WorldWideScience

Sample records for hcpb breeder blanket

  1. In-pile testing of HCPB submodules. Feasibility study for the European Blanket project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Van der Laan, J.G.; Bakker, K.; Fokkens, J.H.; Haverkate, B.R.W.; Sciolla, C.M. [ECN Nuclear Research, Petten (Netherlands); Conrad, R. [JRC-IAM, HFR-Unit, Petten (Netherlands)

    1998-02-01

    Full size module systems of the candidate DEMO blanket concepts selected for the European Blanket Project (EBP) will be tested in ITER, presently called Test Blanket modules (TBM). The Helium Cooled Pebble Bed (HCPB) is one of the two concepts developed in the European Union (EU). This development path consists of several scaling steps, including integral testing of a subsized module at realistic operation conditions. As part of the HCPB development work for the TBMs, ECN performed jointly with JRC/IAM at Petten a feasibility study for irradiation tests of subsized HCPB modules. The first stage of the study was concluded with a report on the conceptual design of an in-pile test of a single submodule with a helium cooling loop. Such test was considered technically feasible, but would require significant project duration and expenditures. Further development of detailed objectives for in-pile tests was recommended, in particular in view of the different parameters for the HCPB-ITM and DEMO-concept. This objective has been modified by the EBP in fall 1997. For the final stage of the study the test objective has been: the in-pile testing of the thermal/mechanical behaviour of the HCPB ceramic breeder beds, while giving lower priority to tritium transport issues (release, permeation). Several configuration options in the High Flux Reactor (HFR) in Petten, Netherlands, to perform in-pile test of HCPB submodules have been considered. Neutronics analyses along with thermal and structural analyses have been made for selected options and several HFR peripheral in-tank positions. These pre-design analyses show that the whole range of breeder bed power densities and temperature levels, which are relevant to the HCPB DEMO and BTM designs, can be reached with the options presented. The options are all cooled by the reactor coolant flow. The use of an helium loop is not compulsory and is considered as an unnecessary complication with regard to the present test objectives

  2. Analytical study with the Athena code of the HCPB blanket design experimental activity on the HE-FUS3 facility

    Energy Technology Data Exchange (ETDEWEB)

    Meloni, P. [ENEA, Bologna (Italy); D' Auria, F.; Oriolo, F. [Pisa Univ. (Italy). Dipt. di Costruzioni Meccaniche e Nucleari; Dell' Orco, G.; Polazzi, G. [ENEA, Brasimone (Italy)

    1998-07-01

    Within the frame of the European Fusion Technology Programme, the HE-FUS3 helium facility was selected for the execution of thermal-hydraulic experimental campaigns on the HCPB Blanket mock-ups. The studies for the DEMO HCPB Blanket design, for the 1997-1998, contemplates a task concerning the Out-of-Pile tests for the HCPB Test Blanket Module (TBM). One of the main objectives of the task is the qualification of the HE-FUS3 capability to perform tests both in normal and off-normal conditions. (authors)

  3. Transient analyses on the cooling channels of the DEMO HCPB blanket concept under accidental conditions

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Yuming, E-mail: Yuming.chen@kit.edu; Ghidersa, Bradut-Eugen; Jin, Xue Zhou

    2016-11-01

    Highlights: • This paper presents transient CFD analyses on the cooling channels of the DEMO HCPB FW for accidental scenarios LOCA and LOFA. • In both LOCA & LOFA, the wall temperature increases quickly to an unacceptable level within seconds. • If the coolant flow rate is maintained at a half of nominal value in case of LOFA (partial LOFA), the wall temperature rises much slower, but will still leads to a damage of structure within minutes. • The simulated heat transfer coefficients were compared with empirical correlations. - Abstract: Helium Cooled Pebble Bed (HCPB) blanket concept is one of the DEMO (Demonstration Power Plant) blanket concepts running for the final DEMO design selection. In this paper, transient analyses on the cooling channels of the FW are carried out by means of CFD simulations for the selected accidental scenarios loss-of-coolant-accident (LOCA) and loss-of-flow-accident (LOFA). ANSYS-CFX is used for the simulations. The simulation results help to understand how fast the temperature of the FW can increase and what is the time window that is available until the temperature of the structural material reaches the design limit in order to be able to define a suitable protection strategy for the system. In view of later developments of the models, the heat transfer coefficients calculated with CFD are compared with the values predicted by two widely used correlations for turbulent pipe flows.

  4. Activity inventories and decay heat calculations for a DEMO with HCPB and HCLL blanket modules

    Energy Technology Data Exchange (ETDEWEB)

    Stankunas, Gediminas, E-mail: gediminas.stankunas@lei.lt [Lithuanian Energy Institute, Laboratory of Nuclear Installation Safety, Breslaujos Str. 3, LT-44403 Kaunas (Lithuania); Tidikas, Andrius [Lithuanian Energy Institute, Laboratory of Nuclear Installation Safety, Breslaujos Str. 3, LT-44403 Kaunas (Lithuania); Pereslavstev, Pavel [Karlsruhe Institute of Technology, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Catalán, Juan; García, Raquel; Ogando, Francisco [Departamento de Ingeniería Energética, UNED, 28040 Madrid (Spain); Fischer, Ulrich [Karlsruhe Institute of Technology, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2016-11-01

    Highlights: • The afterheat and activity inventories were calculated for Eurofer steel which is the reference structural material for DEMO. • The decay heat for the HCPB DEMO was found to be larger than for the HCLL both for short and longer cooling times. • The comparison calculations were performed for a single outboard blanket module of the HCLL DEMO assuming High-Temperature Ferritic–Martensitic (HT-FM) steel and SS-316 (LN) as structural material. - Abstract: Activation inventories, decay heat and radiation doses are important nuclear quantities which need to be assessed on a reliable basis for the safe operation of a fusion nuclear power reactor. The afterheat and activity inventories were shown to be dominated by the Eurofer steel which is the reference structural material for DEMO. The decay heat for the HCPB DEMO was found to be larger than for the HCLL both for short (a few days) and longer (more than a year) cooling times. As for the alternative steels, the induced radioactivity was turned out to be lowest for the SS-316 until about 200 years after shut-down. Afterwards, the activity level of SS-316 steel was found to be the highest. For these times, the activity of both Eurofer and the HT-FM steel is about one order of magnitude lower.

  5. Nuclear maintenance strategy and first steps for preliminary maintenance plan of the EU HCLL & HCPB Test Blanket Systems

    Energy Technology Data Exchange (ETDEWEB)

    Galabert, Jose, E-mail: jose.galabert@f4e.europa.eu [F4E Fusion for Energy, EU Domestic Agency, c/Josep Pla, 2. B3, 08019, Barcelona (Spain); Hopper, Dave [AMEC Foster Wheeler, Faraday Street, Birchwood Park, WA3 6GN (United Kingdom); Neviere, Jean-Cristophe [ITER Organization, Route de Vinon-sur-Verdon, CS 90046, 13067, St. Paul Lez Durance Cedex (France); Nodwell, David [CCFE, Culham Science Centre, Abingdon, OX14 3DB, Oxfordshire (United Kingdom); Pascal, Romain [ITER Organization, Route de Vinon-sur-Verdon, CS 90046, 13067, St. Paul Lez Durance Cedex (France); Poitevin, Yves; Ricapito, Italo [F4E Fusion for Energy, EU Domestic Agency, c/Josep Pla, 2. B3, 08019, Barcelona (Spain); White, Gareth [AMEC Foster Wheeler, Faraday Street, Birchwood Park, WA3 6GN (United Kingdom)

    2017-03-15

    Highlights: • Nuclear maintenance strategy for the two European (EU) Test Blanket Systems (TBS): i/. Helium Cooled Lead Lithium (HCLL) and ii/. Helium Cooled Pebble Bed (HCPB). • Preliminary identification of maintenance tasks for most relevant components of the EU HCLL & HCPB TBS. • Preliminary feasibility analysis for hands-on maintenance tasks of some relevant components of the European Test Blanket Systems. • Design recommendations for enhancement of the European Test Blanket Systems maintainability. - Abstract: This paper gives an overview of nuclear maintenance strategy to be followed for the European HCLL & HCPB Test Blanket Systems (TBS) to be installed in ITER. One of the several core documents to prepare in view of their licensing is their respective ‘Maintenance Plan’. This document is fundamental for ensuring sound performance and safety of the TBS during ITER’s operational phase and shall include, amongst others, relevant information on: maintenance organization, preventive and corrective maintenance task procedures, condition monitoring for key components, maintenance work planning, and a spare parts plan, just to mention some of the key topics. In compliance with the ITER Plant Maintenance policy, first steps have been taken aimed at defining nuclear maintenance strategy for some of the most relevant HCLL & HCPB TBS components, conducted by F4E in collaboration with industry. After a brief recall of maintenance strategy of the TBM Program (PBS-56), this paper analyses main features of EU HCLL & HCPB TBS maintainability and identifies, at their conceptual design phase, a preliminary list of maintenance tasks to be developed for their most representative components. In addition, the paper also presents the first nuclear maintenance studies conducted for replacement of the Q{sub 2} Getter Beds, identifying some design recommendations for their sound maintainability.

  6. Thermal control of solid breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Raffray, A.R.; Ying, A.; Gorbis, Z.; Tillack, M.S.; Abdou, M.A.

    1991-12-31

    An assessment of the thermal control mechanisms applicable to solid breeder blanket designs under ITER-like operating conditions is presented in this paper. Four cases are considered: a helium gap; a sintered block Be region; a sintered block helium region with a metallic felt at the Be/clad interface; and a Be packed bed region. For these cases, typical operating are explored to determine the ranges of wall load which can be accommodated while maintaining the breeder within its allowable operating temperature window. The corresponding region thicknesses are calculated to help identify practicality and design tolerances.

  7. Thermal control of solid breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Raffray, A.R.; Ying, A.; Gorbis, Z.; Tillack, M.S.; Abdou, M.A.

    1991-01-01

    An assessment of the thermal control mechanisms applicable to solid breeder blanket designs under ITER-like operating conditions is presented in this paper. Four cases are considered: a helium gap; a sintered block Be region; a sintered block helium region with a metallic felt at the Be/clad interface; and a Be packed bed region. For these cases, typical operating are explored to determine the ranges of wall load which can be accommodated while maintaining the breeder within its allowable operating temperature window. The corresponding region thicknesses are calculated to help identify practicality and design tolerances.

  8. ITER solid breeder blanket materials database

    Energy Technology Data Exchange (ETDEWEB)

    Billone, M.C. [Argonne National Lab., IL (United States); Dienst, W. [Kernforschungszentrum Karlsruhe GmbH (Germany). Inst. fuer Material- und Festkoerperforschung; Flament, T. [CEA Centre d`Etudes de Fontenay-aux-Roses (France). Commissariat A L`Energie Atomique; Lorenzetto, P. [NET Team, Garching (Germany); Noda, K. [Japan Atomic Energy Research Inst., Takai, Ibaraki, (Japan); Roux, N. [CEA Centre d`Etudes et de Recherches Les Materiaux (France). Commissariat a L`Energie Atomique

    1993-11-01

    The databases for solid breeder ceramics (Li{sub 2},O, Li{sub 4}SiO{sub 4}, Li{sub 2}ZrO{sub 3} and LiAlO{sub 2}) and beryllium multiplier material are critically reviewed and evaluated. Emphasis is placed on physical, thermal, mechanical, chemical stability/compatibility, tritium, and radiation stability properties which are needed to assess the performance of these materials in a fusion reactor environment. Correlations are selected for design analysis and compared to the database. Areas for future research and development in blanket materials technology are highlighted and prioritized.

  9. Methodology for accident analyses of fusion breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Dobromir Panayotov; Andrew Grief; Brad J. Merrill; Julian T. Murgatroyd; Paul Humrickhouse; Yves Poitevin; Simon Owen; Markus Iseli

    2015-06-01

    'Fusion for Energy' (F4E) develops designs and implements the European Test Blanket Systems (TBS) in ITER - Helium-Cooled Lithium-Lead (HCLL) and Helium-Cooled Pebble-Bed (HCPB). Safety demonstration is an essential element for the integration of TBS in ITER and accident analyses are one of its critical segments. A systematic approach to the accident analyses had been acquired under the F4E contract on TBS safety analyses. F4E technical requirements and AMEC and INL efforts resulted in the development of a comprehensive methodology for fusion breeding blanket accident analyses. It addresses the specificity of the breeding blankets design, materials and phenomena and at the same time is consistent with the one already applied to ITER accident analyses. Methodology consists of several phases. At first the reference scenarios are selected on the base of FMEA studies. In the second place elaboration of the accident analyses specifications we use phenomena identification and ranking tables to identify the requirements to be met by the code(s) and TBS models. Thus the limitations of the codes are identified and possible solutions to be built into the models are proposed. These include among others the loose coupling of different codes or code versions in order to simulate multi-fluid flows and phenomena. The code selection and issue of the accident analyses specifications conclude this second step. Furthermore the breeding blanket and ancillary systems models are built on. In this work challenges met and solutions used in the development of both MELCOR and RELAP5 codes models of HCLL and HCPB TBSs will be shared. To continue the developed models are qualified by comparison with finite elements analyses, by code to code comparison and sensitivity studies. Finally, the qualified models are used for the execution of the accident analyses of specific scenario. When possible the methodology phases will be illustrated in the paper by limited number of tables and

  10. Methodology for accident analyses of fusion breeder blankets and its application to helium-cooled pebble bed blanket

    Energy Technology Data Exchange (ETDEWEB)

    Panayotov, Dobromir, E-mail: dobromir.panayotov@f4e.europa.eu [Fusion for Energy (F4E), Josep Pla, 2, Torres Diagonal Litoral B3, Barcelona E-08019 (Spain); Grief, Andrew [Amec Foster Wheeler, Booths Park, Chelford Road, Knutsford WA16 8QZ, Cheshire (United Kingdom); Merrill, Brad J.; Humrickhouse, Paul [Idaho National Laboratory, PO Box 1625, Idaho Falls, ID (United States); Trow, Martin; Dillistone, Michael; Murgatroyd, Julian T.; Owen, Simon [Amec Foster Wheeler, Booths Park, Chelford Road, Knutsford WA16 8QZ, Cheshire (United Kingdom); Poitevin, Yves [Fusion for Energy (F4E), Josep Pla, 2, Torres Diagonal Litoral B3, Barcelona E-08019 (Spain); Peers, Karen; Lyons, Alex; Heaton, Adam; Scott, Richard [Amec Foster Wheeler, Booths Park, Chelford Road, Knutsford WA16 8QZ, Cheshire (United Kingdom)

    2016-11-01

    Graphical abstract: - Highlights: • Test Blanket Systems (TBS) DEMO breeding blankets (BB) safety demonstration. • Comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials, and phenomena. • Development of accident analysis specifications (AAS) via the use of phenomena identification and ranking tables (PIRT). • PIRT application to identify required physical models for BB accidents analysis, code assessment and selection. • Development of MELCOR and RELAP5 codes TBS models. • Qualification of the models via comparison with finite element calculations, code-tocode comparisons, and sensitivity studies. - Abstract: ‘Fusion for Energy’ (F4E) is designing, developing, and implementing the European Helium-Cooled Lead-Lithium (HCLL) and Helium-Cooled Pebble-Bed (HCPB) Test Blanket Systems (TBSs) for ITER (Nuclear Facility INB-174). Safety demonstration is an essential element for the integration of these TBSs into ITER and accident analysis is one of its critical components. A systematic approach to accident analysis has been developed under the F4E contract on TBS safety analyses. F4E technical requirements, together with Amec Foster Wheeler and INL efforts, have resulted in a comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials, and phenomena while remaining consistent with the approach already applied to ITER accident analyses. The methodology phases are illustrated in the paper by its application to the EU HCPB TBS using both MELCOR and RELAP5 codes.

  11. Development of self-cooled liquid metal breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Malang, S.; Tillack, M.S. [comps.; Barleon, L.; Baumgaertner, S.; Borgstedt, H.U.; Buehler, L.; Buerkle, G.; Dammel, F.; Feuerstein, H.; Fischer, U.; Gabel, K.; Gerhardt, H.; Glasbrenner, H.; Heider, T.; Jordan, T.; Kleefeldt, K.; Kleykamp, H.; Lindau, R.; Moeslang, A.; Norajitra, F.; Reimann, G.; Reimann, J.; Riesch-Oppermann, H.; Ritzhaupt-Kleissl, H.J.; Schleisiek, K.; Schmitz, G.; Schnauder, H.; Stieglitz, R.; Tellini, B.; Tsige-Tamirat, H.

    1995-11-01

    The development of liquid metal breeder blankets for fusion reactors has been performed in the Forschungszentrum Karlsruhe as a part of the European fusion blanket development program with the aim to select the two most promising concepts in 1995 for further development. In this report are described the designs of self-cooled blankets together with the results of the accompanying R and D program of the years 1992-1995. The program includes design studies as well as theoretical and experimental work in the fields of neutronics, magneto-hydrodynamics, thermohydraulics, mechanical stresses, compatibility and purification of lead-lithium, tritium extraction and control, safety, reliability, electrical insulating coatings, and fabrication technologies for blanket segments. (orig.) 250 refs.

  12. Experimental study and analysis of the purge gas pressure drop across the pebble beds for the fusion HCPB blanket

    Energy Technology Data Exchange (ETDEWEB)

    Abou-Sena, Ali, E-mail: ali.abou-sena@kit.edu [Karlsruhe Institute of Technology (KIT), Institute for Neutron Physics and Reactor Technology, Karlsruhe (Germany); Arbeiter, Frederik; Boccaccini, Lorenzo V.; Rey, Jörg; Schlindwein, Georg [Karlsruhe Institute of Technology (KIT), Institute for Neutron Physics and Reactor Technology, Karlsruhe (Germany)

    2013-05-15

    Highlights: ► The pressure drop significantly increases with decreasing the pebbles diameter. ► The pressure drop slightly increases with increasing the packing factor. ► The pressure drop is directly proportional to pebble bed length and inlet pressure. ► Predictions of Ergun equation agree well with the measured values of pressure drop. ► The filters resistance has a small contribution to the total pressure drop. -- Abstract: The lithium ceramic and beryllium pebble beds of the breeder units (BU), in the fusion breeding blanket, are purged by helium to extract the bred tritium. Therefore, the objective of this study is to support the design of the BU purge gas system by studying the effect of pebbles diameter, packing factor, pebble bed length, and flow inlet pressure on the purge gas pressure drop. The pebble bed was formed by packing glass pebbles in a rectangular container (56 mm × 206 mm × 396 mm) and was integrated into a gas loop to be purged by helium at BU-relevant pressures (1.1–3.8 bar). To determine the pressure drop across the pebble bed, the static pressure was measured at four locations along the pebble bed as well as at the inlet and outlet locations. The results show: (i) the pressure drop significantly increases with decreasing the pebbles diameter and slightly increases with increasing the packing factor, (ii) for a constant inlet flow velocity, the pressure drop is directly proportional to the pebble bed length and inlet pressure, and (iii) predictions of Ergun's equation agree well with the experimental values of the pressure drop.

  13. Electrical behaviour of ceramic breeder blankets in pebble form after γ-radiation

    Directory of Open Access Journals (Sweden)

    E. Carella

    2015-07-01

    Full Text Available Lithium orthosilicate (Li4SiO4 ceramics in from of pebble bed is the European candidate for ITER testing HCPB (Helium Cooled Pebble Bed breeding modules. The breeder function and the shielding role of this material, represent the areas upon which attention is focused. Electrical measurements are proposed for monitoring the modification created by ionizing radiation and at the same time provide information on lithium movement in this ceramic structure. The electrical tests are performed on pebbles fabricated by Spray-dryer method before and after gamma-irradiation through a 60Co source to a fluence of 4.8 Gy/s till a total dose of 5 ∗ 105 Gy. The introduction of thermal annealing treatments during the electrical impedance spectroscopy (EIS measurements points out the recombination effect of the temperature on the γ-induced defects.

  14. Status of EC solid breeder blanket designs and R and D for demo fusion reactors

    Energy Technology Data Exchange (ETDEWEB)

    Proust, E. [CEA Centre d`Etudes de Saclay, 91 - Gif-sur-Yvette (France). Dept. de Mecanique et de Technologie; Dalle Donne, M. [Kernforschungszentrum Karlsruhe GmbH (Germany); Anzidei, L. [ENEA, Frascati (Italy). Centro Ricerche Energia; Kwast, H. [Netherlands Energy Research Foundation (ECN), Petten (Netherlands); Moons, F. [Centre d`Etude de l`Energie Nucleaire, Mol (Belgium)

    1994-12-31

    Within the European Community Fusion Technology Program two solid breeder blankets for a DEMO reactor are being developed. The two blankets have various features in common: helium as coolant and as tritium purge gas, the martensitic steel MANET as structural material and beryllium as neutron multiplier. The configurations of the two blankets are however different: in the B.I.T. (Breeder Inside Tube) concept the breeder materials are LiAlO{sub 2} or Li{sub 2}ZrO{sub 3} in the form of annular pellets contained in tubes surrounded by beryllium blocks, the coolant helium being outside the tubes, whereas in the B.O.T. (Breeder out of Tube) the breeder and multiplier material are Li{sub 4}SiO{sub 4} and beryllium pebbles forming a mixed bed placed outside the tubes containing the coolant helium. The main critical issues for both blankets are the behavior of the breeder ceramics and of beryllium under irradiation and the tritium control. Other issues are the low temperature irradiation induced embrittlement of MANET, the mechanical effects caused by major plasma disruptions, and safety and reliability. The R and D work concentrate on these issues. The development of martensitic steels including MANET is part of a separate program. Breeder ceramics and beryllium irradiations have been so far performed for conditions which do not cover the peak values injected in the DEMO blankets. Further irradiations in thermal reactors and in fast reactors, especially for beryllium, are required. An effective tritium control requires the development of permeation barriers and/or of methods of oxidation of the tritium in the main helium cooling systems. First promising results have been obtained also in field of mechanical effects from plasma disruptions and safety and reliability, however further work is required in the reliability field and to validate the codes for the calculations of the plasma disruption effects. (authors). 8 figs., 2 tabs., 53 refs.

  15. Neutronic performance issues of the breeding blanket options for the European DEMO fusion power plant

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, U., E-mail: ulrich.fischer@kit.edu [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Bachmann, C. [EUROfusion—Programme Management Unit, Boltzmannstr. 2, 85748 Garching (Germany); Jaboulay, J.-C. [CEA-Saclay, DEN, DM2S, SERMA, LPEC, 91191 Gif-sur-Yvette (France); Moro, F. [ENEA, Dipartimento Fusione e tecnologie per la Sicurezza Nucleare, Via E. Fermi 45, 00044 Frascati, Rome (Italy); Palermo, I. [Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT), Madrid (Spain); Pereslavtsev, P. [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Villari, R. [ENEA, Dipartimento Fusione e tecnologie per la Sicurezza Nucleare, Via E. Fermi 45, 00044 Frascati, Rome (Italy)

    2016-11-01

    Highlights: • Breeder blanket concepts for DEMO—design features. • Neutronic characteristics of breeder blankets. • Evaluation of Tritium breeding potential. • Evaluation of shielding performance. - Abstract: This paper presents nuclear performance issues of the HCPB, HCLL, DCLL and WCLL breeder blankets, which are under development within the PPPT (Power Plant Physics and Technology) programme of EUROfusion, with the objective to assess the potential and suitability of the blankets for the application to DEMO. The assessment is based on the initial design versions of the blankets developed in 2014. The Tritium breeding potential is considered sufficient for all breeder blankets although the initial design versions of the HCPB, HCLL and DCLL blankets were shown to require further design improvements. Suitable measures have been proposed and proven to be sufficient to achieve the required Tritium Breeding Ratio (TBR) ≥ 1.10. The shielding performance was shown to be sufficient to protect the super-conducting toroidal field coil provided that efficient shielding material mixtures including WC or borated water are utilized. The WCLL blanket does not require the use of such shielding materials due to a very compact blanket support structure/manifold configuration which yet requires design verification. The vacuum vessel can be safely operated over the full anticipated DEMO lifetime of 6 full power years for all blanket concepts considered.

  16. Updated neutronics analyses of a water cooled ceramic breeder blanket for the CFETR

    Science.gov (United States)

    Xiaokang, ZHANG; Songlin, LIU; Xia, LI; Qingjun, ZHU; Jia, LI

    2017-11-01

    The water cooled ceramic breeder (WCCB) blanket employing pressurized water as a coolant is one of the breeding blanket candidates for the China Fusion Engineering Test Reactor (CFETR). Some updating of neutronics analyses was needed, because there were changes in the neutronics performance of the blanket as several significant modifications and improvements have been adopted for the WCCB blanket, including the optimization of radial build-up and customized structure for each blanket module. A 22.5 degree toroidal symmetrical torus sector 3D neutronics model containing the updated design of the WCCB blanket modules was developed for the neutronics analyses. The tritium breeding capability, nuclear heating power, radiation damage, and decay heat were calculated by the MCNP and FISPACT code. The results show that the packing factor and 6Li enrichment of the breeder should both be no less than 0.8 to ensure tritium self-sufficiency. The nuclear heating power of the blanket under 200 MW fusion power reaches 201.23 MW. The displacement per atom per full power year (FPY) of the plasma-facing component and first wall reach 0.90 and 2.60, respectively. The peak H production rate reaches 150.79 appm/FPY and the peak He production reaches 29.09 appm/FPY in blanket module #3. The total decay heat of the blanket modules is 2.64 MW at 1 s after shutdown and the average decay heat density can reach 11.09 kW m-3 at that time. The decay heat density of the blanket modules slowly decreases to lower than 10 W m-3 in more than ten years.

  17. Proceedings of the sixth international workshop on ceramic breeder blanket interactions

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Kenji [ed.

    1998-03-01

    This report is the Proceedings of `the Sixth International Workshop on Ceramic Breeder Blanket Interactions` which was held as a workshop on ceramic breeders under Annex II of IEA Implementing Agreement on a Programme of Research and Development on Fusion Materials, and Japan-US Workshop 97FT4-01. This workshop was held in Mito city, Japan on October 22-24, 1997. About forty experts from EU, Japan, USA, and Chile attended the workshop. The scope of the workshop included the following: (1) fabrication and characterization of ceramic breeders, (2) properties data for ceramic breeders, (3) tritium release characteristics, (4) modeling of tritium behavior, (5) irradiation effects on performance behavior, (6) blanket design and R and D requirements, (7) hydrogen behavior in materials, and (8) blanket system technology and structural materials. In the workshop, information exchange was performed for fabrication technology of ceramic breeder pebbles in EU and Japan, data of various properties of Li{sub 2}TiO{sub 3}, tritium release behavior of Li{sub 2}TiO{sub 3} and Li{sub 2}ZrO{sub 3} including tritium diffusion, modeling of tritium release from Li{sub 2}ZrO{sub 3} in ITER condition, helium release behavior from Li{sub 2}O, results of tritium release irradiation tests of Li{sub 4}SiO{sub 4} pebbles in EXOTIC-7, R and D issues for ceramic breeders for ITER and DEMO blankets, etc. The 23 of the papers are indexed individually. (J.P.N.)

  18. Preliminary neutronics design and analysis of helium cooled solid breeder blanket for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Lv, Zhongliang; Chen, Hongli, E-mail: hlchen1@ustc.edu.cn; Chen, Chong; Li, Min; Zhou, Guangming

    2015-06-15

    Highlights: • Neutronics design of a helium cooled solid breeder blanket for CFETR was presented. • The breeding zones parallel to FW and perpendicular to FW were optimized. • A series of neutronics analyses for the proposed blanket were shown. - Abstract: Chinese Fusion Engineering Test Reactor (CFETR) is a test tokamak reactor being designed in China to bridge the gap between ITER and future fusion power plant. Tritium self-sufficiency is one of the most important issues for CFETR and the tritium breeding ratio (TBR) is recommended not less than 1.2. As one of the candidates, a helium cooled solid breeder blanket for CFETR superconducting tokamak option was proposed. In the concept, radial arranged U-shaped breeding zones are adopted for higher TBR and simpler structure. In this work, three-dimensional neutronics design and analysis of the blanket were performed using the Monte Carlo N-Particle transport code MCNP with IAEA data library FENDL-2.1. Tritium breeding capability of the proposed blanket was assessed and the breeding zones parallel to first wall (FW) and perpendicular to FW were optimized. Meanwhile, the nuclear heating analysis and shielding performance were also presented for later thermal and structural analysis. The results showed that the blanket could well meet the tritium self-sufficiency target and the neutron shield could satisfy the design requirements.

  19. Conceptual design of solid breeder blanket system cooled by supercritical water

    Energy Technology Data Exchange (ETDEWEB)

    Enoeda, Mikio; Akiba, Masato [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Ohara, Yoshihiro [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment] [and others

    2001-12-01

    This report is a summary of the design works, which was discussed in the design workshop held in 2000 for the demonstration (DEMO) blanket aimed to strengthen the commercial competitiveness and technical feasibility simultaneously. The discussion of the Fusion Council in 1999 updated the assessment of the mission of DEMO blanket. Updated mission of the DEMO blanket is to be the prototype of the commercially competitive power plant. The DEMO blanket must supply the feasibility and experience of the total design of the power plant and the materials. From such standing point, the conceptual design study was performed to determine the updated strategy and goal of the R and D of the DEMO blanket which applies the supercritical water cooling proposed in A-SSTR, taking into account the recent progress of the plasma research and reactor engineering technology. The DEMO blanket applies the solid breeder materials and supercritical water cooling. The product tritium is purged out by helium gas stream in the breeder region. In the breeder region, the pebble bed concept was applied to withstand instable cracking of the breeder and multiplier materials in high neutron irradiation and high temperature operation. Inlet temperature of the coolant is planned to be 280degC and final outlet temperature is 510degC to obtain high energy conversion efficiency up to 43%. Reduced activation ferritic steel, F82H and ODS ferritic steel were selected as the structural material. Lithium ceramics, Li{sub 2}TiO{sub 3} or Li{sub 2}O were selected as the breeder materials. Beryllium or its inter-metallic compound Be12Ti was selected as the neutron multiplier materials. Basic module structure was selected as the box type structure which enables the remote handling replacement of the module from in-vessel access. Dimension of the box is limited to 2 m x 2 m, or smaller, due to the dimension of the replacement port. In the supercritical water cooling, the high coolant temperature is the merit for

  20. Neutronic analyses of design issues affecting the tritium breeding performance in different DEMO blanket concepts

    Energy Technology Data Exchange (ETDEWEB)

    Pereslavtsev, Pavel, E-mail: pavel.pereslavtsev@kit.edu [Karlsruhe Institute for Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Bachmann, Christian [EUROfusion – Programme Management Unit, Boltzmannstrasse 2, 85748 Garching (Germany); Fischer, Ulrich [Karlsruhe Institute for Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2016-11-01

    Highlights: • Realistic 3D MCNP model based on the CAD engineering model of DEMO. • Automated procedure for the generation and arrangement of the blanket modules for different DEMO concepts: HCPB, HCLL, WCLL, DCLL. • Several parameters affecting tritium breeding ratio (TBR) were investigated. • A set of practical guidelines was prepared for the designers developing the individual breeding blanket concepts. - Abstract: Neutronic analyses were performed to assess systematically the tritium breeding ratio (TBR) variations in the DEMO for the different blanket concepts HCPB, HCLL, WCLL and DCLL DEMOs due to modifications of the blanket configurations. A dedicated automated procedure was developed to fill the breeding modules in the common generic model in correspondence to the different concepts. The TBR calculations were carried out using the MCNP5 Monte Carlo code. The following parameters affecting the global TBR were investigated: TBR poloidal distribution, radial breeder zone depth, {sup 6}Li enrichment, steel content in the breeder modules, poloidal segmentation of the breeder blanket volume, size of gaps between blankets, thickness of the first wall and of the tungsten armour. Based on the results a set of practical guidelines was prepared for the designers developing the individual breeding blanket concepts with the goal to achieve the required tritium breeding performance in DEMO.

  1. Progress of R&D on water cooled ceramic breeder for ITER test blanket system and DEMO

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, Yoshinori, E-mail: kawamura.yoshinori@jaea.go.jp [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Tanigawa, Hisashi; Hirose, Takanori; Enoeda, Mikio [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Sato, Satoshi [Japan Atomic Energy Agency, 2-4 Shirane Shirakata, Tokai, Ibaraki 319-1195 (Japan); Ochiai, Kentaro [Japan Atomic Energy Agency, 2-166 Omotedate Obuchi, Rokkasho, Aomori 039-3212 (Japan); Konno, Chikara; Edao, Yuki; Hayashi, Takumi [Japan Atomic Energy Agency, 2-4 Shirane Shirakata, Tokai, Ibaraki 319-1195 (Japan); Hoshino, Tsuyoshi; Nakamichi, Masaru; Tanigawa, Hiroyasu [Japan Atomic Energy Agency, 2-166 Omotedate Obuchi, Rokkasho, Aomori 039-3212 (Japan); Nishi, Hiroshi; Suzuki, Satoshi; Ezato, Koichiro; Seki, Yohji [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Yamanishi, Toshihiko [Japan Atomic Energy Agency, 2-166 Omotedate Obuchi, Rokkasho, Aomori 039-3212 (Japan)

    2016-11-01

    Highlights: • Thermo-hydraulic calculation in the TBM at the water ingress event has been done. • Shielding calculations for the ITER equatorial port #18 were conducted by using C-lite model. • Prototypic pebbles of Be{sub 17}Ti{sub 2} and Be{sub 12}V had a good oxidation property similar to Be{sub 12}Ti pebble. • Li rich Li{sub 2}TiO{sub 3} pebbles were successfully fabricated using the emulsion method by controlling sintering atmosphere. • New tritium production/recovery experiments at FNS have been started by using ionization chamber as on-line gas monitor. - Abstract: The development of a water cooled ceramic breeder (WCCB) test blanket module (TBM) is being performed as one of the most important steps toward DEMO blanket in Japan. For the TBM testing and development of DEMO blanket, R&D has been performed on the module fabrication technology, breeder and multiplier pebble fabrication technology, tritium production rate evaluation, as well as structural and safety design activities. The fabrication of full-scale first wall, side walls, breeder pebble bed box and back wall was completed, and assembly of TBM with box structure was successfully achieved. Development of advanced breeder and multiplier pebbles for higher chemical stability was continued for future DEMO blanket application. From the view point of TBM test result evaluation and DEMO blanket performance design, the development of the blanket tritium transport simulation technology, investigation of the TBM neutron measurement technology and the evaluation of the tritium production and recovery test using D-T neutron in the fusion neutron source (FNS) facility has been performed. This paper provides an overview of the recent achievements of the development of the WCCB Blanket in Japan.

  2. Activation analysis and characteristics of the European community water cooled ceramic breeder blanket design proposal for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Petrizzi, L.; Rado, V. [ENEA-ERG-FUS, Frascati (Italy); Cepraga, D.G. [ENEA-INN-FIS, Bologna (Italy)

    1994-12-31

    The European Community (EC) Home Team has proposed various alternative blanket designs to the basic concept (essentially integrated first wall, cooled by liquid metal, with structures made by vanadium alloys). One of the EC proposal is the Water Cooled Ceramic Blanket developed on the basis of a common action between NET and ENEA. It is based on a more conservative approach, but involving well proven technologies and qualified materials: SS-316L as structural material, Li{sub 2}ZrO{sub 3} as first breeder material choice (50% Li{sup 6} enrichment) and low temperature water coolant (160/200{degrees}C). Beryllium has been chosen as multiplying material. The nominal performance are: 1 MW/m{sup 2} as average neutron wall load, corresponding to 1.5 GW fusion power, 1 MW-y/m{sup 2} beneath it has been proved to withstand power excursion till 5 GW. The proposed blanket concept is based on a Breeder Inside Tube (BIT) type technology, with poloidal breeding elements, each one consisting of two concentric tubes. Breeder pebbles are filled into the inner tube, the water coolant flows in the annular channel between the two tubes. Beryllium pebbles fill the space of the blanket box outside the outer tube. A helium purge gas flows through the breeder pebbles bed for tritium recovery. Alternative operating water temperature and pressure are proposed, considering also batch tritium recovery.

  3. A ceramic breeder in a poloidal tube blanket for a tokamak reactor

    Energy Technology Data Exchange (ETDEWEB)

    Amici, A.; Anzidei, L.; Gallina, M.; Rado, V.; Simbolotti, G.; Violante, V.; Zampaglione, V.; Petrizzi, L. (Associazione Euratom-CNEN sulla Fusione, Centro di Frascati (Italy))

    1989-04-01

    A conceptual study of a helium-cooled solid breeder blanket for a tokamak reactor is presented. Tritium breeding capability together with system reliability are taken as the main design criteria. The blanket consists of tubular poloidal modules made of a central bundle of ceramic rods ({gamma}LiAlO/sub 2/) with a coaxial distribution of the inlet/outlet coolant flow (He) surrounded by a multiplier material (Be) in the form of bored bricks. The Be to {gamma}LiAlO/sub 2/ volume ratio is 4/1. The He inlet and outlet branches are cooling Be and {gamma}LiAlO/sub 2/, respectively. A purge He flow running through small central holes of the ceramic rods is derived from the main flow. Under the typical conditions of a tokamak reactor (neutron wall load=2 MW/m/sup 2/), a full coverage tritium breeding ratio of 1.47 is achieved for the following design and operating parameters: outlet He temperature=570/sup 0/C; inlet He temperature=250/sup 0/; total extracted power=2700 MW; He pumping power percentage=2%; minimum/maximum {gamma}LiAlO/sub 2/ temperature=400/900/sup 0/C; maximum structural temperature=475/sup 0/C; and maximum Be temperature=525/sup 0/C. (orig.).

  4. Thermal-hydraulic analysis on the whole module of water cooled ceramic breeder blanket for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Kecheng; Ma, Xuebin [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Cheng, Xiaoman [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Lin, Shuang [University of Science and Technology of China, Hefei, Anhui, 230027 (China); Huang, Kai [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Liu, Songlin, E-mail: slliu@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China)

    2016-11-15

    Highlights: • The 3D thermal hydraulic analysis on the whole module of WCCB is performed by CFD method. • Temperature field and mass flow distribution have been obtained. • The design of WCCB is reasonable from the perspective of thermal-hydraulics. • The scheme for further optimization has been proposed. - Abstract: The Water Cooled Ceramic Breeder blanket (WCCB) is being researched for Chinese Fusion Engineering Test Reactor (CFETR). The thermal-hydraulic analysis is essential because the blanket should remove the high heat flux from the plasma and the volumetric heat generated by neutrons. In this paper, the detailed three dimensional (3D) thermal hydraulic analysis on the whole module of WCCB blanket has been performed by Computational Fluid Dynamics (CFD) method, which is capable of solving conjugate heat transfer between solid structure and fluid. The main results, including temperature field, distribution of mass flow rate and coolant pressure drop, have been calculated simultaneously. These provides beneficial guidance data for the further structural optimization and for the design arrangement of primary and secondary circuit. Under the total heat source of 1.23 MW, the coolant mass flow rate of 5.457 kg/s is required to make coolant water corresponding to the Pressurized Water Reactor (PWR) condition (15.5 MPa, 285 °C–325 °C), generating the total coolant pressure drop (△P) of 0.467 MPa. The results show that the present structural design can make all the materials effectively cooled to the allowable temperature range, except for a few small modifications on the both sides of FW. The main components, including the first wall (FW), cooling plates (CPs), side wall (SWs)&stiffening plates (SPs) and the manifold(1–4), dominate 4.7%/41.7%/13%/40.6% of the total pressure drop, respectively. Additionally, the mass flow rate of each channel has been obtained, showing the peak relative deviation of 3.4% and 2% from the average for the paratactic

  5. Optimization of the breeder zone cooling tubes of the DEMO Water-Cooled Lithium Lead breeding blanket

    Energy Technology Data Exchange (ETDEWEB)

    Di Maio, P.A.; Arena, P.; Bongiovì, G. [Dipartimento di Energia, Ingegneria dell’Informazione e Modelli Matematici, Università di Palermo, Viale delle Scienze, Palermo (Italy); Chiovaro, P., E-mail: pierluigi.chiovaro@unipa.it [Dipartimento di Energia, Ingegneria dell’Informazione e Modelli Matematici, Università di Palermo, Viale delle Scienze, Palermo (Italy); Del Nevo, A. [ENEA Brasimone, Camugnano, BO (Italy); Forte, R. [Dipartimento di Energia, Ingegneria dell’Informazione e Modelli Matematici, Università di Palermo, Viale delle Scienze, Palermo (Italy)

    2016-11-01

    Highlights: • Determination of an optimal configuration for the breeder zone cooling tubes. • Attention has been focused on the toroidal–radial breeder zone cooling tubes lay out. • A theoretical-computational approach based on the Finite Element Method (FEM) has been followed, adopting a qualified commercial FEM code. • Five different configurations have been investigated to optimize the breeder zone cooling tubes arrangement fulfilling all the rules prescribed by safety codes. - Abstract: The determination of an optimal configuration for the breeder zone (BZ) cooling tubes is one of the most important issues in the DEMO Water-Cooled Lithium Lead (WCLL) breeding blanket R&D activities, since BZ cooling tubes spatial distribution should ensure an efficient heat power removal from the breeder, avoiding hotspots occurrence in the thermal field. Within the framework of R&D activities supported by the HORIZON 2020 EUROfusion Consortium action on the DEMO WCLL breeding blanket design, a campaign of parametric analyses has been launched at the Department of Energy, Information Engineering and Mathematical Models of the University of Palermo (DEIM), in close cooperation with ENEA-Brasimone, in order to assess the potential influence of BZ cooling tubes number on the thermal performances of the DEMO WCLL outboard breeding blanket equatorial module under the nominal steady state operative conditions envisaged for it, optimizing their geometric configuration and taking also into account that a large number of cooling pipes can deteriorate the tritium breeding performances of the module. In particular, attention has been focused on the toroidal-radial option for the BZ tube bundles lay-out and a parametric study has been carried out taking into account different tube bundles arrangement within the module. The study has been carried out following a numerical approach, based on the finite element method (FEM), and adopting a qualified commercial FEM code. Results

  6. Progress in the KIT approach for development of the HCPB TBM stiffening plate feasibility mock up fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Neuberger, Heiko, E-mail: heiko.neuberger@kit.edu [Karlsruher Institut für Technologie (KIT), Institut für Neutronenphysik und Reaktortechnik (INR) (Germany); Rey, Jörg [Karlsruher Institut für Technologie (KIT), Institut für Neutronenphysik und Reaktortechnik (INR) (Germany); Materna-Morris, Edeltraud; Bolich, Daniel [Karlsruher Institut für Technologie (KIT), Institut für Angewandte Materialien (IAM-AWP) (Germany); Handl, Thomas [WBHS Wärmebehandlungsservice, Am Hof 5/14, 1010 Wien (Austria); Milker, Torsten [TRUMPF Laser- und Systemtechnik GmbH, Johann-Maus-Straße 2, 71254 Ditzingen (Germany)

    2013-06-15

    Sub-component manufacturing and assembly concepts for the fabrication of the Helium Cooled Pebble Bed Test Blanket Module have been developed since more than one decade in the KIT. In the present design the structure of the HCPB TBM can be sub-divided into three key components: (i) TBM box, (ii) stiffening plates and (iii) the breeder zone. The present fabrication and assembly routines is based on the assumption that each of the aforementioned sub-components can be assembled in parallel and independently before assembling the TBM. Therefore the procedures to fabricate these sub-components can be addressed in independent tasks. This paper shows the results of the KIT/industry collaboration with the final goal to develop a set of preliminary welding procedure specifications (pWPS) for the assembly of the HCPB TBM stiffening plate. Recently a promising set of draft pWPS could be identified in medium scale fabrication experiments. This paper recalls the results of qualification routines according to ISO 15614-11 (RCC-MR Edition 2007, RS 3570) in order to verify the parameters.

  7. Engineering studies to support a liquid sodium cooled pebble bed target/blanket for an accelerator breeder

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, K.C.; Malenfant, R.E.

    1977-01-01

    Preliminary calculations on using a liquid sodium cooled pebble bed of thorium metal for the target and blanket of a particle accelerator to convert fertile material to fissile have indicated the concept has considerable merit. Fuel management is simple and continuous on-line feed is effected. Additional features include excellent heat transfer, low pressure drop, minimization of structures and enhanced safety. Promising features strongly suggest that the work be continued to further refine the studies. Although specific to the target and blanket of the accelerator breeder concept, the work is readily extended to a high efficiency liquid metal cooled nuclear reactor employing a pebble bed as the fuel. 10 refs., 4 figs., 1 tab.

  8. Numerical research on the neutronic/thermal-hydraulic/mechanical coupling characteristics of the optimized helium cooled solid breeder blanket for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Shijie; Zhang, Dalin, E-mail: dlzhang@mail.xjtu.edu.cn; Cheng, Jie; Tian, Wenxi; Su, G.H.

    2017-01-15

    As one of the candidate tritium breeding blankets for Chinese Fusion Engineering Test Reactor (CFETR), a conceptual structure of the helium cooled solid breeder blanket has recently been proposed. The neutronic, thermal-hydraulic and mechanical characteristics of the blanket directly affect its tritium breeding and safety performance. Therefore, neutronic/thermal-hydraulic/mechanical coupling analyses are of vital importance for a reliable blanket design. In this work, first, three-dimensional neutronics analysis and optimization of the typical outboard equatorial blanket module (No. 12) were performed for the comprehensive optimal scheme. Then, thermal and fluid dynamic analyses of the scheme under both normal and critical conditions were performed and coupled with the previous neutronic calculation results. With thermal-hydraulic boundaries, thermo-mechanical analyses of the structure materials under normal, critical and blanket over-pressurization conditions were carried out. In addition, several parametric sensitivity studies were also conducted to investigate the influences of the main parameters on the blanket temperature distributions. In this paper, the coupled analyses verify the reasonability of the optimized conceptual design preliminarily and can provide an important reference for the further analysis and optimization design of the CFETR helium cooled solid breeder blanket.

  9. Status report. KfK contribution to the development of DEMO-relevant test blankets for NET/ITER. Pt. 1: Self-cooled liquid metal breeder blanket. Vol. 1. Summary

    Energy Technology Data Exchange (ETDEWEB)

    Malang, S.; Reimann, J.; Sebening, H. [comps.; Barleon, L.; Bogusch, E.; Bojarsky, E.; Borgstedt, H.U.; Buehler, L.; Casal, V.; Deckers, H.; Feuerstein, H.; Fischer, U.; Frees, G.; Graebner, H.; John, H.; Jordan, T.; Kramer, W.; Krieg, R.; Lenhart, L.; Malang, S.; Meyder, R.; Norajitra, P.; Reimann, J.; Schwenk-Ferrero, A.; Schnauder, H.; Stieglitz, R.; Oschinski, J.; Wiegner, E.

    1991-12-01

    A self-cooled liquid metal breeder blanket for a fusion DEMO-reactor and the status of the development programme is described as a part of the European development programme of DEMO relevant test blankets for NET/ITER. Volume 1 (KfK 4907) contains a summary, Volume 2 (KfK 4908) a more detailed version of the report. Both volumes contain sections on previous studies on self-cooled liquid metal breeder blankets, the reference blanket design for a DEMO-reactor, a typical test blanket design including the ancillary loop system and the building requirements for NET/ITER together with the present status of the associated R and D-programme in the fields of neutronics, magnetohydrodynamics, tritium removal and recovery, liquid metal compatibility and purification, ancillary loop system, safety and reliability. An outlook is given regarding the required R and D-programme for the self-cooled liquid metal breeder blanket prior to tests in NET/ITER and the relevant test programme to be performed in NET/ITER. (orig.). [Deutsch] Ein selbstgekuehltes Fluessigmetall-Brutblanket fuer einen DEMO Fusionsreaktor und der Stand der Entwicklungsarbeiten, als Teil des Europaeischen Entwicklungsprogramms fuer ein DEMO-relevantes Testblanket fuer NET/ITER werden beschrieben. Band 1 (KfK 4907) enthaelt die Zusammenfassung und Band 2 (KfK 4708) den detaillierten Bericht. In den beiden Berichten werden bisher durchgefuehrte Untersuchungen fuer selbstgekuehlte Fluessigmetallbrutblankets beschrieben. Es werden der Referenzentwurf fuer das DEMO-Reaktorblanket und ein typischer Entwurf fuer ein Testblanket in NET/ITER mit den dazugehoerigen externen Kreislaeufen und einem Komponentenaufstellungsplan vorgestellt. Der augenblickliche Stand der Forschungs- und Entwicklungsarbeiten bezueglich: Neutronenrechnungen, Magnetohydrodynamik (MHD), Tritiumgewinnung, Bestaendigkeit im Fluessigmetall, Fluessigmetallreinigung sowie Sicherheit und Zuverlaessigkeit der Kreislaeufe wird aufgezeigt. Es wird ein

  10. Status report. KfK contribution to the development of DEMO-relevant test blankets for NET/ITER. Pt. 1: Self-cooled liquid metal breeder blanket. Vol. 2. Detailed version

    Energy Technology Data Exchange (ETDEWEB)

    John, H.; Malang, S.; Sebening, H. [comps.; Barleon, L.; Bojarsky, E.; Borgstedt, H.U.; Buehler, L.; Casal, V.; Deckers, H.; Feuerstein, H.; Fischer, U.; Frees, G.; Graebner, H.; John, H.; Jordan, T.; Kramer, W.; Krieg, R.; Lenhart, L.; Meyder, R.; Norajitra, P.; Reiser, H.; Reimann, J.; Schwenk-Ferrero, A.; Schnauder, H.; Stieglitz, R.; Oschinski, J.; Wiegner, E. [Kernforschungszentrum Karlsruhe GmbH (Germany). Projekt Kernfusion; Bogusch, E. [Interatom GmbH, Bergisch Gladbach (Germany)

    1991-12-01

    A self-cooled liquid metal breeder blanket for a fusion DEMO-reactor and the status of the development programme is described as a part of the European development programme of DEMO relevant test blankets for NET/ITER. Volume 1 (KfK 4907) contains a summary. Volume 2 (KfK 4908) a more detailed version of the report. Both volumes contain sections on previous studies on self-cooled liquid metal breeder blankets, the reference blanket design for a DEMO-reactor, a typical test blanket design including the ancillary loop system and the building requirements for NET/ITER together with the present status of the associated RandD-programme in the fields of neutronics, magnetohydrodynamics, tritium removal and recovery, liquid metal compatibility and purification, ancillary loop system, safety and reliability. An outlook is given regarding the required RandD-programme for the self-cooled liquid metal breeder blanket prior to tests in NET/ITER and the relevant test programme to be performed in NET/ITER. (orig.). [Deutsch] Ein selbstgekuehltes Fluessigmetall-Brutblanket fuer einen DEMO Fusionsreaktor und der Stand der Entwicklungsarbeiten, als Teil des Europaeischen Entwicklungsprogramms fuer ein DEMO-relevantes Testblanket fuer NET/ITER werden beschrieben. Band 1 (KfK 4907) enthaelt die Zusammenfassung und Band 2 (KfK 4708) den detaillierten Bericht. In den beiden Berichten werden bisher durchgefuehrte Untersuchungen fuer selbstgekuehlte Fluessigmetallbrutblankets beschrieben. Es werden der Referenzentwurf fuer das DEMO-Reaktorblanket und ein typischer Entwurf fuer ein Testblanket in NET/ITER mit den dazugehoerigen externen Kreislaeufen und einem Komponentenaufstellungsplan vorgestellt. Der augenblickliche Stand der Forschungs- und Entwicklungsarbeiten bezueglich: Neutronenrechnungen, Magnetohydrodynamik (MHD), Tritiumgewinnung, Bestaendigkeit im Fluessigmetall, Fluessigmetallreinigung und Sicherheit und Zuverlaessigkeit der Kreislaeufe wird aufgezeigt. Es wird ein Ausblick

  11. Preliminary accident analysis of Loss of Off-Site Power and In-Box LOCA for the CFETR helium cooled solid breeder blanket

    Energy Technology Data Exchange (ETDEWEB)

    Lian, Qiang; Cui, Shijie [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, 710049 (China); Shaanxi Key Lab. of Advanced Nuclear Energy and Technology, Xi’an Jiaotong University, Xi’an, 710049 (China); Tian, Wenxi, E-mail: wxtian@mail.xjtu.edu.cn [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, 710049 (China); Shaanxi Key Lab. of Advanced Nuclear Energy and Technology, Xi’an Jiaotong University, Xi’an, 710049 (China); Zhang, Jing; Zhang, Dalin; Su, G.H. [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, 710049 (China); Shaanxi Key Lab. of Advanced Nuclear Energy and Technology, Xi’an Jiaotong University, Xi’an, 710049 (China)

    2017-05-15

    Highlights: • The CFETR HCSB blanket has been investigated using RELAP5. • Loss of Off-Site Power is investigated. • The parametric analyses during In-Box LOCA are investigated. • The HCSB blanket for CFETR is designed with sufficient decay heat removal capability. - Abstract: As one of three candidate tritium breeding blanket concepts for Chinese Fusion Engineering Test Reactor (CFETR), a conceptual structure of helium cooled solid breeder (HCSB) blanket was recently proposed. In this paper, the preliminary thermal-hydraulic and safety analyses of the typical outboard equatorial blanket module (No.12) have been carried out using RELAP5/Mod3.4 code. Two design basis accidents are investigated based on the steady-state initialization, including Loss of Off-Site Power and In-Box Loss of Coolant Accident (LOCA). The differences between circulator coast down and circulator rotor locked under Loss of Off-Site Power are compared. Regarding the In-Box LOCA, the influences of different break sizes and locations are thoroughly analyzed based on a relatively accurate modeling method of the heat structures in sub-modules. The analysis results show that the blanket and the combined helium cooling system (HCS) are designed with sufficient decay heat removal capability for both accidents, which can preliminarily verify the feasibility of the conceptual design. The research work can also provide an important reference for parameter optimization of the blanket and its HCS in the next stage.

  12. The effect of γ-radiation in Li{sub 4}SiO{sub 4} ceramic breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Carella, E., E-mail: elisabetta.carella@externos.ciemat.es [UNED Foundation, C/Francisco de Rojas, 2, 28010 Madrid (Spain); National Fusion Laboratory, CIEMAT, Av. Complutense 40, 28040 Madrid (Spain); Hernández, T. [National Fusion Laboratory, CIEMAT, Av. Complutense 40, 28040 Madrid (Spain)

    2015-01-15

    Highlights: • Li{sub 4}SiO{sub 4} is γ-irradiated with different doses (5, 10 and 13 MGy) and its electrical bulk conductivity measured by EIS. • The electrical measurements are compared with SiO{sub 2} confirming the charge carrier role of Li{sup +} under thermal activation. • The recombination effect of temperature during irradiation has been observed. - Abstract: Lithium orthosilicate (Li{sub 4}SiO{sub 4}) is considered one of the best candidates for the solid breeder blanket system (BBs) of future thermonuclear reactors. During reactor operation it will be bombarded by neutrons and gamma radiation which may alter its composition and properties, affecting its shielding role. The electrochemical impedance spectroscopy (EIS) is here used as a non-destructive tool for monitoring the electrical bulk conductivity of Li{sub 4}SiO{sub 4} ceramic after different ionizing damaging treatments. The compound fabricated in our laboratories, was irradiated by a {sup 60}Co in the Nayade-facility (CIEMAT-Spain). Several studies with slight experimental variations were realized and here presented to understand the dynamic of the charge carriers’ movement and the role of intrinsic and extrinsic defects on the electrical properties of this candidate ceramic.

  13. Neutronics Evaluation of Lithium-Based Ternary Alloys in IFE Blankets

    Energy Technology Data Exchange (ETDEWEB)

    Jolodosky, A. [Univ. of California, Berkeley, CA (United States); Fratoni, M. [Univ. of California, Berkeley, CA (United States)

    2015-09-22

    Lithium is often the preferred choice as breeder and coolant in fusion blankets as it offers excellent heat transfer and corrosion properties, and most importantly, it has a very high tritium solubility and results in very low levels of tritium permeation throughout the facility infrastructure. However, lithium metal vigorously reacts with air and water and exacerbates plant safety concerns. For this reason, over the years numerous blanket concepts have been proposed with the scope of reducing concerns associated with lithium. The European helium cooled pebble bed breeding blanket (HCPB) physically confines lithium within ceramic pebbles. The pebbles reside within a low activation martensitic ferritic steel structure and are cooled by helium. The blanket is composed of the tritium breeding lithium ceramic pebbles and neutron multiplying beryllium pebbles. Other blanket designs utilize lead to lower chemical reactivity; LiPb alone can serve as a breeder, coolant, neutron multiplier, and tritium carrier. Blankets employing LiPb coolants alongside silicon carbide structural components can achieve high plant efficiency, low afterheat, and low operation pressures. This alloy can also be used alongside of helium such as in the dual-coolant lead-lithium concept (DCLL); helium is utilized to cool the first wall and structural components made up of low-activation ferritic steel, whereas lithium-lead (LiPb) acts as a self-cooled breeder in the inner channels of the blanket. The helium-cooled steel and lead-lithium alloy are separated by flow channel inserts (usually made out of silicon carbide) which thermally insulate the self-cooled breeder region from the helium cooled steel walls. This creates a LiPb breeder with a much higher exit temperature than the steel which increases the power cycle efficiency and also lowers the magnetohydrodynamic (MHD) pressure drop [6]. Molten salt blankets with a mixture of lithium, beryllium, and fluorides (FLiBe) offer good tritium breeding

  14. TOKOPS: Tokamak Reactor Operations Study: The influence of reactor operations on the design and performance of tokamaks with solid-breeder blankets: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Conn, R.W.; Ghoniem, N.M.; Firestone, M.A. (eds.)

    1986-09-01

    Reactor system operation and procedures have a profound impact on the conception and design of power plants. These issues are studied here using a model tokamak system employing a solid-breeder blanket. The model blanket is one which has evolved from the STARFIRE and BCSS studies. The reactor parameters are similar to those characterizing near-term fusion engineering reactors such as INTOR or NET (Next European Tokamak). Plasma startup, burn analysis, and methods for operation at various levels of output power are studied. A critical, and complicating, element is found to be the self-consistent electromagnetic response of the system, including the presence of the blanket and the resulting forces and loadings. Fractional power operation, and the strategy for burn control, is found to vary depending on the scaling law for energy confinement, and an extensive study is reported. Full-power reactor operation is at a neutron wall loading pf 5 MW/m/sup 2/ and a surface heat flux of 1 MW/m/sup 2/. The blanket is a pressurized steel module with bare beryllium rods and low-activation HT-9-(9-C-) clad LiAlO/sub 2/ rods. The helium coolant pressure is 5 MPa, entering the module at 297/sup 0/C and exiting at 550/sup 0/C. The system power output is rated at 1000 MW(e). In this report, we present our findings on various operational scenarios and their impact on system design. We first start with the salient aspects of operational physics. Time-dependent analyses of the blanket and balance of plant are then presented. Separate abstracts are included for each chapter.

  15. Thermo-mechanical characterization of ceramic pebbles for breeding blanket

    Energy Technology Data Exchange (ETDEWEB)

    Lo Frano, Rosa, E-mail: rosa.lofrano@ing.unipi.it; Aquaro, Donato; Scaletti, Luca

    2016-11-01

    Highlights: • Experimental activities to characterize the Li{sub 4}SiO{sub 4}. • Compression tests of pebbles. • Experimental evaluation of thermal conductivity of pebbles bed at different temperatures. • Experimental test with/without compression load. - Abstract: An open issue for fusion power reactor is to design a suitable breeding blanket capable to produce the necessary quantity of the tritium and to transfer the energy of the nuclear fusion reaction to the coolant. The envisaged solution called Helium-Cooled Pebble Bed (HCPB) breeding blanket foresees the use of lithium orthosilicate (Li{sub 4}SiO{sub 4}) or lithium metatitanate (Li{sub 2}TiO{sub 3}) pebble beds. The thermal mechanical properties of the candidate pebble bed materials are presently extensively investigated because they are critical for the feasibility and performances of the numerous conceptual designs which use a solid breeder. This study is aimed at the investigation of mechanical properties of the lithium orthosilicate and at the characterization of the main chemical, physical and thermo-mechanical properties taking into account the production technology. In doing that at the Department of Civil and Industrial Engineering (DICI) of the University of Pisa adequate experiments were carried out. The obtained results may contribute to characterize the material of the pebbles and to optimize the design of the envisaged fusion breeding blankets.

  16. Neutronic performance of two European breeder-inside-tube (BIT) blankets for DEMO: the helium-cooled ceramic LiAlO{sub 2} with Be multiplier and the water-cooled liquid Li{sub 17}Pb

    Energy Technology Data Exchange (ETDEWEB)

    Petrizzi, L. [Associazione EURATOM-ENEA sulla Fusione, Frascati (Italy); Rado, V. [Associazione EURATOM-ENEA sulla Fusione, Frascati (Italy)

    1995-03-01

    In support of ENEA activity in the European Community Test Programme, neutron analysis has been performed on the two latest blanket designs: helium-cooled ceramic breeder-inside-tube (BIT) (with LiAlO{sub 2} and Be multiplier) and water-cooled liquid Li{sub 17}Pb in cylindrical modules (CM). The powerful MCNP Monte Carlo code was used (version 4.2). A detailed and accurate description of the geometrical model has been performed by inserting the main reactor details and avoiding breeder material dilution inside the modules. The tritium breeding ratio (TBR) performance is low for the solid breeder BIT blanket (with 10 ports 1.011) due mainly to low blanket coverage near the exhaust duct, and this solution should be revised. The CM Li{sub 17}Pb blanket reaches a sufficient TBR (1.059, with ports) to rely on tritium self-sufficiency. Shielding properties, with respect to the toroidal field coils, have been estimated in a simplified model by means of the ANISN code, supplied with a nuclear data library consistent with that used by MCNP. The analysis suggests that a careful shield thickness/composition design should be used to ensure the shielding capability of the whole blanket plus shield system. (orig.).

  17. Blanket comparison and selection study. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    1983-10-01

    This volume contains extensive data for the following chapters: (1) solid breeder tritium recovery, (2) solid breeder blanket designs, (3) alternate blanket concept screening, and (4) safety analysis. The following appendices are also included: (1) blanket design guidelines, (2) power conversion systems, (3) helium-cooled, vanadium alloy structure blanket design, (4) high wall loading study, and (5) molten salt safety studies. (MOW)

  18. Neturonic performance of two European breeder-inside-tube (BIT) blankets for demo: The helium cooled ceramic LiAlO{sub 2} with be multiplier and the water cooled liquid Li17Pb

    Energy Technology Data Exchange (ETDEWEB)

    Petrizzi, L.; Rado, V. [Centro Ricerche Energia Frascati, Rome (Italy)

    1994-12-31

    In the European Community (EC) Test Blanket programme a selection is foreseen, by 1995 of two blanket designs among those under investigation which can be divided in two groups: those using a solid ceramic breeder, all of them helium cooled and with Be neutron multiplier and those using the Ll{sub 17}-Pb liquid metal breeder which could be self or water cooled, depending on the proposal. The design studies have been carried out according to the latest DEMONET specification (2200 MW fusion power, 20000 hours irradiation full power). The present study concerns the most recent neutronic analyses of the two blankets design in which there is ENEA contribution. Both are based on a BIT concept with poloidal running breeding elements which follow the first wall curvature: (1) the helium cooled ceramic BIT with {gamma}-LiAlO{sub 2} breeder material (75% Ll{sup 6} enriched) and Be as neutron multiplier, which has been studied by ENEA since a long time and from 1990, jointly developed with CEA; (2) the water cooled liquid Li{sub 17}Pb (90% Ll{sup 6} enriched) inside cylindrical breeder modules which was originally proposed by JRC Ispra and now it is jointly developed CEA and ENEA.

  19. Neutronic performance of two european breeder-inside tube (BIT) blankets for DEMO: Helium-cooled ceramic LiAlO{sub 2} with Be multiplier and water-cooled liquid Li17Pb 2103. international symposium on fusion nuclear technologies (ISFNT-3)

    Energy Technology Data Exchange (ETDEWEB)

    Petrizzi, L.; Rado, V. [Associazione EURATOM-ENEA sulla Fusione, Frascati (Italy)

    1994-11-01

    In support of ENEA (Italian Agency for New Technologies, Energy and the Environment) activity in the European Community Test Programme, a neutronic analysis has been performed on the two latest blanket design relative to helium-cooled ceramic BIT (breeder-inside-tube) (with LiAIO{sub 2} and Be multiplier) and the water-cooled liquid Li17Pb in cylindrical modules. At this scope the powerful MCNP Monte Carlo code has been used (version 4). A detailed and accurate description of the geometrical model has been performed inserting the main reactor details and avoiding breeder material dilution inside the modules. TBR performance is low for the solid breeder BIT (with 10 ports 1.011) due mainly to low blanket coverage near the exhaust duct and this solution should be revised. CM Li17Pb blanket reaches sufficient TBR (1.059, with ports) to rely on tritium self-sufficiency. Shielding properties, with respect to the toroidal field coils, have been estimated in a simplified model by means of the ANISN code, supplied with nuclear data library coherent with the one used by MCNP. The analysis suggests a careful shield thickness/composition design to be confident on the shielding capability of the whole blanket and shield system.

  20. Finalization of the conceptual design of the auxiliary circuits for the European test blanket systems

    Energy Technology Data Exchange (ETDEWEB)

    Aiello, A., E-mail: antonio.aiello@enea.it [ENEA UTIS – C.R. Brasimone, Bacino del Brasimone, I-40032 Camugnano, BO (Italy); Ghidersa, B.E. [Karlsruher Institut für Technologie (KIT) – Institut für Neutronenphysik und Reaktortechnik (INR), D-76021 Karlsruhe (Germany); Utili, M. [ENEA UTIS – C.R. Brasimone, Bacino del Brasimone, I-40032 Camugnano, BO (Italy); Vala, L. [Sustainable Energy (SUSEN), Technological Experimental Circuits, Centrum vyzkumu Rez s.r.o. (CV Rez), Hlavni c.p. 130, CZ-250 68 Husinec-Rez (Czech Republic); Ilkei, T. [Institute for Particle and Nuclear Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, Budapest H-1525 (Hungary); Di Gironimo, G.; Mozzillo, R.; Tarallo, A. [CREATE/University of Naples Federico II, Department of Industrial Engineering, P.le Tecchio 80, 80125 Naples (Italy); Ricapito, I.; Calderoni, P. [TBM& MD Project, Fusion for Energy, EU Commission, Carrer J. Pla, 2, Building B3, 08019 Barcelona (Spain)

    2015-10-15

    In view of the ITER conceptual design review, the design of the ancillary systems of the European test blanket systems presented in [1] has been updated and made consistent with the ITER requirements for the present design phase. Europe is developing two concepts of TBM, the helium cooled lithium lead (HCLL) and the helium cooled pebble bed (HCPB) one, having in common the cooling media, pressurized helium at 8 MPa [2]. TBS, namely helium cooling system (HCS), coolant purification system (CPS), lead lithium loop and tritium extraction/removal system (TES–TRS) have the purpose to cool down the TBM and to remove tritium to be driven to TEP from breeder and coolant. These systems are placed in port cell 16 (PC#16), chemical and volume control system (CVCS) area and tritium building. Starting from the pre-conceptual design developed in the past, more mature technical interfaces with the ITER facility have been consolidated and iterative design activities were performed to comply with design requirements/specifications requested by IO to conclude the conceptual design phase. In this paper the present status of design of the TBS is presented together with the preliminary integration in ITER areas.

  1. Use of Nuclear Data Sensitivity and Uncertainty Analysis for the Design Preparation of the HCLL Breeder Blanket Mockup Experiment for ITER

    Directory of Open Access Journals (Sweden)

    I. Kodeli

    2008-01-01

    Full Text Available An experiment on a mockup of the test blanket module based on helium-cooled lithium lead (HCLL concept will be performed in 2008 in the Frascati Neutron Generator (FNG in order to study neutronics characteristics of the module and the accuracy of the computational tools. With the objective to prepare and optimise the design of the mockup in the sense to provide maximum information on the state-of-the-art of the cross-section data the mockup was pre-analysed using the deterministic codes for the sensitivity/uncertainty analysis. The neutron fluxes and tritium production rate (TPR, their sensitivity to the underlying basic cross-sections, as well as the corresponding uncertainties were calculated using the deterministic transport codes (DOORS package, the sensitivity/uncertainty code package SUSD3D, and the VITAMINJ/ COVA covariance matrix libraries. The cross-section reactions with largest contribution to the uncertainty of the calculated TPR were identified to be (n,2n and (n,3n reactions on lead. The conclusions of this work support the main benchmark design and suggest some modifications and improvements. In particular this study recommends the use, as far as possible, of both natural and enriched lithium pellets for the TRP measurements. The combined use is expected to provide additional and complementary information on the sensitive cross-sections.

  2. Updated reference design of a liquid metal cooled tandem mirror fusion breeder

    Energy Technology Data Exchange (ETDEWEB)

    Berwald, D.H.; Whitley, R.H.; Garner, J.K.; Gromada, R.J.; McCarville, T.J.; Moir, R.W.; Lee, J.D.; Bandini, B.R.; Fulton, F.J.; Wong, C.P.C.; Maya, I.; Hoot, C.G.; Schultz, K.R.; Miller, L.G.; Beeston, J.M.; Harris, B.L.; Westman, R.A.; Ghoniem, N.M.; Orient, G.; Wolfer, M.; DeVan, J.H.; Torterelli, P.

    1985-09-01

    Detailed studies of key techinical issues for liquid metal cooled fusion breeder (fusion-fission hybrid blankets) have been performed during the period 1983-4. Based upon the results of these studies, the 1982 reference liquid metal cooled tandem mirror fusion breeder blanket design was updated and is described. The updated reference blankets provides increased breeding and lower technological risk in comparison with the original reference blanket. In addition to the blanket design revisions, a plant concept, cost, and fuel cycle economics assessment is provided. The fusion breeder continues to promise an economical source of fissile fuel for the indefinite future.

  3. U.S. technical report for the ITER blanket/shield: A. blanket: Topical report, July 1990--November 1990

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    Three solid-breeder water-cooled blanket concepts have been developed for ITER based on a multilayer configuration. The primary difference among the concepts is in the fabricated form of breeder and multiplier. All the concepts have beryllium for neutron multiplication and solid-breeder temperature control. The blanket design does not use helium gaps or insulator material to control the solid breeder temperature. Lithium oxide (Li{sub 2}O) and lithium zirconate (Li{sub 2}ZrO{sub 3}) are the primary and the backup breeder materials, respectively. The lithium-6 enrichment is 95%. The use of high lithium-6 enrichment reduces the solid breeder volume required in the blanket and consequently the total tritium inventory in the solid breeder material. Also, it increases the blanket capability to accommodate power variation. The multilayer blanket configuration can accommodate up to a factor of two change in the neutron wall loading without violating the different design guidelines. The blanket material forms are sintered products and packed bed of small pebbles. The first concept has a sintered product material (blocks) for both the beryllium multiplier and the solid breeder. The second concept, the common ITER blanket, uses a packed bed breeder and beryllium blocks. The last concept is similar to the first except for the first and the last beryllium zones. Two small layers of beryllium pebbles are located behind the first wall and the back of the last beryllium zone to reduce the total inventory of the beryllium material and to improve the blanket performance. The design philosophy adopted for the blanket is to produce the necessary tritium required for the ITER operation and to operate at power reactor conditions as much as possible. Also, the reliability and the safety aspects of the blanket are enhanced by using low-pressure water coolant and the separation of the tritium purge flow from the coolant system by several barriers.

  4. An assessment of the base blanket for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Raffray, A.R.; Abdou, M.A.; Ying, A.

    1991-12-31

    Ideally, the ITER base blanket would provide the necessary tritium for the reactor to be self-sufficient during operation, while having minimal impact on the overall reactor cost, reliability and safety. A solid breeder blanket has been developed in CDA phase in an attempt to achieve such objectives. The reference solid breeder base blanket configurations at the end of the CDA phase has many attractive features such as a tritium breeding ratio (TBR) of 0.8--0.9 and a reasonably low tritium inventory. However, some concerns regarding the risk, cost and benefit of the base blanket have been raised. These include uncertainties associated with the solid breeder thermal control and the potentially high cost of the amount of Be used to achieve high TBR and to provide the necessary thermal barrier between the high temperature solid breeder and low temperature coolant. This work addresses these concerns. The basis for the selection of a breeding blanket is first discussed in light of the incremental risk, cost and benefits relative to a non-breeding blanket. Key issues associated with the CDA breeding blanket configurations are then analyzed. Finally, alternative schemes that could enhance the attractiveness and flexibility of a breeding blanket are explored.

  5. An assessment of the base blanket for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Raffray, A.R.; Abdou, M.A.; Ying, A.

    1991-01-01

    Ideally, the ITER base blanket would provide the necessary tritium for the reactor to be self-sufficient during operation, while having minimal impact on the overall reactor cost, reliability and safety. A solid breeder blanket has been developed in CDA phase in an attempt to achieve such objectives. The reference solid breeder base blanket configurations at the end of the CDA phase has many attractive features such as a tritium breeding ratio (TBR) of 0.8--0.9 and a reasonably low tritium inventory. However, some concerns regarding the risk, cost and benefit of the base blanket have been raised. These include uncertainties associated with the solid breeder thermal control and the potentially high cost of the amount of Be used to achieve high TBR and to provide the necessary thermal barrier between the high temperature solid breeder and low temperature coolant. This work addresses these concerns. The basis for the selection of a breeding blanket is first discussed in light of the incremental risk, cost and benefits relative to a non-breeding blanket. Key issues associated with the CDA breeding blanket configurations are then analyzed. Finally, alternative schemes that could enhance the attractiveness and flexibility of a breeding blanket are explored.

  6. Objectives and status of EUROfusion DEMO blanket studies

    Energy Technology Data Exchange (ETDEWEB)

    Boccaccini, L.V., E-mail: lorenzo.boccaccini@kit.edu [Karlsruhe Institute of Technology (KIT) (Germany); Aiello, G.; Aubert, J. [CEA-Saclay, DEN, DM2S, SEMT, F-91191 Gif-sur-Yvette (France); Bachmann, C. [EUROfusion, PPPT, Garching (Germany); Barrett, T. [CCFE, Abingdon OX14 3DB (United Kingdom); Del Nevo, A. [ENEA CR Brasimone, 40032 Camugnano, BO (Italy); Demange, D. [Karlsruhe Institute of Technology (KIT) (Germany); Forest, L. [CEA-Saclay, DEN, DM2S, SEMT, F-91191 Gif-sur-Yvette (France); Hernandez, F.; Norajitra, P. [Karlsruhe Institute of Technology (KIT) (Germany); Porempovic, G. [Fuziotech Engineering Ltd (Hungary); Rapisarda, D. [CIEMAT, Avda. Complutense 40, 28040 Madrid (Spain); Sardain, P. [CEA/IRFM, 13115 Saint-Paul-lès-Durance (France); Utili, M. [ENEA CR Brasimone, 40032 Camugnano, BO (Italy); Vala, L. [Centrum výzkumu Řež, 250 68 Husinec-Řež (Czech Republic)

    2016-11-01

    Highlights: • Short description of the new Breeding Blanket Project in the EUROfusion consortium for the design of the EU PPPT DEMO: objectives. • Presentation of the design approach used in the development of the Breeding Blanket design: requirements. • Breeding Blanket design; in particular the four blanket concepts included in the study are presented, recent results highlighted and the status discussed. • Auxiliary systems and related R&D programme: in particular the work areas addressed in the Project (Tritium Technology, Pb-Li and Solid Breeders Technology, First Wall Design and R&D, Manufacturing) are presented, recent results highlighted and the status discussed. - Abstract: The design of a DEMO reactor requires the design of a blanket system suitable of reliable T production and heat extraction for electricity production. In the frame of the EUROfusion Consortium activities, the Breeding Blanket Project has been constituted in 2014 with the goal to develop concepts of Breeding Blankets for the EU PPPT DEMO; this includes an integrated design and R&D programme with the goal to select after 2020 concepts on fusion plants for the engineering phase. The design activities are presently focalized around a pool of solid and liquid breeder blanket with helium, water and PbLi cooling. Development of tritium extraction and control technology, as well manufacturing and development of solid and PbLi breeders are part of the programme.

  7. Laser fusion driven breeder design study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Berwald, D.H.; Massey, J.V.

    1980-12-01

    The results of the Laser Fusion Breeder Design Study are given. This information primarily relates to the conceptual design of an inertial confinement fusion (ICF) breeder reactor (or fusion-fission hybrid) based upon the HYLIFE liquid metal wall protection concept developed at Lawrence Livermore National Laboratory. The blanket design for this breeder is optimized to both reduce fissions and maximize the production of fissile fuel for subsequent use in conventional light water reactors (LWRs). When the suppressed fission blanket is compared with its fast fission counterparts, a minimal fission rate in the blanket results in a unique reactor safety advantage for this concept with respect to reduced radioactive inventory and reduced fission product decay afterheat in the event of a loss-of-coolant-accident.

  8. Fabrication, properties, and tritium recovery from solid breeder materials

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, C.E. (Argonne National Lab., IL (USA)); Kondo, T. (Japan Atomic Energy Research Inst., Tokyo (Japan)); Roux, N. (CEA Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)); Tanaka, S. (Tokyo Univ. (Japan)); Vollath, D. (Kernforschungszentrum Karlsruhe GmbH (Germany, F.R.))

    1991-01-01

    The breeding blanket is a key component of the fusion reactor because it directly involves tritium breeding and energy extraction, both of which are critical to development of fusion power. The lithium ceramics continue to show promise as candidate breeder materials. This promise was recognized by the International Thermonuclear Experimental Reactor (ITER) design team in its selection of ceramics as the first option for the ITER breeder material. Blanket design studies have indicated properties in the candidate materials data base that need further investigation. Current studies are focusing on tritium release behavior at high burnup, changes in thermophysical properties with burnup, compatibility between the ceramic breeder and beryllium multiplier, and phase changes with burnup. Laboratory and in-reactor tests, some as part of an international collaboration for development of ceramic breeder materials, are underway. 133 refs., 1 fig.

  9. Current design of the European TBM systems and implications on DEMO breeding blanket

    Energy Technology Data Exchange (ETDEWEB)

    Ricapito; Calderoni, P. [Fusion for Energy, 08019 Barcelona (Spain); Aiello, A. [ENEA, Bacino del Brasimone, I-40032 Camugnano, Bo (Italy); Ghidersa, B. [Karlsruher Institut für Technologie, D-76021 Karlsruhe (Germany); Poitevin, Y.; Pacheco, J. [Fusion for Energy, 08019 Barcelona (Spain)

    2016-11-01

    Highlights: • Description of the Helium Cooling Systems of HCLL and HCPB-TBS after the Conceptual Design Review. • Description of the PbLi loop of HCLL-TBS after the Conceptual Design Review. • Description of the possible ROX (Return of Experience) from design and operation of the Test Blanket Systems. • Discussion on the DEBO relevancy of the main technologies adopted in the Helium Cooling Systems and PbLi loop. - Abstract: Europe is committed in developing the design of the two Test Blanket Systems (TBS) based on HCLL (Helium Cooled Lithium Lead) and HCPB (Helium Cooled Pebble Bed) breeding blanket (BB) concepts. The complexity of the TBS design comes not only from the innovative fabrication technologies and materials adopted for Test Blanket Modules (TBM) but also from the requirements and functions that the TBM ancillary systems have to satisfy and implement. Indeed, the main TBM ancillary systems, namely the Helium Cooling System, the Coolant Purification System and Tritium Extraction System, all belonging to the Safety Important Class (SIC), have to implement fundamental functions, like the transport of the surface and volumetric heat from the TBM to the heat sink, the extraction and processing of the tritium generated in the TBM, the confinement of radioactive inventory, the support to the investment protection and safety functions. On top of the full compliance with the ITER safety principles, the design of the TBM systems is focused on providing high operational reliability and availability not to jeopardize ITER program and, at the same time, also a good operational flexibility to make possible the achievement of the main TBM scientific objectives. This paper gives an overview of the design status of the HCLL and HCPB-TBM (ancillary) systems, updated to the conclusion of the conceptual design phase (CDR). The most relevant technologies, the still open points, the main issues related to the integration in ITER and last relevant results from the on

  10. Tritium transport analysis for CFETR WCSB blanket

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Pinghui, E-mail: phzhao@mail.ustc.edu.cn; Yang, Wanli; Li, Yuanjie; Ge, Zhihao; Nie, Xingchen; Gao, Zhongping

    2017-01-15

    Highlights: • A simplified tritium transport model for CFETR WCSB blanket was developed. • Tritium transport process in CFETR WCSB blanket was analyzed. • Sensitivity analyses of tritium transport parameters were carried out. - Abstract: Water Cooled Solid Breeder (WCSB) blanket was put forward as one of the breeding blanket candidate schemes for Chinese Fusion Engineering Test Reactor (CFETR). In this study, a simplified tritium transport model was developed. Based on the conceptual engineering design, neutronics and thermal-hydraulic analyses of CFETR WCSB blanket, tritium transport process was analyzed. The results show that high tritium concentration and inventory exist in primary water loop and total tritium losses exceed CFETR limits under current conditions. Conducted were sensitivity analyses of influential parameters, including tritium source, temperature, flow-rate capacity and surface condition. Tritium performance of WCSB blanket can be significantly improved under a smaller tritium impinging rate, a larger flow-rate capacity or a better surface condition. This work provides valuable reference for the enhancement of tritium transport behavior in CFETR WCSB blanket.

  11. Fission-suppressed hybrid reactor: the fusion breeder

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.; Lee, J.D.; Coops, M.S.

    1982-12-01

    Results of a conceptual design study of a /sup 233/U-producing fusion breeder are presented. The majority of the study was devoted to conceptual design and evaluation of a fission-suppressed blanket and to fuel cycle issues such as fuel reprocessing, fuel handling, and fuel management. Studies in the areas of fusion engineering, reactor safety, and economics were also performed.

  12. Neutronic analyses of the HCPB DEMO reactor using a consistent integral approach

    Energy Technology Data Exchange (ETDEWEB)

    Pereslavtsev, Pavel, E-mail: pavel.pereslavtsev@kit.edu; Lu, Lei; Fischer, Ulrich; Bitz, Oliver

    2014-10-15

    This work is devoted to nuclear design analyses of the new HCPB-type DEMO reactor developed in the frame of the EFDA PPPT program. The neutronic simulations were carried out with the MCNP5 code using a full scale 3D torus sector model of the DEMO reactor. The model was generated with the McCad conversion tool from available CAD models using a consistent integral approach. The neutronic analyses addressed the tritium breeding performance, the nuclear power generation and the shielding capabilities of the reactor. Although tritium self-sufficiency was shown, the tritium breeding performance of the current design calls for further design improvements to arrive at a higher uncertainty margin. The shielding performance of the reactor is close to the limit. Sufficient shielding can be easily provided by a slight increase of the inboard shield thickness.

  13. Fusion reactor blanket with Li17-Pb83 eutectic

    Energy Technology Data Exchange (ETDEWEB)

    Antipenkov, A.; Danilov, I.; Epinatiev, A.; Eremin, S.; Kalinin, G.; Kolganov, V.; Poliksha, V.; Shchipakin, O.; Shiverski, E.; Sidorov, A.; Skladnov, K.; Strebkov, Yu. (Research and Development Inst. of Power Engineering, Moscow (USSR)); Butko, A.; Kuzmin, A. (Moscow Inst. for Hydraulic Engineering and Land-Reclamation (USSR)); Chepovski, A.; Khripunov, V.; Shatalov, G. (Kurchatov Inst. of Atomic Energy, Moscow (USSR))

    1991-04-01

    The article contains some features of using Li17-Pb83 eutectic as a breeder for ITER/OTR fusion reactor. Described blanket design options aim to reduce electromagnetic loads or relieve eutectic/channel interaction. Eutectic channel stress analysis confirms design feasibility. Channel temperature behaviour is analyzed for loss of blanket cooling system power and rupture of a distribution header accidents. First wall and blanket failure rates were evaluated. The results of neutron power density distribution and tritium breeding ratio estimation are presented. Polonium concentration dynamics is estimated for accidental conditions. Some guide-lines for future work and design progress are advised. (orig.).

  14. Fast Breeder Reactor studies

    Energy Technology Data Exchange (ETDEWEB)

    Till, C.E.; Chang, Y.I.; Kittel, J.H.; Fauske, H.K.; Lineberry, M.J.; Stevenson, M.G.; Amundson, P.I.; Dance, K.D.

    1980-07-01

    This report is a compilation of Fast Breeder Reactor (FBR) resource documents prepared to provide the technical basis for the US contribution to the International Nuclear Fuel Cycle Evaluation. The eight separate parts deal with the alternative fast breeder reactor fuel cycles in terms of energy demand, resource base, technical potential and current status, safety, proliferation resistance, deployment, and nuclear safeguards. An Annex compares the cost of decommissioning light-water and fast breeder reactors. Separate abstracts are included for each of the parts.

  15. Tritium permeation reduction through the HCPB steam generator by in-situ oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Perujo, A [E.C. Joint Research Centre-Ispra Site, Institute for advanced Materials, Ispra (Italy); Feuerstein, H.; Reimann, J. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany)

    1998-07-01

    The permeation through the steam generator of the Helium Cooled Pebble Bed Blanket concept can be strongly reduced by natural oxides formed on the INCOLOY 800 tubes. This paper presents the results of different experiments with different deuterium to humidity ratios. All experiments show that INCOLOY 800 readily oxidizes and that permeation reduction factors of at least 100 are easily obtained for blanket conditions. (authors)

  16. Updated conceptual design of helium cooling ceramic blanket for HCCB-DEMO

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Suhao [University of Science and Technology of China, Hefei, Anhui (China); Southwestern Institute of Physics, Chengdu, Sichuan (China); Cao, Qixiang; Wu, Xinghua; Wang, Xiaoyu; Zhang, Guoshu [Southwestern Institute of Physics, Chengdu, Sichuan (China); Feng, Kaiming, E-mail: fengkm@swip.ac.cn [Southwestern Institute of Physics, Chengdu, Sichuan (China)

    2016-11-15

    Highlights: • An updated design of Helium Cooled Ceramic breeder Blanket (HCCB) for HCCB-DEMO is proposed in this paper. • The Breeder Unit is transformed to TBM-like sub-modules, with double “banana” shape tritium breeder. Each sub-module is inserted in space formed by Stiffen Grids (SGs). • The performance analysis is performed based on the R&D development of material, fabrication technology and safety assessment in CN ITER TBM program. • Hot spots will be located at the FW bend side. - Abstract: The basic definition of the HCCB-DEMO plant and preliminary blanket designed by Southwestern Institution of Physics was proposed in 2009. The DEMO fusion power is 2550 MW and electric power is 800 MW. Based on development of R&D in breeding blanket, a conceptual design of helium cooled blanket with ceramic breeder in HCCB-DEMO was presented. The main design features of the HCCB-DEMO blanket were: (1) CLF-1 structure materials, Be multiplier and Li{sub 4}SiO{sub 4} breeder; (2) neutronic wall load is 2.3 MW/m{sup 2} and surface heat flux is 0.43 MW/m{sup 2} (2) TBR ≈ 1.15; (3) geometry of breeding units is ITER TBM-like segmentation; (4)Pressure of helium is 8 MPa and inlet/outlet temperature is 300/500 °C. On the basis of these design, some important analytical results are presented in aspects of (i) neutronic behavior of the blanket; (ii) design of 3D structure and thermal-hydraulic lay-out for breeding blanket module; (iii) structural-mechanical behavior of the blanket under pressurization. All of these assessments proved current stucture fulfill the design requirements.

  17. Design analyses of self-cooled liquid metal blankets

    Energy Technology Data Exchange (ETDEWEB)

    Gohar, Y.

    1986-12-01

    A trade-off study of liquid metal self-cooled blankets was carried out to define the performance of these blankets and to determine the potential to operate at the maximum possible values of the performance parameters. The main parameters considered during the course of the study were the tritium breeding ratio (TBR), the blanket energy multiplication factor, the energy fraction lost to the shield, the lithium-6 enrichment in the breeder material, the total blanket thickness, the reflector material selection, and the compositions of the different blanket zones. Also, a study was carried out to assess the impact of different reactor design choices on the reactor performance parameters. The design choices include the impurity control system (limiter or divertor), the material choice for the limiter, the elimination of tritium breeding from the inboard section of tokamak reactors, and the coolant choice for the nonbreeding inboard blanket. In addition, tritium breeding benchmark calculations were performed using different transport codes and nuclear data libraries. The importance of the TBR in the blanket design motivated the benchmark calculations.

  18. Design of a helium-cooled molten salt fusion breeder

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.; Lee, J.D.; Fulton, F.J.; Huegel, F.; Neef, W.S. Jr.; Sherwood, A.E.; Berwald, D.H.; Whitley, R.H.; Wong, C.P.C.; DeVan, J.H.

    1985-02-01

    A new conceptual blanket design for a fusion reactor produces fissile material for fission power plants. Fission is suppressed by using beryllium, rather than uranium, to multiply neutrons and also by minimizing the fissile inventory. The molten-salt breeding media (LiF + BeF/sub 2/ + TghF/sub 4/) is circulated through the blanket and on to the online processing system where /sup 233/U and tritium are continuously removed. Helium cools the blanket including the steel pipes containing the molten salt. Austenitic steel was chosen because of its ease of fabrication, adequate radiation-damage lifetime, and low corrosion rate by molten salt. We estimate the breeder, having 3000 MW of fusion power, produces 6400 kg of /sup 233/U per year, which is enough to provide make up for 20 GWe of LWR per year (or 14 LWR plants of 4440 MWt) or twice that many HTGRs or CANDUs. Safety is enhanced because the afterheat is low and the blanket materials do not react with air or water. The fusion breeder based on a pre-MARS tandem mirror is estimated to cost $4.9B or 2.35 times an LWR of the same power. The estimated present value cost of the /sup 2/anumber/sup 3/U produced is $40/g if utility financed or $16/g if government financed.

  19. Analysis of a liquid metal cooled blanket transient using ATHENA

    Energy Technology Data Exchange (ETDEWEB)

    Roth, P.A.; Chow, H.

    1985-01-01

    A comprehensive safety analysis code called ATHENA, Advanced Thermal Hydraulic Energy Network Analyzer, is being developed by EG and G Idaho as part of the Fusion Safety Program. This code can be used to analyze transients and system interactions in fusion reactors with a wide variety of coolant, breeder, structural, and magnet materials. In the past, the code has been used to analyze a helium cooled blanket module and a water cooled blanket concept. As new concepts in fusion reactor designs evolve, the ATHENA code developers will add the necessary capabilities to model those concepts.

  20. First wall and blanket module safety enhancement by material selection and design decision

    Energy Technology Data Exchange (ETDEWEB)

    Merrill, B.J.

    1980-01-01

    A thermal/mechanical study has been performed which illustrates the behavior of a fusion reactor first wall and blanket module during a loss of coolant flow event. The relative safety advantages of various material and design options were determined. A generalized first wall-blanket concept was developed to provide the flexibility to vary the structural material (stainless steel vs titanium), coolant (helium vs water), and breeder material (liquid lithium vs solid lithium aluminate). In addition, independent vs common first wall-blanket cooling and coupled adjacent module cooling design options were included in the study. The comparative analyses were performed using a modified thermal analysis code to handle phase change problems.

  1. First adaptation of the European ceramic B. I. T. blanket design to the updated DEMO specifications

    Energy Technology Data Exchange (ETDEWEB)

    Anzidei, L.; Cecchi, P.; Cevolani, S.; Gallina, M.; Petrizzi, L.; Rado, V.; Talarico, C.; Violante, V.; Vettraino, V.; Zampaglione, V. (Associazione Euratom-ENEA sulla Fusione, Frascati (Italy)); Proust, E.; Giancarli, L.; Raepsaet, X.; Szczepanski, J.; Vallette, F.; Baraer, L.; Bielak, B.; Mercier, J. (Commissariat a l' Energie Atomique, DRN/DMT/SERMA, C.E.N. Saclay, 91 - Gif-sur-Yvette (France))

    1991-12-01

    The DEMO specifications defined so as to ensure the consistency of the various blanket conceptual design studies performed within the framework of the European Test Blanket Programme have been recently updated. A very first attempt has been made to adapt the European Ceramic Breeder Inside-Tube DEMO blanket to these new specifications. Two solutions have been investigated. The first would ensure tritium self-sufficiency of the plant with a large safety margin. The other one, which fully preserves the design simplicity and reliability of the initial design, appears to be somewhat marginal from the tritium breeding capability point of view, but to offer good improvement prospects. (orig.).

  2. Overview of design activities for Li/V blankets

    Energy Technology Data Exchange (ETDEWEB)

    Sze, D.K.; Mattas, R.F.

    1997-12-31

    Recent fusion power plant design studies in the US have been conducted within the ARIES project. The most recent design of Li/V blankets was conducted as part of the ARIES-RS design. The ARIES-RS fusion power plant design study is based on reversed-shear (RS) physics with a Li/V (lithium breeder and vanadium structure) blanket. The reversed-shear discharge has been documented in many large tokamak experiments. The plasma in the RS mode has a high beta, low current, and low current drive requirement. Therefore, it is an attractive physics regime for a fusion power plant. The blanket system based on a Li/V has high temperature operating capability, good tritium breeding, excellent high heat flux removal capability, long structural life time, low activation, low after heat and good safety characteristics. For these reasons, the ARIES-RS reactor study selected Li/V as the reference blanket. The combination of attractive physics and attractive blanket engineering is expected to result in a superior power plant design.

  3. Nuclear Analyses of Indian LLCB Test Blanket System in ITER

    Science.gov (United States)

    Swami, H. L.; Shaw, A. K.; Danani, C.; Chaudhuri, Paritosh

    2017-04-01

    Heading towards the Nuclear Fusion Reactor Program, India is developing Lead Lithium Ceramic Breeder (LLCB) tritium breeding blanket for its future fusion Reactor. A mock-up of the LLCB blanket is proposed to be tested in ITER equatorial port no.2, to ensure the overall performance of blanket in reactor relevant nuclear fusion environment. Nuclear analyses play an important role in LLCB Test Blanket System design & development. It is required for tritium breeding estimation, thermal-hydraulic design, coolants process design, radioactive waste management, equipment maintenance & replacement strategies and nuclear safety. The nuclear behaviour of LLCB test blanket module in ITER is predicated in terms of nuclear responses such as tritium production, nuclear heating, neutron fluxes and radiation damages. Radiation shielding capability of LLCB TBS inside and outside bio-shield was also assessed to fulfill ITER shielding requirements. In order to supports the rad-waste and safety assessment, nuclear activation analyses were carried out and radioactivity data were generated for LLCB TBS components. Nuclear analyses of LLCB TBS are performed using ITER recommended nuclear analyses codes (i.e. MCNP, EASY), nuclear cross section data libraries (i.e. FENDL 2.1, EAF) and neutronic model (ITER C-lite v.l). The paper describes a comprehensive nuclear performance of LLCB TBS in ITER.

  4. Production behavior of irradiation defects in solid breeder materials

    Energy Technology Data Exchange (ETDEWEB)

    Moriyama, Hirotake; Moritani, Kimikazu [Kyoto Univ. (Japan)

    1998-03-01

    The irradiation effects in solid breeder materials are important for the performance assessment of fusion reactor blanket systems. For a clearer understanding of such effects, we have studied the production behavior of irradiation defects in some lithium ceramics by an in-situ luminescence measurement technique under ion beam irradiation. The luminescence spectra were measured at different temperatures, and the temperature-transient behaviors of luminescence intensity were also measured. The production mechanisms of irradiation defects were discussed on the basis of the observations. (author)

  5. Helium-cooled molten-salt fusion breeder

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.; Lee, J.D.; Fulton, F.J.; Huegel, F.; Neef, W.S. Jr.; Sherwood, A.E.; Berwald, D.H.; Whitley, R.H.; Wong, C.P.C.; Devan, J.H.

    1984-12-01

    We present a new conceptual design for a fusion reactor blanket that is intended to produce fissile material for fission power plants. Fast fission is suppressed by using beryllium instead of uranium to multiply neutrons. Thermal fission is suppressed by minimizing the fissile inventory. The molten-salt breeding medium (LiF + BeF/sub 2/ + ThF/sub 4/) is circulated through the blanket and to the on-line processing system where /sup 233/U and tritium are continuously removed. Helium cools the blanket and the austenitic steel tubes that contain the molten salt. Austenitic steel was chosen because of its ease of fabrication, adequate radiation-damage lifetime, and low corrosion by molten salt. We estimate that a breeder having 3000 MW of fusion power will produce 6500 kg of /sup 233/U per year. This amount is enough to provide makeup for 20 GWe of light-water reactors per year or twice that many high-temperature gas-cooled reactors or Canadian heavy-water reactors. Safety is enhanced because the afterheat is low and blanket materials do not react with air or water. The fusion breeder based on a pre-MARS tandem mirror is estimated to cost $4.9B or 2.35 times a light-water reactor of the same power. The estimated cost of the /sup 233/U produced is $40/g for fusion plants costing 2.35 times that of a light-water reactor if utility owned or $16/g if government owned.

  6. Feasibility study of a neutron activation system for EU test blanket systems

    Energy Technology Data Exchange (ETDEWEB)

    Tian, Kuo, E-mail: kuo.tian@kit.edu [Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Calderoni, Pattrick [Fusion for Energy(F4E), Barcelona (Spain); Ghidersa, Bradut-Eugen; Klix, Axel [Institute for Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany)

    2016-11-01

    Highlights: • This paper summarizes the technical baseline and preliminary design of EU TBM Neutron Activation System, briefly describes the key components, and outlines the major integration challenges. - Abstract: The Neutron Activation System (NAS) for the EU Helium Cooled Lithium Lead (HCLL) and Helium Cooled Pebble Bed (HCPB) Test Blanket Systems (TBSs) is an instrument that is proposed to determine the absolute neutron fluence and absolute neutron flux with information on the neutron spectrum in selected positions of the corresponding Test Blanket Modules (TBMs). In the NAS activation probes are exposed to the ITER neutron flux for periods ranging from several tens of seconds up to a full plasma pulse length, and the induced gamma activities are subsequently measured. The NAS is composed of a pneumatic transfer system and a counting station. The pneumatic transfer system includes irradiation ends in TBMs, transfer pipes, return gas pipes, a transfer station with a distributor (carousel), and a pressurized gas driving system, while the counting station consists of gamma ray detectors, signal processing electronic devices, and data analyzing software for neutron source strength evaluation. In this paper, a brief description on the proposed TBM NAS as well as the key components is presented, and the integration challenges of TBM NAS are outlined.

  7. Experimental Investigation of Ternary Alloys for Fusion Breeding Blankets

    Energy Technology Data Exchange (ETDEWEB)

    Choi, B. William [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chiu, Ing L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-10-26

    Future fusion power plants based on the deuterium-tritium (DT) fuel cycle will be required to breed the T fuel via neutron reactions with lithium, which will be incorporated in a breeding blanket that surrounds the fusion source. Recent work by LLNL proposed the used of liquid Li as the breeder in an inertial fusion energy (IFE) power plant. Subsequently, an LDRD was initiated to develop alternatives ternary alloy liquid metal breeders that have reduced chemical reactivity with water and air compared to pure Li. Part of the work plan was to experimentally investigate the phase diagrams of ternary alloys. Of particular interest was measurement of the melt temperature, which must be low enough to be compatible with the temperature limits of the steel used in the construction of the chamber and heat transfer system.

  8. An Analysis of Ripple and Error Fields Induced by a Blanket in the CFETR

    Science.gov (United States)

    Yu, Guanying; Liu, Xufeng; Liu, Songlin

    2016-10-01

    The Chinese Fusion Engineering Tokamak Reactor (CFETR) is an important intermediate device between ITER and DEMO. The Water Cooled Ceramic Breeder (WCCB) blanket whose structural material is mainly made of Reduced Activation Ferritic/Martensitic (RAFM) steel, is one of the candidate conceptual blanket design. An analysis of ripple and error field induced by RAFM steel in WCCB is evaluated with the method of static magnetic analysis in the ANSYS code. Significant additional magnetic field is produced by blanket and it leads to an increased ripple field. Maximum ripple along the separatrix line reaches 0.53% which is higher than 0.5% of the acceptable design value. Simultaneously, one blanket module is taken out for heating purpose and the resulting error field is calculated to be seriously against the requirement. supported by National Natural Science Foundation of China (No. 11175207) and the National Magnetic Confinement Fusion Program of China (No. 2013GB108004)

  9. Cyclic purging for low-temperature solid fusion reactor blanket operation

    Energy Technology Data Exchange (ETDEWEB)

    Was, G.S.; Lidsky, L.M.

    1979-05-01

    A purging process was developed that will permit operation of fusion reactor blankets employing solid LiAlO/sub 2/ as the breeder material at fuel temperatures of <600/sup 0/C. The low fuel temperature would greatly reduce the problems of fuel sintering, densification, and volume expansion that occur at fuel temperatures in excess of 900/sup 0/C without degrading the plant thermal efficiency. The process consists of heating the blanket to a specified temperature for a given time at regular intervals to release tritium held up in the breeding material. As an example, a detailed purging cycle was developed for the breeder rod shim rod blanket that uses LiAlO/sub 2/ in the form of micronsize particles compacted into millimeter-size pellets and is designed for low-temperature operation. Tritium inventory, doubling time, purging time, purging temperature, purging frequency, and particle size are the parameters used to evaluate the process. Calculations indicate that breeder particle sizes ranging from 20 to 50 ..mu..m and purging temperatures ranging from 600 to 700/sup 0/C can result in purge times of <1 h with three or more weeks between purges, and a doubling time of 7 yr for a blanket inventory limit of 5 kg and a breeding ratio of <1.02.

  10. Comparative studies for two different orientations of pebble bed in an HCCB blanket

    Science.gov (United States)

    Paritosh, CHAUDHURI; Chandan, DANANI; E, RAJENDRAKUMAR

    2017-12-01

    The Indian Test Blanket Module (TBM) program in ITER is one of the major steps in its fusion reactor program towards DEMO and the future fusion power reactor vision. Research and development (R&D) is focused on two types of breeding blanket concepts: lead–lithium ceramic breeder (LLCB) and helium-cooled ceramic breeder (HCCB) blanket systems for the DEMO reactor. As part of the ITER-TBM program, the LLCB concept will be tested in one-half of ITER port no. 2, whose materials and technologies will be tested during ITER operation. The HCCB concept is a variant of the solid breeder blanket, which is presently part of our domestic R&D program for DEMO relevant technology development. In the HCCB concept Li2TiO3 and beryllium are used as the tritium breeder and neutron multiplier, respectively, in the form of a packed bed having edge-on configuration with reduced activation ferritic martensitic steel as the structural material. In this paper two design schemes, mainly two different orientations of pebble beds, are discussed. In the current concept (case-1), the ceramic breeder beds are kept horizontal in the toroidal–radial direction. Due to gravity, the pebbles may settle down at the bottom and create a finite gap between the pebbles and the top cooling plate, which will affect the heat transfer between them. In the alternate design concept (case-2), the pebble bed is vertically (poloidal–radial) orientated where the side plates act as cooling plates instead of top and bottom plates. These two design variants are analyzed analytically and 2D thermal-hydraulic simulation studies are carried out with ANSYS, using the heat loads obtained from neutronic calculations. Based on the analysis the performance is compared and details of the thermal and radiative heat transfer studies are also discussed in this paper.

  11. Blanket comparison and selection study. Final report. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1984-09-01

    The study focused on: (1) Development of reference design guidelines, evaluation criteria, and a methodology for evaluating and ranking candidate blanket concepts. (2) Compilation of the required data base and development of a uniform systems analysis for comparison. (3) Development of conceptual designs for the comparative evaluation. (4) Evaluation of leading concepts for engineering feasibility, economic performance, and safety. (5) Identification and prioritization of R and D requirements for the leading blanket concepts. Sixteen concepts (nine TMR and seven tokamak) which were identified as leading candidates in the early phases of the study, were evaluated in detail. The overall evaluation concluded that the following concepts should provide the focus for the blanket R and D program: (Breeder/Coolant/Structure), Lithium/Lithium/Vanadium Alloy, Li/sub 2/O/Helium/Ferritic Steel, LiPb Alloy/LiPb Alloy/Vanadium Alloy, and Lithium/Helium/Ferritic Steel. The primary R and D issues for the Li/Li/V concept are the development of an advanced structural alloy, resolution of MHD and corrosion problems, provision for an inert atmosphere (e.g., N/sub 2/) in the reactor building, and the development of non-water cooled near-plasma components, particularly for the tokamak. The main issues for the LiPb/LiPb/V concepts are similar to the Li/Li/V blanket with the addition of resolving the tritium recovery issue. The R and D issues for Li/sub 2/O/He/FS concept include resolution of the tritium recovery/containment issue, achieving adequate tritium breeding and resolving other solid breeder issues such as swelling and fabrication concerns. Major concerns for the Li/He/FS concept are related to its rather poor economic performance. Improvement of its economic performance will be somewhat concept-dependent and will be more of a systems engineering issue.

  12. Tritium transport modeling at system level for the EUROfusion dual coolant lithium-lead breeding blanket

    Science.gov (United States)

    Urgorri, F. R.; Moreno, C.; Carella, E.; Rapisarda, D.; Fernández-Berceruelo, I.; Palermo, I.; Ibarra, A.

    2017-11-01

    The dual coolant lithium lead (DCLL) breeding blanket is one of the four breeder blanket concepts under consideration within the framework of EUROfusion consortium activities. The aim of this work is to develop a model that can dynamically track tritium concentrations and fluxes along each part of the DCLL blanket and the ancillary systems associated to it at any time. Because of tritium nature, the phenomena of diffusion, dissociation, recombination and solubilisation have been modeled in order to describe the interaction between the lead-lithium channels, the structural material, the flow channel inserts and the helium channels that are present in the breeding blanket. Results have been obtained for a pulsed generation scenario for DEMO. The tritium inventory in different parts of the blanket, the permeation rates from the breeder to the secondary coolant and the amount of tritium extracted from the lead-lithium loop have been computed. Results present an oscillating behavior around mean values. The obtained average permeation rate from the liquid metal to the helium is 1.66 mg h-1 while the mean tritium inventory in the whole system is 417 mg. Besides the reference case results, parametric studies of the lead-lithium mass flow rate, the tritium extraction efficiency and the tritium solubility in lead-lithium have been performed showing the reaction of the system to the variation of these parameters.

  13. Neutronic analyses of the preliminary design of a DCLL blanket for the EUROfusion DEMO power plant

    Energy Technology Data Exchange (ETDEWEB)

    Palermo, Iole, E-mail: iole.palermo@ciemat.es; Fernández, Iván; Rapisarda, David; Ibarra, Angel

    2016-11-01

    Highlights: • We perform neutronic calculations for the preliminary DCLL Blanket design. • We study the tritium breeding capability of the reactor. • We determine the nuclear heating in the main components. • We verify if the shielding of the TF coil is maintained. - Abstract: In the frame of the newly established EUROfusion WPBB Project for the period 2014–2018, four breeding blanket options are being investigated to be used in the fusion power demonstration plant DEMO. CIEMAT is leading the development of the conceptual design of the Dual Coolant Lithium Lead, DCLL, breeding blanket. The primary role of the blanket is of energy extraction, tritium production, and radiation shielding. With this aim the DCLL uses LiPb as primary coolant, tritium breeder and neutron multiplier and Eurofer as structural material. Focusing on the achievement of the fundamental neutronic responses a preliminary blanket model has been designed. Thus detailed 3D neutronic models of the whole blanket modules have been generated, arranged in a specific DCLL segmentation and integrated in the generic DEMO model. The initial design has been studied to demonstrate its viability. Thus, the neutronic behaviour of the blanket and of the shield systems in terms of tritium breeding capabilities, power generation and shielding efficiency has been assessed in this paper. The results demonstrate that the primary nuclear performances are already satisfactory at this preliminary stage of the design, having obtained the tritium self-sufficiency and an adequate shielding.

  14. Final analysis of the GCFR radial blanket and shield integral experiment

    Energy Technology Data Exchange (ETDEWEB)

    Ingersoll, D.T.; Williams, L.R.

    1981-04-01

    An integral experiment has been performed for verification of radiation transport methods and nuclear data used in the design of the radial shield for the proposed gas-cooled fast breeder reactor demonstration plant. The experiment was conducted at the ORNL Tower Shielding Facility and consisted of integral and spectral measurements of the neutron and gamma-ray flux transmitted through slabs of materials which modeled a GCFR-type radial blanket and radial shield. Both UO/sub 2/ and ThO/sub 2/ blankets were investigated as well as several shield designs comprising stainless steel, graphite, and boronated graphite.

  15. Analysis of tritium behaviour and recovery from a water-cooled Pb17Li blanket

    Energy Technology Data Exchange (ETDEWEB)

    Malara, C. [Institute Regional des Materiaux Avances, Ispra (Italy); Casini, G. [Systems Engineering and Informatics Institute, JRC Ispra, Ispra (Vatican City State, Holy See) (Italy); Viola, A. [Department of Chemical Engineering, University of Cagliari, Cagliari (Italy)

    1995-03-01

    The question of the tritium recovery in water-cooled Pb17Li blankets has been under investigation for several years at JRC Ispra. The method which has been more extensively analysed is that of slowly circulating the breeder out from the blanket units and of extracting the tritium from it outside the plasma vacuum vessel by helium gas purging or vacuum degassing in a suited process apparatus. A computerized model of the tritium behaviour in the blanket units and in the extraction system was developed. It includes four submodels: (1) tritium permeation process from the breeder to the cooling water as a function of the local operative conditions (tritium concentration in Pb17Li, breeder temperature and flow rate); (2) tritium mass balance in each breeding unit; (3) tritium desorption from the breeder material to the gas phase of the extraction system; (4) tritium extraction efficiency as a function of the design parameters of the recovery apparatus. In the present paper, on the basis of this model, a parametric study of the tritium permeation rate in the cooling water and of the tritium inventory in the blanket is carried out. Results are reported and discussed in terms of dimensionless groups which describe the relative effects of the overall resistance on tritium transfer to the cooling water (with and without permeation barriers), circulating Pb17Li flow rate and extraction efficiency of the tritium recovery unit. The parametric study is extended to the recovery unit in the case of tritium extraction by helium purge or vacuum degassing in a droplet spray unit. (orig.).

  16. Neutronic investigation and activation calculation for CFETR HCCB blankets

    Science.gov (United States)

    Shuling, XU; Mingzhun, LEI; Sumei, LIU; Kun, LU; Kun, XU; Kun, PEI

    2017-12-01

    The neutronic calculations and activation behavior of the proposed helium cooled ceramic breeder (HCCB) blanket were predicted for the Chinese Fusion Engineering Testing Reactor (CFETR) design model using the MCNP multi-particle transport code and its associated data library. The tritium self-sufficiency behavior of the HCCB blanket was assessed, addressing several important breeding-related arrangements inside the blankets. Two candidate first wall armor materials were considered to obtain a proper tritium breeding ratio (TBR). Presentations of other neutronic characteristics, including neutron flux, neutron-induced damages in terms of the accumulated dpa and helium production were also conducted. Activation, decay heat levels and contact dose rates of the components were calculated to estimate the neutron-induced radioactivity and personnel safety. The results indicate that neutron radiation is efficiently attenuated and slowed down by components placed between the plasma and toroidal field coil. The dominant nuclides and corresponding isotopes in the structural steel were discussed. A radioactivity comparison between pure beryllium and beryllium with specific impurities was also performed. After a millennium cooling time, the decay heat of all the concerned components and materials is less than 1 × 10‑4 kW, and most associated in-vessel components qualify for recycling by remote handling. The results demonstrate that acceptable hands-on recycling and operation still require a further long waiting period to allow the activated products to decay.

  17. Using one hybrid 3D-1D-3D approach for the conceptual design of WCCB blanket for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Kecheng; Zhang, Xiaokang [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Li, Jia [University of Science and Technology of China, Hefei, Anhui, 230027 (China); Ma, Xuebin [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Liu, Songlin, E-mail: slliu@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China)

    2017-01-15

    Highlights: • The Hybrid 3D-1D-3D approach is used for radial building design of WCCB. • Nuclear heat obtained by this method agrees well with 3D neutronics results. • The final results of temperature and TBR satisfy with the requirements. • All the results show that this approach is high efficiency and high reliability. - Abstract: A hybrid 3D-1D-3D approach is proposed for the conceptual design of a blanket. Firstly, the neutron wall loading (NWL) of each blanket module is obtained through a neutronics calculation employing a 3D model, which contains the geometry outline of in-vacuum vessel components and the exact neutron source distribution. Secondly, a 1D cylindrical model with the blanket module containing a detailed radial building is adopted for the neutronics analysis, with the aim of calculating the tritium breeding ratio (TBR) and nuclear heating. Being normalized to the NWL, the nuclear heating is transferred to a 2D model for thermal-hydraulics analysis using the FLUENT code. Through a series analysis of nuclear-thermal iterations that considers the tritium breeding ratio (TBR) and thermal performance as optimization objectives, the optimized radial building of each module surrounding plasma can be obtained. Thirdly, the 3D structural design of each module is established by adding side walls, cover plates, stiffening plates, and other components based on the radial building. The 3D neutronics and thermal-hydraulics using the detailed blanket modules are re-analyzed. This approach has been successfully applied to the design of a water-cooled ceramic breeder blanket for the Chinese Fusion Engineering Test Reactor (CFETR). The radial building of each blanket module surrounding plasma is optimized. The global tritium breeding ratio (TBR) calculated by the 3D neutronics analysis is 1.21, and the temperature of all materials in the 3D blanket structure is below the upper limits. As indicated by the comparison of the 1D and 3D neutronics and thermal

  18. Further neutronic analyses of the European ceramic B.I.T. blanket for Demo

    Energy Technology Data Exchange (ETDEWEB)

    Giancarli, L.; Diop, C. [CEA Centre d`Etudes de Saclay, 91 - Gif-sur-Yvette (France). Dept. de Mecanique et de Technologie; Petrizzi, L.; Rado, V. [ENEA, Frascati (Italy). Centro Ricerche Energia

    1992-12-31

    The present study concerns the most recent neutronic analyses of two design versions of the european ceramic B.I.T. blanket, jointly developed by ENEA and CEA since few years. The last year developments required a new 3-D geometry evaluations of the global TBR (Tritium Breeding Ratio). The results indicated that the ENEA version reaches a global TBR value of 1.13. The CEA version, in a 3-D model using a simplified description of the breeder module layout, reaches a TBR value of 1.12. Nuclear heat deposition density has been determined for all blanket components as a function of the poloidal co-ordinate. Shielding properties of this type of blanket have been analyzed.

  19. Interim Report on Fluid-Fuel Thermal Breeder Reactors

    Energy Technology Data Exchange (ETDEWEB)

    MacPherson, H. G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Alexander, L. G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Carter, W. L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chapman, R. H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kinyon, B. W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Miller, J. W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    1960-03-15

    The merits of aqueous-homogeneous {AHBR), graphite-moderated molten salt (MSBR) , and graphite-moderated liquid-bismuth (LBBR) breeder reactors operated at nearly comparable fuel-cycle costs (~1.5 mills/kwhr) were evaluated. The net electrical plant capability was assumed to be 1000 MwE, and the fuel and fertile streams were processed continuously on-site. The specific powers based on fuel were 1.2, 1.2, and 0.5 MwE/kg respectively, and 5.9, 3.7, and 5.3 MwE/tonne based on thorium. Net breeding ratios were 1.10, 1.07, and 1.07, giving doubling times of 5-1/2, 11, and 25 full power years . The fuel-cycle costs at the design points selected were 1.4, 1.3, and 1.6 mills/kwhr . The AHBR has an advantage in breeding ratio and doubling time because D2O is superior to graphite as a moderator in breeder reactors. MSBR has an advantage in fuel-cycle costs and in inventory of uranium in the fertile stream as a result of using a solution blanket.

  20. Neutronics and thermo-hydraulic design of supercritical-water cooled solid breeder TBM

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Jie; Wu, Yingwei, E-mail: wyw810@mail.xjtu.edu.cn; Tian, Wenxi; Su, Guanghui; Qiu, Suizheng

    2015-03-15

    Highlights: • A supercritical-water cooled solid breeder test blanket module (SWCB TBM) was designed. • The neutronics calculations show that the tritium breeding ratio (TBR) of SWCB TBM is 1.17. • The outlet temperature of SWCB TBM can reach as high as 500 °C. • Both thermal stress and deformation of the SWCB TBM design are within safety limits. - Abstract: In this paper, the supercritical-water cooled solid breeder test blanket module (SWCB TBM), using the supercritical water as the coolant, Li{sub 4}SiO{sub 4} lithium ceramic pebbles as a breeder, and beryllium pebbles as a neutron multiplier, was designed and analyzed for ITER. The results of neutronics, thermo-hydraulic and thermo-mechanical analysis are presented for the SWCB TBM. Neutronics calculations show that the proposed TBM has high tritium breeding ratio and power density. The tritium breeding ratio (TBR) of the proposed design is 1.17, which is greater than that of 1.15 required for tritium self-sufficiency. The thermo-hydraulic calculation proved that the TBM components can be effectively cooled to the allowable temperature with the temperature of outlet reaching 500 °C. According to thermo-mechanics calculation results, the first wall with the width of 17 mm is safe and the deformation of first wall is far below the limited value. All the results showed that the current TBM design was reasonable under the ITER normal condition.

  1. Fusion Blanket Coolant Section Criteria, Methodology, and Results

    Energy Technology Data Exchange (ETDEWEB)

    DeMuth, J. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meier, W. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Jolodosky, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Frantoni, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reyes, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-10-02

    The focus of this LDRD was to explore potential Li alloys that would meet the tritium breeding and blanket cooling requirements but with reduced chemical reactivity, while maintaining the other attractive features of pure Li breeder/coolant. In other fusion approaches (magnetic fusion energy or MFE), 17Li- 83Pb alloy is used leveraging Pb’s ability to maintain high TBR while lowering the levels of lithium in the system. Unfortunately this alloy has a number of potential draw-backs. Due to the high Pb content, this alloy suffers from very high average density, low tritium solubility, low system energy, and produces undesirable activation products in particular polonium. The criteria considered in the selection of a tritium breeding alloy are described in the following section.

  2. Shutdown dose rate analysis of European test blanket modules shields in ITER Equatorial Port #16

    Energy Technology Data Exchange (ETDEWEB)

    Juárez, Rafael, E-mail: rjuarez@ind.uned.es [Departamento de Ingeniería Energética, ETSII-UNED, Calle Juan del Rosal 12, Madrid 28040 (Spain); Sauvan, Patrick; Perez, Lucia [Departamento de Ingeniería Energética, ETSII-UNED, Calle Juan del Rosal 12, Madrid 28040 (Spain); Panayotov, Dobromir; Vallory, Joelle; Zmitko, Milan; Poitevin, Yves [Fusion for Energy (F4E), Torres Diagonal Litoral B3, Josep Pla 2, Barcelona 08019 (Spain); Sanz, Javier [Departamento de Ingeniería Energética, ETSII-UNED, Calle Juan del Rosal 12, Madrid 28040 (Spain)

    2016-11-01

    Highlights: • Nuclear analysis for European TBMs and shields, in ITER Equatorial Port #16, has been conducted in support of the ‘Concept Design Review’ from ITER. • The objective of the work is the characterization of the Shutdown Dose Rates at Equatorial Port #16 interspace. • The role played by the TBM and TBM shields, the equatorial port gaps and the vacuum vessel permeation, in terms of neutron flux transmission is assessed. • The role played by the TBM, TBM shields, Port Plug Frame, Pipe Forest and the machine in terms of activation is also investigated. - Abstract: ‘Fusion for Energy’ (F4E) is designing, developing, and implementing the European Helium-Cooled Lead-Lithium (HCLL) and Helium-Cooled Pebble-Bed (HCPB) Test Blanket Systems (TBSs) for ITER (Nuclear Facility INB-174). An essential element of the Conceptual Design Review (CDR) of these TBSs is the demonstration of capability of Test Blanket Modules (TBM) and their shields to fulfil their function and comply with the design requirements. One of the TBM shields highly relevant design aspects is the project target for shutdown dose rates (SDDR) in the interspace. We investigated two functions of the TBMs and TBM shields—the neutron flux attenuation along the shields, and the reduction of the activation of the components contributing to SDDR. It is shown that TBMs and TBM shields reduce significantly the neutron flux in the port plug (PP). In terms of neutron flux attenuation, the TBM shield provides sufficient neutron flux reduction, being responsible for 5 × 10{sup 6} n/cm{sup 2} s at port interspace, while the EPP gaps and BSM gaps are responsible for 5 × 10{sup 7} n/cm{sup 2} s each. When considering closed upper, lower and lateral neighbour equatorial ports (thus, excluding the cross-talk between ports), a SDDR of 121 μSv/h averaged near the port closure flange was obtained, out of which, only 4 μSv/h are due to the activation of TBMs and TBM shields. Maximum SDDR in the range

  3. Uranium self-shielding in fast reactor blankets

    Energy Technology Data Exchange (ETDEWEB)

    Kadiroglu, O.K.; Driscoll, M.J.

    1976-03-01

    The effects of heterogeneity on resonance self-shielding are examined with particular emphasis on the blanket region of the fast breeder reactor and on its dominant reaction--capture in /sup 238/U. The results, however, apply equally well to scattering resonances, to other isotopes (fertile, fissile and structural species) and to other environments, so long as the underlying assumptions of narrow resonance theory apply. The heterogeneous resonance integral is first cast into a modified homogeneous form involving the ratio of coolant-to-fuel fluxes. A generalized correlation (useful in its own right in many other applications) is developed for this ratio, using both integral transport and collision probability theory to infer the form of correlation, and then relying upon Monte Carlo calculations to establish absolute values of the correlation coefficients. It is shown that a simple linear prescription can be developed for the flux ratio as a function of only fuel optical thickness and the fraction of the slowing-down source generated by the coolant. This in turn permitted derivation of a new equivalence theorem relating the heterogeneous self-shielding factor to the homogeneous self-shielding factor at a modified value of the background scattering cross section per absorber nucleus. A simple version of this relation is developed and used to show that heterogeneity has a negligible effect on the calculated blanket breeding ratio in fast reactors.

  4. Thermal breeder fuel enrichment zoning

    Science.gov (United States)

    Capossela, Harry J.; Dwyer, Joseph R.; Luce, Robert G.; McCoy, Daniel F.; Merriman, Floyd C.

    1992-01-01

    A method and apparatus for improving the performance of a thermal breeder reactor having regions of higher than average moderator concentration are disclosed. The fuel modules of the reactor core contain at least two different types of fuel elements, a high enrichment fuel element and a low enrichment fuel element. The two types of fuel elements are arranged in the fuel module with the low enrichment fuel elements located between the high moderator regions and the high enrichment fuel elements. Preferably, shim rods made of a fertile material are provided in selective regions for controlling the reactivity of the reactor by movement of the shim rods into and out of the reactor core. The moderation of neutrons adjacent the high enrichment fuel elements is preferably minimized as by reducing the spacing of the high enrichment fuel elements and/or using a moderator having a reduced moderating effect.

  5. Preliminary neutronics design of the dual-cooled lithium lead blanket for Fads-II

    Energy Technology Data Exchange (ETDEWEB)

    Li Jingjing [Institute of Plasma Physics, Chinese Academy of Sciences, P.O. Box 1126, Hefei, Anhui 230031 (China)]. E-mail: jjli@ipp.ac.cn; Zheng Shanliang [Institute of Plasma Physics, Chinese Academy of Sciences, P.O. Box 1126, Hefei, Anhui 230031 (China); Zeng Qin [Institute of Plasma Physics, Chinese Academy of Sciences, P.O. Box 1126, Hefei, Anhui 230031 (China); Xu, Dezheng [Institute of Plasma Physics, Chinese Academy of Sciences, P.O. Box 1126, Hefei, Anhui 230031 (China); Liu, Haibo [Institute of Plasma Physics, Chinese Academy of Sciences, P.O. Box 1126, Hefei, Anhui 230031 (China)

    2005-11-15

    The dual-cooled lithium lead (DLL) blanket of the fusion power reactor named Fads-II is dual-cooled by helium gas and lithium lead (Li Pb) eutectic which is also served as tritium breeder. The Reduced Activation Ferritic/Martensitic steel is selected as the main structure material. Preliminary neutronics optimization analysis was performed for the DLL blanket by using the home-developed multi-functional (transport/burnup/optimization) code system Valuable's.0 with its multi-group data library Haldane.0/Mg. The calculated results are presented and discussed with comparison to the results calculated by the code MCNP4C with the IAEA data library FENDL-2/MC.

  6. Isotope exchange reactions on ceramic breeder materials and their effect on tritium inventory

    Energy Technology Data Exchange (ETDEWEB)

    Nishikawa, M.; Baba, A. [Kyushu Univ., Fukuoka (Japan). Faculty of Engineering; Kawamura, Y.; Nishi, M.

    1998-03-01

    Though lithium ceramic materials such as Li{sub 2}O, LiAlO{sub 2}, Li{sub 2}ZrO{sub 3}, Li{sub 2}TiO{sub 3} and Li{sub 4}SiO{sub 4} are considered as breeding materials in the blanket of a D-T fusion reactor, the release behavior of the bred tritium in these solid breeder materials has not been fully understood. The isotope exchange reaction rate between hydrogen isotopes in the purge gas and tritium on the surface of breeding materials have not been quantified yet, although helium gas with hydrogen or deuterium is planned to be used as the blanket purge gas in the recent blanket designs. The mass transfer coefficient representing the isotope exchange reaction between H{sub 2} and D{sub 2}O or that between D{sub 2} and H{sub 2}O in the ceramic breeding materials bed is experimentally obtained in this study. Effects of isotope exchange reactions on the tritium inventory in the bleeding blanket is discussed based on data obtained in this study where effects of diffusion of tritium in the grain, absorption of water in the bulk of grain, and adsorption of water on the surface of grain, together with two types of isotope exchange reactions are considered. The way to estimate the tritium inventory in a Li{sub 2}ZrO{sub 3} blanket used in this study shows a good agreement with data obtained in such in-situ experiments as MOZART, EXOTIC-5, 6 and TRINE experiments. (author)

  7. Status on DEMO Helium Cooled Lithium Lead breeding blanket thermo-mechanical analyses

    Energy Technology Data Exchange (ETDEWEB)

    Aubert, J., E-mail: julien.aubert@cea.fr [CEA-Saclay, DEN, DM2S, F-91191 Gif-sur-Yvette (France); Aiello, G.; Jaboulay, J.-C. [CEA-Saclay, DEN, DM2S, F-91191 Gif-sur-Yvette (France); Kiss, B. [Institute of Nuclear Techniques, Budapest University of Technology and Economics, Budapest (Hungary); Morin, A. [CEA-Saclay, DEN, DM2S, F-91191 Gif-sur-Yvette (France)

    2016-11-01

    Highlights: • CEA with the support of Wigner-RCP and IPP-CR, is in charge of the design of the HCLL blanket for DEMO. The DEMO HCLL breeding blanket design capitalizes on the experience acquired on the HCLL Test Blanket Module designed for ITER. Design improvements are being implemented to adapt the design to DEMO specifications and performance objectives. • Thermal and mechanical analyses have been carried out in order to justify the design of the HCLL breeding blanket showing promising results for tie rods modules’ attachments system and relatively good behavior of the box in case of LOCA when comparing to RCC-MRx criteria. • CFD thermal analyses on generic breeding unit have enabled the consolidation of the results obtained with previous FEM design analyses. - Abstract: The EUROfusion Consortium develops a design of a fusion power demonstrator (DEMO) in the framework of the European “Horizon 2020” innovation and research program. One of the key components in the fusion reactor is the breeding blanket surrounding the plasma, ensuring tritium self-sufficiency, heat removal for conversion into electricity, and neutron shielding. The Helium Cooled Lithium Lead (HCLL) blanket is one of the concepts which is investigated for DEMO. It is made of a Eurofer structure and uses the eutectic liquid lithium–lead as tritium breeder and neutron multiplier, and helium gas as coolant. Within the EUROfusion organization, CEA with the support of Wigner-RCP and IPP-CR, is in charge of the design of the HCLL blanket for DEMO. This paper presents the status of the thermal and mechanical analyses carried out on the HCLL breeding blanket in order to justify the design. CFD thermal analyses on generic breeding unit including stiffening plates and cooling plates have been performed with ANSYS in order to consolidate results obtained with previous FEM design analyses. Moreover in order to expand the justification of the HCLL Breeding blanket design, the most loaded area of

  8. Comparison of early socialization practices used for litters of small-scale registered dog breeders and nonregistered dog breeders.

    Science.gov (United States)

    Korbelik, Juraj; Rand, Jacquie S; Morton, John M

    2011-10-15

    OBJECTIVE-To compare early socialization practices between litters of breeders registered with the Canine Control Council (CCC) and litters of nonregistered breeders advertising puppies for sale in a local newspaper. DESIGN-Retrospective cohort study. Animals-80 litters of purebred and mixed-breed dogs from registered (n = 40) and non-registered (40) breeders. PROCEDURES-Registered breeders were randomly selected from the CCC website, and nonregistered breeders were randomly selected from a weekly advertising newspaper. The litter sold most recently by each breeder was then enrolled in the study. Information pertaining to socialization practices for each litter was obtained through a questionnaire administered over the telephone. RESULTS-Registered breeders generally had more breeding bitches and had more litters than did nonregistered breeders. Litters of registered breeders were more likely to have been socialized with adult dogs, people of different appearances, and various environmental stimuli, compared with litters of nonregistered breeders. Litters from registered breeders were also much less likely to have been the result of an unplanned pregnancy. CONCLUSIONS AND CLINICAL RELEVANCE-Among those breeders represented, litters of registered breeders received more socialization experience, compared with litters of nonregistered breeders. People purchasing puppies from nonregistered breeders should focus on socializing their puppies between the time of purchase and 14 weeks of age. Additional research is required to determine whether puppies from nonregistered breeders are at increased risk of behavioral problems and are therefore more likely to be relinquished to animal shelters or euthanized, relative to puppies from registered breeders.

  9. Design requirement on HYPER blanket fuel assembly

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Woan; Lee, B. O.; Nam, C.; Ryu, W. S.; Lee, B. S.; Park, W. S

    2000-07-01

    This document describes design requirements which are needed for designing the blanket assembly of the HYPER as design guidance. The blanket assembly of the HYPER consists of blanket fuel rods, mounting rail, spacer, upper nozzle with handling socket, bottom nozzle with mounting rail and skeleton structure. The blanket fuel rod consists of top end plug, bottom end plug with key way, blanket fuel slug, and cladding. In the assembly, the rods are in a triangular pitch array. This report contains functional requirements, performance and operational requirements, interfacing systems requirements, core restraint and interface requirements, design limits and strength requirements, system configuration and essential feature requirements, seismic requirements, structural requirements, environmental requirements, reliability and safety requirements, standard and codes, QA programs, and other requirements for the blanket fuel assembly of the HYPER.

  10. Practitioners'--breeders' approach to canine parturition.

    Science.gov (United States)

    Freak, M J

    1975-04-05

    Both veterinary surgeon and dog breeder should be involved in assessing the whelping capability of brood bitches as one essential point in the selection of sound stock. Normal parturition is described in a manner that might be used in the instruction of breeders and nursing auxiliaries in midwifery. In its classical three stages, the mechanics and hydraulics are explained in simple terms and the hormonal changes discussed in relation to each stage. The type of co-operation desired between veterinary surgeon and breeder is discussed and the instruction to be given on the recognition of dystocia is outlined. Some commonly met dystocias are described. Simple digitally-assisted delivery by the midwife/breeder is described as are the forceps techniques which may be applied by the veterinary surgeon in the course of diagnosis and delivery.

  11. Major welfare issues in broiler breeders

    NARCIS (Netherlands)

    Jong, de I.C.; Guemene, D.

    2011-01-01

    Under current practices, broiler parent stock (broiler breeders) encounter several welfare problems, such as feed restriction and injury during mating. Intensive selection for production traits, especially growth rate, is associated with increased nutritious requirement and thus feed consumption,

  12. Fusion reactor blanket/shield design study

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D.L.; Clemmer, R.G.; Harkness, S.D.

    1979-07-01

    A joint study of tokamak reactor first-wall/blanket/shield technology was conducted by Argonne National Laboratory (ANL) and McDonnell Douglas Astronautics Company (MDAC). The objectives of this program were the identification of key technological limitations for various tritium-breeding-blanket design concepts, establishment of a basis for assessment and comparison of the design features of each concept, and development of optimized blanket designs. The approach used involved a review of previously proposed blanket designs, analysis of critical technological problems and design features associated with each of the blanket concepts, and a detailed evaluation of the most tractable design concepts. Tritium-breeding-blanket concepts were evaluated according to the proposed coolant. The ANL effort concentrated on evaluation of lithium- and water-cooled blanket designs while the MDAC effort focused on helium- and molten salt-cooled designs. A joint effort was undertaken to provide a consistent set of materials property data used for analysis of all blanket concepts. Generalized nuclear analysis of the tritium breeding performance, an analysis of tritium breeding requirements, and a first-wall stress analysis were conducted as part of the study. The impact of coolant selection on the mechanical design of a tokamak reactor was evaluated. Reference blanket designs utilizing the four candidate coolants are presented.

  13. The compatibility of SiC/SiC composites with ceramic breeder materials

    Energy Technology Data Exchange (ETDEWEB)

    Sample, T. (Institute for Advanced Materials, Commission of the European Communities, Joint Research Centre, I-21020, Ispra (Vatican City State, Holy See) (Italy)); Fenici, P. (Institute for Advanced Materials, Commission of the European Communities, Joint Research Centre, I-21020, Ispra (Vatican City State, Holy See) (Italy)); Kolbe, H. (Institute for Advanced Materials, Commission of the European Communities, Joint Research Centre, I-21020, Ispra (Vatican City State, Holy See) (Italy)); Orecchia, L. (Institute for Advanced Materials, Commission of the European Communities, Joint Research Centre, I-21020, Ispra (Vatican City State, Holy See) (Italy))

    1994-09-01

    The compatibility of three lithium-containing ceramic breeder materials Li[sub 4]SiO[sub 4], Li[sub 2]ZrO[sub 3] and LiAlO[sub 2] with two industrially available SiC/SiC composites was determined. Simple capsule tests were carried out at 600 and 800 C in closed capsules, dynamic vacuum and flowing helium. All three breeder materials were reactive towards the SiO[sub 2] content of the SiC/SiC composites forming a surface layer of Li[sub 2]SiO[sub 3]. The as-received' Li[sub 4]SiO[sub 4] was found to be much more reactive than Li[sub 2]ZrO[sub 3] or LiAlO[sub 2]. However, the greater reactivity was found to be governed by the Li[sub 2]CO[sub 3] impurity content of the Li[sub 4]SiO[sub 4] granules. Removal of the Li[sub 2]CO[sub 3], through thermal decomposition under vacuum, reduced the extend of Li[sub 2]SiO[sub 3] formation. The reaction of the breeder materials to form Li[sub 2]SiO[sub 3] is briefly discussed in relation to the probable operating conditions for a SiC/SiC composite structural material in a blanket. ((orig.))

  14. Flibe blanket concept for transmuting transuranic elements and long lived fission products.

    Energy Technology Data Exchange (ETDEWEB)

    Gohar, Y.

    2000-11-15

    A Molten salt (Flibe) fusion blanket concept has been developed to solve the disposition problems of the spent nuclear fuel and the transuranic elements. This blanket concept can achieve the top rated solution, the complete elimination of the transuranic elements and the long-lived fission products. Small driven fusion devices with low neutron wall loading and low neutron fluence can perform this function. A 344-MW integrated fusion power from D-T plasmas for thirty years with an availability factor of 0.75 can dispose of 70,000 tons of the US inventory of spent nuclear fuel generated up to the year 2015. In addition, the utilization of this blanket concept eliminates the need for a geological repository site, which is a major advantage. This application provides an excellent opportunity to develop and to enhance the public acceptance of the fusion energy for the future. The energy from the transmutation process is utilized to produce revenue. Flibe, lithium-lead eutectic, and liquid lead are possible candidates. The liquid blankets have several features, which are suited for W application. It can operate at constant thermal power without interruption for refueling by adjusting the concentration of the transuranic elements and lithium-6. These liquids operate at low-pressure, which reduces the primary stresses in the structure material. Development and fabrication costs of solid transuranic materials are eliminated. Burnup limit of the transuranic elements due to radiation effects is eliminated. Heat is generated within the liquid, which simplifies the heat removal process without producing thermal stresses. These blanket concepts have large negative temperature coefficient with respect to the blanket reactivity, which enhances the safety performance. These liquids are chemically and thermally stable under irradiation conditions, which minimize the radioactive waste volume. The operational record of the Molten Salt Breeder Reactor with Flibe was very successful

  15. Development of a Flammability Test Method for Aircraft Blankets

    Science.gov (United States)

    1996-03-01

    Flammability testing of aircraft blankets was conducted in order to develop a fire performance test method and performance criteria for blankets supplied to commercial aircraft operators. Aircraft blankets were subjected to vertical Bunsen burner tes...

  16. Design and analysis of ITER shield blanket

    Energy Technology Data Exchange (ETDEWEB)

    Ohmori, Junji; Hatano, Toshihisa; Ezato, Kouichiro [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment] [and others

    1998-12-01

    This report includes electromagnetic analyses for ITER shielding blanket modules, fabrication methods for the blanket modules and the back plate, the design and the fabrication methods for port limiter have been investigated. Studies on the runaway electron impact for Be armor have been also performed. (J.P.N.)

  17. Classification Using Markov Blanket for Feature Selection

    DEFF Research Database (Denmark)

    Zeng, Yifeng; Luo, Jian

    2009-01-01

    Selecting relevant features is in demand when a large data set is of interest in a classification task. It produces a tractable number of features that are sufficient and possibly improve the classification performance. This paper studies a statistical method of Markov blanket induction algorithm...... induction as a feature selection method. In addition, we point out an important assumption behind the Markov blanket induction algorithm and show its effect on the classification performance....... for filtering features and then applies a classifier using the Markov blanket predictors. The Markov blanket contains a minimal subset of relevant features that yields optimal classification performance. We experimentally demonstrate the improved performance of several classifiers using a Markov blanket...

  18. Investigation of molten salt fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kubota, Kenichi; Enuma, Yasuhiro; Tanaka, Yoshihiko; Konomura, Mamoru; Ichimiya, Masakazu [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center

    2000-06-01

    Phase I of Feasibility Studies on Commercialized Fast Reactor System is being performed for two years from Japanese Fiscal Year 1999. In this report, results of the study on fluid fuel reactors (especially a molten salt fast breeder reactor concept) are described from the viewpoint of technical and economical concerns of the plant system design. In JFY1999, we have started to investigate the fluid fuel reactors as alternative concepts of sodium cooled FBR systems with MOX fuel, and selected the unique concept of a molten chloride fast breeder reactor, whose U-Pu fuel cycle can be related to both light water reactors and fast breeder reactors on the basis of present technical data and design experiences. We selected a preliminary composition of molten fuel and conceptual plant design through evaluation of technical and economical issues essential for the molten salt reactors and then compared them with reference design concepts of sodium cooled FBR systems under limited information on the molten chloride fast breeder reactors. The following results were obtained. (1) The molten chloride fast breeder reactors have inherent safety features in the core and plant performances, ad the fluid fuel is quite promising for cost reduction of the fuel fabrication and reprocessing. (2) On the other hand, the inventory of the molten chloride fuel becomes high and thermal conductivity of the coolant is inferior compared to those of sodium cooled FBR systems, then, the size of main components such as IHX's becomes larger and the amount of construction materials is seems to be increased. (3) Furthermore economical vessel and piping materials which contact with the molten chloride salts are required to be developed. From the results, it is concluded that further steps to investigate the molten chloride fast breeder reactor concepts are too early to be conducted. (author)

  19. Neutronics Comparison Analysis of the Water Cooled Ceramics Breeding Blanket for CFETR

    Science.gov (United States)

    Li, Jia; Zhang, Xiaokang; Gao, Fangfang; Pu, Yong

    2016-02-01

    China Fusion Engineering Test Reactor (CFETR) is an ITER-like fusion engineering test reactor that is intended to fill the scientific and technical gaps between ITER and DEMO. One of the main missions of CFETR is to achieve a tritium breeding ratio that is no less than 1.2 to ensure tritium self-sufficiency. A concept design for a water cooled ceramics breeding blanket (WCCB) is presented based on a scheme with the breeder and the multiplier located in separate panels for CFETR. Based on this concept, a one-dimensional (1D) radial built breeding blanket was first designed, and then several three-dimensional models were developed with various neutron source definitions and breeding blanket module arrangements based on the 1D radial build. A set of nuclear analyses have been carried out to compare the differences in neutronics characteristics given by different calculation models, addressing neutron wall loading (NWL), tritium breeding ratio (TBR), fast neutron flux on inboard side and nuclear heating deposition on main in-vessel components. The impact of differences in modeling on the nuclear performance has been analyzed and summarized regarding the WCCB concept design. supported by the National Special Project for Magnetic Confined Nuclear Fusion Energy (Nos. 2013GB108004, 2014GB122000, and 2014GB119000), and National Natural Science Foundation of China (No. 11175207)

  20. Advancement in tritium transport simulations for solid breeding blanket system

    Energy Technology Data Exchange (ETDEWEB)

    Ying, Alice, E-mail: ying@fusion.ucla.edu [Mechanical and Aerospace Engineering Department, UCLA, Los Angeles, CA 90095 (United States); Zhang, Hongjie [Mechanical and Aerospace Engineering Department, UCLA, Los Angeles, CA 90095 (United States); Merrill, Brad J. [Idaho National Laboratory, Idaho Falls, ID 83415 (United States); Ahn, Mu-Young [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2016-11-01

    In this paper, advancement on tritium transport simulations was demonstrated for a solid breeder blanket HCCR TBS, where multi-physics and detailed engineering descriptions are considered using a commercial simulation code. The physics involved includes compressible purge gas fluid flow, heat transfer, chemical reaction, isotope swamping effect, and tritium isotopes mass transport. The strategy adopted here is to develop numerical procedures and techniques that allow critical details of material, geometric and operational heterogeneity in a most complete engineering description of the TBS being incorporated into the simulation. Our application focuses on the transient assessment in view of ITER being pulsed operations. An immediate advantage is a more realistic predictive and design analysis tool accounting pulsed operations induced temperature variations which impact helium purge gas flow as well as Q{sub 2} composition concentration time and space evolutions in the breeding regions. This affords a more accurate prediction of tritium permeation into the He coolant by accounting correct temperature and partial pressure effects and realistic diffusion paths. The analysis also shows that by introducing by-pass line to accommodate ITER pulsed operations in the TES loop allows tritium extraction design being more cost effective.

  1. Helium-Cooled Refractory Alloys First Wall and Blanket Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Wong, C.P.C.; Nygren, R.E.; Baxi, C.B.; Fogarty, P.; Ghoniem, N.; Khater, H.; McCarthy, K.; Merrill, B.; Nelson, B.; Reis, E.E.; Sharafat, S.; Schleicher, R.; Sze, D.K.; Ulrickson, M.; Willms, S.; Youssef, M.; Zinkel, S.

    1999-08-01

    Under the APEX program the He-cooled system design task is to evaluate and recommend high power density refractory alloy first wall and blanket designs and to recommend and initiate tests to address critical issues. We completed the preliminary design of a helium-cooled, W-5Re alloy, lithium breeder design and the results are reported in this paper. Many areas of the design were assessed, including material selection, helium impurity control, and mechanical, nuclear and thermal hydraulics design, and waste disposal, tritium and safety design. System study results show that at a closed cycle gas turbine (CCGT) gross thermal efficiency of 57.5%, a superconducting coil tokamak reactor, with an aspect ratio of 4, and an output power of 2 GWe, can be projected to have a cost of electricity at 54.6 mill/kWh. Critical issues were identified and we plan to continue the design on some of the critical issues during the next phase of the APEX design study.

  2. Hydrogen permeation through Flinabe fluoride molten salts for blanket candidates

    Energy Technology Data Exchange (ETDEWEB)

    Nishiumi, Ryosuke, E-mail: r.nishiumi@aees.kyushu-u.ac.jp; Fukada, Satoshi; Nakamura, Akira; Katayama, Kazunari

    2016-11-01

    Highlights: • H{sub 2} diffusivity, solubility and permeability in Flinabe as T breeder are determined. • Effects in composition differences among Flibe, Fnabe and Flinabe are compared. • Changes of pressure dependence of Flinabe permeation rate are clarified. - Abstract: Fluoride molten salt Flibe (2LiF + BeF{sub 2}) is a promising candidate for the liquid blanket of a nuclear fusion reactor, because of its large advantages of tritium breeding ratio and heat-transfer fluid. Since its melting point is higher than other liquid candidates, another new fluoride molten salt Flinabe (LiF + NaF + BeF{sub 2}) is recently focused on because of its lower melting point while holding proper breeding properties. In this experiment, hydrogen permeation behavior through the three molten salts of Flibe (2LiF + BeF{sub 2}), Fnabe (NaF + BeF{sub 2}) and Flinabe are investigated in order to clarify the effects of their compositions on hydrogen transfer properties. After making up any of the three molten salts and purifying it using HF, hydrogen permeability, diffusivity and solubility of the molten salts are determined experimentally by using a system composed of tertiary cylindrical tubes. Close agreement is obtained between experimental data and analytical solutions. H{sub 2} permeability, diffusivity and solubility are correlated as a function of temperature and are compared among the three molten salts.

  3. DEM-CFD simulation of purge gas flow in a solid breeder pebble bed

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hao [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027 (China); Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); Li, Zhenghong [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); University of Science and Technology of China, Hefei 230027 (China); Guo, Haibing [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); Ye, Minyou [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027 (China); Huang, Hongwen, E-mail: inpclane@sina.com [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China)

    2016-12-15

    Solid tritium breeding blanket applying pebble bed concept is promising for fusion reactors. Tritium bred in the pebble bed is purged out by inert gas. The flow characteristics of the purge gas are important for the tritium transport from the solid breeder materials. In this study, a randomly packed pebble bed was generated by Discrete Element Method (DEM) and verified by radial porosity distribution. The flow parameters of the purge gas in channels were solved by Computational Fluid Dynamics (CFD) method. The results show that the normalized velocity magnitudes have the same damped oscillating patterns with radial porosity distribution. Besides, the bypass flow near the wall cannot be ignored in this model, and it has a slight increase with inlet velocity. Furthermore, higher purging efficiency becomes with higher inlet velocity and especially higher in near wall region.

  4. Silver Teflon blanket: LDEF tray C-08

    Science.gov (United States)

    Crutcher, E. Russ; Nishimura, L. S.; Warner, K. J.; Wascher, W. W.

    1992-01-01

    A study of the Teflon blanket surface at the edge of tray C-08 illustrates the complexity of the microenvironments on the Long Duration Exposure Facility (LDEF). The distribution of particulate contaminants varied dramatically over a distance of half a centimeter (quarter of an inch) near the edge of the blanket. The geometry and optical effects of the atomic oxygen erosion varied significantly over the few centimeters where the blanket folded over the edge of the tray resulting in a variety of orientations to the atomic oxygen flux. A very complex region of combined mechanical and atomic oxygen damage occurred where the blanket contacted the edge of the tray. A brown film deposit apparently fixed by ultraviolet light traveling by reflection through the Teflon film was conspicuous beyond the tray contract zone. Chemical and structural analysis of the surface of the brown film and beyond toward the protected edge of the blanket indicated some penetration of energetic atomic oxygen at least five millimeters past the blanket-tray contact interface.

  5. Impact analysis of the time trend of TBR and irradiation damage assessment of HCSB blanket for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Zeng, Qin, E-mail: zengqin@ustc.edu.cn; Chen, Hongli; Lv, Zhongliang; Pan, Lei; Zhang, Haoran; Shi, Wei

    2017-01-15

    Chinese Fusion Engineering Testing Reactor (CFETR) is a test tokamak reactor to bridge the gap between ITER and future fusion power plants and to demonstrate generation of fusion power in China. In fusion power plants, tritium is generated from the reaction of neutron and Lithium. One of the missions of CFETR is the full cycle of tritium self-sufficiency. For the mission, a Helium Cooled Solid Breeder blanket (HCSB) was proposed for CFETR and its conceptual design has been carried out. In order to assess the capacity of the tritium breeding and irradiation damage of first wall of the HCSB blanket during the 8 years’ engineering test stage, this paper presents the time trend of TBR analysis and irradiation damage assessment of HCSB blanket based on the three-dimensional (3D) neutronics model which is created by McCad. In the 3D neutronics model, the outboard blanket on equatorial plane is described based on the detailed 3D engineering model. The calculations were performed by MCNP and FISPACT with FENDL/2.1 data library. The impact analysis of the thickness of coolant plates (CP) and the structural material content in CPs to the TBR is assessment.

  6. Neutron transport-burnup code MCORGS and its application in fusion fission hybrid blanket conceptual research

    Science.gov (United States)

    Shi, Xue-Ming; Peng, Xian-Jue

    2016-09-01

    Fusion science and technology has made progress in the last decades. However, commercialization of fusion reactors still faces challenges relating to higher fusion energy gain, irradiation-resistant material, and tritium self-sufficiency. Fusion Fission Hybrid Reactors (FFHR) can be introduced to accelerate the early application of fusion energy. Traditionally, FFHRs have been classified as either breeders or transmuters. Both need partition of plutonium from spent fuel, which will pose nuclear proliferation risks. A conceptual design of a Fusion Fission Hybrid Reactor for Energy (FFHR-E), which can make full use of natural uranium with lower nuclear proliferation risk, is presented. The fusion core parameters are similar to those of the International Thermonuclear Experimental Reactor. An alloy of natural uranium and zirconium is adopted in the fission blanket, which is cooled by light water. In order to model blanket burnup problems, a linkage code MCORGS, which couples MCNP4B and ORIGEN-S, is developed and validated through several typical benchmarks. The average blanket energy Multiplication and Tritium Breeding Ratio can be maintained at 10 and 1.15 respectively over tens of years of continuous irradiation. If simple reprocessing without separation of plutonium from uranium is adopted every few years, FFHR-E can achieve better neutronic performance. MCORGS has also been used to analyze the ultra-deep burnup model of Laser Inertial Confinement Fusion Fission Energy (LIFE) from LLNL, and a new blanket design that uses Pb instead of Be as the neutron multiplier is proposed. In addition, MCORGS has been used to simulate the fluid transmuter model of the In-Zinerater from Sandia. A brief comparison of LIFE, In-Zinerater, and FFHR-E will be given.

  7. Influence of gas pressure on the effective thermal conductivity of ceramic breeder pebble beds

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Weijing [School of Civil Engineering, The University of Sydney, Sydney (Australia); Pupeschi, Simone [Institute for Applied Materials, Karlsruhe Institute of Technology (KIT) (Germany); Hanaor, Dorian [School of Civil Engineering, The University of Sydney, Sydney (Australia); Institute for Materials Science and Technologies, Technical University of Berlin (Germany); Gan, Yixiang, E-mail: yixiang.gan@sydney.edu.au [School of Civil Engineering, The University of Sydney, Sydney (Australia)

    2017-05-15

    Highlights: • This study explicitly demonstrates the influence of the gas pressure on the effective thermal conductivity of pebble beds. • The gas pressure influence is shown to correlated to the pebble size. • The effective thermal conductivity is linked to thermal-mechanical properties of pebbles and packing structure. - Abstract: Lithium ceramics have been considered as tritium breeder materials in many proposed designs of fusion breeding blankets. Heat generated in breeder pebble beds due to nuclear breeding reaction must be removed by means of actively cooled plates while generated tritiums is recovered by purge gas slowly flowing through beds. Therefore, the effective thermal conductivity of pebble beds that is one of the governing parameters determining heat transport phenomenon needs to be addressed with respect to mechanical status of beds and purge gas pressure. In this study, a numerical framework combining finite element simulation and a semi-empirical correlation of gas gap conduction is proposed to predict the effective thermal conductivity. The purge gas pressure is found to vary the effective thermal conductivity, in particular with the presence of various sized gaps in pebble beds. Random packing of pebble beds is taken into account by an approximated correlation considering the packing factor and coordination number of pebble beds. The model prediction is compared with experimental observation from different sources showing a quantitative agreement with the measurement.

  8. The reprocessing of advanced mixed lithium orthosilicate/metatitanate tritium breeder pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Leys, Oliver, E-mail: oliver.leys@kit.edu [Karlsruhe Institute of Technology, Institute for Applied Materials, Eggenstein-Leopoldshafen, 76344 (Germany); Bergfeldt, Thomas; Kolb, Matthias H.H.; Knitter, Regina [Karlsruhe Institute of Technology, Institute for Applied Materials, Eggenstein-Leopoldshafen, 76344 (Germany); Goraieb, Aniceto A. [Karlsruhe Beryllium Handling Facility, Eggenstein-Leopoldshafen, 76344 (Germany)

    2016-06-15

    Highlights: • The recycling of advanced breeder pebbles without a deterioration of the material properties is possible using a melt-based process. • The only accumulation of impurities upon reprocessing, results from the platinum crucible alloy used for processing. • It is possible to replenish burnt-up lithium by additions of LiOH·H{sub 2}O to the melt during reprocessing. - Abstract: The recycling of tritium breeding materials will be necessary for any future use of nuclear fusion energy due to economical as well as ecological considerations. In the case of the solid breeder blanket concept, the ceramic pebble beds that are intended for the generation of tritium will eventually need to be restored due to depleted lithium levels as well as due to fractured pebbles, which will cause a deterioration of the pebble bed properties. It is proposed that the pebbles, which are fabricated using a melt-based process, are recycled using the same initial process, by replenishing the lithium levels and reforming the pebbles at the same time. To prove this recycling scheme, advanced ceramic pebbles were fabricated and then re-melted multiple times to prove that the reprocessing did not have any negative effect on the pebble properties and secondly, pebbles were produced with a simulated lithium burn-up and subsequently replenished by additions of LiOH to the melt. It was shown that the re-melting and lithium re-enrichment had no effect on the pebble properties, demonstrating that a melt-based process is suitable for recycling used breeder pebbles.

  9. Experimental Breeder Reactor I Preservation Plan

    Energy Technology Data Exchange (ETDEWEB)

    Julie Braun

    2006-10-01

    Experimental Breeder Reactor I (EBR I) is a National Historic Landmark located at the Idaho National Laboratory, a Department of Energy laboratory in southeastern Idaho. The facility is significant for its association and contributions to the development of nuclear reactor testing and development. This Plan includes a structural assessment of the interior and exterior of the EBR I Reactor Building from a preservation, rather than an engineering stand point and recommendations for maintenance to ensure its continued protection.

  10. FOWL CHOLERA IN A BREEDER FLOCK

    Directory of Open Access Journals (Sweden)

    Z. Parveen, A. A. Nasir, K.Tasneem and A. Shah

    2003-12-01

    Full Text Available During January, 2003 Pasteurella multocida the causative agent of fowl cholera was isolated from a breeder flock in Lahore District. The age of the flock was 245 days. Increased mortality, swollen wattles and lameness were the clinical findings present in almost all the affected birds, while gross lesions were typical of fowl cholera. To prove the virulence of the organism, mice and six-week old cockerals were infected and P. multocida was reisolated.

  11. Optimization of mass-production conditions for tritium breeder pebbles based on slurry droplet wetting method

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yi-Hyun, E-mail: yhpark@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Min, Kyung-Mi; Ahn, Mu-Young; Cho, Seungyon; Lee, Young-Min [National Fusion Research Institute, Daejeon (Korea, Republic of); Park, Sang-Jin; Danish, Rehan; Lim, Chul-Hwan; Jo, Yong-Dae [IVT Co., Ltd., Daegu (Korea, Republic of)

    2016-11-01

    Highlights: • An automatic dispensing system was developed to improve uniformity and production rate of breeder pebbles. • The production rate of this system for Li{sub 2}TiO{sub 3} pebble was estimated at 50 kg/year. • The optimization of dispensing and sintering conditions for the mass-production of Li{sub 2}TiO{sub 3} pebble was conducted. • Integrity of Li{sub 2}TiO{sub 3} pebble was able to be ensured during mass-production process, especially during batch process. - Abstract: Lithium metatitanate (Li{sub 2}TiO{sub 3}) is being considered as tritium breeding material for solid-type breeding blanket, which are used in pebble-bed form. The total amount of Li{sub 2}TiO{sub 3} pebbles in Helium Cooled Ceramic Reflector (HCCR) Test Blanket Module (TBM) is approximately 80 kg. Furthermore, DEMO reactor requires a great deal of breeder pebbles. Therefore, the development of mass-production system for breeder pebbles is necessary. The slurry droplet wetting method was adopted in the mass-production process for Li{sub 2}TiO{sub 3} pebbles, which had been developed in Korea. In this method, an automatic slurry dispensing system is one of the key apparatuses because the uniformity of pebbles and production rate are able to be improved. The system was successfully manufactured, which was consisted of a dispensing unit for instillation of Li{sub 2}TiO{sub 3} slurry, a glycerin bath for hardening of droplets, and an automatic maintaining unit for constant distance between syringe needle and glycerin surface. The production rate of this system for Li{sub 2}TiO{sub 3} pebble was estimated at 50 kg/year. In this study, it was investigated that the effect of dispensing and sintering conditions on the mass-production of Li{sub 2}TiO{sub 3} pebbles.

  12. What determines hatchling weight: breeder age or incubated egg weight?

    Directory of Open Access Journals (Sweden)

    AB Traldi

    2011-12-01

    Full Text Available Two experiments were carried out to determine which factor influences weight at hatch of broiler chicks: breeder age or incubated egg weight. In Experiment 1, 2340 eggs produced by 29- and 55-week-old Ross® broiler breeders were incubated. The eggs selected for incubation weighed one standard deviation below and above average egg weight. In Experiment 2, 2160 eggs weighing 62 g produced by breeders of both ages were incubated. In both experiments, 50 additional eggs within the weight interval determined for each breeder age were weighed, broken, and their components were separated and weighed. At hatch, hatchlings were sexed and weighed, determining the average initial weight of the progeny of each breeder age. Data were analyzed using the Analyst program of SAS® software package. In Experiment 1, the weight difference between eggs produced by young and mature breeders was 10.92 g, and the component that mostly influenced this difference was the yolk (7.51 g heavier in mature breeders, compared with 4.23 g difference in albumen and 0.8 g in eggshell weights. Hatchling weight difference was 9.4 g higher in eggs from mature breeders. In Experiment 2, egg weight difference was only 0.74 g, but yolk weight was 4.59 g higher in the eggs of mature breeders. The results obtained in the present study indicate that hatchling weight is influenced by egg weight, and not by breeder age.

  13. Water cooled breeder program summary report (LWBR (Light Water Breeder Reactor) development program)

    Energy Technology Data Exchange (ETDEWEB)

    1987-10-01

    The purpose of the Department of Energy Water Cooled Breeder Program was to demonstrate pratical breeding in a uranium-233/thorium fueled core while producing electrical energy in a commercial water reactor generating station. A demonstration Light Water Breeder Reactor (LWBR) was successfully operated for more than 29,000 effective full power hours in the Shippingport Atomic Power Station. The reactor operated with an availability factor of 76% and had a gross electrical output of 2,128,943,470 kilowatt hours. Following operation, the expended core was examined and no evidence of any fuel element defects was found. Nondestructive assay of 524 fuel rods determined that 1.39 percent more fissile fuel was present at the end of core life than at the beginning, proving that breeding had occurred. This demonstrates the existence of a vast source of electrical energy using plentiful domestic thorium potentially capable of supplying the entire national need for many centuries. To build on the successful design and operation of the Shippingport Breeder Core and to provide the technology to implement this concept, several reactor designs of large breeders and prebreeders were developed for commercial-sized plants of 900--1000 Mw(e) net. This report summarizes the Water Cooled Breeder Program from its inception in 1965 to its completion in 1987. Four hundred thirty-six technical reports are referenced which document the work conducted as part of this program. This work demonstrated that the Light Water Breeder Reactor is a viable alternative as a PWR replacement in the next generation of nuclear reactors. This transition would only require a minimum of change in design and fabrication of the reactor and operation of the plant.

  14. APEX ADVANCED FERRITIC STEEL, FLIBE SELF-COOLED FIRST WALL AND BLANKET DESIGN

    Energy Technology Data Exchange (ETDEWEB)

    WONG,CPC; MALANG,S; SAWAN,M; SVIATOSLAVSKY,I; MOGAHED,E; SMOLENTSEV,S; MAJUMDAR,S; MERRILL,B; MATTAS,R; FRIEND,M; BOLIN,J; SHARAFAT,S

    2003-11-01

    OAK-B135 As an element in the US Advanced Power Extraction (APEX) program, they evaluated the design option of using advanced nanocomposite ferritic steel (AFS) as the structural material and Flibe as the tritium breeder and coolant. They selected the recirculating flow configuration as the reference design. Based on the material properties of AFS, they found that the reference design can handle a maximum surface heat flux of 1 MW/m{sup 2}, and a maximum neutron wall loading of 5.4 MW/m{sup 2}, with a gross thermal efficiency of 47%, while meeting all the tritium breeding and structural design requirements. This paper covers the results of the following areas of evaluation: materials selection, first wall and blanket design configuration, materials compatibility, components fabrication, neutronics analysis, thermal hydraulics analysis including MHD effects, structural analysis, molten salt and helium closed cycle power conversion system, and safety and waste disposal of the recirculating coolant design.

  15. Three-dimensional neutronic analysis of the European ceramic BIT DEMO blanket

    Energy Technology Data Exchange (ETDEWEB)

    Giancarli, L.; Diop, C. (Commissariat a l' Energie Atomique, CEN Saclay DMT/SERMA, 91 - Gif-sur-Yvette (France)); Petrizzi, L.; Rado, V. (ENEA-FUS, CRE, Frascati (Italy))

    1991-12-01

    The present study concerns the 3-D geometry evaluations of the tritium breeding ratio of the breeder-in-tube helium-cooled ceramic blanket performed at CEA and ENEA in the framework of the recently released DEMONET specifications. For the calculations the nuclear data have all been derived by the European Fusion File (EFF-1), but different Monte Carlo codes, and different design variants and geometrical models have been used. A benchmark calculation has been defined in order to better analyse the results; such an exercise has shown that TBR differences of a few percent could be due to the calculation methods. The determined global TBR ranges from 1.06 in the CEA results to 1.15 in the ENEA results, the expected difference being mainly due to the greater neutron coverage of the ENEA variant of the design. Heat deposition density and He production in beryllium are also given. (orig.).

  16. Natural circulation in fusion reactor blankets

    Science.gov (United States)

    Gierszewski, P. J.; Mikic, B.; Todreas, N. E.

    1980-07-01

    The relative importance of natural circulation and heat conduction as heat transfer mechanisms in lithium, sodium and flibe is investigated for a range of magnetic field strengths of interest in fusion reactor blankets. The calculations are based on an order-of-magnitude simplification of the fluid equations, and a modified version of the fission reactor thermal-hydraulic code THERMIT. The results show that conduction is dominant for lithium (and sodium) for typical magnetic field strengths, but that natural circulation is most important in flibe. In fact, preliminary calculations suggest the possibility of a simple flibe blanket module with cooling only along the module boundaries.

  17. Inclusion and difusion studies of D in fusion breeding blanket candidate materials

    Energy Technology Data Exchange (ETDEWEB)

    Fan, L.

    2015-07-01

    Deuterium-Tritium (D-T) reaction is the most practical fusion reaction on the way to harness fusion energy. As tritium presents trace quantities on Earth [1], tritium fuel is essential to be generated simultaneously with the D-T reaction in a commerical fusion power plant. Tritium can be obtained in the lithium contained breeding blanket as a transmutation product of nuclear reaction 6Li (n, a)T. Li2T iO3 is considered to be one promising candidate solid tritium breeder material, due to its high lithium density, low activation, compatiblity with structure materials and high chemical stability. The tritium generated in Li2T iO3 breeding blanket needs to be collected and recycled back to the fusion reaction. Therefore, the study of the diffusion characteristic of breeder material Li2T iO3 is necessary to determine tritium mobility and tritium extraction efficiency. In order to study tritium release mechanism of Li2T iO3 breeding material in a fusion power plant environment, a fusion like neutron spectrum is essential while it is now not availble in any laboratory. One alternative is using ion accelerator or implantor to get energetic hydrogenic (H,D,T) ions impacting on breeding material, to simulate the tritium distribution situation. Because of the radioactive property of tritium which will complicate processing procedure, another isotope of hydrogen Deuterium is actually used to be studied. The defect structure in Li2T iO3, due to reactor exposure to fusion generated particles and ? ray irradiation, is achieved by energetic Ti ions. SRIM program is implemented to simulate the D ion or Ti ion distributions after bombarding, as well as the defects. X-ray diffraction technique helps to identify phase compositions. Transmission electron microscopy technique is used to observe the microstructures (Author)

  18. [Reoccurrence of histomonosis in turkey breeder farm].

    Science.gov (United States)

    Aka, Johannes; Hauck, Rüdiger; Blankenstein, Petra; Balczulat, Stefanie; Hafez, Hafez Mohamed

    2011-01-01

    Histomonosis is a severe disease caused by the protozoan parasite Histomonas (H.) meleagridis, which can lead to high losses in turkeys. The present report describes the reoccurrence of histomonosis in a turkey breeder farm. The first outbreak occurred in 2005 in 17 weeks old hens, the second in 2009 in 8 weeks old hens. The disease remained restricted in one house and one compartment, respectively. Mortality rose to 26 and 65% respectively within few days in spite of therapy with various compounds. Both flocks had to be euthanized. In both cases H. meleagridis belonging to genotype A was detected. The source of infection remained unclear in both cases.

  19. Measurements of the purge helium pressure drop across pebble beds packed with lithium orthosilicate and glass pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Abou-Sena, Ali, E-mail: ali.abou-sena@kit.edu; Arbeiter, Frederik; Boccaccini, Lorenzo V.; Schlindwein, Georg

    2014-10-15

    Highlights: • The objective is to measure the purge helium pressure drop across various HCPB-relevant pebble beds packed with lithium orthosilicate and glass pebbles. • The purge helium pressure drop significantly increases with decreasing the pebbles diameter from one run to another. • At the same superficial velocity, the pressure drop is directly proportional to the helium inlet pressure. • The Ergun's equation can successfully model the purge helium pressure drop for the HCPB-relevant pebble beds. • The measured values of the purge helium pressure drop for the lithium orthosilicate pebble bed will support the design of the purge gas system for the HCPB breeder units. - Abstract: The lithium orthosilicate pebble beds of the Helium Cooled Pebble Bed (HCPB) blanket are purged by helium to transport the produced tritium to the tritium extraction system. The pressure drop of the purge helium has a direct impact on the required pumping power and is a limiting factor for the purge mass flow. Therefore, the objective of this study is to measure the helium pressure drop across various HCPB-relevant pebble beds packed with lithium orthosilicate and glass pebbles. The pebble bed was formed by packing the pebbles into a stainless steel cylinder (ID = 30 mm and L = 120 mm); then it was integrated into a gas loop that has four variable-speed side-channel compressors to regulate the helium mass flow. The static pressure was measured at two locations (100 mm apart) along the pebble bed and at inlet and outlet of the pebble bed. The results demonstrated that: (i) the pressure drop significantly increases with decreasing the pebbles diameter, (ii) for the same superficial velocity, the pressure drop is directly proportional to the inlet pressure, and (iii) predictions of Ergun's equation agree well with the experimental results. The measured pressure drop for the lithium orthosilicate pebble bed will support the design of the purge gas system for the HCPB.

  20. The climatic impact of supervolcanic ash blankets

    Science.gov (United States)

    Jones, Morgan T.; Sparks, R. Stephen J.; Valdes, Paul J.

    2007-11-01

    Supervolcanoes are large caldera systems that can expel vast quantities of ash, volcanic gases in a single eruption, far larger than any recorded in recent history. These super-eruptions have been suggested as possible catalysts for long-term climate change and may be responsible for bottlenecks in human and animal populations. Here, we consider the previously neglected climatic effects of a continent-sized ash deposit with a high albedo and show that a decadal climate forcing is expected. We use a coupled atmosphere-ocean General Circulation Model (GCM) to simulate the effect of an ash blanket from Yellowstone volcano, USA, covering much of North America. Reflectivity measurements of dry volcanic ash show albedo values as high as snow, implying that the effects of an ash blanket would be severe. The modeling results indicate major disturbances to the climate, particularly to oscillatory patterns such as the El Niño Southern Oscillation (ENSO). Atmospheric disruptions would continue for decades after the eruption due to extended ash blanket longevity. The climatic response to an ash blanket is not significant enough to instigate a change to stadial periods at present day boundary conditions, though this is one of several impacts associated with a super-eruption which may induce long-term climatic change.

  1. The climatic impact of supervolcanic ash blankets

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Morgan T.; Sparks, R.S.J. [University of Bristol, Department of Earth Sciences, Bristol (United Kingdom); Valdes, Paul J. [University of Bristol, School of Geographical Sciences, Bristol (United Kingdom)

    2007-11-15

    Supervolcanoes are large caldera systems that can expel vast quantities of ash, volcanic gases in a single eruption, far larger than any recorded in recent history. These super-eruptions have been suggested as possible catalysts for long-term climate change and may be responsible for bottlenecks in human and animal populations. Here, we consider the previously neglected climatic effects of a continent-sized ash deposit with a high albedo and show that a decadal climate forcing is expected. We use a coupled atmosphere-ocean General Circulation Model (GCM) to simulate the effect of an ash blanket from Yellowstone volcano, USA, covering much of North America. Reflectivity measurements of dry volcanic ash show albedo values as high as snow, implying that the effects of an ash blanket would be severe. The modeling results indicate major disturbances to the climate, particularly to oscillatory patterns such as the El Nino Southern Oscillation (ENSO). Atmospheric disruptions would continue for decades after the eruption due to extended ash blanket longevity. The climatic response to an ash blanket is not significant enough to investigate a change to stadial periods at present day boundary conditions, though this is one of several impacts associated with a super-eruption which may induce long-term climatic change. (orig.)

  2. Fidget Blankets: A Sensory Stimulation Outreach Program.

    Science.gov (United States)

    Kroustos, Kelly Reilly; Trautwein, Heidi; Kerns, Rachel; Sobota, Kristen Finley

    2016-01-01

    Behavioral and Psychological Symptoms of Dementia (BPSD) include behaviors such as aberrant motor behavior, agitation, anxiety, apathy, delusions, depression, disinhibition, elation, hallucinations, irritability, and sleep or appetite changes. A student-led project to provide sensory stimulation in the form of "fidget blankets" developed into a community outreach program. The goal was to decrease the use of antipsychotics used for BPSD.

  3. Aerogel Blanket Insulation Materials for Cryogenic Applications

    Science.gov (United States)

    Coffman, B. E.; Fesmire, J. E.; White, S.; Gould, G.; Augustynowicz, S.

    2009-01-01

    Aerogel blanket materials for use in thermal insulation systems are now commercially available and implemented by industry. Prototype aerogel blanket materials were presented at the Cryogenic Engineering Conference in 1997 and by 2004 had progressed to full commercial production by Aspen Aerogels. Today, this new technology material is providing superior energy efficiencies and enabling new design approaches for more cost effective cryogenic systems. Aerogel processing technology and methods are continuing to improve, offering a tailor-able array of product formulations for many different thermal and environmental requirements. Many different varieties and combinations of aerogel blankets have been characterized using insulation test cryostats at the Cryogenics Test Laboratory of NASA Kennedy Space Center. Detailed thermal conductivity data for a select group of materials are presented for engineering use. Heat transfer evaluations for the entire vacuum pressure range, including ambient conditions, are given. Examples of current cryogenic applications of aerogel blanket insulation are also given. KEYWORDS: Cryogenic tanks, thermal insulation, composite materials, aerogel, thermal conductivity, liquid nitrogen boil-off

  4. ITER driver blanket, European Community design

    Energy Technology Data Exchange (ETDEWEB)

    Simbolotti, G. (EURATOM-ENEA Association on Fusion Research, C.R.E., Frascati (Italy)); Zampaglione, V. (EURATOM-ENEA Association on Fusion Research, C.R.E., Frascati (Italy)); Ferrari, M. (EURATOM-ENEA Association on Fusion Research, C.R.E., Frascati (Italy)); Gallina, M. (EURATOM-ENEA Association on Fusion Research, C.R.E., Frascati (Italy)); Mazzone, G. (EURATOM-ENEA Association on Fusion Research, C.R.E., Frascati (Italy)); Nardi, C. (EURATOM-ENEA Association on Fusion Research, C.R.E., Frascati (Italy)); Petrizzi, L. (EURATOM-ENEA Association on Fusion Research, C.R.E., Frascati (Italy)); Rado, V. (EURATOM-ENEA Association on Fusion Research, C.R.E., Frascati (Italy)); Violante, V. (EURATOM-ENEA Association on Fusion Research, C.R.E., Frascati (Italy)); Daenner, W. (NET Team, Max-Planck-Inst. fuer Plasmaphysik, Garching (Germany)); Lorenzetto, P. (NET Team, Max-Planck-Inst. fuer Plasmaphysik, Garching (Germany)); Gierszewski, P. (CFFTP, Mississauga, ON (Canada)); Gratt

    1993-07-01

    Depending on the final decision on the operation time of ITER (International Thermonuclear Experimental Reactor), the Driver Blanket might become a basic component of the machine with the main function of producing a significant fraction (close to 0.8) of the tritium required for the ITER operation, the remaining fraction being available from external supplies. The Driver Blanket is not required to provide reactor relevant performance in terms of tritium self-sufficiency. However, reactor relevant reliability and safety are mandatory requirements for this component in order not to significantly afftect the overall plant availability and to allow the ITER experimental program to be safely and successfully carried out. With the framework of the ITER Conceptual Design Activities (CDA, 1988-1990), a conceptual design of the ITER Driver Blanket has been carried out by ENEA Fusion Dept., in collaboration with ANSALDO S.p.A. and SRS S.r.l., and in close consultation with the NET Team and CFFTP (Canadian Fusion Fuels Technology Project). Such a design has been selected as EC (European Community) reference design for the ITER Driver Blanket. The status of the design at the end of CDA is reported in the present paper. (orig.)

  5. Neutronics Evaluation of Lithium-Based Ternary Alloys in IFE Blankets

    Energy Technology Data Exchange (ETDEWEB)

    Jolodosky, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Fratoni, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-11-20

    Pre-conceptual fusion blanket designs require research and development to reflect important proposed changes in the design of essential systems, and the new challenges they impose on related fuel cycle systems. One attractive feature of using liquid lithium as the breeder and coolant is that it has very high tritium solubility and results in very low levels of tritium permeation throughout the facility infrastructure. However, lithium metal vigorously reacts with air and water and presents plant safety concerns. If the chemical reactivity of lithium could be overcome, the result would have a profound impact on fusion energy and associated safety basis. The overriding goal of this project is to develop a lithium-based alloy that maintains beneficial properties of lithium (e.g. high tritium breeding and solubility) while reducing overall flammability concerns. To minimize the number of alloy combinations that must be explored, only those alloys that meet certain nuclear performance metrics will be considered for subsequent thermodynamic study. The specific scope of this study is to evaluate the neutronics performance of lithium-based alloys in the blanket of an inertial confinement fusion (ICF) engine. The results of this study will inform the development of lithium alloys that would guarantee acceptable neutronics performance while mitigating the chemical reactivity issues of pure lithium.

  6. Industrial solar breeder project using concentrator photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, R; Wohlgemuth, J; Burkholder, J; Levine, A; Storti, G; Wrigley, C; McKegg, A

    1979-08-01

    The purpose of this program is to demonstrate the use of a concentrating photovoltaic system to provide the energy for operating a silicon solar cell production facility, i.e., to demonstrate a solar breeder. Solarex has proposed to conduct the first real test of the solar breeder concept by building and operating a 200 kW(e) (peak) concentrating photovoltaic system based on the prototype and system design developed during Phase I. This system will provide all of the electrical and thermal energy required to operate a solar cell production line. This demonstration would be conducted at the Solarex Rockville facility, with the photovoltaic array located over the company parking lot and on an otherwise unusable flood plain. Phase I of this program included a comprehensive analysis of the application, prototype fabrication and evaluation, system design and specification, and a detailed plan for Phases II and III. A number of prototype tracking concentrator solar collectors were constructed and operated. Extensive system analysis was performed to design the Phase II system as a stand-alone power supply for a solar cell production line. Finally, a detailed system fabrication proposal for Phase II and an operation and evaluation plan for Phase III were completed. These proposals included technical, management, and cost plans for the fabrication and exercise of the proposed system.

  7. Disinfection of hospital blankets with synthetic phenolic compounds.

    Science.gov (United States)

    LARKIN, I M; BRIDSON, E Y; GRIEVE, W S; GIBSON, J W

    1961-01-01

    A cheap method by which hospital blankets may be effectively disinfected (approximately 3d. per blanket) is described. A recommendation is made that blankets from the patients' beds be divided into: ;socially dirty' blankets to be laundered, possibly at infrequent intervals; and ;socially clean' blankets to be disinfected frequently. The wide range of a synthetic phenolic compound is described. This substance is effective against all the common pathogenic bacteria in the presence of organic matter, anionic, or cationic detergents. Details are given of laboratory trials with this method of disinfection and of pilot trials at the Group hospital laundry. The recommended method is simpler and takes less time than ordinary washing.

  8. Abrupt or gradual increases in photoperiod for broiler breeders ...

    African Journals Online (AJOL)

    Broiler breeders transferred from closed rearing to curtain-sided adult accommodation (similar to that in which a large proportion of broiler breeders are housed) respond similarly to abrupt and gradual increases in daylength as do birds maintained throughout in controlled environment accommodation, and modern ...

  9. The response of broiler breeder hens to dietary balanced protein

    African Journals Online (AJOL)

    Research

    2016-08-26

    Aug 26, 2016 ... overconsumption of protein and energy. Various estimates of the daily intake of protein required by broiler breeders to support egg production have been made by researchers in the past, these varying from 16.5 g/d, for individually housed breeders. (Pearson & Herron, 1982) to 22 g/d (Waldroup et al., ...

  10. Parameters for quantification of hunger in broiler breeders.

    NARCIS (Netherlands)

    Jong, de I.C.; Voorst, van A.S.; Blokhuis, H.J.

    2003-01-01

    The commercial restricted feeding programme of broiler breeders has a major negative effect on welfare, as the birds are continuously hungry. Objective parameters of hunger are needed to evaluate new management or feeding systems that may alleviate hunger and thus improve broiler breeder welfare.

  11. Staphylococcus agnetis, a potential pathogen in broiler breeders

    DEFF Research Database (Denmark)

    Poulsen, Louise Ladefoged; Thøfner, Ida; Bisgaard, Magne

    2017-01-01

    including bacteriological examination. In total 997 breeders were investigated and for the first time Staphylococcus agnetis was isolated in pure culture from cases of endocarditis and septicemia from 16 broiler breeders. In addition, the cloacal flora from newly hatched chickens originating from the same...

  12. Characteristics of Reproductive Tracts of Repeat Breeders in Cattle ...

    African Journals Online (AJOL)

    The study observed the characteristics and assessed abnormalities in reproductive tracts of repeat breeders in cattle. Fourty (40) herds were sampled during the study and fifty seven (57) repeat breeders were identified. The animals had normal reproductive tracts with good body condition scores (BCS) ranging from 2.5- 4.5 ...

  13. Conceptual design of Indian molten salt breeder reactor

    Indian Academy of Sciences (India)

    2015-08-28

    Aug 28, 2015 ... Home; Journals; Pramana – Journal of Physics; Volume 85; Issue 3. Conceptual design of Indian molten salt breeder ... India has recently started carrying out fundamental studies so as to arrive at a conceptual design of Indian molten salt breeder reactor (IMSBR). Presently, various design options and ...

  14. Plasma instabilities of a charge breeder ECRIS

    Science.gov (United States)

    Tarvainen, O.; Angot, J.; Izotov, I.; Skalyga, V.; Koivisto, H.; Thuillier, T.; Kalvas, T.; Lamy, T.

    2017-10-01

    Experimental observation of plasma instabilities in a charge breeder electron cyclotron resonance ion source (CB-ECRIS) is reported. It is demonstrated that the injection of 133Cs+ or 85Rb+ ion beam into the oxygen discharge of the CB-ECRIS can trigger electron cyclotron instabilities, which restricts the parameter space available for the optimization of the charge breeding efficiency. It is concluded that the transition from a stable to unstable plasma regime is caused by gradual accumulation and ionization of Cs/Rb and simultaneous change of the discharge parameters in 10-100 ms time scale, not by a prompt interaction between the incident ion beam and the ECRIS plasma. The instabilities lead to loss of ion confinement, which results in the sputtering of the surfaces in contact with the plasma, followed by up to an order of magnitude increase of impurity currents in the extracted n+ ion beam.

  15. Lay-out and materials for in pile tritium transport testing of breeder-inside-tube pin assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Alvani, C. [ENEA, CR Casaccia, Rome (Italy); Avon, J. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN, Grenoble (France); Casadio, S. [ENEA, CR Casaccia, Rome (Italy); Mancini, M.R. [ENEA, CR Casaccia, Rome (Italy); Nannetti, C.A. [ENEA, CR Casaccia, Rome (Italy); Pruzzo, G. [ENEA, CR Casaccia, Rome (Italy)]|[FN, Bosco Marengo-Alessandria (Italy); Ravel, S. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN, Grenoble (France); Roux, N. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN Saclay, Gif-sur-Yvette (France); Terlain, A. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN, Fontenay-aux-Roses (France); Terrosi [ENEA, CR Casaccia, Rome (Italy)]|[FN, Bosco Marengo-Alessandria (Italy); Zaghini, P. [ENEA, CR Casaccia, Rome (Italy)]|[FIN-Ceramica, Faenza, Ravenna (Italy); Zanardi, P. [ENEA, CR Casaccia, Rome (Italy)]|[ENEA, CR Clementel-Bologna (Italy); Zanotti, M. [ENEA, CR Casaccia, Rome (Italy)]|[ENEA, CR Clementel-Bologna (Italy)

    1995-12-31

    An irradiation experiment (90 FPD in SILOE reactor) has been designed in order to evaluate the in-situ effect of red-ox power of sweeping gas (helium with 100 vpm of H{sub 2}/H{sub 2}O with relative concentrations varying from pure H{sub 2} to pure H{sub 2}O) on (a) Tritium removal from LiAlO{sub 2} and Li{sub 2}ZrO{sub 3}; (b) Tritium permeation through AISI-316L SS tubes with bare and coated surfaces. The conditions and materials explored were selected in order to test possible improvements with respect to critical issues for the `Breeder Inside Tube` (BIT) blanket concept development. (orig.).

  16. Report of a technical evaluation panel on the use of beryllium for ITER plasma facing material and blanket breeder material

    Energy Technology Data Exchange (ETDEWEB)

    Ulrickson, M.A. [ed.] [Sandia National Labs., Albuquerque, NM (United States); Manly, W.D. [Oak Ridge National Lab., TN (United States); Dombrowski, D.E. [Brush Wellman, Inc., Cleveland, OH (United States)] [and others

    1995-08-01

    Beryllium because of its low atomic number and high thermal conductivity, is a candidate for both ITER first wall and divertor surfaces. This study addresses the following: why beryllium; design requirements for the ITER divertor; beryllium supply and unirradiated physical/mechanical property database; effects of irradiation on beryllium properties; tritium issues; beryllium health and safety; beryllium-coolant interactions and safety; thermal and mechanical tests; plasma erosion of beryllium; recommended beryllium grades for ITER plasma facing components; proposed manufacturing methods to produce beryllium parts for ITER; emerging beryllium materials; proposed inspection and maintenance techniques for beryllium components and coatings; time table and costs; and the importance of integrating materials and manufacturing personnel with designers.

  17. Hydrological modelling of drained blanket peatland

    Science.gov (United States)

    Ballard, C. E.; McIntyre, N.; Wheater, H. S.; Holden, J.; Wallage, Z. E.

    2011-09-01

    SummaryOpen ditch drainage is a commonly implemented land management practice in upland blanket peatlands, particularly in the UK, where policy decisions between the 1940s and 1970s led to widespread drainage of the uplands. The change in the hydrological regime associated with the drainage of blanket peat is poorly understood, yet has perceived importance for flooding, low flows and water quality. We propose a new simplified physics-based model that allows the associated hydrological processes and flow responses to be explored. The model couples four one-dimensional models to represent a three-dimensional hillslope, allowing for the exploration of flow and water table response throughout the model domain for a range of drainage configurations and peat properties. The model is tested against a data set collected from Oughtershaw Beck, UK, with results showing good model performance for wet periods although less conformity with borehole observations during rewetting periods. A wider exploration of model behaviour indicates that the model is consistent with the hydrological response reported in the literature for a number of drained blanket peat sites, and therefore has potential to provide guidance to decision makers concerning the effects of management practices. Through a global sensitivity analysis, we conclude that further field investigations to assist in the surface and drain roughness parameterisation would help reduce the uncertainty in the model predictions.

  18. Tokamak blanket design study, final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    A cylindrical module concept was developed, analyzed, and incorporated in a tokamak blanket system that includes piping systems, vacuum boundary sealing, and support structures. The design is based on the use of state-of-the-art structural materials (20% cold-worked type 316 stainless steel), lithium as the breeding material, and pressurized helium as the coolant. The module design consists of nested concentric cylinders (with an outer diameter of 10 cm) and features direct wall cooling by helium flowing between the outer (first-wall) cylinder and the inner (lithium-containing) cylinder. Each cylinder can withstand full coolant pressure, thus enhancing reliability. Results show that stainless steel is a viable material for a first wall subjected to a neutron wall loading of 4 MW/m/sup 2/ and a particle heat flux of 1 MW/m/sup 2/. Lifetime analysis shows that the first-wall design meets the goal of operating at 20-min cycles with 95% duty for 100,000 cycles. To reduce system complexity, a larger 20-cm-diam module also was analyzed for incorporation in the blanket assembly. Reliability assessment indicates that it may be possible to double the module in size from 10 to 20 cm in diameter. With a modest increase in coolant pumping power, a blanket assembly comprising 20-cm-diam modules can still achieve 100,000 operating cycles - equivalent to a 3.6-year design lifetime - with only one or two helium coolant leaks into the plasma.

  19. TCT hybrid preconceptual blanket design studies

    Energy Technology Data Exchange (ETDEWEB)

    Aase, D.T.; Bampton, M.C.C.; Doherty, T.J.; Leonard, B.R.; McCann, R.A.; Newman, D.F.; Perry, R.T.; Stewart, C.W.

    1978-01-01

    The conceptual design of a tokamak fusion-fission (hybrid) reactor, which produces electric power and fissile material, has been performed in a cooperative effort between Princeton's Plasma Physics Laboratory (PPPL) and Battelle's Pacific Northwest Laboratories (PNL). PPPL, who had overall project lead responsibility, designed the fusion driver system. Its core consists of a tokamak plasma maintained in the two-component torus (TCT) mode by both D and T beams and having a single null poloidal divertor. The blanket concept selected by PPPL consists of a neutron multiplying converter region, containing natural Uranium Molybdenum (U-Mo) slugs followed by a fuel burning blanket region of molten salt containing PuF/sub 3/. PNL analyzed this concept to determine its structural, thermal and hydraulic performance characteristics. An adequate first wall cooling method was determined, utilizing low pressure water in a double wall design. A conceptual layout of the converter region tubes was performed, providing adequate helium cooling and the desired movement of U-Mo slugs. A thermal hydraulic analysis of the power-producing blanket regions indicated that either more helium coolant tubes are needed or the salt must be circulated to obtain adequate heat removal capability.

  20. Conceptual design of Blanket Remote Handling System for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Wei, Jianghua, E-mail: weijh@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Song, Yuntao, E-mail: songyt@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); University of Science and Technology of China, Hefei (China); Pei, Kun; Zhao, Wenlong; Zhang, Yu; Cheng, Yong [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China)

    2015-11-15

    Highlights: • The concept for the blanket maintenance is carried out, including three sub-systems. • The basic maintenance procedure for blanket between VV and hot cell is carried out. • The primary kinematics study is used to verify the feasibility of BRHS. • Virtual reality is adopted as another approach to verify the concept design. - Abstract: The China Fusion Engineering Testing Reactor (CFETR), which is a new superconducting tokamak device being designed by China, has a mission to achieve a high duty time (0.3–0.5). To accomplish this great mission, the big modular blanket option has been adopted to achieve the high efficiency of the blanket maintenance. Considering this mission and the large and heavy blanket module, a novel conceptual blanket maintenance system for CFETR has been carried out by us over the past year. This paper presents the conceptual design of the Blanket Remote Handling System (BRHS), which mainly comprises the In-Vessel-Maintenance-System (IVMS), Lifting System and Blanket-Tool-Manipulator System (BTMS). The BRHS implements the extraction and replacement between in-vessel (the blanket module operation configuration location) and ex-vessel (inside of the vertical maintenance cask) by the collaboration of these three sub systems. What is more, this paper represents the blanket maintenance procedure between the docking station (between hot cell building and tokamak building) and inside the vacuum vessel, in tokamak building. Virtual reality technology is also used to verify and optimize our concept design.

  1. Analysis of Consistency of Printing Blankets using Correlation Technique

    Directory of Open Access Journals (Sweden)

    Lalitha Jayaraman

    2010-01-01

    Full Text Available This paper presents the application of an analytical tool to quantify material consistency of offset printing blankets. Printing blankets are essentially viscoelastic rubber composites of several laminas. High levels of material consistency are expected from rubber blankets for quality print and for quick recovery from smash encountered during the printing process. The present study aims at determining objectively the consistency of printing blankets at three specific torque levels of tension under two distinct stages; 1. under normal printing conditions and 2. on recovery after smash. The experiment devised exhibits a variation in tone reproduction properties of each blanket signifying the levels of inconsistency also in thicknessdirection. Correlation technique was employed on ink density variations obtained from the blanket on paper. Both blankets exhibited good consistency over three torque levels under normal printing conditions. However on smash the recovery of blanket and its consistency was a function of manufacturing and torque levels. This study attempts to provide a new metrics for failure analysis of offset printing blankets. It also underscores the need for optimizing the torque for blankets from different manufacturers.

  2. Iron requirements of broiler breeder hens.

    Science.gov (United States)

    Taschetto, Diogo; Vieira, Sergio Luiz; Angel, Clara Roselina; Stefanello, Catarina; Kindlein, Liris; Ebbing, Marco Antonio; Simões, Cristina Tonial

    2017-09-01

    A study was conducted to investigate Fe requirements of broiler breeders. One-hundred-fifty-six Cobb 500 broiler breeder hens were individually placed in electrostatically painted cages at 22 weeks. The study was composed of an adaptation phase, in which hens were fed corn-soy-wheat bran diets until 35 wks. An Fe deficient mash diet (24.6 ppm Fe) was provided from 35 to 46 wk in order to induce a partial body Fe depletion. A production phase followed from 47 to 70 wk when hens were fed 6 diets with increasing Fe sulfate supplementation, which, upon analyses had 24.6, 48.6, 74.3, 99.6, 125.6, and 148.2 ppm Fe. Thirty hatching eggs from each treatment were randomly collected in the last wk of each production period and incubated. Hemoglobin and hematocrit were analyzed from 6 hens as well as all hatched chicks per treatment. Analyses of production and hatching data were conducted using quadratic polynomial (QP), broken-line (BL), and exponential asymptotic (EA) models. Effects of dietary Fe were observed for total eggs and total hatching eggs, egg yolk Fe content, and hen and chick hematocrit and hemoglobin (P < 0.05). These responses to added Fe were optimized when dietary Fe were 96.8, 97.1, 130.6, 122.6, 120.0, and 125.0 ppm (QP) and 76.4, 89.3, 135.0, 128.4, 133.8, and 95.0 ppm (BL) for total hatching eggs, egg yolk Fe content, and hen and chick hematocrit and hemoglobin, respectively. Optimization with the EA model was obtained for total hatching eggs, egg yolk Fe, and hen and chick hemoglobin at 97.9, 111.0, 77.9, and 96.3 ppm Fe for total hatching eggs, egg yolk Fe, and hen and chick hemoglobin, respectively. Adequate Fe levels are needed to maintain egg production as well as hatching chicks' indexes. Fe concentration in the yolk and diet are positively influenced. The average of all Fe requirement estimates obtained in the present study was 106 ppm total Fe, whereas averaged values for BL, QP, and EA models were 107, 113, and 97 ppm Fe, respectively. © 2017

  3. Thin Thermal-Insulation Blankets for Very High Temperatures

    Science.gov (United States)

    Choi, Michael K.

    2003-01-01

    Thermal-insulation blankets of a proposed type would be exceptionally thin and would endure temperatures up to 2,100 C. These blankets were originally intended to protect components of the NASA Solar Probe spacecraft against radiant heating at its planned closest approach to the Sun (a distance of 4 solar radii). These blankets could also be used on Earth to provide thermal protection in special applications (especially in vacuum chambers) for which conventional thermal-insulation blankets would be too thick or would not perform adequately.

  4. Analysis of UF6 breeder reactor power plants

    Science.gov (United States)

    Clement, J. D.; Rust, J. H.

    1976-01-01

    Gaseous UF6 fueled breeder reactor design and technical applications of such concepts are summarized. Special attention was given to application in nuclear power plants and to reactor efficiency and safety factors.

  5. ECRIS as ion source and charge breeder

    CERN Document Server

    Sortais, P; Chauvin, N; Curdy, Jean Claude; Geller, R; Lamy, T; Solé, P; Vieux-Rochaz, J L

    2002-01-01

    We will recall the main characteristics of ECR ion sources and their very good property of ionization efficiency. We will start with a review of on line use of ECR ion sources for production of mono or multicharged radioactive ions, and then we will specially focus our attention on charge breeding process for multicharged ion production. Initially developed for the PIAFE project from ISN Grenoble, the ECR charge breeder shows that the beam injection of a primary beam inside an ECR ion source is a very general process for beam production. We will review the latest results obtained on the ISN Grenoble test bench for the production of CW or pulsed metallic ion beams with the so called '1 sup + /n sup + ' method. New results are given for CW operation where the efficiency is particularly optimized for application to multicharged radioactive ion production (for example, 3.5% for Zn sup 1 sup +->Zn sup 9 sup + , 4.2% for Pb sup 3 sup +->Pb sup 2 sup 4 sup + , 5% for Rb sup 1 sup +->Rb sup 1 sup 5 sup +). Different ...

  6. Exploding the myths about the fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Burns, S.

    1979-01-01

    This paper discusses the facts and figures about the effects of conservation policies, the benefits of the Clinch River Breeder Reactor demonstration plant, the feasibility of nuclear weapons manufacture from reactor-grade plutonium, diversion of plutonium from nuclear plants, radioactive waste disposal, and the toxicity of plutonium. The paper concludes that the U.S. is not proceeding with a high confidence strategy for breeder development because of a variety of false assumptions.

  7. Environmental Enrichment for Broiler Breeders: An Undeveloped Field.

    Science.gov (United States)

    Riber, Anja B; de Jong, Ingrid C; van de Weerd, Heleen A; Steenfeldt, Sanna

    2017-01-01

    Welfare problems, such as hunger, frustration, aggression, and abnormal sexual behavior, are commonly found in broiler breeder production. To prevent or reduce these welfare problems, it has been suggested to provide stimulating enriched environments. We review the effect of the different types of environmental enrichment for broiler breeders, which have been described in the scientific literature, on behavior and welfare. Environmental enrichment is defined as an improvement of the environment of captive animals, which increases the behavioral opportunities of the animal and leads to improvements in biological function. This definition has been broadened to include practical and economic aspects as any enrichment strategy that adversely affects the health of animals (e.g., environmental hygiene), or that has too many economic or practical constraints will never be implemented on commercial farms and thus never benefit animals. Environmental enrichment for broiler breeders often has the purpose of satisfying the behavioral motivations for feeding and foraging, resting, and/or encouraging normal sexual behavior. Potentially successful enrichments for broiler breeders are elevated resting places, cover panels, and substrate (for broiler breeders housed in cage systems). However, most of the ideas for environmental enrichment for broiler breeders need to be further developed and studied with respect to the use, the effect on behavior and welfare, and the interaction with genotype and production system. In addition, information on practical use and the economics of the production system is often lacking although it is important for application in practice.

  8. Activation analysis of ITER blanket first wall

    Energy Technology Data Exchange (ETDEWEB)

    Lopatkin, A.; Muratov, V. [RDIPE (NIKIET), Moscow (Russian Federation)

    1998-09-01

    To analyze the activation of ITER blanket structural components, the authors have prepared the AUCDAS code that calculates changes in nuclide concentrations and radioactivity characteristics during neutron irradiation and during cooling. UCDAS takes into account all neutron reactions and decay types, the prepared library of constants contains nuclear data of nuclides from hydrogen to californium. A comparative analysis of the results as obtained using UCDAS code and the widely known FISPACT code is given. The analysis of decay heat, gas generation and activity of ITER blanket first wall`s structural components was carried out. The beryllium coating, copper alloy and stainless steel were analysed. Calculations were performed for the first plasma burning pulse, 6 months and 1 year of operation in accordance with the ITER scenario. The materials recommended by ITER central team and their Russian analogs were considered: TGR and B1 (beryllium coating), GlidCop AL-25 Ds and Br-MKX (copper alloy), 316LN-IG and 12Cr18Ni10Ti (stainless steel). It has been demonstrated that there is a difference in all of the considered characteristics between the above materials. It is caused by impurities which are present in the materials. The report also considers the accumulation of gases (H, D, T, He{sup 3}, He{sup 4}) in the above materials. Besides, the change in the activity of irradiated materials during the cooling of up to 10{sup 7} years was calculated. (orig.) 7 refs.

  9. 75 FR 11557 - Woven Electric Blankets From China

    Science.gov (United States)

    2010-03-11

    ... either the electric blanket's wiring or a subassembly containing the electric blanket's wiring (e.g., wiring mounted on a substrate). A shell of woven fabric that is not packaged together, or in a kit, with...://www.usitc.gov ). The public record for this investigation may be viewed on the Commission's electronic...

  10. Advanced Electrochemical Machining (ECM) for tungsten surface micro-structuring in blanket applications

    Energy Technology Data Exchange (ETDEWEB)

    Holstein, Nils, E-mail: nils.holstein@kit.edu [Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Baden-Württemberg (Germany); Krauss, Wolfgang; Konys, Jürgen [Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Baden-Württemberg (Germany); Heuer, Simon; Weber, Thomas [Research Center Jülich, Institute of Energy- and Climate Research – Plasma Physics (IEK-4), D-52425 Jülich (Germany)

    2016-11-01

    Highlights: • Electrochemical Machining is an appropriate tool for tungsten shaping. • Progress in shaping achieved by combination of ECM with advanced micro-lithography. • Application in First Wall for connection of plasma facing material to breeder blanket. • Successful development of adhesion promotors by ECM for plasma spraying interlayers. • Microstructure electrochemical manufacturing of tungsten in sizes of 100 μm achieved. - Abstract: Plasma facing components for fusion applications must have to exhibit long-term stability under extreme physical conditions, and therefore any material imperfections caused by mechanical and/or thermal stresses in the shaping processes cannot be tolerated due to a high risk of possible technical failures under fusion conditions. To avoid such defects, the method of Electrochemical Machining (ECM) enables a complete defect-free processing of removal of tungsten material during the desired shaping, also for high penetration depths. Furthermore, supported by lithographic mask pretreatment, three-dimensional distinct geometric structures can be positive-imaged via the directional galvanic dissolution applying M-ECM process into the tungsten bulk material. New required applications for tungsten components, e.g. as adhesion promotors in W-surfaces to enable sure grip and bonding of thick plasma-spraying layers for blanket components, will define the way of further miniaturization of well-established millimeter dimensioned M-ECM shaping processes to dimensions of 100 μm and furthermore down to 50 μm. Besides current M-ECM limits the article describes inevitable needs of further developments for mask resists, mask materials and the resulting ECM parameters, to reach the needed accuracy in tungsten microstructure. The achieved progress and observed correlations of processing parameters will be manifested by produced demonstrators made by the new “μM”-ECM process.

  11. LMFBR Blanket Physics Project progress report No. 6

    Energy Technology Data Exchange (ETDEWEB)

    Driscoll, M.J. (ed.)

    1975-06-30

    Progress is summarized in experimental and analytical investigations of the neutronics and photonics of benchmark mockups of LMFBR blankets. During the reporting period work was devoted primarily to a wide range of analytical/numerical investigations, including blanket fuel management/economics studies, evaluation of improved blanket designs, and assessment of state-of-the-art methods for gamma heating calculations. Experimental work included preparations for resumption of MIT Reactor operations, primarily fabrication of improved steel reflector assemblies for blanket mockups, and development of an improved radiophotoluminescent readout device for LiF thermoluminescent detectors. The most significant finding was that the neutronic and economic performance of radial blanket assemblies are essentially independent of core size (rating) for radially-power-flattened cores. Hence the methodology and results of current experiments and calculations should be valid for the large commercial LMFBR's of the future.

  12. MIT LMFBR blanket research project. Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    Driscoll, M.J.

    1983-08-01

    This is a final summary report on an experimental and analytical program for the investigation of LMFBR blanket characteristics carried out at MIT in the period 1969 to 1983. During this span of time, work was carried out on a wide range of subtasks, ranging from neutronic and photonic measurements in mockups of blankets using the Blanket Test Facility at the MIT Research Reactor, to analytic/numerical investigations of blanket design and economics. The main function of this report is to serve as a resource document which will permit ready reference to the more detailed topical reports and theses issued over the years on the various aspects of project activities. In addition, one aspect of work completed during the final year of the project, on doubly-heterogeneous blanket configurations, is documented for the record.

  13. Aerosol Blanket Likely Thinned During 1990s

    Science.gov (United States)

    2007-01-01

    Each day, a blanket of tiny particles drifting through the Earth's atmosphere filters out some of the sunlight headed for the planet's surface. These aerosols, including dust, smoke, and human-produced pollution, can reflect incoming light or absorb it, directly affecting the Earth's energy balance and climate. Aerosols also influence the climate indirectly, by affecting the brightness and amount of clouds. Research by NASA scientists on global aerosol patterns since the 1990s indicate the global aerosol blanket has likely thinned, allowing more sunlight to reach the Earth's surface over the past decade. The thinning of the blanket is shown by this trio of images based on satellite observations of aerosol optical thickness, a measurement that scientists use to describe how much the aerosols filter the incoming sunlight. Higher optical thickness (orange and red) means more sunlight blocking. The globes show average aerosol optical thickness for 1988-1991 (top), 2002-2005 (middle), and the change between the two time periods (bottom). Overall, the 1988-1991 image appears redder, a sign that aerosols were blocking more incoming sunlight; the 2002-2005 image has more light yellow areas. In the bottom image, small pockets of red (increased aerosol optical thickness), mostly near land masses in the Northern Hemisphere, are far outnumbered by blue areas (decreased aerosol optical thickness). Because they block incoming sunlight from reaching Earth's surface, aerosols may counterbalance greenhouse gas warming. The decline in the dimming power of aerosols over the past decade may have made the greenhouse warming trend more evident in the past decade than in previous decades. The scientists describe their results as a 'likely' trend because the National Oceanic and Atmospheric Administration satellite sensors they used in their analysis were not specifically designed to observe aerosols, and may contain some errors. However, specific, major aerosol events, such as large

  14. Breeding zone models of DEMO ceramic helium cooled blanket test module for testing in IVV-2M reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kovalenko, V.; Kiryiak, L.; Lopatkin, A.; Marachev, A.; Muratov, V.; Strebkov, Yr. [Federal State Unitary Enterprise ' ' Dollezhal Research and Development Inst. of Power Engineering' ' , Moscow (Russian Federation); Davydov, D.; Kapyshev, V.; Kazennov, Yr.; Tebus, V. [Federal State Unitary Enterprise ' ' A.A. Bochvar All-Russia Research Inst. of Inorganic Materials' ' , Moscow (Russian Federation)

    2002-06-01

    The goal of DEMO ceramic helium cooled blanket test module (CHC BTM) is to demonstrate a breeding capability that would lead to tritium self-sufficiency in ITER reactor and to extract a high-grade heat suitable for electricity generation. Experimental validation of all the adopted design solutions is main important problem at design and calculation works carrying out in order to develop the CHC BTM. One important task for breeding zones feasibility validation is in-pile tests. Two models were developed and fabricated for testing in the fission IVV-2M reactor. Breeding zone is based on poloidal BIT-conception. The models structural material is ferrito-martensitic steel. Breeder material is lithium orthosilicate in pebble beds and pellet forms. Multiplier material is beryllium in pebble beds and porosity forms. The cooling is provided by helium at 10 MPa. The tritium produced in the breeder material is purged by the helium flow at 0.1-0.2 MPa. Designs of model description and experimental channel, results of neutronic and thermo-hydraulic calculations are presented in the paper. (orig.)

  15. Spacecraft thermal blanket cleaning: Vacuum bake of gaseous flow purging

    Science.gov (United States)

    Scialdone, John J.

    1990-01-01

    The mass losses and the outgassing rates per unit area of three thermal blankets consisting of various combinations of Mylar and Kapton, with interposed Dacron nets, were measured with a microbalance using two methods. The blankets at 25 deg C were either outgassed in vacuum for 20 hours, or were purged with a dry nitrogen flow of 3 cu. ft. per hour at 25 deg C for 20 hours. The two methods were compared for their effectiveness in cleaning the blankets for their use in space applications. The measurements were carried out using blanket strips and rolled-up blanket samples fitting the microbalance cylindrical plenum. Also, temperature scanning tests were carried out to indicate the optimum temperature for purging and vacuum cleaning. The data indicate that the purging for 20 hours with the above N2 flow can accomplish the same level of cleaning provided by the vacuum with the blankets at 25 deg C for 20 hours, In both cases, the rate of outgassing after 20 hours is reduced by 3 orders of magnitude, and the weight losses are in the range of 10E-4 gr/sq cm. Equivalent mass loss time constants, regained mass in air as a function of time, and other parameters were obtained for those blankets.

  16. Environmental Enrichment for Broiler Breeders: An Undeveloped Field

    DEFF Research Database (Denmark)

    Riber, Anja Brinch; Jong, Ingrid de; van de Werd, Heleen A.

    2017-01-01

    of environmental enrichment for broiler breeders, which have been described in the scientific literature, on behavior and welfare. Environmental enrichment is defined as an improvement of the environment of captive animals, which increases the behavioral opportunities of the animal and leads to improvements...... in biological function. This definition has been broadened to include practical and economic aspects as any enrichment strategy that adversely affects the health of animals (e.g., environmental hygiene), or that has too many economic or practical constraints will never be implemented on commercial farms...... and thus never benefit animals. Environmental enrichment for broiler breeders often has the purpose of satisfying the behavioral motivations for feeding and foraging, resting, and/or encouraging normal sexual behavior. Potentially successful enrichments for broiler breeders are elevated resting places...

  17. Dynamics and control of molten-salt breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sing, Vikram; Lish, Matthew R.; Chvala, Ondrej; Upadhyaya, Belle R. [Dept. of Nuclear Engineering, University of Tennessee, Knoxville (United States)

    2017-08-15

    Preliminary results of the dynamic analysis of a two-fluid molten-salt breeder reactor (MSBR) system are presented. Based on an earlier work on the preliminary dynamic model of the concept, the model presented here is nonlinear and has been revised to accurately reflect the design exemplified in ORNL-4528. A brief overview of the model followed by results from simulations performed to validate the model is presented. Simulations illustrate stable behavior of the reactor dynamics and temperature feedback effects to reactivity excursions. Stable and smooth changes at various nodal temperatures are also observed. Control strategies for molten-salt reactor operation are discussed, followed by an illustration of the open-loop load-following capability of the molten-salt breeder reactor system. It is observed that the molten-salt breeder reactor system exhibits “self-regulating” behavior, minimizing the need for external controller action for load-following maneuvers.

  18. Development of metal getter for in-situ irradiation test of fusion blanket

    Energy Technology Data Exchange (ETDEWEB)

    Futamura, Yoshiaki [Toyama Univ. (Japan). Hydrogen Isotope Research Center; Tsuchiya, Kunihiko; Imaizumi, Hideki; Wakisaka, Yuichi; Kabutomori, Toshiki; Kawamura, Hiroshi

    1995-03-01

    In-situ irradiation test of fusion blanket is planned in JMTR using lithium ceramics and beryllium as tritium breeders and neutron multipliers, and it is necessary for the recovery of tritium gas to develop metal getters. Characteristics of several materials were estimated and Zr{sub 9}Ni{sub 11} alloy, chosen in the report, was one candidate for a metal getter. It has a variety of advantages as compared to other metal getters: (1) Good characteristics similar to uranium (U), (2) Easy to handle, (3) Incombustible materials. Zr{sub 9}Ni{sub 11} alloy was fabricated and the equilibrium dissociation pressure of hydrogen was measured and evaluated on amounts of hydrogen absorption (H/M) at 20, 100, 200 and 300degC. It was evident from this measurement that Zr{sub 9}Ni{sub 11} alloy had broad and stable plateaus when H/M was more than 0.33 (50 cm{sup 3}/g). The equilibrium dissociation pressure of Zr{sub 9}Ni{sub 11} alloy was less than 10{sup -4} Pa within H/M=0.13 (20 cm{sup 3}/g). These results thus show Zr{sub 9}Ni{sub 11} alloy to be a preferable material for recovery of tritium gas. (author).

  19. Prevalence of Campylobacter jejuni in poultry breeder flocks

    Directory of Open Access Journals (Sweden)

    Ludovico Dipineto

    2010-01-01

    Full Text Available The aim of this work is to present the preliminary results of a study about the prevalence of Campylobacter jejuni in poultry breeder flocks. It was examined three different breeder flocks of Bojano in Molise region. A total of 360 cloacal swabs and 80 enviromental swabs was collected. Of the 3 flocks studied, 6.9% tested were positive for Campylobacter spp. The most-prevalent isolated species is C. jejuni (8.2%. Only 3 of the 360 cloacal swabs samples examined were associated with C. coli. The environmental swabs resulted negative. This results confirms again that poultry is a reservoir of this germ.

  20. Application OF LIBS To Estimate The Age Of Broiler Breeders

    Science.gov (United States)

    Salam, Z. Abdel; Harith, M. A.

    2011-09-01

    Laser Induced Breakdown Spectroscopy (LIBS) is a well-known spectrochemical elemental analysis technique. In our investigations of the LIBS spectra it has been found that there is a remarkable correlation between the ionic to atomic spectral lines emission ratio and the surface hardness of eggshell for two Different Broiler Breeder at different age. The proposed technique has been applied successfully in poultry science to estimate the age of broiler breeders by measuring the surface hardness of their eggshell. The experiments have been performed on two different strains, Arbor Acres plus (AAP) and Hubard Classic (HC), and the results were satisfactory.

  1. Pebble fabrication and tritium release properties of an advanced tritium breeder

    Energy Technology Data Exchange (ETDEWEB)

    Hoshino, Tsuyoshi, E-mail: hoshino.tsuyoshi@jaea.go.jp [Breeding Functional Materials Development Group, Department of Blanket Systems Research, Rokkasho Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency, 2-166 Obuch, Omotedate, Rokkasho-mura, Kamikita-gun, Aomori 039-3212 (Japan); Edao, Yuki [Tritium Technology Group, Department of Blanket Systems Research, Rokkasho Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency, 2-4 Shirakata, Shirane, Tokai-mura, Naka-gun, Ibaraki 319-1195 (Japan); Kawamura, Yoshinori [Blanket Technology Group, Department of Blanket Systems Research, Rokkasho Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Ochiai, Kentaro [BA Project Coordination Group, Department of Fusion Power Systems Research, Rokkasho Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency, 2-166 Obuch, Omotedate, Rokkasho-mura, Kamikita-gun, Aomori 039-3212 (Japan)

    2016-11-01

    Highlights: • Li{sub 2}TiO{sub 3} with excess Li (Li{sub 2+x}TiO{sub 3+y}) pebble as an advanced tritium breeders was fabricated using emulsion method. • Grain size of Li{sub 2+x}TiO{sub 3+y} pebbles was controlled to be less than 5 μm. • Li{sub 2+x}TiO{sub 3+y} pebbles exhibited good tritium release properties similar to that of Li{sub 2}TiO{sub 3} pebbles. - Abstract: Li{sub 2}TiO{sub 3} with excess Li (Li{sub 2+x}TiO{sub 3+y}) has been developed as an advanced tritium breeder. With respect to the tritium release characteristics of the blanket, the optimum grain size after sintering was less than 5 μm. Therefore, an emulsion method was developed to fabricate pebbles with this target grain size. The predominant factor affecting grain growth was assumed to be the presence of binder in the gel particles; this remaining binder was hypothesized to react with the excess Li, thereby generating Li{sub 2}CO{sub 3}, which promotes grain growth. To inhibit the generation of Li{sub 2}CO{sub 3}, calcined Li{sub 2+x}TiO{sub 3+y} pebbles were sintered under vacuum and subsequently under a 1% H{sub 2}–He atmosphere. The average grain size of the sintered Li{sub 2+x}TiO{sub 3+y} pebbles was less than 5 μm. Furthermore, the tritium release properties of Li{sub 2+x}TiO{sub 3+y} pebbles were evaluated, and deuterium–tritium (DT) neutron irradiation experiments were performed at the Fusion Neutronics Source facility in the Japan Atomic Energy Agency. To remove the tritium produced by neutron irradiation, 1% H{sub 2}–He purge gas was passed through the Li{sub 2+x}TiO{sub 3+y} pebbles. The Li{sub 2+x}TiO{sub 3+y} pebbles exhibited good tritium release properties, similar to those of Li{sub 2}TiO{sub 3} pebbles. In particular, the released amount of tritiated hydrogen gas for easier tritium handling was greater than the released amount of tritiated water.

  2. Simulation and design of an electron beam ion source charge breeder for the californium rare isotope breeder upgrade

    Directory of Open Access Journals (Sweden)

    Clayton Dickerson

    2013-02-01

    Full Text Available An electron beam ion source (EBIS will be constructed and used to charge breed ions from the californium rare isotope breeder upgrade (CARIBU for postacceleration into the Argonne tandem linear accelerator system (ATLAS. Simulations of the EBIS charge breeder performance and the related ion transport systems are reported. Propagation of the electron beam through the EBIS was verified, and the anticipated incident power density within the electron collector was identified. The full normalized acceptance of the charge breeder with a 2 A electron beam, 0.024π  mm mrad for nominal operating parameters, was determined by simulating ion injection into the EBIS. The optics of the ion transport lines were carefully optimized to achieve well-matched ion injection, to minimize emittance growth of the injected and extracted ion beams, and to enable adequate testing of the charge bred ions prior to installation in ATLAS.

  3. Advanced Acoustic Blankets for Improved Aircraft Interior Noise Reduction Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of the proposed Phase II research effort is to develop heterogeneous (HG) blankets for improved sound reduction in aircraft structures. Phase I...

  4. Fusion blanket for high-efficiency power cycles

    Energy Technology Data Exchange (ETDEWEB)

    Usher, J.L.; Powell, J.R.; Fillo, J.A.; Horn, F.L.; Lazareth, O.W.; Taussig, R.

    1980-01-01

    The efficiencies of blankets for fusion reactors are usually in the range of 30 to 40%, limited by the operating temperature (500/sup 0/C) of conventional structural materials such as stainless steels. In this project two-zone blankets are proposed; these blankets consist of a low-temperature shell surrounding a high-temperature interior zone. A survey of nucleonics and thermal hydraulic parameters has led to a reference blanket design consisting of a water-cooled stainless steel shell around a BeO, ZrO/sub 2/ interior (cooled by Ar) utilizing Li/sub 2/O for tritium breeding. In this design, approx. 60% of the fusion energy is deposited in the high-temperature interior. The maximum Ar temperature is 2230/sup 0/C leading to an overall efficiency estimate of 55 to 60% for this reference case.

  5. Advanced Acoustic Blankets for Improved Aircraft Interior Noise Reduction Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this project advanced acoustic blankets for improved low frequency interior noise control in aircraft will be developed and demonstrated. The improved performance...

  6. Lightweight IMM Multi-Junction Photovoltaic Flexible Blanket Assembly Project

    Data.gov (United States)

    National Aeronautics and Space Administration — DSS's recently completed successful NASA SBIR Phase 1 program has established a TRL 3/4 classification for an innovative IMM PV Integrated Modular Blanket Assembly...

  7. Thin Thermal-Insulation Blankets for Very High Temperatures

    Science.gov (United States)

    Choi, Michael K.

    2003-01-01

    Thermal-insulation blankets of a proposed type would be exceptionally thin and would endure temperatures up to 2,100 C. These blankets were originally intended to protect components of the NASA Solar Probe spacecraft against radiant heating at its planned closest approach to the Sun (a distance of 4 solar radii). These blankets could also be used on Earth to provide thermal protection in special applications (especially in vacuum chambers) for which conventional thermal-insulation blankets would be too thick or would not perform adequately. A blanket according to the proposal (see figure) would be made of molybdenum, titanium nitride, and carbon- carbon composite mesh, which melt at temperatures of 2,610, 2,930, and 2,130 C, respectively. The emittance of molybdenum is 0.24, while that of titanium nitride is 0.03. Carbon-carbon composite mesh is a thermal insulator. Typically, the blanket would include 0.25-mil (.0.00635-mm)-thick hot-side and cold-side cover layers of molybdenum. Titanium nitride would be vapor-deposited on both surfaces of each cover layer. Between the cover layers there would be 10 inner layers of 0.15-mil (.0.0038-mm)-thick molybdenum with vapor-deposited titanium nitride on both sides of each layer. The thickness of each titanium nitride coat would be about 1,000 A. The cover and inner layers would be interspersed with 0.25-mil (0.00635-mm)-thick layers of carbon-carbon composite mesh. The blanket would have total thickness of 4.75 mils (approximately equal to 0.121 mm) and an areal mass density of 0.7 kilograms per square meter. One could, of course, increase the thermal- insulation capability of the blanket by increasing number of inner layers (thereby unavoidably increasing the total thickness and mass density).

  8. Quantitative feed restriction of Pekin breeder ducks during the ...

    African Journals Online (AJOL)

    Quantitative feed restriction of Pekin breeder ducks during the rearing period and its effect on subsequent productivity. M.D. Olver. Animal and Dairy Science Research Institute, Irene. Six male and 24 female Pekin ducks per pen were randomly allocated to 12pens to test the effects of quantitative feed restriction during the ...

  9. Semen bacterial flora of Rhode Island Breeder cocks in Zaria ...

    African Journals Online (AJOL)

    The semen used in this study was collected from 77 Rhode Island Breeder cocks reared in battery cages under intensive management from a private farm in Zaria, Kaduna State, Nigeria using the back massage procedure, 27 of the 77 semen samples (35.1%) contained bacterial isolates. None of the samples grew fungi.

  10. The response of broiler breeder hens to dietary balanced protein ...

    African Journals Online (AJOL)

    Two basal feeds (118 and 175 g protein/kg) with similar balanced amino acid mixtures were appropriately blended to produce six experimental diets differing in protein. These were fed for six weeks to 180 broiler breeder hens (Ross 308) housed in individual cages from 26 w of age. A 13 h photoperiod was applied. Half the ...

  11. Environmental Enrichment for Broiler Breeders: An Undeveloped Field

    NARCIS (Netherlands)

    Riber, Anja B.; Jong, de Ingrid; Weerd, van de Heleen A.; Steenfeldt, Sanna

    2017-01-01

    Welfare problems, such as hunger, frustration, aggression, and abnormal sexual behavior, are commonly found in broiler breeder production. To prevent or reduce these welfare problems, it has been suggested to provide stimulating enriched environments. We review the effect of the different types of

  12. Impact of nutrition on welfare aspects of broiler breeder flocks

    NARCIS (Netherlands)

    Krimpen, van M.M.; Jong, de I.C.

    2014-01-01

    To ensure health and reproductive performance, broiler breeders are feed restricted during the rearing period and, to a lesser extent, during the production period. Although restricted feeding improves health and bird welfare, on the other hand the birds are chronically hungry and suffer from

  13. Feeding broiler breeder flocks in relation to bird welfare aspects

    NARCIS (Netherlands)

    Jong, de I.C.; Krimpen, van M.M.

    2011-01-01

    To ensure health and reproductive capacity of the birds, broiler breeders are fed restricted during the rearing period, and to a lesser extent also during the production period. Although restricted feeding improves health and thereby bird welfare, on the other hand the birds are chronically hungry

  14. Response of Japanese Breeder Quails to Varying Dietary Protein ...

    African Journals Online (AJOL)

    A three months feeding trial was conducted to assess the effects of feeding varying levels of dietary protein on productive performance, egg quality characteristics and hatchability using 930 six weeks breeders quails. The birds were randomly divided into five dietary treatment groups of 186 birds, and were further replicated ...

  15. Development of fuels and structural materials for fast breeder reactors

    Indian Academy of Sciences (India)

    Fast breeder reactors (FBRs) are destined to play a crucial role inthe Indian nuclear power programme in the foreseeable future. FBR technology involves a multi-disciplinary approach to solve the various challenges in the areas of fuel and materials development. Fuels for FBRs have significantly higher concentration of ...

  16. Overview of pool hydraulic design of Indian prototype fast breeder ...

    Indian Academy of Sciences (India)

    Computational Fluid Dynamics (CFD) plays a critical role in the design of pool type reactors and becomes an increasingly popular tool, thanks to the advancements in computing technology. In this paper, thermal hydraulic characteristics of a fast breeder reactor, design limits and challenging thermal hydraulic investigations ...

  17. Multiple recycling of fuel in prototype fast breeder reactor

    Indian Academy of Sciences (India)

    In the FBR closed fuel cycle, possibility of multi-recycle has been recognized. In the present study, Pu-239 equivalence approach is used to demonstrate the feasibility of achieving near constant input inventory of Pu and near stable Pu isotopic composition after a few recycles of the same fuel of the prototype fast breeder ...

  18. Feeding broiler breeders to improve their welfare whilst maintaining productivity

    DEFF Research Database (Denmark)

    Steenfeldt, Sanna; Nielsen, Birte Lindstrøm

    of their litter may have affected their thermoregulation. This experiment indicates that high fibre diets can alleviate the feeling of hunger currently experienced by broiler breeders, and a high ratio of insoluble fibre can reduce stereotypies and may improve the well-being of the birds....

  19. Utilisation of synthetic amino acids by broiler breeder hens | Nonis ...

    African Journals Online (AJOL)

    This study was conducted to examine the response of broiler breeder hens to feeds supplemented with synthetic lysine and methionine when fed once or twice daily during peak production. Replacing intact protein with increasing amounts of free lysine and methionine, up to 2.3 g/kg feed, had no effect on feed intake, ...

  20. Vaccination Strategies in Breeder and Commercial Farms and ...

    African Journals Online (AJOL)

    In Nigeria infectious bursal disease (IBD) outbreaks have persisted despite routine vaccination. In a quest to determine some of the causes of the vaccination failures, the type of vaccines, vaccination schedules and seromonitoring for antibodies in breeder and commercial farms were investigated using structured ...

  1. Feeding Programs for Broiler Breeders in the Start Phase

    Directory of Open Access Journals (Sweden)

    J Tremarin

    Full Text Available ABSTRACT The fast-growing Brazilian aviculture requires studies to improve zootechnical performance indexes for broiler breeders. The purpose of this study was to assess different feeding programs for broiler breeders on performance and development of digestive organs. A total of 48,000, 1d-old, Cobb 500 broiler breeders were divided into two sheds with 24,000 birds each. The experiment was randomized in block design, considering each shed a block, with 4 treatments and 6 replications per treatment with 2,000 birds in each. Treatments consisted of: Shed 1 T1 = starter feed; T2 = T1 + probiotics; Shed 2 T3 = pre-starter feed; T4 = T3 + probiotics. The productive performance characteristics (bird weight, weight gain, feed intake and feed conversion, the development of digestive organs (gizzard, proventriculus, spleen, bursa of Fabricius and small bowel as well as the small bowel length were assessed weekly for all experimental groups, in samples of 10 birds per treatment. The best feed conversion and weight gain were observed with pre-starter feed in the first 7 days of age, with or without probiotic. Small bowel, gizzard and proventriculus development at 28 days was better for birds on pre-starter feed compared to those on starter feed alone. It is possible to conclude that broiler breeders on pre-starter feed during the first 7 days of age are likely to show better physical and productive performances in the adult phase.

  2. Snowstorm Blankets Midwestern U.S.

    Science.gov (United States)

    2002-01-01

    An early blast of wintry weather swept across the midwestern United States on November 27-28, 2001, leaving a wide swath of snow and ice on the ground extending from northern Texas up into the Dakotas and as far east as Michigan. Two inches of snow accumulated in the Texas panhandle while sleet and freezing rain glazed bridges and roads as far south as the Dallas-Fort Worth area. Meanwhile, more than 2 feet (0.61 meters) of snow fell in parts of the Dakotas, Wisconsin and Michigan. The town of Willmar, Minnesota, recorded an accumulation of 29 inches (74 cm) of snow. By December 1, the clouds had cleared enough to afford the Moderate-resolution Imaging Spectroradiometer (MODIS) this true-color view of the midwest. The wide swath of white snow, contrasted with the brownish colors of the bare surface, reveals the extent of the region affected by the snowstorm. This scene spans from Ontario, Canada, and Minnesota (upper right) westward across the Dakotas and Montana (upper left). Moving southward, we see the storm blanketed half of Nebraska and the northeast corner of Colorado (lower left). The Missouri River can be seen clearly winding its way southeastward through South Dakota. The Missouri also defines the border between Nebraska and Iowa. The Minnesota River can also be seen in southwestern Minnesota. Image courtesy Jacques Descloitres, MODIS Land Rapid Response Team at NASA GSFC

  3. Studies on serum macro and micro minerals status in repeat breeder ...

    African Journals Online (AJOL)

    ... 87%; whereas in repeat breeder control buffaloes, the overall pregnancy rate was 21%. In conclusion, the concentrations of macro and micro minerals were significantly lower in repeat breeder buffaloes and mineral mixtures should be added in the food stuff to improve reproductive efficiency of repeat breeder buffaloes.

  4. ORNL breeder reactor safety quarterly technical progress report, July-September 1980

    Energy Technology Data Exchange (ETDEWEB)

    Fontana, M H; Wantland, J L

    1981-01-01

    Six tasks are reported upon: THORS (Thermal-Hydraulic Out-of-Reactor Safety) program, environmental assessment of alternate FBR fuels, model evaluation of breeder reactor radioactivity releases, nuclear safety information center activities, breeder reactor reliability data analysis center activities, and central data base for breeder reactor safety codes. (DLC)

  5. Economic and welfare benefits of environmental enrichment for broiler breeders.

    Science.gov (United States)

    Leone, E H; Estévez, I

    2008-01-01

    Designs to enrich the environment are crucial in the effort to fully address the biological needs of domestic animals. Although enrichment programs have been shown to improve health and welfare, little is known of their potential for application to commercial broiler breeder environments. We investigated the potential benefits of cover panels for broiler breeder reproductive performance in a commercial setting. This demonstration trial occurred on 5 commercial broiler breeder farms, each with a control and panel treatment room containing approximately 7,000 females and 800 males. Reproductive performance was measured from 25 to 60 wk by the number of eggs laid per female per week as well as weekly fertility and hatchability rates. The location of marked males was recorded weekly to quantify male movement. Access to cover panels improved egg production by 2.1% and maintained better hatchability and fertility throughout the breeding cycle (significant interactions of age and panel treatment) leading to an additional 4.5 chicks/female. Male home ranges, based on minimum convex polygons, were larger in the enriched (259 +/- 24.4 m(2)) vs. control flocks (184 +/- 23.1 m(2)). Providing enrichment in the form of cover panels improved reproductive performance, most likely by increasing males' mating opportunities and reducing female stress. We found a clear economic benefit to providing enrichment, an estimated $3 million if all breeder houses within the participating company were outfitted with the panels. These results demonstrate that environmental enrichment is not only beneficial for broiler breeder welfare, but can also be economically advantageous, resulting in a win-win situation for poultry welfare and production.

  6. APT Blanket System Loss-of-Helium-Gas Accident Based on Initial Conceptual Design - Helium Supply Rupture into Blanket Module

    Energy Technology Data Exchange (ETDEWEB)

    Hamm, L.L.

    1998-10-07

    The model results are used to determine if beam power shutdown is necessary (or not) as a result of the LOHGA accident to maintain the blanket system well below any of the thermal-hydraulic constraints imposed on the design. The results also provide boundary conditions to the detailed bin model to study the detailed temperature response of the hot blanket module structure. The results for these two cases are documented in the report.

  7. The European ITER test blanket modules: Progress in development of fabrication technologies towards standardization

    Energy Technology Data Exchange (ETDEWEB)

    Zmitko, Milan, E-mail: milan.zmitko@f4e.europa.eu [Fusion for Energy (F4E), Josep Pla 2, Barcelona (Spain); Thomas, Noël [ATMOSTAT, F-94815 Villejuif (France); LiPuma, Antonella; Forest, Laurent [CEA-Saclay, DEN, DM2S, SEMT, F-91191 Gif-sur-Yvette (France); Cogneau, Laurence [CEA-DRT, 38000 Grenoble (France); Rey, Jörg; Neuberger, Heiko [Karlsruhe Institute of Technology (KIT), Postfach 3640, Karlsruhe (Germany); Poitevin, Yves [Fusion for Energy (F4E), Josep Pla 2, Barcelona (Spain)

    2016-11-01

    Highlights: • Significant progress on the development of welding procedures for European TBM achieved. • Fabrication processes feasibility based on diffusion and fusion welding demonstrated. • An optimized welding scenario/sequence for TBM box assembly identified. • Future qualification of pF/WPS proposed through realization of a number of QMUs. - Abstract: The paper reviews progress achieved in development of fabrication technologies and procedures applied for manufacturing of the TBM sub-components, like, HCLL and HCPB cooling plates, HCLL/HCPB stiffening plates, and HCLL/HCPB first wall and side caps. The used technologies are based on fusion and diffusion welding techniques taking into account specificities of the EUROFER97 steel. Development of a standardized procedure complying with professional codes and standards (RCC-MRx), a preliminary fabrication/welding procedure specification (pF/WPS), is described based on fabrication and non-destructive and destructive characterization of feasibility mock-ups (FMU) aimed at assessing the suitability of a fabrication process for fulfilling the design and fabrication specifications. The main FMUs characterization results are reported (e.g. pressure resistance and helium leak tightness tests, mechanical properties and microstructure at the weld joints, geometrical characteristics of the sub-components and internal cooling channels) and the key pF/WPS steps and parameters are outlined. Also, fabrication procedures for the TBM box assembly are presently under development for the establishment of an optimized assembly sequence/scenario and development of standardized welding procedure specifications. In conclusions, further steps towards the pF/WPS qualification are briefly discussed.

  8. Accelerator breeder nuclear fuel production: concept evaluation of a modified design for ORNL's proposed TME-ENFP

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, J.O.; Gabriel, T.A.; Bartine, D.E.

    1985-01-01

    Recent advances in accelerator beam technology have made it possible to improve the target/blanket design of the Ternary Metal Fueled Electronuclear Fuel Producer (TMF-ENFP), an accelerator-breeder design concept proposed by Burnss et al. for subcritical breeding of the fissile isotope /sup 233/U. In the original TMF-ENFP the 300-mA, 1100-MeV proton beam was limited to a small diameter whose power density was so high that a solid metal target could not be used for producing the spallation neutrons needed to drive the breeding process. Instead the target was a central column of circulating liquid sodium, which was surrounded by an inner multiplying region of ternary fuel rods (/sup 239/Pu, /sup 232/Th, and /sup 238/U) and an outer blanket region of /sup 232/Th rods, with the entire system cooled by circulating sodium. In the modified design proposed here, the proton beam is sufficiently spread out to allow the ternary fuel to reside directly in the beam and to be preceded by a thin (nonstructural) V-Ti steel firThe spread beam mandated a change in the design configuration (from a cylindrical shape to an Erlenmeyer flask shape), which, in turn, required that the fuel rods (and blanket rods) be replaced by fuel pebbles. The fuel residence time in both systems was assumed to be 90 full power days. A series of parameter optimization calculations for the modified TMF-ENFP led to a semioptimized system in which the initial /sup 239/Pu inventory of the ternary fuel was 6% and the fuel pebble diameter was 0.5 cm. With this system the /sup 233/Pu production rate of 5.8 kg/day reported for the original TMF-ENFP was increased to 9.3 kg/day, and the thermal power production at beginning of cycle was increased from 3300 MW(t) to 5240 MW(t). 31 refs., 32 figs., 6 tabs.

  9. The International Breeder's Rights System and Crop Plant Innovation.

    Science.gov (United States)

    Barton, J H

    1982-06-04

    Legal arrangements governing a plant breeder's intellectual property rights to his inventions are likely to affect the future of crop research. Such systems, although controversial, are probably currently desirable for the developed world. The new genetic technologies may change this judgment, and certainly require redefinition of the lines between plant patents and regular patents. Several safeguards, present in the United States breeder's rights law, should be applied more broadly. A new safeguard-of ensuring that material be entered into germplasm banks-should be applied everywhere. For the developing world, the desirability of a plant patent system is much less clear; new agreements may be desirable to ensure the free flow and collection of germplasm.

  10. Fuel Summary Report: Shippingport Light Water Breeder Reactor - Rev. 2

    Energy Technology Data Exchange (ETDEWEB)

    Olson, Gail Lynn; Mc Cardell, Richard Keith; Illum, Douglas Brent

    2002-09-01

    The Shippingport Light Water Breeder Reactor (LWBR) was developed by Bettis Atomic Power Laboratory to demonstrate the potential of a water-cooled, thorium oxide fuel cycle breeder reactor. The LWBR core operated from 1977-82 without major incident. The fuel and fuel components suffered minimal damage during operation, and the reactor testing was deemed successful. Extensive destructive and nondestructive postirradiation examinations confirmed that the fuel was in good condition with minimal amounts of cladding deformities and fuel pellet cracks. Fuel was placed in wet storage upon arrival at the Expended Core Facility, then dried and sent to the Idaho Nuclear Technology and Engineering Center for underground dry storage. It is likely that the fuel remains in good condition at its current underground dry storage location at the Idaho Nuclear Technology and Engineering Center. Reports show no indication of damage to the core associated with shipping, loading, or storage.

  11. The Effect of Degree of Photostimulation on Male Broiler Breeder ...

    African Journals Online (AJOL)

    Nicky

    Abstract. The effect of photostimulation of male broiler breeders (n = 144) to different photoperiods (8-h control and 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13, 14 and 18 h) applied at 20 weeks of age, on age at first semen production, testis weights, as predicted by comb area, and semen characteristics at the reported age at first.

  12. Direct LiT Electrolysis in a Metallic Fusion Blanket

    Energy Technology Data Exchange (ETDEWEB)

    Olson, Luke [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-09-30

    A process that simplifies the extraction of tritium from molten lithium-based breeding blankets was developed. The process is based on the direct electrolysis of lithium tritide using a ceramic Li ion conductor that replaces the molten salt extraction step. Extraction of tritium in the form of lithium tritide in the blankets/targets of fusion/fission reactors is critical in order to maintain low concentrations. This is needed to decrease the potential tritium permeation to the surroundings and large releases from unforeseen accident scenarios. Extraction is complicated due to required low tritium concentration limits and because of the high affinity of tritium for the blanket. This work identified, developed and tested the use of ceramic lithium ion conductors capable of recovering hydrogen and deuterium through an electrolysis step at high temperatures.

  13. Direct Lit Electrolysis In A Metallic Lithium Fusion Blanket

    Energy Technology Data Exchange (ETDEWEB)

    Colon-Mercado, H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Babineau, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Elvington, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Garcia-Diaz, B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Teprovich, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Vaquer, A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-10-13

    A process that simplifies the extraction of tritium from molten lithium based breeding blankets was developed.  The process is based on the direct electrolysis of lithium tritide using a ceramic Li ion conductor that replaces the molten salt extraction step. Extraction of tritium in the form of lithium tritide in the blankets/targets of fission/fusion reactors is critical in order to maintained low concentrations.  This is needed to decrease the potential tritium permeation to the surroundings and large releases from unforeseen accident scenarios. Because of the high affinity of tritium for the blanket, extraction is complicated at the required low levels. This work identified, developed and tested the use of ceramic lithium ion conductors capable of recovering the hydrogen and deuterium thru an electrolysis step at high temperatures. 

  14. Comparison of the Tritium permeated from ITER Blanket in normal operation and its short range impact of HT over France, Swiss or Spain

    Energy Technology Data Exchange (ETDEWEB)

    Castro, P.; Velarde, M.; Ardao, J.; Perlado, J.; Sedano, L.; Xiberta, J.

    2015-07-01

    In this paper we assumes the hydrogen isotopes permeation from a liquid metal ITER breeder blanket (assuming normal operation and a LM as DCLL or HCLL blanket) as one of the possible sources of a leak and tritium release,mainly but not only. The paper presents a short range low impact of HT gas activity over France, Swiss or Spain from same cases in 2014 and 2015 releases from ITER. The permeation of hydrogen isotopes is an important experimental issue to take into account into the development of a Tritium Breeder Module for ITER [1]. Tritium cannot be confined -without an uncertainty of 5% in the flux permeation- and therefore HT can be detected (e.g. by ionization chamber) as permeates though the structure of RAFM steel towards the coolant [1]. HT from Pb15.7Li and permeated in Eurofer97 can contaminate the other parts of the system and may be delivered though the normal-vent detritiation system (NVDS). Real time forecast of transport of tritium in air from the fusion reactor towards off-site far downwind though extended tritium clouds into the low levels of the atmosphere is calculated for the short range (up to 24 hours) by the coupling of 2 models the European Centre for Medium Range Weather Forecast (ECMWF) [2] model and the FLEXPART lagrangian dispersion model [3] verified with NORMTRI simulation [4] and implemented in many different cases and scenarios [5, 6, 7]. As a function of daily weather conditions the release will affect just France or already can be delivered towards Swiss when cyclonic circulation, or towards the Iberian Peninsula or Balearic Islands (Spain) when high produce anticyclonic circulation of the air over the Mediterranean Sea. (Author)

  15. 78 FR 26360 - Dominion Transmission Inc.; Prior Notice Activity Under Blanket Certificate

    Science.gov (United States)

    2013-05-06

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Dominion Transmission Inc.; Prior Notice Activity Under Blanket Certificate... blanket certificate issued in Docket No. G-1391. Dominion seeks authorization to replace pipeline...

  16. Neutronic analysis of a dual He/LiPb coolant breeding blanket for DEMO

    OpenAIRE

    Catalán, J.P.; Ogando Serrano, Francisco; Sanz Gonzalo, Javier; Palermo, I.; Veredas, G.; Gómez Ros, J.M.; Sedano, L.

    2010-01-01

    A conceptual design of a DEMO fusion reactor is being developed under the Spanish Breeding Blanket Technology Programme: TECNO_FUS based on a He/LiPb dual coolant blanket as reference design option. The following issues have been analyzed to address the demonstration of the neutronic reliability of this conceptual blanket design: power amplification capacity of the blanket, tritium breeding capability for fuel self-sufficiency, power deposition due to nuclear heating in superconducting coils ...

  17. Design requirement on KALIMER blanket fuel assembly duct

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Woan; Kang, H. Y.; Nam, C.; Kim, J. O

    1998-03-01

    This document describes design requirements which are needed for designing the blanket fuel assembly duct of the KALIMER as design guidance. The blanket fuel assembly duct of the KALIMER consists of fuel rods, mounting rail, nosepiece, duct with pad, handling socket with pad. Blanket fuel rod consists of top end plug, bottom end plug with solid ferritic-martensitic steel rod and key way blanket fuel slug, cladding, and wire wrap. In the assembly, the rods are in a triangular pitch array, and the rod bundle is attached to the nosepiece with mounting rails. The bottom end of the assembly duct is formed by a long nosepiece which provides the lower restraint function and the paths for coolant inlet. This report contains functional requirements, performance and operational requirements, interfacing systems requirements, core restraint and interface requirements, design limits and strength requirements, system configuration and essential feature requirements, seismic requirements, structural requirements, environmental requirements, reliability and safety requirements, standard and codes, QA programs, and other requirements. (author). 20 refs., 4 figs.

  18. Optimization of up-flow anaerobic sludge blanket reactor for ...

    African Journals Online (AJOL)

    aghomotsegin

    2013-06-05

    Jun 5, 2013 ... Key words: Composite wastewater, up-flow anaerobic sludge blanket (UASB), anaerobic biological treatment, biogas, granulated anaerobic ... collected from the top of the reactor to a flexible water-filled gasholder fitted with .... changes in microbial diversity in biogranules in response to changes in nature ...

  19. Thermal-hydraulic analysis of low activity fusion blanket designs

    Energy Technology Data Exchange (ETDEWEB)

    Fillo, J A; Powell, J; Yu, W S

    1977-01-01

    The heat transfer aspects of fusion blankets are considered where: (a) conduction and (b) boiling and condensation are the dominant heat transfer mechanisms. In some cases, unique heat transfer problems arise and additional heat transfer data and analyses may be required.

  20. First-wall/blanket materials selection for STARFIRE tokamak reactor

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D.L.; Mattas, R.F.; Clemmer, R.G.; Davis, J.W.

    1980-01-01

    The development of the reference STARFIRE first-wall/blanket design involved numerous trade-offs in the materials selection process for the breeding material, coolant structure, neutron multiplier, and reflector. The major parameters and properties that impact materials selection and design criteria are reviewed.

  1. Selection of Breeding Stock among Australian Purebred Dog Breeders, with Particular Emphasis on the Dam

    Directory of Open Access Journals (Sweden)

    Veronika Czerwinski

    2016-11-01

    Full Text Available Every year, thousands of purebred domestic dogs are bred by registered dog breeders. Yet, little is known about the rearing environment of these dogs, or the attitudes and priorities surrounding breeding practices of these dog breeders. The objective of this study was to explore some of the factors that dog breeders consider important for stock selection, with a particular emphasis on issues relating to the dam. Two-hundred and seventy-four Australian purebred dog breeders, covering 91 breeds across all Australian National Kennel Club breed groups, completed an online survey relating to breeding practices. Most breeders surveyed (76% reported specialising in one breed of dog, the median number of dogs and bitches per breeder was two and three respectively, and most breeders bred two litters or less a year. We identified four components, relating to the dam, that were considered important to breeders. These were defined as Maternal Care, Offspring Potential, Dam Temperament, and Dam Genetics and Health. Overall, differences were observed in attitudes and beliefs across these components, showing that there is variation according to breed/breed groups. In particular, the importance of Maternal Care varied according to dog breed group. Breeders of brachycephalic breeds tended to differ the most in relation to Offspring Potential and Dam Genetics and Health. The number of breeding dogs/bitches influenced breeding priority, especially in relation to Dam Temperament, however no effect was found relating to the number of puppies bred each year. Only 24% of breeders used their own sire for breeding. The finding that some breeders did not test for diseases relevant to their breed, such as hip dysplasia in Labrador Retrievers and German Shepherds, provides important information on the need to educate some breeders, and also buyers of purebred puppies, that screening for significant diseases should occur. Further research into the selection of breeding dams

  2. Selection of Breeding Stock among Australian Purebred Dog Breeders, with Particular Emphasis on the Dam.

    Science.gov (United States)

    Czerwinski, Veronika; McArthur, Michelle; Smith, Bradley; Hynd, Philip; Hazel, Susan

    2016-11-16

    Every year, thousands of purebred domestic dogs are bred by registered dog breeders. Yet, little is known about the rearing environment of these dogs, or the attitudes and priorities surrounding breeding practices of these dog breeders. The objective of this study was to explore some of the factors that dog breeders consider important for stock selection, with a particular emphasis on issues relating to the dam. Two-hundred and seventy-four Australian purebred dog breeders, covering 91 breeds across all Australian National Kennel Club breed groups, completed an online survey relating to breeding practices. Most breeders surveyed (76%) reported specialising in one breed of dog, the median number of dogs and bitches per breeder was two and three respectively, and most breeders bred two litters or less a year. We identified four components, relating to the dam, that were considered important to breeders. These were defined as Maternal Care, Offspring Potential, Dam Temperament, and Dam Genetics and Health. Overall, differences were observed in attitudes and beliefs across these components, showing that there is variation according to breed/breed groups. In particular, the importance of Maternal Care varied according to dog breed group. Breeders of brachycephalic breeds tended to differ the most in relation to Offspring Potential and Dam Genetics and Health. The number of breeding dogs/bitches influenced breeding priority, especially in relation to Dam Temperament, however no effect was found relating to the number of puppies bred each year. Only 24% of breeders used their own sire for breeding. The finding that some breeders did not test for diseases relevant to their breed, such as hip dysplasia in Labrador Retrievers and German Shepherds, provides important information on the need to educate some breeders, and also buyers of purebred puppies, that screening for significant diseases should occur. Further research into the selection of breeding dams and sires will

  3. Ochratoxicosis in White Leghorn breeder hens: Production and breeding performance

    Directory of Open Access Journals (Sweden)

    Zahoor Ul Hassan*, Muhammad Zargham Khan, Ahrar Khan, Ijaz Javed1, Umer Sadique2 and Aisha Khatoon

    2012-10-01

    Full Text Available This study was designed to evaluate the effect of Ochratoxin A (OTA upon production and breeding parameters in White Leghorn (WL breeder hens. For this purpose, 84 WL breeder hens were divided into seven groups (A-G. The hens in these groups were maintained on feed contaminated with OTA @ 0.0 (control, 0.1, 0.5, 1.0, 3.0, 5.0 and 10.0 mg/Kg, respectively for 21 days. These hens were artificially inseminated with semen obtained from healthy roosters kept on OTA free feed. Egg production and their quality parameters were recorded. Fertile eggs obtained from each group were set for incubation on weekly basis. At the end of the experiment, hens in each group were killed to determined gross and microscopic lesions in different organs. OTA residue concentrations were determined in extracts of liver, kidneys and breast muscles by immunoaffinity column elution and HPLC-Fluorescent detection techniques. Feeing OTA contaminated diet resulted in a significant decrease in egg mass and egg quality parameters. Liver and kidneys showed characteristic lesions of ochratoxicosis. Residue concentration (ng/g of OTA in the hens fed 10 mg/kg OTA, was the highest in liver (26.336±1.16 followed by kidney (8.223±0.85 and were least in breast muscles (1.235±0.21. Embryonic mortalites were higher, while hatachabilites of the chicks were lower in the groups fed higher doses of OTA. Feeding OTA contaminated diets to breeder hen resulted in residues accumulation in their tissues along with significantly reduced production and breeding performance.

  4. Campylobacter epidemiology from breeders to their progeny in Eastern Spain.

    Science.gov (United States)

    Ingresa-Capaccioni, S; Jiménez-Trigos, E; Marco-Jiménez, F; Catalá, P; Vega, S; Marin, C

    2016-03-01

    While horizontal transmission is a route clearly linked to the spread of Campylobacter at the farm level, few studies support the transmission of Campylobacter spp. from breeder flocks to their offspring. Thus, the present study was carried out to investigate the possibility of vertical transmission. Breeders were monitored from the time of housing day-old chicks, then throughout the laying period (0 to 60 wk) and throughout their progeny (broiler fattening, 1 to 42 d) until slaughter. All samples were analyzed according with official method ISO 10272:2006. Results revealed that on breeder farms, Campylobacter isolation started from wk 16 and reached its peak at wk 26, with 57.0% and 93.2% of positive birds, respectively. After this point, the rate of positive birds decreased slightly to 86.0% at 60 wk. However, in broiler production all day-old chicks were found negative for Campylobacter spp, and the bacteria was first isolated at d 14 of age (5.0%), with a significant increase in detection during the fattening period with 62% of Campylobacter positive animals at the end of the production cycle. Moreover, non-positive sample was determined from environmental sources. These results could be explained because Campylobacter may be in a low concentration or in a non-culturable form, as there were several studies that successfully detected Campylobacter DNA, but failed to culture. This form can survive in the environment and infect successive flocks; consequently, further studies are needed to develop more modern, practical, cost-effective and suitable techniques for routine diagnosis. © 2016 Poultry Science Association Inc.

  5. Selection for early response to photostimulation in broiler breeders.

    Science.gov (United States)

    Tyler, N C; Gous, R M

    2011-08-01

    1. To determine if selection for early response to photostimulation could be successful, 150 male broiler breeders were photostimulated at 8 weeks of age. The first 20 to produce a semen sample and have a reddened comb with an area > 10 cm2 were selected as responders (R) and 20 birds that did not show these signs of sexual development were chosen as non-responders (NR). Once sexually mature, 8 birds from each group that consistently produced a semen sample were mated with both egg-type hybrids and broiler breeder females to observe the response to 8-week photostimulation in the as-hatched offspring. 2. The AFE of the F1 females with NR or R paternity and egg-type hybrid layer maternity (F1L) were similar, but AFE was advanced in birds from R relative to NR paternity when they had broiler breeder maternity (F1B). 3. Date following a normal distribution of AFE were extracted from the overall data set. This group included offspring from both NR and R paternity, but AFE in F1L and F1B females with R paternity was advanced compared to those with NR paternity. 4. Mean testis weights, or age at most rapid testis growth predicted using parameters from Tyler and Gous (2009), of F1 males were not significantly different in birds with NR or R paternity. A strong correlation was found between predicted age at most rapid growth and AFE of full sibs and so it is likely that an advance in AFE in female offspring would also result in an advance in age of testis development of males. 5. There was no significant difference in 21-d body weight of F1B females of NR or R paternity, but the 21-d body weights of F1L females were higher from R than from NR sires, suggesting that although fertility and meat-type traits are often negatively correlated, there was no adverse effect of selection for responsiveness to early photostimulation and broiler growth rates to 21 d. 6. These findings showed that the response to early stimulation is heritable, and should be useful to the broiler breeder

  6. Uterine adenocarcinoma with transcoelomic metastases in breeder hens (Gallus domesticus

    Directory of Open Access Journals (Sweden)

    D. G. Bwala

    2011-04-01

    Full Text Available Hens involved in a Newcastle disease study were euthanased at regular intervals according to a designed protocol. Of these, 7.14%(n = 42 of the 82-week-old specific pathogen-free breeder hens were found to have well-delineated firm white to yellowish nodules of varying sizes in the abdominal cavity. Histologically, the nodules were identified as an adenocarcinoma originating in the uterus. Transcoelomic spread was evidenced by the presence of similar neoplastic cells embedded in the serosa and outer longitudinal muscle layer of the intestines as well as the liver.

  7. REKONFIGURASI JARING DISTRIBUSI TENAGA LISTRIK MENGGUNAKAN BREEDER GENETIC ALGORITHM (BGA

    Directory of Open Access Journals (Sweden)

    Cok. Gede Indra Partha

    2009-05-01

    Full Text Available Kebutuhan akan daya listrik saat ini semakin meningkat, seiring dengan perkembangan teknologi, cara hidup, kebutuhan dan budaya di daerah tersebut. Untuk itu keandalan dan kontinuitas pelayanan, sistem transmisidan distribusi perlu ditingkatkan untuk memperoleh pelayanan yang optimal dengan losses terendah. Padapenelitian ini digunakan metode Breeder Algoritma Genetika (BGA yang telah dikembangkan dalam optimasibeban seimbang untuk rekonfigurasi jaring distribusi tegangan menengah (JTM. Proses optimasi beban dilakukandengan cara merubah switch-switch pada penyulang (sebagai gen-gen dalam kromosom jaring distribusi sehinggadiperoleh jaring distribusi yang paling optimal. Hasil analisis menggunakan BGA menunjukkan konfigurasi baruyang optimal dengan losses terendah serta lebih cepat konvergen jika dibandingkan dengan Genetic Algorithm(GA biasa.

  8. On monitoring the tritium breeder in a lead-lithium cooled ceramic breeder (LLCB) module of the ITER

    Energy Technology Data Exchange (ETDEWEB)

    Kapyshev, V., E-mail: kapyshev@nikiet.ru [Federal State Unitary Enterprise ' Dollezhal Research and Development Institute of Power Engineering' , PO Box 788, Moscow 101000 (Russian Federation); Kartashev, I.; Kovalenko, V.; Leshukov, A.; Poliksha, V.; Rasmerov, A.; Strebkov, Yu.; Yukhnov, N.; Vladimirova, N. [Federal State Unitary Enterprise ' Dollezhal Research and Development Institute of Power Engineering' , PO Box 788, Moscow 101000 (Russian Federation)

    2012-08-15

    The operation of a tritium breeder is a most process among engineering problems of DEMO. In this study, a design for monitoring tritium-breeding in the reactor is discussed. Additionally, a system for the experimental estimation of the tritium-breeding ratio (TBR) and the tritium-breeding dynamics in a lead-lithium cooled ceramic breeder (LLCB) test module used in the ITER is proposed. The systems are based on tritium and neutron-flux measurements under the ITER plasma D-T experiments and the use of lithium ortho-silicate and lithium carbonate samples and neutron detectors. Different lithum-6 and lithium-7 isotope contents in the samples are used to measure neutron spectrum. The samples and detectors are delivered in containers to the test breeder module (TBM) on a monitor channel connecting the TBM to an operating zone of the ITER. The tritium content in the samples is measured in a laboratory by the liquid scintillation method. Pneumatic control is used to deliver the samples to the TBM and to extract the samples using the channel during plasma-operational pauses. Neutron calculation is performed to estimate the tritium content in the samples and the heat distribution in the materials of the channel under reactor irradiation. A measurement accuracy of the tritium content in the carbonate and orthosilicate samples can attain a level of 7% and 10%, respectively. The results of the channel-cooling calculation performed under the nominal operating conditions of the TBM (a plasma pulse) are presented in the paper.

  9. Study on the temperature control mechanism of the tritium breeding blanket for CFETR

    Science.gov (United States)

    Liu, Changle; Qiu, Yang; Zhang, Jie; Zhang, Jianzhong; Li, Lei; Yao, Damao; Li, Guoqiang; Gao, Xiang; Wu, Songtao; Wan, Yuanxi

    2017-12-01

    The Chinese fusion engineering testing reactor (CFETR) will demonstrate tritium self- sufficiency using a tritium breeding blanket for the tritium fuel cycle. The temperature control mechanism (TCM) involves the tritium production of the breeding blanket and has an impact on tritium self-sufficiency. In this letter, the CFETR tritium target is addressed according to its missions. TCM research on the neutronics and thermal hydraulics issues for the CFETR blanket is presented. The key concerns regarding the blanket design for tritium production under temperature field control are depicted. A systematic theory on the TCM is established based on a multiplier blanket model. In particular, a closed-loop method is developed for the mechanism with universal function solutions, which is employed in the CFETR blanket design activity for tritium production. A tritium accumulation phenomenon is found close to the coolant in the blanket interior, which has a very important impact on current blanket concepts using water coolant inside the blanket. In addition, an optimal tritium breeding ratio (TBR) method based on the TCM is proposed, combined with thermal hydraulics and finite element technology. Meanwhile, the energy gain factor is adopted to estimate neutron heat deposition, which is a key parameter relating to the blanket TBR calculations, considering the structural factors. This work will benefit breeding blanket engineering for the CFETR reactor in the future.

  10. ALGERIAN SHEEP ARE NONSEASONAL BREEDERS: "CLINICAL, CYTOLOGICAL AND HISTOLOGICAL STUDIES"

    Directory of Open Access Journals (Sweden)

    A NIAR

    2001-12-01

    Full Text Available 4377 pregnant ewes have been used in this study to realise a curve of lambing. This curve prove that the three most important breeds of Algerian sheep can breed all year round.                 To prove also that Algerian sheep are no  seasonal breeder, a cytological and histological study of ewes vaginal mucosa have been done. The exfoliative cytology over all the phases of the oestrous cycle and pregnancy consistent in appearance and appear to be influenced directly by the changes in endogenous ovarian steroid hormones. The histological features of the anterior vaginal epithelium of the ewe sampled all year round, before, during, after oestrus and at pregnancy are described. In the present study, we have never found an arrest of the cyclical genital activity of ewes at any moment of the year. This finding agree with results of the curve of lambing. We can conclude that Algerian ewes are nonseasonal breeders.

  11. Humans are not cooperative breeders but practice biocultural reproduction.

    Science.gov (United States)

    Bogin, Barry; Bragg, Jared; Kuzawa, Christopher

    2014-01-01

    Alloparental care and feeding of young is often called "cooperative breeding" and humans are increasingly described as being a cooperative breeding species. To critically evaluate whether the human offspring care system is best grouped with that of other cooperative breeders. (1) Review of the human system of offspring care in the light of definitions of cooperative, communal and social breeding; (2) re-analysis of human lifetime reproductive effort. Human reproduction and offspring care are distinct from other species because alloparental behaviour is defined culturally rather than by genetic kinship alone. This system allows local flexibility in provisioning strategies and ensures that care and resources often flow between unrelated individuals. This review proposes the term "biocultural reproduction" to describe this unique human reproductive system. In a re-analysis of human life history data, it is estimated that the intense alloparenting typical of human societies lowers the lifetime reproductive effort of individual women by 14-29% compared to expectations based upon other mammals. Humans are not cooperative breeders as classically defined; one effect of the unique strategy of human biocultural reproduction is a lowering of human lifetime reproductive effort, which could help explain lifespan extension.

  12. APT target/blanket design and thermal hydraulics

    Energy Technology Data Exchange (ETDEWEB)

    Cappiello, M.; Pitcher, E.; Pasamehmetoglu, K.

    1999-04-01

    The Accelerator Production of Tritium (APT) Target/Blanket (T/B) system is comprised of an assembly of tritium producing modules supported by control, heat removal, shielding and retargeting systems. The T/B assembly produces tritium using a high-energy proton beam, a tungsten/lead spallation neutron source and {sup 3}He gas as the tritium producing feedstock. For the nominal production mode, protons are accelerated to an energy of 1030 MeV at a current of 100 mA and are directed onto the T/B assembly. The protons are expanded using a raster/expansion system to illuminate a 0.19m by 1.9m beam spot on the front face of a centrally located tungsten neutron source. A surrounding lead blanket produces additional neutrons from scattered high-energy particles. The tungsten neutron source consists of nested, Inconel-718 clad tungsten cylinders assembled in horizontal Inconel-718 tubes. Each tube contains up to 6 cylinders with annular flow channel gaps of 0.102 cm. These horizontal tubes are manifolded into larger diameter vertical inlet and outlet pipes, which provide coolant. The horizontal and vertical tubes make up a structure similar to that of rungs on a ladder. The entire tungsten neutron source consists of 11 such ladders separated into two modules, one containing five ladders and the other six. Ladders are separated by a 0.3 m void region to increase nucleon leakage. The peak thermal-hydraulic conditions in the tungsten neutron source occur in the second ladder from the front. Because tungsten neutron source design has a significant number of parallel flow channels, the limiting thermal-hydraulic parameter is the onset of significant void (OSV) rather than critical heat flux (CHF). A blanket region surrounds the tungsten neutron source. The lateral blanket region is approximately 120 cm thick and 400 cm high. Blanket material consists of lead, {sup 3}He gas, aluminum, and light-water coolant. The blanket region is subdivided into rows based on the local power

  13. Effects of breeder age, strain, and eggshell temperature on nutrient metabolism of broiler embryos

    NARCIS (Netherlands)

    Nangsuay, A.; Meijerhof, R.; Anker-Hensen, van den I.; Heetkamp, M.J.W.; Kemp, B.; Brand, van den H.

    2017-01-01

    Breeder age and broiler strain influence the availability of nutrients and oxygen through yolk size and eggshell conductance, and the effects of these egg characteristics on nutrient metabolism might be influenced by eggshell temperature (EST). This study aims to determine effects of breeder age,

  14. Multiple recycling of fuel in prototype fast breeder reactor in a closed ...

    Indian Academy of Sciences (India)

    Abstract. A fast breeder reactor (FBR) closed fuel cycle involves recycling of the discharged fuel, after reprocessing and refabrication, in order to utilize the unburnt fuel and the bred fissile material. Our previous study in this regard for the prototype fast breeder reactor (PFBR) indicated the possibility of multiple recycling with ...

  15. Multiple recycling of fuel in prototype fast breeder reactor in a closed ...

    Indian Academy of Sciences (India)

    A fast breeder reactor (FBR) closed fuel cycle involves recycling of the discharged fuel, after reprocessing and refabrication, in order to utilize the unburnt fuel and the bred fissile material. Our previous study in this regard for the prototype fast breeder reactor (PFBR) indicated the possibility of multiple recycling with ...

  16. Egg fertility and hatchability in Avians broiler-breeder hens under ...

    African Journals Online (AJOL)

    Impact of temperature and humidity in different month of lay was evaluated on fertility and hatchability in broiler breeder hens reared in Sapele, Nigeria. Six million, six hundred and nineteen thousand, seven hundred and forty six eggs from flocks of Avians broiler-breeder hens reared between 2005 and 2006 in a farm ...

  17. APT {sup 3}He target/blanket. Topical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The {sup 3}He target/blanket (T/B) preconceptual design for the 3/8-Goal facility is based on a 1000-MeV, 200-mA accelerator to produce a high-intensity proton beam that is expanded and then strikes one of two T/B modules. Each module consists of a centralized neutron source made of tungsten and lead, a proton beam backstop region made of zirconium and lead, and a moderator made of D{sub 2}O. Helium-3 gas is circulated through the neutron source region and the blanket to create tritium through neutron capture. The gas is continually processed to extract the tritium with an online separation process.

  18. Heat Loads Due to Small Penetrations in Multilayer Insulation Blankets

    Science.gov (United States)

    Johnson, W. L.; Heckle, K. W.; Fesmire, J. E.

    2017-01-01

    The main penetrations (supports and piping) through multilayer insulation systems for cryogenic tanks have been previously addressed by heat flow measurements. Smaller penetrations due to fasteners and attachments are now experimentally investigated. The use of small pins or plastic garment tag fasteners to each the handling and construction of multilayer insulation (MLI) blankets goes back many years. While it has long been understood that penetrations and other discontinuities degrade the performance of the MLI blanket, quantification of this degradation has generally been lumped into gross performance multipliers (often called degradation factors or scale factors). Small penetrations contribute both solid conduction and radiation heat transfer paths through the blanket. The conduction is down the stem of the structural element itself while the radiation is through the hole formed during installation of the pin or fastener. Analytical models were developed in conjunction with MLI perforation theory and Fouriers Law. Results of the analytical models are compared to experimental testing performed on a 10 layer MLI blanket with approximately 50 small plastic pins penetrating the test specimen. The pins were installed at 76-mm spacing inches in both directions to minimize the compounding of thermal effects due to localized compression or lateral heat transfer. The testing was performed using a liquid nitrogen boil-off calorimeter (Cryostat-100) with the standard boundary temperatures of 293 K and 78 K. Results show that the added radiation through the holes is much more significant than the conduction down the fastener. The results are shown to be in agreement with radiation theory for perforated films.

  19. MHD considerations for a self-cooled liquid lithium blanket

    Energy Technology Data Exchange (ETDEWEB)

    Sze, D.K.; Mattas, R.F.; Hull, A.B.; Picologlou, B.F.; Smith, D.L.

    1992-03-01

    The magnetohydrodynamic (MHD) effects can present a feasibility issue for a self-cooled liquid metal blanket of magnetically confined fusion reactors, especially inboard regime of a tokamak. This pressure drop can be significantly reduced by using insulated wall structure. A self-healing insulating coating has been identified, which will reduce the pressure drop by more than a factor of 10. The future research direction to further quantify the performance of this coating is also outlined.

  20. Development of insulating coatings for liquid metal blankets

    Energy Technology Data Exchange (ETDEWEB)

    Malang, S.; Borgstedt, H.U. [Kernforschungszentrum Karlsruhe GmbH (Germany); Farnum, E.H. [Los Alamos National Lab., NM (United States); Natesan, K. [Argonne National Lab., IL (United States); Vitkovski, I.V. [Efremov Inst., St. Petersburg (Russian Federation). MHD-Machines Lab.

    1994-07-01

    It is shown that self-cooled liquid metal blankets are feasible only with electrically insulating coatings at the duct walls. The requirements on the insulation properties are estimated by simple analytical models. Candidate insulator materials are selected based on insulating properties and thermodynamic consideration. Different fabrication technologies for insulating coatings are described. The status of the knowledge on the most crucial feasibility issue, the degradation of the resisivity under irradiation, is reviewed.

  1. MULTIOBJECTIVE OPTIMIZATION OF AN UPFLOW ANAEROBIC SLUDGE BLANKET REACTOR

    OpenAIRE

    Tomita, Rosana K.; CETESB-Tecnología de Saneamiento Ambiental Empresa del Estado de São Paulo; Sotomayor, Oscar A. Z.; CESQ-Dpto. de Ingeniería Química, Escuela Politécnica Superior de la Universidad de São Paulo; Park, Song W.; CESQ-Dpto. de Ingeniería Química, Escuela Politécnica Superior de la Universidad de São Paulo; Tisza Contreras, Juan F.; FIEM-Universidad Tecnológica del Perú, Lima, Perú

    2014-01-01

    The purpose of this paper is to optimiza the operation of an upflow anaerobic sludge blanket (UASB) reactor. In this kind of processes, besides to maximiza organic matter removal, it is attractive to capture the biogas and to use it to provide energy services. For this purpose, the biogas has to be produced in large quantities. Thus, we have two clear objectives to be achieved: to maximiza both the organic matter removal and the biogas production. Three multiobjective optimization techniques ...

  2. Space environment durability of beta cloth in LDEF thermal blankets

    Science.gov (United States)

    Linton, Roger C.; Whitaker, Ann F.; Finckenor, Miria M.

    1993-01-01

    Beta cloth performance for use on long-term space vehicles such as Space Station Freedom (S.S. Freedom) requires resistance to the degrading effects of the space environment. The major issues are retention of thermal insulating properties through maintaining optical properties, preserving mechanical integrity, and generating minimal particulates for contamination-sensitive spacecraft surfaces and payloads. The longest in-flight test of beta cloth's durability was on the Long Duration Exposure Facility (LDEF), where it was exposed to the space environment for 68 months. The LDEF contained 57 experiments which further defined the space environment and its effects on spacecraft materials. It was deployed into low-Earth orbit (LEO) in Apr. 1984 and retrieved Jan. 1990 by the space shuttle. Among the 10,000 plus material constituents and samples onboard were thermal control blankets of multilayer insulation with a beta cloth outer cover and Velcro attachments. These blankets were exposed to hard vacuum, thermal cycling, charged particles, meteoroid/debris impacts, ultraviolet (UV) radiation, and atomic oxygen (AO). Of these space environmental exposure elements, AO appears to have had the greatest effect on the beta cloth. The beta cloth analyzed in this report came from the MSFC Experiment S1005 (Transverse Flat-Plate Heat Pipe) tray oriented approximately 22 deg from the leading edge vector of the LDEF satellite. The location of the tray on LDEF and the placement of the beta cloth thermal blankets are shown. The specific space environment exposure conditions for this material are listed.

  3. Design and Validation of the APT Target/Blanket System

    Science.gov (United States)

    Waters, L. S.

    1998-04-01

    The Accelerator Production of Tritium (APT) project is now under development as part of DOE's dual track strategy for the replenishment of the nation's tritium supply. APT produces tritium through the He^3(n,p)t reaction, with neutrons generated in a tungsten spallation target and moderated in a surrounding lead blanket filled with He^3 gas tubes. A 100 mA, 1.7 GeV linac provides source protons for the target, and a separate tritium extraction facility continually processes the helium gas stream. Within APT, the Target/Blanket and Materials Engineering Development and Demonstration Project has primary responsibility for validating the neutronics performance of the Target/Blanket system, and for addressing materials issues for all of APT. The APT target design and T/B & Materials ED&D activities will be briefly reviewed, with special emphasis placed on activities leading to the development and validation of radiation transport codes and nuclear data used in the APT design. These include the evolution of the MCNPX simulation code, as well as theoretical work and cross section measurements now underway to support high energy nuclear data library evaluations. Large scale benchmarking measurements completed or planned at LANSCE, the Brookhaven AGS, and Saturne will also be discussed.

  4. Impacts of breeder loss on social structure, reproduction and population growth in a social canid.

    Science.gov (United States)

    Borg, Bridget L; Brainerd, Scott M; Meier, Thomas J; Prugh, Laura R

    2015-01-01

    The importance of individuals to the dynamics of populations may depend on reproductive status, especially for species with complex social structure. Loss of reproductive individuals in socially complex species could disproportionately affect population dynamics by destabilizing social structure and reducing population growth. Alternatively, compensatory mechanisms such as rapid replacement of breeders may result in little disruption. The impact of breeder loss on the population dynamics of social species remains poorly understood. We evaluated the effect of breeder loss on social stability, recruitment and population growth of grey wolves (Canis lupus) in Denali National Park and Preserve, Alaska using a 26-year dataset of 387 radiocollared wolves. Harvest of breeding wolves is a highly contentious conservation and management issue worldwide, with unknown population-level consequences. Breeder loss preceded 77% of cases (n = 53) of pack dissolution from 1986 to 2012. Packs were more likely to dissolve if a female or both breeders were lost and pack size was small. Harvest of breeders increased the probability of pack dissolution, likely because the timing of harvest coincided with the breeding season of wolves. Rates of denning and successful recruitment were uniformly high for packs that did not experience breeder loss; however, packs that lost breeders exhibited lower denning and recruitment rates. Breeder mortality and pack dissolution had no significant effects on immediate or longer term population dynamics. Our results indicate the importance of breeding individuals is context dependent. The impact of breeder loss on social group persistence, reproduction and population growth may be greatest when average group sizes are small and mortality occurs during the breeding season. This study highlights the importance of reproductive individuals in maintaining group cohesion in social species, but at the population level socially complex species may be resilient

  5. Effects of breeder turnover and harvest on group composition and recruitment in a social carnivore

    Science.gov (United States)

    Ausband, David E.; Mitchell, Michael S.; Waits, Lisette P.

    2017-01-01

    Breeder turnover can influence population growth in social carnivores through changes to group size, composition and recruitment.Studies that possess detailed group composition data that can provide insights about the effects of breeder turnover on groups have generally been conducted on species that are not subject to recurrent annual human harvest. We wanted to know how breeder turnover affects group composition and how harvest, in turn, affects breeder turnover in cooperatively breeding grey wolves (Canis lupus Linnaeus 1758).We used noninvasive genetic sampling at wolf rendezvous sites to construct pedigrees and estimate recruitment in groups of wolves before and after harvest in Idaho, USA.Turnover of breeding females increased polygamy and potential recruits per group by providing breeding opportunities for subordinates although resultant group size was unaffected 1 year after the turnover. Breeder turnover had no effect on the number of nonbreeding helpers per group. After breeding male turnover, fewer female pups were recruited in the new males’ litters. Harvest had no effect on the frequency of breeder turnover.We found that breeder turnover led to shifts in the reproductive hierarchies within groups and the resulting changes to group composition were quite variable and depended on the sex of the breeder lost. We hypothesize that nonbreeding females direct help away from non-kin female pups to preserve future breeding opportunities for themselves. Breeder turnover had marked effects on the breeding opportunities of subordinates and the number and sex ratios of subsequent litters of pups. Seemingly subtle changes to groups, such as the loss of one individual, can greatly affect group composition, genetic content, and short-term population growth when the individual lost is a breeder.

  6. Effects of breeder turnover and harvest on group composition and recruitment in a social carnivore.

    Science.gov (United States)

    Ausband, David E; Mitchell, Michael S; Waits, Lisette P

    2017-09-01

    Breeder turnover can influence population growth in social carnivores through changes to group size, composition and recruitment. Studies that possess detailed group composition data that can provide insights about the effects of breeder turnover on groups have generally been conducted on species that are not subject to recurrent annual human harvest. We wanted to know how breeder turnover affects group composition and how harvest, in turn, affects breeder turnover in cooperatively breeding grey wolves (Canis lupus Linnaeus 1758). We used noninvasive genetic sampling at wolf rendezvous sites to construct pedigrees and estimate recruitment in groups of wolves before and after harvest in Idaho, USA. Turnover of breeding females increased polygamy and potential recruits per group by providing breeding opportunities for subordinates although resultant group size was unaffected 1 year after the turnover. Breeder turnover had no effect on the number of nonbreeding helpers per group. After breeding male turnover, fewer female pups were recruited in the new males' litters. Harvest had no effect on the frequency of breeder turnover. We found that breeder turnover led to shifts in the reproductive hierarchies within groups and the resulting changes to group composition were quite variable and depended on the sex of the breeder lost. We hypothesize that nonbreeding females direct help away from non-kin female pups to preserve future breeding opportunities for themselves. Breeder turnover had marked effects on the breeding opportunities of subordinates and the number and sex ratios of subsequent litters of pups. Seemingly subtle changes to groups, such as the loss of one individual, can greatly affect group composition, genetic content, and short-term population growth when the individual lost is a breeder. © 2017 The Authors. Journal of Animal Ecology © 2017 British Ecological Society.

  7. Design study of an upgraded charge breeder for ISOLDE

    CERN Document Server

    Shornikov, A; Wenander, F; Pikin, A

    2013-01-01

    In this work we present our progress in the design study of a new Electron Beam Ion Source (EBIS) to be installed as a charge breeder for reacceleration of rare ions at ISOLDE. The work is triggered by the HIE-ISOLDE upgrade {[}1] and the planned TSR@ISOLDE project {[}2]. To fulfill the requests of the user community the new EBIS should reach an electron beam density of 10(4) A/cm(2) at electron energies up to 150 key and, provide UHV environment and ion cooling in the breeding region to ensure confinement of the ions long enough to reach the requested charge states. We report on the established design parameters and first prototyping steps towards production and testing of suitable equipment. (C) 2013 Elsevier B.V. All rights reserved.

  8. Designing a SCADA system simulator for fast breeder reactor

    Science.gov (United States)

    Nugraha, E.; Abdullah, A. G.; Hakim, D. L.

    2016-04-01

    SCADA (Supervisory Control and Data Acquisition) system simulator is a Human Machine Interface-based software that is able to visualize the process of a plant. This study describes the results of the process of designing a SCADA system simulator that aims to facilitate the operator in monitoring, controlling, handling the alarm, accessing historical data and historical trend in Nuclear Power Plant (NPP) type Fast Breeder Reactor (FBR). This research used simulation to simulate NPP type FBR Kalpakkam in India. This simulator was developed using Wonderware Intouch software 10 and is equipped with main menu, plant overview, area graphics, control display, set point display, alarm system, real-time trending, historical trending and security system. This simulator can properly simulate the principle of energy flow and energy conversion process on NPP type FBR. This SCADA system simulator can be used as training media for NPP type FBR prospective operators.

  9. Accident analysis of heavy water cooled thorium breeder reactor

    Science.gov (United States)

    Yulianti, Yanti; Su'ud, Zaki; Takaki, Naoyuki

    2015-04-01

    Thorium has lately attracted considerable attention because it is accumulating as a by-product of large scale rare earth mining. The objective of research is to analyze transient behavior of a heavy water cooled thorium breeder that is designed by Tokai University and Tokyo Institute of Technology. That is oxide fueled, PWR type reactor with heavy water as primary coolant. An example of the optimized core has relatively small moderator to fuel volume ratio (MFR) of 0.6 and the characteristics of the core are burn-up of 67 GWd/t, breeding ratio of 1.08, burn-up reactivity loss during cycles of fuel and claddings during accident are still below limitations which are in secure condition.

  10. Radiocesium in reindeer breeders in Northern Norway since 1965

    Energy Technology Data Exchange (ETDEWEB)

    Selnaes, T.D. [Institutt for Energiteknikk, Kjeller (Norway); Strand, P. [Statens Straalevern, Oesteraas (Norway)

    1995-12-31

    Reindeer breeders in Kautokeino, Northern Norway, have been monitored for whole body content of {sup 137}Cs every years since 1965. The group was chosen because of it`s large intake of reindeer meat (65 kg/year). The same group has been monitored throughout the years. Some supplements have been made, to maintain the average age within the group. Whole body countings have been performed with a scintillation detector and i single- or multichannel analyzer. The highest values were monitored in 1966, when the average body content of {sup 137}Cs was 39,500 Bq for men, and 18,600 Bq for women. Whole body contents are today around 2,000 Bq, giving a calculated whole body dose of 0.1 mSv/year. 5 refs., 4 figs.

  11. Relationship between ecological concepts and biosafety in broiler breeder farms

    Directory of Open Access Journals (Sweden)

    CA Santos

    2007-09-01

    Full Text Available The entrance of poultry products into the trade world requires changes in the configuration of these products, such as programs that ensure their quality and biosafety for the consumers. This article aims at presenting new perception on poultry biosafety programs in broiler breeder farms from an ecological perspective, making these programs more efficient and cost-effective, i.e., more competitive. Using literature review, some convergences were found between ecology concepts and biosafety programs. One of these convergences is understanding the farm as an open ecosystem, integrating through adaptation the natural environment with the exotic environment. This also allows understanding how the production area interacts with the environment as to energy substrate input and output or as to the dissemination of poultry pathogens by vectors outside the farm or from the production area to the environment. This allows building a theoretical reference for further studies on ecological models for the improvement of poultry biosafety programs.

  12. Tritium recovery from helium purge stream of solid breeder blanket by cryogenic molecular sieve bed. 2. Regeneration operation of cryogenic molecular sieve bed

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, Yoshinori; Enoeda, Mikio; Nishi, Masataka [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-03-01

    Regeneration operation is a very important operation, because it is the most influential factor for deciding the net operation cycle time and the minimum dimension of Cryogenic Molecular Sieve Bed (CMSB). However, the experimental data of CMSB regeneration operation was not so sufficient that even the optimum regeneration procedure could not be decided yet. This work was focused on getting the primary information about various regeneration procedures. (author)

  13. Experimental study on corrosion and precipitation in non-isothermal Pb-17Li system for development of liquid breeder blanket of fusion reactor

    Science.gov (United States)

    Kondo, Masatoshi; Ishii, Masaomi; Norimatsu, Takayoshi; Muroga, Takeo

    2017-07-01

    The corrosion characteristics of RAFM steel JLF-1 in a non-isothermal Pb-17Li flowing system were investigated by means of the corrosion test using a non-isothermal mixing pot. The corrosion test was performed at 739K with a temperature gradient of 14K for 500 hours. The corrosion tests at a static and a flowing conditions in an isothermal Pb-17Li system were also performed at the same temperature for the same duration with the non-isothermal test. Then, the effect of mass transfer both by the flow and the temperature gradient on the corrosion behaviors was featured by the comparison of these results. The corrosion was caused by the dissolution of Fe and Cr from the steel surface into the flowing Pb-17Li. The specimen surface revealed a fine granular microstructure after the corrosion tests. A large number of pebbleshaped protrusions were observed on the specimen surface. This microstructure was different from the original martensite microstructure of the steel, and might be formed by the influence of the reaction with Li component in the alloy. The formation of the granular microstructure was accelerated by the flow and the temperature gradient. Some pebble-shaped protrusions had gaps at their bases. The removal of these pebble-shaped granules by the flowing Pb-17Li might cause a small-scale corrosion-erosion. The results of metallurgical analysis indicated that a large-scale corrosion-erosion was also caused by their destruction of the corroded layer on the surface. The non-isothermal mixing pot equipped a cold trap by a metal mesh in the low temperature region. The metal elements of Fe and Cr were recovered as they precipitated on the surface of the metal mesh. It was found that a Fe-Cr binary intermetallic compound was formed in the precipitation procedure. The overall mass transfer coefficient for the dissolution type corrosion in the non-isothermal system was much bigger than that in the isothermal system. This model evaluation indicated that the temperature gradient accelerated the corrosion.

  14. Towards an intrinsically safe and economic thorium breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Jagannathan, V. [Light Water Reactor Physics Section, Reactor Physics Design Division, Bhabha Atomic Research Centre, 5th Floor, Central Complex, Mumbai 400085 (India)]. E-mail: vjagan@magnum.barc.ernet.in; Pal, Usha [Light Water Reactor Physics Section, Reactor Physics Design Division, Bhabha Atomic Research Centre, 5th Floor, Central Complex, Mumbai 400085 (India)

    2006-10-15

    Thorium does not have intrinsic fissile content unlike uranium. {sup 232}Th has nearly three times thermal absorption cross section compared to {sup 238}U and hence requires much larger externally fed fissile content compared to uranium based fuel. These factors give a permanent economic competitive edge to uranium. Thus thorium is not inducted in any significant measure in present day power reactors, despite the fact that thorium is three times more abundant in the earth's crust than uranium. Uranium reserves vary from country to country and there is also difficulty in having equitable distribution of uranium. Thus when {sup 235}U would get exhausted, perhaps much sooner in countries having limited uranium reserve, there will be a need to switch over from the today's open fuel cycle programme based on {sup 235}U feed to closed fuel cycle based on Pu feed. At that stage thorium and (depleted) uranium would become equal candidates to form the fertile base. All economic considerations would have to be readdressed. The size and growth of the nuclear power programme based on closed fuel cycle would be dependent on maximizing the fissile conversion rate in those reactors. In this paper we reemphasize the principles and the details of the thermal reactor concept 'A Thorium Breeder Reactor' (ATBR), in which the use of PuO{sub 2} seeded thoria fuel is found to give excellent core characteristics like two years cycle length with nearly zero control maneuvers, fairly high seed output to input ratio and intrinsically safe reactivity coefficients [Jagannathan V, Ganesan S, Karthikeyan R. Sensitivity studies for a thorium breeder reactor design with the nuclear data libraries of WIMS library update project. In: Proceedings of the international conference on emerging nuclear energy systems ICENES-2000, September 25-28, 2000, Petten, The Netherlands].

  15. Immediate relation of ING to fast breeder reactor programs

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, W.B

    1969-07-01

    The future large-scale use of nuclear energy is linked in the United States and other major countries to their fast breeder reactor development. Very serious basic problems have been discovered within the last two years, limiting the life in the high fast neutron flux at appropriate temperatures of materials, in particular of metals suitable for fuel cladding in sodium coolant. There is therefore a most urgent need for materials testing facilities under controlled conditions of temperature and neutron flux at sufficiently high ratings to match or surpass those required in commercially competitive fast breeder reactors. None of the test facilities yet planned for 1976 or sooner in the western world appears to match these conditions. The problem is mainly the difficulty of providing the high neutron flux effectively continuously. The spallation reaction in heavy elements was chosen as the basis of ING - the intense neutron generator, because it is the only known reaction that promises a fast neutron source density that is higher than can be controlled from the fission process. It is suggested that several countries will wish to consider urgently whether they should also explore the spallation reaction for the purpose of a fast neutron irradiation test facility. In view of the discontinuance of the ING project in Canada a favourable opportunity will exist over the next few months 10 obtain from Canada by direct personal contact details of the significant study that has been carried on for ING over the last five years. In the event that satisfactory materials are established within the lifetime of the spallation facilities they may continue to be used for the production of selected isotopes more profitably produced in high neutron fluxes. The facilities may be also used for the desirable preirradiation of thorium reactor fuel. The other research purposes planned for ING could also be served. (author)

  16. Induction of eggshell apex abnormalities in broiler breeder hens.

    Science.gov (United States)

    Feberwee, A; Landman, W J M

    2010-04-01

    Recently, the causal relationship between eggshell apex abnormalities (EAA) and Mycoplasma synoviae was described. This eggshell pathology has only been documented in table egg layers both spontaneously and experimentally infected with M. synoviae, suggesting that meat-type layers are less prone to this condition. In this study the susceptibility of specified pathogen free (SPF) broiler breeder hens to produce eggs with EAA after M. synoviae infection was assessed. Five groups of 12 hens each were made: a negative control group, a group inoculated intratracheally (i.t.) with a M. synoviae EAA strain at 19 weeks of age, a group inoculated i.t. with this strain at 19 and 26 weeks of age, a group inoculated with M. synoviae i.t. at 19 weeks of age and infected 5 days earlier with infectious bronchitis virus D1466 (IBV), and a fifth group similar to the former but inoculated i.t. twice with an M. synoviae EAA strain at 19 and 26 weeks of age. Eggs with EAA were only produced after a single i.t. inoculation with the M. synoviae EAA strain if preceded by an infection with IBV. The production of eggs with EAA started 6 weeks after M. synoviae EAA inoculation and the proportion of eggs with EAA during the experiment was 9/449 (2%), which was much lower than that in SPF layer hens (14-22%). The present results suggest that broiler breeder hens are less susceptible to producing eggs with EAA after an infection with a M. synoviae EAA strain preceded by an IBV infection, compared with table egg layers. Similar to SPF egg layers, the mean daily egg production per hen was significantly reduced by the M. synoviae EAA strain and there was a general negative effect on eggshell strength by this strain, suggesting it could also have a detrimental effect on hatching egg quality.

  17. Fuel Summary Report: Shippingport Light Water Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Illum, D.B.; Olson, G.L.; McCardell, R.K.

    1999-01-01

    The Shippingport Light Water Breeder Reactor (LWBR) was a small water cooled, U-233/Th-232 cycle breeder reactor developed by the Pittsburgh Naval Reactors to improve utilization of the nation's nuclear fuel resources in light water reactors. The LWBR was operated at Shippingport Atomic Power Station (APS), which was a Department of Energy (DOE) (formerly Atomic Energy Commission)-owned reactor plant. Shippingport APS was the first large-scale, central-station nuclear power plant in the United States and the first plant of such size in the world operated solely to produce electric power. The Shippingport LWBR was operated successfully from 1977 to 1982 at the APS. During the five years of operation, the LWBR generated more than 29,000 effective full power hours (EFPH) of energy. After final shutdown, the 39 core modules of the LWBR were shipped to the Expended Core Facility (ECF) at Naval Reactors Facility at the Idaho National Engineering and Environmental Laboratory (INEEL). At ECF, 12 of the 39 modules were dismantled and about 1000 of more than 17,000 rods were removed from the modules of proof-of-breeding and fuel performance testing. Some of the removed rods were kept at ECF, some were sent to Argonne National Laboratory-West (ANL-W) in Idaho and some to ANL-East in Chicago for a variety of physical, chemical and radiological examinations. All rods and rod sections remaining after the experiments were shipped back to ECF, where modules and loose rods were repackaged in liners for dry storage. In a series of shipments, the liners were transported from ECF to Idaho Nuclear Technology Engineering Center (INTEC), formerly the Idaho Chemical Processing Plant (ICPP). The 47 liners containing the fully-rodded and partially-derodded core modules, the loose rods, and the rod scraps, are now stored in underground dry wells at CPP-749.

  18. The Effect of Low-Density Broiler Breeder Diets on Performance and Immune Status of their Offspring

    NARCIS (Netherlands)

    Enting, H.; Boersma, W.J.A.; Cornelissen, J.B.W.J.; Winden, van S.C.L.; Verstegen, M.W.A.; Aar, van de P.J.

    2007-01-01

    Effects of low-density broiler breeder diets on offspring performance and mortality were studied using 2,100 female and 210 male Cobb 500 breeders. Breeder treatments involved 4 experimental groups and a control group with normal density diets (ND, 2,600 kcal of AME/kg during rearing and 2,800 kcal

  19. Improved Performance of Broilers and Broiler Breeders Associated with an Amended Vaccination Program Against Reovirosis.

    Science.gov (United States)

    De Herdt, Peter; Broeckx, Marlies; Van Driessche, Filip; Vermeiren, Bart; Van Den Abeele, Geert; Van Gorp, Stefaan

    2016-12-01

    A vertically integrated monitoring program was set up for breeders hatched in 2013 and their offspring to detect differences in performance related to the reovirus vaccination schedule. Within the same organization in Belgium, 17 breeder flocks were vaccinated with one dose of live and one dose of inactivated reovirus vaccine, while 14 flocks received two doses of inactivated vaccine without live priming. The hatchability of the eggs produced by these birds was examined. Further, the daily growth, feed conversion, mortality, slaughterhouse condemnation, production index, and antibiotic use were monitored in 110 broiler flocks derived from the breeders. All gathered data were examined statistically. In eggs obtained from breeders vaccinated twice with inactivated reovirus vaccine, a significant 2.88% higher hatchability rate was observed. The progeny broiler flocks of these breeders showed a significant 18.2% lower mortality during the fattening period. Although not statistically significant, the slaughterhouse condemnation rate was 10.1% lower as well. The results may indicate that-under the epidemiologic conditions of this study-double administration of inactivated reovirus vaccine in broiler breeders can at least contribute to higher hatchability of breeder eggs and lower broiler mortality.

  20. Breeding blanket design for ITER and prototype (DEMO) fusion reactors and breeding materials issues

    Energy Technology Data Exchange (ETDEWEB)

    Takatsu, H.; Enoeda, M. [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

    1998-03-01

    Current status of the designs of the ITER breeding blanket and DEMO blankets is introduced placing emphasis on the breeding materials selection and related issues. The former design is based on the up-to-date design activities, as of October 1997, being performed jointly by Joint Central Team (JCT) and Home Teams (HT`s), while the latter is based on the DEMO blanket test module designs being proposed by each Party at the TBWG (Test Blanket Working Group) meetings. (J.P.N.)

  1. Use of Ball Blanket in attention-deficit/hyperactivity disorder sleeping problems

    DEFF Research Database (Denmark)

    Hvolby, Allan; Bilenberg, Niels

    2011-01-01

    Blanket. The time it takes to fall asleep when using the Ball Blanket is found to be at the same level as the healthy control subjects. Teacher rating of symptoms show an improvement in both activity levels and attention span of approximately 10% after using the Ball Blankets. Conclusions: The results......Objectives: Based on actigraphic surveillance, attention-deficit/hyperactivity disorder (ADHD) symptom rating and sleep diary, this study will evaluate the effect of Ball Blanket on sleep for a sample of 8-13-year-old children with ADHD. Design: Case-control study. Setting: A child and adolescent...

  2. Parentage analysis with few contributing breeders: validation and improvement.

    Science.gov (United States)

    Duchesne, Pierre; Meldgaard, Torben; Berrebi, Patrick

    2008-01-01

    Validation of parental allocation using PAPA software (Duchesne P, Godbout MH, Bernatchez L. 2002. PAPA (package for the analysis of parental allocation): a computer program for simulated and real parental allocation. Mol Ecol Notes. 2:191-193.) was investigated under the assumption that only a small proportion of potential breeders contributed to the offspring sample. Inbreeding levels proved to have a large impact on allocation error rate. Consequently, simulations from artificial, unrelated parents may strongly underestimate allocation error, and so, whenever possible, simulations based on the actual parental genotypes should be run. An unexpected and interesting finding was that ambiguity (the highest likelihood is shared by several parental pairs) rates below 10% stood very close to exact allocation error rates (true proportions of wrong allocations). Hence, the ambiguity rate statistic may be viewed as a ready-made indicator of the resolution power of a specific parental allocation run and, if not exceeding 10%, used as an estimate of allocation error rate. It was found that the PAPA simulator, even with few contributing breeders, can be trusted to output reasonably accurate estimates of allocation error as long as those estimates do not exceed 15%. Indeed, most discrepancies between exact and estimated error then stood below 3%. Reproductive success variance had little impact on error estimate discrepancies within the same range. Finally, a (focal set) method was described to correct the estimated family sizes computed directly from parental allocations. Essentially, this method makes use of the detailed structure of the allocation probabilities associated with each parental pair with at least 1 allocated offspring. The allocation probabilities are expressed in matrix form, and the subsequent calculations are run based on standard matrix algebra. On average, this method provided better estimates of family sizes for each investigated combination of parameter

  3. The neutronic analysis for the ITER reference breeding blanket design

    Energy Technology Data Exchange (ETDEWEB)

    Petrizzi, L.; Ferrari, M. [Association Euratom-ENEA sulla Fusione, Centro Ricerche Energia Frascati (Italy); Lopatkin, A.; Muratov, V. [RDIPE, Moscow (Russian Federation); Plenteda, R.; Santoro, R.; Valenza, D. [ITER Joint Work Site, Garching (Germany)

    1998-07-01

    This paper provides an overview of the neutronic analyses performed during the design development of the ITER breeding blanket beginning in 1997, when the reference BB design was started to the present. In Section 2 optimisation studies for the initial boundary conditions are presented. In Section 3, the detailed three dimensional analyses that were performed are illustrated plus additional optimisation for new boundary conditions. It is shown that a TBR = 0.97 is achieved in the reference configuration for the ITER machine as described in the Final Design Report of the ITER Engineering Design Activity. (authors)

  4. Analysis of changes in egg quality of broiler breeders during the first reproduction period

    National Research Council Canada - National Science Library

    Helena Kontecka; Sebastian Nowaczewski; Marta M. Sierszuła

    2012-01-01

    .... The aim of the study was to analyse the physical characteristics, morphological composition and quality of individual components of the eggs of Cobb 500 broiler breeders during the first year of reproduction...

  5. An Evaluation of liquid metal leak detection methods for the Clinch River Breeder Reactor Plant

    Energy Technology Data Exchange (ETDEWEB)

    Morris, C.J.; Doctor, S.R.

    1977-12-01

    This report documents an independent review and evaluation of sodium leak detection methods described in the Clinch River Breeder Reactor Preliminary Safety Analysis Report. Only information in publicly available documents was used in making the assessments.

  6. Innovatieve huisvesting voor vleeskuikenouderdieren: "Quality Time" stal = Innovative broiler breeder housing system: 'Quality Time' house

    OpenAIRE

    Emous, van, R.A.; Gunnink, H.

    2011-01-01

    In this study results are presented of the research of implementing the innovative housing system "Quality Time" concept in a practical poultry house for broiler breeders. The "Quality Time" concept can improve the sexual behaviour and fertility of the eggs.

  7. Serological profiles of commercial broiler breeders and their progeny. 2. Newcastle disease virus.

    Science.gov (United States)

    King, D J

    1986-01-01

    Newcastle disease virus (NDV) hemagglutination-inhibition (HI) titers were determined for serum samples from eight commercial broiler breeder flocks and their progeny. The chickens sampled had been vaccinated and reared by different producers in different regions of the United States. Breeder flocks had the highest number of NDV-positive HI titers (greater than or equal to 1:10). Eighty percent or more of the samples from six of eight breeder flocks were positive; the geometric mean titers (GMTs) for those six breeder flocks ranged from 19 to 92. Only 3 of 8 broiler flocks had an increased frequency of positive titers and higher GMTs after vaccination. The frequency of positive titers was greater than 80% in only 2 of 8 of the oldest broiler flocks. The number of NDV-negative titers (less than 1:10) increased with age in most broiler flocks, even though all had been vaccinated once or more with live NDV vaccines.

  8. Helper effects on breeder allocations to direct care.

    Science.gov (United States)

    Kushnick, Geoff

    2012-01-01

    Mothers receive childcare and productive assistance from allomaternal helpers in many societies. Although much effort has been aimed toward showing helper effects on maternal reproductive success, less has been directed toward highlighting the full range of potential effects on breeder behavior. I present a model of optimal maternal care with helpers, and tests of derived hypotheses with data collected among the Karo Batak-a group of Indonesian agriculturalists. To test the model's predictions I compared the effect of women receiving help from patrilateral versus matrilateral kin because those kin may provide help with different maternal responsibilities. The model predicts a decrease in maternal allocation to care that is substitutable with the helper contribution and the helper assists with that type of care; it predicts an increase in care that is nonsubstitutable with the helper contribution or substitutable care when the helper assists with other responsibilities. With the exception of one other, most models have failed to account for an increase. Analyses of time spent carrying children supported the model. With matrilateral helpers, women increased carrying; with patrilateral helpers, they decreased it. Time spent farmworking showed the opposite pattern, suggesting that matrilateral helpers effectively decrease costs, nudging optimal maternal care upward. Patterns of breastfeeding provided little support for the model. The results do, however, suggest potential proximate mechanisms by which helpers influence maternal reproductive success in cooperative breeding societies. Copyright © 2012 Wiley Periodicals, Inc.

  9. Decision analysis of the Liquid Metal Fast Breeder Reactor program

    Energy Technology Data Exchange (ETDEWEB)

    Seim, E.H.

    1983-01-01

    The decision-analysis methodology is employed to develop a model to examine the Liquid Metal Fast Breeder Reactor Program to provide guidance for US decision makers. Information relative to the nuclear fuel cycle, the decision analysis technique, and the supporting economic theory is provided for background purposes. The model consists of four courses of action, three decision times, and five critical factors with either two or three paths leading to 198 possible end results. The courses of action cover a range of the possible programs to develop a commercial LMFBR including scale-up, program timing, and plant schedules. Data developed from a number of recent studies along with probability assignments from three sources are run through the model and indicate that course of action one (Compressed Full Program) produces the greatest net benefits discounted to a present value at a real rate of 5%. An analysis is included to consider the foregone costs of coal usage for electrical generation when LMFBR capacity could be available. Ranking of the courses of action does not change compared to the analysis without foregone costs. The foregone costs are approximately five times greater than the LMFBR benefits alone. Recommendations for specific actions by decision makers conclude the study.

  10. Be-Breeder - Learning: a new tool for teaching and learning plant breeding principles

    OpenAIRE

    Roberto Fritsche-Neto; Filipe Inácio Matias

    2016-01-01

    Abstract The Be-Breeder application is an on-line tool constructed through the R software for the purpose of assisting in some of the main genetic and statistical analyses related to the area of plant breeding. In addition, Be-Breeder provides a section called "Learning", which in a simple click-point manner allows explanation of theories related to the effect of inbreeding, population structure, qualitative and quantitative traits, heterosis, population size, effect of selection, and composi...

  11. Elevator mode convection in liquid metal blankets for fusion reactors

    Science.gov (United States)

    Zikanov, Oleg; Liu, Li

    2015-11-01

    The work is motivated by the design of liquid-metal blankets for nuclear fusion reactors. Mixed convection in a downward flow in a vertical duct with strong contant-rate heating of one wall (the Grashof number up to 1012) and strong transverse magnetic field (the Hartmann number up to 104) is considered. It is found that in an infinitely long duct the flow is dominated by exponentially growing elevator modes having the form of a combination of ascending and descending jets. An analytical solution approximating the growth rate of the modes is derived. Analogous flows in finite-length pipes and ducts are analyzed using the high-resolution numerical simulations. The results of the recent experiments are reproduced and explained. It is found that the flow evolves in cycles consisting of periods of exponential growth and breakdowns of the jets. The resulting high-amplitude fluctuations of temperature is a feature potentially dangerous for operation of a reactor blanket. Financial support was provided by the US NSF (Grant CBET 1232851).

  12. Inhibition of Frying Oil Oxidation by Carbon Dioxide Blanketing.

    Science.gov (United States)

    Totani, Nagao; Inoue, Ryota; Yawata, Miho

    2016-06-01

    The oxidation of oil starts, in general, from the penetration of atmospheric oxygen into oil. Inhibition of the vigorous oxidation of oil at deep-frying temperature under carbon dioxide flow, by disrupting the contact between oil and air, was first demonstrated using oil in a round bottom flask. Next, the minimum carbon dioxide flow rate necessary to blanket 4 L of frying oil in an electric fryer (surface area 690 cm(2)) installed with nonwoven fabric cover, was found to be 40 L/h. Then deep-frying of potato was done accordingly; immediately after deep-frying, an aluminum cover was placed on top of the nonwoven fabric cover to prevent the loss of carbon dioxide and the carbon dioxide flow was shut off. In conclusion, the oxidation of oil both at deep-frying temperature and during standing was remarkably inhibited by carbon dioxide blanketing at a practical flow rate and volume. Under the deep-frying conditions employed in this study, the increase in polar compound content was reduced to half of that of the control.

  13. Performance of silvered Teflon (trademark) thermal control blankets on spacecraft

    Science.gov (United States)

    Pippin, Gary; Stuckey, Wayne; Hemminger, Carol

    1993-01-01

    Silverized Teflon (Ag/FEP) is a widely used passive thermal control material for space applications. The material has a very low alpha/e ratio (less than 0.1) for low operating temperatures and is fabricated with various FEP thicknesses (as the Teflon thickness increases, the emittance increases). It is low outgassing and, because of its flexibility, can be applied around complex, curved shapes. Ag/FEP has achieved multiyear lifetimes under a variety of exposure conditions. This has been demonstrated by the Long Duration Exposure Facility (LDEF), Solar Max, Spacecraft Charging at High Altitudes (SCATHA), and other flight experiments. Ag/FEP material has been held in place on spacecraft by a variety of methods: mechanical clamping, direct adhesive bonding of tapes and sheets, and by Velcro(TM) tape adhesively bonded to back surfaces. On LDEF, for example, 5-mil blankets held by Velcro(TM) and clamping were used for thermal control over 3- by 4-ft areas on each of 17 trays. Adhesively bonded 2- and 5-mil sheets were used on other LDEF experiments, both for thermal control and as tape to hold other thermal control blankets in place. Performance data over extended time periods are available from a number of flights. The observed effects on optical properties, mechanical properties, and surface chemistry will be summarized in this paper. This leads to a discussion of performance life estimates and other design lessons for Ag/FEP thermal control material.

  14. Radwaste management aspects of the test blanket systems in ITER

    Energy Technology Data Exchange (ETDEWEB)

    Laan, J.G. van der, E-mail: JaapG.vanderLaan@iter.org [ITER Organization, Route de Vinon sur Verdon, F-13067 Saint Paul Lez Durance (France); Canas, D. [CEA, DEN/DADN, centre de Saclay, F-91191 Gif-sur-Yvette cedex (France); Chaudhari, V. [Institute for Plasma Research, Bhat, Gandhinagar 382428 (India); Iseli, M. [ITER Organization, Route de Vinon sur Verdon, F-13067 Saint Paul Lez Durance (France); Kawamura, Y. [Japan Atomic Energy Agency, Naka-shi, Ibaraki-ken 311-0193 (Japan); Lee, D.W. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Petit, P. [European Commission, DG ENER, Brussels (Belgium); Pitcher, C.S.; Torcy, D. [ITER Organization, Route de Vinon sur Verdon, F-13067 Saint Paul Lez Durance (France); Ugolini, D. [Fusion for Energy, Barcelona (Spain); Zhang, H. [China Nuclear Energy Industry Corporation, Beijing 100032 (China)

    2016-11-01

    Highlights: • Test Blanket Systems are operated in ITER to test tritium breeding technologies. • The in-vessel parts of TBS become radio-active during the ITER nuclear phase. • For each TBM campaign the TBM, its shield and the Pipe Forests are removed. • High tritium contents and novel materials are specific TBS radwaste features. • A preliminary assessment confirmed RW routing, provided its proper conditioning. - Abstract: Test Blanket Systems (TBS) will be operated in ITER in order to prepare the next steps towards fusion power generation. After the initial operation in H/He plasmas, the introduction of D and T in ITER will mark the transition to nuclear operation. The significant fusion neutron production will give rise to nuclear heating and tritium breeding in the in-vessel part of the TBS. The management of the activated and tritiated structures of the TBS from operation in ITER is described. The TBS specific features like tritium breeding and power conversion at elevated temperatures, and the use of novel materials require a dedicated approach, which could be different to that needed for the other ITER equipment.

  15. Digestible Threonine Levels in the Starter Diet of Broilers Derived from Breeders of Different Ages

    Directory of Open Access Journals (Sweden)

    CBGS Tanure

    2015-12-01

    Full Text Available ABSTRACT The aim of this study was to evaluate the effect of digestible threonine supplementation in the starter diet on the performance, intestinal parameters, and nutrient metabolism of broilers derived from breeders of different ages. In total, 480 one-day-old Cobb chicks, derived from 38-or 49-week-oldbreeders, were housed in experimental battery cages until 21 days of age and fed four different threonine levels (800, 900, 1,000, or 1,100 mg/kg in the starter feed. A completely randomized experimental design in a 2x4 factorial arrangement (breeder age x threonine levels was applied, totaling eight treatments with five replicates of 12 birds each. Broilers from older breeders fed 800 mg digestible threonine/kg of diet presented higher weight gain, with a positive linear effect. There was also an interaction between breeder age and threonine levels for the weight gain of 21-d-old broilers supplemented at maximum level of 1,003 mg Thr/kg diet during the starter phase. There was no effect of breeder age or threonine levels on nutrient metabolism during the period of 17-21 days. There was no influence of breeder age or threonine levels in the starter diet on intestinal morphometric measurements, absorption area, or percentage of goblet cells.

  16. RELAP/SCDAPSIM/MOD4.0 modification for transient accident scenario of Test Blanket Modules in ITER involving helium flows into heavy liquid metal

    Energy Technology Data Exchange (ETDEWEB)

    Freixa, J.; Pérez, M.; Mas de les Valls, E.; Batet, L.; Sandeep, T.; Chaudhari, V.; Reventós, F.

    2015-07-01

    The Institute for Plasma Research (IPR), India, is currently involved in the design and development of its Test Blanket Module (TBM) for testing in ITER (International Thermo nuclear Experimental Reactor). The Indian TBM concept is a Lead-Lithium cooled Ceramic Breeder (LLCB), which utilizes lead-lithium eutectic alloy (LLE) as tritium breeder, neutron multiplier and coolant. The first wall facing the plasma is cooled by helium gas. In preparation of the regulatory safety files of ITER-TBM, a number of off-normal event sequences have been postulated. Thermal hydraulic safety analyses of the TBM system will be carried out with the system code RELAP/SCDAPSIM/MOD4.0 which was initially designed to predict the behavior of light water reactor systems during normal and accidental conditions. In order to analyze some of the postulated off-normal events, there is the need to simulate the mixing of Helium and Lead-Lithium fluids. The Technical University of Catalonia is cooperating with IPR to implement the necessary changes in the code to allow for the mixing of helium and liquid metal. In the present study, the RELAP/SCDAPSIM/MOD4 two-phase flow 6-equations structure has been modified to allow for the mixture of LLE in the liquid phase with dry Helium in the gas phase. Practically obtaining a two-fluid 6-equation model where each fluid is simulated with a set of energy, mass and momentum balance equations. A preliminary flow regime map for LLE and helium flow has been developed on the basis of numerical simulations with the OpenFOAM CFD toolkit. The new code modifications have been verified for vertical and horizontal configurations. (Author)

  17. 75 FR 60095 - Sempra LNG Marketing, LLC; Application for Blanket Authorization To Export Liquefied Natural Gas

    Science.gov (United States)

    2010-09-29

    ... capacity to import LNG via ocean-going carrier and with which trade is not prohibited by U.S. law or policy... LNG Marketing, LLC; Application for Blanket Authorization To Export Liquefied Natural Gas AGENCY..., by Sempra LNG Marketing, LLC (Sempra), requesting blanket authorization to export up to a total of...

  18. 77 FR 25711 - Cheniere Marketing, LLC; Application for Blanket Authorization To Export Previously Imported...

    Science.gov (United States)

    2012-05-01

    ... capacity to import LNG via ocean-going carrier and with which trade is not prohibited by U.S. law or policy... Cheniere Marketing, LLC; Application for Blanket Authorization To Export Previously Imported Liquefied... application (Application), filed on March 30, 2012, by Cheniere Marketing, LLC (CMI), requesting blanket...

  19. 18 CFR 284.403 - Code of conduct for persons holding blanket marketing certificates.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Code of conduct for persons holding blanket marketing certificates. 284.403 Section 284.403 Conservation of Power and Water... Pipelines § 284.403 Code of conduct for persons holding blanket marketing certificates. (a) To the extent...

  20. 77 FR 31004 - Southern Natural Gas Company; Notice of Request Under Blanket Authorization

    Science.gov (United States)

    2012-05-24

    ...] Southern Natural Gas Company; Notice of Request Under Blanket Authorization Take notice that on May 9, 2012, Southern Natural Gas Company (Southern), 569 Brookwood Village, Suite 501, Birmingham, Alabama 35209, filed... Commission's regulations under the Natural Gas Act (NGA), and Southern's blanket certificate issued in Docket...

  1. Selective breeding of Arabian and Thoroughbred racehorses in Algeria: perceptions, objectives and practices of owners-breeders

    Directory of Open Access Journals (Sweden)

    Safia Tennah

    2014-04-01

    Full Text Available This survey, conducted with 461 racehorse owners-breeders in Algeria between 2009 and 2011, investigates their perceptions, objectives and practices regarding selective breeding. Racehorse breeding is a full-time professional activity for a third of interviewees. The holdings are small-sized with 77% owning one or two mares. The regular practice of mating is here used to categorize breeders according to their degree of professionalization (38.4% professional vs. 61.6% occasional breeders. Experience in the sector was also used to classify breeders, considering as "junior" the breeders under 10 years experience (38.8% and as "senior" those above 10 years (61.2%. More than professionalization, experience shows a significant impact on practices and objectives. Thus, experience influences breed choice (junior breeders tend to specialize while senior own both Arabian and Thoroughbreds, age at first foaling (sooner among senior breeders, information sources considered for selecting stallions (senior use more diversified sources, the importance granted to the price of mating (greater for junior breeders, the importance granted to the ranking compared to earnings (the ranking being more important to junior breeders, and the priority given to breeding (junior breeders give higher priority to a buy-race-resell activity. Finally, racehorse breeding is poorly professionalized, the only financial goal being cost coverage. Despite inappropriate practices, an interest for selection is noticed.

  2. Wash resistance and repellent properties of Africa University mosquito blankets against mosquitoes

    Directory of Open Access Journals (Sweden)

    N. Lukwa

    2013-04-01

    Full Text Available The effect of permethrin-treated Africa University (AU mosquito blankets on susceptible female Anopheles gambiae sensu lato mosquitoes was studied under laboratory conditions at Africa University Campus in Mutare, Zimbabwe. Wash resistance (ability to retain an effective dose that kills ≥80% of mosquitoes after a number of washes and repellence (ability to prevent ≥80% of mosquito bites properties were studied. The AU blankets were wash resistant when 100% mortality was recorded up to 20 washes, declining to 90% after 25 washes. Untreated AU blankets did not cause any mortality on mosquitoes. However, mosquito repellence was 96%, 94%, 97.9%, 87%, 85% and 80.7% for treated AU blankets washed 0, 5, 10, 15, 20 and 25 times, respectively. Mosquito repellence was consistently above 80% from 0-25 washes. In conclusion, AU blankets washed 25 times were effective in repelling and killing An. gambiae sl mosquitoes under laboratory conditions.

  3. Microwave cavity studies for thermal testing of ceramic breeder materials

    Energy Technology Data Exchange (ETDEWEB)

    Kuston, R.L.

    1987-01-01

    Dielectric heating of proposed ceramic tritium breeder material to study the thermomechanical and thermal-hydraulic properties of the material has been previously suggested. Recent computer studies using codes capable of modeling three-dimensional EM cavities with enclosed dielectric material have been used to determine the size limitations of cavity designs at 200 MHz. The sample can be as large as 0.44 /times/ 0.72m in the plane that is transverse to the direction of neutron flux. The uniformity of volumetric heating over the transverse plane is constant to within a few percent. The sample can be as long as 10cm in the direction of the heat flux and match the expected exponential decay of heat generation, exp( /minus/z/lambda), to within +/minus/8%. The design of the chamber is decribed, including the sample region, additional dielectric loading blocks on two sides of the sample region that are required to generate the field uniformity in the transverse plane, and a description of the matching-section portion of the cavity which provides the correct geometry to cause the cavity to resonate at 200 MHz with the right z dependence to stimulate the exponentially-decaying heat profile in the sample region. The matching section consists of two dielectric slabs, one on each wall of the chamber, and an air or free space region in the center of the matching section. The coupling loop is located near the wall end of the matching section in the free space region. 7 refs., 2 figs.

  4. Composition Optimization of Lithium-Based Ternary Alloy Blankets for Fusion Reactors

    Science.gov (United States)

    Jolodosky, Alejandra

    The goal of this dissertation is to examine the neutronic properties of a novel type of fusion reactor blanket material in the form of lithium-based ternary alloys. Pure liquid lithium, first proposed as a blanket for fusion reactors, is utilized as both a tritium breeder and a coolant. It has many attractive features such as high heat transfer and low corrosion properties, but most importantly, it has a very high tritium solubility and results in very low levels of tritium permeation throughout the facility infrastructure. However, lithium metal vigorously reacts with air and water and presents plant safety concerns including degradation of the concrete containment structure. The work of this thesis began as a collaboration with Lawrence Livermore National Laboratory in an effort to develop a lithium-based ternary alloy that can maintain the beneficial properties of lithium while reducing the reactivity concerns. The first studies down-selected alloys based on the analysis and performance of both neutronic and activation characteristics. First, 3-D Monte Carlo calculations were performed to evaluate two main neutronics performance parameters for the blanket: tritium breeding ratio (TBR), and energy multiplication factor (EMF). Alloys with adequate results based on TBR and EMF calculations were considered for activation analysis. Activation simulations were executed with 50 years of irradiation and 300 years of cooling. It was discovered that bismuth is a poor choice due to achieving the highest decay heat, contact dose rates, and accident doses. In addition, it does not meet the waste disposal ratings (WDR). The straightforward approach to obtain Monte Carlo TBR and EMF results required 231 simulations per alloy and became computationally expensive, time consuming, and inefficient. Consequently, alternate methods were pursued. A collision history-based methodology recently developed for the Monte Carlo code Serpent, calculates perturbation effects on practically

  5. 75 FR 38459 - Certain Woven Electric Blankets From the People's Republic of China: Final Determination of Sales...

    Science.gov (United States)

    2010-07-02

    ... Antidumping Investigations involving Non-Market Economy Countries,'' which states: \\23\\ See Certain Woven... International Trade Administration Certain Woven Electric Blankets From the People's Republic of China: Final... Department'') has determined that certain woven electric blankets (``woven electric blankets'') from the...

  6. Comparison of serum leptin, glucose, total cholesterol and total protein levels in fertile and repeat breeder cows

    Directory of Open Access Journals (Sweden)

    Saime Guzel

    2014-12-01

    Full Text Available In the present study we measured serum glucose, leptin, total cholesterol and total protein concentrations in repeat breeder cows and compared them with fertile cows. For this aim, 20 repeat breeder cows and 20 fertile cows were used as material. Repeat breeder cows were found to have lower levels of leptin and glucose as compared with fertile ones. No significant differences in total cholesterol and total protein levels were observed between the two groups. No significant correlation of leptin with glucose, total cholesterol and total protein was observed in fertile and repeat breeder cows. Low concentrations of glucose and leptin can have some effects on reproductive problems as repeat breeder and help to understand potential mechanisms impairing fertility in repeat breeder cows.

  7. Accelerator-driven molten-salt blankets: Physics issues

    Energy Technology Data Exchange (ETDEWEB)

    Houts, M.G.; Beard, C.A.; Buksa, J.J.; Wiley Davidson, J.; Durkee, J.W.; Perry, R.T.; Poston, D.I. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

    1995-01-20

    A number of nuclear physics issues concerning the Los Alamos molten-salt, accelerator-driven plutonium converter are discussed. General descriptions of several concepts using internal and external moderation are presented. Burnup and salt processing requirement calculations are presented for four concepts, indicating that both the high power density externally moderated concept and an internally moderated concept achieve total plutonium burnups approaching 90% at salt processing rates of less than 2 m{sup 3} per year. Beginning-of-life reactivity temperature coefficients and system kinetic response are also discussed. Future research should investigate the effect of changing blanket composition on operational and safety characteristics. {copyright}American Institute of Physcis 1995

  8. Uranium decay products found on Mir space blanket mitt.

    Science.gov (United States)

    Grismore, R; Rosen, A Z; Llewellyn, R A; Taylor, J S

    2001-01-01

    The space blanket mitt which covered the Trek detector on Mir during four years of orbital flight has been measured for gamma radiation with HPGe and multidimensional spectrometers. Difference spectra from very-long-period spectrometer runs on the mitt and on a similar non-deployed mitt from the same manufacturer show that the mitt has acquired small but significant amounts of gamma radioactivity during orbital flight. Twelve gamma-ray peaks have been measured in the difference spectra, including peaks identified as due to 214Bi and 214Pb from the uranium-radium alpha decay series, and others possibly due to the uranium-actinium series. This implies the presence of a sparse population of uranium decay products in lower orbital space which can only have come from nuclear explosions, burned-up satellite nuclear batteries, the solar wind, or supernova fragments in the local interstellar medium.

  9. Cosmetic wastewater treatment by upflow anaerobic sludge blanket reactor

    Energy Technology Data Exchange (ETDEWEB)

    Puyol, D.; Monsalvo, V.M.; Mohedano, A.F. [Seccion de Ingenieria Quimica, Facultad de Ciencias, Universidad Autonoma de Madrid, C/ Francisco Tomas y Valiente 7, 28049, Madrid (Spain); Sanz, J.L. [Departamento de Biologia Molecular, Facultad de Ciencias, Universidad Autonoma de Madrid, C/ Francisco Tomas y Valiente 7, 28049, Madrid (Spain); Rodriguez, J.J., E-mail: juanjo.rodriguez@uam.es [Seccion de Ingenieria Quimica, Facultad de Ciencias, Universidad Autonoma de Madrid, C/ Francisco Tomas y Valiente 7, 28049, Madrid (Spain)

    2011-01-30

    Anaerobic treatment of pre-settled cosmetic wastewater in batch and continuous experiments has been investigated. Biodegradability tests showed high COD and solid removal efficiencies (about 70%), being the hydrolysis of solids the limiting step of the process. Continuous treatment was carried out in an upflow anaerobic sludge blanket reactor. High COD and TSS removal efficiencies (up to 95% and 85%, respectively) were achieved over a wide range of organic load rate (from 1.8 to 9.2 g TCOD L{sup -1} day{sup -1}). Methanogenesis inhibition was observed in batch assays, which can be predicted by means of a Haldane-based inhibition model. Both COD and solid removal were modelled by Monod and pseudo-first order models, respectively.

  10. Installation of the Light-Water Breeder Reactor at the Shippingport Atomic Power Station (LWBR Development Program)

    Energy Technology Data Exchange (ETDEWEB)

    Massimino, R.J.; Williams, D.A.

    1983-05-01

    This report summarizes the refueling operations performed to install a Light Water Breeder Reactor (LWBR) core into the existing pressurized water reactor vessel at the Shippingport Atomic Power Station. Detailed descriptions of the major installation operations (e.g., primary system preconditioning, fuel installation, pressure boundary seal welding) are included as appendices to this report; these operations are of technical interest to any reactor servicing operation, whether the reactor is a breeder or a conventional light water non-breeder core.

  11. Eddy current induced electromagnetic loads on shield blankets during plasma disruptions in ITER: A benchmark exercise

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Duck-Hoi [ITER Korea: National Fusion Research Institute, Gwahangno 113, Yuseong-gu, Daejeon (Korea, Republic of); Oh, Dong-Keun, E-mail: spinhalf@nfri.re.k [ITER Korea: National Fusion Research Institute, Gwahangno 113, Yuseong-gu, Daejeon (Korea, Republic of); Pak, Sunil; Jhang, Hogun [ITER Korea: National Fusion Research Institute, Gwahangno 113, Yuseong-gu, Daejeon (Korea, Republic of); Lee, Jaeyoul [Tae Sung S and E Inc., Yongsan-dong 575, Yuseong-gu, Daejeon (Korea, Republic of); Rozov, Vladimir [ITER Organization, Cadarache, F-13108 St. Paul-lez-Durance (France)

    2010-12-15

    According to recent updates of ITER shield blanket design, electromagnetic loads during the plasma disruption are being evaluated to verify the mechanical confidence and reliability. As a course of such evaluations, a benchmark activity for the electromagnetic analysis, coordinated by ITER Organization, is underway between ITER parties to compare the calculation results for disruption loads on the blankets. In this paper, we present calculation results for the electromagnetic loads on the simplified but practical model of ITER shield blankets with respect to six representative disruption scenarios of which ITER distributes simulation results based on the DINA code as a reference of the design and analysis. Commercial finite element method software, ANSYS/Emag{sup TM}, was employed to evaluate the eddy current on the blanket modules with the 40{sup o} sector model for major conducting structure of the tokamak including double-walled vacuum vessel, triangular support, and vertical targets of divertors. An interface between ANSYS/Emag{sup TM} and plasma simulator was implemented with a conversion tool assigning the plasma current density on the ANSYS elements corresponding to the current filaments in DINA outputs. Discussions are made of the possible improvement of the blanket model taking more realistic blanket configuration into account at the cost of the moderate increase in computational time. A final remark is given of the possibility of incorporating halo currents into ANSYS disruption simulations, which are major sources of electromagnetic loads on in-vessel components including blankets.

  12. Peningkatan mutu blanket karet alam melalui proses predrying dan penyemprotan asap cair

    Directory of Open Access Journals (Sweden)

    Afrizal Vachlepi

    2017-06-01

    Full Text Available Most of Indonesian rubber products SIR 20 are made from the material of raw rubber obtained from smallholders. However, the quality of this material is not good enough. Thus, quality improvement has to be carried out by manufacturers. The liquid smoke used during the blanket hanging process can improve the quality of the rubber products SIR 20. This research aimed to determine and study the effects of liquid smoke spraying and blanket hanging duration on the drying factor, the dry rubber content, technical quality, vulcanization characteristics, and physical properties of vulcanized natural rubber. Treatments consisted of various hanging duration (6, 8, and 10 days, and without hanging and spraying (with and without spraying of liquid smoke. The results showed that the spraying of liquid smoke on natural rubber blankets could improve the technical quality of the natural rubber, especially the values of Po and PRI. The spraying of liquid smoke could reduce the blanket hanging duration to 6-8 days. The blankets sprayed with liquid smoke had the optimum cure time of around 15 minutes and 19 seconds and the scorch time of around 3 minutes and 22 seconds. These values indicated that the vulcanization characteristics of blankets which were sprayed with liquid smoke were generally better than those of blankets which were not sprayed with liquid smoke

  13. Synthesis and Characterization of Fibre Reinforced Silica Aerogel Blankets for Thermal Protection

    Directory of Open Access Journals (Sweden)

    S. Chakraborty

    2016-01-01

    Full Text Available Using tetraethoxysilane (TEOS as the source of silica, fibre reinforced silica aerogels were synthesized via fast ambient pressure drying using methanol (MeOH, trimethylchlorosilane (TMCS, ammonium fluoride (NH4F, and hexane. The molar ratio of TEOS/MeOH/(COOH2/NH4F was kept constant at 1 : 38 : 3.73 × 10−5 : 0.023 and the gel was allowed to form inside the highly porous meta-aramid fibrous batting. The wet gel surface was chemically modified (silylation process using various concentrations of TMCS in hexane in the range of 1 to 20% by volume. The fibre reinforced silica aerogel blanket was obtained subsequently through atmospheric pressure drying. The aerogel blanket samples were characterized by density, thermal conductivity, hydrophobicity (contact angle, and Scanning Electron Microscopy. The radiant heat resistance of the aerogel blankets was examined and compared with nonaerogel blankets. It has been observed that, compared to the ordinary nonaerogel blankets, the aerogel blankets showed a 58% increase in the estimated burn injury time and thus ensure a much better protection from heat and fire hazards. The effect of varying the concentration of TMCS on the estimated protection time has been examined. The improved thermal stability and the superior thermal insulation of the flexible aerogel blankets lead to applications being used for occupations that involve exposure to hazards of thermal radiation.

  14. Analysis and optimization of minor actinides transmutation blankets with regards to neutron and gamma sources

    Directory of Open Access Journals (Sweden)

    Kooyman Timothée

    2017-01-01

    Full Text Available Heterogeneous loading of minor actinides in radial blankets is a potential solution to implement minor actinides transmutation in fast reactors. However, to compensate for the lower flux level experienced by the blankets, the fraction of minor actinides to be loaded in the blankets must be increased to maintain acceptable performances. This severely increases the decay heat and neutron source of the blanket assemblies, both before and after irradiation, by more than an order of magnitude in the case of neutron source for instance. We propose here to implement an optimization methodology of the blankets design with regards to various parameters such as the local spectrum or the mass to be loaded, with the objective of minimizing the final neutron source of the spent assembly while maximizing the transmutation performances of the blankets. In a first stage, an analysis of the various contributors to long- and short-term neutron and gamma source is carried out whereas in a second stage, relevant estimators are designed for use in the effective optimization process, which is done in the last step. A comparison with core calculations is finally done for completeness and validation purposes. It is found that the use of a moderated spectrum in the blankets can be beneficial in terms of final neutron and gamma source without impacting minor actinides transmutation performances compared to more energetic spectrum that could be achieved using metallic fuel for instance. It is also confirmed that, if possible, the use of hydrides as moderating material in the blankets is a promising option to limit the total minor actinides inventory in the fuel cycle. If not, it appears that focus should be put upon an increased residence time for the blankets rather than an increase in the acceptable neutron source for handling and reprocessing.

  15. Analysis and optimization of minor actinides transmutation blankets with regards to neutron and gamma sources

    Science.gov (United States)

    Kooymana, Timothée; Buiron, Laurent; Rimpault, Gérald

    2017-09-01

    Heterogeneous loading of minor actinides in radial blankets is a potential solution to implement minor actinides transmutation in fast reactors. However, to compensate for the lower flux level experienced by the blankets, the fraction of minor actinides to be loaded in the blankets must be increased to maintain acceptable performances. This severely increases the decay heat and neutron source of the blanket assemblies, both before and after irradiation, by more than an order of magnitude in the case of neutron source for instance. We propose here to implement an optimization methodology of the blankets design with regards to various parameters such as the local spectrum or the mass to be loaded, with the objective of minimizing the final neutron source of the spent assembly while maximizing the transmutation performances of the blankets. In a first stage, an analysis of the various contributors to long and short term neutron and gamma source is carried out while in a second stage, relevant estimators are designed for use in the effective optimization process, which is done in the last step. A comparison with core calculations is finally done for completeness and validation purposes. It is found that the use of a moderated spectrum in the blankets can be beneficial in terms of final neutron and gamma source without impacting minor actinides transmutation performances compared to more energetic spectrum that could be achieved using metallic fuel for instance. It is also confirmed that, if possible, the use of hydrides as moderating material in the blankets is a promising option to limit the total minor actinides inventory in the fuel cycle. If not, it appears that focus should be put upon an increased residence time for the blankets rather than an increase in the acceptable neutron source for handling and reprocessing.

  16. Formation of the research competence of future breeder-geneticists during the practical training

    Directory of Open Access Journals (Sweden)

    Наталія Павлівна Антіпова

    2016-03-01

    Full Text Available In the article were analyzed content, structure and special features of the practical training of the future breeder-geneticists. There was specified that for bachelor breeder-geneticists of the 6.090101 “Agronomy” training direction are provided the following practices: botany, tractors and cars, soil science, agricultural machines, fruit growing, vegetable growing, agriculture, agrochemistry, plant growing, entomology, phytopathology, technology of retreatment and preservation of plant growing production, selection and seed growing of agricultural crops; work practice on agronomy.In the article was grounded the structural-logic scheme of organization of practices of the future breeder-geneticists for forming their professional research competences. There were analyzed functions and methods of scientific-cognitive activity, forms, means and methods of the practical education. According to the types of practices there were elucidated and grounded the structure of practical training of the future breeder-geneticists – natural-technical and special-professional – educational and work practices.The natural-technical, special-professional and production-technological practices form in bachelor agronomists breeder-geneticists professional scientific-research competences: theoretical-analytical ones – geosphere, bio-geo-physical-chemical, meteorological-climatological, informative, fundamental and applied ecological, fundamental-scientific agrosphere; professional competences of professionally oriented and special practical training – agricultural, branch, techno-service, technological, selective, special-genetic-engineering ones; managerial ones

  17. Flow characteristics analysis of purge gas in unitary pebble beds by CFD simulation coupled with DEM geometry model for fusion blanket

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Youhua [University of Science and Technology of China, Hefei, Anhui, 230027 (China); Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Chen, Lei [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Liu, Songlin, E-mail: slliu@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Luo, Guangnan [University of Science and Technology of China, Hefei, Anhui, 230027 (China); Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China)

    2017-01-15

    Highlights: • A unitary pebble bed was built to analyze the flow characteristics of purge gas based on DEM-CFD method. • Flow characteristics between particles were clearly displayed. • Porosity distribution, velocity field distribution, pressure field distribution, pressure drop and the wall effects on velocity distribution were studied. - Abstract: Helium is used as the purge gas to sweep tritium out when it flows through the lithium ceramic and beryllium pebble beds in solid breeder blanket for fusion reactor. The flow characteristics of the purge gas will dominate the tritium sweep capability and tritium recovery system design. In this paper, a computational model for the unitary pebble bed was conducted using DEM-CFD method to study the purge gas flow characteristics in the bed, which include porosity distribution between pebbles, velocity field distribution, pressure field distribution, pressure drop as well as the wall effects on velocity distribution. Pebble bed porosity and velocity distribution with great fluctuations were found in the near-wall region and detailed flow characteristics between pebbles were displayed clearly. The results show that the numerical simulation model has an error with about 11% for estimating pressure drop when compared with the Ergun equation.

  18. Water-cooled lithium-lead box-shaped blanket concept for Demo: thermo-mechanical optimization and manufacturing sequence proposal

    Energy Technology Data Exchange (ETDEWEB)

    Baraer, L.; Dinot, N.; Giancarli, L.; Proust, E.; Salavy, J.F. [CEA Centre d`Etudes de Saclay, 91 - Gif-sur-Yvette (France). Dept. de Mecanique et de Technologie; Severi, Y.; Quintric-Bossy, J. [CEA Centre d`Etudes de Cadarache, 13 - Saint-Paul-lez-Durance (France). Direction des Reacteurs Nucleaires

    1992-12-31

    The development of the water-cooled lithium-lead box-shaped blanket concept for DEMO has now reached the stage of thermo-mechanical optimization. In the previous design phases the preliminary dimensioning of the cooling circuit has permitted to define the water proportions required in the breeder region and to demonstrate, after a minimization of steel proportion and thicknesses, that this concept could reach tritium breeding self-sufficiency. In the present analysis the location of the coolant pipes has been optimized for the whole equatorial plane cross-section of both inboard and outboard segments in order to maintain the maximum Pb-17Li/steel interface temperature below 480 deg C and to minimize the thermal gradients along the steel structures. The consequent thermo-mechanical analysis has shown that the thermal stresses always remain below the allowable limits. Segment fabricability and removal are the next design issues to be analyzed. Within this strategy, a first manufactury sequence for the outboard segment is proposed.

  19. Neutronic study on seed-blanket type reduced-moderation water reactor fuel assembly

    OpenAIRE

    Shelley, A.; 久語 輝彦; 嶋田 昭一郎; 大久保 努; 岩村 公道

    2004-01-01

    Neutronic study has been done for a PWR-type reduced-moderation water reactor with seed-blanket fuel assemblies to achieve a high conversion ratio, a negative void coefficient and a high burnup by using a MOX fuel. The results of the precise assembly burnup calculations show that the recommended numbers of seed and blanket layers are 15(S15) and 5(B5), respectively. By the optimization of axial configuration, the S15B5 assembly with the seed of 1000times2 mm high, internal blanket of 150 mm h...

  20. In plain sight: the Chesapeake Bay crater ejecta blanket

    Science.gov (United States)

    Griscom, D. L.

    2012-02-01

    The discovery nearly two decades ago of a 90 km-diameter impact crater below the lower Chesapeake Bay has gone unnoted by the general public because to date all published literature on the subject has described it as "buried". To the contrary, evidence is presented here that the so-called "upland deposits" that blanket ∼5000 km2 of the U.S. Middle-Atlantic Coastal Plain (M-ACP) display morphologic, lithologic, and stratigraphic features consistent with their being ejecta from the 35.4 Ma Chesapeake Bay Impact Structure (CBIS) and absolutely inconsistent with the prevailing belief that they are of fluvial origin. Specifically supporting impact origin are the facts that (i) a 95 %-pure iron ore endemic to the upland deposits of southern Maryland, eastern Virginia, and the District of Columbia has previously been proven to be impactoclastic in origin, (ii) this iron ore welds together a small percentage of well-rounded quartzite pebbles and cobbles of the upland deposits into brittle sheets interpretable as "spall plates" created in the interference-zone of the CBIS impact, (iii) the predominantly non-welded upland gravels have long ago been shown to be size sorted with an extreme crater-centric gradient far too large to have been the work of rivers, but well explained as atmospheric size-sorted interference-zone ejecta, (iv) new evidence is provided here that ~60 % of the non-welded quartzite pebbles and cobbles of the (lower lying) gravel member of the upland deposits display planar fractures attributable to interference-zone tensile waves, (v) the (overlying) loam member of the upland deposits is attributable to base-surge-type deposition, (vi) several exotic clasts found in a debris flow topographically below the upland deposits can only be explained as jetting-phase crater ejecta, and (vii) an allogenic granite boulder found among the upland deposits is deduced to have been launched into space and sculpted by hypervelocity air friction during reentry. An

  1. Be-Breeder - Learning: a new tool for teaching and learning plant breeding principles

    Directory of Open Access Journals (Sweden)

    Roberto Fritsche-Neto

    2016-09-01

    Full Text Available The Be-Breeder application is an on-line tool constructed through the R software for the purpose of assisting in some of the main genetic and statistical analyses related to the area of plant breeding. In addition, Be-Breeder provides a section called “Learning”, which in a simple click-point manner allows explanation of theories related to the effect of inbreeding, population structure, qualitative and quantitative traits, heterosis, population size, effect of selection, and composition of hybrids. Be-Breeder is available for network use on the website of the Allogamous Plant Breeding Laboratory (Laboratório de Melhoramento de Plantas Alógamas of ESALQ-USP through the link: http://www.genetica.esalq.usp.br/alogamas/R.html.

  2. Effects of environmental temperature and dietary energy on energy partitioning coefficients of female broiler breeders.

    Science.gov (United States)

    Pishnamazi, A; Renema, R A; Paul, D C; Wenger, I I; Zuidhof, M J

    2015-10-01

    With increasing disparity between broiler breeder target weights and broiler growth potential, maintenance energy requirements have become a larger proportion of total broiler breeder energy intake. Because energy is partitioned to growth and egg production at a lower priority than maintenance, accurate prediction of maintenance energy requirements is important for practical broiler breeder feed allocation decisions. Environmental temperature affects the maintenance energy requirement by changing rate of heat loss to the environment. In the ME system, heat production (energy lost) is part of the maintenance requirement (ME). In the current study, a nonlinear mixed model was derived to predict ME partitioning of broiler breeder hens under varied temperature conditions. At 21 wk of age, 192 Ross 708 hens were individually caged within 6 controlled environmental chambers. From 25 to 41 wk, 4 temperature treatments (15°C, 19°C, 23°C, and 27°C) were randomly assigned to the chambers for 2-week periods. Half of the birds in each chamber were fed a high-energy (HE; 2,912 kcal/kg) diet, and half were fed a low-energy (LE; 2,790 kcal/kg) diet. The nonlinear mixed regression model included a normally distributed random term representing individual hen maintenance, a quadratic response to environmental temperature, and linear ADG and egg mass (EM) coefficients. The model assumed that energy requirements for BW gain and egg production were not influenced by environmental temperature because hens were homeothermic, and the cellular processes for associated biochemical processes occurred within a controlled narrow core body temperature range. Residual feed intake (RFI) and residual ME (RME) were used to estimate efficiency. A quadratic effect of environmental temperature on broiler breeder MEm was predicted ( broiler breeders fed the HE diet.

  3. Comparative assessment of nuclear fuel cycles. Light-water reactor once-through, classical fast breeder reactor, and symbiotic fast breeder reactor cycles

    Energy Technology Data Exchange (ETDEWEB)

    Hardie, R.W.; Barrett, R.J.; Freiwald, J.G.

    1980-06-01

    The object of the Alternative Nuclear Fuel Cycle Study is to perform comparative assessments of nuclear power systems. There are two important features of this study. First, this evaluation attempts to encompass the complete, integrated fuel cycle from mining of uranium ore to disposal of waste rather than isolated components. Second, it compares several aspects of each cycle - energy use, economics, technological status, proliferation, public safety, and commercial potential - instead of concentrating on one or two assessment areas. This report presents assessment results for three fuel cycles. These are the light-water reactor once-through cycle, the fast breeder reactor on the classical plutonium cycle, and the fast breeder reactor on a symbiotic cycle using plutonium and /sup 233/U as fissile fuels. The report also contains a description of the methodology used in this assessment. Subsequent reports will present results for additional fuel cycles.

  4. Development and testing of a zero stitch MLI blanket using plastic pins for space use

    Science.gov (United States)

    Hatakenaka, Ryuta; Miyakita, Takeshi; Sugita, Hiroyuki; Saitoh, Masanori; Hirai, Tomoyuki

    2014-11-01

    New types of MLI blanket have been developed to achieve high thermal performance while maintaining production and assembly workability equivalent to the conventional type. Tag-pins, which are widely used in commercial applications to hook price tags to products, are used to fix the films in place and the pin material is changed to polyetheretherketone (PEEK) for use in space. Thermal performance is measured by using a boil-off calorimeter, in which a rectangular liquid nitrogen tank is used to evaluate the degradation at the bending corner and joint of the blanket. Zero-stitch- and multi-blanket-type MLIs show significantly improved thermal performance (ɛeff is smaller than 0.0050 at room temperature) despite having the same fastener interface as traditional blankets, while the venting design and number of tag-pins are confirmed as appropriate in a depressurization test.

  5. 77 FR 76015 - Prior Notice of Activity Under Blanket Certificate; Dominion Transmission, Inc.

    Science.gov (United States)

    2012-12-26

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Prior Notice of Activity Under Blanket Certificate; Dominion Transmission, Inc. On December 7, 2012, Dominion Transmission, Inc. (Dominion) filed with the Federal Energy...

  6. Comparison of three MHD flow control methods for self-cooled liquid metal blankets

    Energy Technology Data Exchange (ETDEWEB)

    Walker, J.S.; Picologlou, B.F.

    1986-01-01

    The heat deposition in a blanket is concentrated near the first wall. Uniform liquid-metal velocity in a self-cooled blanket is unattractive, because it leads to low mixed-mean temperature rise through the blanket and reduced power conversion efficiency. The objective of MHD flow control is to use the electromagnetic forces to produce a non-uniform velocity distribution which gives a uniform temperature distribution over the thickness of the blanket. Three methods of MHD flow control are presented here and the MHD pressure drops corresponding to the three methods are compared. One of the methods, although successful at achieving nonuniform velocity profiles, permits a large circulation of electric current which produces a high pressure drop. The analytical results do not indicate a clear choice between the other two methods. The analytical results do point to possible difference in heat transfer performance with the two methods.

  7. Feasibility study of a fission supressed blanket for a tandem-mirror hybrid reactor

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.; Lee, J.D.; Barr, W.L.

    1981-10-05

    A study of fission suppressed blankets for the tandem mirror not only showed such blankets to be feasible but also to be safer than fissioning blankets. Such hybrids could produce enough fissile material to support up to 17 light water reactors of the same nuclear power rating. Beryllium was compared to /sup 7/Li for neutron multiplication; both were considered feasible but the blanket with Li produced 20% less fissile fuel per unit of nuclear power in the reactor. The beryllium resource, while possibly being too small for extensive pure fusion application, would be adequate (with carefully planned industrial expansion) for the hybrid because of the large support ratio, and hence few hybrids required. Radiation damage and coatings for beryllium remain issues to be resolved by further study and experimentation.

  8. Climate-driven expansion of blanket bogs in Britain during the Holocene

    Science.gov (United States)

    Gallego-Sala, A. V.; Charman, D. J.; Harrison, S. P.; Li, G.; Prentice, I. C.

    2016-01-01

    Blanket bog occupies approximately 6 % of the area of the UK today. The Holocene expansion of this hyperoceanic biome has previously been explained as a consequence of Neolithic forest clearance. However, the present distribution of blanket bog in Great Britain can be predicted accurately with a simple model (PeatStash) based on summer temperature and moisture index thresholds, and the same model correctly predicts the highly disjunct distribution of blanket bog worldwide. This finding suggests that climate, rather than land-use history, controls blanket-bog distribution in the UK and everywhere else. We set out to test this hypothesis for blanket bogs in the UK using bioclimate envelope modelling compared with a database of peat initiation age estimates. We used both pollen-based reconstructions and climate model simulations of climate changes between the mid-Holocene (6000 yr BP, 6 ka) and modern climate to drive PeatStash and predict areas of blanket bog. We compiled data on the timing of blanket-bog initiation, based on 228 age determinations at sites where peat directly overlies mineral soil. The model predicts that large areas of northern Britain would have had blanket bog by 6000 yr BP, and the area suitable for peat growth extended to the south after this time. A similar pattern is shown by the basal peat ages and new blanket bog appeared over a larger area during the late Holocene, the greatest expansion being in Ireland, Wales, and southwest England, as the model predicts. The expansion was driven by a summer cooling of about 2 °C, shown by both pollen-based reconstructions and climate models. The data show early Holocene (pre-Neolithic) blanket-bog initiation at over half of the sites in the core areas of Scotland and northern England. The temporal patterns and concurrence of the bioclimate model predictions and initiation data suggest that climate change provides a parsimonious explanation for the early Holocene distribution and later expansion of

  9. Preliminary Failure Modes and Effects Analysis of the US DCLL Test Blanket Module

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2010-06-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a small tritium-breeding test blanket module design for the International Thermonuclear Experimental Reactor. The FMEA was quantified with “generic” component failure rate data, and the failure events are binned into postulated initiating event families and frequency categories for safety assessment. An appendix to this report contains repair time data to support an occupational radiation exposure assessment for test blanket module maintenance.

  10. Preliminary Failure Modes and Effects Analysis of the US DCLL Test Blanket Module

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2007-08-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a small tritium-breeding test blanket module design for the International Thermonuclear Experimental Reactor. The FMEA was quantified with “generic” component failure rate data, and the failure events are binned into postulated initiating event families and frequency categories for safety assessment. An appendix to this report contains repair time data to support an occupational radiation exposure assessment for test blanket module maintenance.

  11. Effect of scattered feeding and feeding twice a day during rearing on indicators of hunger and frustration in broiler breeders

    NARCIS (Netherlands)

    Jong, de I.C.; Wolthuis-Fillerup, M.; Blokhuis, H.J.

    2005-01-01

    Broiler breeders are routinely fed restricted during rearing which has a major negative effect on their welfare. They suffer from hunger and frustration from thwarting of feeding. The aim of this experiment was therefore to study if broiler breeder welfare can be improved by changes in the feeding

  12. The Effect of Low-Density Diets on Broiler Breeder Development and Nutrient Digestibility During the Rearing Period

    NARCIS (Netherlands)

    Enting, H.; Veldman, A.; Verstegen, M.W.A.; Aar, van de P.J.

    2007-01-01

    Low-density diets might help to reduce hunger feeling in restricted-fed broiler breeders. Effects of low-density diets on nutrient digestibility and bird development were studied in Cobb 500 broiler breeder hens from 4 wk of age until the onset of the lay (wk 26). The experiment included 4

  13. Liquid immersion blanket design for use in a compact modular fusion reactor

    Science.gov (United States)

    Sorbom, Brandon; Ball, Justin; Barnard, Harold; Haakonsen, Christian; Hartwig, Zachary; Olynyk, Geoffrey; Sierchio, Jennifer; Whyte, Dennis

    2012-10-01

    Traditional tritium breeding blankets in fusion reactor designs include a large amount of structural material. This results in complex engineering requirements, complicated sector maintenance, and marginal tritium breeding ratios (TBR). We present a conceptual design of a fully liquid blanket. To maximize tritium breeding volume, the vacuum vessel is completely immersed in a continuously recycled FLiBe blanket, with the exception of small support posts. FLiBe has a wide liquid temperature window (459 C to 1430 C), low electrical conductivity to minimize MHD effects, similar thermal/fluid characteristics to water, and is chemically inert. While tritium breeding with FLiBe in traditional blankets is poor, we use MCNP neutronics analysis to show that the immersion blanket design coupled with a beryllium neutron multiplier results in TBR > 1. FLiBe is shown to be a sufficient radiation shield for the toroidal field magnets and can be used as a coolant for the vacuum vessel and divertor, allowing for a simplified single-phase, low-pressure, single-fluid cooling scheme. When coupled with a high-field compact reactor design, the immersion blanket eliminates the need for complex sector maintenance, allows the vacuum vessel to be a replaceable component, and reduces financial cost.

  14. Impact hammer test of ITER blanket remote handling system

    Energy Technology Data Exchange (ETDEWEB)

    Noguchi, Yuto, E-mail: noguchi.yuto@jaea.go.jp; Maruyama, Takahito; Ueno, Kenichi; Komai, Masafumi; Takeda, Nobukazu; Kakudate, Satoshi

    2016-11-01

    An impact hammer test of the full-scale mock-up of the ITER blanket remote handling system (BRHS) was carried out to validate the results of the seismic analysis of the BRHS which were performed using a finite element (FE) model. As the FE analysis of the BRHS predicted a vertical mode ∼8 Hz, which coincides with a major natural frequency of the vacuum vessel of ITER, evaluating the dynamic response of the BRHS experimentally and measuring the system's damping is indispensable in verifying the structural design of the system. Recent preliminary impact testing on the full-scale mock-up of the BRHS showed that the mock-up has a vertical major natural mode having a natural frequency of ∼7.5 Hz and a damping ratio of 0.5%. Several other major natural modes having frequencies less than 10 Hz were found to have damping ratios ranging from 0.2% to 2%. It was confirmed that the natural major frequencies obtained in the experiments are in agreement with the major frequencies obtained via analysis.

  15. Vacuum Permeator Analysis for Extraction of Tritium from DCLL Blankets

    Energy Technology Data Exchange (ETDEWEB)

    Humrickhouse, Paul Weston [Idaho National Laboratory; Merrill, Brad Johnson [Idaho National Laboratory

    2014-11-01

    It is envisioned that tritium will be extracted from DCLL blankets using a vacuum permeator. We derive here an analytical solution for the extraction efficiency of a permeator tube, which is a function of only two dimensionless numbers: one that indicates whether radial transport is limited in the PbLi or in the solid membrane, and another that is the ratio of axial and radial transport times in the PbLi. The permeator efficiency is maximized by decreasing the velocity and tube diameter, and increasing the tube length. This is true regardless of the mass transport correlation used; we review several here and find that they differ little, and the choice of correlation is not a source of significant uncertainty here. The PbLi solubility, on the other hand, is a large source of uncertainty, and we identify upper and lower bounds from the literature data. Under the most optimistic assumptions, we find that a ferritic steel permeator operating at 550 °C will need to be at least an order of magnitude larger in volume than previous conceptual designs using niobium and operating at higher temperatures.

  16. Is a Blanket Elective Single Embryo Transfer Policy Defensible?

    Directory of Open Access Journals (Sweden)

    Eli Y. Adashi

    2017-04-01

    Full Text Available For the purpose of reducing maternal and neonatal morbidity, elective single transfer (eSET in in vitro fertilization (IVF was first proposed in 1999. The purpose of this review is to summarize recent oral debate between a proponent and an opponent of expanded eSET utilization in an attempt to determine whether a blanket eSET policy, as is increasingly considered, is defensible. While eSET is preferable when possible, and agreed upon by provider and patient, selective double embryo transfer (DET must be seriously entertained if deemed more appropriate or is desired by the patient. Patient autonomy, let alone prolonged infertility and advancing age, demand nothing less. Importantly, IVF-generated twins represent only 15.7% of the national twin birth rate in the United States. Non-IVF fertility treatments have been identified as the main cause of all multiple births for quite some time. However, educational and regulatory efforts over the last decade, paradoxically, have exclusively only been directed at the practice of IVF, although IVF patient populations are rapidly aging. It is difficult to understand why non-IVF fertility treatments, usually applied to younger women, have so far escaped attention. This debate on eSET utilization in association with IVF may contribute to a redirection of priorities.

  17. Nuclear analysis of ITER Test Blanket Module Port Plug

    Energy Technology Data Exchange (ETDEWEB)

    Villari, Rosaria, E-mail: rosaria.villari@enea.it [ENEA, Fusion Technical Unit, Nuclear Technologies Laboratory, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Kim, Byoung Yoon; Barabash, Vladimir; Giancarli, Luciano; Levesy, Bruno; Loughlin, Michael; Merola, Mario [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 Saint Paul-lez-Durance Cedex (France); Moro, Fabio [ENEA, Fusion Technical Unit, Nuclear Technologies Laboratory, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Pascal, Romain [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 Saint Paul-lez-Durance Cedex (France); Petrizzi, Luigino [European Commission, DG Research & Innovation G5, CDMA 00/030, B-1049 Brussels (Belgium); Polunovsky, Eduard; Van Der Laan, Jaap G. [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 Saint Paul-lez-Durance Cedex (France)

    2015-10-15

    Highlights: • 3D nuclear analysis of the ITER TBM Port Plug (PP). • Calculations of neutron fluxes, nuclear heating, damage and He-production in TBM PP components. • Shutdown dose rate assessment with Advanced D1S method considering different configurations. • Potential design improvements to reduce the shutdown dose rate in the port interspace. - Abstract: Nuclear analyses have been performed for the ITER Test Blanket Module Port Plug (TBM PP) using the MCNP-5 Monte Carlo Code. A detailed 3D model of the TBM Port Plug with dummy TBM has been integrated into the ITER MCNP model (B-lite v.3). Neutron fluxes, nuclear heating, helium production and neutron damage have been calculated in all the TBM PP components. Global shutdown dose rate calculations have also been performed with Advanced D1S method for different configurations of the TBM PP system. This paper presents the results of these analyses and discusses potential design improvements aiming to further reduce the shutdown dose rate in the port interspace.

  18. Effect of graphite reflector on activation of fusion breeding blanket

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Cheol Woo, E-mail: cwl@kaeri.re.kr [Korea Atomic Energy Research Institute, Daeduk-daero 989, Yuseong-gu, Daejeon 305-353 (Korea, Republic of); Hanyang University, 222 Wangshimni-ro, Seongdong-gu, Seoul 133-791 (Korea, Republic of); Lee, Young-Ouk; Lee, Dong Won [Korea Atomic Energy Research Institute, Daeduk-daero 989, Yuseong-gu, Daejeon 305-353 (Korea, Republic of); Cho, Seungyon; Ahn, Mu-Young [National Fusion Research Institute, Gwahangno, Yuseong-gu, Daejeon 305-353 (Korea, Republic of)

    2016-11-01

    Highlights: • The graphite reflector concept has been applied in the design of the Korea HCCR TBM for ITER and this concept is also a candidate design option for Korea Demo. • In the graphite reflector, C-14, B-11 and Be-10 are produced after an irradiation. Impurities in both case of beryllium and graphite is dominant in the shutdown dose after an irradiation. • Based on the evaluation, the graphite reflector is a good alternative of the beryllium multiplier in the view of induced activity and shutdown dose. But C-14 produced in the graphite reflector should be considered carefully in the view of radwaste management. - Abstract: Korea has proposed a Helium-Cooled Ceramic Reflector (HCCR) breeding blanket concept relevant to fusion power plants. Here, graphite is used as a reflector material by reducing the amount of beryllium multiplier. In this paper, activity analysis was performed and the effect of graphite reflector in the view of activation was compared to the beryllium multiplier. As a result, it is expected that using the graphite reflector instead of the beryllium multiplier decreases total activity very effectively. But the graphite reflector produces C-14 about 17.2 times than the beryllium multiplier. Therefore, C-14 produced in the graphite reflector is expected as a significant nuclide in the view of radwaste management.

  19. EVOLVE - an advanced first wall/blanket system.

    Energy Technology Data Exchange (ETDEWEB)

    Khater, H.; Majumdar, S.; Malang, S.; Mattas, R. F.; Mogahed, E.; Nelson, B.; Sawan, M.; Sze, D. K.

    1999-07-21

    A new concept for an advanced fusion first wall and blanket has been identified. The key feature of the concept is the use of the heat of vaporization of lithium (about 10 times higher than water) as the primary means for capturing and removing the fusion power. A reasonable range of boiling temperatures of this alkali metal is 1200 to 1400 C, corresponding with a saturation pressure of 0.035 to 0.2 MPa. Calculations indicate that a evaporative system with Li at {approximately}1200 C can remove a first wall surface heat flux of >2 MW/m2 with an accompanying neutron wall load of >10 MW/m2. Work to date shows that the system provides adequate tritium breeding and shielding, very high thermal conversion efficiency, and low system pressure. Tungsten is used as the structural material, and it is expected to operate at a surface wall load of 2 MW/m2 at temperatures above 1200 C.

  20. The Role of Feeding Regimens in Regulating Metabolism of Sexually Mature Broiler Breeders

    Science.gov (United States)

    A trial was conducted to determine the effects of different rearing feed regimens on plasma hormone and metabolite levels and hepatic lipid metabolism and gene expression on sexually mature broiler breeders. Cobb 500 birds were divided into two groups at 4 weeks of age and fed either everyday (ED) ...

  1. Effects of breeder age and pre-incubation storage of eggs on ...

    African Journals Online (AJOL)

    Two thousand four hundred quail (Coturnix coturnix japonica) hatching eggs were used to determine the effects of breeder age and pre-incubation storage time on egg traits, hatching traits and the growth of some selected organs in newly hatched chicks. Eggs from two non-commercial flocks (aged 10 vs. 40 weeks) of the ...

  2. Perch use by broiler breeders and its implication on health and production.

    Science.gov (United States)

    Gebhardt-Henrich, S G; Toscano, M J; Würbel, H

    2017-10-01

    Broiler breeders are commonly kept without perches, although perching has been shown to be a high-priority behavior in laying hens. We studied whether broiler breeders used elevated perches of different lengths during the night and how access to perches affected health and production. Using the Ross 308 hybrid, pens offering 4 different perch spaces per bird (5, 10, 14, and 20 cm) in a cross-over design were compared with pens without perches. The number of birds on perches at midnight were recorded 7 times during production. Prevalence of keel bone fractures, breast blisters, pododermatitis, and plumage quality of hens was assessed at 45 wk, and production was monitored daily. To determine subsequent effects on offspring, chicks from hens with and without perches were reared and their growth rate was assessed. Analysis found more broiler breeders perched at night when 14 cm perch length per bird was provided than with less available perch length (P = 0.0005), but there was no difference between 14 and 20 cm per bird. Perch use declined with age from about 50 to 20% (P growth of chicks was not affected by the parent treatment. In conclusion, our results suggest that perches were chosen for roosting by broiler breeders depending on their age and did not impair production. © 2017 Poultry Science Association Inc.

  3. Effect of low-density diets on broiler breeder and offspring performance

    NARCIS (Netherlands)

    Enting, H.

    2005-01-01

    Restricted feeding of broiler breeders is required to obtain good reproductive performance. Current practical feed restriction levels can result in hunger feeling and chronic stress, particularly during the rearing period. On the basis of literature data, low-density diets might improve bird

  4. Atoms in Appalachia. Historical report on the Clinch River Breeder Reactor site

    Energy Technology Data Exchange (ETDEWEB)

    Schaffer, D

    1982-01-01

    The background information concerning the acquisition of the land for siting the Clinch River Breeder Reactor is presented. Historical information is also presented concerning the land acquisition for the Oak Ridge facilities known as the Manhattan Project during World War II.

  5. Effects of restricted feeding on physiological stress parameters in growing broiler breeders

    NARCIS (Netherlands)

    Jong, de I.C.; Voorst, van S.; Ehlhardt, D.A.; Blokhuis, H.J.

    2002-01-01

    In previous studies, a lack of agreement in measurements of plasma corticosterone concentrations and heterophil:lymphocyte (H/L) ratio as physiological indices of stress, caused by hunger and frustration in restricted-fed broiler breeders, was observed. It could be suggested that the differences

  6. Do Low-Density Diets Improve Broiler Breeder Welfare During Rearing and Laying.

    NARCIS (Netherlands)

    Jong, de I.C.; Enting, H.; Voorst, van A.; Blokhuis, H.J.

    2005-01-01

    Low-density diets may improve welfare of restricted fed broiler breeders by increasing feed intake time with less frustration of feed intake behavior as a result. Moreover, low-density diets may promote satiety through a more filled gastrointestinal tract, and thus feelings of hunger may be reduced.

  7. A model for an economically optimal replacement of a breeder flock

    NARCIS (Netherlands)

    Yassin, H.; Velthuis, A.G.J.; Giesen, G.W.J.; Oude Lansink, A.G.J.M.

    2012-01-01

    A deterministic model is developed to support the tactical and operational replacement decisions at broiler breeder farms. The marginal net revenue approach is applied to determine the optimal replacement age of a flock. The objective function of the model maximizes the annual gross margin over the

  8. Comparative analysis as a management tool for broiler breeder farms: simulated individual farm analysis (IFAS)

    NARCIS (Netherlands)

    Yassin, H.; Velthuis, A.G.J.; Giesen, G.W.J.; Oude Lansink, A.G.J.M.

    2012-01-01

    The objective of this study was to develop a management information system to evaluate the tactical management of a breeder flock using individual farm analysis with a deterministic simulation model (IFAS). Individual farm analysis is a method that evaluates the performance of individual farms by

  9. Harvest and group effects on pup survival in a cooperative breeder

    Science.gov (United States)

    Ausband, David E.; Mitchell, Michael S.; Stansbury, Carisa R.; Stenglein, Jennifer L.; Waits, Lisette P.

    2017-01-01

    Recruitment in cooperative breeders can be negatively affected by changes in group size and composition. The majority of cooperative breeding studies have not evaluated human harvest; therefore, the effects of recurring annual harvest and group characteristics on survival of young are poorly understood. We evaluated how harvest and groups affect pup survival using genetic sampling and pedigrees for grey wolves in North America. We hypothesized that harvest reduces pup survival because of (i) reduced group size, (ii) increased breeder turnover and/or (iii) reduced number of female helpers. Alternatively, harvest may increase pup survival possibly due to increased per capita food availability or it could be compensatory with other forms of mortality. Harvest appeared to be additive because it reduced both pup survival and group size. In addition to harvest, turnover of breeding males and the presence of older, non-breeding males also reduced pup survival. Large groups and breeder stability increased pup survival when there was harvest, however. Inferences about the effect of harvest on recruitment require knowledge of harvest rate of young as well as the indirect effects associated with changes in group size and composition, as we show. The number of young harvested is a poor measure of the effect of harvest on recruitment in cooperative breeders.

  10. Engineering review of the core support structure of the Gas Cooled Fast Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-09-01

    The review of the core support structure of the gas cooled fast breeder reactor (GCFR) covered such areas as the design criteria, the design and analysis of the concepts, the development plan, and the projected manufacturing costs. Recommendations are provided to establish a basis for future work on the GCFR core support structure.

  11. Nuclear Engineering Computer Modules, Thermal-Hydraulics, TH-2: Liquid Metal Fast Breeder Reactors.

    Science.gov (United States)

    Reihman, Thomas C.

    This learning module is concerned with the temperature field, the heat transfer rates, and the coolant pressure drop in typical liquid metal fast breeder reactor (LMFBR) fuel assemblies. As in all of the modules of this series, emphasis is placed on developing the theory and demonstrating the use with a simplified model. The heart of the module is…

  12. Effects of high fibre diets on gut fill, behaviour and productivity in broiler breeders

    DEFF Research Database (Denmark)

    Steenfeldt, Sanna; Nielsen, Birte Lindstrøm

    , and the higher water content of their litter may have affected their thermoregulation. In exp. II, four diets based on different fibre sources were given to broiler breeders from day 12 to 19 weeks of age to increase feed quantity. Diet A (commercial control diet: 10.7MJ/kg), B (42% dietary fibre (DF); 7.25MJ...

  13. The effect of age at photostimulation of male broiler breeders on ...

    African Journals Online (AJOL)

    Male broiler breeders were photostimulated at different ages (56, 77, 98, 119, 147 and 161 d) during the period of growth prior to achieving sexual maturity to observe their response to photoperiod stimulation. Birds were sampled at regular intervals to measure the average testis weight - these values responding ...

  14. Intestinal spirochaetes (Brachyspira spp.) colonizing flocks of layer and breeder chickens in Malaysia.

    Science.gov (United States)

    Amin, Maswati Mat; Phillips, Nyree D; La, Tom; Robertson, Ian D; Hampson, David J

    2014-01-01

    Avian intestinal spirochaetosis causes problems including delayed onset of lay and wet litter in adult chickens, and results from colonization of the caecae/rectum with pathogenic intestinal spirochaetes (genus Brachyspira). Because avian intestinal spirochaetosis has not previously been studied in South East Asia, this investigation was undertaken in Malaysia. Faecal samples were collected from 25 farms and a questionnaire was administered. Brachyspira species were detected by polymerase chain reaction in 198 of 500 (39%) faecal samples from 20 (80%) farms, including 16 (94%) layer and four (50%) breeder farms. Pathogenic Brachyspira pilosicoli was identified in five (29%) layer and two (25%) breeder farms whilst pathogenic Brachyspira intermedia was detected in nine (53%) layer and one (12.5%) of the breeder farms. Twelve (80%) layer farms had egg production problems and 11 (92%) were positive for Brachyspira: three (25%) for B. pilosicoli and six (50%) for B. intermedia. Of three breeder farms with egg production problems, one was colonized with B. pilosicoli. Three of ten layer farms with wet litter were positive for B. pilosicoli and six for B. intermedia. Of four breeder farms with wet litter, one was colonized with B. pilosicoli and one with B. intermedia. No significant associations were found between colonization and reduced egg production or wet litter, perhaps because so many flocks were colonized. A significant association (P = 0.041) occurred between a high prevalence of colonization and faecal staining of eggs. There were significant positive associations between open-sided housing (P = 0.006), and flocks aged >40 weeks (P colonization by pathogenic species.

  15. A passively-safe fusion reactor blanket with helium coolant and steel structure

    Energy Technology Data Exchange (ETDEWEB)

    Crosswait, Kenneth Mitchell [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    1994-04-01

    Helium is attractive for use as a fusion blanket coolant for a number of reasons. It is neutronically and chemically inert, nonmagnetic, and will not change phase during any off-normal or accident condition. A significant disadvantage of helium, however, is its low density and volumetric heat capacity. This disadvantage manifests itself most clearly during undercooling accident conditions such as a loss of coolant accident (LOCA) or a loss of flow accident (LOFA). This thesis describes a new helium-cooled tritium breeding blanket concept which performs significantly better during such accidents than current designs. The proposed blanket uses reduced-activation ferritic steel as a structural material and is designed for neutron wall loads exceeding 4 MW/m{sup 2}. The proposed geometry is based on the nested-shell concept developed by Wong, but some novel features are used to reduce the severity of the first wall temperature excursion. These features include the following: (1) A ``beryllium-joint`` concept is introduced, which allows solid beryllium slabs to be used as a thermal conduction path from the first wall to the cooler portions of the blanket. The joint concept allows for significant swelling of the beryllium (10 percent or more) without developing large stresses in the blanket structure. (2) Natural circulation of the coolant in the water-cooled shield is used to maintain shield temperatures below 100 degrees C, thus maintaining a heat sink close to the blanket during the accident. This ensures the long-term passive safety of the blanket.

  16. Initial design and test of the tritium breeder monitoring system for the lead-lithium cooled ceramic breeder (LLCB) module of the ITER

    Energy Technology Data Exchange (ETDEWEB)

    Kapyshev, V., E-mail: kapyshev@nikiet.ru [Federal State Unitary Enterprise “Dollezhal Research and Development Institute of Power Engineering”, PO Box 788, Moscow 101000 (Russian Federation); Danilov, I.; Kartashev, I.; Kovalenko, V.; Leshukov, A.; Poliksha, V.; Razmerov, A.; Strebkov, Yu.; Sviridenko, M.; Trusova, E.; Vladimirova, N. [Federal State Unitary Enterprise “Dollezhal Research and Development Institute of Power Engineering”, PO Box 788, Moscow 101000 (Russian Federation); Kalashnikov, A. [Rosatom (Russian Federation)

    2013-10-15

    Highlights: • We propose a system for measurement of tritium-breeding dynamics in module of the ITER. • Lithium carbonate sensors and neutron detectors are used for the measurements. • The sensors and detectors are irradiated by neutrons under ITER plasma operations. • A pneumatic concept is suggested for conveying of the samples in the module. • The results of the tritium measurements in the sensors after irradiation are discussed. -- Abstract: The demonstration of a tritium breeder is an important part of an ITER mission. A concept for an experimental estimation of the tritium-breeding ratio (TBR) and the tritium-breeding dynamics in a test breeder module (TBM) of ITER has been developed. A system for the experimental estimation of the values is proposed for the lead–lithium cooled ceramic breeder (LLCB) TBM of ITER. The system is based on tritium breeder and neutron flux measurements under ITER plasma D-T experiments and the use of lithium carbonate sensors and neutron detectors. Three capsules with lithium carbonate (Li{sub 2}CO{sub 3}) containing different relative abundances of lithum-6 and lithium-7 (Li-6/Li-7 ratios of that found in nature: 1/1 and 9/1) and three capsules with neutron detectors are placed in a container. The low-level activities of the structural materials of the container and the capsules are used to prevent operation in a hot cell after the reactor irradiation of the container. For the delivery/withdrawal of the containers into/from the TBM, a pneumatic concept is suggested with a monitor channel connecting the TBM and an operating zone for conveying the containers in the TBM before the pulse and extracting them after the pulse. The initial design of the container with the capsules for the samples and the channel part in the TBM are presented in this paper. A laboratory facility for the investigation of the pneumatic parameters and the container moving in the channel is proposed. Neutron calculation is performed to estimate

  17. Liquid metal blanket module testing and design for ITER/TIBER II

    Energy Technology Data Exchange (ETDEWEB)

    Mattas, R.F.; Cha, Y.; Finn, P.A.; Majumdar, S.; Picologlou, B.; Stevens, H.; Turner, L.

    1988-05-01

    A major goal for ITER is the testing of nuclear components to demonstrate the integrated performance of the most attractive concepts that can lead to a commercial fusion reactor. As part of the ITER/TIBER II study, the test program and design of test models were examined for a number of blanket concepts. The work at Argonne National Laboratory focused on self-cooled liquid metal blankets. A test program for liquid metal blankets was developed based upon the ITER/TIBER II operating schedule and the specific data needs to resolve the key issues for liquid metals. Testing can begin early in reactor operation with liquid metal MHD tests to confirm predictive capability. Combined heat transfer/MHD tests can be performed during initial plasma operation. After acceptable heat transfer performance is verified, tests to determine the integrated high temperature performance in a neutron environment can begin. During the high availability phase operation, long term performance and reliability tests will be performed. It is envisioned that a companion test program will be conducted outside ITER to determine behavior under severe accident conditions and upper performance limits. A detailed design of a liquid metal test module and auxiliary equipment was also developed. The module followed the design of the TPSS blanket. Detailed analysis of the heat transfer and tritium systems were performed, and the overall layout of the systems was determined. In general, the blanket module appears to be capable of addressing most of the testing needs. 8 refs., 27 figs., 11 tabs.

  18. Blanketing effect of expansion foam on liquefied natural gas (LNG) spillage pool

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Bin; Liu, Yi [Mary Kay O’Connor Process Safety Center, Artie McFerrin Department of Chemical Engineering, Texas A and M University System, College Station, TX 77843-3122 (United States); Olewski, Tomasz; Vechot, Luc [Mary Kay O’Connor Process Safety Center - Qatar, Texas A and M University at Qatar, PO Box 23874, Doha (Qatar); Mannan, M. Sam, E-mail: mannan@tamu.edu [Mary Kay O’Connor Process Safety Center, Artie McFerrin Department of Chemical Engineering, Texas A and M University System, College Station, TX 77843-3122 (United States)

    2014-09-15

    Highlights: • Reveal the existence of blocking effect of high expansion foam on an LNG pool. • Study the blanketing effect of high expansion foam quantitatively. • Correlate heat flux for vaporization with foam breaking rate. • Propose the physical mechanism of blanketing effect. - Abstract: With increasing consumption of natural gas, the safety of liquefied natural gas (LNG) utilization has become an issue that requires a comprehensive study on the risk of LNG spillage in facilities with mitigation measures. The immediate hazard associated with an LNG spill is the vapor hazard, i.e., a flammable vapor cloud at the ground level, due to rapid vaporization and dense gas behavior. It was believed that high expansion foam mitigated LNG vapor hazard through warming effect (raising vapor buoyancy), but the boil-off effect increased vaporization rate due to the heat from water drainage of foam. This work reveals the existence of blocking effect (blocking convection and radiation to the pool) to reduce vaporization rate. The blanketing effect on source term (vaporization rate) is a combination of boil-off and blocking effect, which was quantitatively studied through seven tests conducted in a wind tunnel with liquid nitrogen. Since the blocking effect reduces more heat to the pool than the boil-off effect adds, the blanketing effect contributes to the net reduction of heat convection and radiation to the pool by 70%. Water drainage rate of high expansion foam is essential to determine the effectiveness of blanketing effect, since water provides the boil-off effect.

  19. Amino acid requirements of broiler breeders at peak production for egg mass, body weight, and fertility.

    Science.gov (United States)

    Ekmay, R D; De Beer, M; Mei, S J; Manangi, M; Coon, C N

    2013-04-01

    Two trials were conducted to determine the amino acid and protein requirements of broiler breeders at peak production. In trial 1, 32-wk-old Cobb 500 broiler breeders with similar BW were selected to determine the digestible amino acid requirement for daily product output (g of egg mass + g of BW gain/b/d) and feed conversion (g of feed/g of product) for Met, Phe, Arg, Ile, Lys, and CP in a 42-d production study. In trial 2, 30-wk-old Cobb 500 broiler breeders were selected to determine the digestible requirement for Met, Lys, Ile, Arg, Cys, Val, Trp, and Thr in a 70-d production study. Breeders were given a corn-soy basal diet plus crystalline amino acids with 8 graded levels of amino acids (10 birds per level), representing 40 to 130% of the highest suggested requirements reported in the literature. All other amino acids were maintained at 100% of their suggested requirement level. All breeders were inseminated weekly and fertility was determined. A third trial consisted of 41-wk-old colostomized hens randomly assigned to 1 of 2 diets differing only in the amount of Ile. Urine was collected after a 6-wk feeding period. The average digestible requirements per breeder per day for both product and feed/product ratio from trials 1 and 2 for Met, Cys, TSAA, Phe, Phe + Tyr, Trp, Arg, Ile, Lys, Val, Thr, and CP were 424, 477, 901, 689, 997, 252, 1,026, 830, 916, 799, 613 mg/d, and 20.0 g/d, respectively. The ideal profile for digestible Met, Cys, TSAA, Phe, Phe + Tyr, Trp, Arg, Ile, Lys, Val, and Thr was 46, 52, 98, 76, 108, 28, 112.0, 91, 100.0, 87, and 67%, respectively. A significant decrease in fertility was noted with increasing levels of Ile and Lys. Urine pH was significantly more alkaline in hens fed the higher level of Ile. It is suggested that adequate dietary Lys and Ile should be provided for maximum hatching egg production but an excess may affect fertility.

  20. Q Fever (Coxiella burnetii) Knowledge and Attitudes of Australian Cat Breeders and Their Husbandry Practices.

    Science.gov (United States)

    Shapiro, A J; Norris, J M; Bosward, K L; Heller, J

    2017-06-01

    A Q fever outbreak in a small animal veterinary hospital, associated with a cat caesarean section, initiated a cat seroprevalence study (n = 712) that found circulating antibodies to Coxiella burnetii was highest in cattery-confined breeding cats (9.3%). These findings stimulated interest about potential sources of C. burnetii infection for cats and humans associated with cats. Cat breeders are potentially a group at increased risk of C. burnetii infection, and this study sought to identify potential risk factors. A cross-sectional online survey was conducted targeting all domestic cat breeders registered with an affiliate member body in Australia in 2015. Responses from 177 cat breeders across Australia were analysed. Forty per cent of responding cat breeders had not heard of Q fever. Raw meat was fed as an integral constituent of the diet by 89% of respondents. Eighty per cent of respondents allowed queens access to the home for parturition, and assistance of queens and resuscitation of kittens at the time of birth were reported by 97% of respondents. Respondents who perceived some level of exposure to Q fever through their breeding activities were three times less likely to perform mouth-to-snout resuscitation (OR 0.3 95% CI 0.1-0.9; P = 0.034) than those who did not perceive a risk of exposure. Similarly, respondents who perceived Q fever as a risk through breeding activities were close to eight times more likely to use personal protective equipment during parturition (OR 7.7 95% CI 1.5-39.9; P = 0.015) than those who did not. Husbandry practices of cat breeders that may increase the risk of C. burnetii transmission require further targeted investigations to assess the contribution of these risk factors to the acquisition of disease. Concurrent education forums are recommended to inform Australian cat breeders of the aetiopathogenesis of Q fever. © 2016 Blackwell Verlag GmbH.

  1. Management of horses with focus on blanketing and clipping practices reported by members of the Swedish and Norwegian equestrian community.

    Science.gov (United States)

    Hartmann, E; Bøe, K E; Jørgensen, G H M; Mejdell, C M; Dahlborn, K

    2017-03-01

    Limited information is available on the extent to which blankets are used on horses and the owners' reasoning behind clipping the horse's coat. Research on the effects of those practices on horse welfare is scarce but results indicate that blanketing and clipping may not be necessary from the horse's perspective and can interfere with the horse's thermoregulatory capacities. Therefore, this survey collected robust, quantitative data on the housing routines and management of horses with focus on blanketing and clipping practices as reported by members of the Swedish and Norwegian equestrian community. Horse owners were approached via an online survey, which was distributed to equestrian organizations and social media. Data from 4,122 Swedish and 2,075 Norwegian respondents were collected, of which 91 and 84% of respondents, respectively, reported using blankets on horses during turnout. Almost all respondents owning warmblood riding horses used blankets outdoors (97% in Sweden and 96% in Norway) whereas owners with Icelandic horses and coldblood riding horses used blankets significantly less ( horse's coat was clipped by 67% of respondents in Sweden and 35% of Norwegian respondents whereby owners with warmblood horses and horses primarily used for dressage and competition reported clipping the coat most frequently. In contrast to scientific results indicating that recovery time after exercise increases with blankets and that clipped horses have a greater heat loss capacity, only around 50% of respondents agreed to these statements. This indicates that evidence-based information on all aspects of blanketing and clipping has not yet been widely distributed in practice. More research is encouraged, specifically looking at the effect of blankets on sweaty horses being turned out after intense physical exercise and the effect of blankets on social interactions such as mutual grooming. Future efforts should be tailored to disseminate knowledge more efficiently, which can

  2. Evaluation of the efficacy of an autogenous Escherichia coli vaccine in broiler breeders

    DEFF Research Database (Denmark)

    Li, Lili; Thøfner, Ida; Christensen, Jens Peter

    2017-01-01

    In poultry production Escherichia coli autogenous vaccines are often used. However, the efficacy of autogenous E. coli vaccinations has not been evaluated experimentally in chickens after start of lay. The aim of the present study was to evaluate the protective effect of an autogenous E. coli...... vaccine in broiler breeders. Three groups of 28 weeks old broiler breeders (unvaccinated, vaccinated once and twice, respectively) were challenged with a homologous E. coli strain (same strain as included in the vaccine) or a heterologous challenge strain in an experimental ascending model. The clinical...... outcome was most pronounced in the unvaccinated group; however, the vast majority of chickens in the vaccinated groups had severe pathological manifestations similar to findings in the unvaccinated group after challenge with a homologous as well as a heterologous E. coli strain. Although significant titer...

  3. Effect of climatic variables on production and reproduction traits of colored broiler breeder poultry.

    Science.gov (United States)

    Nayak, G D; Behura, N C; Sardar, K K; Mishra, P K

    2015-04-01

    The present study was conducted to investigate the important climatic variables affecting production and reproduction in a broiler breeder flock. The experiment was conducted for a period of 1 year on colored synthetic female line male and female poultry birds. 630 female progeny and 194 male progenies from 69 sires and 552 dams produced in four consecutive hatches at an interval of 10 days were used for the present study. Each of the seven, body weight and reproduction traits were regressed with nine environmental variables. Initially, the data were subjected to hatch effect and sire effect corrections through best linear unbiased estimator (BLUE) method and, then, multiple linear regressions of environmental variables on each trait were applied. The overall regression was significant (pvariables except maximum temperature and minimum temperature were significant (pvariables play a significant role in production and reproduction of breeder broiler poultry. Controlling these variables in adverse weathers may increase production.

  4. Brewer's Grain from Cameroon Brewery in Breeder Chicken Rations : Effect on Productive and Reproductive Performance

    Directory of Open Access Journals (Sweden)

    Mafeni, MJ.

    2001-01-01

    Full Text Available In order to evaluate the effect of brewer's dried grain (BDG on the productive and reproductive traits in breeder chickens, 120 laying hens and 12 cocks of ISA commercial breed were subjected to dietary treatments containing 0, 10, 20, and 30 % levels of BDG. Feed and water were provided ad libitum over the 5-months experimental period. Reproductive and productive traits such as egg production, egg weight, albumen height, shell weight, semen quantity fertility and hatchability of fertile eggs were measured. Results indicated that when BDG was fed at the 30 % level in the ration, the hen-day egg production (50.6 % was significantly (P of inclusion. There was a significant (P 0.05 was noticed between treatments for ratio of shell weight to egg weight, albumen height, semen quantity and fertility. The results suggest that although the 30 % level of BDG can be tolerated, the 20 %, level of BDG inclusion is more appropriate for breeder birds.

  5. A Rare Case Report of duplicate Vents in a Broiler Breeder Hen (Case Report

    Directory of Open Access Journals (Sweden)

    Madadi MS

    2014-12-01

    Full Text Available Malformations which occur during the development of the avian body organs can lead to structural and functional abnormalities. Most defects are recognized at hatching, but some go undetected until somewhat later. The cause of the majority of animal congenital malformations is unknown. A significant proportion of congenital malformations of unknown cause are likely to have an important genetic component. Malformations of the gastrointestinal and urogenital systems have been observed. This report describes a rare case of duplicate vents in a broiler breeder 33 week-old hen. A normal calcified egg was present in the left oviduct and right oviduct was atrophied. Both cloaca were anatomically normal, and each of them had a complete structure of coprodeum, urodeum and proctodeum. Double vents’ anomalies in breeder hens were only reported by Crew and Roberts in 1928 - 1929 and have not been reported after this time yet.

  6. Uranium resources and their implications for fission breeder and fusion hybrid development

    Energy Technology Data Exchange (ETDEWEB)

    Max, C.E.

    1984-05-15

    Present estimates of uranium resources and reserves in the US and the non-Communist world are reviewed. The resulting implications are considered for two proposed breeder technologies: the liquid metal fast breeder reactor (LMFBR) and the fusion hybrid reactor. Using both simple arguments and detailed scenarios from the published literature, conditions are explored under which the LMFBR and fusion hybrid could respectively have the most impact, considering both fuel-supply and economic factors. The conclusions emphasize strong potential advantages of the fusion hybrid, due to its inherently large breeding rate. A discussion is presented of proposed US development strategies for the fusion hybrid, which at present is far behind the LMFBR in its practical application and maturity.

  7. Clinical outbreak of Bordetella avium infection in two turkey breeder flocks.

    Science.gov (United States)

    Kelly, B J; Ghazikhanian, G Y; Mayeda, B

    1986-01-01

    An acute upper respiratory disease was observed in two broad-breasted white (BBW) turkey primary breeder flocks. Associated clinical signs included sneezing, depression, and a deep dry cough originating from large conducting airways. Morbidity reached approximately 15-20% of the hens in an affected house. None of the turkeys died, and total feed consumption was not affected. A minimal effect upon egg production was noticed. Sera from an acutely affected flock exhibited a marked rise in titer to Bordetella avium compared with preinfection sera samples. In Case 1, B. avium was isolated in pure culture from affected birds. In Case 2, B. avium was diagnosed by serological results and clinical signs; bacteriological examination was not attempted. The findings presented here are consistent with an acute clinical outbreak of B. avium-induced turkey rhinotracheitis (turkey coryza) in BBW turkey breeder hens.

  8. Nuclear-thermal-coupled optimization code for the fusion breeding blanket conceptual design

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jia, E-mail: lijia@ustc.edu.cn [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027, Anhui (China); Jiang, Kecheng; Zhang, Xiaokang [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, Anhui (China); Nie, Xingchen [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027, Anhui (China); Zhu, Qinjun; Liu, Songlin [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, Anhui (China)

    2016-12-15

    Highlights: • A nuclear-thermal-coupled predesign code has been developed for optimizing the radial build arrangement of fusion breeding blanket. • Coupling module aims at speeding up the efficiency of design progress by coupling the neutronics calculation code with the thermal-hydraulic analysis code. • Radial build optimization algorithm aims at optimal arrangement of breeding blanket considering one or multiple specified objectives subject to the design criteria such as material temperature limit and available TBR. - Abstract: Fusion breeding blanket as one of the key in-vessel components performs the functions of breeding the tritium, removing the nuclear heat and heat flux from plasma chamber as well as acting as part of shielding system. The radial build design which determines the arrangement of function zones and material properties on the radial direction is the basis of the detailed design of fusion breeding blanket. For facilitating the radial build design, this study aims for developing a pre-design code to optimize the radial build of blanket with considering the performance of nuclear and thermal-hydraulic simultaneously. Two main features of this code are: (1) Coupling of the neutronics analysis with the thermal-hydraulic analysis to speed up the analysis progress; (2) preliminary optimization algorithm using one or multiple specified objectives subject to the design criteria in the form of constrains imposed on design variables and performance parameters within the possible engineering ranges. This pre-design code has been applied to the conceptual design of water-cooled ceramic breeding blanket in project of China fusion engineering testing reactor (CFETR).

  9. Design of the helium cooled lithium lead breeding blanket in CEA: from TBM to DEMO

    Science.gov (United States)

    Aiello, G.; Aubert, J.; Forest, L.; Jaboulay, J.-C.; Li Puma, A.; Boccaccini, L. V.

    2017-04-01

    The helium cooled lithium lead (HCLL) blanket concept was originally developed in CEA at the beginning of 2000: it is one of the two European blanket concepts to be tested in ITER in the form of a test blanket module (TBM) and one of the four blanket concepts currently being considered for the DEMOnstration reactor that will follow ITER. The TBM is a highly optimized component for the ITER environment that will provide crucial information for the development of the DEMO blanket, but its design needs to be adapted to the DEMO reactor. With respect to the TBM design, reduction of the steel content in the breeding zone (BZ) is sought in order to maximize tritium breeding reactions. Different options are being studied, with the potential of reaching tritium breeding ratio (TBR) values up to 1.21. At the same time, the design of the back supporting structure (BSS), which is a DEMO specific component that has to support the blanket modules inside the vacuum vessel (VV), is ongoing with the aim of maximizing the shielding power and minimizing pumping power. This implies a re-engineering of the modules’ attachment system. Design changes however, will have an impact on the manufacturing and assembly sequences that are being developed for the HCLL-TBM. Due to the differences in joint configurations, thicknesses to be welded, heat dissipation and the various technical constraints related to the accessibility of the welding tools and implementation of non-destructive examination (NDE), the manufacturing procedure should be adapted and optimized for DEMO design. Laser welding instead of TIG could be an option to reduce distortions. The time-of-flight diffraction (TOFD) technique is being investigated for NDE. Finally, essential information expected from the HCLL-TBM program that will be needed to finalize the DEMO design is discussed.

  10. Effects of guanidinoacetic acid diet supplementation on semen quality and fertility of broiler breeder roosters.

    Science.gov (United States)

    Tapeh, Ramin Shahabi; Zhandi, Mahdi; Zaghari, Mojtaba; Akhlaghi, Amir

    2017-02-01

    Decreased semen quality and fertility rate is a common feature in broiler breeder roosters. This decrease is associated with dysfunction of Sertoli cells and defective spermatogenesis. Guanidinoacetic acid (GAA), as a precursor of creatine, plays an important role in the proper functioning of Sertoli cells and energy metabolism in sperm. Twenty, 29-wk-old broiler breeder roosters (Ross 308) were randomly allotted to 4 treatment groups and fed diets supplemented with different levels of GAA, including 0 (GAA-0), 600 (GAA-600), 1200 (GAA-1200), and 1800 (GAA-1800) mg GAA/kg of diet for 26 successive weeks. During a 24-wk period, the seminal characteristics were weekly evaluated. At the end of experiment, sperm penetration and fertility rates were determined, using 68 artificially inseminated age-matched broiler breeder hens of the same strain (for 2 weeks). Semen concentration (P = 0.003), total sperm number (P = 0.005) and sperm forward motility (P = 0.01) were increased by GAA-1200 group. Also, sperm plasma membrane functionality was marginally affected (P = 0.06) in roosters received all levels of GAA. Sperm abnormality and plasma membrane integrity were not affected by dietary GAA. The highest number of sperm penetration holes was recorded for the GAA-1200 group (P = 0.08). Interestingly, fertility rate was increased by the feeding of all levels of GAA (P = 0.01). In conclusion, dietary GAA was associated with improvement in most of the rooster's seminal characteristics and fertility rate, suggesting a potential for using GAA to attenuate the age-related sub-fertility in commercial broiler breeder roosters. Copyright © 2016 Elsevier Inc. All rights reserved.

  11. CerealsDB 2.0: an integrated resource for plant breeders and scientists

    Directory of Open Access Journals (Sweden)

    Wilkinson Paul A

    2012-09-01

    Full Text Available Abstract Background Food security is an issue that has come under renewed scrutiny amidst concerns that substantial yield increases in cereal crops are required to feed the world’s booming population. Wheat is of fundamental importance in this regard being one of the three most important crops for both human consumption and livestock feed; however, increase in crop yields have not kept pace with the demands of a growing world population. In order to address this issue, plant breeders require new molecular tools to help them identify genes for important agronomic traits that can be introduced into elite varieties. Studies of the genome using next-generation sequencing enable the identification of molecular markers such as single nucleotide polymorphisms that may be used by breeders to identify and follow genes when breeding new varieties. The development and application of next-generation sequencing technologies has made the characterisation of SNP markers in wheat relatively cheap and straightforward. There is a growing need for the widespread dissemination of this information to plant breeders. Description CerealsDB is an online resource containing a range of genomic datasets for wheat (Triticum aestivum that will assist plant breeders and scientists to select the most appropriate markers for marker assisted selection. CerealsDB includes a database which currently contains in excess of 100,000 putative varietal SNPs, of which several thousand have been experimentally validated. In addition, CerealsDB contains databases for DArT markers and EST sequences, and links to a draft genome sequence for the wheat variety Chinese Spring. Conclusion CerealsDB is an open access website that is rapidly becoming an invaluable resource within the wheat research and plant breeding communities.

  12. Plutonium Worlds. Fast Breeders, Systems Analysis and Computer Simulation in the Age of Hypotheticality

    Directory of Open Access Journals (Sweden)

    Sebastian Vehlken

    2014-09-01

    Full Text Available This article examines the media history of one of the hallmark civil nuclear energy programs in Western Germany – the development of Liquid Metal Fast Breeder Reactor (LMFBR technology. Promoted as a kind of perpetuum mobile of the Atomic Age, the "German Manhattan Project" not only imported big science thinking. In its context, nuclear technology was also put forth as an avantgarde of scientific inquiry, dealing with the most complex and critical technological endeavors. In the face of the risks of nuclear technology, German physicist Wolf Häfele thus announced a novel epistemology of "hypotheticality". In a context where traditional experimental engineering strategies became inappropiate, he called for the application of advanced media technologies: Computer Simulations (CS and Systems Analysis (SA generated computerized spaces for the production of knowledge. In the course of the German Fast Breeder program, such methods had a twofold impact. One the one hand, Häfele emphazised – as the "father of the German Fast Breeder" – the utilization of CS for the actual planning and construction of the novel reactor type. On the other, namely as the director of the department of Energy Systems at the International Institute for Applied Systems Analysis (IIASA, Häfele advised SA-based projections of energy consumption. These computerized scenarios provided the rationale for the conception of Fast Breeder programs as viable and necessary alternative energy sources in the first place. By focusing on the role of the involved CS techniques, the paper thus investigates the intertwined systems thinking of nuclear facilities’s planning and construction and the design of large-scale energy consumption and production scenarios in the 1970s and 1980s, as well as their conceptual afterlives in our contemporary era of computer simulation.

  13. Economic Assessment of Russian Nuclear Strategies on the Basis of Fast Breeder Reactors

    Directory of Open Access Journals (Sweden)

    O. V. Marchenko

    2013-01-01

    Full Text Available The paper assesses the economic risk caused by the delay in commissioning innovative nuclear power plants with fast breeder reactors in Russia. The risk is quantitatively measured by the excessive costs for energy development and the possibility of implementing the considered variants that differ in power consumption, technical and economic indices of the reactors, and constraints on CO2 emissions. The probability distribution functions of economic losses for different strategies of nuclear energy development are constructed.

  14. Spondylitis in broiler breeder farms in West-Azerbaijan province, Iran: Clinical Report

    OpenAIRE

    Talebi, Alireza; Taifebagherlu, Jafar; Sharifi, Arian; Delkhosh-Kasmaie, Fatemeh

    2016-01-01

    Spondylitis is a reemerging epidemic spinal infection in male broiler chickens (5 to 7 weeks of age) as well as broiler breeder roosters (15 to 18 weeks of age). Among various causative agents, Enterococcus species and in particular E. cecorum, a gram-positive bacterium as a gastrointestinal flora of birds, have mostly been isolated. On late September 2015, a number of 10 weeks old roosters with characteristic clinical signs of lameness and hock-sitting posture were autopsied. During thorough...

  15. Plutonium Worlds. Fast Breeders, Systems Analysis and Computer Simulation in the Age of Hypotheticality

    OpenAIRE

    Sebastian Vehlken

    2014-01-01

    This article examines the media history of one of the hallmark civil nuclear energy programs in Western Germany – the development of Liquid Metal Fast Breeder Reactor (LMFBR) technology. Promoted as a kind of perpetuum mobile of the Atomic Age, the "German Manhattan Project" not only imported big science thinking. In its context, nuclear technology was also put forth as an avantgarde of scientific inquiry, dealing with the most complex and critical technological endeavors. In the face of the ...

  16. Evaluation of heat transfer characteristics of a sphere-packed pipe for Flibe blanket

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, Atsushi, E-mail: awata@karma.qse.tohoku.ac.jp [Tohoku University, Sendai (Japan); Ebara, Shinji [Tohoku University, Sendai (Japan); Sagara, Akio [National Institute for Fusion Science, Toki (Japan); Hashizume, Hidetoshi [Tohoku University, Sendai (Japan)

    2013-10-15

    A Flibe blanket has been proposed to be used in FFHR. Since Flibe has poor heat transfer performance, heat transfer promoter is required, and a sphere-packed pipe (SPP) has been proposed to enhance the heat transfer performance in the Flibe blanket. In this paper, the fluid flow and heat transfer characteristics in the SPP is evaluated numerically using a k–ε turbulent model for the flow field and an algebraic model for the thermal field. As a result, it was shown that bypass flows in the SPP play a significant role in heat transfer. Also it is thought that the turbulent energy can strongly affect heat transfer performance.

  17. Treatment of slaughterhouse wastewater in an upflow anaerobic sludge blanket reactor: Sludge characteristics

    OpenAIRE

    Mohammad Mehdi Amin; Nasim Rafiei; Ensiyeh Taheri

    2016-01-01

    Aims: Present study was done by using upflow anaerobic sludge blanket (UASB) reactor to investigate the effect of influent chemical oxygen demand (COD) and organic load rate on the formation of anaerobic granules in wastewater treatment. Martials and Methods: Upflow anaerobic sludge blanket reactor with working volume 30 L was studied using actual slaughterhouse wastewater at a hydraulic retention time of 1.24 d and at temperatures in the range of 35°C ± 0.5°C for 320 days. The inoculum wa...

  18. Effects of breeder age, strain, and eggshell temperature on nutrient metabolism of broiler embryos.

    Science.gov (United States)

    Nangsuay, A; Meijerhof, R; van den Anker, I; Heetkamp, M J W; Kemp, B; van den Brand, H

    2017-06-01

    Breeder age and broiler strain influence the availability of nutrients and oxygen through yolk size and eggshell conductance, and the effects of these egg characteristics on nutrient metabolism might be influenced by eggshell temperature (EST). This study aims to determine effects of breeder age, strain, and EST on nutrient metabolism of embryos. A study was designed as a 2 × 2 × 2 factorial arrangement using four batches of in total 4,464 hatching eggs of 2 flock ages at 29 to 30 wk (young) and 54 to 55 wk (old) of Ross 308 and Cobb 500. EST of 37.8 (normal) or 38.9°C (high) was applied from incubation day 7 (E7) until hatching. Wet yolk weight was determined mainly by breeder age (P = 0.043). Energy content in yolk (P = 0.004) and albumen + yolk (P = 0.005) were higher in old flock eggs than in young flock eggs, but did not differ between broiler strains. Eggshell conductance was higher in Ross 308 eggs than in Cobb 500 eggs (P availability of oxygen could have contributed to these differences. © 2016 Poultry Science Association Inc.

  19. Attitude of broiler breeders toward the production of antibiotics-free chickens (case study: Tehran province

    Directory of Open Access Journals (Sweden)

    A Behrouzi

    2016-01-01

    Full Text Available Abstract: This research aimed to investigate the attitude of broiler breeders toward the production of antibiotics-free chickens in Tehran province. The statistical population in this study included all broiler breeders (N=450 in Tehran province. Using stratified-random-sampling method 136 breeders were selected. The main tool for data gathering was a questionnaire contained 44 questions and items. Results showed that 52.9% of the respondents had “positive” or “relatively positive” viewpoints about the production of antibiotic-free chicken. The results also indicated that there were a significant (p < 0.05 positive relationship between the attitude of  production of antibiotic-free chicken with the education level, job satisfaction, second job as well as having technical supervisor. Moreover, a significant (p < 0.01 positive relationship was observed between the participation in training courses related to the production of antibiotic-free chicken and the viewpoint of studied broiler producers. On the other hand, no significant correlation was observed between the “viewpoint of chicken producers” and the variables such as: “age”, “job background”, “frequency of progeny”, “production/non-production of antibiotic-free chicken”, “consumption/non-consumption of antibiotic-free chicken” and “knowledge on breeding the antibiotic-free chicken”.

  20. High Performance Charge Breeder for HIE-ISOLDE and TSR@ISOLDE Applications

    CERN Document Server

    Shornikov, Andrey; Mertzig, Robert C.; Pikin, Alexander; Wenander, Fredrik J.C.

    2015-01-01

    We report on the development of the HEC2 (High Energy Compression and Current) charge breeder, a possible high performance successor to REXEBIS at ISOLDE. The new breeder would match the performance of the HIE-ISOLDE linac upgrade and make full use of the possible installation of a storage ring at ISOLDE (the TSR@ISOLDE initiative [1]). Dictated by ion beam acceptance and capacity requirements, the breeder features a 2-3.5 A electron beam. In many cases very high charge states, including bare ions up to Z=70 and Li/Na-like up to Z=92 could be requested for experiments in the storage ring, therefore, electron beam energies up to 150 keV are required. The electron-beam current density needed for producing ions with such high charge states at an injection rate into TSR of 0.5-1 Hz is between 10 and 20 kA/cm2, which agrees with the current density needed to produce A/q<4.5 ions for the HIE-ISOLDE linac with a maximum repetition rate of 100 Hz. The first operation of a prototype electron gun with a pulsed elect...

  1. Helium Leak Detection of Vessels in Fuel Transfer Cell (FTC) of Prototype Fast Breeder Reactor (PFBR)

    Science.gov (United States)

    Dutta, N. G.

    2012-11-01

    Bharatiya Nabhikiya Vidyut Nigam (BHAVINI) is engaged in construction of 500MW Prototype Fast Breeder Reactor (PFBR) at Kalpak am, Chennai. In this very important and prestigious national programme Special Product Division (SPD) of M/s Kay Bouvet Engg.pvt. ltd. (M/s KBEPL) Satara is contributing in a major way by supplying many important sub-assemblies like- Under Water trolley (UWT), Airlocks (PAL, EAL) Container and Storage Rack (CSR) Vessels in Fuel Transfer Cell (FTC) etc for PFBR. SPD of KBEPL caters to the requirements of Government departments like - Department of Atomic Energy (DAE), BARC, Defense, and Government undertakings like NPCIL, BHAVINI, BHEL etc. and other precision Heavy Engg. Industries. SPD is equipped with large size Horizontal Boring Machines, Vertical Boring Machines, Planno milling, Vertical Turret Lathe (VTL) & Radial drilling Machine, different types of welding machines etc. PFBR is 500 MWE sodium cooled pool type reactor in which energy is produced by fissions of mixed oxides of Uranium and Plutonium pellets by fast neutrons and it also breeds uranium by conversion of thorium, put along with fuel rod in the reactor. In the long run, the breeder reactor produces more fuel then it consumes. India has taken the lead to go ahead with Fast Breeder Reactor Programme to produce electricity primarily because India has large reserve of Thorium. To use Thorium as further fuel in future, thorium has to be converted in Uranium by PFBR Technology.

  2. Design of the low energy beam transport line between CARIBU and the EBIS charge breeder

    Energy Technology Data Exchange (ETDEWEB)

    Perry, A., E-mail: aperry4@hawk.iit.edu [Argonne National Laboratory, Argonne, IL 60439, USA and Illinois Institute of Technology, Chicago, IL 60616 (United States); Ostroumov, P. N.; Barcikowski, A.; Dickerson, C.; Kondrashev, S. A.; Mustapha, B.; Savard, G. [Argonne National Laboratory, Argonne, IL 60439 (United States)

    2015-01-09

    An Electron Beam Ion Source Charge Breeder (EBIS-CB) has been developed to breed radioactive beams from the CAlifornium Rare Isotope Breeder Upgrade (CARIBU) facility at ATLAS. The EBIS-CB will replace the existing ECR charge breeder to increase the intensity and improve the purity of reaccelerated radioactive ion beams. The EBIS-CB is in the final stage of off-line commissioning. Currently, we are developing a low energy beam transport (LEBT) system to transfer CARIBU beams to the EBIS-CB. As was originally planned, an RFQ cooler-buncher will precede the EBIS-CB. Recently, it was decided to include a multi-reflection time-of-flight (MR-TOF) mass-spectrometer following the RFQ. MR-TOF is a relatively new technology used to purify beams with a mass-resolving power up to 3×10{sup 5} as was demonstrated in experiments at CERN/ISOLDE. Very high purity singly-charged radioactive ion beams will be injected into the EBIS for charge breeding and due to its inherent properties, the EBIS-CB will maintain the purity of the charge bred beams. Possible contamination of residual gas ions will be greatly suppressed by achieving ultra-high vacuum in the EBIS trap. This paper will present and discuss the design of the LEBT and the overall integration of the EBIS-CB into ATLAS.

  3. Gas core reactors for actinide transmutation and breeder applications. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Clement, J.D.; Rust, J.H.

    1978-04-01

    This work consists of design power plant studies for four types of reactor systems: uranium plasma core breeder, uranium plasma core actinide transmuter, UF6 breeder and UF6 actinide transmuter. The plasma core systems can be coupled to MHD generators to obtain high efficiency electrical power generation. A 1074 MWt UF6 breeder reactor was designed with a breeding ratio of 1.002 to guard against diversion of fuel. Using molten salt technology and a superheated steam cycle, an efficiency of 39.2% was obtained for the plant and the U233 inventory in the core and heat exchangers was limited to 105 Kg. It was found that the UF6 reactor can produce high fluxes (10 to the 14th power n/sq cm-sec) necessary for efficient burnup of actinide. However, the buildup of fissile isotopes posed severe heat transfer problems. Therefore, the flux in the actinide region must be decreased with time. Consequently, only beginning-of-life conditions were considered for the power plant design. A 577 MWt UF6 actinide transmutation reactor power plant was designed to operate with 39.3% efficiency and 102 Kg of U233 in the core and heat exchanger for beginning-of-life conditions.

  4. 76 FR 2093 - Eni USA Gas Marketing LLC; Application for Blanket Authorization To Export Liquefied Natural Gas

    Science.gov (United States)

    2011-01-12

    ... Gas Marketing LLC; Application for Blanket Authorization To Export Liquefied Natural Gas AGENCY... November 30, 2010, by Eni USA Gas Marketing LLC (Eni USA), requesting blanket authorization to export..., Louisiana, to any country with the capacity to import LNG via ocean-going carrier and with which trade is...

  5. 78 FR 2990 - Bear Creek Storage Company, L.L.C.; Notice of Request Under Blanket Authorization

    Science.gov (United States)

    2013-01-15

    ... Energy Regulatory Commission Bear Creek Storage Company, L.L.C.; Notice of Request Under Blanket Authorization Take notice that on December 21, 2012, Bear Creek Storage Company, L.L.C. (Bear Creek), 569... the Natural Gas Act, and Bear Creek's blanket certificate issued in Docket No. CP10-28-000 on January...

  6. Impact of 6 different intestinal bacteria on broiler breeder sperm motility in vitro.

    Science.gov (United States)

    Haines, M D; Parker, H M; McDaniel, C D; Kiess, A S

    2013-08-01

    Male fertility is often evaluated by measuring sperm parameters, including concentration, viability, and motility. This is important because after copulation occurs, sperm must overcome many barriers in the female reproductive tract to fertilize the ovum. In mammalian species, sperm have been shown to have reduced motility when bacteria are present. In male broiler breeders, bacteria have been associated with spermatozoa, but their effect on motility has not been investigated. The sperm quality index is a modern rapid method of evaluating avian sperm motility. Therefore, the objective of this study was to use the sperm quality index to determine if broiler breeder sperm motility is reduced when semen is exposed to various bacteria. In this experiment, semen was collected from 20 broiler breeders to obtain a pooled neat semen sample. Six different intestinal bacteria, Salmonella enterica, Escherichia coli, Campylobacter jejuni, Clostridium bifermentans, Lactobacillus acidophilus, and Bifidobacterium animalis were cultured overnight. For each bacterium, 50 µL of semen was diluted in 450 µL of saline, sterile broth, or the overnight culture, creating 3 treatments. The experiment was repeated twice. In each treatment, 3 replicates were evaluated at 0 and 10 min postinoculation, creating a completely randomized design with a split plot over time. Also, the pH was measured for each treatment at 0 and 10 min. The results indicated that all broths containing bacteria immediately reduced broiler breeder sperm motility when compared with the controls (P < 0.0001), but broths containing Bifidobacterium or Lactobacillus virtually made sperm immotile. Although broth containing Salmonella, Campylobacter, and Bifidobacterium immediately reduced sperm motility, the reduction did not change over time. Broths containing E. coli, Clostridium, and Lactobacillus reduced sperm motility immediately, but over time motility continued to decrease. However, pH was increased when semen was

  7. Study of MHD Corrosion and Transport of Corrosion Products of Ferritic/Martensitic Steels in the Flowing PbLi and its Application to Fusion Blanket

    Science.gov (United States)

    Saeidi, Sheida

    Two important components of a liquid breeder blanket of a fusion power reactor are the liquid breeder/coolant and the steel structure that the liquid is enclosed in. One candidate combination for such components is Lead-Lithium (PbLi) eutectic alloy and advanced Reduced Activation Ferritic/Martensitic (RAFM) steel. The research performed here is aimed at: (1) better understanding of corrosion processes in the system including RAFM steel and flowing PbLi in the presence of a strong magnetic field and (2) prediction of corrosion losses in conditions of a Dual Coolant Lead Lithium (DCLL) blanket, which is at present the key liquid metal blanket concept in the US. To do this, numerical and analytical tools have been developed and then applied to the analysis of corrosion processes. First, efforts were taken to develop a computational suite called TRANSMAG (Transport phenomena in Magnetohydrodynamic Flows) as an analysis tool for corrosion processes in the PbLi/RAFM system, including transport of corrosion products in MHD laminar and turbulent flows. The computational approach in TRANSMAG is based on simultaneous solution of flow, energy and mass transfer equations with or without a magnetic field, assuming mass transfer controlled corrosion and uniform dissolution of iron in the flowing PbLi. Then, the new computational tool was used to solve an inverse mass transfer problem where the saturation concentration of iron in PbLi was reconstructed from the experimental data resulting in the following correlation: CS = e 13.604--12975/T, where T is the temperature of PbLi in K and CS is in wppm. The new correlation for saturation concentration was then used in the analysis of corrosion processes in laminar flows in a rectangular duct in the presence of a strong transverse magnetic field. As shown in this study, the mass loss increases with the magnetic field such that the corrosion rate in the presence of a magnetic field can be a few times higher compared to purely

  8. Causes of degradation and erosion of a blanket mire in the southern Pennines, UK

    NARCIS (Netherlands)

    Yeloff, D.; Hunt, C.O.; Labadz, J.C.

    2006-01-01

    This study investigates the causes of erosion and degradation of March Haigh, a blanket mire in the southern Pennines (UK), over a period of 160 years starting in 1840 AD. Peat samples taken from the site were dated using 210Pb; their humification and magnetic susceptibility were measured; and they

  9. 78 FR 35263 - Freeport LNG Development, L.P.; Application for Blanket Authorization To Export Previously...

    Science.gov (United States)

    2013-06-12

    ... the LNG at the time of export. The Application was filed under section 3 of the Natural Gas Act (NGA... not prohibited by U.S. law or policy. Current Application The current Application is filed in... Freeport LNG Development, L.P.; Application for Blanket Authorization To Export Previously Imported...

  10. 78 FR 53737 - ConocoPhillips Company; Application for Blanket Authorization To Export Previously Imported...

    Science.gov (United States)

    2013-08-30

    ...Phillips Company; Application for Blanket Authorization To Export Previously Imported Liquefied Natural Gas... which trade is not prohibited by U.S. law or policy. The Application was filed under section 3 of the...). In reviewing this Application, DOE will consider domestic need for the natural gas, as well as any...

  11. 76 FR 62048 - ConocoPhillips Company; Application for Blanket Authorization To Export Previously Imported...

    Science.gov (United States)

    2011-10-06

    ...Phillips Company; Application for Blanket Authorization To Export Previously Imported Liquefied Natural Gas... which trade is not prohibited by U.S. law or policy. The application was filed under section 3 of the... need for natural gas shall be the primary focus of DOE when evaluating an export application.\\4...

  12. 78 FR 4400 - Eni USA Gas Marketing LLC; Application for Blanket Authorization To Export Previously Imported...

    Science.gov (United States)

    2013-01-22

    ... carrier and with which trade is not prohibited by U.S. law or policy. Eni USA Gas Marketing is requesting... law or policy. Eni USA Gas Marketing states that it does not seek authorization to export domestically... USA Gas Marketing LLC; Application for Blanket Authorization To Export Previously Imported Liquefied...

  13. 75 FR 19954 - Cheniere Marketing, LLC; Application for Blanket Authorization To Export Liquefied Natural Gas

    Science.gov (United States)

    2010-04-16

    ... trade is not prohibited by U.S. law or policy, over a two year period commencing on the date of the... vessel and with which trade is not prohibited by U.S. law or policy, should market conditions in the... Cheniere Marketing, LLC; Application for Blanket Authorization To Export Liquefied Natural Gas AGENCY...

  14. 78 FR 9679 - National Fuel Gas Supply Corporation; Prior Notice of Activity Under Blanket Certificate

    Science.gov (United States)

    2013-02-11

    ... Energy Regulatory Commission National Fuel Gas Supply Corporation; Prior Notice of Activity Under Blanket Certificate On January 24, 2013, National Fuel Gas Supply Corporation (National Fuel) filed with the Federal... Boone Mountain Storage Field located in Elk County, Pennsylvania. National Fuel seeks authority to plug...

  15. 78 FR 13657 - Southwest Gas Storage Company; Prior Notice of Activity Under Blanket Certificate

    Science.gov (United States)

    2013-02-28

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Southwest Gas Storage Company; Prior Notice of Activity Under Blanket Certificate On February 8, 2013, Southwest Gas Storage Company (Southwest) filed a prior notice request...

  16. 75 FR 2140 - Florida Gas Transmission Company, LLC; Notice of Staff Protest to Proposed Blanket Certificate...

    Science.gov (United States)

    2010-01-14

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Florida Gas Transmission Company, LLC; Notice of Staff Protest to Proposed Blanket Certificate Activity January 7, 2010. Commission staff (Protestor) hereby protests the prior...

  17. The effect of downstream perforated blanket on the safety against piping in heading-up structures

    Directory of Open Access Journals (Sweden)

    Mona A. Hagras

    2014-03-01

    It was found that piping index (Pe is governed by perforation ration (PR, relative hole diameter (D/Lb, ratio of length of the blanket to length of the apron (Lb/La, head difference between upstream and downstream structure and the depth of downstream cutoff.

  18. Conceptual design of the blanket mechanical attachment for the helium-cooled lithium-lead reactor

    Energy Technology Data Exchange (ETDEWEB)

    Barrera, G. [EURATOM-CIEMAT Association for Fusion, Avda. Complutense 22, 28040 Madrid (Spain); Branas, B. [EURATOM-CIEMAT Association for Fusion, Avda. Complutense 22, 28040 Madrid (Spain)], E-mail: beatriz.branas@ciemat.es; Lucas, J. [Elytt Energy, Po Castellana 114, 3, 7 28046 Madrid (Spain); Doncel, J.; Medrano, M.; Garcia, A. [EURATOM-CIEMAT Association for Fusion, Avda. Complutense 22, 28040 Madrid (Spain); Giancarli, L. [CEA/Saclay, DEN/CPT, 91191 Gif-sur-Yvette (France); Ibarra, A. [EURATOM-CIEMAT Association for Fusion, Avda. Complutense 22, 28040 Madrid (Spain); Li Puma, A. [CEA/Saclay, DEN/CPT, 91191 Gif-sur-Yvette (France); Maisonnier, D.; Sardain, P. [EFDA-Close Support Unit Garching, Boltzmannstrasse 2, D-85748 Garching (Germany)

    2008-01-15

    The conceptual design of a new type of fusion reactor based on the helium-cooled lithium-lead (HCLL) blanket has been performed within the European Power Plant Conceptual Studies. As part of this activity, a new attachment system suitable for the HCLL blanket modules had to be developed. This attachment is composed of two parts. The first one is the connection between module and the first part of a shield, called high temperature shield, which operates at a temperature around 500 deg. C, close to that of the blanket module. This connection must be made at the lateral walls, in order to avoid openings through the first wall and breeding zone thus avoiding complex design and fabrication issues of the module. The second connection is the one between the high temperature shield and a second shield called low temperature shield, which has a temperature during reactor operation around 150 deg. C. The design of this connection is complex because it must allow the large differential thermal expansion (up to 30 mm) between the two components. Design proposals for both connections are presented, together with the results of finite element mechanical analyses which demonstrate the feasibility to support the blanket and shield modules during normal and accidental operation conditions.

  19. Salted lamb meat blanket of Petrolina-Pernambuco, Brazil: process and quality

    Directory of Open Access Journals (Sweden)

    Nely de Almeida Pedrosa

    2014-03-01

    Full Text Available Salted lamb meat blanket, originated from boning, salting, and drying of whole lamb carcass, was studied aiming at obtaining information that support the search for guarantees of origin for this typical regional product from the city of Petrolina-Pernambuco-Brazil. Data from three processing units were obtained, where it was observed the use of a traditional local technology that uses salting, an ancient preservation method; however, with a peculiar boning technique, resulting in a meat product with great potential for exploitation in the form of meat blanket. Based on the values of pH (6.22 ± 0.22, water activity (0.97 ± 0.02, and moisture (69.86 ± 2.26 lamb meat blanket is considered a perishable product, and consequently it requires the use of other preservation methods combined with salt, which along with the results of the microbiological analyses (absence of Salmonella sp, score <10 MPN/g of halophilic bacteria, total coliforms between 6.7 × 10³ and 5.2 × 10(6 FUC/g, and Staphylococcus from 8.1 × 10³ CFU/g at uncountable reinforce the need of hygienic practices to ensure product safety. These results, together with the product notoriety and the organization of the sector are important factors in achieving Geographical Indication of the Salted lamb Meat blanket of Petrolina.

  20. Stochastic modeling to determine the economic effects of blanket, selective, and no dry cow therapy

    NARCIS (Netherlands)

    Huijps, K.; Hogeveen, H.

    2007-01-01

    In many countries, blanket dry cow therapy (DCT) is the standard way to dry off cows. Because of concerns about antibiotic resistance, selective DCT is proposed as an alternative. The economic consequences of different types of DCT were studied previously, but variation between input traits and

  1. 76 FR 18216 - Southern Natural Gas Company; Notice of Request Under Blanket Authorization

    Science.gov (United States)

    2011-04-01

    ... Federal Energy Regulatory Commission Southern Natural Gas Company; Notice of Request Under Blanket Authorization Take notice that on March 16, 2011, Southern Natural Gas Company (Southern), Post Office Box 2563... and 157.216 of the Commission's Regulations under the Natural Gas Act (NGA) as amended, to abandon in...

  2. 75 FR 13535 - Northern Natural Gas Company; Notice of Request Under Blanket Authorization

    Science.gov (United States)

    2010-03-22

    ... Energy Regulatory Commission Northern Natural Gas Company; Notice of Request Under Blanket Authorization March 16, 2010. Take notice that on March 12, 2010, Northern Natural Gas Company (Northern), 1111 South... External Affairs, Northern Natural Gas Company, 1111 South 103rd Street, Omaha, Nebraska 68124, at (402...

  3. 75 FR 3232 - Northern Natural Gas Company; Notice of Request Under Blanket Authorization

    Science.gov (United States)

    2010-01-20

    ... Energy Regulatory Commission Northern Natural Gas Company; Notice of Request Under Blanket Authorization January 8, 2010. Take notice that on December 30, 2009, Northern Natural Gas Company (Northern), 1111... sections 157.205 and 157.214 of the Commission's regulations under the Natural Gas Act for authorization to...

  4. Integral neutronics experiments in analytical mockups for blanket of a hybrid reactor

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Rong, E-mail: liurongzy@163.com; Zhu, Tonghua; Lu, Xinxin; Wang, Xinhua; Yan, Xiaosong; Feng, Song; Yang, Yiwei; Wang, Mei; Jiang, Li

    2014-12-15

    Highlights: • For checking property of the hybrid blanket by integral experiments, three mockups are established. • In spherical mockup with depleted uranium and cubic mockup with natural uranium, the plutonium production rates and uranium fission rates are measured. • In spherical mockup with depleted uranium and LiPb, tritium production rates are measured. • The measured results are compared to the calculated ones with MCNP-4B code and ENDF/B-VI library data. - Abstract: The paper describes recent progress in integral neutronics experiments in the analytical mockups for the blanket in a fusion-fission hybrid energy reactor. A conceptual blanket of the hybrid reactor is mainly loaded with natural uranium and lithium material. In the fission fuel region, uranium material and light water are arranged alternately. The mockups of the conceptual blanket are designed and used for checking neutron property of the blanket by integral experiments. Based on materials available, the spherical fission mockup for fission research and plutonium production consists of three layers of depleted uranium shells and several layers of polyethylene and graphite shells. The spherical lithium mockup for tritium production consists of depleted uranium and LiPb alloy shells. The cubic mockup consists of natural uranium and polyethylene and its structure is basically consistent with one of the fuel region. In the mockups with the D-T neutron source, the plutonium production rates, uranium fission rates and tritium production rates are measured, separately. The measured results are compared to the calculated ones with MCNP-4B code and ENDF/B-VI library data.

  5. EU contribution to the procurement of the ITER blanket first wall

    Energy Technology Data Exchange (ETDEWEB)

    Lorenzetto, Patrick, E-mail: Patrick.Lorenzetto@f4e.europa.eu [Fusion for Energy, Torres Diagonal Litoral B3, Carrer Josep Plà 2, B-08019 Barcelona (Spain); Banetta, Stefano; Bellin, Boris [Fusion for Energy, Torres Diagonal Litoral B3, Carrer Josep Plà 2, B-08019 Barcelona (Spain); Boireau, Bruno [AREVA NP, Centre Technique, 71200 Le Creusot (France); Bucci, Philippe [Atmostat, rue René Hamon 31, 94815 Villejuif Cedex (France); Cicero, Tindaro [Fusion for Energy, Torres Diagonal Litoral B3, Carrer Josep Plà 2, B-08019 Barcelona (Spain); Conchon, Denis [Atmostat, rue René Hamon 31, 94815 Villejuif Cedex (France); Dellopoulos, Georges [Fusion for Energy, Torres Diagonal Litoral B3, Carrer Josep Plà 2, B-08019 Barcelona (Spain); Hardaker, Stephen [Amec Foster Wheeler plc, Booths Park, Chelford Road, Knutsford WA16 8QZ (United Kingdom); Marshall, Paul [Fusion for Energy, Torres Diagonal Litoral B3, Carrer Josep Plà 2, B-08019 Barcelona (Spain); Nogué, Patrice [AREVA NP, Centre Technique, 71200 Le Creusot (France); Pérez, Marcos [Leading Enterprises SL, Pasaje de La Agüera, 39409 San Felices de Buelna (Spain); Gutierrez, Leticia Ruiz [Iberdrola Ingeniería y Construcción S.A.U., Avenida Manoteras 20, 28050 Madrid (Spain); Samaniego, Fernando [Leading Enterprises SL, Pasaje de La Agüera, 39409 San Felices de Buelna (Spain); Sherlock, Paul [Amec Foster Wheeler plc, Booths Park, Chelford Road, Knutsford WA16 8QZ (United Kingdom); Zacchia, Francesco [Fusion for Energy, Torres Diagonal Litoral B3, Carrer Josep Plà 2, B-08019 Barcelona (Spain)

    2016-11-01

    Highlights: • Presentation of the blanket first wall design concept to be procured by Europe. • Presentation of the main outcome of the R&D programme with the resulting FW fabrication route. • Presentation of the ITER first wall pre-qualification programme with the results achieved so far. • Presentation of the on-going irradiation experiments. • Presentation of the EU procurement strategy. - Abstract: Fusion for Energy (F4E), the European Union’s Domestic Agency for ITER, is responsible for the procurement of about 50% of the ITER blanket first wall (FW), called normal heat flux FW. A procurement strategy has been implemented by the In-Vessel Project Team at F4E aimed at mitigating technical and commercial risks for the procurement of ITER blanket FW panels, promoting as far as possible competition among industrial partners. This procurement strategy has been supported by an extensive Research and Development (R&D) programme, implemented over more than 15 years in Europe, to develop various fabrication technologies. It includes in particular the manufacture and testing of small-scale, medium-scale mock-ups and full-scale prototypes of blanket FW panels. In this R&D programme, significant efforts have been devoted to the development of a reliable materials joining technique. Hot Isostatic Pressing was selected for the manufacture of the FW panels made from beryllium, copper–chromium–zirconium alloy and 316L(N)-IG austenitic stainless steel. This paper presents the main outcome of the on-going R&D programme, the latest results of the FW qualification programme together with the procurement strategy implemented by F4E for the supply of the European contribution to the procurement of the ITER blanket FW.

  6. The effect of arginine dietary supplementation in broiler breeder hens on offspring humoral and cell-mediated immune responses

    Directory of Open Access Journals (Sweden)

    AE Murakami

    2014-06-01

    Full Text Available The influence of supplementing the diet of broiler breeder hens with arginine (Arg on their offspring's humoral and cell-mediated immune response was evaluated in two experiments. In experiments I and II, breeder hens were fed diets containing graded levels of Arg (0.943, 1.093, 1.243, 1.393 and 1.543% digestible Arg. In experiment I, the offspring was randomly grouped according to the treatment received by the breeder hens, with five levels of Arg in the maternal diet and six replicates, giving a total 30 experimental units. In experiment II, the offspring were grouped in accordance with the treatment received by the breeder hens; however, Arg was added to the starter diet (1.300, 1.450, 1.600, 1.750 and 1.900% digestible Arg and also the growing diet (1.150, 1.300, 1.450, 1.600 and 1.750% digestible Arg. Supplementation of the broiler breeder hen diet did not influence (p > 0.05 the development of the lymphoid organs (cloacal bursa, thymus and spleen of the offspring, whether their diet were supplemented or not. Nevertheless, greater weight and dimensions cloacal bursa were found in the supplemented offspring in comparison with the nonsupplemented offspring. Macrophage phagocytic activity was found to be unaffected (p > 0.05, independently of the Arg supplementation. The offspring fed with supplemented diets showed a linear reduction in the antibody titer against Newcastle Disease (p 0.05 by the breeder hen diet. This study concluded that supplementing the breeder hen diet with arginine is insufficient to improve the humoral and cellular immune response, requiring supplementation of the offspring diet.

  7. Comparison of forced-air warming systems with upper body blankets using a copper manikin of the human body.

    Science.gov (United States)

    Bräuer, A; English, M J M; Steinmetz, N; Lorenz, N; Perl, T; Braun, U; Weyland, W

    2002-09-01

    Forced-air warming with upper body blankets has gained high acceptance as a measure for the prevention of intraoperative hypothermia. However, data on heat transfer with upper body blankets are not yet available. This study was conducted to determine the heat transfer efficacy of eight complete upper body warming systems and to gain more insight into the principles of forced-air warming. Heat transfer of forced-air warmers can be described as follows: Qdot;=h. DeltaT. A, where Qdot;= heat flux [W], h=heat exchange coefficient [W m-2 degrees C-1], DeltaT=temperature gradient between the blanket and surface [ degrees C], and A=covered area [m2]. We tested eight different forced-air warming systems: (1) Bair Hugger and upper body blanket (Augustine Medical Inc. Eden Prairie, MN); (2) Thermacare and upper body blanket (Gaymar Industries, Orchard Park, NY); (3) Thermacare (Gaymar Industries) with reusable Optisan upper body blanket (Willy Rüsch AG, Kernen, Germany); (4) WarmAir and upper body blanket (Cincinnati Sub-Zero Products, Cincinnati, OH); (5) Warm-Gard and single use upper body blanket (Luis Gibeck AB, Upplands Väsby, Sweden); (6) Warm-Gard and reusable upper body blanket (Luis Gibeck AB); (7) WarmTouch and CareDrape upper body blanket (Mallinckrodt Medical Inc., St. Luis, MO); and (8) WarmTouch and reusable MultiCover trade mark upper body blanket (Mallinckrodt Medical Inc.) on a previously validated copper manikin of the human body. Heat flux and surface temperature were measured with 11 calibrated heat flux transducers. Blanket temperature was measured using 11 thermocouples. The temperature gradient between the blanket and surface (DeltaT) was varied between -8 and +8 degrees C, and h was determined by linear regression analysis as the slope of DeltaT vs. heat flux. Mean DeltaT was determined for surface temperatures between 36 and 38 degrees C, as similar mean skin surface temperatures have been found in volunteers. The covered area was estimated to be 0

  8. Lead cooled heterogeneous accelerator driven molten-fluoride blanket for incineration of long-lived radioactive wastes

    Energy Technology Data Exchange (ETDEWEB)

    Lopatkin, A.V.; Matyushechkin, V.M.; Tretyakov, I.T. [Research and Development Inst. of Power Engineering, Moscow (Russian Federation); Blagovolin, P.P.; Kazaritsky, V.D. [State Scientific Centre, Moscow (Russian Federation). Inst. of Theoretical and Experimental Physics; Kostenkov, V.I.; Chuvilin, D.Yu. [I.V. Kurchatov Inst., Moscow (Russian Federation)

    1997-09-01

    This paper presents a tentative design description and evaluation of the basic parameters of a lead cooled heterogeneous accelerator driven molten fluoride blanket. The proton beam of a 1 GeV accelerator strikes the blanket from below and generates spallation neutrons in the flow of lead, which serves as a target. These neutrons leave the target zone and get into a heterogeneous blanket with separated volumes of molten salts and lead. Fissile materials are dissolved in the salt. On getting into the molten salt volume the neutrons cause fission (transmutation) of the actinides, the produced heat being removed by circulation of molten lead. Two versions of the blanket design are examined. The first version: molten salt circulates in the fuel channels, while lead cools the channels flowing through the interchannel space (the salt channel design). The second version: it is lead that circulates in the channels, while molten salt takes up the interchannel space (the lead channel design). A preliminary blanket design study showed that both blanket designs possess a potential for improving performance. At present time the blanket design, mentioned above as the salt channel design, seems to be more promising. 1 ref., 2 figs., 2 tabs.

  9. Dietary influence of digestible lysine concentration on Cobb 500 hen broiler breeder reproductive performance.

    Science.gov (United States)

    Mejia, L; McDaniel, C D; Corzo, A

    2012-02-01

    A study was conducted to examine the reproductive parameters of Cobb 500 broiler breeder hens fed 2 different types of diets varying in digestible lysine concentration. In total, 240 Cobb 500 broiler breeder pullets were placed in individual cages and given experimental diets from 35 to 45 wk of age. Treatments 1 and 2 were diets formulated using only commercially available feed ingredients and consisted of digestible lysine intakes of 1,200 (IDL) and 1,010 mg/hen per day (ID). Treatments 3 and 4 consisted of semipurified diets with the inclusion of l-glutamic acid to maintain isonitrogenous conditions with digestible lysine intakes of 1,010 (SPL) and 600 mg/hen per day (SP). Hens fed the SPL and SP diets had lower hen-day egg production than hens fed the ID diet, with hens receiving the IDL diet yielding intermediate values. Hens fed the SP diet had the lowest (P < 0.05) egg weight, but no differences were observed among dietary treatments for egg specific gravity. Fertility and hatchability of eggs set were lowest (P < 0.05) for hens fed the SPL dietary treatment. No differences were observed for early and middle embryonic mortality, contaminated, or pipped eggs. Late embryonic mortality was observed to be higher (P < 0.05) in hens fed the SP diet. A decrease in the daily intake of digestible lysine appeared to improve broiler breeder reproductive performance when hens were fed a semipurified diet. In contrast, the same effect was not observed when hens were fed a standard industry-type diet that contained less lysine.

  10. Identification of novel candidate genes for follicle selection in the broiler breeder ovary

    Science.gov (United States)

    2012-01-01

    Background Broiler breeders fed ad libitum are characterised by multiple ovulation, which leads to poor shell quality and egg production. Multiple ovulation is controlled by food restriction in commercial flocks. However, the level of food restriction raises welfare concerns, including that of severe hunger. Reducing the rate of multiple ovulation by genetic selection would facilitate progress towards developing a growth profile for optimum animal welfare. Results The study utilised 3 models of ovarian follicle development; laying hens fed ad libitum (experiment 2) and broiler breeders fed ad libitum or a restricted diet (experiments 1 & 3). This allowed us to investigate gene candidates for follicular development by comparing normal, abnormal and “controlled” follicle hierarchies at different stages of development. Several candidate genes for multiple ovulation were identified by combining microarray analysis of restricted vs. ad libitum feeding, literature searches and QPCR expression profiling throughout follicle development. Three candidate genes were confirmed by QPCR as showing significant differential expression between restricted and ad libitum feeding: FSHR, GDF9 and PDGFRL. PDGFRL, a candidate for steroidogenesis, showed significantly up-regulated expression in 6–8 mm follicles of ad libitum fed broiler breeders (P = 0.016), the period at which follicle recruitment occurs. Conclusions Gene candidates have been identified and evidence provided to support a possible role in regulation of ovarian function and follicle number. Further characterisation of these genes will be required to assess their potential for inclusion into breeding programmes to improve the regulation of follicle selection and reduce the need for feed restriction. PMID:22992265

  11. Investigation of ion capture in an electron beam ion trap charge-breeder for rare isotopes

    Science.gov (United States)

    Kittimanapun, Kritsada

    Charge breeding of rare isotope ions has become an important ingredient for providing reaccelerated rare isotope beams for science. At the National Superconducting Cyclotron Laboratory (NSCL), a reaccelerator, ReA, has been built that employs an advanced Electron Beam Ion Trap (EBIT) as a charge breeder. ReA will provide rare-isotope beams with energies of a few hundred keV/u up to tens of MeV/u to enable the study of properties of rare isotopes via low energy Coulomb excitation and transfer reactions, and to investigate nuclear reactions important for nuclear astrophysics. ReA consists of an EBIT charge breeder, a charge-over-mass selector, a room temperature radio-frequency quadrupole accelerator, and a superconducting radio-frequency linear accelerator. The EBIT charge breeder features a high-current electron gun, a long trap structure, and a hybrid superconducting magnet to reach both high acceptance for injected low-charge ions as well as high-electron beam current densities for fast charge breeding. In this work, continuous ion injection and capture in the EBIT have been investigated with a dedicated Monte-Carlo simulation code and in experimental studies. The Monte-Carlo code NEBIT considers the electron-impact ionization cross sections, space charge due to the electron beam current, ion dynamics, electric field from electrodes, and magnetic field from the superconducting magnet. Experiments were performed to study the capture efficiency as a function of injected ion beam current, electron beam current, trap size, and trap potential depth. The charge state evolution of trapped ions was studied, providing information about the effective current density of the electron beam inside the EBIT. An attempt was made to measure the effective space-charge potential of the electron beam by studying the dynamics of a beam injected and reflected inside the trap.

  12. Methods of fertility control in cats: Owner, breeder and veterinarian behavior and attitudes.

    Science.gov (United States)

    Murray, Jane K; Mosteller, Jill R; Loberg, Jenny M; Andersson, Maria; Benka, Valerie A W

    2015-09-01

    Fertility control is important for population management of owned and unowned cats, provides health benefits at the individual level and can reduce unwanted sexually dimorphic behaviors such as roaming, aggression, spraying and calling. This article reviews the available evidence regarding European and American veterinarian, owner and pedigree cat breeder attitudes toward both surgical sterilization and non-surgical fertility control. It additionally presents new data on veterinarians' and pedigree cat breeders' use of, and attitudes toward, alternative modalities of fertility control. Within the United States and Europe, the proportion of cats reported to be sterilized varies widely. Published estimates range from 27-93% for owned cats and 2-5% for cats trapped as part of a trap-neuter-return (TNR) program. In some regions and populations of cats, non-surgical fertility control is also used. Social context, cultural norms, individual preferences, economic considerations, legislation and professional organizations may all influence fertility control decisions for cats. Particularly in Europe, a limited number of non-surgical temporary contraceptives are available for cats; these include products with regulatory approval for cats as well as some used 'off label'. Non-surgical methods remove the risk of complications related to surgery and offer potential to treat more animals in less time and at lower cost; they may also appeal to pedigree cat breeders seeking temporary contraception. However, concerns over efficacy, delivery methods, target species safety, duration and side effects exist with current non-surgical options. Research is under way to develop new methods to control fertility in cats without surgery. US and European veterinarians place high value on three perceived benefits of surgical sterilization: permanence, behavioral benefits and health benefits. Non-surgical options will likely need to share these benefits to be widely accepted by the veterinary

  13. High performance charge breeder for HIE-ISOLDE and TSR@ISOLDE applications

    Energy Technology Data Exchange (ETDEWEB)

    Shornikov, Andrey, E-mail: andrey.shornikov@cern.ch; Mertzig, Robert C.; Wenander, Fredrik J. C. [CERN, Geneva 23, CH-1211 (Switzerland); Beebe, Edward N.; Pikin, Alexander [Brookhaven National Lab, Upton, NY 11973 (United States)

    2015-01-09

    We report on the development of the HEC{sup 2} (High Energy Compression and Current) charge breeder, a possible high performance successor to REXEBIS at ISOLDE. The new breeder would match the performance of the HIE-ISOLDE linac upgrade and make full use of the possible installation of a storage ring at ISOLDE (the TSR@ISOLDE initiative [1]). Dictated by ion beam acceptance and capacity requirements, the breeder features a 2–3.5 A electron beam. In many cases very high charge states, including bare ions up to Z=70 and Li/Na-like up to Z=92 could be requested for experiments in the storage ring, therefore, electron beam energies up to 150 keV are required. The electron-beam current density needed for producing ions with such high charge states at an injection rate into TSR of 0.5–1 Hz is between 10 and 20 kA/cm{sup 2}, which agrees with the current density needed to produce A/q<4.5 ions for the HIE-ISOLDE linac with a maximum repetition rate of 100 Hz. The first operation of a prototype electron gun with a pulsed electron beam of 1.5 A and 30 keV was demonstrated in a joint experiment with BNL [2]. In addition, we report on further development aiming to achieve CW operation of an electron beam having a geometrical transverse ion-acceptance matching the injection of 1{sup +} ions (11.5 μm), and an emittance/energy spread of the extracted ion beam matching the downstream mass separator and RFQ (0.08 μm normalized / ± 1%)

  14. Effects of dietary L-arginine on laying performance and antioxidant capacity of broiler breeder hens, eggs, and offspring during the late laying period.

    Science.gov (United States)

    Duan, Xiaoxue; Li, Feng; Mou, Shaoyang; Feng, Jiawei; Liu, Peifeng; Xu, Liangmei

    2015-12-01

    The effects of maternal L-arginine supplementation on laying performance and the antioxidant capacity of broiler breeder hens, egg yolk, and their one-day-old offspring were investigated. In a 9 wk experiment, 210 60-week-old Arbor Acres healthy female broiler breeders were randomly divided into 5 treatments with 6 replicates of 7 females and fed a corn and soybean meal diet with 5 arginine levels (0.96%, 1.16%, 1.36%, 1.56%, and 1.76% digestible arginine). Laying performance and anti-oxidant capacity of broiler breeder hens, eggs, and offspring were evaluated. Digestible arginine level in the broiler breeder diet had a significant effect on the laying rate (linear and quadratic effect, Pbroiler breeder diet on the total antioxidant capacity (T-AOC) levels and methane dicarboxylic aldehyde (MDA) concentration in the broiler breeder serum, egg yolk and serum, and liver and breast of one-day-old offspring (linear and quadratic effect, Pbroiler breeder serum was observed. There were significant effects of digestible arginine level in the broiler breeder diet on the GSH-PX activity of the egg yolk (linear effect, Pbroiler breeder during the late laying period.

  15. Proposal for the award of a blanket purchase contract for the supply of foundry services for semiconductor technologies

    CERN Document Server

    2006-01-01

    This document concerns the award of a blanket purchase contract for the supply of foundry services for semiconductor technologies. The Finance Committee is invited to agree to the negotiation of a blanket purchase contract with IBM SWITZERLAND (CH), the lowest bidder complying with the specification, for the supply of foundry services for semiconductor technologies for a period of four years, for a total amount not exceeding 4 000 000 US dollars, not subject to revision. At the present rate of exchange, the total amount of the blanket purchase contract is equivalent to approximately 5 000 000 Swiss francs. CERN's financial contribution will not exceed 1 000 000 Swiss francs.

  16. The manufacture of enriched uranium fuel slugs for the Experimental Breeder Reactor.

    Energy Technology Data Exchange (ETDEWEB)

    Shuck, Author B.

    1953-04-20

    This report describes the specifications, materials and the sequence of operations used to found and fabricate 4 the first charge of enriched uranium fuel in the Experimental Breeder Reactor. The work was governed by the following principles: a. That the fuel be of correct composition, dimension and metallurgical condition for use in the reactor. b. That a maximum yield of finished fuel slugs from the quantity of uranium available for the program be achieved. c. That the residues be in a form which can be recovered by chemical or other means. d. That a detailed record be kept in such form that a complete history of each fuel slug be available.

  17. Effect of dietary vitamin A on reproductive performance and immune response of broiler breeders.

    Directory of Open Access Journals (Sweden)

    Jianmin Yuan

    Full Text Available The effects of dietary vitamin A supplementation on reproductive performance, liver function, fat-soluble vitamin retention, and immune response were studied in laying broiler breeders. In the first phase of the experiment, 1,120 Ross-308 broiler breeder hens were fed a diet of corn and soybean meal supplemented with 5,000 to 35,000 IU/kg vitamin A (retinyl acetate for 20 weeks. In the second phase, 384 Ross-308 broiler breeder hens were fed the same diet supplemented with 5,000 to 135,000 IU/kg vitamin A (retinyl acetate for 24 weeks. The hens' reproductive performance, the concentrations of vitamins A and E in liver and egg yolk, liver function, mRNA expression of vitamin D receptor in duodenal mucosa, antibody titers against Newcastle disease virus vaccine, and T-cell proliferation responses were evaluated. Supplementation of vitamin A at levels up to and including 35,000 IU/kg did not affect reproductive performance and quadratically affected antibody titer to Newcastle disease virus vaccine (p<0.05. Dietary addition of vitamin A linearly increased vitamin A concentration in liver and yolk and linearly decreased α-, γ-, and total tocopherol concentration in yolk (p<0.01 and α-tocopherol in liver (p<0.05. Supplementation of vitamin A at doses of 45,000 IU/kg and above significantly decreased egg weight, yolk color, eggshell thickness and strength, and reproductive performance. Dietary vitamin A significantly increased mRNA expression of vitamin D receptor in duodenal mucosa (p<0.05, increased aspartate amino transferase activity, and decreased total bilirubin concentration in serum. Supplementation of vitamin A at 135,000 IU/kg decreased the proliferation of peripheral blood lymphocytes (p<0.05. Therefore, the maximum tolerable dose of vitamin A for broiler breeders appears to be 35,000 IU/kg, as excessive supplementation has been shown to impair liver function, reproductive performance, and immune response.

  18. Large scale breeder reactor plant prototype mechanical pump conceptual design study

    Energy Technology Data Exchange (ETDEWEB)

    1976-07-01

    This final report is a complete conceptual design study of a mechanical pump for a large scale breeder reactor plant. The pumps are located in the cold leg side of the loops. This makes the net positive suction head available - NPSHA - low, and is, in fact, a major influencing factor in the design. Where possible, experience gained from the Clinch River Project and the FFTF is used in this study. Experience gained in the design, manufacturer, and testing of pumps in general and sodium pumps in particular is reflected in this report. The report includes estimated cost and time schedule for design, manufacture, and testing. It also includes a recommendation for development needs.

  19. SEROLOGICAL EVIDENCE OF ANTIBODIES AGAINST LARYNGOTRACHEITIS VIRUS IN BROILERS AND LAYER BREEDERS

    OpenAIRE

    Yauris S., Gabriela; Laboratorio de Patología Aviar,Facultad de Medicina Veterinaria, Universidad Nacional Mayor de San Marcos, Lima; Icochea D’A., Eliana; Laboratorio de Patología Aviar,Facultad de Medicina Veterinaria, Universidad Nacional Mayor de San Marcos, Lima; González V., Rosa; Laboratorio de Patología Aviar,Facultad de Medicina Veterinaria, Universidad Nacional Mayor de San Marcos, Lima; Falcón P., Néstor; Laboratorio de Medicina Veterinaria Preventiva,Facultad de Veterinaria y Zootecnia, Universidad Peruana Cayetano Heredia, Lima

    2012-01-01

    A total of 360 serum samples from eighteen flocks of broiler and layer breeders in phase of production were used in order to detect the presence of Laryngotracheitis virus (VLT) antibodies using a commercial ELISA test. The poultry farms were located in the region of Lima and in the northern coast of Peru. Samples were collected from July 2004 till September 2005 and were processed as a group. Eight samples out of 360 in 6 flocks were positive to antibodies against VLT. Due to the small numbe...

  20. Effects of Mothers’ Attitude as Breeders and Distance of Stockyard toward Diarrhea Incidence among Toddlers

    OpenAIRE

    Yarmaliza - Yarmaliza; Sugito Sugito; Teuku Reza Ferasyi; Nurliana Nurliana; Razali Razali

    2016-01-01

    Diarrhea is a disease with change of feces form and concentration in which feces is mushy to liquid, and the increase of poop frequency more than usual (three times or more in a day). In Aceh Province, there were diarrhea cases as many as 48/1,000 live births. In West Aceh District, there were 1,071 cases in 2014, meanwhile there were 70 cases among toddlers in Meureubo Subdistrict. This study aimed to determine relation between mothers’attitude as breeders and distance of stockyard toward...

  1. Effects of Zinc Glycinate on Productive and Reproductive Performance, Zinc Concentration and Antioxidant Status in Broiler Breeders.

    Science.gov (United States)

    Zhang, Ling; Wang, Yong-Xia; Xiao, Xue; Wang, Jiang-Shui; Wang, Qian; Li, Kai-Xuan; Guo, Tian-Yu; Zhan, Xiu-An

    2017-08-01

    An experiment was conducted to investigate the effects of zinc glycinate (Zn-Gly) supplementation as an alternative for zinc sulphate (ZnSO4) on productive and reproductive performance, zinc (Zn) concentration and antioxidant status in broiler breeders. Six hundred 39-week-old Lingnan Yellow broiler breeders were randomly assigned to 6 groups consisting of 4 replicates with 25 birds each. Breeders were fed a basal diet (control group, 24 mg Zn/kg diet), basal diet supplemented with 80 mg Zn/kg diet from ZnSO4 or basal diet supplemented with 20, 40, 60 and 80 mg Zn/kg diet from Zn-Gly. The experiment lasted for 8 weeks after a 4-week pre-test with the basal diet, respectively. Results showed that Zn supplementation, regardless of sources, improved (P broiler breeders, and the 80 mg Zn/kg from Zn-Gly was the optimum choice for broiler breeders compared with other levels of Zn from Zn-Gly and 80 mg/kg Zn from ZnSO4.

  2. Vitamin E and selenium in broiler breeder diets: Effect on live performance, hatching process, and chick quality.

    Science.gov (United States)

    Urso, U R A; Dahlke, F; Maiorka, A; Bueno, I J M; Schneider, A F; Surek, D; Rocha, C

    2015-05-01

    This study evaluated the effect of different dietary vitamin E levels and different selenium sources on the productive and reproductive performance of broiler breeders. In total 640 females and 64 males between 22 and 52 weeks old were studied. A completely randomized experimental design in factorial arrangement, with 4 treatments of 8 replicates with 20 females and 2 males each, was applied. Treatments consisted of 2 vitamin E levels (30 and 120 mg/kg) and two selenium sources (sodium selenite and zinc-L-selenomethionine). Egg production (rate of lay and eggs per breeder), egg characteristics (egg, yolk, eggshell, and albumen weights), fertility, incubation responses (egg weight loss during incubation, hatchability, and hatching window), and hatchling characteristics (weight and yield) were evaluated. There was no influence of dietary vitamin E levels or selenium sources on egg production (P > 0.05). Mature breeders (47 weeks old) fed zinc-L-selenomethionine and 120 mg vitamin E/kg feed produced heavier eggs and albumen. Hatchability of the eggs of breeders fed 120 mg vitamin E/kg feed was higher than breeders fed 30 mg vitamin at 29 wks. The dietary inclusion of organic selenium also promoted heavier hatchling weight until egg production peak (33 wk), but did not influence hatchling quality or hatching window. It was concluded that the dietary supplementation of zinc-L-selenomethione and vitamin E (120 mg/kg feed) could be used to improve egg characteristics and incubation response. © 2015 Poultry Science Association Inc.

  3. Hematological values and body, heart and liver weights of male and female broiler embryos of young and old breeder eggs

    Directory of Open Access Journals (Sweden)

    VS Morita

    2009-03-01

    Full Text Available This study analyzed broiler breeder age (29 or 60 wk-old effects on physical characteristics of eggs (initial mass, mass loss, volume, diameter, surface area and density and of eggshells(weight, volume, thickness, conductance, and porosity , as well as the influence of embryo sex on hematological parameters and body, liver and heart weights during incubation (at days 13, 15, 18 and 21. Physical parameter values were lower in 29-wk-old broiler breeder eggs than those of 60-wk-old breeders, except for relative eggshell weight, which was higher. In both male and female embryos, erythrocytic parameters and the body, liver, and heart weights increased during the incubation. The embryos and their organs were heavier when derived from 60-wk-old breeder eggs as compared to 29-wk-old breeder eggs. At hatching, hematocrit values were higher in males than in females. Thrombocytes were the most frequent leukocytes in the blood. Thrombocyte percentage decreased and lymphocyte percentage increased during the last days of incubation. The results showed maternal age influence only on body, heart and liver weights, focal sex-related influence the hematocrit at hatching, and temporal effect of incubation on body and organ weights, as well as on red blood cell count, hematocrit, hemoglobin, plasma glucose, and lymphocytes, which increased during the incubation period, while mean corpuscular volume and thrombocyte values decreased.

  4. Exploring climatic controls on blanket bog litter decomposition across an altitudinal gradient

    Science.gov (United States)

    Bell, Michael; Ritson, Jonathan P.; Clark, Joanna M.; Verhoef, Anne; Brazier, Richard E.

    2016-04-01

    The hydrological and ecological functioning of blanket bogs is strongly coupled, involving multiple ecohydrological feedbacks which can affect carbon cycling. Cool and wet conditions inhibit decomposition, and favour the growth of Sphagnum mosses which produce highly recalcitrant litter. A small but persistent imbalance between production and decomposition has led to blanket bogs in the UK accumulating large amounts of carbon. Additionally, healthy bogs provide a suite of other ecosystems services including water regulation and drinking water provision. However, there is concern that climate change could increase rates of litter decomposition and disrupt this carbon sink. Furthermore, it has been argued that the response of these ecosystems in the warmer south west and west of the UK may provide an early analogue for later changes in the more extensive northern peatlands. In order to investigate the effects of climate change on blanket bog litter decomposition, we set-up a litter bag experiment across an altitudinal gradient spanning 200 m of elevation (including a transition from moorland to healthy blanket bog) on Dartmoor, an area of hitherto unstudied, climatically marginal blanket bog in the south west of the UK. At seven sites, water table depth and soil and surface temperature were recorded continuously. Litter bags filled with the litter of three vegetation species dominant on Dartmoor were incubated just below the bog surface and retrieved over a period of 12 months. We found significant differences in the rate of decomposition between species. At all sites, decomposition progressed in the order Calluna vulgaris (dwarf shrub) > Molinia caerulea (graminoid) > Sphagnum (bryophyte). However, while soil temperature did decrease along the altitudinal gradient, being warmer in the lower altitudes, a hypothesised accompanying decrease in decomposition rates did not occur. This could be explained by greater N deposition at the higher elevation sites (estimated

  5. Upflow anaerobic sludge blanket reactor--a review.

    Science.gov (United States)

    Bal, A S; Dhagat, N N

    2001-04-01

    . Concentrated waste (usually sewage sludge) can be added continuously or periodically (semi-batch operation), where it is mixed with the contents of the reactor. Theoretically, the conventional digester is operated as a once-through, completely mixed, reactor. In this particular mode of operation the hydraulic retention time (HRT) is equal to the solids retention time (SRT). Basically, the required process efficiency is related to the sludge retention time (SRT), and hence longer SRT provided, results in satisfactory population (by reproduction) for further waste stabilization. By reducing the hydraulic retention time (HRT) in the conventional mode reactor, the quantity of biological solids within the reactor is also decreased as the solids escape with the effluent. The limiting HRT is reached when the bacteria are removed from the reactor faster than they can grow. Methanogenic bacteria are slow growers and are considered the rate-limiting component in the anaerobic digestion process. The first anaerobic process developed, which separated the SRT from the HRT was the anaerobic contact process. In 1963, Young and McCarty (1968) began work, which eventually led to the development of the anaerobic upflow filter (AF) process. The anaerobic filter represented a significant advance in anaerobic waste treatment, since the filter can trap and maintain a high concentration of biological solids. By trapping these solids, long SRT's could be obtained at large waste flows, necessary to anaerobically treat low strength wastes at nominal temperatures economically. Another anaerobic process which relies on the development of biomass on the surfaces of a media is an expanded bed upflow reactor. The primary concept of the process consists of passing wastewater up through a bed of inert sand sized particles at sufficient velocities to fluidize and partially expand the sand bed. One of the more interesting new processes is the upflow anaerobic sludge blanket process (UASB), which was developed

  6. Impact of transportation duration on stress responses in day-old chicks from young and old breeders.

    Science.gov (United States)

    Jacobs, Leonie; Delezie, Evelyne; Duchateau, Luc; Goethals, Klara; Ampe, Bart; Buyse, Johan; Tuyttens, Frank Andre Maurice

    2017-06-01

    The aim of this study was to assess the interaction effect of transportation duration and parental age on physiological stress responses and quality in day-old chicks. After hatch, 3240 chicks from either 29-week old (young) or 60-week old (old) broiler breeders were transported for 1.5h (short) or 11h (long). Thereafter, 228 chicks were assessed for quality and blood plasma was assayed for corticosterone (CORT), lactate, glucose, and thiobarbituric acid-reactive substances (TBARS, increased concentrations can indicate oxidative stress). No interaction effects of parental age and transportation duration were found (all P>0.10). Chicks from young breeders showed higher CORT levels (P=0.007) and were of higher quality (Tona method, Ptransportation, chicks showed increased CORT (Ptransportation. No evidence was provided that long transportation differently affected the quality or stress responses of chicks from breeder flocks of two ages. Copyright © 2017. Published by Elsevier Ltd.

  7. Instrumentation and control system for the prototype fast breeder reactor 'MONJU' power station

    Energy Technology Data Exchange (ETDEWEB)

    Hara, Hiroshi (Power Reactor and Nuclear Fuel Development Corp., Tokyo (Japan)); Mae, Yoshinori; Ishida, Takayuki; Hashiura, Kazuhiko; Kasai, Shozo; Yamamoto, Hajime

    1989-10-01

    The fast breeder reactor 'Monju' power station is constructed as the nuclear power station of next generation in Tsuruga City, Fukui Prefecture. In order to realize high safety and operational reliability as the newest nuclear power station, the measurement and control system of Monju (electric power output 280 MW) has been designed and manufactured by reflecting the experiences of construction and operation of the experimental FBR 'Joyo' and the results of various research and development of sodium instrumentation and others, and by using the latest digital control technology and multiplexing system technology. In this paper, the results of development of the characteristic measurement and control technology as fast breeder reactors and the state of application to the measurement and control system which was designed and manufactured for Monju are described. Central monitoring panel, plant control system, sodium instrumentation, preheating control system and so on are reported. In the case of Monju, the heat capacity and thermal inertia of the primary and secondary cooling systems are large, and the system comprises three loops. (K.I.).

  8. The evolving landscape of plant breeders rights regarding wheat varieties in South Africa

    Directory of Open Access Journals (Sweden)

    Charity R. Nhemachena

    2016-03-01

    Full Text Available Addressing the multiple challenges facing global agriculture requires integrated innovation in areas such as seeds, biotechnology, crop protection, grain storage and transport. Innovations related to plant improvement and the development of new or improved plant varieties will only happen at an optimal level if plant breeders rights (PBR are properly protected. The objective was to analyse the evolving landscape of wheat plant breeders rights to address the dearth of empirical evidence of the patterns and trends of wheat varietal improvements in South Africa. We compiled a detailed and novel count and attribute database of wheat varietal innovations in South Africa from 1979 to 2013 using various sources. This data set was then analysed to ascertain the main trends in, and ownership of PBRs for wheat varietal improvements in South Africa over this period. A total of 134 PBR wheat varietal innovations were lodged from 1979 to 2013, an average of 6 applications per year. The administrative delays in granting PBR applications were substantially reduced by 77 days during the post-deregulation period (after 1996, indicating increased efficiency. The main PBR applicants were Sensako (39%, the Agricultural Research Council Small Grains Institute (ARC-SGI (25% and Pannar (15%. The ARC-SGI contributed to some of the PBRs owned by private companies through shared genetic resources before Plant Variety Protection (PVP was implemented. Future innovations and dissemination of wheat innovations can be stimulated by plant variety protection, together with broader variety sector legislation that encourages both public and private sector investment.

  9. Review of uncertainty estimates associated with models for assessing the impact of breeder reactor radioactivity releases

    Energy Technology Data Exchange (ETDEWEB)

    Miller, C.; Little, C.A.

    1982-08-01

    The purpose is to summarize estimates based on currently available data of the uncertainty associated with radiological assessment models. The models being examined herein are those recommended previously for use in breeder reactor assessments. Uncertainty estimates are presented for models of atmospheric and hydrologic transport, terrestrial and aquatic food-chain bioaccumulation, and internal and external dosimetry. Both long-term and short-term release conditions are discussed. The uncertainty estimates presented in this report indicate that, for many sites, generic models and representative parameter values may be used to calculate doses from annual average radionuclide releases when these calculated doses are on the order of one-tenth or less of a relevant dose limit. For short-term, accidental releases, especially those from breeder reactors located in sites dominated by complex terrain and/or coastal meteorology, the uncertainty in the dose calculations may be much larger than an order of magnitude. As a result, it may be necessary to incorporate site-specific information into the dose calculation under these circumstances to reduce this uncertainty. However, even using site-specific information, natural variability and the uncertainties in the dose conversion factor will likely result in an overall uncertainty of greater than an order of magnitude for predictions of dose or concentration in environmental media following shortterm releases.

  10. Longitudinal study of transmission of Escherichia coli from broiler breeders to broilers.

    Science.gov (United States)

    Poulsen, Louise Ladefoged; Thøfner, Ida; Bisgaard, Magne; Christensen, Jens Peter; Olsen, Rikke Heidemann; Christensen, Henrik

    2017-08-01

    Escherichia coli is of major importance in industrial broiler production as the main cause of salpingitis and peritonitis in broiler breeders. Furthermore E. coli is the most common cause of first week mortality in broiler chickens. The aim of the present study was to investigate the transmission of E. coli, isolated from broiler breeders with salpingitis, to the progeny and the possibility of subsequent first week mortality. Four parent flocks were followed during the whole production period (20-60 weeks) by post mortem and bacteriological examination of randomly selected dead birds. Newly hatched chickens from each flock were swabbed in the cloaca on four occasions (parent age 30, 40, 50, 60 weeks) and E. coli was isolated. Causes of first week mortality were determined pathologically and bacteriologically. E. coli isolates from parents, newly hatched chickens and first week mortality were selected for Pulsed-Field-Gel-Electrophoresis (PFGE) and Multi-Locus-Sequence-Typing (MLST) to determine their clonal relationships. E. coli was the main cause of both salpingitis in parents and first week mortality in broilers, and E. coli dominated the bacterial flora of the cloaca of newly hatched chickens. PFGE of E. coli showed identical band patterns in isolates from the three different sources indicating a transmission of E. coli from parent birds to chickens. In conclusion, E. coli isolated from salpingitis in broiler parents were found to be transmitted to broilers in which some sequence types contributed to the first week mortality. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Distribution and Genetic Profiles of Campylobacter in Commercial Broiler Production from Breeder to Slaughter in Thailand

    Science.gov (United States)

    Prachantasena, Sakaoporn; Charununtakorn, Petcharatt; Muangnoicharoen, Suthida; Hankla, Luck; Techawal, Natthaporn; Chaveerach, Prapansak; Tuitemwong, Pravate; Chokesajjawatee, Nipa; Williams, Nicola; Humphrey, Tom; Luangtongkum, Taradon

    2016-01-01

    Poultry and poultry products are commonly considered as the major vehicle of Campylobacter infection in humans worldwide. To reduce the number of human cases, the epidemiology of Campylobacter in poultry must be better understood. Therefore, the objective of the present study was to determine the distribution and genetic relatedness of Campylobacter in the Thai chicken production industry. During June to October 2012, entire broiler production processes (i.e., breeder flock, hatchery, broiler farm and slaughterhouse) of five broiler production chains were investigated chronologically. Representative isolates of C. jejuni from each production stage were characterized by flaA SVR sequencing and multilocus sequence typing (MLST). Amongst 311 selected isolates, 29 flaA SVR alleles and 17 sequence types (STs) were identified. The common clonal complexes (CCs) found in this study were CC-45, CC-353, CC-354 and CC-574. C. jejuni isolated from breeders were distantly related to those isolated from broilers and chicken carcasses, while C. jejuni isolates from the slaughterhouse environment and meat products were similar to those isolated from broiler flocks. Genotypic identification of C. jejuni in slaughterhouses indicated that broilers were the main source of Campylobacter contamination of chicken meat during processing. To effectively reduce Campylobacter in poultry meat products, control and prevention strategies should be aimed at both farm and slaughterhouse levels. PMID:26886590

  12. Effects of broiler breeder management on pullet body weight and carcass uniformity.

    Science.gov (United States)

    Zuidhof, M J; Holm, D E; Renema, R A; Jalal, M A; Robinson, F E

    2015-06-01

    An experiment was conducted to study the effect of broiler breeder feeding management practices on pullet performance, BW uniformity, and carcass traits during rearing (to 22 wk of age). At 3 wk of age, 1,200 Ross 308 breeder pullets were assigned to one of 5 treatments: 1) control: standard mash diet, fed daily; 2) high fiber: mash diet containing 25% lower nutrient density, fed daily; 3) scatter: standard diet in pellet form scattered on litter, fed daily; 4) skip-a-day: standard mash diet, fed on alternate days; or 5) grading: standard mash diet, fed daily (birds sorted into low, average, and high BW groups every 4 wk). Birds on the high fiber treatment consumed more feed (Puniformity at 22 wk of age (CV=6.2%), while control and high fiber treatment groups were least uniform (CV>15%; Puniformity relative to the control during the most intense period of feed restriction (7 to 19 wk). Scatter feeding increased flock uniformity to a small degree, whereas grading yielded the highest increase in BW and carcass trait uniformity. © 2015 Poultry Science Association Inc.

  13. Pathological Responses of White Leghorn Breeder Hens Kept on Ochratoxin A Contaminated Feed

    Directory of Open Access Journals (Sweden)

    Zahoor-ul-Hassan, M. Zargham Khan*, Ahrar Khan and Ijaz Javed1

    2010-04-01

    Full Text Available Mycotoxins are among the most important environmental contaminants. In the present study, ochratoxin A (OTA was produced by propagation of Aspergillus ochraceus and fed to breeder hens. For this purpose, 84 breeder hens were divided into seven groups (A-G. Group A served as control, while groups B, C, D, E, F and G were fed OTA at 0.1, 0.5, 1.0, 3.0, 5.0 and 10.0 mg/Kg feed, respectively for 3 weeks. Clinical signs, feed intake, feed conversion ratio and egg mass production were recorded on daily basis, while body weight was recorded on weekly basis. Lesions on visceral organs and serum biochemical parameters were determined. Significant decrease in feed intake, body weight and egg mass production was found in the OTA treated groups compared to control (P<0.05. Among different groups, diarrhea, unthriftiness, water intake and depression increased with increase in dietary OTA levels. Enlargement and hemorrhages on liver and kidney were more severe in birds fed higher dietary OTA levels. Serum ALT, urea, creatinine and total protein levels were significantly higher in OTA treated groups. It was concluded that production performance, pathological alterations and serum biochemical changes determined became more severe with increase in dietary levels of OTA.

  14. Observations on Arthritis in Broiler Breeder Chickens Experimentally Infected with Staphylococcus aureus

    Directory of Open Access Journals (Sweden)

    Chang-Qin Gu§, Xue-Ying Hu§, Chang-Qing Xie1, Wan-Po Zhang, De-Hai Wang, Quan Zhou and Guo-Fu Cheng1*

    2013-04-01

    Full Text Available Staphylococcus aureus is the most common cause of bacterial arthritis in broiler breeder chickens. In this study, we established a model of broiler breeder chicken arthritis inoculated with Staph. aureus isolated from a spontaneously occurring bacterial arthritis in chickens. We evaluated the model by bacteriology, serology, pathology, and immunology. The results showed that 2.5 × 109 cfu Staph. aureus injected into the right joint cavity can successfully induce a chicken arthritis model. The majority of the infected chickens suffered lameness and joint swelling at 3 days post-inoculation (DPI. The death peak time was on 7 DPI and the mortality rate was 51.1%. Staph. aureus can be continuously isolated from the blood and left joint synovial fluid of the infected chickens. Lesions found on the infected chickens consisted of swollen joints full of caseous exudates, cartilage injury, and synovial membrane thickening with infiltration of inflammatory cells. The center of the lesion contained many round bacterial cocci. With joint injury aggravation, intra-articular hyaluronic acid gradually decreased, and serum interleukin-6 became significantly higher compared with the control (P<0.01 from 3 DPI. The results indicated that the chicken models of Staph. aureus-mediated arthritis were successful, and can be used to gain a better understanding of the host-bacterium relationship.

  15. Fission-fusion dynamics over large distances in raven non-breeders.

    Science.gov (United States)

    Loretto, Matthias-Claudio; Schuster, Richard; Itty, Christian; Marchand, Pascal; Genero, Fulvio; Bugnyar, Thomas

    2017-03-23

    The influence of fission-fusion dynamics, i.e., temporal variation in group size and composition, on social complexity has been studied in large-brained mammals that rely on social bonds. Little is known about birds, even though some species like ravens have recently received attention for their socio-cognitive skills and use of social bonds. While raven breeders defend territories year-round, non-breeders roam through large areas and form groups at food sources or night roosts. We here examined the fission-fusion patterns of non-breeding ravens over years, investigating whether birds meet repeatedly either at the same or at different locations. We combined four large datasets: presence-absence observations from two study sites (Austria, Italy) and GPS-tracking of ravens across two study areas (Austria, France). As expected, we found a highly dynamic system in which individuals with long phases of temporary settlement had a high probability of meeting others. Although GPS-tagged ravens spread out over thousands of square kilometres, we found repeated associations between almost half of the possible combinations at different locations. Such a system makes repeated interactions between individuals at different sites possible and likely. High fission-fusion dynamics may thus not hinder but shape the social complexity of ravens and, possibly, other long-term bonded birds.

  16. Molting of broiler breeders conditions for economic justification in continued production

    Directory of Open Access Journals (Sweden)

    Pešic Bratislav

    2016-01-01

    Full Text Available The method of artificial interruption of the production process by hens, broiler breeders, today known as the molting, it is often used in recent years as one of possible reasonable steps in making decisions on feasibility of continuing exploitation of broiler breeder's after the regular production process. The aim of this study was to test the economic profitability molting hens-broile, during one exploitation period. It included the throat of hybrid heavy line COBB500. The animals in the house were exposed to the same microclimate conditions, with identical positions in relation to light, ventilation, water, food and fertilization system. The analysis of food consumption per produced egg can be notice that parents ' hens during the process of molting consume more food by 43% compared to the hens fed the normal cycle of production. Achieved income was 2.54% higher after billing code for molting chickens instead of the regular production cycle. Economic indicators egg production after molting demonstrate justification of these biological and technological operations, considering that the net income per hen housed is the same income in the normal production process.

  17. Enterococcal-related vertebral osteoarthritis in South African broiler breeders: A case report

    Directory of Open Access Journals (Sweden)

    Henry Aitchison

    2014-02-01

    Full Text Available Infections in broilers and broiler breeders by Enterococcus cecorum, causing clinical disease, have increasingly been described in various countries in the Northern Hemisphere over the past decade. This case report describes an outbreak of enterococcal-associated vertebral osteoarthritis (EVOA in male broiler breeders in several flocks in South Africa. Male birds aged 4 and 9 weeks displayed the common presentation of lameness, paresis or complete paralysis. Autopsies of culled birds revealed masses on caudal thoracic vertebrae T5–T7, with vertebral osteomyelitis and spondylitis. Microbiological assays identified E. cecorum cultured from spondylitic lesions. Affected flocks were treated with amoxycillin at 25 mg/kg in the drinking water for 5 days, resulting in decreased numbers of lame birds and culls. The origin and pathogenesis of EVOA are poorly understood, which limits prevention to environmental factors that may inhibit systemic access by the enteric bacteria. Skeletal growth trends of male birds are thought to increase their susceptibility to bacterial colonisation at sites of skeletal strain, resulting in abscesses and lesions. Evidence points to the emergence of E. cecorum strains with increased pathogenicity; this highlights the need for greater understanding of the origins, treatment and prevention of EVOA to minimise its economic impact on poultry operations.

  18. Correlations among behavior, performance and environment in broiler breeders using multivariate analysis

    Directory of Open Access Journals (Sweden)

    DF Pereira

    2007-12-01

    Full Text Available Animal welfare issues have received much attention not only to supply farmed animal requirements, but also to ethical and cultural public concerns. Daily collected information, as well as the systematic follow-up of production stages, produces important statistical data for production assessment and control, as well as for improvement possibilities. In this scenario, this research study analyzed behavioral, production, and environmental data using Main Component Multivariable Analysis, which correlated observed behaviors, recorded using video cameras and electronic identification, with performance parameters of female broiler breeders. The aim was to start building a system to support decision-making in broiler breeder housing, based on bird behavioral parameters. Birds were housed in an environmental chamber, with three pens with different controlled environments. Bird sensitivity to environmental conditions were indicated by their behaviors, stressing the importance of behavioral observations for modern poultry management. A strong association between performance parameters and the behavior "at the nest", suggesting that this behavior may be used to predict productivity. The behaviors of "ruffling feathers", "opening wings", "preening", and "at the drinker" were negatively correlated with environmental temperature, suggesting that the increase of in the frequency of these behaviors indicate improvement of thermal welfare.

  19. Distribution and Genetic Profiles of Campylobacter in Commercial Broiler Production from Breeder to Slaughter in Thailand.

    Directory of Open Access Journals (Sweden)

    Sakaoporn Prachantasena

    Full Text Available Poultry and poultry products are commonly considered as the major vehicle of Campylobacter infection in humans worldwide. To reduce the number of human cases, the epidemiology of Campylobacter in poultry must be better understood. Therefore, the objective of the present study was to determine the distribution and genetic relatedness of Campylobacter in the Thai chicken production industry. During June to October 2012, entire broiler production processes (i.e., breeder flock, hatchery, broiler farm and slaughterhouse of five broiler production chains were investigated chronologically. Representative isolates of C. jejuni from each production stage were characterized by flaA SVR sequencing and multilocus sequence typing (MLST. Amongst 311 selected isolates, 29 flaA SVR alleles and 17 sequence types (STs were identified. The common clonal complexes (CCs found in this study were CC-45, CC-353, CC-354 and CC-574. C. jejuni isolated from breeders were distantly related to those isolated from broilers and chicken carcasses, while C. jejuni isolates from the slaughterhouse environment and meat products were similar to those isolated from broiler flocks. Genotypic identification of C. jejuni in slaughterhouses indicated that broilers were the main source of Campylobacter contamination of chicken meat during processing. To effectively reduce Campylobacter in poultry meat products, control and prevention strategies should be aimed at both farm and slaughterhouse levels.

  20. Severe inbreeding and small effective number of breeders in a formerly abundant marine fish.

    Directory of Open Access Journals (Sweden)

    Shannon J O'Leary

    Full Text Available In contrast to freshwater fish it is presumed that marine fish are unlikely to spawn with close relatives due to the dilution effect of large breeding populations and their propensity for movement and reproductive mixing. Inbreeding is therefore not typically a focal concern of marine fish management. We measured the effective number of breeders in 6 New York estuaries for winter flounder (Pseudopleuronectes americanus, a formerly abundant fish, using 11 microsatellite markers (6-56 alleles per locus. The effective number of breeders for 1-2 years was remarkably small, with point estimates ranging from 65-289 individuals. Excess homozygosity was detected at 10 loci in all bays (FIS = 0.169-0.283 and individuals exhibited high average internal relatedness (IR; mean = 0.226. These both indicate that inbreeding is very common in all bays, after testing for and ruling out alternative explanations such as technical and sampling artifacts. This study demonstrates that even historically common marine fish can be prone to inbreeding, a factor that should be considered in fisheries management and conservation plans.

  1. Severe Inbreeding and Small Effective Number of Breeders in a Formerly Abundant Marine Fish

    Science.gov (United States)

    O'Leary, Shannon J.; Hice, Lyndie A.; Feldheim, Kevin A.; Frisk, Michael G.; McElroy, Anne E.; Fast, Mark D.; Chapman, Demian D.

    2013-01-01

    In contrast to freshwater fish it is presumed that marine fish are unlikely to spawn with close relatives due to the dilution effect of large breeding populations and their propensity for movement and reproductive mixing. Inbreeding is therefore not typically a focal concern of marine fish management. We measured the effective number of breeders in 6 New York estuaries for winter flounder (Pseudopleuronectes americanus), a formerly abundant fish, using 11 microsatellite markers (6–56 alleles per locus). The effective number of breeders for 1–2 years was remarkably small, with point estimates ranging from 65–289 individuals. Excess homozygosity was detected at 10 loci in all bays (FIS = 0.169–0.283) and individuals exhibited high average internal relatedness (IR; mean = 0.226). These both indicate that inbreeding is very common in all bays, after testing for and ruling out alternative explanations such as technical and sampling artifacts. This study demonstrates that even historically common marine fish can be prone to inbreeding, a factor that should be considered in fisheries management and conservation plans. PMID:23762473

  2. The effects of a reduced balanced protein diet on litter moisture, pododermatitis and feather condition of female broiler breeders over three generations.

    Science.gov (United States)

    Li, C; Lesuisse, J; Schallier, S; Clímaco, W; Wang, Y; Bautil, A; Everaert, N; Buyse, J

    2017-11-02

    Protein content reduction in broiler breeder diets has been increasingly investigated. However, broiler breeders reared on low protein diets are characterized by a deterioration of the feather condition. Furthermore, polydipsia induced by controlled feed intake increases litter moisture and as a consequence pododermatitis. This project aimed to study the litter moisture, pododermatitis and feather condition of breeders fed with a 25% reduced balanced protein (RP) diet during the rearing and laying period over three successive generations. The experiment started with two treatments for the F0 generation: control (C) group fed with standard C diets and RP group fed with RP diets. The female F0-progeny of each treatment was divided into the two dietary treatments as well, resulting in four treatments for the F1 generation: C/C, C/RP, RP/C and RP/RP (breeder feed in F0/F1 generation). The RP diet fed breeders received on average 10% more feed than C diet fed breeders to achieve the same target BW. The female F1-progeny of each treatment were all fed with C diets which resulted in four treatments for the F2 generation: C/C/C, C/RP/C, RP/C/C and RP/RP/C (breeder feed in F0/F1/F2 generation). Litter moisture, footpad and hock dermatitis were recorded at regular intervals throughout the experimental period in all three generations. For the F0 and F1 generation, the pens of breeders receiving C diets had significantly higher litter moisture than the RP diets fed groups (P<0.05), resulting in an elevated footpad dermatitis occurrence (FDO) (P<0.05). No difference was found in the F2 generation. The feather condition was scored during the laying period for each generation. F0 and F1 breeders reared on the RP diets had poorer feather condition than those receiving the C diets (P<0.05). The C/RP breeders had a significantly poorer feather condition than RP/RP breeders (P<0.05). For the F2 generation, RP/RP/C breeders had a significantly better feather condition compared with

  3. Comparison of forced-air warming systems with lower body blankets using a copper manikin of the human body.

    Science.gov (United States)

    Bräuer, A; English, M J M; Lorenz, N; Steinmetz, N; Perl, T; Braun, U; Weyland, W

    2003-01-01

    Forced-air warming has gained high acceptance as a measure for the prevention of intraoperative hypothermia. However, data on heat transfer with lower body blankets are not yet available. This study was conducted to determine the heat transfer efficacy of six complete lower body warming systems. Heat transfer of forced-air warmers can be described as follows:[1]Qdot;=h.DeltaT.A where Qdot; = heat transfer [W], h = heat exchange coefficient [W m-2 degrees C-1], DeltaT = temperature gradient between blanket and surface [ degrees C], A = covered area [m2]. We tested the following forced-air warmers in a previously validated copper manikin of the human body: (1) Bair Hugger and lower body blanket (Augustine Medical Inc., Eden Prairie, MN); (2) Thermacare and lower body blanket (Gaymar Industries, Orchard Park, NY); (3) WarmAir and lower body blanket (Cincinnati Sub-Zero Products, Cincinnati, OH); (4) Warm-Gard(R) and lower body blanket (Luis Gibeck AB, Upplands Väsby, Sweden); (5) Warm-Gard and reusable lower body blanket (Luis Gibeck AB); and (6) WarmTouch and lower body blanket (Mallinckrodt Medical Inc., St. Luis, MO). Heat flux and surface temperature were measured with 16 calibrated heat flux transducers. Blanket temperature was measured using 16 thermocouples. DeltaT was varied between -10 and +10 degrees C and h was determined by a linear regression analysis as the slope of DeltaT vs. heat flux. Mean DeltaT was determined for surface temperatures between 36 and 38 degrees C, because similar mean skin temperatures have been found in volunteers. The area covered by the blankets was estimated to be 0.54 m2. Heat transfer from the blanket to the manikin was different for surface temperatures between 36 degrees C and 38 degrees C. At a surface temperature of 36 degrees C the heat transfer was higher (between 13.4 W to 18.3 W) than at surface temperatures of 38 degrees C (8-11.5 W). The highest heat transfer was delivered by the Thermacare system (8.3-18.3 W), the

  4. An electro-hydraulic servo control system research for CFETR blanket RH

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Changqi [Hefei University of Technology, Hefei 230009, Anhui (China); Tang, Hongjun, E-mail: taurustang@126.com [Hefei University of Technology, Hefei 230009, Anhui (China); Qi, Songsong [Hefei University of Technology, Hefei 230009, Anhui (China); Cheng, Yong; Feng, Hansheng; Peng, Xuebing; Song, Yuntao [Institute of Plasma Physics Chinese Academy of Sciences, Hefei 230031, Anhui (China)

    2014-11-15

    Highlights: • We discussed the conceptual design of CFETR blanket RH maintenance system. • The mathematical model of electro-hydraulic servo system was calculated. • A fuzzy adaptive PD controller was designed based on control theory and experience. • The co-simulation models of the system were established with AMESim/Simulink. • The fuzzy adaptive PD algorithm was designed as the core strategy of the system. - Abstract: Based on the technical design requirements of China Fusion Engineering Test Reactor (CFETR) blanket remote handling (RH) maintenance, this paper focus on the control method of achieving high synchronization accuracy of electro-hydraulic servo system. Based on fuzzy control theory and practical experience, a fuzzy adaptive proportional-derivative (PD) controller was designed. Then a more precise co-simulation model was established with AMESim/Simulink. Through the analysis of simulation results, a fuzzy adaptive PD control algorithm was designed as the core strategy of electro-hydraulic servo control system.

  5. Annular core liquid-salt cooled reactor with multiple fuel and blanket zones

    Science.gov (United States)

    Peterson, Per F.

    2013-05-14

    A liquid fluoride salt cooled, high temperature reactor having a reactor vessel with a pebble-bed reactor core. The reactor core comprises a pebble injection inlet located at a bottom end of the reactor core and a pebble defueling outlet located at a top end of the reactor core, an inner reflector, outer reflector, and an annular pebble-bed region disposed in between the inner reflector and outer reflector. The annular pebble-bed region comprises an annular channel configured for receiving pebble fuel at the pebble injection inlet, the pebble fuel comprising a combination of seed and blanket pebbles having a density lower than the coolant such that the pebbles have positive buoyancy and migrate upward in said annular pebble-bed region toward the defueling outlet. The annular pebble-bed region comprises alternating radial layers of seed pebbles and blanket pebbles.

  6. Magnetohydrodynamic (MHD) considerations for liquid metal blanket and a SiC/SiC composite structure

    Energy Technology Data Exchange (ETDEWEB)

    Scholz, R.; Greeff, J. de; Vinche, C. [Commission Europeenne Community, JRC, Vatican City State, Holy See (Italy)

    1998-07-01

    The electrical conductivity was measured on SiC/SiC composite specimens, in the as-received conditions and after neutron irradiation, for temperatures between 20 deg. C and 1000 deg. C. The tests were aimed at estimating the magnitude of MHD effects in liquid metal blankets and a SiC/SiC composites structure. The electrical conductivity of the unirradiated samples increased continuously with temperature and ranged from 330 ({omega} m){sup -1} at 20 deg. C to 550 ({omega} m){sup -1} at 1000 deg.C. The irradiation reduced only slightly the magnitude of {sigma} indicating the materials tested cannot be treated as an electrical insulator in a MHD analysis for liquid metal blankets. (authors)

  7. Applicability of tungsten/EUROFER blanket module for the DEMO first wall

    Science.gov (United States)

    Igitkhanov, Yu.; Bazylev, B.; Landman, I.; Boccaccini, L.

    2013-07-01

    In this paper we analyse a sandwich-type blanket configuration of W/EUROFER for DEMO first wall under steady-state normal operation and off-normal conditions, such as vertical displacements and runaway electrons. The heat deposition and consequent erosion of the tungsten armour is modelled under condition of helium cooling of the first wall blanket module and by taking into account the conversion of the magnetic energy stored in the runaway electron current into heat through the ohmic dissipation of the return current induced in the metallic armour structure. It is shown that under steady-state DEMO operation the first wall sandwich type module will tolerate heat loads up to ˜14 MW/m2. It will also sustain the off-normal events, apart from the hot vertical displacement events, which will melt the tungsten armour surface.

  8. Applicability of tungsten/EUROFER blanket module for the DEMO first wall

    Energy Technology Data Exchange (ETDEWEB)

    Igitkhanov, Yu., E-mail: juri.igitkhanov@lhm.fzk.de [Karlsruhe Institute of Technology, IHM, Karlsruhe (Germany); Bazylev, B.; Landman, I. [Karlsruhe Institute of Technology, IHM, Karlsruhe (Germany); Boccaccini, L. [Karlsruhe Institute of Technology, INR, Karlsruhe (Germany)

    2013-07-15

    In this paper we analyse a sandwich-type blanket configuration of W/EUROFER for DEMO first wall under steady-state normal operation and off-normal conditions, such as vertical displacements and runaway electrons. The heat deposition and consequent erosion of the tungsten armour is modelled under condition of helium cooling of the first wall blanket module and by taking into account the conversion of the magnetic energy stored in the runaway electron current into heat through the ohmic dissipation of the return current induced in the metallic armour structure. It is shown that under steady-state DEMO operation the first wall sandwich type module will tolerate heat loads up to ∼14 MW/m{sup 2}. It will also sustain the off-normal events, apart from the hot vertical displacement events, which will melt the tungsten armour surface.

  9. Molecular Characterization of Motile Serovars of Salmonella enterica from Breeder and Commercial Broiler Poultry Farms in Bangladesh

    Science.gov (United States)

    Barua, Himel; Biswas, Paritosh K.; Olsen, Katharina E. P.; Shil, Subrata K.; Christensen, Jens P.

    2013-01-01

    Contaminated poultry and poultry products are a major source of motile Salmonellae for human salmonellosis worldwide. Local circulation of any motile Salmonella serovar in poultry has a wider public health impact beyond its source of origin for being dispersed elsewhere through poultry trades or human travels. To investigate the status of motile Salmonella serovars in breeder farms in Bangladesh, multiple flocks of two breeder farms were observed for a period of six months. In addition, a cross-sectional survey was carried out to determine the prevalence and serovar distribution of motile Salmonella by randomly selecting 100 commercial broiler poultry farms. Five pooled faecal samples representing an entire housed flock of breeders or broilers were screened for presence of motile Salmonella following conventional bacteriological procedures. The Salmonella isolates obtained were subsequently serotyped, and characterized by plasmid profiling and pulsed-field gel electrophoresis (PFGE). The results revealed that both the breeder farms were positive with three Salmonella serovars: S. Virchow, S. Paratyphi B var Java (S. Java) and S. Enteritidis. Eleven of the 100 broiler farms investigated were positive for motile Salmonella, giving a farm-level prevalence of 11% (95% confidence interval 5–17%). S. Virchow and S. Kentucky were the two predominant serovars isolated from the broiler farms. The PFGE genotyping demonstrated that the isolates belonging to the same serovars were closely related due to variation in only 1–4 bands. All the S. Virchow and S. Java isolates, irrespective of breeder or broiler farm origin, were plasmid-free, except for one S. Virchow isolate from a broiler farm that harboured a 9.7 kb-sized plasmid. The S. Kentucky isolates belonged to three plasmid profiles having plasmids of four different sizes, ranging from 2.7 to 109 kb. This is the first report of any motile Salmonella serovars from breeder and commercial broiler poultry farms in

  10. Effects of acute and chronic heat stress on plasma metabolites, hormones and oxidant status in restrictedly fed broiler breeders.

    Science.gov (United States)

    Xie, Jingjing; Tang, Li; Lu, Lin; Zhang, Liyang; Lin, Xi; Liu, Hsiao-Ching; Odle, Jack; Luo, Xugang

    2015-07-01

    Heat tolerance can be improved by feed restriction in broiler chickens. It is unknown whether the same is true for broiler breeders, which are restrictedly fed. Therefore, the current study was conducted to study the effects of heat stress on plasma metabolites, hormones, and oxidative status of restricted fed broiler breeders with special emphases on the temperature and latency of heat exposure. In trial 1, 12 broiler breeders were kept either in a thermoneutral chamber (21°C, control, n = 6) or in a chamber with a step-wise increased environmental temperature from 21 to 33°C (21, 25, 29, 33°C, heat-stressed, n = 6). Changes in plasma total cholesterol, glucose, and triiodothyronine (T3) were closely related to the environmental temperature. When the temperature reached 29°C, plasma T3 (P broiler breeders were divided into 2 groups and raised under 21°C and 32°C for 8 weeks, respectively. Total cholesterol was increased in chronic heat-stressed broiler breeders after 4 weeks. Plasma lactate dehydrogenase (LDH, P = 0.047) and glutamic-oxaloacetic transaminase (GOT, P = 0.036) was up-regulated after 6 weeks of thermal treatment, whereas plasma CK (P = 0.009) was increased at the end of thermal treatment. Plasma malonaldehyde, protein carbonyl content, activity of total superoxide dismutase (SOD), and corticosterone content were not altered after acute and prolonged heat challenges. Taken together, acute heat stress primarily resulted in disturbance of plasma metabolites, whereas chronic heat stress caused tissue damage reflected by increased plasma LDA, GOT, and CK. During acute heat stress, plasma metabolites were minimally disturbed in broiler breeders until the environmental temperature reached 33°C. © 2015 Poultry Science Association Inc.

  11. Differences in behavioral characteristics between dogs obtained as puppies from pet stores and those obtained from noncommercial breeders.

    Science.gov (United States)

    McMillan, Franklin D; Serpell, James A; Duffy, Deborah L; Masaoud, Elmabrok; Dohoo, Ian R

    2013-05-15

    To compare the owner-reported prevalence of behavioral characteristics in dogs obtained as puppies from pet stores with that of dogs obtained as puppies from noncommercial breeders. Cross-sectional study. Animals-Dogs obtained as puppies from pet stores (n = 413) and breeder-obtained dogs (5,657). Behavioral evaluations were obtained from a large convenience sample of current dog owners with the online version of the Canine Behavioral Assessment and Research Questionnaire, which uses ordinal scales to rate either the intensity or frequency of the dogs' behavior. Hierarchic linear and logistic regression models were used to analyze the effects of source of acquisition on behavioral outcomes when various confounding and intervening variables were controlled for. Pet store-derived dogs received significantly less favorable scores than did breeder-obtained dogs on 12 of 14 of the behavioral variables measured; pet store dogs did not score more favorably than breeder dogs in any behavioral category. Compared with dogs obtained as puppies from noncommercial breeders, dogs obtained as puppies from pet stores had significantly greater aggression toward human family members, unfamiliar people, and other dogs; greater fear of other dogs and nonsocial stimuli; and greater separation-related problems and house soiling. Obtaining dogs from pet stores versus noncommercial breeders represented a significant risk factor for the development of a wide range of undesirable behavioral characteristics. Until the causes of the unfavorable differences detected in this group of dogs can be specifically identified and remedied, the authors cannot recommend that puppies be obtained from pet stores.

  12. Dynamical modelling, analysis and optimization of a floater blanket for the Ocean Grazer

    OpenAIRE

    Clemente Piñol, Sílvia

    2014-01-01

    The Ocean Grazer is a novel ocean energy collection and storage device, designed to extract and store multiple forms of ocean energy. This work aims to study and model the interaction between sea waves and the Ocean Grazer as well as to propose a model for its floater blanket. In this line, simulations are performed to gain an insight into the dynamical behaviour of the whole system and to find out the configuration of the controllable variable that enables to harvest the...

  13. Line blanketing without local thermodynamic equilibrium. II - A solar-type model in radiative equilibrium

    Science.gov (United States)

    Anderson, Lawrence S.

    1989-01-01

    A statistical solution for the problem of non-LTE radiative transfer in the millions of atomic transitions responsible for line blanketing is proposed which takes into account the influence of scattering on the atomic populations. A multifrequency/multigray algorithm is used to analyze the thermal equilibrium. Although CO is shown to cool the upper atmosphere to a boundary temperature of 2640 K, the molecule has little influence in the region of the solar temperature minimum.

  14. Preliminary electromagnetic analysis of Helium Cooled Solid Blanket for CFETR by MAXWELL

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Cheng; Chen, Hongli, E-mail: hlchen1@ustc.edu.cn

    2016-11-15

    Highlights: • A FEM model of the blanket and magnetic system was built. • Electromagnetic forces and moments of the typical blanket for ferromagnetic and non-ferromagnetic materials were computed and analyzed. • Maxwell forces and Lorentz forces were computed and compared. • Eddy current in the blanket was analyzed under MD condition. - Abstract: A Helium Cooled Solid Blanket (HCSB) for CFETR (Chinese Fusion Engineering Test Reactor) was designed by USTC. The structural and thermal-hydraulic analysis has been carried out, while electromagnetic analysis was not carefully researched. In this paper, a FEM (finite element method) model of the HCSB was developed and electromagnetic forces as well as moments was computed by a FEM software called MAXWELL integrated in ANSYS Workbench. In the geometrical model, flow channels and small connecting parts were neglected because of the extreme complication and the reasonable conservative assumption by neglecting these circumstantial details. As for electromagnetic (EM) analysis, Lorentz forces due to eddy currents caused by main disruption and Maxwell forces due to the magnetization of RAFM steel (i.e. EUROFER97) were computed. Since the unavailability of the details of the plasma in CFETR, when disruptions happen, the condition where a linear current quench of main disruption occurs was assumed. The maximum magnitude of the electromagnetic forces was 356.45 kN and the maximum value of the coupled electromagnetic moments was 1899.40 N m around the radial direction. It is feasible to couple electromagnetic analysis, structural analysis and thermal-hydraulic analysis in the future since MAXWELL has good channels to exchange data between different analytic parts.

  15. Space Photovoltaic Research and Technology 1983. High Efficiency, Radiation Damage, and Blanket Technology

    Science.gov (United States)

    1984-01-01

    This three day conference, sixth in a series that began in 1974, was held at the NASA Lewis Research Center on October 18-20, 1983. The conference provided a forum for the discussion of space photovoltaic systems, their research status, and program goals. Papers were presented and workshops were held in a variety of technology areas, including basic cell research, advanced blanket technology, and radiation damage.

  16. [Air conditioning units and warm air blankets in the operating room].

    Science.gov (United States)

    Kerwat, Klaus; Piechowiak, Karolin; Wulf, Hinnerk

    2013-01-01

    Nowadays almost all operating rooms are equipped with air conditioning (AC units). Their main purpose is climatization, like ventilation, moisturizing, cooling and also the warming of the room in large buildings. In operating rooms they have an additional function in the prevention of infections, especially the avoidance of postoperative wound infections. This is achieved by special filtration systems and by the creation of specific air currents. Since hypothermia is known to be an unambiguous factor for the development of postoperative wound infections, patients are often actively warmed intraoperatively using warm air blankets (forced-air warming units). In such cases it is frequently discussed whether such warm air blankets affect the performance of AC units by changing the air currents or whether, in contrast, have exactly the opposite effect. However, it has been demonstrated in numerous studies that warm air blankets do not have any relevant effect on the functioning of AC units. Also there are no indications that their use increases the rate of postoperative wound infections. By preventing the patient from experiencing hypothermia, the rate of postoperative wound infections can even be decreased thereby. © Georg Thieme Verlag Stuttgart · New York.

  17. Multirecycling of Plutonium from LMFBR Blanket in Standard PWRs Loaded with MOX Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Sonat Sen; Gilles Youinou

    2013-02-01

    It is now well-known that, from a physics standpoint, Pu, or even TRU (i.e. Pu+M.A.), originating from LEU fuel irradiated in PWRs can be multirecycled also in PWRs using MOX fuel. However, the degradation of the isotopic composition during irradiation necessitates using enriched U in conjunction with the MOX fuel either homogeneously or heterogeneously to maintain the Pu (or TRU) content at a level allowing safe operation of the reactor, i.e. below about 10%. The study is related to another possible utilization of the excess Pu produced in the blanket of a LMFBR, namely in a PWR(MOX). In this case the more Pu is bred in the LMFBR, the more PWR(MOX) it can sustain. The important difference between the Pu coming from the blanket of a LMFBR and that coming from a PWR(LEU) is its isotopic composition. The first one contains about 95% of fissile isotopes whereas the second one contains only about 65% of fissile isotopes. As it will be shown later, this difference allows the PWR fed by Pu from the LMFBR blanket to operate with natural U instead of enriched U when it is fed by Pu from PWR(LEU)

  18. Control of tritium in FFHR-2 self-cooled Flibe blanket

    Energy Technology Data Exchange (ETDEWEB)

    Fukada, Satoshi [Department of Applied Quantum Physics and Nuclear Engineering, Kyushu University, Hakozaki, Higashi-ku, Fukuoka 812-8581 (Japan)]. E-mail: sfukada@nucl.kyushu-u.ac.jp; Morisaki, Akio [Department of Applied Quantum Physics and Nuclear Engineering, Kyushu University, Hakozaki, Higashi-ku, Fukuoka 812-8581 (Japan); Sagara, Akio [Reactor Engineering Research Center, National Institute of Fusion Sciences, Oroshi-cho, Toki 509-5292 (Japan); Terai, Takayuki [Department of Nuclear Engineering and Management, University of Tokyo, Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan)

    2006-02-15

    The application of Flibe (2LiF + BeF{sub 2} mixed molten salt) to a blanket material of force-free helical reactor (FFHR-2) was discussed based on our recent experiments on redox control of Flibe by Be and on hydrogen permeation through Flinak (0.465LiF + 0.115NaF + 0.42 KF mixed molten salt) as a fluid simulant of Flibe. The two experimental works were carried out under the collaboration work of JUPITER-II. To maintain Flibe in the blanket loop under reduction condition is a key issue to transform TF to T{sub 2} with a fast reaction rate. In order to achieve that, proper rates of Be dissolution and reduction reaction of TF to T{sub 2} in Flibe have to be established in the self-cooled blanket. The overall material balance of tritium in the FFHR-2 system was discussed in terms of the tritium permeation through Flibe and the tritium recovery rate.

  19. Robot vision system R and D for ITER blanket remote-handling system

    Energy Technology Data Exchange (ETDEWEB)

    Maruyama, Takahito, E-mail: maruyama.takahito@jaea.go.jp [Japan Atomic Energy Agency, Fusion Research and Development Directorate, Naka, Ibaraki-ken 311-0193 (Japan); Aburadani, Atsushi; Takeda, Nobukazu; Kakudate, Satoshi; Nakahira, Masataka [Japan Atomic Energy Agency, Fusion Research and Development Directorate, Naka, Ibaraki-ken 311-0193 (Japan); Tesini, Alessandro [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul Lez Durance (France)

    2014-10-15

    For regular maintenance of the International Thermonuclear Experimental Reactor (ITER), a system called the ITER blanket remote-handling system is necessary to remotely handle the blanket modules because of the high levels of gamma radiation. Modules will be handled by robotic power manipulators and they must have a non-contact-sensing system for installing and grasping to avoid contact with other modules. A robot vision system that uses cameras was adopted for this non-contact-sensing system. Experiments for grasping modules were carried out in a dark room to simulate the environment inside the vacuum vessel and the robot vision system's measurement errors were studied. As a result, the accuracy of the manipulator's movements was within 2.01 mm and 0.31°, which satisfies the system requirements. Therefore, it was concluded that this robot vision system is suitable for the non-contact-sensing system of the ITER blanket remote-handling system.

  20. Thermal conductivity of aerogel blanket insulation under cryogenic-vacuum conditions in different gas environments

    Science.gov (United States)

    E Fesmire, J.; Ancipink, J. B.; Swanger, A. M.; White, S.; Yarbrough, D.

    2017-12-01

    Thermal conductivity of low-density materials in thermal insulation systems varies dramatically with the environment: cold vacuum pressure, residual gas composition, and boundary temperatures. Using a reference material of aerogel composite blanket (reinforcement fibers surrounded by silica aerogel), an experimental basis for the physical heat transmission model of aerogel composites and other low-density, porous materials is suggested. Cryogenic-vacuum testing between the boundary temperatures of 78 K and 293 K is performed using a one meter cylindrical, absolute heat flow calorimeter with an aerogel blanket specimen exposed to different gas environments of nitrogen, helium, argon, or CO2. Cold vacuum pressures include the full range from 1×10-5 torr to 760 torr. The soft vacuum region, from about 0.1 torr to 10 torr, is complex and difficult to model because all modes of heat transfer – solid conduction, radiation, gas conduction, and convection – are significant contributors to the total heat flow. Therefore, the soft vacuum tests are emphasized for both heat transfer analysis and practical thermal data. Results for the aerogel composite blanket are analyzed and compared to data for its component materials. With the new thermal conductivity data, future applications of aerogel-based insulation systems are also surveyed. These include Mars exploration and surface systems in the 5 torr CO2 environment, field joints for vacuum-jacketed cryogenic piping systems, common bulkhead panels for cryogenic tanks on space launch vehicles, and liquid hydrogen cryofuel systems with helium purged conduits or enclosures.

  1. Impact of Feeding Systems and Hatchery Vaccination Programs on Immune System Development, Salmonella Colonization, Clearance of E. Coli and Reproductive Traits In Broiler Breeder Pullets

    Science.gov (United States)

    Broiler breeder pullets from a single grandparent flock were vaccinated at 19 days of embryonation with Marek's vaccines HVT +SB1 or a Vector HVT + Infectious bursal disease (IBD) vaccine. The birds were placed in an experimental broiler breeder facility at the University of Georgia and fed ad libit...

  2. Sustainable breeding objectives and possible selection response: Finding the balance between economics and breeders' preferences.

    Science.gov (United States)

    Fuerst-Waltl, Birgit; Fuerst, Christian; Obritzhauser, Walter; Egger-Danner, Christa

    2016-12-01

    To optimize breeding objectives of Fleckvieh and Brown Swiss cattle, economic values were re-estimated using updated prices, costs, and population parameters. Subsequently, the expected selection responses for the total merit index (TMI) were calculated using previous and newly derived economic values. The responses were compared for alternative scenarios that consider breeders' preferences. A dairy herd with milk production, bull fattening, and rearing of replacement stock was modeled. The economic value of a trait was derived by calculating the difference in herd profit before and after genetic improvement. Economic values for each trait were derived while keeping all other traits constant. The traits considered were dairy, beef, and fitness traits, the latter including direct health traits. The calculation of the TMI and the expected selection responses was done using selection index methodology with estimated breeding values instead of phenotypic deviations. For the scenario representing the situation up to 2016, all traits included in the TMI were considered with their respective economic values before the update. Selection response was also calculated for newly derived economic values and some alternative scenarios, including the new trait vitality index (subindex comprising stillbirth and rearing losses). For Fleckvieh, the relative economic value for the trait groups milk, beef, and fitness were 38, 16, and 46%, respectively, up to 2016, and 39, 13, and 48%, respectively, for the newly derived economic values. Approximately the same selection response may be expected for the milk trait group, whereas the new weightings resulted in a substantially decreased response in beef traits. Within the fitness block, all traits, with the exception of fertility, showed a positive selection response. For Brown Swiss, the relative economic values for the main trait groups milk, beef, and fitness were 48, 5, and 47% before 2016, respectively, whereas for the newly derived

  3. Advanced Burner Reactor with Breed-and-Burn Thorium Blankets for Improved Economics and Resource Utilization

    Energy Technology Data Exchange (ETDEWEB)

    Greenspan, Ehud [Univ. of California, Berkeley, CA (United States)

    2015-11-04

    This study assesses the feasibility of designing Seed and Blanket (S&B) Sodium-cooled Fast Reactor (SFR) to generate a significant fraction of the core power from radial thorium fueled blankets that operate on the Breed-and-Burn (B&B) mode without exceeding the radiation damage constraint of presently verified cladding materials. The S&B core is designed to maximize the fraction of neutrons that radially leak from the seed (or “driver”) into the subcritical blanket and reduce neutron loss via axial leakage. The blanket in the S&B core makes beneficial use of the leaking neutrons for improved economics and resource utilization. A specific objective of this study is to maximize the fraction of core power that can be generated by the blanket without violating the thermal hydraulic and material constraints. Since the blanket fuel requires no reprocessing along with remote fuel fabrication, a larger fraction of power from the blanket will result in a smaller fuel recycling capacity and lower fuel cycle cost per unit of electricity generated. A unique synergism is found between a low conversion ratio (CR) seed and a B&B blanket fueled by thorium. Among several benefits, this synergism enables the very low leakage S&B cores to have small positive coolant voiding reactivity coefficient and large enough negative Doppler coefficient even when using inert matrix fuel for the seed. The benefits of this synergism are maximized when using an annular seed surrounded by an inner and outer thorium blankets. Among the high-performance S&B cores designed to benefit from this unique synergism are: (1) the ultra-long cycle core that features a cycle length of ~7 years; (2) the high-transmutation rate core where the seed fuel features a TRU CR of 0.0. Its TRU transmutation rate is comparable to that of the reference Advanced Burner Reactor (ABR) with CR of 0.5 and the thorium blanket can generate close to 60% of the core power; but requires only one sixth of the reprocessing and

  4. Analysis of trace levels of impurities and hydrogen isotopes in helium purge gas using gas chromatography for tritium extraction system of an Indian lead lithium ceramic breeder test blanket module.

    Science.gov (United States)

    Devi, V Gayathri; Sircar, Amit; Yadav, Deepak; Parmar, Jayraj

    2018-01-12

    In the fusion fuel cycle, the accurate analysis and understanding of the chemical composition of any gas mixture is of great importance for the efficient design of a tritium extraction and purification system or any tritium handling system. Methods like laser Raman spectroscopy and gas chromatography with thermal conductivity detector have been considered for hydrogen isotopes analyses in fuel cycles. Gas chromatography with a cryogenic separation column has been used for the analysis of hydrogen isotopes gas mixtures in general due to its high reliability and ease of operation. Hydrogen isotopes gas mixture analysis with cryogenic columns has been reported earlier using different column materials for percentage level composition. In the present work, trace levels of hydrogen isotopes (∼100 ppm of H 2 and D 2 ) have been analyzed with a Zeolite 5A and a modified γ-Al 2 O 3 column. Impurities in He gas (∼10 ppm of H 2 , O 2 , and N 2 ) have been analyzed using a Zeolite 13-X column. Gas chromatography with discharge ionization detection has been utilized for this purpose. The results of these experiments suggest that the columns developed were able to separate ppm levels of the desired components with a small response time (<6 min) and good resolution in both cases. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Post irradiation characterization of beryllium and beryllides after high temperature irradiation up to 3000 appm helium production in HIDOBE-01

    Energy Technology Data Exchange (ETDEWEB)

    Fedorov, A.V., E-mail: fedorov@nrg.eu [Nuclear Research and Consultancy Group, Westerduinweg 3, Postbus 25, Petten, 1755 ZG (Netherlands); Til, S. van; Stijkel, M.P. [Nuclear Research and Consultancy Group, Westerduinweg 3, Postbus 25, Petten, 1755 ZG (Netherlands); Nakamichi, M. [Japan Atomic Energy Agency, Rokkasho (Japan); Zmitko, M. [The European Joint Undertaking for ITER and the Development of Fusion Energy, c/ Josep Pla, n° 2, Torres Diagonal Litoral, Edificio B3, Barcelona 08019 (Spain)

    2016-01-15

    Titanium beryllides are considered as advanced candidate material for neutron multiplier for the helium cooled pebble bed (HCPB) and/or the water cooled ceramic breeder (WCCB) breeder blankets. In the HIDOBE-01 (HIgh DOse irradiation of BEryllium) experiment, beryllium and beryllide pellets with 5 at% and 7 at% Ti are irradiated at four different target temperatures (T{sub irr}): 425 °C, 525 °C, 650 °C and 750 °C up to the dose corresponding to 3000 appm He production in beryllium. The pellets were supplied by JAEA. During post irradiation examinations the critical properties of volumetric swelling and tritium retention were studied. Both titanium beryllide grades show significantly less swelling than the beryllium grade, with the difference increasing with the irradiation temperature. The irradiation induced swelling was studied by using direct dimensions. Both beryllide grades showed much less swelling as compare to the reference beryllium grade. Densities of the grades were studied by Archimedean immersion and by He-pycnometry, giving indications of porosity formation. While both beryllide grades show no significant reduction in density at all irradiation temperatures, the beryllium density falls steeply at higher T{sub irr}. Finally, the tritium release and retention were studied by temperature programmed desorption (TPD). Beryllium shows the same strong tritium retention as earlier observed in studies on beryllium pebbles, while the tritium inventory of the beryllides is significantly less, already at the lowest T{sub irr} of 425 °C.

  6. Effect of reproductive disorders and parity on repeat breeder status and culling of dairy cows in Quebec

    Science.gov (United States)

    Bonneville-Hébert, Ariane; Bouchard, Emile; Tremblay, Denis Du; Lefebvre, Réjean

    2011-01-01

    This study quantified the effect of peripartum reproductive disorders and parity on repeat breeder status and involuntary culling of dairy cows. Reproductive data of 418 383 lactations were taken from a computerized databank of health records for dairy cows. A logistic regression model was used with dystocia, retained placenta (RP), metritis complex, and parity as fixed effect risk factors and herd entered as the random effect. Of the peripartum problems studied, dystocia had the greatest effect on future fertility. Dystocia increased the odds of a cow being a repeat breeder by 44% [odds ratio (OR): 1.44; confidence interval (CI): 1.37 to 1.51]. Compared to first-parity cows, cows in second, third, and fourth parities had significantly higher odds of being a repeat breeder: 18% (OR: 1.18; CI: 1.16 to 1.20); 24% (OR: 1.24; CI: 1.21 to 1.26); and 42% (OR: 1.42; CI: 1.39 to 1.45), respectively. The odds for second-, third-, or fourth-parity repeat breeders being culled were 24% (OR: 1.24; CI: 1.20 to 1.28); 39% (OR: 1.39; CI: 1.35 to 1.43); and 67% (OR: 1.67; CI: 1.62 to 1.71) respectively, while peripartum reproductive problems had less of an effect. PMID:21731187

  7. Effects of breeder age, broiler strain, and eggshell temperature on development and physiological status of embryos and hatchlings

    NARCIS (Netherlands)

    Nangsuay, A.; Meijerhof, R.; Anker-Hensen, van den Ilona; Heetkamp, M.J.W.; Souza Morita, De V.; Kemp, B.; Brand, Van Den H.

    2016-01-01

    Breeder age and broiler strain can influence the availability of nutrients and oxygen, particularly through differences in yolk size and shell conductance. We hypothesized that these egg characteristics might affect embryonic responses to changes in eggshell temperature (EST). This study aimed to

  8. Seroepidemiological prevalence of brucellosis in livestock breeders of the central rural area of Bushehr province 2003-4

    Directory of Open Access Journals (Sweden)

    Katayoon Vahdat

    2006-09-01

    Full Text Available Background: Brucellosis is the most important zoonotic disease. As Brucellosis is endemic in Iran, this study was designed to evaluate seroepidemiological prevalence of brucellosis in livestock breeders of the central rural area of Bushehr province in 2003-2004. Methods: Sera of 397 livestock breeders from the central rural area of Bushehr province were collected and tested for anti-brucella IgG antibody using ELISA method. Results: The prevalence of brucellosis in livestock breeders was 10.8%. Brucella seropositively was found to have a significant association with sheep contact and abortion in domestic animals (p<0.05 but anti-brucella Ig antibody positivity had not a significant association with sex, age, contact with cattle, goats and camel, keeping livestock at home, consumption of milk products and raw milk, history of brucellosis in person and/or family and nonspecific signs such as fever, myalgia, low back pain and artheralgia. Conclusion: The prevalence of brucellosis is high in the central rural area of Bushehr province. The prevalence was much higher among livestock breeders in contact with sheep and also in those who had abortion in their domestic animals.

  9. The Effect of Dietary Supplementation of Prebiotic and Probiotic on Performance, Humoral Immunity Responses and Egg Hatchability in Broiler Breeders

    Directory of Open Access Journals (Sweden)

    Hajati H

    2014-01-01

    Full Text Available In this experiment, the influence of prebiotic and probiotic supplementation in the broiler breeder diets on body weight, mortality, feed intake, egg production, hatchability and humoral immunity response was investigated. A total number of 13140 female and 1260 male breeders (Cobb 500 with 26 wks of age were allocated to three treatments with six replicates (800 birds each replicate. Breeders were fed control basal diet, basal diet supplemented with prebiotic (mannan oligosaccharide or probiotic (Protexin® for 17 weeks. Body weight, feed intake and egg production were measured weekly during 26-40 wks of age. The hatchability of eggs was recorded on weeks 38, 39, and 40. Antibody production was recorded after 8 wks of prebiotic and probiotic supplementation. Prebiotic supplementation did not affect feed intake, the percentages of egg production and settable eggs percents. Prebiotic increased egg hatchability and reduced the percentages of infertile eggs, as well as dead embryo-in-shells. Antibody titers against influenza and reovirus were higher in prebiotic fed group, but there were no significant differences among the other blood antibody titers. Probiotic had no significant effect on the considered parameters. In conclusion, findings of present study showed that prebiotic improved egg hatchability and humoral immunity of broiler breeders.

  10. An express route to perfection: Ornamental plant breeders have the tools at their disposal to expedite breeding for specific traits

    Science.gov (United States)

    Plants inherit traits the same way Gregor Mendel observed in his famous experiments with peas in the 1800s. Breeders select parents with one or more desirable traits and then look for superior combinations of these traits in their offspring. Seedlings must be rigorously evaluated for the desirable...

  11. The use of a genetic-counselling program by Dutch breeders for four hereditary health problems in boxer dogs

    NARCIS (Netherlands)

    Hagen, van M.A.E.; Janss, L.L.G.; Broeck, van den J.; Knol, B.W.

    2004-01-01

    Our group developed a genetic-counselling program for boxer-dog breeders in The Netherlands, using data for cryptorchidism (uni- and/or bilateral), epilepsy, knee-problems (including ligament rupture, fractured or ruptured meniscus, severe osteo-arthrosis of the knee, or a combination of these

  12. Strategic promiscuity helps avoid inbreeding at multiple levels in a cooperative breeder where both sexes are philopatric

    NARCIS (Netherlands)

    Brouwer, Lyanne; van de Pol, Martijn; Atema, Els; Cockburn, Andrew

    2011-01-01

    In cooperative breeders, the tension between the opposing forces of kin selection and kin competition is at its most severe. Although philopatry facilitates kin selection, it also increases the risk of inbreeding. When dispersal is limited, extra-pair paternity might be an important mechanism to

  13. Optimum site for in ovo amino acid injection in broiler breeder eggs.

    Science.gov (United States)

    Ohta, Y; Kidd, M T

    2001-10-01

    Three experiments were conducted to evaluate the effect of differences in in ovo amino acid (AA) injection sites in broiler breeder eggs on subsequent hatchability and BW of chicks. In Experiment 1, an AA solution was injected into eggs with 13-mm or 19-mm, 27-ga needles. Uninjected eggs served as controls. Hatchability was decreased (P coelom in eggs treated by both needles. However, the occurrence of India ink in the extra embryonic coelom was higher (P coelom, or amniotic cavity at Day 7 of incubation. Hatchability was reduced, but chicks hatched when eggs were windowed and when AA were injected into the yolk sac or extra-embryonic coelom. However, chicks did not hatch when AA were administered to the chorioallantoic membrane or into the amniotic cavity. These results suggest that the best AA injection sites in ovo may be the yolk and extra-embryonic coelom.

  14. Sex-biased dispersal at different geographical scales in a cooperative breeder from fragmented rainforest.

    Directory of Open Access Journals (Sweden)

    Carl Vangestel

    Full Text Available Dispersal affects both social behavior and population structure and is therefore a key determinant of long-term population persistence. However, dispersal strategies and responses to spatial habitat alteration may differ between sexes. Here we analyzed spatial and temporal variation in ten polymorphic microsatellite DNA loci of male and female Cabanis's greenbuls (Phyllastrephuscabanisi, a cooperative breeder of Afrotropical rainforest, to quantify rates of gene flow and fine-grained genetic structuring within and among fragmented populations. We found genetic evidence for female-biased dispersal at small spatial scales, but not at the landscape level. Local autocorrelation analysis provided evidence of positive genetic structure within 300 m distance ranges, which is consistent with behavioral observations of short-distance natal dispersal. At a landscape scale, individual-based autocorrelation values decreased over time while levels of admixture increased, possibly indicating increased gene flow over the past decade.

  15. The development of an ECR charge breeder for KEK-JAERI joint RNB project

    CERN Document Server

    Jeong, S C; Tojyo, E; Kawakami, H; Ishiyama, H; Miyatake, H; Enomoto, K; Watanabe, Y; Katayama, I; Nomura, T; Matsuda, M; Osa, A; Ichikawa, S

    2003-01-01

    For the construction of an electron cyclotron resonance (ECR) charge breeder (CB) at KEK-JAERI radioactive nuclear beam facility, we have made a pilot charge breeding system consisting of two compact-sized ECR ion sources. In order to find the necessary conditions for an ECRCB with high efficiency, the charge breeding efficiency for Ar ions in nitrogen plasma has been measured and compared with the results from the simulation of the trajectories of the ions in the plasma. By explicitly taking into account the cumulative small angle scattering of charged ions as well as the confinement magnetic field of the pilot CB, the simulation predicts the stopping efficiency. This is defined as a probability that the injected ions are still within the plasma volume when their initial directional motions have become randomized. Incorporating the ionization efficiency for the ions, the overall breeding efficiency has been estimated. Finally, the characteristics of the ECRCB recently installed for tests at KEK is described.

  16. Longitudinal study of transmission of Escherichia coli from broiler breeders to broilers

    DEFF Research Database (Denmark)

    Poulsen, Louise Ladefoged; Thoefner, Ida; Bisgaard, Magne

    2017-01-01

    Escherichia coli is of major importance in industrial broiler production as the main cause of salpingitis and peritonitis in broiler breeders. Furthermore E. coli is the most common cause of first week mortality in broiler chickens. The aim of the present study was to investigate the transmission...... hatched chickens from each flock were swabbed in the cloaca on four occasions (parent age 30, 40, 50, 60 weeks) and E. coli was isolated. Causes of first week mortality were determined pathologically and bacteriologically. E. coli isolates from parents, newly hatched chickens and first week mortality were...... chickens. PFGE of E. coli showed identical band patterns in isolates from the three different sources indicating a transmission of E. coli from parent birds to chickens. In conclusion, E. coli isolated from salpingitis in broiler parents were found to be transmitted to broilers in which some sequence types...

  17. Thermochemical comparison of the effectiveness of protium purging of fusion breeders

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, A.K.; Johnson, C.E.

    1985-07-01

    The tritium breeders for a fusion reactor, Li/sub 2/0, LiAl0/sub 2/, and Li/sub 4/Si0/sub 4/, are compared on a thermochemical basis in respect to their response to protium purging. Two oxygen activity levels, established by H/sub 2/O:H/sub 2/ ratios of 100: 1 and 1:100 are considered at the temperatures 900 and 1300K. In terms of tritium release (all gaseous forms), LiAl0/sub 2/ is better than Li/sub 2/0 and this in turn better than Li/sub 4/Si0/sub 4/. At 900K, Li/sub 2/0 and LiA10/sub 2/ release more tritium than at 1300K. Li/sub 4/Si0/sub 4/ releases more tritium at 1300K than at 900K.

  18. Thermochemical comparison of the effectiveness of protium purging of fusion breeders

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, A.K.; Johnson, C.E.

    1985-01-01

    The tritium breeders for a fusion reactor, Li/sub 2/O, LiAlO/sub 2/, and Li/sub 4/SiO/sub 4/, are compared on a thermochemical basis in respect to their response to protium purging. Two oxygen activity levels, established by H/sub 2/O:H/sub 2/ ratios of 100:1 and 1:100 are considered at the temperatures 900 and 1300K. In terms of tritium release (all gaseous forms). LiAlO/sub 2/ is better than Li/sub 2/O and this in turn better than Li/sub 4/SiO/sub 4/. At 900K, Li/sub 2/O and LiAlO/sub 2/ release more tritium than at 1300K. Li/sub 4/SiO/sub 4/ releases more tritium at 1300K than at 900K.

  19. Compendium of computer codes for the safety analysis of fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    1977-10-01

    The objective of the compendium is to provide the reader with a guide which briefly describes many of the computer codes used for liquid metal fast breeder reactor safety analyses, since it is for this system that most of the codes have been developed. The compendium is designed to address the following frequently asked questions from individuals in licensing and research and development activities: (1) What does the code do. (2) To what safety problems has it been applied. (3) What are the code's limitations. (4) What is being done to remove these limitations. (5) How does the code compare with experimental observations and other code predictions. (6) What reference documents are available.

  20. Clinch River Breeder Reactor Plant Steam Generator Few Tube Test model post-test examination

    Energy Technology Data Exchange (ETDEWEB)

    Impellezzeri, J.R.; Camaret, T.L.; Friske, W.H.

    1981-03-11

    The Steam Generator Few Tube Test (FTT) was part of an extensive testing program carried out in support of the Clinch River Breeder Reactor Plant (CRBRP) steam generator design. The testing of full-length seven-tube evaporator and three-tube superheater models of the CRBRP design was conducted to provide steady-state thermal/hydraulic performance data to full power per tube and to verify the absence of multi-year endurance problems. This paper describes the problems encountered with the mechanical features of the FTT model design which led to premature test termination, and the results of the post-test examination. Conditions of tube bowing and significant tube and tube support gouging was observed. An interpretation of the visual and metallurgical observations is also presented. The CRBRP steam generator has undergone design evaluations to resolve observed deficiences found in the FFTM.

  1. Severe pododermatitis in broiler breeder hens housed on pressure-treated slats.

    Science.gov (United States)

    Sander, J E; Wilson, J L; Bush, P B; Rowland, G N

    1994-01-01

    Severe foot-pad dermatitis was diagnosed in a case of broiler hens housed on slats made of lumber pressure-treated with chromated copper arsenate. Studies were conducted in an attempt to determine whether contact with the lumber caused the lesions. Breeder pullets were housed for 17 weeks on slats made from either untreated oak or pressure-treated lumber. Cresylic acid disinfectant was applied to one set of each slat type. Foot-pad lesions were scored and tissue arsenic levels were measured. Foot pads of the hens on pressure-treated slats were the only tissue with detectable arsenic levels. All groups developed foot-pad lesions, although the lesions appeared to be most severe, and to have developed earlier, in birds on pressure-treated disinfected slats.

  2. Review of ORNL-TSF shielding experiments for the gas-cooled Fast Breeder Reactor Program

    Energy Technology Data Exchange (ETDEWEB)

    Abbott, L.S.; Ingersoll, D.T.; Muckenthaler, F.J.; Slater, C.O.

    1982-01-01

    During the period between 1975 and 1980 a series of experiments was performed at the ORNL Tower Shielding Facility in support of the shield design for a 300-MW(e) Gas Cooled Fast Breeder Demonstration Plant. This report reviews the experiments and calculations, which included studies of: (1) neutron streaming in the helium coolant passageways in the GCFR core; (2) the effectiveness of the shield designed to protect the reactor grid plate from radiation damage; (3) the adequacy of the radial shield in protecting the PCRV (prestressed concrete reactor vessel) from radiation damage; (4) neutron streaming between abutting sections of the radial shield; and (5) the effectiveness of the exit shield in reducing the neutron fluxes in the upper plenum region of the reactor.

  3. Steam condenser optimization using Real-parameter Genetic Algorithm for Prototype Fast Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Jayalal, M.L., E-mail: jayalal@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Kumar, L. Satish, E-mail: satish@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Jehadeesan, R., E-mail: jeha@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Rajeswari, S., E-mail: raj@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Satya Murty, S.A.V., E-mail: satya@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Balasubramaniyan, V.; Chetal, S.C. [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India)

    2011-10-15

    Highlights: > We model design optimization of a vital reactor component using Genetic Algorithm. > Real-parameter Genetic Algorithm is used for steam condenser optimization study. > Comparison analysis done with various Genetic Algorithm related mechanisms. > The results obtained are validated with the reference study results. - Abstract: This work explores the use of Real-parameter Genetic Algorithm and analyses its performance in the steam condenser (or Circulating Water System) optimization study of a 500 MW fast breeder nuclear reactor. Choice of optimum design parameters for condenser for a power plant from among a large number of technically viable combination is a complex task. This is primarily due to the conflicting nature of the economic implications of the different system parameters for maximizing the capitalized profit. In order to find the optimum design parameters a Real-parameter Genetic Algorithm model is developed and applied. The results obtained are validated with the reference study results.

  4. Effects of high fibre diets on gut fill, behaviour and productivity in broiler breeders

    DEFF Research Database (Denmark)

    Steenfeldt, Sanna; Nielsen, Birte Lindstrøm

    2011-01-01

    diets compared to feed A was detectable in the intestinal contents, with high fibre feed staying longer in the digestive system. Birds fed fibre diets displayed more dustbathing and less stereotypic behaviour. Egg production did not differ between the diet treatments. The onset of lay was delayed......, but the hens reached maximum lay sooner than industry guidelines indicates. The results show that high fibre diets prolong the passage of feed and reduce stereotypic behaviour, indicating an improvement in the well-being of the birds, who may experience less hunger than commercially fed broiler breeders. Key...... at 19 weeks. From 19-30 weeks all groups were fed the same commercial pre-layer and layer diets. Similar growth rates were obtained on different quantities of food (eg. 75, 100, 110 and 92 g feed/bird/d in week 16 for A, B, C and D, respectively). The higher amounts of food offered on the high fibre...

  5. Acoustic monitoring of sodium boiling in a liquid metal fast breeder reactor from autoregressive models

    Energy Technology Data Exchange (ETDEWEB)

    Geraldo, Issa Cherif [Laboratoire d’Automatique, Génie Informatique et Signal (LAGIS UMR CNRS 8219), Université Lille 1, Sciences et technologies, Avenue Paul Langevin, BP 48, 59651 Villeneuve d’Ascq CEDEX (France); Bose, Tanmoy [Indian Institute of Technology Kharagpur, Kharagpur 721302, West Bengal (India); Pekpe, Komi Midzodzi, E-mail: midzodzi.pekpe@univ-lille1.fr [Laboratoire d’Automatique, Génie Informatique et Signal (LAGIS UMR CNRS 8219), Université Lille 1, Sciences et technologies, Avenue Paul Langevin, BP 48, 59651 Villeneuve d’Ascq CEDEX (France); Cassar, Jean-Philippe [Laboratoire d’Automatique, Génie Informatique et Signal (LAGIS UMR CNRS 8219), Université Lille 1, Sciences et technologies, Avenue Paul Langevin, BP 48, 59651 Villeneuve d’Ascq CEDEX (France); Mohanty, A.R. [Indian Institute of Technology Kharagpur, Kharagpur 721302, West Bengal (India); Paumel, Kévin [CEA, DEN, Nuclear Technology Department, F-13108 Saint-Paul-lez-Durance (France)

    2014-10-15

    Highlights: • The work deals with sodium boiling detection in a liquid metal fast breeder reactor. • The authors choose to use acoustic data instead of thermal data. • The method is designed to not to be disturbed by the environment noises. • A real time boiling detection methods are proposed in the paper. - Abstract: This paper deals with acoustic monitoring of sodium boiling in a liquid metal fast breeder reactor (LMFBR) based on auto regressive (AR) models which have low computational complexities. Some authors have used AR models for sodium boiling or sodium–water reaction detection. These works are based on the characterization of the difference between fault free condition and current functioning of the system. However, even in absence of faults, it is possible to observe a change in the AR models due to the change of operating mode of the LMFBR. This sets up the delicate problem of how to distinguish a change in operating mode in absence of faults and a change due to presence of faults. In this paper we propose a new approach for boiling detection based on the estimation of AR models on sliding windows. Afterwards, classification of the models into boiling or non-boiling models is made by comparing their coefficients by two statistical methods, multiple linear regression (LR) and support vectors machines (SVM). The proposed approach takes into account operating mode information in order to avoid false alarms. Experimental data include non-boiling background noise data collected from Phenix power plant (France) and provided by the CEA (Commissariat à l’Energie Atomique et aux énergies alternatives, France) and boiling condition data generated in laboratory. High boiling detection rates as well as low false alarms rates obtained on these experimental data show that the proposed method is efficient for boiling detection. Most importantly, it shows that the boiling phenomenon introduces a disturbance into the AR models that can be clearly detected.

  6. Ecological, evolutionary and social constraints on reproductive effort: are hoary marmots really biennial breeders?

    Science.gov (United States)

    Patil, Vijay P; Karels, Timothy J; Hik, David S

    2015-01-01

    Biennial breeding is a rare life-history trait observed in animal species living in harsh, unproductive environments. This reproductive pattern is thought to occur in 10 of 14 species in the genus Marmota, making marmots useful model organisms for studying its ecological and evolutionary implications. Biennial breeding in marmots has been described as an obligate pattern which evolved as a mechanism to mitigate the energetic costs of reproduction (Evolved Constraint hypothesis). However, recent anecdotal evidence suggests that it is a facultative pattern controlled by annual variation in climate and food availability (Environmental Constraint hypothesis). Finally, in social animals like marmots, biennial breeding could result from reproductive competition between females within social groups (Social Constraint hypothesis). We evaluated these three hypotheses using mark-recapture data from an 8-year study of hoary marmot (Marmota caligata) population dynamics in the Yukon. Annual variation in breeding probability was modeled using multi-state mark-recapture models, while other reproductive life-history traits were modeled with generalized linear mixed models. Hoary marmots were neither obligate nor facultative biennial breeders, and breeding probability was insensitive to evolved, environmental, or social factors. However, newly mature females were significantly less likely to breed than older individuals. Annual breeding did not result in increased mortality. Female survival and, to a lesser extent, average fecundity were correlated with winter climate, as indexed by the Pacific Decadal Oscillation. Hoary marmots are less conservative breeders than previously believed, and the evidence for biennial breeding throughout Marmota, and in other arctic/alpine/antarctic animals, should be re-examined. Prediction of future population dynamics requires an accurate understanding of life history strategies, and of how life history traits allow animals to cope with changes in

  7. Ecological, evolutionary and social constraints on reproductive effort: are hoary marmots really biennial breeders?

    Directory of Open Access Journals (Sweden)

    Vijay P Patil

    Full Text Available Biennial breeding is a rare life-history trait observed in animal species living in harsh, unproductive environments. This reproductive pattern is thought to occur in 10 of 14 species in the genus Marmota, making marmots useful model organisms for studying its ecological and evolutionary implications. Biennial breeding in marmots has been described as an obligate pattern which evolved as a mechanism to mitigate the energetic costs of reproduction (Evolved Constraint hypothesis. However, recent anecdotal evidence suggests that it is a facultative pattern controlled by annual variation in climate and food availability (Environmental Constraint hypothesis. Finally, in social animals like marmots, biennial breeding could result from reproductive competition between females within social groups (Social Constraint hypothesis. We evaluated these three hypotheses using mark-recapture data from an 8-year study of hoary marmot (Marmota caligata population dynamics in the Yukon. Annual variation in breeding probability was modeled using multi-state mark-recapture models, while other reproductive life-history traits were modeled with generalized linear mixed models. Hoary marmots were neither obligate nor facultative biennial breeders, and breeding probability was insensitive to evolved, environmental, or social factors. However, newly mature females were significantly less likely to breed than older individuals. Annual breeding did not result in increased mortality. Female survival and, to a lesser extent, average fecundity were correlated with winter climate, as indexed by the Pacific Decadal Oscillation. Hoary marmots are less conservative breeders than previously believed, and the evidence for biennial breeding throughout Marmota, and in other arctic/alpine/antarctic animals, should be re-examined. Prediction of future population dynamics requires an accurate understanding of life history strategies, and of how life history traits allow animals to cope

  8. Is there peripheral or ovarian insulin action alteration in broiler breeder hens fed ad libitum?

    Science.gov (United States)

    Métayer, S; Tesseraud, S; Cassy, S; Taouis, M; Williams, J; Picard, M; Rideau, N

    2006-06-01

    We investigated whether a change in peripheral glucose homeostasis, a local change in the insulin-related ovarian regulatory system, or both occurred in ad libitum-fed broiler breeder hens compared with feed-restricted counterparts. Feed-restricted (R, from 5 to 16 wk of age) and ad libitum-fed (A) hens from a standard commercial line (S) and an experimental dwarf genotype (E) were studied. Basal and stimulated plasma insulin and glucose concentrations were measured during the prebreeding and laying periods. In the basal state (after 16 h fasting) plasma glucose concentrations were significantly lower in SA chickens (-5% at 17 wk, -7.5% at 32 wk) compared with EA, SR, and ER chickens, with no difference in plasma insulin concentrations (n = 16). In 17-wk-old SA birds, 30 min after oral glucose loading, plasma glucose concentrations increased significantly compared with the basal state and were also significantly lower as compared with SR but did not differ significantly from EA and ER. Plasma insulin concentrations did not differ significantly between genotypes or regimens (n = 16). A potential modification of intracellular mediators involved in the regulation of cell growth and survival in small follicles that were overrecruited in SA compared with SR was also investigated in SA and SR hens at 32 wk. There was no effect of food restriction in phospho-Akt, Akt, phospho-ERK, and phospho-S6 in the small white ovarian follicles (n = 6) in the basal state and after 30 min of refeeding. In conclusion, the present study does not demonstrate any evidence of glucose intolerance during the prebreeding period, specific change in the ovarian small follicle insulin signalling pathway, or both, in laying broiler breeders fed ad libitum compared with feed-restricted hens.

  9. Structural and performance costs of reproduction in a pure capital breeder, the Children's python Antaresia childreni.

    Science.gov (United States)

    Lourdais, Olivier; Lorioux, Sophie; DeNardo, Dale F

    2013-01-01

    Females often manage the high energy demands associated with reproduction by accumulating and storing energy in the form of fat before initiating their reproductive effort. However, fat stores cannot satisfy all reproductive resource demands, which include considerable investment of amino acids (e.g., for the production of yolk proteins or gluconeogenesis). Because capital breeders generally do not eat during reproduction, these amino acids must come from internal resources, typically muscle proteins. Although the energetic costs of reproduction have been fairly well studied, there are limited data on structural and performance costs associated with the muscle degradation required to meet amino acid demands. Thus, we examined structural changes (epaxial muscle width) and performance costs (constriction and strength) over the course of reproduction in a pure capital breeder, the children's python (Antaresia childreni). We found that both egg production (i.e., direct resource allocation) and maternal care (egg brooding) induce muscle catabolism and affect performance of the female. Although epaxial muscle loss was minimal in nonreproductive females, it reached up to 22% (in females after oviposition) and 34% (in females after brooding) of initial muscle width. Interestingly, we found that individuals with higher initial muscular condition allocated more of their muscle into reproduction. The amount of muscle loss was significantly linked to clutch mass, underscoring the role of structural protein in egg production. Egg brooding significantly increased proteolysis and epaxial loss despite no direct allocation to the offspring. Muscle loss was linked to a significant reduction in performance in postreproductive females. Overall, these results demonstrate that capital-breeding females experience dramatic costs that consume structural resources and jeopardize performance.

  10. Optimization of material and production to develop fluoroelastomer inflatable seals for sodium cooled fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, N.K., E-mail: nksinha@igcar.gov.i [Indira Gandhi Centre for Atomic Research (IGCAR), Department of Atomic Energy (DAE), Kalpakkam, Tamilnadu 603102 (India); Raj, Baldev, E-mail: dir@igcar.gov.i [Indira Gandhi Centre for Atomic Research (IGCAR), Department of Atomic Energy (DAE), Kalpakkam, Tamilnadu 603102 (India)

    2011-03-15

    Research highlights: Production of thin fluoroelastomer profiles by cold feed extrusion and continuous cure involving microwave and hot air heating. Use of peroxide curing in air during production. Use of fluoroelastomers based on advanced polymer architecture (APA) for the production of profiles. Use of the profiles in inflatable seals for critical application of Prototype Fast Breeder Reactor. Tailoring of material formulation by synchronized optimization of material and production technologies to ensure that the produced seal ensures significant gains in terms of performance and safety in reactor under synergistic influences of temperature, radiation, air and sodium aerosol. - Abstract: The feasibility of producing thin-walled fluoroelastomer profiles under continuous, atmospheric-pressure vulcanization conditions in air has been demonstrated by successful manufacture of {approx}2 m diameter test inflatable seals for the 500 MWe, Prototype Fast Breeder Reactor (PFBR) using a 50/50 blend formulation of Viton GBL-200S/600S based on advanced polymer architecture (APA). A commercial cold feed screw extruder with 90 mm diameter screw was used along with continuous cure by microwave (2.45 GHz) and hot air heating (190 {sup o}C) at a line speed of 1 m/min to produce the seals. The blend formulation promises significant improvement in the performance and safety of the seals. This article depicts the relevant characteristics of the original inflatable seal compound that was used as reference to achieve the objectives through synchronized optimization of material and production technologies. The production trials are outlined and the blend formulation used with minor factory modifications to produce the test seals is reported. Progressive refinements of the original, Viton A-401C based compound to the blend formulation is presented along with an assessment of potential performance gains. Possible uses of the reported formulation and production technique for other large

  11. Context dependency of baseline glucocorticoids as indicators of individual quality in a capital breeder.

    Science.gov (United States)

    Jaatinen, Kim; Seltmann, Martin W; Hollmén, Tuula; Atkinson, Shannon; Mashburn, Kendall; Öst, Markus

    2013-09-15

    Identifying markers of individual quality is a central goal of life-history theory and conservation biology. The 'corticosterone (CORT)-fitness hypothesis' postulates that low fitness signals impaired ability to cope with the environment, resulting in elevated baseline CORT levels. CORT can, however, be negatively, positively or neutrally related to fitness, depending on the context. In order to clarify this controversial issue, we elucidate the utility of using baseline CORT as a correlate of individual fitness in incubating female eiders across variable environments. An increase in serum CORT with decreasing body condition was evident in older, more experienced breeders, while increased clutch mass was associated with elevated serum CORT in females breeding late in the season. For faecal CORT, the expected negative association with body condition was observed only in early breeders. We found a strong increase in faecal CORT with increasing baseline body temperature, indicating the utility of body temperature as a complementary stress indicator. Females in good body condition had a lower baseline body temperature, but this effect was only observed on open islands, a harsher breeding habitat less buffered against weather variability. Females with higher reproductive investment also maintained a lower baseline body temperature. Nest success strongly decreased with increasing serum and faecal CORT concentrations, and individual stress hormone and body temperature profiles were repeatable over years. Although our data support the tenet that baseline CORT is negatively related to fitness, the complex context-dependent effects call for cautious interpretation of relationships between stress physiology and phenotypic quality. Copyright © 2013 Elsevier Inc. All rights reserved.

  12. Effect of sesame seeds on blood physiological and biochemmical parameters in broiler breeder hens

    Directory of Open Access Journals (Sweden)

    S. Y. Abdul-Rahman

    2009-01-01

    Full Text Available The study was carried out to investigate the effect of employing sesame seeds in broiler breeder diet on some physiological parameters. 30 Cobb breeder hens (36 week age were divided into 3 groups (10 hens each. The 1st group was reared on standard ration (control, the 2nd group was reared on standard ration and given orally Sesame seeds capsules daily (250 mg /kg and the 3rd group was reared on standard ration and given orally Sesame seeds capsules daily (500 mg/kg. The treatment continues for 4 weeks period. Results showed a significant increase in the RBCs, Hb and PCV in the 2nd and 3rd group compared with the control group. This was accompanied by a significant decrease in MCV and MCH. Significant increase in the MCHC in the 3rd group compared with other groups after 2 and 4 weeks of treatment was noticed. Sesame seeds treatments for 4 weeks also caused a significant increase in the WBC count in the 2nd and 3rd group as compared with control. Hormonal Assay revealed that sesame seeds treatment with tow doses has no effects on plasma levels of LH hormone (4.94 and 4.48 miu/ml compared with control (3.93 miu / ml, but the sesame seeds treatment (500 mg/kg causes a significant increase in plasma levels of FSH (0.88 miu / ml compared with the control (0.64 miu/ ml. Sesame seeds treatment, also, increased the egg weight, shell weight and yolk weight and it reached the levels of significantly in the 3rd group (66.15, 7.33 and 20.65 g respectively as compared with control (61.48, 6.86 and 18.66 g, respectively. It is concluded that, sesame seeds treatment enhanced erythropoiesis, FSH activity and some productive parameters.

  13. An axially multilayered low void worth liquid-metal fast breeder reactor core concept

    Energy Technology Data Exchange (ETDEWEB)

    Kamei, T.; Yamaoka, M. (Toshiba Corp., Nuclear Engineering Lab., 4-1 Ukishima-cho, Kawasaki-ku, Kawasaki-shi 210 (JP))

    1992-03-01

    A new core concept with a negative sodium void reactivity coefficient has evolved. The core is composed of two core layers in the axial direction. The core layers are separated by an internal blanket, the central region of which comprises a neutron-absorbing material such as boron carbide or tantalum. Consequently, the two core layers are completely decoupled as regards neutronics, leading to an effective increase in neutron leakage from the core region when sodium is voided. This design is expected to be free from the disadvantages of a large core radius, as seen in a conventional spoiled core such as a pancake core. In this paper the design is described in detail, and its application to a 300-MW (electronic) metal fuel core and to a 450-MW (electric) minor actinide burned core is given as an example.

  14. Effects of breeder age, broiler strain, and eggshell temperature on development and physiological status of embryos and hatchlings.

    Science.gov (United States)

    Nangsuay, A; Meijerhof, R; van den Anker, I; Heetkamp, M J W; Morita, V De Souza; Kemp, B; van den Brand, H

    2016-07-01

    Breeder age and broiler strain can influence the availability of nutrients and oxygen, particularly through differences in yolk size and shell conductance. We hypothesized that these egg characteristics might affect embryonic responses to changes in eggshell temperature (EST). This study aimed to investigate the effect of breeder age, broiler strain, and EST on development and physiological status of embryos. A study was designed as a 2 × 2 × 2 factorial arrangement using 4 batches of 1,116 hatching eggs of 2 flock ages at 29 to 30 wk (young) and 54 to 55 wk (old) of Ross 308 and Cobb 500. EST of 37.8 (normal) or 38.9°C (high) was applied from incubation d 7 (E7) until hatching. The results showed that breeder age rather than broiler strain had an influence on yolk size (P = 0.043). The shell conductance was higher in Ross 308 than in Cobb 500 (P Cobb 500 eggs yielded embryos with a lower YFBM at E14, E18, and 3 h after hatch (all P < 0.05) than Ross 308 eggs. Breeder age had no effect on YFBM, but the RSY weight was higher in embryos from the old flock compared to the young flock embryos at E14 and E16 (both P < 0.05). A 3-way interaction among breeder age, strain, and EST was found, especially for incubation duration, navel quality, and relative heart and stomach weights at 3 h after hatch (all P < 0.05). Based on the results obtained, we conclude that oxygen availability rather than nutrient availability determines embryonic development, and the egg characteristics affected embryonic responses to changes of EST, especially for variables related to chick quality. © 2016 Poultry Science Association Inc.

  15. Melatonin receptors MT1 and MT2 are expressed in spermatozoa from several seasonal and nonseasonal breeder species.

    Science.gov (United States)

    González-Arto, Marta; Vicente-Carrillo, Alejandro; Martínez-Pastor, Felipe; Fernández-Alegre, Estela; Roca, Jordi; Miró, Jordi; Rigau, Teresa; Rodríguez-Gil, Joan E; Pérez-Pé, Rosaura; Muiño-Blanco, Teresa; Cebrián-Pérez, José A; Casao, Adriana

    2016-11-01

    Melatonin is a ubiquitous and multipurpose molecule, and one of its roles is to regulate reproduction in some seasonal mammals. Our group has previously reported the variation in the melatonin levels in ram seminal plasma along the year and identified MT1 and MT2 receptors in ram spermatozoa. The objective of this study was to elucidate whether the presence of melatonin receptors (MT1 and MT2) in the sperm plasma membrane, and melatonin in the seminal plasma is related to seasonal breeding. For this purpose, the presence of melatonin receptors and the levels of melatonin in seminal plasma have been examined in several species: donkey and stallion as long-day breeders; red deer as a wild, short-day, highly seasonal breeder (epididymal spermatozoa); bull as a conventional nonseasonal breeder; boar as a seasonal breeder under management techniques; and dog as possible a seasonal breeder not regulated by melatonin. We have detected measurable levels of melatonin in the seminal plasma of all ejaculated semen samples (from donkey, stallion, boar, bull, and dog). Also, and for the first time, we have demonstrated the presence of MT1 and MT2 melatonin receptors in the spermatozoa of all these species, regardless their type of reproduction or sperm source (ejaculated or epididymal), using indirect immunofluorescence techniques and Western blotting. Our findings suggest that melatonin and melatonin receptors may be universally distributed in the reproductive system of mammals and that the sperm melatonin receptors cells may not be necessarily related with seasonal reproduction. Furthermore, the presence of MT1 at the cytoplasmic droplet in immature ejaculated stallion spermatozoa found in one sample and epididymal red deer spermatozoa suggests that melatonin may be involved in specific functions during spermatogenesis and sperm maturation, like protecting spermatozoa from oxidative damage, this activity being mediated through these receptors. Copyright © 2016 Elsevier Inc

  16. Effect of litter quality on foot pad dermatitis, hock burns and breast blisters in broiler breeders during the production period.

    Science.gov (United States)

    Kaukonen, Eija; Norring, Marianna; Valros, Anna

    2016-12-01

    Foot pad dermatitis and hock burn lesions are a form of contact dermatitis, a condition affecting skin areas in contact with unsuitable or irritating material. Contact dermatitis is a common problem, reducing the welfare of broilers, and is believed to also affect broiler breeders. However, there is very little research on contact dermatitis in breeders. This study followed the severity of foot pad lesions in broiler breeders throughout the production period. At slaughter the presence of hock burns and breast blisters was also determined. In addition, changes in litter condition over time and the impact of litter quality on foot pads were evaluated. The study was performed on 10 broiler breeder farms, including altogether 18 flocks. Foot pads of 100 hens per flock were assessed at the end of rearing period, three times during the production period, and at slaughter. Foot pad and hock lesions, as well as litter condition were scored on a 5-point scale. Litter quality was evaluated as pH, moisture and ammonia content. The condition of foot pads deteriorated towards slaughter age, with the occurrence of severe lesions reaching a maximum of 64% on average at slaughter. Hock lesions and breast blisters were rare. The litter layer became drier over time. Although poorer litter condition and wetness influenced foot pad health negatively, the effect on severe lesions was not significant. We also observed a negative effect on foot pad condition of larger slat areas. In conclusion, maintaining good litter quality alone is not enough to ensure healthy foot pads in broiler breeders.

  17. Thermomechanical characterization of joints for blanket and divertor application processed by electrochemical plating

    Energy Technology Data Exchange (ETDEWEB)

    Krauss, Wolfgang; Lorenz, Julia; Konys, Jürgen; Basuki, Widodo; Aktaa, Jarir

    2016-11-01

    Highlights: • Electroplating is a relevant technology for brazing of blanket and divertor parts. • Tungsten, Eurofer and steel joints successfully fabricated. • Reactive interlayers improve adherence and reduce failure risks. • Qualification of joints performed by thermo-mechanical testing and aging. • Shear strength of joints comparable with conventionally brazing of steels. - Abstract: Fusion technology requires in the fields of first wall and divertor development reliable and adjusted joining processes of plasma facing tungsten to heat sinks or blanket structures. The components to be bonded will be fabricated from tungsten, steel or other alloys like copper. The parts have to be joined under functional and structural aspects considering the metallurgical interactions of alloys to be assembled and the filler materials. Application of conventional brazing showed lacks ranging from bad wetting of tungsten up to embrittlement of fillers and brazing zones. Thus, the deposition of reactive interlayers and filler components, e.g. Ni, Pd or Cu was initiated to overcome these metallurgical restrictions and to fabricate joints with aligned mechanical behavior. This paper presents results concerning the joining of tungsten, Eurofer and stainless steel for blanket and divertor application by applying electroplating technology. Metallurgical and mechanical characterization by shear testing were performed to analyze the joints quality and application limits in dependence on testing temperature between room temperature and 873 K and after thermal aging of up to 2000 h. The tested interlayers Ni and Pd enhanced wetting and enabled the processing of reliable joints with a shear strength of more than 200 MPa at RT.

  18. Electromagnetic analysis of the Korean helium cooled ceramic reflector test blanket module set

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Youngmin, E-mail: ymlee@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Ku, Duck Young [National Fusion Research Institute, Daejeon (Korea, Republic of); Lee, Dong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Ahn, Mu-Young; Park, Yi-Hyun; Cho, Seungyon [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2016-11-01

    Korean helium cooled ceramic reflector (HCCR) test blanket module set (TBM-set) will be installed at equatorial port #18 of Vacuum Vessel in ITER in order to test the breeding blanket performance for forthcoming fusion power plant. Since ITER tokamak has a set of electromagnetic coils (Central Solenoid, Poloidal Field and Toroidal Field coil set) around Vacuum Vessel, the HCCR TBM-set, the TBM and associated shield, is greatly influenced by magnetic field generated by these coils. In the case of fast transient electromagnetic events such as major disruption, vertical displacement event or magnet fast discharge, magnetic field and induced eddy current results in huge electromagnetic load, known as Lorentz load, on the HCCR TBM-set. In addition, the TBM-set experiences electromagnetic load due to magnetization of the structural material not only during the fast transient events but also during normal operation since the HCCR TBM adopts Reduced Activation Ferritic Martensitic (RAFM) steel as a structural material. This is known as Maxwell load which includes Lorentz load as well as load due to magnetization of structure material. This paper presents electromagnetic analysis results for the HCCR TBM-set. For analysis, a 20° sector finite model was constructed considering ITER configuration such as Vacuum Vessel, ITER shield blankets, Central Solenoid, Poloidal Field, Toroidal Field coil set as well as the HCCR TBM-set. Three major disruptions (operational event, likely event and highly unlikely event) were selected for analysis based on the load specifications. ANSYS-EMAG was used as a calculation tool. The results of EM analysis will be used as input data for the structural analysis.

  19. Mechanical behavior of Be–Ti pebbles at blanket relevant temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Kurinskiy, Petr, E-mail: petr.kurinskiy@kit.edu [Karlsruhe Institute of Technology, Institute for Applied Materials—Applied Materials Physics (IAM-AWP), P.O. Box 3640, 76021 Karlsruhe (Germany); Rolli, Rolf [Karlsruhe Institute of Technology, Institute for Applied Materials—Materials Biomechanics (IAM-WBM), P.O. Box 3640, 76021 Karlsruhe (Germany); Kim, Jae-Hwan; Nakamichi, Masaru [Breeding Functional Materials Development Group, Department of Blanket Fusion Institute, Rokkasho Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency, 2-166 Oaza-Obuchi-Aza-Omotedate, Rokkasho-mura, Kamikita-gun, Aoori 039-3212 (Japan)

    2016-11-01

    Highlights: • Mechanical behavior of two kinds of Be–Ti pebbles in the temperature range of 400–800 °C was investigated. • It was experimentally shown that Be-7 at.%Ti pebbles have the enhanced ductile properties compared to Be-7.7 at.%Ti pebbles. • Brittle failure of both kinds of Be–Ti pebbles was observed by testing at 400 °C using the constant loading with 150 N. - Abstract: Mechanical performance of beryllium-based materials is a matter of a great interest from the point of view of their use as neutron multipliers of the tritium breeding blankets. The compression strains which can occur in beryllium pebble beds under blanket working conditions will lead to deformation or even failure of individual pebbles [1,2] (Reimann et al. 2002; Ishitsuka and Kawamura, 1995). Mechanical behavior of Be–Ti pebbles having chemical contents of Be-7.0 at.% Ti and Be-7.7 at.%Ti was investigated in the temperature range of 400–800 °C. Constant loads varying from 10 up to 150 N were applied uniaxially. It was shown that Be–Ti pebbles compared to pure beryllium pebbles possess much lower ductility, although their strength properties exceed corresponding characteristics of pure beryllium. Also, the influence of titanium content on mechanical behavior of Be–Ti pebbles was investigated. Specific features of deformation of pure beryllium and Be–Ti pebbles having different titanium contents at blanket operation temperatures are discussed.

  20. Magnetohydrodynamic investigations of a self-cooled Pb-17Li blanket with poloidal-radial-toroidal ducts

    Energy Technology Data Exchange (ETDEWEB)

    Reimann, J. [Association KfK-EURATOM, Kernforschungszentrum Karlsruhe, IATF, Postfach 3640, D-76021 Karlsruhe (Germany); Barleon, L. [Association KfK-EURATOM, Kernforschungszentrum Karlsruhe, IATF, Postfach 3640, D-76021 Karlsruhe (Germany); Bucenieks, I. [Latvian Academy of Sciences, IP Salaspils 1, 229021 Riga (Latvia); Buehler, L. [Association KfK-EURATOM, Kernforschungszentrum Karlsruhe, IATF, Postfach 3640, D-76021 Karlsruhe (Germany); Lenhart, L. [Association KfK-EURATOM, Kernforschungszentrum Karlsruhe, IATF, Postfach 3640, D-76021 Karlsruhe (Germany); Malang, S. [Association KfK-EURATOM, Kernforschungszentrum Karlsruhe, IATF, Postfach 3640, D-76021 Karlsruhe (Germany); Molokov, S. [Association KfK-EURATOM, Kernforschungszentrum Karlsruhe, IATF, Postfach 3640, D-76021 Karlsruhe (Germany); Platnieks, I. [Latvian Academy of Sciences, IP Salaspils 1, 229021 Riga (Latvia); Stieglitz, R. [Association KfK-EURATOM, Kernforschungszentrum Karlsruhe, IATF, Postfach 3640, D-76021 Karlsruhe (Germany)

    1995-03-01

    For self-cooled liquid metal blankets, the magnetohydrodynamic (MHD) pressure drop and velocity distributions are considered as critical issues. This paper summarizes MHD work performed for a DEMO-related Pb-17Li blanket, where the coolant flows downwards in rear poloidal ducts; turned around by 180 at the blanket bottom; is diverted from poloidal ducts into short radial channels which feed to toroidal First wall coolant ducts; flows through the subsequent radial channels; is collected again in poloidal channels and leaves the blanket segment at the blanket top. To reduce the pressure drop and to decouple electrically parallel channels, flow channel inserts are used for all the ducts except the first wall ducts. A previous pressure drop assessment resulted in significant values for duct geometries with flow distribution or collection, and multichannel effects for the system of U-bends. As a result of the uncertainty of these assessments, corresponding investigations were carried out recently. Characteristic results are presented in this paper. It is shown that, for both geometries, the pressure drops are considerably lower than those previously assessed. First results from experiments on the velocity distribution in a radial-toroidal-radial U-bend are also presented. Here, it is shown that, with an increasing interaction parameter, the liquid preferentially flows close to the First wall. Additionally, a pair of strong vortices was observed in a toroidal duct. Both effects are supposed very favourable for heat transfer. (orig.).

  1. MHD work related to a self-cooled Pb-17Li blanket with poloidal-radial-toroidal ducts

    Energy Technology Data Exchange (ETDEWEB)

    Reimann, J.; Barleon, L.; Buehler, L. [IATF, Karlsruhe (Germany)] [and others

    1994-12-31

    For self cooled liquid metal blankets MHD pressure drop and velocity distributions are considered as critical issues. This paper summarizes MHD work performed for a DEMO-relevant Pb-17Li blanket which uses essential characteristics of a previous ANL design: The coolant flows downwards in the rear poloidal ducts, turns by 180{degrees} at the blanket bottom and is distributed from the ascending poloidal ducts into short radial channels which feed the toroidal First Wall coolant ducts (aligned with the main magnetic field direction). The flow through the subsequent radial channels is collected again in poloidal channels and the coolant leaves the blanket segment at the top. The blanket design is based on the use of flow channel inserts (FCIs) (which means electrically thin conducting walls for MHD) for all ducts except for the toroidal FW coolant channels. MHD related issues were defined and estimations of corresponding pressure drops were performed. Previous experimental work included a proof of principle of FCIs and a detailed experiment with a single {open_quotes}poloidal{sm_bullet}toroidal{sm_bullet}poloidal{close_quotes} duct (cooperation with ANL). In parallel, a numerical code based on the Core Flow Approximation (CFA) was developed to predict pressure drop and velocity distributions for arbitrary single duct geometries.

  2. Energy and mass distributions of impact ejecta blankets on the moon and Mercury

    Science.gov (United States)

    Ahrens, T. J.; Okeefe, J. D.

    1978-01-01

    The paper applies previously calculated impact-induced flow fields (O'Keefe and Ahrens, 1977) resulting from interaction of 5-cm radius gabbroic anorthosite impactor with a half-space of the same material, at various velocities, to obtain mass and energy ejecta distributions. Whereas earlier results described the ejecta distribution from a 15 km/s impact of an iron object on the moon in terms of mass vs. distance, the present results describe, at a given distance from the impact, the energy content as a function of depth, i.e., the thermal structure of ejecta blankets. Pertinent computational methods are included, and several tables and plots supplement the text.

  3. Current status of final design and R&D for ITER blanket shield blocks in Korea

    Science.gov (United States)

    Ha, M. S.; Kim, S. W.; Jung, H. C.; Hwang, H. S.; Heo, Y. G.; Kim, D. H.; Ahn, H. J.; Lee, H. G.; Jung, K. J.

    2015-07-01

    The main function of the ITER blanket shield block (SB) is to provide nuclear shielding and support the first wall (FW) panel. It needs to accommodate all the components located on the vacuum vessel (in particular the in-vessel coils, blanket manifolds and the diagnostics). The conceptual, preliminary and final design reviews have been completed in the framework of the Blanket Integrated Product Team. The Korean Domestic Agency has successfully completed not only the final design activities, including thermo-hydraulic and thermo-mechanical analyses for SBs #2, #6, #8 and #16, but also the SB full scale prototype (FSP) pre-qualification program prior to issuing of the procurement agreement. SBs #2 and #6 are located at the in-board region of the tokamak. The pressure drop was less than 0.3 MPa and fully satisfied the design criteria. The thermo-mechanical stresses were also allowable even though the peak stresses occurred at nearby radial slit end holes, and their fatigue lives were evaluated over many more than 30 000 cycles. SB #8 is one of the most difficult modules to design, since this module will endure severe thermal loading not only from nuclear heating but also from plasma heat flux at uncovered regions by the FW. In order to resolve this design issue, the neutral beam shine-through module concept was applied to the FW uncovered region and it has been successfully verified as a possible design solution. SB #16 is located at the out-board central region of the tokamak. This module is under much higher nuclear loading than other modules and is covered by an enhanced heat flux FW panel. In the early design stage, many cooling headers on the front region were inserted to mitigate peak stresses near the access hole and radial slit end hole. However, the cooling headers on the front region needed to be removed in order to reduce the risk from cover welding during manufacturing. A few cooling headers now remain after efforts through several iterations to remove

  4. Historical peat loss explains limited short-term response of drained blanket bogs to rewetting.

    Science.gov (United States)

    Williamson, Jennifer; Rowe, Edwin; Reed, David; Ruffino, Lucia; Jones, Peter; Dolan, Rachel; Buckingham, Helen; Norris, David; Astbury, Shaun; Evans, Chris D

    2017-03-01

    This study assessed the short-term impacts of ditch blocking on water table depth and vegetation community structure in a historically drained blanket bog. A chronosequence approach was used to compare vegetation near ditches blocked 5 years, 4 years and 1 year prior to the study with vegetation near unblocked ditches. Plots adjacent to and 3 m away from 70 ditches within an area of blanket bog were assessed for floristic composition, aeration depth using steel bars, and topography using LiDAR data. No changes in aeration depth or vegetation parameters were detected as a function of ditch-blocking, time since blocking, or distance from the ditch, with the exception of non-Sphagnum bryophytes which had lower cover in quadrats adjacent to ditches that had been blocked for 5 years. Analysis of LiDAR data and the observed proximity of the water table to the peat surface led us to conclude that the subdued ecosystem responses to ditch-blocking were the result of historical peat subsidence within a 4-5 m zone either side of each ditch, which had effectively lowered the peat surface to the new, ditch-influenced water table. We estimate that this process led to the loss of around 500,000 m3 peat within the 38 km2 study area following drainage, due to a combination of oxidation and compaction. Assuming that 50% of the volume loss was due to oxidation, this amounts to a carbon loss of 11,000 Mg C over this area, i.e. 3 Mg C ha-1. The apparent 'self-rewetting' of blanket bogs in the decades following drainage has implications for their restoration as it suggests that there may not be large quantities of dry peat left to rewet, and that there is a risk of inundation (potentially leading to high methane emissions) along subsided ditch lines. Many peatland processes are likely to be maintained in drained blanket bog, including support of typical peatland vegetation, but infilling of lost peat and recovery of original C stocks are likely to take longer than is generally

  5. Oxide fuel element and blanket element development programs. Quarterly progress report, April-June 1978

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    Approval-in-principle has been granted for run beyond breach experiment XY-2, which will incorporate an F11A series rod. Fuel microstructures and operating parameters have been tabulated for 118 specimens from the F20 power to melt experiment. Retained gas measurements have been compiled indicating 36-50 ..mu..l/gm in this high power fuel. Topical report GEFR-00367 was prepared describing F20 results. Preparation of the Test Design Description for axial blanket experiment AB-1 is proceeding on schedule (for Cycle 2 irradiation). The safety analysis calculations, showing no fuel melting nor sodium boiling in design-basis upsets, have been completed.

  6. Thermal-hydraulic analysis of a cylindrical blanket module using ATHENA code

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, J.G.; Herring, J.S.; Carlson, K.E.; Ransom, V.H.

    1981-01-01

    ATHENA (Advanced Thermal-Hydraulic Energy Network Analyzer) is a new computer code for thermal-hydraulic analyses of many energy systems. Multiple-loop and multiple-fluid capabilities have been emphasized during the code development. A pilot version of ATHENA has incorporated a fusion kinetic package to model the effect of first wall temperature variation on the reactor conditions. The capability has been demonstrated by analyzing the performance under various conditions of a cylindrical fusion blanket module. The results have shown the viability of using ATHENA for fusion reactor design and safety analyses.

  7. Extracellular Polymers in Granular Sludge from Different Upflow Anaerobic Sludge Blanket (UASB) Reactors

    DEFF Research Database (Denmark)

    Schmidt, Jens Ejbye; Ahring, Birgitte Kiær

    1994-01-01

    lysis. ECP contents of 41 to 92 mg · g−1 volatile suspended solids of granules were found depending on the type of granular sludge examined. The content of polysaccharides, protein and lipids in the extracted ECP was quantified. Furthermore, the different methyl esters of the lipids were determined...... of an upflow anaerobic sludge blanket reactor from a sugar-containing waste-water to a synthetic waste-water containing acetate, propionate and butyrate resulted in a decrease in both the protein and polysaccharide content and an increase in the lipid content of the extracellular material. Furthermore...

  8. Molecule-surface interaction processes of relevance to gas blanket type fusion device divertor design

    Energy Technology Data Exchange (ETDEWEB)

    Snowdon, K.J. [Newcastle Univ. (United Kingdom). Dept. of Physics; Tawara, H.

    1997-01-01

    The mechanisms which may lead to the departure of molecular species from surfaces exposed to low energy (0.1-100 eV) particle or photon and electron irradiation are reviewed. Where possible, the charge and electronic state, angular, translational and internal energy distributions of the departing molecules are described and the physical origin of the nature of those distributions identified. The consequences, for the departing molecules, of certain material choices become apparent from such an analysis. Such information may help guide the choice of appropriate materials for plasma facing components of gas-blanket type divertors such as that recently proposed for the International Thermonuclear Experimental Reactor (ITER). (author). 71 refs.

  9. Establishment of design and fabrication technology and domestic qualification for ITER blanket system

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Bong Guen; In, S. R.; Bae, Y. D. (and others)

    2006-02-15

    To obtain and analyze the detailed design and manufacturing technology of the blanket system for each components, the related data are collected through the various sources. And also, design processes and results of the FWs, shield blocks, and TBMs are investigated. From these analysis of the blanket R and D status of each party, we develop the KO R and D plan and it is used in the selection of manufacturing method and the materials. For the ITA16-10 subtask1, we had the official agreement with ITER IT in December 2004 for the qualification of the FW panel fabrication methods and to establish the NDT methods for the FW panel. From the technical reports we published, we compare the manufacturing methods and the proposed material for each component according to the parties. Be is proposed as a plasma facing material and most parties have interest in S-65C. Cu alloy is proposed as a heat sink material and DSCu or CuCrZr are investigated now. For the structural material, stainless steel such as SS316L(N) is investigated internationally. HIP and brazing are proposed as the manufacturing methods. In order to establish the blanket system technology, design contents of shield block by ITER IT and other parties were investigated through participating the international workshop and meeting, dispatching the researcher to the ITER IT or other parties to collect the drafting and 3D modeling files. The modification items of blanket design were investigated and a researcher was dispatched in the ITER IT and participated in the analysis on cooling problem in shield block such as front header and drilled manifold. To investigate the development status of TBM, we participated the 14th TBWG meeting and proposed the KO HCSB and HCML as candidates. And also, we obtain the R and D results of other parties and make document about the R and D status of other parties for the TBM. Finally, we establish the KO TBM R and D plan and proposed it to ITER IT and other parties. In which, the

  10. Uranium Fission Track Integrator for Measurement of Energy Production in the Subcritical Uranium Blanket of Electronuclear Assembly

    CERN Document Server

    Chultem, D; Krivopustov, M I

    2001-01-01

    Using nuclear track detectors in the uranium blanket of electronuclear assembly partial fission integrals have been measured. The merit of this method lies in the fact that uranium fission integrals are determined in every points of measurement as well as in whole volume of blanket. In addition, not only measurement of neutron spectra \\Phi(E_n) but also without going into details of excitation functions: \\sigma_f^5(E_n) and \\sigma_f^8(E_n) in wide range of energies, without recourse to group averaged cross sections are not required. The method was tested in the experiment on uranium blanket of electronuclear assembly "Energy plus transmutation" calorimetry at 1.5 GeV beam from synchrophasotron (JINR).

  11. Travel Blankets

    Science.gov (United States)

    Coy, Mary

    2009-01-01

    Spry Middle School's annual eighth-grade trip to Washington, District of Columbia, coincided with the opening of the National Museum of the American Indian. The museum, with its distinctive curvilinear architecture covered in Kasota limestone, stands as a wonderful testament to the rich culture and history of the many and diverse Native American…

  12. Analyses of Hubble Space Telescope Aluminized-Teflon Multilayer Insulation Blankets Retrieved After 19 Years of Space Exposure

    Science.gov (United States)

    de Groh, Kim K.; Perry, Bruce A.; Mohammed, Jelila S.; Banks, Bruce

    2015-01-01

    Since its launch in April 1990, the Hubble Space Telescope (HST) has made many important observations from its vantage point in low Earth orbit (LEO). However, as seen during five servicing missions, the outer layer of multilayer insulation (MLI) has become increasingly embrittled and has cracked in many areas. In May 2009, during the 5th servicing mission (called SM4), two MLI blankets were replaced with new insulation and the space-exposed MLI blankets were retrieved for degradation analyses by teams at NASA Glenn Research Center (GRC) and NASA Goddard Space Flight Center (GSFC). The retrieved MLI blankets were from Equipment Bay 8, which received direct sunlight, and Equipment Bay 5, which received grazing sunlight. Each blanket was divided into several regions based on environmental exposure and/or physical appearance. The aluminized-Teflon (DuPont, Wilmington, DE) fluorinated ethylene propylene (Al-FEP) outer layers of the retrieved MLI blankets have been analyzed for changes in optical, physical, and mechanical properties, along with chemical and morphological changes. Pristine and as-retrieved samples (materials) were heat treated to help understand degradation mechanisms. When compared to pristine material, the analyses have shown how the Al-FEP was severely affected by the space environment. Most notably, the Al-FEP was highly embrittled, fracturing like glass at strains of 1 to 8 percent. Across all measured properties, more significant degradation was observed for Bay 8 material as compared to Bay 5 material. This paper reviews the tensile and bend-test properties, density, thickness, solar absorptance, thermal emittance, x-ray photoelectron spectroscopy (XPS) and energy dispersive spectroscopy (EDS) elemental composition measurements, surface and crack morphologies, and atomic oxygen erosion yields of the Al-FEP outer layer of the retrieved HST blankets after 19 years of space exposure.

  13. Enhancing the growth performance of replacement female breeder goats through modification of feeding program

    Directory of Open Access Journals (Sweden)

    A. A. A. Ghani

    2017-06-01

    Full Text Available Aim: The study was conducted at a smallholder goat farm located in Labu, Negeri Sembilan, Malaysia. The objective of this study was to evaluate the effect of proper feeding program on growth performances of replacement breeder goats. Materials and Methods: A total of 30 healthy female boer cross goats at the age of 4 months old with average initial live body weight (BW of 20.05±0.5 kg were used for on-farm feeding trial to evaluate the growth performance as preparation for breeding purposes. The experimental goats were divided into two groups of 15 animals each labeled as control and treatment groups, which were kept under intensive farming system. Goats in control group were fed with normal routine feeding protocol practiced by the farmer, while goats in the treatment group were fed with new feed formulation. Throughout the experimental period, on-farm monitoring and data collection were carried out. Initial BW and body condition score (BCS were recorded before the start of the experiment while final BW and BCS were gained after 7 months of the experimental period. Average daily gain (ADG was calculated after the experiment end. Data on BW, ADG, and BCS were recorded from both groups for every 2 weeks and reported monthly. The feed intake for the control group was 2.8 kg/animal/day which practiced by the farmer and 3.2 kg/animal/day as new feed formulation for the treatment group. Results: After 7 months of the experimental period, final BW shows an improvement in treatment group (39.1±1.53 kg compared with control group (32.3±1.23 kg. The ADG in treatment group also gives promising result when comparing with control group. Goats in treatment group significantly attained better ADG than control group which were 126.7 g/day and 83.3 g/day, respectively. For the BCS, goats in the treatment group had shown an improvement where 86.67% (13 out of 15 of the group had BCS =3 (1-5 scoring scale and only 66.67% (10 out of 15 of the control group had

  14. Hypothermia Prevention During Surgery: Comparison Between Thermal Mattress And Thermal Blanket

    Directory of Open Access Journals (Sweden)

    Ariane Marques Moysés

    2014-04-01

    Full Text Available This study aimed to compare the efficiency of the thermal blanket and thermal mattress in the prevention of hypothermia during surgery. Thirty-eight randomized patients were divided into two groups (G1 – thermal blanket and G2 - thermal mattress. The variables studied were: length of surgery, length of stay in the post-anesthetic care unit, period without using the device after thermal induction, transport time from the operating room to post-anesthetic care unit, intraoperative fluid infusion, surgery size, anesthetic technique, age, body mass index, esophageal, axillary and operating room temperature. In G2, length of surgery and starch infusion longer was higher (both p=0.03, but no hypothermia occurred. During the surgical anesthetic procedure, the axillary temperature was higher at 120 minutes (p=0.04, and esophageal temperature was higher at 120 (p=0.002 and 180 minutes (p=0.03 and at the end of the procedure (p=0.002. The thermal mattress was more effective in preventing hypothermia during surgery.

  15. Application Effect’s Research of Vetiver Eco Blanket in Pubugou Reservoir Fluctuating Zone

    Directory of Open Access Journals (Sweden)

    Lan Huijuan

    2015-01-01

    Full Text Available To solve the ecological disasters in Pubugou Reservoir Fluctuating Zone, ecological blanket governance model is proposed in this paper, which may provide good early environment for plants’ survival in fluctuation zone, and then play the function of greening and sustainable development to ensure the slopes’ stability. Meanwhile, based on the result of vetiver ecological blanket in Hanyuan experimental zone, we find that three kinds of typical Fluctuating Zone slope’s greening effect is good, which includes the dirt piling up slope, the whole lump of rock slope and the gravel piling up slope, and it gets an average coverage of 90.3 % as well as good strength. Due to the different geological conditions, the ecological blankets’ governance effect differs from slope to slope. Using analytic hierarchy process to calculate the weight, we get the dirt piling up slope, the whole lump of rock slope and the gravel piling up slope’s weights are 0.41, 0.17, 0.42, respectively, namely, the dirt piling up slope and the gravel piling up slope have good results overall, followed by the whole lump of rock slope.

  16. Experimental and numerical study of the pressure drop for ITER blanket shield block

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Min-Su; Kim, Sawoong; Jung, Hun-Chea; Shim, Hee-Jin; Ahn, Hee-Jae

    2016-11-01

    Highlights: • The results of the experiment and the numerical analysis are compared. • The numerical analysis results are lower than the experimental results. • The margin of the pressure drop is suggested. - Abstract: The blanket shield block (SB) is located inside the ITER vacuum chamber, and the main function is to provide the thermal and nuclear shielding to the vacuum vessel and external components. The SB is foreseen to undergo a significant heat load which is a body load throughout the whole thickness of the SB under normal operation conditions. Therefore, the cooling configuration in SB should be designed very carefully based on the various experiences. The pressure drop in the cooling design is one of the most important factors to balance a water distribution of overall blanket cooling system. In order to verify the pressure drop characteristic and validate the design methodology of SB, experiment and numerical analysis are performed and compared their results. These results would be a benchmarking of the numerical results with experimental results to assess the gap between calculations and experiments.

  17. Development of radiation hard components for ITER blanket remote handling system

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Makiko, E-mail: saito.makiko@jaea.go.jp; Anzai, Katsunori; Maruyama, Takahito; Noguchi, Yuto; Ueno, Kenichi; Takeda, Nobukazu; Kakudate, Satoshi

    2016-11-01

    Highlights: • Clarify the components that will degrade by gamma ray irradiation. • Perform the irradiation tests to BRHS components. • Optimize the materials to increase the radiation hardness. - Abstract: The ITER blanket remote handling system (BRHS) will be operated in a high radiation environment (250 Gy/h max.) and must stably handle the blanket modules, which weigh 4.5 t and are more than 1.5 m in length, with a high degree of position and posture accuracy. The reliability of the system can be improved by reviewing the failure events of the system caused by high radiation. A failure mode and effects analysis (FMEA) identified failure modes and determined that lubricants, O-rings, and electric insulation cables were the dominant components affecting radiation hardness. Accordingly, we tried to optimize the lubricants and cables of the AC servo motors by using polyphenyl ether (PPE)-based grease and polyether ether ketone (PEEK), respectively. Materials containing radiation protective agents were also selected for the cable sheaths and O-rings to improve radiation hardness. Gamma ray irradiation tests were performed on these components and as a result, a radiation hardness of 8 MGy was achieved for the AC servo motors. On the other hand, to develop the radiation hardness and BRHS compatibility furthermore, the improvement of materials of cable and O ring were performed.

  18. The neutronic analysis of opportunity of ITER blanket element tests in RF research reactors

    Energy Technology Data Exchange (ETDEWEB)

    Lopatkin, A.; Tocheniy, L. [ENTEK-RDIPE, Moscow (Russian Federation)

    1994-12-31

    In the framework of development of plan of in-pile radiative tests of ITER blanket elements the calculations are carried out of the models of tritium-producing elements in loop channels, placed in the number of Russian various type test reactors. There are presented: (1) The variants of models of blanket, on the base of which the set of experiment goal parameters and its ranges are formed; (2) Outline of loop channel; (3) The experimental opportunities of research reactors with thermal (SM-3, MIR, IVV-2M, RBT) and fast (BOR-60, EBR) spectra of neutrons; (4) The calculation procedures - settlement models, codes. The results are given: (1) power generation rates in components of channel; (2) the tritium breeding rate; (3) the helium production rate in beryllium; (4) the neutron group fluxes; (5) absorption rates in zones of loop channel. The possible reactivity effects due to experimental channel accommodation in reactor core and to radiated sample replace inside of the channel are shown. The last section includes the recommendations for the choice of reactor acceptable from the neutronics point of view, and for the next study directions and stages.

  19. Improvement of Core Performance by Introduction of Moderators in a Blanket Region of Fast Reactors

    Directory of Open Access Journals (Sweden)

    Toshio Wakabayashi

    2013-01-01

    Full Text Available An application of deuteride moderator for fast reactor cores is proposed for power flattening that can mitigate thermal spikes and alleviate the decrease in breeding ratio, which sometimes occurs when hydrogen moderator is applied as a moderator. Zirconium deuteride is employed in a form of pin arrays at the inner most rows of radial blanket fuel assemblies, which works as a reflector in order to flatten the radial power distribution in the outer core region of MONJU. The power flattening can be utilized to increase core average burn-up by increasing operational time. The core characteristics have been evaluated with a continuous-energy model Monte Carlo code MVP and the JENDL-3.3 cross-section library. The result indicates that the discharged fuel burn-up can be increased by about 7% relative to that of no moderator in the blanket region due to the power flattening when the number of deuteride moderator pins is 61. The core characteristics and core safety such as void reactivity, Doppler coefficient, and reactivity insertion that occurred at dissolution of deuteron were evaluated. It was clear that the serious drawback did not appear from the viewpoints of the core characteristics and core safety.

  20. Tritium and heat management in ITER Test Blanket Systems port cell for maintenance operations

    Energy Technology Data Exchange (ETDEWEB)

    Giancarli, L.M., E-mail: luciano.giancarli@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Cortes, P.; Iseli, M.; Lepetit, L.; Levesy, B. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Livingston, D. [Frazer-Nash Consultancy Ltd., Stonebridge House, Dorking Business Park, Dorking, Surrey RH4 1HJ (United Kingdom); Nevière, J.C. [Comex-Nucleaire, 13115 Saint Paul Lez Durance (France); Pascal, R. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Ricapito, I. [Fusion for Energy, Josep Pla, 2, Torres Diagonal Litoral B3, Barcelona E-08019 (Spain); Shu, W. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Wyse, S. [Frazer-Nash Consultancy Ltd., Stonebridge House, Dorking Business Park, Dorking, Surrey RH4 1HJ (United Kingdom)

    2014-10-15

    Highlights: •The ITER TBM Program is one of the ITER missions. •We model a TBM port cell with CFD to optimize the design choices. •The heat and tritium releases management in TBM port cells has been optimized. •It is possible to reduce the T-concentration below one DAC in TBM port cells. •The TBM port cells can have human access within 12 h after shutdown. -- Abstract: Three ITER equatorial port cells are dedicated to the assessment of six different designs of breeding blankets, known as Test Blanket Modules (TBMs). Several high temperature components and pipework will be present in each TBM port cell and will release a significant quantity of heat that has to be extracted in order to avoid the ambient air and concrete wall temperatures to exceed allowable limits. Moreover, from these components and pipes, a fraction of the contained tritium permeates and/or leaks into the port cell. This paper describes the optimization of the heat extraction management during operation, and the tritium concentration control required for entry into the port cell to proceed with the required maintenance operations after the plasma shutdown.

  1. The feasibility study I on the blanket fuel options for the ATW/HYPER

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Woan; Lee, Byoung Oon; Lee, Bong Sang; Park, Won Seok; Meyer, M.K; Hayes, S.L

    2001-01-01

    The choice of a blanket fuel cycle technology and the fuel type for HYPER/ATW are important to develop an ADS with better economics, performance and safety. Even though several fuel types have been considered as an alternative of the blanket fuels for HYPER/ATW, the metal alloy and the dispersion fuels were selected as the candidate fuels for ADS, and the technical feasibilities for both fuels are evaluated in this report. General performance characteristics, fabrication abilities, technical aspects, safety aspects, economics, and non-proliferation aspects for each fuel type are reviewed and evaluated. And some technological problems are addressed in this report, focused on the development strategy, the roadmaps, and the flexibility to meet the missions and specific designs. This study has been performed at the first stage of conceptual design. Since it is under the lack of physical properties for each fuel material, no an attempt is made to select the best fuel option, but the more better fuel options are recommended.

  2. Soft blanket gravure printing technology for finely patterned conductive layers on three-dimensional or curved surfaces

    Science.gov (United States)

    Izumi, Konami; Yoshida, Yasunori; Tokito, Shizuo

    2017-05-01

    In this paper, we report on a newly developed printing method called the “soft blanket gravure” (SBG) printing method, which is based on a conventional gravure offset printing method but unlike it, SBG printing uses a very soft and thick offset blanket. SBG printing onto various curved, nonplanar surfaces as well as on planar surfaces using silver ink was successfully demonstrated by optimizing printing conditions such as printing pressure and printing speed. Finely printed conductive silver lines with a 30 µm line width were formed on the curved surfaces. This printing method will have new applications in three-dimensional printed electronics.

  3. ITER Blanket First Wall (WBS 1.6{sub 1}A)

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Bong Guen; Kim, H. G.; Kim, J. H. (and others)

    2008-03-15

    International Thermonuclear Experimental Reactor (ITER) project is the international collaboration one for the commercialization of nuclear fusion energy through the technical and engineering verification. In ITER project, we plan to procure the blanket systems which has the risk of technology and cost when it is newly developed. We are developing the manufacturing process and joining technology for the ITER blanket to complete the procurement with qualified blanket system. To evaluate the soundness of manufacturing process, specimen and mock-up tests are being prepared. Finally, we can obtain the key technology of nuclear fusion reactor especially on the blanket design, joining and manufacturing technology through the present project and these technologies will help the construction of Korea fusion DEMO reactor and the development of commercial nuclear fusion reactor in Korea. In 1st year, through the fabrication of the Cu/SS and Be/Cu joint specimen, fabrication procedure such as material preparation, canning, degassing, HIP (Hot Isostatic Pressing), PHHT (Post HIP heat treatment) was established. The optimized HIP conditions (1050 .deg. C, 150 MPa, 2 hr for Cu/SS and 580 - 620 .deg. C, 100-150 MPa, 2 hr for Be/Cu) were developed through the investigation on joint specimen fabricated with the various HIP conditions; the destructive tests of joint and NDT such as UT (10 MHz, 0.25 inch D, flat type) and ECT. Several mock-ups were fabricated for confirming the joint integrity and NDT. specimens fabricated with these mock-ups were used in mechanical tests including microstructure observation. The mock-ups were used in the HHF test after the developed NDT. In 2nd year, PHHT of Cu was investigated in order to recover its mechanical properties, and the pre-qualification mock-up were fabricated against the Qualification Program and sent to RF for HHF testing in TSEFEY. FW fabrication and joining procedure were documented in the form of the TSD. Qualification mock

  4. Effect of dietary Astragalus Polysaccharide supplements on testicular miRNA expression profiles and enzymatic changes of breeder cocks.

    Science.gov (United States)

    Wu, Shengru; Ren, Xiaochun; Li, Yulong; Guo, Wei; Lei, Xinyu; Yao, Junhu; Yang, Xiaojun

    2017-01-05

    Astragalus Polysaccharide (APS) is an important feed additive due to its immunomodulatory functions. Previous studies have proven that miRNAs play important roles in posttranscriptional gene regulation. Our goals were to identify differentially expressed miRNAs in testes in responses to APS dietary supplements and to find the effects of APS on breeder cock testes. We measured several enzymatic activities in testes and sperm samples and further generated miRNA expression profiles of testes from breeder cocks fed with control diets and extra APS. As a result, we found APS could increase testicular functional activities of marker enzymes. Meanwhile, there were 16 up-regulated and 17 down-regulated miRNAs in APS group, compared with the control group meeting the criteria of P-values cocks.

  5. Influence of dietary selenomethionine supplementation on performance and selenium status of broiler breeders and their subsequent progeny.

    Science.gov (United States)

    Wang, YongXia; Zhan, XiuAn; Yuan, Dong; Zhang, XiWen; Wu, RuJuan

    2011-12-01

    The study was conducted to investigate the effects of dietary maternal selenomethionine or sodium selenite supplementation on performance and selenium status of broiler breeders and their next generation. Two hundred and forty 39-week-old Lingnan yellow broiler breeders were allocated randomly into two treatments, each of which included three replicates of 40 birds. Pretreatment period was 2 weeks, and the experiment lasted 8 weeks. The groups were fed the same basal diet supplemented with 0.30 mg selenium/kg of sodium selenite or selenomethionine. After incubation, 180 chicks from the same parental treatment group were randomly divided into three replicates, with 60 birds per replicate. All the offspring were fed the same diet containing 0.04 mg selenium/kg, and the experiment also lasted 8 weeks. Birth rate was greater (p selenium concentration in serum, liver, kidney, and breast muscle of broiler breeders, selenium deposition in the yolk, and albumen and tissues' (liver, kidney, breast muscle) selenium concentrations of 1-day-old chicks were significantly (p supplementation compared with maternal sodium selenite supplementation. The antioxidant status of 1-day-old chicks was greatly improved by maternal selenomethionine intake in comparison with maternal sodium selenite intake and was evidenced by the increased glutathione peroxidase activity in breast muscle (p supplementation increased birth rate and Se deposition in serum and tissues of broiler breeders as well as in egg yolk and egg albumen more than maternal sodium selenite supplementation. Furthermore, maternal selenomethionine intake was also superior to maternal sodium selenite intake in improving the tissues Se deposition and antioxidant status of 1-day-old chicks and increasing the performance of the progeny during 8 weeks of post-hatch life.

  6. Systemic Administration of Proteoglycan Protects BALB/c Retired Breeder Mice from Experimental Arthritis

    Directory of Open Access Journals (Sweden)

    Larissa Lumi Watanabe Ishikawa

    2016-01-01

    Full Text Available This study was undertaken to evaluate the prophylactic potential of proteoglycan (PG administration in experimental arthritis. Female BALB/c retired breeder mice received two (2xPG50 and 2xPG100 groups or three (3xPG50 group intraperitoneal doses of bovine PG (50 μg or 100 μg every three days. A week later the animals were submitted to arthritis induction by immunization with three i.p. doses of bovine PG associated with dimethyldioctadecylammonium bromide adjuvant at intervals of 21 days. Disease severity was daily assessed after the third dose by score evaluation. The 3xPG50 group showed significant reduction in prevalence and clinical scores. This protective effect was associated with lower production of IFN-γ and IL-17 and increased production of IL-5 and IL-10 by spleen cells restimulated in vitro with PG. Even though previous PG administration restrained dendritic cells maturation this procedure did not alter the frequency of regulatory Foxp3+ T cells. Lower TNF-α and IL-6 levels and higher expression of ROR-γ and GATA-3 were detected in the paws of protected animals. A delayed-type hypersensitivity reaction confirmed specific tolerance induction. Taken together, these results indicate that previous PG inoculation determines a specific tolerogenic effect that is able to decrease severity of subsequently induced arthritis.

  7. Estimated recurrence frequencies for initiating accident categories associated with the Clinch River Breeder Reactor Plant design

    Energy Technology Data Exchange (ETDEWEB)

    Copus, E R

    1982-04-01

    Estimated recurrence frequencies for each of twenty-five generic LMFBR initiating accident categories were quantified using the Clinch River Breeder Reactor Plant (CRBRP) design. These estimates were obtained using simplified systems fault trees and functional event tree models from the Accident Delineation Study Phase I Final Report coupled with order-of-magnitude estimates for the initiator-dependent failure probabilities of the individual CRBRP engineered safety systems. Twelve distinct protected accident categories where SCRAM is assumed to be successful are estimated to occur at a combined rate of 10/sup -3/ times per year while thirteen unprotected accident categories in which SCRAM fails are estimated to occur at a combined rate on the order of 10/sup -5/ times per year. These estimates are thought to be representative despite the fact that human performance factors, maintenance and repair, as well as input common cause uncertainties, were not treated explicitly. The overall results indicate that for the CRBRP design no single accident category appears to be dominant, nor can any be totally eliminated from further investigation in the areas of accident phenomenology for in-core events and post-accident phenomenology for containment.

  8. Profile of Serum Metabolites and Proteins of Broiler Breeders in Rearing Age

    Directory of Open Access Journals (Sweden)

    MS Rezende

    Full Text Available ABSTRACT The excellence of modern broiler production is based on the genetic improvement of broiler strains for high growth rate and high egg production, associated with technological developments in nutrition, management, and health. Over the last decades, the clinical biochemistry of broilers has been studied to determine serum biochemical component values; however, there are still many knowledge gaps on factors that determine changes in these values. In this study, the serum lipid and protein profiles of 4-week-old male and female Cobb broiler breeders were evaluated. Blood samples were collected on a commercial farm located in the city of Uberlândia, MG, Brazil. The following parameters were evaluated: total protein, albumin, globulin, albumin to globulin ratio (A/V, uric acid, urea, cholesterol, and triglyceride levels using an automatic analyzer. The results showed sex-specific biochemical patterns for most blood parameters evaluated. Moreover, the obtained values were different from those obtained in many published studies with broilers and commercial layers, stressing the need to develop further studies with chickens of different ages.

  9. A FAST BREEDER REACTOR SPENT FUEL MEASUREMENTS PROGRAM FOR BN-350 REACTOR

    Energy Technology Data Exchange (ETDEWEB)

    P. STAPLES; J. HALBIG; ET AL

    1999-04-01

    A project to verify the fissile content of fast breeder reactor spent nuclear fuel is underway in the Republic of Kasakhstan. There are a variety of assembly types with different irradiation histories and profiles in the reactor that require a variety of measurement and analysis procedures. These procedures will be discussed and compared as will the general process that has been designed to resolve any potential measurement discrepancies. The underwater counter is part of a system that is designed to assist the International Atomic Energy Agency (IAEA) in maintaining continuity of knowledge from the time of measurement until the measured item is placed in a welded container with a unique identification. In addition to satisfying IAEA requirements for the spent nuclear fuel, this measurement program is able to satisfy some of the measurement requirements for the Kasakhstan Atomic Energy Agency concerning the repackaging of the spent nuclear fuel into a standard canister. The project is currently operational in a mode requiring the IAEA's continuous presence.

  10. Effect of Different Storage Periods and Temperatures on the Hatchability of Broiler Breeder Eggs

    Directory of Open Access Journals (Sweden)

    A. Mahmud*, M. Z. U. Khan1, Saima1 and M. A. Javed

    2011-01-01

    Full Text Available Temperature and humidity have been the two most common variables used to manipulate the storage environment of hatching eggs. To ascertain the effects of different egg storage periods and temperatures on hatchability; 400 eggs were obtained from a broiler breeder flock of 32 weeks of age on a single day collection basis. These eggs were randomly divided into 5 equal groups of 80 eggs each. After collection these were cleaned, fumigated and stored on four temperatures viz 4oC, 16oC, room temperature (25oC and ambient temperature (29oC. Each group was further subdivided into 4 replicates having 20 eggs each. Eggs of Group A (control were set in incubator with temperature of 37.5oC and relative humidity 60% after the storage of one day. Eggs of rest of the four groups were set in the incubator after the storage of 3, 6, 9 and 12 days. Subsequently, these were shifted to hatchers on 18th day where the temperature and humidity were maintained at 36.5oC and 75%, respectively. The data on hatchability and dead-in-shell embryos for various groups were recorded. The results revealed that as the storage period increased at different temperatures, the hatchability decreased significantly (P<0.01. Similarly, as the storage time increased, the percentage of dead-in-shell embryos increased (P<0.01.

  11. Measurements of Ion Selective Containment on the RF Charge Breeder Device BRIC

    CERN Document Server

    Variale, Vincenzo; Batazova, Marina; Boggia, Antonio; Clauser, Tarcisio; Kuznetsov, Gennady I; Rainò, Antonio; Shiyankov, Sergey; Skarbo, Boris A; Valentino, Vincenzo; Verrone, Grazia

    2005-01-01

    The "charge state breeder" BRIC (BReeding Ion Charge) is based on an EBIS source and it is designed to accept Radioactive Ion Beam (RIB) with charge +1, in a slow injection mode, to increase their charge state up to +n. BRIC has been developed at the INFN section of Bari (Italy) during these last 3 years with very limited funds. Now, it has been assembled at the LNL (Italy) where are in progress the first tests as stand alone source. The new feature of BRIC, with respect to the classical EBIS, is given by the insertion, in the ion drift chamber, of a Radio Frequency (RF) Quadrupole aiming to filtering the unwanted elements and then making a more efficient containment of the wanted ions. In this contribution, the measurements of the selective effect on the ion charge state containement of the RF quadrupole field, applied on the ion chamber, will be reported and discussed. The ion charge state analisys of the ions trapped in BRIC seem confirm, as foreseen by simulation results carried out previously, that the s...

  12. Modelling and design of high compression electron guns for EBIS/T charge breeders

    CERN Document Server

    AUTHOR|(CDS)2087190; Zschornack, G.; Lettry, J.; Wenander, F.

    In this thesis the optimization of the REXEBIS charge breeder at the ISOLDE facility is presented. REXEBIS in its current state provides a current density of 200A/cm² inside the trapping region at 2 T and will be optimized to the physical limit of its design. To overcome this limit a new electron gun, the HEC² gun, was designed in collaboration with the BNL and is in commission at TestEBIS. This electron gun promises a current density of >10 kA/cm², which decreases the charge breeding time significantly. This thesis presents novel simulation techniques supporting the commissioning phase by explaining the sources of occurring loss current and, in addition, evaluate the currently installed collector for compatibility with the HEC2 gun operating at its design limit. The experience gained from the commission of the HEC² gun and the established numerical techniques lead to the development of a smaller high-compression electron gun for medical purposes, the MEDeGUN. This electron gun should provide a high-quali...

  13. Performance characterization of geopolymer composites for hot sodium exposed sacrificial layer in fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Haneefa, K. Mohammed, E-mail: mhkolakkadan@gmail.com [Department of Civil Engineering, IIT Madras, Chennai (India); Santhanam, Manu [Department of Civil Engineering, IIT Madras, Chennai (India); Parida, F.C. [Radiological Safety Division, Indira Gandhi Centre for Atomic Research, Kalpakkam (India)

    2013-12-15

    Highlights: • Performance evaluation of geopolymers subjected to hot liquid sodium is performed. • Apart from mechanical properties, micro-analytical techniques are used for material characterization. • The geopolymer composite showed comparatively lesser damage than conventional cement composites. • Geopolymer technology can emerge as a new choice for sacrificial layer in SCFBRs. - Abstract: A sacrificial layer of concrete is used in sodium cooled fast breeder reactors (SCFBRs) to mitigate thermo-chemical effect of accidentally spilled sodium at and above 550 °C on structural concrete. Performance of this layer is governed by thermo-chemical stability of the ingredients of sacrificial layer concrete. Concrete with limestone aggregate is generally used as a sacrificial layer. Conventional cement based systems exhibit instability in hot liquid sodium environment. Geo-polymer composites are well known to perform excellently at elevated temperatures compared to conventional cement systems. This paper discusses performance of such composites subjected to exposure of hot liquid sodium in air. The investigation includes comprehensive evaluation of various geo-polymer composites before any exposure, after heating to 550 °C in air, and after immersing in hot liquid sodium initially heated to 550 °C in air. Results from the current study indicate that hot liquid sodium produces less damage to geopolymer composites than to the existing conventional cement based system. Hence, the geopolymer technology has potential application in mitigating the degrading effects of sodium fires and can emerge as a new choice for sodium exposed sacrificial layer in SCFBRs.

  14. Antibacterial efficacy of commercial disinfectants on dirt floor used in poultry breeder houses

    Directory of Open Access Journals (Sweden)

    F Pilotto

    2007-06-01

    Full Text Available Dirt floors are used on most Brazilian poultry farms since the construction of concrete floors is very expensive. In vitro tests carried out to verify the effectiveness of disinfectants do not consider the adverse conditions found in poultry farms. Therefore, the present study aimed at evaluating the effect of six commercial disinfectants on the reduction of total and fecal coliforms on the dirt floor of breeder houses. The amount of disinfectant solution to be used per square meter was defined by counting total and fecal coliforms at different soil depths and by analyzing soil physical properties. Coliforms were detected at 0.5 cm, and one liter of disinfectant solution was sufficient for soil saturation at this depth. After that, the efficacy of six commercial products (caustic soda, hydrated lime, phenols 1 and 2, iodine, glutaraldehyde, and quaternary ammonium in reducing the number of coliforms, after six hours of contact with the dirt floor, was assessed using the most probable number (MPN method. Escherichia coli specimens isolated from the dirt floor were used to evaluate in vitro effectiveness of disinfectants. Products that yielded the best results in the MPN method were also effective in the in vitro tests. Among the tested disinfectants, hydrated lime was the most efficient, reducing the initial contamination by 2.9 log after six hours of contact with the dirt floor.

  15. Selection of shrimp breeders free of white spot syndrome and infectious hypodermal and hematopoietic necrosis

    Directory of Open Access Journals (Sweden)

    Carlos Cesar de Mello Junior

    2011-05-01

    Full Text Available The objective of this work was to select surviving breeders of Litopenaeus vannamei from white spot syndrome virus (WSSV outbreak, adapted to local climatic conditions and negatively diagnosed for WSSV and infectious hypodermal and hematopoietic necrosis virus (IHHNV, and to evaluate if this strategy is a viable alternative for production in Santa Catarina, Brazil. A total of 800 males and 800 females were phenotypically selected in a farm pond. Nested-PCR analyses of 487 sexually mature females and 231 sexually mature males showed that 63% of the females and 55% of the males were infected with IHHNV. Animals free of IHHNV were tested for WSSV, and those considered double negative were used for breeding. The post-larvae produced were stocked in nine nursery tanks for analysis. From the 45 samples, with 50 post-larvae each, only two were positive for IHHNV and none for WSSV. Batches of larvae diagnosed free of virus by nested-PCR were sent to six farms. A comparative analysis was carried out in growth ponds, between local post-larvae and post-larvae from Northeast Brazil. Crabs (Chasmagnathus granulata, blue crabs (Callinectes sapidus, and sea hares (Aplysia brasiliana, which are possible vectors of these viruses, were also evaluated. The mean survival was 55% for local post-larvae against 23.4% for post-larvae from the Northeast. Sea hares showed prevalence of 50% and crabs of 67% of WSSV.

  16. I'm sexy and I glow it: female ornamentation in a nocturnal capital breeder.

    Science.gov (United States)

    Hopkins, Juhani; Baudry, Gautier; Candolin, Ulrika; Kaitala, Arja

    2015-10-01

    In many species, males rely on sexual ornaments to attract females. Females, by contrast, rarely produce ornaments. The glow-worm (Lampyris noctiluca) is an exception where wingless females glow to attract males that fly in search of females. However, little is known about the factors that promote the evolution of female ornaments in a sexual selection context. Here, we investigated if the female ornament of the glow-worm is a signal of fecundity used in male mate choice. In support of this, we found brightness to correlate with female fecundity, and males to prefer brighter dummy females. Thus, the glow emitted by females is a reliable sexual signal of female fecundity. It is likely that male preference for the fecundity-indicating ornament has evolved because of large variation among females in fecundity, and because nocturnal males cannot directly assess female size and fecundity. These results indicate that female ornamentation may evolve in capital breeders (i.e. those in which stored resources are invested in reproduction) when females vary significantly in fecundity and this variation cannot be assessed directly by males. © 2015 The Author(s).

  17. Advanced automation concepts applied to Experimental Breeder Reactor-II startup

    Energy Technology Data Exchange (ETDEWEB)

    Berkan, R.C.; Upadhyaya, B.R.; Bywater, R.L. (Tennessee Univ., Knoxville, TN (United States). Dept. of Nuclear Engineering); Kisner, R.A. (Oak Ridge National Lab., TN (United States))

    1991-08-01

    The major objective of this work is to demonstrate through simulations that advanced liquid-metal reactor plants can be operated from low power by computer control. Development of an automatic control system with this objective will help resolve specific issues and provide proof through demonstration that automatic control for plant startup is feasible. This paper presents an advanced control system design for startup of the Experimental Breeder Reactor-2 (EBR-2) located at Idaho Falls, Idaho. The design incorporates recent methods in nonlinear control with advanced diagnostics techniques such as neural networks to form an integrated architecture. The preliminary evaluations are obtained in a simulated environment by a low-order, valid nonlinear model. Within the framework of phase 1 research, the design includes an inverse dynamics controller, a fuzzy controller, and an artificial neural network controller. These three nonlinear control modules are designed to follow the EBR-2 startup trajectories in a multi-input/output regime. They are coordinated by a supervisory routine to yield a fault-tolerant, parallel operation. The control system operates in three modes: manual, semiautomatic, and fully automatic control. The simulation results of the EBR-2 startup transients proved the effectiveness of the advanced concepts. The work presented in this paper is a preliminary feasibility analysis and does not constitute a final design of an automated startup control system for EBR-2. 14 refs., 43 figs.

  18. Assessment of gel-sphere-pac fuel for fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Lackey, W J; Selle, J E [comps.

    1978-10-01

    An assessment of the state of the art for the gel-sphere-pac process was undertaken to provide a sound basis for further development of the technology. Information is provided on sol preparation, sphere forming, drying, sintering, characterization, loading, fuel rod inspection, and irradiation performance. In addition, discussions are included on: evaluation of the potential for scale-up to production capacities, potential problems associated with remote operation, and future work required to further develop the technology. Three techniques are available for microsphere production: (1) internal gelation, (2) external gelation, and (3) gelation by water extraction. Each has its own advantages and disadvantages; for example, internal gelation appears better suited to the preparation of large spheres than the other processes. Numerous advantages and disadvantages are discussed in detail. Scale-up or remote operation of these techniques appears achievable, although some would require less development than others. Techniques have been developed for drying and sintering spheres. Extensive technology has been developed for sphere characterization, handling, and the loading and inspection of fuel pins. Data available to date indicates that sphere-pac oxide fuel will perform similarly to pellet oxide fuels under fast breeder reactor operating conditions. Gel-sphere-pac technology also appears attractive for carbide fuels.

  19. The new ECR charge breeder for the Selective Production of Exotic Species project at INFN—Laboratori Nazionali di Legnaro

    Energy Technology Data Exchange (ETDEWEB)

    Galatà, A., E-mail: alessio.galata@lnl.infn.it; Patti, G.; Roncolato, C. [INFN-Laboratori Nazionali di Legnaro, Viale dell’Università 2, 35020 Padova, Legnaro (Italy); Angot, J.; Lamy, T. [LPSC-Université Grenoble Alpes-CNRS/IN2P3, 53 rue des Martyrs, 38026 Grenoble CEDEX (France)

    2016-02-15

    The Selective Production of Exotic Species (SPES) project is an ISOL facility under construction at Istituto Nazionale di Fisica Nucleare–Laboratori Nationali di Legnaro (INFN-LNL). 1+ radioactive ions, produced and extracted from the target-ion-source system, will be charge bred to high charge states by an ECR charge breeder (SPES-CB): the project will adopt an upgraded version of the PHOENIX charge breeder, developed since about twenty years by the Laboratoire de Physique Subatomique et de Cosmologie (LPSC). The collaboration between LNL and LPSC started in 2010 with charge breeding experiments performed on the LPSC test bench and led, in June 2014, to the signature of a Research Collaboration Agreement for the delivery of a complete charge breeder and ancillaries, satisfying the SPES requirements. Important technological aspects were tackled during the construction phase, as, for example, beam purity issues, electrodes alignment, and vacuum sealing. This phase was completed in spring 2015, after which the qualification tests were carried out at LPSC on the 1+/q+ test stand. This paper describes the characteristics of the SPES-CB, with particular emphasis on the results obtained during the qualification tests: charge breeding of Ar, Xe, Rb, and Cs satisfied the SPES requirements for different intensities of the injected 1+ beam, showing very good performances, some of which are “best ever” for this device.

  20. Effect of dietary supplementation of essential oils mixture on performance, eggshell quality, hatchability, and mineral excretion in quail breeders.

    Science.gov (United States)

    Olgun, Osman; Yıldız, Alp Önder

    2014-12-01

    The main aim of this study was to investigate the effect of six different levels (0, 50, 100, 200, 400, and 600 mg/kg) of phytogenic feed additive containing a mixture essential oils from thyme, black cumin, fennel, anise and rosemary on performance, eggshell quality, reproductive traits, and mineral excretion in quail breeders. In this trial, a total of 60 male and 120 female quails, 91 days old, were randomly distributed in six experimental groups. During the 60-day experiment period, birds were fed with six treatment diets. Performances, eggshell qualities, hatchability, and mineral excretion data were evaluated at the end of the experiment. Results showed that the different dietary levels of essential oil mixture had no significant effect on performance parameters, damaged eggs, eggshell weight, fertility, hatchability of fertile eggs, hatchability of set eggs, and lead and boron excretion. On the other hand, 50 mg/kg supplementation of essential oil mixture (EOM) significantly improved egg-breaking strength and eggshell thickness, and ash, calcium, phosphorus, magnesium, manganese, zinc, and cadmium excretion was significantly depressed in quail breeders supplemented with the two higher doses (400 or 600 mg/kg) of EOM. These results concluded that supplementing diets with EOM improved egg-breaking strength and decreased excretion of minerals in breeder quails.