Decommissioning Handbook

Energy Technology Data Exchange (ETDEWEB)

1994-03-01

The Decommissioning Handbook is a technical guide for the decommissioning of nuclear facilities. The decommissioning of a nuclear facility involves the removal of the radioactive and, for practical reasons, hazardous materials to enable the facility to be released and not represent a further risk to human health and the environment. This handbook identifies and technologies and techniques that will accomplish these objectives. The emphasis in this handbook is on characterization; waste treatment; decontamination; dismantling, segmenting, demolition; and remote technologies. Other aspects that are discussed in some detail include the regulations governing decommissioning, worker and environmental protection, and packaging and transportation of the waste materials. The handbook describes in general terms the overall decommissioning project, including planning, cost estimating, and operating practices that would ease preparation of the Decommissioning Plan and the decommissioning itself. The reader is referred to other documents for more detailed information. This Decommissioning Handbook has been prepared by Enserch Environmental Corporation for the US Department of Energy and is a complete restructuring of the original handbook developed in 1980 by Nuclear Energy Services. The significant changes between the two documents are the addition of current and the deletion of obsolete technologies and the addition of chapters on project planning and the Decommissioning Plan, regulatory requirements, characterization, remote technology, and packaging and transportation of the waste materials.

A Road Map to Canadian Chemical Recovery Handbook for Inhabited Areas: Scoping Study

Science.gov (United States)

2014-05-01

A Road Map to Canadian Chemical Recovery Handbook for I © Her Majesty the Queen in Right of Canada, as represented by the Minister of National...Australia (EMA) Office of Attorney General, Canberra. b) Australian Emergency Management Institute Mount Macedon, Victoria

Safety analysis and risk assessment handbook

International Nuclear Information System (INIS)

Peterson, V.L.; Colwell, R.G.; Dickey, R.L.

1997-01-01

This Safety Analysis and Risk Assessment Handbook (SARAH) provides guidance to the safety analyst at the Rocky Flats Environmental Technology Site (RFETS) in the preparation of safety analyses and risk assessments. Although the older guidance (the Rocky Flats Risk Assessment Guide) continues to be used for updating the Final Safety Analysis Reports developed in the mid-1980s, this new guidance is used with all new authorization basis documents. With the mission change at RFETS came the need to establish new authorization basis documents for its facilities, whose functions had changed. The methodology and databases for performing the evaluations that support the new authorization basis documents had to be standardized, to avoid the use of different approaches and/or databases for similar accidents in different facilities. This handbook presents this new standardized approach. The handbook begins with a discussion of the requirements of the different types of authorization basis documents and how to choose the one appropriate for the facility to be evaluated. It then walks the analyst through the process of identifying all the potential hazards in the facility, classifying them, and choosing the ones that need to be analyzed further. It then discusses the methods for evaluating accident initiation and progression and covers the basic steps in a safety analysis, including consequence and frequency binning and risk ranking. The handbook lays out standardized approaches for determining the source terms of the various accidents (including airborne release fractions, leakpath factors, etc.), the atmospheric dispersion factors appropriate for Rocky Flats, and the methods for radiological and chemical consequence assessments. The radiological assessments use a radiological open-quotes templateclose quotes, a spreadsheet that incorporates the standard values of parameters, whereas the chemical assessments use the standard codes ARCHIE and ALOHA

DOE handbook electrical safety

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-01-01

Electrical Safety Handbook presents the Department of Energy (DOE) safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety guidance and information for DOE installations to effect a reduction or elimination of risks associated with the use of electrical energy. The objectives of this handbook are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

Technical resource documents and technical handbooks for hazardous-wastes management

Energy Technology Data Exchange (ETDEWEB)

Schomaker, N.B.; Bliss, T.M.

1986-07-01

The Environmental Protection Agency is preparing a series of Technical Resource Documents (TRD's) and Technical Handbooks to provide best engineering control technology to meet the needs of the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) respectively. These documents and handbooks are basically compilation of research efforts of the Land Pollution Control Division (LPCD) to date. The specific areas of research being conducted under the RCRA land disposal program relate to laboratory, pilot and field validation studies in cover systems, waste leaching and solidification, liner systems and disposal facility evaluation. The technical handbooks provide the EPA Program Offices and Regions, as well as the states and other interested parties, with the latest information relevant to remedial actions.

Controlling organic chemical hazards in food manufacturing: a hazard analysis critical control points (HACCP) approach.

Science.gov (United States)

Ropkins, K; Beck, A J

2002-08-01

Hazard analysis by critical control points (HACCP) is a systematic approach to the identification, assessment and control of hazards. Effective HACCP requires the consideration of all hazards, i.e., chemical, microbiological and physical. However, to-date most 'in-place' HACCP procedures have tended to focus on the control of microbiological and physical food hazards. In general, the chemical component of HACCP procedures is either ignored or limited to applied chemicals, e.g., food additives and pesticides. In this paper we discuss the application of HACCP to a broader range of chemical hazards, using organic chemical contaminants as examples, and the problems that are likely to arise in the food manufacturing sector. Chemical HACCP procedures are likely to result in many of the advantages previously identified for microbiological HACCP procedures: more effective, efficient and economical than conventional end-point-testing methods. However, the high costs of analytical monitoring of chemical contaminants and a limited understanding of formulation and process optimisation as means of controlling chemical contamination of foods are likely to prevent chemical HACCP becoming as effective as microbiological HACCP.

Informing Workers of Chemical Hazards: The OSHA Hazard Communication Standard.

Science.gov (United States)

American Chemical Society, Washington, DC.

Practical information on how to implement a chemical-related safety program is outlined in this publication. Highlights of the federal Occupational Safety and Health Administrations (OSHA) Hazard Communication Standard are presented and explained. These include: (1) hazard communication requirements (consisting of warning labels, material safety…

1992 Tier Two emergency and hazardous chemical inventory

International Nuclear Information System (INIS)

1993-03-01

This report is a compilation of data on emergency and hazardous chemicals stored at the Hanford Reservation. The report lists name or chemical description, physical and health hazards, inventories and storage location

Reactive chemicals and process hazards

International Nuclear Information System (INIS)

Surianarayanan, M.

2016-01-01

Exothermic chemical reactions are often accompanied by significant heat release, and therefore, need a thorough investigation before they are taken to a plant scale. Sudden thermal energy releases from exothermic decompositions and runaway reactions have contributed to serious fire and explosions in several chemical process plants. Similarly, thermal runaway had also occurred in storage and transportation of reactive chemicals. The secondary events of thermal runaway reactions can be rupture of process vessel, toxic spills and release of explosive vapor clouds or combination of these also. The explosion hazards are governed by the system thermodynamics and kinetics of the thermal process. Theoretical prediction of limiting temperature is difficult due to process complexities. Further, the kinetic data obtained through classical techniques, at conditions far away from runaway situation, is often not valid for assessing the runaway behavior of exothermic processes. The main focus of this lecture is to discuss the causes and several contributing factors for thermal runaway and instability and present analyses of the methodologies of the new instrumental techniques for assessing the thermal hazards of reactive chemicals during processing, storage and transportation. (author)

Process safety management for highly hazardous chemicals

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-02-01

Purpose of this document is to assist US DOE contractors who work with threshold quantities of highly hazardous chemicals (HHCs), flammable liquids or gases, or explosives in successfully implementing the requirements of OSHA Rule for Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119). Purpose of this rule is to prevent releases of HHCs that have the potential to cause catastrophic fires, explosions, or toxic exposures.

Toxic substances handbook

Science.gov (United States)

Junod, T. L.

1979-01-01

Handbook, published in conjunction with Toxic Substances Alert Program at NASA Lewis Research Center, profiles 187 toxic chemicals in their relatively pure states and include 27 known or suspected carcinogens.

Hazard assessment and risk management of offshore production chemicals

International Nuclear Information System (INIS)

Schobben, H.P.M.; Scholten, M.C.T.; Vik, E.A.; Bakke, S.

1994-01-01

There is a clear need for harmonization of the regulations with regard to the use and discharge of drilling and production chemicals in the North Sea. Therefore the CHARM (Chemical Hazard Assessment and Risk Management) model was developed. Both government (of several countries) and industry (E and P and chemical suppliers) participated in the project. The CHARM model is discussed and accepted by OSPARCON. The CHARM model consists of several modules. The model starts with a prescreening on the basis of hazardous properties like persistency, accumulation potential and the appearance on black lists. The core of the model.consists of modules for hazard assessment and risk analysis. Hazard assessment covers a general environmental evaluation of a chemical on the basis of intrinsic properties of that chemical. Risk analysis covers a more specific evaluation of the environmental impact from the use of a production chemical, or a combination of chemicals, under actual conditions. In the risk management module the user is guided to reduce the total risk of all chemicals used on a platform by the definition of measures in the most cost-effective way. The model calculates the environmental impact for the marine environment. Thereto three parts are distinguished: pelagic, benthic and food chain. Both hazard assessment and risk analysis are based on a proportional comparison of an estimated PEC with an estimated NEC. The PEC is estimated from the use, release, dilution and fate of the chemical and the NEC is estimated from the available toxicity data of the chemicals

Integrative Chemical-Biological Read-Across Approach for Chemical Hazard Classification

Science.gov (United States)

Low, Yen; Sedykh, Alexander; Fourches, Denis; Golbraikh, Alexander; Whelan, Maurice; Rusyn, Ivan; Tropsha, Alexander

2013-01-01

Traditional read-across approaches typically rely on the chemical similarity principle to predict chemical toxicity; however, the accuracy of such predictions is often inadequate due to the underlying complex mechanisms of toxicity. Here we report on the development of a hazard classification and visualization method that draws upon both chemical structural similarity and comparisons of biological responses to chemicals measured in multiple short-term assays (”biological” similarity). The Chemical-Biological Read-Across (CBRA) approach infers each compound's toxicity from those of both chemical and biological analogs whose similarities are determined by the Tanimoto coefficient. Classification accuracy of CBRA was compared to that of classical RA and other methods using chemical descriptors alone, or in combination with biological data. Different types of adverse effects (hepatotoxicity, hepatocarcinogenicity, mutagenicity, and acute lethality) were classified using several biological data types (gene expression profiling and cytotoxicity screening). CBRA-based hazard classification exhibited consistently high external classification accuracy and applicability to diverse chemicals. Transparency of the CBRA approach is aided by the use of radial plots that show the relative contribution of analogous chemical and biological neighbors. Identification of both chemical and biological features that give rise to the high accuracy of CBRA-based toxicity prediction facilitates mechanistic interpretation of the models. PMID:23848138

Chemical incidents resulted in hazardous substances releases in the context of human health hazards.

OpenAIRE

Palaszewska-Tkacz, Anna; Czerczak, Sławomir; Konieczko, Katarzyna

2017-01-01

Objectives: The research purpose was to analyze data concerning chemical incidents in Poland collected in 1999–2009 in terms of health hazards. Material and Methods: The data was obtained, using multimodal information technology (IT) system, from chemical incidents reports prepared by rescuers at the scene. The final analysis covered sudden events associated with uncontrolled release of hazardous chemical substances or mixtures, which may potentially lead to human exposure. Releases of uniden...

DOE handbook: Integrated safety management systems (ISMS) verification. Team leader's handbook

International Nuclear Information System (INIS)

1999-06-01

The primary purpose of this handbook is to provide guidance to the ISMS verification Team Leader and the verification team in conducting ISMS verifications. The handbook describes methods and approaches for the review of the ISMS documentation (Phase I) and ISMS implementation (Phase II) and provides information useful to the Team Leader in preparing the review plan, selecting and training the team, coordinating the conduct of the verification, and documenting the results. The process and techniques described are based on the results of several pilot ISMS verifications that have been conducted across the DOE complex. A secondary purpose of this handbook is to provide information useful in developing DOE personnel to conduct these reviews. Specifically, this handbook describes methods and approaches to: (1) Develop the scope of the Phase 1 and Phase 2 review processes to be consistent with the history, hazards, and complexity of the site, facility, or activity; (2) Develop procedures for the conduct of the Phase 1 review, validating that the ISMS documentation satisfies the DEAR clause as amplified in DOE Policies 450.4, 450.5, 450.6 and associated guidance and that DOE can effectively execute responsibilities as described in the Functions, Responsibilities, and Authorities Manual (FRAM); (3) Develop procedures for the conduct of the Phase 2 review, validating that the description approved by the Approval Authority, following or concurrent with the Phase 1 review, has been implemented; and (4) Describe a methodology by which the DOE ISMS verification teams will be advised, trained, and/or mentored to conduct subsequent ISMS verifications. The handbook provides proven methods and approaches for verifying that commitments related to the DEAR, the FRAM, and associated amplifying guidance are in place and implemented in nuclear and high risk facilities. This handbook also contains useful guidance to line managers when preparing for a review of ISMS for radiological

Emergency Evacuation of Hazardous Chemical Accidents Based on Diffusion Simulation

OpenAIRE

Jiang-Hua Zhang; Hai-Yue Liu; Rui Zhu; Yang Liu

2017-01-01

The recent rapid development of information technology, such as sensing technology, communications technology, and database, allows us to use simulation experiments for analyzing serious accidents caused by hazardous chemicals. Due to the toxicity and diffusion of hazardous chemicals, these accidents often lead to not only severe consequences and economic losses, but also traffic jams at the same time. Emergency evacuation after hazardous chemical accidents is an effective means to reduce the...

Safety, health and environmental committee (JKSHE): Establishing chemical hazard management

International Nuclear Information System (INIS)

Shyen, A.K.S.; Noriah Mod Ali; Sangau, J.K.

2012-01-01

Most of the laboratories in Malaysian Nuclear Agency are using chemicals in their research activities. However, it is known that using of chemicals without proper knowledge especially on the material characteristics as well as safe handling procedure may cause great harm to the workers. Therefore, Safety, Health and Environmental Committee (JKSHE) sees the need to establish a good chemical hazard management to ensure that a safe and healthy workplace and environment is provided. One of the elements in chemical hazard management is to carry out Chemical Hazard Risk Assessment (CHRA). The assessment was done so that decision can be made on suitable control measures upon use of such chemicals, such as induction and training courses to be given to the workers and health surveillance activities that may be needed to protect the workers. For this, JKSHE has recommended to conduct CHRA for one of the laboratories at Secondary Standard Dosimetry Laboratory (SSDL) namely Film Dosimeter Processing Room (dark room) as the initial effort towards a better chemical hazard management. This paper presents the case study where CHRA was conducted to identify the chemical hazards at the selected laboratory, the adequacy of existing control measures and finally the recommendation for more effective control measures. (author)

Toxics Release Inventory Chemical Hazard Information Profiles (TRI-CHIP) Dataset

Data.gov (United States)

U.S. Environmental Protection Agency — The Toxics Release Inventory (TRI) Chemical Hazard Information Profiles (TRI-CHIP) dataset contains hazard information about the chemicals reported in TRI. Users can...

Promotion of the Environment -The planning and draft of the e-handbook for the Central Baltic WATERCHAIN project

OpenAIRE

Mariaraj, Kumudha

2017-01-01

The purpose of this thesis was to make a e-handbook for the Central Baltic WATERCHAIN Project (CBWP) and catalog the steps taken. By making the e-handbook, the CBWP can reach its goals and customise the e-handbook to have a better customer experience. The CBWP is dedicated towards prevention of the loading of hazardous substances & nutrients into the water cycle and removal of the hazardous substances & nutrients from the water cycle. The CBWP is collaborated by nine institutes in Finland...

1990 Tier Two emergency and hazardous chemical inventory

International Nuclear Information System (INIS)

1991-03-01

This document contains the 1990 Two Tier Emergency and Hazardous Chemical Inventory. Submission of this Tier Two form (when requested) is required by Title 3 of the Superfund Amendments and Reauthorization Act of 1986, Section 312, Public Law 99--499, codified at 42 U.S.C. Section 11022. The purpose of this Tier Two form is to provide State and local officials and the public with specific information on hazardous chemicals present at your facility during the past year

Emergency Evacuation of Hazardous Chemical Accidents Based on Diffusion Simulation

Directory of Open Access Journals (Sweden)

Jiang-Hua Zhang

2017-01-01

Full Text Available The recent rapid development of information technology, such as sensing technology, communications technology, and database, allows us to use simulation experiments for analyzing serious accidents caused by hazardous chemicals. Due to the toxicity and diffusion of hazardous chemicals, these accidents often lead to not only severe consequences and economic losses, but also traffic jams at the same time. Emergency evacuation after hazardous chemical accidents is an effective means to reduce the loss of life and property and to smoothly resume the transport network as soon as possible. This paper considers the dynamic changes of the hazardous chemicals’ concentration after their leakage and simulates the diffusion process. Based on the characteristics of emergency evacuation of hazardous chemical accidents, we build a mixed-integer programming model and design a heuristic algorithm using network optimization and diffusion simulation (hereafter NODS. We then verify the validity and feasibility of the algorithm using Jinan, China, as a computational example. In the end, we compare the results from different scenarios to explore the key factors affecting the effectiveness of the evacuation process.

Welding engineering handbook. Volume 1

International Nuclear Information System (INIS)

Sundarrajan, S.; Bhaskar, S.V.; Amarnath Kumar, G.C.

1992-11-01

In this Welding Engineering Handbook, we have brought key application areas of welding which are of technocommercial importance. These details are not normally available. Each author, highly specialized in these areas has spent considerable amount of time and covered the topic exhaustively giving valuable details. Each application area has different quality requirements which are brought out clearly. This handbook is designed to cater the information source for various professionals in core sector industries like fabrication, shipbuilding, automobiles, nuclear plants, machine building, fertilisers and chemical industry, pressure vessel manufactures etc. We are sure that this handbook will serve as a reference reckoner to all plant/works managers, maintenance, projects, engineers, R and D and students. (original)

An illustrated landslide handbook for developing nations

Science.gov (United States)

Highland, Lynn M.; Bobrowsky, Peter

2008-01-01

As landslides continue to be a hazard that account for large numbers of human and animal casualties, property loss, and infrastructure damage, as well as impacts on the natural environment, it is incumbent on developed nations that resources be allocated to educate affected populations in less developed nations, and provide them with tools to effectively manage this hazard. Given that the engineering, planning and zoning, and mitigation techniques for landslide hazard reduction are more accessible to developed nations, it is crucial that such landslide hazard management tools be communicated to less developed nations in a language that is not overly technical, and provides information on basic scientific explanations on where, why and how landslides occur. The experiences of the United States, Canada, and many other nations demonstrate that, landslide science education, and techniques for reducing damaging landslide impacts may be presented in a manner that can be understood by the layperson. There are various methods through which this may be accomplished–community-level education, technology transfer, and active one-on-one outreach to national and local governments, and non-governmental organizations (NGOs), who disseminate information throughout the general population. The population at large can also benefit from the dissemination of landslide information directly to individual community members. The United States Geological Survey and the Geological Survey of Canada have just published and will distribute a universal landslide handbook that can be easily made available to emergency managers, local governments, and individuals. The handbook, “The Landslide Handbook: A Guide to Understanding Landslides” is initially published as U.S. Geological Survey Circular 1325, in English, available in print, and accessible on the internet. It is liberally illustrated with schematics and photographs, and provides the means for a basic understanding of landslides, with

Chemical hazard evaluation of material disposal area (MDA) B closure project

Energy Technology Data Exchange (ETDEWEB)

Laul, Jagdish C [Los Alamos National Laboratory

2010-04-19

TA-21, MDA-B (NES) is the 'contaminated dump,' landfill with radionuclides and chemicals from process waste disposed in 1940s. This paper focuses on chemical hazard categorization and hazard evaluation of chemicals of concern (e.g., peroxide, beryllium). About 170 chemicals were disposed in the landfill. Chemicals included products, unused and residual chemicals, spent, waste chemicals, non-flammable oils, mineral oil, etc. MDA-B was considered a High hazard site. However, based on historical records and best engineering judgment, the chemical contents are probably at best 5% of the chemical inventory. Many chemicals probably have oxidized, degraded or evaporated for volatile elements due to some fire and limited shelf-life over 60 yrs, which made it possible to downgrade from High to Low chemical hazard site. Knowing the site history and physical and chemical properties are very important in characterizing a NES site. Public site boundary is only 20 m, which is a major concern. Chemicals of concern during remediation are peroxide that can cause potential explosion and beryllium exposure due to chronic beryllium disease (CBD). These can be prevented or mitigated using engineering control (EC) and safety management program (SMP) to protect the involved workers and public.

Chemical hazards from decontamination solutions in low level waste

International Nuclear Information System (INIS)

Leventhal, L.; Miller, A.; Turney, J.; Naughton, M.; IMPELL Corp., Walnut Creek, CA; Electric Power Research Inst., Palo Alto, CA)

1985-01-01

Recent regulations are focussing more attention on the non-radioactive matrix materials associated with radioactive wastes. Decontamination of operating facilities is becoming a more significant source of low-level waste. This study reviewed the chemical and biological hazards of over 50 decontamination processes. Seventeen of the most prominent hard and soft decontamination processes were examined in detail. The chemical and biological hazards of these seventeen are presented in this paper. These hazards influence the choice of radwaste processing and packaging operations and methods. Federal, state and local regulations further impact on operations and waste disposal. Hazards to personnel, in plant and off-site, resulting from the decontamination cycle are evaluated. 1 fig., 5 tabs

Chemical incidents resulted in hazardous substances releases in the context of human health hazards

Directory of Open Access Journals (Sweden)

Anna Pałaszewska-Tkacz

2017-02-01

Full Text Available Objectives: The research purpose was to analyze data concerning chemical incidents in Poland collected in 1999–2009 in terms of health hazards. Material and Methods: The data was obtained, using multimodal information technology (IT system, from chemical incidents reports prepared by rescuers at the scene. The final analysis covered sudden events associated with uncontrolled release of hazardous chemical substances or mixtures, which may potentially lead to human exposure. Releases of unidentified substances where emergency services took action to protect human health or environment were also included. Results: The number of analyzed chemical incidents in 1999–2009 was 2930 with more than 200 different substances released. The substances were classified into 13 groups of substances and mixtures posing analogous risks. Most common releases were connected with non-flammable corrosive liquids, including: hydrochloric acid (199 cases, sulfuric(VI acid (131 cases, sodium and potassium hydroxides (69 cases, ammonia solution (52 cases and butyric acid (32 cases. The next group were gases hazardous only due to physico-chemical properties, including: extremely flammable propane-butane (249 cases and methane (79 cases. There was no statistically significant trend associated with the total number of incidents. Only with the number of incidents with flammable corrosive, toxic and/or harmful liquids, the regression analysis revealed a statistically significant downward trend. The number of victims reported was 1997, including 1092 children and 18 fatalities. Conclusions: The number of people injured, number of incidents and the high 9th place of Poland in terms of the number of Seveso establishments, and 4 times higher number of hazardous industrial establishments not covered by the Seveso Directive justify the need for systematic analysis of hazards and their proper identification. It is advisable enhance health risk assessment, both qualitative and

Limits of the comparison between radiological and chemical hazards

International Nuclear Information System (INIS)

Maximilien, R.; Bounolleau, B.

2003-01-01

The primary reason for comparing radiological and chemical hazards is, in the absence of knowledge of similarities between underlying mechanisms, the comparability of the methods used to evaluate their long-term consequences, especially at low doses: carcinogenicity, mutagenicity and effects on reproduction. For radiations, the evaluation is performed above all in terms of risk quantification while for chemicals hazard identification is the main concern. (authors)

A bird strike handbook for base-level managers

Science.gov (United States)

Payson, R. P.; Vance, J. D.

1984-09-01

To help develop more awareness about bird strikes and bird strike reduction techniques, this thesis compiled all relevant information through an extensive literature search, review of base-level documents, and personal interviews. The final product--A Bird Strike Handbook for Base-Level Managers--provides information on bird strike statistics, methods to reduce the strike hazards, and means to obtain additional assistance. The handbook is organized for use by six major base agencies: Maintenance, Civil Engineering, Operations, Air Field Management, Safety, and Air Traffic Control. An appendix follows at the end.

1993 Tier Two emergency and hazardous chemical inventory

International Nuclear Information System (INIS)

1994-03-01

This document comprises the following (January 1 to December 31, 1993) data for chemicals at Hanford Site, for Washington community right-to-know purposes: Chemical name, physical and health hazards, inventory, and storage code/locations

Chemical Hazards and Safety Issues in Fusion Safety Design

International Nuclear Information System (INIS)

Cadwallader, L.C.

2003-01-01

Radiological inventory releases have dominated accident consequences for fusion; these consequences are important to analyze and are generally the most severe result of a fusion facility accident event. However, the advent of, or plan for, large-scale usage of some toxic materials poses the additional hazard of chemical exposure from an accident event. Examples of toxic chemicals are beryllium for magnetic fusion and fluorine for laser fusion. Therefore, chemical exposure consequences must also be addressed in fusion safety assessment. This paper provides guidance for fusion safety analysis. US Department of Energy (DOE) chemical safety assessment practices for workers and the public are reviewed. The US Environmental Protection Agency (EPA) has published some guidance on public exposure to releases of mixtures of chemicals, this guidance has been used to create an initial guideline for treating mixed radiological and toxicological releases in fusion; for example, tritiated hazardous dust from a tokamak vacuum vessel. There is no convenient means to judge the hazard severity of exposure to mixed materials. The chemical fate of mixed material constituents must be reviewed to determine if there is a separate or combined radiological and toxicological carcinogenesis, or if other health threats exist with radiological carcinogenesis. Recommendations are made for fusion facility chemical safety evaluation and safety guidance for protecting the public from chemical releases, since such levels are not specifically identified in the DOE fusion safety standard

Handbook of interatomic potentials

International Nuclear Information System (INIS)

Stoneham, A.M.; Taylor, R.

1981-08-01

This Handbook collects together interatomic potentials for a large number of metals. Most of the potentials describe the interactions of host metal atoms with each other, and these, in some cases, may be applied to solid and liquid metals. In addition, there are potentials (a) for a metallic impurity alloyed with the host, (b) for a small number of chemical impurities in the metal (eg H, O), and (c) for rare-gas impurities, notably He. The Handbook is intended to be a convenient source of potentials for bulk, surface and defect calculations, both static and dynamic. (author)

[Chemical hazards arising from shale gas extraction].

Science.gov (United States)

Pakulska, Daria

2015-01-01

The development of the shale industry is gaining momentum and hence the analysis of chemical hazards to the environment and health of the local population is extreiely timely and important. Chemical hazards are created during the exploitation of all minerals, but in the case of shale gas production, there is much more uncertainty as regards to the effects of new technologies application. American experience suggests the increasing risk of environmental contamination, mainly groundwater. The greatest, concern is the incomplete knowledge of the composition of fluids used for fracturing shale rock and unpredictability of long-term effects of hydraulic fracturing for the environment and health of residents. High population density in the old continent causes the problem of chemical hazards which is much larger than in the USA. Despite the growing public discontent data on this subject are limited. First of all, there is no epidemiological studies to assess the relationship between risk factors, such as air and water pollution, and health effects in populations living in close proximity to gas wells. The aim of this article is to identify and discuss existing concepts on the sources of environmental contamination, an indication of the environment elements under pressure and potential health risks arising from shale gas extraction.

Environmental Risk Assessment: Spatial Analysis of Chemical Hazards and Risks in South Korea

Science.gov (United States)

Yu, H.; Heo, S.; Kim, M.; Lee, W. K.; Jong-Ryeul, S.

2017-12-01

This study identified chemical hazard and risk levels in Korea by analyzing the spatial distribution of chemical factories and accidents. The number of chemical factories and accidents in 5-km2 grids were used as the attribute value for spatial analysis. First, semi-variograms were conducted to examine spatial distribution patterns and to identify spatial autocorrelation of chemical factories and accidents. Semi-variograms explained that the spatial distribution of chemical factories and accidents were spatially autocorrelated. Second, the results of the semi-variograms were used in Ordinary Kriging to estimate chemical hazard and risk level. The level values were extracted from the Ordinary Kriging result and their spatial similarity was examined by juxtaposing the two values with respect to their location. Six peaks were identified in both the hazard and risk estimation result, and the peaks correlated with major cities in Korea. Third, the estimated hazard and risk levels were classified with geometrical interval and could be classified into four quadrants: Low Hazard and Low Risk (LHLR), Low Hazard and High Risk (LHHR), High Hazard and Low Risk (HHLR), and High Hazard and High Risk (HHHR). The 4 groups identified different chemical safety management issues in Korea; relatively safe LHLR group, many chemical reseller factories were found in HHLR group, chemical transportation accidents were in the LHHR group, and an abundance of factories and accidents were in the HHHR group. Each quadrant represented different safety management obstacles in Korea, and studying spatial differences can support the establishment of an efficient risk management plan.

Haz-Map: Information on Hazardous Chemicals and Occupational Diseases

Science.gov (United States)

... Help Glossary References About Us Search Hazardous Agents Occupational Diseases High Risk Jobs Non-Occupational Activities Industries Job ... Findings Haz-Map®: Information on Hazardous Chemicals and Occupational Diseases by Jay A. Brown, M.D., M.P. ...

Chemical hazards arising from shale gas extraction

Directory of Open Access Journals (Sweden)

Daria Pakulska

2015-02-01

Full Text Available The development of the shale industry is gaining momentum and hence the analysis of chemical hazards to the environment and health of the local population is extremely timely and important. Chemical hazards are created during the exploitation of all minerals, but in the case of shale gas production, there is much more uncertainty as regards to the effects of new technologies application. American experience suggests the increasing risk of environmental contamination, mainly groundwater. The greatest concern is the incomplete knowledge of the composition of fluids used for fracturing shale rock and unpredictability of long-term effects of hydraulic fracturing for the environment and health of residents. High population density in the old continent causes the problem of chemical hazards which is much larger than in the USA. Despite the growing public discontent data on this subject are limited. First of all, there is no epidemiological studies to assess the relationship between risk factors, such as air and water pollution, and health effects in populations living in close proximity to gas wells. The aim of this article is to identify and discuss existing concepts on the sources of environmental contamination, an indication of the environment elements under pressure and potential health risks arising from shale gas extraction. Med Pr 2015;66(1:99–117

An open framework for automated chemical hazard assessment based on GreenScreen for Safer Chemicals: A proof of concept.

Science.gov (United States)

Wehage, Kristopher; Chenhansa, Panan; Schoenung, Julie M

2017-01-01

GreenScreen® for Safer Chemicals is a framework for comparative chemical hazard assessment. It is the first transparent, open and publicly accessible framework of its kind, allowing manufacturers and governmental agencies to make informed decisions about the chemicals and substances used in consumer products and buildings. In the GreenScreen® benchmarking process, chemical hazards are assessed and classified based on 18 hazard endpoints from up to 30 different sources. The result is a simple numerical benchmark score and accompanying assessment report that allows users to flag chemicals of concern and identify safer alternatives. Although the screening process is straightforward, aggregating and sorting hazard data is tedious, time-consuming, and prone to human error. In light of these challenges, the present work demonstrates the usage of automation to cull chemical hazard data from publicly available internet resources, assign metadata, and perform a GreenScreen® hazard assessment using the GreenScreen® "List Translator." The automated technique, written as a module in the Python programming language, generates GreenScreen® List Translation data for over 3000 chemicals in approximately 30 s. Discussion of the potential benefits and limitations of automated techniques is provided. By embedding the library into a web-based graphical user interface, the extensibility of the library is demonstrated. The accompanying source code is made available to the hazard assessment community. Integr Environ Assess Manag 2017;13:167-176. © 2016 SETAC. © 2016 SETAC.

Chemical hazards analysis of resilient flooring for healthcare.

Science.gov (United States)

Lent, Tom; Silas, Julie; Vallette, Jim

2010-01-01

This article addresses resilient flooring, evaluating the potential health effects of vinyl flooring and the leading alternatives-synthetic rubber, polyolefin, and linoleum-currently used in the healthcare marketplace. The study inventories chemicals incorporated as components of each of the four material types or involved in their life cycle as feedstocks, intermediary chemicals, or emissions. It then characterizes those chemicals using a chemical hazard-based framework that addresses persistence and bioaccumulation, human toxicity, and human exposures.

ASSESSING CHEMICAL HAZARDS AT THE PLUTONIUM FINISHING PLANT FOR PLANNING FUTURE DECONTAMINATION AND DECOMMISSIONING

International Nuclear Information System (INIS)

HOPKINS, A.M.; KLOS, D.B.; MINETT, M.J.

2007-01-01

This paper documents the fiscal year (FY) 2006 assessment to evaluate potential chemical and radiological hazards associated with vessels and piping in the former plutonium process areas at Hanford's Plutonium Finishing Plant (PFP). Evaluations by PFP engineers as design authorities for specific systems and other subject-matter experts were conducted to identify the chemical hazards associated with transitioning the process areas for the long-term layup of PFP before its eventual final decontamination and decommissioning (D and D). D and D activities in the main process facilities were suspended in September 2005 for a period of between 5 and 10 years. A previous assessment conducted in FY 2003 found that certain activities to mitigate chemical hazards could be deferred safely until the D and D of PFP, which had been scheduled to result in a slab-on-grade condition by 2009. As a result of necessary planning changes, however, D and D activities at PFP will be delayed until after the 2009 time frame. Given the extended project and plant life, it was determined that a review of the plant chemical hazards should be conducted. This review to determine the extended life impact of chemicals is called the ''Plutonium Finishing Plant Chemical Hazards Assessment, FY 2006''. This FY 2006 assessment addresses potential chemical and radiological hazard areas identified by facility personnel and subject-matter experts who reevaluated all the chemical systems (items) from the FY 2003 assessment. This paper provides the results of the FY 2006 chemical hazards assessment and describes the methodology used to assign a hazard ranking to the items reviewed

75 FR 8575 - Testing of Certain High Production Volume Chemicals; Third Group of Chemicals

Science.gov (United States)

2010-02-25

...: Beilstein Database, CRC Handbook of Chemistry and Physics, Hawley's Condensed Chemical Dictionary, Illustrated Handbooks of Physical- Chemical Properties and Environmental Fate for Organic Chemicals, Merck... Coefficient: Method A (40 CFR 799.6755--shake flask). Method B (ASTM E 1147-92(2005)--liquid chromatography...

Hazard Assessment on Chlorine Distribution Use of Chemical Transportation Risk Index

International Nuclear Information System (INIS)

Kim, Jeong Gon; Byun, Hun Soo

2014-01-01

Chlorine is one of the most produced and most used non-flammable chemical substances in the world even though its toxicity and high reactivity cause the ozone layer depletion. However, in modern life, it is impossible to live a good life without using Chlorine and its derivatives since they are being used as an typical ingredient in more than 40 percent of the manufactured goods including medicines, detergents, deodorant, fungicides, herbicides, insecticides, and plastic, etc. Even if Chlorine has been handled and distributed in various business (small and medium-sized businesses, water purification plants, distribution company, etc.), there have been few researches about its possible health hazard and transportation risks. Accordingly, the purpose of this paper is to make a detailed assessment of Chlorinerelated risks and to model an index of chemicals transportation risks that is adequate for domestic circumstances. The assessment of possible health hazard and transportation risks was made on 13 kinds of hazardous chemicals, including liquid chlorine. This research may be contributed to standardizing the risk assessment of Chlorine and other hazardous chemicals by using an index of transportation risks

Hazard Assessment on Chlorine Distribution Use of Chemical Transportation Risk Index

Energy Technology Data Exchange (ETDEWEB)

Kim, Jeong Gon [Hanwha Chemical Ulsan Site, Ulsan (Korea, Republic of); Byun, Hun Soo [Chonnam National University, Yeosu (Korea, Republic of)

2014-12-15

Chlorine is one of the most produced and most used non-flammable chemical substances in the world even though its toxicity and high reactivity cause the ozone layer depletion. However, in modern life, it is impossible to live a good life without using Chlorine and its derivatives since they are being used as an typical ingredient in more than 40 percent of the manufactured goods including medicines, detergents, deodorant, fungicides, herbicides, insecticides, and plastic, etc. Even if Chlorine has been handled and distributed in various business (small and medium-sized businesses, water purification plants, distribution company, etc.), there have been few researches about its possible health hazard and transportation risks. Accordingly, the purpose of this paper is to make a detailed assessment of Chlorinerelated risks and to model an index of chemicals transportation risks that is adequate for domestic circumstances. The assessment of possible health hazard and transportation risks was made on 13 kinds of hazardous chemicals, including liquid chlorine. This research may be contributed to standardizing the risk assessment of Chlorine and other hazardous chemicals by using an index of transportation risks.

Gen IV Materials Handbook Implementation Plan

International Nuclear Information System (INIS)

Rittenhouse, P.; Ren, W.

2005-01-01

A Gen IV Materials Handbook is being developed to provide an authoritative single source of highly qualified structural materials information and materials properties data for use in design and analyses of all Generation IV Reactor Systems. The Handbook will be responsive to the needs expressed by all of the principal government, national laboratory, and private company stakeholders of Gen IV Reactor Systems. The Gen IV Materials Handbook Implementation Plan provided here addresses the purpose, rationale, attributes, and benefits of the Handbook and will detail its content, format, quality assurance, applicability, and access. Structural materials, both metallic and ceramic, for all Gen IV reactor types currently supported by the Department of Energy (DOE) will be included in the Gen IV Materials Handbook. However, initial emphasis will be on materials for the Very High Temperature Reactor (VHTR). Descriptive information (e.g., chemical composition and applicable technical specifications and codes) will be provided for each material along with an extensive presentation of mechanical and physical property data including consideration of temperature, irradiation, environment, etc. effects on properties. Access to the Gen IV Materials Handbook will be internet-based with appropriate levels of control. Information and data in the Handbook will be configured to allow search by material classes, specific materials, specific information or property class, specific property, data parameters, and individual data points identified with materials parameters, test conditions, and data source. Details on all of these as well as proposed applicability and consideration of data quality classes are provided in the Implementation Plan. Website development for the Handbook is divided into six phases including (1) detailed product analysis and specification, (2) simulation and design, (3) implementation and testing, (4) product release, (5) project/product evaluation, and (6) product

Waste Issues Associated with the Safe Movement of Hazardous Chemicals

International Nuclear Information System (INIS)

Dare, J. H.; Cournoyer, M. E.

2002-01-01

Moving hazardous chemicals presents the risk of exposure for workers engaged in the activity and others that might be in the immediate area. Adverse affects are specific to the chemicals and can range from minor skin, eye, or mucous membrane irritation, to burns, respiratory distress, nervous system dysfunction, or even death. A case study is presented where in the interest of waste minimization; original shipping packaging was removed from a glass bottle of nitric acid, while moving corrosive liquid through a security protocol into a Radiological Control Area (RCA). During the transfer, the glass bottle broke. The resulting release of nitric acid possibly exposed 12 employees with one employee being admitted overnight at a hospital for observation. This is a clear example of administrative controls to reduce the generation of suspect radioactive waste being implemented at the expense of employee health. As a result of this event, material handling procedures that assure the safe movement of hazardous chemicals through a security protocol into a radiological control area were developed. Specifically, hazardous material must be transferred using original shipping containers and packaging. While this represents the potential to increase the generation of suspect radioactive waste in a radiological controlled area, arguments are presented that justify this change. Security protocols for accidental releases are also discussed. In summary, the 12th rule of ''Green Chemistry'' (Inherently Safer Chemistry for Accident Prevention) should be followed: the form of a substance used in a chemical process (Movement of Hazardous Chemicals) should be chosen to minimize the potential for chemical accidents, including releases

Waste Issues Associated with the Safe Movement of Hazardous Chemicals

Energy Technology Data Exchange (ETDEWEB)

Dare, J. H.; Cournoyer, M. E.

2002-02-26

Moving hazardous chemicals presents the risk of exposure for workers engaged in the activity and others that might be in the immediate area. Adverse affects are specific to the chemicals and can range from minor skin, eye, or mucous membrane irritation, to burns, respiratory distress, nervous system dysfunction, or even death. A case study is presented where in the interest of waste minimization; original shipping packaging was removed from a glass bottle of nitric acid, while moving corrosive liquid through a security protocol into a Radiological Control Area (RCA). During the transfer, the glass bottle broke. The resulting release of nitric acid possibly exposed 12 employees with one employee being admitted overnight at a hospital for observation. This is a clear example of administrative controls to reduce the generation of suspect radioactive waste being implemented at the expense of employee health. As a result of this event, material handling procedures that assure the safe movement of hazardous chemicals through a security protocol into a radiological control area were developed. Specifically, hazardous material must be transferred using original shipping containers and packaging. While this represents the potential to increase the generation of suspect radioactive waste in a radiological controlled area, arguments are presented that justify this change. Security protocols for accidental releases are also discussed. In summary, the 12th rule of ''Green Chemistry'' (Inherently Safer Chemistry for Accident Prevention) should be followed: the form of a substance used in a chemical process (Movement of Hazardous Chemicals) should be chosen to minimize the potential for chemical accidents, including releases.

Base catalyzed decomposition of toxic and hazardous chemicals

International Nuclear Information System (INIS)

Rogers, C.J.; Kornel, A.; Sparks, H.L.

1991-01-01

There are vast amounts of toxic and hazardous chemicals, which have pervaded our environment during the past fifty years, leaving us with serious, crucial problems of remediation and disposal. The accumulation of polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), ''dioxins'' and pesticides in soil sediments and living systems is a serious problem that is receiving considerable attention concerning the cancer-causing nature of these synthetic compounds.US EPA scientists developed in 1989 and 1990 two novel chemical Processes to effect the dehalogenation of chlorinated solvents, PCBs, PCDDs, PCDFs, PCP and other pollutants in soil, sludge, sediment and liquids. This improved technology employs hydrogen as a nucleophile to replace halogens on halogenated compounds. Hydrogen as nucleophile is not influenced by steric hinderance as with other nucleophile where complete dehalogenation of organohalogens can be achieved. This report discusses catalyzed decomposition of toxic and hazardous chemicals

A handbook of silicate rock analysis

International Nuclear Information System (INIS)

Potts, P.J.

1986-01-01

The topics covered in this handbook include the following: concepts in analytical chemistry; wet chemical and optical spectroscopy methods; X-ray and micro-beam methods; nuclear methods; pre-concentration techniques; and mass spectrometry

Survey of knowledge of hazards of chemicals potentially associated with the advanced isotope separation processes

International Nuclear Information System (INIS)

Chester, R.O.; Kirkscey, K.A.; Randolph, M.L.

1979-09-01

Hazards of chemical potentially associated with the advanced isotope separation processes are estimated based on open literature references. The tentative quantity of each chemical associated with the processes and the toxicity of the chemical are used to estimate this hazard. The chemicals thus estimated to be the most potentially hazardous to health are fluorine, nitric acid, uranium metal, uranium hexafluoride, and uranium dust. The estimated next most hazardous chemicals are bromine, hydrobromic acid, hydrochloric acid, and hydrofluoric acid. For each of these chemicals and for a number of other process-associated chemicals the following information is presented: (1) any applicable standards, recommended standards and their basis; (2) a brief discussion to toxic effects including short exposure tolerance, atmospheric concentration immediately hazardous to life, evaluation of exposures, recommended control procedures, chemical properties, and a list of any toxicology reviews; and (3) recommendations for future research

Survey of knowledge of hazards of chemicals potentially associated with the advanced isotope separation processes

Energy Technology Data Exchange (ETDEWEB)

Chester, R.O.; Kirkscey, K.A.; Randolph, M.L.

1979-09-01

Hazards of chemical potentially associated with the advanced isotope separation processes are estimated based on open literature references. The tentative quantity of each chemical associated with the processes and the toxicity of the chemical are used to estimate this hazard. The chemicals thus estimated to be the most potentially hazardous to health are fluorine, nitric acid, uranium metal, uranium hexafluoride, and uranium dust. The estimated next most hazardous chemicals are bromine, hydrobromic acid, hydrochloric acid, and hydrofluoric acid. For each of these chemicals and for a number of other process-associated chemicals the following information is presented: (1) any applicable standards, recommended standards and their basis; (2) a brief discussion to toxic effects including short exposure tolerance, atmospheric concentration immediately hazardous to life, evaluation of exposures, recommended control procedures, chemical properties, and a list of any toxicology reviews; and (3) recommendations for future research.

Computational Approaches to Chemical Hazard Assessment

Science.gov (United States)

Luechtefeld, Thomas; Hartung, Thomas

2018-01-01

Summary Computational prediction of toxicity has reached new heights as a result of decades of growth in the magnitude and diversity of biological data. Public packages for statistics and machine learning make model creation faster. New theory in machine learning and cheminformatics enables integration of chemical structure, toxicogenomics, simulated and physical data in the prediction of chemical health hazards, and other toxicological information. Our earlier publications have characterized a toxicological dataset of unprecedented scale resulting from the European REACH legislation (Registration Evaluation Authorisation and Restriction of Chemicals). These publications dove into potential use cases for regulatory data and some models for exploiting this data. This article analyzes the options for the identification and categorization of chemicals, moves on to the derivation of descriptive features for chemicals, discusses different kinds of targets modeled in computational toxicology, and ends with a high-level perspective of the algorithms used to create computational toxicology models. PMID:29101769

Handbook of Molecular Force Spectroscopy

CERN Document Server

Noy, Aleksandr

2008-01-01

"...Noy's Handbook of Molecular Force Spectroscopy is both a timely and useful summary of fundamental aspects of molecular force spectroscopy, and I believe it would make a worthwhile addition to any good scientific library. New research groups that are entering this field would be well advisedto study this handbook in detail before venturing into the exciting and challenging world of molecular force spectroscopy." Matthew F. Paige, University of Saskatchewan, Journal of the American Chemical Society Modern materials science and biophysics are increasingly focused on studying and controlling intermolecular interactions on the single-molecule level. Molecular force spectroscopy was developed in the past decade as the result of several unprecedented advances in the capabilities of modern scientific instrumentation, and defines a number of techniques that use mechanical force measurements to study interactions between single molecules and molecular assemblies in chemical and biological systems. Examples of these...

Hazardous chemical and radioactive wastes at Hanford

International Nuclear Information System (INIS)

Keller, J.F.; Stewart, T.L.

1991-07-01

The Hanford Site was established in 1944 to produce plutonium for defense. During the past four decades, a number of reactors, processing facilities, and waste management facilities have been built at Hanford for plutonium production. Generally, Hanford's 100 Area was dedicated to reactor operation; the 200 Area to fuel reprocessing, plutonium recovery, and waste management; and the 300 Area to fuel fabrication and research and development. Wastes generated from these operations included highly radioactive liquid wastes, which were discharged to single- and double-shell tanks; solid wastes, including both transuranic (TRU) and low-level wastes, which were buried or discharged to caissons; and waste water containing low- to intermediate-level radioactivity, which was discharged to the soil column via near-surface liquid disposal units such as cribs, ponds, and retention basins. Virtually all of the wastes contained hazardous chemical as well as radioactive constituents. This paper will focus on the hazardous chemical components of the radioactive mixed waste generated by plutonium production at Hanford. The processes, chemicals used, methods of disposition, fate in the environment, and actions being taken to clean up this legacy are described by location

Hazardous chemical and radioactive wastes at Hanford

International Nuclear Information System (INIS)

Keller, J.F.; Stewart, T.L.

1993-01-01

The Hanford Site was established in 1944 to produce plutonium for defense. During the past four decades, a number of reactors, processing facilities, and waste management facilities were built at Hanford for plutonium production. Generally, Hanford's 100 Area was dedicated to reactor operation; the 200 Areas to fuel reprocessing, plutonium recovery, and waste management; and the 300 Area to fuel fabrication and research and development. Wastes generated from these operations included highly radioactive liquid wastes, which were discharged to single- and double-shell tanks; solid wastes, including both transuranic and low-level wastes, which were buried or discharged to caissons; and waste water containing low- to intermediate-level radioactivity, which was discharged to the soil column via near-surface liquid disposal units such as cribs, ponds, and retention basins. Virtually all of the wastes contained hazardous chemicals as well as radioactive constituents. This paper focuses on the hazardous chemical components of the radioactive mixed waste generated by plutonium production at Hanford. The processes, chemicals used, methods of disposition, fate in the environment, and actions being taken to clean up this legacy are described by location

Applicability of federal and state hazardous waste regulatory programs to waste chemical weapons and chemical warfare agents.; TOPICAL

International Nuclear Information System (INIS)

Haffenden, R.; Kimmell, T.

2002-01-01

This report reviews federal and state hazardous waste regulatory programs that govern the management of chemical weapons or chemical warfare agents. It addresses state programs in the eight states with chemical weapon storage facilities managed by the U.S. Army: Alabama, Arkansas, Colorado, Indiana, Kentucky, Maryland, Oregon, and Utah. It also includes discussions on 32 additional states or jurisdictions with known or suspected chemical weapons or chemical warfare agent presence (e.g., disposal sites containing chemical agent identification sets): Alaska, Arizona, California, Florida, Georgia, Hawaii, Idaho, Illinois, Iowa, Kansas, Louisiana, Massachusetts, Michigan, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, New York, North Carolina, Ohio, Pennsylvania, South Carolina, South Dakota, Tennessee, Texas, the U.S. Virgin Islands, Virginia, Washington, Washington, D.C., and Wyoming. Resource Conservation and Recovery Act (RCRA) hazardous waste programs are reviewed to determine whether chemical weapons or chemical warfare agents are listed hazardous wastes or otherwise defined or identified as hazardous wastes. Because the U.S. Environmental Protection Agency (EPA) military munitions rule specifically addresses the management of chemical munitions, this report also indicates whether a state has adopted the rule and whether the resulting state regulations have been authorized by EPA. Many states have adopted parts or all of the EPA munitions rule but have not yet received authorization from EPA to implement the rule. In these cases, the states may enforce the adopted munitions rule provisions under state law, but these provisions are not federally enforceable

Development of hazard analysis by critical control points (HACCP) procedures to control organic chemical hazards in the agricultural production of raw food commodities.

Science.gov (United States)

Ropkins, Karl; Ferguson, Andrew; Beck, Angus J

2003-01-01

Hazard Analysis by Critical Control Points (HACCP) is a systematic approach to the identification, assessment, and control of hazards in the food chain. Effective HACCP requires the consideration of all chemical microbiological, and physical hazards. However, current procedures focus primarily on microbiological and physical hazards, while chemical aspects of HACCP have received relatively little attention. In this article we discuss the application of HACCP to organic chemical contaminants and the problems that are likely to be encountered in agriculture. We also present generic templates for the development of organic chemical contaminant HACCP procedures for selected raw food commodities, that is, cereal crops,raw meats, and milk.

Decommissioning Handbook

International Nuclear Information System (INIS)

Cusack, J.G.; Dalfonso, P.H.; Lenyk, R.G.

1994-01-01

The Decommissioning Handbook provides technical guidance on conducting decommissioning projects. Information presented ranges from planning logic, regulations affecting decommissioning, technology discussion, health and safety requirements, an developing a cost estimate. The major focus of the handbook are the technologies -- decontamination technologies, waste treatment, dismantling/segmenting/demolition, and remote operations. Over 90 technologies are discussed in the handbook providing descriptions, applications, and advantages/disadvantages. The handbook was prepared to provide a compendium of available or potentially available technologies in order to aid the planner in meeting the specific needs of each decommissioning project. Other subjects presented in the Decommissioning Handbook include the decommissioning plan, characterization, final project configuration based planning, environmental protection, and packaging/transportation. These discussions are presented to complement the technologies presented in the handbook

The situation of hazardous chemical accidents in China between 2000 and 2006

Energy Technology Data Exchange (ETDEWEB)

Duan Weili [Institute of Safety Science and Engineering, South China University of Technology, Guangzhou 510640, Guangdong (China); Chen Guohua, E-mail: scut.safetycenter@gmail.com [Institute of Safety Science and Engineering, South China University of Technology, Guangzhou 510640, Guangdong (China); Ye Qing; Chen Qingguang [Institute of Safety Science and Engineering, South China University of Technology, Guangzhou 510640, Guangdong (China)

2011-02-28

From the aspects of the total quantity of accidents, regional inequality, enterprises scale and environmental pollution accidents, this study makes an analysis of hazardous chemical accidents in China for the period spanning from 2000 to 2006. The following results are obtained: firstly, there were lots of accidents and fatalities in hazardous chemical business, i.e., the number of casualty accidents fluctuated between 200 and 600/year, the number of fatality fluctuated between 220 and 1100/year. Secondly, the accident rate in developed southeast coastal areas, e.g., Guangdong, Zhejiang and Jiangsu, was far higher than that in the northwest regions, e.g., Xizang, Xinjiang, and Qinghai. Thirdly, nearly 80% of dangerous chemical accidents had occurred in small and medium-sized enterprises (SMEs). Finally, various sudden environmental pollution accidents resulted from hazardous chemicals were frequent in recent years, causing a huge damage to human and property. Then, based on the readjustment of economic structure in the last decades, the development status of Occupational Health and Safety (OHS) in SMEs and other factors, the paper explores the main causes, which offers valuable insight into measures that should be taken to reduce hazardous chemical accidents.

The situation of hazardous chemical accidents in China between 2000 and 2006

International Nuclear Information System (INIS)

Duan Weili; Chen Guohua; Ye Qing; Chen Qingguang

2011-01-01

From the aspects of the total quantity of accidents, regional inequality, enterprises scale and environmental pollution accidents, this study makes an analysis of hazardous chemical accidents in China for the period spanning from 2000 to 2006. The following results are obtained: firstly, there were lots of accidents and fatalities in hazardous chemical business, i.e., the number of casualty accidents fluctuated between 200 and 600/year, the number of fatality fluctuated between 220 and 1100/year. Secondly, the accident rate in developed southeast coastal areas, e.g., Guangdong, Zhejiang and Jiangsu, was far higher than that in the northwest regions, e.g., Xizang, Xinjiang, and Qinghai. Thirdly, nearly 80% of dangerous chemical accidents had occurred in small and medium-sized enterprises (SMEs). Finally, various sudden environmental pollution accidents resulted from hazardous chemicals were frequent in recent years, causing a huge damage to human and property. Then, based on the readjustment of economic structure in the last decades, the development status of Occupational Health and Safety (OHS) in SMEs and other factors, the paper explores the main causes, which offers valuable insight into measures that should be taken to reduce hazardous chemical accidents.

The development of the globally harmonized system (GHS) of classification and labelling of hazardous chemicals

International Nuclear Information System (INIS)

Winder, Chris; Azzi, Rola; Wagner, Drew

2005-01-01

The hazards of chemicals can be classified using classification criteria that are based on physical, chemical and ecotoxicological endpoints. These criteria may be developed be iteratively, based on scientific or regulatory processes. A number of national and international schemes have been developed over the past 50 years, and some, such as the UN Dangerous Goods system or the EC system for hazardous substances, are in widespread use. However, the unnecessarily complicated multiplicity of existing hazard classifications created much unnecessary confusion at the user level, and a recommendation was made at the 1992 Rio Earth summit to develop a globally harmonized chemical hazard classification and compatible labelling system, including material safety data sheets and easily understandable symbols, that could be used for manufacture, transport, use and disposal of chemical substances. This became the globally harmonized system for the Classification and Labelling of Chemicals (GHS). The developmental phase of the GHS is largely complete. Consistent criteria for categorising chemicals according to their toxic, physical, chemical and ecological hazards are now available. Consistent hazard communication tools such as labelling and material safety data sheets are also close to finalisation. The next phase is implementation of the GHS. The Intergovernmental Forum for Chemical Safety recommends that all countries implement the GHS as soon as possible with a view to have the system fully operational by 2008. When the GHS is in place, the world will finally have one system for classification of chemical hazards

238 U 92 radionuclide handbook. Natural Uranium and environment

International Nuclear Information System (INIS)

Garnier-Laplace, J.; Colle, C.; Morello, M.

2001-01-01

This handbook summarizes the behaviour of the chemical element in the main compartments of land and aquatic ecosystems, under the two following assumptions: isotopic discrimination is negligible (this is validated for most of the examined elements); when the element possesses stable isotopes, the behaviour analogy between its stable and radioactive isotopes is implicitly admitted, knowing that, for elements existing at the natural state, the chemical form and the emitting media of the anthropic effluents are susceptible of implying other transfer processes than those identified for the natural stable element. The handbook gives information on the chemical and nuclear characteristics of the element, its origins, the concentrations in the environment, the mobility and bio-availability in land ecosystems (soils, plants, animals) and aquatic ecosystems (waters, sediments, plants, animals)

Brazing handbook

CERN Document Server

American Welding Society

2007-01-01

By agreement between the American Welding Society C3 Committee on Brazing and Soldering and the ASM Handbook Committee, the AWS Brazing Handbook has been formally adopted as part of the ASM Handbook Series. Through this agreement, the brazing content in the ASM Handbook is significantly updated and expanded. The AWS Brazing Handbook, 5th Edition provides a comprehensive, organized survey of the basics of brazing, processes, and applications. Addresses the fundamentals of brazing, brazement design, brazing filler metals and fluxes, safety and health, and many other topics. Includes new chapters on induction brazing and diamond brazing.

Transport and Reactivity of Decontaminants to Provide Hazard Mitigation of Chemical Warfare Agents from Materials

Science.gov (United States)

2016-06-01

2013 4. TITLE AND SUBTITLE Transport and Reactivity of Decontaminants to Provide Hazard Mitigation of Chemical Warfare Agents from Materials 5a...directions for future decontamination formulation approaches. 15. SUBJECT TERMS GD HD Decontamination Hazard mitigation VX Chemical warfare agent... DECONTAMINANTS TO PROVIDE HAZARD MITIGATION OF CHEMICAL WARFARE AGENTS FROM MATERIALS 1. INTRODUCTION Decontamination of materials is the

Underground storage tanks containing hazardous chemicals

International Nuclear Information System (INIS)

Wise, R.F.; Starr, J.W.; Maresca, J.W. Jr.; Hillger, R.W.; Tafuri, A.N.

1991-01-01

The regulations issued by the United States Environmental Protection Agency in 1988 require, with several exceptions, that underground storage tank systems containing petroleum fuels and hazardous chemicals be routinely tested for releases. This paper summarizes the release detection regulations for tank systems containing chemicals and gives a preliminary assessment of the approaches to release detection currently being used. To make this assessment, detailed discussions were conducted with providers and manufacturers of leak detection equipment and testing services, owners or operators of different types of chemical storage tank systems, and state and local regulators. While these discussions were limited to a small percentage of each type of organization, certain observations are sufficiently distinctive and important that they are reported for further investigation and evaluation. To make it clearer why certain approaches are being used, this paper also summarizes the types of chemicals being stored, the effectiveness of several leak detection testing systems, and the number and characteristics of the tank systems being used to store these products

Hazardous chemical tracking system (HAZ-TRAC)

International Nuclear Information System (INIS)

Bramlette, J.D.; Ewart, S.M.; Jones, C.E.

1990-07-01

Westinghouse Idaho Nuclear Company, Inc. (WINCO) developed and implemented a computerized hazardous chemical tracking system, referred to as Haz-Trac, for use at the Idaho Chemical Processing Plant (ICPP). Haz-Trac is designed to provide a means to improve the accuracy and reliability of chemical information, which enhances the overall quality and safety of ICPP operations. The system tracks all chemicals and chemical components from the time they enter the ICPP until the chemical changes form, is used, or becomes a waste. The system runs on a Hewlett-Packard (HP) 3000 Series 70 computer. The system is written in COBOL and uses VIEW/3000, TurboIMAGE/DBMS 3000, OMNIDEX, and SPEEDWARE. The HP 3000 may be accessed throughout the ICPP, and from remote locations, using data communication lines. Haz-Trac went into production in October, 1989. Currently, over 1910 chemicals and chemical components are tracked on the system. More than 2500 personnel hours were saved during the first six months of operation. Cost savings have been realized by reducing the time needed to collect and compile reporting information, identifying and disposing of unneeded chemicals, and eliminating duplicate inventories. Haz-Trac maintains information required by the Superfund Amendment Reauthorization Act (SARA), the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) and the Occupational Safety and Health Administration (OSHA)

Hazardous chemical tracking system (HAZ-TRAC)

Energy Technology Data Exchange (ETDEWEB)

Bramlette, J D; Ewart, S M; Jones, C E

1990-07-01

Westinghouse Idaho Nuclear Company, Inc. (WINCO) developed and implemented a computerized hazardous chemical tracking system, referred to as Haz-Trac, for use at the Idaho Chemical Processing Plant (ICPP). Haz-Trac is designed to provide a means to improve the accuracy and reliability of chemical information, which enhances the overall quality and safety of ICPP operations. The system tracks all chemicals and chemical components from the time they enter the ICPP until the chemical changes form, is used, or becomes a waste. The system runs on a Hewlett-Packard (HP) 3000 Series 70 computer. The system is written in COBOL and uses VIEW/3000, TurboIMAGE/DBMS 3000, OMNIDEX, and SPEEDWARE. The HP 3000 may be accessed throughout the ICPP, and from remote locations, using data communication lines. Haz-Trac went into production in October, 1989. Currently, over 1910 chemicals and chemical components are tracked on the system. More than 2500 personnel hours were saved during the first six months of operation. Cost savings have been realized by reducing the time needed to collect and compile reporting information, identifying and disposing of unneeded chemicals, and eliminating duplicate inventories. Haz-Trac maintains information required by the Superfund Amendment Reauthorization Act (SARA), the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) and the Occupational Safety and Health Administration (OSHA).

Handbook of laboratory health and safety measures

International Nuclear Information System (INIS)

Pal, S.B.

1985-01-01

The application of radioactive isotopes and various scientific instruments based on different ionizing and non-ionizing radiation have brought new safety problems to laboratory workers today. Therefore, there is a need to revise present knowledge of safety measures to deal with new hazards, thus broadening the outlook towards health and safety measures for contemporary laboratory staff. This handbook presents a series of articles on current knowledge regarding laboratory safety

Final Hazard Categorization for the Remediation of the 116-C-3 Chemical Waste Tanks

Energy Technology Data Exchange (ETDEWEB)

T. M. Blakley; W. D. Schofield

2007-09-10

This final hazard categorization (FHC) document examines the hazards, identifies appropriate controls to manage the hazards, and documents the commitments for the 116-C-3 Chemical Waste Tanks Remediation Project. The remediation activities analyzed in this FHC are based on recommended treatment and disposal alternatives described in the Engineering Evaluation for the Remediation to the 116-C-3 Chemical Waste Tanks (BHI 2005e).

Radioactivity Handbook

International Nuclear Information System (INIS)

Firestone, R.B.; Browne, E.

1985-01-01

The Radioactivity Handbook will be published in 1985. This handbook is intended primarily for applied users of nuclear data. It will contain recommended radiation data for all radioactive isotopes. Pages from the Radioactivity Handbook for A = 221 are shown as examples. These have been produced from the LBL Isotopes Project extended ENDSF data-base. The skeleton schemes have been manually updated from the Table of Isotopes and the tabular data are prepared using UNIX with a phototypesetter. Some of the features of the Radioactivity Handbook are discussed here

76 FR 72216 - Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of...

Science.gov (United States)

2011-11-22

... accordance with the Standard's definitions for ``laboratory use of hazardous chemicals'' and ``laboratory... using hazardous chemicals; hazard-control techniques; equipment- reliability measures; worker... burden (time and costs) of the information collection requirements, including the validity of the...

Handbook for Policymackers

DEFF Research Database (Denmark)

Jensen, Ulla Højmark

2016-01-01

The purpose of the handbook is to support policy makers / decision makers by enabling them to make informed decisions about funding for second chance education or the adoption of its methods into mainstream education. The Handbook makes policy recommendations and provides guidelines to structure...... a quality assurance system that evidences success factors of second chance education and the value of informal learning. The handbook draws on the results of the literature review, the development of the quality assurance system (SMS system), the Teachers Handbook and the Organisational Handbook...

Application of a hazard and operability study method to hazard evaluation of a chemical unit of the power station.

Science.gov (United States)

Habibi, E; Zare, M; Barkhordari, A; Mirmohammadi, Sj; Halvani, Ghh

2008-12-28

The aim of this study was to identify the hazards, evaluate their risk factors and determine the measure for promotion of the process and reduction of accidents in the chemical unit of the power station. In this case and qualitative study, HAZOP technique was used to recognize the hazards and problems of operations on the chemical section at power station. Totally, 126 deviations were documented with various causes and consequences. Ranking and evaluation of identified risks indicate that the majority of deviations were categorized as "acceptable" and less than half of that were "unacceptable". The highest calculated risk level (1B) related to both the interruption of acid entry to the discharge pumps and an increased density of the acid. About 27% of the deviations had the lowest risk level (4B). The identification of hazards by HAZOP indicates that it could, systemically, assess and criticize the process of consumption or production of acid and alkali in the chemical unit of power plant.

AINSE conference on radiation biology and chemistry. Conference handbook

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

The conference handbook contains 60 oral and poster presentations dealing with recent advances in radiation chemistry applied to biological studies, radiopharmaceuticals, radiosensitizers as well as to solid state chemical physics.

AINSE conference on radiation biology and chemistry. Conference handbook

International Nuclear Information System (INIS)

1994-01-01

The conference handbook contains 60 oral and poster presentations dealing with recent advances in radiation chemistry applied to biological studies, radiopharmaceuticals, radiosensitizers as well as to solid state chemical physics

Child-Specific Exposure Factors Handbook (2008, Final Report)

Science.gov (United States)

The National Center for Environmental Assessment Staff (NCEA) have prepared this handbook to provide information on various physiological and behavioral factors commonly used in assessing children’s exposure to environmental chemicals. Children have different exposure circumstanc...

Assessment and management of cancer risks from radiological and chemical hazards

International Nuclear Information System (INIS)

1998-01-01

A Joint Working Group was established in April 1995 by the President of the Atomic Energy Control Board (AECB) and the Assistant Deputy Minister of the Health Protection Branch of Health Canada to examine the similarities, disparities and inconsistencies between the levels of risk considered acceptable for regulating ionizing radiation and those considered acceptable for regulating chemical and microbiological hazards. During the process of collecting, analysing and interpreting information, the Joint Working Group realized that its terms of reference as written presented a major difficulty because of the lack of consensus on acceptable levels of risk. Consequently it decided that the most reasonable way to proceed was to compare the risk assessment and management processes used to protect the public from radiation, chemicals and microbiological hazards. This report concentrates on the assessment and management of ionizing radiation and genotoxic chemicals (which both cause cancer by damaging the DNA in cells) and pays less attention to non-genotoxic effects and microbiological hazards. The report also examines public more than occupational exposures and exposures from man-made rather than naturally occurring agents. (author)

Handbook of nuclear safeguards measurement methods

International Nuclear Information System (INIS)

Rogers, D.R.

1983-09-01

This handbook is intended to be a guide to the selection of methods for meeting specific measurement requirements. The information was compiled from a survey of production facilities, the literature, and current exchange programs. The survey included bulk measurements, chemical assay, sampling techniques, isotopic measurements, passive NDA, and active NDA

Comparative biological hazards of chemical pollutants and radiation

International Nuclear Information System (INIS)

Mukherjee, R.N.

1978-01-01

Chemical pollutants from conventional energy and industrial sources released to the environment presumably pose a hazard to man's health and environmental resources. Insufficient knowledge of their detailed mechanisms of interaction with the biological systems seems to provide the greatest drawback in current attempts for realistic assessment of the health risks of chemical pollutants in the short and long terms. Nevertheless, their detrimental health consequences are becoming more and more apparent as a result of recent epidemiological surveys of workers in conventional energy installations and of the chronically exposed general public. So far nuclear power has succeeded in achieving a remarkable health safety record. In view of its projected expansion, research on biological effects of low-level radiation and radionuclides should continue to re-evaluate the health safety consequences. However, a projection from past experiences together with continued efforts to improvements of health safety aspects seem to justify an expectation that the proposed expansions in the nuclear power programme should not have an unfavourable impact on the environment. The potential hazards and challenges from the associated radiation in man's environment have proved manageable. More attention now needs to be paid urgently to safeguard human health and environment against the chemical pollutants

Comparative biological hazards of chemical pollutants and radiation

Energy Technology Data Exchange (ETDEWEB)

Mukherjee, R N [International Atomic Energy Agency, Vienna (Austria). Div. of Life Sciences

1978-06-01

Chemical pollutants from conventional energy and industrial sources released to the environment presumably pose a hazard to man's health and environmental resources. Insufficient knowledge of their detailed mechanisms of interaction with the biological systems seems to provide the greatest drawback in current attempts for realistic assessment of the health risks of chemical pollutants in the short and long terms. Nevertheless, their detrimental health consequences are becoming more and more apparent as a result of recent epidemiological surveys of workers in conventional energy installations and of the chronically exposed general public. So far nuclear power has succeeded in achieving a remarkable health safety record. In view of its projected expansion, research on biological effects of low-level radiation and radionuclides should continue to re-evaluate the health safety consequences. However, a projection from past experiences together with continued efforts to improvements of health safety aspects seem to justify an expectation that the proposed expansions in the nuclear power programme should not have an unfavourable impact on the environment. The potential hazards and challenges from the associated radiation in man's environment have proved manageable. More attention now needs to be paid urgently to safeguard human health and environment against the chemical pollutants.

Chemical inventory control program for mixed and hazardous waste facilities at SRS

International Nuclear Information System (INIS)

Ades, M.J.; Vincent, A.M. III.

1997-01-01

Mixed Waste (MW) and Hazardous Waste (HW) are being stored at the Savannah River Site (SRS) pending onsite and/or offsite treatment and disposal. The inventory control for these wastes has recently been brought under Technical Safety Requirements (TSR) in accordance with DOE Order 5480.22. With the TSRs was the question of the degree of rigor with which the inventory is to be tracked, considering that the variety of chemicals present, or that could be present, numbers in the hundreds. This paper describes the graded approach program to track Solid Waste (SW) inventories relative to TSRs. The approach uses a ratio of the maximum anticipated chemical inventory to the permissible inventory in accordance with Emergency Response Planning Guideline (ERPG) limits for on- and off-site receptors. A specific threshold ratio can then be determined. The chemicals above this threshold ratio are to be included in the chemical inventory control program. The chemicals that fall below the threshold ratio are managed in accordance with existing practice per State and RCRA hazardous materials requirements. Additionally, the facilities are managed in accordance with process safety management principles, specifically using process hazards analyses, which provides safety assurance for even the small quantities that may be excluded from the formal inventory control program. The method yields a practical approach to chemical inventory control, while maintaining appropriate chemical safety margins. The resulting number of specific chemicals that require inclusion in a rigorous inventory control program is greatly reduced by about 80%, thereby resulting in significant reduction in chemical data management while preserving appropriate safety margins

Semiconductors data handbook

CERN Document Server

Madelung, Otfried

2004-01-01

This volume Semiconductors: Data Handbook contains frequently used data from the corresponding larger Landolt-Börnstein handbooks in a low price book for the individual scientist working in the laboratory. The Handbook contain important information about a large number of semiconductors

Assessment of chemical loadings to Newark Bay, New Jersey from petroleum and hazardous chemical accidents occurring from 1986 to 1991

International Nuclear Information System (INIS)

Gunster, D.G.; Bonnevie, N.L.; Gillis, C.A.; Wenning, R.J.

1993-01-01

Newark Bay, New Jersey, is particularly vulnerable to ecological damage from accidental petroleum and chemical spills due to the enclosed nature of the bay and the large volume of chemical and petroleum commerce within the region. A review of the New Jersey Department of Environmental Protection and Energy's database of hazardous chemical spills in New Jersey waterways was conducted to determine the frequency and volume of chemical and petroleum spills in Newark Bay and its major tributaries. Accidents reported from 1986 to 1991 were extracted from the database and summarized. The compilation of records indicated that 1400 incidents, resulting in the release of more than 18 million gallons of hazardous materials to the estuary had been reported to state officials. The bulk of the chemicals released to the aquatic environment were petroleum products, specifically No. 2 Fuel Oil (4,636,512 gallons) and No. 6 Fuel Oil (12,600,683 gallons). The majority of the reported incidents occurred in the Arthur Kill and its tributaries. The results indicate that accidental discharge of petroleum and other hazardous chemicals to Newark Bay represents a significant ongoing source of chemical pollution

Application of hazard analysis critical control points (HACCP) to organic chemical contaminants in food.

Science.gov (United States)

Ropkins, K; Beck, A J

2002-03-01

Hazard Analysis Critical Control Points (HACCP) is a systematic approach to the identification, assessment, and control of hazards that was developed as an effective alternative to conventional end-point analysis to control food safety. It has been described as the most effective means of controlling foodborne diseases, and its application to the control of microbiological hazards has been accepted internationally. By contrast, relatively little has been reported relating to the potential use of HACCP, or HACCP-like procedures, to control chemical contaminants of food. This article presents an overview of the implementation of HACCP and discusses its application to the control of organic chemical contaminants in the food chain. Although this is likely to result in many of the advantages previously identified for microbiological HACCP, that is, more effective, efficient, and economical hazard management, a number of areas are identified that require further research and development. These include: (1) a need to refine the methods of chemical contaminant identification and risk assessment employed, (2) develop more cost-effective monitoring and control methods for routine chemical contaminant surveillance of food, and (3) improve the effectiveness of process optimization for the control of chemical contaminants in food.

PSA Review Handbook

International Nuclear Information System (INIS)

Hallman, Anders; Nyman, Ralph; Knochenhauer, Michael

2004-05-01

The Swedish Nuclear Power Inspectorate (SKI) expresses requirements on the performance of PSAs as well as on PSA activities in general in the the regulatory document 'Regulations Concerning Safety in Certain Nuclear Facilities', SKlFS 1998:1. The follow-up of these activities is part of the inspection tasks of the SKI. In view or this, there is a need for documented guidelines on now to perform these inspections and reviews. The SKI PSA Review Handbook is intended to be a support in the SKI inspection and control of the PSA activities or the licensees. These PSA activities include both the organisation and working procedures of the licensee, the layout and contents of the PSA, and its areas of application. Using the regulation SKIFS 1998:1 as a starting point, the review handbook presents important aspects to be considered when judging whether a licensee fulfils the requirements on PSA activities, including the performance of PSA:s or PSA applications. The handbook shall also be a guidance for the review of PSA:s. However, the intention of the PSA Review Handbook is not to be a handbook for how a PSA is performed. The PSA Review Handbook is applicable to all types or initiating events and all operating conditions, and has been structured in a way, which stresses the integrated characteristics of PSA in the creation of the risk picture of a plant. The PSA Review Handbook has been based on the requirements for PSA of nuclear power plants, as this is the most extensive application. However, the relevant parts of it are also applicable when analysing other nuclear installations. The PSA Review Handbook is published as a research report as its contents are judged to be of general interest, and the SKI welcomes comments to the handbook. An update or the PSA Review Handbook may be required as experience with the use of the handbook is acquired and if general PSA requirements change

Environmental impact of industrial sludge stabilization/solidification products: chemical or ecotoxicological hazard evaluation?

Science.gov (United States)

Silva, Marcos A R; Testolin, Renan C; Godinho-Castro, Alcione P; Corrêa, Albertina X R; Radetski, Claudemir M

2011-09-15

Nowadays, the classification of industrial solid wastes is not based on risk analysis, thus the aim of this study was to compare the toxicity classifications based on the chemical and ecotoxicological characterization of four industrial sludges submitted to a two-step stabilization/solidification (S/S) processes. To classify S/S products as hazardous or non-hazardous, values cited in Brazilian chemical waste regulations were adopted and compared to the results obtained with a battery of biotests (bacteria, alga and daphnids) which were carried out with soluble and leaching fractions. In some cases the hazardous potential of industrial sludge was underestimated, since the S/S products obtained from the metal-mechanics and automotive sludges were chemically classified as non-hazardous (but non-inert) when the ecotoxicity tests showed toxicity values for leaching and soluble fractions. In other cases, the environmental impact was overestimated, since the S/S products of the textile sludges were chemically classified as non-inert (but non-hazardous) while ecotoxicity tests did not reveal any effects on bacteria, daphnids and algae. From the results of the chemical and ecotoxicological analyses we concluded that: (i) current regulations related to solid waste classification based on leachability and solubility tests do not ensure reliable results with respect to environmental protection; (ii) the two-step process was very effective in terms of metal immobilization, even at higher metal-concentrations. Considering that S/S products will be subject to environmental conditions, it is of great interest to test the ecotoxicity potential of the contaminants release from these products with a view to avoiding environmental impact given the unreliability of ecotoxicological estimations originating from chemical analysis. Copyright © 2011 Elsevier B.V. All rights reserved.

Environmental and health hazard ranking and assessment of plastic polymers based on chemical composition

Energy Technology Data Exchange (ETDEWEB)

Lithner, Delilah, E-mail: delilah.lithner@gmail.com; Larsson, Ake; Dave, Goeran

2011-08-15

Plastics constitute a large material group with a global annual production that has doubled in 15 years (245 million tonnes in 2008). Plastics are present everywhere in society and the environment, especially the marine environment, where large amounts of plastic waste accumulate. The knowledge of human and environmental hazards and risks from chemicals associated with the diversity of plastic products is very limited. Most chemicals used for producing plastic polymers are derived from non-renewable crude oil, and several are hazardous. These may be released during the production, use and disposal of the plastic product. In this study the environmental and health hazards of chemicals used in 55 thermoplastic and thermosetting polymers were identified and compiled. A hazard ranking model was developed for the hazard classes and categories in the EU classification and labelling (CLP) regulation which is based on the UN Globally Harmonized System. The polymers were ranked based on monomer hazard classifications, and initial assessments were made. The polymers that ranked as most hazardous are made of monomers classified as mutagenic and/or carcinogenic (category 1A or 1B). These belong to the polymer families of polyurethanes, polyacrylonitriles, polyvinyl chloride, epoxy resins, and styrenic copolymers. All have a large global annual production (1-37 million tonnes). A considerable number of polymers (31 out of 55) are made of monomers that belong to the two worst of the ranking model's five hazard levels, i.e. levels IV-V. The polymers that are made of level IV monomers and have a large global annual production (1-5 million tonnes) are phenol formaldehyde resins, unsaturated polyesters, polycarbonate, polymethyl methacrylate, and urea-formaldehyde resins. This study has identified hazardous substances used in polymer production for which the risks should be evaluated for decisions on the need for risk reduction measures, substitution, or even phase out

Mechanical engineer's handbook

CERN Document Server

Marghitu, Dan B

2001-01-01

The Mechanical Engineer's Handbook was developed and written specifically to fill a need for mechanical engineers and mechanical engineering students throughout the world. With over 1000 pages, 550 illustrations, and 26 tables the Mechanical Engineer's Handbook is very comprehensive, yet affordable, compact, and durable. The Handbook covers all major areas of mechanical engineering with succinct coverage of the definitions, formulas, examples, theory, proofs, and explanations of all principle subject areas. The Handbook is an essential, practical companion for all mechanic

Technical handbook on the National Arrangements for Incidents involving Radioactivity. NAIR technical handbook

International Nuclear Information System (INIS)

McColl, N.P.; Kruse, P.

2002-01-01

This Technical Handbook contains information for radiation specialists participating in the National Arrangements for Incidents involving Radioactivity (NAIR). Together with the NAIR Users Handbook 2000 edition, it updates and replaces the NAIR Handbook published in 1995. The Users Handbook was designed for those who might seek assistance through NAIR, principally the police or other emergency services. Both Handbooks are reproduced on the NRPB website (www.nrpb.org) and are available from NRPB

OSHA safety requirements for hazardous chemicals in the workplace.

Science.gov (United States)

Dohms, J

1992-01-01

This article outlines the Occupational Safety and Health Administration (OSHA) requirements set forth by the Hazard Communication Standard, which has been in effect for the healthcare industry since 1987. Administrators who have not taken concrete steps to address employee health and safety issues relating to hazardous chemicals are encouraged to do so to avoid the potential of large fines for cited violations. While some states administer their own occupational safety and health programs, they must adopt standards and enforce requirements that are at least as effective as federal requirements.

Environmental Product Development Combining the Life Cycle Perspective with Chemical Hazard Information

DEFF Research Database (Denmark)

Askham, Cecilia

in the design or redesign process. This thesis concerns marrying the life cycle perspective with chemical hazard information, in order to advance the practice of environmental product development, and hence takes further steps towards sustainable development. The need to consider the full value chain...... for the life cycle of products meant that systems theory and systems engineering principles were important in this work. Life cycle assessment methodology was important for assessing environmental impacts for case products. The new European regulation for chemicals (REACH) provided the main driver......Concerns regarding the short- and long-term detrimental effects of chemicals on human health and ecosystems have made the minimisation of chemical hazards a vitally important issue. If sustainable development is to be achieved, environmental efficient products (and product life cycles...

Perspectives on the chemical and radiological hazards of uranium

International Nuclear Information System (INIS)

Stansbury, P.S.

1987-01-01

Uranium is unique among the elements because it presents chemical and radiological hazards of comparable magnitude. Although the biological effects of a heavy metal damaging the kidneys are vastly different from the actions of an alpha-emitting nuclide in the lung or bone tissues, there are some perceptual and phenomenological similarities of note to health physicists. In a broad sense, the amount of uranium that could cause chemical kidney damage or pose a radiation hazard could go unnoticed in the work place. Once taken into the body, the chemical action or the radiological insult progresses without any warning signals. Ultrasensitive bioassay techniques could detect the presence of uranium in the body and quantify an intake that is known to have occurred. The adverse health effect of either the chemical or radiological mode of action is catastrophic: kidney failure on one hand, cancer on the other. Two other parallelisms should be noted. The natural loss of nephrons is part of the aging process. Similarly 15 to 20% of the population die of naturally caused cancer. Thus, the effects of uranium exposure mimic natural effects in unexposed populations. There are suspected adverse health effects at low levels of exposure to uranium. Even though there may be good reasons for suspecting low-level effects, both chemical and radiological, there is very little definitive evidence that these effects occur in human populations. 7 refs., 1 fig., 1 tab

Toxic chemical hazard classification and risk acceptance guidelines for use in DOE facilities. Revision 2

International Nuclear Information System (INIS)

Craig, D.K.; Davis, J.S.; Prowse, J.; Hoffman, P.W.

1995-01-01

The concentration-limit guidelines presented in this document apply to airborne releases of chemicals evaluated with respect to human health effects for the purposes of hazard classification and categorization, risk assessment and safety analysis. They apply to all DOE facilities and operations involving the use of potentially hazardous chemicals. The guidelines do not address other nonradiological hazards such as fire, pressure releases (including explosions), and chemical reactivity, but the guidelines are applicable to hazardous chemical releases resulting from these events. This report presents the subcommittee's evaluation and recommendations regarding analyses of accidentally released toxic chemicals. The premise upon which these recommendations are based is that the mechanism of action of toxic chemicals is fundamentally different from that associated with radionuclides, with the exception of carcinogens. The recommendations reported herein are restricted to the airborne pathway because in an accident scenario this typically represents the most immediately significant route of public exposure. However, the subcommittee recognizes that exposure to chemicals through other pathways, in particular waterborne, can have significant impacts on human health and the environment. Although there are a number of chemicals for which absorption through the skin can contribute measurably to the total dose in chronic (e.g., occupational) exposure situations, this pathway has not been considered for the acute exposure scenarios considered in this report. Later studies. will address these issues if it appears desirable

Radiation safety. Handbook for laboratory workers in the USA

International Nuclear Information System (INIS)

Hotte, E.D.; Krueger, D.J.; Connor, K.

2000-01-01

The aim of the Handbook is to provide a source of information on radiation safety for those who are involved in the use of ionizing radiation in the laboratory. The potential reader may be a laboratory worker in the university or biomedical setting or the safety professional who desires a basic understanding of radiation protection within the research environment. The Handbook may be used as a reference by the radiation protection specialist or Radiation Safety Officer. To this end, liberal use is made of Appendices to make the Handbook a source of reference for a wide spectrum of readership while avoiding complicating the main body of the text. Each chapter or appendix is designed to stand alone. A complete reading of the Handbook will show that topics may be covered more than once. For example, one may read about the hazards and protective measures on handling radioiodine in Chapter 5 on Practical Radiation Protection as well as in Appendix 19 on Safe Handling of 125 I. Extensive use of figures, rather than tables has been made to present data, in the belief that these produce a good visual representation to a level of precision which is sufficient for most purposes of radiation protection in laboratories. The reader must remember that this Handbook should be taken as a guide only to the applicable regulations. You must consult the appropriate state or federal regulation directly or receive advice of a qualified radiation safety professional. Also, some information in the Appendices, such as commercially available training institutions or radioactive waste brokers, may change with time. Telephone numbers are given for the reader to call directly and check the services provided

75 FR 5317 - Exposure Factors Handbook: 2009 Update

Science.gov (United States)

2010-02-02

... chemicals. These factors include: Drinking water consumption; mouthing behavior; soil ingestion rates... document solely for the purpose of pre- dissemination peer review under applicable information quality... various factors used in assessing human exposure. This Handbook is aimed at exposure assessors inside the...

Supplement report to the Nuclear Criticality Safety Handbook of Japan

International Nuclear Information System (INIS)

Okuno, Hiroshi; Komuro, Yuichi; Nakajima, Ken

1995-10-01

Supplementing works to 'The Nuclear Criticality Safety Handbook' of Japan have been continued since 1988, the year the handbook edited by the Science and Technology Agency first appeared. This report publishes the fruits obtained in the supplementing works. Substantial improvements are made in the chapters of 'Modelling the evaluation object' and 'Methodology for analytical safety assessment', and newly added are chapters of 'Criticality safety of chemical processes', 'Criticality accidents and their evaluation methods' and 'Basic principles on design and installation of criticality alarm system'. (author)

Guidelines for generators of hazardous chemical waste at LBL and guidelines for generators of radioactive and mixed waste at LBL

International Nuclear Information System (INIS)

1993-10-01

The purpose of this document is to provide the acceptance criteria for the transfer of hazardous chemical waste to LBL's Hazardous Waste Handling Facility (HWHF). Hazardous chemical waste is a necessary byproduct of LBL's research and technical support activities. This waste must be handled properly if LBL is to operate safely and provide adequate protection to staff and the environment. These guidelines describe how you, as a generator of hazardous chemical waste, can meet LBL's acceptance criteria for hazardous chemical waste

Evaluation of Hazardous Material Management Safety in the Chemical Laboratory in BATAN

International Nuclear Information System (INIS)

Nur-Rahmah-Hidayati

2005-01-01

The management safety of the hazardous material (B3) in the chemical laboratory of BATAN was evaluated. The evaluation is necessary to be done because B3 is often used together with radioactive materials in the laboratory, but the attention to the safety aspect of B3 is not paid sufficiently in spite of its big potential hazard. The potential hazard generated from the nature of B3 could be flammable, explosive, oxidative, corrosive and poisonous. The handling of B3 could be conducted by enforcing the labelling and classification in the usage and disposal processes. Some observations of the chemical laboratory of BATAN show that the management safety of hazardous material in compliance with the government regulation no. 74 year 2001 has not been dully conducted. The management safety of B3 could be improved by, designating one who has adequate skill in hazardous material safety specially as the B3 safety officer, providing the Material Safety Data Sheet that is updated periodically to use in the laboratory and storage room, updating periodically the inventory of B3, performing training in work safety periodically, and monitoring the ventilation system intensively in laboratory and storage room. (author)

Occupational health hazards in veterinary medicine: physical, psychological, and chemical hazards.

Science.gov (United States)

Epp, Tasha; Waldner, Cheryl

2012-02-01

This paper reports physical, psychological, and chemical hazards relevant to western Canadian veterinarians as obtained by a self-administered mailed questionnaire. Nine-three percent (750/806) of veterinarians reported some form of injury during the previous 5 years; 17% of respondents (131/791) indicated injuries that resulted in 1 or more days off work. Median stress levels were similar across work environments; overall, 7% (57/813) indicated either no stress or severe stress, while 53% (428/813) indicated moderate stress. Twenty percent (3/15) of food animal practitioners and 37% (114/308) of companion animal practitioners who took X-rays reported accidental exposure. Accidental exposure to gas anesthetic was reported by 69% (394/570) of those in private practice. Exposure to chemicals occurred in all work environments. Veterinarians in western Canada are at risk of minor to severe injury due to both animal and non-animal related causes.

The OSHA hazardous chemical occupational exposure standard for laboratories.

Science.gov (United States)

Armbruster, D A

1991-01-01

OSHA's chemical occupational exposure standard for laboratories is an outgrowth of the previously issued Hazard Communication Standard. The standard relieves laboratories from complying with general industry standards but does require compliance with specific laboratory guidelines. The heart of the standard is the creation of a Chemical Hygiene Plan (CHP). The CHP addresses major issues such as safety equipment and procedures, work practices, training, the designation of a chemical hygiene officer, and the provision of medical consultation and examination for affected employees. This new standard, in full effect as of January 31, 1991, presents yet another regulatory challenge to laboratory managers but also ensures a safer environment for laboratory workers.

Handbook of proton-NMR spectra and data index

CERN Document Server

Asahi Research Center Co, Ltd

2013-01-01

Handbook of Proton-NMR Spectra and Data: Index to Volumes 1-10 compiles four types of indexes used in charting the proton-NMR spectral database -Chemical Name Index, Molecular Formula Index, Substructure Index, and Chemical Shift Index. The Chemical Name Index compiles all chemical names in alphabetical order, followed by a spectrum number. When the desired organic compound cannot be found in the Chemical Name Index or its nomenclature is unclear, it becomes necessary to look for a compound by means of its molecular formula, hence the Molecular Formula Index. A unique notation system for repre

An approach to quantitate and control the mutagenic hazards of environmental chemical and radioactive pollutants

International Nuclear Information System (INIS)

Murthy, M.S.S.

1977-01-01

Human population, both at the occupational and non-occupational levels, is exposed to the environment polluted by man-made chemicals and radiation sources. The parameters required for quantitating mutagenic hazards of any agent are listed and it has been pointed out that though sufficient information of this nature is available in the case of radiations, it is almost impossible to collect similar information for chemical substances due to their number running into astronomical figures. A short-cut approach, therefore, is suggested to quantitate and control the mutagenic hazards of these pollutants. It is to express the mutagenic hazards of a chemical substance in terms of equivalent radiation units. The unit proposed for this purpose is called as Rem-Equivalent Chemical (REC). Total mutagenic burden to the society should take account of exposure from both chemicals and radiations. Advantages and limitation of this approach are discussed. (M.G.B.)

How synergistic or antagonistic effects may influence the mutual hazard ranking of chemicals

Directory of Open Access Journals (Sweden)

Lars Carlsen

2015-04-01

Full Text Available The presence of various agents, including humic materials, nanomaterials, microplastics, or simply specific chemical compounds, may cause changes in the apparent persistence, bioaccumulation, and/or toxicity (PBT of a chemical compound leading to an either increased or decreased PBT characteristics and thus an increased or decreased hazard evaluation. In the present paper, a series chloro-containing obsolete pesticides is studied as an illustrative example. Partial order methodology is used to quantify how changed P, B, or T characteristics of methoxychlor (MEC influences the measure of the hazard of MEC, relative to the other 11 compounds in the series investigated. Not surprisingly, an increase in one of the three indicators (P, B, or T lead to an increased average order and thus an increased relative hazard as a result of a synergistic effect. A decrease in one of the indicator values analogously causes a decreased average order/relative hazard through an antagonistic effect; the effect, however, being less pronounced. It is further seen that the effect of changing the apparent value of the three indicators is different. Thus, persistence apparently is more important that bioaccumulation which again appears more important than toxicity, which is in agreement with previous work. The results are discussed with reference to the European chemicals framework on registration, evaluation and authorization of chemicals (REACH framework.

KNOWLEDGE DATABASE ON CHEMICAL AND AEROSOL HAZARDS CHEMPYŁ AVAILABLE IN CIOP-PIB PORTAL

Directory of Open Access Journals (Sweden)

Elżbieta Dobrzyńska

2016-12-01

Full Text Available CHEMPYŁ database, which is available on the website of the Central Institute for Labour Protection – National Research Institute, is a source of information for employers, employees and specialists of health and safety in the field of chemical and aerosol hazards at the workplace. The most useful materials in this field, collected in one place in the database are aimed to help in the efficient management of occupational risks associated with the presence of hazardous chemical substances and its mixtures in the working environment. The online CHEMPYŁ database contains sets of definitions, legal acts, database of hazardous chemicals and dusts, as well as the measurement results in form of sixteen separate sections and subsections. The database of measurement results is a collection of practical information on exposure to harmful chemical substances, the results of their qualitative and quantitative measurements in air at the exemplary workplaces or exemplary technological processes from various economy sectors and occupational risk assessment connected with it. The database on hazardous chemicals covers over five hundred and sixty substances, mainly with fixed values of maximum admissible concentrations in Poland, but also more than a thousand substances classified as carcinogenic and mutagenic according to the CLP Regulation, and this material is continuously expanded. Extensive materials are collected in the sections on assessment of occupational exposure to chemicals and dust, as well as risk assessment associated with their use and/or presence at the workplace. Apart from the materials on risk assessment in inhalation and dermal exposure or risk of explosion and fire, data were complemented with non-measurement methods for assessing exposure and occupational risk for carcinogenic and mutagenic substances, and methods to assess the risks associated with chemical substances of nanometric dimensions. Forum, which was created in 2015, allows

Hazardous chemicals in marine mammals from the western North Pacific

International Nuclear Information System (INIS)

Miyazaki, N.; Tanabe, S.

1999-01-01

Marine mammals have long-term life and occupy the highest ecological niche in the marine ecosystem. Thus, higher concentration of hazardous chemicals are expected in marine mammals. In the present study, we review contamination of organochlorine compounds (DDTs, PCBs, HCHs, etc.), heavy metals (Hg, Cd, Pb, etc.) and butyltin (TBT, DBT and MBT) in marine mammals collected from the western North Pacific, and discuss the worldwide contamination of these chemicals

Gen IV Materials Handbook Functionalities and Operation (2B) Handbook Version 2.0

International Nuclear Information System (INIS)

Ren, Weiju

2011-01-01

This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

Gen IV Materials Handbook Functionalities and Operation (4A) Handbook Version 4.0

Energy Technology Data Exchange (ETDEWEB)

Ren, Weiju [ORNL

2013-09-01

This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

Gen IV Materials Handbook Functionalities and Operation (2B) Handbook Version 2.0

Energy Technology Data Exchange (ETDEWEB)

Ren, Weiju [ORNL

2011-08-01

This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

High-risk facilities. Emergency management in nuclear, chemical and hazardous waste facilities

International Nuclear Information System (INIS)

Kloepfer, Michael

2012-01-01

The book on emergency management in high-risk facilities covers the following topics: Change in the nuclear policy, risk management of high-risk facilities as a constitutional problem - emergency management in nuclear facilities, operational mechanisms of risk control in nuclear facilities, regulatory surveillance responsibilities for nuclear facilities, operational mechanism of the risk control in chemical plants, regulatory surveillance responsibilities for chemical facilities, operational mechanisms of the risk control in hazardous waste facilities, regulatory surveillance responsibilities for hazardous waste facilities, civil law consequences in case of accidents in high-risk facilities, criminal prosecution in case of accidents in high-risk facilities, safety margins as site risk for emission protection facilities, national emergency management - strategic emergency management structures, warning and self-protection of the public in case of CBRN hazards including aspects of the psych-social emergency management.

Risk assessment of chemicals in food and diet: Hazard identification by methods of animal-based toxicology

DEFF Research Database (Denmark)

Barlow, S. M.; Greig, J. B.; Bridges, J. W.

2002-01-01

the current state of the science of risk assessment of chemicals in food and diet, by consideration of the four stages of risk assessment, that is. hazard identification. hazard characterisation, exposure assessment and risk characterisation. The contribution of animal-based methods in toxicology to hazard......, on hazard identification for food chemicals, such as new measurement techniques, the use of transgenic animals, assessment of hormone balance and the possibilities for conducting studies in which common human diseases have been modelled. is also considered. (C) 2002 ILSI. Published by Elsevier Science Ltd....... All rights reserved....

ThermoDex An index of selected thermodynamic data handbooks

CERN Document Server

This database contains records for printed handbooks and compilations of thermodynamic and thermophysical data for chemical compounds and other substances. You can enter both a type of compound and a property, and ThermoDex will return a list of hand

Crane handbook

CERN Document Server

Dickie, D E

1975-01-01

Crane Handbook offers extensive advice on how to properly handle a crane. The handbook highlights various safety requirements and rules. The aim of the book is to improve the readers' crane operating skills, which could eventually make the book a standard working guide for training operators. The handbook first reminds the readers that the machine should be carefully tested by a regulatory board before use. The text then notes that choosing the right crane for a particular job is vital and explains why this is the case. It then discusses how well-equipped and durable the crane should be. T

Hazard Assessment of Chemical Air Contaminants Measured in Residences

Energy Technology Data Exchange (ETDEWEB)

Logue, J.M.; McKone, T.E.; Sherman, M. H.; Singer, B.C.

2010-05-10

Identifying air pollutants that pose a potential hazard indoors can facilitate exposure mitigation. In this study, we compiled summary results from 77 published studies reporting measurements of chemical pollutants in residences in the United States and in countries with similar lifestyles. These data were used to calculate representative mid-range and upper bound concentrations relevant to chronic exposures for 267 pollutants and representative peak concentrations relevant to acute exposures for 5 activity-associated pollutants. Representative concentrations are compared to available chronic and acute health standards for 97 pollutants. Fifteen pollutants appear to exceed chronic health standards in a large fraction of homes. Nine other pollutants are identified as potential chronic health hazards in a substantial minority of homes and an additional nine are identified as potential hazards in a very small percentage of homes. Nine pollutants are identified as priority hazards based on the robustness of measured concentration data and the fraction of residences that appear to be impacted: acetaldehyde; acrolein; benzene; 1,3-butadiene; 1,4-dichlorobenzene; formaldehyde; naphthalene; nitrogen dioxide; and PM{sub 2.5}. Activity-based emissions are shown to pose potential acute health hazards for PM{sub 2.5}, formaldehyde, CO, chloroform, and NO{sub 2}.

[Exposure to hazardous chemical substances in furniture industry].

Science.gov (United States)

Pośniak, Małgorzata; Kowalska, Joanna; Makhniashvili, Ivan

2005-01-01

The aim of the study was to assess the exposure to organic solvents in plants of the furniture industry. Studies were conducted in five furniture plants. Hazardous chemicals present in the air at workposts were determined by capillary gas chromatography with mass spectrometry and flame ionization detection. The analysis of air samples collected at the workposts allowed to identify the following chemicals occurring during varnishing and cleaning of furniture surface elements: acetone, butan-2-one, ethyl, isobutyl and methoxypropyl acetate, 4-methylpentan-2-on, toluene, ethylbenzene and xylenes. Indices characteristic of combined exposure ranged from 0.13 to 1.67 and exceeded the limit value at 21% of workposts. The results of the study indicate that chemicals present at representative workposts during the furniture production are harmful to health of workers, especially those involved in varnishing and cleaning of furniture elements.

Controlled air incineration of hazardous chemical and mixed waste at Los Alamos

International Nuclear Information System (INIS)

Borduin, L.C.; Hutchins, D.A.; Vavruska, J.J.; Warner, C.L.

1987-01-01

The Los Alamos National Laboratory (LANL) Controlled Air Incineration (CAI) system, originally developed for transuranic (TRU) waste volume reduction studies, is currently being qualified for hazardous chemical and mixed waste treatment under provisions of the Resource Conservation and Recovery Act (RCRA). The objective is to obtain a permanent RCRA Part B permit for thermal disposal of hazardous and mixed wastes generated by LANL. Constructed in the mid-1970s as a demonstration project for incineration of TRU solid wastes, the CAI process was substantially modified and tested in 1980-1983 for acceptance of both liquid and solid hazardous chemicals. Successful demonstration of TRU solid waste processing objectives in 1979 and later chemical waste incineration studies have been documented in several publications. In 1984, the LANL CAI became the first US Dept. of Energy (DOE) incinerator to be permitted for polychlorinated biphenyl disposal under the Toxic Substances Control Act. Following establishment of Environmental Protection Agency (EPA) jurisdiction over DOE chemical waste management in 1984, LANL sought and was granted interim status for the CAI and applied for a trial burn permit in the overall laboratory RCRA Part B application. A trial burn and final report have been completed; results have been submitted to EPA and the New Mexico Environmental Improvement Division. This paper provides an overview of trial burn planning and results together with the operational status of LANL's CAI

Onshore preparedness for hazardous chemical marine vessel accidents: A case study

Directory of Open Access Journals (Sweden)

Faisel T. Illiyas

2016-09-01

Full Text Available Hazardous and noxious substances (HNS are widely transported in marine vessels to reach every part of the world. Bulk transportation of hazardous chemicals is carried out in tank container–carrying cargo ships or in designed vessels. Ensuring the safety of HNS containers during maritime transportation is critically important as the accidental release of any substance may be lethal to the on-board crew and marine environment. A general assumption in maritime accidents in open ocean is that it will not create any danger to the coastal population. The case study discussed in this article throws light on the dangers latent in maritime HNS accidents. An accident involving an HNS-carrying marine vessel in the Arabian Sea near the coast of Yemen became a safety issue to the coastal people of Kasargod District of Kerala, India. The ship carried more than 4000 containers, which were lost to the sea in the accident. Six HNS tank containers were carried by the waves and shored at the populated coast of Kasargod, more than 650 nautical miles east from the accident spot. The unanticipated sighting of tank containers in the coast and the response of the administration to the incident, the hurdles faced by the district administration in handling the case, the need for engaging national agencies and lessons learned from the incident are discussed in the article. This case study has proven that accidents in the open ocean have the potential to put the coastal areas at risk if the on-board cargo contains hazardous chemicals. Littoral nations, especially those close to the international waterlines, must include hazardous chemical spills to their oil spill contingency plans.

Employee Handbook

Energy Technology Data Exchange (ETDEWEB)

Bello, Madelyn

2008-09-05

Welcome to Berkeley Lab. You are joining or are already a part of a laboratory with a sterling tradition of scientific achievement, including eleven Nobel Laureates and thirteen National Medal of Science winners. No matter what job you do, you make Berkeley Lab the outstanding organization that it is. Without your hard work and dedication, we could not achieve all that we have. We value you and thank you for choosing to be part of our community. This Employee Handbook is designed to help you navigate the Lab. With over 3,000 employees, an additional 3,000 guests visiting from countries around the world, a 200-acre campus and many policies and procedures, learning all the ins and outs may seem overwhelming, especially if you're a new employee. However, even if you have been here for a while, this Handbook should be a useful reference tool. It is meant to serve as a guide, highlighting and summarizing what you need to know and informing you where you can go for more detailed information. The general information provided in this Handbook serves only as a brief description of many of the Lab's policies. Policies, procedures and information are found in the Lab's Regulations and Procedures Manual (RPM), Summary Plan Descriptions, University of California policies, and provisions of Contract 31 between the Regents of the University and the U.S. Department of Energy. In addition, specific terms and conditions for represented employees are found in applicable collective bargaining agreements. Nothing in this Handbook is intended to supplant, change or conflict with the previously mentioned documents. In addition, the information in this Handbook does not constitute a contract or a promise of continued employment and may be changed at any time by the Lab. We believe employees are happier and more productive if they know what they can expect from their organization and what their organization expects from them. The Handbook will familiarize you with the

78 FR 4324 - Occupational Exposure to Hazardous Chemicals in Laboratories (Non-Mandatory Appendix); Technical...

Science.gov (United States)

2013-01-22

... variety of physical and chemical reasons, reaction scale-ups pose special risks, which merit additional.... Engineering controls, such as chemical hoods, physically separate the employee from the hazard. Administrative..., engineering controls and apparel; (d) Laboratory equipment; (e) Safety equipment; (f) Chemical management; (g...

Standing operating procedures for developing acute exposure guideline levels for hazardous chemicals

National Research Council Canada - National Science Library

National Research Council (U.S.). Subcommittee on Acute Exposure Guideline Levels

2001-01-01

Standing Operating Procedures for Developing Acute Exposure Guideline Levels for Hazardous Chemicals contains a detailed and comprehensive methodology for developing acute exposure guideline levels (AEGLs...

77 FR 66638 - The Standard on Process Safety Management of Highly Hazardous Chemicals; Extension of the Office...

Science.gov (United States)

2012-11-06

... Standard on Process Safety Management of Highly Hazardous Chemicals; Extension of the Office of Management...) approval of the information collection requirements specified in the Standard on Process Safety Management...: The Standard on Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119). OMB Number...

Metallic Fuels Handbook

Energy Technology Data Exchange (ETDEWEB)

Janney, Dawn E. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Papesch, Cynthia A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Burkes, Douglas E. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cole, James I. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Fielding, Randall S. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Frank, Steven M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hartmann, Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hyde, Timothy A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Keiser, Jr., Dennis D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Kennedy, J. Rory [Idaho National Lab. (INL), Idaho Falls, ID (United States); Maddison, Andrew [Idaho National Lab. (INL), Idaho Falls, ID (United States); Mariani, Robert D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Middlemas, Scott C. [Idaho National Lab. (INL), Idaho Falls, ID (United States); O' Holleran, Thomas P. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sencer, Bulent H. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Squires, Leah N. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-08-07

This is not a typical External Report--It is a Handbook. No Abstract is involved. This includes both Parts 1 and 2. The Metallic Fuels Handbook summarizes currently available information about phases and phase diagrams, heat capacity, thermal expansion, and thermal conductivity of elements and alloys in the U-Pu-Zr-Np-Am-La-Ce-Pr-Nd system. Although many sections are reviews and updates of material in previous versions of the Handbook [1, 2], this revision is the first to include alloys with four or more elements. In addition to presenting information about materials properties, the handbook attempts to provide information about how well each property is known and how much variation exists between measurements. Although it includes some results from models, its primary focus is experimental data.

Decontamination and management of human remains following incidents of hazardous chemical release.

Science.gov (United States)

Hauschild, Veronique D; Watson, Annetta; Bock, Robert

2012-01-01

To provide specific guidance and resources for systematic and orderly decontamination of human remains resulting from a chemical terrorist attack or accidental chemical release. A detailed review and health-based decision criteria protocol is summarized. Protocol basis and logic are derived from analyses of compound-specific toxicological data and chemical/physical characteristics. Guidance is suitable for civilian or military settings where human remains potentially contaminated with hazardous chemicals may be present, such as sites of transportation accidents, terrorist operations, or medical examiner processing points. Guidance is developed from data-characterizing controlled experiments with laboratory animals, fabrics, and materiel. Logic and specific procedures for decontamination and management of remains, protection of mortuary affairs personnel, and decision criteria to determine when remains are sufficiently decontaminated are presented. Established procedures as well as existing materiel and available equipment for decontamination and verification provide reasonable means to mitigate chemical hazards from chemically exposed remains. Unique scenarios such as those involving supralethal concentrations of certain liquid chemical warfare agents may prove difficult to decontaminate but can be resolved in a timely manner by application of the characterized systematic approaches. Decision criteria and protocols to "clear" decontaminated remains for transport and processing are also provided. Once appropriate decontamination and verification have been accomplished, normal procedures for management of remains and release can be followed.

Handbook of energy

CERN Document Server

Cleveland, Cutler J

2013-01-01

Handbook of Energy, Volume II: Chronologies, Top Ten Lists, and Word Clouds draws together a comprehensive account of the energy field from the prestigious and award-winning authors of the Encyclopedia of Energy (2004), The Dictionary of Energy, Expanded Edition (2009), and the Handbook of Energy, Volume I (2013). Handbook of Energy, Volume II takes the wealth of information about historical aspects of energy spread across many books, journals, websites, disciplines, ideologies, and user communities and synthesizes the information in one central repository. This book meets the needs of a di

an investigation of the health hazards of some of the chemical ...

African Journals Online (AJOL)

Temechegn

This short piece takes a limited look at the health hazards of the chemical contents of ... With this in mind, the researchers purchased all the powdered fruit juices sold in ... Administration (FDA) or some other regulatory body for low toxicity, ...

Radioactive and hazardous chemical wastes. Impact on man and his environment

International Nuclear Information System (INIS)

Parker, F.L.; Suess, M.J.

1984-01-01

The main objective of the various safety measures in all fields of human activities is to prevent deleterious effects of various agents on human health. Preventive health and safety measures therefore play an important role in achieving the main goal of the World Health Organization (WHO): 'Health for all by the year 2000'. The present WHO programme on environmental health emphasizes the prevention of chemical hazards as one of the most important environmental factors affecting human health. At the same time, protection from physical factors, including radiological protection, is part of this programme. Therefore, WHO compares health detriments from both physical and chemical agents. The paper describes the hazardous waste problems of great concern in industrialized countries. For instance, the Commission of the European Communities countries produce about 2x10 9 tonnes of waste per year, a rate which grows by 2 to 3% annually. This poses serious problems of pollution, particularly where the toxic ingredients do not decay. Special attention will also be given to the safe handling of high-level radioactive waste from the peaceful use of nuclear technology. These wastes have to be stored in safe storage facilities, or be disposed of without causing damage to man and his environment. The international measures to contain and control these wastes are described, including the activities of WHO within the Global Environmental Monitoring System and Regional Sea programmes of the United Nations Environment Programme. Guidelines and methodologies for the management of hazardous chemical and radioactive wastes are being developed through WHO to assist national authorities in this task. The paper pays special attention to a comparative assessment of environmental and public health impacts of toxic chemical and radioactive wastes. (author)

Hazard characterisation of chemicals in food and diet : dose response, mechanisms and extrapolation issues

NARCIS (Netherlands)

Dybing, E.; Doe, J.; Groten, J.; Kleiner, J.; O'Brien, J.; Renwick, A.G.; Schlatter, J.; Steinberg, P.; Tritscher, A.; Walker, R.; Younes, M.

2002-01-01

Hazard characterisation of low molecular weight chemicals in food and diet generally use a no-observed-adverse-effect level (NOAEL) or a benchmark dose as the starting point. For hazards that are considered not to have thresholds for their mode of action, low-dose extrapolation and other modelling

Impacts on health and safety from transfer/consolidation of nuclear materials and hazardous chemicals

International Nuclear Information System (INIS)

Gallucci, R.H.V.

1994-11-01

Environmental restoration plans at the US Department of Energy (USDOE) Hanford Site calls for transfer/consolidation of ''targets/threats,'' namely nuclear materials and hazardous chemicals. Reductions in the health and safety hazards will depend on the plans implemented. Pacific Northwest Laboratory (PNL) estimated these potential impacts, assuming implementation of the current reference plan and employing ongoing risk and safety analyses. The results indicated the potential for ''significant'' reductions in health and safety hazards in the long term (> 25 years) and a potentially ''noteworthy'' reduction in health hazard in the short term (≤ 25 years)

EURANOS. The Handbook Users Group (HUG)

DEFF Research Database (Denmark)

Nisbet, A.F.; Andersson, Kasper Grann; Carlé, B.

Three handbooks to assist in the management of contaminated food production systems, inhabited areas and drinking water supplies have been developed in conjunction with a wide range of stakeholders in Europe. These handbooks are living documents that will require updating from time to time.......eu-neris.net) to facilitate information exchange. Emergency centres in Member States not involved in the development of the handbooks were invited to take part in demonstration activities to establish whether the handbooks were useful for the purposes of contingency planning and accident management. Results from...... to remain state-of-the-art. To address this need, a handbook users’ group (HUG) was established in 2007 to provide a platform for maintaining the handbooks and to build a network of users for both the generic handbooks and any subsequently customised versions. A web site was set up (www...

Instructions for the Tier I Emergency and Hazardous Chemical Inventory Form

Science.gov (United States)

The purpose of the Emergency Planning and Community Right-to-Know Act Tier I form is to provide State and local officials and the public with information on the general chemical hazard types and locations at your facility, if above reporting thresholds.

Survey of awareness about hazardous chemicals of residents living near chemical plants in South Korea.

Science.gov (United States)

Han, Don-Hee; Park, Min Soo

2018-02-10

With economic growth, the use of chemicals has continually increased, resulting in an increase of chemical accidents. Chemical accidents pose a life threat and can lead to many health problems among the residents living in close proximity to chemical plants. This study aimed to investigate the awareness of the residents living near chemical plants about hazardous chemicals, as well as to survey the awareness of workers who do not directly handle chemicals at chemical plants (WNHCs). To this end, a questionnaire survey was conducted among a total of 600 residents and 160 WNHCs. The questionnaire was composed of three items: awareness of chemical risk, awareness of countermeasures in chemical accidents, and imperious necessity of PPE (personal protective equipment). Statistical analysis of the data was performed with the Statistical Package for Social Sciences (SPSS) version 18.0. The results show that the government needs to complement the notification system of chemical risk for residents who live close to chemical plants. The highest priority of PPE which residents want to prepare for chemical accidents was respiratory protective equipment (RPE). They responded that, if necessary to purchase PPE, they could bear a portion of the expenses (up to US $30). This study provides basic data for the development of programs and policies on chemical safety relevant for the residents living in close proximity to chemical plants in South Korea.

Chemical dependency: An occupational hazard in the field of anaesthesia

International Nuclear Information System (INIS)

Ismail, S.

2010-01-01

The medical personnel are vulnerable to substance abuse and dependence due to ready access to substance of abuse. Addiction is considered as an occupational hazard for those involved in the practice of anaesthesia for the same reason. Substance abuse is defined as a psychosocial biogenetic disease, which results from dynamic interplay between a susceptible host and favourable environment. According to the fifth and the last National Survey on Drug Abuse (NSDA) in 1993 by Pakistan Narcotic Control, there are nearly three million drug dependants Review Article Chemical dependency: An occupational hazard in the field of anaesthesia Samina Ismail Department of Anaesthesia, Aga Khan University Hospital, Karachi. in Pakistan, but no data is available to determine the prevalence among medical or anaesthesia personnel. In order to handle the rising trend of chemical abuse, we need to have more surveys and studies on this subject, written policy and educational programme in postgraduate training with proper control and frequent checking of narcotic dispensing. Reporting of drug abuse and rehabilitation of affected doctors are areas which need to be worked upon. (author)

Handbook of systems toxicology

National Research Council Canada - National Science Library

Casciano, Daniel A; Sahu, Saura C

2011-01-01

"In the first handbook to comprehensively cover the emerging area of systems toxicology, the Handbook of Systems Toxicology provides an authoritative compilation of up-to-date developments presented...

The dilemma in prioritizing chemicals for environmental analysis: known versus unknown hazards.

Science.gov (United States)

Anna, Sobek; Sofia, Bejgarn; Christina, Rudén; Magnus, Breitholtz

2016-08-10

A major challenge for society is to manage the risks posed by the many chemicals continuously emitted to the environment. All chemicals in production and use cannot be monitored and science-based strategies for prioritization are essential. In this study we review available data to investigate which substances are included in environmental monitoring programs and published research studies reporting analyses of chemicals in Baltic Sea fish between 2000 and 2012. Our aim is to contribute to the discussion of priority settings in environmental chemical monitoring and research, which is closely linked to chemical management. In total, 105 different substances or substance groups were analyzed in Baltic Sea fish. Polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs) were the most studied substances or substance groups. The majority, 87%, of all analyses comprised 20% of the substances or substance groups, whereas 46 substance groups (44%) were analyzed only once. Almost three quarters of all analyses regarded a POP-substance (persistent organic pollutant). These results demonstrate that the majority of analyses on environmental contaminants in Baltic Sea fish concern a small number of already regulated chemicals. Legacy pollutants such as POPs pose a high risk to the Baltic Sea due to their hazardous properties. Yet, there may be a risk that prioritizations for chemical analyses are biased based on the knowns of the past. Such biases may lead to society failing in identifying risks posed by yet unknown hazardous chemicals. Alternative and complementary ways to identify priority chemicals are needed. More transparent communication between risk assessments performed as part of the risk assessment process within REACH and monitoring programs, and information on chemicals contained in consumer articles, would offer ways to identify chemicals for environmental analysis.

The water handbook. 7. ed.

International Nuclear Information System (INIS)

Bryknar, F.Z.

1988-01-01

This 7th edition of the water handbook brings up to date the last available, sixth edition of 1982. The arrangement is the same as before: explanation of symbols and units; basic principles of water chemistry; behaviour of water and additives in nuclear power plant operation; chemical engineering aspects of water treatment; standard values for operating water; operating analysis; chemicals for water treatment; corrosion and corrosion protection in steam generators; water in nuclear facilities; cleaning and acid cleaning of steam generators; conservation of steam generators; tables and diagrams; bibliography; keyword index. New terms and measuring units have been worked in, and the tables on ion exchangers have been revised. Amendments of regulatory provisions have been included where appropriate (VGB rules, Radiation Protection Ordinance). (RB) [de

Low-level-waste-treatment handbook

International Nuclear Information System (INIS)

Clinton, S.D.; Goeller, H.E.; Holladay, D.W.; Donaldson, T.L.

1982-01-01

The initial draft of the Low-Level Waste Treatment Handbook has been prepared and submitted to the DOE Low-Level Waste Management Program for review and comment. A revised draft is scheduled to be delivered to DOE Headquarters in December 1982. The Handbook is designed to be useful to all individuals and groups concerned with low-level wastes. It is one of several volumes that will ultimately comprise a Low-Level Waste Technology Handbook. The objective of the Low-Level Waste Treatment Handbook is to present an overview of current practices related to the segregation, classification, volume reduction, solidification, handling, packaging, and transportation of LLW for disposal in a shallow land burial facility. The Handbook is intended to serve as a guide to individuals interested in the treatment and handling of low-level radioactive waste. The Handbook will not explicitly tell the user how to design and operate LLW treatment facilities, but rather will identify (1) kinds of information required to evaluate the options, (2) methods that may be used to evaluate these options, and (3) limitations associated with the selection of the treatment options. The focus of the Handbook is providing guidance on how to do waste treatment for disposal by shallow land burial

Handbook of antenna technologies

CERN Document Server

Liu, Duixian; Nakano, Hisamatsu; Qing, Xianming; Zwick, Thomas

2016-01-01

The Handbook of Antenna Technologies aims to present the rapid development of antenna technologies, particularly in the past two decades, and also showcasing the newly developed technologies and the latest applications. The handbook will provide readers with the comprehensive updated reference information covering theory, modeling and optimization methods, design and measurement, new electromagnetic materials, and applications of antennas. The handbook will widely cover not only all key antenna design issues but also fundamentals, issues related to antennas (transmission, propagation, feeding structure, materials, fabrication, measurement, system, and unique design challenges in specific applications). This handbook will benefit the readers as a full and quick technical reference with a high-level historic review of technology, detailed technical descriptions and the latest practical applications.

Ewe (for Togo): Grammar Handbook. Peace Corps Language Handbook Series.

Science.gov (United States)

Kozelka, Paul R.

This handbook is composed of: (1) 20 grammar lessons; (2) an introduction to the handbook and to the Ewe language; (3) an appendix presenting the most important differences between Ewe and Mina, the lingua franca in the capital and in markets, offices, and work-sites throughout Togo; (4) answers to written summary exercises; (5) an Ewe-English…

FINODEX Handbook for Entrepreneurs

DEFF Research Database (Denmark)

The handbook provides short introductions to necessary knowledge for applicants in the two calls in October 2014 and June 2015 where they can present an idea for product development and apply for up to 10,000 Euro. Furthermore, the handbook is relevant for the next phase, where the selected approx....... 50 projects elaborate detailed technical and market plans. Last, the handbook provides links to further study and information about how to get help in later phases....

Energy Efficiency Governance: Handbook

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

This handbook has been written to assist EE practitioners, government officials and stakeholders to establish effective EE governance structures for their country. The handbook provides readers with relevant information in an accessible format that will help develop comprehensive and effective governance mechanisms. For each of the specific topics dealt with (see Figure 1 in the Handbook), the IEA offers guidelines for addressing issues, or directs readers to examples of how such issues have been dealt with by specific countries.

Guidelines for generators of hazardous chemical waste at LBL and Guidelines for generators of radioactive and mixed waste at LBL

International Nuclear Information System (INIS)

1991-07-01

The purpose of this document is to provide the acceptance criteria for the transfer of hazardous chemical, radioactive, and mixed waste to Lawrence Berkeley Laboratory's (LBL) Hazardous Waste Handling Facility (HWHF). These guidelines describe how a generator of wastes can meet LBL's acceptance criteria for hazardous chemical, radioactive, and mixed waste. 9 figs

Chemical laboratory hazardous waste management at a DOE multiprogram national laboratory

International Nuclear Information System (INIS)

Turner, P.J.

1990-03-01

Pacific Northwest Laboratory (PNL), a United States Department of Energy (DOE) Multiprogram Energy Laboratory, is establishing a program for management of diverse small-quantity laboratory waste generated on site. Although the main emphasis of this program is ''cradle-to-grave'' tracking and treatment of hazardous chemical waste and mixed waste, low-level radioactive and transuranic (TRU) waste is also being included. With the program in operation, more than 95% of all regulated waste will be treated or destroyed on site. The cost savings will return the original investment in under six years and decrease the liability to PNL and DOE -- a benefit with a potentially greater economic value. Tracking of hazardous waste will be mediated by a computer-based inventory and tracking system. The system will track all hazardous materials from receipt through final disposition, whether the material is destroyed or treated for disposal. It will allow user access to handling and hazards information as well as provide an updated inventory by location, user, and hazard type. Storage and treatment of waste will be performed by at least four facilities, made operational in three phases. 6 figs

NASA Systems Engineering Handbook

Science.gov (United States)

Hirshorn, Steven R.; Voss, Linda D.; Bromley, Linda K.

2017-01-01

The update of this handbook continues the methodology of the previous revision: a top-down compatibility with higher level Agency policy and a bottom-up infusion of guidance from the NASA practitioners in the field. This approach provides the opportunity to obtain best practices from across NASA and bridge the information to the established NASA systems engineering processes and to communicate principles of good practice as well as alternative approaches rather than specify a particular way to accomplish a task. The result embodied in this handbook is a top-level implementation approach on the practice of systems engineering unique to NASA. Material used for updating this handbook has been drawn from many sources, including NPRs, Center systems engineering handbooks and processes, other Agency best practices, and external systems engineering textbooks and guides. This handbook consists of six chapters: (1) an introduction, (2) a systems engineering fundamentals discussion, (3) the NASA program project life cycles, (4) systems engineering processes to get from a concept to a design, (5) systems engineering processes to get from a design to a final product, and (6) crosscutting management processes in systems engineering. The chapters are supplemented by appendices that provide outlines, examples, and further information to illustrate topics in the chapters. The handbook makes extensive use of boxes and figures to define, refine, illustrate, and extend concepts in the chapters.

Journal of NIRE, Vol. 5, No. 1, January 1996. Special issue: Behavior in the environment and countermeasure technology of hazardous chemicals

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-01-01

Contents: Technique for Management of Hazardous Chemical Substances --Risk Assessment; Behaviors of Chemicals in the Aquatic Environment; Numerical Model of Chemical Fate in an Environment; Source Characterization and Chemical Processes of Volatile Organic Compounds in the Atmosphere; Development of Sensor for Hazardous Substances; Removal of Chemical Substances from the Atmosphere by Photocatalysis; Microbial Degradation of Organic Xenobiotics in Environment.

Shallow-land-burial handbook

International Nuclear Information System (INIS)

Boegly, W.J. Jr.; Davis, E.C.

1981-01-01

The initial draft of the Shallow-Land Burial Handbook has been prepared and submitted to the DOE Low-Level Waste Management Program for review and comment. The Handbook informs the reader of the current way in which low-level wastes are being handled, outlines the legal and institutional problems that would be involved in developing and licensing such a facility, and describes in some detail the considerations and data needs for siting, designing, operating, and closing such a facility. The initial draft is not a Handbook that provides answers to all questions, nor insures that following the steps detailed in the Handbook guarantees that the facility will be licensed. It does illustrate the types of actions that must be considered and the types of information required to achieve successful operations

Java EE 7 handbook

CERN Document Server

Pilgrim, Peter A

2013-01-01

Java EE 7 Handbook is an example based tutorial with descriptions and explanations.""Java EE 7 Handbook"" is for the developer, designer, and architect aiming to get acquainted with the Java EE platform in its newest edition. This guide will enhance your knowledge about the Java EE 7 platform. Whether you are a long-term Java EE (J2EE) developer or an intermediate level engineer on the JVM with just Java SE behind you, this handbook is for you, the new contemporary Java EE 7 developer!

Chemical Warfare Agent Operational Exposure Hazard Assessment Research: FY07 Report and Analysis

Science.gov (United States)

2010-07-01

agent migration rates. As stated by Armour and Sturgeon (1992), the extent of the contact hazard depends on the initial degree of contamination, the...with a contaminated surface. 2.1.5 Literature Cited 1. Armour , S.J; Sturgeon, W.R. Liquid Hazard from Chemical Warfare Agents for Pilots of High...the neck area was clipped and prepped with betadine, and the animal covered with a sterile surgical drape . The planned incision areas in the

A Poetry Handbook.

Science.gov (United States)

Oliver, Mary

Intended to impart the basic ways a poem is constructed, this concise handbook is a prose guide to writing poetry. The handbook talks about meter and rhyme, form and diction, sound and sense, iambs and trochees, couplets and sonnets, and how and why this should matter to any person writing or reading poetry. Interspersing history and analysis with…

FCRD Advanced Reactor (Transmutation) Fuels Handbook

Energy Technology Data Exchange (ETDEWEB)

Janney, Dawn Elizabeth [Idaho National Lab. (INL), Idaho Falls, ID (United States); Papesch, Cynthia Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-09-01

Transmutation of minor actinides such as Np, Am, and Cm in spent nuclear fuel is of international interest because of its potential for reducing the long-term health and safety hazards caused by the radioactivity of the spent fuel. One important approach to transmutation (currently being pursued by the DOE Fuel Cycle Research & Development Advanced Fuels Campaign) involves incorporating the minor actinides into U-Pu-Zr alloys, which can be used as fuel in fast reactors. U-Pu-Zr alloys are well suited for electrolytic refining, which leads to incorporation rare-earth fission products such as La, Ce, Pr, and Nd. It is, therefore, important to understand not only the properties of U-Pu-Zr alloys but also those of U-Pu-Zr alloys with concentrations of minor actinides (Np, Am) and rare-earth elements (La, Ce, Pr, and Nd) similar to those in reprocessed fuel. In addition to requiring extensive safety precautions, alloys containing U, Pu, and minor actinides (Np and Am) are difficult to study for numerous reasons, including their complex phase transformations, characteristically sluggish phasetransformation kinetics, tendency to produce experimental results that vary depending on the histories of individual samples, rapid oxidation, and sensitivity to contaminants such as oxygen in concentrations below a hundred parts per million. Although less toxic, rare-earth elements such as La, Ce, Pr, and Nd are also difficult to study for similar reasons. Many of the experimental measurements were made before 1980, and the level of documentation for experimental methods and results varies widely. It is, therefore, not surprising that little is known with certainty about U-Pu-Zr alloys, particularly those that also contain minor actinides and rare-earth elements. General acceptance of results commonly indicates that there is only a single measurement for a particular property. This handbook summarizes currently available information about U, Pu, Zr, Np, Am, La, Ce, Pr, and Nd and

An investigation of the health hazards of some of the chemical ...

African Journals Online (AJOL)

This short piece takes a limited look at the health hazards of the chemical contents of seven fruit juices sold in The Gambia. All of them have very negative effects on health. The following additives were considered: sweeteners, coloring agents, flavoring agents and acidifiers vis-à-vis established studies. [African Journal of ...

76 FR 60474 - Commercial Item Handbook

Science.gov (United States)

2011-09-29

... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System Commercial Item Handbook AGENCY.... SUMMARY: DoD has updated its Commercial Item Handbook. The purpose of the Handbook is to help acquisition personnel develop sound business strategies for procuring commercial items. DoD is seeking industry input on...

Effectuality of Cleaning Workers' Training and Cleaning Enterprises' Chemical Health Hazard Risk Profiling.

Science.gov (United States)

Suleiman, Abdulqadir M; Svendsen, Kristin V H

2015-12-01

Goal-oriented communication of risk of hazards is necessary in order to reduce risk of workers' exposure to chemicals. Adequate training of workers and enterprise priority setting are essential elements. Cleaning enterprises have many challenges and the existing paradigms influence the risk levels of these enterprises. Information on organization and enterprises' prioritization in training programs was gathered from cleaning enterprises. A measure of enterprises' conceptual level of importance of chemical health hazards and a model for working out the risk index (RI) indicating enterprises' conceptual risk level was established and used to categorize the enterprises. In 72.3% of cases, training takes place concurrently with task performances and in 67.4% experienced workers conduct the trainings. There is disparity between employers' opinion on competence level of the workers and reality. Lower conceptual level of importance was observed for cleaning enterprises of different sizes compared with regional safety delegates and occupational hygienists. Risk index values show no difference in risk level between small and large enterprises. Training of cleaning workers lacks the prerequisite for suitability and effectiveness to counter risks of chemical health hazards. There is dereliction of duty by management in the sector resulting in a lack of competence among the cleaning workers. Instituting acceptable easily attainable safety competence level for cleaners will conduce to risk reduction, and enforcement of attainment of the competence level would be a positive step.

Endocrine effects of chemicals: aspects of hazard identification and human health risk assessment.

Science.gov (United States)

Dekant, Wolfgang; Colnot, Thomas

2013-12-16

Hazard and risk assessment of chemicals with endocrine activity is hotly debated due to claimed non-monotonous dose-response curves in the low-dose region. In hazard identification a clear definition of "endocrine disruptors" (EDs) is required; this should be based on the WHO/IPCS definition of EDs and on adverse effects demonstrated in intact animals or humans. Therefore, endocrine effects are a mode of action potentially resulting in adverse effects; any classification should not be based on a mode of action, but on adverse effects. In addition, when relying on adverse effects, most effects reported in the low-dose region will not qualify for hazard identification since most have little relation to an adverse effect. Non-monotonous dose-response curves that had been postulated from limited, exploratory studies could also not be reproduced in targeted studies with elaborate quality assurance. Therefore, regulatory agencies or advisory bodies continue to apply the safety-factor method or the concept of "margin-of-exposure" based on no observed adverse effect levels (NOAELs) in the risk assessment of chemicals with weak hormonal activity. Consistent with this approach, tolerable levels regarding human exposure have been defined for such chemicals. To conclusively support non-monotonous dose-response curves, targeted experiments with a sufficient number of animals, determination of adverse endpoints, adequate statistics and quality control would be required. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Chemical Contaminants Associated with Palm Wine from Nigeria Are Potential Food Safety Hazards

Directory of Open Access Journals (Sweden)

Ogueri Nwaiwu

2017-03-01

Full Text Available Recent analysis of palm wine, a traditional drink fermented mainly by yeasts, revealed the presence of several chemicals that were not products of yeast fermentation. The chemicals included styrene, benzene, trimethyldioxolane, dichloromethane, methylene fluoride, dichloroethanol, benzylisoquinoline and tetraacetyl-d-xylonic nitrile. A review of the concentrations of these compounds in palm wine found that the benzene concentrations in all samples reviewed ranged from 56–343 ppm and were within permissible limits, whereas the styrene values (1505–5614 ppm in all the palm wine samples evaluated were well over the recommended concentration that is immediately dangerous to life or health. Other chemical compounds evaluated varied according to location or sample source. The concentrations obtained are estimates only and a quantitative study needs to be carried out before the impact of these chemicals on health is evaluated. A search on The PubChem Project, the open chemical database, showed the description, properties and uses of these chemicals. Further searches carried out within other databases like PubMed, Scopus and Google Scholar, using each chemical’s name as a search term, showed possible hazards and adverse health conditions caused by these chemicals, especially styrene, benzene and dichloromethane. The point at which the chemicals are introduced into the drink is still not clear and requires further investigation. The chemicals can be hazardous to humans and there is need to establish and maintain a system that can guarantee permissible levels in the drink. This can be carried out using concentrations of the chemicals that are already known to be immediately dangerous to life or health as a reference point.

NASA System Safety Handbook. Volume 1; System Safety Framework and Concepts for Implementation

Science.gov (United States)

Dezfuli, Homayoon; Benjamin, Allan; Everett, Christopher; Smith, Curtis; Stamatelatos, Michael; Youngblood, Robert

2011-01-01

System safety assessment is defined in NPR 8715.3C, NASA General Safety Program Requirements as a disciplined, systematic approach to the analysis of risks resulting from hazards that can affect humans, the environment, and mission assets. Achievement of the highest practicable degree of system safety is one of NASA's highest priorities. Traditionally, system safety assessment at NASA and elsewhere has focused on the application of a set of safety analysis tools to identify safety risks and formulate effective controls.1 Familiar tools used for this purpose include various forms of hazard analyses, failure modes and effects analyses, and probabilistic safety assessment (commonly also referred to as probabilistic risk assessment (PRA)). In the past, it has been assumed that to show that a system is safe, it is sufficient to provide assurance that the process for identifying the hazards has been as comprehensive as possible and that each identified hazard has one or more associated controls. The NASA Aerospace Safety Advisory Panel (ASAP) has made several statements in its annual reports supporting a more holistic approach. In 2006, it recommended that "... a comprehensive risk assessment, communication and acceptance process be implemented to ensure that overall launch risk is considered in an integrated and consistent manner." In 2009, it advocated for "... a process for using a risk-informed design approach to produce a design that is optimally and sufficiently safe." As a rationale for the latter advocacy, it stated that "... the ASAP applauds switching to a performance-based approach because it emphasizes early risk identification to guide designs, thus enabling creative design approaches that might be more efficient, safer, or both." For purposes of this preface, it is worth mentioning three areas where the handbook emphasizes a more holistic type of thinking. First, the handbook takes the position that it is important to not just focus on risk on an individual

Low-level radioactive waste management handbook series: Low-level radioactive waste management in medical and biomedical research institutions

International Nuclear Information System (INIS)

1987-03-01

Development of this handbook began in 1982 at the request of the Radhealth Branch of the California Department of Health Services. California Assembly Bill 1513 directed the DHS to ''evaluate the technical and economic feasibility of (1) reducing the volume, reactivity, and chemical and radioactive hazard of (low-level radioactive) waste and (2) substituting nonradioactive or short-lived radioactive materials for those radionuclides which require long-term isolation from the environment. A contract awarded to the University of California at Irvine-UCI (California Std. Agreement 79902), to develop a document focusing on methods for decreasing low-level radioactive waste (LLW) generation in institutions was a result of that directive. In early 1985, the US Department of Energy, through EG and G Idaho, Inc., contracted with UCI to expand, update, and revise the California text for national release

Use of short-term test systems for the prediction of the hazard represented by potential chemical carcinogens

Energy Technology Data Exchange (ETDEWEB)

Glass, L.R.; Jones, T.D.; Easterly, C.E.; Walsh, P.J.

1990-10-01

It has been hypothesized that results from short-term bioassays will ultimately provide information that will be useful for human health hazard assessment. Historically, the validity of the short-term tests has been assessed using the framework of the epidemiologic/medical screens. In this context, the results of the carcinogen (long-term) bioassay is generally used as the standard. However, this approach is widely recognized as being biased and, because it employs qualitative data, cannot be used to assist in isolating those compounds which may represent a more significant toxicologic hazard than others. In contrast, the goal of this research is to address the problem of evaluating the utility of the short-term tests for hazard assessment using an alternative method of investigation. Chemicals were selected mostly from the list of carcinogens published by the International Agency for Research on Carcinogens (IARC); a few other chemicals commonly recognized as hazardous were included. Tumorigenicity and mutagenicity data on 52 chemicals were obtained from the Registry of Toxic Effects of Chemical Substances (RTECS) and were analyzed using a relative potency approach. The data were evaluated in a format which allowed for a comparison of the ranking of the mutagenic relative potencies of the compounds (as estimated using short-term data) vs. the ranking of the tumorigenic relative potencies (as estimated from the chronic bioassays). Although this was a preliminary investigation, it offers evidence that the short-term tests systems may be of utility in ranking the hazards represented by chemicals which may contribute to increased carcinogenesis in humans as a result of occupational or environmental exposures. 177 refs., 8 tabs.

Use of short-term test systems for the prediction of the hazard represented by potential chemical carcinogens

International Nuclear Information System (INIS)

Glass, L.R.; Jones, T.D.; Easterly, C.E.; Walsh, P.J.

1990-10-01

It has been hypothesized that results from short-term bioassays will ultimately provide information that will be useful for human health hazard assessment. Historically, the validity of the short-term tests has been assessed using the framework of the epidemiologic/medical screens. In this context, the results of the carcinogen (long-term) bioassay is generally used as the standard. However, this approach is widely recognized as being biased and, because it employs qualitative data, cannot be used to assist in isolating those compounds which may represent a more significant toxicologic hazard than others. In contrast, the goal of this research is to address the problem of evaluating the utility of the short-term tests for hazard assessment using an alternative method of investigation. Chemicals were selected mostly from the list of carcinogens published by the International Agency for Research on Carcinogens (IARC); a few other chemicals commonly recognized as hazardous were included. Tumorigenicity and mutagenicity data on 52 chemicals were obtained from the Registry of Toxic Effects of Chemical Substances (RTECS) and were analyzed using a relative potency approach. The data were evaluated in a format which allowed for a comparison of the ranking of the mutagenic relative potencies of the compounds (as estimated using short-term data) vs. the ranking of the tumorigenic relative potencies (as estimated from the chronic bioassays). Although this was a preliminary investigation, it offers evidence that the short-term tests systems may be of utility in ranking the hazards represented by chemicals which may contribute to increased carcinogenesis in humans as a result of occupational or environmental exposures. 177 refs., 8 tabs

The Yaws handbook of vapor pressure Antoine coefficients

CERN Document Server

Yaws, Carl L

2015-01-01

Increased to include over 25,000 organic and inorganic compounds, The Yaws Handbook of Vapor Pressure: Antoine Coefficients, 2nd Edition delivers the most comprehensive and practical database source for today's petrochemical. Understanding antoine coefficients for vapor pressure leads to numerous critical engineering applications such as pure components in storage vessels, pressure relief valve design, flammability limits at the refinery, as well as environmental emissions from exposed liquids, making data to efficiently calculate these daily challenges a fundamental need. Written by the world's leading authority on chemical and petrochemical data, The Yaws Handbook of Vapor Pressure simplifies the guesswork for the engineer and reinforces the credibility of the engineer's calculations with a single trust-worthy source. This data book is a must-have for the engineer's library bookshelf. Increase compound coverage from 8,200 to over 25,000 organic and inorganic compounds, including sulfur and hydrocarbons Sol...

16 CFR 1500.231 - Guidance for hazardous liquid chemicals in children's products.

Science.gov (United States)

2010-01-01

..., distributors, and retailers to protect children from exposure to hazardous chemicals found in liquid-filled... purchasing products for resale, importers, distributors, and retailers obtain assurances from manufacturers... subsequent hand-to-mouth or hand-to-eye activity. The specific type and frequency of behavior that a child...

Standing operating procedures for developing acute exposure guideline levels for hazardous chemicals

National Research Council Canada - National Science Library

National Research Council (U.S.). Subcommittee on Acute Exposure Guideline Levels

2001-01-01

... Exposure Guideline Levels for Hazardous Chemicals Subcommittee on Acute Exposure Guideline Levels Committee on Toxicology Board on Environmental Studies and Toxicology Commission on Life Sciences National Research Council NATIONAL ACADEMY PRESS Washington, D.C. i Copyrightthe cannot be not from book, paper however, version for formatting, origina...

Gen IV Materials Handbook Functionalities and Operation

International Nuclear Information System (INIS)

Ren, Weiju

2009-01-01

This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

Gen IV Materials Handbook Functionalities and Operation

Energy Technology Data Exchange (ETDEWEB)

Ren, Weiju [ORNL

2009-12-01

This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

Reducing aquatic hazards of industrial chemicals: probabilistic assessment of sustainable molecular design guidelines.

Science.gov (United States)

Connors, Kristin A; Voutchkova-Kostal, Adelina M; Kostal, Jakub; Anastas, Paul; Zimmerman, Julie B; Brooks, Bryan W

2014-08-01

Basic toxicological information is lacking for the majority of industrial chemicals. In addition to increasing empirical toxicity data through additional testing, prospective computational approaches to drug development aim to serve as a rational basis for the design of chemicals with reduced toxicity. Recent work has resulted in the derivation of a "rule of 2," wherein chemicals with an octanol-water partition coefficient (log P) less than 2 and a difference between the lowest unoccupied molecular orbital and the highest occupied molecular orbital (ΔE) greater than 9 (log P9 eV) are predicted to be 4 to 5 times less likely to elicit acute or chronic toxicity to model aquatic organisms. The present study examines potential reduction of aquatic toxicity hazards from industrial chemicals if these 2 molecular design guidelines were employed. Probabilistic hazard assessment approaches were used to model the likelihood of encountering industrial chemicals exceeding toxicological categories of concern both with and without the rule of 2. Modeling predicted that utilization of these molecular design guidelines for log P and ΔE would appreciably decrease the number of chemicals that would be designated to be of "high" and "very high" concern for acute and chronic toxicity to standard model aquatic organisms and end points as defined by the US Environmental Protection Agency. For example, 14.5% of chemicals were categorized as having high and very high acute toxicity to the fathead minnow model, whereas only 3.3% of chemicals conforming to the design guidelines were predicted to be in these categories. Considerations of specific chemical classes (e.g., aldehydes), chemical attributes (e.g., ionization), and adverse outcome pathways in representative species (e.g., receptor-mediated responses) could be used to derive future property guidelines for broader classes of contaminants. © 2014 SETAC.

Treatment of oil spill fire hazards with chemical dispersants: a case history

Energy Technology Data Exchange (ETDEWEB)

Kaufmann, S.

1982-10-01

Federal contingency plans include the use of chemical dispersants to ameliorate hazardous situations caused by spills of flammable or explosive petroleum products. The closing of the Williamsburg Bridge in New York City, when a gasoline tanker exploded and sank under it, was nearly overshadowed by the leakage of 7 750 000 L (2 000 000 gal) of gasoline from a storage facility in Boston. The threat to a densely populated neighborhood of six-family tenement houses and a large racetrack that stabled hundreds of Thoroughbred horses led to the use of a chemical dispersant to neutralize the fire hazard. Favorable results by fire departments in recent years, as a result of training, have established dispersants as the method of choice to handle nonburning spill incidents. Even though the teams that responded to several such emergencies of course held the protection of life and property as paramount, no toxicological environmental effects were noted during subsequent observations.

Procurement Career Management Handbook.

Science.gov (United States)

Department of the Treasury, Washington, DC.

This handbook is the result of the Treasury Department's efforts to increase professionalism among its procurement employees nationwide through its Procurement Career Management Program. First, the scope and objectives of the Procurement Career Management Program are discussed. The remaining sections of the handbook deal with the following program…

Warehouse Sanitation Workshop Handbook.

Science.gov (United States)

Food and Drug Administration (DHHS/PHS), Washington, DC.

This workshop handbook contains information and reference materials on proper food warehouse sanitation. The materials have been used at Food and Drug Administration (FDA) food warehouse sanitation workshops, and are selected by the FDA for use by food warehouse operators and for training warehouse sanitation employees. The handbook is divided…

Travel time data collection handbook

Science.gov (United States)

1998-03-01

This Travel Time Data Collection Handbook provides guidance to transportation : professionals and practitioners for the collection, reduction, and presentation : of travel time data. The handbook should be a useful reference for designing : travel ti...

Recent research in earth structure, earthquake and mine seismology, and seismic hazard evaluation in South Africa

CSIR Research Space (South Africa)

Wright, C

2003-07-01

Full Text Available of earthquakes, earthquake hazard and earth structure in South Africa was prepared for the centennial handbook of the Interna- tional Association of Seismology and the Physics of the Earth?s Interior(IASPEI).3 Referencestothesescompletedinthelastfour...

Handbook on criticality. Vol. 1. Criticality and nuclear safety; Handbuch zur Kritikalitaet. Bd. 1. Kritikalitaet und nukleare Sicherheit

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-04-15

This handbook was prepared primarily with the aim to provide information to experts in industry, authorities or research facilities engaged in criticality-safety-related problems that will allow an adequate and rapid assessment of criticality safety issues already in the planning and preparation of nuclear facilities. However, it is not the intention of the authors of the handbook to offer ready solutions to complex problems of nuclear safety. Such questions have to remain subject to an in-depth analysis and assessment to be carried out by dedicated criticality safety experts. Compared with the previous edition dated December 1998, this handbook has been further revised and supplemented. The proven basic structure of the handbook remains unchanged. The handbook follows in some ways similar criticality handbooks or instructions published in the USA, UK, France, Japan and the former Soviet Union. The expedient use of the information given in this handbook requires a fundamental understanding of criticality and the terminology of nuclear safety. In Vol. 1, ''Criticality and Nuclear Safety'', therefore, first the most important terms and fundamentals are introduced and explained. Subsequently, experimental techniques and calculation methods for evaluating criticality problems are presented. The following chapters of Vol. 1 deal i. a. with the effect of neutron reflectors and absorbers, neutron interaction, measuring methods for criticality, and organisational safety measures and provide an overview of criticality-relevant operational experience and of criticality accidents and their potential hazardous impact. Vol. 2 parts 1 and 2 finally compile criticality parameters in graphical and tabular form. The individual graph sheets are provided with an initially explained set of identifiers, to allow the quick finding of the information of current interest. Part 1 includes criticality parameters for systems with {sup 235}U as fissile material, while part

Monitoring and trace detection of hazardous waste and toxic chemicals using resonance Raman spectroscopy

International Nuclear Information System (INIS)

Sedlacek, A.J. III; Dougherty, D.R.; Chen, C.L.

1993-01-01

Raman scattering is a coherent, inelastic, two-photon process, which shifts the frequency of an outgoing photon according to the vibrational structure of the irradiated species, thereby providing a unique fingerprint of the molecule. When involving an allowed electronic transition (resonance Raman), this scattering cross section can be enhanced by 10 4 to 10 6 and provides the basis for a viable technique that can monitor and detect trace quantities of hazardous wastes and toxic chemicals. Resonance Raman spectroscopy (RRS) possesses many of the ideal characteristics for monitoring and detecting of hazardous waste and toxic chemicals. Some of these traits are: (1) very high selectivity (chemical specific fingerprints); (2) independence from the excitation wavelength (ability to monitor in the solar blind region); (3) chemical mixture fingerprints are the sum of its individual components (no spectral cross-talk); (4) near independence of the Raman fingerprint to its physical state (very similar spectra for gas, liquid, solid and solutions -- either bulk or aerosols); and (5) insensitivity of the Raman signature to environmental conditions (no quenching). Data from a few chemicals will be presented which illustrate these features. In cases where background fluorescence accompanies the Raman signals, an effective frequency modulation technique has been developed, which can completely eliminate this interference

The nanobiotechnology handbook

CERN Document Server

Xie, Yubing

2012-01-01

A thorough overview of nanobiotechnology and its place in advances in applied science and engineering, The Nanobiotechnology Handbook combines contributions from physics, bioorganic and bioinorganic chemistry, molecular and cellular biology, materials science, and medicine as well as from mechanical, electrical, chemical, and biomedical engineering to address the full scope of current and future developments. World-class experts discuss the role of nanobiotechnology in bioanalysis, biomolecular and biomedical nanotechnology, biosensors, biocatalysis and biofuel, and education and workforce development. It includes a companion CD that contains all figures in the book. The book begins with discussions of biomimetic nanotechnology, including a comprehensive overview of DNA nanostructure and DNA-inspired nanotechnology, aptamer-functionalized nanomaterials as artificial antibodies, artificial enzymes, molecular motors, and RNA structures and RNA-inspired nanotechnology. It shows how nanotechnology can be inspired...

Mobile retroreflectivity best practices handbook.

Science.gov (United States)

2009-07-01

This handbook documents best practices related to proper use of the mobile retroreflectometer, sampling of : sites for data collection, and handling of mobile retroreflectivity data. The best practices described in this : handbook are derived from th...

CRC handbook of modern telecommunications

CERN Document Server

Morreale, Patricia A

2001-01-01

This authoritative handbook, contributed to by a team of international experts, covers the most dynamic areas in the changing telecommunications landscape. Written for telecommunications specialists who implement the new technologies, The CRC Handbook of Modern Telecommunications is an excellent companion volume to the authors' The Telecommunications Handbook, but stands well on its own, as it extends the range of topics to include voice over Internet, traffic management, quality of service, and other dominant future trends. It is an indispensable reference for all professionals working in the

Overview of the 2014 Edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook)

Energy Technology Data Exchange (ETDEWEB)

John D. Bess; J. Blair Briggs; Jim Gulliford; Ian Hill

2014-10-01

The International Reactor Physics Experiment Evaluation Project (IRPhEP) is a widely recognized world class program. The work of the IRPhEP is documented in the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook). Integral data from the IRPhEP Handbook is used by reactor safety and design, nuclear data, criticality safety, and analytical methods development specialists, worldwide, to perform necessary validations of their calculational techniques. The IRPhEP Handbook is among the most frequently quoted reference in the nuclear industry and is expected to be a valuable resource for future decades.

Present status of Japanese Criticality Safety Handbook

International Nuclear Information System (INIS)

Okuno, Hiroshi

1999-01-01

A draft of the second edition of Nuclear Criticality Safety Handbook has been finalized, and it is under examination by reviewing committee for JAERI Report. Working Group designated for revising the Japanese Criticality Safety Handbook, which is chaired by Prof. Yamane, is now preparing for 'Guide on Burnup Credit for Storage and Transport of Spent Nuclear Fuel' and second edition of 'Data Collection' part of Handbook. Activities related to revising the Handbook might give a hint for a future experiment at STACY. (author)

Safety and environmental health handbook

Science.gov (United States)

,

1989-01-01

This Safety Handbook (445-1-H.) supplements the Geological Survey Safety Management Program objectives set forth in Survey Manual 445.1. Specifically, it provides a compact source of basic information to assist management and employees in preventing motor vehicle accidents, personal injuries, occupational diseases, fire, and other property damage or loss. All work situations incidental to the Geological Survey cannot be discussed in a handbook, and such complete coverage is not intended in this document. However, a wide range of subjects are covered in which a "common sense" approach to safety has been expressed. These subjects have been organized such that Chapters 1-5 address administrative issues, Chapters 6-12 address activities usually conducted within a facility, and Chapters 13-20 address field activities. No information contained in the Handbook is intended to alter any provision of any Federal law or executive order, Department of the Interior or Survey directive, or collective bargaining agreement. Questions or suggestions regarding the content of the Safety Handbook may be directed to the Survey Safety Manager, Administrative Division, Office of Facilities and Management Services, National Center, Reston, Virginia, Mail Stop 246. The previous edition of the Safety Handbook is superseded.

IRPhEP-handbook, International Handbook of Evaluated Reactor Physics Benchmark Experiments

International Nuclear Information System (INIS)

Sartori, Enrico; Blair Briggs, J.

2008-01-01

1 - Description: The purpose of the International Reactor Physics Experiment Evaluation Project (IRPhEP) is to provide an extensively peer-reviewed set of reactor physics-related integral data that can be used by reactor designers and safety analysts to validate the analytical tools used to design next-generation reactors and establish the safety basis for operation of these reactors. This work of the IRPhEP is formally documented in the 'International Handbook of Evaluated Reactor Physics Benchmark Experiments,' a single source of verified and extensively peer-reviewed reactor physics benchmark measurements data. The IRPhE Handbook is available on DVD. You may request a DVD by completing the DVD Request Form available at: http://irphep.inl.gov/handbook/hbrequest.shtml The evaluation process entails the following steps: 1. Identify a comprehensive set of reactor physics experimental measurements data, 2. Evaluate the data and quantify overall uncertainties through various types of sensitivity analysis to the extent possible, verify the data by reviewing original and subsequently revised documentation, and by talking with the experimenters or individuals who are familiar with the experimental facility, 3. Compile the data into a standardized format, 4. Perform calculations of each experiment with standard reactor physics codes where it would add information, 5. Formally document the work into a single source of verified and peer reviewed reactor physics benchmark measurements data. The International Handbook of Evaluated Reactor Physics Benchmark Experiments contains reactor physics benchmark specifications that have been derived from experiments that were performed at various nuclear experimental facilities around the world. The benchmark specifications are intended for use by reactor physics personal to validate calculational techniques. The 2008 Edition of the International Handbook of Evaluated Reactor Physics Experiments contains data from 25 different

Radiological protection: a summary handbook of ICRP publications and recommendations

International Nuclear Information System (INIS)

Nagaratnam, A.

1995-01-01

The biological effects of radiation and potential risks therefrom far exceeds the knowledge of any other hazardous agent, whether in the industrial field, or in the general environment affecting members of the public. The International Commission on Radiological Protection (ICRP) has been playing a pioneering role for decades in this direction. The extensive database that has been established over the decades by the ICRP, the methodologies, techniques and the organizational structures that have been developed to control radiation hazards, and, above all, the philosophy of risk evaluation and management that has been evolved by ICRP, would serve as valuable guides not only to those concerned with radiological protection but to scientist, technologist and administrators involved in all facets of occupational and industrial safety, as well as those concerned with environmental protection. From 1959 to the end of 1993 ICRP has brought out 64 publications running to around 9000 pages. It is important that everyone connected with the uses of ionizing radiations should be familiar with at least the basic features of the thinking of ICRP as embodied in these publications. The present handbook attempts to give in a concise, consolidated and codified form the salient features of all the relevant information contained in the voluminous ICRP publications. The material has been presented in 7 parts, each dealing with one major aspect of the recommendations, and summarizing the various publications connected with it. A separate note following the preface gives a brief summary of the way the contents of the handbook have been arranged. refs., tabs., figs

Harwell emergency handbook

International Nuclear Information System (INIS)

1986-12-01

The Harwell Laboratory Emergency Handbook 1987 contains emergency procedures to deal with any incident which might occur at AERE Harwell involving radioactive or toxic material releases. The Handbook gives details of the duties of members of the Site Emergency Organization and other key members of staff, the methods by which incidents are controlled, the communication links and liaison arrangements with other organizations and the possible consequences and actions that may be needed following an emergency. (UK)

Hazardous waste: cleanup and prevention

Science.gov (United States)

Vandas, Stephen; Cronin, Nancy L.; Farrar, Frank; Serrano, Guillermo Eliezer Ávila; Yajimovich, Oscar Efraín González; Muñoz, Aurora R.; Rivera, María del C.

1996-01-01

Our lifestyles are supported by complex Industrial activities that produce many different chemicals and chemical wastes. The Industries that produce our clothing, cars, medicines, paper, food, fuels, steel, plastics, and electric components use and discard thousands of chemicals every year. At home we may use lawn chemicals, solvents, disinfectants, cleaners, and auto products to Improve our quality of life. A chemical that presents a threat or unreasonable risk to people or the environment Is a hazardous material. When a hazardous material can no longer be used, It becomes a hazardous waste. Hazardous wastes come from a variety of sources, from both present and past activities. Impacts to human health and the environment can result from Improper handling and disposal of hazardous waste.

The development of a packaging handbook

International Nuclear Information System (INIS)

Shappert, L.B.

1994-01-01

The Packaging Handbook, dealing with the development of packagings designed to carry radioactive material, is being written for DOE's Transportation and Packaging Safety Division. The primary goal of the Handbook is to provide sufficient technical information and guidance to improve the quality of Safety Analysis Reports on Type B Packagings (SARPs) that are submitted to DOE for certification. This paper provides an update on the status of the Handbook

Savannah River Site TIER TWO report 1992: Emergency and Hazardous Chemical Inventory report

International Nuclear Information System (INIS)

Still, G.O.

1993-03-01

This report is a compilation of data on emergency and hazardous chemicals stored at the Savannah River Site. The report lists quantities of materials, general types of storage containment, types of storage conditions (pressure and temperature), and other information of relevance for particular materials

Assessing food safety concepts on the dairy farm: the case of chemical hazards

NARCIS (Netherlands)

Valeeva, N.I.; Meuwissen, M.P.M.; Oude Lansink, A.G.J.M.; Bergevoet, R.H.M.; Huirne, R.B.M.

2004-01-01

Adaptive conjoint analysis was used to elicit farmers' and experts' preferences for attributes of improving food safety with respect to chemical hazards on the dairy farm. Groups of respondents were determined by cluster analysis based on similar farmers' and experts' perceptions of food safety

Sanitary Assessment of Hazardous Materials Exposed To Highly Toxic Chemical Compounds

International Nuclear Information System (INIS)

Rembovskiy, V.; Ermolaeva, E.

2007-01-01

Industrial or terroristic accidents in which toxic chemicals (TC) are the main or attendant damaging factors should be regarded as a new challenge for experts, because of little knowledge on the methodology to estimating the long-term risk for humans due to contamination of the building materials and environment. In the Russian Federation, there appeared to be a kind of model systems for developing an algorithm for solving these or similar problems. Under dismantling and liquidation of the former facilities for chemical weapon production (FCWP) the building materials are regarded as potential waste products the fate of which (processing, warehousing, utilization, and destruction) is dependent on their possible hazard for human population and environment. The standard approaches for hazard assessment of waste products of the FCWP turned out to be insufficient. When conducting the present work, the following problems have been solved: 1. Selection of representative samples taking into consideration a diversity of construction materials, great quantities of potentially toxic waste materials, information on the production conditions, breakdowns in the process of production, accidents, composition of the decontaminators used, decontamination frequency, etc. 2. Analysis of TC in composite matrixes complicated by the following problems: extraction, masking effects of concomitant components during indirect analysis, lack of certified methods of direct analysis of TC, discrepancy of results of GC and direct GCMS analysis, low sensitivity of GCMS analysis, big volume of samples (more than 0.5 kg), heterogeneity of physical-chemical properties of different matrixes influencing the process of degradation of TC. 3. Hazard assessment of the wastes in toxic-and-sanitary experiment relying on non-specific signs of intoxication due to relatively low percentage of TC and masking effects of various matrix components. Application of the integral toxicity tests with soil

Impact-generated Tsunamis: An Over-rated Hazard

Science.gov (United States)

Melosh, H. J.

2003-01-01

A number of authors have suggested that oceanic waves (tsunami) created by the impact of relatively small asteroids into the Earth's oceans might cause widespread devastation to coastal cities. If correct, this suggests that asteroids > 100 m in diameter may pose a serious hazard to humanity and could require a substantial expansion of the current efforts to identify earth-crossing asteroids > 1 km in diameter. The debate on this hazard was recently altered by the release of a document previously inaccessible to the scientific community. In 1968 the US Office of Naval Research commissioned a summary of several decades of research into the hazard proposed by waves generated by nuclear explosions in the ocean. Authored by tsunami expert William Van Dorn, this 173-page report entitled Handbook of Explosion-Generated Water Waves affords new insight into the process of impact wave formation, propagation, and run up onto the shoreline.

Petra Governance Handbook - WP7 – Governance structures & business models : D7.3: Governance Handbook

NARCIS (Netherlands)

Veeneman, W.; Hirschhorn, F.; Klievink, A.J.; Steenhuisen, B.M.; van der Voort, H.G.

2017-01-01

This document represents the governance handbook on mobility data platforms for the PETRA project. The governance handbook provides metropolitan authorities contemplating the implementation of a mobility data platform in line with the PETRA project about governance issues and design.
The

Handbook for value-impact assessment

International Nuclear Information System (INIS)

Heaberlin, S.W.; Burnham, J.B.; Gallucci, R.H.V.

1983-12-01

The basic purpose of this handbook is to document a set of systematic procedures for providing information that can be used in performing value-impact assessments of Nuclear Regulatory Commission (NRC) regulatory actions. The handbook describes a structured but flexible process for performing the assessment. Chapter 1 is an introduction to the value-impact assessment process. Chapter 2 describes the attributes most frequently affected by proposed NRC actions, provides guidance concerningthe appropriate level of effort to be devoted to the assessment, suggests a standard format for documenting the assessment, and discusses the treatment of uncertainty. Chapter 3 contains detailed methods for evaluating each of the attributes affected by a regulatory action. The handbook has five appendixes containing background information, technical data, and example applications of the value-impact assessment procedures. This edition of the handbook focuses primarily on assessing nuclear power reactor safety issues

WIPP Project Records Management Handbook

International Nuclear Information System (INIS)

1991-01-01

The Waste Isolation Pilot Plant (WIPP) Records Management Handbook provides the WIPP Project Records Management personnel with a tool to use to fulfill the requirements of the WIPP Records Program and direct their actions in the important area of records management. The handbook describes the various project areas involved in records management, and how they function. The handbook provides the requirements for Record Coordinators and Master Record Center (MRC) personnel to follow in the normal course of file management, records scheduling, records turnover, records disposition, and records retrieval. More importantly, the handbook provides a single reference which encompasses the procedures set fourth in DOE Order 1324.2A, ''Records Disposition'' ASME NQA-1, ''Quality Assurance Program Requirements for Nuclear Facilities'' and DOE-AL 5700.6B, ''General Operations Quality Assurance.'' These documents dictate how an efficient system of records management will be achieved on the WIPP Project

Handbook of probability

CERN Document Server

Florescu, Ionut

2013-01-01

THE COMPLETE COLLECTION NECESSARY FOR A CONCRETE UNDERSTANDING OF PROBABILITY Written in a clear, accessible, and comprehensive manner, the Handbook of Probability presents the fundamentals of probability with an emphasis on the balance of theory, application, and methodology. Utilizing basic examples throughout, the handbook expertly transitions between concepts and practice to allow readers an inclusive introduction to the field of probability. The book provides a useful format with self-contained chapters, allowing the reader easy and quick reference. Each chapter includes an introductio

Handbook of metaheuristics

CERN Document Server

Potvin, Jean-Yves

2010-01-01

“… an excellent book if you want to learn about a number of individual metaheuristics." (U. Aickelin, Journal of the Operational Research Society, Issue 56, 2005, on the First Edition) The first edition of the Handbook of Metaheuristics was published in 2003 under the editorship of Fred Glover and Gary A. Kochenberger. Given the numerous developments observed in the field of metaheuristics in recent years, it appeared that the time was ripe for a second edition of the Handbook. When Glover and Kochenberger were unable to prepare this second edition, they suggested that Michel Gendreau and Jean-Yves Potvin should take over the editorship, and so this important new edition is now available. Through its 21 chapters, this second edition is designed to provide a broad coverage of the concepts, implementations and applications in this important field of optimization. Original contributors either revised or updated their work, or provided entirely new chapters. The Handbook now includes updated chapters on the b...

DOE underground storage tank waste remediation chemical processing hazards. Part I: Technology dictionary

International Nuclear Information System (INIS)

DeMuth, S.F.

1996-10-01

This document has been prepared to aid in the development of Regulating guidelines for the Privatization of Hanford underground storage tank waste remediation. The document has been prepared it two parts to facilitate their preparation. Part II is the primary focus of this effort in that it describes the technical basis for established and potential chemical processing hazards associated with Underground Storage Tank (UST) nuclear waste remediation across the DOE complex. The established hazards involve those at Sites for which Safety Analysis Reviews (SARs) have already been prepared. Potential hazards are those involving technologies currently being developed for future applications. Part I of this document outlines the scope of Part II by briefly describing the established and potential technologies. In addition to providing the scope, Part I can be used as a technical introduction and bibliography for Regulatory personnel new to the UST waste remediation, and in particular Privatization effort. Part II of this document is not intended to provide examples of a SAR Hazards Analysis, but rather provide an intelligence gathering source for Regulatory personnel who must eventually evaluate the Privatization SAR Hazards Analysis

Reference handbook: Level detectors

International Nuclear Information System (INIS)

1990-01-01

The purpose of this handbook is to provide Rocky Flats personnel with the information necessary to understand level measurement and detection. Upon completion of this handbook you should be able to do the following: List three reasons for measuring level. Describe the basic operating principles of the sight glass. Demonstrate proper techniques for reading a sight glass. Describe the basic operating principles of a float level detector. Describe the basic operating principles of a bubbler level indicating system. Explain the differences between a wet and dry reference leg indicating system, and describe how each functions. This handbook is designed for use by experienced Rocky Flats operators to reinforce and improve their current knowledge level, and by entry-level operators to ensure that they possess a minimum level of fundamental knowledge. Level Detectors is applicable to many job classifications and can be used as a reference for classroom work or for self-study. Although this reference handbook is by no means all-encompassing, you will gain enough information about this subject area to assist you in contributing to the safe operation of Rocky Flats Plant

Principles for disposal of radioactive and chemical hazardous wastes

International Nuclear Information System (INIS)

Merz, E. R.

1991-01-01

The double hazard of mixed wastes is characterized by several criteria: radioactivity on the one hand, and chemical toxicity, flammability, corrosiveness as well as chemical reactivity on the other hand. Chemotoxic waste normally has a much more complex composition than radioactive waste and appears in much larger quantities. However, the two types of waste have some properties in common when it comes to their long-term impact on health and the environment. In order to minimize the risk associated with mixed waste management, the material assigned for ultimate disposal should be thoroughly detoxified, inertized, or mineralized prior to conditioning and packaging. Good control over the environmental consequence of waste disposal requires that detailed criteria for tolerable contamination should be established, and that compliance with these criteria can be demonstrated. For radioactive waste, there has been an extensive international development of criteria to protect human health. For non-radioactive waste, derived criteria exist only for a limited number of substances

Practical electronics handbook

CERN Document Server

Sinclair, Ian R

1988-01-01

Practical Electronics Handbook, Second Edition covers information useful in electronics, with focus on mathematical conventions. The handbook discusses the passive (resistors, capacitors, band coding, and inductors) and active discrete (diodes, transistors and negative feedback) components; discrete component circuits; and transferring digital data. Linear I.C.s, which are the single-chip arrangements of amplifier circuits that are intended to be biased and operated in a linear way, and digital I.C.s, which process signals and consist of two significant voltage levels, are also considered. T

Handbook of unmanned aerial vehicles

CERN Document Server

Vachtsevanos, George

2015-01-01

The Handbook of Unmanned Aerial Vehicles is a reference text for the academic and research communities, industry, manufacturers, users, practitioners, Federal Government, Federal and State Agencies, the private sector, as well as all organizations that are and will be using unmanned aircraft in a wide spectrum of applications. The Handbook covers all aspects of UAVs, from design to logistics and ethical issues. It is also targeting the young investigator, the future inventor and entrepreneur by providing an overview and detailed information of the state-of-the-art as well as useful new concepts that may lead to innovative research. The contents of the Handbook include material that addresses the needs and ‘know how’ of all of the above sectors targeting a very diverse audience. The Handbook offers a unique and comprehensive treatise of everything one needs to know about unmanned aircrafts, from conception to operation, from technologies to business activities, users, OEMs, reference sources, conferences, ...

Integrated Circuit Electromagnetic Immunity Handbook

Science.gov (United States)

Sketoe, J. G.

2000-08-01

This handbook presents the results of the Boeing Company effort for NASA under contract NAS8-98217. Immunity level data for certain integrated circuit parts are discussed herein, along with analytical techniques for applying the data to electronics systems. This handbook is built heavily on the one produced in the seventies by McDonnell Douglas Astronautics Company (MDAC, MDC Report E1929 of 1 August 1978, entitled Integrated Circuit Electromagnetic Susceptibility Handbook, known commonly as the ICES Handbook, which has served countless systems designers for over 20 years). Sections 2 and 3 supplement the device susceptibility data presented in section 4 by presenting information on related material required to use the IC susceptibility information. Section 2 concerns itself with electromagnetic susceptibility analysis and serves as a guide in using the information contained in the rest of the handbook. A suggested system hardening requirements is presented in this chapter. Section 3 briefly discusses coupling and shielding considerations. For conservatism and simplicity, a worst case approach is advocated to determine the maximum amount of RF power picked up from a given field. This handbook expands the scope of the immunity data in this Handbook is to of 10 MHz to 10 GHz. However, the analytical techniques provided are applicable to much higher frequencies as well. It is expected however, that the upper frequency limit of concern is near 10 GHz. This is due to two factors; the pickup of microwave energy on system cables and wiring falls off as the square of the wavelength, and component response falls off at a rapid rate due to the effects of parasitic shunt paths for the RF energy. It should be noted also that the pickup on wires and cables does not approach infinity as the frequency decreases (as would be expected by extrapolating the square law dependence of the high frequency roll-off to lower frequencies) but levels off due to mismatch effects.

1995 Tier Two emergency and hazardous chemical inventory. Emergency Planning and Community Right-To-Know Act, Section 312

International Nuclear Information System (INIS)

1996-03-01

Tier Two reports are required as part of the Superfund compliance. The purpose is to provide state and local officials and the public with specific information on hazardous chemicals present at a facility during the past year. The facility is required to provide specific information on description, hazards, amounts, and locations of all hazardous materials. This report compiled such information for the Hanford Reservation

DOE handbook: Tritium handling and safe storage

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The DOE Handbook was developed as an educational supplement and reference for operations and maintenance personnel. Most of the tritium publications are written from a radiological protection perspective. This handbook provides more extensive guidance and advice on the null range of tritium operations. This handbook can be used by personnel involved in the full range of tritium handling from receipt to ultimate disposal. Compliance issues are addressed at each stage of handling. This handbook can also be used as a reference for those individuals involved in real time determination of bounding doses resulting from inadvertent tritium releases. This handbook provides useful information for establishing processes and procedures for the receipt, storage, assay, handling, packaging, and shipping of tritium and tritiated wastes. It includes discussions and advice on compliance-based issues and adds insight to those areas that currently possess unclear DOE guidance.

DOE handbook: Tritium handling and safe storage

International Nuclear Information System (INIS)

1999-03-01

The DOE Handbook was developed as an educational supplement and reference for operations and maintenance personnel. Most of the tritium publications are written from a radiological protection perspective. This handbook provides more extensive guidance and advice on the null range of tritium operations. This handbook can be used by personnel involved in the full range of tritium handling from receipt to ultimate disposal. Compliance issues are addressed at each stage of handling. This handbook can also be used as a reference for those individuals involved in real time determination of bounding doses resulting from inadvertent tritium releases. This handbook provides useful information for establishing processes and procedures for the receipt, storage, assay, handling, packaging, and shipping of tritium and tritiated wastes. It includes discussions and advice on compliance-based issues and adds insight to those areas that currently possess unclear DOE guidance

Springer Handbook of Acoustics

CERN Document Server

Rossing, Thomas D

2007-01-01

Acoustics, the science of sound, has developed into a broad interdisciplinary field encompassing the academic disciplines of physics, engineering, psychology, speech, audiology, music, architecture, physiology, neuroscience, and others. The Springer Handbook of Acoustics is an unparalleled modern handbook reflecting this richly interdisciplinary nature edited by one of the acknowledged masters in the field, Thomas Rossing. Researchers and students benefit from the comprehensive contents spanning: animal acoustics including infrasound and ultrasound, environmental noise control, music and human speech and singing, physiological and psychological acoustics, architectural acoustics, physical and engineering acoustics, signal processing, medical acoustics, and ocean acoustics. This handbook reviews the most important areas of acoustics, with emphasis on current research. The authors of the various chapters are all experts in their fields. Each chapter is richly illustrated with figures and tables. The latest rese...

Handbook of radioimmunoassay

International Nuclear Information System (INIS)

Abraham, G.E.

1977-01-01

This handbook provides clear, detailed descriptions of ways to set up radioimmunoassay procedures for a variety of polypeptides and low molecular weight compounds. It covers extensively the subjects of statistical evaluation of radioimmunoassay, instrumentation in radioimmunoassay, and radiation safety in the performance of radioimmunoassay. Related nonconventional methods are also discussed. Contributors to this handbook have presented their own procedures for performing the radioimmunoassay and their rationale for choosing particular reagents and conditions. Emphasis is on providing sufficient information to enable relatively inexperienced immunoassayists to set up assay systems with a minimum of difficulty

The small library manager's handbook

CERN Document Server

Graves, Alice

2014-01-01

The Small Library Manager's Handbook is for librarians working in all types of small libraries. It covers the everyday nuts-and-bolts operations that all librarians must perform. This handbook, written by experts who are small librarians themselves, will help all small librarians to do multiple jobs at the same time.

Handbook for TEAC Auditors, 2011

Science.gov (United States)

Teacher Education Accreditation Council, 2011

2011-01-01

This handbook is primarily for the Teacher Education Accreditation Council (TEAC) auditor. It is intended to help in preparing for audits of "Inquiry Briefs" and "Inquiry Brief Proposals" and to contribute to the writing of the audit report. This handbook contains a full description of the audit process, the responsibilities of…

Handbook of Technical Communication

OpenAIRE

Mehler , Alexander; Romary , Laurent; Gibbon , Dafydd

2012-01-01

International audience; The handbook "Technical Communication" brings together a variety of topics which range from the role of technical media in human communication to the linguistic, multimodal enhancement of present-day technologies. It covers the area of computer-mediated text, voice and multimedia communication as well as of technical documentation. In doing so, the handbook takes professional and private communication into account. Special emphasis is put on technical communication bas...

Hazardous Waste

Science.gov (United States)

... chemicals can still harm human health and the environment. When you throw these substances away, they become hazardous waste. Some hazardous wastes come from products in our homes. Our garbage can include such hazardous wastes as old batteries, bug spray cans and paint thinner. U.S. residents ...

Performance Assessment of Hazardous Air Pollutant (HAP)Free Chemical Paint Strippers on Military Coatings for Validation to Federal Specification TT-R-2918A

Science.gov (United States)

2016-03-01

ARL-TN-0742 ● MAR 2016 US Army Research Laboratory Performance Assessment of Hazardous Air Pollutant (HAP)–Free Chemical Paint...the originator. ARL-TN-0742 ● MAR 2016 US Army Research Laboratory Performance Assessment of Hazardous Air Pollutant (HAP...COVERED (From - To) 1–30 April 2014 4. TITLE AND SUBTITLE Performance Assessment of Hazardous Air Pollutant (HAP)–Free Chemical Paint Strippers

Handbook of the Economics of Education. Volume 2

Science.gov (United States)

Hanushek, Erik A., Ed.; Welch, F., Ed.

2006-01-01

The Handbooks in Economics series continues to provide the various branches of economics with handbooks which are definitive reference sources, suitable for use by professional researchers, advanced graduate students, or by those seeking a teaching supplement. With contributions from leading researchers, each Handbook presents an accurate,…

DOE handbook: Design considerations

International Nuclear Information System (INIS)

1999-04-01

The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline

DOE handbook: Design considerations

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-04-01

The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

Springer handbook of acoustics

CERN Document Server

2014-01-01

Acoustics, the science of sound, has developed into a broad interdisciplinary field encompassing the academic disciplines of physics, engineering, psychology, speech, audiology, music, architecture, physiology, neuroscience, and electronics. The Springer Handbook of Acoustics is also in his 2nd edition an unparalleled modern handbook reflecting this richly interdisciplinary nature edited by one of the acknowledged masters in the field, Thomas Rossing. Researchers and students benefit from the comprehensive contents. This new edition of the Handbook features over 11 revised and expanded chapters, new illustrations, and 2 new chapters covering microphone arrays  and acoustic emission.  Updated chapters contain the latest research and applications in, e.g. sound propagation in the atmosphere, nonlinear acoustics in fluids, building and concert hall acoustics, signal processing, psychoacoustics, computer music, animal bioacousics, sound intensity, modal acoustics as well as new chapters on microphone arrays an...

The first Australian-Asian conference on radiation science and nuclear medicine: conference handbook

International Nuclear Information System (INIS)

1991-01-01

The eighty two papers and posters presented at the conference covered a wide range of topics in the areas of radiation chemistry, industrial radiation processing, mammalian cells radiosensitivity, biological, chemical and physical radiation effects, radiochemistry. The handbook contains the conference program, the available abstracts, a list of participants and other relevant general information

Services Subcontract Technical Representative (STR) handbook

International Nuclear Information System (INIS)

Houston, D.H.

1997-06-01

The purpose of this handbook is to provide guidance to Bechtel Hanford, Inc. Subcontract Representatives in their assignments. It is the intention of this handbook to ensure that subcontract work is performed in accordance with the subcontract documents

Environmental regulations handbook for enhanced oil recovery. Final report

Energy Technology Data Exchange (ETDEWEB)

Wilson, T.D.

1980-08-01

A guide to environmental laws and regulations which have special significance for enhanced oil recovery (EOR) is presented. The Clean Air Act, the Clean Water Act, the Safe Drinking Water Act, Resource Conservation and Recovery Act, federal regulations, and state regulations are discussed. This handbook has been designed as a planning tool and a convenient reference source. The 16 states included comprise the major oil-producing states in various regions of the state. The major topics covered are: general guidelines for complying with environmental laws and regulations; air pollution control; water pollution control; protecting drinking water: underground injection control; hazardous waste management; and federal laws affecting siting or operation of EOR facilities. (DMC)

Solvent Handbook Database System user's manual

International Nuclear Information System (INIS)

1993-03-01

Industrial solvents and cleaners are used in maintenance facilities to remove wax, grease, oil, carbon, machining fluids, solder fluxes, mold release, and various other contaminants from parts, and to prepare the surface of various metals. However, because of growing environmental and worker-safety concerns, government regulations have already excluded the use of some chemicals and have restricted the use of halogenated hydrocarbons because they affect the ozone layer and may cause cancer. The Solvent Handbook Database System lets you view information on solvents and cleaners, including test results on cleaning performance, air emissions, recycling and recovery, corrosion, and non-metals compatibility. Company and product safety information is also available

32 CFR 644.529 - Supplemental agreement with owner of contaminated leased land.

Science.gov (United States)

2010-07-01

... ARMY (CONTINUED) REAL PROPERTY REAL ESTATE HANDBOOK Disposal Clearance of Explosive Hazards and Other... out of the existence on the premises of unexploded ammunition or chemical/biological agents. It is...

Handbook of Social Capital

DEFF Research Database (Denmark)

The Handbook of Social Capital balances the ‘troika' of sociology, political science and economics by offering important contributions to the study of bonding and bridging social capital networks. This inter-disciplinary Handbook intends to serve as a bridge for students and scholars within all...... the social sciences. The contributors explore the different scientific approaches that are all needed if international research is to embrace both the bright and the more shadowy aspects of social capital....

Soviet Space Program Handbook.

Science.gov (United States)

1988-04-01

in advance and some events were even broadcast live. Immediately following the first success- ful launch of their new Energia space launch vehicle in...early 1988. Just as a handbook written a couple of years ago would need updating with Mir, Energia , and the SL-16, this handbook will one day need up...1986. Johnson, Nicholas L. The Soviet Year in Space 1983. Colorado Springs, CO: Teledyne Brown Engineering, 1984. Lawton, A. " Energia - Soviet Super

Handbook for Greenhouse Rose Production Ethiopia

NARCIS (Netherlands)

Maden, van der E.; Hoogerwerf, F.; Marrewijk, van J.; Kerklaan, E.; Posthumus, J.; Boven, van A.; Elings, A.; Garcia Victoria, N.; Rikken, M.; Humphries, G.

2012-01-01

This practical handbook is prepared by DLV Plant, in collaboration with Wageningen UR, CBI and EHPEA, under assignment of the Ethiopia Netherlands Horticulture Partnership (ENHP). The following persons have contributed to this handbook: DVL Plant: Edwin van der Maden, Francis Hoogerwerf, Jeroen van

Handbook on modelling for discrete optimization

CERN Document Server

Pitsoulis, Leonidas; Williams, H

2006-01-01

The primary objective underlying the Handbook on Modelling for Discrete Optimization is to demonstrate and detail the pervasive nature of Discrete Optimization. While its applications cut across an incredibly wide range of activities, many of the applications are only known to specialists. It is the aim of this handbook to correct this. It has long been recognized that "modelling" is a critically important mathematical activity in designing algorithms for solving these discrete optimization problems. Nevertheless solving the resultant models is also often far from straightforward. In recent years it has become possible to solve many large-scale discrete optimization problems. However, some problems remain a challenge, even though advances in mathematical methods, hardware, and software technology have pushed the frontiers forward. This handbook couples the difficult, critical-thinking aspects of mathematical modeling with the hot area of discrete optimization. It will be done in an academic handbook treatment...

Handbook of nuclear data for safeguards

International Nuclear Information System (INIS)

Lammer, M.; Schwerer, O.

1991-06-01

This handbook contains nuclear data needed by safeguards users for their work. It was initiated by an IAEA working group, and the contents were defined by the relies to a questionnaire sent to safeguards specialists. This is a preliminary edition of the handbook for distribution to safeguards and nuclear data experts for review. The present edition of the handbook contains the following basic nuclear data: actinides: nuclear decay data, thermal neutron cross sections and resonance integrals, prompt neutron data, delayed neutron data; fission products: nuclear decay data, thermal neutron capture cross sections and resonance integrals; fission product yields. Also included are appendices that summarize the data requested by safeguards users, and that present a number of questions to them and to data experts on the data contained in this preliminary issue and about additional data for possible inclusion in future editions and updates of the handbook

Mechanical Design Handbook for Elastomers

Science.gov (United States)

Darlow, M.; Zorzi, E.

1986-01-01

Mechanical Design Handbook for Elastomers reviews state of art in elastomer-damper technology with particular emphasis on applications of highspeed rotor dampers. Self-contained reference but includes some theoretical discussion to help reader understand how and why dampers used for rotating machines. Handbook presents step-by-step procedure for design of elastomer dampers and detailed examples of actual elastomer damper applications.

Information security employee handbook: November 2010

OpenAIRE

2013-01-01

This handbook is a quick reference guide to some of the most important points of the London 2012 information security policy. This information security handbook outlines the policies that all staff, secondees, volunteers and certain third parties who process LOCOG information must comply with.

Hazard classification methodology

International Nuclear Information System (INIS)

Brereton, S.J.

1996-01-01

This document outlines the hazard classification methodology used to determine the hazard classification of the NIF LTAB, OAB, and the support facilities on the basis of radionuclides and chemicals. The hazard classification determines the safety analysis requirements for a facility

Newnes electronics assembly handbook

CERN Document Server

Brindley, Keith

2013-01-01

Newnes Electronics Assembly Handbook: Techniques, Standards and Quality Assurance focuses on the aspects of electronic assembling. The handbook first looks at the printed circuit board (PCB). Base materials, basic mechanical properties, cleaning of assemblies, design, and PCB manufacturing processes are then explained. The text also discusses surface mounted assemblies and packaging of electromechanical assemblies, as well as the soldering process. Requirements for the soldering process; solderability and protective coatings; cleaning of PCBs; and mass solder/component reflow soldering are des

Handbook of biomedical optics

CERN Document Server

Boas, David A

2011-01-01

Biomedical optics holds tremendous promise to deliver effective, safe, non- or minimally invasive diagnostics and targeted, customizable therapeutics. Handbook of Biomedical Optics provides an in-depth treatment of the field, including coverage of applications for biomedical research, diagnosis, and therapy. It introduces the theory and fundamentals of each subject, ensuring accessibility to a wide multidisciplinary readership. It also offers a view of the state of the art and discusses advantages and disadvantages of various techniques.Organized into six sections, this handbook: Contains intr

The digital media handbook

CERN Document Server

Dewdney, Andrew

2013-01-01

The new edition of The Digital Media Handbook presents an essential guide to the historical and theoretical development of digital media, emphasising cultural continuity alongside technological change, and highlighting the emergence of new forms of communication in contemporary networked culture.Andrew Dewdney and Peter Ride present detailed critical commentary and descriptive historical accounts, as well as a series of interviews from a range of digital media practitioners, including producers, developers, curators and artists.The Digital Media Handbook highlights key concerns of today's prac

Handbook on Decision Making

CERN Document Server

Jain, Lakhmi C

2010-01-01

The present "Volume 1: Techniques and Applications" of the "Handbook on Decision Making" presents a useful collection of AI techniques, as well as other complementary methodologies, that are useful for the design and development of intelligent decision support systems. Application examples of how these intelligent decision support systems can be utilized to help tackle a variety of real-world problems in different domains, such as business, management, manufacturing, transportation and food industries, and biomedicine, are presented. The handbook includes twenty condensed c

Rechargeable batteries applications handbook

CERN Document Server

1998-01-01

Represents the first widely available compendium of the information needed by those design professionals responsible for using rechargeable batteries. This handbook introduces the most common forms of rechargeable batteries, including their history, the basic chemistry that governs their operation, and common design approaches. The introduction also exposes reader to common battery design terms and concepts.Two sections of the handbook provide performance information on two principal types of rechargeable batteries commonly found in consumer and industrial products: sealed nickel-cad

Knowledge Service Engineering Handbook

CERN Document Server

Kantola, Jussi

2012-01-01

Covering the emerging field of knowledge service engineering, this groundbreaking handbook outlines how to acquire and utilize knowledge in the 21st century. Drawn on the expertise of the founding faculty member of the world's first university knowledge engineering service department, this book describes what knowledge services engineering means and how it is different from service engineering and service production. Presenting multiple cultural aspects including US, Finnish, and Korean, this handbook provides engineering, systemic, industry, and consumer use viewpoints to knowledge service sy

Handbook of Qualitative Research. Second Edition.

Science.gov (United States)

Denzin, Norman K., Ed.; Lincoln, Yvonna S., Ed.

This handbook's second edition represents the state of the art for the theory and practice of qualitative inquiry. It features eight new topics, including autoethnography, critical race theory, applied ethnography, queer theory, and "testimonio"every chapter in the handbook has been thoroughly revised and updated. The book…

The biodiesel handbook

National Research Council Canada - National Science Library

Knothe, Gerhard; Krahl, Jurgen; Van Gerpen, Jon Harlan

2010-01-01

.... The Biodiesel Handbook delivers solutions to issues associated with biodiesel feedstocks, production issues, quality control, viscosity, stability, applications, emissions, and other environmental...

Springer handbook of robotics

CERN Document Server

Khatib, Oussama

2016-01-01

The second edition of this handbook provides a state-of-the-art cover view on the various aspects in the rapidly developing field of robotics. Reaching for the human frontier, robotics is vigorously engaged in the growing challenges of new emerging domains. Interacting, exploring, and working with humans, the new generation of robots will increasingly touch people and their lives. The credible prospect of practical robots among humans is the result of the scientific endeavour of a half a century of robotic developments that established robotics as a modern scientific discipline. The ongoing vibrant expansion and strong growth of the field during the last decade has fueled this second edition of the Springer Handbook of Robotics. The first edition of the handbook soon became a landmark in robotics publishing and won the American Association of Publishers PROSE Award for Excellence in Physical Sciences & Mathematics as well as the organization’s Award for Engineering & Technology. The second edition o...

Criticality handbook. Pt. 1

International Nuclear Information System (INIS)

Heinicke, W.; Krug, H.; Thomas, W.; Weber, W.; Gmal, B.

1985-12-01

The GRS Criticality Handbook is intended as a source of information on criticality problems for the persons concerned in industry, authorities, or research laboratories. It is to serve as a guide allowing quick and appropriate evaluation of criticality problems during design or erection of nuclear installations. This present issue replaces the one published in 1979, presenting revised and new data in a modified construction, but within the framework of the proven basic structure of the Handbook. Some fundamental knowledge is required of criticality problems and the relevant terms and definitions of nuclear safety, in order to fully deploy the information given. Part 1 of the Handbook therefore first introduces terminology and definitions, followed by experimental methods and calculation models for criticality calculations. The next chapters deal with the function and efficiency of neutron reflectors and neutron absorbers, measuring methods for criticality monitoring, organisational safety measures, and criticality accidents and their subsequent analysis. (orig./HP) [de

Speech-Language-Pathology and Audiology Handbook.

Science.gov (United States)

New York State Education Dept., Albany. Office of the Professions.

The handbook contains State Education Department rules and regulations that govern speech-language pathology and audiology in New York State. The handbook also describes licensure and first registration as a licensed speech-language pathologist or audiologist. The introduction discusses professional regulation in New York State while the second…

Federal environmental inspections handbook

International Nuclear Information System (INIS)

1991-10-01

This Federal Environmental Inspection Handbook has been prepared by the Department of Energy (DOE), Office of Environmental Guidance, RCRA/CERCLA Division (EH-231). It is designed to provide DOE personnel with an easily accessible compilation of the environmental inspection requirements under Federal environmental statutes which may impact DOE operations and activities. DOE personnel are reminded that this Handbook is intended to be used in concert with, and not as a substitute for, the Code of Federal Regulations (CFR). Federal Register (FR), and other applicable regulatory documents

Handbook of optical design

CERN Document Server

Malacara-Hernández, Daniel

2013-01-01

Handbook of Optical Design, Third Edition covers the fundamental principles of geometric optics and their application to lens design in one volume. It incorporates classic aspects of lens design along with important modern methods, tools, and instruments, including contemporary astronomical telescopes, Gaussian beams, and computer lens design. Written by respected researchers, the book has been extensively classroom-tested and developed in their lens design courses. This well-illustrated handbook clearly and concisely explains the intricacies of optical system design and evaluation. It also di

Nanoelectronic device applications handbook

CERN Document Server

Morris, James E

2013-01-01

Nanoelectronic Device Applications Handbook gives a comprehensive snapshot of the state of the art in nanodevices for nanoelectronics applications. Combining breadth and depth, the book includes 68 chapters on topics that range from nano-scaled complementary metal-oxide-semiconductor (CMOS) devices through recent developments in nano capacitors and AlGaAs/GaAs devices. The contributors are world-renowned experts from academia and industry from around the globe. The handbook explores current research into potentially disruptive technologies for a post-CMOS world.These include: Nanoscale advance

Resource handbook on transport risk assessment (invited paper)

International Nuclear Information System (INIS)

Chen, S.Y.; Biwer, B.M.; Monette, F.A.; Luna, R.; Weiner, R.; Yoshimura, R.; Detrick, C.; Dunn, T.; Maheras, S.; Bhatnager, S.; Kapoor, A.K.

2003-01-01

The US Department of Energy's (DOE's) National Transportation Program established the DOE Transportation Risk Assessment Working Group (TRAWG) to develop the Resource Handbook on DOE Transportation Risk Assessment, published in July 2002. The working group is comprised of technical experts representing DOE national laboratories, the DOE Naval Reactors Program, and DOE contractors. The motivation behind preparing this handbook was to document and disseminate lessons learned and information accumulated from more than 20 years of experience by DOE and its contractors in preparing transport risk assessments that address the shipment of virtually all types of radioactive materials and wastes. The handbook is intended to serve as a primary source of information on conducting transport risk assessments for shipments of radioactive materials or wastes under both normal and accident conditions. The paper provides an overview of the information contained in the handbook. It should be recognised that development of radioactive materials transport risk assessment is an ongoing process, and that the analysis methods are regularly improved. The Resource Handbook on DOE Transportation Risk Assessment appears on the Web at www.ntp.doe.gov/transrisk_handbook.pdf. (author)

Hazard ranking systems for chemical wastes and chemical waste sites

International Nuclear Information System (INIS)

Waters, R.D.; Parker, F.L.; Crutcher, M.R.

1991-01-01

Hazardous materials and substances have always existed in the environment. Mankind has evolved to live with some degree of exposure to toxic materials. Until recently the risk has been from natural toxins or natural background radiation. While rapid technological advances over the past few decades have improved the lifestyle of our society, they have also dramatically increased the availability, volume and types of synthetic and natural hazardous materials. Many of their effects are as yet uncertain. Products and manufacturing by-products that no longer serve a useful purpose are deemed wastes. For some waste products land disposal will always be their ultimate fate. Hazardous substances are often included in the waste products. One needs to classify wastes by degree of hazard (risk). Risk (degree of probability of loss) is usually defined for risk assessment as probability of an occurrence times the consequences of the occurrence. Perhaps even more important than the definition of risk is the choice of a risk management strategy. The choice of strategy will be strongly influenced by the decision criteria used. Those decision criteria could be utility (the greatest happiness of the greatest number), rights or technology based or some combination of the three. It is necessary to make such choices about the definition of risks and criteria for management. It is clear that these are social (i.e., political) and value choices and science has little to say on this matter. This is another example of what Alvin Weinberg has named Transcience where the subject matter is scientific and technical but the choices are social, political and moral. This paper shall deal only with the scientific and technical aspects of the hazardous waste problem to create a hazardous substances classification system

Saving time with a computerised handbook

International Nuclear Information System (INIS)

Henrie, D.K.

1993-01-01

The DE/CAASE computerised engineering handbook (Desktop Engineering, Mahwah, NJ, USA) is a software tool designed to automate a wide variety of engineering tasks that are typically performed with an engineering handbook and hand calculator. It significantly reduces the time taken to perform these tasks. For example, instead of spending 60 minutes on determining section properties of composite sections in control room panels and other equipment by hand, it might take less than 5 minutes by using the computerised handbook. Similarly, mode shapes and frequencies of simple structures may take less than 10 minutes to calculate, compared with the hours it used to take. (author)

Handbook of divorce and relationship dissolution

CERN Document Server

Fine, Mark A

2013-01-01

This Handbook presents up-to-date scholarship on the causes and predictors, processes, and consequences of divorce and relationship dissolution. Featuring contributions from multiple disciplines, this Handbook reviews relationship termination, including variations depending on legal status, race/ethnicity, and sexual orientation. The Handbook focuses on the often-neglected processes involved as the relationship unfolds, such as infidelity, hurt, and remarriage. It also covers the legal and policy aspects, the demographics, and the historical aspects of divorce. Intended for researchers, practitioners, counselors, clinicians, and advanced students in psychology, sociology, family studies, communication, and nursing, the book serves as a text in courses on divorce, marriage and the family, and close relationships.

Exploration for atomic minerals, Pt. 4: training course handbook, V. 3, 1997

International Nuclear Information System (INIS)

Singh, Rajendra; Dwivedy, K.K.

1997-01-01

The training course handbook containing four parts was prepared by scientists of Atomic Minerals Division who have put in several years of work and gained expertise in their respective fields. Pt. 4 contains a variety of articles on practical aspects of geological mapping, sampling, and ore reserves estimations and laboratory techniques in ore extraction and chemical analysis of geological samples. Papers relevant to INIS are indexed separately

Action Handbook for Automotive Service Instruction.

Science.gov (United States)

Motor Vehicle Manufacturers Association of the U.S., Inc., Detroit, MI.

The document is a handbook for a vocational automotive service education program which was formulated as a result of a four-day series of intensive workshops called the National Automotive Service Vocational Education Conference. The handbook discusses the major components of an automotive service vocational education program and aspects of their…

15th AINSE radiation chemistry conference, 5-7 November, 1990: conference handbook (programme, abstracts and general information)

International Nuclear Information System (INIS)

1990-01-01

The conference was held in association with the Polymer Division of the Royal Chemical Institute. The handbook includes abstracts of 40 papers from which 37 have been separately indexed. Three items were considered to be outside of the subject scope of INIS

NASA Risk Management Handbook. Version 1.0

Science.gov (United States)

Dezfuli, Homayoon; Benjamin, Allan; Everett, Christopher; Maggio, Gaspare; Stamatelatos, Michael; Youngblood, Robert; Guarro, Sergio; Rutledge, Peter; Sherrard, James; Smith, Curtis;

Handbook of vacuum physics

CERN Document Server

1964-01-01

Handbook of Vacuum Physics, Volume 3: Technology is a handbook of vacuum physics, with emphasis on the properties of miscellaneous materials such as mica, oils, greases, waxes, and rubber. Accurate modern tables of physical constants, properties of materials, laboratory techniques, and properties of commercial pumps, gauges, and leak detectors are presented. This volume is comprised of 12 chapters and begins with a discussion on pump oils, divided into rotary pump oils and vapor pump oils. The next chapter deals with the properties and applications of greases, including outgassing and vapor pr

Information security management handbook

CERN Document Server

2002-01-01

The Information Security Management Handbook continues its tradition of consistently communicating the fundamental concepts of security needed to be a true CISSP. In response to new developments, Volume 4 supplements the previous volumes with new information covering topics such as wireless, HIPAA, the latest hacker attacks and defenses, intrusion detection, and provides expanded coverage on security management issues and applications security. Even those that don't plan on sitting for the CISSP exam will find that this handbook is a great information security reference.The changes in the tech

The french criticality handbook

International Nuclear Information System (INIS)

Maubert, L.; Puit, J.C.

1987-01-01

The french criticality handbook, published in 1978 by the ''Commissariat a l'Energie Atomique'', is presented with the main targets aimed by the writer and the main choices taken relating to fissile mediums, reflection conditions, dilution curves. The validation of the critical values is presented as one of the most important aspects of this handbook which is mainly intended, in the mind of the author, to specialists well advertised in the field of criticality. The complements which have been introduced since 1978 and those which are foreseen in a near future are also detailed. (author)

Information security management handbook

CERN Document Server

Tipton, Harold F

2003-01-01

Since 1993, the Information Security Management Handbook has served not only as an everyday reference for information security practitioners but also as an important document for conducting the intense review necessary to prepare for the Certified Information System Security Professional (CISSP) examination. Now completely revised and updated and in its fifth edition, the handbook maps the ten domains of the Information Security Common Body of Knowledge and provides a complete understanding of all the items in it. This is a ...must have... book, both for preparing for the CISSP exam and as a c

Handbook of surveillance technologies

CERN Document Server

Petersen, JK

2012-01-01

From officially sanctioned, high-tech operations to budget spy cameras and cell phone video, this updated and expanded edition of a bestselling handbook reflects the rapid and significant growth of the surveillance industry. The Handbook of Surveillance Technologies, Third Edition is the only comprehensive work to chronicle the background and current applications of the full-range of surveillance technologies--offering the latest in surveillance and privacy issues.Cutting-Edge--updates its bestselling predecessor with discussions on social media, GPS circuits in cell phones and PDAs, new GIS s

Software quality assurance handbook

Energy Technology Data Exchange (ETDEWEB)

1990-09-01

There are two important reasons for Software Quality Assurance (SQA) at Allied-Signal Inc., Kansas City Division (KCD): First, the benefits from SQA make good business sense. Second, the Department of Energy has requested SQA. This handbook is one of the first steps in a plant-wide implementation of Software Quality Assurance at KCD. The handbook has two main purposes. The first is to provide information that you will need to perform software quality assurance activities. The second is to provide a common thread to unify the approach to SQA at KCD. 2 figs.

Measurements and models for hazardous chemical and mixed wastes. 1998 annual progress report

International Nuclear Information System (INIS)

Holcomb, C.; Louie, B.; Mullins, M.E.; Outcalt, S.L.; Rogers, T.N.; Watts, L.

1998-01-01

'Aqueous waste of various chemical compositions constitutes a significant fraction of the total waste produced by industry in the US. A large quantity of the waste generated by the US chemical process industry is waste water. In addition, the majority of the waste inventory at DoE sites previously used for nuclear weapons production is aqueous waste. Large quantities of additional aqueous waste are expected to be generated during the clean-up of those sites. In order to effectively treat, safely handle, and properly dispose of these wastes, accurate and comprehensive knowledge of basic thermophysical property information is paramount. This knowledge will lead to huge savings by aiding in the design and optimization of treatment and disposal processes. The main objectives of this project are: Develop and validate models that accurately predict the phase equilibria and thermodynamic properties of hazardous aqueous systems necessary for the safe handling and successful design of separation and treatment processes for hazardous chemical and mixed wastes. Accurately measure the phase equilibria and thermodynamic properties of a representative system (water + acetone + isopropyl alcohol + sodium nitrate) over the applicable ranges of temperature, pressure, and composition to provide the pure component, binary, ternary, and quaternary experimental data required for model development. As of May, 1998, nine months into the first year of a three year project, the authors have made significant progress in the database development, have begun testing the models, and have been performance testing the apparatus on the pure components.'

Effectuality of Cleaning Workers' Training and Cleaning Enterprises' Chemical Health Hazard Risk Profiling

Directory of Open Access Journals (Sweden)

Abdulqadir M. Suleiman

2015-12-01

Conclusion: Training of cleaning workers lacks the prerequisite for suitability and effectiveness to counter risks of chemical health hazards. There is dereliction of duty by management in the sector resulting in a lack of competence among the cleaning workers. Instituting acceptable easily attainable safety competence level for cleaners will conduce to risk reduction, and enforcement of attainment of the competence level would be a positive step.

Fault tree handbook

International Nuclear Information System (INIS)

Haasl, D.F.; Roberts, N.H.; Vesely, W.E.; Goldberg, F.F.

1981-01-01

This handbook describes a methodology for reliability analysis of complex systems such as those which comprise the engineered safety features of nuclear power generating stations. After an initial overview of the available system analysis approaches, the handbook focuses on a description of the deductive method known as fault tree analysis. The following aspects of fault tree analysis are covered: basic concepts for fault tree analysis; basic elements of a fault tree; fault tree construction; probability, statistics, and Boolean algebra for the fault tree analyst; qualitative and quantitative fault tree evaluation techniques; and computer codes for fault tree evaluation. Also discussed are several example problems illustrating the basic concepts of fault tree construction and evaluation

Biofuel technology handbook. 2. ed.

Energy Technology Data Exchange (ETDEWEB)

Rutz, Dominik; Janssen, Rainer

2008-01-15

This comprehensive handbook was created in order to promote the production and use of biofuels and to inform politicians, decision makers, biofuel traders and all other relevant stakeholders about the state-of-the-art of biofuels and relevant technologies. The large variety of feedstock types and different conversion technologies are described. Explanations about the most promising bio fuels provide a basis to discuss about the manifold issues of biofuels. The impartial information in this handbook further contributes to diminish existing barriers for the broad use of biofuels. Emphasis of this handbook is on first generation biofuels: bio ethanol, Biodiesel, pure plant oil, and bio methane. It also includes second generation biofuels such as BTL-fuels and bio ethanol from lingo-cellulose as well as bio hydrogen. The whole life cycle of bio fuels is assessed under technical, economical, ecological, and social aspect. Characteristics and applications of bio fuels for transport purposes are demonstrated and evaluated. This is completed by an assessment about the most recent studies on biofuel energy balances. This handbook describes the current discussion about green house gas (GHG) balances and sustainability aspects. GHG calculation methods are presented and potential impacts of biofuel production characterized: deforestation of rainforests and wetlands, loss of biodiversity, water pollution, human health, child labour, and labour conditions.

European alerting and monitoring data as inputs for the risk assessment of microbiological and chemical hazards in spices and herbs

NARCIS (Netherlands)

Banach, J.L.; Stratakou, I.; Fels, van der Ine; Besten, den H.M.W.; Zwietering, M.H.

2016-01-01

Food chains are susceptible to contaminations from food-borne hazards, including pathogens and chemical contaminants. An assessment of the potential product-hazard combinations can be supported by using multiple data sources. The objective of this study was to identify the main trends of food

77 FR 59891 - Proposed Information Collection; Comment Request; Chemical Weapons Convention Declaration and...

Science.gov (United States)

2012-10-01

... Request; Chemical Weapons Convention Declaration and Report Handbook and Forms AGENCY: Bureau of Industry.... Abstract The Chemical Weapons Convention Implementation Act of 1998 and Commerce Chemical Weapons... Chemical Weapons Convention (CWC), an international arms control treaty. II. Method of Collection Submitted...

Handbook of laboratory health and safety measures

International Nuclear Information System (INIS)

Pal, S.B.

1985-01-01

Eighteen chapters deal with all kinds of possible health and safety hazards, chemical, physical and biological, arising in laboratories. Two chapters, on X-ray hazards - diagnostic and therapeutic, and radiation protection in radionuclide investigations, respectively are indexed separately. (U.K.)

化工企业危化品安全管理解析%Analysis on Safety Management of Hazardous Chemicals in Chemical Enterprises

Institute of Scientific and Technical Information of China (English)

韩宇

2016-01-01

With the development of economy in our country,chemical enterprises in our country are developing rapidly.The dangerous chemicals produced by chemical enterprises have certain function under specific environment.The chemical enterprise must make good safety management measures,To develop clear safety rules and sound rules and regulations to enhance the safety awareness of chemical workers,the use of hazardous chemicals and the use of good norms,enhance the safety of chemical enterprises,hazardous chemicals,and effectively prevent the occurrence of accidents,On the current chemical enterprises in China's chemical safety supervision and management of the existing problems,and in accordance with existing problems to develop a clear safety management measures to enhance the safety of chemical companies.%随着我国经济的不断发展，我国化工企业也在飞速的发展，在化工企业生产的危险化学品在特定的环境下有着特定的作用，化工企业一定要制定良好的安全管理措施，制定明确的安全准则和健全的规章制度，提升工作人员的安全意识，对危险化学品的使用范围和使用过程进行良好的规范，提升化工企业危险化学品的安全性，有效防止安全事故的发生。对现今我国化工企业危险化学品安全管理监督存在的问题进分析，并根据存在的问题制定明确的安全管理措施，以提升化工企业的安全性。

The substitution of hazardous chemicals in the international context - Opportunity for promoting sustainable chemistry

DEFF Research Database (Denmark)

Weber, R.; Lissner, L.; Fantke, Peter

While a wide range of sustainable/green chemicals for various applications is available, often only certain types of hazardous or unsustainably produced chemicals are continued to be used out of different reasons (“lock-in problem”) 1,2. One challenge is that policy makers and industries...... in the alternatives assessment process on international level. The POPs phase out document links also to the web-platform SUBSPORT (www.subsport.eu) which has been developed in the frame of an EU project for safer alternatives to toxic chemicals. In this presentation the Stockholm Convention alternatives assessment...... in particular in developing and transition countries do not know about more sustainable and green alternatives for a chemical in a particular application. Methodologies and tools are, hence, needed for the communication and dissemination of information on more sustainable alternatives. The substitution...

Handbook of digital games and entertainment technologies

NARCIS (Netherlands)

Nakatsu, R.; Rauterberg, G.W.M.; Ciancarini, P.

2017-01-01

The topics treated in this handbook cover all areas of games and entertainment technologies, such as digital entertainment; technology, design/art, and sociology. The handbook consists of contributions from top class scholars and researchers from the interdisciplinary topic areas. The aim of this

The Fuel Handbook 2012; Braenslehandboken 2012

Energy Technology Data Exchange (ETDEWEB)

Stroemberg, Birgitta; Herstad Svaerd, Solvie

2012-04-15

This fuel handbook provides, from a plant owner's perspective, a method of evaluating different fuels on the market. The fuel handbook concerns renewable fuels (but not including household waste) that are available on the Swedish market today or which are judged to have the potential to be available within the next ten years. The handbook covers 31 different fuels. Analysis data, special properties, operating experience, recommendations, risks when using the fuels and literature references are outlined for each fuel. The handbook also contains 1. A proposed route to follow when one plans to introduce a new fuel. Those analyses and tests one should perform to reduce the risk of encountering problems. 2. A summary of relevant laws and taxes for energy production, with directions as to where relevant documentation can be found. 3. Theory and background to judge the fuel's combustion, ash and corrosion properties and different methods that can be used for such judgement. 4. Summary of standards, databases and handbooks for biomass fuels and other solid fuels, and details on where further information on the fuels can be found, with the help of links to different web sites. Included in the annexes are 1. A proposal for a standard procedure for test burning of fuel. 2. Calculations procedures for, amongst others, heating value, flue gas composition and key numbers. In addition, calculations routines for different units for a number of different applications are provided

The Fuel Handbook 2012; Braenslehandboken 2012

Energy Technology Data Exchange (ETDEWEB)

Stroemberg, Birgitta; Herstad Svaerd, Solvie

2012-04-15

This fuel handbook provides, from a plant owner's perspective, a method of evaluating different fuels on the market. The fuel handbook concerns renewable fuels (but not including household waste) that are available on the Swedish market today or which are judged to have the potential to be available within the next ten years. The handbook covers 31 different fuels. Analysis data, special properties, operating experience, recommendations, risks when using the fuels and literature references are outlined for each fuel. The handbook also contains 1. A proposed route to follow when one plans to introduce a new fuel. Those analyses and tests one should perform to reduce the risk of encountering problems. 2. A summary of relevant laws and taxes for energy production, with directions as to where relevant documentation can be found. 3. Theory and background to judge the fuel's combustion, ash and corrosion properties and different methods that can be used for such judgement. 4. Summary of standards, databases and handbooks for biomass fuels and other solid fuels, and details on where further information on the fuels can be found, with the help of links to different web sites. Included in the annexes are 1. A proposal for a standard procedure for test burning of fuel. 2. Calculations procedures for, amongst others, heating value, flue gas composition and key numbers. In addition, calculations routines for different units for a number of different applications are provided

Crisis Communication (Handbooks of Communication Science Vol. 23)

DEFF Research Database (Denmark)

Johansen, Winni

Vol. 23 - The Handbook of Communication Science General editors: Peter J. Schultz and Paul Cobley......Vol. 23 - The Handbook of Communication Science General editors: Peter J. Schultz and Paul Cobley...

School handbooks from yesterday to today: Thefrench example

Directory of Open Access Journals (Sweden)

Alain CHOPPIN

2013-11-01

Full Text Available The school handbook has been for a long time devaluated for bibliographers, archivists and even for the historian community, but durign the last decades and increasing interest hast emerged among educational and textbook historians. First of all, the author the reasons of a textbook as an important source for the historian and the motives of such an unexpected interest for this subject, and afterwards make a brief historical review of the French school edition, specially focoused to the evolution of the handbook as a pedagogical tool. He tries to enlighten the different parameters that could have been successively implicated in the concept and use of handbooks in France, joining it closely current questions (increasingly complex handbooks, incidence of advanced technologies, teacher's training.

DOE/EPRI Electricity Storage Handbook in Collaboration with NRECA.

Energy Technology Data Exchange (ETDEWEB)

Akhil, Abbas Ali [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Huff, Georgianne [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Currier, Aileen B. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Kaun, Benjamin C [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Rastler, Dan M. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Chen, Stella Bingqing [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Cotter, Andrew L. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Bradshaw, Dale T. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Gauntlett, William D. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

2015-02-01

The Electricity Storage Handbook (Handbook) is a how - to guide for utility and rural cooperative engineers, planners, and decision makers to plan and implement energy storage projects. The Handbook also serves as an information resource for investors and venture capitalists, providing the latest developments in technologies and tools to guide their evaluation s of energy storage opportunities. It includes a comprehensive database of the cost of current storage systems in a wide variety of electric utility and customer services, along with interconnection schematics. A list of significant past and present energy storage projects is provided for a practical perspective . This Handbook, jointly sponsored by the U.S. Department of Energy and the Electric Power Research Institute in collaboration with the National Rural Electric Cooperative Association, is published in electronic form at www.sandia.gov/ess. This Handbook is best viewed online.

Handbook of signal processing systems

CERN Document Server

Deprettere, Ed; Leupers, Rainer; Takala, Jarmo

2013-01-01

Handbook of Signal Processing Systems is organized in three parts. The first part motivates representative applications that drive and apply state-of-the art methods for design and implementation of signal processing systems; the second part discusses architectures for implementing these applications; the third part focuses on compilers and simulation tools, describes models of computation and their associated design tools and methodologies. This handbook is an essential tool for professionals in many fields and researchers of all levels.

Handbook of relativistic quantum chemistry

International Nuclear Information System (INIS)

Liu, Wenjian

2017-01-01

This handbook focuses on the foundations of relativistic quantum mechanics and addresses a number of fundamental issues never covered before in a book. For instance: How can many-body theory be combined with quantum electrodynamics? How can quantum electrodynamics be interfaced with relativistic quantum chemistry? What is the most appropriate relativistic many-electron Hamiltonian? How can we achieve relativistic explicit correlation? How can we formulate relativistic properties? - just to name a few. Since relativistic quantum chemistry is an integral component of computational chemistry, this handbook also supplements the ''Handbook of Computational Chemistry''. Generally speaking, it aims to establish the 'big picture' of relativistic molecular quantum mechanics as the union of quantum electrodynamics and relativistic quantum chemistry. Accordingly, it provides an accessible introduction for readers new to the field, presents advanced methodologies for experts, and discusses possible future perspectives, helping readers understand when/how to apply/develop the methodologies.

The Problem of Assessment for Radionuclide and Chemical Hazard to People Heredity and Health

International Nuclear Information System (INIS)

Suskov, Igor I.; Glouchtchenko, Alexandre I.

2003-01-01

In the 21th century the assessment of the hazard to human heredity and health from the radionuclide and chemical environmental pollution becomes of prime social importance since it is related to the problems of utilization of great amounts of radioactive and chemical wastes, spent nuclear fuel, weapon plutonium, nuclear reactors and emergency discharges of isotopes which in total is higher than 1 billion Ci. Long-term cytogenetic monitoring of nuclear and chemical plant workers, local human populations of radioactive waste areas and radionuclide polluted territories has revealed that the level and spectrum of induced chromosome aberrations in blood lymphocytes correlate with the type, dose and duration of exposure. There is very strong evidence that the yield of chromosome aberrations (Y) is related to the dose (D) by the equation: Y=Ao+aD+bD 2 . Therefore the radiation/radionuclide risk (R(D) ) will correspond to a absorbed dose and its aberrational/mutational consequences ('doubling dose' coefficient). Increased levels of chromosome aberrations in the human body very often precede the development of several syndromes: chronic fatigue, secondary immune deficiency, early aging, reproductive dysfunction, oncological diseases and etc. The increased levels of chromosome aberrations in blood lymphocytes can serve as objective bio indicators of radiation and chemical risk to human heredity and health. Thus, monitoring of chromosome and genome aberrations must be of strategical importance in the system of governmental service for minimization of radionuclide and chemical hazard to human heredity and health the necessity of organization of which has already matured. The above mentioned confirms the necessity of founding a European network for ecological-genetic monitoring with 'Internet' translation of information on radionuclide composition and chromosome aberration levels in people, inhabiting polluted areas

Los Alamos Controlled Air Incinerator for hazardous chemical and mixed radioactive wastes

International Nuclear Information System (INIS)

Vavruska, J.S.; Borduin, L.C.; Hutchins, D.A.; Koenig, R.A.; Warner, C.L.

1986-01-01

The Los Alamos Controlled Air Incinerator (CAI) is currently the only radioactive waste incineration facility in the US permitted to treat polychlorinated biphenyls (PCBs). The CAI was developed in the mid-1970's as a demonstration system for volume reduction of transuranic (TRU) contaminated combustible solid wastes. It has since undergone additions and modifications to accommodate hazardous chemical wastes in response to a need within the Department of Energy (DOE) to treat mixed radioactive/chemical wastes. An overview of these additions which include a liquid feed system, a high intensity liquid injection burner, and an activated carbon adsorption unit is presented here. Also included is a discussion of the procedures required for Toxic Substances Control Act (TSCA) and Resource Conservation and Recovery Act (RCRA) permitting of the CAI

Handbook of Signal Processing in Acoustics

CERN Document Server

Havelock, David; Vorländer, Michael

2009-01-01

The Handbook of Signal Processing in Acoustics presents signal processing as it is practiced in the field of acoustics. The Handbook is organized by areas of acoustics, with recognized leaders coordinating the self-contained chapters of each section. It brings together a wide range of perspectives from over 100 authors to reveal the interdisciplinary nature of signal processing in acoustics. Success in acoustic applications often requires juggling both the acoustic and the signal processing parameters of the problem. This handbook brings the key issues from both into perspective and is complementary to other reference material on the two subjects. It is a unique resource for experts and practitioners alike to find new ideas and techniques within the diversity of signal processing in acoustics.

Handbook of Research on Environmental Taxation

DEFF Research Database (Denmark)

, their environmental and economic impact and, finally, the larger question of the role of taxation among other policy approaches to environmental protection. Intermixing theory with case studies, the Handbook offers readers lessons that can be applied around the world. It identifies key bodies of research for people......The Handbook of Research on Environmental Taxation captures the state of the art of research on environmental taxation. Written by 36 specialists in environmental taxation from 16 countries, it takes an interdisciplinary and international approach, focusing on issues that are universal to using...... taxation to achieve environmental goals. The Handbook explores the conceptual foundations of environmental taxation, essential elements for designing environmental tax measures, factors that influence the acceptance of environmental taxation, the variety of ways to implement environmental taxes...

Notification: FY 2012 Management Challenges and Internal Control Weaknesses for the Chemical Safety and Hazard Investigation Board

Science.gov (United States)

February 1, 2012. The EPA Office of Inspector General is beginning work to update our list of areas we consider to be the key management challenges confronting the Chemical Safety and Hazard Investigation Board.

Superfund at work: Hazardous waste cleanup efforts nationwide, spring 1993 (Radium Chemical Site profile, Queens, New York)

International Nuclear Information System (INIS)

1993-01-01

The Radium Chemical hazardous waste site in Queens, New York was contaminated with radium, posing a grave potential threat to the community. The US Environmental Protection Agency (EPA) used the Superfund program to design a long-term cleanup for the site using input from citizens and the business community. Superfund staff: Mobilized a quick cleanup action to remove 10,000 small containers of radium; Developed a streamlined approach to long-term cleanup; Secured the site to reduce the possibility of radiation exposure to the local residents; Cooperated with the community to design a well-organized emergency response plan; and Educated local citizens about site hazards, incorporating community concerns into the cleanup process. The Radium Chemical site is a clear example of EPA's effective management and problem-solving strategies at Superfund sites

Chemical Emergencies

Science.gov (United States)

When a hazardous chemical has been released, it may harm people's health. Chemical releases can be unintentional, as in the case of an ... the case of a terrorist attack with a chemical weapon. Some hazardous chemicals have been developed by ...

76 FR 25376 - Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of...

Science.gov (United States)

2011-05-04

...'') applies to laboratories that use hazardous chemicals in accordance with the Standard's definitions for...-reliability measures; worker information-and-training programs; conditions under which the employer must... validity of the methodology and assumptions used; The quality, utility, and clarity of the information...

Materials handbook for fusion energy systems

Science.gov (United States)

Davis, J. W.; Marchbanks, M. F.

A materials data book for use in the design and analysis of components and systems in near term experimental and commercial reactor concepts has been created by the Office of Fusion Energy. The handbook is known as the Materials Handbook for Fusion Energy Systems (MHFES) and is available to all organizations actively involved in fusion related research or system designs. Distribution of the MHFES and its data pages is handled by the Hanford Engineering Development Laboratory (HEDL), while its direction and content is handled by McDonnell Douglas Astronautics Company — St. Louis (MDAC-STL). The MHFES differs from other handbooks in that its format is geared more to the designer and structural analyst than to the materials scientist or materials engineer. The format that is used organizes the handbook by subsystems or components rather than material. Within each subsystem is information pertaining to material selection, specific material properties, and comments or recommendations on treatment of data. Since its inception a little more than a year ago, over 80 copies have been distributed to over 28 organizations consisting of national laboratories, universities, and private industries.

Greater Sudbury fuel efficient driving handbook

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-12-15

Reducing the amount of fuel that people use for personal driving saves money, improves local air quality, and reduces personal contributions to climate change. This handbook was developed to be used as a tool for a fuel efficient driving pilot program in Greater Sudbury in 2009-2010. Specifically, the purpose of the handbook was to provide greater Sudbury drivers with information on how to drive and maintain their personal vehicles in order to maximize fuel efficiency. The handbook also provides tips for purchasing fuel efficient vehicles. It outlines the benefits of fuel maximization, with particular reference to reducing contributions to climate change; reducing emissions of air pollutants; safe driving; and money savings. Some tips for efficient driving are to avoid aggressive driving; use cruise control; plan trips; and remove excess weight. Tips for efficient winter driving are to avoid idling to warm up the engine; use a block heater; remove snow and ice; use snow tires; and check tire pressure. The importance of car maintenance and tire pressure was emphasized. The handbook also explains how fuel consumption ratings are developed by vehicle manufacturers. refs., figs.

Recommendations for sampling for prevention of hazards in civil defense. On analytics of chemical, biological and radioactive contaminations. Brief instruction for the CBRN (chemical, biological, radioactive, nuclear) sampling

International Nuclear Information System (INIS)

Bachmann, Udo; Biederbick, Walter; Derakshani, Nahid

2010-01-01

The recommendation for sampling for prevention of hazards in civil defense is describing the analytics of chemical, biological and radioactive contaminations and includes detail information on the sampling, protocol preparation and documentation procedures. The volume includes a separate brief instruction for the CBRN (chemical, biological, radioactive, nuclear) sampling.

Loudspeaker handbook

CERN Document Server

Eargle, John

2003-01-01

The second edition of Loudspeaker Handbook follows the same general outlines as the highly successful first edition and has been augmented and updated in many areas of technology. Most notable are the developments in large-scale, programmable line arrays, distributed mode loudspeakers, and ultrasonic-based audio transduction. Additionally, the core chapters on low frequency systems, system concepts, and horn systems have been expanded to include both more analytical material and a richer array of examples. Much of the success of the first edition has been due to its accessibility both to loudspeaker engineers and to lay technicians working in the field - a point of view the author maintains in the present work. A full understanding of the underlying technology requires a fairly rigorous engineering background through the second year of professional study. At the same time, the generous use of graphs, with their intuitive thrust, will be useful to all readers. Loudspeaker Handbook, Second Edition continues to ...

DOE handbook table-top needs analysis

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Purpose of this handbook is to establish guidelines for training personnel in developing training for operation, maintenance, and technical support personnel at DOE nuclear facilities. Information from this handbook can be used to conduct needs analysis as the information and methods apply. Operating contractors are encouraged to use good practices selectively in developing or improving programs to meet the specific needs of their facility.

2012 Aerospace Medical Certification Statistical Handbook

Science.gov (United States)

2013-12-01

2012 Aerospace Medical Certification Statistical Handbook Valerie J. Skaggs Ann I. Norris Civil Aerospace Medical Institute Federal Aviation...Certification Statistical Handbook December 2013 6. Performing Organization Code 7. Author(s) 8. Performing Organization Report No. Skaggs VJ, Norris AI 9...2.57 Hayfever 14,477 2.49 Asthma 12,558 2.16 Other general heart pathology (abnormal ECG, open heart surgery, etc.). Wolff-Parkinson-White syndrome

Handbook of smoke control engineering

CERN Document Server

Klote, John H; Turnbull, Paul G; Kashef, Ahmed; Ferreira, Michael J

2012-01-01

The Handbook of Smoke Control Engineering extends the tradition of the comprehensive treatment of smoke control technology, including fundamental concepts, smoke control systems, and methods of analysis. The handbook provides information needed for the analysis of design fires, including considerations of sprinklers, shielded fires, and transient fuels. It is also extremely useful for practicing engineers, architects, code officials, researchers, and students. Following the success of Principles of Smoke Management in 2002, this new book incorporates the latest research and advances in smoke control practice. New topics in the handbook are: controls, fire and smoke control in transport tunnels, and full-scale fire testing. For those getting started with the computer models CONTAM and CFAST, there are simplified instructions with examples. This is the first smoke control book with climatic data so that users will have easy-to-use weather data specifically for smoke control design for locations in the U.S., Can...

Handbook of relativistic quantum chemistry

Energy Technology Data Exchange (ETDEWEB)

Liu, Wenjian (ed.) [Peking Univ., Beijing (China). Center for Computational Science and Engineering

2017-03-01

This handbook focuses on the foundations of relativistic quantum mechanics and addresses a number of fundamental issues never covered before in a book. For instance: How can many-body theory be combined with quantum electrodynamics? How can quantum electrodynamics be interfaced with relativistic quantum chemistry? What is the most appropriate relativistic many-electron Hamiltonian? How can we achieve relativistic explicit correlation? How can we formulate relativistic properties? - just to name a few. Since relativistic quantum chemistry is an integral component of computational chemistry, this handbook also supplements the ''Handbook of Computational Chemistry''. Generally speaking, it aims to establish the 'big picture' of relativistic molecular quantum mechanics as the union of quantum electrodynamics and relativistic quantum chemistry. Accordingly, it provides an accessible introduction for readers new to the field, presents advanced methodologies for experts, and discusses possible future perspectives, helping readers understand when/how to apply/develop the methodologies.

The Routledge Handbook of Scandinavian Politics

DEFF Research Database (Denmark)

Scandinavian politics today through a series of cutting-edge chapters. It will be a key reference point both for advanced-level students developing knowledge about the subject, as well as researchers producing new material in the area and beyond. It brings geographical scope and depth, with comparative...... chapters contributed by experts across the region. Methodologically and theoretically pluralistic, the handbook is in itself a reflection of the field of political science in Scandinavia and the diversity of the issues covered in the volume. The Routledge Handbook of Scandinavian Politics......The Routledge Handbook of Scandinavian Politics is a comprehensive overview of Scandinavian politics provided by leading experts in the field and covering the polity, the politics and the policy of Scandinavia. Coherently structured with a multi-level thematic approach, it explains and details...

Nuclear criticality safety handbook. Version 2

International Nuclear Information System (INIS)

1999-03-01

The Nuclear Criticality Safety Handbook, Version 2 essentially includes the description of the Supplement Report to the Nuclear Criticality Safety Handbook, released in 1995, into the first version of Nuclear Criticality Safety Handbook, published in 1988. The following two points are new: (1) exemplifying safety margins related to modelled dissolution and extraction processes, (2) describing evaluation methods and alarm system for criticality accidents. Revision is made based on previous studies for the chapter that treats modelling the fuel system: e.g., the fuel grain size that the system can be regarded as homogeneous, non-uniformity effect of fuel solution, and burnup credit. This revision solves the inconsistencies found in the first version between the evaluation of errors found in JACS code system and criticality condition data that were calculated based on the evaluation. (author)

3 GeV Injector Design Handbook

Energy Technology Data Exchange (ETDEWEB)

Wiedemann, H.; /SLAC, SSRL

2009-12-16

This Design Handbook is intended to be the main reference book for the specifications of the 3 GeV SPEAR booster synchrotron project. It is intended to be a consistent description of the project including design criteria, key technical specifications as well as current design approaches. Since a project is not complete till it's complete changes and modifications of early conceptual designs must be expected during the duration of the construction. Therefore, this Design Handbook is issued as a loose leaf binder so that individual sections can be replaced as needed. Each page will be dated to ease identification with respect to latest revisions. At the end of the project this Design Handbook will have become the 'as built' reference book of the injector for operations and maintenance personnel.

77 FR 15609 - Revocation of TSCA Section 4 Testing Requirements for Certain High Production Volume Chemical...

Science.gov (United States)

2012-03-16

... substitute language for your requested changes. iv. Describe any assumptions and provide any technical... boiling point listed for that chemical substance in the ``Handbook of Chemistry and Physics'' (Ref. 21...-0182). 21. CRC Handbook of Chemistry and Physics. 85th Edition. David R. Lide, ed., CRC Press. Boca...

Top five industries resulting in injuries from acute chemical incidents—Hazardous Substance Emergency Events Surveillance, nine states, 1999-2008.

Science.gov (United States)

Anderson, Ayana R; Wu, Jennifer

2015-04-10

Because industries using and/or producing chemicals are located in close proximity to populated areas, U.S. residents are at risk for unintentional chemical exposures. 1999-2008. The Hazardous Substances Emergency Events Surveillance (HSEES) system was operated by the Agency for Toxic Substances and Disease Registry during January 1991-September 2009 to collect data that would enable researchers to describe the public health consequences of chemical releases and to develop activities aimed at reducing the harm from such releases. This report summarizes data for the top five industries resulting in injuries from an acute chemical incident (lasting truck transportation, educational services, chemical manufacturing, utilities, and food manufacturing) accounted for approximately one third of all incidents in which persons were injured as a result of unintentional release of chemicals; the same five industries were responsible for approximately one third of all persons injured as a result of such releases. Acute chemical incidents in these five industries resulted in serious public health implications including the need for evacuations, morbidity, and mortality. PUBLIC HEALTH IMPLICATIONS: Targeting chemical incident prevention and preparedness activities towards these five industries provides an efficient use of resources for reducing chemical exposures. A variety of methods can be used to minimize chemical releases in industries. One example is the Occupational Safety and Health Administration's hierarchy of controls model, which focuses on controlling exposures to occupational hazards. The hierarchy includes elimination, substitution, engineering controls, administrative controls, and use of personal protective equipment.

IAEA-IFRAM joint development of nuclear plant aging management handbooks

International Nuclear Information System (INIS)

Yeji Kim, II Soon Hwang

2015-01-01

As attentions to the beyond design basis accident have increased following Fukushima accident, the importance of aging management for key system, structure and components of nuclear power plant (NPP) also has been emerged as the key factor for safety and reliability of NPPs. The diverse experiences can serve as the foundation for aging management processes that has major trust in the understanding of materials degradation mechanisms. IAEA and IFRAM have collaborated to produce the nuclear plant aging management handbook in order to help entry-level engineers and graduate students understand big pictures. As the number of old NPPs and new-comer countries have increased, sharing experiences and accumulated knowledge from existing nuclear industries has become increasingly important. From this point of view, the handbook has been completed for publication by IAEA which assembled a panel of international experts to integrate the vast body of background knowledge regarding aging mechanism and the extensive know-hows of expertsinto a primer handbook. The next step is to actively utilize the IAEA handbook to produce its web version. In order to reach the ultimate purpose of nuclear safety culture of IAEA, information the handbook should be made easily accessible ana understandable. In this regards, the conversion of IFRAM handbook to web version is being planned. Careful considerations about how to restructure the content and how to reflect opinions from experts and readers are needed. In addition, this handbook can be extended to a training program for maintenance managers, vendors, research organizations and regulators to assist them in their work on aging management in operating NPPs. Through these two aspects, this IFRAM handbook on aging management of NPPs will support of NPP staff both new-comer and established countries. This paper introduces the purpose, approach, structure, content of already completed IAEA handbook and the status and plan for IFRAM Web-handbook

Handbook of thin film technology

CERN Document Server

Frey, Hartmut

2015-01-01

“Handbook of Thin Film Technology” covers all aspects of coatings preparation, characterization and applications. Different deposition techniques based on vacuum and plasma processes are presented. Methods of surface and thin film analysis including coating thickness, structural, optical, electrical, mechanical and magnetic properties of films are detailed described. The several applications of thin coatings and a special chapter focusing on nanoparticle-based films can be found in this handbook. A complete reference for students and professionals interested in the science and technology of thin films.

Laboratory safety handbook

Science.gov (United States)

Skinner, E.L.; Watterson, C.A.; Chemerys, J.C.

1983-01-01

Safety, defined as 'freedom from danger, risk, or injury,' is difficult to achieve in a laboratory environment. Inherent dangers, associated with water analysis and research laboratories where hazardous samples, materials, and equipment are used, must be minimized to protect workers, buildings, and equipment. Managers, supervisors, analysts, and laboratory support personnel each have specific responsibilities to reduce hazards by maintaining a safe work environment. General rules of conduct and safety practices that involve personal protection, laboratory practices, chemical handling, compressed gases handling, use of equipment, and overall security must be practiced by everyone at all levels. Routine and extensive inspections of all laboratories must be made regularly by qualified people. Personnel should be trained thoroughly and repetitively. Special hazards that may involve exposure to carcinogens, cryogenics, or radiation must be given special attention, and specific rules and operational procedures must be established to deal with them. Safety data, reference materials, and texts must be kept available if prudent safety is to be practiced and accidents prevented or minimized.

Comparison of the rationale used in setting occupational exposure standards for ionizing radiation and hazardous chemical substances

International Nuclear Information System (INIS)

Halton, D.M.

1986-12-01

Ten chemicals which create significant occupational hazard are reviewed. They are toluene diisocyanate, hydrogen fluoride, n-hexane, carbon disulphide, cadmium, inorganic mercury, cobalt, nitroglycerol, silica and vinyl chloride. Each is discussed under the headings of physiological intake and elimination in humans, characteristics of acute and chronic toxicity, sites of occupational exposure and rationale for limits of such exposure. Since radioactive substances yield ionizing radiation as the common hazard the treatment of the current permissible levels of exposure is somewhat simpler. Having set out industrial standards for exposure to hazardous substances and radionuclides, a detailed comparison is made. Exposure limits to ioninzing radiation are sufficiently low to remove the appearance of directly related injury. It is expected however that low level exposure may have a stochastic effect, that is, there is the possibility of a slightly increased incidence of neoplasms in a large exposed population, but numbers will be too small to be able to attribute any particular case to the exposure. TLVs on the other hand, depending on the particular chemical, may be high enough in the workplace to permit some directly related signs or symptoms in the exposed individual. 244 refs

Handbook of nanomedicine

CERN Document Server

Jain, Kewal K

2012-01-01

In its updated and reorganized second edition, this handbook captures the latest advances in nanomedicine applied to researching the pathomechanism of disease, refining molecular diagnostics, and aiding in the discovery, development, and delivery of drugs.

Nutrition for Athletes. A Handbook for Coaches.

Science.gov (United States)

American Association for Health, Physical Education, and Recreation, Washington, DC.

This handbook contains nutritional information for athletic coaches and others who provide this information and guidance to high school and college students. The purposes of the handbook are to review briefly the content of a sound basic diet and to analyze theories and practices that would relate to nutrition and athletic performance. The…

Handbook of Qualitative Research in Communication Disorders

Science.gov (United States)

Ball, Martin J., Ed.; Müller, Nicole, Ed.; Nelson, Ryan L., Ed.

2013-01-01

This volume provides a comprehensive and in-depth handbook of qualitative research in the field of communication disorders. It introduces and illustrates the wide range of qualitative paradigms that have been used in recent years to investigate various aspects of communication disorders. The first part of the Handbook introduces in some detail the…

APS beamline standard components handbook, Version 1.3

International Nuclear Information System (INIS)

Hahn, U.; Shu, D.; Kuzay, T.M.

1993-02-01

This Handbook in its current version (1.3) contains descriptions, specifications, and preliminary engineering design drawings for many of the standard components. The design status and schedules have been provided wherever possible. In the near future, the APS plans to update engineering drawings of identified standard beamline components and complete the Handbook. The completed version of this Handbook will become available to both the CATs and potential vendors. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction

A Handbook of Essential Mathematical Formulae

CERN Document Server

Davies, Alan

2005-01-01

Intended for students of mathematics as well as of engineering, physical science, economics, business studies, and computer science, this handbook contains vital information and formulas for algebra, geometry, calculus, numerical methods, and statistics. Comprehensive tables of standard derivatives and integrals, together with the tables of Laplace, Fourier, and Z transforms are included. A spiral binding that allows the handbook to lay flat for easy reference enhances the user-friendly design.

Handbook of Research on Environmental Taxation

OpenAIRE

2012-01-01

The Handbook of Research on Environmental Taxation captures the state of the art of research on environmental taxation. Written by 36 specialists in environmental taxation from 16 countries, it takes an interdisciplinary and international approach, focusing on issues that are universal to using taxation to achieve environmental goals.The Handbook explores the conceptual foundations of environmental taxation, essential elements for designing environmental tax measures, factors that influence t...

Aerosol Chemical Speciation Monitor (ACSM) Instrument Handbook

Energy Technology Data Exchange (ETDEWEB)

Watson, Thomas B. [Brookhaven National Lab. (BNL), Upton, NY (United States)

2017-08-15

The Aerodyne Aerosol Chemical Speciation Monitor (ACSM) measures particle mass loading and chemical composition in real time for non-refractory sub-micron aerosol particles. The ACSM is designed for long-term unattended deployment and routine monitoring applications.

Genetic k-means clustering approach for mapping human vulnerability to chemical hazards in the industrialized city: a case study of Shanghai, China.

Science.gov (United States)

Shi, Weifang; Zeng, Weihua

2013-06-20

Reducing human vulnerability to chemical hazards in the industrialized city is a matter of great urgency. Vulnerability mapping is an alternative approach for providing vulnerability-reducing interventions in a region. This study presents a method for mapping human vulnerability to chemical hazards by using clustering analysis for effective vulnerability reduction. Taking the city of Shanghai as the study area, we measure human exposure to chemical hazards by using the proximity model with additionally considering the toxicity of hazardous substances, and capture the sensitivity and coping capacity with corresponding indicators. We perform an improved k-means clustering approach on the basis of genetic algorithm by using a 500 m × 500 m geographical grid as basic spatial unit. The sum of squared errors and silhouette coefficient are combined to measure the quality of clustering and to determine the optimal clustering number. Clustering result reveals a set of six typical human vulnerability patterns that show distinct vulnerability dimension combinations. The vulnerability mapping of the study area reflects cluster-specific vulnerability characteristics and their spatial distribution. Finally, we suggest specific points that can provide new insights in rationally allocating the limited funds for the vulnerability reduction of each cluster.

Genetic k-Means Clustering Approach for Mapping Human Vulnerability to Chemical Hazards in the Industrialized City: A Case Study of Shanghai, China

Directory of Open Access Journals (Sweden)

Weihua Zeng

2013-06-01

Full Text Available Reducing human vulnerability to chemical hazards in the industrialized city is a matter of great urgency. Vulnerability mapping is an alternative approach for providing vulnerability-reducing interventions in a region. This study presents a method for mapping human vulnerability to chemical hazards by using clustering analysis for effective vulnerability reduction. Taking the city of Shanghai as the study area, we measure human exposure to chemical hazards by using the proximity model with additionally considering the toxicity of hazardous substances, and capture the sensitivity and coping capacity with corresponding indicators. We perform an improved k-means clustering approach on the basis of genetic algorithm by using a 500 m × 500 m geographical grid as basic spatial unit. The sum of squared errors and silhouette coefficient are combined to measure the quality of clustering and to determine the optimal clustering number. Clustering result reveals a set of six typical human vulnerability patterns that show distinct vulnerability dimension combinations. The vulnerability mapping of the study area reflects cluster-specific vulnerability characteristics and their spatial distribution. Finally, we suggest specific points that can provide new insights in rationally allocating the limited funds for the vulnerability reduction of each cluster.

FAA statistical handbook of aviation, calendar year 1988

Science.gov (United States)

1988-08-15

The FAA Statistical Handbook of Aviation is published annually by the Federal Aviation Administration (FAA). The handbook is provided here in MS Excel. format as downloadable files and as text tables that can be viewed in PDF format. The prime purpos...

The Family Support Group (FSG) Leaders’ Handbook

Science.gov (United States)

2000-04-01

family guide. Fort Hood, TX: Author. Granovsky , N. (1998). Family Support Group leader basic handbook (Operation READY). Alexandria, VA: U. S...Readiness and Financial Planning " (22.3 minutes). Granovsky , N. (1998). Family Support Group Leader Basic Handbook (Operation READY). Alexandria

Chemical health risk assessment for hazardous and mixed waste management units at Lawrence Livermore National Laboratory

International Nuclear Information System (INIS)

1992-09-01

The waste characterization for each treatment unit or process is based on treatment records from LLNL's computerized Hazardous Waste Management Inventory System (HWMIS). In 1990, these data were compiled into a single database comprising both hazardous waste and mixed waste data. Even though these data originate from the same source used in the previous HRA, the database was modified to set quantities and concentrations to a consistent set of units. This allowed an analysis of waste types by Hazardous Waste Management unit that was more accurate and did not rely upon many of the conservative assumptions used in the Phase II HRA waste characterization. Finally, the current waste characterizations are considered more representative of potential long-term wastes because they were developed by combining all wastes that could be treated in each unit, as opposed to the wastes treated only during 1988 to 1989. This final step more appropriately accounts for the variability in waste types likely to be seen by the Hazardous Waste Management Division. The quantities of each waste listed in the characterization tables represent the sum of all chemical quantities belonging to hazardous and mixed waste types potentially handled by each area

Fuel Handbook[Wood and other renewable fuels

Energy Technology Data Exchange (ETDEWEB)

Stroemberg, Birgitta [TPS Termiska Processer AB, Nykoeping (SE)] (ed.)

2006-03-15

This handbook on renewable fuels is intended for power and heat producers in Sweden. This fuel handbook provides, from a plant owner's perspective, a method to evaluate different fuels on the market. The fuel handbook concerns renewable fuels (but does not include household waste) that are available on the Swedish market today or fuels that have potential to be available within the next ten years. The handbook covers 26 different fuels. Analysis data, special properties, operating experiences and literature references are outlined for each fuel. [Special properties, operating experiences and literature references are not included in this English version] The handbook also contains: A proposed methodology for introduction of new fuels. A recommendation of analyses and tests to perform in order to reduce the risk of problems is presented. [The recommendation of analyses and tests is not included in the English version] A summary of relevant laws and taxes for energy production, with references to relevant documentation. [Only laws and taxes regarding EU are included] Theory and background to evaluate a fuel with respect to combustion, ash and corrosion properties and methods that can be used for such evaluations. Summary of standards, databases and handbooks on biomass fuels and other solid fuels, and links to web sites where further information about the fuels can be found. The appendices includes: A methodology for trial firing of fuels. Calculations procedures for, amongst others, heating value, flue gas composition, key number and free fall velocity [Free fall velocity is not included in the English version]. In addition, conversion routines between different units for a number of different applications are provided. Fuel analyses are presented in the appendix. (The report is a translation of parts of the report VARMEFORSK--911 published in 2005)

FCRD Transmutation Fuels Handbook 2015

Energy Technology Data Exchange (ETDEWEB)

Janney, Dawn Elizabeth [Idaho National Lab. (INL), Idaho Falls, ID (United States); Papesch, Cynthia Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-09-01

Transmutation of minor actinides such as Np, Am, and Cm in spent nuclear fuel is of international interest because of its potential for reducing the long-term health and safety hazards caused by the radioactivity of the spent fuel. One important approach to transmutation (currently being pursued by the DOE Fuel Cycle Research & Development Advanced Fuels Campaign) involves incorporating the minor actinides into U-Pu-Zr alloys, which can be used as fuel in fast reactors. It is, therefore, important to understand the properties of U-Pu-Zr alloys, both with and without minor actinide additions. In addition to requiring extensive safety precautions, alloys containing U and Pu are difficult to study for numerous reasons, including their complex phase transformations, characteristically sluggish phase-transformation kinetics, tendency to produce experimental results that vary depending on the histories of individual samples, and sensitivity to contaminants such as oxygen in concentrations below a hundred parts per million. Many of the experimental measurements were made before 1980, and the level of documentation for experimental methods and results varies widely. It is, therefore, not surprising that little is known with certainty about U-Pu-Zr alloys, and that general acceptance of results sometimes indicates that there is only a single measurement for a particular property. This handbook summarizes currently available information about U, Pu, Zr, and alloys of two or three of these elements. It contains information about phase diagrams and related information (including phases and phase transformations); heat capacity, entropy, and enthalpy; thermal expansion; and thermal conductivity and diffusivity. In addition to presenting information about materials properties, it attempts to provide information about how well the property is known and how much variation exists between measurements. Although the handbook includes some references to publications about modeling

Regulatory analysis technical evaluation handbook. Final report

International Nuclear Information System (INIS)

1997-01-01

The purpose of this Handbook is to provide guidance to the regulatory analyst to promote preparation of quality regulatory analysis documents and to implement the policies of the Regulatory Analysis Guidelines of the US Nuclear Regulatory Commission (NUREG/BR-0058 Rev. 2). This Handbook expands upon policy concepts included in the NRC Guidelines and translates the six steps in preparing regulatory analyses into implementable methodologies for the analyst. It provides standardized methods of preparation and presentation of regulatory analyses, with the inclusion of input that will satisfy all backfit requirements and requirements of NRC's Committee to Review Generic Requirements. Information on the objectives of the safety goal evaluation process and potential data sources for preparing a safety goal evaluation is also included. Consistent application of the methods provided here will result in more directly comparable analyses, thus aiding decision-makers in evaluating and comparing various regulatory actions. The handbook is being issued in loose-leaf format to facilitate revisions. NRC intends to periodically revise the handbook as new and improved guidance, data, and methods become available

Handbook of mechanical engineering terms

CERN Document Server

Ramalingam, KK

2009-01-01

About the Book: The Handbook of Mechanical Engineering terms contains short, precise definitions of about four thousand terms. These terms have been collected from different sources, edited and grouped under twenty six parts and given alphabetically under each part for easy reference. The book will be a source of guidance and help to the students, staff and practising engineers in understanding and updating the subject matter. Contents: The Handbook of Mechanical Engineering terms contains short, precise definitions of about four thousand terms. These terms have been collected from differ

NASA Risk-Informed Decision Making Handbook

Science.gov (United States)

Dezfuli, Homayoon; Stamatelatos, Michael; Maggio, Gaspare; Everett, Christopher; Youngblood, Robert; Rutledge, Peter; Benjamin, Allan; Williams, Rodney; Smith, Curtis; Guarro, Sergio

2010-01-01

This handbook provides guidance for conducting risk-informed decision making in the context of NASA risk management (RM), with a focus on the types of direction-setting key decisions that are characteristic of the NASA program and project life cycles, and which produce derived requirements in accordance with existing systems engineering practices that flow down through the NASA organizational hierarchy. The guidance in this handbook is not meant to be prescriptive. Instead, it is meant to be general enough, and contain a sufficient diversity of examples, to enable the reader to adapt the methods as needed to the particular decision problems that he or she faces. The handbook highlights major issues to consider when making decisions in the presence of potentially significant uncertainty, so that the user is better able to recognize and avoid pitfalls that might otherwise be experienced.

Stop the Bullying: A Handbook for Schools.

Science.gov (United States)

Rigby, Ken

Noting that bullying in school is a growing concern in Australian communities, this handbook draws upon a 10-year study of bullying in Australian schools and is designed to help educators find out what is happening in their school and develop sound anti-bullying policies. The handbook also provides guidance in working effectively with students to…

CTBT technical issues handbook

International Nuclear Information System (INIS)

Zucca, J.J.

1994-05-01

The purpose of this handbook is to give the nonspecialist in nuclear explosion physics and nuclear test monitoring an introduction to the topic as it pertains to a Comprehensive Test Ban Treaty (CTBT). The authors have tried to make the handbook visually oriented, with figures paired to short discussions. As such, the handbook may be read straight through or in sections. The handbook covers four main areas and ends with a glossary, which includes both scientific terms and acronyms likely to be encountered during CTBT negotiations. The following topics are covered: (1) Physics of nuclear explosion experiments. This is a description of basic nuclear physics and elementary nuclear weapon design. Also discussed are testing practices. (2) Other nuclear experiments. This section discusses experiments that produce small amounts of nuclear energy but differ from explosion experiments discussed in the first chapter. This includes the type of activities, such as laser fusion, that would continue after a CTBT is in force. (3) Monitoring tests in various environments. This section describes the different physical environments in which a test could be conducted (underground, in the atmosphere, in space, underwater, and in the laboratory); the sources of non-nuclear events (such as earthquakes and mining operations); and the opportunities for evasion. (4) On-site inspections. A CTBT is likely to include these inspections as an element of the verification provisions, in order to resolve the nature of ambiguous events. This chapter describes some technical considerations and technologies that are likely to be useful. (5) Selecting verification measures. This chapter discusses the uncertain nature of the evidence from monitoring systems and how compliance judgments could be made, taking the uncertainties into account. It also discusses how to allocate monitoring resources, given the likelihood of testing by various countries in various environments

Electrical transformer handbook

Energy Technology Data Exchange (ETDEWEB)

Hurst, R.W.; Horne, D. (eds.)

2005-07-01

This handbook is a valuable user guide intended for electrical engineering and maintenance personnel, electrical contractors and electrical engineering students. It provides current information on techniques and technologies that can help extend the life of transformers. It discusses transformer testing, monitoring, design, commissioning, retrofitting and other elements involved in keeping electrical transformers in safe and efficient operation. It demonstrates how a power transformer can be put to use and common problems faced by owners. In addition to covering control techniques, testing and maintenance procedures, this handbook covers the power transformer; control electrical power transformer; electrical power transformer; electrical theory transformer; used electrical transformer; down electrical step transformer; electrical manufacturer transformer; electrical picture transformer; electrical transformer work; electrical surplus transformer; current transformer; step down transformer; voltage transformer; step up transformer; isolation transformer; low voltage transformer; toroidal transformer; high voltage transformer; and control power transformer. The handbook includes articles from leading experts on overcurrent protection of transformers; ventilated dry-type transformers; metered load factors for low-voltage, and dry-type transformers in buildings. The maintenance of both dry-type or oil-filled transformers was discussed with reference to sealing, gaskets, oils, moisture and testing. The adoption of dynamic load practices was also discussed along with the reclamation or recycling of used lube oil, transformer dielectric fluids and aged solid insulation. A buyer's guide and directory of transformer manufacturers and suppliers was also included. refs., tabs., figs.

Nanostructure Engineered Chemical Sensors for Hazardous Gas and Vapor Detection

Science.gov (United States)

Li, Jing; Lu, Yijiang

2005-01-01

A nanosensor technology has been developed using nanostructures, such as single walled carbon nanotubes (SWNTs) and metal oxides nanowires or nanobelts, on a pair of interdigitated electrodes (IDE) processed with a silicon based microfabrication and micromachining technique. The IDE fingers were fabricated using thin film metallization techniques. Both in-situ growth of nanostructure materials and casting of the nanostructure dispersions were used to make chemical sensing devices. These sensors have been exposed to hazardous gases and vapors, such as acetone, benzene, chlorine, and ammonia in the concentration range of ppm to ppb at room temperature. The electronic molecular sensing in our sensor platform can be understood by electron modulation between the nanostructure engineered device and gas molecules. As a result of the electron modulation, the conductance of nanodevice will change. Due to the large surface area, low surface energy barrier and high thermal and mechanical stability, nanostructured chemical sensors potentially can offer higher sensitivity, lower power consumption and better robustness than the state-of-the-art systems, which make them more attractive for defense and space applications. Combined with MEMS technology, light weight and compact size sensors can be made in wafer scale with low cost.

SRS: Site ranking system for hazardous chemical and radioactive waste

International Nuclear Information System (INIS)

Rechard, R.P.; Chu, M.S.Y.; Brown, S.L.

1988-05-01

This report describes the rationale and presents instructions for a site ranking system (SRS). SRS ranks hazardous chemical and radioactive waste sites by scoring important and readily available factors that influence risk to human health. Using SRS, sites can be ranked for purposes of detailed site investigations. SRS evaluates the relative risk as a combination of potentially exposed population, chemical toxicity, and potential exposure of release from a waste site; hence, SRS uses the same concepts found in a detailed assessment of health risk. Basing SRS on the concepts of risk assessment tends to reduce the distortion of results found in other ranking schemes. More importantly, a clear logic helps ensure the successful application of the ranking procedure and increases its versatility when modifications are necessary for unique situations. Although one can rank sites using a detailed risk assessment, it is potentially costly because of data and resources required. SRS is an efficient approach to provide an order-of-magnitude ranking, requiring only readily available data (often only descriptive) and hand calculations. Worksheets are included to make the system easier to understand and use. 88 refs., 19 figs., 58 tabs

Nuclear material accounting handbook

International Nuclear Information System (INIS)

2008-01-01

The handbook documents existing best practices and methods used to account for nuclear material and to prepare the required nuclear material accounting reports for submission to the IAEA. It provides a description of the processes and steps necessary for the establishment, implementation and maintenance of nuclear material accounting and control at the material balance area, facility and State levels, and defines the relevant terms. This handbook serves the needs of State personnel at various levels, including State authorities, facility operators and participants in training programmes. It can assist in developing and maintaining accounting systems which will support a State's ability to account for its nuclear material such that the IAEA can verify State declarations, and at the same time support the State's ability to ensure its nuclear security. In addition, the handbook is useful for IAEA staff, who is closely involved with nuclear material accounting. The handbook includes the steps and procedures a State needs to set up and maintain to provide assurance that it can account for its nuclear material and submit the prescribed nuclear material accounting reports defined in Section 1 and described in Sections 3 and 4 in terms of the relevant agreement(s), thereby enabling the IAEA to discharge its verification function as defined in Section 1 and described in Sections 3 and 4. The contents of the handbook are based on the model safeguards agreement and, where applicable, there will also be reference to the model additional protocol. As a State using The handbook consists of five sections. In Section 1, definitions or descriptions of terms used are provided in relation to where the IAEA applies safeguards or, for that matter, accounting for and control of nuclear material in a State. The IAEA's approach in applying safeguards in a State is also defined and briefly described, with special emphasis on verification. In Section 2, the obligations of the State

Sodium technology handbook

International Nuclear Information System (INIS)

2005-09-01

This document was published as a textbook for the education and training of personnel working for operations and maintenances of sodium facilities including FBR plants and those engaged in R and D activities related to sodium technology. This handbook covers the following technical areas. Properties of sodium. Compatibilities of sodium with materials. Thermalhydraulics and structural integrity. Sodium systems and components. Sodium instrumentations. Sodium handling technology. Sodium related accident evaluation and countermeasures for FBRs. Operation, maintenance and repair technology of sodium facilities. Safety measures related to sodium. Laws, regulations and internal rules related to sodium. The plannings and discussions of the handbook were made in the Sodium Technology Education Committee organized in O-arai Engineering Center consisting of the representatives of the related departments including Tsuruga headquarters. Experts in various departments participated in writing individual technical subjects. (author)

Handbook for designing roadways for the aging population.

Science.gov (United States)

2014-06-01

The original Older Driver Highway Design Handbook was published by FHWA in 1998 (FHWA-RD-97-135). The : 2nd edition, titled Highway Design Handbook for Older Drivers and Pedestrians (FHWA-RD-01-103) was published in : 2001. This 3rd edition, under a ...

Assessment of local wood species used for the manufacture of cookware and the perception of chemical benefits and chemical hazards associated with their use in Kumasi, Ghana

Directory of Open Access Journals (Sweden)

Mensah John Kenneth

2012-12-01

Full Text Available Abstract Background Historical proven wood species have no reported adverse health effect associated with its past use. Different historical proven species have traditionally been used to manufacture different wooden food contact items. This study uses survey questionnaires to assess suppliers’, manufacturers’, retailers’ and consumers’ (end-users’ preferences for specific wood species, to examine the considerations that inform these preferences and to investigate the extent of awareness of the chemical benefits and chemical hazards associated with wooden food contact material use. Methods Through the combined use of a cross sectional approach and a case study design, 25 suppliers, 25 manufacturers, 25 retailers and 125 consumers (end-users of wooden food contact materials in four suburbs in Kumasi Metropolitan Area (Anloga junction, Ahinsan Bus Stop, Ahwia-Pankrono and Race Course and Ashanti Akyim Agogo in the Ashanti Akyim North District of the Ashanti Region were administered with closed ended questionnaires. The questionnaires were prepared in English, but local language, Twi, was used to translate and communicate the content of the questionnaire where necessary. Results Suppliers’, manufacturers’ and retailers’ preferences for specific wood species for most wooden cookware differed from that of consumers (end-users. But all respondent groups failed to indicate any awareness of chemical benefits or chemical hazards associated with either the choice of specific wood species for specific wooden cookware or with the general use of wooden food contact materials. The lack of appreciation of chemical benefits or hazards associated with active principles of wooden cookware led to heavy reliance of consumers (end-users on the wood density, price, attractive grain pattern and colour or on the judgement of retailers in their choice of specific species for a wooden cookware. Conclusion This study contributes some practical suggestions

Referencing handbook: OSCOLA

OpenAIRE

Williams, Helen

2016-01-01

University of Lincoln approved guide to OSCOLA referencing. Providing guidelines on how to reference UK, EU and International primary sources of law and secondary sources. The handbook provides examples and annotated diagrams to help you reference sources in the OSCOLA style.

Handbook of Markov chain Monte Carlo

CERN Document Server

Brooks, Steve

2011-01-01

""Handbook of Markov Chain Monte Carlo"" brings together the major advances that have occurred in recent years while incorporating enough introductory material for new users of MCMC. Along with thorough coverage of the theoretical foundations and algorithmic and computational methodology, this comprehensive handbook includes substantial realistic case studies from a variety of disciplines. These case studies demonstrate the application of MCMC methods and serve as a series of templates for the construction, implementation, and choice of MCMC methodology.

Nuclear Criticality Safety Handbook, Version 2. English translation

International Nuclear Information System (INIS)

2001-08-01

The Nuclear Criticality Safety Handbook, Version 2 essentially includes the description of the Supplement Report to the Nuclear Criticality Safety Handbook, released in 1995, into the first version of the Nuclear Criticality Safety Handbook, published in 1988. The following two points are new: (1) exemplifying safety margins related to modeled dissolution and extraction processes, (2) describing evaluation methods and alarm system for criticality accidents. Revision has been made based on previous studies for the chapter that treats modeling the fuel system: e.g., the fuel grain size that the system can be regarded as homogeneous, non-uniformity effect of fuel solution, an burnup credit. This revision has solved the inconsistencies found in the first version between the evaluation of errors found in JACS code system and the criticality condition data that were calculated based on the evaluation. This report is an English translation of the Nuclear Criticality Safety Handbook, Version 2, originally published in Japanese as JAERI 1340 in 1999. (author)

Third international handbook of mathematics education

CERN Document Server

Bishop, Alan; Keitel, Christine; Kilpatrick, Jeremy; Leung, Frederick

2013-01-01

This entirely new Third International Handbook of Mathematics Education comprises 31 chapters which have been written by a total of 84 different authors representing 26 nations, each a recognized expert in the field.   Comprised of four sections: Social, Political and Cultural Dimensions in Mathematics Education; Mathematics Education as a Field of Study; Technology in the Mathematics Curriculum; and International Perspectives on Mathematics Education, this Third Handbook offers essential reading for all persons interested in the future of mathematics education. The authors present challenging international perspectives on the history of mathematics education, current issues, and future directions.   What makes this Handbook unique is its structure. Each section covers past, present and future aspects of mathematics education.   The first chapter in each section identifies and analyzes historical antecedents The “middle” chapters draw attention to present-day key issues and themes The final chapter in ...

DOE/EPRI Electricity Storage Handbook in Collaboration with NRECA

Energy Technology Data Exchange (ETDEWEB)

Akhil, Abbas A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Energy Storage Technology and Systems; Huff, Georgianne [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Energy Storage Technology and Systems; Currier, Aileen B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Energy Storage Technology and Systems; Hernandez, Jacquelynne [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Energy Storage Technology and Systems; Bender, Donald Arthur [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Kaun, Benjamin C. [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Rastler, Dan M. [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Chen, Stella Bingqing [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Cotter, Andrew L. [National Rural Electric Cooperative Association, Arlington, VA (United States); Bradshaw, Dale T. [National Rural Electric Cooperative Association, Arlington, VA (United States); Gauntlett, William D. [AECOM Technical Services, Inc., Albuquerque, NM (United States); Eyer, James [Clean Energy States Alliance, Montpelier, VT (United States); Olinsky-Paul, Todd [Clean Energy States Alliance, Montpelier, VT (United States); Ellison, Michelle [E& I Consulting, Oakland, CA (United States); Schoenung, Susan [Longitude 122 West, Inc., Menlo Park, CA (United States)

2016-09-01

The Electricity Storage Handbook (Handbook) is a how-to guide for utility and rural cooperative engineers, planners, and decision makers to plan and implement energy storage projects. The Handbook also serves as an information resource for investors and venture capitalists, providing the latest developments in technologies and tools to guide their evaluations of energy storage opportunities. It includes a comprehensive database of the cost of current storage systems in a wide variety of electric utility and customer services, along with interconnection schematics. A list of significant past and present energy storage projects is provided for a practical perspective. This Handbook, jointly sponsored by the U.S. Department of Energy and the Electric Power Research Institute in collaboration with the National Rural Electric Cooperative Association, is published in electronic form at www.sandia.gov/ess.

Corrosion and chemical resistant masonry materials handbook

National Research Council Canada - National Science Library

Sheppard, Walter Lee

1986-01-01

... and other equipment. But few other than chemists and chemical engineers identify "corrosion" as chemical degradation or destruction of a material, and therefore, something that can happen to nonmetals (concrete, plastics, brick, timber, etc.) as well as to nletals. The National Association of Corrosion Engineers so defined "corrosion" over thirty years ago but this f...

The Global Food System as a Transport Pathway for Hazardous Chemicals: The Missing Link between Emissions and Exposure

OpenAIRE

Ng, Carla A.; von Goetz, Natalie

2016-01-01

Background: Food is a major pathway for human exposure to hazardous chemicals. The modern food system is becoming increasingly complex and globalized, but models for food-borne exposure typically assume locally derived diets or use concentrations directly measured in foods without accounting for food origin. Such approaches may not reflect actual chemical intakes because concentrations depend on food origin, and representative analysis is seldom available. Processing, packaging, storage, and ...

Transit manager's handbook.

Science.gov (United States)

2011-09-01

This handbook provides an overview of public transit in Iowa and how to do business with the Iowa Department of Transportation (Iowa DOT) Office of Public Transit (OPT). It is intended to be a tool to assist transit managers navigate through the many...

Quality assurance handbook for measurement laboratories

International Nuclear Information System (INIS)

Delvin, W.L.

1984-10-01

This handbook provides guidance in the application of quality assurance to measurement activities. It is intended to help those persons making measurements in applying quality assurance to their work activities by showing how laboratory practices and quality assurance requirements are integrated to provide control within those activities. The use of the guidance found in this handbook should help provide consistency in the interpretation of quality assurance requirements across all types of measurement laboratories. This handbook also can assist quality assurance personnel in understanding the relationships between laboratory practices and quality assurance requirements. The handbook is composed of three chapters and several appendices. Basic guidance is provided by the three chapters. In Chapter 1, the role of quality assurance in obtaining quality data and the importance of such data are discussed. Chapter 2 presents the elements of laboratory quality assurance in terms of practices that can be used in controlling work activities to assure the acquisition of quality data. Chapter 3 discusses the implementation of laboratory quality assurance. The appendices provide supplemental information to give the users a better understanding of the following: what is quality assurance; why quality assurance is required; where quality assurance requirements come from; how those requirements are interpreted for application to laboratory operations; how the elements of laboratory quality assurance relate to various laboratory activities; and how a quality assurance program can be developed

An OSHA based approach to safety analysis for nonradiological hazardous materials

International Nuclear Information System (INIS)

Yurconic, M.

1992-08-01

The PNL method for chemical hazard classification defines major hazards by means of a list of hazardous substances (or chemical groups) with associated trigger quantities. In addition, the functional characteristics of the facility being classified is also be factored into the classification. In this way, installations defined as major hazard will only be those which have the potential for causing very serious incidents both on and off site. Because of the diversity of operations involving chemicals, it may not be possible to restrict major hazard facilities to certain types of operations. However, this hazard classification method recognizes that in the industrial sector major hazards are most commonly associated with activities involving very large quantities of chemicals and inherently energetic processes. These include operations like petrochemical plants, chemical production, LPG storage, explosives manufacturing, and facilities which use chlorine, ammonia, or other highly toxic gases in bulk quantities. The basis for this methodology is derived from concepts used by OSHA in its proposed chemical process safety standard, the Dow Fire and Explosion Index Hazard Classification Guide, and the International Labor Office's program on chemical safety. For the purpose of identifying major hazard facilities, this method uses two sorting criteria, (1) facility function and processes and (2) quantity of substances to identify facilities requiringclassification. Then, a measure of chemical energy potential (material factor) is used to identify high hazard class facilities

[Records of growth and development data in the child health handbook].

Science.gov (United States)

Abud, Simone Mourão; Gaíva, Maria Aparecida Munhoz

2015-06-01

The aim was to analyse the input of growth and development data in the Child Health Handbook. This is a cross-sectional study conducted in Cuiabá, Brazil, on August 13, 2011, with the application of a questionnaire and direct observation of 950 handbooks. We included children under one year of age who resided in Cuiabá, accompanied by their mothers or guardians who were in possession of the handbook. Data were analyzed by calculating the prevalence ratio (PR) and Chi-Square test, with a significance level set at 5%. The project was approved by the Ethics Committee under Opinion No. 882/2010. Of the analyzed handbooks, 95.4% of the development data and 79.6% of the data in the growth charts were incomplete or missing. The low rate of growth and development data input in the handbooks reveals the need to create awareness among the population, health care professionals and managers on the importance of handbooks, and the need to invest in training and the empowerment of professionals in relation to its proper use.

Hazardous substances in Europe's fresh and marine waters

DEFF Research Database (Denmark)

Collins, Robert; Brack, Werner; Lützhøft, Hans-Christian Holten

Chemicals are an essential part of our daily lives. They are used to produce consumer goods, to protect or restore our health and to boost food production, to name but a few examples — and they are also involved in a growing range of environmental technologies. Europe's chemical and associated...... on their pattern of use and the potential for exposure. Certain types of naturally occurring chemicals, such as metals, can also be hazardous. Emissions of hazardous substances to the environment can occur at every stage of their life cycle, from production, processing, manufacturing and use in downstream...... regarding chemical contamination arising from the exploitation of shale gas has grown recently. Hazardous substances in water affect aquatic life… Hazardous substances are emitted to water bodies both directly and indirectly through a range of diffuse and point source pathways. The presence of hazardous...

Decision support handbook for recovery of contaminated inhabited areas

Energy Technology Data Exchange (ETDEWEB)

Andersson, K.G. (Technical Univ. of Denmark, Risoe National Lab. for Sustainable Energy, Roskilde (Denmark)); Ammann, M. (STUK, Helsinki (Finland)); Backe, S. (IFE, Kjeller (Norway)); Rosen, K. (Swedish Univ. of Agricultural Sciences, Uppsala (Sweden))

2008-07-15

The handbook is aimed at providing Nordic decision-makers and their expert advisors with required background material for the development of an optimised, operational preparedness for situations where airborne radioactive matter has contaminated a Nordic inhabited area. The focus is on the mitigation of long-term problems. It should be stressed that the information given in the handbook is comprehensive, and many details require careful consideration well in time before implementation of countermeasures in a specific area. Training sessions are therefore recommended. The handbook describes the current relevant Nordic preparedness (dissemination routes) in detail, and suggests methods for measurement of contamination and prognoses of resultant doses, and data for evaluation of countermeasures and associated waste management options. A number of non-technical aspects of contamination in inhabited areas, and of countermeasures for its mitigation, are discussed, and a series of recommendations on the application of all the handbook data in a holistic countermeasure strategy are given. A part of the handbook development has been a dialogue with end-user representatives in each of the Nordic countries, to focus the work of the specific needs of the users. (au)

Decision support handbook for recovery of contaminated inhabited areas

International Nuclear Information System (INIS)

Andersson, K.G.; Ammann, M.; Backe, S.; Rosen, K.

2008-07-01

The handbook is aimed at providing Nordic decision-makers and their expert advisors with required background material for the development of an optimised, operational preparedness for situations where airborne radioactive matter has contaminated a Nordic inhabited area. The focus is on the mitigation of long-term problems. It should be stressed that the information given in the handbook is comprehensive, and many details require careful consideration well in time before implementation of countermeasures in a specific area. Training sessions are therefore recommended. The handbook describes the current relevant Nordic preparedness (dissemination routes) in detail, and suggests methods for measurement of contamination and prognoses of resultant doses, and data for evaluation of countermeasures and associated waste management options. A number of non-technical aspects of contamination in inhabited areas, and of countermeasures for its mitigation, are discussed, and a series of recommendations on the application of all the handbook data in a holistic countermeasure strategy are given. A part of the handbook development has been a dialogue with end-user representatives in each of the Nordic countries, to focus the work of the specific needs of the users. (au)

The international handbook of space technology

CERN Document Server

Badescu, Viorel

2014-01-01

This comprehensive handbook provides an overview of space technology and a holistic understanding of the system-of-systems that is a modern spacecraft. With a foreword by Elon Musk, CEO and CTO of SpaceX, and contributions from globally leading agency experts from NASA, ESA, JAXA, and CNES, as well as European and North American academics and industrialists, this handbook, as well as giving an interdisciplinary overview, offers, through individual self-contained chapters, more detailed understanding of specific fields, ranging through: ·         Launch systems, structures, power, thermal, communications, propulsion, and software, to ·         entry, descent and landing, ground segment, robotics, and data systems, to ·         technology management, legal and regulatory issues, and project management. This handbook is an equally invaluable asset to those on a career path towards the space industry as it is to those already within the industry.

Handbook for structural analysis of radioactive material transport casks

International Nuclear Information System (INIS)

Ikushima, Takeshi

1991-04-01

This paper described structural analysis method of radioactive material transport casks for use of a handbook of safety analysis and evaluation. Safety analysis conditions, computer codes for analyses and stress evaluation method are also involved in the handbook. (author)

SEL/Project Language. Level II, Kindergarten, Teacher's Handbook.

Science.gov (United States)

Valladares, Ann E.; Lynch, Helen C.

The Teacher's Handbook is part of the publication series of the Southeastern Education Laboratory/Project Language (SEL/PL), an 8-year language-centered program designed to alleviate the language deficiencies of disadvantaged children between the ages of four and eleven. For teachers utilizing SEL/PL, the Handbook provides a research summary and…

The Buffer and Backfill Handbook. Part 2: Materials and techniques

International Nuclear Information System (INIS)

Pusch, Roland

2001-12-01

Improved technology and prospection yielding more pure and homogeneous raw materials for preparing buffers and backfills will ultimately outdate the clays and ballast materials described in the present part of the Handbook. It describes experimentally investigated materials of potential use in repositories but other, more suitable materials will replace them in the future. The Handbook will hence have to be reviewed regularly, making room for superior materials in future, upgraded Handbook versions. Buffer is the term for dense clay used for embedment of canisters with highly radioactive waste, while backfill is soil used for filling tunnels and shafts in repositories. Examples of soil materials of potential use as buffers and backfills in repositories of KBS-3 type are described in this part of the Handbook. They are: smectitic clay materials intended for preparation of buffers (canister-embedding clay) and used as clay component in artificially prepared tunnel and shaft backfills consisting of mixtures of clay and ballast. Ballast materials intended for backfilling of tunnels and shafts and used as components of artificially prepared backfills. Smectitic natural clay soils intended for use as buffers and backfills. Very fine-grained smectite clay used as grout for sealing rock fractures. In this part of the Handbook for Buffers and Backfills, description of various candidate materials will be made with respect to their mineral composition and physical properties, with respect to the groundwater chemistry that can be expected in a deep repository in Swedish bedrock. Chapter 3 deals with smectitic clay materials intended for embedment of heat-producing canisters with highly radioactive waste. Focus is on the nature of the buffer constituents, i. e. the smectite content, the non-expanding clay minerals colloidal and the accessory non-clay minerals as well as amorphous matter and organic substances. The dominant part of the chapter describes the occurrence and origin

The Buffer and Backfill Handbook. Part 2: Materials and techniques

Energy Technology Data Exchange (ETDEWEB)

Pusch, Roland [Geodevelopment AB, Lund (Sweden)

2001-12-01

Improved technology and prospection yielding more pure and homogeneous raw materials for preparing buffers and backfills will ultimately outdate the clays and ballast materials described in the present part of the Handbook. It describes experimentally investigated materials of potential use in repositories but other, more suitable materials will replace them in the future. The Handbook will hence have to be reviewed regularly, making room for superior materials in future, upgraded Handbook versions. Buffer is the term for dense clay used for embedment of canisters with highly radioactive waste, while backfill is soil used for filling tunnels and shafts in repositories. Examples of soil materials of potential use as buffers and backfills in repositories of KBS-3 type are described in this part of the Handbook. They are: smectitic clay materials intended for preparation of buffers (canister-embedding clay) and used as clay component in artificially prepared tunnel and shaft backfills consisting of mixtures of clay and ballast. Ballast materials intended for backfilling of tunnels and shafts and used as components of artificially prepared backfills. Smectitic natural clay soils intended for use as buffers and backfills. Very fine-grained smectite clay used as grout for sealing rock fractures. In this part of the Handbook for Buffers and Backfills, description of various candidate materials will be made with respect to their mineral composition and physical properties, with respect to the groundwater chemistry that can be expected in a deep repository in Swedish bedrock. Chapter 3 deals with smectitic clay materials intended for embedment of heat-producing canisters with highly radioactive waste. Focus is on the nature of the buffer constituents, i. e. the smectite content, the non-expanding clay minerals colloidal and the accessory non-clay minerals as well as amorphous matter and organic substances. The dominant part of the chapter describes the occurrence and origin

Embedded systems handbook networked embedded systems

CERN Document Server

Zurawski, Richard

2009-01-01

Considered a standard industry resource, the Embedded Systems Handbook provided researchers and technicians with the authoritative information needed to launch a wealth of diverse applications, including those in automotive electronics, industrial automated systems, and building automation and control. Now a new resource is required to report on current developments and provide a technical reference for those looking to move the field forward yet again. Divided into two volumes to accommodate this growth, the Embedded Systems Handbook, Second Edition presents a comprehensive view on this area

Mechanical engineers' handbook, manufacturing and management

CERN Document Server

Kutz, Myer

2015-01-01

Full coverage of manufacturing and management in mechanicalengineering Mechanical Engineers' Handbook, Fourth Edition provides aquick guide to specialized areas that engineers may encounter intheir work, providing access to the basics of each and pointingtoward trusted resources for further reading, if needed. The book'saccessible information offers discussions, examples, and analysesof the topics covered, rather than the straight data, formulas, andcalculations found in other handbooks. No single engineer can be aspecialist in all areas that they are called upon to work in. It'sa discipline

Handbook of Social Media for Researchers and Supervisors

OpenAIRE

Minocha, Shailey; Petre, Marian

2012-01-01

The goal of this handbook is to assist researchers and their supervisors to adopt and use social media tools in the service of their research, and, in particular, in engaging in the discourse of research. The handbook presents an innovative suite of resources for developing and maintaining a social media strategy for research dialogues.

Handbook of electroporation

CERN Document Server

2017-01-01

This major reference work is a one-shot knowledge base on electroporation and the use of pulsed electric fields of high intensity and their use in biology, medicine, biotechnology, and food and environmental technologies. The Handbook offers a widespread and well-structured compilation of 156 chapters ranging from the foundations to applications in industry and hospital. It is edited and written by most prominent researchers in the field. With regular updates and growing in its volume it is suitable for academic readers and researchers regardless of their disciplinary expertise, and will also be accessible to students and serious general readers. The Handbook's 276 authors have established scholarly credentials and come from a wide range of disciplines. This is crucially important in a highly interdisciplinary field of electroporation and the use of pulsed electric fields of high intensity and its applications in different fields from medicine, biology, food proce ssing, agriculture, process engineering, en...

The radioactive materials packaging handbook: Design, operations, and maintenance

International Nuclear Information System (INIS)

Shappert, L.B.; Bowman, S.M.; Arnold, E.D.

1998-01-01

As part of its required activities in 1994, the US Department of Energy (DOE) made over 500,000 shipments. Of these shipments, approximately 4% were hazardous, and of these, slightly over 1% (over 6,400 shipments) were radioactive. Because of DOE's cleanup activities, the total quantities and percentages of radioactive material (RAM) that must be moved from one site to another is expected to increase in the coming years, and these materials are likely to be different than those shipped in the past. Irradiated fuel will certainly be part of the mix as will RAM samples and waste. However, in many cases these materials will be of different shape and size and require a transport packaging having different shielding, thermal, and criticality avoidance characteristics than are currently available. This Handbook provides guidance on the design, testing, certification, and operation of packages for these materials

The radioactive materials packaging handbook: Design, operations, and maintenance

Energy Technology Data Exchange (ETDEWEB)

Shappert, L.B.; Bowman, S.M. [Oak Ridge National Lab., TN (United States); Arnold, E.D. [Lockheed Martin Energy Systems, Oak Ridge, TN (United States)] [and others

1998-08-01

As part of its required activities in 1994, the US Department of Energy (DOE) made over 500,000 shipments. Of these shipments, approximately 4% were hazardous, and of these, slightly over 1% (over 6,400 shipments) were radioactive. Because of DOE`s cleanup activities, the total quantities and percentages of radioactive material (RAM) that must be moved from one site to another is expected to increase in the coming years, and these materials are likely to be different than those shipped in the past. Irradiated fuel will certainly be part of the mix as will RAM samples and waste. However, in many cases these materials will be of different shape and size and require a transport packaging having different shielding, thermal, and criticality avoidance characteristics than are currently available. This Handbook provides guidance on the design, testing, certification, and operation of packages for these materials.

Introduction to 'International Handbook of Criticality Safety Benchmark Experiments'

International Nuclear Information System (INIS)

Komuro, Yuichi

1998-01-01

The Criticality Safety Benchmark Evaluation Project (CSBEP) was initiated in 1992 by the United States Department of Energy. The project quickly became an international effort as scientists from other interested countries became involved. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) is now an official activity of the Organization for Economic Cooperation and Development-Nuclear Energy Agency (OECD-NEA). 'International Handbook of Criticality Safety Benchmark Experiments' was prepared and is updated year by year by the working group of the project. This handbook contains criticality safety benchmark specifications that have been derived from experiments that were performed at various nuclear critical facilities around the world. The benchmark specifications are intended for use by criticality safety engineers to validate calculation techniques used. The author briefly introduces the informative handbook and would like to encourage Japanese engineers who are in charge of nuclear criticality safety to use the handbook. (author)

Hazard Communication Standard

International Nuclear Information System (INIS)

Sichak, S.

1991-01-01

The current rate of technological advances has brought with it an overwhelming increase in the usage of chemicals in the workplace and in the home. Coupled to this increase has been a heightened awareness in the potential for acute and chronic injuries attributable to chemical insults. The Hazard Communication Standard has been introduced with the desired goal of reducing workplace exposures to hazardous substances and thereby achieving a corresponding reduction in adverse health effects. It was created and proclaimed by the US Department of Labor and regulated by the Occupational Safety and Health Administration. 1 tab

Handbook of satellite applications

CERN Document Server

Madry, Scott; Camacho-Lara, Sergio

2013-01-01

Top space experts from around the world have collaborated to produce this comprehensive, authoritative, and clearly illustrated reference guide to the fast growing, multi-billion dollar field of satellite applications and space communications. This handbook, done under the auspices of the International Space University based in France, addresses not only system technologies but also examines market dynamics, technical standards and regulatory constraints. The handbook is a completely multi-disciplinary reference book that covers, in an in-depth fashion, the fields of satellite telecommunications, Earth observation, remote sensing, satellite navigation, geographical information systems, and geosynchronous meteorological systems. It covers current practices and designs as well as advanced concepts and future systems. It provides a comparative analysis of the common technologies and design elements for satellite application bus structures, thermal controls, power systems, stabilization techniques, telemetry, com...

NASA systems engineering handbook

Science.gov (United States)

Shishko, Robert; Aster, Robert; Chamberlain, Robert G.; McDuffee, Patrick; Pieniazek, Les; Rowell, Tom; Bain, Beth; Cox, Renee I.; Mooz, Harold; Polaski, Lou

1995-06-01

This handbook brings the fundamental concepts and techniques of systems engineering to NASA personnel in a way that recognizes the nature of NASA systems and environment. It is intended to accompany formal NASA training courses on systems engineering and project management when appropriate, and is designed to be a top-level overview. The concepts were drawn from NASA field center handbooks, NMI's/NHB's, the work of the NASA-wide Systems Engineering Working Group and the Systems Engineering Process Improvement Task team, several non-NASA textbooks and guides, and material from independent systems engineering courses taught to NASA personnel. Five core chapters cover systems engineering fundamentals, the NASA Project Cycle, management issues in systems engineering, systems analysis and modeling, and specialty engineering integration. It is not intended as a directive.

[Comprehension of hazard pictograms of chemical products among cleaning workers].

Science.gov (United States)

Martí Fernández, Francesc; van der Haar, Rudolf; López López, Juan Carlos; Portell, Mariona; Torner Solé, Anna

2015-01-01

To assess the comprehension among cleaning workers of the hazard pictograms as defined by the Globally Harmonized System (GHS) of the United Nations, concerning the classification, labeling and packaging of substances and mixtures. A sample of 118 workers was surveyed on their perception of the GHS hazard pictograms. Comprehensibility was measured by the percentage of correct answers and the degree to which they reflected International Organization for Standardization and American National Standards Institute standards for minimum level of comprehension. The influence of different variables to predict comprehension capacity was assessed using a logistic regression model. Three groups of pictograms could be distinguished which were statistically differentiated by their comprehensibility. Pictograms reflecting "acute toxicity" and "flammable", were described correctly by 94% and 95% of the surveyed population, respectively. For pictograms reflecting "systemic toxicity", "corrosive", "warning", "environment" and "explosive" the frequency of correct answers ranged from 48% to 64%, whereas those for pictograms "oxidizing" and "compressed gas" were interpreted correctly by only 7% of respondents. Prognostic factors for poor comprehension included: not being familiar with the pictograms, not having received training on safe use of chemical products, being an immigrant and being 54 years of age or older. Only two pictograms exceeded minimum standards for comprehension. Training, a tool proven to be effective to improve the correct interpretation of danger symbols, should be encouraged, especially in those groups with greater comprehension difficulties. Copyright belongs to the Societat Catalana de Salut Laboral.

First Handbooks on History of Religion and Comparative Religion Abroad

Directory of Open Access Journals (Sweden)

Barashkov Viktor

2016-01-01

Full Text Available One of the important aspects of institutionalization of the religious studies in 1870– 1910s was the publishing of the fi rst handbooks on history of religion and comparative religion. The aim of the paper is to analyze methods and approaches of religious studies, as they described in these handbooks. The main characteristic of religion for the historians of religion was its universality. The most important methods, according to them, were historical approach, comparative approach, using of the notion «development». It is important, that we deal foremost with the «history of religion» in these handbooks, not with the «history of religions». Primitive religions were usually excluded from these handbooks, because they «have not history». First handbooks on history of religion often were edited in the series of theological handbooks, that’s why Christianity was described in them quite often as «higher» religion. Researches on comparative religion were based upon the history of religion. One of the main principles of comparative religion was that it should not deal with religious values, but only with a comparison of facts. The author concludes that scholars of religion nowadays should not only collect the facts, but also realize projects on the general history (theory of religion.

Hazardous factories: Nigerian evidence.

Science.gov (United States)

Oloyede, Olajide

2005-06-01

The past 15 years have seen an increasing governmental and corporate concern for the environment worldwide. For governments, information about the environmental performance of the industrial sector is required to inform macro-level decisions about environmental targets such as those required to meet UN directives. However, in many African, Asian, and Latin American countries, researching and reporting company environmental performance is limited. This article serves as a contribution to filling the gap by presenting evidence of physical and chemical risk in Nigerian factories. One hundred and three factories with a total of 5,021 workers were studied. One hundred and twenty physical and chemical hazards were identified and the result shows a high number of workers exposed to such hazards. The study also reveals that workers' awareness level of chemical hazards was high. Yet the danger was perceived in behavioral terms, especially by manufacturing firms, which tend to see environmental investment in an increasingly global economy as detrimental to profitability.

ICSBEP-2007, International Criticality Safety Benchmark Experiment Handbook

International Nuclear Information System (INIS)

Blair Briggs, J.

2007-01-01

1 - Description: The Critically Safety Benchmark Evaluation Project (CSBEP) was initiated in October of 1992 by the United Sates Department of Energy. The project quickly became an international effort as scientist from other interested countries became involved. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) is now an official activity of the Organization of Economic Cooperation and Development - Nuclear Energy Agency (OECD-NEA). This handbook contains criticality safety benchmark specifications that have been derived from experiments that were performed at various nuclear critical facilities around the world. The benchmark specifications are intended for use by criticality safety engineers to validate calculational techniques used to establish minimum subcritical margins for operations with fissile material. The example calculations presented do not constitute a validation of the codes or cross section data. The work of the ICSBEP is documented as an International Handbook of Evaluated Criticality Safety Benchmark Experiments. Currently, the handbook spans over 42,000 pages and contains 464 evaluations representing 4,092 critical, near-critical, or subcritical configurations and 21 criticality alarm placement/shielding configurations with multiple dose points for each and 46 configurations that have been categorized as fundamental physics measurements that are relevant to criticality safety applications. The handbook is intended for use by criticality safety analysts to perform necessary validations of their calculational techniques and is expected to be a valuable tool for decades to come. The ICSBEP Handbook is available on DVD. You may request a DVD by completing the DVD Request Form on the internet. Access to the Handbook on the Internet requires a password. You may request a password by completing the Password Request Form. The Web address is: http://icsbep.inel.gov/handbook.shtml 2 - Method of solution: Experiments that are found

75 FR 58346 - Hazardous Waste Management System; Identification and Listing of Hazardous Waste

Science.gov (United States)

2010-09-24

... Waste Management System; Identification and Listing of Hazardous Waste AGENCY: Environmental Protection... Chemical Company-Texas Operations (Eastman) to exclude (or delist) certain solid wastes generated by its Longview, Texas, facility from the lists of hazardous wastes. EPA used the Delisting Risk Assessment...

International handbook of evaluated criticality safety benchmark experiments

International Nuclear Information System (INIS)

2010-01-01

The Criticality Safety Benchmark Evaluation Project (CSBEP) was initiated in October of 1992 by the United States Department of Energy. The project quickly became an international effort as scientists from other interested countries became involved. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) became an official activity of the Organization for Economic Cooperation and Development - Nuclear Energy Agency (OECD-NEA) in 1995. This handbook contains criticality safety benchmark specifications that have been derived from experiments performed at various nuclear critical facilities around the world. The benchmark specifications are intended for use by criticality safety engineers to validate calculational techniques used to establish minimum subcritical margins for operations with fissile material and to determine criticality alarm requirement and placement. Many of the specifications are also useful for nuclear data testing. Example calculations are presented; however, these calculations do not constitute a validation of the codes or cross section data. The evaluated criticality safety benchmark data are given in nine volumes. These volumes span over 55,000 pages and contain 516 evaluations with benchmark specifications for 4,405 critical, near critical, or subcritical configurations, 24 criticality alarm placement / shielding configurations with multiple dose points for each, and 200 configurations that have been categorized as fundamental physics measurements that are relevant to criticality safety applications. Experiments that are found unacceptable for use as criticality safety benchmark experiments are discussed in these evaluations; however, benchmark specifications are not derived for such experiments (in some cases models are provided in an appendix). Approximately 770 experimental configurations are categorized as unacceptable for use as criticality safety benchmark experiments. Additional evaluations are in progress and will be

Energy manager's handbook

Energy Technology Data Exchange (ETDEWEB)

Payne, G A

1977-01-01

The handbook provides sufficient guidance on the principles involved for readers to tailor a program to meet their own requirement. The following chapters are included: Energy Conservation; Management of Energy; Delivery, Storage, and Handling of Fuels; Boilers; Furnaces; Heat Distribution and Utilization; Industrial Space Heating; Electricity; Services; and Road Transport. (MCW)

Construction project management handbook.

Science.gov (United States)

2012-03-01

The purpose of the FTA Construction Project Management Handbook is to provide guidelines for use by public transit agencies (Agen-cies) undertaking substantial construction projects, either for the first time or with little prior experience with cons...

Hazard Analysis for Pneumatic Flipper Suitport/Z-1 Manned Evaluation, Chamber B, Building 32. Revision: Basic

Science.gov (United States)

2012-01-01

One of the characteristics of an effective safety program is the recognition and control of hazards before mishaps or failures occur. Conducting potentially hazardous tests necessitates a thorough hazard analysis in order to protect our personnel from injury and our equipment from damage. The purpose of this hazard analysis is to define and address the potential hazards and controls associated with the Z1 Suit Port Test in Chamber B located in building 32, and to provide the applicable team of personnel with the documented results. It is imperative that each member of the team be familiar with the hazards and controls associated with his/her particular tasks, assignments, and activities while interfacing with facility test systems, equipment, and hardware. The goal of this hazard analysis is to identify all hazards that have the potential to harm personnel and/or damage facility equipment, flight hardware, property, or harm the environment. This analysis may also assess the significance and risk, when applicable, of lost test objectives when substantial monetary value is involved. The hazards, causes, controls, verifications, and risk assessment codes have been documented on the hazard analysis work sheets in appendix A of this document. The preparation and development of this report is in accordance with JPR 1700.1, JSC Safety and Health Handbook.

Handbook of hardware/software codesign

CERN Document Server

Teich, Jürgen

2017-01-01

This handbook presents fundamental knowledge on the hardware/software (HW/SW) codesign methodology. Contributing expert authors look at key techniques in the design flow as well as selected codesign tools and design environments, building on basic knowledge to consider the latest techniques. The book enables readers to gain real benefits from the HW/SW codesign methodology through explanations and case studies which demonstrate its usefulness. Readers are invited to follow the progress of design techniques through this work, which assists readers in following current research directions and learning about state-of-the-art techniques. Students and researchers will appreciate the wide spectrum of subjects that belong to the design methodology from this handbook. .

Springer handbook of ocean engineering

CERN Document Server

Xiros, Nikolaos

2016-01-01

The handbook is the definitive reference for the interdisciplinary field that is ocean engineering. It integrates the coverage of fundamental and applied material and encompasses a diverse spectrum of systems, concepts and operations in the maritime environment, as well as providing a comprehensive update on contemporary, leading-edge ocean technologies. Coverage includes but is not limited to; an overview of ocean science, ocean signals and instrumentation, coastal structures, developments in ocean energy technologies, and ocean vehicles and automation. The handbook will be of interest to practitioners in a range of offshore industries and naval establishments as well as academic researchers and graduate students in ocean, coastal, offshore, and marine engineering and naval architecture.

Handbook of Visual Display Technology

CERN Document Server

Cranton, Wayne; Fihn, Mark

2012-01-01

The Handbook of Visual Display Technology is a unique work offering a comprehensive description of the science, technology, economic and human interface factors associated with the displays industry. An invaluable compilation of information, the Handbook will serve as a single reference source with expert contributions from over 150 international display professionals and academic researchers. All classes of display device are covered including LCDs, reflective displays, flexible solutions and emissive devices such as OLEDs and plasma displays, with discussion of established principles, emergent technologies, and particular areas of application. The wide-ranging content also encompasses the fundamental science of light and vision, image manipulation, core materials and processing techniques, display driving and metrology.

More than Twenty Years of Svensén's Handbook

DEFF Research Database (Denmark)

Pálfi, Loránd-Levente

2010-01-01

The number of real handbooks dealing with lexicography and metalexicography is not, and has never been, impressive. When one looks at comprehensive handbooks and in addition those brought up to date, the number becomes even smaller. Because of this, but also because it has existed for more than 20...

Sample Preparation and Identification of Biological, Chemical and Mid-Spectrum Agents

National Research Council Canada - National Science Library

Hancock, J. R; Dragon, D. C

2005-01-01

A general survey of sample preparation and identification techniques for biological, chemical and mid-spectrum agents was conducted as part of Canada's contribution to a joint NATO Allied Engineering Publication (AEP) handbook...

Handbook of Best Practices for Geothermal Drilling

Energy Technology Data Exchange (ETDEWEB)

Finger, John Travis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Blankenship, Douglas A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2012-02-01

This Handbook is a description of the complex process that comprises drilling a geothermal well. The focus of the detailed Chapters covering various aspects of the process (casing design, cementing, logging and instrumentation, etc) is on techniques and hardware that have proven successful in geothermal reservoirs around the world. The Handbook will eventually be linked to the GIA web site, with the hope and expectation that it can be continually updated as new methods are demonstrated or proven.

Introduction: Green Building Handbook

CSIR Research Space (South Africa)

Van Wyk, Llewellyn V

2010-08-01

Full Text Available By recognising the specific environmental challenges facing South Africa, mindful of the government‘s commitment to reducing South Africa‘s Greenhouse gas emissions, and acknowledging the need to build social cohesion, the Green Building Handbook...

HANDBOOK: QUALITY ASSURANCE/QUALITY CONTROL (QA/QC) PROCEDURES FOR HAZARDOUS WASTE INCINERATION

Science.gov (United States)

Resource Conservation and Recovery Act regulations for hazardous waste incineration require trial burns by permit applicants. uality Assurance Project Plan (QAPjP) must accompany a trial burn plan with appropriate quality assurance/quality control procedures. uidance on the prepa...

Handbook of energy use for building construction

Energy Technology Data Exchange (ETDEWEB)

Stein, R.G.; Stein, C.; Buckley, M.; Green, M.

1980-03-01

The construction industry accounts for over 11.14% of the total energy consumed in the US annually. This represents the equivalent energy value of 1 1/4 billion barrels of oil. Within the construction industry, new building construction accounts for 5.19% of national annual energy consumption. The remaining 5.95% is distributed among new nonbuilding construction (highways, ralroads, dams, bridges, etc.), building maintenance construction, and nonbuilding maintenance construction. The handbook focuses on new building construction; however, some information for the other parts of the construction industry is also included. The handbook provides building designers with information to determine the energy required for buildings construction and evaluates the energy required for alternative materials, assemblies, and methods. The handbook is also applicable to large-scale planning and policy determination in that it provides the means to estimate the energy required to carry out major building programs.

Hazard Communication Guidelines for Compliance

National Research Council Canada - National Science Library

2000-01-01

OSHA's Hazard Communication Standard (HCS) is based on a simple concept that employees have both a need and a right to know the hazards and identities of the chemicals they are exposed to when working...

Handbook of sustainable engineering

CERN Document Server

Lee, Kun-Mo

2013-01-01

"The efficient utilization of energy, sustainable use of natural resources, and large-scale adoption of sustainable technologies is the key to a sustainable future. The Handbook of Sustainable Engineering provides tools that will help us achieve these goals". Nobel Prize Winner Dr. R.K. Pauchauri, Chairman, UN Intergovernmental Panel on Climate Change As global society confronts the challenges of diminishing resources, ecological degradation, and climate change, engineers play a crucial role designing and building technologies and products that fulfil our needs for utility and sustainability. The Handbook of Sustainable Engineering equips readers with the context and the best practices derived from both academic research and practical examples of successful implementations of sustainable technical solutions. The handbook’s content revolves around the two themes, new ways of thinking and new business models, including sustainable production, products, service systems and consumption while addressing key asse...

Preparation for the second edition of nuclear criticality safety handbook

International Nuclear Information System (INIS)

Okuno, Hiroshi; Nomura, Yasushi

1997-01-01

The making of the second edition of Nuclear Criticality Safety Handbook entered the final stage of investigation by the working group. In the second edition, the newest results of the researches in Japan were taken. In this report, among the subjects which were examined continuously from the first edition published in 1988, the size of fuel particles which can be regarded as homogeneous even in a heterogeneous system, the reactivity effect when fuel concentration distribution became not uniform in a homogeneous fuel system, the method of evaluating criticality safety in which submersion is not assumed, and the criticality data when fuel burning is considered are explained. Further, about the matters related to the criticality in chemical processes and the matters related to criticality accident, the outlines are introduced. Finally, the state of preparation for aiming at the third edition is mentioned. Criticality safety control is important for overall nuclear fuel cycle including the transportation and storage of fuel. The course of the publication of this Handbook is outlined. The matters which have been successively examined from the first edition, the results of criticality safety analysis for the dissolving tanks of fuel reprocessing, and the analysis code and the simplified evaluation method for criticality accident are reported. (K.I.)

The Video Handbook.

Science.gov (United States)

1972

In order to provide basic technical and production information for closed-circuit television, the editors have assembled this series of papers. Deisgned as an introductory guide for those entering the field, the handbook covers the basic areas of non-broadcast television. Starting with facilities and equipment the guide outlines the planning and…

Parent Involvement Handbook.

Science.gov (United States)

Caplan, Arna

This handbook on parent involvement, designed to be used with preschool programs, was developed by the Jefferson County Public Schools in Lakewood, Colorado. Included are: (1) a general statement about parent involvement in an early childhood program, (2) a description of the Jefferson County Early Childhood Program, (3) a description of the…

Trustee Essentials: A Handbook for Wisconsin Public Library Trustees.

Science.gov (United States)

Wisconsin State Dept. of Public Instruction, Madison.

This handbook for Trustees of the Wisconsin Public Library describes in detail the tasks involved in being a library trustee. The handbook comprises a number of "Trustee Essentials" that cover the basic essential information needed by Trustees, as well as sources of additional information. Contents include: The Trustee Job Description;…

Hazards from radioactive waste in perspective

International Nuclear Information System (INIS)

Cohen, B.L.

1979-01-01

This paper compares the hazards from wastes from a 1000-MW(e) nuclear power plant to these from wastes from a 1000-MW(e) coal fueled power plant. The latter hazard is much greater than the former. The toxicity and carcinogenity of the chemicals prodcued in coal burning is emphasized. Comparisions are also made with other toxic chemicals and with natural radioactivity

Suicide Bombing in the COE. DCSINT Handbook No. 1.03

National Research Council Canada - National Science Library

2005-01-01

This handbook is one in a series of supplements to TRADOC DCSINT Handbook No. 1, "A Military Guide to Terrorism in the Twenty-First Century," which is a basic terrorism primer prepared under the direction of the U.S...

DOE Fundamentals Handbook: Mathematics, Volume 1

International Nuclear Information System (INIS)

1992-06-01

The Mathematics Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of mathematics and its application to facility operation. The handbook includes a review of introductory mathematics and the concepts and functional use of algebra, geometry, trigonometry, and calculus. Word problems, equations, calculations, and practical exercises that require the use of each of the mathematical concepts are also presented. This information will provide personnel with a foundation for understanding and performing basic mathematical calculations that are associated with various DOE nuclear facility operations

DOE Fundamentals Handbook: Mathematics, Volume 2

International Nuclear Information System (INIS)

1992-06-01

The Mathematics Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of mathematics and its application to facility operation. The handbook includes a review of introductory mathematics and the concepts and functional use of algebra, geometry, trigonometry, and calculus. Word problems, equations, calculations, and practical exercises that require the use of each of the mathematical concepts are also presented. This information will provide personnel with a foundation for understanding and performing basic mathematical calculations that are associated with various DOE nuclear facility operations

Radiance Research Particle Soot/Absorption Photometer Instrument Handbook

Energy Technology Data Exchange (ETDEWEB)

Springston, S. R. [Brookhaven National Lab. (BNL), Upton, NY (United States)

2016-03-01

Radiance Research PSAPs as described in this Handbook are deployed in the second ARM Mobile Facility (AMF2) Aerosol Observing System (AOS), the third ARM Mobile Facility (AMF3) AOS, ENA AOS and Mobile Aerosol Observing System (MAOS)-A. An earlier version of the PSAP is currently operated in the ARM Aerial Facility and at SGP. The older SGP instrument is covered in a separate Handbook.

Low-level radioactive waste treatment technology. Low-level radioactive waste management handbook series

International Nuclear Information System (INIS)

1984-07-01

Each generator of low-level radioactive waste must consider three sequential questions: (1) can the waste in its as-generated form be packaged and shipped to a disposal facility; (2) will the packaged waste be acceptable for disposal; and (3) if so, is it cost effective to dispose of the waste in its as-generated form. These questions are aimed at determining if the waste form, physical and chemical characteristics, and radionuclide content collectively are suitable for shipment and disposal in a cost-effective manner. If not, the waste management procedures will involve processing operations in addition to collection, segregation, packaging, shipment, and disposal. This handbook addresses methods of treating and conditioning low-level radioactive waste for shipment and disposal. A framework is provided for selection of cost-effective waste-processing options for generic categories of low-level radioactive waste. The handbook is intended as a decision-making guide that identifies types of information required to evaluate options, methods of evaluation, and limitations associated with selection of any of the processing options

The health physics and radiological health handbook

International Nuclear Information System (INIS)

Shleien, B.

1992-01-01

This handbook was conceived in order to fill the need of health physics practitioners, technicians, and students for an easy to use, practical handbook containing health physics and radiological health data. While briefer and more specific data sources are sources are available on single subject areas, as are multi-volume compendia, there is no current up-to-date compilation of information useful on a daily basis by the health physicist. Separate abstracts have been prepared for 16 chapters in this book

PASHTO INSTRUCTOR'S HANDBOOK.

Science.gov (United States)

CHAVARRIA-AGUILAR, O.L.

THE MATERIALS IN THIS HANDBOOK CONSIST OF 64 PRONUNCIATION DRILLS FOR THE "PASHTO BASIC COURSE." THESE DRILLS ARE BASED ON A CONTRASTIVE ANALYSIS OF PASHTO AND ENGLISH PHONOLOGY AND ARE TO BE ADMINISTERED BY A NATIVE SPEAKER. SIXTY PASHTO ITEMS ARE INCLUDED IN EACH DRILL, 30 CONTAINING THE PARTICULAR SOUND BEING TAUGHT AND 30 CONTAINING…

The New Design Handbook for School Food Service. Revised.

Science.gov (United States)

Silberberg, Susan Crowl

A handbook, created for both designers and users of food service facilities in schools, provides reference information and guidance for making sure schools can provide quality food service. The handbook's first six chapters include explanations on how to start a school food service design project; required space, including kitchen work flow and…

Handbook of ecotoxicology

Science.gov (United States)

Hoffman, David J.; Rattner, Barnett A.; Burton, G. Allen; Cairns, John

1995-01-01

The Handbook of Ecotoxicology offers 34 chapters with contributions from over 50 selected international experts. The book is divided into four major sections: I. Quantifying and Measuring Ecotoxicological Effects, II. Contaminant Sources and Effects, III. Case Histories and Ecosystem Surveys, and IV. Methods for Making Estimates and Predictability in Ecotoxicology. Concepts and methodology are presented for many types of aquatic and terrestrial ecotoxicity test protocols for both controlled and field assessments. Chapters are offered on such diverse topics as sediment and soil ecotoxicity, landscape indicators, biomonitoring, and use of current bioindicators. The roles of deforestation and global warming, pathogens and disease in ecotoxicology, abiotic factors, urban runoff, predictive ecotoxicology, population modeling, and restoration ecology are discussed. This book was designed to serve as a reference book for students entering the fields of ecotoxicology, aquatic toxicology, terrestrial wildlife toxicology, and other environmental sciences. Many portions of this handbook will serve as a convenient reference text for established investigators, resource managers, and those involved in risk assessment and risk management within regulatory agencies and the private sector.

Information handbook on independent spent fuel storage installations

International Nuclear Information System (INIS)

Raddatz, M.G.; Waters, M.D.

1996-12-01

In this information handbook, the staff of the U.S. Nuclear Regulatory Commission describes (1) background information regarding the licensing and history of independent spent fuel storage installations (ISFSIs), (2) a discussion of the licensing process, (3) a description of all currently approved or certified models of dry cask storage systems (DCSSs), and (4) a description of sites currently storing spent fuel in an ISFSI. Storage of spent fuel at ISFSIs must be in accordance with the provisions of 10 CFR Part 72. The staff has provided this handbook for information purposes only. The accuracy of any information herein is not guaranteed. For verification or for more details, the reader should refer to the respective docket files for each DCSS and ISFSI site. The information in this handbook is current as of September 1, 1996

Handbook of digital games and entertainment technologies

CERN Document Server

Rauterberg, Matthias; Ciancarini, Paolo

2017-01-01

The topics treated in this handbook cover all areas of games and entertainment technologies, such as digital entertainment; technology, design/art, and sociology. The handbook consists of contributions from top class scholars and researchers from the interdisciplinary topic areas.  The aim of this handbook is to serving as a key reference work in the field and provides readers with a holistic picture of this interdisciplinary field covering technical issues, aesthetic/design issues, and sociological issues. At present, there is no reference work in the field that provides such a broad and complete picture of the field. Engineers and researchers who want to learn about this emerging area will be able to find adequate answers regarding technology issues on digital entertainment. Designers and artists can learn how their skills and expertise can contribute to this emerging area. Also researchers working in the field of sociology and psychology will find how their experience and knowledge are connected to other ...

Handbook on the history of mathematics education

CERN Document Server

Schubring, Gert

2014-01-01

This is the first comprehensive International Handbook on the History of Mathematics Education, covering a wide spectrum of epochs and civilizations, countries and cultures. Until now, much of the research into the rich and varied history of mathematics education has remained inaccessible to the vast majority of scholars,  not least because it has been written in the language, and for readers, of an individual country. And yet a historical overview, however brief, has become an indispensable element of nearly every dissertation and scholarly article. This handbook provides, for the first time, a comprehensive and systematic aid for researchers around the world in finding the information they need about historical developments in mathematics education, not only in their own countries, but globally as well. Although written primarily for mathematics educators, this handbook will also be of interest to researchers of the history of education in general, as well as specialists in cultural and even social history...

Phase-change materials handbook

Science.gov (United States)

Hale, D. V.; Hoover, M. J.; Oneill, M. J.

1972-01-01

Handbook describes relationship between phase-change materials and more conventional thermal control techniques and discusses materials' space and terrestrial applications. Material properties of most promising phase-change materials and purposes and uses of metallic filler materials in phase-change material composites are provided.

DOE Fundamentals Handbook: Classical Physics

International Nuclear Information System (INIS)

1992-06-01

The Classical Physics Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of physical forces and their properties. The handbook includes information on the units used to measure physical properties; vectors, and how they are used to show the net effect of various forces; Newton's Laws of motion, and how to use these laws in force and motion applications; and the concepts of energy, work, and power, and how to measure and calculate the energy involved in various applications. This information will provide personnel with a foundation for understanding the basic operation of various types of DOE nuclear facility systems and equipment

Handbook on Windows and Energy

DEFF Research Database (Denmark)

Thomsen, Kirsten Engelund; Schultz, Jørgen Munthe; Svendsen, Sv Aa Højgaard

The handbook on windows and energy is a general description of windows with the main focus put on the energy performance. Common window products are described by commonly used nomenclature, description of frame and sash conctructions and description of commonly used glazing types.The energy...... transmission through windows is described in detail including radiation, convection and conduction as well as solar transmittance of window glazing. The most used terms related to characterization of window energy performance are defined and calculation methods according to international standards...... flow and detailed calculation of light and solar transmittance is given.Different measurement techniques for characterization of window heat loss coefficient and total solar energy transmittance is described and references to interantional standards are given.Finally, the handbook includes...

Handbook on the Experience Economy

DEFF Research Database (Denmark)

This illuminating Handbook presents the state-of-the-art in the scientific field of experience economy studies. It offers a rich and varied collection of contributions that discuss different issues of crucial importance for our understanding of the experience economy. Each chapter reflects diverse...... an insight into how receivers react to experiential elements of experience economy studies. An innovative presentation of experience economics, this is a remarkable collection of new theory and analyses. This book will prove an invaluable resource to researchers and students in management, marketing...... scientific viewpoints from disciplines including management, mainstream economics and sociology to provide a comprehensive overview. The Handbook is divided into three subsections to explore progression in the scientific field of experience economy studies. The first section focuses on fundamental debates...

Integrated Baseline Review (IBR) Handbook

Science.gov (United States)

Fleming, Jon F.; Kehrer, Kristen C.

2016-01-01

The purpose of this handbook is intended to be a how-to guide to prepare for, conduct, and close-out an Integrated Baseline Review (IBR). It discusses the steps that should be considered, describes roles and responsibilities, tips for tailoring the IBR based on risk, cost, and need for management insight, and provides lessons learned from past IBRs. Appendices contain example documentation typically used in connection with an IBR. Note that these appendices are examples only, and should be tailored to meet the needs of individual projects and contracts. Following the guidance in this handbook will help customers and suppliers preparing for an IBR understand the expectations of the IBR, and ensure that the IBR meets the requirements for both in-house and contract efforts.

Occupational hazards in hospitals: accidents, radiation, exposure to noxious chemicals, drug addiction and psychic problems, and assault

Energy Technology Data Exchange (ETDEWEB)

Gestal, J.J.

1987-08-01

Except for infectious diseases all the main occupational hazards affecting health workers are reviewed: accidents (explosions, fires, electrical accidents, and other sources of injury); radiation (stochastic and non-stochastic effects, protective measures, and personnel most at risk); exposure to noxious chemicals, whose effects may be either local (allergic eczema) or generalised (cancer, mutations), particular attention being paid to the hazards presented by formol, ethylene oxide, cytostatics, and anaesthetic gases; drug addiction (which is more common among health workers than the general population) and psychic problems associated with promotion, shift work, and emotional stress; and assault (various types of assault suffered by health workers, its causes, and the characterisation of the most aggressive patients).

Occupational hazards in hospitals: accidents, radiation, exposure to noxious chemicals, drug addiction and psychic problems, and assault

International Nuclear Information System (INIS)

Gestal, J.J.

1987-01-01

Except for infectious diseases all the main occupational hazards affecting health workers are reviewed: accidents (explosions, fires, electrical accidents, and other sources of injury); radiation (stochastic and non-stochastic effects, protective measures, and personnel most at risk); exposure to noxious chemicals, whose effects may be either local (allergic eczema) or generalised (cancer, mutations), particular attention being paid to the hazards presented by formol, ethylene oxide, cytostatics, and anaesthetic gases; drug addiction (which is more common among health workers than the general population) and psychic problems associated with promotion, shift work, and emotional stress; and assault (various types of assault suffered by health workers, its causes, and the characterisation of the most aggressive patients). (author)

Handbook of Brain Connectivity

CERN Document Server

Jirsa, Viktor K

2007-01-01

Our contemporary understanding of brain function is deeply rooted in the ideas of the nonlinear dynamics of distributed networks. Cognition and motor coordination seem to arise from the interactions of local neuronal networks, which themselves are connected in large scales across the entire brain. The spatial architectures between various scales inevitably influence the dynamics of the brain and thereby its function. But how can we integrate brain connectivity amongst these structural and functional domains? Our Handbook provides an account of the current knowledge on the measurement, analysis and theory of the anatomical and functional connectivity of the brain. All contributors are leading experts in various fields concerning structural and functional brain connectivity. In the first part of the Handbook, the chapters focus on an introduction and discussion of the principles underlying connected neural systems. The second part introduces the currently available non-invasive technologies for measuring struct...

Handbook on the physics and chemistry of rare earths

International Nuclear Information System (INIS)

Gschneidner, K.A. Jr.; Eyring, L.

1982-01-01

This handbook is a six-volume work which covers the entire rare earth field in an integrated manner. Each chapter is a comprehensive, up-to-date, critical review of a particular segment of the field. The first volume is devoted to the rare earth metals, the second to rare earth alloys and intermetallics, and the third and fourth volumes to the non-metallic rare earth materials, including solutions, complexes and bioinorganic substances, in addition to solid inorganic compounds. The electronic structure of these unique elements is the primary basis of understanding their physical, metallurgical and chemical natures. The interrelationship of the 4f and valence electrons and the observed optical, electrical, magnetic, crystallographic, elastic, thermal, mechanical, chemical, geochemical and biological behaviors is brought forth time and again throughout the chapters. Also discussed are the preparative, separation and solution chemistry of the elements and their compounds and the various chemical and physical analytical methods for determining the rare earths in various materials and impurities in a rare earth matrix. Vol. 5 is a update complement of the previous volumes. Volume 6 is concerned with ternary and higher order materials. (Auth.)

Handbook of biomass downdraft gasifier engine systems

Energy Technology Data Exchange (ETDEWEB)

Reed, T B; Das, A

1988-03-01

This handbook has been prepared by the Solar Energy Research Institute under the US Department of Energy /bold Solar Technical Information Program/. It is intended as a guide to the design, testing, operation, and manufacture of small-scale (less than 200 kW (270 hp)) gasifiers. A great deal of the information will be useful for all levels of biomass gasification. The handbook is meant to be a practical guide to gasifier systems, and a minimum amount of space is devoted to questions of more theoretical interest.

An energy handbook for teachers in Finland

International Nuclear Information System (INIS)

Lavonen, J.

1994-01-01

The purpose of this handbook for teachers is to provide an introduction to the principles and practices of energy education. It is composed of three sections plus commercial materials from energy companies. Part 1 discusses important aspects of energy and teaching methods. Part 2 provides graphical information showing how energy is produced and consumed in Finland. Part 3 is an introduction to energy from various aspects. One focus in the handbook is nuclear energy. Workshops on energy are also proposed to teachers. 8 figs., 2 refs

Reaction diffusion and solid state chemical kinetics handbook

CERN Document Server

Dybkov, V I

2010-01-01

This monograph deals with a physico-chemical approach to the problem of the solid-state growth of chemical compound layers and reaction-diffusion in binary heterogeneous systems formed by two solids; as well as a solid with a liquid or a gas. It is explained why the number of compound layers growing at the interface between the original phases is usually much lower than the number of chemical compounds in the phase diagram of a given binary system. For example, of the eight intermetallic compounds which exist in the aluminium-zirconium binary system, only ZrAl3 was found to grow as a separate

DOE Hazardous Waste Program

International Nuclear Information System (INIS)

Eyman, L.D.; Craig, R.B.

1985-01-01

The goal of the DOE Hazardous Waste Program is to support the implementation and improvement of hazardous-chemical and mixed-radioactive-waste management such that public health, safety, and the environment are protected and DOE missions are effectively accomplished. The strategy for accomplishing this goal is to define the character and magnitude of hazardous wastes emanating from DOE facilities, determine what DOE resources are available to address these problems, define the regulatory and operational constraints, and develop programs and plans to resolve hazardous waste issues. Over the longer term the program will support the adaptation and application of technologies to meet hazardous waste management needs and to implement an integrated, DOE-wide hazardous waste management strategy. 1 reference, 1 figure

Film Editing Handbook; Technique of 16mm Film Cutting.

Science.gov (United States)

Churchill, Hugh B.

Designed to help the film student with the complexities of 16mm film cutting, this handbook catalogs the mechanical procedures of both picture and sound cutting and supplies step-by-step explanations of these procedures. Because the handbook was organized so that it could be used while working at the cutting bench, common cutting problems and…

Methodology - PSA Regulatory handbook. Comparisons to a modern PSA study

International Nuclear Information System (INIS)

Bostroem, Urban; Jung, Gunnar; Flodin, Yngve

2003-03-01

The regulatory handbook is applicable to all types of initiating events and all operating conditions. It should be noted that it does not make the traditional subdivision of PSA into internal and external events, level 1 and level 2 PSA, or power operation and shut-down. The reason for this is that this has given the regulatory handbook a more logical structure, and that this approach underlines the integrated character of PSA when it comes to creating the plan risk profile. The regulatory handbook has been structured following the requirements on a PSA for a nuclear power plant, as this is the most demanding application. However, it is applicable also to the analysis of other nuclear installations. The purpose of the comparative review presented in this report has been to, as part of a quality review establish the PSA Handbook, compare (parts of) the handbook and its criteria with a recent PSA analysis, and to identify major discrepancies. Considerable weight has also been allocated to a review of the plant model (Risk Spectrum event trees and fault trees). The results presented in the report are not based on a complete review of the PSA in question (or of the complete PSA Handbook). Following discussions between the SKI and SwedPower, and based on the experience of the SwedPower reviewers, the following issues were chosen to be the main parts of the project: 1) General comparison according to content and transparency - Levels of ambition in PSA Handbook, PSA method description and actual PSA report. 2) Detailed comparison of: Selected component failure data - Assumptions regarding room events - CCI frequencies, realism, identification, categorisation - Taking credit for non-safety classified systems - Event tree modelling - Presentation of results 3) Fault tree model, specifically - Time frame for crediting of battery capacity - Modelling of regulators - Modelling of dependencies for room events - general quality, like how the paper documentation and the logic

Chemical dependency: an occupational hazard in the field of anaesthesia.

Science.gov (United States)

Ismail, Samina

2010-10-01

The medical personnel are vulnerable to substance abuse and dependence due to ready access to substance of abuse. Addiction is considered as an occupational hazard for those involved in the practice of anaesthesia for the same reason. Substance abuse is defined as a psychosocial biogenetic disease, which results from dynamic interplay between a susceptible host and favourable environment. According to the 5th and the last National Survey on Drug Abuse (NSDA) in 1993 by Pakistan Narcotic Control, there are nearly three million drug dependants in Pakistan, but no data is available to determine the prevalence among medical or anaesthesia personnel. In order to handle the rising trend of chemical abuse, we need to have more surveys and studies on this subject, written policy and educational programme in postgraduate training with proper control and frequent checking of narcotic dispensing. Reporting of drug abuse and rehabilitation of affected doctors are areas which need to be worked upon.

''Hazardous'' terminology

International Nuclear Information System (INIS)

Powers, J.

1991-01-01

A number of terms (e.g., ''hazardous chemicals,'' ''hazardous materials,'' ''hazardous waste,'' and similar nomenclature) refer to substances that are subject to regulation under one or more federal environmental laws. State laws and regulations also provide additional, similar, or identical terminology that may be confused with the federally defined terms. Many of these terms appear synonymous, and it easy to use them interchangeably. However, in a regulatory context, inappropriate use of narrowly defined terms can lead to confusion about the substances referred to, the statutory provisions that apply, and the regulatory requirements for compliance under the applicable federal statutes. This information Brief provides regulatory definitions, a brief discussion of compliance requirements, and references for the precise terminology that should be used when referring to ''hazardous'' substances regulated under federal environmental laws. A companion CERCLA Information Brief (EH-231-004/0191) addresses ''toxic'' nomenclature

Handbook on dynamics of jointed structures.

Energy Technology Data Exchange (ETDEWEB)

Ames, Nicoli M.; Lauffer, James P.; Jew, Michael D.; Segalman, Daniel Joseph; Gregory, Danny Lynn; Starr, Michael James; Resor, Brian Ray

2009-07-01

The problem of understanding and modeling the complicated physics underlying the action and response of the interfaces in typical structures under dynamic loading conditions has occupied researchers for many decades. This handbook presents an integrated approach to the goal of dynamic modeling of typical jointed structures, beginning with a mathematical assessment of experimental or simulation data, development of constitutive models to account for load histories to deformation, establishment of kinematic models coupling to the continuum models, and application of finite element analysis leading to dynamic structural simulation. In addition, formulations are discussed to mitigate the very short simulation time steps that appear to be required in numerical simulation for problems such as this. This handbook satisfies the commitment to DOE that Sandia will develop the technical content and write a Joints Handbook. The content will include: (1) Methods for characterizing the nonlinear stiffness and energy dissipation for typical joints used in mechanical systems and components. (2) The methodology will include practical guidance on experiments, and reduced order models that can be used to characterize joint behavior. (3) Examples for typical bolted and screw joints will be provided.

Hanford Facility RCRA permit handbook

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Purpose of this Hanford Facility (HF) RCRA Permit Handbook is to provide, in one document, information to be used for clarification of permit conditions and guidance for implementing the HF RCRA Permit.

Hazard analysis in uranium hexafluoride production facility

International Nuclear Information System (INIS)

Marin, Maristhela Passoni de Araujo

1999-01-01

The present work provides a method for preliminary hazard analysis of nuclear fuel cycle facilities. The proposed method identify both chemical and radiological hazards, as well as the consequences associated with accident scenarios. To illustrate the application of the method, a uranium hexafluoride production facility was selected. The main hazards are identified and the potential consequences are quantified. It was found that, although the facility handles radioactive material, the main hazards as associated with releases of toxic chemical substances such as hydrogen fluoride, anhydrous ammonia and nitric acid. It was shown that a contention bung can effectively reduce the consequences of atmospheric release of toxic materials. (author)

Radon and its hazards

International Nuclear Information System (INIS)

Chang Guilan

2002-01-01

The author describes basic physical and chemical properties of radon and the emanation, introduces methods of radon measurement, expounds the hazards of non-mine radon accumulation to the health of human being and the protection, as well as the history how the human being recognizes the hazards of radon through the specific data and examples, and finally proposes protecting measures to avoid the hazards of radon to the health of human being, and to do ecologic evaluation of environments

The Packaging Handbook -- A guide to package design

International Nuclear Information System (INIS)

Shappert, L.B.

1995-01-01

The Packaging Handbook is a compilation of 14 technical chapters and five appendices that address the life cycle of a packaging which is intended to transport radioactive material by any transport mode in normal commerce. Although many topics are discussed in depth, this document focuses on the design aspects of a packaging. The Handbook, which is being prepared under the direction of the US Department of Energy, is intended to provide a wealth of technical guidance that will give designers a better understanding of the regulatory approval process, preferences of regulators in specific aspects of packaging design, and the types of analyses that should be seriously considered when developing the packaging design. Even though the Handbook is concerned with all packagings, most of the emphasis is placed on large packagings that are capable of transporting large radioactive sources that are also fissile (e.g., spent fuel). These are the types of packagings that must address the widest range of technical topics in order to meet domestic and international regulations. Most of the chapters in the Handbook have been drafted and submitted to the Oak Ridge National Laboratory for editing; the majority of these have been edited. This report summarizes the contents

The Military Instructor's Handbook

DEFF Research Database (Denmark)

Sjøstedt, Peter; Grønlund, Thomas

The Military Instructor's handbook was written for the basic professional training of instructors in the danish defence. The book describes the work of instructors and their areas of responsibility, and it offers guidance and direction on how to plan, conduct and evaluate learning activities...

Experimental outgassing of toxic chemicals to simulate the characteristics of hazards tainting globally shipped products.

Directory of Open Access Journals (Sweden)

Lygia Therese Budnik

Full Text Available Ambient monitoring analyses may identify potential new public health hazards such as residual levels of fumigants and industrial chemicals off gassing from products and goods shipped globally. We analyzed container air with gas chromatography coupled to mass spectrometry (TD-2D-GC-MS/FPD and assessed whether the concentration of the volatiles benzene and 1,2-dichloroethane exceeded recommended exposure limits (REL. Products were taken from transport containers and analyzed for outgassing of volatiles. Furthermore, experimental outgassing was performed on packaging materials and textiles, to simulate the hazards tainting from globally shipped goods. The mean amounts of benzene in analyzed container air were 698-fold higher, and those of ethylene dichloride were 4.5-fold higher than the corresponding REL. More than 90% of all containers struck with toluene residues higher than its REL. For 1,2-dichloroethane 53% of containers, transporting shoes exceeded the REL. In standardized experimental fumigation of various products, outgassing of 1,2-dichloroethane under controlled laboratory conditions took up to several months. Globally produced transported products tainted with toxic industrial chemicals may contribute to the mixture of volatiles in indoor air as they are likely to emit for a long period. These results need to be taken into account for further evaluation of safety standards applying to workers and consumers.

Handbook of nuclear medicine practice in developing countries

International Nuclear Information System (INIS)

1992-01-01

This ''Handbook of Nuclear Medicine Practices in the Developing Countries'' is meant primarily for those, who intend to install and practice nuclear medicine in a developing country. By and large, the conventional Textbooks of nuclear medicine do note cater to the special problems and needs of these countries. The Handbook is not trying to replace these textbooks, but supplement them with special information and guidance, necessary for making nuclear medicine cost-effective and useful in a hospital of a developing country. It is written mostly by those, who have made success in their careers in nuclear medicine, in one of these countries. One way to describe this Handbook will be that it represents the ways, in which, nuclear medicine is practised in the developing countries, described by those, who have a long and authentic experience of practising nuclear medicine in a developing country

Hazardous Substances Data Bank (HSDB)

Data.gov (United States)

U.S. Department of Health & Human Services — Comprehensive, peer-reviewed toxicology data for about 5,000 chemicals. The data bank focuses on the toxicology of potentially hazardous chemicals. It is enhanced...

Safe handling of radioactive isotopes. Handbook 42

Energy Technology Data Exchange (ETDEWEB)

NONE

1949-09-15

With the increasing use of radioactive isotopes by industry, the medical profession, and research laboratories, it is essential that certain minimal precautions be taken to protect the users and the public. The recommendations contained in this handbook represent what is believed to be the best available opinions on the subject as of this date. As our experience with radioisotopes broadens, we will undoubtedly be able to improve and strengthen the recommendations for their safe handling and utilization. Through the courtesy of the National Research Council about a year ago, several hundred draft copies of this report were circulated to all leading workers and authorities in the field for comment and criticism. The present handbook embodies all pertinent suggestions received from these people. Further comment will be welcomed by the committee. One of the greatest difficulties encountered in the preparation of this handbook lay in the uncertainty regarding permissible radiation exposure levels - particularly for ingested radioactive materials. The establishment of sound figures for such exposure still remains a problem of high priority for many conditions and radioactive substances. Such figures as are used in this report represent the best available information today. If, in the future, these can be improved upon, appropriate corrections will be issued. The subject will be under continuous study by the two subcommittees mentioned above. The present Handbook has been prepared by the Subcommittee on the Handling of Radioactive Isotopes and Fission Products.

Safe handling of radioactive isotopes. Handbook 42

International Nuclear Information System (INIS)

1949-09-01

With the increasing use of radioactive isotopes by industry, the medical profession, and research laboratories, it is essential that certain minimal precautions be taken to protect the users and the public. The recommendations contained in this handbook represent what is believed to be the best available opinions on the subject as of this date. As our experience with radioisotopes broadens, we will undoubtedly be able to improve and strengthen the recommendations for their safe handling and utilization. Through the courtesy of the National Research Council about a year ago, several hundred draft copies of this report were circulated to all leading workers and authorities in the field for comment and criticism. The present handbook embodies all pertinent suggestions received from these people. Further comment will be welcomed by the committee. One of the greatest difficulties encountered in the preparation of this handbook lay in the uncertainty regarding permissible radiation exposure levels - particularly for ingested radioactive materials. The establishment of sound figures for such exposure still remains a problem of high priority for many conditions and radioactive substances. Such figures as are used in this report represent the best available information today. If, in the future, these can be improved upon, appropriate corrections will be issued. The subject will be under continuous study by the two subcommittees mentioned above. The present Handbook has been prepared by the Subcommittee on the Handling of Radioactive Isotopes and Fission Products

41 CFR 105-60.304 - Public information handbook and index.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Public information handbook and index. 105-60.304 Section 105-60.304 Public Contracts and Property Management Federal Property... index. GSA publishes a handbook for the public that identifies information regarding any matter...

A suggested approach to the selection of chemical and biological protective clothing--meeting industry and emergency response needs for protection against a variety of hazards.

Science.gov (United States)

Stull, Jeffrey O

2004-01-01

The paper describes the development of a comprehensive decision logic for selection and use of biological and chemical protective clothing (BCPC). The decision logic recognizes the separate areas of BCPC use among emergency, biological, and chemical hazards. The proposed decision logic provides a system for type classifying BCPC in terms of its compliance with existing standards (for emergency applications), the overall clothing integrity, and the material barrier performance. Type classification is offered for garments, gloves, footwear, and eye/face protection devices. On the basis of multiple, but simply designed flowcharts, the type of BCPC appropriate for specific biological and chemical hazards can be selected. The decision logic also provides supplemental considerations for choosing appropriate BCPC features.

Building 6630 hazards assessment document

International Nuclear Information System (INIS)

Williams, M.; Banda, Z.

1996-10-01

The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with Building 6630. The entire inventory was subjected to the screening criteria for potential airborne impact to onsite and offsite individuals out of which one chemical was kept for further evaluation. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the chemical release site, the atmospheric conditions, and the circumstances of the release. The greatest distance at which a postulated facility event will produce consequences exceeding the Early Severe Health Effects threshold is 76 meters. The highest emergency classification is an Alert. The Emergency Planning Zone is a nominal 100 meter area that conforms to DOE boundaries and physical/jurisdictional boundaries such as fence lines and streets

Gases and vacua handbook of vacuum physics

CERN Document Server

Beck, A H

2013-01-01

Handbook of Vacuum Physics, Volume 1: Gases and Vacua provides information on the many aspects of vacuum technology, from material on the quantum theoretical aspects of the complex semi-conductors used for thermionic and photo-electric emission to data on the performance of commercially available pumps, gauges, and high-vacuum materials. The handbook satisfies the need of workers using vacuum apparatuses or works on the diverse applications of high-vacuum technology in research and industry. The book is a compilation of long articles prepared by experts in vacuum technology. Sufficient theoret

Linear electric machines, drives, and MAGLEVs handbook

CERN Document Server

Boldea, Ion

2013-01-01

Based on author Ion Boldea's 40 years of experience and the latest research, Linear Electric Machines, Drives, and Maglevs Handbook provides a practical and comprehensive resource on the steady improvement in this field. The book presents in-depth reviews of basic concepts and detailed explorations of complex subjects, including classifications and practical topologies, with sample results based on an up-to-date survey of the field. Packed with case studies, this state-of-the-art handbook covers topics such as modeling, steady state, and transients as well as control, design, and testing of li

Handbook of smart antennas for RFID systems

CERN Document Server

2010-01-01

The Handbook of Smart Antennas for RFID Systems is a single comprehensive reference on the smart antenna technologies applied to RFID. This book will provide a timely reference book for researchers and students in the areas of both smart antennas and RFID technologies. It is the first book to combine two of the most important wireless technologies together in one book. The handbook will feature chapters by leading experts in both academia and industry offering an in-depth description of terminologies and concepts related to smart antennas in various RFID systems applications.

DOE Fundamentals Handbook: Electrical Science, Volume 2

International Nuclear Information System (INIS)

1992-06-01

The Electrical Science Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding terminology, and application. The handbook includes information on alternating current (AC) and direct current (DC) theory, circuits, motors, and generators; AC power and reactive components; batteries; AC and DC voltage regulators; transformers; and electrical test instruments and measuring devices. This information will provide personnel with a foundation for understanding the basic operation of various types of DOE nuclear facility electrical equipment

Pipeline integrity handbook risk management and evaluation

CERN Document Server

Singh, Ramesh

2013-01-01

Based on over 40 years of experience in the field, Ramesh Singh goes beyond corrosion control, providing techniques for addressing present and future integrity issues. Pipeline Integrity Handbook provides pipeline engineers with the tools to evaluate and inspect pipelines, safeguard the life cycle of their pipeline asset and ensure that they are optimizing delivery and capability. Presented in easy-to-use, step-by-step order, Pipeline Integrity Handbook is a quick reference for day-to-day use in identifying key pipeline degradation mechanisms and threats to pipeline integrity. The book begins

DOE Fundamentals Handbook: Electrical Science, Volume 1

International Nuclear Information System (INIS)

1992-06-01

The Electrical Science Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of electrical theory, terminology, and application. The handbook includes information on alternating current (AC) and direct current (DC) theory, circuits, motors, and generators; AC power and reactive components; batteries; AC and DC voltage regulators; transformers; and electrical test instruments and measuring devices. This information will provide personnel with a foundation for understanding the basic operation of various types of DOE nuclear facility electrical equipment

DOE Fundamentals Handbook: Electrical Science, Volume 3

International Nuclear Information System (INIS)

1992-06-01

The Electrical Science Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of electrical theory, terminology, and application. The handbook includes information on alternating current (AC) and direct current (DC) theory, circuits, motors and generators; AC power and reactive components; batteries; AC and DC voltage regulators; transformers; and electrical test instruments and measuring devices. This information will provide personnel with a foundation for understanding the basic operation of various types of DOE nuclear facility electrical equipment

DOE Fundamentals Handbook: Electrical Science, Volume 4

International Nuclear Information System (INIS)

1992-06-01

The Electrical Science Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of electrical theory, terminology, and application. The handbook includes information on alternating current (AC) and direct current (DC) theory, circuits, motors, and generators; AC power and reactive transformers; and electrical test components; batteries; AC and DC voltage regulators; instruments and measuring devices. This information will provide personnel with a foundation for understanding the basic operation of various types of DOE nuclear facility electrical equipment

Rain Gauges Handbook

Energy Technology Data Exchange (ETDEWEB)

Bartholomew, M. J. [Brookhaven National Lab. (BNL), Upton, NY (United States)

2016-01-01

To improve the quantitative description of precipitation processes in climate models, the Atmospheric Radiation Measurement (ARM) Climate Research Facility deployed rain gauges located near disdrometers (DISD and VDIS data streams). This handbook deals specifically with the rain gauges that make the observations for the RAIN data stream. Other precipitation observations are made by the surface meteorology instrument suite (i.e., MET data stream).

Wind energy a reference handbook

CERN Document Server

Newton, PhD, David E

2014-01-01

While covering the fascinating history of wind power as a whole, this timely handbook focuses on current technological developments and the promise--and pitfalls--of wind energy as part of the world's energy future.

Urban Farm Business Plan Handbook

Science.gov (United States)

The Urban Farm Business Plan Handbook (this document) provides guidance for developing a business plan for the startup and operation of an urban farm. It focuses on food and non-food related cultivated agriculture.

European food law handbook

NARCIS (Netherlands)

Meulen, van der B.M.J.; Velde, van der M.; Szajkowska, A.; Verbruggen, R.

2008-01-01

This handbook analyses and explains the institutional, substantive and procedural elements of EU food law, taking the General Food Law as a focus point. Principles are discussed as well as specific rules addressing food as a product, the processes related to food and communication about food through

Oil economists' handbook 1984

Energy Technology Data Exchange (ETDEWEB)

Jenkins, G [ed.

1983-01-01

This handbook lists statistics on energy resources, production and consumption; petroleum refining, products, storage, quality and prices; shipping; pipelines; and energy companies. Conversion factors, a dictionary of terms, and a chronology of major events (1919-1938) are included. The data given runs up to 1982/83.

Environmental and Social Management System Implementation Handbook : Crop Production

OpenAIRE

International Finance Corporation

2014-01-01

This Handbook is intended to be a practical guide to help companies in the crop production industry develop and implement an environmental and social management system, which should help to improve overall operations. If a company has existing management systems for quality or health and safety, this Handbook will help to expand them to include environmental and social performance. Sectio...

Completion of the radioactive materials packaging handbook

International Nuclear Information System (INIS)

Shappert, L.B.

1998-01-01

'The Radioactive Materials Packaging Handbook: Design, Operation and Maintenance', which will serve as a replacement for the 'Cask Designers Guide'(1970), has now been completed and submitted to the Oak Ridge National Laboratory (ORNL) electronics publishing group for layout and printing; it is scheduled to be printed in late spring 1998. The Handbook, written by experts in their particular fields, is a compilation of technical chapters that address the design aspects of a package intended for transporting radioactive material in normal commerce; it was prepared under the direction of M. E. Wangler of the US DOE and is intended to provide a wealth of technical guidance that will give designers a better understanding of the regulatory approval process, preferences of regulators on specific aspects of package design, and the types of analyses that should be considered when designing a package to carry radioactive materials. Even though the Handbook is concerned with both small and large packagings, most of the emphasis is placed on large packagings that are capable of transporting fissile, radioactive sources (e.g. spent fuels). The safety analysis reports for packagings (SARPs) must address the widest range of technical topics in order to meet United States and/or international regulations, all of which are covered in the Handbook. One of the primary goals of the Handbook is to provide information which would guide designers of radioactive materials packages to make decisions that would most likely be acceptable to regulatory agencies during the approval process of the packaging. It was therefore important to find those authors who not only were experts in one or more of the areas that are addressed in a SARP, but who also had been exposed to the regulatory process or had operational experience dealing with a wide variety of package types. Twenty-five such people have contributed their time and talents to the development of this document, mostly on a volunteer basis

The data analysis handbook

CERN Document Server

Frank, IE

1994-01-01

Analyzing observed or measured data is an important step in applied sciences. The recent increase in computer capacity has resulted in a revolution both in data collection and data analysis. An increasing number of scientists, researchers and students are venturing into statistical data analysis; hence the need for more guidance in this field, which was previously dominated mainly by statisticians. This handbook fills the gap in the range of textbooks on data analysis. Written in a dictionary format, it will serve as a comprehensive reference book in a rapidly growing field. However, this book is more structured than an ordinary dictionary, where each entry is a separate, self-contained entity. The authors provide not only definitions and short descriptions, but also offer an overview of the different topics. Therefore, the handbook can also be used as a companion to textbooks for undergraduate or graduate courses. 1700 entries are given in alphabetical order grouped into 20 topics and each topic is organized...

Springer handbook of spacetime

CERN Document Server

Petkov, Vesselin

2014-01-01

The Springer Handbook of Spacetime is dedicated to the ground-breaking paradigm shifts embodied in the two relativity theories, and describes in detail the profound reshaping of physical sciences they ushered in. It includes in a single volume chapters on foundations, on the underlying mathematics, on physical and astrophysical implications, experimental evidence and cosmological predictions, as well as chapters on efforts to unify general relativity and quantum physics. The Handbook can be used as a desk reference by researchers in a wide variety of fields, not only by specialists in relativity but also by researchers in related areas that either grew out of, or are deeply influenced by, the two relativity theories: cosmology, astronomy and astrophysics, high energy physics, quantum field theory, mathematics, and philosophy of science. It should also serve as a valuable resource for graduate students and young researchers entering these areas, and for instructors who teach courses on these subjects. The Han...

Handbook of mass measurement

CERN Document Server

Jones, Frank E

2002-01-01

"How much does it weigh?" seems a simple question. To scientists and engineers, however, the answer is far from simple, and determining the answer demands consideration of an almost overwhelming number of factors.With an intriguing blend of history, fundamentals, and technical details, the Handbook of Mass Measurement sets forth the details of achieving the highest precision in mass measurements. It covers the whole field, from the development, calibration, and maintenance of mass standards to detailed accounts of weighing designs, balances, and uncertainty. It addresses the entire measurement process and provides in-depth examinations of the various factors that introduce error.Much of the material is the authors'' own work and some of it is published here for the first time. Jones and Schoonover are both highly regarded veterans of the U.S. National Institute of Standards and Technology. With this handbook, they have provided a service and resource vital to anyone involved not only in the determination of m...

In vitro methods for hazard assessment of industrial chemicals – opportunities and challenges

Directory of Open Access Journals (Sweden)

Chin Lin eWong

2015-05-01

Full Text Available Allergic contact dermatitis (ACD is a delayed-type hypersensitivity immune reaction mediated by T-lymphocytes as a result of repeated exposure of an allergen primarily on skin. ACD accounts for up to 95% of occupational skin diseases (OSDs, with epoxy resins implicated as one of the most common causes of ACD. Efficient high-throughput in vitro screening for accurate identification of compounds and materials that may pose hazardous risks in the workplace is crucial. At present, the murine local lymph node assay (LLNA is the ‘method of choice’ for predicting the sensitizing potency of contact allergens. As the 3Rs principles of reduction, refinement and replacement in animal testing has gained political and economic momentum, several in vitro screening methods have been developed for identifying potential contact allergens. To date, these latter methods have been utilized primarily to assess the skin sensitizing potential of the chemical components of cosmetic products with scant research attention as to the applicability of these methods to industrial chemicals, particularly epoxy resins. Herein we review the currently utilized in vitro methods and identify the knowledge gaps with regard to assessing the generalizability of in vitro screening methods for assessing the skin sensitizing potential of industrial chemicals.

Intuitive Music:A Mini-Handbook: Version 2009f

OpenAIRE

Bergstrøm-Nielsen, Carl

2009-01-01

Handbook for people who wish to play or teach freely improvised music and improvisation pieces. With sections on how to start with different types of groups, training of musical awareness, parameters of the musical sound, the history of improvised music and a bibliography. - Greek translation by Demetrios Psychas, 2013. Handbook for people who wish to play or teach freely improvised music and improvisation pieces. With sections on how to start with different types of groups, training of mu...

Handbook of nuclear medicine practice in developing countries

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

This ``Handbook of Nuclear Medicine Practices in the Developing Countries`` is meant primarily for those, who intend to install and practice nuclear medicine in a developing country. By and large, the conventional Textbooks of nuclear medicine do note cater to the special problems and needs of these countries. The Handbook is not trying to replace these textbooks, but supplement them with special information and guidance, necessary for making nuclear medicine cost-effective and useful in a hospital of a developing country. It is written mostly by those, who have made success in their careers in nuclear medicine, in one of these countries. One way to describe this Handbook will be that it represents the ways, in which, nuclear medicine is practised in the developing countries, described by those, who have a long and authentic experience of practising nuclear medicine in a developing country Figs, tabs

Faculty Handbook. Regis College.

Science.gov (United States)

Regis Coll., Weston, MA.

Regis College policies and procedures are described in this 1976 faculty handbook. Chapter 1 covers college organization and governance, including roles of academic officers and committees. Specific faculty data are presented in Chapter 2, such as definition of academic ranks and titles, recruitment and appointment, promotion, tenure, review,…

Capability Handbook- offline metrology

DEFF Research Database (Denmark)

Islam, Aminul; Marhöfer, David Maximilian; Tosello, Guido

This offline metrological capability handbook has been made in relation to HiMicro Task 3.3. The purpose of this document is to assess the metrological capability of the HiMicro partners and to gather the information of all available metrological instruments in the one single document. It provides...

Humane Education Projects Handbook.

Science.gov (United States)

Junior League of Ogden, UT.

This handbook was developed to promote interest in humane education and to encourage the adoption of humane education projects. Although specifically designed to assist Junior Leagues in developing such projects, the content should prove valuable to animal welfare organizations, zoos, aquariums, nature centers, and other project-oriented groups…

Girls Physical Education Handbook.

Science.gov (United States)

Fairfax County Schools, VA.

This handbook was designed to provide the student with basic information for various individual, dual, and team sports. The individual and dual sports which are discussed include archery, badminton, creative dance, fencing, golf, gymnastics, and games such as deck tennis, table tennis, horseshoes, and shuffledboard. Basketball, field hockey,…

Risk assessment handbook

International Nuclear Information System (INIS)

Farmer, F.G.; Jones, J.L.; Hunt, R.N.; Roush, M.L.; Wierman, T.E.

1990-09-01

The Probabilistic Risk Assessment Unit at EG ampersand G Idaho has developed this handbook to provide guidance to a facility manager exploring the potential benefit to be gained by performance of a risk assessment properly scoped to meet local needs. This document is designed to help the manager control the resources expended commensurate with the risks being managed and to assure that the products can be used programmatically to support future needs in order to derive maximum beneflt from the resources expended. We present a logical and functional mapping scheme between several discrete phases of project definition to ensure that a potential customer, working with an analyst, is able to define the areas of interest and that appropriate methods are employed in the analysis. In addition the handbook is written to provide a high-level perspective for the analyst. Previously, the needed information was either scattered or existed only in the minds of experienced analysts. By compiling this information and exploring the breadth of knowledge which exists within the members of the PRA Unit, the functional relationships between the customers' needs and the product have been established

Renewable energy handbook

Energy Technology Data Exchange (ETDEWEB)

Fine, R

1976-01-01

The potential for renewable energy use in Canada is examined. It is pointed out that Canada can choose to begin to diversify its energy supply now, moving rapidly and smoothly towards an efficient energy society based on renewable energy sources; or, it can continue on its present course and face the possibility of being forced by necessity to make a later transition to renewable sources, probably with a great deal of economic and political disruption. The handbook begins with a discussion on major issues and options available. This second section deals with the technology, applications, and costs of direct solar energy utilization, solar thermal electricity generation, photovoltaic conversion, wind energy, biomass energy, tidal power, wave energy, ocean thermal energy, geothermal energy, heat pumps, and energy storage. Section three discusses how renewable energy might realistically supply Canada's energy requirements within a reasonable period of time. Some issues on how government, industry, and the individual may become involved to make this happen are suggested. A list of resource people and renewable energy businesses is provided in the last section. A recommended reading list and bibliography complete the handbook. (MCW)

Nanobiomaterials handbook

CERN Document Server

Sitharaman, Balaji

2011-01-01

Nanobiomaterials exhibit distinctive characteristics, including mechanical, electrical, and optical properties, which make them suitable for a variety of biological applications. Because of their versatility, they are poised to play a central role in nanobiotechnology and make significant contributions to biomedical research and healthcare. Nanobiomaterials Handbook provides a comprehensive overview of the field, offering a broad introduction for those new to the subject as well as a useful reference for advanced professionals.Analyzing major topics and disciplines in this arena, this volume:

Handbook of Basic Tables for Chemical Analysis. Final report

International Nuclear Information System (INIS)

Bruno, T.J.; Svoronos, P.D.N.

1988-04-01

This work began as a slim booklet prepared by one of the authors (TJB) to accompany a course on chemical instrumentation presented at the National Bureau of Standards, Boulder Laboratories. The booklet contained tables on chromatography, spectroscopy, and chemical (wet) methods, and was intended to provide the students with enough basic data to design their own analytical methods and procedures. Shortly thereafter, with the co-authorship of Prof. Paris D. N. Svoronos, it was expanded into a more-extensive compilation entitled Basic Tables for Chemical Analysis, published as National Bureau of Standards Technical Note 1096. That work has now been expanded and updated into the present body of tables. Although there have been considerable changes since the first version of these tables, the aim has remained essentially the same. The authors have tried to provide a single source of information for those practicing scientists and research students who must use various aspects of chemical analysis in their work. In this respect, it is geared less toward the researcher in analytical chemistry than to those practitioners in other chemical disciplines who must have routine use of chemical analysis

The response of local residents to a chemical hazard warning: Prediction of behavioral intentions in France, Greece and the Netherlands

NARCIS (Netherlands)

Wiegman, O.; Komilis, Egli; Cadet, Bernard; Boer, Hendrik; Gutteling, Jan M.

1993-01-01

In this study Greek, French and Dutch residents of a hazardous chemical complex were confronted with a simulated warning scenario for an industrial accident and intended functional and dysfunctional behaviours were measured. Intended functional behaviours were poorly predicted by our model, while

Ewe (for Togo): Communication and Culture Handbook. Peace Corps Language Handbook Series.

Science.gov (United States)

Kozelka, Paul R.

This handbook, concerning the Ewe language and culture of Togo, presents classroom activities that require the learner to exchange messages in a way that is appropriate to the cultural context. These activities are presented in 30 lessons containing both basic and supplementary material that deal with situations and topics which will be useful to…

Copyright for librarians the essential handbook

CERN Document Server

Berkman Center for Internet and Society

2012-01-01

"Copyright for Librarians" (CFL) is an online open curriculum on copyright law that was developed jointly with Harvard’s Berkman Center for Internet and Society. Re-designed as a brand new textbook, "Copyright for Librarians: the essential handbook" can be used as a stand-alone resource or as an adjunct to the online version which contains additional links and references for students who wish to pursue any topic in greater depth. Delve into copyright theory or explore enforcement. With a new index and a handy Glossary, the Handbook is essential reading for librarians who want to hone their skills in 2013, and for anyone learning about or teaching copyright law in the information field.

NASA Accident Precursor Analysis Handbook, Version 1.0

Science.gov (United States)

Groen, Frank; Everett, Chris; Hall, Anthony; Insley, Scott

2011-01-01

Catastrophic accidents are usually preceded by precursory events that, although observable, are not recognized as harbingers of a tragedy until after the fact. In the nuclear industry, the Three Mile Island accident was preceded by at least two events portending the potential for severe consequences from an underappreciated causal mechanism. Anomalies whose failure mechanisms were integral to the losses of Space Transportation Systems (STS) Challenger and Columbia had been occurring within the STS fleet prior to those accidents. Both the Rogers Commission Report and the Columbia Accident Investigation Board report found that processes in place at the time did not respond to the prior anomalies in a way that shed light on their true risk implications. This includes the concern that, in the words of the NASA Aerospace Safety Advisory Panel (ASAP), "no process addresses the need to update a hazard analysis when anomalies occur" At a broader level, the ASAP noted in 2007 that NASA "could better gauge the likelihood of losses by developing leading indicators, rather than continue to depend on lagging indicators". These observations suggest a need to revalidate prior assumptions and conclusions of existing safety (and reliability) analyses, as well as to consider the potential for previously unrecognized accident scenarios, when unexpected or otherwise undesired behaviors of the system are observed. This need is also discussed in NASA's system safety handbook, which advocates a view of safety assurance as driving a program to take steps that are necessary to establish and maintain a valid and credible argument for the safety of its missions. It is the premise of this handbook that making cases for safety more experience-based allows NASA to be better informed about the safety performance of its systems, and will ultimately help it to manage safety in a more effective manner. The APA process described in this handbook provides a systematic means of analyzing candidate

Procedures and Standards Handbook. Version 3.0. What Works Clearinghouse

Science.gov (United States)

What Works Clearinghouse, 2014

2014-01-01

This "What Works Clearinghouse Procedures and Standards Handbook (Version 3.0)" provides a detailed description of the standards and procedures of the What Works Clearinghouse (WWC). The remaining chapters of this Handbook are organized to take the reader through the basic steps that the WWC uses to develop a review protocol, identify…

Maintenance and hazardous substances

NARCIS (Netherlands)

Kuhl, K.; Terwoert, J.; Cabecas, J.J.M.

2012-01-01

Maintenance workers come into close contact with a broad variety of often hazardous chemicals. Depending on the specific type, these chemicals may not only cause diseases like skin sores or cancer, but many of them are highly flammable and explosive. This e-facts focuses on the specific risks

Statistical handbook for Canada's upstream petroleum industry: '96 updates

International Nuclear Information System (INIS)

1997-01-01

The Statistical Handbook of CAPP is an annual compilation of useful information about the Canadian petroleum and natural gas industry. It has been published since 1955, and is a key source of upstream petroleum statistics. It presents a historical summary of the petroleum industry''s progress and provides detailed statistical information on the production and consumption of petroleum, petroleum products, natural gas and natural gas liquids, imports and exports, land sales, pipelines, reserves, drilling and refinery activities, and prices in Canada. The information, mostly in tabular form, is based on the latest available data (generally up to and including 1996). For the first time in 1997, the Handbook is also made available in CD-ROM format (EXCEL 5.0). Plans are also underway to publish the Handbook on a secure site on the Internet

The Population Activist's Handbook.

Science.gov (United States)

Population Inst., Washington, DC.

This handbook is a guide to effective action strategies on dealing with overpopulation. Divided into five sections, the book outlines programs, suggests references, and lists resources that are helpful for thinking and for planning action on population issues. Section one focuses on strategies to change the current population policy choices made…

Wildlife Habitat Evaluation Handbook.

Science.gov (United States)

Neilson, Edward L., Jr.; Benson, Delwin E.

The National 4-H Wildlife Invitational is a competitive event to teach youth about the fundamentals of wildlife management. Youth learn that management for wildlife means management of wildlife habitat and providing for the needs of wildlife. This handbook provides information about wildlife habitat management concepts in both urban and rural…

DOE Fundamentals Handbook: Instrumentation and Control, Volume 1

International Nuclear Information System (INIS)

1992-06-01

The Instrumentation and Control Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of instrumentation and control systems. The handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. This information will provide personnel with an understanding of the basic operation of various types of DOE nuclear facility instrumentation and control systems

DOE Fundamentals Handbook: Instrumentation and Control, Volume 1

Energy Technology Data Exchange (ETDEWEB)

1992-06-01

The Instrumentation and Control Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of instrumentation and control systems. The handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. This information will provide personnel with an understanding of the basic operation of various types of DOE nuclear facility instrumentation and control systems.

DOE Fundamentals Handbook: Instrumentation and Control, Volume 2

International Nuclear Information System (INIS)

1992-06-01

The Instrumentation and Control Fundamentals Handbook personnel, and the technical staff facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of instrumentation and control systems. The handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. This information will provide personnel with an understanding of the basic operation of various types of DOE nuclear facility instrumentation and control systems

Handbook for evaluation studies in virtual reality

DEFF Research Database (Denmark)

Livatino, Salvatore; Koeffel, Christina

2006-01-01

of human behavior including aspects of perception, action, and task-performance. The evaluation issue calls for multi- and interdisciplinary research activities, where technical expertise is combined with humanistic knowledge and methodology. Several experts in the field of VR as well as in the field...... in evaluation studies as well as students. The aim is also to facilitate multi-disciplinary activities through the use of an evaluation handbook which would be simple and focused on VR. The applicability of this guideline has been tested in two pilot studies, which showed how this handbook could successfully...... be employed to carry out pilot (and formal) evaluations....

Environmental regulations handbook for enhanced oil recovery

International Nuclear Information System (INIS)

Madden, M.P.; Blatchford, R.P.; Spears, R.B.

1991-12-01

This handbook is intended to assist owners and operators of enhanced oil recovery (EOR) operations in acquiring some introductory knowledge of the various state agencies, the US Environmental Protection Agency, and the many environmental laws, rules and regulations which can have jurisdiction over their permitting and compliance activities. It is a compendium of summarizations of environmental rules. It is not intended to give readers specific working details of what is required from them, nor can it be used in that manner. Readers of this handbook are encouraged to contact environmental control offices nearest to locations of interest for current regulations affecting them

Environmental regulations handbook for enhanced oil recovery

Energy Technology Data Exchange (ETDEWEB)

Madden, M.P. [National Inst. for Petroleum and Energy Research, Bartlesville, OK (United States); Blatchford, R.P.; Spears, R.B. [Spears and Associates, Inc., Tulsa, OK (United States)

1991-12-01

This handbook is intended to assist owners and operators of enhanced oil recovery (EOR) operations in acquiring some introductory knowledge of the various state agencies, the US Environmental Protection Agency, and the many environmental laws, rules and regulations which can have jurisdiction over their permitting and compliance activities. It is a compendium of summarizations of environmental rules. It is not intended to give readers specific working details of what is required from them, nor can it be used in that manner. Readers of this handbook are encouraged to contact environmental control offices nearest to locations of interest for current regulations affecting them.

Oracle BAM 11gR1 Handbook

CERN Document Server

Wang, Pete

2012-01-01

"Oracle BAM 11gR1 Handbook" is a practical best practices tutorial focused entirely on Oracle Business Activity Monitoring. An intermediate-to-advanced guide, step-by-step instructions and an accompanying demo project will help SOA report developers through application development and producing dashboards and reports. If you are a developer/report developer or SOA Architect who wants to learn valuable Oracle BAM best practices for monitoring your operations in real time, then "Oracle BAM 11gR1 Handbook" is for you. Administrators will also find the book useful. You should already be comfortabl

Handbook of asynchronous machines with variable speed

CERN Document Server

Razik, Hubert

2013-01-01

This handbook deals with the asynchronous machine in its close environment. It was born from a reflection on this electromagnetic converter whose integration in industrial environments takes a wide part. Previously this type of motor operated at fixed speed, from now on it has been integrated more and more in processes at variable speed. For this reason it seemed useful, or necessary, to write a handbook on the various aspects from the motor in itself, via the control and while finishing by the diagnosis aspect. Indeed, an asynchronous motor is used nowadays in industry where variation speed a

Handbook of social network technologies and applications

CERN Document Server

Furht, Borko

2010-01-01

Social networking is a concept that has existed for a long time; however, with the explosion of the Internet, social networking has become a tool for people to connect and communicate in ways that were impossible in the past. The recent development of Web 2.0 has provided many new applications, such as Myspace, Facebook, and LinkedIn. The purpose of ""Handbook of Social Networks: Technologies and Applications"" is to provide comprehensive guidelines on the current and future trends in social network technologies and applications in the field of Web-based Social Networks. This handbook includes