WorldWideScience

Sample records for haynes stellite 6b

  1. Friction surfaced Stellite6 coatings

    International Nuclear Information System (INIS)

    Rao, K. Prasad; Damodaram, R.; Rafi, H. Khalid; Ram, G.D. Janaki; Reddy, G. Madhusudhan; Nagalakshmi, R.

    2012-01-01

    Solid state Stellite6 coatings were deposited on steel substrate by friction surfacing and compared with Stellite6 cast rod and coatings deposited by gas tungsten arc and plasma transferred arc welding processes. Friction surfaced coatings exhibited finer and uniformly distributed carbides and were characterized by the absence of solidification structure and compositional homogeneity compared to cast rod, gas tungsten arc and plasma transferred coatings. Friction surfaced coating showed relatively higher hardness. X-ray diffraction of samples showed only face centered cubic Co peaks while cold worked coating showed hexagonally close packed Co also. - Highlights: ► Stellite6 used as coating material for friction surfacing. ► Friction surfaced (FS) coatings compared with casting, GTA and PTA processes. ► Finer and uniformly distributed carbides in friction surfaced coatings. ► Absence of melting results compositional homogeneity in FS Stellite6 coatings.

  2. The Basics of Stellites in Machining Perspective

    Directory of Open Access Journals (Sweden)

    Md Shahanur Hasan

    2016-12-01

    Full Text Available Stellites are cobalt (Co-based superalloys available in two main combinations: (a a Tungsten (W group with composition of Co-Cr-W-C, and (b a Molybdenum (Mo group containing Co-Cr-Mo-C. Stellites possess outstanding corrosion resistance, oxidation resistance, wear resistance, heat resistance, and low magnetic permeability. Components made of stellites work well in highly corrosive environments and maintain these advantageous properties at elevated temperatures. Components made of stellites are widely used in the oil and gas, automotive, nuclear power, paper and pulp, chemical and petrochemical, refineries, automobile, aerospace and aircraft industries. By virtue of their nonmagnetic, anticorrosive and non-reactivity to human body-fluid properties, stellites are used in medical surgery and in surgical tools, tooth and bone implants and replacements, heart valves, and in heart pacemakers. The hardness range of stellites is from 32 to 55 HRC, which makes stellites brittle materials but they have a low Young’s modulus. Due to their high hardness, dense but non-homogeneous molecular structure and lower thermal conductivity, machining operations for parts made of stellites are extremely difficult, categorising stellites as difficult-to-machine materials like Ti-alloys, inconels, composites and stainless steels. Usually, machine components made of stellites are produced by a deposition method onto steel substrates instead of expensive solid stellite bars. The rough surfaces of deposited stellites are then finished by grinding, rather than some other economic machining process, which is costly and time-consuming, making stellite products very expensive. This paper provides a basic overview of stellites applicable in engineering, their significances and specific applications, advantages and disadvantages in respect of machining processes. A brief review on experimental research on economically rational cutting parameters for turning operations of

  3. Machinability of Stellite 6 hardfacing

    Directory of Open Access Journals (Sweden)

    Dudzinski D.

    2010-06-01

    Full Text Available This paper reports some experimental findings concerning the machinability at high cutting speed of nickel-base weld-deposited hardfacings for the manufacture of hot tooling. The forging work involves extreme impacts, forces, stresses and temperatures. Thus, mould dies must be extremely resistant. The aim of the project is to create a rapid prototyping process answering to forging conditions integrating a Stellite 6 hardfacing deposed PTA process. This study talks about the dry machining of the hardfacing, using a two tips machining tool and a high speed milling machine equipped by a power consumption recorder Wattpilote. The aim is to show the machinability of the hardfacing, measuring the power and the tip wear by optical microscope and white light interferometer, using different strategies and cutting conditions.

  4. Haynes, Ray oral history interviews

    OpenAIRE

    Interviewee: Haynes, Ray; Interviewer: Walliser, Andrea; Interviewer: Bauder, Ken; Principal Investigator: Hall, Peter V

    2013-01-01

    Ray Haynes is a former president of the BC Federation of Labour. As a young man Haynes worked at Hudson’s Bay Company Wholesale, a division of the Hudson’s Bay Company, where he reported earning a low wage and working in poor conditions. He then worked at Canadian White Pine sawmill where he learned about labour and other social issues from union members who were communist, Leninist, and Trotskyist. He worked at White Pine for only 18 months even though he was earning a high wage. Haynes told...

  5. Self-welding evaluation of stellite 6 and stellite 156 in flowing sodium

    International Nuclear Information System (INIS)

    Chang, J.Y.; Schrock, S.L.; Johnson, R.N.

    1977-01-01

    The self-welding behavior of two similar materials, Stellite 6 and Stellite 156, in sodium are discussed. The materials were tested at temperatures from 850 to 1140 0 F for time periods up to six-months while immersed in flowing sodium. Contact stresses ranged from 6000 psi to 16,000 psi on contact areas from 0.35 to 0.47 square inches. All separation tests to determine the extent of self-welding were conducted in a tensile mode. The surface morphologies of the samples before and after each test were measured. At temperatures of 1115 0 F and above, almost all the Stellite 6 specimens indicated a significant tendency toward self-welding within a relatively short period of time (one week). Stellite 156 couples also developed a strong self-weld bond at 1060 0 F after six-month exposure

  6. Radiation-induced corrosion of stellite-6

    International Nuclear Information System (INIS)

    Behazin, M.; Wren, J.C.

    2012-09-01

    Stellite-6 is a Co-based (58%) alloy that is used for components that require high wear-resistance, such as valve facings and ball bearings in nuclear reactors. In the reactor core, stable 59 Co can be neutron activated by absorption of a neutron to become the radioactive isotope, 60 Co. The 60 Co that is created constitutes a safety hazard for plant workers who have to perform maintenance on the reactor. One of the operational and safety issues in a nuclear reactor is the potential corrosion of Co-based alloys and the introduction of dissolved Co ions into the reactor core. While the corrosion of Stellite-6 has been studied its corrosion behaviour with ionizing radiation present has not been well established. Corrosion kinetics depend on both the aqueous redox conditions and the physical and chemical nature of the alloy surface. The high radiation fields present in a reactor core will cause water to decompose to a range of redox-active species (both highly oxidizing (e.g., ·OH, H 2 O 2 ) and highly reducing (e.g., ·eaq - , ·O 2 - )). These species can significantly influence corrosion kinetics. The effect of γ-radiation on the corrosion of Stellite-6 at pH 10.6 was investigated at temperatures ≤ 150 deg. C. Since the corrosion rate depends strongly on the type of oxide that is present on the material surface, the focus of this corrosion study was to establish the mechanism by which radiolysis affects the nature of the oxide that is present on Stellite-6. The results show that γ-radiation (at a dose rate of 5.5 kGy.h -1 ) increases the corrosion potential on Stellite-6 from -0.7 VSCE to 0.12 VSCE . The corrosion potential without irradiation present is in a potential range where oxidation is limited to the formation of a Co (OH) 2 and CoCr 2 O 4 outer oxide layer on a pre-existing Cr 2 O 3 film. The corrosion potential with irradiation is in a potential range where further oxidation of Co (OH) 2 to CoOOH also occurs. However, since CoOOH is less soluble than

  7. Status of Stellite 6 friction testing

    International Nuclear Information System (INIS)

    Watkins, J.C.; DeWall, K.G.

    1998-01-01

    For the past several years, researchers at the Idaho National Engineering and Environmental Laboratory, under the sponsorship of the US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, have been investigating the performance of motor-operated valves subjected to design basis flow and pressure loads. Part of this research addresses the friction that occurs at the interface between the valve disc and the valve body seats during operation of a gate valve. In most gate valves, these surfaces are hardfaced with Stellite 6, a cobalt-based alloy. Analytical methods exist for predicting the thrust needed to operate these valves at specific pressure conditions. To produce accurate valve thrust predictions, the analyst must have a reasonably accurate, though conservative, estimate of the coefficient of friction at the disc-to-seat interface. One of the questions that remains to be answered is whether, and to what extent, aging of the disc and seat surfaces effects the disc-to-seat coefficient of friction. Specifically, does the environment in a nuclear plants piping system cause the accumulation of an oxide film on these surfaces that increases the coefficient of friction; and if so, how great is the increase? This paper presents results of specimen tests addressing this issue, with emphasis on the following: (1) the characteristics and thickness of the oxide film that develops on Stellite 6 as it ages; (2) the change in the friction coefficient of Stellite 6 as it ages, including the question of whether the friction coefficient eventually reaches a plateau; and (3) the effect in-service cycling has on the characteristics and thickness of the oxide film and on the friction coefficient

  8. Source term reduction at DAEC (including stellite ball recycling)

    International Nuclear Information System (INIS)

    Smith, R.; Schebler, D.

    1995-01-01

    The Duane Arnold Energy Center was seeking methods to reduce dose rates from the drywell due to Co-60. Duane Arnold is known in the industry to have one of the highest drywell dose rates from the industry standardized 'BRAC' point survey. A prime method to reduce dose rates due to Co-60 is the accelerated replacement of stellite pins and rollers in control rod blades due to their high stellite (cobalt) content. Usually the cobalt content in alloys of stellite is greater than 60% cobalt by weight. During the RFO-12 refueling outage at Duane Arnold, all of the remaining cobalt bearing control rod blades were replaced and new stellite free control rod blades were installed in the core. This left Duane Arnold with the disposal of highly radioactive stellite pins and rollers. The processing of control rod blades for disposal is a very difficult evolution. First, the velocity limiter (a bottom portion of the component) and the highly radioactive upper stellite control rod blade ins and rollers are separated from the control rod blade. Next, the remainder of the control rod blade is processed (chopped and/or crushed) to aid packaging the waste for disposal. The stellite bearings are then often carefully placed in with the rest of the waste in a burial liner to provide shielding for disposal or more often are left as 'orphans' in the spent fuel pool because their high specific activity create shipping and packaging problems. Further investigation by the utility showed that the stellite balls and pins could be recycled to a source manufacturer rather than disposed of in a low-level burial site. The cost savings to the utility was on the order of $200,000 with a gross savings of $400,000 in savings in burial site charges. A second advantage of the recycling of the stellite pins and rollers was a reduction in control in radioactive waste shipments

  9. Kepler-6b

    DEFF Research Database (Denmark)

    Dunham..[], Edward W.; Borucki, W. J.; Koch, D. G.

    2010-01-01

    We announce the discovery of Kepler-6b, a transiting hot Jupiter orbiting a star with unusually high metallicity, . The planet's mass is about 2/3 that of Jupiter, M P = 0.67 M J, and the radius is 30% larger than that of Jupiter, R P = 1.32 R J, resulting in a density of ¿P = 0.35 g cm–3, a fairly...

  10. Dynamic strain aging in Haynes 282 superalloy

    Directory of Open Access Journals (Sweden)

    Hörnqvist Magnus

    2014-01-01

    Full Text Available Haynes 282 is a newly introduced Ni-based superallony, developed to provide a combination of high-temperature mechanical properties, thermal stability and processability. The present contribution investigates the effect of dynamic strain aging (DSA on the deformation behaviour of Haynes 282 during monotonic and cyclic loading. It is shown that DSA (presumably related to carbon diffusion based on rough estimates of the activation energy completely dominates the development of the stress during cycling at intermediate temperatures, leading to extensive cyclic hardening and serrated yielding. However, no clear effects on the fatigue life or the resulting dislocation structure could be observed. The tensile properties were not severely affected, in spite of the presence of extensive serrated yielding, although a reduction in ductility was observed in the DSA temperature regime. During monotonic loading at lower strain rates indications of an additional DSA mechanism due to substitutional elements were observed.

  11. Fabrication and Tests of M240 Machine Gun Barrels Lined with Stellite 25

    Science.gov (United States)

    2016-04-01

    ARL-TR-7662 ● APR 2016 US Army Research Laboratory Fabrication and Tests of M240 Machine Gun Barrels Lined with Stellite 25...Fabrication and Tests of M240 Machine Gun Barrels Lined with Stellite 25 by William S de Rosset and Sean Fudger Weapons and Materials Research...

  12. Influence of laser irradiation on deposition characteristics of cold sprayed Stellite-6 coatings

    Science.gov (United States)

    Li, Bo; Jin, Yan; Yao, Jianhua; Li, Zhihong; Zhang, Qunli; Zhang, Xin

    2018-03-01

    Depositing hard materials such as Stellite-6 solely by cold spray (CS) is challengeable due to limited ability of plastic deformation. In this study, the deposition of Stellite-6 powder was achieved by supersonic laser deposition (SLD) which combines CS with synchronous laser irradiation. The surface morphology, deposition efficiency, track shape of Stellite-6 coatings produced over a range of laser irradiation temperatures were examined so as to reveal the effects of varying laser energy inputting on the deposition process of high strength material. The microstructure, phase composition and wear/corrosion resistant properties of the as-deposited Stellite-6 coatings were also investigated. The experimental results demonstrate that the surface flatness and deposition efficiency increase with laser irradiation temperature due to the softening effect induced by laser heating. The as-deposited Stellite-6 tracks show asymmetric shapes which are influenced by the relative configuration of powder stream and laser beam. The SLD coatings can preserve the original microstructure and phase of the feedstock material due to relatively low laser energy inputting, which result in the superior wear/corrosion resistant properties as compared to the counterpart prepared by laser cladding.

  13. Failure Mechanism of a Stellite Coating on Heat-Resistant Steel

    Science.gov (United States)

    Wang, Dong; Zhao, Haixing; Wang, Huang; Li, Yuyan; Liu, Xia; He, Guo

    2017-09-01

    The Stellite 21 coating on the heat-resistant steel X12CrMoWVNbN10-1-1 (so-called COSTE) used in a steam turbine valve was found to be fatigue broken after service at around 873 K (600 °C) for about 8 years. In order to investigate the failure mechanism, a fresh Stellite 21 coating was also prepared on the same COSTE steel substrate by using the similar deposition parameters for comparison. It was found that the Stellite 21 coating was significantly diluted by the steel, resulting in a thin Fe-rich layer in the coating close to the fusion line. Such high Fe concentration together with the incessant Fe diffusion from the steel substrate to the coating during the service condition (about 873 K (600 °C) for long time) induced the eutectoid decomposition of the fcc α-Co(Fe,Cr,Mo) solid solution, forming an irregular eutectoid microstructure that was composed of the primitive cubic α'-FeCo(Cr,Mo) phase and the tetragonal σ-CrCo(Fe,Mo) phase. The brittle nature of such α'/ σ eutectoid microstructure contributed to the fatigue fracture of the Stellite 21 coating, resulting in an intergranular rupture mode.

  14. Evaluation of a process for the decontamination of radioactive hotspots due to activated stellite particles

    International Nuclear Information System (INIS)

    Subramanian, Veena; Chandramohan, Palogi; Chandran, Sinu; Srinivasan, Madapusi P.; Rangarajan, Srinivasan; Velmurugan, Sankaralingam; Narasimhan, Sevilmedu V.

    2011-01-01

    Some of the Indian pressurized heavy water reactors (PHWRs) which use Stellite balls in the ball and screw mechanism of the adjustor rod drive mechanism in the moderator circuit have encountered high radiation fields in the moderator system due to 60 Co. Release of particulate Stellite is responsible for the hotspots in addition to the general uniform contamination of internal surfaces with 60 Co. Extensive laboratory studies have shown that it is possible to dissolve these Stellite particles by adopting a three-step redox process with permanganic acid as the oxidizing agent. These investigations with inactive Stellite in powder form helped to optimize the process conditions. Permanganic acid was found to have the highest dissolution efficiency as compared to alkaline and nitric acid permanganate. The susceptibility of Stellite to corrode or dissolve was found to depend on the concentration of the permanganate, pH and temperature of the process and microstructure of the Stellite alloy. This process was evaluated for its effectiveness on components from nuclear power plants. Component decontamination was carried out on adjustor rod drive assemblies which had 60 Co activity due to Stellite particles with the radiation field ranging from 3 R . h -1 to 20 R . h -1 . They were subjected to decontamination with permanganic acid as the oxidizing agent, followed by citric acid and a solution containing ethylenediaminetetraacetic acid, ascorbic acid and citric acid in a 4:3:3 ratio by weight as the reducing formulation. In the first trial, one adjustor rod drive mechanism was subjected to decontamination. After two cycles of treatment, an average decontamination factor (DF) of 6.8, with a maximum DF of 11.7, was achieved. The same process but with one cycle was repeated on eight more adjustor rod drive mechanisms. 60 Co activity in the range of 13-93 mCi was removed from these adjustor rods. Loose contamination of the order of 30 000-40 000 decays per min and cm 2 observed

  15. Evaluation of a process for the decontamination of radioactive hotspots due to activated stellite particles

    Energy Technology Data Exchange (ETDEWEB)

    Subramanian, Veena; Chandramohan, Palogi; Chandran, Sinu; Srinivasan, Madapusi P.; Rangarajan, Srinivasan; Velmurugan, Sankaralingam; Narasimhan, Sevilmedu V. [BARC Facilities, Kalpakkam, Tamil Nadu (India). Water and Steam Chemistry Div.

    2011-06-15

    Some of the Indian pressurized heavy water reactors (PHWRs) which use Stellite balls in the ball and screw mechanism of the adjustor rod drive mechanism in the moderator circuit have encountered high radiation fields in the moderator system due to {sup 60}Co. Release of particulate Stellite is responsible for the hotspots in addition to the general uniform contamination of internal surfaces with {sup 60}Co. Extensive laboratory studies have shown that it is possible to dissolve these Stellite particles by adopting a three-step redox process with permanganic acid as the oxidizing agent. These investigations with inactive Stellite in powder form helped to optimize the process conditions. Permanganic acid was found to have the highest dissolution efficiency as compared to alkaline and nitric acid permanganate. The susceptibility of Stellite to corrode or dissolve was found to depend on the concentration of the permanganate, pH and temperature of the process and microstructure of the Stellite alloy. This process was evaluated for its effectiveness on components from nuclear power plants. Component decontamination was carried out on adjustor rod drive assemblies which had {sup 60}Co activity due to Stellite particles with the radiation field ranging from 3 R . h{sup -1} to 20 R . h{sup -1}. They were subjected to decontamination with permanganic acid as the oxidizing agent, followed by citric acid and a solution containing ethylenediaminetetraacetic acid, ascorbic acid and citric acid in a 4:3:3 ratio by weight as the reducing formulation. In the first trial, one adjustor rod drive mechanism was subjected to decontamination. After two cycles of treatment, an average decontamination factor (DF) of 6.8, with a maximum DF of 11.7, was achieved. The same process but with one cycle was repeated on eight more adjustor rod drive mechanisms. {sup 60}Co activity in the range of 13-93 mCi was removed from these adjustor rods. Loose contamination of the order of 30 000-40 000

  16. The effect of conditioning by permanganate on the dissolution behavior of stellite particles in organic complexing acid medium

    International Nuclear Information System (INIS)

    Subramanian, V.; Chandramohan, P.; Srinivasan, M.P.; Sukumar, A.A.; Raju, V.S.; Velmurugan, S.; Narasimhan, S.V.

    2004-01-01

    Radioactive hotspots found either in the primary heat transport circuit or auxiliary circuits of nuclear reactors are mainly due to particles containing activated cobalt. The main source of these particles are stellite alloys that are rich in cobalt and are used in primary cooling circuits in valves, pumps, etc. Due to either mechanical erosion or erosion coupled with corrosion under flow conditions (known as tribocorrosion), these stellite particles are released into the system. They are then activated by neutron absorption in the reactor core before being deposited on out-of-core surfaces, causing radiation exposure problems. In this paper, the possibility of dissolving stellite particles by using an oxidation-complexation process has been explored. Permanganate based reagents were evaluated for their efficiency in conditioning the stellite particles for their dissolution with organic acids. Permanganic acid was found to be the superior conditioning agent. Two alloys of stellite, viz. stellites no. 3 and no. 6, were studied with respect to their dissolution behavior

  17. Evaluation of a process for the decontamination of radioactive hotspots due to activated stellite particles

    International Nuclear Information System (INIS)

    Subramanian, V.; Chandramohan, P.; Srinivasan, M.P.; Rangarajan, S.; Velmurugan, S.; Narasimhan, S.V.; Khandelwal, R.C.

    2010-01-01

    Some of the Indian PHWRs which used stellite balls in the ball and screw mechanism of the adjustor rod drive mechanism in the moderator circuit encountered high radiation field in moderator system due to 60 Co. Release of particulate stellite was responsible for the hotspots besides the general uniform contamination of internal surfaces with 60 Co. Extensive laboratory studies have shown that it is possible to dissolve these stellite particles by adopting a three step redox process with permanganic acid as the oxidizing agent. These investigations with inactive stellite in powder form helped to optimize the process conditions. Permanganic acid was found to have the highest dissolution efficiency as compared to alkaline and nitric acid permanganate. The concentration of the permanganate was also found to be an important factor in deciding the efficiency of the dissolution of stellite. The efficiency of dissolution as a function of permanganic acid concentration showed a maximum. This process was evaluated for its effectiveness on components from nuclear power plants. Component decontamination was carried out on adjustor rod drive assemblies which had 60 Co activity due to stellite particles with the radiation field ranging from 3 R/h to 20 R/h. They were subjected to decontamination with permanganic acid as oxidizing agent, followed by citric acid and a solution containing EDTA, ascorbic acid and citric acid in 4:3:3 ratio by weight (EAC) as reducing formulations. A test rig was fabricated for this purpose. In the first trial, one adjustor rod drive mechanism was subjected to decontamination. After two cycles of treatment, an average decontamination factor (DF) of 6.8, with a maximum DF of 11.7 was achieved. The same process but one cycle was repeated on eight more adjustor rod drive mechanisms. 60 Co activity in the range of 13 - 93 mCi was removed from these adjustor rods. Loose contamination of the order of 30000 - 40000 dpm/cm 2 observed before decontamination

  18. Evaluation of a process for the decontamination of radioactive hotspots due to activated stellite particles

    Energy Technology Data Exchange (ETDEWEB)

    Subramanian, V.; Chandramohan, P.; Srinivasan, M.P.; Rangarajan, S.; Velmurugan, S.; Narasimhan, S.V., E-mail: svn@igcar.gov.in [BARC Facilities, Water and Steam Chemistry Div., Kalpakkam, Tamilnadu (India); Khandelwal, R.C. [Kakrapara Atomic Power Station, KAPS, Surat, Gujarat (India)

    2010-07-01

    Some of the Indian PHWRs which used stellite balls in the ball and screw mechanism of the adjustor rod drive mechanism in the moderator circuit encountered high radiation field in moderator system due to {sup 60}Co. Release of particulate stellite was responsible for the hotspots besides the general uniform contamination of internal surfaces with {sup 60}Co. Extensive laboratory studies have shown that it is possible to dissolve these stellite particles by adopting a three step redox process with permanganic acid as the oxidizing agent. These investigations with inactive stellite in powder form helped to optimize the process conditions. Permanganic acid was found to have the highest dissolution efficiency as compared to alkaline and nitric acid permanganate. The concentration of the permanganate was also found to be an important factor in deciding the efficiency of the dissolution of stellite. The efficiency of dissolution as a function of permanganic acid concentration showed a maximum. This process was evaluated for its effectiveness on components from nuclear power plants. Component decontamination was carried out on adjustor rod drive assemblies which had {sup 60}Co activity due to stellite particles with the radiation field ranging from 3 R/h to 20 R/h. They were subjected to decontamination with permanganic acid as oxidizing agent, followed by citric acid and a solution containing EDTA, ascorbic acid and citric acid in 4:3:3 ratio by weight (EAC) as reducing formulations. A test rig was fabricated for this purpose. In the first trial, one adjustor rod drive mechanism was subjected to decontamination. After two cycles of treatment, an average decontamination factor (DF) of 6.8, with a maximum DF of 11.7 was achieved. The same process but one cycle was repeated on eight more adjustor rod drive mechanisms. {sup 60}Co activity in the range of 13 - 93 mCi was removed from these adjustor rods. Loose contamination of the order of 30000 - 40000 dpm/cm{sup 2} observed

  19. Composition and Antimicrobial Activity of Euphrasia rostkoviana Hayne Essential Oil

    OpenAIRE

    Novy, Pavel; Davidova, Hana; Serrano-Rojero, Cecilia Suqued; Rondevaldova, Johana; Pulkrabek, Josef; Kokoska, Ladislav

    2015-01-01

    Eyebright, Euphrasia rostkoviana Hayne (Scrophulariaceae), is a medicinal plant traditionally used in Europe for the treatment of various health disorders, especially as eyewash to treat eye ailments such as conjunctivitis and blepharitis that can be associated with bacterial infections. Some Euphrasia species have been previously reported to contain essential oil. However, the composition and bioactivity of E. rostkoviana oil are unknown. Therefore, in this study, we investigated the chemica...

  20. Rheology of StelliteTM 21 Alloy in Semi-Solid State

    Directory of Open Access Journals (Sweden)

    Sołek K.

    2016-12-01

    Full Text Available The main objective of this study was to conduct an analysis of the rheological properties of StelliteTM 21 alloy in the semi-solid state, as the results could be used for identifying the appropriate temperature range for thixoforming of this alloy, and a secondary objective of the experimental work was the development of mathematical model of the alloy’s apparent viscosity. Such viscosity models are necessary for numerical simulations of the thixoforming processes. The StelliteTM 21 alloy exhibits high hardness and thus shaping in the semi-solid state is promising route of production of parts from this alloy. Within the confines of experimental work the measurement methods of the rheological properties at high temperatures was developed. They are based on the use of specially designed viscometer equipped with high temperature furnace.

  1. Microstructure and sliding wear properties of HVOF sprayed, laser remelted and laser clad Stellite 6 coatings

    Czech Academy of Sciences Publication Activity Database

    Houdková, Š.; Pala, Zdeněk; Smazalová, E.; Vostřák, M.; Česánek, Z.

    2017-01-01

    Roč. 318, May (2017), s. 129-141 ISSN 0257-8972. [International Meeting on Thermal Spraying (RIPT)/7./. Limoges, 09.12.2015-11.12.2015] Institutional support: RVO:61389021 Keywords : Stellite 6 * HVOF * Laser remelting * Laser clad * Wear * Phase transformation Subject RIV: JK - Corrosion ; Surface Treatment of Materials OBOR OECD: Coating and films Impact factor: 2.589, year: 2016 http://www.sciencedirect.com/science/ article /pii/S0257897216308817

  2. Cavitation Erosion of Electro Spark Deposited Nitinol vs. Stellite Alloy on Stainless Steel Substrate

    Science.gov (United States)

    2015-07-15

    lower proportion of carbon. The lower carbon content of SS-316L allows lower carbide precipitation for welding . Online Metals SS-2205 Duplex ...erosion, per ASTM G32. As a comparison, a known erosion-resistant, weld -friendly alloy called Stellite 6® was ESD’d and its cavitation erosion resistance...Microscopy was conducted to examine the metallurgical bond established by the ESD process. As a comparison, a known erosion resistant, weld

  3. Critical size of defaults inducing fast fracture of deposit stellite on a valve gate

    International Nuclear Information System (INIS)

    Boneh, B.; Gilles, P.; Champomier, F.; Abisror, A.

    1986-10-01

    The present study has been made to determine if, in the case of a valve gate, transversal cracks are the result of fatigue propagation or the result of fast fracture. The author shows that only a transversal crack, with a size up to 0.7 mm, induces a fast fracture and shows also that, at equal size, a crack located under the stellite is not also injurious than a transversal crack [fr

  4. Friction and wear behavior of Colmonoy and Stellite alloys in sodium environment

    International Nuclear Information System (INIS)

    Kanoh, S.; Mizobuchi, S.; Atsumo, H.

    1976-01-01

    A description is given of a series of experiments in sodium environment for the research and development of friction and wear resistant material used for the sliding components of sodium cooled fast breeder reactor. The study relates to the friction and wear characteristics of nickel-base alloy, Colmonoy, and cobalt-base alloy, Stellite, with respect to temperature, load, sliding velocity, sliding mode, and sodium flushing. The friction behavior of these alloys in sodium is compared with that in argon

  5. Powder injection molding of Stellite 6 powder: Sintering, microstructural and mechanical properties

    International Nuclear Information System (INIS)

    Gülsoy, H. Özkan; Özgün, Özgür; Bilketay, Sezer

    2016-01-01

    The purpose of this study was to produce Co-based Stellite 6 superalloy components by using the method of Powder Injection Molding (PIM) and to characterize the microstructural and mechanical properties of the produced components. The experimental studies were started through the formation of feedstock by mixing Stellite 6 powder with a multicomponent binder system. Prepared feedstock was formed by utilizing powder injection molding technique. Then the molded samples were subjected to the solvent and thermal debinding processes. Different sintering cycles were applied to the raw components for the purpose of determining the optimum sintering conditions. The densities of the sintered components were determined in accordance with the Archimedes' principle. The microstructural characterization was performed through scanning electron microscope (SEM) analysis, energy dispersive spectrometry (EDS) analyses, and X-ray diffraction (XRD) analysis. Hardness measurement and tensile test were conducted in order to determine the mechanical properties. The results illustrated that the injection molded Stellite 6 components were composed of fine and equiaxed grains, plenty of carbide precipitates exhibiting homogenous distribution throughout the microstructure formed at the grain boundaries and thus the mechanical properties were considerably high.

  6. Étude de défaut trouvé dans des tubes centrifugés de stellite 6B

    OpenAIRE

    Villar Echeverría, Alejandro

    2014-01-01

    Les superalliages sont des alliages employés pour travailler à hautes températures tout en maintenant stabilité dimensionnelle et résistance mécanique et à la corrosion. Ils sont utilisés dans les domaines de l'aéronautique, l’industrie navale et médicale entre autres. Parmi les différents types de superalliages existants (base nickel, base cobalt et base nickel-fer), on travaillera dans cette étude avec des superalliages base cobalt. Ces alliages sont connus communément sous le nom de Stelli...

  7. Laser surface melting of 10 wt% Mo alloyed hardfacing Stellite 12 plasma transferred arc deposits: Structural evolution and high temperature wear performance

    Science.gov (United States)

    Dilawary, Shaikh Asad Ali; Motallebzadeh, Amir; Afzal, Muhammad; Atar, Erdem; Cimenoglu, Huseyin

    2018-05-01

    Laser surface melting (LSM) process has been applied on the plasma transferred arc (PTA) deposited Stellite 12 and 10 wt% Mo alloyed Stellite 12 in this study. Following the LSM process, structural and mechanical property comparison of the LSM'ed surfaces has been made. Hardness of the LSM'ed surfaces was measured as 549 HV and 623 HV for the Stellite 12 and Stellite 12 + 10 wt% Mo deposits, respectively. Despite their different hardness and structural features, the LSM'ed surfaces exhibited similar tribological performance at room temperature (RT), where fatigue wear mechanism operates. However, the wear at 500 °C promotes tribo-oxide layer formation whose composition depended on the alloying with Mo. Thus, addition of 10 wt% Mo into Stellite 12 PTA deposit has remarkably enhanced the high temperature wear performance of the LSM'ed surface as a result of participation of complex oxide (CoMoO4) in tribo-oxide layer.

  8. Optimization of pulsed TIG cladding process of stellite alloy on carbon steel using RSM

    Energy Technology Data Exchange (ETDEWEB)

    Madadi, F., E-mail: f.madadi@ma.iut.ac.ir [Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111 (Iran, Islamic Republic of); Ashrafizadeh, F. [Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111 (Iran, Islamic Republic of); Shamanian, M., E-mail: shamanian@cc.iut.ac.ir [Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111 (Iran, Islamic Republic of)

    2012-01-05

    Highlights: > This study is useful to optimize the welding process variables in order to control the heat input and cooling rates such that the hardness and dilution of the clad could be estimated. > Central composite rotatable design technique with five-level, four-factor full-factorial design matrix and mathematical models was used to predict hardness and dilution of pulsed gas tungsten arc weld cladding of stellite6 on carbon steel with high accuracy. > The welding current is an effective parameter affecting heat input and melting. In this regard, it is the most important process parameter which influences the dilution. Increase welding current leads to increase in dilution percentage and vice versa. The effect of percentage on time is less important when compared to the other factors. > The results predicted by mathematical models were close to those obtained by experiments. The confirmation tests also indicated high correlation between the mentioned values. > All of the chosen pulse GTAW parameters were significant and showed a noticeable influence on clad dilution. - Abstract: Stellite 6 is a cobalt-base alloy which is resistant to wear and corrosion and retains these properties at high temperatures. The exceptional wear resistance of Stellite 6 is mainly due to the unique inherent characteristics of the hard carbides dispersed in a Co-Cr alloy matrix. In this study, pulsed tungsten inert gas (TIG) cladding process was carried out to deposit Stellite 6 on plain carbon steel plate. The beneficial effects of this cladding process are low heat input, low distortion, controlled weld bead volume, less hot cracking tendency, less absorption of gases by weld pool and better control of the fusion zone. The dilution effect is a key issue in the quality of cladded layers and, in this regard, the pulsed current tungsten inert gas (PCTIG) was performed to decrease excess heat input and melting of substrate. This paper deals with the investigation of the hardness and

  9. Gamma Prime Stability in Haynes 282: Theoretical and Experimental Considerations

    Science.gov (United States)

    Hawk, Jeffrey A.; Cheng, Tian-Le; Sears, John S.; Jablonski, Paul D.; Wen, You-Hai

    2015-11-01

    The life cycle requirements for advanced Ni alloys are very demanding and can be on the order of several hundreds of thousands of hours. Results are presented on a wrought Ni-based superalloy designed within the nominal chemistry range of Haynes 282 with a fixed amount of γ' strengthening phase, and either low Al or Ti (within the alloy specification) to give different ratios of Ti/Al, and thus, different γ' misfit with the γ matrix. The effect that these changes have on the γ' misfit and its relevance to long-term microstructural stability is being explored both experimentally as well as with computational modeling with results through almost 10,000 h. The basics of the modeling approach are presented as are the procedures for evaluating the γ' volume fractions from transmission electron microscopy (TEM) micrographs and correcting these volume fractions for truncation error due to TEM foil thickness. Results on each alloy formulation are compared and discussed with respect to possible γ' coarsening due to the different Ti/Al ratio and what this might mean for the long-term stability of the alloy.

  10. Elevated temperature axial and torsional fatigue behavior of Haynes 188

    Science.gov (United States)

    Bonacuse, Peter J.; Kalluri, Sreeramesh

    1992-06-01

    The results of high-temperature axial and torsional low-cycle fatigue experiments performed on Haynes 188, a wrought cobalt-base superalloy, are reported. Fatigue tests were performed at 760 C in air on thin-walled tubular specimens at various ranges under strain control. Data are also presented for coefficient of thermal expansion, elastic modulus, and shear modulus at various temperatures from room to 1000 C, and monotonic and cyclic stress-strain curves in tension and in shear at 760 C. The data set is used to evaluate several multiaxial fatigue life models (most were originally developed for room temperature multiaxial life prediction) including von Mises equivalent strain range (ASME boiler and pressure vessel code), Manson-Halford, Modified Multiaxiality Factor (proposed here), Modified Smith-Watson-Topper, and Fatemi-Socie-Kurath. At von Mises equivalent strain ranges (the torsional strain range divided by the square root of 3, taking the Poisson's ratio to be 0.5), torsionally strained specimens lasted, on average, factors of 2 to 3 times longer than axially strained specimens. The Modified Multiaxiality Factor approach shows promise as a useful method of estimating torsional fatigue life from axial fatigue data at high temperatures. Several difficulties arose with the specimen geometry and extensometry used in these experiments. Cracking at extensometer probe indentations was a problem at smaller strain ranges. Also, as the largest axial and torsional strain range fatigue tests neared completion, a small amount of specimen buckling was observed.

  11. Composition and Antimicrobial Activity of Euphrasia rostkoviana Hayne Essential Oil

    Science.gov (United States)

    Novy, Pavel; Davidova, Hana; Serrano-Rojero, Cecilia Suqued; Rondevaldova, Johana; Pulkrabek, Josef

    2015-01-01

    Eyebright, Euphrasia rostkoviana Hayne (Scrophulariaceae), is a medicinal plant traditionally used in Europe for the treatment of various health disorders, especially as eyewash to treat eye ailments such as conjunctivitis and blepharitis that can be associated with bacterial infections. Some Euphrasia species have been previously reported to contain essential oil. However, the composition and bioactivity of E. rostkoviana oil are unknown. Therefore, in this study, we investigated the chemical composition and antimicrobial activity of the eyebright essential oil against some organisms associated with eye infections: Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, S. epidermidis, Pseudomonas aeruginosa, and Candida albicans. GC-MS analysis revealed more than 70 constituents, with n-hexadecanoic acid (18.47%) as the main constituent followed by thymol (7.97%), myristic acid (4.71%), linalool (4.65%), and anethole (4.09%). The essential oil showed antimicrobial effect against all organisms tested with the exception of P. aeruginosa. The best activity was observed against all Gram-positive bacteria tested with the minimum inhibitory concentrations of 512 µg/mL. This is the first report on the chemical composition of E. rostkoviana essential oil and its antimicrobial activity. PMID:26000025

  12. Composition and Antimicrobial Activity of Euphrasia rostkoviana Hayne Essential Oil.

    Science.gov (United States)

    Novy, Pavel; Davidova, Hana; Serrano-Rojero, Cecilia Suqued; Rondevaldova, Johana; Pulkrabek, Josef; Kokoska, Ladislav

    2015-01-01

    Eyebright, Euphrasia rostkoviana Hayne (Scrophulariaceae), is a medicinal plant traditionally used in Europe for the treatment of various health disorders, especially as eyewash to treat eye ailments such as conjunctivitis and blepharitis that can be associated with bacterial infections. Some Euphrasia species have been previously reported to contain essential oil. However, the composition and bioactivity of E. rostkoviana oil are unknown. Therefore, in this study, we investigated the chemical composition and antimicrobial activity of the eyebright essential oil against some organisms associated with eye infections: Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, S. epidermidis, Pseudomonas aeruginosa, and Candida albicans. GC-MS analysis revealed more than 70 constituents, with n-hexadecanoic acid (18.47%) as the main constituent followed by thymol (7.97%), myristic acid (4.71%), linalool (4.65%), and anethole (4.09%). The essential oil showed antimicrobial effect against all organisms tested with the exception of P. aeruginosa. The best activity was observed against all Gram-positive bacteria tested with the minimum inhibitory concentrations of 512 µg/mL. This is the first report on the chemical composition of E. rostkoviana essential oil and its antimicrobial activity.

  13. Composition and Antimicrobial Activity of Euphrasia rostkoviana Hayne Essential Oil

    Directory of Open Access Journals (Sweden)

    Pavel Novy

    2015-01-01

    Full Text Available Eyebright, Euphrasia rostkoviana Hayne (Scrophulariaceae, is a medicinal plant traditionally used in Europe for the treatment of various health disorders, especially as eyewash to treat eye ailments such as conjunctivitis and blepharitis that can be associated with bacterial infections. Some Euphrasia species have been previously reported to contain essential oil. However, the composition and bioactivity of E. rostkoviana oil are unknown. Therefore, in this study, we investigated the chemical composition and antimicrobial activity of the eyebright essential oil against some organisms associated with eye infections: Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, S. epidermidis, Pseudomonas aeruginosa, and Candida albicans. GC-MS analysis revealed more than 70 constituents, with n-hexadecanoic acid (18.47% as the main constituent followed by thymol (7.97%, myristic acid (4.71%, linalool (4.65%, and anethole (4.09%. The essential oil showed antimicrobial effect against all organisms tested with the exception of P. aeruginosa. The best activity was observed against all Gram-positive bacteria tested with the minimum inhibitory concentrations of 512 µg/mL. This is the first report on the chemical composition of E. rostkoviana essential oil and its antimicrobial activity.

  14. Restriction of human herpesvirus 6B replication by p53

    DEFF Research Database (Denmark)

    Øster, Bodil; Kofod-Olsen, Emil; Bundgaard, Bettina

    2008-01-01

    Human herpesvirus 6B (HHV-6B) induces significant accumulation of p53 in both the nucleus and cytoplasm during infection. Activation of p53 by DNA damage is known to induce either growth arrest or apoptosis; nevertheless, HHV-6B-infected cells are arrested in their cell cycle independently of p53...

  15. Analysis list: Kdm6b [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Kdm6b Blood,Embryo,Pluripotent stem cell + mm9 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/target/Kdm6...b.1.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/target/Kdm6b.5.tsv http://dbarc...hive.biosciencedbc.jp/kyushu-u/mm9/target/Kdm6b.10.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/colo/Kdm6...b.Blood.tsv,http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/colo/Kdm6b.Embryo.t...sv,http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/colo/Kdm6b.Pluripotent_stem_cell.tsv http://dbarchive.bios

  16. Analysis list: KDM6B [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available KDM6B Blood,Epidermis + hg19 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/target.../KDM6B.1.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/target/KDM6B.5.tsv http://dbarchive.bioscienced...bc.jp/kyushu-u/hg19/target/KDM6B.10.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/colo/KDM6B.Blood.tsv,http://dbarchive.bioscie...ncedbc.jp/kyushu-u/hg19/colo/KDM6B.Epidermis.tsv http://dbarchive.bioscience...dbc.jp/kyushu-u/hg19/colo/Blood.gml,http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/colo/Epidermis.gml ...

  17. Carbide Transformation in Haynes 230 during Long-term Exposure at High Temperature

    International Nuclear Information System (INIS)

    Lee, Ho Jung; Kim, Hyunmyung; Hong, Sunghoon; Jang, Changheui

    2014-01-01

    Long-term aging behaviors of a solid solution hardened Ni-base superalloy, Haynes 230 at high temperature have not been fully investigated yet. In this study, long-term aging tests of Haynes 230 was carried out to evaluate microstructure changes especially in carbide evolution. In addition, its consequential effects on tensile property such as tensile strength and elongation were discussed. In Haynes 230, a nucleation of the secondary carbides was dominant at 800 .deg. C ageing while growth at 900 .deg. C ageing. In addition, after aging at 800 .deg. C, transition of primary W-rich M 6 C carbides (break down) were observed and it showed high W content (up to 70 at.% W) compared to un-aged W-rich M 6 C carbides (around 30 at.% W). Coarsened Cr- and Ni-rich phase surrounded by carbide depleted region and high W-rich M 6 C carbide along the grain boundary were formed only at 900 .deg. C after long-term exposure above 10000 h. Tensile strength of aged Haynes 230 increased at 800 .deg. C while decreased at 900 .deg. C due to the formation of secondary carbide within the grains at 800 .deg. C. Decrease in elongation would be resulted from the coarsened and continuous carbides at the grain boundary as well as Cr- and Ni-rich phase along the grain boundary

  18. Microstructure and wear behavior of stellite 6 cladding on 17-4 PH stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Gholipour, A. [Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Shamanian, M., E-mail: shamanian@cc.iut.ac.ir [Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Ashrafizadeh, F. [Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of)

    2011-04-07

    Research highlights: > The microstructure of the surface layer consisted of carbides embedded in a Co-rich solid solution with dendritic structure. Primary phases formed during the process were identified as Co(FCC) and lamellar eutectic phases (M{sub 23}C{sub 6}, M{sub 6}C, Cr{sub 7}C{sub 3}). > Microhardness profiles showed that hardness increases from interface to the coating surface. This is due to the finer size of the grains at coating surface in comparison to that at interface and also diffusion of Fe adjacent to the interface. > The delamination was suggested as the dominant mechanism of the wear. In this regard, plate-like wear debris consisted of voids and cracks. In addition, due to increase in surface temperature, Cr{sub 2}O{sub 3} oxide phase was formed during wear tests. - Abstract: This paper deals with the investigation of the microstructure and wear behavior of the stellite 6 cladding on precipitation hardening martensitic stainless steel (17-4PH) using gas tungsten arc welding (GTAW) method. 17-4 PH stainless steel is widely used in oil and gas industries. Optical metallography, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were employed to study the microstructure and wear mechanisms. X-ray diffraction analysis was also used to identify phases formed in the coating. The results showed that the microstructure of the surface layer consisted of carbides embedded in a Co-rich solid solution with a dendritic structure. In addition, the dendritic growth in the coating was epitaxial. Primary phases formed during the process were Co (fcc), Co (hcp), lamellar eutectic phases, M{sub 23}C{sub 6} and Cr{sub 7}C{sub 3} type carbides. The results of the wear tests indicated that the delamination was the dominant mechanism. So, it is necessary to apply an inter-layer between the substrate and top coat.

  19. Aespoe Task Force on modelling of groundwater flow and transport of solutes. Review of Tasks 6b, 6b and 6b

    Energy Technology Data Exchange (ETDEWEB)

    Hodgkinson, David [Quintessa, Henley-on-Thames (United Kingdom); Black, John [In Situ Solutions, East Bridgford (United Kingdom)

    2005-03-01

    This report forms part of an independent review of the specifications, execution and results of Task 6 of the Aespoe Task Force on Modelling of Groundwater Flow and Transport of Solutes, which is seeking to provide a bridge between site characterization and performance assessment approaches to solute transport in fractured rock. The present report is concerned solely with Tasks 6b, 6b and 6b which relate to the transport of tracers on a 5-metre scale in Feature A at the TRUE-1 site. The task objectives, specifications and individual modelling team results are summarised and reviewed, and an evaluation of the overall exercise is presented. The report concludes with assessments of what has been learnt, the implications for the Task 6 objectives, and some possible future directions.

  20. Effects of long-term high temperature exposure on the microstructure of Haynes alloy 230

    Energy Technology Data Exchange (ETDEWEB)

    Veverkova, J.; Strang, A.; Atkinson, H.V. [Leicester Univ. (United Kingdom). Dept. of Engineering; Marchant, G.R. [Siemens Industrial Turbomachinery Ltd., Lincoln (United Kingdom)

    2010-07-01

    Haynes Alloy 230 was specifically designed to have excellent long-term thermal stability and resistance to the precipitation of damaging phases. This paper describes in detail studies on the effects of long-term high temperature exposure on the hardness, microstructural changes and tensile properties of thermally exposed samples of Haynes Alloy 230. The samples from the 2mm thick sheet material have been investigated using X-Ray diffraction and advanced electron microscopy techniques (FEGSEM, TEM etc.). The evolution of the precipitating phases was monitored across a wide range of temperatures (from 500 C to 1170 C) and durations (from 24 hours up to 30000 hours) and several key phases have been identified. In addition to the primary W-rich carbide and the precipitation of Cr-rich M{sub 23}C{sub 6}, a new brittle phase/carbide was observed within the microstructure at the highest exposure temperatures (above 930 C). (orig.)

  1. Lung abscess caused by Streptococcus pneumoniae serotype 6B

    Directory of Open Access Journals (Sweden)

    Yuhei Ito

    Full Text Available Lung abscess has been considered to be a rare complication of pneumococcal infection, and most cases are reported to be Streptococcus pneumoniae serotype 3. A 67-year-old man presented with fever and was diagnosed to have lung abscess caused by S. pneumoniae serotype 6B. The minimal inhibitory concentration (MIC of penicillin for the isolate was 1 μg/mL. He was treated with high-dose intravenous sulbactam/ampicillin as definitive therapy based on susceptibility testing for S. pneumoniae and recovered successfully without surgical intervention. S. pneumoniae serotype 6B can cause lung abscess. Keywords: Streptococcus pneumoniae, Lung abscess, Serotype 6B, Penicillin-resistant Streptococcus pneumoniae

  2. Lung abscess caused by Streptococcus pneumoniae serotype 6B.

    Science.gov (United States)

    Ito, Yuhei; Toyoshima, Hirokazu; Suzuki, Takehiro; Iwamoto, Keisuke; Sasano, Hajime; Itani, Hidetoshi; Kondo, Shigeto; Tanigawa, Motoaki

    2018-01-01

    Lung abscess has been considered to be a rare complication of pneumococcal infection, and most cases are reported to be Streptococcus pneumoniae serotype 3. A 67-year-old man presented with fever and was diagnosed to have lung abscess caused by S. pneumoniae serotype 6B. The minimal inhibitory concentration (MIC) of penicillin for the isolate was 1 μg/mL. He was treated with high-dose intravenous sulbactam/ampicillin as definitive therapy based on susceptibility testing for S. pneumoniae and recovered successfully without surgical intervention. S. pneumoniae serotype 6B can cause lung abscess.

  3. Thermo-Viscoplastic Behavior of Ni-Based Superalloy Haynes 282 and Its Application to Machining Simulation

    Directory of Open Access Journals (Sweden)

    Marcos Rodríguez-Millán

    2017-12-01

    Full Text Available Ni-based superalloys are extensively used in high-responsibility applications in components of aerospace engines and gas turbines with high temperature service lives. The wrought, γ’-strengthened superalloy Haynes 282 has been recently developed for applications similar to other common superalloys, such as Waspaloy or Inconel 718, with improved creep behavior, thermal stability, and fabrication ability. Despite the potential of Haynes 282, there are still important gaps in the knowledge of the mechanical behavior of this alloy. In fact, it was not possible to find information concerning the mechanical behavior of the alloy under impulsive loading. This paper focuses on the mechanical characterization of the Haynes 282 at strain rates ranging from 0.1 to 2800 s−1 and high temperatures ranging from 293 to 523 K using Hopkinson bar compression tests. The experimental results from the thermo-mechanical characterization allowed for calibration of the Johnson–Cook model widely used in modeling metallic alloy’s responses under dynamic loading. Moreover, the behavior of Haynes 282 was compared to that reported for Inconel 718, and the results were used to successfully model the orthogonal cutting of Haynes 282, being a typical case of dynamic loading requiring previous characterization of the alloy.

  4. HAYNES 244 alloy – a new 760 ∘C capable low thermal expansion alloy

    Directory of Open Access Journals (Sweden)

    Fahrmann Michael G.

    2014-01-01

    Full Text Available HAYNES® 244TM alloy is a new 760∘C capable, high strength low thermal expansion (CTE alloy. Its nominal chemical composition in weight percent is Ni – 8 Cr – 22.5 Mo – 6 W. Recently, a first mill-scale heat of 244 alloy was melted by Haynes International, and processed to various product forms such as re-forge billet, plate, and sheet. This paper presents key attributes of this new alloy (CTE, strength, low-cycle fatigue performance, oxidation resistance, thermal stability as they pertain to the intended use in rings and seals of advanced gas turbines.

  5. Optimization of Cutting Parameters of the Haynes 718 Nickel Alloy With Gas CO2 Laser

    Directory of Open Access Journals (Sweden)

    Jana PETRŮ

    2011-06-01

    Full Text Available This article deals with the application of laser technology and the optimization of parameters in the area of nickel alloy laser cutting intended for application in the aircraft industry. The main goal is to outline possibilities of use of the laser technology, primarily its application in the area of 3D material cutting. This experiment is focused on the optimization of cutting parameters of the Haynes 718 alloy with a gas CO2 laser. Originating cuts are evaluated primarily from the point of view of cut quality and accompanying undesirable phenomena occurring in the process of cutting. In conclusion the results achieved in the metallographic laboratory are described and analyzed.

  6. Laser Clad and HVOF-Sprayed Stellite 6 Coating in Chlorine-Rich Environment with KCl at 700 °C.

    Czech Academy of Sciences Publication Activity Database

    Pala, Z.; Bai, M.; Lukáč, František; Hussain, T.

    2017-01-01

    Roč. 88, 5-6 (2017), s. 749-771 ISSN 0030-770X Institutional support: RVO:61389021 Keywords : Stellite 6 * KCl * High-temperature corrosion * HVOF * Laser cladding Subject RIV: JK - Corrosion ; Surface Treatment of Materials OBOR OECD: Coating and films Impact factor: 1.196, year: 2016 https://link.springer.com/article/10.1007/s11085-017-9776-7

  7. Measuring Dilution and Wear for Laser Cladding of Stellite 6 Produced on a P91 Steel Substrate using Two Different Heat Inputs

    Directory of Open Access Journals (Sweden)

    Kusmoko Alain

    2016-01-01

    Full Text Available Stellite 6 was deposited by laser cladding on a P91 substrate with energy inputs of 1 kW (P91-1 and 1.8 kW (P91–1.8. The chemical compositions, microstructures and surface roughnesses of these coatings were characterized by atomic absorption spectroscopy, scanning electron microscopy and atomic force microscopy. The microhardness of the coatings was measured and the wear mechanism of the coatings was evaluated using a pin-on-plate (reciprocating wear testing machine. The results showed less cracking and pore development for Stellite 6 coatings applied to the P91 steel substrate with the lower heat input (P91–1. Further, the Stellite coating for P91-1 was significantly harder than that obtained for P91–1.8. The wear test results indicated that the weight loss for P91–1 was much lower than for P91–1.8. The surface topography data indicated that the surface roughness for P91-1 was much lower than for P91–1.8. The measurements of dilution and carbon content showed that P91–1 has lower dilution and higher concentration of carbon than P91–1.8. It is concluded that the lower hardness of the coating for P91–1.8, together with the softer underlying substrate structure, markedly reduced the wear resistance of the Stellite 6 coating and the lower hardness of the coating for P91-1.8 was due to higher level of dilution and lower concentration of carbon.

  8. The impurity transport in HT-6B tokamak

    International Nuclear Information System (INIS)

    Huang Rong; Xie Jikang; Li Linzhong; He Yexi; Wang Shuya; Deng Chuanbao; Li Guoxiang; Qiu Lijian

    1992-06-01

    The quasi-stationary profiles of the impurity ionization stages in HT-6B tokamak were determined by monitoring the VUV (vacuum ultraviolet) and visible line emissions from impurities. An impurity transport code was set up. The impurity transport coefficients and other parameters of impurities in that device were simulated and determined. From the measurement of impurity emission profiles and simulation analysis, it is concluded that the impurity confinement is improved and the impurity recycling is reduced by the slow magnetic compression. Some characteristics of impurity transport in that device are also discussed

  9. Chemical constituents in the Peedee and Castle Hayne aquifers: Porters Neck area, New Hanover County, North Carolina

    Science.gov (United States)

    Roberts, T.L.; Harris, W.B.

    2004-01-01

    Concerns about overuse and potential contamination of major aquifers in the southeastern part of North Carolina resulted in the initiation of a subsurface water quality study in February 2001. The focus of this study was to examine variations in nutrients (NO3-, TRP, SO42- Cl-, NH4+) and total dissolved Fe in the Cretaceous Peedee and Tertiary Castle Hayne Limestone aquifers of northeastern New Hanover County. Water samples were collected monthly for one year from sixteen wells located in the Porters Neck area (west of the Intracoastal Waterway and south of Futch Creek) and four springs located on the south side of Futch Creek. Variations in selective nutrient concentrations were measured between and within each aquifer. Concentrations of NH4+ and Fe increased in the Peedee sandstone aquifer during the warmer summer and early fall months. In late summer to early fall, Fe, NO 3-, NH4+, and TRP concentrations in the Castle Hayne Limestone aquifer were significantly higher than in the spring and winter months. Chloride and SO 42- concentrations for the Castle Hayne Limestone aquifer both increased during the warmer months, probably as a result of saltwater intrusion. Factors considered for nutrient and Fe variance include: temperature variation, anaerobic conditions, subsurface stratigraphy/structure, recharge locations, site location and surface fertilization. The shallower Castle Hayne Limestone aquifer showed seasonal variability in the study area, whereas the Peedee sandstone aquifer showed little to no seasonal variability. Increases in NO3- and TRP lagged slightly behind periods of high fertilization and were more prevalent down-dip of a major golf course. Nutrient content and seasonal variation of Futch Creek springs indicated that they originate from the Castle Hayne Limestone aquifer.

  10. 17 CFR 259.206 - Form U-6B-2, for notification of security issues exempt under section 6(b) of the Act.

    Science.gov (United States)

    2010-04-01

    ... of security issues exempt under section 6(b) of the Act. 259.206 Section 259.206 Commodity and... security issues exempt under section 6(b) of the Act. This form shall be filed pursuant to section 6(b) of the Act as the certificate of notification of the issue, sale, renewal, or guaranty of securities...

  11. Estimation of the Thickness and the Material Combination of the Thermal Stress Control Layer (TSCL) for the Stellite21 Hardfaced STD61 Hot Working Tool Steel Using Three-Dimensional Finite Element Analysis

    International Nuclear Information System (INIS)

    Park, Na-Ra; Ahn, Dong-Gyu; Oh, Jin-Woo

    2014-01-01

    The research on a thermal stress control layer (TSCL) begins to undertake to reduce residual stress and strain in the vicinity of the joined region between the hardfacing layer and the base part. The goal of this paper is to estimate the material combination and the thickness of TSCL for the Stellite21 hardfaced STD61 hot working tool steel via three-dimensional finite element analysis (FEA). TSCL is created by the combination of Stellite21 and STD61. The thickness of TSCL ranges from 0.5 mm to 1.5 mm. The influence of the material combination and the thickness of TSCL on temperature, thermal stress and thermal strain distributions of the hardfaced part have been investigated. The results of the investigation have been revealed that a proper material combination of TSCL is Stellite21 of 50 % and STD61 of 50 %, and its appropriate thickness is 1.0 mm

  12. The influence of cooling rate from annealing temperature on the microstructure of Haynes 230

    International Nuclear Information System (INIS)

    Sah, Injin; Hong, Sunghoon; Jang, Changheui

    2015-01-01

    The effects of cooling rate from annealing temperature, which simulated the diffusion bonding process, on the microstructure of Haynes 230 (Ni-22Cr-14W-5Co) were investigated. While the grain boundaries are slightly covered with Cr-rich M 23 C 6 carbides for the diffusion-bonded and quenched condition, precipitates were extensively present on/near the grain boundaries for the furnace-cooled specimens. For the furnace-cooled specimens, lamellar precipitates were extensively formed near the grain boundaries below 1 000 deg. C, with intervals of a few hundred nanometers. Also, grain boundaries were severely serrated for the furnace-cooled specimens. Through electron probe micro analysis and transmission electron microscope, the lamellar precipitates were identified as (Cr,W)-rich M 23 C 6 -type lamellar carbides. Despite the differences in microstructure, tensile properties were not much affected by the cooling rate. Creep tests are underway and results will be presented. (authors)

  13. Tensile and Creep-Rupture Evaluation of a New Heat of Haynes Alloy 25

    International Nuclear Information System (INIS)

    Shingledecker, J.P.; Glanton, D.B.; Martin, R.L.; Sparks, B.L.; Swindeman, R.W.

    2007-01-01

    From 1999 to 2006, a program was undertaken within the Materials Science and Technology Division, formerly the Metals and Ceramics Division, of Oak Ridge National Laboratory to characterize the tensile and creep-rupture properties of a newly produced heat of Haynes alloy 25 (L-605). Tensile properties from room temperature to 1100 C were evaluated for base material and welded joints aged up to 12,000 hours at 675 C. Creep and creep-rupture tests were conducted on base metal and cross-weldments from 650 to 950 C. Pressurized tubular creep tests were conducted to evaluate multiaxial creep-rupture response of the material. Over 800,000 hours of creep test data were generated during the test program with the longest rupture tests extending beyond 38,000 hours, and the longest creep-rate experiments exceeding 40,000 hours

  14. Experimental and modeling results of creep fatigue life of Inconel 617 and Haynes 230 at 850 C

    International Nuclear Information System (INIS)

    Chen, Xiang; Sokolov, Mikhail A.; Sham, Sam; Erdman, Donald L. III; Busby, Jeremy T.; Mo, Kun; Stubbins, James

    2013-01-01

    Creep fatigue testing of Ni-based superalloy Inconel 617 and Haynes 230 were conducted in the air at 850 C. Tests were performed with fully reversed axial strain control at a total strain range of 0.5%, 1.0% or 1.5% and hold time at maximum tensile strain for 3, 10 or 30 min. In addition, two creep fatigue life prediction methods, i.e. linear damage summation and frequency-modified tensile hysteresis energy modeling, were evaluated and compared with experimental results. Under all creep fatigue tests, Haynes 230 performed better than Inconel 617. Compared to the low cycle fatigue life, the cycles to failure for both materials decreased under creep fatigue test conditions. Longer hold time at maximum tensile strain would cause a further reduction in both material creep fatigue life. The linear damage summation could predict the creep fatigue life of Inconel 617 for limited test conditions, but considerably underestimated the creep fatigue life of Haynes 230. In contrast, frequency-modified tensile hysteresis energy modeling showed promising creep fatigue life prediction results for both materials.

  15. Low-cycle fatigue deformation characteristics of Haynes {reg{underscore}sign} HR-120{reg{underscore}sign} alloy

    Energy Technology Data Exchange (ETDEWEB)

    Liaw, P.K.; He, Y.H.; Miller, L.; Huang, M.; Brooks, C.R.; Seeley, R.R.; Klarstrom, D.L.

    1999-07-01

    Low-cycle fatigue deformation characteristics of HAYNES HR-120 alloy at room and high temperatures were studied under axial strain control. Test results show that there is a significant effect of test temperature on the low-cycle fatigue behavior of HAYNES HR-120 alloy. It was found that the alloy could cyclically harden at moderately high temperatures (649 C and 871 C), but generally cyclically soften at room temperature (24 C) and high temperature (982 C). However, the variation of the stress amplitude with cycles at the temperatures of 24 C and 982 C depended on the total strain range. The significant cyclic hardening of the alloy occurred at the high total strain ranges of 1.5% and 2.0% during the beginning state of the test at both 24C and 982 C. Microstructural analyses indicated that the cyclic hardening behavior of the alloy at the test temperature of 649 C could be related to the formation of a number of deformation bands. Nevertheless, increasing the test temperature to 871 C, cyclic hardening was attributed to the precipitation of secondary-phase particles. Furthermore, it was also found that the coarsening of secondary-phase particles brought about cyclic softening of the alloy at the high temperature of 982 C. Coffin-Manson equations and Holloman equations were given for HAYNES HR-120 alloy at different temperatures.

  16. Heterologous expression of Helicoverpa armigera cytochrome P450 CYP6B7 in Pichia pastoris and interactions of CYP6B7 with insecticides.

    Science.gov (United States)

    Zhao, Chunqing; Song, Genmiao; Duan, Hongxia; Tang, Tao; Wang, Chen; Qiu, Lihong

    2017-09-01

    Previous studies indicated that constitutive over-expression of cytochrome P450 CYP6B7 was involved in fenvalerate resistance in Helicoverpa armigera. In this study, the CYP6B7 gene from H. armigera (namely HaCYP6B7), was heterologously expressed in Pichia pastoris GS115. A vector pPICZA-HaCYP6B7 was constructed and transformed into P. pastoris GS115, the transformant of pPICZA-HaCYP6B7-GS115 was then cultured and induced by 1% (v/v) methanol and the heterologous expression of HaCYP6B7 protein in P. pastoris was confirmed by SDS-PAGE and western blot. Microsomes containing the expressed HaCYP6B7 showed activities against model substrate p-nitroanisole and 7-ethoxycoumarin, with p-nitroanisole O-demethylation (PNOD) and 7-ethoxycoumarin O-deethylation (ECOD) activities of 15.66- and 4.75-fold of the control, respectively. Moreover, it showed degradation activities against the insecticides bifenthrin, fenvalerate and chlorpyrifos, with clearance activities of 6.88-, 1.49- and 2.27-fold of the control, respectively. The interactions of HaCYP6B7 with insecticides were further confirmed by molecular docking in silico with binding scores of 5.450, 5.295 and 2.197 between putative HaCYP6B7 protein and bifenthrin, fenvalerate and chlorpyrifos, respectively. The results of present study provided more direct and important evidence on the role of HaCYP6B7 conferring pyrethroid resistance in H. armigera. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  17. Weldability of the superalloys Haynes 188 and Hastelloy X by Nd:YAG

    Directory of Open Access Journals (Sweden)

    Graneix Jérémie

    2014-01-01

    Full Text Available The requirements for welded aircraft parts have become increasingly severe, especially in terms of the reproducibility of the geometry and metallurgical grade of the weld bead. Laser welding is a viable method of assembly to meet these new demands, because of automation, to replace the manual TIG welding process. The purpose of this study is to determine the weldability of Hastelloy X and Haynes 188 alloys by the butt welding process with a Nd:YAG laser. To identify the influential parameters of the welding process (laser power, feed rate, focal diameter and flow of gas while streamlining testing, an experimental design was established with the CORICO software using the graphic correlation method. The position of the focal point was fixed at 1/3 of the thickness of the sheet. The gas flow rate and the power of the beam have a major effect on the mechanical properties and geometry of the weld. The strength of the weld is comparable to that of the base metal. However, there is a significant decrease in the elongation at break of approximately 30%. The first observations of the cross section of the weld by scanning electron microscopy coupled with EBSD analysis show a molten zone presenting dendritic large grains compared to the equiaxed grains of the base metals without a heat affected zone.

  18. Microstructural analysis of laser weld fusion zone in Haynes 282 superalloy

    Energy Technology Data Exchange (ETDEWEB)

    Osoba, L.O. [Department of Mechanical and Manufacturing Engineering, University of Manitoba, Winnipeg, Manitoba, R3T 5V6 (Canada); Ding, R.G. [Department of Metallurgy and Materials Engineering, University of Birmingham, Birmingham B15 2TT (United Kingdom); Ojo, O.A., E-mail: ojo@cc.umanitoba.ca [Department of Mechanical and Manufacturing Engineering, University of Manitoba, Winnipeg, Manitoba, R3T 5V6 (Canada)

    2012-03-15

    Analytical electron microscopy and spectroscopy analyses of the fusion zone (FZ) microstructure in autogenous laser beam welded Haynes 282 (HY 282) superalloy were performed. The micro-segregation patterns observed in the FZ indicate that Co, Cr and Al exhibited a nearly uniform distribution between the dendrite core and interdendritic regions while Ti and Mo were rejected into the interdendritic liquid during the weld solidification. Transmission electron diffraction analysis and energy dispersive X-ray microanalysis revealed the second phase particles formed along the FZ interdendritic region to be Ti-Mo rich MC-type carbide particles. Weld FZ solidification cracking, which is sometimes associated with the formation of {gamma}-{gamma}' eutectic in {gamma}' precipitation strengthened nickel-base superalloys, was not observed in the HY 282 superalloy. Modified primary solidification path due to carbon addition in the newly developed superalloy is used to explain preclusion of weld FZ solidification cracking in the material. - Highlights: Black-Right-Pointing-Pointer A newly developed superalloy was welded by CO{sub 2} laser beam joining technique. Black-Right-Pointing-Pointer Electron microscopy characterization of the weld microstructure was performed. Black-Right-Pointing-Pointer Identified interdendritic microconstituents consist of MC-type carbides. Black-Right-Pointing-Pointer Modification of primary solidification path is used to explain cracking resistance.

  19. Chemical composition and nutritional evaluation of the seeds of Acacia tortilis (Forssk.) Hayne ssp. raddiana.

    Science.gov (United States)

    Embaby, Hassan E; Rayan, Ahmed M

    2016-06-01

    Chemical composition and nutritional evaluation as well as physicochemical and functional properties of seed flour of Acacia tortilis (Forssk.) Hayne ssp. raddiana were studied. The results indicated that seeds contained 5.30% moisture, 3.99% ash, 9.19% fat, 14.31% fiber, 27.21% protein and 45.30% carbohydrates. Potassium was the predominant element followed by calcium and then phosphorous. Phytic acid, tannins and trypsin inhibitor as antinutrients were detected. The amino acid profile compared well with FAO/WHO recommended pattern except for cystine/methionine, isoleucine, tyrosine/phenylalanine, lysine and threonine. Also, the first limiting amino acid was lysine. Fatty acid composition showed that linoleic acid was the major fatty acid, followed by palmitic, stearic, oleic and arachidic acids. The seed oil showed absorbance in the ultraviolet ranges, thus it can be used as a broad spectrum UV protectant. For physicochemical and functional properties, acacia seeds flour had excellent water holding index, swelling index, foaming capacity and foam stability. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Phase I decontamination of the J.C. Haynes site, Newark, Ohio. Final report

    International Nuclear Information System (INIS)

    Emswiler, T.R.

    1985-11-01

    Phase I consisted of the primary decontamination, packaging, and shipment of all 241 Am-contaminated gloveboxes, vent system, and miscellaneous waste items located in the laboratory restricted area in the J.C. Haynes house. The primary goals of Phase I were to locate and account for a major quantity of 241 Am which was unaccounted for and to remove all radioactive materials and contamination posing an imminent hazard to public health and safety. All Phase I operations were conducted under a Quality Assurance (QA) Program Plan and QA procedures written specifically for this program. In addition, certain generic Battelle QA procedures were used for routine tasks. All operations were conducted under strict health physics supervision and procedures. Cognizant ORAU and US Nuclear Regulatory Commission (NRC) personnel were on site during the entire Phase I operation and provided support and approval in the daily operations. All staff members had participated in previous decontamination and decommissioning programs involving transuranic waste and completed Phase I in a well controlled, timely, and safe manner

  1. Microstructural analysis of laser weld fusion zone in Haynes 282 superalloy

    International Nuclear Information System (INIS)

    Osoba, L.O.; Ding, R.G.; Ojo, O.A.

    2012-01-01

    Analytical electron microscopy and spectroscopy analyses of the fusion zone (FZ) microstructure in autogenous laser beam welded Haynes 282 (HY 282) superalloy were performed. The micro-segregation patterns observed in the FZ indicate that Co, Cr and Al exhibited a nearly uniform distribution between the dendrite core and interdendritic regions while Ti and Mo were rejected into the interdendritic liquid during the weld solidification. Transmission electron diffraction analysis and energy dispersive X-ray microanalysis revealed the second phase particles formed along the FZ interdendritic region to be Ti–Mo rich MC-type carbide particles. Weld FZ solidification cracking, which is sometimes associated with the formation of γ–γ' eutectic in γ' precipitation strengthened nickel-base superalloys, was not observed in the HY 282 superalloy. Modified primary solidification path due to carbon addition in the newly developed superalloy is used to explain preclusion of weld FZ solidification cracking in the material. - Highlights: ► A newly developed superalloy was welded by CO 2 laser beam joining technique. ► Electron microscopy characterization of the weld microstructure was performed. ► Identified interdendritic microconstituents consist of MC-type carbides. ► Modification of primary solidification path is used to explain cracking resistance.

  2. Biaxial thermal creep of Inconel 617 and Haynes 230 at 850 and 950 °C

    International Nuclear Information System (INIS)

    Tung, Hsiao-Ming; Mo, Kun; Stubbins, James F.

    2014-01-01

    The biaxial thermal creep behavior of Inconel 617 and Haynes 230 at 850 and 950 °C was investigated. Biaxial stresses were generated using the pressurized tube technique. The detailed creep deformation and fracture mechanism have been studied. Creep curves for both alloys showed that tertiary creep accounts for a greater portion of the materials’ life, while secondary creep only accounts for a small portion. Fractographic examinations of the two alloys indicated that nucleation, growth, and coalescence of creep voids are the dominant micro-mechanisms for creep fracture. At 850 °C, alloy 230 has better creep resistance than alloy 617. When subjected to the biaxial stress state, the creep rupture life of the two alloys was considerably reduced when compared to the results obtained by uniaxial tensile creep tests. The Monkman–Grant relation proves to be a promising method for estimating the long-term creep life for alloy 617, whereas alloy 230 does not follow the relation. This might be associated with the significant changes in the microstructure of alloy 230 at high temperatures

  3. Measurement and modeling of residual stress in a welded Haynes[reg] 25 cylinder

    International Nuclear Information System (INIS)

    Larsson, C.; Holden, T.M.; Bourke, M.A.M.; Stout, M.; Teague, J.; Lindgren, L.-E.

    2005-01-01

    An experimental and simulation study of residual stresses was made in the vicinity of a gas tungsten arc weld, used to join a hemispherical end cap to a cylinder. The capped cylinder is used in a satellite application and was fabricated from a Co-based Haynes[reg] 25 alloy. The cylinder was 34.7 mm in outer diameter and 3.3 mm in thickness. The experimental measurements were made by neutron diffraction and the simulation used the implicit Marc finite element code. The experimental resolution was limited to approximately 3 mm parallel to the axis of the cylinder (the weld was 6 mm in the same direction) and comparison over the same volume of the finite element prediction showed general agreement. Subject to the limited spatial resolution, the largest experimentally measured tensile residual stress was 180 MPa, located at the middle of the weld. However, the predictions suggest that there are regions in the weld where average tensile residual stresses as much as 400 MPa exist. One qualitative disparity between the model and the experiments was that the measurement included a larger degree of asymmetry on either side of the weld than predicted by the model

  4. Measurement and modeling of residual stress in a welded Haynes[reg] 25 cylinder

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, C. [Div. of Eng. Mat., Department of Mech. Eng., Linkoeping University, 58183 Linkoeping (Sweden)]. E-mail: clarsson@cfl.rr.com; Holden, T.M. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Bourke, M.A.M. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Stout, M. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Teague, J. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Lindgren, L.-E. [Div. Comp. Aided Design, Lulea University of Technology and Dalarna University, 97187 Lulea (Sweden)

    2005-06-15

    An experimental and simulation study of residual stresses was made in the vicinity of a gas tungsten arc weld, used to join a hemispherical end cap to a cylinder. The capped cylinder is used in a satellite application and was fabricated from a Co-based Haynes[reg] 25 alloy. The cylinder was 34.7 mm in outer diameter and 3.3 mm in thickness. The experimental measurements were made by neutron diffraction and the simulation used the implicit Marc finite element code. The experimental resolution was limited to approximately 3 mm parallel to the axis of the cylinder (the weld was 6 mm in the same direction) and comparison over the same volume of the finite element prediction showed general agreement. Subject to the limited spatial resolution, the largest experimentally measured tensile residual stress was 180 MPa, located at the middle of the weld. However, the predictions suggest that there are regions in the weld where average tensile residual stresses as much as 400 MPa exist. One qualitative disparity between the model and the experiments was that the measurement included a larger degree of asymmetry on either side of the weld than predicted by the model.

  5. 17 CFR 270.6b-1 - Exemption of employees' securities company pending determination of application.

    Science.gov (United States)

    2010-04-01

    ...' securities company pending determination of application. 270.6b-1 Section 270.6b-1 Commodity and Securities... 1940 § 270.6b-1 Exemption of employees' securities company pending determination of application. Any... Act (54 Stat. 801; 15 U.S.C. 80a-6) shall be exempt, pending final determination of such application...

  6. 29 CFR 783.26 - The section 6(b)(2) minimum wage requirement.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false The section 6(b)(2) minimum wage requirement. 783.26... The section 6(b)(2) minimum wage requirement. Section 6(b), with paragraph (2) thereof, requires the... prescribed by” paragraph (1) of the subsection is the minimum wage rate applicable according to the schedule...

  7. Micromorphology of the floral nectary of red horse chestnut (Aesculus ×carnea Hayne

    Directory of Open Access Journals (Sweden)

    Elżbieta Weryszko-Chmielewska

    2014-04-01

    Full Text Available In Europe Aesculus ×carnea Hayne is planted in cities as an avenue tree. Compared to A. hippocastanum L., it is more drought resistant, but less resistant to low temperatures. A. ×carnea is a lower tree than A. hippocastanum and develops a smaller corolla. It produces dark green, shiny and crinkled leaves. Its flowers have different colours, from bright pink to carmine red. The nectary glands secrete nectar abundantly. Due to the long corolla tube, nectar is difficult to reach for bees. The aim of this study was to investigate the topography and micromorphology of the nectaries of A. ×carnea using scanning electron microscopy. The study shows that the nectary gland of red horse chestnut forms an incomplete ring around the base of the staminal filaments, surrounding only four stamens out of the seven that occur in the flower. Three stamens are outside the nectary. In its widest place, the nectary diameter reaches 2.7 mm. Three expanded portions of the gland can bee seen in the marginal part of the nectary, adjoining the petals. The part of the nectary adjacent to the filaments forms a convex protrusion with a wavy appearance (shape, which results from the vicinity of the filaments. Nectar is secreted through numerous stomata located beneath the convex part of the nectary. The stoma length is 21.7 μm, while the width 23.3 μm. In the material examined, most stomata had open pores. Secretion was observed in many places. The stomata were surrounded by 6-7 guard cells; this allows them to be classified as the cyclocytic type. The cells of the stomatal complex were raised above the surface of the other epidermal cells. The walls of the guard cells and of the adjacent epidermal cells were covered by a cuticle with irregular striation.

  8. Metallurgical and mechanical properties of Inconel 600 and stellite; Estudio del comportamiento mecanico-metalurgico de alceacion inconel 600 y estelita

    Energy Technology Data Exchange (ETDEWEB)

    Cstillo, Martin; Villa, Gabriel; Vite, Manuel [Instituto Politecnico Nacional, Mexico D.F. (Mexico); Palacios, Francisco [Instituto Nacional de Investigacion Nuclear (ININ), Estado de Mexico (Mexico); Hernandez, Luis H; Urriolagoita, Guillermo [Instituto Politecnico Nacional, Mexico D.F. (Mexico)

    2005-01-15

    The present work studies the metallurgical and mechanical properties of two alloys, Inconel 600 and stellite, which are within the group of high hardness alloys or superalloys, which are deposited through the electrical weld process to the metallic arc with coated electrode (SMAW) and thereinafter analyzed through electron microscopy, diffractometry and abrasion, Impact and hardness test. The relationship between the microstructure and the final properties of the coating (hardness and abrasion wear resistance) was observed. [Spanish] Este trabajo presenta el estudio sobre las propiedades metalurgicas y mecanicas de dos aleaciones, inconel 600 y estelita, clasificadas dentro del grupo de aleaciones de alta dureza o superaleaciones; las cuales fueron depositadas mediante el proceso de soldadura electrica al arco metalico con electrodo revestido (SMAW) y fueron analizadas mediante microscopia electronica (SEM), difractometria pruebas de abrasion, impacto y dureza. Se observo la relacion entre la microstructura y las propiedades del recubrimiento, como son: dureza, resistencia a la abrasion, resistencia al impacto, ente otras.

  9. Subset of Cortical Layer 6b Neurons Selectively Innervates Higher Order Thalamic Nuclei in Mice.

    Science.gov (United States)

    Hoerder-Suabedissen, Anna; Hayashi, Shuichi; Upton, Louise; Nolan, Zachary; Casas-Torremocha, Diana; Grant, Eleanor; Viswanathan, Sarada; Kanold, Patrick O; Clasca, Francisco; Kim, Yongsoo; Molnár, Zoltán

    2018-05-01

    The thalamus receives input from 3 distinct cortical layers, but input from only 2 of these has been well characterized. We therefore investigated whether the third input, derived from layer 6b, is more similar to the projections from layer 6a or layer 5. We studied the projections of a restricted population of deep layer 6 cells ("layer 6b cells") taking advantage of the transgenic mouse Tg(Drd1a-cre)FK164Gsat/Mmucd (Drd1a-Cre), that selectively expresses Cre-recombinase in a subpopulation of layer 6b neurons across the entire cortical mantle. At P8, 18% of layer 6b neurons are labeled with Drd1a-Cre::tdTomato in somatosensory cortex (SS), and some co-express known layer 6b markers. Using Cre-dependent viral tracing, we identified topographical projections to higher order thalamic nuclei. VGluT1+ synapses formed by labeled layer 6b projections were found in posterior thalamic nucleus (Po) but not in the (pre)thalamic reticular nucleus (TRN). The lack of TRN collaterals was confirmed with single-cell tracing from SS. Transmission electron microscopy comparison of terminal varicosities from layer 5 and layer 6b axons in Po showed that L6b varicosities are markedly smaller and simpler than the majority from L5. Our results suggest that L6b projections to the thalamus are distinct from both L5 and L6a projections.

  10. Synthetic 6B di-, tri-, and tetrasaccharide-protein conjugates contain pneumococcal type 6A and 6B common and 6B-specific epitopes that elicit protective antibodies in mice

    NARCIS (Netherlands)

    Vliegenthart, J.F.G.; Jansen, W.T.M.; Hogenboom, S.; Thijssen, M.J.L.; Kamerling, J.P.; Verhoef, J.; Snippe, H.; Verheul, A.F.M.

    2001-01-01

    The immunogenicity and protective capacity of Streptococcus pneumoniae 6B capsular polysaccharide (PS)-derived synthetic phosphate-containing disaccharide (Rha-ribitol-P-), trisaccharide (ribitol-P-Gal-Glc-), and tetrasaccharide (Rha-ribitol-P-Gal-Glc-)-protein conjugates in rabbits and mice were

  11. Aespoe Task Force on modelling of groundwater flow and transport of solutes. Review of Tasks 6A, 6B and 6B2

    International Nuclear Information System (INIS)

    Hodgkinson, David; Black, John

    2005-03-01

    This report forms part of an independent review of the specifications, execution and results of Task 6 of the Aespoe Task Force on Modelling of Groundwater Flow and Transport of Solutes, which is seeking to provide a bridge between site characterization and performance assessment approaches to solute transport in fractured rock. The present report is concerned solely with Tasks 6b, 6b and 6b which relate to the transport of tracers on a 5-metre scale in Feature A at the TRUE-1 site. The task objectives, specifications and individual modelling team results are summarised and reviewed, and an evaluation of the overall exercise is presented. The report concludes with assessments of what has been learnt, the implications for the Task 6 objectives, and some possible future directions

  12. Human herpesvirus 6B inhibits cell proliferation by a p53-independent pathway

    DEFF Research Database (Denmark)

    Øster, Bodil; Kaspersen, M.D.; Kofod-Olsen, Emil

    2006-01-01

    BACKGROUND: Various forms of cellular stress can activate the tumour suppressor protein p53, an important regulator of cell cycle arrest, apoptosis, and cellular senescence. Cells infected by human herpesvirus 6B (HHV-6B) accumulate aberrant amounts of p53. OBJECTIVES: The aim of this study...

  13. Induction of cell-cell fusion from without by human herpesvirus 6B

    DEFF Research Database (Denmark)

    Pedersen, Simon Metz; Øster, Bodil; Bundgaard, Bettina

    2006-01-01

    Human herpesvirus (HHV) 6A induce fusion from without (FFWO), whereas HHV-6B is believed to be ineffective in this process. Here, we demonstrate that HHV-6B induces rapid fusion in both epithelial cells and lymphocytes. The fusion was identified 1 h postinfection, could be inhibited by antibodies...

  14. Research on 16Mo3 (16M Steel Pipes Overlaid with Haynes Nicro625 Alloy Using MIG (131 Method / Badania Rur Ze Stali 16Mo3 (16M Napawanych Metodą MIG (131 Stopem Haynes Nicro625

    Directory of Open Access Journals (Sweden)

    Golański G.

    2015-12-01

    Full Text Available The paper presents the research on the microstructure and mechanical properties of a pipe made of 16Mo3 steel, overlaid with superalloy based on Haynes NiCro625 nickel. The overlay weld was overlaid using the MIG (131 method. The performed macro - and microscopic tests have shown the correct structure of the overlay weld without any welding unconformities. The examined overlay weld was characterized by a dendritic structure of the primary crystals accumulating towards the heat removal. It has been proved that the content of iron in the surface zone does not exceed 7%, and the steel-superalloy joint shows the highest properties in comparison with the materials joined.

  15. Fatigue Crack Growth Behavior of Nickel-base Superalloy Haynes 282 at 550-750 °C

    Science.gov (United States)

    Rozman, K. A.; Kruzic, J. J.; Hawk, J. A.

    2015-08-01

    The fatigue crack growth rates for nickel-based superalloy Haynes 282 were measured at temperatures of 550, 650, and 750 °C using compact tension specimens with a load ratio of 0.1 and cyclic loading frequencies of 25 Hz and 0.25 Hz. Increasing the temperature from 550 to 750 °C caused the fatigue crack growth rates to increase from ~20 to 60% depending upon the applied stress intensity level. The effect of reducing the applied loading frequency increased the fatigue crack growth rates from ~20 to 70%, also depending upon the applied stress intensity range. The crack path was observed to be transgranular for the temperatures and frequencies used during fatigue crack growth rate testing. At 750 °C, there were some indications of limited intergranular cracking excursions at both loading frequencies; however, the extent of intergranular crack growth was limited and the cause is not understood at this time.

  16. Effects of electrical discharge surface modification of superalloy Haynes 230 with aluminum and molybdenum on oxidation behavior

    International Nuclear Information System (INIS)

    Bai, C.-Y.

    2007-01-01

    The effects of the electrical discharge alloying (EDA) process on improving the high temperature oxidation resistance of the Ni-based superalloy Haynes 230 have been investigated. The 85 at.% Al and 15 at.% Mo composite electrode provided the surface alloying materials. An Al-rich layer is produced on the surface of the EDA specimen alloyed with positive electrode polarity, whereas, many discontinuous piled layers are attached to the surface of the EDA superalloy when negative electrode polarity is selected. The oxidation resistance of the specimen alloyed with positive electrode polarity is better than that of the unalloyed superalloy, and the effective temperature of oxidation resistance of the alloyed layer can be achieved to 1100 o C. Conversely, the oxidation resistance of the other EDA specimen alloyed with negative electrode polarity is even worse than that of the unalloyed superalloy

  17. An investigation of hierachical protein recruitment to the inhibitory platelet receptor, G6B-b.

    Directory of Open Access Journals (Sweden)

    Carmen H Coxon

    Full Text Available Platelet activation is regulated by both positive and negative signals. G6B-b is an inhibitory platelet receptor with an immunoreceptor tyrosine-based inhibitory motif (ITIM and an immunoreceptor tyrosine-based switch motif (ITSM. The molecular basis of inhibition by G6B-b is currently unknown but thought to involve the SH2 domain-containing tyrosine phosphatase SHP-1. Here we show that G6B-b also associates with SHP-2, as well as SHP-1, in human platelets. Using a number of biochemical approaches, we found these interactions to be direct and that the tandem SH2 domains of SHP-2 demonstrated a binding affinity for G6B-b 100-fold higher than that of SHP-1. It was also observed that while SHP-1 has an absolute requirement for phosphorylation at both motifs to bind, SHP-2 can associate with G6B-b when only one motif is phosphorylated, with the N-terminal SH2 domain and the ITIM being most important for the interaction. A number of other previously unreported SH2 domain-containing proteins, including Syk and PLCγ2, also demonstrated specificity for G6B-b phosphomotifs and may serve to explain the observation that G6B-b remains inhibitory in the absence of both SHP-1 and SHP-2. In addition, the presence of dual phosphorylated G6B-b in washed human platelets can reduce the EC(50 for both CRP and collagen.

  18. [A study of PDE6B gene mutation and phenotype in Chinese cases with retinitis pigmentosa].

    Science.gov (United States)

    Cui, Yun; Zhao, Kan-xing; Wang, Li; Wang, Qing; Zhang, Wei; Chen, Wei-ying; Wang, Li-ming

    2003-01-01

    To identify the mutation spectrum of phosphodiesterase beta subunit (PDE6B) gene, the incidence in Chinese patients with retinitis pigmentosa (RP) and their clinical phenotypic characteristics. Screening of mutations within PDE6B gene was performed using polymerase chain reaction-heteroduplex-single strand conformation polymorphism (PCR-SSCP) and DNA sequence in 35 autosomal recessive (AR) RP and 55 sporadic RP cases. The phenotypes of the patients with the gene mutation were examined and analyzed. Novel complex heterozygous variants of PDE6B gene in a sporadic case, a T to C transversion in codon 323 resulting in the substitution of Gly by Ser and 2 base pairs (bp: G and T) insert between the 27th-28th bp upstream of the 5'-end of exon 10 were both present in a same isolate RP. But they are not found in 100 unrelated healthy individuals. Ocular findings showed diffuse pigmentary retinal degeneration in the midperipheral and peripheral fundi, optic atrophy and vessel attenuation. Multi-focal ERG indicated that the rod function was more severely deteriorated. A mutation was found in a case with RP in a ARRP family, a G to A transversion at 19th base upstream 5'-end of exon 11 (within intron 10) of PDE6B gene. A sporadic RP carried a sequence variant of PDE6B gene, a G to C transition, at the 15th base adjacent to the 3'-end of exon l8. In another isolate case with RP was found 2 bp (GT) insert between 31st and 32nd base upstream 5'-end of exon 4 (in intron 3) of PDE6B gene. There are novel complex heterozygous mutations of PDE6B gene responsible for a sporadic RP patient in China. This gene mutation associated with rod deterioration and RP. Several DNA variants were found in introns of PDE6B gene in national population.

  19. The ANL X6B beamline at NSLS: A versatile facility

    International Nuclear Information System (INIS)

    Huang, K.G.; Ramanathan, M.; Montano, P.A.; Illinois Univ., Chicago, IL

    1994-07-01

    We have described the x-ray optics and beamline performance of the ANL X6B beam line at the NSLS. Considerable flexibility has been built into the beam line to accommodate a wide range of x-ray diffraction, scattering, and spectroscopy experiments with various requirements. We presented selected examples of experimental results and showed that with the high intensity, high energy resolution, high-q resolution, and energy tunability, the X6B beam line has become a versatile facility

  20. Inspection report of unauthorized possession and use of unsealed americium-241 and subsequent confiscation, J.C. Haynes Company, Newark, Ohio

    International Nuclear Information System (INIS)

    1985-11-01

    This US Nuclear Regulatory Commission report documents the circumstances surrounding the March 26, 1985, confiscation and subsequent decontamination activities related to the use of unauthorized quantities of americium-241 at the John C. Haynes Company (licensee) of Newark, Ohio. It focuses on the period from early February to July 26, 1985. The incident started when NRC Region III recieved information that John C. Haynes possessed unauthorized quantities of americium-241 and was conducting unauthorized activities (diamond irradiation). By July 26, 1985, the decontamination activities at the licensee's laboratory were concluded. The licensee's actions with diamond irradiation resulted in contamination in restricted and unrestricted areas of the facility. The confiscation and decontamination activities required the combined efforts of NRC, Federal Bureau of Investigation, US Department of Energy, Oak Ridge Associated Universities, the State of Ohio, and the US Environmental Protection Agency. The report describes the factual information and significant findings associated with the confiscation and decontamination activities

  1. Further delineation of the KAT6B molecular and phenotypic spectrum.

    LENUS (Irish Health Repository)

    Gannon, Tamsin

    2015-09-01

    KAT6B sequence variants have been identified previously in both patients with the Say-Barber-Biesecker type of blepharophimosis mental retardation syndromes (SBBS) and in the more severe genitopatellar syndrome (GPS). We report on the findings in a previously unreported group of 57 individuals with suggestive features of SBBS or GPS. Likely causative variants have been identified in 34\\/57 patients and were commonly located in the terminal exons of KAT6B. Of those where parental samples could be tested, all occurred de novo. Thirty out of thirty-four had truncating variants, one had a missense variant and the remaining three had the same synonymous change predicted to affect splicing. Variants in GPS tended to occur more proximally to those in SBBS patients, and genotype\\/phenotype analysis demonstrated significant clinical overlap between SBBS and GPS. The de novo synonymous change seen in three patients with features of SBBS occurred more proximally in exon 16. Statistical analysis of clinical features demonstrated that KAT6B variant-positive patients were more likely to display hypotonia, feeding difficulties, long thumbs\\/great toes and dental, thyroid and patella abnormalities than KAT6B variant-negative patients. The few reported patients with KAT6B haploinsufficiency had a much milder phenotype, though with some features overlapping those of SBBS. We report the findings in a previously unreported patient with a deletion of the KAT6B gene to further delineate the haploinsufficiency phenotype. The molecular mechanisms giving rise to the SBBS and GPS phenotypes are discussed.

  2. Corrosion behavior of Haynes {sup registered} 230 {sup registered} nickel-based super-alloys for integrated coal gasification combined cycle syngas plants. A plant exposure study

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sungkyu; Lee, Jieun; Kang, Suk-Hwan; Lee, Seung-Jong; Yun, Yongseung [Institute for Advanced Engineering (IAE), Gyeonggi-do (Korea, Republic of). Plant Engineering Center; Kim, Min Jung [Sungkyunkwan Univ, Gyeonggi-do (Korea, Republic of). Advanced Materials Technology Research Center

    2015-07-01

    The corrosion behavior of commercially available Haynes {sup registered} 230 {sup registered} nickel-based alloy samples was investigated by exposure to coal-gasifying integrated coal gasification combined cycle pilot plant facilities affiliated with the Institute for Advanced Engineering (2.005 MPa and 160-300 C). The morphological and microstructural analyses of the exposed samples were conducted using scanning electron microscopy and energy-dispersive X-ray spectroscopy analysis on the external surface of the recovered corrosion test samples to obtain information of the corrosion scale. These analyses based on the pre- and post-exposure corrosion test samples combined with thermodynamic Ellingham-Pourbaix stability diagrams provided preliminary insight into the mechanism of the observed corrosion behavior prevailing in the piping materials that connected the particulate removal unit and water scrubber of the integrated coal gasification combined cycle pilot plant. Uniform material wastage was observed after 46 hours of operation, and a preliminary corrosion mechanism was suggested: the observed material waste and corrosion behavior of the Haynes {sup registered} 230 {sup registered} nickel-based alloy samples cut off from the coal syngas integrated coal gasification combined cycle plant were explained by the formation of discontinuous (complex) oxide phases and subsequent chlorine-induced active oxidation under the predominantly reducing environment encountered. This contribution continues the already published studies of the Fe-Ni-Cr-Co alloy Haynes {sup registered} 556 {sup registered}.

  3. Corrosion behavior of Haynes registered 230 registered nickel-based super-alloys for integrated coal gasification combined cycle syngas plants. A plant exposure study

    International Nuclear Information System (INIS)

    Lee, Sungkyu; Lee, Jieun; Kang, Suk-Hwan; Lee, Seung-Jong; Yun, Yongseung; Kim, Min Jung

    2015-01-01

    The corrosion behavior of commercially available Haynes registered 230 registered nickel-based alloy samples was investigated by exposure to coal-gasifying integrated coal gasification combined cycle pilot plant facilities affiliated with the Institute for Advanced Engineering (2.005 MPa and 160-300 C). The morphological and microstructural analyses of the exposed samples were conducted using scanning electron microscopy and energy-dispersive X-ray spectroscopy analysis on the external surface of the recovered corrosion test samples to obtain information of the corrosion scale. These analyses based on the pre- and post-exposure corrosion test samples combined with thermodynamic Ellingham-Pourbaix stability diagrams provided preliminary insight into the mechanism of the observed corrosion behavior prevailing in the piping materials that connected the particulate removal unit and water scrubber of the integrated coal gasification combined cycle pilot plant. Uniform material wastage was observed after 46 hours of operation, and a preliminary corrosion mechanism was suggested: the observed material waste and corrosion behavior of the Haynes registered 230 registered nickel-based alloy samples cut off from the coal syngas integrated coal gasification combined cycle plant were explained by the formation of discontinuous (complex) oxide phases and subsequent chlorine-induced active oxidation under the predominantly reducing environment encountered. This contribution continues the already published studies of the Fe-Ni-Cr-Co alloy Haynes registered 556 registered .

  4. Complexities in human herpesvirus-6A and -6B binding to host cells

    DEFF Research Database (Denmark)

    Pedersen, Simon Metz; Höllsberg, Per

    2006-01-01

    Human herpesvirus-6A and -6B uses the cellular receptor CD46 for fusion and infection of the host cell. The viral glycoprotein complex gH-gL from HHV-6A binds to the short consensus repeat 2 and 3 in CD46. Although all the major isoforms of CD46 bind the virus, certain isoforms may have higher...

  5. Structural Basis of Histone Demethylase KDM6B Histone 3 Lysine 27 Specificity

    DEFF Research Database (Denmark)

    Jones, Sarah E; Olsen, Lars; Gajhede, Michael

    2018-01-01

    KDM subfamily 6 enzymes KDM6A and KDM6B specifically catalyze demethylation of di- and trimethylated lysine on histone 3 lysine 27 (H3K27me3/2) and play an important role in repression of developmental genes. Despite identical amino acid sequence in the immediate surroundings of H3K9me3/2 (ARKS...

  6. Emission of CH4 and N2O from Wastewater Treatment Plants (6B)

    DEFF Research Database (Denmark)

    Thomsen, M.; Lyck, E.

    The report gives a detailed description of the national methodology, national statistics and data background used for the first time implementation of Waste Category 6B in the National Inventory Report. Emissions of methane and nitrous oxide from wastewater handling have been estimated from...

  7. Fatigue Crack Growth Mechanisms for Nickel-based Superalloy Haynes 282 at 550-750 °C

    Science.gov (United States)

    Rozman, Kyle A.; Kruzic, Jamie J.; Sears, John S.; Hawk, Jeffrey A.

    2015-10-01

    The fatigue crack growth rates for nickel-based superalloy Haynes 282 were measured at 550, 650, and 750 °C using compact tension specimens with a load ratio of 0.1 and cyclic loading frequencies of 25 and 0.25 Hz. The crack path was observed to be primarily transgranular for all temperatures, and the observed effect of increasing temperature was to increase the fatigue crack growth rates. The activation energy associated with the increasing crack growth rates over these three temperatures was calculated less than 60 kJ/mol, which is significantly lower than typical creep or oxidation mechanisms; therefore, creep and oxidation cannot explain the increase in fatigue crack growth rates. Transmission electron microscopy was done on selected samples removed from the cyclic plastic zone, and a trend of decreasing dislocation density was observed with increasing temperature. Accordingly, the trend of increasing crack growth rates with increasing temperature was attributed to softening associated with thermally assisted cross slip and dislocation annihilation.

  8. Hydrogeology, hydraulic characteristics, and water-quality conditions in the surficial, Castle Hayne and Peedee aquifers of the greater New Hanover County area, North Carolina, 2012-13

    Science.gov (United States)

    McSwain, Kristen Bukowski; Gurley, Laura N.; Antolino, Dominick J.

    2014-01-01

    A major issue facing the greater New Hanover County, North Carolina, area is the increased demand for drinking water resources as a result of rapid growth. The principal sources of freshwater supply in the greater New Hanover County area are withdrawals of surface water from the Cape Fear River and groundwater from the underlying Castle Hayne and Peedee aquifers. Industrial, mining, irrigation, and aquaculture groundwater withdrawals increasingly compete with public-supply utilities for freshwater resources. Future population growth and economic expansion will require increased dependence on high-quality sources of fresh groundwater. An evaluation of the hydrogeology and water-quality conditions in the surficial, Castle Hayne, and Peedee aquifers was conducted in New Hanover, eastern Brunswick, and southern Pender Counties, North Carolina. A hydrogeologic framework was delineated by using a description of the geologic and hydrogeologic units that compose aquifers and their confining units. Current and historic water-level, water-quality, and water-isotope data were used to approximate the present boundary between freshwater and brackish water in the study area. Water-level data collected during August–September 2012 and March 2013 in the Castle Hayne aquifer show that recharge areas with the highest groundwater altitudes are located in central New Hanover County, and the lowest are located in a discharge area along the Atlantic Ocean. Between 1964 and 2012, groundwater levels in the Castle Hayne aquifer in central New Hanover County have rebounded by about 10 feet, but in the Pages Creek area groundwater levels declined in excess of 20 feet. In the Peedee aquifer, the August–September 2012 groundwater levels were affected by industrial withdrawals in north-central New Hanover County. Groundwater levels in the Peedee aquifer declined more than 20 feet between 1964 and 2012 in northeastern New Hanover County because of increased withdrawals. Vertical gradients

  9. Next-Generation Survey Sequencing and the Molecular Organization of Wheat Chromosome 6B

    Czech Academy of Sciences Publication Activity Database

    Tanaka, T.; Kobayashi, F.; Joshi, G.P.; Šimková, Hana; Nasuda, S.; Doležel, Jaroslav; Handa, H.

    2014-01-01

    Roč. 21, č. 2 (2014), s. 103-114 ISSN 1340-2838 R&D Projects: GA ČR GBP501/12/G090 Grant - others:GA MŠk(CZ) ED0007/01/01 Program:ED Institutional support: RVO:61389030 Keywords : wheat * chromosome 6B * genome sequencing Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 5.477, year: 2014

  10. Investigation of sawtooth behavior and confinement property with RHF on the HT-6B tokamak

    International Nuclear Information System (INIS)

    Hao Yuping; Xie Jikang; Li Linzhong

    1989-01-01

    The experiment results of the resonant helical field (RHF) effects on plasma confinement and sawtooth behavior on the HT-6B Tokamak are presented. The RHF makes decrease of electron thermal conductivity, broadening of temperature profile, increase of plasma density and enhancement of impurity radiation, in meanwhile intensification of sawtooth oscillation (in amplitude, period, rising slope and invert radius) and suppression of m = 2, 3, 4 modes. It is shown that the discharge transforms to a new discharge condition

  11. LYMPHOPROLIFERATIVE SYNDROMES ASSOCIATED WITH HUMAN HERPESVIRUS-6A AND HUMAN HERPESVIRUS-6B

    Directory of Open Access Journals (Sweden)

    Eva Eliassen

    2018-05-01

    Full Text Available Human herpesvirus 6A and 6B (HHV-6A and HHV-6B have been noted since their discovery for their T-lymphotropism. Although it has proven difficult to determine the extent to which HHV-6A and HHV-6B are involved in the pathogenesis of many diseases, evidence suggests that primary infection and reactivation of both viruses may induce or contribute to the progression of several lymphoproliferative disorders, ranging from benign to malignant and including infectious mononucleosis-like illness, drug induced hypersensitivity syndrome/drug reaction with eosinophilia and systemic symptoms (DIHS/DRESS, and nodular sclerosis Hodgkin’s lymphoma. Herein, we discuss the conditions associated with the lymphoproliferative capacity of HHV-6, as well as the potential mechanisms behind them. Continued exploration on this topic may add to our understanding of the interactions between HHV-6 and the immune system and may open the doors to more accurate diagnosis and treatment of certain lymphoproliferative disorders.

  12. A ground-based optical transmission spectrum of WASP-6b

    International Nuclear Information System (INIS)

    Jordán, Andrés; Espinoza, Néstor; Rabus, Markus; Eyheramendy, Susana; Sing, David K.; Désert, Jean-Michel; Bakos, Gáspár Á.; Fortney, Jonathan J.; López-Morales, Mercedes; Szentgyorgyi, Andrew; Maxted, Pierre F. L.; Triaud, Amaury H. M. J.

    2013-01-01

    We present a ground-based optical transmission spectrum of the inflated sub-Jupiter-mass planet WASP-6b. The spectrum was measured in 20 spectral channels from 480 nm to 860 nm using a series of 91 spectra over a complete transit event. The observations were carried out using multi-object differential spectrophotometry with the Inamori-Magellan Areal Camera and Spectrograph on the Baade Telescope at Las Campanas Observatory. We model systematic effects on the observed light curves using principal component analysis on the comparison stars and allow for the presence of short and long memory correlation structure in our Monte Carlo Markov Chain analysis of the transit light curves for WASP-6. The measured transmission spectrum presents a general trend of decreasing apparent planetary size with wavelength and lacks evidence for broad spectral features of Na and K predicted by clear atmosphere models. The spectrum is consistent with that expected for scattering that is more efficient in the blue, as could be caused by hazes or condensates in the atmosphere of WASP-6b. WASP-6b therefore appears to be yet another massive exoplanet with evidence for a mostly featureless transmission spectrum, underscoring the importance that hazes and condensates can have in determining the transmission spectra of exoplanets.

  13. Complexities in human herpesvirus-6A and -6B binding to host cells

    International Nuclear Information System (INIS)

    Pedersen, Simon Metz; Hoellsberg, Per

    2006-01-01

    Human herpesvirus-6A and -6B uses the cellular receptor CD46 for fusion and infection of the host cell. The viral glycoprotein complex gH-gL from HHV-6A binds to the short consensus repeat 2 and 3 in CD46. Although all the major isoforms of CD46 bind the virus, certain isoforms may have higher affinity than others for the virus. Within recent years, elucidation of the viral complex has identified additional HHV-6A and -6B specific glycoproteins. Thus, gH-gL associates with a gQ1-gQ2 dimer to form a heterotetrameric complex. In addition, a novel complex consisting of gH-gL-gO has been described that does not bind CD46. Accumulating evidence suggests that an additional HHV-6A and -6B receptor exists. The previous simple picture of HHV-6A/B-host cell contact therefore includes more layers of complexities on both the viral and the host cell side of the interaction

  14. Ontogênese, anatomia e ultra-estrutura dos nectários extraflorais de Hymenaea stigonocarpa Mart. ex Hayne (Fabaceae - Caesalpinioideae Ontogenesis, anatomy, and ultrastructure of Hymenaea stigonocarpa Mart. ex Hayne (Fabaceae - Caesalpinioideae extrafloral nectaries

    Directory of Open Access Journals (Sweden)

    Élder Antônio Sousa Paiva

    2006-06-01

    Full Text Available O jatobá-do-cerrado (Hymenaea stigonocarpa Mart. ex Hayne apresenta nectários extraflorais (NEFs, os quais são descritos pela primeira vez no gênero. Neste trabalho foram estudadas a distribuição, ontogênese, estrutura e ultra-estrutura dos nectários extraflorais (NEFs. Amostras de folhas em várias fases de desenvolvimento foram coletadas, fixadas e processadas para estudos em microscopia de luz e eletrônica de transmissão e varredura, segundo técnicas convencionais. Testes histoquímicos foram empregados para determinar a natureza química da secreção. Os NEFs estão distribuídos por todo o limbo, sendo mais concentrados nos terços basal e médio de cada folíolo. Estes nectários são embutidos no mesofilo, apresentam tecido secretor envolvido por uma endoderme e são vascularizados por xilema e floema. A atividade secretora dos NEFs é limitada à fase juvenil da folha. Nas folhas mais velhas, os NEFs tornam-se não funcionais. O tecido secretor dos NEFs é formado a partir da protoderme, enquanto a endoderme tem origem no meristema fundamental. No tecido secretor de nectários funcionais as células apresentam citoplasma denso, núcleo volumoso, mitocôndrias, plastídios com sistema de membranas pouco desenvolvido, gotas de óleo dispersas no citosol, dictiossomos e segmentos de retículo endoplasmático liso. A secreção é liberada por meio de rupturas cuticulares e apresenta polissacarídeos e lipídios.Hymenaea stigonocarpa Mart. ex Hayne, known as "jatobá-do-cerrado" has extrafloral nectaries (EFNs, which are reported for the first time in Hymenaea genus. In this research the origin, distribution, structure, and ultrastructure of the EFNs were studied. Samples of leaflets at different developmental stages were collected, fixed and processed by standard methods for analyses at light and electronic microscopes; histochemical tests were employed to determine the nature of secretion products. EFNs are distributed all over

  15. Optimización del proceso de aporte de recubrimientos anticorrosión de Stellite 6 producidos mediante plaqueado láser

    Directory of Open Access Journals (Sweden)

    Vicario, I.

    2009-02-01

    mediante la técnica de plaqueado láser para producir recubrimientos anti-corrosión empleando aleación de Co Stellite 6 en polvo sobre un substrato de acero C45 (AISI 1045. Posteriormente, se lleva a cabo un estudio de las características frente a la corrosión del recubrimiento final obtenido y de su correlación con los parámetros de aporte empleados.

  16. Microstructure of Haynes® 282® Superalloy after Vacuum Induction Melting and Investment Casting of Thin-Walled Components

    Directory of Open Access Journals (Sweden)

    Krzysztof J. Kurzydlowski

    2013-11-01

    Full Text Available The aim of this work was to characterize the microstructure of the as-cast Haynes® 282® alloy. Observations and analyses were carried out using techniques such as X-ray diffraction (XRD, light microscopy (LM, scanning electron microscopy (SEM, transmission electron microscopy (TEM, X-ray spectroscopy (EDS, wave length dispersive X-ray spectroscopy (WDS, auger electron spectroscopy (AES and electron energy-loss spectrometry (EELS. The phases identified in the as-cast alloy include: γ (gamma matrix, γʹ (matrix strengthening phase, (TiMoCrC (primary carbide, TiN (primary nitride, σ (sigma-TCP phase, (TiMo2SC (carbosulphide and a lamellar constituent consisting of molybdenum and chromium rich secondary carbide phase together with γ phase. Within the dendrites the γʹ appears mostly in the form of spherical, nanometric precipitates (74 nm, while coarser (113 nm cubic γʹ precipitates are present in the interdendritic areas. Volume fraction content of the γʹ precipitates in the dendrites and interdendritic areas are 9.6% and 8.5%, respectively. Primary nitrides metallic nitrides (MN, are homogeneously dispersed in the as-cast microstructure, while primary carbides metallic carbides (MC, preferentially precipitate in interdendritic areas. Such preference is also observed in the case of globular σ phase. Lamellar constituents characterized as secondary carbides/γ phases were together with (TiMo2SC phase always observed adjacent to σ phase precipitates. Crystallographic relations were established in-between the MC, σ, secondary carbides and γ/γʹ matrix.

  17. The histone demethylase Kdm6b regulates a mature gene expression program in differentiating cerebellar granule neurons.

    Science.gov (United States)

    Wijayatunge, Ranjula; Liu, Fang; Shpargel, Karl B; Wayne, Nicole J; Chan, Urann; Boua, Jane-Valeriane; Magnuson, Terry; West, Anne E

    2018-03-01

    The histone H3 lysine 27 (H3K27) demethylase Kdm6b (Jmjd3) can promote cellular differentiation, however its physiological functions in neurons remain to be fully determined. We studied the expression and function of Kdm6b in differentiating granule neurons of the developing postnatal mouse cerebellum. At postnatal day 7, Kdm6b is expressed throughout the layers of the developing cerebellar cortex, but its expression is upregulated in newborn cerebellar granule neurons (CGNs). Atoh1-Cre mediated conditional knockout of Kdm6b in CGN precursors either alone or in combination with Kdm6a did not disturb the gross morphological development of the cerebellum. Furthermore, RNAi-mediated knockdown of Kdm6b in cultured CGN precursors did not alter the induced expression of early neuronal marker genes upon cell cycle exit. By contrast, knockdown of Kdm6b significantly impaired the induction of a mature neuronal gene expression program, which includes gene products required for functional synapse maturation. Loss of Kdm6b also impaired the ability of Brain-Derived Neurotrophic Factor (BDNF) to induce expression of Grin2c and Tiam1 in maturing CGNs. Taken together, these data reveal a previously unknown role for Kdm6b in the postmitotic stages of CGN maturation and suggest that Kdm6b may work, at least in part, by a transcriptional mechanism that promotes gene sensitivity to regulation by BDNF. Copyright © 2017 Elsevier Inc. All rights reserved.

  18. Biallelic Variants in OTUD6B Cause an Intellectual Disability Syndrome Associated with Seizures and Dysmorphic Features

    DEFF Research Database (Denmark)

    Santiago-Sim, Teresa; Burrage, Lindsay C; Ebstein, Frédéric

    2017-01-01

    regulators of the ubiquitin system. OTUD6B encodes a member of the ovarian tumor domain (OTU)-containing subfamily of deubiquitinating enzymes. Herein, we report biallelic pathogenic variants in OTUD6B in 12 individuals from 6 independent families with an intellectual disability syndrome associated...

  19. Chromatin-mediated transcriptional regulation by the yeast architectural factors NHP6A and NHP6B

    DEFF Research Database (Denmark)

    Moreira, José Manuel Alfonso; Holmberg, S

    2000-01-01

    The Saccharomyces cerevisiae NHP6A and NHP6B proteins are chromatin architectural factors, functionally and structurally related to the mammalian high mobility group (HMG)-1 and -2 proteins, a family of non-sequence-specific DNA binding proteins. nhp6a nhp6b mutants have various morphological...

  20. Effects of viscosity on magnetohydrodynamic behaviour during limiter biasing on the CT-6B tokamak

    International Nuclear Information System (INIS)

    Khorshid, P.; Wang, L.; Yang, X.Z.; Feng, C.H.; Ghoranneviss, M.

    2005-01-01

    Effects of viscosity on magnetohydrodynamics behaviour during limiter biasing in the CT-6B Tokamak has been investigated. The results shown that subsequent to the application of a positive bias, a decrease followed by an increase in the frequency of magnetic field fluctuations was observed. With contribution of viscous force effects in the radial force balance equation for Limiter Biasing, in terms of the nonstationarity model, it allows us to identify the understanding physics responsible for change in the Mirnov oscillations that could be related to poloidal rotation velocity and radial electric field. It could be seen that the time scale of responses to biasing is important. The response of ∇p i , decrease of poloidal rotation velocity, the edge electrostatics and magnetic fluctuations to external field have been investigated. The results shown that momentum balance equation with considering viscous force term can be use for modeling of limiter biasing in the tokamak. (author)

  1. Human herpesvirus 6B U19 protein is a PML-regulated transcriptional activator that localizes to nuclear foci in a PML-independent manner

    DEFF Research Database (Denmark)

    Kofod-Olsen, Emil; Ross-Hansen, Katrine; Mikkelsen, Jacob Giehm

    2008-01-01

    Human herpesvirus 6B (HHV-6B) contains an IE-B domain spanning open reading frames U16/17-U19, based on homology with human cytomegalovirus. Here, the protein product, U19, of the HHV-6B U19 gene is identified as a 47 kDa transcriptional activator. HHV-6B infection or overexpression of U19...

  2. "I want to be a pop idol". Oscar Wilde between parody and glam re-invention in Todd Haynes' Velvet Goldmine

    Directory of Open Access Journals (Sweden)

    Pierpaolo Martino

    2017-01-01

    Full Text Available Il presente studio analizza Velvet Goldmine un film del 1998 diretto da Todd Haynes al fine di indagare come il regista americano riesca ad evidenziare la centralità del glam (emerso in Gran Bretagna nei primi anni Settanta nella cultura contemporanea, ponendo un' enfasi specifica sull’aspetto che più di ogni altro aveva caratterizzato quell’esperienza, ossia la sovversione parodica dell' idea di mascolinità normativa nei decenni precedenti. Sul palco i 'glamsters' – ossia artisti quali Bolan, Bowie, Roxy Music, Glitter – erano in grado, utilizzando segni visivi quali trucco e abiti 'glitter' di costruire un’identità di genere ibrida che si poneva in netto contrasto con il machismo di molti musicisti degli anni Sessanta. Seguendo un approccio metodologico in cui studi culturali, studi letterari e neo-musicologia finiscono per dialogare tra loro, la presente indagine crea uno stretto rapporto tra Oscar Wilde e la cultura glam – un rapporto individuato dal regista sin dalle prime battute del film – ma che qui viene declinato in un senso più specifico, in base al quale l' intero film rappresenta una parodia o reinvenzione glam dell'intera epopea wildiana e in cui le immagini e gli aforismi wildiani sembrano interrogare con la loro complessità e la loro portata dissacrante il nostro presente.  The present essay analyses Velvet Goldmine a 1998 film directed by Todd Haynes, in order to investigate how the American director points to the relevance of glam (emerged in Great Britain at the beginning of the Seventies within contemporary culture, focusing on one of its most relevant aspects, that is the parodic subversion  of the normative idea of masculinity which was dominant in the previous decades. Glamsters – that is, such artists as Bolan, Bowie, Roxy Music and Glitter – were able, using such visual signs as make-up and glitter dresses, to construct a hybrid gender identity, which sharply contrasted with the normative

  3. KDM6B Elicits Cell Apoptosis by Promoting Nuclear Translocation of FOXO1 in Non-Small Cell Lung Cancer

    Directory of Open Access Journals (Sweden)

    Jun Ma

    2015-08-01

    Full Text Available Background/Aims: Non-small cell lung carcinoma (NSCLC is the most common type of lung cancer and the cause of most cancer-related deaths. The molecular mechanisms that are involved in NSCLC development are currently not well understood. Accumulating evidence shows that histone demethylases play important roles in the regulation of pathological developmental processes in many diseases, including various types of cancers. Methods: Mitochondrial membrane potential assays, migration and invasion assays, caspase-3 and caspase-9 activity assays and western blot analysis were used in this research. Results: We found that overexpression of KDM6B, a demethylase that acts on histone H3 at lysine 27 (H3K27, inhibited cell growth by initiating mitochondria-dependent apoptosis and by attenuating the invasion-metastasis cascade in NSCLC cells. Moreover, our results showed that KDM6B directly interacted with FOXO1 and that overexpression of KDM6B promoted nuclear accumulation of FOXO1. The effects of KDM6B on cell apoptosis and metastasis were weakened by knockdown of FOXO1 expression. On the contrary, knocking down expression of KDM6B inhibited cell apoptosis and promoted cell growth by mitigating the nuclear translocation of FOXO1 in NSCLC cells. Conclusions: These findings suggest that KDM6B may act in a pro-apoptotic role in NSCLC by causing the nuclear translocation of FOXO1.

  4. Effects of Hypocretin/Orexin and Major Transmitters of Arousal on Fast Spiking Neurons in Mouse Cortical Layer 6B.

    Science.gov (United States)

    Wenger Combremont, Anne-Laure; Bayer, Laurence; Dupré, Anouk; Mühlethaler, Michel; Serafin, Mauro

    2016-08-01

    Fast spiking (FS) GABAergic neurons are thought to be involved in the generation of high-frequency cortical rhythms during the waking state. We previously showed that cortical layer 6b (L6b) was a specific target for the wake-promoting transmitter, hypocretin/orexin (hcrt/orx). Here, we have investigated whether L6b FS cells were sensitive to hcrt/orx and other transmitters associated with cortical activation. Recordings were thus made from L6b FS cells in either wild-type mice or in transgenic mice in which GFP-positive GABAergic cells are parvalbumin positive. Whereas in a control condition hcrt/orx induced a strong increase in the frequency, but not amplitude, of spontaneous synaptic currents, in the presence of TTX, it had no effect at all on miniature synaptic currents. Hcrt/orx effect was thus presynaptic although not by an action on glutamatergic terminals but rather on neighboring cells. In contrast, noradrenaline and acetylcholine depolarized and excited these cells through a direct postsynaptic action. Neurotensin, which is colocalized in hcrt/orx neurons, also depolarized and excited these cells but the effect was indirect. Morphologically, these cells exhibited basket-like features. These results suggest that hcrt/orx, noradrenaline, acetylcholine, and neurotensin could contribute to high-frequency cortical activity through an action on L6b GABAergic FS cells. © The Author 2016. Published by Oxford University Press.

  5. Reconstruction of structural evolution in the trnL intron P6b loop of symbiotic Nostoc (Cyanobacteria).

    Science.gov (United States)

    Olsson, Sanna; Kaasalainen, Ulla; Rikkinen, Jouko

    2012-02-01

    In this study we reconstruct the structural evolution of the hyper-variable P6b region of the group I trnLeu intron in a monophyletic group of lichen-symbiotic Nostoc strains and establish it as a useful marker in the phylogenetic analysis of these organisms. The studied cyanobacteria occur as photosynthetic and/or nitrogen-fixing symbionts in lichen species of the diverse Nephroma guild. Phylogenetic analyses and secondary structure reconstructions are used to improve the understanding of the replication mechanisms in the P6b stem-loop and to explain the observed distribution patterns of indels. The variants of the P6b region in the Nostoc clade studied consist of different combinations of five sequence modules. The distribution of indels together with the ancestral character reconstruction performed enables the interpretation of the evolution of each sequence module. Our results indicate that the indel events are usually associated with single nucleotide changes in the P6b region and have occurred several times independently. In spite of their homoplasy, they provide phylogenetic information for closely related taxa. Thus we recognize that features of the P6b region can be used as molecular markers for species identification and phylogenetic studies involving symbiotic Nostoc cyanobacteria.

  6. Clonal relationships among penicillin-susceptible, multiresistant serotype 6B Streptococcus pneumoniae isolates recovered in Greece and France.

    Science.gov (United States)

    Syrogiannopoulos, G A; Doit, C; Grivea, I N; Geslin, P; Bingen, E

    2001-01-01

    In January 1996 the emergence of penicillin-susceptible, multiresistant serotype 6B Streptococcus pneumoniae isolates resistant to chloramphenicol, tetracycline, erythromycin, clindamycin and trimethoprim-sulfamethoxazole was observed in young carriers in the city of Patras, located in the southwestern region of Greece. Later, a significant spread of pneumococci with this unusual phenotype was noted in carriers living in various other areas of the country. Using restriction fragment length polymorphism of the ribosomal RNA genes, clonal relationships were found between these Greek strains and serotype 6B penicillin-susceptible, multiresistant pneumococci isolated in France between January 1992 and September 1996. The French and Greek isolates appear to have a common ancestry.

  7. A high-resolution physical map integrating an anchored chromosome with the BAC physical maps of wheat chromosome 6B

    Czech Academy of Sciences Publication Activity Database

    Kobayashi, F.; Wu, J.Z.; Kanamori, H.; Tanaka, T.; Katagiri, S.; Karasawa, W.; Kaneko, S.; Watanabe, S.; Sakaguchi, T.; Šafář, Jan; Šimková, Hana; Mukai, Y.; Hamada, M.; Saito, M.; Hayakawa, K.; Doležel, Jaroslav; Nasuda, S.; Matsumoto, T.; Handa, H.

    2015-01-01

    Roč. 16, AUG 12 (2015), s. 595 ISSN 1471-2164 R&D Projects: GA ČR GBP501/12/G090; GA MŠk(CZ) LO1204 Institutional support: RVO:61389030 Keywords : Centromere * Chromosomal rearrangement * Chromosome 6B Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 3.867, year: 2015

  8. Slow Bursting Neurons of Mouse Cortical Layer 6b Are Depolarized by Hypocretin/Orexin and Major Transmitters of Arousal.

    Science.gov (United States)

    Wenger Combremont, Anne-Laure; Bayer, Laurence; Dupré, Anouk; Mühlethaler, Michel; Serafin, Mauro

    2016-01-01

    Neurons firing spontaneously in bursts in the absence of synaptic transmission have been previously recorded in different layers of cortical brain slices. It has been suggested that such neurons could contribute to the generation of alternating UP and DOWN states, a pattern of activity seen during slow-wave sleep. Here, we show that in layer 6b (L6b), known from our previous studies to contain neurons highly responsive to the wake-promoting transmitter hypocretin/orexin (hcrt/orx), there is a set of neurons, endowed with distinct intrinsic properties, which displayed a strong propensity to fire spontaneously in rhythmic bursts. In response to small depolarizing steps, they responded with a delayed firing of action potentials which, upon higher depolarizing steps, invariably inactivated and were followed by a depolarized plateau potential and a depolarizing afterpotential. These cells also displayed a strong hyperpolarization-activated rectification compatible with the presence of an I h current. Most L6b neurons with such properties were able to fire spontaneously in bursts. Their bursting activity was of intrinsic origin as it persisted not only in presence of blockers of ionotropic glutamatergic and GABAergic receptors but also in a condition of complete synaptic blockade. However, a small number of these neurons displayed a mix of intrinsic bursting and synaptically driven recurrent UP and DOWN states. Most of the bursting L6b neurons were depolarized and excited by hcrt/orx through a direct postsynaptic mechanism that led to tonic firing and eventually inactivation. Similarly, they were directly excited by noradrenaline, histamine, dopamine, and neurotensin. Finally, the intracellular injection of these cells with dye and their subsequent Neurolucida reconstruction indicated that they were spiny non-pyramidal neurons. These results lead us to suggest that the propensity for slow rhythmic bursting of this set of L6b neurons could be directly impeded by hcrt

  9. Crescimento de Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. e Enterolobium contortisiliquum (Vell. Morong (Leguminosae sob diferentes níveis de sombreamento Growth of Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. e Enterolobium contortisiliquum (Vell. Morong (Leguminosae under different shading levels

    Directory of Open Access Journals (Sweden)

    Ana Lúcia da Silva Lima

    2010-03-01

    Full Text Available Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. é uma espécie clímax tolerante a sombra, ao passo que Enterolobium contortisiliquum (Vell. Morong. é uma espécie pioneira. O desenvolvimento destas espécies pode refletir a habilidade de adaptação aos diferentes fatores ambientais (luz, água e temperatura no local em que estão crescendo. O suprimento inadequado de um desses fatores pode reduzir o vigor da planta e limitar seu desenvolvimento. O presente trabalho teve como objetivo avaliar os efeitos do nível de sombreamento no crescimento e a concentração de pigmentos fotossintéticos em duas espécies de leguminosas arbóreas, Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. e Enterolobium contortisiliquum (Vell. Morong. O experimento foi conduzido no Setor de Olericultura do Centro Universitário Luterano de Ji-Paraná (CEULJI/ULBRA/Rondônia. Durante a formação das mudas, ambas as espécies foram expostas a quatro tratamentos de sombra: 0 % (controle - sol pleno; 30 %; 50 % e 80 %. Cada tratamento foi constituído com três repetições de cada espécie; o delineamento experimental foi inteiramente casualisado. Quatro meses após a semeadura, as seguintes análises foram realizadas: número de folhas, altura da planta, comprimento do sistema radicular, massa seca total e concentração de pigmentos fotossintéticos. O tratamento sob sol pleno afetou negativamente o crescimento de ambas as espécies. As mudas crescidas sob 50% e 80% apresentaram melhor desenvolvimento. Conforme o aumento do sombreamento houve um decréscimo na razão clorofila a/b e um aumento nas concentrações de clorofila total e carotenóides totais.Hymenaea courbaril L. var. stilbocarpa (Hayne Lee et Lang. is a clímax shadow tolerant specie and Enterolobium contortisiliquum (Vell. Morong., by the other hand, is considered as a pioneer specie. The development of these species may reflect its adaptation ability to different environmental

  10. Size dependence of the polarizability and Haynes rule for an exciton bound to an ionized donor in a single spherical quantum dot

    Energy Technology Data Exchange (ETDEWEB)

    Feddi, E., E-mail: e.feddi@um5s.net.ma; Zouitine, A. [Université Mohamed V Souissi, Ecole Normale Supérieure de l' Enseignement Technique (ENSET), Rabat (Morocco); Oukerroum, A.; Zazoui, M. [Laboratory of Condensed Matter, Faculty of Sciences and Techniques, University of Hassan II-Mohammedia, B.P. 146, 20800 Mohammedia (Morocco); Dujardin, F. [LCP-A2MC, Université de Lorraine, ICPM, 1 Bd Arago, 57070 Metz (France); Assaid, E. [Laboratoire d' Électronique et Optique des Nanostructures de Semiconducteurs, Faculté des Sciences, B. P. 20, El Jadida (Morocco)

    2015-02-14

    We study the effect of an external electric field on an exciton bound to an ionized donor (D{sup +}, X) confined in a spherical quantum dot using a perturbative-variational method where the wave function and energy are developed in series of powers of the electric field strength. After testing this new approach in the determination of the band gap for some semiconductor materials, we generalize it to the case of (D{sup +}, X) in the presence of the electric field and for several materials ZnO, PbSe, and InAs, with significant values of the mass ratio. Three interesting results can be deduced: First, we show that the present method allows to determine the ground state energy in the presence of a weak electric field in a simple way (E = E{sub 0} − αf{sup 2}) using the energy without electric field E{sub 0} and the polarizability α. The second point is that our theoretical predictions show that the polarizability of (D{sup +}, X) varies proportionally to R{sup 3.5} and follows an ordering α{sub D{sup 0}}<α{sub X}<α{sub (D{sup +},X)}. The last point to highlight is that the Haynes rule remains valid even in the presence of a weak electric field.

  11. Size dependence of the polarizability and Haynes rule for an exciton bound to an ionized donor in a single spherical quantum dot

    International Nuclear Information System (INIS)

    Feddi, E.; Zouitine, A.; Oukerroum, A.; Zazoui, M.; Dujardin, F.; Assaid, E.

    2015-01-01

    We study the effect of an external electric field on an exciton bound to an ionized donor (D + , X) confined in a spherical quantum dot using a perturbative-variational method where the wave function and energy are developed in series of powers of the electric field strength. After testing this new approach in the determination of the band gap for some semiconductor materials, we generalize it to the case of (D + , X) in the presence of the electric field and for several materials ZnO, PbSe, and InAs, with significant values of the mass ratio. Three interesting results can be deduced: First, we show that the present method allows to determine the ground state energy in the presence of a weak electric field in a simple way (E = E 0  − αf 2 ) using the energy without electric field E 0 and the polarizability α. The second point is that our theoretical predictions show that the polarizability of (D + , X) varies proportionally to R 3.5 and follows an ordering α D 0 <α X <α (D + ,X) . The last point to highlight is that the Haynes rule remains valid even in the presence of a weak electric field

  12. Presence of Human Herpesvirus 6B in the Pancreas of Subjects With and Without Type 1 Diabetes.

    Science.gov (United States)

    Ericsson, Maja; Skog, Oskar

    The aims of this study were to investigate the presence of human herpesvirus 6 (HHV6) A and B in human pancreata and to search for signs of active infection in this organ of subjects with and without type 1 diabetes (T1D). Pancreata from brain-dead organ donors with and without T1D were examined for the presence of HHV6 genomic sequences by polymerase chain reaction (PCR), transcripts by reverse transcriptase-PCR, and protein by immunohistochemistry. Quantitative PCR of isolated pancreatic islets and exocrine cell clusters was used to determine the intrapancreatic location of HHV6 DNA. Human herpesvirus 6B genomic sequences were present in 1 of 2 donors who died of acute-onset T1D, 4 of 6 donors with long-standing T1D, and 9 of 12 nondiabetic donors. Higher copy numbers of HHV6B DNA were present in isolated islets than in exocrine tissue from the same donors. No signs of active HHV6 transcription were found. Human herpesvirus 6A was not present in any tested pancreas. The herein presented data demonstrate, for the first time, the presence of a latent HHV6B infection in the pancreas and islets of Langerhans. Whether this virus can contribute to disease in the pancreas remains to be determined.

  13. Recubrimiento de Stellite 6 sobre acero inoxidable realizado con láser de CO2 para válvulas de escape de motores diesel

    Directory of Open Access Journals (Sweden)

    Cadenas, M.

    2002-12-01

    Full Text Available To reduce the recovery or the replacement costs of diesel engine exhaust valves, they are manufactured with an economic base material, and a coating which is deposited on the seat valve in order to reach high hardness and good impact, corrosion and high temperature wear resistance (>550 °C and without lubrication. In this work, appropriate laser cladding parameters have been determined to obtain Stellite 6 coatings over AISI 304 steel (as plane test specimens and SAE EV8 steel (as valves substrates. One and two superimposed tracks were deposited on the seat valves, and modifying the laser power as a function of the rotated angle at the beginning and the end of the circular tracks, pores and cracks have been minimized and the thickness of the track were made uniform. Hardness, dilution and final microstructure of the different coatings have been analysed. A 10 % dilution and 550 HV in the tracks over plane test specimens was observed, while valves with one track showed 25 % and 430 HV respectively. With two superimposed tracks the hardness was up to 470 HV in the upper track.

    Para abaratar el coste de recuperación o sustitución de válvulas de escape en motores diesel, estas se fabrican con un material base económico, recubriéndose el asiento de la válvula con otro material al que se exigirá elevada dureza y buena resistencia al impacto, a la corrosión y al desgaste erosivo en caliente (>550 °C y sin lubricación. Partiendo de esta idea, en el presente trabajo se han determinado los parámetros adecuados para realizar, mediante la técnica de plaqueado láser, un recubrimiento con Stellite 6, sobre sustratos de acero AISI 304 (probetas planas y SAE EV8 (válvulas reales. Sobre las válvulas, se depositaron uno y dos cordones superpuestos, se minimizó la presencia de poros y grietas, modificando el grado de solape inicial y final de los cordones circulares y la potencia en función del ángulo girado. Así, se

  14. Novel marmoset (Callithrix jacchus model of human Herpesvirus 6A and 6B infections: immunologic, virologic and radiologic characterization.

    Directory of Open Access Journals (Sweden)

    Emily Leibovitch

    2013-01-01

    Full Text Available Human Herpesvirus 6 (HHV-6 is a ubiquitous virus with an estimated seroprevalence of 95% in the adult population. HHV-6 is associated with several neurologic disorders, including multiple sclerosis, an inflammatory demyelinating disease affecting the CNS. Animal models of HHV-6 infection would help clarify its role in human disease but have been slow to develop because rodents lack CD46, the receptor for cellular entry. Therefore, we investigated the effects of HHV-6 infections in a non-human primate, the common marmoset Callithrix jacchus. We inoculated a total of 12 marmosets with HHV-6A and HHV-6B intravenously and HHV-6A intranasally. Animals were monitored for 25 weeks post-inoculation clinically, immunologically and by MRI. Marmosets inoculated with HHV-6A intravenously exhibited neurologic symptoms and generated virus-specific antibody responses, while those inoculated intravenously with HHV-6B were asymptomatic and generated comparatively lower antibody responses. Viral DNA was detected at a low frequency in paraffin-embedded CNS tissue of a subset of marmosets inoculated with HHV-6A and HHV-6B intravenously. When different routes of HHV-6A inoculation were compared, intravenous inoculation resulted in virus-specific antibody responses and infrequent detection of viral DNA in the periphery, while intranasal inoculation resulted in negligible virus-specific antibody responses and frequent detection of viral DNA in the periphery. Moreover, marmosets inoculated with HHV-6A intravenously exhibited neurologic symptoms, while marmosets inoculated with HHV-6A intranasally were asymptomatic. We demonstrate that a marmoset model of HHV-6 infection can serve to further define the contribution of this ubiquitous virus to human neurologic disorders.

  15. Identification of two new mutations in the GPR98 and the PDE6B genes segregating in a Tunisian family.

    Science.gov (United States)

    Hmani-Aifa, Mounira; Benzina, Zeineb; Zulfiqar, Fareeha; Dhouib, Houria; Shahzadi, Amber; Ghorbel, Abdelmonem; Rebaï, Ahmed; Söderkvist, Peter; Riazuddin, Sheikh; Kimberling, William J; Ayadi, Hammadi

    2009-04-01

    Autosomal recessive retinitis pigmentosa (ARRP) is a genetically heterogeneous disorder. ARRP could be associated with extraocular manifestations that define specific syndromes such as Usher syndrome (USH) characterized by retinal degeneration and congenital hearing loss (HL). The USH type II (USH2) associates RP and mild-to-moderate HL with preserved vestibular function. At least three genes USH2A, the very large G-protein-coupled receptor, GPR98, and DFNB31 are responsible for USH2 syndrome. Here, we report on the segregation of non-syndromic ARRP and USH2 syndrome in a consanguineous Tunisian family, which was previously used to define USH2B locus. With regard to the co-occurrence of these two different pathologies, clinical and genetic reanalysis of the extended family showed (i) phenotypic heterogeneity within USH2 patients and (ii) excluded linkage to USH2B locus. Indeed, linkage analysis disclosed the cosegregation of the USH2 phenotype with the USH2C locus markers, D5S428 and D5S618, whereas the ARRP perfectly segregates with PDE6B flanking markers D4S3360 and D4S2930. Molecular analysis revealed two new missense mutations, p.Y6044C and p.W807R, occurring in GPR98 and PDE6B genes, respectively. In conclusion, our results show that the USH2B locus at chromosome 3p23-24.2 does not exist, and we therefore withdraw this locus designation. The combination of molecular findings for GPR98 and PDE6B genes enable us to explain the phenotypic heterogeneity and particularly the severe ocular affection first observed in one USH2 patient. This report presents an illustration of how consanguinity could increase familial clustering of multiple hereditary diseases within the same family.

  16. Avaliação in vitro da atividade antibacteriana de um cimento odontológico à base de óleo-resina de Copaifera multijuga Hayne

    Directory of Open Access Journals (Sweden)

    Kátia Regina Felizardo Vasconcelos

    Full Text Available Um dos materiais utilizados para a adequação do meio bucal no serviço público é o cimento produzido a partir de óxido de zinco e eugenol. Entretanto, o eugenol é uma substância citotóxica que pode desencadear alguns efeitos adversos. Por essa razão, procura-se substituir o eugenol por uma substância que apresente baixa toxicidade, mantendo ou mesmo melhorando as propriedades do cimento. O óleo-resina de copaíba é um produto natural, utilizado pelas populações amazônicas e reconhecido por suas propriedades medicinais. Baseando-se nas propriedades desse óleo-resina, na ação antimicrobiana comprovada do hidróxido de cálcio e na ação anti-séptica do óxido de zinco, propôs-se formular um cimento odontológico obtido da associação do ZnO, Ca(OH2 e óleo-resina de Copaifera multijuga Hayne e avaliar sua atividade antibacteriana através do teste de diluição em meio líquido frente às cepas padrão de Streptococcus mutans (ATCC 25175 e S. sanguinis (ATCC 15300. Nesse ensaio, utilizaram-se os seguintes grupos experimentais: o cimento contendo ZnO, Ca(OH2 e óleo-resina de copaíba (G1 e cada um dos constituintes isoladamente, ZnO (G2, Ca(OH2 (G3 e óleo-resina de copaíba (G4. Todos os grupos analisados demonstraram atividade antibacteriana, o G4 apresentou os melhores resultados e o G1 mostrou-se um cimento promissor a ser utilizado em odontologia.

  17. Human CD134 (OX40) expressed on T cells plays a key role for human herpesvirus 6B replication after allogeneic hematopoietic stem cell transplantation.

    Science.gov (United States)

    Nagamata, Satoshi; Nagasaka, Miwako; Kawabata, Akiko; Kishimoto, Kenji; Hasegawa, Daiichiro; Kosaka, Yoshiyuki; Mori, Takeshi; Morioka, Ichiro; Nishimura, Noriyuki; Iijima, Kazumoto; Yamada, Hideto; Kawamoto, Shinichiro; Yakushijin, Kimikazu; Matsuoka, Hiroshi; Mori, Yasuko

    2018-05-01

    CD134 (OX40), which is a cellular receptor for human herpesvirus-6B (HHV-6B) and expresses on activated T cells, may play a key role for HHV-6B replication after allogeneic hematopoietic stem cell transplantation (allo-HSCT). Therefore, we examined the CD134 expression on T cells and HHV-6B replication after allo-HSCT, and analyzed the correlation between them. Twenty-three patients after allo-HSCT were enrolled. The percentages of CD134-positive cells within the CD4 + and CD8 + cell populations were measured by flow cytometry, and the viral copy number of HHV-6B was simultaneously quantified by real-time PCR. The correlation between CD134 and HHV-6B viral load was then statistically analyzed. HHV-6B reactivation occurred in 11 of 23 patients (47.8%). CD134 expression was seen on T cells and was coincident with the time of peak viral load. The percentage of CD134-positive cells decreased significantly when HHV-6B DNA disappeared (p = .005 in CD4 + T cells, p = .02 in CD8 + T cells). In the 4 patients who underwent umbilical cord blood transplantation (UCBT), the viral load varied with the percentage of CD134-positive cells. In the comparison between the HHV-6B reactivation group and non-reactivation group, maximum percentages of CD134-positive cells among CD4 + T cells in reactivation group were significantly higher than those in non-reactivation group (p = .04). This is the first study to show that a correlation of CD134 expression on T cells with HHV-6B replication after allo-HSCT, especially in UCBT. The results possibly indicate that CD134 on T cells plays a key role for HHV-6B replication after allo-HSCT. Copyright © 2018 Elsevier B.V. All rights reserved.

  18. The H3K27me3 demethylase, KDM6B, is induced by Epstein-Barr virus and over-expressed in Hodgkin's Lymphoma

    DEFF Research Database (Denmark)

    Anderton, J A; Bose, S; Vockerodt, M

    2011-01-01

    ), an Epstein-Barr virus (EBV) associated malignancy. KDM6B is over-expressed in primary HL and induced by the EBV oncogene, latent membrane protein (LMP1) in GC B cells, the presumptive progenitors of HL. Consistent with these observations, we found that KDM6B transcriptional targets in GC B cells are enriched...

  19. Human herpesvirus 6B induces phosphorylation of p53 in its regulatory domain by a CK2- and p38-independent pathway

    DEFF Research Database (Denmark)

    Øster, Bodil; Bundgaard, B; Hupp, T R

    2008-01-01

    Here, we demonstrate that human herpesvirus 6B (HHV-6B) infection upregulates the tumour suppressor p53 and induces phosphorylation of p53 at Ser392. Interestingly, phosphorylation at the equivalent site has previously been shown to correlate with p53 tumour suppression in murine models. Although...

  20. [HPV DNA vaccines expressing recombinant CRT/HPV6bE7 fusion protein inhibit tumor growth and angiogenic activity].

    Science.gov (United States)

    Xu, Yan; Cheng, Hao; Zhao, Ke-Jia; Zhu, Ke-Jian; Zhang, Xing

    2007-11-01

    This paper was to study the angiogenic inhibitory effect and the potential antitumor effect of the constructed recombinant DNA vaccine CRT/HPV6bE7 in vivo. The C57BL/6 mice were vaccinated respectively with recombinant CRT/HPV6bE7 DNA plamids. The inhibitory effects on angiogenesis of generated vaccines in vivo were evaluated by a bFGF-induced angiogenesis assay using the Matrigel kit. To investigate the potential antitumor effect, the mean tumor weights, sizes and tumor appearing times were measured in C57BL/6 mice treated with HPV6bE7-expressing B16 cells. The results indicated that the recombinants CRT180/HPV6bE7 and CRT180 showed strong anti-angiogenic effects in bFGF-induced angiogenesis in vivo. Moreover, CRT180/HPV6bE7 and CRT180 DNA vaccines could significantly inhibit the tumor growth in tumor challenge experiment, and CRT180/HPV6bE7 was superior to other vaccines in delaying tumor formation time, limiting tumor size and weight in tumor protection experiment. In conclusion, recombinant CRT180/HPV6bE7 DNA could elicit a most efficient anti-angiogenic effect and inhibit tumor growth in mice inoculated with DNA vaccines. The antiangiogenic activity of CRT were suggested residing in a domain between CRT 120-180 aa.

  1. Natural history-driven, plant-mediated RNAi-based study reveals CYP6B46's role in a nicotine-mediated antipredator herbivore defense.

    Science.gov (United States)

    Kumar, Pavan; Pandit, Sagar S; Steppuhn, Anke; Baldwin, Ian T

    2014-01-28

    Manduca sexta (Ms) larvae are known to efficiently excrete ingested nicotine when feeding on their nicotine-producing native hostplant, Nicotiana attenuata. Here we describe how ingested nicotine is co-opted for larval defense by a unique mechanism. Plant-mediated RNAi was used to silence a midgut-expressed, nicotine-induced cytochrome P450 6B46 (CYP6B46) in larvae consuming transgenic N. attenuata plants producing MsCYP6B46 dsRNA. These and transgenic nicotine-deficient plants were planted into native habitats to study the phenotypes of larvae feeding on these plants and the behavior of their predators. The attack-behavior of a native wolf spider (Camptocosa parallela), a major nocturnal predator, provided the key to understanding MsCYP6B46's function: spiders clearly preferred CYP6B46-silenced larvae, just as they had preferred larvae fed nicotine-deficient plants. MsCYP6B46 redirects a small amount (0.65%) of ingested nicotine from the midgut into hemolymph, from which nicotine is exhaled through the spiracles as an antispider signal. CYP6B46-silenced larvae were more susceptible to spider-attack because they exhaled less nicotine because of lower hemolymph nicotine concentrations. CYP6B46-silenced larvae were impaired in distributing ingested nicotine from midgut to hemolymph, but not in the clearing of hemolymph nicotine or in the exhalation of nicotine from hemolymph. MsCYP6B46 could be a component of a previously hypothesized pump that converts nicotine to a short-lived, transportable, metabolite. Other predators, big-eyed bugs, and antlion larvae were insensitive to this defense. Thus, chemical defenses, too toxic to sequester, can be repurposed for defensive functions through respiration as a form of defensive halitosis, and predators can assist the functional elucidation of herbivore genes.

  2. Construction, expression, and function of 6B11ScFv-mIL-12, a fusion protein that attacks human ovarian carcinoma.

    Science.gov (United States)

    Cheng, Hongyan; Ye, Xue; Chang, Xiaohong; Ma, Ruiqiong; Cong, Xu; Niu, Yidong; Zhang, Menglei; Liu, Kai; Cui, Heng; Sang, Jianli

    2015-04-01

    We previously produced an anti-idiotypic monoclonal antibody, 6B11, which mimics ovarian cancer antigen CA166-9 and induces cellular and humoral immunity. Here, to enhance the immunogenicity of 6B11, we constructed the 6B11ScFv-mIL-12 fusion protein (FP), by fusing single-chain fragment of 6B11 variable region (6B11ScFv) with mouse interleukin-12 (mIL-12), which was expressed in eukaryotic 293EBNA cells transfected with pSBI vectors. A binding activity assay showed 6B11ScFv-mIL-12 to have activities of both 6B11 and mIL-12-it specifically bound both ovarian monoclonal antibody COC166-9 and rabbit anti-mouse IL-12 antibody. The immune activity assay showed 6B11ScFv-mIL-12 to promote proliferation of lymphocytes stimulated by phytohemagglutinin, increase the absolute numbers and percentages of CD3(-)/CD56(+) natural killer cells and CD3(+)/CD56(+) natural killer T cells among peripheral lymphocytes, and increase interferon-γ. The FP was specifically cytotoxic to the CA166-9(+) ovarian cancer cell lines HOC1A and SKOV3 and inhibited growth of ID8 subcutaneous tumors in C57BL/6J mice. This study provides an experimental basis for clinical use of 6B11ScFv-mIL-12 in ovarian cancer therapy. To our knowledge, this is the first report of a fusion protein from an anti-idiotypic antibody and IL-12.

  3. Optimization of headspace solid-phase microextraction for analysis of {beta}-caryophyllene in a nanoemulsion dosage form prepared with copaiba (Copaifera multijuga Hayne) oil

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Daiane de O; Colombo, Mariana; Kelmann, Regina G. [Programa de Pos-Graduacao em Ciencias Farmaceuticas, Faculdade de Farmacia, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS, Av. Ipiranga, 2752, CEP 90610-000 (Brazil); De Souza, Tatiane P. [Programa de Pos-Graduacao em Ciencias Farmaceuticas, Universidade Federal do Amazonas, Manaus, Amazonas (Brazil); Bassani, Valquiria L.; Teixeira, Helder F. [Programa de Pos-Graduacao em Ciencias Farmaceuticas, Faculdade de Farmacia, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS, Av. Ipiranga, 2752, CEP 90610-000 (Brazil); Veiga, Valdir F. [Departamento de Quimica, Instituto de Ciencias Exatas, UFAM, Av. Gal. Rodrigo Octavio, 6.200 - Japiim, 69.079-000, Manaus - AM (Brazil); Limberger, Renata P. [Programa de Pos-Graduacao em Ciencias Farmaceuticas, Faculdade de Farmacia, Universidade Federal do Rio Grande do Sul, Porto Alegre, RS, Av. Ipiranga, 2752, CEP 90610-000 (Brazil); and others

    2012-04-06

    Highlights: Black-Right-Pointing-Pointer A SPME-CG method is proposed for {beta}-caryophyllene assay in nanoemulsions containing copaiba oil. Black-Right-Pointing-Pointer SPME parameters were optimized for efficient {beta}-caryophyllene extraction. Black-Right-Pointing-Pointer The stability-indicating capability and specificity of the method were satisfied. Black-Right-Pointing-Pointer Nanoemulsions partially protected {beta}-caryophyllene under stressing conditions. Black-Right-Pointing-Pointer The proposed method presents linearity, lows LOD and LOQ, good precision, accuracy and robustness. - Abstract: Recent studies have shown the anti-inflammatory activity of Copaiba oils may be addressed to the high content of {beta}-caryophyllene, the most common sesquiterpene detected, especially in the Copaifera multijuga Hayne species. In the present study, nanoemulsions were proposed as a delivery system for copaiba oil in view to treat locally inflamed skin. This article describes the optimization and validation of a stability-indicating SPME-GC method, for {beta}-caryophyllene analysis in the nanoemulsions produced by high pressure homogenization. SPME methods are performed with PDMS (polydimethylsiloxane) fiber (100 {mu}m). Three SPME parameters were evaluated by a three-level-three-factor Box-Behnken factorial design as potentially affecting the technique efficiency. According to the results obtained, the best conditions to extract {beta}-caryophyllene were: (i) sampling temperature of 45 Degree-Sign C, (ii) sampling time of 20 min and (iii) no NaCl addition. Results coming from the forced degradation tests showed a reduction of {beta}-caryophyllene peak area when both caryophyllene methanolic solution and nanoemulsions were exposed to acid hydrolysis, UV-A irradiation, oxidative (H{sub 2}O{sub 2}) and thermolitic (60 Degree-Sign C) conditions. Such reduction occurred in lower extent in the nanoemulsions, suggesting a protective effect of the formulation to {beta

  4. Optimization of headspace solid-phase microextraction for analysis of β-caryophyllene in a nanoemulsion dosage form prepared with copaiba (Copaifera multijuga Hayne) oil

    International Nuclear Information System (INIS)

    Dias, Daiane de O; Colombo, Mariana; Kelmann, Regina G.; De Souza, Tatiane P.; Bassani, Valquiria L.; Teixeira, Helder F.; Veiga, Valdir F.; Limberger, Renata P.

    2012-01-01

    Highlights: ► A SPME-CG method is proposed for β-caryophyllene assay in nanoemulsions containing copaiba oil. ► SPME parameters were optimized for efficient β-caryophyllene extraction. ► The stability-indicating capability and specificity of the method were satisfied. ► Nanoemulsions partially protected β-caryophyllene under stressing conditions. ► The proposed method presents linearity, lows LOD and LOQ, good precision, accuracy and robustness. - Abstract: Recent studies have shown the anti-inflammatory activity of Copaiba oils may be addressed to the high content of β-caryophyllene, the most common sesquiterpene detected, especially in the Copaifera multijuga Hayne species. In the present study, nanoemulsions were proposed as a delivery system for copaiba oil in view to treat locally inflamed skin. This article describes the optimization and validation of a stability-indicating SPME-GC method, for β-caryophyllene analysis in the nanoemulsions produced by high pressure homogenization. SPME methods are performed with PDMS (polydimethylsiloxane) fiber (100 μm). Three SPME parameters were evaluated by a three-level-three-factor Box–Behnken factorial design as potentially affecting the technique efficiency. According to the results obtained, the best conditions to extract β-caryophyllene were: (i) sampling temperature of 45 °C, (ii) sampling time of 20 min and (iii) no NaCl addition. Results coming from the forced degradation tests showed a reduction of β-caryophyllene peak area when both caryophyllene methanolic solution and nanoemulsions were exposed to acid hydrolysis, UV-A irradiation, oxidative (H 2 O 2 ) and thermolitic (60 °C) conditions. Such reduction occurred in lower extent in the nanoemulsions, suggesting a protective effect of the formulation to β-caryophyllene content. Since no degradation products were detected in the same retention time of β-caryophyllene, the specificity of the method was demonstrated. The method was linear in

  5. Human Herpesvirus 6B Induces Hypomethylation on Chromosome 17p13.3, Correlating with Increased Gene Expression and Virus Integration.

    Science.gov (United States)

    Engdahl, Elin; Dunn, Nicky; Niehusmann, Pitt; Wideman, Sarah; Wipfler, Peter; Becker, Albert J; Ekström, Tomas J; Almgren, Malin; Fogdell-Hahn, Anna

    2017-06-01

    Human herpesvirus 6B (HHV-6B) is a neurotropic betaherpesvirus that achieves latency by integrating its genome into host cell chromosomes. Several viruses can induce epigenetic modifications in their host cells, but no study has investigated the epigenetic modifications induced by HHV-6B. This study analyzed methylation with an Illumina 450K array, comparing HHV-6B-infected and uninfected Molt-3 T cells 3 days postinfection. Bisulfite pyrosequencing was used to validate the Illumina results and to investigate methylation over time in vitro Expression of genes was investigated using quantitative PCR (qPCR), and virus integration was investigated with PCR. A total of 406 CpG sites showed a significant HHV-6B-induced change in methylation in vitro Remarkably, 86% (351/406) of these CpGs were located integration in Molt-3 cell DNA 3 days after infection. The telomere at 17p has repeatedly been described as an integration site for HHV-6B, and we show for the first time that HHV-6B induces hypomethylation in this region during acute infection, which may play a role in the integration process, possibly by making the DNA more accessible. IMPORTANCE The ability to establish latency in the host is a hallmark of herpesviruses, but the mechanisms differ. Human herpesvirus 6B (HHV-6B) is known to establish latency through integration of its genome into the telomeric regions of host cells, with the ability to reactivate. Our study is the first to show that HHV-6B specifically induces hypomethylated regions close to the telomeres and that integrating viruses may use the host methylation machinery to facilitate their integration process. The results from this study contribute to knowledge of HHV-6B biology and virus-host interaction. This in turn will lead to further progress in our understanding of the underlying mechanisms by which HHV-6B contributes to pathological processes and may have important implications in both disease prevention and treatment. Copyright © 2017 American

  6. Summary of the 10th International Conference on Human Herpesviruses-6 and -7 (HHV-6A, -6B, and HHV-7).

    Science.gov (United States)

    Komaroff, Anthony L; Boeckh, Michael; Eliason, Eva; Phan, Tuan; Kaufer, Benedikt B

    2018-04-01

    The 10th International Conference on Human herpesviruses-6 and -7 (HHV-6A, HHV-6B, and HHV-7) was held at the Freie Universität, Berlin, Germany from July 23-26, 2017. It attracted more than 130 basic, translational and clinical scientists from 19 countries. Important new information was presented regarding: the biology of HHV-6A and -6B; the biology and epidemiology of inherited chromosomally integrated HHV-6A and -6B; improved diagnostic tests; animal models for and animal viruses with similarities to HHV-6A, -6B, and -7; established and possible disease associations; and new treatment strategies. Here, we summarize work presented at the meeting that is of particular interest. © 2017 Wiley Periodicals, Inc.

  7. Cytochrome c6B of Synechococcus sp. WH 8102 – Crystal structure and basic properties of novel c6-like family representative

    International Nuclear Information System (INIS)

    Zatwarnicki, Pawel; Barciszewski, Jakub; Krzywda, Szymon; Jaskolski, Mariusz; Kolesinski, Piotr; Szczepaniak, Andrzej

    2014-01-01

    Highlights: • Crystal structure of cytochrome c 6B from Synechococcus sp. WH 8102 was solved. • Basic biophysical properties of cytochrome c 6B were determined. • Cytochrome c 6B exhibits similar architecture to cytochrome c 6 . • Organization of heme binding pocket of cytochrome c 6B differs from that of c 6 . • Midpoint potential of cytochrome c 6B is significantly lower than of cytochrome c 6 . - Abstract: Cytochromes c are soluble electron carriers of relatively low molecular weight, containing single heme moiety. In cyanobacteria cytochrome c 6 participates in electron transfer from cytochrome b 6 f complex to photosystem I. Recent phylogenetic analysis revealed the existence of a few families of proteins homologous to the previously mentioned. Cytochrome c 6A from Arabidopsis thaliana was identified as a protein responsible for disulfide bond formation in response to intracellular redox state changes and c 550 is well known element of photosystem II. However, function of cytochromes marked as c 6B , c 6C and c M as well as the physiological process in which they take a part still remain unidentified. Here we present the first structural and biophysical analysis of cytochrome from the c 6B family from mesophilic cyanobacteria Synechococcus sp. WH 8102. Purified protein was crystallized and its structure was refined at 1.4 Å resolution. Overall architecture of this polypeptide resembles typical I-class cytochromes c. The main features, that distinguish described protein from cytochrome c 6 , are slightly red-shifted α band of UV–Vis spectrum as well as relatively low midpoint potential (113.2 ± 2.2 mV). Although, physiological function of cytochrome c 6B has yet to be determined its properties probably exclude the participation of this protein in electron trafficking between b 6 f complex and photosystem I

  8. ANALYSIS OF STRUCTURAL ELEMENT OF FAMILY 6 CARBOHYDRATE BINDING MODULE (CTCBM6B OF ALPHA-L-ARABINOFURANOSIDASE FROM CLOSTRIDIUM THERMOCELLUM

    Directory of Open Access Journals (Sweden)

    Shadab Ahmed

    2013-06-01

    Full Text Available The amino acid sequence of a family 6 carbohydrate binding module (CtCBM6B from Clostridium thermocellum alpha-L-arabinofuranosidase showed close evolutionary relationship with some other member of family 6 carbohydrate binding modules. The CD spectrum analysis confirmed the secondary structure prediction of CtCBM6B as both showed beta-sheets (44-48% and random coils (52-54% and no alpha-helix. The hydrogen bonding plot of CtCBM6B showed many segments of parallel and anti-parallel beta-strands which was similar to the secondary structure prediction by PSIPRED VIEW. The three dimensional structure of CtCBM6B generated by MODELLER revealed a typical beta-sandwich architecture at its core, characteristic of beta-jelly roll CBM superfamily. The Ramachandran plot analysis by PROCHECK showed that out of 134 residues, 92.9% were in most favoured region, 6.2% in additionally allowed region and only 0.9% in generously allowed region which indicated a stable conformation of 3D model of CtCBM6B. The docking analysis of CtCBM6B for finding putative ligand binding sites showed that it has high binding affinity for arabinobiose, beta-L-arabinofuranose and beta-D-xylopyranose indicated by lower ligand binding energy (-14.28 kcal mol–1, -12.5 kcal mol–1 and -11.3 kcal mol–1, respectively. CtCBM6B also showed appreciable binding affinity with alpha-D-xylopyranose (–10.8 kcal mol–1, beta-L-arabinopyranose (–10.2 kcal mol-1, alpha-L-arabinopyranose (–10.0 kcal mol–1 and alpha-L-arabinofuranose (–8.75 kcal mol–1. The results indicated that CtCBM6B has high potential for binding arabinan, xylans and substituted xylans.

  9. Avaliação do efeito antifúngico do óleo resina e do óleo essencial de copaíba (Copaifera multijuga Hayne Evaluation of the antifungal effect of oleoresin and essential oil of copaiba (Copaifera multijuga Hayne

    Directory of Open Access Journals (Sweden)

    R.J.A Deus

    2011-01-01

    Full Text Available Óleo de Copaifera multijuga Hayne, in natura e as frações foram avaliados quanto às suas atividades fungitóxicas, frente a cinco espécies de fungos filamentosos do gênero Aspergillus e três espécies de leveduras do gênero Candida. Concentrações de óleo resina e de óleo essencial na faixa de 0,08 mg mL-1a 1,6 mg mL-1 foram usadas para as análises qualitativa e quantitativas. As amostras foram dispostas sobre discos de papel de 5 mm de diâmetro e distribuídos sobre o meio Saboraud em placas de Petri, inoculadas com esporos dos microrganismos e incubadas a 28ºC durante 10 dias. Utilizou-se uma solução com 1,6 mg mL-1 de nitrato de miconazol como controle positivo. Os resultados qualitativos mostraram que o óleo resina apresentou boa atividade, porém uma das frações do óleo essencial se mostrou altamente efetivo contra C. parapsilosis IOC - 2882, A.flavus IOC-3874 e A. tamarii IOC-187 com halos de inibição de 16,0±1,4 mm, 19,5±2,1 mm e 12,5±3,5 mm, respectivamente. Já a avaliação quantitativa mostrou que 0,3 mg mL-1 do óleo resina inibiu o crescimento de A. flavus e C. parapsilosis, enquanto que 0,08 mg mL-1 da fração do óleo essencial atingiu esta mesma atividade.Copaifera multijuga Hayne oil in natura and its fractions were evaluated as to their fungitoxic activities against five filamentous fungus species belonging to the genus Aspergillus and three yeast species of the genus Candida. Oleoresin and essential oil concentrations ranging from 0.08 mg mL-1 to 1.6 mg mL-1 were used for qualitative and quantitative analyses. The samples were placed onto 5mm-diameter paper discs distributed on Sabouraud's medium in Petri dishes inoculated with spores of the microorganisms and incubated at 28ºC for 10 days. A solution containing 1.6 mg mL-1 miconazole nitrate was used as positive control. Qualitative results showed that the oleoresin presented good activity, while a fraction of the essential oil was highly effective

  10. Efeito fungitóxico in vitro do óleo resina e do óleo essencial de copaíba (Copaifera multijuga Hayne In vitro fungitoxic effect of the oil-resin and the essential oil of copaiba (Copaifera multijuga Hayne

    Directory of Open Access Journals (Sweden)

    R.J.A. Deus

    2009-01-01

    Full Text Available Óleo de Copaifera multijuga Hayne, in natura e as frações foram avaliadas quanto às atividades fungitóxicas in vitro, frente a cinco espécies de fungos filamentosos do gênero Aspergillus e três espécies de leveduras do gênero Candida. Concentrações de óleo resina e de óleo essencial na faixa de 0,08 mg mL-1 a 1,6 mg mL-1 foram usadas para as análises qualitativa e quantitativas. As amostras foram dispostas sobre discos de papel de 5 mm de diâmetro e distribuídos sobre o meio Saboraud em placas de Petri, inoculadas com esporos dos microorganismos e incubadas a 28ºC durante 10 dias. Utilizou-se solução com 1,6 mg mL-1 de nitrato de miconazol como controle positivo. Os resultados qualitativos mostraram que o óleo resina apresentou boa atividade fungistática, porém uma das frações do óleo essencial se mostrou altamente efetiva contra Candida parapsilosis IOC-2882, Aspergillus flavus IOC-3874 e A tamarii IOC-187 com halos de inibição de 16,0±1,4 mm, 19,5±2,1 mm e 12,5±3,5 mm, respectivamente. Já a avaliação quantitativa mostrou que 0,3 mg mL-1 do óleo resina inibiu o crescimento de A. flavus e C. parapsilosis, enquanto que 0,08 mg mL-1 da fração do óleo essencial atingiu esta mesma atividade.Copaifera multijuga Hayne oil, crude and fractions, was evaluated for its in vitro fungitoxic activities against five species of filamentous fungi belonging to the genus Aspergillus and three yeast species of the genus Candida. Oil-resin and essential oil concentrations ranging from 0.008 mg mL-1 to 1.6 mg mL-1 were used in qualitative and quantitative analyses. Samples were placed onto 5mm-diameter paper disks and distributed on Saboraud culture medium in Petri dishes inoculated with conidia and incubated at 28ºC during 10 days. A solution with 1.6 mg mL-1 of miconazole nitrate was used as positive control. Qualitative results indicated that the oil-resin presented good fungistatic activity; however, one of the essential

  11. Anatomia dos órgãos vegetativos de Hymenaea martiana Hayne (Caesalpinioideae-Fabaceae: espécie de uso medicinal em Caetité-BA Anatomy of vegetative organs of Hymenaea martiana Hayne (Fabaceae-Caesalpinioideae: a species of medicinal use in Caetité-Bahia State, Brazil

    Directory of Open Access Journals (Sweden)

    M.S. Silva

    2012-01-01

    Full Text Available Hymenaea martiana Hayne (Fabaceae-Caesalpinioideae apresenta grande valor na medicina popular em Caetité. A casca, entrecasca do caule e a resina, são utilizadas no tratamento de diversos males. Neste estudo são apresentadas a caracterização anatômica e histoquímica dos órgãos vegetativos. Amostras foram coletadas e processadas segundo técnicas usuais em anatomia vegetal e histoquímica. Todos os órgãos apresentam, em visão transversal, epiderme unisseriada e cavidades secretoras. Cutícula espessa ocorre em todos os órgãos aéreos. A raiz é tetrarca. Colênquima lacunar foi encontrado no caule. Bainha de fibras esclerenquimáticas envolve os feixes vasculares dos órgãos aéreos. Células pétreas ocorrem no pecíolo. Tricomas tectores ocorrem em ambas as faces da folha. A folha é hipoestomática com estômatos paracíticos e o mesofilo é dorsiventral. Cristais de oxalato de cálcio ocorrem no caule, pecíolo e lâmina foliar. Compostos fenólicos ocorrem na raiz, pecíolo e nervura central da folha. Grãos de amido ocorrem na raiz, caule e pecíolo. Lipídios ocorrem em todos os órgãos. Acredita-se que compostos fenólicos e cavidades secretoras de resina podem justificar a utilidade medicinal da espécie pela população de Caetité.Hymenaea martiana Hayne (Fabaceae-Caesalpinioideae shows a great value in folk medicine in Caetité. Its bark, stem-bark and resin are used to treat various ailments. In this study, the anatomical and histochemical characterization of vegetative organs is reported. Samples were collected and processed according to usual techniques of plant anatomy and histochemistry. All organs have, by cross-sectional view, uniseriate epidermis and secretory cavities. Thick cuticle occurs in all aerial organs. The root is tetrarch. Lacunar collenchyma was found in the stem. Sclerenchymatic sheath of fibers surrounds the vascular bundles of the aerial organs. Stone cells occur in the petiole. Trichomes occur

  12. Influence of face-centered-cubic texturing of Co2Fe6B2 pinned layer on tunneling magnetoresistance ratio decrease in Co2Fe6B2/MgO-based p-MTJ spin valves stacked with a [Co/Pd](n)-SyAF layer.

    Science.gov (United States)

    Takemura, Yasutaka; Lee, Du-Yeong; Lee, Seung-Eun; Chae, Kyo-Suk; Shim, Tae-Hun; Lian, Guoda; Kim, Moon; Park, Jea-Gun

    2015-05-15

    The TMR ratio of Co2Fe6B2/MgO-based p-MTJ spin valves stacked with a [Co/Pd]n-SyAF layer decreased rapidly when the ex situ magnetic annealing temperature (Tex) was increased from 275 to 325 °C, and this decrease was associated with degradation of the Co2Fe6B2 pinned layer rather than the Co2Fe6B2 free layer. At a Tex above 325 °C the amorphous Co2Fe6B2 pinned layer was transformed into a face-centered-cubic (fcc) crystalline layer textured from [Co/Pd]n-SyAF, abruptly reducing the Δ1 coherence tunneling of perpendicular-spin-torque electrons between the (100) MgO tunneling barrier and the fcc Co2Fe6B2 pinned layer.

  13. Synthesis and characterization of the lead borate Pb{sub 6}B{sub 12}O{sub 21}(OH){sub 6}

    Energy Technology Data Exchange (ETDEWEB)

    Schoenegger, Sandra; Ortner, Teresa S.; Wurst, Klaus; Heymann, Gunter; Huppertz, Hubert [Innsbruck Univ. (Austria). Inst. fuer Allgemeine, Anorganische und Theoretische Chemie

    2016-11-01

    A lead borate with the composition Pb{sub 6}B{sub 12}O{sub 21}(OH){sub 6} was synthesized through a hydrothermal synthesis, using lead metaborate in combination with sodium nitrate and potassium nitrate. The compound crystallizes in the trigonal, non-centrosymmetric space group P3{sub 2} (no. 145) with the lattice parameters a = 1176.0(4), c = 1333.0(4) pm, and V = 0.1596(2) nm{sup 3}. Interestingly, the data of Pb{sub 6}B{sub 12}O{sub 21}(OH){sub 6} correct the structure of a literature known lead borate with the composition ''Pb{sub 6}B{sub 11}O{sub 18}(OH){sub 9}''. For the latter compound, nearly identical lattice parameters of a = 1176.91(7) and c = 1333.62(12) pm were reported, possessing a crystal structure, in which the localization and refinement of one boron atom was obviously overlooked. The structure of Pb{sub 6}B{sub 12}O{sub 21}(OH){sub 6} is built up from trigonal planar BO{sub 3} and tetrahedral BO{sub 4} groups forming complex chains. The Pb{sup 2+} cations are located between neighboring polyborate chains. The here reported compound Pb{sub 6}B{sub 12}O{sub 21}(OH){sub 6} and ''Pb{sub 6}B{sub 11}O{sub 18}(OH){sub 9}'' were, however, produced under different synthesis conditions. While ''Pb{sub 6}B{sub 11}O{sub 18}(OH){sub 9}'' was synthesized via a hydrothermal synthesis including ethylenediamine and acetic acid, the here reported lead borate Pb{sub 6}B{sub 12}O{sub 21}(OH){sub 6} could be obtained under moderate hydrothermal conditions (240 C) without the addition of organic reagents.

  14. Inactivation of the HR6B ubiquitin-conjugating DNA repair enzyme in mice causes male sterility associated with chromatin modification.

    NARCIS (Netherlands)

    J. van Klaveren; J. de Wit (Jan); C.G. van Gurp; M.H.M. Koken (Marcel); M. Vermey; J.H. van Roijen (Jan Herman); J.T.M. Vreeburg (Jan); W.M. Baarends (Willy); D. Bootsma (Dirk); J.A. Grootegoed (Anton); J.H.J. Hoeijmakers (Jan); H.P. Roest (Henk)

    1996-01-01

    textabstractThe ubiquitin-conjugating yeast enzyme RAD6 and its human homologs hHR6A and hHR6B are implicated in postreplication repair and damage-induced mutagenesis. The yeast protein is also required for sporulation and may modulate chromatin structure via histone ubiquitination. We report the

  15. Human herpesvirus 6B U19 protein is a PML-regulated transcriptional activator that localizes to nuclear foci in a PML-independent manner

    DEFF Research Database (Denmark)

    Kofod-Olsen, Emil; Ross-Hansen, Katrine; Mikkelsen, Jacob Giehm

    2008-01-01

    Human herpesvirus 6B (HHV-6B) contains an IE-B domain spanning open reading frames U16/17-U19, based on homology with human cytomegalovirus. Here, the protein product, U19, of the HHV-6B U19 gene is identified as a 47 kDa transcriptional activator. HHV-6B infection or overexpression of U19...... transactivated the RANTES promoter. Mutational analysis of the promoter indicated that transactivation was not critically dependent on the promoter sites CRE, NF-kappaB, ISRE or NF-IL6. ND10 are nuclear substructures that are involved in several cellular regulatory pathways, including those controlling gene...... structure, U19 also localized to the centre of ND10. Knockdown of PML by small interfering RNA did not prevent U19 localization to ND10-like foci, but instead led to a fourfold increase in U19-induced transcription from the RANTES promoter. Generation of four truncated U19 proteins indicated that the N...

  16. The human vascular endothelial cell line HUV-EC-C harbors the integrated HHV-6B genome which remains stable in long term culture.

    Science.gov (United States)

    Shioda, Setsuko; Kasai, Fumio; Ozawa, Midori; Hirayama, Noriko; Satoh, Motonobu; Kameoka, Yousuke; Watanabe, Ken; Shimizu, Norio; Tang, Huamin; Mori, Yasuko; Kohara, Arihiro

    2018-02-01

    Human herpes virus 6 (HHV-6) is a common human pathogen that is most often detected in hematopoietic cells. Although human cells harboring chromosomally integrated HHV-6 can be generated in vitro, the availability of such cell lines originating from in vivo tissues is limited. In this study, chromosomally integrated HHV-6B has been identified in a human vascular endothelial cell line, HUV-EC-C (IFO50271), derived from normal umbilical cord tissue. Sequence analysis revealed that the viral genome was similar to the HHV-6B HST strain. FISH analysis using a HHV-6 DNA probe showed one signal in each cell, detected at the distal end of the long arm of chromosome 9. This was consistent with a digital PCR assay, validating one copy of the viral DNA. Because exposure of HUV-EC-C to chemicals did not cause viral reactivation, long term cell culture of HUV-EC-C was carried out to assess the stability of viral integration. The growth rate was altered depending on passage numbers, and morphology also changed during culture. SNP microarray profiles showed some differences between low and high passages, implying that the HUV-EC-C genome had changed during culture. However, no detectable change was observed in chromosome 9, where HHV-6B integration and the viral copy number remained unchanged. Our results suggest that integrated HHV-6B is stable in HUV-EC-C despite genome instability.

  17. A critical role for the cholesterol-associated proteolipids PLP and M6B in myelination of the central nervous system.

    Science.gov (United States)

    Werner, Hauke B; Krämer-Albers, Eva-Maria; Strenzke, Nicola; Saher, Gesine; Tenzer, Stefan; Ohno-Iwashita, Yoshiko; De Monasterio-Schrader, Patricia; Möbius, Wiebke; Moser, Tobias; Griffiths, Ian R; Nave, Klaus-Armin

    2013-04-01

    The formation of central nervous system myelin by oligodendrocytes requires sterol synthesis and is associated with a significant enrichment of cholesterol in the myelin membrane. However, it is unknown how oligodendrocytes concentrate cholesterol above the level found in nonmyelin membranes. Here, we demonstrate a critical role for proteolipids in cholesterol accumulation. Mice lacking the most abundant myelin protein, proteolipid protein (PLP), are fully myelinated, but PLP-deficient myelin exhibits a reduced cholesterol content. We therefore hypothesized that "high cholesterol" is not essential in the myelin sheath itself but is required for an earlier step of myelin biogenesis that is fully compensated for in the absence of PLP. We also found that a PLP-homolog, glycoprotein M6B, is a myelin component of low abundance. By targeting the Gpm6b-gene and crossbreeding, we found that single-mutant mice lacking either PLP or M6B are fully myelinated, while double mutants remain severely hypomyelinated, with enhanced neurodegeneration and premature death. As both PLP and M6B bind membrane cholesterol and associate with the same cholesterol-rich oligodendroglial membrane microdomains, we suggest a model in which proteolipids facilitate myelination by sequestering cholesterol. While either proteolipid can maintain a threshold level of cholesterol in the secretory pathway that allows myelin biogenesis, lack of both proteolipids results in a severe molecular imbalance of prospective myelin membrane. However, M6B is not efficiently sorted into mature myelin, in which it is 200-fold less abundant than PLP. Thus, only PLP contributes to the high cholesterol content of myelin by association and co-transport. Copyright © 2013 Wiley Periodicals, Inc.

  18. The human vascular endothelial cell line HUV-EC-C harbors the integrated HHV-6B genome which remains stable in long term culture

    OpenAIRE

    Shioda, Setsuko; Kasai, Fumio; Ozawa, Midori; Hirayama, Noriko; Satoh, Motonobu; Kameoka, Yousuke; Watanabe, Ken; Shimizu, Norio; Tang, Huamin; Mori, Yasuko; Kohara, Arihiro

    2017-01-01

    Human herpes virus 6 (HHV-6) is a common human pathogen that is most often detected in hematopoietic cells. Although human cells harboring chromosomally integrated HHV-6 can be generated in vitro, the availability of such cell lines originating from in vivo tissues is limited. In this study, chromosomally integrated HHV-6B has been identified in a human vascular endothelial cell line, HUV-EC-C (IFO50271), derived from normal umbilical cord tissue. Sequence analysis revealed that the viral gen...

  19. WARM SPITZER OBSERVATIONS OF THREE HOT EXOPLANETS: XO-4b, HAT-P-6b, AND HAT-P-8b

    Energy Technology Data Exchange (ETDEWEB)

    Todorov, Kamen O. [Department of Astronomy and Astrophysics, The Pennsylvania State University, University Park, PA 16802 (United States); Deming, Drake [Planetary Systems Laboratory, NASA' s Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Knutson, Heather A. [Division of Geological and Planetary Sciences, California Institute of Technology, Pasadena, CA 91125 (United States); Burrows, Adam [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 05844 (United States); Sada, Pedro V. [Department of Physics and Mathematics, University of Monterrey, Monterrey (Mexico); Cowan, Nicolas B. [Department of Physics and Astronomy, Northwestern University, Evanston, IL 60208 (United States); Agol, Eric [Department of Astronomy, University of Washington, Box 351580, Seattle, WA 98195 (United States); Desert, Jean-Michel; Charbonneau, David [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA 02138 (United States); Fortney, Jonathan J.; Laughlin, Gregory [Department of Astronomy and Astrophysics, University of California at Santa Cruz, Santa Cruz, CA 95064 (United States); Langton, Jonathan [Department of Physics, Principia College, Elsah, IL 62028 (United States); Showman, Adam P.; Lewis, Nikole K. [Lunar and Planetary Laboratory, University of Arizona, Tucson, AZ 85721 (United States)

    2012-02-10

    We analyze Warm Spitzer/Infrared Array Camera observations of the secondary eclipses of three planets, XO-4b, HAT-P-6b, and HAT-P-8b. We measure secondary eclipse amplitudes at 3.6 {mu}m and 4.5 {mu}m for each target. XO-4b exhibits a stronger eclipse depth at 4.5 {mu}m than at 3.6 {mu}m, which is consistent with the presence of a temperature inversion. HAT-P-8b shows a stronger eclipse amplitude at 3.6 {mu}m and is best described by models without a temperature inversion. The eclipse depths of HAT-P-6b can be fitted with models with a small or no temperature inversion. We consider our results in the context of a postulated relationship between stellar activity and temperature inversion and a relationship between irradiation level and planet dayside temperature, as discussed by Knutson et al. and Cowan and Agol, respectively. Our results are consistent with these hypotheses, but do not significantly strengthen them. To measure accurate secondary eclipse central phases, we require accurate ephemerides. We obtain primary transit observations and supplement them with publicly available observations to update the orbital ephemerides of the three planets. Based on the secondary eclipse timing, we set upper boundaries for ecos ({omega}) for HAT-P-6b, HAT-P-8b, and XO-4b and find that the values are consistent with circular orbits.

  20. THE ATMOSPHERES OF THE HOT-JUPITERS KEPLER-5b AND KEPLER-6b OBSERVED DURING OCCULTATIONS WITH WARM-SPITZER AND KEPLER

    Energy Technology Data Exchange (ETDEWEB)

    Desert, Jean-Michel; Charbonneau, David; Fressin, Francois; Latham, David W. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Fortney, Jonathan J. [Department of Astronomy and Astrophysics, University of California, Santa Cruz, CA 95064 (United States); Madhusudhan, Nikku [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 08544 (United States); Knutson, Heather A. [Department of Astronomy, University of California, Berkeley, CA 94720-3411 (United States); Deming, Drake [Solar System Exploration Division, NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Borucki, William J. [NASA Ames Research Center, Moffett Field, CA 94035 (United States); Brown, Timothy M. [Las Cumbres Observatory Global Telescope, Goleta, CA 93117 (United States); Caldwell, Douglas [SETI Institute, Mountain View, CA 94043 (United States); Ford, Eric B. [Department of Astronomy, University of Florida, Gainesville, FL 32611 (United States); Gilliland, Ronald L. [Space Telescope Science Institute, Baltimore, MD 21218 (United States); Marcy, Geoffrey W. [Berkeley Astronomy Department, University of California, Berkeley, CA 94720 (United States); Seager, Sara, E-mail: jdesert@cfa.harvard.edu [Massachusetts Institute of Technology, Cambridge, MA 02159 (United States)

    2011-11-01

    This paper reports the detection and the measurements of occultations of the two transiting hot giant exoplanets Kepler-5b and Kepler-6b by their parent stars. The observations are obtained in the near-infrared with Warm-Spitzer Space Telescope and at optical wavelengths by combining more than a year of Kepler photometry. The investigation consists of constraining the eccentricities of these systems and of obtaining broadband emergent photometric data for individual planets. For both targets, the occultations are detected at the 3{sigma} level at each wavelength with mid-occultation times consistent with circular orbits. The brightness temperatures of these planets are deduced from the infrared observations and reach T{sub Spitzer} = 1930 {+-} 100 K and T{sub Spitzer} = 1660 {+-} 120 K for Kepler-5b and Kepler-6b, respectively. We measure optical geometric albedos A{sub g} in the Kepler bandpass and find A{sub g} = 0.12 {+-} 0.04 for Kepler-5b and A{sub g} = 0.11 {+-} 0.04 for Kepler-6b, leading to upper an limit for the Bond albedo of A{sub B} {<=} 0.17 in both cases. The observations for both planets are best described by models for which most of the incident energy is redistributed on the dayside, with only less than 10% of the absorbed stellar flux redistributed to the nightside of these planets.

  1. Biological Variability and Impact of Oral Contraceptives on Vitamins B6, B12 and Folate Status in Women of Reproductive Age

    Directory of Open Access Journals (Sweden)

    Samir Samman

    2013-09-01

    Full Text Available Vitamins B6, B12 and folate play crucial metabolic roles especially during the reproductive years for women. There is limited reporting of within-subject variability of these vitamins. This study aimed to determine the within and between subject variability in serum vitamins B6, B12, folate and erythrocyte folate concentrations in young women; identify factors that contribute to variability; and determine dietary intakes and sources of these vitamins. Data were obtained from the control group of a trial aimed at investigating the effect of iron on the nutritional status of young women (age 25.2 ± 4.2 year; BMI 21.9 ± 2.2 kg/m2. The coefficients of variability within-subject (CVI and between-subject (CVG for serum vitamins B6, B12 and folate, and erythrocyte folate were calculated. Food frequency questionnaires provided dietary data. CVI and CVG were in the range 16.1%–25.7% and 31.7%–62.2%, respectively. Oral contraceptive pill (OCP use was associated (P = 0.042 with lower serum vitamin B12 concentrations. Initial values were 172 ± 16 pmol/L and 318 ± 51 pmol/L for OCP and non-OCP users, respectively; with differences maintained at four time points over 12 weeks. BMI, age, physical activity, alcohol intake and haematological variables did not affect serum or erythrocyte vitamin concentrations. Vitamin B12 intakes were derived from traditional and unexpected sources including commercial energy drinks. Young women using OCP had significantly lower serum vitamin B12 concentrations. This should be considered in clinical decision making and requires further investigation.

  2. A potential link between insulin signaling and GLUT4 translocation: Association of Rab10-GTP with the exocyst subunit Exoc6/6b

    Energy Technology Data Exchange (ETDEWEB)

    Sano, Hiroyuki; Peck, Grantley R. [Department of Biochemistry, Geisel School of Medicine at Dartmouth, Hanover, NH 03755 (United States); Blachon, Stephanie [Hybrigenics Services SAS, 3-5 Impasse Reille, 75014 Paris (France); Lienhard, Gustav E., E-mail: gustav.e.lienhard@dartmouth.edu [Department of Biochemistry, Geisel School of Medicine at Dartmouth, Hanover, NH 03755 (United States)

    2015-09-25

    Insulin increases glucose transport in fat and muscle cells by stimulating the exocytosis of specialized vesicles containing the glucose transporter GLUT4. This process, which is referred to as GLUT4 translocation, increases the amount of GLUT4 at the cell surface. Previous studies have provided evidence that insulin signaling increases the amount of Rab10-GTP in the GLUT4 vesicles and that GLUT4 translocation requires the exocyst, a complex that functions in the tethering of vesicles to the plasma membrane, leading to exocytosis. In the present study we show that Rab10 in its GTP form binds to Exoc6 and Exoc6b, which are the two highly homologous isotypes of an exocyst subunit, that both isotypes are found in 3T3-L1 adipocytes, and that knockdown of Exoc6, Exoc6b, or both inhibits GLUT4 translocation in 3T3-L1 adipocytes. These results suggest that the association of Rab10-GTP with Exoc6/6b is a molecular link between insulin signaling and the exocytic machinery in GLUT4 translocation. - Highlights: • Insulin stimulates the fusion of vesicles containing GLUT4 with the plasma membrane. • This requires vesicular Rab10-GTP and the exocyst plasma membrane tethering complex. • We find that Rab10-GTP associates with the Exoc6 subunit of the exocyst. • We find that knockdown of Exoc6 inhibits fusion of GLUT4 vesicles with the membrane. • The interaction of Rab10-GTP with Exoc6 potentially links signaling to exocytosis.

  3. Kinetic method of ruthenium ion traces determination, basing on the reaction of oxidation of direct blue 6B, by means of hydrogen peroxide

    International Nuclear Information System (INIS)

    Suwinska, T.; Gregorowicz, A.; Matysek-Majewska, D.

    1980-01-01

    A sensitive and selective method of determination of ruthenium ion traces (1.10 - 3 μg/cm 3 ) has been worked out. The method is based on oxidation of direct blue 6B by hydrogen peroxide under acidic conditions at pH = 0,8 - 1,2 in the presence of ruthenium ions as catalyst. The method has been applied for determination of ruthenium traces in Pt, PdCl 2 , PtCl 4 and RhCl 3 .n H 2 O. In these materials ruthenium has been determined within the range of 1,10 - 2 % - 5,10 - 4 %. (author)

  4. A Simple Proteomics-Based Approach to Identification of Immunodominant Antigens from a Complex Pathogen: Application to the CD4 T Cell Response against Human Herpesvirus 6B.

    Directory of Open Access Journals (Sweden)

    Aniuska Becerra-Artiles

    Full Text Available Most of humanity is chronically infected with human herpesvirus 6 (HHV-6, with viral replication controlled at least in part by a poorly characterized CD4 T cell response. Identification of viral epitopes recognized by CD4 T cells is complicated by the large size of the herpesvirus genome and a low frequency of circulating T cells responding to the virus. Here, we present an alternative to classical epitope mapping approaches used to identify major targets of the T cell response to a complex pathogen like HHV-6B. In the approach presented here, extracellular virus preparations or virus-infected cells are fractionated by SDS-PAGE, and eluted fractions are used as source of antigens to study cytokine responses in direct ex vivo T cell activation studies. Fractions inducing significant cytokine responses are analyzed by mass spectrometry to identify viral proteins, and a subset of peptides from these proteins corresponding to predicted HLA-DR binders is tested for IFN-γ production in seropositive donors with diverse HLA haplotypes. Ten HHV-6B viral proteins were identified as immunodominant antigens. The epitope-specific response to HHV-6B virus was complex and variable between individuals. We identified 107 peptides, each recognized by at least one donor, with each donor having a distinctive footprint. Fourteen peptides showed responses in the majority of donors. Responses to these epitopes were validated using in vitro expanded cells and naturally expressed viral proteins. Predicted peptide binding affinities for the eight HLA-DRB1 alleles investigated here correlated only modestly with the observed CD4 T cell responses. Overall, the response to the virus was dominated by peptides from the major capsid protein U57 and major antigenic protein U11, but responses to other proteins including glycoprotein H (U48 and tegument proteins U54 and U14 also were observed. These results provide a means to follow and potentially modulate the CD4 T-cell immune

  5. Structural relaxations in the bulk amorphous alloy Fe{sub 61}Co{sub 10}Ti{sub 3}Y{sub 6}B{sub 20}

    Energy Technology Data Exchange (ETDEWEB)

    Błoch, K., E-mail: 23kasia1@wp.pl; Nabiałek, M.; Gondro, J.

    2017-05-01

    The paper presents studies of annealing effect on the disaccommodation phenomenon in bulk amorphous alloy Fe{sub 61}Co{sub 10}Ti{sub 3}Y{sub 6}B{sub 20}. The investigated sample was prepared by suction-casting method in the form of rod. The annealing process has been performed at temperature well below the crystallisation temperature. The amorphous structure has been confirmed using X-ray diffractometer. The susceptibility and its disaccommodation were determined using completely automated set up. The disaccommodation curve was decomposed into three elementary processes, each of them was described by Gaussian distribution of relaxation times. The obtained results indicate that the disaccommodation phenomenon in studied alloy is related with directional ordering of atom pairs near the free volumes; this is in agreement with H. Kronmüller's theorem.

  6. Development of Fe-B Based Bulk Metallic Glasses: Morphology of Residual Phases in Fe50Ni16Mo6B18Zr10 Glass

    Directory of Open Access Journals (Sweden)

    Tiburce A. Aboki

    2013-04-01

    Full Text Available Iron-boron based bulk metallic glasses (BMG development has been initiated using Fe40Ni38Mo4B18 as precursor. Addition of zirconium up to 10 atomic % along with the reduction of Ni proportion improves the glass forming ability (GFA, which is optimum when Ni is suppressed in the alloy. However melting instability occurred during the materials fabrication resulting in the formation of residual crystalline phases closely related to the amorphous phase. Microstructure study shows an evolution from amorphous structure to peculiar acicular structure, particularly for Fe50Ni16Mo6B18Zr10, suggesting the amorphous structure as interconnected atomic sheets like “atomic mille feuilles” whose growth affects the alloys’ GFA.

  7. Hydrogen-deuterium exchange of the anionic group 6B transition-metal hydrides. Convenient, in-situ-deuterium transfer reagents

    International Nuclear Information System (INIS)

    Gaus, P.L.; Kao, S.C.; Darensbourg, M.Y.; Arndt, L.W.

    1984-01-01

    The facile exchange of hydrogen for detuerium in the anionic group 6B carbonyl hydrides HM(CO) 4 L - (M = Cr, W; L = CO P(OMe) 3 ) has been studied in THF 4 (tetrahydrofuran) with CH 3 OD, D 2 O, and CH 3 CO 2 D. This has provided a synthesis of the deuterides, DM(CO) 4 L - , as well as a convenient in situ source of deuteride reducing reagents for organic halides. A number of such reductions are described, using 2 H NMR to demonstrate both selectivity and stereospecificity for certain systems. The carbonyl region of the infrared spectra of the hydrides is not affected by deuteration of the hydrides, suggesting that the M-H or M-D vibrational modes are not coupled significantly to CO vibrations in these hydrides. The mechanism of the H/D exchange and of a related H 2 elimination reaction is discussed

  8. 1,3,5-Trihydroxy-13,13-dimethyl-2H-pyran [7,6-b] xanthone directly targets heat shock protein 27 in hepatocellular carcinoma.

    Science.gov (United States)

    Fu, Wei-Ming; Wang, Wei-Mao; Wang, Hua; Zhu, Xiao; Liang, Yan; Kung, Hsiang-Fu; Zhang, Jin-Fang

    2014-02-01

    We previously showed that the small molecule 1,3,5-trihydroxy-13,13-dimethyl-2H-pyran [7,6-b] xanthone (TDP) induces apoptosis in hepatocellular carcinoma (HCC) by suppressing Hsp27 expression, although the mechanism is not fully understood. To investigate the functional association between TDP and Hsp27 protein in HCC, recombinant Hsp27 protein was incubated with TDP at room temperature, and assayed by mass spectrum (MS) and natural electrophoresis. TDP effectively stimulated Hsp27 to form aggregates ex vitro, leading to suppression of its chaperone activity. The aggregates were degraded by the ubiquitin-proteasome (UPS) pathway. TDP directly interacted with Asp17 and Phe55 in chain C of Hsp27 on the basis of bioinformatic prediction. In conclusion, Hsp27 is a direct target of TDP in its anti-cancer activity, which provides strong support for a clinical application. © 2013 International Federation for Cell Biology.

  9. Genetic heterogeneity and consanguinity lead to a "double hit": homozygous mutations of MYO7A and PDE6B in a patient with retinitis pigmentosa.

    Science.gov (United States)

    Goldenberg-Cohen, Nitza; Banin, Eyal; Zalzstein, Yael; Cohen, Ben; Rotenstreich, Ygal; Rizel, Leah; Basel-Vanagaite, Lina; Ben-Yosef, Tamar

    2013-01-01

    Retinitis pigmentosa (RP), the most genetically heterogeneous disorder in humans, actually represents a group of pigmentary retinopathies characterized by night blindness followed by visual-field loss. RP can appear as either syndromic or nonsyndromic. One of the most common forms of syndromic RP is Usher syndrome, characterized by the combination of RP, hearing loss, and vestibular dysfunction. The underlying cause of the appearance of syndromic and nonsyndromic RP in three siblings from a consanguineous Israeli Muslim Arab family was studied with whole-genome homozygosity mapping followed by whole exome sequencing. THE FAMILY WAS FOUND TO SEGREGATE NOVEL MUTATIONS OF TWO DIFFERENT GENES: myosin VIIA (MYO7A), which causes type 1 Usher syndrome, and phosphodiesterase 6B, cyclic guanosine monophosphate-specific, rod, beta (PDE6B), which causes nonsyndromic RP. One affected child was homozygous for both mutations. Since the retinal phenotype seen in this patient results from overlapping pathologies, one might expect to find severe retinal degeneration. Indeed, he was diagnosed with RP based on an abnormal electroretinogram (ERG) at a young age (9 months). However, this early diagnosis may be biased, as two of his older siblings had already been diagnosed, leading to increased awareness. At the age of 32 months, he had relatively good vision with normal visual fields. Further testing of visual function and structure at different ages in the three siblings is needed to determine whether the two RP-causing genes mutated in this youngest sibling confer increased disease severity. This report further supports the genetic heterogeneity of RP, and demonstrates how consanguinity could increase intrafamilial clustering of multiple hereditary diseases. Moreover, this report provides a unique opportunity to study the clinical implications of the coexistence of pathogenic mutations in two RP-causative genes in a human patient.

  10. Genetic heterogeneity and consanguinity lead to a “double hit”: Homozygous mutations of MYO7A and PDE6B in a patient with retinitis pigmentosa

    Science.gov (United States)

    Goldenberg-Cohen, Nitza; Banin, Eyal; Zalzstein, Yael; Cohen, Ben; Rotenstreich, Ygal; Rizel, Leah; Basel-Vanagaite, Lina

    2013-01-01

    Purpose Retinitis pigmentosa (RP), the most genetically heterogeneous disorder in humans, actually represents a group of pigmentary retinopathies characterized by night blindness followed by visual-field loss. RP can appear as either syndromic or nonsyndromic. One of the most common forms of syndromic RP is Usher syndrome, characterized by the combination of RP, hearing loss, and vestibular dysfunction. Methods The underlying cause of the appearance of syndromic and nonsyndromic RP in three siblings from a consanguineous Israeli Muslim Arab family was studied with whole-genome homozygosity mapping followed by whole exome sequencing. Results The family was found to segregate novel mutations of two different genes: myosin VIIA (MYO7A), which causes type 1 Usher syndrome, and phosphodiesterase 6B, cyclic guanosine monophosphate-specific, rod, beta (PDE6B), which causes nonsyndromic RP. One affected child was homozygous for both mutations. Since the retinal phenotype seen in this patient results from overlapping pathologies, one might expect to find severe retinal degeneration. Indeed, he was diagnosed with RP based on an abnormal electroretinogram (ERG) at a young age (9 months). However, this early diagnosis may be biased, as two of his older siblings had already been diagnosed, leading to increased awareness. At the age of 32 months, he had relatively good vision with normal visual fields. Further testing of visual function and structure at different ages in the three siblings is needed to determine whether the two RP-causing genes mutated in this youngest sibling confer increased disease severity. Conclusions This report further supports the genetic heterogeneity of RP, and demonstrates how consanguinity could increase intrafamilial clustering of multiple hereditary diseases. Moreover, this report provides a unique opportunity to study the clinical implications of the coexistence of pathogenic mutations in two RP-causative genes in a human patient. PMID:23882135

  11. Structural and magnetic studies of La{sub 2}BMnO{sub 6} (B=Ni and Co) nanoparticles prepared by microwave sintering approach

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, M. Penchal, E-mail: drlpenchal@gmail.com [Center for Advanced Materials, Qatar University, Doha 2713 (Qatar); Shakoor, R.A., E-mail: shakoor@qu.edu.qa [Center for Advanced Materials, Qatar University, Doha 2713 (Qatar); Mohamed, A.M.A. [Department of Metallurgical and Materials Engineering, Faculty of Petroleum and Mining Engineering, Suez University, Suez 43721 (Egypt)

    2016-07-01

    Double perovskite La{sub 2}BMnO{sub 6} (B=Ni and Co) nanoparticles were successfully synthesized by microwave sintering approach (MWS). The crystal structure properties of LBMO nanoparticles were systematically investigated using X-ray diffraction (XRD), Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopies (XPS). The morphological characteristic features were examined by TEM and SEM images. Magnetization measurements were carried out by employing a physical property measurement system (PPMS). Field cooled (FC) and Zero field cooled (ZFC) magnetization measurements under an applied field of 100 Oe and in the temperature range of 5–400 K were performed. The single-phase La{sub 2}Ni/CoMnO{sub 6} of about 40–50 nm size was synthesized at 900 °C for 10 min, without the formation of any intermediate phase. The magnetization values obtained in the present wok show magnitudes of 42.9 emu/g and 65.4 emu/g for LNMO and LCMO, respectively. It is further noted that microwave sintered sample showed higher saturation magnetization values than the conventionally sintered samples reported in the literature and thus are promising candidate for possible spintronic applications in novel devices. - Highlights: • La{sub 2}BMnO{sub 6} (B=Ni and Co) nanoparticles were successfully synthesized by microwave sintering approach. • Crystal structure was confirmed by XRD, FTIR and SEM. • Its structural, morphological, magnetic behavior is studied. • Outstanding saturation magnetization of 42.9 and 65.4 emu/g for LNMO and LCMO, respectively.

  12. DWPF SB6 Initial CPC Flowsheet Testing SB6-1 TO SB6-4L Tests Of SB6-A And SB6-B Simulants

    International Nuclear Information System (INIS)

    Lambert, D.; Pickenheim, B.; Best, D.

    2009-01-01

    two projections of the SB6 blend simulant composition (Tank 40 simulant after Tank 51 transfer is complete). The more washed simulant (SB6-A) had a set of four SRAT and SME simulations at varying acid stoichiometry levels (90%, 100%, 120% and 150%) using the Koopman Acid Prediction Calculation. Two additional SRAT simulations were made using SB6-B blend simulant at 100% and 120% of acid stoichiometry. SME cycles were noted performed for the SB6B simulants to allow the SRAT products to be used for melt rate testing

  13. KANDUNGAN VITAMIN B6, B9, B12 DAN E BEBERAPA JENIS DAGING, TELUR, IKAN DAN UDANG LAUT DI BOGOR DAN SEKITARNYA (VITAMIN B6, B9, B12 AND E CONTENT OF SEVERAL TYPES OF MEATS, EGGS, FISHES AND MARINE SHRIMPS IN BOGOR AND SURROUNDING AREAS

    Directory of Open Access Journals (Sweden)

    Heru Yuniati

    2012-06-01

    Full Text Available ABSTRACT Food Composition Table (DKBM in Indonesia has not mentioned all types of nutrients available in the food, particularly vitamin B6, B9 (folic acid, B12, and vitamin E. Therefore this study aimed to analyze the content of vitamin B6, B9 (folic acid, B12, and vitamin E in several types of meat, eggs, fish and marine shrimps consumed in Bogor and surrounding areas. Vitamin B6, B9, B12, and vitamin E from three kinds of meat (chicken, beef, lamb, two types of eggs (chicken, duck, and four species of fish (snapper, bloating, carp and tuna and crayfish are analyzed using High-Performance Liquid Chromatography (HPLC. The samples used are raw and taken from three locations in Bogor and surrounding areas. Fishes, meats and eggs contain high levels of folic acid, however the amount of folic acid content in meat varies depending on which part of meat the samples are taken, types of organ, and the fat content of the meat. The folic acid content in chicken wings is different with those in thigh. In fatty mutton the folic acid is higher than in those lean meat, and in yolk is higher than those in egg white. Vitamin E content of snapper is the highest amongs other types of fishes (6.54 µg/100 g.Chicken eggs contain a higher amount of vitamin E than duck eggs, while the yolk contains ahigher amount of vitamin E than those egg white. Keywords: animal foods, vitamin B6, vitamin B9 (folic Acid, vitamin B12, vitamin E   ABSTRAK Daftar Komposisi Bahan Makanan (DKBM yang ada di Indonesia belum memuat semua jenis zat gizi dalam makanan, khususnya vitamin B6, B9 (asam folat, B12 dan vitamin E. Menganalisis kandungan vitamin B6, B9 (asam folat, B12, dan vitamin E dalam beberapa jenis daging, telur, ikan dan udang laut yang dikonsumsi masyarakat di Bogor dan sekitarnya. Kandungan vitamin B6, B9, B12 dan vitamin E dari tiga jenis daging (ayam, sapi, kambing, dua jenis telur (ayam, itik, serta empat jenis ikan (kakap, kembung, mas, tongkol dan udang laut

  14. First-principles study of electronic and optical properties of lead-free double perovskites Cs2NaBX6 (B = Sb, Bi; X = Cl, Br, I)

    Science.gov (United States)

    Zhao, Shuai; Yamamoto, Kumiko; Iikubo, Satoshi; Hayase, Shuzi; Ma, Tingli

    2018-06-01

    Organolead halide perovskite is regarded as the most promising light-harvesting material for next-generation solar cells; however, the intrinsic instability and toxicity of lead are still of great concern. Bismuth is ecofriendly and has electronic properties similar to those of lead, which has gradually attracted interest for optoelectronic applications. However, the valence state of bismuth is different from that of lead, eliminating the possibility of replacing lead by bismuth in organolead halide perovskites. To address this matter, one feasible strategy is to construct B-site double perovskites by the combination of Bi3+ and B+ in 1:1 ratio. In this work, lead-free halide double perovskites of the form Cs2NaBX6 (B = Sb, Bi; X = Cl, Br, I) were investigated by first-principles calculations. The electronic properties, optical absorption coefficients, and thermodynamic stability of these compounds were investigated to ascertain their potential application in solar energy conversion. The results provide theoretical support for the exploration of lead-free perovskite materials in potential optoelectronic applications.

  15. Coaxial triple-layered versus helical Be{sub 6}B{sub 11}{sup -} clusters. Dual structural fluxionality and multifold aromaticity

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Jin-Chang [Institute of Materials Science and Department of Chemistry, Xinzhou Teachers University, Shanxi (China); Nanocluster Laboratory, Institute of Molecular Science, Shanxi University, Taiyuan (China); Feng, Lin-Yan; Wang, Ying-Jin; Zhai, Hua-Jin [Nanocluster Laboratory, Institute of Molecular Science, Shanxi University, Taiyuan (China); Jalife, Said; Vasquez-Espinal, Alejandro; Cabellos, Jose Luis; Pan, Sudip; Merino, Gabriel [Departamento de Fisica Aplicada, Centro de Investigacion y de Estudios Avanzados, Unidad Merida, km 6 Antigua carretera a Progreso, Merida, Yuc. (Mexico)

    2017-08-14

    Two low-lying structures are unveiled for the Be{sub 6}B{sub 11}{sup -} nanocluster system that are virtually isoenergetic. The first, triple-layered cluster has a peripheral B{sub 11} ring as central layer, being sandwiched by two Be{sub 3} rings in a coaxial fashion, albeit with no discernible interlayer Be-Be bonding. The B{sub 11} ring revolves like a flexible chain even at room temperature, gliding freely around the Be{sub 6} prism. At elevated temperatures (1000 K), the Be{sub 6} core itself also rotates; that is, two Be{sub 3} rings undergo relative rotation or twisting with respect to each other. Bonding analyses suggest four-fold (π and σ) aromaticity, offering a dilute and fluxional electron cloud that lubricates the dynamics. The second, helix-type cluster contains a B{sub 11} helical skeleton encompassing a distorted Be{sub 6} prism. It is chiral and is the first nanosystem with a boron helix. Molecular dynamics also shows that at high temperature the helix cluster readily converts into the triple-layered one. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  16. Sc, Y, La-Lu. Rare earth elements. Vol. A6b. Y, La, and the lanthanoids. Geochemistry: Hydrosphere, atmosphere. Cosmo- and geochemical cycles. Balance

    Energy Technology Data Exchange (ETDEWEB)

    Sarbas, B; Toepper, W

    1988-01-01

    The present volume 'Rare earth elements' A6b describes in its first part the origin, mode of occurrence, and behavior of Y and/or RE elements in the hydrosphere and atmosphere. Separately for marine and non-marine environments (surface, subsurface, mineral, and thermal waters), the behavior of RE (including Y) in the hydrosphere comprises especially the relationship between content/composition and the chemistry of water, and the processes acting during migration, removal, and precipitation are outlined; the influence of biological material is mentioned. Behavior of RE in the atmosphere involves mainly transport, regional differences, and temporal variations as well as removal by precipitation; the anthropogenic influence is only outlined. The second part of this volume treats, partly in a more summary manner, the cosmo- and geochemical cycles and the balance of Y and/or RE elements. The relationship between geodynamic position and type of magmatism, as well as the geochemical variations in the geospheres, especially mantle and crust of the earth, are described in greater detail. With 2 figs..

  17. Synthesis, properties, crystal structures, and semiconductor characteristics of naphtho[1,2-b:5,6-b']dithiophene and -diselenophene derivatives.

    Science.gov (United States)

    Shinamura, Shoji; Miyazaki, Eigo; Takimiya, Kazuo

    2010-02-19

    In this paper we present the synthesis, structures, characterization, and applications to field-effect transistors (FETs) of naphtho[1,2-b:5,6-b']dithiophene (NDT) and -diselenophene (NDS) derivatives. Treatment of 1,5-dichloro-2,6-diethynylnaphthalenes, easily derived from commercially available 2,6-dihydroxynaphthalene, with sodium chalcogenide afforded a straightforward access to NDTs and NDSs including the parent and dioctyl and diphenyl derivatives. Physicochemical evaluations of NDT and NDS derivatives showed that these heteroarenes have a similar electronic structure with isomeric [1]benzothieno[2,3-b][1]benzothiophene (BTBT) and [1]benzoselenopheneno[2,3-b][1]benzoselenophene (BSBS) derivatives, respectively. Although attempts to fabricate solution-processed field-effect transistors (FETs) with soluble dioctyl-NDT (C(8)-NDT) and -NDS (C(8)-NDS) failed, diphenyl derivatives (DPh-NDT and DPh-NDS) afforded vapor-processed FETs showing field-effect mobility as high as 0.7 cm(2) V(-1) s(-1). These results indicated that NDT and NDS are new potential heteroarene core structures for organic semiconducting materials.

  18. Naphtho[1,2-b:5,6-b']dithiophene-Based Conjugated Polymers for Fullerene-Free Inverted Polymer Solar Cells.

    Science.gov (United States)

    Jiang, Zhaoyan; Li, Huan; Wang, Zhen; Zhang, Jianqi; Zhang, Yajie; Lu, Kun; Wei, Zhixiang

    2018-03-23

    Three novel copolymers based on zigzag naphthodithiophene (zNDT) with different aromatic rings as π bridges and different core side substitutions are designed and synthesized (PzNDT-T-1,3-bis(4-(2-ethylhexyl)-thiophen-2-yl)-5,7-bis(2-ethylhexyl)benzo[1,2-c:4,5-c']-dithiophene-4,8-dione (BDD), PzNDT-TT-BDD, and PzNDTP-T-BDD, respectively). The 2D conjugation structure and molecular planarity of the polymers can be effectively altered through the modification of conjugated side chains and π-bridges. These alterations contribute to the variation in energy levels, light absorption capacity, and morphology compatibility of the polymers. When blended with the nonfullerene acceptor (2,2'-[(4,4,9,9-tetrahexyl-4,9-dihydro-sindaceno[1,2-b:5,6-b']dithiophene-2,7-diyl)bis[methylidyne(3-oxo-1H-indene-2,1(3H)-diylidene)

  19. Magnetically frustrated double perovskites: synthesis, structural properties, and magnetic order of Sr{sub 2}BOsO{sub 6} (B = Y, In, Sc)

    Energy Technology Data Exchange (ETDEWEB)

    Paul, Avijit Kumar; Sarapulova, Angelina; Adler, Peter; Kanungo, Sudipta; Mikhailova, Daria; Schnelle, Walter; Hu, Zhiwei; Kuo, Changyang; Yan, Binghai; Felser, Claudia; Tjeng, Liu Hao [Max-Planck-Institut fuer Chemische Physik fester Stoffe,Dresden (Germany); Reehuis, Manfred [Helmholtz-Zentrum Berlin fuer Materialien und Energie, Berlin (Germany); Siruguri, Vasudeva; Rayaprol, Sudhindra [UGC-DAE Consortium for Scientific Research (CSR), Mumbai Centre, Mumbai (India); Soo, Yunlian [Department of Physics, National Tsing Hua University, Hsinchu (China); Jansen, Martin [Max-Planck-Institut fuer Chemische Physik fester Stoffe,Dresden (Germany); Max-Planck-Institut fuer Festkoerperforschung, Stuttgart (Germany)

    2015-02-15

    Double perovskites Sr{sub 2}BOsO{sub 6} (B = Y, In, and Sc) were prepared from the respective binary metal oxides, and their structural, magnetic, and electronic properties were investigated. At room temperature all these compounds crystallize in the monoclinic space group P2{sub 1}/n. They contain magnetic osmium (Os{sup 5+}, t{sub 2g}{sup 3}) ions and are antiferromagnetic insulators with Neel temperatures T{sub N} = 53 K, 26 K, and 92 K for B = Y, In, and Sc, respectively. Powder neutron diffraction studies on Sr{sub 2}YOsO{sub 6} and Sr{sub 2}InOsO{sub 6} showed that the crystal structures remain unchanged down to 3 K. The Y and In compounds feature a type I antiferromagnetic spin structure with ordered Os moments of 1.91 μ{sub B} and 1.77 μ{sub B}, respectively. The trend in T{sub N} does not simply follow the development of the lattice parameters, which suggests that d{sup 0} compared to d{sup 10} ions on the B site favor a somewhat different balance of exchange interactions in the frustrated Os{sup 5+} fcc-like lattice. (Copyright copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. A Novel Contrast Stain for the Rapid Diagnosis of Pityriasis Versicolor: A Comparison of Chicago Sky Blue 6B Stain, Potassium Hydroxide Mount and Culture.

    Science.gov (United States)

    Lodha, Nikita; Poojary, Shital Amin

    2015-01-01

    The mycological study of pityriasis versicolor is usually done by potassium hydroxide (KOH) mount and culture. However, KOH mount lacks a color contrast and requires a trained eye to interpret, while culture is difficult to perform, time consuming and has low sensitivity. Chicago Sky Blue 6B (CSB) is a new contrast stain that highlights the fungal hyphae and spores, blue against a purplish background. This study was done to compare the utility of a novel contrast stain (CSB stain) with KOH mount and culture. Skin scrapings from the lesions of 100 clinically diagnosed cases of P. versicolor were subjected to (1) KOH mount and CSB stain for direct microscopic examination and (2) culture using Sabouraud's dextrose agar. The statistical analysis of CSB stain and culture was done using KOH mount as the reference method, as it is the most commonly performed and practical diagnostic test available for P. versicolor. An interrater reliability analysis using the Cohen's Kappa statistic was performed to determine consistency (agreement) among the different modalities. Direct microscopy with CSB stain, KOH mount and mycological culture showed positive results in 98 (98%), 92 (92%) and 56 (56%) patients, respectively. Using KOH mount as the reference method, CSB stain had a sensitivity of 100% which was significantly higher than culture (60.9%). Statistically significant fair agreement was found between CSB stain and KOH mount (94% with κ=0.38, P < 0.001). Negligible agreement was found between CSB stain and culture (66%, κ=0.199, P = 0.001) as well as between KOH mount and culture (64%, κ=0.051, P = 0.107). CSB staining of skin scrapings is the most sensitive method for the diagnosis of pityriasis versicolor. Due to the distinct contrast provided by CSB, it is easy to perform, rapid and qualitatively superior to KOH mount.

  1. A novel contrast stain for the rapid diagnosis of pityriasis versicolor: A comparison of Chicago Sky Blue 6B stain, potassium hydroxide mount and culture

    Directory of Open Access Journals (Sweden)

    Nikita Lodha

    2015-01-01

    Full Text Available Background: The mycological study of pityriasis versicolor is usually done by potassium hydroxide (KOH mount and culture. However, KOH mount lacks a color contrast and requires a trained eye to interpret, while culture is difficult to perform, time consuming and has low sensitivity. Chicago Sky Blue 6B (CSB is a new contrast stain that highlights the fungal hyphae and spores, blue against a purplish background. Aims and Objectives: This study was done to compare the utility of a novel contrast stain (CSB stain with KOH mount and culture. Materials and Methods: Skin scrapings from the lesions of 100 clinically diagnosed cases of P. versicolor were subjected to (1 KOH mount and CSB stain for direct microscopic examination and (2 culture using Sabouraud′s dextrose agar. The statistical analysis of CSB stain and culture was done using KOH mount as the reference method, as it is the most commonly performed and practical diagnostic test available for P. versicolor. An interrater reliability analysis using the Cohen′s Kappa statistic was performed to determine consistency (agreement among the different modalities. Observations and Results: Direct microscopy with CSB stain, KOH mount and mycological culture showed positive results in 98 (98%, 92 (92% and 56 (56% patients, respectively. Using KOH mount as the reference method, CSB stain had a sensitivity of 100% which was significantly higher than culture (60.9%. Statistically significant fair agreement was found between CSB stain and KOH mount (94% with κ=0.38, P < 0.001. Negligible agreement was found between CSB stain and culture (66%, κ=0.199, P = 0.001 as well as between KOH mount and culture (64%, κ=0.051, P = 0.107. Conclusion: CSB staining of skin scrapings is the most sensitive method for the diagnosis of pityriasis versicolor. Due to the distinct contrast provided by CSB, it is easy to perform, rapid and qualitatively superior to KOH mount.

  2. ORNL rod-bundle heat-transfer test data. Volume 3. Thermal-hydraulic test facility experimental data report for test 3.06.6B - transient film boiling in upflow

    International Nuclear Information System (INIS)

    Mullins, C.B.; Felde, D.K.; Sutton, A.G.; Gould, S.S.; Morris, D.G.; Robinson, J.J.

    1982-05-01

    Reduced instrument responses are presented for Thermal-Hyraulic Test Facility (THTF) Test 3.06.6B. This test was conducted by members of the Oak Ridge National Laboratory Pressurized-Water-Reactor (PWR) Blowdown Heat Transfer (BDHT) Separate-Effects Program on August 29, 1980. The objective of the program was to investigate heat transfer phenomena believed to occur in PWR's during accidents, including small and large break loss-of-coolant accidents. Test 3.06.6B was conducted to obtain transient film boiling data in rod bundle geometry under reactor accident-type conditions. The primary purpose of this report is to make the reduced instrument responses for THTF Test 3.06.6B available. Included in the report are uncertainties in the instrument responses, calculated mass flows, and calculated rod powers

  3. Predominance of influenza A(H1N1)pdm09 virus genetic subclade 6B.1 and influenza B/Victoria lineage viruses at the start of the 2015/16 influenza season in Europe

    DEFF Research Database (Denmark)

    Broberg, Eeva; Melidou, Angeliki; Prosenc, Katarina

    2016-01-01

    Influenza A(H1N1)pdm09 viruses predominated in the European influenza 2015/16 season. Most analysed viruses clustered in a new genetic subclade 6B.1, antigenically similar to the northern hemisphere vaccine component A/California/7/2009. The predominant influenza B lineage was Victoria compared...

  4. A 3D digital atlas of the Nicotiana tabacum root tip and its use to investigate changes in the root apical meristem induced by the Agrobacterium 6b oncogene.

    Science.gov (United States)

    Pasternak, Taras; Haser, Thomas; Falk, Thorsten; Ronneberger, Olaf; Palme, Klaus; Otten, Léon

    2017-10-01

    Using the intrinsic Root Coordinate System (iRoCS) Toolbox, a digital atlas at cellular resolution has been constructed for Nicotiana tabacum roots. Mitotic cells and cells labeled for DNA replication with 5-ethynyl-2'-deoxyuridine (EdU) were mapped. The results demonstrate that iRoCS analysis can be applied to roots that are thicker than those of Arabidopsis thaliana without histological sectioning. A three-dimensional (3-D) analysis of the root tip showed that tobacco roots undergo several irregular periclinal and tangential divisions. Irrespective of cell type, rapid cell elongation starts at the same distance from the quiescent center, however, boundaries between cell proliferation and transition domains are cell-type specific. The data support the existence of a transition domain in tobacco roots. Cell endoreduplication starts in the transition domain and continues into the elongation zone. The tobacco root map was subsequently used to analyse root organization changes caused by the inducible expression of the Agrobacterium 6b oncogene. In tobacco roots that express the 6b gene, the root apical meristem was shorter and radial cell growth was reduced, but the mitotic and DNA replication indexes were not affected. The epidermis of 6b-expressing roots produced less files and underwent abnormal periclinal divisions. The periclinal division leading to mature endodermis and cortex3 cell files was delayed. These findings define additional targets for future studies on the mode of action of the Agrobacterium 6b oncogene. © 2017 The Authors The Plant Journal © 2017 John Wiley & Sons Ltd.

  5. VERY LOW MASS STELLAR AND SUBSTELLAR COMPANIONS TO SOLAR-LIKE STARS FROM MARVELS. V. A LOW ECCENTRICITY BROWN DWARF FROM THE DRIEST PART OF THE DESERT, MARVELS-6b

    Energy Technology Data Exchange (ETDEWEB)

    De Lee, Nathan; Stassun, Keivan G.; Cargile, Phillip [Department of Physics and Astronomy, Vanderbilt University, Nashville, TN 37235 (United States); Ge, Jian; Fleming, Scott W.; Lee, Brian L.; Chang Liang [Department of Astronomy, University of Florida, 211 Bryant Space Science Center, Gainesville, FL 32611-2055 (United States); Crepp, Justin R. [Department of Physics, University of Notre Dame, 225 Nieuwland Science Hall, Notre Dame, IN 46556 (United States); Eastman, Jason; Gaudi, B. Scott [Department of Astronomy, Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Esposito, Massimiliano; Femenia, Bruno; Gonzalez Hernandez, Jonay I.; Allende Prieto, Carlos [Instituto de Astrofisica de Canarias (IAC), E-38205 La Laguna, Tenerife (Spain); Ghezzi, Luan [Observatorio Nacional, Rua Gal. Jose Cristino 77, Rio de Janeiro, RJ 20921-400 (Brazil); Wisniewski, John P. [H L Dodge Department of Physics and Astronomy, University of Oklahoma, 440 W Brooks St Norman, OK 73019 (United States); Wood-Vasey, W. Michael [Pittsburgh Particle physics, Astrophysics, and Cosmology Center (PITT PACC), Department of Physics and Astronomy, University of Pittsburgh, Pittsburgh, PA 15260 (United States); Agol, Eric; Barnes, Rory [Astronomy Department, University of Washington, Box 351580, Seattle, WA 98195 (United States); Bizyaev, Dmitry, E-mail: nathan.delee@vanderbilt.edu [Apache Point Observatory, P.O. Box 59, Sunspot, NM 88349-0059 (United States); and others

    2013-06-15

    We describe the discovery of a likely brown dwarf (BD) companion with a minimum mass of 31.7 {+-} 2.0 M{sub Jup} to GSC 03546-01452 from the MARVELS radial velocity survey, which we designate as MARVELS-6b. For reasonable priors, our analysis gives a probability of 72% that MARVELS-6b has a mass below the hydrogen-burning limit of 0.072 M{sub Sun }, and thus it is a high-confidence BD companion. It has a moderately long orbital period of 47.8929{sup +0.0063}{sub -0.0062} days with a low eccentricity of 0.1442{sup +0.0078}{sub -0.0073}, and a semi-amplitude of 1644{sup +12}{sub -13} m s{sup -1}. Moderate resolution spectroscopy of the host star has determined the following parameters: T{sub eff} = 5598 {+-} 63, log g = 4.44 {+-} 0.17, and [Fe/H] = +0.40 {+-} 0.09. Based upon these measurements, GSC 03546-01452 has a probable mass and radius of M{sub *} = 1.11 {+-} 0.11 M{sub Sun} and R{sub *} = 1.06 {+-} 0.23 R{sub Sun} with an age consistent with less than {approx}6 Gyr at a distance of 219 {+-} 21 pc from the Sun. Although MARVELS-6b is not observed to transit, we cannot definitively rule out a transiting configuration based on our observations. There is a visual companion detected with Lucky Imaging at 7.''7 from the host star, but our analysis shows that it is not bound to this system. The minimum mass of MARVELS-6b exists at the minimum of the mass functions for both stars and planets, making this a rare object even compared to other BDs. It also exists in an underdense region in both period/eccentricity and metallicity/eccentricity space.

  6. VERY LOW MASS STELLAR AND SUBSTELLAR COMPANIONS TO SOLAR-LIKE STARS FROM MARVELS. V. A LOW ECCENTRICITY BROWN DWARF FROM THE DRIEST PART OF THE DESERT, MARVELS-6b

    International Nuclear Information System (INIS)

    De Lee, Nathan; Stassun, Keivan G.; Cargile, Phillip; Ge, Jian; Fleming, Scott W.; Lee, Brian L.; Chang Liang; Crepp, Justin R.; Eastman, Jason; Gaudi, B. Scott; Esposito, Massimiliano; Femenía, Bruno; González Hernández, Jonay I.; Allende Prieto, Carlos; Ghezzi, Luan; Wisniewski, John P.; Wood-Vasey, W. Michael; Agol, Eric; Barnes, Rory; Bizyaev, Dmitry

    2013-01-01

    We describe the discovery of a likely brown dwarf (BD) companion with a minimum mass of 31.7 ± 2.0 M Jup to GSC 03546-01452 from the MARVELS radial velocity survey, which we designate as MARVELS-6b. For reasonable priors, our analysis gives a probability of 72% that MARVELS-6b has a mass below the hydrogen-burning limit of 0.072 M ☉ , and thus it is a high-confidence BD companion. It has a moderately long orbital period of 47.8929 +0.0063 -0.0062 days with a low eccentricity of 0.1442 +0.0078 -0.0073 , and a semi-amplitude of 1644 +12 -13 m s –1 . Moderate resolution spectroscopy of the host star has determined the following parameters: T eff = 5598 ± 63, log g = 4.44 ± 0.17, and [Fe/H] = +0.40 ± 0.09. Based upon these measurements, GSC 03546-01452 has a probable mass and radius of M * = 1.11 ± 0.11 M ☉ and R * = 1.06 ± 0.23 R ☉ with an age consistent with less than ∼6 Gyr at a distance of 219 ± 21 pc from the Sun. Although MARVELS-6b is not observed to transit, we cannot definitively rule out a transiting configuration based on our observations. There is a visual companion detected with Lucky Imaging at 7.''7 from the host star, but our analysis shows that it is not bound to this system. The minimum mass of MARVELS-6b exists at the minimum of the mass functions for both stars and planets, making this a rare object even compared to other BDs. It also exists in an underdense region in both period/eccentricity and metallicity/eccentricity space.

  7. Zr 2Ir 6B with an eightfold superstructure of the cubic perovskite-like boride ZrIr 3B 0.5: Synthesis, crystal structure and bonding analysis

    Science.gov (United States)

    Hermus, Martin; Fokwa, Boniface P. T.

    2010-04-01

    Single phase powder samples and single crystals of Zr 2Ir 6B were successfully synthesized by arc-melting the elements in a water-cooled copper crucible under an argon atmosphere. Superstructure reflections were observed both on powder and on single crystal diffraction data, leading to an eightfold superstructure of ZrIr 3B x phase. The new phase, which has a metallic luster, crystallizes in space group Fm3¯m (no. 225) with the lattice parameters a=7.9903(4) Å, V=510.14(4) Å 3. Its crystal structure was refined on the basis of powder as well as single crystal data. The single crystal refinement converged to R1=0.0239 and w R2=0.0624 for all 88 unique reflections and 6 parameters. Zr 2Ir 6B is isotypic to Ti 2Rh 6B and its structure can be described as a defect double perovskite, A2BB' O6, where the A site is occupied by zirconium, the B site by boron, the O site by iridium but the B' site is vacant, leading to the formation of empty and boron-filled octahedral Ir 6 clusters. According to the result of tight-binding electronic structure calculations, Ir-B and Ir-Zr interactions are mainly responsible for the structural stability of the phase. According to COHP bonding analysis, the strongest bonding occurs for the Ir-B contacts, and the Ir-Ir bonding within the empty clusters is two times stronger than that in the BIr 6 octahedra.

  8. Ordered perovskites with cationic vacancies. 4. Compounds of type Ba/sub 6/B/sub 2/sup(III)vacantTe/sub 3/sup(VI)O/sub 18/

    Energy Technology Data Exchange (ETDEWEB)

    Schittenhelm, H J; Kemmler-Sack, S [Tuebingen Univ. (Germany, F.R.). Lehrstuhl fuer Anorganische Chemie 2

    1979-07-01

    Compounds of the composition Ba/sub 6/B(III)/sub 2/vacantTe(VI)/sub 3/O/sub 18/ equivalent to Ba/sub 2/Ba(III)sub(2/3)vacantsub(1/3)Te(VI)O/sub 6/, with B(III) = Pr, Nd, Sm-Lu, Y crystallize with a cubic perovskite lattice. The cell parameters diminish as the size of B(III) falls (B(III) = Pr: a = 8.52 A; Lu: a = 8.33 A). In contrast to the corresponding perovskites with U(VI) and W(VI) no polymorphism is observed.

  9. Vom work Book Journal 2010 6b

    African Journals Online (AJOL)

    USER

    One hundred poultry were collected using simple random sampling from 114 commercial, backyard and free range flocks affected by HPAI in different parts of. Nigeria. A total of 244,992 poultry were in. INTRODUCTION. Highly pathogenic avian influenza (HPAI) is a viral disease affecting almost all domestic and wild birds.

  10. Vom work Book Journal 2010 6b

    African Journals Online (AJOL)

    USER

    build, maintain the body's structure and supply energy for vital activities. Protein tends to be the most expensive. The safest, simplest and cheapest source is the non protein nitrogen urea. It has been reported that one hundred grammes of urea are equivalent to 200g of digestible protein provided the remainder of the ration.

  11. Vom work Book Journal 2010 6b

    African Journals Online (AJOL)

    USER

    Samples (blood, liver, kidney and muscle) were taken from two randomly ... strong muscular contractions, hence making it easier to .... tables I, II and III. Generally the kidneys appear to have the highest concentration of the drug, followed by liver and skeletal muscle. This pattern appears to be the same in all groups and at ...

  12. Vom work Book Journal 2010 6b

    African Journals Online (AJOL)

    USER

    1992; McDonald et al., 1995; Uza et al.,. 2005) have identified urea as the safest and cheapest of the non-protein nitrogen (NPN) compound to release ammonia for rumen microbes to create new proteins. This high caloric maize offal (waste) could be combined with complementary cheap protein source (urea) that can ...

  13. Tunneling-Magnetoresistance Ratio Comparison of MgO-Based Perpendicular-Magnetic-Tunneling-Junction Spin Valve Between Top and Bottom Co2Fe6B2 Free Layer Structure.

    Science.gov (United States)

    Lee, Du-Yeong; Lee, Seung-Eun; Shim, Tae-Hun; Park, Jea-Gun

    2016-12-01

    For the perpendicular-magnetic-tunneling-junction (p-MTJ) spin valve with a nanoscale-thick bottom Co2Fe6B2 free layer ex situ annealed at 400 °C, which has been used as a common p-MTJ structure, the Pt atoms of the Pt buffer layer diffused into the MgO tunneling barrier. This transformed the MgO tunneling barrier from a body-centered cubic (b.c.c) crystallized layer into a mixture of b.c.c, face-centered cubic, and amorphous layers and rapidly decreased the tunneling-magnetoresistance (TMR) ratio. The p-MTJ spin valve with a nanoscale-thick top Co2Fe6B2 free layer could prevent the Pt atoms diffusing into the MgO tunneling barrier during ex situ annealing at 400 °C because of non-necessity of a Pt buffer layer, demonstrating the TMR ratio of ~143 %.

  14. Hyperfine interaction and some thermomagnetic properties of amorphous and partially crystallized Fe70−xMxMo5Cr4Nb6B15 (M = Co or Ni, x = 0 or 10 alloys

    Directory of Open Access Journals (Sweden)

    Rzącki Jakub

    2015-03-01

    Full Text Available As revealed by Mössbauer spectroscopy, replacement of 10 at.% of iron in the amorphous Fe70Mo5Cr4Nb6B15 alloy by cobalt or nickel has no effect on the magnetic structure in the vicinity of room temperature, although the Curie point moves from 190 K towards ambient one. In the early stages of crystallization, the paramagnetic crystalline Cr12Fe36Mo10 phase appears before α-Fe or α-FeCo are formed, as is confirmed by X-ray diffractometry and transmission electron microscopy. Creation of the crystalline Cr12Fe36Mo10 phase is accompanied by the amorphous ferromagnetic phase formation at the expense of amorphous paramagnetic one.

  15. Heteroaromatization with 4-Hydroxycoumarin Part II: Synthesis of Some New Pyrano[2,3-d]pyrimidines, [1,2,4]triazolo[1,5-c]pyrimidines and Pyrimido[1,6-b]-[1,2,4]triazine Derivatives

    Directory of Open Access Journals (Sweden)

    A. H. Bedair

    2001-05-01

    Full Text Available A variety of novel [1,2,4]triazolo[1,5-c]pyrimidine-13-ones (4a-f and (5b-d could be obtained via reaction of 9-amino-7-(4’-chlorophenyl-8,9-dihydro-8-imino-6H,7H-[1]benzopyrano[3`,4`:5,6]pyrano[2,3-d]pyrimidine-6-one (3 with a variety of reagents. Pyrano[2,3-d]pyrimidine-6-ones 5a, 8a-c and pyrimido[1,6-b][1,2,4]-triazine-3,14-dione (6 were also prepared. The antimicrobial activity of some of the synthesized compounds was tested.

  16. Hexagonal perovskites with cationic vacancies. 8. Vibrational spectroscopic investigations on rhombohedral 18 L-stacking polytypes Ba/sub 6/B/sub 2/sup(III)vacantW/sub 3/sup(VI)O/sub 18/

    Energy Technology Data Exchange (ETDEWEB)

    Schittenhelm, H J; Fadini, A; Kemmler-Sack, S [Tuebingen Univ. (Germany, F.R.)

    1979-10-01

    The vibrational spectra of the 18 L stacking polytypes Ba/sub 6/B/sub 2/sup(III)vacant W/sub 3/O/sub 18/ (space group R3m; sequence (hhcccc)/sub 3/) with Bsup(III) = Lu, Y are reported. The octahedral net consists of W/sub 2/vacantO/sub 12/ and WO/sub 6/ groups, which are isolated from each other by the Ba and B ions. An assignment of the vibrational frequencies has been made with the aid of factor group analysis. For the W/sub 2/vacantO/sub 12/ block a complete force constant calculation is reported.

  17. A single tube PCR assay for simultaneous amplification of HSV-1/-2, VZV, CMV, HHV-6A/-6B, and EBV DNAs in cerebrospinal fluid from patients with virus-related neurological diseases.

    Science.gov (United States)

    Yamamoto, T; Nakamura, Y

    2000-10-01

    Cerebrospinal fluid (CSF) specimens from 27 patients with encephalitis, meningitis, and other neurological diseases were studied for the presence of herpes simplex virus types 1 and 2 (HSV-1/-2), varicella-zoster virus (VZV), cytomegalovirus (CMV), human herpesviruses 6A and 6B (HHV-6A/-6B) and Epstein-Barr virus (EBV) DNA using the polymerase chain reaction (PCR) method. The DNAs were amplified using two sets of consensus primer pairs in a single tube, bringing simultaneous amplification of the herpesviruses. The PCR products were analyzed by agarose gel electrophoresis, and Southern blot hybridization with virus-type specific probes, thus allowing discrimination between the different types of herpesviruses to be made. Each virus-specific probe was highly specific for identifying the PCR product. Thirty CSF specimens from 13 patients with encephalitis and 10 specimens from 10 patients with meningitis, respectively, were examined using this method. Eight patients with encephalitis and six with meningitis were positive for different herpesviruses, including patients with coinfections (HSV-1/-2 and VZV, VZV and CMV). Among four CSF specimens from four patients with other neurological disorders, dual amplification of CMV and EBV was present. Since identification of the types of herpesviruses in this system requires a very small amount of CSF, and is completed with one PCR, it is useful for routine diagnosis of herpesvirus infections in diagnostic laboratories. The viruses responsible for central nervous system infection are easily detected with various coinfection and serial patterns of herpesviruses, by this consensus primer-based PCR method. This may give an insight into the relationship between virus-related neurological diseases (VRNDS) and herpesvirus infections.

  18. A novel spectral resolution and simultaneous determination of multicomponent mixture of Vitamins B1, B6, B12, Benfotiamine and Diclofenac in tablets and capsules by derivative and MCR-ALS

    Science.gov (United States)

    Hegazy, Maha A.; Abdelwahab, Nada S.; Fayed, Ahmed S.

    2015-04-01

    A novel method was developed for spectral resolution and further determination of five-component mixture including Vitamin B complex (B1, B6, B12 and Benfotiamine) along with the commonly co-formulated Diclofenac. The method is simple, sensitive, precise and could efficiently determine the five components by a complementary application of two different techniques. The first is univariate second derivative method that was successfully applied for determination of Vitamin B12. The second is Multivariate Curve Resolution using the Alternating Least Squares method (MCR-ALS) by which an efficient resolution and quantitation of the quaternary spectrally overlapped Vitamin B1, Vitamin B6, Benfotiamine and Diclofenac sodium were achieved. The effect of different constraints was studied and the correlation between the true spectra and the estimated spectral profiles were found to be 0.9998, 0.9983, 0.9993 and 0.9933 for B1, B6, Benfotiamine and Diclofenac, respectively. All components were successfully determined in tablets and capsules and the results were compared to HPLC methods and they were found to be statistically non-significant.

  19. Dietary intake of the water-soluble vitamins B1, B2, B6, B12 and C in 10 countries in the European Prospective Investigation into Cancer and Nutrition.

    Science.gov (United States)

    Olsen, A; Halkjaer, J; van Gils, C H; Buijsse, B; Verhagen, H; Jenab, M; Boutron-Ruault, M C; Ericson, U; Ocké, M C; Peeters, P H M; Touvier, M; Niravong, M; Waaseth, M; Skeie, G; Khaw, K T; Travis, R; Ferrari, P; Sanchez, M J; Agudo, A; Overvad, K; Linseisen, J; Weikert, C; Sacerdote, C; Evangelista, A; Zylis, D; Tsiotas, K; Manjer, J; van Guelpen, B; Riboli, E; Slimani, N; Bingham, S

    2009-11-01

    To describe the intake of vitamins thiamine (B1), riboflavin (B2), B6 (pyridoxine), B12 (cobalamine) and C (ascorbic acid) and their food sources among 27 centres in 10 countries participating in the European Prospective Investigation into Cancer and Nutrition (EPIC) study. Between 1995 and 2000, 36 034 persons aged between 35 and 74 years were administered a standardized 24-h dietary recall using a computerized interview software programme (EPIC-SOFT). Intakes of the four B vitamins and vitamin C were estimated using the standardized EPIC Nutrient Database (ENDB). Mean intakes were adjusted for age and weighted by season and day of recall. Intake of B vitamins did not vary considerably between centres, except in the UK health-conscious cohort, in which substantially higher intakes of thiamine and lower intakes of vitamin B12 were reported compared with other centres. Overall, meat was the most important contributor to the B vitamins in all centres except in the UK health-conscious group. Vitamin C showed a clear geographical gradient, with higher intakes in the southern centres as compared with the northern ones; this was more pronounced in men than in women. Vegetables and fruits were major contributors to vitamin C in all centres, but juices and potatoes were also important sources in the northern centres. This study showed no major differences across centres in the mean intakes of B vitamins (thiamine, riboflavin, B6, B12), whereas a tendency towards a north-south gradient was observed for vitamin C.

  20. Heat shock protein 27 mediates the effect of 1,3,5-trihydroxy-13,13-dimethyl-2H-pyran [7,6-b] xanthone on mitochondrial apoptosis in hepatocellular carcinoma.

    Science.gov (United States)

    Fu, Wei-ming; Zhang, Jin-fang; Wang, Hua; Xi, Zhi-chao; Wang, Wei-mao; Zhuang, Peng; Zhu, Xiao; Chen, Shih-chi; Chan, Tak-ming; Leung, Kwong-Sak; Lu, Gang; Xu, Hong-Xi; Kung, Hsiang-fu

    2012-08-03

    Hepatocellular carcinoma (HCC) is a global public health problem which causes approximately 500,000 deaths annually. Considering that the limited therapeutic options for HCC, novel therapeutic targets and drugs are urgently needed. In this study, we discovered that 1,3,5-trihydroxy-13,13-dimethyl-2H-pyran [7,6-b] xanthone (TDP), isolated from the traditional Chinese medicinal herb, Garcinia oblongifolia, effectively inhibited cell growth and induced the caspase-dependent mitochondrial apoptosis in HCC. A two-dimensional gel electrophoresis and mass spectrometry-based comparative proteomics were performed to find the molecular targets of TDP in HCC cells. Eighteen proteins were identified as differently expressed, with Hsp27 protein being one of the most significantly down-regulated proteins induced by TDP. In addition, the following gain- and loss-of-function studies indicated that Hsp27 mediates mitochondrial apoptosis induced by TDP. Furthermore, a nude mice model also demonstrated the suppressive effect of TDP on HCC. Our study suggests that TDP plays apoptosis-inducing roles by strongly suppressing the Hsp27 expression that is specifically associated with the mitochondrial death of the caspase-dependent pathway. In conclusion, TDP may be a potential anti-cancer drug candidate, especially to cancers with an abnormally high expression of Hsp27. Copyright © 2012 Elsevier B.V. All rights reserved.

  1. HPLC Analysis of Water-Soluble Vitamins (B2, B3, B6, B12, and C and Fat-Soluble Vitamins (E, K, D, A, and β-Carotene of Okra (Abelmoschus esculentus

    Directory of Open Access Journals (Sweden)

    Rokayya Sami

    2014-01-01

    Full Text Available Okra is consumed as a vegetable by populations in Africa and Asia and particularly in Egypt. In this study, we investigated some nutritional components of okra grown in four different geographical locations of Egypt. A comparative analysis of water-soluble vitamins (B2, B3, B6, B12, and C and fat-soluble vitamins (E, K, D, A, and β-carotene in okra pods was carried out. Results of principal component analysis (PCA showed three clusters of varieties. The first cluster included the Dakahlia (D and Kafr El-Sheikh (K varieties. The second and the third clusters separated out the Suez (S and Mansoura (M varieties independently. The S pod showed the highest contents of vitamins B6 (49.81 μg/100 g and E (1.47 mg/100 g but contained the lowest contents of vitamins B3 (1.42 μg/100 g and B12 (undetected. The K pod showed the lowest vitamin C content (11.60 mg/100 g. The M pod showed the highest contents of vitamins B3 (22.70 μg/100 g, B12 (91.20 μg/100 g, C (27.14 mg/100 g, and K (0.21 mg/100 g. The D pod showed the lowest contents of vitamins E (0.15 mg/100 g, K (0.05 mg/100 g, and B6 (11.50 μg/100 g. These findings could help develop meal planning at the community level by incorporating okra varieties with high vitamin content.

  2. Structural evolution of the double perovskites Sr{sub 2}B'UO{sub 6} (B' = Mn, Fe, Co, Ni, Zn) upon reduction: Magnetic behavior of the uranium cations

    Energy Technology Data Exchange (ETDEWEB)

    Pinacca, R.M., E-mail: rmp@unsl.edu.ar [Area de Quimica General e Inorganica ' Dr. Gabino F. Puelles' , Departamento de Quimica, Facultad de Quimica, Bioquimica y Farmacia, Universidad Nacional de San Luis, Chacabuco y Pedernera, 5700 San Luis (Argentina); Viola, M.C.; Pedregosa, J.C. [Area de Quimica General e Inorganica ' Dr. Gabino F. Puelles' , Departamento de Quimica, Facultad de Quimica, Bioquimica y Farmacia, Universidad Nacional de San Luis, Chacabuco y Pedernera, 5700 San Luis (Argentina); Carbonio, R.E. [INFIQC (CONICET), Departamento de Fisicoquimica, Facultad de Ciencias Quimicas, Universidad Nacional de Cordoba, Ciudad Universitaria, X5000HUA Cordoba (Argentina); Lope, M.J. Martinez; Alonso, J.A. [Instituto de Ciencia de Materiales de Madrid, C.S.I.C., Cantoblanco, 28049 Madrid (Spain)

    2011-11-15

    Highlights: {yields} Evolution of the double perovskites Sr{sub 2}B'UO{sub 6} upon reduction were studied by XRPD. {yields} Orthorhombic (Pnma) disordered perovskites SrB'{sub 0.5-x}U{sub 0.5+x}O{sub 3} were obtained at 900 {sup o}C. {yields} U{sup 5+/4+} and Zn{sup 2+} cations are distributed at random over the octahedral positions. {yields} AFM ordering for the perovskite with B' = Zn appears below 30 K. -- Abstract: We describe the preparation of five perovskite oxides obtained upon reduction of Sr{sub 2}B'UO{sub 6} (B' = Mn, Fe, Co, Ni, Zn) with H{sub 2}/N{sub 2} (5%/95%) at 900 {sup o}C during 8 h, and their structural characterization by X-ray powder diffraction (XRPD). During the reduction process there is a partial segregation of the elemental metal when B' = Co, Ni, Fe, and the corresponding B'O oxide when B' = Mn, Zn. Whereas the parent, oxygen stoichiometric double perovskites Sr{sub 2}B'UO{sub 6} are long-range ordered concerning B' and U cations. The crystal structures of the reduced phases, SrB'{sub 0.5-x}U{sub 0.5+x}O{sub 3} with 0.37 < x < 0.27, correspond to simple, disordered perovskites; they are orthorhombic, space group Pnma (No. 62), with a full cationic disorder at the B site. Magnetic measurements performed on the phase with B' = Zn, indicate uncompensated antiferromagnetic ordering of the U{sup 5+}/U{sup 4+} sublattice below 30 K.

  3. Geodetic achievement and avoidance games for graphs | Haynes ...

    African Journals Online (AJOL)

    Let G = (V,E) be a nontrivial connected graph. For a subset S ⊆ V, the geodesic closure (S) of S is the set of all vertices on geodesics (shortest paths) between two vertices of S. We study the geodetic achievement and avoidance games defined by Buckley and Harary (Geodetic games for graphs, Quaestiones Math.

  4. Dependency of tunneling magnetoresistance ratio on Pt seed-layer thickness for double MgO perpendicular magnetic tunneling junction spin-valves with a top Co2Fe6B2 free layer ex-situ annealed at 400 °C.

    Science.gov (United States)

    Takemura, Yasutaka; Lee, Du-Yeong; Lee, Seung-Eun; Park, Jea-Gun

    2016-12-02

    For the double MgO based perpendicular magnetic tunneling junction (p-MTJ) spin-valves with a top Co 2 Fe 6 B 2 free layer ex situ annealed at 400 °C, the tunneling-magnetoresistance ratio (TMR) strongly depended on the platinum (Pt) seed layer thickness (t Pt ): it peaked (∼134%) at a specific t Pt (3.3 nm). The TMR ratio was initially and slightly increased from 113%-134% by the enhancement of the magnetic moment of the Co 2 Fe 6 B 2 pinned layer when t Pt increased from 2.0-3.3 nm, and then rapidly decreased from 134%-38.6% by the degrading face-centered-cubic crystallinity of the MgO tunneling barrier when t Pt increased from 3.3-14.3 nm.

  5. Stellite failure on a P91 HP valve - failure investigation and modelling of residual stresses

    DEFF Research Database (Denmark)

    Thorborg, Jesper; Hald, John; Hattel, Jesper Henri

    2006-01-01

    , and this provides a tool for process modification in order to minimize the risk for future breakdown. Both classical time independent and time dependent plasticity models have been used to describe the different material behaviours during the different process steps. The description of the materials is highly...

  6. Synthesis and properties of A{sub 6}B{sub 2}(OH){sub 16}Cl{sub 2}.4H{sub 2}O (A = Mg, Ni, Zn, Co, Mn and B = Al, Fe) materials for environmental applications

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Anderson, E-mail: anderson_dias@iceb.ufop.br [Departamento de Quimica, Universidade Federal de Ouro Preto, Campus Morro do Cruzeiro, ICEB II, Sala 67, Ouro Preto-MG, 35400-000 (Brazil); Cunha, Lumena; Vieira, Andiara C. [Departamento de Quimica, Universidade Federal de Ouro Preto, Campus Morro do Cruzeiro, ICEB II, Sala 67, Ouro Preto-MG, 35400-000 (Brazil)

    2011-09-15

    Highlights: {yields} A{sub 6}B{sub 2}(OH){sub 16}Cl{sub 2}.4H{sub 2}O (A = Mg, Ni, Zn, Co, Mn and B = Al, Fe) materials were synthesized. {yields} Chemical synthesis produced different levels of crystallinity and ordering degree. {yields} Structural investigation by Raman scattering revealed a complex band structure. {yields} A strong correlation between band structure and ionic radius was determined. -- Abstract: Double layered hydroxide materials of composition A{sub 6}B{sub 2}(OH){sub 16}Cl{sub 2}.4H{sub 2}O (A = Mg, Ni, Zn, Co, Mn and B = Al, Fe) were synthesized by chemical precipitation at 60 {sup o}C. Different levels of crystallinity and ordering degree were observed depending upon the chemical environment or the combination between divalent and trivalent cations. The results from high-resolution transmission electron microscopy revealed that nanostructured layered samples were obtained with interplanar spacing compatible with previous literature. Raman scattering was employed to investigate the complex band structure observed, particularly the lattice vibrations at lower frequencies, which is intimately correlated to the cationic radius of both divalent and trivalent ions. The results showed that strongly coordinated water and chloride ions besides highly structured hydroxide layers have a direct influence on the stability of the hydrotalcites. It was observed that transition and decomposition temperatures varied largely for different chemical compositions.

  7. Identidad de la vacuna contra Streptococcus pneumoniae “Quimi-Vio” mediante la técnica Dot Blot empleando los anticuerpos monoclonales contra los polisacáridos capsulares 1,5, 6B, 14 y 19F de la bacteria

    Directory of Open Access Journals (Sweden)

    Elizabeth González Aznar

    2017-02-01

    Full Text Available Streptococcus pneumoniae (neumococo constituye una de las principales causas de enfermedades infecciosas bacterianas, particularmente en niños menores de 2 años de edad. Basadas en el polisacárido capsular (PsC, su principal factor de virulencia, existen dos tipos de vacunas aprobadas para uso en humanos: las vacunas polisacarídicas planas y las vacunas polisacarídicas conjugadas. Quimi-Vio, la vacuna antineumocócica cubana, pertenece al segundo grupo y está compuesta por los PsC de los siete serotipos de mayor incidencia y circulación en Cuba (1, 5, 6B, 14, 18C, 19F y 23F. El objetivo de este trabajo fue realizar el ensayo de identidad de la vacuna cubana Quimi-Vio empleando los AcM contra los PsC 1, 5, 6B, 14, y 19F de Sp obtenidos recientemente en el Instituto Finlay de Vacunas, teniendo en cuenta que los Ensayos de identidad de las vacunas son requisito indispensable para la liberación final de los lotes. La técnica empleada para la realización del ensayo de identidad de Quimi-Vio fue el Dot Blot, donde empleando membrana de Nitrocelulosa se realizó la captura de tres lotes de vacuna Quimi-Vio y como control positivo de la técnica los respectivos PsC de los serotipos 1, 5, 6B, 14, y 19F sin conjugar y una vacuna comercial Prevenar-13. Para la identidad de los PsC de neumococo se emplearon los respectivos AcM a una concentración de 10µg/mL y como segundo anticuerpo anti IgG de ratón conjugado a peroxidasa teniendo en cuenta que los AcMs empleados son murinos. Cada AcM fue capaz de identificar de forma altamente especifica al PsC homologo (mismo serotipo, tanto en su forma no conjugada y monovalente como en el contexto de las vacunas Quimi-Vio y Prevenar 13V, donde además de estar conjugado al TT se encuentra mezclado con otros PsC de forma multivalente. La técnica Dot Blot empleando los AcMs contra los PsC serotipos 1, 5,6B, 14 y 19F permite identificar de forma específica cada PsC en la formulación multivalente, por lo

  8. The substitution effect of chromium on the magnetic properties of (Fe{sub 1−x}Cr{sub x}){sub 80}Si{sub 6}B{sub 14} metallic glasses (0.02≤x≤0.14)

    Energy Technology Data Exchange (ETDEWEB)

    Álvarez-Alonso, Pablo [Departamento de Electricidad y Electrónica, Universidad del País Vasco, Barrio Sarriena s/n, 48940 Leioa (Spain); Santos, J.D.; Pérez, María J. [Departamento de Física, Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain); Sánchez-Valdes, C.F.; Sánchez Llamazares, J.L. [División de Materiales Avanzados, Instituto Potosino de Investigación Científica y Tecnológica A.C., Camino a la presa San José 2055, CP 78216 San Luis Potosí (Mexico); Gorria, Pedro, E-mail: pgorria@uniovi.es [Departamento de Física, EPI, Universidad de Oviedo, 33203 Gijón (Spain)

    2013-12-15

    Magnetization studies were carried out to characterize the magnetic properties of the Iron-rich metallic glasses (Fe{sub 1−x}Cr{sub x}){sub 80}Si{sub 6}B{sub 14} with 0.02≤x≤0.14. The Curie temperature T{sub C} diminishes almost linearly with the increase in the Cr-content from 401 K (x=0.10) to 291 K (x=0.14), while the saturation magnetization M{sub S} at T=5 K also undergoes a linear reduction from 169 Am{sup 2} kg{sup −1} (x=0.02) to 87 Am{sup 2} kg{sup −1} (x=0.14). These results suggest that the system should become paramagnetic for x≈0.22. The magneto-caloric properties of samples with T{sub C} near room temperature, i.e., with x=0.12 and 0.14, were investigated up to a maximum magnetic field change of 8 T. Both ribbons are characterized by a very broad temperature dependence of the magnetic entropy change ΔS{sub M}(T) and moderate peak values of 2.9 Jkg{sup −1} K{sup −1} and 2.6 Jkg{sup −1} K{sup −1}, respectively. - Highlights: • We report on the magnetic properties of (Fe{sub 1−x}Cr{sub x}){sub 80}Si{sub 6}B{sub 14} metallic glasses with 0.02≤x≤0.14. • Curie temperature and saturation magnetization values reduce linearly as the chromium content increases. • The magneto-caloric response up to 8 T has been measured for samples with x=0.12 and 0.14.

  9. Antioxidant action of 3-mercapto-5H-1,2,4-triazino[5,6-b]indole-5-acetic acid, an efficient aldose reductase inhibitor, in a 1,1'-diphenyl-2-picrylhydrazyl assay and in the cellular system of isolated erythrocytes exposed to tert-butyl hydroperoxide.

    Science.gov (United States)

    Prnova, Marta Soltesova; Ballekova, Jana; Majekova, Magdalena; Stefek, Milan

    2015-01-01

    The subject of this study was 3-mercapto-5H-1,2,4-triazino[5,6-b]indole-5-acetic acid (compound 1), an efficient aldose reductase inhibitor of high selectivity. The antioxidant action of 1 was investigated in greater detail by employing a 1,1'-diphenyl-2-picrylhydrazyl (DPPH) test and in the system of isolated rat erythrocytes. First, the compound was subjected to the DPPH test. Second, the overall antioxidant action of the compound was studied in the cellular system of isolated rat erythrocytes oxidatively stressed by free radicals derived from the lipophilic tert-butyl hydroperoxide. The uptake kinetics of 1 was studied and osmotic fragility of the erythrocytes was evaluated. The DPPH test revealed significant antiradical activity of 1. One molecule of 1 was found to quench 1.48 ± 0.06 DPPH radicals. In the system of isolated erythrocytes, the compound was readily taken up by the cells followed by their protection against free radical-initiated hemolysis. Osmotic fragility of the erythrocytes was not affected by 1. The results demonstrated the ability of 1 to scavenge DPPH and to protect intact erythrocytes against oxidative damage induced by peroxyl radicals. By affecting both the polyol pathway and oxidative stress, the compound represents an example of a promising agent for multi-target pharmacology of diabetic complications.

  10. Effect of cooling rate on the phase structure and magnetic properties of Fe{sub 26.7}Co{sub 28.5}Ni{sub 28.5}Si{sub 4.6}B{sub 8.7}P{sub 3} high entropy alloy

    Energy Technology Data Exchange (ETDEWEB)

    Wei, Ran; Sun, Huan; Chen, Chen [School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001 (China); Han, Zhenhua [School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710068 (China); Li, Fushan, E-mail: fsli@zzu.edu.cn [School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001 (China)

    2017-08-01

    Highlights: • High entropy alloy with amorphous phase and FCC solid solution phase are successfully developed respectively. • The amorphous phase exhibits better soft magnetic properties than that of the solid solution phase. • The BCC phase transformed into FCC phase, and then into BCC phase was found in this HEA. - Abstract: The effect of cooling rate on phase structure and magnetic properties of the Fe{sub 26.7}Co{sub 28.5}Ni{sub 28.5}Si{sub 4.6}B{sub 8.7}P{sub 3} high entropy alloy (HEA) was investigated. The HEA forms into amorphous phase by melt spinning method at high cooling rate and FCC solid solution phase at low cooling rate. The soft magnetic properties of the amorphous phase (saturation magnetization B{sub s} of 1.07T and coercivity H{sub c} of 4 A/m) are better than that of the solid solution phase (B{sub s} of 1.0 T and H{sub c} of 168 A/m). In order to study the phase evolution of the present HEA, anneal experiments were conducted. It is found that crystallization products of amorphous phase are solid solution phase which constitute much of FCC and a small amount of BCC. BCC phase transforms into FCC phase, and then into BCC phase with the increase of annealing temperature.

  11. Relationship of microstructure to fracture topography in orthopedic alloys

    International Nuclear Information System (INIS)

    Gilbertson, L.N.

    1976-01-01

    Two major alloys used for orthopedic implants are 316L stainless steel and a cast cobalt--chromium--molybdenum alloy similar to Haynes Stellite 21. Another alloy that is just being introduced is Ti--6Al--4V. All three of these alloys are used in different conditions with different microstructures. Standard specimens with typical microstructures encountered in orthopedic applications were loaded to fracture in both overload and fatigue modes. Different rates of loading were also used in some cases. The fracture surfaces of these standard samples were analyzed in the Scanning Electron Microscope. An attempt was made to relate the fracture behavior, as evidenced by the fracture typography, to the microstructure of the alloy as revealed by metallography

  12. Optimization of the deposition process of corrosion resistant Stellite 6 coatings produced by laser cladding; Optimizacion del proceso de aporte de recubrimientos anticorrosion de Stellite 6 producidos mediante plaqueado laser

    Energy Technology Data Exchange (ETDEWEB)

    Vicario, I.; Soriano, C.; Sanz, C.; Bayon, R.; Leunda, J.

    2009-07-01

    Laser cladding is one of the most efficient surface treatment technologies in the industry. It uses a laser heat source to deposit a thin layer of a desired material on a moving substrate, whose properties have to be improved, achieving a metallurgical bonding between them with low heat affected zone and low dilution, compared to other conventional technologies such as PTA, TIG welding or thermal Spraying. In this sense, it is remarkable that there are 3 main application fields for laser cladding technology: restoration of refurbishment of damaged parts, surface coating against corrosion or wear, and rapid proto typing. the present work described a study of the optimization of the laser cladding of Co based coatings (Diamalloy 4060NS) on medium carbon steel C45 (AISI 1945). After laser treatment, the surface of the substrate materials is improved in terms of resistance against corrosion; this confirmed in the analysis performed afterwards. it is also shown that the corrosion barrier properties have direct correlation with the laser cladding variables. (Author) 10 refs.

  13. Pre-germination treatments for Hymenaea stigonocarpa Mart. ex Hayne seeds

    Directory of Open Access Journals (Sweden)

    Sérgio Roberto Garcia dos Santos

    2016-12-01

    Full Text Available Hymenaea stigonocarpa, known as Jatoba-do-cerrado, belongs to the family Fabaceae (Leguminosae and is included in the category "near threatened with extinction." It occurs in cerrado and cerradão areas, and its seeds have physical dormancy. Because of this characteristic, the aim of this study was to evaluate different pre-germination treatments and control in H. stigonocarpa seeds, namely: immersion in fire, sulfuric acid, hydrochloric acid, acetone, ether and hot water (100°C, and mechanical scarification of the seed coat by roughing with sandpaper or cutting with nail clippers and washing in running water for 2 hours. The parameters analyzed were percentage of germination, germination speed index (GSI and the percentage of hard and firm seeds and dead seeds. The final results were: a germination: boiling water and sulfuric acid were superior to the control; b GSI: boiling water, sulfuric acid, fire and sandpaper were superior to the control and c percentage of dead seeds was not statistically different between the different treatments and control. In conclusion, boiling water and sulfuric acid, were the best treatments, with regard to the parameters examined.

  14. Growth patterns and annual growth cycle of Acacia karroo Hayne in ...

    African Journals Online (AJOL)

    ... karroo; alice; botany; compensatory growth; condition; development; eastern cape; emergence; environmental conditions; field study; growth cycle; growth initiation; growth patterns; growth strategy; leaf growth; plant growth; savanna; shoot growth; soil depth; soil moisture; south africa; university of fort hare; water stress ...

  15. Las Matematicas: Lenguaje Universal. Grados Intermedios, Nivel 6b: Resta de Fracciones (Mathematics: A Universal Language. Intermediate Grades, Level 6b: Subtraction of Fractions).

    Science.gov (United States)

    Dissemination and Assessment Center for Bilingual Education, Austin, TX.

    This is one of a series of student booklets designed for use in a bilingual mathematics program in grades 6-8. The general format is to present each page in both Spanish and English. The mathematical topics in this booklet include subtraction of fractions and mixed numbers. (MK)

  16. Fourier techniques for an analysis of eclipsing binary light curves. Pt. 6b

    International Nuclear Information System (INIS)

    Demircan, O.

    1980-01-01

    This is a continuation of a previous paper which appeared in this journal (Demircan, 1980b) and aims at ascertaining some other relations between the integral transforms of the light curves of eclipsing binary systems. The appropriate use of these relations should facilitate the numerical computations for an analysis of eclipsing binary light curves by different Fourier techniques. (orig.)

  17. VizieR Online Data Catalog: Transiting planet WASP-6b (Tregloan-Reed+, 2015)

    Science.gov (United States)

    Tregloan-Reed, J.; Southworth, J.; Burgdorf, M.; Calchi Novati, S.; Dominik, M.; Finet, F.; Jorgensen, U. G.; Maier, G.; Mancini, L.; Prof, S.; Ricci, D.; Snodgrass, C.; Bozza, V.; Browne, P.; Dodds, P.; Gerner, T.; Harpsoe, K.; Hinse, T. C.; Hundertmark, M.; Kains, N.; Kerins, E.; Liebig, C.; Penny, M. T.; Rahvar, S.; Sahu, K.; Scarpetta, G.; Schafer, S.; Schonebeck, F.; Skottfelt, J.; Surdej, J.

    2018-05-01

    Four light curves of transits of the extrasolar planetary system WASP-6 are presented. They were obtained using the Danish 1.54m telescope at ESO La Silla, Chile, in the Bessell R passband. The errorbars for each transit have been scaled so the best-fitting model (obtained using the JKTEBOP code and without accounting for the presence of starspots) has a reduced chi-squared value of 1.0. (1 data file).

  18. MD#2183: Calibration of the IR6 B2 diamond BLMs

    CERN Document Server

    Valette, Matthieu; Lindstrom, Bjorn Hans Filip

    2018-01-01

    In case of an asynchronous beam dump with a fully filled LHC machine, causing ~40 bunches to impact on the movable dump protection absorber (TCDQ), it is expected that all standard ionisation chamber Beam Loss Monitors (IC BLM) around the LHC dumping region in IR6 will be saturated. Diamond Beam Loss Monitors (dBLM) were therefore installed next to the TCDQ downstream of the extraction kickers. These detectors allow resolving losses at a nanosecond timescale and with a dynamic range of several orders of magnitude; thus, allowing to derive the number of nominal bunches impacting the TCDQ. After a first series of calibrations using asynchronous beam dump tests, an experiment was conducted during MD#1182 to demonstrate the possibility of resolving a nominal bunch hitting the TCDQ. During this first MD only the Beam 1 dBLM was calibrated appropriately, a second calibration MD was therefore performed in 2017 for the B2 system. Results from this MD and conclusions regarding dBLM saturation with a top energy nominal...

  19. NATO Handbook on the Medical Aspects of NBC Defensive Operations AMedP-6(B)

    Science.gov (United States)

    1996-02-01

    1979. Alter, W. A., and Conklin, J. J. "Radiation Casualties" in: Handbook of Disaster Medicine . Medical Examination Publishing Co., 1983. Berdjis...disturbance produced in indoles (such as LSD) or the cannabinols (such as marihuana extracts) is not really delirium, because the casualties remain... medicinal properties similar to those of inorganic arsenic to which it is partially reduced in the body. However, no reduction to trivalent arsenic

  20. Electrochemistry of vanadocenedichloride in tetrahydrofuran and general scheme of 4B-6B subgroup metallocenedichlorides electroreduction

    International Nuclear Information System (INIS)

    Kukharenko, S.V.; Strelets, V.V.

    1987-01-01

    Mechanism of vanadocenedichloride Cp 2 VCl 2 electroreduction in THF, was investigated using polarography and cyclic voltammetry on mercury electrode. It was established that Cp 2 VCl 2 reversible single electron reduction up to metastable Cp 2 VCl 2 - which is dehalogenated reversibly with Cp 2 VCl formation takes place on the first cathode wave Cp 2 VCl irreversible single-electron reduction up to Cp 2 V proceeds on the second cathode wave. Cp 2 V reversible single-electron reduction on the third cathode wave results in formation of metastable Cp 2 V - anion as the primary product. The general scheme of electroreduction of metallocenedichlorides of transition element (Ti, Zr, Hf, V, Mo, W) series is suggested on the base of analyzing earlier obtained results

  1. 29 CFR 1990.151 - Model standard pursuant to section 6(b) of the Act.

    Science.gov (United States)

    2010-07-01

    ...) The employer shall assure that in the regulated area, food or beverages are not present or consumed... ___; (B) Engineering plans and other studies contemplated or used to determine the controls for each... circumstances). Whenever food or beverages are consumed in the workplace, the employer shall provide lunchroom...

  2. Liquid impact erosion mechanism and theoretical impact stress analysis in TiN-coated steam turbine blade materials

    International Nuclear Information System (INIS)

    Lee, M.K.; Kim, W.W.; Rhee, C.K.; Lee, W.J.

    1999-01-01

    Coating of TiN film was done by reactive magnetron sputter ion plating to improve the liquid impact erosion resistance of steam turbine blade materials, 12Cr steel and Stellite 6B, for nuclear power plant application. TiN-coated blade materials were initially deformed with depressions due to plastic deformation of the ductile substrate. The increase in the curvature in the depressions induced stress concentration with increasing number of impacts, followed by circumferential fracture of the TiN coating due to the circular propagation of cracks. The liquid impact erosion resistance of the blade materials was greatly improved by TiN coating done with the optimum ion plating condition. Damage decreased with increasing TiN coating thickness. According to the theoretical analysis of stresses generated by liquid impact, TiN coating alleviated the impact stress of 12Cr steel and Stellite 6B due to stress attenuation and stress wave reactions such as reflection and transmission at the coating-substrate interface

  3. Liquid Impact Erosion Mechanism and Theoretical Stress Analysis in TiN-Coated Turbine Blade

    International Nuclear Information System (INIS)

    Lee, M. K.; Kim, W. W.; Kim, S. J.; Rhee, C. K.; Kim, Y. S.

    2000-01-01

    Coating of TiN film was done by reactive magnetron sputter ion plating to improve the liquid impact erosion resistance of steam turbine blade materials, 12Cr steel and Stellite 6B, for nuclear power plant application. TiN coated blade materials were initially deformed with depressions due to plastic deformation of the ductile substrate. The increase in the curvature in the depressions induced stress concentration with increasing number of impacts, followed by circumferential fracture of the TiN coating due to the circular propagation of cracks. The liquid impact erosion resistance of the blade materials was greatly improved by TiN coating done with the optimum ion plating condition. Damage decreased with increasing TiN coating thickness. According to the theoretical analysis of stresses generated by liquid impact, TiN coating alleviated the impact stress of 12Cr steel and Stellite 6B due to stress attenuation and stress wave reactions such as reflection and transmission at the coating substrate interface

  4. Short Communication Mendelian inheritance, linkage, and genotypic disequilibrium in microsatellite loci of Hymenaea stigonocarpa Mart. ex Hayne (Fabaceae-Caesalpinioideae).

    Science.gov (United States)

    Moraes, M A; Kubota, T Y K; Silva, E C B; Silva, A M; Cambuim, J; Moraes, M L T; Furlani Junior, E; Sebbenn, A M

    2016-07-29

    Hymenaea stigonocarpa is a deciduous and monoecious Neotropical tree species pollinated by bats. Due to overexploitation and habitat destruction, the population size has drastically diminished in nature. No previous study has investigated Mendelian inheritance, linkage, and genotypic disequilibrium in the available microsatellite markers in this species. So, our aim was to estimate these parameters using six microsatellite loci in a sample of 470 adults and 219 juveniles from two populations of H. stigonocarpa. In addition, 30 seeds per tree from 35 seed-trees were collected. Each seed was kept record of the seed-trees and fruit origin. Based on the six microsatellite loci, we found that only 10.6% of the cases showed significant deviations from Mendelian segregation and 15.3% showed linkage. We detected no evidence of genotypic disequilibrium between the loci in the adult trees or juveniles. Thus, our results suggest that these loci can be used with great accuracy in future genetic analyses of H. stigonocarpa populations.

  5. Preparation and physicochemical properties of protein concentrate and isolate produced from Acacia tortilis (Forssk.) Hayne ssp. raddiana.

    Science.gov (United States)

    Embaby, Hassan E; Swailam, Hesham M; Rayan, Ahmed M

    2018-02-01

    The composition and physicochemical properties of defatted acacia flour (DFAF), acacia protein concentrate (APC) and acacia protein isolate (API) were evaluated. The results indicated that API had lower, ash and fat content, than DFAF and APC. Also, significant difference in protein content was noticed among DFAF, APC and API (37.5, 63.7 and 91.8%, respectively). Acacia protein concentrate and isolates were good sources of essential amino acids except cystine and methionine. The physicochemical and functional properties of acacia protein improved with the processing of acacia into protein concentrate and protein isolate. The results of scanning electron micrographs showed that DFAF had a compact structure; protein concentrate were, flaky, and porous type, and protein isolate had intact flakes morphology.

  6. The Ambiguity of Weeping. Baroque and Mannerist Discourses in Haynes' Far from Heaven and Sirk's All That Heaven Allows

    NARCIS (Netherlands)

    Post, J.A.

    2012-01-01

    Although Douglas Sirk’ All That Heaven Allows (1954) and Todd Haynes’ Far from Heaven (2002) are both characterized as melodramas, they address their spectators differently. The divergent (emotional) reactions towards both films are the effect of different rhetorical strategies: the first can be

  7. Detection of adulterated copaiba (Copaifera multijuga Hayne oil-resins by refractive index and thin layer chromatography

    Directory of Open Access Journals (Sweden)

    Karol de S. Barbosa

    Full Text Available The refractive indices (RI of the eight samples of copaiba oils, collected for this study at RDS Tupé ranged from 1.50284 to 1.50786. The thin layer chromatography (TLC plates of these oils revealed with anisaldehyde-sulphuric acid reagent showed dark lilac stains with several small stains at low Rf and a large rounded stain at high Rf. On the other hand, the twelve copaiba oils purchased at local markets presented RI between 1.48176 and 1.50886, and the TLC plates, showed as general profile blue stains, with smaller superimposed stains at low Rf, bigger superimposed stains like elongated stain at high Rf and a colorless rounded stain at middle Rf. Among 12 purchased oils at local markets, a three oil-resins presented similar RI and TLC profile to those observed for collected copaiba oils; b six oils showed same RI and TLC profiles to those observed for soybean oil; c three samples presented RI near to those showed by copaiba oil-resin, however the TLC profile was near to profile observed for a prepared mixture soybean oil: copaiba oil, two samples with 3:1 proportion and one sample with 1:3 proportion. Therefore, the RI determination and the TLC profiles could be considered rapid and efficient procedures for detection of vegetal oil in the copaiba oil-resins.

  8. Inclusion Complexes of Copaiba (Copaifera multijuga Hayne Oleoresin and Cyclodextrins: Physicochemical Characterization and Anti-Inflammatory Activity

    Directory of Open Access Journals (Sweden)

    Jonas Gabriel de Oliveira Pinheiro

    2017-11-01

    Full Text Available Complexation with cyclodextrins (CDs is a technique that has been extensively used to increase the aqueous solubility of oils and improve their stability. In addition, this technique has been used to convert oils into solid materials. This work aims to develop inclusion complexes of Copaifera multijuga oleoresin (CMO, which presents anti-inflammatory activity, with β-cyclodextrin (β-CD and hydroxypropyl-β-cyclodextrin (HP-β-CD by kneading (KND and slurry (SL methods. Physicochemical characterization was performed to verify the occurrence of interactions between CMO and the cyclodextrins. Carrageenan-induced hind paw edema in mice was carried out to evaluate the anti-inflammatory activity of CMO alone as well as complexed with CDs. Physicochemical characterization confirmed the formation of inclusion complex of CMO with both β-CD and HP-β-CD by KND and SL methods. Carrageenan-induced paw edema test showed that the anti-inflammatory activity of CMO was maintained after complexation with β-CD and HP-β-CD, where they were able to decrease the levels of nitrite and myeloperoxidase. In conclusion, this study showed that it is possible to produce inclusion complexes of CMO with CDs by KND and SL methods without any change in CMO’s anti-inflammatory activity.

  9. Improved hardness of laser alloyed X12CrNiMo martensitic stainless steel

    CSIR Research Space (South Africa)

    Adebiyi, DI

    2011-07-01

    Full Text Available The improvement in hardness of X12CrNiMo martensitic stainless steel laser alloyed with 99.9% pure titanium carbide, stellite 6 and two cases of premixed ratio of titanium carbide and stellite 6 [TiC (30 wt.%)- stellite 6 (70 wt.%) and TiC (70 wt...

  10. 75 FR 24757 - Order Making Fiscal Year 2011 Annual Adjustments to the Fee Rates Applicable Under Section 6(b...

    Science.gov (United States)

    2010-05-05

    ... collect assessments from national securities exchanges and national securities associations for round turn... average model [Delta] t = [alpha] + [beta]e t-1 + e t , where e t denotes the forecast error for month t... realization of [Delta] t . The forecast error is expressed as e t = [Delta] t -[alpha]-[beta]e t-1 . The model...

  11. Application of 5700.6B, quality assurance, to ES and H programs: Mound's approach and results

    International Nuclear Information System (INIS)

    Edling, D.A.

    1985-01-01

    Quality Assurance has always been integral to Mound's production and support operations. Weapons material and other designated material for WR programs are processed and controlled per the requirements of DOE/AL Quality Control Policy QC-1. Mound's non-WR activities, such as siting, design, construction, testing, operation, maintenance, development and production of materials, components, and systems, and acquisition of research and technology data are to be processed and controlled per the requirements of AL Order 5700.6. This paper presents an overview of the entire Quality Assurance Program at Mound and specifically addresses Mound's formal application of Quality Assurance to our comprehensive Environmental, Safety and Health (ES and H) Programs. 4 figures, 1 table

  12. 4,10-Diallyloxy-1,2,3,6b,7,8,9,12b-octahydroperylene

    Directory of Open Access Journals (Sweden)

    Terrill D. Smith

    2010-01-01

    Full Text Available In the title compound, C26H28O2, the central atoms are coplanar, with the –CH2—CH2– links of the cyclohexene groups lying to either side of the plane and with the diallyloxy residues twisted out of this plane [C—C—O—C torsion angles = 16.6 (3 and −13.9 (3°]. In the crystal structure, molecules are connected into chains propagating in [100] via C—H...π interactions.

  13. Homocyst(e)ine metabolism in hemodialysis patients treated with vitamins B6, B12 and folate.

    Science.gov (United States)

    Henning, B F; Zidek, W; Riezler, R; Graefe, U; Tepel, M

    2001-03-01

    Hyperhomocyst(e)inemia is commonly accepted as an independent atherosclerotic risk factor. In most hemodialysis patients, serum homocyst(e)ine is markedly elevated and may contribute to premature atherosclerosis in these patients. Whereas the beneficial effect of folate supplementation on serum homocyst(e)ine has been extensively studied, there are less detailed studies on the effects of cobalamin and pyridoxal phosphate alone, or in combination with folate. We examined the effect of a four-week course of intravenous treatment with folate (1.1 mg), cobalamin (1.0 mg), and pyridoxal phosphate (5.0 mg), administered once (group 1), twice (group 2) or thrice (group 3) weekly in 33 hemodialysis patients divided in three groups of 11 patients. All patients were followed for a further four weeks after treatment was stopped. Serum homocyst(e)ine, cobalamin, folate and pyridoxal phosphate, as well as the metabolites of homocyst(e)ine, methylmalonate, 2-methylcitrate and cystathionine, were determined before, during and after treatment. Baseline serum homocyst(e)ine correlated significantly with serum folate (P=0.0149), cobalamin (P=0.0047) and pyridoxal phosphate (P=0.0408). Correlations independent from the other metabolites or vitamins were found for methylmalonate (P=0.003) and folate (P=0.029). All regimens increased serum cobalamin significantly (in group 1 from 444 +/- 215 to 17,303 +/- 11,989 pg/ml, Pine was lowered significantly by 39.8% +/- 31.9% (Pine levels. Increasing cobalamin levels and additional treatment with folate and pyridoxal phosphate 156 may decrease serum homocyst(e)ine in the same way as high doses of folate alone.

  14. Control rod upper pin and roller removal and replacement

    International Nuclear Information System (INIS)

    Giordano, B.

    1995-01-01

    There has been increasing utility interest in removing cobalt sources as a means to minimize dose rates and shipping costs associated with operations, maintenance, shipping and radioactive waste disposal. This activation product accounts for approximately 80% of the dose rates at a plant. Estimates suggest that older (original equipment) control rod blades (CRBs) using stellite rollers and Haynes Alloy 25 pins can contribute as much as 43% of the cobalt in the plant. Since CRBs are the most concentrated source of cobalt in the reactor vessel, pin and roller (P ampersand R) replacement will provide significant reductions in cobalt-60 levels. The reductions will be measurable within 2 years, and should plateau within 5 to 6 years. This paper described a new, simple, cost effective, field proven in-situ method to replace these high source term contributing components and return the CRB to the reactor core for continued service. The paper also briefly describes a methodology that has been developed to estimate the labor and material costs along with a man-rem dollar savings for removal of the upper P ampersand Rs from in-service CRBs purchased prior to 1982. This method permits comparison to the cost of early replacement of CRBs. The result of this study is an EXCEL spreadsheet cost/benefit analysis that can be made plant specific by incorporation of plant data. The Analysis shows that the removal of P ampersand Rs can be beneficial for a Co-60 contribution as low as 5-10%. Recent interest by non-utility radioactive material users in obtaining the removed P ampersand Rs may further increase the benefit and reduce the cost associated with in-situ removal

  15. The European single currency project and the concept of convergence for European welfare states – the ideal and the reality / Philip Haynes

    Index Scriptorium Estoniae

    Haynes, Philip

    2013-01-01

    Artiklis analüüsitakse, kas euroalasse kuuluvad riigid (sh Eesti) on heaolult (nt tööhõive, vaesusrisk, sotsiaalkulud per head jne.) lähenenud üksteisele ning millised on seda soodustavad tegurid

  16. Descriptions and characterizations of water-level data and groundwater flow for the Brewster Boulevard and Castle Hayne Aquifer Systems and the Tarawa Terrace Aquifer

    Science.gov (United States)

    Faye, Robert E.; Jones, L. Elliott; Suárez-Soto, René J.

    2013-01-01

    This supplement of Chapter A (Supplement 3) summarizes results of analyses of groundwater-level data and describes corresponding elements of groundwater flow such as vertical hydraulic gradients useful for groundwater-flow model calibration. Field data as well as theoretical concepts indicate that potentiometric surfaces within the study area are shown to resemble to a large degree a subdued replica of surface topography. Consequently, precipitation that infiltrates to the water table flows laterally from highland to lowland areas and eventually discharges to streams such as Northeast and Wallace Creeks and New River. Vertically downward hydraulic gradients occur in highland areas resulting in the transfer of groundwater from shallow relatively unconfined aquifers to underlying confined or semi-confined aquifers. Conversely, in the vicinity of large streams such as Wallace and Frenchs Creeks, diffuse upward leakage occurs from underlying confined or semi-confined aquifers. Point water-level data indicating water-table altitudes, water-table altitudes estimated using a regression equation, and estimates of stream levels determined from a digital elevation model (DEM) and topographic maps were used to estimate a predevelopment water-table surface in the study area. Approximate flow lines along hydraulic gradients are shown on a predevelopment potentiometric surface map and extend from highland areas where potentiometric levels are greatest toward streams such as Wallace Creek and Northeast Creek. The distribution of potentiometric levels and corresponding groundwater-flow directions conform closely to related descriptions of the conceptual model.

  17. Growth, biomass production and photosynthesis of Cenchrus ciliaris L. under Acacia tortilis (Forssk.) Hayne based silvopastoral systems in semi arid tropics.

    Science.gov (United States)

    Mishra, A K; Tiwari, H S; Bhatt, R K

    2010-11-01

    The growth, biomass production and photosynthesis of Cenchrus ciliaris was studied under the canopies of 17 yr old Acacia tortilis trees in semi arid tropical environment. On an average the full grown canopy of A. tortilis at the spacing of 4 x 4 m allowed 55% of total Photosynthetically Active Radiation (PAR) which in turn increased Relative Humidity (RH) and reduced under canopy temperature to -1.75 degrees C over the open air temperature. C. ciliaris attained higher height under the shade of A. tortilis. The tiller production and leaf area index decreased marginally under the shade of tree canopies as compared to the open grown grasses. C. ciliaris accumulated higher chlorophyll a and b under the shade of tree canopies indicating its shade adaptation potential. The assimilatory functions such as rate of photosynthesis, transpiration, stomatal conductance, photosynthetic water use efficiency (PN/TR) and carboxylation efficiency (PN/CINT) decreased under the tree canopies due to low availability of PAR. The total biomass production in term of fresh and dry weight decreased under the tree canopies. On average of 2 yr C. ciliaris had produced 12.78 t ha(-1) green and 3.72 -t ha(-1) dry biomass under the tree canopies of A. tortilis. The dry matter yield reduced to 38% under the tree canopies over the open grown grasses. The A. tortilis + C. ciliaris maintained higher soil moisture, organic carbon content and available N P K for sustainable biomass production for the longer period. The higher accumulation of crude protein, starch, sugar and nitrogen in leaves and stem of C. ciliaris indicates that this grass species also maintained its quality under A. tortilis based silvopastoral system. The photosynthesis and dry matter accumulation are closely associated with available PAR indicating that for sustainable production of this grass species in the silvopasture systems for longer period about 55% or more PAR is required.

  18. Étude du soudage LASER Yb : YAG homogène et hétérogène des superalliages Hastelloy X et Haynes 188

    OpenAIRE

    Graneix, Jérémie

    2015-01-01

    De nos jours, la complexité des pièces mécaniques est de plus en plus grande dans de nombreux secteurs industriels de pointes tels que l’aéronautique, l’aérospatiale ou bien encore le domaine médical. Pour répondre à ces nouvelles exigences, notamment en termes de géométrie, de nouvelles techniques de conception et de fabrication automatisées intègrant également une meilleure traçabilité des pièces, sont mises en place. Ce travail de thèse s’est inscrit dans un projet partenarial entre le Lab...

  19. Thermodynamic Assessment of Hot Corrosion Mechanisms of Superalloys Hastelloy N and Haynes 242 in Eutectic Mixture of Molten Salts KF and ZrF4

    Energy Technology Data Exchange (ETDEWEB)

    Michael V. Glazoff

    2012-02-01

    The KF - ZrF4 system was considered for the application as a heat exchange agent in molten salt nuclear reactors (MSRs) beginning with the work carried out at ORNL in early fifties. Based on a combination of excellent properties such as thermal conductivity, viscosity in the molten state, and other thermo-physical and rheological properties, it was selected as one of possible candidates for the nuclear reactor secondary heat exchanger loop.

  20. THE CANOPY EFFECTS OF Prosopis juliflora (DC. AND Acacia tortilis (HAYNE TREES ON HERBACEOUS PLANTS SPECIES AND SOIL PHYSICO-CHEMICAL PROPERTIES IN NJEMPS FLATS, KENYA

    Directory of Open Access Journals (Sweden)

    Henry C. Kahi

    2009-03-01

    Full Text Available The canopy effects of an exotic and indigenous tree species on soil properties and understorey herbaceous plant species were investigated on the Njemps Flats, Baringo district, Kenya. Samples of soil and herbaceous plant species were obtained within the canopies of systematically selected P. juliflora (exotic and A. tortilis (indigenous trees, and from adjacent open areas. Standing biomass, frequency and cover of understorey plant species were significantly (P

  1. Multiaxial Creep-Fatigue and Creep-Ratcheting Failures of Grade 91 and Haynes 230 Alloys Toward Addressing Design Issues of Gen IV Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Hassan, Tasnim [North Carolina State Univ., Raleigh, NC (United States); Lissenden, Cliff [Penn State Univ., University Park, PA (United States); Carroll, Laura [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-04-01

    The proposed research will develop systematic sets of uniaxial and multiaxial experimental data at a very high temperature (850-950°C) for Alloy 617. The loading histories to be prescribed in the experiments will induce creep-fatigue and creep-ratcheting failure mechanisms. These experimental responses will be scrutinized in order to quantify the influences of temperature and creep on fatigue and ratcheting failures. A unified constitutive model (UCM) will be developed and validated against these experimental responses. The improved UCM will be incorporated into the widely used finite element commercial software packages ANSYS. The modified ANSYS will be validated so that it can be used for evaluating the very high temperature ASME-NH design-by-analysis methodology for Alloy 617 and thereby addressing the ASME-NH design code issues.

  2. Multiaxial Creep-Fatigue and Creep-Ratcheting Failures of Grade 91 and Haynes 230 Alloys Toward Addressing Design Issues of Gen IV Nuclear Power Plants

    International Nuclear Information System (INIS)

    Hassan, Tasnim; Lissenden, Cliff; Carroll, Laura

    2015-01-01

    The proposed research will develop systematic sets of uniaxial and multiaxial experimental data at a very high temperature (850-950°C) for Alloy 617. The loading histories to be prescribed in the experiments will induce creep-fatigue and creep-ratcheting failure mechanisms. These experimental responses will be scrutinized in order to quantify the influences of temperature and creep on fatigue and ratcheting failures. A unified constitutive model (UCM) will be developed and validated against these experimental responses. The improved UCM will be incorporated into the widely used finite element commercial software packages ANSYS. The modified ANSYS will be validated so that it can be used for evaluating the very high temperature ASME-NH design-by-analysis methodology for Alloy 617 and thereby addressing the ASME-NH design code issues.

  3. 76 FR 6536 - Airworthiness Directives; Bombardier, Inc. Model CL-215-1A10 (CL-215), CL-215-6B11 (CL-215T...

    Science.gov (United States)

    2011-02-07

    ... the number of flight cycles accumulated by each of the applicable accumulators (i.e., brake, aileron, elevator, and rudder accumulators) having part number (P/N) 08-8423-010 (MS28700- 3) installed on the...

  4. 76 FR 34014 - Airworthiness Directives; Bombardier, Inc. Model CL-215-1A10, CL-215-6B11 (CL-215T Variant), and...

    Science.gov (United States)

    2011-06-10

    ... either universal solid (round head) rivets or flush rivets of the bracket assembly of the emergency water... their substance. But we might have found it necessary to use different words from those in the MCAI to..., whichever occurs first, do a general visual inspection to determine if either universal solid (round head...

  5. Human Health Exposure Assessment for Rocky Mountain Arsenal Study Area Evaluations. Volume 6-B. Western Study Area Exposure Assessment Version 4.1

    Science.gov (United States)

    1990-09-01

    Prpae f9 r FIUR ?--81L C)ora 2Aagv 61iefrPoe n hs lAnl sDtceRocky~ ~ ~ ~~~~~~~~91 O~~iiAsea lau IthnoLbv ndctrLvl Abar~~~ ge14 15~ rigE 0.4n, ar

  6. Application of thiopropyl sepharose 6B for removal of PCR inhibitors from DNA extracts of a thigh bone recovered from the sea

    DEFF Research Database (Denmark)

    Sørensen, Erik; Hansen, Steen Holger; Eriksen, Birthe

    2003-01-01

    for the removal of PCR inhibitors in DNA extracts originating from stains on clothing. Here we show that TS is efficient also for the removal of inhibitors from PCR extracts from a highly decomposed human thigh bone. TS treatment, however, leads to a substantial loss of DNA making the technique best suited when...

  7. Bioclim Deliverable D6b: application of statistical down-scaling within the BIOCLIM hierarchical strategy: methods, data requirements and underlying assumptions

    International Nuclear Information System (INIS)

    2004-01-01

    The overall aim of BIOCLIM is to assess the possible long term impacts due to climate change on the safety of radioactive waste repositories in deep formations. The coarse spatial scale of the Earth-system Models of Intermediate Complexity (EMICs) used in BIOCLIM compared with the BIOCLIM study regions and the needs of performance assessment creates a need for down-scaling. Most of the developmental work on down-scaling methodologies undertaken by the international research community has focused on down-scaling from the general circulation model (GCM) scale (with a typical spatial resolution of 400 km by 400 km over Europe in the current generation of models) using dynamical down-scaling (i.e., regional climate models (RCMs), which typically have a spatial resolution of 50 km by 50 km for models whose domain covers the European region) or statistical methods (which can provide information at the point or station scale) in order to construct scenarios of anthropogenic climate change up to 2100. Dynamical down-scaling (with the MAR RCM) is used in BIOCLIM WP2 to down-scale from the GCM (i.e., IPSL C M4 D ) scale. In the original BIOCLIM description of work, it was proposed that UEA would apply statistical down-scaling to IPSL C M4 D output in WP2 as part of the hierarchical strategy. Statistical down-scaling requires the identification of statistical relationships between the observed large-scale and regional/local climate, which are then applied to large-scale GCM output, on the assumption that these relationships remain valid in the future (the assumption of stationarity). Thus it was proposed that UEA would investigate the extent to which it is possible to apply relationships between the present-day large-scale and regional/local climate to the relatively extreme conditions of the BIOCLIM WP2 snapshot simulations. Potential statistical down-scaling methodologies were identified from previous work performed at UEA. Appropriate station data from the case-study regions were identified, together with the additional issues which arise in applying these techniques to output from the BIOCLIM simulations. This preliminary work is described in this BIOCLIM technical note. It provides an overview of statistical down-scaling methods, together with their underlying assumptions and advantages/disadvantages. Specific issues relating to their application within the BIOCLIM context (i.e., application to the IPSL C M4 D snapshot simulations) are identified, for example, the stationarity issue. The predictor and predictand data sets that would be required to implement these methods within the BIOCLIM hierarchical strategy are also outlined, together with the methodological steps involved. Implementation of these techniques was delayed in order to give priority to the application of the rule-based down-scaling method developed in WP3 to WP2 EMIC output (see Deliverable D8a). This task was not originally planned, but has allowed more comprehensive comparison and evaluation of the BIOCLIM scenarios and down-scaling methods to be undertaken

  8. The Histone Lysine Demethylase JMJD3/KDM6B Is Recruited to p53 Bound Promoters and Enhancer Elements in a p53 Dependent Manner

    DEFF Research Database (Denmark)

    Williams, Kristine; Christensen, Jesper; Rappsilber, Juri

    2014-01-01

    linked to the regulation of different biological processes such as differentiation of embryonic stem cells, inflammatory responses in macrophages, and induction of cellular senescence via regulation of the INK4A-ARF locus. Here we show here that JMJD3 interacts with the tumour suppressor protein p53. We...... find that the interaction is dependent on the p53 tetramerization domain. Following DNA damage, JMJD3 is transcriptionally upregulated and by performing genome-wide mapping of JMJD3, we demonstrate that it binds genes involved in basic cellular processes, as well as genes regulating cell cycle......, response to stress and apoptosis. Moreover, we find that JMJD3 binding sites show significant overlap with p53 bound promoters and enhancer elements. The binding of JMJD3 to p53 target sites is increased in response to DNA damage, and we demonstrate that the recruitment of JMJD3 to these sites is dependent...

  9. A central role for CK1 in catalysing phosphorylation of the P53 transactivation domain at serine 20 after HHV-6B viral infection

    DEFF Research Database (Denmark)

    Maclaine, NJ; Øster, Bodil; Bundgaard, Bettina

    2008-01-01

    The tumour suppressor protein p53 is activated by distinct cellular stresses including radiation, hypoxia, type-I interferon, and DNA/RNA virus infection. The transactivation domain of p53 contains a phosphorylation site at serine 20 (Ser20) whose modification stabilises the binding of the transc...... was not blocked by D4476. These data highlight a central role for CK1 as the Ser20-site kinase for p53 in DNA virus-infected cells, but also suggest that distinct stresses may selectively trigger different protein kinases to modify the transactivation domain of p53 at Ser20....

  10. Evaluation of synergistic antimicrobial effect of vitamins (A, B1, B2, B6, B12, C, D, E and K) with antibiotics against resistant bacterial strains.

    Science.gov (United States)

    Shahzad, Shakeel; Ashraf, M Adnan; Sajid, M; Shahzad, Aqeel; Rafique, Azhar; Mahmood, M Shahid

    2018-02-02

    Multiple drug resistant super bugs of Acinetobacter baumannii and methicillin-resistant Staphylococcus aureus (MRSA) are becoming challenge for healthcare professionals. In this study, vitamins were evaluated for synergistic activity with the antibiotics. Synergistic effect between antibiotic and stock solutions of vitamins is evaluated by using Kirby-Bauer disc diffusion assay. Distilled water and propylene glycol were used as solvent for water soluble vitamins and fat-soluble vitamins respectively. The final concentration of 10mg/ml of each water-soluble vitamin B1 (Thiamine), B2 (Riboflavin), B6 (Pyridoxine) B12 (Methylcobalamin), C (Ascorbic acid) and 0.1mg/ml of each fat soluble vitamin A (retinol), D (cholecalciferol) E (αTocopherol) K (Menadione) were used with the antibiotics. The results depicted that vitamin K and E have better synergistic activity with piperacillin-tazobactam, imipenem and doripenem antibiotics against A. baumannii. While vitamin B1, B2 and B12 showed remarkable synergistic activity with linezolid against MRSA. Vitamin B1 was further tested to have better synergism with antibiotics oxacillin, tetracycline, rifampicin and linezolid against MRSA. The fat-soluble vitamins E and K were good in synergism against Gram negative A. baumannii while water soluble vitamins as B1, B2 and B12 were effective against MRSA but not against A. baumannii. This synergistic action of vitamins with the antibiotics can be used as a tool to treat multiple drug resistant super bugs with further evaluation at molecular level. Copyright © 2018 International Society for Chemotherapy of Infection and Cancer. Published by Elsevier Ltd. All rights reserved.

  11. Vitaminas B12, B6, B9 e homocisteína e sua relação com a massa óssea em idosos

    OpenAIRE

    Coussirat,Caroline; Batista,Caroline; Schneider,Rodolfo Herberto; Resende,Thais de Lima; Schwanke,Carla Helena Augustin

    2012-01-01

    O número de idosos nos últimos anos tem apresentado incremento em todo o mundo, o que acaba gerando inúmeras preocupações com a saúde dessa população, já que nessa fase da vida as alterações fisiológicas os tornam mais propensos a doenças, principalmente as crônicas não-transmissíveis. A osteoporose, uma doença osteometabólica frequente nos idosos, torna-se alvo de importantes estudos, uma vez que suas consequências afetam tanto a saúde física quanto a psicossocial. Contudo, são diversos os f...

  12. AVALIAÇÃO DE PROPRIEDADES FÍSICAS E MECÂNICAS DE MADEIRAS DE JATOBÁ (Hymenaea stilbocarpa Hayne COM DIFERENTES TEORES DE UMIDADE E EXTRAÍDAS DE REGIÕES DISTINTAS1

    Directory of Open Access Journals (Sweden)

    Francisco Antonio Rocco Lahr

    2016-02-01

    Full Text Available RESUMO Este trabalho objetivou investigar a influência das regiões de extração (Municípios de Caracaraí e Bonfim, Sul de Roraima; Município de Alta Floresta, Norte de Mato Grosso da madeira da espécie jatobá (Hymenaea stilbocarpa. Também, foi avaliada a influência do teor de umidade (madeira saturada e a 12% em 15 propriedades físicas e mecânicas de interesse. Ao todo, foram preparados e ensaiados, segundo as prescrições da Norma Brasileira ABNT NR 7190 (1997, 840 corpos de prova. Os resultados da análise de variância (a 5% de significância revelaram que a região de extração dos corpos de prova não foi significativa nas propriedades físicas e mecânicas avaliadas, pois foram obtidos valores equivalentes, independentemente da origem, aspecto altamente interessante à medida que nem sempre é possível identificar a região de onde provém a madeira tropical. Essa importância é ainda maior no caso do emprego da madeira como elemento, cujos valores de referência se encontram apontados nos anexos do referido documento normativo. Com relação ao teor de umidade, foi observada diferença significativa em oito das 15 propriedades avaliadas. A condição de 12% de teor de umidade apresentou valores médios superiores à condição saturada nas propriedades de resistência na compressão paralela (37%, resistência na tração paralela (29% e cisalhamento (36% na direção paralela às fibras; módulo de resistência na flexão (26%, módulo de elasticidade na compressão paralela (9% e 200 direções paralelas (35% e normal (28% às fibras; e inferior na densidade aparente.

  13. Phytochemical and Antibacterial Investigations of the Extracts and Fractions from the Stem Bark of Hymenaea stigonocarpa Mart. ex Hayne and Effect on Ultrastructure of Staphylococcus aureus Induced by Hydroalcoholic Extract

    Directory of Open Access Journals (Sweden)

    Gustavo Santiago Dimech

    2013-01-01

    Full Text Available The aim of this study was to investigate the antimicrobial activity of different extracts and fractions obtained from Hymenaea stigonocarpa stem barks. The cyclohexanic, ethyl acetate, ethanol, aqueous, and hydroalcoholic extracts were obtained by maceration. The hydroalcoholic extract was partitioned, which resulted in the ethyl acetate and aqueous fractions. All extracts and fractions were subjected to phytochemical screening and evaluation of total phenol and tannin contents. An HPLC-DAD and ultrastructural alterations analysis were performed. Terpenes and coumarins were detected in the cyclohexanic extract. Flavonoids and condensed tannins were present in the other extracts and fractions. The extracts with the highest contents of tannins, ethanol (EE, hydroalcoholic (HE, and aqueous fraction (AF showed also the highest antimicrobial activity. The MIC values ranged from 64 to 526 µg/mL. The chromatographic fingerprints suggest the presence of astilbin and other flavonoids in EE and HE. Presence of the thick cell wall, undulating outer layer, abnormal septa, and leakage of the cytoplasmic contents and absence of cell wall and cell lyses were the main alterations observed on Staphylococcus aureus ATCC 33591 after treatment with the Hymenaea stigonocarpa hydroalcoholic extract. The presence of phenolic compounds like flavonoids and tannins is possibly the reason for the antimicrobial activity.

  14. America’s Black Air Pioneers, 1900-1939

    Science.gov (United States)

    1988-04-01

    28 October 1911, p. 11. 22Barbour, "Early Black Flyers," 98; Elizabeth Ross Haynes, The Black Boy of Atlanta[: A Bioqraphy of Richard Robert Wright...event in 1911 (see above). By the late 1930s Wright had moved to Philadelphia and was a successful banker; see Haynes, Black Boy of Atlanta, pp. 157-58...Haynes, Elizabeth Ross. The Black Boy of Atlanta[: A Biography of Richard Robert Wright, Sr.]. Boston: House of Edinboro, 1952. Hopkins, George E

  15. Rare ginsenoside Ia synthesized from F1 by cloning and overexpression of the UDP-glycosyltransferase gene from Bacillus subtilis: synthesis, characterization, and in vitro melanogenesis inhibition activity in BL6B16 cells.

    Science.gov (United States)

    Wang, Dan-Dan; Jin, Yan; Wang, Chao; Kim, Yeon-Ju; Perez, Zuly Elizabeth Jimenez; Baek, Nam In; Mathiyalagan, Ramya; Markus, Josua; Yang, Deok-Chun

    2018-01-01

    Ginsenoside F1 has been described to possess skin-whitening effects on humans. We aimed to synthesize a new ginsenoside derivative from F1 and investigate its cytotoxicity and melanogenesis inhibitory activity in B16BL6 cells using recombinant glycosyltransferase enzyme. Glycosylation has the advantage of synthesizing rare chemical compounds from common compounds with great ease. UDP-glycosyltransferase (BSGT1) gene from Bacillus subtilis was selected for cloning. The recombinant glycosyltransferase enzyme was purified, characterized, and utilized to enzymatically transform F1 into its derivative. The new product was characterized by NMR techniques and evaluated by MTT, melanin count, and tyrosinase inhibition assay. The new derivative was identified as (20 S )-3 β ,6 α ,12 β ,20-tetrahydroxydammar-24-ene-20- O - β -D-glucopyranosyl-3- O - β -D-glucopyranoside (ginsenoside Ia), which possesses an additional glucose linked into the C-3 position of substrate F1. Ia had been previously reported; however, no in vitro biological activity was further examined. This study focused on the mass production of arduous ginsenoside Ia from accessible F1 and its inhibitory effect of melanogenesis in B16BL6 cells. Ia showed greater inhibition of melanin and tyrosinase at 100 μmol/L than F1 and arbutin. These results suggested that Ia decreased cellular melanin synthesis in B16BL6 cells through downregulation of tyrosinase activity. To our knowledge, this is the first study to report on the mass production of rare ginsenoside Ia from F1 using recombinant UDP-glycosyltransferase isolated from B. subtillis and its superior melanogenesis inhibitory activity in B16BL6 cells as compared to its precursor. In brief, ginsenoside Ia can be applied for further study in cosmetics.

  16. Enzymatic hydrolysis of multi-use forage energy crops, year 2 report: Studies on the improvement of reaction conditions, differences between forages. SRC technical report No. 141, and SRC publication No. C-711-6-B-83

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, L.J.; Coxworth, E.C.

    1983-12-31

    The main objective of the work described in this report is to optimize the conversion of forages and crop residues to simple sugars, and to determine the quantity of protein that can be readily recovered after enzymatic hydrolysis of those materials. The simple sugars would be used as substrates for fermentation to fuels and chemicals, and the protein is a potentially valuable byproduct for use as fertilizer or feed. The plant materials studied were kochia, Jerusalem artichoke, pea stem and chaff, oilseed radish, alfalfa, and slender wheat grass. The enzymes used in the hydrolysis were Onozuka R-10, Celluclast 200L Type N, and cellobiase 250L. Results reported include comparisons of enzymatic reactivity of the materials studied, the quantity of protein remaining after treatment, and the dry matter solubility of the materials achieved using the different enzymes.

  17. NDA techniques for spent fuel verification and radiation monitoring. Report on activities 6a and 6b of Task JNT C799 (SAGOR). Finnish support programme to the IAEA safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Tarvainen, M [Finnish Centre for Radiation and Nuclear Safety, Helsinki (Finland); Levai, F [Technical Univ., Budabest (Hungary); Valentine, T E [Oak Ridge National Lab., TN (United States); Abhold, M [Los Alamos National Lab., NM (United States); Moran, B [USNRC, Washington, DC (United States)

    1997-08-01

    A variety of NDA methods exist for measurement of spent fuel at various stages of the disposition process. Each of the methods has weaknesses and strengths that make them applicable to one or more stages in disposition. Both passive and active methods are, under favorable conditions, capable of providing either a mapping of an assembly to identify missing fuel pins or a measurement of the fissile content and some are capable of providing a mapping of a canister to identify missing assemblies or a measurement of the fissile content. However, a spent fuel measurement system capable of making routine partial defect tests of spent fuel assemblies is missing. The active NDA methods, in particular, the active neutron methods, hold the most promise for providing quantitative measurements on fuel assemblies and canisters. Application of NDA methods to shielded casks may not be practical or even possible due to the extent of radiation attenuation by the shielding materials, and none of these methods are considered to have potential for quantitative measurements once the spent fuel cask has been placed in a repository. The most practical approach to spent fuel verification is to confirm the characteristics of the spent fuel prior to loading in a canister or cask at the conditioning facility. Fissile material tracking systems in addition to containment and surveillance methods have the capability to assure continuity of the verified knowledge of the sample from loading of the canisters to final disposal and closing of the repository. (orig.). 49 refs.

  18. Synthesis and docking analysis of new heterocyclic system of tetrazolo[5',1':2,3][1,3,4]thiadiazepino [7,6-b]quinolines as aldose reductase inhibitors

    Directory of Open Access Journals (Sweden)

    Mohammad Saadatmandzadeh

    2014-09-01

    Conclusion: All of the best models formed strong hydrogen bonds with Trp 111 and Tyr 209 via tetrazole moiety. It was found that pi-pi interaction between Tyr 209, Trp 20 and His 110 side chain and quinolin moiety was one of the common factors in enzyme-inhibitor junction. It was found that both hydrogen bonding and hydrophobic interactions are important in the structure and function of biological molecules, especially for inhibition in a complex.

  19. Ring-expansion synthesis and crystal structure of dimethyl 4-ethyl-1,4,5,6,7,8-hexahydroazonino[5,6-b]indole-2,3-dicarboxylate

    Directory of Open Access Journals (Sweden)

    Van Tuyen Nguyen

    2017-03-01

    Full Text Available The title compound, C20H24N2O4, is the product of a ring-expansion reaction from a seven-membered hexahydroazepine to a nine-membered azonine. The azonine ring of the molecule adopts a chair–boat conformation. In the crystal, molecules are linked by bifurcated N—H...(O,O hydrogen bonds, generating [010] zigzag chains. The title compound shows inhibitory activity against acetylcholinesterase and butyrylcholinesterase, and might be considered as a candidate for the design of new types of anti-Alzheimer's drugs.

  20. NDA techniques for spent fuel verification and radiation monitoring. Report on activities 6a and 6b of Task JNT C799 (SAGOR). Finnish support programme to the IAEA safeguards

    International Nuclear Information System (INIS)

    Tarvainen, M.; Levai, F.; Valentine, T.E.; Abhold, M.; Moran, B.

    1997-08-01

    A variety of NDA methods exist for measurement of spent fuel at various stages of the disposition process. Each of the methods has weaknesses and strengths that make them applicable to one or more stages in disposition. Both passive and active methods are, under favorable conditions, capable of providing either a mapping of an assembly to identify missing fuel pins or a measurement of the fissile content and some are capable of providing a mapping of a canister to identify missing assemblies or a measurement of the fissile content. However, a spent fuel measurement system capable of making routine partial defect tests of spent fuel assemblies is missing. The active NDA methods, in particular, the active neutron methods, hold the most promise for providing quantitative measurements on fuel assemblies and canisters. Application of NDA methods to shielded casks may not be practical or even possible due to the extent of radiation attenuation by the shielding materials, and none of these methods are considered to have potential for quantitative measurements once the spent fuel cask has been placed in a repository. The most practical approach to spent fuel verification is to confirm the characteristics of the spent fuel prior to loading in a canister or cask at the conditioning facility. Fissile material tracking systems in addition to containment and surveillance methods have the capability to assure continuity of the verified knowledge of the sample from loading of the canisters to final disposal and closing of the repository. (orig.)

  1. All solutions of the Diophantine equation a^6+b^6=c^6+d^6+e^6+f^6+g^6 for a,b,c,d,e,f,g < 250000 found with a distributed Boinc project

    OpenAIRE

    Gerbicz, Robert; Meyrignac, Jean-Charles; Beckert, Uwe

    2011-01-01

    The above equation is also called as Euler(6,2,5) system. By computational aspect these systems are very interesting. And we can also apply these methods to other Diophantine equations. We give a brief history of these systems and how we searched for these big solutions on Boinc. Our two Boinc projects ran from April of 2010 to July of 2011.

  2. Rough order of magnitude cost estimate for immobilization of 18.2 MT of plutonium using new facilities at the Savannah River site: alternatives 3A/5A/6A/6B/7A/9A

    International Nuclear Information System (INIS)

    DiSabatino, A.

    1998-01-01

    The purpose of this Cost Estimate Report is to identify preliminary capital and operating costs for a facility to immobilize 18.2 metric tons (nominal) of plutonium using ceramic in a new facility at Savannah River Site (SRS)

  3. Reassessment and suspension of the nuclear power plant design requirement of the constraint of collective dose per unit of practice. (Requirement 6 (b), Standard AR 3.1.2)

    International Nuclear Information System (INIS)

    Amado, Valeria A.; Canoba, Analia C.; Curti, Adriana R.; Biaggio, Alfredo L.

    2009-01-01

    By the middle of 2005, the Nuclear Regulatory Authority (ARN) decided to re-assess the basis of a design requirement applicable to the limitation of nuclear power reactor radioactive discharges. Such requirement, aimed at restricting the discharge of globally dispersed long-lived radionuclides, was in force in Argentina since 1979 and was expressed as a limitation of the collective dose commitment per unit of electrical energy generated. The practical result of such regulatory action was the need to retain C-14 in the Atucha II power reactor under construction as well as in future heavy water reactors to be built in the country, and, later on, to manage it as to assure its isolation from the biosphere during an appropriate period of time. For the above-mentioned reassessment, an ad hoc task group was created and an internal report was presented to the Board of Directors by the middle of 2007. Because of such report the ARN decided to suspend the application of the requirement (i.e. it is not more mandatory, even for Atucha II). The present work presents the main aspects of that report. In particular, it explains the basis of the design requirement and the most important assumptions that triggered it. The differences between the assumptions made at that time and the reality of nuclear power generation at the beginning of the 21st Century, as well as their implications in relation to the requirement are described, including the Suess effect and its impact in the total dose due to C-14. Finally, after explaining in detail the facts that made no longer reasonable to keep in force the above mentioned requirement, the work presents the conclusions that lead the ARN to the suspension of this requirement. (author) [es

  4. Chromatographic Analysis of a Multicomponent Mixture of B1, B6, B12, Benfotiamine, and Diclofenac; Part I: HPLC and UPLC Methods for the Simultaneous Quantification of These Five Components in Tablets and Capsules.

    Science.gov (United States)

    Fayed, Ahmed Salah; Hegazy, Maha Abdel-Monem; Wahab, Nada Sayed Abdel

    2016-11-01

    New, simple, highly sensitive, precise, and accurate gradient reversed-phase chromatographic methods were developed using HPLC and ultra-HPLC (UPLC) systems for the determination of five components, namely thiamine, pyridoxine, cyanocobalamin, benfotiamine, and diclofenac in tablets and capsules. The methods were compared for their efficiency in the separation and determination of these five compounds using two different C18 columns (250 × 4.6 mm, 5 μm; and 100 × 4.6 mm, 2.6 μm) for HPLC and UPLC, respectively. Chromatographic separation was performed with a mobile phase containing acetonitrile and 0.025 M phosphate buffer (pH 3.5), with a gradient program and a flow rate of 1.5 and 1.0 mL/min for both methods, respectively. The methods were validated according to International Conference on Harmonization guidelines. Linearity was achieved in the range of 5.00 to 150.00 μg/mL for each of the five compounds. Ruggedness and intermediate precision were confirmed by different analysts on different columns on different days. Moreover, the components were subjected to an accelerated stability study under acidic, alkaline, and oxidative stress conditions and no interfering peaks were observed. The five compounds were efficiently separated in <20 min by HPLC, whereas for UPLC, separation was achieved in <8 min, which dramatically decreased the consumption of organic solvents.

  5. Implementation of a Marauding Insect Module (MIM, version 1.0) in the Integrated BIosphere Simulator (IBIS, version 2.6b4) dynamic vegetation-land surface model

    Science.gov (United States)

    Landry, Jean-Sébastien; Price, David T.; Ramankutty, Navin; Parrott, Lael; Damon Matthews, H.

    2016-04-01

    Insects defoliate and kill plants in many ecosystems worldwide. The consequences of these natural processes on terrestrial ecology and nutrient cycling are well established, and their potential climatic effects resulting from modified land-atmosphere exchanges of carbon, energy, and water are increasingly being recognized. We developed a Marauding Insect Module (MIM) to quantify, in the Integrated BIosphere Simulator (IBIS), the consequences of insect activity on biogeochemical and biogeophysical fluxes, also accounting for the effects of altered vegetation dynamics. MIM can simulate damage from three different insect functional types: (1) defoliators on broadleaf deciduous trees, (2) defoliators on needleleaf evergreen trees, and (3) bark beetles on needleleaf evergreen trees, with the resulting impacts being estimated by IBIS based on the new, insect-modified state of the vegetation. MIM further accounts for the physical presence and gradual fall of insect-killed dead standing trees. The design of MIM should facilitate the addition of other insect types besides the ones already included and could guide the development of similar modules for other process-based vegetation models. After describing IBIS-MIM, we illustrate the usefulness of the model by presenting results spanning daily to centennial timescales for vegetation dynamics and cycling of carbon, energy, and water in a simplified setting and for bark beetles only. More precisely, we simulated 100 % mortality events from the mountain pine beetle for three locations in western Canada. We then show that these simulated impacts agree with many previous studies based on field measurements, satellite data, or modelling. MIM and similar tools should therefore be of great value in assessing the wide array of impacts resulting from insect-induced plant damage in the Earth system.

  6. A note on neighborhood total domination in graphs

    Indian Academy of Sciences (India)

    [1] Arumugam S and Sivagnanam C, Neighborhood total domination in graphs, Opuscula. Mathematica 31 (2011) 519–531. [2] Chellali M and Haynes T W, A note on the total domination number of a tree, J. Combin. Math. Combin. Comput. 58 (2006) 189–193. [3] Haynes T W, Hedetniemi S T and Slater P J, Fundamentals ...

  7. Electoral and Partisan Cycles between US Economic Performance and Presidential Popularity

    NARCIS (Netherlands)

    W. Letterie (Wilko); O.H. Swank (Otto)

    1997-01-01

    textabstractIn this paper we discuss a recent paper by Stephen E Haynes in which he relates electoral cycles in political support to electoral cycles in economic variables Haynes finds that the cycle in support for Republican presidents is explained by the cycle in economic variables, whereas the

  8. Re-Os systematics and geochemistry of cobaltite (CoAsS) in the Idaho cobalt belt, Belt-Purcell Basin, USA: Evidence for middle Mesoproterozoic sediment-hosted Co-Cu sulfide mineralization with Grenvillian and Cretaceous remobilization

    Science.gov (United States)

    Saintilan, N.J.; Creaser, R.A.; Bookstrom, Arthur A.

    2017-01-01

    We report the first study of the Re-Os systematics of cobaltite (CoAsS) using disseminated grains and massive sulfides from samples of two breccia-type and two stratabound deposits in the Co-Cu-Au Idaho cobalt belt (ICB), Lemhi subbasin to the Belt-Purcell Basin, Idaho, USA. Using a 185Re + 190Os spike solution, magnetic and non-magnetic fractions of cobaltite mineral separates give reproducible Re-Os analytical data for aliquot sizes of 150 to 200 mg. Cobaltite from the ICB has highly radiogenic 187Os/188Os ratios (17–45) and high 187Re/188Os ratios (600–1800) but low Re and total Os contents (ca. 0.4–4 ppb and 14–64 ppt, respectively). Containing 30 to 74% radiogenic 187Os, cobaltite from the ICB is amenable to Re-Os age determination using the isochron regression approach.Re-Os data for disseminated cobaltite mineralization in a quartz-tourmaline breccia from the Haynes-Stellite deposit yield a Model 1 isochron age of 1349 ± 76 Ma (2σ, n = 4, mean squared weighted deviation MSWD = 2.1, initial 187Os/188Os ratio = 4.7 ± 2.2). This middle Mesoproterozoic age is preserved despite a possible metamorphic overprint or a pulse of metamorphic-hydrothermal remobilization of pre-existing cobaltite that formed along fold cleavages during the ca. 1190–1006 Ma Grenvillian orogeny. This phase of remobilization is tentatively identified by a Model 3 isochron age of 1132 ± 240 Ma (2σ, n = 7, MSWD = 9.3, initial 187Os/188Os ratio of 9.0 ± 2.9) for cobaltite in the quartz-tourmaline breccia from the Idaho zone in the Blackbird mine.All Mesoproterozoic cobaltite mineralization in the district was affected by greenschist- to lower amphibolite-facies (garnet zone) metamorphism during the Late Jurassic to Late Cretaceous Cordilleran orogeny. However, the fine- to coarse-grained massive cobaltite mineralization from the shear zone-hosted Chicago zone, Blackbird mine, is the only studied deposit that has severely disturbed Re

  9. RA Reactor operation and maintenance (I-IX), part VIII, Task 3.08/05, Decontamination of the reactor

    International Nuclear Information System (INIS)

    Zecevic, V.

    1963-12-01

    Permanent increase of radiation in the heavy water system was noticed during first three year of the RA reactor operation, even when the reactor was shutdown. It was found that there was no failure of the fuel element cladding. Radioactive cobalt was found in the heavy water which was rather strange. During repair of the heavy water system, it has been found that stellite was used for coating the heavy water pumps. Since stellite is a cobalt alloy, this could have been the source of radioactive cobalt in the heavy water. The stellite coating was damaged due to friction and particle of cobalt appeared in the coolant, they were activated since they were in the core. decontamination of the heavy water and the heavy water coolant loop was a must . Beside the detailed report on the contamination and decontamination of the heavy water system this volume includes 14 annexes describing the investigation of the event and the whole procedure of decontamination

  10. RA Reactor operation and maintenance (I-IX), part VIII, Task 3.08/05, Decontamination of the reactor; Pogon i odrzavanje reaktora (I-IX), VIII Deo, Zadatak 3.08/05 Dekontaminacija reaktora

    Energy Technology Data Exchange (ETDEWEB)

    Zecevic, V [Institute of Nuclear Sciences Boris Kidric, Reaktor RA, Vinca, Beograd (Serbia and Montenegro)

    1963-12-15

    Permanent increase of radiation in the heavy water system was noticed during first three year of the RA reactor operation, even when the reactor was shutdown. It was found that there was no failure of the fuel element cladding. Radioactive cobalt was found in the heavy water which was rather strange. During repair of the heavy water system, it has been found that stellite was used for coating the heavy water pumps. Since stellite is a cobalt alloy, this could have been the source of radioactive cobalt in the heavy water. The stellite coating was damaged due to friction and particle of cobalt appeared in the coolant, they were activated since they were in the core. decontamination of the heavy water and the heavy water coolant loop was a must . Beside the detailed report on the contamination and decontamination of the heavy water system this volume includes 14 annexes describing the investigation of the event and the whole procedure of decontamination.

  11. Decay heat and activity of the structural materials of the fuel and blanket assemblies of the second and third core of KNK II

    International Nuclear Information System (INIS)

    Winterhagen, D.

    1986-06-01

    The decay heat and activity caused by structural materials have been calculated for the fuel assemblies of KNK II (second and third core) with a residence time of 720 equivalent full-power days (efpd) and the blanket assemblies with 1880 efpd. The values are given for the different zones of the assemblies (head, active zone, fission gas plenum, foot and stellite area) for decay times from 1 to 20 years. For decay times beyond 2 years more than 80 % of the decay heat are caused by the Co60-decay, more than 60 % of which result from the stellite in the foot area [de

  12. Comparative metallurgical study of thick hard coatings without cobalt

    International Nuclear Information System (INIS)

    Clemendot, F.; Van Duysen, J.C.; Champredonde, J.

    1992-07-01

    Wear and corrosion of stellite type hard coatings for valves of the PWR primary system raise important problems of contamination. Substitution of these alloys by cobalt-free hard coatings (Colmonoy 4 and 4.26, Cenium 36) should allow to reduce this contamination. A comparative study (chemical, mechanical, thermal, metallurgical), as well as a corrosion study of these coatings were carried out. The results of this characterization show that none of the studied products has globally characteristics as good as those of grade 6 Stellite currently in service

  13. Effect of Heat Treatment on the Microstructure and Properties of HVOF-Sprayed Co-Cr-W Coating

    Czech Academy of Sciences Publication Activity Database

    Houdková, Š.; Smazalová, E.; Pala, Zdeněk

    2016-01-01

    Roč. 25, č. 3 (2016), s. 546-557 ISSN 1059-9630 Institutional support: RVO:61389021 Keywords : ASTM * G-65ASTM * Co-Cr-W * heat treatment * HVOF * Stellite 6 * wear Subject RIV: JK - Corrosion ; Surface Treatment of Materials Impact factor: 1.488, year: 2016

  14. Wear Test Results of Candidate Materials for the OK-542 Towed Array Handling Machine Level Winder

    Science.gov (United States)

    1994-12-29

    10 6. Wear Testing Photograph B ....................................................... .11 7. Clad Inconel 625 ...interfere with this wear test. Other materials that were tested included Inconel 625 , Titanium, 304 Stainless, 316 Stainless, and Ni-Al-Br. All of these...Stainless Steel, Inconel 625 , Nickel-Aluminum-Bronze, and Titanium. The specialty materials: Inconel 625 , Monel, Stainless and Stellite, were clad-welded

  15. Surface engineering with lasers : an application to Co-base materials

    NARCIS (Netherlands)

    de Hosson, J.T.M.; de Mol van Otterloo, J.L.; Boerstoel, B.M.; Huis in 't Veld, A.J.; Sarton, LAJ; Zeedijk, HB

    1997-01-01

    The present paper concentrates on the applications of CO2 laser treatments to enhance fretting wear properties of stainless steel. Stainless steel 316 is used as substrate material. Powder particles of the various stellites with sizes ranging between 45 and 125 mu m are fed onto the surface. It was

  16. Hemingway oli KGB, filmistaar Errol Flynn natside agent? / Tõnis Erilaid

    Index Scriptorium Estoniae

    Erilaid, Tõnis, 1943-

    2009-01-01

    John Earl Haynes, Harvey Klehr ja Alexander Vassiliev väidavad oma raamatus "Spies : The Rise and Fall of the KGB in America", et Ernest Hemingway oli 1940ndail aastail KGB ning Errol Flynn 1930ndatel aastatel natside agent

  17. Philosophical enquiry as a pedagogical tool to implement the CAPS ...

    African Journals Online (AJOL)

    Windows User

    2016-02-22

    Feb 22, 2016 ... A previous study suggested that pre-service teachers benefitted from exposure to this pedagogy. The aim ...... MA: Harvard University Press. Haynes J & Murris K ... resource book for teaching thinking (3rd ed). Alexandria, VA: ...

  18. Extracting Information Based on Partial or Complete Network Data

    African Journals Online (AJOL)

    pc

    2018-03-05

    Mar 5, 2018 ... depth and breadth first search network traversal do not perform well overall .... work was created using the Python's preferential attachment ..... [13] J. Boland, T. Haynes, and L. Lawson, “Domination from a distance,”. Congr.

  19. The Rise of Casual Work in Nigeria: Who Loses, Who Benefits?

    African Journals Online (AJOL)

    Toshiba

    India ( Jenkins, 2004) and Australia (Buchler, Haynes and Baxter,. 2009), showed that ... 2000 in an industry, out of which about 1500 may be casual workers. (Okafor ... Federal Bureau of statistics showed that Nigeria has a youth population of ...

  20. Bipolar Treatment: Are Bipolar I and Bipolar II Treated Differently?

    Science.gov (United States)

    ... The diagnosis and management of bipolar I and bipolar II disorders: Clinical practice update. Mayo Clinic Proceedings. 2017;92:1532. Haynes PL, et al. Social rhythm therapies for mood disorders: An update. Current Psychiatry Reports. ...

  1. Effect of Surface Impulsive Thermal Loads on Fatigue Behavior of Constant Volume Propulsion Engine Combustor Materials

    National Research Council Canada - National Science Library

    Zhu, Dongming

    2004-01-01

    .... In this study, a simulated engine test rig has been established to evaluate thermal fatigue behavior of a candidate engine combustor material, Haynes 188, under superimposed CO2 laser surface impulsive thermal loads (30 to 100 Hz...

  2. Identification of Two New Protective Pre-erythrocytic Malaria Vaccine Antigen Candidates

    Science.gov (United States)

    2011-01-01

    Anthony R, Grainger M, Haynes J, Moch J, Muster N, Sacci J, Tabb D, Witney A, Wolters D, Wu Y, Gardner M, Holder A, Sinden R, Yates J, Carucci D: A...proteomic view of the Plasmodium falciparum life cycle. Nature 2002, 419:520-526. 16. LeRoch D, Zhou Y, Blair P, Grainger M, Moch J, Haynes J, De La Vega P

  3. Cognitive Behavioral Social Rhythm Therapy (CBSRT) for Sleep and Mood Disturbances in Veterans with PTSD

    Science.gov (United States)

    2012-09-01

    Patricia.Haynes3@va.gov Fax: (520) 626-6050 E-mail: thaynes@email.arizona.edu Home Address: Citizenship : United States 2828 W. Calle...of the Ambivalent Sleeper [Board Review Question]. Journal of Clinical Sleep Medicine, 15, 511-512. Haynes, P. L. (2009). Is CBT-I effective for...Support Networks in Asymptomatic Individuals with a History of Depression Versus Never-Depressed Individuals. Personal Life Events: Birth of Child

  4. Design of new anti-Alzheimer drugs: ring-expansion synthesis and synchrotron X-ray diffraction study of dimethyl 4-ethyl-11-fluoro-1,4,5,6,7,8-hexahydroazonino[5,6-b]indole-2,3-dicarboxylate

    Directory of Open Access Journals (Sweden)

    Flavien A. A. Toze

    2018-03-01

    Full Text Available The title compound, C20H23FN2O4, is the product of a ring-expansion reaction from a seven-membered fluorinated hexahydroazepine to a nine-membered azonine. The nine-membered azonine ring of the molecule adopts a chair–boat conformation. The C=C and C—N bond lengths [1.366 (3 and 1.407 (3 Å, respectively] indicate the presence of conjugation within the enamine CH2—C=C—N—CH2 fragment. The substituent planes at the C=C double bond of this fragment are twisted by 16.0 (3° as a result of steric effects. The amine N(Et N atom has a trigonal–pyramidal configuration (sum of the bond angles = 346.3°. The interplanar angle between the two carboxylate substituents is 60.39 (8°. In the crystal, molecules form zigzag chains along [010] by intermolecular N—H...O hydrogen-bonding interactions, which are further packed in stacks toward [100]. The title azoninoindole might be considered as a candidate for the design of new Alzheimer drugs.

  5. New Search Strategies Successfully Optimize Retrieval of Clinically Sound Treatment Studies in EMBASE. A review of: Wong, Sharon S‐L, Nancy L. Wilczynski, and R. Brian Haynes. “Developing Optimal Search Strategies for Detecting Clinically Sound Treatment Studies in EMBASE.” Journal of the Medical Library Association 94.1 (Jan. 2006: 41‐47. 14 May 2007 http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=1324770.

    Directory of Open Access Journals (Sweden)

    John Loy

    2007-06-01

    Full Text Available Objective – To develop and test the sensitivity and specificity, precision andaccuracy of search strategies to retrieve clinically sound treatment studies in the EMBASE database.Design – Analytical study.Setting – Methodologically sound studies of treatment from 55 journals indexed in EMBASE for the year 2000.Subjects – EMBASE and hand searches performed at the Health Information Research Unit of McMaster University, Ontario, Canada.Methods – The authors compare the results of EMBASE searches using their search strategies with the “gold standard” of articles retrieved by hand search. Research assistants initially hand searched each issue of 55 selected journals published in 2000 to identify articles detailing studies on healthcare treatment of humans. Subject coverage of the journals was wide ranging and included obstetrics and gynaecology, psychiatry, oncology, neurology, surgery and general practice. Studies were then assessed to ensure they met the qualifying criteria: random allocation of participants to groups, outcome assessment of at least 80% of participants who began the study, and analysis consistent with study design. Initially, 3850 articles on treatment were identified, of which 1256 (32.6% were methodologically sound. To construct a comprehensive set of search terms, input was sought from librarians and researchers in the US and Canada. This initially produced a list of 5385 terms, of which 4843 were unique and 3524 produced hits. Individual search terms with sensitivity greater then 25% and specificity greater then 75% were incorporated into search strategies for use within the OVID interface for the EMBASE database to retrieve articles meeting the same criteria. These strategies were developed using all 27,769 articles published in the 55 journals in 2000. This all inclusive approach was used to test the search strategies’ ability to identify high quality treatment articles from a larger pool of material.Main results – The single term which achieved best sensitivity was “random:mp,”with a sensitivity of 95.1%. This same term achieved a high specificity of 92.5%. The best‐performing single term for specificity was “randomized:tw” at 96.7%, but this did reduce sensitivity to 63.2%. The single term to achieve the best balance between the two was “clinical trial:mp,” with a sensitivity of 88.3% and specificity of 88.0%. Combining terms produced varied results, and Table 3 within the article details terms used to give the best combinations for sensitivity, specificity and optimisation of both. The best three‐term search strategies for sensitivity achieved a rate just shy of 99% with a specificity of 72.0%, while the optimum three‐term strategy for specificity achieved 96.7% but with a trade off of lowering the rate of sensitivity to 51.7%. The best‐performing combination of search terms to optimise sensitivity and specificity produced values exceeding 92% for both.Conclusion – The authors present search strategies which can successfully be used to retrieve methodologically sound studies on the prevention and treatment of disease and health complications indexed on the EMBASE database. A clear outline of the trade‐off between sensitivity and specificity of the strategies is included.

  6. High-resolution hydro- and geo-stratigraphy at Atlantic Coastal Plain drillhole CR-622 (Strat 8)

    Science.gov (United States)

    Wrege, B.M.; Isely, J.J.

    2009-01-01

    We interpret borehole geophysical logs in conjunction with lithology developed from continuous core to produce high-resolution hydro- and geo-stratigraphic profiles for the drillhole CR-622 (Strat 8) in the Atlantic Coastal Plain of North Carolina. The resulting hydrologic and stratigraphic columns show a generalized relation between hydrologic and geologic units. Fresh-water aquifers encountered are the surficial, Yorktown, Pungo River and Castle Hayne. Geologic units present are of the middle and upper Tertiary and Quaternary periods, these are the Castle Hayne (Eocene), Pungo River (Miocene), Yorktown (Pliocene), James City and Flanner Beach (Pleistocene), and the topsoil (Holocene). The River Bend Formation (Oligocene) is missing as a distinct unit between the Pungo River Formation and the Castle Hayne Formation. The confining unit underlying the Yorktown Aquifer corresponds to the Yorktown Geologic Unit. The remaining hydrologic units and geologic units are hydrologically transitional and non-coincident. The lower Pungo River Formation serves as the confining unit for the Castle Hayne Aquifer, rather than the River Bend Aquifer, and separates the Pungo River Aquifer from the upper Castle Hayne Aquifer. All geologic formations were bound by unconformities. All aquifers were confined by the anticipated hydrologic units. We conclude that CR-622 (Strat 8) represents a normal sequence in the Atlantic Coastal Plain.

  7. Hard hardfacing by welding in the manufacture of valves; Problem Cobalt, alternatives, advantages, disadvantages

    International Nuclear Information System (INIS)

    Piquer Caballero, J.

    2014-01-01

    Alloys of recharge usually used in the field of the valves are base alloys cobalt (stellite), but in the field of nuclear power plants, due to radioactive activation of the cobalt, there is a growing trend to replace these alloys with other calls cobalt free . In this paper we will explore the most frequent and will be deducted the relevant advantages and disadvantages of these, in comparison with base alloys cobalt. (Author)

  8. Effect of tungsten-187 in primary coolant on dose rate build-up in Vandellos 2

    International Nuclear Information System (INIS)

    Fernandez Lillo, E.; Llovet, R.; Boronat, M.

    1994-01-01

    The present work proposes a relationship between the Cobalt-60 piping deposited activity and the relatively high levels of Tungsten-187 in the coolant of Vandellos 2. The conclusions of this work can be applicable to other plants, since it proposes a tool to estimate and quantify the contribution of stellite to the generation of Cobalt-60 and the radiation dose build-up. (authors). 7 figs., 6 refs

  9. Chromium Elimination and Cannon Life Extension for Gun Tubes

    Science.gov (United States)

    2012-08-30

    the use of hexavalent chromium (VI) in the production of cannon barrels by developing a cost effective environmentally friendly Explosive Bonding...erosion- resistant chrome cobalt alloy matrix with 15% tungsten. Stellite is used as M60 machine gun barrel liner. Tantalum Cobalt Tungsten...Grounds (YPG) Preliminary proof of principle endurance testing at YPG shows promising results when conducted side by side to a chrome plated

  10. Cost Estimate for Gun Liner Emplacement

    Science.gov (United States)

    2011-08-01

    excellent material to resist wear and erosion in gun tubes, it is applied by an electrolytic process that involves hexavalent chromium, a known carcinogen...A recent Department of Defense memorandum has strongly urged that, wherever possible, processes involving hexavalent chromium be eliminated from...might be affordable.) Other refractory metals, such as the Stellite series, BioDur CCM* (a cobalt, chrome , molybdenum alloy), or niobium are less

  11. Hard hardfacing by welding in the manufacture of valves; Problem Cobalt, alternatives, advantages, disadvantages; Recargues Duros por Soldadura en la Fabricacion de Valvulas ; el Problema del Cobalto, alternativas, ventajas, inconvenientes

    Energy Technology Data Exchange (ETDEWEB)

    Piquer Caballero, J.

    2014-07-01

    Alloys of recharge usually used in the field of the valves are base alloys cobalt (stellite), but in the field of nuclear power plants, due to radioactive activation of the cobalt, there is a growing trend to replace these alloys with other calls cobalt free . In this paper we will explore the most frequent and will be deducted the relevant advantages and disadvantages of these, in comparison with base alloys cobalt. (Author)

  12. Hard alloys testing-machine for values of PWR primary coolant circuits

    International Nuclear Information System (INIS)

    Campan, J.L.; Sauze, A.

    1980-01-01

    Testing of valve parts or material used in valve fabrication and particularly seizing conditions in friction of plane surfaces coated with hard alloys of the type stellite. The testing equipment called Marguerite is composed of a hot pressurized water loop in conditions similar to PWR primary coolant circuits (320 0 C, 150 bars) and a testing-machine with measuring instruments. Testing conditions and samples are described [fr

  13. Report on measurements at the pump Avala - Annex 7

    International Nuclear Information System (INIS)

    Nikolic, M.

    1963-01-01

    Visual inspection and measuring results have shown that the surface of the upper pump bearing is much more worn-out than the lower radial bearing. This has proved that most of the cobalt (contained in the stellite alloy) came from the upper pump bearings. It could be stated that about 60 grams of cobalt from the upper pump bearings could come into the coolant system [sr

  14. Electrospark deposition for die repair

    Directory of Open Access Journals (Sweden)

    J. Tušek

    2012-01-01

    Full Text Available The electrospark deposition is a process for surfacing of hard metal alloys, e.g. carbides and stellites, on the surfaces of new or old machine elements. In this process, a high current is conducted through an oscillating electrode and a substrate for a very short period of time. In the paper, the process is described and the thickness of deposited layer, chemical composition, dilution rate and the layer roughness are determined.

  15. Application of Moessbauer spectroscopy to study corrosion

    International Nuclear Information System (INIS)

    Ramshesh, V.; Ravichandran, K.; Venkateswarlu, K.S.

    1976-01-01

    The system components in a nuclear power station include steel, stainless steel and various alloys such as Monel, Inconel, Stellite etc. Usually water/heavy water used as the coolant flows at high temperatures and pressures. Under such conditions the interaction of system components with the coolant produces a host of corrosion products. The deposition of such products is essential. This report attempts to review the salient features of identification of such corrosion products using Moessbauer spectroscopy. (author)

  16. Analysis of structure-tectonic pattern within the 'Degelen' massif conformably to conditions of radionuclide migration in ground water

    International Nuclear Information System (INIS)

    Gorbunova, Eh.M.; Ivanchenko, G.N.; Godunova, L.D.

    2005-01-01

    Major orientation of radiation monitoring on the Semipalatinsk test site lies in direction of common regularities for formation and distribution of radioactive contamination. Zones, within the 'Degelen' technical area. of hydrogeological active faults are patly subjected to impact of underground explosions. Data of computer-aided decryption of a stellite image by means of program package LESSA allow specification of para-genesis structures standing as probabilistic pathways of radionuclide migration. (author)

  17. Prevention of crack initiation in valve bodies under thermal shock

    Energy Technology Data Exchange (ETDEWEB)

    Delmas, J.; Coppolani, P.

    1996-12-01

    On site and testing experience has shown that cracking in valves affects mainly the stellite hardfacing on seats and discs but may also be a concern for valve bodies. Metallurgical investigations conducted by EDF laboratories on many damaged valves have shown that most of the damage had either a chemical, manufacturing, or operating origin with a strong correlation between the origins and the type of damage. The chemical defects were either excess ferritic dilution of stellite or excess carburizing. Excess carburizing leads to a too brittle hardfacing which cracks under excessive stresses induced on the seating surfaces, via the stem, by too high operating thrusts. The same conditions can also induce cracks of the seats in the presence, in the hardfacing, of hidden defects generated during the welding process. Reduction of the number of defects results first from controls during manufacturing, mainly in the thickness of stellite. On the other hand, maintenance must be fitted to the type of defect. In-situ lapping may lead to release of cobalt, resulting in contamination of the circuit. Furthermore, it is ineffectual in the case of a crack through the seating surface, as is often found on globe valves. The use of new technologies of valves with removable seats and cobalt-free alloys solves permanently this kind of problem.

  18. Tribological study of hard coatings without cobalt intended to isolation components of PWR primary cooling system; Etude tribologique de revetements durs sans cobalt destines aux organes d`isolement du circuit primaire des REP

    Energy Technology Data Exchange (ETDEWEB)

    Cachon, L.

    1995-10-18

    The objective is to qualify coatings without cobalt to replace ``Stellites`` coatings in isolation valves of PWR primary cooling system, as Co is activated when passing in the reactor core and contaminated the cooling loop. Three families of coatings were tested: PVD thin films from 1 to 8 {mu}m monolayers of Cr/C{sub x} with x varying between 1.6 and 9.5 at% or multilayers of pure chromium and Cr/C{sub 1.6} at%, coatings with a thickness between 100 and 200 {mu}m of cermets NiCr{sub y} (y varying from 5 to 35 at%) matrix binding chromium or tungsten carbides, and thick coatings 2 mm thickness of cermets Nitronic 60 or Inconel 625 matrix binding 10, 20 or 30% titanium or niobium carbides. Stellite 6 (2 mm) is the reference coating for tribology. Coatings were qualified and selected by thermal shocks, corrosion and plane friction. The thin film and the thick families were disqualified by their destruction or by their high friction coefficient. Then coatings between 100 and 200 {mu}m were used in a valve mock-up working in PWR primary cooling system pressure and temperature conditions. Tests show that these coatings have better wear or tightness performances than stellite 6, except for a slightly higher friction coefficient. (A.B.).

  19. Mechanical characterization of superalloys for space reactors

    International Nuclear Information System (INIS)

    Duchesne, J.

    1989-01-01

    The aim of this work is the selection of structural materials that can be used in the temperature range 600-900 0 C for a gas cooled space reactor producing electricity. Superalloys fit best the temperature range required. Five nickel base alloys are chosen for their good mechanical behaviour: HAYNES 230, HASTELLOY S, HASTELLOY X, HASTELLOY XR and PYRAD 38D. Metallography, tensile and hardness tests are realized. Sample contraction is evidenced for some creep tests, under low stress: 20MPa at 800 0 C, on HAYNES 230 and HASTELLOY X, probably related to the structural evolution of these materials corresponding to a decrease of the crystal parameter [fr

  20. 6a-Nitro-6-(2,2,7,7-tetramethyltetrahydro-3aH-bis[1,3]dioxolo[4,5-b:4′,5′-d]pyran-5-yl-6a,6b,7,8,9,11a-hexahydro-6H-spiro[chromeno[3,4-a]pyrrolizine-11,11′-indeno[1,2-b]quinoxaline

    Directory of Open Access Journals (Sweden)

    T. Anuradha

    2014-01-01

    Full Text Available In the title compound, C39H38N4O8, the quinoxaline and indene subunits are essentially planar, with maximum deviations of 0.071 (2 and 0.009 (2 Å, respectively. The indenoquinoxaline system forms a dihedral angle of 72.81 (3° with the chromenopyrrolizine system. The two dioxolane rings, as well as the pyran ring of the chromeno group and the terminal pyrrolizine, each adopt an envelope conformation with O and C as flap atoms. The central pyrrolizine ring adopts a twisted conformation. Intramolecular C—H...O and C—H...N hydrogen bonds occur. The crystal structure exhibits C—H...O hydrogen bonds, and is further stablized by C—H...π interactions, forming a two-dimensional network along the bc plane.

  1. Huntidega Kanadasse lumme müttama

    Index Scriptorium Estoniae

    2007-01-01

    Whitbread'i kirjanduspreemia vahetas alanud aastal sponsorit. Kuulutati välja Costa kirjandusauhinna võitjad viies kategoorias. Debüütromaani auhinna võitis Stef Penney romaaniga "The tenderness of wolves". Romaani auhind läks William Boydile, elulooauhind Brian Thompson'ile, luuleauhind John Haynes'ile, auhind parima lasteraamatu eest Linda Newbery'le

  2. Exploring the Relationships among Race, Class, Gender, and Middle School Students' Perceptions of School Racial Climate

    Science.gov (United States)

    Watkins, Natasha D.; Aber, Mark S.

    2009-01-01

    Although school climate has been thought to be especially important for racial minority and poor students (Booker, 2006; Haynes, Emmons, & Ben-Avie, 1997), little research has explored the significance of racial climate for these students. Furthermore, research in the area has tended to treat race, socioeconomic class, and gender separately,…

  3. Parents' and Teachers' Perceptions of Effective Communication in Two Schools in One Division in Virginia

    Science.gov (United States)

    Lipscomb, Kecia O.

    2015-01-01

    Parents often perceive schools as the sole educator of their child when in actuality the school prefers parents to be involved as partners in the learning process (Comer & Haynes, 1991). Likewise, schools make the assumption that parents realize their role in the learning process, but do not effectively communicate the partnership to parents,…

  4. Sprout selection and performance of goats fed Acacia karroo ...

    African Journals Online (AJOL)

    Mr Casper Nyamukanza

    Goats are important browsers in the Eastern Cape Province, which keeps ... Acacia karroo Hayne (Fabaceae = Leguminosae) trees are abundant and able to ... savanna and consists of subtropical thicket vegetation dominated by deciduous woody shrubs shorter than ..... National Academy Press, Washington, D.C., USA.

  5. The Magic Shrinking Machine Revisited: The Presence of Props at Recall Facilitates Memory in 3-Year-Olds

    Science.gov (United States)

    Dahl, Jonna J.; Kingo, Osman S.; Krøjgaard, Peter

    2015-01-01

    In a seminal study Simcock and Hayne (2002) showed that 3-year-olds were unable to use newly acquired words to describe a "magic" event experienced 6 or 12 months earlier. In the reference study the children's verbal recall was tested without props being present. Inspired by recent evidence, the original design was replicated, testing…

  6. Pilot-plant testing of materials proposed for use as NWCF feed and fuel nozzle caps

    International Nuclear Information System (INIS)

    Birrer, S.A.

    1980-12-01

    Results of a series of tests performed on materials proposed for use at New Waste Calcining Facility (NWCF) fuel and feed nozzle caps are described. Results show that Haynes Alloys 25 and 188 and Inconel Alloys 617, 625, and 690 have acceptable corrosion and erosion rates based upon the high-temperature oxidation, erosion, and corrosion tests conducted

  7. A Wind-Forced Modeling Study of the Canary Current System from 30 Degrees N to 42.5 Degrees N

    Science.gov (United States)

    1998-06-01

    and Haynes and Barton (1990), using high resolution infra-red images from NOAA7 and NOAA9 and numerous in- situ measurements, reveal the existence of...dinamica das Aguas costeiras de Portugal. Dissertacao apresentada a Universidade de Lisboa para obtencao do grau de Doutor em Fisica, especializacao

  8. Complement and Antibody-Mediated Enhancement of Erythrocyte Invasion by Plasmodium Falciparum

    Science.gov (United States)

    2016-04-01

    Haynes, J.D., Moch , J.K., Smoot, D.S., 2002. Erythrocytic malaria growth or invasion inhibi- tion assays with emphasis on suspension culture GIA... Moch , J.K., Finberg, R.W., Tsokos, G.C., Stoute, J.A., 2010. Complement receptor 1 is a sialic acid-independent erythrocyte receptor of Plasmodium

  9. Utilisation de la Technique D\\'électrophorèse des Protéines Totales ...

    African Journals Online (AJOL)

    Utilisation de la Technique D\\'électrophorèse des Protéines Totales sur Gel de Polyacrylamide-SDS (SDS-PAGE) pour L\\'étude de la Diversité des Rhizobiums D\\'Acacia tortilis (Forsk.) Hayne Subsp. Raddiana (Savi) Brenan.

  10. The Florida Prostate Cancer Research Training Opportunities for Outstanding Leaders (ReTOOL (registered trademark)) Program: Creating Opportunities for Minority HBCU Students

    Science.gov (United States)

    2013-03-01

    underserved. (MA Haynes & BD Smedley (Eds). National Academy Press, Washington DC. 2. Norris KC, Agodoa LY (2005). The need for health professionals... Robert Vessella, PhD University of Washington Medical Center 44 10:30 – 10:45 am S-10 A Targeted Approach to Prostate Radiotherapy Alan

  11. Building a Unit-Level Mentored Program to Sustain a Culture of Inquiry for Evidence-Based Practice

    Science.gov (United States)

    2015-03-24

    Melnyk and Eileen Fineout-Overholt, who graciously and consistently support military nursing science. Building a Unit-Level Mentored Program...Rosenberg W, Gray JA, Haynes RB, Richardson WS. Evidence based medicine: What it is and what it isn’t. BMJ. 1996;312(7023):71-72.doi: http

  12. What about Social Value?

    Science.gov (United States)

    Beauvois, Jean-Leon; Depret, Eric

    2008-01-01

    We focus on three aspects of the articles of Reyna, of Perry, Stupnisky, Daniels and Haynes, and of Murdock, Beauchamp and Hinton. The first aspect is the logic of causal chain, a logic that we differentiate from a more deterministic approach. The second one is the mode of corrective action (attribution retraining) that is planned for students,…

  13. VizieR Online Data Catalog: HI-bearing ultra-diffuse ALFALFA galaxies (Leisman+, 2017)

    Science.gov (United States)

    Leisman, L.; Haynes, M. P.; Janowiecki, S.; Hallenbeck, G.; Jozsa, G.; Giovanelli, R.; Adams, E. A. K.; Neira, D. B.; Cannon, J. M.; Janesh, W. F.; Rhode, K. L.; Salzer, J. J.

    2018-02-01

    All sources discussed here have available SDSS and ALFALFA data. The ALFALFA observations, data reduction, and catalog products are detailed elsewhere (e.g., Giovanelli+ 2005AJ....130.2598G ; Saintonge 2007AJ....133.2087S ; Haynes+ 2011, J/AJ/142/170). (1 data file).

  14. Kuus näitlejat, üks Bob Dylan / Jaanus Noormets

    Index Scriptorium Estoniae

    Noormets, Jaanus

    2008-01-01

    Todd Haynes'i mängufilm muusik Bob Dylanist "Kus on Bob Dylan?" ("I'm Not There") : laulja alter ego kehastavad Ben Whishaw, Christian Bale, Heath Ledger, Cate Blanchett, Richard Gere, Marcus Carl Franklin : Ameerika Ühendriigid 2007

  15. Kus ta siis ometi on - see Bob Dylan? / Immo Mihkelson

    Index Scriptorium Estoniae

    Mihkelson, Immo, 1959-

    2008-01-01

    Todd Haynes'i mängufilm muusik Bob Dylanist "Kus on Bob Dylan?" ("I'm Not There") : laulja alter ego kehastavad Ben Whishaw, Christian Bale, Heath Ledger, Cate Blanchett, Richard Gere, Marcus Carl Franklin : Ameerika Ühendriigid 2007. 4. juunil Saku Suurhallis toimuvast kontserdist. Jaak Johanson, Tõnis Mägi, Riho Sibul, Hannes Varblane ameerika lauljast

  16. 33 CFR 117.829 - Northeast Cape Fear River.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Northeast Cape Fear River. 117... BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements North Carolina § 117.829 Northeast Cape... the Seaboard System Railroad Bridge across the Northeast Cape Fear River, mile 27.0, at Castle Hayne...

  17. Quenching of Emission and of Photochemistry for Aqueous Rh(NH3)5Cl(2+).

    Science.gov (United States)

    1979-04-01

    Hueneme, CalifornIa 93041 Attn: Dr. R. 3. Marcus 1 Attn: Mr. W. S. Haynes ONR Branch Offi ce Professor 0. Hein7 760 Market Street , Rm. 447...Peebles 1 WashI ngton, D.C. 20380 Directo r, Naval Research Laboratory Offi ce of Naval Researc hWashington, D.C. 20390 Arlington, VIrginia 22217

  18. Heidegger and Leibniz: Reason and Faith

    African Journals Online (AJOL)

    denise

    Heidegger and Leibniz: Reason and Faith. Renato Cristin (1998). Heidegger and Leibniz: Reason and Faith. Dordrecht: Kluwer Academic Publishers. Hard Cover (130 pages + index) by Felicity Haynes. Cristin sets out to analyze. Heidegger's treatment and use of Leibniz, and in so doing presents a view of. Leibniz which ...

  19. 2068-IJBCS-Article-Saidou Ousseina

    African Journals Online (AJOL)

    hp

    que Schoenefeldia gracilis Kunth., Aristida mutabilis Trin. et Rupr., Dactyloctenium aegyptiaca (L.) Willd., Tribulus terrestris L. (Ousseina, 2012) parsemée de plantes ligneuses (Maerua crassifolia. Forsk.,. Balanites aegyptiaca (L.) Del., Acacia senegal (L.) Willd., Acacia tortilis (Forssk.) Hayne subsp. raddiana (Savi) Brenan,.

  20. Social Networks in the workplace - some data protection issues

    OpenAIRE

    Haynes, D.

    2011-01-01

    There are many benefits to be gained from using social networks in the workplace but there is a downside – a growing concern about privacy and misuse of personal information. Using the results from a survey he conducted to highlight the issues, David Haynes puts forward an approach to managing social networks through the introduction of organisational policy.

  1. Contribution to the replacement of cobalt-free hardfacing coating by laser cladding in fast neutron reactors

    International Nuclear Information System (INIS)

    De-Tran, Van

    2014-01-01

    This thesis contributes to the replacement of the coating of Stellite 6 which is used in friction areas for the primary circuit of the fast neutron reactor. It contains three parts: 1) A literature review for selecting the materials and the deposition process 2) A parametric study to get healthy deposits (good adhesion with the substrate, little porosity, no cracks, low dilution) 3) A study wear behavior of deposits obtained, at high temperature (200 C) under an atmosphere inert gas, to determine the wear resistance of materials selected without the influence of an eventual oxidation layer. From the literature review, it appears the following choices implemented in our study: * the method laser cladding with advantages such as: - Good adhesion (metallurgical) - High cooling speed - Low dilution rate - Wide parametric range * two nickel-based alloys: Colmonoy-52 and Tribaloy-700. These alloys have good dry wear behavior and could be deposited by the laser. In the manufacturing part of the healthy deposit, firstly, we characterized the metal powder. Then, a parametric study was performed to look for a good parametric range that makes us getting a healthy deposit of Stellite 6 (reference) of Colmonoy-52 and Tribaloy-700. In this case, relationships among three main process parameters laser cladding (laser beam power, surface scanning speed, rate of powder) with the microstructure and chemical composition of the deposit are studied. In study the wear behavior, a pin-on-disc type of tribological was used and tests were carried out in argon at room temperature and 200 C. We investigated the wear mechanism of the best deposition of Stellite 6, Colmonoy-52 and Tribaloy-700. The wear resistance of these materials were thoroughly compared. (author) [fr

  2. Aspects of a Co-free hardfacing Materials Development to Reduce the Radioactivity in NPPs

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Joung Soo; Kim, Hong Pyo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Suh, Jeong Hun [Inss Tek Co., Daejeon (Korea, Republic of)

    2007-07-01

    For the last one or two decades, active researches to develop Co-free hardfacing materials in order to replace Co-base stellite alloys have been done to reduce the radioactivity in the primary systems in nuclear power plants(NPPs). However, Co-free materials having superior mechanical properties to stellite alloys have not been developed up to now. There are two ways to increase the performance characteristics of the key parts needed to be coated with hardfacing materials, thus resulting in replacing the Co-base stellite alloys with superior mechanical properties; one of them is to develop new Co-free materials with a better quality in performance than that of satellite alloys. The other is to use new coating techniques developed to increase the coated surface properties of already developed Co-free materials. In this study, the aspect of newly developed Co-free materials is reviewed and the necessity of the development of new Co-free materials is emphasized for the replacement of Co-base satellite alloys. In addition, a new coating technique, which is called a laser hardfacing(cladding) technique(LHT), is introduced and its advantage and applicability to the key parts in NPPs are discussed using our experimental results to improve the properties of a surface coated with existing Co-free hardfacing materials. The coating technique using a laser beam having a high energy density has unique advantages to obtain various microstructures such as crystalline, amorphous, porous, and nano structures and also to get coating layers having high a hardness to result in an excellent resistance to erosion corrosion and wear.

  3. 75 FR 6220 - Information Collection Requirements for the Variance Regulations; Submission for Office of...

    Science.gov (United States)

    2010-02-08

    ... contained in Sections 6(b)6(A), 6(b)6(B), 6(b)6(C), 6(d), and 16 of the Occupational Safety and Health Act... Occupational Safety and Health Act of 1970 (OSH Act; 29 U.S.C. 651 et seq.) authorizes information collection...), 6(b)6(B), 6(b)6(C), 6(d), and 16 of the Occupational Safety and Health Act of 1970, and 29 CFR 1905...

  4. Deposição por plasma com arco transferido Hardfacing by plasma transfer arc process

    Directory of Open Access Journals (Sweden)

    Víctor Vergara Díaz

    2010-03-01

    Full Text Available Em virtude do Processo de Soldagem Plasma com Alimentação de Pó ter similaridades com o Processo de Soldagem Plasma com Alimentação de Arame, foi realizado um estudo comparativo entre ambos os processos utilizando-se a liga a base de cobalto comercialmente conhecida como Stellite 6, como material de adição na forma de pó e arame. A pesquisa foi realizada com a expectativa de ser aplicada nas operações de revestimentos de superfícies, em especial em pás de turbinas hidráulicas desgastadas por cavitação. A seleção do material de adição a ser empregado depende da natureza do mecanismo de desgaste encontrado. No Labsolda, a liga Stellite 6 vem sendo uma das mais utilizadas, por apresentar uma excelente resistência ao desgaste erosivo por cavitação. Foi avaliada a influência da vazão de gás de plasma a partir dos valores de diluição, dimensões do cordão, dureza e microestrutura. O Processo de Soldagem Plasma com Alimentação de Pó foi o que produziu o melhor acabamento superficial, menor diluição, melhor molhamento e maior largura. Com isto abre-se uma nova perspectiva para revestimentos metálicos e neste contexto se insere a recuperação por soldagem de partes erodidas de turbinas hidráulicas.The Plasma powder transferred arc welding process, which uses feed stock in the powder form, has similarities with Plasma wire transferred arc welding. This work describes a comparative study of the two processes using a Cobalt-based alloy commercially known as Stellite 6. This Co-based alloy is recognized for its superior cavitation erosion resistance. The aim of this work is to investigate the potential of PTA coatings for the protection and refurbishiment hydraulic turbine blades. Coatings were evaluated for the influence of Plasma gas flow rate on coating dilution, geometry, hardness and microstructure. Coatings processed with the atomized Stellite 6 powder feestock showed a superior surface quality, lower dilution

  5. Friction and wear of ball bearings in liquid sodium environment. Pt. 1

    International Nuclear Information System (INIS)

    Kleefeldt, K.; Gering, G.

    1975-07-01

    This report describes sodium experiments with ball bearings, fabricated out of five different materials, i.e. tool steel (s-6-5-2), stainless high speed steel (BG 42), stellite, ferro-titanit (WF 13.5) and tungsten carbide/cobalt cermet (GT 10/20). With each material four cageless bearings of the type 6207 were tested in task 1 under the following test conditions, in order to determine the most promising material for further investigations: test temperature 400 0 C, axial load 300 kp, speed 200 min -1 , total revolutions 0.2 x 10 6 , oxygen concentration [de

  6. Residual stress and crack initiation in laser clad composite layer with Co-based alloy and WC + NiCr

    International Nuclear Information System (INIS)

    Lee, Changmin; Park, Hyungkwon; Yoo, Jaehong; Lee, Changhee; Woo, WanChuck; Park, Sunhong

    2015-01-01

    Highlights: • Major problem, clad cracking in laser cladding process, was researched. • Residual stress measurements were performed quantitatively by neutron diffraction method along the surface of specimens. • Relationship between the residual stress and crack initiation was showed clearly. • Ceramic particle effect in the metal matrix was showed from the results of residual stress measurements. • Initiation sites of generating clad cracks were specifically studied in MMC coatings. - Abstract: Although laser cladding process has been widely used to improve the wear and corrosion resistance, there are unwanted cracking issues during and/or after laser cladding. This study investigates the tendency of Co-based WC + NiCr composite layers to cracking during the laser cladding process. Residual stress distributions of the specimen are measured using neutron diffraction and elucidate the correlation between the residual stress and the cracking in three types of cylindrical specimens; (i) no cladding substrate only, (ii) cladding with 100% stellite#6, and (iii) cladding with 55% stellite#6 and 45% technolase40s. The microstructure of the clad layer was composed of Co-based dendrite and brittle eutectic phases at the dendritic boundaries. And WC particles were distributed on the matrix forming intermediate composition region by partial melting of the surface of particles. The overlaid specimen exhibited tensile residual stress, which was accumulated through the beads due to contraction of the coating layer generated by rapid solidification, while the non-clad specimen showed compressive. Also, the specimen overlaid with 55 wt% stellite#6 and 45 wt% technolase40s showed a tensile stress higher than the specimen overlaid with 100% stellite#6 possibly, due to the difference between thermal expansion coefficients of the matrix and WC particles. Such tensile stresses can be potential driving force to provide an easy crack path ways for large brittle fractures

  7. Residual stress and crack initiation in laser clad composite layer with Co-based alloy and WC + NiCr

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Changmin; Park, Hyungkwon; Yoo, Jaehong [Division of Materials Science and Engineering, Hanyang University, Seoul 133-791 (Korea, Republic of); Lee, Changhee, E-mail: chlee@hanyang.ac.kr [Division of Materials Science and Engineering, Hanyang University, Seoul 133-791 (Korea, Republic of); Woo, WanChuck [Neutron Science Division, Korea Atomic Energy Research Institute, Daejeon 305-353 (Korea, Republic of); Park, Sunhong [Research Institute of Industrial Science & Technology, Hyo-ja-dong, Po-Hang, Kyoung-buk, San 32 (Korea, Republic of)

    2015-08-01

    Highlights: • Major problem, clad cracking in laser cladding process, was researched. • Residual stress measurements were performed quantitatively by neutron diffraction method along the surface of specimens. • Relationship between the residual stress and crack initiation was showed clearly. • Ceramic particle effect in the metal matrix was showed from the results of residual stress measurements. • Initiation sites of generating clad cracks were specifically studied in MMC coatings. - Abstract: Although laser cladding process has been widely used to improve the wear and corrosion resistance, there are unwanted cracking issues during and/or after laser cladding. This study investigates the tendency of Co-based WC + NiCr composite layers to cracking during the laser cladding process. Residual stress distributions of the specimen are measured using neutron diffraction and elucidate the correlation between the residual stress and the cracking in three types of cylindrical specimens; (i) no cladding substrate only, (ii) cladding with 100% stellite#6, and (iii) cladding with 55% stellite#6 and 45% technolase40s. The microstructure of the clad layer was composed of Co-based dendrite and brittle eutectic phases at the dendritic boundaries. And WC particles were distributed on the matrix forming intermediate composition region by partial melting of the surface of particles. The overlaid specimen exhibited tensile residual stress, which was accumulated through the beads due to contraction of the coating layer generated by rapid solidification, while the non-clad specimen showed compressive. Also, the specimen overlaid with 55 wt% stellite#6 and 45 wt% technolase40s showed a tensile stress higher than the specimen overlaid with 100% stellite#6 possibly, due to the difference between thermal expansion coefficients of the matrix and WC particles. Such tensile stresses can be potential driving force to provide an easy crack path ways for large brittle fractures

  8. Study on Co-free amorphous material cladding using a laser beam to improve the resistance of primary system parts in NPPs to wear/erosion-corrosion

    International Nuclear Information System (INIS)

    Kim, J. S.; Woo, S. S.; Seo, J. H.

    2001-01-01

    A study on Co-free amorphous material, ARMACOR M, cladding using a laser beam has been performed to improve resistance of the primary system main parts on nuclear power plants to wear/erosion-corrosion. The wear/erosion-corrosion properties of ARMACRO M cladded speciemens were characterized in air at room temperature and 300 .deg. C and in air at room temperature, and compared to those of other hardfacing materials, such as Stellite 6, NOREM 02, Deloro 50, TIG-welde or laer cladded. According to the results, ARMACOR M laser-cladded specimen showed to have the highest resistance to wear/erosion-corrosion

  9. RA Reactor operation and maintenance (I-IX), part V, Task 3.08/04-06, Refurbishment of the heavy water pumps

    International Nuclear Information System (INIS)

    Zecevic, V.; Nikolic, M.; Milic, J.

    1963-12-01

    In addition to detailed instructions for maintenance and repair of the heavy water pumps at the RA reactor this document includes nine annexes. They are as follows: cleaning the heavy water pump Avala with distilled water; instructions for repair of the pump CEN-132 (two annexes); list of operating characteristics of the pumps before repair; conclusions of the experts concerning the worn out bearings of the heavy water pump Avala, with the analysis of the stellite layer; report on the completed repair actions on the pumps Avala and CEN-132; report on the measurements done on the pump Avala; and the certificate concerning inspection of the pump

  10. RA Reactor operation and maintenance (I-IX), part V, Task 3.08/04-06, Refurbishment of the heavy water pumps; Pogon i odrzavanje reaktora RA (I-IX), V Deo, Zadatak 3.08/04-06 Remont teskovodnih pumpi

    Energy Technology Data Exchange (ETDEWEB)

    Zecevic, V; Nikolic, M; Milic, J [Institute of Nuclear Sciences Boris Kidric, Reaktor RA, Vinca, Beograd (Serbia and Montenegro)

    1963-12-15

    In addition to detailed instructions for maintenance and repair of the heavy water pumps at the RA reactor this document includes nine annexes. They are as follows: cleaning the heavy water pump Avala with distilled water; instructions for repair of the pump CEN-132 (two annexes); list of operating characteristics of the pumps before repair; conclusions of the experts concerning the worn out bearings of the heavy water pump Avala, with the analysis of the stellite layer; report on the completed repair actions on the pumps Avala and CEN-132; report on the measurements done on the pump Avala; and the certificate concerning inspection of the pump.

  11. Physical properties and microstructure performance of ultrafine nanocrystals reinforced laser 3D print microlaminates

    International Nuclear Information System (INIS)

    Li, Jianing; Xia, Chunzhi; Liu, Peng; Pan, Guanghui; Wang, Congwei

    2015-01-01

    Highlights: • Ultrafine nanocrystals, nanorods and amorphous phases were produced in such LRP microlaminates. • The amorphous/nanocrystalline interface owned a high bonding energy. • Amorphous/nanocrystalline interface may retard growth of nanocrystals in a certain extent. • Due to production of amorphous, lots of microscale ASNPs were produced. • Ultrafine nanocrystals had the high interface energy, which became the driving force of the atomic motions. - Abstract: Rapid prototyping based on laser alloying was used to produce ultrafine nanocrystals (UN) reinforced three-dimensional microlaminates. Such microlaminates were fabricated on a TA1 alloy by laser rapid prototyping (LRP) of Stellite 20–TiN–B 4 C mixed powders to produce a bottom layer; then Stellite 20–TiN–B 4 C–Sb powders were deposited on such bottom-layer in order to form an upper-layer. There is an excellent metallurgical combination between such two layer; the upper-layer shows a better wear resistance than that of the bottom layer. The Sb addition promoted lots of UN to be produced, and lots of the nanorods were also produced in such microlaminates, their growth was retarded by agglomeration of UN in a certain extent. Such UN had the high interface energy, which became the driving force of atomic motions, favoring formation of a compact fine structure

  12. High power CO2 lasers and their applications in nuclear industry

    International Nuclear Information System (INIS)

    Nath, A.K.

    2002-01-01

    Carbon dioxide laser is one of the most popular lasers in industry for material processing applications. It has very high power capability and high efficiency, can be operated in continuous wave (CW), modulated and pulsed modes, and has relatively low cost. Due to these characteristics high power CO 2 lasers are being used worldwide in different industries for a wide variety of materials processing operations. In nuclear industry, CO 2 laser has made its way in many applications. Some of the tasks performed by multikilowatt CO 2 laser are cutting operations necessary to remove unprocessible hardware from reactor fuel assemblies, sealing/fixing/removing radioactive contaminations onto/from concrete surfaces and surface modification of engineering components for improved surface mechanical and metallurgical characteristics. We have developed various models of CW CO 2 lasers of power up to 12 kW and a high repetitive rate TEA (Transversely Excited Atmospheric pressure) CO 2 laser of 500 W average power operating at 500 Hz repetition rates. We have carried many materials processing applications of direct relevance to DAE. Recent work includes laser welding of end plug PFBR fuel tubes, martensitic stainless steel and titanium alloy, surface cladding of turbine blades made of Ni-super alloy with stellite 694, fabrication on graded material of stainless steel and stellite, and laser scabbling, drilling and cutting of concrete which have potential application in decontamination and decommissioning of nuclear facilities. A brief overview of these indigenous developments will be presented. (author)

  13. Modeling the Influence of Process Parameters and Additional Heat Sources on Residual Stresses in Laser Cladding

    Science.gov (United States)

    Brückner, F.; Lepski, D.; Beyer, E.

    2007-09-01

    In laser cladding thermal contraction of the initially liquid coating during cooling causes residual stresses and possibly cracks. Preweld or postweld heating using inductors can reduce the thermal strain difference between coating and substrate and thus reduce the resulting stress. The aim of this work is to better understand the influence of various thermometallurgical and mechanical phenomena on stress evolution and to optimize the induction-assisted laser cladding process to get crack-free coatings of hard materials at high feed rates. First, an analytical one-dimensional model is used to visualize the most important features of stress evolution for a Stellite coating on a steel substrate. For more accurate studies, laser cladding is simulated including the powder-beam interaction, the powder catchment by the melt pool, and the self-consistent calculation of temperature field and bead shape. A three-dimensional finite element model and the required equivalent heat sources are derived from the results and used for the transient thermomechanical analysis, taking into account phase transformations and the elastic-plastic material behavior with strain hardening. Results are presented for the influence of process parameters such as feed rate, heat input, and inductor size on the residual stresses at a single bead of Stellite coatings on steel.

  14. Physical properties and microstructure performance of ultrafine nanocrystals reinforced laser 3D print microlaminates

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jianing, E-mail: jn2369@163.com [School of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 (China); Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024 (China); Xia, Chunzhi [Provincial Laboratory of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang 212003 (China); Liu, Peng; Pan, Guanghui; Wang, Congwei [School of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 (China)

    2015-10-05

    Highlights: • Ultrafine nanocrystals, nanorods and amorphous phases were produced in such LRP microlaminates. • The amorphous/nanocrystalline interface owned a high bonding energy. • Amorphous/nanocrystalline interface may retard growth of nanocrystals in a certain extent. • Due to production of amorphous, lots of microscale ASNPs were produced. • Ultrafine nanocrystals had the high interface energy, which became the driving force of the atomic motions. - Abstract: Rapid prototyping based on laser alloying was used to produce ultrafine nanocrystals (UN) reinforced three-dimensional microlaminates. Such microlaminates were fabricated on a TA1 alloy by laser rapid prototyping (LRP) of Stellite 20–TiN–B{sub 4}C mixed powders to produce a bottom layer; then Stellite 20–TiN–B{sub 4}C–Sb powders were deposited on such bottom-layer in order to form an upper-layer. There is an excellent metallurgical combination between such two layer; the upper-layer shows a better wear resistance than that of the bottom layer. The Sb addition promoted lots of UN to be produced, and lots of the nanorods were also produced in such microlaminates, their growth was retarded by agglomeration of UN in a certain extent. Such UN had the high interface energy, which became the driving force of atomic motions, favoring formation of a compact fine structure.

  15. APPLICATION OF QC TOOLS FOR CONTINUOUS IMPROVEMENT IN AN EXPENSIVE SEAT HARDFACING PROCESS USING TIG WELDING

    Directory of Open Access Journals (Sweden)

    Mohammed Yunus

    2016-09-01

    Full Text Available The present study is carried out to improve quality level by identifying the prime reasons of the quality related problems in the seat hardfacing process involving the deposition of cobalt based super alloy in I.C. Engine valves using TIG welding process. During the Process, defects like stellite deposition overflow, head melt, non-uniform stellite merging, etc., are observed and combining all these defects, the rejection level was in top position in Forge shop. We use widely referred QC tools of the manufacturing field to monitor the complete operation and continuous progressive process improvement to ensure ability and efficiency of quality management system of any firm. The work aims to identify the various causes for the rejection by the detailed study of the operation, equipment, materials and the various process parameters that are very important to get defects-free products. Also, to evolve suitable countermeasures for reducing the rejection percentage using seven QC tools. To further understand and validate the obtained results, we need to address other studies related to motivations, advantages, and disadvantages of applying quality control tools.

  16. Replacement of Co-base alloy for radiation exposure reduction in the primary system of PWR

    International Nuclear Information System (INIS)

    Han, Jeong Ho; Nyo, Kye Ho; Lee, Deok Hyun; Lim, Deok Jae; Ahn, Jin Keun; Kim, Sun Jin

    1996-01-01

    Of numerous Co-free alloys developed to replace Co-base stellite used in valve hardfacing material, two iron-base alloys of Armacor M and Tristelle 5183 and one nickel-base alloy of Nucalloy 488 were selected as candidate Co-free alloys, and Stellite 6 was also selected as a standard hardfacing material. These four alloys were welded on 316SS substrate using TIG welding method. The first corrosion test loop of KAERI simulating the water chemistry and operation condition of the primary system of PWR was designed and fabricated. Corrosion behaviors of the above four kinds of alloys were evaluated using this test loop under the condition of 300 deg C, 1500 psi. Microstructures of weldment of these alloys were observed to identify both matrix and secondary phase in each weldment. Hardnesses of weld deposit layer including HAZ and substrate were measured using micro-Vickers hardness tester. The status on the technology of Co-base alloy replacement in valve components was reviewed with respect to the classification of valves to be replaced, the development of Co-free alloys, the application of Co-free alloys and its experiences in foreign NPPs, and the Co reduction program in domestic NPPs and industries. 18 tabs., 20 figs., 22 refs. (Author)

  17. Laser stereolithography by multilayer cladding of metal powders

    Science.gov (United States)

    Jendrzejewski, Rafal; Rabczuk, Grazyna T.; Zaremba, R.; Sliwinski, Gerard

    1998-07-01

    3D-structures obtained by means of laser cladding of the metal alloy powders: bronze B10 and stellite 6 and the process parameters are studied experimentally. The structures are made trace-on-trace by remelting of the metal powder injected into the focusing region of the 1.2 kW CO2 laser beam. For the powder and sample feeding rates of 8-22 g/min and 0.4-1.2 m/min, respectively, and the applied beam intensities not exceeding 2 X 105 W cm-2 the process is stable and regular traces connected via fusion zones are produced for each material. The thickness of these zones does not exceed several per cent of the layer height. The process results in the efficient formation of multilayer structures. From their geometry the effect of energy coupling and interaction parameters are deduced. Moreover, the microanalysis by means of SEM- and optical photographs of samples produced under different experimental conditions confirms the expected mechanical properties, low porosity and highly homogenous structure of the multilayers. In addition to the known material stellite 6 the bronze B10 is originally proposed for a rapid prototyping.

  18. Heavy water pumps; Pumpe D{sub 2}O

    Energy Technology Data Exchange (ETDEWEB)

    Zecevic, V; Nikolic, M

    1963-12-15

    Continuous increase of radiation intensity was observed on all the elements in the heavy water system during first three years of RA reactor operation. The analysis of heavy water has shown the existence of radioactive cobalt. It was found that cobalt comes from stellite, cobalt based alloy which was used for coating of the heavy water pump discs in order to increase resistance to wearing. Cobalt was removed from the surfaces due to friction, and transferred by heavy water into the reactor where it has been irradiated for 29 876 MWh up to 8-15 Ci/g. Radioactive cobalt contaminated all the surfaces of aluminium and stainless steel parts. This report includes detailed description of heavy water pumps repair, exchange of stellite coated parts, decontamination of the heavy water system, distillation of heavy water. [Serbo-Croat] U toku prve tri godine eksploatacije reaktora RA uocen je neprekidni porast intenziteta zracenja na svim elementima u teskovodnom sistemu. Analizom teske vode utvrdjeno je postojanje radioaktivnog kobalta. Ustanovljeno je da kobalt potice od stelita, legure na bazi kobalta kojim su presvuceni rukavci vratila teskovodnih pumpi radi otpornosi na habanje. Kobalt je trenjem skidan sa povrsina, u toku rada prenosen je teskom vodom u reaktor i ozracivan u toku 29 876 MWh do specificne aktivnosti 8-15 Ci/g. Radioaktivni kobalt je kontaminirao sve povrsine od aluminijuma i nerdjajuceg celika. Ovaj izvestaj sadrzi detaljan opis remonta pumpi, zamene delova teskovodnih pumpi novim delovima bez stelitnog sloja, dekontaminacije teskovodnog sistema, destilacije teske vode.

  19. Effect of long-term aging at 8150C on the tensile properties and microstructural stability of four cobalt- and nickel-base superalloys

    International Nuclear Information System (INIS)

    Hammond, J.P.

    1976-08-01

    Two heats of Haynes alloy 25 and one heat each of Haynes alloy 188, Hastelloy N, and Inconel 625 were tensile tested after aging for 11,000 h at 816 0 C. Yield strength, ultimate tensile strength, and elongation were determined 24, 316, 760, and 982 0 C and compared with typical properties for these materials in the solution annealed condition. Toughness values were determined for these materials from their engineering stress-strain curves. The long-term aging treatment degraded ductility and toughness at room temperature but, contrary to behavior expected for overaging, enhanced them over those for the solution annealed condition in tests at 760 0 C. The tensile properties of the aged superalloys were correlated with mode of fracture and the amounts, identity, and morphology of the precipitates. Aging substantially depleted the hardener tungsten from the matrix in the cobalt-base alloys

  20. Estimating dispersion from a tornado vortex and mesocyclone

    International Nuclear Information System (INIS)

    Weber, A.H.; Hunter, C.H.

    1996-06-01

    Atmospheric dispersion modeling is required to ensure that a postulated breach in radionuclide storage containers at the Savannah River Site (SRS) from a tornado strike of Fujita-scale intensity F2 or higher will not result in an unacceptable dose to individuals. Fujita-scale tornado descriptions are included in Appendix A of this report. Dispersion models previously used at SRS for estimating dispersion following a tornado strike were developed by D.W. Pepper in 1975 (DP-1387, Dispersion of Small Particles) and H.R. Haynes and D.W. Taylor in 1983 (DPST-82-982, Estimating Doses from Tornado Winds). Research conducted in 1983 on the formation and evolution of tornadic thunderstorms has lead to a more complete understanding of the tornado vortex and associated persistent updraft and downdraft regions within the parent thunderstorm. To ensure that appropriate, contemporary methods are used for safety analysis, the Pepper model and the Haynes and Taylor model were evaluated with respect to current knowledge of circulations within tornadic thunderstorms. Pepper's model is complex numerically but contains most of the desired physical parameterizations. Haynes and Taylor's model is used with the Puff-Plume model (an emergency response model on the Weather INformation and Display System at SRS) and has provisions for radionuclide deposition and rainout. Haynes and Taylor assumed heavy rain following the tornado for a period of ten minutes, followed by a lighter rain for another ten minutes, then no rain for the period when the material is transported to 100 km downwind. However, neither model incorporates the effects of a nearby thunderstorm downdraft

  1. Examining the Psychometric Properties of the Turkish Version of the Parent School Climate Survey and Measuring of Parents’ Perceptions of School Climate by Gender

    OpenAIRE

    Bugay, Aslı; Avcı, Dilek; Özdemir, Selçuk

    2018-01-01

    The studyinvestigated the psychometric properties of the Turkish version of the ParentSchool Climate Survey. The survey was developed by Haynes, Emmons and Comer(1994) to measure the school adaptation and the quality of student-adultrelationship. The scale consists of eight sub-dimensions: academic focus,achievement motivation, attention and sensitivity of school director,collaborative decision-making, parent participation, school building,school-community relationship, and student-teacher re...

  2. Performance and Thrust-to-Weight Optimization of the Dual-Expander Aerospike Nozzle Upper Stage Rocket Engine

    Science.gov (United States)

    2012-06-01

    for chamber cooling jacket, structural jacket, and O2 plumbing INCONEL ® 625 (Annealed) Aluminum 7075 T6 Not compatible with O2 or H2 / Useable for...Special Metals. INCONEL (R) alloy 625 . Publication Number SMC-063. Special Metals Corporation, 2006. [20] Haynes International. "Heat-Resistant Alloy...Copper (C17000 TH04) Oxygen-Free Copper (C10100 1180 Temper) Cobalt (Forged Electrolytic) INCONEL ® 718 (Annealed & Aged) Compatible with O2 / Useable

  3. Environmental characteristics of tropical coral reef-seagrass dominated lagoons (Lakshadweep, India) and implications to resilience to climate change.

    Digital Repository Service at National Institute of Oceanography (India)

    Nobi, E.P.; DineshKumar, P.K.

    , also known as rainforests of the sea, are some of the most diverse ecosystems on earth (Davidson 1998). The health, abundance and diversity of organisms of coral reef ecosystems are directly linked to the surrounding marine environment. Seagrass beds... to a disturbed ecosystem (Gunderson 2000). Since the health and growth of coral and seagrass are regulated by several factors, the environmental monitoring of the coral ecosystem is a challenging study (Bulthius 1983; Haynes et al. 2005; Prange et...

  4. Environmental Aspects of Artificial Aeration and Oxygenation of Reservoirs: A Review of Theory, Techniques, and Experiences.

    Science.gov (United States)

    1982-05-01

    1970; Sirenko et al. 1972; Weiss and Breedlove 1973; Nicholls et al . 1980). In a few experiments, increases in the blue-green Aphanizomenon flos- aguae ...of A. flos- aguae however (Haynes 1975). The timing of mixing in relation to the peak of an algal bloom and the degree of surface microstratification...of particle ingested. Limnol. Oceanogr. 13:675-678. Burns, N.M., and F. Rosa. 1980. In situ measurement of the settling velocity of organic carbon

  5. Global Markets and the Health of American Forests: A Forest Service Perspective

    Science.gov (United States)

    Sally Collins; David Darr; David Wear; Hutch Brown

    2008-01-01

    The United States is rich in forests, yet about 39% of the softwood lumber used by Americans in 2005 came from other countries (WWPA 2006). In fact, the United States has not been “self-sufficient” in lumber (with exports exceeding imports) for more than 40 years. According to Haynes et al. (2007), the trade deficit in lumber has grown from 4.1 billion board feet (bbf...

  6. Ex Vivo Drug Sensitivity Profiles of Plasmodium falciparum Field Isolates from Cambodia and Thailand, 2005 to 2010, Determined by a Histidine-Rich Protein-2 Assay

    Science.gov (United States)

    2012-06-13

    References 1. Desjardins RE, Canfield CJ, Haynes JD, Chulay JD: Quantitative assessment of antimalarial activity in vitro by a semiautomated...potentially concerning. As before, un- regulated availability of antimalarial medications during that period may have been a contributing factor. Not- ably...et al. observed a similar dip in IC50 values for a range of antimalarial drugs in 2006, and attributed the observa- tion to sampling bias since most

  7. Optimizing the HRP-2 In Vitro Malaria Drug Susceptibility Assay Using a Reference Clone to Improve Comparisons of Plasmodium falciparum Field Isolates

    Science.gov (United States)

    2012-09-13

    6. Desjardins RE, Canfield CJ, Haynes JD, Chulay JD: Quantitative assessment of antimalarial activity in vitro by a semiautomated microdilution...vitro antimalarial drug efficacy testing and application to clinical isolates. Antimicrob Agents Chemother 2007, 51:1172–1178. 12. Akala HM, Eyase FL...Cheruiyot AC, Omondi AA, Ogutu BR, Waters NC, Johnson JD, Polhemus ME, Schnabel DC, Walsh DS: Antimalarial drug sensitivity profile of western Kenya

  8. Core Operations of the Metals and Ceramics Information Center (A DoD information Analysis Center)

    Science.gov (United States)

    1990-08-30

    1214 Hy-Tuf Steel 12 Sep 4208 Wassaloy? 36 Dec 1215 Nitralloy 135 Mod 8 Dec 4310 Haynes Alloy 188 40 1987 Mar 1203 4140 Sterl 34 Mar 1601 A-286 Steel 37...BE /Ej*Az5 pofj.’t FRACT UjPE CATA FOR AISI 521 ,O ALLCY STEEL r-L’I1 AFS. 6 L Pesconm C OPY OF SELECTED DATA FAxED ,-T LCCP"EED 1MILES A AE OPol.es

  9. Proceedings of the AMEDD (Army Medical Department) Clinical Psychology Short Course: Military Applications of Neuropsychology and Health Psychology Held in Presidio of San Francisco, California on 9-13 March 1987. Volume 1

    Science.gov (United States)

    1987-03-01

    syndrome. Medical Clinics of North America, 70, 708-719. Barnes, Deborah (1986) Grim projections for AIDS epidemic. Science, 232, 1589- 1590 . Bennett, J. A...65_ 96-97. Redfield, R. R., Wright, D. C. & Tramount, E. C. (1986) The Walter Reed staging classification for IfrLV-IIt/LAV Infection. The New England ... women with blood and cardiovascular findings. Circulation, 24, 1173-1184. Sackett, D., Taylor, D., Haynes, R., Johnson, A., Gibson, E., & Roberts, R

  10. Correlation of creep rate with microstructural changes during high temperature creep

    Science.gov (United States)

    Young, C. T.; Sommers, B. R.; Lytton, J. L.

    1977-01-01

    Creep tests were conducted on Haynes 188 cobalt-base alloy and alpha titanium. The tests on Haynes 188 were conducted at 1600 F and 1800 F for stresses from 3 to 20 ksi, and the as-received, mill-annealed results were compared to specimens given 5%, 10%, and 15% room temperature prestrains and then annealed one hour at 1800 F. The tests on alpha titanium were performed at 7,250 and 10,000 psi at 500 C. One creep test was done at 527 C and 10,000 psi to provide information on kinetics. Results for annealed titanium were compared to specimens given 10% and 20% room temperature prestrains followed by 100 hours recovery at 550 C. Electron microscopy was used to relate dislocation and precipitate structure to the creep behavior of the two materials. The results on Haynes 188 alloy reveal that the time to reach 0.5% creep strain at 1600 F increases with increasing prestrain for exposure times less than 1,000 hours, the increase at 15% prestrain being more than a factor of ten.

  11. An innovation diffusion model of a local electricity network that is influenced by internal and external factors

    Science.gov (United States)

    Hattam, Laura; Greetham, Danica Vukadinović

    2018-01-01

    Haynes et al. (1977) derived a nonlinear differential equation to determine the spread of innovations within a social network across space and time. This model depends upon the imitators and the innovators within the social system, where the imitators respond to internal influences, whilst the innovators react to external factors. Here, this differential equation is applied to simulate the uptake of a low-carbon technology (LCT) within a real local electricity network that is situated in the UK. This network comprises of many households that are assigned to certain feeders. Firstly, travelling wave solutions of Haynes' model are used to predict adoption times as a function of the imitation and innovation influences. Then, the grid that represents the electricity network is created so that the finite element method (FEM) can be implemented. Next, innovation diffusion is modelled with Haynes' equation and the FEM, where varying magnitudes of the internal and external pressures are imposed. Consequently, the impact of these model parameters is investigated. Moreover, LCT adoption trajectories at fixed feeder locations are calculated, which give a macroscopic understanding of the uptake behaviour at specific network sites. Lastly, the adoption of LCTs at a household level is examined, where microscopic and macroscopic approaches are combined.

  12. Electronic monitoring of patient adherence to oral antihypertensive medical treatment: a systematic review.

    Science.gov (United States)

    Christensen, Arne; Osterberg, Lars G; Hansen, Ebba Holme

    2009-08-01

    Poor patient adherence is often the reason for suboptimal blood pressure control. Electronic monitoring is one method of assessing adherence. The aim was to systematically review the literature on electronic monitoring of patient adherence to self-administered oral antihypertensive medications. We searched the Pubmed, Embase, Cinahl and Psychinfo databases and websites of suppliers of electronic monitoring devices. The quality of the studies was assessed according to the quality criteria proposed by Haynes et al. Sixty-two articles were included; three met the criteria proposed by Haynes et al. and nine reported the use of electronic adherence monitoring for feedback interventions. Adherence rates were generally high, whereas average study quality was low with a recent tendency towards improved quality. One study detected investigator fraud based on electronic monitoring data. Use of electronic monitoring of patient adherence according to the quality criteria proposed by Haynes et al. has been rather limited during the past two decades. Electronic monitoring has mainly been used as a measurement tool, but it seems to have the potential to significantly improve blood pressure control as well and should be used more widely.

  13. Mechanical characterization of superalloys for space reactors

    International Nuclear Information System (INIS)

    Duchesne, J.

    1989-01-01

    The purpose of this work is the choice of materials usable between 600 and 900 0 C for nuclear space reactor structures. The main criterion of selection for these materials is their good creep behaviour. Consequently, macroscopic theories of creep and several extrapolation methods were described. Superalloys seem the best materials for the studied range of temperatures. Five of them, base nickel, ones unusual in nuclear industry were selected for their good mechanical properties. Three of them are industrial alloys: the first, HAYNES 230 is a recent one, HASTELLOY S and X are more standard materials. The last two, HASTELLOY XR and PYRAD 38 D are issued from special fabrications. Creep tests metallographic investigations, hardness and tensile tests were performed. A contraction of samples was observed during some creep tests under a low stress, 20MPa at 800 0 C, for HAYNES 230 and HASTELLOY X. This could be due to a structural evolution of these materials connected to a decrease of the cristalline parameter. In addition, correlations were observed between certain characteristics determined from slow tensile tests and short duration creep tests. These correlations present a large interest because, at the present time, creep tests cannot be executed on irradiated materials in our laboratories. Consequently creep behaviour of irradiated materials seem may be deduced. Further studies are needed to explain and confirm the behaviour of the most interesting materials under low stresses: HAYNES 230 and HASTELLOY XR to anticipate their behaviour in working conditions [fr

  14. ALARA efforts in nordic BWRs

    Energy Technology Data Exchange (ETDEWEB)

    Ingemansson, T.; Lundgren, K.; Elkert, J. [ABB Atom, Vaesteraes (Sweden)

    1995-03-01

    Some ALARA-related ABB Atom projects are currently under investigation. One of the projects has been ordered by the Swedish Radiation Protection Institute, and two others by the Nordic BWR utilities. The ultimate objective of the projects is to identify and develop methods to significantly decrease the future exposure levels in the Nordic BWRS. As 85% to 90% of the gamma radiation field in the Nordic BWRs originates from Co-60, the only way to significantly decrease the radiation doses is to effect Co and Co-60. The strategy to do this is to map the Co sources and estimate the source strength of Co from these sources, and to study the possibility to affect the release of Co-60 from the core surfaces and the uptake on system surfaces. Preliminary results indicate that corrosion/erosion of a relatively small number of Stellite-coated valves and/or dust from grinding of Stellite valves may significantly contribute to the Co input to the reactors. This can be seen from a high measured Co/Ni ratio in the feedwater and in the reactor water. If stainless steel is the only source of Co, the Co/Ni ratio would be less than 0.02 as the Co content in the steel is less than 0.2%. The Co/Ni ratio in the reactor water, however, is higher than 0.1, indicating that the major fraction of the Co originates from Stellite-coated valves. There are also other possible explanations for an increase of the radiation fields. The Co-60 inventory on the core surfaces increases approximately as the square of the burn-up level. If the burn-up is increased from 35 to 5 MWd/kgU, the Co-60 inventory on the core surfaces will be doubled. Also the effect on the behavior of Co-60 of different water chemistry and materials conditions is being investigated. Examples of areas studied are Fe and Zn injection, pH-control, and different forms of surface pre-treatments.

  15. Materials for Advanced Ultrasupercritical Steam Turbines Task 4: Cast Superalloy Development

    Energy Technology Data Exchange (ETDEWEB)

    Thangirala, Mani

    2015-09-30

    The Steam Turbine critical stationary structural components are high integrity Large Shell and Valve Casing heavy section Castings, containing high temperature steam under high pressures. Hence to support the development of advanced materials technology for use in an AUSC steam turbine capable of operating with steam conditions of 760°C (1400°F) and 35 Mpa (5000 psia), Casting alloy selection and evaluation of mechanical, metallurgical properties and castability with robust manufacturing methods are mandated. Alloy down select from Phase 1 based on producability criteria and creep rupture properties tested by NETL-Albany and ORNL directed the consortium to investigate cast properties of Haynes 282 and Haynes 263. The goals of Task 4 in Phase 2 are to understand a broader range of mechanical properties, the impact of manufacturing variables on those properties. Scale up the size of heats to production levels to facilitate the understanding of the impact of heat and component weight, on metallurgical and mechanical behavior. GE Power & Water Materials and Processes Engineering for the Phase 2, Task 4.0 Castings work, systematically designed and executed casting material property evaluation, multiple test programs. Starting from 15 lbs. cylinder castings to world’s first 17,000 lbs. poured weight, heavy section large steam turbine partial valve Haynes 282 super alloy casting. This has demonstrated scalability of the material for steam Turbine applications. Activities under Task 4.0, Investigated and characterized various mechanical properties of Cast Haynes 282 and Cast Nimonic 263. The development stages involved were: 1) Small Cast Evaluation: 4 inch diam. Haynes 282 and Nimonic 263 Cylinders. This provided effects of liquidus super heat range and first baseline mechanical data on cast versions of conventional vacuum re-melted and forged Ni based super alloys. 2) Step block castings of 300 lbs. and 600 lbs. Haynes 282 from 2 foundry heats were evaluated which

  16. Synthesis Of NiCrAlC alloys by mechanical alloying

    International Nuclear Information System (INIS)

    Silva, A.K.; Pereira, J.I.; Vurobi Junior, S.; Cintho, O.M.

    2010-01-01

    The purpose of the present paper is the synthesis of nickel alloys (NiCrAlC), which has been proposed like a economic alternative to the Stellite family Co alloys using mechanical alloying, followed by sintering heat treatment of milled material. The NiCrAlC alloys consist of a chromium carbides dispersion in a Ni 3 Al intermetallic matrix, that is easily synthesized by mechanical alloying. The use of mechanical alloying enables higher carbides sizes and distribution control in the matrix during sintering. We are also investigated the compaction of the processed materials by compressibility curves. The milling products were characterized by X-ray diffraction, and the end product was featured by conventional metallography and scanning electronic microscopy (SEM), that enabled the identification of desired phases, beyond microhardness test, which has been shown comparable to alloys manufactured by fusion after heat treating. (author)

  17. Absorptivity Measurements and Heat Source Modeling to Simulate Laser Cladding

    Science.gov (United States)

    Wirth, Florian; Eisenbarth, Daniel; Wegener, Konrad

    The laser cladding process gains importance, as it does not only allow the application of surface coatings, but also additive manufacturing of three-dimensional parts. In both cases, process simulation can contribute to process optimization. Heat source modeling is one of the main issues for an accurate model and simulation of the laser cladding process. While the laser beam intensity distribution is readily known, the other two main effects on the process' heat input are non-trivial. Namely the measurement of the absorptivity of the applied materials as well as the powder attenuation. Therefore, calorimetry measurements were carried out. The measurement method and the measurement results for laser cladding of Stellite 6 on structural steel S 235 and for the processing of Inconel 625 are presented both using a CO2 laser as well as a high power diode laser (HPDL). Additionally, a heat source model is deduced.

  18. Cobalt-60 control in Ontario Hydro reactors

    International Nuclear Information System (INIS)

    Lacy, C.S.

    1988-01-01

    This paper discusses the impact of specifying reduced Cobalt-59 in the primary heat transport circuit materials of construction on the radiation fields developed around the primary circuit. An eight-fold reduction in steam generator radiation fields due to Cobalt-60 has been observed for two identical sets of reactors, one with and one without Cobalt-59 control. The comparison is between eight reactors at the Pickering Nuclear Generating Station (PNGS). Units 5 to 8 (PNGS-B) are identical to Units 1 to 4 (PNGS-A) except that PNGS-B has reduced impurity Cobalt-59 in the alloys of construction and a reduced use of stellite. The effects of chemistry control are also discussed

  19. Test methods for selection of materials of construction for high-level radioactive waste vitrification. Revision

    International Nuclear Information System (INIS)

    Bickford, D.F.; Corbett, R.A.; Morrison, W.S.

    1986-01-01

    Candidate materials of construction were evaluated for a facility at the Department of Energy's Savannah River Plant to vitrify high-level radioactive waste. Limited operating experience was available under the corrosive conditions of the complex vitrification process. The objective of the testing program was to provide a high degree of assurance that equipment will meet or exceed design lifetimes. To meet this objective in reasonable time and minimum cost, a program was designed consisting of a combination of coupon immersion and electrochemical laboratory tests and pilot-scale tests. Stainless steels and nickel-based alloys were tested. Alloys that were most resistant to general and local attack contained nickel, molybdenum (>9%), and chromium (where Cr + Mo > 30%). Alloy C-276 was selected as the reference material for process equipment. Stellite 6 was selected for abrasive service in the presence of formic acid. Alloy 690 and ALLCORR were selected for specific applications

  20. Synthesis Of NiCrAlC alloys by mechanical alloying; Sintese de ligas NiCrAlC por moagem de alta energia

    Energy Technology Data Exchange (ETDEWEB)

    Silva, A.K.; Pereira, J.I.; Vurobi Junior, S.; Cintho, O.M., E-mail: alissonkws@gmail.co [Universidade Estadual de Ponta Grossa (UEPG), PR (Brazil)

    2010-07-01

    The purpose of the present paper is the synthesis of nickel alloys (NiCrAlC), which has been proposed like a economic alternative to the Stellite family Co alloys using mechanical alloying, followed by sintering heat treatment of milled material. The NiCrAlC alloys consist of a chromium carbides dispersion in a Ni{sub 3}Al intermetallic matrix, that is easily synthesized by mechanical alloying. The use of mechanical alloying enables higher carbides sizes and distribution control in the matrix during sintering. We are also investigated the compaction of the processed materials by compressibility curves. The milling products were characterized by X-ray diffraction, and the end product was featured by conventional metallography and scanning electronic microscopy (SEM), that enabled the identification of desired phases, beyond microhardness test, which has been shown comparable to alloys manufactured by fusion after heat treating. (author)

  1. Recent experience about the influence of primary coolant and shutdown chemistry on cobalt activity at Beznau NPP

    International Nuclear Information System (INIS)

    Mailand, I.; Venz, H.

    2007-01-01

    The Beznau nuclear power plant comprises two identical 380 MWe PWR units, commissioned in 1969 and 1971. The surfaces of the new steam generator tube material, Inconel 690, are the main source of 58 Co. The 60 Co originates predominantly from the Cobalt alloy, Stellite, which is installed in valves and pump bearings because of the very good hardness of this material. By means of optimised shutdown chemistry it is possible to reduce the amount of NiO on the fuel rods, leading to reduced Co-58 peaks in subsequent cycles. The optimised shutdown chemistry during the past few years and especially the strict separation of acid-reducing phase from the acid-oxidising phase as well as the results of studies and the resulting operational experiences are important basics for the actual operation mode of the Beznau NPP. (orig.)

  2. Laser fabrication nanocrystalline coatings using simultaneous powders/wire feed

    Science.gov (United States)

    Li, Jianing; Zhai, Tongguang; Zhang, Yuanbin; Shan, Feihu; Liu, Peng; Ren, Guocheng

    2016-07-01

    Laser melting deposition (LMD) fabrication is used to investigate feasibilty of simultaneously feeding TC17 wire and the Stellite 20-Si3N4-TiC-Sb mixed powders in order to increase the utilization ratio of materials and also quality of LMD composite coatings on the TA1 substrate. SEM images indicated that such LMD coating with metallurgical joint to substrate was formed free of the obvious defects. Lots of the ultrafine nanocrystals (UNs) were produced, which distributed uniformly in some coating matrix location, retarding growth of the ceramics in a certain extent; UNs were intertwined with amorphous, leading the yarn-shape materials to be produced. Compared with substrate, an improvement of wear resistance was achieved for such LMD coating.

  3. Conclusion of the commission for determining wear out of Avala heavy water pump bearings - Annex 1; Prilog1 - Zakljucak komisije za utvrdjivanje istrosenosti lezista teskovodne pumpe Avala

    Energy Technology Data Exchange (ETDEWEB)

    Nikolic, M; Bratic, A; Zaric, Z; Vidmar, M; Kirilin, J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

    1963-12-15

    After dismantling of the CEN-132 pump the findings of the Commission were: the wear-out of the surfaces of the pump bearings and one disc caused appearance of about 39 grams of cobalt in the heavy water system of the reactor. This report includes: results of chemical analysis of stellite taken form pump disc, results of measuring the wear-out of the upper pump bearing, drawing of the worn-out disc and upper cladding of the pump, and a photo of the upper surface of the disc. [Serbo-Croat] Posle demontaze pumpe CEN-132, pregleda detalja i izvrsenih merenja komisija je konstatovala da je zbog istrosenosti lezista diska pumpe i istrosenosti gornje caure u teskovodni sistem dospelo ukupno 39 grama kobalta. Ovaj dokument sadrzi i rezultate hemijske analize stelita skinutog sa diska pumpe, rezultate merenja istrosenosti gornjeg lezista teskovodne pumpe, crteze istrosnog diska skinutog sa pumpe, crteze gornje caure, fotografiju gornje povrsine diska.

  4. Cladding using a 15 kW CO2 laser

    International Nuclear Information System (INIS)

    Vesely, E.J.; Verma, S.K.

    1989-01-01

    Laser alloying or cladding differs little in principle from the traditional forms of weld overlays, but lasers as a heat source offer some distinct advantages. With the selective heating attainable using high power lasers, good metallurgical bond of the clad layer, minimal dilution and typically, a very fine homogeneous microstructure can be obtained in the clad layer. This is a review of work in laser cladding using the 15 kW CO 2 laser. The authors discuss the ability of the laser clad surface to increase the high temperature oxidation resistance of a low-alloy carbon steel (4140). Examples of clads subjected to high- temperature thermal cycling of nickel-20% aluminum and TaC + 4140 clad low-alloy steel and straight high-temperature oxidation of Stellite 6-304L cladding on a 4140 substrate are given

  5. Experimental evaluation of the wear of the PEC type fuel element base. Tribological experimental studies in Na at high temperature

    International Nuclear Information System (INIS)

    D'Agraives, B.C.; Volcan, A.; Bacchilega, A.

    1978-01-01

    Tribological studies in sodium, related to the PEC-type fuel element design are presented. They are aimed at the simulation of friction and wear phenomena which are expected to occur on the surface of fuel element components undergoing solid-solid contact situations with variable loads and/or variable motions. In this first paper, a description of the preparatory work is given. Then, results related to long-duration experiments are shown with respect to the contact between the centering spherical ring belonging to the lower extension of the subassembly, and the cylindrical sleeve of the grid in which it takes place. After 1000 hours under loaded and vibrated conditions, in sodium at 400 0 C, the wear effects suffered by both contacting samples, are observed and evaluated. The stellite surfaces of the samples are damaged to a not-negligible extent and material transfers from the cylindrical sleeve onto the spherical ring occur

  6. Reactive Fabrication and Effect of NbC on Microstructure and Tribological Properties of CrS Co-Based Self-Lubricating Coatings by Laser Cladding.

    Science.gov (United States)

    Fang, Liuyang; Yan, Hua; Yao, Yansong; Zhang, Peilei; Gao, Qiushi; Qin, Yang

    2017-12-28

    The CrS/NbC Co-based self-lubricating composite coatings were successfully fabricated on Cr12MoV steel surface by laser clad Stellite 6, WS₂, and NbC mixed powders. The phase composition, microstructure, and tribological properties of the coatings ware investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectrometer (EDS), as well as dry sliding wear testing. Based on the experimental results, it was found reactions between WS₂ and Co-based alloy powder had occurred, which generated solid-lubricant phase CrS, and NbC play a key role in improving CrS nuclear and refining microstructure of Co-based composite coating during laser cladding processing. The coatings were mainly composed of γ-Co, CrS, NbC, Cr 23 C₆, and CoC x . Due to the distribution of the relatively hard phase of NbC and the solid lubricating phase CrS, the coatings had better wear resistance. Moreover, the suitable balance of CrS and NbC was favorable for further decreasing the friction and improving the stability of the contact surfaces between the WC ball and the coatings. The microhardness, friction coefficient, and wear rate of the coating 4 (Clad powders composed of 60 wt % Stellite 6, 30 wt % NbC and 10 wt % WS₂) were 587.3 HV 0.5 , 0.426, and 5.61 × 10 -5 mm³/N·m, respectively.

  7. Reactive Fabrication and Effect of NbC on Microstructure and Tribological Properties of CrS Co-Based Self-Lubricating Coatings by Laser Cladding

    Directory of Open Access Journals (Sweden)

    Liuyang Fang

    2017-12-01

    Full Text Available The CrS/NbC Co-based self-lubricating composite coatings were successfully fabricated on Cr12MoV steel surface by laser clad Stellite 6, WS2, and NbC mixed powders. The phase composition, microstructure, and tribological properties of the coatings ware investigated by means of X-ray diffraction (XRD, scanning electron microscopy (SEM, and energy dispersive spectrometer (EDS, as well as dry sliding wear testing. Based on the experimental results, it was found reactions between WS2 and Co-based alloy powder had occurred, which generated solid-lubricant phase CrS, and NbC play a key role in improving CrS nuclear and refining microstructure of Co-based composite coating during laser cladding processing. The coatings were mainly composed of γ-Co, CrS, NbC, Cr23C6, and CoCx. Due to the distribution of the relatively hard phase of NbC and the solid lubricating phase CrS, the coatings had better wear resistance. Moreover, the suitable balance of CrS and NbC was favorable for further decreasing the friction and improving the stability of the contact surfaces between the WC ball and the coatings. The microhardness, friction coefficient, and wear rate of the coating 4 (Clad powders composed of 60 wt % Stellite 6, 30 wt % NbC and 10 wt % WS2 were 587.3 HV0.5, 0.426, and 5.61 × 10−5 mm3/N·m, respectively.

  8. Modelling of residual stresses in valves Norem hard-facing alloys: a material characterization issue

    International Nuclear Information System (INIS)

    Mathieu, J.P.; Arnoldi, F.; Gauthier, E.; Beaurin, G.

    2011-01-01

    Replacement of cobalt-based hard-facing alloys (Stellite) is of high interest within the topic of reduction of human radiation exposure during field-work. Iron-based hard-facing alloys, such as Norem, are considered as good replacement candidates. Their wear characteristics are known to be quite equivalent to Stellite but are counter-balanced by lack of feedback in the field, especially about their resistance/toughness to brutal thermal shocks (60 C - 280 C for primary water). Norem alloys show a solid-solution strengthened austenitic dendrites matrix with a continuous network of eutectic and non-eutectic carbides at the grain boundaries. Toughness evaluation also requires information about residual stresses due to the welding (deposition) process: this work aims at furnishing tools for this purpose. First part of the work involved a microstructural study in order to compare the as-received material to other Norem samples previously observed in EDF's works and literature. A characterization of the different phase evolutions after heating and fast cooling of Norem is then made, in order to characterize whether metallurgical aspects have to be considered in the mechanical part during welding modelling: it appears that no strong solid-solid phase transformation may occur in welding situation. Tensile characterization is then performed on bulk PTAW (Plasma Transferred Arc Welding) specimens. A simplified welding simulation is eventually conducted on different axis-symmetric geometry and on real valve geometry in order to define a representative sample that will be used for further investigation on residual stresses. (authors)

  9. Microstructural Evolution and Creep-Rupture Behavior of A-USC Alloy Fusion Welds

    Science.gov (United States)

    Bechetti, Daniel H.; DuPont, John N.; Siefert, John A.; Shingledecker, John P.

    2016-09-01

    Characterization of the microstructural evolution of fusion welds in alloys slated for use in advanced ultrasupercritical (A-USC) boilers during creep has been performed. Creep-rupture specimens involving INCONEL® 740, NIMONIC® 263 (INCONEL and NIMONIC are registered trademarks of Special Metals Corporation), and Haynes® 282® (Haynes and 282 are registered trademarks of Haynes International) have been analyzed via light optical microscopy, scanning electron microscopy, X-ray diffraction, and thermodynamic and kinetic modeling. Focus has been given to the microstructures that develop along the grain boundaries in these alloys during creep at temperatures relevant to the A-USC process cycle, and particular attention has been paid to any evidence of the formation of local γ'-denuded or γ'-free zones. This work has been performed in an effort to understand the microstructural changes that lead to a weld strength reduction factor (WSRF) in these alloys as compared to solution annealed and aged alloy 740 base metal. γ' precipitate-free zones have been identified in alloy 740 base metal, solution annealed alloy 740 weld metal, and alloy 263 weld metal after creep. Their development during long-term thermal exposure is correlated with the stabilization of phases that are rich in γ'-forming elements ( e.g., η and G) and is suppressed by precipitation of phases that do not contain the γ' formers ( e.g., M23C6 and μ). The location of failure and creep performance in terms of rupture life and WSRF for each welded joint is presented and discussed.

  10. Modeling the Effects of Onsite Wastewater Treatment Systems on Nitrate Loads Using SWAT in an Urban Watershed of Metropolitan Atlanta.

    Science.gov (United States)

    Hoghooghi, Nahal; Radcliffe, David E; Habteselassie, Mussie Y; Jeong, Jaehak

    2017-05-01

    Onsite wastewater treatment systems (OWTSs) can be a source of nitrogen (N) pollution in both surface and ground waters. In metropolitan Atlanta, GA, >26% of homes are on OWTSs. In a previous article, we used the Soil Water Assessment Tool to model the effect of OWTSs on stream flow in the Big Haynes Creek Watershed in metropolitan Atlanta. The objective of this study was to estimate the effect of OWTSs, including failing systems, on nitrate as N (NO-N) load in the same watershed. Big Haynes Creek has a drainage area of 44 km with mainly urban land use (67%), and most of the homes use OWTSs. A USGS gauge station where stream flow was measured daily and NO-N concentrations were measured monthly was used as the outlet. The model was simulated for 12 yr. Overall, the model showed satisfactory daily stream flow and NO-N loads with Nash-Sutcliffe coefficients of 0.62 and 0.58 for the calibration period and 0.67 and 0.33 for the validation period at the outlet of the Big Haynes Watershed. Onsite wastewater treatment systems caused an average increase in NO-N load of 23% at the watershed scale and 29% at the outlet of a subbasin with the highest density of OWTSs. Failing OWTSs were estimated to be 1% of the total systems and did not have a large impact on stream flow or NO-N load. The NO-N load was 74% of the total N load in the watershed, indicating the important effect of OWTSs on stream loads in this urban watershed. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  11. Joining of ceramic Ba0.5Sr0.5Co0.8Fe0.2O3 membranes for oxygen production to high temperature alloys

    DEFF Research Database (Denmark)

    Kiebach, Wolff-Ragnar; Engelbrecht, Kurt; Kwok, Kawai

    2016-01-01

    /reactivity and their thermal expansion coefficient on the stability of the final joint was evaluated. Leak tight assemblies were obtained only for steels with a thermal expansion coefficient of > 16 [10(-6) K-1] and protective coating. Proof-of-concept oxygen flux measurements up to 830 degrees C were performed......The possibility of joining dense ceramic BCSF tubular membranes to metal alloys using a silver braze was investigated. Four different alloys (Crofer 22 APU (R), Kanthal APM (R), Haynes 214 (R) and EN 1.4841) were considered and the influence of their oxide scale stability...

  12. Safety/security interface assessments at commercial nuclear power plants

    International Nuclear Information System (INIS)

    Byers, K.R.; Brown, P.J.; Norderhaug, L.R.

    1985-01-01

    The findings of the Haynes Task Force Committee (NUREG-0992) are used as the basis for defining safety/security assessment team activities at commercial nuclear power plants in NRC Region V. A safety/security interface assessment outline and the approach used for making the assessments are presented along with the composition of team members. As a result of observing simulated plant emergency conditions during scheduled emergency preparedness exercises, examining security and operational response procedures, and interviewing plant personnel, the team has identified instances where safety/security conflicts can occur

  13. Proceedings of the Workshop on Meteorological and Environmental Inputs to Aviation Systems (6th) Held at the University of Tennessee Space Institute on 26-28 October 1982,

    Science.gov (United States)

    1983-04-01

    20. Tom Greer 60. Robert Bonner 100. Frank Van Demark 21. John Klehr 61. Tommy Trimble 101. Art Hansen 22. Terrell Wilson 62. Wen Painter 102, Ossi...information provided to him. ARF is planned as an enhancement to the auto- matic flight service station program. The FOLLOW-UP RESPONSE: Terrell ...204 1975). FS 409 (June 1g8l). (8 409ns (June "D o o(21) "Aircraft Wake Vortices: A State-of-the- (8) Haynes, Ann , "Description of a Program Art

  14. Safety/security interface assessments at commercial nuclear power plants

    International Nuclear Information System (INIS)

    Byers, K.R.; Brown, P.J.; Norderhaug, L.R.

    1985-07-01

    The findings of the Haynes Task Force Committee (NUREG-0992) are used as the basis for defining safety/security assessment team activities at commercial nuclear power plants in NRC Region V. A safety/security interface assessment outline and the approach used for making the assessments are presented along with the composition of team members. As a result of observing simulated plant emergency conditions during scheduled emergency preparedness exercises, examining security and operational response procedures, and interviewing plant personnel, the team has identified instances where safety/security conflicts can occur. 2 refs

  15. First record of Bruchidius raddianae in Italy: infested seeds of Vachellia karroo from Lampedusa island (Coleoptera: Bruchidae; Fabales: Fabaceae

    Directory of Open Access Journals (Sweden)

    Luciano Toma

    2017-06-01

    Full Text Available Bruchidius raddianae (Anton & Delobel 2003, a species of seed beetle spread in Northern Africa, was detected for the first time in Europe in some localities of the Southern Iberian Peninsula in 2007. In Spain this coleopteran lives on the shrubs of the South African acacia tree, Vachellia karroo (Hayne Banfi & Galasso, currently present in the Southern Iberian Peninsula. From seeds of V. karroo collected in October 2015, in Lampedusa island, Italy, where this plant is widely spread, 45 specimens of this coleopteran emerged. This observation represents the first record of B. raddianae in Italy and the second one for Europe.

  16. A quantitative comparison of moldic and vuggy porosity structure in karst aquifers using image and geospatial analysis

    Science.gov (United States)

    Culpepper, A. R.; Manda, A. K.

    2011-12-01

    Limestone aquifers are vital sources of groundwater for domestic and industrial use throughout the world. To sustain rising population throughout the southeastern United States, aquifers are increasingly exploited to provide the populace clean and reliable water resources. The moldic Castle Hayne and the vuggy Biscayne aquifer systems are two highly productive aquifers that provide critical water resources to millions of citizens in eastern North Carolina and southeastern Florida, respectively. In order to better understand karst aquifers and evaluate the potential for contaminant transport, detailed investigation of 2D porosity and pore geometry using image and geospatial analysis were undertaken. The objective of this study is to compare and contrast the porosity structure of moldic and vuggy karst aquifers by quantifying 2D porosity and pore geometry from images of slabbed core samples and optical televiewer images. Televiewer images and images of painted core samples from the Spring Garden Member of the Castle Hayne aquifer and Miami Limestone Formation of the Biscayne aquifer were acquired for analysis of porosity structure. The procedure for converting images of slabbed core and televiewer images to a GIS useable format consisted of rectification, calibration, image enhancement, classification, recoding and filtering. In GIS, raster or vector formats were used to assess pore attributes (e.g., area and perimeter) and structure. Preliminary results show that both pore area and perimeter for the Spring Garden Member of the Castle Hayne and Miami Limestone Formation of the Biscayne aquifers can be described by exponential distributions. In both sets of slabbed core images the relatively small pores have the highest occurrence, whereas larger pores occur less frequently. However, the moldic Spring Garden Member of the Castle Hayne aquifer has larger pore sizes derived from cores images than the vuggy Miami Limestone Formation of Biscayne aquifer. Total porosity

  17. CHEMTAX-derived phytoplankton community structure associated with temperature fronts in the northeastern Arabian Sea..

    Digital Repository Service at National Institute of Oceanography (India)

    Roy, R; Chitari, R; Kulkarni, V.; Krishna, M.S.; Sarma, V.V.S.S.; Anil, A.C.

    and northern Arabian Sea. Deep-Sea Res. I 34, 713-723. Barlow, R., Kyewalyanga, M., Sessions, H., Van den Berg, M., Morris, T., 2008. Phytoplankton pigments, functional types, and absorption properties in the Delagoa and Natal Bights of the Agulhas... for Prochlorococcus sp. in low-light suboxic environments in the Arabian Sea and the Eastern Tropical North Pacific. Deep-Sea Res. I. 47, 1183-1205. Grasshoff, K., Erhardt, M., Kremiling, K., 1983. Methods of seawater analysis, Verlag Chemie. 419 Haynes, R...

  18. Novel Electromagnetic - Ultrasound Synergistic Technique for Treatment of Cancer

    Science.gov (United States)

    2013-11-01

    6 APPENDICES……….…………………………………………………….…. 8 Partnering PI Final Progress Report: DOD Award BC095397P1 Initiating PI: Mahta Moghaddam...and Volume Integral Formulation Mark Haynes, Member, IEEE, sacha a. M. Verweij, Mahta Moghaddam, Fellow, IEEE, and Paul l. carson, Senior Member... Mahta Moghaddam, Fellow, IEEE Abstract—A preclinical prototype of a transcutaneous thermal therapy system has been developed for the targeted treatment

  19. Genital piercings: what is known and what people with genital piercings tell us.

    Science.gov (United States)

    Armstrong, Myrna L; Caliendo, Carol; Roberts, Alden E

    2006-06-01

    General and subjective information about those who chose to obtain genital piercings was presented. Particularly, the assumptions made from the literature are refuted by objective and subjective data collected from intimately pierced individuals themselves. Professional nurses must not base practice decisions on assumptions but on the "best evidence with clinical experience, research, (as well as) associated patient values" (Sackett, Strauss, Richardson, Rosenberg, & Haynes, 2001, p. 10). Thus, providing clinically competent care is driven by the latest knowledge and evidence from research and patient sources. Data found here provide further empirical evidence that may help to improve client outcomes by advancing evidence-based nursing practice in relation to people with genital piercings.

  20. A sulfidation-resistant nickel-base alloy

    International Nuclear Information System (INIS)

    Lai, G.Y.

    1989-01-01

    For applications in mildly to moderately sulfidizing environments, stainless steels, Fe-Ni-Cr alloys (e.g., alloys 800 and 330), and more recently Fe-Ni-Cr-Co alloys (e.g., alloy 556) are frequently used for construction of process equipment. However, for many highly sulfidizing environments, few existing commercial alloys have adequate performance. Thus, a new nickel-based alloy containing 27 wt.% Co, 28 wt.% Cr, 4 wt.% Fe, 2.75 wt.% Si, 0.5 wt.% Mn and 0.05 wt.% C (Haynes alloy HR-160) was developed

  1. Pesquisa de antifúngicos de origem vegetal

    OpenAIRE

    Domingos, Telma

    2009-01-01

    Dissertação mest., Engenharia Biológica, Universidade do Algarve, 2009 Este trabalho foi realizado com o objectivo de avaliar in vitro as propriedades antifúngicas de vários extractos de Drosophyllum lusitanicum Link. e Drosera intermedia Hayne. A actividade antifúngica foi avaliada em várias espécies de fungos filamentosos (Aspergillus niger, Aspergillus flavus, Aspergillus fumigatus, Aspergillus parasiticus e Penicillium expansum) e leveduras de alteração alimentar (Debaryomyces hansenii...

  2. Interrogation of Detainees: Overview of the McCain Amendment

    Science.gov (United States)

    2006-10-23

    shocks in one circumstance might not be considered so egregious in another); Miller v. City of Philadelphia, 174 F. 3d 368, 375 (3rd Cir.1999) (“The...concurring). 15 Hope v. Pelzer, 536 U.S. 730 (2002). 16 Chandler v. Crosby, 379 F. 3d 1278 (11th Cir. 2004). 17 Haynes v. Washington, 373 U.S. 503 (1963...and that taken by S. 3861, S. 3886, and H.R. 6054. Kate Zernike & Sheryl Gay Stolberg, Differences Settled in Deal Over Detainee Treatment, NY

  3. Case Studies on the Effectiveness of State Financial Incentives for Renewable Energy

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-09-01

    September 2002 · NREL/SR-620-32819 Case Studies on the Effectiveness of State Financial Incentives for Renewable Energy S. Gouchoe, V. Everette, and R. Haynes North Carolina State University Raleigh, North Carolina National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401-3393 NREL is a U.S. Department of Energy Laboratory Operated by Midwest Research Institute · Battelle · Bechtel Contract No. DE-AC36-99-GO10337 September 2002 · NREL/SR-620-32819Case Studies on the Effecti

  4. Structural rearrangements detected in newly-formed hexaploid ...

    Indian Academy of Sciences (India)

    signals were observed on the Epifluorescence microscope ... Images were cap- ... the chromosome pairs 1B and 6B in durum wheat (figure. 1e). The number and physical location ... 6B chromosome probably experienced an inverted pericen-.

  5. Materials Performance in USC Steam

    Energy Technology Data Exchange (ETDEWEB)

    G. R. Holcomb, P. Wang, P. D. Jablonski, and J. A. Hawk

    2010-05-01

    The proposed steam inlet temperature in the Advanced Ultra Supercritical (A-USC) steam turbine is high enough (760 °C) that traditional turbine casing and valve body materials such as ferritic/martensitic steels will not suffice due to temperature limitations of this class of materials. Cast versions of several traditionally wrought Ni-based superalloys were evaluated for use as casing or valve components for the next generation of industrial steam turbines. The full size castings are substantial: 2-5,000 kg each half and on the order of 100 cm thick. Experimental castings were quite a bit smaller, but section size was retained and cooling rate controlled to produce equivalent microstructures. A multi-step homogenization heat treatment was developed to better deploy the alloy constituents. The most successful of these cast alloys in terms of creep strength (Haynes 263, Haynes 282, and Nimonic 105) were subsequently evaluated by characterizing their microstructure as well as their steam oxidation resistance (at 760 and 800 °C).

  6. Cast Alloys for Advanced Ultra Supercritical Steam Turbines

    Energy Technology Data Exchange (ETDEWEB)

    G. R. Holcomb, P. Wang, P. D. Jablonski, and J. A. Hawk,

    2010-05-01

    The proposed steam inlet temperature in the Advanced Ultra Supercritical (A-USC) steam turbine is high enough (760 °C) that traditional turbine casing and valve body materials such as ferritic/martensitic steels will not suffice due to temperature limitations of this class of materials. Cast versions of several traditionally wrought Ni-based superalloys were evaluated for use as casing or valve components for the next generation of industrial steam turbines. The full size castings are substantial: 2-5,000 kg each half and on the order of 100 cm thick. Experimental castings were quite a bit smaller, but section size was retained and cooling rate controlled to produce equivalent microstructures. A multi-step homogenization heat treatment was developed to better deploy the alloy constituents. The most successful of these cast alloys in terms of creep strength (Haynes 263, Haynes 282, and Nimonic 105) were subsequently evaluated by characterizing their microstructure as well as their steam oxidation resistance (at 760 and 800 °C).

  7. Corrosion of high Ni-Cr alloys and Type 304L stainless steel in HNO3-HF

    International Nuclear Information System (INIS)

    Ondrejcin, R.S.; McLaughlin, B.D.

    1980-04-01

    Nineteen alloys were evaluated as possible materials of construction for steam heating coils, the dissolver vessel, and the off-gas system of proposed facilities to process thorium and uranium fuels. Commercially available alloys were found that are satisfactory for all applications. With thorium fuel, which requires HNO 3 -HF for dissolution, the best alloy for service at 130 0 C when complexing agents for fluoride are used is Inconel 690; with no complexing agents at 130 0 C, Inconel 671 is best. At 95 0 C, six other alloys tested would be adequate: Haynes 25, Ferralium, Inconel 625, Type 304L stainless steel, Incoloy 825, and Haynes 20 (in order of decreasing preference); based on composition, six untested alloys would also be adequate. The ions most effective in reducing fluoride corrosion were the complexing agents Zr 4+ and Th 4+ ; Al 3+ was less effective. With uranium fuel, modestly priced Type 304L stainless steel is adequate. Corrosion will be most severe in HNO 3 -HF used occasionally for flushing and in solutions of HNO 3 and corrosion products (ferric and dichromate ions). HF corrosion can be minimized by complexing the fluoride ion and by passivation of the steel with strong nitric acid. Corrosion caused by corrosion products can be minimized by operating at lower temperatures

  8. Associação micorízica em espécies arbóreas, atividade microbiana e fertilidade do solo em áreas degradadas de cerrado

    Directory of Open Access Journals (Sweden)

    Márcia Helena Scabora

    2011-01-01

    growth, where 50 mL of preserved cerrado soil was applied as inoculum of microorganisms. Seedlings of 11 tree species were planted: Anadenanthera falcata (Benth. Speg ('angico-preto', Acacia polyphylla D.C. ('monjoleiro', Stryphnodendron adstringens (Mart. Coville ('barbatimão', Dimorphandra mollis Benth ('faveiro', Hymenaea stigonocarpa Mart. ex Hayne ('jatobá-de-cerrado', Dipteryx alata Vog. ('baru', Machaerium acutifolium Vogel ('jacarandá- do-campo', Schinus terebinthifolia Raddi ('aroeirapimenteira', Magonia pubescens St. Hil. ('tingui', Lafoensia pacari St. Hil. ('dedaleira' and Tabebuia aurea (Manso Benth. & Hook ('ipê-amarelo'. Twelve months later, root samples were colleted at the depth of 0-0.10 m and used for evaluations. The subsoil, as compared to pasture soil, was poor in organic matter and presented less microbial activity. The highest mycorrhizal colonization was seen in the species Acacia polyphylla D.C. (monjoleiro, Magonia pubescens St. Hil. (tingui, Hymenaea stigonocarpa Mart. ex Hayne (jatobá-de-cerrado and Schinus terebinthifolia Raddi (aroeira-pimenteira. These species could be indicated in revegetation projects in 'cerrado' degraded areas. Plants from both areas showed seedlings form high mycorrhizal colonization and low numbers of spores.

  9. High temperature corrosion of nickel alloys by molten calcium chloride in an oxidising environment

    International Nuclear Information System (INIS)

    Barnett, Roger; Gittos, Mike

    2012-09-01

    A series of nickel alloys was submerged in molten calcium chloride (a molten salt proposed for and used in the nuclear industry for a variety of applications), at 850 deg. C for 72 hours under an oxidising environment. The samples were analysed in detail, in order to determine their corrosion behaviour and suitability for use under these conditions. 310 stainless steel was used as a reference material. Extensive corrosion occurred and the observed attack on the metal substrates was general and massive with corrosion rates ranging from 1.17 mm/year, for Haynes 214, to 13.3 mm/year, for 310 stainless steel. All materials showed selective leaching of chromium from the samples but the oxide layer formed was not protective, spalling away easily. The severity of the attack was not immediately visible from the corrosion rate alone: samples showed a friable scale on the surface and deep penetration of the attack beneath, up to 0.63 mm for 310 stainless steel. In some cases, the attack was clearly intergranular with chromium being depleted along the grain boundaries, whereas in others, the attack was more general. No simple correlation between alloying elements and corrosion rate was apparent, with additions of aluminium and silicon appearing to have little or no protective effect. Alloys 600 and Haynes HR-160 showed promise, with relatively low corrosion rates and penetration depths. (authors)

  10. Thermomechanical behavior of different Ni-base superalloys during cyclic loading at elevated temperatures

    Directory of Open Access Journals (Sweden)

    Huber Daniel

    2014-01-01

    Full Text Available The material behavior of three Ni-base superalloys (Inconel® 718, Allvac® 718PlusTM and Haynes® 282® during in-phase cyclic mechanical and thermal loading was investigated. Stress controlled thermo-mechanical tests were carried out at temperatures above 700 ∘C and different levels of maximum compressive stress using a Gleeble® 3800 testing system. Microstructure investigations via light optical microscopy (LOM and field emission gun scanning electron microscopy (FEG-SEM as well as numerical precipitation kinetics simulations were performed to interpret the obtained results. For all alloys, the predominant deformation mechanism during deformation up to low plastic strains was identified as dislocation creep. The main softening mechanism causing progressive increase of plastic strain after preceding linear behavior is suggested to be recrystallization facilitated by coarsening of grain boundary precipitates. Furthermore, coarsening and partial transformation of strengthening phases was observed. At all stress levels, Haynes® 282® showed best performance which is attributable to its stable microstructure containing a high phase fraction of small, intermetallic precipitates inside grains and different carbides evenly distributed along grain boundaries.

  11. S100A4-neutralizing antibody suppresses spontaneous tumor progression, pre-metastatic niche formation and alters T-cell polarization balance

    DEFF Research Database (Denmark)

    Grum-Schwensen, Birgitte; Klingelhöfer, Jörg; Beck, Mette

    2015-01-01

    , decreased vessel density and inhibition of metastases. CONCLUSION: The S100A4 blocking antibody (6B12) reduces tumor growth and metastasis in a model of spontaneous breast cancer. The 6B12 antibody treatment inhibits T cell accumulation at the primary and pre-metastatic tumor sites. The 6B12 antibody acts...

  12. Development of high-power CO2 lasers and laser material processing

    Science.gov (United States)

    Nath, Ashish K.; Choudhary, Praveen; Kumar, Manoj; Kaul, R.

    2000-02-01

    Scaling laws to determine the physical dimensions of the active medium and optical resonator parameters for designing convective cooled CO2 lasers have been established. High power CW CO2 lasers upto 5 kW output power and a high repetition rate TEA CO2 laser of 500 Hz and 500 W average power incorporated with a novel scheme for uniform UV pre- ionization have been developed for material processing applications. Technical viability of laser processing of several engineering components, for example laser surface hardening of fine teeth of files, laser welding of martensitic steel shroud and titanium alloy under-strap of turbine, laser cladding of Ni super-alloy with stellite for refurbishing turbine blades were established using these lasers. Laser alloying of pre-placed SiC coating on different types of aluminum alloy, commercially pure titanium and Ti-6Al-4V alloy, and laser curing of thermosetting powder coating have been also studied. Development of these lasers and results of some of the processing studies are briefly presented here.

  13. Production and Characterization of WC-Reinforced Co-Based Superalloy Matrix Composites

    Science.gov (United States)

    Özgün, Özgür; Dinler, İlyas

    2018-05-01

    Cobalt-based superalloy matrix composite materials were produced through the powder metallurgy technique using element powders at high purity and nano-sized wolfram carbide (WC) reinforcement in this study. An alloy that had the same chemical composition as the Stellite 6 alloy but not containing carbon was selected as the matrix alloy. The powder mixtures obtained as a result of mixing WC reinforcing member and element powders at the determined ratio were shaped by applying 300 MPa of pressure. The green components were sintered under argon atmosphere at 1240 °C for 120 minutes. The densities of the sintered components were determined by the Archimedes' principle. Microstructural characterization was performed via X-ray diffraction analysis, scanning electron microscope examinations, and energy-dispersive spectrometry. Hardness measurements and tensile tests were performed for determining mechanical characteristics. The relative density values of the sintered components increased by increasing the WC reinforcement ratio and they could almost reach the theoretical density. It was determined from the microstructural examinations that the composite materials consisted of fine and equiaxed grains and coarse carbides demonstrating a homogeneous dispersion along the microstructure at the grain boundaries. As it was the case in the density values, the hardness and strength values of the composites increased by increasing the WC ratio.

  14. Stem thrust prediction model for W-K-M double wedge parallel expanding gate valves

    Energy Technology Data Exchange (ETDEWEB)

    Eldiwany, B.; Alvarez, P.D. [Kalsi Engineering Inc., Sugar Land, TX (United States); Wolfe, K. [Electric Power Research Institute, Palo Alto, CA (United States)

    1996-12-01

    An analytical model for determining the required valve stem thrust during opening and closing strokes of W-K-M parallel expanding gate valves was developed as part of the EPRI Motor-Operated Valve Performance Prediction Methodology (EPRI MOV PPM) Program. The model was validated against measured stem thrust data obtained from in-situ testing of three W-K-M valves. Model predictions show favorable, bounding agreement with the measured data for valves with Stellite 6 hardfacing on the disks and seat rings for water flow in the preferred flow direction (gate downstream). The maximum required thrust to open and to close the valve (excluding wedging and unwedging forces) occurs at a slightly open position and not at the fully closed position. In the nonpreferred flow direction, the model shows that premature wedging can occur during {Delta}P closure strokes even when the coefficients of friction at different sliding surfaces are within the typical range. This paper summarizes the model description and comparison against test data.

  15. Microanalysis of tool steel and glass with laser-induced breakdown spectroscopy

    Science.gov (United States)

    Loebe, Klaus; Uhl, Arnold; Lucht, Hartmut

    2003-10-01

    A laser microscope system for the microanalytical characterization of complex materials is described. The universal measuring principle of laser-induced breakdown spectroscopy (LIBS) in combination with echelle optics permits a fast simultaneous multielement analysis with a possible spatial resolution below 10 pm. The developed system features completely UV-transparent optics for the laser-microscope coupling and the emission beam path and enables parallel signal detection within the wavelength range of 200-800 nm with a spectral resolution of a few picometers. Investigations of glass defects and tool steels were performed. The characterization of a glass defect in a tumbler by a micro-LIBS line scan, with use of a 266-nm diode-pumped Nd:YAG laser for excitation, is possible by simple comparison of plasma spectra of the defect and the surrounding area. Variations in the main elemental composition as well as impurities by trace elements are detected at the same time. Through measurement of the calibration samples with the known concentration of the corresponding element, a correlation between the intensity of spectral lines and the element concentration was also achieved. The change of elemental composition at the transient stellite solder of tool steels has been determined by an area scan. The two-dimensional pictures show abrupt changes of the element distribution along the solder edge and allow fundamental researches of dynamic modifications (e.g., diffusion) in steel.

  16. Radiation buildup and control in BWR recirculation piping

    International Nuclear Information System (INIS)

    Meyer, W.; Wood, R.M.; Rao, T.V.; Vook, R.W.

    1987-01-01

    Boiling water nuclear reactors (BWRs) employ stainless steel (Types 304 or 316 NG) pipes in which high-purity water at temperatures of ∼ 275 0 C are circulated. Various components of the system, such as valves and bearings, often contain hard facing metal alloys such as Stellite-6. These components, along with the stainless steel tubing and feedwater, serve as sources of 59 Co. This cobalt, along with other soluble and insoluble impurities, is carried along with the circulating water to the reactor core where it is converted to radioactive 60 Co. After reentering the circulating water, the 60 Co can be incorporated into a complex corrosion layer in the form of CoCr 2 O 4 and/or CoFe 2 O 4 . The presence of even small amounts of 60 Co on the walls of BWR cooling systems is the dominant contributor to inplant radiation levels. Thus BWR owners and their agents are expending significant time and resources in efforts to reduce both the rate and amount of 60 Co buildup. The object of this research is twofold: (a) to form a thin diffusion barrier against the outward migration of cobalt from a cobalt-containing surface and (b) to prevent the growth of a 60 Co-containing corrosion film. The latter goal was the more important since most of the radioactive cobalt will originate from sources other than the stainless steel piping itself

  17. VERTICAL ACCURACY COMPARISON OF DIGITAL ELEVATION MODEL FROM LIDAR AND MULTITEMPORAL SATELLITE IMAGERY

    Directory of Open Access Journals (Sweden)

    J. Octariady

    2017-05-01

    Full Text Available Digital elevation model serves to illustrate the appearance of the earth's surface. DEM can be produced from a wide variety of data sources including from radar data, LiDAR data, and stereo satellite imagery. Making the LiDAR DEM conducted using point cloud data from LiDAR sensor. Making a DEM from stereo satellite imagery can be done using same temporal or multitemporal stereo satellite imagery. How much the accuracy of DEM generated from multitemporal stereo stellite imagery and LiDAR data is not known with certainty. The study was conducted using LiDAR DEM data and multitemporal stereo satellite imagery DEM. Multitemporal stereo satellite imagery generated semi-automatically by using 3 scene stereo satellite imagery with acquisition 2013–2014. The high value given each of DEM serve as the basis for calculating high accuracy DEM respectively. The results showed the high value differences in the fraction of the meter between LiDAR DEM and multitemporal stereo satellite imagery DEM.

  18. Effect of heat treatment on the microstructure of Co-Cr-W alloy fabricated by laser additive manufacturing

    Science.gov (United States)

    Ren, Bo; Chen, Changjun; Zhang, Min

    2018-04-01

    Stellite 6 cobalt-based alloy powder was used to produce Co-Cr-W alloy using laser additive manufacturing technology, and then different heat treatment strategies were carried out on the deposited sample. The characteristics of microstructure under different heat treatment conditions were investigated using scanning electron microscopy with energy dispersive spectroscopy, transmission electron microscope, and x-ray diffraction. The results show that the as-deposited sample has few cracks or pores, and the microstructure is typical dendritic structure, and lamellar eutectic carbides are rich in Cr in interdendritic. The matrix mainly consists of γ phases and a few ɛ phases. Some γ phases transform into ɛ phases after 900°C/6 h aging treatment and lamellar eutectic carbides transform into blocky carbides presenting as a network, most of the carbides are rich in Cr and a few are rich in W. When heat treated at 1200°C/1 h followed by water cooling and then treated at 900°C/6 h followed by furnace cooling, it can be found that some γ phases transform into ɛ phases. The carbides transform into elliptical M23C6 carbides that are rich in Cr with the size of 1 to 3 μm and a part of W-rich carbides.

  19. Hardfacing and packings for improved valve performance

    International Nuclear Information System (INIS)

    Aikin, J.A.; Patrick, J.N.F.; Inglis, I.

    2003-01-01

    The CANDU Owners Group (COG), Chemistry, Materials and Components (CMC) Program has supported an ongoing program on valve maintenance and performance for several years. An overview is presented of recent work on iron-based hardfacing, packing qualification, friction testing of polytetrafluoroethylene (PTFE) packings, and an investigation of re-torquing valve packing. Based on this program, two new valve-packing materials have been qualified for use in CANDU stations. By doing this, CANDU maintenance can avoid having only one packing qualified for station use, as well as assess the potential impact of the industry trend towards using lower gland loads. The results from corrosion tests by AECL and the coefficient of friction studies at Battelle' s tribology testing facilities on Delcrome 910, an iron-based hardfacing alloy, indicate it is an acceptable replacement for Stellite 6 under certain conditions. This information can be used to update in-line valve purchasing specifications. The renewed interest in friction characteristics, and environmental qualification (EQ) of packing containing PTFE has resulted in a new test program in these areas. The COG-funded valve programs have resulted in modifications to design specifications for nuclear station in-line valves and have led to better maintenance practices and valve reliability. In the end, this means lower costs and cheaper electricity. (author)

  20. Overall strategy of Creys Malville power station dismantling

    International Nuclear Information System (INIS)

    Alphonse, P.

    2002-01-01

    The power station was stopped by a government decision following the elections in 1997. This shutdown was then made official by a letter dated April 1998 and the decree of December 1998. This was a non-technical shutdown and as such had not been envisaged; there has been no early warning. Current dismantling strategy: The studies leading to shutdown and then dismantling were engaged in 1998 based on a scenario with a status corresponding to IAEA level 2 until 2046. In 2001, EDF management made the decision to dismantle all the first generation power stations and Creys Malville between now and 2025. It should be noted that the presence of strongly irradiated stellite in the Creys Malville reactor would still require remote systems for working in the reactor block after 2046. The sequence of operations dictated by the dismantling strategy is as follows: eliminate the risks as soon as possible and in particular the risk related to the sodium, 3300 tonnes of which is kept in liquid form in the reactor vessel; dismantle the most active parts which are too radioactive to be sent to the existing or planned storage centres. This may lead to on-site storage to allow decay to occur before sending to a storage centre; planning of the work interventions in order to limit the costs

  1. An investigation of two-body abrasive wear of laser processed surfaces

    International Nuclear Information System (INIS)

    Abass, G.

    1995-01-01

    This paper reports two body abrasive wear studies of alloy and composite deposits produced with a 2 kW continuous wave CO/sub 2/ laser. Stellite alloy 6, Alloy 4815, Stainless steel and SiC powders were used to produce alloy and composite deposits on an En 3b mild steel substrate. The cladding material was injected into the laser produced melt pool by means of a pneumatic powder delivery system. In the present studies instead of using the conventional pin-on-disc method of wear measurement, a more realistic and practical wear testing procedure was adopted. The wear testing machine used was capable of measuring wear of three comparatively larger (30 x 30 x 10 mm) clad samples by abrading simultaneously against a revolving alumina disc. A comparative study of microstructure, hardness and wear of alloy and composite clads was made. The clad deposits were found sound and continuous. The hardness and wear resistance of the composites were markedly higher than that of the alloy clads. (author) 9 figs

  2. Engineer, design construct, test, and evaluate a pressurized fluidized-bed pilot plant using high-sulfur coal for production of electric power: Phase I. Preliminary engineering; Phase II. Final design; Phase III. Construction. Annual report, March 1, 1979-February 29, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The extended test program on the SGT/PFB Technology Unit, previously placed in operation, was completed. Total operating time is 3378 which includes 2681 h burning coal and 1205 h total turbine engine operation. Significant performance and operational milestones, completed during the past year, included: over 2000 h on candidate heat exchanger tube materials at design temperature during which durability of iron-base alloy for PFB heat exchanger tubes was demonstrated; generated electric power with gas turbine operating on PFB coal combustion gas for 1000 h with no appreciable erosion or corrosion of turbine rotor blades and stator vanes; evaluated and improved hot gas cleanup system during which mean particle size of 1.3 Microns and a loading of 0.054 grains/Scf was achieved; and durability of hot/ash solids lock hopper valves for over 1000 h without leakage and stellite coated butterfly gas valve operating successfully for over 900 h in a highly erosive environment was demonstrated. Details of materials evolutions and corrosion rates, component performances and gaseous emission levels are presented.

  3. Stem thrust prediction model for W-K-M double wedge parallel expanding gate valves

    International Nuclear Information System (INIS)

    Eldiwany, B.; Alvarez, P.D.; Wolfe, K.

    1996-01-01

    An analytical model for determining the required valve stem thrust during opening and closing strokes of W-K-M parallel expanding gate valves was developed as part of the EPRI Motor-Operated Valve Performance Prediction Methodology (EPRI MOV PPM) Program. The model was validated against measured stem thrust data obtained from in-situ testing of three W-K-M valves. Model predictions show favorable, bounding agreement with the measured data for valves with Stellite 6 hardfacing on the disks and seat rings for water flow in the preferred flow direction (gate downstream). The maximum required thrust to open and to close the valve (excluding wedging and unwedging forces) occurs at a slightly open position and not at the fully closed position. In the nonpreferred flow direction, the model shows that premature wedging can occur during ΔP closure strokes even when the coefficients of friction at different sliding surfaces are within the typical range. This paper summarizes the model description and comparison against test data

  4. Friction behavior of cobalt base and nickel base hardfacing materials in high temperature sodium

    International Nuclear Information System (INIS)

    Mizobuchi, Syotaro; Kano, Shigeki; Nakayama, Kohichi; Atsumo, Hideo

    1980-01-01

    A friction behavior of the hardfacing materials such as cobalt base alloy ''Stellite'' and nickel base alloy ''Colmonoy'' used in the sliding components of a sodium cooled fast breeder reactor was investigated in various sodium environments. Also, friction tests on these materials were carried out in argon environment. And they were compared with those in sodium environment. The results obtained are as follows: (1) In argon, the cobalt base hardfacing alloy showed better friction behavior than the nickel base hardfacing alloy. In sodium, the latter was observed to have the better friction behavior being independent of the sodium temperature. (2) The friction coefficient of each material tends to become lower by pre-exposure in sodium. Particularly, this tendency was remarkable for the nickel base hardfacing alloy. (3) The friction coefficient between SUS 316 and one of these hardfacing materials was higher than that between latter materials. Also, some elements of hardfacing alloys were recognized to transfer on the friction surface of SUS 316 material. (4) It was observed that each tested material has a greater friction coefficient with a decrease of the oxygen content in sodium. (author)

  5. Wear of rolling element bearings in sodium

    International Nuclear Information System (INIS)

    Campbell, C.S.

    1976-01-01

    Rolling element bearings and related mechanisms are attractive for service in liquid sodium but it is not clear what minimum wear rate can be anticipated. For axially loaded angular contact bearings rotation is incompatible with pure rolling on both races and wear arises from the resulting ball spin. The initial pressure distributions and sizes of the contact ellipses can be calculated but will change with bearing wear. However, the most effective distribution for producing wear would be for the full loads to be borne on the tips of the contact areas, whose maximum length is given by examination of the race wear tracks. A calculation on such a basis should set a lower limit for the wear coefficient. Both the torque and instantaneous wear rate of a bearing will be similar functions of the integral over the contact areas of the product of contact pressure and radius from the ball spin axis. A better estimate of wear coefficient should be obtained by relating the average torque, the average wear, the initial torque and the initial wear where the conditions are known. Analysis of tests in sodium at 400 0 C of high speed steel and Stellite bearings by these methods indicates specific wear rates of the order of 10 -15 m 3 /N-m, not unduly out of line with the range of values found in conventional sliding tests

  6. Canned motor pumps at Heavy Water Project, Baroda [Paper No.: II-2

    International Nuclear Information System (INIS)

    Batra, R.K.; Waishampayan, S.G.

    1981-01-01

    Heavy Water Project, Baroda is having special canned motor pumps for pumping ammonia and potassium amide. These pumps work under a pressure of 640 kg/cm 2 and are lubricated and cooled by the same fluid. These pumps are having special bearings consisting of mating surfaces of tungsten carbine Vs ceramic or stellite Vs carbon depending upon application. The total number of such pumps installed in the plant is around 52. These pumps being installed in high pressure vessels working at a pressure of 640 kg/cm 2 have special maintenance problems and need special care during maintenance. Pumps once boxed up are completely out of reach for immediate maintenance if needed. The failure of these pumps may mean a down time of one to two months for the plant. Besides above, there are multistage barrel type ammonia pumps with 24 stages developing a pressure of 140 kg/cm 2 . All these equipments need special maintenance methods as the problems faced are varied and difficult to solve. This paper deals with general and unique type of problems faced on these pumps. (author)

  7. PRE-ELECTIONAL DECREASE OF THE UNEMPLOYMENT RATE

    Directory of Open Access Journals (Sweden)

    Damjan Miličević

    2013-02-01

    Full Text Available Opportunistic business cycle models test whether the current government has the ability to reduce unemployment in pre-election period. First opportunistic business cycle models tested regressions using unemployment rate as the dependent variable, and for explanatory variables used unemployment rate in the previous two periods and political dummy variable defined as unity several quarters prior to election and zero elsewhere. Such models did not find evidence of opportunistic cycle for unemployment. Haynes and Stone in their model estimated regressions using unemployment as the dependent variable and sixteen dummy variables as explanatory variables (one for each quarter in the Presidential electoral term. Results showed that unemployment has roughly sinusoidal sixteen quarter cycle, where unemployment troughs on average the quarter of the election. Mentioned models are tested with data for the United States for the period from 1948 to 2011 where regressions results coincide with models mentioned in the article.

  8. Radial basis functions in mathematical modelling of flow boiling in minichannels

    Directory of Open Access Journals (Sweden)

    Hożejowska Sylwia

    2017-01-01

    Full Text Available The paper addresses heat transfer processes in flow boiling in a vertical minichannel of 1.7 mm depth with a smooth heated surface contacting fluid. The heated element for FC-72 flowing in a minichannel was a 0.45 mm thick plate made of Haynes-230 alloy. An infrared camera positioned opposite the central, axially symmetric part of the channel measured the plate temperature. K-type thermocouples and pressure converters were installed at the inlet and outlet of the minichannel. In the study radial basis functions were used to solve a problem concerning heat transfer in a heated plate supplied with the controlled direct current. According to the model assumptions, the problem is treated as twodimensional and governed by the Poisson equation. The aim of the study lies in determining the temperature field and the heat transfer coefficient. The results were verified by comparing them with those obtained by the Trefftz method.

  9. Hardness optimization of boride diffusion layer on Astm F-75 alloy using response surface methodology

    Energy Technology Data Exchange (ETDEWEB)

    Arguelles O, J. L.; Corona R, M. A. [Universidad Autonoma de San Luis Potosi, Doctorado Institucional en Ingenieria y Ciencia de Materiales, San Luis Potosi 78000, SLP (Mexico); Marquez H, A.; Saldana R, A. L.; Saldana R, A. [Universidad de Guanajuato, Ingenieria Mecanica Agricola DICIVA, Irapuato, Guanajuato 36500 (Mexico); Moreno P, J., E-mail: amarquez@ugto.mx [Universidad de Guanajuato, Departamento de Minas, Metalurgia y Geologia, Ex-Hacienda San Matias s/n, Guanajuato, Guanajuato 36020 (Mexico)

    2017-11-01

    In this study, the Response Surface Methodology (Rsm) and Central Composite Design (Ccd) were used to optimize the hardness of boride diffusion layer on Astm F-75 alloy (also called Haynes alloy). A boronizing thermochemical treatment was carried out at different temperatures and for different time periods. Hardness tests were conducted. The boride diffusion layer was verified by the X-ray diffraction (XRD) analysis indicating the formation of Co B, Co{sub 2}B, Cr B and Mo{sub 2}B phases. An optimal hardness of 3139.7 Hv was obtained for the samples subjected to the boriding process for a duration of 6.86 h at 802.4 degrees Celsius. (Author)

  10. Optical properties of Pyromark 2500 coatings of variable thicknesses on a range of materials for concentrating solar thermal applications

    Science.gov (United States)

    Coventry, Joe; Burge, Patrick

    2017-06-01

    In this paper we present the results of solar absorptance measurements of four metallic substrate materials, either coated with Pyromark 2500 at various thicknesses, or uncoated and oxidised. Absorptance is measured prior to aging, and during and after aging at three elevated temperatures. In many cases, thin coatings perform as well, or better than thick coatings and do not appear to have a higher rate of failure. However, a thicker coating did show an advantage after aging at the highest temperature tested (850°C), and it is expected that with longer exposure, similar trends may emerge for the 600°C and 750°C aging cases. Another finding is that the two nickel-based alloys tested, Haynes 230 and Inconel 625, both formed an oxide with very good absorptance, although durability requires further testing.

  11. Microstructural evolutions and mechanical behaviour of the nickel based alloys 617 and 230 at high temperature

    International Nuclear Information System (INIS)

    Chomette, S.

    2009-11-01

    High Temperature Reactors (HTR), is one of the innovative nuclear reactor designed to be inherently safer than previous generation and to produce minimal waste. The most critical metallic component in that type of reactor is the Intermediate Heat exchanger (IHX). The constraints imposed by the conception and the severe operational conditions (high temperature of 850 C to 950 C, lifetime of 20,000 h) have guided the IHX material selection toward two solid solution nickel base alloys, the Inconel 617 and the Haynes 230. Inconel 617 is the primary candidate alloy thanks to its good high temperature mechanical and corrosion properties and the large data base developed in previous programs. However, its high cobalt content has to be considered as an issue (nuclear activation). The more recent alloy Haynes 230, in which most of the cobalt has been replaced by tungsten, present characteristics similar to the 617 alloy. The objective of this thesis is to study the high temperature mechanical behaviour of both alloys in relation with their microstructural evolutions. The as received microstructural observations have revealed primary carbides (M 6 C). Most of this precipitates are evenly distributed in the materials. Few M 23 C 6 secondary carbides are observed in both alloys in the as received state. Thermal ageing treatments at 850 C lead to an important M 23 C 6 precipitation on slip lines and at grain boundaries. The size of this carbides increases and their number decreases with increasing ageing duration. The intragranular precipitation of secondary carbides at 950 C is more limited and the intergranular evolution more important than at 850 C. The microstructural observations and the hardness evolution of both alloys show that the main microstructural evolutions occur before 1,000 h at both studied temperatures. The mechanical properties of the Inconel 617 and the Haynes 230 have been studied using tensile, creep, fatigue and relaxation-fatigue tests. Particularly, the

  12. High temperature coatings from post processing Fe-based chips and Ni-based alloys as a solution for critical raw materials

    Science.gov (United States)

    Dudziak, T.; Olbrycht, A.; Polkowska, A.; Boron, L.; Skierski, P.; Wypych, A.; Ambroziak, A.; Krezel, A.

    2018-03-01

    Due to shortage of natural resources worldwide, it is a need to develop innovative technologies, to save natural resources and secure Critical Raw Materials (CRM). On the other hand, these new technologies should move forward materials engineering in order to develop better materials for extreme conditions. One way to develop new materials is to use post processing chips of austenitic steels (i.e. 304L stainless steel: 18/10 Cr/Ni) and other materials such as Ni-based alloy with high Cr content. In this work, the results of the preliminary study on the High Velocity Oxy Fuel (HVOF) coatings developed from 304L stainless steel chips and Haynes® 282® Ni- based alloys are shown. The study obeys development of the powder for HVOF technology. The produced coatings were exposed at high temperature at 500 and 700 °C for 100 and 300 hours respectively to assess corrosion behaviour.

  13. Fabrication of three 2500-watt (thermal) strontium-90 heat sources

    International Nuclear Information System (INIS)

    DeVore, J.R.; Haff, K.W.; Tompkins, J.A.

    1986-08-01

    Three 2500-watt (thermal) heat sources were fabricated by the Oak Ridge National Laboratory (ORNL) for the purpose of fueling a 500-watt (electric) thermoelectric generator as part of the US Department of Energy's Byproducts Utilization Program (BUP). Each of the sources, which are the largest ever assembled, consist of hot-pressed pellets of 90 Sr fluoride, doubly encapsulated in three Haynes-25 inner capsules and in a Hastelloy-S outer capsule. The total 90 Sr inventory of all three sources is 1.12 million curies. The sources were fabricated at the ORNL Fission Product Development Laboratory (FPDL), which is a facility that is capable of processing multi-megacurie quantities of radioactive materials, chiefly 137 Cs and 90 Sr. The source was tested to determine compliance with all of the IAEA Safety Series No. 33 requirements. The source fabrication, assembly, and testing are described in the presentation

  14. A statistical solution for survival curves in photobiology

    International Nuclear Information System (INIS)

    Chen, L.C.

    1981-01-01

    The mathematical model that includes the cellular repair mechanisms proposed by Haynes and modified by Pelico has been adjusted by Non-linear Least Squares Method and a computer program was also used. The parametric values obtained agreed with the graphic ones. This method has the advantage that one can obtain the parameters by a function fitting at all the experimental measurement, and also allows the determination of experimental errors. The studies performed on pre-starved cells without amino-acids and glucose show a greater photo-resistance for strains non mutated in uvr gene. This phenomenon appears to be dependent on functionality of this gene. A mathematical model was proposed to describe quantitatively the starvation effect in function of time. (Author) [pt

  15. STABILITY ANALYSIS OF RADIAL TURNING PROCESS FOR SUPERALLOYS

    Directory of Open Access Journals (Sweden)

    Alberto JIMÉNEZ

    2017-07-01

    Full Text Available Stability detection in machining processes is an essential component for the design of efficient machining processes. Automatic methods are able to determine when instability is happening and prevent possible machine failures. In this work a variety of methods are proposed for detecting stability anomalies based on the measured forces in the radial turning process of superalloys. Two different methods are proposed to determine instabilities. Each one is tested on real data obtained in the machining of Waspalloy, Haynes 282 and Inconel 718. Experimental data, in both Conventional and High Pressure Coolant (HPC environments, are set in four different states depending on materials grain size and Hard-ness (LGA, LGS, SGA and SGS. Results reveal that PCA method is useful for visualization of the process and detection of anomalies in online processes.

  16. Structural assessment of a space station solar dynamic heat receiver thermal energy storage canister

    Science.gov (United States)

    Thompson, R. L.; Kerslake, T. W.; Tong, M. T.

    1988-01-01

    The structural performance of a space station thermal energy storage (TES) canister subject to orbital solar flux variation and engine cold start up operating conditions was assessed. The impact of working fluid temperature and salt-void distribution on the canister structure are assessed. Both analytical and experimental studies were conducted to determine the temperature distribution of the canister. Subsequent finite element structural analyses of the canister were performed using both analytically and experimentally obtained temperatures. The Arrhenius creep law was incorporated into the procedure, using secondary creep data for the canister material, Haynes 188 alloy. The predicted cyclic creep strain accumulations at the hot spot were used to assess the structural performance of the canister. In addition, the structural performance of the canister based on the analytically determined temperature was compared with that based on the experimentally measured temperature data.

  17. Biaxial Creep Specimen Fabrication

    International Nuclear Information System (INIS)

    JL Bump; RF Luther

    2006-01-01

    This report documents the results of the weld development and abbreviated weld qualification efforts performed by Pacific Northwest National Laboratory (PNNL) for refractory metal and superalloy biaxial creep specimens. Biaxial creep specimens were to be assembled, electron beam welded, laser-seal welded, and pressurized at PNNL for both in-pile (JOYO reactor, O-arai, Japan) and out-of-pile creep testing. The objective of this test campaign was to evaluate the creep behavior of primary cladding and structural alloys under consideration for the Prometheus space reactor. PNNL successfully developed electron beam weld parameters for six of these materials prior to the termination of the Naval Reactors program effort to deliver a space reactor for Project Prometheus. These materials were FS-85, ASTAR-811C, T-111, Alloy 617, Haynes 230, and Nirnonic PE16. Early termination of the NR space program precluded the development of laser welding parameters for post-pressurization seal weldments

  18. Laser Cutting of Materials of Various Thicknesses

    Directory of Open Access Journals (Sweden)

    Martin Grepl

    2012-01-01

    Full Text Available Thise paper deals with the application of laser technology and optimizing the parameters for cutting nickel alloy. The theoretical part of the paper describes various types of lasers, their principles and usage. The experimental part focuses on optimizing the section parameteres of Haynes 718 alloy using a CO2 gas laser. This alloy is employed in the production of components for the aircraft industry. The experiment was performed on the Wibro Delta laser system designed for sizable parts. The actual section is measured with respect to its quality and any accompanying side effects that occur during the process. In this case, laser output and cutting speed were the parameters with most influence on the final cut. The summary explains the results achieved in a metallographic laboratory.

  19. Corrosion studies and recommendation of alloys for an incinerator of glove-boxes wastes

    International Nuclear Information System (INIS)

    Devisme, F.; Garnier, M.H.

    1992-01-01

    In the framework of the development of an incineration process for high chlorinated wastes, commercial alloys have been investigated by means of parametric laboratory tests in HCl containing gas mixtures and also in field tests. Recommendations may be formulated for the three main components i.e. pyrolyser, calciner and cooler. In very low oxygen-potential atmospheres, the alloys Hastelloy C276 and Inconel 625 present the best behaviours. For the calciner, alloy Inconel 601 is more satisfactory than AISI 310 steel. As for the cooler, only the alloy Haynes 214 appears acceptable at 1100 deg C. Because of the very low stress level affecting the components, thermomechanical properties do not modify these recommendations based on corrosion behaviour

  20. High temperature materials for radioactive waste incineration and vitrification. Revision 1

    International Nuclear Information System (INIS)

    Bickford, D.F.; Ondrejcin, R.S.; Salley, L.

    1986-01-01

    Incineration or vitrification of radioactive waste subjects equipment to alkaline or acidic fluxing, oxidation, sulfidation, carburization, and thermal shock. It is necessary to select appropriate materials of construction and control operating conditions to avoid rapid equipment failure. Nickel- and cobalt-based alloys with high chromium or aluminum content and aluminum oxide/chromium oxide refractories with high chromium oxide content have provided the best service in pilot-scale melter tests. Inconel 690 and Monofrax K-3 are being used for waste vitrification. Haynes 188 and high alumina refractory are undergoing pilot scale tests for incineration equipment. Laboratory tests indicate that alloys and refractories containing still higher concentrations of chromium or chromium oxide, such as Inconel 671 and Monofrax E, may provide superior resistance to attack in glass melter environments

  1. Biaxial Creep Specimen Fabrication

    Energy Technology Data Exchange (ETDEWEB)

    JL Bump; RF Luther

    2006-02-09

    This report documents the results of the weld development and abbreviated weld qualification efforts performed by Pacific Northwest National Laboratory (PNNL) for refractory metal and superalloy biaxial creep specimens. Biaxial creep specimens were to be assembled, electron beam welded, laser-seal welded, and pressurized at PNNL for both in-pile (JOYO reactor, O-arai, Japan) and out-of-pile creep testing. The objective of this test campaign was to evaluate the creep behavior of primary cladding and structural alloys under consideration for the Prometheus space reactor. PNNL successfully developed electron beam weld parameters for six of these materials prior to the termination of the Naval Reactors program effort to deliver a space reactor for Project Prometheus. These materials were FS-85, ASTAR-811C, T-111, Alloy 617, Haynes 230, and Nirnonic PE16. Early termination of the NR space program precluded the development of laser welding parameters for post-pressurization seal weldments.

  2. Design and Fabrication Technique of the Key Components for Very High Temperature Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ho Jin; Song, Ki Nam; Kim, Yong Wan

    2006-12-15

    The gas outlet temperature of Very High Temperature Reactor (VHTR) may be beyond the capability of conventional metallic materials. The requirement of the gas outlet temperature of 950 .deg. C will result in operating temperatures for metallic core components that will approach very high temperature on some cases. The materials that are capable of withstanding this temperature should be prepared, or nonmetallic materials will be required for limited components. The Ni-base alloys such as Alloy 617, Hastelloy X, XR, Incoloy 800H, and Haynes 230 are being investigated to apply them on components operated in high temperature. Currently available national and international codes and procedures are needed reviewed to design the components for HTGR/VHTR. Seven codes and procedures, including five ASME Codes and Code cases, one French code (RCC-MR), and on British Procedure (R5) were reviewed. The scope of the code and code cases needs to be expanded to include the materials with allowable temperatures of 950 .deg. C and higher. The selection of compact heat exchangers technology depends on the operating conditions such as pressure, flow rates, temperature, but also on other parameters such as fouling, corrosion, compactness, weight, maintenance and reliability. Welding, brazing, and diffusion bonding are considered proper joining processes for the heat exchanger operating in the high temperature and high pressure conditions without leakage. Because VHTRs require high temperature operations, various controlled materials, thick vessels, dissimilar metal joints, and precise controls of microstructure in weldment, the more advanced joining processes are needed than PWRs. The improved solid joining techniques are considered for the IHX fabrication. The weldability for Alloy 617 and Haynes 230 using GTAW and SMAW processes was investigated by CEA.

  3. Structural analysis of a reflux pool-boiler solar receiver

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, E.L.; Stone, C.M.

    1991-06-01

    Coupled thermal-structural finite element calculations of a reflux pool-boiler solar receiver were performed to characterize the operating stresses and to address issues affecting the service life of the receiver. Analyses performed using shell elements provided information for receiver material selection and design optimization. Calculations based on linear elastic fracture mechanics principles were performed using continuum elements to assess the vulnerability of a seam-weld to fatigue crack growth. All calculations were performed using ABAQUS, a general purpose finite element code, and elements specifically formulated for coupled thermal-structural analysis. Two materials were evaluated: 316L SS and Haynes 230 alloys. The receiver response was simulated for a combination of structural and thermal loads that represent the startup and operating conditions of the receiver. For both materials, maximum stresses in the receiver developed shortly after startup due to uneven temperature distribution across the receiver surface. The largest effective stress was near yield in the 316L SS receiver and below 39 percent of yield in the Haynes 230 receiver. The calculations demonstrated that stress reductions of over 25 percent could be obtained by reducing the aft dome thickness to one closer to the absorber. The fatigue calculations demonstrated that the stress distribution near the seam-weld notch depends primarily on the structural load created by internal pressurization of the receiver rather than the thermal, indicating that the thermal loads can be neglected when assessing the stress intensity near the seam-weld notch. The stress intensity factor, computed using the J-integral method and crack opening-displacement field equations, was significantly below the fatigue threshold for most steels. The calculations indicated that the weld notch was always loaded in compression, a condition which is not conducive to fatigue crack growth. 15 refs., 30 figs., 3 tabs.

  4. Design and Fabrication Technique of the Key Components for Very High Temperature Reactor

    International Nuclear Information System (INIS)

    Lee, Ho Jin; Song, Ki Nam; Kim, Yong Wan

    2006-12-01

    The gas outlet temperature of Very High Temperature Reactor (VHTR) may be beyond the capability of conventional metallic materials. The requirement of the gas outlet temperature of 950 .deg. C will result in operating temperatures for metallic core components that will approach very high temperature on some cases. The materials that are capable of withstanding this temperature should be prepared, or nonmetallic materials will be required for limited components. The Ni-base alloys such as Alloy 617, Hastelloy X, XR, Incoloy 800H, and Haynes 230 are being investigated to apply them on components operated in high temperature. Currently available national and international codes and procedures are needed reviewed to design the components for HTGR/VHTR. Seven codes and procedures, including five ASME Codes and Code cases, one French code (RCC-MR), and on British Procedure (R5) were reviewed. The scope of the code and code cases needs to be expanded to include the materials with allowable temperatures of 950 .deg. C and higher. The selection of compact heat exchangers technology depends on the operating conditions such as pressure, flow rates, temperature, but also on other parameters such as fouling, corrosion, compactness, weight, maintenance and reliability. Welding, brazing, and diffusion bonding are considered proper joining processes for the heat exchanger operating in the high temperature and high pressure conditions without leakage. Because VHTRs require high temperature operations, various controlled materials, thick vessels, dissimilar metal joints, and precise controls of microstructure in weldment, the more advanced joining processes are needed than PWRs. The improved solid joining techniques are considered for the IHX fabrication. The weldability for Alloy 617 and Haynes 230 using GTAW and SMAW processes was investigated by CEA

  5. Selective discrimination of cyclodextrin diols using cyclic sulfates

    DEFF Research Database (Denmark)

    Petrillo, Marta; Marinescu, Lavinia; Rousseau, Cyril

    2009-01-01

    A method for selective monofunctionalition of readily available cyclodextrin diols (2(A-F),3(A-F),6(B,C,E,F)-hexadeca-O-benzyl-alpha-cyclodextrin and 2(A-G),3(A-G),6(B,C,E-G)-nonadeca-O-benzyl-beta-cyclodextrin) by regioselective nucleophilic opening of their cyclic sulfates is presented. Although...

  6. Identification of Novel Targets of the Human Cell Cycle Regulatory Protein Cdc34

    Science.gov (United States)

    1999-07-01

    centrifugal elutriation, with a purity of -80% as shown by micro - ethyl acetate and separated on thin-layer chromatography plates (Whatman, scopic...Spain. (2) Servicio Bioquimica, Hosp. La Paz. Madrid. ICER protein is elevated in mHR6b-/- (murine Rad6B) fibroblasts Spain. and in human cells

  7. Chlorinated Iridoid Glucosides from Veronica longifolia and their Antioxidant Activity

    DEFF Research Database (Denmark)

    Jensen, Søren Rosendal; Gotfredsen, Charlotte Held; Harput, U. Sebnem

    2010-01-01

    From Veronica longifolia were isolated three chlorinated iridoid glucosides, namely asystasioside E (6) and its 6-O-esters 6a and 6b, named longifoliosides A and B, respectively. The structures of 6a and 6b were proved by analysis of their spectroscopic data and by conversion to the catalpol ester...

  8. 77 FR 61460 - Self-Regulatory Organizations; NASDAQ OMX PHLX LLC; Notice of Filing and Immediate Effectiveness...

    Science.gov (United States)

    2012-10-09

    ... Section 6(b)(6) and 6(b)(7) of the Act,\\7\\\\\\ which require an exchange to provide fair procedures for the... promote the settlement of disciplinary cases by allowing members and member organizations to make... protracted disciplinary proceeding. Phlx further believes that affording members and member organizations...

  9. 78 FR 56939 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-IMS Global...

    Science.gov (United States)

    2013-09-16

    ..., Dell Inc., Austin, TX; Miami-Dade College--Virtual College, Miami, FL; National Labor College, Silver.... The Department of Justice published a notice in the Federal Register pursuant to Section 6(b) of the..., 2013. A notice was published in the Federal Register pursuant to Section 6(b) of the Act on June 21...

  10. 76 FR 72724 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-National Warheads...

    Science.gov (United States)

    2011-11-25

    .... Specifically, Accurate Munition Systems, Inc., Austin, TX; Excelitas Technologies Sensors, Inc., Miamisburg, OH... Department of Justice published a notice in the Federal Register pursuant to Section 6(b) of the Act on June... notice was published in the Federal Register pursuant to Section 6(b) of the Act on September 23, 2011...

  11. 77 FR 34067 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-National Warheads...

    Science.gov (United States)

    2012-06-08

    ..., 21 CT, Inc., Austin, TX; Cerebrus Corporation, Morris Plains, NJ; Conax Florida Corporation, St... Department of Justice published a notice in the Federal Register pursuant to Section 6(b) of the Act on June... notice was published in the Federal Register pursuant to Section 6(b) of the Act on March 15, 2012 (77 FR...

  12. 78 FR 37572 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-U.S. Photovoltaic...

    Science.gov (United States)

    2013-06-21

    ... circumstances. Specifically, Esgee Technologies, Inc., Austin, TX; and Magnolia Solar, Albany, NY, have been... Justice published a notice in the Federal Register pursuant to Section 6(b) of the Act on December 21... was published in the Federal Register pursuant to Section 6(b) of the Act on February 12, 2013 (78 FR...

  13. Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components

    International Nuclear Information System (INIS)

    Thivillon, L.; Bertrand, Ph.; Laget, B.; Smurov, I.

    2009-01-01

    Direct metal deposition (DMD) is an automated 3D deposition process arising from laser cladding technology with co-axial powder injection to refine or refurbish parts. Recently DMD has been extended to manufacture large-size near-net-shape components. When applied for manufacturing new parts (or their refinement), DMD can provide tailored thermal properties, high corrosion resistance, tailored tribology, multifunctional performance and cost savings due to smart material combinations. In repair (refurbishment) operations, DMD can be applied for parts with a wide variety of geometries and sizes. In contrast to the current tool repair techniques such as tungsten inert gas (TIG), metal inert gas (MIG) and plasma welding, laser cladding technology by DMD offers a well-controlled heat-treated zone due to the high energy density of the laser beam. In addition, this technology may be used for preventative maintenance and design changes/up-grading. One of the advantages of DMD is the possibility to build functionally graded coatings (from 1 mm thickness and higher) and 3D multi-material objects (for example, 100 mm-sized monolithic rectangular) in a single-step manufacturing cycle by using up to 4-channel powder feeder. Approved materials are: Fe (including stainless steel), Ni and Co alloys, (Cu,Ni 10%), WC compounds, TiC compounds. The developed coatings/parts are characterized by low porosity (<1%), fine microstructure, and their microhardness is close to the benchmark value of wrought alloys after thermal treatment (Co-based alloy Stellite, Inox 316L, stainless steel 17-4PH). The intended applications concern cooling elements with complex geometry, friction joints under high temperature and load, light-weight mechanical support structures, hermetic joints, tubes with complex geometry, and tailored inside and outside surface properties, etc

  14. Effect of co-free valve on activity reduction in PWR

    International Nuclear Information System (INIS)

    Bahn, C.B.; Han, B.C.; Bum, J.S.; Hwang, I.S.; Lee, C.B.

    2002-01-01

    Radioactive nuclei, such as 68 Co and 60 Co, deposited on out-of-core surfaces in a pressurized water reactor (PWR) primary coolant system, are major sources of occupational radiation exposure to plant maintenance personnel and act as costly impediment to prompt and effective repairs. Valve hardfacing alloys exposed to primary coolant are considered as one of the main Co sources. To evaluate the Co-free valve, such as NOREM 02 and Deloro 50, the candidates for the alternative to Stellite 6, in a simulated PWR primary condition, SNU corrosion test loop (SCOTL) was constructed. For gate valves hard-faced with made of NOREM 02 and Deloro 50 hot cycling tests were conducted for up to 2,000 on-off cycles with cold leak tests at 1,000 cycle interval. It was observed that the leak rate of NOREM 02 (Fe-base) did not satisfy the nuclear grade valve leak criteria. After 1000 cycles test, while there was no leakage in case of Deloro 50 (Ni-base). Also, Deloro 50 showed no leakage after 2000 cycles. To estimate the activity reduction effect, we modified CRUDSIM-MIT which modeled the effects of coolant chemistry on the crud transport and activity buildup in the primary system of PWR. In the new code, crud evaluation and assessment (CREAT), 60 Co activity buildup prediction includes 1) Co-base valve replacement effect, 2) Co-base valve maintenance effect, and 3) control rod drive mechanism (CRDM) and main coolant pump (MCP) shaft contribution. CREAT predicted that the main contributor of Co activity buildup was the corrosion-induced release of Co from the steam generator (SG) tubing. With new SG's tubed with alloy 690, Korean Next Generation Reactor (APR-1400) is expected to have about 64% lower Co activity on SG surface. The use of all Co-free valves is expected to cut additional 8% of activity which is only marginal. (authors)

  15. Improvement of rotary specimen rack design

    International Nuclear Information System (INIS)

    Batch, J.M.; Gietzen, A.J.

    1978-01-01

    A redesign and verification test program has been completed on a new Rotary Specimen Rack ('Lazy Susan') design for the TRIGA Mark III. The purpose of the redesign was to solve a rotation problem which occurred at power levels of about 1 MW and above. The previous redesign effort on the Mark II-type lazy susan was made in 1967 when the bearing was changed to use stellite balls, spring-type separators and stainless-steel bearing races. An extensive test program at that time showed that the design gave excellent service under all anticipated operating conditions. Fifteen of these units have been installed in the past ten years and have been essentially trouble-free. Although the bearing design for the Mark III was very similar, the component layout was such that irradiation-induced heating with associated thermal expansion resulted in decreased bearing clearance and an increase in the required driving torque. The solution involved redesign and re-arrangement of the rack drive mechanism. A series of stringent operational proof tests were made under high temperature and temperature differential conditions which proved successful operation of the new design. The severe conditions under which these tests were performed uncovered further difficulties with the bearing and led to a re-evaluation of the bearing design. A new design was developed in which the spring separators were replaced by similar sized, cylindrical graphite spacers. The entire series of operational and life tests were repeated and the performance was outstanding. Acceptable wear characteristics of the spacers were verified and the bearing was noticeably smoother and quieter than with previous designs. A Mark III lazy susan of this new design was installed in a TRIGA about one year ago and operated at power levels up to 2 MW with excellent performance. The Mark II design has now been changed to incorporate the new drive and bearing design proven for the Mark III. (author)

  16. Chemistry in water reactors

    International Nuclear Information System (INIS)

    Hermansson, H.P.; Norring, K.

    1994-01-01

    The international conference Chemistry in Water Reactors was arranged in Nice 24-27/04/1994 by the French Nuclear Energy Society. Examples of technical program areas were primary chemistry, operational experience, fundamental studies and new technology. Furthermore there were sessions about radiation field build-up, hydrogen chemistry, electro-chemistry, condensate polishing, decontamination and chemical cleaning. The conference gave the impression that there are some areas that are going to be more important than others during the next few years to come. Cladding integrity: Professor Ishigure from Japan emphasized that cladding integrity is a subject of great concern, especially with respect to waterside corrosion, deposition and release of crud. Chemistry control: The control of the iron/nickel concentration quotient seems to be not as important as previously considered. The future operation of a nuclear power plant is going to require a better control of the water chemistry than achievable today. One example of this is solubility control via regulation in BWR. Trends in USA: means an increasing use of hydrogen, minimization of SCC/IASCC, minimization of radiation fields by thorough chemistry control, guarding fuel integrity by minimization of cladding corrosion and minimization of flow assisted corrosion. Stellite replacement: The search for replacement materials will continue. Secondary side crevice chemistry: Modeling and practical studies are required to increase knowledge about the crevice chemistry and how it develops under plant operation conditions. Inhibitors: Inhibitors for IGSCC and IGA as well for the primary- (zinc) as for the secondary side (Ti) should be studied. The effects and mode of operation of the inhibitors should be documented. Chemical cleaning: of heat transfer surfaces will be an important subject. Prophylactic cleaning at regular intervals could be one mode of operation

  17. Development surface modification technologies - A development of new nuclear materials by thin film deposition methods

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Won Jong; Lee, Min Goo; Kim, Hyun Ho; Kim, Yong Il; Kwang, Hee Soo [Korea Advanced Institute of Scienec and Technology, Taejon (Korea, Republic of)

    1995-08-01

    Pitting corrosion of TiN-coted Inconel 600 in hightemperature chloride solution was studied. To improve the pitting resistance of Inconel 600 by depositing TiN thin film, TiN must have the thickness greater than a critical value at which the characteristics of the film itself appear. E{sub np}s of the TiN-coated sample were higher than those of the bare Inconel 600 at all the solution temperature implying that the TiN film improved the pitting resistance. The heavy defects on the surface of the substrate which were incompletely covered by TiN film served as the active sites for the pit nucleation. Fine polishing reduced those defects and improved the pitting resistance of the TiN-coated Inconel 600. The pit densities of the TiN-coated samples were much lower than those of the bare Inconel 600 at low chloride concentrations. However, at high chloride concentrations the TiN film failed to improve the pitting resistance of the Inconel. The TiN film deposited by ion-plating on Stellite was studied. The X-ray analysis shows that the deposited films were only in .delta.-TiN phase and the texture was changed from (111) to (200) with the increase of N{sub 2}/Ar ratio. The impurities in TiN films were carbon and oxygen. The amounts of these impurities were decreased greatly when the substrate bias, -200 V, was applied compared to no bias. 40 refs., 4 tabs., 20 figs. (author)

  18. Experience with dilute chemical decontamination in Indian Pressurized Heavy Water Reactors

    International Nuclear Information System (INIS)

    Velmurugan, S.; Rufus, A.L.; Sathyaseelan, V.S.; Subramanian, Veena; Mittal, V.K.; Narasimhan, S.V.

    2010-01-01

    Dilute Chemical Decontamination (DCD) process has been used in several full system and components of nuclear coolant systems to effectively remove the radioactive contaminants that causes radiation field and consequent MANREM problem. The DCD process uses chemicals in very low concentrations (millimolar) and dissolves the oxide film along with the activity incorporated in the oxide film. In DCD process operated under the regenerative mode, the chemical formulation spent in the process of oxide dissolution is replenished by passing through cation exchange columns. Finally, after achieving sufficient decontamination of the system/component, the added decontamination chemicals along with the activities and metal ions released during the process are removed by mixed bed ion exchange columns and the system is restored to normal operating condition in few days time. In PHWRs, the regenerative DCD process is applied for full primary coolant system decontamination. The chemicals are added directly to the heavy water coolant with the fuel in the core. In Indian PHWRs (MAPS-1 and 2, RAPS-1 and 2, NAPS-1 and 2 and KAPS-1), the process has been applied eleven times. A chemical formulation based on NTA, Citric acid and Ascorbic acid has been applied seven times with good results. Decontamination factors in the range 2-30 have been obtained in different components with good MANREM savings in the subsequent maintenance works. Efforts are on to modify the process to take care of the challenges posed by antimony isotope. An inhibitor (Rodine-92B) based process was successfully tested in NAPS-2 for removing antimony isotopes ( 122 Sb and 124 Sb). Further refining of the antimony removal process is being worked out. Similarly, the process is being modified to effectively remove the hotspot causing stellite particles in the moderator system of PHWRs. A permanganate based process has been developed and tested in several adjustor rod drive mechanisms in KAPS and NAPS. The experience of

  19. Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components

    Energy Technology Data Exchange (ETDEWEB)

    Thivillon, L.; Bertrand, Ph.; Laget, B. [Ecole Nationale d' Ingenieurs de Saint-Etienne (ENISE), DIPI Laboratory, 58 rue Jean Parot, 42023 Saint-Etienne cedex 2 (France); Smurov, I. [Ecole Nationale d' Ingenieurs de Saint-Etienne (ENISE), DIPI Laboratory, 58 rue Jean Parot, 42023 Saint-Etienne cedex 2 (France)], E-mail: smurov@enise.fr

    2009-03-31

    Direct metal deposition (DMD) is an automated 3D deposition process arising from laser cladding technology with co-axial powder injection to refine or refurbish parts. Recently DMD has been extended to manufacture large-size near-net-shape components. When applied for manufacturing new parts (or their refinement), DMD can provide tailored thermal properties, high corrosion resistance, tailored tribology, multifunctional performance and cost savings due to smart material combinations. In repair (refurbishment) operations, DMD can be applied for parts with a wide variety of geometries and sizes. In contrast to the current tool repair techniques such as tungsten inert gas (TIG), metal inert gas (MIG) and plasma welding, laser cladding technology by DMD offers a well-controlled heat-treated zone due to the high energy density of the laser beam. In addition, this technology may be used for preventative maintenance and design changes/up-grading. One of the advantages of DMD is the possibility to build functionally graded coatings (from 1 mm thickness and higher) and 3D multi-material objects (for example, 100 mm-sized monolithic rectangular) in a single-step manufacturing cycle by using up to 4-channel powder feeder. Approved materials are: Fe (including stainless steel), Ni and Co alloys, (Cu,Ni 10%), WC compounds, TiC compounds. The developed coatings/parts are characterized by low porosity (<1%), fine microstructure, and their microhardness is close to the benchmark value of wrought alloys after thermal treatment (Co-based alloy Stellite, Inox 316L, stainless steel 17-4PH). The intended applications concern cooling elements with complex geometry, friction joints under high temperature and load, light-weight mechanical support structures, hermetic joints, tubes with complex geometry, and tailored inside and outside surface properties, etc.

  20. Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components

    Science.gov (United States)

    Thivillon, L.; Bertrand, Ph.; Laget, B.; Smurov, I.

    2009-03-01

    Direct metal deposition (DMD) is an automated 3D deposition process arising from laser cladding technology with co-axial powder injection to refine or refurbish parts. Recently DMD has been extended to manufacture large-size near-net-shape components. When applied for manufacturing new parts (or their refinement), DMD can provide tailored thermal properties, high corrosion resistance, tailored tribology, multifunctional performance and cost savings due to smart material combinations. In repair (refurbishment) operations, DMD can be applied for parts with a wide variety of geometries and sizes. In contrast to the current tool repair techniques such as tungsten inert gas (TIG), metal inert gas (MIG) and plasma welding, laser cladding technology by DMD offers a well-controlled heat-treated zone due to the high energy density of the laser beam. In addition, this technology may be used for preventative maintenance and design changes/up-grading. One of the advantages of DMD is the possibility to build functionally graded coatings (from 1 mm thickness and higher) and 3D multi-material objects (for example, 100 mm-sized monolithic rectangular) in a single-step manufacturing cycle by using up to 4-channel powder feeder. Approved materials are: Fe (including stainless steel), Ni and Co alloys, (Cu,Ni 10%), WC compounds, TiC compounds. The developed coatings/parts are characterized by low porosity (<1%), fine microstructure, and their microhardness is close to the benchmark value of wrought alloys after thermal treatment (Co-based alloy Stellite, Inox 316L, stainless steel 17-4PH). The intended applications concern cooling elements with complex geometry, friction joints under high temperature and load, light-weight mechanical support structures, hermetic joints, tubes with complex geometry, and tailored inside and outside surface properties, etc.

  1. Corrosion surveillance of the chemical decontamination process in Kuosheng nuclear power plant

    International Nuclear Information System (INIS)

    Wang, L.H.

    2002-01-01

    The Piping Recirculation System (RRS) and reactor water clean-up system (RWCU) of Kuosheng Nuclear Power Plant of Taiwan Power Company were decontaminated by CORD process of Framatome ANP GmbH during the outage at October 2001. This is the first time that CORD process was adopted and applied in Taiwan Nuclear Power Plant. To verify minor corrosion damage and correct process control, the material corrosion condition was monitored during all the stages of the chemical decontamination work. Three kinds of specimen were adopted in this corrosion monitoring, including corrosion coupons for weight loss measurements, electrochemical specimens for on-line corrosion monitoring, and WOL specimens (wedge opening loaded) for stress corrosion evaluation. The measured metal losses from nine coupon materials did not reveal any unexpected or intolerable high corrosion damage from the CORD UV or CORD CS processes. The coupon materials included type 304 stainless steel (SS) with sensitized and as-received thermal history, type 308 weld filler, type CF8 cast SS, nickel base alloy 182 weld filler, Inconel 600, Stellite 6 hard facing alloy, NOREM low cobalt hard facing alloy, and A106B carbon steel (CS). The electrochemical noise (ECN) measurements from three-electrode electrochemical probe precisely depicted the metal corrosion variation with the decontamination process change. Most interestingly, the estimated trend of accumulated metal loss is perfectly corresponding to the total removed activities. The ECN measurements were also used for examining the effect of different SS oxide films pre-formed in NWC and HWC on the decontamination efficiency, and for evaluating the galvanic effect of CS with SS. The existing cracks did not propagate further during the decontamination. The average decontamination factors achieved were 50.8 and 4.2 respectively for RRS and RWCU. (authors)

  2. Analysis of PTA hardfacing with CoCrWC and CoCrMoSi alloys

    Directory of Open Access Journals (Sweden)

    Adriano Scheid

    2013-12-01

    Full Text Available CoCrWC alloys are widely used to protect components that operate under wear and high temperature environments. Enhanced performance has been achieved with the CoCrMoSi alloys but processing this alloy system is still a challenge due to the presence of the brittle Laves phase, particularly when welding is involved. This work evaluated Plasma Transferred Arc coatings processed with the Co-based alloy CoMoCrSi - Tribaloy T400, reinforced with Laves phase, comparing its weldability to the CoCrWC - Stellite 6, reinforced with carbides. Coatings were also analyzed regarding the response to temperature exposure at 600°C for 7 days and subsequent effect on microstructure and sliding abrasive wear. Coatings characterization was carried out by light and scanning electron microscopy, X-ray diffraction and Vickers hardness. CoCrWC coatings exhibited a Cobalt solid solution dendritic microstructure and a thin interdendritic region with eutectic carbides, while CoCrMoSi deposits exhibit a large lamellar eutectic region of Laves phase and Cobalt solid solution and a small fraction of primary Laves phase. Although phase stability was observed by X-ray diffraction, coarsening of the microstructure occurred for both alloys. CoCrMoSi showed thicker lamellar Laves phase and CoCrWC coarser eutectic carbides. Coatings stability assessed by wear tests revealed that although the wear rate of the as-deposited CoCrMoSi alloy was lower than that of CoCrWC alloy its increase after temperature exposure was more significant, 22% against 15%. Results were discussed regarding the protection of industrial components in particular, bearings in 55AlZn hot dip galvanizing components.

  3. Corrosion behaviour and surface analysis of a Co-Cr and two Ni-Cr dental alloys before and after simulated porcelain firing.

    Science.gov (United States)

    Qiu, Jing; Yu, Wei-Qiang; Zhang, Fu-Qiang; Smales, Roger J; Zhang, Yi-Lin; Lu, Chun-Hui

    2011-02-01

    This study evaluated the corrosion behaviour and surface properties of a commercial cobalt-chromium (Co-Cr) alloy and two nickel-chromium (Ni-Cr) alloys [beryllium (Be)-free and Be-containing] before and after a simulated porcelain-firing process. Before porcelain firing, the microstructure, surface composition and hardness, electrochemical corrosion properties, and metal-ion release of as-cast alloy specimens were examined. After firing, similar alloy specimens were examined for the same properties. In both as-cast and fired conditions, the Co-Cr alloy (Wirobond C) showed significantly more resistance to corrosion than the two Ni-Cr alloys. After firing, the corrosion rate of the Be-free Ni-Cr alloy (Stellite N9) increased significantly, which corresponded to a reduction in the levels of Cr, molybdenum (Mo), and Ni in the surface oxides and to a reduction in the thickness of the surface oxide film. The corrosion properties of the Co-Cr alloy and the Be-containing Ni-Cr alloy (ChangPing) were not significantly affected by the firing process. Porcelain firing also changed the microstructure and microhardness values of the alloys, and there were increases in the release of Co and Ni ions, especially for Ni from the Be-free Ni-Cr alloy. Thus, the corrosion rate of the Be-free Ni-Cr alloy increased significantly after porcelain firing, whereas the firing process had little effect on the corrosion susceptibility of the Co-Cr alloy and the Be-containing Ni-Cr alloy. © 2011 Eur J Oral Sci.

  4. Erosion resistance comparison of alternative surface treatments

    Science.gov (United States)

    Česánek, Z.; Schubert, J.; Houdková, Š.

    2017-05-01

    Erosion is a process characterized by the particle separation and the damage of component functional surfaces. Thermal spraying technology HP/HVOF (High Pressure / High Velocity Oxygen Fuel) is commonly used for protection of component surfaces against erosive wear. Alloy as well as cermet based coatings meet the requirements for high erosion resistance. Wear resistance is in many cases the determining property of required component functioning. The application suitability of coating materials is particularly influenced by different hardness. This paper therefore presents an erosion resistance comparison of alloy and cermet based coatings. The coatings were applied on steel substrates and were subjected to the erosive test using the device for evaluation of material erosion resistance working on the principle of centrifugal erodent flow. Abrasive sand Al2O3 with grain size 212-250 μm was selected as an erosive material. For this purpose, the specimens were prepared by thermal spraying technology HP/HVOF using commercially available powders Stellite 6, NiCrBSi, Cr3C2-25%NiCr, Cr3C2-25%CoNiCrAlY, Hastelloy C-276 and experimental coating TiMoCN-29% Ni. Erosion resistance of evaluated coatings was compared with erosive resistance of 1.4923 high alloyed steel without nitridation and in nitrided state and further with surface treatment using technology PVD. According to the evaluation, the resulting erosive resistance depends not only on the selected erodent and surface protection, but also on the erodent impact angle.

  5. Microstructural evolution and control in laser material processing

    International Nuclear Information System (INIS)

    Kaul, R.; Nath, A.K.

    2005-01-01

    Laser processing, because of its characteristic features, often gives rise to unique microstructure and properties not obtained with other conventional processes. We present various diverse laser processing case studies involving control of microstructure through judicious selection of processing parameters carried out with indigenously developed high power CO 2 lasers. The first study describes microstructural control during end plug laser welding of PFBR fuel pin, involving crack pone alloy D9 tube and type 316 M stainless steel (SS) plug, through preferential displacement of focused laser beam. Crater and associated cracks were eliminated by suitable laser power ramping. Another case study describes how low heat input characteristics of laser cladding process has been exploited for suppressing dilution in 'Colomony 6' deposits on austenitic SS. The results are in sharp contrast to extensive dilution noticed in Colmony 6 hard faced deposits made by GTAW. A novel laser surface melting (LSM) treatment for type 316 (N) SS weld metal has been developed to generate a sensitization-resistant microstructure which leads to enhanced resistance against intergranular corrosion (IGC). IGC resistance of laser treated surface has been found to be critically dependent on laser processing parameters. Experimental observations have been analyzed with thermal simulation. We have also studied the effect of laser beam spatial intensity profile on the microstructure in LSM. We have developed laser-assisted graded hard facing of austenitic SS substrate with Stellite 6 which, in contrast to direct deposition either by laser or GTAW, produced smooth transition in chemical composition and hardness used to control grain coarsening and martensite formation in type 430 SS weldment. Laser rapid manufacturing (LRM) is emerging as a new rapid and cost effective process for low volume fabrication, esp. of expensive materials. The talk will also present microstructural characteristics of laser

  6. Reducing plant radiation fields by source term reduction - tracking cobalt and antimony to their sources at Gentilly-2

    International Nuclear Information System (INIS)

    Gauthier, P.; Guzonas, D.A.

    2006-01-01

    Gentilly-2 NGS is experiencing high radiation fields in the fuelling machine vaults. These high fields make maintenance outages more expensive and their management more complicated. As part of the station refurbishment project, a task group was created to identify the cause of the high fields and make recommendations to prevent their reoccurrence in the second (post-refurbishment) operating cycle. To identify the root cause of the problem, the task group decided to analyse the primary heat transport system (PHTS), the fuel handling system and their inter-relation. Gentilly-2 has had to manage a unique (to CANDU) problem arising from antimony released from the main heat transport pump seals. Antimony deposits on in-core surfaces, becomes activated, and subsequently can be released, especially under oxidizing coolant conditions. It then becomes incorporated into the magnetite deposits on PHTS piping, including the steam generators and inlet feeders. Gentilly-2 has focused a great deal of effort on managing antimony over the last 15 years. As a result of these initiatives, radioantimony fields have been quite effectively managed since 1997, resulting in a decrease in their relative contribution to the total fields. The decrease in radioantimony fields highlighted the significant contribution of 60 Co cobalt activity; the high levels of both radioantimony and 60 Co differentiate Gentilly-2 from other CANDU 6 plants. Two types of 59 Co sources are present in the CANDU PHTS. High surface area materials such as steam generator tubes and feeder pipes contain trace concentrations of 59 Co as an impurity, which can be released by corrosion. Low surface area materials such as Stellites contain high concentrations of 59 Co that can be released as either corrosion or wear products. After assessing potential cobalt sources, the task group concluded that PHTS materials were not likely the origin of the high 60 Co fields. The major PHTS components identified as cobalt sources have

  7. Performance of candidate gas turbine abradeable seal materials in high temperature combustion atmospheres

    Energy Technology Data Exchange (ETDEWEB)

    Simms, N.J. [Cranfield University, Power Generation Technology Centre, Cranfield, Beds, MK43 0AL (United Kingdom); Norton, J.F. [Cranfield University, Power Generation Technology Centre, Cranfield, Beds, MK43 0AL (United Kingdom); Consultant in Corrosion Science and Technology, Hemel Hempstead, Herts HP1 1SR (United Kingdom); McColvin, G. [Siemens Industrial Turbines Ltd., Lincoln, LN5 7FD (United Kingdom)

    2005-11-01

    The development of abradeable gas turbine seals for higher temperature duties has been the target of an EU-funded R and D project, ADSEALS, with the aim of moving towards seals that can withstand surface temperatures as high as {proportional_to} 1100 C for periods of at least 24,000 h. The ADSEALS project has investigated the manufacturing and performance of a number of alternative materials for the traditional honeycomb seal design and novel alternative designs. This paper reports results from two series of exposure tests carried out to evaluate the oxidation performance of the seal structures in combustion gases and under thermal cycling conditions. These investigations formed one part of the evaluation of seal materials that has been carried out within the ADSEALS project. The first series of three tests, carried out for screening purposes, exposed candidate abradeable seal materials to a simulated natural gas combustion environment at temperatures within the range 1050-1150 C in controlled atmosphere furnaces for periods of up to {proportional_to} 2,500 h with fifteen thermal cycles. The samples were thermally cycled to room temperature on a weekly basis to enable the progress of the degradation to be monitored by mass change and visual observation, as well as allowing samples to be exchanged at planned intervals. The honeycombs were manufactured from PM2000 and Haynes 214. The backing plates for the seal constructions were manufactured from Haynes 214. Some seals contained fillers or had been surface treated (e.g. aluminised). The second series of three tests were carried out in a natural gas fired ribbon furnace facility that allowed up to sixty samples of candidate seal structures (including honeycombs, hollow sphere structures and porous ceramics manufactured from an extended range of materials including Aluchrom YHf, PM2Hf, Haynes 230, IN738LC and MarM247) to be exposed simultaneously to a stream of hot combustion gas. In this case the samples were cooled

  8. Microstructural Evolution and Creep-Rupture Behavior of Fusion Welds Involving Alloys for Advanced Ultrasupercritical Power Generation

    Science.gov (United States)

    Bechetti, Daniel H., Jr.

    Projections for large increases in the global demand for electric power produced by the burning of fossil fuels, in combination with growing environmental concerns surrounding these fuel sources, have sparked initiatives in the United States, Europe, and Asia aimed at developing a new generation of coal fired power plant, termed Advanced Ultrasupercritical (A-USC). These plants are slated to operate at higher steam temperatures and pressures than current generation plants, and in so doing will offer increased process cycle efficiency and reduced greenhouse gas emissions. Several gamma' precipitation strengthened Ni-based superalloys have been identified as candidates for the hottest sections of these plants, but the microstructural instability and poor creep behavior (compared to wrought products) of fusion welds involving these alloys present significant hurdles to their implementation and a gap in knowledge that must be addressed. In this work, creep testing and in-depth microstructural characterization have been used to provide insight into the long-term performance of these alloys. First, an investigation of the weld metal microstructural evolution as it relates to creep strength reductions in A-USC alloys INCONELRTM 740, NIMONICRTM 263 (INCONEL and NIMONIC are registered trademarks of Special Metals Corporation), and HaynesRTM 282RTM (Haynes and 282 are registered trademarks of Haynes International) was performed. gamma'-precipitate free zones were identified in two of these three alloys, and their development was linked to the evolution of phases that precipitate at the expense of gamma'. Alloy 282 was shown to avoid precipitate free zone formation because the precipitates that form during long term aging in this alloy are poor in the gamma'-forming elements. Next, the microstructural evolution of INCONELRTM 740H (a compositional variant of alloy 740) during creep was investigated. Gleeble-based interrupted creep and creep-rupture testing was used to

  9. Materials for advanced ultrasupercritical steam turbines

    Energy Technology Data Exchange (ETDEWEB)

    Purgert, Robert [Energy Industries Of Ohio Inc., Independence, OH (United States); Shingledecker, John [Energy Industries Of Ohio Inc., Independence, OH (United States); Saha, Deepak [Energy Industries Of Ohio Inc., Independence, OH (United States); Thangirala, Mani [Energy Industries Of Ohio Inc., Independence, OH (United States); Booras, George [Energy Industries Of Ohio Inc., Independence, OH (United States); Powers, John [Energy Industries Of Ohio Inc., Independence, OH (United States); Riley, Colin [Energy Industries Of Ohio Inc., Independence, OH (United States); Hendrix, Howard [Energy Industries Of Ohio Inc., Independence, OH (United States)

    2015-12-01

    The U.S. Department of Energy (DOE) and the Ohio Coal Development Office (OCDO) have sponsored a project aimed at identifying, evaluating, and qualifying the materials needed for the construction of the critical components of coal-fired power plants capable of operating at much higher efficiencies than the current generation of supercritical plants. This increased efficiency is expected to be achieved principally through the use of advanced ultrasupercritical (A-USC) steam conditions. A limiting factor in this can be the materials of construction for boilers and for steam turbines. The overall project goal is to assess/develop materials technology that will enable achieving turbine throttle steam conditions of 760°C (1400°F)/35MPa (5000 psi). This final technical report covers the research completed by the General Electric Company (GE) and Electric Power Research Institute (EPRI), with support from Oak Ridge National Laboratory (ORNL) and the National Energy Technology Laboratory (NETL) – Albany Research Center, to develop the A-USC steam turbine materials technology to meet the overall project goals. Specifically, this report summarizes the industrial scale-up and materials property database development for non-welded rotors (disc forgings), buckets (blades), bolting, castings (needed for casing and valve bodies), casting weld repair, and casting to pipe welding. Additionally, the report provides an engineering and economic assessment of an A-USC power plant without and with partial carbon capture and storage. This research project successfully demonstrated the materials technology at a sufficient scale and with corresponding materials property data to enable the design of an A-USC steam turbine. The key accomplishments included the development of a triple-melt and forged Haynes 282 disc for bolted rotor construction, long-term property development for Nimonic 105 for blading and bolting, successful scale-up of Haynes 282 and Nimonic 263 castings using

  10. NEOEVOLUCIONISMO Y ECOLOGÍA CULTURAL. LA OBRA DE JULIAN STEWARD Y LA RENOVACIÓN DE LA ENSEÑANZA DE LA ANTROPOLOGÍA EN LA ARGENTINA / Neo-evolutionism and cultural ecology. The Argentine Renovation of Anthropology Teaching under the influence of J. Steward

    Directory of Open Access Journals (Sweden)

    Gastón Julián Gil

    2010-12-01

    Full Text Available La introducción de la obra del antropólogo norteamericano Julian Haynes Steward (1902-1972 produjo una parcial renovación de la enseñanza de la antropología en la Argentina desde mediados de la década del cincuenta. Principalmente en arqueología (y más tarde en lo que comenzaría a llamarse antropología social, el enfoque materialista, neoevolucionista y ecológico entró en tensión con la corriente histórico-cultural alemana que había hegemonizado el campo antropológico nacional liderado por el italiano José Imbelloni desde la Universidad de Buenos Aires. La circulación de estas nuevas ideas -que también provocaron fuertes polémicas en su ámbito de gestación original- es abordada principalmente a partir de la labor transformadora y revitalizadora de Alberto Rex González, posgraduado en la Universidad de Columbia y alumno de Steward a fines de los años cuarenta. De este modo, se propone un análisis de las maneras en que nuevos postulados conceptuales provenientes de una tradición metropolitana se difundieron en un contexto periférico.Palabras Clave: Antropología argentina; Neoevolucionismo; Ecología cultural; UniversidadAbstractThe introduction of the U.S. anthropologist Julian Haynes Steward (1902-1972 to the Argentine courses of Anthropology in the mid-50´s, launched a process of partial renovation in Argentine anthropology.  His materialistic, neoevolutionist, and ecological scope applied to Archeology and, later, to what would become Social Anthropology, differed from more established views such as German historical-cultural theory led by Italian anthropologist José Imbelloni and Austrian archaeologist Oswald Menghin. This paper describes and analyzes the arrival of Steward’s ideas to some Argentine schools of Anthropology (Córdoba, Litoral/Rosario and La Plata in the late 40s, by means of archaeologist Alberto Rex González, a Columbia Ph.D. and one of Steward’s students. In fact, studying Steward

  11. Avaliação das propriedades de painéis aglomerados produzidos com resíduos de serrarias de nove espécies de madeiras tropicais da Amazônia Evaluation of the properties of particleboard made from sawmill waste of nine tropical wood species of Amazon

    Directory of Open Access Journals (Sweden)

    Setsuo Iwakiri

    2012-03-01

    Full Text Available Esta pesquisa teve como objetivo avaliar a qualidade de painéis aglomerados produzidos com resíduos de processamento em serraria de nove espécies de madeiras tropicais da Amazônia. As espécies estudadas foram: Scleronema micranthum Ducke (Cardeiro, Ecclinusa guianensis Eyma (Caucho, Scleronema sp. (Castanha-de-paca, Copaifera multijuga Hayne (Copaíba, Ocotea sp. (Louro, Ocotea guianensis Aubl (Louro-espinho, Caryocar villosum Pers. (Piquiarana, Couratari oblongifolia Ducke & R. Knuth (Tauari e Virola surinamensis Rol. Warb (Virola. Foram produzidos painéis experimentais com densidade nominal de 0,75 g.cm-3, utilizando a resina uréia-formaldeído na proporção de 8% de sólidos - base peso seco das partículas. Os painéis foram prensados com pressão específica de 4,0 MPa, temperatura de 160 ºC e tempo de prensagem de oito minutos. As avaliações dos resultados de ensaios obtidos nesta pesquisa indicam a viabilidade técnica de utilização das nove espécies provenientes de florestas tropicais da Amazônia na produção de painéis de madeira aglomerada, com destaque para Ecclinusa guianensis Eyma (Caucho que, de uma forma geral, apresentou melhores resultados de propriedades físico-mecânicas.This research was developed to evaluate the quality of particleboards manufactured from sawmill waste of nine tropical wood species of Amazônia. The following species were studied: Scleronema micranthum Ducke (Cardeiro, Ecclinusa guianensis Eyma (Caucho, Scleronema sp. (Castanha-de-paca, Copaifera multijuga Hayne (Copaíba, Ocotea sp. (Louro, Ocotea guianensis Aubl (Louro-espinho, Caryocar villosum Pers. (Piquiarana, Couratari oblongifolia (Tauari e Virola surinamensis Rol. Warb (Virola. The experimental boards were manufactured with the nominal density of 0.75 g.cm-3, using the urea-formaldehyde resin in the proportion of 8% of solid content based on oven dried wood particles. The boards were pressed at the specific pressure of 40 kgf

  12. Associação micorízica em espécies arbóreas, atividade microbiana e fertilidade do solo em áreas degradadas de cerrado

    Directory of Open Access Journals (Sweden)

    Márcia Helena Scabora

    2011-06-01

    Full Text Available A recuperação de áreas de obras das barragens, em especial de "áreas de empréstimos", é difícil e consiste em um processo lento, visto que toda a vegetação e a camada fértil do solo foram removidas. Intervenções nessas áreas poderiam acelerar o processo de revegetação. O presente trabalho teve como objetivo avaliar a associação de fungos micorrízicos arbusculares (FMA em espécies arbóreas, atividade microbiana pela respiração basal e fertilidade em áreas degradadas de cerrado. Utilizou-se solo de duas áreas, solo de pastagem e subsolo exposto. Adubações orgânica e mineral, além da calagem, foram efetuadas nas covas, visando a um melhor crescimento inicial das mudas, assim como, 50 mL de solo de cerrado preservado como inoculante de microrganismos. Mudas de 11 espécies arbóreas foram plantadas ou seja: Anadenanthera falcata (Benth. Speg. (angico-preto, Acacia polyphylla D.C. (monjoleiro, Stryphnodendron adstringens (Mart. Coville (barbatimão, Dimorphandra mollis Benth (faveiro, Hymenaea stigonocarpa Mart. ex Hayne (jatobá-de-cerrado, Dipteryx alata Vog. (baru, Machaerium acutifolium Vogel (jacarandá-do-campo, Schinus terebinthifolia Raddi (aroeira-pimenteira, Magonia pubescens St. Hil. (tingui, Lafoensia pacari St. Hil. (dedaleira e Tabebuia aurea (Manso Benth. & Hook. (ipê-amarelo. Doze meses após a instalação do experimento, amostras de raízes foram coletadas na camada de 0-0,10 m para as avaliações. O subsolo, em relação ao solo de pastagem, continuou pobre em matéria orgânica e com menor atividade microbiana. As maiores porcentagens de colonização micorrízica por FMA foram observados nas espécies Acacia polyphylla D.C. (monjoleiro, Magonia pubescens St. Hil. (tingui, Hymenaea stigonocarpa Mart. ex Hayne (jatobá-de-cerrado e Schinus terebinthifolia Raddi (aroeira-pimenteira. Tais espécies podem ser indicadas para projetos de revegetação em áreas degradadas de cerrado. As plantas das duas

  13. The Sundown of the United States Marine Corps Naval Flight Officer Military Occupational Specialties

    Science.gov (United States)

    2010-04-20

    EIA-6B Electronics Warfare Officer (EWO) will complete their training in FY2015 and FY2017, respectively, with the last Fl A-18D and El A-6B squadrons...Capability (IOC) of the F-4 Phantom, A-6 Intruder, and the OV -10 Bronco introduced the requirement for Naval Flight Officers and Aerial Observers (AO...Officer (ECMO) to target Surface to Air Radars during the Vietnam War and was subsequently replaced by the four-seat E/A-6B. The OV-10 Bronco , roc in

  14. 75 FR 9725 - Free Annual File Disclosures

    Science.gov (United States)

    2010-03-03

    ... activities of companies that attempt to trick people into buying something that they are entitled by Federal... maintain the file disclosure for future reference. 74 FR at 52917- 918. Cf. Franchise Rule, 16 CFR 436.6(b...

  15. 75 FR 47475 - Acetamiprid, Mepiquat; Order Denying NRDC’s Objections on Remand: Environmental Protection Agency

    Science.gov (United States)

    2010-08-06

    ... normal blood chemicals (including glucose, total cholesterol, urea nitrogen, creatinine, total protein..., prune; nut, tree, group 14; pea and bean, succulent shelled, subgroup 6B; pistachio; plum, prune, dried...

  16. 75 FR 55997 - Carbaryl; Order Denying NRDC's Objections and Requests for Hearing

    Science.gov (United States)

    2010-09-15

    ..., creatinine, total protein, total bilirubin, albumin, hormones, and enzymes such as alkaline phosphatase...: carbaryl use in or on pea and bean, succulent shelled (subgroup 6B); millet; wheat; pre-plant root dip for...

  17. 76 FR 45636 - Self-Regulatory Organizations; BATS Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

    Science.gov (United States)

    2011-07-29

    ... aggressive quoting and shift economics associated with non-transparent payment for order flow arrangements to... with Section 6(b)(5) of the Act,\\9\\ because it would promote just and equitable principles of trade...

  18. Dicty_cDB: CFI644 [Dicty_cDB

    Lifescience Database Archive (English)

    Full Text Available Original site) Representative DNA sequence >CFI644 (CFI644Q) /CSM/CF/CFI6-B/CFI644Q.Seq.d/ XXXXXXXXXXTCCAAATTTCCATANA.... >CFI644Z.Seq NNNNNNNNNNTCCAAATTTCCATANATGTGTTTAAAAACGTGGNGGNATNTTAAGNTGNG AATTTNANCCCCCNANACAACCNANATCCCTT

  19. 17 CFR 200.551 - Applicability.

    Science.gov (United States)

    2010-04-01

    ... AND ETHICS; AND INFORMATION AND REQUESTS Regulations Pertaining to the Protection of the Environment... sections 6(b) and 7 of the Public Utility Holding Company Act of 1935 and acquisitions subject to sections...

  20. Characterization of Ag/Ag2SO4 system as reference electrode for in ...

    Indian Academy of Sciences (India)

    of water.10 For example, tetrafluoroborates, the most popular salts ... forming aggressive hydrofluoric acid.10–12. 'Tradi- ..... in figure 6(b) (its characteristics are also presented in table 2). .... leaders (viz., Maxwell, NessCap) working with elec-.

  1. 75 FR 4603 - Self-Regulatory Organizations; NASDAQ OMX BX, Inc.; Notice of Filing and Immediate Effectiveness...

    Science.gov (United States)

    2010-01-28

    ... Protection and Locked/ Crossed Market Plan (``Decentralized Plan'').\\6\\ In particular, the Commission... general, and Section 6(b)(5) of the Act,\\10\\ in particular, in that it is designed to foster cooperation...

  2. Disease: H01794 [KEGG MEDICUS

    Lifescience Database Archive (English)

    Full Text Available H01794 Genitopatellar syndrome (GPS) Genitopatellar syndrome (GPS) is a rare disorder in which patel...f the gene encoding the histone acetyltransferase KAT6B cause Genitopatellar synd

  3. Iraq: Recent Developments in Reconstruction Assistance

    National Research Council Canada - National Science Library

    Tarnoff, Curt

    2005-01-01

    ... $3.6b in grant aid and as much as $13.3b in possible loans. On Feb. 14, 2005, the President sent a supplemental appropriations request to Congress that would, among other items, provide an additional...

  4. Fulltext PDF

    Indian Academy of Sciences (India)

    2018-03-30

    Mar 30, 2018 ... Strasbourg Cedex, France. 3CNRS, Institut Charles Sadron, ... long-term stability, cost-effectiveness and strong oxidizing power [14]. .... suspension), the threshold being reached after 30 min (data not shown). 2.6b EPR ...

  5. Detection of group D and viridans streptococci in blood by radiometric methods

    International Nuclear Information System (INIS)

    Beckwith, D.G.

    1979-01-01

    A prospective study was conducted to evaluate the radiometric detection of group D and viridans streptococci in blood, using three media preparations, Bactec 6A and 6B isotonic media and 8B hypertonic medium. All enterococci tested were detected by the 6A and 6B media. However, the 6A medium failed to detect 76% of the Streptococcus bovis isolates and 57% of the viridans streptococci, whereas all S. bovis isolates and 95% of the viridans streptococci were detected with the 6B formulation. No improvement in detection was noted in comparing the 6B and the 8B hypertonic media. The importance of adequate detection of this group of organisms, especially in patients with endocarditis, is discussed

  6. 48 CFR 422.404-6 - Modifications of wage determinations.

    Science.gov (United States)

    2010-10-01

    ... SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Labor Standards for Contracts... extension of the 90 day period for award after bid opening as provided in FAR 22.404-6(b)(6). ...

  7. National Manpower Inventory. Volume 3. Technical Documentation for Software for the Model

    Science.gov (United States)

    1985-09-01

    Radar & AXR-13 LLLTV IMA Technician Drone Electronics Technician EA-6a EXCAP Central Computer ( AYA -6) Technician EA-6B EXCAP DTS Opor & ALO-99 Displays...7196 AM 7212 AM 7222 AM 7223 Tllla DTS Operator & Digital Display Group IMA Technician EA-6B ICAP Central Computer AYA -6 Technician EA-3B OMA...Personnel Clerk 0131 Unit Diary Clerk 0151 Administrative Clerk 0161 Postal Clerk 0193 Personnel/Administrative Chief 0211 Counlefinlelligence

  8. 78 FR 50477 - Self-Regulatory Organizations; NASDAQ OMX PHLX LLC; Notice of Filing and Immediate Effectiveness...

    Science.gov (United States)

    2013-08-19

    ... a 10Gb Ultra connection, and a one-time installation fee of $1,500, which is identical to the 40Gb... objectives of Section 6(b)(5) of the Act \\10\\ in that it is designed to promote just and equitable principles... one-time installation fee is consistent with Section 6(b)(4) of the Act because it is identical to the...

  9. U.S. Navy Program Guide 2017

    Science.gov (United States)

    2017-01-01

    LRASM) . . . . . . . . . . . . . . . . 26 Paveway II Laser-Guided Bomb (LGB) / Dual-Mode LGB (GBU-10/12/16) and Paveway III (GBU-24) LGB . . 26...have driven EA-6B and AEA operational em - ployment rates to record levels. Status The EA-6B Improved Capability (ICAP) III upgrade reached initial...system (INS) guidance kit to improve the precision of existing 500-pound, 1,000-pound, and 2,000-pound general-purpose and penetrator bombs in all

  10. AcEST: DK959619 [AcEST

    Lifescience Database Archive (English)

    Full Text Available cotiana bentha... 149 1e-34 tr|Q5W6B7|Q5W6B7_ORYSJ Os05g0270000 protein OS=Oryza sativa subs... 139 2e-31 tr|A2Y2K9|A2Y2K...KIRVNVPLVF 613 A ++++VPL+F Sbjct: 170 SALLKIDVPLMF 181 >tr|A2Y2K9|A2Y2K9_ORYSI Putative uncharacterized prot

  11. MicroRNA-146a expression as a potential biomarker for rheumatoid ...

    African Journals Online (AJOL)

    Heba Mohamed Abdelkader Elsayed

    2016-07-26

    Jul 26, 2016 ... lows; enzyme activation at 95 °C, followed by 40 cycles of denaturation at 94 °C for 15s annealing at 55 °C for 30 s and extension at 70 °C for 30 s. The expression of the U6B small nuclear RNA (RNU6B) was used as endogenous control for data normalization. The RQ level (fold change) for miR-146a was ...

  12. The behaviour of aluminium in waters of the Mandovi estuary, west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Upadhyay, S.; SenGupta, R.

    over any biological or non-biological removal and/or supply through disso- lution/desorption processes involving suspended particles. Biological Si removal can be strongly seasonal and can vary with river flow/suspended solids con- centration... closely fol- lows the pattern of the September profile (Fig. 6b). During November and December the total Al con- centrations are approximately constant in the salinity range I 10 and then gradually increase with increas- ing salinity (Fig. 6b) closely...

  13. Pressure vessel code construction capabilities for a nickel-chromium-tungsten-molybdenum alloy

    International Nuclear Information System (INIS)

    Rothman, M.F.

    1990-01-01

    HAYNES alloy 230 (UNS NO6230) has achieved wide usage in a variety of high-temperature aerospace, chemical process industry and industrial heating applications since its introduction in 1981. Combining high elevated temperature strength with excellent metallurgical stability, environment-resistance and relatively straight forward fabrication characteristics, this Ni-Cr-W-Mo alloy was an excellent candidate for ASME Pressure vessel Code applications. Coverage under case No. 2063 was granted in July, 1989, for both Section I and Section VIII Division 1 construction. In this paper, the metallurgy of 230 alloy will be described, and its design strength capabilities contrasted with those for more established code materials. Other important performance capabilities, such as long-term thermal stability, oxidation-resistance, fatigue-resistance, and resistance to other forms of environmental degradation will be discussed. It will be shown that the combined properties of 230 alloy offer some significant advantages over other materials for applications such as expansion bellows, heat-exchangers, valves and other components in the fossil energy, nuclear energy and chemical process industries, among others

  14. Modeling the rubbing contact in honeycomb seals

    Science.gov (United States)

    Fischer, Tim; Welzenbach, Sarah; Meier, Felix; Werner, Ewald; kyzy, Sonun Ulan; Munz, Oliver

    2018-03-01

    Metallic honeycomb labyrinth seals are commonly used as sealing systems in gas turbine engines. Because of their capability to withstand high thermo-mechanical loads and oxidation, polycrystalline nickel-based superalloys, such as Hastelloy X and Haynes 214, are used as sealing material. In addition, these materials must exhibit a tolerance against rubbing between the rotating part and the stationary seal component. The tolerance of the sealing material against rubbing preserves the integrity of the rotating part. In this article, the rubbing behavior at the rotor-stator interface is considered numerically. A simulation model is incorporated into the commercial finite element code ABAQUS/explicit and is utilized to simulate a simplified rubbing process. A user-defined interaction routine between the contact surfaces accounts for the thermal and mechanical interfacial behavior. Furthermore, an elasto-plastic constitutive material law captures the extreme temperature conditions and the damage behavior of the alloys. To validate the model, representative quantities of the rubbing process are determined and compared with experimental data from the literature. The simulation results correctly reproduce the observations made on a test rig with a reference stainless steel material (AISI 304). A parametric study using the nickel-based superalloys reveals a clear dependency of the rubbing behavior on the sliding and incursion velocity. Compared to each other, the two superalloys studied exhibit a different rubbing behavior.

  15. Copaifera multijuga ethanolic extracts, oil-resin, and its derivatives display larvicidal activity against Anopheles darlingi and Aedes aegypti (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Frances Tatiane Tavares Trindade

    2013-05-01

    Full Text Available Copaifera spp. is a common tree species found in the tropical region of Latin America, popularly known as copaiba or pau-d'alho. Oil-resin from different Copaifera species and its components present several biological activities such as antimicrobial, anti-inflammatory, antioxidant and insecticidal, including larvicidal activity against mosquitoes. Thus, bark and leaf ethanolic extracts, oil-resin, essential oil and alepterolic acid from Copaifera multijuga Hayne, Fabaceae, were tested as larvicides against the main malaria vector in the north of Brazil, Anopheles darlingi and also Aedes aegypti, the dengue vector. A. darlingi larval mortality was significantly higher than A. aegypti for most tested compounds. Bark and leaf extracts resulted in lower Lethal Concentrations (LC50 values for A. darlingi, 3 and 13 ppm, respectively, while the essential oil provided the lowest LC50 value for A. aegypti, 18 ppm. Despite of that, the lowest LC values were from the alepterolic acid for both species, i.e. 0.9 and 0.7 ppm for A. darlingi and A. aegypti, respectively.

  16. The assessment of the HSR impacts on Spanish tourism: an approach based on multivariate panel data analysis

    Energy Technology Data Exchange (ETDEWEB)

    Guirao Abad, B.

    2016-07-01

    Literature review shows that little research has done so far to estimate how tourism indicators are affected by new HSR lines. In 2012, a multivariate panel analysis developed by Chen and Haynes was applied to the Chinese regions to quantify the HSR impact on tourism output. The Chinese experience confirmed that, during the period 1999-2010, emerging high speed rail services did have significant positive impacts on boosting tourism in China. Since them, no similar empirical tool has ever been tested in Europe. The aim of this paper is to analyze and validate the suitability of this tool to assess empirically the effects of HSR on Spanish tourism during the period 1999-2014, and to enhance the abovementioned model with a tourism database. With more than 20 years’ HSR experience, and operating the longest HSR network in Europe (2,900 km), Spain offers a good scenario for this model application because Spanish tourism sector represents 10.2% of its gross domestic product (GDP). Results clearly show that there is a direct linkage between the evolution of certain Spanish tourism outputs and the construction of the HSR network. However, authors´ recommendations include future new research on some variables limitations like the type of tourism output considered or the consideration. (Author)

  17. The assessment of the HSR impacts on Spanish tourism: an approach based on multivariate panel data analysis

    International Nuclear Information System (INIS)

    Guirao Abad, B.

    2016-01-01

    Literature review shows that little research has done so far to estimate how tourism indicators are affected by new HSR lines. In 2012, a multivariate panel analysis developed by Chen and Haynes was applied to the Chinese regions to quantify the HSR impact on tourism output. The Chinese experience confirmed that, during the period 1999-2010, emerging high speed rail services did have significant positive impacts on boosting tourism in China. Since them, no similar empirical tool has ever been tested in Europe. The aim of this paper is to analyze and validate the suitability of this tool to assess empirically the effects of HSR on Spanish tourism during the period 1999-2014, and to enhance the abovementioned model with a tourism database. With more than 20 years’ HSR experience, and operating the longest HSR network in Europe (2,900 km), Spain offers a good scenario for this model application because Spanish tourism sector represents 10.2% of its gross domestic product (GDP). Results clearly show that there is a direct linkage between the evolution of certain Spanish tourism outputs and the construction of the HSR network. However, authors´ recommendations include future new research on some variables limitations like the type of tourism output considered or the consideration. (Author)

  18. Bimetallic low thermal-expansion panels of Co-base and silicide-coated Nb-base alloys for high-temperature structural applications

    International Nuclear Information System (INIS)

    Rhein, R.K.; Novak, M.D.; Levi, C.G.; Pollock, T.M.

    2011-01-01

    Research highlights: → Low net thermal expansion bimetallic structural lattice constructed. → Temperatures on the order of 1000 deg. C reached. → Improved silicide coating for niobium alloy developed. - Abstract: The fabrication and high temperature performance of low thermal expansion bimetallic lattices composed of Co-base and Nb-base alloys have been investigated. A 2D sheet lattice with a coefficient of thermal expansion (CTE) lower than the constituent materials of construction was designed for thermal cycling to 1000 deg. C with the use of elastic-plastic finite element analyses. The low CTE lattice consisted of a continuous network of the Nb-base alloy C-103 with inserts of high CTE Co-base alloy Haynes 188. A new coating approach wherein submicron alumina particles were incorporated into (Nb, Cr, Fe) silicide coatings was employed for oxidation protection of the Nb-base alloy. Thermal gravimetric analysis results indicate that the addition of submicron alumina particles reduced the oxidative mass gain by a factor of four during thermal cycling, increasing lifetime. Bimetallic cells with net expansion of 6 x 10 -6 /deg. C and 1 x 10 -6 /deg. C at 1000 deg. C were demonstrated and their measured thermal expansion characteristics were consistent with analytical models and finite element analysis predictions.

  19. WebSPIT

    International Nuclear Information System (INIS)

    Wilk, Philip A.

    2001-01-01

    SPIT is an adaptation by John Wild [Wild 1988] of a neutron evaporation code that has been in circulation around LBNL and LLNL. It is a program for calculating fusion product cross sections for reactions that de-excite through neutron emission. It was originally written in FORTRAN for the VAX microcomputer. It is related closely to another neutron evaporation code JORPLE written by Jose Alonso [Alonso 1974]. SPIT uses a different set of potentials and does a better job of reproducing the excitation function shapes than JORPLE, though both predict approximately the same excitation peak energy. The main difference [Haynes 1988] between the two programs is that JORPLE uses a standard Coulomb potential and the Woods-Saxon potential, while SPIT uses a Bondorf, Sobel, and Sperber coulomb potential [Bondorf 1974] and the Bass proximity potential [Bass 1974]. Our group, the Heavy Element Nuclear and Radiochemistry Group, here at LBNL has made extensive use of this code for estimating reaction cross sections for experiments that are to be performed at the 88-Inch cyclotron. It requires no calculation parameters aside from the Z and A of the projectile and target nucleus, and this feature has allowed us to use it in a consistent manner for experiments here for over ten years. The cross sections that are calculated with SPIT are consistently within an order of magnitude of those experimentally observed

  20. THE EFFECTS OF EARNINGS MANAGEMENT ON ACCOUNTING CONSERVATISM MODERATED BY CORPORATE GOVERNANCE MECHANISM (STUDY OF MANUFACTURING COMPANIES LISTEDON INDONESIA STOCK EXCHANGEIN 2008 – 2010

    Directory of Open Access Journals (Sweden)

    AMMAR AL ASYARI

    2013-07-01

    Full Text Available This study aimsto examine earnings management by companies manufacturing in Indonesia affect the choice of managers to implement aconservative accounting policy. With corporate governance mechanisms in influencing the relationship of Earning Management on Accounting Conservatism. Methods of analysis using multiple linear regression analysis with one independent variable, one dependent variable and two variables moderation. Corporate governance mechanismuses two characteristics as moderating variables, managerial ownership and board of commissioners. Size using the accrua lconservatism, according to those used by Givolyand Hayn (2002 and discretionary accruals as aproxy for earnings management is computed using the Modified Jones Model (Dechow etal., 1995. By using the purposive sampling method, the sample in this research consists of 23 manufacturing companies that listed on Indonesia Stock Exchange in 2008 – 2010. This research use secondary data which is collected from the firm’s annual report and financial statements. The result of this research shows that simultaneously, earning management, managerial ownership, and board of commissioners influence accounting conservatism. Partially, only earning management that significantly influences accounting conservatism. While managerial ownership and board of commissioners do not significantly influence the relationship of Earning Management on Accounting Conservatism.

  1. Spectral emissivity measurements of candidate materials for very high temperature reactors

    Energy Technology Data Exchange (ETDEWEB)

    Cao, G.; Weber, S.J.; Martin, S.O.; Anderson, M.H. [Department of Engineering Physics, University of Wisconsin, 1500 Engineering Drive, Madison, WI (United States); Sridharan, K., E-mail: kumars@cae.wisc.edu [Department of Engineering Physics, University of Wisconsin, 1500 Engineering Drive, Madison, WI (United States); Allen, T.R. [Department of Engineering Physics, University of Wisconsin, 1500 Engineering Drive, Madison, WI (United States)

    2012-10-15

    Heat dissipation by radiation is an important consideration in VHTR components, particularly the reactor pressure vessel (RPV), because of the fourth power temperature dependence of radiated heat. Since emissivity is the material property that dictates the ability to radiate heat, measurements of emissivities of materials that are being specifically considered for the construction of VHTR become important. Emissivity is a surface phenomenon and therefore compositional, structural, and topographical changes that occur at the surfaces of these materials as a result of their interactions with the environment at high temperatures will alter their emissivities. With this background, an experimental system for the measurement of spectral emissivity has been designed and constructed. The system has been calibrated in conformance with U.S. DoE quality assurance standards using inert ceramic materials, boron nitride, silicon carbide, and aluminum oxide. The results of high temperature emissivity measurements of potential VHTR materials such as ferritic steels SA 508, T22, T91 and austenitic alloys IN 800H, Haynes 230, IN 617, and 316 stainless steel have been presented.

  2. The topology of large-scale structure. III. Analysis of observations

    International Nuclear Information System (INIS)

    Gott, J.R. III; Weinberg, D.H.; Miller, J.; Thuan, T.X.; Schneider, S.E.

    1989-01-01

    A recently developed algorithm for quantitatively measuring the topology of large-scale structures in the universe was applied to a number of important observational data sets. The data sets included an Abell (1958) cluster sample out to Vmax = 22,600 km/sec, the Giovanelli and Haynes (1985) sample out to Vmax = 11,800 km/sec, the CfA sample out to Vmax = 5000 km/sec, the Thuan and Schneider (1988) dwarf sample out to Vmax = 3000 km/sec, and the Tully (1987) sample out to Vmax = 3000 km/sec. It was found that, when the topology is studied on smoothing scales significantly larger than the correlation length (i.e., smoothing length, lambda, not below 1200 km/sec), the topology is spongelike and is consistent with the standard model in which the structure seen today has grown from small fluctuations caused by random noise in the early universe. When the topology is studied on the scale of lambda of about 600 km/sec, a small shift is observed in the genus curve in the direction of a meatball topology. 66 refs

  3. The topology of large-scale structure. III - Analysis of observations

    Science.gov (United States)

    Gott, J. Richard, III; Miller, John; Thuan, Trinh X.; Schneider, Stephen E.; Weinberg, David H.; Gammie, Charles; Polk, Kevin; Vogeley, Michael; Jeffrey, Scott; Bhavsar, Suketu P.; Melott, Adrian L.; Giovanelli, Riccardo; Hayes, Martha P.; Tully, R. Brent; Hamilton, Andrew J. S.

    1989-05-01

    A recently developed algorithm for quantitatively measuring the topology of large-scale structures in the universe was applied to a number of important observational data sets. The data sets included an Abell (1958) cluster sample out to Vmax = 22,600 km/sec, the Giovanelli and Haynes (1985) sample out to Vmax = 11,800 km/sec, the CfA sample out to Vmax = 5000 km/sec, the Thuan and Schneider (1988) dwarf sample out to Vmax = 3000 km/sec, and the Tully (1987) sample out to Vmax = 3000 km/sec. It was found that, when the topology is studied on smoothing scales significantly larger than the correlation length (i.e., smoothing length, lambda, not below 1200 km/sec), the topology is spongelike and is consistent with the standard model in which the structure seen today has grown from small fluctuations caused by random noise in the early universe. When the topology is studied on the scale of lambda of about 600 km/sec, a small shift is observed in the genus curve in the direction of a 'meatball' topology.

  4. The topology of large-scale structure. III - Analysis of observations. [in universe

    Science.gov (United States)

    Gott, J. Richard, III; Weinberg, David H.; Miller, John; Thuan, Trinh X.; Schneider, Stephen E.

    1989-01-01

    A recently developed algorithm for quantitatively measuring the topology of large-scale structures in the universe was applied to a number of important observational data sets. The data sets included an Abell (1958) cluster sample out to Vmax = 22,600 km/sec, the Giovanelli and Haynes (1985) sample out to Vmax = 11,800 km/sec, the CfA sample out to Vmax = 5000 km/sec, the Thuan and Schneider (1988) dwarf sample out to Vmax = 3000 km/sec, and the Tully (1987) sample out to Vmax = 3000 km/sec. It was found that, when the topology is studied on smoothing scales significantly larger than the correlation length (i.e., smoothing length, lambda, not below 1200 km/sec), the topology is spongelike and is consistent with the standard model in which the structure seen today has grown from small fluctuations caused by random noise in the early universe. When the topology is studied on the scale of lambda of about 600 km/sec, a small shift is observed in the genus curve in the direction of a 'meatball' topology.

  5. Distribution and infestation levels of Crypticerya multicicatrices Kondo and Unruh (Hemiptera: Monophlebidae on San Andrés island

    Directory of Open Access Journals (Sweden)

    Takumasa Kondo Kondo

    2014-01-01

    Full Text Available The fluted scale Crypticerya multicicatrices (Hemiptera: Monophlebidae is an invasive insect that became a major pest on the island of San Andrés. To generate control strategies for this insect, its distribution and infestation levels on palm species, fruit trees, leguminous trees and other plant species were determined during January 14–18, 2013. A total of 96 points were sampled in order to determine the distribution of the insect on the island. During the study, the fluted scale was found distributed throughout the island of San Andrés, including Haynes Cay and Johnny Cay. The palms were the plants with the highest levels of infestation, 70.8% had some degree of infestation (37.5% high infestation levels; followed by fruit trees which had 65.6% with some degree of infestation (30.2% high infestation levels; followed by leguminous trees which had 59.6% with some degree of infestation (13.5% high infestation levels and finally “other hosts” which had 51.1% with some level of infestation (11.5% high infestation levels. This study is the first detailed mapping of C. multicicatrices on the island of San Andrés which will become the basis for future work on the population dynamics of the fluted scale and its distribution on the island.

  6. On the Explicit Expression for Plasma Layer Thickness

    CERN Document Server

    Sharma, R K

    2004-01-01

    The marginal zone theory is used to account for the observed Fahreus Linquist effect when the viscoity of blood changes with the diameter of the capillary. An attributable cause is the axial accumulation of cells. The discharge rate from Hagen Poiseulle law at steady state was derived by Haynes (1960) for the core and plasma layer and a total discharge rate was expressed as a function of the pressure drop along the capillary, quartic dependence on the radius of the capillary and quartic dependence on the dimensionless marginal zone thickness. The apparent of viscosity of the blood is expressed as a function of the ratio of the core layer viscosity and the plasma layer viscosity. In order to back out a marginal zone thickness from a given set of information, the Charm and Kurland expression (1974) for the viscosity and hematocrit variation and the temperature dependence parameter of the hematocrit alpha can be used to develop two transcendental equations and two un! knowns. This is the recommended procedure us...

  7. On a Explicit Expresion for Plasma Layer Thickness

    CERN Document Server

    Sharma, R K

    2004-01-01

    The marginal zone theory is used to account for the observed Fahreus Linquist effect when the viscoity of blood changes with the diameter of the capillary. An attributable cause is the axial accumulation of cells. The discharge rate from Hagen Poiseulle law at steady state was derived by Haynes (1960) for the core and plasma layer and a total discharge rate was expressed as a function of the pressure drop along the capillary, quartic dependence on the radius of the capillary and quartic dependence on the dimensionless marginal zone thickness. The apparent of viscosity of the blood is expressed as a function of the ratio of the core layer viscosity and the plasma layer viscosity. In order to back out a marginal zone thickness from a given set of information, the Charm and Kurland expression (1974) for the viscosity and hematocrit variation and the temperature dependence parameter of the hematocrit alpha can be used to develop two transcendental equations and two un! knowns. This is the recommended procedure us...

  8. Mechanisms of oxide layer formation and destruction on a chromia former nickel base alloy in HTR environment; Mecanismes de formation et de destruction de la couche d'oxyde sur un alliage chrominoformeur en milieu HTR

    Energy Technology Data Exchange (ETDEWEB)

    Rouillard, F

    2007-10-15

    Haynes 230 alloy which contains 22 wt.% chromium could be a promising candidate material for structures and heat exchangers (maximum operating temperature: 850-950 C) in Very High Temperature Reactors (VHTR). The feasibility demonstration involves to valid its corrosion resistance in the reactor specific environment namely impure helium. The alloys surface reactivity was investigated at temperatures between 850 and 1000 C. We especially focused on the influence of different parameters such as concentrations of impurities in the gas phase (carbon monoxide and methane, water vapour/hydrogen ratio), alloy composition (activities of Cr and C, alloying element contents) and temperature. Two main behaviours have been revealed: the formation of a Cr/Mn rich oxide layer at 900 C and its following reduction at higher temperatures. At 900 C, the water vapour is the main oxidizing gas. However in the initial times, the carbon monoxide reacts at the metal/oxide interface which involves a gaseous transport through the scale; CO mainly oxidizes the minor alloying elements aluminium and silicon. Above a critical temperature TA, the carbon in solution in the alloy reduces chromia. To ascribe the scale destruction, a model is proposed based on thermodynamic interfacial data for the alloy, oxide layer morphology and carbon monoxide partial pressure in helium; the model is then validated regarding experimental results and observations. (author)

  9. Gas Turbine High Temperature Gas (Helium) Reactor Using Pebble Bed Fuel Derived from Spent Fuel

    International Nuclear Information System (INIS)

    Cole, Quentin

    2013-01-01

    Project goals: Build on the $1B investment spent during the NGNP Project for the only true Inherently Safe Small Modular Reactor Design – the only SMR design that can make this claim due to negative temperature coefficient of reactivity - no containment required – less construction cost. NPMC in Partnership with Pebble Bed Modular Group, a fully owned subsidiary of Eskom, RSA to Factory Build Complete Plant in Modular Sections at Factory Site in Oswego, NY for transport to site by rail or shipping for world wide export. NPMC will provide Project and Construction Management of all new builds from plant sites through construction, commissioning and startup using local labor. License and Construct ion of spent fuel processing facility in both NY and South Africa using Proven Technology. Ultimate goals of project: 1. Award of the 2013 US DOE Innovative SMR $452M cost share grant for US NRC License Certification 2.Build Full Scale Demonstration Plant at Koeburg, RSA with World Bank Funding managed by NPMC in collaboration with our legal firm, Haynes and Boone LLP 3. Take Plant Orders Immediately (10% Down Payment) 4. Form Strategic Alliance with Domestic and/or International Utility

  10. Kinetics of Grain Growth in 718 Ni-Base Superalloy

    Directory of Open Access Journals (Sweden)

    Huda Z.

    2014-10-01

    Full Text Available The Haynes® 718 Ni-base superalloy has been investigated by use of modern material characterization, metallographic and heat treatment equipment. Grain growth annealing experiments at temperatures in the range of 1050 – 1200 oC (1323–1473K for time durations in the range of 20 min-22h have been conducted. The kinetic equations and an Arrhenius-type equation have been applied to compute the grain-growth exponent n and the activation energy for grain growth, Qg, for the investigated alloy. The grain growth exponent, n, was computed to be in the range of 0.066-0.206; and the n values have been critically discussed in relation to the literature. The activation energy for grain growth, Qg, for the investigated alloy has been computed to be around 440 kJ/mol; and the Qg data for the investigated alloy has been compared with other metals and alloys and ceramics; and critically analyzed in relation to our results.

  11. Modeling Long-term Creep Performance for Welded Nickel-base Superalloy Structures for Power Generation Systems

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Chen [GE Global Research, NIskayuna, NY (United States); Gupta, Vipul [GE Global Research, NIskayuna, NY (United States); Huang, Shenyan [GE Global Research, NIskayuna, NY (United States); Soare, Monica [GE Global Research, NIskayuna, NY (United States); Zhao, Pengyang [GE Global Research, NIskayuna, NY (United States); Wang, Yunzhi [GE Global Research, NIskayuna, NY (United States)

    2017-02-28

    The goal of this project is to model long-term creep performance for nickel-base superalloy weldments in high temperature power generation systems. The project uses physics-based modeling methodologies and algorithms for predicting alloy properties in heterogeneous material structures. The modeling methodology will be demonstrated on a gas turbine combustor liner weldment of Haynes 282 precipitate-strengthened nickel-base superalloy. The major developments are: (1) microstructure-property relationships under creep conditions and microstructure characterization (2) modeling inhomogeneous microstructure in superalloy weld (3) modeling mesoscale plastic deformation in superalloy weld and (4) a constitutive creep model that accounts for weld and base metal microstructure and their long term evolution. The developed modeling technology is aimed to provide a more efficient and accurate assessment of a material’s long-term performance compared with current testing and extrapolation methods. This modeling technology will also accelerate development and qualification of new materials in advanced power generation systems. This document is a final technical report for the project, covering efforts conducted from October 2014 to December 2016.

  12. Impact of selected parameters on the development of boiling and flow resistance in the minichannel

    Directory of Open Access Journals (Sweden)

    Piasecka Magdalena

    2015-01-01

    Full Text Available The paper presents results of flow boiling in a rectangular minichannel 1 mm deep, 40 mm wide and 360 mm long. The heating element for FC-72 flowing in the minichannel was the thin alloy foil designated as Haynes-230. There was a microstructure on the side of the foil which comes into contact with fluid in the channel. Two types of microstructured heating surfaces: one with micro-recesses distributed evenly and another with mini-recesses distributed unevenly were used. The paper compares the impact of the microstructured heating surface and minichannel positions on the development of boiling and two phase flow pressure drop. The local heat transfer coefficients and flow resistance obtained in experiment using three positions of the minichannel, e.g.: 0°, 90° and 180° were analyzed. The study of the selected thermal and flow parameters (mass flux density and inlet pressure, geometric parameters and type of cooling liquid on the boiling heat transfer was also conducted. The most important factor turned out to be channel orientation. Application of the enhanced heating surface caused the increase of the heat transfer coefficient from several to several tens per cent, in relation to the plain surface.

  13. Comparison of two surface temperature measurement using thermocouples and infrared camera

    Directory of Open Access Journals (Sweden)

    Michalski Dariusz

    2017-01-01

    Full Text Available This paper compares two methods applied to measure surface temperatures at an experimental setup designed to analyse flow boiling heat transfer. The temperature measurements were performed in two parallel rectangular minichannels, both 1.7 mm deep, 16 mm wide and 180 mm long. The heating element for the fluid flowing in each minichannel was a thin foil made of Haynes-230. The two measurement methods employed to determine the surface temperature of the foil were: the contact method, which involved mounting thermocouples at several points in one minichannel, and the contactless method to study the other minichannel, where the results were provided with an infrared camera. Calculations were necessary to compare the temperature results. Two sets of measurement data obtained for different values of the heat flux were analysed using the basic statistical methods, the method error and the method accuracy. The experimental error and the method accuracy were taken into account. The comparative analysis showed that although the values and distributions of the surface temperatures obtained with the two methods were similar but both methods had certain limitations.

  14. Determination of the temperature distribution in a minichannel using ANSYS CFX and a procedure based on the Trefftz functions

    Directory of Open Access Journals (Sweden)

    Maciejewska Beata

    2017-01-01

    Full Text Available This work discusses the mathematical model for laminar-flow heat transfer in a minichannel. The boundary conditions in the form of temperature distributions on the outer sides of the channel walls were determined from experimental data. The data were collected from the experimental stand the essential part of which is a vertical minichannel 1.7 mm deep, 16 mm wide and 180 mm long, asymmetrically heated by a Haynes-230 alloy plate. Infrared thermography allowed determining temperature changes on the outer side of the minichannel walls. The problem was analysed numerically through either ANSYS CFX software or special calculation procedures based on the Finite Element Method and Trefftz functions in the thermal boundary layer. The Trefftz functions were used to construct the basis functions. Solutions to the governing differential equations were approximated with a linear combination of Trefftz-type basis functions. Unknown coefficients of the linear combination were calculated by minimising the functional. The results of the comparative analysis were represented in a graphical form and discussed.

  15. A Finite Element Theory for Predicting the Attenuation of Extended-Reacting Liners

    Science.gov (United States)

    Watson, W. R.; Jones, M. G.

    2009-01-01

    A non-modal finite element theory for predicting the attenuation of an extended-reacting liner containing a porous facesheet and located in a no-flow duct is presented. The mathematical approach is to solve separate wave equations in the liner and duct airway and to couple these two solutions by invoking kinematic constraints at the facesheet that are consistent with a continuum theory of fluid motion. Given the liner intrinsic properties, a weak Galerkin finite element formulation with cubic polynomial basis functions is used as the basis for generating a discrete system of acoustic equations that are solved to obtain the coupled acoustic field. A state-of-the-art, asymmetric, parallel, sparse equation solver is implemented that allows tens of thousands of grid points to be analyzed. A grid refinement study is presented to show that the predicted attenuation converges. Excellent comparison of the numerically predicted attenuation to that of a mode theory (using a Haynes 25 metal foam liner) is used to validate the computational approach. Simulations are also presented for fifteen porous plate, extended-reacting liners. The construction of some of the porous plate liners suggest that they should behave as resonant liners while the construction of others suggest that they should behave as broadband attenuators. In each case the finite element theory is observed to predict the proper attenuation trend.

  16. A critique of Katz's 'High LET constraint on low LET survival'

    International Nuclear Information System (INIS)

    Burch, P.R.J.; Chesters, M.S.

    1979-01-01

    Katz's interpretation of the connexion between RBE and LET is contrasted with a version published previously by Burch. The implications of Katz's model for dose-response relations apply only at ultra-high absorbed doses in Burch's model. In the latter, the shoulder on type-C survival curves for mammalian cells is explained in terms of Haynes' repair model. Under certain conditions the repair model becomes mathematically equivalent to the α-β model; under some other conditions it becomes equivalent to the 'two-component' model. The formulation of a new repair hypothesis, based on the idea of an inducible repair mechanism, is also set out. It is argued that Katz's supralinearity index' is appropriate to the induction of (rare) mutations but inappropriate to cell survival, for which an alternative index is proposed. Certain plausible hypotheses of radiobiological action conflict with Katz's 'logical constraint' which, it is contended, is neither logical nor valid. In conclusion, although experimental findings for some radiobiological systems conform to Katz's 'constraint', the frequently observed violations should not necessarily be regarded as artefacts. (author)

  17. Tourette's syndrome and associated disorders: a systematic review

    Directory of Open Access Journals (Sweden)

    Bárbara R. Ferreira

    2014-09-01

    Full Text Available Objective: To compile data on Tourette's syndrome (TS, tics and associated disorders.Methods: A systematic review of the literature was conducted using the 5S levels of organization of healthcare research evidence (systems, summaries, synopses, syntheses, studies, based on the model described by Haynes. The search keywords were Tourette, tics and comorbidity, which were cross-referenced. Studies provided by publishers and articles being processed on July 31, 2013, were also included.Results: Of all studies retrieved during the search, 64 were selected because they analyzed the epidemiology, clinical features and etiopathogenesis of TS and its comorbidities. TS is classified as a hyperkinetic movement disorder, and at least 90% of the patients have neuropsychiatric comorbidities, of which attention deficit hyperactivity and obsessive-compulsive disorders are the most common. The syndrome is clinically heterogeneous and has been associated with a dysfunction of cortico-striatal-thalamic-cortical circuits involving various neurotransmitters. Although its genetic etiology has been widely studied, other factors may be important to understand this syndrome and its associated disorders.Conclusions: TS is a neurodevelopmental disorder that results from the impact of stress factors on a vulnerable biological substrate during the critical periods of neurodevelopment. The study of TS and its comorbidities may contribute, at different levels, to the understanding of several neuropsychiatric disorders of clinical and therapeutic relevance.

  18. Magnetic field and dielectric environment effects on an exciton trapped by an ionized donor in a spherical quantum dot

    Science.gov (United States)

    Aghoutane, N.; Feddi, E.; El-Yadri, M.; Bosch Bailach, J.; Dujardin, F.; Duque, C. A.

    2017-11-01

    Magnetic field and host dielectric environment effects on the binding energy of an exciton trapped by an ionized donor in spherical quantum dot are investigated. In the framework of the effective mass approximation and by using a variational method, the calculations have been performed by developing a robust ten-terms wave function taking into account the different inter-particles correlations and the distortion of symmetry induced by the orientation of the applied magnetic field. The binding and the localization energies are determined as functions of dot size and magnetic field strength. It appears that the variation of magnetic shift obeys a quadratic law for low magnetic fields regime while, for strong magnetic fields, this shift tends to be linear versus the magnetic field strength. The stability of this complex subjected to a magnetic field is also discussed according to the electron-hole ratio and the dielectric constant of the surrounding medium. A last point to highlight is that the Haynes' rule remains valid even in the presence of an applied magnetic field.

  19. Supercritical boiler material selection using fuzzy analytic network process

    Directory of Open Access Journals (Sweden)

    Saikat Ranjan Maity

    2012-08-01

    Full Text Available The recent development of world is being adversely affected by the scarcity of power and energy. To survive in the next generation, it is thus necessary to explore the non-conventional energy sources and efficiently consume the available sources. For efficient exploitation of the existing energy sources, a great scope lies in the use of Rankin cycle-based thermal power plants. Today, the gross efficiency of Rankin cycle-based thermal power plants is less than 28% which has been increased up to 40% with reheating and regenerative cycles. But, it can be further improved up to 47% by using supercritical power plant technology. Supercritical power plants use supercritical boilers which are able to withstand a very high temperature (650-720˚C and pressure (22.1 MPa while producing superheated steam. The thermal efficiency of a supercritical boiler greatly depends on the material of its different components. The supercritical boiler material should possess high creep rupture strength, high thermal conductivity, low thermal expansion, high specific heat and very high temperature withstandability. This paper considers a list of seven supercritical boiler materials whose performance is evaluated based on seven pivotal criteria. Given the intricacy and difficulty of this supercritical boiler material selection problem having interactions and interdependencies between different criteria, this paper applies fuzzy analytic network process to select the most appropriate material for a supercritical boiler. Rene 41 is the best supercritical boiler material, whereas, Haynes 230 is the worst preferred choice.

  20. Copaifera multijuga ethanolic extracts, oil-resin, and its derivatives display larvicidal activity against Anopheles darlingi and Aedes aegypti (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Frances Tatiane Tavares Trindade

    2013-06-01

    Full Text Available Copaifera spp. is a common tree species found in the tropical region of Latin America, popularly known as copaiba or pau-d'alho. Oil-resin from different Copaifera species and its components present several biological activities such as antimicrobial, anti-inflammatory, antioxidant and insecticidal, including larvicidal activity against mosquitoes. Thus, bark and leaf ethanolic extracts, oil-resin, essential oil and alepterolic acid from Copaifera multijuga Hayne, Fabaceae, were tested as larvicides against the main malaria vector in the north of Brazil, Anopheles darlingi and also Aedes aegypti, the dengue vector. A. darlingi larval mortality was significantly higher than A. aegypti for most tested compounds. Bark and leaf extracts resulted in lower Lethal Concentrations (LC50 values for A. darlingi, 3 and 13 ppm, respectively, while the essential oil provided the lowest LC50 value for A. aegypti, 18 ppm. Despite of that, the lowest LC values were from the alepterolic acid for both species, i.e. 0.9 and 0.7 ppm for A. darlingi and A. aegypti, respectively.

  1. Mechanisms of oxide layer formation and destruction on a chromia former nickel base alloy in HTR environment

    International Nuclear Information System (INIS)

    Rouillard, F.

    2007-10-01

    Haynes 230 alloy which contains 22 wt.% chromium could be a promising candidate material for structures and heat exchangers (maximum operating temperature: 850-950 C) in Very High Temperature Reactors (VHTR). The feasibility demonstration involves to valid its corrosion resistance in the reactor specific environment namely impure helium. The alloys surface reactivity was investigated at temperatures between 850 and 1000 C. We especially focused on the influence of different parameters such as concentrations of impurities in the gas phase (carbon monoxide and methane, water vapour/hydrogen ratio), alloy composition (activities of Cr and C, alloying element contents) and temperature. Two main behaviours have been revealed: the formation of a Cr/Mn rich oxide layer at 900 C and its following reduction at higher temperatures. At 900 C, the water vapour is the main oxidizing gas. However in the initial times, the carbon monoxide reacts at the metal/oxide interface which involves a gaseous transport through the scale; CO mainly oxidizes the minor alloying elements aluminium and silicon. Above a critical temperature TA, the carbon in solution in the alloy reduces chromia. To ascribe the scale destruction, a model is proposed based on thermodynamic interfacial data for the alloy, oxide layer morphology and carbon monoxide partial pressure in helium; the model is then validated regarding experimental results and observations. (author)

  2. Re-analysis of a banding study to test the effects of an experimental increase in bag limits of mourning doves

    Science.gov (United States)

    Otis, D.L.; White, Gary C.

    2002-01-01

    In 1966-1971, eastern US states with hunting seasons on mourning doves (Zenaida macroura) participated in a study designed to estimate the effects of bag limit increases on population survival rates. More than 400 000 adult and juvenile birds were banded and released during this period, and subsequent harvest and return of bands, together with total harvest estimates from mail and telephone surveys of hunters, provided the database for analysis. The original analysis used an ANOVA framework, and resulted in inferences of no effect of bag limit increase on population parameters (Hayne 1975). We used a logistic regression analysis to infer that the bag limit increase did not cause a biologically significant increase in harvest rate and thus the experiment could not provide any insight into the relationship between harvest and annual survival rates. Harvest rate estimates of breeding populations from geographical subregions were used as covariates in a Program MARK analysis and revealed an association between annual survival and harvest rates, although this relationship is potentially confounded by a latitudinal gradient in survival rates of dove populations. We discuss methodological problems encountered in the analysis of these data, and provide recommendations for future studies of the relationship between harvest and annual survival rates of mourning dove populations.

  3. The Mediating Role of Job Stress on The Effect of Mobbing on Burnout: An Analysis of Social Security Organization Employees in The District of Ankara

    Directory of Open Access Journals (Sweden)

    Yücel Erol

    2015-06-01

    Full Text Available In this study, due to the influence of Mobbing (MO on Burnout (BU, the mediating role of Job Stress (JS on employees is examined. Hence, 826 employees of public and private institutions in Ankara were included in the sample. The data obtained by a questionnaire that prepared by Leymann (1996’s MO scale, and Maslach (1981's BU scale and Haynes (1996's JS scale. Data was evaluated by using One-Way ANOVA, correlation, regression, and multiple regression SPSS. As can be seen from the results of research, applied and perceived MO has a significant impact on employees' JS’s levels and becomes effective in the creation of JS. On the other hand, BU syndrome were seen as a consequence of the resulting JS. These conditions affect each other and existence of one within the organizational structure, results emergence of the other two. Therefore, management of organization, all levels of managers, and employees as individuals should be aware of these psychological states and conduct studies aimed for its prevention.In this research, meaningful relationships have been identified in the mediating role of JS at the impact of MO on BU. On the other hand in terms of demographic variables, significant variations were found in the levels of MO, BU, and JS

  4. Congenital pyeloureteral junction stenosis -postoperative follow-up with MDCT urography

    International Nuclear Information System (INIS)

    Al-Amin, M.

    2012-01-01

    Full text: 30-year-old male patient with asymptomatic congenital hydronephrosis of the left kidney detected on routine ultrasound investigation in relation to haematemesis 7 years ago. It is established a pyeloureteral junction stenosis and has made a resection of the stenotic part of the segment with a further plastic by Anderson - Haynes - Kuester. The histological analysis of resected area found expressed muscle layer and chronic inflammatory infiltrates as same as the in miofibroepithel disembriogenesis. After that, there was a recidive of the hydronephrosis and a further replastic and endopyeloplastic surgery performed in Germany in 2008. Two years after that with multislice computed tomography and computed tomography urography showing recurrence of the disease. Hydronephrosis is nonobstructive, asymptomatic, with no gallstones visualized along the left ureter. There is a delayed drainage function of the left kidney, which does not separate contrast medium in the 60th minute of computed tomography urography. The diagnosis of the condition is a nonobstructive hydronephrosis recidive of the left kidney. There are no aberrant renal arteries or renal arteries stenosis on postprocessing imaging

  5. Characterization for fusion first-wall damage studies of using tailored D-T neutron fields

    International Nuclear Information System (INIS)

    Dierckx, R.; Emigh, C.R.

    1979-01-01

    The approximation required to apply the Bullough-Haynes results to the present calculations is somewhat crude and may imply that the details of the results contain considerable error. However, when the results for each neutron source are viewed in a relative context, several valid and important observations can be made. The almost identical swelling results obtained for the intense neutron source (INS) with a standard blanket and the fusion first wall are most striking. A further comparison with a fusion reactor shows that even the spatial and energy distributions of the neutron flux are similar. In both the INS with blanket and at the first wall of a fusion reactor, there is a radial source flux component of 14-MeV neutrons and a more or less isotropic flux component of low energy (< 14-MeV) neutrons. One must therefore conclude that from the point-of-view of neutron radiation damage, the INS with a blanket, unlike all other types of neutron sources, is not a simulation environment. It is, in fact, a small scale fusion device, and data obtained from INS irradiation experiments would represent fusion reactor results. Such data could then be used to develop correlative procedures for applying data obtained from other simulation sources to fusion reactor conditions

  6. Anticipatory eye movements and long-term memory in early infancy.

    Science.gov (United States)

    Wong-Kee-You, Audrey M B; Adler, Scott A

    2016-11-01

    Advances in our understanding of long-term memory in early infancy have been made possible by studies that have used the Rovee-Collier's mobile conjugate reinforcement paradigm and its variants. One function that has been attributed to long-term memory is the formation of expectations (Rovee-Collier & Hayne, 1987); consequently, a long-term memory representation should be established during expectation formation. To examine this prediction and potentially open the door on a new paradigm for exploring infants' long-term memory, using the Visual Expectation Paradigm (Haith, Hazan, & Goodman, 1988), 3-month-old infants were trained to form an expectation for predictable color and spatial information of picture events and emit anticipatory eye movements to those events. One day later, infants' anticipatory eye movements decreased in number relative to the end of training when the predictable colors were changed but not when the spatial location of the predictable color events was changed. These findings confirm that information encoded during expectation formation are stored in long-term memory, as hypothesized by Rovee-Collier and colleagues. Further, this research suggests that eye movements are potentially viable measures of long-term memory in infancy, providing confirmatory evidence for early mnemonic processes. © 2016 Wiley Periodicals, Inc.

  7. Mechanical Property and Its Comparison of Superalloys for High Temperature Gas Cooled Reactor

    International Nuclear Information System (INIS)

    Kim, Woo Gon; Kim, D. W.; Ryu, W. S.; Han, C. H.; Yoon, J. H.; Chang, J.

    2005-01-01

    Since structural materials for high temperature gas cooled reactor are used during long period in nuclear environment up to 1000 .deg. C, it is important to have good properties at elevated temperature such as mechanical properties (tensile, creep, fatigue, creep-fatigue), microstructural stability, interaction between metal and gas, friction and wear, hydrogen and tritium permeation, irradiation behavior, corrosion by impurity in He. Thus, in order to select excellent materials for the high temperature gas cooled reactor, it is necessary to understand the material properties and to gather the data for them. In this report, the items related to material properties which are needed for designing the high temperature gas cooled reactor were presented. Mechanical properties; tensile, creep, and fatigue etc. were investigated for Haynes 230, Hastelloy-X, In 617 and Alloy 800H, which can be used as the major structural components, such as intermediate heat exchanger (IHX), hot duct and piping and internals. Effect of He and irradiation on these structural materials was investigated. Also, mechanical properties; physical properties, tensile properties, creep and creep crack growth rate were compared for them, respectively. These results of this report can be used as important data to select superior materials for high temperature gas reactor

  8. Max Phase Materials And Coatings For High Temperature Heat Transfer Applications

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Rodriguez, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Garcia-Diaz, B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Olson, L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fuentes, R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Sindelar, R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-10-19

    Molten salts have been used as heat transfer fluids in a variety of applications within proposed Gen IV nuclear designs and in advanced power system such as Concentrating Solar Power (CSP). However, operating at elevated temperatures can cause corrosion in many materials. This work developed coating technologies for MAX phase materials on Haynes-230 and characterized the corrosion of the coatings in the presence of commercial MgCl2-KCl molten salt. Cold spraying of Ti2AlC and physical vapor deposition (PVD) of Ti2AlC or Zr2AlC were tested to determine the most effective form of coating MAX phases on structural substrates. Corrosion testing at 850°C for 100 hrs showed that 3.9 μm Ti2AlC by PVD was slightly protective while 117 μm Ti2AlC by cold spray and 3.6 μm Zr2AlC by PVD were completely protective. None of the tests showed decomposition of the coating (Ti or Zr) into the salt

  9. The role of verbal labels on flexible memory retrieval at 12-months of age.

    Science.gov (United States)

    Taylor, Gemma; Liu, Hao; Herbert, Jane S

    2016-11-01

    The provision of verbal labels enhances 12-month-old infants' memory flexibility across a form change in a puppet imitation task (Herbert, 2011), although the mechanisms for this effect remain unclear. Here we investigate whether verbal labels can scaffold flexible memory retrieval when task difficulty increases and consider the mechanism responsible for the effect of language cues on early memory flexibility. Twelve-month-old infants were provided with English, Chinese, or empty language cues during a difficult imitation task, a combined change in the puppet's colour and form at the test (Hayne et al., 1997). Imitation performance by infants in the English language condition only exceeded baseline performance after the 10-min delay. Thus, verbal labels facilitated flexible memory retrieval on this task. There were no correlations between infants' language comprehension and imitation performance. Thus, it is likely that verbal labels facilitate both attention and categorisation during encoding and retrieval. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  10. Long-term Transfer of Learning from Books and Videos during Toddlerhood

    Science.gov (United States)

    Brito, Natalie; Barr, Rachel; McIntyre, Paula; Simcock, Gabrielle

    2011-01-01

    Television viewing and picture book reading are prevalent activities during toddlerhood and research has shown that toddlers can imitate from both books and videos after short delays (Barr & Hayne, 1999; Simcock & DeLoache, 2006). This is the first study to directly compare toddlers’ long-term retention rates for target actions learned from a video or book. Toddlers (N = 158) aged 18- and 24-months saw an experimenter demonstrating how to make a novel 3-step toy rattle via a pre-recorded video or a picture book. The toddlers’ imitation of the target actions was tested after a specific delay (e.g., 2 weeks, 4 weeks) and their performance was compared to that of age-matched controls who did not see a demonstration. The 18-month-olds retained the target actions for 2 weeks, exhibiting forgetting at 4 weeks, whereas the 24-month-olds retained the information for up to 4 weeks, exhibiting forgetting at 8 weeks. Retention rates for books and videos did not differ at either age. These findings demonstrate very impressive retention from a brief 2D media demonstration and they contribute to our overall understanding of long-term memory processes during infancy. PMID:21911223

  11. Mechanical properties of Ni-base superalloys in high temperature steam environments

    International Nuclear Information System (INIS)

    Jang, Changheui; Kim, Donghoon; Sah, Injin; Lee, Ho Jung

    2015-01-01

    The effects of environmental damages on the mechanical properties of Ni-base superalloys, Alloy 617 and Haynes 230, were evaluated for VHTR-HTSE applications. Tensile tests were carried out at room temperature after ageing at 900 deg. C in vacuum, steam, and steam + 20 vol.% H2 environments up to 3 000 h. Also, creep rupture test were performed in air, steam, and steam + 20 vol.% H2 environments. The degradations such as oxidation, decarburization, and redistribution of carbides were studied in view of the interaction of materials with the environment. During the long-term ageing at 900 deg. C in vacuum, secondary phases such as M23C6 and M6C were precipitated and coarsened, which caused increase in tensile strength and decrease in ductility. For the specimens aged in steam environments, surface and internal oxides acted as preferential sites for crack initiation and consequently, decreased the tensile and creep strength. Also, the formation of decarburization region resulted in glide plane failure during tensile test and reduction in creep rupture life due to grain boundary migration and recrystallisation. During creep tests, tensile stress caused the crack and void formation in oxide layer. Consequently, fast diffusion of oxidant occurred and environmental damage were accelerated. Among the test conditions, such environmental damage was much severe in steam environments. (authors)

  12. Irradiation effects on low-friction coatings for LMFBR applications

    International Nuclear Information System (INIS)

    Ward, A.L.; Johnson, R.N.; Guthrie, G.L.; Aungst, R.C.

    1975-11-01

    A variety of wear-resistant low-friction materials has been irradiated in the EBR-II in order to assess their reponse to LMFBR environments. Pre- and postirradiation testing and examination efforts have concentrated on candidate materials for application to the wear pads on FTR ducts (fuel, control, and reflector assemblies), and a significant result has been qualification of a proprietary detonation-gun-applied chromium carbide coating which employs a Ni Cr binder. Additional materials such as Inconel-718, Haynes-273, aluminides, and various chromium carbide/binder combinations, and other application processes such as plasma-spray, weld-overlays, diffusion bonding and explosive bonding, have also been studied. The most detailed examinations were conducted on selected chromium carbide coatings and included visual inspection, weight and dimensional measurements, metallography, electron microprobe, epoxy-lift-off, and x-ray diffraction analysis. Chromium carbide coatings applied by the detonation-gun process have demonstrated a marked superiority to those applied by plasma-spray techniques

  13. Cannabis use and dating violence among college students: A call for research.

    Science.gov (United States)

    Shorey, Ryan C; Haynes, Ellen; Strauss, Catherine; Temple, Jeff R; Stuart, Gregory L

    2017-01-01

    Dating violence is a serious and prevalent problem on college campuses. Although there is a robust literature documenting that alcohol use is consistently associated with increased risk for perpetrating dating violence, little research has examined the role of cannabis in dating violence perpetration. With increasing legalisation of cannabis throughout the world, it is imperative to understand what role, if any, cannabis may play in the important public health problem of dating violence. In this commentary, we discuss the current state of the research on cannabis and dating violence and suggest avenues for additional research in this area. It is critical that we conduct methodologically sound research on the association between cannabis and dating violence so that we can understand what role, if any, cannabis exerts on this important problem. [Shorey RC, Haynes E, Strauss C, Temple JR, Stuart GL. Cannabis use and dating violence among college students: A call for research. Drug Alcohol Rev 2017;36:17-19]. © 2017 Australasian Professional Society on Alcohol and other Drugs.

  14. Chronic nailbiting: a controlled comparison of competing response and mild aversion treatments.

    Science.gov (United States)

    Allen, K W

    1996-03-01

    Recent studies have suggested that competing response, an abridged version of Azrin and Nunn's (1973) habit reversal method (Behaviour Research and Therapy, 11, 619-628), is a key component in the treatment of chronic nailbiting (Horne & Wilkinson, 1980, Behaviour Research and Therapy, 18, 287-291; Silber & Haynes, 1992, Behaviour Research and Therapy, 30, 15-22). This study replicated and extended the latter by adding an 8 week follow-up period and by using a non-student sample. Forty-five chronic nailbiter Ss were divided into three experimental groups. One method involved the use of mild aversion in which Ss painted a bitter substance on their nails. A second method required the subject to perform a competing response whenever they had the urge to nailbite or found themselves biting their nails. Both methods included self-monitoring of the behaviour and a third group of Ss performed self-monitoring alone as a control condition. The study lasted 12 weeks. Mild aversion resulted in significant improvements in nail length, with the competing response method just failing to show significance in this regard. There was no significant improvement for the control group. The implications for further study and the benefits of competing response in the light of these findings are discussed in terms of treatment success and use of therapist time.

  15. High-resolution photoluminescence spectroscopy of Sn-doped ZnO single crystals

    International Nuclear Information System (INIS)

    Kumar, E. Senthil; Mohammadbeigi, F.; Boatner, L.A.; Watkins, S.P.

    2016-01-01

    Group IV donors in ZnO are poorly understood, despite evidence that they are effective n-type dopants. Here we present high-resolution photoluminescence (PL) spectroscopy studies of unintentionally doped and Sn-doped ZnO single crystals grown by the chemical vapor transport method. Doped samples showed greatly increased emission from the I 10 bound exciton transition that was recently proven to be related to the incorporation of Sn impurities based on radio-isotope studies. The PL linewidths are exceptionally sharp for these samples, enabling a clear identification of several donor species. Temperature-dependent PL measurements of the I 10 line emission energy and intensity dependence reveal a behavior that is similar to other shallow donors in ZnO. Ionized donor bound-exciton and two-electron satellite transitions of the I 10 transition are unambiguously identified and yield a donor binding energy of 71 meV. In contrast to recent reports of Ge-related donors in ZnO, the spectroscopic binding energy for the Sn-related donor bound exciton follows a linear relationship with donor binding energy (Haynes rule) similar to recently observed carbon related donors, and confirming the shallow nature of this defect center, which was recently attributed to a Sn Zn double donor compensated by an unknown single acceptor.

  16. The paired-domination and the upper paired-domination numbers of graphs

    Directory of Open Access Journals (Sweden)

    Włodzimierz Ulatowski

    2015-01-01

    Full Text Available In this paper we continue the study of paired-domination in graphs. A paired-dominating set, abbreviated PDS, of a graph \\(G\\ with no isolated vertex is a dominating set of vertices whose induced subgraph has a perfect matching. The paired-domination number of \\(G\\, denoted by \\(\\gamma_{p}(G\\, is the minimum cardinality of a PDS of \\(G\\. The upper paired-domination number of \\(G\\, denoted by \\(\\Gamma_{p}(G\\, is the maximum cardinality of a minimal PDS of \\(G\\. Let \\(G\\ be a connected graph of order \\(n\\geq 3\\. Haynes and Slater in [Paired-domination in graphs, Networks 32 (1998, 199-206], showed that \\(\\gamma_{p}(G\\leq n-1\\ and they determine the extremal graphs \\(G\\ achieving this bound. In this paper we obtain analogous results for \\(\\Gamma_{p}(G\\. Dorbec, Henning and McCoy in [Upper total domination versus upper paired-domination, Questiones Mathematicae 30 (2007, 1-12] determine \\(\\Gamma_{p}(P_n\\, instead in this paper we determine \\(\\Gamma_{p}(C_n\\. Moreover, we describe some families of graphs \\(G\\ for which the equality \\(\\gamma_{p}(G=\\Gamma_{p}(G\\ holds.

  17. Reliability and validity of clinical tests to assess the anatomical integrity of the cervical spine in adults with neck pain and its associated disorders: Part 1-A systematic review from the Cervical Assessment and Diagnosis Research Evaluation (CADRE) Collaboration.

    Science.gov (United States)

    Lemeunier, Nadège; da Silva-Oolup, S; Chow, N; Southerst, D; Carroll, L; Wong, J J; Shearer, H; Mastragostino, P; Cox, J; Côté, E; Murnaghan, K; Sutton, D; Côté, P

    2017-09-01

    To determine the reliability and validity of clinical tests to assess the anatomical integrity of the cervical spine in adults with neck pain and its associated disorders. We updated the systematic review of the 2000-2010 Bone and Joint Decade Task Force on Neck Pain and its Associated Disorders. We also searched the literature to identify studies on the reliability and validity of Doppler velocimetry for the evaluation of cervical arteries. Two independent reviewers screened and critically appraised studies. We conducted a best evidence synthesis of low risk of bias studies and ranked the phases of investigations using the classification proposed by Sackett and Haynes. We screened 9022 articles and critically appraised 8 studies; all 8 studies had low risk of bias (three reliability and five validity Phase II-III studies). Preliminary evidence suggests that the extension-rotation test may be reliable and has adequate validity to rule out pain arising from facet joints. The evidence suggests variable reliability and preliminary validity for the evaluation of cervical radiculopathy including neurological examination (manual motor testing, dermatomal sensory testing, deep tendon reflexes, and pathological reflex testing), Spurling's and the upper limb neurodynamic tests. No evidence was found for doppler velocimetry. Little evidence exists to support the use of clinical tests to evaluate the anatomical integrity of the cervical spine in adults with neck pain and its associated disorders. We found preliminary evidence to support the use of the extension-rotation test, neurological examination, Spurling's and the upper limb neurodynamic tests.

  18. Effect of solute atoms on glass-forming ability for Fe–Y–B alloy: An ab initio molecular dynamics study

    International Nuclear Information System (INIS)

    Han, J.J.; Wang, W.Y.; Liu, X.J.; Wang, C.P.; Hui, X.D.; Liu, Z.K.

    2014-01-01

    The glass-forming abilities of Fe 78 B 22 , Fe 70 Y 6 B 24 , Fe 72 Y 6 B 22 and Fe 72.5 Y 3.5 B 24 alloys were characterized comprehensively using ab initio molecular dynamics simulations. The calculated results were correlated with the properties and atomic structures. It was found that the Fe 72 Y 6 B 22 alloy consists of both the most stable and the least deformed body centered cubic atomic packing structures in the supercooled liquid and glassy states. It was observed that the local compositions in the Fe 72 Y 6 B 22 alloy significantly deviate from the compositions of stable crystalline phases, indicating that the Fe 72 Y 6 B 22 alloy has the best glass-forming ability among the alloys studied. However, Fe 72 Y 6 B 22 alloy has two flaws in terms of glass-forming ability, i.e. relatively large atomic diffusivity and insufficiently close atomic packing. The best performance in these two aspects is observed in the Fe 72.5 Y 3.5 B 24 alloy. Thus, the theoretical study predicts that the best glass former for the Fe–Y–B system is within the compositional range of 22–24 at.% B and 3.5–6 at.% Y

  19. In vivo biomechanical evaluation of a novel angle-stable interlocking nail design in a canine tibial fracture model.

    Science.gov (United States)

    Déjardin, Loïc M; Cabassu, Julien B; Guillou, Reunan P; Villwock, Mark; Guiot, Laurent P; Haut, Roger C

    2014-03-01

    To compare clinical outcome and callus biomechanical properties of a novel angle stable interlocking nail (AS-ILN) and a 6 mm bolted standard ILN (ILN6b) in a canine tibial fracture model. Experimental in vivo study. Purpose-bred hounds (n = 11). A 5 mm mid-diaphyseal tibial ostectomy was stabilized with an AS-ILN (n = 6) or an ILN6b (n = 5). Orthopedic examinations and radiographs were performed every other week until clinical union (18 weeks). Paired tibiae were tested in torsion until failure. Callus torsional strength and toughness were statistically compared and failure mode described. Total and cortical callus volumes were computed and statistically compared from CT slices of the original ostectomy gap. Statistical significance was set at P dogs (P dogs by 10 weeks and in 3/5 ILN6b dogs at 18 weeks. Callus mechanical properties were significantly greater in AS-ILN than ILN6b specimens by 77% (failure torque) and 166% (toughness). Failure occurred by acute spiral (control and AS-ILN) or progressive transverse fractures (ILN6b). Cortical callus volume was 111% greater in AS-ILN than ILN6b specimens (P < .05). Earlier functional recovery, callus strength and remodeling suggest that the AS-ILN provides a postoperative biomechanical environment more conducive to bone healing than a comparable standard ILN. © Copyright 2014 by The American College of Veterinary Surgeons.

  20. Tribocorrosion in pressurized high temperature water: a mass flow model based on the third body approach

    Energy Technology Data Exchange (ETDEWEB)

    Guadalupe Maldonado, S.

    2014-07-01

    Pressurized water reactors (PWR) used for power generation are operated at elevated temperatures (280-300 °C) and under higher pressure (120-150 bar). In addition to these harsh environmental conditions some components of the PWR assemblies are subject to mechanical loading (sliding, vibration and impacts) leading to undesirable and hardly controllable material degradation phenomena. In such situations wear is determined by the complex interplay (tribocorrosion) between mechanical, material and physical-chemical phenomena. Tribocorrosion in PWR conditions is at present little understood and models need to be developed in order to predict component lifetime over several decades. The goal of this project, carried out in collaboration with the French company AREVA NP, is to develop a predictive model based on the mechanistic understanding of tribocorrosion of specific PWR components (stainless steel control assemblies, stellite grippers). The approach taken here is to describe degradation in terms of electro-chemical and mechanical material flows (third body concept of tribology) from the metal into the friction film (i.e. the oxidized film forming during rubbing on the metal surface) and from the friction film into the environment instead of simple mass loss considerations. The project involves the establishment of mechanistic models for describing the single flows based on ad-hoc tribocorrosion measurements operating at low temperature. The overall behaviour at high temperature and pressure in investigated using a dedicated tribometer (Aurore) including electrochemical control of the contact during rubbing. Physical laws describing the individual flows according to defined mechanisms and as a function of defined physical parameters were identified based on the obtained experimental results and from literature data. The physical laws were converted into mass flow rates and solved as differential equation system by considering the mass balance in compartments