Spatiotemporal Evolution of Hanle and Zeeman Synthetic Polarization in a Chromospheric Spectral Line

Energy Technology Data Exchange (ETDEWEB)

Carlin, E. S.; Bianda, M., E-mail: escarlin@irsol.es [Istituto Ricerche Solari Locarno, 6600, Locarno, Switzerland, associated to USI, Università della Svizzera Italiana (Switzerland)

2017-07-01

Due to the quick evolution of the solar chromosphere, its magnetic field cannot be inferred reliably without accounting for the temporal variations of its polarized light. This has been broadly overlooked in the modeling and interpretation of the polarization, due to technical problems (e.g., lack of temporal resolution or of time-dependent MHD solar models) and/or because many polarization measurements can apparently be explained without dynamics. Here, we show that the temporal evolution is critical for explaining the spectral-line scattering polarization because of its sensitivity to rapidly varying physical quantities and the possibility of signal cancellations and attenuation during extended time integration. For studying the combined effect of time-varying magnetic fields and kinematics, we solved the 1.5D non-LTE problem of the second kind in time-dependent 3D R-MHD solar models and synthesized the Hanle and Zeeman polarization in forward scattering for the chromospheric λ 4227 line. We find that the quiet-Sun polarization amplitudes depend on the periodicity and spectral coherence of the signal enhancements produced by kinematics, but that substantially larger linear polarization signals should exist all over the solar disk for short integration times. The spectral morphology of the polarization is discussed as a combination of Hanle, Zeeman, partial redistribution and dynamic effects. We give physical references for observations by degrading and characterizing our slit time series in different spatiotemporal resolutions. The implications of our results for the interpretation of the second solar spectrum and for the investigation of the solar atmospheric heatings are discussed.

Tuning of the Hanle effect from EIT to EIA using spatially separated probe and control beams.

Science.gov (United States)

Bhattarai, Mangesh; Bharti, Vineet; Natarajan, Vasant

2018-05-14

We demonstrate a technique for continuous tuning of the Hanle effect from electromagnetically induced transparency (EIT) to electromagnetically induced absorption (EIA) by changing the polarization ellipticity of a control beam. In contrast to previous work in this field, we use spatially separated probe and control beams. The experiments are done using magnetic sublevels of the F g  = 4 → F e  = 5 closed hyperfine transition in the 852 nm D 2 line of 133 Cs. The atoms are contained in a room temperature vapor cell with anti-relaxation (paraffin) coating on the walls. The paraffin coating is necessary for the atomic coherence to be transported between the beams. The experimental results are supported by a density-matrix analysis of the system, which also explains the observed amplitude and zero-crossing of the resonances. Such continuous tuning of the sign of a resonance has important applications in quantum memory and other precision measurements.

Magnetic Field-Vector Measurements in Quiescent Prominences via the Hanle Effect: Analysis of Prominences Observed at Pic-Du-Midi and at Sacramento Peak

Science.gov (United States)

Bommier, V.; Leroy, J. L.; Sahal-Brechot, S.

1985-01-01

The Hanle effect method for magnetic field vector diagnostics has now provided results on the magnetic field strength and direction in quiescent prominences, from linear polarization measurements in the He I E sub 3 line, performed at the Pic-du-Midi and at Sacramento Peak. However, there is an inescapable ambiguity in the field vector determination: each polarization measurement provides two field vector solutions symmetrical with respect to the line-of-sight. A statistical analysis capable of solving this ambiguity was applied to the large sample of prominences observed at the Pic-du-Midi (Leroy, et al., 1984); the same method of analysis applied to the prominences observed at Sacramento Peak (Athay, et al., 1983) provides results in agreement on the most probable magnetic structure of prominences; these results are detailed. The statistical results were confirmed on favorable individual cases: for 15 prominences observed at Pic-du-Midi, the two-field vectors are pointing on the same side of the prominence, and the alpha angles are large enough with respect to the measurements and interpretation inaccuracies, so that the field polarity is derived without any ambiguity.

Spin injection and detection in lanthanum- and niobium-doped SrTiO3 using the Hanle technique

KAUST Repository

Han, Wei

2013-07-08

There has been much interest in the injection and detection of spin-polarized carriers in semiconductors for the purposes of developing novel spintronic devices. Here we report the electrical injection and detection of spin-polarized carriers into Nb-doped strontium titanate single crystals and La-doped strontium titanate epitaxial thin films using MgO tunnel barriers and the three-terminal Hanle technique. Spin lifetimes of up to ∼100 ps are measured at room temperature and vary little as the temperature is decreased to low temperatures. However, the mobility of the strontium titanate has a strong temperature dependence. This behaviour and the carrier doping dependence of the spin lifetime suggest that the spin lifetime is limited by spin-dependent scattering at the MgO/strontium titanate interfaces, perhaps related to the formation of doping induced Ti 3+. Our results reveal a severe limitation of the three-terminal Hanle technique for measuring spin lifetimes within the interior of the subject material. © 2013 Macmillan Publishers Limited. All rights reserved.

Calculated Hanle transmission and absorption spectra of the 87Rb D1 line with residual magnetic field for arbitrarily polarized light

International Nuclear Information System (INIS)

Noh, Heung-Ryoul; Moon, Han Seb

2010-01-01

This paper reports a theoretical study on the transmission spectra of an arbitrarily polarized laser beam through a rubidium cell with or without a buffer gas in Hanle-type coherent population trapping (CPT). This study examined how laser polarization, transverse magnetic field, and collisions with buffer gas affects the spectrum. The transmission spectrum due to CPT and the absorption spectrum due to the level crossing absorption (LCA) were calculated according to the laser polarization. The results show that the LCA is strongly dependent on the transverse magnetic field and interaction time of the atoms with a laser light via collisions with the buffer gas. In addition, the spectral shape of the calculated Hanle spectrum is closely related to the direction between the (stray) transverse magnetic field and polarization of the laser.

Assessment of Late Quaternary strain partitioning in the Afar Triple Junction: Dobe and Hanle grabens, Ethiopia and Djibouti

Science.gov (United States)

Polun, S. G.; Stockman, M. B.; Hickcox, K.; Horrell, D.; Tesfaye, S.; Gomez, F. G.

2015-12-01

As the only subaerial exposure of a ridge - ridge - ridge triple junction, the Afar region of Ethiopia and Djibouti offers a rare opportunity to assess strain partitioning within this type of triple junction. Here, the plate boundaries do not link discretely, but rather the East African rift meets the Red Sea and Gulf of Aden rifts in a zone of diffuse normal faulting characterized by a lack of magmatic activity, referred to as the central Afar. An initial assessment of Late Quaternary strain partitioning is based on faulted landforms in the Dobe - Hanle graben system in Ethiopia and Djibouti. These two extensional basins are connected by an imbricated accommodation zone. Several fault scarps occur within terraces formed during the last highstand of Lake Dobe, around 5 ka - they provide a means of calibrating a numerical model of fault scarp degradation. Additional timing constraints will be provided by pending exposure ages. The spreading rates of both grabens are equivalent, however in Dobe graben, extension is partitioned 2:1 between northern, south dipping faults and the southern, north dipping fault. Extension in Hanle graben is primarily focused on the north dipping Hanle fault. On the north margin of Dobe graben, the boundary fault bifurcates, where the basin-bordering fault displays a significantly higher modeled uplift rate than the more distal fault, suggesting a basinward propagation of faulting. On the southern Dobe fault, surveyed fault scarps have ages ranging from 30 - 5 ka with uplift rates of 0.71, 0.47, and 0.68 mm/yr, suggesting no secular variation in slip rates from the late Plestocene through the Holocene. These rates are converted into horizontal stretching estimates, which are compared with regional strain estimated from velocities of relatively sparse GPS data.

Hanle model of a spin-orbit coupled Bose-Einstein condensate of excitons in semiconductor quantum wells

Science.gov (United States)

Andreev, S. V.; Nalitov, A. V.

2018-04-01

We present a theoretical model of a driven-dissipative spin-orbit coupled Bose-Einstein condensate of indirect excitons in semiconductor quantum wells (QW's). Our steady-state solution of the problem shares analogies with the Hanle effect in an optical orientation experiment. The role of the spin pump in our case is played by Bose-stimulated scattering into a linearly-polarized ground state and the depolarization occurs as a result of exchange interaction between electrons and holes. Our theory agrees with the recent experiment [A. A. High et al., Phys. Rev. Lett. 110, 246403 (2013), 10.1103/PhysRevLett.110.246403], where spontaneous emergence of spatial coherence and polarization textures have been observed. As a complementary test, we discuss a configuration where an external magnetic field is applied in the structure plane.

Hanle effect at forward scattering in excited media

International Nuclear Information System (INIS)

Veklenko, B.A.

2001-01-01

One introduces a new method to calculate matrix of density of quantized electromagnetic field interacting with environment with kinetic processes in the medium. This method alongside with the accurate account of photon-photon quantum correlators has a number of symmetry features essentially facilitating summing up of appearing Feynman diagrams. Forward scattering of resonance radiation by gas two-level atoms within magnetic field was studied as a supplement. It is shown that inadequacy of semiclassical description of this coherent process in the excited media using unique tensor factor of refraction follows from quantum electrodynamics. One more function depending on frequency of irradiation and on concentration of excited atoms should be introduced [ru

Polarized Line Formation in Arbitrary Strength Magnetic Fields Angle-averaged and Angle-dependent Partial Frequency Redistribution

Energy Technology Data Exchange (ETDEWEB)

Sampoorna, M.; Nagendra, K. N. [Indian Institute of Astrophysics, Koramangala, Bengaluru 560 034 (India); Stenflo, J. O., E-mail: sampoorna@iiap.res.in, E-mail: knn@iiap.res.in, E-mail: stenflo@astro.phys.ethz.ch [Institute of Astronomy, ETH Zurich, CH-8093 Zurich (Switzerland)

2017-08-01

Magnetic fields in the solar atmosphere leave their fingerprints in the polarized spectrum of the Sun via the Hanle and Zeeman effects. While the Hanle and Zeeman effects dominate, respectively, in the weak and strong field regimes, both these effects jointly operate in the intermediate field strength regime. Therefore, it is necessary to solve the polarized line transfer equation, including the combined influence of Hanle and Zeeman effects. Furthermore, it is required to take into account the effects of partial frequency redistribution (PRD) in scattering when dealing with strong chromospheric lines with broad damping wings. In this paper, we present a numerical method to solve the problem of polarized PRD line formation in magnetic fields of arbitrary strength and orientation. This numerical method is based on the concept of operator perturbation. For our studies, we consider a two-level atom model without hyperfine structure and lower-level polarization. We compare the PRD idealization of angle-averaged Hanle–Zeeman redistribution matrices with the full treatment of angle-dependent PRD, to indicate when the idealized treatment is inadequate and what kind of polarization effects are specific to angle-dependent PRD. Because the angle-dependent treatment is presently computationally prohibitive when applied to realistic model atmospheres, we present the computed emergent Stokes profiles for a range of magnetic fields, with the assumption of an isothermal one-dimensional medium.

Fulltext PDF

Indian Academy of Sciences (India)

By employing the same technique, Pinnington et al [3] measured lifetimes of some 4d levels of ArII. In addition, results of measurements using the delayed coincidence method were reported by Blagoev [4] and Garcia and. Campos [5]. Zhechev [6] measured the lifetimes of some 4d levels using the method of Hanle effect.

Resonance scattering formalism for the hydrogen lines in the presence of magnetic and electric fields

International Nuclear Information System (INIS)

Casini, Roberto

2005-01-01

We derive a formalism for the computation of resonance-scattering polarization of hydrogen lines in the presence of simultaneous magnetic and electric fields, within a framework of the quantum theory of polarized line formation in the limit of complete frequency redistribution and of collisionless regime. Quantum interferences between fine-structure levels are included in this formalism. In the presence of a magnetic field, these interferences affect, together with the magnetic Hanle effect, the polarization of the atomic levels. In the presence of an electric field, interferences between distinct orbital configurations are also induced, further affecting the polarization of the hydrogen levels. In turn, the electric field is expected to affect the polarization of the atomic levels (electric Hanle effect), in a way analogous to the magnetic Hanle effect. We find that the simultaneous action of electric and magnetic fields give rise to complicated patterns of polarization and depolarization regimes, for varying geometries and field strengths

Solar polarimetry: observations and theories

Energy Technology Data Exchange (ETDEWEB)

Rees, D E [Sydney Univ. (Australia). Dept. of Applied Mathematics

1982-01-01

This review surveys some recent observations of polarization in solar spectral lines with emphasis on their theoretical interpretation. Observations of non-magnetic resonance line polarization offer a new approach to temperature and density modelling of the atmosphere. They also provide a basis for comparison in Hanle effect studies of weak magnetic fields on the solar disk. Measurements of the Hanle effect are being used to deduce vector magnetic fields in prominences. It is now feasible to try to infer the vector field distribution in an active region such as a sunspot from analysis of the stokes parameter profiles of a Zeeman split line.

In-plane nuclear field formation investigated in single self-assembled quantum dots

Science.gov (United States)

Yamamoto, S.; Matsusaki, R.; Kaji, R.; Adachi, S.

2018-02-01

We studied the formation mechanism of the in-plane nuclear field in single self-assembled In0.75Al0.25As /Al0.3Ga0.7As quantum dots. The Hanle curves with an anomalously large width and hysteretic behavior at the critical transverse magnetic field were observed in many single quantum dots grown in the same sample. In order to explain the anomalies in the Hanle curve indicating the formation of a large nuclear field perpendicular to the photo-injected electron spin polarization, we propose a new model based on the current phenomenological model for dynamic nuclear spin polarization. The model includes the effects of the nuclear quadrupole interaction and the sign inversion between in-plane and out-of-plane components of nuclear g factors, and the model calculations reproduce successfully the characteristics of the observed anomalies in the Hanle curves.

CLASP2: The Chromospheric LAyer Spectro-Polarimeter

Science.gov (United States)

Rachmeler, Laurel; E McKenzie, David; Ishikawa, Ryohko; Trujillo Bueno, Javier; Auchère, Frédéric; Kobayashi, Ken; Winebarger, Amy; Bethge, Christian; Kano, Ryouhei; Kubo, Masahito; Song, Donguk; Narukage, Noriyuki; Ishikawa, Shin-nosuke; De Pontieu, Bart; Carlsson, Mats; Yoshida, Masaki; Belluzzi, Luca; Stepan, Jiri; del Pino Alemná, Tanausú; Ballester, Ernest Alsina; Asensio Ramos, Andres

2017-08-01

We present the instrument, science case, and timeline of the CLASP2 sounding rocket mission. The successful CLASP (Chromospheric Lyman-Alpha Spectro-Polarimeter) sounding rocket flight in 2015 resulted in the first-ever linear polarization measurements of solar hydrogen Lyman-alpha line, which is sensitive to the Hanle effect and can be used to constrain the magnetic field and geometric complexity of the upper chromosphere. Ly-alpha is one of several upper chromospheric lines that contain magnetic information. In the spring of 2019, we will re-fly the modified CLASP telescope to measure the full Stokes profile of Mg II h & k near 280 nm. This set of lines is sensitive to the upper chromospheric magnetic field via both the Hanle and the Zeeman effects.

Dynamic detection of spin accumulation in ferromagnet-semiconductor devices by ferromagnetic resonance (Conference Presentation)

Science.gov (United States)

Crowell, Paul A.; Liu, Changjiang; Patel, Sahil; Peterson, Tim; Geppert, Chad C.; Christie, Kevin; Stecklein, Gordon; Palmstrøm, Chris J.

2016-10-01

A distinguishing feature of spin accumulation in ferromagnet-semiconductor devices is its precession in a magnetic field. This is the basis for detection techniques such as the Hanle effect, but these approaches become ineffective as the spin lifetime in the semiconductor decreases. For this reason, no electrical Hanle measurement has been demonstrated in GaAs at room temperature. We show here that by forcing the magnetization in the ferromagnet to precess at resonance instead of relying only on the Larmor precession of the spin accumulation in the semiconductor, an electrically generated spin accumulation can be detected up to 300 K. The injection bias and temperature dependence of the measured spin signal agree with those obtained using traditional methods. We further show that this new approach enables a measurement of short spin lifetimes (C. Liu, S. J. Patel, T. A. Peterson, C. C. Geppert, K. D. Christie, C. J. Palmstrøm, and P. A. Crowell, "Dynamic detection of electron spin accumulation in ferromagnet-semiconductor devices by ferromagnetic resonance," Nature Communications 7, 10296 (2016). http://dx.doi.org/10.1038/ncomms10296

Chromospheric LAyer SpectroPolarimeter (CLASP2)

Science.gov (United States)

Narukage, Noriyuki; Cirtain, Jonathan W.; Ishikawa, Ryoko; Trujillo-Bueno, Javier; De Pontieu, Bart; Kubo, Masahito; Ishikawa, Shinnosuke; Kano, Ryohei; Suematsu, Yoshinori; Yoshida, Masaki;

European Group for Atomic Spectroscopy. Summaries of contributions, eleventh annual conference, Paris-Orsay, July 10-13, 1979

Energy Technology Data Exchange (ETDEWEB)

1979-07-01

Summaries are presented of talks given at the eleventh conference of the European group for atomic spectroscopy. Topics covered include: lifetimes; collisions; line shape; hyperfine structure; isotope shifts; saturation spectroscopy; Hanle effect; Rydberg levels; quantum beats; helium and helium-like atoms; metrology; and molecules. (GHT)

A Sounding Rocket Experiment for the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP)

Science.gov (United States)

Kubo, M.; Kano, R.; Kobayashi, K.; Bando, T.; Narukage, N.; Ishikawa, R.; Tsuneta, S.; Katsukawa, Y.; Ishikawa, S.; Suematsu, Y.; Hara, H.; Shimizu, T.; Sakao, T.; Ichimoto, K.; Goto, M.; Holloway, T.; Winebarger, A.; Cirtain, J.; De Pontieu, B.; Casini, R.; Auchère, F.; Trujillo Bueno, J.; Manso Sainz, R.; Belluzzi, L.; Asensio Ramos, A.; Štěpán, J.; Carlsson, M.

2014-10-01

A sounding-rocket experiment called the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) is presently under development to measure the linear polarization profiles in the hydrogen Lyman-alpha (Lyα) line at 121.567 nm. CLASP is a vacuum-UV (VUV) spectropolarimeter to aim for first detection of the linear polarizations caused by scattering processes and the Hanle effect in the Lyα line with high accuracy (0.1%). This is a fist step for exploration of magnetic fields in the upper chromosphere and transition region of the Sun. Accurate measurements of the linear polarization signals caused by scattering processes and the Hanle effect in strong UV lines like Lyα are essential to explore with future solar telescopes the strength and structures of the magnetic field in the upper chromosphere and transition region of the Sun. The CLASP proposal has been accepted by NASA in 2012, and the flight is planned in 2015.

CLASP: A UV Spectropolarimeter on a Sounding Rocket for Probing theChromosphere-Corona Transition Regio

Science.gov (United States)

Ishikawa, Ryohko; Kano, Ryouhei; Winebarger, Amy; Auchere, Frederic; Trujillo Bueno, Javier; Bando, Takamasa; Narukage, Noriyuki; Kobayashi, Ken; Katsukawa, Yukio; Kubo, Masahito; Ishikawa, Shin-nosuke; Giono, Gabriel; Tsuneta, Saku; Hara, Hirohisa; Suematsu, Yoshinori; Shimizu, Toshifumi; Sakao, Taro; Ichimoto, Kiyoshi; Cirtain, Jonathan; De Pontieu, Bart; Casini, Roberto; Manso Sainz, Rafael; Asensio Ramos, Andres; Stepan, Jiri; Belluzzi, Luca

2015-08-01

The wish to understand the energetic phenomena of the outer solar atmosphere makes it increasingly important to achieve quantitative information on the magnetic field in the chromosphere-corona transition region. To this end, we need to measure and model the linear polarization produced by scattering processes and the Hanle effect in strong UV resonance lines, such as the hydrogen Lyman-alpha line. A team consisting of Japan, USA, Spain, France, and Norway has been developing a sounding rocket experiment called the Chromospheric Lyman-alpha Spectro-Polarimeter (CLASP). The aim is to detect the scattering polarization produced by anisotropic radiation pumping in the hydrogen Lyman-alpha line (121.6 nm), and via the Hanle effect to try to constrain the magnetic field vector in the upper chromosphere and transition region. In this talk, we will present an overview of our CLASP mission, its scientific objectives, ground tests made, and the latest information on the launch planned for the Summer of 2015.

Iterative Methods for the Non-LTE Transfer of Polarized Radiation: Resonance Line Polarization in One-dimensional Atmospheres

Science.gov (United States)

Trujillo Bueno, Javier; Manso Sainz, Rafael

1999-05-01

This paper shows how to generalize to non-LTE polarization transfer some operator splitting methods that were originally developed for solving unpolarized transfer problems. These are the Jacobi-based accelerated Λ-iteration (ALI) method of Olson, Auer, & Buchler and the iterative schemes based on Gauss-Seidel and successive overrelaxation (SOR) iteration of Trujillo Bueno and Fabiani Bendicho. The theoretical framework chosen for the formulation of polarization transfer problems is the quantum electrodynamics (QED) theory of Landi Degl'Innocenti, which specifies the excitation state of the atoms in terms of the irreducible tensor components of the atomic density matrix. This first paper establishes the grounds of our numerical approach to non-LTE polarization transfer by concentrating on the standard case of scattering line polarization in a gas of two-level atoms, including the Hanle effect due to a weak microturbulent and isotropic magnetic field. We begin demonstrating that the well-known Λ-iteration method leads to the self-consistent solution of this type of problem if one initializes using the ``exact'' solution corresponding to the unpolarized case. We show then how the above-mentioned splitting methods can be easily derived from this simple Λ-iteration scheme. We show that our SOR method is 10 times faster than the Jacobi-based ALI method, while our implementation of the Gauss-Seidel method is 4 times faster. These iterative schemes lead to the self-consistent solution independently of the chosen initialization. The convergence rate of these iterative methods is very high; they do not require either the construction or the inversion of any matrix, and the computing time per iteration is similar to that of the Λ-iteration method.

Influence of laser beam profile on electromagnetically induced absorption

International Nuclear Information System (INIS)

Cuk, S. M.; Radonjic, M.; Krmpot, A. J.; Nikolic, S. N.; Grujic, Z. D.; Jelenkovic, B. M.

2010-01-01

We compared, experimentally and theoretically, Hanle electromagnetically induced absorption (EIA) obtained using Gaussian and Π-shaped laser beams 3 mm in diameter. The study was done by measuring the transmission of a laser locked to the F g =2→F e =3 transition at the D 2 line of 87 Rb in a vacuum cell. EIA linewidths obtained for the two laser profiles were significantly different in the range of laser intensities 1-4 mW/cm 2 . EIA with the Π-shaped laser beam has a broad intensity maximum and linewidths larger than those obtained with the Gaussian beam profile. We also studied Hanle EIA by measuring the transmission of selected segments of the entire laser beam by placing a small movable aperture in front of the detector. Waveforms so obtained in Hanle EIA resonances were strongly influenced both by the radial distance of the transmitted segment from the beam center and by the radial profile of the laser beam. We show that outer regions of Gaussian beam, and central regions of the Π-shaped beam generate the narrowest lines. The different behaviors of EIA owing to different beam profiles revealed by both theory and experiment indicate the importance of the radial profile of the laser beam for proper modeling of coherent effects in alkali metal vapors.

Spin accumulation in Si channels using CoFe/MgO/Si and CoFe/AlOx/Si tunnel contacts with high quality tunnel barriers prepared by radical-oxygen annealing

International Nuclear Information System (INIS)

Akushichi, T.; Shuto, Y.; Sugahara, S.; Takamura, Y.

2015-01-01

We investigate spin injection into Si channels using three-terminal spin-accumulation (3T-SA) devices with high-quality CoFe/MgO/n-Si and CoFe/AlO x /n-Si tunnel spin-injectors whose tunnel barriers are formed by radical oxidation of Mg and Al thin films deposited on Si(100) substrates and successive annealing under radical-oxygen exposure. When the MgO and AlO x barriers are not treated by the radical-oxygen annealing, the Hanle-effect signals obtained from the 3T-SA devices are closely fitted by a single Lorentz function representing a signal due to trap spins. On the other hand, when the tunnel barriers are annealed under radical-oxygen exposure, the Hanle-effect signals can be accurately fitted by the superposition of a Lorentz function and a non-Lorentz function representing a signal due to accumulated spins in the Si channel. These results suggest that the quality improvement of tunnel barriers treated by radical-oxygen annealing is highly effective for spin-injection into Si channels

Polarized electrons, trions, and nuclei in charged quantum dots

Science.gov (United States)

Bracker, A. S.; Tischler, J. G.; Korenev, V. L.; Gammon, D.

2003-07-01

We have investigated spin polarization in GaAs quantum dots. Excitons and trions are polarized directly by optical excitation and studied through polarization of photoluminescence. Electrons and nuclei are polarized indirectly through subsequent relaxation processes. Polarized electrons are identified by the Hanle effect for exciton and trion photoluminescence, while polarized nuclei are identified through the Overhauser effect in individual charged quantum dots.

Spin injection from Co2MnGa into an InGaAs quantum well

DEFF Research Database (Denmark)

Hickey, M. C.; Damsgaard, Christian Danvad; Holmes, S. N.

2008-01-01

We have demonstrated spin injection from a full Heusler alloy Co2MnGa thin film into a (100) InGaAs quantum well in a semiconductor light-emitting diode structure at a temperature of 5 K. The detection is performed in the oblique Hanle geometry, allowing quantification of the effective spin lifet...

Space- and Ground-based Coronal Spectro-Polarimetry

Science.gov (United States)

Fineschi, Silvano; Bemporad, Alessandro; Rybak, Jan; Capobianco, Gerardo

This presentation gives an overview of the near-future perspectives of ultraviolet and visible-light spectro-polarimetric instrumentation for probing coronal magnetism from space-based and ground-based observatories. Spectro-polarimetric imaging of coronal emission-lines in the visible-light wavelength-band provides an important diagnostics tool of the coronal magnetism. The interpretation in terms of Hanle and Zeeman effect of the line-polarization in forbidden emission-lines yields information on the direction and strength of the coronal magnetic field. As study case, this presentation will describe the Torino Coronal Magnetograph (CorMag) for the spectro-polarimetric observation of the FeXIV, 530.3 nm, forbidden emission-line. CorMag - consisting of a Liquid Crystal (LC) Lyot filter and a LC linear polarimeter - has been recently installed on the Lomnicky Peak Observatory 20cm Zeiss coronagraph. The preliminary results from CorMag will be presented. The linear polarization by resonance scattering of coronal permitted line-emission in the ultraviolet (UV)can be modified by magnetic fields through the Hanle effect. Space-based UV spectro-polarimeters would provide an additional tool for the disgnostics of coronal magnetism. As a case study of space-borne UV spectro-polarimeters, this presentation will describe the future upgrade of the Sounding-rocket Coronagraphic Experiment (SCORE) to include the capability of imaging polarimetry of the HI Lyman-alpha, 121.6 nm. SCORE is a multi-wavelength imager for the emission-lines, HeII 30.4 nm and HI 121.6 nm, and visible-light broad-band emission of the polarized K-corona. SCORE has flown successfully in 2009. This presentation will describe how in future re-flights SCORE could observe the expected Hanle effect in corona with a HI Lyman-alpha polarimeter.

Thermoelectric effects and spin injection into superconductors with exchange field

Energy Technology Data Exchange (ETDEWEB)

Heikkilae, Tero [Dept. Phys., Univ. Jyvaeskylae (Finland); Silaev, Mihail [O.V. Lounasmaa Lab, Aalto Univ. (Finland); Dept. Theor. Physics, KTH, Stockholm (Sweden); Virtanen, Pauli [O.V. Lounasmaa Lab, Aalto Univ. (Finland); Giazotto, Francesco [NEST CNR-INFM and SNS Pisa (Italy); Ozaeta, Asier; Bergeret, Sebastian [CFM-CSIC and DIPC, San Sebastian (Spain)

2015-07-01

When a thin superconducting film is exposed to a longitudinal magnetic field or is in proximity to a ferromagnet, an exchange field separating the spin bands emerges in it. For low enough exchange fields superconductivity survives, but its response to external driving is strongly modified. In my talk I will show how at linear response such systems exhibit very strong thermoelectric response with an almost ideal efficiency. For strong driving, this effect creates a spin accumulation that can only relax via thermalization, and therefore at low temperatures has a very long range. Therefore our work explains recent observations of the long-range spin accumulation in spin-split superconductors. When injecting spin from injectors with non-collinear magnetization compared to the exchange field, the spins start to rotate around the latter. I will describe how superconductivity modifies this spin Hanle effect so that the resulting nonlocal magnetoresistance depends on the details of spin relaxation, therefore allowing for probing them.

The project of installing a ZIMPOL_3 polarimeter at GREGOR in Tenerife

OpenAIRE

Michele Bianda; Renzo Ramelli; Jan Olof Stenflo; Svetlana Berdyugina; Daniel Gisler; Ivan Defilippis; Nazaret Bello Gonzáles

2013-01-01

A project of collaboration between Kiepenheuer Institut für Sonnenphysik KIS and Istituto Ricerche Solari Locarno IRSOL includes the installation of a ZIMPOL_3 high resolution polarimeter at the 1.5 meter aperture solar telescope GREGOR in Tenerife. Important scientific topics are expected to be investigated in particular in the case of events showing faint amplitude polarization signatures like scattering polarization effects and the Hanle effect. This project has also a technical importance...

Intensity dependence narrowing of electromagnetically induced absorption in a Doppler-broadened medium

International Nuclear Information System (INIS)

Dimitrijevic, J.; Arsenovic, D.; Jelenkovic, B. M.

2007-01-01

In this paper, we present a theoretical model for studying the interaction between linearly polarized laser light and near-degenerated Zeeman sublevels for a multiple V-type atomic system of 2 S 1/2 F g =2→ 2 P 3/2 F e =3 transition in 87 Rb. We have calculated the laser absorption in a Hanle configuration, as well as the amplitudes and the widths of electromagnetically induced absorption (EIA) in the range of laser intensities from 0.01 to 40 mW/cm 2 . Our results, showing nonvanishing EIA amplitude, a nonmonotonic increase of the EIA width for the increase of laser intensity, and pronounced shape differences of the Hanle EIA curves at different laser intensities, are in good agreement with recent experimental results. We have found that the EIA behaves differently than the electromagnetically induced transparency (EIT) as a function of the laser intensity. Both the amplitude and width of the EIA have narrow maximums at 1 to 2 mW/cm 2 . We have shown the strong influence of Doppler broadening of atomic transition on Hanle resonances and have suggested the explanation of it

Electrical detection of spin transport in lateral ferromagnet-semiconductor devices

Science.gov (United States)

Lou, Xiaohua

2007-03-01

A fully electrical scheme of spin injection, transport, and detection in a single ferromagnet-semiconductor structure has been a long-standing goal in the field of spintronics. In this talk, we report on an experimental demonstration of such a scheme. The devices are fabricated from epitaxial Fe/GaAs (100) heterostructures with highly doped GaAs as a Schottky tunnel barrier. A set of closely spaced Fe contacts on the top of an n-GaAs channel are used as spin injectors and detectors. Reference electrodes are placed at the far ends of the channel, allowing for non-local spin detection [1]. The electro-chemical potential of the detector is sensitive to the relative magnetizations of the injector and detector. In spin-valve measurements, a magnetic field is applied along the Fe easy axis to switch the relative magnetizations of injector and detector from parallel to antiparallel, resulting in a voltage jump that is proportional to the non-equilibrium spin polarization in the channel. A more rigorous test of electrical spin detection is the observation of the Hanle effect, in which an out-of-plane magnetic field is used to modulate and dephase the spin polarization in the channel. The magnitudes of the observed Hanle curves agree with the results of the spin-valve measurements. The dependence of the Hanle curves on temperature and contact separation is studied in detail and is consistent with a drift-diffusion model incorporating spin precession and relaxation. The spin polarization generated by spin injection (reverse bias at the injector) or spin accumulation (forward bias at the injector) is measured using the magneto-optical Kerr effect and is found to be in good agreement with the spin-dependent non-local voltage. Both the transport and optical measurements show a non-linear relationship between the bias voltage at the injector and the spin polarization in the channel. [1] M. Johnson and R. H. Silsbee, Phys. Rev. Lett. 55, 1790 (1985).

Hanle-Zeeman Scattering Matrix for Magnetic Dipole Transitions

Energy Technology Data Exchange (ETDEWEB)

Megha, A.; Sampoorna, M.; Nagendra, K. N.; Sankarasubramanian, K., E-mail: megha@iiap.res.in, E-mail: sampoorna@iiap.res.in, E-mail: knn@iiap.res.in, E-mail: sankar@iiap.res.in [Indian Institute of Astrophysics, Koramangala, Bengaluru 560 034 (India)

2017-06-01

The polarization of the light that is scattered by the coronal ions is influenced by the anisotropic illumination from the photosphere and the magnetic field structuring in the solar corona. The properties of the coronal magnetic fields can be well studied by understanding the polarization properties of coronal forbidden emission lines that arise from magnetic dipole ( M 1) transitions in the highly ionized atoms that are present in the corona. We present the classical scattering theory of the forbidden lines for a more general case of arbitrary-strength magnetic fields. We derive the scattering matrix for M 1 transitions using the classical magnetic dipole model of Casini and Lin and applying the scattering matrix approach of Stenflo. We consider a two-level atom model and neglect collisional effects. The scattering matrix so derived is used to study the Stokes profiles formed in coronal conditions in those regions where the radiative excitations dominate collisional excitations. To this end, we take into account the integration over a cone of an unpolarized radiation from the solar disk incident on the scattering atoms. Furthermore, we also integrate along the line of sight to calculate the emerging polarized line profiles. We consider radial and dipole magnetic field configurations and spherically symmetric density distributions. For our studies we adopt the atomic parameters corresponding to the [Fe xiii] 10747 Å coronal forbidden line. We also discuss the nature of the scattering matrix for M 1 transitions and compare it with that for the electric dipole ( E 1) transitions.

Determination of nuclear spins of short-lived isotopes by laser induced fluorescence

International Nuclear Information System (INIS)

Buchinger, F.; Dabkiewicz, P.; Kremmling, H.; Kuehl, T.; Mueller, A.C.; Schuessler, H.A.

1980-01-01

The spins of several nuclear ground and isomeric states have been measured for a number of mercury isotopes. The fluorescent light from the 6s6p 3 P 1 state is observed at 2537 Angstroem after excitation with the frequency doubled output of a pulsed dye laser. Four different laser induced fluorescence techniques were tested for their applicability: double resonance, Hanle effect, time delayed integral Hanle beats, and time resolved quantum beats. The sensitivity and selectivity of these models are compared with emphasis on the determination of spins of nuclei far from beta-stability, where short half lives and low production yields restrict the number of available atoms. The experiments were carried out on-line with the ISOLDE isotope separator at CERN at densities as low as 10 6 atoms/cm 3 . Results for the very neutron deficient high spin mercury isomers with half lives of several seconds, but also for the ground states of the abundant low spin stable mercury isotopes, are given as examples. The test measurements determined the nuclear spins of the odd sup(185m-191m)Hg isomers to be I = 13/2. (orig.)

Magnetic field vector and electron density diagnostics from linear polarization measurements in 14 solar prominences

Science.gov (United States)

Bommier, V.

1986-01-01

The Hanle effect is the modification of the linear polarization parameters of a spectral line due to the effect of the magnetic field. It has been successfully applied to the magnetic field vector diagnostic in solar prominences. The magnetic field vector is determined by comparing the measured polarization to the polarization computed, taking into account all the polarizing and depolarizing processes in line formation and the depolarizing effect of the magnetic field. The method was applied to simultaneous polarization measurements in the Helium D3 line and in the hydrogen beta line in 14 prominences. Four polarization parameters are measured, which lead to the determination of the three coordinates of the magnetic field vector and the electron density, owing to the sensitivity of the hydrogen beta line to the non-negligible effect of depolarizing collisions with electrons and protons of the medium. A mean value of 1.3 x 10 to the 10th power cu. cm. is derived in 14 prominences.

Exchange-Dominated Pure Spin Current Transport in Alq3 Molecules.

Science.gov (United States)

Jiang, S W; Liu, S; Wang, P; Luan, Z Z; Tao, X D; Ding, H F; Wu, D

2015-08-21

We address the controversy over the spin transport mechanism in Alq3 utilizing spin pumping in the Y3Fe5O12/Alq3/Pd system. An unusual angular dependence of the inverse spin Hall effect is found. It, however, disappears when the microwave magnetic field is fully in the sample plane, excluding the presence of the Hanle effect. Together with the quantitative temperature-dependent measurements, these results provide compelling evidence that the pure spin current transport in Alq3 is dominated by the exchange-mediated mechanism.

Optical pumping of electron and nuclear spin in a negatively-charged quantum dot

Science.gov (United States)

Bracker, Allan; Gershoni, David; Korenev, Vladimir

2005-03-01

We report optical pumping of electron and nuclear spins in an individual negatively-charged quantum dot. With a bias-controlled heterostructure, we inject one electron into the quantum dot. Intense laser excitation produces negative photoluminescence polarization, which is easily erased by the Hanle effect, demonstrating optical pumping of a long-lived resident electron. The electron spin lifetime is consistent with the influence of nuclear spin fluctuations. Measuring the Overhauser effect in high magnetic fields, we observe a high degree of nuclear spin polarization, which is closely correlated to electron spin pumping.

Optical Pumping of the Electronic and Nuclear Spin of Single Charge-Tunable Quantum Dots

Science.gov (United States)

Bracker, A. S.; Stinaff, E. A.; Gammon, D.; Ware, M. E.; Tischler, J. G.; Shabaev, A.; Efros, Al. L.; Park, D.; Gershoni, D.; Korenev, V. L.; Merkulov, I. A.

2005-02-01

We present a comprehensive examination of optical pumping of spins in individual GaAs quantum dots as we change the net charge from positive to neutral to negative with a charge-tunable heterostructure. Negative photoluminescence polarization memory is enhanced by optical pumping of ground state electron spins, which we prove with the first measurements of the Hanle effect on an individual quantum dot. We use the Overhauser effect in a high longitudinal magnetic field to demonstrate efficient optical pumping of nuclear spins for all three charge states of the quantum dot.

Spectro-polarimetric observation in UV with CLASP to probe the chromosphere and transition region

Science.gov (United States)

Kano, Ryouhei; Ishikawa, Ryohko; Winebarger, Amy R.; Auchère, Frédéric; Trujillo Bueno, Javier; Narukage, Noriyuki; Kobayashi, Ken; Bando, Takamasa; Katsukawa, Yukio; Kubo, Masahito; Ishikawa, Shin-Nosuke; Giono, Gabriel; Hara, Hirohisa; Suematsu, Yoshinori; Shimizu, Toshifumi; Sakao, Taro; Tsuneta, Saku; Ichimoto, Kiyoshi; Goto, Motoshi; Cirtain, Jonathan W.; De Pontieu, Bart; Casini, Roberto; Manso Sainz, Rafael; Asensio Ramos, Andres; Stepan, Jiri; Belluzzi, Luca; Carlsson, Mats

2016-05-01

The Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) is a NASA sounding-rocket experiment that was performed in White Sands in the US on September 3, 2015. During its 5-minute ballistic flight, CLASP successfully made the first spectro-polarimetric observation in the Lyman-alpha line (121.57 nm) originating in the chromosphere and transition region. Since the Lyman-alpha polarization is sensitive to magnetic field of 10-100 G by the Hanle effect, we aim to infer the magnetic field information in such upper solar atmosphere with this experiment.The obtained CLASP data showed that the Lyman-alpha scattering polarization is about a few percent in the wings and the order of 0.1% in the core near the solar limb, as it had been theoretically predicted, and that both polarization signals have a conspicuous spatio-temporal variability. CLASP also observed another upper-chromospheric line, Si III (120.65 nm), whose critical field strength for the Hanle effect is 290 G, and showed a measurable scattering polarization of a few % in this line. The polarization properties of the Si III line could facilitate the interpretation of the scattering polarization observed in the Lyman-alpha line.In this presentation, we would like to show how the upper chromosphere and transition region are seen in the polarization of these UV lines and discuss the possible source of these complicated polarization signals.

SCORE - Sounding-rocket Coronagraphic Experiment

Science.gov (United States)

Fineschi, Silvano; Moses, Dan; Romoli, Marco

The Sounding-rocket Coronagraphic Experiment - SCORE - is a The Sounding-rocket Coronagraphic Experiment - SCORE - is a coronagraph for multi-wavelength imaging of the coronal Lyman-alpha lines, HeII 30.4 nm and HI 121.6 nm, and for the broad.band visible-light emission of the polarized K-corona. SCORE has flown successfully in 2009 acquiring the first images of the HeII line-emission from the extended corona. The simultaneous observation of the coronal Lyman-alpha HI 121.6 nm, has allowed the first determination of the absolute helium abundance in the extended corona. This presentation will describe the lesson learned from the first flight and will illustrate the preparations and the science perspectives for the second re-flight approved by NASA and scheduled for 2016. The SCORE optical design is flexible enough to be able to accommodate different experimental configurations with minor modifications. This presentation will describe one of such configurations that could include a polarimeter for the observation the expected Hanle effect in the coronal Lyman-alpha HI line. The linear polarization by resonance scattering of coronal permitted line-emission in the ultraviolet (UV) can be modified by magnetic fields through the Hanle effect. Thus, space-based UV spectro-polarimetry would provide an additional new tool for the diagnostics of coronal magnetism.

Chromospheric Lyman-alpha spectro-polarimeter (CLASP)

Science.gov (United States)

Kano, Ryouhei; Bando, Takamasa; Narukage, Noriyuki; Ishikawa, Ryoko; Tsuneta, Saku; Katsukawa, Yukio; Kubo, Masahito; Ishikawa, Shin-nosuke; Hara, Hirohisa; Shimizu, Toshifumi; Suematsu, Yoshinori; Ichimoto, Kiyoshi; Sakao, Taro; Goto, Motoshi; Kato, Yoshiaki; Imada, Shinsuke; Kobayashi, Ken; Holloway, Todd; Winebarger, Amy; Cirtain, Jonathan; De Pontieu, Bart; Casini, Roberto; Trujillo Bueno, Javier; Štepán, Jiří; Manso Sainz, Rafael; Belluzzi, Luca; Asensio Ramos, Andres; Auchère, Frédéric; Carlsson, Mats

2012-09-01

One of the biggest challenges in heliophysics is to decipher the magnetic structure of the solar chromosphere. The importance of measuring the chromospheric magnetic field is due to both the key role the chromosphere plays in energizing and structuring the outer solar atmosphere and the inability of extrapolation of photospheric fields to adequately describe this key boundary region. Over the last few years, significant progress has been made in the spectral line formation of UV lines as well as the MHD modeling of the solar atmosphere. It is found that the Hanle effect in the Lyman-alpha line (121.567 nm) is a most promising diagnostic tool for weaker magnetic fields in the chromosphere and transition region. Based on this groundbreaking research, we propose the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) to NASA as a sounding rocket experiment, for making the first measurement of the linear polarization produced by scattering processes and the Hanle effect in the Lyman-alpha line (121.567 nm), and making the first exploration of the magnetic field in the upper chromosphere and transition region of the Sun. The CLASP instrument consists of a Cassegrain telescope, a rotating 1/2-wave plate, a dual-beam spectrograph assembly with a grating working as a beam splitter, and an identical pair of reflective polarization analyzers each equipped with a CCD camera. We propose to launch CLASP in December 2014.

Effectiveness of Family Planning Methods

Science.gov (United States)

... women in a year Effectiveness of Family Planning Methods Implant Reversible Intrauterine Device (IUD) Permanent Male Sterilization ... 0.5 % Diaphragm 12 % How to make your method most effective After procedure, little or nothing to ...

Anisotropic spin relaxation in graphene

NARCIS (Netherlands)

Tombros, N.; Tanabe, S.; Veligura, A.; Jozsa, C.; Popinciuc, M.; Jonkman, H. T.; van Wees, B. J.

2008-01-01

Spin relaxation in graphene is investigated in electrical graphene spin valve devices in the nonlocal geometry. Ferromagnetic electrodes with in-plane magnetizations inject spins parallel to the graphene layer. They are subject to Hanle spin precession under a magnetic field B applied perpendicular

Polarized line formation with J-state interference in the presence of magnetic fields: A Heuristic treatment of collisional frequency redistribution

International Nuclear Information System (INIS)

Smitha, H.N.; Nagendra, K.N.; Sampoorna, M.; Stenflo, J.O.

2013-01-01

An expression for the partial frequency redistribution (PRD) matrix for line scattering in a two-term atom, which includes the J-state interference between its fine structure line components is derived. The influence of collisions (both elastic and inelastic) and an external magnetic field on the scattering process is taken into account. The lower term is assumed to be unpolarized and infinitely sharp. The linear Zeeman regime in which the Zeeman splitting is much smaller than the fine structure splitting is considered. The inelastic collision rates between the different levels are included in our treatment. We account for the depolarization caused by the collisions coupling the fine structure states of the upper term, but neglect the polarization transfer between the fine structure states. When the fine structure splitting goes to zero, we recover the redistribution matrix that represents the scattering on a two-level atom (which exhibits only m-state interference—namely the Hanle effect). The way in which the multipolar index of the scattering atom enters into the expression for the redistribution matrix through the collisional branching ratios is discussed. The properties of the redistribution matrix are explored for a single scattering process for a L=0→1→0 scattering transition with S=1/2 (a hypothetical doublet centered at 5000 Å and 5001 Å). Further, a method for solving the Hanle radiative transfer equation for a two-term atom in the presence of collisions, PRD, and J-state interference is developed. The Stokes profiles emerging from an isothermal constant property medium are computed. -- Highlights: ► Polarized partial frequency redistribution matrix (PRDM) for two-term atom is derived. ► PRDM includes collisions heuristically and magnetic fields in linear Zeeman regime. ► A method to include this PRDM into the radiative transfer equation is presented. ► The transfer equation is solved both for the magnetic and non-magnetic cases. ► The

Contact induced spin relaxation in graphene spin valves with Al2O3 and MgO tunnel barriers

Directory of Open Access Journals (Sweden)

Walid Amamou

2016-03-01

Full Text Available We investigate spin relaxation in graphene by systematically comparing the roles of spin absorption, other contact-induced effects (e.g., fringe fields, and bulk spin relaxation for graphene spin valves with MgO barriers, Al2O3 barriers, and transparent contacts. We obtain effective spin lifetimes by fitting the Hanle spin precession data with two models that include or exclude the effect of spin absorption. Results indicate that additional contact-induced spin relaxation other than spin absorption dominates the contact effect. For tunneling contacts, we find reasonable agreement between the two models with median discrepancy of ∼20% for MgO and ∼10% for Al2O3.

History of Solar Magnetic Fields Since George Ellery Hale

Science.gov (United States)

Stenflo, J. O.

2017-09-01

As my own work on the Sun's magnetic field started exactly 50 years ago at Crimea in the USSR, I have been a participant in the field during nearly half the time span since Hale's discovery in 1908 of magnetic fields in sunspots. The present historical account is accompanied by photos from my personal slide collection, which show a number of the leading personalities who advanced the field in different areas: measurement techniques, from photographic to photoelectric and imaging methods in spectro-polarimetry; theoretical foundations of MHD and the origin of cosmic magnetic fields (birth of dynamo theory); the quest for increased angular resolution from national projects to international consortia (for instruments both on ground and in space); introduction of the Hanle effect in astrophysics and the Second Solar Spectrum as its playground; small-scale nature of the field, the fundamental resolution limit, and transcending it by resolution-independent diagnostics.

Longitudinal and transverse spin dynamics of donor-bound electrons in fluorine-doped ZnSe: Spin inertia versus Hanle effect

Science.gov (United States)

Heisterkamp, F.; Zhukov, E. A.; Greilich, A.; Yakovlev, D. R.; Korenev, V. L.; Pawlis, A.; Bayer, M.

2015-06-01

The spin dynamics of strongly localized donor-bound electrons in fluorine-doped ZnSe epilayers is studied using pump-probe Kerr rotation techniques. A method exploiting the spin inertia is developed and used to measure the longitudinal spin relaxation time T1 in a wide range of magnetic fields, temperatures, and pump densities. The T1 time of the donor-bound electron spin of about 1.6 μ s remains nearly constant for external magnetic fields varied from zero up to 2.5 T (Faraday geometry) and in a temperature range 1.8-45 K. These findings impose severe restrictions on possible spin relaxation mechanisms. In our opinion they allow us to rule out scattering between free and donor-bound electrons, jumping of electrons between different donor centers, scattering between phonons and donor-bound electrons, and with less certainty charge fluctuations in the environment of the donors caused by the 1.5 ps pulsed laser excitation.

Effective Methods of Teaching Moon Phases

Science.gov (United States)

Jones, Heather; Hintz, E. G.; Lawler, M. J.; Jones, M.; Mangrubang, F. R.; Neeley, J. E.

2010-01-01

This research investigates the effectiveness of several commonly used methods for teaching the causes of moon phases to sixth grade students. Common teaching methods being investigated are the use of diagrams, animations, modeling/kinesthetics and direct observations of moon phases using a planetarium. Data for each method will be measured by a pre and post assessment of students understanding of moon phases taught using one of the methods. The data will then be used to evaluate the effectiveness of each teaching method individually and comparatively, as well as the method's ability to discourage common misconceptions about moon phases. Results from this research will provide foundational data for the development of educational planetarium shows for the deaf or other linguistically disadvantage children.

Rashba-Edelstein Magnetoresistance in Metallic Heterostructures.

Science.gov (United States)

Nakayama, Hiroyasu; Kanno, Yusuke; An, Hongyu; Tashiro, Takaharu; Haku, Satoshi; Nomura, Akiyo; Ando, Kazuya

2016-09-09

We report the observation of magnetoresistance originating from Rashba spin-orbit coupling (SOC) in a metallic heterostructure: the Rashba-Edelstein (RE) magnetoresistance. We show that the simultaneous action of the direct and inverse RE effects in a Bi/Ag/CoFeB trilayer couples current-induced spin accumulation to the electric resistance. The electric resistance changes with the magnetic-field angle, reminiscent of the spin Hall magnetoresistance, despite the fact that bulk SOC is not responsible for the magnetoresistance. We further found that, even when the magnetization is saturated, the resistance increases with increasing the magnetic-field strength, which is attributed to the Hanle magnetoresistance in this system.

Discrete Lattice effect of various forcing methods of body force on immersed Boundary-Lattice Boltzmann method

Energy Technology Data Exchange (ETDEWEB)

Son, Sung Wan; Ha, Man Yeong; Yoon, Hyun Sik [Pusan National University, Busan (Korea, Republic of); Jeong, Hae Kwon [POSCO, Pohang (Korea, Republic of); Balachandar, S. [University of Florida, Florida (United States)

2013-02-15

We investigate the discrete lattice effect of various forcing methods in the lattice Boltzmann method (LBM) to include the body force obtained from the immersed boundary method (IBM). In the immersed boundary lattice Boltzmann method (IB-LBM), the LBM needs a forcing method to involve the body force on a forcing point near the immersed boundary that is calculated by IBM. The proper forcing method in LBM is derived to include the body force, which appears to resolve problems such as multiphase flow, non-ideal gas behavior, etc. Many researchers have adopted different forcing methods in LBM to involve the body force from IBM, even when they solved similar problems. However, it is necessary to evaluate the discrete lattice effect, which originates from different forcing methods in LBM, to include the effect of the body force from IBM on the results. Consequently, in this study, a rigorous analysis of the discrete lattice effect for different forcing methods in IB-LBM is performed by solving various problems.

Discrete Lattice effect of various forcing methods of body force on immersed Boundary-Lattice Boltzmann method

International Nuclear Information System (INIS)

Son, Sung Wan; Ha, Man Yeong; Yoon, Hyun Sik; Jeong, Hae Kwon; Balachandar, S.

2013-01-01

We investigate the discrete lattice effect of various forcing methods in the lattice Boltzmann method (LBM) to include the body force obtained from the immersed boundary method (IBM). In the immersed boundary lattice Boltzmann method (IB-LBM), the LBM needs a forcing method to involve the body force on a forcing point near the immersed boundary that is calculated by IBM. The proper forcing method in LBM is derived to include the body force, which appears to resolve problems such as multiphase flow, non-ideal gas behavior, etc. Many researchers have adopted different forcing methods in LBM to involve the body force from IBM, even when they solved similar problems. However, it is necessary to evaluate the discrete lattice effect, which originates from different forcing methods in LBM, to include the effect of the body force from IBM on the results. Consequently, in this study, a rigorous analysis of the discrete lattice effect for different forcing methods in IB-LBM is performed by solving various problems.

Kenesarı İsyanı (1837-1847

Directory of Open Access Journals (Sweden)

Yunus Emre TANSÜ

2017-12-01

Full Text Available XVII. yüzyılın ikinci çeyreğinde Türkistan’da Kazakların yaşadığı bölge üç büyük Hanlığa bölünmüş şekilde yönetilirken iç çatışmalar ve dış baskılar sonucunda Çarlık Rusya hükümetinin himayesini kabul etmek zorunda kalmıştır. Türk Hanedanları XVIII. yüzyılın başlarına kadar Çarlık Rusya’ya bağlı kalarak Hanlıklarını yönetmişlerdir. Fakat Çarlık Rusya, 1822’de Kazak halkı statüsü ve yaşam tüzüğü çıkartmıştır. Çarlık Rusya bu kurallara göre Türkistan’ı yönetmek ve Türkistan’ın Kazak Türklerinin yaşadığı coğrafi bölgesini tamamen himaye altına almak istemiştir. Kazak Hanlıkları artık eskisi gibi Çarlık Rusya’ya bağlı şekilde ülkelerini yönetme imkanları ellerinden alınması, Çarlık Rusya hükümetinin Kazak coğrafyasını üst olarak kullanması, Kazak topraklarında kale inşa etmeleri, Kazak halkın topraklarına el koyması ve en önemlisi de milli bağımsızlıkları ellerinden alınması isyan etmelerine neden olmuştur. Çarlık Rusya hükümetine karşı en önemli direnişi veren kişi Orta-Cüz Hanlığın Sultanı olan Abılay Han’ın torunu Kenesarı Han’dır. Çarlık Rusya’nın sömürgecilik faaliyetlerine karşı çıkan Kenesarı Han, Orta-Cüz’ün lideri olarak kendi safında Cüzleri birleştirmiş, milli kuvvet adını verdiği askeri teşkilat kurmuş, bir devlet gibi yönetmenlikler ve reformlar yaparak Çarlık Rusya’ya karşı milli bağımsızlık savaşı yapmıştır. 1842-1845 yılları Kenesarı Han’ın Çarlık Rusya’ya, Ağa Sultanlara, Beylere ve bazı Kazak Hanlıklarına karşı başarılı olduğu dönem olmuştur. 1845-1847 yılları ise Kenesarı Han’ın kan kaybettiği ve isyanın bastırıldığı dönem olmuştur. Kenesarı Han isyanının bastırılması ve öldürülmesi ise Kırgız Hanı Ormon Han tarafından gerçekleştirilmiştir.

Design of cooling towers by the effectiveness-NTU method

International Nuclear Information System (INIS)

Jaber, H.; Webb, R.L.

1989-01-01

This paper develops the effectiveness-NTU, number of transfer units, design method for cooling towers. The definitions for effectiveness and NTU are totally consistent with the fundamental definitions used in heat exchanger design. Sample calculations are presented for counter and crossflow cooling towers. Using the proper definitions, a person competent in heat transfer design can easily use the same basic method to design a cooling tower of counter, cross, or parallel flow configuration. The problems associated with the curvature of the saturated air enthalpy line are also treated. A one-increment design ignores the effect of this curvature. Increased precision can be obtained by dividing the cooling range into two or more increments. The standard effectiveness-NYU method is then used for each of the increments. Calculations are presented to define the error associated with different numbers of increments. This defines the number of increments required to attain a desired degree of precision. The authors also summarize the LMED method introduced by Berman, and show that this is totally consistent with the effectiveness-NTU method. Hence, using proper and consistent terms, heat exchanger designers are shown how to use either the standard Log-Mean Enthalpy Method (LMED) or effectiveness-NTU design methods to design cooling towers

A method for Effect Modifier Assessment in ergonomic intervention research – The EMA method

DEFF Research Database (Denmark)

Edwards, Kasper; Winkel, Jørgen

2016-01-01

Introduction: Ergonomic intervention research includes studies in which researchers arrange (or follow) changes in working conditions to determine the effects in risk factors and/or health. Often this research takes place at workplaces and not in a controlled environment of a laboratory. The effe......Introduction: Ergonomic intervention research includes studies in which researchers arrange (or follow) changes in working conditions to determine the effects in risk factors and/or health. Often this research takes place at workplaces and not in a controlled environment of a laboratory...... of the literature revealed lack of or poor consideration of effect modifiers in ergonomic intervention research. We present a method that has been developed over the course of several years parallel to intervention studies in healthcare. Material and methods: The EMA method is a type of group interview including 3...... sources. Conclusion: The EMA method seems to offer a feasible procedure to obtain significant knowledge on potential effect modifiers in ergonomic intervention research. However, further development and validation is suggested....

Method for effective usage of Google Analytics tools

Directory of Open Access Journals (Sweden)

Ирина Николаевна Егорова

2016-01-01

Full Text Available Modern Google Analytics tools have been investigated against effective attraction channels for users and bottlenecks detection. Conducted investigation allowed to suggest modern method for effective usage of Google Analytics tools. The method is based on main traffic indicators analysis, as well as deep analysis of goals and their consecutive tweaking. Method allows to increase website conversion and might be useful for SEO and Web analytics specialists

Method of measurement on materials shielding effectiveness test in time domain

International Nuclear Information System (INIS)

Liu Shunkun; Han Jun; Chen Xiangyue

2009-01-01

Windows method is a measurement of slot coupling effect in nature when it is used to measure material's shielding effectiveness. The error of measurement will become serious when it is used to measure material's shielding effectiveness in low frequency band. It is difficult to measure material's shielding effectiveness of electromagnetic pulse with Windows method. Device under test method (DUT method) was presented in this paper to overcome the limitations of Windows method in material's shielding effectiveness test. The method can be used to measure any material's shielding Effectiveness effectively through the design and the test of the DUT.The method was used to measure shielding effectiveness of special cement .Compared with theoretical analysis,the measurement result prove the DUT method to be very efficient in material's shielding effectiveness test. (authors)

Effective beam method for element concentrations

International Nuclear Information System (INIS)

Tolhurst, Thomas; Barbi, Mauricio; Tokaryk, Tim

2015-01-01

A method to evaluate chemical element concentrations in samples by generating an effective polychromatic beam using as initial input real monochromatic beam data is presented. There is a great diversity of research being conducted at synchrotron facilities around the world and a diverse set of beamlines to accommodate this research. Time is a precious commodity at synchrotron facilities; therefore, methods that can maximize the time spent collecting data are of value. At the same time the incident radiation spectrum, necessary for some research, may not be known on a given beamline. A preliminary presentation of a method applicable to X-ray fluorescence spectrocopic analyses that overcomes the lack of information about the incident beam spectrum that addresses both of these concerns is given here. The method is equally applicable for other X-ray sources so long as local conditions are considered. It relies on replacing the polychromatic spectrum in a standard fundamental parameters analysis with a set of effective monochromatic photon beams. A beam is associated with each element and can be described by an analytical function allowing extension to elements not included in the necessary calibration measurement(s)

Method effects: the problem with negatively versus positively keyed items.

Science.gov (United States)

Lindwall, Magnus; Barkoukis, Vassilis; Grano, Caterina; Lucidi, Fabio; Raudsepp, Lennart; Liukkonen, Jarmo; Thøgersen-Ntoumani, Cecilie

2012-01-01

Using confirmatory factor analyses, we examined method effects on Rosenberg's Self-Esteem Scale (RSES; Rosenberg, 1965) in a sample of older European adults. Nine hundred forty nine community-dwelling adults 60 years of age or older from 5 European countries completed the RSES as well as measures of depression and life satisfaction. The 2 models that had an acceptable fit with the data included method effects. The method effects were associated with both positively and negatively worded items. Method effects models were invariant across gender and age, but not across countries. Both depression and life satisfaction predicted method effects. Individuals with higher depression scores and lower life satisfaction scores were more likely to endorse negatively phrased items.

Some absolutely effective product methods

Directory of Open Access Journals (Sweden)

H. P. Dikshit

1992-01-01

Full Text Available It is proved that the product method A(C,1, where (C,1 is the Cesàro arithmetic mean matrix, is totally effective under certain conditions concerning the matrix A. This general result is applied to study absolute Nörlund summability of Fourier series and other related series.

Strong Stability Preserving Explicit Runge--Kutta Methods of Maximal Effective Order

KAUST Repository

Hadjimichael, Yiannis

2013-07-23

We apply the concept of effective order to strong stability preserving (SSP) explicit Runge--Kutta methods. Relative to classical Runge--Kutta methods, methods with an effective order of accuracy are designed to satisfy a relaxed set of order conditions but yield higher order accuracy when composed with special starting and stopping methods. We show that this allows the construction of four-stage SSP methods with effective order four (such methods cannot have classical order four). However, we also prove that effective order five methods---like classical order five methods---require the use of nonpositive weights and so cannot be SSP. By numerical optimization, we construct explicit SSP Runge--Kutta methods up to effective order four and establish the optimality of many of them. Numerical experiments demonstrate the validity of these methods in practice.

Strong Stability Preserving Explicit Runge--Kutta Methods of Maximal Effective Order

KAUST Repository

Hadjimichael, Yiannis; Macdonald, Colin B.; Ketcheson, David I.; Verner, James H.

2013-01-01

We apply the concept of effective order to strong stability preserving (SSP) explicit Runge--Kutta methods. Relative to classical Runge--Kutta methods, methods with an effective order of accuracy are designed to satisfy a relaxed set of order conditions but yield higher order accuracy when composed with special starting and stopping methods. We show that this allows the construction of four-stage SSP methods with effective order four (such methods cannot have classical order four). However, we also prove that effective order five methods---like classical order five methods---require the use of nonpositive weights and so cannot be SSP. By numerical optimization, we construct explicit SSP Runge--Kutta methods up to effective order four and establish the optimality of many of them. Numerical experiments demonstrate the validity of these methods in practice.

Genealogical series method. Hyperpolar points screen effect

International Nuclear Information System (INIS)

Gorbatov, A.M.

1991-01-01

The fundamental values of the genealogical series method -the genealogical integrals (sandwiches) have been investigated. The hyperpolar points screen effect has been found. It allows one to calculate the sandwiches for the Fermion systems with large number of particles and to ascertain the validity of the iterated-potential method as well. For the first time the genealogical-series method has been realized numerically for the central spin-independent potential

Optical pumping and negative luminescence polarization in charged GaAs quantum dots

Science.gov (United States)

Shabaev, Andrew; Stinaff, Eric A.; Bracker, Allan S.; Gammon, Daniel; Efros, Alexander L.; Korenev, Vladimir L.; Merkulov, Igor

2009-01-01

Optical pumping of electron spins and negative photoluminescence polarization are observed when interface quantum dots in a GaAs quantum well are excited nonresonantly by circularly polarized light. Both observations can be explained by the formation of long-lived dark excitons through hole spin relaxation in the GaAs quantum well prior to exciton capture. In this model, optical pumping of resident electron spins is caused by capture of dark excitons and recombination in charged quantum dots. Negative polarization results from accumulation of dark excitons in the quantum well and is enhanced by optical pumping. The dark exciton model describes the experimental results very well, including intensity and bias dependence of the photoluminescence polarization and the Hanle effect.

Effectiveness of weed control methods on pavement

NARCIS (Netherlands)

Vermeulen, G.D.; Verwijs, B.R.; Kempenaar, C.

2007-01-01

The policy in the Netherlands is to signifiantly reduce the use of herbicides, also on pavements. Existing non-chemical methods to control weeds are much less effective than spot spraying, the usual method at this moment. Therefore, the cost of non-chemical weed management is often estimated to be 4

Superfield tadpole method for SUSY effective potential

International Nuclear Information System (INIS)

Srivastava, P.P.

1983-01-01

Superfield formulation of Weinberg's tadpole method to compute the effective potential in supersymmetric theories is illustrated by considering the general renormalizable action involving only chiral scalar superfields. Unconstrained superfield potentials are introduced to simplify the ''effective'' superfield propagator which is derived in a compact form. (orig.)

Effect of mucin extraction method on some properties of ...

African Journals Online (AJOL)

Effect of mucin extraction method on some properties of metronidazole mucoadhesive loaded patches. MI Arhewoh, SO Eraga, PF Builders, MA Ibobiri. Abstract. To evaluate the effects of mucin extraction method and plasticizer concentration on the bioadhesive strength and metronidazole release profile from mucin-based ...

Exploration of the Effectiveness of Tactile Methods

Science.gov (United States)

Aldajani, Neda F.

2016-01-01

This paper introduces the tactile method and aims to explore the effectiveness of using tactile methods with students who are blind and visually impaired. Although there was limited research about using this strategy, all of the research agrees that using tactile is one of the best ways for students who are blind and visually impaired to be…

Rosenberg's Self-Esteem Scale: Two Factors or Method Effects.

Science.gov (United States)

Tomas, Jose M.; Oliver, Amparo

1999-01-01

Results of a study with 640 Spanish high school students suggest the existence of a global self-esteem factor underlying responses to Rosenberg's (M. Rosenberg, 1965) Self-Esteem Scale, although the inclusion of method effects is needed to achieve a good model fit. Method effects are associated with item wording. (SLD)

An effective method for terrestrial arthropod euthanasia.

Science.gov (United States)

Bennie, Neil A C; Loaring, Christopher D; Bennie, Mikaella M G; Trim, Steven A

2012-12-15

As scientific understanding of invertebrate life increases, so does the concern for how to end that life in an effective way that minimises (potential) suffering and is also safe for those carrying out the procedure. There is increasing debate on the most appropriate euthanasia methods for invertebrates as their use in experimental research and zoological institutions grows. Their popularity as pet species has also led to an increase in the need for greater veterinary understanding. Through the use of a local injection of potassium chloride (KCl) initially developed for use in American lobsters, this paper describes a safe and effective method for euthanasia in terrestrial invertebrates. Initial work focused on empirically determining the dose for cockroaches, which was then extrapolated to other arthropod species. For this method of euthanasia, we propose the term 'targeted hyperkalosis' to describe death through terminal depolarisation of the thoracic ganglia as a result of high potassium concentration.

Prediction methods environmental-effect reporting

International Nuclear Information System (INIS)

Jonker, R.J.; Koester, H.W.

1987-12-01

This report provides a survey of prediction methods which can be applied to the calculation of emissions in cuclear-reactor accidents, in the framework of environment-effect reports (dutch m.e.r.) or risk analyses. Also emissions during normal operation are important for m.e.r.. These can be derived from measured emissions of power plants being in operation. Data concerning the latter are reported. The report consists of an introduction into reactor technology, among which a description of some reactor types, the corresponding fuel cycle and dismantling scenarios - a discussion of risk-analyses for nuclear power plants and the physical processes which can play a role during accidents - a discussion of prediction methods to be employed and the expected developments in this area - some background information. (aughor). 145 refs.; 21 figs.; 20 tabs

Instrumental variable methods in comparative safety and effectiveness research.

Science.gov (United States)

Brookhart, M Alan; Rassen, Jeremy A; Schneeweiss, Sebastian

2010-06-01

Instrumental variable (IV) methods have been proposed as a potential approach to the common problem of uncontrolled confounding in comparative studies of medical interventions, but IV methods are unfamiliar to many researchers. The goal of this article is to provide a non-technical, practical introduction to IV methods for comparative safety and effectiveness research. We outline the principles and basic assumptions necessary for valid IV estimation, discuss how to interpret the results of an IV study, provide a review of instruments that have been used in comparative effectiveness research, and suggest some minimal reporting standards for an IV analysis. Finally, we offer our perspective of the role of IV estimation vis-à-vis more traditional approaches based on statistical modeling of the exposure or outcome. We anticipate that IV methods will be often underpowered for drug safety studies of very rare outcomes, but may be potentially useful in studies of intended effects where uncontrolled confounding may be substantial.

Instrumental variable methods in comparative safety and effectiveness research†

Science.gov (United States)

Brookhart, M. Alan; Rassen, Jeremy A.; Schneeweiss, Sebastian

2010-01-01

Summary Instrumental variable (IV) methods have been proposed as a potential approach to the common problem of uncontrolled confounding in comparative studies of medical interventions, but IV methods are unfamiliar to many researchers. The goal of this article is to provide a non-technical, practical introduction to IV methods for comparative safety and effectiveness research. We outline the principles and basic assumptions necessary for valid IV estimation, discuss how to interpret the results of an IV study, provide a review of instruments that have been used in comparative effectiveness research, and suggest some minimal reporting standards for an IV analysis. Finally, we offer our perspective of the role of IV estimation vis-à-vis more traditional approaches based on statistical modeling of the exposure or outcome. We anticipate that IV methods will be often underpowered for drug safety studies of very rare outcomes, but may be potentially useful in studies of intended effects where uncontrolled confounding may be substantial. PMID:20354968

Spin heat accumulation induced by tunneling from a ferromagnet.

Science.gov (United States)

Vera-Marun, I J; van Wees, B J; Jansen, R

2014-02-07

An electric current from a ferromagnet into a nonmagnetic material can induce a spin-dependent electron temperature. Here, it is shown that this spin heat accumulation, when created by tunneling from a ferromagnet, produces a non-negligible voltage signal that is comparable to that due to the coexisting electrical spin accumulation and can give a different Hanle spin precession signature. The effect is governed by the spin polarization of the Peltier coefficient of the tunnel contact, its Seebeck coefficient, and the spin heat resistance of the nonmagnetic material, which is related to the electrical spin resistance by a spin-Wiedemann-Franz law. Moreover, spin heat injection is subject to a heat conductivity mismatch that is overcome if the tunnel interface has a sufficiently large resistance.

A general circuit model for spintronic devices under electric and magnetic fields

KAUST Repository

Alawein, Meshal

2017-10-25

In this work, we present a circuit model of diffusive spintronic devices capable of capturing the effects of both electric and magnetic fields. Starting from a modified version of the well-established drift-diffusion equations, we derive general equivalent circuit models of semiconducting/metallic nonmagnets and metallic ferromagnets. In contrast to other models that are based on steady-state transport equations which might also neglect certain effects such as thermal fluctuations, spin dissipation in the ferromagnets, and spin precession under magnetic fields, our model incorporates most of the important physics and is based on a time-dependent formulation. An application of our model is shown through simulations of a nonlocal spin-valve under the presence of a magnetic field, where we reproduce experimental results of electrical measurements that demonstrate the phenomena of spin precession and dephasing (“Hanle effect”).

Evaluating the effectiveness of methods for capturing meetings

OpenAIRE

Hall, Mark John; Bermell-Garcia, Pablo; McMahon, Chris A.; Johansson, Anders; Gonzalez-Franco, Mar

2015-01-01

The purpose of this paper is to evaluate the effectiveness of commonly used methods to capture synchronous meetings for information and knowledge retrieval. Four methods of capture are evaluated in the form of a case study whereby a technical design meeting was captured by; (i) transcription; (ii) diagrammatic argumentation; (iii) meeting minutes; and (iv) video. The paper describes an experiment where participants undertook an information retrieval task and provided feedback on the methods. ...

Performance Characterization of the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) CCD Cameras

Science.gov (United States)

Joiner, R. K.; Kobayashi, K.; Winebarger, A. R.; Champey, P. R.

2014-12-01

The Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) is a sounding rocket instrument which is currently being developed by NASA's Marshall Space Flight Center (MSFC) and the National Astronomical Observatory of Japan (NAOJ). The goal of this instrument is to observe and detect the Hanle effect in the scattered Lyman-Alpha UV (121.6nm) light emitted by the Sun's Chromosphere to make measurements of the magnetic field in this region. In order to make accurate measurements of this effect, the performance characteristics of the three on-board charge-coupled devices (CCDs) must meet certain requirements. These characteristics include: quantum efficiency, gain, dark current, noise, and linearity. Each of these must meet predetermined requirements in order to achieve satisfactory performance for the mission. The cameras must be able to operate with a gain of no greater than 2 e-/DN, a noise level less than 25e-, a dark current level which is less than 10e-/pixel/s, and a residual non-linearity of less than 1%. Determining these characteristics involves performing a series of tests with each of the cameras in a high vacuum environment. Here we present the methods and results of each of these performance tests for the CLASP flight cameras.

Electromagnetically Induced Absorption (EIA) and a ``Twist'' on Nonlinear Magneto-optical Rotation (NMOR) with Cold Atoms

Science.gov (United States)

Kunz, Paul; Meyer, David; Quraishi, Qudsia

2015-05-01

Within the class of nonlinear optical effects that exhibit sub-natural linewidth features, electromagnetically induced transparency (EIT) and nonlinear magneto-optical rotation (NMOR) stand out as having made dramatic impacts on various applications including atomic clocks, magnetometry, and single photon storage. A related effect, known as electromagnetically induced absorption (EIA), has received less attention in the literature. Here, we report on the first observation of EIA in cold atoms using the Hanle configuration, where a single laser beam is used to both pump and probe the atoms while sweeping a magnetic field through zero along the beam direction. We find that, associated with the EIA peak, a ``twist'' appears in the corresponding NMOR signal. A similar twist has been previously noted by Budker et al., in the context of warm vapor optical magnetometry, and was ascribed to optical pumping through nearby hyperfine levels. By studying this feature through numerical simulations and cold atom experiments, thus rendering the hyperfine levels well resolved, we enhance the understanding of the optical pumping mechanism behind it, and elucidate its relation to EIA. Finally, we demonstrate a useful application of these studies through a simple and rapid method for nulling background magnetic fields within our atom chip apparatus.

Irradiation as an effective method of food conservation

International Nuclear Information System (INIS)

Stachowicz, W.

1994-01-01

Irradiation as an effective method for food preservation has been introduced. The worldwide history of radiation methods development has been shown. The state of art of international legislation connected with food irradiation and licensing of that technology in different countries has been reviewed. The list of food products commonly accepted for radiation conservation has also been performed

Extending existing structural identifiability analysis methods to mixed-effects models.

Science.gov (United States)

Janzén, David L I; Jirstrand, Mats; Chappell, Michael J; Evans, Neil D

2018-01-01

The concept of structural identifiability for state-space models is expanded to cover mixed-effects state-space models. Two methods applicable for the analytical study of the structural identifiability of mixed-effects models are presented. The two methods are based on previously established techniques for non-mixed-effects models; namely the Taylor series expansion and the input-output form approach. By generating an exhaustive summary, and by assuming an infinite number of subjects, functions of random variables can be derived which in turn determine the distribution of the system's observation function(s). By considering the uniqueness of the analytical statistical moments of the derived functions of the random variables, the structural identifiability of the corresponding mixed-effects model can be determined. The two methods are applied to a set of examples of mixed-effects models to illustrate how they work in practice. Copyright © 2017 Elsevier Inc. All rights reserved.

[Methods of gonad protection against effects of chemotherapy].

Science.gov (United States)

Kowalska, A

1994-05-01

Together with increasing therapeutic effectiveness neoplastic diseases, the interest in late consequences of adverse effects of chemotherapy is increasing. Such problems include disturbances of gonad function. Treatment of neoplastic diseases leads frequently to infertility and hormonal disturbances resulting from damages to the gonads. Many attempts have been undertaken at protection of the gonads against unfavourable action of drugs. They are based mainly on the "interruption" of the hypothalamo-hypophyseo-gonadal axis in order to make the gonads quiescent. Other direction includes the influence on the metabolism of oncological drugs aimed at inhibition of the development of gonadotoxic derivatives. Another method includes appropriate choice of cytostatics: antimetabolites exert weaker unfavourable action on the gonads than alkylating drugs. The problem of gonad protection remains open. Searching is necessary for drugs without gonadotoxic action and effective methods of protection.

Efficient methods for including quantum effects in Monte Carlo calculations of large systems: extension of the displaced points path integral method and other effective potential methods to calculate properties and distributions.

Science.gov (United States)

Mielke, Steven L; Dinpajooh, Mohammadhasan; Siepmann, J Ilja; Truhlar, Donald G

2013-01-07

We present a procedure to calculate ensemble averages, thermodynamic derivatives, and coordinate distributions by effective classical potential methods. In particular, we consider the displaced-points path integral (DPPI) method, which yields exact quantal partition functions and ensemble averages for a harmonic potential and approximate quantal ones for general potentials, and we discuss the implementation of the new procedure in two Monte Carlo simulation codes, one that uses uncorrelated samples to calculate absolute free energies, and another that employs Metropolis sampling to calculate relative free energies. The results of the new DPPI method are compared to those from accurate path integral calculations as well as to results of two other effective classical potential schemes for the case of an isolated water molecule. In addition to the partition function, we consider the heat capacity and expectation values of the energy, the potential energy, the bond angle, and the OH distance. We also consider coordinate distributions. The DPPI scheme performs best among the three effective potential schemes considered and achieves very good accuracy for all of the properties considered. A key advantage of the effective potential schemes is that they display much lower statistical sampling variances than those for accurate path integral calculations. The method presented here shows great promise for including quantum effects in calculations on large systems.

METHODS OF DIAGNOSTIC EFFECTIVENESS ORGANIZATIONAL CHANGES IN CARGO MOTOR TRANSPORTATION ORGANIZATIONS

Directory of Open Access Journals (Sweden)

Denis Sergeevich Antipov

2017-03-01

Full Text Available The article propose methods of diagnostic effectiveness organizational changes in cargo motor transportation organizations. The article contain the main results approbation of the developed methods of diagnostic effectiveness organizational changes in cargo motor transportation organizations in 37 cargo motor transportation organizations of Saint-Petersburg and the Leningrad Region. Constructed diagrams of conformity specific weights resulting from organizational changes in cargo motor transportation organizations. Presents diagrams effectiveness organizational changes in cargo motor transportation organizations at every stages of the life cycle. The goal of the present paper is to development methods of diagnostic effectiveness organizational changes in cargo motor transportation organizations.

Analysis of experts' perception of the effectiveness of teaching methods

Science.gov (United States)

Kindra, Gurprit S.

1984-03-01

The present study attempts to shed light on the perceptions of business educators regarding the effectiveness of six methodologies in achieving Gagné's five learning outcomes. Results of this study empirically confirm the oft-stated contention that no one method is globally effective for the attainment of all objectives. Specifically, business games, traditional lecture, and case study methods are perceived to be most effective for the learning of application, knowledge acquisition, and analysis and application, respectively.

VizieR Online Data Catalog: Chemical analysis of CH stars. II. (Karinkuzhi+, 2015)

Science.gov (United States)

Karinkuzhi, D.; Goswami, A.

2017-10-01

Low-resolution spectra of these objects obtained from 2m Himalayan Chandra Telescope at the Indian Astronomical Observatory, Hanle using HFOSC clearly show strong features due to carbon. HFOSC is an optical imager cum spectrograph for conducting low- and medium-resolution grism spectroscopy (http://www.iiap.res.in/iao/hfosc.html). High-resolution spectra necessary for abundance analyses of the programme stars are taken from the ELODIE archive (Moultaka et al. 2004PASP..116..693M). (7 data files).

The Views of Turkish Pre-Service Teachers about Effectiveness of Cluster Method as a Teaching Writing Method

Science.gov (United States)

Kitis, Emine; Türkel, Ali

2017-01-01

The aim of this study is to find out Turkish pre-service teachers' views on effectiveness of cluster method as a writing teaching method. The Cluster Method can be defined as a connotative creative writing method. The way the method works is that the person who brainstorms on connotations of a word or a concept in abscence of any kind of…

Effect of Concentrated Language Encounter Method in Developing ...

African Journals Online (AJOL)

The paper examined the effect of concentrated language encounter method in developing sight word recognition skill in primary school pupils in cross river state. The purpose of the study was to find out the effect of Primary One pupils' reading level, English sight word recognition skill. It also examine the extent to which the ...

Multishell method: Exact treatment of a cluster in an effective medium

International Nuclear Information System (INIS)

Gonis, A.; Garland, J.W.

1977-01-01

A method is presented for the exact determination of the Green's function of a cluster embedded in a given effective medium. This method, the multishell method, is applicable even to systems with off-diagonal disorder, extended-range hopping, multiple bands, and/or hybridization, and is computationally practicable for any system described by a tight-binding or interpolation-scheme Hamiltonian. It allows one to examine the effects of local environment on the densities of states and site spectral weight functions of disordered systems. For any given analytic effective medium characterized by a non-negative density of states the method yields analytic cluster Green's functions and non-negative site spectral weight functions. Previous methods used for the calculation of the Green's function of a cluster embedded in a given effective medium have not been exact. The results of numerical calculations for model systems show that even the best of these previous methods can lead to substantial errors, at least for small clusters in two- and three-dimensional lattices. These results also show that fluctuations in local environment have large effects on site spectral weight functions, even in cases in which the single-site coherent-potential approximation yields an accurate overall density of states

Constraining Line-of-sight Confusion in the Corona Using Linearly Polarized Observations of the Infrared FeXIII 1075nm and SiX 1430nm Emission Lines

Science.gov (United States)

Dima, G. I.; Kuhn, J. R.; Berdyugina, S.

2017-12-01

Measurements of the coronal magnetic field are difficult because of the intrinsically faint emission of coronal plasma and the large spurious background due to the bright solar disk. This work addresses the problem of resolving the confusion of the line-of-sight (LOS) integration through the optically-thin corona being observed. Work on developing new measuring techniques based on single-point inversions using the Hanle effect has already been described (Dima et al. 2016). It is important to develop a technique to assess when the LOS confusion makes comparing models and observations problematic. Using forward integration of synthetic emission through magnetohydrodynamic (MHD) models together with simultaneous linearly polarized observations of the FeXIII 1075nm and SiX 1430nm emission lines allows us to assess LOS confusion. Since the lines are both in the Hanle saturated regime their polarization angles are expected to be aligned as long as the gas is sampling the same magnetic field. If significant contributions to the emission is taking place from different regions along the LOS due to the additive nature of the polarized brightness the measured linear polarization between the two lines will be offset. The size of the resolution element is important for this determination since observing larger coronal regions will confuse the variation along the LOS with that in the plane-of-sky. We also present comparisons between synthetic linearly polarized emission through a global MHD model and observations of the same regions obtained using the 0.5m Scatter-free Observatory for Limb Active Regions and Coronae (SOLARC) telescope located on Haleakala, Maui. This work is being done in preparation for the type of observations that will become possible when the next generation 4m DKIST telescope comes online in 2020.

Calibration Method to Eliminate Zeroth Order Effect in Lateral Shearing Interferometry

Science.gov (United States)

Fang, Chao; Xiang, Yang; Qi, Keqi; Chen, Dawei

2018-04-01

In this paper, a calibration method is proposed which eliminates the zeroth order effect in lateral shearing interferometry. An analytical expression of the calibration error function is deduced, and the relationship between the phase-restoration error and calibration error is established. The analytical results show that the phase-restoration error introduced by the calibration error is proportional to the phase shifting error and zeroth order effect. The calibration method is verified using simulations and experiments. The simulation results show that the phase-restoration error is approximately proportional to the phase shift error and zeroth order effect, when the phase shifting error is less than 2° and the zeroth order effect is less than 0.2. The experimental result shows that compared with the conventional method with 9-frame interferograms, the calibration method with 5-frame interferograms achieves nearly the same restoration accuracy.

Application of Canonical Effective Methods to Background-Independent Theories

Science.gov (United States)

Buyukcam, Umut

Effective formalisms play an important role in analyzing phenomena above some given length scale when complete theories are not accessible. In diverse exotic but physically important cases, the usual path-integral techniques used in a standard Quantum Field Theory approach seldom serve as adequate tools. This thesis exposes a new effective method for quantum systems, called the Canonical Effective Method, which owns particularly wide applicability in backgroundindependent theories as in the case of gravitational phenomena. The central purpose of this work is to employ these techniques to obtain semi-classical dynamics from canonical quantum gravity theories. Application to non-associative quantum mechanics is developed and testable results are obtained. Types of non-associative algebras relevant for magnetic-monopole systems are discussed. Possible modifications of hypersurface deformation algebra and the emergence of effective space-times are presented. iii.

Cost-Effectiveness Analysis of Three Leprosy Case Detection Methods in Northern Nigeria

Science.gov (United States)

Ezenduka, Charles; Post, Erik; John, Steven; Suraj, Abdulkarim; Namadi, Abdulahi; Onwujekwe, Obinna

2012-01-01

Background Despite several leprosy control measures in Nigeria, child proportion and disability grade 2 cases remain high while new cases have not significantly reduced, suggesting continuous spread of the disease. Hence, there is the need to review detection methods to enhance identification of early cases for effective control and prevention of permanent disability. This study evaluated the cost-effectiveness of three leprosy case detection methods in Northern Nigeria to identify the most cost-effective approach for detection of leprosy. Methods A cross-sectional study was carried out to evaluate the additional benefits of using several case detection methods in addition to routine practice in two north-eastern states of Nigeria. Primary and secondary data were collected from routine practice records and the Nigerian Tuberculosis and Leprosy Control Programme of 2009. The methods evaluated were Rapid Village Survey (RVS), Household Contact Examination (HCE) and Traditional Healers incentive method (TH). Effectiveness was measured as number of new leprosy cases detected and cost-effectiveness was expressed as cost per case detected. Costs were measured from both providers' and patients' perspectives. Additional costs and effects of each method were estimated by comparing each method against routine practise and expressed as incremental cost-effectiveness ratio (ICER). All costs were converted to the U.S. dollar at the 2010 exchange rate. Univariate sensitivity analysis was used to evaluate uncertainties around the ICER. Results The ICER for HCE was $142 per additional case detected at all contact levels and it was the most cost-effective method. At ICER of $194 per additional case detected, THs method detected more cases at a lower cost than the RVS, which was not cost-effective at $313 per additional case detected. Sensitivity analysis showed that varying the proportion of shared costs and subsistent wage for valuing unpaid time did not significantly change the

Effect of drying method on properties of vanadium-molybdenum oxide catalysts

International Nuclear Information System (INIS)

Gorshkova, T.P.; Savchenko, L.A.; Tarasova, D.V.; Tret'yakov, Yu.D.; Olen'kova, I.P.; Nikoro, T.A.; Maksimov, N.G.

1981-01-01

Effect of drying method of molybdenum and vanadium salt solutions on physicochemical and catalytical properties of vanadium-molybdenum catalysts is studied. It is shown that the drying method of solutions determines the completeness of vanadium binding into oxide vanadium-molybdenum compounds and thus effects the activity and selectivity of catalysts in acrolein oxidation into acrylic acid. Besides the drying method determines the porous structure of catalysts [ru

Application of effective variance method for contamination monitor calibration

International Nuclear Information System (INIS)

Goncalez, O.L.; Freitas, I.S.M. de.

1990-01-01

In this report, the calibration of a thin window Geiger-Muller type monitor for alpha superficial contamination is presented. The calibration curve is obtained by the method of the least-squares fitting with effective variance. The method and the approach for the calculation are briefly discussed. (author)

Effect of Fermentation Methods on the Nutrient Profile and ...

African Journals Online (AJOL)

Objective: This study evaluated the effect of fermentation method on the nutrient profile and organoleptic characteristics of African oil bean seed (Pentaclethra macrophylla Benth). Materials and Methods: Dry and mature African oil bean seeds were cleaned, boiled, dehulled, cooked, sliced/pulverized and fermented to ugba ...

Review of experimental methods for evaluating effective delayed neutron fraction

Energy Technology Data Exchange (ETDEWEB)

Yamane, Yoshihiro [Nagoya Univ. (Japan). School of Engineering

1997-03-01

The International Effective Delayed Neutron Fraction ({beta}{sub eff}) Benchmark Experiments have been carried out at the Fast Critical Assembly of Japan Atomic Energy Research Institute since 1995. Researchers from six countries, namely France, Italy, Russia, U.S.A., Korea, and Japan, participate in this FCA project. Each team makes use of each experimental method, such as Frequency Method, Rossi-{alpha} Method, Nelson Number Method, Cf Neutron Source Method, and Covariance Method. In this report these experimental methods are reviewed. (author)

Effectiveness of various transport synthetic acceleration methods with and without GMRES

International Nuclear Information System (INIS)

Chang, J.H.; Adams, M.L.

2005-01-01

We explore the effectiveness of three types of transport synthetic acceleration (TSA) methods as stand-alone methods and as pre-conditioners within the GMRES Krylov solver. The three types are β TSA, 'stretched' TSA, and 'stretched and filtered' (SF) TSA. We analyzed the effectiveness of these algorithms using Fourier mode analysis of model two-dimensional problems with periodic boundary conditions, including problems with alternating layers of different materials. The analyses revealed that both β-TSA and stretched TSA can diverge for fairly weak heterogeneities. Performance of SF TSA, even with the optimum filtering parameter, degrades with heterogeneity. However, with GMRES, all TSA methods are convergent. SF TSA with the optimum filtering parameter was the most effective method. Numerical results support our Fourier mode analysis. (authors)

Measuring Coronal Magnetic Fields with Remote Sensing Observations of Shock Waves

Energy Technology Data Exchange (ETDEWEB)

Bemporad, Alessandro; Susino, Roberto; Frassati, Federica; Fineschi, Silvano, E-mail: bemporad@oato.inaf.it [INAF, Turin Astrophysical Observatory, Pino Torinese (Italy)

2016-05-27

Our limited knowledge of the magnetic fields structuring in the solar corona represents today the main hurdle in our understanding of its structure and dynamic. Over the last decades significant efforts have been dedicated to measure these fields, by approaching the problem on many different sides and in particular: (i) by improving our theoretical understanding of the modification (via Zeeman and Hanle effects) induced by these fields on the polarization of coronal emission lines, (ii) by developing new instrumentation to measure directly with spectro-polarimeters these modifications, (iii) by improving the reliability of the extrapolated coronal fields starting from photospheric measurements, (iv) by developing new techniques to analyse existing remote sensing data and infer properties of these fields, or by combining all these different approaches (e.g., Chifu et al.,).

Load forecasting method considering temperature effect for distribution network

Directory of Open Access Journals (Sweden)

Meng Xiao Fang

2016-01-01

Full Text Available To improve the accuracy of load forecasting, the temperature factor was introduced into the load forecasting in this paper. This paper analyzed the characteristics of power load variation, and researched the rule of the load with the temperature change. Based on the linear regression analysis, the mathematical model of load forecasting was presented with considering the temperature effect, and the steps of load forecasting were given. Used MATLAB, the temperature regression coefficient was calculated. Using the load forecasting model, the full-day load forecasting and time-sharing load forecasting were carried out. By comparing and analyzing the forecast error, the results showed that the error of time-sharing load forecasting method was small in this paper. The forecasting method is an effective method to improve the accuracy of load forecasting.

Investigation of drag effect using the field signature method

International Nuclear Information System (INIS)

Wan, Zhengjun; Liao, Junbi; Tian, Gui Yun; Cheng, Liang

2011-01-01

The potential drop (PD) method is an established non-destructive evaluation (NDE) technique. The monitoring of internal corrosion, erosion and cracks in piping systems, based on electrical field mapping or direct current potential drop array, is also known as the field signature method (FSM). The FSM has been applied in the field of submarine pipe monitoring and land-based oil and gas transmission pipes and containers. In the experimental studies, to detect and calculate the degree of pipe corrosion, the FSM analyses the relationships between the electrical resistance and pipe thickness using an electrode matrix. The relevant drag effect or trans-resistance will cause a large margin of error in the application of resistance arrays. It is the first time that the drag effect in the paper is investigated and analysed in resistance networks with the help of the FSM. Subsequently, a method to calculate the drag factors and eliminate its errors is proposed and presented. Theoretical analysis, simulation and experimental results show that the measurement accuracy can be improved by eliminating the errors caused by the drag effect

The Transfer of Resonance Line Polarization with Partial Frequency Redistribution in the General Hanle–Zeeman Regime

Energy Technology Data Exchange (ETDEWEB)

Ballester, E. Alsina; Bueno, J. Trujillo [Instituto de Astrofísica de Canarias, E-38205 La Laguna, Tenerife (Spain); Belluzzi, L., E-mail: ealsina@iac.es [Istituto Ricerche Solari Locarno, CH-6605 Locarno Monti (Switzerland)

2017-02-10

The spectral line polarization encodes a wealth of information about the thermal and magnetic properties of the solar atmosphere. Modeling the Stokes profiles of strong resonance lines is, however, a complex problem both from a theoretical and computational point of view, especially when partial frequency redistribution (PRD) effects need to be taken into account. In this work, we consider a two-level atom in the presence of magnetic fields of arbitrary intensity (Hanle–Zeeman regime) and orientation, both deterministic and micro-structured. Working within the framework of a rigorous PRD theoretical approach, we have developed a numerical code that solves the full non-LTE radiative transfer problem for polarized radiation, in one-dimensional models of the solar atmosphere, accounting for the combined action of the Hanle and Zeeman effects, as well as for PRD phenomena. After briefly discussing the relevant equations, we describe the iterative method of solution of the problem and the numerical tools that we have developed and implemented. We finally present some illustrative applications to two resonance lines that form at different heights in the solar atmosphere, and provide a detailed physical interpretation of the calculated Stokes profiles. We find that magneto-optical effects have a strong impact on the linear polarization signals that PRD effects produce in the wings of strong resonance lines. We also show that the weak-field approximation has to be used with caution when PRD effects are considered.

Facilities at Indian Institute of Astrophysics and New Initiatives

Science.gov (United States)

Bhatt, Bhuwan Chandra

2018-04-01

The Indian Institute of Astrophysics is a premier national institute of India for the study of and research into topics pertaining to astronomy, astrophysics and related subjects. The Institute's main campus in Bangalore city in southern India houses the main administrative set up, library and computer center, photonics lab and state of art mechanical workshop. IIA has a network of laboratories and observatories located in various places in India, including Kodaikanal (Tamilnadu), Kavalur (Tamilnadu), Gauribidanur (Karnataka), Leh & Hanle (Jammu & Kashmir) and Hosakote (Karnataka).

The effect of Montessori Method on teaching cultural and creative ...

African Journals Online (AJOL)

The Effect of the Montessori Method on teaching was investigated among children to discover their artistic development in Zaria, Kaduna State. The problem of the study is that the Montessori Method on teaching cultural and creative arts is not adequately explored in the primary schools, while other teaching methods used, ...

The Effectiveness of Fraud Prevention and Detection Methods at Universities in Indonesia

OpenAIRE

Zamzami, Faiz; Nusa, Nabella Duta; Timur, Rudi Prasetya

2016-01-01

Some cases of corruption have taken place in several universities in Indonesia. To prevent and handle the cases, internal auditors play pivotal roles in detecting and preventing fraud. Therefore, effective methods to detect and prevent fraud are needed. The methods are expected to set the appropriate measures to detect and prevent fraud effectively. This research proposed a question how the internal auditors perceive the effectiveness of fraud detection and prevention methods. The research ai...

Method of phase-Doppler anemometry free from the measurement-volume effect.

Science.gov (United States)

Qiu, H; Hsu, C T

1999-05-01

A novel method is developed to improve the accuracy of particle sizing in laser phase-Doppler anemometry (PDA). In this method the vector sum of refractive and reflective rays is taken into consideration in describing a dual-mechanism-scattering model caused by a nonuniformly illuminated PDA measurement volume. The constraint of the single-mechanism-scattering model in the conventional PDA is removed. As a result the error caused by the measurement-volume effect, which consists of a Gaussian-beam defect and a slit effect, can be eliminated. This new method can be easily implemented with minimal modification of the conventional PDA system. The results of simulation based on the generalized Lorenz-Mie theory show that the new method can provide a PDA system free from the measurement-volume effect.

Work Stress Interventions in Hospital Care: Effectiveness of the DISCovery Method

Directory of Open Access Journals (Sweden)

Irene Niks

2018-02-01

Full Text Available Effective interventions to prevent work stress and to improve health, well-being, and performance of employees are of the utmost importance. This quasi-experimental intervention study presents a specific method for diagnosis of psychosocial risk factors at work and subsequent development and implementation of tailored work stress interventions, the so-called DISCovery method. This method aims at improving employee health, well-being, and performance by optimizing the balance between job demands, job resources, and recovery from work. The aim of the study is to quantitatively assess the effectiveness of the DISCovery method in hospital care. Specifically, we used a three-wave longitudinal, quasi-experimental multiple-case study approach with intervention and comparison groups in health care work. Positive changes were found for members of the intervention groups, relative to members of the corresponding comparison groups, with respect to targeted work-related characteristics and targeted health, well-being, and performance outcomes. Overall, results lend support for the effectiveness of the DISCovery method in hospital care.

Work Stress Interventions in Hospital Care: Effectiveness of the DISCovery Method.

Science.gov (United States)

Niks, Irene; de Jonge, Jan; Gevers, Josette; Houtman, Irene

2018-02-13

Effective interventions to prevent work stress and to improve health, well-being, and performance of employees are of the utmost importance. This quasi-experimental intervention study presents a specific method for diagnosis of psychosocial risk factors at work and subsequent development and implementation of tailored work stress interventions, the so-called DISCovery method. This method aims at improving employee health, well-being, and performance by optimizing the balance between job demands, job resources, and recovery from work. The aim of the study is to quantitatively assess the effectiveness of the DISCovery method in hospital care. Specifically, we used a three-wave longitudinal, quasi-experimental multiple-case study approach with intervention and comparison groups in health care work. Positive changes were found for members of the intervention groups, relative to members of the corresponding comparison groups, with respect to targeted work-related characteristics and targeted health, well-being, and performance outcomes. Overall, results lend support for the effectiveness of the DISCovery method in hospital care.

Work Stress Interventions in Hospital Care: Effectiveness of the DISCovery Method

Science.gov (United States)

Niks, Irene; Gevers, Josette

2018-01-01

Effective interventions to prevent work stress and to improve health, well-being, and performance of employees are of the utmost importance. This quasi-experimental intervention study presents a specific method for diagnosis of psychosocial risk factors at work and subsequent development and implementation of tailored work stress interventions, the so-called DISCovery method. This method aims at improving employee health, well-being, and performance by optimizing the balance between job demands, job resources, and recovery from work. The aim of the study is to quantitatively assess the effectiveness of the DISCovery method in hospital care. Specifically, we used a three-wave longitudinal, quasi-experimental multiple-case study approach with intervention and comparison groups in health care work. Positive changes were found for members of the intervention groups, relative to members of the corresponding comparison groups, with respect to targeted work-related characteristics and targeted health, well-being, and performance outcomes. Overall, results lend support for the effectiveness of the DISCovery method in hospital care. PMID:29438350

Influence of non-binary effects on intranuclear cascade method

International Nuclear Information System (INIS)

Gomes, E.H.C.

1985-01-01

The importance of non binary process effects in the intranuclear cascade method is analysed. It is shown that, in the higher density steps, the non binary collisions lead to baryon density distribution and rapidity differents from the one obtained using the usual intranuclear cascade method (limited to purely binary collisions). The validity of the applications of binary intranuclear cascade method to the simulation of the thermal equilibrium, nuclear transparency and particle production, is discussed. (M.C.K.) [pt

Investigation of evaluation methods for human factors education effectiveness

International Nuclear Information System (INIS)

Yoshimura, Seiichi; Fujimoto, Junzo; Sasou Kunihide; Hasegawa, Naoko

2004-01-01

Education effectiveness in accordance with investment is required in the steam of electric power regulation alleviation. Therefore, evaluation methods for human factors education effectiveness which can observe human factors culture pervading process were investigated through research activities on education effectiveness in universities and actual in house education in industry companies. As a result, the contents of evaluation were found to be the change of feeling for human factors and some improving proposals in work places when considering the purpose of human factors education. And, questionnaire is found to be suitable for the style of evaluation. In addition, the timing of evaluation is desirable for both just after education and after some period in work places. Hereafter, data will be collected using these two kinds of questionnaires in human factors education courses in CRIEPI and some education courses in utilities. Thus, education effectiveness evaluation method which is suitable for human factors will be established. (author)

Bias correction for estimated QTL effects using the penalized maximum likelihood method.

Science.gov (United States)

Zhang, J; Yue, C; Zhang, Y-M

2012-04-01

A penalized maximum likelihood method has been proposed as an important approach to the detection of epistatic quantitative trait loci (QTL). However, this approach is not optimal in two special situations: (1) closely linked QTL with effects in opposite directions and (2) small-effect QTL, because the method produces downwardly biased estimates of QTL effects. The present study aims to correct the bias by using correction coefficients and shifting from the use of a uniform prior on the variance parameter of a QTL effect to that of a scaled inverse chi-square prior. The results of Monte Carlo simulation experiments show that the improved method increases the power from 25 to 88% in the detection of two closely linked QTL of equal size in opposite directions and from 60 to 80% in the identification of QTL with small effects (0.5% of the total phenotypic variance). We used the improved method to detect QTL responsible for the barley kernel weight trait using 145 doubled haploid lines developed in the North American Barley Genome Mapping Project. Application of the proposed method to other shrinkage estimation of QTL effects is discussed.

Inverse Scattering Method and Soliton Solution Family for String Effective Action

International Nuclear Information System (INIS)

Ya-Jun, Gao

2009-01-01

A modified Hauser–Ernst-type linear system is established and used to develop an inverse scattering method for solving the motion equations of the string effective action describing the coupled gravity, dilaton and Kalb–Ramond fields. The reduction procedures in this inverse scattering method are found to be fairly simple, which makes the proposed inverse scattering method applied fine and effective. As an application, a concrete family of soliton solutions for the considered theory is obtained

Effective atomic numbers of some tissue substitutes by different methods: A comparative study

Directory of Open Access Journals (Sweden)

Vishwanath P Singh

2014-01-01

Full Text Available Effective atomic numbers of some human organ tissue substitutes such as polyethylene terephthalate, red articulation wax, paraffin 1, paraffin 2, bolus, pitch, polyphenylene sulfide, polysulfone, polyvinylchloride, and modeling clay have been calculated by four different methods like Auto-Z eff, direct, interpolation, and power law. It was found that the effective atomic numbers computed by Auto-Z eff , direct and interpolation methods were in good agreement for intermediate energy region (0.1 MeV < E < 5 MeV where the Compton interaction dominates. A large difference in effective atomic numbers by direct method and Auto-Z eff was observed in photo-electric and pair-production regions. Effective atomic numbers computed by power law were found to be close to direct method in photo-electric absorption region. The Auto-Z eff , direct and interpolation methods were found to be in good agreement for computation of effective atomic numbers in intermediate energy region (100 keV < E < 10 MeV. The direct method was found to be appropriate method for computation of effective atomic numbers in photo-electric region (10 keV < E < 100 keV. The tissue equivalence of the tissue substitutes is possible to represent by any method for computation of effective atomic number mentioned in the present study. An accurate estimation of Rayleigh scattering is required to eliminate effect of molecular, chemical, or crystalline environment of the atom for estimation of gamma interaction parameters.

Modelling cost-effectiveness of different vasectomy methods in India, Kenya, and Mexico

Directory of Open Access Journals (Sweden)

Seamans Yancy

2007-07-01

Full Text Available Abstract Background Vasectomy is generally considered a safe and effective method of permanent contraception. The historical effectiveness of vasectomy has been questioned by recent research results indicating that the most commonly used method of vasectomy – simple ligation and excision (L and E – appears to have a relatively high failure rate, with reported pregnancy rates as high as 4%. Updated methods such as fascial interposition (FI and thermal cautery can lower the rate of failure but may require additional financial investments and may not be appropriate for low-resource clinics. In order to better compare the cost-effectiveness of these different vasectomy methods, we modelled the costs of different vasectomy methods using cost data collected in India, Kenya, and Mexico and effectiveness data from the latest published research. Methods The costs associated with providing vasectomies were determined in each country through interviews with clinic staff. Costs collected were economic, direct, programme costs of fixed vasectomy services but did not include large capital expenses or general recurrent costs for the health care facility. Estimates of the time required to provide service were gained through interviews and training costs were based on the total costs of vasectomy training programmes in each country. Effectiveness data were obtained from recent published studies and comparative cost-effectiveness was determined using cost per couple years of protection (CYP. Results In each country, the labour to provide the vasectomy and follow-up services accounts for the greatest portion of the overall cost. Because each country almost exclusively used one vasectomy method at all of the clinics included in the study, we modelled costs based on the additional material, labour, and training costs required in each country. Using a model of a robust vasectomy program, more effective methods such as FI and thermal cautery reduce the cost per

Biological effects of three different shoreline cleanup methods

Energy Technology Data Exchange (ETDEWEB)

Mattsson, J.; Lethinen, C.; Linden, O.

1981-06-01

In order to simulate a real oil spill the shore of a small island in the Baltic proper was treated with a weathered crude oil. The aim of the study was to investigate and compare environmental impact of some shoreline cleanup techniques as well as the effectiveness of these methods. Hot water was the quickest cleanup method, whereas cleaning with a solvent took twice as much time and mechanical recovery three and a half time as much. The hot water treatment resulted in the smallest amounts of oil left in the soil compared to the two other methods, where two to three times as much was left. The oil content in sedimenting material and in mussels was highest outside the area cleaned with hot water. The oil content in mussel tissues increased 75 times after cleaning and the sediment contained about twice as much oil as outside the other areas. The vegetation on all four oiled areas was considerably reduced and the soil fauna was completely eliminated. Since no animals were found on the four oiled areas, not even on the untreated area, it appeared to be the oil itself that caused this effect. The number of animals caught with pitfall traps decreased after oiling and cleanup to between 10-40 % of the original amount. The results from the investigation of the fauna in the Cladophora-belt do not indicate any effects so far.

Methods of determining the effective dose in dental radiology

International Nuclear Information System (INIS)

Thilander-Klang, A.; Helmrot, E.

2010-01-01

A wide variety of X-ray equipment is used today in dental radiology, including intra-oral, ortho-pan-tomographic, cephalo-metric, cone-beam computed tomography (CBCT) and computed tomography (CT). This raises the question of how the radiation risks resulting from different kinds of examinations should be compared. The risk to the patient is usually expressed in terms of effective dose. However, it is difficult to determine its reliability, and it is difficult to make comparisons, especially when different modalities are used. The classification of the new CBCT units is also problematic as they are sometimes classified as CT units. This will lead to problems in choosing the best dosimetric method, especially when the examination geometry resembles more on an ordinary ortho-pan-tomographic examination, as the axis of rotation is not at the centre of the patient, and small radiation field sizes are used. The purpose of this study was to present different methods for the estimation of the effective dose from the equipment currently used in dental radiology, and to discuss their limitations. The methods are compared based on commonly used measurable and computable dose quantities, and their reliability in the estimation of the effective dose. (authors)

Experimental method for investigating helium effects in irradiated vanadium

International Nuclear Information System (INIS)

Smith, D.L.; Matsui, H.; Greenwood, L.; Loomis, B.

1987-10-01

Analyses have been performed which indicate that an effective method for experimentally investigating helium effects in neutron irradiated vanadium base alloys can be developed. The experimental procedure involves only modest modifications to existing procedures currently used for irradiation testing of vanadium-base alloys in the FFTF reactor. Helium is generated in the vanadium alloy by decay of tritium which is either preinjected or generated within the test capsule. Calculations indicate that nearly constant He/dpa ratios of desired magnitude can be attained by proper selection of experimental parameters. The proposed method could have a major impact on the development of vanadium base alloys for fusion reactor applications. 8 refs., 4 figs

Sterilization Effect of Wet Oxygen Plasma in the Bubbling Method.

Science.gov (United States)

Tamazawa, Kaoru; Shintani, Hideharu; Tamazawa, Yoshinori; Shimauchi, Hidetoshi

2015-01-01

A new low-temperature sterilization method to replace the ethylene oxide gas sterilization is needed. Strong bactericidal effects of OH and O2H radicals are well known. The purpose of this study was to evaluate the sterilization effect of wet oxygen ("O2+H2O") plasma in the bubbling method, confirming the effect of humidity. Sterility assurance was confirmed by using a biological indicator (Geobacillus stearothermophilus ATCC7953, Namsa, USA). One hundred and eight samples (10(5) spores/carrier) were divided into three groups of 36 in each for treatment with a different type of gas (O2, O2+H2O, Air+H2O). Plasma processing was conducted using a plasma ashing apparatus (13.56 MHz, PACK-3(®), Y. A. C., Japan) under various gas pressures (13, 25, 50 Pa) and gas flows (50, 100, 200 sccm). Fixed plasma treatment parameters were power at 150 W, temperature of 60 ℃, treatment time of 10 min. The samples after treatment were incubated in trypticase soy broth at 58 ℃ for 72 h. The negative culture rate in the "O2+H2O" group was significantly (Mantel-Haenszel procedure, pbubbling method which is the method of introducing vapor into the chamber. The bubbling method seems able to generate OH and O2H radicals in a stable way.

Quantitative methods for analysing cumulative effects on fish migration success: a review.

Science.gov (United States)

Johnson, J E; Patterson, D A; Martins, E G; Cooke, S J; Hinch, S G

2012-07-01

It is often recognized, but seldom addressed, that a quantitative assessment of the cumulative effects, both additive and non-additive, of multiple stressors on fish survival would provide a more realistic representation of the factors that influence fish migration. This review presents a compilation of analytical methods applied to a well-studied fish migration, a more general review of quantitative multivariable methods, and a synthesis on how to apply new analytical techniques in fish migration studies. A compilation of adult migration papers from Fraser River sockeye salmon Oncorhynchus nerka revealed a limited number of multivariable methods being applied and the sub-optimal reliance on univariable methods for multivariable problems. The literature review of fisheries science, general biology and medicine identified a large number of alternative methods for dealing with cumulative effects, with a limited number of techniques being used in fish migration studies. An evaluation of the different methods revealed that certain classes of multivariable analyses will probably prove useful in future assessments of cumulative effects on fish migration. This overview and evaluation of quantitative methods gathered from the disparate fields should serve as a primer for anyone seeking to quantify cumulative effects on fish migration survival. © 2012 The Authors. Journal of Fish Biology © 2012 The Fisheries Society of the British Isles.

Assessment of refinery effluents and receiving waters using biologically-based effect methods

International Nuclear Information System (INIS)

2012-01-01

Within the EU it is apparent that the regulatory focus on the use of biologically-based effects methods in the assessment of refinery effluents and receiving waters has increased in the past decade. This has been reflected in a recent refinery survey which revealed an increased use of such methods for assessing the quality of refinery effluents and their receiving waters. This report provides an overview of recent techniques used for this purpose. Several case studies provided by CONCAWE member companies describe the application of biological methods to effluent discharge assessment and surface water monitoring. The case studies show that when biological methods are applied to refinery effluents and receiving waters they raise different questions compared with those obtained using physical and chemical methods. Although direct measurement of the toxicity of effluent and receiving to aquatic organisms is the most cited technique, more recent efforts include tests that also address the persistence of effluent toxicity once discharged into the receiving water. Similarly, ecological monitoring of receiving waters can identify effects of effluent inputs arising from species interactions and other secondary effects that would not always be apparent from the results of biological tests conducted on single aquatic organisms. In light of recent and proposed regulatory developments the objectives of this report are therefore to: Discuss the application of biologically-based effects methods (including ecological monitoring) to refinery discharges and receiving waters; Assess the implications of such methods for future regulation of refinery discharges; and Provide guidance on good practice that can be used by refineries and the downstream oil industry to carry out and interpret data obtained using biologically-based effects methods. While the emphasis is on the toxic effects of effluents, other properties will also be covered because of their interdependency in determining

Assessment of refinery effluents and receiving waters using biologically-based effect methods

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-01-15

Within the EU it is apparent that the regulatory focus on the use of biologically-based effects methods in the assessment of refinery effluents and receiving waters has increased in the past decade. This has been reflected in a recent refinery survey which revealed an increased use of such methods for assessing the quality of refinery effluents and their receiving waters. This report provides an overview of recent techniques used for this purpose. Several case studies provided by CONCAWE member companies describe the application of biological methods to effluent discharge assessment and surface water monitoring. The case studies show that when biological methods are applied to refinery effluents and receiving waters they raise different questions compared with those obtained using physical and chemical methods. Although direct measurement of the toxicity of effluent and receiving to aquatic organisms is the most cited technique, more recent efforts include tests that also address the persistence of effluent toxicity once discharged into the receiving water. Similarly, ecological monitoring of receiving waters can identify effects of effluent inputs arising from species interactions and other secondary effects that would not always be apparent from the results of biological tests conducted on single aquatic organisms. In light of recent and proposed regulatory developments the objectives of this report are therefore to: Discuss the application of biologically-based effects methods (including ecological monitoring) to refinery discharges and receiving waters; Assess the implications of such methods for future regulation of refinery discharges; and Provide guidance on good practice that can be used by refineries and the downstream oil industry to carry out and interpret data obtained using biologically-based effects methods. While the emphasis is on the toxic effects of effluents, other properties will also be covered because of their interdependency in determining

Shielding Effectiveness Analysis and Modification of the Coupling Effect Transmission Line Method on Cavities with Multi-Sided Apertures

Directory of Open Access Journals (Sweden)

Tao Hu

2018-04-01

Full Text Available Because the traditional transmission line method treats electromagnetic waves as excitation sources and the cavity as a rectangular waveguide whose terminal is shorted, the transmission line method can only calculate shielding effectiveness in the center line of the cavity with apertures on one side. In this paper, the aperture coupling effect of different sides was analyzed based on vector analysis. According to the field intensity distribution of different transport modes in the rectangular waveguide, the calculation model of cavity shielding effectiveness in any position is proposed, which can solve the question of the calculation model of shielding effectiveness in any position in the traditional method of equivalent transmission methods. Further expansion of the equivalent transmission lines model is adopted to study the shielding effectiveness of different aperture cavities, and the coupling effect rule of the incident angle, the number of apertures, and the size of the cavity is obtained, which can provide the technical support for the design of electromagnetic shielding cavities for electronic equipment.

Methods for assessing the effects of dehydration on cognitive function.

Science.gov (United States)

Lieberman, Harris R

2012-11-01

Studying the effects of dehydration on cognitive function presents a variety of unique and difficult challenges to investigators. These challenges, which are addressed in this article, can be divided into three general categories: 1) choosing an appropriate method of generating a consistent level of dehydration; 2) determining and effectively employing appropriate and sensitive measures of cognitive state; and 3) adequately controlling the many confounding factors that interfere with assessment of cognitive function. The design and conduct of studies on the effects of dehydration on cognitive function should carefully consider various methodological issues, and investigators should carefully weigh the benefits and disadvantages of particular methods and procedures. © 2012 International Life Sciences Institute.

Index method for analyzing cost effectiveness of drilling rigs

Energy Technology Data Exchange (ETDEWEB)

Batura, N P; Bocharov, V V

1978-01-01

The method for a complete analysis of the factors determining cost effectiveness of a drilling rig fleet is examined. The system of calculating production indexes from statistical reports is relatively simple and is not difficult to use for production organizations. The analytical results may be used to develop actual measures used to increase cost effectiveness of drilling operations.

Confidence Limits for the Indirect Effect: Distribution of the Product and Resampling Methods

Science.gov (United States)

MacKinnon, David P.; Lockwood, Chondra M.; Williams, Jason

2010-01-01

The most commonly used method to test an indirect effect is to divide the estimate of the indirect effect by its standard error and compare the resulting z statistic with a critical value from the standard normal distribution. Confidence limits for the indirect effect are also typically based on critical values from the standard normal distribution. This article uses a simulation study to demonstrate that confidence limits are imbalanced because the distribution of the indirect effect is normal only in special cases. Two alternatives for improving the performance of confidence limits for the indirect effect are evaluated: (a) a method based on the distribution of the product of two normal random variables, and (b) resampling methods. In Study 1, confidence limits based on the distribution of the product are more accurate than methods based on an assumed normal distribution but confidence limits are still imbalanced. Study 2 demonstrates that more accurate confidence limits are obtained using resampling methods, with the bias-corrected bootstrap the best method overall. PMID:20157642

Methods for synthesizing findings on moderation effects across multiple randomized trials.

Science.gov (United States)

Brown, C Hendricks; Sloboda, Zili; Faggiano, Fabrizio; Teasdale, Brent; Keller, Ferdinand; Burkhart, Gregor; Vigna-Taglianti, Federica; Howe, George; Masyn, Katherine; Wang, Wei; Muthén, Bengt; Stephens, Peggy; Grey, Scott; Perrino, Tatiana

2013-04-01

This paper presents new methods for synthesizing results from subgroup and moderation analyses across different randomized trials. We demonstrate that such a synthesis generally results in additional power to detect significant moderation findings above what one would find in a single trial. Three general methods for conducting synthesis analyses are discussed, with two methods, integrative data analysis and parallel analyses, sharing a large advantage over traditional methods available in meta-analysis. We present a broad class of analytic models to examine moderation effects across trials that can be used to assess their overall effect and explain sources of heterogeneity, and present ways to disentangle differences across trials due to individual differences, contextual level differences, intervention, and trial design.

A comprehensive review of regulatory test methods for endocrine adverse health effects.

Science.gov (United States)

Manibusan, M K; Touart, L W

2017-07-01

Development of new endocrine disruption-relevant test methods has been the subject of intensive research efforts for the past several decades, prompted in part by mandates in the 1996 Food Quality Protection Act (FQPA). While scientific understanding and test methods have advanced, questions remain on whether current scientific methods are capable of adequately addressing the complexities of the endocrine system for regulatory health and ecological risk assessments. The specific objective of this article is to perform a comprehensive, detailed evaluation of the adequacy of current test methods to inform regulatory risk assessments of whether a substance has the potential to perturb endocrine-related pathways resulting in human adverse effects. To that end,  approximately 42 existing test guidelines (TGs) were considered in the evaluation of coverage for endocrine-related adverse effects. In addition to evaluations of whether test methods are adequate to capture endocrine-related effects, considerations of further enhancements to current test methods, along with the need to develop novel test methods to address existing test method gaps are described. From this specific evaluation, up to 35 test methods are capable of informing whether a chemical substance perturbs known endocrine related biological pathways. Based on these findings, it can be concluded that current validated test methods are adequate to discern substances that may perturb the endocrine system, resulting in an adverse health effect. Together, these test methods predominantly form the core data requirements of a typical food-use pesticide registration submission. It is recognized, however, that the current state of science is rapidly advancing and there is a need to update current test methods to include added enhancements to ensure continued coverage and public health and environmental protection.

The Analysis of Quadrupole Magnetic Focusing Effect by Finite Element Method

International Nuclear Information System (INIS)

Utaja

2003-01-01

Quadrupole magnets will introduce focusing effect to a beam of the charge particle passing parallel to the magnet faces. The focusing effect is need to control the particle beam, so that it is in accordance with necessity requirement stated. This paper describes the analysis of focusing effect on the quadrupole magnetic by the finite element method. The finite element method in this paper is used for solve the potential distribution of magnetic field. If the potential magnetic field distribution in every node have known, a charge particle trajectory can be traced. This charge particle trajectory will secure the focusing effect of the quadrupole magnets. (author)

Measurement of company effectiveness using analytic network process method

Science.gov (United States)

Goran, Janjić; Zorana, Tanasić; Borut, Kosec

2017-07-01

The sustainable development of an organisation is monitored through the organisation's performance, which beforehand incorporates all stakeholders' requirements in its strategy. The strategic management concept enables organisations to monitor and evaluate their effectiveness along with efficiency by monitoring of the implementation of set strategic goals. In the process of monitoring and measuring effectiveness, an organisation can use multiple-criteria decision-making methods as help. This study uses the method of analytic network process (ANP) to define the weight factors of the mutual influences of all the important elements of an organisation's strategy. The calculation of an organisation's effectiveness is based on the weight factors and the degree of fulfilment of the goal values of the strategic map measures. New business conditions influence the changes in the importance of certain elements of an organisation's business in relation to competitive advantage on the market, and on the market, increasing emphasis is given to non-material resources in the process of selection of the organisation's most important measures.

Effect of combined teaching method (role playing and storytelling ...

African Journals Online (AJOL)

Effect of combined teaching method (role playing and storytelling) on creative ... Remember me ... Background and Purpose: Storytelling promotes imagination and satisfies curiosity in children and creates learning opportunities in them.

Methods for Synthesizing Findings on Moderation Effects Across Multiple Randomized Trials

Science.gov (United States)

Brown, C Hendricks; Sloboda, Zili; Faggiano, Fabrizio; Teasdale, Brent; Keller, Ferdinand; Burkhart, Gregor; Vigna-Taglianti, Federica; Howe, George; Masyn, Katherine; Wang, Wei; Muthén, Bengt; Stephens, Peggy; Grey, Scott; Perrino, Tatiana

2011-01-01

This paper presents new methods for synthesizing results from subgroup and moderation analyses across different randomized trials. We demonstrate that such a synthesis generally results in additional power to detect significant moderation findings above what one would find in a single trial. Three general methods for conducting synthesis analyses are discussed, with two methods, integrative data analysis, and parallel analyses, sharing a large advantage over traditional methods available in meta-analysis. We present a broad class of analytic models to examine moderation effects across trials that can be used to assess their overall effect and explain sources of heterogeneity, and present ways to disentangle differences across trials due to individual differences, contextual level differences, intervention, and trial design. PMID:21360061

A Comparison of Methods to Test Mediation and Other Intervening Variable Effects

Science.gov (United States)

MacKinnon, David P.; Lockwood, Chondra M.; Hoffman, Jeanne M.; West, Stephen G.; Sheets, Virgil

2010-01-01

A Monte Carlo study compared 14 methods to test the statistical significance of the intervening variable effect. An intervening variable (mediator) transmits the effect of an independent variable to a dependent variable. The commonly used R. M. Baron and D. A. Kenny (1986) approach has low statistical power. Two methods based on the distribution of the product and 2 difference-in-coefficients methods have the most accurate Type I error rates and greatest statistical power except in 1 important case in which Type I error rates are too high. The best balance of Type I error and statistical power across all cases is the test of the joint significance of the two effects comprising the intervening variable effect. PMID:11928892

Using mixed methods effectively in prevention science: designs, procedures, and examples.

Science.gov (United States)

Zhang, Wanqing; Watanabe-Galloway, Shinobu

2014-10-01

There is growing interest in using a combination of quantitative and qualitative methods to generate evidence about the effectiveness of health prevention, services, and intervention programs. With the emerging importance of mixed methods research across the social and health sciences, there has been an increased recognition of the value of using mixed methods for addressing research questions in different disciplines. We illustrate the mixed methods approach in prevention research, showing design procedures used in several published research articles. In this paper, we focused on two commonly used mixed methods designs: concurrent and sequential mixed methods designs. We discuss the types of mixed methods designs, the reasons for, and advantages of using a particular type of design, and the procedures of qualitative and quantitative data collection and integration. The studies reviewed in this paper show that the essence of qualitative research is to explore complex dynamic phenomena in prevention science, and the advantage of using mixed methods is that quantitative data can yield generalizable results and qualitative data can provide extensive insights. However, the emphasis of methodological rigor in a mixed methods application also requires considerable expertise in both qualitative and quantitative methods. Besides the necessary skills and effective interdisciplinary collaboration, this combined approach also requires an open-mindedness and reflection from the involved researchers.

An overview of methods for comparative effectiveness research.

Science.gov (United States)

Meyer, Anne-Marie; Wheeler, Stephanie B; Weinberger, Morris; Chen, Ronald C; Carpenter, William R

2014-01-01

Comparative effectiveness research (CER) is a broad category of outcomes research encompassing many different methods employed by researchers and clinicians from numerous disciplines. The goal of cancer-focused CER is to generate new knowledge to assist cancer stakeholders in making informed decisions that will improve health care and outcomes of both individuals and populations. There are numerous CER methods that may be used to examine specific questions, including randomized controlled trials, observational studies, systematic literature reviews, and decision sciences modeling. Each has its strengths and weaknesses. To both inform and serve as a reference for readers of this issue of Seminars in Radiation Oncology as well as the broader oncology community, we describe CER and several of the more commonly used approaches and analytical methods. © 2013 Published by Elsevier Inc.

Effect of Storage Method on Nutrients Composition, Antioxidant ...

African Journals Online (AJOL)

Corchorus olitorious is a vegetable that is popularly consumed in West Africa. It is also known to be rich in nutrients. The effects of market storage methods of vegetables on nutrient composition, antioxidant contents and consumer acceptability of Corchorus olitorious were assessed at Owo, Ondo state, Southwest Nigeria.

An impact analysis of forecasting methods and forecasting parameters on bullwhip effect

Science.gov (United States)

Silitonga, R. Y. H.; Jelly, N.

2018-04-01

Bullwhip effect is an increase of variance of demand fluctuation from downstream to upstream of supply chain. Forecasting methods and forecasting parameters were recognized as some factors that affect bullwhip phenomena. To study these factors, we can develop simulations. There are several ways to simulate bullwhip effect in previous studies, such as mathematical equation modelling, information control modelling, computer program, and many more. In this study a spreadsheet program named Bullwhip Explorer was used to simulate bullwhip effect. Several scenarios were developed to show the change in bullwhip effect ratio because of the difference in forecasting methods and forecasting parameters. Forecasting methods used were mean demand, moving average, exponential smoothing, demand signalling, and minimum expected mean squared error. Forecasting parameters were moving average period, smoothing parameter, signalling factor, and safety stock factor. It showed that decreasing moving average period, increasing smoothing parameter, increasing signalling factor can create bigger bullwhip effect ratio. Meanwhile, safety stock factor had no impact to bullwhip effect.

Effectiveness of the current method of calculating member states' contributions

CERN Document Server

2002-01-01

At its Two-hundred and eighty-sixth Meeting of 19 September 2001, the Finance Committee requested the Management to re-assess the effectiveness of the current method of forecasting Net National Income (NNI) for the purposes of calculating the Member States' contributions by comparing the results of the current weighted average method with a method based on a simple arithmetic average. The Finance Committee is invited to take note of this information.

Evaluation method of radon preventing effect in underground construction

International Nuclear Information System (INIS)

Luo Shaodong; Deng Yuequan; Dong Faqin; Qu Ruixue; Xie Zhonglei

2014-01-01

Background: It's difficult to evaluate the radon prevention effect because of the short operating time of measuring instrument under the circumstances of high humidity in underground construction. Purpose: A new rapid method to evaluate the radon prevention efficiency of underground construction was introduced. Methods: The radon concentrations before and after shielding operation were determined, and according to the regularity of radon decay, the shielding rate can be calculated. Results: The results showed that radon shielding rate in underground construction remains generally stable with variation of time, and the actual relatively standard deviation was 3.95%. So the rapid determination and evaluation of radon preventing effect under special conditions in underground construction can be realized by taking shielding rate in a short time for the final shielding rate. Compared with those by the local static method in ground lab, the results were similar. Conclusion: This paper provided a prompt, accurate and practicable way for the evaluation of radon prevention in underground construction, having a certain reference value. (authors)

Effect of processing methods on the mechanical properties of engineered bamboo

OpenAIRE

Sharma, Bhavna; Gatóo, Ana; Ramage, Michael H.

2015-01-01

Engineered bamboo is increasingly explored as a material with significant potential for structural applications. The material is comprised of raw bamboo processed into a laminated composite. Commercial methods vary due to the current primary use as an architectural surface material, with processing used to achieve different colours in the material. The present work investigates the effect of two types of processing methods, bleaching and caramelisation, to determine the effect on the mechanic...

Cost-Effectiveness Analysis of Helicobacter pylori Diagnostic Methods in Patients with Atrophic Gastritis

Directory of Open Access Journals (Sweden)

Fumio Omata

2017-01-01

Full Text Available Background. There are several diagnostic methods for Helicobacter pylori (H. pylori infection. A cost-effective analysis is needed to decide on the optimal diagnostic method. The aim of this study was to determine a cost-effective diagnostic method in patients with atrophic gastritis (AG. Methods. A decision-analysis model including seven diagnostic methods was constructed for patients with AG diagnosed by esophagogastroduodenoscopy. Expected values of cost and effectiveness were calculated for each test. Results. If the prevalence of H. pylori in the patients with AG is 85% and CAM-resistant H. pylori is 30%, histology, stool H. pylori antigen (SHPAg, bacterial culture (BC, and urine H. pylori antibody (UHPAb were dominated by serum H. pylori IgG antibody (SHPAb, rapid urease test (RUT, and urea breath test (UBT. Among three undominated methods, the incremental cost-effective ratios (ICER of RUT versus SHPAb and UBT versus RUT were $214 and $1914, respectively. If the prevalence of CAM-sensitive H. pylori was less than 55%, BC was not dominated, but its H. pylori eradication success rate was 0.86. Conclusions. RUT was the most cost-effective at the current prevalence of CAM-resistant H. pylori. BC could not be selected due to its poor effectiveness even if CAM-resistant H. pylori was more than 45%.

Near resonant absorption by atoms in intense fluctuating laser fields

International Nuclear Information System (INIS)

Smith, S.J.

1994-01-01

The objective of this program was to make quantitative measurements of the effects of higher-order phase/frequency correlations in a laser beam on nonlinear optical absorption processes in atoms. The success of this program was due in large part to a unique experimental capability for modulating the extracavity beam of a stabilized (approx-lt 200 kHz) continuous-wave laser with statistically-well-characterized stochastic phase (or frequency) fluctuations, in order to synthesize laser bandwidths to ∼20 MHz (depending on noise amplitude), with profiles variable between Gaussian and Lorentzian (depending on noise bandwidth). Laser driven processes investigated included the following: (1) the optical Autler-Towns effect in the 3S 1/2 (F = 2, M F = 2) → 3P 3/2 (F = 3, M F = 3) two- level Na resonance, using a weak probe to the 4D 5/2 level; (2) the variance and spectra of fluorescence intensity fluctuations in the two-level Na resonance; (3) the Hanle effect in the 1 S 0 - 3 P 1 , transition at λ = 555.6 nm in 174 Yb; (4) absorption (and gain) of a weak probe, when the probe is a time-delayed replica of the resonant (with the two-level Na transition) pump laser; and (5) four-wave-mixing in a phase-conjugate geometry, in a sodium cell, and, finally, in a diffuse atomic sodium beam. The experimental results from these several studies have provided important confirmation of advanced theoretical methods

Improvement of gas entrainment prediction method. Introduction of surface tension effect

International Nuclear Information System (INIS)

Ito, Kei; Sakai, Takaaki; Ohshima, Hiroyuki; Uchibori, Akihiro; Eguchi, Yuzuru; Monji, Hideaki; Xu, Yongze

2010-01-01

A gas entrainment (GE) prediction method has been developed to establish design criteria for the large-scale sodium-cooled fast reactor (JSFR) systems. The prototype of the GE prediction method was already confirmed to give reasonable gas core lengths by simple calculation procedures. However, for simplification, the surface tension effects were neglected. In this paper, the evaluation accuracy of gas core lengths is improved by introducing the surface tension effects into the prototype GE prediction method. First, the mechanical balance between gravitational, centrifugal, and surface tension forces is considered. Then, the shape of a gas core tip is approximated by a quadratic function. Finally, using the approximated gas core shape, the authors determine the gas core length satisfying the mechanical balance. This improved GE prediction method is validated by analyzing the gas core lengths observed in simple experiments. Results show that the analytical gas core lengths calculated by the improved GE prediction method become shorter in comparison to the prototype GE prediction method, and are in good agreement with the experimental data. In addition, the experimental data under different temperature and surfactant concentration conditions are reproduced by the improved GE prediction method. (author)

Measurement of company effectiveness using analytic network process method

Directory of Open Access Journals (Sweden)

Goran Janjić

2017-07-01

Full Text Available The sustainable development of an organisation is monitored through the organisation’s performance, which beforehand incorporates all stakeholders’ requirements in its strategy. The strategic management concept enables organisations to monitor and evaluate their effectiveness along with efficiency by monitoring of the implementation of set strategic goals. In the process of monitoring and measuring effectiveness, an organisation can use multiple-criteria decision-making methods as help. This study uses the method of analytic network process (ANP to define the weight factors of the mutual influences of all the important elements of an organisation’s strategy. The calculation of an organisation’s effectiveness is based on the weight factors and the degree of fulfilment of the goal values of the strategic map measures. New business conditions influence the changes in the importance of certain elements of an organisation’s business in relation to competitive advantage on the market, and on the market, increasing emphasis is given to non-material resources in the process of selection of the organisation’s most important measures.

Effects of Extraction Method on the Physicochemical and ...

African Journals Online (AJOL)

The effects of improved method of extraction on the physicochemical, mycological and stability of crude Canarium Schweinfurthii fruit oil were studied. The extracted oils were then stored at 25±5oC for 24 months with samples analyzed at 6months interval for; pH, saponification value, acid value, peroxide value and iodine ...

Effective Teaching Methods--Project-based Learning in Physics

Science.gov (United States)

Holubova, Renata

2008-01-01

The paper presents results of the research of new effective teaching methods in physics and science. It is found out that it is necessary to educate pre-service teachers in approaches stressing the importance of the own activity of students, in competences how to create an interdisciplinary project. Project-based physics teaching and learning…

Consensus of recommendations guiding comparative effectiveness research methods.

Science.gov (United States)

Morton, Jacob B; McConeghy, Robert; Heinrich, Kirstin; Gatto, Nicolle M; Caffrey, Aisling R

2016-12-01

Because of an increasing demand for quality comparative effectiveness research (CER), methods guidance documents have been published, such as those from the Agency for Healthcare Research and Quality (AHRQ) and the Patient-Centered Outcomes Research Institute (PCORI). Our objective was to identify CER methods guidance documents and compare them to produce a summary of important recommendations which could serve as a consensus of CER method recommendations. We conducted a systematic literature review to identify CER methods guidance documents published through 2014. Identified documents were analyzed for methods guidance recommendations. Individual recommendations were categorized to determine the degree of overlap. We identified nine methods guidance documents, which contained a total of 312 recommendations, 97% of which were present in two or more documents. All nine documents recommended transparency and adaptation for relevant stakeholders in the interpretation and dissemination of results. Other frequently shared CER methods recommendations included: study design and operational definitions should be developed a priori and allow for replication (n = 8 documents); focus on areas with gaps in current clinical knowledge that are relevant to decision-makers (n = 7); validity of measures, instruments, and data should be assessed and discussed (n = 7); outcomes, including benefits and harms, should be clinically meaningful, and objectively measured (n = 7). Assessment for and strategies to minimize bias (n = 6 documents), confounding (n = 6), and heterogeneity (n = 4) were also commonly shared recommendations between documents. We offer a field-consensus guide based on nine CER methods guidance documents that will aid researchers in designing CER studies and applying CER methods. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Effective nucleus-nucleus potentials derived from the generator coordinate method

Energy Technology Data Exchange (ETDEWEB)

Friedrich, H; Canto, L F [Oxford Univ. (UK). Dept. of Theoretical Physics

1977-11-07

The equivalence of the generator coordinate method (GCM) and the resonating group method (RGM) and the formal equivalence of the RGM and the orthogonality condition model (OCM) lead to a relation connecting the effective nucleus-nucleus potentials of the OCM with matrix elements of the GCM. This relation may be used to derive effective nucleus-nucleus potentials directly from GCM matrix elements without explicit reference to the potentials of the RGM. In a first application local and l-independent effective potentials are derived from diagonal GCM matrix elements which represent the energy surfaces of a two-centre shell model. Using these potentials the OCM can reproduce the results of a full RGM calculation very well for the elastic scattering of two ..cap alpha..-particles and fairly well for elastic /sup 16/O-/sup 16/O scattering.

Methods and Effects of Safety Enhancement in Korean PSR

International Nuclear Information System (INIS)

Kim, Young Gab; Park, Jong Woon

2009-01-01

Periodic Safety Review (PSR) is a comprehensive study on a nuclear power plant safety, taking into account aspects such as operational history, ageing, safety analyses and advances in code and standards since the time of construction. In Korea, PSRs have been performed for 20 units and have been effectively used to obtain an overall view of actual plant safety to determine reasonable and practical modifications that should be made in order to obtain a higher level of safety approaching that of modern plants. Among many safety enhancements achieved from Korean PSRs, new safety analyses are the important methods to confirm plant safety by increasing safety margin for specific safety issues. Methods and effects of safety enhancements applied in Korean PSRs are reviewed in this paper in light of new safety analyses to obtain additional safety margins

Study on calculation methods for the effective delayed neutron fraction

International Nuclear Information System (INIS)

Irwanto, Dwi; Obara, Toru; Chiba, Go; Nagaya, Yasunobu

2011-03-01

The effective delayed neutron fraction β eff is one of the important neutronic parameters from a view point of a reactor kinetics. Several Monte-Carlo-based methods to estimate β eff have been proposed to date. In order to quantify the accuracy of these methods, we study calculation methods for β eff by analyzing various fast neutron systems including the bare spherical systems (Godiva, Jezebel, Skidoo, Jezebel-240), the reflective spherical systems (Popsy, Topsy, Flattop-23), MASURCA-R2 and MASURCA-ZONA2, and FCA XIX-1, XIX-2 and XIX-3. These analyses are performed by using SLAROM-UF and CBG for the deterministic method and MVP-II for the Monte Carlo method. We calculate β eff with various definitions such as the fundamental value β 0 , the standard definition, Nauchi's definition and Meulekamp's definition, and compare these results with each other. Through the present study, we find the following: The largest difference among the standard definition of β eff , Nauchi's β eff and Meulekamp's β eff is approximately 10%. The fundamental value β 0 is quite larger than the others in several cases. For all the cases, Meulekamp's β eff is always higher than Nauchi's β eff . This is because Nauchi's β eff considers the average neutron multiplicity value per fission which is large in the high energy range (1MeV-10MeV), while the definition of Meulekamp's β eff does not include this parameter. Furthermore, we evaluate the multi-generation effect on β eff values and demonstrate that this effect should be considered to obtain the standard definition values of β eff . (author)

Cochrane Qualitative and Implementation Methods Group guidance series-paper 5: methods for integrating qualitative and implementation evidence within intervention effectiveness reviews.

Science.gov (United States)

Harden, Angela; Thomas, James; Cargo, Margaret; Harris, Janet; Pantoja, Tomas; Flemming, Kate; Booth, Andrew; Garside, Ruth; Hannes, Karin; Noyes, Jane

2018-05-01

The Cochrane Qualitative and Implementation Methods Group develops and publishes guidance on the synthesis of qualitative and mixed-method evidence from process evaluations. Despite a proliferation of methods for the synthesis of qualitative research, less attention has focused on how to integrate these syntheses within intervention effectiveness reviews. In this article, we report updated guidance from the group on approaches, methods, and tools, which can be used to integrate the findings from quantitative studies evaluating intervention effectiveness with those from qualitative studies and process evaluations. We draw on conceptual analyses of mixed methods systematic review designs and the range of methods and tools that have been used in published reviews that have successfully integrated different types of evidence. We outline five key methods and tools as devices for integration which vary in terms of the levels at which integration takes place; the specialist skills and expertise required within the review team; and their appropriateness in the context of limited evidence. In situations where the requirement is the integration of qualitative and process evidence within intervention effectiveness reviews, we recommend the use of a sequential approach. Here, evidence from each tradition is synthesized separately using methods consistent with each tradition before integration takes place using a common framework. Reviews which integrate qualitative and process evaluation evidence alongside quantitative evidence on intervention effectiveness in a systematic way are rare. This guidance aims to support review teams to achieve integration and we encourage further development through reflection and formal testing. Copyright © 2017 Elsevier Inc. All rights reserved.

Variable scaling method and Stark effect in hydrogen atom

International Nuclear Information System (INIS)

Choudhury, R.K.R.; Ghosh, B.

1983-09-01

By relating the Stark effect problem in hydrogen-like atoms to that of the spherical anharmonic oscillator we have found simple formulas for energy eigenvalues for the Stark effect. Matrix elements have been calculated using 0(2,1) algebra technique after Armstrong and then the variable scaling method has been used to find optimal solutions. Our numerical results are compared with those of Hioe and Yoo and also with the results obtained by Lanczos. (author)

Construction of an inexpensive molecular iodine spectrometer using a self-developed Pohl wavemeter around 670 nm wavelength

International Nuclear Information System (INIS)

Barthwal, Sachin; Vudayagiri, Ashok

2015-01-01

We describe the construction of an inexpensive iodine spectrometer with a homemade iodine vapour cell and a self-developed wavemeter based on the Pohl interferometer, around the 670 nm wavelength. This can be easily realized in an undergraduate teaching laboratory to demonstrate the use of a diode laser interferometer using a Pohl interferometer and measurement of the wavelength using image processing techniques. A visible alternative to the infrared diode lasers, the 670 nm diode laser used here gives undergraduate students a chance to perform comprehensive though illustrative atomic physics experiments including the Zeeman effect, the Hanle effect, and the magneto-optic rotation effect with a little tweaking in the present spectrometer. The advantage of the spectrometer is its ease of construction with readily available optics, electronics, evacuation and glass-blowing facilities, and easy analysis algorithm to evaluate the wavelength. The self-developed algorithm of raster scanning and circular averaging gives the researcher insight into the basics of image processing techniques. Resolution approaching 0.5 nm can be easily achieved using such a simple setup. (paper)

Effect of different seeding methods on green manure biomass, soil ...

African Journals Online (AJOL)

Effect of different seeding methods on green manure biomass, soil properties and rice yield in rice-based cropping systems. ... The effects of treatments on rice yield and its components were also investigated. ... Based on the results, BBRH and PTS are good practices for production of green manure in paddy soil. Chemical ...

Effects of Jigsaw Learning Method on Students’ Self-Efficacy and Motivation to Learn

Directory of Open Access Journals (Sweden)

Dwi Nur Rachmah

2017-12-01

Full Text Available Jigsaw learning as a cooperative learning method, according to the results of some studies, can improve academic skills, social competence, behavior in learning, and motivation to learn. However, in some other studies, there are different findings regarding the effect of jigsaw learning method on self-efficacy. The purpose of this study is to examine the effects of jigsaw learning method on self-efficacy and motivation to learn in psychology students at the Faculty of Medicine, Universitas Lambung Mangkurat. The method used in the study is the experimental method using one group pre-test and post-test design. The results of the measurements before and after the use of jigsaw learning method were compared using paired samples t-test. The results showed that there is a difference in students’ self-efficacy and motivation to learn before and after subjected to the treatments; therefore, it can be said that jigsaw learning method had significant effects on self-efficacy and motivation to learn. The application of jigsaw learning model in a classroom with large number of students was the discussion of this study.

Cherenkov detectors and a new effective-mass spectrometer method

Czech Academy of Sciences Publication Activity Database

Hladký, Jan

2006-01-01

Roč. 75, - (2006), s. 854-855 ISSN 0969-806X Institutional research plan: CEZ:AV0Z10100502 Keywords : Cherenkov radiation * spectrometer * effective mass method Subject RIV: BF - Elementary Particles and High Energy Physics Impact factor: 0.868, year: 2006

Disinfecting the iPad: evaluating effective methods.

Science.gov (United States)

Howell, V; Thoppil, A; Mariyaselvam, M; Jones, R; Young, H; Sharma, S; Blunt, M; Young, P

2014-06-01

Tablet computers are increasingly used in healthcare, but they may carry nosocomial pathogens. There are few data available on how to clean an iPad effectively for use in the clinical setting. We aimed to identify the most effective method of decontaminating the Apple iPad, without causing damage, and establish the duration of any residual effect. Following contamination with a microbial broth (meticillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococcus (VRE) and Clostridium difficile), we examined efficacy of iPad disinfection in the laboratory using six different disinfectant wipes: Sani-Cloth CHG 2% (chlorhexidine 2%/alcohol 70%), Clorox, Tristel, Trigene, soap and water, and plain cloth. Following cleaning, iPads were recontaminated to examine residual activity. After 480 Sani-Cloth CHG 2% disinfecting episodes, functional and visual analysis of iPads was performed by blinded subjects. With the exception of Clostridium difficile, Sani-Cloth CHG 2% and Clorox wipes were most effective against MRSA and VRE, and they were significantly better than the Apple-recommended plain cloth (P ≤ 0.001). A substantial residual antimicrobial effect was seen for >6h after wiping the iPad with Sani-Cloth CHG 2% despite repeated recontamination and without further disinfection. The functionality or visual appearance of the iPad was not damaged by repeated use of Sani-Cloth CHG 2% wipes. Sani-Cloth CHG 2% wipes effectively disinfect the iPad against MRSA and VRE, with a residual antibacterial effect and without causing damage. Copyright © 2014 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

EFFECT OF COOKING METHODS ON AMINO ACIDS COMPOSITION OF CHICKEN MEAT

Directory of Open Access Journals (Sweden)

Thanaa Shehab

2016-01-01

Full Text Available Chicken meat is an important item in the Syrian diet. The increasing production of chickens and their potential in restaurants and food service operation implies the need for more detailed information regarding their quality and nutrient retention. Cooking methods have different effects on the values of nutrients of chicken. Therefore, this study was carried out to evaluate the effect of microwave cooking in amino acids composition of chicken meat (breast &thigh as compared with some conventional methods, i.e. boiling, pressure and roasting

Memory Effects Study of Measuring Radioactive Xenon Isotopes With β-γ Coincidence Method

International Nuclear Information System (INIS)

Jia Huaimao; Wang Shilian; Wang Jun; Li Qi; Zhao Yungang; Fan Yuanqing; Zhang Xinjun

2010-01-01

The β-γ coincidence technique is a kind of the key important method to detect radioactive xenon isotopes for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). This paper describes noble gases memory effects of β-γ coincidence detector. Xenon memory effects were measured and its influence on detector's minimum detectable activity (MDA) was evaluated. The methods of reducing xenon memory effects were studied. In conclusion, aluminium coated plastic scintillator and YAP scintillator can remarkably decrease xenon memory effects. (authors)

Effects of Feature Extraction and Classification Methods on Cyberbully Detection

Directory of Open Access Journals (Sweden)

Esra SARAÇ

2016-12-01

Full Text Available Cyberbullying is defined as an aggressive, intentional action against a defenseless person by using the Internet, or other electronic contents. Researchers have found that many of the bullying cases have tragically ended in suicides; hence automatic detection of cyberbullying has become important. In this study we show the effects of feature extraction, feature selection, and classification methods that are used, on the performance of automatic detection of cyberbullying. To perform the experiments FormSpring.me dataset is used and the effects of preprocessing methods; several classifiers like C4.5, Naïve Bayes, kNN, and SVM; and information gain and chi square feature selection methods are investigated. Experimental results indicate that the best classification results are obtained when alphabetic tokenization, no stemming, and no stopwords removal are applied. Using feature selection also improves cyberbully detection performance. When classifiers are compared, C4.5 performs the best for the used dataset.

The effects of various preservation methods on fatty acid content of ...

African Journals Online (AJOL)

The effect of various preservation methods on fatty acid content of African catfish, (Clarias gariepinus) and Nile tilapia (Oreochromis niloticus) was investigated. Fresh fish samples were obtained from swimming pool end (Gamji Gate) of River Rino, Kaduna. Preservation methods investigated were: straight smoking (SS), ...

Effective properties of textile composites: application of the Mori–Tanaka method

DEFF Research Database (Denmark)

Skocek, Jan; Zeman, Jan; Sejnoha, Michal

2008-01-01

An efficient approach to the evaluation of effective elastic properties of plain weave textile composites using the Mori-Tanaka method is presented. The method proves its potential even if applied to real material systems with various types of imperfections including the non-uniform waviness...

Safety equipment and methods for evaluating its effectiveness

Energy Technology Data Exchange (ETDEWEB)

Evdokimov, F I; Nadtoka, T B [DPI (Ukraine)

1993-05-01

Analyzes relations between technologies (especially for roof support) used in black coal mining and work safety in mines. The share of manual work and accident rate are compared for mining by narrow and wide web shearer loaders and by coal plows with powered and individual support. Protection from occupational injury is discussed at three levels: safety engineering, work organization and the human factor. A method of evaluating the social and economic effectiveness of protection from occupational injury developed at the DPI institute is presented. The method uses the knowledge of probability distribution of failure situations, failures and protective means to determine the probabilistic characteristics of the functioning of protection systems and to calculate, for a given period, the occurrence probability and mean number of accidents. Each state of the system is characterized by determined social and/or economic results. The method was used in designing equipment intended for protective power cut-off in electric mine networks.

Effect of preparation methods on dispersion stability and electrochemical performance of graphene sheets

International Nuclear Information System (INIS)

Chen, Li; Li, Na; Zhang, Mingxia; Li, Pinnan; Lin, Zhengping

2017-01-01

Chemical exfoliation is one of the most important strategies for preparing graphene. The aggregation of graphene sheets severely prevents graphene from exhibiting excellent properties. However, there are no attempts to investigate the effect of preparation methods on the dispersity of graphene sheets. In this study, three chemical exfoliation methods, including Hummers method, modified Hummers method, and improved method, were used to prepare graphene sheets. The influence of preparation methods on the structure, dispersion stability in organic solvents, and electrochemical properties of graphene sheets were investigated. Fourier transform infrared microscopy, Raman spectra, transmission electron microscopy, and UV–vis spectrophotometry were employed to analyze the structure of the as-prepared graphene sheets. The results showed that graphene prepared by improved method exhibits excellent dispersity and stability in organic solvents without any additional stabilizer or modifier, which is attributed to the completely exfoliation and regular structure. Moreover, cyclic voltammetric and electrochemical impedance spectroscopy measurements showed that graphene prepared by improved method exhibits superior electrochemical properties than that prepared by the other two methods. - Graphical abstract: Graphene oxides with different oxidation degree were obtained via three methods, and then graphene with different crystal structures were created by chemical reduction of exfoliated graphene oxides. - Highlights: • Graphene oxides with different oxidation degree were obtained via three oxidation methods. • The influence of oxidation methods on microstructure of graphene was investigated. • The effect of oxidation methods on dispersion stability of graphene was investigated. • The effect of oxidation methods on electrochemical properties of graphene was discussed.

Effect of preparation methods on dispersion stability and electrochemical performance of graphene sheets

Energy Technology Data Exchange (ETDEWEB)

Chen, Li, E-mail: chenli1981@lut.cn; Li, Na; Zhang, Mingxia; Li, Pinnan; Lin, Zhengping

2017-05-15

Chemical exfoliation is one of the most important strategies for preparing graphene. The aggregation of graphene sheets severely prevents graphene from exhibiting excellent properties. However, there are no attempts to investigate the effect of preparation methods on the dispersity of graphene sheets. In this study, three chemical exfoliation methods, including Hummers method, modified Hummers method, and improved method, were used to prepare graphene sheets. The influence of preparation methods on the structure, dispersion stability in organic solvents, and electrochemical properties of graphene sheets were investigated. Fourier transform infrared microscopy, Raman spectra, transmission electron microscopy, and UV–vis spectrophotometry were employed to analyze the structure of the as-prepared graphene sheets. The results showed that graphene prepared by improved method exhibits excellent dispersity and stability in organic solvents without any additional stabilizer or modifier, which is attributed to the completely exfoliation and regular structure. Moreover, cyclic voltammetric and electrochemical impedance spectroscopy measurements showed that graphene prepared by improved method exhibits superior electrochemical properties than that prepared by the other two methods. - Graphical abstract: Graphene oxides with different oxidation degree were obtained via three methods, and then graphene with different crystal structures were created by chemical reduction of exfoliated graphene oxides. - Highlights: • Graphene oxides with different oxidation degree were obtained via three oxidation methods. • The influence of oxidation methods on microstructure of graphene was investigated. • The effect of oxidation methods on dispersion stability of graphene was investigated. • The effect of oxidation methods on electrochemical properties of graphene was discussed.

Effective teaching methods in higher education: requirements and barriers

Directory of Open Access Journals (Sweden)

NAHID SHIRANI BIDABADI

2016-10-01

Full Text Available Introduction: Teaching is one of the main components in educational planning which is a key factor in conducting educational plans. Despite the importance of good teaching, the outcomes are far from ideal. The present qualitative study aimed to investigate effective teaching in higher education in Iran based on the experiences of best professors in the country and the best local professors of Isfahan University of Technology. Methods: This qualitative content analysis study was conducted through purposeful sampling. Semi-structured interviews were conducted with ten faculty members (3 of them from the best professors in the country and 7 from the best local professors. Content analysis was performed by MAXQDA software. The codes, categories and themes were explored through an inductive process that began from semantic units or direct quotations to general themes. Results: According to the results of this study, the best teaching approach is the mixed method (student-centered together with teacher-centered plus educational planning and previous readiness. But whenever the teachers can teach using this method confront with some barriers and requirements; some of these requirements are prerequisite in professors’ behavior and some of these are prerequisite in professors’ outlook. Also, there are some major barriers, some of which are associated with the professors’ operation and others are related to laws and regulations. Implications of these findings for teachers’ preparation in education are discussed. Conclusion: In the present study, it was illustrated that a good teaching method helps the students to question their preconceptions, and motivates them to learn, by putting them in a situation in which they come to see themselves as the authors of answers, as the agents of responsibility for change. But training through this method has some barriers and requirements. To have an effective teaching; the faculty members of the universities

Methods to Increase Educational Effectiveness in an Adult Correctional Setting.

Science.gov (United States)

Kuster, Byron

1998-01-01

A correctional educator reflects on methods that improve instructional effectiveness. These include teacher-student collaboration, clear goals, student accountability, positive classroom atmosphere, high expectations, and mutual respect. (SK)

Effect of cooking methods on the micronutrient profile of selected ...

African Journals Online (AJOL)

Effect of cooking methods on the micronutrient profile of selected vegetables: okra fruit ( Abelmoshcus esculentus ), fluted pumpkin ( Telfairia occidentalis ), African spinach ( Amarantus viridis ), and scent leaf ( Ocumum gratissimum.

Effects analysis of three kinds of operation methods in treatment of dacryocystitis

Directory of Open Access Journals (Sweden)

Wei Cui

2013-01-01

Full Text Available AIM: To investigate the effects on patients with chronic dacryocystitis treated with three methods: external dacryocystorhinostomy(EDCR, intranasal endoscopic dacryocystorhinostomy(IEDCRand Nd:YAG laser dacryoplasty, and to explore the best operation method. METHODS:Totally 182 cases(202 eyeswere randomly divided into three groups, using EDCR, IEDCR and Nd:YAG laser dacryoplasty respectively, postoperative follow- up lasted 6-24months.RESULTS: The success rate of three groups were 93.9%, 92.3% and 71.1% respectively. There was not significant difference between group EDCR and group IEDCR(P>0.05. There was significant difference between group Nd:YAG laser dacryoplasty and other two groups(PCONCLUSION: EDCR and IEDCR are effective methods. Especially IEDCR is minimal invasive technique and worthy of promotion and application.

On the effectiveness in implementing a waste-management-plan method in construction

International Nuclear Information System (INIS)

Tam, Vivian W.Y.

2008-01-01

The increasing awareness of waste management concerns from construction and demolition waste has led to the development of waste management as an important function of construction project management. The Hong Kong government started employing the implementation of a waste-management-plan (WMP) method for all construction projects in 2003. During the trial period, the government received different version of feedback from the industry. It also came out that detailed descriptions of waste management procedures in the WMP method largely affect the productivity of companies. This paper investigates the effectiveness of the existing implementation of the WMP method in the Hong Kong construction industry. A questionnaire survey and structured interviews were conducted. The result showed that 'Propose methods for on-site reuse of materials' and 'Propose methods for reducing waste' are the main benefits gained from the implementation of the WMP method. However, 'Low financial incentive' and 'Increase in overhead cost' are considered as the major difficulties in the implementation. From that, 'Use of prefabricated building components' is considered as the major effective measure to encourage the implementation of the WMP method

Effects of cooking methods on electrophoretic patterns of rainbow trout

Directory of Open Access Journals (Sweden)

Yasemen Yanar

2011-07-01

Full Text Available The aim of this study was to determine the effects of different cooking methods on the electrophoretic patterns of rainbow trout (Oncorhynchus mykiss fillets using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE. Raw rainbow trout were deep-fried, microwaved, grilled, and baked and then monitored for changes in the electrophoretic pattern. All cooking methods resulted in significant moisture loss when compared to the raw sample (P

Examining Method Effect of Synonym and Antonym Test in Verbal Abilities Measure

Directory of Open Access Journals (Sweden)

Wahyu Widhiarso

2015-08-01

Full Text Available Many researchers have assumed that different methods could be substituted to measure the same attributes in assessment. Various models have been developed to accommodate the amount of variance attributable to the methods but these models application in empirical research is rare. The present study applied one of those models to examine whether method effects were presents in synonym and antonym tests. Study participants were 3,469 applicants to graduate school. The instrument used was the Graduate Academic Potential Test (PAPS, which includes synonym and antonym questions to measure verbal abilities. Our analysis showed that measurement models that using correlated trait–correlated methods minus one, CT-C(M–1, that separated trait and method effect into distinct latent constructs yielded slightly better values for multiple goodness-of-fit indices than one factor model. However, either for the synonym or antonym items, the proportion of variance accounted for by the method is smaller than trait variance. The correlation between factor scores of both methods is high (r = 0.994. These findings confirm that synonym and antonym tests represent the same attribute so that both tests cannot be treated as two unique methods for measuring verbal ability.

Examining Method Effect of Synonym and Antonym Test in Verbal Abilities Measure.

Science.gov (United States)

Widhiarso, Wahyu; Haryanta

2015-08-01

Many researchers have assumed that different methods could be substituted to measure the same attributes in assessment. Various models have been developed to accommodate the amount of variance attributable to the methods but these models application in empirical research is rare. The present study applied one of those models to examine whether method effects were presents in synonym and antonym tests. Study participants were 3,469 applicants to graduate school. The instrument used was the Graduate Academic Potential Test (PAPS), which includes synonym and antonym questions to measure verbal abilities. Our analysis showed that measurement models that using correlated trait-correlated methods minus one, CT-C(M-1), that separated trait and method effect into distinct latent constructs yielded slightly better values for multiple goodness-of-fit indices than one factor model. However, either for the synonym or antonym items, the proportion of variance accounted for by the method is smaller than trait variance. The correlation between factor scores of both methods is high (r = 0.994). These findings confirm that synonym and antonym tests represent the same attribute so that both tests cannot be treated as two unique methods for measuring verbal ability.

Correlates of the Rosenberg Self-Esteem Scale Method Effects

Science.gov (United States)

Quilty, Lena C.; Oakman, Jonathan M.; Risko, Evan

2006-01-01

Investigators of personality assessment are becoming aware that using positively and negatively worded items in questionnaires to prevent acquiescence may negatively impact construct validity. The Rosenberg Self-Esteem Scale (RSES) has demonstrated a bifactorial structure typically proposed to result from these method effects. Recent work suggests…

Further Investigating Method Effects Associated with Negatively Worded Items on Self-Report Surveys

Science.gov (United States)

DiStefano, Christine; Motl, Robert W.

2006-01-01

This article used multitrait-multimethod methodology and covariance modeling for an investigation of the presence and correlates of method effects associated with negatively worded items on the Rosenberg Self-Esteem (RSE) scale (Rosenberg, 1989) using a sample of 757 adults. Results showed that method effects associated with negative item phrasing…

A method of self-pursued boundary value on a body and the Magnus effect calculated with this method

Science.gov (United States)

Yoshino, Fumio; Hayashi, Tatsuo; Waka, Ryoji

1991-03-01

A computational method, designated 'SPB', is proposed for the automatic determination of the stream function Phi on an arbitrarily profiled body without recourse to empirical factors. The method is applied to the case of a rotating, circular cross-section cylinder in a uniform shear flow, and the results obtained are compared with those of both the method in which the value of Phi is fixed on a body and the conventional empirical method; it is in view of this established that the SPB method is very efficient and applicable to both steady and unsteady flows. The SPB method, in addition to yielding the aerodynamic forces acting on a cylinder, shows that the Magnus effect lift force decreases as the velocity gradient of the shear flow increases while the cylinder's rotational speed is kept constant.

Size effect in barium titanate powders synthesized by different hydrothermal methods

International Nuclear Information System (INIS)

Sun Weian

2006-01-01

The size effect in barium titanate (BaTiO 3 ) was investigated both experimentally and theoretically. Tetragonal BaTiO 3 powders with average sizes from 80 to 420 nm were directly prepared by different hydrothermal methods. The tetragonality of the hydrothermal BaTiO 3 decreased with decreasing particle size, which exhibited a dependence on the synthesis method. A phenomenological model for the size effect was proposed to interpret the experimental observations. The influence of the defects, mainly the lattice hydroxyl, on the size effect was investigated to understand the correlation between the size effect and synthesis condition. The permittivities of BaTiO 3 powder at different particle sizes were calculated, which predicted a maximum permittivity of over 16 000 around the room-temperature critical size of ∼70 nm. The prediction was in good accordance with the experimental data reported recently

Effects of Jigsaw Learning Method on Students’ Self-Efficacy and Motivation to Learn

OpenAIRE

Dwi Nur Rachmah

2017-01-01

Jigsaw learning as a cooperative learning method, according to the results of some studies, can improve academic skills, social competence, behavior in learning, and motivation to learn. However, in some other studies, there are different findings regarding the effect of jigsaw learning method on self-efficacy. The purpose of this study is to examine the effects of jigsaw learning method on self-efficacy and motivation to learn in psychology students at the Faculty of Medicine, Universitas La...

Estimation of effective brain connectivity with dual Kalman filter and EEG source localization methods.

Science.gov (United States)

Rajabioun, Mehdi; Nasrabadi, Ali Motie; Shamsollahi, Mohammad Bagher

2017-09-01

Effective connectivity is one of the most important considerations in brain functional mapping via EEG. It demonstrates the effects of a particular active brain region on others. In this paper, a new method is proposed which is based on dual Kalman filter. In this method, firstly by using a brain active localization method (standardized low resolution brain electromagnetic tomography) and applying it to EEG signal, active regions are extracted, and appropriate time model (multivariate autoregressive model) is fitted to extracted brain active sources for evaluating the activity and time dependence between sources. Then, dual Kalman filter is used to estimate model parameters or effective connectivity between active regions. The advantage of this method is the estimation of different brain parts activity simultaneously with the calculation of effective connectivity between active regions. By combining dual Kalman filter with brain source localization methods, in addition to the connectivity estimation between parts, source activity is updated during the time. The proposed method performance has been evaluated firstly by applying it to simulated EEG signals with interacting connectivity simulation between active parts. Noisy simulated signals with different signal to noise ratios are used for evaluating method sensitivity to noise and comparing proposed method performance with other methods. Then the method is applied to real signals and the estimation error during a sweeping window is calculated. By comparing proposed method results in different simulation (simulated and real signals), proposed method gives acceptable results with least mean square error in noisy or real conditions.

The effects of three different grinding methods in DNA extraction of ...

African Journals Online (AJOL)

uwerhiavwe

2013-04-17

Apr 17, 2013 ... The effects of three different grinding methods in DNA extraction of cowpea .... 100 mg of the leaf tissues were weighed in an electronic balance. CTAB method .... The primers were synthesized by Life Technologies (AB & Invitrogen). .... This work was supported by 'Shuang-Zhi Plan' of Sichuan. Agricultural ...

Effect of Planting Methods on Maturity and Yield of Onion (Allium ...

African Journals Online (AJOL)

Key words: onion, planting method, sets, transplantings, direct seeding, bulb yield. .... The central four rows of each plot were harvested and ... Means with lower case letters represent values for planting methods effects and means with upper .... Acta Hort. 84: 27-32. Brewster, J.L. 2002. Onions and other vegetable Alliums.

Coronal Polarization of Pseudostreamers and the Solar Polar Field Reversal

Science.gov (United States)

Rachmeler, L. A.; Guennou, C.; Seaton, D. B.; Gibson, S. E.; Auchere, F.

2016-01-01

The reversal of the solar polar magnetic field is notoriously hard to pin down due to the extreme viewing angle of the pole. In Cycle 24, the southern polar field reversal can be pinpointed with high accuracy due to a large-scale pseudostreamer that formed over the pole and persisted for approximately a year. We tracked the size and shape of this structure with multiple observations and analysis techniques including PROBA2/SWAP EUV images, AIA EUV images, CoMP polarization data, and 3D tomographic reconstructions. We find that the heliospheric field reversed polarity in February 2014, whereas in the photosphere, the last vestiges of the previous polar field polarity remained until March 2015. We present here the evolution of the structure and describe its identification in the Fe XII 1074nm coronal emission line, sensitive to the Hanle effect in the corona.

Effects of different premature chromosome condensation method on dose-curve of 60Co γ-ray

International Nuclear Information System (INIS)

Guo Yicao; Yang Haoxian; Yang Yuhua; Li Xi'na; Huang Weixu; Zheng Qiaoling

2012-01-01

Objective: To study the effect of traditional method and improved method of the premature chromosome condensation (PCC) on the dose-effect curve of 60 Co γ ray, for choosing the rapid and accurate biological dose estimating method for the accident emergency. Methods: Collected 3 healthy male cubits venous blood (23 to 28 years old), and irradiated by 0, 1.0, 5.0, 10.0, 15.0, 20.0 Gy 60 Co γ ray (absorbed dose rate: 0.635 Gy/min). Observed the relation of dose-effect curve in the 2 incubation time (50 hours and 60 hours) of the traditional method and improved method. Used the dose-effect curve to verify the exposure of 10.0 Gy (absorbed dose rate: 0.670 Gy/min). Results: (1) In the traditional method of 50-hour culture, the PCC cell count in 15.0 Gy and 20.0 Gy was of no statistical significance. But there were statistical significance in the traditional method of 60-hours culture and improved method (50-hour culture and 60-hour culture). Used the last 3 culture methods to make dose curve. (2) In the above 3 culture methods, the related coefficient between PCC ring and exposure dose was quite close (all of more than 0.996, P 0.05), the morphology of regression straight lines almost overlap. (3) Used the above 3 dose-effect curves to estimate the irradiation results (10.0 Gy), the error was less than or equal to 8%, all of them were within the allowable range of the biological experiment (15%). Conclusion: The 3 dose-effect curves of the above 3 culture methods can apply to biological dose estimating of large doses of ionizing radiation damage. Especially the improved method of 50-hour culture,it is much faster to estimate and it should be regarded as the first choice in accident emergency. (authors)

An efficient dose-compensation method for proximity effect correction

International Nuclear Information System (INIS)

Wang Ying; Han Weihua; Yang Xiang; Zhang Yang; Yang Fuhua; Zhang Renping

2010-01-01

A novel simple dose-compensation method is developed for proximity effect correction in electron-beam lithography. The sizes of exposed patterns depend on dose factors while other exposure parameters (including accelerate voltage, resist thickness, exposing step size, substrate material, and so on) remain constant. This method is based on two reasonable assumptions in the evaluation of the compensated dose factor: one is that the relation between dose factors and circle-diameters is linear in the range under consideration; the other is that the compensated dose factor is only affected by the nearest neighbors for simplicity. Four-layer-hexagon photonic crystal structures were fabricated as test patterns to demonstrate this method. Compared to the uncorrected structures, the homogeneity of the corrected hole-size in photonic crystal structures was clearly improved. (semiconductor technology)

The effects of three methods of synchronization on estrus induction ...

African Journals Online (AJOL)

The effects of three methods of synchronization on estrus induction and ... Due to the importances of estrus synchronization in sheep reproduction and fertility, the ... sponges (medroxyprogesterone) and controlled intravaginal drug-releasing ...

EVALUATION METHOD FOR PARASITIC EFFECTS OF THE ELECTRO-OPTICAL MODULATOR IN A FIBER OPTIC GYROSCOPE

Directory of Open Access Journals (Sweden)

S. A. Volkovskiy

2016-09-01

Full Text Available Subject of Research.The paper proposes an original method for studying the parasitic effects in the electro-optic modulator of the fiber optic gyroscope. Proposed method is based on the usage of a special waveform phase modulation signal. Method. The essence of the proposed method lies in modification of serrodyne modulation signal, thereby providing a periodic displacement of the phase difference signal to the maximum of the interference curve. In this case, the intensity level reflects the influence of parasitic effects with the degree of manifestation being determined by the sequence of voltage control signals applied to the modulator. Enumeration of combinations of control signals and the corresponding intensity levels gives the possibility to observe an empirical dependence of the parasitic effects and use it later for compensation. Main Results. The efficiency of the proposed method is demonstrated by the program model of the fiber optic gyroscope. The results of the method application on a production sample of the device were obtained. Comparison with the results of direct estimate of the parasitic intensity modulation effect testifies to the effectiveness of the proposed method. Practical Relevance. The method can be used as a diagnostic tool to quantify the influence of parasitic effects in the electro-optic modulator of the fiber optic gyroscope as well as for their subsequent compensation.

An Effective News Recommendation Method for Microblog User

Directory of Open Access Journals (Sweden)

Wanrong Gu

2014-01-01

Full Text Available Recommending news stories to users, based on their preferences, has long been a favourite domain for recommender systems research. Traditional systems strive to satisfy their user by tracing users' reading history and choosing the proper candidate news articles to recommend. However, most of news websites hardly require any user to register before reading news. Besides, the latent relations between news and microblog, the popularity of particular news, and the news organization are not addressed or solved efficiently in previous approaches. In order to solve these issues, we propose an effective personalized news recommendation method based on microblog user profile building and sub class popularity prediction, in which we propose a news organization method using hybrid classification and clustering, implement a sub class popularity prediction method, and construct user profile according to our actual situation. We had designed several experiments compared to the state-of-the-art approaches on a real world dataset, and the experimental results demonstrate that our system significantly improves the accuracy and diversity in mass text data.

An effective news recommendation method for microblog user.

Science.gov (United States)

Gu, Wanrong; Dong, Shoubin; Zeng, Zhizhao; He, Jinchao

2014-01-01

Recommending news stories to users, based on their preferences, has long been a favourite domain for recommender systems research. Traditional systems strive to satisfy their user by tracing users' reading history and choosing the proper candidate news articles to recommend. However, most of news websites hardly require any user to register before reading news. Besides, the latent relations between news and microblog, the popularity of particular news, and the news organization are not addressed or solved efficiently in previous approaches. In order to solve these issues, we propose an effective personalized news recommendation method based on microblog user profile building and sub class popularity prediction, in which we propose a news organization method using hybrid classification and clustering, implement a sub class popularity prediction method, and construct user profile according to our actual situation. We had designed several experiments compared to the state-of-the-art approaches on a real world dataset, and the experimental results demonstrate that our system significantly improves the accuracy and diversity in mass text data.

An Effective News Recommendation Method for Microblog User

Science.gov (United States)

Gu, Wanrong; Dong, Shoubin; Zeng, Zhizhao; He, Jinchao

2014-01-01

Recommending news stories to users, based on their preferences, has long been a favourite domain for recommender systems research. Traditional systems strive to satisfy their user by tracing users' reading history and choosing the proper candidate news articles to recommend. However, most of news websites hardly require any user to register before reading news. Besides, the latent relations between news and microblog, the popularity of particular news, and the news organization are not addressed or solved efficiently in previous approaches. In order to solve these issues, we propose an effective personalized news recommendation method based on microblog user profile building and sub class popularity prediction, in which we propose a news organization method using hybrid classification and clustering, implement a sub class popularity prediction method, and construct user profile according to our actual situation. We had designed several experiments compared to the state-of-the-art approaches on a real world dataset, and the experimental results demonstrate that our system significantly improves the accuracy and diversity in mass text data. PMID:24983011

Effect of drying methods on the rheological characteristics and ...

African Journals Online (AJOL)

The effect of drying methods (sun and oven-drying) on the rheological properties and colour of amala, a thick paste from yam flour, was investigated using two varieties of yam (Dioscorea rotundata and. Dioscorea alata). The yam flour produced was later reconstituted to produce amala of different pasting characteristics, ...

Study on critical effect in lattice homogenization via Monte Carlo method

International Nuclear Information System (INIS)

Li Mancang; Wang Kan; Yao Dong

2012-01-01

In contrast to the traditional deterministic lattice codes, generating the homogenization multigroup constants via Monte Carlo method overcomes the difficulties in geometry and treats energy in continuum. thus provides more accuracy parameters. An infinite lattice of identical symmetric motives is usually assumed when performing the homogenization. However, the finite size of a reactor is reality and it should influence the lattice calculation. In practice of the homogenization with Monte Carlo method, B N theory is applied to take the leakage effect into account. The fundamental mode with the buckling B is used as a measure of the finite size. The critical spectrum in the solution of 0-dimensional fine-group B 1 equations is used to correct the weighted spectrum for homogenization. A PWR prototype core is examined to verify that the presented method indeed generates few group constants effectively. In addition, a zero power physical experiment verification is performed. The results show that B N theory is adequate for leakage correction in the multigroup constants generation via Monte Carlo method. (authors)

Acute effect of different stretching methods on isometric muscle strength

Directory of Open Access Journals (Sweden)

Gabriel Vasconcellos de Lima Costa e Silva

2014-03-01

This study investigated the acute effect of static stretching methods (SS and proprioceptive neuromuscular facilitation (PNF on the static muscle strength (SMS. Eleven young male subjects with strength training experience, performed 3 tests with a 48h interval between them, randomly selected, where each one subject carried out all procedures: a hand grip without stretching; b hand grip preceded by static stretching of wrist flexors muscles; c hand grip preceded by PNF stretching of wrist flexors muscles. The Shapiro-Wilk test verified the normality of data, and a one-way ANOVA with repeated measures, followed by Tukey’s post hoc test, evaluated the differences between the groups. The significance was set at p 0.05. In conclusion, both stretching methods had caused negative effects on isometric strength, reducing its levels.

Evaluating the effectiveness of Behavior-Based Safety education methods for commercial vehicle drivers.

Science.gov (United States)

Wang, Xuesong; Xing, Yilun; Luo, Lian; Yu, Rongjie

2018-08-01

Risky driving behavior is one of the main causes of commercial vehicle related crashes. In order to achieve safer vehicle operation, safety education for drivers is often provided. However, the education programs vary in quality and may not always be successful in reducing crash rates. Behavior-Based Safety (BBS) education is a popular approach found effective by numerous studies, but even this approach varies as to the combination of frequency, mode and content used by different education providers. This study therefore evaluates and compares the effectiveness of BBS education methods. Thirty-five drivers in Shanghai, China, were coached with one of three different BBS education methods for 13 weeks following a 13-week baseline phase with no education. A random-effects negative binomial (NB) model was built and calibrated to investigate the relationship between BBS education and the driver at-fault safety-related event rate. Based on the results of the random-effects NB model, event modification factors (EMF) were calculated to evaluate and compare the effectiveness of the methods. Results show that (1) BBS education was confirmed to be effective in safety-related event reduction; (2) the most effective method among the three applied monthly face-to-face coaching, including feedback with video and statistical data, and training on strategies to avoid driver-specific unsafe behaviors; (3) weekly telephone coaching using statistics and strategies was rated by drivers as the most convenient delivery mode, and was also significantly effective. Copyright © 2018 Elsevier Ltd. All rights reserved.

Calibration method for a carbon nanotube field-effect transistor biosensor

International Nuclear Information System (INIS)

Abe, Masuhiro; Murata, Katsuyuki; Ataka, Tatsuaki; Matsumoto, Kazuhiko

2008-01-01

An easy calibration method based on the Langmuir adsorption theory is proposed for a carbon nanotube field-effect transistor (NTFET) biosensor. This method was applied to three NTFET biosensors that had approximately the same structure but exhibited different characteristics. After calibration, their experimentally determined characteristics exhibited a good agreement with the calibration curve. The reason why the observed characteristics of these NTFET biosensors differed among the devices was that the carbon nanotube (CNT) that formed the channel was not uniform. Although the controlled growth of a CNT is difficult, it is shown that an NTFET biosensor can be easy calibrated using the proposed calibration method, regardless of the CNT channel structures

Heavy Metal Polluted Soils: Effect on Plants and Bioremediation Methods

OpenAIRE

Chibuike, G. U.; Obiora, S. C.

2014-01-01

Soils polluted with heavy metals have become common across the globe due to increase in geologic and anthropogenic activities. Plants growing on these soils show a reduction in growth, performance, and yield. Bioremediation is an effective method of treating heavy metal polluted soils. It is a widely accepted method that is mostly carried out in situ; hence it is suitable for the establishment/reestablishment of crops on treated soils. Microorganisms and plants employ different mechanisms for...

Effects of different traditional cooking methods on nutrients and ...

African Journals Online (AJOL)

The objective of this research was to determine the effect of cooking using two different methods of preparing okra soup in Ondo state on nutrient, mineral content including zinc bioavailability of okra, Abelmoschus esculentus. The okra fruits were grated and divided into four lots; two lots were cooked with other ingredients of ...

Comparison of mobility extraction methods based on field-effect measurements for graphene

Directory of Open Access Journals (Sweden)

Hua Zhong

2015-05-01

Full Text Available Carrier mobility extraction methods for graphene based on field-effect measurements are explored and compared according to theoretical analysis and experimental results. A group of graphene devices with different channel lengths were fabricated and measured, and carrier mobility is extracted from those electrical transfer curves using three different methods. Accuracy and applicability of those methods were compared. Transfer length method (TLM can obtain accurate density dependent mobility and contact resistance at relative high carrier density based on data from a group of devices, and then can act as a standard method to verify other methods. As two of the most popular methods, direct transconductance method (DTM and fitting method (FTM can extract mobility easily based on transfer curve of a sole graphene device. DTM offers an underestimated mobility at any carrier density owing to the neglect of contact resistances, and the accuracy can be improved through fabricating field-effect transistors with long channel and good contacts. FTM assumes a constant mobility independent on carrier density, and then can obtain mobility, contact resistance and residual density stimulations through fitting a transfer curve. However, FTM tends to obtain a mobility value near Dirac point and then overestimates carrier mobility of graphene. Comparing with the DTM and FTM, TLM could offer a much more accurate and carrier density dependent mobility, that reflects the complete properties of graphene carrier mobility.

A Quantitative Analytical Method to Test for Salt Effects on Giant Unilamellar Vesicles

DEFF Research Database (Denmark)

Hadorn, Maik; Bönzli, Eva; Eggenberger Hotz, Peter

2011-01-01

preparation method with automatic haemocytometry. We found that this new quantitative screening method is highly reliable and consistent with previously reported results. Thus, this method may provide a significant methodological advance in analysis of effects on free-standing model membranes....

Methods to assess intended effects of drug treatment in observational studies are reviewed

NARCIS (Netherlands)

Klungel, Olaf H|info:eu-repo/dai/nl/181447649; Martens, Edwin P|info:eu-repo/dai/nl/088859010; Psaty, Bruce M; Grobbee, Diederik E; Sullivan, Sean D; Stricker, Bruno H Ch; Leufkens, Hubert G M|info:eu-repo/dai/nl/075255049; de Boer, A|info:eu-repo/dai/nl/075097346

2004-01-01

BACKGROUND AND OBJECTIVE: To review methods that seek to adjust for confounding in observational studies when assessing intended drug effects. METHODS: We reviewed the statistical, economical and medical literature on the development, comparison and use of methods adjusting for confounding. RESULTS:

The integrated circuit IC EMP transient state disturbance effect experiment method investigates

International Nuclear Information System (INIS)

Li Xiaowei

2004-01-01

Transient state disturbance characteristic study on the integrated circuit, IC, need from its coupling path outset. Through cable (aerial) coupling, EMP converts to an pulse current voltage and results in the impact to the integrated circuit I/O orifice passing the cable. Aiming at the armament system construction feature, EMP effect to the integrated circuit, IC inside the system is analyzed. The integrated circuit, IC EMP effect experiment current injection method is investigated and a few experiments method is given. (authors)

A method for calculating effective lifetime risk of radiation-induced cancer from screening mammography

International Nuclear Information System (INIS)

Ali, R.M.; England, A.; McEntee, M.F.; Hogg, P.

2015-01-01

Purpose: To propose a method for evaluating the effective lifetime risk of radiation-induced cancer from screening mammography and to present initial data for the UK National Breast Screening Programme. Material and methods: The imaging was undertaken using a Hologic Selenia full field digital mammographic unit. The proposed method utilises an ATOM phantom containing thermoluminescent dosimeters and a perspex-polyethylene breast phantom to measure organ doses during a standard four view screening mammogram. Effective dose was calculated and effective risk was modelled for a range of client ages. The total lifetime effective risk was then calculated for the UK national screening programme. Calculation of effective risk includes the radiation dose to examined and contralateral breasts in addition to other body organs; this is an advantage over the mean glandular dose. Results: The contralateral breast, thyroid, thymus, brain, lung, salivary glands, and bone marrow all receive more than 1 μGy radiation dose during screening mammography. A major difference exists for total effective lifetime risk of radiation-induced cancer between clients with average and high breast cancer risk. Differences are attributed to the commencement age of screening and time interval between screens. Conclusion: This study proposes a method to evaluate effective lifetime risk of radiation-induced cancer from screening mammography in order to compare different mammography screening programmes. - Highlights: • We proposed a method for the calculation of radiation-induced cancer from screening mammography. • We measured the radiation absorbed dose of different organs during screening mammography. • There are major differences between mammography screening programme categories with regard to radiation effective risk.

Evaluating the Effectiveness of Various Methods of Iron Deficiency Prevention in Infants

Directory of Open Access Journals (Sweden)

N.А. Bielykh

2015-02-01

Full Text Available Objective: to evaluate the effectiveness of various methods of iron deficiency prevention in infants. Materials and Methods. Within 30-cluster regional epidemiological study on the prevalence of iodine and iron deficiency in children, we have analyzed the results of screening for anemia in 948 children, carried out questioning of mothers, determined the concentration of iron in breast milk. The effectiveness of preventive measures was assessed by indicators of iron supplementation of the body in 96 children depending on the existing method of iron prophylaxis. Results of the Study. It was found that the use by mother during lactation of iron-containing vitamin-mineral complexes had no effect on the iron content in breast milk. It is proved that administration of iron (III hydroxide polymaltose complex 1 mg/kg/day for 2 months is the most effective way to prevent iron deficiency in children who are exclusively breastfed.

Advanced methods in evaluation of thermal power systems effectiveness

International Nuclear Information System (INIS)

Barnak, N.; Jakubcek, P.; Zadrazil, J.

1993-01-01

The universal method for thermodynamic systems process irreversibility evaluation based on exergetic approach is elaborated in this article. The method uses the basic property of exergy as extensive state parameter -additivity. Division of the system onto some hierarchic levels is considered and relation between exergetic system characteristics and its parts is defined. There are system structure coefficients in common form expressed article they are analysed. The criteria for technical and economical optimization of the system using expressed structure coefficients are defined. In the article, there are common approaches defined for the method application in the area of nuclear power plant secondary circuits and the method is used for nuclear power plant WWER-1000 secondary circuit analysis. For this, individual exergetic characteristics of secondary circuit and its parts are expressed and some of secondary circuit parameters are optimized. Proposals for practical realisation of the results are stated in the conclusions of the article, mainly in the area of computerized evaluation of technical and economical parameters of nuclear power plant and effectiveness of its operation

Buffer-gas-induced absorption resonances in Rb vapor

International Nuclear Information System (INIS)

Mikhailov, Eugeniy E.; Novikova, Irina; Rostovtsev, Yuri V.; Welch, George R.

2004-01-01

We observe transformation of the electromagnetically induced transparency (EIT) resonance into an absorption resonance in a Λ interaction configuration in a cell filled with 87 Rb and a buffer gas. This transformation occurs as one-photon detuning of the coupling fields is varied from the atomic transition. No such absorption resonance is found in the absence of a buffer gas. The width of the absorption resonance is several times smaller than the width of the EIT resonance, and the changes of absorption near these resonances are about the same. Similar absorption resonances are detected in the Hanle configuration in a buffered cell

Design methods of Coanda effect nozzle with two streams

Directory of Open Access Journals (Sweden)

Michele TRANCOSSI

2014-03-01

Full Text Available This paper continues recent research of the authors about the ACHEON Coanda effect two streams nozzle. This nozzle aims to produce an effective deflection of a propulsive jet with a correspondent deviation of the thrust vector in a 2D plane. On the basis of a previously published mathematical model, based on integral equations, it tries to produce an effective design guideline, which can be adopted for design activities of the nozzle for aeronautic propulsion. The presented model allows defining a governing method for this innovative two stream synthetic jet nozzle. The uncertainness level of the model are discussed and novel aircraft architectures based on it are presented. A CFD validation campaign is produced focusing on validating the model and the designs produced.

Simulation methods of nuclear electromagnetic pulse effects in integrated circuits

International Nuclear Information System (INIS)

Cheng Jili; Liu Yuan; En Yunfei; Fang Wenxiao; Wei Aixiang; Yang Yuanzhen

2013-01-01

In the paper the ways to compute the response of transmission line (TL) illuminated by electromagnetic pulse (EMP) were introduced firstly, which include finite-difference time-domain (FDTD) and trans-mission line matrix (TLM); then the feasibility of electromagnetic topology (EMT) in ICs nuclear electromagnetic pulse (NEMP) effect simulation was discussed; in the end, combined with the methods computing the response of TL, a new method of simulate the transmission line in IC illuminated by NEMP was put forward. (authors)

A method to calculate the effect of heterogeneous composition on bundle power

Energy Technology Data Exchange (ETDEWEB)

Choi, Hang Bok [Korea Atomic Energy Research Institute, Taejon (Korea)

1998-09-01

In the DUPIC fuel cycle, the spent pressurized water reactor (PWR) fuel is used in a Canada deuterium uranium (CANDU) reactor. Depending on the initial condition and burnup history of PWR fuel, the DUPIC fuel composition varies accordingly. In order to see the effect of the fuel composition, a simple and fast method was developed and applied to the DUPIC fuel. This report discusses the method developed to predict the effect of heterogeneous fuel composition on the bundle power. (author). 3 refs., 5 tabs.

Effective Teaching Methods in Higher Education: Requirements and Barriers.

Science.gov (United States)

Shirani Bidabadi, Nahid; Nasr Isfahani, Ahmmadreza; Rouhollahi, Amir; Khalili, Roya

2016-10-01

Teaching is one of the main components in educational planning which is a key factor in conducting educational plans. Despite the importance of good teaching, the outcomes are far from ideal. The present qualitative study aimed to investigate effective teaching in higher education in Iran based on the experiences of best professors in the country and the best local professors of Isfahan University of Technology. This qualitative content analysis study was conducted through purposeful sampling. Semi-structured interviews were conducted with ten faculty members (3 of them from the best professors in the country and 7 from the best local professors). Content analysis was performed by MAXQDA software. The codes, categories and themes were explored through an inductive process that began from semantic units or direct quotations to general themes. According to the results of this study, the best teaching approach is the mixed method (student-centered together with teacher-centered) plus educational planning and previous readiness. But whenever the teachers can teach using this method confront with some barriers and requirements; some of these requirements are prerequisite in professors' behavior and some of these are prerequisite in professors' outlook. Also, there are some major barriers, some of which are associated with the professors' operation and others are related to laws and regulations. Implications of these findings for teachers' preparation in education are discussed. In the present study, it was illustrated that a good teaching method helps the students to question their preconceptions, and motivates them to learn, by putting them in a situation in which they come to see themselves as the authors of answers, as the agents of responsibility for change. But training through this method has some barriers and requirements. To have an effective teaching; the faculty members of the universities should be awarded of these barriers and requirements as a way to

Uncertainty in decision models analyzing cost-effectiveness : The joint distribution of incremental costs and effectiveness evaluated with a nonparametric bootstrap method

NARCIS (Netherlands)

Hunink, Maria; Bult, J.R.; De Vries, J; Weinstein, MC

1998-01-01

Purpose. To illustrate the use of a nonparametric bootstrap method in the evaluation of uncertainty in decision models analyzing cost-effectiveness. Methods. The authors reevaluated a previously published cost-effectiveness analysis that used a Markov model comparing initial percutaneous

Impact of parasitic thermal effects on thermoelectric property measurements by Harman method

International Nuclear Information System (INIS)

Kwon, Beomjin; Baek, Seung-Hyub; Keun Kim, Seong; Kim, Jin-Sang

2014-01-01

Harman method is a rapid and simple technique to measure thermoelectric properties. However, its validity has been often questioned due to the over-simplified assumptions that this method relies on. Here, we quantitatively investigate the influence of the previously ignored parasitic thermal effects on the Harman method and develop a method to determine an intrinsic ZT. We expand the original Harman relation with three extra terms: heat losses via both the lead wires and radiation, and Joule heating within the sample. Based on the expanded Harman relation, we use differential measurement of the sample geometry to measure the intrinsic ZT. To separately evaluate the parasitic terms, the measured ZTs with systematically varied sample geometries and the lead wire types are fitted to the expanded relation. A huge discrepancy (∼28%) of the measured ZTs depending on the measurement configuration is observed. We are able to separately evaluate those parasitic terms. This work will help to evaluate the intrinsic thermoelectric property with Harman method by eliminating ambiguities coming from extrinsic effects

Art of reading a journal article: Methodically and effectively

Science.gov (United States)

Subramanyam, RV

2013-01-01

Background: Reading scientific literature is mandatory for researchers and clinicians. With an overflow of medical and dental journals, it is essential to develop a method to choose and read the right articles. Objective: To outline a logical and orderly approach to reading a scientific manuscript. By breaking down the task into smaller, step-by-step components, one should be able to attain the skills to read a scientific article with ease. Methods: The reader should begin by reading the title, abstract and conclusions first. If a decision is made to read the entire article, the key elements of the article can be perused in a systematic manner effectively and efficiently. A cogent and organized method is presented to read articles published in scientific journals. Conclusion: One can read and appreciate a scientific manuscript if a systematic approach is followed in a simple and logical manner. PMID:23798833

Effectiveness of various innovative learning methods in health science classrooms: a meta-analysis.

Science.gov (United States)

Kalaian, Sema A; Kasim, Rafa M

2017-12-01

This study reports the results of a meta-analysis of the available literature on the effectiveness of various forms of innovative small-group learning methods on student achievement in undergraduate college health science classrooms. The results of the analysis revealed that most of the primary studies supported the effectiveness of the small-group learning methods in improving students' academic achievement with an overall weighted average effect-size of 0.59 in standard deviation units favoring small-group learning methods. The subgroup analysis showed that the various forms of innovative and reform-based small-group learning interventions appeared to be significantly more effective for students in higher levels of college classes (sophomore, junior, and senior levels), students in other countries (non-U.S.) worldwide, students in groups of four or less, and students who choose their own group. The random-effects meta-regression results revealed that the effect sizes were influenced significantly by the instructional duration of the primary studies. This means that studies with longer hours of instruction yielded higher effect sizes and on average every 1 h increase in instruction, the predicted increase in effect size was 0.009 standard deviation units, which is considered as a small effect. These results may help health science and nursing educators by providing guidance in identifying the conditions under which various forms of innovative small-group learning pedagogies are collectively more effective than the traditional lecture-based teaching instruction.

Wave propagation method as an accurate technique for effective refractive index retrieving

DEFF Research Database (Denmark)

Andryieuski, Andrei; Malureanu, Radu; Lavrinenko, Andrei

2009-01-01

An effective parameters retrieval method based on the wave propagation simulation is proposed and compared with the standard S-parameter procedure. The method is free from possible mistakes originated by the multiple branching of solutions in the S-parameter procedure and shows high accuracy. The...

Mind-to-paper is an effective method for scientific writing

DEFF Research Database (Denmark)

Rosenberg, Jacob; Burcharth, Jakob; Pommergaard, Hans Christian

2013-01-01

The problem of initiating the writing process is a well-known phenomenon, especially for young and inexperienced scientists. The purpose of this paper is to present an effective method to overcome this problem and increase writing efficiency among inexperienced scientists....

Evaluation of the site effect with Heuristic Methods

Science.gov (United States)

Torres, N. N.; Ortiz-Aleman, C.

2017-12-01

The seismic site response in an area depends mainly on the local geological and topographical conditions. Estimation of variations in ground motion can lead to significant contributions on seismic hazard assessment, in order to reduce human and economic losses. Site response estimation can be posed as a parameterized inversion approach which allows separating source and path effects. The generalized inversion (Field and Jacob, 1995) represents one of the alternative methods to estimate the local seismic response, which involves solving a strongly non-linear multiparametric problem. In this work, local seismic response was estimated using global optimization methods (Genetic Algorithms and Simulated Annealing) which allowed us to increase the range of explored solutions in a nonlinear search, as compared to other conventional linear methods. By using the VEOX Network velocity records, collected from August 2007 to March 2009, source, path and site parameters corresponding to the amplitude spectra of the S wave of the velocity seismic records are estimated. We can establish that inverted parameters resulting from this simultaneous inversion approach, show excellent agreement, not only in terms of adjustment between observed and calculated spectra, but also when compared to previous work from several authors.

The comparison between the effectiveness of six different tooth brushing methods on removing dental bacterial plaque

Directory of Open Access Journals (Sweden)

Saghazadeh M.

2004-07-01

Full Text Available Statement of Problem: There are different tooth brushing methods for removing dental plaque from tooth surfaces. The effectiveness of these methods, and the time needed for instruction, learning and using seem to be different. Also, it is possible that the effectiveness of each method reduces with time, based on its difficulty level and the reduction of the patient s attention in following the given instructions. Purpose: The aim of this research was to compare the effectiveness of six different accepted tooth brushing methods on total and specific teeth, as well as on special tooth surfaces. The research also compared the time needed for instruction, learning and using the methods. Materials and Methods: The study was designed as a single blind randomised controlled trial protocol to compare the six accepted tooth brushing methods: Roll, Bass, Charters (C, Modified Stillman (MS, and Modified Bass in two ways (MB1-MB2. 15 volunteers were selected from the basic science level dental students at Tehran University of Medical Sciences. All the six methods were instructed to each volunteer, using a randomly selected sequence. Each participant should, therefore, pass six consequent courses, by the same sequences as follow: 1st Visit: After polishing the teeth, the participant was asked to abstain any kind of tooth cleaning. - 2nd visit (48-72 hours later: O Leary Plaque Index (PI was recorded and then the randomised selected method was instructed. Then, the participant brushed his/her teeth and PI was registered again. The time needed for instruction and using the method was registered too. The participant was then asked to use this newly learned tooth brushing method twice a day for 7±1 days. - 3rd visit (7±1 days later: PI was recorded. The teeth were polished. The participant was asked to abstain any kind of tooth cleaning for 48-72 hours, as washout period of the previous method and preparation period for the next method (2nd visit of the next

Methods of alleviation of ionospheric scintillation effects on digital communications

Science.gov (United States)

Massey, J. L.

1974-01-01

The degradation of the performance of digital communication systems because of ionospheric scintillation effects can be reduced either by diversity techniques or by coding. The effectiveness of traditional space-diversity, frequency-diversity and time-diversity techniques is reviewed and design considerations isolated. Time-diversity signaling is then treated as an extremely simple form of coding. More advanced coding methods, such as diffuse threshold decoding and burst-trapping decoding, which appear attractive in combatting scintillation effects are discussed and design considerations noted. Finally, adaptive coding techniques appropriate when the general state of the channel is known are discussed.

Quantifying and Comparing Effects of Climate Engineering Methods on the Earth System

Science.gov (United States)

Sonntag, Sebastian; Ferrer González, Miriam; Ilyina, Tatiana; Kracher, Daniela; Nabel, Julia E. M. S.; Niemeier, Ulrike; Pongratz, Julia; Reick, Christian H.; Schmidt, Hauke

2018-02-01

To contribute to a quantitative comparison of climate engineering (CE) methods, we assess atmosphere-, ocean-, and land-based CE measures with respect to Earth system effects consistently within one comprehensive model. We use the Max Planck Institute Earth System Model (MPI-ESM) with prognostic carbon cycle to compare solar radiation management (SRM) by stratospheric sulfur injection and two carbon dioxide removal methods: afforestation and ocean alkalinization. The CE model experiments are designed to offset the effect of fossil-fuel burning on global mean surface air temperature under the RCP8.5 scenario to follow or get closer to the RCP4.5 scenario. Our results show the importance of feedbacks in the CE effects. For example, as a response to SRM the land carbon uptake is enhanced by 92 Gt by the year 2100 compared to the reference RCP8.5 scenario due to reduced soil respiration thus reducing atmospheric CO2. Furthermore, we show that normalizations allow for a better comparability of different CE methods. For example, we find that due to compensating processes such as biogeophysical effects of afforestation more carbon needs to be removed from the atmosphere by afforestation than by alkalinization to reach the same global warming reduction. Overall, we illustrate how different CE methods affect the components of the Earth system; we identify challenges arising in a CE comparison, and thereby contribute to developing a framework for a comparative assessment of CE.

Blackness coefficients, effective diffusion parameters, and control rod worths for thermal reactors - Methods

Energy Technology Data Exchange (ETDEWEB)

Bretscher, M M [Argonne National Laboratory, Argonne, IL 60439 (United States)

1985-07-01

Simple diffusion theory cannot be used to evaluate control rod worths in thermal neutron reactors because of the strongly absorbing character of the control material. However, reliable control rod worths can be obtained within the framework of diffusion theory if the control material is characterized by a set of mesh-dependent effective diffusion parameters. For thin slab absorbers the effective diffusion parameters can be expressed as functions of a suitably-defined pair of 'blackness coefficients'. Methods for calculating these blackness coefficients in the P1, P3, and P5 approximations, with and without scattering, are presented. For control elements whose geometry does not permit a thin slab treatment, other methods are needed for determining the effective diffusion parameters. One such method, based on reaction rate ratios, is discussed. (author)

Imaging sensory effects of occipital nerve stimulation: a new computer-based method in neuromodulation.

Science.gov (United States)

Göbel, Anna; Göbel, Carl H; Heinze, Axel; Heinze-Kuhn, Katja; Petersen, Inga; Meinecke, Christoph; Clasen, Svenja; Niederberger, Uwe; Rasche, Dirk; Mehdorn, Hubertus M; Göbel, Hartmut

2015-01-01

Within the last years, occipital nerve stimulation (ONS) has proven to be an important method in the treatment of severe therapy-resistant neurological pain disorders. The correspondence between lead placement as well as possible stimulation parameters and the resulting stimulation effects remains unclear. The method aims to directly relate the neuromodulatory mechanisms with the clinical treatment results, to achieve insight in the mode of action of neuromodulation, to identify the most effective stimulation sets and to optimize individual treatment effects. We describe a new computer-based imaging method for mapping the spatial, cognitive and affective sensory effects of ONS. The procedure allows a quantitative and qualitative analysis of the relationship between lead positioning, the stimulation settings as well as the sensory and clinical stimulation effects. A regular mapping of stimulation and sensory parameters allows a coordinated monitoring. The stimulation results can be reviewed and compared with regards to clinical effectiveness. Copyright © 2015 Elsevier Inc. All rights reserved.

An alternative green screen keying method for film visual effects

OpenAIRE

Zhi, Jin

2015-01-01

This study focuses on a green screen keying method developed especially for film visual effects. There are a series of ways of using existing tools for creating mattes from green or blue screen plates. However, it is still a time-consuming process, and the results vary especially when it comes to retaining tiny details, such as hair and fur. This paper introduces an alternative concept and method for retaining edge details of characters on a green screen plate, also, a number of connected mat...

Pattern recognition in spectra

International Nuclear Information System (INIS)

Gebran, M; Paletou, F

2017-01-01

We present a new automated procedure that simultaneously derives the effective temperature T eff , surface gravity log g , metallicity [ Fe/H ], and equatorial projected rotational velocity v e sin i for stars. The procedure is inspired by the well-known PCA-based inversion of spectropolarimetric full-Stokes solar data, which was used both for Zeeman and Hanle effects. The efficiency and accuracy of this procedure have been proven for FGK, A, and late type dwarf stars of K and M spectral types. Learning databases are generated from the Elodie stellar spectra library using observed spectra for which fundamental parameters were already evaluated or with synthetic data. The synthetic spectra are calculated using ATLAS9 model atmospheres. This technique helped us to detect many peculiar stars such as Am, Ap, HgMn, SiEuCr and binaries. This fast and efficient technique could be used every time a pattern recognition is needed. One important application is the understanding of the physical properties of planetary surfaces by comparing aboard instrument data to synthetic ones. (paper)

Validity and cost-effectiveness of methods for screening of primary open angle glaucoma

Directory of Open Access Journals (Sweden)

Fröschl, Barbara

2007-02-01

Full Text Available Health political background: About 950,000 people are affected by glaucoma in Germany, about 50% of which are undiagnosed. The German Ophthalmological Society and the German Association of Ophthalmologists recommend a screening for glaucoma according to their guidelines. The Federal Joint Committee disapproved a glaucoma-screening program on expense of the compulsory health insurance in 2004. Scientific background: Primary open angle glaucoma is diagnosed by evaluation of the optic disc, the retinal fibre layer and the visual field. The main examinations are ophthalmoscopy, scanning laser polarimetry, confocal scanning laser ophthalmoscopy, retinal thickness analysis and optical coherence tomography. Scotomas are diagnosed by perimetry (standard automated perimetry, short wavelength automated perimetry and frequency doubling perimetry. The intraocular pressure is the most important treatable risk factor and is measured by (contact or non-contact tonometry. Research questions: The aim of this HTA-report is to investigate the diagnostic validity and cost effectiveness of diagnostic techniques or combinations of these methods with respect to the use in a screening setting in Germany. Methods: A systematic literature research was performed in 35 international databases and yielded 2602 articles. Overall 57 publications were included for assessment, according to predefined selection criteria. Results: The 55 medical articles deal mainly with frequency doubling perimetry, confocal scanning laser ophthalmoscopy and scanning laser polarimetry. Few articles cover short wavelength automated perimetry, tonometry and ophalmocopic evaluations by ophthalmologists. The quality of the papers is generally low, as far as the evidence in respect of screening is concerned. No single method exists with both, high sensitivity and high specificity for screening purpose. Data are also not sufficient to recommend combinations of methods. Only two economic models on cost

Effectiveness of Inductive and Deductive Methods in Teaching Grammar

Directory of Open Access Journals (Sweden)

Mohammad Akram Alzu’bi

2015-04-01

• What is the effect of inductive method on grammar achievement compared with deductive method at elementary stage? To answer the questions of the study, the researcher prepares two programs based on inductive and deductive methods for each level based on its syllabus. The sample consists 180 students; eighty at the 1st year level in English departments at university level and one hundred at the elementary stage. The participants of the study consisted of four assigned sections. Firstly, at the university level, two colleges are randomly selected out of the eighteen faculties of Albalqa' Applied University; two sections are randomly selected; one group is randomly assigned as the 1st experimental group (by using inductive method and the second experimental group (by using deductive method. Similar process is adopted in the case of school students at the elementary stage.  The relevant pre-tests are administered to the students of both groups at each stage (university and school to make sure that the groups are equivalent at the time of starting the experiment. The researcher designs two grammar achievement tests as the instruments of this study (one for the elementary stage and one for university level. The instrument of each stage consists of two achievement tests (pre- test and post-test. At the end of the treatment period, relevant post-tests are administered to the students of both the groups. The results of the study revealed that there were significant statistical differences at (α≤0.09 among the grammar performance means of both groups at both levels due to inductive method. Keywords: Inductive method, Deductive method, Elementary stage, University level, Academic achievement

Do different methods of modeling statin treatment effectiveness influence the optimal decision?

NARCIS (Netherlands)

B.J.H. van Kempen (Bob); B.S. Ferket (Bart); A. Hofman (Albert); S. Spronk (Sandra); E.W. Steyerberg (Ewout); M.G.M. Hunink (Myriam)

2012-01-01

textabstractPurpose. Modeling studies that evaluate statin treatment for the prevention of cardiovascular disease (CVD) use different methods to model the effect of statins. The aim of this study was to evaluate the impact of using different modeling methods on the optimal decision found in such

The Effect of Instructional Methods and Cognitive Styles toward Speaking Skill

Directory of Open Access Journals (Sweden)

Nita Kaniadewi

2017-01-01

Full Text Available This study investigated the effect of instructional method s and students’ cognitive styles toward speaking skill. It was an experimental research using a two -factor ANOVA at 0.05 and 0.01 significance level. Because an interaction between the variables involved was found, the analysis was then continued by Tuckey Test. The data was collected using oral test rating cale and a cognitive style questionnaire. The findings showed the following points: (1 the speaking skill of the students taught by CLL (Cooperative Language Learning was higher than the students taught by TBL(Task-Based Language Learning; (2 the speaking skill of FD (Field Dependent students was higher than FI (Field Independent students; (3 there was an interaction between instructional methods and cognitive style to speaking skill; (4 the speaking skill of the students taught by CLL was higher than the students taught by TBL in the group of FD students; (5 there was no significant difference of the speaking skill of the students taught by CLL and the students taught by TBL in the group of FI students. The findings above led to a conclusion that generally CLL was more effective than TBL in teaching speaking skill. Moreover, besides instructional methods, cognitive style also gives a significant effect to students’ speaking skill

[Cancer nursing care education programs: the effectiveness of different teaching methods].

Science.gov (United States)

Cheng, Yun-Ju; Kao, Yu-Hsiu

2012-10-01

In-service education affects the quality of cancer care directly. Using classroom teaching to deliver in-service education is often ineffective due to participants' large workload and shift requirements. This study evaluated the learning effectiveness of different teaching methods in the dimensions of knowledge, attitude, and learning satisfaction. This study used a quasi-experimental study design. Participants were cancer ward nurses working at one medical center in northern Taiwan. Participants were divided into an experimental group and control group. The experimental group took an e-learning course and the control group took a standard classroom course using the same basic course material. Researchers evaluated the learning efficacy of each group using a questionnaire based on the quality of cancer nursing care learning effectiveness scale. All participants answered the questionnaire once before and once after completing the course. (1) Post-test "knowledge" scores for both groups were significantly higher than pre-test scores for both groups. Post-test "attitude" scores were significantly higher for the control group, while the experimental group reported no significant change. (2) after a covariance analysis of the pre-test scores for both groups, the post-test score for the experimental group was significantly lower than the control group in the knowledge dimension. Post-test scores did not differ significantly from pre-test scores for either group in the attitude dimension. (3) Post-test satisfaction scores between the two groups did not differ significantly with regard to teaching methods. The e-learning method, however, was demonstrated as more flexible than the classroom teaching method. Study results demonstrate the importance of employing a variety of teaching methods to instruct clinical nursing staff. We suggest that both classroom teaching and e-learning instruction methods be used to enhance the quality of cancer nursing care education programs. We

Methods of measuring the effectiveness of Lean Management

Directory of Open Access Journals (Sweden)

Marcel Lizak

2016-12-01

Full Text Available Invalid organisation of the production environment in an enterprise is the cause of many disruptions during the implementation of production processes. Lean Management is aimed at improving processes and eliminating interference in accordance with the Kaizen principle. A significant element of management constantly analyses and measures the improved results. The article presents the results of the literature research from the scope of observation methods and measuring the effects of the use of Lean Management instruments in manufacturing companies.

A Comparison between the Effect of Cooperative Learning Teaching Method and Lecture Teaching Method on Students' Learning and Satisfaction Level

Science.gov (United States)

Mohammadjani, Farzad; Tonkaboni, Forouzan

2015-01-01

The aim of the present research is to investigate a comparison between the effect of cooperative learning teaching method and lecture teaching method on students' learning and satisfaction level. The research population consisted of all the fourth grade elementary school students of educational district 4 in Shiraz. The statistical population…

Effect of Different Sterilization Methods on the Extracted Oil from Oil Palm Fruit

International Nuclear Information System (INIS)

Hasimah Kasmin; Hasimah Kasmin; Roila Awang; Azwan Mat Lazim

2015-01-01

Sterilization is important process during the processing of oil palm fruits in order to produce crude palm oil (CPO). This process can be carried out using steam (conventional method), dry heating or wet heating method. In this study, the effectiveness of the dry heating and wet heating method for sterilization and solvent extraction were carried out. The sterilization time of these two methods were varied at 30, 60 and 90 min in order to determine their effectiveness on the oil extraction and their quality. Results showed that, at 30 min of sterilization, the wet heating produced a higher percentage of oil extraction compared to the conventional and dry heating, with average of 27.65 %, 19.01 % and 20.21 % respectively. In comparison with the conventional method, both sterilization methods gave better FFA and DOBI results. This can be seen where the average of free fatty acid (FFA) content for proposed sterilization method was between 0.37 % to 0.93 % while, average deterioration of bleach ability index (DOBI) was from 4.89 to 6.12. The average carotene content was in agreement with the conventional method at a range of 644.64 ppm to 764.80 ppm. (author)

Effective Alternating Direction Optimization Methods for Sparsity-Constrained Blind Image Deblurring

Directory of Open Access Journals (Sweden)

Naixue Xiong

2017-01-01

Full Text Available Single-image blind deblurring for imaging sensors in the Internet of Things (IoT is a challenging ill-conditioned inverse problem, which requires regularization techniques to stabilize the image restoration process. The purpose is to recover the underlying blur kernel and latent sharp image from only one blurred image. Under many degraded imaging conditions, the blur kernel could be considered not only spatially sparse, but also piecewise smooth with the support of a continuous curve. By taking advantage of the hybrid sparse properties of the blur kernel, a hybrid regularization method is proposed in this paper to robustly and accurately estimate the blur kernel. The effectiveness of the proposed blur kernel estimation method is enhanced by incorporating both the L 1 -norm of kernel intensity and the squared L 2 -norm of the intensity derivative. Once the accurate estimation of the blur kernel is obtained, the original blind deblurring can be simplified to the direct deconvolution of blurred images. To guarantee robust non-blind deconvolution, a variational image restoration model is presented based on the L 1 -norm data-fidelity term and the total generalized variation (TGV regularizer of second-order. All non-smooth optimization problems related to blur kernel estimation and non-blind deconvolution are effectively handled by using the alternating direction method of multipliers (ADMM-based numerical methods. Comprehensive experiments on both synthetic and realistic datasets have been implemented to compare the proposed method with several state-of-the-art methods. The experimental comparisons have illustrated the satisfactory imaging performance of the proposed method in terms of quantitative and qualitative evaluations.

The Reliability, Impact, and Cost-Effectiveness of Value-Added Teacher Assessment Methods

Science.gov (United States)

Yeh, Stuart S.

2012-01-01

This article reviews evidence regarding the intertemporal reliability of teacher rankings based on value-added methods. Value-added methods exhibit low reliability, yet are broadly supported by prominent educational researchers and are increasingly being used to evaluate and fire teachers. The article then presents a cost-effectiveness analysis…

Assessment of reagent effectiveness and preservation methods for equine faecal samples

Directory of Open Access Journals (Sweden)

Eva Vavrouchova

2015-03-01

Full Text Available The aim of our study was to identify the most suitable flotation solution and effective preservation method for the examination of equine faeces samples using the FLOTAC technique. Samples from naturally infected horses were transported to the laboratory andanalysed accordingly. The sample from each horse was homogenized and divided into four parts: one was frozen, another two were preserved in different reagents such as sodium acetate-acetic-acid–formalin (SAF or 5% formalin.The last part was examined as a fresh sample in three different flotation solutions (Sheather´s solution, sodium chloride and sodium nitrate solution, all with a specific gravity 1.200. The preserved samples were examined in the period from 14 to21days after collection. According to our results, the sucrose solution was the most suitable flotation solution for fresh samples (small strongyle egg per gram was 706 compared to 360 in sodium chlorid and 507 in sodium nitrate and the sodium nitrate solution was the most efficient for the preserved samples (egg per gram was 382 compared to 295 in salt solution and 305 in sucrose solution. Freezing appears to be the most effective method of sample preservation, resulting in minimal damage to fragile strongyle eggs and therefore it is the most simple and effective preservation method for the examination of large numbers of faecal samples without the necessity of examining them all within 48 hours of collection. Deep freezing as a preservation method for equine faeces samples has not, according to our knowledge, been yet published.

Quantitative sacroiliac scintigraphy. The effect of method of selection of region of interest

International Nuclear Information System (INIS)

Davis, M.C.; Turner, D.A.; Charters, J.R.; Golden, H.E.; Ali, A.; Fordham, E.W.

1984-01-01

Various authors have advocated quantitative methods of evaluating bone scintigrams to detect sacroiliitis, while others have not found them useful. Many explanations for this disagreement have been offered, including differences in the method of case selection, ethnicity, gender, and previous drug therapy. It would appear that one of the most important impediments to consistent results is the variability of selecting sacroiliac joint and reference regions of interest (ROIs). The effect of ROI selection would seem particularly important because of the normal variability of radioactivity within the reference regions that have been used (sacrum, spine, iliac wing) and the inhomogeneity of activity in the SI joints. We have investigated the effect of ROI selection, using five different methods representative of, though not necessarily identical to, those found in the literature. Each method produced unique mean indices that were different for patients with ankylosing spondylitis (AS) and controls. The method of Ayres (19) proved superior (largest mean difference, smallest variance), but none worked well as a diagnostic tool because of substantial overlap of the distributions of indices of patient and control groups. We conclude that ROI selection is important in determining results, and quantitative scintigraphic methods in general are not effective tools for diagnosing AS. Among the possible factors limiting success, difficulty in selecting a stable reference area seems of particular importance

Effects Of Combinations Of Patternmaking Methods And Dress Forms On Garment Appearance

Directory of Open Access Journals (Sweden)

Fujii Chinami

2017-09-01

Full Text Available We investigated the effects of the combinations of patternmaking methods and dress forms on the appearance of a garment. Six upper garments were made using three patternmaking methods used in France, Italy, and Japan, and two dress forms made in Japan and France. The patterns and the appearances of the garments were compared using geometrical measurements. Sensory evaluations of the differences in garment appearance and fit on each dress form were also carried out. In the patterns, the positions of bust and waist darts were different. The waist dart length, bust dart length, and positions of the bust top were different depending on the patternmaking method, even when the same dress form was used. This was a result of differences in the measurements used and the calculation methods employed for other dimensions. This was because the ideal body shape was different for each patternmaking method. Even for garments produced for the same dress form, the appearances of the shoulder, bust, and waist from the front, side, and back views were different depending on the patternmaking method. As a result of the sensory evaluation, it was also found that the bust and waist shapes of the garments were different depending on the combination of patternmaking method and dress form. Therefore, to obtain a garment with better appearance, it is necessary to understand the effects of the combinations of patternmaking methods and body shapes.

Effects of the Pilates method on neck pain: a systematic review

OpenAIRE

Cemin, Natália Fernanda; Schmit, Emanuelle Francine Detogni; Candotti, Cláudia Tarragô

2017-01-01

Abstract Introduction: The Pilates method has been used for neck pain reduction. Objective: To systematically review randomized and non-randomized controlled trials that assessed the effects of Pilates on neck pain when compared to other groups (CRD42015025987). Methods: This study involved a systematic review directed by the PRISMA Statement based on the recommendations of the Cochrane Colaboration, registered in PROSPERO under the code CRD42015025987. The following databases were searche...

Method of forming latent image to protect documents based on the effect moire

OpenAIRE

Troyan, О.

2015-01-01

Analysis of modern methods of information protection based on printed documents. It is shown that methods of protection from moiré effect provide reliable and effective protection by gaining new protection technology that is displayed in the optical acceleration motion layers and causes moire in fraud. Latent images can securely protect paper documents. Introduce a system of equations to calculate curvilinear patterns, where the optical formula of acceleration and periods moire stored in i...

Comparison of Standard Culture-Based Method to Culture-Independent Method for Evaluation of Hygiene Effects on the Hand Microbiome.

Science.gov (United States)

Zapka, C; Leff, J; Henley, J; Tittl, J; De Nardo, E; Butler, M; Griggs, R; Fierer, N; Edmonds-Wilson, S

2017-03-28

Hands play a critical role in the transmission of microbiota on one's own body, between individuals, and on environmental surfaces. Effectively measuring the composition of the hand microbiome is important to hand hygiene science, which has implications for human health. Hand hygiene products are evaluated using standard culture-based methods, but standard test methods for culture-independent microbiome characterization are lacking. We sampled the hands of 50 participants using swab-based and glove-based methods prior to and following four hand hygiene treatments (using a nonantimicrobial hand wash, alcohol-based hand sanitizer [ABHS], a 70% ethanol solution, or tap water). We compared results among culture plate counts, 16S rRNA gene sequencing of DNA extracted directly from hands, and sequencing of DNA extracted from culture plates. Glove-based sampling yielded higher numbers of unique operational taxonomic units (OTUs) but had less diversity in bacterial community composition than swab-based sampling. We detected treatment-induced changes in diversity only by using swab-based samples ( P hand hygiene industry methods and for future hand microbiome studies. On the basis of our results and previously published studies, we propose recommendations for best practices in hand microbiome research. IMPORTANCE The hand microbiome is a critical area of research for diverse fields, such as public health and forensics. The suitability of culture-independent methods for assessing effects of hygiene products on microbiota has not been demonstrated. This is the first controlled laboratory clinical hand study to have compared traditional hand hygiene test methods with newer culture-independent characterization methods typically used by skin microbiologists. This study resulted in recommendations for hand hygiene product testing, development of methods, and future hand skin microbiome research. It also demonstrated the importance of inclusion of skin physiological metadata in

SMALL GROUP LEARNING METHODS AND THEIR EFFECT ON LEARNERS’ RELATIONSHIPS

Directory of Open Access Journals (Sweden)

Radka Borůvková

2016-04-01

Full Text Available Building relationships in the classroom is an essential part of any teacher's career. Having healthy teacher-to-learner and learner-to-learner relationships is an effective way to help prevent pedagogical failure, social conflict and quarrelsome behavior. Many strategies are available that can be used to achieve good long-lasting relationships in the classroom setting. Successful teachers’ pedagogical work in the classroom requires detailed knowledge of learners’ relationships. Good understanding of the relationships is necessary, especially in the case of teenagers’ class. This sensitive period of adolescence demands attention of all teachers who should deal with the problems of their learners. Special care should be focused on children that are out of their classmates’ interest (so called isolated learners or isolates in such class and on possibilities to integrate them into the class. Natural idea how to do it is that of using some modern non-traditional teaching/learning methods, especially the methods based on work in small groups involving learners’ cooperation. Small group education (especially problem-based learning, project-based learning, cooperative learning, collaborative learning or inquire-based learning as one of these methods involves a high degree of interaction. The effectiveness of learning groups is determined by the extent to which the interaction enables members to clarify their own understanding, build upon each other's contributions, sift out meanings, ask and answer questions. An influence of this kind of methods (especially cooperative learning (CL on learners’ relationships was a subject of the further described research. Within the small group education, students work with their classmates to solve complex and authentic problems that help develop content knowledge as well as problem-solving, reasoning, communication, and self-assessment skills. The aim of the research was to answer the question: Can the

Effectiveness comparison of endoscopic methods of non-varicose upper gastrointestinal bleeding treatment

OpenAIRE

Kujawski, Krzysztof; Stasiak, Magdalena; Stępień, Mariusz; Rysz, Jacek

2010-01-01

Introduction In every case of upper gastrointestinal bleeding suspicion, an endoscopic examination ought to be performed as a matter of urgency. Finding active bleeding, a visible non-bleeding vessel or a lesion with an adherent clot should be followed by application of an available method of endoscopic therapy. The aim of the study was to compare the effectiveness of various endoscopic treatment techniques such as epinephrine injections, coagulation methods and mechanical methods in the trea...

Effects of the rate and methods of placement of K-fertilizer in

Directory of Open Access Journals (Sweden)

mehrdad mahloji

2009-06-01

Full Text Available In order to study the effects of potassium amounts and methods of potassium application in different systems of tillaging on barley cultivar of Karoon*Kavir grain yield in salinity stress conditions, a farm trail was conducted in a split block arrangement in three replications with a Randomized Complete Block Design at Roodasht salinity and drainage research station (Esfahan province in 2003-5. Experimental treatments were soil tillage systems, potassium fertilizer amounts and its, placement methods. The main plots were soil till systems (conventional, minimum and no tillage.The horizontal treatments were recommended (300 kg/ha potassium sulfate, 33% lower and 33% higher than recommended amounts of potassium fertilizer. The vertical treatments in main plots were fertilizer placement methods (spreading and strip replacement of fertilizer 5 centimeter under the seeds. The water salinity of irrigation after spring growth stage was 12 ds/m. The conventional irrigation before spring growth stage is river water supply. The ANOVA results showed that: In the first year of study, the different soil till systems effected significantly(p = 0.01 plant height, number of spike per square meter, the concentration of minerals in leaf, grain yield, biological yield and harvest index. The fertilizer applications and its, placement effects on above-mentioned traits were not significant. The highest grain yield (3213 Kg/ha obtained in conventional till. In the second year of experiment: soil tillage systems, the potassium fertilizer amounts and fertilizer placements had no significant effect on grain and biological yields of barley cultivar. The two-year study results showed that: The conventional till system is a suitable method for planting barley in soils with clay loam texture. In spite of higher amounts of potassium fertilizer application and higher amount of absorbable K+ in the soil, there were no significant effect on grain yield and its components.

Practical method of dynamic analysis considering coupling effects between equipment and piping systems

International Nuclear Information System (INIS)

Koyanagi, Ryoichi

1984-01-01

Many piping systems are supported by flexible structures or attached to thin shell walls so it is very important to consider the dynamic coupling effects between these systems in dynamic analysis. This paper presents a practical method of dynamic analysis of an individual system considering the dynamic coupling effects of coupled equipment-piping systems. In this method, dynamic responses are calculated by using the modal information which is obtained from the other analysis for associative structure. Analytical results for the complete model and of this method for an individual system are presented in the piping-supporting structure system and a piping-shell system. From the comparison of these results, it shows that this method is accurate, useful and economically applicable to the dynamic analysis of large model. (author)

Nonlinear effect of the structured light profilometry in the phase-shifting method and error correction

International Nuclear Information System (INIS)

Zhang Wan-Zhen; Chen Zhe-Bo; Xia Bin-Feng; Lin Bin; Cao Xiang-Qun

2014-01-01

Digital structured light (SL) profilometry is increasingly used in three-dimensional (3D) measurement technology. However, the nonlinearity of the off-the-shelf projectors and cameras seriously reduces the measurement accuracy. In this paper, first, we review the nonlinear effects of the projector–camera system in the phase-shifting structured light depth measurement method. We show that high order harmonic wave components lead to phase error in the phase-shifting method. Then a practical method based on frequency domain filtering is proposed for nonlinear error reduction. By using this method, the nonlinear calibration of the SL system is not required. Moreover, both the nonlinear effects of the projector and the camera can be effectively reduced. The simulations and experiments have verified our nonlinear correction method. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

A Method for Effective Conversion of Saccharides to Furfural Compounds

DEFF Research Database (Denmark)

2015-01-01

The present invention relates to a method for the effective conversion of one or more mono-, di-, oligo- or polysaccharides to hydroxymethylfurfural (HMF), in an ionic liquid by means of a chromium catalyst mixture comprising chromium (II) and chromium (III) species. The invention also provides a...

Physics of solar prominences. Proceedings of the Colloquium, Oslo, Norway, August 14-18, 1978

Energy Technology Data Exchange (ETDEWEB)

Jensen, E; Maltby, P

1979-01-01

These papers deal with recent theoretical and observational studies of the physics of solar prominences. Specific topics include reviews of prominence spectra and their interpretation, polarimetric observations and magnetic-field determination in prominences, observations of the prominence-corona interface, theories on the formation and stability of quiescent prominences, prominence classifications, observations of active prominences, observations and interpretations of coronal manifestations of eruptive prominences, and models of prominence structure and dynamics. Other contributions discuss simultaneous observations of Ca II and hydrogen Balmer lines in quiescent prominences, recent results in quiescent-prominence spectroscopy, the solar helium abundance obtained from optical spectra of quiescent prominences, and Stokes polarimetry of quiescent prominences in the He I D3 line. Magnetic-field determination based on the Hanle effect is also examined, along with the orientation of prominence microstructure relative to magnetic-field direction, radio observations of quiescent-prominence filaments at centimeter and millimeter wavelengths, EUV observations of filaments, and a magnetic-field reconnection model of quiescent prominences.

Laser spectroscopy on atoms and ions using short-wavelength radiation

International Nuclear Information System (INIS)

Larsson, Joergen.

1994-05-01

Radiative properties and energy structures in atoms and ions have been investigated using UV/VUV radiation. In order to obtain radiation at short wavelengths, frequency mixing of pulsed laser radiation in crystals and gases has been performed using recently developed frequency-mixing schemes. To allow the study of radiative lifetimes shorter than the pulses from standard Q-switched lasers, different techniques have been used to obtain sufficiently short pulses. The Hanle effect has been employed following pulsed laser excitation for the same purpose. High-resolution spectroscopic techniques have been adapted for use with the broad-band, pulsed laser sources which are readily available in the UV/VUV spectral region. In order to investigate sources of radiation in the XUV and soft X-ray spectral regions, harmonic generation in rare gases has been studied. The generation of coherent radiation by the interaction between laser radiation and relativistic electrons in a synchrotron storage ring has also been investigated. 60 refs

Effects of Pilates method in elderly people: Systematic review of randomized controlled trials.

Science.gov (United States)

de Oliveira Francisco, Cristina; de Almeida Fagundes, Alessandra; Gorges, Bruna

2015-07-01

The Pilates method has been widely used in physical training and rehabilitation. Evidence regarding the effectiveness of this method in elderly people is limited. Six randomized controlled trials studies involving the use of the Pilates method for elderly people, published prior to December 2013, were selected from the databases PubMed, MEDLINE, Embase, Cochrane, Scielo and PEDro. Three articles suggested that Pilates produced improvements in balance. Two studies evaluated the adherence to Pilates programs. One study assessed Pilates' influence on cardio-metabolic parameters and another study evaluated changes in body composition. Strong evidence was found regarding beneficial effects of Pilates over static and dynamic balance in women. Nevertheless, evidence of balance improvement in both genders, changes in body composition in woman and adherence to Pilates programs were limited. Effects on cardio-metabolic parameters due to Pilates training presented inconclusive results. Pilates may be a useful tool in rehabilitation and prevention programs but more high quality studies are necessary to establish all the effects on elderly populations. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effect of drying method to antioxidants capacity of Limnophila aromatica

Science.gov (United States)

Yen, Tran Thi Ngoc; Vu, Nguyen Hoang

2017-09-01

Limnophila aromatica is widely used in South East Asian countries to make spices in food and medicine in traditional medicine. The use value of vegetables is known because some of the lesser constituents in plants are called antioxidants. These active ingredients have not been fully researched and their pharmacological effects are underestimated. In this study, the drying temperature at 40 °C was showed that the antioxidant activity decreased the most. The drying temperature of 50 °C is suitable for convection drying method and drying temperature of 60 °C suitable for vacuum drying, as it retains the most antioxidant properties. Regarding the drying method, freeze drying proved to be effective when retaining high antioxidant capacity. Using The convection drying at 50 °C and the vacuum drying at 60 °C, the antioxidant activity of Limnophila aromatica was not different. Over 6 weeks of preservation, the dried product has deterioration in antioxidant properties.

A Preliminary Study of the Effectiveness of Different Recitation Teaching Methods

Science.gov (United States)

Endorf, Robert J.; Koenig, Kathleen M.; Braun, Gregory A.

2006-02-01

We present preliminary results from a comparative study of student understanding for students who attended recitation classes which used different teaching methods. Student volunteers from our introductory calculus-based physics course attended a special recitation class that was taught using one of four different teaching methods. A total of 272 students were divided into approximately equal groups for each method. Students in each class were taught the same topic, "Changes in energy and momentum," from Tutorials in Introductory Physics. The different teaching methods varied in the amount of student and teacher engagement. Student understanding was evaluated through pretests and posttests given at the recitation class. Our results demonstrate the importance of the instructor's role in teaching recitation classes. The most effective teaching method was for students working in cooperative learning groups with the instructors questioning the groups using Socratic dialogue. These results provide guidance and evidence for the teaching methods which should be emphasized in training future teachers and faculty members.

A method to eliminate the effect of protein binding on GFR

International Nuclear Information System (INIS)

Prabakaran, K.; Fernandes, V.; Nour, R.

1998-01-01

Full text: Plasma clearance of 99m Tc-DTPA is a standard method for GFR assessment. Protein binding (PB) of 99m Tc-DTPA is thought to affect the accuracy of the GFR measurement. Therefore, eliminating PB portion would improve the accuracy of this measurement. Methods to eliminate PB are usually complex, but a simple Amicon micropartition system has been proposed to eliminate the PB effect. This study is aimed to assess if this simple method effectively excluded the PB fraction and improved the accuracy of the GFR measurement. Therefore, eliminating PB portion would improve the accuracy of this measurement. Methods to eliminate PB are usually complex, but a simple Amicon micropartition system separates free 99m Tc-DTPA from the PB fraction after a 10 min centrifugation of patient plasma. The ultrafiltrate obtained is totally free of PB 99m Tc-DTPA. 20 consecutive patients had GFRs performed using the two sample method with blood drawn at 60 and 150 min. All samples had an Ultrafiltrate 99m Tc-DTPA and normal plasma 99m Tc-DTPA. The GFRs were calculated from both samples. The findings showed a mean PB of 6.5 + 3.9% and 13 + 5.0% at 60 min and 150 min respectively for our DTPA. The mean GFR from normal plasma 85.7 + 26.4 mL/min and from ultrafiltrate = 97.2 + 28.8 mL/min. Statistical analysis using Student''s ''t'' test shows that there is a significant difference between the values of GFR (P < 0.05). Our result confirms that the PB of DTPA is substantial and affects the GFR estimation significantly. The method of ultrafiltration eliminates the PB, and very simple to use. This method could be used on a routine basis and/or to assess the suitability of the DTPA used in various departments for GFR measurement

Proposal for a method to estimate nutrient shock effects in bacteria

Directory of Open Access Journals (Sweden)

Azevedo Nuno F

2012-08-01

Full Text Available Abstract Background Plating methods are still the golden standard in microbiology; however, some studies have shown that these techniques can underestimate the microbial concentrations and diversity. A nutrient shock is one of the mechanisms proposed to explain this phenomenon. In this study, a tentative method to assess nutrient shock effects was tested. Findings To estimate the extent of nutrient shock effects, two strains isolated from tap water (Sphingomonas capsulata and Methylobacterium sp. and two culture collection strains (E. coli CECT 434 and Pseudomonas fluorescens ATCC 13525 were exposed both to low and high nutrient conditions for different times and then placed in low nutrient medium (R2A and rich nutrient medium (TSA. The average improvement (A.I. of recovery between R2A and TSA for the different times was calculated to more simply assess the difference obtained in culturability between each medium. As expected, A.I. was higher when cells were plated after the exposition to water than when they were recovered from high-nutrient medium showing the existence of a nutrient shock for the diverse bacteria used. S. capsulata was the species most affected by this phenomenon. Conclusions This work provides a method to consistently determine the extent of nutrient shock effects on different microorganisms and hence quantify the ability of each species to deal with sudden increases in substrate concentration.

Quantifying the interplay effect in prostate IMRT delivery using a convolution-based method

International Nuclear Information System (INIS)

Li, Haisen S.; Chetty, Indrin J.; Solberg, Timothy D.

2008-01-01

The authors present a segment-based convolution method to account for the interplay effect between intrafraction organ motion and the multileaf collimator position for each particular segment in intensity modulated radiation therapy (IMRT) delivered in a step-and-shoot manner. In this method, the static dose distribution attributed to each segment is convolved with the probability density function (PDF) of motion during delivery of the segment, whereas in the conventional convolution method (''average-based convolution''), the static dose distribution is convolved with the PDF averaged over an entire fraction, an entire treatment course, or even an entire patient population. In the case of IMRT delivered in a step-and-shoot manner, the average-based convolution method assumes that in each segment the target volume experiences the same motion pattern (PDF) as that of population. In the segment-based convolution method, the dose during each segment is calculated by convolving the static dose with the motion PDF specific to that segment, allowing both intrafraction motion and the interplay effect to be accounted for in the dose calculation. Intrafraction prostate motion data from a population of 35 patients tracked using the Calypso system (Calypso Medical Technologies, Inc., Seattle, WA) was used to generate motion PDFs. These were then convolved with dose distributions from clinical prostate IMRT plans. For a single segment with a small number of monitor units, the interplay effect introduced errors of up to 25.9% in the mean CTV dose compared against the planned dose evaluated by using the PDF of the entire fraction. In contrast, the interplay effect reduced the minimum CTV dose by 4.4%, and the CTV generalized equivalent uniform dose by 1.3%, in single fraction plans. For entire treatment courses delivered in either a hypofractionated (five fractions) or conventional (>30 fractions) regimen, the discrepancy in total dose due to interplay effect was negligible

COMPARATIVE ANALYSIS OF THE METHODS FOR EVALUATING THE EFFECTIVE LENGTH OF COLUMNS

OpenAIRE

Paschal Chimeremeze Chiadighikaobi

2017-01-01

This article looks into the effective length of columns using different methods. The codes in use in this article are those from the AISC (American Institute of Steel Construction). And that of AS 4100 (Australian Steel code). A conclusion was drawn after investigating a frame using three different methods. Solved Exercise 6 (LeMessurier Method) was investigated using same frame but different dimension. Further analysis and investigation will be done using Java codes to analyze the frames.

Comparison of attitudes related with family planning methods before and after effective family planning counseling.

Directory of Open Access Journals (Sweden)

Esra Esim Büyükbayrak

2010-09-01

Full Text Available Objective: To evaluate the effect of family planning counseling on the changeover of the family planning method and to determine level of knowledge of participants on family planning methods and their attitude towards changeover of the method after counseling. Setting: Kartal education and reseach hospital obstetrics and gynecology clinic, department of family planning. Patients. 500 consecutive women applying to family planning department for any reason. Interventions: Effective family planning counseling service was given to each participant then a questioner containin 14 questions was applied with face to face technique. Main Outcome Measures: Attitude towards family planning counseling, comparison of the preference of family planning method before and after family planning counseling service and influential sociodemographic parameters on method choise were studied. Results: 45,2% of the participants were not taken family planning counseling service before. knowledge on family planning methods was sufficient in 25,2% of the participants, insufficient in 56,8% of the participants and 18% of the participants reported that they have no idea. 57,8% of the participants change mind about family planning counseling. 52,2% of the participants changeover perious method after counseling. 99,4% of the participants said that family planning counseling service should be given to every women. Preference of family planning method before and after family planning counseling service was statistically significantly different (p<0.01. Educational level, income and age were found to be influential sociodemographic factors for method preference. Conclusions: Effective family planning counseling service is found to have favorable effect on attitude and knowledge about family planning methods. Modern method usage increase as educational level and income of the participants increase.

Periodicity-induced effects and method in vibro-acoustics

DEFF Research Database (Denmark)

Sorokin, Sergey V.

2014-01-01

of the lecture is to illustrate these issues in simple examples and to discuss possible applications and generalisations. First, the eigenfrequency spectra of finite periodic structures are compared with the location of stop-bands for their infinite counterparts. This is done with the special attention being...... of the lecture is concerned with the numerical implementation of the Floquet theory and the experimental demonstration of periodicity effects. A brief exposition of the Wave Finite Element method and an assessment of its validity range in canonical benchmark problems are presented. The results of experimental...

Effective-field renormalization-group method for Ising systems

Science.gov (United States)

Fittipaldi, I. P.; De Albuquerque, D. F.

1992-02-01

A new applicable effective-field renormalization-group (ERFG) scheme for computing critical properties of Ising spins systems is proposed and used to study the phase diagrams of a quenched bond-mixed spin Ising model on square and Kagomé lattices. The present EFRG approach yields results which improves substantially on those obtained from standard mean-field renormalization-group (MFRG) method. In particular, it is shown that the EFRG scheme correctly distinguishes the geometry of the lattice structure even when working with the smallest possible clusters, namely N'=1 and N=2.

A Proposal of a Method to Measure and Evaluate the Effect to Apply External Support Measures for Owners by Construction Management Method, etc

Science.gov (United States)

Tada, Hiroshi; Miyatake, Ichiro; Mouri, Junji; Ajiki, Norihiko; Fueta, Toshiharu

In Japan, various approaches have been taken to ensure the quality of public works or to support the procurement regime of the governmental agencies, as a means to utilize external resources, which include the procurement support service or the construction management (CM) method. Although discussions on these measures to utilize external resources (hereinafter referred to as external support measure) have been going on, as well as the follow-up surveys showing the positive effects of such measures have been conducted, the surveys only deal with the matters concerning the overall effects of the external support measure on the whole, meaning that the effect of each item of the tasks have not been addressed, and that the extent it dealt with the expectations of the client is unknown. However, the effective use of the external support measure in future cannot be achieved without knowing what was the purpose to introduce the external support measure, and what effect was expected on each task item, and what extent the expectation fulfilled. Furthermore, it is important to clarify not only the effect as compared to the client's expectation (performance), but also the public benefit of this measure (value improvement). From this point of view, there is not an established method to figure out the effect of the client's measure to utilize external resources. In view of this background, this study takes the CM method as an example of the external support measure, and proposes a method to measure and evaluate the effect by each task item, and suggests the future issues and possible responses, in the aim of contributing the promotion, improvement, and proper implementation of the external support measures in future.

Effect of the absolute statistic on gene-sampling gene-set analysis methods.

Science.gov (United States)

Nam, Dougu

2017-06-01

Gene-set enrichment analysis and its modified versions have commonly been used for identifying altered functions or pathways in disease from microarray data. In particular, the simple gene-sampling gene-set analysis methods have been heavily used for datasets with only a few sample replicates. The biggest problem with this approach is the highly inflated false-positive rate. In this paper, the effect of absolute gene statistic on gene-sampling gene-set analysis methods is systematically investigated. Thus far, the absolute gene statistic has merely been regarded as a supplementary method for capturing the bidirectional changes in each gene set. Here, it is shown that incorporating the absolute gene statistic in gene-sampling gene-set analysis substantially reduces the false-positive rate and improves the overall discriminatory ability. Its effect was investigated by power, false-positive rate, and receiver operating curve for a number of simulated and real datasets. The performances of gene-set analysis methods in one-tailed (genome-wide association study) and two-tailed (gene expression data) tests were also compared and discussed.

Sparse feature learning for instrument identification: Effects of sampling and pooling methods.

Science.gov (United States)

Han, Yoonchang; Lee, Subin; Nam, Juhan; Lee, Kyogu

2016-05-01

Feature learning for music applications has recently received considerable attention from many researchers. This paper reports on the sparse feature learning algorithm for musical instrument identification, and in particular, focuses on the effects of the frame sampling techniques for dictionary learning and the pooling methods for feature aggregation. To this end, two frame sampling techniques are examined that are fixed and proportional random sampling. Furthermore, the effect of using onset frame was analyzed for both of proposed sampling methods. Regarding summarization of the feature activation, a standard deviation pooling method is used and compared with the commonly used max- and average-pooling techniques. Using more than 47 000 recordings of 24 instruments from various performers, playing styles, and dynamics, a number of tuning parameters are experimented including the analysis frame size, the dictionary size, and the type of frequency scaling as well as the different sampling and pooling methods. The results show that the combination of proportional sampling and standard deviation pooling achieve the best overall performance of 95.62% while the optimal parameter set varies among the instrument classes.

The Effect of TPR and Audio - Lingual Method in Teaching Vocabulary Viewed from Students’ IQ

Directory of Open Access Journals (Sweden)

Anita Dewi Ekawati

2017-01-01

Full Text Available This research aimed to investigate the effect of Total Physical Response (TPR on elementary school students’ English vocabulary mastery with regards to their Intelligence Quotient (IQ. Whether or not there is an interaction between the teaching method and IQ in teaching vocabulary was also investigated in this study . The research was carried out at an elementary school in Central Java , Indonesia . The population was the fifth year students of two classes. Both the experimental and control groups consisted of 40 students. The data were analyzed using multifactor analysis of variance 2 x 2 (ANOVA. Then, it was analyzed using Tukey test. The study reveals that TPR was an effective method for teaching vocabulary in elementary school, and the effectiveness of the method was influenced by the level of students’ IQ. The results of the study may become a reference for EFL teachers to apply an effective method to teach English vocabulary to elementary school students. Moreover, EFL teachers need to take into account students’ IQ in implementing the teaching method

The Effect of the Math Emporium Instructional Method on Students' Performance in College Algebra

Science.gov (United States)

Cousins-Cooper, Kathy; Staley, Katrina N.; Kim, Seongtae; Luke, Nicholas S.

2017-01-01

This study aims to investigate the effectiveness of the Emporium instructional method in a course of college algebra and trigonometry by comparing to the traditional lecture method. The math emporium method is a nontraditional instructional method of learning math that has been implemented at several universities with much success and has been…

Methods for teaching effective patient communication techniques to radiography students.

Science.gov (United States)

Makely, S

1990-07-01

Teaching students to communicate effectively with patients has always been part of the radiography curriculum in the USA. However, developing these skills has become even more important in recent times due to several factors. Patients who have been well versed in what to expect from the examination being conducted are in a better position to co-operate with the radiographer. This increases the chances of producing optimal results from an examination at the first attempt, thus reducing radiation exposure, patient discomfort and the overall cost of conducting the procedure. Also, increased competition among health care providers has resulted in more emphasis being placed on patient, or customer, satisfaction. Radiographers are in the 'front line' of patient care. Patients often have more interaction with radiographers than with physicians or other medical specialists. Radiographers who practise effective communication techniques with their patients can alleviate anxiety and make an important contribution to the overall satisfaction of the patient with respect to the quality of service and care they receive. This article describes instructional methods being used in the USA to help develop effective patient communication techniques, and reports the findings of a study among radiography educators as to which of these methods are thought to be most successful.

NEW MEAT PRODUCTS WITH IMMUNOMODULATORY EFFECT CREATION METHOD

Directory of Open Access Journals (Sweden)

I. V. Kaltovich

2016-01-01

Full Text Available New meat products with immunomodulatory effect creation method reflecting differential characteristics of technological stages of manufacture of those types of meat products, including issues on the selection of primary and secondary raw materials, guidelines for development of formulations and production technologies, legislative requirements towards its labeling, etc, has been developed for the first time. A list of prospective meat raw materials for the manufacture of products with immunomodulatory effect was established: beef, pork, rabbit meat, broiler chicken meat, turkey, veal, ostrich meat, which have high content of protein (14,3– 21,7%, low content of fat (1,2–16,1%, excluding pork (33,3%, high levels of minimum amino-acid score (90,0–104,0%, protein quality indicator(0,91–1,64, essential amino acid index (1,16-1,25, coefficient of utility of amino acid content (0,72–0,86 and close to optimum fatty acid content, and also contain a great number of vitamins and minerals which play a significant role for immunity improvement. It was determined that the following functional ingredients are recommended to use: amino acids (valine, leucine, isoleucine, methionine, threonine, arginine, tryptophan, lysine, histidin, phenylalanyl, vitamins and provitamins (C,E, beta-carotene, B vitamins(Bc, B12, PP, etc., P(bioflavonoid complex, H, K, minerals (calcium, magnesium, iron, cuprum, zinc, manganese, selenium, polyunsaturated fatty acids omega-3 and omega-6, pseudo-vitamins (L-carnitin, coenzyme Q10, polysaccharides and peptides naturally occurring(squalen, B-Carotene, ginger, shiitake mushrooms, probiotics and prebiotics, glutathione, indole and lycopienes, bioflavonoids, L-arginine, N-acetylcysteine, gel from seaweed «Lamifaren». The use of the developed meat products with immunomodulatory effect creation method by process engineers of meat processing factories will allow them to form a single scientifically grounded approach during the

The ORC method. Effective modelling of thermal performance of multilayer building components

Energy Technology Data Exchange (ETDEWEB)

Akander, Jan

2000-02-01

The ORC Method (Optimised RC-networks) provides a means of modelling one- or multidimensional heat transfer in building components, in this context within building simulation environments. The methodology is shown, primarily applied to heat transfer in multilayer building components. For multilayer building components, the analytical thermal performance is known, given layer thickness and material properties. The aim of the ORC Method is to optimise the values of the thermal resistances and heat capacities of an RC-model such as to give model performance a good agreement with the analytical performance, for a wide range of frequencies. The optimisation procedure is made in the frequency domain, where the over-all deviation between model and analytical frequency response, in terms of admittance and dynamic transmittance, is minimised. It is shown that ORC's are effective in terms of accuracy and computational time in comparison to finite difference models when used in building simulations, in this case with IDA/ICE. An ORC configuration of five mass nodes has been found to model building components in Nordic countries well, within the application of thermal comfort and energy requirement simulations. Simple RC-networks, such as the surface heat capacity and the simple R-C-configuration are not appropriate for detailed building simulation. However, these can be used as basis for defining the effective heat capacity of a building component. An approximate method is suggested on how to determine the effective heat capacity without the use of complex numbers. This entity can be calculated on basis of layer thickness and material properties with the help of two time constants. The approximate method can give inaccuracies corresponding to 20%. In-situ measurements have been carried out in an experimental building with the purpose of establishing the effective heat capacity of external building components that are subjected to normal thermal conditions. The auxiliary

Cost effectiveness of recruitment methods in an obesity prevention trial for young children.

Science.gov (United States)

Robinson, Jodie L; Fuerch, Janene H; Winiewicz, Dana D; Salvy, Sarah J; Roemmich, James N; Epstein, Leonard H

2007-06-01

Recruitment of participants for clinical trials requires considerable effort and cost. There is no research on the cost effectiveness of recruitment methods for an obesity prevention trial of young children. This study determined the cost effectiveness of recruiting 70 families with a child aged 4 to 7 (5.9+/-1.3) years in Western New York from February 2003 to November 2004, for a 2-year randomized obesity prevention trial to reduce television watching in the home. Of the 70 randomized families, 65.7% (n=46) were obtained through direct mailings, 24.3% (n=17) were acquired through newspaper advertisements, 7.1% (n=5) from other sources (e.g., word of mouth), and 2.9% (n=2) through posters and brochures. Costs of each recruitment method were computed by adding the cost of materials, staff time, and media expenses. Cost effectiveness (money spent per randomized participant) was US $0 for other sources, US $227.76 for direct mailing, US $546.95 for newspaper ads, and US $3,020.84 for posters and brochures. Of the methods with associated costs, direct mailing was the most cost effective in recruiting families with young children, which supports the growing literature of the effectiveness of direct mailing.

Effect of integration of cultural, botanical, and chemical methods of ...

African Journals Online (AJOL)

A field experiment was conducted from November 2011 to June 2013 to evaluate the effects of botanical, cultural, and chemical methods on termite colony survival, crop and wooden damage, and other biological activities in Ghimbi district of western Ethiopia. The termite mounds were dug and the following treatments were ...

Effects of application methods and species of wood on color ...

African Journals Online (AJOL)

In this study, the color effects of wood materials to coloring with different application methods (brush, roller sponge and spray gun) and waterborne varnishes were investigated according to ASTM-D 2244. For this purpose, the experimental samples of Scots pine (Pinus silvestris L.), oriental beech (Fagus orientalis L.) and ...

COMPARATIVE ANALYSIS OF THE METHODS FOR EVALUATING THE EFFECTIVE LENGTH OF COLUMNS

Directory of Open Access Journals (Sweden)

Paschal Chimeremeze Chiadighikaobi

2017-08-01

Full Text Available This article looks into the effective length of columns using different methods. The codes in use in this article are those from the AISC (American Institute of Steel Construction. And that of AS 4100 (Australian Steel code. A conclusion was drawn after investigating a frame using three different methods. Solved Exercise 6 (LeMessurier Method was investigated using same frame but different dimension. Further analysis and investigation will be done using Java codes to analyze the frames.

Effects of slurry application methods on soil faunal communities in permanent grassland

NARCIS (Netherlands)

Vliet, van P.C.J.; Goede, de R.G.M.

2006-01-01

We studied the effects of two slurry manure application methods, broadcasting manure slurry (MB) and manure slit injection (SMI), on soil faunal communities 1 week and 4 or 5 weeks after application in the spring of 2002 and the summer of 2003. No effect on total numbers of Enchytraeidae and

Effectiveness of different tutorial recitation teaching methods and its implications for TA training

Science.gov (United States)

Endorf, Robert

2008-04-01

We present results from a comparative study of student understanding for students who attended recitation classes that used different teaching methods. The purpose of the study was to evaluate which teaching methods would be the most effective for recitation classes associated with large lectures in introductory physics courses. Student volunteers from our introductory calculus-based physics course at the University of Cincinnati attended a special recitation class that was taught using one of four different teaching methods. A total of 272 students were divided into approximately equal groups for each method. Students in each class were taught the same topic, ``Changes in Energy and Momentum,'' from ``Tutorials in Introductory Physics'' by Lillian McDermott, Peter Shaffer and the Physics Education Group at the University of Washington. The different teaching methods varied in the amount of student and teacher engagement. Student understanding was evaluated through pretests and posttests. Our results demonstrate the importance of the instructor's role in teaching recitation classes. The most effective teaching method was for students working in cooperative learning groups with the instructors questioning the groups using Socratic dialogue. In addition, we investigated student preferences of modes of instruction through an open-ended survey. Our results provide guidance and evidence for the teaching methods which should be emphasized in training course instructors.

Effect of Drying Method and Variety on Quality of Cassava Starch ...

African Journals Online (AJOL)

Effect of Drying Method and Variety on Quality of Cassava Starch Extracts. ... Cassava starch is one of the main industrial products of cassava processing. ... Also, cassava starch samples dried at lower temperature have better functional and ...

Using the QUAIT Model to Effectively Teach Research Methods Curriculum to Master's-Level Students

Science.gov (United States)

Hamilton, Nancy J.; Gitchel, Dent

2017-01-01

Purpose: To apply Slavin's model of effective instruction to teaching research methods to master's-level students. Methods: Barriers to the scientist-practitioner model (student research experience, confidence, and utility value pertaining to research methods as well as faculty research and pedagogical incompetencies) are discussed. Results: The…

Effect of Heat Generation of Ultrasound Transducer on Ultrasonic Power Measured by Calorimetric Method

Science.gov (United States)

Uchida, Takeyoshi; Kikuchi, Tsuneo

2013-07-01

Ultrasonic power is one of the key quantities closely related to the safety of medical ultrasonic equipment. An ultrasonic power standard is required for establishment of safety. Generally, an ultrasonic power standard below approximately 20 W is established by the radiation force balance (RFB) method as the most accurate measurement method. However, RFB is not suitable for high ultrasonic power because of thermal damage to the absorbing target. Consequently, an alternative method to RFB is required. We have been developing a measurement technique for high ultrasonic power by the calorimetric method. In this study, we examined the effect of heat generation of an ultrasound transducer on ultrasonic power measured by the calorimetric method. As a result, an excessively high ultrasonic power was measured owing to the effect of heat generation from internal loss in the transducer. A reference ultrasound transducer with low heat generation is required for a high ultrasonic power standard established by the calorimetric method.

[Effect of Parasep® feces centrifuge tube method on detecting schistosome eggs].

Science.gov (United States)

Ma, Nian; Zhang, Hua-ming; Liu, Xiong; Xiao, Chuan-yun; Wen, Xiao-hong; Li, Xia; Dong, Li-chun; Cui, Cai-xia; Tu, Zu-wu

2014-08-01

To evaluate the effect of the Parasep® feces centrifuge tube method on detecting schistosome eggs. A total of 803 residents aged from 6-65 years were selected in 2 schistosomiasis endemic villages, Jiangling County, Hubei Province, and their stool samples were collected and detected parallelly by the Kato-Katz technique, nylon silk egg hatching method, and Parasep® feces centrifuge tube method at the same time. Among the 803 people, 15 cases were found of schistosome egg positive, and the positive rate was 1.87%. The positive rates of the Kato-Katz technique, nylon silk egg hatching method, and Parasep® feces centrifuge tube method were 0.75%, 1.49% and 1.12%, respectively. The schistosome eggs got with the Parasep® feces centrifuge tube method were clear and easy to identify. In low endemic areas of schistosomiasis, the Parasep® feces centrifuge tube method can be used as schistosomiasis japonica etiology diagnosis method.

Effects of drying methods of lamellas used in multilayer parquet ...

African Journals Online (AJOL)

Flat sawn green lamellas with 5 and 2 mm thicknesses, which were cut away from Iroko lumber by means of thin cutting frame saw, were dried with 3 different drying methods such as drying in lumber drying kiln, jet ventilated automatic veneer roller dryer and veneer press dryer. Effect of drying temperature on surface ...

Using Pyramids Effects as a method of nuclear and radiation protection

International Nuclear Information System (INIS)

Abdullayev, I.E.

2011-01-01

Results most of experiments fixed that When radioactive waste is placed inside the pyramids, there is a decrease in their level of radioactivity Based on result of these experiments we suggest - Using Pyramids Effects as a method of nuclear and radiation protection. Explanation of this method based on 3 factors. (2 of them - internal factors, 1 of them - external factor) Factor I. Based o the Theory of the Pyramids Effects we know, that Pyramid construction separate the normal geomagnetic field of the Earth to 2 parts, which have difference vise verse physical characteristics. Cause of the energetic barrier of side of Pyramid, internal space of the Pyramid isolate from the influence of the external normal geomagnetic field of Earth. Therefore, internal space of the Pyramid is fulfilling only by the attractive power of the Earth (pic.1)

ξ common cause failure model and method for defense effectiveness estimation

International Nuclear Information System (INIS)

Li Zhaohuan

1991-08-01

Two issues have been dealt. One is to develop an event based parametric model called ξ-CCF model. Its parameters are expressed in the fraction of the progressive multiplicities of failure events. By these expressions, the contribution of each multiple failure can be presented more clearly. It can help to select defense tactics against common cause failures. The other is to provide a method which is based on the operational experience and engineering judgement to estimate the effectiveness of defense tactics. It is expressed in terms of reduction matrix for a given tactics on a specific plant in the event by event form. The application of practical example shows that the model in cooperation with the method can simply estimate the effectiveness of defense tactics. It can be easily used by the operators and its application may be extended

The effect of Pilates method on elderly flexibility

Directory of Open Access Journals (Sweden)

Adriana Coutinho de Azevedo Guimarães

Full Text Available Introduction Pilates as physical exercise practice brings countless benefits, such as improvement of motor aptitudes and skills.Objective To look into the effect of the Pilates method on the hip and shoulder girdle flexibility levels in the elderly.Methods Experimental study composed of 30 elderly subjects of the control group and 30 of the Pilates group within a 12 week training time. A form was used to characterize the sample and to assess hip flexibility and shoulder girdle. Descriptive and inferential statistics were used, under a significance level of p < 0.05.Results On hip flexibility, the 30 elderly individuals from the control group remained under normal and inferior classification, not presenting any differences between the variables (p = 0.180 from the pretest to the retest. In the intervention group, 60% of the elderly subjects were assessed as normal. In the retest, such percentage increased to 66.7%. In the pretest, 10% of the elderly subjects were given the superior classification, and in the retest, it increased to 33%, not presenting significance between the variables (p = 0.180. On shoulder flexibility in the intervention group, 63% of the elderly subjects were graded as normal, and 17% as superior. In the shoulder retest the number of elderly individuals decreased to 47% in the normal classification, and increased to 33% in the superior classification, presenting a significant difference (p = 0.001.Conclusion The elderly subjects who did not take part into the Pilates method presented a lower flexibility degree, considering that, the latter reduces in aging. As a preventive way of improving such limitation, the practice of the Pilates method is suggested.

Comparative effectiveness of instructional methods: oral and pharyngeal cancer examination.

Science.gov (United States)

Clark, Nereyda P; Marks, John G; Sandow, Pamela R; Seleski, Christine E; Logan, Henrietta L

2014-04-01

This study compared the effectiveness of different methods of instruction for the oral and pharyngeal cancer examination. A group of thirty sophomore students at the University of Florida College of Dentistry were randomly assigned to three training groups: video instruction, a faculty-led hands-on instruction, or both video and hands-on instruction. The training intervention involved attending two sessions spaced two weeks apart. The first session used a pretest to assess students' baseline didactic knowledge and clinical examination technique. The second session utilized two posttests to assess the comparative effectiveness of the training methods on didactic knowledge and clinical technique. The key findings were that students performed the clinical examination significantly better with the combination of video and faculty-led hands-on instruction (p<0.01). All students improved their clinical exam skills, knowledge, and confidence in performing the oral and pharyngeal cancer examination independent of which training group they were assigned. Utilizing both video and interactive practice promoted greater performance of the clinical technique on the oral and pharyngeal cancer examination.

Epidemiological methods for assessing dose-response and dose-effect relationships

DEFF Research Database (Denmark)

Kjellström, Tord; Grandjean, Philippe

2007-01-01

Selected Molecular Mechanisms of Metal Toxicity and Carcinogenicity General Considerations of Dose-Effect and Dose-Response Relationships Interactions in Metal Toxicology Epidemiological Methods for Assessing Dose-Response and Dose-Effect Relationships Essential Metals: Assessing Risks from Deficiency......Description Handbook of the Toxicology of Metals is the standard reference work for physicians, toxicologists and engineers in the field of environmental and occupational health. This new edition is a comprehensive review of the effects on biological systems from metallic elements...... access to a broad range of basic toxicological data and also gives a general introduction to the toxicology of metallic compounds. Audience Toxicologists, physicians, and engineers in the fields of environmental and occupational health as well as libraries in these disciplines. Will also be a useful...

Effect of comminution method and raw binder system in restructured beef.

Science.gov (United States)

Boles, J A; Shand, P J

1998-07-01

The effect of particle size, method of particle size reduction (grinding, flaking, slicing) and alginate or Fibrimex(™) binding systems on processing properties of restructured beef were investigated. The size of semimembranosus muscles was reduced with a meat slicer, grinder or flaker (Comitrol) through machine openings that were 2, 4 and 8 mm in size. Bind of meat pieces in raw and cooked beef steakettes were measured. Sensory evaluation to determine the effect of method of size reduction on texture of beef steakettes was done only on steakettes manufactured with alginate. Beef steakettes manufactured with the alginate binding system had significantly (p meat for the manufacture of restructured beef steakettes resulted in a higher raw bind than did either grinding or flaking the meat. Significant (p meat was sliced than when it was ground or flaked. However, when Fibrimex was used, bind was stronger when sliced meat was used. The alginate system resulted in higher binds for cooked product when particle size was smaller but with the Fibrimex system bind was higher when particle sizes were larger. A consumer panel on alginate restructured steakettes showed no preference for the texture produced by the different methods of particle size reduction.

Comparing interactive videodisc training effectiveness to traditional training methods

International Nuclear Information System (INIS)

Kenworthy, N.W.

1987-01-01

Videodisc skills training programs developed by Industrial Training Corporation are being used and evaluated by major industrial facilities. In one such study, interactive videodisc training programs were compared to videotape and instructor-based training to determine the effectiveness of videodisc in terms of performance, training time and trainee attitudes. Results showed that when initial training was done using the interactive videodisc system, trainee performance was superior to the performance of trainees using videotape, and approximately equal to the performance of those trained by an instructor. When each method was used in follow-up training, interactive videodisc was definitely the most effective. Results also indicate that training time can be reduced using interactive videodisc. Attitudes of both trainees and instructors toward the interactive videodisc training were positive

Failure Mode and Effect Analysis using Soft Set Theory and COPRAS Method

Directory of Open Access Journals (Sweden)

Ze-Ling Wang

2017-01-01

Full Text Available Failure mode and effect analysis (FMEA is a risk management technique frequently applied to enhance the system performance and safety. In recent years, many researchers have shown an intense interest in improving FMEA due to inherent weaknesses associated with the classical risk priority number (RPN method. In this study, we develop a new risk ranking model for FMEA based on soft set theory and COPRAS method, which can deal with the limitations and enhance the performance of the conventional FMEA. First, trapezoidal fuzzy soft set is adopted to manage FMEA team membersr linguistic assessments on failure modes. Then, a modified COPRAS method is utilized for determining the ranking order of the failure modes recognized in FMEA. Especially, we treat the risk factors as interdependent and employ the Choquet integral to obtain the aggregate risk of failures in the new FMEA approach. Finally, a practical FMEA problem is analyzed via the proposed approach to demonstrate its applicability and effectiveness. The result shows that the FMEA model developed in this study outperforms the traditional RPN method and provides a more reasonable risk assessment of failure modes.

Method of compensation spires for the detection of the diamagnetic effect in a Tokamak

International Nuclear Information System (INIS)

Colunga S, S.

1990-09-01

In this report the classical detection method of the diamagnetic effect by means of a rolled spire on the discharges chamber in the poloidal direction and the difficulties related with this are analyzed. An alternative method that increases considerably the detection sensibility of the diamagnetic effect and that for its simplicity it is quite attractive for its application to the Tokamak Novillo of the ININ is presented. (Author)

Is the implementation of quality improvement methods in hospitals subject to the neighbourhood effect?

Science.gov (United States)

Yu, Tsung-Hsien; Chung, Kuo-Piao

2014-06-01

Quality improvement (QI) methods have been fashionable in hospitals for decades. Previous studies have discussed the relationships between the implementation of QI methods and various external and internal factors, but there has been no examination to date of whether the neighbourhood effect influences such implementation. The aim of this study was to use a multilevel model to investigate whether and how the neighbourhood effect influences the implementation of QI methods in the hospital setting in Taiwan. This is a retrospective questionnaire-based survey. All medical centres, regional hospitals and district teaching hospitals in Taiwan. Directors or persons in charge of implementing QI methods in hospitals. None. The breadth and depth of QI method implementation. Seventy-two of the 139 hospitals contacted returned the questionnaire, yielding a 52% response rate. The breadth and depth of QI method implementation increased over the 10-year study period, particularly between 2004 and 2006. The breadth and depth of the QI methods implemented in the participating hospitals were significantly associated with the average breadth and depth of those implemented by their competitors in the same medical area during the previous period. In addition, time was positively associated with the breadth and depth of QI method implementation. In summary, the findings of this study show that hospitals' QI implementation status is influenced by that of their neighbours. Hence, the neighbourhood effect is an important factor in understanding hospital behaviour. © The Author 2014. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Highly Efficient Spin-Current Operation in a Cu Nano-Ring

Science.gov (United States)

Murphy, Benedict A.; Vick, Andrew J.; Samiepour, Marjan; Hirohata, Atsufumi

2016-11-01

An all-metal lateral spin-valve structure has been fabricated with a medial Copper nano-ring to split the diffusive spin-current path. We have demonstrated significant modulation of the non-local signal by the application of a magnetic field gradient across the nano-ring, which is up to 30% more efficient than the conventional Hanle configuration at room temperature. This was achieved by passing a dc current through a current-carrying bar to provide a locally induced Ampère field. We have shown that in this manner a lateral spin-valve gains an additional functionality in the form of three-terminal gate operation for future spintronic logic.

Spin diffusion in bulk GaN measured with MnAs spin injector

KAUST Repository

Jahangir, Shafat; Dogan, Fatih; Kum, Hyun; Manchon, Aurelien; Bhattacharya, Pallab

2012-01-01

Spin injection and precession in bulk wurtzite n-GaN with different doping densities are demonstrated with a ferromagnetic MnAs contact using the three-terminal Hanle measurement technique. Theoretical analysis using minimum fitting parameters indicates that the spin accumulation is primarily in the n-GaN channel rather than at the ferromagnet (FM)/semiconductor (SC) interface states. Spin relaxation in GaN is interpreted in terms of the D’yakonov-Perel mechanism, yielding a maximum spin lifetime of 44 ps and a spin diffusion length of 175 nm at room temperature. Our results indicate that epitaxial ferromagnetic MnAs is a suitable high-temperature spin injector for GaN.

Spin diffusion in bulk GaN measured with MnAs spin injector

KAUST Repository

Jahangir, Shafat

2012-07-16

Spin injection and precession in bulk wurtzite n-GaN with different doping densities are demonstrated with a ferromagnetic MnAs contact using the three-terminal Hanle measurement technique. Theoretical analysis using minimum fitting parameters indicates that the spin accumulation is primarily in the n-GaN channel rather than at the ferromagnet (FM)/semiconductor (SC) interface states. Spin relaxation in GaN is interpreted in terms of the D’yakonov-Perel mechanism, yielding a maximum spin lifetime of 44 ps and a spin diffusion length of 175 nm at room temperature. Our results indicate that epitaxial ferromagnetic MnAs is a suitable high-temperature spin injector for GaN.

Burnout in dental students: effectiveness of different methods

Directory of Open Access Journals (Sweden)

Juliana Alvares Duarte Bonini Campos

Full Text Available OBJECTIVE: This study was proposed to estimate the effectiveness of different screening methods of the Burnout Syndrome among dental students. MATERIAL AND METHOD: The Burnout Syndrome assessment was performed using the Oldenburg Inventory-Student survey (OLBI-SS and the Copenhagen Inventory-Student survey (CBI‑SS. The Maslach Burnout Inventory-Student survey (MBI-SS was used as the gold standard. The psychometric properties of the instruments were measured. The second-order hierarchical model was estimated to calculate the overall scores for OLBI-SS and CBI-SS, and ROC curves were constructed and the areas were estimated (AUROC. RESULT: A total of 235 undergraduate students participated in this study. The instruments showed an adequate reliability and validity; however three questions had to be removed from OLBI-SS and one from CBI-SS. The Exhaustion dimension of OLBI-SS, and Personal Burnout and Study related Burnout of CBI-SS presented a good discriminating capacity. CONCLUSION: CBI-SS showed higher discriminating capacity, than OLBI-SS, to identify the Burnout Syndrome (DAUROC=.172 [.103-.240]; p<.05.

Derivation of effectiveness-NTU method for heat exchangers with heat leak; TOPICAL

International Nuclear Information System (INIS)

William M. Soyars

2001-01-01

A powerful and useful method for heat exchanger analysis is the effectiveness-NTU method. The equations for this technique presented in textbooks, however, are limited to the case where all of the heat transfer occurs between the two fluid streams. In an application of interest to us, cryogenic heat exchangers, we wish to consider a heat leak term. Thus, we have derived equations for the(var e psilon)-NTU method with heat leak involved. The cases to be studied include evaporators, condensers, and counter-flow, with heat leak both in and out

Logistic Regression with Multiple Random Effects: A Simulation Study of Estimation Methods and Statistical Packages.

Science.gov (United States)

Kim, Yoonsang; Choi, Young-Ku; Emery, Sherry

2013-08-01

Several statistical packages are capable of estimating generalized linear mixed models and these packages provide one or more of three estimation methods: penalized quasi-likelihood, Laplace, and Gauss-Hermite. Many studies have investigated these methods' performance for the mixed-effects logistic regression model. However, the authors focused on models with one or two random effects and assumed a simple covariance structure between them, which may not be realistic. When there are multiple correlated random effects in a model, the computation becomes intensive, and often an algorithm fails to converge. Moreover, in our analysis of smoking status and exposure to anti-tobacco advertisements, we have observed that when a model included multiple random effects, parameter estimates varied considerably from one statistical package to another even when using the same estimation method. This article presents a comprehensive review of the advantages and disadvantages of each estimation method. In addition, we compare the performances of the three methods across statistical packages via simulation, which involves two- and three-level logistic regression models with at least three correlated random effects. We apply our findings to a real dataset. Our results suggest that two packages-SAS GLIMMIX Laplace and SuperMix Gaussian quadrature-perform well in terms of accuracy, precision, convergence rates, and computing speed. We also discuss the strengths and weaknesses of the two packages in regard to sample sizes.

Evaluating the effectiveness of behavior change techniques in health-related behavior: a scoping review of methods used.

Science.gov (United States)

Michie, Susan; West, Robert; Sheals, Kate; Godinho, Cristina A

2018-03-01

Behavior change interventions typically contain multiple potentially active components: behavior change techniques (BCTs). Identifying which specific BCTs or BCT combinations have the potential to be effective for a given behavior in a given context presents a major challenge. The aim of this study was to review the methods that have been used to identify effective BCTs for given behaviors in given contexts and evaluate their strengths and limitations. A scoping review was conducted of studies that had sought to identify effective BCTs. Articles referring to "behavio(u)r change technique(s)" in the abstract/text were located, and ones that involved identification of effective BCTs were selected. The methods reported were coded. The methods were analyzed in general terms using "PASS" criteria: Practicability (facility to apply the method appropriately), Applicability (facility to generalize from findings to contexts and populations of interest), Sensitivity (facility to identify effective BCTs), and Specificity (facility to rule out ineffective BCTs). A sample of 10% of the studies reviewed was then evaluated using these criteria to assess how far the strengths and limitations identified in principle were borne out in practice. One hundred and thirty-five studies were identified. The methods used in those studies were experimental manipulation of BCTs, observational studies comparing outcomes in the presence or absence of BCTs, meta-analyses of BCT comparisons, meta-regressions evaluating effect sizes with and without specific BCTs, reviews of BCTs found in effective interventions, and meta-classification and regression trees. The limitations of each method meant that only weak conclusions could be drawn regarding the effectiveness of specific BCTs or BCT combinations. Methods for identifying effective BCTs linked to target behavior and context all have important inherent limitations. A strategy needs to be developed that can systematically combine the strengths of

Hydrajet fracturing: an effective method for placing many fractures in openhole horizontal wells

Energy Technology Data Exchange (ETDEWEB)

Surjaatmadja, J. B.; Grundmann, S. R.; McDaniel, B.; Deeg, W. F. J.; Brumley, J. L.; Swor, L. C.

1998-12-31

A new method for openhole horizontal well fracturing that combines hydrajetting and fracturing techniques, which was developed on the basis of Bernoulli`s theorem, is described. This theorem has been effectively proven in many applications such as jet pumps, additive injection systems and jet aircraft engines. By using this method, operators can position a jetting tool, without the use of sealing elements, at the exact point where fracture is required. The method also permits the use of multiple fractures in the same well, which can be spaced evenly or unevenly as prescribed by the fracturing program. Damage can be avoided by placing hundreds of small fractures in a long horizontal section, or operators can use acid and/or propped sand techniques to place a combination of two fracture types in the well. The paper describes the basic principles of horizontal hydrajet fracturing, and elements of a laboratory model which was developed to demonstrate the effectiveness of the method.

Mapping enzymatic catalysis using the effective fragment molecular orbital method

DEFF Research Database (Denmark)

Svendsen, Casper Steinmann; Fedorov, Dmitri G.; Jensen, Jan Halborg

2013-01-01

We extend the Effective Fragment Molecular Orbital (EFMO) method to the frozen domain approach where only the geometry of an active part is optimized, while the many-body polarization effects are considered for the whole system. The new approach efficiently mapped out the entire reaction path...... of chorismate mutase in less than four days using 80 cores on 20 nodes, where the whole system containing 2398 atoms is treated in the ab initio fashion without using any force fields. The reaction path is constructed automatically with the only assumption of defining the reaction coordinate a priori. We...

Effect of defuzzification method of fuzzy modeling

Science.gov (United States)

Lapohos, Tibor; Buchal, Ralph O.

1994-10-01

Imprecision can arise in fuzzy relational modeling as a result of fuzzification, inference and defuzzification. These three sources of imprecision are difficult to separate. We have determined through numerical studies that an important source of imprecision is the defuzzification stage. This imprecision adversely affects the quality of the model output. The most widely used defuzzification algorithm is known by the name of `center of area' (COA) or `center of gravity' (COG). In this paper, we show that this algorithm not only maps the near limit values of the variables improperly but also introduces errors for middle domain values of the same variables. Furthermore, the behavior of this algorithm is a function of the shape of the reference sets. We compare the COA method to the weighted average of cluster centers (WACC) procedure in which the transformation is carried out based on the values of the cluster centers belonging to each of the reference membership functions instead of using the functions themselves. We show that this procedure is more effective and computationally much faster than the COA. The method is tested for a family of reference sets satisfying certain constraints, that is, for any support value the sum of reference membership function values equals one and the peak values of the two marginal membership functions project to the boundaries of the universe of discourse. For all the member sets of this family of reference sets the defuzzification errors do not get bigger as the linguistic variables tend to their extreme values. In addition, the more reference sets that are defined for a certain linguistic variable, the less the average defuzzification error becomes. In case of triangle shaped reference sets there is no defuzzification error at all. Finally, an alternative solution is provided that improves the performance of the COA method.

Empirical method for matrix effects correction in liquid samples

International Nuclear Information System (INIS)

Vigoda de Leyt, Dora; Vazquez, Cristina

1987-01-01

A simple method for the determination of Cr, Ni and Mo in stainless steels is presented. In order to minimize the matrix effects, the conditions of liquid system to dissolve stainless steels chips has been developed. Pure element solutions were used as standards. Preparation of synthetic solutions with all the elements of steel and also mathematic corrections are avoided. It results in a simple chemical operation which simplifies the method of analysis. The variance analysis of the results obtained with steel samples show that the three elements may be determined from the comparison with the analytical curves obtained with the pure elements if the same parameters in the calibration curves are used. The accuracy and the precision were checked against other techniques using the British Chemical Standards of the Bureau of Anlysed Samples Ltd. (England). (M.E.L.) [es

EFFECT OF COOKING METHODS ON AMINO ACIDS COMPOSITION OF CHICKEN MEAT

OpenAIRE

Thanaa Shehab

2016-01-01

Chicken meat is an important item in the Syrian diet. The increasing production of chickens and their potential in restaurants and food service operation implies the need for more detailed information regarding their quality and nutrient retention. Cooking methods have different effects on the values of nutrients of chicken. Therefore, this study was carried out to evaluate the effect of microwave cooking in amino acids composition of chicken meat (breast &thigh) as compared with some con...

Calculation methods' comparative analysis of monorail hoist crane local bending effects

Directory of Open Access Journals (Sweden)

Cvijović Goran M.

2016-01-01

Full Text Available The results of numerical and experimental researches of local bending problems, carried on classic and medium-wide I profiles, were a basis for the adoption of the current standards (EN 15011: 2014 which regulates the action of the local stress caused by the effect of cart wheels. Regarding the fact that IPB (HE-B wide flange profiles are largely used for production of the main carriers of monorail transport systems, this paper presents the results of the action of the local stress caused by the effect of cart wheels on the HE-A flange profile, using the methods and procedures of relevant researchers, the procedures prescribed by the standard EN 15011 as well as the results of calculations using finite element method. It has been revealed, based on comparative analysis of the results, that in the transition zone low flange / rib longitudinal local stress on the lower contour flange, determined using the above mentioned standards have tightening characteristic, while all other methods, including finite element method, give the pressing nature of the considered voltage. In addition, all of these procedures, except for the finite element method, adopt the assumption that absolute value of voltage, caused by local bending on upper and lower contour of the loaded flange, are the same, and there is no physical justification. Bearing in mind the fact that stress identification, caused by the flange local bending, is an extremely important phase proving the strength of monorail beams, we may conclude that the application of standard EN 15011 does not provide reliable results when it comes to wide flange profiles.

Work stress interventions in hospital care : Effectiveness of the DISCovery method

NARCIS (Netherlands)

Niks, I.M.W.; de Jonge, J.; Gevers, J.M.P.; Houtman, I.L.D.

2018-01-01

Effective interventions to prevent work stress and to improve health, well-being, and performance of employees are of the utmost importance. This quasi-experimental intervention study presents a specific method for diagnosis of psychosocial risk factors at work and subsequent development and

Work Stress Interventions in Hospital Care: Effectiveness of the DISCovery Method

NARCIS (Netherlands)

Niks, I.M.W.; Gevers, J.M.P.; Jonge, J. de; Houtman, I.L.D.

2018-01-01

Effective interventions to prevent work stress and to improve health, well-being, and performance of employees are of the utmost importance. This quasi-experimental intervention study presents a specific method for diagnosis of psychosocial risk factors at work and subsequent development and

Lessons from comparative effectiveness research methods development projects funded under the Recovery Act.

Science.gov (United States)

Zurovac, Jelena; Esposito, Dominick

2014-11-01

The American Recovery and Reinvestment Act of 2009 (ARRA) directed nearly US$29.2 million to comparative effectiveness research (CER) methods development. To help inform future CER methods investments, we describe the ARRA CER methods projects, identify barriers to this research and discuss the alignment of topics with published methods development priorities. We used several existing resources and held discussions with ARRA CER methods investigators. Although funded projects explored many identified priority topics, investigators noted that much work remains. For example, given the considerable investments in CER data infrastructure, the methods development field can benefit from additional efforts to educate researchers about the availability of new data sources and about how best to apply methods to match their research questions and data.

Effective Methods of Nuclear Power Technology Transfer

International Nuclear Information System (INIS)

Shave, D. F.; Kent, G. F.; Giambusso, A.

1987-01-01

An effective technology transfer program is a necessary and significant step towards independence in nuclear power technology. Attaining success in the conduct of such a program is a result of a) the donor and recipient jointly understanding the fundamental concepts of the learning process, b) sharing a mutual philosophy involving a partnership relationship, c) joint and careful planning, d) rigorous adherence to proven project management techniques, and e) presence of adequate feedback to assure continuing success as the program proceeds. Several years ago, KEPCO President Park, Jung-KI presented a paper on technology in which he stated, 'Nuclear technology is an integration of many unit disciplines, and thus requires extensive investment and training in order to establish the base for efficient absorption of transferred technology.' This paper addresses President Park's observations by discussing the philosophy, approach, and mechanisms that are necessary to support an efficient and effective process of nuclear power technology transfer. All technical content and presentation methods discussed are based on a technology transfer program developed by Stone and Webster, as an Engineer/Constructor for nuclear power plants, and are designed and implemented to promote the primary program goal - the ability of the trainees and the organization to perform specific nuclear power related multi-discipline function independently and competitively

Future space missions and ground observatory for measurements of coronal magnetic fields

Science.gov (United States)

Fineschi, Silvano; Gibson, Sarah; Bemporad, Alessandro; Zhukov, Andrei; Damé, Luc; Susino, Roberto; Larruquert, Juan

2016-07-01

This presentation gives an overview of the near-future perspectives for probing coronal magnetism from space missions (i.e., SCORE and ASPIICS) and ground-based observatory (ESCAPE). Spectro-polarimetric imaging of coronal emission-lines in the visible-light wavelength-band provides an important diagnostics tool of the coronal magnetism. The interpretation in terms of Hanle and Zeeman effect of the line-polarization in forbidden emission-lines yields information on the direction and strength of the coronal magnetic field. As study case, this presentation will describe the Torino Coronal Magnetograph (CorMag) for the spectro-polarimetric observation of the FeXIV, 530.3 nm, forbidden emission-line. CorMag - consisting of a Liquid Crystal (LC) Lyot filter and a LC linear polarimeter. The CorMag filter is part of the ESCAPE experiment to be based at the French-Italian Concordia base in Antarctica. The linear polarization by resonance scattering of coronal permitted line-emission in the ultraviolet (UV)can be modified by magnetic fields through the Hanle effect. Space-based UV spectro-polarimeters would provide an additional tool for the disgnostics of coronal magnetism. As a case study of space-borne UV spectro-polarimeters, this presentation will describe the future upgrade of the Sounding-rocket Coronagraphic Experiment (SCORE) to include new generation, high-efficiency UV polarizer with the capability of imaging polarimetry of the HI Lyman-α, 121.6 nm. SCORE is a multi-wavelength imager for the emission-lines, HeII 30.4 nm and HI 121.6 nm, and visible-light broad-band emission of the polarized K-corona. SCORE has flown successfully in 2009. The second lauch is scheduled in 2016. Proba-3 is the other future solar mission that would provide the opportunity of diagnosing the coronal magnetic field. Proba-3 is the first precision formation-flying mission to launched in 2019). A pair of satellites will fly together maintaining a fixed configuration as a 'large rigid

A Comparison of Methods for Estimating Quadratic Effects in Nonlinear Structural Equation Models

Science.gov (United States)

Harring, Jeffrey R.; Weiss, Brandi A.; Hsu, Jui-Chen

2012-01-01

Two Monte Carlo simulations were performed to compare methods for estimating and testing hypotheses of quadratic effects in latent variable regression models. The methods considered in the current study were (a) a 2-stage moderated regression approach using latent variable scores, (b) an unconstrained product indicator approach, (c) a latent…

Effect of pilates method on inspiratory and expiratory muscle strength in the elderly

Directory of Open Access Journals (Sweden)

Beatriz Mendes Tozim

2018-03-01

Full Text Available With aging, the respiratory muscle strength decreases and the pilates method is a technique that uses respiration as one of its principles. The present study has the aim of analyzing the influence of the pilates method on respiratory muscle strength in older women. For the evaluation of respiratory muscle strength (inspiratory and expiratory, manovacuometer was used. Thirty-one older women were divided into two groups: 14 participated in the pilates group and 17 in the control group. Participants of the pilates group performed 16 sessions of pilates method with an hour of training, twice week for eight weeks. The control group participated in four educational lectures for eight weeks. For statistical analysis, Shapiro-Wilk, ANOVA for repeated measures (p <0.05 and Cohen’s D index were performed. The results showed significant difference and the mean effect for the Cohen’s D index expiratory muscle strength of the pilates group when comparing before (69.71 ± 25.48 and after (85.23 ± 22.21 training (p<0.05 with an increase of 23%. The results of inspiratory muscle strength were not significant but presented an average effect for the Cohen’s D index for the pilates group before (69.71 ± 35.46 and after (88.00 ± 34.87 training, with an increase of 27%. The control group did not present significant differences for the variables evaluated. It could be concluded that the pilates method is effective in improving expiratory muscle strength and provides positive effects on the increase in inspiratory muscle strength.

Testing an Adapted Modified Delphi Method: Synthesizing Multiple Stakeholder Ratings of Health Care Service Effectiveness.

Science.gov (United States)

Escaron, Anne L; Chang Weir, Rosy; Stanton, Petra; Vangala, Sitaram; Grogan, Tristan R; Clarke, Robin M

2016-03-01

The Affordable Care Act incentivizes health systems for better meeting patient needs, but often guidance about patient preferences for particular health services is limited. All too often vulnerable patient populations are excluded from these decision-making settings. A community-based participatory approach harnesses the in-depth knowledge of those experiencing barriers to health care. We made three modifications to the RAND-UCLA appropriateness method, a modified Delphi approach, involving patients, adding an advisory council group to characterize existing knowledge in this little studied area, and using effectiveness rather than "appropriateness" as the basis for rating. As a proof of concept, we tested this method by examining the broadly delivered but understudied nonmedical services that community health centers provide. This method created discrete, new knowledge about these services by defining 6 categories and 112 unique services and by prioritizing among these services based on effectiveness using a 9-point scale. Consistent with the appropriateness method, we found statistical convergence of ratings among the panelists. Challenges include time commitment and adherence to a clear definition of effectiveness of services. This diverse stakeholder engagement method efficiently addresses gaps in knowledge about the effectiveness of health care services to inform population health management. © 2015 Society for Public Health Education.

Method for the substantial reduction of quenching effects in luminescence spectrometry

Science.gov (United States)

Demas, J.N.; Jones, W.M.; Keller, R.A.

1987-06-26

Method for reducing quenching effects in analytical luminescence measurements. Two embodiments of the present invention are described which relate to a form of time resolution based on the amplitudes and phase shifts of modulated emission signals. In the first embodiment, the measured modulated emission signal is substantially independent of sample quenching at sufficiently high frequencies. In the second embodiment, the modulated amplitude and the phase shift between the emission signal and the excitation source are simultaneously measured. Using either method, the observed modulated amplitude may be reduced to its unquenched value. 3 figs.

Effect of different Processing Methods on the Vitamin A content of ...

African Journals Online (AJOL)

Objectives: This study was designed to identify commonly used vegetables and assess the effect of processing on the vitamin A content of four commonly used vegetables. Materials and methods: Data was collected from one hundred women systematically selected using structured, validated and pre-tested questionnaire.

Analysis of effects of extension teaching methods on farmers' level of ...

African Journals Online (AJOL)

This study analyzed the effects of extension teaching methods used by Ogun State (Nigeria) Agricultural Development Programme's extension agents on farmers' level of production in maize and cassava. The sample included 210 randomly selected farmers, comprising adopters and non-adopters of introduced agricultural ...

Weibull statistics effective area and volume in the ball-on-ring testing method

DEFF Research Database (Denmark)

Frandsen, Henrik Lund

2014-01-01

The ball-on-ring method is together with other biaxial bending methods often used for measuring the strength of plates of brittle materials, because machining defects are remote from the high stresses causing the failure of the specimens. In order to scale the measured Weibull strength...... to geometries relevant for the application of the material, the effective area or volume for the test specimen must be evaluated. In this work analytical expressions for the effective area and volume of the ball-on-ring test specimen is derived. In the derivation the multiaxial stress field has been accounted...

Effectiveness of creative and productive instructional method towards students' learning achievement in steel structure course

Science.gov (United States)

Sugiyanto, Pribadi, Supriyanto, Bambang

2017-09-01

The purpose of this study was to investigate the effectiveness of Creative & Productive instructional method compared with conventional method. This research was a quasi-experimental study involving all Civil Engineering students at Universitas Negeri Malang who were taking a course of Steel Structure. The students were randomly assigned to two different treatment groups, 30 students in experimental group and 37 students in the control group. It was assumed that these groups were equal in all relevant aspects; they differed only in the treatment administered. We used the t-test to test the hypothesis. The results of this research suggest that: (l) the use of Creative & Productive instructional method can significantly improve students' learning achievement, (2) the use of Creative & Productive instructional method can significantly improve students' retention, (3) students' motivation has a significant effect on their learning achievement, and (4) students' motivation has a significant effect on their retention.

Effects of preprocessing method on TVOC emission of car mat

Science.gov (United States)

Wang, Min; Jia, Li

2013-02-01

The effects of the mat preprocessing method on total volatile organic compounds (TVOC) emission of car mat are studied in this paper. An appropriate TVOC emission period for car mat is suggested. The emission factors for total volatile organic compounds from three kinds of new car mats are discussed. The car mats are preprocessed by washing, baking and ventilation. When car mats are preprocessed by washing, the TVOC emission for all samples tested are lower than that preprocessed in other methods. The TVOC emission is in stable situation for a minimum of 4 days. The TVOC emitted from some samples may exceed 2500μg/kg. But the TVOC emitted from washed Polyamide (PA) and wool mat is less than 2500μg/kg. The emission factors of total volatile organic compounds (TVOC) are experimentally investigated in the case of different preprocessing methods. The air temperature in environment chamber and the water temperature for washing are important factors influencing on emission of car mats.

Greenhouse effect gases: reduction challenges and accounting methods

International Nuclear Information System (INIS)

Dumergues, Laurent

2012-01-01

In this article, the author first proposes an overview of strategic challenges related to the reduction of greenhouse gas emissions. He indicates and discusses the various economic consequences of climate change. These consequences can be environmental (issues ranging from a loss of biodiversity to agriculture), social (from climate refugees to tourism), and economic (from climate disasters to insurance). He focuses on the issue of energy (oil at the base of our economy, carbon contents) and discusses competition issues (an always more demanding regulation, and unavoidable practices). In the second part, he proposes an overview of methods of accounting of greenhouse effect gases, and discusses how to perform an emission inventory

A Fast and Effective Block Adjustment Method with Big Data

Directory of Open Access Journals (Sweden)

ZHENG Maoteng

2017-02-01

Full Text Available To deal with multi-source, complex and massive data in photogrammetry, and solve the high memory requirement and low computation efficiency of irregular normal equation caused by the randomly aligned and large scale datasets, we introduce the preconditioned conjugate gradient combined with inexact Newton method to solve the normal equation which do not have strip characteristics due to the randomly aligned images. We also use an effective sparse matrix compression format to compress the big normal matrix, a brand new workflow of bundle adjustment is developed. Our method can avoid the direct inversion of the big normal matrix, the memory requirement of the normal matrix is also decreased by the proposed sparse matrix compression format. Combining all these techniques, the proposed method can not only decrease the memory requirement of normal matrix, but also largely improve the efficiency of bundle adjustment while maintaining the same accuracy as the conventional method. Preliminary experiment results show that the bundle adjustment of a dataset with about 4500 images and 9 million image points can be done in only 15 minutes while achieving sub-pixel accuracy.

The effective atomic numbers of some biomolecules calculated by two methods: A comparative study

DEFF Research Database (Denmark)

Manohara, S.R.; Hanagodimath, S.M.; Gerward, Leif

2009-01-01

The effective atomic numbers Z(eff) of some fatty acids and amino acids have been calculated by two numerical methods, a direct method and an interpolation method, in the energy range of 1 keV-20 MeV. The notion of Z(eff) is given a new meaning by using a modern database of photon interaction cro...

Effect of Different Prophylaxis Methods on Microleakage of Microfilled Composite Restorations

Directory of Open Access Journals (Sweden)

Soodabeh Kimyai

2012-04-01

Full Text Available Background and aims. This study was aimed at evaluating the effect of different prophylaxis methods on microleakage of microfilled composite restorations. Materials and methods. In this in vitro study, class V cavities were prepared on buccal surfaces of 84 bovine teeth. The teeth were restored with Tetric N-Bond adhesive and Heliomolar composite resin. Subsequent to a thermocycling procedure and three months of storage in distilled water, the teeth were randomly assigned to four groups (n=21: (1 prophylaxis with a rubber cup and pumice; (2 prophylaxis with a brush and pumice; (3 prophylaxis with air/powder polishing device; and (4 no prophylaxis (the control group. Then the teeth were immersed in 2% basic fuchsin for 24 hours and sectioned for microleakage evaluation under a stereomicroscope. Data were analyzed using Kruskal-Wallis and Wilcoxon Signed Ranks tests. Statistical significance was defined at p<0.05. Results. There were no statistically significant differences in occlusal and gingival microleakage between the groups (p=0.996 and p=0.860, respectively. In all the groups gingival margins exhibited significantly higher microleakage values compared to occlusal margins (p<0.0005. Conclusion. Prophylaxis methods had no adverse effect on marginal leakage of microfilled composite resin restorations.

A multivariate nonlinear mixed effects method for analyzing energy partitioning in growing pigs

DEFF Research Database (Denmark)

Strathe, Anders Bjerring; Danfær, Allan Christian; Chwalibog, André

2010-01-01

to the multivariate nonlinear regression model because the MNLME method accounted for correlated errors associated with PD and LD measurements and could also include the random effect of animal. It is recommended that multivariate models used to quantify energy metabolism in growing pigs should account for animal......Simultaneous equations have become increasingly popular for describing the effects of nutrition on the utilization of ME for protein (PD) and lipid deposition (LD) in animals. The study developed a multivariate nonlinear mixed effects (MNLME) framework and compared it with an alternative method...... for estimating parameters in simultaneous equations that described energy metabolism in growing pigs, and then proposed new PD and LD equations. The general statistical framework was implemented in the NLMIXED procedure in SAS. Alternative PD and LD equations were also developed, which assumed...

Signal Processing Methods for Removing the Effects of Whole Body Vibration upon Speech

Science.gov (United States)

Bitner, Rachel M.; Begault, Durand R.

2014-01-01

Humans may be exposed to whole-body vibration in environments where clear speech communications are crucial, particularly during the launch phases of space flight and in high-performance aircraft. Prior research has shown that high levels of vibration cause a decrease in speech intelligibility. However, the effects of whole-body vibration upon speech are not well understood, and no attempt has been made to restore speech distorted by whole-body vibration. In this paper, a model for speech under whole-body vibration is proposed and a method to remove its effect is described. The method described reduces the perceptual effects of vibration, yields higher ASR accuracy scores, and may significantly improve intelligibility. Possible applications include incorporation within communication systems to improve radio-communication systems in environments such a spaceflight, aviation, or off-road vehicle operations.

Evaluation of several methods for assessing the effects of occupational exposure to radiation

International Nuclear Information System (INIS)

Gilbert, E.S.

1980-05-01

The evaluation of health effects in populations occupationally exposed to low-level ionizing radiation is a matter of considerable current controversy. The analysis of data on such exposures presents a variety of problems resulting from the time dependent nature of the exposure data, certain selective biases found in working populations, and particularly limits imposed by the size of the populations, and the magnitudes of exposures received. In this paper, several methods of analysis are presented and evaluated using data from the Hanford plant for illustration. Questions of interest include whether or not to utilize an external control, and how to handle the highly skewed exposure data most effectively. Expressions for the power of various procedures are used not only to compare methods but also to evaluate the potential for detecting effects in occupationally exposed populations

Broadband antireflective silicon carbide surface produced by cost-effective method

DEFF Research Database (Denmark)

Argyraki, Aikaterini; Ou, Yiyu; Ou, Haiyan

2013-01-01

A cost-effective method for fabricating antireflective subwavelength structures on silicon carbide is demonstrated. The nanopatterning is performed in a 2-step process: aluminum deposition and reactive ion etching. The effect, of the deposited aluminum film thickness and the reactive ion etching...... conditions, on the average surface reflectance and nanostructure landscape have been investigated systematically. The average reflectance of silicon carbide surface is significantly suppressed from 25.4% to 0.05%, under the optimal experimental conditions, in the wavelength range of 390-784 nm. The presence...... of stochastic nanostructures also changes the wetting properties of silicon carbide surface from hydrophilic (47°) to hydrophobic (108°)....

Effective updating process of seismic fragilities using Bayesian method and information entropy

International Nuclear Information System (INIS)

Kato, Masaaki; Takata, Takashi; Yamaguchi, Akira

2008-01-01

Seismic probabilistic safety assessment (SPSA) is an effective method for evaluating overall performance of seismic safety of a plant. Seismic fragilities are estimated to quantify the seismically induced accident sequences. It is a great concern that the SPSA results involve uncertainties, a part of which comes from the uncertainty in the seismic fragility of equipment and systems. A straightforward approach to reduce the uncertainty is to perform a seismic qualification test and to reflect the results on the seismic fragility estimate. In this paper, we propose a figure-of-merit to find the most cost-effective condition of the seismic qualification tests about the acceleration level and number of components tested. Then a mathematical method to reflect the test results on the fragility update is developed. A Bayesian method is used for the fragility update procedure. Since a lognormal distribution that is used for the fragility model does not have a Bayes conjugate function, a parameterization method is proposed so that the posterior distribution expresses the characteristics of the fragility. The information entropy is used as the figure-of-merit to express importance of obtained evidence. It is found that the information entropy is strongly associated with the uncertainty of the fragility. (author)

Microstructure-based numerical modeling method for effective permittivity of ceramic/polymer composites

Science.gov (United States)

Jylhä, Liisi; Honkamo, Johanna; Jantunen, Heli; Sihvola, Ari

2005-05-01

Effective permittivity was modeled and measured for composites that consist of up to 35vol% of titanium dioxide powder dispersed in a continuous epoxy matrix. The study demonstrates a method that enables fast and accurate numerical modeling of the effective permittivity values of ceramic/polymer composites. The model requires electrostatic Monte Carlo simulations, where randomly oriented homogeneous prism-shaped inclusions occupy random positions in the background phase. The computation cost of solving the electrostatic problem by a finite-element code is decreased by the use of an averaging method where the same simulated sample is solved three times with orthogonal field directions. This helps to minimize the artificial anisotropy that results from the pseudorandomness inherent in the limited computational domains. All the required parameters for numerical simulations are calculated from the lattice structure of titanium dioxide. The results show a very good agreement between the measured and numerically calculated effective permittivities. When the prisms are approximated by oblate spheroids with the corresponding axial ratio, a fairly good prediction for the effective permittivity of the mixture can be achieved with the use of an advanced analytical mixing formula.

A simple and feasible method of effectiveness evaluation on radioactive decontamination action

International Nuclear Information System (INIS)

Chen Lin; Geng Xiaobing; Sun Jian; Wang Jihong; Guo Lijun

2012-01-01

Radioactive decontamination is a vital task in nuclear emergency response. The assessment of decontamination effectiveness is of great importance to decision-making. An index system for effectiveness evaluation of radioactive decontamination action in nuclear emergency response is produced. A method of decontamination effectiveness evaluation based on analytic hierarchy process and fuzzy comprehensive evaluation is presented. Index weights are determined through analytic hierarchy process. And scores of objects in each hierarchy are judged by fuzzy comprehensive evaluation. Then comprehensive effectiveness of the top object can be obtained, which can offer a basis for decision-making of decontamination action. (authors)

3-D Forward modeling of Induced Polarization Effects of Transient Electromagnetic Method

Science.gov (United States)

Wu, Y.; Ji, Y.; Guan, S.; Li, D.; Wang, A.

2017-12-01

In transient electromagnetic (TEM) detection, Induced polarization (IP) effects are so important that they cannot be ignored. The authors simulate the three-dimensional (3-D) induced polarization effects in time-domain directly by applying the finite-difference time-domain method (FDTD) based on Cole-Cole model. Due to the frequency dispersion characteristics of the electrical conductivity, the computations of convolution in the generalized Ohm's law of fractional order system makes the forward modeling particularly complicated. Firstly, we propose a method to approximate the fractional order function of Cole-Cole model using a lower order rational transfer function based on error minimum theory in the frequency domain. In this section, two auxiliary variables are introduced to transform nonlinear least square fitting problem of the fractional order system into a linear programming problem, thus avoiding having to solve a system of equations and nonlinear problems. Secondly, the time-domain expression of Cole-Cole model is obtained by using Inverse Laplace transform. Then, for the calculation of Ohm's law, we propose an e-index auxiliary equation of conductivity to transform the convolution to non-convolution integral; in this section, the trapezoid rule is applied to compute the integral. We then substitute the recursion equation into Maxwell's equations to derive the iterative equations of electromagnetic field using the FDTD method. Finally, we finish the stimulation of 3-D model and evaluate polarization parameters. The results are compared with those obtained from the digital filtering solution of the analytical equation in the homogeneous half space, as well as with the 3-D model results from the auxiliary ordinary differential equation method (ADE). Good agreements are obtained across the three methods. In terms of the 3-D model, the proposed method has higher efficiency and lower memory requirements as execution times and memory usage were reduced by 20

Simple and effective methods of freezing capercaillie (Tetrao urogallus L. semen.

Directory of Open Access Journals (Sweden)

Artur Kowalczyk

Full Text Available A continuous decline in the number and range of capercaillie (Tetrao urogallus L. in many European countries can be observed, mostly due to habitat destruction by human activity, unecological forestry management, and increased density of natural predators. Ex situ in vitro gene banks provide a unique opportunity to preserve the genetic material for future generations. Simple and effective cryopreservation methods for capercaillie semen are discussed. Semen was collected from seven males kept in the Capercaillie Breeding Centre at Forestry Wisła in Poland. Within five minutes after collection, ejaculates were diluted with EK diluent, then divided into two parts, and subjected to two freezing procedures: in pellets and in straws. In fresh semen, ejaculate clearness, viscosity, color and volume, as well as sperm concentration, motility and morphology, were evaluated, while in frozen-thawed semen only motility and morphology of sperm were determined. Fertilizing ability of thawed semen was examined for samples frozen in straws. Significant (P<0.05 differences between individual males were found in relation to the majority of fresh semen traits: ejaculate volume averaged 102.1 µL (varying from 49.0 to 205.0; average sperm concentration was 632.5 x 10⁶ mL⁻¹ (178.8-1257.1; percentage of live normal cells varied from 39.2 to 70.3% (58.7% on an average; percentage of motile cells ranged from 76.0 to 85.7% and motility parameters were male dependent, as well. Both cryopreservation methods had a negative effect on morphology and motility of frozen-thawed semen; however, the straw method yielded 60.7% and the pellet method 42.5% of live cells in total in thawed semen (P<0.05, while the number of live normal (intact cells was similar (22.4 and 22.2%, respectively. Egg fertility varied between 77.8 and 91.7% (average 84.4%. Both freezing procedures seem to be effective in obtaining acceptable viability and high fertilizing potency of thawed sperm and

Cost and effectiveness comparison of two methods for screening potential blood donors for anaemia in Vietnam.

Science.gov (United States)

Tyrrell, A; Worrall, E; Que, T N; Bates, I

2011-06-01

To compare the cost and effectiveness of Copper Sulphate (CS) and HemoCue (HC) methods for screening blood donors for anaemia. Robust information from developing countries about cost and effectiveness of anaemia screening methods for blood donors is scarce. In such countries there are widespread shortages of blood, so the most cost-effective method should maximise blood supply without compromising donor safety. Economic data (e.g. staff time, equipment and buildings) were collected from direct observation of procedures and purchase data from Hanoi's Central Blood Bank administrative department. A framework for comparing the cost and effectiveness of anaemia screening methods was developed and a cost per effective (i.e. usable and accurate) test was generated for each method. Samples from 100 potential donors from the Hanoi Central Blood Bank (static) and 198 from two mobile units were tested. The mean probability of an ineffective anaemia test was 0·1 (0·05-0·2). The average cost of an HC test was $0·75 (static $0·61 and mobile $0·89) and a CS test was $0·31 (static $0·17 and mobile $0·45). The difference between static and mobile units was predominantly due to transport costs; the difference between the two methods was predominantly due to the HC microcuvettes. In this setting the CS yields greater value for money than the HC method for screening blood donors. The relative cost and effectiveness of CS and HC may be different in places with higher staff turnover, lower test accuracy, higher anaemia prevalence or lower workload than in Vietnam. © 2010 Liverpool School of Tropical Medicine. Transfusion Medicine © 2010 British Blood Transfusion Society.

Effective-range function methods for charged particle collisions

Science.gov (United States)

Gaspard, David; Sparenberg, Jean-Marc

2018-04-01

Different versions of the effective-range function method for charged particle collisions are studied and compared. In addition, a novel derivation of the standard effective-range function is presented from the analysis of Coulomb wave functions in the complex plane of the energy. The recently proposed effective-range function denoted as Δℓ [Ramírez Suárez and Sparenberg, Phys. Rev. C 96, 034601 (2017), 10.1103/PhysRevC.96.034601] and an earlier variant [Hamilton et al., Nucl. Phys. B 60, 443 (1973), 10.1016/0550-3213(73)90193-4] are related to the standard function. The potential interest of Δℓ for the study of low-energy cross sections and weakly bound states is discussed in the framework of the proton-proton S10 collision. The resonant state of the proton-proton collision is successfully computed from the extrapolation of Δℓ instead of the standard function. It is shown that interpolating Δℓ can lead to useful extrapolation to negative energies, provided scattering data are known below one nuclear Rydberg energy (12.5 keV for the proton-proton system). This property is due to the connection between Δℓ and the effective-range function by Hamilton et al. that is discussed in detail. Nevertheless, such extrapolations to negative energies should be used with caution because Δℓ is not analytic at zero energy. The expected analytic properties of the main functions are verified in the complex energy plane by graphical color-based representations.

Effect of harvest methods on yield and quality of Marketable flowers ...

African Journals Online (AJOL)

This study was carried out to determine the effects of harvest methods (proximal and median harvests) on yield and quality of marketable flowers of greenhouse hybrid tea rose (Rosa hybrida L.) cultivars of different growth habits. The cultivar Grant Galla represented cultivars of vigorous growth habit whereas 'Vivaldi' ...

Investigating the Effects of a Math-Enhanced Agricultural Teaching Methods Course

Science.gov (United States)

Stripling, Christopher T.; Roberts, T. Grady

2013-01-01

Numerous calls have been made for agricultural education to support core academic subject matter including mathematics. Previous research has shown that the incorporation of mathematics content into a teaching methods course had a positive effect on preservice teachers' mathematics content knowledge. The purpose of this study was to investigate…

Effects of processing methods on nutritive values of Ekuru from two ...

African Journals Online (AJOL)

Beans contain substantial amount of protein, dietary fibre, B-vitamins, minerals, and anti-nutrients which limit their utilisation. Processing reduce the level of antinutrients in plant products but little information exist on effects of processing methods on nutrient and antinutrient composition of bean products. This study was ...

[Comparative effectiveness of different treatment methods of liver failure].

Science.gov (United States)

Kutepov, D E; Vershinina, M G; Pasechnik, I N; Sal'nikov, P S

2014-01-01

It was analyzed the results of treatment of 217 patients (139 men, 78 women) with chronic liver failure in case of liver cirrhosis of various etiology for study of degree of hepatic encephalopathyregression. All patients were divided into 3 groups. In the first group the drug therapy was used. In the second group additionallyplasma exchange was performed, in the third group - alsomolecular absorbent recirculating system was used (effectiveness of MARS-therapy).The results showed that the use of extracorporeal treatment techniques can effectively reduce the severity of hepatic encephalopathy in patients with liver cirrhosis. MARS-therapy improved the neurological status of patientsmore significantly in this case. It is considered that the inclusion of MARS-therapy in the combined treatment of patients leads to a significant reduction of hepatic encephalopathyseverity (1-2 points), in comparison with other methods of treatment.

An efficient method for evaluating the effect of input parameters on the integrity of safety systems

International Nuclear Information System (INIS)

Tang, Zhang-Chun; Zuo, Ming J.; Xiao, Ningcong

2016-01-01

Safety systems are significant to reduce or prevent risk from potentially dangerous activities in industry. Probability of failure to perform its functions on demand (PFD) for safety system usually exhibits variation due to the epistemic uncertainty associated with various input parameters. This paper uses the complementary cumulative distribution function of the PFD to define the exceedance probability (EP) that the PFD of the system is larger than the designed value. Sensitivity analysis of safety system is further investigated, which focuses on the effect of the variance of an individual input parameter on the EP resulting from epistemic uncertainty associated with the input parameters. An available numerical technique called finite difference method is first employed to evaluate the effect, which requires extensive computational cost and needs to select a step size. To address these difficulties, this paper proposes an efficient simulation method to estimate the effect. The proposed method needs only an evaluation to estimate the effects corresponding to all input parameters. Two examples are used to demonstrate that the proposed method can obtain more accurate results with less computation time compared to reported methods. - Highlights: • We define a sensitivity index to measure effect of a parameter for safety system. • We analyze the physical meaning of the sensitivity index. • We propose an efficient simulation method to assess the sensitivity index. • We derive the formulations of this index for lognormal and beta distributions. • Results identify important parameters on exceedance probability of safety system.

A new method for weakening the combined effect of residual errors on multibeam bathymetric data

Science.gov (United States)

Zhao, Jianhu; Yan, Jun; Zhang, Hongmei; Zhang, Yuqing; Wang, Aixue

2014-12-01

Multibeam bathymetric system (MBS) has been widely applied in the marine surveying for providing high-resolution seabed topography. However, some factors degrade the precision of bathymetry, including the sound velocity, the vessel attitude, the misalignment angle of the transducer and so on. Although these factors have been corrected strictly in bathymetric data processing, the final bathymetric result is still affected by their residual errors. In deep water, the result usually cannot meet the requirements of high-precision seabed topography. The combined effect of these residual errors is systematic, and it's difficult to separate and weaken the effect using traditional single-error correction methods. Therefore, the paper puts forward a new method for weakening the effect of residual errors based on the frequency-spectrum characteristics of seabed topography and multibeam bathymetric data. Four steps, namely the separation of the low-frequency and the high-frequency part of bathymetric data, the reconstruction of the trend of actual seabed topography, the merging of the actual trend and the extracted microtopography, and the accuracy evaluation, are involved in the method. Experiment results prove that the proposed method could weaken the combined effect of residual errors on multibeam bathymetric data and efficiently improve the accuracy of the final post-processing results. We suggest that the method should be widely applied to MBS data processing in deep water.

A new cascade method for studying isotope effect in chemical exchange system without valance change

International Nuclear Information System (INIS)

Wen Xiaoning; Luo Wenzong

1987-01-01

A new cascade method for studying isotope effect in chemical exchange system without valance change is developed and described. This method is simple to use and consumes less extractant as compared with the commonly used Woodward method. It is also convenient for unstable systems

Moderator feedback effects in two-dimensional nodal methods for pressurized water reactor analysis

International Nuclear Information System (INIS)

Downar, T.J.

1987-01-01

A method was developed for incorporating moderator feedback effects in two-dimensional nodal codes used for pressurized water reactor (PWR) neutronic analysis. Equations for the assembly average quality and density are developed in terms of the assembly power calculated in two dimensions. The method is validated with a Westinghouse PWR using the Electric Power Research Institute code SIMULATE-E. Results show a several percent improvement is achieved in the two-dimensional power distribution prediction compared to methods without moderator feedback

Systematic process synthesis and design methods for cost effective waste minimization

International Nuclear Information System (INIS)

Biegler, L.T.; Grossman, I.E.; Westerberg, A.W.

1995-01-01

We present progress on our work to develop synthesis methods to aid in the design of cost effective approaches to waste minimization. Work continues to combine the approaches of Douglas and coworkers and of Grossmann and coworkers on a hierarchical approach where bounding information allows it to fit within a mixed integer programming approach. We continue work on the synthesis of reactors and of flexible separation processes. In the first instance, we strive for methods we can use to reduce the production of potential pollutants, while in the second we look for ways to recover and recycle solvents

Systematic process synthesis and design methods for cost effective waste minimization

Energy Technology Data Exchange (ETDEWEB)

Biegler, L.T.; Grossman, I.E.; Westerberg, A.W. [Carnegie Mellon Univ., Pittsburgh, PA (United States)

1995-12-31

We present progress on our work to develop synthesis methods to aid in the design of cost effective approaches to waste minimization. Work continues to combine the approaches of Douglas and coworkers and of Grossmann and coworkers on a hierarchical approach where bounding information allows it to fit within a mixed integer programming approach. We continue work on the synthesis of reactors and of flexible separation processes. In the first instance, we strive for methods we can use to reduce the production of potential pollutants, while in the second we look for ways to recover and recycle solvents.

Effectiveness of Various Innovative Learning Methods in Health Science Classrooms: A Meta-Analysis

Science.gov (United States)

Kalaian, Sema A.; Kasim, Rafa M.

2017-01-01

This study reports the results of a meta-analysis of the available literature on the effectiveness of various forms of innovative small-group learning methods on student achievement in undergraduate college health science classrooms. The results of the analysis revealed that most of the primary studies supported the effectiveness of the…

Experimental methods of effective delayed neutron fraction

International Nuclear Information System (INIS)

Yamaye, Yoshihiro

1995-01-01

The defining principle and examples of β eff measurement method: the substitutional method, Cf neutron source method, Bennett method, the coupling coefficient method and Nelson method were introduced and surveyed. Measurement errors and C/E value of the substitutional, Cf ray source and Bennett method were of the order of 3%, 5% and 3 - 6% and 0.903 - 0.965, 1.85 and 1.019 - 1.165, respectably. Evaluation of the absolute value is so hard that β eff measurement belongs to the difficult experiment. The dependence on nuclear calculation in decreasing order is the substitutional, Cf ray source, Bennett, the coupling coefficient and Nelson number method. If good substitute materials were selected, the substitutional method has possibility to determine β eff by small correction value or independent on calculation. (S.Y.)

Research with School Students: Four Innovative Methods Used to Explore Effective Teaching

Directory of Open Access Journals (Sweden)

Jessica Faye Heal

2015-03-01

Full Text Available This article outlines four research methods we’ve employed to enhance how students from low-income backgrounds engage in research exploring effective teaching. It firstly outlines the need to be innovative, drawing Article 12 of the United Nations Convention on the Rights of the Child, and then moves on to explain two methods that scaffold a semi-structured interview, one child-led classroom tour and finally a creative ‘draw and tell’ approach. It argues that these methods are successful because they disrupt the researcher-participant power imbalance using the following techniques: Familiarity to the student, empowering the student to be an expert, and giving the student choice.

Effect of domestic cooking methods on egg yolk xanthophylls.

Science.gov (United States)

Nimalaratne, Chamila; Lopes-Lutz, Daise; Schieber, Andreas; Wu, Jianping

2012-12-26

Xanthophylls are a class of bioactive compounds known to play an important role in preventing age-related macular degeneration. Egg yolk is a rich source of highly bioavailable xanthophylls including lutein and zeaxanthin. The effects of domestic cooking methods (boiling, frying, microwaving) on egg yolk xanthophyll content were investigated. A LC-(APCI)-MS/MS method was used to identify and quantify all-E- and Z-isomers of lutein, zeaxanthin, canthaxanthin, and β-apo-8'-carotenoic acid ethyl ester in fresh and cooked egg yolks. Both fresh and cooked yolks showed similar xanthophyll profiles but with higher contents of Z-isomers in cooked samples. All-E-lutein was the most affected, with 22.5%, 16.7%, and 19.3% reductions in boiled, microwaved, and fried yolk extracts, respectively. Total xanthophyll losses ranged from 6% to 18%. The results presented here could be useful in calculating the dietary intake of xanthophylls and also in assessing the xanthophyll profiles and contents of egg-containing products.

Global self-esteem and method effects: competing factor structures, longitudinal invariance, and response styles in adolescents.

Science.gov (United States)

Urbán, Róbert; Szigeti, Réka; Kökönyei, Gyöngyi; Demetrovics, Zsolt

2014-06-01

The Rosenberg Self-Esteem Scale (RSES) is a widely used measure for assessing self-esteem, but its factor structure is debated. Our goals were to compare 10 alternative models for the RSES and to quantify and predict the method effects. This sample involves two waves (N =2,513 9th-grade and 2,370 10th-grade students) from five waves of a school-based longitudinal study. The RSES was administered in each wave. The global self-esteem factor with two latent method factors yielded the best fit to the data. The global factor explained a large amount of the common variance (61% and 46%); however, a relatively large proportion of the common variance was attributed to the negative method factor (34 % and 41%), and a small proportion of the common variance was explained by the positive method factor (5% and 13%). We conceptualized the method effect as a response style and found that being a girl and having a higher number of depressive symptoms were associated with both low self-esteem and negative response style, as measured by the negative method factor. Our study supported the one global self-esteem construct and quantified the method effects in adolescents.

Global self-esteem and method effects: competing factor structures, longitudinal invariance and response styles in adolescents

Science.gov (United States)

Urbán, Róbert; Szigeti, Réka; Kökönyei, Gyöngyi; Demetrovics, Zsolt

2013-01-01

The Rosenberg Self-Esteem Scale (RSES) is a widely used measure for assessing self-esteem, but its factor structure is debated. Our goals were to compare 10 alternative models for RSES; and to quantify and predict the method effects. This sample involves two waves (N=2513 ninth-grade and 2370 tenth-grade students) from five waves of a school-based longitudinal study. RSES was administered in each wave. The global self-esteem factor with two latent method factors yielded the best fit to the data. The global factor explained large amount of the common variance (61% and 46%); however, a relatively large proportion of the common variance was attributed to the negative method factor (34 % and 41%), and a small proportion of the common variance was explained by the positive method factor (5% and 13%). We conceptualized the method effect as a response style, and found that being a girl and having higher number of depressive symptoms were associated with both low self-esteem and negative response style measured by the negative method factor. Our study supported the one global self-esteem construct and quantified the method effects in adolescents. PMID:24061931

Experimental investigation of radiation effect on human thermal comfort by Taguchi method

International Nuclear Information System (INIS)

Arslanoglu, Nurullah; Yigit, Abdulvahap

2016-01-01

Highlights: • Radiation heat flux from lighting lamps on human thermal comfort is studied. • The effect of posture position on thermal comfort is investigated. • The effect of clothing color on thermal comfort is examined. • Radiation heat flux from halogen reflector lamp increase skin temperature more. • Posture position effect on thermal comfort is less than the other parameters. - Abstract: In this study, the effect of radiation heat flux of lighting lamps on human thermal comfort was investigated by using Taguchi method. In addition, at indoor conditions, clothing color and posture position under the radiation effect on thermal comfort were also investigated. For this purpose, experiments were performed in an air conditioned laboratory room in summer and autumn seasons. The amount of temperature rise on the back was considered as performance parameter. An L8 orthogonal array was selected as an experimental plan for the third parameters mentioned above for summer and autumn seasons. The results were analyzed for the optimum conditions using signal-to-noise (S/N) ratio and ANOVA method. The optimum results were found to be clear halogen lamp as lighting lamp, white as t-shirt color, standing as posture position, in summer season. The optimum levels of the lighting lamp, t-shirt color and posture position were found to be clear halogen lamp, white, sitting in autumn season, respectively.

Effect of Dietary Fiber Enrichment and Different Cooking Methods on Quality of Chicken Nuggets.

Science.gov (United States)

Pathera, Ashok K; Riar, C S; Yadav, Sanjay; Sharma, D P

2017-01-01

The effect of dietary fiber enrichment (wheat bran) and cooking methods (oven, steam and microwave) on functional and physico-chemical properties of raw nuggets formulation as well as nutritional, color and textural properties of chicken nuggets were analyzed in this study. Among different cooking methods used for nuggets preparation, steam cooked nuggets had significantly ( p cooking yield (97.16%) and total dietary fiber content (4.32%) in comparison to oven and microwave cooked nuggets. The effect of cooking methods and wheat bran incorporation was also noticed on textural properties of the nuggets. Hardness, firmness and toughness values of oven and steam cooked nuggets were significantly ( p cooked nuggets. Among nuggets prepared by different cooking methods, cohesiveness of microwave cooked nuggets was found to be significantly ( p cooked nuggets had significantly ( p cooked nuggets were found to be better among all nuggets due to their higher cooking yield and dietary fiber content.

Effective IPTV channel management method over heterogeneous environments

Science.gov (United States)

Joo, Hyunchul; Lee, Dai-boong; Song, Hwangjun

2007-09-01

This paper presents an effective IPTV channel management method using SVC (scalable video coding) that considers concurrently both channel zapping time and network utilization. A broadcasting channel is encoded in two-layered bitstream (base-layer channel and enhancement-layer channel) to supply for heterogeneous environments. The proposed algorithm locates only a limited numbers of base-layer channels close to users to reduce the network delay part of channel zapping time and adjusts the length of GOP (group of picture) into each base-layer channel to decrease the video decoding delay part of channel zapping time, which are performed based on user's channel preference information. Finally, the experimental results are provided to show the performance of the proposed schemes.

Development and application of QM/MM methods to study the solvation effects and surfaces

Energy Technology Data Exchange (ETDEWEB)

Dibya, Pooja Arora [Iowa State Univ., Ames, IA (United States)

2010-01-01

Quantum mechanical (QM) calculations have the advantage of attaining high-level accuracy, however QM calculations become computationally inefficient as the size of the system grows. Solving complex molecular problems on large systems and ensembles by using quantum mechanics still poses a challenge in terms of the computational cost. Methods that are based on classical mechanics are an inexpensive alternative, but they lack accuracy. A good trade off between accuracy and efficiency is achieved by combining QM methods with molecular mechanics (MM) methods to use the robustness of the QM methods in terms of accuracy and the MM methods to minimize the computational cost. Two types of QM combined with MM (QM/MM) methods are the main focus of the present dissertation: the application and development of QM/MM methods for solvation studies and reactions on the Si(100) surface. The solvation studies were performed using a discreet solvation model that is largely based on first principles called the effective fragment potential method (EFP). The main idea of combining the EFP method with quantum mechanics is to accurately treat the solute-solvent and solvent-solvent interactions, such as electrostatic, polarization, dispersion and charge transfer, that are important in correctly calculating solvent effects on systems of interest. A second QM/MM method called SIMOMM (surface integrated molecular orbital molecular mechanics) is a hybrid QM/MM embedded cluster model that mimics the real surface.3 This method was employed to calculate the potential energy surfaces for reactions of atomic O on the Si(100) surface. The hybrid QM/MM method is a computationally inexpensive approach for studying reactions on larger surfaces in a reasonably accurate and efficient manner. This thesis is comprised of four chapters: Chapter 1 describes the general overview and motivation of the dissertation and gives a broad background of the computational methods that have been employed in this work

Effects of preservation method on length and weight of pond raised ...

African Journals Online (AJOL)

Length and weight measurements of fish used for taxonomy and determination of length-weight relationship are taken from preserved specimen. This study sets out to investigate the effects of two preservatives, 70% alcohol and 10% formalin and freezing method on the length and weight of preserved specimens of tilapia ...

Logistic Regression with Multiple Random Effects: A Simulation Study of Estimation Methods and Statistical Packages

Science.gov (United States)

Kim, Yoonsang; Emery, Sherry

2013-01-01

Several statistical packages are capable of estimating generalized linear mixed models and these packages provide one or more of three estimation methods: penalized quasi-likelihood, Laplace, and Gauss-Hermite. Many studies have investigated these methods’ performance for the mixed-effects logistic regression model. However, the authors focused on models with one or two random effects and assumed a simple covariance structure between them, which may not be realistic. When there are multiple correlated random effects in a model, the computation becomes intensive, and often an algorithm fails to converge. Moreover, in our analysis of smoking status and exposure to anti-tobacco advertisements, we have observed that when a model included multiple random effects, parameter estimates varied considerably from one statistical package to another even when using the same estimation method. This article presents a comprehensive review of the advantages and disadvantages of each estimation method. In addition, we compare the performances of the three methods across statistical packages via simulation, which involves two- and three-level logistic regression models with at least three correlated random effects. We apply our findings to a real dataset. Our results suggest that two packages—SAS GLIMMIX Laplace and SuperMix Gaussian quadrature—perform well in terms of accuracy, precision, convergence rates, and computing speed. We also discuss the strengths and weaknesses of the two packages in regard to sample sizes. PMID:24288415

A new and effective method for thermostatting confined fluids

DEFF Research Database (Denmark)

De Luca, Sergio; Billy, Todd; Hansen, Jesper Schmidt

2014-01-01

not interact with wall atoms or each other, thus behaving as virtual particles. Their displacements violate the Lindemann criterion for melting, in such a way that the net effect would not amount to an additional confining surface. One advantage over standard techniques is the reduced computational cost......, particularly for large walls, since they can be kept rigid. Another advantage over accepted strategies is the opportunity to freeze complex charged walls such as β-cristobalite. The method furthermore overcomes the problem with polar fluids such as water, as thermalized charged surfaces require higher spring...

Connotations of pixel-based scale effect in remote sensing and the modified fractal-based analysis method

Science.gov (United States)

Feng, Guixiang; Ming, Dongping; Wang, Min; Yang, Jianyu

2017-06-01

Scale problems are a major source of concern in the field of remote sensing. Since the remote sensing is a complex technology system, there is a lack of enough cognition on the connotation of scale and scale effect in remote sensing. Thus, this paper first introduces the connotations of pixel-based scale and summarizes the general understanding of pixel-based scale effect. Pixel-based scale effect analysis is essentially important for choosing the appropriate remote sensing data and the proper processing parameters. Fractal dimension is a useful measurement to analysis pixel-based scale. However in traditional fractal dimension calculation, the impact of spatial resolution is not considered, which leads that the scale effect change with spatial resolution can't be clearly reflected. Therefore, this paper proposes to use spatial resolution as the modified scale parameter of two fractal methods to further analyze the pixel-based scale effect. To verify the results of two modified methods (MFBM (Modified Windowed Fractal Brownian Motion Based on the Surface Area) and MDBM (Modified Windowed Double Blanket Method)); the existing scale effect analysis method (information entropy method) is used to evaluate. And six sub-regions of building areas and farmland areas were cut out from QuickBird images to be used as the experimental data. The results of the experiment show that both the fractal dimension and information entropy present the same trend with the decrease of spatial resolution, and some inflection points appear at the same feature scales. Further analysis shows that these feature scales (corresponding to the inflection points) are related to the actual sizes of the geo-object, which results in fewer mixed pixels in the image, and these inflection points are significantly indicative of the observed features. Therefore, the experiment results indicate that the modified fractal methods are effective to reflect the pixel-based scale effect existing in remote sensing

Effects of Colony Creation Method and Beekeeper Education on Honeybee ("Apis mellifera") Mortality

Science.gov (United States)

Findlay, J. Reed; Eborn, Benjamin; Jones, Wayne

2015-01-01

The two-part study reported here analyzed the effects of beekeeper education and colony creation methods on colony mortality. The first study examined the difference in hive mortality between hives managed by beekeepers who had received formal training in beekeeping with beekeepers who had not. The second study examined the effect on hive…

Effectiveness of the Stewart Method in the Evaluation of Blood Gas Parameters.

Science.gov (United States)

Gezer, Mustafa; Bulucu, Fatih; Ozturk, Kadir; Kilic, Selim; Kaldirim, Umit; Eyi, Yusuf Emrah

2015-03-01

In 1981, Peter A. Stewart published a paper describing his concept for employing Strong Ion Difference. In this study we compared the HCO3 levels and Anion Gap (AG) calculated using the classic method and the Stewart method. Four hundred nine (409) arterial blood gases of 90 patients were collected retrospectively. Some were obtained from the same patients in different times and conditions. All blood samples were evaluated using the same device (ABL 800 Blood Gas Analyzer). HCO3 level and AG were calculated using the Stewart method via the website AcidBase.org. HCO3 levels, AG and strong ion difference (SID) were calculated using the Stewart method, incorporating the parameters of age, serum lactate, glucose, sodium, and pH, etc. According to classic method, the levels of HCO3 and AG were 22.4±7.2 mEq/L and 20.1±4.1 mEq/L respectively. According to Stewart method, the levels of HCO3 and AG were 22.6±7.4 and 19.9±4.5 mEq/L respectively. There was strong correlation between the classic method and the Stewart method for calculating HCO3 and AG. The Stewart method may be more effective in the evaluation of complex metabolic acidosis.

'Continuation rate', 'use-effectiveness' and their assessment for the diaphragm and jelly method.

Science.gov (United States)

Chandrasekaran, C; Karkal, M

1972-11-01

Abstract The application of the life-table technique in the calculation of use-effectiveness of a contraceptive was proposed by Potter in 1963.(1) The technique was also found to be useful in assessing the duration for which the use of a contraceptive was continued. The keen interest that existed in the use of IUD in the mid-1960's was reflected in the terminology developed for assessment of the continuity of use. 'Retention rate' was a frequently used index.(2) Because of the development of the concept of segments whose end-period determined either termination of the use of a method or its continuance on a cut-off date, 'closure rate' and 'termination rate' have been used as measures of the discontinuance of the use of methods primarily of the IUD.(3) While discussing concepts relating to acceptance, use and effectiveness of family planning methods, more generally, an expert group suggested that 'continuation' should be used to denote that a client (or a couple) had begun to practise a method and that the method was still being practised.(4) Since this group defined 'an acceptor' as a person taking service and/or advice, i.e. having an IUD insertion or a sterilization operation or receiving supplies (or advice on methods such as 'rhythm' or coitus-interruptus with the intent of using the method), the base for the assessment of continuation rates, according to this group, would be only those acceptors who had begun using the method. The lifetable method has also been used for the study of the continuation rate for pill acceptors.(5) Balakrishnan, et al., made a study of continuation rates of oral contraceptives using the multiple decrement life-table technique.(6).

An Efficient, Noniterative Method of Identifying the Cost-Effectiveness Frontier.

Science.gov (United States)

Suen, Sze-chuan; Goldhaber-Fiebert, Jeremy D

2016-01-01

Cost-effectiveness analysis aims to identify treatments and policies that maximize benefits subject to resource constraints. However, the conventional process of identifying the efficient frontier (i.e., the set of potentially cost-effective options) can be algorithmically inefficient, especially when considering a policy problem with many alternative options or when performing an extensive suite of sensitivity analyses for which the efficient frontier must be found for each. Here, we describe an alternative one-pass algorithm that is conceptually simple, easier to implement, and potentially faster for situations that challenge the conventional approach. Our algorithm accomplishes this by exploiting the relationship between the net monetary benefit and the cost-effectiveness plane. To facilitate further evaluation and use of this approach, we also provide scripts in R and Matlab that implement our method and can be used to identify efficient frontiers for any decision problem. © The Author(s) 2015.

Investigation of effective forensic cleaning methods for bullet and cartridge case samples

Science.gov (United States)

Shuherk, Cassie Marie

Bullet and cartridge case evidence may potentially link weapons and crimes through the comparison of toolmark patterns. This analysis relies on the clarity of the toolmarks and the ability of the examiner to identify patterns on the evidence. These patterns may be distorted by debris such as soil, blood, cyanoacrylate, and construction materials. Despite the potential importance of bullet and cartridge case evidence, few investigations of proper cleaning methods have been conducted. The present study was designed to examine the effects of various cleaning solutions and application methods on copper and brass bullets and cartridge cases. Additionally, this research investigated the efficacy of these cleaning protocols on the common evidence contaminants blood and cyanoacrylate. No cleaning method was found to be universally effective on both contaminant types and nondestructive to the metal surface. Ultrasonication was the most efficient application method employed when used in conjunction with an appropriate cleaning solution. Acetone proved to be safe and successful at removing heavy cyanoacrylate deposits from brass cartridge cases without damaging the metal. Although sulfuric acid removed most of the cyanoacrylate from the brass cartridge case, ultrasonication of the fumed cartridge cases in sulfuric acid caused the nickel-plated primer caps to turn black. Additionally, etching occurred when sulfuric acid was allowed to dry on the cartridge case surface. Citric acid, salt-flour-vinegar paste, TergazymeRTM, and water did not effectively remove the cyanoacrylate from the cartridge cases, but the solutions were safe to use on the brass and sometimes resulted in a shinier surface. Regardless of the cleaning method employed, the bloodstained bullets retained most or all of the underlying brown tarnish. Ultrasonication with sulfuric acid was successful at removing some blood-initiated tarnishing; however, the removal of residues was not complete, making it difficult

First-principle optimal local pseudopotentials construction via optimized effective potential method

International Nuclear Information System (INIS)

Mi, Wenhui; Zhang, Shoutao; Wang, Yanchao; Ma, Yanming; Miao, Maosheng

2016-01-01

The local pseudopotential (LPP) is an important component of orbital-free density functional theory, a promising large-scale simulation method that can maintain information on a material’s electron state. The LPP is usually extracted from solid-state density functional theory calculations, thereby it is difficult to assess its transferability to cases involving very different chemical environments. Here, we reveal a fundamental relation between the first-principles norm-conserving pseudopotential (NCPP) and the LPP. On the basis of this relationship, we demonstrate that the LPP can be constructed optimally from the NCPP for a large number of elements using the optimized effective potential method. Specially, our method provides a unified scheme for constructing and assessing the LPP within the framework of first-principles pseudopotentials. Our practice reveals that the existence of a valid LPP with high transferability may strongly depend on the element.

1D ferromagnetic edge contacts to 2D graphene/h-BN heterostructures

Science.gov (United States)

Karpiak, Bogdan; Dankert, André; Cummings, Aron W.; Power, Stephen R.; Roche, Stephan; Dash, Saroj P.

2018-03-01

We report the fabrication of one-dimensional (1D) ferromagnetic edge contacts to two-dimensional (2D) graphene/h-BN heterostructures. While aiming to study spin injection/detection with 1D edge contacts, a spurious magnetoresistance signal was observed, which is found to originate from the local Hall effect in graphene due to fringe fields from ferromagnetic edge contacts and in the presence of charge current spreading in the nonlocal measurement configuration. Such behavior has been confirmed by the absence of a Hanle signal and gate-dependent magnetoresistance measurements that reveal a change in sign of the signal for the electron- and hole-doped regimes, which is in contrast to the expected behavior of the spin signal. Calculations show that the contact-induced fringe fields are typically on the order of hundreds of mT, but can be reduced below 100 mT with careful optimization of the contact geometry. There may be an additional contribution from magnetoresistance effects due to tunneling anisotropy in the contacts, which needs further investigation. These studies are useful for optimization of spin injection and detection in 2D material heterostructures through 1D edge contacts.

Non-standard perturbative methods for the effective potential in λφ4 QFT

International Nuclear Information System (INIS)

Okopinska, A.

1986-07-01

The effective potential in scalar QFT is calculated in the non-standard perturbative methods and compared with the conventional loop expansion. In the space time dimensions 0 and 1 the results are compared with the ''exact'' effective potential obtained numerically. In 4 dimensions we show that λφ 4 theory is non-interacting. (author)

Explaining the Effectiveness of the Contrast Culture Method for Managing Interpersonal Interactions across Cultures

Science.gov (United States)

Hiratsuka, Hiroyoshi; Suzuki, Hanako; Pusina, Alexis

2016-01-01

One of the current challenges in the field of intercultural education comes from the limited availability of training efficacy studies. The present study focused on explaining the effectiveness of the Contrast Culture Method (CCM) as an intercultural education method for managing interpersonal interactions across cultures between graduate…

Effect of Multi-condition Training and Speech Enhancement Methods on Spoofing Detection

DEFF Research Database (Denmark)

Yu, Hong; Sarkar, Achintya Kumar; Thomsen, Dennis Alexander Lehmann

2016-01-01

enhancement methods on a state of-the-art spoofing detection system based on the dynamic linear frequency cepstral coefficients (LFCC) feature and a Gaussian mixture model maximum-likelihood (GMM-ML) classifier. In the experiment part we consider three additive noise types, Cantine, Babble and white Gaussian......Many researchers have demonstrated the good performance of spoofing detection systems under clean training and testing conditions. However, it is well known that the performance of speaker and speech recognition systems significantly degrades in noisy conditions. Therefore, it is of great interest...... to investigate the effect of noise on the performance of spoofing detection systems. In this paper, we investigate a multi-conditional training method where spoofing detection models are trained with a mix of clean and noisy data. In addition, we study the effect of different noise types as well as speech...

In vitro cost-effective methods to detect carbapenemases in Enterobacteriaceae

Directory of Open Access Journals (Sweden)

Varsha Gupta

2018-01-01

Full Text Available The rise in carbapenemases-producing organisms has challenged the scientific community. Infections caused by these bacteria have limited treatment options. There are various types such as Klebsiella pneumoniae carbapenemase (Ambler class A, metallo-beta-lactamases of VIM-type, IMP-type, NDM-type (Ambler class B, and OXA-48-types (Ambler class D. An efficient strategy for detection of carbapenemase producers is important to determine the appropriate therapeutic modalities. In this study, four methods - Carba NP test, modified Carba NP (MCNP test, carbapenem inactivation method (CIM test, and Rapidec Carba NP kit test were evaluated. We evaluated an in-house MCNP test to detect carbapenemase production using a single protocol which gave reliable results. Furthermore, CIM using routine antibiotic discs gives good results. Both these tests were found to be cost-effective.

Effect of cooling methods on hole quality in drilling of aluminium 6061-6T

International Nuclear Information System (INIS)

Islam, M N; Boswell, B

2016-01-01

The influence of cooling method and drilling parameters on hole production has been investigated experimentally and analytically by measuring the hole quality. A three-level, three-parameter experiment was conducted using design-of-experiment methodology. The three levels of independent input parameters were: for cooling method—flood drilling, minimum quantity lubrication (MQL) drilling and cryogenic drilling; for feed rate—0.2, 0.3 and 0.4 mm/rev; and for cutting speed—60, 75 and 100 m/min. The selected work and tool materials were aluminium 6061-6T and high speed steel (HSS), respectively. The measured output parameters were the three most widely used quality characteristics of drilled holes - diameter error, circularity and surface roughness. The results were analysed applying three methods: Pareto ANOVA, Taguchi method and traditional analysis. The findings revealed that the cooling method has a significant effect on diameter error (contribution ratio 88.27%), moderate effect on surface roughness (contribution ratio 41.74%) and relatively small effect on circularity (contribution ratio 23.64%). The best results for the dimensional accuracy and surface roughness were achieved by MQL drilling. Cryogenic drilling produced the best circularity results; however, in terms of dimensional accuracy and surface roughness it was the worst. (paper)

L{sub 1/2} regularization based numerical method for effective reconstruction of bioluminescence tomography

Energy Technology Data Exchange (ETDEWEB)

Chen, Xueli, E-mail: xlchen@xidian.edu.cn, E-mail: jimleung@mail.xidian.edu.cn; Yang, Defu; Zhang, Qitan; Liang, Jimin, E-mail: xlchen@xidian.edu.cn, E-mail: jimleung@mail.xidian.edu.cn [School of Life Science and Technology, Xidian University, Xi' an 710071 (China); Engineering Research Center of Molecular and Neuro Imaging, Ministry of Education (China)

2014-05-14

Even though bioluminescence tomography (BLT) exhibits significant potential and wide applications in macroscopic imaging of small animals in vivo, the inverse reconstruction is still a tough problem that has plagued researchers in a related area. The ill-posedness of inverse reconstruction arises from insufficient measurements and modeling errors, so that the inverse reconstruction cannot be solved directly. In this study, an l{sub 1/2} regularization based numerical method was developed for effective reconstruction of BLT. In the method, the inverse reconstruction of BLT was constrained into an l{sub 1/2} regularization problem, and then the weighted interior-point algorithm (WIPA) was applied to solve the problem through transforming it into obtaining the solution of a series of l{sub 1} regularizers. The feasibility and effectiveness of the proposed method were demonstrated with numerical simulations on a digital mouse. Stability verification experiments further illustrated the robustness of the proposed method for different levels of Gaussian noise.

THE EFFECT OF KANGAROO METHOD APPLICATION TO BODY TEMPERATURE OF BABY WITH LOW BIRTH WEIGHT (LBW)

OpenAIRE

Kadek Ayu Erika, Kadek Ayu Erika

2012-01-01

- Background: Low Birth Weight (LBW) care in Indonesia is still prioritizing the use of incubators but its presence is still very limited. Kangaroo method is now starting to be used as an alternative to incubator that is economically efficient and effective. Purpose: This study aimed to determine the effect of the application of the kangaroo method to body temperature of baby with LBW. Method: This research was conducted at the Hospital Prof. DR. W.Z. Johannes Kupang with a sample of 25 lo...

An Effective Fault Feature Extraction Method for Gas Turbine Generator System Diagnosis

Directory of Open Access Journals (Sweden)

Jian-Hua Zhong

2016-01-01

Full Text Available Fault diagnosis is very important to maintain the operation of a gas turbine generator system (GTGS in power plants, where any abnormal situations will interrupt the electricity supply. The fault diagnosis of the GTGS faces the main challenge that the acquired data, vibration or sound signals, contain a great deal of redundant information which extends the fault identification time and degrades the diagnostic accuracy. To improve the diagnostic performance in the GTGS, an effective fault feature extraction framework is proposed to solve the problem of the signal disorder and redundant information in the acquired signal. The proposed framework combines feature extraction with a general machine learning method, support vector machine (SVM, to implement an intelligent fault diagnosis. The feature extraction method adopts wavelet packet transform and time-domain statistical features to extract the features of faults from the vibration signal. To further reduce the redundant information in extracted features, kernel principal component analysis is applied in this study. Experimental results indicate that the proposed feature extracted technique is an effective method to extract the useful features of faults, resulting in improvement of the performance of fault diagnosis for the GTGS.

A comparative study on effect of e-learning and instructor-led methods on nurses' documentation competency.

Science.gov (United States)

Abbaszadeh, Abbas; Sabeghi, Hakimeh; Borhani, Fariba; Heydari, Abbas

2011-01-01

Accurate recording of the nursing care indicates the care performance and its quality, so that, any failure in documentation can be a reason for inadequate patient care. Therefore, improving nurses' skills in this field using effective educational methods is of high importance. Since traditional teaching methods are not suitable for communities with rapid knowledge expansion and constant changes, e-learning methods can be a viable alternative. To show the importance of e-learning methods on nurses' care reporting skills, this study was performed to compare the e-learning methods with the traditional instructor-led methods. This was a quasi-experimental study aimed to compare the effect of two teaching methods (e-learning and lecture) on nursing documentation and examine the differences in acquiring competency on documentation between nurses who participated in the e-learning (n = 30) and nurses in a lecture group (n = 31). The results of the present study indicated that statistically there was no significant difference between the two groups. The findings also revealed that statistically there was no significant correlation between the two groups toward demographic variables. However, we believe that due to benefits of e-learning against traditional instructor-led method, and according to their equal effect on nurses' documentation competency, it can be a qualified substitute for traditional instructor-led method. E-learning as a student-centered method as well as lecture method equally promote competency of the nurses on documentation. Therefore, e-learning can be used to facilitate the implementation of nursing educational programs.

Nonlinear response time-dependent density functional theory combined with the effective fragment potential method

Energy Technology Data Exchange (ETDEWEB)

Zahariev, Federico; Gordon, Mark S., E-mail: mark@si.msg.chem.iastate.edu [Department of Chemistry, Iowa State University, Ames, Iowa 50011 (United States)

2014-05-14

This work presents an extension of the linear response TDDFT/EFP method to the nonlinear-response regime together with the implementation of nonlinear-response TDDFT/EFP in the quantum-chemistry computer package GAMESS. Included in the new method is the ability to calculate the two-photon absorption cross section and to incorporate solvent effects via the EFP method. The nonlinear-response TDDFT/EFP method is able to make correct qualitative predictions for both gas phase values and aqueous solvent shifts of several important nonlinear properties.

The Effect of Coordinated Teaching Method Practices on Some Motor Skills of 6-Year-Old Children

Science.gov (United States)

Altinkok, Mustafa

2017-01-01

Purpose: This study was designed to examine the effects of Coordinated Teaching Method activities applied for 10 weeks on 6-year-old children, and to examine the effects of these activities on the development of some motor skills in children. Research Methods: The "Experimental Research Model with Pre-test and Post-test Control Group"…

Method of calculation overall equipment effectiveness in fertilizer factory

Science.gov (United States)

Siregar, I.; Muchtar, M. A.; Rahmat, R. F.; Andayani, U.; Nasution, T. H.; Sari, R. M.

2018-02-01

This research was conducted at a fertilizer company in Sumatra, where companies that produce fertilizers in large quantities to meet the needs of consumers. This company cannot be separated from issues related to the performance/effectiveness of the machinery and equipment. It can be seen from the engine that runs every day without a break resulted in not all of the quality of products in accordance with the quality standards set by the company. Therefore, to measure and improve the performance of the machine in the unit Plant Urea-1 as a whole then used method of Overall Equipment Effectiveness (OEE), which is one important element in the Total Productive Maintenance (TPM) to measure the effectiveness of the machine so that it can take measures to maintain that level. In July, August and September OEE values above the standard set at 85%. Meanwhile, in October, November and December have not reached the standard OEE values. The low value of OEE due to lack of time availability of machines for the production shut down due to the occurrence of the engine long enough so that the availability of reduced production time.

Effect of caffeine ingestion on anaerobic capacity quantified by different methods

Science.gov (United States)

Arcoverde, Lucyana; Silveira, Rodrigo; Tomazini, Fabiano; Sansonio, André; Bertuzzi, Romulo; Andrade-Souza, Victor Amorim

2017-01-01

We investigated whether caffeine ingestion before submaximal exercise bouts would affect supramaximal oxygen demand and maximal accumulated oxygen deficit (MAOD), and if caffeine-induced improvement on the anaerobic capacity (AC) could be detected by different methods. Nine men took part in several submaximal and supramaximal exercise bouts one hour after ingesting caffeine (5 mg·kg-1) or placebo. The AC was estimated by MAOD, alternative MAOD, critical power, and gross efficiency methods. Caffeine had no effect on exercise endurance during the supramaximal bout (caffeine: 131.3 ± 21.9 and placebo: 130.8 ± 20.8 s, P = 0.80). Caffeine ingestion before submaximal trials did not affect supramaximal oxygen demand and MAOD compared to placebo (7.88 ± 1.56 L and 65.80 ± 16.06 kJ vs. 7.89 ± 1.30 L and 62.85 ± 13.67 kJ, P = 0.99). Additionally, MAOD was similar between caffeine and placebo when supramaximal oxygen demand was estimated without caffeine effects during submaximal bouts (67.02 ± 16.36 and 62.85 ± 13.67 kJ, P = 0.41) or when estimated by alternative MAOD (56.61 ± 8.49 and 56.87 ± 9.76 kJ, P = 0.91). The AC estimated by gross efficiency was also similar between caffeine and placebo (21.80 ± 3.09 and 20.94 ± 2.67 kJ, P = 0.15), but was lower in caffeine when estimated by critical power method (16.2 ± 2.6 vs. 19.3 ± 3.5 kJ, P = 0.03). In conclusion, caffeine ingestion before submaximal bouts did not affect supramaximal oxygen demand and consequently MAOD. Otherwise, caffeine seems to have no clear positive effect on AC. PMID:28617848

High precision micro-scale Hall Effect characterization method using in-line micro four-point probes

DEFF Research Database (Denmark)

Petersen, Dirch Hjorth; Hansen, Ole; Lin, Rong

2008-01-01

Accurate characterization of ultra shallow junctions (USJ) is important in order to understand the principles of junction formation and to develop the appropriate implant and annealing technologies. We investigate the capabilities of a new micro-scale Hall effect measurement method where Hall...... effect is measured with collinear micro four-point probes (M4PP). We derive the sensitivity to electrode position errors and describe a position error suppression method to enable rapid reliable Hall effect measurements with just two measurement points. We show with both Monte Carlo simulations...... and experimental measurements, that the repeatability of a micro-scale Hall effect measurement is better than 1 %. We demonstrate the ability to spatially resolve Hall effect on micro-scale by characterization of an USJ with a single laser stripe anneal. The micro sheet resistance variations resulting from...

The Effect of Montessori Method on Cognitive Tempo of Kindergarten Children

Science.gov (United States)

Kayili, Gökhan

2018-01-01

This study was undertaken to discover the effect of the Montessori Method on the cognitive tempo of 4-5-year-old children. Using an experimental pre-test-post-test paired control group design, the study sample included 60 children attending Ihsan Dogramaci Applied Nursery School (affiliated to Selcuk University, Department of Health Sciences) in…

Evaluation of machining effect for the residual stress of SA508 by hole drilling method

International Nuclear Information System (INIS)

Lee, Jeong Kun; Lee, Kyoung Soo; Song, Ki O; Kim, Young Shin

2009-01-01

Residual stresses on a surface of the material are welcome or undesirable since it's direction, compression or tensile. But especially for the fatigue, it is not negligible effect on the material strength. These residual stresses developed during the manufacturing processes involving material deformation, heat treatment, machining. The object of this paper is verifying the effect of machining what is mostly used for SA508. For verifying the effect of machining, three different kind of machining have been achieved, milling, grinding, wire cutting. Also to measure the residual stress, hole drill method and indentation method are used.

Cost effectiveness of methods for removing radium and thorium in uranium mining

International Nuclear Information System (INIS)

Rogers, V.C.; Nielson, K.K.

1981-01-01

The potential health impact from uranium milling operations is mainly associated with long-term releases of radioactive contaminants from the mill tailings. The major mechanisms for mitigating these potential releases focus on increasing the tailings containment with the addition of migration barriers such as thick earthern covers and clay liners. Some limited investigation has also focused on reducing the radionuclide source terms. This alternative approach has some desirable features, but stringent cost requirements are placed upon source removal methods in order for them to be economically favorable. A cost effectiveness evaluation is presented herein, in which costs for containment methods are used to establish maximum cost guidelines for the source removal methods

Effect of mixing methods and aggregate type on strength of hardened concrete

International Nuclear Information System (INIS)

Elhadi, S.

2006-01-01

The objective of the research contained in this paper is to study the effect on strength of concrete which can be caused by changing method of concrete mix with or without changing aggregate crushing value under hand or mechanical compaction, and to compare results obtained when nondestructive testing techniques are used. It has been found that all methods of mix design are nearly identical in predicting the strength under a known value of w/c ratio. Up to strength of about 30 N/mm 2 , hand and mechanical compaction seems to be identical in all methods of concrete mixing. Important results regarding destructive and non-destructive testing has been drawn from the study.(Author)

The nuclear industry in transition: Methods and effects of cross training

International Nuclear Information System (INIS)

Starrett, D.M.; Wilczek, T.A.; Armstrong, D.L.

1996-01-01

As DOE facilities transition from defense programs to environmental management, cross training is becoming increasingly important as an essential component of change management. When applied to those specific segments of nuclear industry undergoing transition, cross training methods can be especially effective. Use of methodologies such as team approach, change agents, strategic plans, operations plans, specific training, and formal transition techniques can generate many positive benefits to the industry. This paper explores the benefits of cross training, proposes methodology for use when developing cross training for the transition of employees from DOE defense programs to environmental projects, and provides two examples of successful implementation of cross training methods

Burn cycle study of tokamak power plants by the Effective Management Method

International Nuclear Information System (INIS)

Okano, Kunihiko; Inoue, Nobuyuki; Ogawa, Yuichi; Yoshida, Zensho

1995-01-01

The Effective Management Method is an action decision manner to work out the strategy of enterprises, which was developed in Japan on the base of the Kepner and Trigoe Method developed in the USA. The authors applied this method with a small modification to a burn cycle study of tokamak power plants. The numerical figure of merit for the pulsed and steady state operations are visually shown. Steady state, 1 hour pulse (with and without energy reservoir) and half-day long pulse reactor are compared. The EM method provides a common base for such comparing study. The highest score is given to an 1 hour pulsed operated reactor with an energy reservoir for the continuous electric output. However it is also pointed out that there is no 'significant' superiority in both of the steady state and pulse reactors. (author)

Double Compton effect: a new method of detection

International Nuclear Information System (INIS)

Cafagne, A.

1978-01-01

In this paper, a new method of observation of the double Compton effect is described. The proposed method is based on the use of a sum-coincidence circuit, whose resulting pulse is in a fast coincidence (ζ=1,7x10 -8 sec) with pulses (∼=10- 9 sec) from both scintillation detectors used to measure the energy of the coincident scattered gamma-rays. By means of this procedure, the contribution of the pulses from the sum-coincidence circuit due to random gamma-rays is eliminated. The spectra were registered in an Ortec model 6240 Multi-channel analyser using a further coincidence circuit, eliminate non-coincident pulses. The gate is open by a rectangulasr pulse which lasts for 10n sec and an adjustable delayed pulse generator adjusts its time-position in order to be coincident with the top of the sum-coincidence pulses. The adjustable delayed pulse generator compensates also for the finite time of propagation of the pulses in the circuits. Through this experimental technique it was possible to measure simultaneously the energy of each coincident photon which allowed an excellent comparison due the agreement found between the obtained results and the theory of Mandl and Skyrme. (Author) [pt

Effects of Feature Extraction and Classification Methods on Cyberbully Detection

OpenAIRE

ÖZEL, Selma Ayşe; SARAÇ, Esra

2016-01-01

Cyberbullying is defined as an aggressive, intentional action against a defenseless person by using the Internet, or other electronic contents. Researchers have found that many of the bullying cases have tragically ended in suicides; hence automatic detection of cyberbullying has become important. In this study we show the effects of feature extraction, feature selection, and classification methods that are used, on the performance of automatic detection of cyberbullying. To perform the exper...

A method to eliminate the effect of radiation on thermocouple performance

International Nuclear Information System (INIS)

Ali, Fawaz; Lu Lixuan

2007-01-01

In-core temperature measurements are pivotal in maintaining nuclear reactors in a safe state of operation. Thermocouples serve as the liaison in ensuring this safe state. The realization of the thermocouple's full potential is hindered by the fact that thermocouples cannot be situated in areas with high radiation fields. Radiation has the potential of generating voltages in the thermocouple wires, hence producing an error in the temperature transmitter output. In this paper, a mathematical model is developed to quantify the effect that radiation from the Canada Deuterium Uranium (CANDU) Nuclear Power Plants (NPPs) has on the thermocouple temperature reading. Subsequently, a method to offset the effect of radiation on the thermocouple is proposed. Simulation is performed to verify the effectiveness of the proposed system

The effect of mixing method on tricalcium silicate-based cement.

Science.gov (United States)

Duque, J A; Fernandes, S L; Bubola, J P; Duarte, M A H; Camilleri, J; Marciano, M A

2018-01-01

To evaluate the effect of three methods of mixing on the physical and chemical properties of tricalcium silicate-based cements. The materials evaluated were MTA Angelus and Portland cement with 20% zirconium oxide (PC-20-Zr). The cements were mixed using a 3 : 1 powder-to-liquid ratio. The mixing methods were manual (m), trituration (tr) and ultrasonic (us) activation. The materials were characterized by means of scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy. Flowability was analysed according to ANSI/ADA 57/2012. Initial and final setting times were assessed following ASTM C266/08. Volume change was evaluated using a micro-CT volumetric method. Solubility was analysed according to ADA 57/2012. pH and calcium ion release were measured after 3, 24, 72 and 168 h. Statistical analysis was performed using two-way analysis of variance. The level of significance was set at P = 0.05. The SEM analysis revealed that ultrasonic activation was associated with a homogeneous distribution of particles. Flowability, volume change and initial setting time were not influenced by the mixing method (P > 0.05). Solubility was influenced by the mixing method (P < 0.05). For pH, at 168 h, significant differences were found between MTA-m and PC-20-Zr-m (P < 0.05). For calcium ion release, PC-20-Zr-tr had higher values than MTA-m at 3 h, and MTA-tr had higher values than PC-20-Zr-m at 168 h (P < 0.05). The ultrasonic and trituration methods led to higher calcium ion release and pH compared with manual mixing for all cements, whilst the ultrasonic method produced smaller particles for the PC-20-Zr cement. Flow, setting times and volume change were not influenced by the mixing method used; however, it did have an impact on solubility. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Evaluating mediation and moderation effects in school psychology: A presentation of methods and review of current practice

OpenAIRE

Fairchild, Amanda J.; McQuillin, Samuel D.

2010-01-01

Third variable effects elucidate the relation between two other variables, and can describe why they are related or under what conditions they are related. This article demonstrates methods to analyze two third-variable effects: moderation and mediation. The utility of examining moderation and mediation effects in school psychology is described and current use of the analyses in applied school psychology research is reviewed and evaluated. Proper statistical methods to test the effects are pr...

Agglomeration of Celecoxib by Quasi Emulsion Solvent Diffusion Method: Effect of Stabilizer

Directory of Open Access Journals (Sweden)

Maryam Maghsoodi

2016-12-01

Full Text Available Purpose: The quasi-emulsion solvent diffusion (QESD has evolved into an effective technique to manufacture agglomerates of API crystals. Although, the proposed technique showed benefits, such as cost effectiveness, that is considerably sensitive to the choice of a stabilizer, which agonizes from a absence of systemic understanding in this field. In the present study, the combination of different solvents and stabilizers were compared to investigate any connections between the solvents and stabilizers. Methods: Agglomerates of celecoxib were prepared by QESD method using four different stabilizers (Tween 80, HPMC, PVP and SLS and three different solvents (methyl acetate, ethyl acetate and isopropyl acetate. The solid state of obtained particles was investigated by differential scanning calorimetry (DSC and Fourier transform infrared (FT-IR spectroscopy. The agglomerated were also evaluated in term of production yield, distribution of particles and dissolution behavior. Results: The results showed that the effectiveness of stabilizer in terms of particle size and particle size distribution is specific to each solvent candidate. A stabilizer with a lower HLB value is preferred which actually increased its effectiveness with the solvent candidates with higher lipophilicity. HPMC appeared to be the most versatile stabilizer because it showed a better stabilizing effect compared to other stabilizers in all solvents used. Conclusion: This study demonstrated that the efficiency of stabilizers in forming the celecoxib agglomerates by QESD was influenced by the HLB of the stabilizer and lipophilicity of the solvents.

Effect of heating method on stress-rupture life

Science.gov (United States)

Bizon, P. T.; Calfo, F. D.

1977-01-01

The effect of radiant(furnace), resistance(electric current), burner(hot gas stream), and a combination of resistance and burner heating on intermediate time (100 to 300 hr) stress-rupture life and reduction of area was evaluated. All heating methods were studied using the nickel-based alloy Udimet 700 while all but burner heating were evaluated with the cobalt-based alloy Mar-M 509. Limited test results of eight other superalloys were also included in this study. Resistance heated specimens had about 20 to 30 percent of the stress-rupture life of radiant heated specimens. The limited burner heating data showed about a 50 percent life reduction as compared to the radiant heated tests. A metallurgical examination gave no explanation for these reductions.

Improved method for considering PMU’s uncertainty and its effect on real-time stability assessment methods based on Thevenin equivalent

DEFF Research Database (Denmark)

Perez, Angel; Jóhannsson, Hjörtur; Østergaard, Jacob

2015-01-01

This article characterizes experimentally the relation between phase and magnitude error from Phasor Measurement Units (PMU) in steady state and study its effect on real-time stability assessment methods. This is achieved by a set of laboratory tests applied to four different devices, where...... a bivariate Gaussian mixture distribution was used to represent the error, obtained experimentally, and later include it in the synthesized PMU measurement using the Monte Carlo Method. Two models for including uncertainty are compared and the results show that taking into account the correlation between...

The Effect of Language Teaching Methods on Academic Success in Turkey

Science.gov (United States)

Ökmen, Burcu; Kilic, Abdurrahman

2016-01-01

The aim of this research is to observe the effect of language teaching methods on students' TEOG foreign language exams, the exam which is necessary to pass from secondary school to high school, administered by the Ministry of Education. The research sample consisted of 95 English teachers who taught in secondary schools in Duzce in 2013-2014, and…

Casimir effect in a d-dimensional flat spacetime and the cut-off method

International Nuclear Information System (INIS)

Svaiter, N.F.; Svaiter, B.F.

1989-01-01

The CasiMir efeect in a D-dimensional spacetime produced by a Hermitian massless scalar field in the presence of a pair of perfectly reflecting parallel flat plates is discussed. The exponential cut-off regularization method is employed. The regularized vacuum energy and the Casimir energy of this field are evaluated and a detailed analysis of the divergent terms in the regularized vacuum energy is carried out. The two-dimensional version of the Casimir effect is discussed by means of the same cut-off method. A comparison between the above method and the zeta function regularization procedure is presented in a way which gives the unification between these two methods in the present case. (author) [pt

Effects of core sealing methods on the preservation of pore water

International Nuclear Information System (INIS)

Striffler, P.; Peters, C.A.

1993-01-01

Five general core sealing methods (using Protecore, Lexan, wax, Protecore with wax, and Protecore with Lexan) were studied over a two year period to determine their moisture retention capabilities. Results indicate that the multibarrier methods (Protecore with wax and Protecore with Lexan) and the single barrier methods (Protecore and wax) provide successful means of retaining moisture in cores. Additional testing indicated that a tight wrap of Saran is effective in: (1) protecting the outer vapor barriers from puncture, (2) containing any condensate in close proximity to where it was condensed, and (3) retarding condensation. Tests conducted to determine the moisture adsorption potential of wax and the use of applying a positive or negative pressure to Protecore packets proved inconclusive, but warrant further investigation. The importance of proper and timely handling of core samples in the field, including refrigeration and weighing of samples, can not be overstated

Effects of different tillage and transplanting methods on rice rooting ability

International Nuclear Information System (INIS)

Ren Wanjun; Yang Wenyu; Fan Gaoqiong; Wu Jinxiu; Wang Lihong

2007-01-01

Effects of different tillage and transplanting methods on rice rooting ability were studied with the methods of water culture and 3 H labeling. The results showed that the dynamic curve of rooting ability had single peak during growth period, and the peak of root length per plant, root number and root dry weight appeared at booting. With conventional tillage and transplanting method, the rice plant had the strongest rooting ability, under non-tillage treatment (BCSNT), the rooting ability was the lowest during elongating to heading. After 10d of heading, the dry weight and 3 H specific activity of BCSNT was higher than other treatments, at the same time, the percentage of 3 H assimilate at new root was the highest. Dry weight was positively correlated with percentage of 3 H assimilate of new root, while negatively with percentage of 3 H assimilate of panicle. (authors)

Effects of core sealing methods on the preservation of pore water

Science.gov (United States)

Striffler, Pete; Peters, Charles A.

1993-01-01

Five general core sealing methods (using Protecore, Lexan, wax, Protecore with wax, and Protecore with Lexan) were studied over a two year period to determine their moisture retention capabilities. Results indicate that the multibarrier methods (Protecore with wax and Protecore with Lexan) and the single barrier methods (Protecore and wax) provide successful means of retaining moisture in cores. Additional testing indicated that a tight wrap of Saran is effective in: 1) protecting the outer vapor barriers from puncture, 2) containing any condensate in close proximity to where it was condensed, and 3) retarding condensation. Tests conducted to determine the moisture adsorption potential of wax and the use of applying a positive or negative pressure to Protecore packets proved inconclusive, but warrant further investigation. The importance of proper and timely handling of core samples in the field, including refrigeration and weighing of samples, can not be overstated.

Comparison of cell homogenization methods considering interaction effect between fuel cells and control rod cells

International Nuclear Information System (INIS)

Takeda, T.; Uto, N.

1988-01-01

Several methods to determine cell-averaged group cross sections and anisotropic diffusion coefficients which consider the interaction effect between core fuel cells and control rods or control rod followers have been compared to discuss the physical meaning included in cell homogenization. As the cell homogenization methods considered are the commonly used flux-weighting method, the reaction rate preservation method and the reactivity preservation method. These homogenization methods have been applied to control rod worth calculations in 1-D slab cores to investigate their applicability. (author). 6 refs, 2 figs, 9 tabs

Automated extinction monitor for the NLOT site survey

Science.gov (United States)

Kumar Sharma, Tarun

In order to search a few potential sites for the National Large Optical Telescope (NLOT) project, we have initiated a site survey program. Since, most of instruments used for the site survey are custom made, we also started developing our own site characterization instruments. In this process we have designed and developed a device called Automated Extinction Monitor (AEM) and installed the same at IAO, Hanle. The AEM is a small wide field robotic telescope, dedicated to record atmospheric extinction in one or more photometric bands. It gives very accurate statistics of the distribution of photometric nights. In addition to this, instrument also provides the measurement of sky brightness. Here we briefly describe overall instrument and initial results obtained.

Statistical methods for determining the effect of mammography screening

DEFF Research Database (Denmark)

Lophaven, Søren

2016-01-01

In an overview of five randomised controlled trials from Sweden, a reduction of 29% was found in breast cancer mortality in women aged 50-69 at randomisation after a follow up of 5-13 years. Organised, population based, mammography service screening was introduced on the basis of these resultsin...... in 2007-2008. Women aged 50-69 were invited to screening every second year. Taking advantage of the registers of population and health, we present statistical methods for evaluating the effect of mammography screening on breast cancer mortality (Olsen et al. 2005, Njor et al. 2015 and Weedon-Fekjær etal...

A side-effect free method for identifying cancer drug targets.

Science.gov (United States)

Ashraf, Md Izhar; Ong, Seng-Kai; Mujawar, Shama; Pawar, Shrikant; More, Pallavi; Paul, Somnath; Lahiri, Chandrajit

2018-04-27

Identifying effective drug targets, with little or no side effects, remains an ever challenging task. A potential pitfall of failing to uncover the correct drug targets, due to side effect of pleiotropic genes, might lead the potential drugs to be illicit and withdrawn. Simplifying disease complexity, for the investigation of the mechanistic aspects and identification of effective drug targets, have been done through several approaches of protein interactome analysis. Of these, centrality measures have always gained importance in identifying candidate drug targets. Here, we put forward an integrated method of analysing a complex network of cancer and depict the importance of k-core, functional connectivity and centrality (KFC) for identifying effective drug targets. Essentially, we have extracted the proteins involved in the pathways leading to cancer from the pathway databases which enlist real experimental datasets. The interactions between these proteins were mapped to build an interactome. Integrative analyses of the interactome enabled us to unearth plausible reasons for drugs being rendered withdrawn, thereby giving future scope to pharmaceutical industries to potentially avoid them (e.g. ESR1, HDAC2, F2, PLG, PPARA, RXRA, etc). Based upon our KFC criteria, we have shortlisted ten proteins (GRB2, FYN, PIK3R1, CBL, JAK2, LCK, LYN, SYK, JAK1 and SOCS3) as effective candidates for drug development.

Study on evaluation method for potential effect of natural phenomena on a HLW disposal system

International Nuclear Information System (INIS)

Kawamura, Makoto; Makino, Hitoshi; Umeda, Koji; Osawa, Hideaki; Seo, Toshihiro; Ishimaru, Tsuneaki

2005-01-01

Evaluation for the potential effect of natural phenomena on a HLW disposal system is an important issue in safety assessment. A scenario construction method for the effects on a HLW disposal system condition and performance has been developed for two purposes: the first being effective elicitation and organization of information from investigators of natural phenomena and performance assessor and the second being, maintenance of traceability of scenario construction processes with suitable records. In this method, a series of works to construct scenarios is divided into pieces to facilitate and to elicit the features of potential effect of natural phenomena on a HLW disposal system and is organized to create reasonable scenarios with consistency, traceability and adequate conservativeness within realistic view. (author)

Effectiveness of methods for reducing acrylamide in bakery products.

Science.gov (United States)

Sadd, Peter A; Hamlet, Colin G; Liang, Li

2008-08-13

Pilot-scale bread, biscuit, and cracker doughs have been baked to assess how well recipe changes could reduce acrylamide in commercial bakery products. Removing ammonium-based raising agents was beneficial in biscuits. In doughs, long yeast fermentations were an effective way of reducing asparagine levels and hence acrylamide. At moderate fermentation times fructose levels increased, but the yeast later absorbed this, so the net effect on acrylamide was beneficial. Metal ions such as calcium reduced acrylamide when added as the carbonate or chloride. Hence, the fortification of flour with calcium carbonate, over and above its natural mineral content, has an additional benefit. However, some other possible methods of adding calcium to bakery doughs, for example, via the permitted preservative calcium propionate, were not beneficial. Amino acid addition to doughs gave modest reductions in acrylamide. Lowering the dough pH reduced acrylamide, but at the expense of higher levels of other process contaminants such as 3-monochloropropane-1,2-diol (3-MCPD).

Methods That Matter: Integrating Mixed Methods for More Effective Social Science Research

Science.gov (United States)

Hay, M. Cameron, Ed.

2016-01-01

To do research that really makes a difference--the authors of this book argue--social scientists need questions and methods that reflect the complexity of the world. Bringing together a consortium of voices across a variety of fields, "Methods that Matter" offers compelling and successful examples of mixed methods research that do just…

A CTSA Agenda to Advance Methods for Comparative Effectiveness Research

Science.gov (United States)

Helfand, Mark; Tunis, Sean; Whitlock, Evelyn P.; Pauker, Stephen G.; Basu, Anirban; Chilingerian, Jon; Harrell Jr., Frank E.; Meltzer, David O.; Montori, Victor M.; Shepard, Donald S.; Kent, David M.

2011-01-01

Abstract Clinical research needs to be more useful to patients, clinicians, and other decision makers. To meet this need, more research should focus on patient‐centered outcomes, compare viable alternatives, and be responsive to individual patients’ preferences, needs, pathobiology, settings, and values. These features, which make comparative effectiveness research (CER) fundamentally patient‐centered, challenge researchers to adopt or develop methods that improve the timeliness, relevance, and practical application of clinical studies. In this paper, we describe 10 priority areas that address 3 critical needs for research on patient‐centered outcomes (PCOR): (1) developing and testing trustworthy methods to identify and prioritize important questions for research; (2) improving the design, conduct, and analysis of clinical research studies; and (3) linking the process and outcomes of actual practice to priorities for research on patient‐centered outcomes. We argue that the National Institutes of Health, through its clinical and translational research program, should accelerate the development and refinement of methods for CER by linking a program of methods research to the broader portfolio of large, prospective clinical and health system studies it supports. Insights generated by this work should be of enormous value to PCORI and to the broad range of organizations that will be funding and implementing CER. Clin Trans Sci 2011; Volume 4: 188–198 PMID:21707950

Heavy Metal Polluted Soils: Effect on Plants and Bioremediation Methods

Directory of Open Access Journals (Sweden)

G. U. Chibuike

2014-01-01

Full Text Available Soils polluted with heavy metals have become common across the globe due to increase in geologic and anthropogenic activities. Plants growing on these soils show a reduction in growth, performance, and yield. Bioremediation is an effective method of treating heavy metal polluted soils. It is a widely accepted method that is mostly carried out in situ; hence it is suitable for the establishment/reestablishment of crops on treated soils. Microorganisms and plants employ different mechanisms for the bioremediation of polluted soils. Using plants for the treatment of polluted soils is a more common approach in the bioremediation of heavy metal polluted soils. Combining both microorganisms and plants is an approach to bioremediation that ensures a more efficient clean-up of heavy metal polluted soils. However, success of this approach largely depends on the species of organisms involved in the process.

Evaluating mediation and moderation effects in school psychology: a presentation of methods and review of current practice.

Science.gov (United States)

Fairchild, Amanda J; McQuillin, Samuel D

2010-02-01

Third variable effects elucidate the relation between two other variables, and can describe why they are related or under what conditions they are related. This article demonstrates methods to analyze two third-variable effects: moderation and mediation. The utility of examining moderation and mediation effects in school psychology is described and current use of the analyses in applied school psychology research is reviewed and evaluated. Proper statistical methods to test the effects are presented, and different effect size measures for the models are provided. Extensions of the basic moderator and mediator models are also described.

EFFECT OF DIFFERENT PHYSICAL ACTIVITY TRAINING METHODS ON OVERWEIGHT ADOLESCENTS

Directory of Open Access Journals (Sweden)

Shohreh Ghatrehsamani

2010-11-01

Full Text Available BACKGROUND: In view of the growing trend of obesity around the world, including in our country, and the effect of reduced physical activity in increasing the incidence of obesity and overweight in children and adolescents and limitations of families in providing transport for their children to attend exercise classes, as well as time limitations of students in taking part in these classes, accessing appropriate methods for presenting physical activity training seems essential.    METHODS: This non-pharmacological clinical trial was performed during six months from May to November 2007 on 105 children and adolescents aged 6-18 years with obesity, randomly assigned to 3 groups of thirty-five. Nutrition and treatment behavior were the same in all groups, but physical activity training in the first group was taking part in physical activity training classes twice a week, in the second group by providing a training CD, and in the third group via face-to-face training. Before and after the intervention, anthropometric indicators were measured and recorded.    RESULTS: Mean body mass index (BMI of participants in group attended physical activity training classes, and in the group undergone training with CD, after the interventions was significantly lower than that before the intervention.     CONCLUSION: Our findings demonstrated that training using CDs can also be effective in reducing BMI in overweight and obese children and adolescents as much as face-to-face education and participation in physical training classes. Extending such interventions can be effective at the community level.      Keywords: Children, adolescents, physical activity, education, obesity, treatment.

Renormalization-scheme-invariant QCD and QED: The method of effective charges

International Nuclear Information System (INIS)

Grunberg, G.

1984-01-01

We review, extend, and give some further applications of a method recently suggested to solve the renormalization-scheme-dependence problem in perturbative field theories. The use of a coupling constant as a universal expansion parameter is abandoned. Instead, to each physical quantity depending on a single scale variable is associated an effective charge, whose corresponding Stueckelberg--Peterman--Gell-Mann--Low function is identified as the proper object on which perturbation theory applies. Integration of the corresponding renormalization-group equations yields renormalization-scheme-invariant results free of any ambiguity related to the definition of the kinematical variable, or that of the scale parameter Λ, even though the theory is not solved to all orders. As a by-product, a renormalization-group improvement of the usual series is achieved. Extension of these methods to operators leads to the introduction of renormalization-group-invariant Green's function and Wilson coefficients, directly related to effective charges. The case of nonzero fermion masses is discussed, both for fixed masses and running masses in mass-independent renormalization schemes. The importance of the scale-invariant mass m is emphasized. Applications are given to deep-inelastic phenomena, where the use of renormalization-group-invariant coefficient functions allows to perform the factorization without having to introduce a factorization scale. The Sudakov form factor of the electron in QED is discussed as an example of an extension of the method to problems involving several momentum scales

Characterization of Fabricated Photonic Crystal Fibers Using Effective Index Method

OpenAIRE

Faramarz E. Seraji

2009-01-01

In this paper, the characteristics of photonic crystal fibers (PCFs), which have been experimentally determined in the last few years in Iran's Telecom Research Center are analyzed and compared theoretically using an effective index method. The PCFs under investigation are fabricated with a high speed drawing process that has not yet been reported elsewhere. It was shown that at higher wavelengths in PCFs; the light field is confined in the core where in shorter wavelengths the field spread...

Direct reconstruction of the effective atomic number of materials by the method of multi-energy radiography

International Nuclear Information System (INIS)

Naydenov, Sergey V.; Ryzhikov, Vladimir D.; Smith, Craig F.

2004-01-01

A direct method is proposed for reconstruction of the effective atomic number by means of multi-energy radiography of the material. The accuracy of the method is up to 95%. Advantages over conventional radiographic methods, which ensure accuracy of just about 50%, are discussed. A physical model has been constructed and general expressions have been obtained for description of the effective atomic number in a two-energy monitoring scheme. A universal dependence has been predicted for the effective atomic number as a function of relative (two-energy) radiographic reflex. The established theoretical law is confirmed by the experimental data presented. The proposed development can find multiple applications in non-destructive testing and related fields, including those in the civil sphere as well as anti-terrorist activities

Direct reconstruction of the effective atomic number of materials by the method of multi-energy radiography

Science.gov (United States)

Naydenov, Sergey V.; Ryzhikov, Vladimir D.; Smith, Craig F.

2004-02-01

A direct method is proposed for reconstruction of the effective atomic number by means of multi-energy radiography of the material. The accuracy of the method is up to 95%. Advantages over conventional radiographic methods, which ensure accuracy of just about 50%, are discussed. A physical model has been constructed and general expressions have been obtained for description of the effective atomic number in a two-energy monitoring scheme. A universal dependence has been predicted for the effective atomic number as a function of relative (two-energy) radiographic reflex. The established theoretical law is confirmed by the experimental data presented. The proposed development can find multiple applications in non-destructive testing and related fields, including those in the civil sphere as well as anti-terrorist activities.

Laboratory research on tailings stabilization methods and their effectiveness in radiation containment

International Nuclear Information System (INIS)

Macbeth, P.J.; Jensen, C.M.; Rogers, V.C.; Overmyer, R.F.

1978-04-01

This report describes a study of various methods, techniques, and materials for stabilizing uranium mill tailings to reduce radon exhalation. Radon emanation from tailings particles, radon exhalation from tailings, and methods that could be used to reduce radon exhalation from tailings piles are discussed. Surface radon flux and soil gas concentrations were measured in experiment chambers or columns consisting of uranium tailings and various types and thicknesses of cover materials. The applicability of diffusion theory was examined and effective diffusion coefficients were determined for clay, soil, and sand. The variation of radon flux with atmospheric effects and moisture also was investigated. The effectiveness of several types of chemical stabilizers for both volumetric and surface application in reducing radon exhalation is reported. Some volumetric stabilizers reduced radon flux by 90 percent or more. Radon flux was determined through the use of charcoal gas mask canisters, and flux accumulation chambers sampled by Lucas cells. Both of these techniques are described. Soil gas concentration was sampled with Lucas cells and counted with a sodium iodide scintillation spectrometer system. Emanating power of uranium tailings was measured for several particle sizes and found to be relatively constant at about 20 percent. Two types of grasses were found that would grow in tailings if sufficient water and fertilizer were provided. The effect of vegetation on radon exhalation was not determined

Classical Wigner method with an effective quantum force: application to reaction rates.

Science.gov (United States)

Poulsen, Jens Aage; Li, Huaqing; Nyman, Gunnar

2009-07-14

We construct an effective "quantum force" to be used in the classical molecular dynamics part of the classical Wigner method when determining correlation functions. The quantum force is obtained by estimating the most important short time separation of the Feynman paths that enter into the expression for the correlation function. The evaluation of the force is then as easy as classical potential energy evaluations. The ideas are tested on three reaction rate problems. The resulting transmission coefficients are in much better agreement with accurate results than transmission coefficients from the ordinary classical Wigner method.

An accelerated hybrid TLM-IE method for the investigation of shielding effectiveness

Directory of Open Access Journals (Sweden)

N. Fichtner

2010-09-01

Full Text Available A hybrid numerical technique combining time-domain integral equations (TD-IE with the transmission line matrix (TLM method is presented for the efficient modeling of transient wave phenomena. This hybrid method allows the full-wave modeling of circuits in the time-domain as well as the electromagnetic coupling of remote TLM subdomains using integral equations (IE. By using the integral equations the space between the TLM subdomains is not discretized and consequently doesn't contribute to the computational effort. The cost for the evaluation of the time-domain integral equations (TD-IE is further reduced using a suitable plane-wave representation of the source terms. The hybrid TD-IE/TLM method is applied in the computation of the shielding effectiveness (SE of metallic enclosures.

New method to measure the angular antispring effect in a Fabry–Perot cavity with remote excitation using radiation pressure

Energy Technology Data Exchange (ETDEWEB)

Nagano, Koji, E-mail: knagano@icrr.u-tokyo.ac.jp [Institute for Cosmic Ray Research, The University of Tokyo, 5-1-5 Kashiwa-no-Ha, Kashiwa, Chiba 277-8582 (Japan); Enomoto, Yutaro; Nakano, Masayuki [Institute for Cosmic Ray Research, The University of Tokyo, 5-1-5 Kashiwa-no-Ha, Kashiwa, Chiba 277-8582 (Japan); Furusawa, Akira [Department of Applied Physics, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Kawamura, Seiji [Institute for Cosmic Ray Research, The University of Tokyo, 5-1-5 Kashiwa-no-Ha, Kashiwa, Chiba 277-8582 (Japan)

2016-03-06

In experiments with Fabry–Perot cavities consisting of suspended mirrors, an angular antispring effect on the mirror of the cavity is caused by radiation pressure from resonant light in the cavity. A new method was invented to measure the effect precisely with remote excitation on the mirror using the radiation pressure. This method was found to be available for the suspended 23 mg mirror and improved the measurement accuracy by a factor of two, compared with the previous method. This result leads to stable control systems to eliminate the angular instability of the mirror caused by the effect. - Highlights: • A method to measure an angular antispring effect on a suspended mirror was proposed. • Remote excitation on the mirror with radiation pressure of resonant light is used. • This method provides better measurement accuracy compared with the previous method.

the effect of freezing method on the survival of ram spermatozoa

African Journals Online (AJOL)

Sci.2l, 351. SALAIIiON, S., 1970. The survival of ram spermatozoa following pellet freezing below-79oC. Aust- .1. hiol..n'r. 13. 459. SALAMON, S. & BRANDON, M.R., l97l . Effect of compcition of thawing solution on sunrival of ram spernntozoa iroznn by the pellet method. Aust. J. biol. Sci. 24,355. SALAMON, S. & VISSER, D., ...

The Effect of Inquiry-Based Learning Method on Students' Academic Achievement in Science Course

Science.gov (United States)

Abdi, Ali

2014-01-01

The purpose of this study was to investigate the effects of inquiry-based learning method on students' academic achievement in sciences lesson. A total of 40 fifth grade students from two different classes were involved in the study. They were selected through purposive sampling method. The group which was assigned as experimental group was…

The effect of ligation method on friction in sliding mechanics.

Science.gov (United States)

Hain, Max; Dhopatkar, Ashish; Rock, Peter

2003-04-01

During orthodontic tooth movement with the preadjusted edgewise system, friction generated at the bracket/archwire interface tends to impede the desired movement. The method of ligation is an important contributor to this frictional force. This in vitro study investigated the effect of ligation method on friction and evaluated the efficacy of the new slick elastomeric modules from TP Orthodontics (La Porte, Ind), which are claimed to reduce friction at the module/wire interface. Slick modules were compared with regular nonslick modules, stainless steel ligatures, and the SPEED self-ligating bracket system (Strite Industries, Cambridge, Ontario, Canada). The effect of using slick modules with metal-reinforced ceramic (Clarity, 3M Unitek, Monrovia, Calif) and miniature brackets (Minitwin, 3M Unitek) was also examined. Results showed that, when considering tooth movement along a 0.019 x 0.025-in stainless steel archwire, saliva-lubricated slick modules can reduce static friction at the module/archwire interface by up to 60%, regardless of the bracket system. The SPEED brackets produced the lowest friction compared with the 3 other tested bracket systems when regular modules were used. The use of slick modules, however, with all of the ligated bracket types tested significantly reduced friction to below the values recorded in the SPEED groups. Loosely tied stainless steel ligatures were found to generate the least friction.

A method for screening for the risk of chronic effects of surface water pollution.

Science.gov (United States)

Soldán, Přemysl; Badurová, Jana

2013-01-01

The article describes a method for screening for the risk of chronic surface water pollution which was developed at the T. G. Masaryk Water Research Institute. The approach, which is based on exotoxicological analyses, can be classed as a rapid method of assessment. The degree of risk of chronic effects surface water pollution is determined from an evaluation of two major parameters-toxicity and genotoxicity. As the method utilizes relative simple procedures for sample collection, pretreatment of the sample, chemical analyses, bioassays and results assessment, this approach is suitable for widespread practical use. Extensive utilization of this approach for assessing river basins in the Czech Republic has proved its suitability for a more sophisticated detection of the biological impact of surface water pollution. This is documented in the article where the method is used in a study of the Bílina River, and in the overview of the results of the risk assessment of chronic effects of surface water pollution in selected sections of three international river basins in the Czech Republic.

A comparison of methods to separate treatment from self-selection effects in an online banking setting

NARCIS (Netherlands)

Gensler, S.; Leeflang, P.S.H.; Skiera, B.

The literature discusses several methods to control for self-selection effects but provides little guidance on which method to use in a setting with a limited number of variables. The authors theoretically compare and empirically assess the performance of different matching methods and instrumental

Effectiveness evaluation of whole-body electromyostimulation as a post-exercise recovery method.

Science.gov (United States)

DE LA Camara, Miguel A; Pardos, Ana I; Veiga, Óscar L

2018-01-04

Whole-body electromyostimulation (WB-EMS) devices are now being used in health and sports training, although there are few studies investigating their benefits. The objective of this research was to evaluate the effectiveness of WB-EMS as a post-exercise recovery method, and compare it with other methods like active and passive recovery. The study included nine trained men (age = 21 ± 1years, height = 1.77 ± 0.4 m, mass = 62 ± 7 kg). Three trials were performed in three different sessions, 1 week apart. Each trial, the participants completed the same exercise protocol and a different recovery method each time. A repeated measures design was used to check the basal reestablishing on several physiological variables [lactate, heart rate, percentage of tissue hemoglobin saturation, temperature, and neuromuscular fatigue] and to evaluate the quality of recovery. The non-parametric Wilcoxon and Friedman ANOVA tests were used to examine the differences between recovery methods. The results showed no differences between methods in the physiological and psychological variables analyzed. Although, the blood lactate concentration showed borderline statistical significance between methods (P = 0.050). Likewise, WB-EMS failed to recover baseline blood lactate concentration (P = 0.021) and percentage of tissue hemoglobin saturation (P = 0.023), in contrast to the other two methods. These findings suggest that WB-EMS is not a good recovery method because the power of reestablishing of several physiological and psychological parameters is not superior to other recovery methods like active and passive recovery.

The effect of loading methods and parameters on defect detection in digital shearography

Science.gov (United States)

Yang, Fu; Ye, Xingchen; Qiu, Zisheng; Zhang, Borui; Zhong, Ping; Liang, ZhiYong; Sun, Zeyu; Zhu, Shu

Digital Shearography Speckle Pattern Interferometry (DSSPI) is a non-destructive testing technique, which has a wide range of applications in industrial field due to the merits of non-contact, fast response, full-field measurement and high sensitivity. However, in the real application, the loading methods and parameters usually depend on the experience of the operator, which affect the effectiveness and accuracy of the test. Based on this background and the principle of DSSPI, a model using finite element analysis software and Matlab is established to simulate the defects detections of aluminum plate and composite laminates under different loading conditions. The simulation covers loading methods, shearing direction, shearing amount, loading intensity, defect size, defect depth and defect position. In order to quantify the testing effect, a parameter named the deviation D is first defined. And through the parameter D, the simulation system can evaluate the system detection ability. The work in this paper can provide systematic guidance for the choice of loading methods and parameters in the real DSSPI experiment system.

METHODS OF ASSESSMENT OF THE RELATIVE BIOLOGICAL EFFECTIVENESS OF NEUTRONS IN NEUTRON THERAPY

Directory of Open Access Journals (Sweden)

V. A. Lisin

2017-01-01

Full Text Available The relative biological effectiveness (RBE of fast neutrons is an important factor influencing the quality of neutron therapy therefore, the assessment of RBE is of great importance. Experimental and clinical studies as well as different mathematical and radiobiological models are used for assessing RBE. Research is conducted for neutron sources differing in the method of producing particles, energy and energy spectrum. Purpose: to find and analyze the dose-dependence of fast neutron RBE in neutron therapy using the U-120 cyclotron and NG-12I generator. Material and methods: The optimal method for assessing the relative biological effectiveness of neutrons for neutron therapy was described. To analyze the dependence of the RBE on neutron dose, the multi-target model of cell survival was applied. Results: The dependence of the RBE of neutrons produced from the U-120 cyclotron and NG-120 generator on the dose level was found for a single irradiation of biological objects. It was shown that the function of neutron dose was consistent with similar dependencies found by other authors in the experimental and clinical studies.

Effect of fertilization methods on growth of pear trees, yielding and fruit quality

Directory of Open Access Journals (Sweden)

Tomasz Lipa

2013-04-01

Full Text Available The experiment was carried out in the commercial orchard near Lublin on five-year old pear trees of two cultivars: ‘Conference’and ‘Lukasowka’, planted on Quince MA. The objective of the study was evaluated the reaction of pear on the method of application of fertilizers. In the early spring the surface broadcasting of fertilizers was used (N – 71,5 kg, P 2O5 – 33,0 kg, K 2 O – 114,0 kg and from the May to the middle of August the fertigation was applied (N – 76,4 kg, P 2O5 – 49,5 kg, K 2 O – 84,2 kg. Method of fertilizer’s applications had no significant effect on the growth of evaluated trees. There were no differences in quantity of yield in dependence on the method of fertilization. In the case of cv. ‘Lukasowka’the beneficial influence of the way of fertilization on morphology of fruits (their diameter, height and mass was stated. Such an effect was not observed in the case of the ‘Conference’.

The GMD Method for Inductance Calculation Applied to Conductors with Skin Effect

Directory of Open Access Journals (Sweden)

H. A. Aebischer

2017-09-01

Full Text Available The GMD method (geometric mean distance to calculate inductance offers undoubted advantages over other methods. But so far it seemed to be limited to the case where the current is uniformly distributed over the cross section of the conductor, i.e. to DC (direct current. In this paper, the definition of the GMD is extended to include cases of nonuniform distribution observed at higher frequencies as the result of skin effect. An exact relation between the GMD and the internal inductance per unit length for infinitely long conductors of circularly symmetric cross section is derived. It enables much simpler derivations of Maxwell’s analytical expressions for the GMD of circular and annular disks than were known before. Its salient application, however, is the derivation of exact expressions for the GMD of infinitely long round wires and tubular conductors with skin effect. These expressions are then used to verify the consistency of the extended definition of the GMD. Further, approximate formulae for the GMD of round wires with skin effect based on elementary functions are discussed. Total inductances calculated with the help of the derived formulae for the GMD with and without skin effect are compared to measurement results from the literature. For conductors of square cross section, an analytical approximation for the GMD with skin effect based on elementary functions is presented. It is shown that it allows to calculate the total inductance of such conductors for frequencies from DC up to 25 GHz to a precision of better than 1 %.

EFFECTIVENESS OF ACTIVE TEACHING METHODS FOR THE RESIDENTS OF PHYSICAL MEDICINE AND REHABILITATION

OpenAIRE

Mohan Raj Manjalavil; Reeba Mary Mani; Shehadad Kammili; Sreejith Kalathummarthu; Hemalta Viswan; Sooraj Rajagopal; Shervin Sheriff; Sreedevi Menon Parappil

2017-01-01

BACKGROUND Lecture is the most common teaching aid not only for medical undergraduates, but also specialty residents. There are many disadvantages for this type of teaching. Active teaching methods include didactic lectures followed by interactive sessions, problem-based teaching and hands on demonstration apart from the traditional didactic lecture. The aim of this project was to compare the effectiveness of active teaching method over the didactic lecture to the first year re...

Masking as an effective quality control method for next-generation sequencing data analysis.

Science.gov (United States)

Yun, Sajung; Yun, Sijung

2014-12-13

Next generation sequencing produces base calls with low quality scores that can affect the accuracy of identifying simple nucleotide variation calls, including single nucleotide polymorphisms and small insertions and deletions. Here we compare the effectiveness of two data preprocessing methods, masking and trimming, and the accuracy of simple nucleotide variation calls on whole-genome sequence data from Caenorhabditis elegans. Masking substitutes low quality base calls with 'N's (undetermined bases), whereas trimming removes low quality bases that results in a shorter read lengths. We demonstrate that masking is more effective than trimming in reducing the false-positive rate in single nucleotide polymorphism (SNP) calling. However, both of the preprocessing methods did not affect the false-negative rate in SNP calling with statistical significance compared to the data analysis without preprocessing. False-positive rate and false-negative rate for small insertions and deletions did not show differences between masking and trimming. We recommend masking over trimming as a more effective preprocessing method for next generation sequencing data analysis since masking reduces the false-positive rate in SNP calling without sacrificing the false-negative rate although trimming is more commonly used currently in the field. The perl script for masking is available at http://code.google.com/p/subn/. The sequencing data used in the study were deposited in the Sequence Read Archive (SRX450968 and SRX451773).

Evaluating mediation and moderation effects in school psychology: A presentation of methods and review of current practice

Science.gov (United States)

Fairchild, Amanda J.; McQuillin, Samuel D.

2017-01-01

Third variable effects elucidate the relation between two other variables, and can describe why they are related or under what conditions they are related. This article demonstrates methods to analyze two third-variable effects: moderation and mediation. The utility of examining moderation and mediation effects in school psychology is described and current use of the analyses in applied school psychology research is reviewed and evaluated. Proper statistical methods to test the effects are presented, and different effect size measures for the models are provided. Extensions of the basic moderator and mediator models are also described. PMID:20006988

Numerical study on visualization method for material distribution using photothermal effect

International Nuclear Information System (INIS)

Kim, Moo Joong; Yoo, Jai Suk; Kim, Dong Kwon; Kim, Hyun Jung

2015-01-01

Visualization and imaging techniques have become increasingly essential in a wide range of industrial fields. A few imaging methods such as X-ray imaging, computed tomography and magnetic resonance imaging have been developed for medical applications to materials that are basically transparent or X-ray penetrable; however, reliable techniques for optically opaque materials such as semiconductors or metallic circuits have not been suggested yet. The photothermal method has been developed mainly for the measurement of thermal properties using characteristics that exhibit photothermal effects depending on the thermal properties of the materials. This study attempts to numerically investigate the feasibility of using photothermal effects to visualize or measure the material distribution of opaque substances. For this purpose, we conducted numerical analyses of various intaglio patterns with approximate sizes of 1.2-6 mm in stainless steel 0.5 mm below copper. In addition, images of the intaglio patterns in stainless steel were reconstructed by two-dimensional numerical scanning. A quantitative comparison of the reconstructed results and the original geometries showed an average difference of 0.172 mm and demonstrated the possibility of application to experimental imaging.