of Energy (DOE) Order 5480.19, {open_quotes}Conduct of Operations{close_quotes} (CoOp). This plan applies to all Pinellas Plant operations and personnel. Generally, this Plan discusses how DOE Order 5480.19 will be implemented at the Pinellas Plant.

  3. Anomalous electronic conductance in quasicrystals

    Science.gov (United States)

    Roche, Stephan; Moulopoulos, Konstantinos

    2000-03-01

    Subtle quantum interference effects in one-dimensional quasicrystals are reported. Quite opposite to their metallic counterparts, quasiperiodic systems are shown to exhibit interesting variations of their conducting properties upon disruption of their long-range order. A sudden phason change in the structure leads to a series of transitions that proceed from extremely simple and regular to highly complex self-similar resistive patterns.

  4. Conducting Service Research that Matters

    OpenAIRE

    Gustafsson, Anders; Aksoy, Lerzan; Brady, Michael; McColl-Kennedy, Janet; Sirianni, Nancy; Witell, Lars; Wünderlich, Nancy V.

    2015-01-01

    Purpose –The purpose of this essay is to encourage the reader to think differently about service related issues, and to strive to conduct service research that makes a transformational impact on individuals, organizations, and society. The authors suggest that service researchers are in an excellent position to develop research that matters by making stronger connections with theory, and elevating purely applied research to research that is higher in both practical relevance and methodolo...

  5. Nerve conduction and electromyography studies.

    Science.gov (United States)

    Kane, N M; Oware, A

    2012-07-01

    Nerve conduction studies (NCS) and electromyography (EMG), often shortened to 'EMGs', are a useful adjunct to clinical examination of the peripheral nervous system and striated skeletal muscle. NCS provide an efficient and rapid method of quantifying nerve conduction velocity (CV) and the amplitude of both sensory nerve action potentials (SNAPs) and compound motor action potentials (cMAPs). The CV reflects speed of propagation of action potentials, by saltatory conduction, along large myelinated axons in a peripheral nerve. The amplitude of SNAPs is in part determined by the number of axons in a sensory nerve, whilst amplitude of cMAPs reflects integrated function of the motor axons, neuromuscular junction and striated muscle. Repetitive nerve stimulation (RNS) can identify defects of neuromuscular junction (NMJ) transmission, pre- or post-synaptic. Needle EMG examination can detect myopathic changes in muscle and signs of denervation. Combinations of these procedures can establish if motor and/or sensory nerve cell bodies or peripheral nerves are damaged (e.g. motor neuronopathy, sensory ganglionopathy or neuropathy), and also indicate if the primary target is the axon or the myelin sheath (i.e. axonal or demyelinating neuropathies). The distribution of nerve damage can be determined as either generalised, multifocal (mononeuropathy multiplex) or focal. The latter often due to compression at the common entrapment sites (such as the carpal tunnel, Guyon's canal, cubital tunnel, radial groove, fibular head and tarsal tunnel, to name but a few of the reported hundred or so 'entrapment neuropathies').

  6. Proton-conducting cerate ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Pederson, L.R.; Coffey, G.W.; Bates, J.L.; Weber, W.J. [Pacific Northwest National Lab., Richland, WA (United States)

    1996-08-01

    Single-cell solid oxide fuel cells were constructed using strontium cerate as the electrolyte and their performance tested. Like certain zirconates, hafnates, and tantalates, the cerate perovskites are among a class of solid electrolytes that conduct protons at elevated temperatures. Depending on the temperature and chemical environment, these ceramics also support electronic and oxygen ion currents. A maximum power output of {approx}100 mW per cm{sup 2} electrolyte surface area was obtained at 900{degrees}C using 4% hydrogen as the fuel and air as the oxidant. A series of rare earth/ceria/zirconia were prepared and their electrical properties characterized. Rare earth dopants included ytterbia, yttria, terbia, and europia. Ionic conductivities were highest for rare earth/ceria and rare earth zirconia compositions; a minimum in ionic conductivity for all series were found for equimolar mixtures of ceria and zirconia. Cerium oxysulfide is of interest in fossil energy applications because of its high chemical stability and refractory nature. An alternative synthesis route to preparing cerium oxysulfide powders has been developed using combustion techniques.

  7. Heat conduction within linear thermoelasticity

    CERN Document Server

    Day, William Alan

    1985-01-01

    J-B. J. FOURIER'S immensely influential treatise Theorie Analytique de la Chaleur [21J, and the subsequent developments and refinements of FOURIER's ideas and methods at the hands of many authors, provide a highly successful theory of heat conduction. According to that theory, the growth or decay of the temperature e in a conducting body is governed by the heat equation, that is, by the parabolic partial differential equation Such has been the influence of FOURIER'S theory, which must forever remain the classical theory in that it sets the standard against which all other theories are to be measured, that the mathematical investigation of heat conduction has come to be regarded as being almost identicalt with the study of the heat equation, and the reader will not need to be reminded that intensive analytical study has t But not entirely; witness, for example, those theories which would replace the heat equation by an equation which implies a finite speed of propagation for the temperature. The reader is refe...

  8. Thermal Conductivity of Humid Air

    Science.gov (United States)

    Beirão, S. G. S.; Ribeiro, A. P. C.; Lourenço, M. J. V.; Santos, F. J. V.; Nieto de Castro, C. A.

    2012-09-01

    In this article, measurements of the thermal conductivity of humid air as a function of pressure, temperature, and mole fraction of water, for pressures up to 5 MPa and temperatures up to 430 K, for different water contents (up to 10 % vapor mole fraction) are reported. Measurements were performed using a transient hot-wire apparatus capable of obtaining data with an uncertainty of 0.8 % for gases. However, as moist air becomes corrosive above 373 K and at pressures >5 MPa, the apparatus, namely, the pressure vessel and the cells had to be modified, by coating all stainless-steel parts with a titanium nitride thin film coating, about 4 μm thick, obtained by physical vapor deposition. The expanded uncertainty (coverage factor k = 2) of the present experimental thermal conductivity data is 1.7 %, while the uncertainty in the mole fraction is estimated to be better than 0.0006. Experimental details regarding the preparation of the samples, the precautions taken to avoid condensation in the tubes connected to the measuring cell, and the method developed for obtaining reliable values of the water content for the gas mixtures are discussed. A preliminary analysis of the application of the kinetic theory of transport properties in reacting mixtures to interpret the complex dependence of the thermal conductivity of humid air on water composition is addressed.

  9. Thermal Conductivity Of Rubble Piles

    CERN Document Server

    Luan, Jing

    2015-01-01

    Rubble piles are a common feature of solar system bodies. They are composed of monolithic elements of ice or rock bound by gravity. Voids occupy a significant fraction of the volume of a rubble pile. They can exist up to pressure $P\\approx \\epsy\\mu$, where $\\epsy$ is the monolithic material's yield strain and $\\mu$ its rigidity. At low $P$, contacts between neighboring elements are confined to a small fraction of their surface areas. As a result, the effective thermal conductivity of a rubble pile, $\\kcon\\approx k(P/(\\epsy\\mu))^{1/2}$, can be orders of magnitude smaller than, $k$, the thermal conductivity of its monolithic elements. In a fluid-free environment, only radiation can transfer energy across voids. It contributes an additional component, $\\krad=16\\ell\\sigma T^3/3$, to the total effective conductivity, $\\keff=\\kcon +\\krad$. Here $\\ell$, the inverse of the opacity per unit volume, is of order the size of the elements and voids. An important distinction between $\\kcon$ and $\\krad$ is that the former i...

  10. Nonlinear conductivity in silicon nitride

    Science.gov (United States)

    Tuncer, Enis

    2017-08-01

    To better comprehend electrical silicon-package interaction in high voltage applications requires full characterization of the electrical properties of dielectric materials employed in wafer and package level design. Not only the packaging but wafer level dielectrics, i.e. passivation layers, would experience high electric fields generated by the voltage applied pads. In addition the interface between the passivation layer and a mold compound might develop space charge because of the mismatch in electrical properties of the materials. In this contribution electrical properties of a thin silicon nitride (Si3N4) dielectric is reported as a function of temperature and electric field. The measured values later analyzed using different temperature dependent exponential expressions and found that the Mott variable range hopping conduction model was successful to express the data. A full temperature/electric field dependency of conductivity is generated. It was found that the conduction in Si3N4 could be expressed like a field ionization or Fowler-Nordheim mechanism.

  11. CONDUCTIVE CHANNEL FOR ENERGY TRANSMISSION

    Directory of Open Access Journals (Sweden)

    V. V. Apollonov

    2014-01-01

    Full Text Available Laser spark obtained by using a conical optics is much more appropriate to form conducting channels in atmosphere. Only two types of lasers are actively considered to be used in forming high-conductivity channels in atmosphere, controlled by laser spark: pulsed sub-microsecond gas and chemical lasers (CO2, DF and short pulse solid-state and UV lasers. Main advantage of short pulse lasers is their ability in forming of super long ionized channels with a characteristic diameter of ~100  µ  in atmosphere along the  beam propagation direction. At estimated electron densities below  10 ⋅ 16 cm–3 in these filaments and laser wavelengths in the range of 0,5–1,0 mm, the plasma barely absorbs laser radiation.  In this case, the length of the track composed of many filaments is determined by the laser intensity and may reach many kilometers at a femtosecond pulse energy of ~100 mJ. However, these lasers could not be used to form high-conductivity long channels in atmosphere. The ohmic resistance of this type a conducting channels turned out to be very high, and the gas in the channels could not be strongly heated (< 1 J. An electric breakdown controlled by radiation of femtosecond solid-state laser was implemented in only at a length of 3 m with a voltage of 2 MV across the discharge gap (670 kV/m.Not so long ago scientific group from P. N. Lebedev has improved that result, the discharge gap – 1 m had been broken under KrF laser irradiation when switching high-voltage (up to 390 kV/m electric discharge by 100-ns UV pulses. Our previous result  –  16 m long conducting channel controlled by a  laser spark at the voltage  –  3 MV  – was obtained more than 20 years ago in Russia and Japan by using pulsed CO2  laser with energy  –  0,5 kJ. An average electric field strength  was < 190 kV/m. It is still too much for efficient applications.

  12. Soil Temperature and Moisture Profile (STAMP) System Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Cook, David R [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-11-01

    The soil temperature and moisture profile system (STAMP) provides vertical profiles of soil temperature, soil water content (soil-type specific and loam type), plant water availability, soil conductivity, and real dielectric permittivity as a function of depth below the ground surface at half-hourly intervals, and precipitation at one-minute intervals. The profiles are measured directly by in situ probes at all extended facilities of the SGP climate research site. The profiles are derived from measurements of soil energy conductivity. Atmospheric scientists use the data in climate models to determine boundary conditions and to estimate the surface energy flux. The data are also useful to hydrologists, soil scientists, and agricultural scientists for determining the state of the soil. The STAMP system replaced the SWATS system in early 2016.

  13. Nonstationary Heat Conduction in Atomic Systems

    Science.gov (United States)

    Singh, Amit K.

    reproduce the molecular dynamics results for a short-duration heat pulse where wavelike propagation of heat is observed thereby confirming the existence of second sound in argon. Implementations of the TPI method in MATLAB are available as part of the supplementary material. 2. The second major work of the thesis is to look into the following problem. The direct method for computing thermal conductivity in nonequilibrium molecular dynamics gives rise to an artificial Kapitza resistance at the interface between thermostatted and unthermostatted regions. This resistance, which depends on the system size and the thermostat parameters, creates discontinuous jumps in the temperature and heat flux across the interface and therefore affects the measured thermal conductivity. In this part, we propose a phenomenological relation for the Kapitza resistance that can be used to extract a value for the bulk thermal conductivity, which is independent of the system size and thermostat details. We also provide insight into the Kapitza phenomenon resulting from numerical thermostatting. 3. This constitutes our third part of the thesis. Silicon (001) surfaces in non-equilibrium molecular dynamics (NEMD) simulations above a critical transformation temperature undergo a reconstruction from the ideal diamond crystalline surface to a reconstructed structure involving the formation of rows of dimers along a direction. This process is accompanied by latent heat release that in NEMD simulations results in a dramatic increase in temperature of nanobeams that cross the transformation temperature as they are heated. To model this behavior, we propose a hybrid continuum partial differential equation for non-Fourier heat transfer coupled with a stochastic kinetic Monte Carlo (KMC) algorithm to account for latent heat release. An input to the method is the energy barrier for dimerization, which is computed separately using nudged elastic band calculations. The time-dependent temperature profiles along

  14. Profile of success

    DEFF Research Database (Denmark)

    Dahlgaard, Jens Jørn; Nørgaard, Anders; Jakobsen, Søren

    1998-01-01

    What management skills must Europe's business leaders improve to achieve business excellence? Which country's leaders are best placed for success? Does the next generation have what it takes to compete? In the second half of their study of the leadership styles that drive business excellence, Jens...... Dahlgaard, Anders Nørgaard and Søren Jakobsen describe an excellent leadership profile that provides the answers....

  15. Qualitative Value Profiling

    DEFF Research Database (Denmark)

    Duus, Henrik Johannsen; Bjerre, Mogens

    2015-01-01

    Qualitative value profiling (QVP) is a relatively unknown method of strategic analysis for companies in international business-to-business settings. The purpose of QVP is to reduce the information complexity that is faced by international companies in dealing with business partners. The QVP method...... and consequently, for the advancement of international development. Further use of QVP is recommended and suggestions for future research are provided....

  16. High throughput drug profiling

    OpenAIRE

    Entzeroth, Michael; Chapelain, Béatrice; Guilbert, Jacques; Hamon, Valérie

    2000-01-01

    High throughput screening has significantly contributed to advances in drug discovery. The great increase in the number of samples screened has been accompanied by increases in costs and in the data required for the investigated compounds. High throughput profiling addresses the issues of compound selectivity and specificity. It combines conventional screening with data mining technologies to give a full set of data, enabling development candidates to be more fully compared.

  17. Practical Differential Profiling

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, M; De Supinski, B R

    2007-02-04

    Comparing performance profiles from two runs is an essential performance analysis step that users routinely perform. In this work we present eGprof, a tool that facilitates these comparisons through differential profiling inside gprof. We chose this approach, rather than designing a new tool, since gprof is one of the few performance analysis tools accepted and used by a large community of users. eGprof allows users to 'subtract' two performance profiles directly. It also includes callgraph visualization to highlight the differences in graphical form. Along with the design of this tool, we present several case studies that show how eGprof can be used to find and to study the differences of two application executions quickly and hence can aid the user in this most common step in performance analysis. We do this without requiring major changes on the side of the user, the most important factor in guaranteeing the adoption of our tool by code teams.

  18. Wide HI profile galaxies

    CERN Document Server

    Brosch, Noah; Zitrin, Adi

    2011-01-01

    We investigate the nature of objects in a complete sample of 28 galaxies selected from the first sky area fully covered by ALFALFA, being well-detected and having HI profiles wider than 550 km/s. The selection does not use brightness, morphology, or any other property derived from optical or other spectral bands. We investigate the degree of isolation, the morphology, and other properties gathered or derived from open data bases and show that some objects have wide HI profiles probably because they are disturbed or are interacting, or might be confused in the ALFALFA beam. We identify a sub-sample of 14 galaxies lacking immediate interacting neighbours and showing regular, symmetric, two-horned HI profiles that we propose as candidate high-mass disk systems (CHMDs). We measure the net-Halpha emission from the CHMDs and combine this with public multispectral data to model the global star formation (SF) properties of each galaxy. The Halpha observations show SFRs not higher than a few solar masses per year. Sim...

  19. Blood pressure and lipid profiles in adolescents with hypertensive parents

    OpenAIRE

    Julia Fitriany; Rafita Ramayati; Supriatmo Supriatmo; Rusdidjas Rusdidjas; Oke Rina; Rosmayanti Siregar

    2016-01-01

    problem of increasing prevalence and causes high morbidity and mortality. It is found primarily in young males, with a familial history of hypertension and/or cardiovascular disease. Examination of lipid profiles has been used to detect the risk of hypertension in adolescents. Objective To compare blood pressure and lipid profiles in adolescents with and without a parental history of hypertension. Methods This cross-sectional study was conducted from January to Februar...

  20. DIGITAL GEOMETRIC MODELLING OF TEETH PROFILE BY USING CAD METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Krzysztof TWARDOCH

    2014-03-01

    Full Text Available This article is devoted to the problem of properly defining the spatial model of tooth profile with CAD methodologies. Moved by the problem of the accuracy of the mapping defined curves describing the geometry of the teeth. Particular attention was paid to precise geometric modeling involute tooth profile, which has a significant influence on the process of identifying the mesh stiffness for tests performed on the dynamic phenomena occurring in the gear transmission systems conducted using dynamic models

  1. Unified Hamiltonian for conducting polymers

    Science.gov (United States)

    Leitão Botelho, André; Shin, Yongwoo; Li, Minghai; Jiang, Lili; Lin, Xi

    2011-11-01

    Two transferable physical parameters are incorporated into the Su-Schrieffer-Heeger Hamiltonian to model conducting polymers beyond polyacetylene: the parameter γ scales the electron-phonon coupling strength in aromatic rings and the other parameter ɛ specifies the heterogeneous core charges. This generic Hamiltonian predicts the fundamental band gaps of polythiophene, polypyrrole, polyfuran, poly-(p-phenylene), poly-(p-phenylene vinylene), and polyacenes, and their oligomers of all lengths, with an accuracy exceeding time-dependent density functional theory. Its computational costs for moderate-length polymer chains are more than eight orders of magnitude lower than first-principles approaches.

  2. On Vasyliunas's equivalent conductivity formalism

    Science.gov (United States)

    Pontius, D. H., Jr.

    1992-01-01

    The Vasyliunas's (1972) equivalent conductivity formalism (ECF) for representing the coupling of the ionosphere and the magnetosphere is discussed, and a new, simpler, derivation is presented of the ECF, in which certain of the underlying assumptions and their implications are made transparent. The derivation presented indicates that the only role of the ions in the ECF is to insure quasi-neutrality. It is shown that the ECF is not as robust as usually assumed and that caution must be used to insure that reasonable results are obtained.

  3. Water Column Profile Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Southeast Fisheries Science Center Mississippi Laboratories conducts standardized fisheries independent resource surveys in the Gulf of Mexico, South Atlantic,...

  4. Leflunomide : a manageable safety profile

    NARCIS (Netherlands)

    Riel, P.L.C.M. van; Smolen, J.S.; Emery, P.; Kalden, J.R.; Dougados, M.; Strand, C.V.; Breedveld, F.C.

    2004-01-01

    The safety profile of leflunomide in the treatment of rheumatoid arthritis has been well documented in clinical trials, postmarketing surveillance, and epidemiological studies. Both postmarketing surveillance and epidemiological study results are consistent with the safety profile of leflunomide rep

  5. Genre Analysis of Online Company Profiles from Sporting Goods Brands

    Institute of Scientific and Technical Information of China (English)

    WANG Fei

    2015-01-01

    With the development of globalization and information technology, online company profile has been an effective commu⁃nication channel between companies and their target customers or clients. Online company profile, as a specific genre, has the dis⁃tinct features and functions in commercial activities. This study aims to do linguistic study of the constitution and the role of these company profiles about sporting goods for communication on the Internet. To realize it, six company profiles have been selected from the official websites of each sports company. The genre analysis of these samples is conducted from the perspective of Hasan’s Contextual Configuration (CC) and Generic Structure Potential (GSP). This thesis attempts to give the suggestions on how to compose a company profile for readers and sporting companies and the reference for the related researches in the future.

  6. Dynamical conductivity of confined water

    Science.gov (United States)

    Artemov, V. G.

    2017-01-01

    The electrodynamic response of water confined in nanoporous MCM-41 is measured in the frequency range 1 MHz-3 THz at room temperature. The results are analyzed in the context of a recently proposed ionic model of water. We found an increase in dc-conductivity of confined water by 3 orders of magnitude (3.3 · 10-3 Ω-1 · m-1) compared to bulk water (5.5 · 10-6 Ω-1 · m-1). This is attributed to the increase of H3O+ and OH- ion mobility, due to a decrease of the effective potential amplitude by walls of the confining environment. We found that the absorption in the microwave frequency range is much smaller in the medium with confined water than in the bulk water, and the quadratic dependence of the conductivity (σ) on frequency (ω) becomes less steep and tends to σ ~ ω. The results are of fundamental importance and can be used for understanding of the proton transport in systems with water in the nanoconfined state.

  7. Transparent conducting silver nanowire networks

    CERN Document Server

    van de Groep, Jorik; Polman, Albert; 10.1021/nl301045a

    2013-01-01

    We present a transparent conducting electrode composed of a periodic two-dimensional network of silver nanowires. Networks of Ag nanowires are made with wire diameters of 45-110 nm and pitch of 500, 700 and 1000 nm. Anomalous optical transmission is observed, with an averaged transmission up to 91% for the best transmitting network and sheet resistances as low as 6.5 {\\Omega}/sq for the best conducting network. Our most dilute networks show lower sheet resistance and higher optical transmittance than an 80 nm thick layer of ITO sputtered on glass. By comparing measurements and simulations we identify four distinct physical phenomena that govern the transmission of light through the networks: all related to the excitation of localized surface plasmons and surface plasmon polaritons on the wires. The insights given in this paper provide the key guidelines for designing high-transmittance and low-resistance nanowire electrodes for optoelectronic devices, including thin-film solar cells. For these latter, we disc...

  8. Infrared Hall Conductivity in Graphene

    Science.gov (United States)

    Ellis, C. T.; Kim, M.-H.; Wu, T.; Sambandamurthy, G.; Cerne, J.; Lee, V.; Banerjee, S.

    2009-03-01

    Among the many different techniques which have revealed graphene's remarkable properties, infrared conductivity (σxx) (Jiang, PRL 2007) and the DC Hall effect (Novoselov, Nature 2005; Zhang, Nature 2005; Zhang, PRL 2006) have provided new insights into this material. In our study we determine the infrared Hall conductivity (σxy) for graphene in the 120-1000 meV range at temperatures down to 7K and magnetic fields up to 7T using Faraday measurements. Unlike σxx, which measures the sum of the optical responses for left and right circularly polarized light, σxy measures the difference and therefore is sensitive to small changes in symmetry. We compare graphene samples that are prepared using several methods, including cleaving from parent materials such as highly ordered pyrolytic graphite, as well as sonication-assisted solution-phase exfoliation of natural flake graphite powder. The films are then deposited onto Si/SiO2 substrates for infrared measurements. This work is supported by the NSF-CAREER-DMR0449899, also GS and SB thank the UB-IRDF for financial support.

  9. Conduction-coupled Tesla transformer.

    Science.gov (United States)

    Reed, J L

    2015-03-01

    A proof-of-principle Tesla transformer circuit is introduced. The new transformer exhibits the high voltage-high power output signal of shock-excited transformers. The circuit, with specification of proper circuit element values, is capable of obtaining extreme oscillatory voltages. The primary and secondary portions of the circuit communicate solely by conduction. The destructive arcing between the primary and secondary inductors in electromagnetically coupled transformers is ubiquitous. Flashover is eliminated in the new transformer as the high-voltage inductors do not interpenetrate and so do not possess an annular volume of electric field. The inductors are remote from one another. The high voltage secondary inductor is isolated in space, except for a base feed conductor, and obtains earth by its self-capacitance to the surroundings. Governing equations, for the ideal case of no damping, are developed from first principles. Experimental, theoretical, and circuit simulator data are presented for the new transformer. Commercial high-temperature superconductors are discussed as a means to eliminate the counter-intuitive damping due to small primary inductances in both the electromagnetic-coupled and new conduction-coupled transformers.

  10. Scattering characteristics of conducting cylinder coated with nonuniform magnetized ferrite

    Institute of Scientific and Technical Information of China (English)

    Hu Bin-Jie; Edward Yung Kai-Ning; Zhang Jun; Toutain Serge

    2005-01-01

    An analytical technique, referred to as the scattering matrix method (SMM), is developed to analyse the scattering of a planar wave from a conducting cylinder coated with nonuniform magnetized ferrite. The SMM solution for the nonuniform ferrite coating can be reduced to the expressions for the scattering and penetrated coefficients in four particular cases: nonuniform magnetized ferrite cylinder, uniform magnetized ferrite-coated conducting cylinder, uniform ferrite cylinder as well as homogeneous dielectric-coated conducting cylinder. The resonant condition for the nonuniform ferrite coating is obtained. The distinctive differences in scattering between the nonuniform ferrite coating and the nonuniform dielectric coating are demonstrated. The effects of applied magnetic fields and wave frequencies on the scattering characteristics for two types of the linear profiles are revealed.

  11. Hanford Site Ecological Quality Profile

    Energy Technology Data Exchange (ETDEWEB)

    Bilyard, Gordon R.; Sackschewsky, Michael R.; Tzemos, Spyridon

    2002-02-17

    This report reviews the ecological quality profile methodology and results for the Hanford Site. It covers critical ecological assets and terrestrial resources, those in Columbia River corridor and those threatened and engdangered, as well as hazards and risks to terrestrial resources. The features of a base habitat value profile are explained, as are hazard and ecological quality profiles.

  12. Continuous profiling of magnetotelluric fields

    Energy Technology Data Exchange (ETDEWEB)

    Verdin, Carlos Torres [Univ. of California, Berkeley, CA (United States)

    1991-05-01

    The magnetotelluric (MT) method of mapping ground electrical conductivity is traditionally based on measurement of the surface impedance at widely spaced stations to infer models of the subsurface through a suitable pseudo 1-D inverse or with linearized least-squares inversion for 2- or 3-D geoelectric media. It is well known that small near-surface inhomogeneities can produce spatial discontinuities in the measured electric fields over a wide frequency range and may consequently bias the impedance on a very local scale. Inadequate station spacing effectively aliases the electric field measurements and results in distortions that cannot be removed in subsequent processing or modelling. In order to fully exploit the benefits of magnetotellurics in complex geological environments, closely spaced measurements must be used routinely. This thesis entertains an analysis of MT data taken along continuous profiles and is a first step that will allow more encompassing 2-D sampling techniques to become viable in the years to come. The developments presented here are to a large extent motivated by the physical insight gained from low-contrast solutions to the forward MT problem. These solutions describe the relationship between a perturbation in the electrical conductivity of the subsurface and the ensuing perturbation of the MT response as the output of a linear system. Albeit strictly accurate in a limited subset of practical exploration problems, the linearized solutions allow one to pursue a model independent study of the response characteristics of MT data. In fact, these solutions yield simple expressions for 1-,2-, and 3-D resistivity models which are here examined in progressive sequence.

  13. Continuous profiling of magnetotelluric fields

    Energy Technology Data Exchange (ETDEWEB)

    Verdin, C.T.

    1991-05-01

    The magnetotelluric (MT) method of mapping ground electrical conductivity is traditionally based on measurement of the surface impedance at widely spaced stations to infer models of the subsurface through a suitable pseudo 1-D inverse or with linearized least-squares inversion for 2- or 3-D geoelectric media. It is well known that small near-surface inhomogeneities can produce spatial discontinuities in the measured electric fields over a wide frequency range and may consequently bias the impedance on a very local scale. Inadequate station spacing effectively aliases the electric field measurements and results in distortions that cannot be removed in subsequent processing or modelling. In order to fully exploit the benefits of magnetotellurics in complex geological environments, closely spaced measurements must be used routinely. This thesis entertains an analysis of MT data taken along continuous profiles and is a first step that will allow more encompassing 2-D sampling techniques to become viable in the years to come. The developments presented here are to a large extent motivated by the physical insight gained from low-contrast solutions to the forward MT problem. These solutions describe the relationship between a perturbation in the electrical conductivity of the subsurface and the ensuing perturbation of the MT response as the output of a linear system. Albeit strictly accurate in a limited subset of practical exploration problems, the linearized solutions allow one to pursue a model independent study of the response characteristics of MT data. In fact, these solutions yield simple expressions for 1-,2-, and 3-D resistivity models which are here examined in progressive sequence.

  14. Aqueous supercapacitors on conductive cotton

    KAUST Repository

    Pasta, Mauro

    2010-06-01

    Wearable electronics offer the combined advantages of both electronics and fabrics. In this article, we report the fabrication of wearable supercapacitors using cotton fabric as an essential component. Carbon nanotubes are conformally coated onto the cotton fibers, leading to a highly electrically conductive interconnecting network. The porous carbon nanotube coating functions as both active material and current collector in the supercapacitor. Aqueous lithium sulfate is used as the electrolyte in the devices, because it presents no safety concerns for human use. The supercapacitor shows high specific capacitance (~70-80 F·g-1 at 0.1 A·g-1) and cycling stability (negligible decay after 35,000 cycles). The extremely simple design and fabrication process make it applicable for providing power in practical electronic devices. © 2010 Tsinghua University Press and Springer-Verlag Berlin Heidelberg.

  15. Guidelines for conducting geropsychotherapy research.

    Science.gov (United States)

    Areán, Patricia A; Cook, Beth L; Gallagher-Thompson, Dolores; Hegel, Mark T; Schulberg, Herbert C; Schulz, Richard

    2003-01-01

    Geropsychotherapy researchers have established specific methods that improve the reliability and generalizability of the data from this research. To date, there has been little formal dissemination of these methods. The authors present guidelines for the optimal conduct of psychotherapy research in older adults, which include selection of age-appropriate psychotherapies and control conditions, use of consumer-based methods for recruitment, evaluation of age-related treatment processes and outcomes, and adjusting the research design to accommodate age-specific life events and provide examples of how each guideline was used in their psychotherapy studies. Psychotherapy research with older adults has benefited from methodological advances that improve our ability to ascertain the impact of psychotherapy on late-life disorders. However, the field is still in need of better outcome and process measures, methods for measuring the therapeutic content of non-psychotherapy encounters, and methods for determining the impact of choice of treatment on outcome.

  16. Thermal Conductance of Andreev Interferometers

    Science.gov (United States)

    Jiang, Z.; Chandrasekhar, V.

    2005-04-01

    We calculate the thermal conductance GT of diffusive Andreev interferometers, which are hybrid loops with one superconducting arm and one normal-metal arm. The presence of the superconductor suppresses GT; however, unlike a conventional superconductor, GT/GTN does not vanish as the temperature T→0, but saturates at a finite value that depends on the resistance of the normal-superconducting interfaces, and their distance from the path of the temperature gradient. The reduction of GT is determined primarily by the suppression of the density of states in the proximity-coupled normal metal along the path of the temperature gradient. GT is also a strongly nonlinear function of the thermal current, as found in recent experiments.

  17. Electrical Conductivity of the Lower-Mantle Ferropericlase

    Energy Technology Data Exchange (ETDEWEB)

    Lin, J F; Weir, S T; Jackson, D D; Evans, W J; Vohra, Y K; Qiu, W; Yoo, C S

    2007-04-19

    Electrical conductivity of the lower-mantle ferropericlase-(Mg{sub 0.75},Fe{sub 0.25})O has been studied using designer diamond anvils to pressures over one megabar and temperatures up to 500 K. The electrical conductivity of (Mg{sub 0.75},Fe{sub 0.25})O gradually rises by an order of magnitude up to 50 GPa but decreases by a factor of approximately three between 50 to 70 GPa. This decrease in the electrical conductivity is attributed to the electronic high-spin to low-spin transition of iron in ferropericlase. That is, the electronic spin transition of iron results in a decrease in the mobility and/or density of the charge transfer carriers in the low-spin ferropericlase. The activation energy of the low-spin ferropericlase is 0.27 eV at 101 GPa, similar to that of the high-spin ferropericlase at relatively low temperatures. Our results indicate that low-spin ferropericlase exhibits lower electrical conductivity than high-spin ferropericlase, which needs to be considered in future geomagnetic models for the lower mantle. The extrapolated electrical conductivity of the low-spin ferropericlase, together with that of silicate perovskite, at the lower mantle pressure-temperature conditions is consistent with the model electrical conductivity profile of the lower mantle.

  18. GROUP PROFILE Computer Technique

    Directory of Open Access Journals (Sweden)

    Andrey V. Sidorenkov

    2015-01-01

    Full Text Available This article contains a description of the structure, the software and functional capabilities, and the scope and purposes of application of the Group Profile (GP computer technique. This technique rests on a conceptual basis (the microgroup theory, includes 16 new and modified questionnaires, and a unique algorithm, tied to the questionnaires, for identification of informal groups. The GP yields a wide range of data about the group as a whole (47 indices, each informal group (43 indices, and each group member (16 indices. The GP technique can be used to study different types of groups: production (work groups, design teams, military units, etc., academic (school classes, student groups, and sports.

  19. Cohort Profile Update

    DEFF Research Database (Denmark)

    Omland, Lars Haukali; Ahlström, Magnus Glindvad; Obel, Niels

    2014-01-01

    The DHCS is a cohort of all HIV-infected individuals seen in one of the eight Danish HIV centres after 31 December 1994. Here we update the 2009 cohort profile emphasizing the development of the cohort. Every 12-24 months, DHCS is linked with the Danish Civil Registration System (CRS) in order...... of Causes of Death, the Danish National Prescription Registry, the Attainment Register and the Integrated Database for Labour Market Research to get information on vital status, migration, cancer, hospital contacts, causes of death, dispensed prescriptions, education and employment. Using this design, rates...

  20. Thermal conductivity of molten metals

    Energy Technology Data Exchange (ETDEWEB)

    Peralta-Martinez, Maria Vita

    2000-02-01

    A new instrument for the measurement of the thermal conductivity of molten metals has been designed, built and commissioned. The apparatus is based on the transient hot-wire technique and it is intended for operation over a wide range of temperatures, from ambient up to 1200 K, with an accuracy approaching 2%. In its present form the instrument operates up to 750 K. The construction of the apparatus involved four different stages, first, the design and construction of the sensor and second, the construction of an electronic system for the measurement and storage of data. The third stage was the design and instrumentation of the high temperature furnace for the melting and temperature control of the sample, and finally, an algorithm was developed for the extraction of the thermal conductivity from the raw measurement data. The sensor consists of a cylindrical platinum-wire symmetrically sandwiched between two rectangular plane sheets of alumina. The rectangular sensor is immersed in the molten metal of interest and a voltage step is applied to the ends of the platinum wire to induce heat dissipation and a consequent temperature rise which, is in part, determined by the thermal conductivity of the molten metal. The process is described by a set of partial differential equations and appropriate boundary conditions rather than an approximate analytical solution. An electronic bridge configuration was designed and constructed to perform the measurement of the resistance change of the platinum wire in the time range 20 {mu}s to 1 s. The resistance change is converted to temperature change by a suitable calibration. From these temperature measurements as a function of time the thermal conductivity of the molten metals has been deduced using the Finite Element Method for the solution of the working equations. This work has achieved its objective of improving the accuracy of the measurement of the thermal conductivity of molten metals from {+-}20% to {+-}2%. Measurements

  1. Technological requirements of profile machining

    Institute of Scientific and Technical Information of China (English)

    PARK Sangchul; CHUNG Yunchan

    2006-01-01

    The term ‘profile machining’is used to refer to the milling of vertical surfaces described by profile curves. Profile machining requires higher precision (1/1000 mm) than regular 3D machining (1/100 mm) with the erosion of sharp vertices should being especially avoided. Although, profile machining is very essential for making trimming and flangedies, it seldom brought into focus. This paper addresses the technological requirements of profile machining including machining width and depth control,minimizing toolware, and protecting sharp vertices. Issues of controller alarms are also addressed.

  2. Anger profiles in social anxiety disorder.

    Science.gov (United States)

    Versella, Mark V; Piccirillo, Marilyn L; Potter, Carrie M; Olino, Thomas M; Heimberg, Richard G

    2016-01-01

    Individuals with social anxiety disorder (SAD) exhibit elevated levels of anger and anger suppression, which are both associated with increased depression, diminished quality of life, and poorer treatment outcomes. However, little is known about how anger experiences differ among individuals with SAD and whether any heterogeneity might relate to negative outcomes. This investigation sought to empirically define anger profiles among 136 treatment-seeking individuals with SAD and to assess their association with distress and impairment. A latent class analysis was conducted utilizing the trait subscales of the State-Trait Anger Expression Inventory-2 as indicators of class membership. Analysis revealed four distinct anger profiles, with greatest distress and impairment generally demonstrated by individuals with elevated trait anger, a greater tendency to suppress the expression of anger, and diminished ability to adaptively control their anger expression. These results have implications for tailoring more effective interventions for socially anxious individuals.

  3. Space charge profiles in low density polyethylene samples containing a permittivity/conductivity gradient

    DEFF Research Database (Denmark)

    Bambery, K.R.; Fleming, R.J.; Holbøll, Joachim

    2001-01-01

    Laser induced pressure pulse space charge measurements were made on 1.5 mm thick plaques of high purity low density polyethylene equipped with vacuum-evaporated aluminium electrodes. Temperature differences up to 20 °C were maintained across the samples, which were subjected to dc fields up to 1.......5×107 V m-1. Current density was also measured as a function of temperature and field. Space charge due exclusively to the temperature gradient was detected, with density of order 0.01 C m-3. The activation energy associated with the transport of electrons through the bulk was calculated as 0.09 e...

  4. Effects of thermal conduction and convection on temperature profile in a water calorimeter for proton beams

    Energy Technology Data Exchange (ETDEWEB)

    Gargioni, E.; Manfredotti, C. [Torino Univ. (Italy). Dipt. di Fisica; Laitano, R.F.; Guerra, A.S. [Ist. Nazionale di Metrologia delle Radiazioni Ionizzanti, ENEA, Roma (Italy)

    1997-09-01

    In water calorimetry, in addition to the temperature increase due to beam energy deposition in water, unwanted thermal effects occur during and after calorimeter irradiation. This should be accounted for by applying proper corrections to the experimental results. In order to determine such corrections heat flow calculations were performed using the `finite element` method. This method applies even to complex 3D geometries with not necessarily symmetric conditions. Some preliminary results of these calculations are presented together with a description of the analytical method for the evaluation of the correction factors that should be applied to the experimental results to account for the above thermal effects. (orig.)

  5. Space charge profiles in low density polyethylene samples containing a permittivity/conductivity gradient

    DEFF Research Database (Denmark)

    Bambery, K.R.; Fleming, R.J.; Holbøll, Joachim

    2001-01-01

    .5×107 V m-1. Current density was also measured as a function of temperature and field. Space charge due exclusively to the temperature gradient was detected, with density of order 0.01 C m-3. The activation energy associated with the transport of electrons through the bulk was calculated as 0.09 e...

  6. 32 CFR 234.7 - Disorderly conduct.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Disorderly conduct. 234.7 Section 234.7 National... CONDUCT ON THE PENTAGON RESERVATION § 234.7 Disorderly conduct. A person commits disorderly conduct when... nature and purpose of the actor's conduct, location, time of day or night, and other factors that would...

  7. Deflagration Wave Profiles

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Laboratory

    2012-04-03

    Shock initiation in a plastic-bonded explosives (PBX) is due to hot spots. Current reactive burn models are based, at least heuristically, on the ignition and growth concept. The ignition phase occurs when a small localized region of high temperature (or hot spot) burns on a fast time scale. This is followed by a growth phase in which a reactive front spreads out from the hot spot. Propagating reactive fronts are deflagration waves. A key question is the deflagration speed in a PBX compressed and heated by a shock wave that generated the hot spot. Here, the ODEs for a steady deflagration wave profile in a compressible fluid are derived, along with the needed thermodynamic quantities of realistic equations of state corresponding to the reactants and products of a PBX. The properties of the wave profile equations are analyzed and an algorithm is derived for computing the deflagration speed. As an illustrative example, the algorithm is applied to compute the deflagration speed in shock compressed PBX 9501 as a function of shock pressure. The calculated deflagration speed, even at the CJ pressure, is low compared to the detonation speed. The implication of this are briefly discussed.

  8. Community-aware user profile enrichment in folksonomy.

    Science.gov (United States)

    Xie, Haoran; Li, Qing; Mao, Xudong; Li, Xiaodong; Cai, Yi; Rao, Yanghui

    2014-10-01

    In the era of big data, collaborative tagging (a.k.a. folksonomy) systems have proliferated as a consequence of the growth of Web 2.0 communities. Constructing user profiles from folksonomy systems is useful for many applications such as personalized search and recommender systems. The identification of latent user communities is one way to better understand and meet user needs. The behavior of users is highly influenced by the behavior of their neighbors or community members, and this can be utilized in constructing user profiles. However, conventional user profiling techniques often encounter data sparsity problems as data from a single user is insufficient to build a powerful profile. Hence, in this paper we propose a method of enriching user profiles based on latent user communities in folksonomy data. Specifically, the proposed approach contains four sub-processes: (i) tag-based user profiles are extracted from a folksonomy tripartite graph; (ii) a multi-faceted folksonomy graph is constructed by integrating tag and image affinity subgraphs with the folksonomy tripartite graph; (iii) random walk distance is used to unify various relationships and measure user similarities; (iv) a novel prototype-based clustering method based on user similarities is used to identify user communities, which are further used to enrich the extracted user profiles. To evaluate the proposed method, we conducted experiments using a public dataset, the results of which show that our approach outperforms previous ones in user profile enrichment.

  9. Dipole Engineering for Conducting Polymers

    Science.gov (United States)

    McClain, William Edward

    A method for the growth of a TiO2 adhesion layer on PEDOT:PSS (poly[3,4- ethylenedioxythiophene]: poly[styrenesulfonate]) and for further functionalization with self-assembled monolayers of phosphonates (SAMPs) was developed. The TiO2 adhesion layer was grown via chemical vapor deposition using a titanium(IV) t-butoxide precursor, and was characterized by goniometry and X-ray photoelectron spectroscopy. TiO 2 grown on a model system, H-terminated silicon, indicated that the surface was t-butoxide terminated. Phenylphosphonic acids were synthesized with a variety of molecular dipoles and were used to change the work function of PEDOT:PSS through the formation of an aggregate surface dipole. Good correlation was found between the z-component of the molecular dipole and the change in work function, indicating that the film was well-ordered and dense. The magnitude of the changes in work function and goniometry measurements were similar to measurements on ITO, a substrate on which phosphonates form well-ordered monolayers. As-grown PEDOT:PSS/TiO 2 electrodes showed a lower work function compared to PEDOT:PSS, which is attributed to residual t-butoxide groups on the TiO 2 surface. UPS measurements revealed that reductions in work function in the modified electrodes lowered the difference in energy between the Fermi energy (EF) of the conducting polymer and the LUMO of PCBM ([6,6]-phenyl-C 61-butyric acid methyl ester). A reduction of this energy difference should translate into increased electron injection in electron-only diodes; however, devices with modified electrodes showed decreased current densities. UPS/IPES measurements show that TiO2 grown using this method has a much larger band gap than bulk or nanocrystalline TiO2, which is likely responsible for this decrease in device currents. At high bias, device currents increase dramatically, and the effects of the phosphonates or t-butoxide terminated TiO2 vanish. This is attributed to a reduction of the TiO2 to

  10. Estimating Saturated Hydraulic Conductivity from Surface Ground-Penetrating Radar Monitoring of Infiltration

    CERN Document Server

    Léger, Emmanuel; Coquet, Yves

    2013-01-01

    In this study we used Hydrus-1D to simulate water infiltration from a ring infiltrometer. We generated water content profiles at each time step of infiltration, based on a particular value of the saturated hydraulic conductivity while knowing the other van Genuchten parameters. Water content profiles were converted to dielectric permittivity profiles using the Complex Refractive Index Method relation. We then used the GprMax suite of programs to generate radargrams and to follow the wetting front using arrival time of electromagnetic waves recorded by a Ground-Penetrating Radar (GPR). Theoretically, the depth of the inflection point of the water content profile simulated at any infiltration time step is related to the peak of the reflected amplitude recorded in the corresponding trace in the radargram. We used this relationship to invert the saturated hydraulic conductivity for constant and falling head infiltrations. We present our method on synthetic examples and on two experiments carried out on sand. We f...

  11. Ethnic variation in inflammatory profile in tuberculosis.

    Directory of Open Access Journals (Sweden)

    Anna K Coussens

    Full Text Available Distinct phylogenetic lineages of Mycobacterium tuberculosis (MTB cause disease in patients of particular genetic ancestry, and elicit different patterns of cytokine and chemokine secretion when cultured with human macrophages in vitro. Circulating and antigen-stimulated concentrations of these inflammatory mediators might therefore be expected to vary significantly between tuberculosis patients of different ethnic origin. Studies to characterise such variation, and to determine whether it relates to host or bacillary factors, have not been conducted. We therefore compared circulating and antigen-stimulated concentrations of 43 inflammatory mediators and 14 haematological parameters (inflammatory profile in 45 pulmonary tuberculosis patients of African ancestry vs. 83 patients of Eurasian ancestry in London, UK, and investigated the influence of bacillary and host genotype on these profiles. Despite having similar demographic and clinical characteristics, patients of differing ancestry exhibited distinct inflammatory profiles at presentation: those of African ancestry had lower neutrophil counts, lower serum concentrations of CCL2, CCL11 and vitamin D binding protein (DBP but higher serum CCL5 concentrations and higher antigen-stimulated IL-1 receptor antagonist and IL-12 secretion. These differences associated with ethnic variation in host DBP genotype, but not with ethnic variation in MTB strain. Ethnic differences in inflammatory profile became more marked following initiation of antimicrobial therapy, and immunological correlates of speed of elimination of MTB from the sputum differed between patients of African vs. Eurasian ancestry. Our study demonstrates a hitherto unappreciated degree of ethnic heterogeneity in inflammatory profile in tuberculosis patients that associates primarily with ethnic variation in host, rather than bacillary, genotype. Candidate immunodiagnostics and immunological biomarkers of response to antimicrobial therapy

  12. Rigidity-tuning conductive elastomer

    Science.gov (United States)

    Shan, Wanliang; Diller, Stuart; Tutcuoglu, Abbas; Majidi, Carmel

    2015-06-01

    We introduce a conductive propylene-based elastomer (cPBE) that rapidly and reversibly changes its mechanical rigidity when powered with electrical current. The elastomer is rigid in its natural state, with an elastic (Young’s) modulus of 175.5 MPa, and softens when electrically activated. By embedding the cPBE in an electrically insulating sheet of polydimethylsiloxane (PDMS), we create a cPBE-PDMS composite that can reversibly change its tensile modulus between 37 and 1.5 MPa. The rigidity change takes ˜6 s and is initiated when a 100 V voltage drop is applied across the two ends of the cPBE film. This magnitude of change in elastic rigidity is similar to that observed in natural skeletal muscle and catch connective tissue. We characterize the tunable load-bearing capability of the cPBE-PDMS composite with a motorized tensile test and deadweight experiment. Lastly, we demonstrate the ability to control the routing of internal forces by embedding several cPBE-PDMS ‘active tendons’ into a soft robotic pneumatic bending actuator. Selectively activating the artificial tendons controls the neutral axis and direction of bending during inflation.

  13. Effective electrical conductivity of a nonuniform plasma

    Science.gov (United States)

    Nichols, L. D.

    1975-01-01

    A simple nonuniformity model for calculating effective electrical conductivity and Hall parameter is proposed. The model shows that the effective conductivity can be significantly reduced by nonuniformities in the Hall parameter, even if the local conductivity is uniform.

  14. CRED Shallow CTD Profiles; Maui, Main Hawaiian Islands; Cruise: OES0810, Data Date Range: 20081017-20081103 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  15. CRED Shallow CTD Profiles; Molokai, Main Hawaiian Islands; Cruise: HA1008, Data Date Range: 20101023-20101104 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  16. CRED Shallow CTD Profiles; Tutuila, American Samoa; Cruise: HI0802, Data Date Range: 20080218-20080223 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  17. CRED Shallow CTD Profiles; Swains Island, American Samoa; Cruise: HI0802, Data Date Range: 20080317-20080318 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  18. CRED Shallow CTD Profiles; Niihau, Main Hawaiian Islands; Cruise: OES0810, Data Date Range: 20081109-20081111 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  19. CRED Shallow CTD Profiles; Oahu, Main Hawaiian Islands; Cruise: HI0610, Data Date Range: 20060727-20060728 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  20. CRED Shallow CTD Profiles; Guam; Cruise: HI0902, Data Date Range: 20090404-20090408 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  1. CRED Shallow CTD Profiles; Maui, Main Hawaiian Islands; Cruise: HA1008, Data Date Range: 20101015-20101020 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  2. CRED Shallow CTD Profiles; Rose Atoll, American Samoa; Cruise: OES0402, Data Date Range: 20040209-20040211 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  3. CRED Shallow CTD Profiles; Molokai, Main Hawaiian Islands; Cruise: HI0505, Data Date Range: 20050801-20050802 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  4. CRED Shallow CTD Profiles; Guam; Cruise: OES0307, Data Date Range: 20030922-20030925 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  5. CRED Shallow CTD Profiles; Swains Island, American Samoa; Cruise: HI0602, Data Date Range: 20060212-20060213 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  6. CRED Shallow CTD Profiles; Guam; Cruise: HI0702, Data Date Range: 20070511-20070515 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  7. CRED Shallow CTD Profiles; Guam; Cruise: OES0512, Data Date Range: 20051003-20051008 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  8. CRED Shallow CTD Profiles; Rose Atoll, American Samoa; Cruise: HI0602, Data Date Range: 20060305-20060309 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  9. CRED Shallow CTD Profiles; Molokai, Main Hawaiian Islands; Cruise: HI0610, Data Date Range: 20060730-20060815 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  10. CRED Shallow CTD Profiles; Niihau, Main Hawaiian Islands; Cruise: HI0610, Data Date Range: 20060809-20060811 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  11. CRED Shallow CTD Profiles; Tutuila, American Samoa; Cruise: OES0402, Data Date Range: 20040219-20040225 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  12. CRED Shallow CTD Profiles; Tutuila, American Samoa; Cruise: HA1201_LEGI, Data Date Range: 20120325-20120326 (NODC Accession 0107470)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  13. CRED Shallow CTD Profiles; Maui, Main Hawaiian Islands; Cruise: HI0505, Data Date Range: 20050804-20050805 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  14. CRED Shallow CTD Profiles; Guam; Cruise: HA1101_LEGIII, Data Date Range: 20110504-20110507. (NODC Accession 0107470)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  15. CRED Shallow CTD Profiles; Niihau, Main Hawaiian Islands; Cruise: HI0505, Data Date Range: 20050717-20050720 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  16. CRED Shallow CTD Profiles; Maui, Main Hawaiian Islands; Cruise: OES0502, Data Date Range: 20050225-20050225 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  17. CRED Shallow CTD Profiles; Tutuila, American Samoa; Cruise: HI0602, Data Date Range: 20060218-20060226 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  18. CRED Shallow CTD Profiles; Oahu, Main Hawaiian Islands; Cruise: OES0810, Data Date Range: 20081112-20081113 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  19. CRED Shallow CTD Profiles; Swains Island, American Samoa; Cruise: OES0402, Data Date Range: 20040215-20040218 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  20. CRED Shallow CTD Profiles; Oahu, Main Hawaiian Islands; Cruise: HA1008, Data Date Range: 20101024-20101102 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  1. CRED Shallow CTD Profiles; Tutuila, American Samoa; Cruise: TC0201_LEGII, Data Date Range: 20020210-20020304 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  2. CRED Shallow CTD Profiles; Rose Atoll, American Samoa; Cruise: HI0802, Data Date Range: 20080313-20080314 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  3. CRED Shallow CTD Profiles; Oahu, Main Hawaiian Islands; Cruise: HI0505, Data Date Range: 20050715-20050724 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  4. CRED Shallow CTD Profiles; Tutuila, American Samoa; Cruise: HI1001_LEGII, Data Date Range: 20100217-20100227 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  5. CRED Shallow CTD Profiles; Niihau, Main Hawaiian Islands; Cruise: HA1008, Data Date Range: 20101029-20101101 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  6. CRED Shallow CTD Profiles; Molokai, Main Hawaiian Islands; Cruise: OES0810, Data Date Range: 20081021-20081025 (NODC Accession 0039382).

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are...

  7. Composites incorporated a conductive polymer nanofiber network

    Energy Technology Data Exchange (ETDEWEB)

    Pozzo, Lilo Danielle; Newbloom, Gregory

    2017-04-11

    Methods of forming composites that incorporate networks of conductive polymer nanofibers are provided. Networks of less-than conductive polymers are first formed and then doped with a chemical dopant to provide networks of conductive polymers. The networks of conductive polymers are then incorporated into a matrix in order to improve the conductivity of the matrix. The formed composites are useful as conductive coatings for applications including electromagnetic energy management on exterior surfaces of vehicles.

  8. Preliminary Investigation of Profiling Tools and Methods

    Science.gov (United States)

    2011-06-01

    Minister of National Defence, 2011 © Sa Majesté la Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale, 2011...indicate the need for further investigations to be able to support or negate the usefulness of GP. The critique of GP suggests that “results show...C., Jones, N.J., Taylor, P.J. & Snook, B. (2006). “Validities and Abilities in Criminal Profiling: A Critique of the Studies Conducted by Richard

  9. Electrical conductivity of lunar surface rocks - Laboratory measurements and implications for lunar interior temperatures

    Science.gov (United States)

    Schwerer, F. C.; Huffman, G. P.; Fisher, R. M.; Nagata, T.

    1974-01-01

    Results are reported for laboratory measurements of the dc and low-frequency ac electrical conductivity of three lunar rocks with ferrous iron contents of 5 to 26 wt %. The measurements were made at temperatures ranging from 20 to 1000 C, and Mossbauer spectroscopy was used to determine the dependence of electrical conductivity on furnace atmosphere. It is found that the magnitude of electrical conductivity generally increases with increasing iron content. A comparison of the data on these samples with data on terrestrial olivines and pyroxenes shows that the electrical conductivity of anhydrous silicate minerals is influenced primarily by the concentration, oxidation state, and distribution of iron, while the silicate crystal structure is only of secondary importance. Lunar interior temperatures are deduced from experimental lunar conductivity profiles, and the resulting temperature-depth profiles are found to be consistent with those calculated for two different lunar evolutionary models as well as with various experimental constraints.

  10. Spiking the expectancy profiles

    DEFF Research Database (Denmark)

    Hansen, Niels Chr.; Loui, Psyche; Vuust, Peter

    Melodic expectations are generated with different degrees of certainty. Given distributions of expectedness ratings for multiple continuations of each context, as obtained with the probe-tone paradigm, this certainty can be quantified in terms of Shannon entropy. Because expectations arise from...... Kullback-Leibler or Jensen-Shannon Divergence) between listeners’ prior expectancy profiles and probability distributions of a musical style or of stimuli used in short-term experiments. Five previous probe-tone experiments with musicians and non-musicians were revisited. In Experiments 1-2 participants...... and relevance of musical training and within-participant decreases after short-term exposure to novel music. Thus, whereas inexperienced listeners make high-entropy predictions, statistical learning over varying timescales enables listeners to generate melodic expectations with reduced entropy...

  11. Profiling Expelled Students

    Directory of Open Access Journals (Sweden)

    Warnie Richardson

    2010-05-01

    Full Text Available The purpose of this study was to determine what, if any, demographic trends exist respecting students expelled for violent behavior. The data collected from 104 confidential student files were used to profile each of the following: A. The violent student, B. The nature of school violence, and C. How schools are dealing with violent students. The student expelled for violent behavior is typically male, between the ages of 15 and 18, has a history of previous suspension and has average to below-average academic skills. The incidents of violence occur in common areas of the school, are rarely directed toward staff and teachers, involve a weapon, and are classified as aggravated assaults. Schools are directly involving the police, expelling students for extended periods of time

  12. Losartan: Comprehensive Profile.

    Science.gov (United States)

    Al-Majed, Abdul-Rahman A; Assiri, Ebrahim; Khalil, Nasr Y; Abdel-Aziz, Hatem A

    2015-01-01

    Losartan (Cozaar™) is an angiotensin II receptor antagonist with antihypertensive activity. It is used in the management of hypertension and heart failure. Nomenclature, formulae, elemental analysis, and appearance of the drug are included in this review. The uses, applications, and the variety of synthetic pathways of this drug are outlined. Physical characteristics including: ionization constant, solubility, X-ray powder diffraction pattern, thermal methods of analysis, UV spectrum, IR spectrum, mass spectrum with fragmentation patterns, and NMR (1H and 13C) spectra of losartan together with the corresponding figures and/or tables are all produced. This profile also includes the monograph of British Pharmacopoeia, together with several reported analytical methods including: spectrophotometric, electrochemical, chromatographic, and capillary electrophoretic methods. The stability, the pharmacokinetic behavior and the pharmacology of the drug are also provided.

  13. [Legal implication of DNA profiling].

    Science.gov (United States)

    Doutremepuich, Christian

    2012-06-01

    In recent years, DNA profiling has been used regularly by the justice system, and has seen a number of improvements, with the need for fewer cells, more efficient DNA extraction and purification, and more rapid genotyping. These methods can now identify an individual more rapidly, from a corpse, blood stain, sperm or epithelial cells, by comparison with familial profiles. In France, DNA profiling can only be ordered by a judge.

  14. Racial Profiling as Collective Definition

    Directory of Open Access Journals (Sweden)

    Trevor G. Gardner

    2014-09-01

    Full Text Available Economists and other interested academics have committed significant time and effort to developing a set of circumstances under which an intelligent and circumspect form of racial profiling can serve as an effective tool in crime finding–the specific objective of finding criminal activity afoot. In turn, anti-profiling advocates tend to focus on the immediate efficacy of the practice, the morality of the practice, and/or the legality of the practice. However, the tenor of this opposition invites racial profiling proponents to develop more surgical profiling techniques to employ in crime finding. In the article, I review the literature on group distinction to discern its relevance to the practice and study of racial profiling. I argue that the costs of racial profiling extend beyond inefficient policing and the humiliation of law-abiding minority pedestrians and drivers. Racial profiling is simultaneously a process of perception and articulation of relative human characteristics (both positive and negative; it binds and reifies the concepts of race and criminality, fixing them into the subconscious of the profiled, the profiler, and society at large.

  15. Making Conductive Polymers By Arc Tracking

    Science.gov (United States)

    Daech, Alfred F.

    1992-01-01

    Experimental technique for fabrication of electrically conductive polymeric filaments based on arc tracking, in which electrical arc creates conductive carbon track in material that initially was insulator. Electrically conductive polymeric structures made by arc tracking aligned along wire on which formed. Alignment particularly suited to high conductivity and desirable in materials intended for testing as candidate superconductors.

  16. 31 CFR 8.52 - Disreputable conduct.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Disreputable conduct. 8.52 Section 8... ALCOHOL, TOBACCO AND FIREARMS Disciplinary Proceedings § 8.52 Disreputable conduct. Disreputable conduct... violation of this provision. (j) Contemptuous conduct in connection with practice before the Bureau...

  17. 32 CFR 1903.14 - Disorderly conduct.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Disorderly conduct. 1903.14 Section 1903.14 National Defense Other Regulations Relating to National Defense CENTRAL INTELLIGENCE AGENCY CONDUCT ON AGENCY INSTALLATIONS § 1903.14 Disorderly conduct. A person commits disorderly conduct when, with intent...

  18. 12 CFR 19.196 - Disreputable conduct.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Disreputable conduct. 19.196 Section 19.196... PROCEDURE Parties and Representational Practice Before the OCC; Standards of Conduct § 19.196 Disreputable conduct. Disreputable conduct for which an individual may be censured, debarred, or suspended from...

  19. 36 CFR 1002.34 - Disorderly conduct.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Disorderly conduct. 1002.34... RECREATION § 1002.34 Disorderly conduct. (a) A person commits disorderly conduct when, with intent to cause... purpose of the actor's conduct, location, time of day or night, and other factors that would govern the...

  20. 25 CFR 11.441 - Disorderly conduct.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Disorderly conduct. 11.441 Section 11.441 Indians BUREAU... ORDER CODE Criminal Offenses § 11.441 Disorderly conduct. (a) A person is guilty of disorderly conduct... or she persists in disorderly conduct after reasonable warning or request to desist. Otherwise...

  1. Profiling Language Skills. Trialing the Languages Profile in the ACT.

    Science.gov (United States)

    Liddicoat, Anthony J.

    1998-01-01

    The Australian Capital Territory (ACT) National Professional Development Program helped language teachers familiarize themselves with the Languages Profile and collect and annotate work samples using the Profile. Their experiences become the basis for disseminating information among ACT language teachers. The paper presents recurrent issues raised…

  2. Cognitive Profile of Children and Adolescents with Anorexia Nervosa

    DEFF Research Database (Denmark)

    Kjaersdam Telléus, Gry; Jepsen, Jens Richardt; Bentz, Mette

    2014-01-01

    OBJECTIVE: Few studies of cognitive functioning in children and adolescents with anorexia nervosa (AN) have been conducted. The aim of this study was to examine the neurocognitive and intelligence profile of this clinical group. METHOD: The study was a matched case-control (N = 188), multi...

  3. Resiliency Scales for Children and Adolescents: Profiles of Juvenile Offenders

    Science.gov (United States)

    Mowder, Melissa H.; Cummings, Jack A.; McKinney, Robert

    2010-01-01

    An exploratory study of resiliency profiles of male and female juvenile offenders committed to a juvenile correctional facility was conducted. The goal of the present study was to examine juvenile offenders' positive characteristics (e.g., adaptability, optimism, self-efficacy, tolerance of differences). To assess positive characteristics and…

  4. Workers in Agribusiness: Profile, Images, Recruitment, Mobility, and Occupations.

    Science.gov (United States)

    Taylor, Lee, Ed.; Leagans, J. Paul, Ed.

    Designed and conducted by a team of professors and research associates at New York State College of Agriculture, this study focuses on five primary areas of concern: (1) profile of firms and workers, (2) images of agribusiness work, (3) recruitment, (4) occupational mobility, and (5) agribusiness occupations and projections. Findings reveal that…

  5. microbiological profile of oral infections in diabetic patients and non ...

    African Journals Online (AJOL)

    boaz

    Oral exam was conducted by a Dentist to assess oral infections and oral health status of participants. Results: ... Conclusion: The oral microbiological profile of diabetic patients was different from those of non-diabetics and aerobic ... threatening conditions such as HIV/AIDS, ..... noted that diabetes was an added risk for oral.

  6. Reproducibility of Automated Voice Range Profiles, a Systematic Literature Review

    DEFF Research Database (Denmark)

    Printz, Trine; Rosenberg, Tine; Godballe, Christian

    2017-01-01

    literature on test-retest accuracy of the automated voice range profile assessment. Study design: Systematic review. Data sources: PubMed, Scopus, Cochrane Library, ComDisDome, Embase, and CINAHL (EBSCO). Methods: We conducted a systematic literature search of six databases from 1983 to 2016. The following...

  7. Research on Fish Consumer Profile Evaluation in Romanian Plain Area

    Directory of Open Access Journals (Sweden)

    Silvius STANCIU

    2011-11-01

    Full Text Available Research aimed at shaping a fish consumer profile in the Romanian Plain area. 150 people were interviewed. Preferences evaluation was conducted by means of a questionnaire with 27 questions. Favorite fish species, purchasing place and manner, favorite preparation choices, consumption frequency and place have been identified.

  8. Profile of research methodology and statistics training of ...

    African Journals Online (AJOL)

    curriculum in medicine and the profile of a basic medical practitioner as given in the ... A pilot study was conducted at the School of Nursing Science at the. University of ... the universities to see what the aims and objectives of their courses are.

  9. Ultra wide band electromagnetic scattering of a fractal profile

    Science.gov (United States)

    Rouvier, S.; Borderies, P.; Chênerie, I.

    1997-03-01

    The relationship between the fractal dimension of a perfectly conducting bidimensionnal profile and the fractal dimension of the time domain scattered field is investigated. The first part of the paper is dedicated to the profile itself; implementation of the counting box method for fractal dimension estimation is described and improved by the adjunction of an iterative process involving a correlation criterion. The second part is about the field scattered by a fractal profile which is calculated by the method of moments; polarizations, directions of incidence and observation effects are studied. Influence of spectral window and of noise is also investigated. Results show that fractal dimensions of the field and of the profile are linked by a monotonous increasing function which weakly depends on the polarizations and on the directions of incidence and observation. Moreover, the fractal dimension shows robustness to noise.

  10. [Professional profiles of graduates from Chilean faculties of medicine].

    Science.gov (United States)

    Parada, Mario; Romero, María I; Moraga, Fabián

    2015-04-01

    The professional profile of health care professionals should incorporate recommendations of international agencies and adapt to the local conditions of each country. To conduct a qualitative analysis of Medical Graduate Profiles of universities grouped in the Chilean Association of Medicine Faculties (ASOFAMECH), characterizing its Social Focus, Humanist Approach, Social and Communication Skills. Documentary analysis of profiles published on the respective web pages, using Atlas Ti software, establishing emerging categories and subcategories. These profiles were compared with the recommendations of the Pan-American Health Organization. Data in Social Focus suggests that although community issues are a common element, the work in primary health and health promotion are rarely included. The Humanist Approach is addressed more commonly than the Social Focus, emphasizing humanization of care, ethical and religious values. Although, social and communication skills are scarcely acknowledged, those mentioned are teamwork and leadership role. There is a marked heterogeneity in the information declared and universities have not fully incorporated the recommendations of international organizations.

  11. Proton conducting membrane using a solid acid

    Science.gov (United States)

    Haile, Sossina M. (Inventor); Chisholm, Calum (Inventor); Boysen, Dane A. (Inventor); Narayanan, Sekharipuram R. (Inventor)

    2006-01-01

    A solid acid material is used as a proton conducting membrane in an electrochemical device. The solid acid material can be one of a plurality of different kinds of materials. A binder can be added, and that binder can be either a nonconducting or a conducting binder. Nonconducting binders can be, for example, a polymer or a glass. A conducting binder enables the device to be both proton conducting and electron conducting.

  12. Ethnosocial profile of Tuvans

    Directory of Open Access Journals (Sweden)

    Valeriya S. Kan

    2016-06-01

    Full Text Available The article examines the ethnosocial profile of contemporary Tuvans, with a focus on the dynamics of population change, human environment, self-consciousness, interethnic relations and language command. Our study was based on the official data of the Federal Census and the current statistics we obtained from Tuva territorial branch of the Federal State Statistics Service, as well as on the outcomes of the opinion polls held by a team lead by the author in 2008-2015. Due to traditionally high birth rate, the Tuvan population of Russia continues to grow (243422 in 2002, 263934 in 2010. This is also true for their share in the total population of Russia (0.17% in 2002, 0.19% in 2010. The main features of Tuvan human environment are their compact settlement within the Republic of Tuva (249299, or 95% of overall population, as well as living largely in a monoethnic environment, low level of ethnocultural and linguistic diversity and prevalence of rural population. The share of indigenous population in the region has been steadily increasing (64% in 1989, 77% in 2002, 82% in 2002, while those of other groups have been decreasing over time. The net migration remains negative due to ethnic Russians leaving the socially and economically dysfunctional region. Tuvans account for 92% of rural population, and 73% of the urban. The rural-urban balance in Tuva is shifting towards the latter slower than in the national average. Interethnic relations in the region can be described as stable, with a slight degree of tension. Problems mainly happen on the level of day-to-day communication. The sub-ethnicity of Tojin Tuvans is decreasing in numbers (4435 people in 2002, and 1856 in 2010. We believe the reason lies in the change of self-consciousness which accompanied the complete abandonment of nomadic lifestyle. In the article, we also define and describe the factors which contribute to the reproduction of Tuvan ethnicity, including the policy of the regional

  13. USGIN ISO metadata profile

    Science.gov (United States)

    Richard, S. M.

    2011-12-01

    The USGIN project has drafted and is using a specification for use of ISO 19115/19/39 metadata, recommendations for simple metadata content, and a proposal for a URI scheme to identify resources using resolvable http URI's(see http://lab.usgin.org/usgin-profiles). The principal target use case is a catalog in which resources can be registered and described by data providers for discovery by users. We are currently using the ESRI Geoportal (Open Source), with configuration files for the USGIN profile. The metadata offered by the catalog must provide sufficient content to guide search engines to locate requested resources, to describe the resource content, provenance, and quality so users can determine if the resource will serve for intended usage, and finally to enable human users and sofware clients to obtain or access the resource. In order to achieve an operational federated catalog system, provisions in the ISO specification must be restricted and usage clarified to reduce the heterogeneity of 'standard' metadata and service implementations such that a single client can search against different catalogs, and the metadata returned by catalogs can be parsed reliably to locate required information. Usage of the complex ISO 19139 XML schema allows for a great deal of structured metadata content, but the heterogenity in approaches to content encoding has hampered development of sophisticated client software that can take advantage of the rich metadata; the lack of such clients in turn reduces motivation for metadata producers to produce content-rich metadata. If the only significant use of the detailed, structured metadata is to format into text for people to read, then the detailed information could be put in free text elements and be just as useful. In order for complex metadata encoding and content to be useful, there must be clear and unambiguous conventions on the encoding that are utilized by the community that wishes to take advantage of advanced metadata

  14. Sensing the wind profile

    Energy Technology Data Exchange (ETDEWEB)

    Pena, A.

    2009-03-15

    This thesis consists of two parts. The first is a synopsis of the theoretical progress of the study that is based on a number of journal papers. The papers, which constitute the second part of the report, aim to analyze, measure, and model the wind prole in and beyond the surface layer by combining observations from cup anemometers with lidars. The lidar is necessary to extend the measurements on masts at the Horns Rev offshore wind farm and over at land at Hoevsoere, Denmark. Both sensing techniques show a high degree of agreement for wind speed measurements performed at either sites. The wind speed measurements are averaged for several stability conditions and compare well with the surface-layer wind profile. At Hoevsoere, it is sufficient to scale the wind speed with the surface friction velocity, whereas at Horns Rev a new scaling is added, due to the variant roughness length. This new scaling is coupled to wind prole models derived for flow over the sea and tested against the wind proles up to 160 m at Horns Rev. The models, which account for the boundary-layer height in stable conditions, show better agreement with the measurements than compared to the traditional theory. Mixing-length parameterizations for the neutral wind prole compare well with length-scale measurements up to 300 m at Hoevsoere and 950 m at Leipzig. The mixing-length-derived wind proles strongly deviate from the logarithmic wind prole, but agree better with the wind speed measurements. The length-scale measurements are compared to the length scale derived from a spectral analysis performed up to 160 m at Hoevsoere showing high agreement. Mixing-length parameterizations are corrected to account for stability and used to derive wind prole models. These compared better to wind speed measurements up to 300 m at Hoevsoere than the surface-layer wind prole. The boundary-layer height is derived in nearneutral and stable conditions based on turbulent momentum uxes only and in unstable conditions

  15. Stability of cocaine impurity profiles during 12 months of storage.

    Science.gov (United States)

    Nielsen, Louise Stride; Villesen, Palle; Lindholst, Christian

    2016-07-01

    During the lifetime of a cocaine batch from production end to consumption, several alterations may occur, leading to possible changes in the original impurity profile. Such profile changes may eventually result in erroneous forensic evaluations. In the present study, the stability of both the alkaloid and the residual solvent impurity profiles of cocaine were evaluated over a period of 12 months under different storage conditions (temperature, purity and weight) using GC-MS and HS-GC-MS, respectively. The sample purity (pprofile. The most significant change was observed in low purity samples stored at 37°C. In contrast, no changes were observed in the residual solvent profile at all storage conditions for the entire 12-month study period. This finding indicates that the residual solvent profile may be more applicable than the corresponding alkaloid profile when cocaine seizures subjected to different storage conditions are compared. Our results clearly demonstrate that cocaine alkaloid profiles change over time and are most susceptible to sample purity and storage temperature. As a consequence, storage conditions and purity should be taken into account when cocaine comparison is conducted in criminal cases.

  16. Lipid Profiles and NSW

    Science.gov (United States)

    2008-07-16

    Prescribed by ANSI Std Z39-18 Study  Reviewed age, height, weight, total cholesterol, LDL , HDL and Triglycerides in 85 SEAL physicals conducted...in CY 2007.  Compared results with ATP-III standards for Cholesterol and LDL .  Target for cholesterol < 200 mg/dl  Target for LDL < 130 mg...dl Results  Avg Age: 32.83 (21-52)  Avg Cholesterol: 186.6 (108-312)  Avg LDL : 119.9 (70-221)  22/85 (25.9%) Total Chol > 200  23/85

  17. Homocystiene Profile in Elderly

    Directory of Open Access Journals (Sweden)

    Ola A. Hafiz1, Sarah A.Hamza1,Walaa W. Aly1,Wessam E.Saad2, Ahmed K.Mortagy1

    2013-01-01

    Full Text Available Background: Homocysteine (Hcy is a sulfurated amino acid an elevated homocysteine level is a marker for a pathogenic process as well as a cause of pathology. Method: it is across sectional study conducted on 91 elderly participants 60 years and older selected from geriatric outpatient clinic and geriatric inpatient departmentthey underwent comprehensive geriatric assessment, and homocysteine (Hcy level in blood by Enzyme Immunoassay (EIA. Results: homocysteine not significantly related to age, sex and functional status. Also mean Hcy level is 15.4 μmol/liter. Conclusion: further studies to evaluate Hcy level in elderly with different ages are recommended.

  18. The worker profile autocontrolled

    Directory of Open Access Journals (Sweden)

    Jairo Omar Delgado Mora

    2015-06-01

    Full Text Available This document is part of two deliveries. In this first paper is to make an approach to the concept of self-control from the very beginning with Sakichi Toyoda, founder of what the industry Toyota Motor Company, additionally taking some excerpts of the concept issued by teachers and the psychologist Henry Murray, a professor at the university Harvard precursor test TAT personality test creator, pen applied world wide by psychologists David McCllelan, also a psychologist and a pioneer in the study of human needs and the concept of competence; Professor Jeffrey Pfeffer of Stanford University organizational behavior and theory, Frederick Hertzberg, Psychologist and strong influential in business management, Kronfly Cruz, lawyer and investigator of social and administrative sciences, Charles Perrow, a sociologist at Yale University and Stanford , who studies the impact of large organizations in society, among others. The study reflects the need to meet organizational objectives related to the physicochemical characteristics of the finished product in a plant of the company’s main beers in the country. In this paper, we intend to make an approximation of worker self -controlled, which when compared with the powers, generic, specific and technical area established by the brewery, will allow generating a methodology to adjust these competencies and to obtain the target profile drawn. This comparison and development of the methodology proposed is the subject of the second work planned.

  19. Aliskiren: a clinical profile

    Directory of Open Access Journals (Sweden)

    Roland E Schmieder

    2006-06-01

    Full Text Available Aliskiren is a novel oral antihypertensive agent, and the first in the new class of direct renin inhibitors. Here we review the key criteria that a new antihypertensive drug should possess, notably effective blood pressure lowering as monotherapy and combination therapy, 24-hour blood pressure control, safety and tolerability, end-organ protective effects, minimal drug interaction and efficacy during long-term use.Aliskiren fulfils key criteria for a new antihypertensive agent.The drug demonstrates effective blood lowering in a number of studies as monotherapy and in combination with a thiazide diuretic (hydrochlorothiazide, an angiotensin-converting enzyme inhibitor (ramipril and a calcium channel blocker (amlodipine. Other studies applying ambulatory blood pressure monitoring show that aliskiren maintains blood pressure control for more than 24 hours. Aliskiren, 150 mg and 300 mg have demonstrated a placebo-like safety and tolerability profile, with no interactions with a wide range of commonly used drugs. Three studies (AVOID, ALOFT and ALLAY are ongoing properties. with aliskiren to assess end-organ protective properties.

  20. Tritium profiles in snowpacks.

    Science.gov (United States)

    Galeriu, D; Davis, P; Workman, W

    2010-10-01

    The release of tritiated water (HTO) to the atmosphere during the winter can contribute significantly to snow contamination and to water-soil-plant contamination after the spring thaw. The dose significance of such a release depends on the persistence of tritiated water in the snowpack, which is primarily controlled by the HTO diffusion process in snow and the rate of re-emission into the atmosphere from the snowpack surface. Monitoring data collected after an acute winter release at Chalk River Laboratories and data obtained in winter over a chronically contaminated area were analyzed to estimate the diffusion coefficient of HTO in the snowpack. Under conditions of cold and dry snow, the diffusion coefficient lay in the range 1-2x10(-10)m(2)s(-1), an order of magnitude lower than diffusion in water but an order of magnitude higher than self-diffusion in ice. These results confirm the theoretical predictions (Bales, 1991). Values up to six times higher were found for warmer periods and just before spring melt, when other processes contribute to profile evolution. The low diffusion rate of tritium in cold, dry snow means that tritium remains in the snowpack throughout the winter, to be released during spring thaw to potentially contaminate surface water, soil and crops. Copyright 2010 Elsevier Ltd. All rights reserved.

  1. Advanced Multiple Aperture Seeing Profiler

    Science.gov (United States)

    Ren, Deqing; Zhao, Gang

    2016-10-01

    Measurements of the seeing profile of the atmospheric turbulence as a function of altitude are crucial for solar astronomical site characterization, as well as the optimized design and performance estimation of solar Multi-Conjugate Adaptive Optics (MCAO). Knowledge of the seeing distribution, up to 30 km, with a potential new solar observation site, is required for future solar MCAO developments. Current optical seeing profile measurement techniques are limited by the need to use a large facility solar telescope for such seeing profile measurements, which is a serious limitation on characterizing a site's seeing conditions in terms of the seeing profile. Based on our previous work, we propose a compact solar seeing profiler called the Advanced Multiple Aperture Seeing Profile (A-MASP). A-MASP consists of two small telescopes, each with a 100 mm aperture. The two small telescopes can be installed on a commercial computerized tripod to track solar granule structures for seeing profile measurement. A-MASP is extreme simple and portable, which makes it an ideal system to bring to a potential new site for seeing profile measurements.

  2. Steroid profiling in doping analysis

    NARCIS (Netherlands)

    Kerkhof, Daniël Henri van de

    2002-01-01

    Profiling androgens in urine samples is used in doping analysis for the detection of abused steroids of endogenous origin. These profiling techniques were originally developed for the analysis of testosterone, mostly by means of the ratio of testosterone to epitestosterone (T/E ratio). A study was p

  3. Doing Business Economy Profile 2016

    OpenAIRE

    World Bank Group

    2015-01-01

    This economy profile for Doing Business 2016 presents the 11 Doing Business indicators for Equatorial Guinea. To allow for useful comparison, the profile also provides data for other selected economies (comparator economies) for each indicator. Doing Business 2016 is the 13th edition in a series of annual reports measuring the regulations that enhance business activity and those that const...

  4. Doing Business Economy Profile 2016

    OpenAIRE

    World Bank Group

    2015-01-01

    This economy profile for Doing Business 2016 presents the 11 Doing Business indicators for Italy. To allow for useful comparison, the profile also provides data for other selected economies (comparator economies) for each indicator. Doing Business 2016 is the 13th edition in a series of annual reports measuring the regulations that enhance business activity and those that constrain it. Eco...

  5. Steel Energy and Environmental Profile

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2000-08-01

    Major steelmaking processes (from ironmaking through fabrication and forming) and their associated energy requirements have been profiled in this 2001 report (PDF 582 KB). This profile by Energetics, Inc. also describes the waste streams generated by each process and estimates annual emissions of CO2 and criteria pollutants.

  6. Linguistic Profiling of Language Disorders

    Science.gov (United States)

    Karanth, Prathibha

    2010-01-01

    The history of the evolution of language assessments for children and adults with language disorders is described briefly. This is followed by a discussion on language assessment of the clinical population with an emphasis on linguistic profiling, illustrated through the Linguistic Profile Test. Discourse analysis, in particular, is highlighted…

  7. Steroid profiling in doping analysis

    NARCIS (Netherlands)

    Kerkhof, Daniël Henri van de

    2001-01-01

    Profiling androgens in urine samples is used in doping analysis for the detection of abused steroids of endogenous origin. These profiling techniques were originally developed for the analysis of testosterone, mostly by means of the ratio of testosterone to epitestosterone (T/E ratio). A study was p

  8. Activity-based proteasome profiling

    NARCIS (Netherlands)

    Li, Nan

    2013-01-01

    The work described in this thesis is mainly focusing on setting up and application of a quantitative activity‐based proteasome profiling method. Chapter 1 provides a general introduction on the ubiquitin proteasome system (UPS) and activity‐based proteasome profiling. Chapter 2 is a literature

  9. Doing Business Economy Profile 2016

    OpenAIRE

    World Bank Group

    2015-01-01

    This economy profile for Doing Business 2016 presents the 11 Doing Business indicators for India. To allow for useful comparison, the profile also provides data for other selected economies (comparator economies) for each indicator. Doing Business 2016 is the 13th edition in a series of annual reports measuring the regulations that enhance business activity and those that constrain it. Eco...

  10. Steroid profiling in doping analysis

    NARCIS (Netherlands)

    Kerkhof, Daniël Henri van de

    2001-01-01

    Profiling androgens in urine samples is used in doping analysis for the detection of abused steroids of endogenous origin. These profiling techniques were originally developed for the analysis of testosterone, mostly by means of the ratio of testosterone to epitestosterone (T/E ratio). A study was

  11. Solution profiles for some simple combustion models

    Energy Technology Data Exchange (ETDEWEB)

    Bebernes, J.; Eberly, D.; Fulks, W.

    1986-01-01

    In this paper, the shape (solution profile) of the solutions of the Gelfand problem and the perturbed Gelfand problem are studied. Both of these models play a fundamental role in the mathematical theory of thermal explosions for finite rigid and gaseous systems. For rigid systems the physical processes are determined by a pointwise balance between chemical heat addition and heat loss by conduction. During the inductive period, with a duration measured by the conduction time scale of the bounding container, the heat released by the chemical reaction is redistributed by thermal conduction. As the temperature of the container increases, the reaction rate grows dramatically. Eventually, the characteristic time for heat release becomes significantly smaller than the conduction time in a well-defined hot spot embedded in the system. Then the heat released is used almost entirely to increase the hot-spot temperature. The purpose of this paper is to show that both models detect this hot-spot development in a very precise manner. This hot-spot development had previously been detected only numerically.

  12. Searching mixed DNA profiles directly against profile databases.

    Science.gov (United States)

    Bright, Jo-Anne; Taylor, Duncan; Curran, James; Buckleton, John

    2014-03-01

    DNA databases have revolutionised forensic science. They are a powerful investigative tool as they have the potential to identify persons of interest in criminal investigations. Routinely, a DNA profile generated from a crime sample could only be searched for in a database of individuals if the stain was from single contributor (single source) or if a contributor could unambiguously be determined from a mixed DNA profile. This meant that a significant number of samples were unsuitable for database searching. The advent of continuous methods for the interpretation of DNA profiles offers an advanced way to draw inferential power from the considerable investment made in DNA databases. Using these methods, each profile on the database may be considered a possible contributor to a mixture and a likelihood ratio (LR) can be formed. Those profiles which produce a sufficiently large LR can serve as an investigative lead. In this paper empirical studies are described to determine what constitutes a large LR. We investigate the effect on a database search of complex mixed DNA profiles with contributors in equal proportions with dropout as a consideration, and also the effect of an incorrect assignment of the number of contributors to a profile. In addition, we give, as a demonstration of the method, the results using two crime samples that were previously unsuitable for database comparison. We show that effective management of the selection of samples for searching and the interpretation of the output can be highly informative.

  13. MHD Natural Convection Flow of an incompressible electrically conducting viscous fluid through porous medium from a vertical flat plate

    Directory of Open Access Journals (Sweden)

    Dr. G. Prabhakara Rao,

    2015-04-01

    Full Text Available We consider a two-dimensional MHD natural convection flow of an incompressible viscous and electrically conducting fluid through porous medium past a vertical impermeable flat plate is considered in presence of a uniform transverse magnetic field. The governing equations of velocity and temperature fields with appropriate boundary conditions are solved by the ordinary differential equations by introducing appropriate coordinate transformations. We solve that ordinary differential equations and find the velocity profiles, temperature profile, the skin friction and nusselt number. The effects of Grashof number (Gr, Hartmann number (M and Prandtl number (Pr, Darcy parameter (D-1 on velocity profiles and temperature profiles are shown graphically.

  14. Building Better SDI Profiles for Users of Large, Multidisciplinary Data Bases.

    Science.gov (United States)

    Sprague, Robert J.; Frendenreich, L. Ben

    1978-01-01

    Reports an investigation conducted to improve the performance of SDI profiles in a large, complex data base that contains over a million references to scientific and technical literature, and uses full text indexing for retrieval. (Author/MBR)

  15. Continuous Resistivity Profile Tracklines of Data Collected from Cape Cod National Seashore, Feb. 28, 2006

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Continuous resistivity profiling (CRP) surveys were conducted at Cape Cod National Seashore in 2004 and 2006 in order to test hypotheses about groundwater flow under...

  16. Under the Microscope: A Profile of the Family Business in Ireland

    National Research Council Canada - National Science Library

    Naomi Birdthistle; Patricia Fleming

    2007-01-01

    ..., the management of the family business, and the training conducted by family businesses. The purpose of this paper is to examine these dynamics through the findings of primary research, thereby providing a profile of family businesses in Ireland...

  17. Continuous Resistivity Profile Tracklines of Data Collected from Cape Cod National Seashore, Feb. 28, 2006

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Continuous resistivity profiling (CRP) surveys were conducted at Cape Cod National Seashore in 2004 and 2006 in order to test hypotheses about groundwater flow...

  18. Processed Continuous Resistivity Profiles from Cape Cod National Seashore, Feb. 28, 2006

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Continuous resistivity profiling (CRP) surveys were conducted at Cape Cod National Seashore in 2004 and 2006 in order to test hypotheses about groundwater flow under...

  19. Processed Continuous Resistivity Profiles from Cape Cod National Seashore, May 17, 2004

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Continuous resistivity profiling (CRP) surveys were conducted at Cape Cod National Seashore in 2004 and 2006 in order to test hypotheses about groundwater flow under...

  20. Raw Continuous Resistivity Profiles from Cape Cod National Seashore, Feb. 28, 2006

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Continuous resistivity profiling (CRP) surveys were conducted at Cape Cod National Seashore in 2004 and 2006 in order to test hypotheses about groundwater flow under...

  1. Agricultural Pilot's Audiological Profile

    Directory of Open Access Journals (Sweden)

    Foltz, Lucas

    2010-09-01

    Full Text Available Introduction: The agricultural airplane pilot are daily exposed to intense noises, being susceptible to the noise-induced hearing loss (NIHL and its auditory and extra auditory effects. Objective: To analyze the audiological profile of this population, verifying the work's influence on its hearing. Method: It was realized a retrospective, individual, observational, and cross-sectional study through the data obtained by means of a questionnaire and audiometric thresholds of 41 agricultural pilots. To the statistical analysis were utilized the chi-square, Spearman, and Wilcoxon tests with significance level of 5%. Results: It was verified that 95,1% of the pilots use PPE ( personal protective equipment during flight and 58,5% have contact with pesticides. More than half of individuals referred to feel auditory and extra auditory symptoms, being the buzz the more frequent (29,1%. It has the occurrence of 29,3% of NIHL suggestive hearing loss and 68,3% of normality, taking this presence of unilateral notch in 24,4% and bilateral notch in 31,7%. It was found correlation statistically significant in the associations between time of service and the average of the acute frequencies in the right ear (p=0038, and in the left ear (p=0,010. It has a statistical tendency in the association between audiometric configuration and contact with pesticides (p=0,088. Conclusion: The hearing loss prevalence in this study was showed high. More than half of the sample has normal audiometric thresholds with notch configuration. Such data lead to the conclusion that the agricultural pilots, even with PPE use, they still suffer with the damages caused by noise, needing best proposals of hearing loss prevention.

  2. WISC-IV Profiles Are Associated with Differences in Symptomatology and Outcome in Children with ADHD

    Science.gov (United States)

    Thaler, Nicholas S.; Bello, Danielle T.; Etcoff, Lewis M.

    2013-01-01

    Objective: The current study investigated the Wechsler Intelligence Scale for Children-Fourth Edition (WISC-IV) cluster profiles of children with ADHD to examine the association between IQ profiles and diagnostic frequency, symptomatology, and outcome in this population. Method: Hierarchical cluster analysis was conducted on 189 children with a…

  3. CBCL Pediatric Bipolar Disorder Profile and ADHD: Comorbidity and Quantitative Trait Loci Analysis

    Science.gov (United States)

    McGough, James J.; Loo, Sandra K.; McCracken, James T.; Dang, Jeffery; Clark, Shaunna; Nelson, Stanley F.; Smalley, Susan L.

    2008-01-01

    The pediatric bipolar disorder profile of the Child Behavior checklist is used to differentiate patterns of comorbidity and to search for quantitative trait loci in multiple affected ADHD sibling pairs. The CBCL-PBD profiling identified 8 percent of individuals with severe psychopathology and increased rates of oppositional defiant, conduct and…

  4. Interface Profiles near Three-Phase Contact Lines in Electric Fields

    NARCIS (Netherlands)

    Buehrle, Juergen; Herminghaus, Stephan; Mugele, Frieder

    2003-01-01

    Long-range electrostatic fields deform the surface profile of a conductive liquid in the vicinity of the contact line. We have investigated the equilibrium profiles by balancing electrostatic and capillary forces locally at the liquid vapor interface. Numerical results show that the contact angle at

  5. CBCL Pediatric Bipolar Disorder Profile and ADHD: Comorbidity and Quantitative Trait Loci Analysis

    Science.gov (United States)

    McGough, James J.; Loo, Sandra K.; McCracken, James T.; Dang, Jeffery; Clark, Shaunna; Nelson, Stanley F.; Smalley, Susan L.

    2008-01-01

    The pediatric bipolar disorder profile of the Child Behavior checklist is used to differentiate patterns of comorbidity and to search for quantitative trait loci in multiple affected ADHD sibling pairs. The CBCL-PBD profiling identified 8 percent of individuals with severe psychopathology and increased rates of oppositional defiant, conduct and…

  6. Toxicologic profile of acrylonitrile.

    Science.gov (United States)

    Woutersen, R A

    1998-01-01

    Acrylonitrile is a monomer used extensively as a raw material in the manufacturing of acrylic fibers, plastics, synthetic rubbers, and acrylamide. It has been classified as a probable human carcinogen according to the results of numerous chronic rat bioassays. The present report summarizes the toxicity data on acrylonitrile and reviews available data concerning the mechanism (genetic versus epigenetic) by which acrylonitrile is carcinogenic in rats. From the evaluation of the relevant toxicity data, it can be concluded that acrylonitrile is indeed carcinogenic to rats after either oral or inhalational exposure. However, information on other mammalian species is lacking, and, moreover, the exact mechanism of the carcinogenic process is unclear. Therefore, it is recommended to conduct an additional long-term inhalation carcinogenicity study with acrylonitrile in mice, as well as studies into the mechanism by which acrylonitrile induces (brain) tumors in rats (genetic versus epigenetic).

  7. Lipid profile in hypothyroidism

    Energy Technology Data Exchange (ETDEWEB)

    Ramalho, A.; Medeiros, F.; Campos, C.; Medeiros, N.; Kuklinsky-Sobral, J.; Araujo, E. [Pernambuco Univ., Recife, PE (Brazil). Dept. de Biofisica e Radiobiologia

    1995-12-31

    The elevated levels of cholesterol (T-C), more specifically, the increase of carried cholesterol by low density protein (LDL-C), is the principal responsible to atheroma`s plaque. This elevated levels had been associated with chronic renal disease, bile pathway obstruction and hypothyroidism; this pathology is an important and frequent cause of reversible hyperlipidaemia by hormonal treatment. In 50 hypothyroidism cases diagnosed by radioimmunoassay method, principally primary form, have been met elevated levels of TC (68%), triglyceride (14%), LDL-C (78%), HDL-C (66%) and coronary heart disease (CHD) risk, LDL-C/HDL-C (82%). These percentages showed that the low concentration of thyroid hormones conduct to high concentration of LDL-C, which represents the risk factor to CHD, despite the increase of HDL-C. Thereby, the hypothyroidism must be always searched in hyperlipemic patients without apparent cause. (author). 17 refs., 3 tabs.

  8. Profiles Junior high School West Java in Education Learning Environment

    Directory of Open Access Journals (Sweden)

    NFN Nahadi

    2014-02-01

    Full Text Available Descriptive studies have been conducted on the existing junior high profile in West Java on Education Learning Environment. The study was conducted by purposive sampling and descriptive done to get an idea about the profile of SMP in West Java implementation of the learning environment. in junior high school in West Java. Research conducted by distributing questionnaires, and observations based on the indicators developed. Based on this research, it is known that, PLH learning in junior high school in West Java has been in force since 2007 after the enactment of the Governor of West Java on environmental education for junior high school students in West Java. Learning that lasts generally implemented in conventional teacher, and it is without any innovations. It has made learning the essential condition runs well, but has not lasted optimally.

  9. Synthesis of novel electrically conducting polymers: Potential conducting Langmuir-Blodgett films and conducting polymers on defined surfaces

    Science.gov (United States)

    Zimmer, Hans

    1993-01-01

    Based on previous results involving thiophene derived electrically conducting polymers in which it was shown that thiophene, 3-substituted thiophenes, furans, and certain oligomers of these compounds showed electrical conductivity after polymerization. The conductivity was in the order of up to 500 S/cm. In addition, these polymers showed conductivity without being doped and most of all they were practically inert toward ambient conditions. They even could be used in aqueous media. With these findings as a guide, a number of 3-long-chain-substituted thiophenes and 1-substituted-3-long-chain substituted pyrrols were synthesized as monomers for potential polymeric electrically conducting Langmuir-Blodgett films.

  10. Root hydraulic conductivity and adjustments in stomatal conductance: hydraulic strategy in response to salt stress in a halotolerant species.

    Science.gov (United States)

    Vitali, Victoria; Bellati, Jorge; Soto, Gabriela; Ayub, Nicolás D; Amodeo, Gabriela

    2015-11-24

    Recent advances at the molecular level are introducing a new scenario that needs to be integrated into the analysis of plant hydraulic properties. Although it is not yet clear to what extent this scenario alters the current proposal for the hydraulic circuit models, it introduces new insights when studying plants that are able to easily overcome water restrictions. In this context, our aim was to explore water adjustments in a halotolerant model (Beta vulgaris) by studying the coordination between the root in terms of root hydraulic conductivity (Lpr) and the shoot as reflected in the stomatal conductance (gs). The root water pathways were also analysed in terms of root suberization (apoplastic barrier) and aquaporin transcript levels (cell-to-cell pathway). Beta vulgaris showed the ability to rapidly lose (4 h) and gain (24 h) turgor when submitted to salt stress (200 mM). The reduction profile observed in Lpr and gs was consistent with a coupled process. The tuning of the root water flow involved small variations in the studied aquaporin's transcripts before anatomical modifications occurred. Exploring Lpr enhancement after halting the stress contributed to show not only a different profile in restoring Lpr but also the capacity to uncouple Lpr from gs. Beta vulgaris root plays a key role and can anticipate water loss before the aerial water status is affected.

  11. Direct current hopping conductance along DNA chain

    Institute of Scientific and Technical Information of China (English)

    Ma Song-Shan; Xu Hui; Liu Xiao-Liang; Li Ming-Jun

    2007-01-01

    This paper proposes a model of direct current(DC) electron hopping transport in DNA,in which DNA is considered as a binary one-dimensional disordered system.To quantitatively study the DC conductivity in DNA,it numerically calculates the DC conductivity of DNA chains with difierent parameter values.The result shows that the DC conductivity of DNA chain increases with the increase of temperature.And the conductivity of DNA chain is depended on the probability P.which represents the degree of compositional disorder in a DNA sequence to some extent.For P<0.5,the conductivity of DNA chain decreases with the increase of P,while for P≥0.5,the conductivity increases with the increase of p.The DC conductivity in DNA chain also varies with the change of the electric field,it presents non-Ohm's law conductivity characteristics.

  12. Electrical Resistance Tomography of Conductive Thin Films

    CERN Document Server

    Cultrera, Alessandro

    2016-01-01

    The Electrical Resistance Tomography (ERT) technique is applied to the measurement of sheet conductance maps of both uniform and patterned conductive thin films. Images of the sheet conductance spatial distribution, and local conductivity values are obtained. Test samples are tin oxide films on glass substrates, with electrical contacts on the sample boundary, some samples are deliberately patterned in order to induce null conductivity zones of known geometry while others contain higher conductivity inclusions. Four-terminal resistance measurements among the contacts are performed with a scanning setup. The ERT reconstruction is performed by a numerical algorithm based on the total variation regularization and the L-curve method. ERT correctly images the sheet conductance spatial distribution of the samples. The reconstructed conductance values are in good quantitative agreement with independent measurements performed with the van der Pauw and the four-point probe methods.

  13. Bonding and charge transfer plasmons of conductively bridged nanoparticles: The effects of junction conductance and nanoparticle morphology

    Science.gov (United States)

    Koya, Alemayehu Nana; Lin, Jingquan

    2016-09-01

    A detailed study of charge transfer plasmon properties of conductively bridged nanoparticles is essential for designing artificial molecules and developing plasmonic sensors. In this report, we demonstrate spectral tuning and control of local field responses of conductively bridged and compositionally homogeneous plasmonic nanoparticles of various shapes and sizes. The scattering spectral peaks of connected nanoparticles are tuned by controlling inter-particle feed-gap, junction conductance, and nanoparticle morphology. The far-field spectral responses are further tuned by increasing the number of nanoparticles from dimer to trimer, and a generalized expression for charge transfer plasmon peak shift with junction geometry is developed for various shapes of nanotrimers. The corresponding near-field distributions of the linked nanoparticles also exhibit remarkable features. Specifically, the local field profiles of dimer nanoparticles calculated at the charge transfer wavelengths show strong interaction between the nanoparticles. On the other hand, in the bridged symmetrical nanotrimers, the central nanoparticles act as a bridge and only the rest two of the nanoparticles show bright modes. These findings suggest that using conductively bridged nanoaggregates could play a significant role in tuning far-field spectral responses of plasmonic nanostructures for practical applications in molecular sensing.

  14. 39 CFR 447.21 - Prohibited conduct.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Prohibited conduct. 447.21 Section 447.21 Postal Service UNITED STATES POSTAL SERVICE PERSONNEL RULES OF CONDUCT FOR POSTAL EMPLOYEES Employee Conduct..., or for appointment in the U.S. Postal Service, when these activities are dependent on information...

  15. Ionic conduction of lithium hydride single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Pilipenko, G.I.; Oparin, D.V.; Zhuravlev, N.A.; Gavrilov, F.F.

    1987-09-01

    Using the electrical-conductivity- and NMR-measurement- methods, the ionic-conduction mechanism is established in stoichiometric lithium hydride single crystals. The activation energies of migration of anion- and cation-vacancies and the formation of Schottky-pair defects are determined. They assume that the mechanisms of self-diffusion and conductivity are different in lithium hydride.

  16. The Workshop on Conductive Polymers: Final Report

    Science.gov (United States)

    1985-10-01

    Reports are made by groups on: polyacetylene, polyphenylene, polyaniline, and related systems; molecular, crystallographic, and defect structures in conducting polymers; heterocyclic polymers; synthesis of new and improved conducting polymers; future applications possibilities for conducting polymers; and challenges for improved understanding of properties. (DLC)

  17. Electrically conducting polymers for aerospace applications

    Science.gov (United States)

    Meador, Mary Ann B.; Gaier, James R.; Good, Brian S.; Sharp, G. R.; Meador, Michael A.

    1991-01-01

    Current research on electrically conducting polymers from 1974 to the present is reviewed focusing on the development of materials for aeronautic and space applications. Problems discussed include extended pi-systems, pyrolytic polymers, charge-transfer systems, conductive matrix resins for composite materials, and prospects for the use of conducting polymers in space photovoltaics.

  18. 45 CFR 81.111 - Conduct.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Conduct. 81.111 Section 81.111 Public Welfare... 80 OF THIS TITLE Judicial Standards of Practice § 81.111 Conduct. Parties and their representatives are expected to conduct themselves with honor and dignity and observe judicial standards of practice...

  19. 36 CFR 2.34 - Disorderly conduct.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Disorderly conduct. 2.34... RESOURCE PROTECTION, PUBLIC USE AND RECREATION § 2.34 Disorderly conduct. (a) A person commits disorderly conduct when, with intent to cause public alarm, nuisance, jeopardy or violence, or knowingly or...

  20. 38 CFR 18b.90 - Conduct.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Conduct. 18b.90 Section 18b.90 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) PRACTICE AND... Practice § 18b.90 Conduct. Parties and their representatives are expected to conduct themselves with honor...

  1. 76 FR 15856 - Standards of Conduct

    Science.gov (United States)

    2011-03-22

    ... ADMINISTRATION 41 CFR Part 105-735 RIN 3090-AJ10 Standards of Conduct AGENCY: General Services Administration... standards of conduct. DATES: Effective Date: This final rule is effective March 22, 2011. FOR FURTHER..., November 1, 1995 which codified GSA's supplemental standards of ethical conduct in the new 5 CFR part 6701...

  2. 14 CFR 300.5 - Prohibited conduct.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Prohibited conduct. 300.5 Section 300.5 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) PROCEDURAL REGULATIONS RULES OF CONDUCT IN DOT PROCEEDINGS UNDER THIS CHAPTER § 300.5 Prohibited conduct. No person shall...

  3. 17 CFR 200.56 - Personal conduct.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Personal conduct. 200.56 Section 200.56 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION ORGANIZATION; CONDUCT AND ETHICS; AND INFORMATION AND REQUESTS Canons of Ethics § 200.56 Personal conduct. Appointment to...

  4. 32 CFR 776.5 - Judicial conduct.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Judicial conduct. 776.5 Section 776.5 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY MISCELLANEOUS RULES PROFESSIONAL CONDUCT... § 776.5 Judicial conduct. To the extent that it does not conflict with statutes, regulations, or this...

  5. 34 CFR 101.111 - Conduct.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Conduct. 101.111 Section 101.111 Education Regulations of the Offices of the Department of Education OFFICE FOR CIVIL RIGHTS, DEPARTMENT OF EDUCATION... Conduct. Parties and their representatives are expected to conduct themselves with honor and dignity and...

  6. Microwave Measurements of Moisture Distributions in the Upper Soil Profile

    Science.gov (United States)

    Sadeghi, A. M.; Hancock, G. D.; Waite, W. P.; Scott, H. D.; Rand, J. A.

    1984-07-01

    Laboratory and field experiments were conducted to investigate the ability of microwave remote sensing systems to detect the moisture status of a silt loam soil exhibiting abrupt changes in moisture content near the surface. Laboratory soil profiles were prepared with a discontinuous moisture boundary in the subsurface. Reflectivity measurements of these profiles were made with a bistatic reflectometer operating over the frequency ranges of 1-2 and 4-8 GHz (wavelength ranges of 30-15 and 7.5-3.75 cm, respectively). These measurements exhibited a well-developed coherent interference pattern in good agreement with a simple two-layer reflectivity model. Field measurements of bare soil surfaces were conducted for initially saturated profiles and continued for extended periods of drying. During drying, coherent interference patterns similar to those observed in the laboratory were detected. These appear to be due to steep moisture gradients occurring between drying layers near the surface. The field results were modeled by a five-segment linear moisture profile with one or two steep segments and a multilayer reflectivity program. Agreement between model and field response over the frequency range was used to estimate the depth of drying layers within the soil. These depths were monitored over the second and third drying cycles. Formation of the drying layers under field conditions appears to be influenced by drying time, tillage, and evaporative demand. In any case, it appears that the coherent effects caused by nonuniform moisture profiles may substantially affect the reflectivity of even rough soil surfaces.

  7. Pharmacokinetic profile of fesoterodine.

    Science.gov (United States)

    Malhotra, B; Guan, Z; Wood, N; Gandelman, K

    2008-11-01

    Fesoterodine is a new antimuscarinic agent for the treatment of overactive bladder. Following oral administration, fesoterodine is rapidly and extensively hydrolyzed by nonspecific esterases to its active moiety: 5-hydroxymethyl tolterodine (5-HMT). The cytochrome P450 (CYP) enzymes are not involved in the formation of 5-HMT; however, CYP2D6 and CYP3A4 provide 2 alternative pathways for further metabolism and inactivation of 5-HMT. Single oral doses of 4 mg, 8 mg or 12 mg of fesoterodine sustained-release tablets in the fasted state and 8 mg in a fed state. This single-center, open-label, randomized, crossover study investigated the effects of fesoterodine in healthy volunteers comprised of CYP2D6 extensive metabolizers (EMs; n = 16) and CYP2D6 poor metabolizers (PMs; n = 8) after either an overnight fast or a high-fat and high-calorie breakfast. Adverse events, vital signs, ECG recordings and laboratory tests were monitored for safety assessment. For the principal active moiety, 5-HMT, the maximum plasma concentration (Cmax), area under the concentration-time curve from time zero to time of last measurable concentration (AUC0-t) and amount excreted in urine (Ae) increased proportionally with dose in both EM and PM subjects. The mean Cmax and AUC0-t in PMs were approximately twice those observed in EMs. CYP2D6 status had no effect on time to reach Cmax (5 h), renal clearance (approximately 250 ml/min), or half-life (approximately 8 h). Fesoterodine was well tolerated at all doses. While the incidence of dry mouth increased from 8 - 12 mg, all occurrences were mild-to-moderate. Fesoterodine demonstrated a pharmacokinetic (PK) profile that was favorable for once-daily dosing. The systemic exposure to 5-HMT increased proportionally with dose and was about 2-fold higher in PMs compared with EMs. There was no clinically relevant effect of food on the PK of fesoterodine. Fesoterodine was well tolerated at all dose levels studied.

  8. Influence of mRNA decay rates on the computational prediction of transcription rate profiles from gene expression profiles

    Indian Academy of Sciences (India)

    Chi-Fang Chin; Arthur Chun-Chieh Shih; Kuo-Chin Fan

    2007-12-01

    condition specific data are significantly affected by mRNA decay rates. This analysis provides an opportunity for researchers to conduct future research on inferring regulatory networks computationally with available expression profiles under different biological conditions.

  9. Conducting polymers in electronic chemical sensors.

    Science.gov (United States)

    Janata, Jiri; Josowicz, Mira

    2003-01-01

    Conducting organic polymers have found two main kinds of application in electronics so far: as materials for construction of various devices and as selective layers in chemical sensors. In either case, interaction with ambient gases is critical. It may compromise the performance of a device based on conducting polymers, whereas it is beneficial in a sensor. Conductivity has been the primary property of interest. Work function--related to conductivity, but in principle a different property--has received only scant attention. Our aim here is to discuss the usability of conducting polymers in both types of electronic applications in light of these two parameters.

  10. Electrochemical Study of Conductive Gel Polymer

    Institute of Scientific and Technical Information of China (English)

    Zhaohui Li; Jing Jiang; Gangtie Lei

    2005-01-01

    @@ 1Introduction Conventional ion-conducting polymer consists of electrolyte salt and polymer matrix, so-called salt-inpolymer. It possesses lower conductivity because the migration of ions depends on the motion of polymer segmental. To increase the ionic conductivity, a kind of gel polymer film (GPF) was prepared by in situ polymerization of methyl methacrylate (MMA) monomer in room-temperature ionic liquid(RTIL), 1-butyl-3-methylimidazolium hexafluorophosphate (BMIPF6). Due to immeasurably low vapor pressure, high ionic conductivity, and greater thermal and electrochemical stability, BMIPF6 is suitable electrolyte salts for ion-conducting polymer.

  11. Inversion of soil electrical conductivity data to estimate layered soil properties

    Science.gov (United States)

    CBulk apparent soil electrical conductivity (ECa) sensors respond to multiple soil properties, including clay content, water content, and salt content (i.e., salinity). They provide a single sensor value for an entire soil profile down to a sensor-dependent measurement depth, weighted by a nonlinear...

  12. Heat transfer in a gray tube with forced convection, internal radiation and axial wall conduction

    Science.gov (United States)

    Chung, B. T. F.; Thompson, J. E.

    1983-01-01

    A method of successive approximations is employed to solve the problem of heat transfer to a transparent gas flowing through a radiating-conducting tube with turbulent forced convection between the tube wall and the gas, and with energy generation in the wall. Emphasis is given to the effect of emissivity of the wall to the tube and gas temperature profiles.

  13. Temperament and Personality as Potential Factors in the Development and Treatment of Conduct Disorders.

    Science.gov (United States)

    Center, David; Kemp, Dawn

    2003-01-01

    This article examines the development of conduct disorder (CD) in children and adolescents using Hans Eysenck's biosocial theory of personality. Eysenck's antisocial behavior hypothesis is discussed and intervention suggestions based on this theory are presented. The interactions of temperament-based personality profiles with interventions for CD…

  14. The symmetry of single-molecule conduction.

    Science.gov (United States)

    Solomon, Gemma C; Gagliardi, Alessio; Pecchia, Alessandro; Frauenheim, Thomas; Di Carlo, Aldo; Reimers, Jeffrey R; Hush, Noel S

    2006-11-14

    We introduce the conductance point group which defines the symmetry of single-molecule conduction within the nonequilibrium Green's function formalism. It is shown, either rigorously or to within a very good approximation, to correspond to a molecular-conductance point group defined purely in terms of the properties of the conducting molecule. This enables single-molecule conductivity to be described in terms of key qualitative chemical descriptors that are independent of the nature of the molecule-conductor interfaces. We apply this to demonstrate how symmetry controls the conduction through 1,4-benzenedithiol chemisorbed to gold electrodes as an example system, listing also the molecular-conductance point groups for a range of molecules commonly used in molecular electronics research.

  15. High frequency conductivity in carbon nanotubes

    Directory of Open Access Journals (Sweden)

    S. S. Abukari

    2012-12-01

    Full Text Available We report on theoretical analysis of high frequency conductivity in carbon nanotubes. Using the kinetic equation with constant relaxation time, an analytical expression for the complex conductivity is obtained. The real part of the complex conductivity is initially negative at zero frequency and become more negative with increasing frequency, until it reaches a resonance minimum at ω ∼ ωB for metallic zigzag CNs and ω < ωB for armchair CNs. This resonance enhancement is indicative for terahertz gain without the formation of current instabilities induced by negative dc conductivity. We noted that due to the high density of states of conduction electrons in metallic zigzag carbon nanotubes and the specific dispersion law inherent in hexagonal crystalline structure result in a uniquely high frequency conductivity than the corresponding values for metallic armchair carbon nanotubes. We suggest that this phenomenon can be used to suppress current instabilities that are normally associated with a negative dc differential conductivity.

  16. Charge-transport model for conducting polymers

    Science.gov (United States)

    Dongmin Kang, Stephen; Jeffrey Snyder, G.

    2016-11-01

    The growing technological importance of conducting polymers makes the fundamental understanding of their charge transport extremely important for materials and process design. Various hopping and mobility edge transport mechanisms have been proposed, but their experimental verification is limited to poor conductors. Now that advanced organic and polymer semiconductors have shown high conductivity approaching that of metals, the transport mechanism should be discernible by modelling the transport like a semiconductor with a transport edge and a transport parameter s. Here we analyse the electrical conductivity and Seebeck coefficient together and determine that most polymers (except possibly PEDOT:tosylate) have s = 3 and thermally activated conductivity, whereas s = 1 and itinerant conductivity is typically found in crystalline semiconductors and metals. The different transport in polymers may result from the percolation of charge carriers from conducting ordered regions through poorly conducting disordered regions, consistent with what has been expected from structural studies.

  17. Test of the Additivity Principle for Current Fluctuations in a Model of Heat Conduction

    Science.gov (United States)

    Hurtado, Pablo I.; Garrido, Pedro L.

    2009-06-01

    The additivity principle allows to compute the current distribution in many one-dimensional (1D) nonequilibrium systems. Using simulations, we confirm this conjecture in the 1D Kipnis-Marchioro-Presutti model of heat conduction for a wide current interval. The current distribution shows both Gaussian and non-Gaussian regimes, and obeys the Gallavotti-Cohen fluctuation theorem. We verify the existence of a well-defined temperature profile associated to a given current fluctuation. This profile is independent of the sign of the current, and this symmetry extends to higher-order profiles and spatial correlations. We also show that finite-time joint fluctuations of the current and the profile are described by the additivity functional. These results suggest the additivity hypothesis as a general and powerful tool to compute current distributions in many nonequilibrium systems.

  18. Safety profile of the 9-valent HPV vaccine

    DEFF Research Database (Denmark)

    Moreira, Edson D; Block, Stan L; Ferris, Daron G

    2016-01-01

    OBJECTIVES: The overall safety profile of the 9-valent human papillomavirus (9vHPV) vaccine was evaluated across 7 Phase III studies, conducted in males and females (nonpregnant at entry), 9 to 26 years of age. METHODS: Vaccination was administered as a 3-dose regimen at day 1, and months 2 and 6...... to that of the qHPV vaccine; injection-site AEs were more common with 9vHPV vaccine. Its additional coverage and safety profile support widespread 9vHPV vaccination....

  19. Feeding profiles of tame moose

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report is on the feeding profiles of tame moose. 3 moose were observed for 99 hours while in natural range, each bite plant species, browse conditions and size...

  20. Monitor of SC beam profiles

    CERN Multimedia

    1977-01-01

    A high-resolution secondary emission grid for the measurement of SC beam profiles. Modern techniques of metal-ceramic bonding, developed for micro-electronics, have been used in its construction. (See Annual Report 1977 p. 105 Fig. 12.)

  1. CDBG Performance Profiles - PY12

    Data.gov (United States)

    Department of Housing and Urban Development — These profiles significantly increase the amount of information that is available about the performance of CDBG grantees. It is important that our grantees, all our...

  2. Distinguishing ichthyoses by protein profiling.

    Directory of Open Access Journals (Sweden)

    Robert H Rice

    Full Text Available To explore the usefulness of protein profiling for characterization of ichthyoses, we here determined the profile of human epidermal stratum corneum by shotgun proteomics. Samples were analyzed after collection on tape circles from six anatomic sites (forearm, palm, lower leg, forehead, abdomen, upper back, demonstrating site-specific differences in profiles. Additional samples were collected from the forearms of subjects with ichthyosis vulgaris (filaggrin (FLG deficiency, recessive X-linked ichthyosis (steroid sulfatase (STS deficiency and autosomal recessive congenital ichthyosis type lamellar ichthyosis (transglutaminase 1 (TGM1 deficiency. The ichthyosis protein expression patterns were readily distinguishable from each other and from phenotypically normal epidermis. In general, the degree of departure from normal was lower from ichthyosis vulgaris than from lamellar ichthyosis, parallel to the severity of the phenotype. Analysis of samples from families with ichthyosis vulgaris and concomitant modifying gene mutations (STS deficiency, GJB2 deficiency permitted correlation of alterations in protein profile with more complex genetic constellations.

  3. Distinguishing ichthyoses by protein profiling.

    Science.gov (United States)

    Rice, Robert H; Bradshaw, Katie M; Durbin-Johnson, Blythe P; Rocke, David M; Eigenheer, Richard A; Phinney, Brett S; Schmuth, Matthias; Gruber, Robert

    2013-01-01

    To explore the usefulness of protein profiling for characterization of ichthyoses, we here determined the profile of human epidermal stratum corneum by shotgun proteomics. Samples were analyzed after collection on tape circles from six anatomic sites (forearm, palm, lower leg, forehead, abdomen, upper back), demonstrating site-specific differences in profiles. Additional samples were collected from the forearms of subjects with ichthyosis vulgaris (filaggrin (FLG) deficiency), recessive X-linked ichthyosis (steroid sulfatase (STS) deficiency) and autosomal recessive congenital ichthyosis type lamellar ichthyosis (transglutaminase 1 (TGM1) deficiency). The ichthyosis protein expression patterns were readily distinguishable from each other and from phenotypically normal epidermis. In general, the degree of departure from normal was lower from ichthyosis vulgaris than from lamellar ichthyosis, parallel to the severity of the phenotype. Analysis of samples from families with ichthyosis vulgaris and concomitant modifying gene mutations (STS deficiency, GJB2 deficiency) permitted correlation of alterations in protein profile with more complex genetic constellations.

  4. State Cancer Profiles Web site

    Data.gov (United States)

    U.S. Department of Health & Human Services — The State Cancer Profiles (SCP) web site provides statistics to help guide and prioritize cancer control activities at the state and local levels. SCP is a...

  5. Profile Viewer (ProVu)

    Data.gov (United States)

    Department of Transportation — ProVu is a viewer which allows Federal, State, and private industry users to electronically analyze standard motor carrier safety profile reports available from the...

  6. Automotive Refinishing Industry: Isocyanates Profile

    Science.gov (United States)

    The isocyanates profile document is part of the DfE Auto Refinishing Shop Project and is intended to provide information on refinishing, control technologies, and regulatory status regarding isocyanate compounds

  7. Metropolitan Lima: area profile.

    Science.gov (United States)

    Hakkert, R

    1986-11-01

    This profile of metropolitan Lima, Peru, covers administrative divisions; population growth; age distribution; ethnicity and religion; housing and households; education and health care; economic activity, income, and consumption; transport and communication; and sources of information. Nearly 30% of Peru's entire population and 42% of its urban population live in Lima. The trend continues, yet Lima's urban primacy is waning due to the growth of some regional centers like Trujillo and Chimbote. Lima is still almost 10 times as large as the country's next ranking cities, Trujillo on the northern coast and Arequipa in the south. Peru's main administrative divisions are the 24 departments, of which the Department of Lima is one. These departments are further divided into 156 provinces. Greater Lima consists of 2 such provinces, the province of Lima and the constitutional province of Callao. Although the population of Lima continues to grow, its rate of growth slowed from about 5.5% during the 1960s to about 3.9% in the 1970s. Current projections estimate a metropolitan population of 6.7 million by 1990. On the whole, Lima's age structure is somewhat older than that of the rest of Peru. The median age of the population is 22.3 years, compared to a national figure of 20.4. The proportion of persons over age 65 is only 3.6%, lower than the national average of 4.1%, due to the tendency of in-migration to concentrate people of intermediate ages in the cities. Almost 400,000 inhabitants of greater Lima are bilingual in Spanish and an indigenous language. As elsewhere in Peru, the dominant religion is Roman Catholicism. Lima is a spread out city with few high rise buildings due to the danger of earthquakes. Only 12% of Lima's households are found in apartment buildings. As in other cities of Latin America, the formal housing market is beyond the reach of a major segment of the population. Consequently, much of the urban settlement has occurred through informal self

  8. Electrical conductivity, ionic conductivity, optical absorption, and gas separation properties of ionically conductive polymer membranes embedded with Si microwire arrays

    OpenAIRE

    Spurgeon, Joshua M.; Walter, Michael G.; Zhou, Junfeng; Kohl, Paul A.; Lewis, Nathan S.

    2011-01-01

    The optical absorption, ionic conductivity, electronic conductivity, and gas separation properties have been evaluated for flexible composite films of ionically conductive polymers that contain partially embedded arrays of ordered, crystalline, p-type Si microwires. The cation exchange ionomer Nafion, and a recently developed anion exchange ionomer, poly(arylene ether sulfone) that contains quaternary ammonium groups (QAPSF), produced composite microwire array/ionomer membrane films that were...

  9. Hereditary profiles of disorderly transcription?

    Directory of Open Access Journals (Sweden)

    Simons Johannes WIM

    2006-04-01

    Full Text Available Abstract Background Microscopic examination of living cells often reveals that cells from some cell strains appear to be in a permanent state of disarray without obvious reason. In all probability such a disorderly state affects cell functioning. The aim of this study was to establish whether a disorderly state could occur that adversely affects gene expression profiles and whether such a state might have biomedical consequences. To this end, the expression profiles of the 14 genes of the proteasome derived from the GEO SAGE database were utilized as a model system. Results By adopting the overall expression profile as the standard for normal expression, deviation in transcription was frequently observed. Each deviating tissue exhibited its own characteristic profile of over-expressed and under-expressed genes. Moreover such a specific deviating profile appeared to be epigenetic in origin and could be stably transmitted to a clonal derivative e.g. from a precancerous normal tissue to its tumor. A significantly greater degree of deviation was observed in the expression profiles from the tumor tissues. The changes in the expression of different genes display a network of interdependencies. Therefore our hypothesis is that deviating profiles reflect disorder in the localization of genes within the nucleus The underlying cause(s for these disorderly states remain obscure; it could be noise and/or deterministic chaos. Presence of mutational damage does not appear to be predominantly involved. Conclusion As disturbances in expression profiles frequently occur and have biomedical consequences, its determination could prove of value in several fields of biomedical research. Reviewers This article was reviewed by Trey Ideker, Itai Yanai and Stephan Beck

  10. PROFIL PENGEMBANGAN PROFESIONAL GURU

    Directory of Open Access Journals (Sweden)

    Budi Sutrisno

    2015-07-01

    Full Text Available This study is to describe the developent of pedagogical competence, professional competence, personal competence, and social competence of the International Standard Pioneer School in State Senior High School 1 Temanggung. The focus in this study were teacher professional development  of the international  standard pioneer school in State Senior High School 1 Temanggung, by observing the development of pedagogical competence, competence professional, personal competence, and social competence of the international   standard pioneer school in State Senior High School 1 Temanggung. The study is the qualitative research with the ethnography approach. This research was conducted in State Senior High School 1 Temanggung year 2010/2011, the source of the data  obtained  from  the  principal,  vice  principal,  head  of  the  International  Standard Pioneer School programs, teachers, librarians, and students. Data collected by in-depth interviews, observation, and documentation. Validity of the data was done by triangulation techniques. Analysis of the data used is a model of interactive analysis.   The results of this research can be concluded that the development of pedagogical competence of teachers  of the international   standard pioneer school in State Senior High School 1 Temanggung teachers include longer emphasizes the management aspects of learning, the development of  professional competence include the  aspect  of  improving the  skills  and  aspects of knowledge, competence development aspects of personality include mental, spiritual, and the  formation  of  professional  ethics  that  provides  a  change  in  attitude  teachers  in managing learning, while the component that was developed in the social competence includes the development of emotional intelligence, and development of teachers' roles in professional organizations (MGMP. Developed in the fourth aspect is the competence of the teacher

  11. Importance of layer thermal conductivity on the sharpness of patterns produced by laser interference

    Energy Technology Data Exchange (ETDEWEB)

    Peláez, R.J., E-mail: rpelaez@io.cfmac.csic.es [Laser Processing Group, Instituto de Optica, CSIC, Serrano 121, 28006 Madrid (Spain); Afonso, C.N. [Laser Processing Group, Instituto de Optica, CSIC, Serrano 121, 28006 Madrid (Spain); Škereň, M. [Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Brehova 7, 115 19 Prague 1 (Czech Republic); Bulíř, J. [Institute of Physics, ASCR, v.v.i., Na Slovance 2, Prague (Czech Republic)

    2016-06-30

    Highlights: • Temperature profile matches laser intensity profile in poor thermally conducting layers. • Patterns produced in poor thermally conducting layers have sharp interfaces. • Lateral heat flow smears the temperature profile in thermally conducting layers. • Both liquid and solid state dewetting occurs upon patterning thermally conducting layers. • The thermal conductivity of layers limits the minimum period achievable. - Abstract: In this work, we compare patterns produced in Ag layers having similar thickness in the range 8.3–10.8 nm but having different initial nanostructure, i.e. behaving either as discontinuous or continuous layers and thus having very different thermal conductivities. The patterns are produced by exposing a phase mask to an excimer laser operating at 193 nm and using a projection optics that leads to similar fringed patterns with periods in the range 6.3–6.7 μm. The layer breaks up into isolated NPs due to laser induced melting at the regions around the intensity maxima sites. The resulting fringes have sharp interfaces in the case of discontinuous layers while a variety of regions across the pattern with no sharp interfaces are produced in the case of continuous layers. The results show that while the temperature distribution across the pattern matches almost perfectly the laser beam intensity profile for the former case, it becomes smeared due to lateral heat flow for the latter case. These results provide evidences for significant heating at the intensity minima sites that lead to solid-state dewetting and will eventually limit the minimum period achievable in the case of continuous metal layers or thermally conducting layers.

  12. Profile of cystic fibrosis

    Directory of Open Access Journals (Sweden)

    Mona M. El-Falaki

    2014-09-01

    Full Text Available It was generally believed that Cystic fibrosis (CF is rare among Arabs; however, the few studies available from Egypt and other Arabic countries suggested the presence of many undiagnosed patients. The aim of the present study was to determine the frequency of CF patients out of the referred cases in a single referral hospital in Egypt. A total of 100 patients clinically suspected of having CF were recruited from the CF clinic of the Allergy and Pulmonology Unit, Children’s Hospital, Cairo University, Egypt, throughout a 2 year period. Sweat chloride testing was done for all patients using the Wescor macroduct system for collection of sweat. Quantitative analysis for chloride was then done by the thiocyanate colorimetric method. Patients positive for sweat chloride (⩾60 mmol/L were tested for the ΔF508 mutation using primer specific PCR for cystic fibrosis transmembrane conductance regulator (CFTR gene. Thirty-six patients (36% had a positive sweat chloride test. The main clinical presentations in patients were chronic cough in 32 (88.9%, failure to thrive in 27 (75%, steatorrhea in 24 (66.7%, and hepatobiliary involvement in 5 (13.9%. Positive consanguinity was reported in 50% of CF patients. Thirty-two patients were screened for ΔF508 mutation. Positive ΔF508 mutation was detected in 22 (68.8% patients, 8 (25% were homozygous, 14 (43.8% were heterozygous, and 10 (31.3% tested were negative. CF was diagnosed in more than third of patients suspected of having the disease on clinical grounds. This high frequency of CF among referred patients indicates that a high index of suspicion and an increasing availability of diagnostic tests lead to the identification of a higher number of affected individuals.

  13. HPLC profiling of Phellinus linteus.

    Science.gov (United States)

    Kojima, Kazuo; Ogihara, Yukio; Sakai, Yoshimichi; Mizukami, Hajime; Nagatsu, Akito

    2008-10-01

    HPLC chromatograms of MeOH extracts from a fruit body of the wild-grown P. linteus (natural fruit body), from cultivated fungus (cultivated fruit body), and from the cultured mycelia were compared. The extract prepared from the natural fruit bodies revealed a typical HPLC profile referred to as type 1 with a major peak corresponding to meshimakobnol A (1) together with two minor peaks of hypholomine B (3) and inoscavin A (4); the cultivated fruit bodies exhibited a profile referred to as type 2 with major peaks corresponding to 3 and 4 and a minor peak of 1, and the cultured mycelia showed a profile referred to as type 3 without any of these peaks. We also analyzed HPLC chromatograms of commercial products of P. linteus obtained in the markets. Most of the products claimed to be natural fruit bodies exhibited type 1 profiles, except for one product having an intermediate HPLC profile between type 1 and type 2. The products claimed to be cultivated fruit bodies and cultured mycelia revealed type 2 and type 3 profiles, respectively. The present results indicate that the HPLC chromatogram of the methanol extract of P. linteus can be used as a fingerprint to identify whether the product is from natural fruit bodies, cultivated fruit bodies, or cultured mycelia.

  14. Towards Social Profile Based Overlays

    CERN Document Server

    Wolinsky, David Isaac; Boykin, P Oscar; Figueiredo, Renato

    2010-01-01

    Online social networking has quickly become one of the most common activities of Internet users. As social networks evolve, they encourage users to share more information, requiring the users, in turn, to place more trust into social networks. Peer-to-peer (P2P) overlays provide an environment that can return ownership of information, trust, and control to the users, away from centralized third-party social networks. In this paper, we present a novel concept, social profile overlays, which enable users to share their profile only with trusted peers in a scalable, reliable, and private manner. Each user's profile consists of a unique private, secure overlay, where members of that overlay have a friendship with the overlay owner. Profile data is made available without regard to the online state of the profile owner through the use of the profile overlay's distributed data store. Privacy and security are enforced through the use of a public key infrastructure (PKI), where the role of certificate authority (CA) i...

  15. Multifunctional conducting fibres with electrically controlled release of ciprofloxacin.

    Science.gov (United States)

    Esrafilzadeh, Dorna; Razal, Joselito M; Moulton, Simon E; Stewart, Elise M; Wallace, Gordon G

    2013-08-10

    We hereby present a new method of producing coaxial conducting polymer fibres loaded with an antibiotic drug that can then be subsequently released (or sustained) in response to electrical stimulation. The method involves wet-spinning of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) fibre, which served as the inner core to the electropolymerised outer shell layer of polypyrrole (Ppy). Ciprofloxacin hydrochloride (Cipro) was selected as the model drug and as the dopant in the Ppy synthesis. The release of Cipro in phosphate buffered saline (PBS) from the fibres was controlled by switching the redox state of Ppy.Cipro layer. Released Cipro under passive and stimulated conditions were tested against Gram positive (Streptococcus pyogenes) and Gram negative (Escherichia coli) bacteria. Significant inhibition of bacterial growth was observed against both strains tested. These results confirm that Cipro retains antibacterial properties during fibre fabrication and electrochemically controlled release. In vitro cytotoxicity testing utilising the neural B35 cell line confirmed the cytocompatibility of the drug loaded conducting fibres. Electrical conductivity, cytocompatibility and tuning release profile from this flexible fibre can lead to promising bionic applications such as neuroprosthetics and localised drug delivery. Copyright © 2013 Elsevier B.V. All rights reserved.

  16. Lunar electrical conductivity, permeability and temperature from Apollo magnetometer experiments

    Science.gov (United States)

    Dyal, P.; Parkin, C. W.; Daily, W. D.

    1977-01-01

    Magnetometers were deployed at four Apollo sites on the moon to measure remanent and induced lunar magnetic fields. Measurements from this network of instruments were used to calculate the electrical conductivity, temperature, magnetic permeability, and iron abundance of the lunar interior. The measured lunar remanent fields range from 3 gammas minimum at the Apollo 15 site to 327 gammas maximum at the Apollo 16 site. Simultaneous magnetic field and solar plasma pressure measurements show that the remanent fields at the Apollo 12 and 16 sites interact with, and are compressed by, the solar wind. Remanent fields at Apollo 12 and Apollo 16 are increased 16 gammas and 32 gammas, respectively, by a solar plasma bulk pressure increase of 1.5 X 10 to the -7th power dynes/sq cm. Global lunar fields due to eddy currents, induced in the lunar interior by magnetic transients, were analyzed to calculate an electrical conductivity profile for the moon. From nightside magnetometer data in the solar wind it was found that deeper than 170 km into the moon the conductivity rises from .0003 mhos/m to .10 mhos/m at 100 km depth. Recent analysis of data obtained in the geomagnetic tail, in regions free of complicating plasma effects, yields results consistent with nightside values.

  17. Finite-element technique applied to heat conduction in solids with temperature dependent thermal conductivity

    Science.gov (United States)

    Aguirre-Ramirez, G.; Oden, J. T.

    1969-01-01

    Finite element method applied to heat conduction in solids with temperature dependent thermal conductivity, using nonlinear constitutive equation for heat ABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGH

  18. Theory of electrical conductivities of ferrogels

    CERN Document Server

    Huang, J P

    2004-01-01

    Conductive organic polymers can be formulated with polymers that incorporate fine dispersed metallic particles. In this work, we present a general model for ferrogels which are chemically cross-linked polymer networks swollen with a ferrofluid. Our aim is to study the effect of the shape and/or material (conductivity) anisotropy on the effective electrical conductivity of the ferrogel in the presence of an external magnetic field. Our theory can reproduce the known results, and provides a link between the particle property and orientation distribution and the effective electrical conductivity. To this end, we find that material (conductivity) anisotropies are more important to yield a high effective electrical conductivity than shape anisotropies, while magnetic fields can offer a correction.

  19. Effective Thermal Conductivity of Corrugated Insulating Materials

    Science.gov (United States)

    Yamada, Etsuro; Kato, Masayasu; Tomikawa, Takayuki; Takahashi, Kaneko

    The effective thermal conductivity of corrugated insulating materials which are made by polypropylene or polycarbonate have been measured by employing steady state comparison method for several specimen having various thickness and specific weight. The thermal conductivity of them evaluated are also by using the thermal resistance models, and are compared with above measured values and raw materials' conductivity. The main results obtained in this paper are as follows: (1) In regard to the specimen in this paper, the effective thermal conductivity increases with increasing temperature, but the increasing rate of them is small. (2) There are considerable differences between the measured values and the predicted ones that are estimated by using the thermal resistance model in which heat flow by conduction only. This differences increase with increasing specimens' thickness. This difference become extinct by considering the coexistence heat flow of conduction and radiation in the air phase of specimen. (3) The thermal resistance of specimen increases linearly with increasing specimens' thickness.

  20. Hopping models for ion conduction in noncrystals

    DEFF Research Database (Denmark)

    Dyre, Jeppe; Schrøder, Thomas

    2007-01-01

    Ion conduction in noncrystals (glasses, polymers, etc) has a number of properties in common. In fact, from a purely phenomenological point of view, these properties are even more widely observed: ion conduction behaves much like electronic conduction in disordered materials (e.g., amorphous...... semiconductors). These universalities are subject of much current interest, for instance interpreted in the context of simple hopping models. In the present paper we first discuss the temperature dependence of the dc conductivity in hopping models and the importance of the percolation phenomenon. Next......, the experimental (quasi)universality of the ac conductivity is discussed. It is shown that hopping models are able to reproduce the experimental finding that the response obeys time-temperature superposition, while at the same time a broad range of activation energies is involved in the conduction process. Again...

  1. Thermal conductivity of nanoscale thin nickel films

    Institute of Scientific and Technical Information of China (English)

    YUAN Shiping; JIANG Peixue

    2005-01-01

    The inhomogeneous non-equilibrium molecular dynamics (NEMD) scheme is applied to model phonon heat conduction in thin nickel films. The electronic contribution to the thermal conductivity of the film is deduced from the electrical conductivity through the use of the Wiedemann-Franz law. At the average temperature of T = 300 K, which is lower than the Debye temperature ()D = 450 K,the results show that in a film thickness range of about 1-11 nm, the calculated cross-plane thermal conductivity decreases almost linearly with the decreasing film thickness, exhibiting a remarkable reduction compared with the bulk value. The electrical and thermal conductivities are anisotropic in thin nickel films for the thickness under about 10 nm. The phonon mean free path is estimated and the size effect on the thermal conductivity is attributed to the reduction of the phonon mean free path according to the kinetic theory.

  2. VARIABILITY OF HYDRAULIC CONDUCTIVITY DUE TO MULTIPLE FACTORS

    Directory of Open Access Journals (Sweden)

    Sanjit K. Deb

    2012-01-01

    Full Text Available Soil properties are greatly influenced by intrinsic factors of soil formation as well as extrinsic factors associated with land use and management and vary both in time and space. Intrinsic variability is caused by the pedogenesis and usually takes place at large time scales. The variability caused by extrinsic factors could take effect relatively quickly and could not be treated as regionalized. Saturated hydraulic conductivity is one of the most important soil properties for soil-water-plant interactions, water and contaminant movement and retention through the soil profile. It is a critically important parameter for estimation of various other soil hydrological parameters necessary for modeling flow through the naturally unsaturated vadose zone. Among different soil hydrological properties, saturated hydraulic conductivity is reported to have the greatest statistical variability, which is associated with soil types, land uses, positions on landscape, depths, instruments and methods of measurement and experimental errors. The variability of saturated hydraulic conductivity has a profound influence on the overall hydrology of the soil system. Therefore, focus of this review is centered on the variability of saturated/unsaturated hydraulic conductivity due to a large number of factors. This study reviews recent experimental and field studies addressing the measurements and variability of hydraulic conductivity. A synthesis of a large amount of data available in literature is presented and the possible sources of the variability and its implications are discussed. The variability of a soil hydraulic conductivity can be expressed by range, interquartile range, variance and standard deviation, coefficient of variation, skewness and kurtosis. The spatial and temporal variability of hydraulic conductivity and the influences of sample support, measurement devices/methods, soils, land uses and agricultural management on hydraulic conductivity are

  3. SMi's Conducting Clinical Trials in Europe.

    Science.gov (United States)

    Jago, Charlotte

    2009-12-01

    The Conducting Clinical Trials in Europe meeting, held in London, included topics covering new developments in the field of clinical trials and recommendations on how to best conduct a trial. This conference report highlights selected presentations on the state of affairs of trials in Europe, conducting trials in emerging markets, strategies for improving trials, trial design options, peri-approval and pediatric trials, and the role of key players, such as physicians. Company perspectives from Pfizer Inc and Nycomed are also included.

  4. Anisotropic Thermal Conductivity of Exfoliated Black Phosphorus.

    Science.gov (United States)

    Jang, Hyejin; Wood, Joshua D; Ryder, Christopher R; Hersam, Mark C; Cahill, David G

    2015-12-22

    The anisotropic thermal conductivity of passivated black phosphorus (BP), a reactive two-dimensional material with strong in-plane anisotropy, is ascertained. The room-temperature thermal conductivity for three crystalline axes of exfoliated BP is measured by time-domain thermo-reflectance. The thermal conductivity along the zigzag direction is ≈2.5 times higher than that of the armchair direction.

  5. Electrical Conductivity of Aluminium Alloy Foams

    Institute of Scientific and Technical Information of China (English)

    凤仪; 郑海务; 朱震刚; 祖方遒

    2002-01-01

    Closed-cell aluminium alloy foams were produced using the powder metallurgical technique. The effect of porosityand cell diameter on the electrical conductivity of foams was investigated and the results were compared with anumber of models. It was found that the percolation theory can be successfully applied to describe the dependenceof the electrical conductivity of aluminium alloy foams on the relative density. The cell diameter has a negligibleeffect on the electrical conductivity of foams.

  6. Corrosion Protection of Electrically Conductive Surfaces

    OpenAIRE

    Jian Song; Liangliang Wang; Andre Zibart; Christian Koch

    2012-01-01

    The basic function of the electrically conductive surface of electrical contacts is electrical conduction. The electrical conductivity of contact materials can be largely reduced by corrosion and in order to avoid corrosion, protective coatings must be used. Another phenomenon that leads to increasing contact resistance is fretting corrosion. Fretting corrosion is the degradation mechanism of surface material, which causes increasing contact resistance. Fretting corrosion occurs when there is...

  7. The thermal conductivity of clustered nanocolloids

    Directory of Open Access Journals (Sweden)

    Saba Lotfizadeh

    2014-06-01

    Full Text Available We quantify the effect of clustering on the thermal conductivity of colloidal dispersions using silane-treated silica, a system engineered to exhibit reversible clustering under well-controlled conditions. We show that the thermal conductivity increases monotonically with cluster size and spans the entire range between the two limits of Maxwell's theory. The results, corroborated by numerical simulation, demonstrate that large increases of the thermal conductivity of colloidal dispersions are possible, yet fully within the predictions of classical theory.

  8. Thermal conductivity analysis of lanthanum doped manganites

    Energy Technology Data Exchange (ETDEWEB)

    Mansuri, Irfan, E-mail: dr.irfan.mansuri@gmail.com [Indore Institute of Science and Technology, Pithampur Road Rau, Indore-453331 India and School of Physics, Devi Ahilya University, Khandwa Road Campus, Indore-452001 (India); Shaikh, M. W. [School of Physics, Devi Ahilya University, Khandwa Road Campus, Indore-452001, India and Acropolis Technical Campus, Village Tillore, Indore-453331 (India); Khan, E.; Varshney, Dinesh [School of Physics, Devi Ahilya University, Khandwa Road Campus, Indore-452001 (India)

    2014-04-24

    The temperature-dependent thermal conductivity of the doped manganites La{sub 0.7}Ca{sub 0.3}MnO{sub 3} is theoretically analyzed within the framework of Kubo formulae. The Hamiltonian consists of phonon, electron and magnon thermal conductivity contribution term. In this process we took defects, carrier, grain boundary, scattering process term and then calculate phonon, electron and magnon thermal conductivity.

  9. Observations of the stratospheric conductivity and its variation at three latitudes

    Science.gov (United States)

    Byrne, G. J.; Benbrook, J. R.; Bering, E. A.; Oro, D.; Seubert, C. O.

    1988-04-01

    Measurements from nine high-altitude balloon flights at altitudes ranging from 10 to 30 km have been obtained in order to study atmospheric conductivity variations on local and global scales. The conductivity profiles are not correlated with solar or cosmic ray activity, but they exhibit variations which appear to be dominated by local effects. Evidence is provided of stratospheric aerosol layers with number densities of the order of 1000/cu cm. It is suggested that global conductivity models employing latitudinal variations based on cosmic ray ionization alone may be improved by including the effects of latitudinal variations of temperature and aerosols.

  10. Morphology in electrochemically grown conducting polymer films

    Science.gov (United States)

    Rubinstein, Israel; Gottesfeld, Shimshon; Sabatani, Eyal

    1992-01-01

    A conducting polymer film with an improved space filling is formed on a metal electrode surface. A self-assembling monolayer is formed directly on the metal surface where the monolayer has a first functional group that binds to the metal surface and a second chemical group that forms a chemical bonding site for molecules forming the conducting polymer. The conducting polymer is then conventioonally deposited by electrochemical deposition. In one example, a conducting film of polyaniline is formed on a gold electrode surface with an intermediate monolayer of p-aminothiophenol.

  11. Electrical conductivity of individual polypyrrole microtube

    Institute of Scientific and Technical Information of China (English)

    Long Yun-Ze; Xiao Hong-Mei; Chen Zhao-Jia; Wan Mei-Xiang; Jin Ai-Zi; Gu Chang-Zhi

    2004-01-01

    Conducting microtubes (0.4-0.5μm in outer diameter) made of polypyrrole (PPy) doped with p-toluene sulfonic acid (PTSA) were synthesized by a self-assembly method. We report the electrical conductivity of an individual PPy microtube, on which a pair of platinum micro-leads was fabricated bv focused ion beam deposition. The measured room-temperature conductivity of the individual PPy microtube was 0.29S/cm, which is comparable to that of templatesynthesized PPy micro/nanotubes. The temperature dependence of conductivity of the individual microtube follows the three-dimensional variable-range hopping (3D VRH) model.

  12. Conduction velocity of antigravity muscle action potentials.

    Science.gov (United States)

    Christova, L; Kosarov, D; Christova, P

    1992-01-01

    The conduction velocity of the impulses along the muscle fibers is one of the parameters of the extraterritorial potentials of the motor units allowing for the evaluation of the functional state of the muscles. There are no data about the conduction velocities of antigravity muscleaction potentials. In this paper we offer a method for measuring conduction velocity of potentials of single MUs and the averaged potentials of the interference electromiogram (IEMG) lead-off by surface electrodes from mm. sternocleidomastoideus, trapezius, deltoideus (caput laterale) and vastus medialis. The measured mean values of the conduction velocity of antigravity muscles potentials can be used for testing the functional state of the muscles.

  13. Thermal conductivity of different colored compomers.

    Science.gov (United States)

    Guler, Cigdem; Keles, Ali; Guler, Mehmet S; Karagoz, Sendogan; Cora, Ömer N; Keskin, Gul

    2017-06-15

    Compomers are mostly used in primary dentition. The thermal conductivity properties of traditional or colored compomers have not been investigated in detail so far. The aim of this in vitro study was to assess and compare the thermal conductivities of traditional and colored compomers. Two sets of compomers - namely, Twinky Star (available in berry, lemon, green, silver, blue, pink, gold and orange shades) and Dyract Extra (available in B1, A3 and A2 shades) - were included in this study. All of the traditional and colored compomers were applied to standard molds and polymerized according to the manufacturers' instructions. Three samples were prepared from each compomer. Measurements were conducted using a heat conduction test setup, and the coefficient of heat conductivity was calculated for each material. The heat conductivity coefficients were statistically analyzed using Kruskal-Wallis and Duncan tests. Uncertainty analysis was also performed on the calculated coefficients of heat conductivity. Statistically significant differences were found (p<0.05) between the thermal conductivity properties of the traditional and colored compomers examined. Among all of the tested compomers, the silver shade compomer exhibited the highest coefficient of heat conductivity (p<0.05), while the berry shade exhibited the lowest coefficient (p<0.05). Uncertainty analyses revealed that 6 out of 11 samples showed significant differences. The silver shade compomer should be avoided in deep cavities. The material properties could be improved for colored compomers.

  14. Dynamic conductance of a ballistic quantum wire

    Energy Technology Data Exchange (ETDEWEB)

    Quan Jun [School of Physics Science and Technology, Zhanjiang Normal University, Zhanjiang 524048 (China); Tian Ying [Center of Liberal Education, Zhanjiang Normal University, Zhanjiang 524048 (China); Zhang, Jun, E-mail: ntu_submit@yahoo.c [School of Physics Science and Technology, Zhanjiang Normal University, Zhanjiang 524048 (China); Shenzhen Institute of Advanced Integration Technology, Shenzhen 518055 (China); Shao Lexi [School of Physics Science and Technology, Zhanjiang Normal University, Zhanjiang 524048 (China)

    2011-04-01

    Within the framework of exact linear response theory, we derive a general formula, with which the dynamic conductance of mesoscopic system can be determined in the absence of Coulomb interaction. In addition, we present a solution to the problem of current partition in the system. These allow the derivation of dynamic conductance in time-dependent case. As a natural consequence, the current (charge) conservation and gauge invariance conditions are fulfilled. To give an example, we discuss the dynamic conductance of a ballistic quantum wire, and the effect of contacts on the conductance is also discussed.

  15. Hypertensive crisis: clinical-epidemiological profile.

    Science.gov (United States)

    Vilela-Martin, José Fernando; Vaz-de-Melo, Renan Oliveira; Kuniyoshi, Cristina Hiromi; Abdo, André Neder Ramires; Yugar-Toledo, Juan Carlos

    2011-03-01

    Hypertensive crisis (HC) stands out as one type of acute elevation in blood pressure (BP) and can manifest as hypertensive emergency (HE-with target-organ damage (TOD)) or hypertensive urgency (HU-without TOD), usually accompanied by levels of diastolic BP ≥120 mmHg. The aim of this study was to characterize the clinical-epidemiological profile of HC over the course of 1 year in a university reference hospital and perform a review of the literature. The study was a cross-sectional study, conducted over a period of 1 year (2006) in 362 patients who presented for treatment at the emergency hospital with HC, as described above. Among all patients examined, 231 individuals met the criteria for HE and 131 met the criteria for HU. Patients with HE were older (Phypertension.

  16. Glycosylation profiles of therapeutic antibody pharmaceuticals.

    Science.gov (United States)

    Wacker, Christoph; Berger, Christoph N; Girard, Philippe; Meier, Roger

    2011-11-01

    Recombinant antibodies specific for human targets are often used as therapeutics and represent a major class of drug products. Their therapeutic efficacy depends on the formation of antibody complexes resulting in the elimination of a target molecule or the modulation of specific signalling pathways. The physiological effects of antibody therapeutics are known to depend on the structural characteristics of the antibody molecule, specifically on the glycosylation which is the result of posttranslational modifications. Hence, production of therapeutic antibodies with a defined and consistent glycoform profile is needed which still remains a considerable challenge to the biopharmaceutical industry. To provide an insight into the industries capability to control their manufacturing process and to provide antibodies of highest quality, we conducted a market surveillance study and compared major oligosaccharide profiles of a number of monoclonal antibody pharmaceuticals sampled on the Swiss market. Product lot-to-lot variability was found to be generally low, suggesting that a majority of manufacturers have implemented high quality standards in their production processes. However, proportions of G0, G1 and G2 core-fucosylated chains derived from different products varied considerably and showed a bias towards the immature agalactosidated G0 form. Interestingly, differences in glycosylation caused by the production cell type seem to be of less importance compared with process related parameters such as cell growth.

  17. Preclinical toxicity profile of oral bilastine.

    Science.gov (United States)

    Lucero, María Luisa; Arteche, Joseba K; Sommer, E W; Casadesus, Agustín

    2012-06-01

    As part of the bilastine development program, and as mandated by regulatory authorities, several studies were performed with oral bilastine in different animal species to evaluate its toxicity profile. Toxicokinetic analyses conducted in tandem to evaluate systemic exposure, gender differences, and dose proportionality in the different animal species indicated that animals were systemically exposed to bilastine during treatment. Repeated-dose toxicity studies in beagle dogs (52 weeks) and in rats and mice (13 weeks) showed that bilastine at doses up to 2,000 mg/kg/day was not associated with any mortality, ocular effects, or nodules/masses. Likewise, no bilastine-associated neoplastic lesions were observed in rats and mice after 104 weeks of treatment with bilastine at doses up to 2,000 mg/kg/day. In general, bilastine-related clinical signs, body-weight changes, food consumption, clinical chemistry, haematology, and macro- and microscopic findings were of low order and reversible, with effects present only at the highest doses administered. Bilastine (up to 1,000 mg/kg/day) was well tolerated in pregnant/lactating rats and in their offspring and subsequent generations. With respect to effects on embryofoetal development in rabbits, bilastine at 400 mg/kg/day (the highest dose evaluated) was assessed to be the no observed adverse effects level. Overall, bilastine demonstrated a favorable toxicity profile in all animal models investigated and at higher doses than the corresponding recommended daily human dosage.

  18. Anthropometric profile of elite Chilean Paralympic athletes

    Directory of Open Access Journals (Sweden)

    Samuel Durán-Agüero

    2016-12-01

    Full Text Available Introduction: Sport is one of the most popular social events worldwide. It becomes interesting to characterize its practitioners, even more in some poorly studied groups such as Paralympic athletes. The main objective of this study is to determine the anthropometric profile of Chilean Elite Paralympic Athletes (CEPA through body composition and somatotype. Material and Methods: A cross-sectional study was conducted with 41 subjects (93% of the classified to the Para-Panamerican Games Toronto 2015, who practiced table tennis (n=6, football 5 (n=11, swimming (n=8, rugby (n=7, powerlifting (n=6 and wheelchair tennis (n=3. The body composition and somatotype were assessed through the protocol described by the International Society for the Advancement of Kinanthropometry (ISAK. Results: The CEPA reach an average for that classifies somatotype mostly as meso-endomorphic (5.3 - 7.8 - 0.5, a BMI of 27.4 kg/m2, and body composition for fat mass reaches 29.8% in women and 25.7% in men, while muscle mass gain 42.6% (women and 44.5% (men. Conclusions: The CEPA have a somatotype profile that classifies mostly as meso-endomorphic, body composition has a predominance muscle mass and high fat mass, although is similar to other Paralympics athletes.

  19. Ozone profiles above Palmer Station, Antarctica

    Science.gov (United States)

    Torres, Arnold L.; Brothers, George

    1988-01-01

    NASA's Goddard Space Flight Center/Wallops Flight Facility conducted a series of 52 balloon-borne measurements of vertical ozone profiles over the National Science Foundation (NSF) research facility at Palmer Station, Antarctica (64 deg 46 S, 64 deg 3 W) between August 9 and October 24, 1987. High resolution measurements were made from ground level to an average of 10 mb. While much variation was seen in the profile amounts of ozone, it is clear that a progressive depletion of ozone occurred during the measurement period, with maximum depletion taking place in the 17 to 19 km altitude region. Ozone partial pressures dropped by about 95 percent in this region. Shown here are plotted time dependences of ozone amounts observed at 17 km and at arbitrarily selected altitudes below (13 km) and above (24 km) the region of maximum depletion. Ozone partial pressure at 17 km is about 150nb in early August, and has decreased to less than 10nb in the minimums in October. The loss rate is of the order of 1.5 percent/day. In summary, a progressive depletion in stratospheric ozone over Palmer Station was observed from August to October, 1987. Maximum depletion occurred in the 17 to 19 km range, and amounted to 95 percent. Total ozone overburden decreased by up to 50 percent during the same period.

  20. [Demographic profile of Venezuela].

    Science.gov (United States)

    Quintero, I

    1984-04-01

    Sources of demographic data for Venezuela include 11 population censuses conducted between 1873-1981, birth and death registration statistics, and the household sample survey. The average annual rate of population growth increase from 2.8% between 1920-40 to 3-4% thereafter. The population at the 1961 census was 7.52 million. According to preliminary data from the 1981 census, the population of 14.57 million is growing at an annual rate of 2.8%. 41.2% of the population is under 15 years old, implying a huge demand for educational and health services, housing and employment. The dependency rate in 1980 was 81.3% for the country as a whole, 100.4% in rural areas, and 76.0% in urban areas. The young age structure means that the population will continue to grow even if natality rates decline. The crude natality rate was estimated at 47.3/1000 for 1950-55, 36.0 for 1970-75, and 32.9 for 1980-85. Some rural areas still have natality rates of over 47/1000. The total fertility rate declined from 6.5 in 1950-55 to 4.1 in 1980-85. The decline in the natality rate reflects improving quality of life, availability of family planning services, urbanization, and access of women to productive activities and educational centers. The mortality rate was 12.3/1000 in 1950-55, 9.1 in 1960-65, in 1970-75, and has been estimated at 5.5 for 1980-85. Some rural areas have mortality rates of 8.1. The infant mortality rate was 50.2/1000 in 1971 and 34.3 in 1980. Life expectancy at birth is about 69 years. During the 1920s, Venezuela unerwent expansion in infrastructure and technological utilization, generating rapid urbanization. 39.2% of the population was urban in 1941, compared to 78.8% in 1980. The significance of urbanization in Venezuela is due to the rapidity as well as the diffusion of the process. The household sample survey for the 2nd half of 1980 indicated a total of 8.16 million employed and an activity rate of 32.1% overall, 46.4% for males and 17.7% for females. The